[{"publisher":"VDE Verlag","quality_controlled":"1","department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"conference":{"location":"Online","name":"International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management","start_date":"2021-05-03","end_date":"2021-05-07"},"abstract":[{"text":"In this paper a highly efficient 5 kW three-phase power factor correction (PFC) converter used as an active infeed converter (AIC) for an industrial DC grid is addressed. The converter operates at 100 kHz and the nominal DC bus voltage is 650 V. The DC grid the AIC is designed for is a conductor system with distributed DC link capacitors and intelligent energy storages alongside the conductor. Due to the use of intelligent energy storages, which meet the energy demand when load transients occur, it is possible to optimize the AIC for a lower power to ensure maximum system efficiency. The design of the hardware and controller is described and measurements of characteristic currents and voltages, efficiency over the whole load range and controller responses on load transients are shown.","lang":"eng"}],"publication_status":"published","place":"Berlin","_id":"8412","user_id":"79260","type":"conference_editor_article","status":"public","main_file_link":[{"open_access":"1","url":"https://ieeexplore.ieee.org/document/9472429"}],"year":2021,"author":[{"full_name":"Koch, Jan-Niklas","last_name":"Koch","id":"58889","first_name":"Jan-Niklas"},{"last_name":"Otte","first_name":"Raphael","full_name":"Otte, Raphael","id":"51830"},{"id":"1693","last_name":"Borcherding","first_name":"Holger","full_name":"Borcherding, Holger"}],"citation":{"ieee":"J.-N. Koch, R. Otte, and H. Borcherding, Highly Efficient SiC-based Active Infeed Converter for Industrial DC Conductor Systems. Berlin: VDE Verlag, 2021.","ama":"Koch J-N, Otte R, Borcherding H. Highly Efficient SiC-Based Active Infeed Converter for Industrial DC Conductor Systems. Berlin: VDE Verlag; 2021.","din1505-2-1":"Koch, Jan-Niklas ; Otte, Raphael ; Borcherding, Holger: Highly Efficient SiC-based Active Infeed Converter for Industrial DC Conductor Systems. Berlin : VDE Verlag, 2021","chicago-de":"Koch, Jan-Niklas, Raphael Otte und Holger Borcherding. 2021. Highly Efficient SiC-based Active Infeed Converter for Industrial DC Conductor Systems. PCIM Europe digital days 2021; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management. Berlin: VDE Verlag.","short":"J.-N. Koch, R. Otte, H. Borcherding, Highly Efficient SiC-Based Active Infeed Converter for Industrial DC Conductor Systems, VDE Verlag, Berlin, 2021.","chicago":"Koch, Jan-Niklas, Raphael Otte, and Holger Borcherding. Highly Efficient SiC-Based Active Infeed Converter for Industrial DC Conductor Systems. PCIM Europe Digital Days 2021; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management. Berlin: VDE Verlag, 2021.","apa":"Koch, J.-N., Otte, R., & Borcherding, H. (2021). Highly Efficient SiC-based Active Infeed Converter for Industrial DC Conductor Systems. PCIM Europe digital days 2021; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management. Berlin: VDE Verlag.","bjps":"Koch J-N, Otte R and Borcherding H (2021) Highly Efficient SiC-Based Active Infeed Converter for Industrial DC Conductor Systems. Berlin: VDE Verlag.","mla":"Koch, Jan-Niklas, et al. “Highly Efficient SiC-Based Active Infeed Converter for Industrial DC Conductor Systems.” PCIM Europe Digital Days 2021; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, VDE Verlag, 2021.","havard":"J.-N. Koch, R. Otte, H. Borcherding, Highly Efficient SiC-based Active Infeed Converter for Industrial DC Conductor Systems, VDE Verlag, Berlin, 2021.","ufg":"Koch, Jan-Niklas et. al. (2021): Highly Efficient SiC-based Active Infeed Converter for Industrial DC Conductor Systems, Berlin.","van":"Koch J-N, Otte R, Borcherding H. Highly Efficient SiC-based Active Infeed Converter for Industrial DC Conductor Systems. PCIM Europe digital days 2021; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management. Berlin: VDE Verlag; 2021."},"title":"Highly Efficient SiC-based Active Infeed Converter for Industrial DC Conductor Systems","language":[{"iso":"eng"}],"oa":"1","date_updated":"2023-03-15T13:50:15Z","publication_identifier":{"isbn":["978-3-8007-5515-8"]},"publication":"PCIM Europe digital days 2021; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management","date_created":"2022-07-05T07:25:24Z"},{"publication_identifier":{"isbn":["978-3-446-47174-0"]},"type":"book","date_created":"2022-07-05T07:56:17Z","user_id":"64800","date_updated":"2023-03-15T13:50:15Z","editor":[{"full_name":"Alexander, Sauer","first_name":"Sauer","last_name":"Alexander"}],"language":[{"iso":"eng"}],"_id":"8413","title":"The DC-Factory - Energy efficient. Robust. Forward-looking ","citation":{"din1505-2-1":"Borcherding, Holger ; Austermann, Johann ; Spanier, Patrick ; Sauer, Alexander ; Alexander, S. (Hrsg.): The DC-Factory - Energy efficient. Robust. Forward-looking : Hanser, 2021","chicago-de":"Borcherding, Holger, Johann Austermann, Patrick Spanier und Alexander Sauer. 2021. The DC-Factory - Energy efficient. Robust. Forward-looking . Hg. von Sauer Alexander. Hanser.","short":"H. Borcherding, J. Austermann, P. Spanier, A. Sauer, The DC-Factory - Energy Efficient. Robust. Forward-Looking , Hanser, 2021.","chicago":"Borcherding, Holger, Johann Austermann, Patrick Spanier, and Alexander Sauer. The DC-Factory - Energy Efficient. Robust. Forward-Looking . Edited by Sauer Alexander. Hanser, 2021.","apa":"Borcherding, H., Austermann, J., Spanier, P., & Sauer, A. (2021). The DC-Factory - Energy efficient. Robust. Forward-looking . (S. Alexander, Ed.). Hanser.","ieee":"H. Borcherding, J. Austermann, P. Spanier, and A. Sauer, The DC-Factory - Energy efficient. Robust. Forward-looking . Hanser, 2021.","ufg":"Borcherding, Holger et. al. (2021): The DC-Factory - Energy efficient. Robust. Forward-looking .","havard":"H. Borcherding, J. Austermann, P. Spanier, A. Sauer, The DC-Factory - Energy efficient. Robust. Forward-looking , Hanser, 2021.","mla":"Borcherding, Holger, et al. The DC-Factory - Energy Efficient. Robust. Forward-Looking . Edited by Sauer Alexander, Hanser, 2021.","bjps":"Borcherding H et al. (2021) The DC-Factory - Energy Efficient. Robust. Forward-Looking , Alexander S (ed.). Hanser.","van":"Borcherding H, Austermann J, Spanier P, Sauer A. The DC-Factory - Energy efficient. Robust. Forward-looking . Alexander S, editor. Hanser; 2021. 214 p.","ama":"Borcherding H, Austermann J, Spanier P, Sauer A. The DC-Factory - Energy Efficient. Robust. Forward-Looking . (Alexander S, ed.). Hanser; 2021."},"publication_status":"published","year":2021,"main_file_link":[{"url":"https://www.hanser-elibrary.com/doi/10.3139/9783446471795"}],"author":[{"full_name":"Borcherding, Holger","id":"1693","last_name":"Borcherding","first_name":"Holger"},{"last_name":"Austermann","first_name":"Johann","id":"42114","full_name":"Austermann, Johann"},{"first_name":"Patrick","id":"43516","full_name":"Spanier, Patrick","last_name":"Spanier"},{"first_name":"Alexander","last_name":"Sauer","full_name":"Sauer, Alexander"}],"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"abstract":[{"lang":"eng","text":"The DC-Factory\r\nThe energy revolution has many facets. One of them is the power supply of factories. Here lies the origin of the upheaval in drive technology, which today is already based on direct current, while the grid supplies alternating current. In this book you will learn the advantages of building a comprehensive direct current factory network into which all power generators feed their energy and from which all consumers are supplied directly.\r\n\r\nAll related conceptual, economic, technical and organizational issues are dealt within this book:\r\n- Potential and economic assessment of the direct current factory in comparison with a current factory supplied with alternating current\r\n- System concept draft for the necessary system and device adjustments with concrete solutions for implementation\r\n- Detailed treatment of all relevant technical topics, such as topology, voltage level, supply concepts, grounding and network types, EMC, pre-charging\r\n- Characteristic-based control of a direct current network with different supply devices and loads\r\n- Guarantee of network stability, even with highly dynamic loads and without additional communication\r\n- Treatment of essential security aspects\r\n- Planning and design of a direct current network in your own factory, including presentation of the planning tasks and instructions for the user"}],"status":"public","page":"214","publisher":"Hanser"},{"title":"Heatsink design for direct double-sided liquid cooling of SiC power semiconductors","citation":{"ama":"Borcherding H, Cepin S. Heatsink Design for Direct Double-Sided Liquid Cooling of SiC Power Semiconductors.; 2021.","van":"Borcherding H, Cepin S. Heatsink design for direct double-sided liquid cooling of SiC power semiconductors. 2021.","mla":"Borcherding, Holger, and Simon Cepin. Heatsink Design for Direct Double-Sided Liquid Cooling of SiC Power Semiconductors. 2021.","havard":"H. Borcherding, S. Cepin, Heatsink design for direct double-sided liquid cooling of SiC power semiconductors, 2021.","bjps":"Borcherding H and Cepin S (2021) Heatsink Design for Direct Double-Sided Liquid Cooling of SiC Power Semiconductors. .","ufg":"Borcherding, Holger/Cepin, Simon (2021): Heatsink design for direct double-sided liquid cooling of SiC power semiconductors.","ieee":"H. Borcherding and S. Cepin, Heatsink design for direct double-sided liquid cooling of SiC power semiconductors. 2021.","apa":"Borcherding, H., & Cepin, S. (2021). Heatsink design for direct double-sided liquid cooling of SiC power semiconductors. Presented at the 13th Expert Forum Electric Vehicle Drives (E-Motive), online.","chicago":"Borcherding, Holger, and Simon Cepin. Heatsink Design for Direct Double-Sided Liquid Cooling of SiC Power Semiconductors, 2021.","short":"H. Borcherding, S. Cepin, Heatsink Design for Direct Double-Sided Liquid Cooling of SiC Power Semiconductors, 2021.","din1505-2-1":"Borcherding, Holger ; Cepin, Simon: Heatsink design for direct double-sided liquid cooling of SiC power semiconductors, 2021","chicago-de":"Borcherding, Holger und Simon Cepin. 2021. Heatsink design for direct double-sided liquid cooling of SiC power semiconductors."},"publication_status":"published","year":2021,"author":[{"last_name":"Borcherding","first_name":"Holger","id":"1693","full_name":"Borcherding, Holger"},{"last_name":"Cepin","first_name":"Simon","id":"52080","full_name":"Cepin, Simon"}],"conference":{"end_date":"2021-09-23","start_date":"2021-09-21","name":"13th Expert Forum Electric Vehicle Drives (E-Motive)","location":"online"},"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"status":"public","type":"conference_speech","date_created":"2022-07-05T08:03:50Z","user_id":"64800","date_updated":"2023-03-15T13:50:15Z","_id":"8415","language":[{"iso":"eng"}]},{"abstract":[{"lang":"eng","text":"Today DC offers far-reaching advantages over AC. Therefore, many devices have been equipped with an internal DC link for many years. In the field of energy supply, the use of DC technology is also growing and is state of the art in offshore, high-voltage, vehicle, data center applications. The spread of industrial open DC grids is currently starting and is completely different due to the requirements: The DC grid is highly dynamic. This means that the oscillation behavior must be investigated. The paper describes the characteristics and the limits of stability for an open industrial DC grid."}],"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"conference":{"name":"PCIM Europe digital days 2021","location":"Online","start_date":"2021-05-03","end_date":"2021-05-07"},"quality_controlled":"1","publisher":"VDE Verlag","publication_status":"published","_id":"8417","place":"Berlin","type":"conference_editor_article","user_id":"83781","main_file_link":[{"url":"https://ieeexplore.ieee.org/document/9472308"}],"year":"2021","author":[{"first_name":"Simon","last_name":"Puls","full_name":"Puls, Simon","id":"85051"},{"last_name":"Warkentin","id":"74607","full_name":"Warkentin, Slavi","first_name":"Slavi"},{"first_name":"Johann","id":"42114","full_name":"Austermann, Johann","last_name":"Austermann"},{"last_name":"Borcherding","first_name":"Holger","id":"1693","full_name":"Borcherding, Holger"}],"page":"87","status":"public","title":"Characteristics and Possible Resonant Oscillations in an Open Industrial DC grid","citation":{"ieee":"S. Puls, S. Warkentin, J. Austermann, and H. Borcherding, Characteristics and Possible Resonant Oscillations in an Open Industrial DC grid. Berlin: VDE Verlag, 2021, p. 87.","ama":"Puls S, Warkentin S, Austermann J, Borcherding H. Characteristics and Possible Resonant Oscillations in an Open Industrial DC Grid. (Mesago Messe Frankfurt GmbH, ed.). VDE Verlag; 2021:87.","chicago-de":"Puls, Simon, Slavi Warkentin, Johann Austermann und Holger Borcherding. 2021. Characteristics and Possible Resonant Oscillations in an Open Industrial DC grid. Hg. von Mesago Messe Frankfurt GmbH. PCIM Europe digital days 2021; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management. Berlin: VDE Verlag.","din1505-2-1":"Puls, Simon ; Warkentin, Slavi ; Austermann, Johann ; Borcherding, Holger ; Mesago Messe Frankfurt GmbH (Hrsg.): Characteristics and Possible Resonant Oscillations in an Open Industrial DC grid. Berlin : VDE Verlag, 2021","short":"S. Puls, S. Warkentin, J. Austermann, H. Borcherding, Characteristics and Possible Resonant Oscillations in an Open Industrial DC Grid, VDE Verlag, Berlin, 2021.","chicago":"Puls, Simon, Slavi Warkentin, Johann Austermann, and Holger Borcherding. Characteristics and Possible Resonant Oscillations in an Open Industrial DC Grid. Edited by Mesago Messe Frankfurt GmbH. PCIM Europe Digital Days 2021; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management. Berlin: VDE Verlag, 2021.","apa":"Puls, S., Warkentin, S., Austermann, J., & Borcherding, H. (2021). Characteristics and Possible Resonant Oscillations in an Open Industrial DC grid. In Mesago Messe Frankfurt GmbH (Ed.), PCIM Europe digital days 2021; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (p. 87). VDE Verlag.","ufg":"Puls, Simon u. a.: Characteristics and Possible Resonant Oscillations in an Open Industrial DC grid, hg. von Mesago Messe Frankfurt GmbH, Berlin 2021.","mla":"Puls, Simon, et al. “Characteristics and Possible Resonant Oscillations in an Open Industrial DC Grid.” PCIM Europe Digital Days 2021; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, edited by Mesago Messe Frankfurt GmbH, VDE Verlag, 2021, p. 87.","havard":"S. Puls, S. Warkentin, J. Austermann, H. Borcherding, Characteristics and Possible Resonant Oscillations in an Open Industrial DC grid, VDE Verlag, Berlin, 2021.","bjps":"Puls S et al. (2021) Characteristics and Possible Resonant Oscillations in an Open Industrial DC Grid, Mesago Messe Frankfurt GmbH (ed.). Berlin: VDE Verlag.","van":"Puls S, Warkentin S, Austermann J, Borcherding H. Characteristics and Possible Resonant Oscillations in an Open Industrial DC grid. Mesago Messe Frankfurt GmbH, editor. PCIM Europe digital days 2021; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management. Berlin: VDE Verlag; 2021."},"language":[{"iso":"eng"}],"date_created":"2022-07-05T08:11:42Z","publication_identifier":{"eisbn":["978-3-8007-5515-8"]},"publication":"PCIM Europe digital days 2021; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management","corporate_editor":["Mesago Messe Frankfurt GmbH"],"date_updated":"2023-09-22T08:22:40Z","related_material":{"link":[{"relation":"confirmation","url":"https://www.vde-verlag.de/buecher/565515/pcim-europe-digital-days-2021.html"}]}},{"citation":{"mla":"Borcherding, Holger, et al. “Potential Hazards of Transient Overvoltages in an Industrial DC Grid and Basic Protective Measures.” 2021 22nd IEEE International Conference on Industrial Technology (ICIT), edited by Institute of Electrical and Electronics Engineers, IEEE, 2021, pp. 625–30, https://doi.org/10.1109/ICIT46573.2021.9453597.","havard":"H. Borcherding, J. Austermann, S. Puls, Potential Hazards of Transient Overvoltages in an Industrial DC Grid and Basic Protective Measures, IEEE, [Piscataway, NJ], 2021.","bjps":"Borcherding H, Austermann J and Puls S (2021) Potential Hazards of Transient Overvoltages in an Industrial DC Grid and Basic Protective Measures, Institute of Electrical and Electronics Engineers (ed.). [Piscataway, NJ]: IEEE.","ufg":"Borcherding, Holger/Austermann, Johann/Puls, Simon: Potential Hazards of Transient Overvoltages in an Industrial DC Grid and Basic Protective Measures, hg. von Institute of Electrical and Electronics Engineers, [Piscataway, NJ] 2021 (IEEE International Conference on Industrial Technology).","ama":"Borcherding H, Austermann J, Puls S. Potential Hazards of Transient Overvoltages in an Industrial DC Grid and Basic Protective Measures. (Institute of Electrical and Electronics Engineers, ed.). IEEE; 2021:625-630. doi:10.1109/ICIT46573.2021.9453597","van":"Borcherding H, Austermann J, Puls S. Potential Hazards of Transient Overvoltages in an Industrial DC Grid and Basic Protective Measures. Institute of Electrical and Electronics Engineers, editor. 2021 22nd IEEE International Conference on Industrial Technology (ICIT). [Piscataway, NJ]: IEEE; 2021. (IEEE International Conference on Industrial Technology).","chicago":"Borcherding, Holger, Johann Austermann, and Simon Puls. Potential Hazards of Transient Overvoltages in an Industrial DC Grid and Basic Protective Measures. Edited by Institute of Electrical and Electronics Engineers. 2021 22nd IEEE International Conference on Industrial Technology (ICIT). IEEE International Conference on Industrial Technology. [Piscataway, NJ]: IEEE, 2021. https://doi.org/10.1109/ICIT46573.2021.9453597.","ieee":"H. Borcherding, J. Austermann, and S. Puls, Potential Hazards of Transient Overvoltages in an Industrial DC Grid and Basic Protective Measures. [Piscataway, NJ]: IEEE, 2021, pp. 625–630. doi: 10.1109/ICIT46573.2021.9453597.","apa":"Borcherding, H., Austermann, J., & Puls, S. (2021). Potential Hazards of Transient Overvoltages in an Industrial DC Grid and Basic Protective Measures. In Institute of Electrical and Electronics Engineers (Ed.), 2021 22nd IEEE International Conference on Industrial Technology (ICIT) (pp. 625–630). IEEE. https://doi.org/10.1109/ICIT46573.2021.9453597","din1505-2-1":"Borcherding, Holger ; Austermann, Johann ; Puls, Simon ; Institute of Electrical and Electronics Engineers (Hrsg.): Potential Hazards of Transient Overvoltages in an Industrial DC Grid and Basic Protective Measures, IEEE International Conference on Industrial Technology. [Piscataway, NJ] : IEEE, 2021","chicago-de":"Borcherding, Holger, Johann Austermann und Simon Puls. 2021. Potential Hazards of Transient Overvoltages in an Industrial DC Grid and Basic Protective Measures. Hg. von Institute of Electrical and Electronics Engineers. 2021 22nd IEEE International Conference on Industrial Technology (ICIT). IEEE International Conference on Industrial Technology. [Piscataway, NJ]: IEEE. doi:10.1109/ICIT46573.2021.9453597, .","short":"H. Borcherding, J. Austermann, S. Puls, Potential Hazards of Transient Overvoltages in an Industrial DC Grid and Basic Protective Measures, IEEE, [Piscataway, NJ], 2021."},"title":"Potential Hazards of Transient Overvoltages in an Industrial DC Grid and Basic Protective Measures","page":"625-630","status":"public","author":[{"id":"1693","first_name":"Holger","full_name":"Borcherding, Holger","last_name":"Borcherding"},{"id":"42114","first_name":"Johann","full_name":"Austermann, Johann","last_name":"Austermann"},{"last_name":"Puls","first_name":"Simon","id":"85051","full_name":"Puls, Simon"}],"year":"2021","date_updated":"2025-06-26T13:35:32Z","corporate_editor":["Institute of Electrical and Electronics Engineers"],"date_created":"2022-07-05T13:18:45Z","publication":"2021 22nd IEEE International Conference on Industrial Technology (ICIT)","publication_identifier":{"isbn":["978-1-7281-5730-6"],"issn":["2643-2978"],"eisbn":["978-1-7281-5729-0 "]},"language":[{"iso":"eng"}],"keyword":["drive inverters","DC grid","overvoltage protection","DC grid faults"],"publication_status":"published","series_title":"IEEE International Conference on Industrial Technology","quality_controlled":"1","publisher":"IEEE","conference":{"end_date":"2021-03-12","start_date":"2021-03-10","location":"Valencia, Spain; Online","name":"22nd IEEE International Conference on Industrial Technology (ICIT)"},"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"abstract":[{"text":"This article highlights the special electrical properties of an industrial DC grid and compares it with other typical DC grids. In this article, the extent of transient overvoltages is presented, which must be assumed to be caused by grid faults and switching operations. Basic measures for the protection of devices are listed and evaluated.\r\n\r\nThe article clarifies that basic protection is necessary for the reliable operation of devices in industrial DC grids, but is easy to implement.","lang":"eng"}],"user_id":"83781","type":"conference_editor_article","place":"[Piscataway, NJ]","doi":"10.1109/ICIT46573.2021.9453597","_id":"8430"},{"publication_identifier":{"eisbn":["978-90-75815-37-5 "],"issn":["2325-0313"],"isbn":["978-1-6654-3384-6"]},"publication":"2021 23rd European Conference on Power Electronics and Applications (EPE’21 ECCE Europe)","date_created":"2022-07-05T13:52:33Z","date_updated":"2025-06-26T13:28:00Z","keyword":["DC power supply","Fault handling strategy","Short circuit","Grid-connected inverter","DC machine"],"language":[{"iso":"eng"}],"title":"EFFECTS OF COMPONENT FAILURES IN DRIVE INVERTERS DURING PARALLEL OPERATING ON AN OPEN INDUSTRIAL DC GRID","citation":{"short":"H. Borcherding, F. Blank, O. Grünberg, J. Höflsauer, S. Puls, EFFECTS OF COMPONENT FAILURES IN DRIVE INVERTERS DURING PARALLEL OPERATING ON AN OPEN INDUSTRIAL DC GRID, IEEE, 2021.","din1505-2-1":"Borcherding, Holger ; Blank, Frederic ; Grünberg, Olaf ; Höflsauer, Josef ; Puls, Simon: EFFECTS OF COMPONENT FAILURES IN DRIVE INVERTERS DURING PARALLEL OPERATING ON AN OPEN INDUSTRIAL DC GRID, European Conference on Power Electronics and Applications : IEEE, 2021","chicago-de":"Borcherding, Holger, Frederic Blank, Olaf Grünberg, Josef Höflsauer und Simon Puls. 2021. EFFECTS OF COMPONENT FAILURES IN DRIVE INVERTERS DURING PARALLEL OPERATING ON AN OPEN INDUSTRIAL DC GRID. 2021 23rd European Conference on Power Electronics and Applications (EPE’21 ECCE Europe). European Conference on Power Electronics and Applications. IEEE. doi:10.23919/EPE21ECCEEurope50061.2021.9570706, .","apa":"Borcherding, H., Blank, F., Grünberg, O., Höflsauer, J., & Puls, S. (2021). EFFECTS OF COMPONENT FAILURES IN DRIVE INVERTERS DURING PARALLEL OPERATING ON AN OPEN INDUSTRIAL DC GRID. In 2021 23rd European Conference on Power Electronics and Applications (EPE’21 ECCE Europe). 23rd European Conference on Power Electronics and Applications (EPE ECCE Europe), Virtuell. IEEE. https://doi.org/10.23919/EPE21ECCEEurope50061.2021.9570706","chicago":"Borcherding, Holger, Frederic Blank, Olaf Grünberg, Josef Höflsauer, and Simon Puls. EFFECTS OF COMPONENT FAILURES IN DRIVE INVERTERS DURING PARALLEL OPERATING ON AN OPEN INDUSTRIAL DC GRID. 2021 23rd European Conference on Power Electronics and Applications (EPE’21 ECCE Europe). European Conference on Power Electronics and Applications. IEEE, 2021. https://doi.org/10.23919/EPE21ECCEEurope50061.2021.9570706.","van":"Borcherding H, Blank F, Grünberg O, Höflsauer J, Puls S. EFFECTS OF COMPONENT FAILURES IN DRIVE INVERTERS DURING PARALLEL OPERATING ON AN OPEN INDUSTRIAL DC GRID. 2021 23rd European Conference on Power Electronics and Applications (EPE’21 ECCE Europe). IEEE; 2021. (European Conference on Power Electronics and Applications).","ufg":"Borcherding, Holger u. a.: EFFECTS OF COMPONENT FAILURES IN DRIVE INVERTERS DURING PARALLEL OPERATING ON AN OPEN INDUSTRIAL DC GRID, o. O. 2021 (European Conference on Power Electronics and Applications).","bjps":"Borcherding H et al. (2021) EFFECTS OF COMPONENT FAILURES IN DRIVE INVERTERS DURING PARALLEL OPERATING ON AN OPEN INDUSTRIAL DC GRID. IEEE.","mla":"Borcherding, Holger, et al. “EFFECTS OF COMPONENT FAILURES IN DRIVE INVERTERS DURING PARALLEL OPERATING ON AN OPEN INDUSTRIAL DC GRID.” 2021 23rd European Conference on Power Electronics and Applications (EPE’21 ECCE Europe), IEEE, 2021, https://doi.org/10.23919/EPE21ECCEEurope50061.2021.9570706.","havard":"H. Borcherding, F. Blank, O. Grünberg, J. Höflsauer, S. Puls, EFFECTS OF COMPONENT FAILURES IN DRIVE INVERTERS DURING PARALLEL OPERATING ON AN OPEN INDUSTRIAL DC GRID, IEEE, 2021.","ieee":"H. Borcherding, F. Blank, O. Grünberg, J. Höflsauer, and S. Puls, EFFECTS OF COMPONENT FAILURES IN DRIVE INVERTERS DURING PARALLEL OPERATING ON AN OPEN INDUSTRIAL DC GRID. IEEE, 2021. doi: 10.23919/EPE21ECCEEurope50061.2021.9570706.","ama":"Borcherding H, Blank F, Grünberg O, Höflsauer J, Puls S. EFFECTS OF COMPONENT FAILURES IN DRIVE INVERTERS DURING PARALLEL OPERATING ON AN OPEN INDUSTRIAL DC GRID. IEEE; 2021. doi:10.23919/EPE21ECCEEurope50061.2021.9570706"},"external_id":{"isi":["000832143902098"]},"author":[{"first_name":"Holger","full_name":"Borcherding, Holger","id":"1693","last_name":"Borcherding"},{"first_name":"Frederic","full_name":"Blank, Frederic","last_name":"Blank"},{"first_name":"Olaf","last_name":"Grünberg","full_name":"Grünberg, Olaf"},{"full_name":"Höflsauer, Josef","first_name":"Josef","last_name":"Höflsauer"},{"full_name":"Puls, Simon","last_name":"Puls","first_name":"Simon"}],"year":"2021","status":"public","type":"conference_editor_article","user_id":"83781","_id":"8434","doi":"10.23919/EPE21ECCEEurope50061.2021.9570706","isi":"1","series_title":"European Conference on Power Electronics and Applications","publication_status":"published","abstract":[{"text":"An open industrial DCgrid for energy supply has many benefits. Also new challenges arise by coupling the DClink capacitors of all devices, e.g. inverters. This paper presents the effects of component failures causing short circuit faults in combination with electrically coupled and charged DClink capacitors. Resulting energy flows are shown, which arise in the DCgrid in case of faults. In addition, measurements of short circuit tests and two solutions are shown, which enable the safe and simple operation of an open industrial DCgrid.","lang":"eng"}],"conference":{"start_date":"2021-09-06","end_date":"2021-09-10","name":"23rd European Conference on Power Electronics and Applications (EPE ECCE Europe)","location":"Virtuell"},"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"publisher":"IEEE","quality_controlled":"1"},{"type":"conference_editor_article","user_id":"79260","doi":"10.26352/F318_2384-9509","_id":"5620","place":"Bologna","series_title":"Filodiritto Editore – 10th International Conference New Perspectives in Science Education","publication_status":"published","department":[{"_id":"DEP5000"},{"_id":"DEP5023"}],"conference":{"location":"Virtual Event","name":"NEW PERSPECTIVES IN SCIENCE EDUCATION 10th Edition","start_date":"2021-03-18","end_date":"2021-03-19"},"quality_controlled":"1","publisher":"Libreriauniversitaria.it","date_created":"2021-04-19T13:32:10Z","publication_identifier":{"isbn":["979-12-80225-14-6"]},"publication":"New Perspectives in Science Education","date_updated":"2023-03-15T13:50:00Z","oa":"1","language":[{"iso":"eng"}],"title":"AI-Based Stem Education: Generating Individualized Exercises in Mathematics","citation":{"ama":"Lange-Hegermann M, Schmohl T, Watanabe A, Heiss S, Rubart J. AI-Based Stem Education: Generating Individualized Exercises in Mathematics. Bologna: Libreriauniversitaria.it; 2021:385-390. doi:10.26352/F318_2384-9509","ieee":"M. Lange-Hegermann, T. Schmohl, A. Watanabe, S. Heiss, and J. Rubart, AI-Based Stem Education: Generating Individualized Exercises in Mathematics. Bologna: Libreriauniversitaria.it, 2021, pp. 385–390.","chicago-de":"Lange-Hegermann, Markus, Tobias Schmohl, Alice Watanabe, Stefan Heiss und Jessica Rubart. 2021. AI-Based Stem Education: Generating Individualized Exercises in Mathematics. New Perspectives in Science Education. Filodiritto Editore – 10th International Conference New Perspectives in Science Education. Bologna: Libreriauniversitaria.it. doi:10.26352/F318_2384-9509, .","din1505-2-1":"Lange-Hegermann, Markus ; Schmohl, Tobias ; Watanabe, Alice ; Heiss, Stefan ; Rubart, Jessica: AI-Based Stem Education: Generating Individualized Exercises in Mathematics, Filodiritto Editore – 10th International Conference New Perspectives in Science Education. Bologna : Libreriauniversitaria.it, 2021","short":"M. Lange-Hegermann, T. Schmohl, A. Watanabe, S. Heiss, J. Rubart, AI-Based Stem Education: Generating Individualized Exercises in Mathematics, Libreriauniversitaria.it, Bologna, 2021.","ufg":"Lange-Hegermann, Markus et. al. (2021): AI-Based Stem Education: Generating Individualized Exercises in Mathematics (=Filodiritto Editore – 10th International Conference New Perspectives in Science Education), Bologna.","mla":"Lange-Hegermann, Markus, et al. “AI-Based Stem Education: Generating Individualized Exercises in Mathematics.” New Perspectives in Science Education, Libreriauniversitaria.it, 2021, pp. 385–90, doi:10.26352/F318_2384-9509.","bjps":"Lange-Hegermann M et al. (2021) AI-Based Stem Education: Generating Individualized Exercises in Mathematics. Bologna: Libreriauniversitaria.it.","havard":"M. Lange-Hegermann, T. Schmohl, A. Watanabe, S. Heiss, J. Rubart, AI-Based Stem Education: Generating Individualized Exercises in Mathematics, Libreriauniversitaria.it, Bologna, 2021.","van":"Lange-Hegermann M, Schmohl T, Watanabe A, Heiss S, Rubart J. AI-Based Stem Education: Generating Individualized Exercises in Mathematics. New Perspectives in Science Education. Bologna: Libreriauniversitaria.it; 2021. (Filodiritto Editore – 10th International Conference New Perspectives in Science Education).","chicago":"Lange-Hegermann, Markus, Tobias Schmohl, Alice Watanabe, Stefan Heiss, and Jessica Rubart. AI-Based Stem Education: Generating Individualized Exercises in Mathematics. New Perspectives in Science Education. Filodiritto Editore – 10th International Conference New Perspectives in Science Education. Bologna: Libreriauniversitaria.it, 2021. https://doi.org/10.26352/F318_2384-9509.","apa":"Lange-Hegermann, M., Schmohl, T., Watanabe, A., Heiss, S., & Rubart, J. (2021). AI-Based Stem Education: Generating Individualized Exercises in Mathematics. New Perspectives in Science Education (pp. 385–390). Bologna: Libreriauniversitaria.it. https://doi.org/10.26352/F318_2384-9509"},"year":2021,"main_file_link":[{"open_access":"1","url":"https://conference.pixel-online.net/NPSE/files/npse/ed0010/FP/6790-STEM4992-FP-NPSE10.pdf"}],"author":[{"full_name":"Lange-Hegermann, Markus","last_name":"Lange-Hegermann","first_name":"Markus","id":"71761"},{"orcid":"https://orcid.org/0000-0002-7043-5582","last_name":"Schmohl","id":"71782","full_name":"Schmohl, Tobias","first_name":"Tobias"},{"full_name":"Watanabe, Alice","first_name":"Alice","id":"76856","last_name":"Watanabe"},{"last_name":"Heiss","id":"1031","full_name":"Heiss, Stefan","first_name":"Stefan"},{"first_name":"Jessica","last_name":"Rubart","id":"45672","full_name":"Rubart, Jessica"}],"page":"385 - 390","status":"public"},{"page":"84-85","status":"public","publisher":"MAX Verlag","department":[{"_id":"DEP1303"},{"_id":"DEP1055"}],"year":2021,"author":[{"last_name":"Hall","first_name":"Oliver","full_name":"Hall, Oliver","id":"27136"},{"orcid":"0000-0002-8841-9345","first_name":"Marcel","last_name":"Cardinali","full_name":"Cardinali, Marcel","id":"58462"}],"main_file_link":[{"url":"https://www.yumpu.com/news/de/ausgabe/93071-max-magazin-ausgabe-012021"}],"issue":"1","publication_status":"published","volume":2021,"citation":{"chicago":"Hall, Oliver, and Marcel Cardinali. “Die neue Balance zwischen Stadt und Land.” MAX Magazin 2021, no. 1 (2021): 84–85.","apa":"Hall, O., & Cardinali, M. (2021). Die neue Balance zwischen Stadt und Land. MAX Magazin, 2021(1), 84–85.","ieee":"O. Hall and M. Cardinali, “Die neue Balance zwischen Stadt und Land,” MAX Magazin, vol. 2021, no. 1, pp. 84–85, 2021.","ufg":"Hall, Oliver/Cardinali, Marcel (2021): Die neue Balance zwischen Stadt und Land, in: MAX Magazin 2021 (1), S. 84–85.","mla":"Hall, Oliver, and Marcel Cardinali. “Die neue Balance zwischen Stadt und Land.” MAX Magazin, vol. 2021, no. 1, MAX Verlag, 2021, pp. 84–85.","havard":"O. Hall, M. Cardinali, Die neue Balance zwischen Stadt und Land, MAX Magazin. 2021 (2021) 84–85.","bjps":"Hall O and Cardinali M (2021) Die neue Balance zwischen Stadt und Land. MAX Magazin 2021, 84–85.","van":"Hall O, Cardinali M. Die neue Balance zwischen Stadt und Land. MAX Magazin. 2021;2021(1):84–5.","ama":"Hall O, Cardinali M. Die neue Balance zwischen Stadt und Land. MAX Magazin. 2021;2021(1):84-85.","din1505-2-1":"Hall, Oliver ; Cardinali, Marcel: Die neue Balance zwischen Stadt und Land. In: MAX Magazin Bd. 2021. Hamburg, MAX Verlag (2021), Nr. 1, S. 84–85","chicago-de":"Hall, Oliver und Marcel Cardinali. 2021. Die neue Balance zwischen Stadt und Land. MAX Magazin 2021, Nr. 1: 84–85.","short":"O. Hall, M. Cardinali, MAX Magazin 2021 (2021) 84–85."},"title":"Die neue Balance zwischen Stadt und Land","language":[{"iso":"ger"}],"place":"Hamburg","_id":"5777","popular_science":"1","date_updated":"2023-03-15T13:50:01Z","user_id":"45673","intvolume":" 2021","type":"journal_article","date_created":"2021-05-02T12:34:19Z","publication":"MAX Magazin"},{"page":"46-69","status":"public","main_file_link":[{"url":"https://op.europa.eu/en/publication-detail/-/publication/d7d496b5-ad4e-11eb-9767-01aa75ed71a1/language-en/format-PDF/source-206665393","open_access":"1"}],"year":2021,"author":[{"first_name":"Julita","full_name":"Skodra, Julita","last_name":"Skodra"},{"last_name":"Connop","full_name":"Connop, Stuart","first_name":"Stuart"},{"first_name":"Jean-Marc","full_name":"Tacnet, Jean-Marc","last_name":"Tacnet"},{"last_name":"Van Cauwenbergh","first_name":"Nora","full_name":"Van Cauwenbergh, Nora"},{"last_name":"Almassy","first_name":"D.","full_name":"Almassy, D."},{"last_name":"Baldacchini","full_name":"Baldacchini, C.","first_name":"C."},{"last_name":"Basco Carrera","first_name":"L.","full_name":"Basco Carrera, L."},{"first_name":"B.","last_name":"Caitana","full_name":"Caitana, B."},{"orcid":"0000-0002-8841-9345","full_name":"Cardinali, Marcel","id":"58462","last_name":"Cardinali","first_name":"Marcel"},{"last_name":"Feliu","first_name":"E.","full_name":"Feliu, E."},{"last_name":"Garcia","full_name":"Garcia, I.","first_name":"I."},{"first_name":"G.","full_name":"Garcia-Blanco, G.","last_name":"Garcia-Blanco"},{"last_name":"Jones","full_name":"Jones, G.","first_name":"G."},{"first_name":"L.","full_name":"Kraus, L.","last_name":"Kraus"},{"last_name":"Mahmoud","full_name":"Mahmoud, I.","first_name":"I."},{"full_name":"Maia, S.","last_name":"Maia","first_name":"S."},{"first_name":"E.","last_name":"Morello","full_name":"Morello, E."},{"first_name":"B.","full_name":"Pérez Lapena, B.","last_name":"Pérez Lapena"},{"first_name":"L.","full_name":"Pinter, L.","last_name":"Pinter"},{"first_name":"F.","last_name":"Porcu","full_name":"Porcu, F."},{"last_name":"Reichborn-Kjennerud","first_name":"K.","full_name":"Reichborn-Kjennerud, K."},{"last_name":"Ruangpan","full_name":"Ruangpan, L.","first_name":"L."},{"last_name":"Rutzinger","first_name":"M.","full_name":"Rutzinger, M."},{"first_name":"Z.","full_name":"Vojinovic, Z.","last_name":"Vojinovic"}],"citation":{"short":"J. Skodra, S. Connop, J.-M. Tacnet, N. Van Cauwenbergh, D. Almassy, C. Baldacchini, L. Basco Carrera, B. Caitana, M. Cardinali, E. Feliu, I. Garcia, G. Garcia-Blanco, G. Jones, L. Kraus, I. Mahmoud, S. Maia, E. Morello, B. Pérez Lapena, L. Pinter, F. Porcu, K. Reichborn-Kjennerud, L. Ruangpan, M. Rutzinger, Z. Vojinovic, in: A. Dumitru, L. Wendling, European Commission (Eds.), Evaluating the Impact of Nature-Based Solutions. A Handbook for Practitioners, 1st ed., Publications Office of the European Union, Brussels, 2021, pp. 46–69.","din1505-2-1":"Skodra, Julita ; Connop, Stuart ; Tacnet, Jean-Marc ; Van Cauwenbergh, Nora ; Almassy, D. ; Baldacchini, C. ; Basco Carrera, L. ; Caitana, B. ; u. a.: Principles Guiding NBS Performance and Impact Evaluation. In: Dumitru, A. ; Wendling, L. ; European Commission (Hrsg.): Evaluating the impact of nature-based solutions. A handbook for practitioners. 1. Aufl. Brussels : Publications Office of the European Union, 2021, S. 46–69","chicago-de":"Skodra, Julita, Stuart Connop, Jean-Marc Tacnet, Nora Van Cauwenbergh, D. Almassy, C. Baldacchini, L. Basco Carrera, u. a. 2021. Principles Guiding NBS Performance and Impact Evaluation. In: Evaluating the impact of nature-based solutions. A handbook for practitioners, hg. von Adina Dumitru, Laura Wendling, und European Commission, 46–69. 1. Aufl. Brussels: Publications Office of the European Union. doi:10.2777/244577, .","van":"Skodra J, Connop S, Tacnet J-M, Van Cauwenbergh N, Almassy D, Baldacchini C, et al. Principles Guiding NBS Performance and Impact Evaluation. In: Dumitru A, Wendling L, European Commission, editors. Evaluating the impact of nature-based solutions A handbook for practitioners. 1st ed. Brussels: Publications Office of the European Union; 2021. p. 46–69.","mla":"Skodra, Julita, et al. “Principles Guiding NBS Performance and Impact Evaluation.” Evaluating the Impact of Nature-Based Solutions. A Handbook for Practitioners, edited by Adina Dumitru et al., 1st ed., Publications Office of the European Union, 2021, pp. 46–69, doi:10.2777/244577.","bjps":"Skodra J et al. (2021) Principles Guiding NBS Performance and Impact Evaluation. In Dumitru A, Wendling L and European Commission (eds), Evaluating the Impact of Nature-Based Solutions. A Handbook for Practitioners, 1st ed. Brussels: Publications Office of the European Union, pp. 46–69.","havard":"J. Skodra, S. Connop, J.-M. Tacnet, N. Van Cauwenbergh, D. Almassy, C. Baldacchini, L. Basco Carrera, B. Caitana, M. Cardinali, E. Feliu, I. Garcia, G. Garcia-Blanco, G. Jones, L. Kraus, I. Mahmoud, S. Maia, E. Morello, B. Pérez Lapena, L. Pinter, F. Porcu, K. Reichborn-Kjennerud, L. Ruangpan, M. Rutzinger, Z. Vojinovic, Principles Guiding NBS Performance and Impact Evaluation, in: A. Dumitru, L. Wendling, European Commission (Eds.), Evaluating the Impact of Nature-Based Solutions. A Handbook for Practitioners, 1st ed., Publications Office of the European Union, Brussels, 2021: pp. 46–69.","ufg":"Skodra, Julita et. al. (2021): Principles Guiding NBS Performance and Impact Evaluation, in: Adina Dumitru et. al. (Hgg.): Evaluating the impact of nature-based solutions. A handbook for practitioners, Brussels, 1, S. 46–69.","apa":"Skodra, J., Connop, S., Tacnet, J.-M., Van Cauwenbergh, N., Almassy, D., Baldacchini, C., … Vojinovic, Z. (2021). Principles Guiding NBS Performance and Impact Evaluation. In A. Dumitru, L. Wendling, & European Commission (Eds.), Evaluating the impact of nature-based solutions. A handbook for practitioners (1st ed., pp. 46–69). Brussels: Publications Office of the European Union. https://doi.org/10.2777/244577","chicago":"Skodra, Julita, Stuart Connop, Jean-Marc Tacnet, Nora Van Cauwenbergh, D. Almassy, C. Baldacchini, L. Basco Carrera, et al. “Principles Guiding NBS Performance and Impact Evaluation.” In Evaluating the Impact of Nature-Based Solutions. A Handbook for Practitioners, edited by Adina Dumitru, Laura Wendling, and European Commission, 1st ed., 46–69. Brussels: Publications Office of the European Union, 2021. https://doi.org/10.2777/244577.","ama":"Skodra J, Connop S, Tacnet J-M, et al. Principles Guiding NBS Performance and Impact Evaluation. In: Dumitru A, Wendling L, European Commission, eds. Evaluating the Impact of Nature-Based Solutions. A Handbook for Practitioners. 1st ed. Brussels: Publications Office of the European Union; 2021:46-69. doi:10.2777/244577","ieee":"J. Skodra et al., “Principles Guiding NBS Performance and Impact Evaluation,” in Evaluating the impact of nature-based solutions. A handbook for practitioners, 1st ed., A. Dumitru, L. Wendling, and European Commission, Eds. Brussels: Publications Office of the European Union, 2021, pp. 46–69."},"title":"Principles Guiding NBS Performance and Impact Evaluation","language":[{"iso":"eng"}],"keyword":["atmospheric pollution","biodiversity","community resilience","database","decision-making","environmental impact","environmental indicator","environmental risk prevention","innovation","natural hazard","sustainable development","urban area","user guide","waste management"],"oa":"1","file_date_updated":"2021-05-06T08:11:08Z","editor":[{"first_name":"Adina","full_name":"Dumitru, Adina","last_name":"Dumitru"},{"last_name":"Wendling","first_name":"Laura","full_name":"Wendling, Laura"}],"corporate_editor":["European Commission"],"date_updated":"2023-03-15T13:50:02Z","edition":"1","date_created":"2021-05-06T08:13:04Z","publication":"Evaluating the impact of nature-based solutions. A handbook for practitioners","publication_identifier":{"eisbn":["978-92-76-22821-9"],"isbn":["978-92-76-22961-2"]},"quality_controlled":"1","publisher":"Publications Office of the European Union","abstract":[{"lang":"eng","text":"The Handbook aims to provide decision-makers with a comprehensive NBS impact assessment framework, and a robust set of indicators and methodologies to assess impacts of nature-based solutions across 12 societal challenge areas: Climate Resilience; Water Management; Natural and Climate Hazards; Green Space Management; Biodiversity; Air Quality; Place Regeneration; Knowledge and Social Capacity Building for Sustainable Urban Transformation; Participatory Planning and Governance; Social Justice and Social Cohesion; Health and Well-being; New Economic Opportunities and Green Jobs. Indicators have been developed collaboratively by representatives of 17 individual EU-funded NBS projects and collaborating institutions such as the EEA and JRC, as part of the European Taskforce for NBS Impact Assessment, with the four-fold objective of: serving as a reference for relevant EU policies and activities; orient urban practitioners in developing robust impact evaluation frameworks for nature-based solutions at different scales; expand upon the pioneering work of the EKLIPSE framework by providing a comprehensive set of indicators and methodologies; and build the European evidence base regarding NBS impacts. They reflect the state of the art in current scientific research on impacts of nature-based solutions and valid and standardized methods of assessment, as well as the state of play in urban implementation of evaluation frameworks."}],"department":[{"_id":"DEP1303"},{"_id":"DEP1000"},{"_id":"DEP1055"}],"ddc":["710"],"file":[{"creator":"edu-dd0","relation":"main_file","date_updated":"2021-05-06T08:11:08Z","file_id":"5818","file_size":51133801,"file_name":"KI0420586ENN.en.pdf","content_type":"application/pdf","date_created":"2021-05-06T08:11:08Z","access_level":"open_access"}],"publication_status":"published","doi":"10.2777/244577","_id":"5817","place":"Brussels","has_accepted_license":"1","license":"https://creativecommons.org/licenses/by/4.0/","user_id":"45673","type":"book_chapter"},{"corporate_editor":["European Commission"],"file_date_updated":"2021-05-06T08:32:39Z","editor":[{"full_name":"Adina, Dumitru","first_name":"Dumitru","last_name":"Adina"},{"full_name":"Laura, Wendling","first_name":"Wendling","last_name":"Laura"}],"date_updated":"2023-03-15T13:50:02Z","edition":"1","publication_identifier":{"isbn":["978-92-76-22961-2"],"eisbn":["978-92-76-22821-9"]},"publication":"Evaluating the impact of nature-based solutions. A handbook for practitioners","date_created":"2021-05-06T08:32:49Z","keyword":["atmospheric pollution","biodiversity","community resilience","database","decision-making","environmental impact","environmental indicator","environmental risk prevention","innovation","natural hazard","sustainable development","urban area","user guide","waste management"],"language":[{"iso":"eng"}],"oa":"1","citation":{"ama":"Dumitru A, Garcia I, Zorita S, et al. Approaches to Monitoring and Evaluation Strategy Development. In: Adina D, Laura W, European Commission, eds. Evaluating the Impact of Nature-Based Solutions. A Handbook for Practitioners. 1st ed. Brussels: Publications Office of the European Union; 2021:78-104. doi:10.2777/244577","van":"Dumitru A, Garcia I, Zorita S, Tomé-Lourido D, Cardinali M, Feliu E, et al. Approaches to Monitoring and Evaluation Strategy Development. In: Adina D, Laura W, European Commission, editors. Evaluating the impact of nature-based solutions A handbook for practitioners. 1st ed. Brussels: Publications Office of the European Union; 2021. p. 78–104.","havard":"A. Dumitru, I. Garcia, S. Zorita, D. Tomé-Lourido, M. Cardinali, E. Feliu, J. Fermoso, G. Ferilli, G. Guidolotti, K. Hölscher, M. Lodder, K. Reichborn-Kjennerud, V. Rinta-Hiiro, S. Maia, Approaches to Monitoring and Evaluation Strategy Development, in: D. Adina, W. Laura, European Commission (Eds.), Evaluating the Impact of Nature-Based Solutions. A Handbook for Practitioners, 1st ed., Publications Office of the European Union, Brussels, 2021: pp. 78–104.","bjps":"Dumitru A et al. (2021) Approaches to Monitoring and Evaluation Strategy Development. In Adina D, Laura W and European Commission (eds), Evaluating the Impact of Nature-Based Solutions. A Handbook for Practitioners, 1st ed. Brussels: Publications Office of the European Union, pp. 78–104.","mla":"Dumitru, Adina, et al. “Approaches to Monitoring and Evaluation Strategy Development.” Evaluating the Impact of Nature-Based Solutions. A Handbook for Practitioners, edited by Dumitru Adina et al., 1st ed., Publications Office of the European Union, 2021, pp. 78–104, doi:10.2777/244577.","ufg":"Dumitru, Adina et. al. (2021): Approaches to Monitoring and Evaluation Strategy Development, in: Dumitru Adina et. al. (Hgg.): Evaluating the impact of nature-based solutions. A handbook for practitioners, Brussels, 1, S. 78–104.","ieee":"A. Dumitru et al., “Approaches to Monitoring and Evaluation Strategy Development,” in Evaluating the impact of nature-based solutions. A handbook for practitioners, 1st ed., D. Adina, W. Laura, and European Commission, Eds. Brussels: Publications Office of the European Union, 2021, pp. 78–104.","apa":"Dumitru, A., Garcia, I., Zorita, S., Tomé-Lourido, D., Cardinali, M., Feliu, E., … Maia, S. (2021). Approaches to Monitoring and Evaluation Strategy Development. In D. Adina, W. Laura, & European Commission (Eds.), Evaluating the impact of nature-based solutions. A handbook for practitioners (1st ed., pp. 78–104). Brussels: Publications Office of the European Union. https://doi.org/10.2777/244577","chicago":"Dumitru, Adina, Igone Garcia, Saioa Zorita, Davidé Tomé-Lourido, Marcel Cardinali, E. Feliu, J. Fermoso, et al. “Approaches to Monitoring and Evaluation Strategy Development.” In Evaluating the Impact of Nature-Based Solutions. A Handbook for Practitioners, edited by Dumitru Adina, Wendling Laura, and European Commission, 1st ed., 78–104. Brussels: Publications Office of the European Union, 2021. https://doi.org/10.2777/244577.","short":"A. Dumitru, I. Garcia, S. Zorita, D. Tomé-Lourido, M. Cardinali, E. Feliu, J. Fermoso, G. Ferilli, G. Guidolotti, K. Hölscher, M. Lodder, K. Reichborn-Kjennerud, V. Rinta-Hiiro, S. Maia, in: D. Adina, W. Laura, European Commission (Eds.), Evaluating the Impact of Nature-Based Solutions. A Handbook for Practitioners, 1st ed., Publications Office of the European Union, Brussels, 2021, pp. 78–104.","din1505-2-1":"Dumitru, Adina ; Garcia, Igone ; Zorita, Saioa ; Tomé-Lourido, Davidé ; Cardinali, Marcel ; Feliu, E. ; Fermoso, J. ; Ferilli, G. ; u. a.: Approaches to Monitoring and Evaluation Strategy Development. In: Adina, D. ; Laura, W. ; European Commission (Hrsg.): Evaluating the impact of nature-based solutions. A handbook for practitioners. 1. Aufl. Brussels : Publications Office of the European Union, 2021, S. 78–104","chicago-de":"Dumitru, Adina, Igone Garcia, Saioa Zorita, Davidé Tomé-Lourido, Marcel Cardinali, E. Feliu, J. Fermoso, u. a. 2021. Approaches to Monitoring and Evaluation Strategy Development. In: Evaluating the impact of nature-based solutions. A handbook for practitioners, hg. von Dumitru Adina, Wendling Laura, und European Commission, 78–104. 1. Aufl. Brussels: Publications Office of the European Union. doi:10.2777/244577, ."},"title":"Approaches to Monitoring and Evaluation Strategy Development","status":"public","page":"78-104","main_file_link":[{"url":"https://op.europa.eu/en/publication-detail/-/publication/d7d496b5-ad4e-11eb-9767-01aa75ed71a1/language-en/format-PDF/source-206665393","open_access":"1"}],"year":2021,"author":[{"first_name":"Adina","full_name":"Dumitru, Adina","last_name":"Dumitru"},{"last_name":"Garcia","first_name":"Igone","full_name":"Garcia, Igone"},{"first_name":"Saioa","last_name":"Zorita","full_name":"Zorita, Saioa"},{"last_name":"Tomé-Lourido","full_name":"Tomé-Lourido, Davidé","first_name":"Davidé"},{"orcid":"0000-0002-8841-9345","full_name":"Cardinali, Marcel","last_name":"Cardinali","id":"58462","first_name":"Marcel"},{"first_name":"E.","full_name":"Feliu, E.","last_name":"Feliu"},{"full_name":"Fermoso, J.","first_name":"J.","last_name":"Fermoso"},{"last_name":"Ferilli","first_name":"G.","full_name":"Ferilli, G."},{"full_name":"Guidolotti, G.","first_name":"G.","last_name":"Guidolotti"},{"first_name":"K.","full_name":"Hölscher, K.","last_name":"Hölscher"},{"full_name":"Lodder, M.","first_name":"M.","last_name":"Lodder"},{"full_name":"Reichborn-Kjennerud, K.","first_name":"K.","last_name":"Reichborn-Kjennerud"},{"last_name":"Rinta-Hiiro","full_name":"Rinta-Hiiro, V.","first_name":"V."},{"full_name":"Maia, S.","last_name":"Maia","first_name":"S."}],"user_id":"45673","type":"book_chapter","_id":"5821","doi":"10.2777/244577","place":"Brussels","has_accepted_license":"1","file":[{"access_level":"open_access","date_updated":"2021-05-06T08:32:39Z","creator":"edu-dd0","relation":"main_file","content_type":"application/pdf","file_name":"KI0420586ENN.en.pdf","date_created":"2021-05-06T08:32:39Z","file_size":51133801,"file_id":"5822"}],"publication_status":"published","publisher":"Publications Office of the European Union","quality_controlled":"1","abstract":[{"text":"The Handbook aims to provide decision-makers with a comprehensive NBS impact assessment framework, and a robust set of indicators and methodologies to assess impacts of nature-based solutions across 12 societal challenge areas: Climate Resilience; Water Management; Natural and Climate Hazards; Green Space Management; Biodiversity; Air Quality; Place Regeneration; Knowledge and Social Capacity Building for Sustainable Urban Transformation; Participatory Planning and Governance; Social Justice and Social Cohesion; Health and Well-being; New Economic Opportunities and Green Jobs. Indicators have been developed collaboratively by representatives of 17 individual EU-funded NBS projects and collaborating institutions such as the EEA and JRC, as part of the European Taskforce for NBS Impact Assessment, with the four-fold objective of: serving as a reference for relevant EU policies and activities; orient urban practitioners in developing robust impact evaluation frameworks for nature-based solutions at different scales; expand upon the pioneering work of the EKLIPSE framework by providing a comprehensive set of indicators and methodologies; and build the European evidence base regarding NBS impacts. They reflect the state of the art in current scientific research on impacts of nature-based solutions and valid and standardized methods of assessment, as well as the state of play in urban implementation of evaluation frameworks.","lang":"eng"}],"ddc":["710"],"department":[{"_id":"DEP1303"},{"_id":"DEP1000"},{"_id":"DEP1055"}]},{"publication_status":"published","file":[{"access_level":"open_access","date_updated":"2021-05-06T08:46:02Z","creator":"edu-dd0","relation":"main_file","date_created":"2021-05-06T08:46:02Z","content_type":"application/pdf","file_name":"KI0220861ENN.en.pdf","file_size":13472805,"file_id":"5825"}],"abstract":[{"lang":"eng","text":"The Handbook aims to provide decision-makers with a comprehensive NBS impact assessment framework, and a robust set of indicators and methodologies to assess impacts of nature-based solutions across 12 societal challenge areas: Climate Resilience; Water Management; Natural and Climate Hazards; Green Space Management; Biodiversity; Air Quality; Place Regeneration; Knowledge and Social Capacity Building for Sustainable Urban Transformation; Participatory Planning and Governance; Social Justice and Social Cohesion; Health and Well-being; New Economic Opportunities and Green Jobs. Indicators have been developed collaboratively by representatives of 17 individual EU-funded NBS projects and collaborating institutions such as the EEA and JRC, as part of the European Taskforce for NBS Impact Assessment, with the four-fold objective of: serving as a reference for relevant EU policies and activities; orient urban practitioners in developing robust impact evaluation frameworks for nature-based solutions at different scales; expand upon the pioneering work of the EKLIPSE framework by providing a comprehensive set of indicators and methodologies; and build the European evidence base regarding NBS impacts. They reflect the state of the art in current scientific research on impacts of nature-based solutions and valid and standardized methods of assessment, as well as the state of play in urban implementation of evaluation frameworks."}],"ddc":["710"],"department":[{"_id":"DEP1303"},{"_id":"DEP1000"},{"_id":"DEP1055"}],"publisher":"Publications Office of the European Union","type":"book_chapter","user_id":"45673","has_accepted_license":"1","_id":"5824","doi":"10.2777/11361","place":"Brussels","title":"Contributors to Indicators of NBS Performance and Impact Assessment","citation":{"van":"Cardinali M. Contributors to Indicators of NBS Performance and Impact Assessment. In: Adina D, Laura W, European Commission, editors. Evaluating the Impact of Nature-based Solutions: Appendix of Methods. 1st ed. Brussels: Publications Office of the European Union; 2021.","ufg":"Cardinali, Marcel (2021): Contributors to Indicators of NBS Performance and Impact Assessment, in: Dumitru Adina et. al. (Hgg.): Evaluating the Impact of Nature-based Solutions: Appendix of Methods, Brussels, 1.","bjps":"Cardinali M (2021) Contributors to Indicators of NBS Performance and Impact Assessment. In Adina D, Laura W and European Commission (eds), Evaluating the Impact of Nature-Based Solutions: Appendix of Methods, 1st ed. Brussels: Publications Office of the European Union.","havard":"M. Cardinali, Contributors to Indicators of NBS Performance and Impact Assessment, in: D. Adina, W. Laura, European Commission (Eds.), Evaluating the Impact of Nature-Based Solutions: Appendix of Methods, 1st ed., Publications Office of the European Union, Brussels, 2021.","mla":"Cardinali, Marcel. “Contributors to Indicators of NBS Performance and Impact Assessment.” Evaluating the Impact of Nature-Based Solutions: Appendix of Methods, edited by Dumitru Adina et al., 1st ed., Publications Office of the European Union, 2021, doi:10.2777/11361.","apa":"Cardinali, M. (2021). Contributors to Indicators of NBS Performance and Impact Assessment. In D. Adina, W. Laura, & European Commission (Eds.), Evaluating the Impact of Nature-based Solutions: Appendix of Methods (1st ed.). Brussels: Publications Office of the European Union. https://doi.org/10.2777/11361","chicago":"Cardinali, Marcel. “Contributors to Indicators of NBS Performance and Impact Assessment.” In Evaluating the Impact of Nature-Based Solutions: Appendix of Methods, edited by Dumitru Adina, Wendling Laura, and European Commission, 1st ed. Brussels: Publications Office of the European Union, 2021. https://doi.org/10.2777/11361.","short":"M. Cardinali, in: D. Adina, W. Laura, European Commission (Eds.), Evaluating the Impact of Nature-Based Solutions: Appendix of Methods, 1st ed., Publications Office of the European Union, Brussels, 2021.","chicago-de":"Cardinali, Marcel. 2021. Contributors to Indicators of NBS Performance and Impact Assessment. In: Evaluating the Impact of Nature-based Solutions: Appendix of Methods, hg. von Dumitru Adina, Wendling Laura, und European Commission. 1. Aufl. Brussels: Publications Office of the European Union. doi:10.2777/11361, .","din1505-2-1":"Cardinali, Marcel: Contributors to Indicators of NBS Performance and Impact Assessment. In: Adina, D. ; Laura, W. ; European Commission (Hrsg.): Evaluating the Impact of Nature-based Solutions: Appendix of Methods. 1. Aufl. Brussels : Publications Office of the European Union, 2021","ama":"Cardinali M. Contributors to Indicators of NBS Performance and Impact Assessment. In: Adina D, Laura W, European Commission, eds. Evaluating the Impact of Nature-Based Solutions: Appendix of Methods. 1st ed. Brussels: Publications Office of the European Union; 2021. doi:10.2777/11361","ieee":"M. Cardinali, “Contributors to Indicators of NBS Performance and Impact Assessment,” in Evaluating the Impact of Nature-based Solutions: Appendix of Methods, 1st ed., D. Adina, W. Laura, and European Commission, Eds. Brussels: Publications Office of the European Union, 2021."},"year":2021,"main_file_link":[{"open_access":"1","url":"https://op.europa.eu/en/publication-detail/-/publication/6da29d54-ad4e-11eb-9767-01aa75ed71a1/language-en/format-PDF/source-206666027"}],"author":[{"orcid":"0000-0002-8841-9345","id":"58462","first_name":"Marcel","full_name":"Cardinali, Marcel","last_name":"Cardinali"}],"status":"public","edition":"1","publication_identifier":{"isbn":["978-92-76-22960-5"]},"publication":"Evaluating the Impact of Nature-based Solutions: Appendix of Methods","date_created":"2021-05-06T08:46:07Z","corporate_editor":["European Commission"],"editor":[{"first_name":"Dumitru","full_name":"Adina, Dumitru","last_name":"Adina"},{"full_name":"Laura, Wendling","last_name":"Laura","first_name":"Wendling"}],"file_date_updated":"2021-05-06T08:46:02Z","date_updated":"2023-03-15T13:50:02Z","oa":"1","keyword":["atmospheric pollution","biodiversity","community resilience","database","decision-making","environmental impact","environmental indicator","environmental risk prevention","innovation","natural hazard","sustainable development","urban area","user guide","waste management"],"language":[{"iso":"eng"}]},{"title":"Towards a Methodology for Rethinking Modernity: Between Imagined, Realized, and Lived Space","publication_status":"published","citation":{"apa":"Milovanović, A., Dragutinovic, A., Ristić Trajković, J., & Nikezić, A. (2021). Towards a Methodology for Rethinking Modernity: Between Imagined, Realized, and Lived Space. In EAAE Annual Conference Proceedings (pp. 68–85). https://doi.org/10.51588/eaaeacp.54","chicago":"Milovanović, Aleksandra, Anica Dragutinovic, Jelena Ristić Trajković, and Ana Nikezić. “Towards a Methodology for Rethinking Modernity: Between Imagined, Realized, and Lived Space.” In EAAE Annual Conference Proceedings, 68–85, 2021. https://doi.org/10.51588/eaaeacp.54.","van":"Milovanović A, Dragutinovic A, Ristić Trajković J, Nikezić A. Towards a Methodology for Rethinking Modernity: Between Imagined, Realized, and Lived Space. In: EAAE Annual Conference Proceedings. 2021. p. 68–85.","ufg":"Milovanović, Aleksandra et. al. (2021): Towards a Methodology for Rethinking Modernity: Between Imagined, Realized, and Lived Space, in: EAAE Annual Conference Proceedings, S. 68–85.","bjps":"Milovanović A et al. (2021) Towards a Methodology for Rethinking Modernity: Between Imagined, Realized, and Lived Space. EAAE Annual Conference Proceedings. pp. 68–85.","mla":"Milovanović, Aleksandra, et al. “Towards a Methodology for Rethinking Modernity: Between Imagined, Realized, and Lived Space.” EAAE Annual Conference Proceedings, 2021, pp. 68–85, doi:10.51588/eaaeacp.54.","havard":"A. Milovanović, A. Dragutinovic, J. Ristić Trajković, A. Nikezić, Towards a Methodology for Rethinking Modernity: Between Imagined, Realized, and Lived Space, in: EAAE Annual Conference Proceedings, 2021: pp. 68–85.","short":"A. Milovanović, A. Dragutinovic, J. Ristić Trajković, A. Nikezić, in: EAAE Annual Conference Proceedings, 2021, pp. 68–85.","chicago-de":"Milovanović, Aleksandra, Anica Dragutinovic, Jelena Ristić Trajković und Ana Nikezić. 2021. Towards a Methodology for Rethinking Modernity: Between Imagined, Realized, and Lived Space. In: EAAE Annual Conference Proceedings, 68–85. doi:10.51588/eaaeacp.54, .","din1505-2-1":"Milovanović, Aleksandra ; Dragutinovic, Anica ; Ristić Trajković, Jelena ; Nikezić, Ana: Towards a Methodology for Rethinking Modernity: Between Imagined, Realized, and Lived Space. In: EAAE Annual Conference Proceedings, 2021, S. 68–85","ieee":"A. Milovanović, A. Dragutinovic, J. Ristić Trajković, and A. Nikezić, “Towards a Methodology for Rethinking Modernity: Between Imagined, Realized, and Lived Space,” in EAAE Annual Conference Proceedings, 2021, pp. 68–85.","ama":"Milovanović A, Dragutinovic A, Ristić Trajković J, Nikezić A. Towards a Methodology for Rethinking Modernity: Between Imagined, Realized, and Lived Space. In: EAAE Annual Conference Proceedings. ; 2021:68-85. doi:10.51588/eaaeacp.54"},"department":[{"_id":"DEP1055"}],"author":[{"full_name":"Milovanović, Aleksandra","first_name":"Aleksandra","last_name":"Milovanović"},{"last_name":"Dragutinovic","id":"68875","full_name":"Dragutinovic, Anica","first_name":"Anica","orcid":"https://orcid.org/0000-0002-6962-5223"},{"full_name":"Ristić Trajković, Jelena","first_name":"Jelena","last_name":"Ristić Trajković"},{"first_name":"Ana","full_name":"Nikezić, Ana","last_name":"Nikezić"}],"year":2021,"abstract":[{"lang":"eng","text":"The subject of this paper is twofold (1) towards review and revision of extra-curricular learning model in the form of a student workshop as an extended environment and a reflective arena, and (2) towards generating workshop content aimed at examining modernity in contemporary conditions of urban transformation. The paper is structured in three parts. The first part introduces the concept of an architectural workshop with a discussion of general methodological perspectives that shape this approach that takes place through three continuous stages during which students develop the process of analytical thinking, architectural programming and architectural design. The second part of the paper contextually and conceptually position the content of the workshop aimed at examining modernity in contemporary conditions of urban transformation between imagined, realized, and lived space. The third section introduces the content of two student workshops as an illustrative example of the implementation of methodology with specified assignments and substance."}],"page":"68-85","status":"public","type":"book_chapter","date_created":"2021-06-14T10:12:40Z","publication_identifier":{"issn":["2736-6200","2736-6197"]},"publication":"EAAE Annual Conference Proceedings","date_updated":"2023-03-15T13:50:03Z","user_id":"68875","language":[{"iso":"eng"}],"doi":"10.51588/eaaeacp.54","_id":"5997"},{"place":"Tokyo, Japan","_id":"6109","doi":"https://doi.org/10.25644/tjfa-t698","has_accepted_license":"1","user_id":"83781","type":"conference","quality_controlled":"1","ddc":["720"],"department":[{"_id":"DEP1000"},{"_id":"DEP1055"}],"conference":{"name":"The 16th International docomomo Conference Tokyo Japan 2020+1, Inheritable Resilience: Sharing Values of Global Modernities","location":"Tokyo, Japan","end_date":"2021-09-02","start_date":"2021-08-29"},"abstract":[{"text":"Urban decay and obsolescence of post-war mass housing is a global phenomenon. Although the reasons for housing deterioration are different, the altered relationship between public and private spaces is essential for the mass housing. The research hypothesizes that strong polarisation of the urban landscape into private and public is firmly influencing urban decay and obsolescence of post-war mass housing neighbourhoods. Taking New Belgrade blocks as the case study, the research investigates this correlation, following the gradual transformation of the urban landscape of modernity in parallel with different factors. Moreover, the research sheds light on the specific Yugoslav housing policy and developed collective self-management of the urban commons from the time of construction. Although these strategies have been neglected over the time, they are valuable for contemporary, increasing discussions on community-driven approaches for comprehending and managing change in urban environment, specifically for residential neighbourhoods. Furthermore, the research is analysing different contemporary strategies and community practices that are reinventing the public-private relationship in the context of mass housing, contributing to the development of a methodology for mitigating obsolescence and causes of housing deterioration. The methodology is revitalizing the important value of common spaces and the role of community and is reusing the modernist idea of co-creation, contributing to inheritance of the modernist concepts. Moreover, if applied, it would increase liveability of urban space and well-being of its residents, contributing to transformation strategies for adaptation to current needs, and therefore ensuring vitality of mass housing as a core typology of the Modern Movement.","lang":"eng"}],"file":[{"date_updated":"2021-09-22T19:07:36Z","creator":"5bw-b6d","relation":"main_file","file_name":"AD UP DOCOMOMO.pdf","content_type":"application/pdf","date_created":"2021-09-22T19:07:36Z","file_size":2369257,"file_id":"6487","success":1,"access_level":"open_access"}],"language":[{"iso":"eng"}],"oa":"1","date_updated":"2024-09-20T08:38:43Z","corporate_editor":["docomomo International","docomomo Japan"],"editor":[{"last_name":"Tostoes","first_name":"Ana","full_name":"Tostoes, Ana"},{"full_name":"Yamana, Yoshiyuki","first_name":"Yoshiyuki","last_name":"Yamana"}],"file_date_updated":"2021-09-22T19:07:36Z","publication":"The 16th International docomomo Conference Tokyo Japan 2020+1, Inheritable Resilience: Sharing Values of Global Modernities","publication_identifier":{"isbn":["987-4-904700-69-3"]},"date_created":"2021-09-03T15:18:42Z","status":"public","page":"340-345","year":"2021","author":[{"last_name":"Dragutinovic","full_name":"Dragutinovic, Anica","id":"68875","first_name":"Anica","orcid":"0000-0002-6962-5223"},{"full_name":"Pottgiesser, Uta","first_name":"Uta","id":"27166","last_name":"Pottgiesser","orcid":"0000-0002-8594-3168"}],"external_id":{"unknown":["SCOPUS"]},"citation":{"short":"A. Dragutinovic, U. Pottgiesser, in: A. Tostoes, Y. Yamana, docomomo International, docomomo Japan (Eds.), The 16th International Docomomo Conference Tokyo Japan 2020+1, Inheritable Resilience: Sharing Values of Global Modernities, Tokyo, Japan, 2021, pp. 340–345.","din1505-2-1":"Dragutinovic, Anica ; Pottgiesser, Uta: REUSE OF COMMON SPACE AS A TACTIC FOR MASS HOUSING REVITALIZATION. In: Tostoes, A. ; Yamana, Y. ; docomomo International ; docomomo Japan (Hrsg.): The 16th International docomomo Conference Tokyo Japan 2020+1, Inheritable Resilience: Sharing Values of Global Modernities. Bd. Book 1. Tokyo, Japan, 2021, S. 340–345","chicago-de":"Dragutinovic, Anica und Uta Pottgiesser. 2021. REUSE OF COMMON SPACE AS A TACTIC FOR MASS HOUSING REVITALIZATION. In: The 16th International docomomo Conference Tokyo Japan 2020+1, Inheritable Resilience: Sharing Values of Global Modernities, hg. von Ana Tostoes, Yoshiyuki Yamana, docomomo International, und docomomo Japan, Book 1:340–345. Tokyo, Japan. doi:https://doi.org/10.25644/tjfa-t698, .","ieee":"A. Dragutinovic and U. Pottgiesser, “REUSE OF COMMON SPACE AS A TACTIC FOR MASS HOUSING REVITALIZATION,” in The 16th International docomomo Conference Tokyo Japan 2020+1, Inheritable Resilience: Sharing Values of Global Modernities, Tokyo, Japan, 2021, vol. Book 1, pp. 340–345. doi: https://doi.org/10.25644/tjfa-t698.","apa":"Dragutinovic, A., & Pottgiesser, U. (2021). REUSE OF COMMON SPACE AS A TACTIC FOR MASS HOUSING REVITALIZATION. In A. Tostoes, Y. Yamana, docomomo International, & docomomo Japan (Eds.), The 16th International docomomo Conference Tokyo Japan 2020+1, Inheritable Resilience: Sharing Values of Global Modernities: Vol. Book 1 (pp. 340–345). https://doi.org/10.25644/tjfa-t698","chicago":"Dragutinovic, Anica, and Uta Pottgiesser. “REUSE OF COMMON SPACE AS A TACTIC FOR MASS HOUSING REVITALIZATION.” In The 16th International Docomomo Conference Tokyo Japan 2020+1, Inheritable Resilience: Sharing Values of Global Modernities, edited by Ana Tostoes, Yoshiyuki Yamana, docomomo International, and docomomo Japan, Book 1:340–45. Tokyo, Japan, 2021. https://doi.org/10.25644/tjfa-t698.","ama":"Dragutinovic A, Pottgiesser U. REUSE OF COMMON SPACE AS A TACTIC FOR MASS HOUSING REVITALIZATION. In: Tostoes A, Yamana Y, docomomo International, docomomo Japan, eds. The 16th International Docomomo Conference Tokyo Japan 2020+1, Inheritable Resilience: Sharing Values of Global Modernities. Vol Book 1. ; 2021:340-345. doi:https://doi.org/10.25644/tjfa-t698","van":"Dragutinovic A, Pottgiesser U. REUSE OF COMMON SPACE AS A TACTIC FOR MASS HOUSING REVITALIZATION. In: Tostoes A, Yamana Y, docomomo International, docomomo Japan, editors. The 16th International docomomo Conference Tokyo Japan 2020+1, Inheritable Resilience: Sharing Values of Global Modernities. Tokyo, Japan; 2021. p. 340–5.","havard":"A. Dragutinovic, U. Pottgiesser, REUSE OF COMMON SPACE AS A TACTIC FOR MASS HOUSING REVITALIZATION, in: A. Tostoes, Y. Yamana, docomomo International, docomomo Japan (Eds.), The 16th International Docomomo Conference Tokyo Japan 2020+1, Inheritable Resilience: Sharing Values of Global Modernities, Tokyo, Japan, 2021: pp. 340–345.","bjps":"Dragutinovic A and Pottgiesser U (2021) REUSE OF COMMON SPACE AS A TACTIC FOR MASS HOUSING REVITALIZATION. In Tostoes A et al. (eds), The 16th International Docomomo Conference Tokyo Japan 2020+1, Inheritable Resilience: Sharing Values of Global Modernities, vol. Book 1. Tokyo, Japan, pp. 340–345.","mla":"Dragutinovic, Anica, and Uta Pottgiesser. “REUSE OF COMMON SPACE AS A TACTIC FOR MASS HOUSING REVITALIZATION.” The 16th International Docomomo Conference Tokyo Japan 2020+1, Inheritable Resilience: Sharing Values of Global Modernities, edited by Ana Tostoes et al., vol. Book 1, 2021, pp. 340–45, https://doi.org/10.25644/tjfa-t698.","ufg":"Dragutinovic, Anica/Pottgiesser, Uta: REUSE OF COMMON SPACE AS A TACTIC FOR MASS HOUSING REVITALIZATION, in: Tostoes, Ana u. a. (Hgg.): The 16th International docomomo Conference Tokyo Japan 2020+1, Inheritable Resilience: Sharing Values of Global Modernities, Band Book 1, Tokyo, Japan 2021, S. 340–345."},"volume":"Book 1","title":"REUSE OF COMMON SPACE AS A TACTIC FOR MASS HOUSING REVITALIZATION"},{"citation":{"chicago":"Schneider, Jan, Anna Dammann_, Knut Schwarzer, and Ulrich Müller. “Pasteurisation von Getränken: Verweilzeitverteilungen in Der KZE Und Chemischer Temperatur-Zeit-Indikator Zur Prüfung von KZE-Anlagen,” 2021.","ieee":"J. Schneider, A. Dammann_, K. Schwarzer, and U. Müller, “Pasteurisation von Getränken: Verweilzeitverteilungen in der KZE und Chemischer Temperatur-Zeit-Indikator zur Prüfung von KZE-Anlagen,” presented at the Technisch-wissenschaftlicher Ausschuss der VLB, Siegen, 2021.","apa":"Schneider, J., Dammann_, A., Schwarzer, K., & Müller, U. (2021). Pasteurisation von Getränken: Verweilzeitverteilungen in der KZE und Chemischer Temperatur-Zeit-Indikator zur Prüfung von KZE-Anlagen. Technisch-wissenschaftlicher Ausschuss der VLB, Siegen.","mla":"Schneider, Jan, et al. Pasteurisation von Getränken: Verweilzeitverteilungen in Der KZE Und Chemischer Temperatur-Zeit-Indikator Zur Prüfung von KZE-Anlagen. 2021.","havard":"J. Schneider, A. Dammann_, K. Schwarzer, U. Müller, Pasteurisation von Getränken: Verweilzeitverteilungen in der KZE und Chemischer Temperatur-Zeit-Indikator zur Prüfung von KZE-Anlagen, in: 2021.","bjps":"Schneider J et al. (2021) Pasteurisation von Getränken: Verweilzeitverteilungen in Der KZE Und Chemischer Temperatur-Zeit-Indikator Zur Prüfung von KZE-Anlagen.","ufg":"Schneider, Jan u. a.: Pasteurisation von Getränken: Verweilzeitverteilungen in der KZE und Chemischer Temperatur-Zeit-Indikator zur Prüfung von KZE-Anlagen, in: o. Hg.: o. O. 2021.","ama":"Schneider J, Dammann_ A, Schwarzer K, Müller U. Pasteurisation von Getränken: Verweilzeitverteilungen in der KZE und Chemischer Temperatur-Zeit-Indikator zur Prüfung von KZE-Anlagen. In: ; 2021.","van":"Schneider J, Dammann_ A, Schwarzer K, Müller U. Pasteurisation von Getränken: Verweilzeitverteilungen in der KZE und Chemischer Temperatur-Zeit-Indikator zur Prüfung von KZE-Anlagen. In 2021.","din1505-2-1":"Schneider, Jan ; Dammann_, Anna ; Schwarzer, Knut ; Müller, Ulrich: Pasteurisation von Getränken: Verweilzeitverteilungen in der KZE und Chemischer Temperatur-Zeit-Indikator zur Prüfung von KZE-Anlagen. In: , 2021","chicago-de":"Schneider, Jan, Anna Dammann_, Knut Schwarzer und Ulrich Müller. 2021. Pasteurisation von Getränken: Verweilzeitverteilungen in der KZE und Chemischer Temperatur-Zeit-Indikator zur Prüfung von KZE-Anlagen. In: .","short":"J. Schneider, A. Dammann_, K. Schwarzer, U. Müller, in: 2021."},"title":"Pasteurisation von Getränken: Verweilzeitverteilungen in der KZE und Chemischer Temperatur-Zeit-Indikator zur Prüfung von KZE-Anlagen","status":"public","author":[{"full_name":"Schneider, Jan","last_name":"Schneider","id":"13209","first_name":"Jan","orcid":"0000-0001-6401-8873"},{"id":"43899","first_name":"Anna","last_name":"Dammann_","full_name":"Dammann_, Anna"},{"id":"13329","full_name":"Schwarzer, Knut","first_name":"Knut","last_name":"Schwarzer"},{"id":"12119","full_name":"Müller, Ulrich","first_name":"Ulrich","last_name":"Müller"}],"year":"2021","conference":{"start_date":"2012-03-05","end_date":"2012-03-05","location":"Siegen","name":"Technisch-wissenschaftlicher Ausschuss der VLB"},"department":[{"_id":"DEP4009"},{"_id":"DEP1308"},{"_id":"DEP4018"},{"_id":"DEP4028"}],"user_id":"83781","date_updated":"2025-01-30T15:43:35Z","date_created":"2021-09-07T08:49:23Z","type":"conference","_id":"6171","language":[{"iso":"eng"}]},{"_id":"11155","language":[{"iso":"eng"}],"place":"Landsberg","date_created":"2024-03-01T14:28:38Z","type":"scientific_journal_article","publication_identifier":{"issn":["0344-6166"]},"publication":"Produktion : Technik und Wirtschaft für die deutsche Industrie ","date_updated":"2024-03-05T14:28:47Z","related_material":{"link":[{"url":"https://www.wiso-net.de/dosearch?_searchOnlyInAbstractField=&_searchOnlyInTitleField=&explicitSearch=true&q=Neue+objektbasierte+I4.0-Maschinenarchitektur&x=73&y=6&dbShortcut=%3A3%3AALLEQUELLEN&searchMask=5461&TI%2CUT%2CDZ%2CBT%2COT%2CSL=&NN%2CAU%2CMM%2CZ2=&CO%2CC2%2CTA%2CKA%2CVA%2CZ1=&CT%2CZ4%2CKW=&BR%2CGW%2CN1%2CN2%2CNC%2CND%2CSC%2CWZ%2CZ5%2CAI%2CBC%2CKN%2CTN%2CVN%2CK0%2CB4%2CNW%2CVH=&Z3%2CCN%2CCE%2CKC%2CTC%2CVC=&SPRACHE-GENERATED=&DT_from=&DT_to=&timeFilterType=selected&timeFilter=NONE#","relation":"confirmation"}]},"user_id":"83781","issue":"16","department":[{"_id":"DEP5023"}],"year":"2021","author":[{"full_name":"Mankowski, Andre","first_name":"Andre","last_name":"Mankowski","id":"10880"},{"full_name":"Priss, Philip","first_name":"Philip","id":"56901","last_name":"Priss"},{"last_name":"Suton","full_name":"Suton, Jana","first_name":"Jana"},{"first_name":"Natalia","full_name":"Moriz, Natalia","id":"44238","last_name":"Moriz"},{"orcid":"0000-0002-0133-0656","first_name":"Henning","last_name":"Trsek","id":"1486","full_name":"Trsek, Henning"}],"publisher":"Verl. Moderne Industrie","page":"19","status":"public","title":"Projekt DEVEKOS nach vier Jahren erfolgreich abgeschlossen : Neue objektbasierte I4.0-Maschinenarchitektur","publication_status":"published","citation":{"din1505-2-1":"Mankowski, Andre ; Priss, Philip ; Suton, Jana ; Moriz, Natalia ; Trsek, Henning: Projekt DEVEKOS nach vier Jahren erfolgreich abgeschlossen : Neue objektbasierte I4.0-Maschinenarchitektur. In: Produktion : Technik und Wirtschaft für die deutsche Industrie . Landsberg, Verl. Moderne Industrie (2021), Nr. 16, S. 19","chicago-de":"Mankowski, Andre, Philip Priss, Jana Suton, Natalia Moriz und Henning Trsek. 2021. Projekt DEVEKOS nach vier Jahren erfolgreich abgeschlossen : Neue objektbasierte I4.0-Maschinenarchitektur. Produktion : Technik und Wirtschaft für die deutsche Industrie , Nr. 16: 19.","short":"A. Mankowski, P. Priss, J. Suton, N. Moriz, H. Trsek, Produktion : Technik Und Wirtschaft Für Die Deutsche Industrie (2021) 19.","ufg":"Mankowski, Andre u. a.: Projekt DEVEKOS nach vier Jahren erfolgreich abgeschlossen : Neue objektbasierte I4.0-Maschinenarchitektur, in: Produktion : Technik und Wirtschaft für die deutsche Industrie (2021), H. 16, S. 19.","mla":"Mankowski, Andre, et al. “Projekt DEVEKOS Nach Vier Jahren Erfolgreich Abgeschlossen : Neue Objektbasierte I4.0-Maschinenarchitektur.” Produktion : Technik Und Wirtschaft Für Die Deutsche Industrie , no. 16, 2021, p. 19.","bjps":"Mankowski A et al. (2021) Projekt DEVEKOS Nach Vier Jahren Erfolgreich Abgeschlossen : Neue Objektbasierte I4.0-Maschinenarchitektur. Produktion : Technik und Wirtschaft für die deutsche Industrie 19.","havard":"A. Mankowski, P. Priss, J. Suton, N. Moriz, H. Trsek, Projekt DEVEKOS nach vier Jahren erfolgreich abgeschlossen : Neue objektbasierte I4.0-Maschinenarchitektur, Produktion : Technik Und Wirtschaft Für Die Deutsche Industrie . (2021) 19.","van":"Mankowski A, Priss P, Suton J, Moriz N, Trsek H. Projekt DEVEKOS nach vier Jahren erfolgreich abgeschlossen : Neue objektbasierte I4.0-Maschinenarchitektur. Produktion : Technik und Wirtschaft für die deutsche Industrie . 2021;(16):19.","chicago":"Mankowski, Andre, Philip Priss, Jana Suton, Natalia Moriz, and Henning Trsek. “Projekt DEVEKOS Nach Vier Jahren Erfolgreich Abgeschlossen : Neue Objektbasierte I4.0-Maschinenarchitektur.” Produktion : Technik Und Wirtschaft Für Die Deutsche Industrie , no. 16 (2021): 19.","apa":"Mankowski, A., Priss, P., Suton, J., Moriz, N., & Trsek, H. (2021). Projekt DEVEKOS nach vier Jahren erfolgreich abgeschlossen : Neue objektbasierte I4.0-Maschinenarchitektur. Produktion : Technik Und Wirtschaft Für Die Deutsche Industrie , 16, 19.","ama":"Mankowski A, Priss P, Suton J, Moriz N, Trsek H. Projekt DEVEKOS nach vier Jahren erfolgreich abgeschlossen : Neue objektbasierte I4.0-Maschinenarchitektur. Produktion : Technik und Wirtschaft für die deutsche Industrie . 2021;(16):19.","ieee":"A. Mankowski, P. Priss, J. Suton, N. Moriz, and H. Trsek, “Projekt DEVEKOS nach vier Jahren erfolgreich abgeschlossen : Neue objektbasierte I4.0-Maschinenarchitektur,” Produktion : Technik und Wirtschaft für die deutsche Industrie , no. 16, p. 19, 2021."}},{"publication":"Shaping a globally secure Industrie 4.0 Ecosystem - Enabling international interoperable security policies","date_created":"2024-03-01T14:29:19Z","type":"conference","user_id":"83781","date_updated":"2024-03-11T14:21:42Z","oa":"1","place":"Berlin, Germany","language":[{"iso":"eng"}],"_id":"11156","title":"Secure Asset Administration Shell exchange with Distributed Ledger Technology","citation":{"ieee":"A. Bröring, A. Belyaev, H. Trsek, L. Wisniewski, and C. Diedrich, “Secure Asset Administration Shell exchange with Distributed Ledger Technology,” in Shaping a globally secure Industrie 4.0 Ecosystem - Enabling international interoperable security policies, 2021, pp. 78–91.","ama":"Bröring A, Belyaev A, Trsek H, Wisniewski L, Diedrich C. Secure Asset Administration Shell exchange with Distributed Ledger Technology. In: Shaping a Globally Secure Industrie 4.0 Ecosystem - Enabling International Interoperable Security Policies. Plattform Industrie 4.0 secretariat; 2021:78-91.","din1505-2-1":"Bröring, Andre ; Belyaev, Alexander ; Trsek, Henning ; Wisniewski, Lukasz ; Diedrich, Christian: Secure Asset Administration Shell exchange with Distributed Ledger Technology. In: Shaping a globally secure Industrie 4.0 Ecosystem - Enabling international interoperable security policies. Berlin, Germany : Plattform Industrie 4.0 secretariat, 2021, S. 78–91","chicago-de":"Bröring, Andre, Alexander Belyaev, Henning Trsek, Lukasz Wisniewski und Christian Diedrich. 2021. Secure Asset Administration Shell exchange with Distributed Ledger Technology. In: Shaping a globally secure Industrie 4.0 Ecosystem - Enabling international interoperable security policies, 78–91. Berlin, Germany: Plattform Industrie 4.0 secretariat.","short":"A. Bröring, A. Belyaev, H. Trsek, L. Wisniewski, C. Diedrich, in: Shaping a Globally Secure Industrie 4.0 Ecosystem - Enabling International Interoperable Security Policies, Plattform Industrie 4.0 secretariat, Berlin, Germany, 2021, pp. 78–91.","chicago":"Bröring, Andre, Alexander Belyaev, Henning Trsek, Lukasz Wisniewski, and Christian Diedrich. “Secure Asset Administration Shell Exchange with Distributed Ledger Technology.” In Shaping a Globally Secure Industrie 4.0 Ecosystem - Enabling International Interoperable Security Policies, 78–91. Berlin, Germany: Plattform Industrie 4.0 secretariat, 2021.","apa":"Bröring, A., Belyaev, A., Trsek, H., Wisniewski, L., & Diedrich, C. (2021). Secure Asset Administration Shell exchange with Distributed Ledger Technology. Shaping a Globally Secure Industrie 4.0 Ecosystem - Enabling International Interoperable Security Policies, 78–91.","bjps":"Bröring A et al. (2021) Secure Asset Administration Shell Exchange with Distributed Ledger Technology. Shaping a Globally Secure Industrie 4.0 Ecosystem - Enabling International Interoperable Security Policies. Berlin, Germany: Plattform Industrie 4.0 secretariat, pp. 78–91.","mla":"Bröring, Andre, et al. “Secure Asset Administration Shell Exchange with Distributed Ledger Technology.” Shaping a Globally Secure Industrie 4.0 Ecosystem - Enabling International Interoperable Security Policies, Plattform Industrie 4.0 secretariat, 2021, pp. 78–91.","havard":"A. Bröring, A. Belyaev, H. Trsek, L. Wisniewski, C. Diedrich, Secure Asset Administration Shell exchange with Distributed Ledger Technology, in: Shaping a Globally Secure Industrie 4.0 Ecosystem - Enabling International Interoperable Security Policies, Plattform Industrie 4.0 secretariat, Berlin, Germany, 2021: pp. 78–91.","ufg":"Bröring, Andre u. a.: Secure Asset Administration Shell exchange with Distributed Ledger Technology, in: o. Hg.: Shaping a globally secure Industrie 4.0 Ecosystem - Enabling international interoperable security policies, Berlin, Germany 2021, S. 78–91.","van":"Bröring A, Belyaev A, Trsek H, Wisniewski L, Diedrich C. Secure Asset Administration Shell exchange with Distributed Ledger Technology. In: Shaping a globally secure Industrie 40 Ecosystem - Enabling international interoperable security policies. Berlin, Germany: Plattform Industrie 4.0 secretariat; 2021. p. 78–91."},"publication_status":"published","main_file_link":[{"open_access":"1","url":"https://www.plattform-i40.de/IP/Redaktion/DE/Downloads/Publikation/2021-conference-volume-industrie40-security.pdf?__blob=publicationFile&v=1"}],"author":[{"last_name":"Bröring","full_name":"Bröring, Andre","id":"65130","first_name":"Andre"},{"last_name":"Belyaev","first_name":"Alexander","full_name":"Belyaev, Alexander"},{"orcid":"0000-0002-0133-0656","last_name":"Trsek","first_name":"Henning","full_name":"Trsek, Henning","id":"1486"},{"first_name":"Lukasz","full_name":"Wisniewski, Lukasz","last_name":"Wisniewski","id":"1710"},{"full_name":"Diedrich, Christian","last_name":"Diedrich","first_name":"Christian"}],"year":"2021","department":[{"_id":"DEP5023"}],"status":"public","page":"78-91","publisher":"Plattform Industrie 4.0 secretariat"},{"title":"Model-based approach for adaptive assembly assistance","citation":{"chicago-de":"Sehr, Philip, Natalia Moriz, Mario Heinz-Jakobs und Henning Trsek. 2021. Model-based approach for adaptive assembly assistance. In: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Piscataway, NJ: IEEE. doi:10.1109/ETFA45728.2021.9613614, .","din1505-2-1":"Sehr, Philip ; Moriz, Natalia ; Heinz-Jakobs, Mario ; Trsek, Henning: Model-based approach for adaptive assembly assistance. In: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Piscataway, NJ : IEEE, 2021","short":"P. Sehr, N. Moriz, M. Heinz-Jakobs, H. Trsek, in: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), IEEE, Piscataway, NJ, 2021.","ufg":"Sehr, Philip u. a.: Model-based approach for adaptive assembly assistance, in: o. Hg.: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Piscataway, NJ 2021.","mla":"Sehr, Philip, et al. “Model-Based Approach for Adaptive Assembly Assistance.” 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), IEEE, 2021, https://doi.org/10.1109/ETFA45728.2021.9613614.","bjps":"Sehr P et al. (2021) Model-Based Approach for Adaptive Assembly Assistance. 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Piscataway, NJ: IEEE.","havard":"P. Sehr, N. Moriz, M. Heinz-Jakobs, H. Trsek, Model-based approach for adaptive assembly assistance, in: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), IEEE, Piscataway, NJ, 2021.","van":"Sehr P, Moriz N, Heinz-Jakobs M, Trsek H. Model-based approach for adaptive assembly assistance. In: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Piscataway, NJ: IEEE; 2021.","ama":"Sehr P, Moriz N, Heinz-Jakobs M, Trsek H. Model-based approach for adaptive assembly assistance. In: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). IEEE; 2021. doi:10.1109/ETFA45728.2021.9613614","chicago":"Sehr, Philip, Natalia Moriz, Mario Heinz-Jakobs, and Henning Trsek. “Model-Based Approach for Adaptive Assembly Assistance.” In 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Piscataway, NJ: IEEE, 2021. https://doi.org/10.1109/ETFA45728.2021.9613614.","apa":"Sehr, P., Moriz, N., Heinz-Jakobs, M., & Trsek, H. (2021). Model-based approach for adaptive assembly assistance. 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA ), Vasteras, Sweden . https://doi.org/10.1109/ETFA45728.2021.9613614","ieee":"P. Sehr, N. Moriz, M. Heinz-Jakobs, and H. Trsek, “Model-based approach for adaptive assembly assistance,” presented at the 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA ), Vasteras, Sweden , 2021. doi: 10.1109/ETFA45728.2021.9613614."},"publication_status":"published","abstract":[{"lang":"eng","text":"In production environments, manual assembly is often used, when there is a high demand for flexibility which needs to be met economically. In this circumstance, assembly assistance systems are often used to ensure production standards. However, the individual requirements of each worker call for a way for the system to adapt towards the workers needs. This often requires modelling and configuration effort to include expert knowledge into an assistance system. This hinders an economical operation in an industrial environment. In this paper, an approach is presented, facilitating methods of online modelling, to generate a model, which represents the workers behavior during an assembly process. This behavior model is then used to deduce suitable adaptive assembly assistance in real time."}],"year":"2021","author":[{"first_name":"Philip","full_name":"Sehr, Philip","last_name":"Sehr","id":"71582"},{"first_name":"Natalia","id":"44238","full_name":"Moriz, Natalia","last_name":"Moriz"},{"last_name":"Heinz-Jakobs","first_name":"Mario","full_name":"Heinz-Jakobs, Mario","id":"85220"},{"orcid":"0000-0002-0133-0656","id":"1486","full_name":"Trsek, Henning","last_name":"Trsek","first_name":"Henning"}],"conference":{"name":"26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA )","location":"Vasteras, Sweden ","start_date":"2021-09-07","end_date":"2021-09-10"},"department":[{"_id":"DEP5023"}],"publisher":"IEEE","status":"public","publication":"2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)","publication_identifier":{"eisbn":["978-1-7281-2989-1 "],"isbn":["978-1-7281-2990-7"]},"date_created":"2024-03-01T14:30:42Z","type":"conference","user_id":"83781","date_updated":"2024-03-05T15:01:55Z","_id":"11157","doi":"10.1109/ETFA45728.2021.9613614","place":"Piscataway, NJ","language":[{"iso":"eng"}]},{"date_updated":"2023-03-15T13:49:56Z","publication_identifier":{"eissn":["2288-4300 "]},"publication":"Journal of Computational Design and Engineering","date_created":"2021-02-04T15:20:11Z","keyword":["human–technology interaction","human–computer interaction","crossdevice interaction","cyber-physical systems","assistance","smart factory","middleware","actor model","information system design","industry 4.0"],"language":[{"iso":"eng"}],"volume":8,"citation":{"ama":"Dhiman H, Röcker C. Middleware for providing activity-driven assistance in cyber-physical production systems. Journal of Computational Design and Engineering. 2021;8(1):428-451. doi:10.1093/jcde/qwaa088","ieee":"H. Dhiman and C. Röcker, “Middleware for providing activity-driven assistance in cyber-physical production systems,” Journal of Computational Design and Engineering, vol. 8, no. 1, pp. 428–451, 2021.","din1505-2-1":"Dhiman, Hitesh ; Röcker, Carsten: Middleware for providing activity-driven assistance in cyber-physical production systems. In: Journal of Computational Design and Engineering Bd. 8. Oxford, Oxford University Press (2021), Nr. 1, S. 428–451","chicago-de":"Dhiman, Hitesh und Carsten Röcker. 2021. Middleware for providing activity-driven assistance in cyber-physical production systems. Journal of Computational Design and Engineering 8, Nr. 1: 428–451. doi:10.1093/jcde/qwaa088, .","short":"H. Dhiman, C. Röcker, Journal of Computational Design and Engineering 8 (2021) 428–451.","ufg":"Dhiman, Hitesh/Röcker, Carsten (2021): Middleware for providing activity-driven assistance in cyber-physical production systems, in: Journal of Computational Design and Engineering 8 (1), S. 428–451.","bjps":"Dhiman H and Röcker C (2021) Middleware for Providing Activity-Driven Assistance in Cyber-Physical Production Systems. Journal of Computational Design and Engineering 8, 428–451.","havard":"H. Dhiman, C. Röcker, Middleware for providing activity-driven assistance in cyber-physical production systems, Journal of Computational Design and Engineering. 8 (2021) 428–451.","mla":"Dhiman, Hitesh, and Carsten Röcker. “Middleware for Providing Activity-Driven Assistance in Cyber-Physical Production Systems.” Journal of Computational Design and Engineering, vol. 8, no. 1, Oxford University Press, 2021, pp. 428–51, doi:10.1093/jcde/qwaa088.","van":"Dhiman H, Röcker C. Middleware for providing activity-driven assistance in cyber-physical production systems. Journal of Computational Design and Engineering. 2021;8(1):428–51.","chicago":"Dhiman, Hitesh, and Carsten Röcker. “Middleware for Providing Activity-Driven Assistance in Cyber-Physical Production Systems.” Journal of Computational Design and Engineering 8, no. 1 (2021): 428–51. https://doi.org/10.1093/jcde/qwaa088.","apa":"Dhiman, H., & Röcker, C. (2021). Middleware for providing activity-driven assistance in cyber-physical production systems. Journal of Computational Design and Engineering, 8(1), 428–451. https://doi.org/10.1093/jcde/qwaa088"},"title":"Middleware for providing activity-driven assistance in cyber-physical production systems","status":"public","page":"428-451","author":[{"id":"71767","first_name":"Hitesh","full_name":"Dhiman, Hitesh","last_name":"Dhiman"},{"first_name":"Carsten","last_name":"Röcker","id":"61525","full_name":"Röcker, Carsten"}],"year":2021,"intvolume":" 8","user_id":"15514","type":"journal_article","_id":"4897","doi":"10.1093/jcde/qwaa088","place":"Oxford","publication_status":"published","publisher":"Oxford University Press","abstract":[{"text":"Assistance is becoming increasingly relevant in carrying out industrial work in the context of cyber-physical production systems (CPPSs) and Industry 4.0. While assistance in a single task via a single interaction modality has been explored previously, crossdevice interaction could improve the quality of assistance, especially given the concurrent and distributed nature of work in CPPSs. In this paper, we present the theoretical foundations and implementation of MiWSICx (Middleware for Work Support in Industrial Contexts), a middleware that showcases how multiple interactive computing devices such as tablets, smartphones, augmented/virtual reality glasses, and wearables could be combined to provide crossdevice industrial assistance. Based on activity theory, MiWSICx models human work as activities combining multiple users, artifacts, and cyber-physical objects. MiWSICx is developed using the actor model for deployment on a variety of hardware alongside a CPPS to provide multiuser, crossdevice, multiactivity assistance.","lang":"eng"}],"issue":"1","department":[{"_id":"DEP5023"},{"_id":"DEP5027"}]},{"title":"Sicherer Austausch von Inhalten der Verwaltungsschale mit Distributed Ledger Technologie","citation":{"ama":"Bröring A, Belyaev A, Trsek H, Wisniewski L, Diedrich C. Sicherer Austausch von Inhalten der Verwaltungsschale mit Distributed Ledger Technologie. Berlin: VDI- Verlag; 2021.","ieee":"A. Bröring, A. Belyaev, H. Trsek, L. Wisniewski, and C. Diedrich, Sicherer Austausch von Inhalten der Verwaltungsschale mit Distributed Ledger Technologie. Berlin: VDI- Verlag, 2021.","chicago-de":"Bröring, Andre, Alexander Belyaev, Henning Trsek, Lukasz Wisniewski und Christian Diedrich. 2021. Sicherer Austausch von Inhalten der Verwaltungsschale mit Distributed Ledger Technologie. 22. VDI-Kongress AUTOMATION. Berlin: VDI- Verlag.","din1505-2-1":"Bröring, Andre ; Belyaev, Alexander ; Trsek, Henning ; Wisniewski, Lukasz ; Diedrich, Christian: Sicherer Austausch von Inhalten der Verwaltungsschale mit Distributed Ledger Technologie. Berlin : VDI- Verlag, 2021","short":"A. Bröring, A. Belyaev, H. Trsek, L. Wisniewski, C. Diedrich, Sicherer Austausch von Inhalten der Verwaltungsschale mit Distributed Ledger Technologie, VDI- Verlag, Berlin, 2021.","ufg":"Bröring, Andre et. al. (2021): Sicherer Austausch von Inhalten der Verwaltungsschale mit Distributed Ledger Technologie, Berlin.","bjps":"Bröring A et al. (2021) Sicherer Austausch von Inhalten der Verwaltungsschale mit Distributed Ledger Technologie. Berlin: VDI- Verlag.","havard":"A. Bröring, A. Belyaev, H. Trsek, L. Wisniewski, C. Diedrich, Sicherer Austausch von Inhalten der Verwaltungsschale mit Distributed Ledger Technologie, VDI- Verlag, Berlin, 2021.","mla":"Bröring, Andre, et al. “Sicherer Austausch von Inhalten der Verwaltungsschale mit Distributed Ledger Technologie.” 22. VDI-Kongress AUTOMATION, VDI- Verlag, 2021.","van":"Bröring A, Belyaev A, Trsek H, Wisniewski L, Diedrich C. Sicherer Austausch von Inhalten der Verwaltungsschale mit Distributed Ledger Technologie. 22. VDI-Kongress AUTOMATION. Berlin: VDI- Verlag; 2021.","chicago":"Bröring, Andre, Alexander Belyaev, Henning Trsek, Lukasz Wisniewski, and Christian Diedrich. Sicherer Austausch von Inhalten der Verwaltungsschale mit Distributed Ledger Technologie. 22. VDI-Kongress AUTOMATION. Berlin: VDI- Verlag, 2021.","apa":"Bröring, A., Belyaev, A., Trsek, H., Wisniewski, L., & Diedrich, C. (2021). Sicherer Austausch von Inhalten der Verwaltungsschale mit Distributed Ledger Technologie. 22. VDI-Kongress AUTOMATION. Berlin: VDI- Verlag."},"publication_status":"published","year":2021,"author":[{"id":"65130","first_name":"Andre","last_name":"Bröring","full_name":"Bröring, Andre"},{"last_name":"Belyaev","full_name":"Belyaev, Alexander","first_name":"Alexander"},{"first_name":"Henning","last_name":"Trsek","id":"1486","full_name":"Trsek, Henning"},{"full_name":"Wisniewski, Lukasz","id":"1710","first_name":"Lukasz","last_name":"Wisniewski"},{"full_name":"Diedrich, Christian","first_name":"Christian","last_name":"Diedrich"}],"department":[{"_id":"DEP5023"}],"conference":{"name":"22. VDI-Kongress AUTOMATION 2021","location":"digital","end_date":"2021-06-30","start_date":"2021-06-29"},"publisher":"VDI- Verlag","status":"public","publication":"22. VDI-Kongress AUTOMATION","type":"conference_editor_article","date_created":"2021-02-05T09:59:11Z","user_id":"45673","date_updated":"2023-03-15T13:49:56Z","_id":"4898","place":"Berlin","language":[{"iso":"ger"}]},{"citation":{"short":"S. Scanzio, L. Wisniewski, P. Gaj, Journal Computers in Industry 125 (2021).","din1505-2-1":"Scanzio, Stefano ; Wisniewski, Lukasz ; Gaj, Piotr: Heterogeneous and Dependable Networks in Industry - a Survey. In: Journal Computers in Industry Bd. 125, Elsevier (2021), Nr. Febr. 2021","chicago-de":"Scanzio, Stefano, Lukasz Wisniewski und Piotr Gaj. 2021. Heterogeneous and Dependable Networks in Industry - a Survey. Journal Computers in Industry 125, Nr. Febr. 2021. doi:10.1016/j.compind.2020.103388, .","van":"Scanzio S, Wisniewski L, Gaj P. Heterogeneous and Dependable Networks in Industry - a Survey. Journal Computers in Industry. 2021;125(Febr. 2021).","ufg":"Scanzio, Stefano et. al. (2021): Heterogeneous and Dependable Networks in Industry - a Survey, in: Journal Computers in Industry 125 (Febr. 2021).","bjps":"Scanzio S, Wisniewski L and Gaj P (2021) Heterogeneous and Dependable Networks in Industry - a Survey. Journal Computers in Industry 125.","mla":"Scanzio, Stefano, et al. “Heterogeneous and Dependable Networks in Industry - a Survey.” Journal Computers in Industry, vol. 125, no. Febr. 2021, 103388, Elsevier, 2021, doi:10.1016/j.compind.2020.103388.","havard":"S. Scanzio, L. Wisniewski, P. Gaj, Heterogeneous and Dependable Networks in Industry - a Survey, Journal Computers in Industry. 125 (2021).","apa":"Scanzio, S., Wisniewski, L., & Gaj, P. (2021). Heterogeneous and Dependable Networks in Industry - a Survey. Journal Computers in Industry, 125(Febr. 2021). https://doi.org/10.1016/j.compind.2020.103388","chicago":"Scanzio, Stefano, Lukasz Wisniewski, and Piotr Gaj. “Heterogeneous and Dependable Networks in Industry - a Survey.” Journal Computers in Industry 125, no. Febr. 2021 (2021). https://doi.org/10.1016/j.compind.2020.103388.","ama":"Scanzio S, Wisniewski L, Gaj P. Heterogeneous and Dependable Networks in Industry - a Survey. Journal Computers in Industry. 2021;125(Febr. 2021). doi:10.1016/j.compind.2020.103388","ieee":"S. Scanzio, L. Wisniewski, and P. Gaj, “Heterogeneous and Dependable Networks in Industry - a Survey,” Journal Computers in Industry, vol. 125, no. Febr. 2021, 2021."},"volume":125,"title":"Heterogeneous and Dependable Networks in Industry - a Survey","status":"public","year":2021,"author":[{"last_name":"Scanzio","full_name":"Scanzio, Stefano","first_name":"Stefano"},{"full_name":"Wisniewski, Lukasz","first_name":"Lukasz","last_name":"Wisniewski","id":"1710"},{"last_name":"Gaj","full_name":"Gaj, Piotr","first_name":"Piotr"}],"date_updated":"2023-03-15T13:49:56Z","publication":"Journal Computers in Industry","publication_identifier":{"eissn":["0166-3615"]},"date_created":"2021-02-05T10:11:22Z","keyword":["Industrial networks","Heterogeneity","Dependability","Interoperability","Real-time","Reliability","Ethernet","Wireless","Wi-Fi","WSAN","SDN","TSN","5G","CPS","IIoT","I4.0"],"language":[{"iso":"eng"}],"publication_status":"published","publisher":"Elsevier","department":[{"_id":"DEP5023"}],"issue":"Febr. 2021","abstract":[{"lang":"eng","text":"The real and effective ground of all new concepts dedicated to the current advanced factories, as well as to the future digital ones, is close cooperativity of scattered applications in highly heterogeneous systems. Communication is the key enabling component, and all new approaches are inspired in practice to the demanding characteristics of industrial networks. These kinds of computer networks, together with new technologies derived from distant application fields, are the main technological means to accelerate the fast evolution of modern factory systems. Due to various communication requirements coming from the plurality of structures, components and application contexts, communication subsystems must be increasingly heterogeneous. Let us say clearly: this evolution cannot be stopped at this stage, no special universal solution is possible, and thinking about monogamous networking is a kind of dreamland. This paper is an analysis of the state of the art in the matter of heterogeneous networking in industry. It deeply investigates both wired and wireless technologies from the point of view of technological aspects and relevant key performance indicators, such as those related to dependability, and it contains a prospective estimation of future trends."}],"user_id":"15514","intvolume":" 125","type":"journal_article","_id":"4899","doi":"10.1016/j.compind.2020.103388","article_number":"103388"},{"_id":"5027","language":[{"iso":"eng"}],"place":"Netherlands","editor":[{"full_name":"Pottgiesser, Uta","id":"27166","first_name":"Uta","last_name":"Pottgiesser","orcid":"0000-0002-8594-3168"},{"last_name":"Fatori","first_name":"Sandra","full_name":"Fatori, Sandra"},{"last_name":"Hein","full_name":"Hein, Carola M.","first_name":"Carola M."},{"full_name":"de Maaker, Erik","first_name":"Erik","last_name":"de Maaker"},{"first_name":"Ana","full_name":"Pereira Roders, Ana","last_name":"Pereira Roders"}],"date_updated":"2023-03-15T13:49:57Z","user_id":"45673","date_created":"2021-02-22T14:23:57Z","type":"conference_editor","publication_identifier":{"isbn":["978-94-6366-356-4"]},"quality_controlled":"1","publisher":"TU Delft Open","status":"public","abstract":[{"text":"Heritage—natural and cultural, material and immaterial—plays a key role in the development of sustainable cities and communities. Goal 11, target 4, of the Sustainable Development Goals (SDGs) emphasizes the relation between heritage and sustainability. The International LDE Heritage conference on Heritage and Sustainable Development Goals, which took place from 26 to 28 November 2019 at TU Delft in the Netherlands, examined the theories, methodologies, and practices of heritage and SDGs. It asked: How is heritage produced and defined? By whom and in what contexts? What are the conceptions of sustainability, and in what ways are these situational and contextual? How can theoretical findings on heritage and SDGs engage with heritage practice?","lang":"eng"}],"department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"conference":{"end_date":"2019-11-28","start_date":"2019-11-26","name":"LDE Heritage International Conference on Heritage and the Sustainable Development Goal","location":"Delft"},"year":2021,"publication_status":"published","citation":{"ieee":"U. Pottgiesser, S. Fatori, C. M. Hein, E. de Maaker, and A. Pereira Roders, Eds., LDE Heritage Conference on Heritage and the Sustainable Development Goals: Proceedings. Netherlands: TU Delft Open, 2021.","ama":"Pottgiesser U, Fatori S, Hein CM, de Maaker E, Pereira Roders A, eds. LDE Heritage Conference on Heritage and the Sustainable Development Goals: Proceedings. Netherlands: TU Delft Open; 2021.","apa":"Pottgiesser, U., Fatori, S., Hein, C. M., de Maaker, E., & Pereira Roders, A. (Eds.). (2021). LDE Heritage Conference on Heritage and the Sustainable Development Goals: Proceedings. Presented at the LDE Heritage International Conference on Heritage and the Sustainable Development Goal, Netherlands: TU Delft Open.","chicago":"Pottgiesser, Uta, Sandra Fatori, Carola M. Hein, Erik de Maaker, and Ana Pereira Roders, eds. LDE Heritage Conference on Heritage and the Sustainable Development Goals: Proceedings. Netherlands: TU Delft Open, 2021.","van":"Pottgiesser U, Fatori S, Hein CM, de Maaker E, Pereira Roders A, editors. LDE Heritage Conference on Heritage and the Sustainable Development Goals: Proceedings. Netherlands: TU Delft Open; 2021.","mla":"Pottgiesser, Uta, et al., editors. LDE Heritage Conference on Heritage and the Sustainable Development Goals: Proceedings. TU Delft Open, 2021.","bjps":"Pottgiesser U et al. (eds) (2021) LDE Heritage Conference on Heritage and the Sustainable Development Goals: Proceedings. Netherlands: TU Delft Open.","havard":"U. Pottgiesser, S. Fatori, C.M. Hein, E. de Maaker, A. Pereira Roders, eds., LDE Heritage Conference on Heritage and the Sustainable Development Goals: Proceedings, TU Delft Open, Netherlands, 2021.","ufg":"Pottgiesser, Uta et. al. (Hgg.) (2021): LDE Heritage Conference on Heritage and the Sustainable Development Goals: Proceedings, Netherlands.","short":"U. Pottgiesser, S. Fatori, C.M. Hein, E. de Maaker, A. Pereira Roders, eds., LDE Heritage Conference on Heritage and the Sustainable Development Goals: Proceedings, TU Delft Open, Netherlands, 2021.","chicago-de":"Pottgiesser, Uta, Sandra Fatori, Carola M. Hein, Erik de Maaker und Ana Pereira Roders, Hrsg. 2021. LDE Heritage Conference on Heritage and the Sustainable Development Goals: Proceedings. Netherlands: TU Delft Open.","din1505-2-1":"Pottgiesser, U. ; Fatori, S. ; Hein, C. M. ; de Maaker, E. ; Pereira Roders, A. (Hrsg.): LDE Heritage Conference on Heritage and the Sustainable Development Goals: Proceedings. Netherlands : TU Delft Open, 2021"},"title":"LDE Heritage Conference on Heritage and the Sustainable Development Goals: Proceedings"},{"publication":"LDE Heritage Conference on Heritage and the Sustainable Development Goals","date_created":"2021-03-02T08:17:03Z","type":"book_chapter","editor":[{"orcid":"0000-0002-8594-3168","last_name":"Pottgiesser","id":"27166","full_name":"Pottgiesser, Uta","first_name":"Uta"},{"first_name":"Sandra","last_name":"Fatoric","full_name":"Fatoric, Sandra"},{"last_name":"Hein","first_name":"Carola","full_name":"Hein, Carola"},{"last_name":"de Maaker","first_name":"Erik","full_name":"de Maaker, Erik"},{"last_name":"Roders, Ana ","first_name":"Pereira","full_name":"Roders, Ana , Pereira"}],"user_id":"45673","date_updated":"2023-03-15T13:49:57Z","_id":"5100","place":"Netherlands","language":[{"iso":"eng"}],"title":"Roundtable VII: Time and Unlisted Heritage","citation":{"ieee":"F. Arfa and U. Pottgiesser, “Roundtable VII: Time and Unlisted Heritage,” in LDE Heritage Conference on Heritage and the Sustainable Development Goals, U. Pottgiesser, S. Fatoric, C. Hein, E. de Maaker, and P. Roders, Ana , Eds. Netherlands: TU Delft Open, 2021, pp. 537–539.","ama":"Arfa F, Pottgiesser U. Roundtable VII: Time and Unlisted Heritage. In: Pottgiesser U, Fatoric S, Hein C, de Maaker E, Roders, Ana P, eds. LDE Heritage Conference on Heritage and the Sustainable Development Goals. Netherlands: TU Delft Open; 2021:537-539.","din1505-2-1":"Arfa, Fatemeh ; Pottgiesser, Uta: Roundtable VII: Time and Unlisted Heritage. In: Pottgiesser, U. ; Fatoric, S. ; Hein, C. ; de Maaker, E. ; Roders, Ana , P. (Hrsg.): LDE Heritage Conference on Heritage and the Sustainable Development Goals. Netherlands : TU Delft Open, 2021, S. 537–539","chicago-de":"Arfa, Fatemeh und Uta Pottgiesser. 2021. Roundtable VII: Time and Unlisted Heritage. In: LDE Heritage Conference on Heritage and the Sustainable Development Goals, hg. von Uta Pottgiesser, Sandra Fatoric, Carola Hein, Erik de Maaker, und Pereira Roders, Ana , 537–539. Netherlands: TU Delft Open.","short":"F. Arfa, U. Pottgiesser, in: U. Pottgiesser, S. Fatoric, C. Hein, E. de Maaker, P. Roders, Ana (Eds.), LDE Heritage Conference on Heritage and the Sustainable Development Goals, TU Delft Open, Netherlands, 2021, pp. 537–539.","chicago":"Arfa, Fatemeh, and Uta Pottgiesser. “Roundtable VII: Time and Unlisted Heritage.” In LDE Heritage Conference on Heritage and the Sustainable Development Goals, edited by Uta Pottgiesser, Sandra Fatoric, Carola Hein, Erik de Maaker, and Pereira Roders, Ana , 537–39. Netherlands: TU Delft Open, 2021.","apa":"Arfa, F., & Pottgiesser, U. (2021). Roundtable VII: Time and Unlisted Heritage. In U. Pottgiesser, S. Fatoric, C. Hein, E. de Maaker, & P. Roders, Ana (Eds.), LDE Heritage Conference on Heritage and the Sustainable Development Goals (pp. 537–539). Netherlands: TU Delft Open.","ufg":"Arfa, Fatemeh/Pottgiesser, Uta (2021): Roundtable VII: Time and Unlisted Heritage, in: Uta Pottgiesser et. al. (Hgg.): LDE Heritage Conference on Heritage and the Sustainable Development Goals, Netherlands, S. 537–539.","bjps":"Arfa F and Pottgiesser U (2021) Roundtable VII: Time and Unlisted Heritage. In Pottgiesser U et al. (eds), LDE Heritage Conference on Heritage and the Sustainable Development Goals. Netherlands: TU Delft Open, pp. 537–539.","mla":"Arfa, Fatemeh, and Uta Pottgiesser. “Roundtable VII: Time and Unlisted Heritage.” LDE Heritage Conference on Heritage and the Sustainable Development Goals, edited by Uta Pottgiesser et al., TU Delft Open, 2021, pp. 537–39.","havard":"F. Arfa, U. Pottgiesser, Roundtable VII: Time and Unlisted Heritage, in: U. Pottgiesser, S. Fatoric, C. Hein, E. de Maaker, P. Roders, Ana (Eds.), LDE Heritage Conference on Heritage and the Sustainable Development Goals, TU Delft Open, Netherlands, 2021: pp. 537–539.","van":"Arfa F, Pottgiesser U. Roundtable VII: Time and Unlisted Heritage. In: Pottgiesser U, Fatoric S, Hein C, de Maaker E, Roders, Ana P, editors. LDE Heritage Conference on Heritage and the Sustainable Development Goals. Netherlands: TU Delft Open; 2021. p. 537–9."},"publication_status":"published","author":[{"full_name":"Arfa, Fatemeh","last_name":"Arfa","first_name":"Fatemeh"},{"orcid":"0000-0002-8594-3168","last_name":"Pottgiesser","first_name":"Uta","id":"27166","full_name":"Pottgiesser, Uta"}],"year":2021,"department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"publisher":"TU Delft Open","status":"public","page":"537-539"},{"title":"Sustainable Development of 1970-2014 High-Rise Residential Architecture from: Dubai Case Study on Modern Heritage","citation":{"short":"A.A. Raed, U. Pottgiesser, W.J. Quist, in: U. Pottgiesser, S. Fatoric, E. de Maaker, A. Pereira Roders (Eds.), LDE Heritage Conference on Heritage and the Sustainable Development Goals, TU Delft Open, Netherlands, 2021, pp. 268–278.","chicago-de":"Raed, Abeer Abu, Uta Pottgiesser und Wido J. Quist. 2021. Sustainable Development of 1970-2014 High-Rise Residential Architecture from: Dubai Case Study on Modern Heritage. In: LDE Heritage Conference on Heritage and the Sustainable Development Goals, hg. von Uta Pottgiesser, Sandra Fatoric, Erik de Maaker, und Ana Pereira Roders, 268–278. Netherlands: TU Delft Open.","din1505-2-1":"Raed, Abeer Abu ; Pottgiesser, Uta ; Quist, Wido J.: Sustainable Development of 1970-2014 High-Rise Residential Architecture from: Dubai Case Study on Modern Heritage. In: Pottgiesser, U. ; Fatoric, S. ; de Maaker, E. ; Pereira Roders, A. (Hrsg.): LDE Heritage Conference on Heritage and the Sustainable Development Goals. Netherlands : TU Delft Open, 2021, S. 268–278","apa":"Raed, A. A., Pottgiesser, U., & Quist, W. J. (2021). Sustainable Development of 1970-2014 High-Rise Residential Architecture from: Dubai Case Study on Modern Heritage. In U. Pottgiesser, S. Fatoric, E. de Maaker, & A. Pereira Roders (Eds.), LDE Heritage Conference on Heritage and the Sustainable Development Goals (pp. 268–278). Netherlands: TU Delft Open.","chicago":"Raed, Abeer Abu, Uta Pottgiesser, and Wido J. Quist. “Sustainable Development of 1970-2014 High-Rise Residential Architecture from: Dubai Case Study on Modern Heritage.” In LDE Heritage Conference on Heritage and the Sustainable Development Goals, edited by Uta Pottgiesser, Sandra Fatoric, Erik de Maaker, and Ana Pereira Roders, 268–78. Netherlands: TU Delft Open, 2021.","van":"Raed AA, Pottgiesser U, Quist WJ. Sustainable Development of 1970-2014 High-Rise Residential Architecture from: Dubai Case Study on Modern Heritage. In: Pottgiesser U, Fatoric S, de Maaker E, Pereira Roders A, editors. LDE Heritage Conference on Heritage and the Sustainable Development Goals. Netherlands: TU Delft Open; 2021. p. 268–78.","mla":"Raed, Abeer Abu, et al. “Sustainable Development of 1970-2014 High-Rise Residential Architecture from: Dubai Case Study on Modern Heritage.” LDE Heritage Conference on Heritage and the Sustainable Development Goals, edited by Uta Pottgiesser et al., TU Delft Open, 2021, pp. 268–78.","bjps":"Raed AA, Pottgiesser U and Quist WJ (2021) Sustainable Development of 1970-2014 High-Rise Residential Architecture from: Dubai Case Study on Modern Heritage. In Pottgiesser U et al. (eds), LDE Heritage Conference on Heritage and the Sustainable Development Goals. Netherlands: TU Delft Open, pp. 268–278.","havard":"A.A. Raed, U. Pottgiesser, W.J. Quist, Sustainable Development of 1970-2014 High-Rise Residential Architecture from: Dubai Case Study on Modern Heritage, in: U. Pottgiesser, S. Fatoric, E. de Maaker, A. Pereira Roders (Eds.), LDE Heritage Conference on Heritage and the Sustainable Development Goals, TU Delft Open, Netherlands, 2021: pp. 268–278.","ufg":"Raed, Abeer Abu et. al. (2021): Sustainable Development of 1970-2014 High-Rise Residential Architecture from: Dubai Case Study on Modern Heritage, in: Uta Pottgiesser et. al. (Hgg.): LDE Heritage Conference on Heritage and the Sustainable Development Goals, Netherlands, S. 268–278.","ieee":"A. A. Raed, U. Pottgiesser, and W. J. Quist, “Sustainable Development of 1970-2014 High-Rise Residential Architecture from: Dubai Case Study on Modern Heritage,” in LDE Heritage Conference on Heritage and the Sustainable Development Goals, 2021, pp. 268–278.","ama":"Raed AA, Pottgiesser U, Quist WJ. Sustainable Development of 1970-2014 High-Rise Residential Architecture from: Dubai Case Study on Modern Heritage. In: Pottgiesser U, Fatoric S, de Maaker E, Pereira Roders A, eds. LDE Heritage Conference on Heritage and the Sustainable Development Goals. Netherlands: TU Delft Open; 2021:268-278."},"publication_status":"published","abstract":[{"text":"The Government of Dubai implemented Green Building Regulations & Specifications & Specifications (GBRS). In March 2014. Dubai has more than 1000 high-rise buildings in which more than 2 million residents are accommodated. However, 62% of the existing residential high-rise buildings dating from 1970-2014 do not meet the requirements of the new GBRS. The paper suggests a sustainability plan framework for the modern heritage buildings in Dubai that satisfies the new building regulations. This will require the development of a new set of tools to adequately protect and keep the identity and heritage of the existing buildings instead of replacing them with new ones. In this context, several case studies are presented, analyzed and discussed to present the potential and the challenges of keeping these buildings.Many of the existing buildings built in the City of Dubai from 1970-2014 are part of the memory of the place and contribute to the story of Dubai development in the recent past. This research aims at protecting and documenting an important phase of the history of the urban development in the City of Dubai, highlighting the time period in which the initial principles that govern and guide the development of the city were developed. As part of Dubai modern heritage, the buildings under study have had a major impact on shaping the urban environment and crystallizing the architectural character of Dubai development in the 1970s and 1980s. Besides that, the headlong modernization of Dubai will eliminate all evidence of the city evolution. As a result, retrofitting of existing buildings should not only improve energy efficiency and performance but also keep the identity and heritage of the City of Dubai instead of replacing buildings with new ones.","lang":"eng"}],"year":2021,"author":[{"last_name":"Raed","full_name":"Raed, Abeer Abu","first_name":"Abeer Abu"},{"orcid":"0000-0002-8594-3168","id":"27166","last_name":"Pottgiesser","first_name":"Uta","full_name":"Pottgiesser, Uta"},{"last_name":"Quist","full_name":"Quist, Wido J.","first_name":"Wido J."}],"department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"publisher":"TU Delft Open","quality_controlled":"1","status":"public","page":"268-278","publication":"LDE Heritage Conference on Heritage and the Sustainable Development Goals","date_created":"2021-03-02T08:19:01Z","type":"conference","editor":[{"first_name":"Uta","full_name":"Pottgiesser, Uta","last_name":"Pottgiesser"},{"full_name":"Fatoric, Sandra","first_name":"Sandra","last_name":"Fatoric"},{"last_name":"de Maaker","first_name":"Erik","full_name":"de Maaker, Erik"},{"last_name":"Pereira Roders","first_name":"Ana","full_name":"Pereira Roders, Ana"}],"user_id":"45673","date_updated":"2023-03-15T13:49:57Z","_id":"5101","place":"Netherlands","keyword":["Modern Heritage","Sustainability","High-rise Buildings","Dubai","Green Building"],"language":[{"iso":"eng"}]},{"citation":{"short":"L. Katsch, F.-J. Methner, J. Schneider, International Journal of Food Engineering 17 (2021) 703–713.","chicago-de":"Katsch, Linda, Frank-Jürgen Methner und Jan Schneider. 2021. Kinetic studies of 5-(Hydroxymethyl)-furfural formation and change of the absorption at 420 nm in fruit juices for the improvement of pasteurization plants . International Journal of Food Engineering 17, Nr. 9: 703–713. doi:https://doi.org/10.1515/ijfe-2020-0324, .","din1505-2-1":"Katsch, Linda ; Methner, Frank-Jürgen ; Schneider, Jan: Kinetic studies of 5-(Hydroxymethyl)-furfural formation and change of the absorption at 420 nm in fruit juices for the improvement of pasteurization plants . In: International Journal of Food Engineering Bd. 17. Berlin ; Boston, Mass. , Walter de Gruyter GmbH (2021), Nr. 9, S. 703–713","van":"Katsch L, Methner FJ, Schneider J. Kinetic studies of 5-(Hydroxymethyl)-furfural formation and change of the absorption at 420 nm in fruit juices for the improvement of pasteurization plants . International Journal of Food Engineering . 2021;17(9):703–13.","ufg":"Katsch, Linda/Methner, Frank-Jürgen/Schneider, Jan: Kinetic studies of 5-(Hydroxymethyl)-furfural formation and change of the absorption at 420 nm in fruit juices for the improvement of pasteurization plants , in: International Journal of Food Engineering 17 (2021), H. 9, S. 703–713.","bjps":"Katsch L, Methner F-J and Schneider J (2021) Kinetic Studies of 5-(Hydroxymethyl)-Furfural Formation and Change of the Absorption at 420 Nm in Fruit Juices for the Improvement of Pasteurization Plants . International Journal of Food Engineering 17, 703–713.","havard":"L. Katsch, F.-J. Methner, J. Schneider, Kinetic studies of 5-(Hydroxymethyl)-furfural formation and change of the absorption at 420 nm in fruit juices for the improvement of pasteurization plants , International Journal of Food Engineering . 17 (2021) 703–713.","mla":"Katsch, Linda, et al. “Kinetic Studies of 5-(Hydroxymethyl)-Furfural Formation and Change of the Absorption at 420 Nm in Fruit Juices for the Improvement of Pasteurization Plants .” International Journal of Food Engineering , vol. 17, no. 9, 2021, pp. 703–13, https://doi.org/10.1515/ijfe-2020-0324.","apa":"Katsch, L., Methner, F.