@inproceedings{5810, abstract = {{In offices and most other working environments a high speech privacy and a low noise level is desired to allow for concentrated work and calm work conditions. Hence a low Speech Transmission Index (STI) is required, as even irrelevant speech information at lower volumes can be extremly disturbing and performance reducing. At the same time working environments demand for other - often conflicting - requirements such as transparency to ensure visual connections and daylight transmission, functional flexibility for diverse activities in the same space and for hygienic, environmental or security aspects. These requirements have to be balanced by a sensible and intelligent design and layout of absorbers and partition elements and partition. Three research projects investigated an optimised design of low and mid frequency absorbers for working environments to improve the acoustic and design quality of different products. Acoustically optimised indoor spaces may become more important in the future due to an increase of hearing impairments in the aging population as well as in the younger generations. This is seen not only as a technical but as a design challenge to balance optimised sound pressure levels, reverberation times and Speech Transmission Indices. © 2016, German Acoustical Society (DEGA). All rights reserved.}}, author = {{Kirch, Chirstoph and Pottgiesser, Uta}}, booktitle = {{Proceedings of the Inter-Noise 2016}}, editor = {{Kropp, W.}}, keywords = {{Additional requirements, Building types, Room acoustics}}, location = {{Hamburg}}, publisher = {{Deutsche Gesellschaft für Akustik e.V.}}, title = {{{Low and mid frequency design - Implementation of room acoustics in different building types and for different kinds of use}}}, year = {{2016}}, } @inproceedings{584, abstract = {{Due to the continuing trend towards more complexity of products with an increasing number of variants and smaller lot sizes, the assembly often takes place -despite relatively high labor costs in Western industrialized nations -manually or partially automated. An outsourcing or relocation of assembly function abroad is not suitable in most cases.Therefore, it is increasingly important to reduce process variations and waste in manual assembly processes. Assistance systems have the potential, depending on the situation, to assist the worker in his work, to reduce error rate and to increase productivity. In a first part of the paper an overview will be given to different types of assembly assistance systems. Then a morphological chart is developed, which can provide assistance in selecting or comparing assembly assistance systems. With the help of this chart an assembly assistant system is presented. Finally a quick look is taken at further research being done in this area.}}, author = {{Hinrichsen, Sven and Riediger, Daniel and Unrau, Alexander}}, booktitle = {{Production Engineering and Management}}, editor = {{Villmer, Franz-Josef and Padoano, Elio}}, isbn = {{978-3-946856-00-9}}, keywords = {{Assistance systems, Manual assembly, Morphology}}, location = {{Lemgo}}, number = {{01}}, pages = {{3--14}}, title = {{{Assistance Systems in Manual Assembly}}}, year = {{2016}}, } @inproceedings{586, abstract = {{Under the circumstance of advanced globalization, it is increasingly difficult for production companies to remain competitiveness. Many of them are forced to restrict budget and reduce production costs. In addition, the customization of product increases continuously. This results in extension of product variation and reduction of product life cycle. Therefore, the companies need a high flexibility to respond quickly to changes in the market and to customer requirements. Lean thinking, as a powerful tool, has been implemented by many companies in production and manufacturing. In order to avoid waste in lean manufacturing, it is necessary to manage efficiently the material flow. In this study, for a lean material handling system in the lean manufacturing of a company, an in-plant milk-run distribution system is taken into consideration. The system consistsof vehicles, which move periodically in certain routes. The materials are delivered in short intervals from a central storage area to several points of use in the production. By using milk-run in plant, the material handling processes can be standardized and therefore the waste can be eliminated. One additional aim of the study with milk-run distribution for the material provision is to minimize the handling time, which determines directly the personal costs. In order to realize the aim, the work has beendivided into several steps. At first, the production processes, especially the material provision for the production have been analyzed. Secondly, the technological solutions have been analyzed in order to handle different loading units required by different machines in the production. Thirdly, the milk-run distribution for lean production is formulated as an optimization problem with the object of minimizing the number of vehicles and the distance traveled under the constraints of specific time periods, capacity of vehicle and related stations etc. Fourthly, two optimization methods are developed in order to find the optimal solution for the milk-run problem and the performance of different methods is also compared.}}, author = {{Li, Li and Schulze, L.}}, editor = {{Villmer, Franz-Josef and Padoano, Elio}}, isbn = {{978-3-946856-00-9}}, keywords = {{Milk-Run, Material provision, Lean production, Genetic algorithm}}, location = {{Lemgo}}, number = {{1}}, pages = {{65--76}}, title = {{{In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production}}}, year = {{2016}}, } @inproceedings{587, abstract = {{Development engineers are most valued for their excellence in physical product development, but on the flipside, project managers face problems when trying to fit them into effectively running development processes. Because of the advantages of Lean Management in production (Lean Production), process managers often try to transfer lean principles directly to development processes, not considering that major differences exist between well-described production processes and new product development processes which include much more uncertainty and risk. Nevertheless, several lean principals are applicable in product development. This paper describes five lean development insights (LDIs) which were found when optimizing an entire product realization process. Lean principles have been examined and then translated to collaboration between product development and tool manufacturing at a globally operating German family-run company. These LDIs are meant to help project and process managers, consultants and developers to rethink their ways of organizing product development. The application of these insights will result in increased transparency, intensified collaboration, improved processes and quality, shortened lead times, and also eliminate waste.}}, author = {{Riediger, M. and Villmer, Franz-Josef}}, booktitle = {{Production Engineering and Management}}, editor = {{Villmer, Franz-Josef and Padoano, Elio}}, isbn = {{978-3-946856-00-9}}, keywords = {{Lean development, Collaboration, Agile, PLM, Frontloading, Simultaneous engineering}}, location = {{Lemgo}}, number = {{1}}, pages = {{111--122}}, title = {{{Five Insights in Effectively Managing Product Development}}}, year = {{2016}}, } @article{425, abstract = {{Der Maschinen- und Anlagenbau steht vor einer technologischen Veränderung. Diese beinhaltet zum einen die Integration von zunehmenden Funktionen in Maschinen und zum anderen die Vernetzung von Maschinen über das Internet. Diese Entwicklung wird in Deutschland auch mit dem Begriff »Industrie 4.0« gekennzeichnet. Im Zuge dieser Entwicklungen kommt der ergonomischen Gestaltung von Produktionsmaschinen eine entscheidende Bedeutung zu. Anhand einer Studie zur Verwendung von Bildzeichen an Bedienelementen konnte gezeigt werden, dass deutliche ergonomische Verbesserungspotenziale bestehen.