--- _id: '11373' abstract: - lang: eng text: The topic of Product Lifecycle Management (PLM) should be nowadays part of any engineering degree course in every university worldwide. In an increasingly digital and connected world, students and prospective engineers need to know the interrelationships of holistic product development. Excellent expertise in a discipline such as mechanical engineering is still necessary, but no longer sufficient. This article explains why this is the case and what universities can do to address this issue. It describes in detail the PLM course of the OWL University of Applied Sciences and Arts located in Lemgo, Germany. In addition, suggestions are made on how to improve the course content, based on many years of experience. As such, this article is a valuable source of information for anyone teaching PLM today or intending to do so in the future. author: - first_name: Andreas full_name: Deuter, Andreas id: '62088' last_name: Deuter orcid: 0000-0002-6529-6215 - first_name: Andreas full_name: Otte, Andreas id: '51466' last_name: Otte citation: ama: 'Deuter A, Otte A. PLM in Engineering Education: Purpose and Challenges. In: Stark J, ed. Product Lifecycle Management (Volume 6) : Increasing the Value of PLM with Innovative New Technologies. Decision Engineering. Springer Nature Switzerland; 2024:215-231. doi:10.1007/978-3-031-53521-5_14' apa: 'Deuter, A., & Otte, A. (2024). PLM in Engineering Education: Purpose and Challenges. In J. Stark (Ed.), Product Lifecycle Management (Volume 6) : Increasing the Value of PLM with Innovative New Technologies (pp. 215–231). Springer Nature Switzerland. https://doi.org/10.1007/978-3-031-53521-5_14' bjps: 'Deuter A and Otte A (2024) PLM in Engineering Education: Purpose and Challenges. In Stark J (ed.), Product Lifecycle Management (Volume 6) : Increasing the Value of PLM with Innovative New Technologies. Cham: Springer Nature Switzerland, pp. 215–231.' chicago: 'Deuter, Andreas, and Andreas Otte. “PLM in Engineering Education: Purpose and Challenges.” In Product Lifecycle Management (Volume 6) : Increasing the Value of PLM with Innovative New Technologies, edited by John Stark, 215–31. Decision Engineering. Cham: Springer Nature Switzerland, 2024. https://doi.org/10.1007/978-3-031-53521-5_14.' chicago-de: 'Deuter, Andreas und Andreas Otte. 2024. PLM in Engineering Education: Purpose and Challenges. In: Product Lifecycle Management (Volume 6) : Increasing the Value of PLM with Innovative New Technologies, hg. von John Stark, 215–231. Decision Engineering. Cham: Springer Nature Switzerland. doi:10.1007/978-3-031-53521-5_14, .' din1505-2-1: 'Deuter, Andreas ; Otte, Andreas: PLM in Engineering Education: Purpose and Challenges. In: Stark, J. (Hrsg.): Product Lifecycle Management (Volume 6) : Increasing the Value of PLM with Innovative New Technologies, Decision Engineering. Cham : Springer Nature Switzerland, 2024, S. 215–231' havard: 'A. Deuter, A. Otte, PLM in Engineering Education: Purpose and Challenges, in: J. Stark (Ed.), Product Lifecycle Management (Volume 6) : Increasing the Value of PLM with Innovative New Technologies, Springer Nature Switzerland, Cham, 2024: pp. 215–231.' ieee: 'A. Deuter and A. Otte, “PLM in Engineering Education: Purpose and Challenges,” in Product Lifecycle Management (Volume 6) : Increasing the Value of PLM with Innovative New Technologies, J. Stark, Ed. Cham: Springer Nature Switzerland, 2024, pp. 215–231. doi: 10.1007/978-3-031-53521-5_14.' mla: 'Deuter, Andreas, and Andreas Otte. “PLM in Engineering Education: Purpose and Challenges.” Product Lifecycle Management (Volume 6) : Increasing the Value of PLM with Innovative New Technologies, edited by John Stark, Springer Nature Switzerland, 2024, pp. 215–31, https://doi.org/10.1007/978-3-031-53521-5_14.' short: 'A. Deuter, A. Otte, in: J. Stark (Ed.), Product Lifecycle Management (Volume 6) : Increasing the Value of PLM with Innovative New Technologies, Springer Nature Switzerland, Cham, 2024, pp. 215–231.' ufg: 'Deuter, Andreas/Otte, Andreas: PLM in Engineering Education: Purpose and Challenges, in: Stark, John (Hg.): Product Lifecycle Management (Volume 6) : Increasing the Value of PLM with Innovative New Technologies, Cham 2024 (Decision Engineering),  S. 215–231.' van: 'Deuter A, Otte A. PLM in Engineering Education: Purpose and Challenges. In: Stark J, editor. Product Lifecycle Management (Volume 6) : Increasing the Value of PLM with Innovative New Technologies. Cham: Springer Nature Switzerland; 2024. p. 215–31. (Decision Engineering).' date_created: 2024-04-25T12:09:54Z date_updated: 2024-04-25T13:04:09Z department: - _id: DEP7022 - _id: DEP1306 - _id: DEP7001 doi: 10.1007/978-3-031-53521-5_14 editor: - first_name: John full_name: Stark, John last_name: Stark language: - iso: eng page: 215-231 place: Cham popular_science: '1' publication: 'Product Lifecycle Management (Volume 6) : Increasing the Value of PLM with Innovative New Technologies' publication_identifier: eisbn: - 978-3-031-53521-5 eissn: - 2197-6589 isbn: - 978-3-031-53520-8 issn: - 1619-5736 publication_status: published publisher: Springer Nature Switzerland series_title: Decision Engineering status: public title: 'PLM in Engineering Education: Purpose and Challenges' type: book_chapter user_id: '83781' year: '2024' ... --- _id: '11666' abstract: - lang: ger text: "Den Knoten entwirren\r\nAlles hängt mit allem zusammen. Was sich anhört wie eine Binsenweisheit, ist in der Industrie tägliche Praxis geworden. Komplexität und „Verschränktheit“ der Prozesse in Entwicklung und Produktion wachsen vielen Unternehmen über den Kopf. Der Durchblick geht verloren, die Kosten laufen davon.\r\n\r\nDas muss nicht so sein. Wie man der grassierenden Komplexität mit Methode zu Leibe rückt, zeigt dieses elektronische Buch. Denn darum geht es in der Praxis: Trotz vermeintlich intelligenter Systeme im Unternehmen den Überblick behalten und die Komplexität beherrschen. \r\n\r\nMittel zum Zweck ist ein Assistenzsystem, das im Rahmen eines Forschungsprojektes entwickelt wurde und jetzt für den Einsatz bereitsteht. Damit das System nicht übergestülpt, sondern schrittweise erlernt und wirklich gelebt werden kann, wird ein flankierendes Konzept zur Befähigung präsentiert.\r\n\r\nDas Team um Herausgeber Andreas Deuter, seines Zeichens Professor an der Technischen Hochschule Ostwestfalen-Lippe (TH OWL), hat ein kompaktes und verständliches Buch verfasst. Ein echtes LOGiBit eben." alternative_title: - Strukturelle Produkt- und Prozesskomplexität beherrschen author: - first_name: Jan-Phillip full_name: Herrmann, Jan-Phillip id: '86180' last_name: Herrmann - first_name: Sebastian full_name: Imort, Sebastian id: '74291' last_name: Imort - first_name: Christoph full_name: Trojanowski, Christoph last_name: Trojanowski - first_name: Carolin full_name: Pankrath, Carolin last_name: Pankrath citation: ama: Herrmann JP, Imort S, Trojanowski C, Pankrath C. Den Überblick behalten . 1st ed. (Deuter A, ed.). LOG_X Verlag; 2024. apa: Herrmann, J.-P., Imort, S., Trojanowski, C., & Pankrath, C. (2024). Den Überblick behalten (A. Deuter, Ed.; 1st ed.). LOG_X Verlag. bjps: 'Herrmann J-P et al. (2024) Den Überblick behalten , 1st ed., Deuter A (ed.). Ludwigsburg: LOG_X Verlag.' chicago: 'Herrmann, Jan-Phillip, Sebastian Imort, Christoph Trojanowski, and Carolin Pankrath. Den Überblick behalten . Edited by Andreas Deuter. 1st ed. Ludwigsburg: LOG_X Verlag, 2024.' chicago-de: 'Herrmann, Jan-Phillip, Sebastian Imort, Christoph Trojanowski und Carolin Pankrath. 2024. Den Überblick behalten . Hg. von Andreas Deuter. 1. Aufl. Ludwigsburg: LOG_X Verlag.' din1505-2-1: 'Herrmann, Jan-Phillip ; Imort, Sebastian ; Trojanowski, Christoph ; Pankrath, Carolin ; Deuter, A. (Hrsg.): Den Überblick behalten . 1. Aufl. Ludwigsburg : LOG_X Verlag, 2024' havard: J.-P. Herrmann, S. Imort, C. Trojanowski, C. Pankrath, Den Überblick behalten , 1st ed., LOG_X Verlag, Ludwigsburg, 2024. ieee: 'J.-P. Herrmann, S. Imort, C. Trojanowski, and C. Pankrath, Den Überblick behalten , 1st ed. Ludwigsburg: LOG_X Verlag, 2024.' mla: Herrmann, Jan-Phillip, et al. Den Überblick behalten . Edited by Andreas Deuter, 1st ed., LOG_X Verlag, 2024. short: J.-P. Herrmann, S. Imort, C. Trojanowski, C. Pankrath, Den Überblick behalten , 1st ed., LOG_X Verlag, Ludwigsburg, 2024. ufg: 'Herrmann, Jan-Phillip u. a.: Den Überblick behalten , hg. von Deuter, Andreas, Ludwigsburg 12024.' van: 'Herrmann JP, Imort S, Trojanowski C, Pankrath C. Den Überblick behalten . 1st ed. Deuter A, editor. Ludwigsburg: LOG_X Verlag; 2024.' date_created: 2024-07-08T10:10:08Z date_updated: 2024-07-30T12:39:29Z ddc: - '006' department: - _id: DEP7022 - _id: DEP1306 - _id: DEP7001 edition: '1' editor: - first_name: Andreas full_name: Deuter, Andreas id: '62088' last_name: Deuter orcid: 0000-0002-6529-6215 file: - access_level: local content_type: application/pdf creator: adm-hemke date_created: 2024-07-18T14:35:21Z date_updated: 2024-07-18T14:35:21Z file_id: '11749' file_name: 9783910483132_ePDF.pdf file_size: 2788363 relation: main_file file_date_updated: 2024-07-18T14:35:21Z has_accepted_license: '1' language: - iso: ger place: Ludwigsburg publication_status: published publisher: LOG_X Verlag related_material: link: - relation: other url: https://www.log-x.de/index.php/verlagsprogramm/238-den-ueberblick-behalten status: public title: 'Den Überblick behalten ' type: book user_id: '83781' year: '2024' ... --- _id: '12992' abstract: - lang: eng text: In today's technology-driven world, the need for interdisciplinary skills is increasing. This has become challenging in tertiary education to provide students with applicable knowledge of various fields. Anderson's Adaptive Control of Thought (ACT) theory suggests that universities have traditionally focused on imparting declarative knowledge, which involves memorization of facts and concepts. However, imparting the ability to apply such knowledge on individual students and create procedural knowledge is the challenge. This includes teachers dealing with a diverse range of student abilities, particularly at university-level where they teach the same course content to students with different levels of prior knowledge and, given the structure of modern education systems, the resources required to monitor and provide feedback for a number of decisions and attempts independently performed by the students. Intelligent Tutoring Systems (ITS) have proven to be effective in addressing the aforementioned challenges by creating personalized learning environments that provide instant feedback, adapt to individual student needs, and promote the development of procedural knowledge. In the field of automation education at the university level, we are creating a 3D artificial intelligence (AI)-based ITS software named KIAAA (An AI Assistant for teaching in the field of automation), specifically designed to teach computer programming to students. KIAAA aims to assist students in transitioning from their abilities to procedural aptitude by providing personalized learning scenarios that allow them to apply their knowledge and receive immediate feedback. Our approach is based mainly on the pedagogical model of ITS, which focuses on creating a supportive and inclusive learning environment that promotes success for all students, regardless of their initial level of knowledge. One of the key aspects of our approach is the utilization of personalized learning. We propose a scheme that, subsequent to evaluate student's initial levels of procedural knowledge, creates 3D learning environments tailored to each individual student. By analyzing the solutions proposed by the students, we select the difficulty level of subsequent tasks. This approach takes into consideration student's discrete competence throughout the learning process, enabling them to progress on their prior knowledge. Additionally, the software provides customized feedback to each student on their performance, helping students identify areas that require improvement. Concepts for and implementations of ITS for a variety of fields, including introductory programming classes, have evolved for a long time. Our main contribution lies in presenting an end to end solution for ITS focused on teaching programming for automation students with realistically 3D simulated factory environments. While we strongly believe to have created a pedagogically sound, integrated intelligent teaching system for assisting programming classes in tertiary automation education, a robust user study for methodically evaluating our concept and implementation is still to be performed. Thus, we limit ourselves to presenting the underlying didactic concepts of KIAAA as a work in progress paper with a comprehensive evaluation to follow at a later date. author: - first_name: Asmar full_name: Ali, Asmar id: '78685' last_name: Ali - first_name: Andreas full_name: Deuter, Andreas id: '62088' last_name: Deuter orcid: 0000-0002-6529-6215 - first_name: Leon full_name: Wehmeier, Leon id: '81257' last_name: Wehmeier citation: ama: 'Ali A, Deuter A, Wehmeier L. Personalized Learning in Automation: A 3D AI-Based Approach. (IEEE ASEE Frontiers in Education Conference, Institute of Electrical and Electronics Engineers, American Society for Engineering Education, eds.). IEEE; 2024. doi:10.1109/fie58773.2023.10343228' apa: 'Ali, A., Deuter, A., & Wehmeier, L. (2024). Personalized Learning in Automation: A 3D AI-Based Approach. In IEEE ASEE Frontiers in Education Conference, Institute of Electrical and Electronics Engineers, & American Society for Engineering Education (Eds.), FIE 2023 : College Station, TX, USA, October 18-21, 2023 : conference proceedings  / 2023 IEEE Frontiers in Education Conference (FIE). IEEE. https://doi.org/10.1109/fie58773.2023.10343228' bjps: 'Ali A, Deuter A and Wehmeier L (2024) Personalized Learning in Automation: A 3D AI-Based Approach, IEEE ASEE Frontiers in Education Conference, Institute of Electrical and Electronics Engineers, and American Society for Engineering Education (eds). [Piscataway, NJ]: IEEE.' chicago: 'Ali, Asmar, Andreas Deuter, and Leon Wehmeier. Personalized Learning in Automation: A 3D AI-Based Approach. Edited by IEEE ASEE Frontiers in Education Conference, Institute of Electrical and Electronics Engineers, and American Society for Engineering Education. FIE 2023 : College Station, TX, USA, October 18-21, 2023 : Conference Proceedings  / 2023 IEEE Frontiers in Education Conference (FIE). [Piscataway, NJ]: IEEE, 2024. https://doi.org/10.1109/fie58773.2023.10343228.' chicago-de: 'Ali, Asmar, Andreas Deuter und Leon Wehmeier. 2024. Personalized Learning in Automation: A 3D AI-Based Approach. Hg. von IEEE ASEE Frontiers in Education Conference, Institute of Electrical and Electronics Engineers, und American Society for Engineering Education. FIE 2023 : College Station, TX, USA, October 18-21, 2023 : conference proceedings  / 2023 IEEE Frontiers in Education Conference (FIE). [Piscataway, NJ]: IEEE. doi:10.1109/fie58773.2023.10343228, .' din1505-2-1: 'Ali, Asmar ; Deuter, Andreas ; Wehmeier, Leon ; IEEE ASEE Frontiers in Education Conference ; Institute of Electrical and Electronics Engineers ; American Society for Engineering Education (Hrsg.): Personalized Learning in Automation: A 3D AI-Based Approach. [Piscataway, NJ] : IEEE, 2024' havard: 'A. Ali, A. Deuter, L. Wehmeier, Personalized Learning in Automation: A 3D AI-Based Approach, IEEE, [Piscataway, NJ], 2024.' ieee: 'A. Ali, A. Deuter, and L. Wehmeier, Personalized Learning in Automation: A 3D AI-Based Approach. [Piscataway, NJ]: IEEE, 2024. doi: 10.1109/fie58773.2023.10343228.' mla: 'Ali, Asmar, et al. “Personalized Learning in Automation: A 3D AI-Based Approach.” FIE 2023 : College Station, TX, USA, October 18-21, 2023 : Conference Proceedings  / 2023 IEEE Frontiers in Education Conference (FIE), edited by IEEE ASEE Frontiers in Education Conference et al., IEEE, 2024, https://doi.org/10.1109/fie58773.2023.10343228.' short: 'A. Ali, A. Deuter, L. Wehmeier, Personalized Learning in Automation: A 3D AI-Based Approach, IEEE, [Piscataway, NJ], 2024.' ufg: 'Ali, Asmar/Deuter, Andreas/Wehmeier, Leon: Personalized Learning in Automation: A 3D AI-Based Approach, hg. von IEEE ASEE Frontiers in Education Conference/Institute of Electrical and Electronics Engineers, American Society for Engineering Education, [Piscataway, NJ] 2024.' van: 'Ali A, Deuter A, Wehmeier L. Personalized Learning in Automation: A 3D AI-Based Approach. IEEE ASEE Frontiers in Education Conference, Institute of Electrical and Electronics Engineers, American Society for Engineering Education, editors. FIE 2023 : College Station, TX, USA, October 18-21, 2023 : conference proceedings  / 2023 IEEE Frontiers in Education Conference (FIE). [Piscataway, NJ]: IEEE; 2024.' conference: end_date: 2023-10-21 location: Texas name: 2023 IEEE Frontiers in Education Conference (FIE) start_date: 2023-10-18 corporate_editor: - IEEE ASEE Frontiers in Education Conference - Institute of Electrical and Electronics Engineers - American Society for Engineering Education date_created: 2025-06-18T12:57:37Z date_updated: 2025-06-18T13:01:55Z department: - _id: DEP7022 - _id: DEP1306 - _id: DEP7001 doi: 10.1109/fie58773.2023.10343228 language: - iso: eng place: '[Piscataway, NJ]' publication: 'FIE 2023 : College Station, TX, USA, October 18-21, 2023 : conference proceedings / 2023 IEEE Frontiers in Education Conference (FIE)' publication_identifier: eisbn: - 979-8-3503-3642-9 isbn: - 979-8-3503-3643-6 publication_status: published publisher: IEEE status: public title: 'Personalized Learning in Automation: A 3D AI-Based Approach' type: conference_editor_article user_id: '83781' year: '2024' ... --- _id: '12993' abstract: - lang: eng text: In computer science and related technical fields, researchers, educators, and practitioners are continuously automating recurring tasks for high efficiency in a wide variety of fields. In higher education, such tasks that educators face are the recurring review and assessment process of students' programming coursework. Thus, various attempts exist to automate the assessment and feedback generation for course homework and practicals in higher education. Those approaches for automated programming task assessment often comprise running automated tests to check for limited functional correctness and potentially style checking for various violations (LINTing). Educators familiar with large-scale automated task assessment are likely used to seeing hard-coded solutions specifically or accidentally designed to just pass the required tests, ignoring or misinterpreting the actual task requirements. Detecting such issues in arbitrary code is non-trivial and an ongoing research topic in software engineering. Software engineering research has yielded various semantic analysis frameworks, such as GitHub's CodeQL, which can be adapted for programming task assessment. We present a work-in-progress programming task analysis framework which employs CodeQL's analysis technology to identify the actual use of task-description-mandated syntactic and semantic elements such as loop structures or the use of mandated data blocks in branching conditions. This allows extending existing course work analysis frameworks to include a semantic check of an uploaded program which exceeds the relatively simple set of input-output test cases provided by unit tests. We use a running example of entry level programming tasks and several solution attempts to introduce and explain our proposed control flow and data flow -based analysis method. We discuss the benefits of including semantic analysis as an additional method in the automated programming task assessment toolbox. Our main contribution is the adaptation of an semantic analysis code framework to analyse syntactic and semantic components in students' programming coursework. author: - first_name: Leon full_name: Wehmeier, Leon id: '81257' last_name: Wehmeier - first_name: Sebastian full_name: Eilermann, Sebastian last_name: Eilermann - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Andreas full_name: Deuter, Andreas id: '62088' last_name: Deuter orcid: 0000-0002-6529-6215 citation: ama: Wehmeier L, Eilermann S, Niggemann O, Deuter A. Task-Fidelity Assessment for Programming Tasks Using Semantic Code Analysis. (IEEE ASEE Frontiers in Education Conference, Institute of Electrical and Electronics Engineers, American Society for Engineering Education, eds.). IEEE; 2024. doi:10.1109/fie58773.2023.10342916 apa: 'Wehmeier, L., Eilermann, S., Niggemann, O., & Deuter, A. (2024). Task-fidelity Assessment for Programming Tasks Using Semantic Code Analysis. In IEEE ASEE Frontiers in Education Conference, Institute of Electrical and Electronics Engineers, & American Society for Engineering Education (Eds.), FIE 2023 : College Station, TX, USA, October 18-21, 2023 : conference proceedings  / 2023 IEEE Frontiers in Education Conference (FIE). IEEE. https://doi.org/10.1109/fie58773.2023.10342916' bjps: 'Wehmeier L et al. (2024) Task-Fidelity Assessment for Programming Tasks Using Semantic Code Analysis, IEEE ASEE Frontiers in Education Conference, Institute of Electrical and Electronics Engineers, and American Society for Engineering Education (eds). [Piscataway, NJ]: IEEE.' chicago: 'Wehmeier, Leon, Sebastian Eilermann, Oliver Niggemann, and Andreas Deuter. Task-Fidelity Assessment for Programming Tasks Using Semantic Code Analysis. Edited by IEEE ASEE Frontiers in Education Conference, Institute of Electrical and Electronics Engineers, and American Society for Engineering Education. FIE 2023 : College Station, TX, USA, October 18-21, 2023 : Conference Proceedings  / 2023 IEEE Frontiers in Education Conference (FIE). [Piscataway, NJ]: IEEE, 2024. https://doi.org/10.1109/fie58773.2023.10342916.' chicago-de: 'Wehmeier, Leon, Sebastian Eilermann, Oliver Niggemann und Andreas Deuter. 2024. Task-fidelity Assessment for Programming Tasks Using Semantic Code Analysis. Hg. von IEEE ASEE Frontiers in Education Conference, Institute of Electrical and Electronics Engineers, und American Society for Engineering Education. FIE 2023 : College Station, TX, USA, October 18-21, 2023 : conference proceedings  / 2023 IEEE Frontiers in Education Conference (FIE). [Piscataway, NJ]: IEEE. doi:10.1109/fie58773.2023.10342916, .' din1505-2-1: 'Wehmeier, Leon ; Eilermann, Sebastian ; Niggemann, Oliver ; Deuter, Andreas ; IEEE ASEE Frontiers in Education Conference ; Institute of Electrical and Electronics Engineers ; American Society for Engineering Education (Hrsg.): Task-fidelity Assessment for Programming Tasks Using Semantic Code Analysis. [Piscataway, NJ] : IEEE, 2024' havard: L. Wehmeier, S. Eilermann, O. Niggemann, A. Deuter, Task-fidelity Assessment for Programming Tasks Using Semantic Code Analysis, IEEE, [Piscataway, NJ], 2024. ieee: 'L. Wehmeier, S. Eilermann, O. Niggemann, and A. Deuter, Task-fidelity Assessment for Programming Tasks Using Semantic Code Analysis. [Piscataway, NJ]: IEEE, 2024. doi: 10.1109/fie58773.2023.10342916.' mla: 'Wehmeier, Leon, et al. “Task-Fidelity Assessment for Programming Tasks Using Semantic Code Analysis.” FIE 2023 : College Station, TX, USA, October 18-21, 2023 : Conference Proceedings  / 2023 IEEE Frontiers in Education Conference (FIE), edited by IEEE ASEE Frontiers in Education Conference et al., IEEE, 2024, https://doi.org/10.1109/fie58773.2023.10342916.' short: L. Wehmeier, S. Eilermann, O. Niggemann, A. Deuter, Task-Fidelity Assessment for Programming Tasks Using Semantic Code Analysis, IEEE, [Piscataway, NJ], 2024. ufg: 'Wehmeier, Leon u. a.: Task-fidelity Assessment for Programming Tasks Using Semantic Code Analysis, hg. von IEEE ASEE Frontiers in Education Conference/Institute of Electrical and Electronics Engineers, American Society for Engineering Education, [Piscataway, NJ] 2024.' van: 'Wehmeier L, Eilermann S, Niggemann O, Deuter A. Task-fidelity Assessment for Programming Tasks Using Semantic Code Analysis. IEEE ASEE Frontiers in Education Conference, Institute of Electrical and Electronics Engineers, American Society for Engineering Education, editors. FIE 2023 : College Station, TX, USA, October 18-21, 2023 : conference proceedings  / 2023 IEEE Frontiers in Education Conference (FIE). [Piscataway, NJ]: IEEE; 2024.' conference: end_date: 2023-10-21 location: Texas name: 2023 IEEE Frontiers in Education Conference (FIE) start_date: 2023-10-18 corporate_editor: - IEEE ASEE Frontiers in Education Conference - Institute of Electrical and Electronics Engineers - American Society for Engineering Education date_created: 2025-06-18T13:05:11Z date_updated: 2025-06-18T13:23:56Z department: - _id: DEP7022 - _id: DEP1306 - _id: DEP7001 doi: 10.1109/fie58773.2023.10342916 keyword: - Codes - Electronic learning - Soft sensors - Semantics - Education - Syntactics - Task analysis language: - iso: eng place: '[Piscataway, NJ]' publication: 'FIE 2023 : College Station, TX, USA, October 18-21, 2023 : conference proceedings / 2023 IEEE Frontiers in Education Conference (FIE)' publication_identifier: eisbn: - 979-8-3503-3642-9 isbn: - 979-8-3503-3643-6 publication_status: published publisher: IEEE status: public title: Task-fidelity Assessment for Programming Tasks Using Semantic Code Analysis type: conference_editor_article user_id: '83781' year: '2024' ... --- _id: '10923' abstract: - lang: ger text: Aufgrund der kontinuierlich voranschreitenden Fertigungsautomation als Bestandteil der Digital Factory und des demografischen Wandels ist ein zunehmender Bedarf an Personal mit IT Expertise in vielen verschiedenen industriellen Bereichen erkennbar. In diesem Zusammenhang zeigen Künstliche Intelligenz (KI)-basierende Intelligent Tutoring Systeme (ITS) großes Potenzial den aufgezeigten Schulungsbedarf teilweise zu decken. Hierbei treffen besondere Anforderungen aus technischen, rechtlichen und organisatorischen Bereichen aufeinander, die für Unternehmen sowohl Chancen als auch Herausforderungen darstellen. Im Rahmen dieses Beitrags wird auf die Potentiale eines Digital Twin als Ergebnis der Fertigungsautomation und Bestandteil eines KI-basierenden ITS zur Unterstützung des Kompetenzerwerbs in der Aus- und Weiterbildung für die Fertigungsautomation eingegangen. Ziel ist es, die Chancen von individuell angepassten Aufgaben in einem ITS in Zusammenwirken mit einem Digital Twin für Unternehmen und Mitarbeiter sowie die dabei auftretenden Herausforderungen aufzuzeigen. Abschließend wird das Potenzial eines um einen Digital Twin erweitertes ITS anhand eines von uns entwickelten ITS in einer Fallstudie aufgezeigt. author: - first_name: Andreas full_name: Deuter, Andreas id: '62088' last_name: Deuter orcid: 0000-0002-6529-6215 - first_name: Leon full_name: Wehmeier, Leon id: '81257' last_name: Wehmeier - first_name: Asmar full_name: Ali, Asmar id: '78685' last_name: Ali - first_name: Roland full_name: Bach, Roland last_name: Bach - first_name: Christoph full_name: Schultz, Christoph last_name: Schultz - first_name: Sebastian full_name: Eilermann, Sebastian last_name: Eilermann - first_name: Oliver full_name: Niggemann, Oliver last_name: Niggemann citation: ama: Deuter A, Wehmeier L, Ali A, et al. Die steigende Bedeutung des Digital Twins als Bestandteil eines Intelligent Tutoring Systems in der Automatisierung. VDI Verlag; 2023:37-54. doi:10.51202/9783181024195-37 apa: Deuter, A., Wehmeier, L., Ali, A., Bach, R., Schultz, C., Eilermann, S., & Niggemann, O. (2023). Die steigende Bedeutung des Digital Twins als Bestandteil eines Intelligent Tutoring Systems in der Automatisierung. In VDI-Berichte Nr. 2419 (pp. 37–54). VDI Verlag. https://doi.org/10.51202/9783181024195-37 bjps: 'Deuter A et al. (2023) Die steigende Bedeutung des Digital Twins als Bestandteil eines Intelligent Tutoring Systems in der Automatisierung. Düsseldorf: VDI Verlag.' chicago: 'Deuter, Andreas, Leon Wehmeier, Asmar Ali, Roland Bach, Christoph Schultz, Sebastian Eilermann, and Oliver Niggemann. Die steigende Bedeutung des Digital Twins als Bestandteil eines Intelligent Tutoring Systems in der Automatisierung. VDI-Berichte Nr. 2419. Düsseldorf: VDI Verlag, 2023. https://doi.org/10.51202/9783181024195-37.' chicago-de: 'Deuter, Andreas, Leon Wehmeier, Asmar Ali, Roland Bach, Christoph Schultz, Sebastian Eilermann und Oliver Niggemann. 2023. Die steigende Bedeutung des Digital Twins als Bestandteil eines Intelligent Tutoring Systems in der Automatisierung. VDI-Berichte Nr. 2419. Düsseldorf: VDI Verlag. doi:10.51202/9783181024195-37, .' din1505-2-1: 'Deuter, Andreas ; Wehmeier, Leon ; Ali, Asmar ; Bach, Roland ; Schultz, Christoph ; Eilermann, Sebastian ; Niggemann, Oliver: Die steigende Bedeutung des Digital Twins als Bestandteil eines Intelligent Tutoring Systems in der Automatisierung. Düsseldorf : VDI Verlag, 2023' havard: A. Deuter, L. Wehmeier, A. Ali, R. Bach, C. Schultz, S. Eilermann, O. Niggemann, Die steigende Bedeutung des Digital Twins als Bestandteil eines Intelligent Tutoring Systems in der Automatisierung, VDI Verlag, Düsseldorf, 2023. ieee: 'A. Deuter et al., Die steigende Bedeutung des Digital Twins als Bestandteil eines Intelligent Tutoring Systems in der Automatisierung. Düsseldorf: VDI Verlag, 2023, pp. 37–54. doi: 10.51202/9783181024195-37.' mla: Deuter, Andreas, et al. “Die steigende Bedeutung des Digital Twins als Bestandteil eines Intelligent Tutoring Systems in der Automatisierung.” VDI-Berichte Nr. 2419, VDI Verlag, 2023, pp. 37–54, https://doi.org/10.51202/9783181024195-37. short: A. Deuter, L. Wehmeier, A. Ali, R. Bach, C. Schultz, S. Eilermann, O. Niggemann, Die steigende Bedeutung des Digital Twins als Bestandteil eines Intelligent Tutoring Systems in der Automatisierung, VDI Verlag, Düsseldorf, 2023. ufg: 'Deuter, Andreas u. a.: Die steigende Bedeutung des Digital Twins als Bestandteil eines Intelligent Tutoring Systems in der Automatisierung, Düsseldorf 2023.' van: 'Deuter A, Wehmeier L, Ali A, Bach R, Schultz C, Eilermann S, et al. Die steigende Bedeutung des Digital Twins als Bestandteil eines Intelligent Tutoring Systems in der Automatisierung. VDI-Berichte Nr. 2419. Düsseldorf: VDI Verlag; 2023.' conference: location: Baden-Baden name: Automation 2023 date_created: 2024-01-09T11:00:59Z date_updated: 2024-01-24T10:03:46Z department: - _id: DEP7022 - _id: DEP1306 - _id: DEP7001 doi: 10.51202/9783181024195-37 language: - iso: ger main_file_link: - open_access: '1' oa: '1' page: 37-54 place: Düsseldorf publication: VDI-Berichte Nr. 2419 publication_identifier: eissn: - '978-3-18-102419-5 ' isbn: - '978-3-18-092419-9 ' publication_status: published publisher: VDI Verlag quality_controlled: '1' status: public title: Die steigende Bedeutung des Digital Twins als Bestandteil eines Intelligent Tutoring Systems in der Automatisierung type: conference_editor_article user_id: '83780' year: '2023' ... --- _id: '10935' abstract: - lang: eng text: One of the challenges in universities is to take into account the different competences of students throughout the process of imparting knowledge. It is unlikely that all students will grasp the course content in the same way, as they have different abilities. Similarly, it is unrealistic for teachers to address all the individual needs of each student at all times. In addition, maintaining learners' attention to a particular topic is also an essential part of teaching. To overcome these challenges, we are developing AI learning software as part of a research project. The software generates learning scenarios for the students and takes their individual competences into account. The research project focuses on the field of automation technology, especially on programming, as programming skills are usually required in automation environments. When solving the scenarios, students receive immediate feedback on how well they have solved the task. Immediate automated feedback not only meets the students' expectations of quick learning feedback, but it also relieves the teaching staff in the assessment process. In addition, the software includes an interactive user interface that allows learners to see the results of their programming tasks in a simulated 3D environment. This approach aims to maintain learners' attention over a longer learning period. This paper describes the above aspects that are being developed in the research project and previews the new learning opportunities that could arise from the use of AI. author: - first_name: Asmar full_name: Ali, Asmar id: '78685' last_name: Ali - first_name: Andreas full_name: Deuter, Andreas id: '62088' last_name: Deuter orcid: 0000-0002-6529-6215 citation: ama: 'Ali A, Deuter A. An AI Assistant for Education in Automation. Journal of international scientific publications / Science & Education Foundation : Educational Alternatives . 2023;21:12-20. doi:10.62991/EA1996108906' apa: 'Ali, A., & Deuter, A. (2023). An AI Assistant for Education in Automation. Journal of International Scientific Publications / Science & Education Foundation : Educational Alternatives , 21, 12–20. https://doi.org/10.62991/EA1996108906' bjps: 'Ali A and Deuter A (2023) An AI Assistant for Education in Automation. Journal of international scientific publications / Science & Education Foundation : Educational Alternatives 21, 12–20.' chicago: 'Ali, Asmar, and Andreas Deuter. “An AI Assistant for Education in Automation.” Journal of International Scientific Publications / Science & Education Foundation : Educational Alternatives 21 (2023): 12–20. https://doi.org/10.62991/EA1996108906.' chicago-de: 'Ali, Asmar und Andreas Deuter. 2023. An AI Assistant for Education in Automation. Journal of international scientific publications / Science & Education Foundation : Educational Alternatives 21: 12–20. doi:10.62991/EA1996108906, .' din1505-2-1: 'Ali, Asmar ; Deuter, Andreas: An AI Assistant for Education in Automation. In: Journal of international scientific publications / Science & Education Foundation : Educational Alternatives Bd. 21. [Erscheinungsort nicht ermittelbar], Info Invest (2023), S. 12–20' havard: 'A. Ali, A. Deuter, An AI Assistant for Education in Automation, Journal of International Scientific Publications / Science & Education Foundation : Educational Alternatives . 21 (2023) 12–20.' ieee: 'A. Ali and A. Deuter, “An AI Assistant for Education in Automation,” Journal of international scientific publications / Science & Education Foundation : Educational Alternatives , vol. 21, pp. 12–20, 2023, doi: 10.62991/EA1996108906.' mla: 'Ali, Asmar, and Andreas Deuter. “An AI Assistant for Education in Automation.” Journal of International Scientific Publications / Science & Education Foundation : Educational Alternatives , vol. 21, 2023, pp. 12–20, https://doi.org/10.62991/EA1996108906.' short: 'A. Ali, A. Deuter, Journal of International Scientific Publications / Science & Education Foundation : Educational Alternatives 21 (2023) 12–20.' ufg: 'Ali, Asmar/Deuter, Andreas: An AI Assistant for Education in Automation, in: Journal of international scientific publications / Science & Education Foundation : Educational Alternatives 21 (2023),  S. 12–20.' van: 'Ali A, Deuter A. An AI Assistant for Education in Automation. Journal of international scientific publications / Science & Education Foundation : Educational Alternatives . 2023;21:12–20.' conference: end_date: 2023-08-26 location: Burgas name: 14th International Conference Education, Research & Development start_date: 2023-08-24 date_created: 2024-01-09T13:25:08Z date_updated: 2025-06-12T14:01:23Z department: - _id: DEP7022 - _id: DEP1306 - _id: DEP7001 doi: 10.62991/EA1996108906 intvolume: ' 21' keyword: - ai education - automated feedback - automation education - educational software - programming language: - iso: eng main_file_link: - open_access: '1' url: https://www.scientific-publications.net/en/article/1002566/ oa: '1' page: 12-20 place: '[Erscheinungsort nicht ermittelbar]' publication: 'Journal of international scientific publications / Science & Education Foundation : Educational Alternatives ' publication_identifier: issn: - 1313-2571 publication_status: published publisher: 'Info Invest ' status: public title: An AI Assistant for Education in Automation type: industry_journal_article user_id: '83781' volume: 21 year: '2023' ... --- _id: '10962' abstract: - lang: eng text: The increasing number of product artifacts (e.g., mechanical or electronic components, software functions, documents) confronts small and medium-sized companies with the challenge of assessing change effects. The lack of knowledge of artifact relationships causes problems, such as outdated documentation, lack of coordination with affected disciplines, or delayed changes. The Design Structure Matrix (DSM) can clearly represent the elements and relationships of complex systems. This paper presents an assistance system for intuitive visualization of engineering change effects using existing DSM-based methods for complexity management. The implemented algorithms compute graph layouts, cluster analyses, and change predictions in the form of change risk, time, and cost. An application example of a 3D-printed intelligent lamp demonstrates the approach's viability. The paper concludes with a discussion of the benefits and future activities. author: - first_name: Jan-Phillip full_name: Herrmann, Jan-Phillip id: '75846' last_name: Herrmann - first_name: Sven full_name: Tackenberg, Sven id: '71470' last_name: Tackenberg - first_name: Christoph full_name: Trojanowski, Christoph last_name: Trojanowski - first_name: Carolin full_name: Pankrath, Carolin last_name: Pankrath - first_name: Sebastian full_name: Imort, Sebastian id: '74291' last_name: Imort - first_name: Andreas full_name: Deuter, Andreas id: '62088' last_name: Deuter orcid: 0000-0002-6529-6215 citation: ama: Herrmann JP, Tackenberg S, Trojanowski C, Pankrath C, Imort S, Deuter A. Assistance System for Graph-Based 3D Visualization of Design Structure Matrices. (Stowe H, Browning TR, Eppinger SD, et al., eds.). The Design Society; 2023:58-67. doi:10.35199/dsm2023.07 apa: 'Herrmann, J.