--- _id: '580' abstract: - lang: eng text: Additive Manufacturing (AM) is increasingly used to design new products. This is possible due to the further development of the AM-processes and materials. The lack of quality assurance of AM built parts is a key technological barrier that prevents manufacturers from adopting. The quality of an additive manufactured part is influenced by more than 50 parameters, which make process control difficult. Current research deals with using real time monitoring of the melt pool as feedback control for laser power. This paper illustrates challenges and opportunities of applying statistical predictive modeling and unsupervised learning to control additive manufacturing. In particular, an approach how to build a feedforward controller will be discussed. author: - first_name: Eva full_name: Scheideler, Eva id: '61522' last_name: Scheideler - first_name: Andrea full_name: Ahlemeyer-Stubbe, Andrea last_name: Ahlemeyer-Stubbe citation: ama: 'Scheideler E, Ahlemeyer-Stubbe A. Quality Control of Additive Manufacturing Using Statistical Prediction Models. In: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds.   Production Engineering and Management : Proceedings 7th International Conference, September 28 and 29, 2017, Pordenone, Italy . Vol 2017.   Publication series in direct digital manufacturing . ; 2017:3-12.' apa: 'Scheideler, E., & Ahlemeyer-Stubbe, A. (2017). Quality Control of Additive Manufacturing Using Statistical Prediction Models. In E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe (Eds.),   Production engineering and management : proceedings 7th international conference, September 28 and 29, 2017, Pordenone, Italy (Vol. 2017, Issue 1, pp. 3–12).' bjps: 'Scheideler E and Ahlemeyer-Stubbe A (2017) Quality Control of Additive Manufacturing Using Statistical Prediction Models. In Padoano E et al. (eds),   Production Engineering and Management : Proceedings 7th International Conference, September 28 and 29, 2017, Pordenone, Italy , vol. 2017. Lemgo, pp. 3–12.' chicago: 'Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Quality Control of Additive Manufacturing Using Statistical Prediction Models.” In   Production Engineering and Management : Proceedings 7th International Conference, September 28 and 29, 2017, Pordenone, Italy , edited by Elio Padoano, Franz-Josef Villmer, Department of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, 2017:3–12.   Publication Series in Direct Digital Manufacturing . Lemgo, 2017.' chicago-de: 'Scheideler, Eva und Andrea Ahlemeyer-Stubbe. 2017. Quality Control of Additive Manufacturing Using Statistical Prediction Models. In:   Production engineering and management : proceedings 7th international conference, September 28 and 29, 2017, Pordenone, Italy , hg. von Elio Padoano, Franz-Josef Villmer, Department of Production Engineering and Management, und Hochschule Ostwestfalen-Lippe, 2017:3–12.   Publication series in direct digital manufacturing . Lemgo.' din1505-2-1: 'Scheideler, Eva ; Ahlemeyer-Stubbe, Andrea: Quality Control of Additive Manufacturing Using Statistical Prediction Models. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management ; Hochschule Ostwestfalen-Lippe (Hrsg.):   Production engineering and management : proceedings 7th international conference, September 28 and 29, 2017, Pordenone, Italy ,   Publication series in direct digital manufacturing . Bd. 2017. Lemgo, 2017, S. 3–12' havard: 'E. Scheideler, A. Ahlemeyer-Stubbe, Quality Control of Additive Manufacturing Using Statistical Prediction Models, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.),   Production Engineering and Management : Proceedings 7th International Conference, September 28 and 29, 2017, Pordenone, Italy , Lemgo, 2017: pp. 3–12.' ieee: 'E. Scheideler and A. Ahlemeyer-Stubbe, “Quality Control of Additive Manufacturing Using Statistical Prediction Models,” in   Production engineering and management : proceedings 7th international conference, September 28 and 29, 2017, Pordenone, Italy , Pordenone, Italy, 2017, vol. 2017, no. 1, pp. 3–12.' mla: 'Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Quality Control of Additive Manufacturing Using Statistical Prediction Models.”   Production Engineering and Management : Proceedings 7th International Conference, September 28 and 29, 2017, Pordenone, Italy , edited by Elio Padoano et al., vol. 2017, no. 1, 2017, pp. 3–12.' short: 'E. Scheideler, A. Ahlemeyer-Stubbe, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.),   Production Engineering and Management : Proceedings 7th International Conference, September 28 and 29, 2017, Pordenone, Italy , Lemgo, 2017, pp. 3–12.' ufg: 'Scheideler, Eva/Ahlemeyer-Stubbe, Andrea: Quality Control of Additive Manufacturing Using Statistical Prediction Models, in: Padoano, Elio u. a. (Hgg.):   Production engineering and management : proceedings 7th international conference, September 28 and 29, 2017, Pordenone, Italy , Bd. 2017, Lemgo 2017 (  Publication series in direct digital manufacturing ),  S. 3–12.' van: 'Scheideler E, Ahlemeyer-Stubbe A. Quality Control of Additive Manufacturing Using Statistical Prediction Models. In: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, editors.   Production engineering and management : proceedings 7th international conference, September 28 and 29, 2017, Pordenone, Italy . Lemgo; 2017. p. 3–12. (  Publication series in direct digital manufacturing ; vol. 2017).' conference: end_date: 2017-09-29 location: Pordenone, Italy name: 7th International Conference on Production Engineering and Management start_date: 2017-09-28 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T11:34:36Z date_updated: 2024-03-22T13:19:02Z department: - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer intvolume: ' 2017' issue: '1' keyword: - Additive manufacturing - Process control - Predictive modeling - Predictive control language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf oa: '1' page: 3-12 place: Lemgo publication: "\t Production engineering and management : proceedings 7th international conference, September 28 and 29, 2017, Pordenone, Italy " publication_identifier: isbn: - 978-3-946856-01-6 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf series_title: "\t Publication series in direct digital manufacturing " status: public title: Quality Control of Additive Manufacturing Using Statistical Prediction Models type: conference user_id: '83781' volume: 2017 year: '2017' ... --- _id: '581' author: - first_name: Eva full_name: Scheideler, Eva id: '61522' last_name: Scheideler - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: 'Scheideler E, Villmer F-J. Anforderungen an integrierte Prozessketten in der Additiven Fertigung. In: Rapid.Tech – International Trade Show & Conference for Additive Manufacturing. München: Carl Hanser Verlag GmbH & Co. KG; 2017:10-24. doi:10.3139/9783446454606.001' apa: 'Scheideler, E., & Villmer, F.-J. (2017). Anforderungen an integrierte Prozessketten in der Additiven Fertigung. In Rapid.Tech – International Trade Show & Conference for Additive Manufacturing (pp. 10–24). München: Carl Hanser Verlag GmbH & Co. KG. https://doi.org/10.3139/9783446454606.001' bjps: 'Scheideler E and Villmer F-J (2017) Anforderungen an Integrierte Prozessketten in Der Additiven Fertigung. Rapid.Tech – International Trade Show & Conference for Additive Manufacturing. München: Carl Hanser Verlag GmbH & Co. KG, pp. 10–24.' chicago: 'Scheideler, Eva, and Franz-Josef Villmer. “Anforderungen an Integrierte Prozessketten in Der Additiven Fertigung.” In Rapid.Tech – International Trade Show & Conference for Additive Manufacturing, 10–24. München: Carl Hanser Verlag GmbH & Co. KG, 2017. https://doi.org/10.3139/9783446454606.001.' chicago-de: 'Scheideler, Eva und Franz-Josef Villmer. 2017. Anforderungen an integrierte Prozessketten in der Additiven Fertigung. In: Rapid.Tech – International Trade Show & Conference for Additive Manufacturing, 10–24. München: Carl Hanser Verlag GmbH & Co. KG. doi:10.3139/9783446454606.001, .' din1505-2-1: 'Scheideler, Eva ; Villmer, Franz-Josef: Anforderungen an integrierte Prozessketten in der Additiven Fertigung. In: Rapid.Tech – International Trade Show & Conference for Additive Manufacturing. München : Carl Hanser Verlag GmbH & Co. KG, 2017, S. 10–24' havard: 'E. Scheideler, F.-J. Villmer, Anforderungen an integrierte Prozessketten in der Additiven Fertigung, in: Rapid.Tech – International Trade Show & Conference for Additive Manufacturing, Carl Hanser Verlag GmbH & Co. KG, München, 2017: pp. 10–24.' ieee: E. Scheideler and F.-J. Villmer, “Anforderungen an integrierte Prozessketten in der Additiven Fertigung,” in Rapid.Tech – International Trade Show & Conference for Additive Manufacturing, 2017, no. 1, pp. 10–24. mla: Scheideler, Eva, and Franz-Josef Villmer. “Anforderungen an Integrierte Prozessketten in Der Additiven Fertigung.” Rapid.Tech – International Trade Show & Conference for Additive Manufacturing, no. 1, Carl Hanser Verlag GmbH & Co. KG, 2017, pp. 10–24, doi:10.3139/9783446454606.001. short: 'E. Scheideler, F.-J. Villmer, in: Rapid.Tech – International Trade Show & Conference for Additive Manufacturing, Carl Hanser Verlag GmbH & Co. KG, München, 2017, pp. 10–24.' ufg: 'Scheideler, Eva/Villmer, Franz-Josef (2017): Anforderungen an integrierte Prozessketten in der Additiven Fertigung, in: Rapid.Tech – International Trade Show & Conference for Additive Manufacturing, München, S. 10–24.' van: 'Scheideler E, Villmer F-J. Anforderungen an integrierte Prozessketten in der Additiven Fertigung. In: RapidTech – International Trade Show & Conference for Additive Manufacturing. München: Carl Hanser Verlag GmbH & Co. KG; 2017. p. 10–24.' date_created: 2019-02-18T13:02:40Z date_updated: 2023-03-15T13:50:02Z department: - _id: DEP1306 doi: 10.3139/9783446454606.001 issue: '1' language: - iso: eng main_file_link: - url: https://www.hanser-elibrary.com/doi/pdf/10.3139/9783446454606.001 page: 10-24 place: München publication: Rapid.Tech – International Trade Show & Conference for Additive Manufacturing publication_identifier: isbn: - 978-3-44645459-0 - 978-3-44645460-6 publication_status: published publisher: Carl Hanser Verlag GmbH & Co. KG related_material: link: - relation: contains url: https://www.hanser-elibrary.com/doi/pdf/10.3139/9783446454606.001 - relation: supplementary_material url: https://www.hs-owl.de/fb7/fileadmin/download/labore/konstruktion/06_Tagungen/01_RP_Tagungen/22_RP/Scheideler_DiMan.pdf status: public title: Anforderungen an integrierte Prozessketten in der Additiven Fertigung type: conference user_id: '45673' year: 2017 ... --- _id: '609' abstract: - lang: ger text: Einfach, ohne Expertenwissen anzuwenden – solch ein Planungswerkzeug spart Zeit und Geld. Dieser Artikel stellt eine neue, effiziente Berechnungsmöglichkeit vor, die z.B. Vertriebsmitarbeiter oder Architekten befähigt, Risiken bezüglich Durch‐ oder Absturzsicherheit bei allseitig gelagerten Verglasungen früh in der Planung schnell abzuprüfen. Dabei werden statistische Modelle und Simulationsberechnungen eingesetzt. Verifiziert wurde die Methode gemäß DIN 18008 Teil 4 und Teil 6 mit den Möglichkeiten der Finite‐Element‐Rechnung und Referenzdatensätzen. Sie kann eine finale statische Beurteilung (z.B. prüffähige Statik) nicht ersetzen, doch sie kann im Lauf der Planung verlässliche Abschätzungen liefern und somit Geld und Zeit einsparen. author: - first_name: Eva full_name: Scheideler, Eva id: '61522' last_name: Scheideler - first_name: Andrea full_name: Ahlemeyer-Stubbe, Andrea last_name: Ahlemeyer-Stubbe - first_name: Josef full_name: Scheideler, Josef last_name: Scheideler citation: ama: 'Scheideler E, Ahlemeyer-Stubbe A, Scheideler J. Statistische Modellierung zur Unterstützung von Industrie 4.0 im Glasbau. ce/papers : Proceedings in Civil Engineering. 2017;1(1):142-152. doi:10.1002/cepa.16' apa: 'Scheideler, E., Ahlemeyer-Stubbe, A., & Scheideler, J. (2017). Statistische Modellierung zur Unterstützung von Industrie 4.0 im Glasbau. ce/papers : Proceedings in Civil Engineering, 1(1), 142–152. https://doi.org/10.1002/cepa.16' bjps: 'Scheideler E, Ahlemeyer-Stubbe A and Scheideler J (2017) Statistische Modellierung zur Unterstützung von Industrie 4.0 im Glasbau. ce/papers : Proceedings in Civil Engineering 1, 142–152.' chicago: 'Scheideler, Eva, Andrea Ahlemeyer-Stubbe, and Josef Scheideler. “Statistische Modellierung zur Unterstützung von Industrie 4.0 im Glasbau.” ce/papers : Proceedings in Civil Engineering 1, no. 1 (2017): 142–52. https://doi.org/10.1002/cepa.16.' chicago-de: 'Scheideler, Eva, Andrea Ahlemeyer-Stubbe und Josef Scheideler. 2017. Statistische Modellierung zur Unterstützung von Industrie 4.0 im Glasbau. ce/papers : Proceedings in Civil Engineering 1, Nr. 1: 142–152. doi:10.1002/cepa.16, .' din1505-2-1: 'Scheideler, Eva ; Ahlemeyer-Stubbe, Andrea ; Scheideler, Josef: Statistische Modellierung zur Unterstützung von Industrie 4.0 im Glasbau. In: ce/papers : Proceedings in Civil Engineering Bd. 1, Ernst & Sohn, a Wiley brand (2017), Nr. 1, S. 142–152' havard: 'E. Scheideler, A. Ahlemeyer-Stubbe, J. Scheideler, Statistische Modellierung zur Unterstützung von Industrie 4.0 im Glasbau, ce/papers : Proceedings in Civil Engineering. 