-J., & Schneider, J. (2021). Kinetic studies of 5-(Hydroxymethyl)-furfural formation and change of the absorption at 420 nm in fruit juices for the improvement of pasteurization plants . International Journal of Food Engineering , 17(9), 703–713. https://doi.org/10.1515/ijfe-2020-0324","chicago":"Katsch, Linda, Frank-Jürgen Methner, and Jan Schneider. “Kinetic Studies of 5-(Hydroxymethyl)-Furfural Formation and Change of the Absorption at 420 Nm in Fruit Juices for the Improvement of Pasteurization Plants .” International Journal of Food Engineering 17, no. 9 (2021): 703–13. https://doi.org/10.1515/ijfe-2020-0324.","ama":"Katsch L, Methner FJ, Schneider J. Kinetic studies of 5-(Hydroxymethyl)-furfural formation and change of the absorption at 420 nm in fruit juices for the improvement of pasteurization plants . International Journal of Food Engineering . 2021;17(9):703-713. doi:https://doi.org/10.1515/ijfe-2020-0324","ieee":"L. Katsch, F.-J. Methner, and J. Schneider, “Kinetic studies of 5-(Hydroxymethyl)-furfural formation and change of the absorption at 420 nm in fruit juices for the improvement of pasteurization plants ,” International Journal of Food Engineering , vol. 17, no. 9, pp. 703–713, 2021, doi: https://doi.org/10.1515/ijfe-2020-0324."},"volume":17,"title":"Kinetic studies of 5-(Hydroxymethyl)-furfural formation and change of the absorption at 420 nm in fruit juices for the improvement of pasteurization plants ","page":"703-713","status":"public","external_id":{"isi":["000699893400004"]},"year":"2021","author":[{"last_name":"Katsch","first_name":"Linda","full_name":"Katsch, Linda","id":"71614","orcid":"0000-0001-6628-3929 "},{"full_name":"Methner, Frank-Jürgen","last_name":"Methner","first_name":"Frank-Jürgen"},{"orcid":"0000-0001-6401-8873","last_name":"Schneider","full_name":"Schneider, Jan","id":"13209","first_name":"Jan"}],"date_updated":"2025-06-26T13:31:14Z","date_created":"2021-04-08T05:51:47Z","publication":"International Journal of Food Engineering ","publication_identifier":{"issn":["2194-5764"],"eissn":["1556-3758"]},"language":[{"iso":"eng"}],"keyword":["absorption at 420 nm","HMF","kinetic figures","line of equal effect","pasteurization."],"publication_status":"published","article_type":"original","isi":"1","quality_controlled":"1","publisher":"Walter de Gruyter GmbH","issue":"9","abstract":[{"lang":"eng","text":"Preservation of juices is essential to obtain microbial safe products. There are various established methods as pasteurization. Heretofore, only the kinetic figures of microbial inactivation were considered but not those of reaction impairing the chemical quality. For a gentler processing, knowledge of the kinetics of relevant chemical conversion reactions is necessary. 5-(Hydroxymethyl)-furfural (HMF) formation and the color change of juices are important attributes. The non-isothermal Rhim method was used to determine the activation energy and pre-exponential factor for HMF formation in different juices and an isothermal method for the reaction order. Values for the activation energy from 133 to 303 kJ/mol were obtained with a zeroth reaction order. A correlation between HMF and the color change could be found. Based on the kinetic figures, lines with equal effects for the chemical changes and for the lethal effect on microorganisms were calculated. Time-temperature settings for the gentlest treatment could be found."}],"department":[{"_id":"DEP4018"},{"_id":"DEP1308"},{"_id":"DEP4028"}],"intvolume":" 17","user_id":"83781","type":"scientific_journal_article","doi":"https://doi.org/10.1515/ijfe-2020-0324","_id":"5423","place":"Berlin ; Boston, Mass. "},{"status":"public","year":"2021","citation":{"ama":"Pottgiesser U, Dragutinovic A, Loddo M, OWL University of Applied Sciences, Detmold School of Architecture and Interior Architecture, eds. MoMove Modern Movement and Infrastructure. Technische Hochschule Ostwestfalen-Lippe; 2021. doi:10.25644/3m9j-0f94","ieee":"U. Pottgiesser, A. Dragutinovic, M. Loddo, OWL University of Applied Sciences, and Detmold School of Architecture and Interior Architecture, Eds., MoMove Modern Movement and Infrastructure. Technische Hochschule Ostwestfalen-Lippe, 2021. doi: 10.25644/3m9j-0f94.","havard":"U. Pottgiesser, A. Dragutinovic, M. Loddo, OWL University of Applied Sciences, Detmold School of Architecture and Interior Architecture, eds., MoMove Modern Movement and Infrastructure, Technische Hochschule Ostwestfalen-Lippe, 2021.","bjps":"Pottgiesser U et al. (eds) (2021) MoMove Modern Movement and Infrastructure. Technische Hochschule Ostwestfalen-Lippe.","mla":"Pottgiesser, Uta, et al., editors. MoMove Modern Movement and Infrastructure. Technische Hochschule Ostwestfalen-Lippe, 2021, https://doi.org/10.25644/3m9j-0f94.","ufg":"Pottgiesser, Uta u. a.: MoMove Modern Movement and Infrastructure, o. O. 2021.","van":"Pottgiesser U, Dragutinovic A, Loddo M, OWL University of Applied Sciences, Detmold School of Architecture and Interior Architecture, editors. MoMove Modern Movement and Infrastructure. Technische Hochschule Ostwestfalen-Lippe; 2021.","chicago":"Pottgiesser, Uta, Anica Dragutinovic, Marzia Loddo, OWL University of Applied Sciences, and Detmold School of Architecture and Interior Architecture, eds. MoMove Modern Movement and Infrastructure. Technische Hochschule Ostwestfalen-Lippe, 2021. https://doi.org/10.25644/3m9j-0f94.","apa":"Pottgiesser, U., Dragutinovic, A., Loddo, M., OWL University of Applied Sciences, & Detmold School of Architecture and Interior Architecture (Eds.). (2021). MoMove Modern Movement and Infrastructure. Technische Hochschule Ostwestfalen-Lippe. https://doi.org/10.25644/3m9j-0f94","chicago-de":"Pottgiesser, Uta, Anica Dragutinovic, Marzia Loddo, OWL University of Applied Sciences, und Detmold School of Architecture and Interior Architecture, Hrsg. 2021. MoMove Modern Movement and Infrastructure. Technische Hochschule Ostwestfalen-Lippe. doi:10.25644/3m9j-0f94, .","din1505-2-1":"Pottgiesser, U. ; Dragutinovic, A. ; Loddo, M. ; OWL University of Applied Sciences ; Detmold School of Architecture and Interior Architecture (Hrsg.): MoMove Modern Movement and Infrastructure : Technische Hochschule Ostwestfalen-Lippe, 2021","short":"U. Pottgiesser, A. Dragutinovic, M. Loddo, OWL University of Applied Sciences, Detmold School of Architecture and Interior Architecture, eds., MoMove Modern Movement and Infrastructure, Technische Hochschule Ostwestfalen-Lippe, 2021."},"title":"MoMove Modern Movement and Infrastructure","language":[{"iso":"eng"}],"oa":"1","date_updated":"2025-01-21T14:47:59Z","corporate_editor":["OWL University of Applied Sciences","Detmold School of Architecture and Interior Architecture"],"file_date_updated":"2021-04-09T11:03:47Z","editor":[{"orcid":"0000-0002-8594-3168","full_name":"Pottgiesser, Uta","first_name":"Uta","last_name":"Pottgiesser","id":"27166"},{"orcid":"0000-0002-6962-5223","full_name":"Dragutinovic, Anica","first_name":"Anica","id":"68875","last_name":"Dragutinovic"},{"first_name":"Marzia","last_name":"Loddo","full_name":"Loddo, Marzia"}],"publication_identifier":{"isbn":["978-3-939349-35-8"]},"date_created":"2021-04-09T11:10:13Z","publisher":"Technische Hochschule Ostwestfalen-Lippe","ddc":["720"],"department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"conference":{"end_date":"2021-02-26","start_date":"2021-02-26","location":"Dessau, Bauhaus (online)","name":"18th Docomomo Germany Conference"},"abstract":[{"text":"Preface: Since its foundation in 1990, Docomomo International has been dedicated to the documentation and conservation of buildings, sites and neighborhoods of the Modern Movement. It has devoted thirty years to study and protect the architectural heritage of the Modern Movement through academic and professional practise, case-studies and bestpractises, and the dissemination of knowledge. Facing the rapid digital developments and globalisation, Docomomo fostered its role as an international platform by offering new services, by making the knowledge and information available online, and by creating the new Docomomo virtual exhibition - MoMove. This was created by Docomomo International, Lisbon Headquarters, in 2015.\r\nSince 2014, the Detmold School of Architecture and Interior Architecture is an institutional member of Docomomo Germany and Docomomo International. It seeks to contribute to this mission with different contributions. As a co-organizer of the Docomomo Germany Conferences since 2019, the Detmold School was able to connect research and educational projects to the events, often exploring novel forms of ideation, documentation, design and dissemination. All this was conceived to fully exploit the creative and newly gained digital potentials, for the reuse and safeguard of the recent built heritage.\r\nThis year’s contribution aimed to create new contents for the MoMove produced by students of the master’s programs of Integrated Architectural Design (MIAD) and Integrated Design (MID). The goal has been to further develop MoMove into a strong dissemination and knowledge exchange platform. Being part of the first digital Docomomo conference,\r\nthese exhibits showcase and apply current digital visualization, and communication technologies. The exhibition, also, demonstrates the students’ reflections and concerns towards the future design of the built environment, inspired by the lessons learnt from Modern Movement. This small publication collects the students’ exhibits and puts them in the current context of open science and scientific communication. We hope to inspire you as a reader and visitor.","lang":"eng"}],"publication_status":"published","file":[{"success":1,"access_level":"open_access","date_updated":"2021-04-09T11:03:47Z","creator":"hka-zn8","relation":"main_file","date_created":"2021-04-09T11:03:47Z","file_name":"090421_MIAD-MID_C5ConferenceandCommunication.pdf","content_type":"application/pdf","file_size":29862024,"file_id":"5492"}],"_id":"5491","doi":"10.25644/3m9j-0f94","has_accepted_license":"1","user_id":"83781","type":"conference_editor"},{"publication":"Brauwelt","publication_identifier":{"issn":["0724-696X"],"eissn":["1439-5177"]},"date_created":"2021-04-13T12:03:12Z","type":"industry_journal_article","user_id":"83781","date_updated":"2025-02-10T07:07:05Z","place":"Nürnberg","language":[{"iso":"eng"}],"_id":"5504","title":"Potential für eine schonendere Pasteurisation","citation":{"ama":"Katsch L, Schneider J. Potential für eine schonendere Pasteurisation. Brauwelt. 2021;(14):340-343.","ieee":"L. Katsch and J. Schneider, “Potential für eine schonendere Pasteurisation,” Brauwelt, no. 14, pp. 340–343, 2021.","din1505-2-1":"Katsch, Linda ; Schneider, Jan: Potential für eine schonendere Pasteurisation. In: Brauwelt. Nürnberg, Fachverlag Hans Carl GmbH (2021), Nr. 14, S. 340–343","chicago-de":"Katsch, Linda und Jan Schneider. 2021. Potential für eine schonendere Pasteurisation. Brauwelt, Nr. 14: 340–343.","short":"L. Katsch, J. Schneider, Brauwelt (2021) 340–343.","ufg":"Katsch, Linda/Schneider, Jan: Potential für eine schonendere Pasteurisation, in: Brauwelt (2021), H. 14, S. 340–343.","mla":"Katsch, Linda, and Jan Schneider. “Potential Für Eine Schonendere Pasteurisation.” Brauwelt, no. 14, 2021, pp. 340–43.","bjps":"Katsch L and Schneider J (2021) Potential Für Eine Schonendere Pasteurisation. Brauwelt 340–343.","havard":"L. Katsch, J. Schneider, Potential für eine schonendere Pasteurisation, Brauwelt. (2021) 340–343.","van":"Katsch L, Schneider J. Potential für eine schonendere Pasteurisation. Brauwelt. 2021;(14):340–3.","chicago":"Katsch, Linda, and Jan Schneider. “Potential Für Eine Schonendere Pasteurisation.” Brauwelt, no. 14 (2021): 340–43.","apa":"Katsch, L., & Schneider, J. (2021). Potential für eine schonendere Pasteurisation. Brauwelt, 14, 340–343."},"publication_status":"published","main_file_link":[{"url":"https://www.wiso-net.de/toc_list/BW/2021/BW__%3A2021%3A14/Heft%2B14%2B%252F%2B2021/BW#"}],"author":[{"orcid":"0000-0001-6628-3929 ","last_name":"Katsch","id":"71614","full_name":"Katsch, Linda","first_name":"Linda"},{"first_name":"Jan","last_name":"Schneider","id":"13209","full_name":"Schneider, Jan","orcid":"0000-0001-6401-8873"}],"year":"2021","department":[{"_id":"DEP4018"},{"_id":"DEP1308"},{"_id":"DEP4028"}],"issue":"14","status":"public","page":"340-343","publisher":"Fachverlag Hans Carl GmbH"},{"citation":{"short":"S. Witte, G. Falkemeier, V. Lohweg, in: M.L. Hofmann, K. Lemme, J. Löffl, J. Nautz (Eds.), 50 Jahre Technische Hochschule Ostwestfalen-Lippe, Spurbuchverlag, Baunach, 2021, pp. 145–154.","chicago-de":"Witte, Stefan, Guido Falkemeier und Volker Lohweg. 2021. Innovationskette Bildung, Forschung und Wirtschaft als strategisches Element der Technischen Hochschule Ostwestfalen-Lippe. In: 50 Jahre Technische Hochschule Ostwestfalen-Lippe, hg. von Martin Ludwig Hofmann, Kathrin Lemme, Josef Löffl, und Jürgen Nautz, 145–154. Baunach: Spurbuchverlag.","din1505-2-1":"Witte, Stefan ; Falkemeier, Guido ; Lohweg, Volker: Innovationskette Bildung, Forschung und Wirtschaft als strategisches Element der Technischen Hochschule Ostwestfalen-Lippe. In: Hofmann, M. L. ; Lemme, K. ; Löffl, J. ; Nautz, J. (Hrsg.): 50 Jahre Technische Hochschule Ostwestfalen-Lippe. Baunach : Spurbuchverlag, 2021, S. 145–154","ieee":"S. Witte, G. Falkemeier, and V. Lohweg, “Innovationskette Bildung, Forschung und Wirtschaft als strategisches Element der Technischen Hochschule Ostwestfalen-Lippe,” in 50 Jahre Technische Hochschule Ostwestfalen-Lippe, M. L. Hofmann, K. Lemme, J. Löffl, and J. Nautz, Eds. Baunach: Spurbuchverlag, 2021, pp. 145–154.","apa":"Witte, S., Falkemeier, G., & Lohweg, V. (2021). Innovationskette Bildung, Forschung und Wirtschaft als strategisches Element der Technischen Hochschule Ostwestfalen-Lippe. In M. L. Hofmann, K. Lemme, J. Löffl, & J. Nautz (Eds.), 50 Jahre Technische Hochschule Ostwestfalen-Lippe (pp. 145–154). Spurbuchverlag.","chicago":"Witte, Stefan, Guido Falkemeier, and Volker Lohweg. “Innovationskette Bildung, Forschung und Wirtschaft als strategisches Element der Technischen Hochschule Ostwestfalen-Lippe.” In 50 Jahre Technische Hochschule Ostwestfalen-Lippe, edited by Martin Ludwig Hofmann, Kathrin Lemme, Josef Löffl, and Jürgen Nautz, 145–54. Baunach: Spurbuchverlag, 2021.","ama":"Witte S, Falkemeier G, Lohweg V. Innovationskette Bildung, Forschung und Wirtschaft als strategisches Element der Technischen Hochschule Ostwestfalen-Lippe. In: Hofmann ML, Lemme K, Löffl J, Nautz J, eds. 50 Jahre Technische Hochschule Ostwestfalen-Lippe. Spurbuchverlag; 2021:145-154.","van":"Witte S, Falkemeier G, Lohweg V. Innovationskette Bildung, Forschung und Wirtschaft als strategisches Element der Technischen Hochschule Ostwestfalen-Lippe. In: Hofmann ML, Lemme K, Löffl J, Nautz J, editors. 50 Jahre Technische Hochschule Ostwestfalen-Lippe. Baunach: Spurbuchverlag; 2021. p. 145–54.","havard":"S. Witte, G. Falkemeier, V. Lohweg, Innovationskette Bildung, Forschung und Wirtschaft als strategisches Element der Technischen Hochschule Ostwestfalen-Lippe, in: M.L. Hofmann, K. Lemme, J. Löffl, J. Nautz (Eds.), 50 Jahre Technische Hochschule Ostwestfalen-Lippe, Spurbuchverlag, Baunach, 2021: pp. 145–154.","bjps":"Witte S, Falkemeier G and Lohweg V (2021) Innovationskette Bildung, Forschung und Wirtschaft als strategisches Element der Technischen Hochschule Ostwestfalen-Lippe. In Hofmann ML et al. (eds), 50 Jahre Technische Hochschule Ostwestfalen-Lippe. Baunach: Spurbuchverlag, pp. 145–154.","mla":"Witte, Stefan, et al. “Innovationskette Bildung, Forschung und Wirtschaft als strategisches Element der Technischen Hochschule Ostwestfalen-Lippe.” 50 Jahre Technische Hochschule Ostwestfalen-Lippe, edited by Martin Ludwig Hofmann et al., Spurbuchverlag, 2021, pp. 145–54.","ufg":"Witte, Stefan/Falkemeier, Guido/Lohweg, Volker: Innovationskette Bildung, Forschung und Wirtschaft als strategisches Element der Technischen Hochschule Ostwestfalen-Lippe, in: Hofmann, Martin Ludwig u. a. (Hgg.): 50 Jahre Technische Hochschule Ostwestfalen-Lippe, Baunach 2021, S. 145–154."},"publication_status":"published","title":"Innovationskette Bildung, Forschung und Wirtschaft als strategisches Element der Technischen Hochschule Ostwestfalen-Lippe","publisher":"Spurbuchverlag","status":"public","page":"145-154","author":[{"first_name":"Stefan","last_name":"Witte","full_name":"Witte, Stefan","id":"1605"},{"id":"29084","last_name":"Falkemeier","full_name":"Falkemeier, Guido","first_name":"Guido"},{"last_name":"Lohweg","id":"1804","full_name":"Lohweg, Volker","first_name":"Volker","orcid":"0000-0002-3325-7887"}],"year":"2021","department":[{"_id":"DEP2000"},{"_id":"DEP5023"}],"editor":[{"full_name":"Hofmann, Martin Ludwig","last_name":"Hofmann","id":"27490","first_name":"Martin Ludwig"},{"last_name":"Lemme","first_name":"Kathrin","id":"29189","full_name":"Lemme, Kathrin"},{"id":"71937","first_name":"Josef","last_name":"Löffl","full_name":"Löffl, Josef"},{"first_name":"Jürgen","last_name":"Nautz","id":"46509","full_name":"Nautz, Jürgen"}],"user_id":"83781","date_updated":"2025-02-10T08:30:26Z","popular_science":"1","publication":"50 Jahre Technische Hochschule Ostwestfalen-Lippe","publication_identifier":{"isbn":["978-3-88778-622-9"]},"date_created":"2025-02-10T08:00:39Z","type":"book_chapter","_id":"12416","place":"Baunach","language":[{"iso":"ger"}]},{"citation":{"ieee":"S. Witte and L. Mellies, “Werkstattbericht zur Forschungsstrategie an der Technischen Hochschule OWL,” in 50 Jahre Technische Hochschule Ostwestfalen-Lippe, M. L. Hofmann, K. Lemme, J. Löffl, and J. Nautz, Eds. Baunach: Spurbuchverlag, 2021, pp. 155–164.","apa":"Witte, S., & Mellies, L. (2021). Werkstattbericht zur Forschungsstrategie an der Technischen Hochschule OWL. In M. L. Hofmann, K. Lemme, J. Löffl, & J. Nautz (Eds.), 50 Jahre Technische Hochschule Ostwestfalen-Lippe (pp. 155–164). Spurbuchverlag.","chicago":"Witte, Stefan, and Lisa Mellies. “Werkstattbericht zur Forschungsstrategie an der Technischen Hochschule OWL.” In 50 Jahre Technische Hochschule Ostwestfalen-Lippe, edited by Martin Ludwig Hofmann, Kathrin Lemme, Josef Löffl, and Jürgen Nautz, 155–64. Baunach: Spurbuchverlag, 2021.","ama":"Witte S, Mellies L. Werkstattbericht zur Forschungsstrategie an der Technischen Hochschule OWL. In: Hofmann ML, Lemme K, Löffl J, Nautz J, eds. 50 Jahre Technische Hochschule Ostwestfalen-Lippe. Spurbuchverlag; 2021:155-164.","van":"Witte S, Mellies L. Werkstattbericht zur Forschungsstrategie an der Technischen Hochschule OWL. In: Hofmann ML, Lemme K, Löffl J, Nautz J, editors. 50 Jahre Technische Hochschule Ostwestfalen-Lippe. Baunach: Spurbuchverlag; 2021. p. 155–64.","mla":"Witte, Stefan, and Lisa Mellies. “Werkstattbericht zur Forschungsstrategie an der Technischen Hochschule OWL.” 50 Jahre Technische Hochschule Ostwestfalen-Lippe, edited by Martin Ludwig Hofmann et al., Spurbuchverlag, 2021, pp. 155–64.","havard":"S. Witte, L. Mellies, Werkstattbericht zur Forschungsstrategie an der Technischen Hochschule OWL, in: M.L. Hofmann, K. Lemme, J. Löffl, J. Nautz (Eds.), 50 Jahre Technische Hochschule Ostwestfalen-Lippe, Spurbuchverlag, Baunach, 2021: pp. 155–164.","bjps":"Witte S and Mellies L (2021) Werkstattbericht zur Forschungsstrategie an der Technischen Hochschule OWL. In Hofmann ML et al. (eds), 50 Jahre Technische Hochschule Ostwestfalen-Lippe. Baunach: Spurbuchverlag, pp. 155–164.","ufg":"Witte, Stefan/Mellies, Lisa: Werkstattbericht zur Forschungsstrategie an der Technischen Hochschule OWL, in: Hofmann, Martin Ludwig u. a. (Hgg.): 50 Jahre Technische Hochschule Ostwestfalen-Lippe, Baunach 2021, S. 155–164.","short":"S. Witte, L. Mellies, in: M.L. Hofmann, K. Lemme, J. Löffl, J. Nautz (Eds.), 50 Jahre Technische Hochschule Ostwestfalen-Lippe, Spurbuchverlag, Baunach, 2021, pp. 155–164.","chicago-de":"Witte, Stefan und Lisa Mellies. 2021. Werkstattbericht zur Forschungsstrategie an der Technischen Hochschule OWL. In: 50 Jahre Technische Hochschule Ostwestfalen-Lippe, hg. von Martin Ludwig Hofmann, Kathrin Lemme, Josef Löffl, und Jürgen Nautz, 155–164. Baunach: Spurbuchverlag.","din1505-2-1":"Witte, Stefan ; Mellies, Lisa: Werkstattbericht zur Forschungsstrategie an der Technischen Hochschule OWL. In: Hofmann, M. L. ; Lemme, K. ; Löffl, J. ; Nautz, J. (Hrsg.): 50 Jahre Technische Hochschule Ostwestfalen-Lippe. Baunach : Spurbuchverlag, 2021, S. 155–164"},"publication_status":"published","title":"Werkstattbericht zur Forschungsstrategie an der Technischen Hochschule OWL","publisher":"Spurbuchverlag","status":"public","page":"155-164","author":[{"full_name":"Witte, Stefan","first_name":"Stefan","id":"1605","last_name":"Witte"},{"last_name":"Mellies","full_name":"Mellies, Lisa","id":"42250","first_name":"Lisa"}],"year":"2021","department":[{"_id":"DEP5023"},{"_id":"DEP1403"}],"editor":[{"first_name":"Martin Ludwig","full_name":"Hofmann, Martin Ludwig","id":"27490","last_name":"Hofmann"},{"first_name":"Kathrin","full_name":"Lemme, Kathrin","last_name":"Lemme","id":"29189"},{"id":"71937","last_name":"Löffl","full_name":"Löffl, Josef","first_name":"Josef"},{"first_name":"Jürgen","id":"46509","last_name":"Nautz","full_name":"Nautz, Jürgen"}],"user_id":"83781","popular_science":"1","date_updated":"2025-02-10T08:30:21Z","publication":"50 Jahre Technische Hochschule Ostwestfalen-Lippe","publication_identifier":{"isbn":["978-3-88778-622-9"]},"type":"book_chapter","date_created":"2025-02-10T08:05:03Z","_id":"12417","place":"Baunach","language":[{"iso":"ger"}]},{"editor":[{"first_name":"A.","last_name":"Banerjee","full_name":"Banerjee, A."},{"full_name":"Fukumizu, K.","last_name":"Fukumizu","first_name":"K."}],"date_updated":"2025-06-26T13:42:36Z","date_created":"2025-04-14T13:58:16Z","publication":"24th International Conference on Artificial Intelligence and Statistics (AISTATS)","publication_identifier":{"issn":["2640-3498"]},"language":[{"iso":"eng"}],"keyword":["FUNCTIONAL REGRESSION","PREDICTION","ALGORITHMS","COMPLEXITY","MODELS"],"volume":130,"citation":{"bjps":"Lange-Hegermann M (2021) Linearly Constrained Gaussian Processes with Boundary Conditions, Banerjee A and Fukumizu K (eds). MLResearchPress .","havard":"M. Lange-Hegermann, Linearly Constrained Gaussian Processes with Boundary Conditions, MLResearchPress , 2021.","mla":"Lange-Hegermann, Markus. “Linearly Constrained Gaussian Processes with Boundary Conditions.” 24th International Conference on Artificial Intelligence and Statistics (AISTATS), edited by A. Banerjee and K. Fukumizu, vol. 130, MLResearchPress , 2021.","ufg":"Lange-Hegermann, Markus: Linearly Constrained Gaussian Processes with Boundary Conditions, Bd. 130, hg. von Banerjee, A./Fukumizu, K., o. O. 2021 (Proceedings of machine learning research : PMLR ).","ama":"Lange-Hegermann M. Linearly Constrained Gaussian Processes with Boundary Conditions. Vol 130. (Banerjee A, Fukumizu K, eds.). MLResearchPress ; 2021.","van":"Lange-Hegermann M. Linearly Constrained Gaussian Processes with Boundary Conditions. Banerjee A, Fukumizu K, editors. 24th International Conference on Artificial Intelligence and Statistics (AISTATS). MLResearchPress ; 2021. (Proceedings of machine learning research : PMLR ; vol. 130).","chicago":"Lange-Hegermann, Markus. Linearly Constrained Gaussian Processes with Boundary Conditions. Edited by A. Banerjee and K. Fukumizu. 24th International Conference on Artificial Intelligence and Statistics (AISTATS). Vol. 130. Proceedings of Machine Learning Research : PMLR . MLResearchPress , 2021.","ieee":"M. Lange-Hegermann, Linearly Constrained Gaussian Processes with Boundary Conditions, vol. 130. MLResearchPress , 2021.","apa":"Lange-Hegermann, M. (2021). Linearly Constrained Gaussian Processes with Boundary Conditions. In A. Banerjee & K. Fukumizu (Eds.), 24th International Conference on Artificial Intelligence and Statistics (AISTATS) (Vol. 130). MLResearchPress .","din1505-2-1":"Lange-Hegermann, Markus ; Banerjee, A. ; Fukumizu, K. (Hrsg.): Linearly Constrained Gaussian Processes with Boundary Conditions, Proceedings of machine learning research : PMLR . Bd. 130 : MLResearchPress , 2021","chicago-de":"Lange-Hegermann, Markus. 2021. Linearly Constrained Gaussian Processes with Boundary Conditions. Hg. von A. Banerjee und K. Fukumizu. 24th International Conference on Artificial Intelligence and Statistics (AISTATS). Bd. 130. Proceedings of machine learning research : PMLR . MLResearchPress .","short":"M. Lange-Hegermann, Linearly Constrained Gaussian Processes with Boundary Conditions, MLResearchPress , 2021."},"title":"Linearly Constrained Gaussian Processes with Boundary Conditions","status":"public","year":"2021","author":[{"first_name":"Markus","id":"71761","full_name":"Lange-Hegermann, Markus","last_name":"Lange-Hegermann"}],"intvolume":" 130","user_id":"83781","type":"conference_editor_article","_id":"12786","publication_status":"published","series_title":"Proceedings of machine learning research : PMLR ","quality_controlled":"1","publisher":"MLResearchPress ","abstract":[{"lang":"eng","text":"One goal in Bayesian machine learning is to encode prior knowledge into prior distributions, to model data efficiently. We consider prior knowledge from systems of linear partial differential equations together with their boundary conditions. We construct multi-output Gaussian process priors with realizations in the solution set of such systems, in particular only such solutions can be represented by Gaussian process regression. The construction is fully algorithmic via Grobner bases and it does not employ any approximation. It builds these priors combining two parametrizations via a pullback: the first parametrizes the solutions for the system of differential equations and the second parametrizes all functions adhering to the boundary conditions."}],"conference":{"location":"Virtual","name":"24th International Conference on Artificial Intelligence and Statistics (AISTATS)","start_date":"2021-04-13","end_date":"2021-04-15"},"department":[{"_id":"DEP5000"},{"_id":"DEP5023"}]},{"date_created":"2025-04-15T13:05:17Z","publication":"The International Journal of Advanced Manufacturing Technology","publication_identifier":{"issn":["0268-3768"],"eissn":["1433-3015"]},"date_updated":"2025-06-26T13:39:22Z","language":[{"iso":"eng"}],"keyword":["Cognition","Industry 40","Big data platform","Machine learning","CPPS","Optimization","Algorithm selection","Simulation"],"title":"Cognitive capabilities for the CAAI in cyber-physical production systems","citation":{"ieee":"J. Strohschein, A. Fischbach, A. Bunte, H. Faeskorn-Woyke, N. Moriz, and T. Bartz-Beielstein, “Cognitive capabilities for the CAAI in cyber-physical production systems,” The International Journal of Advanced Manufacturing Technology, vol. 115, no. 11–12, pp. 3513–3532, 2021, doi: 10.1007/s00170-021-07248-3.","ama":"Strohschein J, Fischbach A, Bunte A, Faeskorn-Woyke H, Moriz N, Bartz-Beielstein T. Cognitive capabilities for the CAAI in cyber-physical production systems. The International Journal of Advanced Manufacturing Technology. 2021;115(11-12):3513-3532. doi:10.1007/s00170-021-07248-3","chicago":"Strohschein, Jan, Andreas Fischbach, Andreas Bunte, Heide Faeskorn-Woyke, Natalia Moriz, and Thomas Bartz-Beielstein. “Cognitive Capabilities for the CAAI in Cyber-Physical Production Systems.” The International Journal of Advanced Manufacturing Technology 115, no. 11–12 (2021): 3513–32. https://doi.org/10.1007/s00170-021-07248-3.","apa":"Strohschein, J., Fischbach, A., Bunte, A., Faeskorn-Woyke, H., Moriz, N., & Bartz-Beielstein, T. (2021). Cognitive capabilities for the CAAI in cyber-physical production systems. The International Journal of Advanced Manufacturing Technology, 115(11–12), 3513–3532. https://doi.org/10.1007/s00170-021-07248-3","mla":"Strohschein, Jan, et al. “Cognitive Capabilities for the CAAI in Cyber-Physical Production Systems.” The International Journal of Advanced Manufacturing Technology, vol. 115, no. 11–12, 2021, pp. 3513–32, https://doi.org/10.1007/s00170-021-07248-3.","havard":"J. Strohschein, A. Fischbach, A. Bunte, H. Faeskorn-Woyke, N. Moriz, T. Bartz-Beielstein, Cognitive capabilities for the CAAI in cyber-physical production systems, The International Journal of Advanced Manufacturing Technology. 115 (2021) 3513–3532.","bjps":"Strohschein J et al. (2021) Cognitive Capabilities for the CAAI in Cyber-Physical Production Systems. The International Journal of Advanced Manufacturing Technology 115, 3513–3532.","ufg":"Strohschein, Jan u. a.: Cognitive capabilities for the CAAI in cyber-physical production systems, in: The International Journal of Advanced Manufacturing Technology 115 (2021), H. 11–12, S. 3513–3532.","van":"Strohschein J, Fischbach A, Bunte A, Faeskorn-Woyke H, Moriz N, Bartz-Beielstein T. Cognitive capabilities for the CAAI in cyber-physical production systems. The International Journal of Advanced Manufacturing Technology. 2021;115(11–12):3513–32.","din1505-2-1":"Strohschein, Jan ; Fischbach, Andreas ; Bunte, Andreas ; Faeskorn-Woyke, Heide ; Moriz, Natalia ; Bartz-Beielstein, Thomas: Cognitive capabilities for the CAAI in cyber-physical production systems. In: The International Journal of Advanced Manufacturing Technology Bd. 115. London [u.a.], Springer (2021), Nr. 11–12, S. 3513–3532","chicago-de":"Strohschein, Jan, Andreas Fischbach, Andreas Bunte, Heide Faeskorn-Woyke, Natalia Moriz und Thomas Bartz-Beielstein. 2021. Cognitive capabilities for the CAAI in cyber-physical production systems. The International Journal of Advanced Manufacturing Technology 115, Nr. 11–12: 3513–3532. doi:10.1007/s00170-021-07248-3, .","short":"J. Strohschein, A. Fischbach, A. Bunte, H. Faeskorn-Woyke, N. Moriz, T. Bartz-Beielstein, The International Journal of Advanced Manufacturing Technology 115 (2021) 3513–3532."},"volume":115,"external_id":{"isi":["000659025000010"]},"author":[{"full_name":"Strohschein, Jan","first_name":"Jan","last_name":"Strohschein"},{"first_name":"Andreas","last_name":"Fischbach","full_name":"Fischbach, Andreas"},{"first_name":"Andreas","full_name":"Bunte, Andreas","id":"58885","last_name":"Bunte"},{"first_name":"Heide","full_name":"Faeskorn-Woyke, Heide","last_name":"Faeskorn-Woyke"},{"full_name":"Moriz, Natalia","id":"44238","first_name":"Natalia","last_name":"Moriz"},{"first_name":"Thomas","full_name":"Bartz-Beielstein, Thomas","last_name":"Bartz-Beielstein"}],"year":"2021","page":"3513-3532","status":"public","type":"scientific_journal_article","intvolume":" 115","user_id":"83781","doi":"10.1007/s00170-021-07248-3","_id":"12800","place":"London [u.a.]","isi":"1","publication_status":"published","issue":"11-12","abstract":[{"text":"his paper presents the cognitive module of the Cognitive Architecture for Artificial Intelligence (CAAI) in cyber-physical production systems (CPPS). The goal of this architecture is to reduce the implementation effort of artificial intelligence (AI) algorithms in CPPS. Declarative user goals and the provided algorithm-knowledge base allow the dynamic pipeline orchestration and configuration. A big data platform (BDP) instantiates the pipelines and monitors the CPPS performance for further evaluation through the cognitive module. Thus, the cognitive module is able to select feasible and robust configurations for process pipelines in varying use cases. Furthermore, it automatically adapts the models and algorithms based on model quality and resource consumption. The cognitive module also instantiates additional pipelines to evaluate algorithms from different classes on test functions. CAAI relies on well-defined interfaces to enable the integration of additional modules and reduce implementation effort. Finally, an implementation based on Docker, Kubernetes, and Kafka for the virtualization and orchestration of the individual modules and as messaging technology for module communication is used to evaluate a real-world use case.","lang":"eng"}],"department":[{"_id":"DEP5023"}],"publisher":"Springer "},{"type":"scientific_journal_article","intvolume":" 15","user_id":"83781","doi":"10.1002/bbb.2201","_id":"12805","place":"Chichester","isi":"1","publication_status":"published","issue":"3","abstract":[{"lang":"eng","text":"n recent decades, the demand for palm oil has constantly increased and with it the cultivation of oil palms. After a period of 25 years, the oil yield of the palm trees decreases and they are felled. The trees are cut into pieces and remain on the plantations. However, due to their high moisture and sugar content, fungi and molds cause problems for replanting. The use of the wood for the timber industry is difficult due to its structural characteristics. Biotechnological processes use microorganisms to produce relevant industrial products. The basis for each process is a culture medium that contains all necessary nutrients, especially carbohydrates. The culture medium makes up a high percentage of the costs, so alternative, cheaper substrates are preferred. In this review, we show and compare different analyses of the sap mechanically pressed from the oil palm trunk regarding its sugar and nutrient content. The total sugar concentration in the palm sap varies between 16.97–140 g L−1 and it is mainly composed of glucose, fructose, and sucrose. The comparison with common nutrient media and the results of fermentation processes already carried out on a laboratory scale show that palm sap offers great potential as a fermentation medium for biotechnological conversion into industrially relevant products. "}],"department":[{"_id":"DEP4000"},{"_id":"DEP4028"},{"_id":"DEP4018"}],"publisher":"Wiley","date_created":"2025-04-16T07:00:19Z","publication":"Biofuels, Bioproducts and Biorefining","publication_identifier":{"eissn":["1932-1031"],"issn":["1932-104X"]},"date_updated":"2025-06-26T13:37:39Z","language":[{"iso":"eng"}],"keyword":["oil palm","trunks","pressed sap","Elaeis guineensis","sugar","nutrients","review"],"title":"Pressed sap from oil palm (Elaeis guineensis) trunks: a revolutionary growth medium for the biotechnological industry?","citation":{"short":"R. Dirkes, P.R. Neubauer, J. Rabenhorst, Biofuels, Bioproducts and Biorefining 15 (2021) 931–944.","din1505-2-1":"Dirkes, Rabea ; Neubauer, Pia Rebecca ; Rabenhorst, Jürgen: Pressed sap from oil palm (<scp>Elaeis guineensis</scp>) trunks: a revolutionary growth medium for the biotechnological industry? In: Biofuels, Bioproducts and Biorefining Bd. 15. Chichester, Wiley (2021), Nr. 3, S. 931–944","chicago-de":"Dirkes, Rabea, Pia Rebecca Neubauer und Jürgen Rabenhorst. 2021. Pressed sap from oil palm (<scp>Elaeis guineensis</scp>) trunks: a revolutionary growth medium for the biotechnological industry? Biofuels, Bioproducts and Biorefining 15, Nr. 3: 931–944. doi:10.1002/bbb.2201, .","van":"Dirkes R, Neubauer PR, Rabenhorst J. Pressed sap from oil palm (<scp>Elaeis guineensis</scp>) trunks: a revolutionary growth medium for the biotechnological industry? Biofuels, Bioproducts and Biorefining. 2021;15(3):931–44.","ama":"Dirkes R, Neubauer PR, Rabenhorst J. Pressed sap from oil palm (<scp>Elaeis guineensis</scp>) trunks: a revolutionary growth medium for the biotechnological industry? Biofuels, Bioproducts and Biorefining. 2021;15(3):931-944. doi:10.1002/bbb.2201","ufg":"Dirkes, Rabea/Neubauer, Pia Rebecca/Rabenhorst, Jürgen: Pressed sap from oil palm (<scp>Elaeis guineensis</scp>) trunks: a revolutionary growth medium for the biotechnological industry?, in: Biofuels, Bioproducts and Biorefining 15 (2021), H. 3, S. 931–944.","havard":"R. Dirkes, P.R. Neubauer, J. Rabenhorst, Pressed sap from oil palm (<scp>Elaeis guineensis</scp>) trunks: a revolutionary growth medium for the biotechnological industry?, Biofuels, Bioproducts and Biorefining. 15 (2021) 931–944.","mla":"Dirkes, Rabea, et al. “Pressed Sap from Oil Palm (<scp>Elaeis Guineensis</Scp>) Trunks: A Revolutionary Growth Medium for the Biotechnological Industry?” Biofuels, Bioproducts and Biorefining, vol. 15, no. 3, 2021, pp. 931–44, https://doi.org/10.1002/bbb.2201.","bjps":"Dirkes R, Neubauer PR and Rabenhorst J (2021) Pressed Sap from Oil Palm (<scp>Elaeis Guineensis</Scp>) Trunks: A Revolutionary Growth Medium for the Biotechnological Industry? Biofuels, Bioproducts and Biorefining 15, 931–944.","apa":"Dirkes, R., Neubauer, P. R., & Rabenhorst, J. (2021). Pressed sap from oil palm (<scp>Elaeis guineensis</scp>) trunks: a revolutionary growth medium for the biotechnological industry? Biofuels, Bioproducts and Biorefining, 15(3), 931–944. https://doi.org/10.1002/bbb.2201","ieee":"R. Dirkes, P. R. Neubauer, and J. Rabenhorst, “Pressed sap from oil palm (<scp>Elaeis guineensis</scp>) trunks: a revolutionary growth medium for the biotechnological industry?,” Biofuels, Bioproducts and Biorefining, vol. 15, no. 3, pp. 931–944, 2021, doi: 10.1002/bbb.2201.","chicago":"Dirkes, Rabea, Pia Rebecca Neubauer, and Jürgen Rabenhorst. “Pressed Sap from Oil Palm (<scp>Elaeis Guineensis</Scp>) Trunks: A Revolutionary Growth Medium for the Biotechnological Industry?” Biofuels, Bioproducts and Biorefining 15, no. 3 (2021): 931–44. https://doi.org/10.1002/bbb.2201."},"volume":15,"external_id":{"isi":["000625400200001"]},"author":[{"first_name":"Rabea","full_name":"Dirkes, Rabea","last_name":"Dirkes","id":"68594"},{"full_name":"Neubauer, Pia Rebecca","first_name":"Pia Rebecca","last_name":"Neubauer","id":"75420"},{"id":"13454","first_name":"Jürgen","full_name":"Rabenhorst, Jürgen","last_name":"Rabenhorst"}],"year":"2021","page":"931-944","status":"public"},{"volume":79,"citation":{"chicago-de":"Dally, Benjamin, Kai-Fabian Henning, Carsten Oldenburg, Axel Häusler, Klaus Greve und Sebastian Kühle. 2021. myField: Ein webbasiertes Partizipations-Tool zur Simulation und Eigenabschätzung nachbarschaftlicher Energie- und Umweltschutzvorhaben. In: Flächennutzungsmonitoring XIII: Flächenpolitik - Konzepte - Analysen - Tools, 79:293–302. IÖR Schriften. Berlin: Rhombos-Verlag. doi:https://doi.org/10.26084/13dfns-p027, .","din1505-2-1":"Dally, Benjamin ; Henning, Kai-Fabian ; Oldenburg, Carsten ; Häusler, Axel ; Greve, Klaus ; Kühle, Sebastian: myField: Ein webbasiertes Partizipations-Tool zur Simulation und Eigenabschätzung nachbarschaftlicher Energie- und Umweltschutzvorhaben. In: Flächennutzungsmonitoring XIII: Flächenpolitik - Konzepte - Analysen - Tools, IÖR Schriften. Bd. 79. Berlin : Rhombos-Verlag, 2021, S. 293–302","short":"B. Dally, K.-F. Henning, C. Oldenburg, A. Häusler, K. Greve, S. Kühle, in: Flächennutzungsmonitoring XIII: Flächenpolitik - Konzepte - Analysen - Tools, Rhombos-Verlag, Berlin, 2021, pp. 293–302.","chicago":"Dally, Benjamin, Kai-Fabian Henning, Carsten Oldenburg, Axel Häusler, Klaus Greve, and Sebastian Kühle. “myField: Ein webbasiertes Partizipations-Tool zur Simulation und Eigenabschätzung nachbarschaftlicher Energie- und Umweltschutzvorhaben.” In Flächennutzungsmonitoring XIII: Flächenpolitik - Konzepte - Analysen - Tools, 79:293–302. IÖR Schriften. Berlin: Rhombos-Verlag, 2021. https://doi.org/10.26084/13dfns-p027.","apa":"Dally, B., Henning, K.-F., Oldenburg, C., Häusler, A., Greve, K., & Kühle, S. (2021). myField: Ein webbasiertes Partizipations-Tool zur Simulation und Eigenabschätzung nachbarschaftlicher Energie- und Umweltschutzvorhaben. In Flächennutzungsmonitoring XIII: Flächenpolitik - Konzepte - Analysen - Tools (Vol. 79, pp. 293–302). Rhombos-Verlag. https://doi.org/10.26084/13dfns-p027","ieee":"B. Dally, K.-F. Henning, C. Oldenburg, A. Häusler, K. Greve, and S. Kühle, “myField: Ein webbasiertes Partizipations-Tool zur Simulation und Eigenabschätzung nachbarschaftlicher Energie- und Umweltschutzvorhaben,” in Flächennutzungsmonitoring XIII: Flächenpolitik - Konzepte - Analysen - Tools, vol. 79, Berlin: Rhombos-Verlag, 2021, pp. 293–302. doi: https://doi.org/10.26084/13dfns-p027.","ufg":"Dally, Benjamin u. a.: myField: Ein webbasiertes Partizipations-Tool zur Simulation und Eigenabschätzung nachbarschaftlicher Energie- und Umweltschutzvorhaben, in: o. Hg.: Flächennutzungsmonitoring XIII: Flächenpolitik - Konzepte - Analysen - Tools, Bd. 79, Berlin 2021 (IÖR Schriften), S. 293–302.","bjps":"Dally B et al. (2021) myField: Ein webbasiertes Partizipations-Tool zur Simulation und Eigenabschätzung nachbarschaftlicher Energie- und Umweltschutzvorhaben. Flächennutzungsmonitoring XIII: Flächenpolitik - Konzepte - Analysen - Tools, vol. 79. Berlin: Rhombos-Verlag, pp. 293–302.","havard":"B. Dally, K.-F. Henning, C. Oldenburg, A. Häusler, K. Greve, S. Kühle, myField: Ein webbasiertes Partizipations-Tool zur Simulation und Eigenabschätzung nachbarschaftlicher Energie- und Umweltschutzvorhaben, in: Flächennutzungsmonitoring XIII: Flächenpolitik - Konzepte - Analysen - Tools, Rhombos-Verlag, Berlin, 2021: pp. 293–302.","mla":"Dally, Benjamin, et al. “myField: Ein webbasiertes Partizipations-Tool zur Simulation und Eigenabschätzung nachbarschaftlicher Energie- und Umweltschutzvorhaben.” Flächennutzungsmonitoring XIII: Flächenpolitik - Konzepte - Analysen - Tools, vol. 79, Rhombos-Verlag, 2021, pp. 293–302, https://doi.org/10.26084/13dfns-p027.","van":"Dally B, Henning KF, Oldenburg C, Häusler A, Greve K, Kühle S. myField: Ein webbasiertes Partizipations-Tool zur Simulation und Eigenabschätzung nachbarschaftlicher Energie- und Umweltschutzvorhaben. In: Flächennutzungsmonitoring XIII: Flächenpolitik - Konzepte - Analysen - Tools. Berlin: Rhombos-Verlag; 2021. p. 293–302. (IÖR Schriften; vol. 79).","ama":"Dally B, Henning KF, Oldenburg C, Häusler A, Greve K, Kühle S. myField: Ein webbasiertes Partizipations-Tool zur Simulation und Eigenabschätzung nachbarschaftlicher Energie- und Umweltschutzvorhaben. In: Flächennutzungsmonitoring XIII: Flächenpolitik - Konzepte - Analysen - Tools. Vol 79. IÖR Schriften. Rhombos-Verlag; 2021:293-302. doi:https://doi.org/10.26084/13dfns-p027"},"title":"myField: Ein webbasiertes Partizipations-Tool zur Simulation und Eigenabschätzung nachbarschaftlicher Energie- und Umweltschutzvorhaben","status":"public","page":"293-302","author":[{"first_name":"Benjamin","id":"56914","last_name":"Dally","full_name":"Dally, Benjamin"},{"id":"44017","last_name":"Henning","full_name":"Henning, Kai-Fabian","first_name":"Kai-Fabian"},{"last_name":"Oldenburg","full_name":"Oldenburg, Carsten","first_name":"Carsten","id":"75372"},{"orcid":"0009-0001-8565-8199","id":"61520","full_name":"Häusler, Axel","first_name":"Axel","last_name":"Häusler"},{"first_name":"Klaus","last_name":"Greve","full_name":"Greve, Klaus"},{"full_name":"Kühle, Sebastian","last_name":"Kühle","first_name":"Sebastian"}],"year":"2021","main_file_link":[{"open_access":"1","url":"https://www.ssoar.info/ssoar/bitstream/handle/document/79054/ssoar-2021-dally_et_al-myField_Ein_webbasiertes_Partizipations-Tool_zur.pdf?sequence=1&isAllowed=y&lnkname=ssoar-2021-dally_et_al-myField_Ein_webbasiertes_Partizipations-Tool_zur.pdf"}],"date_updated":"2025-11-20T12:32:18Z","publication_identifier":{"isbn":["978-3-944101-79-8"]},"publication":"Flächennutzungsmonitoring XIII: Flächenpolitik - Konzepte - Analysen - Tools","date_created":"2025-11-13T11:36:11Z","keyword":["Raumplanung","spatial planning","Partizipation","participation","Flächennutzung","area utilization","Umweltschutz","environmental protection","Simulation","simulation","Bundesrepublik Deutschland","Federal Republic of Germany"],"language":[{"iso":"ger"}],"oa":"1","publication_status":"published","series_title":"IÖR Schriften","publisher":"Rhombos-Verlag","abstract":[{"text":"Die Energiewende und die Erreichung der politisch formulierten und gesellschaftlich gewollten Umweltschutzziele bedarf zukunftstauglicher Planungswerkzeuge, die sowohl die übergeordnete Verwaltungsperspektive als auch die Perspektive der individuellen Nachbarschaften vor Ort berücksichtigen. Im Idealfall sollten diese beiden Perspektiven zu einem gemeinsamen Interessenmanagement zusammengeführt werden. Folglich stellen der Informationserwerb und das Erlernen der relevanten Zusammenhänge und Wechselwirkungen entscheidende Faktoren zum Gelingen dieses Transformationsprozesses dar. Das webbasierte Tool myField soll es den Bürger*innen ermöglichen, im persönlichen Wohnumfeld projektorientierte Maßnahmen zur Erzeugung umweltschutzorientierter Energievorhaben zu projektieren und durch Simulations- und Eigenabschätzungsverfahren eine Optimierung solcher Projektideen vorzunehmen. myField bietet neben der computerspiel-ähnlichen 3D-Welt zusätzlich eine Cloud-Plattform zur Kommunikation kollaborativer Ideen und zur Vernetzung zwischen den Akteur*innen. myField wurde vom Forschungsschwerpunkt nextPlace der Technischen Hochschule Ostwestfalen-Lippe in Kooperation mit der Arbeitsgruppe GIS des Geografischen Instituts der Universität Bonn als interaktive Softwareapplikation auf Basis der Gaming-Engine Unity3D entwickelt. Die ersten Arbeitsschritte beinhalteten Literatur- und Software-Recherchen zur inhaltlichen Positionierung. Die Kernarbeit bestand aus der Programmierung des Software-Prototypen und der Implementierung amtlicher Geodateninfrastrukturen. Die Entwicklungsarbeit wurde gefördert durch die Deutsche Bundesstiftung Umwelt (DBU), begleitet durch Expertengespräche, Rückkopplungen mit Fachvertretern der Beispielumgebung LEADER-Region Nordlippe und einzelnen Anwendertests.","lang":"eng"}],"department":[{"_id":"DEP1055"},{"_id":"DEP1000"},{"_id":"DEP1004"},{"_id":"DEP1304"}],"conference":{"start_date":"2021-06-08","end_date":"2021-06-08","location":"Dresden","name":"13. Dresdner Flächennutzungssymposium"},"intvolume":" 79","user_id":"83781","type":"book_chapter","_id":"13300","doi":"https://doi.org/10.26084/13dfns-p027","place":"Berlin"},{"status":"public","conference":{"start_date":"10.11.2020","end_date":"11.11.2020","location":"Detmold","name":"71. Bäckereitechnologie-Tagung"},"department":[{"_id":"DEP4023"}],"year":2020,"author":[{"id":"74203","first_name":"Sebastian","last_name":"Wittland","full_name":"Wittland, Sebastian"}],"publication_status":"published","citation":{"van":"Wittland S. Neuartige Zucker in Backwaren – Ist Allulose eine Alternative? In 2020.","ama":"Wittland S. Neuartige Zucker in Backwaren – Ist Allulose eine Alternative? In: ; 2020.","ufg":"Wittland, Sebastian (2020): Neuartige Zucker in Backwaren – Ist Allulose eine Alternative?, in: .","mla":"Wittland, Sebastian. Neuartige Zucker in Backwaren – Ist Allulose eine Alternative? 2020.","havard":"S. Wittland, Neuartige Zucker in Backwaren – Ist Allulose eine Alternative?, in: 2020.","bjps":"Wittland S (2020) Neuartige Zucker in Backwaren – Ist Allulose eine Alternative?","apa":"Wittland, S. (2020). Neuartige Zucker in Backwaren – Ist Allulose eine Alternative? Presented at the 71. Bäckereitechnologie-Tagung, Detmold.","ieee":"S. Wittland, “Neuartige Zucker in Backwaren – Ist Allulose eine Alternative?,” presented at the 71. Bäckereitechnologie-Tagung, Detmold, 2020.","chicago":"Wittland, Sebastian. “Neuartige Zucker in Backwaren – Ist Allulose eine Alternative?,” 2020.","short":"S. Wittland, in: 2020.","din1505-2-1":"Wittland, Sebastian: Neuartige Zucker in Backwaren – Ist Allulose eine Alternative? In: , 2020","chicago-de":"Wittland, Sebastian. 2020. Neuartige Zucker in Backwaren – Ist Allulose eine Alternative? In: ."},"title":"Neuartige Zucker in Backwaren – Ist Allulose eine Alternative?","language":[{"iso":"ger"}],"_id":"6712","date_updated":"2023-03-15T13:50:07Z","user_id":"74203","type":"conference","date_created":"2021-11-08T11:42:26Z"},{"series_title":" Proceedings of SPIE","publication_status":"published","department":[{"_id":"DEP5020"},{"_id":"DEP6020"},{"_id":"DEP5000"}],"conference":{"location":"Strasbourg (online)","name":"3D Printed Optics and Additive Photonic Manufacturing ; SPIE Photonics Europe - Digital Forum","end_date":"2020-04-10","start_date":"2020-04-06"},"publisher":"SPIE","type":"conference_editor_article","user_id":"51864","intvolume":" 11349","place":"Bellingham, Washington, USA","doi":"10.1117/12.2555367","_id":"7676","title":"Manufacturing and analyzing of cost-efficient fresnel lenses using stereolithography","citation":{"ama":"Shrotri AN, Beyer M, Stübbe O. Manufacturing and Analyzing of Cost-Efficient Fresnel Lenses Using Stereolithography. Vol 11349. (von Freymann G, Herkommer AM, Flury M, eds.). SPIE; 2020. doi:10.1117/12.2555367","ieee":"A. N. Shrotri, M. Beyer, and O. Stübbe, Manufacturing and analyzing of cost-efficient fresnel lenses using stereolithography, vol. 11349. Bellingham, Washington, USA: SPIE, 2020. doi: 10.1117/12.2555367.","short":"A.N. Shrotri, M. Beyer, O. Stübbe, Manufacturing and Analyzing of Cost-Efficient Fresnel Lenses Using Stereolithography, SPIE, Bellingham, Washington, USA, 2020.","chicago-de":"Shrotri, Abhijeet Narendra, Micha Beyer und Oliver Stübbe. 2020. Manufacturing and analyzing of cost-efficient fresnel lenses using stereolithography. Hg. von Georg von Freymann, Alois M. Herkommer, und Manuel Flury. 3D Printed Optics and Additive Photonic Manufacturing II : 6-10 April 2020, online only, France . Bd. 11349. Proceedings of SPIE. Bellingham, Washington, USA: SPIE. doi:10.1117/12.2555367, .","din1505-2-1":"Shrotri, Abhijeet Narendra ; Beyer, Micha ; Stübbe, Oliver ; von Freymann, G. ; Herkommer, A. M. ; Flury, M. (Hrsg.): Manufacturing and analyzing of cost-efficient fresnel lenses using stereolithography, Proceedings of SPIE. Bd. 11349. Bellingham, Washington, USA : SPIE, 2020","van":"Shrotri AN, Beyer M, Stübbe O. Manufacturing and analyzing of cost-efficient fresnel lenses using stereolithography. von Freymann G, Herkommer AM, Flury M, editors. 3D Printed Optics and Additive Photonic Manufacturing II : 6-10 April 2020, online only, France . Bellingham, Washington, USA: SPIE; 2020. ( Proceedings of SPIE; vol. 11349).","ufg":"Shrotri, Abhijeet Narendra/Beyer, Micha/Stübbe, Oliver: Manufacturing and analyzing of cost-efficient fresnel lenses using stereolithography, Bd. 11349, hg. von Freymann, Georg von/Herkommer, Alois M./Flury, Manuel, Bellingham, Washington, USA 2020 ( Proceedings of SPIE).","bjps":"Shrotri AN, Beyer M and Stübbe O (2020) Manufacturing and Analyzing of Cost-Efficient Fresnel Lenses Using Stereolithography, von Freymann G, Herkommer AM and Flury M (eds). Bellingham, Washington, USA: SPIE.","mla":"Shrotri, Abhijeet Narendra, et al. “Manufacturing and Analyzing of Cost-Efficient Fresnel Lenses Using Stereolithography.” 3D Printed Optics and Additive Photonic Manufacturing II : 6-10 April 2020, Online Only, France , edited by Georg von Freymann et al., vol. 11349, SPIE, 2020, https://doi.org/10.1117/12.2555367.","havard":"A.N. Shrotri, M. Beyer, O. Stübbe, Manufacturing and analyzing of cost-efficient fresnel lenses using stereolithography, SPIE, Bellingham, Washington, USA, 2020.","apa":"Shrotri, A. N., Beyer, M., & Stübbe, O. (2020). Manufacturing and analyzing of cost-efficient fresnel lenses using stereolithography. In G. von Freymann, A. M. Herkommer, & M. Flury (Eds.), 3D Printed Optics and Additive Photonic Manufacturing II : 6-10 April 2020, online only, France (Vol. 11349). SPIE. https://doi.org/10.1117/12.2555367","chicago":"Shrotri, Abhijeet Narendra, Micha Beyer, and Oliver Stübbe. Manufacturing and Analyzing of Cost-Efficient Fresnel Lenses Using Stereolithography. Edited by Georg von Freymann, Alois M. Herkommer, and Manuel Flury. 3D Printed Optics and Additive Photonic Manufacturing II : 6-10 April 2020, Online Only, France . Vol. 11349. Proceedings of SPIE. Bellingham, Washington, USA: SPIE, 2020. https://doi.org/10.1117/12.2555367."},"volume":11349,"year":"2020","author":[{"orcid":"0000-0003-2116-156X","last_name":"Shrotri","first_name":"Abhijeet Narendra","id":"74090","full_name":"Shrotri, Abhijeet Narendra"},{"first_name":"Micha","full_name":"Beyer, Micha","id":"71403","last_name":"Beyer"},{"first_name":"Oliver","full_name":"Stübbe, Oliver","id":"51864","last_name":"Stübbe","orcid":"https://orcid.org/0000-0001-7293-6893"}],"status":"public","date_created":"2022-04-19T10:46:32Z","publication_identifier":{"eisbn":[" 978-1-5106-3471-8 "],"issn":["0277-786X"],"isbn":["978-1-5106-3470-1"],"eissn":["1996-756X"]},"publication":"3D Printed Optics and Additive Photonic Manufacturing II : 6-10 April 2020, online only, France ","date_updated":"2024-04-19T12:02:02Z","editor":[{"full_name":"von Freymann, Georg","first_name":"Georg","last_name":"von Freymann"},{"first_name":"Alois M.","last_name":"Herkommer","full_name":"Herkommer, Alois M."},{"full_name":"Flury, Manuel","first_name":"Manuel","last_name":"Flury"}],"language":[{"iso":"eng"}],"keyword":["Fresnel lenses","Stereolithography apparatus","3D printing","Photo-polymerization"]},{"date_created":"2019-11-22T12:51:11Z","type":"conference","publication":"ODS 2020 Review","date_updated":"2024-05-17T13:23:21Z","user_id":"83781","_id":"1991","language":[{"iso":"eng"}],"place":"San Francisco, USA.","title":"Creating a Self-authentication System for Smart Banknotes","publication_status":"published","citation":{"apa":"Funk, M., Scharf, M., Dörksen, H., Danneel, H.-J., Lohweg, V., Hübner, M., Schaede, J., Stierman, R., Knobloch, A., Le, D. K., Gillich, E., & Mönks, U. (2020). Creating a Self-authentication System for Smart Banknotes. ODS 2020 Review.","chicago":"Funk, Mark, Matthias Scharf, Helene Dörksen, Hans-Jürgen Danneel, Volker Lohweg, Michael Hübner, Johannes Schaede, et al. “Creating a Self-Authentication System for Smart Banknotes.” In ODS 2020 Review. San Francisco, USA., 2020.","van":"Funk M, Scharf M, Dörksen H, Danneel HJ, Lohweg V, Hübner M, et al. Creating a Self-authentication System for Smart Banknotes. In: ODS 2020 Review. San Francisco, USA.; 2020.","ufg":"Funk, Mark u. a.: Creating a Self-authentication System for Smart Banknotes, in: o. Hg.: ODS 2020 Review, San Francisco, USA. 2020.","havard":"M. Funk, M. Scharf, H. Dörksen, H.-J. Danneel, V. Lohweg, M. Hübner, J. Schaede, R. Stierman, A. Knobloch, D.K. Le, E. Gillich, U. Mönks, Creating a Self-authentication System for Smart Banknotes, in: ODS 2020 Review, San Francisco, USA., 2020.","bjps":"Funk M et al. (2020) Creating a Self-Authentication System for Smart Banknotes. ODS 2020 Review. San Francisco, USA.","mla":"Funk, Mark, et al. “Creating a Self-Authentication System for Smart Banknotes.” ODS 2020 Review, 2020.","short":"M. Funk, M. Scharf, H. Dörksen, H.-J. Danneel, V. Lohweg, M. Hübner, J. Schaede, R. Stierman, A. Knobloch, D.K. Le, E. Gillich, U. Mönks, in: ODS 2020 Review, San Francisco, USA., 2020.","din1505-2-1":"Funk, Mark ; Scharf, Matthias ; Dörksen, Helene ; Danneel, Hans-Jürgen ; Lohweg, Volker ; Hübner, Michael ; Schaede, Johannes ; Stierman, Rob ; u. a.: Creating a Self-authentication System for Smart Banknotes. In: ODS 2020 Review. San Francisco, USA., 2020","chicago-de":"Funk, Mark, Matthias Scharf, Helene Dörksen, Hans-Jürgen Danneel, Volker Lohweg, Michael Hübner, Johannes Schaede, u. a. 2020. Creating a Self-authentication System for Smart Banknotes. In: ODS 2020 Review. San Francisco, USA.","ieee":"M. Funk et al., “Creating a Self-authentication System for Smart Banknotes,” San Francisco, 2020.","ama":"Funk M, Scharf M, Dörksen H, et al. Creating a Self-authentication System for Smart Banknotes. In: ODS 2020 Review. ; 2020."},"conference":{"start_date":"2020-01-29","end_date":"2020-01-31","location":"San Francisco"},"department":[{"_id":"DEP5023"},{"_id":"DEP4027"}],"author":[{"first_name":"Mark","id":"52473","full_name":"Funk, Mark","last_name":"Funk"},{"last_name":"Scharf","first_name":"Matthias","id":"65179","full_name":"Scharf, Matthias"},{"first_name":"Helene","last_name":"Dörksen","full_name":"Dörksen, Helene","id":"46416"},{"first_name":"Hans-Jürgen","last_name":"Danneel","full_name":"Danneel, Hans-Jürgen","id":"12231"},{"orcid":"0000-0002-3325-7887","last_name":"Lohweg","first_name":"Volker","full_name":"Lohweg, Volker","id":"1804"},{"first_name":"Michael","full_name":"Hübner, Michael","last_name":"Hübner"},{"last_name":"Schaede","first_name":"Johannes","full_name":"Schaede, Johannes","id":"2128"},{"first_name":"Rob","last_name":"Stierman","full_name":"Stierman, Rob"},{"first_name":"Alexander","full_name":"Knobloch, Alexander","last_name":"Knobloch"},{"first_name":"Dinh Khoi","last_name":"Le","full_name":"Le, Dinh Khoi"},{"last_name":"Gillich","full_name":"Gillich, Eugen","id":"1706","first_name":"Eugen"},{"full_name":"Mönks, Uwe","first_name":"Uwe","last_name":"Mönks","id":"1825"}],"year":"2020","main_file_link":[{"url":"https://opticaldigitalsecurity.com/downloads"}],"status":"public"},{"publication":"Optical Document Security (ODS)","type":"conference","date_created":"2019-11-22T12:51:12Z","user_id":"68554","date_updated":"2023-03-15T13:49:38Z","_id":"1992","place":"San Francisco, California","language":[{"iso":"eng"}],"title":"Intaglio Style Transfer – Partially Automating the Intaglio Image Creation","citation":{"ieee":"P. Meier, V. Lohweg, H. Dörksen, and J. Schaede, “Intaglio Style Transfer – Partially Automating the Intaglio Image Creation,” in Optical Document Security (ODS), 2020.","ama":"Meier P, Lohweg V, Dörksen H, Schaede J. Intaglio Style Transfer – Partially Automating the Intaglio Image Creation. In: Optical Document Security (ODS). San Francisco, California; 2020.","chicago":"Meier, Philip, Volker Lohweg, Helene Dörksen, and Johannes Schaede. “Intaglio Style Transfer – Partially Automating the Intaglio Image Creation.” In Optical Document Security (ODS). San Francisco, California, 2020.","apa":"Meier, P., Lohweg, V., Dörksen, H., & Schaede, J. (2020). Intaglio Style Transfer – Partially Automating the Intaglio Image Creation. In Optical Document Security (ODS). San Francisco, California.","ufg":"Meier, Philip et. al. (2020): Intaglio Style Transfer – Partially Automating the Intaglio Image Creation, in: Optical Document Security (ODS), San Francisco, California.","havard":"P. Meier, V. Lohweg, H. Dörksen, J. Schaede, Intaglio Style Transfer – Partially Automating the Intaglio Image Creation, in: Optical Document Security (ODS), San Francisco, California, 2020.","mla":"Meier, Philip, et al. “Intaglio Style Transfer – Partially Automating the Intaglio Image Creation.” Optical Document Security (ODS), 2020.","bjps":"Meier P et al. (2020) Intaglio Style Transfer – Partially Automating the Intaglio Image Creation. Optical Document Security (ODS). San Francisco, California.","van":"Meier P, Lohweg V, Dörksen H, Schaede J. Intaglio Style Transfer – Partially Automating the Intaglio Image Creation. In: Optical Document Security (ODS). San Francisco, California; 2020.","din1505-2-1":"Meier, Philip ; Lohweg, Volker ; Dörksen, Helene ; Schaede, Johannes: Intaglio Style Transfer – Partially Automating the Intaglio Image Creation. In: Optical Document Security (ODS). San Francisco, California, 2020","chicago-de":"Meier, Philip, Volker Lohweg, Helene Dörksen und Johannes Schaede. 2020. Intaglio Style Transfer – Partially Automating the Intaglio Image Creation. In: Optical Document Security (ODS). San Francisco, California.","short":"P. Meier, V. Lohweg, H. Dörksen, J. Schaede, in: Optical Document Security (ODS), San Francisco, California, 2020."},"author":[{"first_name":"Philip","id":"58460","full_name":"Meier, Philip","last_name":"Meier"},{"orcid":"0000-0002-3325-7887","full_name":"Lohweg, Volker","first_name":"Volker","id":"1804","last_name":"Lohweg"},{"last_name":"Dörksen","id":"46416","full_name":"Dörksen, Helene","first_name":"Helene"},{"id":"2128","first_name":"Johannes","full_name":"Schaede, Johannes","last_name":"Schaede"}],"year":2020,"department":[{"_id":"DEP5023"}],"status":"public"},{"language":[{"iso":"ger"}],"_id":"4028","user_id":"74004","date_updated":"2023-03-15T13:49:50Z","date_created":"2020-11-23T18:59:28Z","type":"conference","status":"public","year":2020,"author":[{"first_name":"S.","full_name":"Dörr, S.","last_name":"Dörr"},{"id":"46242","first_name":"Thomas","full_name":"Schulte, Thomas","last_name":"Schulte"}],"department":[{"_id":"DEP6020"}],"conference":{"name":"11. Int. AVL Forum Abgas- und Partikelemissionen. Order proceedings","location":"Ludwigsburg"},"abstract":[{"text":"Es wird allgemein erwartet, dass die Mobilität in Zukunft aufgrund des Klimawandels und der Ressourcenknappheit unabhängiger von fossilen Brennstoffen sein muss. Eine vernünftige Änderung der Mobilität würde jedoch ein Konzept erfordern, das den Ursprung der Antriebsenergie (z. B. Kraftstoffe) sowie ein geeignetes Konzept für die Übergangszeit des technologischen Wandels berücksichtigt. Die Forschungsaktivitäten sollten für jede technologische Option offen sein. In diesem Beitrag wird die geeignete Auswahl der Antriebskonzepte und Energieträger für Busse im öffentlichen Verkehr diskutiert und ein umfassendes Forschungsprojekt mit einer Modellregion und einem virtuellen Institut skizziert.","lang":"eng"}],"citation":{"ama":"Dörr S, Schulte T. Auswahl von Antriebskonzepten und Energieträgern für eine nachhaltige Mobilität am Beispiel des öffentlichen Verkehrs. In: ; 2020.","ieee":"S. Dörr and T. Schulte, “Auswahl von Antriebskonzepten und Energieträgern für eine nachhaltige Mobilität am Beispiel des öffentlichen Verkehrs,” presented at the 11. Int. AVL Forum Abgas- und Partikelemissionen. Order proceedings, Ludwigsburg, 2020.","van":"Dörr S, Schulte T. Auswahl von Antriebskonzepten und Energieträgern für eine nachhaltige Mobilität am Beispiel des öffentlichen Verkehrs. In 2020.","ufg":"Dörr, S./Schulte, Thomas (2020): Auswahl von Antriebskonzepten und Energieträgern für eine nachhaltige Mobilität am Beispiel des öffentlichen Verkehrs, in: .","mla":"Dörr, S., and Thomas Schulte. Auswahl von Antriebskonzepten und Energieträgern für eine nachhaltige Mobilität am Beispiel des öffentlichen Verkehrs. 2020.","bjps":"Dörr S and Schulte T (2020) Auswahl von Antriebskonzepten und Energieträgern für eine nachhaltige Mobilität am Beispiel des öffentlichen Verkehrs.","havard":"S. Dörr, T. Schulte, Auswahl von Antriebskonzepten und Energieträgern für eine nachhaltige Mobilität am Beispiel des öffentlichen Verkehrs, in: 2020.","apa":"Dörr, S., & Schulte, T. (2020). Auswahl von Antriebskonzepten und Energieträgern für eine nachhaltige Mobilität am Beispiel des öffentlichen Verkehrs. Presented at the 11. Int. AVL Forum Abgas- und Partikelemissionen. Order proceedings, Ludwigsburg.","chicago":"Dörr, S., and Thomas Schulte. “Auswahl von Antriebskonzepten und Energieträgern für eine nachhaltige Mobilität am Beispiel des öffentlichen Verkehrs,” 2020.","short":"S. Dörr, T. Schulte, in: 2020.","chicago-de":"Dörr, S. und Thomas Schulte. 2020. Auswahl von Antriebskonzepten und Energieträgern für eine nachhaltige Mobilität am Beispiel des öffentlichen Verkehrs. In: .","din1505-2-1":"Dörr, S. ; Schulte, Thomas: Auswahl von Antriebskonzepten und Energieträgern für eine nachhaltige Mobilität am Beispiel des öffentlichen Verkehrs. In: , 2020"},"title":"Auswahl von Antriebskonzepten und Energieträgern für eine nachhaltige Mobilität am Beispiel des öffentlichen Verkehrs"},{"conference":{"name":"Mensch und Computer 2020","location":"Magdeburg ","end_date":"2020-09-09","start_date":"2020-09-06"},"department":[{"_id":"DEP5023"}],"year":2020,"author":[{"full_name":"Hoffmann, Clemens","last_name":"Hoffmann","first_name":"Clemens"},{"full_name":"Büttner, Sebastian","last_name":"Büttner","id":"61868","first_name":"Sebastian"},{"last_name":"Wundram","first_name":"Kai","full_name":"Wundram, Kai"},{"full_name":"Prilla, Michael","first_name":"Michael","last_name":"Prilla"}],"abstract":[{"lang":"eng","text":"The use of augmented reality (AR) guidance is seen as an opportunity to address the growing complexity of industrial tasks. Previous research showed benefits of AR for different industrial tasks especially for novice users, while other research suggests that AR was not superior to other means for novices. However, there is not much work that looks at the relation between initial exposure of users to AR (that is, if users have never used AR before) and different types of tasks. In this paper, addressing the field of car maintenance and repair, we look into the question of how AR support impacts the performance in familiar and unfamiliar task if the AR user has never used AR before. By running an experiment under field conditions, we investigate whether the familiarity of a specific repair task has an impact on the performance under AR guidance compared to a traditional repair guideline. Our experiment reveals interesting insights. First, we show that familiarity and routine have an important impact on adherence to (all) repair guidelines, which should be regarded in future studies. Second, despite its novelty and the corresponding added time to deal with AR, we found that guidance via AR worked better for unfamiliar tasks. This shows the potential of AR for guidance of industrial tasks in practice, and it brings up design suggestions for the implementation of this guidance in practice."}],"page":"279-289","status":"public","publisher":"Gesellschaft für Informatik e.V.","title":"Impact of Augmented Reality Guidance for Car Repairs on Novice Users of AR – A Field Experiment on Familiar and Unfamiliar Tasks","publication_status":"published","citation":{"ieee":"C. Hoffmann, S. Büttner, K. Wundram, and M. Prilla, “Impact of Augmented Reality Guidance for Car Repairs on Novice Users of AR – A Field Experiment on Familiar and Unfamiliar Tasks,” in Mensch und Computer 2020, Magdeburg , 2020, pp. 279–289.","ama":"Hoffmann C, Büttner S, Wundram K, Prilla M. Impact of Augmented Reality Guidance for Car Repairs on Novice Users of AR – A Field Experiment on Familiar and Unfamiliar Tasks. In: Mensch Und Computer 2020. Bonn: Gesellschaft für Informatik e.V.; 2020:279-289. doi: 10.1145/3404983.3405594","apa":"Hoffmann, C., Büttner, S., Wundram, K., & Prilla, M. (2020). Impact of Augmented Reality Guidance for Car Repairs on Novice Users of AR – A Field Experiment on Familiar and Unfamiliar Tasks. In Mensch und Computer 2020 (pp. 279–289). Bonn: Gesellschaft für Informatik e.V. https://doi.org/ 10.1145/3404983.3405594","chicago":"Hoffmann, Clemens, Sebastian Büttner, Kai Wundram, and Michael Prilla. “Impact of Augmented Reality Guidance for Car Repairs on Novice Users of AR – A Field Experiment on Familiar and Unfamiliar Tasks.” In Mensch Und Computer 2020, 279–89. Bonn: Gesellschaft für Informatik e.V., 2020. https://doi.org/ 10.1145/3404983.3405594.","van":"Hoffmann C, Büttner S, Wundram K, Prilla M. Impact of Augmented Reality Guidance for Car Repairs on Novice Users of AR – A Field Experiment on Familiar and Unfamiliar Tasks. In: Mensch und Computer 2020. Bonn: Gesellschaft für Informatik e.V.; 2020. p. 279–89.","bjps":"Hoffmann C et al. (2020) Impact of Augmented Reality Guidance for Car Repairs on Novice Users of AR – A Field Experiment on Familiar and Unfamiliar Tasks. Mensch Und Computer 2020. Bonn: Gesellschaft für Informatik e.V., pp. 279–289.","mla":"Hoffmann, Clemens, et al. “Impact of Augmented Reality Guidance for Car Repairs on Novice Users of AR – A Field Experiment on Familiar and Unfamiliar Tasks.” Mensch Und Computer 2020, Gesellschaft für Informatik e.V., 2020, pp. 279–89, doi: 10.1145/3404983.3405594.","havard":"C. Hoffmann, S. Büttner, K. Wundram, M. Prilla, Impact of Augmented Reality Guidance for Car Repairs on Novice Users of AR – A Field Experiment on Familiar and Unfamiliar Tasks, in: Mensch Und Computer 2020, Gesellschaft für Informatik e.V., Bonn, 2020: pp. 279–289.","ufg":"Hoffmann, Clemens et. al. (2020): Impact of Augmented Reality Guidance for Car Repairs on Novice Users of AR – A Field Experiment on Familiar and Unfamiliar Tasks, in: Mensch und Computer 2020, Bonn, S. 279–289.","short":"C. Hoffmann, S. Büttner, K. Wundram, M. Prilla, in: Mensch Und Computer 2020, Gesellschaft für Informatik e.V., Bonn, 2020, pp. 279–289.","din1505-2-1":"Hoffmann, Clemens ; Büttner, Sebastian ; Wundram, Kai ; Prilla, Michael: Impact of Augmented Reality Guidance for Car Repairs on Novice Users of AR – A Field Experiment on Familiar and Unfamiliar Tasks. In: Mensch und Computer 2020. Bonn : Gesellschaft für Informatik e.V., 2020, S. 279–289","chicago-de":"Hoffmann, Clemens, Sebastian Büttner, Kai Wundram und Michael Prilla. 2020. Impact of Augmented Reality Guidance for Car Repairs on Novice Users of AR – A Field Experiment on Familiar and Unfamiliar Tasks. In: Mensch und Computer 2020, 279–289. Bonn: Gesellschaft für Informatik e.V. doi: 10.1145/3404983.3405594, ."},"language":[{"iso":"eng"}],"place":"Bonn","doi":" 10.1145/3404983.3405594","_id":"4092","type":"conference","date_created":"2020-11-26T13:53:24Z","publication":"Mensch und Computer 2020","date_updated":"2023-03-15T13:49:50Z","user_id":"15514"},{"abstract":[{"lang":"ger","text":"Im Kontext von Industrie 4.0 werden gegenwärtig Möglichkeiten intelligenter Assistenzsysteme diskutiert, deren Einsatz große Chancen zur Steigerung der Produktivität manueller Tätigkeiten bedeuten könnte. Während diese Systeme große Chancen für die Unternehmen bieten, bedeuten sie für Arbeitnehmer*innen auch eine potenzielle Kontrolle und Überwachung. In diesem Positionsbeitrag wollen wir daher für eine partizipative Gestaltung solcher Systeme plädieren. Der vorliegende Beitrag beschreibt zunächst die Zusammenarbeit von Assistenzsystemen und Beschäftigten im industriellen Umfeld. Anschließend wird die Kontrolle und Überwachung von Mitarbeiter*innen betrachtet, zunächst im historischen Kontext, dann im aktuellen. Es wird aufgezeigt inwieweit Beschäftigte durch Assistenzsysteme überwacht beziehungsweise kontrolliert werden können. Im Spannungsfeld zwischen Effizienzsteigerung und Arbeitnehmer*innen-Interessen plädieren wir für die Einbeziehung von System-Nutzer*innen sowie weiteren Interessensvertretungen, wie z. B. Gewerkschaften, in den Entwicklungsprozess, damit ein ethisch vertretbarer Einsatz von Assistenzsystemen gelingen kann."}],"author":[{"full_name":"Pitz, Nina","first_name":"Nina","last_name":"Pitz","id":"74474"},{"last_name":"Büttner","first_name":"Sebastian","full_name":"Büttner, Sebastian","id":"61868"},{"first_name":"Carsten","full_name":"Röcker, Carsten","id":"61525","last_name":"Röcker"}],"year":2020,"department":[{"_id":"DEP5023"}],"conference":{"location":"Magdeburg","name":"Mensch und Computer 2020 ","start_date":"2020-09-06","end_date":"2020-09-09"},"publisher":"Gesellschaft für Informatik e.V.","status":"public","title":"Assistenzsysteme im Kontext von Industrie 4.0–Partizipative Technologiegestaltung zur Wahrung der Arbeitnehmer*innen-Interessen","citation":{"ieee":"N. Pitz, S. Büttner, and C. Röcker, “Assistenzsysteme im Kontext von Industrie 4.0–Partizipative Technologiegestaltung zur Wahrung der Arbeitnehmer*innen-Interessen,” in Mensch und Computer 2020 Workshopband, Magdeburg, 2020.","ama":"Pitz N, Büttner S, Röcker C. Assistenzsysteme im Kontext von Industrie 4.0–Partizipative Technologiegestaltung zur Wahrung der Arbeitnehmer*innen-Interessen. In: Gesellschaft für Informatik e.V., ed. Mensch Und Computer 2020 Workshopband. Bonn: Gesellschaft für Informatik e.V.; 2020. doi: 10.18420/muc2020-ws109-275","din1505-2-1":"Pitz, Nina ; Büttner, Sebastian ; Röcker, Carsten: Assistenzsysteme im Kontext von Industrie 4.0–Partizipative Technologiegestaltung zur Wahrung der Arbeitnehmer*innen-Interessen. In: Gesellschaft für Informatik e.V. (Hrsg.): Mensch und Computer 2020 Workshopband. Bonn : Gesellschaft für Informatik e.V., 2020","chicago-de":"Pitz, Nina, Sebastian Büttner und Carsten Röcker. 2020. Assistenzsysteme im Kontext von Industrie 4.0–Partizipative Technologiegestaltung zur Wahrung der Arbeitnehmer*innen-Interessen. In: Mensch und Computer 2020 Workshopband, hg. von Gesellschaft für Informatik e.V. Bonn: Gesellschaft für Informatik e.V. doi: 10.18420/muc2020-ws109-275, .","short":"N. Pitz, S. Büttner, C. Röcker, in: Gesellschaft für Informatik e.V. (Ed.), Mensch Und Computer 2020 Workshopband, Gesellschaft für Informatik e.V., Bonn, 2020.","chicago":"Pitz, Nina, Sebastian Büttner, and Carsten Röcker. “Assistenzsysteme Im Kontext von Industrie 4.0–Partizipative Technologiegestaltung Zur Wahrung Der Arbeitnehmer*innen-Interessen.” In Mensch Und Computer 2020 Workshopband, edited by Gesellschaft für Informatik e.V. Bonn: Gesellschaft für Informatik e.V., 2020. https://doi.org/ 10.18420/muc2020-ws109-275.","apa":"Pitz, N., Büttner, S., & Röcker, C. (2020). Assistenzsysteme im Kontext von Industrie 4.0–Partizipative Technologiegestaltung zur Wahrung der Arbeitnehmer*innen-Interessen. In Gesellschaft für Informatik e.V. (Ed.), Mensch und Computer 2020 Workshopband. Bonn: Gesellschaft für Informatik e.V. https://doi.org/ 10.18420/muc2020-ws109-275","havard":"N. Pitz, S. Büttner, C. Röcker, Assistenzsysteme im Kontext von Industrie 4.0–Partizipative Technologiegestaltung zur Wahrung der Arbeitnehmer*innen-Interessen, in: Gesellschaft für Informatik e.V. (Ed.), Mensch Und Computer 2020 Workshopband, Gesellschaft für Informatik e.V., Bonn, 2020.","mla":"Pitz, Nina, et al. “Assistenzsysteme Im Kontext von Industrie 4.0–Partizipative Technologiegestaltung Zur Wahrung Der Arbeitnehmer*innen-Interessen.” Mensch Und Computer 2020 Workshopband, edited by Gesellschaft für Informatik e.V., Gesellschaft für Informatik e.V., 2020, doi: 10.18420/muc2020-ws109-275.","bjps":"Pitz N, Büttner S and Röcker C (2020) Assistenzsysteme Im Kontext von Industrie 4.0–Partizipative Technologiegestaltung Zur Wahrung Der Arbeitnehmer*innen-Interessen. In Gesellschaft für Informatik e.V. (ed.), Mensch Und Computer 2020 Workshopband. Bonn: Gesellschaft für Informatik e.V.","ufg":"Pitz, Nina et. al. (2020): Assistenzsysteme im Kontext von Industrie 4.0–Partizipative Technologiegestaltung zur Wahrung der Arbeitnehmer*innen-Interessen, in: Gesellschaft für Informatik e.V. (Hg.): Mensch und Computer 2020 Workshopband, Bonn.","van":"Pitz N, Büttner S, Röcker C. Assistenzsysteme im Kontext von Industrie 4.0–Partizipative Technologiegestaltung zur Wahrung der Arbeitnehmer*innen-Interessen. In: Gesellschaft für Informatik e.V., editor. Mensch und Computer 2020 Workshopband. Bonn: Gesellschaft für Informatik e.V.; 2020."},"publication_status":"published","_id":"4093","doi":" 10.18420/muc2020-ws109-275","place":"Bonn","keyword":["Assistenzsystem","Digitalisierung","Industrie 4.0","Partizipative Gestaltung","Ethik"],"language":[{"iso":"eng"}],"publication":"Mensch und Computer 2020 Workshopband","type":"conference","date_created":"2020-11-26T13:53:25Z","corporate_editor":["Gesellschaft für Informatik e.V."],"user_id":"15514","date_updated":"2023-03-15T13:49:50Z"},{"series_title":"Lecture Notes in Computer Science","publication_status":"published","abstract":[{"lang":"eng","text":"Projection-based assitive systems that guide users through assembly work are on their way to industrial application. Previous research work investigated how people can be supported with such systems. However, there has been little work on the question on how to generate and author sequential instructions for assitive systems. In this paper, we present a new concept and a prototypical implementation of an assitive system that can be taught by demonstrating an assembly process. By using a combination of RGB and depth cameras, we can generate an assembly instruction of Lego Duplo bricks based on the demonstration of a user. This generated manual can later on be used for assisting other users in the assembly process. By our prototype system, we show the technological feasibility of assistive systems that can learn from users."}],"department":[{"_id":"DEP5023"}],"conference":{"end_date":"2020-07-24","start_date":"2020-07-19","location":"Copenhagen, Denmark","name":"22nd International Conference on Human-Computer Interaction"},"publisher":"Springer","type":"conference","intvolume":" 12203","user_id":"83781","doi":"https://doi.org/10.1007/978-3-030-50344-4_12","_id":"4094","place":"Berlin","title":"Teaching by Demonstrating – How Smart Assistive Systems Can Learn from Users","volume":12203,"citation":{"ama":"Büttner S, Peda A, Heinz M, Röcker C. Teaching by Demonstrating – How Smart Assistive Systems Can Learn from Users. In: 22nd International Conference on Human-Computer Interaction. Vol 12203. Lecture Notes in Computer Science. Springer; 2020:153-163. doi:https://doi.org/10.1007/978-3-030-50344-4_12","ieee":"S. Büttner, A. Peda, M. Heinz, and C. Röcker, “Teaching by Demonstrating – How Smart Assistive Systems Can Learn from Users,” in 22nd International Conference on Human-Computer Interaction, Copenhagen, Denmark, 2020, vol. 12203, pp. 153–163. doi: https://doi.org/10.1007/978-3-030-50344-4_12.","ufg":"Büttner, Sebastian u. a.: Teaching by Demonstrating – How Smart Assistive Systems Can Learn from Users, in: o. Hg.: 22nd International Conference on Human-Computer Interaction, Bd. 12203, Berlin 2020 (Lecture Notes in Computer Science), S. 153–163.","bjps":"Büttner S et al. (2020) Teaching by Demonstrating – How Smart Assistive Systems Can Learn from Users. 22nd International Conference on Human-Computer Interaction, vol. 12203. Berlin: Springer, pp. 153–163.","mla":"Büttner, Sebastian, et al. “Teaching by Demonstrating – How Smart Assistive Systems Can Learn from Users.” 22nd International Conference on Human-Computer Interaction, vol. 12203, Springer, 2020, pp. 153–63, https://doi.org/10.1007/978-3-030-50344-4_12.","havard":"S. Büttner, A. Peda, M. Heinz, C. Röcker, Teaching by Demonstrating – How Smart Assistive Systems Can Learn from Users, in: 22nd International Conference on Human-Computer Interaction, Springer, Berlin, 2020: pp. 153–163.","van":"Büttner S, Peda A, Heinz M, Röcker C. Teaching by Demonstrating – How Smart Assistive Systems Can Learn from Users. In: 22nd International Conference on Human-Computer Interaction. Berlin: Springer; 2020. p. 153–63. (Lecture Notes in Computer Science; vol. 12203).","chicago":"Büttner, Sebastian, Andreas Peda, Mario Heinz, and Carsten Röcker. “Teaching by Demonstrating – How Smart Assistive Systems Can Learn from Users.” In 22nd International Conference on Human-Computer Interaction, 12203:153–63. Lecture Notes in Computer Science. Berlin: Springer, 2020. https://doi.org/10.1007/978-3-030-50344-4_12.","apa":"Büttner, S., Peda, A., Heinz, M., & Röcker, C. (2020). Teaching by Demonstrating – How Smart Assistive Systems Can Learn from Users. 22nd International Conference on Human-Computer Interaction, 12203, 153–163. https://doi.org/10.1007/978-3-030-50344-4_12","din1505-2-1":"Büttner, Sebastian ; Peda, Andreas ; Heinz, Mario ; Röcker, Carsten: Teaching by Demonstrating – How Smart Assistive Systems Can Learn from Users. In: 22nd International Conference on Human-Computer Interaction, Lecture Notes in Computer Science. Bd. 12203. Berlin : Springer, 2020, S. 153–163","chicago-de":"Büttner, Sebastian, Andreas Peda, Mario Heinz und Carsten Röcker. 2020. Teaching by Demonstrating – How Smart Assistive Systems Can Learn from Users. In: 22nd International Conference on Human-Computer Interaction, 12203:153–163. Lecture Notes in Computer Science. Berlin: Springer. doi:https://doi.org/10.1007/978-3-030-50344-4_12, .","short":"S. Büttner, A. Peda, M. Heinz, C. Röcker, in: 22nd International Conference on Human-Computer Interaction, Springer, Berlin, 2020, pp. 153–163."},"main_file_link":[{"open_access":"1","url":"https://link.springer.com/chapter/10.1007/978-3-030-50344-4_12"}],"author":[{"id":"61868","last_name":"Büttner","full_name":"Büttner, Sebastian","first_name":"Sebastian"},{"first_name":"Andreas","last_name":"Peda","full_name":"Peda, Andreas","id":"51144"},{"id":"68913","last_name":"Heinz","full_name":"Heinz, Mario","first_name":"Mario"},{"first_name":"Carsten","last_name":"Röcker","full_name":"Röcker, Carsten","id":"61525"}],"year":"2020","page":"153-163","status":"public","date_created":"2020-11-26T14:10:00Z","publication_identifier":{"eisbn":["978-3-030-50344-4"],"isbn":["978-3-030-50343-7"]},"publication":"22nd International Conference on Human-Computer Interaction","date_updated":"2025-06-26T08:59:53Z","oa":"1","language":[{"iso":"eng"}],"keyword":["Assitive system","Authoring","Instruction generation","Computer vision","Teaching by demonstration"]},{"oa":"1","keyword":["Human-Drone Interaction","Unmanned Aerial Vehicle","3-D mouse","Spatial mapping","Prototyping"],"language":[{"iso":"eng"}],"publication":"22nd International Conference on Human-Computer Interaction","publication_identifier":{"isbn":["978-3-030-49061-4"],"eisbn":["978-3-030-49062-1"]},"date_created":"2020-11-26T14:10:02Z","date_updated":"2025-06-26T08:59:16Z","main_file_link":[{"url":"https://link.springer.com/chapter/10.1007/978-3-030-49062-1_36","open_access":"1"}],"year":"2020","author":[{"id":"61868","last_name":"Büttner","full_name":"Büttner, Sebastian","first_name":"Sebastian"},{"last_name":"Zaitoon","full_name":"Zaitoon, Rami","first_name":"Rami","id":"62713"},{"full_name":"Heinz, Mario","first_name":"Mario","last_name":"Heinz","id":"68913"},{"first_name":"Carsten","last_name":"Röcker","full_name":"Röcker, Carsten","id":"61525"}],"status":"public","page":" 535-548","title":"One-hand Controller for Human-Drone Interaction – a Human-centered Prototype Development","volume":12203,"citation":{"ieee":"S. Büttner, R. Zaitoon, M. Heinz, and C. Röcker, “One-hand Controller for Human-Drone Interaction – a Human-centered Prototype Development,” in 22nd International Conference on Human-Computer Interaction, Copenhagen, Denmark, 2020, vol. 12203, pp. 535–548. doi: https://doi.org/10.1007/978-3-030-49062-1_36.","ama":"Büttner S, Zaitoon R, Heinz M, Röcker C. One-hand Controller for Human-Drone Interaction – a Human-centered Prototype Development. In: 22nd International Conference on Human-Computer Interaction. Vol 12203. Lecture Notes in Computer Science. Springer; 2020:535-548. doi:https://doi.org/10.1007/978-3-030-49062-1_36","short":"S. Büttner, R. Zaitoon, M. Heinz, C. Röcker, in: 22nd International Conference on Human-Computer Interaction, Springer, Berlin, 2020, pp. 535–548.","chicago-de":"Büttner, Sebastian, Rami Zaitoon, Mario Heinz und Carsten Röcker. 2020. One-hand Controller for Human-Drone Interaction – a Human-centered Prototype Development. In: 22nd International Conference on Human-Computer Interaction, 12203:535–548. Lecture Notes in Computer Science. Berlin: Springer. doi:https://doi.org/10.1007/978-3-030-49062-1_36, .","din1505-2-1":"Büttner, Sebastian ; Zaitoon, Rami ; Heinz, Mario ; Röcker, Carsten: One-hand Controller for Human-Drone Interaction – a Human-centered Prototype Development. In: 22nd International Conference on Human-Computer Interaction, Lecture Notes in Computer Science. Bd. 12203. Berlin : Springer, 2020, S. 535–548","apa":"Büttner, S., Zaitoon, R., Heinz, M., & Röcker, C. (2020). One-hand Controller for Human-Drone Interaction – a Human-centered Prototype Development. 22nd International Conference on Human-Computer Interaction, 12203, 535–548. https://doi.org/10.1007/978-3-030-49062-1_36","chicago":"Büttner, Sebastian, Rami Zaitoon, Mario Heinz, and Carsten Röcker. “One-Hand Controller for Human-Drone Interaction – a Human-Centered Prototype Development.” In 22nd International Conference on Human-Computer Interaction, 12203:535–48. Lecture Notes in Computer Science. Berlin: Springer, 2020. https://doi.org/10.1007/978-3-030-49062-1_36.","van":"Büttner S, Zaitoon R, Heinz M, Röcker C. One-hand Controller for Human-Drone Interaction – a Human-centered Prototype Development. In: 22nd International Conference on Human-Computer Interaction. Berlin: Springer; 2020. p. 535–48. (Lecture Notes in Computer Science; vol. 12203).","ufg":"Büttner, Sebastian u. a.: One-hand Controller for Human-Drone Interaction – a Human-centered Prototype Development, in: o. Hg.: 22nd International Conference on Human-Computer Interaction, Bd. 12203, Berlin 2020 (Lecture Notes in Computer Science), S. 535–548.","bjps":"Büttner S et al. (2020) One-Hand Controller for Human-Drone Interaction – a Human-Centered Prototype Development. 22nd International Conference on Human-Computer Interaction, vol. 12203. Berlin: Springer, pp. 535–548.","havard":"S. Büttner, R. Zaitoon, M. Heinz, C. Röcker, One-hand Controller for Human-Drone Interaction – a Human-centered Prototype Development, in: 22nd International Conference on Human-Computer Interaction, Springer, Berlin, 2020: pp. 535–548.","mla":"Büttner, Sebastian, et al. “One-Hand Controller for Human-Drone Interaction – a Human-Centered Prototype Development.” 22nd International Conference on Human-Computer Interaction, vol. 12203, Springer, 2020, pp. 535–48, https://doi.org/10.1007/978-3-030-49062-1_36."},"_id":"4095","doi":"https://doi.org/10.1007/978-3-030-49062-1_36","place":"Berlin","type":"conference","intvolume":" 12203","user_id":"83781","abstract":[{"text":"Using remote control transmitters is a common way to control a drone. For the future, we envision drones that are intuitively controllable with new input devices. One possibility could be the use of one-hand controllers. Here, we present an exploration of using a 3-D mouse as a controller for human-drone interaction. We ran a pre-study that investigated the users’ natural spatial mapping between controller and drone dimensions. Based on these results we developed our prototype that shows the feasibility of our concept. A series of flight tests were conducted and the mapping between controller and flight movements were iteratively improved. In this paper, we present our development process and the implementation of our prototype.","lang":"eng"}],"conference":{"location":"Copenhagen, Denmark","name":"22nd International Conference on Human-Computer Interaction","start_date":"2020-07-19","end_date":"2020-07-24"},"department":[{"_id":"DEP5023"}],"publisher":"Springer","series_title":"Lecture Notes in Computer Science","publication_status":"published"},{"user_id":"83781","intvolume":" 12203","type":"conference","place":"Berlin","doi":"https://doi.org/10.1007/978-3-030-50344-4_19","_id":"4096","publication_status":"published","series_title":"Lecture Notes in Computer Science","publisher":"Springer","department":[{"_id":"DEP5023"}],"conference":{"end_date":"2020-07-24","start_date":"2020-07-19","location":"Copenhagen, Denmark","name":"22nd International Conference on Human-Computer Interaction"},"abstract":[{"lang":"eng","text":"Projection-based assistive systems have shown to be a promising technology to support workers during manual assembly processes in industrial manufacturing by projecting instructions into the working area. While existing studies have investigated various aspects of these systems, little research has been conducted regarding the way in which the user accesses the provided instructions. In this paper we analyze the eye movements of users during the repeated execution of an assembly task at a projection-based assistive system in order to gain insights into the utilization of the presented instructions. For this purpose, we analyzed eye tracking recordings from a user study with 15 participants to investigate the sequences in which the respective instructions are observed by the users. The results show a significantly lower number of nonlinear gaze sequences as well as a significantly higher number of steps without observing the instructions during the repeated use of the assistive system. In addition, there was a significantly lower task completion time during repeated use of the assistive system."}],"date_updated":"2025-06-26T08:59:34Z","date_created":"2020-11-26T14:10:03Z","publication_identifier":{"eisbn":["978-3-030-50344-4"],"isbn":["978-3-030-50343-7"]},"publication":"22nd International Conference on Human-Computer Interaction","language":[{"iso":"eng"}],"keyword":["Assistive systems","Eye tracking","Human behavior"],"oa":"1","citation":{"ama":"Heinz M, Büttner S, Röcker C. Exploring Users’ Eye Movements When Using Projection-based Assembly Assistive Systems. In: 22nd International Conference on Human-Computer Interaction. Vol 12203. Lecture Notes in Computer Science. Springer; 2020:259-272. doi:https://doi.org/10.1007/978-3-030-50344-4_19","ieee":"M. Heinz, S. Büttner, and C. Röcker, “Exploring Users’ Eye Movements When Using Projection-based Assembly Assistive Systems,” in 22nd International Conference on Human-Computer Interaction, Copenhagen, Denmark, 2020, vol. 12203, pp. 259–272. doi: https://doi.org/10.1007/978-3-030-50344-4_19.","din1505-2-1":"Heinz, Mario ; Büttner, Sebastian ; Röcker, Carsten: Exploring Users’ Eye Movements When Using Projection-based Assembly Assistive Systems. In: 22nd International Conference on Human-Computer Interaction, Lecture Notes in Computer Science. Bd. 12203. Berlin : Springer, 2020, S. 259–272","chicago-de":"Heinz, Mario, Sebastian Büttner und Carsten Röcker. 2020. Exploring Users’ Eye Movements When Using Projection-based Assembly Assistive Systems. In: 22nd International Conference on Human-Computer Interaction, 12203:259–272. Lecture Notes in Computer Science. Berlin: Springer. doi:https://doi.org/10.1007/978-3-030-50344-4_19, .","short":"M. Heinz, S. Büttner, C. Röcker, in: 22nd International Conference on Human-Computer Interaction, Springer, Berlin, 2020, pp. 259–272.","havard":"M. Heinz, S. Büttner, C. Röcker, Exploring Users’ Eye Movements When Using Projection-based Assembly Assistive Systems, in: 22nd International Conference on Human-Computer Interaction, Springer, Berlin, 2020: pp. 259–272.","bjps":"Heinz M, Büttner S and Röcker C (2020) Exploring Users’ Eye Movements When Using Projection-Based Assembly Assistive Systems. 22nd International Conference on Human-Computer Interaction, vol. 12203. Berlin: Springer, pp. 259–272.","mla":"Heinz, Mario, et al. “Exploring Users’ Eye Movements When Using Projection-Based Assembly Assistive Systems.” 22nd International Conference on Human-Computer Interaction, vol. 12203, Springer, 2020, pp. 259–72, https://doi.org/10.1007/978-3-030-50344-4_19.","ufg":"Heinz, Mario/Büttner, Sebastian/Röcker, Carsten: Exploring Users’ Eye Movements When Using Projection-based Assembly Assistive Systems, in: o. Hg.: 22nd International Conference on Human-Computer Interaction, Bd. 12203, Berlin 2020 (Lecture Notes in Computer Science), S. 259–272.","van":"Heinz M, Büttner S, Röcker C. Exploring Users’ Eye Movements When Using Projection-based Assembly Assistive Systems. In: 22nd International Conference on Human-Computer Interaction. Berlin: Springer; 2020. p. 259–72. (Lecture Notes in Computer Science; vol. 12203).","chicago":"Heinz, Mario, Sebastian Büttner, and Carsten Röcker. “Exploring Users’ Eye Movements When Using Projection-Based Assembly Assistive Systems.” In 22nd International Conference on Human-Computer Interaction, 12203:259–72. Lecture Notes in Computer Science. Berlin: Springer, 2020. https://doi.org/10.1007/978-3-030-50344-4_19.","apa":"Heinz, M., Büttner, S., & Röcker, C. (2020). Exploring Users’ Eye Movements When Using Projection-based Assembly Assistive Systems. 22nd International Conference on Human-Computer Interaction, 12203, 259–272. https://doi.org/10.1007/978-3-030-50344-4_19"},"volume":12203,"title":"Exploring Users' Eye Movements When Using Projection-based Assembly Assistive Systems","page":"259-272","status":"public","year":"2020","main_file_link":[{"open_access":"1","url":"https://link.springer.com/chapter/10.1007/978-3-030-50344-4_19"}],"author":[{"last_name":"Heinz","id":"68913","full_name":"Heinz, Mario","first_name":"Mario"},{"first_name":"Sebastian","last_name":"Büttner","id":"61868","full_name":"Büttner, Sebastian"},{"first_name":"Carsten","last_name":"Röcker","full_name":"Röcker, Carsten","id":"61525"}]},{"place":"Berlin","_id":"4097","doi":"https://doi.org/10.1007/978-3-030-50344-4_14","type":"conference","user_id":"83781","intvolume":" 12203","conference":{"name":"22nd International Conference on Human-Computer Interaction","location":"Copenhagen, Denmark","start_date":"2020-07-19","end_date":"2020-07-24"},"department":[{"_id":"DEP5023"}],"abstract":[{"lang":"eng","text":"The capabilities of object detection are well known, but many projects don’t use them, despite potential benefit. Even though the use of object detection algorithms is facilitated through frameworks and publications, a big issue is the creation of the necessary training data. To tackle this issue, this work shows the design and evaluation of a prototype, which allows users to create synthetic datasets for object detection in images. The prototype is evaluated using YOLOv3 as the underlying detector and shows that the generated datasets are equally good in quality as manually created data. This encourages a wide adoption of object detection algorithms in different areas, since image creation and labeling is often the most time consuming step."}],"publisher":"Springer","series_title":"Lecture Notes in Computer Science ","publication_status":"published","oa":"1","keyword":["Object detection","Synthetic datasets","Machine learning","Deep learning"],"language":[{"iso":"eng"}],"publication_identifier":{"isbn":["978-3-030-50343-7"],"eisbn":["978-3-030-50344-4"]},"publication":"22nd International Conference on Human-Computer Interaction","date_created":"2020-11-26T14:10:04Z","date_updated":"2025-06-26T13:28:35Z","main_file_link":[{"open_access":"1","url":"https://link.springer.com/chapter/10.1007/978-3-030-50344-4_14"}],"author":[{"last_name":"Besginow","full_name":"Besginow, Andreas","id":"61743","first_name":"Andreas"},{"id":"61868","first_name":"Sebastian","full_name":"Büttner, Sebastian","last_name":"Büttner"},{"id":"61525","full_name":"Röcker, Carsten","first_name":"Carsten","last_name":"Röcker"}],"year":"2020","status":"public","page":"178-192","title":"Making Object Detection Available to Everyone - A Hardware Prototype for Semi-automatic Synthetic Data Generation","volume":12203,"citation":{"ama":"Besginow A, Büttner S, Röcker C. Making Object Detection Available to Everyone - A Hardware Prototype for Semi-automatic Synthetic Data Generation. In: 22nd International Conference on Human-Computer Interaction. Vol 12203. Lecture Notes in Computer Science . Springer; 2020:178-192. doi:https://doi.org/10.1007/978-3-030-50344-4_14","ieee":"A. Besginow, S. Büttner, and C. Röcker, “Making Object Detection Available to Everyone - A Hardware Prototype for Semi-automatic Synthetic Data Generation,” in 22nd International Conference on Human-Computer Interaction, Copenhagen, Denmark, 2020, vol. 12203, pp. 178–192. doi: https://doi.org/10.1007/978-3-030-50344-4_14.","din1505-2-1":"Besginow, Andreas ; Büttner, Sebastian ; Röcker, Carsten: Making Object Detection Available to Everyone - A Hardware Prototype for Semi-automatic Synthetic Data Generation. In: 22nd International Conference on Human-Computer Interaction, Lecture Notes in Computer Science . Bd. 12203. Berlin : Springer, 2020, S. 178–192","chicago-de":"Besginow, Andreas, Sebastian Büttner und Carsten Röcker. 2020. Making Object Detection Available to Everyone - A Hardware Prototype for Semi-automatic Synthetic Data Generation. In: 22nd International Conference on Human-Computer Interaction, 12203:178–192. Lecture Notes in Computer Science . Berlin: Springer. doi:https://doi.org/10.1007/978-3-030-50344-4_14, .","short":"A. Besginow, S. Büttner, C. Röcker, in: 22nd International Conference on Human-Computer Interaction, Springer, Berlin, 2020, pp. 178–192.","ufg":"Besginow, Andreas/Büttner, Sebastian/Röcker, Carsten: Making Object Detection Available to Everyone - A Hardware Prototype for Semi-automatic Synthetic Data Generation, in: o. Hg.: 22nd International Conference on Human-Computer Interaction, Bd. 12203, Berlin 2020 (Lecture Notes in Computer Science ), S. 178–192.","mla":"Besginow, Andreas, et al. “Making Object Detection Available to Everyone - A Hardware Prototype for Semi-Automatic Synthetic Data Generation.” 22nd International Conference on Human-Computer Interaction, vol. 12203, Springer, 2020, pp. 178–92, https://doi.org/10.1007/978-3-030-50344-4_14.","bjps":"Besginow A, Büttner S and Röcker C (2020) Making Object Detection Available to Everyone - A Hardware Prototype for Semi-Automatic Synthetic Data Generation. 22nd International Conference on Human-Computer Interaction, vol. 12203. Berlin: Springer, pp. 178–192.","havard":"A. Besginow, S. Büttner, C. Röcker, Making Object Detection Available to Everyone - A Hardware Prototype for Semi-automatic Synthetic Data Generation, in: 22nd International Conference on Human-Computer Interaction, Springer, Berlin, 2020: pp. 178–192.","van":"Besginow A, Büttner S, Röcker C. Making Object Detection Available to Everyone - A Hardware Prototype for Semi-automatic Synthetic Data Generation. In: 22nd International Conference on Human-Computer Interaction. Berlin: Springer; 2020. p. 178–92. (Lecture Notes in Computer Science ; vol. 12203).","chicago":"Besginow, Andreas, Sebastian Büttner, and Carsten Röcker. “Making Object Detection Available to Everyone - A Hardware Prototype for Semi-Automatic Synthetic Data Generation.” In 22nd International Conference on Human-Computer Interaction, 12203:178–92. Lecture Notes in Computer Science . Berlin: Springer, 2020. https://doi.org/10.1007/978-3-030-50344-4_14.","apa":"Besginow, A., Büttner, S., & Röcker, C. (2020). Making Object Detection Available to Everyone - A Hardware Prototype for Semi-automatic Synthetic Data Generation. 22nd International Conference on Human-Computer Interaction, 12203, 178–192. https://doi.org/10.1007/978-3-030-50344-4_14"}},{"oa":"1","language":[{"iso":"eng"}],"publication":"ACM CHI Conference on Human Factors in Computing Systems (CHI 2020)","publication_identifier":{"eisbn":["978-1-4503-6708-0"]},"date_created":"2020-11-26T14:10:06Z","date_updated":"2023-03-15T13:49:50Z","editor":[{"last_name":"Bernhaupt","full_name":"Bernhaupt, Regina","first_name":"Regina"},{"last_name":"Mueller","full_name":"Mueller, Florian \"Floyd\"","first_name":"Florian \"Floyd\""}],"author":[{"first_name":"Sebastian","id":"61868","full_name":"Büttner, Sebastian","last_name":"Büttner"},{"first_name":"Michael","last_name":"Prilla","full_name":"Prilla, Michael"},{"first_name":"Carsten","full_name":"Röcker, Carsten","last_name":"Röcker","id":"61525"}],"year":2020,"main_file_link":[{"open_access":"1","url":"https://dl.acm.org/doi/pdf/10.1145/3313831.3376720"}],"status":"public","title":"Augmented Reality Training for Industrial Assembly Work – Are Projection-based AR Assistive Systems an Appropriate Tool for Assembly Training?","citation":{"havard":"S. Büttner, M. Prilla, C. Röcker, Augmented Reality Training for Industrial Assembly Work – Are Projection-based AR Assistive Systems an Appropriate Tool for Assembly Training?, in: R. Bernhaupt, F. “Floyd” Mueller (Eds.), ACM CHI Conference on Human Factors in Computing Systems (CHI 2020), ACM, New York, 2020.","bjps":"Büttner S, Prilla M and Röcker C (2020) Augmented Reality Training for Industrial Assembly Work – Are Projection-Based AR Assistive Systems an Appropriate Tool for Assembly Training? In Bernhaupt R and Mueller F ‘Floyd’ (eds), ACM CHI Conference on Human Factors in Computing Systems (CHI 2020). New York: ACM.","mla":"Büttner, Sebastian, et al. “Augmented Reality Training for Industrial Assembly Work – Are Projection-Based AR Assistive Systems an Appropriate Tool for Assembly Training?” ACM CHI Conference on Human Factors in Computing Systems (CHI 2020), edited by Regina Bernhaupt and Florian “Floyd” Mueller, ACM, 2020, doi:https://doi.org/10.1145/3313831.3376720.","ufg":"Büttner, Sebastian et. al. (2020): Augmented Reality Training for Industrial Assembly Work – Are Projection-based AR Assistive Systems an Appropriate Tool for Assembly Training?, in: Regina Bernhaupt/Florian „Floyd“ Mueller (Hgg.): ACM CHI Conference on Human Factors in Computing Systems (CHI 2020), New York.","ama":"Büttner S, Prilla M, Röcker C. Augmented Reality Training for Industrial Assembly Work – Are Projection-based AR Assistive Systems an Appropriate Tool for Assembly Training? In: Bernhaupt R, Mueller F “Floyd,” eds. ACM CHI Conference on Human Factors in Computing Systems (CHI 2020). New York: ACM; 2020. doi:https://doi.org/10.1145/3313831.3376720","van":"Büttner S, Prilla M, Röcker C. Augmented Reality Training for Industrial Assembly Work – Are Projection-based AR Assistive Systems an Appropriate Tool for Assembly Training? In: Bernhaupt R, Mueller F “Floyd,” editors. ACM CHI Conference on Human Factors in Computing Systems (CHI 2020). New York: ACM; 2020.","chicago":"Büttner, Sebastian, Michael Prilla, and Carsten Röcker. “Augmented Reality Training for Industrial Assembly Work – Are Projection-Based AR Assistive Systems an Appropriate Tool for Assembly Training?” In ACM CHI Conference on Human Factors in Computing Systems (CHI 2020), edited by Regina Bernhaupt and Florian “Floyd” Mueller. New York: ACM, 2020. https://doi.org/10.1145/3313831.3376720.","ieee":"S. Büttner, M. Prilla, and C. Röcker, “Augmented Reality Training for Industrial Assembly Work – Are Projection-based AR Assistive Systems an Appropriate Tool for Assembly Training?,” in ACM CHI Conference on Human Factors in Computing Systems (CHI 2020), Honolulu HI USA , 2020.","apa":"Büttner, S., Prilla, M., & Röcker, C. (2020). Augmented Reality Training for Industrial Assembly Work – Are Projection-based AR Assistive Systems an Appropriate Tool for Assembly Training? In R. Bernhaupt & F. “Floyd” Mueller (Eds.), ACM CHI Conference on Human Factors in Computing Systems (CHI 2020). New York: ACM. https://doi.org/10.1145/3313831.3376720","chicago-de":"Büttner, Sebastian, Michael Prilla und Carsten Röcker. 2020. Augmented Reality Training for Industrial Assembly Work – Are Projection-based AR Assistive Systems an Appropriate Tool for Assembly Training? In: ACM CHI Conference on Human Factors in Computing Systems (CHI 2020), hg. von Regina Bernhaupt und Florian „Floyd“ Mueller. New York: ACM. doi:https://doi.org/10.1145/3313831.3376720, .","din1505-2-1":"Büttner, Sebastian ; Prilla, Michael ; Röcker, Carsten: Augmented Reality Training for Industrial Assembly Work – Are Projection-based AR Assistive Systems an Appropriate Tool for Assembly Training? In: Bernhaupt, R. ; Mueller, F. „Floyd“ (Hrsg.): ACM CHI Conference on Human Factors in Computing Systems (CHI 2020). New York : ACM, 2020","short":"S. Büttner, M. Prilla, C. Röcker, in: R. Bernhaupt, F. “Floyd” Mueller (Eds.), ACM CHI Conference on Human Factors in Computing Systems (CHI 2020), ACM, New York, 2020."},"place":"New York","_id":"4098","doi":"https://doi.org/10.1145/3313831.3376720","type":"conference","user_id":"15514","department":[{"_id":"DEP5023"}],"conference":{"start_date":"2020-04-25","end_date":"2020-04-30","name":"CHI '20: Proceedings of the 2020 CHI Conference on Human Factors in Computing Systems","location":"Honolulu HI USA "},"abstract":[{"lang":"eng","text":"Augmented Reality (AR) systems are on their way to industrial application, e.g. projection-based AR is used to enhance assembly work. Previous studies showed advantages of the systems in permanent-use scenarios, such as faster assembly times. In this paper, we investigate whether such systems are suitable for training purposes. Within an experiment, we observed the training with a projection-based AR system over multiple sessions and compared it with a personal training and a paper manual training. Our study shows that projection-based AR systems offer only small benefits in the training scenario. While a systematic mislearning of content is prevented through immediate feedback, our results show that the AR training does not reach the personal training in terms of speed and recall precision after 24 hours. Furthermore, we show that once an assembly task is properly trained, there are no differences in the long-term recall precision, regardless of the training method."}],"publisher":"ACM","publication_status":"published"},{"language":[{"iso":"eng"}],"date_updated":"2023-09-22T08:25:48Z","editor":[{"last_name":"Jäkel","first_name":"Jens","full_name":"Jäkel, Jens"},{"last_name":"Thiel","full_name":"Thiel, Robert","first_name":"Robert"}],"date_created":"2020-12-14T12:36:40Z","publication":"AALE 2020 Automatisierung und Mensch-Technik-Interaktion 17. Fachkonferenz","publication_identifier":{"isbn":["978-3-8007-5180-8"]},"page":"51-60","status":"public","year":"2020","author":[{"id":"74607","first_name":"Slavi","last_name":"Warkentin","full_name":"Warkentin, Slavi"},{"first_name":"Johann","last_name":"Austermann","id":"42114","full_name":"Austermann, Johann"},{"first_name":"Holger","full_name":"Borcherding, Holger","id":"1693","last_name":"Borcherding"}],"main_file_link":[{"url":"https://www.vde-verlag.de/proceedings-en/565180004.html"}],"citation":{"ufg":"Warkentin, Slavi/Austermann, Johann/Borcherding, Holger: Modulare Versuchsanlage für ein industrielles Gleichspannungsnetz mit gesteuerten elektrischen Antrieben, hg. von Jäkel, Jens/Thiel, Robert, Berlin 2020.","havard":"S. Warkentin, J. Austermann, H. Borcherding, Modulare Versuchsanlage für ein industrielles Gleichspannungsnetz mit gesteuerten elektrischen Antrieben, VDE-Verlag, Berlin, 2020.","mla":"Warkentin, Slavi, et al. “Modulare Versuchsanlage Für Ein Industrielles Gleichspannungsnetz Mit Gesteuerten Elektrischen Antrieben.” AALE 2020 Automatisierung Und Mensch-Technik-Interaktion 17. Fachkonferenz, edited by Jens Jäkel and Robert Thiel, VDE-Verlag, 2020, pp. 51–60.","bjps":"Warkentin S, Austermann J and Borcherding H (2020) Modulare Versuchsanlage Für Ein Industrielles Gleichspannungsnetz Mit Gesteuerten Elektrischen Antrieben, Jäkel J and Thiel R (eds). Berlin: VDE-Verlag.","van":"Warkentin S, Austermann J, Borcherding H. Modulare Versuchsanlage für ein industrielles Gleichspannungsnetz mit gesteuerten elektrischen Antrieben. Jäkel J, Thiel R, editors. AALE 2020 Automatisierung und Mensch-Technik-Interaktion 17. Fachkonferenz. Berlin: VDE-Verlag; 2020.","ama":"Warkentin S, Austermann J, Borcherding H. Modulare Versuchsanlage Für Ein Industrielles Gleichspannungsnetz Mit Gesteuerten Elektrischen Antrieben. (Jäkel J, Thiel R, eds.). VDE-Verlag; 2020:51-60.","chicago":"Warkentin, Slavi, Johann Austermann, and Holger Borcherding. Modulare Versuchsanlage Für Ein Industrielles Gleichspannungsnetz Mit Gesteuerten Elektrischen Antrieben. Edited by Jens Jäkel and Robert Thiel. AALE 2020 Automatisierung Und Mensch-Technik-Interaktion 17. Fachkonferenz. Berlin: VDE-Verlag, 2020.","apa":"Warkentin, S., Austermann, J., & Borcherding, H. (2020). Modulare Versuchsanlage für ein industrielles Gleichspannungsnetz mit gesteuerten elektrischen Antrieben. In J. Jäkel & R. Thiel (Eds.), AALE 2020 Automatisierung und Mensch-Technik-Interaktion 17. Fachkonferenz (pp. 51–60). VDE-Verlag.","ieee":"S. Warkentin, J. Austermann, and H. Borcherding, Modulare Versuchsanlage für ein industrielles Gleichspannungsnetz mit gesteuerten elektrischen Antrieben. Berlin: VDE-Verlag, 2020, pp. 51–60.","din1505-2-1":"Warkentin, Slavi ; Austermann, Johann ; Borcherding, Holger ; Jäkel, J. ; Thiel, R. (Hrsg.): Modulare Versuchsanlage für ein industrielles Gleichspannungsnetz mit gesteuerten elektrischen Antrieben. Berlin : VDE-Verlag, 2020","chicago-de":"Warkentin, Slavi, Johann Austermann und Holger Borcherding. 2020. Modulare Versuchsanlage für ein industrielles Gleichspannungsnetz mit gesteuerten elektrischen Antrieben. Hg. von Jens Jäkel und Robert Thiel. AALE 2020 Automatisierung und Mensch-Technik-Interaktion 17. Fachkonferenz. Berlin: VDE-Verlag.","short":"S. Warkentin, J. Austermann, H. Borcherding, Modulare Versuchsanlage Für Ein Industrielles Gleichspannungsnetz Mit Gesteuerten Elektrischen Antrieben, VDE-Verlag, Berlin, 2020."},"title":"Modulare Versuchsanlage für ein industrielles Gleichspannungsnetz mit gesteuerten elektrischen Antrieben","place":"Berlin","_id":"4284","alternative_title":["Tagungsband"],"user_id":"83781","type":"conference_editor_article","quality_controlled":"1","publisher":"VDE-Verlag","department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"conference":{"start_date":"2020-03-04","end_date":"2020-03-06","location":"Leipzig","name":"AALE 2020 Automatisierung und Mensch-Technik-Interaktion 17. Fachkonferenz"},"abstract":[{"text":"In diesem Beitrag wird das Konzept einer Versuchsanlage für industrielle Gleichspannungs-netze vorgestellt. Diese besteht aus mehreren elektrischen Antriebssätzen (Prüfling und Last-maschine), aus verschiedenen uni- und bidirektionalen Gleichrichtern, aus dezentralen Ener-gieerzeugern (PV und BHKW) und mehreren Energiespeichern. Alle Geräte sind über ein ge-meinsames Gleichspannungsnetz gekoppelt. Gleichspannungsnetze ermöglichen einen sehr einfachen bidirektionalen Energieaustausch zwischen den angeschlossenen Geräten. Daher kann beispielsweise Bremsenergie bei elektrischen Antrieben ohne zusätzlichen Aufwand ge-nutzt werden und auch die Integration von dezentralen Energieerzeugungsanlagen wie Photo-voltaik (PV) oder Blockheizkraftwerden (BHKW) sowie von Energiespeichern ist deutlich einfa-cher als bei AC-Netzen. Das Besondere an dieser Anlage ist, dass die mechanischen Belastun-gen der Antriebe einer Produktionsmaschine realitätsnah nachgebildet werden können. In einem Echtzeit-Modell, umgesetzt in Matlab/Simulink, werden Sollwerte der Drehzahl- und Drehmomentenverläufe berechnet und mittels Feldbus an die jeweiligen Lastantriebswechsel-richter übermittelt. Dadurch ergeben sich an der Welle nicht nur reale mechanische Größen, sondern auch die sich im Gleichspannungsnetz einstellenden Ströme entsprechen denen einer realen Anlage. Somit kann z.B. untersucht werden, wie sich eine von AC- auf DC-Netz umge-rüstete Produktionsmaschine verhalten würde, ohne diese bauen zu müssen. Weiterhin können die Auswirkungen von Speichereinbindungen und Netzstörungen realitätsnah untersucht wer-den.","lang":"ger"}],"publication_status":"published"},{"user_id":"15514","date_updated":"2023-03-15T13:49:51Z","publication":"Proceedings of the Third Ambient Assisted Living Conference (AAL'10), January 26 - 27, VDE Verlag, Berlin, Germany, CD-ROM","type":"conference","date_created":"2020-12-23T12:34:54Z","language":[{"iso":"eng"}],"_id":"4305","citation":{"short":"S. Gaul, M. Ziefle, K. Arning, W. Wilkowska, K. Kasugai, C. Röcker, E.-M. Jakobs, in: Proceedings of the Third Ambient Assisted Living Conference (AAL’10), January 26 - 27, VDE Verlag, Berlin, Germany, CD-ROM, 2020.","chicago-de":"Gaul, Sylvia, M. Ziefle, Katrin Arning, Wiktoria Wilkowska, Kai Kasugai, Carsten Röcker und Eva-Maria Jakobs. 2020. Technology Acceptance as an Integrative Component of Product Developments in the Medical Technology Sector. In: Proceedings of the Third Ambient Assisted Living Conference (AAL’10), January 26 - 27, VDE Verlag, Berlin, Germany, CD-ROM.","din1505-2-1":"Gaul, Sylvia ; Ziefle, M. ; Arning, Katrin ; Wilkowska, Wiktoria ; Kasugai, Kai ; Röcker, Carsten ; Jakobs, Eva-Maria: Technology Acceptance as an Integrative Component of Product Developments in the Medical Technology Sector. In: Proceedings of the Third Ambient Assisted Living Conference (AAL’10), January 26 - 27, VDE Verlag, Berlin, Germany, CD-ROM, 2020","apa":"Gaul, S., Ziefle, M., Arning, K., Wilkowska, W., Kasugai, K., Röcker, C., & Jakobs, E.-M. (2020). Technology Acceptance as an Integrative Component of Product Developments in the Medical Technology Sector. In Proceedings of the Third Ambient Assisted Living Conference (AAL’10), January 26 - 27, VDE Verlag, Berlin, Germany, CD-ROM.","chicago":"Gaul, Sylvia, M. Ziefle, Katrin Arning, Wiktoria Wilkowska, Kai Kasugai, Carsten Röcker, and Eva-Maria Jakobs. “Technology Acceptance as an Integrative Component of Product Developments in the Medical Technology Sector.” In Proceedings of the Third Ambient Assisted Living Conference (AAL’10), January 26 - 27, VDE Verlag, Berlin, Germany, CD-ROM, 2020.","van":"Gaul S, Ziefle M, Arning K, Wilkowska W, Kasugai K, Röcker C, et al. Technology Acceptance as an Integrative Component of Product Developments in the Medical Technology Sector. In: Proceedings of the Third Ambient Assisted Living Conference (AAL’10), January 26 - 27, VDE Verlag, Berlin, Germany, CD-ROM. 2020.","ufg":"Gaul, Sylvia et. al. (2020): Technology Acceptance as an Integrative Component of Product Developments in the Medical Technology Sector, in: Proceedings of the Third Ambient Assisted Living Conference (AAL’10), January 26 - 27, VDE Verlag, Berlin, Germany, CD-ROM.","bjps":"Gaul S et al. (2020) Technology Acceptance as an Integrative Component of Product Developments in the Medical Technology Sector. Proceedings of the Third Ambient Assisted Living Conference (AAL’10), January 26 - 27, VDE Verlag, Berlin, Germany, CD-ROM.","havard":"S. Gaul, M. Ziefle, K. Arning, W. Wilkowska, K. Kasugai, C. Röcker, E.-M. Jakobs, Technology Acceptance as an Integrative Component of Product Developments in the Medical Technology Sector, in: Proceedings of the Third Ambient Assisted Living Conference (AAL’10), January 26 - 27, VDE Verlag, Berlin, Germany, CD-ROM, 2020.","mla":"Gaul, Sylvia, et al. “Technology Acceptance as an Integrative Component of Product Developments in the Medical Technology Sector.” Proceedings of the Third Ambient Assisted Living Conference (AAL’10), January 26 - 27, VDE Verlag, Berlin, Germany, CD-ROM, 2020.","ieee":"S. Gaul et al., “Technology Acceptance as an Integrative Component of Product Developments in the Medical Technology Sector,” in Proceedings of the Third Ambient Assisted Living Conference (AAL’10), January 26 - 27, VDE Verlag, Berlin, Germany, CD-ROM, 2020.","ama":"Gaul S, Ziefle M, Arning K, et al. Technology Acceptance as an Integrative Component of Product Developments in the Medical Technology Sector. In: Proceedings of the Third Ambient Assisted Living Conference (AAL’10), January 26 - 27, VDE Verlag, Berlin, Germany, CD-ROM. ; 2020."},"publication_status":"published","title":"Technology Acceptance as an Integrative Component of Product Developments in the Medical Technology Sector","status":"public","year":2020,"author":[{"first_name":"Sylvia","last_name":"Gaul","full_name":"Gaul, Sylvia"},{"full_name":"Ziefle, M.","last_name":"Ziefle","first_name":"M."},{"last_name":"Arning","first_name":"Katrin","full_name":"Arning, Katrin"},{"last_name":"Wilkowska","full_name":"Wilkowska, Wiktoria","first_name":"Wiktoria"},{"first_name":"Kai","last_name":"Kasugai","full_name":"Kasugai, Kai"},{"full_name":"Röcker, Carsten","last_name":"Röcker","id":"61525","first_name":"Carsten"},{"full_name":"Jakobs, Eva-Maria","last_name":"Jakobs","first_name":"Eva-Maria"}],"department":[{"_id":"DEP5023"}],"conference":{"end_date":"2020-01-27","start_date":"2020-01-26","name":"Third Ambient Assisted Living Conference"}},{"status":"public","conference":{"location":"Lemgo","name":"11. Jahreskolloquium KommA 2020","start_date":"2020-10-29","end_date":"2020-10-29"},"department":[{"_id":"DEP5023"}],"author":[{"last_name":"Geng","id":"61408","first_name":"Christoph","full_name":"Geng, Christoph"},{"first_name":"Natalia","full_name":"Moriz, Natalia","last_name":"Moriz","id":"44238"},{"last_name":"Bunte","id":"58885","first_name":"Andreas","full_name":"Bunte, Andreas"},{"last_name":"Trsek","first_name":"Henning","full_name":"Trsek, Henning","id":"1486"}],"year":2020,"citation":{"chicago":"Geng, Christoph, Natalia Moriz, Andreas Bunte, and Henning Trsek. “Concept for Rule-Based Information Aggregation in Modular Production Plants.” In KommA 2020 – Jahreskolloquium Kommunikation in Der Automation. Lemgo, Germany, 2020.","apa":"Geng, C., Moriz, N., Bunte, A., & Trsek, H. (2020). Concept for Rule-Based Information Aggregation in Modular Production Plants. In KommA 2020 – Jahreskolloquium Kommunikation in der Automation. Lemgo, Germany.","ieee":"C. Geng, N. Moriz, A. Bunte, and H. Trsek, “Concept for Rule-Based Information Aggregation in Modular Production Plants,” in KommA 2020 – Jahreskolloquium Kommunikation in der Automation, Lemgo, 2020.","ufg":"Geng, Christoph et. al. (2020): Concept for Rule-Based Information Aggregation in Modular Production Plants, in: KommA 2020 – Jahreskolloquium Kommunikation in der Automation, Lemgo, Germany.","havard":"C. Geng, N. Moriz, A. Bunte, H. Trsek, Concept for Rule-Based Information Aggregation in Modular Production Plants, in: KommA 2020 – Jahreskolloquium Kommunikation in Der Automation, Lemgo, Germany, 2020.","mla":"Geng, Christoph, et al. “Concept for Rule-Based Information Aggregation in Modular Production Plants.” KommA 2020 – Jahreskolloquium Kommunikation in Der Automation, 2020.","bjps":"Geng C et al. (2020) Concept for Rule-Based Information Aggregation in Modular Production Plants. KommA 2020 – Jahreskolloquium Kommunikation in Der Automation. Lemgo, Germany.","van":"Geng C, Moriz N, Bunte A, Trsek H. Concept for Rule-Based Information Aggregation in Modular Production Plants. In: KommA 2020 – Jahreskolloquium Kommunikation in der Automation. Lemgo, Germany; 2020.","ama":"Geng C, Moriz N, Bunte A, Trsek H. Concept for Rule-Based Information Aggregation in Modular Production Plants. In: KommA 2020 – Jahreskolloquium Kommunikation in Der Automation. Lemgo, Germany; 2020.","din1505-2-1":"Geng, Christoph ; Moriz, Natalia ; Bunte, Andreas ; Trsek, Henning: Concept for Rule-Based Information Aggregation in Modular Production Plants. In: KommA 2020 – Jahreskolloquium Kommunikation in der Automation. Lemgo, Germany, 2020","chicago-de":"Geng, Christoph, Natalia Moriz, Andreas Bunte und Henning Trsek. 2020. Concept for Rule-Based Information Aggregation in Modular Production Plants. In: KommA 2020 – Jahreskolloquium Kommunikation in der Automation. Lemgo, Germany.","short":"C. Geng, N. Moriz, A. Bunte, H. Trsek, in: KommA 2020 – Jahreskolloquium Kommunikation in Der Automation, Lemgo, Germany, 2020."},"title":"Concept for Rule-Based Information Aggregation in Modular Production Plants","_id":"4512","language":[{"iso":"eng"}],"place":"Lemgo, Germany","date_updated":"2023-03-15T13:49:53Z","user_id":"68554","type":"conference","date_created":"2021-01-26T12:04:18Z","publication":"KommA 2020 – Jahreskolloquium Kommunikation in der Automation"},{"user_id":"68554","date_updated":"2023-03-15T13:49:53Z","publication":"25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) ","date_created":"2021-01-26T12:08:54Z","type":"conference","place":"Vienna, Austria","language":[{"iso":"eng"}],"_id":"4513","citation":{"ama":"Bunte A, Ressler H, Moriz N. Automated Detection of Production Cycles in Production Plants using Machine Learning. In: 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) . Vienna, Austria; 2020.","van":"Bunte A, Ressler H, Moriz N. Automated Detection of Production Cycles in Production Plants using Machine Learning. In: 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) . Vienna, Austria; 2020.","havard":"A. Bunte, H. Ressler, N. Moriz, Automated Detection of Production Cycles in Production Plants using Machine Learning, in: 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) , Vienna, Austria, 2020.","mla":"Bunte, Andreas, et al. “Automated Detection of Production Cycles in Production Plants Using Machine Learning.” 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) , 2020.","bjps":"Bunte A, Ressler H and Moriz N (2020) Automated Detection of Production Cycles in Production Plants Using Machine Learning. 