-P., Tackenberg, S., Trojanowski, C., Pankrath, C., Imort, S., & Deuter, A. (2023). Assistance System for graph-based 3D Visualization of Design Structure Matrices. In H. Stowe, T. R. Browning, S. D. Eppinger, J. Trauer, C. Langner, M. Kreimeyer, O. Isaksson, M. Panarotto, & A. Brahma (Eds.), DS 126: Proceedings of the 25th International DSM Conference (DSM 2023) (pp. 58–67). The Design Society. https://doi.org/10.35199/dsm2023.07' bjps: Herrmann J-P et al. (2023) Assistance System for Graph-Based 3D Visualization of Design Structure Matrices, Stowe H et al. (eds). The Design Society. chicago: 'Herrmann, Jan-Phillip, Sven Tackenberg, Christoph Trojanowski, Carolin Pankrath, Sebastian Imort, and Andreas Deuter. Assistance System for Graph-Based 3D Visualization of Design Structure Matrices. Edited by Harold Stowe, Tyson R. Browning, Steven D. Eppinger, Jakob Trauer, Christopher Langner, Matthias Kreimeyer, Ola Isaksson, Massimo Panarotto, and Arindam Brahma. DS 126: Proceedings of the 25th International DSM Conference (DSM 2023). The Design Society, 2023. https://doi.org/10.35199/dsm2023.07.' chicago-de: 'Herrmann, Jan-Phillip, Sven Tackenberg, Christoph Trojanowski, Carolin Pankrath, Sebastian Imort und Andreas Deuter. 2023. Assistance System for graph-based 3D Visualization of Design Structure Matrices. Hg. von Harold Stowe, Tyson R. Browning, Steven D. Eppinger, Jakob Trauer, Christopher Langner, Matthias Kreimeyer, Ola Isaksson, Massimo Panarotto, und Arindam Brahma. DS 126: Proceedings of the 25th International DSM Conference (DSM 2023). The Design Society. doi:10.35199/dsm2023.07, .' din1505-2-1: 'Herrmann, Jan-Phillip ; Tackenberg, Sven ; Trojanowski, Christoph ; Pankrath, Carolin ; Imort, Sebastian ; Deuter, Andreas ; Stowe, H. ; Browning, T. R. ; Eppinger, S. D. ; Trauer, J. ; Langner, C. ; Kreimeyer, M. ; Isaksson, O. ; Panarotto, M. ; u. a. (Hrsg.): Assistance System for graph-based 3D Visualization of Design Structure Matrices : The Design Society, 2023' havard: J.-P. Herrmann, S. Tackenberg, C. Trojanowski, C. Pankrath, S. Imort, A. Deuter, Assistance System for graph-based 3D Visualization of Design Structure Matrices, The Design Society, 2023. ieee: 'J.-P. Herrmann, S. Tackenberg, C. Trojanowski, C. Pankrath, S. Imort, and A. Deuter, Assistance System for graph-based 3D Visualization of Design Structure Matrices. The Design Society, 2023, pp. 58–67. doi: 10.35199/dsm2023.07.' mla: 'Herrmann, Jan-Phillip, et al. “Assistance System for Graph-Based 3D Visualization of Design Structure Matrices.” DS 126: Proceedings of the 25th International DSM Conference (DSM 2023), edited by Harold Stowe et al., The Design Society, 2023, pp. 58–67, https://doi.org/10.35199/dsm2023.07.' short: J.-P. Herrmann, S. Tackenberg, C. Trojanowski, C. Pankrath, S. Imort, A. Deuter, Assistance System for Graph-Based 3D Visualization of Design Structure Matrices, The Design Society, 2023. ufg: 'Herrmann, Jan-Phillip u. a.: Assistance System for graph-based 3D Visualization of Design Structure Matrices, hg. von Stowe, Harold u. a., o. O. 2023.' van: 'Herrmann JP, Tackenberg S, Trojanowski C, Pankrath C, Imort S, Deuter A. Assistance System for graph-based 3D Visualization of Design Structure Matrices. Stowe H, Browning TR, Eppinger SD, Trauer J, Langner C, Kreimeyer M, et al., editors. DS 126: Proceedings of the 25th International DSM Conference (DSM 2023). The Design Society; 2023.' conference: end_date: 2023-10-05 location: Gothenburg, Sweden name: 25th International Dependency and Structure Modeling Conference (DSM) start_date: 2023-10-03 date_created: 2024-01-24T10:17:16Z date_updated: 2025-06-26T07:55:50Z department: - _id: DEP7022 - _id: DEP1306 - _id: DEP7001 doi: 10.35199/dsm2023.07 editor: - first_name: Harold full_name: Stowe, Harold last_name: Stowe - first_name: Tyson R. full_name: Browning, Tyson R. last_name: Browning - first_name: Steven D. full_name: Eppinger, Steven D. last_name: Eppinger - first_name: Jakob full_name: Trauer, Jakob last_name: Trauer - first_name: Christopher full_name: Langner, Christopher last_name: Langner - first_name: Matthias full_name: Kreimeyer, Matthias last_name: Kreimeyer - first_name: Ola full_name: Isaksson, Ola last_name: Isaksson - first_name: Massimo full_name: Panarotto, Massimo last_name: Panarotto - first_name: Arindam full_name: Brahma, Arindam last_name: Brahma keyword: - Graph-based Visualization - Assistance System - Engineering Change Management - Complexity Management language: - iso: eng main_file_link: - open_access: '1' url: https://www.designsociety.org/download-publication/46879/Assistance+System+for+graph-based+3D+Visualization+of+Design+Structure+Matrices oa: '1' page: 58-67 publication: 'DS 126: Proceedings of the 25th International DSM Conference (DSM 2023)' publication_status: published publisher: The Design Society status: public title: Assistance System for graph-based 3D Visualization of Design Structure Matrices type: conference_editor_article user_id: '83781' year: '2023' ... --- _id: '13010' abstract: - lang: eng text: Especially in highly interdisciplinary fields such as automation engineering, contemporary programming education with tailored assignments and individual feedback is a major challenge for educational institutions due to the increasing number of students per teacher and the ever-increasing demand for computer science professionals. To address this gap, we present ”KIAAA” an AI Assistant for Automation Engineering Teaching, a work-in-progress approach for an integrated, customized, and AI-based learning support system for automation and programming courses based on instructor-defined course objectives. Thereby in the KIAAA system, the individual knowledge level of the students is determined and individually tailored virtual learning scenarios are generated based on the knowledge and learning profile of the students. These are iteratively adapted based on the answers given. To achieve this, KIAAA uses several AI components, a hybrid rule-based scenario generation component, a Help-DKT-based cognitive model, and a solution assessor that uses a combination of traditional code analysis methods and AI-based analyses methods for automated programming task assessment. These components are the main parts of KIAAA to generate customized programming scenarios as well as visualization and simulation based on a modern game and physics engine. author: - first_name: Sebastian full_name: Eilermann, Sebastian last_name: Eilermann - first_name: Leon full_name: Wehmeier, Leon id: '81257' last_name: Wehmeier - first_name: Oliver full_name: Niggemann, Oliver last_name: Niggemann - first_name: Andreas full_name: Deuter, Andreas id: '62088' last_name: Deuter orcid: 0000-0002-6529-6215 citation: ama: 'Eilermann S, Wehmeier L, Niggemann O, Deuter A. KIAAA: An AI Assistant for Teaching Programming in the Field of Automation. (Jasperneite J, IEEE International Conference on Industrial Informatics , Institute of Electrical and Electronics Engineers, eds.). IEEE; 2023. doi:10.1109/indin51400.2023.10218157' apa: 'Eilermann, S., Wehmeier, L., Niggemann, O., & Deuter, A. (2023). KIAAA: An AI Assistant for Teaching Programming in the Field of Automation. In J. Jasperneite, IEEE International Conference on Industrial Informatics , & Institute of Electrical and Electronics Engineers (Eds.), 2023 IEEE 21st International Conference on Industrial Informatics (INDIN). IEEE. https://doi.org/10.1109/indin51400.2023.10218157' bjps: 'Eilermann S et al. (2023) KIAAA: An AI Assistant for Teaching Programming in the Field of Automation, Jasperneite J, IEEE International Conference on Industrial Informatics , and Institute of Electrical and Electronics Engineers (eds). [Piscataway, NJ]: IEEE.' chicago: 'Eilermann, Sebastian, Leon Wehmeier, Oliver Niggemann, and Andreas Deuter. KIAAA: An AI Assistant for Teaching Programming in the Field of Automation. Edited by Jürgen Jasperneite, IEEE International Conference on Industrial Informatics , and Institute of Electrical and Electronics Engineers. 2023 IEEE 21st International Conference on Industrial Informatics (INDIN). [Piscataway, NJ]: IEEE, 2023. https://doi.org/10.1109/indin51400.2023.10218157.' chicago-de: 'Eilermann, Sebastian, Leon Wehmeier, Oliver Niggemann und Andreas Deuter. 2023. KIAAA: An AI Assistant for Teaching Programming in the Field of Automation. Hg. von Jürgen Jasperneite, IEEE International Conference on Industrial Informatics , und Institute of Electrical and Electronics Engineers. 2023 IEEE 21st International Conference on Industrial Informatics (INDIN). [Piscataway, NJ]: IEEE. doi:10.1109/indin51400.2023.10218157, .' din1505-2-1: 'Eilermann, Sebastian ; Wehmeier, Leon ; Niggemann, Oliver ; Deuter, Andreas ; Jasperneite, J. ; IEEE International Conference on Industrial Informatics ; Institute of Electrical and Electronics Engineers (Hrsg.): KIAAA: An AI Assistant for Teaching Programming in the Field of Automation. [Piscataway, NJ] : IEEE, 2023' havard: 'S. Eilermann, L. Wehmeier, O. Niggemann, A. Deuter, KIAAA: An AI Assistant for Teaching Programming in the Field of Automation, IEEE, [Piscataway, NJ], 2023.' ieee: 'S. Eilermann, L. Wehmeier, O. Niggemann, and A. Deuter, KIAAA: An AI Assistant for Teaching Programming in the Field of Automation. [Piscataway, NJ]: IEEE, 2023. doi: 10.1109/indin51400.2023.10218157.' mla: 'Eilermann, Sebastian, et al. “KIAAA: An AI Assistant for Teaching Programming in the Field of Automation.” 2023 IEEE 21st International Conference on Industrial Informatics (INDIN), edited by Jürgen Jasperneite et al., IEEE, 2023, https://doi.org/10.1109/indin51400.2023.10218157.' short: 'S. Eilermann, L. Wehmeier, O. Niggemann, A. Deuter, KIAAA: An AI Assistant for Teaching Programming in the Field of Automation, IEEE, [Piscataway, NJ], 2023.' ufg: 'Eilermann, Sebastian u. a.: KIAAA: An AI Assistant for Teaching Programming in the Field of Automation, hg. von Jasperneite, Jürgen/IEEE International Conference on Industrial Informatics , Institute of Electrical and Electronics Engineers, [Piscataway, NJ] 2023.' van: 'Eilermann S, Wehmeier L, Niggemann O, Deuter A. KIAAA: An AI Assistant for Teaching Programming in the Field of Automation. Jasperneite J, IEEE International Conference on Industrial Informatics , Institute of Electrical and Electronics Engineers, editors. 2023 IEEE 21st International Conference on Industrial Informatics (INDIN). [Piscataway, NJ]: IEEE; 2023.' conference: end_date: 2023-07-20 location: Lemgo name: 21st International Conference on Industrial Informatics (INDIN) start_date: 2023-07-18 corporate_editor: - 'IEEE International Conference on Industrial Informatics ' - Institute of Electrical and Electronics Engineers date_created: 2025-06-24T09:24:47Z date_updated: 2025-06-24T09:38:24Z department: - _id: DEP7022 - _id: DEP1306 - _id: DEP7001 doi: 10.1109/indin51400.2023.10218157 editor: - first_name: Jürgen full_name: Jasperneite, Jürgen id: '1899' last_name: Jasperneite keyword: - Visualization - Automation - Education - Games - Hybrid power systems - Task analysis - Artificial intelligence language: - iso: eng place: '[Piscataway, NJ]' publication: 2023 IEEE 21st International Conference on Industrial Informatics (INDIN) publication_identifier: eisbn: - 978-1-6654-9313-0 isbn: - 978-1-6654-9314-7 publication_status: published publisher: IEEE quality_controlled: '1' status: public title: 'KIAAA: An AI Assistant for Teaching Programming in the Field of Automation' type: conference_editor_article user_id: '83781' year: '2023' ... --- _id: '9133' abstract: - lang: eng text: 'Mit der steigenden Komplexität der Entwicklung mechatronischer Produkte sind den beteiligten Akteuren die Wirkbeziehungen zwischen den Bauteilen sowie zwischen den Bauteilen und den erforderlichen Produktionsprozessen oft nicht mehr hinreichend bekannt. Nicht abgestimmte Entscheidungen und Handlungen sind die Folge, die zu Kosten- und Terminüberschreitungen führen. Dieser Beitrag zeigt mögliche Innovationspotenziale auf, die ein Assistenzsystem für das Komplexitätsmanagement bieten kann. ' article_type: original author: - first_name: Andreas full_name: Deuter, Andreas id: '62088' last_name: Deuter orcid: 0000-0002-6529-6215 - first_name: Sven full_name: Tackenberg, Sven id: '71470' last_name: Tackenberg - first_name: Jan-Phillip full_name: Herrmann, Jan-Phillip id: '75846' last_name: Herrmann - first_name: Marc full_name: Vathauer, Marc last_name: Vathauer - first_name: Franz full_name: Kage, Franz last_name: Kage citation: ama: Deuter A, Tackenberg S, Herrmann JP, Vathauer M, Kage F. Innovationspotenziale im Komplexitätsmanagement- Assistenzsystem für kleine und mittlere Unternehmen. WT WerkstattsTechnik online. 2022;112(6):404-407. apa: Deuter, A., Tackenberg, S., Herrmann, J.-P., Vathauer, M., & Kage, F. (2022). Innovationspotenziale im Komplexitätsmanagement- Assistenzsystem für kleine und mittlere Unternehmen. WT WerkstattsTechnik Online, 112(6), 404–407. bjps: Deuter A et al. (2022) Innovationspotenziale Im Komplexitätsmanagement- Assistenzsystem Für Kleine Und Mittlere Unternehmen. WT WerkstattsTechnik online 112, 404–407. chicago: 'Deuter, Andreas, Sven Tackenberg, Jan-Phillip Herrmann, Marc Vathauer, and Franz Kage. “Innovationspotenziale Im Komplexitätsmanagement- Assistenzsystem Für Kleine Und Mittlere Unternehmen.” WT WerkstattsTechnik Online 112, no. 6 (2022): 404–7.' chicago-de: 'Deuter, Andreas, Sven Tackenberg, Jan-Phillip Herrmann, Marc Vathauer und Franz Kage. 2022. Innovationspotenziale im Komplexitätsmanagement- Assistenzsystem für kleine und mittlere Unternehmen. WT WerkstattsTechnik online 112, Nr. 6: 404–407.' din1505-2-1: 'Deuter, Andreas ; Tackenberg, Sven ; Herrmann, Jan-Phillip ; Vathauer, Marc ; Kage, Franz: Innovationspotenziale im Komplexitätsmanagement- Assistenzsystem für kleine und mittlere Unternehmen. In: WT WerkstattsTechnik online Bd. 112. Düsseldorf, VDI Fachmedien (2022), Nr. 6, S. 404–407' havard: A. Deuter, S. Tackenberg, J.-P. Herrmann, M. Vathauer, F. Kage, Innovationspotenziale im Komplexitätsmanagement- Assistenzsystem für kleine und mittlere Unternehmen, WT WerkstattsTechnik Online. 112 (2022) 404–407. ieee: A. Deuter, S. Tackenberg, J.-P. Herrmann, M. Vathauer, and F. Kage, “Innovationspotenziale im Komplexitätsmanagement- Assistenzsystem für kleine und mittlere Unternehmen,” WT WerkstattsTechnik online, vol. 112, no. 6, pp. 404–407, 2022. mla: Deuter, Andreas, et al. “Innovationspotenziale Im Komplexitätsmanagement- Assistenzsystem Für Kleine Und Mittlere Unternehmen.” WT WerkstattsTechnik Online, vol. 112, no. 6, 2022, pp. 404–07. short: A. Deuter, S. Tackenberg, J.-P. Herrmann, M. Vathauer, F. Kage, WT WerkstattsTechnik Online 112 (2022) 404–407. ufg: 'Deuter, Andreas u. a.: Innovationspotenziale im Komplexitätsmanagement- Assistenzsystem für kleine und mittlere Unternehmen, in: WT WerkstattsTechnik online 112 (2022), H. 6,  S. 404–407.' van: Deuter A, Tackenberg S, Herrmann JP, Vathauer M, Kage F. Innovationspotenziale im Komplexitätsmanagement- Assistenzsystem für kleine und mittlere Unternehmen. WT WerkstattsTechnik online. 2022;112(6):404–7. date_created: 2022-10-20T11:04:27Z date_updated: 2024-08-05T06:51:35Z department: - _id: DEP7022 - _id: DEP7020 - _id: DEP1306 intvolume: ' 112' issue: '6' language: - iso: eng main_file_link: - open_access: '1' url: https://www.ingenieur.de/fachmedien/wt-werkstattstechnik/bmbf-produktionsforschung-wt-werkstattstechnik/innovationspotenziale-im-komplexitaetsmanagement/ oa: '1' page: 404-407 place: Düsseldorf publication: WT WerkstattsTechnik online publication_identifier: eissn: - '1436-4980 ' issn: - 1436-5006 publication_status: published publisher: VDI Fachmedien status: public title: Innovationspotenziale im Komplexitätsmanagement- Assistenzsystem für kleine und mittlere Unternehmen type: industry_journal_article user_id: '83781' volume: 112 year: '2022' ... --- _id: '7035' abstract: - lang: eng text: Technological progress, upcoming cyber-physical systems, and limited resources confront small and medium-sized enterprises (SMEs) with the challenge of complexity management in product development projects spanning over the entire product lifecycle. SMEs require a solution for documenting and analyzing the functional relationships between multiple domains such as products, software, and processes. The German research project FuPEP “Funktionsorientiertes Komplexitätsmanagement in allen Phasen der Produktentstehung” aims to address this issue by developing an assistance system that supports product developers by visualizing functional relationships. This paper presents the methodology and results of the assistance system’s requirements elicitation with two SMEs. Conducting the elicitation during a global pandemic, we discuss its application using specific techniques in light of COVID-19. We model problems and their effects regarding complexity management in product development in a system dynamics model. The most important requirements and use cases elicited are presented, and the requirements elicitation methodology and results are discussed. Additionally, we present a multilayer software architecture design of the assistance system. Our case study suggests a relationship between fear of a missing project focus among project participants and the restriction of requirements elicitation techniques to those possible via web conferencing tools. article_number: '149' author: - first_name: Jan-Phillip full_name: Herrmann, Jan-Phillip id: '75846' last_name: Herrmann - first_name: Sebastian full_name: Imort, Sebastian id: '74291' last_name: Imort - first_name: Christoph full_name: Trojanowski, Christoph last_name: Trojanowski - first_name: Andreas full_name: Deuter, Andreas id: '62088' last_name: Deuter orcid: 0000-0002-6529-6215 citation: ama: 'Herrmann JP, Imort S, Trojanowski C, Deuter A. Requirements Elicitation for an Assistance System for Complexity Management in Product Development of SMEs during COVID-19: A Case Study. Computers. 2021;10(11). doi:10.3390/computers10110149' apa: 'Herrmann, J.-P., Imort, S., Trojanowski, C., & Deuter, A. (2021). Requirements Elicitation for an Assistance System for Complexity Management in Product Development of SMEs during COVID-19: A Case Study. Computers, 10(11), Article 149. https://doi.org/10.3390/computers10110149' bjps: 'Herrmann J-P et al. (2021) Requirements Elicitation for an Assistance System for Complexity Management in Product Development of SMEs during COVID-19: A Case Study. Computers 10.' chicago: 'Herrmann, Jan-Phillip, Sebastian Imort, Christoph Trojanowski, and Andreas Deuter. “Requirements Elicitation for an Assistance System for Complexity Management in Product Development of SMEs during COVID-19: A Case Study.” Computers 10, no. 11 (2021). https://doi.org/10.3390/computers10110149.' chicago-de: 'Herrmann, Jan-Phillip, Sebastian Imort, Christoph Trojanowski und Andreas Deuter. 2021. Requirements Elicitation for an Assistance System for Complexity Management in Product Development of SMEs during COVID-19: A Case Study. Computers 10, Nr. 11. doi:10.3390/computers10110149, .' din1505-2-1: 'Herrmann, Jan-Phillip ; Imort, Sebastian ; Trojanowski, Christoph ; Deuter, Andreas: Requirements Elicitation for an Assistance System for Complexity Management in Product Development of SMEs during COVID-19: A Case Study. In: Computers Bd. 10 (2021), Nr. 11' havard: 'J.-P. Herrmann, S. Imort, C. Trojanowski, A. Deuter, Requirements Elicitation for an Assistance System for Complexity Management in Product Development of SMEs during COVID-19: A Case Study, Computers. 10 (2021).' ieee: 'J.-P. Herrmann, S. Imort, C. Trojanowski, and A. Deuter, “Requirements Elicitation for an Assistance System for Complexity Management in Product Development of SMEs during COVID-19: A Case Study,” Computers, vol. 10, no. 11, Art. no. 149, 2021, doi: 10.3390/computers10110149.' mla: 'Herrmann, Jan-Phillip, et al. “Requirements Elicitation for an Assistance System for Complexity Management in Product Development of SMEs during COVID-19: A Case Study.” Computers, vol. 10, no. 11, 149, 2021, https://doi.org/10.3390/computers10110149.' short: J.-P. Herrmann, S. Imort, C. Trojanowski, A. Deuter, Computers 10 (2021). ufg: 'Herrmann, Jan-Phillip u. a.: Requirements Elicitation for an Assistance System for Complexity Management in Product Development of SMEs during COVID-19: A Case Study, in: Computers 10 (2021), H. 11.' van: 'Herrmann JP, Imort S, Trojanowski C, Deuter A. Requirements Elicitation for an Assistance System for Complexity Management in Product Development of SMEs during COVID-19: A Case Study. Computers. 2021;10(11).' date_created: 2022-02-08T14:48:19Z date_updated: 2025-06-26T13:37:00Z department: - _id: DEP7020 - _id: DEP7022 - _id: DEP1306 doi: 10.3390/computers10110149 external_id: isi: - '000727073200001' intvolume: ' 10' isi: '1' issue: '11' keyword: - complexity management - assistance system - product development - systems engineering - design structure matrix - asset administration shell language: - iso: eng publication: Computers publication_identifier: eissn: - 2073-431X publication_status: published status: public title: 'Requirements Elicitation for an Assistance System for Complexity Management in Product Development of SMEs during COVID-19: A Case Study' type: journal_article user_id: '83781' volume: 10 year: '2021' ... --- _id: '7781' abstract: - lang: eng text: Product lifecycle management (PLM) as a holistic process encompasses the idea generation for a product, its conception, and its production, as well as its operating phase. Numerous tools and data models are used throughout this process. In recent years, industry and academia have developed integration concepts to realize efficient PLM across all domains and phases. However, the solutions available in practice need specific interfaces and tend to be vendor dependent. The Asset Administration Shell (AAS) aims to be a standardized digital representation of an asset (e.g., a product). In accordance with its objective, it has the potential to integrate all data generated during the PLM process into one data model and to provide a universally valid interface for all PLM phases. However, to date, there is no holistic concept that demonstrates this potential. The goal of this research work is to develop and validate such an AAS-based concept. This article demonstrates the application of the AAS in an order-controlled production process, including the semi-automatic generation of PLM-related AAS data. Furthermore, it discusses the potential of the AAS as a standard interface providing a smooth data integration throughout the PLM process. article_number: '84' author: - first_name: Andreas full_name: Deuter, Andreas id: '62088' last_name: Deuter orcid: 0000-0002-6529-6215 - first_name: Sebastian full_name: Imort, Sebastian id: '74291' last_name: Imort citation: ama: 'Deuter A, Imort S. Product Lifecycle Management with the Asset Administration Shell. Computers : open access journal . 2021;10(7). doi:10.3390/computers10070084' apa: 'Deuter, A., & Imort, S. (2021). Product Lifecycle Management with the Asset Administration Shell. Computers : Open Access Journal , 10(7), Article 84. https://doi.org/10.3390/computers10070084' bjps: 'Deuter A and Imort S (2021) Product Lifecycle Management with the Asset Administration Shell. Computers : open access journal 10.' chicago: 'Deuter, Andreas, and Sebastian Imort. “Product Lifecycle Management with the Asset Administration Shell.” Computers : Open Access Journal 10, no. 7 (2021). https://doi.org/10.3390/computers10070084.' chicago-de: 'Deuter, Andreas und Sebastian Imort. 2021. Product Lifecycle Management with the Asset Administration Shell. Computers : open access journal 10, Nr. 7. doi:10.3390/computers10070084, .' din1505-2-1: 'Deuter, Andreas ; Imort, Sebastian: Product Lifecycle Management with the Asset Administration Shell. In: Computers : open access journal Bd. 10, MDPI (2021), Nr. 7' havard: 'A. Deuter, S. Imort, Product Lifecycle Management with the Asset Administration Shell, Computers : Open Access Journal . 10 (2021).' ieee: 'A. Deuter and S. Imort, “Product Lifecycle Management with the Asset Administration Shell,” Computers : open access journal , vol. 10, no. 7, Art. no. 84, 2021, doi: 10.3390/computers10070084.' mla: 'Deuter, Andreas, and Sebastian Imort. “Product Lifecycle Management with the Asset Administration Shell.” Computers : Open Access Journal , vol. 10, no. 7, 84, 2021, https://doi.org/10.3390/computers10070084.' short: 'A. Deuter, S. Imort, Computers : Open Access Journal 10 (2021).' ufg: 'Deuter, Andreas/Imort, Sebastian: Product Lifecycle Management with the Asset Administration Shell, in: Computers : open access journal 10 (2021), H. 7.' van: 'Deuter A, Imort S. Product Lifecycle Management with the Asset Administration Shell. Computers : open access journal . 2021;10(7).' date_created: 2022-04-25T10:13:30Z date_updated: 2025-06-26T13:41:54Z department: - _id: DEP7022 - _id: DEP1306 doi: 10.3390/computers10070084 external_id: isi: - '000676597000001' intvolume: ' 10' isi: '1' issue: '7' language: - iso: eng publication: 'Computers : open access journal ' publication_identifier: issn: - 2073-431X publication_status: published publisher: 'MDPI ' status: public title: Product Lifecycle Management with the Asset Administration Shell type: journal_article user_id: '83781' volume: 10 year: '2021' ... --- _id: '7789' author: - first_name: Marco full_name: Brand, Marco last_name: Brand - first_name: Andreas full_name: Deuter, Andreas id: '62088' last_name: Deuter - first_name: Lukas full_name: Galla, Lukas last_name: Galla - first_name: Florian full_name: Pethig, Florian last_name: Pethig date_created: 2022-04-25T10:52:55Z date_updated: 2023-03-15T13:50:11Z department: - _id: DEP7022 - _id: DEP1306 issue: 11-12 language: - iso: eng page: 24-27 publication: atp-magazin publication_identifier: issn: - 0178-2320 status: public title: 'Die Verwaltungsschale: vom Konzept über Metamodell zum Standard' type: journal_article user_id: '79260' year: 2020 ... --- _id: '12794' abstract: - lang: eng text: "Modern product development utilizes both Product Lifecycle Management (PLM) and Application Lifecycle Management (ALM). PLM addresses the hardware lifecycle of a product, whereas ALM addresses the software lifecycle. In recent years, industry and academia have developed several PLM/ALM integration concepts to realize efficient management of the product lifecycle across all domains. However, the solutions available in practice are typically vendor-driven. Therefore, they are not generally applicable even if standards such as OSLC (Open Services for Lifecycle Cooperation) are applied.\r\n\r\nThe consortium \"Plattform Industrie 4.0\" has recently introduced a standardized digital representation of an asset (e.g., a smart product): the Asset Administration Shell (AAS). The AAS has the potential to integrate PLM/ALM data sets in a single product model and hence to provide a generally applicable interface for PLM/ALM integration. However, until now there has not been a concept to prove this potential. The aim of this work is to develop such new strategies (named Plm4AAS) using AAS submodels. This article explains the semi-automatic generation of PLM/ALM submodels and how to link elements between these submodels. The AASX Package Explorer, an AAS management software tool, is used to demonstrate the results. The article finishes with a discussion about the potential of the AAS as a standardized concept for PLM/ALM integration. (C) 2020 The Authors. Published by Elsevier B.V. Peer-review under responsibility of the scientific committee of the 5th International Conference on System-Integrated Intelligence." author: - first_name: Andreas full_name: Deuter, Andreas id: '62088' last_name: Deuter orcid: 0000-0002-6529-6215 - first_name: Sebastian full_name: Imort, Sebastian id: '74291' last_name: Imort citation: ama: Deuter A, Imort S. PLM/ALM Integration With The Asset Administration Shell. Vol 52. (Thoben KD, Dekena B, Lang W, Trächtler A, eds.). Elsevier BV; 2020:234-240. doi:10.1016/j.promfg.2020.11.040 apa: 'Deuter, A., & Imort, S. (2020). PLM/ALM Integration With The Asset Administration Shell. In K.-D. Thoben, B. Dekena, W. Lang, & A. Trächtler (Eds.), System-Integrated Intelligence - Intelligent, Flexible and Connected Systems in Products and Production : Proceedings of the 5th International Conference on System-Integrated Intelligence (SysInt 2020), Bremen, Germany ( (Vol. 52, pp. 234–240). Elsevier BV. https://doi.org/10.1016/j.promfg.2020.11.040' bjps: Deuter A and Imort S (2020) PLM/ALM Integration With The Asset Administration Shell, Thoben K-D et al. (eds). Elsevier BV. chicago: 'Deuter, Andreas, and Sebastian Imort. PLM/ALM Integration With The Asset Administration Shell. Edited by Klaus-Dieter Thoben, Berend Dekena, Walter Lang, and Ansgar Trächtler. System-Integrated Intelligence - Intelligent, Flexible and Connected Systems in Products and Production : Proceedings of the 5th International Conference on System-Integrated Intelligence (SysInt 2020), Bremen, Germany (. Vol. 52. Procedia Manufacturing. Elsevier BV, 2020. https://doi.org/10.1016/j.promfg.2020.11.040.' chicago-de: 'Deuter, Andreas und Sebastian Imort. 2020. PLM/ALM Integration With The Asset Administration Shell. Hg. von Klaus-Dieter Thoben, Berend Dekena, Walter Lang, und Ansgar Trächtler. System-Integrated Intelligence - Intelligent, Flexible and Connected Systems in Products and Production : Proceedings of the 5th International Conference on System-Integrated Intelligence (SysInt 2020), Bremen, Germany (. Bd. 52. Procedia Manufacturing. Elsevier BV. doi:10.1016/j.promfg.2020.11.040, .' din1505-2-1: 'Deuter, Andreas ; Imort, Sebastian ; Thoben, K.-D. ; Dekena, B. ; Lang, W. ; Trächtler, A. (Hrsg.): PLM/ALM Integration With The Asset Administration Shell, Procedia Manufacturing. Bd. 52 : Elsevier BV, 2020' havard: A. Deuter, S. Imort, PLM/ALM Integration With The Asset Administration Shell, Elsevier BV, 2020. ieee: 'A. Deuter and S. Imort, PLM/ALM Integration With The Asset Administration Shell, vol. 52. Elsevier BV, 2020, pp. 234–240. doi: 10.1016/j.promfg.2020.11.040.' mla: 'Deuter, Andreas, and Sebastian Imort. “PLM/ALM Integration With The Asset Administration Shell.” System-Integrated Intelligence - Intelligent, Flexible and Connected Systems in Products and Production : Proceedings of the 5th International Conference on System-Integrated Intelligence (SysInt 2020), Bremen, Germany (, edited by Klaus-Dieter Thoben et al., vol. 52, Elsevier BV, 2020, pp. 234–40, https://doi.org/10.1016/j.promfg.2020.11.040.' short: A. Deuter, S. Imort, PLM/ALM Integration With The Asset Administration Shell, Elsevier BV, 2020. ufg: 'Deuter, Andreas/Imort, Sebastian: PLM/ALM Integration With The Asset Administration Shell, Bd. 52, hg. von Thoben, Klaus-Dieter u. a., o. O. 2020 (Procedia Manufacturing).' van: 'Deuter A, Imort S. PLM/ALM Integration With The Asset Administration Shell. Thoben KD, Dekena B, Lang W, Trächtler A, editors. System-Integrated Intelligence - Intelligent, Flexible and Connected Systems in Products and Production : Proceedings of the 5th International Conference on System-Integrated Intelligence (SysInt 2020), Bremen, Germany (. Elsevier BV; 2020. (Procedia Manufacturing; vol. 52).' conference: end_date: 2020-11-13 location: Online name: 5th International Conference on System-Integrated Intelligence (SysInt) start_date: 2020-11-11 date_created: 2025-04-15T10:20:05Z date_updated: 2025-06-26T13:40:25Z department: - _id: DEP7022 - _id: DEP1306 doi: 10.1016/j.promfg.2020.11.040 editor: - first_name: 'Klaus-Dieter ' full_name: 'Thoben, Klaus-Dieter ' last_name: Thoben - first_name: 'Berend ' full_name: 'Dekena, Berend ' last_name: Dekena - first_name: 'Walter ' full_name: ' Lang, Walter ' last_name: ' Lang' - first_name: Ansgar full_name: ' Trächtler, Ansgar' last_name: ' Trächtler' intvolume: ' 52' keyword: - PLM - ALM - ReqIF - PLM XML - OSLC - Asset Administration Shell language: - iso: eng page: 234-240 publication: 'System-Integrated Intelligence - Intelligent, Flexible and Connected Systems in Products and Production : Proceedings of the 5th International Conference on System-Integrated Intelligence (SysInt 2020), Bremen, Germany (' publication_identifier: issn: - 2351-9789 publication_status: published publisher: Elsevier BV series_title: Procedia Manufacturing status: public title: PLM/ALM Integration With The Asset Administration Shell type: conference_editor_article user_id: '83781' volume: 52 year: '2020' ... --- _id: '1908' abstract: - lang: eng text: 'It is our pleasure to introduce the 9th edition of the International Conference on Production Engineering and Management (PEM), an event that is the result of the joint effort ofthe University of Trieste and the OWL University of Applied Sciences and Arts. The conference has been established as an annual meeting under the Double Degree Master Program “Production Engineering and Management” by the two partner universities. This year the conference is hosted at the university campus in Trieste, Italy.The main goal of the conference is to offer students, researchers,and professionals in Italy, Germany, and abroad, an opportunity to meet and exchange information, discuss experience,specific practices, technical solutions for planning, design,and management of manufacturing, service systems,and processes. As always, the conference is a platform aimed at presenting research projects, introducing young academics to the tradition of symposiums and promoting the exchange of ideas between the industry and the academy.This year’s special focus is on green production and digital manufacturing in the context of Industry 4.0, which are currently major topics of discussion among experts and professionals. In fact, the features and problems of Industry 4.0 have been widely discussed in the last editions of the PEM conference, in which sustainability and efficiency emerged as key factors. With further study and development of direct digital manufacturing technologies in connection with new management practices and product life-cycle management, the 9th edition of the PEM conference aims to offer new and interesting scientific contributions.The conference program includes 32speeches organized in eight sessions. Two are specifically dedicated to “Direct Digital Manufacturing in the context of Industry 4.0”. The other sessions are covering areas of great interest and importance to the participants of the conference, which are related to the main focus: “Product Life-Cycle and Supply Chain Management”, “Industrial Engineering and Lean Management”, “Wood Processing Technologies and Furniture Production”, and “Innovative Management Techniques and Methodologies”. The proceedings of the conference include the articles submitted and accepted after a careful double-blind refereeing process.' citation: ama: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2019:325. apa: Padoano, E., Villmer, F.-J., & Department of Production Engineering and Management (Eds.). (2019). Production Engineering and Management (p. 325). Presented at the 9th International Conference, Lemgo. bjps: Padoano E, Villmer F-J and Department of Production Engineering and Management (eds) (2019) Production Engineering and Management. Lemgo. chicago: Padoano, Elio, Franz-Josef Villmer, and Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo, 2019. chicago-de: Padoano, Elio, Franz-Josef Villmer und Department of Production Engineering and Management, Hrsg. 2019. Production Engineering and Management. Lemgo. din1505-2-1: 'Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2019' havard: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, eds., Production Engineering and Management, Lemgo, 2019. ieee: E. Padoano, F.