1 (2017) 142–152.' ieee: 'E. Scheideler, A. Ahlemeyer-Stubbe, and J. Scheideler, “Statistische Modellierung zur Unterstützung von Industrie 4.0 im Glasbau,” ce/papers : Proceedings in Civil Engineering, vol. 1, no. 1, pp. 142–152, 2017, doi: 10.1002/cepa.16.' mla: 'Scheideler, Eva, et al. “Statistische Modellierung zur Unterstützung von Industrie 4.0 im Glasbau.” ce/papers : Proceedings in Civil Engineering, vol. 1, no. 1, 2017, pp. 142–52, https://doi.org/10.1002/cepa.16.' short: 'E. Scheideler, A. Ahlemeyer-Stubbe, J. Scheideler, ce/papers : Proceedings in Civil Engineering 1 (2017) 142–152.' ufg: 'Scheideler, Eva/Ahlemeyer-Stubbe, Andrea/Scheideler, Josef: Statistische Modellierung zur Unterstützung von Industrie 4.0 im Glasbau, in: ce/papers : Proceedings in Civil Engineering 1 (2017), H. 1,  S. 142–152.' van: 'Scheideler E, Ahlemeyer-Stubbe A, Scheideler J. Statistische Modellierung zur Unterstützung von Industrie 4.0 im Glasbau. ce/papers : Proceedings in Civil Engineering. 2017;1(1):142–52.' date_created: 2019-02-21T16:16:43Z date_updated: 2024-03-22T13:09:48Z department: - _id: DEP1306 doi: 10.1002/cepa.16 intvolume: ' 1' issue: '1' language: - iso: ger page: 142-152 publication: 'ce/papers : Proceedings in Civil Engineering' publication_identifier: eissn: - 2509-7075 publication_status: published publisher: 'Ernst & Sohn, a Wiley brand ' status: public title: Statistische Modellierung zur Unterstützung von Industrie 4.0 im Glasbau type: journal_article user_id: '83781' volume: 1 year: '2017' ... --- _id: '610' author: - first_name: Andreas full_name: Deuter, Andreas id: '62088' last_name: Deuter - first_name: Andreas full_name: Otte, Andreas id: '51466' last_name: Otte - first_name: Daniel full_name: Höllisch, Daniel last_name: Höllisch citation: ama: 'Deuter A, Otte A, Höllisch D. Methodisches Vorgehen zur Entwicklung und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration. In: Trächtler A, Heinz Nixdorf Institut, eds. Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017. Vol 369. Verlagsschriftenreihe des Heinz Nixdorf Instituts. Paderborn; 2017:211-222.' apa: Deuter, A., Otte, A., & Höllisch, D. (2017). Methodisches Vorgehen zur Entwicklung und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration. In A. Trächtler & Heinz Nixdorf Institut (Eds.), Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017 (Vol. 369, pp. 211–222). Paderborn. bjps: Deuter A, Otte A and Höllisch D (2017) Methodisches Vorgehen zur Entwicklung und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration. In Trächtler A and Heinz Nixdorf Institut (eds), Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017, vol. 369. Paderborn, pp. 211–222. chicago: Deuter, Andreas, Andreas Otte, and Daniel Höllisch. “Methodisches Vorgehen zur Entwicklung und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration.” In Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017, edited by Ansgar Trächtler and Heinz Nixdorf Institut, 369:211–22. Verlagsschriftenreihe des Heinz Nixdorf Instituts. Paderborn, 2017. chicago-de: 'Deuter, Andreas, Andreas Otte und Daniel Höllisch. 2017. Methodisches Vorgehen zur Entwicklung und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration. In: Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017, hg. von Ansgar Trächtler und Heinz Nixdorf Institut, 369:211–222. Verlagsschriftenreihe des Heinz Nixdorf Instituts. Paderborn.' din1505-2-1: 'Deuter, Andreas ; Otte, Andreas ; Höllisch, Daniel: Methodisches Vorgehen zur Entwicklung und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration. In: Trächtler, A. ; Heinz Nixdorf Institut (Hrsg.): Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017, Verlagsschriftenreihe des Heinz Nixdorf Instituts. Bd. 369. Paderborn, 2017, S. 211–222' havard: 'A. Deuter, A. Otte, D. Höllisch, Methodisches Vorgehen zur Entwicklung und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration, in: A. Trächtler, Heinz Nixdorf Institut (Eds.), Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017, Paderborn, 2017: pp. 211–222.' ieee: A. Deuter, A. Otte, and D. Höllisch, “Methodisches Vorgehen zur Entwicklung und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration,” in Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017, Paderborn, 2017, vol. 369, pp. 211–222. mla: Deuter, Andreas, et al. “Methodisches Vorgehen zur Entwicklung und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration.” Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017, edited by Ansgar Trächtler and Heinz Nixdorf Institut, vol. 369, 2017, pp. 211–22. short: 'A. Deuter, A. Otte, D. Höllisch, in: A. Trächtler, Heinz Nixdorf Institut (Eds.), Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017, Paderborn, 2017, pp. 211–222.' ufg: 'Deuter, Andreas et. al. (2017): Methodisches Vorgehen zur Entwicklung und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration, in: Ansgar Trächtler/Heinz Nixdorf Institut (Hgg.): Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017 (=Verlagsschriftenreihe des Heinz Nixdorf Instituts 369), Paderborn, S. 211–222.' van: 'Deuter A, Otte A, Höllisch D. Methodisches Vorgehen zur Entwicklung und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration. In: Trächtler A, Heinz Nixdorf Institut, editors. Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017. Paderborn; 2017. p. 211–22. (Verlagsschriftenreihe des Heinz Nixdorf Instituts; vol. 369).' conference: end_date: 2017-11-12 location: Paderborn name: 'Wissenschafts- und Industrieforum Intelligente Technische Systeme 2017 ' start_date: 2017-05-11 corporate_editor: - Heinz Nixdorf Institut - Universität Paderborn date_created: 2019-02-21T16:30:41Z date_updated: 2023-03-15T13:50:03Z department: - _id: DEP1306 - _id: DEP7022 editor: - first_name: Ansgar full_name: Trächtler, Ansgar last_name: Trächtler intvolume: ' 369' language: - iso: ger page: 211-222 place: Paderborn publication: Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017 publication_status: published series_title: Verlagsschriftenreihe des Heinz Nixdorf Instituts status: public title: Methodisches Vorgehen zur Entwicklung und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration type: conference user_id: '62088' volume: 369 year: 2017 ... --- _id: '309' abstract: - lang: eng text: "It is our pleasure to introduce the seventh edition of the International Conference on Production Engineering and Management (PEM), an event that is the result of the joint effort of the University of Trieste and the Ostwestfalen-\r\nLippe University of Applied Sciences. The conference has been established as an annual meeting under the Double Degree Master Program “Production Engineering and Management” by the two partner universities. This year the conference is hosted at the university campus in Pordenone. The main goal of the conference is to offer students, researchers and professionals in Germany, Italy and abroad, an opportunity to meet and exchange information, discuss experience, specific practices and technical solutions for planning, design and management of manufacturing and service systems and processes. As always, the conference is a platform aimed at presenting research projects, introducing young academics to the tradition of symposiums and promoting the exchange of ideas between the industry and the academy. This year’s special focus is on industry sustainability, which is currently a major topic of discussion among experts and professionals. Sustainability can be considered as a requirement for any modern production processes and systems, and also has to be embedded in the context of Industry 4.0. In fact, the features and problems of industry 4.0 have been widely discussed in the last editions of the PEM conference, in which efficiency and waste reduction emerged as key factors. The study and development of the connections between future industry and sustainability is therefore critical, as highlighted in the recent “German Sustainable Development Strategy and the 2030 Agenda”. Accordingly, the seventh edition of the PEM conference aims to offer a contribution to the debate. The conference program includes 25 speeches organized in six sessions. Three are specifically dedicated to “Direct Digital Manufacturing in the context of Industry 4.0” and “Technology and Business for Circular Economy and Sustainable Production”. The other sessions are covering areas of great interest and importance to the participants of the conference, which are related to the main focus: “Innovative Management Techniques and Methodologies”, “Industrial Engineering and Lean Management” and “Wood Processing Technologies and Furniture Production”. The proceedings of the conference include the articles submitted and accepted after a careful double-blind refereeing process." citation: ama: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2017:248. apa: Padoano, E., Villmer, F.-J., & Department of Production Engineering and Management (Eds.). (2017). Production Engineering and Management (p. 248). Presented at the 7th International Conference, Lemgo. bjps: Padoano E, Villmer F-J and Department of Production Engineering and Management (eds) (2017) Production Engineering and Management. Lemgo. chicago: Padoano, Elio, Franz-Josef Villmer, and Department of Production Engineering and Management, eds. Production Engineering and Management. Schriftenreihe Logistik. Lemgo, 2017. chicago-de: Padoano, Elio, Franz-Josef Villmer und Department of Production Engineering and Management, Hrsg. 2017. Production Engineering and Management. Schriftenreihe Logistik. Lemgo. din1505-2-1: 'Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management, Schriftenreihe Logistik. Lemgo, 2017' havard: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, eds., Production Engineering and Management, Lemgo, 2017. ieee: E. Padoano, F.-J. Villmer, and Department of Production Engineering and Management, Eds., Production Engineering and Management, no. . Lemgo, 2017, p. 248. mla: Padoano, Elio, et al., editors. Production Engineering and Management. no. ., 2017, p. 248. short: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, eds., Production Engineering and Management, Lemgo, 2017. ufg: 'Padoano, Elio et. al. (Hgg.) (2017): Production Engineering and Management (=Schriftenreihe Logistik), Lemgo.' van: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2017. (Schriftenreihe Logistik). conference: end_date: 2017-09-29 location: Pardenone, Italy name: 7th International Conference start_date: 2017-09-28 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2018-12-04T16:24:04Z date_updated: 2023-03-15T13:49:44Z ddc: - '650' department: - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer file: - access_level: open_access content_type: application/pdf creator: hka-zn8 date_created: 2018-12-04T16:21:07Z date_updated: 2018-12-04T16:21:07Z file_id: '310' file_name: PEM_2017_Proceeding_web.pdf file_size: 7437227 relation: main_file success: 1 file_date_updated: 2018-12-04T16:21:07Z has_accepted_license: '1' issue: . language: - iso: eng oa: '1' page: '248' place: Lemgo publication_identifier: isbn: - 978-3-946856-01-6 publication_status: published series_title: Schriftenreihe Logistik status: public title: Production Engineering and Management type: conference_editor user_id: '68554' year: 2017 ... --- _id: '457' abstract: - lang: eng text: "Additive Manufacturing (AM) increasingly enables the realization of structures, which have a much greater freedom of design und can therefore better use nature \ as a design ideal. Bionic design principles have already been introduced \ into general design approaches, and several topology optimization systems (TO) are available today to increase structural stiffness and to enable lightweight \ design. AM and TO, used in synergy, promise completely new application areas. However, staircase effects resulting from a layer-by-layer build process \ and unavoidable support structures which must be mechanically removed afterwards are disadvantageous with respect to surface texture and strength properties.\r\nThe present article addresses the question of how far the notches resulting from the staircase effect of Additive Manufacturing and the support structures removed \ decrease the strength of components. Most engineers try to follow the inner flow of forces in a part’s design by smoothening surfaces in notched areas. Considering this, a elected component is investigated with finite element \ analysis (FEA) with special regard for the concentration of tress arising from surface notch effects. An outlook is given as regards how a reduction of the notch effect from the taircase effect can be achieved effectively." author: - first_name: Eva full_name: Scheideler, Eva id: '61522' last_name: Scheideler - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer - first_name: G. full_name: Adam, G. last_name: Adam - first_name: Mirco full_name: Timmer, Mirco id: '69228' last_name: Timmer conference: end_date: 2016-09-30 location: Lemgo name: Proceedings 6th International Conference start_date: 2016-09-29 corporate_editor: - Department of Production Engineering and Management OWL University of Applied Sciences, Lemgo (Germany) - Hochschule Ostwestfalen-Lippe date_created: 2019-01-22T14:07:32Z date_updated: 2023-03-15T13:49:54Z department: - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Additive Manufacturing - Topology optimization - Staircase effect - Support structures - Stress concentration - Lightweight construction - Design rules - Notch effect language: - iso: eng main_file_link: - open_access: '1' url: https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf oa: '1' page: 39-50 place: Lemgo publication: Production Engineering and Management Proceedings 6th International Conference publication_identifier: isbn: - 978-3-946856-00-9 publication_status: published status: public title: Topology Optimization and Additive Manufacturing – A Perfect Symbiosis? type: conference user_id: '79260' year: 2016 ... --- _id: '7790' author: - first_name: Andreas full_name: Deuter, Andreas id: '62088' last_name: Deuter - first_name: Stefano full_name: Rizzo, Stefano last_name: Rizzo date_created: 2022-04-25T10:55:50Z date_updated: 2023-03-15T13:50:11Z department: - _id: DEP7022 - _id: DEP1306 doi: 10.1016/j.protcy.2016.08.052 intvolume: ' 26' keyword: - PLM - ALM - OSLC language: - iso: eng main_file_link: - open_access: '1' url: https://ac.els-cdn.com/S2212017316303991/1-s2.0-S2212017316303991-main.pdf?