}}, author = {{Hinrichsen, Sven and Riediger, Daniel and Adrian, Benjamin}}, issn = {{2191-6268}}, journal = {{Betriebspraxis & Arbeitsforschung}}, pages = {{24--29}}, publisher = {{Heider Verlag}}, title = {{{Ergonomische Gestaltung von Produktionsmaschinen im Kontext der Industrie 4.0}}}, volume = {{224}}, year = {{2015}}, } @article{428, abstract = {{Der Trend einer zunehmenden Produkt- und Variantenvielfalt macht es notwendig, Betriebsmittel so zu planen, dass diese möglichst für ein breites Produktspektrum einsetzbar oder einfach auf neue Produkte oder Produktvarianten umzurüsten sind. Hierdurch entsteht in vielen Branchen der Bedarf nach wandlungsfähigen Fertigungssystemen. Wandlungsfähigkeit oder Rekonfiguration bedeutet, ein Fertigungssystem mit einfachen Mitteln umbauen zu können, um die Systemfunktionen an veränderte oder neue Anforderungen strukturell anzupassen. Diese Anpassungen sollten möglichst ohne Experten erfolgen können. Dazu kann das an die Computertechnik angelehnte Prinzip des „Plug and Produce“ vorteilhaft genutzt werden. In diesem Beitrag wird dieses Prinzip an zwei Fertigungssystemen der Smart Factory OWL, einer gemeinsamen Initiative der Fraunhofer-Gesellschaft und der Hochschule Ostwestfalen-Lippe in Lemgo, erläutert.}}, author = {{Jasperneite, Jürgen and Hinrichsen, Sven and Niggemann, Oliver}}, issn = {{0170-6012}}, journal = {{Informatik-Spektrum}}, number = {{3}}, pages = {{183--190}}, publisher = {{Springer-Verlag GmbH}}, title = {{{,,Plug-and-Produce“ für Fertigungssysteme - Anwendungsfälle und Lösungsansätze}}}, volume = {{38}}, year = {{2015}}, } @inproceedings{431, abstract = {{Der Trend einer zunehmenden technologischen Komplexität von Produktionsmaschinen ist vor allem auf die Integration zusätzlicher Funktionen in Maschinen zurückzuführen. Damit nehmen auch die Anforderungen an die Gebrauchstauglichkeit der Bediensysteme weiter zu. Das Ziel der Studie ist es, die intuitive Bedienbarkeit von fünf modernen Produktionsmaschinen im Hinblick auf die verwendeten grafischen Symbole (Icons) zu untersuchen und Handlungsempfehlungen abzuleiten. Die Ergebnisse der Studie zeigen, dass die verwendeten Bildzeichen an den untersuchten Maschinen nur bedingt selbsterklärend und intuitiv gestaltet sind und somit deutliche Defizite für eine einfache und intuitive Bedienung aufweisen. Im Ergebnis werden Hinweise zur Gestaltung von Bildzeichen an Produktionsmaschinen aufgeführt.}}, author = {{Riediger, Daniel and Hinrichsen, Sven and Schlee, Alexander}}, booktitle = {{VerANTWORTung für die Arbeit der Zukunft : 61. Kongress der Gesellschaft für Arbeitswissenschaft : Karlsruher Institut für Technologie, Institut für Arbeitswissenschaft und Betriebsorganisation}}, isbn = {{978-3-936804-18-8 }}, location = {{Karlsruhe}}, publisher = {{Gesellschaft für Arbeitswissenschaft e.V. }}, title = {{{Ergonomische Gestaltung von grafischen Bedienelementen an Produktionsmaschinen}}}, year = {{2015}}, } @inproceedings{432, abstract = {{The trend of increasing technological complexity of machines mainly correlates with the integration of additional functions in machines. Increasing functionality of the machines leads to an increased number of control elements, which limits the clarity of the machine operation and leads to higher cognitive demands in the machine operation. Due to the growing functional range of production machines the demand of usability for the operating systems continues to grow. The selection and design of icons for the identification of controls contributes significantly to usability, especially for intuitive operation of production machines. The aim of this study is to investigate the intuitive usability of production machines, to consider its use of graphical elements (icons) and to derive recommendations for a demand-oriented selection and design of icons. To achieve this goal, laboratory studies at five modern production machines (laser sintering machine, CNC universal lathe, plastic injection molding machine, laser processing machine, woodworking machine) - each with different operating concept - were performed. The results of the study show that the used symbols in the examined machines are only limited self-explanatory and intuitive, and thus have significant deficits for easy and intuitive operation. Especially the combination of screens and electronic keys or switches was often criticized and leads to uncertainty in the operation. As a result, recommendations for the design of icons on production machines are given. }}, author = {{Riediger, Daniel and Hinrichsen, Sven and Schlee, Alexander}}, booktitle = {{Production Engineering and Management}}, editor = {{Villmer, Franz-Josef and Padoano, Elio}}, isbn = {{978-3-941645-11-0}}, keywords = {{Usability, production mach ine, icons, usability, hum an-machine compatibility}}, location = {{Trieste}}, number = {{1}}, pages = {{123--130}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Ergonomic Design of Graphical Control Elements on Production Machines}}}, year = {{2015}}, } @inproceedings{687, author = {{Büttner, Sebastian and Sand, Oliver and Röcker, Carsten}}, booktitle = {{Proceedings of the 17th International Conference on Human-Computer Interaction with Mobile Devices and Services Adjunct}}, isbn = {{978-1-4503-3653-6}}, keywords = {{Augmented Reality, Manufacturing, Mobile Projection}}, location = {{Kopenhagen, Denmark}}, pages = {{1130--1133}}, publisher = {{ACM}}, title = {{{Extending the Design Space in Industrial Manufacturing Through Mobile Projection}}}, doi = {{10.1145/2786567.2794342}}, year = {{2015}}, } @article{688, abstract = {{In this paper, we analyze the specific requirements of interacting with cyber-physical systems and propose a design approach that is driven by user needs and makes use of an expanded toolbox that contains state-of-the-art interaction technologies including Smart Glasses and Wearables. We present several examples of assistance systems in industrial production that use these interaction technologies and discuss the corresponding usability and implementation aspects. }}, author = {{Paelke, Volker and Röcker, Carsten and Koch, Nils and Flatt, Holger and Büttner, Sebastian}}, issn = {{2196-677X}}, journal = {{at - Automatisierungstechnik}}, keywords = {{User centred design, user interfaces, user expe-rience, cyber-physical systems, smart glasses, wearables}}, number = {{10}}, pages = {{833--843}}, publisher = {{De Gryter Oldenbourg}}, title = {{{User Interfaces for Cyber-Physical Systems : Expanding the Designer’s Toolbox}}}, doi = {{10.1515/auto-2015-0016}}, volume = {{63}}, year = {{2015}}, } @inproceedings{588, abstract = {{While common measurement techniques like gloss or color measurement are widely used in industry for quality assessment of furniture high gloss surfaces, they indicate only a weak correlation to the quality perceived by the customer. Topography based approaches achieve higher correlation to human perception but are often based on linear measurement which cannot be applied for an overall assessment of larger surfaces. Thus an algorithm was developed to calculate a specific value based on topographic features, such as orange peel, within the research project ‘Development of a comprehensive quality concept for furniture high gloss surfaces’, funded by the federal Ministry of Education and Research. For the evaluation of short waved structures on furniture high gloss surfaces the ratio of hill height to hill area was chosen. This parameter proves to be applicable for an evaluation of the extent of a single. }}, author = {{Huxol, Andrea and Riegel, Adrian and Dekomien, Kerstin}}, booktitle = {{Production Engineering and Management}}, editor = {{Padoano, Elio