-J. Villmer, and Department of Production Engineering and Management, Eds., Production Engineering and Management, no. . Lemgo, 2019, p. 325. mla: Padoano, Elio, et al., editors. Production Engineering and Management. no. ., 2019, p. 325. short: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, eds., Production Engineering and Management, Lemgo, 2019. ufg: 'Padoano, Elio et. al. (Hgg.) (2019): Production Engineering and Management, Lemgo.' van: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2019. conference: end_date: 2019-10-04 location: Pardenone, Italy name: 9th International Conference start_date: 2019-10-03 corporate_editor: - Department of Production Engineering and Management - Technische Hochschule Ostwestfalen-Lippe date_created: 2018-12-04T16:24:04Z date_updated: 2023-03-15T13:49:37Z ddc: - '650' department: - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer issue: . language: - iso: eng main_file_link: - open_access: '1' url: https://www.th-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2019_proceedings_web.pdf oa: '1' page: '325' place: Lemgo publication_identifier: isbn: - 978-3-946856-04-7 publication_status: published status: public title: Production Engineering and Management type: conference_editor user_id: '68554' year: 2019 ... --- _id: '1909' abstract: - lang: eng text: 'Shop floor management is an important component of the Toyota Production System. The main task of shop floor management is to sustainably increase efficiency and quality in production. The objective of this paper is to identify potentials for improvement of shop floor management in the context of digitalization and to identify fields of action. As a result, the paper will show that insufficiently designed business processes, in particular, lead to additional administrative work for managers. Therefore, optimizing processes can also be seen as a key to giving managers more time for real management tasks. In addition, shop floor management can be strengthened by improving e-mail communication and meeting organization practices, as well as by making reporting more automated and more user-friendly. ' author: - first_name: Linda full_name: Materna, Linda id: '70204' last_name: Materna - first_name: Sven full_name: Hinrichsen, Sven id: '49010' last_name: Hinrichsen - first_name: Benjamin full_name: Adrian, Benjamin id: '42266' last_name: Adrian - first_name: Andreas full_name: Schulz, Andreas id: '65032' last_name: Schulz citation: ama: 'Materna L, Hinrichsen S, Adrian B, Schulz A. How to Improve Shop Floor Management. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2019:179-188.' apa: Materna, L., Hinrichsen, S., Adrian, B., & Schulz, A. (2019). How to Improve Shop Floor Management. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 179–188). Lemgo. bjps: Materna L et al. (2019) How to Improve Shop Floor Management. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 179–188. chicago: Materna, Linda, Sven Hinrichsen, Benjamin Adrian, and Andreas Schulz. “How to Improve Shop Floor Management.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 179–88. Lemgo, 2019. chicago-de: 'Materna, Linda, Sven Hinrichsen, Benjamin Adrian und Andreas Schulz. 2019. How to Improve Shop Floor Management. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 179–188. Lemgo.' din1505-2-1: 'Materna, Linda ; Hinrichsen, Sven ; Adrian, Benjamin ; Schulz, Andreas: How to Improve Shop Floor Management. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2019, S. 179–188' havard: 'L. Materna, S. Hinrichsen, B. Adrian, A. Schulz, How to Improve Shop Floor Management, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2019: pp. 179–188.' ieee: L. Materna, S. Hinrichsen, B. Adrian, and A. Schulz, “How to Improve Shop Floor Management,” in Production Engineering and Management, Trieste, Italy, 2019, pp. 179–188. mla: Materna, Linda, et al. “How to Improve Shop Floor Management.” Production Engineering and Management, edited by Elio Padoano et al., 2019, pp. 179–88. short: 'L. Materna, S. Hinrichsen, B. Adrian, A. Schulz, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2019, pp. 179–188.' ufg: 'Materna, Linda et. al. (2019): How to Improve Shop Floor Management, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 179–188.' van: 'Materna L, Hinrichsen S, Adrian B, Schulz A. How to Improve Shop Floor Management. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2019. p. 179–88.' conference: end_date: 2019-10-04 location: Trieste, Italy name: Proceedings 9th International Conference start_date: 2019-10-03 corporate_editor: - Department of Production Engineering and Management - Technische Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T11:34:36Z date_updated: 2023-03-15T13:49:37Z department: - _id: DEP1306 - _id: DEP7020 - _id: DEP1305 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer keyword: - Shop floor management - Leadership - Digitalization language: - iso: eng main_file_link: - open_access: '1' url: https://www.th-owl.de/fb7/fileadmin/download/labore/industrialengineering/pdf/Veroeffentlichungen/PEM_2019_How_to_Improve_Shop_Floor_Management.pdf oa: '1' page: 179-188 place: Lemgo publication: Production Engineering and Management publication_status: published quality_controlled: '1' status: public title: How to Improve Shop Floor Management type: conference user_id: '49010' year: 2019 ... --- _id: '1911' abstract: - lang: eng text: Reading about small and medium-sized manufacturing companies in newspapers and magazines, one might get the impression that integrating and exploiting new digital technologies is one of the most urgent challenges for managers today. Although many different industry 4.0 and Internet of Things (IoT) tests have been published, a framework to structure the content and the process of digital transformation is missing. Therefore, comprehensive research of available literature has been implemented; the results show that the framework from Appelfeller and Feldmann is the most suitable for application in companies. Due to the fact that the authors present no acquired experience in the application of the framework in practice, an evaluation study was set up in companies. The results of a case study are presented and an overview is given how to implement this specific check in a company. author: - first_name: Sven full_name: Tackenberg, Sven id: '71470' last_name: Tackenberg - first_name: Wilfried full_name: Jungkind, Wilfried id: '14059' last_name: Jungkind - first_name: C. full_name: Feldmann, C. last_name: Feldmann - first_name: W. full_name: Appelfeller, W. last_name: Appelfeller citation: ama: 'Tackenberg S, Jungkind W, Feldmann C, Appelfeller W. Digital Transformation of Companies: Experience gained in the Implementation of an IOT Check. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2019:281-290.' apa: 'Tackenberg, S., Jungkind, W., Feldmann, C., & Appelfeller, W. (2019). Digital Transformation of Companies: Experience gained in the Implementation of an IOT Check. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 281–290). Lemgo.' bjps: 'Tackenberg S et al. (2019) Digital Transformation of Companies: Experience Gained in the Implementation of an IOT Check. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 281–290.' chicago: 'Tackenberg, Sven, Wilfried Jungkind, C. Feldmann, and W. Appelfeller. “Digital Transformation of Companies: Experience Gained in the Implementation of an IOT Check.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 281–90. Lemgo, 2019.' chicago-de: 'Tackenberg, Sven, Wilfried Jungkind, C. Feldmann und W. Appelfeller. 2019. Digital Transformation of Companies: Experience gained in the Implementation of an IOT Check. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 281–290. Lemgo.' din1505-2-1: 'Tackenberg, Sven ; Jungkind, Wilfried ; Feldmann, C. ; Appelfeller, W.: Digital Transformation of Companies: Experience gained in the Implementation of an IOT Check. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2019, S. 281–290' havard: 'S. Tackenberg, W. Jungkind, C. Feldmann, W. Appelfeller, Digital Transformation of Companies: Experience gained in the Implementation of an IOT Check, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2019: pp. 281–290.' ieee: 'S. Tackenberg, W. Jungkind, C. Feldmann, and W. Appelfeller, “Digital Transformation of Companies: Experience gained in the Implementation of an IOT Check,” in Production Engineering and Management, Trieste, Italy, 2019, pp. 281–290.' mla: 'Tackenberg, Sven, et al. “Digital Transformation of Companies: Experience Gained in the Implementation of an IOT Check.” Production Engineering and Management, edited by Elio Padoano et al., 2019, pp. 281–90.' short: 'S. Tackenberg, W. Jungkind, C. Feldmann, W. Appelfeller, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2019, pp. 281–290.' ufg: 'Tackenberg, Sven et. al. (2019): Digital Transformation of Companies: Experience gained in the Implementation of an IOT Check, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 281–290.' van: 'Tackenberg S, Jungkind W, Feldmann C, Appelfeller W. Digital Transformation of Companies: Experience gained in the Implementation of an IOT Check. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2019. p. 281–90.' conference: end_date: 2019-10-04 location: Trieste, Italy name: Proceedings 9th International Conference start_date: 2019-10-03 corporate_editor: - Department of Production Engineering and Management - Technische Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T11:34:36Z date_updated: 2023-03-15T13:49:37Z department: - _id: DEP1306 - _id: DEP7020 - _id: DEP1305 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer keyword: - Digital transformation - Maturity model - Check language: - iso: eng page: 281-290 place: Lemgo publication: Production Engineering and Management publication_status: published status: public title: 'Digital Transformation of Companies: Experience gained in the Implementation of an IOT Check' type: conference user_id: '74004' year: 2019 ... --- _id: '7783' abstract: - lang: eng text: The digitization of the industry, the drive towards smart factories as well as the Internet of Production (IoP) require rising smartness of products and services. Smart physical products are often mechatronic products that include increasing amounts of software. The development of software, however, comes along with new challenges for companies specialized in developing mechanical, electrical or electronic products. Some of these challenges address the product lifecycle management (PLM)-related business and work processes. The management of software lifecycles requires a much more rigorous requirements management. Furthermore, special solutions for management of source code in distributed development teams are needed. The build-process and testing activities need to be conducted in a systematic manner. The generation and provision of different licensing models need to be mastered and finally the issue of security needs to be addressed for any product that can be networked---which by the way is a strategic target of nearly any product developing company. Application Lifecycle Management (ALM) covers many of the above-mentioned issues. IT solutions for ALM are comparable to traditional PLM solutions, but focus particularly on software as a product. Thus, these systems have become widely used by software companies in the same manner as PLM solutions belong to the standard enterprise IT environment of companies developing physical products. With software penetrating traditional physical products, product managers, product developers, manufacturing staff etc. need to work with both, PLM and ALM, since neither solution is able to cover both domains sufficiently. However, ALM and PLM solutions feature redundant functionality. Thus, best practices for the systematic integration of ALM and PLM are required. author: - first_name: Andreas full_name: Deuter, Andreas id: '62088' last_name: Deuter orcid: 0000-0002-6529-6215 - first_name: Andreas full_name: Otte, Andreas id: '51466' last_name: Otte - first_name: Marcel full_name: Ebert, Marcel last_name: Ebert - first_name: Frank full_name: Possel-Dölken, Frank last_name: Possel-Dölken citation: ama: 'Deuter A, Otte A, Ebert M, Possel-Dölken F. Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study. In: Stark J, ed. Product Lifecycle Management (Volume 4). Decision Engineering. Springer; 2019:125-143. doi:10.1007/978-3-030-16134-7_11' apa: 'Deuter, A., Otte, A., Ebert, M., & Possel-Dölken, F. (2019). Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study. In J. Stark (Ed.), Product lifecycle management (Volume 4) (pp. 125–143). Springer. https://doi.org/10.1007/978-3-030-16134-7_11' bjps: 'Deuter A et al. (2019) Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study. In Stark J (ed.), Product Lifecycle Management (Volume 4). Cham, Switzerland: Springer, pp. 125–143.' chicago: 'Deuter, Andreas, Andreas Otte, Marcel Ebert, and Frank Possel-Dölken. “Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study.” In Product Lifecycle Management (Volume 4), edited by John Stark, 125–43. Decision Engineering. Cham, Switzerland: Springer, 2019. https://doi.org/10.1007/978-3-030-16134-7_11.' chicago-de: 'Deuter, Andreas, Andreas Otte, Marcel Ebert und Frank Possel-Dölken. 2019. Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study. In: Product lifecycle management (Volume 4), hg. von John Stark, 125–143. Decision Engineering. Cham, Switzerland: Springer. doi:10.1007/978-3-030-16134-7_11, .' din1505-2-1: 'Deuter, Andreas ; Otte, Andreas ; Ebert, Marcel ; Possel-Dölken, Frank: Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study. In: Stark, J. (Hrsg.): Product lifecycle management (Volume 4), Decision Engineering. Cham, Switzerland : Springer, 2019, S. 125–143' havard: 'A. Deuter, A. Otte, M. Ebert, F. Possel-Dölken, Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study, in: J. Stark (Ed.), Product Lifecycle Management (Volume 4), Springer, Cham, Switzerland, 2019: pp. 125–143.' ieee: 'A. Deuter, A. Otte, M. Ebert, and F. Possel-Dölken, “Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study,” in Product lifecycle management (Volume 4), J. Stark, Ed. Cham, Switzerland: Springer, 2019, pp. 125–143. doi: 10.1007/978-3-030-16134-7_11.' mla: 'Deuter, Andreas, et al. “Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study.” Product Lifecycle Management (Volume 4), edited by John Stark, Springer, 2019, pp. 125–43, https://doi.org/10.1007/978-3-030-16134-7_11.' short: 'A. Deuter, A. Otte, M. Ebert, F. Possel-Dölken, in: J. Stark (Ed.), Product Lifecycle Management (Volume 4), Springer, Cham, Switzerland, 2019, pp. 125–143.' ufg: 'Deuter, Andreas u. a.: Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study, in: Stark, John (Hg.): Product lifecycle management (Volume 4), Cham, Switzerland 2019 (Decision Engineering),  S. 125–143.' van: 'Deuter A, Otte A, Ebert M, Possel-Dölken F. Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study. In: Stark J, editor. Product lifecycle management (Volume 4). Cham, Switzerland: Springer; 2019. p. 125–43. (Decision Engineering).' date_created: 2022-04-25T10:46:14Z date_updated: 2025-06-26T13:40:03Z department: - _id: DEP7022 - _id: DEP1306 doi: 10.1007/978-3-030-16134-7_11 editor: - first_name: John full_name: Stark, John last_name: Stark keyword: - Product lifecycle management - Application Lifecycle Management - Smart products - Systems engineering language: - iso: eng page: 125-143 place: Cham, Switzerland publication: Product lifecycle management (Volume 4) publication_identifier: eisbn: - 978-3-030-16134-7 eissn: - 2197-6589 isbn: - 978-3-030-16133-0 issn: - 1619-5736 publication_status: published publisher: Springer series_title: Decision Engineering status: public title: 'Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study' type: book_chapter user_id: '83781' year: '2019' ... --- _id: '7784' author: - first_name: Andreas full_name: Deuter, Andreas id: '62088' last_name: Deuter - first_name: Florian full_name: Pethig, Florian last_name: Pethig date_created: 2022-04-25T10:49:42Z date_updated: 2023-03-15T13:50:11Z department: - _id: DEP7022 - _id: DEP1306 issue: 11-12 language: - iso: eng page: 28-31 publication: atp-magazin publication_identifier: issn: - 0178-2320 status: public title: 'The Digital Twin Theory: Umsetzung mit der Industrie 4.0-Verwaltungsschale' type: journal_article user_id: '79260' year: 2019 ... --- _id: '7785' abstract: - lang: eng text: Im digitalen Zwilling wird ein wesentliches Mittel f{\"u}r Produktivit{\"a}tssteigerungen im Zeitalter der industriellen Digitalisierung gesehen. Daher besch{\"a}ftigen sich zahlreiche Publikationen mit diesem Begriff. Dieser Beitrag zeigt zun{\"a}chst die Urspr{\"u}nge des Begriffs und setzt sich mit ausgew{\"a}hlten Definitionen auseinander. Diese unterst{\"u}tzen allerdings wenig bei der praktischen Implementierung von digitalen Zwillingen, da sich die Definitionen zum Teil stark unterscheiden. Als Alternative zu einer klassischen Definition wird daher ein Theoriemodell vorgeschlagen, das Annahmen {\"u}ber den digitalen Zwilling enth{\"a}lt. Dieser neuartige Denkansatz soll helfen, das Management von digitalen Zwillingen in der Praxis zu verbessern. author: - first_name: Andreas full_name: Deuter, Andreas id: '62088' last_name: Deuter - first_name: Florian full_name: Pethig, Florian last_name: Pethig date_created: 2022-04-25T10:50:45Z date_updated: 2023-03-15T13:50:11Z department: - _id: DEP1306 doi: 10.30844/I40M_19-1_S27-30 intvolume: ' 35' issue: '1' language: - iso: eng page: 27-30 publication: Industrie 4.0 Management status: public title: The Digital Twin Theory - Eine neue Sicht auf ein Modewort type: journal_article user_id: '79260' volume: 35 year: 2019 ... --- _id: '221' abstract: - lang: eng text: Manual assembly workers are usually presented with information on shop floor papers using conventional design elements such as text, tables or drawings. New technological capabilities such as assembly assistance systems can enable more efficient and human-centered delivery of information in manual assembly environments. With this in mind, a method for assessing the economic and human-centered potential of informational assembly assistance systems for a specific work system will be developed. author: - first_name: Sven full_name: Bendzioch, Sven id: '71395' last_name: Bendzioch - first_name: Sven full_name: Hinrichsen, Sven id: '49010' last_name: Hinrichsen - first_name: Benjamin full_name: Adrian, Benjamin id: '42266' last_name: Adrian - first_name: Manfred full_name: Bornewasser, Manfred last_name: Bornewasser citation: ama: 'Bendzioch S, Hinrichsen S, Adrian B, Bornewasser M. Assessing the Economic and Human-Centered Potential of Assembly Assistance Systems. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Publication series in direct digital manufacturing. Lemgo; 2018:127-136.' apa: Bendzioch, S., Hinrichsen, S., Adrian, B., & Bornewasser, M. (2018). Assessing the Economic and Human-Centered Potential of Assembly Assistance Systems. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Production engineering and management (pp. 127–136). Lemgo. bjps: Bendzioch S et al. (2018) Assessing the Economic and Human-Centered Potential of Assembly Assistance Systems. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 127–136. chicago: Bendzioch, Sven, Sven Hinrichsen, Benjamin Adrian, and Manfred Bornewasser. “Assessing the Economic and Human-Centered Potential of Assembly Assistance Systems.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 127–36. Publication Series in Direct Digital Manufacturing. Lemgo, 2018. chicago-de: 'Bendzioch, Sven, Sven Hinrichsen, Benjamin Adrian und Manfred Bornewasser. 2018. Assessing the Economic and Human-Centered Potential of Assembly Assistance Systems. In: Production engineering and management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 127–136. Publication series in direct digital manufacturing. Lemgo.' din1505-2-1: 'Bendzioch, Sven ; Hinrichsen, Sven ; Adrian, Benjamin ; Bornewasser, Manfred: Assessing the Economic and Human-Centered Potential of Assembly Assistance Systems. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production engineering and management, Publication series in direct digital manufacturing. Lemgo, 2018, S. 127–136' havard: 'S. Bendzioch, S. Hinrichsen, B. Adrian, M. Bornewasser, Assessing the Economic and Human-Centered Potential of Assembly Assistance Systems, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp. 127–136.' ieee: S. Bendzioch, S. Hinrichsen, B. Adrian, and M. Bornewasser, “Assessing the Economic and Human-Centered Potential of Assembly Assistance Systems,” in Production engineering and management, Lemgo, 2018, no. 1, pp. 127–136. mla: Bendzioch, Sven, et al. “Assessing the Economic and Human-Centered Potential of Assembly Assistance Systems.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 127–36. short: 'S. Bendzioch, S. Hinrichsen, B. Adrian, M. Bornewasser, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018, pp. 127–136.' ufg: 'Bendzioch, Sven et. al. (2018): Assessing the Economic and Human-Centered Potential of Assembly Assistance Systems, in: Franz-Josef Villmer et. al. (Hgg.): Production engineering and management (=Publication series in direct digital manufacturing), Lemgo, S. 127–136.' van: 'Bendzioch S, Hinrichsen S, Adrian B, Bornewasser M. Assessing the Economic and Human-Centered Potential of Assembly Assistance Systems. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production engineering and management. Lemgo; 2018. p. 127–36. (Publication series in direct digital manufacturing).' conference: end_date: 2018-10-05 location: Lemgo name: Proceedings 8 th International Conference start_date: 2018-10-04 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2018-11-06T12:59:23Z date_updated: 2023-03-15T13:49:39Z department: - _id: DEP7020 - _id: DEP1306 - _id: DEP1305 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' language: - iso: eng page: 127-136 place: Lemgo project: - _id: FBB6D104-44D9-11E9-AA25-B54CDB794CE1 name: Montexas 4.0 publication: Production engineering and management publication_status: published quality_controlled: '1' series_title: Publication series in direct digital manufacturing status: public title: Assessing the Economic and Human-Centered Potential of Assembly Assistance Systems type: conference user_id: '15514' year: 2018 ... --- _id: '549' author: - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Sarah full_name: Nothdurft, Sarah last_name: Nothdurft - first_name: Rabi full_name: Lahdo, Rabi last_name: Lahdo - first_name: Oliver full_name: Seffer, Oliver last_name: Seffer citation: ama: 'Springer A, Nothdurft S, Lahdo R, Seffer O. Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. Lemgo: Technische Hochschule Ostwestfalen-Lippe; 2018.' apa: 'Springer, A., Nothdurft, S., Lahdo, R., & Seffer, O. (2018). Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. 8th International Conference on Production Engineering and Management. Lemgo: Technische Hochschule Ostwestfalen-Lippe.' bjps: 'Springer A et al. (2018) Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. Lemgo: Technische Hochschule Ostwestfalen-Lippe.' chicago: 'Springer, André, Sarah Nothdurft, Rabi Lahdo, and Oliver Seffer. Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. 8th International Conference on Production Engineering and Management. Lemgo: Technische Hochschule Ostwestfalen-Lippe, 2018.' chicago-de: 'Springer, André, Sarah Nothdurft, Rabi Lahdo und Oliver Seffer. 2018. Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. 8th International Conference on Production Engineering and Management. Lemgo: Technische Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Springer, André ; Nothdurft, Sarah ; Lahdo, Rabi ; Seffer, Oliver: Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. Lemgo : Technische Hochschule Ostwestfalen-Lippe, 2018' havard: A. Springer, S. Nothdurft, R. Lahdo, O. Seffer, Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow, Technische Hochschule Ostwestfalen-Lippe, Lemgo, 2018. ieee: 'A. Springer, S. Nothdurft, R. Lahdo, and O. Seffer, Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. Lemgo: Technische Hochschule Ostwestfalen-Lippe, 2018.' mla: Springer, André, et al. “Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow.” 8th International Conference on Production Engineering and Management, Technische Hochschule Ostwestfalen-Lippe, 2018. short: A. Springer, S. Nothdurft, R. Lahdo, O. Seffer, Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow, Technische Hochschule Ostwestfalen-Lippe, Lemgo, 2018. ufg: 'Springer, André et. al. (2018): Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow, Lemgo.' van: 'Springer A, Nothdurft S, Lahdo R, Seffer O. Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. 8th International Conference on Production Engineering and Management. Lemgo: Technische Hochschule Ostwestfalen-Lippe; 2018.' conference: end_date: 2018-10-05 location: Lemgo name: 8th International Conference start_date: 2018-10-04 date_created: 2019-02-13T13:42:56Z date_updated: 2023-03-15T13:49:59Z department: - _id: DEP1306 - _id: DEP7037 keyword: - Dissimilar metal joints - Laser processes - Multi-material components language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf oa: '1' place: Lemgo publication: 8th International Conference on Production Engineering and Management publication_identifier: isbn: - 978-3-946856-03-0 publication_status: published publisher: Technische Hochschule Ostwestfalen-Lippe related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf status: public title: Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow type: conference_editor_article user_id: '79260' year: 2018 ... --- _id: '550' abstract: - lang: eng text: Additive Manufacturing (AM) technologies are increasingly used for final part production. Especially technologies for processing of metal, like Selective LaserMelting (SLM), arefocusedin this area. The shift from prototyping towards final part production results in enhanced requirements for repeatability and predictability of the part quality. Machine manufacturers offer process monitoring solutions for different aspects of the production process, like the powder bed surface, the melt pool, and the laser energy. Nevertheless, the significance of these systems is not fully proven and threshold values for the monitored process parameters have to be determined for each product individually. This impedes the development of suitable process control systems. The paper gives an overview ofexistingresearch approaches and available process monitoring systems for SLM and their applicability for predicting certain part characteristics. The existing solutions are evaluated based on own research results. Next, AM specific difficulties for the development of process control tools and possible solutions are discussed. author: - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: 'Huxol A, Villmer F-J. Process Control for Selective Laser Melting - Opprtunities and Limitations. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2018:17-28.' apa: Huxol, A., & Villmer, F.-J. (2018). Process Control for Selective Laser Melting - Opprtunities and Limitations. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 17–28). Lemgo. bjps: Huxol A and Villmer F-J (2018) Process Control for Selective Laser Melting - Opprtunities and Limitations. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 17–28. chicago: Huxol, Andrea, and Franz-Josef Villmer. “Process Control for Selective Laser Melting - Opprtunities and Limitations.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 17–28. Lemgo, 2018. chicago-de: 'Huxol, Andrea und Franz-Josef Villmer. 2018. Process Control for Selective Laser Melting - Opprtunities and Limitations. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 17–28. Lemgo.' din1505-2-1: 'Huxol, Andrea ; Villmer, Franz-Josef: Process Control for Selective Laser Melting - Opprtunities and Limitations. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2018, S. 17–28' havard: 'A. Huxol, F.-J. Villmer, Process Control for Selective Laser Melting - Opprtunities and Limitations, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp. 17–28.' ieee: A. Huxol and F.-J. Villmer, “Process Control for Selective Laser Melting - Opprtunities and Limitations,” in Production Engineering and Management, Lemgo, 2018, no. 1, pp. 17–28. mla: Huxol, Andrea, and Franz-Josef Villmer. “Process Control for Selective Laser Melting - Opprtunities and Limitations.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 17–28. short: 'A. Huxol, F.-J. Villmer, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018, pp. 17–28.' ufg: 'Huxol, Andrea/Villmer, Franz-Josef (2018): Process Control for Selective Laser Melting - Opprtunities and Limitations, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 17–28.' van: 'Huxol A, Villmer F-J. Process Control for Selective Laser Melting - Opprtunities and Limitations. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2018. p. 17–28.' conference: end_date: 2018-10-05 location: Lemgo name: Proceedings 8th International Conference start_date: 2018-10-04 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-13T13:55:29Z date_updated: 2023-03-15T13:50:00Z department: - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Additive manufacturing - Process capability - Process monitoring - Quality assurance - Final part production language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf oa: '1' page: 17-28 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-946856-03-0 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf status: public title: Process Control for Selective Laser Melting - Opprtunities and Limitations type: conference user_id: '45673' year: 2018 ... --- _id: '551' abstract: - lang: eng text: Companies that use product lifecycle management (PLM) systems need to configure them individually. Such configuration is considered as a software development process. This article demonstrates how the software development process for PLM configuration can be improved by applying applicationlifecycle management (ALM) concepts. This paper explains how such a conceptdesigncan be created and implemented. The concept was evaluated in a real industrial case study. By this, it provides valuable insights useablefor any company, facing similar challenges as depicted in this paper. author: - first_name: Martin full_name: Heister, Martin id: '68780' last_name: Heister - first_name: Andreas full_name: Deuter, Andreas id: '62088' last_name: Deuter - first_name: B. full_name: Schrader, B. last_name: Schrader citation: ama: 'Heister M, Deuter A, Schrader B. Design of an ALM-Based Process for Configuring PLM Systems. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2018:31-41.' apa: Heister, M., Deuter, A., & Schrader, B. (2018). Design of an ALM-Based Process for Configuring PLM Systems. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 31–41). Lemgo. bjps: Heister M, Deuter A and Schrader B (2018) Design of an ALM-Based Process for Configuring PLM Systems. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 31–41. chicago: Heister, Martin, Andreas Deuter, and B. Schrader. “Design of an ALM-Based Process for Configuring PLM Systems.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 31–41. Lemgo, 2018. chicago-de: 'Heister, Martin, Andreas Deuter und B. Schrader. 2018. Design of an ALM-Based Process for Configuring PLM Systems. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 31–41. Lemgo.' din1505-2-1: 'Heister, Martin ; Deuter, Andreas ; Schrader, B.: Design of an ALM-Based Process for Configuring PLM Systems. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2018, S. 31–41' havard: 'M. Heister, A. Deuter, B. Schrader, Design of an ALM-Based Process for Configuring PLM Systems, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp. 31–41.' ieee: M. Heister, A. Deuter, and B. Schrader, “Design of an ALM-Based Process for Configuring PLM Systems,” in Production Engineering and Management, Lemgo, 2018, no. 1, pp. 31–41. mla: Heister, Martin, et al. “Design of an ALM-Based Process for Configuring PLM Systems.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 31–41. short: 'M. Heister, A. Deuter, B. Schrader, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018, pp. 31–41.' ufg: 'Heister, Martin et. al. (2018): Design of an ALM-Based Process for Configuring PLM Systems, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 31–41.' van: 'Heister M, Deuter A, Schrader B. Design of an ALM-Based Process for Configuring PLM Systems. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2018. p. 31–41.' conference: end_date: 2018-10-05 location: Lemgo name: Proceedings 8th International Conference start_date: 2018-10-04 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-13T14:03:03Z date_updated: 2023-03-15T13:50:00Z department: - _id: DEP1306 - _id: DEP7022 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - PLM - ALM - Software engineering - V-model - Scrum language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf oa: '1' page: 31-41 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-946856-03-0 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf status: public title: Design of an ALM-Based Process for Configuring PLM Systems type: conference user_id: '62088' year: 2018 ... --- _id: '552' abstract: - lang: eng text: 'Since additive manufacturing (AM) is continuously growing, the influence of processing conditions and setup parameters on microstructural and mechanical properties of additively manufacturedcomponents needs to be clarified. The paper discusses an experimental approach for the identification of influencing parameters in Selective Laser Melting; this consists of an evaluation of the mechanical and physical properties of final parts, depending on the chosen process parameters. The Design of Experiments is used to get valid results from a limited number of experiments. The research work focuses on the application of a Definitive Screening Design to identify the most important influencing parameters: Several parameters of the hatch and the contour exposure are varied, as well as the position and orientation of the samples in the build chamber. A maraging steel and a CoCr alloy are used, and the mechanical and physical properties of the samples are evaluated. The interdependencies between the variation of the factors and the observed properties are analyzed.' author: - first_name: F. full_name: Simoni, F. last_name: Simoni - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: 'Simoni F, Huxol A, Villmer F-J. Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2018:43-55.' apa: Simoni, F., Huxol, A., & Villmer, F.-J. (2018). Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 43–55). Lemgo. bjps: Simoni F, Huxol A and Villmer F-J (2018) Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 43–55. chicago: Simoni, F., Andrea Huxol, and Franz-Josef Villmer. “Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 43–55. Lemgo, 2018. chicago-de: 'Simoni, F., Andrea Huxol und Franz-Josef Villmer. 2018. Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 43–55. Lemgo.' din1505-2-1: 'Simoni, F. ; Huxol, Andrea ; Villmer, Franz-Josef: Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2018, S. 43–55' havard: 'F. Simoni, A. Huxol, F.-J. Villmer, Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp. 43–55.' ieee: F. Simoni, A. Huxol, and F.-J. Villmer, “Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts,” in Production Engineering and Management, Lemgo, 2018, no. 1, pp. 43–55. mla: Simoni, F., et al. “Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 43–55. short: 'F. Simoni, A. Huxol, F.-J. Villmer, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018, pp. 43–55.' ufg: 'Simoni, F. et. al. (2018): Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 43–55.' van: 'Simoni F, Huxol A, Villmer F-J. Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2018. p. 43–55.' conference: end_date: 2018-10-05 location: Lemgo name: Proceedings 8th International Conference start_date: 2018-10-04 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-13T14:11:15Z date_updated: 2023-03-15T13:50:00Z department: - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Additive manufacturing - Process parameters - Design of Experiments - Density measurement language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf oa: '1' page: 43-55 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-946856-03-0 publication_status: published status: public title: Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts type: conference user_id: '45673' year: 2018 ... --- _id: '553' abstract: - lang: eng text: Selective laser melting is a powder bed fusion technology that uses a laser as an energy source in order to directly build fullydensemetal parts. Optimal fabrication requires a comprehensiveunderstanding of the main processing,as it affectsthe part quality. Wherefore, the objective of this paper is to perform a survey, data checking and collecting ofprovided parameters to compare and contextualize it versus the respective values used in the processby the research studies. The work is focused on cobalt-chromium alloys (CoCr) which are widely used in dental and medical applications. This work focusesonsurfacequality and hardness as built and after the post-processes. As well, the approaches in bond strength after post-processing are considered, comparing the results made by different manufacturing techniques. Finally, this work compares results acquired in surface roughness asbuilt, and tensile strength of parts made by selective laser melting versus the traditional technique cast, before and after heat treatment. author: - first_name: Joyce full_name: Silva Gimenes Gandara, Joyce id: '70765' last_name: Silva Gimenes Gandara - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: 'Silva Gimenes Gandara J, Huxol A, Villmer F-J. Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2018:57-69.' apa: 'Silva Gimenes Gandara, J., Huxol, A., & Villmer, F.-J. (2018). Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 57–69). Lemgo.' bjps: 'Silva Gimenes Gandara J, Huxol A and Villmer F-J (2018) Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 57–69.' chicago: 'Silva Gimenes Gandara, Joyce, Andrea Huxol, and Franz-Josef Villmer. “Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 57–69. Lemgo, 2018.' chicago-de: 'Silva Gimenes Gandara, Joyce, Andrea Huxol und Franz-Josef Villmer. 2018. Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 57–69. Lemgo.' din1505-2-1: 'Silva Gimenes Gandara, Joyce ; Huxol, Andrea ; Villmer, Franz-Josef: Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2018, S. 57–69' havard: 'J. Silva Gimenes Gandara, A. Huxol, F.-J. Villmer, Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp. 57–69.' ieee: 'J. Silva Gimenes Gandara, A. Huxol, and F.-J. Villmer, “Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results,” in Production Engineering and Management, 2018, no. 1, pp. 57–69.' mla: 'Silva Gimenes Gandara, Joyce, et al. “Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 57–69.' short: 'J. Silva Gimenes Gandara, A. Huxol, F.-J. Villmer, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018, pp. 57–69.' ufg: 'Silva Gimenes Gandara, Joyce et. al. (2018): Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 57–69.' van: 'Silva Gimenes Gandara J, Huxol A, Villmer F-J. Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2018. p. 57–69.' conference: end_date: 2018-10-05 name: Proceedings 8th International Conference start_date: 2018-10-04 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-13T14:20:54Z date_updated: 2023-03-15T13:50:00Z department: - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Additive manufacturing - Material properties - Part properties - Process parameters language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf oa: '1' page: 57-69 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-946856-03-0 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf status: public title: 'Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results' type: conference user_id: '45673' year: 2018 ... --- _id: '554' abstract: - lang: eng text: Light guiding structures, like optical waveguides or fibers, take an important role in several industries, e.g. communication, sensing, illumination or medical applications. For the latter, it could be very interesting to have the possibility to manufacture problem-adapted structureswith a mechanicalfunctionality andwith additional embedded optical or electrical sensor functionalities.Modern additive manufacturing (AM) technologies like Stereolithography (SLA) or Fused Layer Modeling (FLM) may provide these opportunities.This paper is aimedto figure out the light guiding opportunities of both technologies. For this different kind of structures are built by FLM and SLA. To compare both manufacturing technologies, the layout of each structure is identical for both technologies. After manufacturing, the transmission and the attenuation of the guided light of these structures areanalyzed by measurement.Then the measurement results of the different technologies are compared with each other. author: - first_name: Micha full_name: Beyer, Micha id: '71403' last_name: Beyer - first_name: Oliver full_name: Stübbe, Oliver id: '51864' last_name: Stübbe orcid: https://orcid.org/0000-0001-7293-6893 - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: 'Beyer M, Stübbe O, Villmer FJ. Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications. In: Villmer FJ, Padoano E, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management : Proceedings 8th International Conference, October 04 and 05, 2018, Lemgo, Germany. Publication series in direct digital manufacturing. ; 2018:70-82.' apa: 'Beyer, M., Stübbe, O., & Villmer, F.-J. (2018). Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications. In F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe (Eds.), Production engineering and management : proceedings 8th international conference, October 04 and 05, 2018, Lemgo, Germany (Issue 1, pp. 70–82).' bjps: 'Beyer M, Stübbe O and Villmer F-J (2018) Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications. In Villmer F-J et al. (eds), Production Engineering and Management : Proceedings 8th International Conference, October 04 and 05, 2018, Lemgo, Germany. Lemgo, pp. 70–82.' chicago: 'Beyer, Micha, Oliver Stübbe, and Franz-Josef Villmer. “Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications.” In Production Engineering and Management : Proceedings 8th International Conference, October 04 and 05, 2018, Lemgo, Germany, edited by Franz-Josef Villmer, Elio Padoano, Department of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, 70–82. Publication Series in Direct Digital Manufacturing. Lemgo, 2018.' chicago-de: 'Beyer, Micha, Oliver Stübbe und Franz-Josef Villmer. 2018. Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications. In: Production engineering and management : proceedings 8th international conference, October 04 and 05, 2018, Lemgo, Germany, hg. von Franz-Josef Villmer, Elio Padoano, Department of Production Engineering and Management, und Hochschule Ostwestfalen-Lippe, 70–82. Publication series in direct digital manufacturing. Lemgo.' din1505-2-1: 'Beyer, Micha ; Stübbe, Oliver ; Villmer, Franz-Josef: Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management ; Hochschule Ostwestfalen-Lippe (Hrsg.): Production engineering and management : proceedings 8th international conference, October 04 and 05, 2018, Lemgo, Germany, Publication series in direct digital manufacturing. Lemgo, 2018, S. 70–82' havard: 'M. Beyer, O. Stübbe, F.-J. Villmer, Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management : Proceedings 8th International Conference, October 04 and 05, 2018, Lemgo, Germany, Lemgo, 2018: pp. 70–82.' ieee: 'M. Beyer, O. Stübbe, and F.-J. Villmer, “Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications,” in Production engineering and management : proceedings 8th international conference, October 04 and 05, 2018, Lemgo, Germany, Lemgo, 2018, no. 1, pp. 70–82.' mla: 'Beyer, Micha, et al. “Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications.” Production Engineering and Management : Proceedings 8th International Conference, October 04 and 05, 2018, Lemgo, Germany, edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 70–82.' short: 'M. Beyer, O. Stübbe, F.-J. Villmer, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management : Proceedings 8th International Conference, October 04 and 05, 2018, Lemgo, Germany, Lemgo, 2018, pp. 70–82.' ufg: 'Beyer, Micha/Stübbe, Oliver/Villmer, Franz-Josef: Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications, in: Villmer, Franz-Josef u. a. (Hgg.): Production engineering and management : proceedings 8th international conference, October 04 and 05, 2018, Lemgo, Germany, Lemgo 2018 (Publication series in direct digital manufacturing),  S. 70–82.' van: 'Beyer M, Stübbe O, Villmer FJ. Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications. In: Villmer FJ, Padoano E, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, editors. Production engineering and management : proceedings 8th international conference, October 04 and 05, 2018, Lemgo, Germany. Lemgo; 2018. p. 70–82. (Publication series in direct digital manufacturing).' conference: end_date: 2018-10-05 location: Lemgo name: Proceedings 8th International Conference start_date: 2018-10-04 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-13T14:29:45Z date_updated: 2024-04-19T12:56:30Z department: - _id: DEP1306 - _id: DEP5000 - _id: DEP5020 - _id: DEP6020 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Additive manufacturing - Embedded optical waveguides - Optical sensors - SLA technology - FLM technology language: - iso: eng page: 70-82 place: Lemgo publication: 'Production engineering and management : proceedings 8th international conference, October 04 and 05, 2018, Lemgo, Germany' publication_identifier: isbn: - 978-3-946856-03-0 publication_status: published series_title: Publication series in direct digital manufacturing status: public title: Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications type: conference user_id: '51864' year: '2018' ... --- _id: '555' abstract: - lang: eng text: Although it is recommended to store goods in a warehouse based on the principle of first in first out, it is still unavoidable to use block storage of storing, for example, long andbulky goods. If the major advantage of block storage in area saving is themost important, the companyhas to accept the removal principle of last in first out or in other words, first in last out. The last goods to be stocked are the first goods to be removed and the first stocked goods are the last to be removed. There are some special observations in the block storage concerned in this paper. The first one is that the goods in the storage ordered by the customers can often not be removed directly from the storage without any stock movement. Theaim is to not only benefit fromthe high-density storage solution but also decrease the negative influence of block storage, especially when pre-stocked goods must be removed at first. The second observation is that during one concerned time period, forexample, one day, there may be several operations of put-away and several operations of order picking for shipment preparation. The third observation is that before goods are put away to storage, which goods to be removed are not always predictable. The preplanned removal dates are quite often unexpected changed. In this paper, scenarios with different dynamic properties and stochastic probabilities have been concerned and defined. Strategies for the three main stages of put-away, i.e. stacking, pre-marshalingand retrieval are defined and examined developed. Simulations have been conducted to examine the strategies based on different scenarios. The aimis to select the right strategy which may reduce the overall relocation operations. It is expected that the sum of blocks movement during put-away i.e. stacking, pre-marshaling, and block retrieval is optimally minimized. author: - first_name: Li full_name: Li, Li id: '58482' last_name: Li citation: ama: 'Li L. Put-Away and Retrieval Optimization Strategies towards Reduction of Blocks Relocations in a Block Storage. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Lemgo; 2018:101-112.' apa: Li, L. (2018). Put-Away and Retrieval Optimization Strategies towards Reduction of Blocks Relocations in a Block Storage. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.) (pp. 101–112). Presented at the Proceedings 8th International Conference, Lemgo. bjps: Li L (2018) Put-Away and Retrieval Optimization Strategies towards Reduction of Blocks Relocations in a Block Storage. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds). Lemgo, pp. 101–112. chicago: Li, Li. “Put-Away and Retrieval Optimization Strategies towards Reduction of Blocks Relocations in a Block Storage.” edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 101–12. Lemgo, 2018. chicago-de: 'Li, Li. 2018. Put-Away and Retrieval Optimization Strategies towards Reduction of Blocks Relocations in a Block Storage. In: , hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 101–112. Lemgo.' din1505-2-1: 'Li, Li: Put-Away and Retrieval Optimization Strategies towards Reduction of Blocks Relocations in a Block Storage. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): . Lemgo, 2018, S. 101–112' havard: 'L. Li, Put-Away and Retrieval Optimization Strategies towards Reduction of Blocks Relocations in a Block Storage, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Lemgo, 2018: pp. 101–112.' ieee: L. Li, “Put-Away and Retrieval Optimization Strategies towards Reduction of Blocks Relocations in a Block Storage,” presented at the Proceedings 8th International Conference, Lemgo, 2018, no. 1, pp. 101–112. mla: Li, Li. Put-Away and Retrieval Optimization Strategies towards Reduction of Blocks Relocations in a Block Storage. Edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 101–12. short: 'L. Li, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Lemgo, 2018, pp. 101–112.' ufg: 'Li, Li (2018): Put-Away and Retrieval Optimization Strategies towards Reduction of Blocks Relocations in a Block Storage, in: Franz-Josef Villmer et. al. (Hgg.): , Lemgo, S. 101–112.' van: 'Li L. Put-Away and Retrieval Optimization Strategies towards Reduction of Blocks Relocations in a Block Storage. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Lemgo; 2018. p. 101–12.' conference: end_date: 2019-10-05 location: Lemgo name: Proceedings 8th International Conference start_date: 2019-10-04 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-13T15:12:26Z date_updated: 2023-03-15T13:50:00Z department: - _id: DEP7000 - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Block storage - Put-away - Blocks relocation - Block retrieval - Order picking - First in last out - First in first out - Pre-marshalling language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf oa: '1' page: 101-112 place: Lemgo publication_identifier: isbn: - 978-3-946856-03-0 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf status: public title: Put-Away and Retrieval Optimization Strategies towards Reduction of Blocks Relocations in a Block Storage type: conference user_id: '45673' year: 2018 ... --- _id: '557' abstract: - lang: eng text: Current processes for designing manual assembly workstations do not consider the need for employee-appropriate, product-specific and operating resources-specific factors. A systematic design tool would help to minimize cycle times, increase productivity and improve ergonomic criteria. Therefore, a literature research concerning workplace design for manual assembly was conducted. Additionally, a guided Interview and a questionnaire were developed and approached on the trade show “Motek” with 14 participants.The study shows evidence for the assumption that there is no systematic approach todesigning manual assembly workstations. author: - first_name: Henning full_name: Gote, Henning id: '64558' last_name: Gote - first_name: Thomas full_name: Glatzel, Thomas id: '64888' last_name: Glatzel citation: ama: 'Gote H, Glatzel T. Empirical Study of Workplace Design of Manual Assembly Workstations in SME. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2018:137-148.' apa: Gote, H., & Glatzel, T. (2018). Empirical Study of Workplace Design of Manual Assembly Workstations in SME. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 137–148). Lemgo. bjps: Gote H and Glatzel T (2018) Empirical Study of Workplace Design of Manual Assembly Workstations in SME. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 137–148. chicago: Gote, Henning, and Thomas Glatzel. “Empirical Study of Workplace Design of Manual Assembly Workstations in SME.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 137–48. Lemgo, 2018. chicago-de: 'Gote, Henning und Thomas Glatzel. 2018. Empirical Study of Workplace Design of Manual Assembly Workstations in SME. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 137–148. Lemgo.' din1505-2-1: 'Gote, Henning ; Glatzel, Thomas: Empirical Study of Workplace Design of Manual Assembly Workstations in SME. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2018, S. 137–148' havard: 'H. Gote, T. Glatzel, Empirical Study of Workplace Design of Manual Assembly Workstations in SME, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp. 137–148.' ieee: H. Gote and T. Glatzel, “Empirical Study of Workplace Design of Manual Assembly Workstations in SME,” in Production Engineering and Management, Lemgo, 2018, no. 1, pp. 137–148. mla: Gote, Henning, and Thomas Glatzel. “Empirical Study of Workplace Design of Manual Assembly Workstations in SME.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 137–48. short: 'H. Gote, T. Glatzel, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018, pp. 137–148.' ufg: 'Gote, Henning/Glatzel, Thomas (2018): Empirical Study of Workplace Design of Manual Assembly Workstations in SME, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 137–148.' van: 'Gote H, Glatzel T. Empirical Study of Workplace Design of Manual Assembly Workstations in SME. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2018. p. 137–48.' conference: end_date: 2018-10-05 location: Lemgo name: Proceedings 8th International Conference start_date: 2018-10-04 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-13T15:28:52Z date_updated: 2023-03-15T13:50:00Z department: - _id: DEP7020 - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Manual assembly - Workplace design - Ergonomic workstations - SME language: - iso: eng page: 137-148 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-946856-03-0 publication_status: published status: public title: Empirical Study of Workplace Design of Manual Assembly Workstations in SME type: conference user_id: '74004' year: 2018 ... --- _id: '559' abstract: - lang: eng text: 'The navigation technique has been always an important issue for guiding an automated guided vehicle (AGV). With the development of sensor technology, software engineering, andalgorithms, there is a spectrum of different navigation methods for AGVs. Inorder to avoid the additional environmental installation,so as to increase the flexibility of route planning, but to keep the positioning precision, more sensors, such as light detection and ranging (LIDAR), wheel encoders and gyroscope are installed on the vehicles to be automated. Some intelligent algorithms such as simultaneous localization and mapping (SLAM) algorithms and Monte Carlo localization have been developed for the navigation of vehicles, including position and orientation. The interesting question, especially for the AGVmanufacturers, is: which algorithm is more suitable for which kind of applications. The suitabilityof an algorithm for the navigation of AGVs with facilities of Light Detection and Ranging(LIDAR), encoders and gyroscope ismainly determined by four properties. They are the positioning precision, computational costs, execution time and positioning repeatability. This paper intends to investigate the suitability of an algorithm or a navigation method for AGVs with LIDAR, wheel encoders,and gyroscope. The two aspects of positioningaccuracy and repeatability are especially concerned. A general comparison of different navigation methods and algorithms is given. An experimental platform with a basic vehicle, controlling system and sensors is then developed to further evaluate the algorithms. The hardware components and software components are compatible to robot operating system (ROS). This open-source robotics middleware provides services and tools for creating robot applications. As ROS SLAM nodes, open-source SLAM algorithms can be evaluated relatively easily without any rewriting or modification of the algorithms. As a new research field, there is not jet a SLAM algorithm, which is predominant absolutely.' author: - first_name: Li full_name: Li, Li id: '58482' last_name: Li - first_name: L. full_name: Schulze, L. last_name: Schulze citation: ama: 'Li L, Schulze L. Comparison and Evaluation of SLAM Algorithms for AGV Navigation. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2018:213-223.' apa: Li, L., & Schulze, L. (2018). Comparison and Evaluation of SLAM Algorithms for AGV Navigation. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 213–223). Lemgo. bjps: Li L and Schulze L (2018) Comparison and Evaluation of SLAM Algorithms for AGV Navigation. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 213–223. chicago: Li, Li, and L. Schulze. “Comparison and Evaluation of SLAM Algorithms for AGV Navigation.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 213–23. Lemgo, 2018. chicago-de: 'Li, Li und L. Schulze. 2018. Comparison and Evaluation of SLAM Algorithms for AGV Navigation. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 213–223. Lemgo.' din1505-2-1: 'Li, Li ; Schulze, L.: Comparison and Evaluation of SLAM Algorithms for AGV Navigation. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2018, S. 213–223' havard: 'L. Li, L. Schulze, Comparison and Evaluation of SLAM Algorithms for AGV Navigation, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp. 213–223.' ieee: L. Li and L. Schulze, “Comparison and Evaluation of SLAM Algorithms for AGV Navigation,” in Production Engineering and Management, Lemgo, 2018, no. 1, pp. 213–223. mla: Li, Li, and L. Schulze. “Comparison and Evaluation of SLAM Algorithms for AGV Navigation.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 213–23. short: 'L. Li, L. Schulze, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018, pp. 213–223.' ufg: 'Li, Li/Schulze, L. (2018): Comparison and Evaluation of SLAM Algorithms for AGV Navigation, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 213–223.' van: 'Li L, Schulze L. Comparison and Evaluation of SLAM Algorithms for AGV Navigation. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2018. p. 213–23.' conference: end_date: 2018-10-05 location: Lemgo name: Proceedings 8th International Conference start_date: 2018-10-04 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-13T15:56:30Z date_updated: 2023-03-15T13:50:00Z department: - _id: DEP7000 - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Automatedguided vehicle - Simultaneous localization and mapping - Robot operating system - Light detection and ranging language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf oa: '1' page: 213-223 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-946856-03-0 publication_status: published status: public title: Comparison and Evaluation of SLAM Algorithms for AGV Navigation type: conference user_id: '45673' year: 2018 ... --- _id: '560' abstract: - lang: eng text: In warehouse planning and dimensioning, many parameters and conditions have to be met and goals must be fulfilled, e.g. labor and investment costs, desired throughput and capacity, available material handling technologies and size constraints. These factors determine the ultimate choice of a particular alternative from a wide range of solution alternatives.On the one hand, the warehouse planning process is very complex and takes into account all different aspects of decision-making. On the other hand, it is expected that the planning period is shorter and shorter. To balance out the competing interests of accuracy and time, it is a promising approach to make use of computer-based planning tools. They can be used to find the most cost-efficientalternative and to visualize its layout.In addition, at the end of the planning process not only technologies and layout dimensions are specified, the warehouse layout with the rack configuration, the conveyors and the buildings should be visualized in three dimensions.It is a promising approach to integrate the detailed layout drawing through computer-aideddesign tools such as AutoCAD Inventor into warehouse planning process. Softwareis developed for detailed warehouse planning. The core modules of the software can generate a favorable warehouse alternative and an AutoCAD-Add-On for the visualization of the outcomes.With the planning tool,the planning period can be significantly shortened while simultaneously the planning quality, especially during the period of rough planning, increases.To balance out the competing interests of accuracy and time, it is a promising approach to make use ofcomputer-basedplanning tools. They can be used to find the most cost-efficientalternative and to visualize its layout. author: - first_name: L. full_name: Schulze, L. last_name: Schulze - first_name: Li full_name: Li, Li id: '58482' last_name: Li citation: ama: 'Schulze L, Li L. Digitized Planning with Visualization for Warehouse Layouts. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2018:233-242.' apa: Schulze, L., & Li, L. (2018). Digitized Planning with Visualization for Warehouse Layouts. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 233–242). Lemgo. bjps: Schulze L and Li L (2018) Digitized Planning with Visualization for Warehouse Layouts. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 233–242. chicago: Schulze, L., and Li Li. “Digitized Planning with Visualization for Warehouse Layouts.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 233–42. Lemgo, 2018. chicago-de: 'Schulze, L. und Li Li. 2018. Digitized Planning with Visualization for Warehouse Layouts. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 233–242. Lemgo.' din1505-2-1: 'Schulze, L. ; Li, Li: Digitized Planning with Visualization for Warehouse Layouts. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2018, S. 233–242' havard: 'L. Schulze, L. Li, Digitized Planning with Visualization for Warehouse Layouts, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp. 233–242.' ieee: L. Schulze and L. Li, “Digitized Planning with Visualization for Warehouse Layouts,” in Production Engineering and Management, Lemgo, 2018, no. 1, pp. 233–242. mla: Schulze, L., and Li Li. “Digitized Planning with Visualization for Warehouse Layouts.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 233–42. short: 'L. Schulze, L. Li, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018, pp. 233–242.' ufg: 'Schulze, L./Li, Li (2018): Digitized Planning with Visualization for Warehouse Layouts, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 233–242.' van: 'Schulze L, Li L. Digitized Planning with Visualization for Warehouse Layouts. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2018. p. 233–42.' conference: end_date: 2018-10-05 location: Lemgo name: Proceedings 8th International Conference start_date: 2018-10-04 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-13T16:05:34Z date_updated: 2023-03-15T13:50:00Z department: - _id: DEP7000 - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Warehouse planning - Layout configuration - Labor and investment costs language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf oa: '1' page: 233-242 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-946856-03-0 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf status: public title: Digitized Planning with Visualization for Warehouse Layouts type: conference user_id: '45673' year: 2018 ... --- _id: '305' abstract: - lang: eng text: "It is our pleasure to introduce the 8th edition of the International Conference on Production Engineering and anagement (PEM), an event that is the result of the joint effort of the OWL University of Applied Sciences and the University of Trieste. The conference has been established as an annual meeting under the Double Degree Master Program “Production Engineering and Management” by the two partner universities. This year the conference is hosted at the university campus in Lemgo, Germany. \r\n\r\nThe main goal of the conference is to offer students, researchers and professionals in Germany, Italy and abroad, an opportunity to meet and exchange information, discuss experiences, specific practices and technical solutions for planning, design, and management of manufacturing and service systems and processes. As always, the conference is a platform aimed at presenting research projects, introducing young academics to the tradition of symposiums and promoting the exchange of ideas between the industry and the academy. \r\n\r\nThis year’s special focus is on Supply Chain Design and Management in the context of Industry 4.0, which are currently major topics of discussion among experts and professionals. In fact, the features and problems of Industry 4.0 have been widely discussed in the last editions of the PEM conference, in which sustainability and efficiency also emerged as key factors. With the further study and development of Direct Digital Manufacturing \r\ntechnologies in connection with new Management Practices and Supply Chain Designs, the 8th edition of the PEM conference aims to offer new and interesting scientific contributions.\r\n\r\nThe conference program includes 25 speeches organized in seven sessions. Two are specifically dedicated to “Direct Digital Manufacturing in the context of Industry 4.0”. The other sessions are covering areas of great interest and importance to the participants of the conference, which are related to the main focus: “Supply Chai n Design and Management”, “Industrial Engineering and Lean Management”, “Wood Processing Technologies and Furniture Production”, and “Management Practices and Methodologies”. The proceedings of the conference include the articles submitted and accepted after a careful double-blind refereeing process." citation: ama: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2018:306. apa: Villmer, F.-J., Padoano, E., & Department of Production Engineering and Management (Eds.). (2018). Production Engineering and Management (p. 306). Presented at the 8th International Conference, Lemgo. bjps: Villmer F-J, Padoano E and Department of Production Engineering and Management (eds) (2018) Production Engineering and Management. Lemgo. chicago: Villmer, Franz-Josef, Elio Padoano, and Department of Production Engineering and Management, eds. Production Engineering and Management. Schriftenreihe Logistik. Lemgo, 2018. chicago-de: Villmer, Franz-Josef, Elio Padoano und Department of Production Engineering and Management, Hrsg. 2018. Production Engineering and Management. Schriftenreihe Logistik. Lemgo. din1505-2-1: 'Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management, Schriftenreihe Logistik. Lemgo, 2018' havard: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, eds., Production Engineering and Management, Lemgo, 2018. ieee: F.-J. Villmer, E. Padoano, and Department of Production Engineering and Management, Eds., Production Engineering and Management, no. . Lemgo, 2018, p. 306. mla: Villmer, Franz-Josef, et al., editors. Production Engineering and Management. no. ., 2018, p. 306. short: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, eds., Production Engineering and Management, Lemgo, 2018. ufg: 'Villmer, Franz-Josef et. al. (Hgg.) (2018): Production Engineering and Management (=Schriftenreihe Logistik), Lemgo.' van: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2018. (Schriftenreihe Logistik). conference: end_date: 2018-10-05 location: Lemgo name: 8th International Conference start_date: 2018-10-04 corporate_editor: - ' Department of Production Engineering and Management' - Hochschule Ostwestfalen-Lippe date_created: 2018-12-04T15:44:29Z date_updated: 2023-03-15T13:49:44Z ddc: - '650' department: - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano file: - access_level: open_access content_type: application/pdf creator: hka-zn8 date_created: 2018-12-04T15:35:27Z date_updated: 2018-12-04T15:35:27Z file_id: '306' file_name: PEM2018_proceedings_web.pdf file_size: 11343767 relation: main_file success: 1 file_date_updated: 2018-12-04T15:35:27Z has_accepted_license: '1' issue: . language: - iso: eng oa: '1' page: '306' place: Lemgo publication_identifier: isbn: - 978-3-946856-03-0 publication_status: published series_title: Schriftenreihe Logistik status: public title: Production Engineering and Management type: conference_editor user_id: '68554' year: 2018 ... --- _id: '12798' abstract: - lang: eng text: "The digitization of the industry requires smart products and services. Smart products are mechatronic products with an increasing amount of software. To get high quality smart products to the market quickly, manufacturers need to reshape their product lifecycle processes. They need to apply system engineering-based methods to enable smooth cross-domain developments with a special focus on the software domain. One significant challenge faced by manufacturers is the harmonization of product lifecycle management (PLM), which addresses the hardware lifecycle, with application lifecycle management (ALM), which addresses the software lifecycle.\r\n\r\nTo support manufacturers in this challenging activity, this paper demonstrates a proven process for developing use cases and requirements associated with a PLM/ALM integration. This process has been elicited during an industrial case study in a manufacturing company. This paper explains this process in detail. A generally applicable approach for developing the requirements of a PLM/ALM integration is extracted by removing the company-specific factors. " author: - first_name: Andreas full_name: Deuter, Andreas id: '62088' last_name: Deuter orcid: 0000-0002-6529-6215 - first_name: Andreas full_name: Otte, Andreas id: '51466' last_name: Otte - first_name: Marcel full_name: Ebert, Marcel last_name: Ebert - first_name: Frank full_name: Possel-Dölken, Frank last_name: Possel-Dölken citation: ama: 'Deuter A, Otte A, Ebert M, Possel-Dölken F. Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study. Vol 24. (Denkena B, Thoben KD, Trachtler A, eds.). Elsevier BV; 2018:107-113. doi:10.1016/j.promfg.2018.06.020' apa: 'Deuter, A., Otte, A., Ebert, M., & Possel-Dölken, F. (2018). Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study. In B. Denkena, K. D. Thoben, & A. Trachtler (Eds.), 4th International Conference on System-Integrated Intelligence - Intelligent, Flexible and Connected Systems in Products and Production (Vol. 24, pp. 107–113). Elsevier BV. https://doi.org/10.1016/j.promfg.2018.06.020' bjps: 'Deuter A et al. (2018) Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study, Denkena B, Thoben KD and Trachtler A (eds). Amsterdam [u.a.]: Elsevier BV.' chicago: 'Deuter, Andreas, Andreas Otte, Marcel Ebert, and Frank Possel-Dölken. Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study. Edited by B. Denkena, K. D. Thoben, and A. Trachtler. 4th International Conference on System-Integrated Intelligence - Intelligent, Flexible and Connected Systems in Products and Production. Vol. 24. Procedia Manufacturing. Amsterdam [u.a.]: Elsevier BV, 2018. https://doi.org/10.1016/j.promfg.2018.06.020.' chicago-de: 'Deuter, Andreas, Andreas Otte, Marcel Ebert und Frank Possel-Dölken. 2018. Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study. Hg. von B. Denkena, K. D. Thoben, und A. Trachtler. 4th International Conference on System-Integrated Intelligence - Intelligent, Flexible and Connected Systems in Products and Production. Bd. 24. Procedia Manufacturing. Amsterdam [u.a.]: Elsevier BV. doi:10.1016/j.promfg.2018.06.020, .' din1505-2-1: 'Deuter, Andreas ; Otte, Andreas ; Ebert, Marcel ; Possel-Dölken, Frank ; Denkena, B. ; Thoben, K. D. ; Trachtler, A. (Hrsg.): Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study, Procedia Manufacturing. Bd. 24. Amsterdam [u.a.] : Elsevier BV, 2018' havard: 'A. Deuter, A. Otte, M. Ebert, F. Possel-Dölken, Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study, Elsevier BV, Amsterdam [u.a.], 2018.' ieee: 'A. Deuter, A. Otte, M. Ebert, and F. Possel-Dölken, Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study, vol. 24. Amsterdam [u.a.]: Elsevier BV, 2018, pp. 107–113. doi: 10.1016/j.promfg.2018.06.020.' mla: 'Deuter, Andreas, et al. “Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study.” 4th International Conference on System-Integrated Intelligence - Intelligent, Flexible and Connected Systems in Products and Production, edited by B. Denkena et al., vol. 24, Elsevier BV, 2018, pp. 107–13, https://doi.org/10.1016/j.promfg.2018.06.020.' short: 'A. Deuter, A. Otte, M. Ebert, F. Possel-Dölken, Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study, Elsevier BV, Amsterdam [u.a.], 2018.' ufg: 'Deuter, Andreas u. a.: Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study, Bd. 24, hg. von Denkena, B./Thoben, K.D./Trachtler, A., Amsterdam [u.a.] 2018 (Procedia Manufacturing).' van: 'Deuter A, Otte A, Ebert M, Possel-Dölken F. Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study. Denkena B, Thoben KD, Trachtler A, editors. 