_tid=8dfced2e-99dd-4685-8e56-e2d0e34221b2&acdnat=1550505132_3a1d65435574592a67c32f00208a06e2 oa: '1' page: 405-412 place: ' Amsterdam [u.a.] ' publication: Procedia Technology publication_identifier: issn: - 2212-0173 publication_status: published publisher: ' Elsevier' related_material: link: - relation: contains url: https://ac.els-cdn.com/S2212017316303991/1-s2.0-S2212017316303991-main.pdf?_tid=8dfced2e-99dd-4685-8e56-e2d0e34221b2&acdnat=1550505132_3a1d65435574592a67c32f00208a06e2 status: public title: A Critical View on PLM/ALM Convergence in Practice and Research type: scientific_journal_article user_id: '79260' volume: 26 year: 2016 ... --- _id: '584' abstract: - lang: eng text: Due to the continuing trend towards more complexity of products with an increasing number of variants and smaller lot sizes, the assembly often takes place -despite relatively high labor costs in Western industrialized nations -manually or partially automated. An outsourcing or relocation of assembly function abroad is not suitable in most cases.Therefore, it is increasingly important to reduce process variations and waste in manual assembly processes. Assistance systems have the potential, depending on the situation, to assist the worker in his work, to reduce error rate and to increase productivity. In a first part of the paper an overview will be given to different types of assembly assistance systems. Then a morphological chart is developed, which can provide assistance in selecting or comparing assembly assistance systems. With the help of this chart an assembly assistant system is presented. Finally a quick look is taken at further research being done in this area. author: - first_name: Sven full_name: Hinrichsen, Sven id: '49010' last_name: Hinrichsen - first_name: Daniel full_name: Riediger, Daniel id: '52263' last_name: Riediger - first_name: Alexander full_name: Unrau, Alexander id: '64690' last_name: Unrau citation: ama: 'Hinrichsen S, Riediger D, Unrau A. Assistance Systems in Manual Assembly. In: Villmer FJ, Padoano E, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management. ; 2016:3-14.' apa: Hinrichsen, S., Riediger, D., & Unrau, A. (2016). Assistance Systems in Manual Assembly. In F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management (Issue 01, pp. 3–14). bjps: Hinrichsen S, Riediger D and Unrau A (2016) Assistance Systems in Manual Assembly. In Villmer F-J et al. (eds), Production Engineering and Management. Lemgo, pp. 3–14. chicago: Hinrichsen, Sven, Daniel Riediger, and Alexander Unrau. “Assistance Systems in Manual Assembly.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, Department of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, 3–14. Lemgo, 2016. chicago-de: 'Hinrichsen, Sven, Daniel Riediger und Alexander Unrau. 2016. Assistance Systems in Manual Assembly. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, Department of Production Engineering and Management, und Hochschule Ostwestfalen-Lippe, 3–14. Lemgo.' din1505-2-1: 'Hinrichsen, Sven ; Riediger, Daniel ; Unrau, Alexander: Assistance Systems in Manual Assembly. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management ; Hochschule Ostwestfalen-Lippe (Hrsg.): Production Engineering and Management. Lemgo, 2016, S. 3–14' havard: 'S. Hinrichsen, D. Riediger, A. Unrau, Assistance Systems in Manual Assembly, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management, Lemgo, 2016: pp. 3–14.' ieee: S. Hinrichsen, D. Riediger, and A. Unrau, “Assistance Systems in Manual Assembly,” in Production Engineering and Management, Lemgo, 2016, no. 01, pp. 3–14. mla: Hinrichsen, Sven, et al. “Assistance Systems in Manual Assembly.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 01, 2016, pp. 3–14. short: 'S. Hinrichsen, D. Riediger, A. Unrau, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management, Lemgo, 2016, pp. 3–14.' ufg: 'Hinrichsen, Sven/Riediger, Daniel/Unrau, Alexander: Assistance Systems in Manual Assembly, in: Villmer, Franz-Josef u. a. (Hgg.): Production Engineering and Management, Lemgo 2016,  S. 3–14.' van: 'Hinrichsen S, Riediger D, Unrau A. Assistance Systems in Manual Assembly. In: Villmer FJ, Padoano E, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, editors. Production Engineering and Management. Lemgo; 2016. p. 3–14.' conference: end_date: 2016-09-30 location: Lemgo name: Proceedings 6th International Conference start_date: 2016-09-29 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T14:30:50Z date_updated: 2023-04-14T11:27:48Z ddc: - '620' department: - _id: DEP7020 - _id: DEP1306 - _id: DEP1305 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano file: - access_level: open_access content_type: application/pdf creator: mqc-p4h date_created: 2023-04-14T11:26:54Z date_updated: 2023-04-14T11:26:54Z file_id: '9700' file_name: PEM_2016_Hinrichsen Riediger Unrau.pdf file_size: 462853 relation: main_file success: 1 file_date_updated: 2023-04-14T11:26:54Z has_accepted_license: '1' issue: '01' keyword: - Assistance systems - Manual assembly - Morphology language: - iso: eng oa: '1' page: 3-14 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-946856-00-9 publication_status: published quality_controlled: '1' status: public title: Assistance Systems in Manual Assembly type: conference user_id: '49010' year: '2016' ... --- _id: '586' abstract: - lang: eng text: Under the circumstance of advanced globalization, it is increasingly difficult for production companies to remain competitiveness. Many of them are forced to restrict budget and reduce production costs. In addition, the customization of product increases continuously. This results in extension of product variation and reduction of product life cycle. Therefore, the companies need a high flexibility to respond quickly to changes in the market and to customer requirements. Lean thinking, as a powerful tool, has been implemented by many companies in production and manufacturing. In order to avoid waste in lean manufacturing, it is necessary to manage efficiently the material flow. In this study, for a lean material handling system in the lean manufacturing of a company, an in-plant milk-run distribution system is taken into consideration. The system consistsof vehicles, which move periodically in certain routes. The materials are delivered in short intervals from a central storage area to several points of use in the production. By using milk-run in plant, the material handling processes can be standardized and therefore the waste can be eliminated. One additional aim of the study with milk-run distribution for the material provision is to minimize the handling time, which determines directly the personal costs. In order to realize the aim, the work has beendivided into several steps. At first, the production processes, especially the material provision for the production have been analyzed. Secondly, the technological solutions have been analyzed in order to handle different loading units required by different machines in the production. Thirdly, the milk-run distribution for lean production is formulated as an optimization problem with the object of minimizing the number of vehicles and the distance traveled under the constraints of specific time periods, capacity of vehicle and related stations etc. Fourthly, two optimization methods are developed in order to find the optimal solution for the milk-run problem and the performance of different methods is also compared. author: - first_name: Li full_name: Li, Li id: '58482' last_name: Li - first_name: L. full_name: Schulze, L. last_name: Schulze citation: ama: 'Li L, Schulze L. In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Lemgo; 2016:65-76.' apa: Li, L., & Schulze, L. (2016). In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.) (pp. 65–76). Presented at the Proceedings 6th International Conference, Lemgo. bjps: Li L and Schulze L (2016) In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds). Lemgo, pp. 65–76. chicago: Li, Li, and L. Schulze. “In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production.” edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 65–76. Lemgo, 2016. chicago-de: 'Li, Li und L. Schulze. 2016. In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production. In: , hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 65–76. Lemgo.' din1505-2-1: 'Li, Li ; Schulze, L.: In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): . Lemgo, 2016, S. 65–76' havard: 'L. Li, L. Schulze, In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Lemgo, 2016: pp. 65–76.' ieee: L. Li and L. Schulze, “In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production,” presented at the Proceedings 6th International Conference, Lemgo, 2016, no. 1, pp. 65–76. mla: Li, Li, and L. Schulze. In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production. Edited by Franz-Josef Villmer et al., no. 1, 2016, pp. 65–76. short: 'L. Li, L. Schulze, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Lemgo, 2016, pp. 65–76.' ufg: 'Li, Li/Schulze, L. (2016): In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production, in: Franz-Josef Villmer et. al. (Hgg.): , Lemgo, S. 65–76.' van: 'Li L, Schulze L. In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Lemgo; 2016. p. 65–76.' conference: end_date: 2019-09-30 location: Lemgo name: Proceedings 6th International Conference start_date: 2016-09-29 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T14:39:16Z date_updated: 2023-03-15T13:50:02Z department: - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Milk-Run - Material provision - Lean production - Genetic algorithm language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf oa: '1' page: 65-76 place: Lemgo publication_identifier: isbn: - 978-3-946856-00-9 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf status: public title: In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production type: conference user_id: '45673' year: 2016 ... --- _id: '587' abstract: - lang: eng text: Development engineers are most valued for their excellence in physical product development, but on the flipside, project managers face problems when trying to fit them into effectively running development processes. Because of the advantages of Lean Management in production (Lean Production), process managers often try to transfer lean principles directly to development processes, not considering that major differences exist between well-described production processes and new product development processes which include much more uncertainty and risk. Nevertheless, several lean principals are applicable in product development. This paper describes five lean development insights (LDIs) which were found when optimizing an entire product realization process. Lean principles have been examined and then translated to collaboration between product development and tool manufacturing at a globally operating German family-run company. These LDIs are meant to help project and process managers, consultants and developers to rethink their ways of organizing product development. The application of these insights will result in increased transparency, intensified collaboration, improved processes and quality, shortened lead times, and also eliminate waste. author: - first_name: M. full_name: Riediger, M. last_name: Riediger - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: 'Riediger M, Villmer F-J. Five Insights in Effectively Managing Product Development. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2016:111-122.' apa: Riediger, M., & Villmer, F.-J. (2016). Five Insights in Effectively Managing Product Development. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 111–122). Lemgo. bjps: Riediger M and Villmer F-J (2016) Five Insights in Effectively Managing Product Development. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 111–122. chicago: Riediger, M., and Franz-Josef Villmer. “Five Insights in Effectively Managing Product Development.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 111–22. Lemgo, 2016. chicago-de: 'Riediger, M. und Franz-Josef Villmer. 2016. Five Insights in Effectively Managing Product Development. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 111–122. Lemgo.' din1505-2-1: 'Riediger, M. ; Villmer, Franz-Josef: Five Insights in Effectively Managing Product Development. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2016, S. 111–122' havard: 'M. Riediger, F.-J. Villmer, Five Insights in Effectively Managing Product Development, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2016: pp. 111–122.' ieee: M. Riediger and F.-J. Villmer, “Five Insights in Effectively Managing Product Development,” in Production Engineering and Management, Lemgo, 2016, no. 1, pp. 111–122. mla: Riediger, M., and Franz-Josef Villmer. “Five Insights in Effectively Managing Product Development.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2016, pp. 111–22. short: 'M. Riediger, F.-J. Villmer, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2016, pp. 111–122.' ufg: 'Riediger, M./Villmer, Franz-Josef (2016): Five Insights in Effectively Managing Product Development, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 111–122.' van: 'Riediger M, Villmer F-J. Five Insights in Effectively Managing Product Development. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2016. p. 111–22.' conference: end_date: 2016-09-30 location: Lemgo name: Proceedings 6th International Conference start_date: 2016-09-29 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T14:47:41Z date_updated: 2023-03-15T13:50:02Z department: - _id: DEP7000 - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Lean development - Collaboration - Agile - PLM - Frontloading - Simultaneous engineering language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf oa: '1' page: 111-122 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-946856-00-9 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf status: public title: Five Insights in Effectively Managing Product Development type: conference user_id: '45673' year: 2016 ... --- _id: '590' abstract: - lang: eng text: Against the background of rising overhead costs in manufacturing companies the application of methods of overhead cost management is of increasing importance. Within this article existing approaches of cost management are explained in principle. Based on these approaches a new complementary approach of managing costs with the help of costs elasticity ratios is described by a case study. The method is based on the hypothesis that there are no fixed personnel costs, but personnel costs with different elasticity with respect to the volume of orders. Personnel costs elasticity (ε) is derived from the quotient of the relative change in personnel costs (k) and the relative change of the order volume (q) of a billing month (i). The method aims to increase the flexibility of overhead costs, but can also be applied with respect to so-called direct costs. In this case, the question arises as to what extent the direct costs actually develop proportional elastic over time. author: - first_name: Sven full_name: Hinrichsen, Sven id: '49010' last_name: Hinrichsen citation: ama: 'Hinrichsen S. How Elasticity Indicators Support Cost Management. In: Villmer FJ, Padoano E, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management. ; 2016:123-131.' apa: Hinrichsen, S. (2016). How Elasticity Indicators Support Cost Management. In F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management (Issue 1, pp. 123–131). bjps: Hinrichsen S (2016) How Elasticity Indicators Support Cost Management. In Villmer F-J et al. (eds), Production Engineering and Management. Lemgo, pp. 123–131. chicago: Hinrichsen, Sven. “How Elasticity Indicators Support Cost Management.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, Department of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, 123–31. Lemgo, 2016. chicago-de: 'Hinrichsen, Sven. 2016. How Elasticity Indicators Support Cost Management. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, Department of Production Engineering and Management, und Hochschule Ostwestfalen-Lippe, 123–131. Lemgo.' din1505-2-1: 'Hinrichsen, Sven: How Elasticity Indicators Support Cost Management. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management ; Hochschule Ostwestfalen-Lippe (Hrsg.): Production Engineering and Management. Lemgo, 2016, S. 123–131' havard: 'S. Hinrichsen, How Elasticity Indicators Support Cost Management, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management, Lemgo, 2016: pp. 123–131.' ieee: S. Hinrichsen, “How Elasticity Indicators Support Cost Management,” in Production Engineering and Management, Lemgo, 2016, no. 1, pp. 123–131. mla: Hinrichsen, Sven. “How Elasticity Indicators Support Cost Management.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2016, pp. 123–31. short: 'S. Hinrichsen, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management, Lemgo, 2016, pp. 123–131.' ufg: 'Hinrichsen, Sven: How Elasticity Indicators Support Cost Management, in: Villmer, Franz-Josef u. a. (Hgg.): Production Engineering and Management, Lemgo 2016,  S. 123–131.' van: 'Hinrichsen S. How Elasticity Indicators Support Cost Management. In: Villmer FJ, Padoano E, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, editors. Production Engineering and Management. Lemgo; 2016. p. 123–31.' conference: end_date: 2016-09-30 location: Lemgo name: Proceedings 6th International Conference start_date: 2016-09-29 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T15:23:42Z date_updated: 2023-04-14T11:37:27Z ddc: - '330' department: - _id: DEP1306 - _id: DEP7020 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano file: - access_level: open_access content_type: application/pdf creator: mqc-p4h date_created: 2023-04-14T11:36:14Z date_updated: 2023-04-14T11:36:14Z file_id: '9701' file_name: PEM 2016 paper Hinrichsen final.pdf file_size: 130007 relation: main_file success: 1 file_date_updated: 2023-04-14T11:36:14Z has_accepted_license: '1' issue: '1' keyword: - Cost management - Overhead costs - Direct costs - Labor costs - Elasticity language: - iso: eng oa: '1' page: 123-131 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-946856-00-9 publication_status: published status: public title: How Elasticity Indicators Support Cost Management type: conference user_id: '49010' year: '2016' ... --- _id: '593' abstract: - lang: eng text: Due to the increased individualization of customer demands in the last 20 years, the production systems are required to be more flexible and scalable. It is the samefor the material flow system with automated guided vehicles (AGVs). To realize the flexibility and scalability, it is recommended to decentralized control the vehicles. As an attempt, a concept of swarm intelligence with Radio Frequency Identification (RFID) is proposed and introduced in this article. The concept is supposed to be used for automated guided vehicle systems in which objects have to be transported from place to place. Therefore the object has to be self-organized and has to manage its own transport. In this context the vehicles have to choose the most optimal transportation. Swarm intelligence is a topic which deserves a high level of attention as a method to realize high flexibility and scalability. author: - first_name: Alisa Maria full_name: Cantauw, Alisa Maria id: '56638' last_name: Cantauw - first_name: Li full_name: Li, Li id: '58482' last_name: Li citation: ama: 'Cantauw AM, Li L. Application of Swarm Intelligence for Automated Guided Vehicle Systems. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Department of Production Engineering and Management. Lemgo; 2016:133-143.' apa: Cantauw, A. M., & Li, L. (2016). Application of Swarm Intelligence for Automated Guided Vehicle Systems. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Department of Production Engineering and Management (pp. 133–143). Lemgo. bjps: Cantauw AM and Li L (2016) Application of Swarm Intelligence for Automated Guided Vehicle Systems. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Department of Production Engineering and Management. Lemgo, pp. 133–143. chicago: Cantauw, Alisa Maria, and Li Li. “Application of Swarm Intelligence for Automated Guided Vehicle Systems.” In Department of Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 133–43. Lemgo, 2016. chicago-de: 'Cantauw, Alisa Maria und Li Li. 2016. Application of Swarm Intelligence for Automated Guided Vehicle Systems. In: Department of Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 133–143. Lemgo.' din1505-2-1: 'Cantauw, Alisa Maria ; Li, Li: Application of Swarm Intelligence for Automated Guided Vehicle Systems. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Department of Production Engineering and Management. Lemgo, 2016, S. 133–143' havard: 'A.M. Cantauw, L. Li, Application of Swarm Intelligence for Automated Guided Vehicle Systems, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Department of Production Engineering and Management, Lemgo, 2016: pp. 133–143.' ieee: A. M. Cantauw and L. Li, “Application of Swarm Intelligence for Automated Guided Vehicle Systems,” in Department of Production Engineering and Management, Lemgo, 2016, no. 1, pp. 133–143. mla: Cantauw, Alisa Maria, and Li Li. “Application of Swarm Intelligence for Automated Guided Vehicle Systems.” Department of Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2016, pp. 133–43. short: 'A.M. Cantauw, L. Li, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Department of Production Engineering and Management, Lemgo, 2016, pp. 133–143.' ufg: 'Cantauw, Alisa Maria/Li, Li (2016): Application of Swarm Intelligence for Automated Guided Vehicle Systems, in: Franz-Josef Villmer et. al. (Hgg.): Department of Production Engineering and Management, Lemgo, S. 133–143.' van: 'Cantauw AM, Li L. Application of Swarm Intelligence for Automated Guided Vehicle Systems. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Department of Production Engineering and Management. Lemgo; 2016. p. 133–43.' conference: end_date: 2016-09-30 location: Lemgo name: Proceedings 6th International Conference start_date: 2016-09-29 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T15:32:10Z date_updated: 2023-03-15T13:50:03Z department: - _id: DEP7000 - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Swarm intelligence - Automated guided vehicle system - RFID - Internet of things - Multi-agent system language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf oa: '1' page: 133-143 place: Lemgo publication: Department of Production Engineering and Management publication_identifier: isbn: - 978-3-946856-00-9 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf status: public title: Application of Swarm Intelligence for Automated Guided Vehicle Systems type: conference user_id: '45673' year: 2016 ... --- _id: '594' abstract: - lang: eng text: Due to steadily increased demand for customized products, as well as their enhanced complexity and shorter product lifecycles, companies in all industries require a reliable prediction of the expected product development costs from the very start of product realization. Incorrectly estimated project costs may lead to serious consequences in the course of a development project. For example, offers are most often based on such early cost estimations and consequently, a major safety margin has to be added, which may result in the refusal of an order. A too low estimation of the costs of aproduct development project, on the other hand, may result in a loss for the project.In this paper, a software tool is presented for the prediction of product development costs which offers the user the ability to create a more accurate prediction of project costs on the basis of a minimum of retrograde project information. By combining a parametric cost model and cost result with stochastic character, based on the Monte Carlo method, in one software system, it is possible to significantly improve projectcost estimations. author: - first_name: Andreas full_name: Otte, Andreas id: '51466' last_name: Otte - first_name: Eva full_name: Scheideler, Eva id: '61522' last_name: Scheideler - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: 'Otte A, Scheideler E, Villmer F-J. Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Department of Production Engineering and Management. Lemgo; 2016:281-292.' apa: Otte, A., Scheideler, E., & Villmer, F.-J. (2016). Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Department of Production Engineering and Management (pp. 281–292). Lemgo. bjps: Otte A, Scheideler E and Villmer F-J (2016) Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Department of Production Engineering and Management. Lemgo, pp. 281–292. chicago: Otte, Andreas, Eva Scheideler, and Franz-Josef Villmer. “Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage.” In Department of Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 281–92. Lemgo, 2016. chicago-de: 'Otte, Andreas, Eva Scheideler und Franz-Josef Villmer. 2016. Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage. In: Department of Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 281–292. Lemgo.' din1505-2-1: 'Otte, Andreas ; Scheideler, Eva ; Villmer, Franz-Josef: Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Department of Production Engineering and Management. Lemgo, 2016, S. 281–292' havard: 'A. Otte, E. Scheideler, F.-J. Villmer, Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Department of Production Engineering and Management, Lemgo, 2016: pp. 281–292.' ieee: A. Otte, E. Scheideler, and F.-J. Villmer, “Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage,” in Department of Production Engineering and Management, Lemgo, 2016, no. 1, pp. 281–292. mla: Otte, Andreas, et al. “Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage.” Department of Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2016, pp. 281–92. short: 'A. Otte, E. Scheideler, F.-J. Villmer, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Department of Production Engineering and Management, Lemgo, 2016, pp. 281–292.' ufg: 'Otte, Andreas et. al. (2016): Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage, in: Franz-Josef Villmer et. al. (Hgg.): Department of Production Engineering and Management, Lemgo, S. 281–292.' van: 'Otte A, Scheideler E, Villmer F-J. Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Department of Production Engineering and Management. Lemgo; 2016. p. 281–92.' conference: end_date: 2016-09-30 location: Lemgo name: Proceedings 6th International Conference start_date: 2016-09-29 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T15:41:41Z date_updated: 2023-03-15T13:50:03Z department: - _id: DEP7000 - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Cost prediction - Product realization projects - Monte Carlo method - Parametric cost model - Software tool language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf oa: '1' page: 281-292 place: Lemgo publication: Department of Production Engineering and Management publication_identifier: isbn: - 978-3-946856-00-9 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf status: public title: Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage type: conference user_id: '45673' year: 2016 ... --- _id: '472' abstract: - lang: eng text: "In the context of Industrie 4.0 respectively direct digital manufacturing, seamless process chains are an important factor. The objective is to shorten the time between quoting for individually designed products and their production and delivery. Therefore, reliable automated and fast evaluation procedures are needed to ensure the quality of the individually designed products in terms of product safety and reliability. This paper aims \r\nto demonstrate how a metamodel, generated on simulated data, adapts to the type of product and delivers the required quality and evaluation procedure. The metamodel guarantees the requested characteristics of the final product without the consultation of human expert knowledge. As proof of concept, a simple, well-documented task from the field of construction has been chosen. The estimation from of the metamodel will meet all safety requirements, is based on the individual input variables and is confirmed without expert interaction. Fast, reliable prediction models deriving from complex simulation models are indispensable conditions for direct digital manufacturing. Using metamodels in automation contexts will be a foundation of manufacturing in future." author: - first_name: Eva full_name: Scheideler, Eva id: '61522' last_name: Scheideler - first_name: Andrea full_name: Ahlemeyer-Stubbe, Andrea last_name: Ahlemeyer-Stubbe citation: ama: 'Scheideler E, Ahlemeyer-Stubbe A. Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments. In: Villmer FJ, Padoano E, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management : Proceedings 6th International Conference, September 29 and 30, 2016 Lemgo, Germany . Vol 2016.   Publication series in direct digital manufacturing . Hochschule Ostwestfalen-Lippe; 2016:269-280.' apa: 'Scheideler, E., & Ahlemeyer-Stubbe, A. (2016). Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments. In F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe (Eds.), Production engineering and management : proceedings 6th international conference, September 29 and 30, 2016 Lemgo, Germany (Vol. 2016, Issue 1, pp. 269–280). Hochschule Ostwestfalen-Lippe.' bjps: 'Scheideler E and Ahlemeyer-Stubbe A (2016) Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments. In Villmer F-J et al. (eds), Production Engineering and Management : Proceedings 6th International Conference, September 29 and 30, 2016 Lemgo, Germany , vol. 2016. Lemgo: Hochschule Ostwestfalen-Lippe, pp. 269–280.' chicago: 'Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments.” In Production Engineering and Management : Proceedings 6th International Conference, September 29 and 30, 2016 Lemgo, Germany , edited by Franz-Josef Villmer, Elio Padoano, Department of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, 2016:269–80.   Publication Series in Direct Digital Manufacturing . Lemgo: Hochschule Ostwestfalen-Lippe, 2016.' chicago-de: 'Scheideler, Eva und Andrea Ahlemeyer-Stubbe. 2016. Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments. In: Production engineering and management : proceedings 6th international conference, September 29 and 30, 2016 Lemgo, Germany , hg. von Franz-Josef Villmer, Elio Padoano, Department of Production Engineering and Management, und Hochschule Ostwestfalen-Lippe, 2016:269–280.   Publication series in direct digital manufacturing . Lemgo: Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Scheideler, Eva ; Ahlemeyer-Stubbe, Andrea: Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management ; Hochschule Ostwestfalen-Lippe (Hrsg.): Production engineering and management : proceedings 6th international conference, September 29 and 30, 2016 Lemgo, Germany ,   Publication series in direct digital manufacturing . Bd. 2016. Lemgo : Hochschule Ostwestfalen-Lippe, 2016, S. 269–280' havard: 'E. Scheideler, A. Ahlemeyer-Stubbe, Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management : Proceedings 6th International Conference, September 29 and 30, 2016 Lemgo, Germany , Hochschule Ostwestfalen-Lippe, Lemgo, 2016: pp. 269–280.' ieee: 'E. Scheideler and A. Ahlemeyer-Stubbe, “Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments,” in Production engineering and management : proceedings 6th international conference, September 29 and 30, 2016 Lemgo, Germany , Lemgo, 2016, vol. 2016, no. 1, pp. 269–280.' mla: 'Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments.” Production Engineering and Management : Proceedings 6th International Conference, September 29 and 30, 2016 Lemgo, Germany , edited by Franz-Josef Villmer et al., vol. 2016, no. 1, Hochschule Ostwestfalen-Lippe, 2016, pp. 269–80.' short: 'E. Scheideler, A. Ahlemeyer-Stubbe, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management : Proceedings 6th International Conference, September 29 and 30, 2016 Lemgo, Germany , Hochschule Ostwestfalen-Lippe, Lemgo, 2016, pp. 269–280.' ufg: 'Scheideler, Eva/Ahlemeyer-Stubbe, Andrea: Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments, in: Villmer, Franz-Josef u. a. (Hgg.): Production engineering and management : proceedings 6th international conference, September 29 and 30, 2016 Lemgo, Germany , Bd. 2016, Lemgo 2016 (  Publication series in direct digital manufacturing ),  S. 269–280.' van: 'Scheideler E, Ahlemeyer-Stubbe A. Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments. In: Villmer FJ, Padoano E, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, editors. Production engineering and management : proceedings 6th international conference, September 29 and 30, 2016 Lemgo, Germany . Lemgo: Hochschule Ostwestfalen-Lippe; 2016. p. 269–80. (  Publication series in direct digital manufacturing ; vol. 2016).' conference: end_date: 2016-09-30 location: Lemgo name: '6th International Conference on Production Engineering and Management ' start_date: 2016-09-29 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-01-29T13:06:45Z date_updated: 2024-03-22T13:18:42Z department: - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano intvolume: ' 2016' issue: '1' keyword: - Simulation - Metamodel - Computer experiment - Design of experiments language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf oa: '1' page: 269-280 place: Lemgo publication: 'Production engineering and management : proceedings 6th international conference, September 29 and 30, 2016 Lemgo, Germany ' publication_identifier: unknown: - 978-3-946856-00-9 publication_status: published publisher: Hochschule Ostwestfalen-Lippe related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf series_title: "\t Publication series in direct digital manufacturing " status: public title: Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments type: conference user_id: '83781' volume: 2016 year: '2016' ... --- _id: '473' abstract: - lang: eng text: "Additive Manufacturing (AM) describes a number of technologies that generate three-dimensional objects directly from CAD data by joining volume elements. Dental technology is one sector in which the benefits of AM come into effect, as parts such as frameworks or implants are unique objects often with freeform shapes. These objects are difficult and expensive to produce with subtractive or formative technology.\r\nDuring the last decades, the application of digital technologies in the dental industry has increased. Therefore AM has also evolved to become a standard dental framework manufacturing process. While previously the dental laboratory did the complete manufacturing of dental frameworks, AM parts are usually produced by service providers, thus increasing the number of process participants. Under these circumstances, a reliable high quality production must be ensured. This requires a comprehensive Quality Management (QM) concept for the whole process chain. A first step in the evelopment of this QM concept is the definition of the product requirements, from which process specifications can be determined. These specifications build the basis for evaluating the process capability of the Additive Manufacturing process." author: - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: 'Huxol A, Villmer F-J. Special Requirements for Additive Manufacturing of Dental Frameworks. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. ; 2016:15-26.' apa: Huxol, A., & Villmer, F.-J. (2016). Special Requirements for Additive Manufacturing of Dental Frameworks. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 15–26). Lemgo. bjps: Huxol A and Villmer F-J (2016) Special Requirements for Additive Manufacturing of Dental Frameworks. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Production Engineering and Management. pp. 15–26. chicago: Huxol, Andrea, and Franz-Josef Villmer. “Special Requirements for Additive Manufacturing of Dental Frameworks.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 15–26, 2016. chicago-de: 'Huxol, Andrea und Franz-Josef Villmer. 2016. Special Requirements for Additive Manufacturing of Dental Frameworks. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 15–26.' din1505-2-1: 'Huxol, Andrea ; Villmer, Franz-Josef: Special Requirements for Additive Manufacturing of Dental Frameworks. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management, 2016, S. 15–26' havard: 'A. Huxol, F.-J. Villmer, Special Requirements for Additive Manufacturing of Dental Frameworks, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, 2016: pp. 15–26.' ieee: A. Huxol and F.-J. Villmer, “Special Requirements for Additive Manufacturing of Dental Frameworks,” in Production Engineering and Management, Lemgo, 2016, no. 1, pp. 15–26. mla: Huxol, Andrea, and Franz-Josef Villmer. “Special Requirements for Additive Manufacturing of Dental Frameworks.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2016, pp. 15–26. short: 'A. Huxol, F.-J. Villmer, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, 2016, pp. 15–26.' ufg: 'Huxol, Andrea/Villmer, Franz-Josef (2016): Special Requirements for Additive Manufacturing of Dental Frameworks, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, S. 15–26.' van: 'Huxol A, Villmer F-J. Special Requirements for Additive Manufacturing of Dental Frameworks. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. 2016. p. 15–26.' conference: end_date: 2016-09-30 location: Lemgo name: Proceedings 6th International Conference start_date: 2016-09-29 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-01-29T13:37:02Z date_updated: 2023-03-15T13:49:55Z department: - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Additive Manufacturing - Dental frameworks - Quality management - Digital manufacturing language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf oa: '1' page: 15-26 publication: Production Engineering and Management publication_identifier: unknown: - 978-3-946856-00-9 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf status: public title: Special Requirements for Additive Manufacturing of Dental Frameworks type: conference user_id: '45673' year: 2016 ... --- _id: '333' abstract: - lang: eng text: "The annual International Conference on Production Engineering and Management takes place for the sixth time his year, and can therefore be considered a well - established event that is the result of the joint effort of the OWL University of Applied Sciences and the University of Trieste. The conference has been established as an annual meeting under the Double Degree Master Program ‘Production Engineering and Management’ by the two partner universities.\r\nThe main goal of the conference is to provide an opportunity for students, researchers and professionals from Germany, Italy and abroad, to meet and exchange information, discuss experiences, specific practices and technical solutions used in planning, design and management of production and service systems. In addition, the conference is a platform aimed at presenting research projects, introducing young academics to the tradition of \r\nSymposiums and promoting the exchange of ideas between the industry and the academy. Especially the contributions of successful graduates of the Double Degree Master Program ‘Production Engineering and Management’ and those of other postgraduate researchers from several European countries have been enforced. \r\n\r\nThis year’s special focus is on Direct Digital Manufacturing in the context of Industry 4.0, a topic of great interest for the global industry. The concept is spreading, but the actual solutions must be presented in order to highlight \r\nthe practical benefits to industry and customers. Indeed, as Henning Banthien, Secretary General of the German \r\n‘Plattform Industrie 4.0’ project office, has recently remarked, “Industry 4.0 requires a close alliance amongst the private sector, academia, politics and trade unions” in order to be “translated into practice and be implemented now”. \r\nPEM 2016 takes place between September 29 and 30, 2016 at the OWL University of Applied Sciences in Lemgo. The program is defined by the Organizing and Scientific Committees and clustered into scientific sessions \r\ncovering topics of main interest and importance to the participants of the conference. The scientific sessions deal\r\nwith technical and engineering issues, as well as management topics, and include contributions by researchers from academia and industry. The extended abstracts and full papers of the contributions underwent a double -\r\nblind review process. The 24 accepted presentations are assigned, according to their subject, to one of the following sessions: ‘Direct Digital Manufacturing in the Context of Industry 4.0’, ‘Industrial Engineering and Lean Management’, ‘Management Techniques and Methodologies’, ‘Wood Processing Technologies and Furniture Production’ and ‘Innovation Techniques and Methodologies." citation: ama: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2016:304. apa: Villmer, F.