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) . Vienna, Austria.","ufg":"Bunte, Andreas et. al. (2020): Automated Detection of Production Cycles in Production Plants using Machine Learning, in: 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) , Vienna, Austria.","ieee":"A. Bunte, H. Ressler, and N. Moriz, “Automated Detection of Production Cycles in Production Plants using Machine Learning,” in 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) , Wien, 2020.","apa":"Bunte, A., Ressler, H., & Moriz, N. (2020). Automated Detection of Production Cycles in Production Plants using Machine Learning. In 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) . Vienna, Austria.","chicago":"Bunte, Andreas, Henrik Ressler, and Natalia Moriz. “Automated Detection of Production Cycles in Production Plants Using Machine Learning.” In 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) . Vienna, Austria, 2020.","short":"A. Bunte, H. Ressler, N. Moriz, in: 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) , Vienna, Austria, 2020.","chicago-de":"Bunte, Andreas, Henrik Ressler und Natalia Moriz. 2020. Automated Detection of Production Cycles in Production Plants using Machine Learning. In: 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) . Vienna, Austria.","din1505-2-1":"Bunte, Andreas ; Ressler, Henrik ; Moriz, Natalia: Automated Detection of Production Cycles in Production Plants using Machine Learning. In: 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) . Vienna, Austria, 2020"},"title":"Automated Detection of Production Cycles in Production Plants using Machine Learning","status":"public","author":[{"full_name":"Bunte, Andreas","id":"58885","last_name":"Bunte","first_name":"Andreas"},{"first_name":"Henrik","id":"62216","full_name":"Ressler, Henrik","last_name":"Ressler"},{"id":"44238","first_name":"Natalia","full_name":"Moriz, Natalia","last_name":"Moriz"}],"year":2020,"conference":{"location":"Wien","name":"25th IEEE International Conference on Emerging Technologies and Factory Automation","end_date":"2020-09-11","start_date":"2020-09-08"},"department":[{"_id":"DEP5023"}]},{"type":"journal_article","intvolume":" 111","user_id":"83781","_id":"4518","doi":"10.1007/s00170-020-06094-z","isi":"1","publication_status":"published","abstract":[{"lang":"eng","text":"This paper introduces CAAI, a novel cognitive architecture for artificial intelligence in cyber-physical production systems. The goal of the architecture is to reduce the implementation effort for the usage of artificial intelligence algorithms. The core of the CAAI is a cognitive module that processes the user's declarative goals, selects suitable models and algorithms, and creates a configuration for the execution of a processing pipeline on a big data platform. Constant observation and evaluation against performance criteria assess the performance of pipelines for many and different use cases. Based on these evaluations, the pipelines are automatically adapted if necessary. The modular design with well-defined interfaces enables the reusability and extensibility of pipeline components. A big data platform implements this modular design supported by technologies such as Docker, Kubernetes, and Kafka for virtualization and orchestration of the individual components and their communication. The implementation of the architecture is evaluated using a real-world use case. The prototypic implementation is accessible on GitHub and contains a demonstration."}],"issue":"1/2","department":[{"_id":"DEP5023"}],"publisher":"Springer","publication_identifier":{"issn":["0268-3768"],"eissn":["1433-3015"]},"publication":"The International Journal of Advanced Manufacturing Technology","date_created":"2021-01-26T12:24:10Z","date_updated":"2025-06-26T13:38:24Z","keyword":["CPPS","Artificial intelligence","Industry 40","Reference architecture","Optimization","SMBO","Cognition","Big data platform","Modularization","AutoML"],"language":[{"iso":"eng"}],"title":"CAAI -- A Cognitive Architecture to Introduce Artificial Intelligence in Cyber-Physical Production Systems","volume":111,"citation":{"ieee":"A. Fischbach et al., “CAAI -- A Cognitive Architecture to Introduce Artificial Intelligence in Cyber-Physical Production Systems,” The International Journal of Advanced Manufacturing Technology, vol. 111, no. 1/2, pp. 609–626, 2020, doi: 10.1007/s00170-020-06094-z.","ama":"Fischbach A, Strohschein J, Bunte A, et al. CAAI -- A Cognitive Architecture to Introduce Artificial Intelligence in Cyber-Physical Production Systems. The International Journal of Advanced Manufacturing Technology. 2020;111(1/2):609-626. doi:10.1007/s00170-020-06094-z","chicago":"Fischbach, Andreas, Jan Strohschein, Andreas Bunte, Jörg Stork, Heide Faeskorn-Woyke, Natalia Moriz, and Thomas Bartz-Beielstein. “CAAI -- A Cognitive Architecture to Introduce Artificial Intelligence in Cyber-Physical Production Systems.” The International Journal of Advanced Manufacturing Technology 111, no. 1/2 (2020): 609–26. https://doi.org/10.1007/s00170-020-06094-z.","apa":"Fischbach, A., Strohschein, J., Bunte, A., Stork, J., Faeskorn-Woyke, H., Moriz, N., & Bartz-Beielstein, T. (2020). CAAI -- A Cognitive Architecture to Introduce Artificial Intelligence in Cyber-Physical Production Systems. The International Journal of Advanced Manufacturing Technology, 111(1/2), 609–626. https://doi.org/10.1007/s00170-020-06094-z","ufg":"Fischbach, Andreas u. a.: CAAI -- A Cognitive Architecture to Introduce Artificial Intelligence in Cyber-Physical Production Systems, in: The International Journal of Advanced Manufacturing Technology 111 (2020), H. 1/2, S. 609–626.","bjps":"Fischbach A et al. (2020) CAAI -- A Cognitive Architecture to Introduce Artificial Intelligence in Cyber-Physical Production Systems. The International Journal of Advanced Manufacturing Technology 111, 609–626.","mla":"Fischbach, Andreas, et al. “CAAI -- A Cognitive Architecture to Introduce Artificial Intelligence in Cyber-Physical Production Systems.” The International Journal of Advanced Manufacturing Technology, vol. 111, no. 1/2, 2020, pp. 609–26, https://doi.org/10.1007/s00170-020-06094-z.","havard":"A. Fischbach, J. Strohschein, A. Bunte, J. Stork, H. Faeskorn-Woyke, N. Moriz, T. Bartz-Beielstein, CAAI -- A Cognitive Architecture to Introduce Artificial Intelligence in Cyber-Physical Production Systems, The International Journal of Advanced Manufacturing Technology. 111 (2020) 609–626.","van":"Fischbach A, Strohschein J, Bunte A, Stork J, Faeskorn-Woyke H, Moriz N, et al. CAAI -- A Cognitive Architecture to Introduce Artificial Intelligence in Cyber-Physical Production Systems. The International Journal of Advanced Manufacturing Technology. 2020;111(1/2):609–26.","din1505-2-1":"Fischbach, Andreas ; Strohschein, Jan ; Bunte, Andreas ; Stork, Jörg ; Faeskorn-Woyke, Heide ; Moriz, Natalia ; Bartz-Beielstein, Thomas: CAAI -- A Cognitive Architecture to Introduce Artificial Intelligence in Cyber-Physical Production Systems. In: The International Journal of Advanced Manufacturing Technology Bd. 111, Springer (2020), Nr. 1/2, S. 609–626","chicago-de":"Fischbach, Andreas, Jan Strohschein, Andreas Bunte, Jörg Stork, Heide Faeskorn-Woyke, Natalia Moriz und Thomas Bartz-Beielstein. 2020. CAAI -- A Cognitive Architecture to Introduce Artificial Intelligence in Cyber-Physical Production Systems. The International Journal of Advanced Manufacturing Technology 111, Nr. 1/2: 609–626. doi:10.1007/s00170-020-06094-z, .","short":"A. Fischbach, J. Strohschein, A. Bunte, J. Stork, H. Faeskorn-Woyke, N. Moriz, T. Bartz-Beielstein, The International Journal of Advanced Manufacturing Technology 111 (2020) 609–626."},"external_id":{"isi":["000574389900002"]},"year":"2020","author":[{"last_name":"Fischbach","full_name":"Fischbach, Andreas","first_name":"Andreas"},{"full_name":"Strohschein, Jan","first_name":"Jan","last_name":"Strohschein"},{"first_name":"Andreas","last_name":"Bunte","id":"58885","full_name":"Bunte, Andreas"},{"last_name":"Stork","first_name":"Jörg","full_name":"Stork, Jörg"},{"first_name":"Heide","last_name":"Faeskorn-Woyke","full_name":"Faeskorn-Woyke, Heide"},{"last_name":"Moriz","first_name":"Natalia","id":"44238","full_name":"Moriz, Natalia"},{"full_name":"Bartz-Beielstein, Thomas","first_name":"Thomas","last_name":"Bartz-Beielstein"}],"status":"public","page":"609-626"},{"citation":{"ama":"Wefing P, Conradi F, Beckhoff-Bumbke S. Closed Loop Systems Engineering.; 2020.","ieee":"P. Wefing, F. Conradi, and S. Beckhoff-Bumbke, Closed Loop Systems Engineering. 2020.","chicago-de":"Wefing, Patrick, Florian Conradi und Steffen Beckhoff-Bumbke. 2020. Closed Loop Systems Engineering.","din1505-2-1":"Wefing, Patrick ; Conradi, Florian ; Beckhoff-Bumbke, Steffen: Closed Loop Systems Engineering, 2020","short":"P. Wefing, F. Conradi, S. Beckhoff-Bumbke, Closed Loop Systems Engineering, 2020.","havard":"P. Wefing, F. Conradi, S. Beckhoff-Bumbke, Closed Loop Systems Engineering, 2020.","mla":"Wefing, Patrick, et al. Closed Loop Systems Engineering. 2020.","bjps":"Wefing P, Conradi F and Beckhoff-Bumbke S (2020) Closed Loop Systems Engineering. .","ufg":"Wefing, Patrick/Conradi, Florian/Beckhoff-Bumbke, Steffen: Closed Loop Systems Engineering, o. O. 2020.","van":"Wefing P, Conradi F, Beckhoff-Bumbke S. Closed Loop Systems Engineering. 2020.","chicago":"Wefing, Patrick, Florian Conradi, and Steffen Beckhoff-Bumbke. Closed Loop Systems Engineering, 2020.","apa":"Wefing, P., Conradi, F., & Beckhoff-Bumbke, S. (2020). Closed Loop Systems Engineering. owl Maschinenbau - Digitaler Fachkongress, Bielefeld."},"title":"Closed Loop Systems Engineering","status":"public","conference":{"start_date":"2020-08-31","end_date":"2020-09-10","name":"owl Maschinenbau - Digitaler Fachkongress","location":"Bielefeld"},"department":[{"_id":"DEP4023"},{"_id":"DEP1308"}],"author":[{"first_name":"Patrick","id":"68976","last_name":"Wefing","full_name":"Wefing, Patrick"},{"last_name":"Conradi","first_name":"Florian","full_name":"Conradi, Florian","id":"68967"},{"full_name":"Beckhoff-Bumbke, Steffen","first_name":"Steffen","last_name":"Beckhoff-Bumbke"}],"year":"2020","date_updated":"2024-04-15T07:23:52Z","user_id":"81304","date_created":"2022-06-30T17:11:01Z","type":"conference_speech","language":[{"iso":"eng"}],"_id":"8405"},{"page":"228","status":"public","publisher":"Hanser","department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"year":2020,"author":[{"id":"1693","first_name":"Holger","last_name":"Borcherding","full_name":"Borcherding, Holger"},{"last_name":"Austermann","first_name":"Johann","full_name":"Austermann, Johann","id":"42114"},{"full_name":"Sauer, Alexander","first_name":"Alexander","last_name":"Sauer"}],"main_file_link":[{"open_access":"1","url":"https://www.hanser-elibrary.com/doi/10.3139/9783446466128"}],"abstract":[{"text":"Die Gleichstromfabrik\r\nDie Energiewende hat viele Facetten. Eine davon ist die Stromversorgung von Fabriken. Hier liegt der Ursprung des Umbruchs in der Antriebstechnik, die heute bereits gleichstrombasiert ist, während das Netz Wechselstrom liefert. In diesem Buch erfahren Sie, welche Vorteile es hat ein umfassendes Gleichstromfabriknetz aufzubauen, in das alle Stromerzeuger ihre Energie einspeisen und aus dem alle Verbraucher direkt versorgt werden. Alle damit verbundenen konzeptionellen, wirtschaftlichen, technischen und organisatorischen Fragestellungen werden in diesem Buch behandelt, z. B.:\r\n\r\n- Potenziale und wirtschaftliche Abschätzung der Gleichstromfabrik im Vergleich mit einer heutigen wechselstromversorgten Fabrik\r\n- Systemkonzeptentwurf für die notwendigen System- und Geräteanpassungen mit konkreten Lösungen für die Umsetzung\r\n- Detaillierte Behandlung aller relevanten technischen Themen, wie Topologie, Spannungsniveau, Versorgungskonzepte, Erdung und Netzformen, EMV, Vorladung\r\n- Kennlinienbasierte Regelung eines Gleichstromnetzes mit unterschiedlichen Versorgungsgeräten und Lasten\r\n- Gewährleistung der Netzstabilität, auch bei hochdynamischer Belastung und ohne zusätzliche Kommunikation\r\n- Behandlung wesentlicher Sicherheitsaspekte\r\n- Planung und Auslegung eines Gleichstromnetzes in der eigenen Fabrik, inklusive Darstellung der Planungsaufgaben und Hinweise für den Anwender\r\n\r\nDas Buch zeigt darüber hinaus vier reale Anwendungen, die mit dem beschriebenen, herstelleroffenen Gleichstromnetz realisiert wurden. Dabei werden jeweils unterschiedliche konzeptionelle Schwerpunkte erläutert, um die mögliche Bandbreite des Einsatzes zu demonstrieren.","lang":"ger"}],"publication_status":"published","citation":{"ieee":"H. Borcherding, J. Austermann, and A. Sauer, Die Gleichstromfabrik. Hanser, 2020.","ama":"Borcherding H, Austermann J, Sauer A. Die Gleichstromfabrik. (Sauer A, ed.). Hanser; 2020.","chicago-de":"Borcherding, Holger, Johann Austermann und Alexander Sauer. 2020. Die Gleichstromfabrik. Hg. von Alexander Sauer. Hanser.","din1505-2-1":"Borcherding, Holger ; Austermann, Johann ; Sauer, Alexander ; Sauer, A. (Hrsg.): Die Gleichstromfabrik : Hanser, 2020","short":"H. Borcherding, J. Austermann, A. Sauer, Die Gleichstromfabrik, Hanser, 2020.","chicago":"Borcherding, Holger, Johann Austermann, and Alexander Sauer. Die Gleichstromfabrik. Edited by Alexander Sauer. Hanser, 2020.","apa":"Borcherding, H., Austermann, J., & Sauer, A. (2020). Die Gleichstromfabrik. (A. Sauer, Ed.). Hanser.","bjps":"Borcherding H, Austermann J and Sauer A (2020) Die Gleichstromfabrik, Sauer A (ed.). Hanser.","havard":"H. Borcherding, J. Austermann, A. Sauer, Die Gleichstromfabrik, Hanser, 2020.","mla":"Borcherding, Holger, et al. Die Gleichstromfabrik. Edited by Alexander Sauer, Hanser, 2020.","ufg":"Borcherding, Holger et. al. (2020): Die Gleichstromfabrik.","van":"Borcherding H, Austermann J, Sauer A. Die Gleichstromfabrik. Sauer A, editor. Hanser; 2020. 228 p."},"title":"Die Gleichstromfabrik","language":[{"iso":"ger"}],"_id":"8414","oa":"1","date_updated":"2023-03-15T13:50:15Z","user_id":"64800","editor":[{"first_name":"Alexander","last_name":"Sauer","full_name":"Sauer, Alexander"}],"type":"book","date_created":"2022-07-05T07:59:00Z","publication_identifier":{"isbn":["978-3-446-46581-7"]}},{"title":"Modular Experimental Plant for Industrial DC Grid with Controlled Electrical Drives","citation":{"bjps":"Warkentin S, Austermann J and Borcherding H (2020) Modular Experimental Plant for Industrial DC Grid with Controlled Electrical Drives, Schlz D (ed.). Berlin ; Offenbach: VDE Verlag.","mla":"Warkentin, Slavi, et al. “Modular Experimental Plant for Industrial DC Grid with Controlled Electrical Drives.” NEIS 2020 Conference on Sustainable Energy Supply and Energy Storage Systems, edited by Detlef Schlz, VDE Verlag, 2020, pp. 197–202.","havard":"S. Warkentin, J. Austermann, H. Borcherding, Modular Experimental Plant for Industrial DC Grid with Controlled Electrical Drives, VDE Verlag, Berlin ; Offenbach, 2020.","ufg":"Warkentin, Slavi/Austermann, Johann/Borcherding, Holger: Modular Experimental Plant for Industrial DC Grid with Controlled Electrical Drives, hg. von Schlz, Detlef, Berlin ; Offenbach 2020.","van":"Warkentin S, Austermann J, Borcherding H. Modular Experimental Plant for Industrial DC Grid with Controlled Electrical Drives. Schlz D, editor. NEIS 2020 Conference on Sustainable Energy Supply and Energy Storage Systems. Berlin ; Offenbach: VDE Verlag; 2020.","chicago":"Warkentin, Slavi, Johann Austermann, and Holger Borcherding. Modular Experimental Plant for Industrial DC Grid with Controlled Electrical Drives. Edited by Detlef Schlz. NEIS 2020 Conference on Sustainable Energy Supply and Energy Storage Systems. Berlin ; Offenbach: VDE Verlag, 2020.","apa":"Warkentin, S., Austermann, J., & Borcherding, H. (2020). Modular Experimental Plant for Industrial DC Grid with Controlled Electrical Drives. In D. Schlz (Ed.), NEIS 2020 Conference on Sustainable Energy Supply and Energy Storage Systems (pp. 197–202). VDE Verlag.","chicago-de":"Warkentin, Slavi, Johann Austermann und Holger Borcherding. 2020. Modular Experimental Plant for Industrial DC Grid with Controlled Electrical Drives. Hg. von Detlef Schlz. NEIS 2020 Conference on Sustainable Energy Supply and Energy Storage Systems. Berlin ; Offenbach: VDE Verlag.","din1505-2-1":"Warkentin, Slavi ; Austermann, Johann ; Borcherding, Holger ; Schlz, D. (Hrsg.): Modular Experimental Plant for Industrial DC Grid with Controlled Electrical Drives. Berlin ; Offenbach : VDE Verlag, 2020","short":"S. Warkentin, J. Austermann, H. Borcherding, Modular Experimental Plant for Industrial DC Grid with Controlled Electrical Drives, VDE Verlag, Berlin ; Offenbach, 2020.","ama":"Warkentin S, Austermann J, Borcherding H. Modular Experimental Plant for Industrial DC Grid with Controlled Electrical Drives. (Schlz D, ed.). VDE Verlag; 2020:197-202.","ieee":"S. Warkentin, J. Austermann, and H. Borcherding, Modular Experimental Plant for Industrial DC Grid with Controlled Electrical Drives. Berlin ; Offenbach: VDE Verlag, 2020, pp. 197–202."},"year":"2020","main_file_link":[{"url":"https://ieeexplore.ieee.org/document/9273417"}],"author":[{"full_name":"Warkentin, Slavi","id":"74607","last_name":"Warkentin","first_name":"Slavi"},{"first_name":"Johann","last_name":"Austermann","id":"42114","full_name":"Austermann, Johann"},{"last_name":"Borcherding","id":"1693","full_name":"Borcherding, Holger","first_name":"Holger"}],"status":"public","page":"197-202","publication_identifier":{"isbn":["978-3-8007-5359-8"]},"publication":"NEIS 2020 Conference on Sustainable Energy Supply and Energy Storage Systems","date_created":"2022-07-06T09:20:05Z","related_material":{"link":[{"relation":"contains","url":"https://www.vde-verlag.de/buecher/565359/neis-2020.html"}]},"date_updated":"2023-09-22T08:50:26Z","editor":[{"full_name":"Schlz, Detlef","first_name":"Detlef","last_name":"Schlz"}],"language":[{"iso":"eng"}],"publication_status":"published","conference":{"end_date":"202-09-15","start_date":"2020-09-14","name":"NEIS 2020 Conference on Sustainable Energy Supply and Energy Storage Systems","location":"Hamburg"},"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"abstract":[{"lang":"eng","text":"The Paper presents the concept of an experimental plant, which is to be built within the framework of the research project DC-INDUSTRIE2. This system consists of a multitude of electrical drives, various uni- and bidirectional rectifiers, several decentralized energy suppliers and several energy storage units. All devices in this system are coupled via a common DC Grid. DC Grids allow a very simple bidirectional energy exchange between the connected devices. Therefore, braking energy in electric drives, for example, can be used without additional effort and the integration of decentralized energy supplier systems such as photovoltaic (PV) or combined heat and power plants (CHP) as well as energy storage systems is much easier than in AC Grids. The purpose of the experimental plant is to electrically emulate a typical production machine or process and to investigate the real occurring currents and energy flows in the DC Grid. A total of 11 drive sets are available for this purpose, each consisting of a test machine and a load machine. The modeling of the actual production machine is done in MATLAB/Simulink. Speed and torque curves are calculated here and transmitted to the drive inverters via fieldbus. Thus, not only real mechanical quantities are obtained at the shaft, but also the currents in the DC Grid correspond to those of a real plant. Therefore it can be investigated, for example, how a production machine converted from AC to DC power would behave without having to build it. Furthermore, the effects of storage connections and grid disturbances can be realistically investigated."}],"publisher":"VDE Verlag","quality_controlled":"1","type":"conference_editor_article","user_id":"83781","place":"Berlin ; Offenbach","_id":"8439"},{"intvolume":" 9","date_updated":"2023-03-15T13:50:15Z","user_id":"79260","date_created":"2022-07-19T13:55:18Z","type":"scientific_journal_article","publication_identifier":{"issn":["2315-4462"]},"publication":" International Journal of Smart Grid and Clean Energy","doi":"10.12720/sgce.9.1.1-7","_id":"8468","language":[{"iso":"eng"}],"volume":9,"citation":{"ieee":"J. Üpping, F. C. Bollhöfer, and K. A. Forche, “Size of a distributed electrical storage for a rural area with a wind farm,” International Journal of Smart Grid and Clean Energy, vol. 9, no. 1, pp. 1–7, 2020.","apa":"Üpping, J., Bollhöfer, F. C., & Forche, K. A. (2020). Size of a distributed electrical storage for a rural area with a wind farm. International Journal of Smart Grid and Clean Energy, 9(1), 1–7. https://doi.org/10.12720/sgce.9.1.1-7","chicago":"Üpping, Johannes, Fynn Christian Bollhöfer, and Kim Alina Forche. “Size of a Distributed Electrical Storage for a Rural Area with a Wind Farm.” International Journal of Smart Grid and Clean Energy 9, no. 1 (2020): 1–7. https://doi.org/10.12720/sgce.9.1.1-7.","ama":"Üpping J, Bollhöfer FC, Forche KA. Size of a distributed electrical storage for a rural area with a wind farm. International Journal of Smart Grid and Clean Energy. 2020;9(1):1-7. doi:10.12720/sgce.9.1.1-7","van":"Üpping J, Bollhöfer FC, Forche KA. Size of a distributed electrical storage for a rural area with a wind farm. International Journal of Smart Grid and Clean Energy. 2020;9(1):1–7.","mla":"Üpping, Johannes, et al. “Size of a Distributed Electrical Storage for a Rural Area with a Wind Farm.” International Journal of Smart Grid and Clean Energy, vol. 9, no. 1, SGCE Editorial Office, 2020, pp. 1–7, doi:10.12720/sgce.9.1.1-7.","havard":"J. Üpping, F.C. Bollhöfer, K.A. Forche, Size of a distributed electrical storage for a rural area with a wind farm, International Journal of Smart Grid and Clean Energy. 9 (2020) 1–7.","bjps":"Üpping J, Bollhöfer FC and Forche KA (2020) Size of a Distributed Electrical Storage for a Rural Area with a Wind Farm. International Journal of Smart Grid and Clean Energy 9, 1–7.","ufg":"Üpping, Johannes et. al. (2020): Size of a distributed electrical storage for a rural area with a wind farm, in: International Journal of Smart Grid and Clean Energy 9 (1), S. 1–7.","short":"J. Üpping, F.C. Bollhöfer, K.A. Forche, International Journal of Smart Grid and Clean Energy 9 (2020) 1–7.","din1505-2-1":"Üpping, Johannes ; Bollhöfer, Fynn Christian ; Forche, Kim Alina: Size of a distributed electrical storage for a rural area with a wind farm. In: International Journal of Smart Grid and Clean Energy Bd. 9, SGCE Editorial Office (2020), Nr. 1, S. 1–7","chicago-de":"Üpping, Johannes, Fynn Christian Bollhöfer und Kim Alina Forche. 2020. Size of a distributed electrical storage for a rural area with a wind farm. International Journal of Smart Grid and Clean Energy 9, Nr. 1: 1–7. doi:10.12720/sgce.9.1.1-7, ."},"title":"Size of a distributed electrical storage for a rural area with a wind farm","publisher":"SGCE Editorial Office","page":"1-7","status":"public","issue":"1","department":[{"_id":"DEP6020"},{"_id":"DEP5000"},{"_id":"DEP5012"}],"author":[{"last_name":"Üpping","first_name":"Johannes","full_name":"Üpping, Johannes","id":"64760"},{"last_name":"Bollhöfer","id":"71911","full_name":"Bollhöfer, Fynn Christian","first_name":"Fynn Christian"},{"full_name":"Forche, Kim Alina","first_name":"Kim Alina","id":"68963","last_name":"Forche"}],"year":2020},{"page":"388-393","status":"public","department":[{"_id":"DEP6020"},{"_id":"DEP5022"}],"conference":{"end_date":"2020-07-10","start_date":"2020-07-08","name":"14th International Conference on Compatibility, Power Electronics and Power Engineering (IEEE CPE-POWERENG)","location":"Setúbal, Portugal"},"author":[{"first_name":"Martin","id":"52308","last_name":"Griese","full_name":"Griese, Martin"},{"last_name":"Schulte","full_name":"Schulte, Thomas","id":"46242","first_name":"Thomas"}],"year":2020,"publication_status":"published","citation":{"ieee":"M. Griese and T. Schulte, “System reduction of optimal control problems with seasonal storage,” in 2020 IEEE 14th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG), Setúbal, Portugal, 2020, vol. 1, pp. 388–393.","ama":"Griese M, Schulte T. System reduction of optimal control problems with seasonal storage. In: IEEE, ed. 2020 IEEE 14th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG). Vol 1. ; 2020:388-393. doi:10.1109/CPE-POWERENG48600.2020.9161699","chicago":"Griese, Martin, and Thomas Schulte. “System Reduction of Optimal Control Problems with Seasonal Storage.” In 2020 IEEE 14th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG), edited by IEEE, 1:388–93, 2020. https://doi.org/10.1109/CPE-POWERENG48600.2020.9161699.","apa":"Griese, M., & Schulte, T. (2020). System reduction of optimal control problems with seasonal storage. In IEEE (Ed.), 2020 IEEE 14th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG) (Vol. 1, pp. 388–393). Setúbal, Portugal. https://doi.org/10.1109/CPE-POWERENG48600.2020.9161699","mla":"Griese, Martin, and Thomas Schulte. “System Reduction of Optimal Control Problems with Seasonal Storage.” 2020 IEEE 14th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG), edited by IEEE, vol. 1, 2020, pp. 388–93, doi:10.1109/CPE-POWERENG48600.2020.9161699.","bjps":"Griese M and Schulte T (2020) System Reduction of Optimal Control Problems with Seasonal Storage. In IEEE (ed.), 2020 IEEE 14th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG), vol. 1. pp. 388–393.","havard":"M. Griese, T. Schulte, System reduction of optimal control problems with seasonal storage, in: IEEE (Ed.), 2020 IEEE 14th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG), 2020: pp. 388–393.","ufg":"Griese, Martin/Schulte, Thomas (2020): System reduction of optimal control problems with seasonal storage, in: IEEE (Hg.): 2020 IEEE 14th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG) (= 1), S. 388–393.","van":"Griese M, Schulte T. System reduction of optimal control problems with seasonal storage. In: IEEE, editor. 2020 IEEE 14th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG). 2020. p. 388–93.","din1505-2-1":"Griese, Martin ; Schulte, Thomas: System reduction of optimal control problems with seasonal storage. In: IEEE (Hrsg.): 2020 IEEE 14th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG). Bd. 1, 2020, S. 388–393","chicago-de":"Griese, Martin und Thomas Schulte. 2020. System reduction of optimal control problems with seasonal storage. In: 2020 IEEE 14th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG), hg. von IEEE, 1:388–393. doi:10.1109/CPE-POWERENG48600.2020.9161699, .","short":"M. Griese, T. Schulte, in: IEEE (Ed.), 2020 IEEE 14th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG), 2020, pp. 388–393."},"volume":1,"title":"System reduction of optimal control problems with seasonal storage","doi":"10.1109/CPE-POWERENG48600.2020.9161699","_id":"8712","language":[{"iso":"eng"}],"intvolume":" 1","corporate_editor":["IEEE"],"date_updated":"2023-03-15T13:50:15Z","user_id":"79260","date_created":"2022-08-12T11:29:41Z","type":"conference","publication_identifier":{"eisbn":["978-1-7281-4218-0"]},"publication":"2020 IEEE 14th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG)"},{"citation":{"van":"Pottgiesser U, Jaschke F, Melenhorst M. 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? Lemgo; 2020. 80 p.","ufg":"Pottgiesser, Uta et. al. (2020): 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today?, Lemgo.","mla":"Pottgiesser, Uta, et al. 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? 2020, doi:10.25644/n4qq-q019.","bjps":"Pottgiesser U, Jaschke F and Melenhorst M (2020) 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? Lemgo.","havard":"U. Pottgiesser, F. Jaschke, M. Melenhorst, 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today?, Lemgo, 2020.","apa":"Pottgiesser, U., Jaschke, F., & Melenhorst, M. (2020). 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? Lemgo. https://doi.org/10.25644/n4qq-q019","chicago":"Pottgiesser, Uta, Franz Jaschke, and Michael Melenhorst. 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? Lemgo, 2020. https://doi.org/10.25644/n4qq-q019.","short":"U. Pottgiesser, F. Jaschke, M. Melenhorst, 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today?, Lemgo, 2020.","din1505-2-1":"Pottgiesser, Uta ; Jaschke, Franz ; Melenhorst, Michael: 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? Lemgo, 2020","chicago-de":"Pottgiesser, Uta, Franz Jaschke und Michael Melenhorst. 2020. 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? Lemgo. doi:10.25644/n4qq-q019, .","ama":"Pottgiesser U, Jaschke F, Melenhorst M. 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? Lemgo; 2020. doi:10.25644/n4qq-q019","ieee":"U. Pottgiesser, F. Jaschke, and M. Melenhorst, 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? Lemgo, 2020."},"title":"100 Years Bauhaus. What Interest Do We Take In Modern Movement Today?","status":"public","page":"80","year":2020,"author":[{"first_name":"Uta","id":"27166","full_name":"Pottgiesser, Uta","last_name":"Pottgiesser","orcid":"0000-0002-8594-3168"},{"last_name":"Jaschke","first_name":"Franz","full_name":"Jaschke, Franz"},{"first_name":"Michael","full_name":"Melenhorst, Michael","id":"51438","last_name":"Melenhorst"}],"file_date_updated":"2021-02-19T13:27:25Z","date_updated":"2023-03-15T13:49:47Z","related_material":{"record":[{"relation":"other","status":"public","id":"1101"}]},"publication_identifier":{"isbn":["978-3-939349-34-1"]},"date_created":"2020-10-02T09:01:10Z","language":[{"iso":"eng"}],"oa":"1","file":[{"file_size":50741762,"file_id":"5022","content_type":"application/pdf","file_name":"210219 Published_BookPub_100 YEARS BAUHAUS.pdf","date_created":"2021-02-19T13:27:25Z","date_updated":"2021-02-19T13:27:25Z","creator":"hka-zn8","relation":"main_file","success":1,"access_level":"open_access"}],"publication_status":"published","abstract":[{"text":"In 2019 DOCOMOMO Germany and the Detmold School of Architecture and Interior Architecture at Ostwestfalen-Lippe, University of Applied Sciences (TH OWL)\r\n\r\nwith the Erasmus+-Project ‘Reuse of Modernist Buildings‘ (RMB) organized the 16th DOCOMOMO Germany and 3rd RMB Conference. The international conference\r\n\r\nin Berlin took place on the occasion of the 100th anniversary of the Bauhaus and as an opportunity to discuss the significance of modernity in the 21st century.\r\n\r\nThe conference focus lies on the concepts, visions, and impulses emanating from Modern Movement and how they can be related to today’s social, economic, cultural\r\n\r\nand in particular creative issues.\r\n\r\nThis second Docomomo publication includes a selection of eleven papers that were not included in the original online conference proceedings (http://www.rmb-eu.\r\n\r\ncom/publications/). The papers witness in a particular way the dominating themes and typologies of Modern Movement. They also demonstrate manifold reuse and\r\n\r\nconservation approaches—conceptually, aesthetically and technically. They are expression of the intensive investigation and documentation efforts of members and\r\n\r\nsupporters of DOCOMOMO together with the academic and professional community. ","lang":"eng"}],"ddc":["720"],"department":[{"_id":"DEP1000"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"user_id":"45673","type":"book","_id":"3634","doi":"10.25644/n4qq-q019","place":"Lemgo","has_accepted_license":"1"},{"has_accepted_license":"1","place":"Lemgo","_id":"3799","doi":"10.25644/J4D2-6227","type":"book_chapter","user_id":"45673","ddc":["720"],"department":[{"_id":"DEP1301"},{"_id":"DEP1000"},{"_id":"DEP1055"}],"abstract":[{"text":"Obsolescence and urban decay are usual attributes of the Modern Movement buildings and areas worldwide, especially of the post-war large-scale housing settlements. Therefore, the question of reuse and improvement guidelines for these settlements is becoming increasingly important. The paper addresses this issue, taking New Belgrade housing blocks as a case study. The current condition of the New Belgrade blocks that, indeed, can be characterised as obsolete and not adequately maintained, even degraded, is nevertheless a perfect platform for reading of the architecture and the space values, and how it was changing during the time. The study aim was reading the unforeseen impulses of modernism: identification and mapping of socio-spatial relations in environment (reactions on and interventions in space that were generated during the time), reading and interpreting them as impulses of the user behaviours and lifestyles, and further proposing future transformation tactics using the mapped elements and principles. The research framework was a workshop-seminar organized by the authors at the Faculty of Architecture in Belgrade. Using this research tactic, the particular elements and spaces within the blocks were mapped, identified, classified and systematized according to their flexibility to react and accept contemporary impulses of life. The study reveals common spaces of the New Belgrade blocks, or spaces between private and public, as the key elements in managing the urban decay and prompting adaptation, and hence investigates on the potential of their adaptive reuse initiating transformation of the whole area, and further achieving its attractiveness, openness and better accessibility. ","lang":"eng"}],"publisher":"Technische Hochschule Ostwestfalen-Lippe","publication_status":"published","file":[{"file_name":"100_YEARS_BAUHAUS_AD_Unforeseen Impulses of Modernism - the Case of New Belgrade Blocks.pdf","content_type":"application/pdf","date_created":"2020-11-03T10:14:01Z","file_id":"3804","file_size":4101328,"relation":"main_file","creator":"5bw-b6d","date_updated":"2020-11-03T10:14:01Z","access_level":"open_access","success":1}],"oa":"1","language":[{"iso":"eng"}],"publication":"100 YEARS BAUHAUS: What interest do we take in Modern Movement today?","date_created":"2020-11-03T10:16:11Z","date_updated":"2023-03-15T13:49:48Z","editor":[{"orcid":"0000-0002-8594-3168","id":"27166","last_name":"Pottgiesser","first_name":"Uta","full_name":"Pottgiesser, Uta"},{"first_name":"Franz","last_name":"Jaschke","full_name":"Jaschke, Franz"},{"last_name":"Melenhorst","id":"51438","full_name":"Melenhorst, Michel","first_name":"Michel"}],"file_date_updated":"2020-11-03T10:14:01Z","year":2020,"author":[{"id":"68875","first_name":"Anica","full_name":"Dragutinovic, Anica","last_name":"Dragutinovic","orcid":"0000-0002-6962-5223"},{"first_name":"Ana","full_name":"Nikezic, Ana","last_name":"Nikezic"}],"status":"public","page":" 32-45","title":"Unforeseen Impulses of Modernism: The Case of New Belgrade Blocks","citation":{"apa":"Dragutinovic, A., & Nikezic, A. (2020). Unforeseen Impulses of Modernism: The Case of New Belgrade Blocks. In U. Pottgiesser, F. Jaschke, & M. Melenhorst (Eds.), 100 YEARS BAUHAUS: What interest do we take in Modern Movement today? (pp. 32–45). Lemgo: Technische Hochschule Ostwestfalen-Lippe. https://doi.org/10.25644/J4D2-6227","chicago":"Dragutinovic, Anica, and Ana Nikezic. “Unforeseen Impulses of Modernism: The Case of New Belgrade Blocks.” In 100 YEARS BAUHAUS: What Interest Do We Take in Modern Movement Today?, edited by Uta Pottgiesser, Franz Jaschke, and Michel Melenhorst, 32–45. Lemgo: Technische Hochschule Ostwestfalen-Lippe, 2020. https://doi.org/10.25644/J4D2-6227.","van":"Dragutinovic A, Nikezic A. Unforeseen Impulses of Modernism: The Case of New Belgrade Blocks. In: Pottgiesser U, Jaschke F, Melenhorst M, editors. 100 YEARS BAUHAUS: What interest do we take in Modern Movement today? Lemgo: Technische Hochschule Ostwestfalen-Lippe; 2020. p. 32–45.","ufg":"Dragutinovic, Anica/Nikezic, Ana (2020): Unforeseen Impulses of Modernism: The Case of New Belgrade Blocks, in: Uta Pottgiesser et. al. (Hgg.): 100 YEARS BAUHAUS: What interest do we take in Modern Movement today?, Lemgo, S. 32–45.","bjps":"Dragutinovic A and Nikezic A (2020) Unforeseen Impulses of Modernism: The Case of New Belgrade Blocks. In Pottgiesser U, Jaschke F and Melenhorst M (eds), 100 YEARS BAUHAUS: What Interest Do We Take in Modern Movement Today? Lemgo: Technische Hochschule Ostwestfalen-Lippe, pp. 32–45.","mla":"Dragutinovic, Anica, and Ana Nikezic. “Unforeseen Impulses of Modernism: The Case of New Belgrade Blocks.” 100 YEARS BAUHAUS: What Interest Do We Take in Modern Movement Today?, edited by Uta Pottgiesser et al., Technische Hochschule Ostwestfalen-Lippe, 2020, pp. 32–45, doi:10.25644/J4D2-6227.","havard":"A. Dragutinovic, A. Nikezic, Unforeseen Impulses of Modernism: The Case of New Belgrade Blocks, in: U. Pottgiesser, F. Jaschke, M. Melenhorst (Eds.), 100 YEARS BAUHAUS: What Interest Do We Take in Modern Movement Today?, Technische Hochschule Ostwestfalen-Lippe, Lemgo, 2020: pp. 32–45.","short":"A. Dragutinovic, A. Nikezic, in: U. Pottgiesser, F. Jaschke, M. Melenhorst (Eds.), 100 YEARS BAUHAUS: What Interest Do We Take in Modern Movement Today?, Technische Hochschule Ostwestfalen-Lippe, Lemgo, 2020, pp. 32–45.","din1505-2-1":"Dragutinovic, Anica ; Nikezic, Ana: Unforeseen Impulses of Modernism: The Case of New Belgrade Blocks. In: Pottgiesser, U. ; Jaschke, F. ; Melenhorst, M. (Hrsg.): 100 YEARS BAUHAUS: What interest do we take in Modern Movement today?. Lemgo : Technische Hochschule Ostwestfalen-Lippe, 2020, S. 32–45","chicago-de":"Dragutinovic, Anica und Ana Nikezic. 2020. Unforeseen Impulses of Modernism: The Case of New Belgrade Blocks. In: 100 YEARS BAUHAUS: What interest do we take in Modern Movement today?, hg. von Uta Pottgiesser, Franz Jaschke, und Michel Melenhorst, 32–45. Lemgo: Technische Hochschule Ostwestfalen-Lippe. doi:10.25644/J4D2-6227, .","ieee":"A. Dragutinovic and A. Nikezic, “Unforeseen Impulses of Modernism: The Case of New Belgrade Blocks,” in 100 YEARS BAUHAUS: What interest do we take in Modern Movement today?, U. Pottgiesser, F. Jaschke, and M. Melenhorst, Eds. Lemgo: Technische Hochschule Ostwestfalen-Lippe, 2020, pp. 32–45.","ama":"Dragutinovic A, Nikezic A. Unforeseen Impulses of Modernism: The Case of New Belgrade Blocks. In: Pottgiesser U, Jaschke F, Melenhorst M, eds. 100 YEARS BAUHAUS: What Interest Do We Take in Modern Movement Today?. Lemgo: Technische Hochschule Ostwestfalen-Lippe; 2020:32-45. doi:10.25644/J4D2-6227"}},{"has_accepted_license":"1","_id":"5730","place":"Detmold","type":"journal_article","user_id":"65039","popular_science":"1","issue":"6","ddc":["050"],"department":[{"_id":"DEP1303"},{"_id":"DEP1055"}],"publisher":"Technische Hochschule Ostwestfalen-Lippe","file":[{"access_level":"open_access","success":1,"relation":"main_file","creator":"edu-dd0","date_updated":"2021-05-02T12:09:03Z","file_id":"5775","file_size":1645842,"date_created":"2021-05-02T12:09:03Z","file_name":"Editorial Mehr als Provinz.pdf","content_type":"application/pdf"}],"publication_status":"published","oa":"1","language":[{"iso":"ger"}],"publication_identifier":{"issn":["2566-8900"]},"publication":"urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung","date_created":"2021-04-30T12:41:36Z","file_date_updated":"2021-05-02T12:09:03Z","date_updated":"2023-03-15T13:50:01Z","main_file_link":[{"url":"https://www.yumpu.com/de/document/read/63573359/urbanlab-magazin-2020-mehr-als-provinz","open_access":"1"}],"author":[{"orcid":"0000-0002-8841-9345","first_name":"Marcel","last_name":"Cardinali","full_name":"Cardinali, Marcel","id":"58462"},{"last_name":"Hall","first_name":"Oliver","id":"27136","full_name":"Hall, Oliver"}],"year":2020,"status":"public","page":"3","title":"Mehr als Provinz (Editorial)","citation":{"ufg":"Cardinali, Marcel/Hall, Oliver (2020): Mehr als Provinz (Editorial), in: urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung (6), S. 3.","havard":"M. Cardinali, O. Hall, Mehr als Provinz (Editorial), urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. (2020) 3.","bjps":"Cardinali M and Hall O (2020) Mehr als Provinz (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung 3.","mla":"Cardinali, Marcel, and Oliver Hall. “Mehr als Provinz (Editorial).” urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 6, Technische Hochschule Ostwestfalen-Lippe, 2020, p. 3.","van":"Cardinali M, Hall O. Mehr als Provinz (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. 2020;(6):3.","ama":"Cardinali M, Hall O. Mehr als Provinz (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. 2020;(6):3.","chicago":"Cardinali, Marcel, and Oliver Hall. “Mehr als Provinz (Editorial).” urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 6 (2020): 3.","apa":"Cardinali, M., & Hall, O. (2020). Mehr als Provinz (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, (6), 3.","ieee":"M. Cardinali and O. Hall, “Mehr als Provinz (Editorial),” urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 6, p. 3, 2020.","chicago-de":"Cardinali, Marcel und Oliver Hall. 2020. Mehr als Provinz (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, Nr. 6: 3.","din1505-2-1":"Cardinali, Marcel ; Hall, Oliver: Mehr als Provinz (Editorial). In: urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. Detmold, Technische Hochschule Ostwestfalen-Lippe (2020), Nr. 6, S. 3","short":"M. Cardinali, O. Hall, urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung (2020) 3."}},{"place":"Aachen","_id":"5738","user_id":"45673","intvolume":" 8","type":"conference","quality_controlled":"1","publisher":"REALCORP","department":[{"_id":"DEP1303"},{"_id":"DEP1055"}],"conference":{"start_date":"2020-09-15","end_date":"2020-09-18","name":"REAL CORP 2020: Shaping urban change - livable city regions for the 21st century","location":"Aachen (digital)"},"abstract":[{"lang":"ger","text":"Städte befinden sich in einem stetigen Transformationsprozess und aktuell rückt die Kreativwirtschaft als Schlüsselbereich und Innovationsmotor für die Gesamtwirtschaft vermehrt auch in das Blickfeld der Stadtentwicklung. Während dieses Themenfeld in Metropolen und Großstädten schon mehrfach städtebaulich und wissenschaftlich untersucht wurde, besteht in Mittelstädten noch Forschungsbedarf. Die zugrundeliegende Forschungsarbeit „Potenzialstudie Kreativ Quartier Detmold“ hatte das Ziel Erfolgschancen, Potenziale, Herausforderungen und Anforderungen an die (Weiter-) Entwicklung der Kultur- und Kreativwirtschaft in der typischen Mittelstadt Detmold und ihrer Bedeutung in einer polyzentralen Region zu untersuchen. Hierfür wurde ein Methodenmix angewendet, der sich in Form einer Umfrage mit den Anforderungen der Akteure auseinandersetzt; den Stadtentwicklungsprozess zweier erfolgreicher Fallstudien untersucht; Detmold städtebaulich auf geeignete Orte zur Ansiedlung von Kreativen analysiert und schließlich in Szenarien vergleichend bewertet. Im Ergebnis zeigt sich, dass die Kultur- und Kreativwirtschaft der Mittelstadt Detmold ein starkes Bedürfnis hat sich zu vernetzen und insgesamt mehr wahrgenommen zu werden. Es zeigen sich starke Wertschöpfungsketten untereinander und besondere Anknüpfungspotenziale im Umfeld von Hochschulen. Die räumliche Analyse offenbart, dass auch in einer Mittelstadt wie Detmold ausreichend Potenzialräume vorhanden sind. Gleichwohl existiert nicht ausreichend Eigendynamik, dass sich diese Räume selbst und in verdichteter Form entwickeln. Das kreative Potenzial ist also auch in Mittelstädten vorhanden. Es braucht aber gerade in einer Mittelstadt einen gesteuerten Stadtentwicklungsprozess der zusammen mit Förderimpulsen gezielt Entwicklungen in diese Richtung stimuliert.\r\n\r\nZweitveröffentlichung im urbanLab Magazin (6) Mehr als Provinz, 2020, 62-75"}],"publication_status":"published","language":[{"iso":"ger"}],"keyword":["Innovationsmotor","Kreativquartier","Kreativwirtschaft","Mittelstadt","Stadtentwicklung"],"oa":"1","date_updated":"2023-03-15T13:50:01Z","corporate_editor":["REAL CORP"],"date_created":"2021-04-30T12:41:49Z","publication_identifier":{"isbn":["9783950417388"]},"publication":"REAL CORP 2020: Shaping urban change - livable city regions for the 21st century: proceedings of the 25th International Conference on Urban Planning, Regional Development and Information Society : 15-18 September 2020","page":"345-354","status":"public","year":2020,"main_file_link":[{"url":"https://www.corp.at/fileadmin/proceedings/CORP2020_proceedings.pdf","open_access":"1"}],"author":[{"last_name":"Cardinali","first_name":"Marcel","full_name":"Cardinali, Marcel","id":"58462","orcid":"0000-0002-8841-9345"},{"full_name":"Hall, Oliver","first_name":"Oliver","id":"27136","last_name":"Hall"}],"citation":{"ama":"Cardinali M, Hall O. Forschung, Bildung und Transfer in der Kreativwirtschaft von Klein- und Mittelstädten. In: REAL CORP, ed. REAL CORP 2020: Shaping urban change - livable city regions for the 21st century: proceedings of the 25th International Conference on Urban Planning, Regional Development and Information Society : 15-18 September 2020. Vol 8. Aachen: REALCORP; 2020:345-354.","ieee":"M. Cardinali and O. Hall, “Forschung, Bildung und Transfer in der Kreativwirtschaft von Klein- und Mittelstädten,” in REAL CORP 2020: Shaping urban change - livable city regions for the 21st century: proceedings of the 25th International Conference on Urban Planning, Regional Development and Information Society : 15-18 September 2020, Aachen (digital), 2020, vol. 8, pp. 345–354.","chicago-de":"Cardinali, Marcel und Oliver Hall. 2020. Forschung, Bildung und Transfer in der Kreativwirtschaft von Klein- und Mittelstädten. In: REAL CORP 2020: Shaping urban change - livable city regions for the 21st century: proceedings of the 25th International Conference on Urban Planning, Regional Development and Information Society : 15-18 September 2020, hg. von REAL CORP, 8:345–354. Aachen: REALCORP.","din1505-2-1":"Cardinali, Marcel ; Hall, Oliver: Forschung, Bildung und Transfer in der Kreativwirtschaft von Klein- und Mittelstädten. In: REAL CORP (Hrsg.): REAL CORP 2020: Shaping urban change - livable city regions for the 21st century: proceedings of the 25th International Conference on Urban Planning, Regional Development and Information Society : 15-18 September 2020. Bd. 8. Aachen : REALCORP, 2020, S. 345–354","short":"M. Cardinali, O. Hall, in: REAL CORP (Ed.), REAL CORP 2020: Shaping urban change - livable city regions for the 21st century: proceedings of the 25th International Conference on Urban Planning, Regional Development and Information Society : 15-18 September 2020, REALCORP, Aachen, 2020, pp. 345–354.","ufg":"Cardinali, Marcel/Hall, Oliver (2020): Forschung, Bildung und Transfer in der Kreativwirtschaft von Klein- und Mittelstädten, in: REAL CORP (Hg.): REAL CORP 2020: Shaping urban change - livable city regions for the 21st century: proceedings of the 25th International Conference on Urban Planning, Regional Development and Information Society : 15-18 September 2020 (= 8), Aachen, S. 345–354.","bjps":"Cardinali M and Hall O (2020) Forschung, Bildung und Transfer in der Kreativwirtschaft von Klein- und Mittelstädten. In REAL CORP (ed.), REAL CORP 2020: Shaping urban change - livable city regions for the 21st century: proceedings of the 25th International Conference on Urban Planning, Regional Development and Information Society : 15-18 September 2020, vol. 8. Aachen: REALCORP, pp. 345–354.","havard":"M. Cardinali, O. Hall, Forschung, Bildung und Transfer in der Kreativwirtschaft von Klein- und Mittelstädten, in: REAL CORP (Ed.), REAL CORP 2020: Shaping urban change - livable city regions for the 21st century: proceedings of the 25th International Conference on Urban Planning, Regional Development and Information Society : 15-18 September 2020, REALCORP, Aachen, 2020: pp. 345–354.","mla":"Cardinali, Marcel, and Oliver Hall. “Forschung, Bildung und Transfer in der Kreativwirtschaft von Klein- und Mittelstädten.” REAL CORP 2020: Shaping urban change - livable city regions for the 21st century: proceedings of the 25th International Conference on Urban Planning, Regional Development and Information Society : 15-18 September 2020, edited by REAL CORP, vol. 8, REALCORP, 2020, pp. 345–54.","van":"Cardinali M, Hall O. Forschung, Bildung und Transfer in der Kreativwirtschaft von Klein- und Mittelstädten. In: REAL CORP, editor. REAL CORP 2020: Shaping urban change - livable city regions for the 21st century: proceedings of the 25th International Conference on Urban Planning, Regional Development and Information Society : 15-18 September 2020. Aachen: REALCORP; 2020. p. 345–54.","chicago":"Cardinali, Marcel, and Oliver Hall. “Forschung, Bildung und Transfer in der Kreativwirtschaft von Klein- und Mittelstädten.” In REAL CORP 2020: Shaping urban change - livable city regions for the 21st century: proceedings of the 25th International Conference on Urban Planning, Regional Development and Information Society : 15-18 September 2020, edited by REAL CORP, 8:345–54. Aachen: REALCORP, 2020.","apa":"Cardinali, M., & Hall, O. (2020). Forschung, Bildung und Transfer in der Kreativwirtschaft von Klein- und Mittelstädten. In REAL CORP (Ed.), REAL CORP 2020: Shaping urban change - livable city regions for the 21st century: proceedings of the 25th International Conference on Urban Planning, Regional Development and Information Society : 15-18 September 2020 (Vol. 8, pp. 345–354). Aachen: REALCORP."},"volume":8,"title":"Forschung, Bildung und Transfer in der Kreativwirtschaft von Klein- und Mittelstädten"},{"publication_status":"published","quality_controlled":"1","publisher":"CORP - Competence Center of Urban and Regional Planning ","abstract":[{"text":"Das Projekt STEMPICOM stellt ein Vorkonzept dar, wie eine raum-zeitliche Intelligenz für einen gemeinschaftsbasierte Lieferdienst nutzbringend umgesetzt werden kann. Es wurden die potenziellen Akteure identifiziert und Probleme der traditionellen Routing- und Zustellprozesse analysiert. Auf Basis dieser Ergebnisse wurde die Umsetzung eines neuen Routing- und Zustellkonzepts entwickelt. Das in diesem Projekt vorgestellte Routing-Konzept könnte im Wesentlichen als eine Programmerweiterung für sogenannte letzte Meile Apps verwendet werden. Zur prototypischen Umsetzung dieser Geodateninfrastruktur wird aktuell eine Antragstellung für die zweite Phase der mFUND-Förderlinie in Erwägung gezogen. Darüber hinaus erarbeitet der Forschungsschwerpunkt nextPlace eine Projektskizze im Rahmen der BMVI-Förderrichtlinie „Städtische Logistik“ in Kooperation mit dem Fraunhofer Institut IOSB-INA, Lemgo und dem Fraunhofer Innovationslabor „LemgoDigital“ zur Implementierung des Routings in eine städtische Liefer-Infrastruktur. Aus den bisherigen Voruntersuchungen wurde deutlich, dass sich gerade in ländlichen Räumen digitale, app-basierte Geschäftsmodelle nicht in gleicher Selbstverständlichkeit umsetzen lassen, wie man es ggf. aus Metropolräumen gewohnt ist. Vielmehr spielen alltägliche, raum-zeitliche Rahmenbedingungen eine wesentliche Rolle, die es bei der technologischen Entwicklung und unternehmerischen Vermarktung zu berücksichtigen gilt. ","lang":"ger"}],"department":[{"_id":"DEP1055"},{"_id":"DEP1025"},{"_id":"DEP1028"}],"conference":{"location":"Wien","name":"25th International Conference on Urban Planning, Regional Development and Information Society ","end_date":"2020-09-18","start_date":"2020-09-15"},"user_id":"83781","type":"conference","_id":"5760","place":"Schwechat","citation":{"chicago-de":"Fillies, Alexander, Maren Pöttker, Axel Häusler, Dorina Kranzmann, Laura Rabea Bremenkamp und Florian Hoedt. 2020. STEMPICOM – Geodatenkonzept für gemeinschaftsbasierte Lieferdienste in ländlichen Regionen . In: Real Corp 2020: Shaping urban change livable city regions for the 21st century: proceedings of 25th International Conference on Urban Planning, Regional Development and Information Society : Tagungsband : 15-18 September 2020, virtual conference, hg. von Manfred Schrenk, Vasily V. Popovich , Peter Zeile, Pietro Elisei, Clemens Beyer, Judith Ryser, Christa Reicher, Canan Çelik, und CORP – Competence Center of Urban and Regional Planning, 811–820. Schwechat: CORP - Competence Center of Urban and Regional Planning .","din1505-2-1":"Fillies, Alexander ; Pöttker, Maren ; Häusler, Axel ; Kranzmann, Dorina ; Bremenkamp, Laura Rabea ; Hoedt, Florian: STEMPICOM – Geodatenkonzept für gemeinschaftsbasierte Lieferdienste in ländlichen Regionen . In: Schrenk, M. ; Popovich , V. V. ; Zeile, P. ; Elisei, P. ; Beyer, C. ; Ryser, J. ; Reicher, C. ; Çelik, C. ; u. a. (Hrsg.): Real Corp 2020: Shaping urban change livable city regions for the 21st century: proceedings of 25th International Conference on Urban Planning, Regional Development and Information Society : Tagungsband : 15-18 September 2020, virtual conference. Schwechat : CORP - Competence Center of Urban and Regional Planning , 2020, S. 811–820","short":"A. Fillies, M. Pöttker, A. Häusler, D. Kranzmann, L.R. Bremenkamp, F. Hoedt, in: M. Schrenk, V.V. Popovich , P. Zeile, P. Elisei, C. Beyer, J. Ryser, C. Reicher, C. Çelik, CORP – Competence Center of Urban and Regional Planning (Eds.), Real Corp 2020: Shaping urban change livable city regions for the 21st century: proceedings of 25th International Conference on Urban Planning, Regional Development and Information Society : Tagungsband : 15-18 September 2020, virtual conference, CORP - Competence Center of Urban and Regional Planning , Schwechat, 2020, pp. 811–820.","chicago":"Fillies, Alexander, Maren Pöttker, Axel Häusler, Dorina Kranzmann, Laura Rabea Bremenkamp, and Florian Hoedt. “STEMPICOM – Geodatenkonzept für gemeinschaftsbasierte Lieferdienste in ländlichen Regionen .” In Real Corp 2020: Shaping urban change livable city regions for the 21st century: proceedings of 25th International Conference on Urban Planning, Regional Development and Information Society : Tagungsband : 15-18 September 2020, virtual conference, edited by Manfred Schrenk, Vasily V. Popovich , Peter Zeile, Pietro Elisei, Clemens Beyer, Judith Ryser, Christa Reicher, Canan Çelik, and CORP – Competence Center of Urban and Regional Planning, 811–20. Schwechat: CORP - Competence Center of Urban and Regional Planning , 2020.","apa":"Fillies, A., Pöttker, M., Häusler, A., Kranzmann, D., Bremenkamp, L. R., & Hoedt, F. (2020). STEMPICOM – Geodatenkonzept für gemeinschaftsbasierte Lieferdienste in ländlichen Regionen . In M. Schrenk, V. V. Popovich , P. Zeile, P. Elisei, C. Beyer, J. Ryser, C. Reicher, C. Çelik, & CORP – Competence Center of Urban and Regional Planning (Eds.), Real Corp 2020: Shaping urban change livable city regions for the 21st century: proceedings of 25th International Conference on Urban Planning, Regional Development and Information Society : Tagungsband : 15-18 September 2020, virtual conference (pp. 811–820). CORP - Competence Center of Urban and Regional Planning .","ufg":"Fillies, Alexander u. a.: STEMPICOM – Geodatenkonzept für gemeinschaftsbasierte Lieferdienste in ländlichen Regionen , in: Schrenk, Manfred u. a. (Hgg.): Real Corp 2020: Shaping urban change livable city regions for the 21st century: proceedings of 25th International Conference on Urban Planning, Regional Development and Information Society : Tagungsband : 15-18 September 2020, virtual conference, Schwechat 2020, S. 811–820.","bjps":"Fillies A et al. (2020) STEMPICOM – Geodatenkonzept für gemeinschaftsbasierte Lieferdienste in ländlichen Regionen . In Schrenk M et al. (eds), Real Corp 2020: Shaping urban change livable city regions for the 21st century: proceedings of 25th International Conference on Urban Planning, Regional Development and Information Society : Tagungsband : 15-18 September 2020, virtual conference. Schwechat: CORP - Competence Center of Urban and Regional Planning , pp. 811–820.","havard":"A. Fillies, M. Pöttker, A. Häusler, D. Kranzmann, L.R. Bremenkamp, F. Hoedt, STEMPICOM – Geodatenkonzept für gemeinschaftsbasierte Lieferdienste in ländlichen Regionen , in: M. Schrenk, V.V. Popovich , P. Zeile, P. Elisei, C. Beyer, J. Ryser, C. Reicher, C. Çelik, CORP – Competence Center of Urban and Regional Planning (Eds.), Real Corp 2020: Shaping urban change livable city regions for the 21st century: proceedings of 25th International Conference on Urban Planning, Regional Development and Information Society : Tagungsband : 15-18 September 2020, virtual conference, CORP - Competence Center of Urban and Regional Planning , Schwechat, 2020: pp. 811–820.","mla":"Fillies, Alexander, et al. “STEMPICOM – Geodatenkonzept für gemeinschaftsbasierte Lieferdienste in ländlichen Regionen .” Real Corp 2020: Shaping urban change livable city regions for the 21st century: proceedings of 25th International Conference on Urban Planning, Regional Development and Information Society : Tagungsband : 15-18 September 2020, virtual conference, edited by Manfred Schrenk et al., CORP - Competence Center of Urban and Regional Planning , 2020, pp. 811–20.","van":"Fillies A, Pöttker M, Häusler A, Kranzmann D, Bremenkamp LR, Hoedt F. STEMPICOM – Geodatenkonzept für gemeinschaftsbasierte Lieferdienste in ländlichen Regionen . In: Schrenk M, Popovich VV, Zeile P, Elisei P, Beyer C, Ryser J, et al., editors. Real Corp 2020: Shaping urban change livable city regions for the 21st century: proceedings of 25th International Conference on Urban Planning, Regional Development and Information Society : Tagungsband : 15-18 September 2020, virtual conference. Schwechat: CORP - Competence Center of Urban and Regional Planning ; 2020. p. 811–20.","ieee":"A. Fillies, M. Pöttker, A. Häusler, D. Kranzmann, L. R. Bremenkamp, and F. Hoedt, “STEMPICOM – Geodatenkonzept für gemeinschaftsbasierte Lieferdienste in ländlichen Regionen ,” in Real Corp 2020: Shaping urban change livable city regions for the 21st century: proceedings of 25th International Conference on Urban Planning, Regional Development and Information Society : Tagungsband : 15-18 September 2020, virtual conference, Wien, 2020, pp. 811–820.","ama":"Fillies A, Pöttker M, Häusler A, Kranzmann D, Bremenkamp LR, Hoedt F. STEMPICOM – Geodatenkonzept für gemeinschaftsbasierte Lieferdienste in ländlichen Regionen . In: Schrenk M, Popovich VV, Zeile P, et al., eds. Real Corp 2020: Shaping urban change livable city regions for the 21st century: proceedings of 25th International Conference on Urban Planning, Regional Development and Information Society : Tagungsband : 15-18 September 2020, virtual conference. CORP - Competence Center of Urban and Regional Planning ; 2020:811-820."},"title":"STEMPICOM – Geodatenkonzept für gemeinschaftsbasierte Lieferdienste in ländlichen Regionen ","page":"811-820","status":"public","author":[{"full_name":"Fillies, Alexander","last_name":"Fillies","id":"61591","first_name":"Alexander"},{"full_name":"Pöttker, Maren ","last_name":"Pöttker","first_name":"Maren "},{"orcid":"0009-0001-8565-8199","first_name":"Axel","last_name":"Häusler","full_name":"Häusler, Axel","id":"61520"},{"first_name":"Dorina","id":"64639","last_name":"Kranzmann","full_name":"Kranzmann, Dorina"},{"full_name":"Bremenkamp, Laura Rabea","first_name":"Laura Rabea","last_name":"Bremenkamp","id":"74264"},{"full_name":"Hoedt, Florian","first_name":"Florian","last_name":"Hoedt"}],"main_file_link":[{"url":"https://conference.corp.at/fileadmin/proceedings/CORP2020_proceedings.pdf","open_access":"1"}],"year":"2020","editor":[{"first_name":"Manfred","full_name":"Schrenk, Manfred","last_name":"Schrenk"},{"last_name":"Popovich ","first_name":"Vasily V.","full_name":"Popovich , Vasily V."},{"full_name":"Zeile, Peter","first_name":"Peter","last_name":"Zeile"},{"first_name":"Pietro","full_name":"Elisei, Pietro","last_name":"Elisei"},{"last_name":"Beyer","first_name":"Clemens","full_name":"Beyer, Clemens"},{"first_name":"Judith","full_name":"Ryser, Judith","last_name":"Ryser"},{"last_name":"Reicher","first_name":"Christa","full_name":"Reicher, Christa"},{"last_name":"Çelik","full_name":"Çelik, Canan","first_name":"Canan"}],"corporate_editor":["CORP – Competence Center of Urban and Regional Planning"],"date_updated":"2024-12-04T12:57:48Z","date_created":"2021-04-30T17:55:37Z","publication_identifier":{"isbn":["978-3-9504173-9-5"],"eissn":["2521-3938"],"issn":["2521-392X"],"unknown":["978-3-9504173-8-8"]},"publication":"Real Corp 2020: Shaping urban change livable city regions for the 21st century: proceedings of 25th International Conference on Urban Planning, Regional Development and Information Society : Tagungsband : 15-18 September 2020, virtual conference","language":[{"iso":"ger"}],"keyword":["Logistik","Ländliche Räume","Geodateninfrastrukturen","Gemeinschaftsdienste","Routing"],"oa":"1"},{"_id":"5893","language":[{"iso":"eng"}],"publication":"Detmold Conference Week","date_created":"2021-05-14T08:38:07Z","type":"conference","user_id":"83781","related_material":{"link":[{"url":"https://www.detmoldconferenceweek.online","relation":"original"}]},"date_updated":"2024-12-04T12:59:07Z","author":[{"full_name":"Häusler, Axel","id":"61520","first_name":"Axel","last_name":"Häusler","orcid":"0009-0001-8565-8199"},{"id":"75372","first_name":"Carsten","full_name":"Oldenburg, Carsten","last_name":"Oldenburg"},{"id":"74454","first_name":"Christopher","full_name":"Kintrup, Christopher","last_name":"Kintrup"},{"last_name":"Bremenkamp","id":"74264","full_name":"Bremenkamp, Laura Rabea","first_name":"Laura Rabea"},{"id":"76917","first_name":"Amanda","last_name":"Barbosa Jardim","full_name":"Barbosa Jardim, Amanda"},{"id":"74260","first_name":"Maximilian","full_name":"Müh, Maximilian","last_name":"Müh"}],"year":"2020","conference":{"name":"Detmold Conference Week","location":"Detmold","start_date":"2020-02-11","end_date":"2020-02-11"},"department":[{"_id":"DEP1055"},{"_id":"DEP1025"},{"_id":"DEP1028"}],"status":"public","title":"Forum Essigfabrik - Culture Tech Talk 2","citation":{"ieee":"A. Häusler, C. Oldenburg, C. Kintrup, L. R. Bremenkamp, A. Barbosa Jardim, and M. Müh, “Forum Essigfabrik - Culture Tech Talk 2,” presented at the Detmold Conference Week, Detmold, 2020.","ama":"Häusler A, Oldenburg C, Kintrup C, Bremenkamp LR, Barbosa Jardim A, Müh M. Forum Essigfabrik - Culture Tech Talk 2. In: Detmold Conference Week. ; 2020.","chicago":"Häusler, Axel, Carsten Oldenburg, Christopher Kintrup, Laura Rabea Bremenkamp, Amanda Barbosa Jardim, and Maximilian Müh. “Forum Essigfabrik - Culture Tech Talk 2.” In Detmold Conference Week, 2020.","apa":"Häusler, A., Oldenburg, C., Kintrup, C., Bremenkamp, L. R., Barbosa Jardim, A., & Müh, M. (2020). Forum Essigfabrik - Culture Tech Talk 2. Detmold Conference Week. Detmold Conference Week, Detmold.","havard":"A. Häusler, C. Oldenburg, C. Kintrup, L.R. Bremenkamp, A. Barbosa Jardim, M. Müh, Forum Essigfabrik - Culture Tech Talk 2, in: Detmold Conference Week, 2020.","mla":"Häusler, Axel, et al. “Forum Essigfabrik - Culture Tech Talk 2.” Detmold Conference Week, 2020.","bjps":"Häusler A et al. (2020) Forum Essigfabrik - Culture Tech Talk 2. Detmold Conference Week.","ufg":"Häusler, Axel u. a.: Forum Essigfabrik - Culture Tech Talk 2, in: o. Hg.: Detmold Conference Week, o. O. 2020.","van":"Häusler A, Oldenburg C, Kintrup C, Bremenkamp LR, Barbosa Jardim A, Müh M. Forum Essigfabrik - Culture Tech Talk 2. In: Detmold Conference Week. 2020.","chicago-de":"Häusler, Axel, Carsten Oldenburg, Christopher Kintrup, Laura Rabea Bremenkamp, Amanda Barbosa Jardim und Maximilian Müh. 2020. Forum Essigfabrik - Culture Tech Talk 2. In: Detmold Conference Week.","din1505-2-1":"Häusler, Axel ; Oldenburg, Carsten ; Kintrup, Christopher ; Bremenkamp, Laura Rabea ; Barbosa Jardim, Amanda ; Müh, Maximilian: Forum Essigfabrik - Culture Tech Talk 2. In: Detmold Conference Week, 2020","short":"A. Häusler, C. Oldenburg, C. Kintrup, L.R. Bremenkamp, A. Barbosa Jardim, M. Müh, in: Detmold Conference Week, 2020."}},{"department":[{"_id":"DEP1055"}],"author":[{"first_name":"Hans","full_name":"Sachs, Hans","last_name":"Sachs","id":"64589"},{"full_name":"Stavric, Milena","first_name":"Milena","last_name":"Stavric"}],"year":"2020","publisher":"Birkhäuser","page":"760","status":"public","title":"Model Making","publication_status":"published","citation":{"ama":"Sachs H, Stavric M. Model Making. In: Hovestadt L, Hirschberg U, Fritz O, eds. Atlas of Digital Architecture. Birkhäuser; 2020:760. doi:10.1515/9783035620115-017","ieee":"H. Sachs and M. Stavric, “Model Making,” in Atlas of Digital Architecture, L. Hovestadt, U. Hirschberg, and O. Fritz, Eds. Basel: Birkhäuser, 2020, p. 760. doi: 10.1515/9783035620115-017.","mla":"Sachs, Hans, and Milena Stavric. “Model Making.” Atlas of Digital Architecture, edited by Ludger Hovestadt et al., Birkhäuser, 2020, p. 760, https://doi.org/10.1515/9783035620115-017.","havard":"H. Sachs, M. Stavric, Model Making, in: L. Hovestadt, U. Hirschberg, O. Fritz (Eds.), Atlas of Digital Architecture, Birkhäuser, Basel, 2020: p. 760.","bjps":"Sachs H and Stavric M (2020) Model Making. In Hovestadt L, Hirschberg U and Fritz O (eds), Atlas of Digital Architecture. Basel: Birkhäuser, p. 760.","ufg":"Sachs, Hans/Stavric, Milena: Model Making, in: Hovestadt, Ludger/Hirschberg, Urs/Fritz, Oliver (Hgg.): Atlas of Digital Architecture, Basel 2020, S. 760.","van":"Sachs H, Stavric M. Model Making. In: Hovestadt L, Hirschberg U, Fritz O, editors. Atlas of Digital Architecture. Basel: Birkhäuser; 2020. p. 760.","chicago":"Sachs, Hans, and Milena Stavric. “Model Making.” In Atlas of Digital Architecture, edited by Ludger Hovestadt, Urs Hirschberg, and Oliver Fritz, 760. Basel: Birkhäuser, 2020. https://doi.org/10.1515/9783035620115-017.","apa":"Sachs, H., & Stavric, M. (2020). Model Making. In L. Hovestadt, U. Hirschberg, & O. Fritz (Eds.), Atlas of Digital Architecture (p. 760). Birkhäuser. https://doi.org/10.1515/9783035620115-017","chicago-de":"Sachs, Hans und Milena Stavric. 2020. Model Making. In: Atlas of Digital Architecture, hg. von Ludger Hovestadt, Urs Hirschberg, und Oliver Fritz, 760. Basel: Birkhäuser. doi:10.1515/9783035620115-017, .","din1505-2-1":"Sachs, Hans ; Stavric, Milena: Model Making. In: Hovestadt, L. ; Hirschberg, U. ; Fritz, O. (Hrsg.): Atlas of Digital Architecture. Basel : Birkhäuser, 2020, S. 760","short":"H. Sachs, M. Stavric, in: L. Hovestadt, U. Hirschberg, O. Fritz (Eds.), Atlas of Digital Architecture, Birkhäuser, Basel, 2020, p. 760."},"doi":"10.1515/9783035620115-017","_id":"5905","language":[{"iso":"eng"}],"place":"Basel","date_created":"2021-05-14T11:08:41Z","type":"book_chapter","publication":"Atlas of Digital Architecture","publication_identifier":{"isbn":["9783035619904"],"eisbn":["9783035620115"]},"editor":[{"full_name":"Hovestadt, Ludger","first_name":"Ludger","last_name":"Hovestadt"},{"last_name":"Hirschberg","full_name":"Hirschberg, Urs ","first_name":"Urs "},{"last_name":"Fritz","full_name":"Fritz, Oliver","first_name":"Oliver"}],"date_updated":"2025-09-15T06:34:43Z","related_material":{"link":[{"url":"https://www.atlasofdigitalarchitecture.com/","relation":"confirmation"}]},"user_id":"83778"},{"title":"Erstellung eines Konzeptes für die EU-weite Migration eines Digitalen Automatischen Kupplungssystems (DAK) für den Schienengüterverkehr : Schlussbericht","publication_status":"published","citation":{"chicago":"Hagenlocher, Stefan, Paul Wittenbrink, Carsten Leuchtmann, Boris Galonske, Titus Kehrmann, Markus Hecht, Mirko Leiste, et al. Erstellung eines Konzeptes für die EU-weite Migration eines Digitalen Automatischen Kupplungssystems (DAK) für den Schienengüterverkehr : Schlussbericht. Berlin: Bundesministerium für Verkehr und digitale Infrastruktur - BMDV, 2020.","apa":"Hagenlocher, S., Wittenbrink, P., Leuchtmann, C., Galonske, B., Kehrmann, T., Hecht, M., Leiste, M., Discher, S., König, R., Pollehn, T., Ruf, M., Witte, S., Gehrke, S., Hess, R., Röckemann, K., & Steinmetz, A. (2020). Erstellung eines Konzeptes für die EU-weite Migration eines Digitalen Automatischen Kupplungssystems (DAK) für den Schienengüterverkehr : Schlussbericht. Bundesministerium für Verkehr und digitale Infrastruktur - BMDV.","bjps":"Hagenlocher S et al. (2020) Erstellung eines Konzeptes für die EU-weite Migration eines Digitalen Automatischen Kupplungssystems (DAK) für den Schienengüterverkehr : Schlussbericht. Berlin: Bundesministerium für Verkehr und digitale Infrastruktur - BMDV.","havard":"S. Hagenlocher, P. Wittenbrink, C. Leuchtmann, B. Galonske, T. Kehrmann, M. Hecht, M. Leiste, S. Discher, R. König, T. Pollehn, M. Ruf, S. Witte, S. Gehrke, R. Hess, K. Röckemann, A. Steinmetz, Erstellung eines Konzeptes für die EU-weite Migration eines Digitalen Automatischen Kupplungssystems (DAK) für den Schienengüterverkehr : Schlussbericht, Bundesministerium für Verkehr und digitale Infrastruktur - BMDV, Berlin, 2020.","mla":"Hagenlocher, Stefan, et al. Erstellung eines Konzeptes für die EU-weite Migration eines Digitalen Automatischen Kupplungssystems (DAK) für den Schienengüterverkehr : Schlussbericht. Bundesministerium für Verkehr und digitale Infrastruktur - BMDV, 2020.","ufg":"Hagenlocher, Stefan u. a.: Erstellung eines Konzeptes für die EU-weite Migration eines Digitalen Automatischen Kupplungssystems (DAK) für den Schienengüterverkehr : Schlussbericht, Berlin 2020.","van":"Hagenlocher S, Wittenbrink P, Leuchtmann C, Galonske B, Kehrmann T, Hecht M, et al. Erstellung eines Konzeptes für die EU-weite Migration eines Digitalen Automatischen Kupplungssystems (DAK) für den Schienengüterverkehr : Schlussbericht. Berlin: Bundesministerium für Verkehr und digitale Infrastruktur - BMDV; 2020. 188 p.","din1505-2-1":"Hagenlocher, Stefan ; Wittenbrink, Paul ; Leuchtmann, Carsten ; Galonske, Boris ; Kehrmann, Titus ; Hecht, Markus ; Leiste, Mirko ; Discher, Saskia ; u. a.: Erstellung eines Konzeptes für die EU-weite Migration eines Digitalen Automatischen Kupplungssystems (DAK) für den Schienengüterverkehr : Schlussbericht. Berlin : Bundesministerium für Verkehr und digitale Infrastruktur - BMDV, 2020","chicago-de":"Hagenlocher, Stefan, Paul Wittenbrink, Carsten Leuchtmann, Boris Galonske, Titus Kehrmann, Markus Hecht, Mirko Leiste, u. a. 2020. Erstellung eines Konzeptes für die EU-weite Migration eines Digitalen Automatischen Kupplungssystems (DAK) für den Schienengüterverkehr : Schlussbericht. Berlin: Bundesministerium für Verkehr und digitale Infrastruktur - BMDV.","short":"S. Hagenlocher, P. Wittenbrink, C. Leuchtmann, B. Galonske, T. Kehrmann, M. Hecht, M. Leiste, S. Discher, R. König, T. Pollehn, M. Ruf, S. Witte, S. Gehrke, R. Hess, K. Röckemann, A. Steinmetz, Erstellung eines Konzeptes für die EU-weite Migration eines Digitalen Automatischen Kupplungssystems (DAK) für den Schienengüterverkehr : Schlussbericht, Bundesministerium für Verkehr und digitale Infrastruktur - BMDV, Berlin, 2020.","ieee":"S. Hagenlocher et al., Erstellung eines Konzeptes für die EU-weite Migration eines Digitalen Automatischen Kupplungssystems (DAK) für den Schienengüterverkehr : Schlussbericht. Berlin: Bundesministerium für Verkehr und digitale Infrastruktur - BMDV, 2020.","ama":"Hagenlocher S, Wittenbrink P, Leuchtmann C, et al. Erstellung eines Konzeptes für die EU-weite Migration eines Digitalen Automatischen Kupplungssystems (DAK) für den Schienengüterverkehr : Schlussbericht. Bundesministerium für Verkehr und digitale Infrastruktur - BMDV; 2020."},"department":[{"_id":"DEP5000"},{"_id":"DEP5023"}],"author":[{"full_name":"Hagenlocher, Stefan","last_name":"Hagenlocher","first_name":"Stefan"},{"full_name":"Wittenbrink, Paul","first_name":"Paul","last_name":"Wittenbrink"},{"full_name":"Leuchtmann, Carsten ","first_name":"Carsten ","last_name":"Leuchtmann"},{"first_name":"Boris ","full_name":"Galonske, Boris ","last_name":"Galonske"},{"last_name":"Kehrmann","first_name":"Titus","full_name":"Kehrmann, Titus"},{"last_name":"Hecht","first_name":"Markus","full_name":"Hecht, Markus"},{"last_name":"Leiste","first_name":"Mirko","full_name":"Leiste, Mirko"},{"first_name":"Saskia","last_name":"Discher","full_name":"Discher, Saskia"},{"last_name":"König","full_name":"König, Rainer","first_name":"Rainer"},{"last_name":"Pollehn","first_name":"Tobias","full_name":"Pollehn, Tobias"},{"last_name":"Ruf","first_name":"Moritz","full_name":"Ruf, Moritz"},{"first_name":"Stefan","full_name":"Witte, Stefan","last_name":"Witte","id":"1605"},{"first_name":"Sebastian","full_name":"Gehrke, Sebastian","last_name":"Gehrke"},{"first_name":"Roland ","last_name":"Hess","full_name":"Hess, Roland "},{"last_name":"Röckemann","first_name":"Kristian","full_name":"Röckemann, Kristian"},{"full_name":"Steinmetz, Andreas","first_name":"Andreas","last_name":"Steinmetz"}],"main_file_link":[{"url":"https://bmdv.bund.de/SharedDocs/DE/Anlage/E/schlussbericht-dak-studie.html?nn=12830","open_access":"1"}],"year":"2020","page":"188","status":"public","publisher":"Bundesministerium für Verkehr und digitale Infrastruktur - BMDV","date_created":"2023-07-27T11:19:13Z","type":"research_paper","date_updated":"2023-07-28T12:15:23Z","user_id":"83781","oa":"1","language":[{"iso":"ger"}],"place":"Berlin","_id":"10171"},{"department":[{"_id":"DEP6020"}],"author":[{"id":"74607","first_name":"Slavi","last_name":"Warkentin","full_name":"Warkentin, Slavi"},{"full_name":"Austermann, Johann","first_name":"Johann","last_name":"Austermann","id":"42114"},{"last_name":"Borcherding","full_name":"Borcherding, Holger","id":"1693","first_name":"Holger"}],"year":"2020","main_file_link":[{"open_access":"1","url":"https://emagazin.etz.de/de/profiles/12354bdf8065/editions/fa6e68bb873099e6d950"}],"issue":"7","abstract":[{"text":"Um das Potenzial von industriellen Gleichstromanlagen überprüfen zu können, hat die Technische Hochschule Ostwestfalen-Lippe in Lemgo eine Versuchsanlage konzipiert. Zudem lassen sich damit Einflüsse und wechselwirkungen einer Anlage auf ein DC-Verbundnetz simulieren. Das kompakte und flexible Transferzentrum ermöglicht quasi als „Produktionszelle in the Loop\" die Untersuchung der Stabilität der Anlage sowie der Auswirkungen von Fehlerfällen. Ein besonderer Schwerpunkt liegt auf der Nachbildung bestehender AC-versorgter oder zukünftiger Produktionsmaschinen in DC. um Energieeinsparpotenziale aufzuzeigen und Entwicklungszeiten zu verringern.","lang":"eng"}],"page":"50-54","status":"public","publisher":"VDE","title":"Industrielles DC-Netz mit gesteuerten elektrischen Antrieben","publication_status":"published","citation":{"short":"S. Warkentin, J. Austermann, H. Borcherding, etz elektrotechnik & automation (2020) 50–54.","chicago-de":"Warkentin, Slavi, Johann Austermann und Holger Borcherding. 2020. Industrielles DC-Netz mit gesteuerten elektrischen Antrieben. etz elektrotechnik & automation, Nr. 7: 50–54.","din1505-2-1":"Warkentin, Slavi ; Austermann, Johann ; Borcherding, Holger: Industrielles DC-Netz mit gesteuerten elektrischen Antrieben. In: etz elektrotechnik & automation, VDE (2020), Nr. 7, S. 50–54","apa":"Warkentin, S., Austermann, J., & Borcherding, H. (2020). Industrielles DC-Netz mit gesteuerten elektrischen Antrieben. etz elektrotechnik & automation, 7, 50–54.","chicago":"Warkentin, Slavi, Johann Austermann, and Holger Borcherding. “Industrielles DC-Netz mit gesteuerten elektrischen Antrieben.” etz elektrotechnik & automation, no. 7 (2020): 50–54.","van":"Warkentin S, Austermann J, Borcherding H. Industrielles DC-Netz mit gesteuerten elektrischen Antrieben. etz elektrotechnik & automation. 2020;(7):50–4.","ufg":"Warkentin, Slavi/Austermann, Johann/Borcherding, Holger: Industrielles DC-Netz mit gesteuerten elektrischen Antrieben, in: etz elektrotechnik & automation (2020), H. 7, S. 50–54.","mla":"Warkentin, Slavi, et al. “Industrielles DC-Netz mit gesteuerten elektrischen Antrieben.” etz elektrotechnik & automation, no. 7, 2020, pp. 50–54.","bjps":"Warkentin S, Austermann J and Borcherding H (2020) Industrielles DC-Netz mit gesteuerten elektrischen Antrieben. etz elektrotechnik & automation 50–54.","havard":"S. Warkentin, J. Austermann, H. Borcherding, Industrielles DC-Netz mit gesteuerten elektrischen Antrieben, etz elektrotechnik & automation. (2020) 50–54.","ieee":"S. Warkentin, J. Austermann, and H. Borcherding, “Industrielles DC-Netz mit gesteuerten elektrischen Antrieben,” etz elektrotechnik & automation, no. 7, pp. 50–54, 2020.","ama":"Warkentin S, Austermann J, Borcherding H. Industrielles DC-Netz mit gesteuerten elektrischen Antrieben. etz elektrotechnik & automation. 2020;(7):50-54."},"oa":"1","language":[{"iso":"ger"}],"_id":"10401","date_created":"2023-09-21T15:39:48Z","type":"scientific_journal_article","publication":"etz elektrotechnik & automation","date_updated":"2023-09-22T08:48:13Z","user_id":"83781"},{"language":[{"iso":"ger"}],"date_created":"2023-09-21T15:49:20Z","publication_identifier":{"issn":["2625-4212"],"eissn":["2364-3137 "]},"publication":"atp magazin","related_material":{"link":[{"url":"https://ojs.di-verlag.de/index.php/atp_edition/issue/view/582","relation":"confirmation"}]},"date_updated":"2023-09-22T08:39:40Z","year":"2020","author":[{"id":"74607","first_name":"Slavi","full_name":"Warkentin, Slavi","last_name":"Warkentin"},{"first_name":"Johann","full_name":"Austermann, Johann","id":"42114","last_name":"Austermann"},{"full_name":"Borcherding, Holger","first_name":"Holger","id":"1693","last_name":"Borcherding"}],"main_file_link":[{"url":"https://www.vulkan-shop.de/modulare-versuchsanlage-fur-ein-industrielles-dc-netz"}],"page":"54-59","status":"public","title":" Modulare Versuchsanlage für ein industrielles DC-Netz : Potenziale industrieller Gleichstromanlagen ","citation":{"ieee":"S. Warkentin, J. Austermann, and H. Borcherding, “ Modulare Versuchsanlage für ein industrielles DC-Netz : Potenziale industrieller Gleichstromanlagen ,” atp magazin, vol. 62, no. 10, pp. 54–59, 2020.","ama":"Warkentin S, Austermann J, Borcherding H. Modulare Versuchsanlage für ein industrielles DC-Netz : Potenziale industrieller Gleichstromanlagen . atp magazin. 2020;62(10):54-59.","chicago":"Warkentin, Slavi, Johann Austermann, and Holger Borcherding. “ Modulare Versuchsanlage für ein industrielles DC-Netz : Potenziale industrieller Gleichstromanlagen .” atp magazin 62, no. 10 (2020): 54–59.","apa":"Warkentin, S., Austermann, J., & Borcherding, H. (2020). Modulare Versuchsanlage für ein industrielles DC-Netz : Potenziale industrieller Gleichstromanlagen . atp magazin, 62(10), 54–59.","havard":"S. Warkentin, J. Austermann, H. Borcherding, Modulare Versuchsanlage für ein industrielles DC-Netz : Potenziale industrieller Gleichstromanlagen , atp magazin. 62 (2020) 54–59.","bjps":"Warkentin S, Austermann J and Borcherding H (2020) Modulare Versuchsanlage für ein industrielles DC-Netz : Potenziale industrieller Gleichstromanlagen . atp magazin 62, 54–59.","mla":"Warkentin, Slavi, et al. “ Modulare Versuchsanlage für ein industrielles DC-Netz : Potenziale industrieller Gleichstromanlagen .” atp magazin, vol. 62, no. 10, 2020, pp. 54–59.","ufg":"Warkentin, Slavi/Austermann, Johann/Borcherding, Holger: Modulare Versuchsanlage für ein industrielles DC-Netz : Potenziale industrieller Gleichstromanlagen , in: atp magazin 62 (2020), H. 10, S. 54–59.","van":"Warkentin S, Austermann J, Borcherding H. Modulare Versuchsanlage für ein industrielles DC-Netz : Potenziale industrieller Gleichstromanlagen . atp magazin. 2020;62(10):54–9.","chicago-de":"Warkentin, Slavi, Johann Austermann und Holger Borcherding. 2020. Modulare Versuchsanlage für ein industrielles DC-Netz : Potenziale industrieller Gleichstromanlagen . atp magazin 62, Nr. 10: 54–59.","din1505-2-1":"Warkentin, Slavi ; Austermann, Johann ; Borcherding, Holger: Modulare Versuchsanlage für ein industrielles DC-Netz : Potenziale industrieller Gleichstromanlagen . In: atp magazin Bd. 62. Berlin, Vulkan-Verlag GmbH (2020), Nr. 10, S. 54–59","short":"S. Warkentin, J. Austermann, H. Borcherding, atp magazin 62 (2020) 54–59."},"volume":62,"_id":"10402","place":"Berlin","type":"scientific_journal_article","intvolume":" 62","user_id":"83781","issue":"10","abstract":[{"lang":"ger","text":"In diesem Beitrag wird das Konzept einer Versuchsanlage für industrielle Gleichspannungsnetze vorgestellt indem alle Geräte über ein gemeinsames Gleichspannungsnetz gekoppelt sind. In einem Echtzeit-Modell, umgesetzt in Matlab/Simulink, werden Sollwerte der Drehzahl- und Drehmomentenverläufe berechnet und mittels Feldbus an die jeweiligen Lastantriebswechselrichter übermittelt. Dadurch ergeben sich an der Welle nicht nur reale mechanische Größen, sondern auch die sich im Gleichspannungsnetz einstellenden Ströme entsprechen denen einer realen Anlage. Somit kann beispielsweise untersucht werden, wie sich eine von AC- auf DC-Netz umgerüstete Produktionsmaschine verhalten würde, ohne diese bauen zu müssen. Weiterhin können die Auswirkungen von Speichereinbindungen und Netzstörungen realitätsnah untersucht werden."}],"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"publisher":"Vulkan-Verlag GmbH","publication_status":"published"},{"department":[{"_id":"DEP5023"}],"conference":{"location":"Wien","name":"25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)","end_date":"2020-09-11","start_date":"2020-09-08"},"year":"2020","author":[{"last_name":"Ehrlich","full_name":"Ehrlich, Marco","id":"61562","first_name":"Marco"},{"first_name":"Martin","last_name":"Gergeleit","full_name":"Gergeleit, Martin"},{"id":"1486","last_name":"Trsek","first_name":"Henning","full_name":"Trsek, Henning","orcid":"0000-0002-0133-0656"},{"last_name":"Lukas","first_name":"Georg","full_name":"Lukas, Georg"}],"abstract":[{"text":"The current developments towards the visions of Industrie 4.0 will create open and dynamic architectures being supervised by Industrial Automation and Control Systems. Due to this new connectivity and flexibility, future industrial production systems need to be inspected during all phases of the whole lifecycle from a security point of view as well. Frequent reconfiguration and adaptation based on smart services impose advanced requirements on the audits and certification with regard to security. To facilitate that, this work presents an approach for the modeling of security requirements and capabilities within the Industrial Reference Architecture and evaluates it based on the concrete system architectures of a number of industrial use cases. The result is the Sec4ICS tooling-based concept for the automated assessment of security-related functionalities within industrial systems.","lang":"eng"}],"page":"1640-1647","status":"public","publisher":"IEEE","title":"Towards Automated Security Evaluation within the Industrial Reference Architecture","publication_status":"published","citation":{"din1505-2-1":"Ehrlich, Marco ; Gergeleit, Martin ; Trsek, Henning ; Lukas, Georg: Towards Automated Security Evaluation within the Industrial Reference Architecture. In: 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Piscataway, NJ : IEEE, 2020, S. 1640–1647","chicago-de":"Ehrlich, Marco, Martin Gergeleit, Henning Trsek und Georg Lukas. 2020. Towards Automated Security Evaluation within the Industrial Reference Architecture. In: 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 1640–1647. Piscataway, NJ: IEEE. doi:10.1109/ETFA46521.2020.9211883, .","short":"M. Ehrlich, M. Gergeleit, H. Trsek, G. Lukas, in: 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), IEEE, Piscataway, NJ, 2020, pp. 1640–1647.","ufg":"Ehrlich, Marco u. a.: Towards Automated Security Evaluation within the Industrial Reference Architecture, in: o. Hg.: 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Piscataway, NJ 2020, S. 1640–1647.","bjps":"Ehrlich M et al. (2020) Towards Automated Security Evaluation within the Industrial Reference Architecture. 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Piscataway, NJ: IEEE, pp. 1640–1647.","mla":"Ehrlich, Marco, et al. “Towards Automated Security Evaluation within the Industrial Reference Architecture.” 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), IEEE, 2020, pp. 1640–47, https://doi.org/10.1109/ETFA46521.2020.9211883.","havard":"M. Ehrlich, M. Gergeleit, H. Trsek, G. Lukas, Towards Automated Security Evaluation within the Industrial Reference Architecture, in: 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), IEEE, Piscataway, NJ, 2020: pp. 1640–1647.","van":"Ehrlich M, Gergeleit M, Trsek H, Lukas G. Towards Automated Security Evaluation within the Industrial Reference Architecture. In: 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Piscataway, NJ: IEEE; 2020. p. 1640–7.","chicago":"Ehrlich, Marco, Martin Gergeleit, Henning Trsek, and Georg Lukas. “Towards Automated Security Evaluation within the Industrial Reference Architecture.” In 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 1640–47. Piscataway, NJ: IEEE, 2020. https://doi.org/10.1109/ETFA46521.2020.9211883.","apa":"Ehrlich, M., Gergeleit, M., Trsek, H., & Lukas, G. (2020). Towards Automated Security Evaluation within the Industrial Reference Architecture. 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 1640–1647. https://doi.org/10.1109/ETFA46521.2020.9211883","ama":"Ehrlich M, Gergeleit M, Trsek H, Lukas G. Towards Automated Security Evaluation within the Industrial Reference Architecture. In: 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). IEEE; 2020:1640-1647. doi:10.1109/ETFA46521.2020.9211883","ieee":"M. Ehrlich, M. Gergeleit, H. Trsek, and G. Lukas, “Towards Automated Security Evaluation within the Industrial Reference Architecture,” in 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Wien, 2020, pp. 1640–1647. doi: 10.1109/ETFA46521.2020.9211883."},"language":[{"iso":"eng"}],"place":"Piscataway, NJ","keyword":["Security","Automation","OT","Sec4ICS","iRefA"],"doi":"10.1109/ETFA46521.2020.9211883","_id":"11147","date_created":"2024-03-01T08:41:28Z","type":"conference","publication":"25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)","publication_identifier":{"issn":["1946-0740"],"eisbn":[" 978-1-7281-8956-7 "],"isbn":["978-1-7281-8957-4"],"eissn":["1946-0759"]},"date_updated":"2025-06-26T13:33:05Z","user_id":"83781"},{"date_updated":"2024-03-11T14:50:18Z","publication":"Automation 2020","publication_identifier":{"eisbn":["978-3-18-102375-4"],"isbn":["978-3-18-092375-8 "]},"date_created":"2024-03-01T12:24:59Z","language":[{"iso":"ger"}],"volume":2375,"citation":{"van":"Czybik B, Ehrlich M, Trsek H, Oswald A. Eine differenzierte Betrachtung ganzheitlicher Selbstorganisation im Rahmen von Industrie 4.0. Automation 2020. Düsseldorf: VDI; 2020. (VDI-Berichte; vol. 2375).","ufg":"Czybik, Björn u. a.: Eine differenzierte Betrachtung ganzheitlicher Selbstorganisation im Rahmen von Industrie 4.0, Bd. 2375, Düsseldorf 2020 (VDI-Berichte).","havard":"B. Czybik, M. Ehrlich, H. Trsek, A. Oswald, Eine differenzierte Betrachtung ganzheitlicher Selbstorganisation im Rahmen von Industrie 4.0, VDI, Düsseldorf, 2020.","bjps":"Czybik B et al. (2020) Eine differenzierte Betrachtung ganzheitlicher Selbstorganisation im Rahmen von Industrie 4.0. Düsseldorf: VDI.","mla":"Czybik, Björn, et al. “Eine differenzierte Betrachtung ganzheitlicher Selbstorganisation im Rahmen von Industrie 4.0.” Automation 2020, vol. 2375, VDI, 2020, pp. 1055–68, https://doi.org/10.51202/9783181023754-1055.","apa":"Czybik, B., Ehrlich, M., Trsek, H., & Oswald, A. (2020). Eine differenzierte Betrachtung ganzheitlicher Selbstorganisation im Rahmen von Industrie 4.0. In Automation 2020 (Vol. 2375, pp. 1055–1068). VDI. https://doi.org/10.51202/9783181023754-1055","chicago":"Czybik, Björn, Marco Ehrlich, Henning Trsek, and Alfred Oswald. Eine differenzierte Betrachtung ganzheitlicher Selbstorganisation im Rahmen von Industrie 4.0. Automation 2020. Vol. 2375. VDI-Berichte. Düsseldorf: VDI, 2020. https://doi.org/10.51202/9783181023754-1055.","short":"B. Czybik, M. Ehrlich, H. Trsek, A. Oswald, Eine differenzierte Betrachtung ganzheitlicher Selbstorganisation im Rahmen von Industrie 4.0, VDI, Düsseldorf, 2020.","din1505-2-1":"Czybik, Björn ; Ehrlich, Marco ; Trsek, Henning ; Oswald, Alfred: Eine differenzierte Betrachtung ganzheitlicher Selbstorganisation im Rahmen von Industrie 4.0, VDI-Berichte. Bd. 2375. Düsseldorf : VDI, 2020","chicago-de":"Czybik, Björn, Marco Ehrlich, Henning Trsek und Alfred Oswald. 2020. Eine differenzierte Betrachtung ganzheitlicher Selbstorganisation im Rahmen von Industrie 4.0. Automation 2020. Bd. 2375. VDI-Berichte. Düsseldorf: VDI. doi:10.51202/9783181023754-1055, .","ama":"Czybik B, Ehrlich M, Trsek H, Oswald A. Eine differenzierte Betrachtung ganzheitlicher Selbstorganisation im Rahmen von Industrie 4.0. Vol 2375. VDI; 2020:1055-1068. doi:10.51202/9783181023754-1055","ieee":"B. Czybik, M. Ehrlich, H. Trsek, and A. Oswald, Eine differenzierte Betrachtung ganzheitlicher Selbstorganisation im Rahmen von Industrie 4.0, vol. 2375. Düsseldorf: VDI, 2020, pp. 1055–1068. doi: 10.51202/9783181023754-1055."},"title":"Eine differenzierte Betrachtung ganzheitlicher Selbstorganisation im Rahmen von Industrie 4.0","status":"public","page":"1055-1068","year":"2020","author":[{"id":"76180","full_name":"Czybik, Björn","last_name":"Czybik","first_name":"Björn"},{"full_name":"Ehrlich, Marco","last_name":"Ehrlich","id":"61562","first_name":"Marco"},{"orcid":"0000-0002-0133-0656","id":"1486","full_name":"Trsek, Henning","last_name":"Trsek","first_name":"Henning"},{"first_name":"Alfred","last_name":"Oswald","full_name":"Oswald, Alfred"}],"intvolume":" 2375","user_id":"83781","type":"conference_editor_article","_id":"11153","doi":"10.51202/9783181023754-1055","place":"Düsseldorf","publication_status":"published","series_title":"VDI-Berichte","publisher":"VDI","abstract":[{"text":"The developments in the area of Industrie 4.0 and Work 4.0 towards self-organized adaptive\r\nproduction systems as well as self-organized companies create new demands on technical\r\nand social systems. These include increased flexibility, faster decisions, and transparent com-\r\nmunication to address the currently volatile market pressure. As a result, the topic of self-\r\norganization for the industrial domain has moved further into focus and concepts from different\r\nareas, such as nature, social, or management, are being adapted for a technological use. This\r\narticle sheds light on self-organisation and the corresponding characteristics that will be nec-\r\nessary for socio-technical systems in the future for industrial companies. The knowledge\r\ngained allows us to establish connections between the technical development of the industrial\r\ndomain and the social structures of the involved companies. These insights are used to provide\r\nrecommendations for further steps towards the visions from Industrie 4.0.","lang":"eng"},{"text":"Durch die Entwicklungen im Bereich der Industrie 4.0 und Arbeit 4.0 hin zu selbstorganisierten\r\nadaptiven Produktionssystemen und selbstorganisierten Unternehmen entstehen neue Anfor-\r\nderungen an technische und soziale Systeme. Hierbei ist eine Co-Evolution der Strukturen von\r\ntechnischen und sozialen Systemen zu beobachten. Zu den Anforderungen gehören eine er-\r\nhöhte Flexibilität, schnellere Entscheidungen und transparente Kommunikation, um den mo-\r\nmentanen Marktdruck zu adressieren. Dadurch ist das Thema der Selbstorganisation für die\r\nIndustrie weiter in den Fokus gerückt und es werden Konzepte aus verschiedenen Bereichen\r\nwie Biologie, Soziales oder Management zur technologischen Nutzung adaptiert. Dieser Bei-\r\ntrag beleuchtet die Selbstorganisation und die entsprechenden Ausprägungen, die für sozio-\r\ntechnische Systeme in zukünftigen Unternehmen notwendig sein werden. Durch die gewon-\r\nnenen Erkenntnisse lassen sich Zusammenhänge zwischen der technischen Entwicklung der\r\nIndustrie und den sozialen Strukturen von Unternehmen herstellen. Diese werden genutzt, um\r\nHandlungsfelder für weitere Schritte in Richtung Industrie 4.0 zu geben.","lang":"ger"}],"conference":{"end_date":"2020-07-01","start_date":"2020-06-30","location":"online","name":"Automation 2020 : 21. Leitkongress Mess- und Automatisierungstechnik : shaping automation for our future"},"department":[{"_id":"DEP5023"}]},{"_id":"4786","place":"Berlin","language":[{"iso":"ger"}],"publication_identifier":{"isbn":["978-3-662-45537-1"]},"publication":"Handbuch Industrie 4.0: Produktion, Automatisierung und Logistik","type":"book_chapter","date_created":"2021-02-02T08:38:44Z","editor":[{"full_name":"ten Hompel, Michael","first_name":"Michael","last_name":"ten Hompel"},{"first_name":"Birgit","full_name":"Vogel-Heuser, Birgit","last_name":"Vogel-Heuser"},{"last_name":"Bauernhansl","full_name":"Bauernhansl, Thomas","first_name":"Thomas"}],"user_id":"74004","date_updated":"2023-03-15T13:49:55Z","author":[{"id":"10876","full_name":"Niggemann, Oliver","last_name":"Niggemann","first_name":"Oliver"},{"first_name":"Gautam","full_name":"Biswas, Gautam","last_name":"Biswas"},{"first_name":"John S.","last_name":"Kinnebrew","full_name":"Kinnebrew, John S."},{"first_name":"Hamed","last_name":"Khorasgani","full_name":"Khorasgani, Hamed"},{"full_name":"Hranisavljevic, Nemanja","id":"62376","last_name":"Hranisavljevic","first_name":"Nemanja"},{"full_name":"Bunte, Andreas","last_name":"Bunte","first_name":"Andreas","id":"58885"}],"year":2020,"department":[{"_id":"DEP5023"}],"publisher":"Springer","status":"public","page":"800","title":"Konzeptualisierung als Kernfrage des Maschinellen Lernens in der Produktion","citation":{"chicago":"Niggemann, Oliver, Gautam Biswas, John S. Kinnebrew, Hamed Khorasgani, Nemanja Hranisavljevic, and Andreas Bunte. “Konzeptualisierung als Kernfrage des Maschinellen Lernens in der Produktion.” In Handbuch Industrie 4.0: Produktion, Automatisierung und Logistik, edited by Michael ten Hompel, Birgit Vogel-Heuser, and Thomas Bauernhansl, 800. Berlin: Springer, 2020.","apa":"Niggemann, O., Biswas, G., Kinnebrew, J. S., Khorasgani, H., Hranisavljevic, N., & Bunte, A. (2020). Konzeptualisierung als Kernfrage des Maschinellen Lernens in der Produktion. In M. ten Hompel, B. Vogel-Heuser, & T. Bauernhansl (Eds.), Handbuch Industrie 4.0: Produktion, Automatisierung und Logistik (p. 800). Berlin: Springer.","mla":"Niggemann, Oliver, et al. “Konzeptualisierung als Kernfrage des Maschinellen Lernens in der Produktion.” Handbuch Industrie 4.0: Produktion, Automatisierung und Logistik, edited by Michael ten Hompel et al., Springer, 2020, p. 800.","havard":"O. Niggemann, G. Biswas, J.S. Kinnebrew, H. Khorasgani, N. Hranisavljevic, A. Bunte, Konzeptualisierung als Kernfrage des Maschinellen Lernens in der Produktion, in: M. ten Hompel, B. Vogel-Heuser, T. Bauernhansl (Eds.), Handbuch Industrie 4.0: Produktion, Automatisierung und Logistik, Springer, Berlin, 2020: p. 800.","bjps":"Niggemann O et al. (2020) Konzeptualisierung als Kernfrage des Maschinellen Lernens in der Produktion. In ten Hompel M, Vogel-Heuser B and Bauernhansl T (eds), Handbuch Industrie 4.0: Produktion, Automatisierung und Logistik. Berlin: Springer, p. 800.","ufg":"Niggemann, Oliver et. al. (2020): Konzeptualisierung als Kernfrage des Maschinellen Lernens in der Produktion, in: Michael ten Hompel et. al. (Hgg.): Handbuch Industrie 4.0: Produktion, Automatisierung und Logistik, Berlin, S. 800.","van":"Niggemann O, Biswas G, Kinnebrew JS, Khorasgani H, Hranisavljevic N, Bunte A. Konzeptualisierung als Kernfrage des Maschinellen Lernens in der Produktion. In: ten Hompel M, Vogel-Heuser B, Bauernhansl T, editors. Handbuch Industrie 40: Produktion, Automatisierung und Logistik. Berlin: Springer; 2020. p. 800.","din1505-2-1":"Niggemann, Oliver ; Biswas, Gautam ; Kinnebrew, John S. ; Khorasgani, Hamed ; Hranisavljevic, Nemanja ; Bunte, Andreas: Konzeptualisierung als Kernfrage des Maschinellen Lernens in der Produktion. In: ten Hompel, M. ; Vogel-Heuser, B. ; Bauernhansl, T. (Hrsg.): Handbuch Industrie 4.0: Produktion, Automatisierung und Logistik. Berlin : Springer, 2020, S. 800","chicago-de":"Niggemann, Oliver, Gautam Biswas, John S. Kinnebrew, Hamed Khorasgani, Nemanja Hranisavljevic und Andreas Bunte. 2020. Konzeptualisierung als Kernfrage des Maschinellen Lernens in der Produktion. In: Handbuch Industrie 4.0: Produktion, Automatisierung und Logistik, hg. von Michael ten Hompel, Birgit Vogel-Heuser, und Thomas Bauernhansl, 800. Berlin: Springer.","short":"O. Niggemann, G. Biswas, J.S. Kinnebrew, H. Khorasgani, N. Hranisavljevic, A. Bunte, in: M. ten Hompel, B. Vogel-Heuser, T. Bauernhansl (Eds.), Handbuch Industrie 4.0: Produktion, Automatisierung und Logistik, Springer, Berlin, 2020, p. 800.","ieee":"O. Niggemann, G. Biswas, J. S. Kinnebrew, H. Khorasgani, N. Hranisavljevic, and A. Bunte, “Konzeptualisierung als Kernfrage des Maschinellen Lernens in der Produktion,” in Handbuch Industrie 4.0: Produktion, Automatisierung und Logistik, M. ten Hompel, B. Vogel-Heuser, and T. Bauernhansl, Eds. Berlin: Springer, 2020, p. 800.","ama":"Niggemann O, Biswas G, Kinnebrew JS, Khorasgani H, Hranisavljevic N, Bunte A. Konzeptualisierung als Kernfrage des Maschinellen Lernens in der Produktion. In: ten Hompel M, Vogel-Heuser B, Bauernhansl T, eds. Handbuch Industrie 4.0: Produktion, Automatisierung und Logistik. Berlin: Springer; 2020:800."},"publication_status":"published"},{"language":[{"iso":"ger"}],"place":"Berlin, Heidelberg","doi":"https://doi.org/10.1007/978-3-662-61374-0_10","_id":"4797","date_created":"2021-02-02T08:59:09Z","type":"book_chapter","publication":"Informatorische Assistenzsysteme in der variantenreichen Montage: Theorie und Praxis","publication_identifier":{"isbn":["978-3-662-61373-3"],"eisbn":["978-3-662-61374-0"]},"project":[{"_id":"FBB6D104-44D9-11E9-AA25-B54CDB794CE1","name":"Montexas 4.0"}],"date_updated":"2023-03-15T13:49:55Z","user_id":"49010","editor":[{"first_name":"Manfred ","last_name":"Bornewasser","full_name":"Bornewasser, Manfred "},{"id":"49010","full_name":"Hinrichsen, Sven","first_name":"Sven","last_name":"Hinrichsen"}],"department":[{"_id":"DEP5023"},{"_id":"DEP7020"},{"_id":"DEP1305"}],"year":2020,"author":[{"full_name":"Hinrichsen, Sven","id":"49010","first_name":"Sven","last_name":"Hinrichsen"},{"last_name":"Moriz","full_name":"Moriz, Natalia","id":"44238","first_name":"Natalia"},{"full_name":"Bornewasser, Manfred","first_name":"Manfred","last_name":"Bornewasser"}],"abstract":[{"lang":"ger","text":"Die Funktion der Montage wird im Zeitverlauf immer wieder grundlegend verändert, indem neue Gestaltungsparadigmen umgesetzt werden. Damit es zu solchen Paradigmenwechseln kommt, bedarf es neben veränderten Marktanforderungen zwingend neuer Erkenntnisse. Diese können sich dabei auf den Einsatz einzelner Technologien, die Anwendung neuer Organisationsprinzipien oder eine veränderte Rolle der Beschäftigten in der Montage beziehen. Die zunehmende Individualisierung der Erzeugnisgestaltung und sich verkürzende Innovationslebenszyklen führen aktuell zu einem Anstieg der Komplexität in der Montage. Damit nehmen die zu verarbeitenden Informationsmengen deutlich zu und es stellt sich die Frage, wie mit diesen großen Mengen an Informationen umzugehen ist. Dabei kommen dem Einsatz von Informations- und Kommunikationstechnologien eine Schlüsselrolle in der Montagesystemgestaltung zu. Wie diese Rolle und mit ihr verbundene Entwicklungen aussehen, wird in fünf Handlungsfeldern beschrieben. Zum Handlungsfeld der Montageassistenzsysteme, das im Mittelpunkt dieses Buches steht, werden zudem einzelne Trends dargestellt. Abschließend werden Hinweise für die betriebliche Praxis formuliert."}],"page":"187-213","status":"public","publisher":"Springer Vieweg","title":"Entwicklungstrends in der Montage","publication_status":"published","citation":{"din1505-2-1":"Hinrichsen, Sven ; Moriz, Natalia ; Bornewasser, Manfred: Entwicklungstrends in der Montage. In: Bornewasser, M. ; Hinrichsen, S. (Hrsg.): Informatorische Assistenzsysteme in der variantenreichen Montage: Theorie und Praxis. Berlin, Heidelberg : Springer Vieweg, 2020, S. 187–213","chicago-de":"Hinrichsen, Sven, Natalia Moriz und Manfred Bornewasser. 2020. Entwicklungstrends in der Montage. In: Informatorische Assistenzsysteme in der variantenreichen Montage: Theorie und Praxis, hg. von Manfred Bornewasser und Sven Hinrichsen, 187–213. Berlin, Heidelberg: Springer Vieweg. doi:https://doi.org/10.1007/978-3-662-61374-0_10, .","short":"S. Hinrichsen, N. Moriz, M. Bornewasser, in: M. Bornewasser, S. Hinrichsen (Eds.), Informatorische Assistenzsysteme in der variantenreichen Montage: Theorie und Praxis, Springer Vieweg, Berlin, Heidelberg, 2020, pp. 187–213.","chicago":"Hinrichsen, Sven, Natalia Moriz, and Manfred Bornewasser. “Entwicklungstrends in der Montage.” In Informatorische Assistenzsysteme in der variantenreichen Montage: Theorie und Praxis, edited by Manfred Bornewasser and Sven Hinrichsen, 187–213. Berlin, Heidelberg: Springer Vieweg, 2020. https://doi.org/10.1007/978-3-662-61374-0_10.","apa":"Hinrichsen, S., Moriz, N., & Bornewasser, M. (2020). Entwicklungstrends in der Montage. In M. Bornewasser & S. Hinrichsen (Eds.), Informatorische Assistenzsysteme in der variantenreichen Montage: Theorie und Praxis (pp. 187–213). Berlin, Heidelberg: Springer Vieweg. https://doi.org/10.1007/978-3-662-61374-0_10","ufg":"Hinrichsen, Sven et. al. (2020): Entwicklungstrends in der Montage, in: Manfred Bornewasser/Sven Hinrichsen (Hgg.): Informatorische Assistenzsysteme in der variantenreichen Montage: Theorie und Praxis, Berlin, Heidelberg, S. 187–213.","mla":"Hinrichsen, Sven, et al. “Entwicklungstrends in der Montage.” Informatorische Assistenzsysteme in der variantenreichen Montage: Theorie und Praxis, edited by Manfred Bornewasser and Sven Hinrichsen, Springer Vieweg, 2020, pp. 187–213, doi:https://doi.org/10.1007/978-3-662-61374-0_10.","bjps":"Hinrichsen S, Moriz N and Bornewasser M (2020) Entwicklungstrends in der Montage. In Bornewasser M and Hinrichsen S (eds), Informatorische Assistenzsysteme in der variantenreichen Montage: Theorie und Praxis. Berlin, Heidelberg: Springer Vieweg, pp. 187–213.","havard":"S. Hinrichsen, N. Moriz, M. Bornewasser, Entwicklungstrends in der Montage, in: M. Bornewasser, S. Hinrichsen (Eds.), Informatorische Assistenzsysteme in der variantenreichen Montage: Theorie und Praxis, Springer Vieweg, Berlin, Heidelberg, 2020: pp. 187–213.","van":"Hinrichsen S, Moriz N, Bornewasser M. Entwicklungstrends in der Montage. In: Bornewasser M, Hinrichsen S, editors. Informatorische Assistenzsysteme in der variantenreichen Montage: Theorie und Praxis. Berlin, Heidelberg: Springer Vieweg; 2020. p. 187–213.","ieee":"S. Hinrichsen, N. Moriz, and M. Bornewasser, “Entwicklungstrends in der Montage,” in Informatorische Assistenzsysteme in der variantenreichen Montage: Theorie und Praxis, M. Bornewasser and S. Hinrichsen, Eds. Berlin, Heidelberg: Springer Vieweg, 2020, pp. 187–213.","ama":"Hinrichsen S, Moriz N, Bornewasser M. Entwicklungstrends in der Montage. In: Bornewasser M, Hinrichsen S, eds. Informatorische Assistenzsysteme in der variantenreichen Montage: Theorie und Praxis. Berlin, Heidelberg: Springer Vieweg; 2020:187-213. doi:https://doi.org/10.1007/978-3-662-61374-0_10"}},{"publisher":"Springer Vieweg","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"end_date":"20218-11-21","start_date":"2018-11-20","name":"9. Jahreskolloquiums \"Kommunikation in der Automation\" (KommA 2018) / 6. Jahreskolloquiums \"Bildverarbeitung in der Automation\" (BVAu 2018)","location":"Lemgo"},"abstract":[{"text":"In diesem Open-Access-Tagungsband sind die besten Beiträge des 9. Jahreskolloquiums \"Kommunikation in der Automation\" (KommA 2018) und des 6. Jahreskolloquiums \"Bildverarbeitung in der Automation\" (BVAu 2018) enthalten. Die Kolloquien fanden am 20. und 21. November 2018 in der SmartFactoryOWL, einer gemeinsamen Einrichtung des Fraunhofer IOSB-INA und der Technischen Hochschule Ostwestfalen-Lippe statt.\r\nDie vorgestellten neuesten Forschungsergebnisse auf den Gebieten der industriellen Kommunikationstechnik und Bildverarbeitung erweitern den aktuellen Stand der Forschung und Technik. Die in den Beiträgen enthaltenen anschaulichen Beispiele aus dem Bereich der Automation setzen die Ergebnisse in den direkten Anwendungsbezug.","lang":"ger"}],"publication_status":"published","series_title":" Technologien für die intelligente Automation","place":"Berlin, Heidelberg","doi":"https://doi.org/10.1007/978-3-662-59895-5","_id":"4851","user_id":"83781","intvolume":" 12","type":"book_editor","page":"364","status":"public","main_file_link":[{"url":"https://link.springer.com/book/10.1007/978-3-662-59895-5?page=2#about","open_access":"1"}],"year":"2020","citation":{"van":"Jasperneite J, Lohweg V, editors. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018. Berlin, Heidelberg: Springer Vieweg; 2020. 364 p. ( Technologien für die intelligente Automation; vol. 12).","ama":"Jasperneite J, Lohweg V, eds. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018. Vol 12. Springer Vieweg; 2020. doi:https://doi.org/10.1007/978-3-662-59895-5","ufg":"Jasperneite, Jürgen/Lohweg, Volker: Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018, Bd. 12, Berlin, Heidelberg 2020 ( Technologien für die intelligente Automation).","bjps":"Jasperneite J and Lohweg V (eds) (2020) Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018. Berlin, Heidelberg: Springer Vieweg.","havard":"J. Jasperneite, V. Lohweg, eds., Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018, Springer Vieweg, Berlin, Heidelberg, 2020.","mla":"Jasperneite, Jürgen, and Volker Lohweg, editors. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018. Springer Vieweg, 2020, https://doi.org/10.1007/978-3-662-59895-5.","apa":"Jasperneite, J., & Lohweg, V. (Eds.). (2020). Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018 (Vol. 12). Springer Vieweg. https://doi.org/10.1007/978-3-662-59895-5","ieee":"J. Jasperneite and V. Lohweg, Eds., Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018, vol. 12. Berlin, Heidelberg: Springer Vieweg, 2020. doi: https://doi.org/10.1007/978-3-662-59895-5.","chicago":"Jasperneite, Jürgen, and Volker Lohweg, eds. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018. Vol. 12. Technologien für die intelligente Automation. Berlin, Heidelberg: Springer Vieweg, 2020. https://doi.org/10.1007/978-3-662-59895-5.","short":"J. Jasperneite, V. Lohweg, eds., Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018, Springer Vieweg, Berlin, Heidelberg, 2020.","din1505-2-1":"Jasperneite, J. ; Lohweg, V. (Hrsg.): Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018, Technologien für die intelligente Automation. Bd. 12. Berlin, Heidelberg : Springer Vieweg, 2020","chicago-de":"Jasperneite, Jürgen und Volker Lohweg, Hrsg. 2020. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018. Bd. 12. Technologien für die intelligente Automation. Berlin, Heidelberg: Springer Vieweg. doi:https://doi.org/10.1007/978-3-662-59895-5, ."},"volume":12,"title":"Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018","language":[{"iso":"ger"}],"keyword":["Industrielle Kommunikationstechnik Industrielle Bildverarbeitung Network reliability and redundancy methods Networked Control Systems Wireless real-time communication Open Access quality control","reliability","safety and risk"],"oa":"1","date_updated":"2025-05-12T08:07:26Z","editor":[{"first_name":"Jürgen","id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen"},{"last_name":"Lohweg","first_name":"Volker","full_name":"Lohweg, Volker","id":"1804","orcid":"0000-0002-3325-7887"}],"date_created":"2021-02-02T13:12:47Z","publication_identifier":{"eisbn":["978-3-662-59895-5"],"issn":["2522-8579"],"eissn":["2522-8587"],"isbn":["978-3-662-59894-8"]}},{"_id":"4852","language":[{"iso":"eng"}],"user_id":"45673","date_updated":"2023-03-15T13:49:56Z","date_created":"2021-02-02T13:16:03Z","type":"conference","status":"public","author":[{"id":"76628","first_name":"Lukas","full_name":"Martenvormfelde, Lukas","last_name":"Martenvormfelde"},{"last_name":"Neumann","id":"61915","full_name":"Neumann, Arne","first_name":"Arne"},{"id":"1710","last_name":"Wisniewski","full_name":"Wisniewski, Lukasz","first_name":"Lukasz"},{"first_name":"Jürgen","id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen"}],"year":2020,"conference":{"location":"Wien","name":"25th International Conference on Emerging Technologies and Factory Automation IEE"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"citation":{"ieee":"L. Martenvormfelde, A. Neumann, L. Wisniewski, and J. Jasperneite, “A Simulation Model for Integrating 5G into Time Sensitive Networking as a Transparent Bridge,” presented at the 25th International Conference on Emerging Technologies and Factory Automation IEE, Wien, 2020.","ama":"Martenvormfelde L, Neumann A, Wisniewski L, Jasperneite J. A Simulation Model for Integrating 5G into Time Sensitive Networking as a Transparent Bridge. In: ; 2020.","chicago":"Martenvormfelde, Lukas, Arne Neumann, Lukasz Wisniewski, and Jürgen Jasperneite. “A Simulation Model for Integrating 5G into Time Sensitive Networking as a Transparent Bridge,” 2020.","apa":"Martenvormfelde, L., Neumann, A., Wisniewski, L., & Jasperneite, J. (2020). A Simulation Model for Integrating 5G into Time Sensitive Networking as a Transparent Bridge. Presented at the 25th International Conference on Emerging Technologies and Factory Automation IEE, Wien.","mla":"Martenvormfelde, Lukas, et al. A Simulation Model for Integrating 5G into Time Sensitive Networking as a Transparent Bridge. 2020.","havard":"L. Martenvormfelde, A. Neumann, L. Wisniewski, J. Jasperneite, A Simulation Model for Integrating 5G into Time Sensitive Networking as a Transparent Bridge, in: 2020.","bjps":"Martenvormfelde L et al. (2020) A Simulation Model for Integrating 5G into Time Sensitive Networking as a Transparent Bridge.","ufg":"Martenvormfelde, Lukas et. al. (2020): A Simulation Model for Integrating 5G into Time Sensitive Networking as a Transparent Bridge, in: .","van":"Martenvormfelde L, Neumann A, Wisniewski L, Jasperneite J. A Simulation Model for Integrating 5G into Time Sensitive Networking as a Transparent Bridge. In 2020.","din1505-2-1":"Martenvormfelde, Lukas ; Neumann, Arne ; Wisniewski, Lukasz ; Jasperneite, Jürgen: A Simulation Model for Integrating 5G into Time Sensitive Networking as a Transparent Bridge. In: , 2020","chicago-de":"Martenvormfelde, Lukas, Arne Neumann, Lukasz Wisniewski und Jürgen Jasperneite. 2020. A Simulation Model for Integrating 5G into Time Sensitive Networking as a Transparent Bridge. In: .","short":"L. Martenvormfelde, A. Neumann, L. Wisniewski, J. Jasperneite, in: 2020."},"title":"A Simulation Model for Integrating 5G into Time Sensitive Networking as a Transparent Bridge"},{"status":"public","author":[{"first_name":"Jürgen","id":"1899","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite"}],"year":2020,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"location":"Helsinki","name":"Program Launch SUSTAINABLE MANUFACTURING FINLAND Scandic Park"},"citation":{"ieee":"J. Jasperneite, “SmartfactoryOWL - Connecting Science and Industry for creating advanced Automation Technologies,” presented at the Program Launch SUSTAINABLE MANUFACTURING FINLAND Scandic Park, Helsinki, 2020.","ama":"Jasperneite J. SmartfactoryOWL - Connecting Science and Industry for creating advanced Automation Technologies. In: ; 2020.","apa":"Jasperneite, J. (2020). SmartfactoryOWL - Connecting Science and Industry for creating advanced Automation Technologies. Presented at the Program Launch SUSTAINABLE MANUFACTURING FINLAND Scandic Park, Helsinki.","chicago":"Jasperneite, Jürgen. “SmartfactoryOWL - Connecting Science and Industry for Creating Advanced Automation Technologies,” 2020.","van":"Jasperneite J. SmartfactoryOWL - Connecting Science and Industry for creating advanced Automation Technologies. In 2020.","bjps":"Jasperneite J (2020) SmartfactoryOWL - Connecting Science and Industry for Creating Advanced Automation Technologies.","havard":"J. Jasperneite, SmartfactoryOWL - Connecting Science and Industry for creating advanced Automation Technologies, in: 2020.","mla":"Jasperneite, Jürgen. SmartfactoryOWL - Connecting Science and Industry for Creating Advanced Automation Technologies. 2020.","ufg":"Jasperneite, Jürgen (2020): SmartfactoryOWL - Connecting Science and Industry for creating advanced Automation Technologies, in: .","short":"J. Jasperneite, in: 2020.","chicago-de":"Jasperneite, Jürgen. 2020. SmartfactoryOWL - Connecting Science and Industry for creating advanced Automation Technologies. In: .","din1505-2-1":"Jasperneite, Jürgen: SmartfactoryOWL - Connecting Science and Industry for creating advanced Automation Technologies. In: , 2020"},"title":"SmartfactoryOWL - Connecting Science and Industry for creating advanced Automation Technologies","_id":"4855","language":[{"iso":"eng"}],"user_id":"45673","date_updated":"2023-03-15T13:49:56Z","date_created":"2021-02-02T13:20:59Z","type":"conference"},{"date_updated":"2023-03-15T13:49:56Z","user_id":"45673","type":"journal_article","date_created":"2021-02-02T13:23:10Z","publication":"IEEE Industrial Electronics Magazine ","_id":"4856","language":[{"iso":"eng"}],"citation":{"ama":"Jasperneite J, Sauter T, Wollschläger M. Why We Need Automation Models: Handling Complexity in Industry 4.0 and the Internet of Things. IEEE Industrial Electronics Magazine . 2020:29-40.","ieee":"J. Jasperneite, T. Sauter, and M. Wollschläger, “Why We Need Automation Models: Handling Complexity in Industry 4.0 and the Internet of Things,” IEEE Industrial Electronics Magazine , pp. 29–40, 2020.","mla":"Jasperneite, Jürgen, et al. “Why We Need Automation Models: Handling Complexity in Industry 4.0 and the Internet of Things.” IEEE Industrial Electronics Magazine , 2020, pp. 29–40.","havard":"J. Jasperneite, T. Sauter, M. Wollschläger, Why We Need Automation Models: Handling Complexity in Industry 4.0 and the Internet of Things, IEEE Industrial Electronics Magazine . (2020) 29–40.","bjps":"Jasperneite J, Sauter T and Wollschläger M (2020) Why We Need Automation Models: Handling Complexity in Industry 4.0 and the Internet of Things. IEEE Industrial Electronics Magazine 29–40.","ufg":"Jasperneite, Jürgen et. al. (2020): Why We Need Automation Models: Handling Complexity in Industry 4.0 and the Internet of Things, in: IEEE Industrial Electronics Magazine , S. 29–40.","van":"Jasperneite J, Sauter T, Wollschläger M. Why We Need Automation Models: Handling Complexity in Industry 4.0 and the Internet of Things. IEEE Industrial Electronics Magazine . 2020;29–40.","chicago":"Jasperneite, Jürgen, Thilo Sauter, and Martin Wollschläger. “Why We Need Automation Models: Handling Complexity in Industry 4.0 and the Internet of Things.” IEEE Industrial Electronics Magazine , 2020, 29–40.","apa":"Jasperneite, J., Sauter, T., & Wollschläger, M. (2020). Why We Need Automation Models: Handling Complexity in Industry 4.0 and the Internet of Things. IEEE Industrial Electronics Magazine , 29–40.","chicago-de":"Jasperneite, Jürgen, Thilo Sauter und Martin Wollschläger. 2020. Why We Need Automation Models: Handling Complexity in Industry 4.0 and the Internet of Things. IEEE Industrial Electronics Magazine : 29–40.","din1505-2-1":"Jasperneite, Jürgen ; Sauter, Thilo ; Wollschläger, Martin: Why We Need Automation Models: Handling Complexity in Industry 4.0 and the Internet of Things. In: IEEE Industrial Electronics Magazine (2020), S. 29–40","short":"J. Jasperneite, T. Sauter, M. Wollschläger, IEEE Industrial Electronics Magazine (2020) 29–40."},"title":"Why We Need Automation Models: Handling Complexity in Industry 4.0 and the Internet of Things","page":"29-40","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"first_name":"Jürgen","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","id":"1899"},{"first_name":"Thilo","last_name":"Sauter","full_name":"Sauter, Thilo"},{"first_name":"Martin","full_name":"Wollschläger, Martin","last_name":"Wollschläger"}],"year":2020},{"place":"[Piscataway, NJ]","doi":"10.1109/wfcs47810.2020.9114506","_id":"4857","user_id":"83781","type":"conference","publisher":"IEEE","conference":{"end_date":"2020-04-29","start_date":"2020-04-27","location":"Porto, PORTUGAL","name":"16th IEEE International Conference on Factory Communication Systems (WFCS)"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"abstract":[{"text":"Increasing heterogeneity of industrial network systems is a fact and the chances that in the future one communication standard will be able to fulfill the requirements of all possible applications are utopian. With the increasing number of communication systems, their management, configuration, and maintenance become a significant issue. Additionally, due to the increasing amount of network services and traffic, the management of available network resources and the possibility of delivering certain levels of communication quality of service, especially across different network solutions becomes a big challenge. Therefore, in this paper a Controller of Controllers (CoC) concept for management of heterogeneous industrial networks is proposed. The concept is designed to support still widely spread legacy fieldbus systems, different Ethernet-based industrial solutions, and potentially upcoming network technologies. The goal is achieved by leveraging state-of-the-art architectural concepts such as software-defined networks, which allows for integration of abstract models in network management. The concept is described and discussed by way of a demonstrator concept for a heterogeneous system of fieldbus and Ethernet-based time-sensitive networks.","lang":"eng"}],"publication_status":"published","language":[{"iso":"eng"}],"keyword":["CYBER-PHYSICAL SYSTEMS"],"date_updated":"2025-06-26T13:24:15Z","editor":[{"full_name":"Almeida, Lus","last_name":"Almeida","first_name":"Lus"},{"first_name":"Ramez","last_name":"Daoud","full_name":"Daoud, Ramez"},{"full_name":"Mifdaoui, Ahlem","last_name":"Mifdaoui","first_name":"Ahlem"},{"last_name":"Golatowski","first_name":"Frank","full_name":"Golatowski, Frank"},{"full_name":"Amer, Hassanein","last_name":"Amer","first_name":"Hassanein"},{"full_name":"Santos, Pedro","first_name":"Pedro","last_name":"Santos"}],"corporate_editor":["Institute of Electrical and Electronics Engineers"],"date_created":"2021-02-02T13:29:38Z","publication_identifier":{"isbn":["978-1-7281-5298-1"],"eisbn":["978-1-7281-5297-4","978-1-7281-5296-7 "]},"publication":"16th IEEE International Conference on Factory Communication Systems (WFCS)","page":"35-42","status":"public","year":"2020","author":[{"first_name":"F.","full_name":"Ansah, F.","last_name":"Ansah"},{"full_name":"Soler Perez Olaya, S.","first_name":"S.","last_name":"Soler Perez Olaya"},{"full_name":"Krummacker, Dennis","last_name":"Krummacker","first_name":"Dennis"},{"first_name":"C.","full_name":"Fischer, C.","last_name":"Fischer"},{"first_name":"A.","full_name":"Winkel, A.","last_name":"Winkel"},{"first_name":"René","last_name":"Guillaume","full_name":"Guillaume, René"},{"id":"1710","first_name":"Lukasz","full_name":"Wisniewski, Lukasz","last_name":"Wisniewski"},{"first_name":"Marco","last_name":"Ehrlich","id":"61562","full_name":"Ehrlich, Marco"},{"first_name":"W.","last_name":"Mandarawi","full_name":"Mandarawi, W."},{"orcid":"0000-0002-0133-0656","id":"1486","last_name":"Trsek","full_name":"Trsek, Henning","first_name":"Henning"},{"first_name":"Hermann","last_name":"de Meer","full_name":"de Meer, Hermann"},{"full_name":"Wollschlaeger, Martin","last_name":"Wollschlaeger","first_name":"Martin"},{"first_name":"Hans D.","full_name":"Schotten, Hans D.","last_name":"Schotten"},{"first_name":"Jürgen","id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen"}],"citation":{"van":"Ansah F, Soler Perez Olaya S, Krummacker D, Fischer C, Winkel A, Guillaume R, et al. Controller of Controllers Architecture for Management of Heterogeneous Industrial Networks. In: Almeida L, Daoud R, Mifdaoui A, Golatowski F, Amer H, Santos P, et al., editors. 