and Villmer, Franz-Josef}}, isbn = {{978-3-941645-11-0}}, keywords = {{High gloss, surface measurement, topographic features, quality assessment}}, location = {{Trieste, Italy}}, number = {{1}}, pages = {{99--110}}, title = {{{Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception}}}, year = {{2015}}, } @inproceedings{597, abstract = {{This paper is aimed to discuss current research using data mining techniques and industry statistics in production environments. The general research approach is based on the idea of using data mining processes and techniques of industry statistics to find rare and hidden patterns behind failures of complex components. A case study will be applied to illustrate how the technique is carried out and where the limits of this approach occur. The case study deals with a component supplier of printing machines, which received an increasing number of client complaints, all related to one distinct problem. The observed failures seem to occur only among clients with very high quality standards. The affected component undergoes a very complex production process with several steps in different departments. Every single production unit records data information from multiple process variables and at different points in time. In the beginning there was no understanding of the failure causes in production at all. Therefore a huge amount of production data had to be analyzed to find the pattern that discloses the failure. The data mining process starts with a first step in which the given data sets are prepared and then cleaned. Followed up by building a prediction model. The aim is to detect the root causes for failures and to predict potential failures in affected components. This paper shows how to use data mining to get the answer on pressing production failures. }}, author = {{Scheideler, Eva and Ahlemeyer-Stubbe, Andrea}}, booktitle = {{Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy}}, editor = {{Padoano, Elio and Villmer, Franz-Josef}}, isbn = {{978-3-941645-11-0}}, keywords = {{Data mining, production failure, multi-variant analysis, multivariate process control, predictive modelling, case study}}, location = {{Trieste, Italy}}, number = {{1}}, pages = {{163--174}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Data Mining: A Potential Detector to Find Failure in Complex Components}}}, year = {{2015}}, } @inproceedings{598, abstract = {{The aerospace sector is characterized by long product life cycles and a need for lightweight design. Additive manufacturing is a technology that produces parts layer by layer and thus enables the manufacturing of any complex parts at nearly no extra costs. A topology optimization enhances the part’s performance for their special purpose. The results are often complex bionic structures that cannot be produced with conventional manufacturing technologies. The paper analyzes how the high potential of this technologycan be applied to aerospace parts. A topology optimization will be conducted for an aircraft part explaining the crucial points and a life cycle analysis examines the achieved sustainable improvements for the aircraft’s life cycle. }}, author = {{Huxol, Andrea and Villmer, Franz-Josef}}, booktitle = {{Production Engineering and Management}}, editor = {{Padoano, Elio and Villmer, Franz-Josef}}, isbn = {{978-3-941645-11-0}}, keywords = {{Additive manufacturing, topology optimization, aerospace, life cycle costs}}, location = {{Trieste, Italy}}, number = {{1}}, pages = {{207--218}}, title = {{{Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies}}}, year = {{2015}}, } @inproceedings{599, abstract = {{Order picking has long been identified as the most labor costly and intensively activity in warehouse management. The orders from the customers need to be fulfilled tightly and timely. In order to keep the required high service level, the warehouse has to increase the picking productivity under the constraints of limited capacity. This paper concerns a man-togoods order picking system, in which the order pickers have to drive with a pallet jack to the storage locations. Considering that the orders are mostly small orders which consist of less lines, it is efficient to combine severalsingle customer orders into one picking order. Under this circumstance, this paper intends to answer the question of how customer orders should be grouped into picking orders with the aim of minimizing the total travel length through the warehouse. Consequently the productivity of the order picking system can be improved. An optimization problem for order batching is introduced. The optimization method of order batching is then proposed. Based on the simulation of different scenarios of incoming orders, it can be concluded that the developed method is effective in improving the productivity of the concerned order picking system. }}, author = {{Li, Li and Schulze, L.}}, booktitle = {{Production Engineering and Management}}, editor = {{Padoano, Elio and Villmer, Franz-Josef}}, isbn = {{978-3-941645-11-0}}, keywords = {{Order picking, man-to-goods, order batching, picking productivity, genetic algorithm}}, location = {{Trieste, Italy}}, number = {{1}}, pages = {{319--326}}, title = {{{Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching}}}, year = {{2015}}, } @inbook{5214, author = {{Pottgiesser, Uta}}, booktitle = {{Entwurfs- und Konstruktionstafeln für Architekten }}, editor = {{Holschemacher, K.}}, isbn = {{ 978-3-410-25040-1 }}, pages = {{Kapitel 2C: 2.49--2.82}}, publisher = {{Beuth}}, title = {{{Baukonstruktion - Innenausbau}}}, year = {{2015}}, } @proceedings{335, abstract = {{The University of Trieste (Università degli Studi di Trieste) and the Ostwestfalen-Lippe University of Applied Sciences introduced the International Double Degree Master Program ‘Production Engineering and Management’ in 2011. Its aim is to give students in Italy and Germany, along with other countries, the chance to learn the necessary abilities from lecturers and each other. This Master Program has been accompanied by the International Conference ‘Production Engineering and Management’ from the very beginning. The annual International Conference on Production Engineering and Management took place for the fifth time this year, and can therefore be considered a well-established event originating from the partnership between the University of Trieste (Italy) and the Ostwestfalen-Lippe University of Applied Sciences (Germany). The main aim of the five conferences has been to bridge the gap between production engineering and management theory and practice, by offering a platform where academia and industry could discuss practical and pressing questions. In this respect, the fifth conference (PEM 2015) continues along the same path of the first four successful conferences, which were held in Pordenone (2011), Lemgo (2012), Trieste (2013) and again in Lemgo (2014). PEM 2015 benefited further from contributions from other universities and from research and industry projects. Especially the contributions of successful graduates of the double degree Master’s program Production Engineering and Management and those of other postgraduate researchers from several European count ries have been enforced in this year. The title ‘An active interaction between university and industry’ introduced two years ago to emphasize lively cooperation proved to be more than appropriate in the conference’s main orientation: • To present current research projects and their results at a highly sophisticated scientific level • To discuss recent developments in industry and society • To bring professionals, specialists and students together • To enable professionals, lecturers and professors to exchange experiences • To familiarize young professionals and students with scientific conference procedures • To give postgraduate and Ph.D. students the chance