-J., Padoano, E., & Department of Production Engineering and Management (Eds.). (2016). Production Engineering and Management (p. 304). Presented at the 6th International Conference, Lemgo. bjps: Villmer F-J, Padoano E and Department of Production Engineering and Management (eds) (2016) Production Engineering and Management. Lemgo. chicago: Villmer, Franz-Josef, Elio Padoano, and Department of Production Engineering and Management, eds. Production Engineering and Management. Schriftenreihe Logistik. Lemgo, 2016. chicago-de: Villmer, Franz-Josef, Elio Padoano und Department of Production Engineering and Management, Hrsg. 2016. Production Engineering and Management. Schriftenreihe Logistik. Lemgo. din1505-2-1: 'Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management, Schriftenreihe Logistik. Lemgo, 2016' havard: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, eds., Production Engineering and Management, Lemgo, 2016. ieee: F.-J. Villmer, E. Padoano, and Department of Production Engineering and Management, Eds., Production Engineering and Management, no. 1. Lemgo, 2016, p. 304. mla: Villmer, Franz-Josef, et al., editors. Production Engineering and Management. no. 1, 2016, p. 304. short: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, eds., Production Engineering and Management, Lemgo, 2016. ufg: 'Villmer, Franz-Josef et. al. (Hgg.) (2016): Production Engineering and Management (=Schriftenreihe Logistik), Lemgo.' van: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2016. (Schriftenreihe Logistik). conference: end_date: 2016-09-30 location: Lemgo name: 6th International Conference start_date: 2016-09-29 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2018-12-11T13:19:40Z date_updated: 2023-03-15T13:49:46Z ddc: - '650' department: - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano file: - access_level: open_access content_type: application/pdf creator: hka-zn8 date_created: 2018-12-11T13:13:14Z date_updated: 2018-12-11T13:13:14Z file_id: '334' file_name: PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf file_size: 11743302 relation: main_file success: 1 file_date_updated: 2018-12-11T13:13:14Z has_accepted_license: '1' issue: '1' language: - iso: eng oa: '1' page: '304' place: Lemgo publication_identifier: isbn: - 978-3-946856-00-9 publication_status: published series_title: Schriftenreihe Logistik status: public title: Production Engineering and Management type: conference_editor user_id: '74222' year: 2016 ... --- _id: '432' abstract: - lang: eng text: "The trend of increasing technological complexity of machines mainly correlates with the integration of additional functions in machines. Increasing functionality \ of the machines leads to an increased number of control \r\nelements, which limits the clarity of the machine operation and leads to higher cognitive demands in the machine operation. Due to the growing functional range of production machines the demand of usability for the operating systems continues to \ grow. The selection and design of icons for the identification of controls \ contributes significantly to usability, especially for intuitive operation of production machines. \r\nThe aim of this study is to investigate the \ intuitive usability of production machines, to consider its use of graphical \ elements (icons) and to derive recommendations for a demand-oriented \ selection and design of icons. To achieve this goal, laboratory studies at five modern production machines (laser sintering machine, CNC universal \ lathe, plastic injection molding machine, laser processing machine, woodworking \ machine) - each with different operating concept - were performed. The results \ of the study show that the used symbols in the examined machines are \ only limited self-explanatory and intuitive, and thus have significant deficits for easy and intuitive operation. Especially the combination of screens and electronic keys or switches was often criticized and leads to uncertainty in the operation. As a result, recommendations for the design of icons on production machines are given. " author: - first_name: Daniel full_name: Riediger, Daniel id: '52263' last_name: Riediger - first_name: Sven full_name: Hinrichsen, Sven id: '49010' last_name: Hinrichsen - first_name: Alexander full_name: Schlee, Alexander id: '48127' last_name: Schlee citation: ama: 'Riediger D, Hinrichsen S, Schlee A. Ergonomic Design of Graphical Control Elements on Production Machines. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo: Hochschule Ostwestfalen-Lippe; 2015:123-130.' apa: 'Riediger, D., Hinrichsen, S., & Schlee, A. (2015). Ergonomic Design of Graphical Control Elements on Production Machines. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management, (Eds.), Production Engineering and Management (pp. 123–130). Lemgo: Hochschule Ostwestfalen-Lippe.' bjps: 'Riediger D, Hinrichsen S and Schlee A (2015) Ergonomic Design of Graphical Control Elements on Production Machines. In Villmer F-J, Padoano E and Department of Production Engineering and Management, (eds), Production Engineering and Management. Lemgo: Hochschule Ostwestfalen-Lippe, pp. 123–130.' chicago: 'Riediger, Daniel, Sven Hinrichsen, and Alexander Schlee. “Ergonomic Design of Graphical Control Elements on Production Machines.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 123–30. Lemgo: Hochschule Ostwestfalen-Lippe, 2015.' chicago-de: 'Riediger, Daniel, Sven Hinrichsen und Alexander Schlee. 2015. Ergonomic Design of Graphical Control Elements on Production Machines. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 123–130. Lemgo: Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Riediger, Daniel ; Hinrichsen, Sven ; Schlee, Alexander: Ergonomic Design of Graphical Control Elements on Production Machines. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management, (Hrsg.): Production Engineering and Management. Lemgo : Hochschule Ostwestfalen-Lippe, 2015, S. 123–130' havard: 'D. Riediger, S. Hinrichsen, A. Schlee, Ergonomic Design of Graphical Control Elements on Production Machines, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, (Eds.), Production Engineering and Management, Hochschule Ostwestfalen-Lippe, Lemgo, 2015: pp. 123–130.' ieee: D. Riediger, S. Hinrichsen, and A. Schlee, “Ergonomic Design of Graphical Control Elements on Production Machines,” in Production Engineering and Management, Trieste, 2015, no. 1, pp. 123–130. mla: Riediger, Daniel, et al. “Ergonomic Design of Graphical Control Elements on Production Machines.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, Hochschule Ostwestfalen-Lippe, 2015, pp. 123–30. short: 'D. Riediger, S. Hinrichsen, A. Schlee, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, (Eds.), Production Engineering and Management, Hochschule Ostwestfalen-Lippe, Lemgo, 2015, pp. 123–130.' ufg: 'Riediger, Daniel et. al. (2015): Ergonomic Design of Graphical Control Elements on Production Machines, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 123–130.' van: 'Riediger D, Hinrichsen S, Schlee A. Ergonomic Design of Graphical Control Elements on Production Machines. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo: Hochschule Ostwestfalen-Lippe; 2015. p. 123–30.' conference: end_date: 2015-10-02 location: Trieste name: Proceedings 5th international conference start_date: 2015-10-01 corporate_editor: - Department of Production Engineering and Management, - Hochschule Ostwestfalen-Lippe date_created: 2019-01-16T16:07:56Z date_updated: 2023-03-15T13:49:52Z department: - _id: DEP7020 - _id: DEP1306 - _id: DEP1305 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Usability - production mach ine - icons - usability - hum an-machine compatibility language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fb7/fileadmin/download/labore/industrialengineering/pdf/Veroeffentlichungen/PEM2015_Ergonomic_Design_of_Graphical_Control_Elements_on_Production_Machines.pdf oa: '1' page: 123-130 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-941645-11-0 publication_status: published publisher: Hochschule Ostwestfalen-Lippe related_material: link: - relation: contains url: https://www.hs-owl.de/fb7/fileadmin/download/labore/industrialengineering/pdf/Veroeffentlichungen/PEM2015_Ergonomic_Design_of_Graphical_Control_Elements_on_Production_Machines.pdf status: public title: Ergonomic Design of Graphical Control Elements on Production Machines type: conference user_id: '45673' year: 2015 ... --- _id: '585' abstract: - lang: eng text: "Many low-cost 3D printers have been brought to market over the last couple of years. Most of them apply a Fused Layer Manufacturing (FLM) process, and have made 3D printing a great success amongst hobbyists, the maker community and students. One drawback of such inexpensive equipment is a limited build envelope, which prevents this from becoming a significant contributor to industrial production. To overcome these limits, it is not sufficient to simply upscale dimensions, but the overall concept of such machines must be completely re-thought, as well as the concepts behind several building blocks, components and the process software system.\r\nProblems such as shrinkage of build material, support material and machine parts in combination with long printer head travels, temperature distribution and moisture effects all have to be solved. In addition, larger parts need longer process times. Therefore, reduction of process times and an increase in productivity are necessary in order to enable economic production.\r\nSome of these problems can be solved by using more than one printer head for production, by using new materials and inventing new nozzle systems as distinct solutions for big printers. Nevertheless, to solve all these problems, the development of special machines for large parts is necessary: not component-wise but as a whole system. Large parts could then be successfully produced in several industries, using large, inexpensive FLMmachines.\r\n" author: - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer - first_name: Lars full_name: Witte, Lars id: '45920' last_name: Witte citation: ama: 'Villmer F-J, Witte L. Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2015:111-122.' apa: 'Villmer, F.-J., & Witte, L. (2015). Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 111–122). Lemgo.' bjps: 'Villmer F-J and Witte L (2015) Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 111–122.' chicago: 'Villmer, Franz-Josef, and Lars Witte. “Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 111–22. Lemgo, 2015.' chicago-de: 'Villmer, Franz-Josef und Lars Witte. 2015. Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 111–122. Lemgo.' din1505-2-1: 'Villmer, Franz-Josef ; Witte, Lars: Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2015, S. 111–122' havard: 'F.-J. Villmer, L. Witte, Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2015: pp. 111–122.' ieee: 'F.-J. Villmer and L. Witte, “Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself,” in Production Engineering and Management, Trieste, Italy, 2015, no. 1, pp. 111–122.' mla: 'Villmer, Franz-Josef, and Lars Witte. “Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2015, pp. 111–22.' short: 'F.-J. Villmer, L. Witte, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2015, pp. 111–122.' ufg: 'Villmer, Franz-Josef/Witte, Lars (2015): Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 111–122.' van: 'Villmer F-J, Witte L. Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2015. p. 111–22.' conference: end_date: 2015-10-02 location: Trieste, Italy name: Proceedings5th International Conference start_date: 2015-10-01 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T14:42:21Z date_updated: 2023-03-15T13:50:02Z department: - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer issue: '1' keyword: - 3D printing - FLM - build envelope - large-scale - thermoplastic polymers language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf oa: '1' page: 111-122 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-941645-11-0 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf status: public title: 'Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself' type: conference user_id: '45673' year: 2015 ... --- _id: '588' abstract: - lang: eng text: "While common measurement techniques like gloss or color measurement are widely used in industry for quality assessment of furniture high gloss surfaces, they indicate only a weak correlation to the quality perceived by the customer. Topography based approaches achieve higher correlation to human perception but are often based on linear measurement which cannot be applied for an overall assessment of larger surfaces. Thus an algorithm was developed to calculate a specific value based on topographic features, such as orange peel, within the research project ‘Development of a comprehensive quality concept for furniture high gloss surfaces’, funded by the federal Ministry of Education and Research. For the evaluation of short waved structures on furniture high gloss surfaces the ratio of hill height to hill area was chosen. This parameter proves to be applicable for an evaluation of the extent of a single.