16th IEEE International Conference on Factory Communication Systems (WFCS). [Piscataway, NJ]: IEEE; 2020. p. 35–42.","mla":"Ansah, F., et al. “Controller of Controllers Architecture for Management of Heterogeneous Industrial Networks.” 16th IEEE International Conference on Factory Communication Systems (WFCS), edited by Lus Almeida et al., IEEE, 2020, pp. 35–42, https://doi.org/10.1109/wfcs47810.2020.9114506.","havard":"F. Ansah, S. Soler Perez Olaya, D. Krummacker, C. Fischer, A. Winkel, R. Guillaume, L. Wisniewski, M. Ehrlich, W. Mandarawi, H. Trsek, H. de Meer, M. Wollschlaeger, H.D. Schotten, J. Jasperneite, Controller of Controllers Architecture for Management of Heterogeneous Industrial Networks, in: L. Almeida, R. Daoud, A. Mifdaoui, F. Golatowski, H. Amer, P. Santos, Institute of Electrical and Electronics Engineers (Eds.), 16th IEEE International Conference on Factory Communication Systems (WFCS), IEEE, [Piscataway, NJ], 2020: pp. 35–42.","bjps":"Ansah F et al. (2020) Controller of Controllers Architecture for Management of Heterogeneous Industrial Networks. In Almeida L et al. (eds), 16th IEEE International Conference on Factory Communication Systems (WFCS). [Piscataway, NJ]: IEEE, pp. 35–42.","ufg":"Ansah, F. u. a.: Controller of Controllers Architecture for Management of Heterogeneous Industrial Networks, in: Almeida, Lus u. a. (Hgg.): 16th IEEE International Conference on Factory Communication Systems (WFCS), [Piscataway, NJ] 2020, S. 35–42.","apa":"Ansah, F., Soler Perez Olaya, S., Krummacker, D., Fischer, C., Winkel, A., Guillaume, R., Wisniewski, L., Ehrlich, M., Mandarawi, W., Trsek, H., de Meer, H., Wollschlaeger, M., Schotten, H. D., & Jasperneite, J. (2020). Controller of Controllers Architecture for Management of Heterogeneous Industrial Networks. In L. Almeida, R. Daoud, A. Mifdaoui, F. Golatowski, H. Amer, P. Santos, & Institute of Electrical and Electronics Engineers (Eds.), 16th IEEE International Conference on Factory Communication Systems (WFCS) (pp. 35–42). IEEE. https://doi.org/10.1109/wfcs47810.2020.9114506","chicago":"Ansah, F., S. Soler Perez Olaya, Dennis Krummacker, C. Fischer, A. Winkel, René Guillaume, Lukasz Wisniewski, et al. “Controller of Controllers Architecture for Management of Heterogeneous Industrial Networks.” In 16th IEEE International Conference on Factory Communication Systems (WFCS), edited by Lus Almeida, Ramez Daoud, Ahlem Mifdaoui, Frank Golatowski, Hassanein Amer, Pedro Santos, and Institute of Electrical and Electronics Engineers, 35–42. [Piscataway, NJ]: IEEE, 2020. https://doi.org/10.1109/wfcs47810.2020.9114506.","short":"F. Ansah, S. Soler Perez Olaya, D. Krummacker, C. Fischer, A. Winkel, R. Guillaume, L. Wisniewski, M. Ehrlich, W. Mandarawi, H. Trsek, H. de Meer, M. Wollschlaeger, H.D. Schotten, J. Jasperneite, in: L. Almeida, R. Daoud, A. Mifdaoui, F. Golatowski, H. Amer, P. Santos, Institute of Electrical and Electronics Engineers (Eds.), 16th IEEE International Conference on Factory Communication Systems (WFCS), IEEE, [Piscataway, NJ], 2020, pp. 35–42.","chicago-de":"Ansah, F., S. Soler Perez Olaya, Dennis Krummacker, C. Fischer, A. Winkel, René Guillaume, Lukasz Wisniewski, u. a. 2020. Controller of Controllers Architecture for Management of Heterogeneous Industrial Networks. In: 16th IEEE International Conference on Factory Communication Systems (WFCS), hg. von Lus Almeida, Ramez Daoud, Ahlem Mifdaoui, Frank Golatowski, Hassanein Amer, Pedro Santos, und Institute of Electrical and Electronics Engineers, 35–42. [Piscataway, NJ]: IEEE. doi:10.1109/wfcs47810.2020.9114506, .","din1505-2-1":"Ansah, F. ; Soler Perez Olaya, S. ; Krummacker, Dennis ; Fischer, C. ; Winkel, A. ; Guillaume, René ; Wisniewski, Lukasz ; Ehrlich, Marco ; u. a.: Controller of Controllers Architecture for Management of Heterogeneous Industrial Networks. In: Almeida, L. ; Daoud, R. ; Mifdaoui, A. ; Golatowski, F. ; Amer, H. ; Santos, P. ; Institute of Electrical and Electronics Engineers (Hrsg.): 16th IEEE International Conference on Factory Communication Systems (WFCS). [Piscataway, NJ] : IEEE, 2020, S. 35–42","ama":"Ansah F, Soler Perez Olaya S, Krummacker D, et al. Controller of Controllers Architecture for Management of Heterogeneous Industrial Networks. In: Almeida L, Daoud R, Mifdaoui A, et al., eds. 16th IEEE International Conference on Factory Communication Systems (WFCS). IEEE; 2020:35-42. doi:10.1109/wfcs47810.2020.9114506","ieee":"F. Ansah et al., “Controller of Controllers Architecture for Management of Heterogeneous Industrial Networks,” in 16th IEEE International Conference on Factory Communication Systems (WFCS), Porto, PORTUGAL, 2020, pp. 35–42. doi: 10.1109/wfcs47810.2020.9114506."},"title":"Controller of Controllers Architecture for Management of Heterogeneous Industrial Networks"},{"status":"public","year":2020,"author":[{"full_name":"Majumder, Mainak","first_name":"Mainak","last_name":"Majumder","id":"73861"},{"last_name":"Perez Olaya","first_name":"Santiago Soler","full_name":"Perez Olaya, Santiago Soler"},{"first_name":"Marco","full_name":"Ehrlich, Marco","last_name":"Ehrlich","id":"61562"},{"first_name":"Lukasz","id":"1710","last_name":"Wisniewski","full_name":"Wisniewski, Lukasz"},{"last_name":"Jasperneite","first_name":"Jürgen","full_name":"Jasperneite, Jürgen","id":"1899"},{"full_name":"Wollschlaeger, Martin","last_name":"Wollschlaeger","first_name":"Martin"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"name":"IEEE WFCS 2020 IEEE","location":"Porto, Portugal"},"citation":{"chicago":"Majumder, Mainak, Santiago Soler Perez Olaya, Marco Ehrlich, Lukasz Wisniewski, Jürgen Jasperneite, and Martin Wollschlaeger. “Work-in-Progress: Semantic Knowledge Base as a Solution for Heterogeneous Industrial Network Management,” 2020.","apa":"Majumder, M., Perez Olaya, S. S., Ehrlich, M., Wisniewski, L., Jasperneite, J., & Wollschlaeger, M. (2020). Work-in-Progress: Semantic Knowledge Base as a Solution for Heterogeneous Industrial Network Management. Presented at the IEEE WFCS 2020 IEEE, Porto, Portugal.","havard":"M. Majumder, S.S. Perez Olaya, M. Ehrlich, L. Wisniewski, J. Jasperneite, M. Wollschlaeger, Work-in-Progress: Semantic Knowledge Base as a Solution for Heterogeneous Industrial Network Management, in: 2020.","bjps":"Majumder M et al. (2020) Work-in-Progress: Semantic Knowledge Base as a Solution for Heterogeneous Industrial Network Management.","mla":"Majumder, Mainak, et al. Work-in-Progress: Semantic Knowledge Base as a Solution for Heterogeneous Industrial Network Management. 2020.","ufg":"Majumder, Mainak et. al. (2020): Work-in-Progress: Semantic Knowledge Base as a Solution for Heterogeneous Industrial Network Management, in: .","van":"Majumder M, Perez Olaya SS, Ehrlich M, Wisniewski L, Jasperneite J, Wollschlaeger M. Work-in-Progress: Semantic Knowledge Base as a Solution for Heterogeneous Industrial Network Management. In 2020.","din1505-2-1":"Majumder, Mainak ; Perez Olaya, Santiago Soler ; Ehrlich, Marco ; Wisniewski, Lukasz ; Jasperneite, Jürgen ; Wollschlaeger, Martin: Work-in-Progress: Semantic Knowledge Base as a Solution for Heterogeneous Industrial Network Management. In: , 2020","chicago-de":"Majumder, Mainak, Santiago Soler Perez Olaya, Marco Ehrlich, Lukasz Wisniewski, Jürgen Jasperneite und Martin Wollschlaeger. 2020. Work-in-Progress: Semantic Knowledge Base as a Solution for Heterogeneous Industrial Network Management. In: .","short":"M. Majumder, S.S. Perez Olaya, M. Ehrlich, L. Wisniewski, J. Jasperneite, M. Wollschlaeger, in: 2020.","ieee":"M. Majumder, S. S. Perez Olaya, M. Ehrlich, L. Wisniewski, J. Jasperneite, and M. Wollschlaeger, “Work-in-Progress: Semantic Knowledge Base as a Solution for Heterogeneous Industrial Network Management,” presented at the IEEE WFCS 2020 IEEE, Porto, Portugal, 2020.","ama":"Majumder M, Perez Olaya SS, Ehrlich M, Wisniewski L, Jasperneite J, Wollschlaeger M. Work-in-Progress: Semantic Knowledge Base as a Solution for Heterogeneous Industrial Network Management. In: ; 2020."},"title":"Work-in-Progress: Semantic Knowledge Base as a Solution for Heterogeneous Industrial Network Management","language":[{"iso":"eng"}],"_id":"4858","user_id":"45673","date_updated":"2023-03-15T13:49:56Z","date_created":"2021-02-02T13:32:46Z","type":"conference"},{"title":"Plug & Play Retrofitting Approach for Data Integration to the Cloud","citation":{"ieee":"S. K. Panda, L. Wisniewski, M. Ehrlich, M. Majumder, and J. Jasperneite, “Plug & Play Retrofitting Approach for Data Integration to the Cloud,” presented at the IEEE, Porto, Portugal, 2020, p. 8.","ama":"Panda SK, Wisniewski L, Ehrlich M, Majumder M, Jasperneite J. Plug & Play Retrofitting Approach for Data Integration to the Cloud. In: ; 2020:8.","apa":"Panda, S. K., Wisniewski, L., Ehrlich, M., Majumder, M., & Jasperneite, J. (2020). Plug & Play Retrofitting Approach for Data Integration to the Cloud (p. 8). Presented at the IEEE, Porto, Portugal.","chicago":"Panda, Santosh Kumar, Lukasz Wisniewski, Marco Ehrlich, Mainak Majumder, and Jürgen Jasperneite. “Plug & Play Retrofitting Approach for Data Integration to the Cloud,” 8, 2020.","van":"Panda SK, Wisniewski L, Ehrlich M, Majumder M, Jasperneite J. Plug & Play Retrofitting Approach for Data Integration to the Cloud. In 2020. p. 8.","bjps":"Panda SK et al. (2020) Plug & Play Retrofitting Approach for Data Integration to the Cloud. p. 8.","mla":"Panda, Santosh Kumar, et al. Plug & Play Retrofitting Approach for Data Integration to the Cloud. 2020, p. 8.","havard":"S.K. Panda, L. Wisniewski, M. Ehrlich, M. Majumder, J. Jasperneite, Plug & Play Retrofitting Approach for Data Integration to the Cloud, in: 2020: p. 8.","ufg":"Panda, Santosh Kumar et. al. (2020): Plug & Play Retrofitting Approach for Data Integration to the Cloud, in: , S. 8.","short":"S.K. Panda, L. Wisniewski, M. Ehrlich, M. Majumder, J. Jasperneite, in: 2020, p. 8.","chicago-de":"Panda, Santosh Kumar, Lukasz Wisniewski, Marco Ehrlich, Mainak Majumder und Jürgen Jasperneite. 2020. Plug & Play Retrofitting Approach for Data Integration to the Cloud. In: , 8.","din1505-2-1":"Panda, Santosh Kumar ; Wisniewski, Lukasz ; Ehrlich, Marco ; Majumder, Mainak ; Jasperneite, Jürgen: Plug & Play Retrofitting Approach for Data Integration to the Cloud. In: , 2020, S. 8"},"author":[{"full_name":"Panda, Santosh Kumar","first_name":"Santosh Kumar","last_name":"Panda","id":"71899"},{"first_name":"Lukasz","last_name":"Wisniewski","full_name":"Wisniewski, Lukasz","id":"1710"},{"first_name":"Marco","id":"61562","full_name":"Ehrlich, Marco","last_name":"Ehrlich"},{"last_name":"Majumder","id":"73861","full_name":"Majumder, Mainak","first_name":"Mainak"},{"full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","first_name":"Jürgen","id":"1899"}],"year":2020,"conference":{"location":"Porto, Portugal","name":"IEEE"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public","page":"8","type":"conference","date_created":"2021-02-02T13:35:10Z","user_id":"45673","date_updated":"2023-03-15T13:49:56Z","_id":"4861","language":[{"iso":"eng"}]},{"type":"preprint","date_created":"2021-02-02T13:41:33Z","user_id":"83781","date_updated":"2023-08-14T13:35:42Z","oa":"1","language":[{"iso":"ger"}],"_id":"4864","title":"Vorstudie Vernetzte Mobilität OWL","citation":{"din1505-2-1":"Flasskamp, Martin ; Fast, Harry ; Fliedner, Niels Hendrik ; Henze-Sakowsky, Annika ; Hufen, Florian ; Lohmann, Paul ; Lück, Söhnke ; Schmelter, Andreas ; u. a.: Vorstudie Vernetzte Mobilität OWL, Verbundforschungsprojekts MOVE-IN-OWL (2020)","chicago-de":"Flasskamp, Martin, Harry Fast, Niels Hendrik Fliedner, Annika Henze-Sakowsky, Florian Hufen, Paul Lohmann, Söhnke Lück, u. a. 2020. Vorstudie Vernetzte Mobilität OWL. Verbundforschungsprojekts MOVE-IN-OWL.","short":"M. Flasskamp, H. Fast, N.H. Fliedner, A. Henze-Sakowsky, F. Hufen, P. Lohmann, S. Lück, A. Schmelter, T. Jungeblut, J. Jasperneite, R. Naumann, U. Rückert, T. Schulte, S. Witte, (2020).","havard":"M. Flasskamp, H. Fast, N.H. Fliedner, A. Henze-Sakowsky, F. Hufen, P. Lohmann, S. Lück, A. Schmelter, T. Jungeblut, J. Jasperneite, R. Naumann, U. Rückert, T. Schulte, S. Witte, Vorstudie Vernetzte Mobilität OWL, (2020).","bjps":"Flasskamp M et al. (2020) Vorstudie Vernetzte Mobilität OWL.","mla":"Flasskamp, Martin, et al. Vorstudie Vernetzte Mobilität OWL. Verbundforschungsprojekts MOVE-IN-OWL, 2020.","ufg":"Flasskamp, Martin u. a.: Vorstudie Vernetzte Mobilität OWL, o. O. 2020.","van":"Flasskamp M, Fast H, Fliedner NH, Henze-Sakowsky A, Hufen F, Lohmann P, et al. Vorstudie Vernetzte Mobilität OWL. Verbundforschungsprojekts MOVE-IN-OWL; 2020.","chicago":"Flasskamp, Martin, Harry Fast, Niels Hendrik Fliedner, Annika Henze-Sakowsky, Florian Hufen, Paul Lohmann, Söhnke Lück, et al. “Vorstudie Vernetzte Mobilität OWL.” Verbundforschungsprojekts MOVE-IN-OWL, 2020.","apa":"Flasskamp, M., Fast, H., Fliedner, N. H., Henze-Sakowsky, A., Hufen, F., Lohmann, P., Lück, S., Schmelter, A., Jungeblut, T., Jasperneite, J., Naumann, R., Rückert, U., Schulte, T., & Witte, S. (2020). Vorstudie Vernetzte Mobilität OWL. Verbundforschungsprojekts MOVE-IN-OWL.","ama":"Flasskamp M, Fast H, Fliedner NH, et al. Vorstudie Vernetzte Mobilität OWL. Published online 2020.","ieee":"M. Flasskamp et al., “Vorstudie Vernetzte Mobilität OWL.” Verbundforschungsprojekts MOVE-IN-OWL, 2020."},"publication_status":"published","year":"2020","author":[{"first_name":"Martin","full_name":"Flasskamp, Martin","last_name":"Flasskamp"},{"first_name":"Harry","full_name":"Fast, Harry","last_name":"Fast","id":"51413"},{"full_name":"Fliedner, Niels Hendrik","first_name":"Niels Hendrik","id":"57956","last_name":"Fliedner","orcid":"0000-0003-0484-1328"},{"last_name":"Henze-Sakowsky","first_name":"Annika","full_name":"Henze-Sakowsky, Annika"},{"last_name":"Hufen","full_name":"Hufen, Florian","first_name":"Florian"},{"full_name":"Lohmann, Paul","first_name":"Paul","last_name":"Lohmann"},{"full_name":"Lück, Söhnke","first_name":"Söhnke","last_name":"Lück"},{"first_name":"Andreas","full_name":"Schmelter, Andreas","last_name":"Schmelter","id":"10982"},{"first_name":"Thorsten","full_name":"Jungeblut, Thorsten","last_name":"Jungeblut"},{"first_name":"Jürgen","last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen"},{"full_name":"Naumann, Rolf","last_name":"Naumann","first_name":"Rolf"},{"first_name":"Ulrich","full_name":"Rückert, Ulrich","last_name":"Rückert"},{"last_name":"Schulte","first_name":"Thomas","id":"46242","full_name":"Schulte, Thomas"},{"full_name":"Witte, Stefan","last_name":"Witte","id":"1605","first_name":"Stefan"}],"main_file_link":[{"url":"https://move-in-owl.de/wp-content/uploads/2020/07/Vorstudie-Vernetzte-Mobilitaet_20200707.pdf","open_access":"1"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public","publisher":"Verbundforschungsprojekts MOVE-IN-OWL"},{"type":"conference","date_created":"2021-02-02T13:44:36Z","user_id":"45673","date_updated":"2023-03-15T13:49:56Z","language":[{"iso":"eng"}],"_id":"4870","title":"Configuration Solution for TSN-based Industrial Networks utilizing SDN and OPC UA","citation":{"short":"T. Kobzan, I. Blöcher, M. Hendel, S. Althoff, A. Gerhard, S. Schriegel, J. Jasperneite, in: 2020.","din1505-2-1":"Kobzan, Thomas ; Blöcher, Immanuel ; Hendel, Maximilian ; Althoff, Simon ; Gerhard, Alissa ; Schriegel, Sebastian ; Jasperneite, Jürgen: Configuration Solution for TSN-based Industrial Networks utilizing SDN and OPC UA. In: , 2020","chicago-de":"Kobzan, Thomas, Immanuel Blöcher, Maximilian Hendel, Simon Althoff, Alissa Gerhard, Sebastian Schriegel und Jürgen Jasperneite. 2020. Configuration Solution for TSN-based Industrial Networks utilizing SDN and OPC UA. In: .","apa":"Kobzan, T., Blöcher, I., Hendel, M., Althoff, S., Gerhard, A., Schriegel, S., & Jasperneite, J. (2020). Configuration Solution for TSN-based Industrial Networks utilizing SDN and OPC UA. Presented at the 25th International Conference on Emerging Technologies and Factory Automation (ETFA) , Vienna, Austria.","chicago":"Kobzan, Thomas, Immanuel Blöcher, Maximilian Hendel, Simon Althoff, Alissa Gerhard, Sebastian Schriegel, and Jürgen Jasperneite. “Configuration Solution for TSN-Based Industrial Networks Utilizing SDN and OPC UA,” 2020.","van":"Kobzan T, Blöcher I, Hendel M, Althoff S, Gerhard A, Schriegel S, et al. Configuration Solution for TSN-based Industrial Networks utilizing SDN and OPC UA. In 2020.","mla":"Kobzan, Thomas, et al. Configuration Solution for TSN-Based Industrial Networks Utilizing SDN and OPC UA. 2020.","havard":"T. Kobzan, I. Blöcher, M. Hendel, S. Althoff, A. Gerhard, S. Schriegel, J. Jasperneite, Configuration Solution for TSN-based Industrial Networks utilizing SDN and OPC UA, in: 2020.","bjps":"Kobzan T et al. (2020) Configuration Solution for TSN-Based Industrial Networks Utilizing SDN and OPC UA.","ufg":"Kobzan, Thomas et. al. (2020): Configuration Solution for TSN-based Industrial Networks utilizing SDN and OPC UA, in: .","ieee":"T. Kobzan et al., “Configuration Solution for TSN-based Industrial Networks utilizing SDN and OPC UA,” presented at the 25th International Conference on Emerging Technologies and Factory Automation (ETFA) , Vienna, Austria, 2020.","ama":"Kobzan T, Blöcher I, Hendel M, et al. Configuration Solution for TSN-based Industrial Networks utilizing SDN and OPC UA. In: ; 2020."},"author":[{"full_name":"Kobzan, Thomas","last_name":"Kobzan","first_name":"Thomas"},{"full_name":"Blöcher, Immanuel","first_name":"Immanuel","last_name":"Blöcher"},{"last_name":"Hendel","first_name":"Maximilian","full_name":"Hendel, Maximilian"},{"last_name":"Althoff","first_name":"Simon","full_name":"Althoff, Simon"},{"last_name":"Gerhard","full_name":"Gerhard, Alissa","first_name":"Alissa"},{"last_name":"Schriegel","first_name":"Sebastian","full_name":"Schriegel, Sebastian"},{"id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen","last_name":"Jasperneite"}],"year":2020,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"location":"Vienna, Austria","name":"25th International Conference on Emerging Technologies and Factory Automation (ETFA) "},"status":"public"},{"date_updated":"2023-03-15T13:49:56Z","user_id":"45673","type":"conference","date_created":"2021-02-02T13:49:01Z","language":[{"iso":"eng"}],"_id":"4874","citation":{"chicago":"Panda, Santosh Kumar, Mainak Majumder, Lukasz Wisniewski, and Jürgen Jasperneite. “Real-Time Industrial Communication by Using OPC UA Field Level Communication,” 2020.","apa":"Panda, S. K., Majumder, M., Wisniewski, L., & Jasperneite, J. (2020). Real-time Industrial Communication by using OPC UA Field Level Communication. Presented at the IEEE ETFA 2020 IEEE, Vienna, Austria.","havard":"S.K. Panda, M. Majumder, L. Wisniewski, J. Jasperneite, Real-time Industrial Communication by using OPC UA Field Level Communication, in: 2020.","bjps":"Panda SK et al. (2020) Real-Time Industrial Communication by Using OPC UA Field Level Communication.","mla":"Panda, Santosh Kumar, et al. Real-Time Industrial Communication by Using OPC UA Field Level Communication. 2020.","ufg":"Panda, Santosh Kumar et. al. (2020): Real-time Industrial Communication by using OPC UA Field Level Communication, in: .","van":"Panda SK, Majumder M, Wisniewski L, Jasperneite J. Real-time Industrial Communication by using OPC UA Field Level Communication. In 2020.","din1505-2-1":"Panda, Santosh Kumar ; Majumder, Mainak ; Wisniewski, Lukasz ; Jasperneite, Jürgen: Real-time Industrial Communication by using OPC UA Field Level Communication. In: , 2020","chicago-de":"Panda, Santosh Kumar, Mainak Majumder, Lukasz Wisniewski und Jürgen Jasperneite. 2020. Real-time Industrial Communication by using OPC UA Field Level Communication. In: .","short":"S.K. Panda, M. Majumder, L. Wisniewski, J. Jasperneite, in: 2020.","ieee":"S. K. Panda, M. Majumder, L. Wisniewski, and J. Jasperneite, “Real-time Industrial Communication by using OPC UA Field Level Communication,” presented at the IEEE ETFA 2020 IEEE, Vienna, Austria, 2020.","ama":"Panda SK, Majumder M, Wisniewski L, Jasperneite J. Real-time Industrial Communication by using OPC UA Field Level Communication. In: ; 2020."},"title":"Real-time Industrial Communication by using OPC UA Field Level Communication","status":"public","conference":{"name":"IEEE ETFA 2020 IEEE","location":"Vienna, Austria"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2020,"author":[{"full_name":"Panda, Santosh Kumar","last_name":"Panda","id":"71899","first_name":"Santosh Kumar"},{"last_name":"Majumder","first_name":"Mainak","id":"73861","full_name":"Majumder, Mainak"},{"id":"1710","first_name":"Lukasz","last_name":"Wisniewski","full_name":"Wisniewski, Lukasz"},{"first_name":"Jürgen","last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen"}]},{"status":"public","year":2020,"author":[{"first_name":"Arnab","id":"74377","last_name":"Ghosh Chowdhury","full_name":"Ghosh Chowdhury, Arnab"},{"last_name":"Illian","first_name":"Marvin","full_name":"Illian, Marvin"},{"last_name":"Wisniewski","first_name":"Lukasz","full_name":"Wisniewski, Lukasz","id":"1710"},{"full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","id":"1899","first_name":"Jürgen"}],"conference":{"name":"IEEE ETFA 2020 IEEE","location":"Vienna, Austria"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"citation":{"ama":"Ghosh Chowdhury A, Illian M, Wisniewski L, Jasperneite J. An Approach for Data Pipeline with Distributed Query Engine for Industrial Applications. In: ; 2020.","ieee":"A. Ghosh Chowdhury, M. Illian, L. Wisniewski, and J. Jasperneite, “An Approach for Data Pipeline with Distributed Query Engine for Industrial Applications,” presented at the IEEE ETFA 2020 IEEE, Vienna, Austria, 2020.","havard":"A. Ghosh Chowdhury, M. Illian, L. Wisniewski, J. Jasperneite, An Approach for Data Pipeline with Distributed Query Engine for Industrial Applications, in: 2020.","mla":"Ghosh Chowdhury, Arnab, et al. An Approach for Data Pipeline with Distributed Query Engine for Industrial Applications. 2020.","bjps":"Ghosh Chowdhury A et al. (2020) An Approach for Data Pipeline with Distributed Query Engine for Industrial Applications.","ufg":"Ghosh Chowdhury, Arnab et. al. (2020): An Approach for Data Pipeline with Distributed Query Engine for Industrial Applications, in: .","van":"Ghosh Chowdhury A, Illian M, Wisniewski L, Jasperneite J. An Approach for Data Pipeline with Distributed Query Engine for Industrial Applications. In 2020.","chicago":"Ghosh Chowdhury, Arnab, Marvin Illian, Lukasz Wisniewski, and Jürgen Jasperneite. “An Approach for Data Pipeline with Distributed Query Engine for Industrial Applications,” 2020.","apa":"Ghosh Chowdhury, A., Illian, M., Wisniewski, L., & Jasperneite, J. (2020). An Approach for Data Pipeline with Distributed Query Engine for Industrial Applications. Presented at the IEEE ETFA 2020 IEEE, Vienna, Austria.","chicago-de":"Ghosh Chowdhury, Arnab, Marvin Illian, Lukasz Wisniewski und Jürgen Jasperneite. 2020. An Approach for Data Pipeline with Distributed Query Engine for Industrial Applications. In: .","din1505-2-1":"Ghosh Chowdhury, Arnab ; Illian, Marvin ; Wisniewski, Lukasz ; Jasperneite, Jürgen: An Approach for Data Pipeline with Distributed Query Engine for Industrial Applications. In: , 2020","short":"A. Ghosh Chowdhury, M. Illian, L. Wisniewski, J. Jasperneite, in: 2020."},"title":"An Approach for Data Pipeline with Distributed Query Engine for Industrial Applications","_id":"4875","language":[{"iso":"eng"}],"user_id":"45673","date_updated":"2023-03-15T13:49:56Z","date_created":"2021-02-02T13:51:00Z","type":"conference"},{"title":"Automatic Configuration of Programmable Industrial Networks by means of the Interaction of Applications. In: Jahreskolloquium Kommunikation in der Automation","citation":{"din1505-2-1":"Kobzan, Thomas ; Blöcher, Immanuel ; Althoff, Simon ; Hendel, Maximilian ; Schriegel, Sebastian ; Jasperneite, Jürgen: Automatic Configuration of Programmable Industrial Networks by means of the Interaction of Applications. In: Jahreskolloquium Kommunikation in der Automation. In: , 2020","chicago-de":"Kobzan, Thomas, Immanuel Blöcher, Simon Althoff, Maximilian Hendel, Sebastian Schriegel und Jürgen Jasperneite. 2020. Automatic Configuration of Programmable Industrial Networks by means of the Interaction of Applications. In: Jahreskolloquium Kommunikation in der Automation. In: .","short":"T. Kobzan, I. Blöcher, S. Althoff, M. Hendel, S. Schriegel, J. Jasperneite, in: 2020.","chicago":"Kobzan, Thomas, Immanuel Blöcher, Simon Althoff, Maximilian Hendel, Sebastian Schriegel, and Jürgen Jasperneite. “Automatic Configuration of Programmable Industrial Networks by Means of the Interaction of Applications. In: Jahreskolloquium Kommunikation in Der Automation,” 2020.","ieee":"T. Kobzan, I. Blöcher, S. Althoff, M. Hendel, S. Schriegel, and J. Jasperneite, “Automatic Configuration of Programmable Industrial Networks by means of the Interaction of Applications. In: Jahreskolloquium Kommunikation in der Automation,” presented at the Jahreskolloquium Kommunikation in der Automation In: Jahreskolloquium Kommunikation in der Automation , Lemgo, 2020.","apa":"Kobzan, T., Blöcher, I., Althoff, S., Hendel, M., Schriegel, S., & Jasperneite, J. (2020). Automatic Configuration of Programmable Industrial Networks by means of the Interaction of Applications. In: Jahreskolloquium Kommunikation in der Automation. Presented at the Jahreskolloquium Kommunikation in der Automation In: Jahreskolloquium Kommunikation in der Automation , Lemgo.","mla":"Kobzan, Thomas, et al. Automatic Configuration of Programmable Industrial Networks by Means of the Interaction of Applications. In: Jahreskolloquium Kommunikation in Der Automation. 2020.","havard":"T. Kobzan, I. Blöcher, S. Althoff, M. Hendel, S. Schriegel, J. Jasperneite, Automatic Configuration of Programmable Industrial Networks by means of the Interaction of Applications. In: Jahreskolloquium Kommunikation in der Automation, in: 2020.","bjps":"Kobzan T et al. (2020) Automatic Configuration of Programmable Industrial Networks by Means of the Interaction of Applications. In: Jahreskolloquium Kommunikation in Der Automation.","ufg":"Kobzan, Thomas et. al. (2020): Automatic Configuration of Programmable Industrial Networks by means of the Interaction of Applications. In: Jahreskolloquium Kommunikation in der Automation, in: .","ama":"Kobzan T, Blöcher I, Althoff S, Hendel M, Schriegel S, Jasperneite J. Automatic Configuration of Programmable Industrial Networks by means of the Interaction of Applications. In: Jahreskolloquium Kommunikation in der Automation. In: ; 2020.","van":"Kobzan T, Blöcher I, Althoff S, Hendel M, Schriegel S, Jasperneite J. Automatic Configuration of Programmable Industrial Networks by means of the Interaction of Applications. In: Jahreskolloquium Kommunikation in der Automation. In 2020."},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"name":"Jahreskolloquium Kommunikation in der Automation In: Jahreskolloquium Kommunikation in der Automation ","location":"Lemgo"},"year":2020,"author":[{"first_name":"Thomas","last_name":"Kobzan","full_name":"Kobzan, Thomas"},{"full_name":"Blöcher, Immanuel","first_name":"Immanuel","last_name":"Blöcher"},{"first_name":"Simon","full_name":"Althoff, Simon","last_name":"Althoff"},{"first_name":"Maximilian","full_name":"Hendel, Maximilian","last_name":"Hendel"},{"last_name":"Schriegel","first_name":"Sebastian","full_name":"Schriegel, Sebastian"},{"first_name":"Jürgen","full_name":"Jasperneite, Jürgen","id":"1899","last_name":"Jasperneite"}],"status":"public","date_created":"2021-02-02T13:55:20Z","type":"conference","date_updated":"2023-03-15T13:49:56Z","user_id":"45673","language":[{"iso":"eng"}],"_id":"4876"},{"_id":"4877","language":[{"iso":"eng"}],"user_id":"45673","date_updated":"2023-03-15T13:49:56Z","date_created":"2021-02-02T13:57:44Z","type":"conference","status":"public","year":2020,"author":[{"last_name":"Ehrlich","full_name":"Ehrlich, Marco","id":"61562","first_name":"Marco"},{"first_name":"Stefan","last_name":"Benk","id":"58957","full_name":"Benk, Stefan"},{"full_name":"Harder, Dimitri","last_name":"Harder","id":"69147","first_name":"Dimitri"},{"first_name":"Philip","full_name":"Kleen, Philip","last_name":"Kleen","id":"44776"},{"full_name":"Trsek, Henning","last_name":"Trsek","id":"1486","first_name":"Henning"},{"last_name":"Schriegel","full_name":"Schriegel, Sebastian","first_name":"Sebastian"},{"first_name":"Jürgen","id":"1899","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"name":"Jahreskolloquium Kommunikation in der Automation"},"citation":{"apa":"Ehrlich, M., Benk, S., Harder, D., Kleen, P., Trsek, H., Schriegel, S., & Jasperneite, J. (2020). Automatische Bewertung und Überwachung von Safety & Security Eigenschaften – Strukturierung und Ausblick. Presented at the Jahreskolloquium Kommunikation in der Automation.","ieee":"M. Ehrlich et al., “Automatische Bewertung und Überwachung von Safety & Security Eigenschaften – Strukturierung und Ausblick,” presented at the Jahreskolloquium Kommunikation in der Automation, 2020.","chicago":"Ehrlich, Marco, Stefan Benk, Dimitri Harder, Philip Kleen, Henning Trsek, Sebastian Schriegel, and Jürgen Jasperneite. “Automatische Bewertung Und Überwachung von Safety & Security Eigenschaften – Strukturierung Und Ausblick,” 2020.","van":"Ehrlich M, Benk S, Harder D, Kleen P, Trsek H, Schriegel S, et al. Automatische Bewertung und Überwachung von Safety & Security Eigenschaften – Strukturierung und Ausblick. In 2020.","ama":"Ehrlich M, Benk S, Harder D, et al. Automatische Bewertung und Überwachung von Safety & Security Eigenschaften – Strukturierung und Ausblick. In: ; 2020.","ufg":"Ehrlich, Marco et. al. (2020): Automatische Bewertung und Überwachung von Safety & Security Eigenschaften – Strukturierung und Ausblick, in: .","mla":"Ehrlich, Marco, et al. Automatische Bewertung Und Überwachung von Safety & Security Eigenschaften – Strukturierung Und Ausblick. 2020.","havard":"M. Ehrlich, S. Benk, D. Harder, P. Kleen, H. Trsek, S. Schriegel, J. Jasperneite, Automatische Bewertung und Überwachung von Safety & Security Eigenschaften – Strukturierung und Ausblick, in: 2020.","bjps":"Ehrlich M et al. (2020) Automatische Bewertung Und Überwachung von Safety & Security Eigenschaften – Strukturierung Und Ausblick.","short":"M. Ehrlich, S. Benk, D. Harder, P. Kleen, H. Trsek, S. Schriegel, J. Jasperneite, in: 2020.","chicago-de":"Ehrlich, Marco, Stefan Benk, Dimitri Harder, Philip Kleen, Henning Trsek, Sebastian Schriegel und Jürgen Jasperneite. 2020. Automatische Bewertung und Überwachung von Safety & Security Eigenschaften – Strukturierung und Ausblick. In: .","din1505-2-1":"Ehrlich, Marco ; Benk, Stefan ; Harder, Dimitri ; Kleen, Philip ; Trsek, Henning ; Schriegel, Sebastian ; Jasperneite, Jürgen: Automatische Bewertung und Überwachung von Safety & Security Eigenschaften – Strukturierung und Ausblick. In: , 2020"},"title":"Automatische Bewertung und Überwachung von Safety & Security Eigenschaften – Strukturierung und Ausblick"},{"_id":"4880","language":[{"iso":"eng"}],"date_updated":"2023-03-15T13:49:56Z","user_id":"45673","type":"conference","date_created":"2021-02-02T13:58:53Z","status":"public","conference":{"name":"Forum Mittelstand 4.0","location":"Paderborn"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"first_name":"Jürgen","id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen"}],"year":2020,"citation":{"van":"Jasperneite J. Digital in NRW -Neue Technologien, Anwendungen und Empfehlungen für den Mittelstand. In 2020.","mla":"Jasperneite, Jürgen. Digital in NRW -Neue Technologien, Anwendungen Und Empfehlungen Für Den Mittelstand. 2020.","havard":"J. Jasperneite, Digital in NRW -Neue Technologien, Anwendungen und Empfehlungen für den Mittelstand, in: 2020.","bjps":"Jasperneite J (2020) Digital in NRW -Neue Technologien, Anwendungen Und Empfehlungen Für Den Mittelstand.","ufg":"Jasperneite, Jürgen (2020): Digital in NRW -Neue Technologien, Anwendungen und Empfehlungen für den Mittelstand, in: .","apa":"Jasperneite, J. (2020). Digital in NRW -Neue Technologien, Anwendungen und Empfehlungen für den Mittelstand. Presented at the Forum Mittelstand 4.0, Paderborn.","chicago":"Jasperneite, Jürgen. “Digital in NRW -Neue Technologien, Anwendungen Und Empfehlungen Für Den Mittelstand,” 2020.","short":"J. Jasperneite, in: 2020.","chicago-de":"Jasperneite, Jürgen. 2020. Digital in NRW -Neue Technologien, Anwendungen und Empfehlungen für den Mittelstand. In: .","din1505-2-1":"Jasperneite, Jürgen: Digital in NRW -Neue Technologien, Anwendungen und Empfehlungen für den Mittelstand. In: , 2020","ama":"Jasperneite J. Digital in NRW -Neue Technologien, Anwendungen und Empfehlungen für den Mittelstand. In: ; 2020.","ieee":"J. Jasperneite, “Digital in NRW -Neue Technologien, Anwendungen und Empfehlungen für den Mittelstand,” presented at the Forum Mittelstand 4.0, Paderborn, 2020."},"title":"Digital in NRW -Neue Technologien, Anwendungen und Empfehlungen für den Mittelstand"},{"ipn":"EP000002741934B1","alternative_title":["Patenterteilung"],"ipc":"B60L7/14","_id":"4905","type":"patent","date_created":"2021-02-08T13:05:41Z","user_id":"64800","related_material":{"link":[{"relation":"confirmation","url":"https://patentimages.storage.googleapis.com/fc/6f/f0/10205b79a33c41/DE112012003284A5.pdf"}]},"date_updated":"2023-03-15T13:49:56Z","year":2020,"author":[{"id":"1693","first_name":"Holger","full_name":"Borcherding, Holger","last_name":"Borcherding"},{"last_name":"Austermann","first_name":"Johann","id":"42114","full_name":"Austermann, Johann"}],"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"status":"public","publication_date":"2020-01-01","title":"Verfahren und Schaltung für den mehrphasigen Betrieb eines Elektomotos","citation":{"ama":"Borcherding H, Austermann J. Verfahren und Schaltung für den mehrphasigen Betrieb eines Elektomotos. 2020.","ieee":"H. Borcherding and J. Austermann, “Verfahren und Schaltung für den mehrphasigen Betrieb eines Elektomotos.” 2020.","chicago-de":"Borcherding, Holger und Johann Austermann. 2020. Verfahren und Schaltung für den mehrphasigen Betrieb eines Elektomotos.","din1505-2-1":"Borcherding, Holger ; Austermann, Johann: Verfahren und Schaltung für den mehrphasigen Betrieb eines Elektomotos (2020)","short":"H. Borcherding, J. Austermann, (2020).","havard":"H. Borcherding, J. Austermann, Verfahren und Schaltung für den mehrphasigen Betrieb eines Elektomotos, (2020).","mla":"Borcherding, Holger, and Johann Austermann. Verfahren Und Schaltung Für Den Mehrphasigen Betrieb Eines Elektomotos. 2020.","bjps":"Borcherding H and Austermann J (2020) Verfahren Und Schaltung Für Den Mehrphasigen Betrieb Eines Elektomotos.","ufg":"Borcherding, Holger/Austermann, Johann (2020): Verfahren und Schaltung für den mehrphasigen Betrieb eines Elektomotos.","van":"Borcherding H, Austermann J. Verfahren und Schaltung für den mehrphasigen Betrieb eines Elektomotos. 2020.","chicago":"Borcherding, Holger, and Johann Austermann. “Verfahren Und Schaltung Für Den Mehrphasigen Betrieb Eines Elektomotos,” 2020.","apa":"Borcherding, H., & Austermann, J. (2020). Verfahren und Schaltung für den mehrphasigen Betrieb eines Elektomotos."}},{"publisher":"VDE Verlag","status":"public","year":2020,"main_file_link":[{"open_access":"1","url":"https://ieeexplore.ieee.org/document/9178203"}],"author":[{"first_name":"Jan-Niklas","full_name":"Koch, Jan-Niklas","last_name":"Koch","id":"58889"},{"first_name":"Tim","full_name":"Stuckmann, Tim","last_name":"Stuckmann","id":"64800"},{"id":"1693","last_name":"Borcherding","first_name":"Holger","full_name":"Borcherding, Holger"}],"conference":{"end_date":"2020-07-08","start_date":"2020-07-07","name":"PCIM Europe 2020","location":"Nürnberg "},"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"citation":{"short":"J.-N. Koch, T. Stuckmann, H. Borcherding, Cascade Control of a Two-Stage Isolated DC/DC Converter with Wide Input Voltage Range for Optimal Efficiency, VDE Verlag, Berlin, 2020.","din1505-2-1":"Koch, Jan-Niklas ; Stuckmann, Tim ; Borcherding, Holger: Cascade control of a two-stage isolated DC/DC converter with wide input voltage range for optimal efficiency. Berlin : VDE Verlag, 2020","chicago-de":"Koch, Jan-Niklas, Tim Stuckmann und Holger Borcherding. 2020. Cascade control of a two-stage isolated DC/DC converter with wide input voltage range for optimal efficiency. PCIM Europe 2020. Berlin: VDE Verlag.","van":"Koch J-N, Stuckmann T, Borcherding H. Cascade control of a two-stage isolated DC/DC converter with wide input voltage range for optimal efficiency. PCIM Europe 2020. Berlin: VDE Verlag; 2020.","mla":"Koch, Jan-Niklas, et al. “Cascade Control of a Two-Stage Isolated DC/DC Converter with Wide Input Voltage Range for Optimal Efficiency.” PCIM Europe 2020, VDE Verlag, 2020.","havard":"J.-N. Koch, T. Stuckmann, H. Borcherding, Cascade control of a two-stage isolated DC/DC converter with wide input voltage range for optimal efficiency, VDE Verlag, Berlin, 2020.","bjps":"Koch J-N, Stuckmann T and Borcherding H (2020) Cascade Control of a Two-Stage Isolated DC/DC Converter with Wide Input Voltage Range for Optimal Efficiency. Berlin: VDE Verlag.","ufg":"Koch, Jan-Niklas et. al. (2020): Cascade control of a two-stage isolated DC/DC converter with wide input voltage range for optimal efficiency, Berlin.","apa":"Koch, J.-N., Stuckmann, T., & Borcherding, H. (2020). Cascade control of a two-stage isolated DC/DC converter with wide input voltage range for optimal efficiency. PCIM Europe 2020. Berlin: VDE Verlag.","chicago":"Koch, Jan-Niklas, Tim Stuckmann, and Holger Borcherding. Cascade Control of a Two-Stage Isolated DC/DC Converter with Wide Input Voltage Range for Optimal Efficiency. PCIM Europe 2020. Berlin: VDE Verlag, 2020.","ama":"Koch J-N, Stuckmann T, Borcherding H. Cascade Control of a Two-Stage Isolated DC/DC Converter with Wide Input Voltage Range for Optimal Efficiency. Berlin: VDE Verlag; 2020.","ieee":"J.-N. Koch, T. Stuckmann, and H. Borcherding, Cascade control of a two-stage isolated DC/DC converter with wide input voltage range for optimal efficiency. Berlin: VDE Verlag, 2020."},"publication_status":"published","title":"Cascade control of a two-stage isolated DC/DC converter with wide input voltage range for optimal efficiency","_id":"4909","place":"Berlin","language":[{"iso":"eng"}],"oa":"1","user_id":"64800","date_updated":"2023-03-15T13:49:56Z","publication":"PCIM Europe 2020","publication_identifier":{"isbn":["978-3-8007-5245-4"]},"type":"conference_editor_article","date_created":"2020-12-10T14:09:16Z"},{"title":"Design and Analysis of Highly Efficient SiC-based Phase-Shift Full-Bridge Converter for Industrial DC-Grids","citation":{"van":"Stuckmann T, Koch J-N, Borcherding H. Design and Analysis of Highly Efficient SiC-based Phase-Shift Full-Bridge Converter for Industrial DC-Grids. PCIM Europe 2020. Berlin: VDE Verlag; 2020.","havard":"T. Stuckmann, J.-N. Koch, H. Borcherding, Design and Analysis of Highly Efficient SiC-based Phase-Shift Full-Bridge Converter for Industrial DC-Grids, VDE Verlag, Berlin, 2020.","bjps":"Stuckmann T, Koch J-N and Borcherding H (2020) Design and Analysis of Highly Efficient SiC-Based Phase-Shift Full-Bridge Converter for Industrial DC-Grids. Berlin: VDE Verlag.","mla":"Stuckmann, Tim, et al. “Design and Analysis of Highly Efficient SiC-Based Phase-Shift Full-Bridge Converter for Industrial DC-Grids.” PCIM Europe 2020, VDE Verlag, 2020.","ufg":"Stuckmann, Tim et. al. (2020): Design and Analysis of Highly Efficient SiC-based Phase-Shift Full-Bridge Converter for Industrial DC-Grids, Berlin.","apa":"Stuckmann, T., Koch, J.-N., & Borcherding, H. (2020). Design and Analysis of Highly Efficient SiC-based Phase-Shift Full-Bridge Converter for Industrial DC-Grids. PCIM Europe 2020. Berlin: VDE Verlag.","chicago":"Stuckmann, Tim, Jan-Niklas Koch, and Holger Borcherding. Design and Analysis of Highly Efficient SiC-Based Phase-Shift Full-Bridge Converter for Industrial DC-Grids. PCIM Europe 2020. Berlin: VDE Verlag, 2020.","short":"T. Stuckmann, J.-N. Koch, H. Borcherding, Design and Analysis of Highly Efficient SiC-Based Phase-Shift Full-Bridge Converter for Industrial DC-Grids, VDE Verlag, Berlin, 2020.","din1505-2-1":"Stuckmann, Tim ; Koch, Jan-Niklas ; Borcherding, Holger: Design and Analysis of Highly Efficient SiC-based Phase-Shift Full-Bridge Converter for Industrial DC-Grids. Berlin : VDE Verlag, 2020","chicago-de":"Stuckmann, Tim, Jan-Niklas Koch und Holger Borcherding. 2020. Design and Analysis of Highly Efficient SiC-based Phase-Shift Full-Bridge Converter for Industrial DC-Grids. PCIM Europe 2020. Berlin: VDE Verlag.","ama":"Stuckmann T, Koch J-N, Borcherding H. Design and Analysis of Highly Efficient SiC-Based Phase-Shift Full-Bridge Converter for Industrial DC-Grids. Berlin: VDE Verlag; 2020.","ieee":"T. Stuckmann, J.-N. Koch, and H. Borcherding, Design and Analysis of Highly Efficient SiC-based Phase-Shift Full-Bridge Converter for Industrial DC-Grids. Berlin: VDE Verlag, 2020."},"publication_status":"published","year":2020,"main_file_link":[{"open_access":"1","url":"https://ieeexplore.ieee.org/document/9178206/metrics#metrics"}],"author":[{"first_name":"Tim","last_name":"Stuckmann","full_name":"Stuckmann, Tim","id":"64800"},{"first_name":"Jan-Niklas","id":"58889","full_name":"Koch, Jan-Niklas","last_name":"Koch"},{"id":"1693","first_name":"Holger","last_name":"Borcherding","full_name":"Borcherding, Holger"}],"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"conference":{"start_date":"2020-07-07","end_date":"2020-07-08","name":"PCIM Europe 2020","location":"Nürnberg"},"status":"public","publisher":"VDE Verlag","quality_controlled":"1","publication":"PCIM Europe 2020","publication_identifier":{"isbn":["978-3-8007-5245-4"]},"date_created":"2020-12-10T14:09:16Z","type":"conference_editor_article","user_id":"64800","date_updated":"2023-03-15T13:49:56Z","oa":"1","place":"Berlin","language":[{"iso":"eng"}],"_id":"4910"},{"date_updated":"2023-03-15T13:49:56Z","user_id":"64800","corporate_editor":["Mesago Messe Frankfurt GmbH, Stuttgart "],"date_created":"2020-12-10T14:09:16Z","type":"conference_editor_article","publication":"PCIM Europe digital days 2020 : International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management Proceedings","publication_identifier":{"isbn":["978-3-8007-5245-4"]},"language":[{"iso":"eng"}],"place":"Berlin","_id":"4911","publication_status":"published","citation":{"apa":"Puls, S., & Borcherding, H. (2020). Approach of an Active Device Protection for Drive Inverters against Device Faults in an Open Indstrial DC Grid. (Mesago Messe Frankfurt GmbH, Stuttgart , Ed.), PCIM Europe digital days 2020 : International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management Proceedings. Berlin: VDE Verlag.","chicago":"Puls, Simon, and Holger Borcherding. Approach of an Active Device Protection for Drive Inverters against Device Faults in an Open Indstrial DC Grid. Edited by Mesago Messe Frankfurt GmbH, Stuttgart . PCIM Europe Digital Days 2020 : International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management Proceedings. Berlin: VDE Verlag, 2020.","van":"Puls S, Borcherding H. Approach of an Active Device Protection for Drive Inverters against Device Faults in an Open Indstrial DC Grid. Mesago Messe Frankfurt GmbH, Stuttgart , editor. PCIM Europe digital days 2020 : International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management Proceedings. Berlin: VDE Verlag; 2020.","mla":"Puls, Simon, and Holger Borcherding. “Approach of an Active Device Protection for Drive Inverters against Device Faults in an Open Indstrial DC Grid.” PCIM Europe Digital Days 2020 : International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management Proceedings, edited by Mesago Messe Frankfurt GmbH, Stuttgart , VDE Verlag, 2020.","bjps":"Puls S and Borcherding H (2020) Approach of an Active Device Protection for Drive Inverters against Device Faults in an Open Indstrial DC Grid, Mesago Messe Frankfurt GmbH, Stuttgart (ed.). Berlin: VDE Verlag.","havard":"S. Puls, H. Borcherding, Approach of an Active Device Protection for Drive Inverters against Device Faults in an Open Indstrial DC Grid, VDE Verlag, Berlin, 2020.","ufg":"Puls, Simon/Borcherding, Holger (2020): Approach of an Active Device Protection for Drive Inverters against Device Faults in an Open Indstrial DC Grid, Berlin.","short":"S. Puls, H. Borcherding, Approach of an Active Device Protection for Drive Inverters against Device Faults in an Open Indstrial DC Grid, VDE Verlag, Berlin, 2020.","din1505-2-1":"Puls, Simon ; Borcherding, Holger ; Mesago Messe Frankfurt GmbH, Stuttgart (Hrsg.): Approach of an Active Device Protection for Drive Inverters against Device Faults in an Open Indstrial DC Grid. Berlin : VDE Verlag, 2020","chicago-de":"Puls, Simon und Holger Borcherding. 2020. Approach of an Active Device Protection for Drive Inverters against Device Faults in an Open Indstrial DC Grid. Hg. von Mesago Messe Frankfurt GmbH, Stuttgart . PCIM Europe digital days 2020 : International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management Proceedings. Berlin: VDE Verlag.","ieee":"S. Puls and H. Borcherding, Approach of an Active Device Protection for Drive Inverters against Device Faults in an Open Indstrial DC Grid. Berlin: VDE Verlag, 2020.","ama":"Puls S, Borcherding H. Approach of an Active Device Protection for Drive Inverters against Device Faults in an Open Indstrial DC Grid. (Mesago Messe Frankfurt GmbH, Stuttgart , ed.). Berlin: VDE Verlag; 2020."},"title":"Approach of an Active Device Protection for Drive Inverters against Device Faults in an Open Indstrial DC Grid","status":"public","publisher":"VDE Verlag","department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"conference":{"end_date":"2020-07-08","start_date":"2020-07-07","name":"PCIM Europe digital days 2020 International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management Proceedings"},"main_file_link":[{"url":"https://ieeexplore.ieee.org/document/9273422"}],"year":2020,"author":[{"first_name":"Simon","last_name":"Puls","full_name":"Puls, Simon"},{"last_name":"Borcherding","first_name":"Holger","full_name":"Borcherding, Holger","id":"1693"}]},{"corporate_editor":["Mesago Messe Frankfurt GmbH, Stuttgart "],"date_updated":"2023-03-15T13:49:56Z","user_id":"64800","date_created":"2020-12-10T14:09:16Z","type":"conference_editor_article","publication_identifier":{"isbn":["978-3-8007-5245-4"]},"publication":"PCIM Europe digital days 2020 : International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management Proceedings","_id":"4912","language":[{"iso":"eng"}],"place":"Berlin","publication_status":"published","citation":{"apa":"Ting Helmholdt-Zhu, T., Knebusch, B., & Borcherding, H. (2020). High-Frequency Models for the Prediction of Transient Effects in Motor Windings Under Fast Rising Impulse Voltages. (Mesago Messe Frankfurt GmbH, Stuttgart , Ed.), PCIM Europe digital days 2020 : International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management Proceedings. Berlin: VDE Verlag.","chicago":"Ting Helmholdt-Zhu, T., B. Knebusch, and Holger Borcherding. High-Frequency Models for the Prediction of Transient Effects in Motor Windings Under Fast Rising Impulse Voltages. Edited by Mesago Messe Frankfurt GmbH, Stuttgart . PCIM Europe Digital Days 2020 : International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management Proceedings. Berlin: VDE Verlag, 2020.","van":"Ting Helmholdt-Zhu T, Knebusch B, Borcherding H. High-Frequency Models for the Prediction of Transient Effects in Motor Windings Under Fast Rising Impulse Voltages. Mesago Messe Frankfurt GmbH, Stuttgart , editor. PCIM Europe digital days 2020 : International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management Proceedings. Berlin: VDE Verlag; 2020.","havard":"T. Ting Helmholdt-Zhu, B. Knebusch, H. Borcherding, High-Frequency Models for the Prediction of Transient Effects in Motor Windings Under Fast Rising Impulse Voltages, VDE Verlag, Berlin, 2020.","mla":"Ting Helmholdt-Zhu, T., et al. “High-Frequency Models for the Prediction of Transient Effects in Motor Windings Under Fast Rising Impulse Voltages.” PCIM Europe Digital Days 2020 : International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management Proceedings, edited by Mesago Messe Frankfurt GmbH, Stuttgart , VDE Verlag, 2020.","bjps":"Ting Helmholdt-Zhu T, Knebusch B and Borcherding H (2020) High-Frequency Models for the Prediction of Transient Effects in Motor Windings Under Fast Rising Impulse Voltages, Mesago Messe Frankfurt GmbH, Stuttgart (ed.). Berlin: VDE Verlag.","ufg":"Ting Helmholdt-Zhu, T. et. al. (2020): High-Frequency Models for the Prediction of Transient Effects in Motor Windings Under Fast Rising Impulse Voltages, Berlin.","short":"T. Ting Helmholdt-Zhu, B. Knebusch, H. Borcherding, High-Frequency Models for the Prediction of Transient Effects in Motor Windings Under Fast Rising Impulse Voltages, VDE Verlag, Berlin, 2020.","din1505-2-1":"Ting Helmholdt-Zhu, T. ; Knebusch, B. ; Borcherding, Holger ; Mesago Messe Frankfurt GmbH, Stuttgart (Hrsg.): High-Frequency Models for the Prediction of Transient Effects in Motor Windings Under Fast Rising Impulse Voltages. Berlin : VDE Verlag, 2020","chicago-de":"Ting Helmholdt-Zhu, T., B. Knebusch und Holger Borcherding. 2020. High-Frequency Models for the Prediction of Transient Effects in Motor Windings Under Fast Rising Impulse Voltages. Hg. von Mesago Messe Frankfurt GmbH, Stuttgart . PCIM Europe digital days 2020 : International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management Proceedings. Berlin: VDE Verlag.","ieee":"T. Ting Helmholdt-Zhu, B. Knebusch, and H. Borcherding, High-Frequency Models for the Prediction of Transient Effects in Motor Windings Under Fast Rising Impulse Voltages. Berlin: VDE Verlag, 2020.","ama":"Ting Helmholdt-Zhu T, Knebusch B, Borcherding H. High-Frequency Models for the Prediction of Transient Effects in Motor Windings Under Fast Rising Impulse Voltages. (Mesago Messe Frankfurt GmbH, Stuttgart , ed.). Berlin: VDE Verlag; 2020."},"title":"High-Frequency Models for the Prediction of Transient Effects in Motor Windings Under Fast Rising Impulse Voltages","publisher":"VDE Verlag","status":"public","conference":{"end_date":"2020-07-08","start_date":"2020-07-07","name":"PCIM Europe digital days 2020 International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management Proceedings"},"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"year":2020,"author":[{"last_name":"Ting Helmholdt-Zhu","first_name":"T.","full_name":"Ting Helmholdt-Zhu, T."},{"first_name":"B.","full_name":"Knebusch, B.","last_name":"Knebusch"},{"first_name":"Holger","last_name":"Borcherding","id":"1693","full_name":"Borcherding, Holger"}],"main_file_link":[{"url":"https://ieeexplore.ieee.org/document/9178067"}]},{"year":2020,"main_file_link":[{"url":"https://www.vde-verlag.de/proceedings-en/565245262.html"}],"author":[{"first_name":"Simon","full_name":"Puls, Simon","last_name":"Puls"},{"full_name":"Hegerfeld, Jan","first_name":"Jan","last_name":"Hegerfeld"},{"id":"42114","full_name":"Austermann, Johann","last_name":"Austermann","first_name":"Johann"},{"last_name":"Borcherding","id":"15090","first_name":"Rainer","full_name":"Borcherding, Rainer"}],"conference":{"name":"PCIM Europe digital days 2020 International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management Proceedings","location":"Online ; fand aufgrund von Covid-19 nicht vor Ort statt ","start_date":"2020-07-07","end_date":"2020-07-08"},"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"status":"public","publisher":"VDE Verlag","title":"Transient Overvoltage Protection Solutions for Drive Inverters Operating on an Open Industrial DC Grid","citation":{"ieee":"S. Puls, J. Hegerfeld, J. Austermann, and R. Borcherding, Transient Overvoltage Protection Solutions for Drive Inverters Operating on an Open Industrial DC Grid. Berlin: VDE Verlag, 2020.","apa":"Puls, S., Hegerfeld, J., Austermann, J., & Borcherding, R. (2020). Transient Overvoltage Protection Solutions for Drive Inverters Operating on an Open Industrial DC Grid. (Mesago Messe Frankfurt GmbH, Stuttgart , Ed.), PCIM Europe digital days 2020 : International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management Proceedings. Berlin: VDE Verlag.","chicago":"Puls, Simon, Jan Hegerfeld, Johann Austermann, and Rainer Borcherding. Transient Overvoltage Protection Solutions for Drive Inverters Operating on an Open Industrial DC Grid. Edited by Mesago Messe Frankfurt GmbH, Stuttgart . PCIM Europe Digital Days 2020 : International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management Proceedings. Berlin: VDE Verlag, 2020.","ama":"Puls S, Hegerfeld J, Austermann J, Borcherding R. Transient Overvoltage Protection Solutions for Drive Inverters Operating on an Open Industrial DC Grid. (Mesago Messe Frankfurt GmbH, Stuttgart , ed.). Berlin: VDE Verlag; 2020.","van":"Puls S, Hegerfeld J, Austermann J, Borcherding R. Transient Overvoltage Protection Solutions for Drive Inverters Operating on an Open Industrial DC Grid. Mesago Messe Frankfurt GmbH, Stuttgart , editor. PCIM Europe digital days 2020 : International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management Proceedings. Berlin: VDE Verlag; 2020.","havard":"S. Puls, J. Hegerfeld, J. Austermann, R. Borcherding, Transient Overvoltage Protection Solutions for Drive Inverters Operating on an Open Industrial DC Grid, VDE Verlag, Berlin, 2020.","mla":"Puls, Simon, et al. “Transient Overvoltage Protection Solutions for Drive Inverters Operating on an Open Industrial DC Grid.” PCIM Europe Digital Days 2020 : International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management Proceedings, edited by Mesago Messe Frankfurt GmbH, Stuttgart , VDE Verlag, 2020.","bjps":"Puls S et al. (2020) Transient Overvoltage Protection Solutions for Drive Inverters Operating on an Open Industrial DC Grid, Mesago Messe Frankfurt GmbH, Stuttgart (ed.). Berlin: VDE Verlag.","ufg":"Puls, Simon et. al. (2020): Transient Overvoltage Protection Solutions for Drive Inverters Operating on an Open Industrial DC Grid, Berlin.","short":"S. Puls, J. Hegerfeld, J. Austermann, R. Borcherding, Transient Overvoltage Protection Solutions for Drive Inverters Operating on an Open Industrial DC Grid, VDE Verlag, Berlin, 2020.","din1505-2-1":"Puls, Simon ; Hegerfeld, Jan ; Austermann, Johann ; Borcherding, Rainer ; Mesago Messe Frankfurt GmbH, Stuttgart (Hrsg.): Transient Overvoltage Protection Solutions for Drive Inverters Operating on an Open Industrial DC Grid. Berlin : VDE Verlag, 2020","chicago-de":"Puls, Simon, Jan Hegerfeld, Johann Austermann und Rainer Borcherding. 2020. Transient Overvoltage Protection Solutions for Drive Inverters Operating on an Open Industrial DC Grid. Hg. von Mesago Messe Frankfurt GmbH, Stuttgart . PCIM Europe digital days 2020 : International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management Proceedings. Berlin: VDE Verlag."},"publication_status":"published","place":"Berlin","language":[{"iso":"eng"}],"_id":"4913","publication_identifier":{"isbn":["978-3-8007-5245-4"]},"publication":"PCIM Europe digital days 2020 : International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management Proceedings","date_created":"2020-12-10T14:09:16Z","type":"conference_editor_article","user_id":"15514","date_updated":"2023-03-15T13:49:56Z","corporate_editor":["Mesago Messe Frankfurt GmbH, Stuttgart "]},{"publication_status":"published","publisher":"IEEE","quality_controlled":"1","abstract":[{"lang":"eng","text":"An open industrial DC grid has a lot of advantages. Also new challenges arise by coupling several DC link capacitors of inverters. This paper presents an approach and measurements of an active device protection to withstand possible faults that can occur in the DC grid. In particular, robustness in the event of faults plays a key role."}],"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"conference":{"location":"Lyon, France","name":"22nd European Conference on Power Electronics and Applications (EPE'20 ECCE Europe VIRTUAL)","end_date":"2020-09-11","start_date":"2020-09-07"},"user_id":"83781","type":"conference_editor_article","_id":"4918","doi":"10.23919/EPE20ECCEEurope43536.2020.9215949","citation":{"ama":"Puls S, Obernolte U, Borcherding H, Ehlich M. Approach of an Active Device Protection for Drive Inverters against Short Circuit Faults in an Open Industrial DC Grid. IEEE; 2020. doi:10.23919/EPE20ECCEEurope43536.2020.9215949","ieee":"S. Puls, U. Obernolte, H. Borcherding, and M. Ehlich, Approach of an Active Device Protection for Drive Inverters against Short Circuit Faults in an Open Industrial DC Grid. IEEE, 2020. doi: 10.23919/EPE20ECCEEurope43536.2020.9215949.","short":"S. Puls, U. Obernolte, H. Borcherding, M. Ehlich, Approach of an Active Device Protection for Drive Inverters against Short Circuit Faults in an Open Industrial DC Grid, IEEE, 2020.","din1505-2-1":"Puls, Simon ; Obernolte, Urs ; Borcherding, Holger ; Ehlich, Martin: Approach of an Active Device Protection for Drive Inverters against Short Circuit Faults in an Open Industrial DC Grid : IEEE, 2020","chicago-de":"Puls, Simon, Urs Obernolte, Holger Borcherding und Martin Ehlich. 2020. Approach of an Active Device Protection for Drive Inverters against Short Circuit Faults in an Open Industrial DC Grid. 2020 22nd European Conference on Power Electronics and Applications (EPE’20 ECCE Europe VIRTUAL). IEEE. doi:10.23919/EPE20ECCEEurope43536.2020.9215949, .","van":"Puls S, Obernolte U, Borcherding H, Ehlich M. Approach of an Active Device Protection for Drive Inverters against Short Circuit Faults in an Open Industrial DC Grid. 2020 22nd European Conference on Power Electronics and Applications (EPE’20 ECCE Europe VIRTUAL). IEEE; 2020.","bjps":"Puls S et al. (2020) Approach of an Active Device Protection for Drive Inverters against Short Circuit Faults in an Open Industrial DC Grid. IEEE.","mla":"Puls, Simon, et al. “Approach of an Active Device Protection for Drive Inverters against Short Circuit Faults in an Open Industrial DC Grid.” 2020 22nd European Conference on Power Electronics and Applications (EPE’20 ECCE Europe VIRTUAL), IEEE, 2020, https://doi.org/10.23919/EPE20ECCEEurope43536.2020.9215949.","havard":"S. Puls, U. Obernolte, H. Borcherding, M. Ehlich, Approach of an Active Device Protection for Drive Inverters against Short Circuit Faults in an Open Industrial DC Grid, IEEE, 2020.","ufg":"Puls, Simon u. a.: Approach of an Active Device Protection for Drive Inverters against Short Circuit Faults in an Open Industrial DC Grid, o. O. 2020.","apa":"Puls, S., Obernolte, U., Borcherding, H., & Ehlich, M. (2020). Approach of an Active Device Protection for Drive Inverters against Short Circuit Faults in an Open Industrial DC Grid. In 2020 22nd European Conference on Power Electronics and Applications (EPE’20 ECCE Europe VIRTUAL). 22nd European Conference on Power Electronics and Applications (EPE’20 ECCE Europe VIRTUAL), Lyon, France. IEEE. https://doi.org/10.23919/EPE20ECCEEurope43536.2020.9215949","chicago":"Puls, Simon, Urs Obernolte, Holger Borcherding, and Martin Ehlich. Approach of an Active Device Protection for Drive Inverters against Short Circuit Faults in an Open Industrial DC Grid. 2020 22nd European Conference on Power Electronics and Applications (EPE’20 ECCE Europe VIRTUAL). IEEE, 2020. https://doi.org/10.23919/EPE20ECCEEurope43536.2020.9215949."},"title":"Approach of an Active Device Protection for Drive Inverters against Short Circuit Faults in an Open Industrial DC Grid","status":"public","main_file_link":[{"url":"https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=7695572"}],"author":[{"id":"85051","first_name":"Simon","last_name":"Puls","full_name":"Puls, Simon"},{"full_name":"Obernolte, Urs","first_name":"Urs","last_name":"Obernolte"},{"full_name":"Borcherding, Holger","first_name":"Holger","last_name":"Borcherding","id":"1693"},{"last_name":"Ehlich","full_name":"Ehlich, Martin","first_name":"Martin"}],"year":"2020","date_updated":"2025-06-26T13:35:13Z","publication_identifier":{"issn":["2325-0313"],"eisbn":["978-9-0758-1536-8"],"isbn":["978-1-7281-9807-1"]},"publication":"2020 22nd European Conference on Power Electronics and Applications (EPE'20 ECCE Europe VIRTUAL)","date_created":"2020-12-14T13:55:20Z","keyword":["DC grid","fault handling strategy","DC-power supply","active protection","drive inverters"],"language":[{"iso":"eng"}]},{"date_created":"2021-03-02T08:20:33Z","type":"conference","user_id":"74004","date_updated":"2023-03-15T13:49:57Z","_id":"5102","doi":"10.25644/n4qq-q019","language":[{"iso":"eng"}],"title":"100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? : Selected Papers from 16th Docomomo Germany 3rd RMB Conference 1st March 2019, Berlin","citation":{"ufg":"Pottgiesser, Uta et. al. (2020): 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? : Selected Papers from 16th Docomomo Germany 3rd RMB Conference 1st March 2019, Berlin, in: .","havard":"U. Pottgiesser, F. Jaschke, M. Melenhorst, 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? : Selected Papers from 16th Docomomo Germany 3rd RMB Conference 1st March 2019, Berlin, in: DOCOMOMO, 2020.","mla":"Pottgiesser, Uta, et al. 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? : Selected Papers from 16th Docomomo Germany 3rd RMB Conference 1st March 2019, Berlin. DOCOMOMO, 2020, doi:10.25644/n4qq-q019.","bjps":"Pottgiesser U, Jaschke F and Melenhorst M (2020) 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? : Selected Papers from 16th Docomomo Germany 3rd RMB Conference 1st March 2019, Berlin. DOCOMOMO.","van":"Pottgiesser U, Jaschke F, Melenhorst M. 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? : Selected Papers from 16th Docomomo Germany 3rd RMB Conference 1st March 2019, Berlin. In DOCOMOMO; 2020.","chicago":"Pottgiesser, Uta, Franz Jaschke, and Michel Melenhorst. “100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? : Selected Papers from 16th Docomomo Germany 3rd RMB Conference 1st March 2019, Berlin.” DOCOMOMO, 2020. https://doi.org/10.25644/n4qq-q019.","apa":"Pottgiesser, U., Jaschke, F., & Melenhorst, M. (2020). 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? : Selected Papers from 16th Docomomo Germany 3rd RMB Conference 1st March 2019, Berlin. Presented at the 16th Docomomo Germany - 3rd RMB Conference, Berlin: DOCOMOMO. https://doi.org/10.25644/n4qq-q019","chicago-de":"Pottgiesser, Uta, Franz Jaschke und Michel Melenhorst. 2020. 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? : Selected Papers from 16th Docomomo Germany 3rd RMB Conference 1st March 2019, Berlin. In: . DOCOMOMO. doi:10.25644/n4qq-q019, .","din1505-2-1":"Pottgiesser, Uta ; Jaschke, Franz ; Melenhorst, Michel: 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? : Selected Papers from 16th Docomomo Germany 3rd RMB Conference 1st March 2019, Berlin. In: : DOCOMOMO, 2020","short":"U. Pottgiesser, F. Jaschke, M. Melenhorst, in: DOCOMOMO, 2020.","ama":"Pottgiesser U, Jaschke F, Melenhorst M. 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? : Selected Papers from 16th Docomomo Germany 3rd RMB Conference 1st March 2019, Berlin. In: DOCOMOMO; 2020. doi:10.25644/n4qq-q019","ieee":"U. Pottgiesser, F. Jaschke, and M. Melenhorst, “100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? : Selected Papers from 16th Docomomo Germany 3rd RMB Conference 1st March 2019, Berlin,” presented at the 16th Docomomo Germany - 3rd RMB Conference, Berlin, 2020."},"year":2020,"author":[{"orcid":"0000-0002-8594-3168","first_name":"Uta","full_name":"Pottgiesser, Uta","last_name":"Pottgiesser","id":"27166"},{"first_name":"Franz","full_name":"Jaschke, Franz","last_name":"Jaschke"},{"last_name":"Melenhorst","full_name":"Melenhorst, Michel","first_name":"Michel","id":"51438"}],"conference":{"start_date":"2019-03-01","end_date":"2019-03-01","name":"16th Docomomo Germany - 3rd RMB Conference","location":"Berlin"},"department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"publisher":"DOCOMOMO","status":"public"},{"department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"conference":{"start_date":"2021-08-29","end_date":"2021-09-02","name":"16 IDC International Docomomo Conference","location":" Tokyo, Japan"},"year":2020,"author":[{"orcid":"0000-0002-6962-5223","full_name":"Dragutinovic, Anica","first_name":"Anica","last_name":"Dragutinovic","id":"68875"},{"orcid":"0000-0002-8594-3168","full_name":"Pottgiesser, Uta","first_name":"Uta","id":"27166","last_name":"Pottgiesser"}],"quality_controlled":"1","status":"public","title":"Mitigating mass housing obsolescence : Reuse of common spaces as a tactic for revitalizing mass housing and increasing liveability","publication_status":"accepted","citation":{"ama":"Dragutinovic A, Pottgiesser U. Mitigating mass housing obsolescence : Reuse of common spaces as a tactic for revitalizing mass housing and increasing liveability.","ieee":"A. Dragutinovic and U. Pottgiesser, “Mitigating mass housing obsolescence : Reuse of common spaces as a tactic for revitalizing mass housing and increasing liveability,” presented at the 16 IDC International Docomomo Conference, Tokyo, Japan.","ufg":"Dragutinovic, Anica/Pottgiesser, Uta: Mitigating mass housing obsolescence : Reuse of common spaces as a tactic for revitalizing mass housing and increasing liveability, in: .","mla":"Dragutinovic, Anica, and Uta Pottgiesser. Mitigating Mass Housing Obsolescence : Reuse of Common Spaces as a Tactic for Revitalizing Mass Housing and Increasing Liveability.","bjps":"Dragutinovic A and Pottgiesser U (n.d.) Mitigating Mass Housing Obsolescence : Reuse of Common Spaces as a Tactic for Revitalizing Mass Housing and Increasing Liveability.","havard":"A. Dragutinovic, U. Pottgiesser, Mitigating mass housing obsolescence : Reuse of common spaces as a tactic for revitalizing mass housing and increasing liveability, in: n.d.","van":"Dragutinovic A, Pottgiesser U. Mitigating mass housing obsolescence : Reuse of common spaces as a tactic for revitalizing mass housing and increasing liveability. In.","chicago":"Dragutinovic, Anica, and Uta Pottgiesser. “Mitigating Mass Housing Obsolescence : Reuse of Common Spaces as a Tactic for Revitalizing Mass Housing and Increasing Liveability,” n.d.","apa":"Dragutinovic, A., & Pottgiesser, U. (n.d.). Mitigating mass housing obsolescence : Reuse of common spaces as a tactic for revitalizing mass housing and increasing liveability. Presented at the 16 IDC International Docomomo Conference, Tokyo, Japan.","chicago-de":"Dragutinovic, Anica und Uta Pottgiesser. Mitigating mass housing obsolescence : Reuse of common spaces as a tactic for revitalizing mass housing and increasing liveability. In: .","din1505-2-1":"Dragutinovic, Anica ; Pottgiesser, Uta: Mitigating mass housing obsolescence : Reuse of common spaces as a tactic for revitalizing mass housing and increasing liveability. In:","short":"A. Dragutinovic, U. Pottgiesser, in: n.d."},"_id":"5295","language":[{"iso":"eng"}],"type":"conference","date_created":"2021-03-15T09:40:11Z","date_updated":"2023-03-15T13:49:58Z","user_id":"74004"},{"quality_controlled":"1","status":"public","department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"conference":{"start_date":"2020-08-05","end_date":"2020-08-27","name":"Facade Tectonics 2020 World Congress ","location":"Los Angeles, USA"},"year":2020,"main_file_link":[{"url":"https://www.facadetectonics.org/publications/collection/publications"}],"author":[{"last_name":"Pottgiesser","id":"27166","full_name":"Pottgiesser, Uta","first_name":"Uta","orcid":"0000-0002-8594-3168"},{"first_name":"Angel","full_name":"Ayon, Angel","last_name":"Ayon"}],"publication_status":"published","citation":{"chicago-de":"Pottgiesser, Uta und Angel Ayon. 2020. Heritage matters: Building Envelope Improvements. Intervention Strategies for Post-War Modern Facades. In: .","din1505-2-1":"Pottgiesser, Uta ; Ayon, Angel: Heritage matters: Building Envelope Improvements. Intervention Strategies for Post-War Modern Facades. In: , 2020","short":"U. Pottgiesser, A. Ayon, in: 2020.","chicago":"Pottgiesser, Uta, and Angel Ayon. “Heritage Matters: Building Envelope Improvements. Intervention Strategies for Post-War Modern Facades,” 2020.","ieee":"U. Pottgiesser and A. Ayon, “Heritage matters: Building Envelope Improvements. Intervention Strategies for Post-War Modern Facades,” presented at the Facade Tectonics 2020 World Congress , Los Angeles, USA, 2020.","apa":"Pottgiesser, U., & Ayon, A. (2020). Heritage matters: Building Envelope Improvements. Intervention Strategies for Post-War Modern Facades. Presented at the Facade Tectonics 2020 World Congress , Los Angeles, USA.","bjps":"Pottgiesser U and Ayon A (2020) Heritage Matters: Building Envelope Improvements. Intervention Strategies for Post-War Modern Facades.","mla":"Pottgiesser, Uta, and Angel Ayon. Heritage Matters: Building Envelope Improvements. Intervention Strategies for Post-War Modern Facades. 2020.","havard":"U. Pottgiesser, A. Ayon, Heritage matters: Building Envelope Improvements. Intervention Strategies for Post-War Modern Facades, in: 2020.","ufg":"Pottgiesser, Uta/Ayon, Angel (2020): Heritage matters: Building Envelope Improvements. Intervention Strategies for Post-War Modern Facades, in: .","ama":"Pottgiesser U, Ayon A. Heritage matters: Building Envelope Improvements. Intervention Strategies for Post-War Modern Facades. In: ; 2020.","van":"Pottgiesser U, Ayon A. Heritage matters: Building Envelope Improvements. Intervention Strategies for Post-War Modern Facades. In 2020."},"title":"Heritage matters: Building Envelope Improvements. Intervention Strategies for Post-War Modern Facades","_id":"5296","language":[{"iso":"eng"}],"date_updated":"2023-03-15T13:49:58Z","user_id":"45673","date_created":"2021-03-15T09:54:20Z","type":"conference"},{"department":[{"_id":"DEP1303"},{"_id":"DEP1055"}],"year":2020,"main_file_link":[{"url":"https://www.yumpu.com/de/document/read/63573359/urbanlab-magazin-2020-mehr-als-provinz","open_access":"1"}],"abstract":[{"lang":"ger","text":"Seit 2016 erscheint das urbanLab Magazin jährlich als Fachzeitschrift für Stadt- und Regionalplanung mit dem Anspruch Forschung, Lehre und der Praxis in den Planungsdisziplinen des Spannungsfeldes Stadt und Quartier anhand konkreter Themencluster besser zu vernetzen. Wir geben zukunftsweisenden Ideen, Fachbeiträgen, Publikationen und kontroversen Diskussionen eine Plattform und bringen sie unterstützt durch Erkenntnisse aus unserer Forschung auf den Punkt. "}],"issue":"6","status":"public","title":"urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung","publication_status":"published","citation":{"ieee":"O. Hall, J. J. Dorf, M. Cardinali, and Technische Hochschule Ostwestfalen-Lippe , Eds., urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, no. 6. 2020.","apa":"Hall, O., Dorf, J. J., Cardinali, M., & Technische Hochschule Ostwestfalen-Lippe (Eds.). (2020). urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. Mehr als Provinz - Besondere Stadtentwicklung in Klein- und Mittelstädten.","chicago":"Hall, Oliver, Johanna Julia Dorf, Marcel Cardinali, and Technische Hochschule Ostwestfalen-Lippe , eds. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. Mehr als Provinz - Besondere Stadtentwicklung in Klein- und Mittelstädten, 2020.","ama":"Hall O, Dorf JJ, Cardinali M, Technische Hochschule Ostwestfalen-Lippe , eds. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung.; 2020.","van":"Hall O, Dorf JJ, Cardinali M, Technische Hochschule Ostwestfalen-Lippe , editors. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. Mehr als Provinz - Besondere Stadtentwicklung in Klein- und Mittelstädten. 2020.","mla":"Hall, Oliver, et al., editors. “urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung.” Mehr als Provinz - Besondere Stadtentwicklung in Klein- und Mittelstädten, no. 6, 2020.","havard":"O. Hall, J.J. Dorf, M. Cardinali, Technische Hochschule Ostwestfalen-Lippe , eds., urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, 2020.","bjps":"Hall O et al. (eds) (2020) urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. .","ufg":"Hall, Oliver et. al. (Hgg.) (2020): urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung.","short":"O. Hall, J.J. Dorf, M. Cardinali, Technische Hochschule Ostwestfalen-Lippe , eds., urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, 2020.","chicago-de":"Hall, Oliver, Johanna Julia Dorf, Marcel Cardinali und Technische Hochschule Ostwestfalen-Lippe , Hrsg. 2020. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. Mehr als Provinz - Besondere Stadtentwicklung in Klein- und Mittelstädten.","din1505-2-1":"Hall, O. ; Dorf, J. J. ; Cardinali, M. ; Technische Hochschule Ostwestfalen-Lippe (Hrsg.): urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, 2020"},"oa":"1","language":[{"iso":"ger"}],"keyword":["Forschung und Hochschulentwicklung","Clusterbildung in der Kultur- und Kreativwirtschaft","Kulturangebote mit überregionaler Anziehungskraft"],"_id":"5312","type":"journal_editor","date_created":"2021-03-23T09:30:01Z","publication":"Mehr als Provinz - Besondere Stadtentwicklung in Klein- und Mittelstädten","publication_identifier":{"issn":["2566-8900"],"eissn":["2566-8919"]},"date_updated":"2023-03-15T13:49:58Z","user_id":"45673","editor":[{"id":"27136","first_name":"Oliver","last_name":"Hall","full_name":"Hall, Oliver"},{"orcid":"https://orcid.org/0000-0002-1185-1113","first_name":"Johanna Julia","last_name":"Dorf","full_name":"Dorf, Johanna Julia","id":"65039"},{"last_name":"Cardinali","full_name":"Cardinali, Marcel","id":"58462","first_name":"Marcel","orcid":"0000-0002-8841-9345"}],"corporate_editor":["Technische Hochschule Ostwestfalen-Lippe ","Forschungsschwerpunkt urbanLab"]},{"language":[{"iso":"eng"}],"date_created":"2021-04-08T05:51:47Z","publication_identifier":{"issn":["0723-1520"],"eissn":["1613-2041"]},"publication":"BrewingScience","file_date_updated":"2024-07-19T12:41:51Z","date_updated":"2024-07-19T12:41:52Z","year":"2020","author":[{"full_name":"Katsch, Linda","first_name":"Linda","last_name":"Katsch","id":"71614","orcid":"0000-0001-6628-3929 "},{"full_name":"Methner, F.-J.","first_name":"F.-J.","last_name":"Methner"},{"orcid":"0000-0001-6401-8873","first_name":"Jan","full_name":"Schneider, Jan","last_name":"Schneider","id":"13209"}],"main_file_link":[{"url":"https://www.brewingscience.de/index.php?tpl=table_of_contents&year=2020&edition=0007%2F0008"}],"page":"85 - 94","status":"public","title":"Kinetic studies of L-ascorbic acid degradation in fruit juices for the improvement of pasteurization plants","citation":{"short":"L. Katsch, F.-J. Methner, J. Schneider, BrewingScience 73 (2020) 85–94.","chicago-de":"Katsch, Linda, F.-J. Methner und Jan Schneider. 2020. Kinetic studies of L-ascorbic acid degradation in fruit juices for the improvement of pasteurization plants. BrewingScience 73, Nr. 7/8: 85–94. doi:https://doi.org/10.23763/BrSc20-13katsch, .","din1505-2-1":"Katsch, Linda ; Methner, F.-J. ; Schneider, Jan: Kinetic studies of L-ascorbic acid degradation in fruit juices for the improvement of pasteurization plants. In: BrewingScience Bd. 73. Nürnberg, Fachverlag Hans Carl GmbH (2020), Nr. 7/8, S. 85–94","ama":"Katsch L, Methner FJ, Schneider J. Kinetic studies of L-ascorbic acid degradation in fruit juices for the improvement of pasteurization plants. BrewingScience. 2020;73(7/8):85-94. doi:https://doi.org/10.23763/BrSc20-13katsch","van":"Katsch L, Methner FJ, Schneider J. Kinetic studies of L-ascorbic acid degradation in fruit juices for the improvement of pasteurization plants. BrewingScience. 2020;73(7/8):85–94.","havard":"L. Katsch, F.-J. Methner, J. Schneider, Kinetic studies of L-ascorbic acid degradation in fruit juices for the improvement of pasteurization plants, BrewingScience. 73 (2020) 85–94.","mla":"Katsch, Linda, et al. “Kinetic Studies of L-Ascorbic Acid Degradation in Fruit Juices for the Improvement of Pasteurization Plants.” BrewingScience, vol. 73, no. 7/8, 2020, pp. 85–94, https://doi.org/10.23763/BrSc20-13katsch.","bjps":"Katsch L, Methner F-J and Schneider J (2020) Kinetic Studies of L-Ascorbic Acid Degradation in Fruit Juices for the Improvement of Pasteurization Plants. BrewingScience 73, 85–94.","ufg":"Katsch, Linda/Methner, F.J./Schneider, Jan: Kinetic studies of L-ascorbic acid degradation in fruit juices for the improvement of pasteurization plants, in: BrewingScience 73 (2020), H. 7/8, S. 85–94.","ieee":"L. Katsch, F.-J. Methner, and J. Schneider, “Kinetic studies of L-ascorbic acid degradation in fruit juices for the improvement of pasteurization plants,” BrewingScience, vol. 73, no. 7/8, pp. 85–94, 2020, doi: https://doi.org/10.23763/BrSc20-13katsch.","apa":"Katsch, L., Methner, F.-J., & Schneider, J. (2020). Kinetic studies of L-ascorbic acid degradation in fruit juices for the improvement of pasteurization plants. BrewingScience, 73(7/8), 85–94. https://doi.org/10.23763/BrSc20-13katsch","chicago":"Katsch, Linda, F.-J. Methner, and Jan Schneider. “Kinetic Studies of L-Ascorbic Acid Degradation in Fruit Juices for the Improvement of Pasteurization Plants.” BrewingScience 73, no. 7/8 (2020): 85–94. https://doi.org/10.23763/BrSc20-13katsch."},"volume":73,"has_accepted_license":"1","doi":"https://doi.org/10.23763/BrSc20-13katsch","_id":"5418","place":"Nürnberg","type":"scientific_journal_article","intvolume":" 73","user_id":"83781","abstract":[{"text":"Pasteurization especially high-temperature short time (HTST) heating is a widely used preservation method which inactivates microorganisms and enzymes, but also degrades compounds as L-ascorbic acid. For a gentle dimensioning of a pasteurization plant the knowledge of the kinetic figures is important. Activation energy, reaction order and pre-exponential factor of the L-ascorbic acid degradation in a model solution, apple, orange and black currant juice were determined. Lines of equal effects, which indicate different time-temperature combinations for the degradation, could be derived and compared with the lethal effect on microorganisms. The activation energies were located in the area of 25 to 44 kJ/mol for all samples except of orange juice (74 kJ/mol) in the range of 40-90 ?C with a zeroth reaction order. Based on these values, the lines of equal effects showed a lesser degradation at higher temperatures and shorter holding times even in the typical setting range of pasteurization plants.","lang":"eng"}],"issue":"7/8","department":[{"_id":"DEP4023"},{"_id":"DEP4018"},{"_id":"DEP1308"}],"ddc":["570"],"quality_controlled":"1","publisher":"Fachverlag Hans Carl GmbH","article_type":"original","publication_status":"published","file":[{"date_updated":"2024-07-19T12:41:51Z","creator":"schneja","relation":"main_file","description":"Veröffentlichungsvertrag fehlt, daher auf Closed gesetz, Link und DOI nicht open Acess","content_type":"application/pdf","file_name":"2020 Kinetic studies of L-ascorbic acid.pdf","date_created":"2023-01-07T15:52:30Z","file_size":2135707,"file_id":"9288","access_level":"closed"}]},{"language":[{"iso":"eng"}],"keyword":["Continuous mashing","Residence time distribution","Beer","Enzyme bioreactor","Maltose rest"],"date_updated":"2024-07-03T07:08:55Z","date_created":"2021-04-08T05:59:08Z","publication":"Biochemical Engineering Journal ","status":"public","year":"2020","author":[{"first_name":"Patrick","full_name":"Wefing, Patrick","last_name":"Wefing","id":"68976"},{"last_name":"Conradi","full_name":"Conradi, Florian","id":"68967","first_name":"Florian"},{"last_name":"Trilling-Haasler","full_name":"Trilling-Haasler, Marc","id":"81622","first_name":"Marc","orcid":"0000-0002-3685-6383"},{"first_name":"Peter","full_name":"Neubauer, Peter","last_name":"Neubauer"},{"orcid":"0000-0001-6401-8873","first_name":"Jan","id":"13209","last_name":"Schneider","full_name":"Schneider, Jan"}],"volume":164,"citation":{"ufg":"Wefing, Patrick u. a.: Approach for modelling the extract formation in continuous conducted „beta-amylase rest“ as part of the production of beer mash with targeted sugar content, in: Biochemical Engineering Journal 164 (2020).","havard":"P. Wefing, F. Conradi, M. Trilling-Haasler, P. Neubauer, J. Schneider, Approach for modelling the extract formation in continuous conducted “beta-amylase rest” as part of the production of beer mash with targeted sugar content, Biochemical Engineering Journal . 164 (2020).","bjps":"Wefing P et al. (2020) Approach for Modelling the Extract Formation in Continuous Conducted ‘Beta-Amylase Rest’ as Part of the Production of Beer Mash with Targeted Sugar Content. Biochemical Engineering Journal 164.","mla":"Wefing, Patrick, et al. “Approach for Modelling the Extract Formation in Continuous Conducted ‘Beta-Amylase Rest’ as Part of the Production of Beer Mash with Targeted Sugar Content.” Biochemical Engineering Journal , vol. 164, 107765, 2020, https://doi.org/10.1016/j.bej.2020.107765.","van":"Wefing P, Conradi F, Trilling-Haasler M, Neubauer P, Schneider J. Approach for modelling the extract formation in continuous conducted “beta-amylase rest” as part of the production of beer mash with targeted sugar content. Biochemical Engineering Journal . 2020;164.","chicago":"Wefing, Patrick, Florian Conradi, Marc Trilling-Haasler, Peter Neubauer, and Jan Schneider. “Approach for Modelling the Extract Formation in Continuous Conducted ‘Beta-Amylase Rest’ as Part of the Production of Beer Mash with Targeted Sugar Content.” Biochemical Engineering Journal 164 (2020). https://doi.org/10.1016/j.bej.2020.107765.","apa":"Wefing, P., Conradi, F., Trilling-Haasler, M., Neubauer, P., & Schneider, J. (2020). Approach for modelling the extract formation in continuous conducted “beta-amylase rest” as part of the production of beer mash with targeted sugar content. Biochemical Engineering Journal , 164, Article 107765. https://doi.org/10.1016/j.bej.2020.107765","din1505-2-1":"Wefing, Patrick ; Conradi, Florian ; Trilling-Haasler, Marc ; Neubauer, Peter ; Schneider, Jan: Approach for modelling the extract formation in continuous conducted „beta-amylase rest“ as part of the production of beer mash with targeted sugar content. In: Biochemical Engineering Journal Bd. 164 (2020)","chicago-de":"Wefing, Patrick, Florian Conradi, Marc Trilling-Haasler, Peter Neubauer und Jan Schneider. 2020. Approach for modelling the extract formation in continuous conducted „beta-amylase rest“ as part of the production of beer mash with targeted sugar content. Biochemical Engineering Journal 164. doi:10.1016/j.bej.2020.107765, .","short":"P. Wefing, F. Conradi, M. Trilling-Haasler, P. Neubauer, J. Schneider, Biochemical Engineering Journal 164 (2020).","ama":"Wefing P, Conradi F, Trilling-Haasler M, Neubauer P, Schneider J. Approach for modelling the extract formation in continuous conducted “beta-amylase rest” as part of the production of beer mash with targeted sugar content. Biochemical Engineering Journal . 2020;164. doi:10.1016/j.bej.2020.107765","ieee":"P. Wefing, F. Conradi, M. Trilling-Haasler, P. Neubauer, and J. Schneider, “Approach for modelling the extract formation in continuous conducted ‘beta-amylase rest’ as part of the production of beer mash with targeted sugar content,” Biochemical Engineering Journal , vol. 164, Art. no. 107765, 2020, doi: 10.1016/j.bej.2020.107765."},"title":"Approach for modelling the extract formation in continuous conducted \"beta-amylase rest\" as part of the production of beer mash with targeted sugar content","article_number":"107765","doi":"10.1016/j.bej.2020.107765","_id":"5419","intvolume":" 164","user_id":"83780","type":"journal_article","quality_controlled":"1","abstract":[{"lang":"eng","text":"Continuous mashing provides advantages compared to conventional batch-wise mashing in terms of space time yield. The majority of fermentable sugars are generated during the so-called “β-amylase rest” (62–64 ◦C). These low molecular sugars are fermented later in the brewing process by yeasts and therefore determine the beer attenuation degree. Biological malt variations complicate the application of a continuous system in industrial scale particularly concerning targeted quality parameters. The aim is the prediction of sugar formation from process parameters for a real time control system. Therefore, a semi-empirical model for sugar formation in a continuous stirred tank reactor (CSTR) system was developed under incorporation of the residence time distri- bution (RTD). The here presented model, which focuses on the “β-amylase rest”, is able to predict fermentable sugar concentrations in the continuous “β-amylase rest” with sufficient accuracy, in contrast to models that only use the flow rate and the reactor volume to determine the reaction time. However, the precision and trueness depend on the quality of the empirical data acquired previously in laboratory experiments for the selected temperature and raw material quality."}],"department":[{"_id":"DEP4023"},{"_id":"DEP1308"},{"_id":"DEP4018"}],"publication_status":"published","article_type":"original"},{"language":[{"iso":"eng"}],"keyword":["Continuous manufacturing","Delayed-release","FT-NIR","Inline particle size analysis","Hot melt extrusion"],"date_created":"2025-04-23T08:40:12Z","publication":"Journal of Pharmaceutical Sciences","publication_identifier":{"issn":["0022-3549"],"eissn":["1520-6017"]},"date_updated":"2025-06-26T13:25:32Z","external_id":{"isi":["000590406100010"]},"year":"2020","author":[{"full_name":"Vo, Anh Q.","first_name":"Anh Q.","last_name":"Vo"},{"full_name":"Kutz, Gerd","id":"12015","last_name":"Kutz","first_name":"Gerd"},{"first_name":"Herman","last_name":"He","full_name":"He, Herman"},{"last_name":"Narala","first_name":"Sagar","full_name":"Narala, Sagar"},{"full_name":"Bandari, Suresh","first_name":"Suresh","last_name":"Bandari"},{"last_name":"Repka","full_name":"Repka, Michael A.","first_name":"Michael A."}],"page":"3598-3607","status":"public","title":"Continuous Manufacturing of Ketoprofen Delayed Release Pellets Using Melt Extrusion Technology: Application of QbD Design Space, Inline Near Infrared, and Inline Pellet Size Analysis","citation":{"ieee":"A. Q. Vo, G. Kutz, H. He, S. Narala, S. Bandari, and M. A. Repka, “Continuous Manufacturing of Ketoprofen Delayed Release Pellets Using Melt Extrusion Technology: Application of QbD Design Space, Inline Near Infrared, and Inline Pellet Size Analysis,” Journal of Pharmaceutical Sciences, vol. 109, no. 12, pp. 3598–3607, 2020, doi: 10.1016/j.xphs.2020.09.007.","ama":"Vo AQ, Kutz G, He H, Narala S, Bandari S, Repka MA. Continuous Manufacturing of Ketoprofen Delayed Release Pellets Using Melt Extrusion Technology: Application of QbD Design Space, Inline Near Infrared, and Inline Pellet Size Analysis. Journal of Pharmaceutical Sciences. 2020;109(12):3598-3607. doi:10.1016/j.xphs.2020.09.007","apa":"Vo, A. Q., Kutz, G., He, H., Narala, S., Bandari, S., & Repka, M. A. (2020). Continuous Manufacturing of Ketoprofen Delayed Release Pellets Using Melt Extrusion Technology: Application of QbD Design Space, Inline Near Infrared, and Inline Pellet Size Analysis. Journal of Pharmaceutical Sciences, 109(12), 3598–3607. https://doi.org/10.1016/j.xphs.2020.09.007","chicago":"Vo, Anh Q., Gerd Kutz, Herman He, Sagar Narala, Suresh Bandari, and Michael A. Repka. “Continuous Manufacturing of Ketoprofen Delayed Release Pellets Using Melt Extrusion Technology: Application of QbD Design Space, Inline Near Infrared, and Inline Pellet Size Analysis.” Journal of Pharmaceutical Sciences 109, no. 12 (2020): 3598–3607. https://doi.org/10.1016/j.xphs.2020.09.007.","van":"Vo AQ, Kutz G, He H, Narala S, Bandari S, Repka MA. Continuous Manufacturing of Ketoprofen Delayed Release Pellets Using Melt Extrusion Technology: Application of QbD Design Space, Inline Near Infrared, and Inline Pellet Size Analysis. Journal of Pharmaceutical Sciences. 2020;109(12):3598–607.","mla":"Vo, Anh Q., et al. “Continuous Manufacturing of Ketoprofen Delayed Release Pellets Using Melt Extrusion Technology: Application of QbD Design Space, Inline Near Infrared, and Inline Pellet Size Analysis.” Journal of Pharmaceutical Sciences, vol. 109, no. 12, 2020, pp. 3598–607, https://doi.org/10.1016/j.xphs.2020.09.007.","havard":"A.Q. Vo, G. Kutz, H. He, S. Narala, S. Bandari, M.A. Repka, Continuous Manufacturing of Ketoprofen Delayed Release Pellets Using Melt Extrusion Technology: Application of QbD Design Space, Inline Near Infrared, and Inline Pellet Size Analysis, Journal of Pharmaceutical Sciences. 109 (2020) 3598–3607.","bjps":"Vo AQ et al. (2020) Continuous Manufacturing of Ketoprofen Delayed Release Pellets Using Melt Extrusion Technology: Application of QbD Design Space, Inline Near Infrared, and Inline Pellet Size Analysis. Journal of Pharmaceutical Sciences 109, 3598–3607.","ufg":"Vo, Anh Q. u. a.: Continuous Manufacturing of Ketoprofen Delayed Release Pellets Using Melt Extrusion Technology: Application of QbD Design Space, Inline Near Infrared, and Inline Pellet Size Analysis, in: Journal of Pharmaceutical Sciences 109 (2020), H. 12, S. 3598–3607.","short":"A.Q. Vo, G. Kutz, H. He, S. Narala, S. Bandari, M.A. Repka, Journal of Pharmaceutical Sciences 109 (2020) 3598–3607.","din1505-2-1":"Vo, Anh Q. ; Kutz, Gerd ; He, Herman ; Narala, Sagar ; Bandari, Suresh ; Repka, Michael A.: Continuous Manufacturing of Ketoprofen Delayed Release Pellets Using Melt Extrusion Technology: Application of QbD Design Space, Inline Near Infrared, and Inline Pellet Size Analysis. In: Journal of Pharmaceutical Sciences Bd. 109. Amsterdam [u.a.], Elsevier BV (2020), Nr. 12, S. 3598–3607","chicago-de":"Vo, Anh Q., Gerd Kutz, Herman He, Sagar Narala, Suresh Bandari und Michael A. Repka. 2020. Continuous Manufacturing of Ketoprofen Delayed Release Pellets Using Melt Extrusion Technology: Application of QbD Design Space, Inline Near Infrared, and Inline Pellet Size Analysis. Journal of Pharmaceutical Sciences 109, Nr. 12: 3598–3607. doi:10.1016/j.xphs.2020.09.007, ."},"volume":109,"doi":"10.1016/j.xphs.2020.09.007","_id":"12835","place":"Amsterdam [u.a.]","type":"scientific_journal_article","intvolume":" 109","user_id":"83781","abstract":[{"text":"Delayed-release dosage forms are mainly manufactured as batch processes and include coated tablets, pellets, or particles with gastric resistant polymers. Authors propose a novel approach using the hot-melt extrusion technique to prepare delayed release dosage forms via a continuous manufacturing process, a new trend in the pharmaceutical industry. A full factorial design was employed to correlate input variables, including stearic acid (SA) content, drug content, and pellet size with drug release properties of the pellets. PLS fit method suitably elaborated the relationship between input and output variables with reasonably good fit and goodness of prediction. All three input factors influenced drug release in enzyme-free simulated gastric fluid (SGF) after 120 min; however, SA content did not significantly affect drug dissolution in the enzyme-free simulated intestinal fluid (SIF). An optimized formulation and design space were determined by overlaying multiple contours established from regression equations. The continuous manufacturing process was successfully monitored using inline near-infrared (NIR) and inline particle size analysis, with drug load and pellet size being well-controlled within the design space. The obtained pellets released less than 5% after 120 min in SGF and more than 85% and 95% after 30 min and 45 min, respectively, after switching to SIF. (C) 2020 American Pharmacists Association (R). Published by Elsevier Inc. All rights reserved.","lang":"eng"}],"issue":"12","department":[{"_id":"DEP4028"}],"publisher":"Elsevier BV","isi":"1","publication_status":"published"},{"language":[{"iso":"eng"}],"keyword":["3D printing","stereolithography","optical lens","light forming structures","convex lenses","concave lenses","refraction of light","focal length"],"date_created":"2022-04-19T10:59:03Z","publication_identifier":{"isbn":["978-3-946856-04-7"]},"publication":"\t Production engineering and management : proceedings 9th international conference, October 03 and 04, 2019, Trieste, Italy","editor":[{"full_name":"Padoano, Elio","first_name":"Elio","last_name":"Padoano"},{"last_name":"Villmer","id":"14290","full_name":"Villmer, Franz-Josef","first_name":"Franz-Josef"}],"date_updated":"2024-04-19T12:54:20Z","year":"2019","author":[{"first_name":"Abhijeet Narendra","full_name":"Shrotri, Abhijeet Narendra","id":"74090","last_name":"Shrotri","orcid":"0000-0003-2116-156X"},{"last_name":"Beyer","first_name":"Micha","full_name":"Beyer, Micha","id":"71403"},{"orcid":"https://orcid.org/0000-0001-7293-6893","first_name":"Oliver","last_name":"Stübbe","id":"51864","full_name":"Stübbe, Oliver"}],"page":"227-240","status":"public","title":"Evaluation of stereolithograghy processes for the production of lens prototypes","citation":{"din1505-2-1":"Shrotri, Abhijeet Narendra ; Beyer, Micha ; Stübbe, Oliver ; Padoano, E. ; Villmer, F.-J. (Hrsg.): Evaluation of stereolithograghy processes for the production of lens prototypes, Publication series in direct digital manufacturing . Bd. 2019, 01. Lemgo : Technische Hochschule Ostwestfalen-Lippe, 2019","chicago-de":"Shrotri, Abhijeet Narendra, Micha Beyer und Oliver Stübbe. 2019. Evaluation of stereolithograghy processes for the production of lens prototypes. Hg. von Elio Padoano und Franz-Josef Villmer. Production engineering and management : proceedings 9th international conference, October 03 and 04, 2019, Trieste, Italy. Bd. 2019, 01. Publication series in direct digital manufacturing . Lemgo: Technische Hochschule Ostwestfalen-Lippe.","short":"A.N. Shrotri, M. Beyer, O. Stübbe, Evaluation of Stereolithograghy Processes for the Production of Lens Prototypes, Technische Hochschule Ostwestfalen-Lippe, Lemgo, 2019.","havard":"A.N. Shrotri, M. Beyer, O. Stübbe, Evaluation of stereolithograghy processes for the production of lens prototypes, Technische Hochschule Ostwestfalen-Lippe, Lemgo, 2019.","mla":"Shrotri, Abhijeet Narendra, et al. “Evaluation of Stereolithograghy Processes for the Production of Lens Prototypes.” Production Engineering and Management : Proceedings 9th International Conference, October 03 and 04, 2019, Trieste, Italy, edited by Elio Padoano and Franz-Josef Villmer, vol. 2019, 01, Technische Hochschule Ostwestfalen-Lippe, 2019, pp. 227–40.","bjps":"Shrotri AN, Beyer M and Stübbe O (2019) Evaluation of Stereolithograghy Processes for the Production of Lens Prototypes, Padoano E and Villmer F-J (eds). Lemgo: Technische Hochschule Ostwestfalen-Lippe.","ufg":"Shrotri, Abhijeet Narendra/Beyer, Micha/Stübbe, Oliver: Evaluation of stereolithograghy processes for the production of lens prototypes, Bd. 2019, 01, hg. von Padoano, Elio/Villmer, Franz-Josef, Lemgo 2019 (Publication series in direct digital manufacturing ).","ama":"Shrotri AN, Beyer M, Stübbe O. Evaluation of Stereolithograghy Processes for the Production of Lens Prototypes. Vol 2019, 01. (Padoano E, Villmer FJ, eds.). Technische Hochschule Ostwestfalen-Lippe; 2019:227-240.","van":"Shrotri AN, Beyer M, Stübbe O. Evaluation of stereolithograghy processes for the production of lens prototypes. Padoano E, Villmer FJ, editors. Production engineering and management : proceedings 9th international conference, October 03 and 04, 2019, Trieste, Italy. Lemgo: Technische Hochschule Ostwestfalen-Lippe; 2019. (Publication series in direct digital manufacturing ; vols. 2019, 01).","chicago":"Shrotri, Abhijeet Narendra, Micha Beyer, and Oliver Stübbe. Evaluation of Stereolithograghy Processes for the Production of Lens Prototypes. Edited by Elio Padoano and Franz-Josef Villmer. Production Engineering and Management : Proceedings 9th International Conference, October 03 and 04, 2019, Trieste, Italy. Vol. 2019, 01. Publication Series in Direct Digital Manufacturing . Lemgo: Technische Hochschule Ostwestfalen-Lippe, 2019.","ieee":"A. N. Shrotri, M. Beyer, and O. Stübbe, Evaluation of stereolithograghy processes for the production of lens prototypes, vol. 2019, 01. Lemgo: Technische Hochschule Ostwestfalen-Lippe, 2019, pp. 227–240.","apa":"Shrotri, A. N., Beyer, M., & Stübbe, O. (2019). Evaluation of stereolithograghy processes for the production of lens prototypes. In E. Padoano & F.-J. Villmer (Eds.), Production engineering and management : proceedings 9th international conference, October 03 and 04, 2019, Trieste, Italy (Vols. 2019, 01, pp. 227–240). Technische Hochschule Ostwestfalen-Lippe."},"volume":"2019, 01","_id":"7679","place":"Lemgo","type":"conference_editor_article","user_id":"51864","conference":{"start_date":"2019-10-03","end_date":"2019-10-04","location":"Trieste","name":"9th International Conference on Production Engineering and Management (PEM)"},"department":[{"_id":"DEP5020"},{"_id":"DEP6020"},{"_id":"DEP5000"}],"publisher":"Technische Hochschule Ostwestfalen-Lippe","series_title":"Publication series in direct digital manufacturing ","publication_status":"published"},{"date_created":"2019-11-08T14:18:50Z","publication":"100 Years Bauhaus. What Interest Do We Take In Modern Movement Today?","editor":[{"first_name":"Michel","last_name":"Melenhorst","full_name":"Melenhorst, Michel","id":"51438"},{"orcid":"0000-0002-8594-3168","full_name":"Pottgiesser, Uta","id":"27166","last_name":"Pottgiesser","first_name":"Uta"},{"last_name":"Kellner","first_name":"Theresa ","full_name":"Kellner, Theresa "},{"first_name":"Franz ","last_name":"Jaschke","full_name":"Jaschke, Franz "}],"corporate_editor":["Hochschule Ostwestfalen-Lippe","Docomomo Deutschland e.V."],"date_updated":"2023-03-15T13:49:37Z","language":[{"iso":"eng"}],"title":"The Minimum Dwelling: New Belgrade Flat and Reflections on the Minimum Today","citation":{"ama":"Dragutinovic A, Pottgiesser U, Melenhorst M. The Minimum Dwelling: New Belgrade Flat and Reflections on the Minimum Today. In: Melenhorst M, Pottgiesser U, Kellner T, Jaschke F, Hochschule Ostwestfalen-Lippe, eds. 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today?. Lemgo; 2019:352-365. doi:10.25644/ket1-wp97","ieee":"A. Dragutinovic, U. Pottgiesser, and M. Melenhorst, “The Minimum Dwelling: New Belgrade Flat and Reflections on the Minimum Today,” in 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today?, Berlin, 2019, pp. 352–365.","van":"Dragutinovic A, Pottgiesser U, Melenhorst M. The Minimum Dwelling: New Belgrade Flat and Reflections on the Minimum Today. In: Melenhorst M, Pottgiesser U, Kellner T, Jaschke F, Hochschule Ostwestfalen-Lippe, editors. 100 Years Bauhaus What Interest Do We Take In Modern Movement Today? Lemgo; 2019. p. 352–65.","ufg":"Dragutinovic, Anica et. al. (2019): The Minimum Dwelling: New Belgrade Flat and Reflections on the Minimum Today, in: Michel Melenhorst et. al. (Hgg.): 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today?, Lemgo, S. 352–365.","mla":"Dragutinovic, Anica, et al. “The Minimum Dwelling: New Belgrade Flat and Reflections on the Minimum Today.” 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today?, edited by Michel Melenhorst et al., 2019, pp. 352–65, doi:10.25644/ket1-wp97.","bjps":"Dragutinovic A, Pottgiesser U and Melenhorst M (2019) The Minimum Dwelling: New Belgrade Flat and Reflections on the Minimum Today. In Melenhorst Michel et al. (eds), 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? Lemgo, pp. 352–365.","havard":"A. Dragutinovic, U. Pottgiesser, M. Melenhorst, The Minimum Dwelling: New Belgrade Flat and Reflections on the Minimum Today, in: M. Melenhorst, U. Pottgiesser, T. Kellner, F. Jaschke, Hochschule Ostwestfalen-Lippe (Eds.), 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today?, Lemgo, 2019: pp. 352–365.","apa":"Dragutinovic, A., Pottgiesser, U., & Melenhorst, M. (2019). The Minimum Dwelling: New Belgrade Flat and Reflections on the Minimum Today. In M. Melenhorst, U. Pottgiesser, T. Kellner, F. Jaschke, & Hochschule Ostwestfalen-Lippe (Eds.), 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? (pp. 352–365). Lemgo. https://doi.org/10.25644/ket1-wp97","chicago":"Dragutinovic, Anica, Uta Pottgiesser, and Michael Melenhorst. “The Minimum Dwelling: New Belgrade Flat and Reflections on the Minimum Today.” In 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today?, edited by Michel Melenhorst, Uta Pottgiesser, Theresa Kellner, Franz Jaschke, and Hochschule Ostwestfalen-Lippe, 352–65. Lemgo, 2019. https://doi.org/10.25644/ket1-wp97.","short":"A. Dragutinovic, U. Pottgiesser, M. Melenhorst, in: M. Melenhorst, U. Pottgiesser, T. Kellner, F. Jaschke, Hochschule Ostwestfalen-Lippe (Eds.), 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today?, Lemgo, 2019, pp. 352–365.","din1505-2-1":"Dragutinovic, Anica ; Pottgiesser, Uta ; Melenhorst, Michael: The Minimum Dwelling: New Belgrade Flat and Reflections on the Minimum Today. In: Melenhorst, M. ; Pottgiesser, U. ; Kellner, T. ; Jaschke, F. ; Hochschule Ostwestfalen-Lippe (Hrsg.): 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today?. Lemgo, 2019, S. 352–365","chicago-de":"Dragutinovic, Anica, Uta Pottgiesser und Michael Melenhorst. 2019. The Minimum Dwelling: New Belgrade Flat and Reflections on the Minimum Today. In: 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today?, hg. von Michel Melenhorst, Uta Pottgiesser, Theresa Kellner, Franz Jaschke, und Hochschule Ostwestfalen-Lippe, 352–365. Lemgo. doi:10.25644/ket1-wp97, ."},"author":[{"orcid":"0000-0002-6962-5223","last_name":"Dragutinovic","id":"68875","first_name":"Anica","full_name":"Dragutinovic, Anica"},{"orcid":"0000-0002-8594-3168","last_name":"Pottgiesser","id":"27166","full_name":"Pottgiesser, Uta","first_name":"Uta"},{"full_name":"Melenhorst, Michael","first_name":"Michael","last_name":"Melenhorst","id":"51438"}],"year":2019,"page":"352-365","status":"public","type":"conference","user_id":"27166","doi":"10.25644/ket1-wp97","_id":"1932","place":"Lemgo","publication_status":"published","abstract":[{"text":"The concepts for the minimum dwelling investigated by inter-war modernists were further developed and largely applied in the construction of postwar large-scale housing. As elsewhere in post-war Europe, affordable housing was\r\nhigh on the agenda in Socialist Yugoslavia. The right to a residence was an imperative of the socialist state, which set an enormous housing construction program so that each family could be housed in its own apartment. To meet the huge\r\nhousing needs, another imperative was to build quickly and cheaply. New Belgrade, a project for the capital of the newly founded socialist state, eventually became the biggest construction field for providing societally owned flats for tens of thousands of inhabitants. The demand for huge amounts of flats, efficient construction and lowcosts dictated the optimization of design, standardization, and rationalization. The paper investigates the design of New Belgrade flats focusing on different aspects of the “minimum” that were applied. It additionally analyses how compared to the interwar\r\nconcepts the perspective on the minimal needs changed. Furthermore, it compares these standards and needs with the actual ones. The research aims to trace these changing perspectives on minimum, to rethink the modernist minimum\r\ndwelling and explore how it relates and reflects the minimum in design today. ","lang":"eng"}],"conference":{"location":"Berlin","name":"16th Docomomo Germany, 3 RMB Conference","start_date":"2019-03-01","end_date":"2019-03-01"},"department":[{"_id":"DEP1000"},{"_id":"DEP1055"}],"ddc":["720"]},{"publication":"at - Automatisierungstechnik 67 (10) ","date_created":"2019-11-22T12:51:13Z","type":"conference","user_id":"74004","date_updated":"2023-03-15T13:49:38Z","_id":"1993","language":[{"iso":"eng"}],"title":"Feature Fusion to Increase the Robustness of Machine Learners in Industrial Environments","citation":{"apa":"Holst, C.-A., & Lohweg, V. (2019). Feature Fusion to Increase the Robustness of Machine Learners in Industrial Environments. In at - Automatisierungstechnik 67 (10) (pp. 853–865). De Gruyter.","chicago":"Holst, Christoph-Alexander, and Volker Lohweg. “Feature Fusion to Increase the Robustness of Machine Learners in Industrial Environments.” In At - Automatisierungstechnik 67 (10) , 853–65. De Gruyter, 2019.","van":"Holst C-A, Lohweg V. Feature Fusion to Increase the Robustness of Machine Learners in Industrial Environments. In: at - Automatisierungstechnik 67 (10) . De Gruyter; 2019. p. 853–65.","havard":"C.-A. Holst, V. Lohweg, Feature Fusion to Increase the Robustness of Machine Learners in Industrial Environments, in: At - Automatisierungstechnik 67 (10) , De Gruyter, 2019: pp. 853–865.","mla":"Holst, Christoph-Alexander, and Volker Lohweg. “Feature Fusion to Increase the Robustness of Machine Learners in Industrial Environments.” At - Automatisierungstechnik 67 (10) , De Gruyter, 2019, pp. 853–65.","bjps":"Holst C-A and Lohweg V (2019) Feature Fusion to Increase the Robustness of Machine Learners in Industrial Environments. At - Automatisierungstechnik 67 (10) . De Gruyter, pp. 853–865.","ufg":"Holst, Christoph-Alexander/Lohweg, Volker (2019): Feature Fusion to Increase the Robustness of Machine Learners in Industrial Environments, in: at - Automatisierungstechnik 67 (10) , S. 853–865.","short":"C.-A. Holst, V. Lohweg, in: At - Automatisierungstechnik 67 (10) , De Gruyter, 2019, pp. 853–865.","chicago-de":"Holst, Christoph-Alexander und Volker Lohweg. 2019. Feature Fusion to Increase the Robustness of Machine Learners in Industrial Environments. In: at - Automatisierungstechnik 67 (10) , 853–865. De Gruyter.","din1505-2-1":"Holst, Christoph-Alexander ; Lohweg, Volker: Feature Fusion to Increase the Robustness of Machine Learners in Industrial Environments. In: at - Automatisierungstechnik 67 (10) : De Gruyter, 2019, S. 853–865","ieee":"C.-A. Holst and V. Lohweg, “Feature Fusion to Increase the Robustness of Machine Learners in Industrial Environments,” in at - Automatisierungstechnik 67 (10) , 2019, pp. 853–865.","ama":"Holst C-A, Lohweg V. Feature Fusion to Increase the Robustness of Machine Learners in Industrial Environments. In: At - Automatisierungstechnik 67 (10) . De Gruyter; 2019:853-865."},"abstract":[{"text":"Industrial applications put special demands on machine learning algorithms. Noisy data, outliers, and sensor faults present an immense challenge for learners. A considerable part of machine learning research focuses on the selection of relevant, non-redundant features. This contribution details an approach to group and fuse redundant features prior to learning and classification. Features are grouped relying on a correlation-based redundancy measure. The fusion of features is guided by determining the majority observation based on possibility distributions. Furthermore, this paper studies the effects of feature fusion on the robustness and performance of classification with a focus on industrial applications. The approach is statistically evaluated on public datasets in comparison to classification on selected features only.","lang":"eng"}],"year":2019,"author":[{"full_name":"Holst, Christoph-Alexander","last_name":"Holst","id":"64782","first_name":"Christoph-Alexander"},{"orcid":"0000-0002-3325-7887","first_name":"Volker","id":"1804","full_name":"Lohweg, Volker","last_name":"Lohweg"}],"department":[{"_id":"DEP5023"}],"publisher":"De Gruyter","status":"public","page":"853-865"},{"user_id":"83781","date_updated":"2024-04-15T12:43:21Z","publication":"24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA2019) ","publication_identifier":{"isbn":["978-1-7281-0304-4"],"eisbn":["978-1-7281-0303-7","978-1-7281-0302-0"],"issn":["1946-0759"]},"type":"conference","date_created":"2019-11-22T12:51:15Z","place":"Piscataway, NJ","language":[{"iso":"eng"}],"_id":"1994","doi":"10.1109/ETFA.2019.8869514","citation":{"chicago-de":"Bator, Martyna, Alexander Dicks, Sahar Deppe und Volker Lohweg. 2019. Anomaly Detection with Root Cause Analysis for Bottling Process. In: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA2019) . Piscataway, NJ: IEEE. doi:10.1109/ETFA.2019.8869514, .","din1505-2-1":"Bator, Martyna ; Dicks, Alexander ; Deppe, Sahar ; Lohweg, Volker: Anomaly Detection with Root Cause Analysis for Bottling Process. In: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA2019) . Piscataway, NJ : IEEE, 2019","short":"M. Bator, A. Dicks, S. Deppe, V. Lohweg, in: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA2019) , IEEE, Piscataway, NJ, 2019.","ufg":"Bator, Martyna u. a.: Anomaly Detection with Root Cause Analysis for Bottling Process, in: o. Hg.: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA2019) , Piscataway, NJ 2019.","bjps":"Bator M et al. (2019) Anomaly Detection with Root Cause Analysis for Bottling Process. 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA2019) . Piscataway, NJ: IEEE.","havard":"M. Bator, A. Dicks, S. Deppe, V. Lohweg, Anomaly Detection with Root Cause Analysis for Bottling Process, in: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA2019) , IEEE, Piscataway, NJ, 2019.","mla":"Bator, Martyna, et al. “Anomaly Detection with Root Cause Analysis for Bottling Process.” 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA2019) , IEEE, 2019, https://doi.org/10.1109/ETFA.2019.8869514.","van":"Bator M, Dicks A, Deppe S, Lohweg V. Anomaly Detection with Root Cause Analysis for Bottling Process. In: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA2019) . Piscataway, NJ: IEEE; 2019.","ama":"Bator M, Dicks A, Deppe S, Lohweg V. Anomaly Detection with Root Cause Analysis for Bottling Process. In: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA2019) . IEEE; 2019. doi:10.1109/ETFA.2019.8869514","chicago":"Bator, Martyna, Alexander Dicks, Sahar Deppe, and Volker Lohweg. “Anomaly Detection with Root Cause Analysis for Bottling Process.” In 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA2019) . Piscataway, NJ: IEEE, 2019. https://doi.org/10.1109/ETFA.2019.8869514.","apa":"Bator, M., Dicks, A., Deppe, S., & Lohweg, V. (2019). Anomaly Detection with Root Cause Analysis for Bottling Process. 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA2019) . 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Zaragoza, Spain . https://doi.org/10.1109/ETFA.2019.8869514","ieee":"M. Bator, A. Dicks, S. Deppe, and V. Lohweg, “Anomaly Detection with Root Cause Analysis for Bottling Process,” presented at the 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Zaragoza, Spain , 2019. doi: 10.1109/ETFA.2019.8869514."},"publication_status":"published","title":"Anomaly Detection with Root Cause Analysis for Bottling Process","status":"public","publisher":"IEEE","author":[{"first_name":"Martyna","id":"46440","full_name":"Bator, Martyna","last_name":"Bator"},{"last_name":"Dicks","full_name":"Dicks, Alexander","id":"1853","first_name":"Alexander"},{"id":"52121","first_name":"Sahar","full_name":"Deppe, Sahar","last_name":"Deppe"},{"last_name":"Lohweg","full_name":"Lohweg, Volker","id":"1804","first_name":"Volker","orcid":"0000-0002-3325-7887"}],"year":"2019","department":[{"_id":"DEP5023"},{"_id":"DEP1308"}],"conference":{"end_date":"2019-09-13","start_date":"2019-09-10","location":" Zaragoza, Spain ","name":"24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)"},"abstract":[{"text":"In the filling and packaging industry, the trend is towards self-diagnosis, optimization, and quality monitoring of processes. The aim is to increase production volumes and the quality. These concepts require continuous monitoring and anomaly detection of the filling process. In addition, a root cause analysis of the failure is required because not every failure can be simulated or measured previously. Standard anomaly detection methods have no integrated root cause analysis. In this paper a fusion system is utilises for the detection of different unknown anomalies and also the failure source of them. The performance of this method is benchmarked with a real-word filling process.","lang":"eng"}]},{"status":"public","department":[{"_id":"DEP5023"}],"year":2019,"author":[{"first_name":"Christoph-Alexander","id":"64782","full_name":"Holst, Christoph-Alexander","last_name":"Holst"},{"full_name":"Röckemann, Kristian","first_name":"Kristian","last_name":"Röckemann"},{"last_name":"Steinmetz","first_name":"Andreas","full_name":"Steinmetz, Andreas","id":"55232"},{"orcid":"0000-0002-3325-7887","first_name":"Volker","last_name":"Lohweg","id":"1804","full_name":"Lohweg, Volker"}],"abstract":[{"lang":"eng","text":"The repair of carbon fibre reinforced polymer structures of aircraft is increasingly conducted on site. Monitoring the curing process of polymers has the potential to decrease repair costs by time optimisation and quality control. In this paper Lamb waves are utilised to determine the degree of cure. Waves are excited and recorded by two piezoelectric transducers, one serving as an actuator and the other as a sensor. The recorded signals are processed with a complex wavelet transform, which allows more accurate feature extraction than calculating features in time domain. Extracted features are the transmitted signal energy of the wave and the resonance frequency of the curing polymer. Waves are excited at different frequencies to identify the current resonance frequency. Excitation at or near the current resonant frequency ensures that curing is monitored with maximum sensitivity."}],"citation":{"ama":"Holst C-A, Röckemann K, Steinmetz A, Lohweg V. Lamb wave-based Cure Monitoring of Carbon Fibre Reinforced Polymers for On-site Aircraft Repairs. In: 5th IEEE International Forum on Research and Technologies for Society and Industry. Firenze, Italy; 2019.","van":"Holst C-A, Röckemann K, Steinmetz A, Lohweg V. Lamb wave-based Cure Monitoring of Carbon Fibre Reinforced Polymers for On-site Aircraft Repairs. In: 5th IEEE International Forum on Research and Technologies for Society and Industry. Firenze, Italy; 2019.","havard":"C.-A. Holst, K. Röckemann, A. Steinmetz, V. Lohweg, Lamb wave-based Cure Monitoring of Carbon Fibre Reinforced Polymers for On-site Aircraft Repairs, in: 5th IEEE International Forum on Research and Technologies for Society and Industry, Firenze, Italy, 2019.","mla":"Holst, Christoph-Alexander, et al. “Lamb Wave-Based Cure Monitoring of Carbon Fibre Reinforced Polymers for On-Site Aircraft Repairs.” 5th IEEE International Forum on Research and Technologies for Society and Industry, 2019.","bjps":"Holst C-A et al. (2019) Lamb Wave-Based Cure Monitoring of Carbon Fibre Reinforced Polymers for On-Site Aircraft Repairs. 5th IEEE International Forum on Research and Technologies for Society and Industry. Firenze, Italy.","ufg":"Holst, Christoph-Alexander et. al. (2019): Lamb wave-based Cure Monitoring of Carbon Fibre Reinforced Polymers for On-site Aircraft Repairs, in: 5th IEEE International Forum on Research and Technologies for Society and Industry, Firenze, Italy.","ieee":"C.-A. Holst, K. Röckemann, A. Steinmetz, and V. Lohweg, “Lamb wave-based Cure Monitoring of Carbon Fibre Reinforced Polymers for On-site Aircraft Repairs,” in 5th IEEE International Forum on Research and Technologies for Society and Industry, 2019.","apa":"Holst, C.-A., Röckemann, K., Steinmetz, A., & Lohweg, V. (2019). Lamb wave-based Cure Monitoring of Carbon Fibre Reinforced Polymers for On-site Aircraft Repairs. In 5th IEEE International Forum on Research and Technologies for Society and Industry. Firenze, Italy.","chicago":"Holst, Christoph-Alexander, Kristian Röckemann, Andreas Steinmetz, and Volker Lohweg. “Lamb Wave-Based Cure Monitoring of Carbon Fibre Reinforced Polymers for On-Site Aircraft Repairs.” In 5th IEEE International Forum on Research and Technologies for Society and Industry. Firenze, Italy, 2019.","short":"C.-A. Holst, K. Röckemann, A. Steinmetz, V. Lohweg, in: 5th IEEE International Forum on Research and Technologies for Society and Industry, Firenze, Italy, 2019.","din1505-2-1":"Holst, Christoph-Alexander ; Röckemann, Kristian ; Steinmetz, Andreas ; Lohweg, Volker: Lamb wave-based Cure Monitoring of Carbon Fibre Reinforced Polymers for On-site Aircraft Repairs. In: 5th IEEE International Forum on Research and Technologies for Society and Industry. Firenze, Italy, 2019","chicago-de":"Holst, Christoph-Alexander, Kristian Röckemann, Andreas Steinmetz und Volker Lohweg. 2019. Lamb wave-based Cure Monitoring of Carbon Fibre Reinforced Polymers for On-site Aircraft Repairs. In: 5th IEEE International Forum on Research and Technologies for Society and Industry. Firenze, Italy."},"title":"Lamb wave-based Cure Monitoring of Carbon Fibre Reinforced Polymers for On-site Aircraft Repairs","language":[{"iso":"eng"}],"place":"Firenze, Italy","_id":"1995","date_updated":"2023-03-15T13:49:38Z","user_id":"74004","type":"conference","date_created":"2019-11-22T12:51:16Z","publication":"5th IEEE International Forum on Research and Technologies for Society and Industry"},{"abstract":[{"lang":"eng","text":"Intelligent technical systems need to become more flexible and adaptive in the context of Cyber-Physical-Systems and Industry 4.0. Cash supply is very important for the worldwide economy. Within the supply chain, handling processes are highly automated, e.g., automated teller machines are installed to ensure an efficient and reliable cash supply. Recently, there is a trend in automated cash handling systems to replace the cash cassettes for each denomination by a simple pitch-in-plastic-bag for all banknotes. This necessitates new automated handling approaches because the bag content will unload irregularly. We propose a new approach which is able to detect the pose and possible occlusions of randomly distributed textured banknotes with simple smartphone cameras. This information can be used to control a handling robot-picking out banknotes."}],"department":[{"_id":"DEP5023"}],"year":2019,"author":[{"full_name":"Gillich, Eugen","first_name":"Eugen","last_name":"Gillich","id":"1706"},{"last_name":"Fritze","full_name":"Fritze, Alexander","first_name":"Alexander"},{"first_name":"Kai-Fabian","last_name":"Henning","id":"44017","full_name":"Henning, Kai-Fabian"},{"full_name":"Pfeifer, Anton","id":"52097","first_name":"Anton","last_name":"Pfeifer"},{"full_name":"Dörksen, Helene","id":"46416","last_name":"Dörksen","first_name":"Helene"},{"first_name":"Volker","id":"1804","last_name":"Lohweg","full_name":"Lohweg, Volker","orcid":"0000-0002-3325-7887"}],"status":"public","title":"Camera-based Occlusion Detection for Banknote Sorting","citation":{"din1505-2-1":"Gillich, Eugen ; Fritze, Alexander ; Henning, Kai-Fabian ; Pfeifer, Anton ; Dörksen, Helene ; Lohweg, Volker: Camera-based Occlusion Detection for Banknote Sorting. In: 5th IEEE International Forum on Research and Technologies for Society and Industry. Firenze, Italy, 2019","chicago-de":"Gillich, Eugen, Alexander Fritze, Kai-Fabian Henning, Anton Pfeifer, Helene Dörksen und Volker Lohweg. 2019. Camera-based Occlusion Detection for Banknote Sorting. In: 5th IEEE International Forum on Research and Technologies for Society and Industry. Firenze, Italy.","short":"E. Gillich, A. Fritze, K.