4th International Conference on System-Integrated Intelligence - Intelligent, Flexible and Connected Systems in Products and Production. Amsterdam [u.a.]: Elsevier BV; 2018. (Procedia Manufacturing; vol. 24).' conference: end_date: 20218-06-20 location: Hannover name: 4th International Conference on System-Integrated Intelligence - Intelligent, Flexible and Connected Systems in Products and Production start_date: 2018-06-19 date_created: 2025-04-15T12:50:25Z date_updated: 2025-06-26T13:39:42Z department: - _id: DEP7022 - _id: DEP1306 doi: 10.1016/j.promfg.2018.06.020 editor: - first_name: B. full_name: Denkena, B. last_name: Denkena - first_name: 'K. D. ' full_name: 'Thoben, K. D. ' last_name: Thoben - first_name: A. full_name: Trachtler, A. last_name: Trachtler intvolume: ' 24' keyword: - Product lifecycle management - Application Lifecycle Management - Smart products - Systems engineering language: - iso: eng page: 107-113 place: Amsterdam [u.a.] publication: 4th International Conference on System-Integrated Intelligence - Intelligent, Flexible and Connected Systems in Products and Production publication_identifier: issn: - 2351-9789 publication_status: published publisher: Elsevier BV series_title: Procedia Manufacturing status: public title: 'Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study' type: conference_editor_article user_id: '83781' volume: 24 year: '2018' ... --- _id: '570' abstract: - lang: eng text: Additive manufacturing (AM) has matured rapidly during the last years due to the advancement of AM machines and materials. Nevertheless, the widespread adoption of AM is still challenged by producing parts with reliable quality. The aim of this paper is t o introduce a first approach to apply in-situ monitoring for quality evaluation of produced parts. Based on the monitored data, a model is developed, in order to predict the quality of ready built parts. author: - first_name: Eva full_name: Scheideler, Eva id: '61522' last_name: Scheideler - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: 'Scheideler E, Huxol A, Villmer F-J. Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineeringand Management. Publication series in direct digital manufacturing . Lemgo; 2017:89-100.' apa: Scheideler, E., Huxol, A., & Villmer, F.-J. (2017). Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineeringand Management (pp. 89–100). Lemgo. bjps: Scheideler E, Huxol A and Villmer F-J (2017) Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineeringand Management. Lemgo, pp. 89–100. chicago: Scheideler, Eva, Andrea Huxol, and Franz-Josef Villmer. “Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models.” In Production Engineeringand Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 89–100. Publication Series in Direct Digital Manufacturing . Lemgo, 2017. chicago-de: 'Scheideler, Eva, Andrea Huxol und Franz-Josef Villmer. 2017. Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In: Production Engineeringand Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 89–100. Publication series in direct digital manufacturing . Lemgo.' din1505-2-1: 'Scheideler, Eva ; Huxol, Andrea ; Villmer, Franz-Josef: Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineeringand Management, Publication series in direct digital manufacturing . Lemgo, 2017, S. 89–100' havard: 'E. Scheideler, A. Huxol, F.-J. Villmer, Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineeringand Management, Lemgo, 2017: pp. 89–100.' ieee: E. Scheideler, A. Huxol, and F.-J. Villmer, “Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models,” in Production Engineeringand Management, Pordenone, Italy, 2017, no. 1, pp. 89–100. mla: Scheideler, Eva, et al. “Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models.” Production Engineeringand Management, edited by Elio Padoano et al., no. 1, 2017, pp. 89–100. short: 'E. Scheideler, A. Huxol, F.-J. Villmer, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineeringand Management, Lemgo, 2017, pp. 89–100.' ufg: 'Scheideler, Eva et. al. (2017): Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models, in: Elio Padoano et. al. (Hgg.): Production Engineeringand Management (=Publication series in direct digital manufacturing ), Lemgo, S. 89–100.' van: 'Scheideler E, Huxol A, Villmer F-J. Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineeringand Management. Lemgo; 2017. p. 89–100. (Publication series in direct digital manufacturing ).' conference: end_date: 2017-09-29 location: Pordenone, Italy name: Proceedings7th International Conference start_date: 2017-09-28 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T09:46:43Z date_updated: 2023-03-15T13:50:01Z department: - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer issue: '1' keyword: - Nondestructive quality control - Predictive analytics - Metal model - Additive manufacturing language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf oa: '1' page: 89-100 place: Lemgo publication: Production Engineeringand Management publication_identifier: isbn: - 978-3-946856-01-6 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf series_title: 'Publication series in direct digital manufacturing ' status: public title: Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models type: conference user_id: '45673' year: 2017 ... --- _id: '573' abstract: - lang: eng text: Additive manufacturing (AM) technologies have not only revolutionized product development and design by enabling rapid prototyping. They also gained influence on production in general, mainly because of their direct manufacturing capabilities. In the context of Industry 4.0 and the related process automation, innovative and advanced production technologies with completely new approaches are required [1]. AM technologies contribute to this with their advantages like freedom of design, cost efficient product individualization, and functional integration. On the other hand, AM still shows shortcomings in exploiting its full potential. Most current AM technologies are only applicable for manufacturing with singular materials. In particular, opportunities for processing of optically or electrically conductive materials are still missing. This paper contributes to the advancement of additive manufacturing of two different material variants or even two completely different materials. A special focus is laid on producing a part that combines mechanical with optical or electrical functionalities in one process step. The ultimate goal is to integrate sensor functionalities into an AM object, e.g. strain gauges. Extrusion processes, predominantly Fused Layer Modeling (FLM), are preferred in this research due to their mechanically simple machine setup in which additional functional materials can be adapted easily to the build process. In a first step, the general manufacturability has been evaluated. Thereafter, the resulting optical transmission properties have been analyzed. Especially the attenuation has to remain below a threshold value to accomplish a minimum signal-to-noise ratio. author: - first_name: Patrick full_name: Ehlert, Patrick id: '62091' last_name: Ehlert - first_name: Oliver full_name: Stübbe, Oliver id: '51864' last_name: Stübbe orcid: https://orcid.org/0000-0001-7293-6893 - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: 'Ehlert P, Stübbe O, Villmer FJ. Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology. In: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management. Publication series in direct digital manufacturing . ; 2017:127-136.' apa: Ehlert, P., Stübbe, O., & Villmer, F.-J. (2017). Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology. In E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management (Issue 1, pp. 127–136). bjps: Ehlert P, Stübbe O and Villmer F-J (2017) Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology. In Padoano E et al. (eds), Production Engineering and Management. Lemgo, pp. 127–136. chicago: Ehlert, Patrick, Oliver Stübbe, and Franz-Josef Villmer. “Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, Department of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, 127–36. Publication Series in Direct Digital Manufacturing . Lemgo, 2017. chicago-de: 'Ehlert, Patrick, Oliver Stübbe und Franz-Josef Villmer. 2017. Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, Department of Production Engineering and Management, und Hochschule Ostwestfalen-Lippe, 127–136. Publication series in direct digital manufacturing . Lemgo.' din1505-2-1: 'Ehlert, Patrick ; Stübbe, Oliver ; Villmer, Franz-Josef: Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management ; Hochschule Ostwestfalen-Lippe (Hrsg.): Production Engineering and Management, Publication series in direct digital manufacturing . Lemgo, 2017, S. 127–136' havard: 'P. Ehlert, O. Stübbe, F.-J. Villmer, Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management, Lemgo, 2017: pp. 127–136.' ieee: P. Ehlert, O. Stübbe, and F.-J. Villmer, “Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology,” in Production Engineering and Management, Pordenone, Italy, 2017, no. 1, pp. 127–136. mla: Ehlert, Patrick, et al. “Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2017, pp. 127–36. short: 'P. Ehlert, O. Stübbe, F.-J. Villmer, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management, Lemgo, 2017, pp. 127–136.' ufg: 'Ehlert, Patrick/Stübbe, Oliver/Villmer, Franz-Josef: Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology, in: Padoano, Elio u. a. (Hgg.): Production Engineering and Management, Lemgo 2017 (Publication series in direct digital manufacturing ),  S. 127–136.' van: 'Ehlert P, Stübbe O, Villmer FJ. Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology. In: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, editors. Production Engineering and Management. Lemgo; 2017. p. 127–36. (Publication series in direct digital manufacturing ).' conference: end_date: 2017-09-29 location: Pordenone, Italy name: Proceedings7th International Conference start_date: 2017-09-28 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T11:16:07Z date_updated: 2024-04-19T12:58:56Z department: - _id: DEP1306 - _id: DEP5020 - _id: DEP5000 - _id: DEP6020 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer extern: '1' issue: '1' keyword: - Additive manufacturing - Embedded optical waveguides - Electrical conductors - Embedded systems - FLM technology - Sensors language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf oa: '1' page: 127-136 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-946856-01-6 publication_status: published quality_controlled: '1' related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf series_title: 'Publication series in direct digital manufacturing ' status: public title: Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology type: conference user_id: '51864' year: '2017' ... --- _id: '574' abstract: - lang: eng text: The increasing industrial digitization is the driver for the fast emergence of many industrial smart products. To stay competitive, the manufacturing companies of these smart products need to optimize their internal lifecycleprocesses. Mainly, they have to converge the software and hardware lifecycleprocesses. However, even if this strategic necessity has been recognized, manufacturing companies struggle to develop and implement a roadmap of such convergence.Starting point for the realization of harmonized lifecycle processes are processmodels describing process activities and the underlying data models. This research addresses the latter one and aims to create a generic lifecycle data model. The research team created and evaluated such data model referring to development artifacts such as requirements, parts or test cases and to lifecycle artifacts such as revisions, versions and baselines. The generic lifecycle management model was evaluated by a practical development of a smart product. By this, the research provides a valuable result to maintain and increase the competitiveness of manufacturing companies. author: - first_name: Andreas full_name: Deuter, Andreas id: '62088' last_name: Deuter - first_name: Andreas full_name: Otte, Andreas id: '51466' last_name: Otte - first_name: Marcel full_name: Ebert, Marcel id: '52288' last_name: Ebert citation: ama: 'Deuter A, Otte A, Ebert M. Extending the Sliced V-Model to Smart Product Development. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2017:115-125.' apa: Deuter, A., Otte, A., & Ebert, M. (2017). Extending the Sliced V-Model to Smart Product Development. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 115–125). Lemgo. bjps: Deuter A, Otte A and Ebert M (2017) Extending the Sliced V-Model to Smart Product Development. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 115–125. chicago: Deuter, Andreas, Andreas Otte, and Marcel Ebert. “Extending the Sliced V-Model to Smart Product Development.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 115–25. Lemgo, 2017. chicago-de: 'Deuter, Andreas, Andreas Otte und Marcel Ebert. 2017. Extending the Sliced V-Model to Smart Product Development. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 115–125. Lemgo.' din1505-2-1: 'Deuter, Andreas ; Otte, Andreas ; Ebert, Marcel: Extending the Sliced V-Model to Smart Product Development. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2017, S. 115–125' havard: 'A. Deuter, A. Otte, M. Ebert, Extending the Sliced V-Model to Smart Product Development, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017: pp. 115–125.' ieee: A. Deuter, A. Otte, and M. Ebert, “Extending the Sliced V-Model to Smart Product Development,” in Production Engineering and Management, Pordenone, Italy, 2017, no. 1, pp. 115–125. mla: Deuter, Andreas, et al. “Extending the Sliced V-Model to Smart Product Development.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2017, pp. 115–25. short: 'A. Deuter, A. Otte, M. Ebert, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017, pp. 115–125.' ufg: 'Deuter, Andreas et. al. (2017): Extending the Sliced V-Model to Smart Product Development, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 115–125.' van: 'Deuter A, Otte A, Ebert M. Extending the Sliced V-Model to Smart Product Development. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2017. p. 115–25.' conference: end_date: 2017-09-29 location: Pordenone, Italy name: Proceedings 7th International Conference start_date: 2017-09-28 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T11:34:36Z date_updated: 2023-03-15T13:50:01Z department: - _id: DEP1306 - _id: DEP7022 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer issue: '1' keyword: - PLM - ALM - Systems Engineering - VDI guideline 2206 language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf oa: '1' page: 115-125 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-946856-01-6 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf status: public title: Extending the Sliced V-Model to Smart Product Development type: conference user_id: '62088' year: 2017 ... --- _id: '575' abstract: - lang: eng text: Additive manufacturing technologies can provide cost and time advantages in mold making, compared to traditional approaches. Nevertheless, their applicability is not yet completely proven, especially in terms of surface finishing. The aim of this research work is to create perfect mold inserts by Selective Laser Melting (SLM) and to optimize surface quality. Therefore a process is developed to reduce the effort of surface quality optimization including a high flexibility in design. The tested process shows that simple and affordable methods can lead to usable molds with only minor restrictions in terms of appearance. Due to the initial reduction of layer thicknesses and distinct settings of laser melting parameters, the surface smoothness is significantly enhanced during the SLM building process. Subsequently blasting, manual grinding, as well as polishing operations, enable a selective smoothening of the surface up to a polished finish. As a result, the built tool parts can be used instantly for injection molding. author: - first_name: O. full_name: Elstermeyer, O. last_name: Elstermeyer - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: 'Elstermeyer O, Villmer F-J. SLM Based Tooling for Injection Molding - Focus on Reduced Effort in Surface Quality Optimization. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Publication series in direct digital manufacturing . Lemgo; 2017:101-113.' apa: Elstermeyer, O., & Villmer, F.-J. (2017). SLM Based Tooling for Injection Molding - Focus on Reduced Effort in Surface Quality Optimization. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 101–113). Lemgo. bjps: Elstermeyer O and Villmer F-J (2017) SLM Based Tooling for Injection Molding - Focus on Reduced Effort in Surface Quality Optimization. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 101–113. chicago: Elstermeyer, O., and Franz-Josef Villmer. “SLM Based Tooling for Injection Molding - Focus on Reduced Effort in Surface Quality Optimization.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 101–13. Publication Series in Direct Digital Manufacturing . Lemgo, 2017. chicago-de: 'Elstermeyer, O. und Franz-Josef Villmer. 2017. SLM Based Tooling for Injection Molding - Focus on Reduced Effort in Surface Quality Optimization. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 101–113. Publication series in direct digital manufacturing . Lemgo.' din1505-2-1: 'Elstermeyer, O. ; Villmer, Franz-Josef: SLM Based Tooling for Injection Molding - Focus on Reduced Effort in Surface Quality Optimization. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management, Publication series in direct digital manufacturing . Lemgo, 2017, S. 101–113' havard: 'O. Elstermeyer, F.-J. Villmer, SLM Based Tooling for Injection Molding - Focus on Reduced Effort in Surface Quality Optimization, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017: pp. 101–113.' ieee: O. Elstermeyer and F.-J. Villmer, “SLM Based Tooling for Injection Molding - Focus on Reduced Effort in Surface Quality Optimization,” in Production Engineering and Management, Pordenone, Italy, 2017, no. 1, pp. 101–113. mla: Elstermeyer, O., and Franz-Josef Villmer. “SLM Based Tooling for Injection Molding - Focus on Reduced Effort in Surface Quality Optimization.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2017, pp. 101–13. short: 'O. Elstermeyer, F.-J. Villmer, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017, pp. 101–113.' ufg: 'Elstermeyer, O./Villmer, Franz-Josef (2017): SLM Based Tooling for Injection Molding - Focus on Reduced Effort in Surface Quality Optimization, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management (=Publication series in direct digital manufacturing ), Lemgo, S. 101–113.' van: 'Elstermeyer O, Villmer F-J. SLM Based Tooling for Injection Molding - Focus on Reduced Effort in Surface Quality Optimization. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2017. p. 101–13. (Publication series in direct digital manufacturing ).' conference: end_date: 2017-09-29 location: Pordenone, Italy name: Proceedings7th International Conference start_date: 2017-09-28 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T11:16:07Z date_updated: 2023-03-15T13:50:01Z department: - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer issue: '1' keyword: - Tool making - Direct rapid tooling - Additively manufactured molds - Selective laser melting - Additive manufacturing process chain - Post-processing language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf oa: '1' page: 101-113 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-946856-01-6 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf series_title: 'Publication series in direct digital manufacturing ' status: public title: SLM Based Tooling for Injection Molding - Focus on Reduced Effort in Surface Quality Optimization type: conference user_id: '45673' year: 2017 ... --- _id: '576' abstract: - lang: eng text: Due to a high level of competition in automotive industry, it is essentially important for automotive companies to develop innovative strategies and technologies in production and logistics. Postponement of production difference, i.e., customer individualized demand has been considered as an innovative strategy and more or less implemented in the production process, mostly before and during the final assembly. This paper proposed the concept of postponing the individualization of some components after the assembly. The idea is to use the idle times especially during the distribution process when vehicles are accumulated to generate big transportation batches or the follow-up transport does not start immediately. The individualization is carried out in specially realized workshops. Objectives of the approach are to reduce variations in the manufacturing, to shorten delivery times and to give consumers the ability to reorder individual components shortly before delivery. This kind of postponement of individualization induces the requirement of redesigning the logistics network, which means the selection of workshop locations and the new selection of the suppliers for the individualized components. To reach this aim, a software tool has been developed. In the tool, the data required in the logistics network such as suppliers and workshop potential locations are managed in a MySQL database and the optimization of the network is achieved by the especiallydeveloped non-dominated sorting genetic algorithm-II (NSGA-II). The design and development of the solution individuals and the fitness functions, which are the most important elements of a genetic algorithm, are based on the mathematical model of the logistics network design with product late individualization. Different scenarios are considered and generated to examine the applicability of the methodology in automotive practice. The optimization model and the heuristics of genetic algorithm are validated through the Pareto solutions for different scenarios. author: - first_name: Li full_name: Li, Li id: '58482' last_name: Li citation: ama: 'Li L. Optimization of Automotive Logistics Network with Late Product Individualization. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Publication series in direct digital manufacturing . Lemgo; 2017:139-150.' apa: Li, L. (2017). Optimization of Automotive Logistics Network with Late Product Individualization. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 139–150). Lemgo. bjps: Li L (2017) Optimization of Automotive Logistics Network with Late Product Individualization. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 139–150. chicago: Li, Li. “Optimization of Automotive Logistics Network with Late Product Individualization.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 139–50. Publication Series in Direct Digital Manufacturing . Lemgo, 2017. chicago-de: 'Li, Li. 2017. Optimization of Automotive Logistics Network with Late Product Individualization. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 139–150. Publication series in direct digital manufacturing . Lemgo.' din1505-2-1: 'Li, Li: Optimization of Automotive Logistics Network with Late Product Individualization. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management, Publication series in direct digital manufacturing . Lemgo, 2017, S. 139–150' havard: 'L. Li, Optimization of Automotive Logistics Network with Late Product Individualization, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017: pp. 139–150.' ieee: L. Li, “Optimization of Automotive Logistics Network with Late Product Individualization,” in Production Engineering and Management, Pordenone, Italy, 2017, no. 1, pp. 139–150. mla: Li, Li. “Optimization of Automotive Logistics Network with Late Product Individualization.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2017, pp. 139–50. short: 'L. Li, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017, pp. 139–150.' ufg: 'Li, Li (2017): Optimization of Automotive Logistics Network with Late Product Individualization, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management (=Publication series in direct digital manufacturing ), Lemgo, S. 139–150.' van: 'Li L. Optimization of Automotive Logistics Network with Late Product Individualization. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2017. p. 139–50. (Publication series in direct digital manufacturing ).' conference: end_date: 2017-09-29 location: Pordenone, Italy name: Proceedings7th International Conference start_date: 2017-09-28 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T11:16:07Z date_updated: 2023-03-15T13:50:01Z department: - _id: DEP7000 - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer issue: '1' keyword: - Automotive industry - Logistics network configuration - Late product individualization - Postponement - NSGGA language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf oa: '1' page: 139-150 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-946856-01-6 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf series_title: 'Publication series in direct digital manufacturing ' status: public title: Optimization of Automotive Logistics Network with Late Product Individualization type: conference user_id: '45673' year: 2017 ... --- _id: '577' abstract: - lang: eng text: A rising number of product variants together with decreasing lot sizes are a result of the trend of individualization. Besides the upcoming organizational issues, changes in the production technologies are required. Direct digital manufacturing contributes to solve this problem by enabling the production of parts right from the CAD data.Process capability analysis is applied in several industries to prove the reliable compliance of products with quality requirements. As it is based on statistical methods, new challenges arise in the context of single-part production.The paper describes and compares different approaches for the adoption of process capability analysis for single-part production with special focus on additive manufacturing technologies. The statistical background and the applicability of different capability parameters are discussed. An overview of existing research work is given and supplemented by own approaches for the adoption of statistical methods for single-part production. The aim of the research work is to establish a first approach for the qualification of new technologies in single-part production. author: - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Andrea full_name: Davis, Andrea id: '68611' last_name: Davis - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer - first_name: Eva full_name: Scheideler, Eva id: '61522' last_name: Scheideler citation: ama: 'Huxol A, Davis A, Villmer F-J, Scheideler E. Deployment of Process Capability Analysis for Single-Part Production. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Publication series in direct digital manufacturing . Lemgo; 2017:63-74.' apa: Huxol, A., Davis, A., Villmer, F.-J., & Scheideler, E. (2017). Deployment of Process Capability Analysis for Single-Part Production. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 63–74). Lemgo. bjps: Huxol A et al. (2017) Deployment of Process Capability Analysis for Single-Part Production. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 63–74. chicago: Huxol, Andrea, Andrea Davis, Franz-Josef Villmer, and Eva Scheideler. “Deployment of Process Capability Analysis for Single-Part Production.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 63–74. Publication Series in Direct Digital Manufacturing . Lemgo, 2017. chicago-de: 'Huxol, Andrea, Andrea Davis, Franz-Josef Villmer und Eva Scheideler. 2017. Deployment of Process Capability Analysis for Single-Part Production. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 63–74. Publication series in direct digital manufacturing . Lemgo.' din1505-2-1: 'Huxol, Andrea ; Davis, Andrea ; Villmer, Franz-Josef ; Scheideler, Eva: Deployment of Process Capability Analysis for Single-Part Production. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management, Publication series in direct digital manufacturing . Lemgo, 2017, S. 63–74' havard: 'A. Huxol, A. Davis, F.-J. Villmer, E. Scheideler, Deployment of Process Capability Analysis for Single-Part Production, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017: pp. 63–74.' ieee: A. Huxol, A. Davis, F.-J. Villmer, and E. Scheideler, “Deployment of Process Capability Analysis for Single-Part Production,” in Production Engineering and Management, Pordenone, Italy, 2017, no. 1, pp. 63–74. mla: Huxol, Andrea, et al. “Deployment of Process Capability Analysis for Single-Part Production.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2017, pp. 63–74. short: 'A. Huxol, A. Davis, F.-J. Villmer, E. Scheideler, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017, pp. 63–74.' ufg: 'Huxol, Andrea et. al. (2017): Deployment of Process Capability Analysis for Single-Part Production, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management (=Publication series in direct digital manufacturing ), Lemgo, S. 63–74.' van: 'Huxol A, Davis A, Villmer F-J, Scheideler E. Deployment of Process Capability Analysis for Single-Part Production. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2017. p. 63–74. (Publication series in direct digital manufacturing ).' conference: end_date: 2017-09-29 location: Pordenone, Italy name: Proceedings7th International Conference start_date: 2017-09-28 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T11:16:07Z date_updated: 2023-03-15T13:50:01Z department: - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer issue: '1' keyword: - Statistical process control - Process capability analysis - Single-part production - Process optimization language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf oa: '1' page: 63-74 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-946856-01-6 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf series_title: 'Publication series in direct digital manufacturing ' status: public title: Deployment of Process Capability Analysis for Single-Part Production type: conference user_id: '45673' year: 2017 ... --- _id: '578' abstract: - lang: eng text: Challenges of companies are presented by an increasing number of product variants or a growing product complexity in combination with a reduction of lot size. Therefore the scope of the work in the field of manual assembly will be more complex. This situation leads to a need of assistance systems. With these systems, the assembly workers will be qualified to execute their work tasks within the requirements. This approach set up on a further implementation of an assistance system at a great device manufacturer. The main focus of this implementation was the technical and functional design of the assistance system, but a successful implementation requires also an active handling of the change process. The purpose of this paper is the presentation of design principles in form of a process model for the implementation of digital assistance systems. The development of the design principles takes place in a participative approach. Executives, work councilsand workers develop the project results together with external project members. Project managers will be able to manage implementation processes with the results and take all the success factors into account. author: - first_name: Tim full_name: Kleineberg, Tim id: '65024' last_name: Kleineberg - first_name: Matthias full_name: Eichelberg, Matthias id: '60217' last_name: Eichelberg - first_name: Sven full_name: Hinrichsen, Sven id: '49010' last_name: Hinrichsen citation: ama: 'Kleineberg T, Eichelberg M, Hinrichsen S. Participative Development of an Implementation Process for Worker Assistance Systems. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2017:25-36.' apa: Kleineberg, T., Eichelberg, M., & Hinrichsen, S. (2017). Participative Development of an Implementation Process for Worker Assistance Systems. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 25–36). Lemgo. bjps: Kleineberg T, Eichelberg M and Hinrichsen S (2017) Participative Development of an Implementation Process for Worker Assistance Systems. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 25–36. chicago: Kleineberg, Tim, Matthias Eichelberg, and Sven Hinrichsen. “Participative Development of an Implementation Process for Worker Assistance Systems.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 25–36. Lemgo, 2017. chicago-de: 'Kleineberg, Tim, Matthias Eichelberg und Sven Hinrichsen. 2017. Participative Development of an Implementation Process for Worker Assistance Systems. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 25–36. Lemgo.' din1505-2-1: 'Kleineberg, Tim ; Eichelberg, Matthias ; Hinrichsen, Sven: Participative Development of an Implementation Process for Worker Assistance Systems. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2017, S. 25–36' havard: 'T. Kleineberg, M. Eichelberg, S. Hinrichsen, Participative Development of an Implementation Process for Worker Assistance Systems, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017: pp. 25–36.' ieee: T. Kleineberg, M. Eichelberg, and S. Hinrichsen, “Participative Development of an Implementation Process for Worker Assistance Systems,” in Production Engineering and Management, Pordenone, Italy, 2017, no. 1, pp. 25–36. mla: Kleineberg, Tim, et al. “Participative Development of an Implementation Process for Worker Assistance Systems.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2017, pp. 25–36. short: 'T. Kleineberg, M. Eichelberg, S. Hinrichsen, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017, pp. 25–36.' ufg: 'Kleineberg, Tim et. al. (2017): Participative Development of an Implementation Process for Worker Assistance Systems, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 25–36.' van: 'Kleineberg T, Eichelberg M, Hinrichsen S. Participative Development of an Implementation Process for Worker Assistance Systems. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2017. p. 25–36.' conference: end_date: 2017-09-29 location: Pordenone, Italy name: Proceedings 7th International Conference start_date: 2017-09-28 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T11:34:36Z date_updated: 2023-03-15T13:50:01Z department: - _id: DEP1306 - _id: DEP7020 - _id: DEP1305 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer issue: '1' keyword: - Assistance systems - Change management - Success factors - Process model language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf oa: '1' page: 25-36 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-946856-01-6 publication_status: published quality_controlled: '1' status: public title: Participative Development of an Implementation Process for Worker Assistance Systems type: conference user_id: '49010' year: 2017 ... --- _id: '579' abstract: - lang: eng text: Selective Laser Melting (SLM) is a powder bed fusion process to produce additively metal parts. From the current point of view, it seems to be one of the most promising additive manufacturing technologies for the production of end use parts. An increasing number of examples prove the successful application of SLM for technical part production. Nevertheless, they also show the enormous effort that is still required to qualify the production process of every single part individually.The present paper gives an overview of the major influencing factors of the SLM process. To get a comprehensive research approach, existing publications on the topic are taken into account as well as own experimental work, evaluating the effects of the process parameters on the relative density of samples made from tool steel. The experimental setup and the results are described and opportunities for the further research work are discussed. author: - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Eva full_name: Scheideler, Eva id: '61522' last_name: Scheideler - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: 'Huxol A, Scheideler E, Villmer F-J. Influencing Factors on Part Quality in Selective Laser Melting. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2017:13-34.' apa: Huxol, A., Scheideler, E., & Villmer, F.-J. (2017). Influencing Factors on Part Quality in Selective Laser Melting. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 13–34). Lemgo. bjps: Huxol A, Scheideler E and Villmer F-J (2017) Influencing Factors on Part Quality in Selective Laser Melting. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 13–34. chicago: Huxol, Andrea, Eva Scheideler, and Franz-Josef Villmer. “Influencing Factors on Part Quality in Selective Laser Melting.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 13–34. Lemgo, 2017. chicago-de: 'Huxol, Andrea, Eva Scheideler und Franz-Josef Villmer. 2017. Influencing Factors on Part Quality in Selective Laser Melting. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 13–34. Lemgo.' din1505-2-1: 'Huxol, Andrea ; Scheideler, Eva ; Villmer, Franz-Josef: Influencing Factors on Part Quality in Selective Laser Melting. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2017, S. 13–34' havard: 'A. Huxol, E. Scheideler, F.