\r\n" author: - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Adrian full_name: Riegel, Adrian id: '14647' last_name: Riegel - first_name: Kerstin full_name: Dekomien, Kerstin id: '59843' last_name: Dekomien citation: ama: 'Huxol A, Riegel A, Dekomien K. Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2015:99-110.' apa: Huxol, A., Riegel, A., & Dekomien, K. (2015). Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 99–110). Lemgo. bjps: Huxol A, Riegel A and Dekomien K (2015) Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 99–110. chicago: Huxol, Andrea, Adrian Riegel, and Kerstin Dekomien. “Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 99–110. Lemgo, 2015. chicago-de: 'Huxol, Andrea, Adrian Riegel und Kerstin Dekomien. 2015. Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 99–110. Lemgo.' din1505-2-1: 'Huxol, Andrea ; Riegel, Adrian ; Dekomien, Kerstin: Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2015, S. 99–110' havard: 'A. Huxol, A. Riegel, K. Dekomien, Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2015: pp. 99–110.' ieee: A. Huxol, A. Riegel, and K. Dekomien, “Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception,” in Production Engineering and Management, Trieste, Italy, 2015, no. 1, pp. 99–110. mla: Huxol, Andrea, et al. “Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2015, pp. 99–110. short: 'A. Huxol, A. Riegel, K. Dekomien, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2015, pp. 99–110.' ufg: 'Huxol, Andrea et. al. (2015): Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 99–110.' van: 'Huxol A, Riegel A, Dekomien K. Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2015. p. 99–110.' conference: end_date: 2015-10-02 location: Trieste, Italy name: Proceedings5th International Conference start_date: 2015-10-01 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T15:13:34Z date_updated: 2023-03-15T13:50:02Z department: - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer issue: '1' keyword: - High gloss - surface measurement - topographic features - quality assessment language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf oa: '1' page: 99-110 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-941645-11-0 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf status: public title: Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception type: conference user_id: '45673' year: 2015 ... --- _id: '597' abstract: - lang: eng text: "This paper is aimed to discuss current research using data mining techniques and industry statistics in production environments. The general research approach is based on the idea of using data mining processes and techniques of industry statistics to find rare and hidden patterns behind failures of complex components. A case study will be applied to illustrate how the technique is carried out and where the limits of this approach occur. The case study deals with a component supplier of printing machines, which received an increasing number of client complaints, all related to one distinct problem. The observed failures seem to occur only among clients with very high quality standards. The affected component undergoes a very complex production process with several steps in different departments. Every single production unit records data information from multiple process variables and at different points in time. In the beginning there was no understanding of the failure causes in production at all. Therefore a huge amount of production data had to be analyzed to find the pattern that discloses the failure.\r\nThe data mining process starts with a first step in which the given data sets are prepared and then cleaned. Followed up by building a prediction model. The aim is to detect the root causes for failures and to predict potential failures in affected components. This paper shows how to use data mining to get the answer on pressing production failures.\r\n" author: - first_name: Eva full_name: Scheideler, Eva id: '61522' last_name: Scheideler - first_name: Andrea full_name: Ahlemeyer-Stubbe, Andrea last_name: Ahlemeyer-Stubbe citation: ama: 'Scheideler E, Ahlemeyer-Stubbe A. Data Mining: A Potential Detector to Find Failure in Complex Components. In: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy. Hochschule Ostwestfalen-Lippe; 2015:163-174.' apa: 'Scheideler, E., & Ahlemeyer-Stubbe, A. (2015). Data Mining: A Potential Detector to Find Failure in Complex Components. In E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe (Eds.), Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy (Issue 1, pp. 163–174). Hochschule Ostwestfalen-Lippe.' bjps: 'Scheideler E and Ahlemeyer-Stubbe A (2015) Data Mining: A Potential Detector to Find Failure in Complex Components. In Padoano E et al. (eds), Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy. Lemgo: Hochschule Ostwestfalen-Lippe, pp. 163–174.' chicago: 'Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Data Mining: A Potential Detector to Find Failure in Complex Components.” In Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy, edited by Elio Padoano, Franz-Josef Villmer, Department of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, 163–74. Lemgo: Hochschule Ostwestfalen-Lippe, 2015.' chicago-de: 'Scheideler, Eva und Andrea Ahlemeyer-Stubbe. 2015. Data Mining: A Potential Detector to Find Failure in Complex Components. In: Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy, hg. von Elio Padoano, Franz-Josef Villmer, Department of Production Engineering and Management, und Hochschule Ostwestfalen-Lippe, 163–174. Lemgo: Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Scheideler, Eva ; Ahlemeyer-Stubbe, Andrea: Data Mining: A Potential Detector to Find Failure in Complex Components. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management ; Hochschule Ostwestfalen-Lippe (Hrsg.): Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy. Lemgo : Hochschule Ostwestfalen-Lippe, 2015, S. 163–174' havard: 'E. Scheideler, A. Ahlemeyer-Stubbe, Data Mining: A Potential Detector to Find Failure in Complex Components, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy, Hochschule Ostwestfalen-Lippe, Lemgo, 2015: pp. 163–174.' ieee: 'E. Scheideler and A. Ahlemeyer-Stubbe, “Data Mining: A Potential Detector to Find Failure in Complex Components,” in Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy, Trieste, Italy, 2015, no. 1, pp. 163–174.' mla: 'Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Data Mining: A Potential Detector to Find Failure in Complex Components.” Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy, edited by Elio Padoano et al., no. 1, Hochschule Ostwestfalen-Lippe, 2015, pp. 163–74.' short: 'E. Scheideler, A. Ahlemeyer-Stubbe, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy, Hochschule Ostwestfalen-Lippe, Lemgo, 2015, pp. 163–174.' ufg: 'Scheideler, Eva/Ahlemeyer-Stubbe, Andrea: Data Mining: A Potential Detector to Find Failure in Complex Components, in: Padoano, Elio u. a. (Hgg.): Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy, Lemgo 2015,  S. 163–174.' van: 'Scheideler E, Ahlemeyer-Stubbe A. Data Mining: A Potential Detector to Find Failure in Complex Components. In: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, editors. Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy. Lemgo: Hochschule Ostwestfalen-Lippe; 2015. p. 163–74.' conference: end_date: 2015-10-02 location: Trieste, Italy name: '5th International Conference "Production Engineering and Management" ' start_date: 2015-10-01 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-19T07:15:57Z date_updated: 2024-03-22T13:12:47Z department: - _id: DEP7000 - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer issue: '1' keyword: - Data mining - production failure - multi-variant analysis - multivariate process control - predictive modelling - case study language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf oa: '1' page: 163-174 place: Lemgo publication: 'Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy' publication_identifier: isbn: - 978-3-941645-11-0 publication_status: published publisher: Hochschule Ostwestfalen-Lippe related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf status: public title: 'Data Mining: A Potential Detector to Find Failure in Complex Components' type: conference user_id: '83781' year: '2015' ... --- _id: '598' abstract: - lang: eng text: "The aerospace sector is characterized by long product life cycles and a need for lightweight design. Additive manufacturing is a technology that produces parts layer by layer and thus enables the manufacturing of any complex parts at nearly no extra costs. A topology optimization enhances the part’s\r\nperformance for their special purpose. The results are often complex bionic structures that cannot be produced with conventional manufacturing technologies. The paper analyzes how the high potential of this technologycan be applied to aerospace parts. A topology optimization will be conducted for an aircraft part explaining the crucial points and a life cycle analysis examines the achieved sustainable improvements for the aircraft’s life cycle.\r\n" author: - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: 'Huxol A, Villmer F-J. Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2015:207-218.' apa: 'Huxol, A., & Villmer, F.-J. (2015). Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 207–218). Lemgo.' bjps: 'Huxol A and Villmer F-J (2015) Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 207–218.' chicago: 'Huxol, Andrea, and Franz-Josef Villmer. “Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 207–18. Lemgo, 2015.' chicago-de: 'Huxol, Andrea und Franz-Josef Villmer. 2015. Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 207–218. Lemgo.' din1505-2-1: 'Huxol, Andrea ; Villmer, Franz-Josef: Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2015, S. 207–218' havard: 'A. Huxol, F.-J. Villmer, Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2015: pp. 207–218.' ieee: 'A. Huxol and F.-J. Villmer, “Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies,” in Production Engineering and Management, Trieste, Italy, 2015, no. 1, pp. 207–218.' mla: 'Huxol, Andrea, and Franz-Josef Villmer. “Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2015, pp. 207–18.' short: 'A. Huxol, F.-J. Villmer, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2015, pp. 207–218.' ufg: 'Huxol, Andrea/Villmer, Franz-Josef (2015): Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 207–218.' van: 'Huxol A, Villmer F-J. Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2015. p. 207–18.' conference: end_date: 2015-10-02 location: Trieste, Italy name: Proceedings5th International Conference start_date: 2015-10-01 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-19T07:26:35Z date_updated: 2023-03-15T13:50:03Z department: - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer issue: '1' keyword: - Additive manufacturing - topology optimization - aerospace - life cycle costs language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf oa: '1' page: 207-218 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-941645-11-0 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf status: public title: 'Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies' type: conference user_id: '45673' year: 2015 ... --- _id: '599' abstract: - lang: eng text: "Order picking has long been identified as the most labor costly and intensively activity in warehouse management. The orders from the customers need to be fulfilled tightly and timely. In order to keep the required high service level, the warehouse has to increase the picking productivity under the constraints of limited capacity. This paper concerns a man-togoods order picking system, in which the order pickers have to drive with a pallet jack to the storage locations. Considering that the orders are mostly small orders which consist of less lines, it is efficient to combine severalsingle customer orders into one picking order. Under this circumstance, this paper intends to answer the question of how customer orders should be grouped into picking orders with the aim of minimizing the total travel length through the warehouse. Consequently the productivity of the order picking system can be improved. An optimization problem for order batching is introduced. The optimization method of order batching is then proposed. Based on the simulation of different scenarios of incoming orders, it can be concluded that the developed method is effective in improving the productivity of the concerned order picking system.\r\n" author: - first_name: Li full_name: Li, Li id: '58482' last_name: Li - first_name: L. full_name: Schulze, L. last_name: Schulze citation: ama: 'Li L, Schulze L. Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2015:319-326.' apa: Li, L., & Schulze, L. (2015). Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 319–326). Lemgo. bjps: Li L and Schulze L (2015) Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 319–326. chicago: Li, Li, and L. Schulze. “Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 319–26. Lemgo, 2015. chicago-de: 'Li, Li und L. Schulze. 2015. Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 319–326. Lemgo.' din1505-2-1: 'Li, Li ; Schulze, L.: Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2015, S. 319–326' havard: 'L. Li, L. Schulze, Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2015: pp. 319–326.' ieee: L. Li and L. Schulze, “Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching,” in Production Engineering and Management, Trieste, Italy, 2015, no. 1, pp. 319–326. mla: Li, Li, and L. Schulze. “Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2015, pp. 319–26. short: 'L. Li, L. Schulze, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2015, pp. 319–326.' ufg: 'Li, Li/Schulze, L. (2015): Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 319–326.' van: 'Li L, Schulze L. Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2015. p. 319–26.' conference: end_date: 2015-10-02 location: Trieste, Italy name: Proceedings5th International Conference start_date: 2015-10-01 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-19T07:34:56Z date_updated: 2023-03-15T13:50:03Z department: - _id: DEP7000 - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer issue: '1' keyword: - Order picking - man-to-goods - order batching - picking productivity - genetic algorithm language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf oa: '1' page: 319-326 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-941645-11-0 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf status: public title: Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching type: conference user_id: '45673' year: 2015 ... --- _id: '335' abstract: - lang: eng text: "The University of Trieste (Università degli Studi di Trieste) and the Ostwestfalen-Lippe University of Applied Sciences introduced the International Double Degree Master Program ‘Production Engineering and Management’ in 2011. Its aim is to give students in Italy and Germany, along with other countries, the chance to learn the necessary abilities from lecturers and each other. This Master Program has been accompanied by the International Conference ‘Production Engineering and Management’ from the very beginning. The annual International Conference on Production Engineering and Management took place for the fifth time this year, and can therefore be considered a well-established event originating from the partnership between the University of Trieste (Italy) and the Ostwestfalen-Lippe \r\nUniversity of Applied Sciences (Germany). The main aim of the five conferences has been to bridge the gap between production engineering and management theory and practice, by offering a platform where academia and industry could discuss practical and pressing questions. In this respect, the fifth conference (PEM 2015) continues along the same path of the first four successful conferences, which were held in Pordenone (2011), Lemgo (2012), Trieste (2013) and again in Lemgo (2014). PEM 2015 benefited further from contributions from other universities and from research and industry projects. Especially the contributions of successful graduates of the double degree Master’s program Production Engineering and Management and those of other postgraduate researchers from several European count ries have been enforced in this year. The title ‘An active interaction between university and industry’ introduced two years ago to emphasize lively cooperation proved to be more than appropriate in the conference’s main orientation:\r\n\r\n•\tTo present current research projects and their results at a highly sophisticated scientific level\r\n•\tTo discuss recent developments in industry and society\r\n•\tTo bring professionals, specialists and students together\r\n•\tTo enable professionals, lecturers and professors to exchange experiences\r\n•\tTo familiarize young professionals and students with scientific conference procedures\r\n•\tTo give postgraduate and Ph.D. students the chance to present a paper\r\n•\tTo show the two partner regions’ uniqueness and performance\r\n•\tTo attract students for an international career in the industry\r\n•\tTo encourage students to be open-minded about different cultures, mentalities and manners\r\n\r\nPEM 2015 took place between October 1 and 2, 2015 at the University of \r\nTrieste. The program was defined by the Organizing and Scientific Committees and clustered into five scientific sessions. Both universities and their partner organizations debated on these topics by reporting their research, experiences and success stories. The scientific sessions dealt with technical and engineering issues, as well as management topics, and included contributions by researchers from academia and industry. The extended abstracts and full papers of the \r\ncontributions underwent a double-blind review process. The 35 accepted presentations were assigned, according to their subject, to one of the following sessions:, ‘Industrial Engineering and Lean Management’, ‘Technology and Supporting Services for Manufacturing’, ‘Product Lifecycle, from Concept to Market and Use’, ‘Supply Chain Design and Management’ and ‘Management Practices and Methodologies’. These sessions have been carefully selected by the organizing and scientific committees and are aimed at highlighting some of the current production industry’s most discussed topics. Therefore, the articles sustainability and revolutionary developments in modern industry and cover not only production in a narrower sense, but also new aspects of: innovation and \r\nproduct development, of supply chains, of quality improvement. The proceedings have been drawn together to form 35 full papers of the scientific contributions. The articles were reviewed by the Scientific Committee before being accepted. \r\nAs the editors of the proceedings, we would like to thank all contributors, the \r\nreferees who accepted the burden of reviewing the abstracts as well as the full papers and the members of the Organizing Committee and Scientific Committee for planning such an effective conference." citation: ama: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management. Vol 11.; 2015:418. apa: Padoano, E., Villmer, F.-J., Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe (Eds.). (2015). Production Engineering and Management (Vol. 11, Issue ., p. 418). bjps: Padoano E et al. (eds) (2015) Production Engineering and Management. Lemgo. chicago: Padoano, Elio, Franz-Josef Villmer, Department of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management. Vol. 11. Schriftenreihe Logistik. Lemgo, 2015. chicago-de: Padoano, Elio, Franz-Josef Villmer, Department of Production Engineering and Management, und Hochschule Ostwestfalen-Lippe, Hrsg. 2015. Production Engineering and Management. Bd. 11. Schriftenreihe Logistik. Lemgo. din1505-2-1: 'Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management ; Hochschule Ostwestfalen-Lippe (Hrsg.): Production Engineering and Management, Schriftenreihe Logistik. Bd. 11. Lemgo, 2015' havard: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds., Production Engineering and Management, Lemgo, 2015. ieee: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, Eds., Production Engineering and Management, vol. 11, no. . Lemgo, 2015, p. 418. mla: Padoano, Elio, et al., editors. Production Engineering and Management. no. ., 2015, p. 418. short: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds., Production Engineering and Management, Lemgo, 2015. ufg: 'Padoano, Elio u. a.: Production Engineering and Management, Bd. 11, Lemgo 2015 (Schriftenreihe Logistik).' van: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, editors. Production Engineering and Management. Lemgo; 2015. (Schriftenreihe Logistik; vol. 11). conference: end_date: 2010-10-02 location: Trieste, Italy name: 5th International Conference start_date: 2015-10-01 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2018-12-11T13:32:50Z date_updated: 2025-04-11T09:06:38Z ddc: - '650' department: - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer file: - access_level: open_access content_type: application/pdf creator: hka-zn8 date_created: 2018-12-11T13:27:43Z date_updated: 2018-12-11T13:27:43Z file_id: '336' file_name: PEM_Tagung_zusammen2015.pdf file_size: 12169441 relation: main_file success: 1 file_date_updated: 2018-12-11T13:27:43Z has_accepted_license: '1' intvolume: ' 11' issue: . language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf oa: '1' page: '418' place: Lemgo publication_identifier: isbn: - 978-3-941645-11-0 publication_status: published series_title: Schriftenreihe Logistik status: public title: Production Engineering and Management type: conference_editor user_id: '83781' volume: 11 year: '2015' ... --- _id: '589' citation: ama: Villmer F-J, Padoano E, Production Engineering and Management, eds. Production Engineering and Management. Vol 10. Lemgo; 2014:301. apa: Villmer, F.-J., Padoano, E., & Production Engineering and Management (Eds.). (2014). Production Engineering and Management (Vol. 10, p. 301). Presented at the 4th International Conference, Lemgo. bjps: Villmer F-J, Padoano E and Production Engineering and Management (eds) (2014) Production Engineering and Management. Lemgo. chicago: Villmer, Franz-Josef, Elio Padoano, and Production Engineering and Management, eds. Production Engineering and Management. Vol. 10. Schriftenreihe Logistik. Lemgo, 2014. chicago-de: Villmer, Franz-Josef, Elio Padoano und Production Engineering and Management, Hrsg. 2014. Production Engineering and Management. Bd. 10. Schriftenreihe Logistik. Lemgo. din1505-2-1: 'Villmer, F.-J. ; Padoano, E. ; Production Engineering and Management (Hrsg.): Production Engineering and Management, Schriftenreihe Logistik. Bd. 10. Lemgo, 2014' havard: F.-J. Villmer, E. Padoano, Production Engineering and Management, eds., Production Engineering and Management, Lemgo, 2014. ieee: F.-J. Villmer, E. Padoano, and Production Engineering and Management, Eds., Production Engineering and Management, vol. 10. Lemgo, 2014, p. 301. mla: Villmer, Franz-Josef, et al., editors. Production Engineering and Management. Vol. 10, 2014, p. 301. short: F.-J. Villmer, E. Padoano, Production Engineering and Management, eds., Production Engineering and Management, Lemgo, 2014. ufg: 'Villmer, Franz-Josef et. al. (Hgg.) (2014): Production Engineering and Management (=Schriftenreihe Logistik 10), Lemgo.' van: Villmer F-J, Padoano E, Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2014. (Schriftenreihe Logistik; vol. 10). conference: end_date: 2014-09-26 location: Lemgo name: 4th International Conference start_date: 2014-09-25 corporate_editor: - Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T15:12:28Z date_updated: 2023-03-15T13:50:02Z ddc: - '650' department: - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano file: - access_level: open_access content_type: application/pdf creator: hka-zn8 date_created: 2019-03-13T08:33:58Z date_updated: 2019-03-13T08:33:58Z file_id: '724' file_name: PEM 2014_Proceeding_V04.pdf file_size: 8527360 relation: main_file success: 1 file_date_updated: 2019-03-13T08:33:58Z has_accepted_license: '1' intvolume: ' 10' language: - iso: eng oa: '1' page: '301' place: Lemgo publication_identifier: isbn: - 978-3-941645-10-3 publication_status: published related_material: link: - relation: table_of_contents url: https://d-nb.info/1063109302/04 series_title: Schriftenreihe Logistik status: public title: Production Engineering and Management type: conference_editor user_id: '45673' volume: 10 year: 2014 ... --- _id: '725' citation: ama: Padoano E, Villmer F-J, Production Engineering and Management, eds. Production Engineering and Management. Vol 9. Lemgo; 2013:282. apa: Padoano, E., Villmer, F.-J., & Production Engineering and Management (Eds.). (2013). Production Engineering and Management (Vol. 9, p. 282). Presented at the 3th international conference, Lemgo. bjps: Padoano E, Villmer F-J and Production Engineering and Management (eds) (2013) Production Engineering and Management. Lemgo. chicago: Padoano, Elio, Franz-Josef Villmer, and Production Engineering and Management, eds. Production Engineering and Management. Vol. 9. Schriftenreihe Logistik. Lemgo, 2013. chicago-de: Padoano, Elio, Franz-Josef Villmer und Production Engineering and Management, Hrsg. 2013. Production Engineering and Management. Bd. 9. Schriftenreihe Logistik. Lemgo. din1505-2-1: 'Padoano, E. ; Villmer, F.-J. ; Production Engineering and Management (Hrsg.): Production Engineering and Management, Schriftenreihe Logistik. Bd. 9. Lemgo, 2013' havard: E. Padoano, F.-J. Villmer, Production Engineering and Management, eds., Production Engineering and Management, Lemgo, 2013. ieee: E. Padoano, F.-J. Villmer, and Production Engineering and Management, Eds., Production Engineering and Management, vol. 9. Lemgo, 2013, p. 282. mla: Padoano, Elio, et al., editors. Production Engineering and Management. Vol. 9, 2013, p. 282. short: E. Padoano, F.-J. Villmer, Production Engineering and Management, eds., Production Engineering and Management, Lemgo, 2013. ufg: 'Padoano, Elio et. al. (Hgg.) (2013): Production Engineering and Management (=Schriftenreihe Logistik 9), Lemgo.' van: Padoano E, Villmer F-J, Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2013. (Schriftenreihe Logistik; vol. 9). conference: end_date: 2013-09-27 location: Trieste, Italy name: 3th international conference start_date: 2013-09-26 corporate_editor: - Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T15:12:28Z date_updated: 2023-03-15T13:50:09Z ddc: - '650' department: - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer file: - access_level: open_access content_type: application/pdf creator: hka-zn8 date_created: 2019-03-13T08:38:52Z date_updated: 2019-03-13T08:38:52Z file_id: '726' file_name: PEM 2013_Proceedings_Druckversion.pdf file_size: 8969103 relation: main_file success: 1 file_date_updated: 2019-03-13T08:38:52Z has_accepted_license: '1' intvolume: ' 9' language: - iso: eng oa: '1' page: '282' place: Lemgo publication_identifier: isbn: - 978-3-941645-09-7 publication_status: published series_title: Schriftenreihe Logistik status: public title: Production Engineering and Management type: conference_editor user_id: '45673' volume: 9 year: 2013 ...