-F. Henning, A. Pfeifer, H. Dörksen, V. Lohweg, in: 5th IEEE International Forum on Research and Technologies for Society and Industry, Firenze, Italy, 2019.","chicago":"Gillich, Eugen, Alexander Fritze, Kai-Fabian Henning, Anton Pfeifer, Helene Dörksen, and Volker Lohweg. “Camera-Based Occlusion Detection for Banknote Sorting.” In 5th IEEE International Forum on Research and Technologies for Society and Industry. Firenze, Italy, 2019.","ieee":"E. Gillich, A. Fritze, K.-F. Henning, A. Pfeifer, H. Dörksen, and V. Lohweg, “Camera-based Occlusion Detection for Banknote Sorting,” in 5th IEEE International Forum on Research and Technologies for Society and Industry, 2019.","apa":"Gillich, E., Fritze, A., Henning, K.-F., Pfeifer, A., Dörksen, H., & Lohweg, V. (2019). Camera-based Occlusion Detection for Banknote Sorting. In 5th IEEE International Forum on Research and Technologies for Society and Industry. Firenze, Italy.","bjps":"Gillich E et al. (2019) Camera-Based Occlusion Detection for Banknote Sorting. 5th IEEE International Forum on Research and Technologies for Society and Industry. Firenze, Italy.","havard":"E. Gillich, A. Fritze, K.-F. Henning, A. Pfeifer, H. Dörksen, V. Lohweg, Camera-based Occlusion Detection for Banknote Sorting, in: 5th IEEE International Forum on Research and Technologies for Society and Industry, Firenze, Italy, 2019.","mla":"Gillich, Eugen, et al. “Camera-Based Occlusion Detection for Banknote Sorting.” 5th IEEE International Forum on Research and Technologies for Society and Industry, 2019.","ufg":"Gillich, Eugen et. al. (2019): Camera-based Occlusion Detection for Banknote Sorting, in: 5th IEEE International Forum on Research and Technologies for Society and Industry, Firenze, Italy.","ama":"Gillich E, Fritze A, Henning K-F, Pfeifer A, Dörksen H, Lohweg V. Camera-based Occlusion Detection for Banknote Sorting. In: 5th IEEE International Forum on Research and Technologies for Society and Industry. Firenze, Italy; 2019.","van":"Gillich E, Fritze A, Henning K-F, Pfeifer A, Dörksen H, Lohweg V. Camera-based Occlusion Detection for Banknote Sorting. In: 5th IEEE International Forum on Research and Technologies for Society and Industry. Firenze, Italy; 2019."},"_id":"1996","language":[{"iso":"eng"}],"place":"Firenze, Italy","type":"conference","date_created":"2019-11-22T12:51:17Z","publication":"5th IEEE International Forum on Research and Technologies for Society and Industry","date_updated":"2023-03-15T13:49:38Z","user_id":"74004"},{"status":"public","department":[{"_id":"DEP5023"}],"year":2019,"author":[{"orcid":"0000-0002-3325-7887","id":"1804","full_name":"Lohweg, Volker","last_name":"Lohweg","first_name":"Volker"}],"citation":{"ieee":"V. Lohweg, “Über Informationsfusion von Daten im industriellen Kontext,” in 19. Data-Science-Ruhrgebiet-Konferenz (Vortrag), 2019.","ama":"Lohweg V. Über Informationsfusion von Daten im industriellen Kontext. In: 19. Data-Science-Ruhrgebiet-Konferenz (Vortrag),. Bochum, BO-I-T; 2019.","apa":"Lohweg, V. (2019). Über Informationsfusion von Daten im industriellen Kontext. In 19. Data-Science-Ruhrgebiet-Konferenz (Vortrag),. Bochum, BO-I-T.","chicago":"Lohweg, Volker. “Über Informationsfusion von Daten Im Industriellen Kontext.” In 19. Data-Science-Ruhrgebiet-Konferenz (Vortrag),. Bochum, BO-I-T, 2019.","van":"Lohweg V. Über Informationsfusion von Daten im industriellen Kontext. In: 19 Data-Science-Ruhrgebiet-Konferenz (Vortrag),. Bochum, BO-I-T; 2019.","ufg":"Lohweg, Volker (2019): Über Informationsfusion von Daten im industriellen Kontext, in: 19. Data-Science-Ruhrgebiet-Konferenz (Vortrag),, Bochum, BO-I-T.","bjps":"Lohweg V (2019) Über Informationsfusion von Daten Im Industriellen Kontext. 19. Data-Science-Ruhrgebiet-Konferenz (Vortrag),. Bochum, BO-I-T.","havard":"V. Lohweg, Über Informationsfusion von Daten im industriellen Kontext, in: 19. Data-Science-Ruhrgebiet-Konferenz (Vortrag), Bochum, BO-I-T, 2019.","mla":"Lohweg, Volker. “Über Informationsfusion von Daten Im Industriellen Kontext.” 19. Data-Science-Ruhrgebiet-Konferenz (Vortrag), 2019.","short":"V. Lohweg, in: 19. Data-Science-Ruhrgebiet-Konferenz (Vortrag), Bochum, BO-I-T, 2019.","din1505-2-1":"Lohweg, Volker: Über Informationsfusion von Daten im industriellen Kontext. In: 19. Data-Science-Ruhrgebiet-Konferenz (Vortrag),. Bochum, BO-I-T, 2019","chicago-de":"Lohweg, Volker. 2019. Über Informationsfusion von Daten im industriellen Kontext. In: 19. Data-Science-Ruhrgebiet-Konferenz (Vortrag),. Bochum, BO-I-T."},"title":"Über Informationsfusion von Daten im industriellen Kontext","_id":"1997","language":[{"iso":"eng"}],"place":"Bochum, BO-I-T","date_updated":"2023-03-15T13:49:38Z","user_id":"68554","type":"conference","date_created":"2019-11-22T12:51:19Z","publication":"19. Data-Science-Ruhrgebiet-Konferenz (Vortrag),"},{"user_id":"68554","date_updated":"2023-03-15T13:49:38Z","publication":"22nd International Conference on Information Fusion (FUSION)","type":"conference","date_created":"2019-11-22T12:51:20Z","place":"Ottawa, Canada","language":[{"iso":"eng"}],"_id":"1998","citation":{"apa":"Holst, C.-A., & Lohweg, V. (2019). Improving Majority-guided Fuzzy Information Fusion for Industry 4.0 Condition Monitoring. In 22nd International Conference on Information Fusion (FUSION). Ottawa, Canada.","chicago":"Holst, Christoph-Alexander, and Volker Lohweg. “Improving Majority-Guided Fuzzy Information Fusion for Industry 4.0 Condition Monitoring.” In 22nd International Conference on Information Fusion (FUSION). Ottawa, Canada, 2019.","van":"Holst C-A, Lohweg V. Improving Majority-guided Fuzzy Information Fusion for Industry 4.0 Condition Monitoring. In: 22nd International Conference on Information Fusion (FUSION). Ottawa, Canada; 2019.","havard":"C.-A. Holst, V. Lohweg, Improving Majority-guided Fuzzy Information Fusion for Industry 4.0 Condition Monitoring, in: 22nd International Conference on Information Fusion (FUSION), Ottawa, Canada, 2019.","bjps":"Holst C-A and Lohweg V (2019) Improving Majority-Guided Fuzzy Information Fusion for Industry 4.0 Condition Monitoring. 22nd International Conference on Information Fusion (FUSION). Ottawa, Canada.","mla":"Holst, Christoph-Alexander, and Volker Lohweg. “Improving Majority-Guided Fuzzy Information Fusion for Industry 4.0 Condition Monitoring.” 22nd International Conference on Information Fusion (FUSION), 2019.","ufg":"Holst, Christoph-Alexander/Lohweg, Volker (2019): Improving Majority-guided Fuzzy Information Fusion for Industry 4.0 Condition Monitoring, in: 22nd International Conference on Information Fusion (FUSION), Ottawa, Canada.","short":"C.-A. Holst, V. Lohweg, in: 22nd International Conference on Information Fusion (FUSION), Ottawa, Canada, 2019.","din1505-2-1":"Holst, Christoph-Alexander ; Lohweg, Volker: Improving Majority-guided Fuzzy Information Fusion for Industry 4.0 Condition Monitoring. In: 22nd International Conference on Information Fusion (FUSION). Ottawa, Canada, 2019","chicago-de":"Holst, Christoph-Alexander und Volker Lohweg. 2019. Improving Majority-guided Fuzzy Information Fusion for Industry 4.0 Condition Monitoring. In: 22nd International Conference on Information Fusion (FUSION). Ottawa, Canada.","ieee":"C.-A. Holst and V. Lohweg, “Improving Majority-guided Fuzzy Information Fusion for Industry 4.0 Condition Monitoring,” in 22nd International Conference on Information Fusion (FUSION), 2019.","ama":"Holst C-A, Lohweg V. Improving Majority-guided Fuzzy Information Fusion for Industry 4.0 Condition Monitoring. In: 22nd International Conference on Information Fusion (FUSION). Ottawa, Canada; 2019."},"title":"Improving Majority-guided Fuzzy Information Fusion for Industry 4.0 Condition Monitoring","status":"public","author":[{"first_name":"Christoph-Alexander","id":"64782","last_name":"Holst","full_name":"Holst, Christoph-Alexander"},{"orcid":"0000-0002-3325-7887","last_name":"Lohweg","full_name":"Lohweg, Volker","id":"1804","first_name":"Volker"}],"year":2019,"department":[{"_id":"DEP5023"}]},{"status":"public","author":[{"last_name":"Lohweg","first_name":"Volker","full_name":"Lohweg, Volker","id":"1804","orcid":"0000-0002-3325-7887"}],"year":2019,"department":[{"_id":"DEP5023"}],"citation":{"ama":"Lohweg V. Künstliche Intelligenz. Schlossrunde 2019, Wirtschaft trifft Wissenschaft (eingeladener Vortrag), Abtei Marienmünster. 2019.","ieee":"V. Lohweg, “Künstliche Intelligenz,” Schlossrunde 2019, Wirtschaft trifft Wissenschaft (eingeladener Vortrag), Abtei Marienmünster, 2019.","chicago-de":"Lohweg, Volker. 2019. Künstliche Intelligenz. Schlossrunde 2019, Wirtschaft trifft Wissenschaft (eingeladener Vortrag), Abtei Marienmünster.","din1505-2-1":"Lohweg, Volker: Künstliche Intelligenz. In: Schlossrunde 2019, Wirtschaft trifft Wissenschaft (eingeladener Vortrag), Abtei Marienmünster (2019)","short":"V. Lohweg, Schlossrunde 2019, Wirtschaft Trifft Wissenschaft (Eingeladener Vortrag), Abtei Marienmünster (2019).","ufg":"Lohweg, Volker (2019): Künstliche Intelligenz, in: Schlossrunde 2019, Wirtschaft trifft Wissenschaft (eingeladener Vortrag), Abtei Marienmünster.","bjps":"Lohweg V (2019) Künstliche Intelligenz. Schlossrunde 2019, Wirtschaft trifft Wissenschaft (eingeladener Vortrag), Abtei Marienmünster.","mla":"Lohweg, Volker. “Künstliche Intelligenz.” Schlossrunde 2019, Wirtschaft Trifft Wissenschaft (Eingeladener Vortrag), Abtei Marienmünster, 2019.","havard":"V. Lohweg, Künstliche Intelligenz, Schlossrunde 2019, Wirtschaft Trifft Wissenschaft (Eingeladener Vortrag), Abtei Marienmünster. (2019).","van":"Lohweg V. Künstliche Intelligenz. Schlossrunde 2019, Wirtschaft trifft Wissenschaft (eingeladener Vortrag), Abtei Marienmünster. 2019;","chicago":"Lohweg, Volker. “Künstliche Intelligenz.” Schlossrunde 2019, Wirtschaft Trifft Wissenschaft (Eingeladener Vortrag), Abtei Marienmünster, 2019.","apa":"Lohweg, V. (2019). Künstliche Intelligenz. Schlossrunde 2019, Wirtschaft Trifft Wissenschaft (Eingeladener Vortrag), Abtei Marienmünster."},"title":"Künstliche Intelligenz","_id":"1999","language":[{"iso":"eng"}],"user_id":"68554","date_updated":"2023-03-15T13:49:38Z","publication":"Schlossrunde 2019, Wirtschaft trifft Wissenschaft (eingeladener Vortrag), Abtei Marienmünster","type":"journal_article","date_created":"2019-11-22T12:51:21Z"},{"publication":"Digital Document Security","type":"conference","date_created":"2019-11-22T12:51:23Z","user_id":"68554","date_updated":"2023-03-15T13:49:38Z","place":"Berlin","language":[{"iso":"eng"}],"_id":"2000","title":"Effective Protection of Physical Documents by Print Coding as Digital Tag and Authentication Methods","citation":{"short":"A. Pfeifer, H. Dörksen, V. Lohweg, in: Digital Document Security, Berlin, 2019.","din1505-2-1":"Pfeifer, Anton ; Dörksen, Helene ; Lohweg, Volker: Effective Protection of Physical Documents by Print Coding as Digital Tag and Authentication Methods. In: Digital Document Security. Berlin, 2019","chicago-de":"Pfeifer, Anton, Helene Dörksen und Volker Lohweg. 2019. Effective Protection of Physical Documents by Print Coding as Digital Tag and Authentication Methods. In: Digital Document Security. Berlin.","apa":"Pfeifer, A., Dörksen, H., & Lohweg, V. (2019). Effective Protection of Physical Documents by Print Coding as Digital Tag and Authentication Methods. In Digital Document Security. Berlin.","chicago":"Pfeifer, Anton, Helene Dörksen, and Volker Lohweg. “Effective Protection of Physical Documents by Print Coding as Digital Tag and Authentication Methods.” In Digital Document Security. Berlin, 2019.","van":"Pfeifer A, Dörksen H, Lohweg V. Effective Protection of Physical Documents by Print Coding as Digital Tag and Authentication Methods. In: Digital Document Security. Berlin; 2019.","bjps":"Pfeifer A, Dörksen H and Lohweg V (2019) Effective Protection of Physical Documents by Print Coding as Digital Tag and Authentication Methods. Digital Document Security. Berlin.","havard":"A. Pfeifer, H. Dörksen, V. Lohweg, Effective Protection of Physical Documents by Print Coding as Digital Tag and Authentication Methods, in: Digital Document Security, Berlin, 2019.","mla":"Pfeifer, Anton, et al. “Effective Protection of Physical Documents by Print Coding as Digital Tag and Authentication Methods.” Digital Document Security, 2019.","ufg":"Pfeifer, Anton et. al. (2019): Effective Protection of Physical Documents by Print Coding as Digital Tag and Authentication Methods, in: Digital Document Security, Berlin.","ieee":"A. Pfeifer, H. Dörksen, and V. Lohweg, “Effective Protection of Physical Documents by Print Coding as Digital Tag and Authentication Methods,” in Digital Document Security, 2019.","ama":"Pfeifer A, Dörksen H, Lohweg V. Effective Protection of Physical Documents by Print Coding as Digital Tag and Authentication Methods. In: Digital Document Security. Berlin; 2019."},"author":[{"last_name":"Pfeifer","first_name":"Anton","full_name":"Pfeifer, Anton","id":"52097"},{"full_name":"Dörksen, Helene","last_name":"Dörksen","id":"46416","first_name":"Helene"},{"orcid":"0000-0002-3325-7887","id":"1804","full_name":"Lohweg, Volker","last_name":"Lohweg","first_name":"Volker"}],"year":2019,"department":[{"_id":"DEP5023"}],"status":"public"},{"citation":{"short":"A. Dicks, C. Wissel, M. Bator, V. Lohweg, in: Kommunikation Und Bildverarbeitung in Der Automation - Ausgewählte Beiträge Der Jahreskolloquien KommA Und BVAu 2018, Springer, Berlin, Heidelberg, 2019, pp. 331–345.","din1505-2-1":"Dicks, Alexander ; Wissel, Christian ; Bator, Martyna ; Lohweg, Volker: Bildverarbeitung im industriellen Umfeld von Abfüllanlagen. In: Kommunikation und Bildverarbeitung in der Automation - Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018. Berlin, Heidelberg : Springer, 2019, S. 331–345","chicago-de":"Dicks, Alexander, Christian Wissel, Martyna Bator und Volker Lohweg. 2019. Bildverarbeitung im industriellen Umfeld von Abfüllanlagen. In: Kommunikation und Bildverarbeitung in der Automation - Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018, 331–345. Berlin, Heidelberg: Springer. doi:10.1007/978-3-662-59895-5_24, .","apa":"Dicks, A., Wissel, C., Bator, M., & Lohweg, V. (2019). Bildverarbeitung im industriellen Umfeld von Abfüllanlagen. Kommunikation Und Bildverarbeitung in Der Automation - Ausgewählte Beiträge Der Jahreskolloquien KommA Und BVAu 2018, 331–345. https://doi.org/10.1007/978-3-662-59895-5_24","chicago":"Dicks, Alexander, Christian Wissel, Martyna Bator, and Volker Lohweg. “Bildverarbeitung Im Industriellen Umfeld von Abfüllanlagen.” In Kommunikation Und Bildverarbeitung in Der Automation - Ausgewählte Beiträge Der Jahreskolloquien KommA Und BVAu 2018, 331–45. Berlin, Heidelberg: Springer, 2019. https://doi.org/10.1007/978-3-662-59895-5_24.","van":"Dicks A, Wissel C, Bator M, Lohweg V. Bildverarbeitung im industriellen Umfeld von Abfüllanlagen. In: Kommunikation und Bildverarbeitung in der Automation - Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018. Berlin, Heidelberg: Springer; 2019. p. 331–45.","bjps":"Dicks A et al. (2019) Bildverarbeitung Im Industriellen Umfeld von Abfüllanlagen. Kommunikation Und Bildverarbeitung in Der Automation - Ausgewählte Beiträge Der Jahreskolloquien KommA Und BVAu 2018. Berlin, Heidelberg: Springer, pp. 331–345.","mla":"Dicks, Alexander, et al. “Bildverarbeitung Im Industriellen Umfeld von Abfüllanlagen.” Kommunikation Und Bildverarbeitung in Der Automation - Ausgewählte Beiträge Der Jahreskolloquien KommA Und BVAu 2018, Springer, 2019, pp. 331–45, https://doi.org/10.1007/978-3-662-59895-5_24.","havard":"A. Dicks, C. Wissel, M. Bator, V. Lohweg, Bildverarbeitung im industriellen Umfeld von Abfüllanlagen, in: Kommunikation Und Bildverarbeitung in Der Automation - Ausgewählte Beiträge Der Jahreskolloquien KommA Und BVAu 2018, Springer, Berlin, Heidelberg, 2019: pp. 331–345.","ufg":"Dicks, Alexander u. a.: Bildverarbeitung im industriellen Umfeld von Abfüllanlagen, in: o. Hg.: Kommunikation und Bildverarbeitung in der Automation - Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018, Berlin, Heidelberg 2019, S. 331–345.","ieee":"A. Dicks, C. Wissel, M. Bator, and V. Lohweg, “Bildverarbeitung im industriellen Umfeld von Abfüllanlagen,” in Kommunikation und Bildverarbeitung in der Automation - Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018, Lemgo, 2019, pp. 331–345. doi: 10.1007/978-3-662-59895-5_24.","ama":"Dicks A, Wissel C, Bator M, Lohweg V. Bildverarbeitung im industriellen Umfeld von Abfüllanlagen. In: Kommunikation Und Bildverarbeitung in Der Automation - Ausgewählte Beiträge Der Jahreskolloquien KommA Und BVAu 2018. Springer; 2019:331-345. doi:10.1007/978-3-662-59895-5_24"},"title":"Bildverarbeitung im industriellen Umfeld von Abfüllanlagen","status":"public","page":"331-345","publisher":"Springer","author":[{"id":"1853","last_name":"Dicks","full_name":"Dicks, Alexander","first_name":"Alexander"},{"first_name":"Christian","last_name":"Wissel","id":"59157","full_name":"Wissel, Christian"},{"full_name":"Bator, Martyna","first_name":"Martyna","id":"46440","last_name":"Bator"},{"orcid":"0000-0002-3325-7887","last_name":"Lohweg","first_name":"Volker","full_name":"Lohweg, Volker","id":"1804"}],"year":"2019","department":[{"_id":"DEP5023"},{"_id":"DEP1308"}],"conference":{"location":"Lemgo","name":"Jahreskolloquien KommA und BVAu 2018","end_date":"2018-11-21","start_date":"2018-11-20"},"user_id":"83778","date_updated":"2024-04-15T12:51:59Z","publication":"Kommunikation und Bildverarbeitung in der Automation - Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018","date_created":"2019-11-22T12:51:24Z","type":"conference","place":"Berlin, Heidelberg","language":[{"iso":"eng"}],"_id":"2001","doi":"10.1007/978-3-662-59895-5_24"},{"_id":"2002","language":[{"iso":"eng"}],"place":"Werkhütte","type":"conference","date_created":"2019-11-22T12:51:25Z","publication":"Impulsvortrag","date_updated":"2023-03-15T13:49:38Z","user_id":"68554","department":[{"_id":"DEP5023"}],"author":[{"first_name":"Volker","id":"1804","full_name":"Lohweg, Volker","last_name":"Lohweg","orcid":"0000-0002-3325-7887"}],"year":2019,"status":"public","title":"Künstliche Intelligenz – Wie verändert sich durch Anwendungen der Künstlichen Intelligenz unser Leben und unsere Arbeit?","citation":{"apa":"Lohweg, V. (2019). Künstliche Intelligenz – Wie verändert sich durch Anwendungen der Künstlichen Intelligenz unser Leben und unsere Arbeit? In Impulsvortrag. Werkhütte.","chicago":"Lohweg, Volker. “Künstliche Intelligenz – Wie Verändert Sich Durch Anwendungen Der Künstlichen Intelligenz Unser Leben Und Unsere Arbeit?” In Impulsvortrag. Werkhütte, 2019.","van":"Lohweg V. Künstliche Intelligenz – Wie verändert sich durch Anwendungen der Künstlichen Intelligenz unser Leben und unsere Arbeit? In: Impulsvortrag. Werkhütte; 2019.","mla":"Lohweg, Volker. “Künstliche Intelligenz – Wie Verändert Sich Durch Anwendungen Der Künstlichen Intelligenz Unser Leben Und Unsere Arbeit?” Impulsvortrag, 2019.","bjps":"Lohweg V (2019) Künstliche Intelligenz – Wie Verändert Sich Durch Anwendungen Der Künstlichen Intelligenz Unser Leben Und Unsere Arbeit? Impulsvortrag. Werkhütte.","havard":"V. Lohweg, Künstliche Intelligenz – Wie verändert sich durch Anwendungen der Künstlichen Intelligenz unser Leben und unsere Arbeit?, in: Impulsvortrag, Werkhütte, 2019.","ufg":"Lohweg, Volker (2019): Künstliche Intelligenz – Wie verändert sich durch Anwendungen der Künstlichen Intelligenz unser Leben und unsere Arbeit?, in: Impulsvortrag, Werkhütte.","short":"V. Lohweg, in: Impulsvortrag, Werkhütte, 2019.","chicago-de":"Lohweg, Volker. 2019. Künstliche Intelligenz – Wie verändert sich durch Anwendungen der Künstlichen Intelligenz unser Leben und unsere Arbeit? In: Impulsvortrag. Werkhütte.","din1505-2-1":"Lohweg, Volker: Künstliche Intelligenz – Wie verändert sich durch Anwendungen der Künstlichen Intelligenz unser Leben und unsere Arbeit? In: Impulsvortrag. Werkhütte, 2019","ieee":"V. Lohweg, “Künstliche Intelligenz – Wie verändert sich durch Anwendungen der Künstlichen Intelligenz unser Leben und unsere Arbeit?,” in Impulsvortrag, 2019.","ama":"Lohweg V. Künstliche Intelligenz – Wie verändert sich durch Anwendungen der Künstlichen Intelligenz unser Leben und unsere Arbeit? In: Impulsvortrag. Werkhütte; 2019."}},{"user_id":"74004","date_updated":"2023-03-15T13:49:38Z","publication":"24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA2019)","date_created":"2019-11-22T12:54:24Z","type":"conference","place":"Zaragoza, Spain","language":[{"iso":"eng"}],"_id":"2003","citation":{"ieee":"C.-A. Holst, K. Röckemann, A. Steinmetz, and V. Lohweg, “Lamb Wave-based Quality Inspection of Repaired Carbon Fibre Reinforced Polymers for On-Site Aircraft Maintenance,” in 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA2019), 2019.","ama":"Holst C-A, Röckemann K, Steinmetz A, Lohweg V. Lamb Wave-based Quality Inspection of Repaired Carbon Fibre Reinforced Polymers for On-Site Aircraft Maintenance. In: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA2019). Zaragoza, Spain; 2019.","din1505-2-1":"Holst, Christoph-Alexander ; Röckemann, Kristian ; Steinmetz, Andreas ; Lohweg, Volker: Lamb Wave-based Quality Inspection of Repaired Carbon Fibre Reinforced Polymers for On-Site Aircraft Maintenance. In: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA2019). Zaragoza, Spain, 2019","chicago-de":"Holst, Christoph-Alexander, Kristian Röckemann, Andreas Steinmetz und Volker Lohweg. 2019. Lamb Wave-based Quality Inspection of Repaired Carbon Fibre Reinforced Polymers for On-Site Aircraft Maintenance. In: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA2019). Zaragoza, Spain.","short":"C.-A. Holst, K. Röckemann, A. Steinmetz, V. Lohweg, in: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA2019), Zaragoza, Spain, 2019.","chicago":"Holst, Christoph-Alexander, Kristian Röckemann, Andreas Steinmetz, and Volker Lohweg. “Lamb Wave-Based Quality Inspection of Repaired Carbon Fibre Reinforced Polymers for On-Site Aircraft Maintenance.” In 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA2019). Zaragoza, Spain, 2019.","apa":"Holst, C.-A., Röckemann, K., Steinmetz, A., & Lohweg, V. (2019). Lamb Wave-based Quality Inspection of Repaired Carbon Fibre Reinforced Polymers for On-Site Aircraft Maintenance. In 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA2019). Zaragoza, Spain.","havard":"C.-A. Holst, K. Röckemann, A. Steinmetz, V. Lohweg, Lamb Wave-based Quality Inspection of Repaired Carbon Fibre Reinforced Polymers for On-Site Aircraft Maintenance, in: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA2019), Zaragoza, Spain, 2019.","bjps":"Holst C-A et al. (2019) Lamb Wave-Based Quality Inspection of Repaired Carbon Fibre Reinforced Polymers for On-Site Aircraft Maintenance. 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA2019). Zaragoza, Spain.","mla":"Holst, Christoph-Alexander, et al. “Lamb Wave-Based Quality Inspection of Repaired Carbon Fibre Reinforced Polymers for On-Site Aircraft Maintenance.” 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA2019), 2019.","ufg":"Holst, Christoph-Alexander et. al. (2019): Lamb Wave-based Quality Inspection of Repaired Carbon Fibre Reinforced Polymers for On-Site Aircraft Maintenance, in: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA2019), Zaragoza, Spain.","van":"Holst C-A, Röckemann K, Steinmetz A, Lohweg V. Lamb Wave-based Quality Inspection of Repaired Carbon Fibre Reinforced Polymers for On-Site Aircraft Maintenance. In: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA2019). Zaragoza, Spain; 2019."},"title":"Lamb Wave-based Quality Inspection of Repaired Carbon Fibre Reinforced Polymers for On-Site Aircraft Maintenance","status":"public","author":[{"first_name":"Christoph-Alexander","full_name":"Holst, Christoph-Alexander","id":"64782","last_name":"Holst"},{"last_name":"Röckemann","full_name":"Röckemann, Kristian","first_name":"Kristian"},{"first_name":"Andreas","full_name":"Steinmetz, Andreas","last_name":"Steinmetz","id":"55232"},{"last_name":"Lohweg","first_name":"Volker","id":"1804","full_name":"Lohweg, Volker","orcid":"0000-0002-3325-7887"}],"year":2019,"department":[{"_id":"DEP5023"}],"abstract":[{"lang":"eng","text":"On-site aircraft repairs are gaining in importance due to the susceptibility of carbon fibre reinforced polymers to damage. Repairs themselves are required to be inspected for quality, preferably cost- and time-efficiently. This paper presents an approach for the inspection of repaired composites based on guided Lamb waves. The focus is on cost-effective signal excitation and effective signal processing. Lamb waves are excited with piezoelectric transducers at the resonance frequency of the material under test. Measured signals are processed with a complex wavelet transform to improve damage detection. The proposed approach is evaluated on two test specimens, one of which has a defect in the adhesive bond."}]},{"title":"Content Representation for Neural Style Transfer Algorithms based on Structural Similarity (Best Paper Award)","citation":{"short":"P. Meier, V. Lohweg, in: 29. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- Und Automatisierungstechnik (GMA) KIT Scientific Publishing, Karlsruhe, Dortmund, , 2019.","din1505-2-1":"Meier, Philip ; Lohweg, Volker: Content Representation for Neural Style Transfer Algorithms based on Structural Similarity (Best Paper Award). In: 29. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA) KIT Scientific Publishing. Karlsruhe, Dortmund, , 2019","chicago-de":"Meier, Philip und Volker Lohweg. 2019. Content Representation for Neural Style Transfer Algorithms based on Structural Similarity (Best Paper Award). In: 29. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA) KIT Scientific Publishing. Karlsruhe, Dortmund, .","apa":"Meier, P., & Lohweg, V. (2019). Content Representation for Neural Style Transfer Algorithms based on Structural Similarity (Best Paper Award). In 29. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA) KIT Scientific Publishing. Karlsruhe, Dortmund, .","chicago":"Meier, Philip, and Volker Lohweg. “Content Representation for Neural Style Transfer Algorithms Based on Structural Similarity (Best Paper Award).” In 29. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- Und Automatisierungstechnik (GMA) KIT Scientific Publishing. Karlsruhe, Dortmund, , 2019.","van":"Meier P, Lohweg V. Content Representation for Neural Style Transfer Algorithms based on Structural Similarity (Best Paper Award). In: 29 Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA) KIT Scientific Publishing. Karlsruhe, Dortmund, ; 2019.","ufg":"Meier, Philip/Lohweg, Volker (2019): Content Representation for Neural Style Transfer Algorithms based on Structural Similarity (Best Paper Award), in: 29. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA) KIT Scientific Publishing, Karlsruhe, Dortmund, .","mla":"Meier, Philip, and Volker Lohweg. “Content Representation for Neural Style Transfer Algorithms Based on Structural Similarity (Best Paper Award).” 29. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- Und Automatisierungstechnik (GMA) KIT Scientific Publishing, 2019.","bjps":"Meier P and Lohweg V (2019) Content Representation for Neural Style Transfer Algorithms Based on Structural Similarity (Best Paper Award). 29. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- Und Automatisierungstechnik (GMA) KIT Scientific Publishing. Karlsruhe, Dortmund, .","havard":"P. Meier, V. Lohweg, Content Representation for Neural Style Transfer Algorithms based on Structural Similarity (Best Paper Award), in: 29. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- Und Automatisierungstechnik (GMA) KIT Scientific Publishing, Karlsruhe, Dortmund, , 2019.","ieee":"P. Meier and V. Lohweg, “Content Representation for Neural Style Transfer Algorithms based on Structural Similarity (Best Paper Award),” in 29. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA) KIT Scientific Publishing, 2019.","ama":"Meier P, Lohweg V. Content Representation for Neural Style Transfer Algorithms based on Structural Similarity (Best Paper Award). In: 29. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- Und Automatisierungstechnik (GMA) KIT Scientific Publishing. Karlsruhe, Dortmund, ; 2019."},"department":[{"_id":"DEP5023"}],"author":[{"first_name":"Philip","last_name":"Meier","id":"58460","full_name":"Meier, Philip"},{"full_name":"Lohweg, Volker","id":"1804","first_name":"Volker","last_name":"Lohweg","orcid":"0000-0002-3325-7887"}],"year":2019,"status":"public","type":"conference","date_created":"2019-12-05T07:01:52Z","publication":"29. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA) KIT Scientific Publishing","date_updated":"2023-03-15T13:49:39Z","user_id":"68554","language":[{"iso":"eng"}],"place":"Karlsruhe, Dortmund, ","_id":"2172"},{"language":[{"iso":"eng"}],"_id":"4026","date_created":"2020-11-23T18:45:32Z","type":"conference","date_updated":"2023-03-15T13:49:50Z","user_id":"74004","conference":{"location":"Wroclaw","name":"The 32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems"},"department":[{"_id":"DEP6020"}],"year":2019,"author":[{"first_name":"Martin","id":"52308","full_name":"Griese, Martin","last_name":"Griese"},{"id":"58915","first_name":"Thomas","last_name":"Pawlik","full_name":"Pawlik, Thomas"},{"first_name":"Thomas","id":"46242","full_name":"Schulte, Thomas","last_name":"Schulte"}],"abstract":[{"text":"The control and structural expansion of decentralized energy systems are very challenging due to the volatility of renewable energies and progressive structural changes. For balancing out seasonal fluctuations, conversions into heat or gas in combination with long-term storages are frequently discussed approaches. In context of an optimal conceptual synthesis of such systems, investigations regarding the operation and design require a large time period of at least one year. In order to solve such optimal control problems, an immense calculation time is required. This contribution presents a multistep approach which determines the optimal operation strategy in an iterative way and is capable of reducing the calculation effort. In the first step, a rough optimization incorporating a low modelling depth is performed. Especially in combination with a rough time discretization, dynamic short-term storages (e.g. electrical batteries) can become irrelevant from an optimization point of view. Therefore, the considered system can be virtually reduced by several state and control variables resulting in a significantly reduced computation time. In a second optimization, the optimal control problem is constrained using the results of the previous step. Especially the obtained values for the state of charge of the long-term storage improve significantly the quality of the second optimization. While in the first step, the dynamic programming is utilized to solve the optimal control problem in one instance, the second step uses the mixed integer linear programming to solve multiple short time periods of the optimal control problem in a sequential way. Results are presented on the basis of a simple test scenario where the electrical energy supply of a residential quarter is investigated using real photovoltaic data of one year, a modelled fuel cell system as long-term storage and an electrical battery storage as short-term storage.","lang":"eng"}],"status":"public","title":"Optimized operation of long-term storages considering a scalable modelling depth","citation":{"ufg":"Griese, Martin et. al. (2019): Optimized operation of long-term storages considering a scalable modelling depth, in: .","havard":"M. Griese, T. Pawlik, T. Schulte, Optimized operation of long-term storages considering a scalable modelling depth, in: 2019.","mla":"Griese, Martin, et al. Optimized Operation of Long-Term Storages Considering a Scalable Modelling Depth. 2019.","bjps":"Griese M, Pawlik T and Schulte T (2019) Optimized Operation of Long-Term Storages Considering a Scalable Modelling Depth.","van":"Griese M, Pawlik T, Schulte T. Optimized operation of long-term storages considering a scalable modelling depth. In 2019.","chicago":"Griese, Martin, Thomas Pawlik, and Thomas Schulte. “Optimized Operation of Long-Term Storages Considering a Scalable Modelling Depth,” 2019.","apa":"Griese, M., Pawlik, T., & Schulte, T. (2019). Optimized operation of long-term storages considering a scalable modelling depth. Presented at the The 32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Wroclaw.","chicago-de":"Griese, Martin, Thomas Pawlik und Thomas Schulte. 2019. Optimized operation of long-term storages considering a scalable modelling depth. In: .","din1505-2-1":"Griese, Martin ; Pawlik, Thomas ; Schulte, Thomas: Optimized operation of long-term storages considering a scalable modelling depth. In: , 2019","short":"M. Griese, T. Pawlik, T. Schulte, in: 2019.","ama":"Griese M, Pawlik T, Schulte T. Optimized operation of long-term storages considering a scalable modelling depth. In: ; 2019.","ieee":"M. Griese, T. Pawlik, and T. Schulte, “Optimized operation of long-term storages considering a scalable modelling depth,” presented at the The 32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Wroclaw, 2019."}},{"year":2019,"author":[{"first_name":"Hitesh","id":"71767","last_name":"Dhiman","full_name":"Dhiman, Hitesh"},{"last_name":"Büttner","full_name":"Büttner, Sebastian","id":"61868","first_name":"Sebastian"},{"first_name":"Carsten","full_name":"Röcker, Carsten","id":"61525","last_name":"Röcker"},{"first_name":"Raphael","full_name":"Reisch, Raphael","last_name":"Reisch"}],"main_file_link":[{"url":"https://doi.org/10.1145/3369457.3370919","open_access":"1"}],"department":[{"_id":"DEP5023"}],"conference":{"location":"Perth/Fremantle, WA, Australia","name":"31st Australian Conference on Human-Computer-Interaction (OzCHI'19) ","start_date":"201912-02","end_date":"2019-12-05"},"abstract":[{"lang":"eng","text":"Complexity is a fundamental part of product design and manufacturing today, owing to increased demands for customization and advances in digital design techniques. Assembling and repairing such an enormous variety of components means that workers are cognitively challenged, take longer to search for the relevant information and are prone to making mistakes. Although in recent years deep learning approaches to object recognition have seen rapid advances, the combined potential of deep learning and augmented reality in the industrial domain remains relatively under explored. In this paper we introduce AR-ProMO, a combined hardware/software solution that provides a generalizable assistance system for identifying mistakes during product assembly and repair."}],"status":"public","page":" 518–522","publisher":"ACM","title":"Handling Work Complexity with AR/Deep Learning","citation":{"short":"H. Dhiman, S. Büttner, C. Röcker, R. Reisch, in: Proceedings of the 31st Australian Conference on Human-Computer-Interaction (OzCHI’19) : 2nd Dec.-5th Dec. 2019, Perth/Fremantle, WA, Australia, ACM, 2019, pp. 518–522.","din1505-2-1":"Dhiman, Hitesh ; Büttner, Sebastian ; Röcker, Carsten ; Reisch, Raphael: Handling Work Complexity with AR/Deep Learning. In: Proceedings of the 31st Australian Conference on Human-Computer-Interaction (OzCHI’19) : 2nd Dec.-5th Dec. 2019, Perth/Fremantle, WA, Australia : ACM, 2019, S. 518–522","chicago-de":"Dhiman, Hitesh, Sebastian Büttner, Carsten Röcker und Raphael Reisch. 2019. Handling Work Complexity with AR/Deep Learning. In: Proceedings of the 31st Australian Conference on Human-Computer-Interaction (OzCHI’19) : 2nd Dec.-5th Dec. 2019, Perth/Fremantle, WA, Australia, 518–522. ACM. doi:10.1145/3369457.3370919, .","apa":"Dhiman, H., Büttner, S., Röcker, C., & Reisch, R. (2019). Handling Work Complexity with AR/Deep Learning. In Proceedings of the 31st Australian Conference on Human-Computer-Interaction (OzCHI’19) : 2nd Dec.-5th Dec. 2019, Perth/Fremantle, WA, Australia (pp. 518–522). Perth/Fremantle, WA, Australia: ACM. https://doi.org/10.1145/3369457.3370919","chicago":"Dhiman, Hitesh, Sebastian Büttner, Carsten Röcker, and Raphael Reisch. “Handling Work Complexity with AR/Deep Learning.” In Proceedings of the 31st Australian Conference on Human-Computer-Interaction (OzCHI’19) : 2nd Dec.-5th Dec. 2019, Perth/Fremantle, WA, Australia, 518–522. ACM, 2019. https://doi.org/10.1145/3369457.3370919.","van":"Dhiman H, Büttner S, Röcker C, Reisch R. Handling Work Complexity with AR/Deep Learning. In: Proceedings of the 31st Australian Conference on Human-Computer-Interaction (OzCHI’19) : 2nd Dec-5th Dec 2019, Perth/Fremantle, WA, Australia. ACM; 2019. p. 518–522.","ufg":"Dhiman, Hitesh et. al. (2019): Handling Work Complexity with AR/Deep Learning, in: Proceedings of the 31st Australian Conference on Human-Computer-Interaction (OzCHI’19) : 2nd Dec.-5th Dec. 2019, Perth/Fremantle, WA, Australia, S. 518–522.","havard":"H. Dhiman, S. Büttner, C. Röcker, R. Reisch, Handling Work Complexity with AR/Deep Learning, in: Proceedings of the 31st Australian Conference on Human-Computer-Interaction (OzCHI’19) : 2nd Dec.-5th Dec. 2019, Perth/Fremantle, WA, Australia, ACM, 2019: pp. 518–522.","bjps":"Dhiman H et al. (2019) Handling Work Complexity with AR/Deep Learning. Proceedings of the 31st Australian Conference on Human-Computer-Interaction (OzCHI’19) : 2nd Dec.-5th Dec. 2019, Perth/Fremantle, WA, Australia. ACM, pp. 518–522.","mla":"Dhiman, Hitesh, et al. “Handling Work Complexity with AR/Deep Learning.” Proceedings of the 31st Australian Conference on Human-Computer-Interaction (OzCHI’19) : 2nd Dec.-5th Dec. 2019, Perth/Fremantle, WA, Australia, ACM, 2019, pp. 518–522, doi:10.1145/3369457.3370919.","ieee":"H. Dhiman, S. Büttner, C. Röcker, and R. Reisch, “Handling Work Complexity with AR/Deep Learning,” in Proceedings of the 31st Australian Conference on Human-Computer-Interaction (OzCHI’19) : 2nd Dec.-5th Dec. 2019, Perth/Fremantle, WA, Australia, Perth/Fremantle, WA, Australia, 2019, pp. 518–522.","ama":"Dhiman H, Büttner S, Röcker C, Reisch R. Handling Work Complexity with AR/Deep Learning. In: Proceedings of the 31st Australian Conference on Human-Computer-Interaction (OzCHI’19) : 2nd Dec.-5th Dec. 2019, Perth/Fremantle, WA, Australia. ACM; 2019:518–522. doi:10.1145/3369457.3370919"},"publication_status":"published","oa":"1","keyword":["Augmented Reality","Deep Learning"],"language":[{"iso":"eng"}],"_id":"4102","doi":"10.1145/3369457.3370919","publication":"Proceedings of the 31st Australian Conference on Human-Computer-Interaction (OzCHI'19) : 2nd Dec.-5th Dec. 2019, Perth/Fremantle, WA, Australia","publication_identifier":{"isbn":["978-1-4503-7696-9"]},"type":"conference","date_created":"2020-11-27T10:22:40Z","user_id":"15514","date_updated":"2023-03-15T13:49:50Z"},{"language":[{"iso":"eng"}],"_id":"4104","date_updated":"2023-03-15T13:49:50Z","user_id":"15514","date_created":"2020-11-27T10:22:43Z","type":"journal_article","publication":"Proceedings of the International workshop on Human-Drone Interaction (iHDI'19) as part of the ACM Conference on Human Factors in Computing Systems (CHI '19), pp. 76 - 83","page":"76 - 83","status":"public","department":[{"_id":"DEP5023"}],"conference":{"start_date":"2019-05","end_date":"2019-05","location":"Glasgow, Scotland Uk","name":"CHI '19: CHI Conference on Human Factors in Computing Systems"},"year":2019,"author":[{"full_name":"Büttner, Sebastian","id":"61868","first_name":"Sebastian","last_name":"Büttner"},{"first_name":"Mario","full_name":"Heinz, Mario","id":"68913","last_name":"Heinz"},{"full_name":"Zaitoon, Rami","id":"62713","last_name":"Zaitoon","first_name":"Rami"},{"first_name":"Carsten","last_name":"Röcker","id":"61525","full_name":"Röcker, Carsten"}],"publication_status":"published","citation":{"bjps":"Büttner S et al. (2019) Investigating Users’ Natural Spatial Mapping between Drone Dimensions and One-Hand Drone Controllers. Proceedings of the International workshop on Human-Drone Interaction (iHDI’19) as part of the ACM Conference on Human Factors in Computing Systems (CHI ’19), pp. 76 - 83 76–83.","mla":"Büttner, Sebastian, et al. “Investigating Users’ Natural Spatial Mapping between Drone Dimensions and One-Hand Drone Controllers.” Proceedings of the International Workshop on Human-Drone Interaction (IHDI’19) as Part of the ACM Conference on Human Factors in Computing Systems (CHI ’19), Pp. 76 - 83, 2019, pp. 76–83.","havard":"S. Büttner, M. Heinz, R. Zaitoon, C. Röcker, Investigating Users’ Natural Spatial Mapping between Drone Dimensions and One-Hand Drone Controllers, Proceedings of the International Workshop on Human-Drone Interaction (IHDI’19) as Part of the ACM Conference on Human Factors in Computing Systems (CHI ’19), Pp. 76 - 83. (2019) 76–83.","ufg":"Büttner, Sebastian et. al. (2019): Investigating Users’ Natural Spatial Mapping between Drone Dimensions and One-Hand Drone Controllers, in: Proceedings of the International workshop on Human-Drone Interaction (iHDI’19) as part of the ACM Conference on Human Factors in Computing Systems (CHI ’19), pp. 76 - 83, S. 76–83.","van":"Büttner S, Heinz M, Zaitoon R, Röcker C. Investigating Users’ Natural Spatial Mapping between Drone Dimensions and One-Hand Drone Controllers. Proceedings of the International workshop on Human-Drone Interaction (iHDI’19) as part of the ACM Conference on Human Factors in Computing Systems (CHI ’19), pp 76 - 83. 2019;76–83.","chicago":"Büttner, Sebastian, Mario Heinz, Rami Zaitoon, and Carsten Röcker. “Investigating Users’ Natural Spatial Mapping between Drone Dimensions and One-Hand Drone Controllers.” Proceedings of the International Workshop on Human-Drone Interaction (IHDI’19) as Part of the ACM Conference on Human Factors in Computing Systems (CHI ’19), Pp. 76 - 83, 2019, 76–83.","apa":"Büttner, S., Heinz, M., Zaitoon, R., & Röcker, C. (2019). Investigating Users’ Natural Spatial Mapping between Drone Dimensions and One-Hand Drone Controllers. Proceedings of the International Workshop on Human-Drone Interaction (IHDI’19) as Part of the ACM Conference on Human Factors in Computing Systems (CHI ’19), Pp. 76 - 83, 76–83.","chicago-de":"Büttner, Sebastian, Mario Heinz, Rami Zaitoon und Carsten Röcker. 2019. Investigating Users’ Natural Spatial Mapping between Drone Dimensions and One-Hand Drone Controllers. Proceedings of the International workshop on Human-Drone Interaction (iHDI’19) as part of the ACM Conference on Human Factors in Computing Systems (CHI ’19), pp. 76 - 83: 76–83.","din1505-2-1":"Büttner, Sebastian ; Heinz, Mario ; Zaitoon, Rami ; Röcker, Carsten: Investigating Users’ Natural Spatial Mapping between Drone Dimensions and One-Hand Drone Controllers. In: Proceedings of the International workshop on Human-Drone Interaction (iHDI’19) as part of the ACM Conference on Human Factors in Computing Systems (CHI ’19), pp. 76 - 83 (2019), S. 76–83","short":"S. Büttner, M. Heinz, R. Zaitoon, C. Röcker, Proceedings of the International Workshop on Human-Drone Interaction (IHDI’19) as Part of the ACM Conference on Human Factors in Computing Systems (CHI ’19), Pp. 76 - 83 (2019) 76–83.","ama":"Büttner S, Heinz M, Zaitoon R, Röcker C. Investigating Users’ Natural Spatial Mapping between Drone Dimensions and One-Hand Drone Controllers. Proceedings of the International workshop on Human-Drone Interaction (iHDI’19) as part of the ACM Conference on Human Factors in Computing Systems (CHI ’19), pp 76 - 83. 2019:76-83.","ieee":"S. Büttner, M. Heinz, R. Zaitoon, and C. Röcker, “Investigating Users’ Natural Spatial Mapping between Drone Dimensions and One-Hand Drone Controllers,” Proceedings of the International workshop on Human-Drone Interaction (iHDI’19) as part of the ACM Conference on Human Factors in Computing Systems (CHI ’19), pp. 76 - 83, pp. 76–83, 2019."},"title":"Investigating Users' Natural Spatial Mapping between Drone Dimensions and One-Hand Drone Controllers"},{"publication_status":"published","citation":{"ama":"Bröring A, Büttner S, Heinz M, Röcker C. Smartwatches zur Unterstützung von Produktionsmitarbeitern. In: H. Fischer, S. Hess (Eds.): Mensch und Computer 2019 - Usability Professionals. Gesellschaft für Informatik e.V. Und German UPA e.V., Bonn, Germany, pp. 228 - 235. Bonn: Gesellschaft für Informatik e.V.; 2019:228-235. doi:10.18420/muc2019-up-0324","ieee":"A. Bröring, S. Büttner, M. Heinz, and C. Röcker, “Smartwatches zur Unterstützung von Produktionsmitarbeitern.,” in H. Fischer, S. Hess (Eds.): Mensch und Computer 2019 - Usability Professionals. Gesellschaft für Informatik e.V. Und German UPA e.V., Bonn, Germany, pp. 228 - 235, Hamburg, 2019, pp. 228–235.","short":"A. Bröring, S. Büttner, M. Heinz, C. Röcker, in: H. Fischer, S. Hess (Eds.): Mensch und Computer 2019 - Usability Professionals. Gesellschaft für Informatik e.V. Und German UPA e.V., Bonn, Germany, pp. 228 - 235, Gesellschaft für Informatik e.V., Bonn, 2019, pp. 228–235.","chicago-de":"Bröring, Andre, Sebastian Büttner, Mario Heinz und Carsten Röcker. 2019. Smartwatches zur Unterstützung von Produktionsmitarbeitern. In: H. Fischer, S. Hess (Eds.): Mensch und Computer 2019 - Usability Professionals. Gesellschaft für Informatik e.V. Und German UPA e.V., Bonn, Germany, pp. 228 - 235, 228–235. Bonn: Gesellschaft für Informatik e.V. doi:10.18420/muc2019-up-0324, .","din1505-2-1":"Bröring, Andre ; Büttner, Sebastian ; Heinz, Mario ; Röcker, Carsten: Smartwatches zur Unterstützung von Produktionsmitarbeitern. In: H. Fischer, S. Hess (Eds.): Mensch und Computer 2019 - Usability Professionals. Gesellschaft für Informatik e.V. Und German UPA e.V., Bonn, Germany, pp. 228 - 235. Bonn : Gesellschaft für Informatik e.V., 2019, S. 228–235","van":"Bröring A, Büttner S, Heinz M, Röcker C. Smartwatches zur Unterstützung von Produktionsmitarbeitern. In: H Fischer, S Hess (Eds): Mensch und Computer 2019 - Usability Professionals Gesellschaft für Informatik eV Und German UPA eV, Bonn, Germany, pp 228 - 235. Bonn: Gesellschaft für Informatik e.V.; 2019. p. 228–35.","ufg":"Bröring, Andre et. al. (2019): Smartwatches zur Unterstützung von Produktionsmitarbeitern., in: H. Fischer, S. Hess (Eds.): Mensch und Computer 2019 - Usability Professionals. Gesellschaft für Informatik e.V. Und German UPA e.V., Bonn, Germany, pp. 228 - 235, Bonn, S. 228–235.","mla":"Bröring, Andre, et al. “Smartwatches zur Unterstützung von Produktionsmitarbeitern.” H. Fischer, S. Hess (Eds.): Mensch und Computer 2019 - Usability Professionals. Gesellschaft für Informatik e.V. Und German UPA e.V., Bonn, Germany, pp. 228 - 235, Gesellschaft für Informatik e.V., 2019, pp. 228–35, doi:10.18420/muc2019-up-0324.","havard":"A. Bröring, S. Büttner, M. Heinz, C. Röcker, Smartwatches zur Unterstützung von Produktionsmitarbeitern., in: H. Fischer, S. Hess (Eds.): Mensch und Computer 2019 - Usability Professionals. Gesellschaft für Informatik e.V. Und German UPA e.V., Bonn, Germany, pp. 228 - 235, Gesellschaft für Informatik e.V., Bonn, 2019: pp. 228–235.","bjps":"Bröring A et al. (2019) Smartwatches zur Unterstützung von Produktionsmitarbeitern. H. Fischer, S. Hess (Eds.): Mensch und Computer 2019 - Usability Professionals. Gesellschaft für Informatik e.V. Und German UPA e.V., Bonn, Germany, pp. 228 - 235. Bonn: Gesellschaft für Informatik e.V., pp. 228–235.","apa":"Bröring, A., Büttner, S., Heinz, M., & Röcker, C. (2019). Smartwatches zur Unterstützung von Produktionsmitarbeitern. In H. Fischer, S. Hess (Eds.): Mensch und Computer 2019 - Usability Professionals. Gesellschaft für Informatik e.V. Und German UPA e.V., Bonn, Germany, pp. 228 - 235 (pp. 228–235). Bonn: Gesellschaft für Informatik e.V. https://doi.org/10.18420/muc2019-up-0324","chicago":"Bröring, Andre, Sebastian Büttner, Mario Heinz, and Carsten Röcker. “Smartwatches zur Unterstützung von Produktionsmitarbeitern.” In H. Fischer, S. Hess (Eds.): Mensch und Computer 2019 - Usability Professionals. Gesellschaft für Informatik e.V. Und German UPA e.V., Bonn, Germany, pp. 228 - 235, 228–35. Bonn: Gesellschaft für Informatik e.V., 2019. https://doi.org/10.18420/muc2019-up-0324."},"title":"Smartwatches zur Unterstützung von Produktionsmitarbeitern.","page":" 228 - 235","status":"public","publisher":"Gesellschaft für Informatik e.V.","department":[{"_id":"DEP5023"}],"conference":{"start_date":"2019-09-08","end_date":"2019-09-11","name":"Mensch und Computer 2019","location":"Hamburg"},"year":2019,"author":[{"full_name":"Bröring, Andre","last_name":"Bröring","id":"65130","first_name":"Andre"},{"first_name":"Sebastian","last_name":"Büttner","full_name":"Büttner, Sebastian","id":"61868"},{"last_name":"Heinz","first_name":"Mario","full_name":"Heinz, Mario","id":"68913"},{"full_name":"Röcker, Carsten","id":"61525","first_name":"Carsten","last_name":"Röcker"}],"abstract":[{"text":"Der steigende Automatisierungsgrad in der Produktion führt dazu, dass einzelne Mitarbeiter für eine wachsende Zahl an Maschinen verantwortlich sind. Um Informationen von Maschinen in einer verteilten Industrieumgebung zu Mitarbeitern zu bringen, setzt Phoenix Contact seit kurzer Zeit Smartwatches ein. Im Rahmen dieses Beitrags wird der Entwicklungsprozess sowie das Ergebnis der entsprechenden Smartwatch-Anwendung vorgestellt.Um eine hohe Gebrauchstauglichkeit und die Akzeptanz der neuen Technologie bei der Belegschaft zu erreichen, wurden von Beginn an Nutzer in die Entwicklung der Anwendung einbezogen. Durch Kontextanalysen, Diskussionen von Storyboards sowie die iterative Prototypen-Erstellung und -Evaluierung wurde die Interaktion zwischen Mensch und Produktionsumgebung mit Hilfe von Smartwatches optimiert.","lang":"ger"}],"date_updated":"2023-03-15T13:49:50Z","user_id":"15514","type":"conference","date_created":"2020-11-27T10:22:46Z","publication":"H. Fischer, S. Hess (Eds.): Mensch und Computer 2019 - Usability Professionals. Gesellschaft für Informatik e.V. Und German UPA e.V., Bonn, Germany, pp. 228 - 235","language":[{"iso":"ger"}],"place":"Bonn","doi":"10.18420/muc2019-up-0324","_id":"4106"},{"citation":{"din1505-2-1":"Büttner, Sebastian ; Heinz, Mario ; Zanini, Paulo ; Röcker, Carsten: Investigating Users’ Natural Spatial Mapping between Drone Dimensions and One-Hand Drone Controllers. In: Proceedings of the International workshop on Human-Drone Interaction (iHDI’19) as part of the ACM Conference on Human Factors in Computing Systems (CHI ’19). Glasgow, Scotland, 2019","chicago-de":"Büttner, Sebastian, Mario Heinz, Paulo Zanini und Carsten Röcker. 2019. Investigating Users’ Natural Spatial Mapping between Drone Dimensions and One-Hand Drone Controllers. In: Proceedings of the International workshop on Human-Drone Interaction (iHDI’19) as part of the ACM Conference on Human Factors in Computing Systems (CHI ’19). Glasgow, Scotland.","short":"S. Büttner, M. Heinz, P. Zanini, C. Röcker, in: Proceedings of the International Workshop on Human-Drone Interaction (IHDI’19) as Part of the ACM Conference on Human Factors in Computing Systems (CHI ’19), Glasgow, Scotland, 2019.","ufg":"Büttner, Sebastian et. al. (2019): Investigating Users’ Natural Spatial Mapping between Drone Dimensions and One-Hand Drone Controllers, in: Proceedings of the International workshop on Human-Drone Interaction (iHDI’19) as part of the ACM Conference on Human Factors in Computing Systems (CHI ’19), Glasgow, Scotland.","havard":"S. Büttner, M. Heinz, P. Zanini, C. Röcker, Investigating Users’ Natural Spatial Mapping between Drone Dimensions and One-Hand Drone Controllers, in: Proceedings of the International Workshop on Human-Drone Interaction (IHDI’19) as Part of the ACM Conference on Human Factors in Computing Systems (CHI ’19), Glasgow, Scotland, 2019.","bjps":"Büttner S et al. (2019) Investigating Users’ Natural Spatial Mapping between Drone Dimensions and One-Hand Drone Controllers. Proceedings of the International Workshop on Human-Drone Interaction (IHDI’19) as Part of the ACM Conference on Human Factors in Computing Systems (CHI ’19). Glasgow, Scotland.","mla":"Büttner, Sebastian, et al. “Investigating Users’ Natural Spatial Mapping between Drone Dimensions and One-Hand Drone Controllers.” Proceedings of the International Workshop on Human-Drone Interaction (IHDI’19) as Part of the ACM Conference on Human Factors in Computing Systems (CHI ’19), 2019.","van":"Büttner S, Heinz M, Zanini P, Röcker C. Investigating Users’ Natural Spatial Mapping between Drone Dimensions and One-Hand Drone Controllers. In: Proceedings of the International workshop on Human-Drone Interaction (iHDI’19) as part of the ACM Conference on Human Factors in Computing Systems (CHI ’19). Glasgow, Scotland; 2019.","ama":"Büttner S, Heinz M, Zanini P, Röcker C. Investigating Users’ Natural Spatial Mapping between Drone Dimensions and One-Hand Drone Controllers. In: Proceedings of the International Workshop on Human-Drone Interaction (IHDI’19) as Part of the ACM Conference on Human Factors in Computing Systems (CHI ’19). Glasgow, Scotland; 2019.","chicago":"Büttner, Sebastian, Mario Heinz, Paulo Zanini, and Carsten Röcker. “Investigating Users’ Natural Spatial Mapping between Drone Dimensions and One-Hand Drone Controllers.” In Proceedings of the International Workshop on Human-Drone Interaction (IHDI’19) as Part of the ACM Conference on Human Factors in Computing Systems (CHI ’19). Glasgow, Scotland, 2019.","apa":"Büttner, S., Heinz, M., Zanini, P., & Röcker, C. (2019). Investigating Users’ Natural Spatial Mapping between Drone Dimensions and One-Hand Drone Controllers. In Proceedings of the International workshop on Human-Drone Interaction (iHDI’19) as part of the ACM Conference on Human Factors in Computing Systems (CHI ’19). Glasgow, Scotland.","ieee":"S. Büttner, M. Heinz, P. Zanini, and C. Röcker, “Investigating Users’ Natural Spatial Mapping between Drone Dimensions and One-Hand Drone Controllers,” in Proceedings of the International workshop on Human-Drone Interaction (iHDI’19) as part of the ACM Conference on Human Factors in Computing Systems (CHI ’19), Glasgow, Scotland Uk, 2019."},"publication_status":"published","title":"Investigating Users' Natural Spatial Mapping between Drone Dimensions and One-Hand Drone Controllers","status":"public","abstract":[{"lang":"eng","text":"Using remote control transmitters is a common way to control a drone. For the future, we envision drones that are intuitively controllable with new input devices. One possibility could be the use of one-hand controllers, e.g. 3-D mice. While developing such a device, we investigated the users’ natural spatial mapping between controller and drone dimensions. In this paper we present our insights about this mapping and show why relative position control is an important control concept for novice users."}],"author":[{"first_name":"Sebastian","last_name":"Büttner","id":"61868","full_name":"Büttner, Sebastian"},{"full_name":"Heinz, Mario","first_name":"Mario","id":"68913","last_name":"Heinz"},{"first_name":"Paulo","full_name":"Zanini, Paulo","last_name":"Zanini"},{"first_name":"Carsten","last_name":"Röcker","full_name":"Röcker, Carsten","id":"61525"}],"year":2019,"conference":{"name":"CHI '19: CHI Conference on Human Factors in Computing Systems","location":"Glasgow, Scotland Uk","end_date":"2019-05","start_date":"2019-05"},"department":[{"_id":"DEP5023"}],"user_id":"15514","date_updated":"2023-03-15T13:49:50Z","publication":"Proceedings of the International workshop on Human-Drone Interaction (iHDI'19) as part of the ACM Conference on Human Factors in Computing Systems (CHI '19)","type":"conference","date_created":"2020-11-27T10:22:47Z","_id":"4107","place":"Glasgow, Scotland","language":[{"iso":"eng"}]},{"status":"public","page":"398-401","author":[{"id":"68913","last_name":"Heinz","full_name":"Heinz, Mario","first_name":"Mario"},{"full_name":"Büttner, Sebastian","id":"61868","first_name":"Sebastian","last_name":"Büttner"},{"last_name":"Röcker","first_name":"Carsten","id":"61525","full_name":"Röcker, Carsten"}],"year":2019,"department":[{"_id":"DEP5023"}],"conference":{"name":"PETRA '19: The 12th PErvasive Technologies Related to Assistive Environments Conference","location":" Rhodes Greece ","end_date":"2019-06","start_date":"2019-06"},"abstract":[{"lang":"eng","text":"In this paper, we present a conceptual approach and the Mirst prototype of a mobile training system to provide non-expert users with helpful information about the functionality of complex automated industrial systems. The system uses an augmented reality (AR) tablet application to visualize information about internal processes, sensor states, settings and hidden parts of a production system directly in the Mield of view of a user. The available information can be accessed via four different methods which combine elements of step-by- step tutorials and open exploration. Our prototype aims to support users to better understand automated systems. While such systems will become more complex in future, we believe that augmented reality is a key concept that could help humans to better understand and experience automated systems and its consequences in general. "}],"citation":{"van":"Heinz M, Büttner S, Röcker C. Exploring Training Modes for Industrial Augmented Reality Learning. In: Makedon F, Association for Computing Machinery, New York, NY, United States, editors. Proceedings of the 12th ACM International Conference on Pervasive Technologies Related to Assistive Environments (PETRA’19). New York, NY, USA; 2019. p. 398–401.","bjps":"Heinz M, Büttner S and Röcker C (2019) Exploring Training Modes for Industrial Augmented Reality Learning. In Makedon F and Association for Computing Machinery, New York, NY, United States (eds), Proceedings of the 12th ACM International Conference on Pervasive Technologies Related to Assistive Environments (PETRA’19). New York, NY, USA, pp. 398–401.","havard":"M. Heinz, S. Büttner, C. Röcker, Exploring Training Modes for Industrial Augmented Reality Learning, in: F. Makedon, Association for Computing Machinery, New York, NY, United States (Eds.), Proceedings of the 12th ACM International Conference on Pervasive Technologies Related to Assistive Environments (PETRA’19), New York, NY, USA, 2019: pp. 398–401.","mla":"Heinz, Mario, et al. “Exploring Training Modes for Industrial Augmented Reality Learning.” Proceedings of the 12th ACM International Conference on Pervasive Technologies Related to Assistive Environments (PETRA’19), edited by Fillia Makedon and Association for Computing Machinery, New York, NY, United States, 2019, pp. 398–401, doi:10.1145/3316782.3322753.","ufg":"Heinz, Mario et. al. (2019): Exploring Training Modes for Industrial Augmented Reality Learning, in: Fillia Makedon/ Association for Computing Machinery, New York, NY, United States (Hgg.): Proceedings of the 12th ACM International Conference on Pervasive Technologies Related to Assistive Environments (PETRA’19), New York, NY, USA, S. 398–401.","apa":"Heinz, M., Büttner, S., & Röcker, C. (2019). Exploring Training Modes for Industrial Augmented Reality Learning. In F. Makedon & Association for Computing Machinery, New York, NY, United States (Eds.), Proceedings of the 12th ACM International Conference on Pervasive Technologies Related to Assistive Environments (PETRA’19) (pp. 398–401). New York, NY, USA. https://doi.org/10.1145/3316782.3322753","chicago":"Heinz, Mario, Sebastian Büttner, and Carsten Röcker. “Exploring Training Modes for Industrial Augmented Reality Learning.” In Proceedings of the 12th ACM International Conference on Pervasive Technologies Related to Assistive Environments (PETRA’19), edited by Fillia Makedon and Association for Computing Machinery, New York, NY, United States, 398–401. New York, NY, USA, 2019. https://doi.org/10.1145/3316782.3322753.","short":"M. Heinz, S. Büttner, C. Röcker, in: F. Makedon, Association for Computing Machinery, New York, NY, United States (Eds.), Proceedings of the 12th ACM International Conference on Pervasive Technologies Related to Assistive Environments (PETRA’19), New York, NY, USA, 2019, pp. 398–401.","chicago-de":"Heinz, Mario, Sebastian Büttner und Carsten Röcker. 2019. Exploring Training Modes for Industrial Augmented Reality Learning. In: Proceedings of the 12th ACM International Conference on Pervasive Technologies Related to Assistive Environments (PETRA’19), hg. von Fillia Makedon und Association for Computing Machinery, New York, NY, United States, 398–401. New York, NY, USA. doi:10.1145/3316782.3322753, .","din1505-2-1":"Heinz, Mario ; Büttner, Sebastian ; Röcker, Carsten: Exploring Training Modes for Industrial Augmented Reality Learning. In: Makedon, F. ; Association for Computing Machinery, New York, NY, United States (Hrsg.): Proceedings of the 12th ACM International Conference on Pervasive Technologies Related to Assistive Environments (PETRA’19). New York, NY, USA, 2019, S. 398–401","ama":"Heinz M, Büttner S, Röcker C. Exploring Training Modes for Industrial Augmented Reality Learning. In: Makedon F, Association for Computing Machinery, New York, NY, United States, eds. Proceedings of the 12th ACM International Conference on Pervasive Technologies Related to Assistive Environments (PETRA’19). New York, NY, USA; 2019:398-401. doi:10.1145/3316782.3322753","ieee":"M. Heinz, S. Büttner, and C. Röcker, “Exploring Training Modes for Industrial Augmented Reality Learning,” in Proceedings of the 12th ACM International Conference on Pervasive Technologies Related to Assistive Environments (PETRA’19), Rhodes Greece , 2019, pp. 398–401."},"publication_status":"published","title":"Exploring Training Modes for Industrial Augmented Reality Learning","place":"New York, NY, USA","language":[{"iso":"eng"}],"_id":"4108","doi":"10.1145/3316782.3322753","user_id":"15514","date_updated":"2023-03-15T13:49:50Z","corporate_editor":[" Association for Computing Machinery, New York, NY, United States"],"editor":[{"last_name":"Makedon","full_name":"Makedon, Fillia","first_name":"Fillia"}],"publication_identifier":{"eisbn":["978-1-4503-6232-0"]},"publication":"Proceedings of the 12th ACM International Conference on Pervasive Technologies Related to Assistive Environments (PETRA'19)","type":"conference","date_created":"2020-11-27T10:22:49Z"},{"title":"Verwendung von Augmented Reality im Industrieumfeld","citation":{"ieee":"J.-P. Töberg, R. Rohde, S. Büttner, and C. Röcker, “Verwendung von Augmented Reality im Industrieumfeld,” in Mensch und Computer 2019 - Usability Professionals, Hamburg, 2019.","apa":"Töberg, J.-P., Rohde, R., Büttner, S., & Röcker, C. (2019). Verwendung von Augmented Reality im Industrieumfeld. In Mensch und Computer 2019 - Usability Professionals. Bonn: Gesellschaft für Informatik e.V. Und German UPA e.V. https://doi.org/10.18420/muc2019-up-0336","chicago":"Töberg, Jan-Philipp, Raphael Rohde, Sebastian Büttner, and Carsten Röcker. “Verwendung von Augmented Reality im Industrieumfeld.” In Mensch und Computer 2019 - Usability Professionals. Bonn: Gesellschaft für Informatik e.V. Und German UPA e.V., 2019. https://doi.org/10.18420/muc2019-up-0336.","ama":"Töberg J-P, Rohde R, Büttner S, Röcker C. Verwendung von Augmented Reality im Industrieumfeld. In: Mensch und Computer 2019 - Usability Professionals. Bonn: Gesellschaft für Informatik e.V. Und German UPA e.V.; 2019. doi:10.18420/muc2019-up-0336","van":"Töberg J-P, Rohde R, Büttner S, Röcker C. Verwendung von Augmented Reality im Industrieumfeld. In: Mensch und Computer 2019 - Usability Professionals. Bonn: Gesellschaft für Informatik e.V. Und German UPA e.V.; 2019.","mla":"Töberg, Jan-Philipp, et al. “Verwendung von Augmented Reality im Industrieumfeld.” Mensch und Computer 2019 - Usability Professionals, Gesellschaft für Informatik e.V. Und German UPA e.V., 2019, doi:10.18420/muc2019-up-0336.","havard":"J.-P. Töberg, R. Rohde, S. Büttner, C. Röcker, Verwendung von Augmented Reality im Industrieumfeld, in: Mensch und Computer 2019 - Usability Professionals, Gesellschaft für Informatik e.V. Und German UPA e.V., Bonn, 2019.","bjps":"Töberg J-P et al. (2019) Verwendung von Augmented Reality im Industrieumfeld. Mensch und Computer 2019 - Usability Professionals. Bonn: Gesellschaft für Informatik e.V. Und German UPA e.V.","ufg":"Töberg, Jan-Philipp et. al. (2019): Verwendung von Augmented Reality im Industrieumfeld, in: Mensch und Computer 2019 - Usability Professionals, Bonn.","short":"J.-P. Töberg, R. Rohde, S. Büttner, C. Röcker, in: Mensch und Computer 2019 - Usability Professionals, Gesellschaft für Informatik e.V. Und German UPA e.V., Bonn, 2019.","chicago-de":"Töberg, Jan-Philipp, Raphael Rohde, Sebastian Büttner und Carsten Röcker. 2019. Verwendung von Augmented Reality im Industrieumfeld. In: Mensch und Computer 2019 - Usability Professionals. Bonn: Gesellschaft für Informatik e.V. Und German UPA e.V. doi:10.18420/muc2019-up-0336, .","din1505-2-1":"Töberg, Jan-Philipp ; Rohde, Raphael ; Büttner, Sebastian ; Röcker, Carsten: Verwendung von Augmented Reality im Industrieumfeld. In: Mensch und Computer 2019 - Usability Professionals. Bonn : Gesellschaft für Informatik e.V. Und German UPA e.V., 2019"},"publication_status":"published","author":[{"first_name":"Jan-Philipp","full_name":"Töberg, Jan-Philipp","last_name":"Töberg","id":"71509"},{"first_name":"Raphael","last_name":"Rohde","full_name":"Rohde, Raphael"},{"full_name":"Büttner, Sebastian","first_name":"Sebastian","id":"61868","last_name":"Büttner"},{"last_name":"Röcker","first_name":"Carsten","full_name":"Röcker, Carsten","id":"61525"}],"main_file_link":[{"url":"https://dl.gi.de/bitstream/handle/20.500.12116/24522/muc2019-up-0336.pdf?sequence=1&isAllowed=y","open_access":"1"}],"year":2019,"department":[{"_id":"DEP5023"}],"conference":{"start_date":"2019-09-08","end_date":"2019-09-11","location":"Hamburg","name":"Mensch und Computer 2019"},"abstract":[{"text":"Seit dem Verkaufsstart von Microsofts Augmented-Reality-Brille HoloLens hat Augmented Reality (AR) den Massenmarkt er- reicht. So setzen beispielsweise Museen auf die erweiterte Realität zur digitalen Erweiterung ihrer physischen Ausstellungsstücke. Im Kontext von Industrie 4.0 wird eine Vielzahl verschiede- ner Anwendungsszenarien diskutiert. Um das Potential von AR zu evaluieren, wurde bei Phoenix Contact ein personalloser Werksrundgang mittels AR-Brille durch ein Produktionsgebäude entwickelt. Die HoloLens-Implementierung erfolgte über die Spiele-Engine Unity und nutzt markerbasiertes Tracking für die Darstellung von Inhalten. Dabei werden im Gebäude unter- schiedliche Hotspots definiert, welche distanzabhängig getrackt werden können, um den Nutzer mit Hilfe von 3D-Objekten, Animationen und Texten Informationen zu liefern. In diesem Beitrag präsentieren wir die konzeptionelle und technische Realisierung der Anwendung. ","lang":"ger"}],"status":"public","publisher":"Gesellschaft für Informatik e.V. Und German UPA e.V.","publication":"Mensch und Computer 2019 - Usability Professionals","type":"conference","date_created":"2020-11-27T10:22:50Z","user_id":"15514","date_updated":"2023-03-15T13:49:50Z","oa":"1","place":"Bonn","language":[{"iso":"ger"}],"_id":"4109","doi":"10.18420/muc2019-up-0336"},{"publication":"Mensch und Computer 2019 - Usability Professionals","date_created":"2020-11-27T10:22:51Z","type":"conference","user_id":"15514","date_updated":"2023-03-15T13:49:50Z","oa":"1","place":"Bonn","language":[{"iso":"ger"}],"_id":"4110","doi":"10.18420/muc2019-up-0324","title":"Smartwatches zur Unterstüzung von Produktionsmitarbeitern ","citation":{"ama":"Bröring A, Fast A, Büttner S, Heinz M, Röcker C. Smartwatches zur Unterstüzung von Produktionsmitarbeitern . In: Mensch und Computer 2019 - Usability Professionals. Bonn: Gesellschaft für Informatik e.V. Und German UPA e.V.; 2019. doi:10.18420/muc2019-up-0324","ieee":"A. Bröring, A. Fast, S. Büttner, M. Heinz, and C. Röcker, “Smartwatches zur Unterstüzung von Produktionsmitarbeitern ,” in Mensch und Computer 2019 - Usability Professionals, Hamburg, 2019.","ufg":"Bröring, Andre et. al. (2019): Smartwatches zur Unterstüzung von Produktionsmitarbeitern , in: Mensch und Computer 2019 - Usability Professionals, Bonn.","mla":"Bröring, Andre, et al. “Smartwatches zur Unterstüzung von Produktionsmitarbeitern .” Mensch und Computer 2019 - Usability Professionals, Gesellschaft für Informatik e.V. Und German UPA e.V., 2019, doi:10.18420/muc2019-up-0324.","bjps":"Bröring A et al. (2019) Smartwatches zur Unterstüzung von Produktionsmitarbeitern . Mensch und Computer 2019 - Usability Professionals. Bonn: Gesellschaft für Informatik e.V. Und German UPA e.V.","havard":"A. Bröring, A. Fast, S. Büttner, M. Heinz, C. Röcker, Smartwatches zur Unterstüzung von Produktionsmitarbeitern , in: Mensch und Computer 2019 - Usability Professionals, Gesellschaft für Informatik e.V. Und German UPA e.V., Bonn, 2019.","van":"Bröring A, Fast A, Büttner S, Heinz M, Röcker C. Smartwatches zur Unterstüzung von Produktionsmitarbeitern . In: Mensch und Computer 2019 - Usability Professionals. Bonn: Gesellschaft für Informatik e.V. Und German UPA e.V.; 2019.","chicago":"Bröring, Andre, Arno Fast, Sebastian Büttner, Mario Heinz, and Carsten Röcker. “Smartwatches zur Unterstüzung von Produktionsmitarbeitern .” In Mensch und Computer 2019 - Usability Professionals. Bonn: Gesellschaft für Informatik e.V. Und German UPA e.V., 2019. https://doi.org/10.18420/muc2019-up-0324.","apa":"Bröring, A., Fast, A., Büttner, S., Heinz, M., & Röcker, C. (2019). Smartwatches zur Unterstüzung von Produktionsmitarbeitern . In Mensch und Computer 2019 - Usability Professionals. Bonn: Gesellschaft für Informatik e.V. Und German UPA e.V. https://doi.org/10.18420/muc2019-up-0324","chicago-de":"Bröring, Andre, Arno Fast, Sebastian Büttner, Mario Heinz und Carsten Röcker. 2019. Smartwatches zur Unterstüzung von Produktionsmitarbeitern . In: Mensch und Computer 2019 - Usability Professionals. Bonn: Gesellschaft für Informatik e.V. Und German UPA e.V. doi:10.18420/muc2019-up-0324, .","din1505-2-1":"Bröring, Andre ; Fast, Arno ; Büttner, Sebastian ; Heinz, Mario ; Röcker, Carsten: Smartwatches zur Unterstüzung von Produktionsmitarbeitern . In: Mensch und Computer 2019 - Usability Professionals. Bonn : Gesellschaft für Informatik e.V. Und German UPA e.V., 2019","short":"A. Bröring, A. Fast, S. Büttner, M. Heinz, C. Röcker, in: Mensch und Computer 2019 - Usability Professionals, Gesellschaft für Informatik e.V. Und German UPA e.V., Bonn, 2019."},"publication_status":"published","year":2019,"main_file_link":[{"open_access":"1","url":"https://dl.gi.de/bitstream/handle/20.500.12116/24520/muc2019-up-0324.pdf?sequence=1&isAllowed=y"}],"author":[{"first_name":"Andre","last_name":"Bröring","id":"65130","full_name":"Bröring, Andre"},{"last_name":"Fast","first_name":"Arno","full_name":"Fast, Arno"},{"first_name":"Sebastian","id":"61868","full_name":"Büttner, Sebastian","last_name":"Büttner"},{"id":"68913","last_name":"Heinz","first_name":"Mario","full_name":"Heinz, Mario"},{"id":"61525","full_name":"Röcker, Carsten","last_name":"Röcker","first_name":"Carsten"}],"conference":{"end_date":"2019-09-11","start_date":"2019-09-08","location":"Hamburg","name":"Mensch und Computer 2019"},"department":[{"_id":"DEP5023"}],"abstract":[{"lang":"ger","text":"Der steigende Automatisierungsgrad in der Produktion führt dazu, dass einzelne Mitarbeiter für eine wachsende Zahl an Maschinen verantwortlich sind. Um Informationen von Maschinen in einer verteilten Industrieumgebung zu Mitarbeitern zu bringen, setzt Phoenix Contact seit kurzer Zeit Smartwatches ein. Im Rahmen dieses Beitrags wird der Entwicklungsprozess sowie das Ergebnis der entsprechenden Smartwatch-Anwendung vorgestellt. Um eine hohe Gebrauchstauglichkeit und die Akzeptanz der neuen Technologie bei der Belegschaft zu erreichen, wurden von Beginn an Nutzer in die Entwicklung der Anwendung einbezogen. Durch Kontextanalysen, Diskussionen von Storyboards sowie die iterative Prototypen-Erstellung und -Evaluierung wurde die Interaktion zwischen Mensch und Produktionsumgebung mit Hilfe von Smartwatches optimiert. "}],"status":"public","publisher":"Gesellschaft für Informatik e.V. Und German UPA e.V."},{"conference":{"end_date":"2019-05-09","start_date":"2019-05-04","location":"Glasgow","name":"37. CHI (Conference on Human Factors in Computing Systems) 2019"},"department":[{"_id":"DEP5023"}],"year":2019,"author":[{"first_name":"Mario","full_name":"Heinz, Mario","last_name":"Heinz","id":"68913"},{"first_name":"Sebastian","last_name":"Büttner","id":"61868","full_name":"Büttner, Sebastian"},{"first_name":"Carsten","id":"61525","full_name":"Röcker, Carsten","last_name":"Röcker"}],"publisher":"ACM","status":"public","title":"Exploring Augmented Reality Training for Automated Systems","publication_status":"published","citation":{"chicago":"Heinz, Mario, Sebastian Büttner, and Carsten Röcker. “Exploring Augmented Reality Training for Automated Systems.” In Workshop “Everyday Automation Experience” at ACM CHI Conference on Human Factors in Computing Systems (CHI 2019). Glasgow, UK: ACM, 2019.","apa":"Heinz, M., Büttner, S., & Röcker, C. (2019). Exploring Augmented Reality Training for Automated Systems. In Workshop “Everyday Automation Experience” at ACM CHI Conference on Human Factors in Computing Systems (CHI 2019). Glasgow, UK: ACM.","havard":"M. Heinz, S. Büttner, C. Röcker, Exploring Augmented Reality Training for Automated Systems, in: Workshop “Everyday Automation Experience” at ACM CHI Conference on Human Factors in Computing Systems (CHI 2019), ACM, Glasgow, UK, 2019.","mla":"Heinz, Mario, et al. “Exploring Augmented Reality Training for Automated Systems.” Workshop “Everyday Automation Experience” at ACM CHI Conference on Human Factors in Computing Systems (CHI 2019), ACM, 2019.","bjps":"Heinz M, Büttner S and Röcker C (2019) Exploring Augmented Reality Training for Automated Systems. Workshop ‘Everyday Automation Experience’ at ACM CHI Conference on Human Factors in Computing Systems (CHI 2019). Glasgow, UK: ACM.","ufg":"Heinz, Mario et. al. (2019): Exploring Augmented Reality Training for Automated Systems, in: Workshop „Everyday Automation Experience“ at ACM CHI Conference on Human Factors in Computing Systems (CHI 2019), Glasgow, UK.","van":"Heinz M, Büttner S, Röcker C. Exploring Augmented Reality Training for Automated Systems. In: Workshop “Everyday Automation Experience” at ACM CHI Conference on Human Factors in Computing Systems (CHI 2019). Glasgow, UK: ACM; 2019.","chicago-de":"Heinz, Mario, Sebastian Büttner und Carsten Röcker. 2019. Exploring Augmented Reality Training for Automated Systems. In: Workshop „Everyday Automation Experience“ at ACM CHI Conference on Human Factors in Computing Systems (CHI 2019). Glasgow, UK: ACM.","din1505-2-1":"Heinz, Mario ; Büttner, Sebastian ; Röcker, Carsten: Exploring Augmented Reality Training for Automated Systems. In: Workshop „Everyday Automation Experience“ at ACM CHI Conference on Human Factors in Computing Systems (CHI 2019). Glasgow, UK : ACM, 2019","short":"M. Heinz, S. Büttner, C. Röcker, in: Workshop “Everyday Automation Experience” at ACM CHI Conference on Human Factors in Computing Systems (CHI 2019), ACM, Glasgow, UK, 2019.","ieee":"M. Heinz, S. Büttner, and C. Röcker, “Exploring Augmented Reality Training for Automated Systems,” in Workshop “Everyday Automation Experience” at ACM CHI Conference on Human Factors in Computing Systems (CHI 2019), Glasgow, 2019.","ama":"Heinz M, Büttner S, Röcker C. Exploring Augmented Reality Training for Automated Systems. In: Workshop “Everyday Automation Experience” at ACM CHI Conference on Human Factors in Computing Systems (CHI 2019). Glasgow, UK: ACM; 2019."},"_id":"4111","language":[{"iso":"eng"}],"place":"Glasgow, UK","date_created":"2020-11-27T10:22:53Z","type":"conference","publication":"Workshop \"Everyday Automation Experience\" at ACM CHI Conference on Human Factors in Computing Systems (CHI 2019)","date_updated":"2023-03-15T13:49:50Z","user_id":"15514"},{"title":"Systemkonzept für ein industrielles Gleichspannungsnetz","citation":{"van":"Puls S, Austermann J, Borcherding H. Systemkonzept für ein industrielles Gleichspannungsnetz. Bauer B, Wittenberg C, editors. AALE 2019 : Autonome und intelligente Systeme in der Automatisierungstechnik 16. Fachkonferenz. Heilbronn: VDE-Verlag; 2019.","ufg":"Puls, S. et. al. (2019): Systemkonzept für ein industrielles Gleichspannungsnetz, Heilbronn.","havard":"S. Puls, J. Austermann, H. Borcherding, Systemkonzept für ein industrielles Gleichspannungsnetz, VDE-Verlag, Heilbronn, 2019.","mla":"Puls, S., et al. “Systemkonzept Für Ein Industrielles Gleichspannungsnetz.” AALE 2019 : Autonome Und Intelligente Systeme in Der Automatisierungstechnik 16. Fachkonferenz, edited by Benedict Bauer and Carsten Wittenberg, VDE-Verlag, 2019, pp. 153–60.","bjps":"Puls S, Austermann J and Borcherding H (2019) Systemkonzept Für Ein Industrielles Gleichspannungsnetz, Bauer B and Wittenberg C (eds). Heilbronn: VDE-Verlag.","apa":"Puls, S., Austermann, J., & Borcherding, H. (2019). Systemkonzept für ein industrielles Gleichspannungsnetz. (B. Bauer & C. Wittenberg, Eds.), AALE 2019 : Autonome und intelligente Systeme in der Automatisierungstechnik 16. Fachkonferenz (pp. 153–160). Heilbronn: VDE-Verlag.","chicago":"Puls, S., Johann Austermann, and Holger Borcherding. Systemkonzept Für Ein Industrielles Gleichspannungsnetz. Edited by Benedict Bauer and Carsten Wittenberg. AALE 2019 : Autonome Und Intelligente Systeme in Der Automatisierungstechnik 16. Fachkonferenz. Heilbronn: VDE-Verlag, 2019.","short":"S. Puls, J. Austermann, H. Borcherding, Systemkonzept Für Ein Industrielles Gleichspannungsnetz, VDE-Verlag, Heilbronn, 2019.","chicago-de":"Puls, S., Johann Austermann und Holger Borcherding. 2019. Systemkonzept für ein industrielles Gleichspannungsnetz. Hg. von Benedict Bauer und Carsten Wittenberg. AALE 2019 : Autonome und intelligente Systeme in der Automatisierungstechnik 16. Fachkonferenz. Heilbronn: VDE-Verlag.","din1505-2-1":"Puls, S. ; Austermann, Johann ; Borcherding, Holger ; Bauer, B. ; Wittenberg, C. (Hrsg.): Systemkonzept für ein industrielles Gleichspannungsnetz. Heilbronn : VDE-Verlag, 2019","ama":"Puls S, Austermann J, Borcherding H. Systemkonzept Für Ein Industrielles Gleichspannungsnetz. (Bauer B, Wittenberg C, eds.). Heilbronn: VDE-Verlag; 2019:153-160.","ieee":"S. Puls, J. Austermann, and H. Borcherding, Systemkonzept für ein industrielles Gleichspannungsnetz. Heilbronn: VDE-Verlag, 2019, pp. 153–160."},"publication_status":"published","year":2019,"author":[{"full_name":"Puls, S.","first_name":"S.","last_name":"Puls"},{"id":"42114","full_name":"Austermann, Johann","first_name":"Johann","last_name":"Austermann"},{"first_name":"Holger","full_name":"Borcherding, Holger","last_name":"Borcherding","id":"1693"}],"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"conference":{"name":"Autonome und intelligente Systeme in der Automatisierungstechnik 16. Fachkonferenz","location":"Heilbronn","start_date":"2019-02-28","end_date":"2019-03-01"},"status":"public","page":"153 - 160","publisher":"VDE-Verlag","publication_identifier":{"eisbn":["978-3-8007-4861-7"],"isbn":["978-3-8007-4860-0"]},"publication":"AALE 2019 : Autonome und intelligente Systeme in der Automatisierungstechnik 16. Fachkonferenz","date_created":"2020-12-10T12:57:38Z","type":"conference_editor_article","user_id":"64800","related_material":{"link":[{"relation":"confirmation","url":"https://www.vde-verlag.de/proceedings-de/564860022.html"}]},"date_updated":"2023-03-15T13:49:51Z","editor":[{"first_name":"Benedict","full_name":"Bauer, Benedict","last_name":"Bauer"},{"first_name":"Carsten","last_name":"Wittenberg","full_name":"Wittenberg, Carsten"}],"place":"Heilbronn","language":[{"iso":"eng"}],"_id":"4246"},{"_id":"4247","place":"Heilbronn","language":[{"iso":"ger"}],"editor":[{"last_name":"Bauer","first_name":"Benedict","full_name":"Bauer, Benedict"},{"full_name":"Wittenberg, Carsten","last_name":"Wittenberg","first_name":"Carsten"}],"user_id":"83781","date_updated":"2024-05-14T13:00:53Z","publication_identifier":{"isbn":["978-3-8007-4860-0"],"eisbn":["978-3-8007-4861-7"]},"publication":"AALE 2019 : Autonome und intelligente Systeme in der Automatisierungstechnik 16. Fachkonferenz","type":"conference","date_created":"2020-12-10T12:57:38Z","publisher":"VDE-Verlag","status":"public","page":"231 - 234","year":"2019","author":[{"last_name":"Mambetow","first_name":"Artur","full_name":"Mambetow, Artur","id":"51936"},{"last_name":"Vogt","full_name":"Vogt, Marvin","id":"74593","first_name":"Marvin"},{"id":"62157","first_name":"Benjamin","full_name":"Jerwan, Benjamin","last_name":"Jerwan"},{"first_name":"Holger","last_name":"Borcherding","id":"1693","full_name":"Borcherding, Holger"}],"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"conference":{"location":"Heilbronn","name":"Autonome und intelligente Systeme in der Automatisierungstechnik 16. Fachkonferenz","start_date":"2019-02-28","end_date":"2019-03-01"},"citation":{"van":"Mambetow A, Vogt M, Jerwan B, Borcherding H. Hardware eines Bidirektionalen Gleichstromstellers für Praktikumsanwendungen mit Implementierungsmöglichkeit von Regelmodellen aus Matlab/Simulink. In: Bauer B, Wittenberg C, editors. AALE 2019 : Autonome und intelligente Systeme in der Automatisierungstechnik 16 Fachkonferenz. Heilbronn: VDE-Verlag; 2019. p. 231–4.","mla":"Mambetow, Artur, et al. “Hardware eines Bidirektionalen Gleichstromstellers für Praktikumsanwendungen mit Implementierungsmöglichkeit von Regelmodellen aus Matlab/Simulink.” AALE 2019 : Autonome und intelligente Systeme in der Automatisierungstechnik 16. Fachkonferenz, edited by Benedict Bauer and Carsten Wittenberg, VDE-Verlag, 2019, pp. 231–34.","bjps":"Mambetow A et al. (2019) Hardware eines Bidirektionalen Gleichstromstellers für Praktikumsanwendungen mit Implementierungsmöglichkeit von Regelmodellen aus Matlab/Simulink. In Bauer B and Wittenberg C (eds), AALE 2019 : Autonome und intelligente Systeme in der Automatisierungstechnik 16. Fachkonferenz. Heilbronn: VDE-Verlag, pp. 231–234.","havard":"A. Mambetow, M. Vogt, B. Jerwan, H. Borcherding, Hardware eines Bidirektionalen Gleichstromstellers für Praktikumsanwendungen mit Implementierungsmöglichkeit von Regelmodellen aus Matlab/Simulink, in: B. Bauer, C. Wittenberg (Eds.), AALE 2019 : Autonome und intelligente Systeme in der Automatisierungstechnik 16. Fachkonferenz, VDE-Verlag, Heilbronn, 2019: pp. 231–234.","ufg":"Mambetow, Artur u. a.: Hardware eines Bidirektionalen Gleichstromstellers für Praktikumsanwendungen mit Implementierungsmöglichkeit von Regelmodellen aus Matlab/Simulink, in: Bauer, Benedict/Wittenberg, Carsten (Hgg.): AALE 2019 : Autonome und intelligente Systeme in der Automatisierungstechnik 16. Fachkonferenz, Heilbronn 2019, S. 231–234.","apa":"Mambetow, A., Vogt, M., Jerwan, B., & Borcherding, H. (2019). Hardware eines Bidirektionalen Gleichstromstellers für Praktikumsanwendungen mit Implementierungsmöglichkeit von Regelmodellen aus Matlab/Simulink. In B. Bauer & C. Wittenberg (Eds.), AALE 2019 : Autonome und intelligente Systeme in der Automatisierungstechnik 16. Fachkonferenz (pp. 231–234). VDE-Verlag.","chicago":"Mambetow, Artur, Marvin Vogt, Benjamin Jerwan, and Holger Borcherding. “Hardware eines Bidirektionalen Gleichstromstellers für Praktikumsanwendungen mit Implementierungsmöglichkeit von Regelmodellen aus Matlab/Simulink.” In AALE 2019 : Autonome und intelligente Systeme in der Automatisierungstechnik 16. Fachkonferenz, edited by Benedict Bauer and Carsten Wittenberg, 231–34. Heilbronn: VDE-Verlag, 2019.","short":"A. Mambetow, M. Vogt, B. Jerwan, H. Borcherding, in: B. Bauer, C. Wittenberg (Eds.), AALE 2019 : Autonome und intelligente Systeme in der Automatisierungstechnik 16. Fachkonferenz, VDE-Verlag, Heilbronn, 2019, pp. 231–234.","chicago-de":"Mambetow, Artur, Marvin Vogt, Benjamin Jerwan und Holger Borcherding. 2019. Hardware eines Bidirektionalen Gleichstromstellers für Praktikumsanwendungen mit Implementierungsmöglichkeit von Regelmodellen aus Matlab/Simulink. In: AALE 2019 : Autonome und intelligente Systeme in der Automatisierungstechnik 16. Fachkonferenz, hg. von Benedict Bauer und Carsten Wittenberg, 231–234. Heilbronn: VDE-Verlag.","din1505-2-1":"Mambetow, Artur ; Vogt, Marvin ; Jerwan, Benjamin ; Borcherding, Holger: Hardware eines Bidirektionalen Gleichstromstellers für Praktikumsanwendungen mit Implementierungsmöglichkeit von Regelmodellen aus Matlab/Simulink. In: Bauer, B. ; Wittenberg, C. (Hrsg.): AALE 2019 : Autonome und intelligente Systeme in der Automatisierungstechnik 16. Fachkonferenz. Heilbronn : VDE-Verlag, 2019, S. 231–234","ama":"Mambetow A, Vogt M, Jerwan B, Borcherding H. Hardware eines Bidirektionalen Gleichstromstellers für Praktikumsanwendungen mit Implementierungsmöglichkeit von Regelmodellen aus Matlab/Simulink. In: Bauer B, Wittenberg C, eds. AALE 2019 : Autonome und intelligente Systeme in der Automatisierungstechnik 16. Fachkonferenz. VDE-Verlag; 2019:231-234.","ieee":"A. Mambetow, M. Vogt, B. Jerwan, and H. Borcherding, “Hardware eines Bidirektionalen Gleichstromstellers für Praktikumsanwendungen mit Implementierungsmöglichkeit von Regelmodellen aus Matlab/Simulink,” in AALE 2019 : Autonome und intelligente Systeme in der Automatisierungstechnik 16. Fachkonferenz, Heilbronn, 2019, pp. 231–234."},"publication_status":"published","title":"Hardware eines Bidirektionalen Gleichstromstellers für Praktikumsanwendungen mit Implementierungsmöglichkeit von Regelmodellen aus Matlab/Simulink"},{"title":"The Influence on Drive Inverters under the Effects of Short Circuits in an Open Industrial DC grid","citation":{"chicago":"Puls, Simon, Johann Austermann, and Holger Borcherding. The Influence on Drive Inverters under the Effects of Short Circuits in an Open Industrial DC Grid. EPE 19 ECCE Europe : CFP19850-USB. Berlin: IEEE, 2019. https://doi.org/10.23919/EPE.2019.8915437.","apa":"Puls, S., Austermann, J., & Borcherding, H. (2019). The Influence on Drive Inverters under the Effects of Short Circuits in an Open Industrial DC grid. EPE 19 ECCE Europe : CFP19850-USB. Berlin: IEEE. https://doi.org/10.23919/EPE.2019.8915437","havard":"S. Puls, J. Austermann, H. Borcherding, The Influence on Drive Inverters under the Effects of Short Circuits in an Open Industrial DC grid, IEEE, Berlin, 2019.","mla":"Puls, Simon, et al. “The Influence on Drive Inverters under the Effects of Short Circuits in an Open Industrial DC Grid.” EPE 19 ECCE Europe : CFP19850-USB, IEEE, 2019, doi:10.23919/EPE.2019.8915437.","bjps":"Puls S, Austermann J and Borcherding H (2019) The Influence on Drive Inverters under the Effects of Short Circuits in an Open Industrial DC Grid. Berlin: IEEE.","ufg":"Puls, Simon et. al. (2019): The Influence on Drive Inverters under the Effects of Short Circuits in an Open Industrial DC grid, Berlin.","van":"Puls S, Austermann J, Borcherding H. The Influence on Drive Inverters under the Effects of Short Circuits in an Open Industrial DC grid. EPE 19 ECCE Europe : CFP19850-USB. Berlin: IEEE; 2019.","din1505-2-1":"Puls, Simon ; Austermann, Johann ; Borcherding, Holger: The Influence on Drive Inverters under the Effects of Short Circuits in an Open Industrial DC grid. Berlin : IEEE, 2019","chicago-de":"Puls, Simon, Johann Austermann und Holger Borcherding. 2019. The Influence on Drive Inverters under the Effects of Short Circuits in an Open Industrial DC grid. EPE 19 ECCE Europe : CFP19850-USB. Berlin: IEEE. doi:10.23919/EPE.2019.8915437, .","short":"S. Puls, J. Austermann, H. Borcherding, The Influence on Drive Inverters under the Effects of Short Circuits in an Open Industrial DC Grid, IEEE, Berlin, 2019.","ieee":"S. Puls, J. Austermann, and H. Borcherding, The Influence on Drive Inverters under the Effects of Short Circuits in an Open Industrial DC grid. Berlin: IEEE, 2019.","ama":"Puls S, Austermann J, Borcherding H. The Influence on Drive Inverters under the Effects of Short Circuits in an Open Industrial DC Grid. Berlin: IEEE; 2019. doi:10.23919/EPE.2019.8915437"},"publication_status":"published","author":[{"first_name":"Simon","full_name":"Puls, Simon","last_name":"Puls"},{"id":"42114","last_name":"Austermann","full_name":"Austermann, Johann","first_name":"Johann"},{"full_name":"Borcherding, Holger","first_name":"Holger","last_name":"Borcherding","id":"1693"}],"year":2019,"conference":{"name":"21st European Conference on Power Electronics and Applications - EPE’19 ECCE – EUROPE","location":"Genova, Italy","end_date":"2019-09-05","start_date":"2019-09-02"},"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"status":"public","publisher":"IEEE","publication":"EPE 19 ECCE Europe : CFP19850-USB","type":"conference_editor_article","date_created":"2020-12-14T12:50:15Z","user_id":"64800","date_updated":"2023-03-15T13:49:51Z","place":"Berlin","language":[{"iso":"eng"}],"_id":"4285","doi":"10.23919/EPE.2019.8915437"},{"publisher":"IEEE","status":"public","abstract":[{"lang":"eng","text":"This article deals with the determination of the lifetime of electrolytic capacitors operating in industrial DC micro grids, which are characterized by a particular large number of electrical drives. In addition to the advantages of such a DC grid, a test setup is proposed as a solution that allows an easy device testing. The paper shows with the help of simulations and practical measurements that if every device passes this test, it can be ensured that no capacitor in the DC grid is overloaded at all."}],"year":2019,"author":[{"last_name":"Puls","first_name":"S.","full_name":"Puls, S."},{"last_name":"Austermann","id":"42114","full_name":"Austermann, Johann","first_name":"Johann"},{"first_name":"Holger","full_name":"Borcherding, Holger","last_name":"Borcherding","id":"1693"}],"conference":{"location":"Matsue, Japan","name":"3rd IEEE International Conference on DC Microgrids (ICDCM 2019)","start_date":"2019-05-20","end_date":"2019-05-23"},"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"citation":{"chicago":"Puls, S., Johann Austermann, and Holger Borcherding. “Lifetime Calculation for Capacitors in Industrial Micro DC Grids.” In 2019 IEEE Third International Conference on DC Microgrids (ICDCM). IEEE, 2019. https://doi.org/10.1109/ICDCM45535.2019.9232854.","apa":"Puls, S., Austermann, J., & Borcherding, H. (2019). Lifetime Calculation for Capacitors in Industrial Micro DC grids. In 2019 IEEE Third International Conference on DC Microgrids (ICDCM). Matsue, Japan: IEEE. https://doi.org/10.1109/ICDCM45535.2019.9232854","ieee":"S. Puls, J. Austermann, and H. Borcherding, “Lifetime Calculation for Capacitors in Industrial Micro DC grids,” in 2019 IEEE Third International Conference on DC Microgrids (ICDCM), Matsue, Japan, 2019.","ufg":"Puls, S. et. al. (2019): Lifetime Calculation for Capacitors in Industrial Micro DC grids, in: 2019 IEEE Third International Conference on DC Microgrids (ICDCM).","bjps":"Puls S, Austermann J and Borcherding H (2019) Lifetime Calculation for Capacitors in Industrial Micro DC Grids. 2019 IEEE Third International Conference on DC Microgrids (ICDCM). IEEE.","havard":"S. Puls, J. Austermann, H. Borcherding, Lifetime Calculation for Capacitors in Industrial Micro DC grids, in: 2019 IEEE Third International Conference on DC Microgrids (ICDCM), IEEE, 2019.","mla":"Puls, S., et al. “Lifetime Calculation for Capacitors in Industrial Micro DC Grids.” 2019 IEEE Third International Conference on DC Microgrids (ICDCM), IEEE, 2019, doi:10.1109/ICDCM45535.2019.9232854.","van":"Puls S, Austermann J, Borcherding H. Lifetime Calculation for Capacitors in Industrial Micro DC grids. In: 2019 IEEE Third International Conference on DC Microgrids (ICDCM). IEEE; 2019.","ama":"Puls S, Austermann J, Borcherding H. Lifetime Calculation for Capacitors in Industrial Micro DC grids. In: 2019 IEEE Third International Conference on DC Microgrids (ICDCM). IEEE; 2019. doi:10.1109/ICDCM45535.2019.9232854","din1505-2-1":"Puls, S. ; Austermann, Johann ; Borcherding, Holger: Lifetime Calculation for Capacitors in Industrial Micro DC grids. In: 2019 IEEE Third International Conference on DC Microgrids (ICDCM) : IEEE, 2019","chicago-de":"Puls, S., Johann Austermann und Holger Borcherding. 2019. Lifetime Calculation for Capacitors in Industrial Micro DC grids. In: 2019 IEEE Third International Conference on DC Microgrids (ICDCM). IEEE. doi:10.1109/ICDCM45535.2019.9232854, .","short":"S. Puls, J. Austermann, H. Borcherding, in: 2019 IEEE Third International Conference on DC Microgrids (ICDCM), IEEE, 2019."},"publication_status":"published","title":"Lifetime Calculation for Capacitors in Industrial Micro DC grids","_id":"4288","doi":"10.1109/ICDCM45535.2019.9232854","language":[{"iso":"eng"}],"user_id":"64800","date_updated":"2023-03-15T13:49:51Z","publication":"2019 IEEE Third International Conference on DC Microgrids (ICDCM)","type":"conference","date_created":"2020-12-14T13:07:39Z"},{"_id":"4289","language":[{"iso":"ger"}],"place":"Haar","type":"industry_journal_article","date_created":"2020-12-14T13:16:16Z","publication":"Computer & Automation","publication_identifier":{"issn":["1615-8512"]},"date_updated":"2023-03-15T13:49:51Z","user_id":"15514","department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"year":2019,"main_file_link":[{"url":"https://www.computer-automation.de/feldebene/stromversorgung/dc-statt-ac-im-produktionsnetz.163684.html"}],"author":[{"id":"1693","first_name":"Holger","last_name":"Borcherding","full_name":"Borcherding, Holger"}],"publisher":"WEKA Fachmedien GmbH","status":"public","title":" DC statt AC im Produktionsnetz. Projekt „DC-Industrie“ – Teil 1 ","publication_status":"published","citation":{"apa":"Borcherding, H. (2019). DC statt AC im Produktionsnetz. Projekt „DC-Industrie“ – Teil 1 . Computer & Automation.","chicago":"Borcherding, Holger. “ DC statt AC im Produktionsnetz. Projekt „DC-Industrie“ – Teil 1 .” Computer & Automation, 2019.","van":"Borcherding H. DC statt AC im Produktionsnetz. Projekt „DC-Industrie“ – Teil 1 . Computer & Automation. 2019;","mla":"Borcherding, Holger. “ DC statt AC im Produktionsnetz. Projekt „DC-Industrie“ – Teil 1 .” Computer & Automation, WEKA Fachmedien GmbH, 2019.","havard":"H. Borcherding, DC statt AC im Produktionsnetz. Projekt „DC-Industrie“ – Teil 1 , Computer & Automation. (2019).","bjps":"Borcherding H (2019) DC statt AC im Produktionsnetz. Projekt „DC-Industrie“ – Teil 1 . Computer & Automation.","ufg":"Borcherding, Holger (2019): DC statt AC im Produktionsnetz. Projekt „DC-Industrie“ – Teil 1 , in: Computer & Automation.","short":"H. Borcherding, Computer & Automation (2019).","din1505-2-1":"Borcherding, Holger: DC statt AC im Produktionsnetz. Projekt „DC-Industrie“ – Teil 1 . In: Computer & Automation. Haar, WEKA Fachmedien GmbH (2019)","chicago-de":"Borcherding, Holger. 2019. DC statt AC im Produktionsnetz. Projekt „DC-Industrie“ – Teil 1 . Computer & Automation.","ieee":"H. Borcherding, “ DC statt AC im Produktionsnetz. Projekt „DC-Industrie“ – Teil 1 ,” Computer & Automation, 2019.","ama":"Borcherding H. DC statt AC im Produktionsnetz. Projekt „DC-Industrie“ – Teil 1 . Computer & Automation. 2019."}},{"_id":"4310","language":[{"iso":"eng"}],"oa":"1","user_id":"15514","date_updated":"2023-03-15T13:49:51Z","publication":"Proceedings of the International Congress and Conferences on Computational Design and Engineering (i3CDE'19), Penang, Malaysia, pp. 407 - 416","type":"conference","date_created":"2021-01-06T13:59:07Z","status":"public","abstract":[{"lang":"eng","text":"It is generally acknowledged that technological innovation is leading to an increase in the complexity of industrial work. Hence, work assistance has emerged as an important theme in the context of cyber-physical production systems and Industry 4.0 to assist workers in assembly, logistics, maintenance and supervision. Recent research in this domain has focused on demonstrating assistance applications using mobile computing devices such as tablets, smartphones, AR/VR glasses and wearables, but the aspects of technology induced complexity in industrial work distribution, concurrency, information complexity, and variability of information interaction, and their subsequent effect on human workers is yet to be tackled. This paper has two core contributions: first, it reframes the problem of complex industrial work through activity theory, which leads to a conceptual model that couples human information needs to interactive artefacts within an activity context. Second, the problem of assistance is viewed as managing information flow between multiple devices grouped into fluid and adaptive activity contexts, managed by MiWSICx, (Middleware for Work Support in Industrial Contexts) a novel, distributed middleware designed using the actor model of concurrent computation."}],"year":2019,"main_file_link":[{"open_access":"1","url":"https://www.th-owl.de/files/webs/eecs/labor/hci/publications/2019/I3CDE2019_FullPaper_CameraReady.pdf"}],"author":[{"full_name":"Dhiman, Hitesh","last_name":"Dhiman","id":"71767","first_name":"Hitesh"},{"full_name":"Röcker, Carsten","id":"61525","last_name":"Röcker","first_name":"Carsten"}],"conference":{"start_date":"20190-07","end_date":"2019-07-10","location":"Penang, Malaysia","name":"International Congress and Conferences on Computational Design and Engineering (i3CDE'19)"},"department":[{"_id":"DEP5023"}],"citation":{"ieee":"H. Dhiman and C. Röcker, “Middleware for Work Support in Industrial Contexts (MiWSICx),” in Proceedings of the International Congress and Conferences on Computational Design and Engineering (i3CDE’19), Penang, Malaysia, pp. 407 - 416, Penang, Malaysia, 2019.","ama":"Dhiman H, Röcker C. Middleware for Work Support in Industrial Contexts (MiWSICx). In: Proceedings of the International Congress and Conferences on Computational Design and Engineering (I3CDE’19), Penang, Malaysia, Pp. 407 - 416. ; 2019.","chicago":"Dhiman, Hitesh, and Carsten Röcker. “Middleware for Work Support in Industrial Contexts (MiWSICx).” In Proceedings of the International Congress and Conferences on Computational Design and Engineering (I3CDE’19), Penang, Malaysia, Pp. 407 - 416, 2019.","apa":"Dhiman, H., & Röcker, C. (2019). Middleware for Work Support in Industrial Contexts (MiWSICx). In Proceedings of the International Congress and Conferences on Computational Design and Engineering (i3CDE’19), Penang, Malaysia, pp. 407 - 416. Penang, Malaysia.","havard":"H. Dhiman, C. Röcker, Middleware for Work Support in Industrial Contexts (MiWSICx), in: Proceedings of the International Congress and Conferences on Computational Design and Engineering (I3CDE’19), Penang, Malaysia, Pp. 407 - 416, 2019.","mla":"Dhiman, Hitesh, and Carsten Röcker. “Middleware for Work Support in Industrial Contexts (MiWSICx).” Proceedings of the International Congress and Conferences on Computational Design and Engineering (I3CDE’19), Penang, Malaysia, Pp. 407 - 416, 2019.","bjps":"Dhiman H and Röcker C (2019) Middleware for Work Support in Industrial Contexts (MiWSICx). Proceedings of the International Congress and Conferences on Computational Design and Engineering (I3CDE’19), Penang, Malaysia, Pp. 407 - 416.","ufg":"Dhiman, Hitesh/Röcker, Carsten (2019): Middleware for Work Support in Industrial Contexts (MiWSICx), in: Proceedings of the International Congress and Conferences on Computational Design and Engineering (i3CDE’19), Penang, Malaysia, pp. 407 - 416.","van":"Dhiman H, Röcker C. Middleware for Work Support in Industrial Contexts (MiWSICx). In: Proceedings of the International Congress and Conferences on Computational Design and Engineering (i3CDE’19), Penang, Malaysia, pp 407 - 416. 2019.","chicago-de":"Dhiman, Hitesh und Carsten Röcker. 2019. Middleware for Work Support in Industrial Contexts (MiWSICx). In: Proceedings of the International Congress and Conferences on Computational Design and Engineering (i3CDE’19), Penang, Malaysia, pp. 407 - 416.","din1505-2-1":"Dhiman, Hitesh ; Röcker, Carsten: Middleware for Work Support in Industrial Contexts (MiWSICx). In: Proceedings of the International Congress and Conferences on Computational Design and Engineering (i3CDE’19), Penang, Malaysia, pp. 407 - 416, 2019","short":"H. Dhiman, C. Röcker, in: Proceedings of the International Congress and Conferences on Computational Design and Engineering (I3CDE’19), Penang, Malaysia, Pp. 407 - 416, 2019."},"publication_status":"published","title":"Middleware for Work Support in Industrial Contexts (MiWSICx)"},{"publisher":"IEEE","abstract":[{"lang":"eng","text":"Recent trends towards digitization in the industrial domain are also driving profound socio-technical changes. On the one hand, these technologies enable shorter product lifecycles and servitization, but on the other hand, the increasing technical complexity of the equipment makes its operation and maintenance a challenge for workers. Assistance systems using pervasive technologies can bridge the gap between the abilities of the workers and the demands of handling technical complexity by enriching workplace activities with relevant, context-dependent information. In this paper, we present an application that replaces a conventional, paper-based maintenance manual with digital, Augmented Reality based instructions that are delivered at the appropriate place and time."}],"conference":{"start_date":"2019-03-11","end_date":"2019-03-15","location":"Kyoto, Japan","name":"2019 IEEE International Conference on Pervasive Computing and Communications "},"department":[{"_id":"DEP5023"}],"publication_status":"published","_id":"4311","doi":"10.1109/PERCOMW.2019.8730771","place":"Piscataway, NJ","user_id":"15514","type":"book_chapter","status":"public","page":"95 - 100","author":[{"last_name":"Dhiman","full_name":"Dhiman, Hitesh","id":"71767","first_name":"Hitesh"},{"first_name":"Carsten","id":"61525","last_name":"Röcker","full_name":"Röcker, Carsten"}],"year":2019,"citation":{"ama":"Dhiman H, Röcker C. Worker Assistance in Smart Production Environments using Pervasive Technologies. In: 2019 IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops). Piscataway, NJ: IEEE; 2019:95-100. doi:10.1109/PERCOMW.2019.8730771","ieee":"H. Dhiman and C. Röcker, “Worker Assistance in Smart Production Environments using Pervasive Technologies,” in 2019 IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops), Piscataway, NJ: IEEE, 2019, pp. 95–100.","chicago-de":"Dhiman, Hitesh und Carsten Röcker. 2019. Worker Assistance in Smart Production Environments using Pervasive Technologies. In: 2019 IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops), 95–100. Piscataway, NJ: IEEE. doi:10.1109/PERCOMW.2019.8730771, .","din1505-2-1":"Dhiman, Hitesh ; Röcker, Carsten: Worker Assistance in Smart Production Environments using Pervasive Technologies. In: 2019 IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops). Piscataway, NJ : IEEE, 2019, S. 95–100","short":"H. Dhiman, C. Röcker, in: 2019 IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops), IEEE, Piscataway, NJ, 2019, pp. 95–100.","ufg":"Dhiman, Hitesh/Röcker, Carsten (2019): Worker Assistance in Smart Production Environments using Pervasive Technologies, in: 2019 IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops), Piscataway, NJ, S. 95–100.","bjps":"Dhiman H and Röcker C (2019) Worker Assistance in Smart Production Environments Using Pervasive Technologies. 2019 IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops). Piscataway, NJ: IEEE, pp. 95–100.","mla":"Dhiman, Hitesh, and Carsten Röcker. “Worker Assistance in Smart Production Environments Using Pervasive Technologies.” 2019 IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops), IEEE, 2019, pp. 95–100, doi:10.1109/PERCOMW.2019.8730771.","havard":"H. Dhiman, C. Röcker, Worker Assistance in Smart Production Environments using Pervasive Technologies, in: 2019 IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops), IEEE, Piscataway, NJ, 2019: pp. 95–100.","van":"Dhiman H, Röcker C. Worker Assistance in Smart Production Environments using Pervasive Technologies. In: 2019 IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops). Piscataway, NJ: IEEE; 2019. p. 95–100.","chicago":"Dhiman, Hitesh, and Carsten Röcker. “Worker Assistance in Smart Production Environments Using Pervasive Technologies.” In 2019 IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops), 95–100. Piscataway, NJ: IEEE, 2019. https://doi.org/10.1109/PERCOMW.2019.8730771.","apa":"Dhiman, H., & Röcker, C. (2019). Worker Assistance in Smart Production Environments using Pervasive Technologies. In 2019 IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops) (pp. 95–100). Piscataway, NJ: IEEE. https://doi.org/10.1109/PERCOMW.2019.8730771"},"title":"Worker Assistance in Smart Production Environments using Pervasive Technologies","keyword":["Industry 4.0","Cyber Physical Systems","Augmented Reality","Complexity","Maintenance","HoloLens"],"language":[{"iso":"eng"}],"date_updated":"2023-03-15T13:49:51Z","publication":"2019 IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops)","publication_identifier":{"isbn":["978-1-5386-9151-9"]},"date_created":"2021-01-06T13:59:08Z"},{"author":[{"full_name":"Fullen, Marta","last_name":"Fullen","first_name":"Marta"},{"full_name":"Maier, Alexander","last_name":"Maier","first_name":"Alexander","id":"11158"},{"first_name":"Arthur","full_name":"Nazarenko, Arthur","last_name":"Nazarenko"},{"first_name":"Sascha","full_name":"Jenderny, Sascha","last_name":"Jenderny"},{"last_name":"Röcker","id":"61525","first_name":"Carsten","full_name":"Röcker, Carsten"}],"year":2019,"page":"296 - 302","status":"public","title":"Machine Learning for Assistance Systems: Pattern-Based Approach to Online Step Recognition","citation":{"din1505-2-1":"Fullen, Marta ; Maier, Alexander ; Nazarenko, Arthur ; Jenderny, Sascha ; Röcker, Carsten: Machine Learning for Assistance Systems: Pattern-Based Approach to Online Step Recognition. In: IEEE (Hrsg.): 2019 IEEE 17th International Conference on Industrial Informatics (INDIN). Piscataway, NJ : IEEE, 2019, S. 296–302","chicago-de":"Fullen, Marta, Alexander Maier, Arthur Nazarenko, Sascha Jenderny und Carsten Röcker. 2019. Machine Learning for Assistance Systems: Pattern-Based Approach to Online Step Recognition. In: 2019 IEEE 17th International Conference on Industrial Informatics (INDIN), hg. von IEEE, 296–302. Piscataway, NJ : IEEE. doi:10.1109/INDIN41052.2019.8972122, .","short":"M. Fullen, A. Maier, A. Nazarenko, S. Jenderny, C. Röcker, in: IEEE (Ed.), 2019 IEEE 17th International Conference on Industrial Informatics (INDIN), IEEE, Piscataway, NJ , 2019, pp. 296–302.","mla":"Fullen, Marta, et al. “Machine Learning for Assistance Systems: Pattern-Based Approach to Online Step Recognition.” 2019 IEEE 17th International Conference on Industrial Informatics (INDIN), edited by IEEE, IEEE, 2019, pp. 296–302, doi:10.1109/INDIN41052.2019.8972122.","havard":"M. Fullen, A. Maier, A. Nazarenko, S. Jenderny, C. Röcker, Machine Learning for Assistance Systems: Pattern-Based Approach to Online Step Recognition, in: IEEE (Ed.), 2019 IEEE 17th International Conference on Industrial Informatics (INDIN), IEEE, Piscataway, NJ , 2019: pp. 296–302.","bjps":"Fullen M et al. (2019) Machine Learning for Assistance Systems: Pattern-Based Approach to Online Step Recognition. In IEEE (ed.), 2019 IEEE 17th International Conference on Industrial Informatics (INDIN). Piscataway, NJ : IEEE, pp. 296–302.","ufg":"Fullen, Marta et. al. (2019): Machine Learning for Assistance Systems: Pattern-Based Approach to Online Step Recognition, in: IEEE (Hg.): 2019 IEEE 17th International Conference on Industrial Informatics (INDIN), Piscataway, NJ , S. 296–302.","van":"Fullen M, Maier A, Nazarenko A, Jenderny S, Röcker C. Machine Learning for Assistance Systems: Pattern-Based Approach to Online Step Recognition. In: IEEE, editor. 2019 IEEE 17th International Conference on Industrial Informatics (INDIN). Piscataway, NJ : IEEE; 2019. p. 296–302.","chicago":"Fullen, Marta, Alexander Maier, Arthur Nazarenko, Sascha Jenderny, and Carsten Röcker. “Machine Learning for Assistance Systems: Pattern-Based Approach to Online Step Recognition.” In 2019 IEEE 17th International Conference on Industrial Informatics (INDIN), edited by IEEE, 296–302. Piscataway, NJ : IEEE, 2019. https://doi.org/10.1109/INDIN41052.2019.8972122.","apa":"Fullen, M., Maier, A., Nazarenko, A., Jenderny, S., & Röcker, C. (2019). Machine Learning for Assistance Systems: Pattern-Based Approach to Online Step Recognition. In IEEE (Ed.), 2019 IEEE 17th International Conference on Industrial Informatics (INDIN) (pp. 296–302). Piscataway, NJ : IEEE. https://doi.org/10.1109/INDIN41052.2019.8972122","ama":"Fullen M, Maier A, Nazarenko A, Jenderny S, Röcker C. Machine Learning for Assistance Systems: Pattern-Based Approach to Online Step Recognition. In: IEEE, ed. 2019 IEEE 17th International Conference on Industrial Informatics (INDIN). Piscataway, NJ : IEEE; 2019:296-302. doi:10.1109/INDIN41052.2019.8972122","ieee":"M. Fullen, A. Maier, A. Nazarenko, S. Jenderny, and C. Röcker, “Machine Learning for Assistance Systems: Pattern-Based Approach to Online Step Recognition,” in 2019 IEEE 17th International Conference on Industrial Informatics (INDIN), IEEE, Ed. Piscataway, NJ : IEEE, 2019, pp. 296–302."},"language":[{"iso":"eng"}],"keyword":["augmented reality","computer based training","data handling","industrial training","learning (artificial intelligence)","time series"],"date_created":"2021-01-06T13:59:10Z","publication_identifier":{"isbn":["978-1-7281-2927-3"],"issn":["2378-363X"]},"publication":"2019 IEEE 17th International Conference on Industrial Informatics (INDIN)","date_updated":"2023-03-15T13:49:51Z","corporate_editor":["IEEE"],"conference":{"location":"Helsinki, Finland,","name":"17th International Conference on Industrial Informatics (INDIN)","end_date":"2019-07-25","start_date":"2019-07-22"},"department":[{"_id":"DEP5023"}],"abstract":[{"lang":"eng","text":"Computer-aided assistance systems are entering the world of work and production. Such systems utilize augmented- and virtual-reality for operator training and live guidance as well as mobile maintenance and support. This is particularly important in the modern production reality of ever-changing products and `lot size one' customization of production.This paper focuses on the application of machine learning approach to extend the functionality of assistance systems. Machine learning provides tools to analyse large amounts of data and extract meaningful information. The goal here is to recognize the movement of an operator which would enable automatic display of instructions relevant to them.We present the challenges facing machine learning applications in human-centered assistance systems and a framework to assess machine learning approaches feasible for this scenario. The approach is assessed on a historical data set and then deployed in a work station for live testing. The post-hoc, or historical, analysis yields promising results. The ad-hoc, or live, analysis is a complex task and the results are affected by multiple factors, most of which are introduced by the human influence.The contribution of this paper is an approach to adapt state- of-the-art machine learning to operator movement recognition with a special focus on approaches to spatial time series data pre-processing. Presented experiment results validate the approach and show that it performs well in a real-world scenario."}],"publisher":"IEEE","publication_status":"published","place":"Piscataway, NJ ","doi":"10.1109/INDIN41052.2019.8972122","_id":"4312","type":"book_chapter","user_id":"15514"},{"series_title":" Advances in Intelligent Systems and Computing","publication_status":"published","abstract":[{"lang":"eng","text":"This paper reports on a study (N = 471) exploring the acceptance of video-based home monitoring systems as well as criteria influencing their acceptance. While most participants stated that they would home monitoring solutions under certain conditions, the majority of participants is rather reluctant to use systems that transmit visual and acoustical information to remote medical personnel. Besides age, most user characteristics, which played important roles in technology acceptance research for many years, do not appear to be decisive factors for the acceptance of electronic home-monitoring services."}],"department":[{"_id":"DEP5023"}],"conference":{"start_date":"2019-02-07","end_date":"2019-0210","location":"San Diego, California, USA","name":"2nd International Conference on Intelligent Human Systems Integration (IHSI 2019): Integrating People and Intelligent Systems"},"publisher":"Springer","type":"book_chapter","intvolume":" 903","user_id":"15514","_id":"4313","doi":"10.1007/978-3-030-11051-2_83","place":"Cham","title":"Exploring the Acceptance of Video-Based Medical Support","citation":{"din1505-2-1":"Röcker, Carsten: Exploring the Acceptance of Video-Based Medical Support. In: Karwowski, W. ; Ahram, T. (Hrsg.): Intelligent Human Systems Integration 2019, Advances in Intelligent Systems and Computing. Bd. 903. Cham : Springer, 2019, S. 551–556","chicago-de":"Röcker, Carsten. 2019. Exploring the Acceptance of Video-Based Medical Support. In: Intelligent Human Systems Integration 2019, hg. von Waldemar Karwowski und Tareq Ahram, 903:551–556. Advances in Intelligent Systems and Computing. Cham: Springer. doi:10.1007/978-3-030-11051-2_83, .","short":"C. Röcker, in: W. Karwowski, T. Ahram (Eds.), Intelligent Human Systems Integration 2019, Springer, Cham, 2019, pp. 551–556.","chicago":"Röcker, Carsten. “Exploring the Acceptance of Video-Based Medical Support.” In Intelligent Human Systems Integration 2019, edited by Waldemar Karwowski and Tareq Ahram, 903:551–56. Advances in Intelligent Systems and Computing. Cham: Springer, 2019. https://doi.org/10.1007/978-3-030-11051-2_83.","apa":"Röcker, C. (2019). Exploring the Acceptance of Video-Based Medical Support. In W. Karwowski & T. Ahram (Eds.), Intelligent Human Systems Integration 2019 (Vol. 903, pp. 551–556). Cham: Springer. https://doi.org/10.1007/978-3-030-11051-2_83","ieee":"C. Röcker, “Exploring the Acceptance of Video-Based Medical Support,” in Intelligent Human Systems Integration 2019, vol. 903, W. Karwowski and T. Ahram, Eds. Cham: Springer, 2019, pp. 551–556.","ufg":"Röcker, Carsten (2019): Exploring the Acceptance of Video-Based Medical Support, in: Waldemar Karwowski/Tareq Ahram (Hgg.): Intelligent Human Systems Integration 2019 (= Advances in Intelligent Systems and Computing 903), Cham, S. 551–556.","havard":"C. Röcker, Exploring the Acceptance of Video-Based Medical Support, in: W. Karwowski, T. Ahram (Eds.), Intelligent Human Systems Integration 2019, Springer, Cham, 2019: pp. 551–556.","mla":"Röcker, Carsten. “Exploring the Acceptance of Video-Based Medical Support.” Intelligent Human Systems Integration 2019, edited by Waldemar Karwowski and Tareq Ahram, vol. 903, Springer, 2019, pp. 551–56, doi:10.1007/978-3-030-11051-2_83.","bjps":"Röcker C (2019) Exploring the Acceptance of Video-Based Medical Support. In Karwowski W and Ahram T (eds), Intelligent Human Systems Integration 2019, vol. 903. Cham: Springer, pp. 551–556.","van":"Röcker C. Exploring the Acceptance of Video-Based Medical Support. In: Karwowski W, Ahram T, editors. Intelligent Human Systems Integration 2019. Cham: Springer; 2019. p. 551–6. ( Advances in Intelligent Systems and Computing; vol. 903).","ama":"Röcker C. Exploring the Acceptance of Video-Based Medical Support. In: Karwowski W, Ahram T, eds. Intelligent Human Systems Integration 2019. Vol 903. Advances in Intelligent Systems and Computing. Cham: Springer; 2019:551-556. doi:10.1007/978-3-030-11051-2_83"},"volume":903,"author":[{"first_name":"Carsten","full_name":"Röcker, Carsten","id":"61525","last_name":"Röcker"}],"year":2019,"status":"public","page":"551 - 556","publication_identifier":{"isbn":["978-3-030-11050-5"],"eisbn":["978-3-030-11051-2"]},"publication":"Intelligent Human Systems Integration 2019","date_created":"2021-01-06T13:59:11Z","editor":[{"full_name":"Karwowski, Waldemar","first_name":"Waldemar","last_name":"Karwowski"},{"last_name":"Ahram","first_name":"Tareq","full_name":"Ahram, Tareq"}],"date_updated":"2023-03-15T13:49:51Z","keyword":["Active assisted living","Electronic homecare","e-health : Video-based monitoring","Technology acceptance","User-centered design","Study"],"language":[{"iso":"eng"}]},{"language":[{"iso":"eng"}],"place":"Cham","_id":"4315","date_updated":"2023-03-15T13:49:51Z","user_id":"15514","type":"conference","date_created":"2021-01-06T13:59:14Z","publication":"International Cross-Domain Conference for Machine Learning and Knowledge Extraction","status":"public","publisher":"Springer","department":[{"_id":"DEP5023"}],"conference":{"end_date":"2019-08-29","start_date":"2019-08-26","name":"International Cross-Domain Conference for Machine Learning and Knowledge Extraction","location":"Canterbury, United Kingdom."},"author":[{"first_name":"Mario","last_name":"Heinz","full_name":"Heinz, Mario","id":"68913"},{"id":"71767","first_name":"Hitesh","last_name":"Dhiman","full_name":"Dhiman, Hitesh"},{"first_name":"Carsten","id":"61525","last_name":"Röcker","full_name":"Röcker, Carsten"}],"year":2019,"abstract":[{"text":"Recent advances in the field of industrial digitization and automation lead to an increasing need for assistance systems to support workers in various fields of activity, such as assembly, logistics and maintenance. Current assistance systems for the maintenance area are usually based on a single visualization tech- nology. However, in our view, this is not practicable in terms of real activities, as these operations involve various subtasks for which different interaction con- cepts would be advantageous. Therefore, in this paper, we propose a concept for a multi-device assistive system, which combines multiple devices to provide workers with relevant information over different subtasks of a maintenance operation and present our first prototype for such a system. ","lang":"eng"}],"publication_status":"published","citation":{"ieee":"M. Heinz, H. Dhiman, and C. Röcker, “A Multi-Device Assistive System for Industrial Maintenance Operations,” in International Cross-Domain Conference for Machine Learning and Knowledge Extraction, Canterbury, United Kingdom., 2019.","ama":"Heinz M, Dhiman H, Röcker C. A Multi-Device Assistive System for Industrial Maintenance Operations. In: International Cross-Domain Conference for Machine Learning and Knowledge Extraction. Cham: Springer; 2019.","din1505-2-1":"Heinz, Mario ; Dhiman, Hitesh ; Röcker, Carsten: A Multi-Device Assistive System for Industrial Maintenance Operations. In: International Cross-Domain Conference for Machine Learning and Knowledge Extraction. Cham : Springer, 2019","chicago-de":"Heinz, Mario, Hitesh Dhiman und Carsten Röcker. 