to present a paper • To show the two partner regions’ uniqueness and performance • To attract students for an international career in the industry • To encourage students to be open-minded about different cultures, mentalities and manners PEM 2015 took place between October 1 and 2, 2015 at the University of Trieste. The program was defined by the Organizing and Scientific Committees and clustered into five scientific sessions. Both universities and their partner organizations debated on these topics by reporting their research, experiences and success stories. The scientific sessions dealt with technical and engineering issues, as well as management topics, and included contributions by researchers from academia and industry. The extended abstracts and full papers of the contributions underwent a double-blind review process. The 35 accepted presentations were assigned, according to their subject, to one of the following sessions:, ‘Industrial Engineering and Lean Management’, ‘Technology and Supporting Services for Manufacturing’, ‘Product Lifecycle, from Concept to Market and Use’, ‘Supply Chain Design and Management’ and ‘Management Practices and Methodologies’. These sessions have been carefully selected by the organizing and scientific committees and are aimed at highlighting some of the current production industry’s most discussed topics. Therefore, the articles sustainability and revolutionary developments in modern industry and cover not only production in a narrower sense, but also new aspects of: innovation and product development, of supply chains, of quality improvement. The proceedings have been drawn together to form 35 full papers of the scientific contributions. The articles were reviewed by the Scientific Committee before being accepted. As the editors of the proceedings, we would like to thank all contributors, the referees who accepted the burden of reviewing the abstracts as well as the full papers and the members of the Organizing Committee and Scientific Committee for planning such an effective conference.}}, editor = {{Padoano, Elio and Villmer, Franz-Josef}}, isbn = {{978-3-941645-11-0}}, location = {{Trieste, Italy}}, number = {{.}}, pages = {{418}}, title = {{{Production Engineering and Management}}}, volume = {{11}}, year = {{2015}}, } @inbook{5219, author = {{Pottgiesser, Uta}}, booktitle = {{Zukunftsstadt 2050 : Futury City 2050 }}, editor = {{Heusler, Winfried}}, title = {{{Konzepte statt Prognosen}}}, year = {{2015}}, } @inproceedings{5292, abstract = {{Many workspaces in open-plan offices suffer from high noise levels and undesired transmissions of speech noise between the users. These are leading to increased distraction by irrelevant speech information. This acoustical overall situation has serious consequences for the working environment: concentration- and performance loss as well as impairments of mood and well-being. Surveys on disturbing sounds have proven that human language distracts much more than sounds that are generated by natural sources or technical devices. Especially in times of changing working structures, when flexible spaces promoting interaction gain an increasing importance, room acoustics have to ensure that all negative impairments caused by noise and speech sound are prevented. Different measures and concepts come into question for acoustical optimization: absorption, shielding and sound-masking. Absorption can be achieved by means of acoustically-effective ceilings, floorings or furniture although these singular measures are often not sufficient. Sophisticated sound-absorbing systems are in the market. To reduce disturbing speech information sufficiently, advanced sound-shielding measures between the working areas are required. To efficiently prevent speech-like noise an adaptive sound-masking system in combination with visually adapted shielding elements should be developed, tested and implemented for open-plan offices in the presented research. The studies have shown that the design of these absorbing and shielding elements is a relevant factor as any conformity between spatial design and sound helps to improve the user acceptance. It was further verified by tests that permanent movements in the peripheral field of vision of the test persons were perceived as distracting and annoying. Thus the sound-masking was placed outside the field of vision. In general the user acceptance of masking sounds was assessed more positively when combined with a visualisation (e.g. covering with „leaves“) compared to the variant without any covering. But the whole system has to be further developed.}}, author = {{Pottgiesser, Uta and Kirch, Christoph}}, booktitle = {{Conference: 31st International PLEA ConferenceAt: BolognaVolume: Proceedings of PLEA2015 Architecture in (R)Evolution - Book of Abstracts.}}, isbn = {{978-88-941163-0-4}}, location = {{Bologna}}, publisher = {{ [Ass. Building Green Futures]}}, title = {{{Improving Room Acoustics in open-plan Offices. Testing the Relationship of acoustical and visual Distraction at Workspaces with sound-masking Systems}}}, year = {{2015}}, } @inproceedings{585, abstract = {{Many low-cost 3D printers have been brought to market over the last couple of years. Most of them apply a Fused Layer Manufacturing (FLM) process, and have made 3D printing a great success amongst hobbyists, the maker community and students. One drawback of such inexpensive equipment is a limited build envelope, which prevents this from becoming a significant contributor to industrial production. To overcome these limits, it is not sufficient to simply upscale dimensions, but the overall concept of such machines must be completely re-thought, as well as the concepts behind several building blocks, components and the process software system. Problems such as shrinkage of build material, support material and machine parts in combination with long printer head travels, temperature distribution and moisture effects all have to be solved. In addition, larger parts need longer process times. Therefore, reduction of process times and an increase in productivity are necessary in order to enable economic production. Some of these problems can be solved by using more than one printer head for production, by using new materials and inventing new nozzle systems as distinct solutions for big printers. Nevertheless, to solve all these problems, the development of special machines for large parts is necessary: not component-wise but as a whole system. Large parts could then be successfully produced in several industries, using large, inexpensive FLMmachines. }}, author = {{Villmer, Franz-Josef and Witte, Lars}}, booktitle = {{Production Engineering and Management}}, editor = {{Padoano, Elio and Villmer, Franz-Josef}}, isbn = {{978-3-941645-11-0}}, keywords = {{3D printing, FLM, build envelope, large-scale, thermoplastic polymers}}, location = {{Trieste, Italy}}, number = {{1}}, pages = {{111--122}}, title = {{{Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself}}}, year = {{2015}}, } @proceedings{589, editor = {{Villmer, Franz-Josef and Padoano, Elio}}, isbn = {{978-3-941645-10-3}}, location = {{Lemgo}}, pages = {{301}}, title = {{{Production Engineering and Management}}}, volume = {{10}}, year = {{2014}}, } @inproceedings{665, abstract = {{The requirements of assembly systems are changing, due to trends such as shorter innovation and product lifecycles as well as an increase in the number of product variants and product customization. Certain markets are characterized by demand volatility and short delivery schedules. As a result of shortened product and innovation lifecycles and demand volatility, the assembly system design should be versatile. The aim of this paper is to demonstrate a versatile assembly system which was jointly developed by the Fraunhofer IOSB-INA and the Ostwestfalen-Lippe University of Applied