-J. Villmer, Influencing Factors on Part Quality in Selective Laser Melting, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017: pp. 13–34.' ieee: A. Huxol, E. Scheideler, and F.-J. Villmer, “Influencing Factors on Part Quality in Selective Laser Melting,” in Production Engineering and Management, Pordenone, Italy, 2017, no. 1, pp. 13–34. mla: Huxol, Andrea, et al. “Influencing Factors on Part Quality in Selective Laser Melting.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2017, pp. 13–34. short: 'A. Huxol, E. Scheideler, F.-J. Villmer, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017, pp. 13–34.' ufg: 'Huxol, Andrea et. al. (2017): Influencing Factors on Part Quality in Selective Laser Melting, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 13–34.' van: 'Huxol A, Scheideler E, Villmer F-J. Influencing Factors on Part Quality in Selective Laser Melting. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2017. p. 13–34.' conference: end_date: 2017-09-29 location: Pordenone, Italy name: Proceedings 7th International Conference start_date: 2017-09-28 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T11:34:36Z date_updated: 2023-03-15T13:50:02Z department: - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer issue: '1' keyword: - Selective laser melting - Additive manufacturing - Process parameters - Process optimization language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf oa: '1' page: 13-34 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-946856-01-6 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf status: public title: Influencing Factors on Part Quality in Selective Laser Melting type: conference user_id: '45673' year: 2017 ... --- _id: '580' abstract: - lang: eng text: Additive Manufacturing (AM) is increasingly used to design new products. This is possible due to the further development of the AM-processes and materials. The lack of quality assurance of AM built parts is a key technological barrier that prevents manufacturers from adopting. The quality of an additive manufactured part is influenced by more than 50 parameters, which make process control difficult. Current research deals with using real time monitoring of the melt pool as feedback control for laser power. This paper illustrates challenges and opportunities of applying statistical predictive modeling and unsupervised learning to control additive manufacturing. In particular, an approach how to build a feedforward controller will be discussed. author: - first_name: Eva full_name: Scheideler, Eva id: '61522' last_name: Scheideler - first_name: Andrea full_name: Ahlemeyer-Stubbe, Andrea last_name: Ahlemeyer-Stubbe citation: ama: 'Scheideler E, Ahlemeyer-Stubbe A. Quality Control of Additive Manufacturing Using Statistical Prediction Models. In: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds.   Production Engineering and Management : Proceedings 7th International Conference, September 28 and 29, 2017, Pordenone, Italy . Vol 2017.   Publication series in direct digital manufacturing . ; 2017:3-12.' apa: 'Scheideler, E., & Ahlemeyer-Stubbe, A. (2017). Quality Control of Additive Manufacturing Using Statistical Prediction Models. In E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe (Eds.),   Production engineering and management : proceedings 7th international conference, September 28 and 29, 2017, Pordenone, Italy (Vol. 2017, Issue 1, pp. 3–12).' bjps: 'Scheideler E and Ahlemeyer-Stubbe A (2017) Quality Control of Additive Manufacturing Using Statistical Prediction Models. In Padoano E et al. (eds),   Production Engineering and Management : Proceedings 7th International Conference, September 28 and 29, 2017, Pordenone, Italy , vol. 2017. Lemgo, pp. 3–12.' chicago: 'Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Quality Control of Additive Manufacturing Using Statistical Prediction Models.” In   Production Engineering and Management : Proceedings 7th International Conference, September 28 and 29, 2017, Pordenone, Italy , edited by Elio Padoano, Franz-Josef Villmer, Department of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, 2017:3–12.   Publication Series in Direct Digital Manufacturing . Lemgo, 2017.' chicago-de: 'Scheideler, Eva und Andrea Ahlemeyer-Stubbe. 2017. Quality Control of Additive Manufacturing Using Statistical Prediction Models. In:   Production engineering and management : proceedings 7th international conference, September 28 and 29, 2017, Pordenone, Italy , hg. von Elio Padoano, Franz-Josef Villmer, Department of Production Engineering and Management, und Hochschule Ostwestfalen-Lippe, 2017:3–12.   Publication series in direct digital manufacturing . Lemgo.' din1505-2-1: 'Scheideler, Eva ; Ahlemeyer-Stubbe, Andrea: Quality Control of Additive Manufacturing Using Statistical Prediction Models. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management ; Hochschule Ostwestfalen-Lippe (Hrsg.):   Production engineering and management : proceedings 7th international conference, September 28 and 29, 2017, Pordenone, Italy ,   Publication series in direct digital manufacturing . Bd. 2017. Lemgo, 2017, S. 3–12' havard: 'E. Scheideler, A. Ahlemeyer-Stubbe, Quality Control of Additive Manufacturing Using Statistical Prediction Models, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.),   Production Engineering and Management : Proceedings 7th International Conference, September 28 and 29, 2017, Pordenone, Italy , Lemgo, 2017: pp. 3–12.' ieee: 'E. Scheideler and A. Ahlemeyer-Stubbe, “Quality Control of Additive Manufacturing Using Statistical Prediction Models,” in   Production engineering and management : proceedings 7th international conference, September 28 and 29, 2017, Pordenone, Italy , Pordenone, Italy, 2017, vol. 2017, no. 1, pp. 3–12.' mla: 'Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Quality Control of Additive Manufacturing Using Statistical Prediction Models.”   Production Engineering and Management : Proceedings 7th International Conference, September 28 and 29, 2017, Pordenone, Italy , edited by Elio Padoano et al., vol. 2017, no. 1, 2017, pp. 3–12.' short: 'E. Scheideler, A. Ahlemeyer-Stubbe, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.),   Production Engineering and Management : Proceedings 7th International Conference, September 28 and 29, 2017, Pordenone, Italy , Lemgo, 2017, pp. 3–12.' ufg: 'Scheideler, Eva/Ahlemeyer-Stubbe, Andrea: Quality Control of Additive Manufacturing Using Statistical Prediction Models, in: Padoano, Elio u. a. (Hgg.):   Production engineering and management : proceedings 7th international conference, September 28 and 29, 2017, Pordenone, Italy , Bd. 2017, Lemgo 2017 (  Publication series in direct digital manufacturing ),  S. 3–12.' van: 'Scheideler E, Ahlemeyer-Stubbe A. Quality Control of Additive Manufacturing Using Statistical Prediction Models. In: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, editors.   Production engineering and management : proceedings 7th international conference, September 28 and 29, 2017, Pordenone, Italy . Lemgo; 2017. p. 3–12. (  Publication series in direct digital manufacturing ; vol. 2017).' conference: end_date: 2017-09-29 location: Pordenone, Italy name: 7th International Conference on Production Engineering and Management start_date: 2017-09-28 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T11:34:36Z date_updated: 2024-03-22T13:19:02Z department: - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer intvolume: ' 2017' issue: '1' keyword: - Additive manufacturing - Process control - Predictive modeling - Predictive control language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf oa: '1' page: 3-12 place: Lemgo publication: "\t Production engineering and management : proceedings 7th international conference, September 28 and 29, 2017, Pordenone, Italy " publication_identifier: isbn: - 978-3-946856-01-6 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf series_title: "\t Publication series in direct digital manufacturing " status: public title: Quality Control of Additive Manufacturing Using Statistical Prediction Models type: conference user_id: '83781' volume: 2017 year: '2017' ... --- _id: '581' author: - first_name: Eva full_name: Scheideler, Eva id: '61522' last_name: Scheideler - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: 'Scheideler E, Villmer F-J. Anforderungen an integrierte Prozessketten in der Additiven Fertigung. In: Rapid.Tech – International Trade Show & Conference for Additive Manufacturing. München: Carl Hanser Verlag GmbH & Co. KG; 2017:10-24. doi:10.3139/9783446454606.001' apa: 'Scheideler, E., & Villmer, F.-J. (2017). Anforderungen an integrierte Prozessketten in der Additiven Fertigung. In Rapid.Tech – International Trade Show & Conference for Additive Manufacturing (pp. 10–24). München: Carl Hanser Verlag GmbH & Co. KG. https://doi.org/10.3139/9783446454606.001' bjps: 'Scheideler E and Villmer F-J (2017) Anforderungen an Integrierte Prozessketten in Der Additiven Fertigung. Rapid.Tech – International Trade Show & Conference for Additive Manufacturing. München: Carl Hanser Verlag GmbH & Co. KG, pp. 10–24.' chicago: 'Scheideler, Eva, and Franz-Josef Villmer. “Anforderungen an Integrierte Prozessketten in Der Additiven Fertigung.” In Rapid.Tech – International Trade Show & Conference for Additive Manufacturing, 10–24. München: Carl Hanser Verlag GmbH & Co. KG, 2017. https://doi.org/10.3139/9783446454606.001.' chicago-de: 'Scheideler, Eva und Franz-Josef Villmer. 2017. Anforderungen an integrierte Prozessketten in der Additiven Fertigung. In: Rapid.Tech – International Trade Show & Conference for Additive Manufacturing, 10–24. München: Carl Hanser Verlag GmbH & Co. KG. doi:10.3139/9783446454606.001, .' din1505-2-1: 'Scheideler, Eva ; Villmer, Franz-Josef: Anforderungen an integrierte Prozessketten in der Additiven Fertigung. In: Rapid.Tech – International Trade Show & Conference for Additive Manufacturing. München : Carl Hanser Verlag GmbH & Co. KG, 2017, S. 10–24' havard: 'E. Scheideler, F.-J. Villmer, Anforderungen an integrierte Prozessketten in der Additiven Fertigung, in: Rapid.Tech – International Trade Show & Conference for Additive Manufacturing, Carl Hanser Verlag GmbH & Co. KG, München, 2017: pp. 10–24.' ieee: E. Scheideler and F.-J. Villmer, “Anforderungen an integrierte Prozessketten in der Additiven Fertigung,” in Rapid.Tech – International Trade Show & Conference for Additive Manufacturing, 2017, no. 1, pp. 10–24. mla: Scheideler, Eva, and Franz-Josef Villmer. “Anforderungen an Integrierte Prozessketten in Der Additiven Fertigung.” Rapid.Tech – International Trade Show & Conference for Additive Manufacturing, no. 1, Carl Hanser Verlag GmbH & Co. KG, 2017, pp. 10–24, doi:10.3139/9783446454606.001. short: 'E. Scheideler, F.-J. Villmer, in: Rapid.Tech – International Trade Show & Conference for Additive Manufacturing, Carl Hanser Verlag GmbH & Co. KG, München, 2017, pp. 10–24.' ufg: 'Scheideler, Eva/Villmer, Franz-Josef (2017): Anforderungen an integrierte Prozessketten in der Additiven Fertigung, in: Rapid.Tech – International Trade Show & Conference for Additive Manufacturing, München, S. 10–24.' van: 'Scheideler E, Villmer F-J. Anforderungen an integrierte Prozessketten in der Additiven Fertigung. In: RapidTech – International Trade Show & Conference for Additive Manufacturing. München: Carl Hanser Verlag GmbH & Co. KG; 2017. p. 10–24.' date_created: 2019-02-18T13:02:40Z date_updated: 2023-03-15T13:50:02Z department: - _id: DEP1306 doi: 10.3139/9783446454606.001 issue: '1' language: - iso: eng main_file_link: - url: https://www.hanser-elibrary.com/doi/pdf/10.3139/9783446454606.001 page: 10-24 place: München publication: Rapid.Tech – International Trade Show & Conference for Additive Manufacturing publication_identifier: isbn: - 978-3-44645459-0 - 978-3-44645460-6 publication_status: published publisher: Carl Hanser Verlag GmbH & Co. KG related_material: link: - relation: contains url: https://www.hanser-elibrary.com/doi/pdf/10.3139/9783446454606.001 - relation: supplementary_material url: https://www.hs-owl.de/fb7/fileadmin/download/labore/konstruktion/06_Tagungen/01_RP_Tagungen/22_RP/Scheideler_DiMan.pdf status: public title: Anforderungen an integrierte Prozessketten in der Additiven Fertigung type: conference user_id: '45673' year: 2017 ... --- _id: '609' abstract: - lang: ger text: Einfach, ohne Expertenwissen anzuwenden – solch ein Planungswerkzeug spart Zeit und Geld. Dieser Artikel stellt eine neue, effiziente Berechnungsmöglichkeit vor, die z.B. Vertriebsmitarbeiter oder Architekten befähigt, Risiken bezüglich Durch‐ oder Absturzsicherheit bei allseitig gelagerten Verglasungen früh in der Planung schnell abzuprüfen. Dabei werden statistische Modelle und Simulationsberechnungen eingesetzt. Verifiziert wurde die Methode gemäß DIN 18008 Teil 4 und Teil 6 mit den Möglichkeiten der Finite‐Element‐Rechnung und Referenzdatensätzen. Sie kann eine finale statische Beurteilung (z.B. prüffähige Statik) nicht ersetzen, doch sie kann im Lauf der Planung verlässliche Abschätzungen liefern und somit Geld und Zeit einsparen. author: - first_name: Eva full_name: Scheideler, Eva id: '61522' last_name: Scheideler - first_name: Andrea full_name: Ahlemeyer-Stubbe, Andrea last_name: Ahlemeyer-Stubbe - first_name: Josef full_name: Scheideler, Josef last_name: Scheideler citation: ama: 'Scheideler E, Ahlemeyer-Stubbe A, Scheideler J. Statistische Modellierung zur Unterstützung von Industrie 4.0 im Glasbau. ce/papers : Proceedings in Civil Engineering. 2017;1(1):142-152. doi:10.1002/cepa.16' apa: 'Scheideler, E., Ahlemeyer-Stubbe, A., & Scheideler, J. (2017). Statistische Modellierung zur Unterstützung von Industrie 4.0 im Glasbau. ce/papers : Proceedings in Civil Engineering, 1(1), 142–152. https://doi.org/10.1002/cepa.16' bjps: 'Scheideler E, Ahlemeyer-Stubbe A and Scheideler J (2017) Statistische Modellierung zur Unterstützung von Industrie 4.0 im Glasbau. ce/papers : Proceedings in Civil Engineering 1, 142–152.' chicago: 'Scheideler, Eva, Andrea Ahlemeyer-Stubbe, and Josef Scheideler. “Statistische Modellierung zur Unterstützung von Industrie 4.0 im Glasbau.” ce/papers : Proceedings in Civil Engineering 1, no. 1 (2017): 142–52. https://doi.org/10.1002/cepa.16.' chicago-de: 'Scheideler, Eva, Andrea Ahlemeyer-Stubbe und Josef Scheideler. 2017. Statistische Modellierung zur Unterstützung von Industrie 4.0 im Glasbau. ce/papers : Proceedings in Civil Engineering 1, Nr. 1: 142–152. doi:10.1002/cepa.16, .' din1505-2-1: 'Scheideler, Eva ; Ahlemeyer-Stubbe, Andrea ; Scheideler, Josef: Statistische Modellierung zur Unterstützung von Industrie 4.0 im Glasbau. In: ce/papers : Proceedings in Civil Engineering Bd. 1, Ernst & Sohn, a Wiley brand (2017), Nr. 1, S. 142–152' havard: 'E. Scheideler, A. Ahlemeyer-Stubbe, J. Scheideler, Statistische Modellierung zur Unterstützung von Industrie 4.0 im Glasbau, ce/papers : Proceedings in Civil Engineering. 1 (2017) 142–152.' ieee: 'E. Scheideler, A. Ahlemeyer-Stubbe, and J. Scheideler, “Statistische Modellierung zur Unterstützung von Industrie 4.0 im Glasbau,” ce/papers : Proceedings in Civil Engineering, vol. 1, no. 1, pp. 142–152, 2017, doi: 10.1002/cepa.16.' mla: 'Scheideler, Eva, et al. “Statistische Modellierung zur Unterstützung von Industrie 4.0 im Glasbau.” ce/papers : Proceedings in Civil Engineering, vol. 1, no. 1, 2017, pp. 142–52, https://doi.org/10.1002/cepa.16.' short: 'E. Scheideler, A. Ahlemeyer-Stubbe, J. Scheideler, ce/papers : Proceedings in Civil Engineering 1 (2017) 142–152.' ufg: 'Scheideler, Eva/Ahlemeyer-Stubbe, Andrea/Scheideler, Josef: Statistische Modellierung zur Unterstützung von Industrie 4.0 im Glasbau, in: ce/papers : Proceedings in Civil Engineering 1 (2017), H. 1,  S. 142–152.' van: 'Scheideler E, Ahlemeyer-Stubbe A, Scheideler J. Statistische Modellierung zur Unterstützung von Industrie 4.0 im Glasbau. ce/papers : Proceedings in Civil Engineering. 2017;1(1):142–52.' date_created: 2019-02-21T16:16:43Z date_updated: 2024-03-22T13:09:48Z department: - _id: DEP1306 doi: 10.1002/cepa.16 intvolume: ' 1' issue: '1' language: - iso: ger page: 142-152 publication: 'ce/papers : Proceedings in Civil Engineering' publication_identifier: eissn: - 2509-7075 publication_status: published publisher: 'Ernst & Sohn, a Wiley brand ' status: public title: Statistische Modellierung zur Unterstützung von Industrie 4.0 im Glasbau type: journal_article user_id: '83781' volume: 1 year: '2017' ... --- _id: '610' author: - first_name: Andreas full_name: Deuter, Andreas id: '62088' last_name: Deuter - first_name: Andreas full_name: Otte, Andreas id: '51466' last_name: Otte - first_name: Daniel full_name: Höllisch, Daniel last_name: Höllisch citation: ama: 'Deuter A, Otte A, Höllisch D. Methodisches Vorgehen zur Entwicklung und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration. In: Trächtler A, Heinz Nixdorf Institut, eds. Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017. Vol 369. Verlagsschriftenreihe des Heinz Nixdorf Instituts. Paderborn; 2017:211-222.' apa: Deuter, A., Otte, A., & Höllisch, D. (2017). Methodisches Vorgehen zur Entwicklung und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration. In A. Trächtler & Heinz Nixdorf Institut (Eds.), Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017 (Vol. 369, pp. 211–222). Paderborn. bjps: Deuter A, Otte A and Höllisch D (2017) Methodisches Vorgehen zur Entwicklung und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration. In Trächtler A and Heinz Nixdorf Institut (eds), Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017, vol. 369. Paderborn, pp. 211–222. chicago: Deuter, Andreas, Andreas Otte, and Daniel Höllisch. “Methodisches Vorgehen zur Entwicklung und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration.” In Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017, edited by Ansgar Trächtler and Heinz Nixdorf Institut, 369:211–22. Verlagsschriftenreihe des Heinz Nixdorf Instituts. Paderborn, 2017. chicago-de: 'Deuter, Andreas, Andreas Otte und Daniel Höllisch. 2017. Methodisches Vorgehen zur Entwicklung und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration. In: Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017, hg. von Ansgar Trächtler und Heinz Nixdorf Institut, 369:211–222. Verlagsschriftenreihe des Heinz Nixdorf Instituts. Paderborn.' din1505-2-1: 'Deuter, Andreas ; Otte, Andreas ; Höllisch, Daniel: Methodisches Vorgehen zur Entwicklung und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration. In: Trächtler, A. ; Heinz Nixdorf Institut (Hrsg.): Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017, Verlagsschriftenreihe des Heinz Nixdorf Instituts. Bd. 369. Paderborn, 2017, S. 211–222' havard: 'A. Deuter, A. Otte, D. Höllisch, Methodisches Vorgehen zur Entwicklung und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration, in: A. Trächtler, Heinz Nixdorf Institut (Eds.), Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017, Paderborn, 2017: pp. 211–222.' ieee: A. Deuter, A. Otte, and D. Höllisch, “Methodisches Vorgehen zur Entwicklung und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration,” in Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017, Paderborn, 2017, vol. 369, pp. 211–222. mla: Deuter, Andreas, et al. “Methodisches Vorgehen zur Entwicklung und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration.” Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017, edited by Ansgar Trächtler and Heinz Nixdorf Institut, vol. 369, 2017, pp. 211–22. short: 'A. Deuter, A. Otte, D. Höllisch, in: A. Trächtler, Heinz Nixdorf Institut (Eds.), Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017, Paderborn, 2017, pp. 211–222.' ufg: 'Deuter, Andreas et. al. (2017): Methodisches Vorgehen zur Entwicklung und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration, in: Ansgar Trächtler/Heinz Nixdorf Institut (Hgg.): Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017 (=Verlagsschriftenreihe des Heinz Nixdorf Instituts 369), Paderborn, S. 211–222.' van: 'Deuter A, Otte A, Höllisch D. Methodisches Vorgehen zur Entwicklung und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration. In: Trächtler A, Heinz Nixdorf Institut, editors. Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017. Paderborn; 2017. p. 211–22. (Verlagsschriftenreihe des Heinz Nixdorf Instituts; vol. 369).' conference: end_date: 2017-11-12 location: Paderborn name: 'Wissenschafts- und Industrieforum Intelligente Technische Systeme 2017 ' start_date: 2017-05-11 corporate_editor: - Heinz Nixdorf Institut - Universität Paderborn date_created: 2019-02-21T16:30:41Z date_updated: 2023-03-15T13:50:03Z department: - _id: DEP1306 - _id: DEP7022 editor: - first_name: Ansgar full_name: Trächtler, Ansgar last_name: Trächtler intvolume: ' 369' language: - iso: ger page: 211-222 place: Paderborn publication: Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017 publication_status: published series_title: Verlagsschriftenreihe des Heinz Nixdorf Instituts status: public title: Methodisches Vorgehen zur Entwicklung und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration type: conference user_id: '62088' volume: 369 year: 2017 ... --- _id: '309' abstract: - lang: eng text: "It is our pleasure to introduce the seventh edition of the International Conference on Production Engineering and Management (PEM), an event that is the result of the joint effort of the University of Trieste and the Ostwestfalen-\r\nLippe University of Applied Sciences. The conference has been established as an annual meeting under the Double Degree Master Program “Production Engineering and Management” by the two partner universities. This year the conference is hosted at the university campus in Pordenone. The main goal of the conference is to offer students, researchers and professionals in Germany, Italy and abroad, an opportunity to meet and exchange information, discuss experience, specific practices and technical solutions for planning, design and management of manufacturing and service systems and processes. As always, the conference is a platform aimed at presenting research projects, introducing young academics to the tradition of symposiums and promoting the exchange of ideas between the industry and the academy. This year’s special focus is on industry sustainability, which is currently a major topic of discussion among experts and professionals. Sustainability can be considered as a requirement for any modern production processes and systems, and also has to be embedded in the context of Industry 4.0. In fact, the features and problems of industry 4.0 have been widely discussed in the last editions of the PEM conference, in which efficiency and waste reduction emerged as key factors. The study and development of the connections between future industry and sustainability is therefore critical, as highlighted in the recent “German Sustainable Development Strategy and the 2030 Agenda”. Accordingly, the seventh edition of the PEM conference aims to offer a contribution to the debate. The conference program includes 25 speeches organized in six sessions. Three are specifically dedicated to “Direct Digital Manufacturing in the context of Industry 4.0” and “Technology and Business for Circular Economy and Sustainable Production”. The other sessions are covering areas of great interest and importance to the participants of the conference, which are related to the main focus: “Innovative Management Techniques and Methodologies”, “Industrial Engineering and Lean Management” and “Wood Processing Technologies and Furniture Production”. The proceedings of the conference include the articles submitted and accepted after a careful double-blind refereeing process." citation: ama: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2017:248. apa: Padoano, E., Villmer, F.-J., & Department of Production Engineering and Management (Eds.). (2017). Production Engineering and Management (p. 248). Presented at the 7th International Conference, Lemgo. bjps: Padoano E, Villmer F-J and Department of Production Engineering and Management (eds) (2017) Production Engineering and Management. Lemgo. chicago: Padoano, Elio, Franz-Josef Villmer, and Department of Production Engineering and Management, eds. Production Engineering and Management. Schriftenreihe Logistik. Lemgo, 2017. chicago-de: Padoano, Elio, Franz-Josef Villmer und Department of Production Engineering and Management, Hrsg. 2017. Production Engineering and Management. Schriftenreihe Logistik. Lemgo. din1505-2-1: 'Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management, Schriftenreihe Logistik. Lemgo, 2017' havard: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, eds., Production Engineering and Management, Lemgo, 2017. ieee: E. Padoano, F.-J. Villmer, and Department of Production Engineering and Management, Eds., Production Engineering and Management, no. . Lemgo, 2017, p. 248. mla: Padoano, Elio, et al., editors. Production Engineering and Management. no. ., 2017, p. 248. short: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, eds., Production Engineering and Management, Lemgo, 2017. ufg: 'Padoano, Elio et. al. (Hgg.) (2017): Production Engineering and Management (=Schriftenreihe Logistik), Lemgo.' van: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2017. (Schriftenreihe Logistik). conference: end_date: 2017-09-29 location: Pardenone, Italy name: 7th International Conference start_date: 2017-09-28 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2018-12-04T16:24:04Z date_updated: 2023-03-15T13:49:44Z ddc: - '650' department: - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer file: - access_level: open_access content_type: application/pdf creator: hka-zn8 date_created: 2018-12-04T16:21:07Z date_updated: 2018-12-04T16:21:07Z file_id: '310' file_name: PEM_2017_Proceeding_web.pdf file_size: 7437227 relation: main_file success: 1 file_date_updated: 2018-12-04T16:21:07Z has_accepted_license: '1' issue: . language: - iso: eng oa: '1' page: '248' place: Lemgo publication_identifier: isbn: - 978-3-946856-01-6 publication_status: published series_title: Schriftenreihe Logistik status: public title: Production Engineering and Management type: conference_editor user_id: '68554' year: 2017 ... --- _id: '457' abstract: - lang: eng text: "Additive Manufacturing (AM) increasingly enables the realization of structures, which have a much greater freedom of design und can therefore better use nature \ as a design ideal. Bionic design principles have already been introduced \ into general design approaches, and several topology optimization systems (TO) are available today to increase structural stiffness and to enable lightweight \ design. AM and TO, used in synergy, promise completely new application areas. However, staircase effects resulting from a layer-by-layer build process \ and unavoidable support structures which must be mechanically removed afterwards are disadvantageous with respect to surface texture and strength properties.\r\nThe present article addresses the question of how far the notches resulting from the staircase effect of Additive Manufacturing and the support structures removed \ decrease the strength of components. Most engineers try to follow the inner flow of forces in a part’s design by smoothening surfaces in notched areas. Considering this, a elected component is investigated with finite element \ analysis (FEA) with special regard for the concentration of tress arising from surface notch effects. An outlook is given as regards how a reduction of the notch effect from the taircase effect can be achieved effectively." author: - first_name: Eva full_name: Scheideler, Eva id: '61522' last_name: Scheideler - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer - first_name: G. full_name: Adam, G. last_name: Adam - first_name: Mirco full_name: Timmer, Mirco id: '69228' last_name: Timmer conference: end_date: 2016-09-30 location: Lemgo name: Proceedings 6th International Conference start_date: 2016-09-29 corporate_editor: - Department of Production Engineering and Management OWL University of Applied Sciences, Lemgo (Germany) - Hochschule Ostwestfalen-Lippe date_created: 2019-01-22T14:07:32Z date_updated: 2023-03-15T13:49:54Z department: - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Additive Manufacturing - Topology optimization - Staircase effect - Support structures - Stress concentration - Lightweight construction - Design rules - Notch effect language: - iso: eng main_file_link: - open_access: '1' url: https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf oa: '1' page: 39-50 place: Lemgo publication: Production Engineering and Management Proceedings 6th International Conference publication_identifier: isbn: - 978-3-946856-00-9 publication_status: published status: public title: Topology Optimization and Additive Manufacturing – A Perfect Symbiosis? type: conference user_id: '79260' year: 2016 ... --- _id: '7790' author: - first_name: Andreas full_name: Deuter, Andreas id: '62088' last_name: Deuter - first_name: Stefano full_name: Rizzo, Stefano last_name: Rizzo date_created: 2022-04-25T10:55:50Z date_updated: 2023-03-15T13:50:11Z department: - _id: DEP7022 - _id: DEP1306 doi: 10.1016/j.protcy.2016.08.052 intvolume: ' 26' keyword: - PLM - ALM - OSLC language: - iso: eng main_file_link: - open_access: '1' url: https://ac.els-cdn.com/S2212017316303991/1-s2.0-S2212017316303991-main.pdf?_tid=8dfced2e-99dd-4685-8e56-e2d0e34221b2&acdnat=1550505132_3a1d65435574592a67c32f00208a06e2 oa: '1' page: 405-412 place: ' Amsterdam [u.a.] ' publication: Procedia Technology publication_identifier: issn: - 2212-0173 publication_status: published publisher: ' Elsevier' related_material: link: - relation: contains url: https://ac.els-cdn.com/S2212017316303991/1-s2.0-S2212017316303991-main.pdf?_tid=8dfced2e-99dd-4685-8e56-e2d0e34221b2&acdnat=1550505132_3a1d65435574592a67c32f00208a06e2 status: public title: A Critical View on PLM/ALM Convergence in Practice and Research type: scientific_journal_article user_id: '79260' volume: 26 year: 2016 ... --- _id: '584' abstract: - lang: eng text: Due to the continuing trend towards more complexity of products with an increasing number of variants and smaller lot sizes, the assembly often takes place -despite relatively high labor costs in Western industrialized nations -manually or partially automated. An outsourcing or relocation of assembly function abroad is not suitable in most cases.Therefore, it is increasingly important to reduce process variations and waste in manual assembly processes. Assistance systems have the potential, depending on the situation, to assist the worker in his work, to reduce error rate and to increase productivity. In a first part of the paper an overview will be given to different types of assembly assistance systems. Then a morphological chart is developed, which can provide assistance in selecting or comparing assembly assistance systems. With the help of this chart an assembly assistant system is presented. Finally a quick look is taken at further research being done in this area. author: - first_name: Sven full_name: Hinrichsen, Sven id: '49010' last_name: Hinrichsen - first_name: Daniel full_name: Riediger, Daniel id: '52263' last_name: Riediger - first_name: Alexander full_name: Unrau, Alexander id: '64690' last_name: Unrau citation: ama: 'Hinrichsen S, Riediger D, Unrau A. Assistance Systems in Manual Assembly. In: Villmer FJ, Padoano E, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management. ; 2016:3-14.' apa: Hinrichsen, S., Riediger, D., & Unrau, A. (2016). Assistance Systems in Manual Assembly. In F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management (Issue 01, pp. 3–14). bjps: Hinrichsen S, Riediger D and Unrau A (2016) Assistance Systems in Manual Assembly. In Villmer F-J et al. (eds), Production Engineering and Management. Lemgo, pp. 3–14. chicago: Hinrichsen, Sven, Daniel Riediger, and Alexander Unrau. “Assistance Systems in Manual Assembly.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, Department of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, 3–14. Lemgo, 2016. chicago-de: 'Hinrichsen, Sven, Daniel Riediger und Alexander Unrau. 2016. Assistance Systems in Manual Assembly. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, Department of Production Engineering and Management, und Hochschule Ostwestfalen-Lippe, 3–14. Lemgo.' din1505-2-1: 'Hinrichsen, Sven ; Riediger, Daniel ; Unrau, Alexander: Assistance Systems in Manual Assembly. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management ; Hochschule Ostwestfalen-Lippe (Hrsg.): Production Engineering and Management. Lemgo, 2016, S. 3–14' havard: 'S. Hinrichsen, D. Riediger, A. Unrau, Assistance Systems in Manual Assembly, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management, Lemgo, 2016: pp. 3–14.' ieee: S. Hinrichsen, D. Riediger, and A. Unrau, “Assistance Systems in Manual Assembly,” in Production Engineering and Management, Lemgo, 2016, no. 01, pp. 3–14. mla: Hinrichsen, Sven, et al. “Assistance Systems in Manual Assembly.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 01, 2016, pp. 3–14. short: 'S. Hinrichsen, D. Riediger, A. Unrau, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management, Lemgo, 2016, pp. 3–14.' ufg: 'Hinrichsen, Sven/Riediger, Daniel/Unrau, Alexander: Assistance Systems in Manual Assembly, in: Villmer, Franz-Josef u. a. (Hgg.): Production Engineering and Management, Lemgo 2016,  S. 3–14.' van: 'Hinrichsen S, Riediger D, Unrau A. Assistance Systems in Manual Assembly. In: Villmer FJ, Padoano E, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, editors. Production Engineering and Management. Lemgo; 2016. p. 3–14.' conference: end_date: 2016-09-30 location: Lemgo name: Proceedings 6th International Conference start_date: 2016-09-29 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T14:30:50Z date_updated: 2023-04-14T11:27:48Z ddc: - '620' department: - _id: DEP7020 - _id: DEP1306 - _id: DEP1305 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano file: - access_level: open_access content_type: application/pdf creator: mqc-p4h date_created: 2023-04-14T11:26:54Z date_updated: 2023-04-14T11:26:54Z file_id: '9700' file_name: PEM_2016_Hinrichsen Riediger Unrau.pdf file_size: 462853 relation: main_file success: 1 file_date_updated: 2023-04-14T11:26:54Z has_accepted_license: '1' issue: '01' keyword: - Assistance systems - Manual assembly - Morphology language: - iso: eng oa: '1' page: 3-14 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-946856-00-9 publication_status: published quality_controlled: '1' status: public title: Assistance Systems in Manual Assembly type: conference user_id: '49010' year: '2016' ... --- _id: '586' abstract: - lang: eng text: Under the circumstance of advanced globalization, it is increasingly difficult for production companies to remain competitiveness. Many of them are forced to restrict budget and reduce production costs. In addition, the customization of product increases continuously. This results in extension of product variation and reduction of product life cycle. Therefore, the companies need a high flexibility to respond quickly to changes in the market and to customer requirements. Lean thinking, as a powerful tool, has been implemented by many companies in production and manufacturing. In order to avoid waste in lean manufacturing, it is necessary to manage efficiently the material flow. In this study, for a lean material handling system in the lean manufacturing of a company, an in-plant milk-run distribution system is taken into consideration. The system consistsof vehicles, which move periodically in certain routes. The materials are delivered in short intervals from a central storage area to several points of use in the production. By using milk-run in plant, the material handling processes can be standardized and therefore the waste can be eliminated. One additional aim of the study with milk-run distribution for the material provision is to minimize the handling time, which determines directly the personal costs. In order to realize the aim, the work has beendivided into several steps. At first, the production processes, especially the material provision for the production have been analyzed. Secondly, the technological solutions have been analyzed in order to handle different loading units required by different machines in the production. Thirdly, the milk-run distribution for lean production is formulated as an optimization problem with the object of minimizing the number of vehicles and the distance traveled under the constraints of specific time periods, capacity of vehicle and related stations etc. Fourthly, two optimization methods are developed in order to find the optimal solution for the milk-run problem and the performance of different methods is also compared. author: - first_name: Li full_name: Li, Li id: '58482' last_name: Li - first_name: L. full_name: Schulze, L. last_name: Schulze citation: ama: 'Li L, Schulze L. In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Lemgo; 2016:65-76.' apa: Li, L., & Schulze, L. (2016). In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.) (pp. 65–76). Presented at the Proceedings 6th International Conference, Lemgo. bjps: Li L and Schulze L (2016) In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds). Lemgo, pp. 65–76. chicago: Li, Li, and L. Schulze. “In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production.” edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 65–76. Lemgo, 2016. chicago-de: 'Li, Li und L. Schulze. 