2019. A Multi-Device Assistive System for Industrial Maintenance Operations. In: International Cross-Domain Conference for Machine Learning and Knowledge Extraction. Cham: Springer.","short":"M. Heinz, H. Dhiman, C. Röcker, in: International Cross-Domain Conference for Machine Learning and Knowledge Extraction, Springer, Cham, 2019.","chicago":"Heinz, Mario, Hitesh Dhiman, and Carsten Röcker. “A Multi-Device Assistive System for Industrial Maintenance Operations.” In International Cross-Domain Conference for Machine Learning and Knowledge Extraction. Cham: Springer, 2019.","apa":"Heinz, M., Dhiman, H., & Röcker, C. (2019). A Multi-Device Assistive System for Industrial Maintenance Operations. In International Cross-Domain Conference for Machine Learning and Knowledge Extraction. Cham: Springer.","havard":"M. Heinz, H. Dhiman, C. Röcker, A Multi-Device Assistive System for Industrial Maintenance Operations, in: International Cross-Domain Conference for Machine Learning and Knowledge Extraction, Springer, Cham, 2019.","mla":"Heinz, Mario, et al. “A Multi-Device Assistive System for Industrial Maintenance Operations.” International Cross-Domain Conference for Machine Learning and Knowledge Extraction, Springer, 2019.","bjps":"Heinz M, Dhiman H and Röcker C (2019) A Multi-Device Assistive System for Industrial Maintenance Operations. International Cross-Domain Conference for Machine Learning and Knowledge Extraction. Cham: Springer.","ufg":"Heinz, Mario et. al. (2019): A Multi-Device Assistive System for Industrial Maintenance Operations, in: International Cross-Domain Conference for Machine Learning and Knowledge Extraction, Cham.","van":"Heinz M, Dhiman H, Röcker C. A Multi-Device Assistive System for Industrial Maintenance Operations. In: International Cross-Domain Conference for Machine Learning and Knowledge Extraction. Cham: Springer; 2019."},"title":"A Multi-Device Assistive System for Industrial Maintenance Operations"},{"title":"TSN: Der Digitale Zwilling","citation":{"ieee":"J. Jasperneite and S. Schriegel, “TSN: Der Digitale Zwilling,” Sonderheft ComputerAutomation, WEKA FACHMEDIEN, Haar, 2019.","ama":"Jasperneite J, Schriegel S. TSN: Der Digitale Zwilling. Sonderheft ComputerAutomation, WEKA FACHMEDIEN, Haar. 2019.","apa":"Jasperneite, J., & Schriegel, S. (2019). TSN: Der Digitale Zwilling. Sonderheft ComputerAutomation, WEKA FACHMEDIEN, Haar.","chicago":"Jasperneite, Jürgen, and Sebastian Schriegel. “TSN: Der Digitale Zwilling.” Sonderheft ComputerAutomation, WEKA FACHMEDIEN, Haar, 2019.","van":"Jasperneite J, Schriegel S. TSN: Der Digitale Zwilling. Sonderheft ComputerAutomation, WEKA FACHMEDIEN, Haar. 2019;","bjps":"Jasperneite J and Schriegel S (2019) TSN: Der Digitale Zwilling. Sonderheft ComputerAutomation, WEKA FACHMEDIEN, Haar.","mla":"Jasperneite, Jürgen, and Sebastian Schriegel. “TSN: Der Digitale Zwilling.” Sonderheft ComputerAutomation, WEKA FACHMEDIEN, Haar, 2019.","havard":"J. Jasperneite, S. Schriegel, TSN: Der Digitale Zwilling, Sonderheft ComputerAutomation, WEKA FACHMEDIEN, Haar. (2019).","ufg":"Jasperneite, Jürgen/Schriegel, Sebastian (2019): TSN: Der Digitale Zwilling, in: Sonderheft ComputerAutomation, WEKA FACHMEDIEN, Haar.","short":"J. Jasperneite, S. Schriegel, Sonderheft ComputerAutomation, WEKA FACHMEDIEN, Haar (2019).","chicago-de":"Jasperneite, Jürgen und Sebastian Schriegel. 2019. TSN: Der Digitale Zwilling. Sonderheft ComputerAutomation, WEKA FACHMEDIEN, Haar.","din1505-2-1":"Jasperneite, Jürgen ; Schriegel, Sebastian: TSN: Der Digitale Zwilling. In: Sonderheft ComputerAutomation, WEKA FACHMEDIEN, Haar (2019)"},"department":[{"_id":"DEP5023"}],"year":2019,"author":[{"full_name":"Jasperneite, Jürgen","id":"1899","first_name":"Jürgen","last_name":"Jasperneite"},{"first_name":"Sebastian","full_name":"Schriegel, Sebastian","last_name":"Schriegel"}],"status":"public","date_created":"2021-01-21T10:18:20Z","type":"journal_article","publication":"Sonderheft ComputerAutomation, WEKA FACHMEDIEN, Haar","date_updated":"2023-03-15T13:49:53Z","user_id":"74222","_id":"4502","language":[{"iso":"eng"}]},{"title":"Digitale Transformation in Klein- und Mittelstädten am Beispiel des IoT-Reallabors Lemgo Digital","citation":{"ieee":"J. Jasperneite, “Digitale Transformation in Klein- und Mittelstädten am Beispiel des IoT-Reallabors Lemgo Digital,” in 24. Industrial Communication Congress, 2019.","ama":"Jasperneite J. Digitale Transformation in Klein- und Mittelstädten am Beispiel des IoT-Reallabors Lemgo Digital. In: 24. Industrial Communication Congress. Bad Pyrmont; 2019.","apa":"Jasperneite, J. (2019). Digitale Transformation in Klein- und Mittelstädten am Beispiel des IoT-Reallabors Lemgo Digital. In 24. Industrial Communication Congress. Bad Pyrmont.","chicago":"Jasperneite, Jürgen. “Digitale Transformation in Klein- Und Mittelstädten Am Beispiel Des IoT-Reallabors Lemgo Digital.” In 24. Industrial Communication Congress. Bad Pyrmont, 2019.","van":"Jasperneite J. Digitale Transformation in Klein- und Mittelstädten am Beispiel des IoT-Reallabors Lemgo Digital. In: 24 Industrial Communication Congress. Bad Pyrmont; 2019.","mla":"Jasperneite, Jürgen. “Digitale Transformation in Klein- Und Mittelstädten Am Beispiel Des IoT-Reallabors Lemgo Digital.” 24. Industrial Communication Congress, 2019.","bjps":"Jasperneite J (2019) Digitale Transformation in Klein- Und Mittelstädten Am Beispiel Des IoT-Reallabors Lemgo Digital. 24. Industrial Communication Congress. Bad Pyrmont.","havard":"J. Jasperneite, Digitale Transformation in Klein- und Mittelstädten am Beispiel des IoT-Reallabors Lemgo Digital, in: 24. Industrial Communication Congress, Bad Pyrmont, 2019.","ufg":"Jasperneite, Jürgen (2019): Digitale Transformation in Klein- und Mittelstädten am Beispiel des IoT-Reallabors Lemgo Digital, in: 24. Industrial Communication Congress, Bad Pyrmont.","short":"J. Jasperneite, in: 24. Industrial Communication Congress, Bad Pyrmont, 2019.","chicago-de":"Jasperneite, Jürgen. 2019. Digitale Transformation in Klein- und Mittelstädten am Beispiel des IoT-Reallabors Lemgo Digital. In: 24. Industrial Communication Congress. Bad Pyrmont.","din1505-2-1":"Jasperneite, Jürgen: Digitale Transformation in Klein- und Mittelstädten am Beispiel des IoT-Reallabors Lemgo Digital. In: 24. Industrial Communication Congress. Bad Pyrmont, 2019"},"author":[{"last_name":"Jasperneite","id":"1899","first_name":"Jürgen","full_name":"Jasperneite, Jürgen"}],"year":2019,"department":[{"_id":"DEP5023"}],"status":"public","publication":"24. Industrial Communication Congress","date_created":"2021-01-21T10:40:37Z","type":"conference","user_id":"74222","date_updated":"2023-03-15T13:49:53Z","place":"Bad Pyrmont","language":[{"iso":"eng"}],"_id":"4503"},{"language":[{"iso":"eng"}],"_id":"5588","doi":"10.1109/indin41052.2019.8972148","user_id":"45673","date_updated":"2023-03-15T13:50:00Z","publication":"2019 IEEE 17th International Conference on Industrial Informatics (INDIN)","publication_identifier":{"isbn":["9781728129273"]},"date_created":"2021-04-19T09:10:05Z","type":"conference","status":"public","year":2019,"author":[{"full_name":"Karthikeyan, Gajasri","first_name":"Gajasri","last_name":"Karthikeyan","id":"65158"},{"full_name":"Heiss, Stefan","first_name":"Stefan","last_name":"Heiss","id":"1031"}],"department":[{"_id":"DEP5000"},{"_id":"DEP5023"}],"citation":{"ama":"Karthikeyan G, Heiss S. Enhancing Authorization Mechanisms using Attribute Certificates for OPC UA based Applications. In: 2019 IEEE 17th International Conference on Industrial Informatics (INDIN). ; 2019. doi:10.1109/indin41052.2019.8972148","ieee":"G. Karthikeyan and S. Heiss, “Enhancing Authorization Mechanisms using Attribute Certificates for OPC UA based Applications,” in 2019 IEEE 17th International Conference on Industrial Informatics (INDIN), 2019.","din1505-2-1":"Karthikeyan, Gajasri ; Heiss, Stefan: Enhancing Authorization Mechanisms using Attribute Certificates for OPC UA based Applications. In: 2019 IEEE 17th International Conference on Industrial Informatics (INDIN), 2019","chicago-de":"Karthikeyan, Gajasri und Stefan Heiss. 2019. Enhancing Authorization Mechanisms using Attribute Certificates for OPC UA based Applications. In: 2019 IEEE 17th International Conference on Industrial Informatics (INDIN). doi:10.1109/indin41052.2019.8972148, .","short":"G. Karthikeyan, S. Heiss, in: 2019 IEEE 17th International Conference on Industrial Informatics (INDIN), 2019.","ufg":"Karthikeyan, Gajasri/Heiss, Stefan (2019): Enhancing Authorization Mechanisms using Attribute Certificates for OPC UA based Applications, in: 2019 IEEE 17th International Conference on Industrial Informatics (INDIN).","bjps":"Karthikeyan G and Heiss S (2019) Enhancing Authorization Mechanisms Using Attribute Certificates for OPC UA Based Applications. 2019 IEEE 17th International Conference on Industrial Informatics (INDIN).","havard":"G. Karthikeyan, S. Heiss, Enhancing Authorization Mechanisms using Attribute Certificates for OPC UA based Applications, in: 2019 IEEE 17th International Conference on Industrial Informatics (INDIN), 2019.","mla":"Karthikeyan, Gajasri, and Stefan Heiss. “Enhancing Authorization Mechanisms Using Attribute Certificates for OPC UA Based Applications.” 2019 IEEE 17th International Conference on Industrial Informatics (INDIN), 2019, doi:10.1109/indin41052.2019.8972148.","van":"Karthikeyan G, Heiss S. Enhancing Authorization Mechanisms using Attribute Certificates for OPC UA based Applications. In: 2019 IEEE 17th International Conference on Industrial Informatics (INDIN). 2019.","chicago":"Karthikeyan, Gajasri, and Stefan Heiss. “Enhancing Authorization Mechanisms Using Attribute Certificates for OPC UA Based Applications.” In 2019 IEEE 17th International Conference on Industrial Informatics (INDIN), 2019. https://doi.org/10.1109/indin41052.2019.8972148.","apa":"Karthikeyan, G., & Heiss, S. (2019). Enhancing Authorization Mechanisms using Attribute Certificates for OPC UA based Applications. In 2019 IEEE 17th International Conference on Industrial Informatics (INDIN). https://doi.org/10.1109/indin41052.2019.8972148"},"publication_status":"published","title":"Enhancing Authorization Mechanisms using Attribute Certificates for OPC UA based Applications"},{"publication_status":"published","citation":{"chicago-de":"Tebbje, S., K.-H. Niemann, M. Friesen, G. Karthikeyan, Stefan Heiss, L. Jänicke, C. Meyer und H. Trsek. 2019. Entwicklung einer IT-Sicherheitsinfrastruktur für verteilte Automatisierungssysteme – Integration verschiedener Middleware-Lösungen in eine, durch Attributzertifikate erweiterte, Public-Key-Infrastruk... In: Automation 2019. doi:10.51202/9783181023518-505, .","din1505-2-1":"Tebbje, S. ; Niemann, K.-H. ; Friesen, M. ; Karthikeyan, G. ; Heiss, Stefan ; Jänicke, L. ; Meyer, C. ; Trsek, H.: Entwicklung einer IT-Sicherheitsinfrastruktur für verteilte Automatisierungssysteme – Integration verschiedener Middleware-Lösungen in eine, durch Attributzertifikate erweiterte, Public-Key-Infrastruk... In: Automation 2019, 2019","short":"S. Tebbje, K.-H. Niemann, M. Friesen, G. Karthikeyan, S. Heiss, L. Jänicke, C. Meyer, H. Trsek, in: Automation 2019, 2019.","chicago":"Tebbje, S., K.-H. Niemann, M. Friesen, G. Karthikeyan, Stefan Heiss, L. Jänicke, C. Meyer, and H. Trsek. “Entwicklung Einer IT-Sicherheitsinfrastruktur Für Verteilte Automatisierungssysteme – Integration Verschiedener Middleware-Lösungen in Eine, Durch Attributzertifikate Erweiterte, Public-Key-Infrastruk...” In Automation 2019, 2019. https://doi.org/10.51202/9783181023518-505.","ieee":"S. Tebbje et al., “Entwicklung einer IT-Sicherheitsinfrastruktur für verteilte Automatisierungssysteme – Integration verschiedener Middleware-Lösungen in eine, durch Attributzertifikate erweiterte, Public-Key-Infrastruk...,” in Automation 2019, 2019.","apa":"Tebbje, S., Niemann, K.-H., Friesen, M., Karthikeyan, G., Heiss, S., Jänicke, L., … Trsek, H. (2019). Entwicklung einer IT-Sicherheitsinfrastruktur für verteilte Automatisierungssysteme – Integration verschiedener Middleware-Lösungen in eine, durch Attributzertifikate erweiterte, Public-Key-Infrastruk... In Automation 2019. https://doi.org/10.51202/9783181023518-505","mla":"Tebbje, S., et al. “Entwicklung Einer IT-Sicherheitsinfrastruktur Für Verteilte Automatisierungssysteme – Integration Verschiedener Middleware-Lösungen in Eine, Durch Attributzertifikate Erweiterte, Public-Key-Infrastruk...” Automation 2019, 2019, doi:10.51202/9783181023518-505.","havard":"S. Tebbje, K.-H. Niemann, M. Friesen, G. Karthikeyan, S. Heiss, L. Jänicke, C. Meyer, H. Trsek, Entwicklung einer IT-Sicherheitsinfrastruktur für verteilte Automatisierungssysteme – Integration verschiedener Middleware-Lösungen in eine, durch Attributzertifikate erweiterte, Public-Key-Infrastruk..., in: Automation 2019, 2019.","bjps":"Tebbje S et al. (2019) Entwicklung Einer IT-Sicherheitsinfrastruktur Für Verteilte Automatisierungssysteme – Integration Verschiedener Middleware-Lösungen in Eine, Durch Attributzertifikate Erweiterte, Public-Key-Infrastruk... Automation 2019.","ufg":"Tebbje, S. et. al. (2019): Entwicklung einer IT-Sicherheitsinfrastruktur für verteilte Automatisierungssysteme – Integration verschiedener Middleware-Lösungen in eine, durch Attributzertifikate erweiterte, Public-Key-Infrastruk..., in: Automation 2019.","ama":"Tebbje S, Niemann K-H, Friesen M, et al. Entwicklung einer IT-Sicherheitsinfrastruktur für verteilte Automatisierungssysteme – Integration verschiedener Middleware-Lösungen in eine, durch Attributzertifikate erweiterte, Public-Key-Infrastruk... In: Automation 2019. ; 2019. doi:10.51202/9783181023518-505","van":"Tebbje S, Niemann K-H, Friesen M, Karthikeyan G, Heiss S, Jänicke L, et al. Entwicklung einer IT-Sicherheitsinfrastruktur für verteilte Automatisierungssysteme – Integration verschiedener Middleware-Lösungen in eine, durch Attributzertifikate erweiterte, Public-Key-Infrastruk... In: Automation 2019. 2019."},"title":"Entwicklung einer IT-Sicherheitsinfrastruktur für verteilte Automatisierungssysteme – Integration verschiedener Middleware-Lösungen in eine, durch Attributzertifikate erweiterte, Public-Key-Infrastruk...","status":"public","department":[{"_id":"DEP5000"},{"_id":"DEP5023"}],"author":[{"full_name":"Tebbje, S.","last_name":"Tebbje","first_name":"S."},{"first_name":"K.-H.","last_name":"Niemann","full_name":"Niemann, K.-H."},{"full_name":"Friesen, M.","first_name":"M.","last_name":"Friesen"},{"last_name":"Karthikeyan","first_name":"G.","full_name":"Karthikeyan, G."},{"full_name":"Heiss, Stefan","first_name":"Stefan","id":"1031","last_name":"Heiss"},{"first_name":"L.","last_name":"Jänicke","full_name":"Jänicke, L."},{"full_name":"Meyer, C.","last_name":"Meyer","first_name":"C."},{"last_name":"Trsek","full_name":"Trsek, H.","first_name":"H."}],"year":2019,"date_updated":"2023-03-15T13:50:00Z","user_id":"10982","date_created":"2021-04-19T09:21:28Z","type":"book_chapter","publication":"Automation 2019","publication_identifier":{"isbn":["9783181023518"]},"doi":"10.51202/9783181023518-505","_id":"5589","language":[{"iso":"eng"}]},{"department":[{"_id":"DEP5000"},{"_id":"DEP5023"}],"author":[{"last_name":"Friesen","full_name":"Friesen, Maxim","first_name":"Maxim"},{"first_name":"Gajasri","last_name":"Karthikeyan","full_name":"Karthikeyan, Gajasri"},{"full_name":"Heiss, Stefan","first_name":"Stefan","id":"1031","last_name":"Heiss"},{"first_name":"Lukasz","last_name":"Wisniewski","full_name":"Wisniewski, Lukasz"},{"last_name":"Trsek","full_name":"Trsek, Henning","first_name":"Henning"}],"year":2019,"status":"public","title":"A comparative evaluation of security mechanisms in DDS, TLS and DTLS","publication_status":"published","citation":{"van":"Friesen M, Karthikeyan G, Heiss S, Wisniewski L, Trsek H. A comparative evaluation of security mechanisms in DDS, TLS and DTLS. In: Technologien für die intelligente Automation. Berlin, Heidelberg; 2019.","havard":"M. Friesen, G. Karthikeyan, S. Heiss, L. Wisniewski, H. Trsek, A comparative evaluation of security mechanisms in DDS, TLS and DTLS, in: Technologien Für Die Intelligente Automation, Berlin, Heidelberg, 2019.","bjps":"Friesen M et al. (2019) A Comparative Evaluation of Security Mechanisms in DDS, TLS and DTLS. Technologien Für Die Intelligente Automation. Berlin, Heidelberg.","mla":"Friesen, Maxim, et al. “A Comparative Evaluation of Security Mechanisms in DDS, TLS and DTLS.” Technologien Für Die Intelligente Automation, 2019, doi:10.1007/978-3-662-59895-5_15.","ufg":"Friesen, Maxim et. al. (2019): A comparative evaluation of security mechanisms in DDS, TLS and DTLS, in: Technologien für die intelligente Automation, Berlin, Heidelberg.","apa":"Friesen, M., Karthikeyan, G., Heiss, S., Wisniewski, L., & Trsek, H. (2019). A comparative evaluation of security mechanisms in DDS, TLS and DTLS. In Technologien für die intelligente Automation. Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-59895-5_15","chicago":"Friesen, Maxim, Gajasri Karthikeyan, Stefan Heiss, Lukasz Wisniewski, and Henning Trsek. “A Comparative Evaluation of Security Mechanisms in DDS, TLS and DTLS.” In Technologien Für Die Intelligente Automation. Berlin, Heidelberg, 2019. https://doi.org/10.1007/978-3-662-59895-5_15.","short":"M. Friesen, G. Karthikeyan, S. Heiss, L. Wisniewski, H. Trsek, in: Technologien Für Die Intelligente Automation, Berlin, Heidelberg, 2019.","chicago-de":"Friesen, Maxim, Gajasri Karthikeyan, Stefan Heiss, Lukasz Wisniewski und Henning Trsek. 2019. A comparative evaluation of security mechanisms in DDS, TLS and DTLS. In: Technologien für die intelligente Automation. Berlin, Heidelberg. doi:10.1007/978-3-662-59895-5_15, .","din1505-2-1":"Friesen, Maxim ; Karthikeyan, Gajasri ; Heiss, Stefan ; Wisniewski, Lukasz ; Trsek, Henning: A comparative evaluation of security mechanisms in DDS, TLS and DTLS. In: Technologien für die intelligente Automation. Berlin, Heidelberg, 2019","ama":"Friesen M, Karthikeyan G, Heiss S, Wisniewski L, Trsek H. A comparative evaluation of security mechanisms in DDS, TLS and DTLS. In: Technologien Für Die Intelligente Automation. Berlin, Heidelberg; 2019. doi:10.1007/978-3-662-59895-5_15","ieee":"M. Friesen, G. Karthikeyan, S. Heiss, L. Wisniewski, and H. Trsek, “A comparative evaluation of security mechanisms in DDS, TLS and DTLS,” in Technologien für die intelligente Automation, Berlin, Heidelberg, 2019."},"doi":"10.1007/978-3-662-59895-5_15","_id":"5590","language":[{"iso":"eng"}],"place":"Berlin, Heidelberg","type":"book_chapter","date_created":"2021-04-19T09:21:45Z","publication_identifier":{"issn":["2522-8579","2522-8587"],"isbn":["9783662598948","9783662598955"]},"publication":"Technologien für die intelligente Automation","date_updated":"2023-03-15T13:50:00Z","user_id":"10982"},{"status":"public","department":[{"_id":"DEP5000"},{"_id":"DEP5023"}],"author":[{"first_name":"Andreas","last_name":"Schmelter","full_name":"Schmelter, Andreas","id":"10982"},{"first_name":"Oliver","last_name":"Konradi","full_name":"Konradi, Oliver"},{"last_name":"Heiss","first_name":"Stefan","id":"1031","full_name":"Heiss, Stefan"}],"year":2019,"publication_status":"published","citation":{"chicago-de":"Schmelter, Andreas, Oliver Konradi und Stefan Heiss. 2019. Sichere Benutzerauthentifizierung mit mobilen Endgeräten in industriellen Anwendungen. In: Technologien für die intelligente Automation. Berlin, Heidelberg. doi:10.1007/978-3-662-59895-5_14, .","din1505-2-1":"Schmelter, Andreas ; Konradi, Oliver ; Heiss, Stefan: Sichere Benutzerauthentifizierung mit mobilen Endgeräten in industriellen Anwendungen. In: Technologien für die intelligente Automation. Berlin, Heidelberg, 2019","short":"A. Schmelter, O. Konradi, S. Heiss, in: Technologien Für Die Intelligente Automation, Berlin, Heidelberg, 2019.","chicago":"Schmelter, Andreas, Oliver Konradi, and Stefan Heiss. “Sichere Benutzerauthentifizierung Mit Mobilen Endgeräten in Industriellen Anwendungen.” In Technologien Für Die Intelligente Automation. Berlin, Heidelberg, 2019. https://doi.org/10.1007/978-3-662-59895-5_14.","apa":"Schmelter, A., Konradi, O., & Heiss, S. (2019). Sichere Benutzerauthentifizierung mit mobilen Endgeräten in industriellen Anwendungen. In Technologien für die intelligente Automation. Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-59895-5_14","havard":"A. Schmelter, O. Konradi, S. Heiss, Sichere Benutzerauthentifizierung mit mobilen Endgeräten in industriellen Anwendungen, in: Technologien Für Die Intelligente Automation, Berlin, Heidelberg, 2019.","mla":"Schmelter, Andreas, et al. “Sichere Benutzerauthentifizierung Mit Mobilen Endgeräten in Industriellen Anwendungen.” Technologien Für Die Intelligente Automation, 2019, doi:10.1007/978-3-662-59895-5_14.","bjps":"Schmelter A, Konradi O and Heiss S (2019) Sichere Benutzerauthentifizierung Mit Mobilen Endgeräten in Industriellen Anwendungen. Technologien Für Die Intelligente Automation. Berlin, Heidelberg.","ufg":"Schmelter, Andreas et. al. (2019): Sichere Benutzerauthentifizierung mit mobilen Endgeräten in industriellen Anwendungen, in: Technologien für die intelligente Automation, Berlin, Heidelberg.","van":"Schmelter A, Konradi O, Heiss S. Sichere Benutzerauthentifizierung mit mobilen Endgeräten in industriellen Anwendungen. In: Technologien für die intelligente Automation. Berlin, Heidelberg; 2019.","ieee":"A. Schmelter, O. Konradi, and S. Heiss, “Sichere Benutzerauthentifizierung mit mobilen Endgeräten in industriellen Anwendungen,” in Technologien für die intelligente Automation, Berlin, Heidelberg, 2019.","ama":"Schmelter A, Konradi O, Heiss S. Sichere Benutzerauthentifizierung mit mobilen Endgeräten in industriellen Anwendungen. In: Technologien Für Die Intelligente Automation. Berlin, Heidelberg; 2019. doi:10.1007/978-3-662-59895-5_14"},"title":"Sichere Benutzerauthentifizierung mit mobilen Endgeräten in industriellen Anwendungen","language":[{"iso":"eng"}],"place":"Berlin, Heidelberg","doi":"10.1007/978-3-662-59895-5_14","_id":"5591","date_updated":"2023-03-15T13:50:00Z","user_id":"10982","date_created":"2021-04-19T09:21:58Z","type":"book_chapter","publication_identifier":{"issn":["2522-8579","2522-8587"],"isbn":["9783662598948","9783662598955"]},"publication":"Technologien für die intelligente Automation"},{"language":[{"iso":"ger"}],"oa":"1","date_updated":"2023-03-15T13:50:01Z","file_date_updated":"2021-05-02T12:06:07Z","date_created":"2021-04-30T12:41:40Z","publication":"urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung","publication_identifier":{"issn":["2566-8900"]},"page":"80-90","status":"public","year":2019,"main_file_link":[{"url":"https://www.yumpu.com/de/document/read/63241976/urbanlab-magazin-2019-stadtlandquartier","open_access":"1"}],"author":[{"id":"27136","first_name":"Oliver","full_name":"Hall, Oliver","last_name":"Hall"},{"orcid":"0000-0002-8841-9345","last_name":"Cardinali","first_name":"Marcel","full_name":"Cardinali, Marcel","id":"58462"}],"citation":{"ama":"Hall O, Cardinali M. Stadt Land Quartier - Erkenntnisse aus dem Studierendenwettbewerb. urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung. 2019;(5):80-90.","ieee":"O. Hall and M. Cardinali, “Stadt Land Quartier - Erkenntnisse aus dem Studierendenwettbewerb,” urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung, no. 5, pp. 80–90, 2019.","van":"Hall O, Cardinali M. Stadt Land Quartier - Erkenntnisse aus dem Studierendenwettbewerb. urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung. 2019;(5):80–90.","bjps":"Hall O and Cardinali M (2019) Stadt Land Quartier - Erkenntnisse aus dem Studierendenwettbewerb. urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung 80–90.","havard":"O. Hall, M. Cardinali, Stadt Land Quartier - Erkenntnisse aus dem Studierendenwettbewerb, urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung. (2019) 80–90.","mla":"Hall, Oliver, and Marcel Cardinali. “Stadt Land Quartier - Erkenntnisse aus dem Studierendenwettbewerb.” urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung, no. 5, Technische Hochschule Ostwestfalen-Lippe, 2019, pp. 80–90.","ufg":"Hall, Oliver/Cardinali, Marcel (2019): Stadt Land Quartier - Erkenntnisse aus dem Studierendenwettbewerb, in: urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung (5), S. 80–90.","apa":"Hall, O., & Cardinali, M. (2019). Stadt Land Quartier - Erkenntnisse aus dem Studierendenwettbewerb. urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung, (5), 80–90.","chicago":"Hall, Oliver, and Marcel Cardinali. “Stadt Land Quartier - Erkenntnisse aus dem Studierendenwettbewerb.” urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung, no. 5 (2019): 80–90.","short":"O. Hall, M. Cardinali, urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung (2019) 80–90.","din1505-2-1":"Hall, Oliver ; Cardinali, Marcel: Stadt Land Quartier - Erkenntnisse aus dem Studierendenwettbewerb. In: urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung. Detmold, Technische Hochschule Ostwestfalen-Lippe (2019), Nr. 5, S. 80–90","chicago-de":"Hall, Oliver und Marcel Cardinali. 2019. Stadt Land Quartier - Erkenntnisse aus dem Studierendenwettbewerb. urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung, Nr. 5: 80–90."},"title":"Stadt Land Quartier - Erkenntnisse aus dem Studierendenwettbewerb","place":"Detmold","_id":"5732","has_accepted_license":"1","popular_science":"1","user_id":"45673","type":"journal_article","publisher":"Technische Hochschule Ostwestfalen-Lippe","department":[{"_id":"DEP1303"},{"_id":"DEP1055"}],"ddc":["050"],"issue":"5","file":[{"access_level":"open_access","success":1,"relation":"main_file","creator":"edu-dd0","date_updated":"2021-05-02T12:06:07Z","file_id":"5773","file_size":2478763,"content_type":"application/pdf","date_created":"2021-05-02T12:06:07Z","file_name":"Stadt Land Quartier - Erkenntnisse aus dem Studierendenwettbewerb.pdf"}],"publication_status":"published"},{"citation":{"din1505-2-1":"Cardinali, Marcel ; Hall, Oliver: Stadt Land Quartier (Editorial). In: urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung. Detmold, Technische Hochschule Ostwestfalen-Lippe (2019), Nr. 5, S. 3","chicago-de":"Cardinali, Marcel und Oliver Hall. 2019. Stadt Land Quartier (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung, Nr. 5: 3.","short":"M. Cardinali, O. Hall, urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung (2019) 3.","chicago":"Cardinali, Marcel, and Oliver Hall. “Stadt Land Quartier (Editorial).” urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung, no. 5 (2019): 3.","apa":"Cardinali, M., & Hall, O. (2019). Stadt Land Quartier (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung, (5), 3.","ufg":"Cardinali, Marcel/Hall, Oliver (2019): Stadt Land Quartier (Editorial), in: urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung (5), S. 3.","mla":"Cardinali, Marcel, and Oliver Hall. “Stadt Land Quartier (Editorial).” urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung, no. 5, Technische Hochschule Ostwestfalen-Lippe, 2019, p. 3.","havard":"M. Cardinali, O. Hall, Stadt Land Quartier (Editorial), urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung. (2019) 3.","bjps":"Cardinali M and Hall O (2019) Stadt Land Quartier (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung 3.","van":"Cardinali M, Hall O. Stadt Land Quartier (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung. 2019;(5):3.","ieee":"M. Cardinali and O. Hall, “Stadt Land Quartier (Editorial),” urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung, no. 5, p. 3, 2019.","ama":"Cardinali M, Hall O. Stadt Land Quartier (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung. 2019;(5):3."},"title":"Stadt Land Quartier (Editorial)","page":"3","status":"public","year":2019,"author":[{"last_name":"Cardinali","first_name":"Marcel","id":"58462","full_name":"Cardinali, Marcel","orcid":"0000-0002-8841-9345"},{"first_name":"Oliver","full_name":"Hall, Oliver","id":"27136","last_name":"Hall"}],"main_file_link":[{"url":"https://www.yumpu.com/de/document/read/63241976/urbanlab-magazin-2019-stadtlandquartier","open_access":"1"}],"file_date_updated":"2021-05-02T12:01:38Z","date_updated":"2023-03-15T13:50:01Z","date_created":"2021-04-30T12:41:43Z","publication_identifier":{"issn":["2566-8900"]},"publication":"urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung","language":[{"iso":"ger"}],"oa":"1","file":[{"success":1,"access_level":"open_access","date_created":"2021-05-02T12:01:38Z","content_type":"application/pdf","file_name":"Stadt Land Quartier (Editorial).pdf","file_size":113364,"file_id":"5772","date_updated":"2021-05-02T12:01:38Z","relation":"main_file","creator":"edu-dd0"}],"publication_status":"published","publisher":"Technische Hochschule Ostwestfalen-Lippe","issue":"5","department":[{"_id":"DEP1303"},{"_id":"DEP1055"}],"ddc":["050"],"user_id":"45673","type":"journal_article","_id":"5734","place":"Detmold","has_accepted_license":"1"},{"popular_science":"1","user_id":"45673","type":"journal_article","place":"Detmold","_id":"5736","has_accepted_license":"1","file":[{"access_level":"open_access","success":1,"creator":"edu-dd0","relation":"main_file","date_updated":"2021-05-02T11:48:35Z","file_id":"5771","file_size":8470382,"date_created":"2021-05-02T11:48:35Z","content_type":"application/pdf","file_name":"Quartier der kurzen Wege.pdf"}],"publication_status":"published","publisher":"Technische Hochschule Ostwestfalen-Lippe","department":[{"_id":"DEP1303"},{"_id":"DEP1055"}],"ddc":["050"],"abstract":[{"lang":"ger","text":"Ein Blick auf Deutschland von oben und in unsere Planungswerkzeuge wie die BauNVO zeigt, auch Jahrzehnte nach dem Leitbild der Stadt der kurzen Wege abseits von Innenstädten und so mancher Großstadt, noch das Bild einer sortierten Stadt. Die Gegenbewegung zur autogerechten Stadt setzte in den 1980er Jahren ein und verfolgt im Kern ein diametral entgegengesetztes Ziel – die fußläufige Stadt. Doch auch über 30 Jahre später zeigt sich abseits der Innenstädte in den umliegenden Stadtteilen und Dörfern noch ein ernüchterndes monofunktionales Bild. Dabei sind es genau diese räumlichen Einheiten, die in etwa dem fußläufigen Bewegungsradius seiner Bewohner entsprechen. Hier - von der eigenen Wohnung aus erreichbar - braucht es Angebote für die Ziele des Alltags. Inzwischen belegen zahlreiche Studien die Möglichkeiten und Vorteile kompakter nutzungsgemischter Quartiere in ökologischer, sozialer und ökonomischer Hinsicht. Diese Größeneinheit hat ein prominentes Vorbild: Die mittelalterliche europäische Stadt. Mit diesem Perspektivwechsel wird die Stadt von vorgestern zur Vorlage für das Quartier von übermorgen.\r\n\r\nZweitveröffentlichung bei polis: https://polis-magazin.com/2019/10/quartier-der-kurzen-wege-die-stadt-von-vorgestern-als-quartier-von-uebermorgen/\r\n\r\n"}],"issue":"5","date_updated":"2023-03-15T13:50:01Z","file_date_updated":"2021-05-02T11:48:35Z","date_created":"2021-04-30T12:41:46Z","publication_identifier":{"issn":["2566-8900"]},"publication":"urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung","language":[{"iso":"ger"}],"keyword":["Quartiersentwicklung","Nachhaltigkeit","Stadt der kurzen Wege","Doppelte Innenentwicklung","Nature-based Solutions","Lebensqualität"],"oa":"1","citation":{"chicago-de":"Cardinali, Marcel. 2019. Quartier der kurzen Wege - Die Stadt von vorgestern ist das Quartier von übermorgen. urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung, Nr. 5: 26–37.","din1505-2-1":"Cardinali, Marcel: Quartier der kurzen Wege - Die Stadt von vorgestern ist das Quartier von übermorgen. In: urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung. Detmold, Technische Hochschule Ostwestfalen-Lippe (2019), Nr. 5, S. 26–37","short":"M. Cardinali, urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung (2019) 26–37.","chicago":"Cardinali, Marcel. “Quartier der kurzen Wege - Die Stadt von vorgestern ist das Quartier von übermorgen.” urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung, no. 5 (2019): 26–37.","ieee":"M. Cardinali, “Quartier der kurzen Wege - Die Stadt von vorgestern ist das Quartier von übermorgen,” urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung, no. 5, pp. 26–37, 2019.","apa":"Cardinali, M. (2019). Quartier der kurzen Wege - Die Stadt von vorgestern ist das Quartier von übermorgen. urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung, (5), 26–37.","mla":"Cardinali, Marcel. “Quartier der kurzen Wege - Die Stadt von vorgestern ist das Quartier von übermorgen.” urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung, no. 5, Technische Hochschule Ostwestfalen-Lippe, 2019, pp. 26–37.","havard":"M. Cardinali, Quartier der kurzen Wege - Die Stadt von vorgestern ist das Quartier von übermorgen, urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung. (2019) 26–37.","bjps":"Cardinali M (2019) Quartier der kurzen Wege - Die Stadt von vorgestern ist das Quartier von übermorgen. urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung 26–37.","ufg":"Cardinali, Marcel (2019): Quartier der kurzen Wege - Die Stadt von vorgestern ist das Quartier von übermorgen, in: urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung (5), S. 26–37.","ama":"Cardinali M. Quartier der kurzen Wege - Die Stadt von vorgestern ist das Quartier von übermorgen. urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung. 2019;(5):26-37.","van":"Cardinali M. Quartier der kurzen Wege - Die Stadt von vorgestern ist das Quartier von übermorgen. urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung. 2019;(5):26–37."},"title":"Quartier der kurzen Wege - Die Stadt von vorgestern ist das Quartier von übermorgen","page":"26-37","status":"public","main_file_link":[{"url":"https://www.yumpu.com/de/document/read/63241976/urbanlab-magazin-2019-stadtlandquartier","open_access":"1"}],"author":[{"orcid":"0000-0002-8841-9345","id":"58462","first_name":"Marcel","full_name":"Cardinali, Marcel","last_name":"Cardinali"}],"year":2019},{"title":"Potentialstudie Kreativ Quartier Detmold","publication_status":"published","citation":{"chicago":"Cardinali, Marcel, Oliver Hall, and Julia Krick. Potentialstudie Kreativ Quartier Detmold. Detmold: Technische Hochschule Ostwestfalen-Lippe, 2019.","apa":"Cardinali, M., Hall, O., & Krick, J. (2019). Potentialstudie Kreativ Quartier Detmold. Detmold: Technische Hochschule Ostwestfalen-Lippe.","havard":"M. Cardinali, O. Hall, J. Krick, Potentialstudie Kreativ Quartier Detmold, Technische Hochschule Ostwestfalen-Lippe, Detmold, 2019.","bjps":"Cardinali M, Hall O and Krick J (2019) Potentialstudie Kreativ Quartier Detmold. Detmold: Technische Hochschule Ostwestfalen-Lippe.","mla":"Cardinali, Marcel, et al. Potentialstudie Kreativ Quartier Detmold. Technische Hochschule Ostwestfalen-Lippe, 2019.","ufg":"Cardinali, Marcel et. al. (2019): Potentialstudie Kreativ Quartier Detmold, Detmold.","van":"Cardinali M, Hall O, Krick J. Potentialstudie Kreativ Quartier Detmold. Detmold: Technische Hochschule Ostwestfalen-Lippe; 2019. 152 p.","chicago-de":"Cardinali, Marcel, Oliver Hall und Julia Krick. 2019. Potentialstudie Kreativ Quartier Detmold. Detmold: Technische Hochschule Ostwestfalen-Lippe.","din1505-2-1":"Cardinali, Marcel ; Hall, Oliver ; Krick, Julia: Potentialstudie Kreativ Quartier Detmold. Detmold : Technische Hochschule Ostwestfalen-Lippe, 2019","short":"M. Cardinali, O. Hall, J. Krick, Potentialstudie Kreativ Quartier Detmold, Technische Hochschule Ostwestfalen-Lippe, Detmold, 2019.","ieee":"M. Cardinali, O. Hall, and J. Krick, Potentialstudie Kreativ Quartier Detmold. Detmold: Technische Hochschule Ostwestfalen-Lippe, 2019.","ama":"Cardinali M, Hall O, Krick J. Potentialstudie Kreativ Quartier Detmold. Detmold: Technische Hochschule Ostwestfalen-Lippe; 2019."},"department":[{"_id":"DEP1303"},{"_id":"DEP1055"}],"main_file_link":[{"open_access":"1","url":"https://www.th-owl.de/files/webs/gestaltung/download/11_Forschung/urbanLab/02_Projekte/Kreativ_Quartier/KQD_Studie_Abschlussbericht_web_reduzierte_Aufloesung.pdf"}],"author":[{"full_name":"Cardinali, Marcel","first_name":"Marcel","id":"58462","last_name":"Cardinali","orcid":"0000-0002-8841-9345"},{"first_name":"Oliver","last_name":"Hall","id":"27136","full_name":"Hall, Oliver"},{"first_name":"Julia","id":"58606","last_name":"Krick","full_name":"Krick, Julia"}],"year":2019,"publisher":"Technische Hochschule Ostwestfalen-Lippe","page":"152","status":"public","type":"report_science","date_created":"2021-04-30T12:42:03Z","date_updated":"2023-03-15T13:50:01Z","user_id":"45673","oa":"1","_id":"5747","language":[{"iso":"eng"}],"keyword":["Stadtentwicklung","Kreative","Hochschulentwicklung","Umfrage","Machbarkeitsstudie","Fallstudienanalyse"],"place":"Detmold"},{"title":"Tangible Data – Informationen greifbar machen","publication_status":"published","citation":{"apa":"Häusler, A. (2019). Tangible Data – Informationen greifbar machen. Design-Dialoge-Detmold, Detmold.","chicago":"Häusler, Axel. “Tangible Data – Informationen greifbar machen,” 2019.","van":"Häusler A. Tangible Data – Informationen greifbar machen. In 2019.","bjps":"Häusler A (2019) Tangible Data – Informationen greifbar machen.","mla":"Häusler, Axel. Tangible Data – Informationen greifbar machen. 2019.","havard":"A. Häusler, Tangible Data – Informationen greifbar machen, in: 2019.","ufg":"Häusler, Axel: Tangible Data – Informationen greifbar machen, in: o. Hg.: o. O. 2019.","short":"A. Häusler, in: 2019.","chicago-de":"Häusler, Axel. 2019. Tangible Data – Informationen greifbar machen. In: .","din1505-2-1":"Häusler, Axel: Tangible Data – Informationen greifbar machen. In: , 2019","ieee":"A. Häusler, “Tangible Data – Informationen greifbar machen,” presented at the Design-Dialoge-Detmold, Detmold, 2019.","ama":"Häusler A. Tangible Data – Informationen greifbar machen. In: ; 2019."},"department":[{"_id":"DEP1055"},{"_id":"DEP1025"},{"_id":"DEP1028"}],"conference":{"start_date":"2019-04-04","end_date":"2019-04-04","name":"Design-Dialoge-Detmold","location":"Detmold"},"author":[{"full_name":"Häusler, Axel","last_name":"Häusler","first_name":"Axel","id":"61520","orcid":"0009-0001-8565-8199"}],"year":"2019","status":"public","date_created":"2021-05-02T11:31:54Z","type":"conference_abstract","related_material":{"link":[{"relation":"confirmation","url":"https://www.designdialogedetmold.de/d4-abstract-häusler"}]},"date_updated":"2024-12-04T13:00:11Z","user_id":"83781","language":[{"iso":"ger"}],"_id":"5767"},{"year":"2019","author":[{"orcid":"0009-0001-8565-8199","full_name":"Häusler, Axel","first_name":"Axel","id":"61520","last_name":"Häusler"}],"conference":{"location":"Detmold","name":"SCHÜCO-Master-Workshop"},"department":[{"_id":"DEP1055"},{"_id":"DEP1025"},{"_id":"DEP1028"}],"status":"public","title":"Artificial Intelligence & Space","citation":{"short":"A. Häusler, in: SCHÜCO-Master-Workshop, 2019.","din1505-2-1":"Häusler, Axel: Artificial Intelligence & Space. In: SCHÜCO-Master-Workshop, 2019","chicago-de":"Häusler, Axel. 2019. Artificial Intelligence & Space. In: SCHÜCO-Master-Workshop.","van":"Häusler A. Artificial Intelligence & Space. In: SCHÜCO-Master-Workshop. 2019.","bjps":"Häusler A (2019) Artificial Intelligence & Space. SCHÜCO-Master-Workshop.","havard":"A. Häusler, Artificial Intelligence & Space, in: SCHÜCO-Master-Workshop, 2019.","mla":"Häusler, Axel. “Artificial Intelligence & Space.” SCHÜCO-Master-Workshop, 2019.","ufg":"Häusler, Axel: Artificial Intelligence & Space, in: o. Hg.: SCHÜCO-Master-Workshop, o. O. 2019.","apa":"Häusler, A. (2019). Artificial Intelligence & Space. SCHÜCO-Master-Workshop. SCHÜCO-Master-Workshop, Detmold.","chicago":"Häusler, Axel. “Artificial Intelligence & Space.” In SCHÜCO-Master-Workshop, 2019.","ama":"Häusler A. Artificial Intelligence & Space. In: SCHÜCO-Master-Workshop. ; 2019.","ieee":"A. Häusler, “Artificial Intelligence & Space,” presented at the SCHÜCO-Master-Workshop, Detmold, 2019."},"publication_status":"published","_id":"5891","language":[{"iso":"eng"}],"publication":"SCHÜCO-Master-Workshop","date_created":"2021-05-13T19:51:32Z","type":"conference_abstract","user_id":"83781","date_updated":"2024-12-04T13:00:40Z"},{"user_id":"83781","type":"conference","_id":"6003","place":"Magdeburg","publication_status":"published","quality_controlled":"1","publisher":"Otto-von-Guericke-Universität Magdeburg. R-PÖ","abstract":[{"lang":"ger","text":"In industriellen Szenarien wächst seit Längerem der Bedarf an drahtloser und zuverlässiger Kommunikation. Es gibt hierzu einige aus der IT-Welt adaptierte Standards, welche in vielen Anwendungen im industriellen Umfeld nicht ausreichen. Daher wurde bei der Spezifikation des neuen 5G-Standards explizit die Nutzung im industriellen Umfeld mit berücksichtigt. Diese Arbeit beschäftigt sich mit den Vorteilen der Multi-Connectivity (MC), welche sich durch die Architektur des neuen 5G-NR Standards in der Automatisierungstechnik ergeben können. Hierzu wurden im ersten Schritt Funkkanalmessungen in einer industrienahen Umgebung – der SmartFactoryOWL – durchgeführt, und im weiteren Verlauf die MC in einen Kommunikationsstack integriert und die Zuverlässigkeit (Reliability) (REL) bei verschiedenen MCKonfigurationen ermittelt. Im praktischen Aufbau konnte eine erhöhte REL der drahtlosen Kommunikation im industriellen Kontext unter Einsatz der MC nachgewiesen werden."}],"conference":{"location":"Magdeburg","name":"2019 Kommunikation in der Automation (KommA)","start_date":"2019-11-20","end_date":"2019-11-21"},"department":[{"_id":"DEP5023"},{"_id":"DEP5010"}],"ddc":["000"],"editor":[{"last_name":"Jumar","first_name":"Ulrich","full_name":"Jumar, Ulrich"},{"last_name":"Jasperneite","first_name":"Jürgen","full_name":"Jasperneite, Jürgen"}],"corporate_editor":["Institut für Automation und Kommunikation e.V."],"date_updated":"2023-08-14T13:16:56Z","date_created":"2021-06-22T09:34:20Z","publication":"KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium \"Kommunikation in der Automation\"","publication_identifier":{"isbn":["978-3-944722-85-6"]},"language":[{"iso":"ger"}],"keyword":["5G","Multi-Connectivity","Zuverlässigkeit"],"citation":{"chicago-de":"Fliedner, Niels Hendrik, Roland Heß und Stefan Witte. 2019. Multi-Connectivity in 5G Industrial Environments. In: KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium „Kommunikation in der Automation“, hg. von Ulrich Jumar, Jürgen Jasperneite, und Institut für Automation und Kommunikation e.V. Magdeburg: Otto-von-Guericke-Universität Magdeburg. R-PÖ.","din1505-2-1":"Fliedner, Niels Hendrik ; Heß, Roland ; Witte, Stefan: Multi-Connectivity in 5G Industrial Environments. In: Jumar, U. ; Jasperneite, J. ; Institut für Automation und Kommunikation e.V. (Hrsg.): KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium „Kommunikation in der Automation“. Magdeburg : Otto-von-Guericke-Universität Magdeburg. R-PÖ, 2019","short":"N.H. Fliedner, R. Heß, S. Witte, in: U. Jumar, J. Jasperneite, Institut für Automation und Kommunikation e.V. (Eds.), KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium “Kommunikation in der Automation,” Otto-von-Guericke-Universität Magdeburg. R-PÖ, Magdeburg, 2019.","chicago":"Fliedner, Niels Hendrik, Roland Heß, and Stefan Witte. “Multi-Connectivity in 5G Industrial Environments.” In KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium “Kommunikation in der Automation,” edited by Ulrich Jumar, Jürgen Jasperneite, and Institut für Automation und Kommunikation e.V. Magdeburg: Otto-von-Guericke-Universität Magdeburg. R-PÖ, 2019.","ieee":"N. H. Fliedner, R. Heß, and S. Witte, “Multi-Connectivity in 5G Industrial Environments,” in KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium “Kommunikation in der Automation,” Magdeburg, 2019.","apa":"Fliedner, N. H., Heß, R., & Witte, S. (2019). Multi-Connectivity in 5G Industrial Environments. In U. Jumar, J. Jasperneite, & Institut für Automation und Kommunikation e.V. (Eds.), KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium “Kommunikation in der Automation.” Otto-von-Guericke-Universität Magdeburg. R-PÖ.","havard":"N.H. Fliedner, R. Heß, S. Witte, Multi-Connectivity in 5G Industrial Environments, in: U. Jumar, J. Jasperneite, Institut für Automation und Kommunikation e.V. (Eds.), KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium “Kommunikation in der Automation,” Otto-von-Guericke-Universität Magdeburg. R-PÖ, Magdeburg, 2019.","mla":"Fliedner, Niels Hendrik, et al. “Multi-Connectivity in 5G Industrial Environments.” KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium “Kommunikation in der Automation,” edited by Ulrich Jumar et al., Otto-von-Guericke-Universität Magdeburg. R-PÖ, 2019.","bjps":"Fliedner NH, Heß R and Witte S (2019) Multi-Connectivity in 5G Industrial Environments. In Jumar U, Jasperneite J, and Institut für Automation und Kommunikation e.V. (eds), KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium ‘Kommunikation in der Automation’. Magdeburg: Otto-von-Guericke-Universität Magdeburg. R-PÖ.","ufg":"Fliedner, Niels Hendrik/Heß, Roland/Witte, Stefan: Multi-Connectivity in 5G Industrial Environments, in: Jumar, Ulrich/Jasperneite, Jürgen, Institut für Automation und Kommunikation e.V. (Hgg.): KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium „Kommunikation in der Automation“, Magdeburg 2019.","ama":"Fliedner NH, Heß R, Witte S. Multi-Connectivity in 5G Industrial Environments. In: Jumar U, Jasperneite J, Institut für Automation und Kommunikation e.V., eds. KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium “Kommunikation in der Automation.” Otto-von-Guericke-Universität Magdeburg. R-PÖ; 2019.","van":"Fliedner NH, Heß R, Witte S. Multi-Connectivity in 5G Industrial Environments. In: Jumar U, Jasperneite J, Institut für Automation und Kommunikation e.V., editors. KommA 2019 : Kommunikation in der Automation : 20-21112019 : 10 Jahreskolloquium “Kommunikation in der Automation.” Magdeburg: Otto-von-Guericke-Universität Magdeburg. R-PÖ; 2019."},"extern":"1","title":"Multi-Connectivity in 5G Industrial Environments","status":"public","year":"2019","author":[{"last_name":"Fliedner","full_name":"Fliedner, Niels Hendrik","id":"57956","first_name":"Niels Hendrik","orcid":"0000-0003-0484-1328"},{"full_name":"Heß, Roland","first_name":"Roland","last_name":"Heß"},{"first_name":"Stefan","last_name":"Witte","full_name":"Witte, Stefan","id":"1605"}],"main_file_link":[{"url":"https://tydirium.init.th-owl.de/s/ErCo2mjFdJQDoXN?dir=undefined&path=%2FKommA%202019%2FPaper%2FSession1_Funk&openfile=7286659"}]},{"type":"conference_editor","user_id":"45673","has_accepted_license":"1","doi":"10.25644/ehew-9179","_id":"1101","place":"Lemgo","publication_status":"published","file":[{"success":1,"access_level":"open_access","content_type":"application/pdf","file_name":"Conference-Proceedings_final_komprimiert.pdf","date_created":"2019-05-02T10:57:51Z","file_size":32437594,"file_id":"1105","date_updated":"2019-05-02T10:57:51Z","relation":"main_file","creator":"hka-zn8"}],"abstract":[{"lang":"eng","text":"DOCOMOMO Germany with the Detmold School of Architecture and Interior Architecture, Ostwestfalen-Lippe University of Applied Sciences (OWL UAS) and the EU project ‘Reuse of Modernist Buildings‘ (RMB) invite you to the 16th DOCOMOMO Germany and 3rd RMB Conference.\r\nThe International Conference in Berlin takes the 100th anniversary of the Bauhaus as an opportunity to discuss the significance of modernity in the 21st century. The conference focus will be on the concepts, visions, and impulses emanating from Modern Movement and how they can be related to today’s social, economic, cultural and in particular creative issues.\r\n\r\nAre the social, spatial and constructional concepts formulated by modern movement and post-war modernism still sustainable today?\r\nWhat role do cultural and climatic conditions play in the preservation, renovation and transformation of spaces, buildings, and modern\r\nmovement sites?\r\nHow can the basic ideas of classical modernism be continued 100 years later and thus contribute to solving current challenges?\r\nWhat contribution can be expected from academic and professional education, and which learning formats are suitable for this?\r\n\r\nThe 2019 DOCOMOMO Germany event will move from Karlsruhe and be held for the first time in Berlin, Neukölln at the Werkstatt der Kulturen. It continues the tradition of the Karlsruhe DOCOMOMO Germany Conference. This year the conference is co-organised by ‘RMB‘, a project that is funded by the EU and coordinated by the OWL University of Applied Sciences. RMB initiates a pedagogical framework on a European level on the reuse of modernist buildings based on common definitions, methods, and approaches. RMB prepares a Joint Master on Reuse of Modernist Buildings. This cooperation of DOCOMOMO Germany and RMB resulted in a new conference format: a combination of invited keynote speakers and selected scientific lectures under the theme of ‘What interest do we take in the Modern Movement today?‘."}],"department":[{"_id":"DEP1000"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"conference":{"end_date":"2019-03-01","start_date":"2019-03-01","name":"16th Docomomo Germany, 3 RMB Conference","location":"Berlin"},"ddc":["720"],"date_created":"2019-04-25T12:25:45Z","publication_identifier":{"eisbn":["978-3-00-062580-0"]},"editor":[{"full_name":"Melenhorst, Michael","first_name":"Michael","id":"51438","last_name":"Melenhorst"},{"first_name":"Uta","last_name":"Pottgiesser","full_name":"Pottgiesser, Uta","id":"27166","orcid":"0000-0002-8594-3168"},{"full_name":"Kellner, Theresa","id":"52011","first_name":"Theresa","last_name":"Kellner"},{"last_name":"Jaschke ","full_name":"Jaschke , Franz","first_name":"Franz"}],"file_date_updated":"2019-05-02T10:57:51Z","corporate_editor":["Hochschule Ostwestfalen-Lippe","Docomomo Deutschland e.V."],"related_material":{"record":[{"id":"3634","relation":"other","status":"public"}]},"date_updated":"2023-03-15T13:49:34Z","oa":"1","language":[{"iso":"eng"}],"title":"100 Years Bauhaus. What Interest Do We Take In Modern Movement Today?","citation":{"ieee":"M. Melenhorst, U. Pottgiesser, T. Kellner, F. Jaschke , and Hochschule Ostwestfalen-Lippe, Eds., 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? Lemgo, 2019, p. 475.","ama":"Melenhorst M, Pottgiesser U, Kellner T, Jaschke F, Hochschule Ostwestfalen-Lippe, eds. 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? Lemgo; 2019:475. doi:10.25644/ehew-9179","short":"M. Melenhorst, U. Pottgiesser, T. Kellner, F. Jaschke , Hochschule Ostwestfalen-Lippe, eds., 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today?, Lemgo, 2019.","din1505-2-1":"Melenhorst, M. ; Pottgiesser, U. ; Kellner, T. ; Jaschke , F. ; Hochschule Ostwestfalen-Lippe (Hrsg.): 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? Lemgo, 2019","chicago-de":"Melenhorst, Michael, Uta Pottgiesser, Theresa Kellner, Franz Jaschke und Hochschule Ostwestfalen-Lippe, Hrsg. 2019. 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? Lemgo. doi:10.25644/ehew-9179, .","apa":"Melenhorst, M., Pottgiesser, U., Kellner, T., Jaschke , F., & Hochschule Ostwestfalen-Lippe (Eds.). (2019). 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? (p. 475). Presented at the 16th Docomomo Germany, 3 RMB Conference, Lemgo. https://doi.org/10.25644/ehew-9179","chicago":"Melenhorst, Michael, Uta Pottgiesser, Theresa Kellner, Franz Jaschke , and Hochschule Ostwestfalen-Lippe, eds. 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? Lemgo, 2019. https://doi.org/10.25644/ehew-9179.","van":"Melenhorst M, Pottgiesser U, Kellner T, Jaschke F, Hochschule Ostwestfalen-Lippe, editors. 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? Lemgo; 2019.","ufg":"Melenhorst, Michael et. al. (Hgg.) (2019): 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today?, Lemgo.","bjps":"Melenhorst M et al. (eds) (2019) 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? Lemgo.","mla":"Melenhorst, Michael, et al., editors. 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today? 2019, p. 475, doi:10.25644/ehew-9179.","havard":"M. Melenhorst, U. Pottgiesser, T. Kellner, F. Jaschke , Hochschule Ostwestfalen-Lippe, eds., 100 Years Bauhaus. What Interest Do We Take In Modern Movement Today?, Lemgo, 2019."},"year":2019,"page":"475","status":"public"},{"conference":{"end_date":"2019-03-21","start_date":"2019-03-18","location":"Garching b. München","name":" 2019 International Conference on Networked Systems (NetSys)"},"department":[{"_id":"DEP5023"}],"year":"2019","author":[{"last_name":"Ehrlich","first_name":"Marco","id":"61562","full_name":"Ehrlich, Marco"},{"first_name":"Martin","full_name":"Gergeleit, Martin","last_name":"Gergeleit"},{"full_name":"Simkin, Kostyantyn","first_name":"Kostyantyn","last_name":"Simkin"},{"orcid":"0000-0002-0133-0656","last_name":"Trsek","full_name":"Trsek, Henning","id":"1486","first_name":"Henning"}],"abstract":[{"text":"Due to the dynamic nature of the Industrie 4.0, future production systems will be reconfigured frequently and as a part of the engineering process, new system configurations will be deployed automatically. In order to keep pace with this development, it will be required to achieve the needed security levels in an automated way and to reduce the current static procedures and manual efforts as much as possible. Therefore, the development and modelling of all cyber security related functionalities is needed. This paper describes an approach for such a modelling based on security requirements and levels of the international standard IEC 62443 part 3-3 and a system description based on OASIS TOSCA for the deployment. The approach is applied to an Industrie 4.0 use case scenario based on edge cloud computing and an evaluation is performed to demonstrate its feasibility.","lang":"eng"}],"status":"public","publisher":"IEEE","title":"Automated Processing of Security Requirements and Controls for a common Industrie 4.0 Use Case","publication_status":"published","citation":{"ieee":"M. Ehrlich, M. Gergeleit, K. Simkin, and H. Trsek, Automated Processing of Security Requirements and Controls for a common Industrie 4.0 Use Case. Piscataway, NJ: IEEE, 2019. doi: 10.1109/netsys.2019.8854522.","ama":"Ehrlich M, Gergeleit M, Simkin K, Trsek H. Automated Processing of Security Requirements and Controls for a Common Industrie 4.0 Use Case. IEEE; 2019. doi:10.1109/netsys.2019.8854522","chicago":"Ehrlich, Marco, Martin Gergeleit, Kostyantyn Simkin, and Henning Trsek. Automated Processing of Security Requirements and Controls for a Common Industrie 4.0 Use Case. 2019 International Conference on Networked Systems (NetSys). Piscataway, NJ: IEEE, 2019. https://doi.org/10.1109/netsys.2019.8854522.","apa":"Ehrlich, M., Gergeleit, M., Simkin, K., & Trsek, H. (2019). Automated Processing of Security Requirements and Controls for a common Industrie 4.0 Use Case. In 2019 International Conference on Networked Systems (NetSys). 2019 International Conference on Networked Systems (NetSys), Garching b. München. IEEE. https://doi.org/10.1109/netsys.2019.8854522","bjps":"Ehrlich M et al. (2019) Automated Processing of Security Requirements and Controls for a Common Industrie 4.0 Use Case. Piscataway, NJ: IEEE.","havard":"M. Ehrlich, M. Gergeleit, K. Simkin, H. Trsek, Automated Processing of Security Requirements and Controls for a common Industrie 4.0 Use Case, IEEE, Piscataway, NJ, 2019.","mla":"Ehrlich, Marco, et al. “Automated Processing of Security Requirements and Controls for a Common Industrie 4.0 Use Case.” 2019 International Conference on Networked Systems (NetSys), IEEE, 2019, https://doi.org/10.1109/netsys.2019.8854522.","ufg":"Ehrlich, Marco u. a.: Automated Processing of Security Requirements and Controls for a common Industrie 4.0 Use Case, Piscataway, NJ 2019.","van":"Ehrlich M, Gergeleit M, Simkin K, Trsek H. Automated Processing of Security Requirements and Controls for a common Industrie 4.0 Use Case. 2019 International Conference on Networked Systems (NetSys). Piscataway, NJ: IEEE; 2019.","chicago-de":"Ehrlich, Marco, Martin Gergeleit, Kostyantyn Simkin und Henning Trsek. 2019. Automated Processing of Security Requirements and Controls for a common Industrie 4.0 Use Case. 2019 International Conference on Networked Systems (NetSys). Piscataway, NJ: IEEE. doi:10.1109/netsys.2019.8854522, .","din1505-2-1":"Ehrlich, Marco ; Gergeleit, Martin ; Simkin, Kostyantyn ; Trsek, Henning: Automated Processing of Security Requirements and Controls for a common Industrie 4.0 Use Case. Piscataway, NJ : IEEE, 2019","short":"M. Ehrlich, M. Gergeleit, K. Simkin, H. Trsek, Automated Processing of Security Requirements and Controls for a Common Industrie 4.0 Use Case, IEEE, Piscataway, NJ, 2019."},"language":[{"iso":"eng"}],"place":"Piscataway, NJ","doi":"10.1109/netsys.2019.8854522","_id":"11143","type":"conference_editor_article","date_created":"2024-03-01T08:27:33Z","publication":"2019 International Conference on Networked Systems (NetSys)","publication_identifier":{"isbn":["978-1-7281-0569-7"],"eisbn":["978-1-7281-0568-0"]},"date_updated":"2024-03-11T15:38:09Z","user_id":"83781"},{"publication_status":"published","series_title":"VDI-Berichte","publisher":"VDI Verlag GmbH","abstract":[{"text":"Die vertikale und horizontale Integration von Automatisierungssystemen bilden das Funda-\r\nment zukünftiger Automatisierungsstrukturen im Sinne von Industrie 4.0. Das bedeutet, dass\r\ndie Kommunikation der Systemkomponenten nicht, wie bisher, auf bestimmte Bereiche be-\r\nschränkt, sondern bereichsübergreifend innerhalb eines Unternehmens und sogar über des-\r\nsen Grenzen hinweg stattfinden wird. Die damit einhergehende Problematik ist zum einen\r\ndie fehlende Interoperabilität, und zum anderen die Angreifbarkeit dieser offenen Netzwerke\r\ndurch mangelnde IT-Sicherheit. Einen wesentlichen Faktor für die Gewährleistung der In-\r\nteroperabilität stellen sogenannte Middleware-Protokolle dar. Eine Middleware liefert einen\r\nSoftware- und Hardware-unabhängigen Kommunikationsansatz [1]. Verschiedene Middle-\r\nware-Lösungen verwenden dabei unterschiedliche Ansätze, um eine vertrauenswürdige\r\nKommunikation sicherzustellen. Eine parallele Nutzung verschiedener Middleware-Lösungen\r\nist in vielen Fällen nicht zu vermeiden, da unterschiedliche Lieferanten Komponenten mit\r\nunterschiedlichen Protokollen in Anlagen liefern werden. Die parallele Nutzung verschiede-\r\nner Protokolle impliziert einen höheren organisatorischen Aufwand bezüglich der IT-\r\nSicherheit. In diesem Beitrag werden die Middleware-Protokolle DDS, MQTT und OPC UA\r\ninsbesondere in Bezug auf ihre IT-sicherheitsrelevanten Eigenschaften vorgestellt. Auf die-\r\nser Grundlage und einer Analyse von IT-Sicherheitsanforderungen der Industrie, wird zu-\r\nnächst ein Ansatz für eine einheitliche Sicherheitsinfrastruktur auf Basis einer Public-Key-\r\nInfrastruktur für alle drei Protokolle konzipiert. Diese wird durch Attributzertifikate als zusätz-\r\nliche Autorisierungskomponente erweitert und evaluiert.","lang":"eng"}],"department":[{"_id":"DEP5023"}],"conference":{"location":"Baden-Baden","name":"Automation 2019 : 20. Leitkongress der Mess- und Automatisierungstechnik : autonomous systems and 5G in connected industries ","start_date":"2019-07-02","end_date":"2019-07-03"},"intvolume":" 2351","user_id":"83781","type":"conference","doi":"10.51202/9783181023518-505","_id":"11145","place":"Düsseldorf","citation":{"ieee":"S. Tebbje et al., “Entwicklung einer IT-Sicherheitsinfrastruktur für verteilte Automatisierungssysteme - Integraton verschiedener Middleware- Lösungen in eine durch Attributzertifikate erweiterte, PKI,” in Automation 2019 : 20. Leitkongress der Mess- und Automatisierungstechnik : autonomous systems and 5G in connected industries , Baden-Baden, 2019, vol. 2351, pp. 505–516. doi: 10.51202/9783181023518-505.","ama":"Tebbje S, Niemann KH, Friesen M, et al. Entwicklung einer IT-Sicherheitsinfrastruktur für verteilte Automatisierungssysteme - Integraton verschiedener Middleware- Lösungen in eine durch Attributzertifikate erweiterte, PKI. In: Automation 2019 : 20. Leitkongress der Mess- und Automatisierungstechnik : autonomous systems and 5G in connected industries . Vol 2351. VDI-Berichte. VDI Verlag GmbH; 2019:505-516. doi:10.51202/9783181023518-505","short":"S. Tebbje, K.-H. Niemann, M. Friesen, G. Karthikeyan, S. Heiss, L. Jänicke, C. Meyer, H. Trsek, in: Automation 2019 : 20. Leitkongress der Mess- und Automatisierungstechnik : autonomous systems and 5G in connected industries , VDI Verlag GmbH, Düsseldorf, 2019, pp. 505–516.","din1505-2-1":"Tebbje, S. ; Niemann, K.-H. ; Friesen, Maxim ; Karthikeyan, Gajasri ; Heiss, Stefan ; Jänicke, L. ; Meyer, C. ; Trsek, Henning: Entwicklung einer IT-Sicherheitsinfrastruktur für verteilte Automatisierungssysteme - Integraton verschiedener Middleware- Lösungen in eine durch Attributzertifikate erweiterte, PKI. In: Automation 2019 : 20. Leitkongress der Mess- und Automatisierungstechnik : autonomous systems and 5G in connected industries , VDI-Berichte. Bd. 2351. Düsseldorf : VDI Verlag GmbH, 2019, S. 505–516","chicago-de":"Tebbje, S., K.-H. Niemann, Maxim Friesen, Gajasri Karthikeyan, Stefan Heiss, L. Jänicke, C. Meyer und Henning Trsek. 2019. Entwicklung einer IT-Sicherheitsinfrastruktur für verteilte Automatisierungssysteme - Integraton verschiedener Middleware- Lösungen in eine durch Attributzertifikate erweiterte, PKI. In: Automation 2019 : 20. Leitkongress der Mess- und Automatisierungstechnik : autonomous systems and 5G in connected industries , 2351:505–516. VDI-Berichte. Düsseldorf: VDI Verlag GmbH. doi:10.51202/9783181023518-505, .","apa":"Tebbje, S., Niemann, K.-H., Friesen, M., Karthikeyan, G., Heiss, S., Jänicke, L., Meyer, C., & Trsek, H. (2019). Entwicklung einer IT-Sicherheitsinfrastruktur für verteilte Automatisierungssysteme - Integraton verschiedener Middleware- Lösungen in eine durch Attributzertifikate erweiterte, PKI. Automation 2019 : 20. Leitkongress der Mess- und Automatisierungstechnik : autonomous systems and 5G in connected industries , 2351, 505–516. https://doi.org/10.51202/9783181023518-505","chicago":"Tebbje, S., K.-H. Niemann, Maxim Friesen, Gajasri Karthikeyan, Stefan Heiss, L. Jänicke, C. Meyer, and Henning Trsek. “Entwicklung einer IT-Sicherheitsinfrastruktur für verteilte Automatisierungssysteme - Integraton verschiedener Middleware- Lösungen in eine durch Attributzertifikate erweiterte, PKI.” In Automation 2019 : 20. Leitkongress der Mess- und Automatisierungstechnik : autonomous systems and 5G in connected industries , 2351:505–16. VDI-Berichte. Düsseldorf: VDI Verlag GmbH, 2019. https://doi.org/10.51202/9783181023518-505.","van":"Tebbje S, Niemann KH, Friesen M, Karthikeyan G, Heiss S, Jänicke L, et al. Entwicklung einer IT-Sicherheitsinfrastruktur für verteilte Automatisierungssysteme - Integraton verschiedener Middleware- Lösungen in eine durch Attributzertifikate erweiterte, PKI. In: Automation 2019 : 20 Leitkongress der Mess- und Automatisierungstechnik : autonomous systems and 5G in connected industries . Düsseldorf: VDI Verlag GmbH; 2019. p. 505–16. (VDI-Berichte; vol. 2351).","ufg":"Tebbje, S. u. a.: Entwicklung einer IT-Sicherheitsinfrastruktur für verteilte Automatisierungssysteme - Integraton verschiedener Middleware- Lösungen in eine durch Attributzertifikate erweiterte, PKI, in: o. Hg.: Automation 2019 : 20. Leitkongress der Mess- und Automatisierungstechnik : autonomous systems and 5G in connected industries , Bd. 2351, Düsseldorf 2019 (VDI-Berichte), S. 505–516.","bjps":"Tebbje S et al. (2019) Entwicklung einer IT-Sicherheitsinfrastruktur für verteilte Automatisierungssysteme - Integraton verschiedener Middleware- Lösungen in eine durch Attributzertifikate erweiterte, PKI. Automation 2019 : 20. Leitkongress der Mess- und Automatisierungstechnik : autonomous systems and 5G in connected industries , vol. 2351. Düsseldorf: VDI Verlag GmbH, pp. 505–516.","havard":"S. Tebbje, K.-H. Niemann, M. Friesen, G. Karthikeyan, S. Heiss, L. Jänicke, C. Meyer, H. Trsek, Entwicklung einer IT-Sicherheitsinfrastruktur für verteilte Automatisierungssysteme - Integraton verschiedener Middleware- Lösungen in eine durch Attributzertifikate erweiterte, PKI, in: Automation 2019 : 20. Leitkongress der Mess- und Automatisierungstechnik : autonomous systems and 5G in connected industries , VDI Verlag GmbH, Düsseldorf, 2019: pp. 505–516.","mla":"Tebbje, S., et al. “Entwicklung einer IT-Sicherheitsinfrastruktur für verteilte Automatisierungssysteme - Integraton verschiedener Middleware- Lösungen in eine durch Attributzertifikate erweiterte, PKI.” Automation 2019 : 20. Leitkongress der Mess- und Automatisierungstechnik : autonomous systems and 5G in connected industries , vol. 2351, VDI Verlag GmbH, 2019, pp. 505–16, https://doi.org/10.51202/9783181023518-505."},"volume":2351,"title":"Entwicklung einer IT-Sicherheitsinfrastruktur für verteilte Automatisierungssysteme - Integraton verschiedener Middleware- Lösungen in eine durch Attributzertifikate erweiterte, PKI","page":"505-516","status":"public","author":[{"first_name":"S.","full_name":"Tebbje, S.","last_name":"Tebbje"},{"last_name":"Niemann","first_name":"K.-H.","full_name":"Niemann, K.-H."},{"first_name":"Maxim","last_name":"Friesen","id":"61517","full_name":"Friesen, Maxim"},{"first_name":"Gajasri","full_name":"Karthikeyan, Gajasri","last_name":"Karthikeyan"},{"first_name":"Stefan","full_name":"Heiss, Stefan","last_name":"Heiss","id":"1031"},{"first_name":"L.","full_name":"Jänicke, L.","last_name":"Jänicke"},{"full_name":"Meyer, C.","first_name":"C.","last_name":"Meyer"},{"orcid":"0000-0002-0133-0656","full_name":"Trsek, Henning","last_name":"Trsek","id":"1486","first_name":"Henning"}],"year":"2019","date_updated":"2024-03-11T15:33:45Z","date_created":"2024-03-01T08:30:33Z","publication":"Automation 2019 : 20. Leitkongress der Mess- und Automatisierungstechnik : autonomous systems and 5G in connected industries ","publication_identifier":{"eisbn":["978-3-18-102351-8"],"isbn":["978-3-18-092351-2"]},"language":[{"iso":"ger"}]},{"type":"conference","user_id":"83781","place":"[Piscataway, NJ]","_id":"4756","series_title":"IEEE Industrial Electronics Society","publication_status":"published","conference":{"location":"Lisbon, PORTUGAL","name":"45th Annual Conference of the IEEE Industrial Electronics Society (IECON)","start_date":"2019-10-14","end_date":"2019-10-19"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"abstract":[{"text":"Due to the dynamic nature of the Industrie 4.0 developments, future production systems will be reconfigured more frequently and new system configurations will be deployed automatically. In order to keep pace with this development, it will be required to observe and ensure the needed security functionalities and corresponding certifications in an automated way. This implies an improvement of today's static procedures and manual efforts as much as possible in favor of a dynamic standard establishment. Therefore, this paper evaluates the state of the art of the industrial security standardization landscape and proposes a concept for the automated support of certification processes with information from industrial communication networks in order to enhance the usability of the standards establishments and the certifications within organizations and companies, especially small and medium-sized enterprises.","lang":"eng"}],"publisher":"IEEE","publication_identifier":{"eisbn":["978-1-7281-4878-6"],"issn":["1553-572X"],"isbn":["978-1-7281-4879-3"]},"publication":"IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society (IES)","date_created":"2021-01-28T14:47:12Z","date_updated":"2025-06-26T13:31:27Z","corporate_editor":[" IEEE Industrial Electronics Society. Annual Conference ","IEEE Industrial Electronics Society ","Universidade Nova de Lisboa ","Institute of Electrical and Electronics Engineers"],"keyword":["Industrial Automation","Security","Toolchain","Standardization","Communication Networks"],"language":[{"iso":"eng"}],"title":"Survey of Security Standards for an automated Industrie 4.0 compatible Manufacturing","citation":{"ama":"Ehrlich M, Trsek H, Wisniewski L, Jasperneite J. Survey of Security Standards for an automated Industrie 4.0 compatible Manufacturing. In: IEEE Industrial Electronics Society. Annual Conference , IEEE Industrial Electronics Society , Universidade Nova de Lisboa , Institute of Electrical and Electronics Engineers, eds. IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society (IES). IEEE Industrial Electronics Society. IEEE; 2019:2849-2854.","ieee":"M. Ehrlich, H. Trsek, L. Wisniewski, and J. Jasperneite, “Survey of Security Standards for an automated Industrie 4.0 compatible Manufacturing,” in IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society (IES), Lisbon, PORTUGAL, 2019, pp. 2849–2854.","chicago-de":"Ehrlich, Marco, Henning Trsek, Lukasz Wisniewski und Jürgen Jasperneite. 2019. Survey of Security Standards for an automated Industrie 4.0 compatible Manufacturing. In: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society (IES), hg. von IEEE Industrial Electronics Society. Annual Conference , IEEE Industrial Electronics Society , Universidade Nova de Lisboa , und Institute of Electrical and Electronics Engineers, 2849–2854. IEEE Industrial Electronics Society. [Piscataway, NJ]: IEEE.","din1505-2-1":"Ehrlich, Marco ; Trsek, Henning ; Wisniewski, Lukasz ; Jasperneite, Jürgen: Survey of Security Standards for an automated Industrie 4.0 compatible Manufacturing. In: IEEE Industrial Electronics Society. Annual Conference ; IEEE Industrial Electronics Society ; Universidade Nova de Lisboa ; Institute of Electrical and Electronics Engineers (Hrsg.): IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society (IES), IEEE Industrial Electronics Society. [Piscataway, NJ] : IEEE, 2019, S. 2849–2854","short":"M. Ehrlich, H. Trsek, L. Wisniewski, J. Jasperneite, in: IEEE Industrial Electronics Society. Annual Conference , IEEE Industrial Electronics Society , Universidade Nova de Lisboa , Institute of Electrical and Electronics Engineers (Eds.), IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society (IES), IEEE, [Piscataway, NJ], 2019, pp. 2849–2854.","bjps":"Ehrlich M et al. (2019) Survey of Security Standards for an Automated Industrie 4.0 Compatible Manufacturing. In IEEE Industrial Electronics Society. Annual Conference et al. (eds), IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society (IES). [Piscataway, NJ]: IEEE, pp. 2849–2854.","mla":"Ehrlich, Marco, et al. “Survey of Security Standards for an Automated Industrie 4.0 Compatible Manufacturing.” IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society (IES), edited by IEEE Industrial Electronics Society. Annual Conference et al., IEEE, 2019, pp. 2849–54.","havard":"M. Ehrlich, H. Trsek, L. Wisniewski, J. Jasperneite, Survey of Security Standards for an automated Industrie 4.0 compatible Manufacturing, in: IEEE Industrial Electronics Society. Annual Conference , IEEE Industrial Electronics Society , Universidade Nova de Lisboa , Institute of Electrical and Electronics Engineers (Eds.), IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society (IES), IEEE, [Piscataway, NJ], 2019: pp. 2849–2854.","ufg":"Ehrlich, Marco u. a.: Survey of Security Standards for an automated Industrie 4.0 compatible Manufacturing, in: IEEE Industrial Electronics Society. Annual Conference u. a. (Hgg.): IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society (IES), [Piscataway, NJ] 2019 (IEEE Industrial Electronics Society), S. 2849–2854.","van":"Ehrlich M, Trsek H, Wisniewski L, Jasperneite J. Survey of Security Standards for an automated Industrie 4.0 compatible Manufacturing. In: IEEE Industrial Electronics Society. Annual Conference , IEEE Industrial Electronics Society , Universidade Nova de Lisboa , Institute of Electrical and Electronics Engineers, editors. IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society (IES). [Piscataway, NJ]: IEEE; 2019. p. 2849–54. (IEEE Industrial Electronics Society).","chicago":"Ehrlich, Marco, Henning Trsek, Lukasz Wisniewski, and Jürgen Jasperneite. “Survey of Security Standards for an Automated Industrie 4.0 Compatible Manufacturing.” In IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society (IES), edited by IEEE Industrial Electronics Society. Annual Conference , IEEE Industrial Electronics Society , Universidade Nova de Lisboa , and Institute of Electrical and Electronics Engineers, 2849–54. IEEE Industrial Electronics Society. [Piscataway, NJ]: IEEE, 2019.","apa":"Ehrlich, M., Trsek, H., Wisniewski, L., & Jasperneite, J. (2019). Survey of Security Standards for an automated Industrie 4.0 compatible Manufacturing. In IEEE Industrial Electronics Society. Annual Conference , IEEE Industrial Electronics Society , Universidade Nova de Lisboa , & Institute of Electrical and Electronics Engineers (Eds.), IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society (IES) (pp. 2849–2854). IEEE."},"author":[{"first_name":"Marco","last_name":"Ehrlich","full_name":"Ehrlich, Marco","id":"61562"},{"orcid":"0000-0002-0133-0656","full_name":"Trsek, Henning","first_name":"Henning","id":"1486","last_name":"Trsek"},{"last_name":"Wisniewski","id":"1710","full_name":"Wisniewski, Lukasz","first_name":"Lukasz"},{"first_name":"Jürgen","last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen"}],"year":"2019","status":"public","page":"2849-2854"},{"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2019,"author":[{"full_name":"Frimpong, Ansah","first_name":"Ansah","last_name":"Frimpong"},{"full_name":"Majumder, Mainak","first_name":"Mainak","last_name":"Majumder","id":"73861"},{"last_name":"de Meer","first_name":"Hermann","full_name":"de Meer, Hermann"},{"full_name":"Jasperneite, Jürgen","id":"1899","last_name":"Jasperneite","first_name":"Jürgen"}],"status":"public","title":"Network Slicing : An Industry Perspective.","citation":{"chicago-de":"Frimpong, Ansah, Mainak Majumder, Hermann de Meer und Jürgen Jasperneite. 2019. Network Slicing : An Industry Perspective. In: 24th International Conference on Emerging Technologies and Factory Automation (ETFA). Saragossa (Spanien).","din1505-2-1":"Frimpong, Ansah ; Majumder, Mainak ; de Meer, Hermann ; Jasperneite, Jürgen: Network Slicing : An Industry Perspective. In: 24th International Conference on Emerging Technologies and Factory Automation (ETFA). Saragossa (Spanien), 2019","short":"A. Frimpong, M. Majumder, H. de Meer, J. Jasperneite, in: 24th International Conference on Emerging Technologies and Factory Automation (ETFA), Saragossa (Spanien), 2019.","ufg":"Frimpong, Ansah et. al. (2019): Network Slicing : An Industry Perspective., in: 24th International Conference on Emerging Technologies and Factory Automation (ETFA), Saragossa (Spanien).","havard":"A. Frimpong, M. Majumder, H. de Meer, J. Jasperneite, Network Slicing : An Industry Perspective., in: 24th International Conference on Emerging Technologies and Factory Automation (ETFA), Saragossa (Spanien), 2019.","bjps":"Frimpong A et al. (2019) Network Slicing : An Industry Perspective. 24th International Conference on Emerging Technologies and Factory Automation (ETFA). Saragossa (Spanien).","mla":"Frimpong, Ansah, et al. “Network Slicing : An Industry Perspective.” 24th International Conference on Emerging Technologies and Factory Automation (ETFA), 2019.","van":"Frimpong A, Majumder M, de Meer H, Jasperneite J. Network Slicing : An Industry Perspective. In: 24th International Conference on Emerging Technologies and Factory Automation (ETFA). Saragossa (Spanien); 2019.","chicago":"Frimpong, Ansah, Mainak Majumder, Hermann de Meer, and Jürgen Jasperneite. “Network Slicing : An Industry Perspective.” In 24th International Conference on Emerging Technologies and Factory Automation (ETFA). Saragossa (Spanien), 2019.","apa":"Frimpong, A., Majumder, M., de Meer, H., & Jasperneite, J. (2019). Network Slicing : An Industry Perspective. In 24th International Conference on Emerging Technologies and Factory Automation (ETFA). Saragossa (Spanien).","ama":"Frimpong A, Majumder M, de Meer H, Jasperneite J. Network Slicing : An Industry Perspective. In: 24th International Conference on Emerging Technologies and Factory Automation (ETFA). Saragossa (Spanien); 2019.","ieee":"A. Frimpong, M. Majumder, H. de Meer, and J. Jasperneite, “Network Slicing : An Industry Perspective.,” in 24th International Conference on Emerging Technologies and Factory Automation (ETFA), 2019."},"language":[{"iso":"eng"}],"place":"Saragossa (Spanien)","_id":"4757","date_created":"2021-01-28T14:50:21Z","type":"conference","publication":"24th International Conference on Emerging Technologies and Factory Automation (ETFA)","date_updated":"2023-03-15T13:49:55Z","user_id":"74222"},{"date_created":"2021-01-28T14:52:07Z","type":"conference","publication":"24rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2019)","date_updated":"2023-03-15T13:49:55Z","user_id":"74222","language":[{"iso":"eng"}],"place":"Zaragoza, Spain","_id":"4758","title":"Dynamic scheduling in modern processing networks using expert-guided distributed reinforcement learning","citation":{"ieee":"S. Qu, J. Wang, and J. Jasperneite, “Dynamic scheduling in modern processing networks using expert-guided distributed reinforcement learning,” in 24rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2019), 2019.","ama":"Qu S, Wang J, Jasperneite J. Dynamic scheduling in modern processing networks using expert-guided distributed reinforcement learning. In: 24rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2019). Zaragoza, Spain; 2019.","chicago":"Qu, Shuhui, Jie Wang, and Jürgen Jasperneite. “Dynamic Scheduling in Modern Processing Networks Using Expert-Guided Distributed Reinforcement Learning.” In 24rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2019). Zaragoza, Spain, 2019.","apa":"Qu, S., Wang, J., & Jasperneite, J. (2019). Dynamic scheduling in modern processing networks using expert-guided distributed reinforcement learning. In 24rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2019). Zaragoza, Spain.","ufg":"Qu, Shuhui et. al. (2019): Dynamic scheduling in modern processing networks using expert-guided distributed reinforcement learning, in: 24rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2019), Zaragoza, Spain.","mla":"Qu, Shuhui, et al. “Dynamic Scheduling in Modern Processing Networks Using Expert-Guided Distributed Reinforcement Learning.” 24rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2019), 2019.","bjps":"Qu S, Wang J and Jasperneite J (2019) Dynamic Scheduling in Modern Processing Networks Using Expert-Guided Distributed Reinforcement Learning. 24rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2019). Zaragoza, Spain.","havard":"S. Qu, J. Wang, J. Jasperneite, Dynamic scheduling in modern processing networks using expert-guided distributed reinforcement learning, in: 24rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2019), Zaragoza, Spain, 2019.","van":"Qu S, Wang J, Jasperneite J. Dynamic scheduling in modern processing networks using expert-guided distributed reinforcement learning. In: 24rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2019). Zaragoza, Spain; 2019.","din1505-2-1":"Qu, Shuhui ; Wang, Jie ; Jasperneite, Jürgen: Dynamic scheduling in modern processing networks using expert-guided distributed reinforcement learning. In: 24rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2019). Zaragoza, Spain, 2019","chicago-de":"Qu, Shuhui, Jie Wang und Jürgen Jasperneite. 2019. Dynamic scheduling in modern processing networks using expert-guided distributed reinforcement learning. In: 24rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2019). Zaragoza, Spain.","short":"S. Qu, J. Wang, J. Jasperneite, in: 24rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2019), Zaragoza, Spain, 2019."},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2019,"author":[{"first_name":"Shuhui","full_name":"Qu, Shuhui","last_name":"Qu"},{"full_name":"Wang, Jie","first_name":"Jie","last_name":"Wang"},{"full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","id":"1899","first_name":"Jürgen"}],"status":"public"},{"status":"public","year":2019,"author":[{"first_name":"Arne","last_name":"Neumann","id":"61915","full_name":"Neumann, Arne"},{"first_name":"Lukasz","last_name":"Wisniewski","full_name":"Wisniewski, Lukasz","id":"1710"},{"last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"citation":{"ieee":"A. Neumann, L. Wisniewski, and J. Jasperneite, “5G into Profinet integration as a use case for network slicing,” in 24th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2019, Zaragoza, Spain, 2019.","ama":"Neumann A, Wisniewski L, Jasperneite J. 5G into Profinet integration as a use case for network slicing. In: 24th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2019. Zaragoza, Spain; 2019.","chicago":"Neumann, Arne, Lukasz Wisniewski, and Jürgen Jasperneite. “5G into Profinet Integration as a Use Case for Network Slicing.” In 24th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2019. Zaragoza, Spain, 2019.","apa":"Neumann, A., Wisniewski, L., & Jasperneite, J. (2019). 5G into Profinet integration as a use case for network slicing. In 24th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2019. Zaragoza, Spain.","ufg":"Neumann, Arne et. al. (2019): 5G into Profinet integration as a use case for network slicing, in: 24th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2019, Zaragoza, Spain.","havard":"A. Neumann, L. Wisniewski, J. Jasperneite, 5G into Profinet integration as a use case for network slicing, in: 24th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2019, Zaragoza, Spain, 2019.","mla":"Neumann, Arne, et al. “5G into Profinet Integration as a Use Case for Network Slicing.” 24th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2019, 2019.","bjps":"Neumann A, Wisniewski L and Jasperneite J (2019) 5G into Profinet Integration as a Use Case for Network Slicing. 24th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2019. Zaragoza, Spain.","van":"Neumann A, Wisniewski L, Jasperneite J. 5G into Profinet integration as a use case for network slicing. In: 24th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2019. Zaragoza, Spain; 2019.","chicago-de":"Neumann, Arne, Lukasz Wisniewski und Jürgen Jasperneite. 2019. 5G into Profinet integration as a use case for network slicing. In: 24th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2019. Zaragoza, Spain.","din1505-2-1":"Neumann, Arne ; Wisniewski, Lukasz ; Jasperneite, Jürgen: 5G into Profinet integration as a use case for network slicing. In: 24th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2019. Zaragoza, Spain, 2019","short":"A. Neumann, L. Wisniewski, J. Jasperneite, in: 24th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2019, Zaragoza, Spain, 2019."},"title":"5G into Profinet integration as a use case for network slicing","place":"Zaragoza, Spain","language":[{"iso":"eng"}],"_id":"4759","user_id":"74222","date_updated":"2023-03-15T13:49:55Z","publication":"24th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2019","type":"book_chapter","date_created":"2021-01-28T14:52:58Z"},{"date_updated":"2023-03-15T13:49:55Z","user_id":"74222","type":"conference","date_created":"2021-01-28T14:54:20Z","publication":"24th International Conference on Emerging Technologies and Factory Automation (ETFA)","_id":"4760","language":[{"iso":"eng"}],"place":"Saragossa (Spanien)","citation":{"short":"M. Ehrlich, H. Trsek, J. Paffrath, M. Gergeleit, K. Simkin, J. Jasperneite, in: 24th International Conference on Emerging Technologies and Factory Automation (ETFA), Saragossa (Spanien), 2019.","din1505-2-1":"Ehrlich, Marco ; Trsek, Henning ; Paffrath, Julius ; Gergeleit, Martin ; Simkin, Kostyantyn ; Jasperneite, Jürgen: Secure and Flexible Deployment of Industrial Applications inside Cloud-Based Environments. In: 24th International Conference on Emerging Technologies and Factory Automation (ETFA). Saragossa (Spanien), 2019","chicago-de":"Ehrlich, Marco, Henning Trsek, Julius Paffrath, Martin Gergeleit, Kostyantyn Simkin und Jürgen Jasperneite. 2019. Secure and Flexible Deployment of Industrial Applications inside Cloud-Based Environments. In: 24th International Conference on Emerging Technologies and Factory Automation (ETFA). Saragossa (Spanien).","apa":"Ehrlich, M., Trsek, H., Paffrath, J., Gergeleit, M., Simkin, K., & Jasperneite, J. (2019). Secure and Flexible Deployment of Industrial Applications inside Cloud-Based Environments. In 24th International Conference on Emerging Technologies and Factory Automation (ETFA). Saragossa (Spanien).","chicago":"Ehrlich, Marco, Henning Trsek, Julius Paffrath, Martin Gergeleit, Kostyantyn Simkin, and Jürgen Jasperneite. “Secure and Flexible Deployment of Industrial Applications inside Cloud-Based Environments.” In 24th International Conference on Emerging Technologies and Factory Automation (ETFA). Saragossa (Spanien), 2019.","van":"Ehrlich M, Trsek H, Paffrath J, Gergeleit M, Simkin K, Jasperneite J. Secure and Flexible Deployment of Industrial Applications inside Cloud-Based Environments. In: 24th International Conference on Emerging Technologies and Factory Automation (ETFA). Saragossa (Spanien); 2019.","ufg":"Ehrlich, Marco et. al. (2019): Secure and Flexible Deployment of Industrial Applications inside Cloud-Based Environments, in: 24th International Conference on Emerging Technologies and Factory Automation (ETFA), Saragossa (Spanien).","havard":"M. Ehrlich, H. Trsek, J. Paffrath, M. Gergeleit, K. Simkin, J. Jasperneite, Secure and Flexible Deployment of Industrial Applications inside Cloud-Based Environments, in: 24th International Conference on Emerging Technologies and Factory Automation (ETFA), Saragossa (Spanien), 2019.","mla":"Ehrlich, Marco, et al. “Secure and Flexible Deployment of Industrial Applications inside Cloud-Based Environments.” 24th International Conference on Emerging Technologies and Factory Automation (ETFA), 2019.","bjps":"Ehrlich M et al. (2019) Secure and Flexible Deployment of Industrial Applications inside Cloud-Based Environments. 24th International Conference on Emerging Technologies and Factory Automation (ETFA). Saragossa (Spanien).","ieee":"M. Ehrlich, H. Trsek, J. Paffrath, M. Gergeleit, K. Simkin, and J. Jasperneite, “Secure and Flexible Deployment of Industrial Applications inside Cloud-Based Environments,” in 24th International Conference on Emerging Technologies and Factory Automation (ETFA), 2019.","ama":"Ehrlich M, Trsek H, Paffrath J, Gergeleit M, Simkin K, Jasperneite J. Secure and Flexible Deployment of Industrial Applications inside Cloud-Based Environments. In: 24th International Conference on Emerging Technologies and Factory Automation (ETFA). Saragossa (Spanien); 2019."},"title":"Secure and Flexible Deployment of Industrial Applications inside Cloud-Based Environments","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2019,"author":[{"full_name":"Ehrlich, Marco","id":"61562","first_name":"Marco","last_name":"Ehrlich"},{"first_name":"Henning","last_name":"Trsek","full_name":"Trsek, Henning","id":"1486"},{"full_name":"Paffrath, Julius","first_name":"Julius","last_name":"Paffrath"},{"full_name":"Gergeleit, Martin","last_name":"Gergeleit","first_name":"Martin"},{"full_name":"Simkin, Kostyantyn","last_name":"Simkin","first_name":"Kostyantyn"},{"last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"}]},{"keyword":["maintenance","Asset Administration Shell"],"language":[{"iso":"eng"}],"date_updated":"2025-06-26T13:36:42Z","corporate_editor":["Aalto-Yliopisto","Tampereen yliopisto ","Suomen Automaatioseura ","Institute of Electrical and Electronics Engineers "],"publication":"17th International Conference on Industrial Informatics (IEEE-INDIN 2019)","publication_identifier":{"issn":["1935-4576"],"eisbn":["978-1-7281-2927-3 "],"isbn":["978-1-7281-2928-0 "]},"date_created":"2021-01-28T14:55:44Z","status":"public","page":"768-773","author":[{"id":"68941","full_name":"Lang, Dorota","first_name":"Dorota","last_name":"Lang"},{"last_name":"Grunau","id":"62156","full_name":"Grunau, Sergej","first_name":"Sergej"},{"last_name":"Wisniewski","first_name":"Lukasz","full_name":"Wisniewski, Lukasz","id":"1710"},{"last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"}],"year":"2019","citation":{"apa":"Lang, D., Grunau, S., Wisniewski, L., & Jasperneite, J. (2019). Utilization of the Asset Administration Shell to Support Humans During the Maintenance Process. In Aalto-Yliopisto, Tampereen yliopisto , Suomen Automaatioseura , & Institute of Electrical and Electronics Engineers (Eds.), 17th International Conference on Industrial Informatics (IEEE-INDIN 2019) (pp. 768–773). IEEE. https://doi.org/10.1109/indin41052.2019.8972236","chicago":"Lang, Dorota, Sergej Grunau, Lukasz Wisniewski, and Jürgen Jasperneite. “Utilization of the Asset Administration Shell to Support Humans During the Maintenance Process.” In 17th International Conference on Industrial Informatics (IEEE-INDIN 2019), edited by Aalto-Yliopisto, Tampereen yliopisto , Suomen Automaatioseura , and Institute of Electrical and Electronics Engineers , 768–73. IEEE International Conference on Industrial Informatics INDIN. [Piscataway, NJ]: IEEE, 2019. https://doi.org/10.1109/indin41052.2019.8972236.","van":"Lang D, Grunau S, Wisniewski L, Jasperneite J. Utilization of the Asset Administration Shell to Support Humans During the Maintenance Process. In: Aalto-Yliopisto, Tampereen yliopisto , Suomen Automaatioseura , Institute of Electrical and Electronics Engineers , editors. 17th International Conference on Industrial Informatics (IEEE-INDIN 2019). [Piscataway, NJ]: IEEE; 2019. p. 768–73. (IEEE International Conference on Industrial Informatics INDIN).","havard":"D. Lang, S. Grunau, L. Wisniewski, J. Jasperneite, Utilization of the Asset Administration Shell to Support Humans During the Maintenance Process, in: Aalto-Yliopisto, Tampereen yliopisto , Suomen Automaatioseura , Institute of Electrical and Electronics Engineers (Eds.), 17th International Conference on Industrial Informatics (IEEE-INDIN 2019), IEEE, [Piscataway, NJ], 2019: pp. 768–773.","mla":"Lang, Dorota, et al. “Utilization of the Asset Administration Shell to Support Humans During the Maintenance Process.” 17th International Conference on Industrial Informatics (IEEE-INDIN 2019), edited by Aalto-Yliopisto et al., IEEE, 2019, pp. 768–73, https://doi.org/10.1109/indin41052.2019.8972236.","bjps":"Lang D et al. (2019) Utilization of the Asset Administration Shell to Support Humans During the Maintenance Process. In Aalto-Yliopisto et al. (eds), 17th International Conference on Industrial Informatics (IEEE-INDIN 2019). [Piscataway, NJ]: IEEE, pp. 768–773.","ufg":"Lang, Dorota u. a.: Utilization of the Asset Administration Shell to Support Humans During the Maintenance Process, in: Aalto-Yliopisto u. a. (Hgg.): 17th International Conference on Industrial Informatics (IEEE-INDIN 2019), [Piscataway, NJ] 2019 (IEEE International Conference on Industrial Informatics INDIN), S. 768–773.","short":"D. Lang, S. Grunau, L. Wisniewski, J. Jasperneite, in: Aalto-Yliopisto, Tampereen yliopisto , Suomen Automaatioseura , Institute of Electrical and Electronics Engineers (Eds.), 17th International Conference on Industrial Informatics (IEEE-INDIN 2019), IEEE, [Piscataway, NJ], 2019, pp. 768–773.","din1505-2-1":"Lang, Dorota ; Grunau, Sergej ; Wisniewski, Lukasz ; Jasperneite, Jürgen: Utilization of the Asset Administration Shell to Support Humans During the Maintenance Process. In: Aalto-Yliopisto ; Tampereen yliopisto ; Suomen Automaatioseura ; Institute of Electrical and Electronics Engineers (Hrsg.): 17th International Conference on Industrial Informatics (IEEE-INDIN 2019), IEEE International Conference on Industrial Informatics INDIN. [Piscataway, NJ] : IEEE, 2019, S. 768–773","chicago-de":"Lang, Dorota, Sergej Grunau, Lukasz Wisniewski und Jürgen Jasperneite. 2019. Utilization of the Asset Administration Shell to Support Humans During the Maintenance Process. In: 17th International Conference on Industrial Informatics (IEEE-INDIN 2019), hg. von Aalto-Yliopisto, Tampereen yliopisto , Suomen Automaatioseura , und Institute of Electrical and Electronics Engineers , 768–773. IEEE International Conference on Industrial Informatics INDIN. [Piscataway, NJ]: IEEE. doi:10.1109/indin41052.2019.8972236, .","ieee":"D. Lang, S. Grunau, L. Wisniewski, and J. Jasperneite, “Utilization of the Asset Administration Shell to Support Humans During the Maintenance Process,” in 17th International Conference on Industrial Informatics (IEEE-INDIN 2019), Helsinki-Espoo, Finland, 2019, pp. 768–773. doi: 10.1109/indin41052.2019.8972236.","ama":"Lang D, Grunau S, Wisniewski L, Jasperneite J. Utilization of the Asset Administration Shell to Support Humans During the Maintenance Process. In: Aalto-Yliopisto, Tampereen yliopisto , Suomen Automaatioseura , Institute of Electrical and Electronics Engineers , eds. 17th International Conference on Industrial Informatics (IEEE-INDIN 2019). IEEE International Conference on Industrial Informatics INDIN. IEEE; 2019:768-773. doi:10.1109/indin41052.2019.8972236"},"title":"Utilization of the Asset Administration Shell to Support Humans During the Maintenance Process","place":"[Piscataway, NJ]","_id":"4761","doi":"10.1109/indin41052.2019.8972236","user_id":"83781","type":"conference","publisher":"IEEE","conference":{"start_date":"2019-07-22","end_date":"2019-07-25","location":"Helsinki-Espoo, Finland","name":"17th IEEE International Conference on Industrial Informatics (INDIN)"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"abstract":[{"text":"Maintenance is an important set of various activities related to preserving from failure or decline. Improper or lack of maintenance may result in excessive component wear, production quality deterioration, or even longer downtime. However, today's production facilities strive to devote the least amount of necessary maintenance time in order to maximize production time. Therefore, new solutions for deliberate and efficient maintenance are needed. The solution proposed in this paper benefits from the newest trends and innovations in industry, namely the Asset Administration Shell (AAS) which is part of the Industrie 4.0 (I4.0) concept. The AAS shall contain the maintenance submodel which shall be used for supporting humans during the maintenance process. The submodel provides a standardized description of required tools and parts as well as step-by-step instructions which also include safety concerns and multimedia files, such as pictures and videos. In this way, maintenance can be carried out more reliably, resulting in reduced downtime. In addition, feedback from the maintenance process shall be stored in the submodel and fed through an I4.0-compliant network to other processes from different phases of the life cycle in order to improve them.","lang":"eng"}],"publication_status":"published","series_title":"IEEE International Conference on Industrial Informatics INDIN"},{"publisher":"IEEE","status":"public","page":"8","year":2019,"author":[{"first_name":"Santosh Kumar","id":"71899","full_name":"Panda, Santosh Kumar","last_name":"Panda"},{"full_name":"Majumder, Mainak","id":"73861","first_name":"Mainak","last_name":"Majumder"},{"first_name":"Marco","id":"61562","full_name":"Ehrlich, Marco","last_name":"Ehrlich"},{"full_name":"Neumann, Arne","id":"61915","last_name":"Neumann","first_name":"Arne"},{"id":"1710","first_name":"Lukasz","full_name":"Wisniewski, Lukasz","last_name":"Wisniewski"},{"first_name":"Jürgen","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","id":"1899"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"citation":{"ieee":"S. K. Panda, M. Majumder, M. Ehrlich, A. Neumann, L. Wisniewski, and J. Jasperneite, “Topology Detection as a Base for Efficient Management of Heterogeneous Industrial Network Systems Using Software-Defined Networking,” in IEEE Workshop on Factory Communication Systems 2019, 2019, p. 8.","apa":"Panda, S. K., Majumder, M., Ehrlich, M., Neumann, A., Wisniewski, L., & Jasperneite, J. (2019). Topology Detection as a Base for Efficient Management of Heterogeneous Industrial Network Systems Using Software-Defined Networking. In IEEE Workshop on Factory Communication Systems 2019 (p. 8). Sundsvall, Sweden: IEEE.","chicago":"Panda, Santosh Kumar, Mainak Majumder, Marco Ehrlich, Arne Neumann, Lukasz Wisniewski, and Jürgen Jasperneite. “Topology Detection as a Base for Efficient Management of Heterogeneous Industrial Network Systems Using Software-Defined Networking.” In IEEE Workshop on Factory Communication Systems 2019, 8. Sundsvall, Sweden: IEEE, 2019.","ama":"Panda SK, Majumder M, Ehrlich M, Neumann A, Wisniewski L, Jasperneite J. Topology Detection as a Base for Efficient Management of Heterogeneous Industrial Network Systems Using Software-Defined Networking. In: IEEE Workshop on Factory Communication Systems 2019. Sundsvall, Sweden: IEEE; 2019:8.","van":"Panda SK, Majumder M, Ehrlich M, Neumann A, Wisniewski L, Jasperneite J. Topology Detection as a Base for Efficient Management of Heterogeneous Industrial Network Systems Using Software-Defined Networking. In: IEEE Workshop on Factory Communication Systems 2019. Sundsvall, Sweden: IEEE; 2019. p. 8.","havard":"S.K. Panda, M. Majumder, M. Ehrlich, A. Neumann, L. Wisniewski, J. Jasperneite, Topology Detection as a Base for Efficient Management of Heterogeneous Industrial Network Systems Using Software-Defined Networking, in: IEEE Workshop on Factory Communication Systems 2019, IEEE, Sundsvall, Sweden, 2019: p. 8.","mla":"Panda, Santosh Kumar, et al. “Topology Detection as a Base for Efficient Management of Heterogeneous Industrial Network Systems Using Software-Defined Networking.” IEEE Workshop on Factory Communication Systems 2019, IEEE, 2019, p. 8.","bjps":"Panda SK et al. (2019) Topology Detection as a Base for Efficient Management of Heterogeneous Industrial Network Systems Using Software-Defined Networking. IEEE Workshop on Factory Communication Systems 2019. Sundsvall, Sweden: IEEE, p. 8.","ufg":"Panda, Santosh Kumar et. al. (2019): Topology Detection as a Base for Efficient Management of Heterogeneous Industrial Network Systems Using Software-Defined Networking, in: IEEE Workshop on Factory Communication Systems 2019, Sundsvall, Sweden, S. 8.","short":"S.K. Panda, M. Majumder, M. Ehrlich, A. Neumann, L. Wisniewski, J. Jasperneite, in: IEEE Workshop on Factory Communication Systems 2019, IEEE, Sundsvall, Sweden, 2019, p. 8.","din1505-2-1":"Panda, Santosh Kumar ; Majumder, Mainak ; Ehrlich, Marco ; Neumann, Arne ; Wisniewski, Lukasz ; Jasperneite, Jürgen: Topology Detection as a Base for Efficient Management of Heterogeneous Industrial Network Systems Using Software-Defined Networking. In: IEEE Workshop on Factory Communication Systems 2019. Sundsvall, Sweden : IEEE, 2019, S. 8","chicago-de":"Panda, Santosh Kumar, Mainak Majumder, Marco Ehrlich, Arne Neumann, Lukasz Wisniewski und Jürgen Jasperneite. 2019. Topology Detection as a Base for Efficient Management of Heterogeneous Industrial Network Systems Using Software-Defined Networking. In: IEEE Workshop on Factory Communication Systems 2019, 8. Sundsvall, Sweden: IEEE."},"title":"Topology Detection as a Base for Efficient Management of Heterogeneous Industrial Network Systems Using Software-Defined Networking","_id":"4762","place":"Sundsvall, Sweden","language":[{"iso":"eng"}],"user_id":"74222","date_updated":"2023-03-15T13:49:55Z","publication":"IEEE Workshop on Factory Communication Systems 2019","type":"conference","date_created":"2021-01-28T14:57:24Z"},{"_id":"4763","place":"Museumsrunde IHK Lippe und TH OWL","language":[{"iso":"eng"}],"publication":"Vortrag","type":"conference","date_created":"2021-01-28T14:59:55Z","user_id":"74222","date_updated":"2023-03-15T13:49:55Z","year":2019,"author":[{"first_name":"Jürgen","id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public","title":"Auf ewig verbunden – Was ist der digitale Zwilling? ","citation":{"din1505-2-1":"Jasperneite, Jürgen: Auf ewig verbunden – Was ist der digitale Zwilling? . In: Vortrag. Museumsrunde IHK Lippe und TH OWL, 2019","chicago-de":"Jasperneite, Jürgen. 2019. Auf ewig verbunden – Was ist der digitale Zwilling? . In: Vortrag. Museumsrunde IHK Lippe und TH OWL.","short":"J. Jasperneite, in: Vortrag, Museumsrunde IHK Lippe und TH OWL, 2019.","ufg":"Jasperneite, Jürgen (2019): Auf ewig verbunden – Was ist der digitale Zwilling? , in: Vortrag, Museumsrunde IHK Lippe und TH OWL.","havard":"J. Jasperneite, Auf ewig verbunden – Was ist der digitale Zwilling? , in: Vortrag, Museumsrunde IHK Lippe und TH OWL, 2019.","bjps":"Jasperneite J (2019) Auf Ewig Verbunden – Was Ist Der Digitale Zwilling? . Vortrag. Museumsrunde IHK Lippe und TH OWL.","mla":"Jasperneite, Jürgen. “Auf Ewig Verbunden – Was Ist Der Digitale Zwilling? .” Vortrag, 2019.","van":"Jasperneite J. Auf ewig verbunden – Was ist der digitale Zwilling? . In: Vortrag. Museumsrunde IHK Lippe und TH OWL; 2019.","chicago":"Jasperneite, Jürgen. “Auf Ewig Verbunden – Was Ist Der Digitale Zwilling? .” In Vortrag. Museumsrunde IHK Lippe und TH OWL, 2019.","apa":"Jasperneite, J. (2019). Auf ewig verbunden – Was ist der digitale Zwilling? . In Vortrag. Museumsrunde IHK Lippe und TH OWL.","ama":"Jasperneite J. Auf ewig verbunden – Was ist der digitale Zwilling? . In: Vortrag. Museumsrunde IHK Lippe und TH OWL; 2019.","ieee":"J. Jasperneite, “Auf ewig verbunden – Was ist der digitale Zwilling? ,” in Vortrag, 2019."}},{"language":[{"iso":"eng"}],"_id":"4764","date_updated":"2023-03-15T13:49:55Z","user_id":"74222","type":"conference","date_created":"2021-01-28T15:02:22Z","publication":"at - Automatisierungstechnik 67 (1), Special Issue: Methods for a reliable wireless communication in the industry","page":"69-78","status":"public","publisher":"De Gruyter","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"last_name":"Ehrlich","id":"61562","full_name":"Ehrlich, Marco","first_name":"Marco"},{"id":"61915","first_name":"Arne","last_name":"Neumann","full_name":"Neumann, Arne"},{"first_name":"Alexander","full_name":"Biendarra, Alexander","last_name":"Biendarra"},{"full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","id":"1899","first_name":"Jürgen"}],"year":2019,"citation":{"ufg":"Ehrlich, Marco et. al. (2019): Quality-of-Service Monitoring of Hybrid Industrial Communication Networks, in: at - Automatisierungstechnik 67 (1), Special Issue: Methods for a reliable wireless communication in the industry, S. 69–78.","bjps":"Ehrlich M et al. (2019) Quality-of-Service Monitoring of Hybrid Industrial Communication Networks. At - Automatisierungstechnik 67 (1), Special Issue: Methods for a Reliable Wireless Communication in the Industry. De Gruyter, pp. 69–78.","mla":"Ehrlich, Marco, et al. “Quality-of-Service Monitoring of Hybrid Industrial Communication Networks.” At - Automatisierungstechnik 67 (1), Special Issue: Methods for a Reliable Wireless Communication in the Industry, De Gruyter, 2019, pp. 69–78.","havard":"M. Ehrlich, A. Neumann, A. Biendarra, J. Jasperneite, Quality-of-Service Monitoring of Hybrid Industrial Communication Networks, in: At - Automatisierungstechnik 67 (1), Special Issue: Methods for a Reliable Wireless Communication in the Industry, De Gruyter, 2019: pp. 69–78.","van":"Ehrlich M, Neumann A, Biendarra A, Jasperneite J. Quality-of-Service Monitoring of Hybrid Industrial Communication Networks. In: at - Automatisierungstechnik 67 (1), Special Issue: Methods for a reliable wireless communication in the industry. De Gruyter; 2019. p. 69–78.","chicago":"Ehrlich, Marco, Arne Neumann, Alexander Biendarra, and Jürgen Jasperneite. “Quality-of-Service Monitoring of Hybrid Industrial Communication Networks.” In At - Automatisierungstechnik 67 (1), Special Issue: Methods for a Reliable Wireless Communication in the Industry, 69–78. De Gruyter, 2019.","apa":"Ehrlich, M., Neumann, A., Biendarra, A., & Jasperneite, J. (2019). Quality-of-Service Monitoring of Hybrid Industrial Communication Networks. In at - Automatisierungstechnik 67 (1), Special Issue: Methods for a reliable wireless communication in the industry (pp. 69–78). De Gruyter.","din1505-2-1":"Ehrlich, Marco ; Neumann, Arne ; Biendarra, Alexander ; Jasperneite, Jürgen: Quality-of-Service Monitoring of Hybrid Industrial Communication Networks. In: at - Automatisierungstechnik 67 (1), Special Issue: Methods for a reliable wireless communication in the industry : De Gruyter, 2019, S. 69–78","chicago-de":"Ehrlich, Marco, Arne Neumann, Alexander Biendarra und Jürgen Jasperneite. 2019. Quality-of-Service Monitoring of Hybrid Industrial Communication Networks. In: at - Automatisierungstechnik 67 (1), Special Issue: Methods for a reliable wireless communication in the industry, 69–78. De Gruyter.","short":"M. Ehrlich, A. Neumann, A. Biendarra, J. Jasperneite, in: At - Automatisierungstechnik 67 (1), Special Issue: Methods for a Reliable Wireless Communication in the Industry, De Gruyter, 2019, pp. 69–78.","ama":"Ehrlich M, Neumann A, Biendarra A, Jasperneite J. Quality-of-Service Monitoring of Hybrid Industrial Communication Networks. In: At - Automatisierungstechnik 67 (1), Special Issue: Methods for a Reliable Wireless Communication in the Industry. De Gruyter; 2019:69-78.","ieee":"M. Ehrlich, A. Neumann, A. Biendarra, and J. Jasperneite, “Quality-of-Service Monitoring of Hybrid Industrial Communication Networks,” in at - Automatisierungstechnik 67 (1), Special Issue: Methods for a reliable wireless communication in the industry, 2019, pp. 69–78."},"title":"Quality-of-Service Monitoring of Hybrid Industrial Communication Networks"},{"year":2019,"author":[{"last_name":"Bunte","full_name":"Bunte, Andreas","id":"58885","first_name":"Andreas"},{"last_name":"Wunderlich","full_name":"Wunderlich, Paul","id":"52317","first_name":"Paul"},{"id":"44238","first_name":"Natalia","full_name":"Moriz, Natalia","last_name":"Moriz"},{"first_name":"Peng","last_name":"Li","id":"58937","full_name":"Li, Peng"},{"full_name":"Mankowski, Andre","id":"51482","last_name":"Mankowski","first_name":"Andre"},{"first_name":"Antje","last_name":"Rogalla","full_name":"Rogalla, Antje","id":"66617"},{"first_name":"Oliver","full_name":"Niggemann, Oliver","id":"10876","last_name":"Niggemann"}],"department":[{"_id":"DEP5023"}],"status":"public","title":"Why Symbolic AI is a Key Technology for Self-Adaption in the Context of CPPS","citation":{"apa":"Bunte, A., Wunderlich, P., Moriz, N., Li, P., Mankowski, A., Rogalla, A., & Niggemann, O. (2019). Why Symbolic AI is a Key Technology for Self-Adaption in the Context of CPPS. In 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Zaragoza, Spain.","ieee":"A. Bunte et al., “Why Symbolic AI is a Key Technology for Self-Adaption in the Context of CPPS,” in 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2019.","chicago":"Bunte, Andreas, Paul Wunderlich, Natalia Moriz, Peng Li, Andre Mankowski, Antje Rogalla, and Oliver Niggemann. “Why Symbolic AI Is a Key Technology for Self-Adaption in the Context of CPPS.” In 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Zaragoza, Spain, 2019.","van":"Bunte A, Wunderlich P, Moriz N, Li P, Mankowski A, Rogalla A, et al. Why Symbolic AI is a Key Technology for Self-Adaption in the Context of CPPS. In: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Zaragoza, Spain; 2019.","ama":"Bunte A, Wunderlich P, Moriz N, et al. Why Symbolic AI is a Key Technology for Self-Adaption in the Context of CPPS. In: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Zaragoza, Spain; 2019.","ufg":"Bunte, Andreas et. al. (2019): Why Symbolic AI is a Key Technology for Self-Adaption in the Context of CPPS, in: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Zaragoza, Spain.","mla":"Bunte, Andreas, et al. “Why Symbolic AI Is a Key Technology for Self-Adaption in the Context of CPPS.” 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2019.","havard":"A. Bunte, P. Wunderlich, N. Moriz, P. Li, A. Mankowski, A. Rogalla, O. Niggemann, Why Symbolic AI is a Key Technology for Self-Adaption in the Context of CPPS, in: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Zaragoza, Spain, 2019.","bjps":"Bunte A et al. (2019) Why Symbolic AI Is a Key Technology for Self-Adaption in the Context of CPPS. 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Zaragoza, Spain.","short":"A. Bunte, P. Wunderlich, N. Moriz, P. Li, A. Mankowski, A. Rogalla, O. Niggemann, in: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Zaragoza, Spain, 2019.","chicago-de":"Bunte, Andreas, Paul Wunderlich, Natalia Moriz, Peng Li, Andre Mankowski, Antje Rogalla und Oliver Niggemann. 2019. Why Symbolic AI is a Key Technology for Self-Adaption in the Context of CPPS. In: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Zaragoza, Spain.","din1505-2-1":"Bunte, Andreas ; Wunderlich, Paul ; Moriz, Natalia ; Li, Peng ; Mankowski, Andre ; Rogalla, Antje ; Niggemann, Oliver: Why Symbolic AI is a Key Technology for Self-Adaption in the Context of CPPS. In: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Zaragoza, Spain, 2019"},"_id":"4780","place":"Zaragoza, Spain","language":[{"iso":"eng"}],"publication":"24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)","type":"conference","date_created":"2021-02-02T08:08:34Z","user_id":"68554","date_updated":"2023-03-15T13:49:55Z"},{"keyword":["Reference Architecture","Cognition","Industrie 4.0"],"language":[{"iso":"eng"}],"publication_identifier":{"isbn":["978-1-7281-0303-7"],"eissn":["1946-0759"],"issn":["1946-0740"]},"publication":"24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)","date_created":"2021-02-02T08:10:37Z","corporate_editor":["Institute of Electrical and Electronics Engineers","Universidad de Zaragoza "],"date_updated":"2025-06-26T13:32:54Z","year":"2019","author":[{"last_name":"Bunte","first_name":"Andreas","id":"58885","full_name":"Bunte, Andreas"},{"full_name":"Fischbach, Andreas","first_name":"Andreas","last_name":"Fischbach"},{"full_name":"Strohschein, Jan","first_name":"Jan","last_name":"Strohschein"},{"last_name":"Bartz-Beielstein","first_name":"Thomas","full_name":"Bartz-Beielstein, Thomas"},{"full_name":"Faeskorn-Woyke, Heide","first_name":"Heide","last_name":"Faeskorn-Woyke"},{"id":"10876","first_name":"Oliver","full_name":"Niggemann, Oliver","last_name":"Niggemann"}],"status":"public","page":"729-736","title":"Evaluation of Cognitive Architectures for Cyber-Physical Production Systems","citation":{"chicago":"Bunte, Andreas, Andreas Fischbach, Jan Strohschein, Thomas Bartz-Beielstein, Heide Faeskorn-Woyke, and Oliver Niggemann. “Evaluation of Cognitive Architectures for Cyber-Physical Production Systems.” In 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), edited by Institute of Electrical and Electronics Engineers and Universidad de Zaragoza , 729–36. IEEE International Conference on Emerging Technologies and Factory Automation-ETFA. [Piscataway, NJ]: IEEE, 2019. https://doi.org/10.1109/etfa.2019.8869038.","apa":"Bunte, A., Fischbach, A., Strohschein, J., Bartz-Beielstein, T., Faeskorn-Woyke, H., & Niggemann, O. (2019). Evaluation of Cognitive Architectures for Cyber-Physical Production Systems. In Institute of Electrical and Electronics Engineers & Universidad de Zaragoza (Eds.), 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) (pp. 729–736). IEEE. https://doi.org/10.1109/etfa.2019.8869038","ieee":"A. Bunte, A. Fischbach, J. Strohschein, T. Bartz-Beielstein, H. Faeskorn-Woyke, and O. Niggemann, “Evaluation of Cognitive Architectures for Cyber-Physical Production Systems,” in 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Zaragoza, SPAIN, 2019, pp. 729–736. doi: 10.1109/etfa.2019.8869038.","ufg":"Bunte, Andreas u. a.: Evaluation of Cognitive Architectures for Cyber-Physical Production Systems, in: Institute of Electrical and Electronics Engineers, Universidad de Zaragoza (Hgg.): 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), [Piscataway, NJ] 2019 (IEEE International Conference on Emerging Technologies and Factory Automation-ETFA), S. 729–736.","mla":"Bunte, Andreas, et al. “Evaluation of Cognitive Architectures for Cyber-Physical Production Systems.” 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), edited by Institute of Electrical and Electronics Engineers and Universidad de Zaragoza , IEEE, 2019, pp. 729–36, https://doi.org/10.1109/etfa.2019.8869038.","bjps":"Bunte A et al. (2019) Evaluation of Cognitive Architectures for Cyber-Physical Production Systems. In Institute of Electrical and Electronics Engineers and Universidad de Zaragoza (eds), 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). [Piscataway, NJ]: IEEE, pp. 729–736.","havard":"A. Bunte, A. Fischbach, J. Strohschein, T. Bartz-Beielstein, H. Faeskorn-Woyke, O. Niggemann, Evaluation of Cognitive Architectures for Cyber-Physical Production Systems, in: Institute of Electrical and Electronics Engineers, Universidad de Zaragoza (Eds.), 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), IEEE, [Piscataway, NJ], 2019: pp. 729–736.","van":"Bunte A, Fischbach A, Strohschein J, Bartz-Beielstein T, Faeskorn-Woyke H, Niggemann O. Evaluation of Cognitive Architectures for Cyber-Physical Production Systems. In: Institute of Electrical and Electronics Engineers, Universidad de Zaragoza , editors. 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). [Piscataway, NJ]: IEEE; 2019. p. 729–36. (IEEE International Conference on Emerging Technologies and Factory Automation-ETFA).","ama":"Bunte A, Fischbach A, Strohschein J, Bartz-Beielstein T, Faeskorn-Woyke H, Niggemann O. Evaluation of Cognitive Architectures for Cyber-Physical Production Systems. In: Institute of Electrical and Electronics Engineers, Universidad de Zaragoza , eds. 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). IEEE International Conference on Emerging Technologies and Factory Automation-ETFA. IEEE; 2019:729-736. doi:10.1109/etfa.2019.8869038","din1505-2-1":"Bunte, Andreas ; Fischbach, Andreas ; Strohschein, Jan ; Bartz-Beielstein, Thomas ; Faeskorn-Woyke, Heide ; Niggemann, Oliver: Evaluation of Cognitive Architectures for Cyber-Physical Production Systems. In: Institute of Electrical and Electronics Engineers ; Universidad de Zaragoza (Hrsg.): 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), IEEE International Conference on Emerging Technologies and Factory Automation-ETFA. [Piscataway, NJ] : IEEE, 2019, S. 729–736","chicago-de":"Bunte, Andreas, Andreas Fischbach, Jan Strohschein, Thomas Bartz-Beielstein, Heide Faeskorn-Woyke und Oliver Niggemann. 2019. Evaluation of Cognitive Architectures for Cyber-Physical Production Systems. In: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), hg. von Institute of Electrical and Electronics Engineers und Universidad de Zaragoza , 729–736. IEEE International Conference on Emerging Technologies and Factory Automation-ETFA. [Piscataway, NJ]: IEEE. doi:10.1109/etfa.2019.8869038, .","short":"A. Bunte, A. Fischbach, J. Strohschein, T. Bartz-Beielstein, H. Faeskorn-Woyke, O. Niggemann, in: Institute of Electrical and Electronics Engineers, Universidad de Zaragoza (Eds.), 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), IEEE, [Piscataway, NJ], 2019, pp. 729–736."},"_id":"4781","doi":"10.1109/etfa.2019.8869038","place":"[Piscataway, NJ]","type":"conference","user_id":"83781","abstract":[{"lang":"eng","text":"Cyber-physical production systems (CPPS) integrate physical and computational resources due to increasingly available sensors and processing power. This enables the usage of data, to create additional benefit, such as condition monitoring or optimization. These capabilities can lead to cognition, such that the system is able to adapt independently to changing circumstances by learning from additional sensors information. Developing a reference architecture for the design of CPPS and standardization of machines and software interfaces is crucial to enable compatibility of data usage between different machine models and vendors. This paper analysis existing reference architecture regarding their cognitive abilities, based on requirements that are derived from three different use cases. The results from the evaluation of the reference architectures, which include two instances that stem from the field of cognitive science, reveal a gap in the applicability of the architectures regarding the generalizability and the level of abstraction. While reference architectures from the field of automation are suitable to address use case specific requirements, and do not address the general requirements, especially w.r.t. adaptability, the examples from the field of cognitive science are well usable to reach a high level of adaption and cognition. It is desirable to merge advantages of both classes of architectures to address challenges in the field of CPPS in Industrie 4.0."}],"conference":{"location":"Zaragoza, SPAIN","name":"24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)","start_date":"2019-09-10","end_date":"2019-09-13"},"department":[{"_id":"DEP5023"}],"publisher":"IEEE","series_title":"IEEE International Conference on Emerging Technologies and Factory Automation-ETFA","publication_status":"published"},{"_id":"4784","language":[{"iso":"eng"}],"publication":"arXiv e-prints","date_created":"2021-02-02T08:16:16Z","type":"journal_article","user_id":"68554","date_updated":"2023-03-15T13:49:55Z","year":2019,"author":[{"id":"58885","last_name":"Bunte","full_name":"Bunte, Andreas","first_name":"Andreas"},{"last_name":"Fischbach","full_name":"Fischbach, Andreas","first_name":"Andreas"},{"last_name":"Strohschein","first_name":"Jan","full_name":"Strohschein, Jan"},{"first_name":"Thomas","full_name":"Bartz-Beielstein, Thomas","last_name":"Bartz-Beielstein"},{"last_name":"Faeskorn-Woyke","first_name":"Heide","full_name":"Faeskorn-Woyke, Heide"},{"last_name":"Niggemann","full_name":"Niggemann, Oliver","first_name":"Oliver","id":"10876"}],"department":[{"_id":"DEP5023"}],"status":"public","title":"Evaluation of Cognitive Architectures for Cyber-Physical ProductionSystems","citation":{"din1505-2-1":"Bunte, Andreas ; Fischbach, Andreas ; Strohschein, Jan ; Bartz-Beielstein, Thomas ; Faeskorn-Woyke, Heide ; Niggemann, Oliver: Evaluation of Cognitive Architectures for Cyber-Physical ProductionSystems. In: arXiv e-prints (2019)","chicago-de":"Bunte, Andreas, Andreas Fischbach, Jan Strohschein, Thomas Bartz-Beielstein, Heide Faeskorn-Woyke und Oliver Niggemann. 2019. Evaluation of Cognitive Architectures for Cyber-Physical ProductionSystems. arXiv e-prints.","short":"A. Bunte, A. Fischbach, J. Strohschein, T. Bartz-Beielstein, H. Faeskorn-Woyke, O. Niggemann, ArXiv E-Prints (2019).","chicago":"Bunte, Andreas, Andreas Fischbach, Jan Strohschein, Thomas Bartz-Beielstein, Heide Faeskorn-Woyke, and Oliver Niggemann. “Evaluation of Cognitive Architectures for Cyber-Physical ProductionSystems.” ArXiv E-Prints, 2019.","apa":"Bunte, A., Fischbach, A., Strohschein, J., Bartz-Beielstein, T., Faeskorn-Woyke, H., & Niggemann, O. (2019). Evaluation of Cognitive Architectures for Cyber-Physical ProductionSystems. ArXiv E-Prints.","havard":"A. Bunte, A. Fischbach, J. Strohschein, T. Bartz-Beielstein, H. Faeskorn-Woyke, O. Niggemann, Evaluation of Cognitive Architectures for Cyber-Physical ProductionSystems, ArXiv E-Prints. (2019).","bjps":"Bunte A et al. (2019) Evaluation of Cognitive Architectures for Cyber-Physical ProductionSystems. arXiv e-prints.","mla":"Bunte, Andreas, et al. “Evaluation of Cognitive Architectures for Cyber-Physical ProductionSystems.” ArXiv E-Prints, 2019.","ufg":"Bunte, Andreas et. al. (2019): Evaluation of Cognitive Architectures for Cyber-Physical ProductionSystems, in: arXiv e-prints.","van":"Bunte A, Fischbach A, Strohschein J, Bartz-Beielstein T, Faeskorn-Woyke H, Niggemann O. Evaluation of Cognitive Architectures for Cyber-Physical ProductionSystems. arXiv e-prints. 2019;","ieee":"A. Bunte, A. Fischbach, J. Strohschein, T. Bartz-Beielstein, H. Faeskorn-Woyke, and O. Niggemann, “Evaluation of Cognitive Architectures for Cyber-Physical ProductionSystems,” arXiv e-prints, 2019.","ama":"Bunte A, Fischbach A, Strohschein J, Bartz-Beielstein T, Faeskorn-Woyke H, Niggemann O. Evaluation of Cognitive Architectures for Cyber-Physical ProductionSystems. arXiv e-prints. 