Sciences. }}, author = {{Hinrichsen, Sven and Jasperneite, Jürgen and Schrader, Florian and Lücke, Benedikt}}, booktitle = {{Production Engineering and Management}}, editor = {{Villmer, Franz-Josef and Padoano, Elio}}, keywords = {{Assembly System, Versatility, Modularity}}, location = {{Lemgo}}, number = {{10}}, pages = {{37--45}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Versatile Assembly Systems - Requirements, Design Principles and Examples}}}, year = {{2014}}, } @article{669, abstract = {{'Industrie 4.0', die vierte industrielle Revolution, hat die Holz- und Möbelindustrie bislang kaum erreicht. Generell werden Schlüsselinnovationen in dieser Branche mit Zeitverzug eingeführt, der sich allerdings in letzter Zeit verkürzt hat. Industrie 4.0 ist die informationstechnologische Vernetzung aller an der Produktionskette beteiligten Elemente. Zu den Kernelementen für die Produktion zählen das Internet der Dinge und der Dienste, CPS, Smart Factory, Smart Tag, Augmented Reality sowie Mobile/Wearable Devices. Seit 2013 wurden die Aktivitäten von der 'Plattform Industrie 4.0' gebündelt und unterstützt. Erste Forschungsergebnisse liegen vor. Aufgrund erheblicher Fördergelder, insbesondere vom BMBF, wird mit weiteren Ergebnissen in den nächsten Jahren gerechnet. Mit Industrie 4.0 wird versucht, einen Technologie-Push auszulösen, dem in der Holz-und Möbelindustrie nicht in allen Fällen ein Nachfrage getriebener Pull gegenübersteht. Die tabellarische Übersicht informiert über die Kernelemente von Industrie 4.0 und deren Potenzial.}}, author = {{Riegel, Adrian and Kortüm, Christian and Hinrichsen, Sven}}, issn = {{0018-3822}}, journal = {{HOB, Holzbearbeitung}}, keywords = {{Holzverarbeitende Industrie, industrielle Revolution}}, number = {{4}}, pages = {{29--33}}, publisher = {{A.G.T.-Verl.}}, title = {{{Industrie 4.0 - Potenziale in der Holz- und Möbelindustrie (Teil 1)}}}, volume = {{61}}, year = {{2014}}, } @inproceedings{670, abstract = {{Trotz einer zunehmenden Bedeutung additiver Fertigungsverfahren liegen bisher noch keine umfassenden ergonomischen Untersuchungen zur Arbeit an Maschinen der additiven Fertigung vor. In der vorliegenden Studie wurden daher die Arbeitsprozesse an Lasersintermaschinen über REFA-Ablauf- und Zeitstudien untersucht. Die Vorgehensweise orientierte sich dabei an der Norm DIN EN ISO 9241-210:2010 und beinhaltete die Erfassung des Nutzungskontextes, die Durchführung von Usability-Tests und die Entwicklung von Gestaltungsempfehlungen.}}, author = {{Riediger, Daniel and Hinrichsen, Sven and Villmer, Franz-Josef}}, booktitle = {{Gestaltung der Arbeitswelt der Zukunft : 60. Kongress der Gesellschaft für Arbeitswissenschaft }}, isbn = {{978-3-936804-17-1}}, location = {{München}}, number = {{1}}, pages = {{94--96}}, publisher = {{GfA-Press}}, title = {{{Ergonomische Gestaltung von Arbeitsprozessen in der additiven Fertigung}}}, year = {{2014}}, } @inproceedings{671, abstract = {{Additive manufacturing processes such as laser sintering are characterized by a high rate of innovation, are a standard procedure in rapid prototyping and are becoming increasingly important in small-series production. Despite the growing importance of additive manufacturing processes, there are no comprehensive ergonomic studies about work using additive manufacturing systems. This study therefore investigates the working processes of laser sintering systems. The method is guided by the DIN EN ISO 9241-210:2011 standard and helps to record the context of use, to accomplish usability tests and to develop design recommendations. The outcome of the study shows that the efficiency of the laser sintering operating process can be significantly increased by implementing ergonomic recommendations and consequently further improve the employees’ working conditions.}}, author = {{Riediger, Daniel and Hinrichsen, Sven and Villmer, Franz-Josef}}, booktitle = {{Production Engineering and Management}}, editor = {{Villmer, Franz-Josef and Padoano, Elio}}, keywords = {{ergonomic design, additive manufacturing, laser sintering, usability}}, location = {{Lemgo}}, number = {{10}}, pages = {{61--68}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Ergonomic Design of Laser Sintering Systems - Results of an Empirical Study}}}, year = {{2014}}, } @inproceedings{5221, author = {{Martau, Betina Tschiedel and da Silva, F. Duro and Pottgiesser, Uta}}, booktitle = {{Proceedings of 5th seminar DOCOMOMO Norte/Nordeste}}, location = {{Fortaleza: Brazil}}, title = {{{Estratégias de intervenções para requalificação e valorização do patrimônio arquitetônico moderno : estudo de caso no edificio da smov em Porto Alegre}}}, year = {{2014}}, } @inproceedings{5222, author = {{Doleschal, Reinhard and Pottgiesser, Uta and Akhilesh, K. B. and Kabre, Chitrarekha and König, Katharina}}, booktitle = {{Sustainable habitat for developing societies : choosing the way forward : 30th International PLEA Conference, December 16-18, 2014 : book of abstracts}}, editor = {{Rawal, Rajan}}, isbn = {{978-93-83184-02-6 }}, location = {{Ahmedabad, India }}, publisher = {{CEPT University Press}}, title = {{{Integrating user awareness and behavior into building and product design for India : survey in eight giant cities in India}}}, year = {{2014}}, } @proceedings{5223, editor = {{Tomlow, Jos and Dill, Alex and Pottgiesser, Uta}}, isbn = {{ 978-3-929744-89-7 }}, location = {{Karlsruhe}}, number = {{13}}, pages = {{ 88 Seiten }}, publisher = {{Graphische Werkstätten Zittau }}, title = {{{Perceived technologies in the modern movement 1918-1975 : proceedings of the 13th International DOCOMOMO Technology Seminar, january 25/26 2013, Karlsruhe . the seminar figures also as the 10. Karlsruher Tagung "Das architektonische Erbe" / International Working Party for Documentation and Conservation of Buildings, Sites and Neighbourhoods of the Modern Movement }}}, year = {{2014}}, } @inbook{11634, author = {{Rohler, Hans-Peter and Fritz, Harald}}, booktitle = {{Baukultur Verkehr: Orte, Prozesse, Strategien}}, editor = {{Braum, Michael and Klauser, Wilhelm}}, isbn = {{978-3-906027-19-7}}, pages = {{76–83}}, publisher = {{Bundesstiftung Baukultur}}, title = {{{Von der Idee zur Umsetzung : Neubewertung bestehender Infrastrukturen am Beispiel der Parkautobahn A42}}}, year = {{2013}}, } @proceedings{725, editor = {{Padoano, Elio and Villmer, Franz-Josef}}, isbn = {{978-3-941645-09-7}}, location = {{Trieste, Italy}}, pages = {{282}}, title = {{{Production Engineering and Management}}}, volume = {{9}}, year = {{2013}}, } @article{6669, author = {{Fiebig, Isabel and Lohr, Mathias}}, issn = {{0723-6514}}, journal = {{Libellula}}, number = {{32}}, pages = {{115 -- 139}}, publisher = {{Gesellschaft Deutschsprachiger Odonatologen}}, title = {{{Libellengemeinschaften oligotroph-saurer Sekundärgewässer im Solling, Süd-Niedersachsen (Odonata)}}}, year = {{2013}}, } @article{6670, author = {{Lohr, Mathias}}, issn = {{1860-7640 }}, journal = {{Beiträge zur Naturkunde zwischen Egge und Weser}}, pages = {{23 -- 40}}, publisher = {{NEW}}, title = {{{Zur Bestäubungsökologie des Frauenschuh, Cypripedium calceolus, im Weserbergland (Orchidaceae; Insecta: Hymenoptera)}}}, volume = {{24}}, year = {{2013}}, } @inbook{5228, author = {{Pottgiesser, Uta}}, booktitle = {{Entwurfs- und Konstruktionstafeln für Architekten}}, editor = {{Holschemacher, Klaus}}, isbn = {{978-3-410-23284-1}}, pages = {{Kapitel 2C: 2.49--2.82}}, publisher = {{Beuth}}, title = {{{Baukonstruktion - Innenausbau}}}, year = {{2013}}, } @article{5229, author = {{Pottgiesser, Uta and Ashour, Anan}}, issn = {{1437-0999}}, journal = {{Sonderheft: Innovative Fassadentechnik 2013 ; Erschienen in: Bautechnik : Zeitschrift für den gesamten Ingenieurbau}}, number = {{9}}, pages = {{6--10}}, title = {{{Design vs. Development : neue Ansätze}}}, volume = {{90}}, year = {{2013}}, } @article{5230, author = {{Kabre, Chitra and Pottgiesser, Uta}}, issn = {{0973-8339}}, journal = {{Abacus}}, number = {{2}}, title = {{{Education for sustainable architecture : experiences from a transnational desgin studio}}}, volume = {{8}}, year = {{2013}}, } @proceedings{5231, editor = {{Pottgiesser, Uta and Knaack, Ulrich and Böke, Jan-Hendrik}}, isbn = {{ 978-3-939349-21-1 }}, location = {{Detmold}}, pages = {{249}}, publisher = {{ Hochschule Ostwestfalen-Lippe}}, title = {{{facade2013 - design vs. development}}}, year = {{2013}}, } @inbook{5232, abstract = {{The tremendous population growth and the booming economy in India have a lot of critical impacts on energy demand, consumption, and supply in the next decades. Natural resources as well in India are limited, but particularly the growing middle class with increasing incomes wants to improve their quality of life. This contradiction can only be solved with a strategic energy efficiency scheme in India. This chapter deals with the threats and opportunities of the building development in the next decades. Today, 40 % of the total energy consumption worldwide is covered by residential and nonresidential buildings. Energy- and cost-efficient design, material use, and maintenance of old and new buildings interwoven with higher user mobility are crucial points of smart cities in the future. Therefore, education, particularly higher education; R&D; and climate-related innovations are the main drivers for a better quality of life and for the more participation in fighting against the climate change. In an ongoing user study in five big Indian cities, we want to explore the awareness of the Indian people in urban areas between the contradictory contexts of energy consumption and the needs and expectations of comfortable living.}}, author = {{Doleschal, Reinhard and Pottgiesser, Uta}}, booktitle = {{Emerging Dimensions of Technology Management}}, editor = {{Akhilesh, K:B:}}, isbn = {{978-81-322-0791-7}}, keywords = {{Corporate Social Responsibility, Energy Efficiency, Building Stock, Sustainable Consumption, Global Institute}}, pages = {{121--134}}, publisher = {{Springer}}, title = {{{Innovation and Implementation of Climate-Related Energy-Efficient Building Design in India}}}, doi = {{10.1007/978-81-322-0792-4_9}}, year = {{2013}}, } @book{5233, author = {{Pottgiesser, Uta and Strauß, Holger}}, isbn = {{978-3-0346-0841-1}}, pages = {{ 176 }}, publisher = {{Birkhäuser Verlag }}, title = {{{ Product Development and Architecture. Visions, Methods, Innovations }}}, year = {{2013}}, } @book{5242, author = {{Pottgiesser, Uta and Wiewiorra, Carsten}}, isbn = {{978-3-86922-155-7}}, keywords = {{Innenausbau, Innenarchitektur}}, pages = {{389}}, publisher = {{DOM Publishers}}, title = {{{Entwurfs- und Planungshilfe: Raumbildender Ausbau}}}, year = {{2013}}, } @article{5258, author = {{Pottgiesser, Uta and Kirch, Christoph}}, issn = {{ 0173-8046 }}, journal = {{AIT : Architektur, Innenarchitektur, technischer Ausbau}}, number = {{10}}, pages = {{150--153}}, publisher = {{Verlagsanstalt Alexander Koch GmbH}}, title = {{{ACOUSTIC : Raumakustische Systeme für Büro-, Gewerbe- und Industriebauten im Vergleich}}}, year = {{2013}}, } @article{6671, author = {{Lohr, Mathias and Brust, Vera and Riedl, Ulrich}}, issn = {{1860-7640 }}, journal = {{Beiträge zur Naturkunde zwischen Egge und Weser}}, pages = {{3 -- 34}}, publisher = {{NEW}}, title = {{{Feldvögel im Kreis Höxter (NRW) – Habitatnutzung und Auswirkungen des Anbaus nachwachsender Rohstoffe auf die Avifauna}}}, volume = {{23}}, year = {{2012}}, } @book{5259, author = {{Kabre, Chitra and Pottgiesser, Uta}}, title = {{{Climate responsive façades for public buildings in tropical Climates}}}, year = {{2012}}, } @proceedings{5260, editor = {{Pottgiesser, Uta and Kabre, Chitra and Sharma, J. P. }}, isbn = {{978-93-5067-137-5 }}, location = {{Murthal}}, pages = {{449}}, title = {{{Energy Efficient Design of Building & Cities }}}, year = {{2012}}, } @inproceedings{5261, author = {{Pottgiesser, Uta}}, booktitle = {{Proceedings of the 12th International DOCOMOMO Conference}}, isbn = {{9789529323005}}, location = {{Helsinki, Finnland}}, title = {{{Monuments of industry and infrastructure as a challenge for re-use!}}}, year = {{2012}}, } @misc{11640, author = {{Rohler, Hans-Peter and Fritz, Harald}}, booktitle = {{Garten und Landschaft}}, number = {{10}}, pages = {{22–25}}, publisher = {{Georg GmbH}}, title = {{{Panoramastraße statt grüner Tunnel : Managementkonzept für das Begleit-grün der A42 durchs Ruhrgebiet}}}, volume = {{119}}, year = {{2011}}, } @misc{11641, author = {{Rohler, Hans-Peter and Fritz, Harald}}, booktitle = {{Stadt und Grün}}, issn = {{0948-9770 }}, number = {{1}}, pages = {{27–31}}, publisher = {{Patzer}}, title = {{{Parkautobahn A42 : Erschließungsrückgrat des Emscher Landschaftsparks}}}, year = {{2011}}, } @inbook{11643, author = {{Harald, Fritz and Rohler, Hans-Peter}}, booktitle = {{Parkautobahn A42}}, editor = {{Dettmar, Jörg}}, pages = {{52--53}}, publisher = {{Ruhr.2010}}, title = {{{Parkautobahn A42 – Oder Was Innovtion Und Alltagslandschaft gemeinsam Haben Können}}}, year = {{2011}}, } @misc{11647, author = {{Rohler, Hans-Peter}}, booktitle = {{Stadt und Grün}}, issn = {{0948-9770}}, number = {{3}}, pages = {{64 ff}}, publisher = {{Patzer Verlag}}, title = {{{Regionalpark RheinMain - Aufbruch in Eine Neue Dekade Der Parkentwicklung}}}, year = {{2011}}, } @article{6672, author = {{Liebelt, Ralf and Lohr, Mathias and Beinlich, Burkhard}}, issn = {{1860-7640 }}, journal = {{Beiträge zur Naturkunde zwischen Egge und Weser}}, pages = {{3 -- 18}}, publisher = {{NEW}}, title = {{{Zur Verbreitung der Gestreiften und der Zweigestreiften Quelljungfer (Cordulegaster bidentata und C. boltonii) im Kreis Höxter (Insecta, Odonata, Cordulegastridae)}}}, volume = {{22}}, year = {{2011}}, } @inbook{3573, author = {{Lohr, Mathias and Riedl, Ulrich}}, booktitle = {{Landschaftsarchitektur und Umweltplanung im Verbund - Aktuelle Aufgaben und internationale Kooperationen }}, pages = {{43 -- 49}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Landschaft „be-greifen“ – ein interdisziplinäres Studienprojekt zur ökologischen Landschaftsanalyse}}}, year = {{2011}}, } @article{5262, author = {{Strauß, Holger and Pottgiesser, Uta}}, issn = {{1437-0999}}, journal = {{Die Bautechnik}}, number = {{9}}, title = {{{European Facade Network (EFN) : interdisziplinäre Kooperation im europäischen Kontext}}}, volume = {{88}}, year = {{2011}}, } @proceedings{5263, editor = {{Pottgiesser, Uta}}, isbn = {{ 978-3-939349-17-4 }}, pages = {{ 177 Seiten }}, publisher = {{ Hochschule OWL }}, title = {{{ facade2011 - super green. conference volume : ConstructionLab }}}, year = {{2011}}, } @article{5265, author = {{Pottgiesser, Uta}}, issn = {{1071-7641}}, journal = {{Journal of Interior Design}}, number = {{4}}, pages = {{5--14}}, publisher = {{Wiley-Blackwell}}, title = {{{Interior design as an academic discipline in Germany}}}, doi = {{10.1111/j.1939-1668.2011.01062.x}}, volume = {{36}}, year = {{2011}}, } @proceedings{5266, editor = {{Pottgiesser, Uta and Parode, Fabio}}, isbn = {{978-85-61818-18-0 }}, location = {{Porto Alegre, Brazil}}, title = {{{Recycling Design : Germany-Brazil}}}, year = {{2011}}, } @inbook{11632, author = {{Rohler, Hans-Peter and Dettmar, Jörg}}, booktitle = {{Der produktive Park: Denkschrift zum Emscher Landschaftspark; anlässlich des Europäischen Zukunftskongresses "Unter Freiem Himmel" am 30. September und 1. Oktober 2010 in Essen, Welterbe Zollverein, Schacht XII}}, editor = {{Scheuvens, Rudolf}}, isbn = {{978-3-902707-06-2}}, location = {{Essen}}, pages = {{150–155}}, publisher = {{Techn. Univ. Wien, Dep. für Raumentwicklung, Infrastruktur- und Umweltplanung}}, title = {{{Eine regionale Pflegestrategie als zentrale Zukunftsaufgabe}}}, year = {{2010}}, } @misc{11646, author = {{Rohler, Hans-Peter and Dettmar, Jörg}}, booktitle = {{Trägerschaft und Pflege des Emscher Landschaftsparks in der Metropole Ruhr - Wie viel Grün kann sich die Metropole Ruhr leisten?