2016. In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production. In: , hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 65–76. Lemgo.' din1505-2-1: 'Li, Li ; Schulze, L.: In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): . Lemgo, 2016, S. 65–76' havard: 'L. Li, L. Schulze, In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Lemgo, 2016: pp. 65–76.' ieee: L. Li and L. Schulze, “In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production,” presented at the Proceedings 6th International Conference, Lemgo, 2016, no. 1, pp. 65–76. mla: Li, Li, and L. Schulze. In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production. Edited by Franz-Josef Villmer et al., no. 1, 2016, pp. 65–76. short: 'L. Li, L. Schulze, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Lemgo, 2016, pp. 65–76.' ufg: 'Li, Li/Schulze, L. (2016): In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production, in: Franz-Josef Villmer et. al. (Hgg.): , Lemgo, S. 65–76.' van: 'Li L, Schulze L. In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Lemgo; 2016. p. 65–76.' conference: end_date: 2019-09-30 location: Lemgo name: Proceedings 6th International Conference start_date: 2016-09-29 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T14:39:16Z date_updated: 2023-03-15T13:50:02Z department: - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Milk-Run - Material provision - Lean production - Genetic algorithm language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf oa: '1' page: 65-76 place: Lemgo publication_identifier: isbn: - 978-3-946856-00-9 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf status: public title: In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production type: conference user_id: '45673' year: 2016 ... --- _id: '587' abstract: - lang: eng text: Development engineers are most valued for their excellence in physical product development, but on the flipside, project managers face problems when trying to fit them into effectively running development processes. Because of the advantages of Lean Management in production (Lean Production), process managers often try to transfer lean principles directly to development processes, not considering that major differences exist between well-described production processes and new product development processes which include much more uncertainty and risk. Nevertheless, several lean principals are applicable in product development. This paper describes five lean development insights (LDIs) which were found when optimizing an entire product realization process. Lean principles have been examined and then translated to collaboration between product development and tool manufacturing at a globally operating German family-run company. These LDIs are meant to help project and process managers, consultants and developers to rethink their ways of organizing product development. The application of these insights will result in increased transparency, intensified collaboration, improved processes and quality, shortened lead times, and also eliminate waste. author: - first_name: M. full_name: Riediger, M. last_name: Riediger - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: 'Riediger M, Villmer F-J. Five Insights in Effectively Managing Product Development. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2016:111-122.' apa: Riediger, M., & Villmer, F.-J. (2016). Five Insights in Effectively Managing Product Development. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 111–122). Lemgo. bjps: Riediger M and Villmer F-J (2016) Five Insights in Effectively Managing Product Development. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 111–122. chicago: Riediger, M., and Franz-Josef Villmer. “Five Insights in Effectively Managing Product Development.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 111–22. Lemgo, 2016. chicago-de: 'Riediger, M. und Franz-Josef Villmer. 2016. Five Insights in Effectively Managing Product Development. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 111–122. Lemgo.' din1505-2-1: 'Riediger, M. ; Villmer, Franz-Josef: Five Insights in Effectively Managing Product Development. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2016, S. 111–122' havard: 'M. Riediger, F.-J. Villmer, Five Insights in Effectively Managing Product Development, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2016: pp. 111–122.' ieee: M. Riediger and F.-J. Villmer, “Five Insights in Effectively Managing Product Development,” in Production Engineering and Management, Lemgo, 2016, no. 1, pp. 111–122. mla: Riediger, M., and Franz-Josef Villmer. “Five Insights in Effectively Managing Product Development.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2016, pp. 111–22. short: 'M. Riediger, F.-J. Villmer, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2016, pp. 111–122.' ufg: 'Riediger, M./Villmer, Franz-Josef (2016): Five Insights in Effectively Managing Product Development, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 111–122.' van: 'Riediger M, Villmer F-J. Five Insights in Effectively Managing Product Development. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2016. p. 111–22.' conference: end_date: 2016-09-30 location: Lemgo name: Proceedings 6th International Conference start_date: 2016-09-29 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T14:47:41Z date_updated: 2023-03-15T13:50:02Z department: - _id: DEP7000 - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Lean development - Collaboration - Agile - PLM - Frontloading - Simultaneous engineering language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf oa: '1' page: 111-122 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-946856-00-9 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf status: public title: Five Insights in Effectively Managing Product Development type: conference user_id: '45673' year: 2016 ... --- _id: '590' abstract: - lang: eng text: Against the background of rising overhead costs in manufacturing companies the application of methods of overhead cost management is of increasing importance. Within this article existing approaches of cost management are explained in principle. Based on these approaches a new complementary approach of managing costs with the help of costs elasticity ratios is described by a case study. The method is based on the hypothesis that there are no fixed personnel costs, but personnel costs with different elasticity with respect to the volume of orders. Personnel costs elasticity (ε) is derived from the quotient of the relative change in personnel costs (k) and the relative change of the order volume (q) of a billing month (i). The method aims to increase the flexibility of overhead costs, but can also be applied with respect to so-called direct costs. In this case, the question arises as to what extent the direct costs actually develop proportional elastic over time. author: - first_name: Sven full_name: Hinrichsen, Sven id: '49010' last_name: Hinrichsen citation: ama: 'Hinrichsen S. How Elasticity Indicators Support Cost Management. In: Villmer FJ, Padoano E, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management. ; 2016:123-131.' apa: Hinrichsen, S. (2016). How Elasticity Indicators Support Cost Management. In F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management (Issue 1, pp. 123–131). bjps: Hinrichsen S (2016) How Elasticity Indicators Support Cost Management. In Villmer F-J et al. (eds), Production Engineering and Management. Lemgo, pp. 123–131. chicago: Hinrichsen, Sven. “How Elasticity Indicators Support Cost Management.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, Department of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, 123–31. Lemgo, 2016. chicago-de: 'Hinrichsen, Sven. 2016. How Elasticity Indicators Support Cost Management. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, Department of Production Engineering and Management, und Hochschule Ostwestfalen-Lippe, 123–131. Lemgo.' din1505-2-1: 'Hinrichsen, Sven: How Elasticity Indicators Support Cost Management. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management ; Hochschule Ostwestfalen-Lippe (Hrsg.): Production Engineering and Management. Lemgo, 2016, S. 123–131' havard: 'S. Hinrichsen, How Elasticity Indicators Support Cost Management, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management, Lemgo, 2016: pp. 123–131.' ieee: S. Hinrichsen, “How Elasticity Indicators Support Cost Management,” in Production Engineering and Management, Lemgo, 2016, no. 1, pp. 123–131. mla: Hinrichsen, Sven. “How Elasticity Indicators Support Cost Management.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2016, pp. 123–31. short: 'S. Hinrichsen, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management, Lemgo, 2016, pp. 123–131.' ufg: 'Hinrichsen, Sven: How Elasticity Indicators Support Cost Management, in: Villmer, Franz-Josef u. a. (Hgg.): Production Engineering and Management, Lemgo 2016,  S. 123–131.' van: 'Hinrichsen S. How Elasticity Indicators Support Cost Management. In: Villmer FJ, Padoano E, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, editors. Production Engineering and Management. Lemgo; 2016. p. 123–31.' conference: end_date: 2016-09-30 location: Lemgo name: Proceedings 6th International Conference start_date: 2016-09-29 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T15:23:42Z date_updated: 2023-04-14T11:37:27Z ddc: - '330' department: - _id: DEP1306 - _id: DEP7020 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano file: - access_level: open_access content_type: application/pdf creator: mqc-p4h date_created: 2023-04-14T11:36:14Z date_updated: 2023-04-14T11:36:14Z file_id: '9701' file_name: PEM 2016 paper Hinrichsen final.pdf file_size: 130007 relation: main_file success: 1 file_date_updated: 2023-04-14T11:36:14Z has_accepted_license: '1' issue: '1' keyword: - Cost management - Overhead costs - Direct costs - Labor costs - Elasticity language: - iso: eng oa: '1' page: 123-131 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-946856-00-9 publication_status: published status: public title: How Elasticity Indicators Support Cost Management type: conference user_id: '49010' year: '2016' ... --- _id: '593' abstract: - lang: eng text: Due to the increased individualization of customer demands in the last 20 years, the production systems are required to be more flexible and scalable. It is the samefor the material flow system with automated guided vehicles (AGVs). To realize the flexibility and scalability, it is recommended to decentralized control the vehicles. As an attempt, a concept of swarm intelligence with Radio Frequency Identification (RFID) is proposed and introduced in this article. The concept is supposed to be used for automated guided vehicle systems in which objects have to be transported from place to place. Therefore the object has to be self-organized and has to manage its own transport. In this context the vehicles have to choose the most optimal transportation. Swarm intelligence is a topic which deserves a high level of attention as a method to realize high flexibility and scalability. author: - first_name: Alisa Maria full_name: Cantauw, Alisa Maria id: '56638' last_name: Cantauw - first_name: Li full_name: Li, Li id: '58482' last_name: Li citation: ama: 'Cantauw AM, Li L. Application of Swarm Intelligence for Automated Guided Vehicle Systems. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Department of Production Engineering and Management. Lemgo; 2016:133-143.' apa: Cantauw, A. M., & Li, L. (2016). Application of Swarm Intelligence for Automated Guided Vehicle Systems. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Department of Production Engineering and Management (pp. 133–143). Lemgo. bjps: Cantauw AM and Li L (2016) Application of Swarm Intelligence for Automated Guided Vehicle Systems. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Department of Production Engineering and Management. Lemgo, pp. 133–143. chicago: Cantauw, Alisa Maria, and Li Li. “Application of Swarm Intelligence for Automated Guided Vehicle Systems.” In Department of Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 133–43. Lemgo, 2016. chicago-de: 'Cantauw, Alisa Maria und Li Li. 2016. Application of Swarm Intelligence for Automated Guided Vehicle Systems. In: Department of Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 133–143. Lemgo.' din1505-2-1: 'Cantauw, Alisa Maria ; Li, Li: Application of Swarm Intelligence for Automated Guided Vehicle Systems. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Department of Production Engineering and Management. Lemgo, 2016, S. 133–143' havard: 'A.M. Cantauw, L. Li, Application of Swarm Intelligence for Automated Guided Vehicle Systems, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Department of Production Engineering and Management, Lemgo, 2016: pp. 133–143.' ieee: A. M. Cantauw and L. Li, “Application of Swarm Intelligence for Automated Guided Vehicle Systems,” in Department of Production Engineering and Management, Lemgo, 2016, no. 1, pp. 133–143. mla: Cantauw, Alisa Maria, and Li Li. “Application of Swarm Intelligence for Automated Guided Vehicle Systems.” Department of Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2016, pp. 133–43. short: 'A.M. Cantauw, L. Li, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Department of Production Engineering and Management, Lemgo, 2016, pp. 133–143.' ufg: 'Cantauw, Alisa Maria/Li, Li (2016): Application of Swarm Intelligence for Automated Guided Vehicle Systems, in: Franz-Josef Villmer et. al. (Hgg.): Department of Production Engineering and Management, Lemgo, S. 133–143.' van: 'Cantauw AM, Li L. Application of Swarm Intelligence for Automated Guided Vehicle Systems. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Department of Production Engineering and Management. Lemgo; 2016. p. 133–43.' conference: end_date: 2016-09-30 location: Lemgo name: Proceedings 6th International Conference start_date: 2016-09-29 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T15:32:10Z date_updated: 2023-03-15T13:50:03Z department: - _id: DEP7000 - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Swarm intelligence - Automated guided vehicle system - RFID - Internet of things - Multi-agent system language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf oa: '1' page: 133-143 place: Lemgo publication: Department of Production Engineering and Management publication_identifier: isbn: - 978-3-946856-00-9 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf status: public title: Application of Swarm Intelligence for Automated Guided Vehicle Systems type: conference user_id: '45673' year: 2016 ... --- _id: '594' abstract: - lang: eng text: Due to steadily increased demand for customized products, as well as their enhanced complexity and shorter product lifecycles, companies in all industries require a reliable prediction of the expected product development costs from the very start of product realization. Incorrectly estimated project costs may lead to serious consequences in the course of a development project. For example, offers are most often based on such early cost estimations and consequently, a major safety margin has to be added, which may result in the refusal of an order. A too low estimation of the costs of aproduct development project, on the other hand, may result in a loss for the project.In this paper, a software tool is presented for the prediction of product development costs which offers the user the ability to create a more accurate prediction of project costs on the basis of a minimum of retrograde project information. By combining a parametric cost model and cost result with stochastic character, based on the Monte Carlo method, in one software system, it is possible to significantly improve projectcost estimations. author: - first_name: Andreas full_name: Otte, Andreas id: '51466' last_name: Otte - first_name: Eva full_name: Scheideler, Eva id: '61522' last_name: Scheideler - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: 'Otte A, Scheideler E, Villmer F-J. Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Department of Production Engineering and Management. Lemgo; 2016:281-292.' apa: Otte, A., Scheideler, E., & Villmer, F.-J. (2016). Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Department of Production Engineering and Management (pp. 281–292). Lemgo. bjps: Otte A, Scheideler E and Villmer F-J (2016) Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Department of Production Engineering and Management. Lemgo, pp. 281–292. chicago: Otte, Andreas, Eva Scheideler, and Franz-Josef Villmer. “Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage.” In Department of Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 281–92. Lemgo, 2016. chicago-de: 'Otte, Andreas, Eva Scheideler und Franz-Josef Villmer. 2016. Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage. In: Department of Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 281–292. Lemgo.' din1505-2-1: 'Otte, Andreas ; Scheideler, Eva ; Villmer, Franz-Josef: Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Department of Production Engineering and Management. Lemgo, 2016, S. 281–292' havard: 'A. Otte, E. Scheideler, F.-J. Villmer, Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Department of Production Engineering and Management, Lemgo, 2016: pp. 281–292.' ieee: A. Otte, E. Scheideler, and F.-J. Villmer, “Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage,” in Department of Production Engineering and Management, Lemgo, 2016, no. 1, pp. 281–292. mla: Otte, Andreas, et al. “Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage.” Department of Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2016, pp. 281–92. short: 'A. Otte, E. Scheideler, F.-J. Villmer, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Department of Production Engineering and Management, Lemgo, 2016, pp. 281–292.' ufg: 'Otte, Andreas et. al. (2016): Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage, in: Franz-Josef Villmer et. al. (Hgg.): Department of Production Engineering and Management, Lemgo, S. 281–292.' van: 'Otte A, Scheideler E, Villmer F-J. Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Department of Production Engineering and Management. Lemgo; 2016. p. 281–92.' conference: end_date: 2016-09-30 location: Lemgo name: Proceedings 6th International Conference start_date: 2016-09-29 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T15:41:41Z date_updated: 2023-03-15T13:50:03Z department: - _id: DEP7000 - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Cost prediction - Product realization projects - Monte Carlo method - Parametric cost model - Software tool language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf oa: '1' page: 281-292 place: Lemgo publication: Department of Production Engineering and Management publication_identifier: isbn: - 978-3-946856-00-9 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf status: public title: Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage type: conference user_id: '45673' year: 2016 ... --- _id: '472' abstract: - lang: eng text: "In the context of Industrie 4.0 respectively direct digital manufacturing, seamless process chains are an important factor. The objective is to shorten the time between quoting for individually designed products and their production and delivery. Therefore, reliable automated and fast evaluation procedures are needed to ensure the quality of the individually designed products in terms of product safety and reliability. This paper aims \r\nto demonstrate how a metamodel, generated on simulated data, adapts to the type of product and delivers the required quality and evaluation procedure. The metamodel guarantees the requested characteristics of the final product without the consultation of human expert knowledge. As proof of concept, a simple, well-documented task from the field of construction has been chosen. The estimation from of the metamodel will meet all safety requirements, is based on the individual input variables and is confirmed without expert interaction. Fast, reliable prediction models deriving from complex simulation models are indispensable conditions for direct digital manufacturing. Using metamodels in automation contexts will be a foundation of manufacturing in future." author: - first_name: Eva full_name: Scheideler, Eva id: '61522' last_name: Scheideler - first_name: Andrea full_name: Ahlemeyer-Stubbe, Andrea last_name: Ahlemeyer-Stubbe citation: ama: 'Scheideler E, Ahlemeyer-Stubbe A. Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments. In: Villmer FJ, Padoano E, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management : Proceedings 6th International Conference, September 29 and 30, 2016 Lemgo, Germany . Vol 2016.   Publication series in direct digital manufacturing . Hochschule Ostwestfalen-Lippe; 2016:269-280.' apa: 'Scheideler, E., & Ahlemeyer-Stubbe, A. (2016). Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments. In F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe (Eds.), Production engineering and management : proceedings 6th international conference, September 29 and 30, 2016 Lemgo, Germany (Vol. 2016, Issue 1, pp. 269–280). Hochschule Ostwestfalen-Lippe.' bjps: 'Scheideler E and Ahlemeyer-Stubbe A (2016) Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments. In Villmer F-J et al. (eds), Production Engineering and Management : Proceedings 6th International Conference, September 29 and 30, 2016 Lemgo, Germany , vol. 2016. Lemgo: Hochschule Ostwestfalen-Lippe, pp. 269–280.' chicago: 'Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments.” In Production Engineering and Management : Proceedings 6th International Conference, September 29 and 30, 2016 Lemgo, Germany , edited by Franz-Josef Villmer, Elio Padoano, Department of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, 2016:269–80.   Publication Series in Direct Digital Manufacturing . Lemgo: Hochschule Ostwestfalen-Lippe, 2016.' chicago-de: 'Scheideler, Eva und Andrea Ahlemeyer-Stubbe. 2016. Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments. In: Production engineering and management : proceedings 6th international conference, September 29 and 30, 2016 Lemgo, Germany , hg. von Franz-Josef Villmer, Elio Padoano, Department of Production Engineering and Management, und Hochschule Ostwestfalen-Lippe, 2016:269–280.   Publication series in direct digital manufacturing . Lemgo: Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Scheideler, Eva ; Ahlemeyer-Stubbe, Andrea: Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management ; Hochschule Ostwestfalen-Lippe (Hrsg.): Production engineering and management : proceedings 6th international conference, September 29 and 30, 2016 Lemgo, Germany ,   Publication series in direct digital manufacturing . Bd. 2016. Lemgo : Hochschule Ostwestfalen-Lippe, 2016, S. 269–280' havard: 'E. Scheideler, A. Ahlemeyer-Stubbe, Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management : Proceedings 6th International Conference, September 29 and 30, 2016 Lemgo, Germany , Hochschule Ostwestfalen-Lippe, Lemgo, 2016: pp. 269–280.' ieee: 'E. Scheideler and A. Ahlemeyer-Stubbe, “Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments,” in Production engineering and management : proceedings 6th international conference, September 29 and 30, 2016 Lemgo, Germany , Lemgo, 2016, vol. 2016, no. 1, pp. 269–280.' mla: 'Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments.” Production Engineering and Management : Proceedings 6th International Conference, September 29 and 30, 2016 Lemgo, Germany , edited by Franz-Josef Villmer et al., vol. 2016, no. 1, Hochschule Ostwestfalen-Lippe, 2016, pp. 269–80.' short: 'E. Scheideler, A. Ahlemeyer-Stubbe, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management : Proceedings 6th International Conference, September 29 and 30, 2016 Lemgo, Germany , Hochschule Ostwestfalen-Lippe, Lemgo, 2016, pp. 269–280.' ufg: 'Scheideler, Eva/Ahlemeyer-Stubbe, Andrea: Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments, in: Villmer, Franz-Josef u. a. (Hgg.): Production engineering and management : proceedings 6th international conference, September 29 and 30, 2016 Lemgo, Germany , Bd. 2016, Lemgo 2016 (  Publication series in direct digital manufacturing ),  S. 269–280.' van: 'Scheideler E, Ahlemeyer-Stubbe A. Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments. In: Villmer FJ, Padoano E, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, editors. Production engineering and management : proceedings 6th international conference, September 29 and 30, 2016 Lemgo, Germany . Lemgo: Hochschule Ostwestfalen-Lippe; 2016. p. 269–80. (  Publication series in direct digital manufacturing ; vol. 2016).' conference: end_date: 2016-09-30 location: Lemgo name: '6th International Conference on Production Engineering and Management ' start_date: 2016-09-29 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-01-29T13:06:45Z date_updated: 2024-03-22T13:18:42Z department: - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano intvolume: ' 2016' issue: '1' keyword: - Simulation - Metamodel - Computer experiment - Design of experiments language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf oa: '1' page: 269-280 place: Lemgo publication: 'Production engineering and management : proceedings 6th international conference, September 29 and 30, 2016 Lemgo, Germany ' publication_identifier: unknown: - 978-3-946856-00-9 publication_status: published publisher: Hochschule Ostwestfalen-Lippe related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf series_title: "\t Publication series in direct digital manufacturing " status: public title: Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments type: conference user_id: '83781' volume: 2016 year: '2016' ... --- _id: '473' abstract: - lang: eng text: "Additive Manufacturing (AM) describes a number of technologies that generate three-dimensional objects directly from CAD data by joining volume elements. Dental technology is one sector in which the benefits of AM come into effect, as parts such as frameworks or implants are unique objects often with freeform shapes. These objects are difficult and expensive to produce with subtractive or formative technology.\r\nDuring the last decades, the application of digital technologies in the dental industry has increased. Therefore AM has also evolved to become a standard dental framework manufacturing process. While previously the dental laboratory did the complete manufacturing of dental frameworks, AM parts are usually produced by service providers, thus increasing the number of process participants. Under these circumstances, a reliable high quality production must be ensured. This requires a comprehensive Quality Management (QM) concept for the whole process chain. A first step in the evelopment of this QM concept is the definition of the product requirements, from which process specifications can be determined. These specifications build the basis for evaluating the process capability of the Additive Manufacturing process." author: - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: 'Huxol A, Villmer F-J. Special Requirements for Additive Manufacturing of Dental Frameworks. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. ; 2016:15-26.' apa: Huxol, A., & Villmer, F.-J. (2016). Special Requirements for Additive Manufacturing of Dental Frameworks. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 15–26). Lemgo. bjps: Huxol A and Villmer F-J (2016) Special Requirements for Additive Manufacturing of Dental Frameworks. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Production Engineering and Management. pp. 15–26. chicago: Huxol, Andrea, and Franz-Josef Villmer. “Special Requirements for Additive Manufacturing of Dental Frameworks.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 15–26, 2016. chicago-de: 'Huxol, Andrea und Franz-Josef Villmer. 2016. Special Requirements for Additive Manufacturing of Dental Frameworks. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 15–26.' din1505-2-1: 'Huxol, Andrea ; Villmer, Franz-Josef: Special Requirements for Additive Manufacturing of Dental Frameworks. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management, 2016, S. 15–26' havard: 'A. Huxol, F.-J. Villmer, Special Requirements for Additive Manufacturing of Dental Frameworks, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, 2016: pp. 15–26.' ieee: A. Huxol and F.-J. Villmer, “Special Requirements for Additive Manufacturing of Dental Frameworks,” in Production Engineering and Management, Lemgo, 2016, no. 1, pp. 15–26. mla: Huxol, Andrea, and Franz-Josef Villmer. “Special Requirements for Additive Manufacturing of Dental Frameworks.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2016, pp. 15–26. short: 'A. Huxol, F.-J. Villmer, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, 2016, pp. 15–26.' ufg: 'Huxol, Andrea/Villmer, Franz-Josef (2016): Special Requirements for Additive Manufacturing of Dental Frameworks, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, S. 15–26.' van: 'Huxol A, Villmer F-J. Special Requirements for Additive Manufacturing of Dental Frameworks. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. 2016. p. 15–26.' conference: end_date: 2016-09-30 location: Lemgo name: Proceedings 6th International Conference start_date: 2016-09-29 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-01-29T13:37:02Z date_updated: 2023-03-15T13:49:55Z department: - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Additive Manufacturing - Dental frameworks - Quality management - Digital manufacturing language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf oa: '1' page: 15-26 publication: Production Engineering and Management publication_identifier: unknown: - 978-3-946856-00-9 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf status: public title: Special Requirements for Additive Manufacturing of Dental Frameworks type: conference user_id: '45673' year: 2016 ... --- _id: '333' abstract: - lang: eng text: "The annual International Conference on Production Engineering and Management takes place for the sixth time his year, and can therefore be considered a well - established event that is the result of the joint effort of the OWL University of Applied Sciences and the University of Trieste. The conference has been established as an annual meeting under the Double Degree Master Program ‘Production Engineering and Management’ by the two partner universities.\r\nThe main goal of the conference is to provide an opportunity for students, researchers and professionals from Germany, Italy and abroad, to meet and exchange information, discuss experiences, specific practices and technical solutions used in planning, design and management of production and service systems. In addition, the conference is a platform aimed at presenting research projects, introducing young academics to the tradition of \r\nSymposiums and promoting the exchange of ideas between the industry and the academy. Especially the contributions of successful graduates of the Double Degree Master Program ‘Production Engineering and Management’ and those of other postgraduate researchers from several European countries have been enforced. \r\n\r\nThis year’s special focus is on Direct Digital Manufacturing in the context of Industry 4.0, a topic of great interest for the global industry. The concept is spreading, but the actual solutions must be presented in order to highlight \r\nthe practical benefits to industry and customers. Indeed, as Henning Banthien, Secretary General of the German \r\n‘Plattform Industrie 4.0’ project office, has recently remarked, “Industry 4.0 requires a close alliance amongst the private sector, academia, politics and trade unions” in order to be “translated into practice and be implemented now”. \r\nPEM 2016 takes place between September 29 and 30, 2016 at the OWL University of Applied Sciences in Lemgo. The program is defined by the Organizing and Scientific Committees and clustered into scientific sessions \r\ncovering topics of main interest and importance to the participants of the conference. The scientific sessions deal\r\nwith technical and engineering issues, as well as management topics, and include contributions by researchers from academia and industry. The extended abstracts and full papers of the contributions underwent a double -\r\nblind review process. The 24 accepted presentations are assigned, according to their subject, to one of the following sessions: ‘Direct Digital Manufacturing in the Context of Industry 4.0’, ‘Industrial Engineering and Lean Management’, ‘Management Techniques and Methodologies’, ‘Wood Processing Technologies and Furniture Production’ and ‘Innovation Techniques and Methodologies." citation: ama: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2016:304. apa: Villmer, F.-J., Padoano, E., & Department of Production Engineering and Management (Eds.). (2016). Production Engineering and Management (p. 304). Presented at the 6th International Conference, Lemgo. bjps: Villmer F-J, Padoano E and Department of Production Engineering and Management (eds) (2016) Production Engineering and Management. Lemgo. chicago: Villmer, Franz-Josef, Elio Padoano, and Department of Production Engineering and Management, eds. Production Engineering and Management. Schriftenreihe Logistik. Lemgo, 2016. chicago-de: Villmer, Franz-Josef, Elio Padoano und Department of Production Engineering and Management, Hrsg. 2016. Production Engineering and Management. Schriftenreihe Logistik. Lemgo. din1505-2-1: 'Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management, Schriftenreihe Logistik. Lemgo, 2016' havard: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, eds., Production Engineering and Management, Lemgo, 2016. ieee: F.-J. Villmer, E. Padoano, and Department of Production Engineering and Management, Eds., Production Engineering and Management, no. 1. Lemgo, 2016, p. 304. mla: Villmer, Franz-Josef, et al., editors. Production Engineering and Management. no. 1, 2016, p. 304. short: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, eds., Production Engineering and Management, Lemgo, 2016. ufg: 'Villmer, Franz-Josef et. al. (Hgg.) (2016): Production Engineering and Management (=Schriftenreihe Logistik), Lemgo.' van: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2016. (Schriftenreihe Logistik). conference: end_date: 2016-09-30 location: Lemgo name: 6th International Conference start_date: 2016-09-29 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2018-12-11T13:19:40Z date_updated: 2023-03-15T13:49:46Z ddc: - '650' department: - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano file: - access_level: open_access content_type: application/pdf creator: hka-zn8 date_created: 2018-12-11T13:13:14Z date_updated: 2018-12-11T13:13:14Z file_id: '334' file_name: PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf file_size: 11743302 relation: main_file success: 1 file_date_updated: 2018-12-11T13:13:14Z has_accepted_license: '1' issue: '1' language: - iso: eng oa: '1' page: '304' place: Lemgo publication_identifier: isbn: - 978-3-946856-00-9 publication_status: published series_title: Schriftenreihe Logistik status: public title: Production Engineering and Management type: conference_editor user_id: '74222' year: 2016 ... --- _id: '432' abstract: - lang: eng text: "The trend of increasing technological complexity of machines mainly correlates with the integration of additional functions in machines. Increasing functionality \ of the machines leads to an increased number of control \r\nelements, which limits the clarity of the machine operation and leads to higher cognitive demands in the machine operation. Due to the growing functional range of production machines the demand of usability for the operating systems continues to \ grow. The selection and design of icons for the identification of controls \ contributes significantly to usability, especially for intuitive operation of production machines. \r\nThe aim of this study is to investigate the \ intuitive usability of production machines, to consider its use of graphical \ elements (icons) and to derive recommendations for a demand-oriented \ selection and design of icons. To achieve this goal, laboratory studies at five modern production machines (laser sintering machine, CNC universal \ lathe, plastic injection molding machine, laser processing machine, woodworking \ machine) - each with different operating concept - were performed. The results \ of the study show that the used symbols in the examined machines are \ only limited self-explanatory and intuitive, and thus have significant deficits for easy and intuitive operation. Especially the combination of screens and electronic keys or switches was often criticized and leads to uncertainty in the operation. As a result, recommendations for the design of icons on production machines are given. " author: - first_name: Daniel full_name: Riediger, Daniel id: '52263' last_name: Riediger - first_name: Sven full_name: Hinrichsen, Sven id: '49010' last_name: Hinrichsen - first_name: Alexander full_name: Schlee, Alexander id: '48127' last_name: Schlee citation: ama: 'Riediger D, Hinrichsen S, Schlee A. Ergonomic Design of Graphical Control Elements on Production Machines. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo: Hochschule Ostwestfalen-Lippe; 2015:123-130.' apa: 'Riediger, D., Hinrichsen, S., & Schlee, A. (2015). Ergonomic Design of Graphical Control Elements on Production Machines. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management, (Eds.), Production Engineering and Management (pp. 123–130). Lemgo: Hochschule Ostwestfalen-Lippe.' bjps: 'Riediger D, Hinrichsen S and Schlee A (2015) Ergonomic Design of Graphical Control Elements on Production Machines. In Villmer F-J, Padoano E and Department of Production Engineering and Management, (eds), Production Engineering and Management. Lemgo: Hochschule Ostwestfalen-Lippe, pp. 123–130.' chicago: 'Riediger, Daniel, Sven Hinrichsen, and Alexander Schlee. “Ergonomic Design of Graphical Control Elements on Production Machines.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 123–30. Lemgo: Hochschule Ostwestfalen-Lippe, 2015.' chicago-de: 'Riediger, Daniel, Sven Hinrichsen und Alexander Schlee. 2015. Ergonomic Design of Graphical Control Elements on Production Machines. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 123–130. Lemgo: Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Riediger, Daniel ; Hinrichsen, Sven ; Schlee, Alexander: Ergonomic Design of Graphical Control Elements on Production Machines. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management, (Hrsg.): Production Engineering and Management. Lemgo : Hochschule Ostwestfalen-Lippe, 2015, S. 123–130' havard: 'D. Riediger, S. Hinrichsen, A. Schlee, Ergonomic Design of Graphical Control Elements on Production Machines, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, (Eds.), Production Engineering and Management, Hochschule Ostwestfalen-Lippe, Lemgo, 2015: pp. 123–130.' ieee: D. Riediger, S. Hinrichsen, and A. Schlee, “Ergonomic Design of Graphical Control Elements on Production Machines,” in Production Engineering and Management, Trieste, 2015, no. 1, pp. 123–130. mla: Riediger, Daniel, et al. “Ergonomic Design of Graphical Control Elements on Production Machines.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, Hochschule Ostwestfalen-Lippe, 2015, pp. 123–30. short: 'D. Riediger, S. Hinrichsen, A. Schlee, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, (Eds.), Production Engineering and Management, Hochschule Ostwestfalen-Lippe, Lemgo, 2015, pp. 123–130.' ufg: 'Riediger, Daniel et. al. (2015): Ergonomic Design of Graphical Control Elements on Production Machines, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 123–130.' van: 'Riediger D, Hinrichsen S, Schlee A. Ergonomic Design of Graphical Control Elements on Production Machines. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo: Hochschule Ostwestfalen-Lippe; 2015. p. 123–30.' conference: end_date: 2015-10-02 location: Trieste name: Proceedings 5th international conference start_date: 2015-10-01 corporate_editor: - Department of Production Engineering and Management, - Hochschule Ostwestfalen-Lippe date_created: 2019-01-16T16:07:56Z date_updated: 2023-03-15T13:49:52Z department: - _id: DEP7020 - _id: DEP1306 - _id: DEP1305 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Usability - production mach ine - icons - usability - hum an-machine compatibility language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fb7/fileadmin/download/labore/industrialengineering/pdf/Veroeffentlichungen/PEM2015_Ergonomic_Design_of_Graphical_Control_Elements_on_Production_Machines.pdf oa: '1' page: 123-130 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-941645-11-0 publication_status: published publisher: Hochschule Ostwestfalen-Lippe related_material: link: - relation: contains url: https://www.hs-owl.de/fb7/fileadmin/download/labore/industrialengineering/pdf/Veroeffentlichungen/PEM2015_Ergonomic_Design_of_Graphical_Control_Elements_on_Production_Machines.pdf status: public title: Ergonomic Design of Graphical Control Elements on Production Machines type: conference user_id: '45673' year: 2015 ... --- _id: '585' abstract: - lang: eng text: "Many low-cost 3D printers have been brought to market over the last couple of years. Most of them apply a Fused Layer Manufacturing (FLM) process, and have made 3D printing a great success amongst hobbyists, the maker community and students. One drawback of such inexpensive equipment is a limited build envelope, which prevents this from becoming a significant contributor to industrial production. To overcome these limits, it is not sufficient to simply upscale dimensions, but the overall concept of such machines must be completely re-thought, as well as the concepts behind several building blocks, components and the process software system.\r\nProblems such as shrinkage of build material, support material and machine parts in combination with long printer head travels, temperature distribution and moisture effects all have to be solved. In addition, larger parts need longer process times. Therefore, reduction of process times and an increase in productivity are necessary in order to enable economic production.\r\nSome of these problems can be solved by using more than one printer head for production, by using new materials and inventing new nozzle systems as distinct solutions for big printers. Nevertheless, to solve all these problems, the development of special machines for large parts is necessary: not component-wise but as a whole system. Large parts could then be successfully produced in several industries, using large, inexpensive FLMmachines.\r\n" author: - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer - first_name: Lars full_name: Witte, Lars id: '45920' last_name: Witte citation: ama: 'Villmer F-J, Witte L. Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2015:111-122.' apa: 'Villmer, F.-J., & Witte, L. (2015). Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 111–122). Lemgo.' bjps: 'Villmer F-J and Witte L (2015) Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 111–122.' chicago: 'Villmer, Franz-Josef, and Lars Witte. “Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 111–22. Lemgo, 2015.' chicago-de: 'Villmer, Franz-Josef und Lars Witte. 2015. Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 111–122. Lemgo.' din1505-2-1: 'Villmer, Franz-Josef ; Witte, Lars: Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2015, S. 111–122' havard: 'F.-J. Villmer, L. Witte, Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2015: pp. 111–122.' ieee: 'F.-J. Villmer and L. Witte, “Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself,” in Production Engineering and Management, Trieste, Italy, 2015, no. 1, pp. 111–122.' mla: 'Villmer, Franz-Josef, and Lars Witte. “Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2015, pp. 111–22.' short: 'F.-J. Villmer, L. Witte, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2015, pp. 111–122.' ufg: 'Villmer, Franz-Josef/Witte, Lars (2015): Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 111–122.' van: 'Villmer F-J, Witte L. Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2015. p. 111–22.' conference: end_date: 2015-10-02 location: Trieste, Italy name: Proceedings5th International Conference start_date: 2015-10-01 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T14:42:21Z date_updated: 2023-03-15T13:50:02Z department: - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer issue: '1' keyword: - 3D printing - FLM - build envelope - large-scale - thermoplastic polymers language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf oa: '1' page: 111-122 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-941645-11-0 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf status: public title: 'Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself' type: conference user_id: '45673' year: 2015 ... --- _id: '588' abstract: - lang: eng text: "While common measurement techniques like gloss or color measurement are widely used in industry for quality assessment of furniture high gloss surfaces, they indicate only a weak correlation to the quality perceived by the customer. Topography based approaches achieve higher correlation to human perception but are often based on linear measurement which cannot be applied for an overall assessment of larger surfaces. Thus an algorithm was developed to calculate a specific value based on topographic features, such as orange peel, within the research project ‘Development of a comprehensive quality concept for furniture high gloss surfaces’, funded by the federal Ministry of Education and Research. For the evaluation of short waved structures on furniture high gloss surfaces the ratio of hill height to hill area was chosen. This parameter proves to be applicable for an evaluation of the extent of a single.\r\n" author: - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Adrian full_name: Riegel, Adrian id: '14647' last_name: Riegel - first_name: Kerstin full_name: Dekomien, Kerstin id: '59843' last_name: Dekomien citation: ama: 'Huxol A, Riegel A, Dekomien K. Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2015:99-110.' apa: Huxol, A., Riegel, A., & Dekomien, K. (2015). Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 99–110). Lemgo. bjps: Huxol A, Riegel A and Dekomien K (2015) Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 99–110. chicago: Huxol, Andrea, Adrian Riegel, and Kerstin Dekomien. “Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 99–110. Lemgo, 2015. chicago-de: 'Huxol, Andrea, Adrian Riegel und Kerstin Dekomien. 2015. Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 99–110. Lemgo.' din1505-2-1: 'Huxol, Andrea ; Riegel, Adrian ; Dekomien, Kerstin: Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2015, S. 99–110' havard: 'A. Huxol, A. Riegel, K. Dekomien, Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2015: pp. 99–110.' ieee: A. Huxol, A. Riegel, and K. Dekomien, “Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception,” in Production Engineering and Management, Trieste, Italy, 2015, no. 1, pp. 99–110. mla: Huxol, Andrea, et al. “Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2015, pp. 99–110. short: 'A. Huxol, A. Riegel, K. Dekomien, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2015, pp. 99–110.' ufg: 'Huxol, Andrea et. al. (2015): Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 99–110.' van: 'Huxol A, Riegel A, Dekomien K. Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2015. p. 99–110.' conference: end_date: 2015-10-02 location: Trieste, Italy name: Proceedings5th International Conference start_date: 2015-10-01 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T15:13:34Z date_updated: 2023-03-15T13:50:02Z department: - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer issue: '1' keyword: - High gloss - surface measurement - topographic features - quality assessment language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf oa: '1' page: 99-110 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-941645-11-0 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf status: public title: Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception type: conference user_id: '45673' year: 2015 ... --- _id: '597' abstract: - lang: eng text: "This paper is aimed to discuss current research using data mining techniques and industry statistics in production environments. The general research approach is based on the idea of using data mining processes and techniques of industry statistics to find rare and hidden patterns behind failures of complex components. A case study will be applied to illustrate how the technique is carried out and where the limits of this approach occur. The case study deals with a component supplier of printing machines, which received an increasing number of client complaints, all related to one distinct problem. The observed failures seem to occur only among clients with very high quality standards. The affected component undergoes a very complex production process with several steps in different departments. Every single production unit records data information from multiple process variables and at different points in time. In the beginning there was no understanding of the failure causes in production at all. Therefore a huge amount of production data had to be analyzed to find the pattern that discloses the failure.\r\nThe data mining process starts with a first step in which the given data sets are prepared and then cleaned. Followed up by building a prediction model. The aim is to detect the root causes for failures and to predict potential failures in affected components. This paper shows how to use data mining to get the answer on pressing production failures.\r\n" author: - first_name: Eva full_name: Scheideler, Eva id: '61522' last_name: Scheideler - first_name: Andrea full_name: Ahlemeyer-Stubbe, Andrea last_name: Ahlemeyer-Stubbe citation: ama: 'Scheideler E, Ahlemeyer-Stubbe A. Data Mining: A Potential Detector to Find Failure in Complex Components. In: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy. Hochschule Ostwestfalen-Lippe; 2015:163-174.' apa: 'Scheideler, E., & Ahlemeyer-Stubbe, A. (2015). Data Mining: A Potential Detector to Find Failure in Complex Components. In E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe (Eds.), Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy (Issue 1, pp. 163–174). Hochschule Ostwestfalen-Lippe.' bjps: 'Scheideler E and Ahlemeyer-Stubbe A (2015) Data Mining: A Potential Detector to Find Failure in Complex Components. In Padoano E et al. (eds), Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy. Lemgo: Hochschule Ostwestfalen-Lippe, pp. 163–174.' chicago: 'Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Data Mining: A Potential Detector to Find Failure in Complex Components.” In Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy, edited by Elio Padoano, Franz-Josef Villmer, Department of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, 163–74. Lemgo: Hochschule Ostwestfalen-Lippe, 2015.' chicago-de: 'Scheideler, Eva und Andrea Ahlemeyer-Stubbe. 2015. Data Mining: A Potential Detector to Find Failure in Complex Components. In: Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy, hg. von Elio Padoano, Franz-Josef Villmer, Department of Production Engineering and Management, und Hochschule Ostwestfalen-Lippe, 163–174. Lemgo: Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Scheideler, Eva ; Ahlemeyer-Stubbe, Andrea: Data Mining: A Potential Detector to Find Failure in Complex Components. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management ; Hochschule Ostwestfalen-Lippe (Hrsg.): Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy. Lemgo : Hochschule Ostwestfalen-Lippe, 2015, S. 163–174' havard: 'E. Scheideler, A. Ahlemeyer-Stubbe, Data Mining: A Potential Detector to Find Failure in Complex Components, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy, Hochschule Ostwestfalen-Lippe, Lemgo, 2015: pp. 163–174.' ieee: 'E. Scheideler and A. Ahlemeyer-Stubbe, “Data Mining: A Potential Detector to Find Failure in Complex Components,” in Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy, Trieste, Italy, 2015, no. 1, pp. 163–174.' mla: 'Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Data Mining: A Potential Detector to Find Failure in Complex Components.” Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy, edited by Elio Padoano et al., no. 1, Hochschule Ostwestfalen-Lippe, 2015, pp. 163–74.' short: 'E. Scheideler, A. Ahlemeyer-Stubbe, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy, Hochschule Ostwestfalen-Lippe, Lemgo, 2015, pp. 163–174.' ufg: 'Scheideler, Eva/Ahlemeyer-Stubbe, Andrea: Data Mining: A Potential Detector to Find Failure in Complex Components, in: Padoano, Elio u. a. (Hgg.): Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy, Lemgo 2015,  S. 163–174.' van: 'Scheideler E, Ahlemeyer-Stubbe A. Data Mining: A Potential Detector to Find Failure in Complex Components. In: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, editors. Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy. Lemgo: Hochschule Ostwestfalen-Lippe; 2015. p. 163–74.' conference: end_date: 2015-10-02 location: Trieste, Italy name: '5th International Conference "Production Engineering and Management" ' start_date: 2015-10-01 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-19T07:15:57Z date_updated: 2024-03-22T13:12:47Z department: - _id: DEP7000 - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer issue: '1' keyword: - Data mining - production failure - multi-variant analysis - multivariate process control - predictive modelling - case study language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf oa: '1' page: 163-174 place: Lemgo publication: 'Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy' publication_identifier: isbn: - 978-3-941645-11-0 publication_status: published publisher: Hochschule Ostwestfalen-Lippe related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf status: public title: 'Data Mining: A Potential Detector to Find Failure in Complex Components' type: conference user_id: '83781' year: '2015' ... --- _id: '598' abstract: - lang: eng text: "The aerospace sector is characterized by long product life cycles and a need for lightweight design. Additive manufacturing is a technology that produces parts layer by layer and thus enables the manufacturing of any complex parts at nearly no extra costs. A topology optimization enhances the part’s\r\nperformance for their special purpose. The results are often complex bionic structures that cannot be produced with conventional manufacturing technologies. The paper analyzes how the high potential of this technologycan be applied to aerospace parts. A topology optimization will be conducted for an aircraft part explaining the crucial points and a life cycle analysis examines the achieved sustainable improvements for the aircraft’s life cycle.\r\n" author: - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: 'Huxol A, Villmer F-J. Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2015:207-218.' apa: 'Huxol, A., & Villmer, F.-J. (2015). Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 207–218). Lemgo.' bjps: 'Huxol A and Villmer F-J (2015) Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 207–218.' chicago: 'Huxol, Andrea, and Franz-Josef Villmer. “Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 207–18. Lemgo, 2015.' chicago-de: 'Huxol, Andrea und Franz-Josef Villmer. 2015. Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 207–218. Lemgo.' din1505-2-1: 'Huxol, Andrea ; Villmer, Franz-Josef: Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2015, S. 207–218' havard: 'A. Huxol, F.-J. Villmer, Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2015: pp. 207–218.' ieee: 'A. Huxol and F.-J. Villmer, “Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies,” in Production Engineering and Management, Trieste, Italy, 2015, no. 1, pp. 207–218.' mla: 'Huxol, Andrea, and Franz-Josef Villmer. “Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2015, pp. 207–18.' short: 'A. Huxol, F.-J. Villmer, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2015, pp. 207–218.' ufg: 'Huxol, Andrea/Villmer, Franz-Josef (2015): Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 207–218.' van: 'Huxol A, Villmer F-J. Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2015. p. 207–18.' conference: end_date: 2015-10-02 location: Trieste, Italy name: Proceedings5th International Conference start_date: 2015-10-01 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-19T07:26:35Z date_updated: 2023-03-15T13:50:03Z department: - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer issue: '1' keyword: - Additive manufacturing - topology optimization - aerospace - life cycle costs language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf oa: '1' page: 207-218 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-941645-11-0 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf status: public title: 'Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies' type: conference user_id: '45673' year: 2015 ... --- _id: '599' abstract: - lang: eng text: "Order picking has long been identified as the most labor costly and intensively activity in warehouse management. The orders from the customers need to be fulfilled tightly and timely. In order to keep the required high service level, the warehouse has to increase the picking productivity under the constraints of limited capacity. This paper concerns a man-togoods order picking system, in which the order pickers have to drive with a pallet jack to the storage locations. Considering that the orders are mostly small orders which consist of less lines, it is efficient to combine severalsingle customer orders into one picking order. Under this circumstance, this paper intends to answer the question of how customer orders should be grouped into picking orders with the aim of minimizing the total travel length through the warehouse. Consequently the productivity of the order picking system can be improved. An optimization problem for order batching is introduced. The optimization method of order batching is then proposed. Based on the simulation of different scenarios of incoming orders, it can be concluded that the developed method is effective in improving the productivity of the concerned order picking system.\r\n" author: - first_name: Li full_name: Li, Li id: '58482' last_name: Li - first_name: L. full_name: Schulze, L. last_name: Schulze citation: ama: 'Li L, Schulze L. Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2015:319-326.' apa: Li, L., & Schulze, L. (2015). Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 319–326). Lemgo. bjps: Li L and Schulze L (2015) Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 319–326. chicago: Li, Li, and L. Schulze. “Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 319–26. Lemgo, 2015. chicago-de: 'Li, Li und L. Schulze. 2015. Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 319–326. Lemgo.' din1505-2-1: 'Li, Li ; Schulze, L.: Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2015, S. 319–326' havard: 'L. Li, L. Schulze, Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2015: pp. 319–326.' ieee: L. Li and L. Schulze, “Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching,” in Production Engineering and Management, Trieste, Italy, 2015, no. 1, pp. 319–326. mla: Li, Li, and L. Schulze. “Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2015, pp. 319–26. short: 'L. Li, L. Schulze, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2015, pp. 319–326.' ufg: 'Li, Li/Schulze, L. (2015): Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 319–326.' van: 'Li L, Schulze L. Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2015. p. 319–26.' conference: end_date: 2015-10-02 location: Trieste, Italy name: Proceedings5th International Conference start_date: 2015-10-01 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-19T07:34:56Z date_updated: 2023-03-15T13:50:03Z department: - _id: DEP7000 - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer issue: '1' keyword: - Order picking - man-to-goods - order batching - picking productivity - genetic algorithm language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf oa: '1' page: 319-326 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-941645-11-0 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf status: public title: Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching type: conference user_id: '45673' year: 2015 ... --- _id: '335' abstract: - lang: eng text: "The University of Trieste (Università degli Studi di Trieste) and the Ostwestfalen-Lippe University of Applied Sciences introduced the International Double Degree Master Program ‘Production Engineering and Management’ in 2011. Its aim is to give students in Italy and Germany, along with other countries, the chance to learn the necessary abilities from lecturers and each other. This Master Program has been accompanied by the International Conference ‘Production Engineering and Management’ from the very beginning. The annual International Conference on Production Engineering and Management took place for the fifth time this year, and can therefore be considered a well-established event originating from the partnership between the University of Trieste (Italy) and the Ostwestfalen-Lippe \r\nUniversity of Applied Sciences (Germany). The main aim of the five conferences has been to bridge the gap between production engineering and management theory and practice, by offering a platform where academia and industry could discuss practical and pressing questions. In this respect, the fifth conference (PEM 2015) continues along the same path of the first four successful conferences, which were held in Pordenone (2011), Lemgo (2012), Trieste (2013) and again in Lemgo (2014). PEM 2015 benefited further from contributions from other universities and from research and industry projects. Especially the contributions of successful graduates of the double degree Master’s program Production Engineering and Management and those of other postgraduate researchers from several European count ries have been enforced in this year. The title ‘An active interaction between university and industry’ introduced two years ago to emphasize lively cooperation proved to be more than appropriate in the conference’s main orientation:\r\n\r\n•\tTo present current research projects and their results at a highly sophisticated scientific level\r\n•\tTo discuss recent developments in industry and society\r\n•\tTo bring professionals, specialists and students together\r\n•\tTo enable professionals, lecturers and professors to exchange experiences\r\n•\tTo familiarize young professionals and students with scientific conference procedures\r\n•\tTo give postgraduate and Ph.D. students the chance to present a paper\r\n•\tTo show the two partner regions’ uniqueness and performance\r\n•\tTo attract students for an international career in the industry\r\n•\tTo encourage students to be open-minded about different cultures, mentalities and manners\r\n\r\nPEM 2015 took place between October 1 and 2, 2015 at the University of \r\nTrieste. The program was defined by the Organizing and Scientific Committees and clustered into five scientific sessions. Both universities and their partner organizations debated on these topics by reporting their research, experiences and success stories. The scientific sessions dealt with technical and engineering issues, as well as management topics, and included contributions by researchers from academia and industry. The extended abstracts and full papers of the \r\ncontributions underwent a double-blind review process. The 35 accepted presentations were assigned, according to their subject, to one of the following sessions:, ‘Industrial Engineering and Lean Management’, ‘Technology and Supporting Services for Manufacturing’, ‘Product Lifecycle, from Concept to Market and Use’, ‘Supply Chain Design and Management’ and ‘Management Practices and Methodologies’. These sessions have been carefully selected by the organizing and scientific committees and are aimed at highlighting some of the current production industry’s most discussed topics. Therefore, the articles sustainability and revolutionary developments in modern industry and cover not only production in a narrower sense, but also new aspects of: innovation and \r\nproduct development, of supply chains, of quality improvement. The proceedings have been drawn together to form 35 full papers of the scientific contributions. The articles were reviewed by the Scientific Committee before being accepted. \r\nAs the editors of the proceedings, we would like to thank all contributors, the \r\nreferees who accepted the burden of reviewing the abstracts as well as the full papers and the members of the Organizing Committee and Scientific Committee for planning such an effective conference." citation: ama: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management. Vol 11.; 2015:418. apa: Padoano, E., Villmer, F.-J., Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe (Eds.). (2015). Production Engineering and Management (Vol. 11, Issue ., p. 418). bjps: Padoano E et al. (eds) (2015) Production Engineering and Management. Lemgo. chicago: Padoano, Elio, Franz-Josef Villmer, Department of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management. Vol. 11. Schriftenreihe Logistik. Lemgo, 2015. chicago-de: Padoano, Elio, Franz-Josef Villmer, Department of Production Engineering and Management, und Hochschule Ostwestfalen-Lippe, Hrsg. 2015. Production Engineering and Management. Bd. 11. Schriftenreihe Logistik. Lemgo. din1505-2-1: 'Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management ; Hochschule Ostwestfalen-Lippe (Hrsg.): Production Engineering and Management, Schriftenreihe Logistik. Bd. 11. Lemgo, 2015' havard: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds., Production Engineering and Management, Lemgo, 2015. ieee: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, Eds., Production Engineering and Management, vol. 11, no. . Lemgo, 2015, p. 418. mla: Padoano, Elio, et al., editors. Production Engineering and Management. no. ., 2015, p. 418. short: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds., Production Engineering and Management, Lemgo, 2015. ufg: 'Padoano, Elio u. a.: Production Engineering and Management, Bd. 11, Lemgo 2015 (Schriftenreihe Logistik).' van: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, editors. Production Engineering and Management. Lemgo; 2015. (Schriftenreihe Logistik; vol. 11). conference: end_date: 2010-10-02 location: Trieste, Italy name: 5th International Conference start_date: 2015-10-01 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2018-12-11T13:32:50Z date_updated: 2025-04-11T09:06:38Z ddc: - '650' department: - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer file: - access_level: open_access content_type: application/pdf creator: hka-zn8 date_created: 2018-12-11T13:27:43Z date_updated: 2018-12-11T13:27:43Z file_id: '336' file_name: PEM_Tagung_zusammen2015.pdf file_size: 12169441 relation: main_file success: 1 file_date_updated: 2018-12-11T13:27:43Z has_accepted_license: '1' intvolume: ' 11' issue: . language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf oa: '1' page: '418' place: Lemgo publication_identifier: isbn: - 978-3-941645-11-0 publication_status: published series_title: Schriftenreihe Logistik status: public title: Production Engineering and Management type: conference_editor user_id: '83781' volume: 11 year: '2015' ... --- _id: '589' citation: ama: Villmer F-J, Padoano E, Production Engineering and Management, eds. Production Engineering and Management. Vol 10. Lemgo; 2014:301. apa: Villmer, F.-J., Padoano, E., & Production Engineering and Management (Eds.). (2014). Production Engineering and Management (Vol. 10, p. 301). Presented at the 4th International Conference, Lemgo. bjps: Villmer F-J, Padoano E and Production Engineering and Management (eds) (2014) Production Engineering and Management. Lemgo. chicago: Villmer, Franz-Josef, Elio Padoano, and Production Engineering and Management, eds. Production Engineering and Management. Vol. 10. Schriftenreihe Logistik. Lemgo, 2014. chicago-de: Villmer, Franz-Josef, Elio Padoano und Production Engineering and Management, Hrsg. 2014. Production Engineering and Management. Bd. 10. Schriftenreihe Logistik. Lemgo. din1505-2-1: 'Villmer, F.-J. ; Padoano, E. ; Production Engineering and Management (Hrsg.): Production Engineering and Management, Schriftenreihe Logistik. Bd. 10. Lemgo, 2014' havard: F.-J. Villmer, E. Padoano, Production Engineering and Management, eds., Production Engineering and Management, Lemgo, 2014. ieee: F.-J. Villmer, E. Padoano, and Production Engineering and Management, Eds., Production Engineering and Management, vol. 10. Lemgo, 2014, p. 301. mla: Villmer, Franz-Josef, et al., editors. Production Engineering and Management. Vol. 10, 2014, p. 301. short: F.-J. Villmer, E. Padoano, Production Engineering and Management, eds., Production Engineering and Management, Lemgo, 2014. ufg: 'Villmer, Franz-Josef et. al. (Hgg.) (2014): Production Engineering and Management (=Schriftenreihe Logistik 10), Lemgo.' van: Villmer F-J, Padoano E, Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2014. (Schriftenreihe Logistik; vol. 10). conference: end_date: 2014-09-26 location: Lemgo name: 4th International Conference start_date: 2014-09-25 corporate_editor: - Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T15:12:28Z date_updated: 2023-03-15T13:50:02Z ddc: - '650' department: - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano file: - access_level: open_access content_type: application/pdf creator: hka-zn8 date_created: 2019-03-13T08:33:58Z date_updated: 2019-03-13T08:33:58Z file_id: '724' file_name: PEM 2014_Proceeding_V04.pdf file_size: 8527360 relation: main_file success: 1 file_date_updated: 2019-03-13T08:33:58Z has_accepted_license: '1' intvolume: ' 10' language: - iso: eng oa: '1' page: '301' place: Lemgo publication_identifier: isbn: - 978-3-941645-10-3 publication_status: published related_material: link: - relation: table_of_contents url: https://d-nb.info/1063109302/04 series_title: Schriftenreihe Logistik status: public title: Production Engineering and Management type: conference_editor user_id: '45673' volume: 10 year: 2014 ... --- _id: '725' citation: ama: Padoano E, Villmer F-J, Production Engineering and Management, eds. Production Engineering and Management. Vol 9. Lemgo; 2013:282. apa: Padoano, E., Villmer, F.-J., & Production Engineering and Management (Eds.). (2013). Production Engineering and Management (Vol. 9, p. 282). Presented at the 3th international conference, Lemgo. bjps: Padoano E, Villmer F-J and Production Engineering and Management (eds) (2013) Production Engineering and Management. Lemgo. chicago: Padoano, Elio, Franz-Josef Villmer, and Production Engineering and Management, eds. Production Engineering and Management. Vol. 9. Schriftenreihe Logistik. Lemgo, 2013. chicago-de: Padoano, Elio, Franz-Josef Villmer und Production Engineering and Management, Hrsg. 2013. Production Engineering and Management. Bd. 9. Schriftenreihe Logistik. Lemgo. din1505-2-1: 'Padoano, E. ; Villmer, F.-J. ; Production Engineering and Management (Hrsg.): Production Engineering and Management, Schriftenreihe Logistik. Bd. 9. Lemgo, 2013' havard: E. Padoano, F.-J. Villmer, Production Engineering and Management, eds., Production Engineering and Management, Lemgo, 2013. ieee: E. Padoano, F.-J. Villmer, and Production Engineering and Management, Eds., Production Engineering and Management, vol. 9. Lemgo, 2013, p. 282. mla: Padoano, Elio, et al., editors. Production Engineering and Management. Vol. 9, 2013, p. 282. short: E. Padoano, F.-J. Villmer, Production Engineering and Management, eds., Production Engineering and Management, Lemgo, 2013. ufg: 'Padoano, Elio et. al. (Hgg.) (2013): Production Engineering and Management (=Schriftenreihe Logistik 9), Lemgo.' van: Padoano E, Villmer F-J, Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2013. (Schriftenreihe Logistik; vol. 9). conference: end_date: 2013-09-27 location: Trieste, Italy name: 3th international conference start_date: 2013-09-26 corporate_editor: - Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T15:12:28Z date_updated: 2023-03-15T13:50:09Z ddc: - '650' department: - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer file: - access_level: open_access content_type: application/pdf creator: hka-zn8 date_created: 2019-03-13T08:38:52Z date_updated: 2019-03-13T08:38:52Z file_id: '726' file_name: PEM 2013_Proceedings_Druckversion.pdf file_size: 8969103 relation: main_file success: 1 file_date_updated: 2019-03-13T08:38:52Z has_accepted_license: '1' intvolume: ' 9' language: - iso: eng oa: '1' page: '282' place: Lemgo publication_identifier: isbn: - 978-3-941645-09-7 publication_status: published series_title: Schriftenreihe Logistik status: public title: Production Engineering and Management type: conference_editor user_id: '45673' volume: 9 year: 2013 ...