2019."}},{"_id":"4785","place":"Hawaii, USA","language":[{"iso":"eng"}],"user_id":"68554","date_updated":"2023-03-15T13:49:55Z","date_created":"2021-02-02T08:18:13Z","type":"conference","publisher":"Thirty-Third AAAI Conference on Artificial Intelligence (AAAI-19)","status":"public","year":2019,"author":[{"first_name":"Andreas","full_name":"Bunte, Andreas","id":"58885","last_name":"Bunte"},{"full_name":"Stein, Benno","last_name":"Stein","first_name":"Benno"},{"full_name":"Niggemann, Oliver","id":"10876","first_name":"Oliver","last_name":"Niggemann"}],"department":[{"_id":"DEP5023"}],"citation":{"short":"A. Bunte, B. Stein, O. Niggemann, in: Thirty-Third AAAI Conference on Artificial Intelligence (AAAI-19), Hawaii, USA, 2019.","din1505-2-1":"Bunte, Andreas ; Stein, Benno ; Niggemann, Oliver: Model-Based Diagnosis for Cyber-Physical Production Systems Based on Machine Learning and Residual-Based Diagnosis Models. In: . Hawaii, USA : Thirty-Third AAAI Conference on Artificial Intelligence (AAAI-19), 2019","chicago-de":"Bunte, Andreas, Benno Stein und Oliver Niggemann. 2019. Model-Based Diagnosis for Cyber-Physical Production Systems Based on Machine Learning and Residual-Based Diagnosis Models. In: . Hawaii, USA: Thirty-Third AAAI Conference on Artificial Intelligence (AAAI-19).","apa":"Bunte, A., Stein, B., & Niggemann, O. (2019). Model-Based Diagnosis for Cyber-Physical Production Systems Based on Machine Learning and Residual-Based Diagnosis Models. Hawaii, USA: Thirty-Third AAAI Conference on Artificial Intelligence (AAAI-19).","chicago":"Bunte, Andreas, Benno Stein, and Oliver Niggemann. “Model-Based Diagnosis for Cyber-Physical Production Systems Based on Machine Learning and Residual-Based Diagnosis Models.” Hawaii, USA: Thirty-Third AAAI Conference on Artificial Intelligence (AAAI-19), 2019.","van":"Bunte A, Stein B, Niggemann O. Model-Based Diagnosis for Cyber-Physical Production Systems Based on Machine Learning and Residual-Based Diagnosis Models. In Hawaii, USA: Thirty-Third AAAI Conference on Artificial Intelligence (AAAI-19); 2019.","mla":"Bunte, Andreas, et al. Model-Based Diagnosis for Cyber-Physical Production Systems Based on Machine Learning and Residual-Based Diagnosis Models. Thirty-Third AAAI Conference on Artificial Intelligence (AAAI-19), 2019.","bjps":"Bunte A, Stein B and Niggemann O (2019) Model-Based Diagnosis for Cyber-Physical Production Systems Based on Machine Learning and Residual-Based Diagnosis Models. Hawaii, USA: Thirty-Third AAAI Conference on Artificial Intelligence (AAAI-19).","havard":"A. Bunte, B. Stein, O. Niggemann, Model-Based Diagnosis for Cyber-Physical Production Systems Based on Machine Learning and Residual-Based Diagnosis Models, in: Thirty-Third AAAI Conference on Artificial Intelligence (AAAI-19), Hawaii, USA, 2019.","ufg":"Bunte, Andreas et. al. (2019): Model-Based Diagnosis for Cyber-Physical Production Systems Based on Machine Learning and Residual-Based Diagnosis Models, in: , Hawaii, USA.","ieee":"A. Bunte, B. Stein, and O. Niggemann, “Model-Based Diagnosis for Cyber-Physical Production Systems Based on Machine Learning and Residual-Based Diagnosis Models,” 2019.","ama":"Bunte A, Stein B, Niggemann O. Model-Based Diagnosis for Cyber-Physical Production Systems Based on Machine Learning and Residual-Based Diagnosis Models. In: Hawaii, USA: Thirty-Third AAAI Conference on Artificial Intelligence (AAAI-19); 2019."},"title":"Model-Based Diagnosis for Cyber-Physical Production Systems Based on Machine Learning and Residual-Based Diagnosis Models"},{"user_id":"68554","date_updated":"2023-03-15T13:49:55Z","publication":"Proceedings 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)","type":"conference","date_created":"2021-02-02T09:05:35Z","_id":"4800","place":"Zaragoza, Spain","language":[{"iso":"eng"}],"citation":{"ama":"Sehr P, Moriz N. Partitioning Manual Assembly Workstations for Flexible Manufacturing. In: Proceedings 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Zaragoza, Spain; 2019.","ieee":"P. Sehr and N. Moriz, “Partitioning Manual Assembly Workstations for Flexible Manufacturing,” in Proceedings 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2019.","short":"P. Sehr, N. Moriz, in: Proceedings 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Zaragoza, Spain, 2019.","din1505-2-1":"Sehr, Philip ; Moriz, Natalia: Partitioning Manual Assembly Workstations for Flexible Manufacturing. In: Proceedings 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Zaragoza, Spain, 2019","chicago-de":"Sehr, Philip und Natalia Moriz. 2019. Partitioning Manual Assembly Workstations for Flexible Manufacturing. In: Proceedings 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Zaragoza, Spain.","van":"Sehr P, Moriz N. Partitioning Manual Assembly Workstations for Flexible Manufacturing. In: Proceedings 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Zaragoza, Spain; 2019.","bjps":"Sehr P and Moriz N (2019) Partitioning Manual Assembly Workstations for Flexible Manufacturing. Proceedings 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Zaragoza, Spain.","havard":"P. Sehr, N. Moriz, Partitioning Manual Assembly Workstations for Flexible Manufacturing, in: Proceedings 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Zaragoza, Spain, 2019.","mla":"Sehr, Philip, and Natalia Moriz. “Partitioning Manual Assembly Workstations for Flexible Manufacturing.” Proceedings 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2019.","ufg":"Sehr, Philip/Moriz, Natalia (2019): Partitioning Manual Assembly Workstations for Flexible Manufacturing, in: Proceedings 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Zaragoza, Spain.","apa":"Sehr, P., & Moriz, N. (2019). Partitioning Manual Assembly Workstations for Flexible Manufacturing. In Proceedings 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Zaragoza, Spain.","chicago":"Sehr, Philip, and Natalia Moriz. “Partitioning Manual Assembly Workstations for Flexible Manufacturing.” In Proceedings 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Zaragoza, Spain, 2019."},"title":"Partitioning Manual Assembly Workstations for Flexible Manufacturing","status":"public","year":2019,"author":[{"first_name":"Philip","last_name":"Sehr","id":"71582","full_name":"Sehr, Philip"},{"first_name":"Natalia","full_name":"Moriz, Natalia","id":"44238","last_name":"Moriz"}],"department":[{"_id":"DEP5023"}]},{"date_updated":"2023-03-15T13:49:55Z","user_id":"74004","type":"conference","date_created":"2021-02-02T09:06:35Z","publication":"AUTOMATION 2019: Autonomous Systems and 5G in Connected Industries","language":[{"iso":"ger"}],"place":"Baden-Baden","_id":"4801","citation":{"ufg":"Sehr, Philip et. al. (2019): Ansätze für Komplexitätsreduktion in manuellen Montageprozessen, in: AUTOMATION 2019: Autonomous Systems and 5G in Connected Industries, Baden-Baden, S. 671–682.","bjps":"Sehr P et al. (2019) Ansätze für Komplexitätsreduktion in manuellen Montageprozessen. AUTOMATION 2019: Autonomous Systems and 5G in Connected Industries. Baden-Baden: VDI, pp. 671–682.","havard":"P. Sehr, N. Moriz, S. Bendzioch, S. Hinrichsen, Ansätze für Komplexitätsreduktion in manuellen Montageprozessen, in: AUTOMATION 2019: Autonomous Systems and 5G in Connected Industries, VDI, Baden-Baden, 2019: pp. 671–682.","mla":"Sehr, Philip, et al. “Ansätze für Komplexitätsreduktion in manuellen Montageprozessen.” AUTOMATION 2019: Autonomous Systems and 5G in Connected Industries, VDI, 2019, pp. 671–82.","van":"Sehr P, Moriz N, Bendzioch S, Hinrichsen S. Ansätze für Komplexitätsreduktion in manuellen Montageprozessen. In: AUTOMATION 2019: Autonomous Systems and 5G in Connected Industries. Baden-Baden: VDI; 2019. p. 671–82.","chicago":"Sehr, Philip, Natalia Moriz, Sven Bendzioch, and Sven Hinrichsen. “Ansätze für Komplexitätsreduktion in manuellen Montageprozessen.” In AUTOMATION 2019: Autonomous Systems and 5G in Connected Industries, 671–82. Baden-Baden: VDI, 2019.","apa":"Sehr, P., Moriz, N., Bendzioch, S., & Hinrichsen, S. (2019). Ansätze für Komplexitätsreduktion in manuellen Montageprozessen. In AUTOMATION 2019: Autonomous Systems and 5G in Connected Industries (pp. 671–682). Baden-Baden: VDI.","chicago-de":"Sehr, Philip, Natalia Moriz, Sven Bendzioch und Sven Hinrichsen. 2019. Ansätze für Komplexitätsreduktion in manuellen Montageprozessen. In: AUTOMATION 2019: Autonomous Systems and 5G in Connected Industries, 671–682. Baden-Baden: VDI.","din1505-2-1":"Sehr, Philip ; Moriz, Natalia ; Bendzioch, Sven ; Hinrichsen, Sven: Ansätze für Komplexitätsreduktion in manuellen Montageprozessen. In: AUTOMATION 2019: Autonomous Systems and 5G in Connected Industries. Baden-Baden : VDI, 2019, S. 671–682","short":"P. Sehr, N. Moriz, S. Bendzioch, S. Hinrichsen, in: AUTOMATION 2019: Autonomous Systems and 5G in Connected Industries, VDI, Baden-Baden, 2019, pp. 671–682.","ama":"Sehr P, Moriz N, Bendzioch S, Hinrichsen S. Ansätze für Komplexitätsreduktion in manuellen Montageprozessen. In: AUTOMATION 2019: Autonomous Systems and 5G in Connected Industries. Baden-Baden: VDI; 2019:671-682.","ieee":"P. Sehr, N. Moriz, S. Bendzioch, and S. Hinrichsen, “Ansätze für Komplexitätsreduktion in manuellen Montageprozessen,” in AUTOMATION 2019: Autonomous Systems and 5G in Connected Industries, 2019, pp. 671–682."},"title":"Ansätze für Komplexitätsreduktion in manuellen Montageprozessen","page":"671 - 682","status":"public","publisher":"VDI","department":[{"_id":"DEP5023"},{"_id":"DEP7020"},{"_id":"DEP1305"}],"author":[{"full_name":"Sehr, Philip","first_name":"Philip","last_name":"Sehr","id":"71582"},{"first_name":"Natalia","id":"44238","full_name":"Moriz, Natalia","last_name":"Moriz"},{"first_name":"Sven","last_name":"Bendzioch","full_name":"Bendzioch, Sven","id":"71395"},{"full_name":"Hinrichsen, Sven","last_name":"Hinrichsen","id":"49010","first_name":"Sven"}],"year":2019,"abstract":[{"lang":"ger","text":"Die manuelle Montage ist in einzelnen Branchen des Verarbeitenden Gewerbes von hoher Bedeutung. Industrielle Trends nach individualisierten Produkten in geringen Losgrößen steigern dabei die Komplexität in der manuellen Montage. In der Folge kann es zu einer erhöhten mentalen Beanspruchung der Beschäftigten kommen, wodurch Montagefehler häufiger auftreten und die Produktivität sinkt. Der vorliegende Beitrag präsentiert zwei Anwendungsfälle, in denen verschiedene Ansätze gezeigt werden, diesem Effekt entgegen zu wirken. Im ersten Anwendungsfall wird ein informatorisches Assistenzsystem eingesetzt, um Montageinformationen besser an die Bedürfnisse der Mitarbeiter anzupassen. Im zweiten Anwendungsfall wird ein bestehendes Montagesystem modularisiert. Die Anordnung der Bauteile in den einzelnen Modulen wird algorithmisch so optimiert, dass Laufwege zwischen den Modulen minimiert werden."}]},{"title":"Das DC-Netz für die Produktion","citation":{"short":"H. Borcherding, Computer & Automation (2019).","din1505-2-1":"Borcherding, Holger: Das DC-Netz für die Produktion. In: Computer & Automation. Haar, WEKA Fachmedien GmbH (2019), Nr. 3","chicago-de":"Borcherding, Holger. 2019. Das DC-Netz für die Produktion. Computer & Automation, Nr. 3.","apa":"Borcherding, H. (2019). Das DC-Netz für die Produktion. Computer & Automation, (3).","chicago":"Borcherding, Holger. “Das DC-Netz Für Die Produktion.” Computer & Automation, no. 3 (2019).","van":"Borcherding H. Das DC-Netz für die Produktion. Computer & Automation. 2019;(3).","havard":"H. Borcherding, Das DC-Netz für die Produktion, Computer & Automation. (2019).","bjps":"Borcherding H (2019) Das DC-Netz Für Die Produktion. Computer & Automation.","mla":"Borcherding, Holger. “Das DC-Netz Für Die Produktion.” Computer & Automation, no. 3, WEKA Fachmedien GmbH, 2019.","ufg":"Borcherding, Holger (2019): Das DC-Netz für die Produktion, in: Computer & Automation (3).","ieee":"H. Borcherding, “Das DC-Netz für die Produktion,” Computer & Automation, no. 3, 2019.","ama":"Borcherding H. Das DC-Netz für die Produktion. Computer & Automation. 2019;(3)."},"publication_status":"published","issue":"3","author":[{"last_name":"Borcherding","first_name":"Holger","id":"1693","full_name":"Borcherding, Holger"}],"year":2019,"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"publisher":"WEKA Fachmedien GmbH","status":"public","publication":"Computer & Automation","publication_identifier":{"issn":["1615-8512"]},"type":"industry_journal_article","date_created":"2021-02-08T10:57:16Z","user_id":"79260","date_updated":"2023-03-15T13:49:56Z","_id":"4900","place":"Haar","language":[{"iso":"eng"}]},{"edition":"10","type":"book","date_created":"2021-02-08T11:06:44Z","publication_identifier":{"isbn":["978-3-446-45953-3"]},"intvolume":" 1","date_updated":"2024-03-22T12:12:23Z","user_id":"83781","_id":"4902","language":[{"iso":"ger"}],"place":"München","title":"Stationäre Vorgänge","series_title":"Grundgebiete der Elektrotechnik","publication_status":"published","volume":1,"citation":{"ufg":"Führer, Arnold u. a.: Stationäre Vorgänge, Bd. 1, München 102019 (Grundgebiete der Elektrotechnik).","havard":"A. Führer, K. Heidemann, W. Nerreter, H. Borcherding, U. Meier, Stationäre Vorgänge, 10th ed., Carl Hanser Verlag, München, 2019.","bjps":"Führer A et al. (2019) Stationäre Vorgänge, 10th ed. München: Carl Hanser Verlag.","mla":"Führer, Arnold, et al. Stationäre Vorgänge. 10th ed., vol. 1, Carl Hanser Verlag, 2019.","van":"Führer A, Heidemann K, Nerreter W, Borcherding H, Meier U. Stationäre Vorgänge. 10th ed. München: Carl Hanser Verlag; 2019. (Grundgebiete der Elektrotechnik; vol. 1).","ama":"Führer A, Heidemann K, Nerreter W, Borcherding H, Meier U. Stationäre Vorgänge. Vol 1. 10th ed. Carl Hanser Verlag; 2019.","chicago":"Führer, Arnold, Klaus Heidemann, Wolfgang Nerreter, Holger Borcherding, and Uwe Meier. Stationäre Vorgänge. 10th ed. Vol. 1. Grundgebiete der Elektrotechnik. München: Carl Hanser Verlag, 2019.","apa":"Führer, A., Heidemann, K., Nerreter, W., Borcherding, H., & Meier, U. (2019). Stationäre Vorgänge (10th ed., Vol. 1). Carl Hanser Verlag.","ieee":"A. Führer, K. Heidemann, W. Nerreter, H. Borcherding, and U. Meier, Stationäre Vorgänge, 10th ed., vol. 1. München: Carl Hanser Verlag, 2019.","din1505-2-1":"Führer, Arnold ; Heidemann, Klaus ; Nerreter, Wolfgang ; Borcherding, Holger ; Meier, Uwe: Stationäre Vorgänge, Grundgebiete der Elektrotechnik. Bd. 1. 10. Aufl. München : Carl Hanser Verlag, 2019","chicago-de":"Führer, Arnold, Klaus Heidemann, Wolfgang Nerreter, Holger Borcherding und Uwe Meier. 2019. Stationäre Vorgänge. 10. Aufl. Bd. 1. Grundgebiete der Elektrotechnik. München: Carl Hanser Verlag.","short":"A. Führer, K. Heidemann, W. Nerreter, H. Borcherding, U. Meier, Stationäre Vorgänge, 10th ed., Carl Hanser Verlag, München, 2019."},"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"year":"2019","author":[{"full_name":"Führer, Arnold","last_name":"Führer","first_name":"Arnold"},{"last_name":"Heidemann","full_name":"Heidemann, Klaus","first_name":"Klaus"},{"first_name":"Wolfgang","id":"56893","last_name":"Nerreter","full_name":"Nerreter, Wolfgang"},{"full_name":"Borcherding, Holger","first_name":"Holger","last_name":"Borcherding","id":"1693"},{"full_name":"Meier, Uwe","last_name":"Meier","id":"1143","first_name":"Uwe"}],"publisher":"Carl Hanser Verlag","status":"public"},{"language":[{"iso":"ger"}],"place":"München","_id":"4903","type":"book","date_created":"2021-02-08T11:06:44Z","publication_identifier":{"isbn":["978-3-446-46203-8"]},"date_updated":"2023-03-15T13:49:56Z","user_id":"64800","department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"author":[{"first_name":"Arnold","full_name":"Führer, Arnold","last_name":"Führer"},{"last_name":"Heidemann","full_name":"Heidemann, Klaus","first_name":"Klaus"},{"first_name":"Wolfgang","full_name":"Nerreter, Wolfgang","id":"56893","last_name":"Nerreter"},{"full_name":"Borcherding, Holger","last_name":"Borcherding","id":"1693","first_name":"Holger"},{"first_name":"Uwe","last_name":"Meier","full_name":"Meier, Uwe","id":"1143"}],"year":2019,"status":"public","publisher":"Carl Hanser Verlag","title":"Elektrotechnik für das Studium in 2 Bänden","publication_status":"published","citation":{"chicago":"Führer, Arnold, Klaus Heidemann, Wolfgang Nerreter, Holger Borcherding, and Uwe Meier. Elektrotechnik für das Studium in 2 Bänden. München: Carl Hanser Verlag, 2019.","apa":"Führer, A., Heidemann, K., Nerreter, W., Borcherding, H., & Meier, U. (2019). Elektrotechnik für das Studium in 2 Bänden. München: Carl Hanser Verlag.","ufg":"Führer, Arnold et. al. (2019): Elektrotechnik für das Studium in 2 Bänden, München.","bjps":"Führer A et al. (2019) Elektrotechnik für das Studium in 2 Bänden. München: Carl Hanser Verlag.","havard":"A. Führer, K. Heidemann, W. Nerreter, H. Borcherding, U. Meier, Elektrotechnik für das Studium in 2 Bänden, Carl Hanser Verlag, München, 2019.","mla":"Führer, Arnold, et al. Elektrotechnik für das Studium in 2 Bänden. Carl Hanser Verlag, 2019.","van":"Führer A, Heidemann K, Nerreter W, Borcherding H, Meier U. Elektrotechnik für das Studium in 2 Bänden. München: Carl Hanser Verlag; 2019.","din1505-2-1":"Führer, Arnold ; Heidemann, Klaus ; Nerreter, Wolfgang ; Borcherding, Holger ; Meier, Uwe: Elektrotechnik für das Studium in 2 Bänden. München : Carl Hanser Verlag, 2019","chicago-de":"Führer, Arnold, Klaus Heidemann, Wolfgang Nerreter, Holger Borcherding und Uwe Meier. 2019. Elektrotechnik für das Studium in 2 Bänden. München: Carl Hanser Verlag.","short":"A. Führer, K. Heidemann, W. Nerreter, H. Borcherding, U. Meier, Elektrotechnik für das Studium in 2 Bänden, Carl Hanser Verlag, München, 2019.","ieee":"A. Führer, K. Heidemann, W. Nerreter, H. Borcherding, and U. Meier, Elektrotechnik für das Studium in 2 Bänden. München: Carl Hanser Verlag, 2019.","ama":"Führer A, Heidemann K, Nerreter W, Borcherding H, Meier U. Elektrotechnik für das Studium in 2 Bänden. München: Carl Hanser Verlag; 2019."}},{"author":[{"first_name":"Arnold","last_name":"Führer","full_name":"Führer, Arnold"},{"full_name":"Heidemann, Klaus","last_name":"Heidemann","first_name":"Klaus"},{"last_name":"Nerreter","full_name":"Nerreter, Wolfgang","id":"56893","first_name":"Wolfgang"},{"last_name":"Borcherding","first_name":"Holger","id":"1693","full_name":"Borcherding, Holger"},{"full_name":"Meier, Uwe","id":"1143","last_name":"Meier","first_name":"Uwe"}],"year":"2019","main_file_link":[{"url":"https://www.hanser-elibrary.com/doi/abs/10.3139/9783446430549.fm"}],"status":"public","page":"320","title":" Zeitabhängige Vorgänge","volume":2,"citation":{"ieee":"A. Führer, K. Heidemann, W. Nerreter, H. Borcherding, and U. Meier, Zeitabhängige Vorgänge, 10th ed., vol. 2. München: Carl Hanser Verlag, 2019.","ama":"Führer A, Heidemann K, Nerreter W, Borcherding H, Meier U. Zeitabhängige Vorgänge. Vol 2. 10th ed. Carl Hanser Verlag; 2019.","short":"A. Führer, K. Heidemann, W. Nerreter, H. Borcherding, U. Meier, Zeitabhängige Vorgänge, 10th ed., Carl Hanser Verlag, München, 2019.","din1505-2-1":"Führer, Arnold ; Heidemann, Klaus ; Nerreter, Wolfgang ; Borcherding, Holger ; Meier, Uwe: Zeitabhängige Vorgänge, Grundgebiete der Elektrotechnik. Bd. 2. 10. Aufl. München : Carl Hanser Verlag, 2019","chicago-de":"Führer, Arnold, Klaus Heidemann, Wolfgang Nerreter, Holger Borcherding und Uwe Meier. 2019. Zeitabhängige Vorgänge. 10. Aufl. Bd. 2. Grundgebiete der Elektrotechnik. München: Carl Hanser Verlag.","apa":"Führer, A., Heidemann, K., Nerreter, W., Borcherding, H., & Meier, U. (2019). Zeitabhängige Vorgänge (10th ed., Vol. 2). Carl Hanser Verlag.","chicago":"Führer, Arnold, Klaus Heidemann, Wolfgang Nerreter, Holger Borcherding, and Uwe Meier. Zeitabhängige Vorgänge. 10th ed. Vol. 2. Grundgebiete der Elektrotechnik. München: Carl Hanser Verlag, 2019.","van":"Führer A, Heidemann K, Nerreter W, Borcherding H, Meier U. Zeitabhängige Vorgänge. 10th ed. München: Carl Hanser Verlag; 2019. 320 p. (Grundgebiete der Elektrotechnik; vol. 2).","havard":"A. Führer, K. Heidemann, W. Nerreter, H. Borcherding, U. Meier, Zeitabhängige Vorgänge, 10th ed., Carl Hanser Verlag, München, 2019.","mla":"Führer, Arnold, et al. Zeitabhängige Vorgänge. 10th ed., vol. 2, Carl Hanser Verlag, 2019.","bjps":"Führer A et al. (2019) Zeitabhängige Vorgänge, 10th ed. München: Carl Hanser Verlag.","ufg":"Führer, Arnold u. a.: Zeitabhängige Vorgänge, Bd. 2, München 102019 (Grundgebiete der Elektrotechnik)."},"language":[{"iso":"ger"}],"publication_identifier":{"eisbn":["978-3-446-46093-5 "],"isbn":["978-3-446-45954-0 "]},"date_created":"2021-02-08T11:14:28Z","edition":"10","date_updated":"2024-03-22T12:41:09Z","department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"publisher":"Carl Hanser Verlag","series_title":"Grundgebiete der Elektrotechnik","publication_status":"published","place":"München","_id":"4904","type":"book","user_id":"83781","intvolume":" 2"},{"status":"public","publisher":"VDE-Verlag","year":2019,"author":[{"full_name":"Puls, Simon","first_name":"Simon","last_name":"Puls"},{"full_name":"Austermann, Johann","id":"42114","last_name":"Austermann","first_name":"Johann"},{"first_name":"Holger","full_name":"Borcherding, Holger","id":"1693","last_name":"Borcherding"}],"main_file_link":[{"url":"https://ieeexplore.ieee.org/document/8767660"}],"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"conference":{"start_date":"2019-05-07","end_date":"2021-05-09","location":"Nürnberg","name":"PCIM Europe 2019"},"abstract":[{"text":"This article deals with the determination of the lifetime of electrolytic capacitors operating in industrial DC micro grids, which are characterized by a particular large number of electrical drives. In addition to the advantages of such a DC grid, a test setup is proposed as a solution that allows an easy device testing. The paper shows with the help of simulations and practical measurements that if every device passes this test, it can be ensured that no capacitor in the DC grid is overloaded at all.","lang":"eng"}],"citation":{"van":"Puls S, Austermann J, Borcherding H. Dimensioning and Lifespan Estimation of Electrolytic Capacitors in Industrial DC micro Grids. Mesago Messe Frankfurt GmbH, editor. PCIM Europe 2019; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management. Berlin: VDE-Verlag; 2019.","ama":"Puls S, Austermann J, Borcherding H. Dimensioning and Lifespan Estimation of Electrolytic Capacitors in Industrial DC Micro Grids. (Mesago Messe Frankfurt GmbH, ed.). Berlin: VDE-Verlag; 2019.","ufg":"Puls, Simon et. al. (2019): Dimensioning and Lifespan Estimation of Electrolytic Capacitors in Industrial DC micro Grids, Berlin.","havard":"S. Puls, J. Austermann, H. Borcherding, Dimensioning and Lifespan Estimation of Electrolytic Capacitors in Industrial DC micro Grids, VDE-Verlag, Berlin, 2019.","mla":"Puls, Simon, et al. “Dimensioning and Lifespan Estimation of Electrolytic Capacitors in Industrial DC Micro Grids.” PCIM Europe 2019; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, edited by Mesago Messe Frankfurt GmbH, VDE-Verlag, 2019.","bjps":"Puls S, Austermann J and Borcherding H (2019) Dimensioning and Lifespan Estimation of Electrolytic Capacitors in Industrial DC Micro Grids, Mesago Messe Frankfurt GmbH (ed.). Berlin: VDE-Verlag.","apa":"Puls, S., Austermann, J., & Borcherding, H. (2019). Dimensioning and Lifespan Estimation of Electrolytic Capacitors in Industrial DC micro Grids. (Mesago Messe Frankfurt GmbH, Ed.), PCIM Europe 2019; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management. Berlin: VDE-Verlag.","ieee":"S. Puls, J. Austermann, and H. Borcherding, Dimensioning and Lifespan Estimation of Electrolytic Capacitors in Industrial DC micro Grids. Berlin: VDE-Verlag, 2019.","chicago":"Puls, Simon, Johann Austermann, and Holger Borcherding. Dimensioning and Lifespan Estimation of Electrolytic Capacitors in Industrial DC Micro Grids. Edited by Mesago Messe Frankfurt GmbH. PCIM Europe 2019; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management. Berlin: VDE-Verlag, 2019.","short":"S. Puls, J. Austermann, H. Borcherding, Dimensioning and Lifespan Estimation of Electrolytic Capacitors in Industrial DC Micro Grids, VDE-Verlag, Berlin, 2019.","din1505-2-1":"Puls, Simon ; Austermann, Johann ; Borcherding, Holger ; Mesago Messe Frankfurt GmbH (Hrsg.): Dimensioning and Lifespan Estimation of Electrolytic Capacitors in Industrial DC micro Grids. Berlin : VDE-Verlag, 2019","chicago-de":"Puls, Simon, Johann Austermann und Holger Borcherding. 2019. Dimensioning and Lifespan Estimation of Electrolytic Capacitors in Industrial DC micro Grids. Hg. von Mesago Messe Frankfurt GmbH. PCIM Europe 2019; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management. Berlin: VDE-Verlag."},"publication_status":"published","title":"Dimensioning and Lifespan Estimation of Electrolytic Capacitors in Industrial DC micro Grids","place":"Berlin","language":[{"iso":"eng"}],"_id":"4914","user_id":"79260","date_updated":"2023-03-15T13:49:56Z","corporate_editor":["Mesago Messe Frankfurt GmbH"],"publication":"PCIM Europe 2019; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management","publication_identifier":{"isbn":["978-3-8007-4938-6"]},"type":"conference_editor_article","date_created":"2020-12-10T14:09:16Z"},{"language":[{"iso":"eng"}],"_id":"5104","date_created":"2021-03-02T08:22:13Z","type":"journal_article","publication":"Journal of Facade Design and Engineering","date_updated":"2023-03-15T13:49:57Z","user_id":"45673","intvolume":" 7","department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"author":[{"first_name":"Mark E.","full_name":"Alston, Mark E.","last_name":"Alston"},{"id":"27166","last_name":"Pottgiesser","full_name":"Pottgiesser, Uta","first_name":"Uta","orcid":"0000-0002-8594-3168"},{"last_name":"Knaack","first_name":"Ulrich","id":"27160","full_name":"Knaack, Ulrich"}],"year":2019,"issue":"1","page":"89-100","status":"public","quality_controlled":"1","title":"Bio-inspired transparent microfluidic platform as transformable networks for solar modulation","publication_status":"published","citation":{"short":"M.E. Alston, U. Pottgiesser, U. Knaack, Journal of Facade Design and Engineering 7 (2019) 89–100.","chicago-de":"Alston, Mark E., Uta Pottgiesser und Ulrich Knaack. 2019. Bio-inspired transparent microfluidic platform as transformable networks for solar modulation. Journal of Facade Design and Engineering 7, Nr. 1: 89–100.","din1505-2-1":"Alston, Mark E. ; Pottgiesser, Uta ; Knaack, Ulrich: Bio-inspired transparent microfluidic platform as transformable networks for solar modulation. In: Journal of Facade Design and Engineering Bd. 7 (2019), Nr. 1, S. 89–100","van":"Alston ME, Pottgiesser U, Knaack U. Bio-inspired transparent microfluidic platform as transformable networks for solar modulation. Journal of Facade Design and Engineering. 2019;7(1):89–100.","ama":"Alston ME, Pottgiesser U, Knaack U. Bio-inspired transparent microfluidic platform as transformable networks for solar modulation. Journal of Facade Design and Engineering. 2019;7(1):89-100.","ufg":"Alston, Mark E. et. al. (2019): Bio-inspired transparent microfluidic platform as transformable networks for solar modulation, in: Journal of Facade Design and Engineering 7 (1), S. 89–100.","bjps":"Alston ME, Pottgiesser U and Knaack U (2019) Bio-Inspired Transparent Microfluidic Platform as Transformable Networks for Solar Modulation. Journal of Facade Design and Engineering 7, 89–100.","mla":"Alston, Mark E., et al. “Bio-Inspired Transparent Microfluidic Platform as Transformable Networks for Solar Modulation.” Journal of Facade Design and Engineering, vol. 7, no. 1, 2019, pp. 89–100.","havard":"M.E. Alston, U. Pottgiesser, U. Knaack, Bio-inspired transparent microfluidic platform as transformable networks for solar modulation, Journal of Facade Design and Engineering. 7 (2019) 89–100.","apa":"Alston, M. E., Pottgiesser, U., & Knaack, U. (2019). Bio-inspired transparent microfluidic platform as transformable networks for solar modulation. Journal of Facade Design and Engineering, 7(1), 89–100.","ieee":"M. E. Alston, U. Pottgiesser, and U. Knaack, “Bio-inspired transparent microfluidic platform as transformable networks for solar modulation,” Journal of Facade Design and Engineering, vol. 7, no. 1, pp. 89–100, 2019.","chicago":"Alston, Mark E., Uta Pottgiesser, and Ulrich Knaack. “Bio-Inspired Transparent Microfluidic Platform as Transformable Networks for Solar Modulation.” Journal of Facade Design and Engineering 7, no. 1 (2019): 89–100."},"volume":7},{"page":"256","status":"public","publisher":"Birkhäuser ","department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"year":2019,"author":[{"last_name":"Ayón","first_name":"Angel","full_name":"Ayón, Angel"},{"orcid":"0000-0002-8594-3168","full_name":"Pottgiesser, Uta","last_name":"Pottgiesser","id":"27166","first_name":"Uta"},{"full_name":"Richards, Nathaniel","first_name":"Nathaniel","last_name":"Richards"}],"publication_status":"published","citation":{"short":"A. Ayón, U. Pottgiesser, N. Richards, Neue Fassaden im Bestand. Sanierungsstrategien für Klassiker der Moderne , Birkhäuser , Basel, Berlin, Boston , 2019.","din1505-2-1":"Ayón, Angel ; Pottgiesser, Uta ; Richards, Nathaniel: Neue Fassaden im Bestand. Sanierungsstrategien für Klassiker der Moderne . Basel, Berlin, Boston : Birkhäuser , 2019","chicago-de":"Ayón, Angel, Uta Pottgiesser und Nathaniel Richards. 2019. Neue Fassaden im Bestand. Sanierungsstrategien für Klassiker der Moderne . Basel, Berlin, Boston : Birkhäuser .","van":"Ayón A, Pottgiesser U, Richards N. Neue Fassaden im Bestand. Sanierungsstrategien für Klassiker der Moderne . Basel, Berlin, Boston : Birkhäuser ; 2019. 256 p.","havard":"A. Ayón, U. Pottgiesser, N. Richards, Neue Fassaden im Bestand. Sanierungsstrategien für Klassiker der Moderne , Birkhäuser , Basel, Berlin, Boston , 2019.","bjps":"Ayón A, Pottgiesser U and Richards N (2019) Neue Fassaden im Bestand. Sanierungsstrategien für Klassiker der Moderne . Basel, Berlin, Boston : Birkhäuser .","mla":"Ayón, Angel, et al. Neue Fassaden im Bestand. Sanierungsstrategien für Klassiker der Moderne . Birkhäuser , 2019.","ufg":"Ayón, Angel et. al. (2019): Neue Fassaden im Bestand. Sanierungsstrategien für Klassiker der Moderne , Basel, Berlin, Boston .","apa":"Ayón, A., Pottgiesser, U., & Richards, N. (2019). Neue Fassaden im Bestand. Sanierungsstrategien für Klassiker der Moderne . Basel, Berlin, Boston : Birkhäuser .","chicago":"Ayón, Angel, Uta Pottgiesser, and Nathaniel Richards. Neue Fassaden im Bestand. Sanierungsstrategien für Klassiker der Moderne . Basel, Berlin, Boston : Birkhäuser , 2019.","ama":"Ayón A, Pottgiesser U, Richards N. Neue Fassaden im Bestand. Sanierungsstrategien für Klassiker der Moderne . Basel, Berlin, Boston : Birkhäuser ; 2019.","ieee":"A. Ayón, U. Pottgiesser, and N. Richards, Neue Fassaden im Bestand. Sanierungsstrategien für Klassiker der Moderne . Basel, Berlin, Boston : Birkhäuser , 2019."},"title":"Neue Fassaden im Bestand. Sanierungsstrategien für Klassiker der Moderne ","language":[{"iso":"ger"}],"keyword":["Fassade","Glasbau","Modernisierung (Bauwesen)","Fassade","Stadtsanierung","Gebäudehülle","Gebäude"],"place":"Basel, Berlin, Boston ","_id":"5106","date_updated":"2023-03-15T13:49:57Z","user_id":"45673","type":"book","date_created":"2021-03-02T08:23:41Z","publication_identifier":{"isbn":["3-0356-1932-8 "]}},{"_id":"5108","language":[{"iso":"eng"}],"publication":"Journal of Cultural Heritage Management and Sustainable Development","date_created":"2021-03-02T08:26:54Z","type":"journal_article","intvolume":" 10","user_id":"45673","date_updated":"2023-03-15T13:49:57Z","issue":"1","year":2019,"author":[{"full_name":"Kousa, Christine","first_name":"Christine","last_name":"Kousa","id":"74063"},{"orcid":"0000-0002-8594-3168","full_name":"Pottgiesser, Uta","first_name":"Uta","id":"27166","last_name":"Pottgiesser"}],"department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"quality_controlled":"1","status":"public","page":"90-103","title":"Post Syrian-war material recovery, reuse and transformation in the Old City of Aleppo","citation":{"ieee":"C. Kousa and U. Pottgiesser, “Post Syrian-war material recovery, reuse and transformation in the Old City of Aleppo,” Journal of Cultural Heritage Management and Sustainable Development, vol. 10, no. 1, pp. 90–103, 2019.","apa":"Kousa, C., & Pottgiesser, U. (2019). Post Syrian-war material recovery, reuse and transformation in the Old City of Aleppo. Journal of Cultural Heritage Management and Sustainable Development, 10(1), 90–103.","chicago":"Kousa, Christine, and Uta Pottgiesser. “Post Syrian-War Material Recovery, Reuse and Transformation in the Old City of Aleppo.” Journal of Cultural Heritage Management and Sustainable Development 10, no. 1 (2019): 90–103.","ama":"Kousa C, Pottgiesser U. Post Syrian-war material recovery, reuse and transformation in the Old City of Aleppo. Journal of Cultural Heritage Management and Sustainable Development. 2019;10(1):90-103.","van":"Kousa C, Pottgiesser U. Post Syrian-war material recovery, reuse and transformation in the Old City of Aleppo. Journal of Cultural Heritage Management and Sustainable Development. 2019;10(1):90–103.","bjps":"Kousa C and Pottgiesser U (2019) Post Syrian-War Material Recovery, Reuse and Transformation in the Old City of Aleppo. Journal of Cultural Heritage Management and Sustainable Development 10, 90–103.","havard":"C. Kousa, U. Pottgiesser, Post Syrian-war material recovery, reuse and transformation in the Old City of Aleppo, Journal of Cultural Heritage Management and Sustainable Development. 10 (2019) 90–103.","mla":"Kousa, Christine, and Uta Pottgiesser. “Post Syrian-War Material Recovery, Reuse and Transformation in the Old City of Aleppo.” Journal of Cultural Heritage Management and Sustainable Development, vol. 10, no. 1, 2019, pp. 90–103.","ufg":"Kousa, Christine/Pottgiesser, Uta (2019): Post Syrian-war material recovery, reuse and transformation in the Old City of Aleppo, in: Journal of Cultural Heritage Management and Sustainable Development 10 (1), S. 90–103.","short":"C. Kousa, U. Pottgiesser, Journal of Cultural Heritage Management and Sustainable Development 10 (2019) 90–103.","din1505-2-1":"Kousa, Christine ; Pottgiesser, Uta: Post Syrian-war material recovery, reuse and transformation in the Old City of Aleppo. In: Journal of Cultural Heritage Management and Sustainable Development Bd. 10 (2019), Nr. 1, S. 90–103","chicago-de":"Kousa, Christine und Uta Pottgiesser. 2019. Post Syrian-war material recovery, reuse and transformation in the Old City of Aleppo. Journal of Cultural Heritage Management and Sustainable Development 10, Nr. 1: 90–103."},"volume":10,"publication_status":"published"},{"_id":"5110","place":"Basel, Berlin, Boston ","keyword":["Fassade","Glasbau","Modernisierung (Bauwesen)"],"language":[{"iso":"eng"}],"user_id":"45673","date_updated":"2023-03-15T13:49:57Z","publication_identifier":{"isbn":[" 3-0356-1934-4 "]},"type":"book","date_created":"2021-03-02T08:28:44Z","publisher":"Birkhäuser ","status":"public","page":"256","year":2019,"author":[{"last_name":"Ayón","first_name":"Angel ","full_name":"Ayón, Angel "},{"orcid":"0000-0002-8594-3168","id":"27166","last_name":"Pottgiesser","full_name":"Pottgiesser, Uta","first_name":"Uta"},{"last_name":"Richards","full_name":"Richards, Nathaniel ","first_name":"Nathaniel "}],"department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"citation":{"van":"Ayón A, Pottgiesser U, Richards N. Reglazing Modernism. Intervention Strategies for 20th-Century Icons . Basel, Berlin, Boston : Birkhäuser ; 2019. 256 p.","havard":"A. Ayón, U. Pottgiesser, N. Richards, Reglazing Modernism. Intervention Strategies for 20th-Century Icons , Birkhäuser , Basel, Berlin, Boston , 2019.","mla":"Ayón, Angel, et al. Reglazing Modernism. Intervention Strategies for 20th-Century Icons . Birkhäuser , 2019.","bjps":"Ayón A, Pottgiesser U and Richards N (2019) Reglazing Modernism. Intervention Strategies for 20th-Century Icons . Basel, Berlin, Boston : Birkhäuser .","ufg":"Ayón, Angel et. al. (2019): Reglazing Modernism. Intervention Strategies for 20th-Century Icons , Basel, Berlin, Boston .","apa":"Ayón, A., Pottgiesser, U., & Richards, N. (2019). Reglazing Modernism. Intervention Strategies for 20th-Century Icons . Basel, Berlin, Boston : Birkhäuser .","chicago":"Ayón, Angel , Uta Pottgiesser, and Nathaniel Richards. Reglazing Modernism. Intervention Strategies for 20th-Century Icons . Basel, Berlin, Boston : Birkhäuser , 2019.","short":"A. Ayón, U. Pottgiesser, N. Richards, Reglazing Modernism. Intervention Strategies for 20th-Century Icons , Birkhäuser , Basel, Berlin, Boston , 2019.","din1505-2-1":"Ayón, Angel ; Pottgiesser, Uta ; Richards, Nathaniel : Reglazing Modernism. Intervention Strategies for 20th-Century Icons . Basel, Berlin, Boston : Birkhäuser , 2019","chicago-de":"Ayón, Angel , Uta Pottgiesser und Nathaniel Richards. 2019. Reglazing Modernism. Intervention Strategies for 20th-Century Icons . Basel, Berlin, Boston : Birkhäuser .","ama":"Ayón A, Pottgiesser U, Richards N. Reglazing Modernism. Intervention Strategies for 20th-Century Icons . Basel, Berlin, Boston : Birkhäuser ; 2019.","ieee":"A. Ayón, U. Pottgiesser, and N. Richards, Reglazing Modernism. Intervention Strategies for 20th-Century Icons . Basel, Berlin, Boston : Birkhäuser , 2019."},"publication_status":"published","title":"Reglazing Modernism. Intervention Strategies for 20th-Century Icons "},{"oa":"1","language":[{"iso":"ger"}],"_id":"5359","type":"journal_editor","date_created":"2021-03-30T10:11:07Z","publication":"Stadt Land Quartier - Zwischen Realität und Zukunftsvisionen","publication_identifier":{"issn":["2566-8900"],"eissn":["2566-8919"]},"date_updated":"2023-03-15T13:49:59Z","user_id":"45673","editor":[{"last_name":"Hall","full_name":"Hall, Oliver","id":"27136","first_name":"Oliver"},{"orcid":"0000-0002-8841-9345","last_name":"Cardinali","full_name":"Cardinali, Marcel","id":"58462","first_name":"Marcel"},{"full_name":"Krick, Julia","first_name":"Julia","last_name":"Krick","id":"58606"}],"corporate_editor":["Technische Hochschule Ostwestfalen-Lippe","Forschungsschwerpunkt urbanLab"],"department":[{"_id":"DEP1303"},{"_id":"DEP1055"}],"main_file_link":[{"url":"https://www.yumpu.com/de/document/read/63241976/urbanlab-magazin-2019-stadtlandquartier","open_access":"1"}],"year":2019,"issue":"5","abstract":[{"text":"Seit 2016 erscheint das urbanLab Magazin jährlich als Fachzeitschrift für Stadt- und Regionalplanung mit dem Anspruch Forschung, Lehre und der Praxis in den Planungsdisziplinen des Spannungsfeldes Stadt und Quartier anhand konkreter Themencluster besser zu vernetzen. Wir geben zukunftsweisenden Ideen, Fachbeiträgen, Publikationen und kontroversen Diskussionen eine Plattform und bringen sie unterstützt durch Erkenntnisse aus unserer Forschung auf den Punkt. ","lang":"ger"}],"status":"public","title":"urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung","publication_status":"published","citation":{"chicago":"Hall, Oliver, Marcel Cardinali, Julia Krick, and Technische Hochschule Ostwestfalen-Lippe, eds. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. Stadt Land Quartier - Zwischen Realität und Zukunftsvisionen, 2019.","apa":"Hall, O., Cardinali, M., Krick, J., & Technische Hochschule Ostwestfalen-Lippe (Eds.). (2019). urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. Stadt Land Quartier - Zwischen Realität und Zukunftsvisionen.","ufg":"Hall, Oliver et. al. (Hgg.) (2019): urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung.","havard":"O. Hall, M. Cardinali, J. Krick, Technische Hochschule Ostwestfalen-Lippe, eds., urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, 2019.","bjps":"Hall O et al. (eds) (2019) urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. .","mla":"Hall, Oliver, et al., editors. “urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung.” Stadt Land Quartier - Zwischen Realität und Zukunftsvisionen, no. 5, 2019.","van":"Hall O, Cardinali M, Krick J, Technische Hochschule Ostwestfalen-Lippe, editors. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. Stadt Land Quartier - Zwischen Realität und Zukunftsvisionen. 2019.","chicago-de":"Hall, Oliver, Marcel Cardinali, Julia Krick und Technische Hochschule Ostwestfalen-Lippe, Hrsg. 2019. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. Stadt Land Quartier - Zwischen Realität und Zukunftsvisionen.","din1505-2-1":"Hall, O. ; Cardinali, M. ; Krick, J. ; Technische Hochschule Ostwestfalen-Lippe (Hrsg.): urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, 2019","short":"O. Hall, M. Cardinali, J. Krick, Technische Hochschule Ostwestfalen-Lippe, eds., urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, 2019.","ieee":"O. Hall, M. Cardinali, J. Krick, and Technische Hochschule Ostwestfalen-Lippe, Eds., urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, no. 5. 2019.","ama":"Hall O, Cardinali M, Krick J, Technische Hochschule Ostwestfalen-Lippe, eds. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung.; 2019."}},{"publication_status":"published","isi":"1","publisher":"Elsevier","quality_controlled":"1","department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"conference":{"end_date":"2018-06-21","start_date":"2018-06-17","location":"Guimaraes, PORTUGAL","name":"31st International Conference on Efficiency, Cost, Optimization, Simulation, and Environmental Impact of Energy Systems (ECOS)"},"abstract":[{"lang":"eng","text":"Towards renewable energy systems, the coupling of multiple sectors is important and incorporates novel technologies where currently no models exist that correctly represent all transient effects. Therefore, we present a method that incorporates Hardware-in-the-Loop simulations where virtual components as models are coupled to real and experimental facilities in real time. By including experimental components, a higher validity can be obtained and the practical applicability of renewable energy scenario can be discussed more profoundly. In this paper, the considered energy system consists of an experimental biocatalytic methanation reactor, a real photovoltaic park, a regenerative fuel cell and short-term storage units to supply a residential district. A representative control sequence of the methanator is obtained by modeling the scenario as an optimal control problem. A first HIL simulation highlights that modifications of the instrumentation are required for a grid injection of the generated methane. The scientific approach can be applied to any energy system where some of the considered components are available as experimental or real facilities. Non-exisiting components are simply replaced by models. The presented approach helps to determine which parts or process parameters are crucial for the planed operation before the overall energy system is realized on a larger scale. (C) 2019 Elsevier Ltd. All rights reserved."}],"user_id":"83781","intvolume":" 181","type":"journal_article","_id":"5435","doi":"10.1016/j.energy.2019.05.092","volume":181,"citation":{"ieee":"M. Griese, M. P. Hoffrath, T. Broeker, T. Schulte, and J. Schneider, “Hardware-in-the-Loop simulation of an optimized energy management incorporating an experimental biocatalytic methanation reactor,” Energy : the international journal, vol. 181, pp. 77–90, 2019, doi: 10.1016/j.energy.2019.05.092.","apa":"Griese, M., Hoffrath, M. P., Broeker, T., Schulte, T., & Schneider, J. (2019). Hardware-in-the-Loop simulation of an optimized energy management incorporating an experimental biocatalytic methanation reactor. Energy : The International Journal, 181, 77–90. https://doi.org/10.1016/j.energy.2019.05.092","chicago":"Griese, Martin, Marc Philippe Hoffrath, Timo Broeker, Thomas Schulte, and Jan Schneider. “Hardware-in-the-Loop Simulation of an Optimized Energy Management Incorporating an Experimental Biocatalytic Methanation Reactor.” Energy : The International Journal 181 (2019): 77–90. https://doi.org/10.1016/j.energy.2019.05.092.","ama":"Griese M, Hoffrath MP, Broeker T, Schulte T, Schneider J. Hardware-in-the-Loop simulation of an optimized energy management incorporating an experimental biocatalytic methanation reactor. Energy : the international journal. 2019;181:77-90. doi:10.1016/j.energy.2019.05.092","van":"Griese M, Hoffrath MP, Broeker T, Schulte T, Schneider J. Hardware-in-the-Loop simulation of an optimized energy management incorporating an experimental biocatalytic methanation reactor. Energy : the international journal. 2019;181:77–90.","bjps":"Griese M et al. (2019) Hardware-in-the-Loop Simulation of an Optimized Energy Management Incorporating an Experimental Biocatalytic Methanation Reactor. Energy : the international journal 181, 77–90.","havard":"M. Griese, M.P. Hoffrath, T. Broeker, T. Schulte, J. Schneider, Hardware-in-the-Loop simulation of an optimized energy management incorporating an experimental biocatalytic methanation reactor, Energy : The International Journal. 181 (2019) 77–90.","mla":"Griese, Martin, et al. “Hardware-in-the-Loop Simulation of an Optimized Energy Management Incorporating an Experimental Biocatalytic Methanation Reactor.” Energy : The International Journal, vol. 181, 2019, pp. 77–90, https://doi.org/10.1016/j.energy.2019.05.092.","ufg":"Griese, Martin u. a.: Hardware-in-the-Loop simulation of an optimized energy management incorporating an experimental biocatalytic methanation reactor, in: Energy : the international journal 181 (2019), S. 77–90.","short":"M. Griese, M.P. Hoffrath, T. Broeker, T. Schulte, J. Schneider, Energy : The International Journal 181 (2019) 77–90.","chicago-de":"Griese, Martin, Marc Philippe Hoffrath, Timo Broeker, Thomas Schulte und Jan Schneider. 2019. Hardware-in-the-Loop simulation of an optimized energy management incorporating an experimental biocatalytic methanation reactor. Energy : the international journal 181: 77–90. doi:10.1016/j.energy.2019.05.092, .","din1505-2-1":"Griese, Martin ; Hoffrath, Marc Philippe ; Broeker, Timo ; Schulte, Thomas ; Schneider, Jan: Hardware-in-the-Loop simulation of an optimized energy management incorporating an experimental biocatalytic methanation reactor. In: Energy : the international journal Bd. 181, Elsevier (2019), S. 77–90"},"title":"Hardware-in-the-Loop simulation of an optimized energy management incorporating an experimental biocatalytic methanation reactor","status":"public","page":"77 - 90","year":"2019","author":[{"last_name":"Griese","first_name":"Martin","full_name":"Griese, Martin","id":"52308"},{"full_name":"Hoffrath, Marc Philippe","last_name":"Hoffrath","first_name":"Marc Philippe"},{"first_name":"Timo","id":"43927","last_name":"Broeker","full_name":"Broeker, Timo"},{"last_name":"Schulte","first_name":"Thomas","full_name":"Schulte, Thomas","id":"46242"},{"id":"13209","last_name":"Schneider","full_name":"Schneider, Jan","first_name":"Jan","orcid":"0000-0001-6401-8873"}],"external_id":{"isi":["000476965900009"]},"date_updated":"2025-06-25T07:48:53Z","publication_identifier":{"issn":["0360-5442"],"eissn":["1873-6785"]},"publication":"Energy : the international journal","date_created":"2021-04-08T07:42:48Z","keyword":["Biological methanation","Energy management","HIL simulation","Optimization","Scalable models"],"language":[{"iso":"eng"}]},{"date_created":"2021-04-08T07:48:27Z","type":"conference_abstract","date_updated":"2024-04-15T07:38:30Z","user_id":"81304","_id":"5437","language":[{"iso":"ger"}],"title":"Cyberphysisches System zur thermischen Entkeimung von Getränken","citation":{"chicago-de":"Schwarzer, Knut, Linda Katsch, Imke Weishaupt und Jan Schneider. 2019. Cyberphysisches System zur thermischen Entkeimung von Getränken. In: .","din1505-2-1":"Schwarzer, Knut ; Katsch, Linda ; Weishaupt, Imke ; Schneider, Jan: Cyberphysisches System zur thermischen Entkeimung von Getränken. In: , 2019","short":"K. Schwarzer, L. Katsch, I. Weishaupt, J. Schneider, in: 2019.","ufg":"Schwarzer, Knut u. a.: Cyberphysisches System zur thermischen Entkeimung von Getränken, in: o. Hg.: o. O. 2019.","mla":"Schwarzer, Knut, et al. Cyberphysisches System zur thermischen Entkeimung von Getränken. 2019.","bjps":"Schwarzer K et al. (2019) Cyberphysisches System zur thermischen Entkeimung von Getränken.","havard":"K. Schwarzer, L. Katsch, I. Weishaupt, J. Schneider, Cyberphysisches System zur thermischen Entkeimung von Getränken, in: 2019.","van":"Schwarzer K, Katsch L, Weishaupt I, Schneider J. Cyberphysisches System zur thermischen Entkeimung von Getränken. In 2019.","ama":"Schwarzer K, Katsch L, Weishaupt I, Schneider J. Cyberphysisches System zur thermischen Entkeimung von Getränken. In: ; 2019.","chicago":"Schwarzer, Knut, Linda Katsch, Imke Weishaupt, and Jan Schneider. “Cyberphysisches System zur thermischen Entkeimung von Getränken,” 2019.","apa":"Schwarzer, K., Katsch, L., Weishaupt, I., & Schneider, J. (2019). Cyberphysisches System zur thermischen Entkeimung von Getränken. Food Safety Forum, München.","ieee":"K. Schwarzer, L. Katsch, I. Weishaupt, and J. Schneider, “Cyberphysisches System zur thermischen Entkeimung von Getränken,” presented at the Food Safety Forum, München, 2019."},"department":[{"_id":"DEP4023"},{"_id":"DEP4018"},{"_id":"DEP1308"}],"conference":{"name":"Food Safety Forum","location":"München","start_date":"2019-05-23","end_date":"2019-05-23"},"author":[{"first_name":"Knut","last_name":"Schwarzer","id":"13329","full_name":"Schwarzer, Knut"},{"orcid":"0000-0001-6628-3929 ","full_name":"Katsch, Linda","id":"71614","first_name":"Linda","last_name":"Katsch"},{"id":"58425","first_name":"Imke","last_name":"Weishaupt","full_name":"Weishaupt, Imke"},{"first_name":"Jan","full_name":"Schneider, Jan","id":"13209","last_name":"Schneider","orcid":"0000-0001-6401-8873"}],"year":"2019","status":"public"},{"date_created":"2021-04-08T08:44:40Z","type":"conference_abstract","date_updated":"2024-04-15T07:39:15Z","user_id":"81304","language":[{"iso":"eng"}],"_id":"5443","title":"Quality Control of Continuous Wort Production through Production Data Analysis in Latent Space","citation":{"ieee":"F. Zhang, K. Pinkal, F. Conradi, P. Wefing, J. Schneider, and O. Niggemann, “Quality Control of Continuous Wort Production through Production Data Analysis in Latent Space,” presented at the IEEE-ICIT Feb 2019, Melbourne, Australia, 2019.","ama":"Zhang F, Pinkal K, Conradi F, Wefing P, Schneider J, Niggemann O. Quality Control of Continuous Wort Production through Production Data Analysis in Latent Space. In: ; 2019.","apa":"Zhang, F., Pinkal, K., Conradi, F., Wefing, P., Schneider, J., & Niggemann, O. (2019). Quality Control of Continuous Wort Production through Production Data Analysis in Latent Space. IEEE-ICIT Feb 2019, Melbourne, Australia.","chicago":"Zhang, Fan, K. Pinkal, Florian Conradi, Patrick Wefing, Jan Schneider, and Oliver Niggemann. “Quality Control of Continuous Wort Production through Production Data Analysis in Latent Space,” 2019.","van":"Zhang F, Pinkal K, Conradi F, Wefing P, Schneider J, Niggemann O. Quality Control of Continuous Wort Production through Production Data Analysis in Latent Space. In 2019.","mla":"Zhang, Fan, et al. Quality Control of Continuous Wort Production through Production Data Analysis in Latent Space. 2019.","havard":"F. Zhang, K. Pinkal, F. Conradi, P. Wefing, J. Schneider, O. Niggemann, Quality Control of Continuous Wort Production through Production Data Analysis in Latent Space, in: 2019.","bjps":"Zhang F et al. (2019) Quality Control of Continuous Wort Production through Production Data Analysis in Latent Space.","ufg":"Zhang, Fan u. a.: Quality Control of Continuous Wort Production through Production Data Analysis in Latent Space, in: o. Hg.: o. O. 2019.","short":"F. Zhang, K. Pinkal, F. Conradi, P. Wefing, J. Schneider, O. Niggemann, in: 2019.","chicago-de":"Zhang, Fan, K. Pinkal, Florian Conradi, Patrick Wefing, Jan Schneider und Oliver Niggemann. 2019. Quality Control of Continuous Wort Production through Production Data Analysis in Latent Space. In: .","din1505-2-1":"Zhang, Fan ; Pinkal, K. ; Conradi, Florian ; Wefing, Patrick ; Schneider, Jan ; Niggemann, Oliver: Quality Control of Continuous Wort Production through Production Data Analysis in Latent Space. In: , 2019"},"department":[{"_id":"DEP4023"},{"_id":"DEP1308"}],"conference":{"location":"Melbourne, Australia","name":"IEEE-ICIT Feb 2019","end_date":"2019-02-15","start_date":"2019-02-13"},"year":"2019","author":[{"first_name":"Fan","last_name":"Zhang","full_name":"Zhang, Fan","id":"71479"},{"last_name":"Pinkal","first_name":"K.","full_name":"Pinkal, K."},{"id":"68967","first_name":"Florian","last_name":"Conradi","full_name":"Conradi, Florian"},{"first_name":"Patrick","full_name":"Wefing, Patrick","id":"68976","last_name":"Wefing"},{"first_name":"Jan","last_name":"Schneider","id":"13209","full_name":"Schneider, Jan","orcid":"0000-0001-6401-8873"},{"id":"10876","first_name":"Oliver","last_name":"Niggemann","full_name":"Niggemann, Oliver"}],"status":"public"},{"department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"author":[{"full_name":"Wittland, Sebastian","last_name":"Wittland","first_name":"Sebastian","id":"74203"},{"id":"61537","last_name":"Stake","first_name":"Kirsten","full_name":"Stake, Kirsten"},{"full_name":"Schattenberg, Britta","first_name":"Britta","last_name":"Schattenberg","id":"74227"},{"last_name":"Rohrbeck","full_name":"Rohrbeck, Hanna","id":"73948","first_name":"Hanna"},{"id":"42129","full_name":"Hermenau, Ute","last_name":"Hermenau","first_name":"Ute"},{"full_name":"Schneider, Jan","first_name":"Jan","last_name":"Schneider","id":"13209","orcid":"0000-0001-6401-8873"}],"year":"2019","main_file_link":[{"url":"https://www.bzfe.de/fileadmin/resources/eif/5984_2019_eif_04_x009.pdf","open_access":"1"}],"issue":"4","page":"262-267","status":"public","publisher":"Bundesanstalt für Landwirtschaft und Ernährung (BLE) ","title":"Neuartige Zucker - Kalorienreduktion in Lebensmitteln","publication_status":"published","citation":{"chicago":"Wittland, Sebastian, Kirsten Stake, Britta Schattenberg, Hanna Rohrbeck, Ute Hermenau, and Jan Schneider. “Neuartige Zucker - Kalorienreduktion in Lebensmitteln.” Ernährung im Fokus, no. 4 (2019): 262–67.","ieee":"S. Wittland, K. Stake, B. Schattenberg, H. Rohrbeck, U. Hermenau, and J. Schneider, “Neuartige Zucker - Kalorienreduktion in Lebensmitteln,” Ernährung im Fokus, no. 4, pp. 262–267, 2019.","apa":"Wittland, S., Stake, K., Schattenberg, B., Rohrbeck, H., Hermenau, U., & Schneider, J. (2019). Neuartige Zucker - Kalorienreduktion in Lebensmitteln. Ernährung im Fokus, 4, 262–267.","havard":"S. Wittland, K. Stake, B. Schattenberg, H. Rohrbeck, U. Hermenau, J. Schneider, Neuartige Zucker - Kalorienreduktion in Lebensmitteln, Ernährung im Fokus. (2019) 262–267.","bjps":"Wittland S et al. (2019) Neuartige Zucker - Kalorienreduktion in Lebensmitteln. Ernährung im Fokus 262–267.","mla":"Wittland, Sebastian, et al. “Neuartige Zucker - Kalorienreduktion in Lebensmitteln.” Ernährung im Fokus, no. 4, 2019, pp. 262–67.","ufg":"Wittland, Sebastian u. a.: Neuartige Zucker - Kalorienreduktion in Lebensmitteln, in: Ernährung im Fokus (2019), H. 4, S. 262–267.","ama":"Wittland S, Stake K, Schattenberg B, Rohrbeck H, Hermenau U, Schneider J. Neuartige Zucker - Kalorienreduktion in Lebensmitteln. Ernährung im Fokus. 2019;(4):262-267.","van":"Wittland S, Stake K, Schattenberg B, Rohrbeck H, Hermenau U, Schneider J. Neuartige Zucker - Kalorienreduktion in Lebensmitteln. Ernährung im Fokus. 2019;(4):262–7.","din1505-2-1":"Wittland, Sebastian ; Stake, Kirsten ; Schattenberg, Britta ; Rohrbeck, Hanna ; Hermenau, Ute ; Schneider, Jan: Neuartige Zucker - Kalorienreduktion in Lebensmitteln. In: Ernährung im Fokus, Bundesanstalt für Landwirtschaft und Ernährung (BLE) (2019), Nr. 4, S. 262–267","chicago-de":"Wittland, Sebastian, Kirsten Stake, Britta Schattenberg, Hanna Rohrbeck, Ute Hermenau und Jan Schneider. 2019. Neuartige Zucker - Kalorienreduktion in Lebensmitteln. Ernährung im Fokus, Nr. 4: 262–267.","short":"S. Wittland, K. Stake, B. Schattenberg, H. Rohrbeck, U. Hermenau, J. Schneider, Ernährung im Fokus (2019) 262–267."},"oa":"1","language":[{"iso":"ger"}],"_id":"5446","type":"journal_article","date_created":"2021-04-08T08:57:03Z","publication":"Ernährung im Fokus","publication_identifier":{"issn":["1617-4518"]},"date_updated":"2025-03-13T14:09:35Z","user_id":"13209"},{"status":"public","department":[{"_id":"DEP4023"}],"conference":{"name":"70. Bäckereitechnologie-Tagung","end_date":"2019-11-12","start_date":"2019-11-12"},"year":2019,"author":[{"full_name":"Rohrbeck, Hanna","last_name":"Rohrbeck","first_name":"Hanna","id":"73948"}],"citation":{"chicago":"Rohrbeck, Hanna. “Hat der Einsatz von Allulose in Milchbrötchen Auswirkungen auf die Gebäckqualität,” 2019.","apa":"Rohrbeck, H. (2019). Hat der Einsatz von Allulose in Milchbrötchen Auswirkungen auf die Gebäckqualität. Presented at the 70. Bäckereitechnologie-Tagung.","ieee":"H. Rohrbeck, “Hat der Einsatz von Allulose in Milchbrötchen Auswirkungen auf die Gebäckqualität,” presented at the 70. Bäckereitechnologie-Tagung, 2019.","ufg":"Rohrbeck, Hanna (2019): Hat der Einsatz von Allulose in Milchbrötchen Auswirkungen auf die Gebäckqualität, in: .","mla":"Rohrbeck, Hanna. Hat der Einsatz von Allulose in Milchbrötchen Auswirkungen auf die Gebäckqualität. 2019.","havard":"H. Rohrbeck, Hat der Einsatz von Allulose in Milchbrötchen Auswirkungen auf die Gebäckqualität, in: 2019.","bjps":"Rohrbeck H (2019) Hat der Einsatz von Allulose in Milchbrötchen Auswirkungen auf die Gebäckqualität.","van":"Rohrbeck H. Hat der Einsatz von Allulose in Milchbrötchen Auswirkungen auf die Gebäckqualität. In 2019.","ama":"Rohrbeck H. Hat der Einsatz von Allulose in Milchbrötchen Auswirkungen auf die Gebäckqualität. In: ; 2019.","chicago-de":"Rohrbeck, Hanna. 2019. Hat der Einsatz von Allulose in Milchbrötchen Auswirkungen auf die Gebäckqualität. In: .","din1505-2-1":"Rohrbeck, Hanna: Hat der Einsatz von Allulose in Milchbrötchen Auswirkungen auf die Gebäckqualität. In: , 2019","short":"H. Rohrbeck, in: 2019."},"title":"Hat der Einsatz von Allulose in Milchbrötchen Auswirkungen auf die Gebäckqualität","_id":"5447","language":[{"iso":"ger"}],"date_updated":"2023-03-15T13:49:59Z","user_id":"74004","date_created":"2021-04-08T08:58:57Z","type":"conference_abstract"},{"citation":{"ama":"Schneider J, Weishaupt I, Schwarzer K, Katsch L. Cyberphysisches System zur thermischen Entkeimung von Getränken. In: ; 2019.","ieee":"J. Schneider, I. Weishaupt, K. Schwarzer, and L. Katsch, “Cyberphysisches System zur thermischen Entkeimung von Getränken,” presented at the Food Safety Forum, München, 2019.","short":"J. Schneider, I. Weishaupt, K. Schwarzer, L. Katsch, in: 2019.","chicago-de":"Schneider, Jan, Imke Weishaupt, Knut Schwarzer und Linda Katsch. 2019. Cyberphysisches System zur thermischen Entkeimung von Getränken. In: .","din1505-2-1":"Schneider, Jan ; Weishaupt, Imke ; Schwarzer, Knut ; Katsch, Linda: Cyberphysisches System zur thermischen Entkeimung von Getränken. In: , 2019","van":"Schneider J, Weishaupt I, Schwarzer K, Katsch L. Cyberphysisches System zur thermischen Entkeimung von Getränken. In 2019.","mla":"Schneider, Jan, et al. Cyberphysisches System zur thermischen Entkeimung von Getränken. 2019.","bjps":"Schneider J et al. (2019) Cyberphysisches System zur thermischen Entkeimung von Getränken.","havard":"J. Schneider, I. Weishaupt, K. Schwarzer, L. Katsch, Cyberphysisches System zur thermischen Entkeimung von Getränken, in: 2019.","ufg":"Schneider, Jan u. a.: Cyberphysisches System zur thermischen Entkeimung von Getränken, in: o. Hg.: o. O. 2019.","apa":"Schneider, J., Weishaupt, I., Schwarzer, K., & Katsch, L. (2019). Cyberphysisches System zur thermischen Entkeimung von Getränken. Food Safety Forum, München.","chicago":"Schneider, Jan, Imke Weishaupt, Knut Schwarzer, and Linda Katsch. “Cyberphysisches System zur thermischen Entkeimung von Getränken,” 2019."},"title":"Cyberphysisches System zur thermischen Entkeimung von Getränken","status":"public","department":[{"_id":"DEP4023"},{"_id":"DEP4018"},{"_id":"DEP1308"}],"conference":{"location":"München","name":"Food Safety Forum","end_date":"2019-05-23","start_date":"2019-05-23"},"year":"2019","author":[{"first_name":"Jan","id":"13209","full_name":"Schneider, Jan","last_name":"Schneider","orcid":"0000-0001-6401-8873"},{"first_name":"Imke","last_name":"Weishaupt","full_name":"Weishaupt, Imke","id":"58425"},{"full_name":"Schwarzer, Knut","first_name":"Knut","id":"13329","last_name":"Schwarzer"},{"last_name":"Katsch","first_name":"Linda","id":"71614","full_name":"Katsch, Linda","orcid":"0000-0001-6628-3929 "}],"date_updated":"2024-04-15T07:47:20Z","user_id":"81304","type":"conference_abstract","date_created":"2021-04-08T09:59:47Z","language":[{"iso":"ger"}],"_id":"5465"},{"series_title":"Lebensmittelchemie","title":"Schonende Pasteurisation von Fruchtsäften: Nicht-Isotherme kinetische Untersuchung qualitätsbestimmender Inhaltsstoffe","volume":73,"citation":{"din1505-2-1":"Katsch, Linda ; Schneider, Jan: Schonende Pasteurisation von Fruchtsäften: Nicht-Isotherme kinetische Untersuchung qualitätsbestimmender Inhaltsstoffe, Lebensmittelchemie. Bd. 73, 2019","chicago-de":"Katsch, Linda und Jan Schneider. 2019. Schonende Pasteurisation von Fruchtsäften: Nicht-Isotherme kinetische Untersuchung qualitätsbestimmender Inhaltsstoffe. Bd. 73. Lebensmittelchemie. doi: https://doi.org/10.1002/lemi.201951127, .","short":"L. Katsch, J. Schneider, Schonende Pasteurisation von Fruchtsäften: Nicht-Isotherme Kinetische Untersuchung Qualitätsbestimmender Inhaltsstoffe, 2019.","bjps":"Katsch L and Schneider J (2019) Schonende Pasteurisation von Fruchtsäften: Nicht-Isotherme Kinetische Untersuchung Qualitätsbestimmender Inhaltsstoffe. .","havard":"L. Katsch, J. Schneider, Schonende Pasteurisation von Fruchtsäften: Nicht-Isotherme kinetische Untersuchung qualitätsbestimmender Inhaltsstoffe, 2019.","mla":"Katsch, Linda, and Jan Schneider. Schonende Pasteurisation von Fruchtsäften: Nicht-Isotherme Kinetische Untersuchung Qualitätsbestimmender Inhaltsstoffe. no. S1, 2019, https://doi.org/ https://doi.org/10.1002/lemi.201951127.","ufg":"Katsch, Linda/Schneider, Jan: Schonende Pasteurisation von Fruchtsäften: Nicht-Isotherme kinetische Untersuchung qualitätsbestimmender Inhaltsstoffe, Bd. 73, o. O. 2019 (Lebensmittelchemie).","ama":"Katsch L, Schneider J. Schonende Pasteurisation von Fruchtsäften: Nicht-Isotherme Kinetische Untersuchung Qualitätsbestimmender Inhaltsstoffe. Vol 73.; 2019. doi: https://doi.org/10.1002/lemi.201951127","van":"Katsch L, Schneider J. Schonende Pasteurisation von Fruchtsäften: Nicht-Isotherme kinetische Untersuchung qualitätsbestimmender Inhaltsstoffe. 2019. 127 p. (Lebensmittelchemie; vol. 73).","chicago":"Katsch, Linda, and Jan Schneider. Schonende Pasteurisation von Fruchtsäften: Nicht-Isotherme Kinetische Untersuchung Qualitätsbestimmender Inhaltsstoffe. Vol. 73. Lebensmittelchemie, 2019. https://doi.org/ https://doi.org/10.1002/lemi.201951127.","ieee":"L. Katsch and J. Schneider, Schonende Pasteurisation von Fruchtsäften: Nicht-Isotherme kinetische Untersuchung qualitätsbestimmender Inhaltsstoffe, vol. 73, no. S1. 2019. doi: https://doi.org/10.1002/lemi.201951127.","apa":"Katsch, L., & Schneider, J. (2019). Schonende Pasteurisation von Fruchtsäften: Nicht-Isotherme kinetische Untersuchung qualitätsbestimmender Inhaltsstoffe (Vol. 73, Issue S1). https://doi.org/ https://doi.org/10.1002/lemi.201951127"},"author":[{"orcid":"0000-0001-6628-3929 ","last_name":"Katsch","first_name":"Linda","full_name":"Katsch, Linda","id":"71614"},{"orcid":"0000-0001-6401-8873","first_name":"Jan","full_name":"Schneider, Jan","id":"13209","last_name":"Schneider"}],"year":"2019","department":[{"_id":"DEP4023"},{"_id":"DEP4018"},{"_id":"DEP1308"}],"conference":{"start_date":"2019-09-16","end_date":"2019-09-18","location":"Dresden","name":"48. Deutscher Lebensmittelchemikertag"},"issue":"S1","status":"public","page":"127","type":"conference_poster","date_created":"2021-04-08T10:21:29Z","user_id":"81304","date_updated":"2024-04-15T07:48:57Z","intvolume":" 73","language":[{"iso":"eng"}],"_id":"5470","doi":" https://doi.org/10.1002/lemi.201951127"},{"publisher":"IEEE","abstract":[{"lang":"eng","text":"The increasing amount of alarms and information for an operator in a modern plant becomes a significant safety risk. Although the notifications are a valuable support, they also lead to the curse of overloading with information for the operator. Due to the huge amount of alarms it is almost impossible to separate the crucial information from the insignificant ones. Therefore, new procedures are required to reduce these alarm floods and support the operator to minimize the safety risk. One approach is based on learning a causal model that represents the relationships between the alarms. This allows alarm sequences that are causally implied to be reduced to the root cause alarm. Fundamental element of this approach is the causal model. Therefore in this work, different probabilistic graphical models are considered and evaluated on the basis of appropriate criteria. A real use case of a bottle filling module serves as a benchmark for how well they are suitable as a causal model for the application in alarm flood reduction."}],"department":[{"_id":"DEP5023"}],"conference":{"name":"17th IEEE International Conference on Industrial Informatics (INDIN)","location":"Helsinki, Finland ","start_date":"2019-07-22","end_date":"2019-07-25"},"publication_status":"published","doi":"10.1109/indin41052.2019.8972251","_id":"12803","place":"[Piscataway, NJ]","user_id":"83781","type":"conference_editor_article","page":"1285-1290","status":"public","author":[{"id":"52317","first_name":"Paul","full_name":"Wunderlich, Paul","last_name":"Wunderlich"},{"full_name":"Hranisavljevic, Nemanja","last_name":"Hranisavljevic","first_name":"Nemanja","id":"62376"}],"year":"2019","citation":{"short":"P. Wunderlich, N. Hranisavljevic, Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction, IEEE, [Piscataway, NJ], 2019.","din1505-2-1":"Wunderlich, Paul ; Hranisavljevic, Nemanja ; Aalto University, Finland ; Tampere University, Finland ; Finnish Society of Automation, Finland (Hrsg.): Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction. [Piscataway, NJ] : IEEE, 2019","chicago-de":"Wunderlich, Paul und Nemanja Hranisavljevic. 2019. Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction. Hg. von Aalto University, Finland, Tampere University, Finland, und Finnish Society of Automation, Finland. 2019 IEEE 17th International Conference on Industrial Informatics (INDIN). [Piscataway, NJ]: IEEE. doi:10.1109/indin41052.2019.8972251, .","van":"Wunderlich P, Hranisavljevic N. Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction. Aalto University, Finland, Tampere University, Finland, Finnish Society of Automation, Finland, editors. 2019 IEEE 17th International Conference on Industrial Informatics (INDIN). [Piscataway, NJ]: IEEE; 2019.","mla":"Wunderlich, Paul, and Nemanja Hranisavljevic. “Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction.” 2019 IEEE 17th International Conference on Industrial Informatics (INDIN), edited by Aalto University, Finland et al., IEEE, 2019, pp. 1285–90, https://doi.org/10.1109/indin41052.2019.8972251.","havard":"P. Wunderlich, N. Hranisavljevic, Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction, IEEE, [Piscataway, NJ], 2019.","bjps":"Wunderlich P and Hranisavljevic N (2019) Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction, Aalto University, Finland, Tampere University, Finland, and Finnish Society of Automation, Finland (eds). [Piscataway, NJ]: IEEE.","ufg":"Wunderlich, Paul/Hranisavljevic, Nemanja: Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction, hg. von Aalto University, Finland/Tampere University, Finland, Finnish Society of Automation, Finland, [Piscataway, NJ] 2019.","apa":"Wunderlich, P., & Hranisavljevic, N. (2019). Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction. In Aalto University, Finland, Tampere University, Finland, & Finnish Society of Automation, Finland (Eds.), 2019 IEEE 17th International Conference on Industrial Informatics (INDIN) (pp. 1285–1290). IEEE. https://doi.org/10.1109/indin41052.2019.8972251","chicago":"Wunderlich, Paul, and Nemanja Hranisavljevic. Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction. Edited by Aalto University, Finland, Tampere University, Finland, and Finnish Society of Automation, Finland. 2019 IEEE 17th International Conference on Industrial Informatics (INDIN). [Piscataway, NJ]: IEEE, 2019. https://doi.org/10.1109/indin41052.2019.8972251.","ama":"Wunderlich P, Hranisavljevic N. Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction. (Aalto University, Finland, Tampere University, Finland, Finnish Society of Automation, Finland, eds.). IEEE; 2019:1285-1290. doi:10.1109/indin41052.2019.8972251","ieee":"P. Wunderlich and N. Hranisavljevic, Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction. [Piscataway, NJ]: IEEE, 2019, pp. 1285–1290. doi: 10.1109/indin41052.2019.8972251."},"title":"Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction","language":[{"iso":"eng"}],"keyword":["probabilistic graphical model","causal model","alarm flood reduction","Bayesian network","Markov chain","restricted boltzmann machine","automata"],"corporate_editor":["Aalto University, Finland","Tampere University, Finland","Finnish Society of Automation, Finland"],"date_updated":"2025-06-26T13:38:06Z","date_created":"2025-04-16T06:29:04Z","publication":"2019 IEEE 17th International Conference on Industrial Informatics (INDIN)","publication_identifier":{"isbn":["978-1-7281-2928-0"],"eisbn":["978-1-7281-2927-3"]}},{"external_id":{"isi":["000506715100040"]},"author":[{"first_name":"Peng","full_name":"Li, Peng","id":"58937","last_name":"Li"},{"first_name":"Oliver","full_name":"Niggemann, Oliver","id":"10876","last_name":"Niggemann"}],"year":"2019","status":"public","title":"Non-convex hull based anomaly detection in CPPS","volume":87,"citation":{"ama":"Li P, Niggemann O. Non-convex hull based anomaly detection in CPPS. Engineering Applications of Artificial Intelligence. 2019;87. doi:10.1016/j.engappai.2019.103301","van":"Li P, Niggemann O. Non-convex hull based anomaly detection in CPPS. Engineering Applications of Artificial Intelligence. 2019;87.","havard":"P. Li, O. Niggemann, Non-convex hull based anomaly detection in CPPS, Engineering Applications of Artificial Intelligence. 87 (2019).","mla":"Li, Peng, and Oliver Niggemann. “Non-Convex Hull Based Anomaly Detection in CPPS.” Engineering Applications of Artificial Intelligence, vol. 87, 103301, 2019, https://doi.org/10.1016/j.engappai.2019.103301.","bjps":"Li P and Niggemann O (2019) Non-Convex Hull Based Anomaly Detection in CPPS. Engineering Applications of Artificial Intelligence 87.","ufg":"Li, Peng/Niggemann, Oliver: Non-convex hull based anomaly detection in CPPS, in: Engineering Applications of Artificial Intelligence 87 (2019).","ieee":"P. Li and O. Niggemann, “Non-convex hull based anomaly detection in CPPS,” Engineering Applications of Artificial Intelligence, vol. 87, Art. no. 103301, 2019, doi: 10.1016/j.engappai.2019.103301.","apa":"Li, P., & Niggemann, O. (2019). Non-convex hull based anomaly detection in CPPS. Engineering Applications of Artificial Intelligence, 87, Article 103301. https://doi.org/10.1016/j.engappai.2019.103301","chicago":"Li, Peng, and Oliver Niggemann. “Non-Convex Hull Based Anomaly Detection in CPPS.” Engineering Applications of Artificial Intelligence 87 (2019). https://doi.org/10.1016/j.engappai.2019.103301.","short":"P. Li, O. Niggemann, Engineering Applications of Artificial Intelligence 87 (2019).","din1505-2-1":"Li, Peng ; Niggemann, Oliver: Non-convex hull based anomaly detection in CPPS. In: Engineering Applications of Artificial Intelligence Bd. 87. Amsterdam [u.a.], Elsevier BV (2019)","chicago-de":"Li, Peng und Oliver Niggemann. 2019. Non-convex hull based anomaly detection in CPPS. Engineering Applications of Artificial Intelligence 87. doi:10.1016/j.engappai.2019.103301, ."},"keyword":["One-class classification","n-dimensional oriented non-convex hull","Anomaly detection","CPPS"],"language":[{"iso":"eng"}],"publication":"Engineering Applications of Artificial Intelligence","publication_identifier":{"eissn":["1873-6769"],"issn":["0952-1976"]},"date_created":"2025-04-16T09:51:12Z","date_updated":"2025-06-26T13:34:10Z","abstract":[{"text":"Along with the constantly increasing complexity of industrial automation systems, machine learning methods have been widely applied to detecting abnormal states in such systems. Anomaly detection tasks can be treated as one-class classification problems in machine learning. Geometric methods can give an intuitive solution to such problems. In this paper, we propose a new geometric structure, oriented non-convex hulls, to represent decision boundaries used for one-class classification. Based on this geometric structure, a novel boundary based one-class classification algorithm is developed to solve the anomaly detection problem. Compared with traditional boundary-based approaches such as convex hulls based methods and one-class support vector machines, the proposed approach can better reflect the true geometry of target data and needs little effort for parameter tuning. The effectiveness of this approach is evaluated with artificial and real world data sets to solve the anomaly detection problem in Cyber-Physical-Production-Systems (CPPS). The evaluation results also show that the proposed approach has higher generality than the used baseline algorithms.","lang":"eng"}],"department":[{"_id":"DEP5023"}],"publisher":"Elsevier BV","isi":"1","publication_status":"published","_id":"12808","article_number":"103301","doi":"10.1016/j.engappai.2019.103301","place":"Amsterdam [u.a.]","type":"scientific_journal_article","intvolume":" 87","user_id":"83781"},{"place":"[Piscataway, NJ]","doi":"10.1109/etfa.2019.8869473","_id":"12826","user_id":"83781","type":"conference_editor_article","publisher":"IEEE","conference":{"name":"24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)","location":"Zaragoza, SPAIN","end_date":"201-09-13","start_date":"2019-09-10"},"department":[{"_id":"DEP5023"}],"abstract":[{"lang":"eng","text":"The configuration of current automated production systems is complex and therefore time consuming while the market demands an easy setup and adaptability due to smaller batch sizes and volatile markets. While there are different concepts in research on how to simplify the engineering process by using generic skills or capabilities of devices, run-time control is still achieved with proprietary communication protocols and commands. The concept in this paper uses skills not only in the phase of engineering but also consequently for direct and generic control of field-devices. An executable skill-metamodel therefore describes the methodological functionality which is implemented by using OPC UA due to its vendor independence as well as built-in services and information model. The implementation uses client/server-based OPC UA and the pub/sub pattern to prepare for a deterministic real-time control in conjunction with TSN, which is required by industrial automation."}],"publication_status":"published","series_title":"IEEE International Conference on Emerging Technologies and Factory Automation-ETFA","language":[{"iso":"eng"}],"keyword":["OPC UA","Skills","Capabilities","Engineering","Field-Device","Interoperability","Control"],"date_updated":"2025-06-26T13:27:46Z","corporate_editor":["IEEE International Conference on Emerging Technologies and Factory Automation ","Institute of Electrical and Electronics Engineers","Universidad de Zaragoza ","IEEE Industrial Electronics Society "],"date_created":"2025-04-22T13:52:53Z","publication":"24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)","publication_identifier":{"issn":["1946-0740"],"eisbn":["978-1-7281-0302-0"],"isbn":["978-1-7281-0303-7"],"eissn":["1946-0759"]},"page":"1101-1108","status":"public","year":"2019","author":[{"last_name":"Zimmermann","full_name":"Zimmermann, Patrick","first_name":"Patrick"},{"last_name":"Axmann","first_name":"Etienne","full_name":"Axmann, Etienne"},{"first_name":"Benjamin","full_name":"Brandenbourger, Benjamin","last_name":"Brandenbourger"},{"first_name":"Kirill","full_name":"Dorofeev, Kirill","last_name":"Dorofeev"},{"id":"51482","full_name":"Mankowski, Andre","first_name":"Andre","last_name":"Mankowski"},{"first_name":"Paulo","last_name":"Zanini","full_name":"Zanini, Paulo"}],"citation":{"ieee":"P. Zimmermann, E. Axmann, B. Brandenbourger, K. Dorofeev, A. Mankowski, and P. Zanini, Skill-based Engineering and Control on Field-Device-Level with OPC UA. [Piscataway, NJ]: IEEE, 2019, pp. 1101–1108. doi: 10.1109/etfa.2019.8869473.","ama":"Zimmermann P, Axmann E, Brandenbourger B, Dorofeev K, Mankowski A, Zanini P. Skill-Based Engineering and Control on Field-Device-Level with OPC UA. (IEEE International Conference on Emerging Technologies and Factory Automation , Institute of Electrical and Electronics Engineers, Universidad de Zaragoza , IEEE Industrial Electronics Society , eds.). IEEE; 2019:1101-1108. doi:10.1109/etfa.2019.8869473","short":"P. Zimmermann, E. Axmann, B. Brandenbourger, K. Dorofeev, A. Mankowski, P. Zanini, Skill-Based Engineering and Control on Field-Device-Level with OPC UA, IEEE, [Piscataway, NJ], 2019.","din1505-2-1":"Zimmermann, Patrick ; Axmann, Etienne ; Brandenbourger, Benjamin ; Dorofeev, Kirill ; Mankowski, Andre ; Zanini, Paulo ; IEEE International Conference on Emerging Technologies and Factory Automation ; Institute of Electrical and Electronics Engineers ; Universidad de Zaragoza ; IEEE Industrial Electronics Society (Hrsg.): Skill-based Engineering and Control on Field-Device-Level with OPC UA, IEEE International Conference on Emerging Technologies and Factory Automation-ETFA. [Piscataway, NJ] : IEEE, 2019","chicago-de":"Zimmermann, Patrick, Etienne Axmann, Benjamin Brandenbourger, Kirill Dorofeev, Andre Mankowski und Paulo Zanini. 2019. Skill-based Engineering and Control on Field-Device-Level with OPC UA. Hg. von IEEE International Conference on Emerging Technologies and Factory Automation , Institute of Electrical and Electronics Engineers, Universidad de Zaragoza , und IEEE Industrial Electronics Society . 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). IEEE International Conference on Emerging Technologies and Factory Automation-ETFA. [Piscataway, NJ]: IEEE. doi:10.1109/etfa.2019.8869473, .","apa":"Zimmermann, P., Axmann, E., Brandenbourger, B., Dorofeev, K., Mankowski, A., & Zanini, P. (2019). Skill-based Engineering and Control on Field-Device-Level with OPC UA. In IEEE International Conference on Emerging Technologies and Factory Automation , Institute of Electrical and Electronics Engineers, Universidad de Zaragoza , & IEEE Industrial Electronics Society (Eds.), 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) (pp. 1101–1108). IEEE. https://doi.org/10.1109/etfa.2019.8869473","chicago":"Zimmermann, Patrick, Etienne Axmann, Benjamin Brandenbourger, Kirill Dorofeev, Andre Mankowski, and Paulo Zanini. Skill-Based Engineering and Control on Field-Device-Level with OPC UA. Edited by IEEE International Conference on Emerging Technologies and Factory Automation , Institute of Electrical and Electronics Engineers, Universidad de Zaragoza , and IEEE Industrial Electronics Society . 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). IEEE International Conference on Emerging Technologies and Factory Automation-ETFA. [Piscataway, NJ]: IEEE, 2019. https://doi.org/10.1109/etfa.2019.8869473.","van":"Zimmermann P, Axmann E, Brandenbourger B, Dorofeev K, Mankowski A, Zanini P. Skill-based Engineering and Control on Field-Device-Level with OPC UA. IEEE International Conference on Emerging Technologies and Factory Automation , Institute of Electrical and Electronics Engineers, Universidad de Zaragoza , IEEE Industrial Electronics Society , editors. 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). [Piscataway, NJ]: IEEE; 2019. (IEEE International Conference on Emerging Technologies and Factory Automation-ETFA).","ufg":"Zimmermann, Patrick u. a.: Skill-based Engineering and Control on Field-Device-Level with OPC UA, hg. von IEEE International Conference on Emerging Technologies and Factory Automation u. a., [Piscataway, NJ] 2019 (IEEE International Conference on Emerging Technologies and Factory Automation-ETFA).","bjps":"Zimmermann P et al. (2019) Skill-Based Engineering and Control on Field-Device-Level with OPC UA, IEEE International Conference on Emerging Technologies and Factory Automation et al. (eds). [Piscataway, NJ]: IEEE.","havard":"P. Zimmermann, E. Axmann, B. Brandenbourger, K. Dorofeev, A. Mankowski, P. Zanini, Skill-based Engineering and Control on Field-Device-Level with OPC UA, IEEE, [Piscataway, NJ], 2019.","mla":"Zimmermann, Patrick, et al. “Skill-Based Engineering and Control on Field-Device-Level with OPC UA.” 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), edited by IEEE International Conference on Emerging Technologies and Factory Automation et al., IEEE, 2019, pp. 1101–08, https://doi.org/10.1109/etfa.2019.8869473."},"title":"Skill-based Engineering and Control on Field-Device-Level with OPC UA"},{"keyword":["Heterogeneous networks","Real-time systems","Bandwidth","Job shop scheduling","Smart manufacturing","Computer architecture","Cross-network fusion","heterogeneous networks","network resource"],"language":[{"iso":"eng"}],"date_updated":"2025-06-26T13:26:20Z","publication":"IEEE Transactions on Industrial Informatics","publication_identifier":{"eissn":["1941-0050"],"issn":["1551-3203"]},"date_created":"2025-04-23T08:35:16Z","status":"public","page":"6059-6068","external_id":{"isi":["000542966300043"]},"author":[{"first_name":"Jiafu","last_name":"Wan","full_name":"Wan, Jiafu"},{"full_name":"Yang, Jun","first_name":"Jun","last_name":"Yang"},{"last_name":"Wang","first_name":"Shiyong","full_name":"Wang, Shiyong"},{"last_name":"Li","first_name":"Di","full_name":"Li, Di"},{"id":"58937","full_name":"Li, Peng","last_name":"Li","first_name":"Peng"},{"full_name":"Xia, Min","first_name":"Min","last_name":"Xia"}],"year":"2019","volume":16,"citation":{"ama":"Wan J, Yang J, Wang S, Li D, Li P, Xia M. Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory. IEEE Transactions on Industrial Informatics. 2019;16(9):6059-6068. doi:10.1109/tii.2019.2952669","ieee":"J. Wan, J. Yang, S. Wang, D. Li, P. Li, and M. Xia, “Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory,” IEEE Transactions on Industrial Informatics, vol. 16, no. 9, pp. 6059–6068, 2019, doi: 10.1109/tii.2019.2952669.","van":"Wan J, Yang J, Wang S, Li D, Li P, Xia M. Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory. IEEE Transactions on Industrial Informatics. 2019;16(9):6059–68.","havard":"J. Wan, J. Yang, S. Wang, D. Li, P. Li, M. Xia, Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory, IEEE Transactions on Industrial Informatics. 16 (2019) 6059–6068.","bjps":"Wan J et al. (2019) Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory. IEEE Transactions on Industrial Informatics 16, 6059–6068.","mla":"Wan, Jiafu, et al. “Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory.” IEEE Transactions on Industrial Informatics, vol. 16, no. 9, 2019, pp. 6059–68, https://doi.org/10.1109/tii.2019.2952669.","ufg":"Wan, Jiafu u. a.: Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory, in: IEEE Transactions on Industrial Informatics 16 (2019), H. 9, S. 6059–6068.","apa":"Wan, J., Yang, J., Wang, S., Li, D., Li, P., & Xia, M. (2019). Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory. IEEE Transactions on Industrial Informatics, 16(9), 6059–6068. https://doi.org/10.1109/tii.2019.2952669","chicago":"Wan, Jiafu, Jun Yang, Shiyong Wang, Di Li, Peng Li, and Min Xia. “Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory.” IEEE Transactions on Industrial Informatics 16, no. 9 (2019): 6059–68. https://doi.org/10.1109/tii.2019.2952669.","short":"J. Wan, J. Yang, S. Wang, D. Li, P. Li, M. Xia, IEEE Transactions on Industrial Informatics 16 (2019) 6059–6068.","chicago-de":"Wan, Jiafu, Jun Yang, Shiyong Wang, Di Li, Peng Li und Min Xia. 2019. Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory. IEEE Transactions on Industrial Informatics 16, Nr. 9: 6059–6068. doi:10.1109/tii.2019.2952669, .","din1505-2-1":"Wan, Jiafu ; Yang, Jun ; Wang, Shiyong ; Li, Di ; Li, Peng ; Xia, Min: Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory. In: IEEE Transactions on Industrial Informatics Bd. 16. New York, NY, Institute of Electrical and Electronics Engineers (IEEE) (2019), Nr. 9, S. 6059–6068"},"title":"Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory","_id":"12834","doi":"10.1109/tii.2019.2952669","place":"New York, NY","intvolume":" 16","user_id":"83781","type":"scientific_journal_article","publisher":"Institute of Electrical and Electronics Engineers (IEEE)","issue":"9","abstract":[{"text":"In the context of Industry 4.0, extensive deployment and application of advanced manufacturing equipment and various sensors is leading to a growing demand for data exchange between different devices. In smart factories, network transmission has multiprotocol features of wired/wireless communication, and different data flows have different real-time requirements. In this article, a heterogeneous network architecture based on software-defined network is proposed for realizing cross-network flexible forwarding of multisource manufacturing data and optimized utilization of network resources. Subsequently, the mechanism of cross-network fusion and scheduling (CNFS) is analyzed from the perspective of high dynamic characteristics and different delay requirements of data flows. Based on this analysis, a route-aware data flow dynamic reconstruction algorithm is proposed. The proposed algorithm improves the efficiency of manufacturing data cross-network fusion, especially for multivariety and small-batch intelligent manufacturing systems. Furthermore, for meeting the bandwidth requirements of different delay flows, a delay-sensitive network bandwidth scheduling algorithm is proposed. Finally, the effectiveness of the proposed CNFS mechanism is verified using a candy packaging intelligent production line prototype platform.","lang":"eng"}],"department":[{"_id":"DEP5023"}],"publication_status":"published","isi":"1"},{"language":[{"iso":"ger"}],"publication":"Automation 2018 : 19. Leitkongress der Mess- und Automatisierungstechnik : Baden-Baden, 03. und 04. Juli 2018","publication_identifier":{"isbn":["978-3-18-092330-7"],"issn":[" 0083-5560"]},"date_created":"2024-03-07T13:43:15Z","date_updated":"2024-04-19T12:55:09Z","year":"2018","author":[{"id":"82849","last_name":"Schneider","first_name":"Daniel","full_name":"Schneider, Daniel"},{"first_name":"Harry","last_name":"Fast","full_name":"Fast, Harry","id":"51413"},{"full_name":"Flatt, Holger","last_name":"Flatt","id":"58494","first_name":"Holger"},{"first_name":"Jürgen","last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen"},{"orcid":"https://orcid.org/0000-0001-7293-6893","last_name":"Stübbe","full_name":"Stübbe, Oliver","first_name":"Oliver","id":"51864"},{"last_name":"Heidl","first_name":"René","full_name":"Heidl, René"}],"status":"public","page":"273-284","title":"Einsatzfähigkeit von optischer Freiraumkommunikation in industriellen Produktionsumgebungen","citation":{"ama":"Schneider D, Fast H, Flatt H, Jasperneite J, Stübbe O, Heidl R. Einsatzfähigkeit von optischer Freiraumkommunikation in industriellen Produktionsumgebungen. Vol 2330. VDI Verlag; 2018:273-284. doi:10.51202/9783181023303-273","ieee":"D. Schneider, H. Fast, H. Flatt, J. Jasperneite, O. Stübbe, and R. Heidl, Einsatzfähigkeit von optischer Freiraumkommunikation in industriellen Produktionsumgebungen, vol. 2330. Düsseldorf: VDI Verlag, 2018, pp. 273–284. doi: 10.51202/9783181023303-273.","chicago-de":"Schneider, Daniel, Harry Fast, Holger Flatt, Jürgen Jasperneite, Oliver Stübbe und René Heidl. 2018. Einsatzfähigkeit von optischer Freiraumkommunikation in industriellen Produktionsumgebungen. Automation 2018 : 19. Leitkongress der Mess- und Automatisierungstechnik : Baden-Baden, 03. und 04. Juli 2018. Bd. 2330. VDI-Berichte. Düsseldorf: VDI Verlag. doi:10.51202/9783181023303-273, .","din1505-2-1":"Schneider, Daniel ; Fast, Harry ; Flatt, Holger ; Jasperneite, Jürgen ; Stübbe, Oliver ; Heidl, René: Einsatzfähigkeit von optischer Freiraumkommunikation in industriellen Produktionsumgebungen, VDI-Berichte. Bd. 2330. Düsseldorf : VDI Verlag, 2018","short":"D. Schneider, H. Fast, H. Flatt, J. Jasperneite, O. Stübbe, R. Heidl, Einsatzfähigkeit von optischer Freiraumkommunikation in industriellen Produktionsumgebungen, VDI Verlag, Düsseldorf, 2018.","mla":"Schneider, Daniel, et al. “Einsatzfähigkeit von optischer Freiraumkommunikation in industriellen Produktionsumgebungen.” Automation 2018 : 19. Leitkongress der Mess- und Automatisierungstechnik : Baden-Baden, 03. und 04. Juli 2018, vol. 2330, VDI Verlag, 2018, pp. 273–84, https://doi.org/10.51202/9783181023303-273.","havard":"D. Schneider, H. Fast, H. Flatt, J. Jasperneite, O. Stübbe, R. Heidl, Einsatzfähigkeit von optischer Freiraumkommunikation in industriellen Produktionsumgebungen, VDI Verlag, Düsseldorf, 2018.","bjps":"Schneider D et al. (2018) Einsatzfähigkeit von optischer Freiraumkommunikation in industriellen Produktionsumgebungen. Düsseldorf: VDI Verlag.","ufg":"Schneider, Daniel u. a.: Einsatzfähigkeit von optischer Freiraumkommunikation in industriellen Produktionsumgebungen, Bd. 2330, Düsseldorf 2018 (VDI-Berichte).","van":"Schneider D, Fast H, Flatt H, Jasperneite J, Stübbe O, Heidl R. Einsatzfähigkeit von optischer Freiraumkommunikation in industriellen Produktionsumgebungen. Automation 2018 : 19. Leitkongress der Mess- und Automatisierungstechnik : Baden-Baden, 03. und 04. Juli 2018. Düsseldorf: VDI Verlag; 2018. (VDI-Berichte; vol. 2330).","chicago":"Schneider, Daniel, Harry Fast, Holger Flatt, Jürgen Jasperneite, Oliver Stübbe, and René Heidl. Einsatzfähigkeit von optischer Freiraumkommunikation in industriellen Produktionsumgebungen. Automation 2018 : 19. Leitkongress der Mess- und Automatisierungstechnik : Baden-Baden, 03. und 04. Juli 2018. Vol. 2330. VDI-Berichte. Düsseldorf: VDI Verlag, 2018. https://doi.org/10.51202/9783181023303-273.","apa":"Schneider, D., Fast, H., Flatt, H., Jasperneite, J., Stübbe, O., & Heidl, R. (2018). Einsatzfähigkeit von optischer Freiraumkommunikation in industriellen Produktionsumgebungen. In Automation 2018 : 19. Leitkongress der Mess- und Automatisierungstechnik : Baden-Baden, 03. und 04. Juli 2018 (Vol. 2330, pp. 273–284). VDI Verlag. https://doi.org/10.51202/9783181023303-273"},"volume":2330,"place":"Düsseldorf","_id":"11195","doi":"10.51202/9783181023303-273","type":"conference_editor_article","user_id":"51864","intvolume":" 2330","conference":{"name":"19. Leitkongress der Mess- und Automatisierungstechnik Seamless Convergence of Automation & IT","location":"Baden-Baden","start_date":"2018-07-03","end_date":"2018-07-04"},"department":[{"_id":"DEP5020"},{"_id":"DEP5019"},{"_id":"DEP5000"},{"_id":"DEP6020"}],"publisher":"VDI Verlag","series_title":"VDI-Berichte","publication_status":"published"},{"language":[{"iso":"eng"}],"oa":"1","date_updated":"2023-03-15T13:49:38Z","publication_identifier":{"unknown":["978-3-7315-0845-8"]},"publication":"28. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA)","date_created":"2019-11-25T08:35:43Z","status":"public","page":"279 - 295","year":2018,"main_file_link":[{"open_access":"1","url":"https://pdfs.semanticscholar.org/33a3/7f9f338cb00496c64eb19a66d954d486c4d5.pdf#page=291"}],"author":[{"first_name":"Anton","id":"52097","full_name":"Pfeifer, Anton","last_name":"Pfeifer"},{"orcid":"0000-0002-3325-7887","id":"1804","last_name":"Lohweg","full_name":"Lohweg, Volker","first_name":"Volker"}],"citation":{"apa":"Pfeifer, A., & Lohweg, V. (2018). Identifying Characteristic Gait Patterns in Real-World Scenarios. In 28. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA) (pp. 279–295). Dortmund: KIT Scientific Publishing, Karlsruhe. https://doi.org/10.5445/KSP/1000085935","chicago":"Pfeifer, Anton, and Volker Lohweg. “Identifying Characteristic Gait Patterns in Real-World Scenarios.” In 28. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- Und Automatisierungstechnik (GMA), 279–95. Dortmund: KIT Scientific Publishing, Karlsruhe, 2018. https://doi.org/10.5445/KSP/1000085935.","van":"Pfeifer A, Lohweg V. Identifying Characteristic Gait Patterns in Real-World Scenarios. In: 28 Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA). Dortmund: KIT Scientific Publishing, Karlsruhe; 2018. p. 279–95.","ufg":"Pfeifer, Anton/Lohweg, Volker (2018): Identifying Characteristic Gait Patterns in Real-World Scenarios, in: 28. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), Dortmund, S. 279–295.","havard":"A. Pfeifer, V. Lohweg, Identifying Characteristic Gait Patterns in Real-World Scenarios, in: 28. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- Und Automatisierungstechnik (GMA), KIT Scientific Publishing, Karlsruhe, Dortmund, 2018: pp. 279–295.","bjps":"Pfeifer A and Lohweg V (2018) Identifying Characteristic Gait Patterns in Real-World Scenarios. 28. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- Und Automatisierungstechnik (GMA). Dortmund: KIT Scientific Publishing, Karlsruhe, pp. 279–295.","mla":"Pfeifer, Anton, and Volker Lohweg. “Identifying Characteristic Gait Patterns in Real-World Scenarios.” 28. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- Und Automatisierungstechnik (GMA), KIT Scientific Publishing, Karlsruhe, 2018, pp. 279–95, doi:10.5445/KSP/1000085935.","short":"A. Pfeifer, V. Lohweg, in: 28. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- Und Automatisierungstechnik (GMA), KIT Scientific Publishing, Karlsruhe, Dortmund, 2018, pp. 279–295.","din1505-2-1":"Pfeifer, Anton ; Lohweg, Volker: Identifying Characteristic Gait Patterns in Real-World Scenarios. In: 28. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA). Dortmund : KIT Scientific Publishing, Karlsruhe, 2018, S. 279–295","chicago-de":"Pfeifer, Anton und Volker Lohweg. 2018. Identifying Characteristic Gait Patterns in Real-World Scenarios. In: 28. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 279–295. Dortmund: KIT Scientific Publishing, Karlsruhe. doi:10.5445/KSP/1000085935, .","ieee":"A. Pfeifer and V. Lohweg, “Identifying Characteristic Gait Patterns in Real-World Scenarios,” in 28. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), Dortmund, 2018, pp. 279–295.","ama":"Pfeifer A, Lohweg V. Identifying Characteristic Gait Patterns in Real-World Scenarios. In: 28. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- Und Automatisierungstechnik (GMA). Dortmund: KIT Scientific Publishing, Karlsruhe; 2018:279-295. doi:10.5445/KSP/1000085935"},"title":"Identifying Characteristic Gait Patterns in Real-World Scenarios","place":"Dortmund","_id":"2004","doi":"10.5445/KSP/1000085935","user_id":"15514","type":"conference","publisher":"KIT Scientific Publishing, Karlsruhe","department":[{"_id":"DEP5023"}],"conference":{"end_date":"2018-11-30","start_date":"2018-11-29","name":"28. WORKSHOP COMPUTATIONAL INTELLIGENCE","location":"Dortmund"},"abstract":[{"text":"The population of many industrialised countries are among the oldest in the world. In Germany, one-fifth of the population is currently over 65 years old, in 2050 it will be more than one-third [1]. Due to this demographic change, there will be more elderly people with chronic disease progressions and the number of neurodegenerative diseases such as dementia or Parkinson's disease will increase [1]. In this context, innovative approaches in medicine and care are particularly relevant for the modernisation of person-oriented …","lang":"eng"}],"publication_status":"published"},{"oa":"1","_id":"2005","doi":"10.1109/ETFA.2018.8502485","place":"Torino, Italy","keyword":["Task analysis","Software","Linear discriminant analysis","Dimensionality reduction","Mathematical model","Covariance matrices","Measurement"],"language":[{"iso":"eng"}],"publication":"23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)","type":"conference","date_created":"2019-11-25T08:35:44Z","user_id":"15514","date_updated":"2023-03-15T13:49:38Z","abstract":[{"text":"We present a method for the fast and robust linear classification of badly conditioned data. In our considerations, badly conditioned data are such data which are numerically difficult to handle. Due to, e.g. a large number of features or a large number of objects representing classes as well as noise, outliers or incompleteness, the common software computation of the discriminating linear combination of features between classes fails or is extremely time consuming. The theoretical foundations of our approach are based on the single feature ranking, which allows fast calculation of the approximative initial classification boundary. For the increasing of classification accuracy of this boundary, the refinement is performed in the lower dimensional space. Our approach is tested on several datasets from UCI Reposi-tiory. Experimental results indicate high classification accuracy of the approach. For the modern real industrial applications such a method is especially suitable in the Cyber-Physical-System environments and provides a part of the workflow for the automated classifier design","lang":"eng"}],"year":2018,"main_file_link":[{"open_access":"1","url":"https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8502485"}],"author":[{"first_name":"Helene","last_name":"Dörksen","full_name":"Dörksen, Helene","id":"46416"},{"orcid":"0000-0002-3325-7887","last_name":"Lohweg","id":"1804","first_name":"Volker","full_name":"Lohweg, Volker"}],"conference":{"name":" IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA) 2018","location":" Turin, Italy ","start_date":"2018-09-04","end_date":"2018-09-07"},"department":[{"_id":"DEP5023"}],"status":"public","title":"Linear Classification of Badly Conditioned Data. ","citation":{"van":"Dörksen H, Lohweg V. Linear Classification of Badly Conditioned Data. . In: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy; 2018.","bjps":"Dörksen H and Lohweg V (2018) Linear Classification of Badly Conditioned Data. . 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy.","havard":"H. Dörksen, V. Lohweg, Linear Classification of Badly Conditioned Data. , in: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Torino, Italy, 2018.","mla":"Dörksen, Helene, and Volker Lohweg. “Linear Classification of Badly Conditioned Data. .” 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2018, doi:10.1109/ETFA.2018.8502485.","ufg":"Dörksen, Helene/Lohweg, Volker (2018): Linear Classification of Badly Conditioned Data. , in: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Torino, Italy.","apa":"Dörksen, H., & Lohweg, V. (2018). Linear Classification of Badly Conditioned Data. . In 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy. https://doi.org/10.1109/ETFA.2018.8502485","chicago":"Dörksen, Helene, and Volker Lohweg. “Linear Classification of Badly Conditioned Data. .” In 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy, 2018. https://doi.org/10.1109/ETFA.2018.8502485.","short":"H. Dörksen, V. Lohweg, in: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Torino, Italy, 2018.","chicago-de":"Dörksen, Helene und Volker Lohweg. 2018. Linear Classification of Badly Conditioned Data. . In: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy. doi:10.1109/ETFA.2018.8502485, .","din1505-2-1":"Dörksen, Helene ; Lohweg, Volker: Linear Classification of Badly Conditioned Data. . In: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy, 2018","ama":"Dörksen H, Lohweg V. Linear Classification of Badly Conditioned Data. . In: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy; 2018. doi:10.1109/ETFA.2018.8502485","ieee":"H. Dörksen and V. Lohweg, “Linear Classification of Badly Conditioned Data. ,” in 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Turin, Italy , 2018."}},{"date_updated":"2024-04-15T12:53:42Z","user_id":"83778","date_created":"2019-11-25T08:35:46Z","type":"conference","publication":"23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)","doi":" 10.1109/ETFA.2018.8502472","_id":"2006","language":[{"iso":"eng"}],"place":"Torino, Italy","citation":{"apa":"Bator, M., Wissel, C., Dicks, A., & Lohweg, V. (2018). Feature Extraction for a Conditioning Monitoring System in a Bottling Process. 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). 23rd International Conference on Emerging Technologies and Factory Automation (ETFA), Torino, Italy. https://doi.org/ 10.1109/ETFA.2018.8502472","chicago":"Bator, Martyna, Christian Wissel, Alexander Dicks, and Volker Lohweg. “Feature Extraction for a Conditioning Monitoring System in a Bottling Process.” In 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy, 2018. https://doi.org/ 10.1109/ETFA.2018.8502472.","van":"Bator M, Wissel C, Dicks A, Lohweg V. Feature Extraction for a Conditioning Monitoring System in a Bottling Process. In: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy; 2018.","ufg":"Bator, Martyna u. a.: Feature Extraction for a Conditioning Monitoring System in a Bottling Process., in: o. Hg.: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Torino, Italy 2018.","mla":"Bator, Martyna, et al. “Feature Extraction for a Conditioning Monitoring System in a Bottling Process.” 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2018, https://doi.org/ 10.1109/ETFA.2018.8502472.","havard":"M. Bator, C. Wissel, A. Dicks, V. Lohweg, Feature Extraction for a Conditioning Monitoring System in a Bottling Process., in: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Torino, Italy, 2018.","bjps":"Bator M et al. (2018) Feature Extraction for a Conditioning Monitoring System in a Bottling Process. 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy.","short":"M. Bator, C. Wissel, A. Dicks, V. Lohweg, in: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Torino, Italy, 2018.","chicago-de":"Bator, Martyna, Christian Wissel, Alexander Dicks und Volker Lohweg. 2018. Feature Extraction for a Conditioning Monitoring System in a Bottling Process. In: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy. doi: 10.1109/ETFA.2018.8502472, .","din1505-2-1":"Bator, Martyna ; Wissel, Christian ; Dicks, Alexander ; Lohweg, Volker: Feature Extraction for a Conditioning Monitoring System in a Bottling Process. In: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy, 2018","ieee":"M. Bator, C. Wissel, A. Dicks, and V. Lohweg, “Feature Extraction for a Conditioning Monitoring System in a Bottling Process.,” presented at the 23rd International Conference on Emerging Technologies and Factory Automation (ETFA), Torino, Italy, 2018. doi: 10.1109/ETFA.2018.8502472.","ama":"Bator M, Wissel C, Dicks A, Lohweg V. Feature Extraction for a Conditioning Monitoring System in a Bottling Process. In: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). ; 2018. doi: 10.1109/ETFA.2018.8502472"},"title":"Feature Extraction for a Conditioning Monitoring System in a Bottling Process.","status":"public","abstract":[{"text":"We present an approach for feature extraction in the context of condition monitoring of a bottling process. A special focus lies on the characterisation and evaluation of liquid textures. The approach will feed into a sensor and information fusion system to monitor a bottling process. Requirements like real-time capabilities, data reduction and resource limitations necessitate a fusion approach which capture physical effects of different sensors, extract appropriate features and combine them into one state for the complete filling process. Special attention is paid to the feature extraction of the visual sensor signals to monitor the filling level, the amount of foam and the degree of turbulence in the liquid.","lang":"eng"}],"department":[{"_id":"DEP5023"},{"_id":"DEP1308"}],"conference":{"end_date":"2018-09-07","start_date":"2018-09-04","name":" 23rd International Conference on Emerging Technologies and Factory Automation (ETFA)","location":"Torino, Italy"},"author":[{"full_name":"Bator, Martyna","first_name":"Martyna","last_name":"Bator","id":"46440"},{"full_name":"Wissel, Christian","first_name":"Christian","last_name":"Wissel","id":"59157"},{"id":"1853","full_name":"Dicks, Alexander","first_name":"Alexander","last_name":"Dicks"},{"full_name":"Lohweg, Volker","first_name":"Volker","last_name":"Lohweg","id":"1804","orcid":"0000-0002-3325-7887"}],"year":"2018","main_file_link":[{"url":"https://ieeexplore.ieee.org/abstract/document/8502472"}]},{"citation":{"din1505-2-1":"Holst, Christoph-Alexander ; Lohweg, Volker: A Conflict-Based Drift Detection And Adaptation Approach for Multisensor Information Fusion. In: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy, 2018","chicago-de":"Holst, Christoph-Alexander und Volker Lohweg. 2018. A Conflict-Based Drift Detection And Adaptation Approach for Multisensor Information Fusion. In: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy. doi:10.1109/ETFA.2018.8502571, .","short":"C.-A. Holst, V. Lohweg, in: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Torino, Italy, 2018.","chicago":"Holst, Christoph-Alexander, and Volker Lohweg. “A Conflict-Based Drift Detection And Adaptation Approach for Multisensor Information Fusion.” In 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy, 2018. https://doi.org/10.1109/ETFA.2018.8502571.","apa":"Holst, C.-A., & Lohweg, V. (2018). A Conflict-Based Drift Detection And Adaptation Approach for Multisensor Information Fusion. In 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy. https://doi.org/10.1109/ETFA.2018.8502571","mla":"Holst, Christoph-Alexander, and Volker Lohweg. “A Conflict-Based Drift Detection And Adaptation Approach for Multisensor Information Fusion.” 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2018, doi:10.1109/ETFA.2018.8502571.","bjps":"Holst C-A and Lohweg V (2018) A Conflict-Based Drift Detection And Adaptation Approach for Multisensor Information Fusion. 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy.","havard":"C.-A. Holst, V. Lohweg, A Conflict-Based Drift Detection And Adaptation Approach for Multisensor Information Fusion, in: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Torino, Italy, 2018.","ufg":"Holst, Christoph-Alexander/Lohweg, Volker (2018): A Conflict-Based Drift Detection And Adaptation Approach for Multisensor Information Fusion, in: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Torino, Italy.","van":"Holst C-A, Lohweg V. A Conflict-Based Drift Detection And Adaptation Approach for Multisensor Information Fusion. In: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy; 2018.","ieee":"C.-A. Holst and V. Lohweg, “A Conflict-Based Drift Detection And Adaptation Approach for Multisensor Information Fusion,” in 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Torino, Italy, 2018.","ama":"Holst C-A, Lohweg V. A Conflict-Based Drift Detection And Adaptation Approach for Multisensor Information Fusion. In: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy; 2018. doi:10.1109/ETFA.2018.8502571"},"publication_status":"published","title":"A Conflict-Based Drift Detection And Adaptation Approach for Multisensor Information Fusion","status":"public","main_file_link":[{"url":"https://ieeexplore.ieee.org/abstract/document/8502571"}],"author":[{"full_name":"Holst, Christoph-Alexander","id":"64782","last_name":"Holst","first_name":"Christoph-Alexander"},{"first_name":"Volker","id":"1804","last_name":"Lohweg","full_name":"Lohweg, Volker","orcid":"0000-0002-3325-7887"}],"year":2018,"department":[{"_id":"DEP5023"}],"conference":{"name":"IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA) 2018","location":"Torino, Italy","end_date":"2018-09-07","start_date":"2018-09-04"},"abstract":[{"lang":"eng","text":"Multisensor systems are susceptible to sensor ageing effects as well as to environmental changes. Due to these effects, the distribution of sensor measurements may change over time, which is referred to as sensor drift. A multisensor system which adapts to drift by self-monitoring is more durable, requires less manual maintenance, and provides information of higher quality. This contribution proposes an approach for detecting and adapting to sensor drift. The proposed detection algorithm determines the reliability of a sensor based on fuzzy pattern classifiers and a consistency measure. By this means, the inherent redundancy in multisensor systems is exploited to detect drift. Detected drift leads then to a retraining of the classifier on batched data guided by information fusion. The retraining incorporates the estimated magnitude of the drift. The proposed algorithms are evaluated in comparison with state-of-the-art methods in the scope of a publicly available dataset. It is shown that the drift detection algorithm yields results similar to the benchmark algorithm but is less computationally complex. Relearning with the drift-adapted approach results in more robust classifiers with regard to potential future drift."}],"user_id":"15514","date_updated":"2023-03-15T13:49:38Z","publication":"23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)","date_created":"2019-11-25T08:35:47Z","type":"conference","place":"Torino, Italy","keyword":["Multisensor systems","Temperature measurement","Current measurement","Redundancy","Pollution measurement","Detection algorithms"],"language":[{"iso":"eng"}],"_id":"2007","doi":"10.1109/ETFA.2018.8502571"},{"abstract":[{"lang":"eng","text":"We concentrate our research activities on the multivariate feature selection, which is one important part of many machine learning tasks. In partucular, Linear Discriminant Analysis [1] belongs to the state-of-the-art methods for the multivariate analysis. From the theoretical point of view, it is the well-known fact that LDA is best suitable in the case the features are Gaussian distributed.\r\nIn the theoretical part of the presented paper, we analyse the properties of the multivariate discriminant analysis with respect to the feature selection. In this context, we consider a binary supervised learning task and assume that the features are Gaussian distributed. The discriminant analysis solves the mentioned supervised learning task by maximising of the discriminant value, calculated for the linear combination of the features.\r\nThe initial LDA solution a 2 Rd is considered for all given features from the feature space X \u001a Rd. The corresponding discriminant is calculated by the formula:\r\nd(a; x1, . . . , xd) := (μ+ − μ−)2\r\n\u001b2+\r\n+ \u001b2−\r\n,\r\nwhere μ+/− are projected class means and \u001b2 +/− are projected class variances (with respect to a). We proof several propositions with the aim to find subsets of the features having higher discriminant value as original d(a; x1, . . . , xd). For the suitability in the real world settings, here we are interested in fast searching for such subsets.\r\nThe performance of the mentioned propositions is examined experimentally on datasets from UCI repository [2]. Several application scenarien will be discussed and tested on the datasets. In addition, tests show that the performance can be achieved also in the case the features are not Gaussian distributed."}],"author":[{"id":"46416","first_name":"Helene","last_name":"Dörksen","full_name":"Dörksen, Helene"},{"orcid":"0000-0002-3325-7887","first_name":"Volker","last_name":"Lohweg","full_name":"Lohweg, Volker","id":"1804"}],"year":2018,"department":[{"_id":"DEP5023"}],"conference":{"name":"European Conference on Data Analysis","location":"Paderborn","end_date":"2018-07-06","start_date":"2018-07-04"},"status":"public","title":"Multivariate Gaussian Feature Selection. ","citation":{"din1505-2-1":"Dörksen, Helene ; Lohweg, Volker: Multivariate Gaussian Feature Selection. . In: European Conference on Data Analysis (ECDA2018). Paderborn, Germany, 2018","chicago-de":"Dörksen, Helene und Volker Lohweg. 2018. Multivariate Gaussian Feature Selection. . In: European Conference on Data Analysis (ECDA2018). Paderborn, Germany.","short":"H. Dörksen, V. Lohweg, in: European Conference on Data Analysis (ECDA2018), Paderborn, Germany, 2018.","chicago":"Dörksen, Helene, and Volker Lohweg. “Multivariate Gaussian Feature Selection. .” In European Conference on Data Analysis (ECDA2018). Paderborn, Germany, 2018.","ieee":"H. Dörksen and V. Lohweg, “Multivariate Gaussian Feature Selection. ,” in European Conference on Data Analysis (ECDA2018), Paderborn, 2018.","apa":"Dörksen, H., & Lohweg, V. (2018). Multivariate Gaussian Feature Selection. . In European Conference on Data Analysis (ECDA2018). Paderborn, Germany.","havard":"H. Dörksen, V. Lohweg, Multivariate Gaussian Feature Selection. , in: European Conference on Data Analysis (ECDA2018), Paderborn, Germany, 2018.","mla":"Dörksen, Helene, and Volker Lohweg. “Multivariate Gaussian Feature Selection. .” European Conference on Data Analysis (ECDA2018), 2018.","bjps":"Dörksen H and Lohweg V (2018) Multivariate Gaussian Feature Selection. . European Conference on Data Analysis (ECDA2018). Paderborn, Germany.","ufg":"Dörksen, Helene/Lohweg, Volker (2018): Multivariate Gaussian Feature Selection. , in: European Conference on Data Analysis (ECDA2018), Paderborn, Germany.","ama":"Dörksen H, Lohweg V. Multivariate Gaussian Feature Selection. . In: European Conference on Data Analysis (ECDA2018). Paderborn, Germany; 2018.","van":"Dörksen H, Lohweg V. Multivariate Gaussian Feature Selection. . In: European Conference on Data Analysis (ECDA2018). Paderborn, Germany; 2018."},"_id":"2008","keyword":["multivariate feature selection","Gaussian distribution","linear discriminant analysis"],"place":"Paderborn, Germany","language":[{"iso":"eng"}],"publication":"European Conference on Data Analysis (ECDA2018)","date_created":"2019-11-25T08:35:48Z","type":"conference","user_id":"15514","date_updated":"2023-03-15T13:49:38Z"},{"abstract":[{"lang":"eng","text":"The aim of sensor orchestration is to design and organise multi-sensor systems both to reduce manual design efforts and to facilitate complex sensor systems. A sensor orchestration is required to adapt to non-stationary environments, even if it is applied in streaming data scenarios where labelled data are scarce or not available. Without labels in dynamic environments, it is challenging to determine not only the accuracy of a classifier but also its reliability. This contribution proposes monitoring algorithms intended to support sensor orchestration in classification tasks in non-stationary environments. Proposed measures regard the relevance of features, the separability of classes, and the classifier's reliability. The proposed monitoring algorithms are evaluated regarding their applicability in the scope of a publicly available and synthetically created collection of datasets. It is shown that the approach (i) is able to distinguish relevant from irrelevant features, (ii) measures class separability as class representations drift through feature space, and (iii) marks a classifier as unreliable if errors in the drift-adaptation occur."}],"author":[{"last_name":"Holst","id":"64782","first_name":"Christoph-Alexander","full_name":"Holst, Christoph-Alexander"},{"orcid":"0000-0002-3325-7887","id":"1804","last_name":"Lohweg","full_name":"Lohweg, Volker","first_name":"Volker"}],"main_file_link":[{"open_access":"1","url":"https://dl.acm.org/ft_gateway.cfm?id=3203228&ftid=1990918&dwn=1&CFID=118496599&CFTOKEN=78ae977fe9bab251-FBE29E78-FC08-9C3A-B5261CFF94BFEF7E"}],"year":2018,"conference":{"location":"Ischia, Italy","name":"18 Proceedings of the 15th ACM International Conference on Computing ","start_date":"2018-05-08","end_date":"2018-05-10"},"department":[{"_id":"DEP5023"}],"publisher":" New York, NY ","status":"public","page":"363 - 370","title":"Supporting Sensor Orchestration in Non-Stationary Environments","citation":{"van":"Holst C-A, Lohweg V. Supporting Sensor Orchestration in Non-Stationary Environments. In: ACM International Conference on Computing Frontiers 2018. ACM: New York, NY ; 2018. p. 363–70.","mla":"Holst, Christoph-Alexander, and Volker Lohweg. “Supporting Sensor Orchestration in Non-Stationary Environments.” ACM International Conference on Computing Frontiers 2018, New York, NY , 2018, pp. 363–70, doi:10.1145/3203217.3203228.","havard":"C.-A. Holst, V. Lohweg, Supporting Sensor Orchestration in Non-Stationary Environments, in: ACM International Conference on Computing Frontiers 2018, New York, NY , ACM, 2018: pp. 363–370.","bjps":"Holst C-A and Lohweg V (2018) Supporting Sensor Orchestration in Non-Stationary Environments. ACM International Conference on Computing Frontiers 2018. ACM: New York, NY , pp. 363–370.","ufg":"Holst, Christoph-Alexander/Lohweg, Volker (2018): Supporting Sensor Orchestration in Non-Stationary Environments, in: ACM International Conference on Computing Frontiers 2018, ACM, S. 363–370.","apa":"Holst, C.-A., & Lohweg, V. (2018). Supporting Sensor Orchestration in Non-Stationary Environments. In ACM International Conference on Computing Frontiers 2018 (pp. 363–370). ACM: New York, NY . https://doi.org/10.1145/3203217.3203228","chicago":"Holst, Christoph-Alexander, and Volker Lohweg. “Supporting Sensor Orchestration in Non-Stationary Environments.” In ACM International Conference on Computing Frontiers 2018, 363–70. ACM: New York, NY , 2018. https://doi.org/10.1145/3203217.3203228.","short":"C.-A. Holst, V. Lohweg, in: ACM International Conference on Computing Frontiers 2018, New York, NY , ACM, 2018, pp. 363–370.","chicago-de":"Holst, Christoph-Alexander und Volker Lohweg. 2018. Supporting Sensor Orchestration in Non-Stationary Environments. In: ACM International Conference on Computing Frontiers 2018, 363–370. ACM: New York, NY . doi:10.1145/3203217.3203228, .","din1505-2-1":"Holst, Christoph-Alexander ; Lohweg, Volker: Supporting Sensor Orchestration in Non-Stationary Environments. In: ACM International Conference on Computing Frontiers 2018. ACM : New York, NY , 2018, S. 363–370","ama":"Holst C-A, Lohweg V. Supporting Sensor Orchestration in Non-Stationary Environments. In: ACM International Conference on Computing Frontiers 2018. ACM: New York, NY ; 2018:363-370. doi:10.1145/3203217.3203228","ieee":"C.-A. Holst and V. Lohweg, “Supporting Sensor Orchestration in Non-Stationary Environments,” in ACM International Conference on Computing Frontiers 2018, Ischia, Italy, 2018, pp. 363–370."},"oa":"1","_id":"2009","doi":"10.1145/3203217.3203228","place":"ACM","language":[{"iso":"eng"}],"publication":"ACM International Conference on Computing Frontiers 2018","publication_identifier":{"eisbn":["978-1-4503-5761-6"]},"type":"conference","date_created":"2019-11-25T08:35:50Z","user_id":"15514","date_updated":"2023-03-15T13:49:38Z"},{"year":2018,"author":[{"id":"59157","last_name":"Wissel","first_name":"Christian","full_name":"Wissel, Christian"},{"last_name":"Deppe","id":"52121","full_name":"Deppe, Sahar","first_name":"Sahar"},{"orcid":"0000-0002-3325-7887","first_name":"Volker","last_name":"Lohweg","full_name":"Lohweg, Volker","id":"1804"}],"department":[{"_id":"DEP5023"}],"issue":"1/2 ","status":"public","publisher":"TeDo-Verl","title":"3D-Inspektion bei 600m/s - Feinste 3D-Strukturen inline mit hohem Tempo prüfen","citation":{"apa":"Wissel, C., Deppe, S., & Lohweg, V. (2018). 