}}, editor = {{Dettmar, Jörg and Rohler, Hans-Peter}}, isbn = {{978-3-8375-0285-5}}, location = {{Essen}}, pages = {{66–69}}, publisher = {{Klartextverlag}}, title = {{{Das regionale Parkpflegewerk für den Emscher Landschaftspark - Ergebnisse des Forschungsprojektes Management Entwicklung und Vegetation}}}, year = {{2010}}, } @proceedings{11654, editor = {{Dettmar, Jörg and Rohler, Hans-Peter}}, isbn = {{978-3-8375-0285-5}}, location = {{Essen}}, pages = {{66–69}}, publisher = {{Klartextverlag}}, title = {{{Das regionale Parkpflegewerk für den Emscher Landschaftspark - Ergebnisse des Forschungsprojektes Management Entwicklung und Vegetation}}}, year = {{2010}}, } @misc{11722, author = {{Rohler, Hans-Peter}}, booktitle = {{G + L : Magazin für Landschaftsarchitektur und Stadtplanung }}, issn = {{0016-4720 }}, number = {{9}}, pages = {{6--8}}, publisher = {{Georg GmbH}}, title = {{{Eine Kulturhauptstadt macht noch keine Kulturlandschaft: Umbau der Autobahn A 42 zur Parkautobahn im Emscher Landschaftspark}}}, year = {{2010}}, } @inproceedings{5137, author = {{Pottgiesser, Uta and Hemmerling, Marco}}, booktitle = {{10th International Conference on Design & Decision Support Systems in Architecture and Urban Planning: July 19-22, 2010, Eindhoven, The Netherlands / Timmermans, Harry [edit.]}}, isbn = {{978-90-6814-181-8}}, location = {{Eindhoven, Niederlande}}, title = {{{Design decision matrix}}}, year = {{2010}}, } @article{5139, author = {{Pottgiesser, Uta and Knaack, Ulrich and Strauß, Holger}}, journal = {{Die Bautechnik}}, publisher = {{Ernst & Sohn Special}}, title = {{{Innovationen für Fassaden : Lehre und Forschung}}}, year = {{2010}}, } @inbook{5140, author = {{Pottgiesser, Uta and Kirch, Julia}}, booktitle = {{Old and new. Design manual for revitalizing existing buildings}}, editor = {{Jäger, Frank-Peter}}, isbn = {{9783034605250}}, pages = {{118--129}}, publisher = {{Birkhäuser-Verlag}}, title = {{{Renovating modern movement facades}}}, year = {{2010}}, } @inproceedings{5142, author = {{Pottgiesser, Uta and Hemmerling, Marco}}, location = {{Eindhoven, Niederlande}}, title = {{{Spatial perception in real and virtual environments methodology and case studies}}}, year = {{2010}}, } @inbook{5144, author = {{Pottgiesser, Uta and Kirch, Julia}}, booktitle = {{Alt-Neu : Entwurfshandbuch Bauen im Bestand }}, editor = {{Jäger, Frank-Peter}}, isbn = {{9783034605236}}, publisher = {{Birkhäuser-Verlag}}, title = {{{Temperierte Transparanz : Fassaden der Moderne, denkmalgerecht erneuert}}}, year = {{2010}}, } @inproceedings{5145, author = {{Pottgiesser, Uta and Kirch, Julia}}, location = {{Tokyo, Japan}}, title = {{{Typology of steel profiles in modern facade constructions : examples from Germany}}}, year = {{2010}}, } @misc{11644, author = {{Rohler, Hans-Peter}}, booktitle = {{G + L : Magazin für Landschaftsarchitektur und Stadtplanung}}, issn = {{0942-7538}}, number = {{01}}, pages = {{23–26}}, publisher = {{Georg GmbH}}, title = {{{Pflege auf regionaler Ebene : Strategien für den Emscher Landschaftspark}}}, volume = {{119}}, year = {{2009}}, } @book{5121, author = {{Pottgiesser, Uta and Aengeneyndt, Christine}}, pages = {{156}}, title = {{{CREED: Climate Related Energy Efficient Development: proceedings of the International Summer School}}}, year = {{2009}}, } @inproceedings{5122, author = {{Pottgiesser, Uta}}, isbn = {{ 978-3-939349-09-9 }}, pages = {{ 202 Seiten }}, publisher = {{ Hochschule OWL }}, title = {{{ Facade 2009 - facade technologies. conference volume : research focus ConstructionLab }}}, year = {{2009}}, } @inproceedings{5125, author = {{Pottgiesser, Uta}}, booktitle = {{Structural Studies, Repairs and Maintenance of Heritage Architecture XI}}, isbn = {{9781845641962}}, title = {{{Revitalisation strategies for modern glass facades of the 20thcentury}}}, doi = {{10.2495/str090501}}, year = {{2009}}, } @article{5147, author = {{Pottgiesser, Uta}}, journal = {{Die Bautechnik}}, title = {{{Energie-effiziente Sanierung moderner Glasfassaden des 20. Jahrhunderts}}}, year = {{2009}}, } @misc{11645, author = {{Rohler, Hans-Peter}}, booktitle = {{Stadt und Grün}}, issn = {{0948-9770}}, number = {{08}}, pages = {{46–50}}, publisher = {{Patzer Verlag}}, title = {{{Regional Abgestimmte Pflege - Regionales Parkpflegewerk Emscher Landschaftspark}}}, year = {{2008}}, } @book{5124, author = {{Pottgiesser, Uta}}, isbn = {{ 978-3-7705-4485-1 }}, keywords = {{Baukonstruktion}}, pages = {{ 226}}, publisher = {{Wilhelm Fink GmbH & Co. Verlags-KG}}, title = {{{ Prinzipien der Baukonstruktion }}}, year = {{2008}}, } @book{5127, author = {{Pottgiesser, Uta and Knaack, U.}}, title = {{{Fassade2008 : Innovationen: Tagungsband}}}, year = {{2008}}, } @inproceedings{5129, author = {{Pottgiesser, Uta}}, isbn = {{978-1-58603-917-2}}, title = {{{Glass curtain wall constructions : on the way to sustainability: comparing examples form Germany and Brazil}}}, doi = {{10.3233}}, year = {{2008}}, } @article{5157, author = {{Pottgiesser, Uta}}, journal = {{Die Bautechnik}}, publisher = {{Verlag Ernst & Sohn}}, title = {{{Schnittstelle Fassade : International und Integral}}}, year = {{2008}}, } @inproceedings{5158, author = {{Pottgiesser, Uta}}, isbn = {{ 978-3-939349-05-1 }}, pages = {{ 118 Seiten }}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Tagungsband Fassade 2008 Innovationen. Jahresbericht des Forschungsschwerpunktes "ConstructionLab" }}}, year = {{2008}}, } @inbook{5159, author = {{Pottgiesser, Uta}}, booktitle = {{Standards der Zukunft : Wohnbau neu gedacht / Burgard, Roland [edit.]}}, publisher = {{Springer Verlag}}, title = {{{Zukunftshäuser der Vergangenheit : Wohnkonzepte des 19. + 20. Jahrhunderts}}}, year = {{2008}}, } @article{6553, author = {{Beinlich, Burkhard and Lohr, Mathias}}, issn = {{1860-7640 }}, journal = {{Beiträge zur Naturkunde zwischen Egge und Weser }}, number = {{19}}, pages = {{41--59}}, publisher = {{NEW }}, title = {{{Zur Tierwelt des NSG „Grundlose-Taubenborn“ bei Höxter}}}, year = {{2007}}, } @phdthesis{6554, author = {{Lohr, Mathias}}, isbn = {{978-3-937455-14-3}}, issn = {{1431-1313}}, pages = {{183}}, publisher = {{Wolf & Kreuels}}, title = {{{Libellen in europäischen Flusslandschaften. Besiedlungsdynamik und Habitatnutzung von Libellengemeinschaften am Unteren Allier (Frankreich) und der Oberweser (Deutschland)}}}, volume = {{17}}, year = {{2007}}, } @book{5160, author = {{Pottgiesser, Uta}}, isbn = {{ 978-3-7705-4541-4 }}, keywords = {{Architekturzeichnung}}, pages = {{ 249}}, publisher = {{Wilhelm Fink GmbH & Co. Verlags-KG}}, title = {{{Architektur- und Plandarstellung }}}, year = {{2007}}, } @book{5162, author = {{Pottgiesser, Uta and Kesseler, Thomas and Breuer, Jörg and Wriedt, Verena}}, publisher = {{Wilhelm Fink GmbH & Co. Verlags-KG}}, title = {{{Architektur- und Plandarstellung}}}, year = {{2007}}, } @book{5163, author = {{Pottgiesser, Uta and König, Katharina}}, pages = {{256}}, publisher = {{Wilhelm Fink GmbH & Co. Verlags-KG}}, title = {{{Baukonstruktion : Ausbau}}}, year = {{2007}}, } @inbook{5164, author = {{Pottgiesser, Uta}}, booktitle = {{Entwurfs- und Konstruktionstafeln für Architekten / Holschemacher, K. [edit.]}}, publisher = {{Bauwerk}}, title = {{{Baukonstruktion : Innenausbau}}}, year = {{2007}}, } @inproceedings{5167, author = {{Pottgiesser, Uta}}, booktitle = {{ Fassade 2007 - internationale Fassaden. Jahresbericht des Forschungsschwerpunktes "Material und Gebäudehülle" }}, isbn = {{ 978-3-939349-04-4 }}, pages = {{113--120}}, publisher = {{ Hochschule OWL }}, title = {{{Einfach oder doppelt}}}, year = {{2007}}, } @proceedings{5168, editor = {{Pottgiesser, Uta and Knaack, Ulrich and Bilow, Marcel}}, title = {{{Fassade2007 : Internationale Fassaden: Tagungsband}}}, year = {{2007}}, } @proceedings{9655, editor = {{Pottgiesser, Uta}}, isbn = {{978-3-939349-04-4}}, pages = {{214}}, publisher = {{Hochschule OWL }}, title = {{{Fassade 2007 - internationale Fassaden : Jahresbericht des Forschungsschwerpunktes "Material und Gebäudehülle"}}}, year = {{2007}}, } @article{6555, author = {{Ferreira, S. and Grosso-Silva, J.M. and Lohr, Mathias and Weihrauch, F. and Jödicke, R.}}, issn = {{1388-7890 }}, journal = {{International Journal of Odonatology }}, number = {{2}}, pages = {{133--150}}, publisher = {{Backhuys }}, title = {{{A critical checklist of the Odonata of Portugal}}}, volume = {{9}}, year = {{2006}}, } @proceedings{5169, editor = {{Pottgiesser, Uta and Knaack, Ulrich and Strauß, Holger}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Fassade2006 : Sanierung und Erneuerung: Tagungsband}}}, year = {{2006}}, } @inbook{11635, author = {{Rohler, Hans-Peter and Fritz, Harald}}, booktitle = {{Masterplan Emscher Landschaftspark 2010}}, editor = {{Schwarze-Rodrian, Michael}}, isbn = {{978-3-89861-476-4}}, pages = {{226–249}}, publisher = {{Klartext-Verl. }}, title = {{{Entwicklungs- und Vegetationsmanagement}}}, year = {{2005}}, } @article{6560, author = {{Lohr, Mathias}}, issn = {{2747-7150}}, journal = {{Beiträge zur Naturkunde zwischen Egge und Weser}}, number = {{17}}, pages = {{75--80}}, title = {{{Das Naturschutzgebiet „Körbecker Bruch“ bei Körbecke}}}, year = {{2005}}, } @article{6561, author = {{Lohr, Mathias}}, issn = {{2747-7150 }}, journal = {{Beiträge zur Naturkunde zwischen Egge und Weser}}, number = {{17}}, pages = {{92--97}}, publisher = {{NEW}}, title = {{{Das Naturschutzgebiet „Auf dem Berenbruch“ bei Fürstenau}}}, year = {{2005}}, } @article{6562, abstract = {{Das zur Familie der Orchideen gehörende Dreizähnige Knabenkraut (Orchis tridentata Scop.) ist eine auffallende Pflanze unserer Kalk-Halbtrockenrasen. Ihretwegen besuchen alljährlich zahlreiche Orchideenfreunde unsere Region. Manche Autoren führen den deutschen, wie auch den lateinischen Namen der Pflanze auf die spitz zulaufenden, nach außen gebogenen Zipfel der drei äußeren Blütenkronblätter zurück (www.orchideen-kartierung.de, AHO NRW 2001), andere auf die dreilappige Lippe (Baumann 2005; vgl. Abb. 1). Der Gattungsname (griechisch: Hoden) leitet sich von den an die Form von Hoden erinnernden Wurzelknollen der Pflanze ab.}}, author = {{Lohr, Mathias and Grawe, Frank}}, issn = {{2747-7150 }}, journal = {{Beiträge zur Naturkunde zwischen Egge und Weser }}, number = {{17}}, pages = {{3--74}}, publisher = {{NEW}}, title = {{{Das Dreizähnige Knabenkraut (Orchis tridentata) im Kreis Höxter}}}, year = {{2005}}, } @proceedings{5170, editor = {{Pottgiesser, Uta and Knaack, Ulrich and Bilow, Marcel}}, publisher = {{Hochschule Ostwestfalen-Lippe}}, title = {{{Fassade2005 : Material, Konstruktion, Energie: Tagungsband}}}, year = {{2005}}, } @article{5171, author = {{Knaack, Ulrich and Pottgiesser, Uta and Bilow, Marcel}}, journal = {{DBZ : Deutsche Bauzeitschrift}}, title = {{{Technologietransfer in Richtung Architektur}}}, year = {{2005}}, } @misc{11638, author = {{Rohler, Hans-Peter}}, booktitle = {{Grünforum.LA}}, issn = {{1610-4730}}, number = {{5}}, pages = {{40--42}}, publisher = {{Thalacker }}, title = {{{Die Freiraum- und Landschaftsplanung kann sich auf neue Aufgaben nur mühsam einstellen Freiflächen: Von der Mangel- zur Massenware?}}}, year = {{2004}}, } @article{6585, author = {{Lohr, Mathias and Proess, R. and Schorr, M. and Zimmermann, M.}}, issn = {{0723-6514 }}, journal = {{Libellula}}, number = {{3/4}}, pages = {{173--178}}, publisher = {{Gesellschaft Deutschsprachiger Odonatologen }}, title = {{{Reproduktionsnachweise für Oxygastra curtisii am luxemburgisch-deutschen Grenzfluss Our (Odonata: Corduliidae)}}}, volume = {{23}}, year = {{2004}}, } @book{5172, author = {{Pottgiesser, Uta}}, isbn = {{ 3-89932-036-0 }}, keywords = {{Doppelte Fassade, Glasbau}}, pages = {{208}}, publisher = {{Bauwerk }}, title = {{{Fassadenschichtungen - Glas. mehrschalige Glaskonstruktionen ; Typologie, Energie, Konstruktionen, Projektbeispiele ; mit Auswahlkriterien und Entscheidungshilfen }}}, year = {{2004}}, } @article{5174, author = {{Pottgiesser, Uta and Weller, Bernhard}}, journal = {{Wissenschaftliche Zeitschrift der Technischen Universität Dresden}}, title = {{{Gebäudeintegrierte Photovoltaik auf der Basis von Dünnschichttechnologie}}}, year = {{2004}}, } @article{5175, author = {{Pottgiesser, Uta and Weller, Bernhard and Tasche, Silke}}, journal = {{Detail : Zeitschrift für Architektur, Baudetail, Einrichtung}}, title = {{{Kleben im Bauwesen : Glasbau: Teil 1}}}, year = {{2004}}, } @article{5176, author = {{Pottgiesser, Uta and Weller, Bernhard and Tasche, Silke}}, journal = {{Detail : Zeitschrift für Architektur, Baudetail, Einrichtung}}, title = {{{Kleben im Bauwesen : Glasbau: Teil 2}}}, year = {{2004}}, } @article{6590, author = {{Lohr, Mathias}}, issn = {{0297-0902}}, journal = {{Martinia}}, number = {{4}}, pages = {{123--148}}, title = {{{Étude faunistique des Odonates des plaines alluviales de l’Allier et de quelques affluents au nord-ouest de Moulins (Départements de l’Allier, du Cher et de la Nièvre)}}}, volume = {{19}}, year = {{2003}}, } @book{5177, author = {{Menzel, Karsten and Pottgiesser, Uta}}, title = {{{Projektbasierte, teamorientierte Lehr-Lern-Strategien zum e-Learning im Bauwesen}}}, year = {{2003}}, } @book{6591, author = {{Gerken, Bernd and Dörfer, Karsten and Lohr, Mathias and Schumacher, E.}}, isbn = {{978-3-7843-3720-3}}, pages = {{188, XVI}}, publisher = {{Bundesamt für Naturschutz}}, title = {{{Auenregeneration an der Oberweser. Ein Strom im Wandel: Bausteine zu einer lebendigen Aue}}}, volume = {{46}}, year = {{2002}}, } @article{5178, author = {{Weller, Bernhard and Pottgiesser, Uta and Wiesner, Silke}}, journal = {{Glas}}, title = {{{Glas-Report : Verkaufsstand als lastabtragend geklebte Ganzglaskonstruktion}}}, year = {{2002}}, } @phdthesis{5179, author = {{Pottgiesser, Uta}}, isbn = {{ 3-86005-317-5 }}, keywords = {{Doppelte Fassade, Glasbau, Energiebewusstes Bauen}}, pages = {{389}}, publisher = {{Techn. Univ., Lehrstuhl für Baukonstruktionslehre }}, title = {{{ Mehrschalige Glaskonstruktionen. energetische und konstruktive Aspekte }}}, year = {{2002}}, } @article{6775, author = {{Lohr, Mathias and Mitzka, Hanns-Dieter }}, issn = {{0930-293X }}, journal = {{Veröffentlichungen des Naturkundlichen Vereins Egge-Weser : Naturkundlicher Verein Egge-Weser }}, pages = {{31--50}}, publisher = {{Naturkundlicher Verein Egge-Weser }}, title = {{{Die Libellenfauna der Weserrandsenke "Taubenborn" bei Höxter ( Insecta: Odonata )}}}, volume = {{14}}, year = {{2001}}, } @misc{11642, author = {{Fritz, Harald and Rohler, Hans-Peter}}, booktitle = {{Landschaftsarchitekten}}, issn = {{0949-2305 }}, number = {{1}}, pages = {{4–5}}, publisher = {{Patzer }}, title = {{{Parkautobahn A42 - Eine Autobahn Kann Mehr Sein Als Ein Weggegrünter Landschaftsschaden}}}, year = {{2000}}, } @article{6778, author = {{Gerken, B. and Böttcher, H. and Leifeld, D. and Lohr, Mathias and Dörger, K. and Leushacke-Schneider, C.}}, journal = {{Angewandte Landschaftsökologie}}, pages = {{205--216}}, publisher = {{Bundesamt für Naturschutz }}, title = {{{Beurteilung von Regenerationsmaßnahmen durch vegetationskundliche und faunistische Untersuchungen – Beispiele aus der Oberweserniederung}}}, volume = {{37}}, year = {{2000}}, } @article{6779, author = {{Lohr, Mathias and Walter, A.}}, journal = {{Texte zur Wanderausstellung der Projektgruppe „Oberweserniederung“. – Auen-Regeneration, Projektinformationen}}, pages = {{15--32}}, title = {{{Neue Wege für die Flußlandschaft – Regeneration von Auenstandorten}}}, year = {{2000}}, } @book{5181, author = {{Weller, Bernhard and Pottgiesser, Uta}}, title = {{{Transparente Architektur : Konstruktiver Glasbau}}}, year = {{1999}}, }