3D-Inspektion bei 600m/s - Feinste 3D-Strukturen inline mit hohem Tempo prüfen. SPS-Magazin Ausgabe 1+2/2018, TeDo Verlag GmbH, Marburg, (1/2).","ieee":"C. Wissel, S. Deppe, and V. Lohweg, “3D-Inspektion bei 600m/s - Feinste 3D-Strukturen inline mit hohem Tempo prüfen,” SPS-Magazin Ausgabe 1+2/2018, TeDo Verlag GmbH, Marburg, no. 1/2, 2018.","chicago":"Wissel, Christian, Sahar Deppe, and Volker Lohweg. “3D-Inspektion bei 600m/s - Feinste 3D-Strukturen inline mit hohem Tempo prüfen.” SPS-Magazin Ausgabe 1+2/2018, TeDo Verlag GmbH, Marburg, no. 1/2 (2018).","van":"Wissel C, Deppe S, Lohweg V. 3D-Inspektion bei 600m/s - Feinste 3D-Strukturen inline mit hohem Tempo prüfen. SPS-Magazin Ausgabe 1+2/2018, TeDo Verlag GmbH, Marburg. 2018;(1/2).","ama":"Wissel C, Deppe S, Lohweg V. 3D-Inspektion bei 600m/s - Feinste 3D-Strukturen inline mit hohem Tempo prüfen. SPS-Magazin Ausgabe 1+2/2018, TeDo Verlag GmbH, Marburg. 2018;(1/2).","ufg":"Wissel, Christian et. al. (2018): 3D-Inspektion bei 600m/s - Feinste 3D-Strukturen inline mit hohem Tempo prüfen, in: SPS-Magazin Ausgabe 1+2/2018, TeDo Verlag GmbH, Marburg (1/2).","mla":"Wissel, Christian, et al. “3D-Inspektion bei 600m/s - Feinste 3D-Strukturen inline mit hohem Tempo prüfen.” SPS-Magazin Ausgabe 1+2/2018, TeDo Verlag GmbH, Marburg, no. 1/2, TeDo-Verl, 2018.","havard":"C. Wissel, S. Deppe, V. Lohweg, 3D-Inspektion bei 600m/s - Feinste 3D-Strukturen inline mit hohem Tempo prüfen, SPS-Magazin Ausgabe 1+2/2018, TeDo Verlag GmbH, Marburg. (2018).","bjps":"Wissel C, Deppe S and Lohweg V (2018) 3D-Inspektion bei 600m/s - Feinste 3D-Strukturen inline mit hohem Tempo prüfen. SPS-Magazin Ausgabe 1+2/2018, TeDo Verlag GmbH, Marburg.","short":"C. Wissel, S. Deppe, V. Lohweg, SPS-Magazin Ausgabe 1+2/2018, TeDo Verlag GmbH, Marburg (2018).","din1505-2-1":"Wissel, Christian ; Deppe, Sahar ; Lohweg, Volker: 3D-Inspektion bei 600m/s - Feinste 3D-Strukturen inline mit hohem Tempo prüfen. In: SPS-Magazin Ausgabe 1+2/2018, TeDo Verlag GmbH, Marburg. Marburg, TeDo-Verl (2018), Nr. 1/2","chicago-de":"Wissel, Christian, Sahar Deppe und Volker Lohweg. 2018. 3D-Inspektion bei 600m/s - Feinste 3D-Strukturen inline mit hohem Tempo prüfen. SPS-Magazin Ausgabe 1+2/2018, TeDo Verlag GmbH, Marburg, Nr. 1/2."},"publication_status":"published","place":"Marburg","language":[{"iso":"ger"}],"_id":"2010","publication":"SPS-Magazin Ausgabe 1+2/2018, TeDo Verlag GmbH, Marburg","publication_identifier":{"issn":["0935-0187 "]},"type":"journal_article","date_created":"2019-11-25T08:35:51Z","user_id":"15514","date_updated":"2023-03-15T13:49:38Z"},{"_id":"2011","language":[{"iso":"eng"}],"place":" CA, USA","date_updated":"2024-05-17T13:04:57Z","user_id":"83781","date_created":"2019-11-25T08:35:52Z","type":"conference","publication":"Optical Document Security - The Conference on Optical Security and Counterfeit Detection XII San Francisco","status":"public","conference":{"end_date":"2018-01-31","start_date":"2018-01-29","location":"San Francisco, USA","name":"XII. Optical Document Security (ODS)Conference"},"department":[{"_id":"DEP5023"},{"_id":"DEP4027"}],"year":"2018","author":[{"id":"1804","full_name":"Lohweg, Volker","last_name":"Lohweg","first_name":"Volker","orcid":"0000-0002-3325-7887"},{"full_name":"Funk, Mark","first_name":"Mark","id":"52473","last_name":"Funk"},{"full_name":"Scharf, Matthias","first_name":"Matthias","id":"65179","last_name":"Scharf"},{"first_name":"Helene","id":"46416","full_name":"Dörksen, Helene","last_name":"Dörksen"},{"last_name":"Danneel","first_name":"Hans-Jürgen","id":"12231","full_name":"Danneel, Hans-Jürgen"},{"first_name":"Michael","full_name":"Hübner, Michael","last_name":"Hübner"},{"id":"2128","first_name":"Johannes","last_name":"Schaede","full_name":"Schaede, Johannes"},{"full_name":"Thony, Emmanuel","first_name":"Emmanuel","last_name":"Thony"},{"full_name":"Knobloch, Alexander","last_name":"Knobloch","first_name":"Alexander"},{"last_name":"Lee","full_name":"Lee, Dinh Khoi","first_name":"Dinh Khoi"},{"id":"1825","last_name":"Mönks","full_name":"Mönks, Uwe","first_name":"Uwe"},{"first_name":"Eugen","last_name":"Gillich","full_name":"Gillich, Eugen","id":"1706"}],"publication_status":"submitted","citation":{"ama":"Lohweg V, Funk M, Scharf M, et al. smartBN—Intelligent Protection and Authentication in Payment Transactions by Smart Banknotes. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection XII San Francisco.","ieee":"V. Lohweg et al., “smartBN—Intelligent Protection and Authentication in Payment Transactions by Smart Banknotes,” presented at the XII. Optical Document Security (ODS)Conference, San Francisco, USA.","van":"Lohweg V, Funk M, Scharf M, Dörksen H, Danneel HJ, Hübner M, et al. smartBN—Intelligent Protection and Authentication in Payment Transactions by Smart Banknotes. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection XII San Francisco. CA, USA;","ufg":"Lohweg, Volker u. a.: smartBN—Intelligent Protection and Authentication in Payment Transactions by Smart Banknotes, in: o. Hg.: Optical Document Security - The Conference on Optical Security and Counterfeit Detection XII San Francisco, CA, USA o. J.","mla":"Lohweg, Volker, et al. “SmartBN—Intelligent Protection and Authentication in Payment Transactions by Smart Banknotes.” Optical Document Security - The Conference on Optical Security and Counterfeit Detection XII San Francisco.","bjps":"Lohweg V et al. (n.d.) SmartBN—Intelligent Protection and Authentication in Payment Transactions by Smart Banknotes. Optical Document Security - The Conference on Optical Security and Counterfeit Detection XII San Francisco. CA, USA.","havard":"V. Lohweg, M. Funk, M. Scharf, H. Dörksen, H.-J. Danneel, M. Hübner, J. Schaede, E. Thony, A. Knobloch, D.K. Lee, U. Mönks, E. Gillich, smartBN—Intelligent Protection and Authentication in Payment Transactions by Smart Banknotes, in: Optical Document Security - The Conference on Optical Security and Counterfeit Detection XII San Francisco, CA, USA, n.d.","apa":"Lohweg, V., Funk, M., Scharf, M., Dörksen, H., Danneel, H.-J., Hübner, M., Schaede, J., Thony, E., Knobloch, A., Lee, D. K., Mönks, U., & Gillich, E. (n.d.). smartBN—Intelligent Protection and Authentication in Payment Transactions by Smart Banknotes. Optical Document Security - The Conference on Optical Security and Counterfeit Detection XII San Francisco. XII. Optical Document Security (ODS)Conference, San Francisco, USA.","chicago":"Lohweg, Volker, Mark Funk, Matthias Scharf, Helene Dörksen, Hans-Jürgen Danneel, Michael Hübner, Johannes Schaede, et al. “SmartBN—Intelligent Protection and Authentication in Payment Transactions by Smart Banknotes.” In Optical Document Security - The Conference on Optical Security and Counterfeit Detection XII San Francisco. CA, USA, n.d.","short":"V. Lohweg, M. Funk, M. Scharf, H. Dörksen, H.-J. Danneel, M. Hübner, J. Schaede, E. Thony, A. Knobloch, D.K. Lee, U. Mönks, E. Gillich, in: Optical Document Security - The Conference on Optical Security and Counterfeit Detection XII San Francisco, CA, USA, n.d.","din1505-2-1":"Lohweg, Volker ; Funk, Mark ; Scharf, Matthias ; Dörksen, Helene ; Danneel, Hans-Jürgen ; Hübner, Michael ; Schaede, Johannes ; Thony, Emmanuel ; u. a.: smartBN—Intelligent Protection and Authentication in Payment Transactions by Smart Banknotes. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection XII San Francisco. CA, USA","chicago-de":"Lohweg, Volker, Mark Funk, Matthias Scharf, Helene Dörksen, Hans-Jürgen Danneel, Michael Hübner, Johannes Schaede, u. a. smartBN—Intelligent Protection and Authentication in Payment Transactions by Smart Banknotes. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection XII San Francisco. CA, USA."},"title":"smartBN—Intelligent Protection and Authentication in Payment Transactions by Smart Banknotes"},{"abstract":[{"lang":"eng","text":"In this contribution, a model-based method for analyzing and optimizing energy systems comprising the electrical, thermal and chemical domain is presented. The method is a variant of the Hardware-in-the-Loop (HIL) simulation where virtual components are combined with real experimental components of the evaluated system. In order to integrate the real components with minimal instrumentation efforts, measured quantities are included as information flows, only, while the physical power flows are connected to local supply structures, like the electric grid or gas distribution system. This contribution incorporates a biocatalytic methanation reactor as an experimental component to convert hydrogen and carbon dioxide into methane. Compared to the well-known Sabatier process, this reactor operates at lower temperature levels and does not need pure carbon dioxide. This allows a dynamic operation and makes it more flexible regarding the carbon dioxide source whose availability is often critically discussed. The virtual energy components are represented by real-time capable models describing their physical behavior. In a test scenario, the electrical energy supply of residential quarters is investigated where photovoltaic data and a modeled fuel cell system are included beside the real experimental methanation process. For the dynamical management of energy and operating gases, electrical and chemical storage units are considered as virtual components, as well. The previous described energy system allows various strategies regarding the operation of the components, especially the storage units. Therefore an optimized energy management is reasonable, based on a designated criterion, e.g. minimal operating costs or maximum energy efficiency. In order to find the global optimum, the method of dynamic programming is used to determine the optimal control sequence for an assumed operation case, e.g. given by the photovoltaic yield of the considered day. Finally, the found solution is tested in real-time by the proposed HIL simulation."}],"department":[{"_id":"DEP6020"}],"author":[{"full_name":"Griese, Martin","id":"52308","last_name":"Griese","first_name":"Martin"},{"last_name":"Hoffrath","first_name":"M.","full_name":"Hoffrath, M."},{"id":"43927","last_name":"Broeker","full_name":"Broeker, Timo","first_name":"Timo"},{"last_name":"Schneider","first_name":"J.","full_name":"Schneider, J."},{"id":"46242","last_name":"Schulte","first_name":"Thomas","full_name":"Schulte, Thomas"}],"year":2018,"status":"public","title":"HIL simulation of an optimized energy management incorporating an experimental biocatalytic methanation reactor","article_type":"original","citation":{"ama":"Griese M, Hoffrath M, Broeker T, Schneider J, Schulte T. HIL simulation of an optimized energy management incorporating an experimental biocatalytic methanation reactor. ECOS. 2018.","ieee":"M. Griese, M. Hoffrath, T. Broeker, J. Schneider, and T. Schulte, “HIL simulation of an optimized energy management incorporating an experimental biocatalytic methanation reactor,” ECOS, 2018.","ufg":"Griese, Martin et. al. (2018): HIL simulation of an optimized energy management incorporating an experimental biocatalytic methanation reactor, in: ECOS.","havard":"M. Griese, M. Hoffrath, T. Broeker, J. Schneider, T. Schulte, HIL simulation of an optimized energy management incorporating an experimental biocatalytic methanation reactor, ECOS. (2018).","bjps":"Griese M et al. (2018) HIL Simulation of an Optimized Energy Management Incorporating an Experimental Biocatalytic Methanation Reactor. ECOS.","mla":"Griese, Martin, et al. “HIL Simulation of an Optimized Energy Management Incorporating an Experimental Biocatalytic Methanation Reactor.” ECOS, 2018.","van":"Griese M, Hoffrath M, Broeker T, Schneider J, Schulte T. HIL simulation of an optimized energy management incorporating an experimental biocatalytic methanation reactor. ECOS. 2018;","chicago":"Griese, Martin, M. Hoffrath, Timo Broeker, J. Schneider, and Thomas Schulte. “HIL Simulation of an Optimized Energy Management Incorporating an Experimental Biocatalytic Methanation Reactor.” ECOS, 2018.","apa":"Griese, M., Hoffrath, M., Broeker, T., Schneider, J., & Schulte, T. (2018). HIL simulation of an optimized energy management incorporating an experimental biocatalytic methanation reactor. ECOS.","din1505-2-1":"Griese, Martin ; Hoffrath, M. ; Broeker, Timo ; Schneider, J. ; Schulte, Thomas: HIL simulation of an optimized energy management incorporating an experimental biocatalytic methanation reactor. In: ECOS. Guimarães (2018)","chicago-de":"Griese, Martin, M. Hoffrath, Timo Broeker, J. Schneider und Thomas Schulte. 2018. HIL simulation of an optimized energy management incorporating an experimental biocatalytic methanation reactor. ECOS.","short":"M. Griese, M. Hoffrath, T. Broeker, J. Schneider, T. Schulte, ECOS (2018)."},"_id":"4001","language":[{"iso":"eng"}],"place":"Guimarães","date_created":"2020-11-23T12:01:30Z","type":"journal_article","publication":"ECOS","date_updated":"2023-03-15T13:49:49Z","user_id":"74004"},{"publication_status":"published","publisher":"MDPI","abstract":[{"text":"Plug-in hybrid electric vehicles are developed in order to reduce the fuel consumption and the emission of carbon dioxide. Besides the series, parallel and power split configurations are commonly used for conventional hybrid electric vehicles, and multimode transmissions are used for plug-in hybrid electric vehicles, which are able to switch between different modes like parallel or series operation of the combustion engine and electric motor. Several concepts have already been discussed and presented. These concepts comprise novel structures and multi-speed operation for the combustion engine and the electric motor, respectively. For improving the fuel and energy consumption, model-based optimizations of multimode transmissions are performed. In the first step of the optimization, the optimal number of gears and transmission ratios, as well as the corresponding fuel and energy savings, are estimated. Based on these results, a new multimode transmission concept with two-speed transmissions for the combustion engine and the electric motor has been developed. The knowledge of the concrete concept enables the further optimizations of the transmission ratios and the transmission control. In order to prove the benefit of the new and optimized transmission concept, powertrain simulations have been carried out. The new powertrain concept is compared to a powertrain concept with single-speed transmissions for the internal combustion engine (ICE) and electric motor operation. The new transmission concept enables a significant improvement of the fuel consumption.","lang":"eng"}],"issue":"1","department":[{"_id":"DEP6020"}],"intvolume":" 9","user_id":"74004","type":"journal_article","_id":"4029","place":"Basel","volume":9,"citation":{"ufg":"Geng, Stefan et. al. (2018): Model-Based Optimization of a Plug-In Hybrid Electric Powertrain with Multimode Transmission, in: World Electric Vehicle Journal 9 (1), S. 12.","bjps":"Geng S, Meier A and Schulte T (2018) Model-Based Optimization of a Plug-In Hybrid Electric Powertrain with Multimode Transmission. World Electric Vehicle Journal 9, 12.","havard":"S. Geng, A. Meier, T. Schulte, Model-Based Optimization of a Plug-In Hybrid Electric Powertrain with Multimode Transmission, World Electric Vehicle Journal. 9 (2018) 12.","mla":"Geng, Stefan, et al. “Model-Based Optimization of a Plug-In Hybrid Electric Powertrain with Multimode Transmission.” World Electric Vehicle Journal, vol. 9, no. 1, MDPI, 2018, p. 12.","van":"Geng S, Meier A, Schulte T. Model-Based Optimization of a Plug-In Hybrid Electric Powertrain with Multimode Transmission. World Electric Vehicle Journal. 2018;9(1):12.","chicago":"Geng, Stefan, A. Meier, and Thomas Schulte. “Model-Based Optimization of a Plug-In Hybrid Electric Powertrain with Multimode Transmission.” World Electric Vehicle Journal 9, no. 1 (2018): 12.","apa":"Geng, S., Meier, A., & Schulte, T. (2018). Model-Based Optimization of a Plug-In Hybrid Electric Powertrain with Multimode Transmission. World Electric Vehicle Journal, 9(1), 12.","din1505-2-1":"Geng, Stefan ; Meier, A. ; Schulte, Thomas: Model-Based Optimization of a Plug-In Hybrid Electric Powertrain with Multimode Transmission. In: World Electric Vehicle Journal Bd. 9. Basel, MDPI (2018), Nr. 1, S. 12","chicago-de":"Geng, Stefan, A. Meier und Thomas Schulte. 2018. Model-Based Optimization of a Plug-In Hybrid Electric Powertrain with Multimode Transmission. World Electric Vehicle Journal 9, Nr. 1: 12.","short":"S. Geng, A. Meier, T. Schulte, World Electric Vehicle Journal 9 (2018) 12.","ama":"Geng S, Meier A, Schulte T. Model-Based Optimization of a Plug-In Hybrid Electric Powertrain with Multimode Transmission. World Electric Vehicle Journal. 2018;9(1):12.","ieee":"S. Geng, A. Meier, and T. Schulte, “Model-Based Optimization of a Plug-In Hybrid Electric Powertrain with Multimode Transmission,” World Electric Vehicle Journal, vol. 9, no. 1, p. 12, 2018."},"title":"Model-Based Optimization of a Plug-In Hybrid Electric Powertrain with Multimode Transmission","page":"12","status":"public","main_file_link":[{"url":"https://www.mdpi.com/2032-6653/9/1/12"}],"year":2018,"author":[{"full_name":"Geng, Stefan","id":"43696","last_name":"Geng","first_name":"Stefan"},{"last_name":"Meier","full_name":"Meier, A.","first_name":"A."},{"last_name":"Schulte","first_name":"Thomas","full_name":"Schulte, Thomas","id":"46242"}],"date_updated":"2023-03-15T13:49:50Z","date_created":"2020-11-23T19:05:21Z","publication":"World Electric Vehicle Journal","language":[{"iso":"eng"}]},{"title":"Detmolder Bauphysiktag 2018","publication_status":"published","citation":{"chicago-de":"Schwickert, Susanne, Hrsg. 2018. Detmolder Bauphysiktag 2018. Lemgo.","din1505-2-1":"Schwickert, S. (Hrsg.): Detmolder Bauphysiktag 2018. Lemgo, 2018","short":"S. Schwickert, ed., Detmolder Bauphysiktag 2018, Lemgo, 2018.","ufg":"Schwickert, Susanne (Hg.) (2018): Detmolder Bauphysiktag 2018, Lemgo.","mla":"Schwickert, Susanne, editor. Detmolder Bauphysiktag 2018. 2018.","bjps":"Schwickert S (ed.) (2018) Detmolder Bauphysiktag 2018. Lemgo.","havard":"S. Schwickert, ed., Detmolder Bauphysiktag 2018, Lemgo, 2018.","van":"Schwickert S, editor. Detmolder Bauphysiktag 2018. Lemgo; 2018.","chicago":"Schwickert, Susanne, ed. Detmolder Bauphysiktag 2018. Lemgo, 2018.","apa":"Schwickert, S. (Ed.). (2018). Detmolder Bauphysiktag 2018. Presented at the Detmolder Bauphysiktag 2018, Lemgo.","ama":"Schwickert S, ed. Detmolder Bauphysiktag 2018. Lemgo; 2018.","ieee":"S. Schwickert, Ed., Detmolder Bauphysiktag 2018. Lemgo, 2018."},"abstract":[{"lang":"ger","text":"\"Historische Gebäude - energieeffi zient, schadenfrei und anspruchsvoll gestaltet\" lautet das Thema des Detmolder Bauphysiktages 2018. Diesen Anspruch untermauern kompetente Referenten,\r\ndie über aktuelle Themen aus den Bereichen des Wärme-, Feuchte- und Klimaschutzes, der Bauakustik, der Integralen Quartiersplanung sowie über relevante Messverfahren in der Bausanierung berichten. Energieeinsparung und Klimaschutz durch Energetische Sanierung im Gebäudebestand sind im beträchtlichen Maße auch unter Einbeziehung der architektonischen Besonderheiten möglich, wenn mit Fachwissen, dem Einsatz moderner Ingenieurmethoden und Augenmaß vorgegangen wird. Im vorliegenden Band sind die im Tagungsprogramm enthaltenen Vorträge, erweitert um zusätzliche Berichte aus dem Lehrgebiet, zusammengeführt.\r\n"}],"conference":{"location":"Detmold","name":"Detmolder Bauphysiktag 2018","end_date":"2020-02-15","start_date":"2018-02-15"},"department":[{"_id":"DEP1022"},{"_id":"DEP6020"}],"year":2018,"status":"public","type":"conference_editor","date_created":"2020-11-27T11:37:51Z","editor":[{"full_name":"Schwickert, Susanne","first_name":"Susanne","id":"27269","last_name":"Schwickert"}],"date_updated":"2023-03-15T13:49:50Z","user_id":"68554","_id":"4116","language":[{"iso":"ger"}],"place":"Lemgo"},{"publisher":"Springer","department":[{"_id":"DEP5023"}],"abstract":[{"lang":"ger","text":"Im Folgenden werden die Pilotprojekte des ReSerW-Projekts vorgestellt. Diese Pilotprojekte sollen die Fähigkeit der in den Querschnittsprojekten (siehe Abb. 4.1) erarbeiteten Methoden nachweisen und die Industrietauglichkeit der Lösungen sicherstellen. Aus diesem Grund fließen die Ergebnisse jedes einzelnen Querschnittsprojekts in die vier Pilotprojekte ein."}],"publication_status":"published","series_title":"Intelligente Technische Systeme – Lösungen aus dem Spitzencluster it’s OWL","place":"Berlin","doi":"10.1007/978-3-662-56390-8_4","_id":"4178","user_id":"15514","type":"book_chapter","page":"105-158","status":"public","author":[{"first_name":"Mathias","last_name":"Wöhler","full_name":"Wöhler, Mathias"},{"full_name":"Blum, Alexandra","first_name":"Alexandra","last_name":"Blum"},{"last_name":"Bringewatt","first_name":"Wilhelm","full_name":"Bringewatt, Wilhelm"},{"last_name":"Büttner","first_name":"Sebastian","full_name":"Büttner, Sebastian","id":"61868"},{"full_name":"Dellnitz, Michael","last_name":"Dellnitz","first_name":"Michael"},{"full_name":"Gräler, Manuel","first_name":"Manuel","last_name":"Gräler"},{"last_name":"Just","first_name":"Viktor","id":"75855","full_name":"Just, Viktor"},{"last_name":"Kummert","first_name":"Franz","full_name":"Kummert, Franz"},{"full_name":"Mucha, Henrik","last_name":"Mucha","first_name":"Henrik","id":"64896"},{"last_name":"Peitz","full_name":"Peitz, Sebastian","first_name":"Sebastian"},{"id":"61525","full_name":"Röcker, Carsten","last_name":"Röcker","first_name":"Carsten"},{"last_name":"Sielermann","first_name":"Jürgen","full_name":"Sielermann, Jürgen"},{"first_name":"Christian","full_name":"Tschirner, Christian","last_name":"Tschirner"},{"first_name":"Jens","full_name":"Wittrowski, Jens","last_name":"Wittrowski"}],"main_file_link":[{"url":"https://link.springer.com/chapter/10.1007/978-3-662-56390-8_4","open_access":"1"}],"year":2018,"citation":{"short":"M. Wöhler, A. Blum, W. Bringewatt, S. Büttner, M. Dellnitz, M. Gräler, V. Just, F. Kummert, H. Mucha, S. Peitz, C. Röcker, J. Sielermann, C. Tschirner, J. Wittrowski, in: A. Trächtler (Ed.), Ressourceneffiziente Selbstoptimierende Wäscherei, Springer, Berlin, 2018, pp. 105–158.","din1505-2-1":"Wöhler, Mathias ; Blum, Alexandra ; Bringewatt, Wilhelm ; Büttner, Sebastian ; Dellnitz, Michael ; Gräler, Manuel ; Just, Viktor ; Kummert, Franz ; u. a.: Pilotprojekte. In: Trächtler, A. (Hrsg.): Ressourceneffiziente Selbstoptimierende Wäscherei, Intelligente Technische Systeme – Lösungen aus dem Spitzencluster it’s OWL. Berlin : Springer, 2018, S. 105–158","chicago-de":"Wöhler, Mathias, Alexandra Blum, Wilhelm Bringewatt, Sebastian Büttner, Michael Dellnitz, Manuel Gräler, Viktor Just, u. a. 2018. Pilotprojekte. In: Ressourceneffiziente Selbstoptimierende Wäscherei, hg. von Ansgar Trächtler, 105–158. Intelligente Technische Systeme – Lösungen aus dem Spitzencluster it’s OWL. Berlin: Springer. doi:10.1007/978-3-662-56390-8_4, .","apa":"Wöhler, M., Blum, A., Bringewatt, W., Büttner, S., Dellnitz, M., Gräler, M., … Wittrowski, J. (2018). Pilotprojekte. In A. Trächtler (Ed.), Ressourceneffiziente Selbstoptimierende Wäscherei (pp. 105–158). Berlin: Springer. https://doi.org/10.1007/978-3-662-56390-8_4","chicago":"Wöhler, Mathias, Alexandra Blum, Wilhelm Bringewatt, Sebastian Büttner, Michael Dellnitz, Manuel Gräler, Viktor Just, et al. “Pilotprojekte.” In Ressourceneffiziente Selbstoptimierende Wäscherei, edited by Ansgar Trächtler, 105–58. Intelligente Technische Systeme – Lösungen aus dem Spitzencluster it’s OWL. Berlin: Springer, 2018. https://doi.org/10.1007/978-3-662-56390-8_4.","van":"Wöhler M, Blum A, Bringewatt W, Büttner S, Dellnitz M, Gräler M, et al. Pilotprojekte. In: Trächtler A, editor. Ressourceneffiziente Selbstoptimierende Wäscherei. Berlin: Springer; 2018. p. 105–58. (Intelligente Technische Systeme – Lösungen aus dem Spitzencluster it’s OWL).","ufg":"Wöhler, Mathias et. al. (2018): Pilotprojekte, in: Ansgar Trächtler (Hg.): Ressourceneffiziente Selbstoptimierende Wäscherei (=Intelligente Technische Systeme – Lösungen aus dem Spitzencluster it’s OWL), Berlin, S. 105–158.","havard":"M. Wöhler, A. Blum, W. Bringewatt, S. Büttner, M. Dellnitz, M. Gräler, V. Just, F. Kummert, H. Mucha, S. Peitz, C. Röcker, J. Sielermann, C. Tschirner, J. Wittrowski, Pilotprojekte, in: A. Trächtler (Ed.), Ressourceneffiziente Selbstoptimierende Wäscherei, Springer, Berlin, 2018: pp. 105–158.","bjps":"Wöhler M et al. (2018) Pilotprojekte. In Trächtler A (ed.), Ressourceneffiziente Selbstoptimierende Wäscherei. Berlin: Springer, pp. 105–158.","mla":"Wöhler, Mathias, et al. “Pilotprojekte.” Ressourceneffiziente Selbstoptimierende Wäscherei, edited by Ansgar Trächtler, Springer, 2018, pp. 105–58, doi:10.1007/978-3-662-56390-8_4.","ieee":"M. Wöhler et al., “Pilotprojekte,” in Ressourceneffiziente Selbstoptimierende Wäscherei, A. Trächtler, Ed. Berlin: Springer, 2018, pp. 105–158.","ama":"Wöhler M, Blum A, Bringewatt W, et al. Pilotprojekte. In: Trächtler A, ed. Ressourceneffiziente Selbstoptimierende Wäscherei. Intelligente Technische Systeme – Lösungen aus dem Spitzencluster it’s OWL. Berlin: Springer; 2018:105-158. doi:10.1007/978-3-662-56390-8_4"},"title":"Pilotprojekte","language":[{"iso":"ger"}],"oa":"1","date_updated":"2023-03-15T13:49:50Z","editor":[{"first_name":"Ansgar","last_name":"Trächtler","full_name":"Trächtler, Ansgar"}],"date_created":"2020-12-04T15:04:07Z","publication":" Ressourceneffiziente Selbstoptimierende Wäscherei","publication_identifier":{"issn":["2523-3637"],"eisbn":["978-3-662-56390-8"],"isbn":["978-3-662-56389-2"]}},{"title":"Eingesetzte wissenschaftliche Methoden","series_title":"Intelligente Technische Systeme – Lösungen aus dem Spitzencluster it’s OWL","citation":{"chicago":"Kummert, Franz, Alexander A. Albers , Christian Bremer, Sebastian Büttner, Michael Dellnitz, Roman Dumitrescu, Manuel Gräler, et al. “Eingesetzte wissenschaftliche Methoden.” In Ressourceneffiziente Selbstoptimierende Wäscherei, edited by Ansgar Trächtler, 41–104. Intelligente Technische Systeme – Lösungen aus dem Spitzencluster it’s OWL. Berlin: Springer, 2018.","apa":"Kummert, F., Albers , A. A., Bremer, C., Büttner, S., Dellnitz, M., Dumitrescu, R., … Wittrowski, J. (2018). Eingesetzte wissenschaftliche Methoden. In A. Trächtler (Ed.), Ressourceneffiziente Selbstoptimierende Wäscherei (pp. 41–104). Berlin: Springer.","ufg":"Kummert, Franz et. al. (2018): Eingesetzte wissenschaftliche Methoden, in: Ansgar Trächtler (Hg.): Ressourceneffiziente Selbstoptimierende Wäscherei (=Intelligente Technische Systeme – Lösungen aus dem Spitzencluster it’s OWL), Berlin, S. 41–104.","havard":"F. Kummert, A.A. Albers , C. Bremer, S. Büttner, M. Dellnitz, R. Dumitrescu, M. Gräler, V. Just, H. Mucha, S. Peitz, C. Röcker, A. Trächtler, C. Tschirner, S. Wang, J. Wittrowski, Eingesetzte wissenschaftliche Methoden, in: A. Trächtler (Ed.), Ressourceneffiziente Selbstoptimierende Wäscherei, Springer, Berlin, 2018: pp. 41–104.","bjps":"Kummert F et al. (2018) Eingesetzte wissenschaftliche Methoden. In Trächtler A (ed.), Ressourceneffiziente Selbstoptimierende Wäscherei. Berlin: Springer, pp. 41–104.","mla":"Kummert, Franz, et al. “Eingesetzte wissenschaftliche Methoden.” Ressourceneffiziente Selbstoptimierende Wäscherei, edited by Ansgar Trächtler, Springer, 2018, pp. 41–104.","van":"Kummert F, Albers AA, Bremer C, Büttner S, Dellnitz M, Dumitrescu R, et al. Eingesetzte wissenschaftliche Methoden. In: Trächtler A, editor. Ressourceneffiziente Selbstoptimierende Wäscherei. Berlin: Springer; 2018. p. 41–104. (Intelligente Technische Systeme – Lösungen aus dem Spitzencluster it’s OWL).","din1505-2-1":"Kummert, Franz ; Albers , Alexander A. ; Bremer, Christian ; Büttner, Sebastian ; Dellnitz, Michael ; Dumitrescu, Roman ; Gräler, Manuel ; Just, Viktor ; u. a.: Eingesetzte wissenschaftliche Methoden. In: Trächtler, A. (Hrsg.): Ressourceneffiziente Selbstoptimierende Wäscherei, Intelligente Technische Systeme – Lösungen aus dem Spitzencluster it’s OWL. Berlin : Springer, 2018, S. 41–104","chicago-de":"Kummert, Franz, Alexander A. Albers , Christian Bremer, Sebastian Büttner, Michael Dellnitz, Roman Dumitrescu, Manuel Gräler, u. a. 2018. Eingesetzte wissenschaftliche Methoden. In: Ressourceneffiziente Selbstoptimierende Wäscherei, hg. von Ansgar Trächtler, 41–104. Intelligente Technische Systeme – Lösungen aus dem Spitzencluster it’s OWL. Berlin: Springer.","short":"F. Kummert, A.A. Albers , C. Bremer, S. Büttner, M. Dellnitz, R. Dumitrescu, M. Gräler, V. Just, H. Mucha, S. Peitz, C. Röcker, A. Trächtler, C. Tschirner, S. Wang, J. Wittrowski, in: A. Trächtler (Ed.), Ressourceneffiziente Selbstoptimierende Wäscherei, Springer, Berlin, 2018, pp. 41–104.","ieee":"F. Kummert et al., “Eingesetzte wissenschaftliche Methoden,” in Ressourceneffiziente Selbstoptimierende Wäscherei, A. Trächtler, Ed. Berlin: Springer, 2018, pp. 41–104.","ama":"Kummert F, Albers AA, Bremer C, et al. Eingesetzte wissenschaftliche Methoden. In: Trächtler A, ed. Ressourceneffiziente Selbstoptimierende Wäscherei. Intelligente Technische Systeme – Lösungen aus dem Spitzencluster it’s OWL. Berlin: Springer; 2018:41-104."},"publication_status":"published","abstract":[{"text":"Für die Weiterentwicklung der klassischen Wäschereitechnik zu intelligenten technischen Systemen ist ein strukturiertes Vorgehen unerlässlich. In dem Projekt wurden wissenschaftliche Methoden genutzt und auf die Wäschereitechnik adaptiert, um das Ziel einer ressourcenschonenden Wäscherei zu erreichen. Neben der modellbasierten Entwurfstechnik für intelligente Systeme wurden ebenfalls Methoden für die Bildverarbeitung, mathematische Optimierung und Usability von Maschinen in dem Projekt verwendet. Diese werden in den folgenden Abschnitten näher vorgestellt.","lang":"ger"}],"year":2018,"author":[{"last_name":"Kummert","first_name":"Franz","full_name":"Kummert, Franz"},{"first_name":"Alexander A.","full_name":"Albers , Alexander A.","last_name":"Albers "},{"full_name":"Bremer, Christian","last_name":"Bremer","first_name":"Christian"},{"first_name":"Sebastian","id":"61868","full_name":"Büttner, Sebastian","last_name":"Büttner"},{"first_name":"Michael","full_name":"Dellnitz, Michael","last_name":"Dellnitz"},{"first_name":"Roman","last_name":"Dumitrescu","full_name":"Dumitrescu, Roman"},{"first_name":"Manuel","last_name":"Gräler","full_name":"Gräler, Manuel"},{"last_name":"Just","full_name":"Just, Viktor","first_name":"Viktor","id":"75855"},{"last_name":"Mucha","first_name":"Henrik","full_name":"Mucha, Henrik","id":"64896"},{"full_name":"Peitz, Sebastian","last_name":"Peitz","first_name":"Sebastian"},{"first_name":"Carsten","id":"61525","last_name":"Röcker","full_name":"Röcker, Carsten"},{"last_name":"Trächtler","first_name":"Ansgar","full_name":"Trächtler, Ansgar"},{"first_name":"Christian","last_name":"Tschirner","full_name":"Tschirner, Christian"},{"first_name":"Shuo","full_name":"Wang, Shuo","last_name":"Wang"},{"first_name":"Jens","last_name":"Wittrowski","full_name":"Wittrowski, Jens"}],"main_file_link":[{"url":"https://doi.org/10.1007/978-3-662-56390-8_3","open_access":"1"}],"department":[{"_id":"DEP5023"}],"publisher":"Springer","status":"public","page":"41-104","publication":"Ressourceneffiziente Selbstoptimierende Wäscherei","publication_identifier":{"isbn":["978-3-662-56389-2"],"issn":["2523-3637"],"eisbn":["978-3-662-56390-8"]},"type":"book_chapter","date_created":"2020-12-04T15:04:08Z","editor":[{"last_name":"Trächtler","full_name":"Trächtler, Ansgar","first_name":"Ansgar"}],"user_id":"15514","date_updated":"2023-03-15T13:49:50Z","oa":"1","_id":"4179","place":"Berlin","language":[{"iso":"ger"}]},{"publisher":"Gesellschaft für Informatik e.V.","status":"public","abstract":[{"text":"In this paper we give an overview of features and use cases that Intelligent Adaptive Assistance Systems (IAAS) in the literature commonly provide. For this, a literature research has been executed where 29 papers were selected for inspection. In the course of this inspection, most common features are noted, compared and assessed against the definitions we gave for an IAAS. It showed that the development of IAAS can benefit from an intensified research in cooperation with machine learning experts to further develop the intelligence and adaptivity of future IAAS.","lang":"eng"}],"author":[{"first_name":"Andreas","full_name":"Besginow, Andreas","last_name":"Besginow","id":"61743"},{"last_name":"Büttner","first_name":"Sebastian","id":"61868","full_name":"Büttner, Sebastian"},{"last_name":"Röcker","first_name":"Carsten","full_name":"Röcker, Carsten","id":"61525"}],"main_file_link":[{"url":"https://dl.gi.de/bitstream/handle/20.500.12116/16829/Beitrag_533_final__a.pdf?sequence=1&isAllowed=y","open_access":"1"}],"year":2018,"conference":{"name":"Mensch und Computer 2018","location":"Dresden","start_date":"2018-09-02","end_date":"2018-09-05"},"department":[{"_id":"DEP5023"}],"citation":{"short":"A. Besginow, S. Büttner, C. Röcker, in: 5. Workshop Zu Smart Factories: Mitarbeiter-Zentrierte Informationssysteme Für Die Zusammenarbeit Der Zukunft, Mensch Und Computer 2018, Gesellschaft für Informatik e.V., Bonn, 2018.","chicago-de":"Besginow, Andreas, Sebastian Büttner und Carsten Röcker. 2018. Intelligent Adaptive Assistance Systems in an Industrial Context – Overview of Use Cases and Features. In: 5. Workshop zu Smart Factories: Mitarbeiter-zentrierte Informationssysteme für die Zusammenarbeit der Zukunft, Mensch und Computer 2018. Bonn: Gesellschaft für Informatik e.V. doi:10.18420/muc2018-ws18-0533, .","din1505-2-1":"Besginow, Andreas ; Büttner, Sebastian ; Röcker, Carsten: Intelligent Adaptive Assistance Systems in an Industrial Context – Overview of Use Cases and Features. In: 5. Workshop zu Smart Factories: Mitarbeiter-zentrierte Informationssysteme für die Zusammenarbeit der Zukunft, Mensch und Computer 2018. Bonn : Gesellschaft für Informatik e.V., 2018","ama":"Besginow A, Büttner S, Röcker C. Intelligent Adaptive Assistance Systems in an Industrial Context – Overview of Use Cases and Features. In: 5. Workshop Zu Smart Factories: Mitarbeiter-Zentrierte Informationssysteme Für Die Zusammenarbeit Der Zukunft, Mensch Und Computer 2018. Bonn: Gesellschaft für Informatik e.V.; 2018. doi:10.18420/muc2018-ws18-0533","van":"Besginow A, Büttner S, Röcker C. Intelligent Adaptive Assistance Systems in an Industrial Context – Overview of Use Cases and Features. In: 5 Workshop zu Smart Factories: Mitarbeiter-zentrierte Informationssysteme für die Zusammenarbeit der Zukunft, Mensch und Computer 2018. Bonn: Gesellschaft für Informatik e.V.; 2018.","havard":"A. Besginow, S. Büttner, C. Röcker, Intelligent Adaptive Assistance Systems in an Industrial Context – Overview of Use Cases and Features, in: 5. Workshop Zu Smart Factories: Mitarbeiter-Zentrierte Informationssysteme Für Die Zusammenarbeit Der Zukunft, Mensch Und Computer 2018, Gesellschaft für Informatik e.V., Bonn, 2018.","bjps":"Besginow A, Büttner S and Röcker C (2018) Intelligent Adaptive Assistance Systems in an Industrial Context – Overview of Use Cases and Features. 5. Workshop Zu Smart Factories: Mitarbeiter-Zentrierte Informationssysteme Für Die Zusammenarbeit Der Zukunft, Mensch Und Computer 2018. Bonn: Gesellschaft für Informatik e.V.","mla":"Besginow, Andreas, et al. “Intelligent Adaptive Assistance Systems in an Industrial Context – Overview of Use Cases and Features.” 5. Workshop Zu Smart Factories: Mitarbeiter-Zentrierte Informationssysteme Für Die Zusammenarbeit Der Zukunft, Mensch Und Computer 2018, Gesellschaft für Informatik e.V., 2018, doi:10.18420/muc2018-ws18-0533.","ufg":"Besginow, Andreas et. al. (2018): Intelligent Adaptive Assistance Systems in an Industrial Context – Overview of Use Cases and Features, in: 5. Workshop zu Smart Factories: Mitarbeiter-zentrierte Informationssysteme für die Zusammenarbeit der Zukunft, Mensch und Computer 2018, Bonn.","ieee":"A. Besginow, S. Büttner, and C. Röcker, “Intelligent Adaptive Assistance Systems in an Industrial Context – Overview of Use Cases and Features,” in 5. Workshop zu Smart Factories: Mitarbeiter-zentrierte Informationssysteme für die Zusammenarbeit der Zukunft, Mensch und Computer 2018, Dresden, 2018.","apa":"Besginow, A., Büttner, S., & Röcker, C. (2018). Intelligent Adaptive Assistance Systems in an Industrial Context – Overview of Use Cases and Features. In 5. Workshop zu Smart Factories: Mitarbeiter-zentrierte Informationssysteme für die Zusammenarbeit der Zukunft, Mensch und Computer 2018. Bonn: Gesellschaft für Informatik e.V. https://doi.org/10.18420/muc2018-ws18-0533","chicago":"Besginow, Andreas, Sebastian Büttner, and Carsten Röcker. “Intelligent Adaptive Assistance Systems in an Industrial Context – Overview of Use Cases and Features.” In 5. Workshop Zu Smart Factories: Mitarbeiter-Zentrierte Informationssysteme Für Die Zusammenarbeit Der Zukunft, Mensch Und Computer 2018. Bonn: Gesellschaft für Informatik e.V., 2018. https://doi.org/10.18420/muc2018-ws18-0533."},"publication_status":"published","title":"Intelligent Adaptive Assistance Systems in an Industrial Context – Overview of Use Cases and Features","_id":"4180","doi":"10.18420/muc2018-ws18-0533","place":"Bonn","language":[{"iso":"eng"}],"oa":"1","user_id":"15514","date_updated":"2023-03-15T13:49:50Z","publication":"5. Workshop zu Smart Factories: Mitarbeiter-zentrierte Informationssysteme für die Zusammenarbeit der Zukunft, Mensch und Computer 2018","type":"conference","date_created":"2020-12-04T15:04:10Z"},{"oa":"1","doi":"10.18420/muc2018-ws07-0364","_id":"4181","language":[{"iso":"eng"}],"place":"Bonn","type":"conference","date_created":"2020-12-04T15:04:11Z","publication":"Workshop on Virtual and Augmented Reality in Everyday Context (VARECo), Mensch und Computer 2018","date_updated":"2023-03-15T13:49:51Z","user_id":"15514","abstract":[{"lang":"eng","text":"Projection-based Augmented Reality (AR) might change the interactions with digital systems in future work environments. A lot of stationary projection-based AR assistive systems have been presented that might support future work processes. However, not much research has been done beyond stationary settings. With moving towards mobile settings, fast and robust object recognition algorithms are required that allow real-time tracking of physical objects as targets for the projected digital overlay. With this work, we present a portable projection-based AR platform that recognizes objects in real time and overlays physical objects with in-situ projections of digital content. We consider our system as a precursor to a future mobile projection-based assistive system. By presenting the system, we want to start a discussion in the HCI community about the potential of mobile projection-based AR in future work environments."}],"conference":{"name":"Mensch und Computer 2018","location":"Dresden","start_date":"2018-09-02","end_date":"2018-09-05"},"department":[{"_id":"DEP5023"}],"year":2018,"author":[{"last_name":"Büttner","first_name":"Sebastian","full_name":"Büttner, Sebastian","id":"61868"},{"full_name":"Besginow, Andreas","last_name":"Besginow","first_name":"Andreas","id":"61743"},{"first_name":"Michael","last_name":"Prilla","full_name":"Prilla, Michael"},{"id":"61525","last_name":"Röcker","first_name":"Carsten","full_name":"Röcker, Carsten"}],"main_file_link":[{"open_access":"1","url":"https://dl.gi.de/bitstream/handle/20.500.12116/16892/Beitrag_364_final__a.pdf?sequence=1&isAllowed=y"}],"publisher":"Gesellschaft für Informatik e.V.","status":"public","title":"Mobile Projection-based Augmented Reality in Work Environments – an Exploratory Approach","publication_status":"published","citation":{"chicago-de":"Büttner, Sebastian, Andreas Besginow, Michael Prilla und Carsten Röcker. 2018. Mobile Projection-based Augmented Reality in Work Environments – an Exploratory Approach. In: Workshop on Virtual and Augmented Reality in Everyday Context (VARECo), Mensch und Computer 2018. Bonn: Gesellschaft für Informatik e.V. doi:10.18420/muc2018-ws07-0364, .","din1505-2-1":"Büttner, Sebastian ; Besginow, Andreas ; Prilla, Michael ; Röcker, Carsten: Mobile Projection-based Augmented Reality in Work Environments – an Exploratory Approach. In: Workshop on Virtual and Augmented Reality in Everyday Context (VARECo), Mensch und Computer 2018. Bonn : Gesellschaft für Informatik e.V., 2018","short":"S. Büttner, A. Besginow, M. Prilla, C. Röcker, in: Workshop on Virtual and Augmented Reality in Everyday Context (VARECo), Mensch Und Computer 2018, Gesellschaft für Informatik e.V., Bonn, 2018.","mla":"Büttner, Sebastian, et al. “Mobile Projection-Based Augmented Reality in Work Environments – an Exploratory Approach.” Workshop on Virtual and Augmented Reality in Everyday Context (VARECo), Mensch Und Computer 2018, Gesellschaft für Informatik e.V., 2018, doi:10.18420/muc2018-ws07-0364.","havard":"S. Büttner, A. Besginow, M. Prilla, C. Röcker, Mobile Projection-based Augmented Reality in Work Environments – an Exploratory Approach, in: Workshop on Virtual and Augmented Reality in Everyday Context (VARECo), Mensch Und Computer 2018, Gesellschaft für Informatik e.V., Bonn, 2018.","bjps":"Büttner S et al. (2018) Mobile Projection-Based Augmented Reality in Work Environments – an Exploratory Approach. Workshop on Virtual and Augmented Reality in Everyday Context (VARECo), Mensch Und Computer 2018. Bonn: Gesellschaft für Informatik e.V.","ufg":"Büttner, Sebastian et. al. (2018): Mobile Projection-based Augmented Reality in Work Environments – an Exploratory Approach, in: Workshop on Virtual and Augmented Reality in Everyday Context (VARECo), Mensch und Computer 2018, Bonn.","ama":"Büttner S, Besginow A, Prilla M, Röcker C. Mobile Projection-based Augmented Reality in Work Environments – an Exploratory Approach. In: Workshop on Virtual and Augmented Reality in Everyday Context (VARECo), Mensch Und Computer 2018. Bonn: Gesellschaft für Informatik e.V.; 2018. doi:10.18420/muc2018-ws07-0364","van":"Büttner S, Besginow A, Prilla M, Röcker C. Mobile Projection-based Augmented Reality in Work Environments – an Exploratory Approach. In: Workshop on Virtual and Augmented Reality in Everyday Context (VARECo), Mensch und Computer 2018. Bonn: Gesellschaft für Informatik e.V.; 2018.","chicago":"Büttner, Sebastian, Andreas Besginow, Michael Prilla, and Carsten Röcker. “Mobile Projection-Based Augmented Reality in Work Environments – an Exploratory Approach.” In Workshop on Virtual and Augmented Reality in Everyday Context (VARECo), Mensch Und Computer 2018. Bonn: Gesellschaft für Informatik e.V., 2018. https://doi.org/10.18420/muc2018-ws07-0364.","ieee":"S. Büttner, A. Besginow, M. Prilla, and C. Röcker, “Mobile Projection-based Augmented Reality in Work Environments – an Exploratory Approach,” in Workshop on Virtual and Augmented Reality in Everyday Context (VARECo), Mensch und Computer 2018, Dresden, 2018.","apa":"Büttner, S., Besginow, A., Prilla, M., & Röcker, C. (2018). Mobile Projection-based Augmented Reality in Work Environments – an Exploratory Approach. In Workshop on Virtual and Augmented Reality in Everyday Context (VARECo), Mensch und Computer 2018. Bonn: Gesellschaft für Informatik e.V. https://doi.org/10.18420/muc2018-ws07-0364"}},{"language":[{"iso":"eng"}],"keyword":["Indoor localization","Intelligent user interface","Process planning"],"oa":"1","date_updated":"2025-04-11T09:05:35Z","editor":[{"first_name":"Norbert","last_name":"Streitz","full_name":"Streitz, Norbert"},{"full_name":"Konomi, Shin’ichi","first_name":"Shin’ichi","last_name":"Konomi"}],"date_created":"2020-12-04T15:04:14Z","publication_identifier":{"isbn":["978-3-319-91130-4"],"eisbn":["978-3-319-91131-1"]},"publication":"Distributed, Ambient and Pervasive Interactions: Understanding Humans: 6th International Conference, DAPI 2018, Held as Part of HCI International 2018, Las Vegas, NV, USA, July 15–20, 2018, Proceedings, Part I ","page":"3-47","status":"public","author":[{"full_name":"Heinz, Mario","first_name":"Mario","last_name":"Heinz","id":"68913"},{"last_name":"Büttner","first_name":"Sebastian","full_name":"Büttner, Sebastian","id":"61868"},{"full_name":"Wegerich, Martin","last_name":"Wegerich","first_name":"Martin"},{"first_name":"Frank","id":"62029","full_name":"Marek, Frank","last_name":"Marek"},{"first_name":"Carsten","full_name":"Röcker, Carsten","last_name":"Röcker","id":"61525"}],"main_file_link":[{"open_access":"1","url":"https://link.springer.com/content/pdf/10.1007%2F978-3-319-91131-1_3.pdf"}],"year":"2018","volume":10921,"citation":{"din1505-2-1":"Heinz, Mario ; Büttner, Sebastian ; Wegerich, Martin ; Marek, Frank ; Röcker, Carsten: A Multi-level Localization System for Intelligent User Interfaces. In: Streitz, N. ; Konomi, S. (Hrsg.): Distributed, Ambient and Pervasive Interactions: Understanding Humans: 6th International Conference, DAPI 2018, Held as Part of HCI International 2018, Las Vegas, NV, USA, July 15–20, 2018, Proceedings, Part I , Lecture Notes in Computer Science. Bd. 10921. Cham : Springer, 2018, S. 3–47","chicago-de":"Heinz, Mario, Sebastian Büttner, Martin Wegerich, Frank Marek und Carsten Röcker. 2018. A Multi-level Localization System for Intelligent User Interfaces. In: Distributed, Ambient and Pervasive Interactions: Understanding Humans: 6th International Conference, DAPI 2018, Held as Part of HCI International 2018, Las Vegas, NV, USA, July 15–20, 2018, Proceedings, Part I , hg. von Norbert Streitz und Shin’ichi Konomi, 10921:3–47. Lecture Notes in Computer Science. Cham: Springer. doi:10.1007/978-3-319-91131-1_3, .","short":"M. Heinz, S. Büttner, M. Wegerich, F. Marek, C. Röcker, in: N. Streitz, S. Konomi (Eds.), Distributed, Ambient and Pervasive Interactions: Understanding Humans: 6th International Conference, DAPI 2018, Held as Part of HCI International 2018, Las Vegas, NV, USA, July 15–20, 2018, Proceedings, Part I , Springer, Cham, 2018, pp. 3–47.","chicago":"Heinz, Mario, Sebastian Büttner, Martin Wegerich, Frank Marek, and Carsten Röcker. “A Multi-Level Localization System for Intelligent User Interfaces.” In Distributed, Ambient and Pervasive Interactions: Understanding Humans: 6th International Conference, DAPI 2018, Held as Part of HCI International 2018, Las Vegas, NV, USA, July 15–20, 2018, Proceedings, Part I , edited by Norbert Streitz and Shin’ichi Konomi, 10921:3–47. Lecture Notes in Computer Science. Cham: Springer, 2018. https://doi.org/10.1007/978-3-319-91131-1_3.","apa":"Heinz, M., Büttner, S., Wegerich, M., Marek, F., & Röcker, C. (2018). A Multi-level Localization System for Intelligent User Interfaces. In N. Streitz & S. Konomi (Eds.), Distributed, Ambient and Pervasive Interactions: Understanding Humans: 6th International Conference, DAPI 2018, Held as Part of HCI International 2018, Las Vegas, NV, USA, July 15–20, 2018, Proceedings, Part I (Vol. 10921, pp. 3–47). Springer. https://doi.org/10.1007/978-3-319-91131-1_3","mla":"Heinz, Mario, et al. “A Multi-Level Localization System for Intelligent User Interfaces.” Distributed, Ambient and Pervasive Interactions: Understanding Humans: 6th International Conference, DAPI 2018, Held as Part of HCI International 2018, Las Vegas, NV, USA, July 15–20, 2018, Proceedings, Part I , edited by Norbert Streitz and Shin’ichi Konomi, vol. 10921, Springer, 2018, pp. 3–47, https://doi.org/10.1007/978-3-319-91131-1_3.","havard":"M. Heinz, S. Büttner, M. Wegerich, F. Marek, C. Röcker, A Multi-level Localization System for Intelligent User Interfaces, in: N. Streitz, S. Konomi (Eds.), Distributed, Ambient and Pervasive Interactions: Understanding Humans: 6th International Conference, DAPI 2018, Held as Part of HCI International 2018, Las Vegas, NV, USA, July 15–20, 2018, Proceedings, Part I , Springer, Cham, 2018: pp. 3–47.","bjps":"Heinz M et al. (2018) A Multi-Level Localization System for Intelligent User Interfaces. In Streitz N and Konomi S (eds), Distributed, Ambient and Pervasive Interactions: Understanding Humans: 6th International Conference, DAPI 2018, Held as Part of HCI International 2018, Las Vegas, NV, USA, July 15–20, 2018, Proceedings, Part I , vol. 10921. Cham: Springer, pp. 3–47.","ufg":"Heinz, Mario u. a.: A Multi-level Localization System for Intelligent User Interfaces, in: Streitz, Norbert/Konomi, Shin’ichi (Hgg.): Distributed, Ambient and Pervasive Interactions: Understanding Humans: 6th International Conference, DAPI 2018, Held as Part of HCI International 2018, Las Vegas, NV, USA, July 15–20, 2018, Proceedings, Part I , Bd. 10921, Cham 2018 (Lecture Notes in Computer Science), S. 3–47.","van":"Heinz M, Büttner S, Wegerich M, Marek F, Röcker C. A Multi-level Localization System for Intelligent User Interfaces. In: Streitz N, Konomi S, editors. Distributed, Ambient and Pervasive Interactions: Understanding Humans: 6th International Conference, DAPI 2018, Held as Part of HCI International 2018, Las Vegas, NV, USA, July 15–20, 2018, Proceedings, Part I . Cham: Springer; 2018. p. 3–47. (Lecture Notes in Computer Science; vol. 10921).","ieee":"M. Heinz, S. Büttner, M. Wegerich, F. Marek, and C. Röcker, “A Multi-level Localization System for Intelligent User Interfaces,” in Distributed, Ambient and Pervasive Interactions: Understanding Humans: 6th International Conference, DAPI 2018, Held as Part of HCI International 2018, Las Vegas, NV, USA, July 15–20, 2018, Proceedings, Part I , vol. 10921, N. Streitz and S. Konomi, Eds. Cham: Springer, 2018, pp. 3–47. doi: 10.1007/978-3-319-91131-1_3.","ama":"Heinz M, Büttner S, Wegerich M, Marek F, Röcker C. A Multi-level Localization System for Intelligent User Interfaces. In: Streitz N, Konomi S, eds. Distributed, Ambient and Pervasive Interactions: Understanding Humans: 6th International Conference, DAPI 2018, Held as Part of HCI International 2018, Las Vegas, NV, USA, July 15–20, 2018, Proceedings, Part I . Vol 10921. Lecture Notes in Computer Science. Springer; 2018:3-47. doi:10.1007/978-3-319-91131-1_3"},"title":"A Multi-level Localization System for Intelligent User Interfaces","place":"Cham","doi":"10.1007/978-3-319-91131-1_3","_id":"4183","user_id":"83781","intvolume":" 10921","type":"book_chapter","publisher":"Springer","conference":{"end_date":"2018-07-20","start_date":"2018-07-15","name":"6th International Conference, DAPI 2018, Held as Part of HCI International 2018","location":"Las Vegas, NV, USA"},"department":[{"_id":"DEP5023"}],"abstract":[{"text":"The localization of employees in the industrial environment plays a major role in the development of future intelligent user interfaces and systems. Yet, localizing people also raises ethical, legal and social issues. While a precise localization is essential for context-aware systems and real-time optimization of processes, a permanently high localization accuracy creates opportunities for surveillance and therefore has a negative impact on workplace privacy. In this paper, we propose a new concept of a multi-level localization system which tries to find a way to meet both the technical requirements for a localization with a high accuracy as well as the interests of employees in terms of privacy. Depending on the users’ location, different localization technologies are used, that restrict the accuracy to the least required level by design. Furthermore, we present a prototypical implementation of the concept that shows the feasibility of our multi-level localization concept. Using this system, intelligent systems become able to react on employees based on their location without permanently monitoring the precise user location. ","lang":"eng"}],"publication_status":"published","series_title":"Lecture Notes in Computer Science"},{"intvolume":" 6","user_id":"15514","type":"journal_article","_id":"4316","doi":"10.3390/technologies6040120","place":"Basel","publication_status":"published","publisher":"MDPI ","issue":"120","abstract":[{"lang":"eng","text":"The manufacturing industry is increasingly being dominated by information and communication technology, leading to the development of cyber-physical systems. Most existing frameworks on the assessment of such technological advancements see the technology as a solitary system. However, research has shown that other environmental factors like organizational processes or human factors are also affected. Drawing on the sociotechnical systems approach, future technologies could be evaluated using scenarios of digitized work. These scenarios can help classify new technologies and uncover their advantages and constraints in order to provide guidance for the digital development of organizations. We developed an instrument for evaluating scenarios of digitized work on the relevant dimensions ‘technology’, ‘human’ and ‘organization’ and conducted a quantitative study applying this instrument on three different scenarios (N = 24 subject matter experts). Results show that our instrument is capable of measuring technological, human and organizational aspects of technology implementations and detecting differences in the scenarios under investigation. The instrument’s practical value is significant as it enables the user to compare and quantify scenarios and helps companies to decide which technology they should implement."}],"department":[{"_id":"DEP5023"}],"date_updated":"2023-03-15T13:49:51Z","publication":"Technologies : open access journal ","publication_identifier":{"issn":["2227-7080"]},"date_created":"2021-01-08T08:26:15Z","keyword":["digitization","change management","scenarios of digitized work","product engineering","sociotechnical systems"],"language":[{"iso":"eng"}],"oa":"1","volume":6,"citation":{"bjps":"Miekus L et al. (2018) Development of a Change Management Instrument for the Implementation of Technologies. Technologies : open access journal 6.","mla":"Miekus, Lisa, et al. “Development of a Change Management Instrument for the Implementation of Technologies.” Technologies : Open Access Journal , vol. 6, no. 120, MDPI , 2018, doi:10.3390/technologies6040120.","havard":"L. Miekus, D. Bentler, S. Jenderny, M. Foullois, L. Wöste, C. Röcker, G.W. Maier, Development of a Change Management Instrument for the Implementation of Technologies, Technologies : Open Access Journal . 6 (2018).","ufg":"Miekus, Lisa et. al. (2018): Development of a Change Management Instrument for the Implementation of Technologies, in: Technologies : open access journal 6 (120).","van":"Miekus L, Bentler D, Jenderny S, Foullois M, Wöste L, Röcker C, et al. Development of a Change Management Instrument for the Implementation of Technologies. Technologies : open access journal . 2018;6(120).","chicago":"Miekus, Lisa, Dominik Bentler, Sascha Jenderny, Marc Foullois, Lars Wöste, Carsten Röcker, and Günter W. Maier. “Development of a Change Management Instrument for the Implementation of Technologies.” Technologies : Open Access Journal 6, no. 120 (2018). https://doi.org/10.3390/technologies6040120.","apa":"Miekus, L., Bentler, D., Jenderny, S., Foullois, M., Wöste, L., Röcker, C., & Maier, G. W. (2018). Development of a Change Management Instrument for the Implementation of Technologies. Technologies : Open Access Journal , 6(120). https://doi.org/10.3390/technologies6040120","chicago-de":"Miekus, Lisa, Dominik Bentler, Sascha Jenderny, Marc Foullois, Lars Wöste, Carsten Röcker und Günter W. Maier. 2018. Development of a Change Management Instrument for the Implementation of Technologies. Technologies : open access journal 6, Nr. 120. doi:10.3390/technologies6040120, .","din1505-2-1":"Miekus, Lisa ; Bentler, Dominik ; Jenderny, Sascha ; Foullois, Marc ; Wöste, Lars ; Röcker, Carsten ; Maier, Günter W.: Development of a Change Management Instrument for the Implementation of Technologies. In: Technologies : open access journal Bd. 6. Basel, MDPI (2018), Nr. 120","short":"L. Miekus, D. Bentler, S. Jenderny, M. Foullois, L. Wöste, C. Röcker, G.W. Maier, Technologies : Open Access Journal 6 (2018).","ama":"Miekus L, Bentler D, Jenderny S, et al. Development of a Change Management Instrument for the Implementation of Technologies. Technologies : open access journal . 2018;6(120). doi:10.3390/technologies6040120","ieee":"L. Miekus et al., “Development of a Change Management Instrument for the Implementation of Technologies,” Technologies : open access journal , vol. 6, no. 120, 2018."},"title":"Development of a Change Management Instrument for the Implementation of Technologies","status":"public","main_file_link":[{"open_access":"1"}],"year":2018,"author":[{"first_name":"Lisa","last_name":"Miekus","full_name":"Miekus, Lisa"},{"first_name":"Dominik","last_name":"Bentler","full_name":"Bentler, Dominik"},{"first_name":"Sascha","last_name":"Jenderny","full_name":"Jenderny, Sascha"},{"first_name":"Marc","last_name":"Foullois","full_name":"Foullois, Marc"},{"first_name":"Lars","last_name":"Wöste","full_name":"Wöste, Lars"},{"last_name":"Röcker","first_name":"Carsten","full_name":"Röcker, Carsten","id":"61525"},{"last_name":"Maier","first_name":"Günter W.","full_name":"Maier, Günter W."}]},{"user_id":"15514","date_updated":"2023-03-15T13:49:52Z","publication":"CSCW '18: Companion of the 2018 ACM Conference on Computer Supported Cooperative Work and Social Computing","publication_identifier":{"isbn":["978-1-4503-6018-0"]},"date_created":"2021-01-08T08:26:16Z","type":"journal_article","_id":"4317","doi":"10.1145/3272973.3273009","place":"New York","keyword":["Social and professional topics","Professional topics","Computing and business","Computer supported cooperative work"],"language":[{"iso":"eng"}],"oa":"1","citation":{"chicago":"Mucha, Henrik, Carsten Röcker, Mark Ludwig, Benno Stein, Sebastian Robert, Lukas Galla, Martin Hill, Volker Wulf, and Corinna Ogonowski. “The Industrial Internet of Things: New Perspectives on HCI and CSCW within Industry Settings.” CSCW ’18: Companion of the 2018 ACM Conference on Computer Supported Cooperative Work and Social Computing, 2018, 393–400. https://doi.org/10.1145/3272973.3273009.","apa":"Mucha, H., Röcker, C., Ludwig, M., Stein, B., Robert, S., Galla, L., … Ogonowski, C. (2018). The Industrial Internet of Things: New Perspectives on HCI and CSCW within Industry Settings. CSCW ’18: Companion of the 2018 ACM Conference on Computer Supported Cooperative Work and Social Computing, 393–400. https://doi.org/10.1145/3272973.3273009","ufg":"Mucha, Henrik et. al. (2018): The Industrial Internet of Things: New Perspectives on HCI and CSCW within Industry Settings, in: CSCW ’18: Companion of the 2018 ACM Conference on Computer Supported Cooperative Work and Social Computing, S. 393–400.","mla":"Mucha, Henrik, et al. “The Industrial Internet of Things: New Perspectives on HCI and CSCW within Industry Settings.” CSCW ’18: Companion of the 2018 ACM Conference on Computer Supported Cooperative Work and Social Computing, ACM, 2018, pp. 393–400, doi:10.1145/3272973.3273009.","havard":"H. Mucha, C. Röcker, M. Ludwig, B. Stein, S. Robert, L. Galla, M. Hill, V. Wulf, C. Ogonowski, The Industrial Internet of Things: New Perspectives on HCI and CSCW within Industry Settings, CSCW ’18: Companion of the 2018 ACM Conference on Computer Supported Cooperative Work and Social Computing. (2018) 393–400.","bjps":"Mucha H et al. (2018) The Industrial Internet of Things: New Perspectives on HCI and CSCW within Industry Settings. CSCW ’18: Companion of the 2018 ACM Conference on Computer Supported Cooperative Work and Social Computing 393–400.","van":"Mucha H, Röcker C, Ludwig M, Stein B, Robert S, Galla L, et al. The Industrial Internet of Things: New Perspectives on HCI and CSCW within Industry Settings. CSCW ’18: Companion of the 2018 ACM Conference on Computer Supported Cooperative Work and Social Computing. 2018;393–400.","chicago-de":"Mucha, Henrik, Carsten Röcker, Mark Ludwig, Benno Stein, Sebastian Robert, Lukas Galla, Martin Hill, Volker Wulf und Corinna Ogonowski. 2018. The Industrial Internet of Things: New Perspectives on HCI and CSCW within Industry Settings. CSCW ’18: Companion of the 2018 ACM Conference on Computer Supported Cooperative Work and Social Computing: 393–400. doi:10.1145/3272973.3273009, .","din1505-2-1":"Mucha, Henrik ; Röcker, Carsten ; Ludwig, Mark ; Stein, Benno ; Robert, Sebastian ; Galla, Lukas ; Hill, Martin ; Wulf, Volker ; u. a.: The Industrial Internet of Things: New Perspectives on HCI and CSCW within Industry Settings. In: CSCW ’18: Companion of the 2018 ACM Conference on Computer Supported Cooperative Work and Social Computing. New York, ACM (2018), S. 393–400","short":"H. Mucha, C. Röcker, M. Ludwig, B. Stein, S. Robert, L. Galla, M. Hill, V. Wulf, C. Ogonowski, CSCW ’18: Companion of the 2018 ACM Conference on Computer Supported Cooperative Work and Social Computing (2018) 393–400.","ieee":"H. Mucha et al., “The Industrial Internet of Things: New Perspectives on HCI and CSCW within Industry Settings,” CSCW ’18: Companion of the 2018 ACM Conference on Computer Supported Cooperative Work and Social Computing, pp. 393–400, 2018.","ama":"Mucha H, Röcker C, Ludwig M, et al. The Industrial Internet of Things: New Perspectives on HCI and CSCW within Industry Settings. CSCW ’18: Companion of the 2018 ACM Conference on Computer Supported Cooperative Work and Social Computing. 2018:393–400. doi:10.1145/3272973.3273009"},"publication_status":"published","title":"The Industrial Internet of Things: New Perspectives on HCI and CSCW within Industry Settings","publisher":"ACM","status":"public","page":"393–400","abstract":[{"lang":"eng","text":"Digital products and services are commonplace in our personal lives where software and its algorithms provide assistance and amenities. However, interactive systems within industrial settings have yet to catch up with consumer products, especially with regard to the quality of interaction and user experience. With the rise of automation and data exchange on massive scales, the role of human work is challenged and the importance of cooperation emphasized. New concepts of smart factories in which machines and software are doing parts of the work tasks emerge, drastically altering the nature of work in industrial settings from manual labor to increasingly complex tasks. HCI and especially CSCW offer concepts, technical tools and methods to cope with this disruptive shift towards an Industrial Internet of Things (IIoT). Networked assistive systems, for instance, are capable of individually addressing and satisfying the diverse needs of a heterogeneous workforce. We propose this workshop to discuss new perspectives on HCI and CSCW in industrial contexts with regard to the emerging IIoT. The goal of the workshop is to explore the design space of IIoT applications, its implications on cooperative work and to formulate new research opportunities to current challenges."}],"author":[{"first_name":"Henrik","last_name":"Mucha","id":"64896","full_name":"Mucha, Henrik"},{"first_name":"Carsten","id":"61525","last_name":"Röcker","full_name":"Röcker, Carsten"},{"first_name":"Mark","full_name":"Ludwig, Mark","last_name":"Ludwig"},{"full_name":"Stein, Benno","first_name":"Benno","last_name":"Stein"},{"last_name":"Robert","full_name":"Robert, Sebastian","first_name":"Sebastian"},{"first_name":"Lukas","full_name":"Galla, Lukas","last_name":"Galla"},{"first_name":"Martin","last_name":"Hill","full_name":"Hill, Martin"},{"full_name":"Wulf, Volker","first_name":"Volker","last_name":"Wulf"},{"first_name":"Corinna","full_name":"Ogonowski, Corinna","last_name":"Ogonowski"}],"year":2018,"main_file_link":[{"open_access":"1"}],"conference":{"start_date":"2018-11-03","end_date":"2018-11-07","name":"Computer Supported Cooperative Work and Social Computing ; CSCW '18","location":"Jersey City, NJ USA"},"department":[{"_id":"DEP5023"}]},{"intvolume":" 11015","user_id":"15514","type":"conference","_id":"4318","doi":"10.1007/978-3-319-99740-7_16","place":"Cham","publication_status":"published","series_title":"Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI","publisher":"Springer","abstract":[{"lang":"eng","text":"Recent advances in the field of industrial digitization and automation lead to an increasing need for assistance systems to support workers in various fields of activity, such as assembly, logistics and maintenance. Current assistance systems for the maintenance area are usually based on a single visualization technology. However, in our view, this is not practicable in terms of real activities, as these operations involve various subtasks for which different interaction concepts would be advantageous. Therefore, in this paper, we propose a concept for a multi-device assistive system, which combines multiple devices to provide workers with relevant information over different subtasks of a maintenance operation and present our first prototype for such a system."}],"department":[{"_id":"DEP5023"}],"conference":{"name":"International Cross-Domain Conference, CD-MAKE 2018","location":"Hamburg","end_date":"2018-08-30","start_date":"2018-08-27"},"editor":[{"first_name":"Andreas","full_name":"Holzinger, Andreas","last_name":"Holzinger"},{"last_name":"Kieseberg","first_name":"Peter","full_name":"Kieseberg, Peter"},{"full_name":"Tjoa, A Min","last_name":"Tjoa","first_name":"A Min"},{"first_name":"Edgar","full_name":"Weippl, Edgar","last_name":"Weippl"}],"date_updated":"2023-03-15T13:49:52Z","publication":"Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018","publication_identifier":{"eisbn":["978-1-4503-6390-7"],"isbn":["978-3-319-99739-1"]},"date_created":"2021-01-08T08:26:18Z","keyword":["Human-machine-interaction","Multimodal feedback","Assistive systems","Augmented-reality","Smart factory"],"language":[{"iso":"eng"}],"oa":"1","volume":11015,"citation":{"apa":"Heinz, M., Dhiman, H., & Röcker, C. (2018). A Multi-Device Assistive System for Industrial Maintenance Operations. In A. Holzinger, P. Kieseberg, A. M. Tjoa, & E. Weippl (Eds.), Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018 (Vol. 11015, pp. 239–247). Cham: Springer. https://doi.org/10.1007/978-3-319-99740-7_16","chicago":"Heinz, Mario, Hitesh Dhiman, and Carsten Röcker. “A Multi-Device Assistive System for Industrial Maintenance Operations.” In Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, edited by Andreas Holzinger, Peter Kieseberg, A Min Tjoa, and Edgar Weippl, 11015:239–47. Lecture Notes in Computer Science / Information Systems and Applications, Incl. Internet/Web, and HCI. Cham: Springer, 2018. https://doi.org/10.1007/978-3-319-99740-7_16.","van":"Heinz M, Dhiman H, Röcker C. A Multi-Device Assistive System for Industrial Maintenance Operations. In: Holzinger A, Kieseberg P, Tjoa AM, Weippl E, editors. Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 84, 89, TC 12/WG 129 International Cross-Domain Conference, CD-MAKE 2018. Cham: Springer; 2018. p. 239–47. (Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI; vol. 11015).","bjps":"Heinz M, Dhiman H and Röcker C (2018) A Multi-Device Assistive System for Industrial Maintenance Operations. In Holzinger A et al. (eds), Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, vol. 11015. Cham: Springer, pp. 239–247.","mla":"Heinz, Mario, et al. “A Multi-Device Assistive System for Industrial Maintenance Operations.” Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, edited by Andreas Holzinger et al., vol. 11015, Springer, 2018, pp. 239–47, doi:10.1007/978-3-319-99740-7_16.","havard":"M. Heinz, H. Dhiman, C. Röcker, A Multi-Device Assistive System for Industrial Maintenance Operations, in: A. Holzinger, P. Kieseberg, A.M. Tjoa, E. Weippl (Eds.), Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, Springer, Cham, 2018: pp. 239–247.","ufg":"Heinz, Mario et. al. (2018): A Multi-Device Assistive System for Industrial Maintenance Operations, in: Andreas Holzinger et. al. (Hgg.): Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018 (=Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI 11015), Cham, S. 239–247.","short":"M. Heinz, H. Dhiman, C. Röcker, in: A. Holzinger, P. Kieseberg, A.M. Tjoa, E. Weippl (Eds.), Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, Springer, Cham, 2018, pp. 239–247.","chicago-de":"Heinz, Mario, Hitesh Dhiman und Carsten Röcker. 2018. A Multi-Device Assistive System for Industrial Maintenance Operations. In: Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, hg. von Andreas Holzinger, Peter Kieseberg, A Min Tjoa, und Edgar Weippl, 11015:239–247. Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI. Cham: Springer. doi:10.1007/978-3-319-99740-7_16, .","din1505-2-1":"Heinz, Mario ; Dhiman, Hitesh ; Röcker, Carsten: A Multi-Device Assistive System for Industrial Maintenance Operations. In: Holzinger, A. ; Kieseberg, P. ; Tjoa, A. M. ; Weippl, E. (Hrsg.): Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI. Bd. 11015. Cham : Springer, 2018, S. 239–247","ieee":"M. Heinz, H. Dhiman, and C. Röcker, “A Multi-Device Assistive System for Industrial Maintenance Operations,” in Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, Hamburg, 2018, vol. 11015, pp. 239–247.","ama":"Heinz M, Dhiman H, Röcker C. A Multi-Device Assistive System for Industrial Maintenance Operations. In: Holzinger A, Kieseberg P, Tjoa AM, Weippl E, eds. Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018. Vol 11015. Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI. Cham: Springer; 2018:239-247. doi:10.1007/978-3-319-99740-7_16"},"title":"A Multi-Device Assistive System for Industrial Maintenance Operations","status":"public","page":"239 - 247","year":2018,"author":[{"last_name":"Heinz","first_name":"Mario","full_name":"Heinz, Mario","id":"68913"},{"first_name":"Hitesh","id":"71767","full_name":"Dhiman, Hitesh","last_name":"Dhiman"},{"first_name":"Carsten","full_name":"Röcker, Carsten","id":"61525","last_name":"Röcker"}],"main_file_link":[{"open_access":"1"}]},{"keyword":["Uncertainties","Complexity","Human-machine interaction"],"language":[{"iso":"eng"}],"oa":"1","date_updated":"2023-03-15T13:49:52Z","editor":[{"last_name":"Karwowski","first_name":"Waldemar","full_name":"Karwowski, Waldemar"},{"last_name":"Trzcielinski","first_name":"Stefan","full_name":"Trzcielinski, Stefan"},{"last_name":"Mrugalska","first_name":"Beata","full_name":"Mrugalska, Beata"},{"first_name":"Massimo","full_name":"Di Nicolantonio, Massimo","last_name":"Di Nicolantonio"}],"publication_identifier":{"isbn":["978-3-319-94195-0"],"eisbn":["978-3-319-94196-7"]},"publication":"Advances in Manufacturing, Production Management and Process Control","date_created":"2021-01-08T08:26:19Z","status":"public","page":"103+114","year":2018,"author":[{"first_name":"Hitesh","full_name":"Dhiman, Hitesh","id":"71767","last_name":"Dhiman"},{"full_name":"Plewe, D. A.","first_name":"D. A.","last_name":"Plewe"},{"full_name":"Röcker, Carsten","last_name":"Röcker","id":"61525","first_name":"Carsten"}],"main_file_link":[{"open_access":"1"}],"volume":793,"citation":{"van":"Dhiman H, Plewe DA, Röcker C. Addressing Uncertainties in Complex Manufacturing Environments: A Multidisciplinary Approach. In: Karwowski W, Trzcielinski S, Mrugalska B, Di Nicolantonio M, editors. Advances in Manufacturing, Production Management and Process Control. Cham: Springer; 2018. p. 103+114. (Advances in Intelligent Systems and Computing ; vol. 793).","ama":"Dhiman H, Plewe DA, Röcker C. Addressing Uncertainties in Complex Manufacturing Environments: A Multidisciplinary Approach. In: Karwowski W, Trzcielinski S, Mrugalska B, Di Nicolantonio M, eds. Advances in Manufacturing, Production Management and Process Control. Vol 793. Advances in Intelligent Systems and Computing . Cham: Springer; 2018:103+114. doi:10.1007/978-3-319-94196-7_10","ufg":"Dhiman, Hitesh et. al. (2018): Addressing Uncertainties in Complex Manufacturing Environments: A Multidisciplinary Approach, in: Waldemar Karwowski et. al. (Hgg.): Advances in Manufacturing, Production Management and Process Control (=Advances in Intelligent Systems and Computing 793), Cham, S. 103+114.","mla":"Dhiman, Hitesh, et al. “Addressing Uncertainties in Complex Manufacturing Environments: A Multidisciplinary Approach.” Advances in Manufacturing, Production Management and Process Control, edited by Waldemar Karwowski et al., vol. 793, Springer, 2018, p. 103+114, doi:10.1007/978-3-319-94196-7_10.","havard":"H. Dhiman, D.A. Plewe, C. Röcker, Addressing Uncertainties in Complex Manufacturing Environments: A Multidisciplinary Approach, in: W. Karwowski, S. Trzcielinski, B. Mrugalska, M. Di Nicolantonio (Eds.), Advances in Manufacturing, Production Management and Process Control, Springer, Cham, 2018: p. 103+114.","bjps":"Dhiman H, Plewe DA and Röcker C (2018) Addressing Uncertainties in Complex Manufacturing Environments: A Multidisciplinary Approach. In Karwowski W et al. (eds), Advances in Manufacturing, Production Management and Process Control, vol. 793. Cham: Springer, p. 103+114.","apa":"Dhiman, H., Plewe, D. A., & Röcker, C. (2018). Addressing Uncertainties in Complex Manufacturing Environments: A Multidisciplinary Approach. In W. Karwowski, S. Trzcielinski, B. Mrugalska, & M. Di Nicolantonio (Eds.), Advances in Manufacturing, Production Management and Process Control (Vol. 793, p. 103+114). Cham: Springer. https://doi.org/10.1007/978-3-319-94196-7_10","ieee":"H. Dhiman, D. A. Plewe, and C. Röcker, “Addressing Uncertainties in Complex Manufacturing Environments: A Multidisciplinary Approach,” in Advances in Manufacturing, Production Management and Process Control, Orlando, Florida, USA, 2018, vol. 793, p. 103+114.","chicago":"Dhiman, Hitesh, D. A. Plewe, and Carsten Röcker. “Addressing Uncertainties in Complex Manufacturing Environments: A Multidisciplinary Approach.” In Advances in Manufacturing, Production Management and Process Control, edited by Waldemar Karwowski, Stefan Trzcielinski, Beata Mrugalska, and Massimo Di Nicolantonio, 793:103+114. Advances in Intelligent Systems and Computing . Cham: Springer, 2018. https://doi.org/10.1007/978-3-319-94196-7_10.","short":"H. Dhiman, D.A. Plewe, C. Röcker, in: W. Karwowski, S. Trzcielinski, B. Mrugalska, M. Di Nicolantonio (Eds.), Advances in Manufacturing, Production Management and Process Control, Springer, Cham, 2018, p. 103+114.","din1505-2-1":"Dhiman, Hitesh ; Plewe, D. A. ; Röcker, Carsten: Addressing Uncertainties in Complex Manufacturing Environments: A Multidisciplinary Approach. In: Karwowski, W. ; Trzcielinski, S. ; Mrugalska, B. ; Di Nicolantonio, M. (Hrsg.): Advances in Manufacturing, Production Management and Process Control, Advances in Intelligent Systems and Computing . Bd. 793. Cham : Springer, 2018, S. 103+114","chicago-de":"Dhiman, Hitesh, D. A. Plewe und Carsten Röcker. 2018. Addressing Uncertainties in Complex Manufacturing Environments: A Multidisciplinary Approach. In: Advances in Manufacturing, Production Management and Process Control, hg. von Waldemar Karwowski, Stefan Trzcielinski, Beata Mrugalska, und Massimo Di Nicolantonio, 793:103+114. Advances in Intelligent Systems and Computing . Cham: Springer. doi:10.1007/978-3-319-94196-7_10, ."},"title":"Addressing Uncertainties in Complex Manufacturing Environments: A Multidisciplinary Approach","place":"Cham","_id":"4319","doi":"10.1007/978-3-319-94196-7_10","user_id":"15514","intvolume":" 793","type":"conference","publisher":"Springer","conference":{"location":"Orlando, Florida, USA","name":"2018 International Conference on Advanced Production Management and Process Control ; AHFE 2018","end_date":"2018-07-25","start_date":"2018-07-21"},"department":[{"_id":"DEP5023"}],"abstract":[{"text":"With the introduction of intelligent and autonomous systems into factory environments, workplaces where human employees work alongside digital counterparts will become increasingly informational. We develop a generic framework for hypothetical workplaces to investigate how complexities create to uncertainties. Complexity may be explained through the Level of Abstractions used to model a system, and it is encountered in its dynamic form as an alteration of information flow between agents in a phenomenological relationship. Analyzing these systems as ‘information flows’ brings to light the uncertainity(ies) the workers of the future will have to cope with. We develop first concepts that can be used to develop heuristics to manage these uncertainties in complex manufacturing environments. These heuristics may also be useful in creating optimized workplaces that combine the individual abilities of both humans and machines. The framework proposed in this paper may be subject for an empirical validation of these heuristics in the future.","lang":"eng"}],"publication_status":"published","series_title":"Advances in Intelligent Systems and Computing "},{"citation":{"ufg":"Aksu, Volkan et. al. (2018): A Digital Assistance System Providing Step-by-Step Support for People with Disabilities in Production Tasks, in: Tareq Z. Ahram/Christianne Falcão (Hgg.): Advances in Usability, User Experience and Assistive Technology (=Advances in Intelligent Systems and Computing 794), Cham, S. 775–785.","havard":"V. Aksu, S. Jenderny, S. Martinez, C. Röcker, A Digital Assistance System Providing Step-by-Step Support for People with Disabilities in Production Tasks, in: T.Z. Ahram, C. Falcão (Eds.), Advances in Usability, User Experience and Assistive Technology, Springer, Cham, 2018: pp. 775–785.","bjps":"Aksu V et al. (2018) A Digital Assistance System Providing Step-by-Step Support for People with Disabilities in Production Tasks. In Ahram TZ and Falcão C (eds), Advances in Usability, User Experience and Assistive Technology, vol. 794. Cham: Springer, pp. 775–785.","mla":"Aksu, Volkan, et al. “A Digital Assistance System Providing Step-by-Step Support for People with Disabilities in Production Tasks.” Advances in Usability, User Experience and Assistive Technology, edited by Tareq Z. Ahram and Christianne Falcão, vol. 794, Springer, 2018, pp. 775–85, doi:10.1007/978-3-319-94947-5_76.","van":"Aksu V, Jenderny S, Martinez S, Röcker C. A Digital Assistance System Providing Step-by-Step Support for People with Disabilities in Production Tasks. In: Ahram TZ, Falcão C, editors. Advances in Usability, User Experience and Assistive Technology. Cham: Springer; 2018. p. 775–85. (Advances in Intelligent Systems and Computing; vol. 794).","ama":"Aksu V, Jenderny S, Martinez S, Röcker C. A Digital Assistance System Providing Step-by-Step Support for People with Disabilities in Production Tasks. In: Ahram TZ, Falcão C, eds. Advances in Usability, User Experience and Assistive Technology. Vol 794. Advances in Intelligent Systems and Computing. Cham: Springer; 2018:775-785. doi:10.1007/978-3-319-94947-5_76","chicago":"Aksu, Volkan, Sascha Jenderny, Sascha Martinez, and Carsten Röcker. “A Digital Assistance System Providing Step-by-Step Support for People with Disabilities in Production Tasks.” In Advances in Usability, User Experience and Assistive Technology, edited by Tareq Z. Ahram and Christianne Falcão, 794:775–85. Advances in Intelligent Systems and Computing. Cham: Springer, 2018. https://doi.org/10.1007/978-3-319-94947-5_76.","apa":"Aksu, V., Jenderny, S., Martinez, S., & Röcker, C. (2018). A Digital Assistance System Providing Step-by-Step Support for People with Disabilities in Production Tasks. In T. Z. Ahram & C. Falcão (Eds.), Advances in Usability, User Experience and Assistive Technology (Vol. 794, pp. 775–785). Cham: Springer. https://doi.org/10.1007/978-3-319-94947-5_76","ieee":"V. Aksu, S. Jenderny, S. Martinez, and C. Röcker, “A Digital Assistance System Providing Step-by-Step Support for People with Disabilities in Production Tasks,” in Advances in Usability, User Experience and Assistive Technology, Orlando, Florida, USA, 2018, vol. 794, pp. 775–785.","chicago-de":"Aksu, Volkan, Sascha Jenderny, Sascha Martinez und Carsten Röcker. 2018. A Digital Assistance System Providing Step-by-Step Support for People with Disabilities in Production Tasks. In: Advances in Usability, User Experience and Assistive Technology, hg. von Tareq Z. Ahram und Christianne Falcão, 794:775–785. Advances in Intelligent Systems and Computing. Cham: Springer. doi:10.1007/978-3-319-94947-5_76, .","din1505-2-1":"Aksu, Volkan ; Jenderny, Sascha ; Martinez, Sascha ; Röcker, Carsten: A Digital Assistance System Providing Step-by-Step Support for People with Disabilities in Production Tasks. In: Ahram, T. Z. ; Falcão, C. (Hrsg.): Advances in Usability, User Experience and Assistive Technology, Advances in Intelligent Systems and Computing. Bd. 794. Cham : Springer, 2018, S. 775–785","short":"V. Aksu, S. Jenderny, S. Martinez, C. Röcker, in: T.Z. Ahram, C. Falcão (Eds.), Advances in Usability, User Experience and Assistive Technology, Springer, Cham, 2018, pp. 775–785."},"volume":794,"title":"A Digital Assistance System Providing Step-by-Step Support for People with Disabilities in Production Tasks","page":"775-785","status":"public","year":2018,"author":[{"first_name":"Volkan","last_name":"Aksu","full_name":"Aksu, Volkan"},{"first_name":"Sascha","full_name":"Jenderny, Sascha","last_name":"Jenderny"},{"first_name":"Sascha","last_name":"Martinez","full_name":"Martinez, Sascha"},{"first_name":"Carsten","id":"61525","last_name":"Röcker","full_name":"Röcker, Carsten"}],"main_file_link":[{"open_access":"1"}],"date_updated":"2023-03-15T13:49:52Z","editor":[{"full_name":"Ahram, Tareq Z.","first_name":"Tareq Z.","last_name":"Ahram"},{"full_name":"Falcão, Christianne","last_name":"Falcão","first_name":"Christianne"}],"date_created":"2021-01-08T08:26:20Z","publication":"Advances in Usability, User Experience and Assistive Technology","publication_identifier":{"isbn":["978-3-319-94946-8"],"eisbn":["978-3-319-94947-5"]},"language":[{"iso":"eng"}],"keyword":["Assistive Technology","People with disabilities","User-centered","Design","Human-computer-interaction","Production Step-by-step instructions"],"oa":"1","publication_status":"published","series_title":"Advances in Intelligent Systems and Computing","publisher":"Springer","conference":{"name":"2018 International Conferences on Usability & User Experience and Human Factors and Assistive Technology ; AHFE 2018","location":"Orlando, Florida, USA","end_date":"2018-07-25","start_date":"2018-07-21"},"department":[{"_id":"DEP5023"}],"abstract":[{"lang":"eng","text":"The use of Assistive Technology (AT) plays a significant role in the advancement of greater independence for individuals with disabilities in their work life. In particular, digital step-by-step support can enable people to perform production tasks that were formerly difficult to accomplish. In this paper, we focused on finding a solution for a specific production process. To this end, we set up a prototype assistive system for performing a cutting task which provides step-by-step support for people with disabilities. In an evaluation study with impaired people, we investigated how our assistive system affects the task efficiency as well as participants’ subjective evaluation of perceived mental effort and system usability. Results show advantages for step-by-step support with regard to users’ task efficiency and subjective evaluation."}],"user_id":"15514","intvolume":" 794","type":"conference","place":"Cham","doi":"10.1007/978-3-319-94947-5_76","_id":"4320"},{"title":"Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace","citation":{"ufg":"Aksu, Volkan et. al. (2018): Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace, in: Giuseppe Di Bucchianico (Hg.): Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace (=Advances in Intelligent Systems and Computing 776), Cham, S. 3–14.","bjps":"Aksu V et al. (2018) Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace. In Di Bucchianico G (ed.), Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace, vol. 776. Cham: Springer, pp. 3–14.","mla":"Aksu, Volkan, et al. “Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace.” Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace, edited by Giuseppe Di Bucchianico, vol. 776, Springer, 2018, pp. 3–14, doi:10.1007/978-3-319-94622-1_1.","havard":"V. Aksu, S. Jenderny, S. Martinez, C. Röcker, Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace, in: G. Di Bucchianico (Ed.), Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace, Springer, Cham, 2018: pp. 3–14.","van":"Aksu V, Jenderny S, Martinez S, Röcker C. Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace. In: Di Bucchianico G, editor. Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace. Cham: Springer; 2018. p. 3–14. (Advances in Intelligent Systems and Computing; vol. 776).","chicago":"Aksu, Volkan, Sascha Jenderny, Sascha Martinez, and Carsten Röcker. “Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace.” In Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace, edited by Giuseppe Di Bucchianico, 776:3–14. Advances in Intelligent Systems and Computing. Cham: Springer, 2018. https://doi.org/10.1007/978-3-319-94622-1_1.","apa":"Aksu, V., Jenderny, S., Martinez, S., & Röcker, C. (2018). Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace. In G. Di Bucchianico (Ed.), Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace (Vol. 776, pp. 3–14). Cham: Springer. https://doi.org/10.1007/978-3-319-94622-1_1","din1505-2-1":"Aksu, Volkan ; Jenderny, Sascha ; Martinez, Sascha ; Röcker, Carsten: Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace. In: Di Bucchianico, G. (Hrsg.): Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace, Advances in Intelligent Systems and Computing. Bd. 776. Cham : Springer, 2018, S. 3–14","chicago-de":"Aksu, Volkan, Sascha Jenderny, Sascha Martinez und Carsten Röcker. 2018. Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace. In: Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace, hg. von Giuseppe Di Bucchianico, 776:3–14. Advances in Intelligent Systems and Computing. Cham: Springer. doi:10.1007/978-3-319-94622-1_1, .","short":"V. Aksu, S. Jenderny, S. Martinez, C. Röcker, in: G. Di Bucchianico (Ed.), Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace, Springer, Cham, 2018, pp. 3–14.","ama":"Aksu V, Jenderny S, Martinez S, Röcker C. Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace. In: Di Bucchianico G, ed. Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace. Vol 776. Advances in Intelligent Systems and Computing. Cham: Springer; 2018:3-14. doi:10.1007/978-3-319-94622-1_1","ieee":"V. Aksu, S. Jenderny, S. Martinez, and C. Röcker, “Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace,” in Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace, Orlando, Florida, USA, 2018, vol. 776, pp. 3–14."},"volume":776,"author":[{"first_name":"Volkan","full_name":"Aksu, Volkan","last_name":"Aksu"},{"first_name":"Sascha","last_name":"Jenderny","full_name":"Jenderny, Sascha"},{"first_name":"Sascha","last_name":"Martinez","full_name":"Martinez, Sascha"},{"id":"61525","full_name":"Röcker, Carsten","first_name":"Carsten","last_name":"Röcker"}],"year":2018,"main_file_link":[{"open_access":"1"}],"page":"3-14","status":"public","date_created":"2021-01-08T08:26:22Z","publication_identifier":{"isbn":["978-3-319-94621-4"],"eisbn":["978-3-319-94622-1"]},"publication":"Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace","date_updated":"2023-03-15T13:49:52Z","editor":[{"first_name":"Giuseppe ","last_name":"Di Bucchianico","full_name":"Di Bucchianico, Giuseppe "}],"oa":"1","language":[{"iso":"eng"}],"keyword":["Assistive technology","People with disabilities : Human computer interaction : Industry 4.0","Inclusion","Context-sensitive assistance","Step-by-step instructions","Production","Mobile assistance"],"series_title":"Advances in Intelligent Systems and Computing","publication_status":"published","department":[{"_id":"DEP5023"}],"conference":{"end_date":"2018-07-25","start_date":"201-07-21","location":"Orlando, Florida, USA","name":"2018 International Conference on Advanced Production Management and Process Control ; AHFE 2018"},"abstract":[{"text":"Recent research has shown that computer-based Assistive Technology (AT) has the potential to support individuals with disabilities in production environments. At the same time, step-by-step instructions enable workers to be successful in their performance of industrial tasks that were formerly difficult to accomplish. We merged these two types of intervention and developed an application running on a mobile device that can assist disabled workers working more independently. In an evaluation study, we investigated how our assistive system affects the task efficiency as well as participants’ subjective evaluation. Results show advantages when using the assistive prototype with regard to users’ task efficiency and subjective evaluations.","lang":"eng"}],"publisher":"Springer","type":"conference","user_id":"15514","intvolume":" 776","place":"Cham","doi":"10.1007/978-3-319-94622-1_1","_id":"4321"},{"volume":793,"citation":{"short":"V. Paelke, J. Bulk, C. Röcker, in: International Conference on Applied Human Factors and Ergonomics, Springer, Cham, 2018, pp. 25–35.","chicago-de":"Paelke, Volker, Jendrik Bulk und Carsten Röcker. 2018. A Test Platform for the Evaluation of Augmented Reality Head Mounted Displays in Industrial Applications . In: International Conference on Applied Human Factors and Ergonomics, 793:25–35. Advances in Intelligent Systems and Computing. Cham: Springer. doi:10.1007/978-3-319-94196-7_3, .","din1505-2-1":"Paelke, Volker ; Bulk, Jendrik ; Röcker, Carsten: A Test Platform for the Evaluation of Augmented Reality Head Mounted Displays in Industrial Applications . In: International Conference on Applied Human Factors and Ergonomics, Advances in Intelligent Systems and Computing. Bd. 793. Cham : Springer, 2018, S. 25–35","van":"Paelke V, Bulk J, Röcker C. A Test Platform for the Evaluation of Augmented Reality Head Mounted Displays in Industrial Applications . In: International Conference on Applied Human Factors and Ergonomics. Cham: Springer; 2018. p. 25–35. (Advances in Intelligent Systems and Computing; vol. 793).","ufg":"Paelke, Volker et. al. (2018): A Test Platform for the Evaluation of Augmented Reality Head Mounted Displays in Industrial Applications , in: International Conference on Applied Human Factors and Ergonomics (=Advances in Intelligent Systems and Computing 793), Cham, S. 25–35.","bjps":"Paelke V, Bulk J and Röcker C (2018) A Test Platform for the Evaluation of Augmented Reality Head Mounted Displays in Industrial Applications . International Conference on Applied Human Factors and Ergonomics, vol. 793. Cham: Springer, pp. 25–35.","havard":"V. Paelke, J. Bulk, C. Röcker, A Test Platform for the Evaluation of Augmented Reality Head Mounted Displays in Industrial Applications , in: International Conference on Applied Human Factors and Ergonomics, Springer, Cham, 2018: pp. 25–35.","mla":"Paelke, Volker, et al. “A Test Platform for the Evaluation of Augmented Reality Head Mounted Displays in Industrial Applications .” International Conference on Applied Human Factors and Ergonomics, vol. 793, Springer, 2018, pp. 25–35, doi:10.1007/978-3-319-94196-7_3.","apa":"Paelke, V., Bulk, J., & Röcker, C. (2018). A Test Platform for the Evaluation of Augmented Reality Head Mounted Displays in Industrial Applications . In International Conference on Applied Human Factors and Ergonomics (Vol. 793, pp. 25–35). Cham: Springer. https://doi.org/10.1007/978-3-319-94196-7_3","chicago":"Paelke, Volker, Jendrik Bulk, and Carsten Röcker. “A Test Platform for the Evaluation of Augmented Reality Head Mounted Displays in Industrial Applications .” In International Conference on Applied Human Factors and Ergonomics, 793:25–35. Advances in Intelligent Systems and Computing. Cham: Springer, 2018. https://doi.org/10.1007/978-3-319-94196-7_3.","ama":"Paelke V, Bulk J, Röcker C. A Test Platform for the Evaluation of Augmented Reality Head Mounted Displays in Industrial Applications . In: International Conference on Applied Human Factors and Ergonomics. Vol 793. Advances in Intelligent Systems and Computing. Cham: Springer; 2018:25-35. doi:10.1007/978-3-319-94196-7_3","ieee":"V. Paelke, J. Bulk, and C. Röcker, “A Test Platform for the Evaluation of Augmented Reality Head Mounted Displays in Industrial Applications ,” in International Conference on Applied Human Factors and Ergonomics, Orlando, Florida, USA, 2018, vol. 793, pp. 25–35."},"title":"A Test Platform for the Evaluation of Augmented Reality Head Mounted Displays in Industrial Applications ","status":"public","page":"25-35","main_file_link":[{"open_access":"1"}],"year":2018,"author":[{"first_name":"Volker","last_name":"Paelke","full_name":"Paelke, Volker"},{"first_name":"Jendrik","last_name":"Bulk","full_name":"Bulk, Jendrik"},{"id":"61525","last_name":"Röcker","first_name":"Carsten","full_name":"Röcker, Carsten"}],"date_updated":"2023-03-15T13:49:52Z","publication_identifier":{"eisbn":["978-3-319-94196-7"],"isbn":["978-3-319-94195-0"]},"publication":"International Conference on Applied Human Factors and Ergonomics","date_created":"2021-01-08T08:26:23Z","keyword":["Head-Mounted Displays (HMDs)","Augmented Reality (AR)","Test platform","Evaluation","Assembly"],"language":[{"iso":"eng"}],"oa":"1","publication_status":"published","series_title":"Advances in Intelligent Systems and Computing","publisher":"Springer","department":[{"_id":"DEP5023"}],"conference":{"end_date":"2018-07-25","start_date":"2018-07-21","location":"Orlando, Florida, USA","name":"2018 International Conference on Advanced Production Management and Process Control ; AHFE 2018"},"abstract":[{"lang":"eng","text":"This paper presents a test platform for the systematic evaluation of head-mounted displays (HMDs). The focus is on an augmented reality (AR) test application for assembly tasks, which supports tests that are flexible in terms of complexity and scope, thus enabling the realistic assessment of usability, comfort and ergonomics by the test users."}],"user_id":"15514","intvolume":" 793","type":"conference","place":" Cham","_id":"4322","doi":"10.1007/978-3-319-94196-7_3"},{"publication_status":"published","series_title":"Lecture Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web, and HCI ","publisher":"Springer","conference":{"location":"Las Vegas, NV, USA","name":"5th International Conference, HCIBGO 2018, Held as Part of HCI International 2018","end_date":"2018-07-20","start_date":"2018-07-15"},"department":[{"_id":"DEP5023"}],"abstract":[{"text":"The latest generation of head-mounted displays such as HoloLens pro- vide mixed reality capabilities that claim to better integrate the real and virtual worlds. In this paper, we would like the share our experiences in implementing a user interface for an assembly assistance system using the HoloLens. We carried out a preliminary evaluation of the applicability of mixed reality using the per- spective of developers and expert users in an assembly scenario that allows us to operate and compare two interfaces - a state-of-the-art projector display system and the HoloLens. We believe our findings may contribute towards a better un- derstanding of the effects of new display technologies such as the HoloLens in developing and using assistance systems in other fields as well. Areas that may be of future research are also highlighted.","lang":"eng"}],"user_id":"83781","intvolume":" 10923","type":"conference","place":"Cham","_id":"4323","doi":"10.1007/978-3-319-91716-0_6","volume":10923,"citation":{"van":"Dhiman H, Martinez S, Paelke V, Röcker C. Head-Mounted Displays in Industrial AR-Applications: Ready for Prime Time? In: Fui-Hoon Nah F, Sophia Xiao B, editors. HCI in Business, Government, and Organizations. Cham: Springer; 2018. p. 67–78. (Lecture Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web, and HCI ; vol. 10923).","bjps":"Dhiman H et al. (2018) Head-Mounted Displays in Industrial AR-Applications: Ready for Prime Time? In Fui-Hoon Nah F and Sophia Xiao B (eds), HCI in Business, Government, and Organizations, vol. 10923. Cham: Springer, pp. 67–78.","havard":"H. Dhiman, S. Martinez, V. Paelke, C. Röcker, Head-Mounted Displays in Industrial AR-Applications: Ready for Prime Time?, in: F. Fui-Hoon Nah, B. Sophia Xiao (Eds.), HCI in Business, Government, and Organizations, Springer, Cham, 2018: pp. 67–78.","mla":"Dhiman, Hitesh, et al. “Head-Mounted Displays in Industrial AR-Applications: Ready for Prime Time?” HCI in Business, Government, and Organizations, edited by Fiona Fui-Hoon Nah and Bo Sophia Xiao, vol. 10923, Springer, 2018, pp. 67–78, https://doi.org/10.1007/978-3-319-91716-0_6.","ufg":"Dhiman, Hitesh u. a.: Head-Mounted Displays in Industrial AR-Applications: Ready for Prime Time?, in: Fui-Hoon Nah, Fiona/Sophia Xiao, Bo (Hgg.): HCI in Business, Government, and Organizations, Bd. 10923, Cham 2018 (Lecture Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web, and HCI ), S. 67–78.","apa":"Dhiman, H., Martinez, S., Paelke, V., & Röcker, C. (2018). Head-Mounted Displays in Industrial AR-Applications: Ready for Prime Time? In F. Fui-Hoon Nah & B. Sophia Xiao (Eds.), HCI in Business, Government, and Organizations (Vol. 10923, pp. 67–78). Springer. https://doi.org/10.1007/978-3-319-91716-0_6","chicago":"Dhiman, Hitesh, Sascha Martinez, Volker Paelke, and Carsten Röcker. “Head-Mounted Displays in Industrial AR-Applications: Ready for Prime Time?” In HCI in Business, Government, and Organizations, edited by Fiona Fui-Hoon Nah and Bo Sophia Xiao, 10923:67–78. Lecture Notes in Computer Science ; Information Systems and Applications, Incl. Internet/Web, and HCI . Cham: Springer, 2018. https://doi.org/10.1007/978-3-319-91716-0_6.","short":"H. Dhiman, S. Martinez, V. Paelke, C. Röcker, in: F. Fui-Hoon Nah, B. Sophia Xiao (Eds.), HCI in Business, Government, and Organizations, Springer, Cham, 2018, pp. 67–78.","chicago-de":"Dhiman, Hitesh, Sascha Martinez, Volker Paelke und Carsten Röcker. 2018. Head-Mounted Displays in Industrial AR-Applications: Ready for Prime Time? In: HCI in Business, Government, and Organizations, hg. von Fiona Fui-Hoon Nah und Bo Sophia Xiao, 10923:67–78. Lecture Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web, and HCI . Cham: Springer. doi:10.1007/978-3-319-91716-0_6, .","din1505-2-1":"Dhiman, Hitesh ; Martinez, Sascha ; Paelke, Volker ; Röcker, Carsten: Head-Mounted Displays in Industrial AR-Applications: Ready for Prime Time? In: Fui-Hoon Nah, F. ; Sophia Xiao, B. (Hrsg.): HCI in Business, Government, and Organizations, Lecture Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web, and HCI . Bd. 10923. Cham : Springer, 2018, S. 67–78","ama":"Dhiman H, Martinez S, Paelke V, Röcker C. Head-Mounted Displays in Industrial AR-Applications: Ready for Prime Time? In: Fui-Hoon Nah F, Sophia Xiao B, eds. HCI in Business, Government, and Organizations. Vol 10923. Lecture Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web, and HCI . Springer; 2018:67-78. doi:10.1007/978-3-319-91716-0_6","ieee":"H. Dhiman, S. Martinez, V. Paelke, and C. Röcker, “Head-Mounted Displays in Industrial AR-Applications: Ready for Prime Time?,” in HCI in Business, Government, and Organizations, Las Vegas, NV, USA, 2018, vol. 10923, pp. 67–78. doi: 10.1007/978-3-319-91716-0_6."},"title":"Head-Mounted Displays in Industrial AR-Applications: Ready for Prime Time?","status":"public","page":"67-78","year":"2018","author":[{"id":"71767","full_name":"Dhiman, Hitesh","first_name":"Hitesh","last_name":"Dhiman"},{"first_name":"Sascha","last_name":"Martinez","full_name":"Martinez, Sascha"},{"full_name":"Paelke, Volker","last_name":"Paelke","first_name":"Volker"},{"id":"61525","first_name":"Carsten","last_name":"Röcker","full_name":"Röcker, Carsten"}],"date_updated":"2025-04-11T09:02:30Z","editor":[{"first_name":"Fiona","last_name":"Fui-Hoon Nah","full_name":"Fui-Hoon Nah, Fiona"},{"full_name":"Sophia Xiao, Bo","first_name":"Bo","last_name":"Sophia Xiao"}],"publication_identifier":{"eisbn":["978-3-319-91716-0"],"isbn":["978-3-319-91715-3"]},"publication":"HCI in Business, Government, and Organizations","date_created":"2021-01-08T08:26:24Z","keyword":["Human machine interaction","Assembly assistance system","Qualitative study","HoloLens"],"language":[{"iso":"eng"}]},{"date_created":"2021-01-08T08:26:26Z","publication_identifier":{"isbn":["978-3-319-99739-1"],"eisbn":["978-3-319-99740-7"]},"publication":"Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018","date_updated":"2023-03-15T13:49:52Z","editor":[{"first_name":"Andreas","full_name":"Holzinger, Andreas","last_name":"Holzinger"},{"last_name":" Kieseberg","full_name":" Kieseberg, Peter","first_name":"Peter"},{"last_name":"Tjoa","first_name":"A Min","full_name":"Tjoa, A Min"},{"last_name":"Weippl","first_name":"Edgar","full_name":"Weippl, Edgar"}],"oa":"1","language":[{"iso":"eng"}],"keyword":["Human-machine-interaction","Multimodal feedback","Assistive systems","Augmented-reality","Smart factory"],"title":"Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities","volume":11015,"citation":{"ama":"Heinz M, Röcker C. Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities. In: Holzinger A, Kieseberg P, Tjoa AM, Weippl E, eds. Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018. Vol 11015. Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI. Cham: Springer; 2018. doi:10.1007/978-3-319-99740-7_17","ieee":"M. Heinz and C. Röcker, “Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities,” in Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, Hamburg, 2018, vol. 11015.","van":"Heinz M, Röcker C. Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities. In: Holzinger A, Kieseberg P, Tjoa AM, Weippl E, editors. Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 84, 89, TC 12/WG 129 International Cross-Domain Conference, CD-MAKE 2018. Cham: Springer; 2018. (Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI; vol. 11015).","bjps":"Heinz M and Röcker C (2018) Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities. In Holzinger A et al. (eds), Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, vol. 11015. Cham: Springer.","havard":"M. Heinz, C. Röcker, Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities, in: A. Holzinger, P. Kieseberg, A.M. Tjoa, E. Weippl (Eds.), Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, Springer, Cham, 2018.","mla":"Heinz, Mario, and Carsten Röcker. “Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities.” Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, edited by Andreas Holzinger et al., vol. 11015, Springer, 2018, doi:10.1007/978-3-319-99740-7_17.","ufg":"Heinz, Mario/Röcker, Carsten (2018): Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities, in: Andreas Holzinger et. al. (Hgg.): Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018 (=Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI 11015), Cham.","apa":"Heinz, M., & Röcker, C. (2018). Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities. In A. Holzinger, P. Kieseberg, A. M. Tjoa, & E. Weippl (Eds.), Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018 (Vol. 11015). Cham: Springer. https://doi.org/10.1007/978-3-319-99740-7_17","chicago":"Heinz, Mario, and Carsten Röcker. “Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities.” In Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, edited by Andreas Holzinger, Peter Kieseberg, A Min Tjoa, and Edgar Weippl, Vol. 11015. Lecture Notes in Computer Science / Information Systems and Applications, Incl. Internet/Web, and HCI. Cham: Springer, 2018. https://doi.org/10.1007/978-3-319-99740-7_17.","short":"M. Heinz, C. Röcker, in: A. Holzinger, P. Kieseberg, A.M. Tjoa, E. Weippl (Eds.), Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, Springer, Cham, 2018.","din1505-2-1":"Heinz, Mario ; Röcker, Carsten: Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities. In: Holzinger, A. ; Kieseberg, P. ; Tjoa, A. M. ; Weippl, E. (Hrsg.): Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI. Bd. 11015. Cham : Springer, 2018","chicago-de":"Heinz, Mario und Carsten Röcker. 2018. Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities. In: Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, hg. von Andreas Holzinger, Peter Kieseberg, A Min Tjoa, und Edgar Weippl, 11015:. Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI. Cham: Springer. doi:10.1007/978-3-319-99740-7_17, ."},"year":2018,"main_file_link":[{"open_access":"1"}],"author":[{"first_name":"Mario","id":"68913","full_name":"Heinz, Mario","last_name":"Heinz"},{"last_name":"Röcker","first_name":"Carsten","id":"61525","full_name":"Röcker, Carsten"}],"status":"public","type":"conference","user_id":"15514","intvolume":" 11015","place":"Cham","doi":"10.1007/978-3-319-99740-7_17","_id":"4324","series_title":"Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI","publication_status":"published","department":[{"_id":"DEP5023"}],"conference":{"name":" International Cross-Domain Conference, CD-MAKE 2018","location":"Hamburg","end_date":"2018-08-30","start_date":"2018-08-27"},"abstract":[{"text":"On the long term, the current wave of digitization and automation in the industrial environment will result in a progressively higher complexity and heterogeneity in the industrial environment. In this context, a growing need arises for the development of digital assistance systems to support workers in various fields of activities. Current systems are generally limited to visualizations and visual feedback. Therefore, in the scope of this paper, we take a look at the major challenges and opportunities for the integration of multimodal feedback systems in today’s and future industrial environments. It shows that the integration of multimodal feedback is subject to a complex combination of technical, user-cenric and legal aspects.","lang":"eng"}],"publisher":"Springer"},{"abstract":[{"text":"With the introduction of intelligent and autonomous systems into factory environments, workplaces where human employees work alongside digital counterparts will become increasingly informational. We develop a generic framework for hypothetical workplaces to investigate how complexities create to uncertainties. Complexity may be explained through the Level of Abstractions used to model a system, and it is encountered in its dynamic form as an alteration of information flow between agents in a phenomenological relationship. Analyzing these systems as ‘information flows’ brings to light the uncertainity(ies) the workers of the future will have to cope with. We develop first concepts that can be used to develop heuristics to manage these uncertainties in complex manufacturing environments. These heuristics may also be useful in creating optimized workplaces that combine the individual abilities of both humans and machines. The framework proposed in this paper may be subject for an empirical validation of these heuristics in the future. ","lang":"eng"}],"department":[{"_id":"DEP5023"}],"conference":{"end_date":"2018-07-25","start_date":"2018-07-21","name":"2018 International Conference on Advanced Production Management and Process Control ; AHFE 2018 ","location":"Orlando, Florida, USA"},"publisher":"Springer","series_title":" Advances in Intelligent Systems and Computing ","publication_status":"published","doi":"10.1007/978-3-319-94196-7_10","_id":"4325","place":"Cham","type":"conference","intvolume":" 793","user_id":"15514","author":[{"last_name":"Dhiman","first_name":"Hitesh","id":"71767","full_name":"Dhiman, Hitesh"},{"full_name":"Plewe, D. A.","first_name":"D. A.","last_name":"Plewe"},{"id":"61525","first_name":"Carsten","full_name":"Röcker, Carsten","last_name":"Röcker"}],"main_file_link":[{"open_access":"1"}],"year":2018,"page":" 103-114","status":"public","title":"Addressing Uncertainties in Complex Manufacturing Environments: A Multidisciplinary Approach","citation":{"ama":"Dhiman H, Plewe DA, Röcker C. Addressing Uncertainties in Complex Manufacturing Environments: A Multidisciplinary Approach. In: International Conference on Applied Human Factors and Ergonomics. Vol 793. Advances in Intelligent Systems and Computing . Cham: Springer; 2018:103-114. doi:10.1007/978-3-319-94196-7_10","ieee":"H. Dhiman, D. A. Plewe, and C. Röcker, “Addressing Uncertainties in Complex Manufacturing Environments: A Multidisciplinary Approach,” in International Conference on Applied Human Factors and Ergonomics, Orlando, Florida, USA, 2018, vol. 793, pp. 103–114.","din1505-2-1":"Dhiman, Hitesh ; Plewe, D. A. ; Röcker, Carsten: Addressing Uncertainties in Complex Manufacturing Environments: A Multidisciplinary Approach. In: International Conference on Applied Human Factors and Ergonomics, Advances in Intelligent Systems and Computing . Bd. 793. Cham : Springer, 2018, S. 103–114","chicago-de":"Dhiman, Hitesh, D. A. Plewe und Carsten Röcker. 2018. Addressing Uncertainties in Complex Manufacturing Environments: A Multidisciplinary Approach. In: International Conference on Applied Human Factors and Ergonomics, 793:103–114. Advances in Intelligent Systems and Computing . Cham: Springer. doi:10.1007/978-3-319-94196-7_10, .","short":"H. Dhiman, D.A. Plewe, C. Röcker, in: International Conference on Applied Human Factors and Ergonomics, Springer, Cham, 2018, pp. 103–114.","bjps":"Dhiman H, Plewe DA and Röcker C (2018) Addressing Uncertainties in Complex Manufacturing Environments: A Multidisciplinary Approach. International Conference on Applied Human Factors and Ergonomics, vol. 793. Cham: Springer, pp. 103–114.","havard":"H. Dhiman, D.A. Plewe, C. Röcker, Addressing Uncertainties in Complex Manufacturing Environments: A Multidisciplinary Approach, in: International Conference on Applied Human Factors and Ergonomics, Springer, Cham, 2018: pp. 103–114.","mla":"Dhiman, Hitesh, et al. “Addressing Uncertainties in Complex Manufacturing Environments: A Multidisciplinary Approach.” International Conference on Applied Human Factors and Ergonomics, vol. 793, Springer, 2018, pp. 103–14, doi:10.1007/978-3-319-94196-7_10.","ufg":"Dhiman, Hitesh et. al. (2018): Addressing Uncertainties in Complex Manufacturing Environments: A Multidisciplinary Approach, in: International Conference on Applied Human Factors and Ergonomics (= Advances in Intelligent Systems and Computing 793), Cham, S. 103–114.","van":"Dhiman H, Plewe DA, Röcker C. Addressing Uncertainties in Complex Manufacturing Environments: A Multidisciplinary Approach. In: International Conference on Applied Human Factors and Ergonomics. Cham: Springer; 2018. p. 103–14. ( Advances in Intelligent Systems and Computing ; vol. 793).","chicago":"Dhiman, Hitesh, D. A. Plewe, and Carsten Röcker. “Addressing Uncertainties in Complex Manufacturing Environments: A Multidisciplinary Approach.” In International Conference on Applied Human Factors and Ergonomics, 793:103–14. Advances in Intelligent Systems and Computing . Cham: Springer, 2018. https://doi.org/10.1007/978-3-319-94196-7_10.","apa":"Dhiman, H., Plewe, D. A., & Röcker, C. (2018). Addressing Uncertainties in Complex Manufacturing Environments: A Multidisciplinary Approach. In International Conference on Applied Human Factors and Ergonomics (Vol. 793, pp. 103–114). Cham: Springer. https://doi.org/10.1007/978-3-319-94196-7_10"},"volume":793,"oa":"1","language":[{"iso":"eng"}],"keyword":["Uncertainties","Complexity","Human-machine interaction"],"date_created":"2021-01-08T08:26:27Z","publication_identifier":{"eisbn":["978-3-319-94196-7"],"isbn":["978-3-319-94195-0"]},"publication":"International Conference on Applied Human Factors and Ergonomics","date_updated":"2023-03-15T13:49:52Z"},{"publisher":"ACM","department":[{"_id":"DEP5023"}],"conference":{"start_date":"2018-06-26","end_date":"2018-06-29","location":"Corfu, Greece","name":"11th ACM International Conference on PErvasive Technologies Related to Assistive Environments ; PETRA 2018 "},"abstract":[{"lang":"eng","text":"The mechanical engineering and related industries are increasingly being dominated by information and communication technology, leading to the development of cyber-physical systems. However, these systems have to be seen from a broader angle, incorporating several other environmental factors such as the organizational structure or human factors. For this reason, the technology cannot be seen as solitary system, but should rather be included in the context of a scenario of work 4.0. These scenarios can help to classify new technologies, their advantages and constraints in order to provide guidance for the digital development of organizations. While several frameworks have been proposed in terms of technological guidance, most of them focus heavily on technology, neglecting their organizational- and human factors. In order to form a uniform understanding of the construct of industry 4.0, we developed an instrument for rating scenarios of work 4.0 on the relevant dimensions 'technology', 'human' and 'organization'. This paper describes the chosen relevant criteria including possible constraints we encountered. Future work on this topic will include the creation of profiles of scenarios of work 4.0, further validation of the criteria."}],"publication_status":"published","place":"New York","_id":"4326","doi":"10.1145/3197768.3201566","user_id":"15514","type":"conference","status":"public","page":"319–326","author":[{"full_name":"Jenderny, Sascha","first_name":"Sascha","last_name":"Jenderny"},{"last_name":"Foullois","full_name":"Foullois, Marc","first_name":"Marc"},{"full_name":"Kato-Beiderwieden, Anna-Lena","last_name":"Kato-Beiderwieden","first_name":"Anna-Lena"},{"first_name":"Michael","full_name":"Bansmann, Michael","last_name":"Bansmann"},{"last_name":"Wöste","first_name":"Lars","full_name":"Wöste, Lars"},{"first_name":"Josefine","last_name":"Lamß","full_name":"Lamß, Josefine"},{"last_name":"Maier","full_name":"Maier, Günter W.","first_name":"Günter W."},{"last_name":"Röcker","id":"61525","full_name":"Röcker, Carsten","first_name":"Carsten"}],"main_file_link":[{"open_access":"1"}],"year":2018,"citation":{"chicago-de":"Jenderny, Sascha, Marc Foullois, Anna-Lena Kato-Beiderwieden, Michael Bansmann, Lars Wöste, Josefine Lamß, Günter W. Maier und Carsten Röcker. 2018. Development of an Instrument for the Assessment of Scenarios of Work 4.0 Based on Socio-Technical Criteria. In: Proceedings of the International Conference on Pervasive Technologies Related to Assistive Environments (PETRA’18). ACM, New York, NY, USA, pp. 319 - 326, 319–326. New York: ACM. doi:10.1145/3197768.3201566, .","din1505-2-1":"Jenderny, Sascha ; Foullois, Marc ; Kato-Beiderwieden, Anna-Lena ; Bansmann, Michael ; Wöste, Lars ; Lamß, Josefine ; Maier, Günter W. ; Röcker, Carsten: Development of an Instrument for the Assessment of Scenarios of Work 4.0 Based on Socio-Technical Criteria. In: Proceedings of the International Conference on Pervasive Technologies Related to Assistive Environments (PETRA’18). ACM, New York, NY, USA, pp. 319 - 326. New York : ACM, 2018, S. 319–326","short":"S. Jenderny, M. Foullois, A.-L. Kato-Beiderwieden, M. Bansmann, L. Wöste, J. Lamß, G.W. Maier, C. Röcker, in: Proceedings of the International Conference on Pervasive Technologies Related to Assistive Environments (PETRA’18). ACM, New York, NY, USA, Pp. 319 - 326, ACM, New York, 2018, pp. 319–326.","ufg":"Jenderny, Sascha et. al. (2018): Development of an Instrument for the Assessment of Scenarios of Work 4.0 Based on Socio-Technical Criteria, in: Proceedings of the International Conference on Pervasive Technologies Related to Assistive Environments (PETRA’18). ACM, New York, NY, USA, pp. 319 - 326, New York, S. 319–326.","havard":"S. Jenderny, M. Foullois, A.-L. Kato-Beiderwieden, M. Bansmann, L. Wöste, J. Lamß, G.W. Maier, C. Röcker, Development of an Instrument for the Assessment of Scenarios of Work 4.0 Based on Socio-Technical Criteria, in: Proceedings of the International Conference on Pervasive Technologies Related to Assistive Environments (PETRA’18). ACM, New York, NY, USA, Pp. 319 - 326, ACM, New York, 2018: pp. 319–326.","mla":"Jenderny, Sascha, et al. “Development of an Instrument for the Assessment of Scenarios of Work 4.0 Based on Socio-Technical Criteria.” Proceedings of the International Conference on Pervasive Technologies Related to Assistive Environments (PETRA’18). ACM, New York, NY, USA, Pp. 319 - 326, ACM, 2018, pp. 319–326, doi:10.1145/3197768.3201566.","bjps":"Jenderny S et al. (2018) Development of an Instrument for the Assessment of Scenarios of Work 4.0 Based on Socio-Technical Criteria. Proceedings of the International Conference on Pervasive Technologies Related to Assistive Environments (PETRA’18). ACM, New York, NY, USA, Pp. 319 - 326. New York: ACM, pp. 319–326.","van":"Jenderny S, Foullois M, Kato-Beiderwieden A-L, Bansmann M, Wöste L, Lamß J, et al. Development of an Instrument for the Assessment of Scenarios of Work 4.0 Based on Socio-Technical Criteria. In: Proceedings of the International Conference on Pervasive Technologies Related to Assistive Environments (PETRA’18) ACM, New York, NY, USA, pp 319 - 326. New York: ACM; 2018. p. 319–326.","ama":"Jenderny S, Foullois M, Kato-Beiderwieden A-L, et al. Development of an Instrument for the Assessment of Scenarios of Work 4.0 Based on Socio-Technical Criteria. In: Proceedings of the International Conference on Pervasive Technologies Related to Assistive Environments (PETRA’18). ACM, New York, NY, USA, Pp. 319 - 326. New York: ACM; 2018:319–326. doi:10.1145/3197768.3201566","chicago":"Jenderny, Sascha, Marc Foullois, Anna-Lena Kato-Beiderwieden, Michael Bansmann, Lars Wöste, Josefine Lamß, Günter W. Maier, and Carsten Röcker. “Development of an Instrument for the Assessment of Scenarios of Work 4.0 Based on Socio-Technical Criteria.” In Proceedings of the International Conference on Pervasive Technologies Related to Assistive Environments (PETRA’18). ACM, New York, NY, USA, Pp. 319 - 326, 319–326. New York: ACM, 2018. https://doi.org/10.1145/3197768.3201566.","apa":"Jenderny, S., Foullois, M., Kato-Beiderwieden, A.-L., Bansmann, M., Wöste, L., Lamß, J., … Röcker, C. (2018). Development of an Instrument for the Assessment of Scenarios of Work 4.0 Based on Socio-Technical Criteria. In Proceedings of the International Conference on Pervasive Technologies Related to Assistive Environments (PETRA’18). ACM, New York, NY, USA, pp. 319 - 326 (pp. 319–326). New York: ACM. https://doi.org/10.1145/3197768.3201566","ieee":"S. Jenderny et al., “Development of an Instrument for the Assessment of Scenarios of Work 4.0 Based on Socio-Technical Criteria,” in Proceedings of the International Conference on Pervasive Technologies Related to Assistive Environments (PETRA’18). ACM, New York, NY, USA, pp. 319 - 326, Corfu, Greece, 2018, pp. 319–326."},"title":"Development of an Instrument for the Assessment of Scenarios of Work 4.0 Based on Socio-Technical Criteria","keyword":["Human-centered computing","Human computer interaction (HCI)","HCI theory","concepts and models"],"language":[{"iso":"eng"}],"oa":"1","date_updated":"2023-03-15T13:49:52Z","publication":"Proceedings of the International Conference on Pervasive Technologies Related to Assistive Environments (PETRA'18). ACM, New York, NY, USA, pp. 319 - 326","publication_identifier":{"isbn":["978-1-4503-6390-7"]},"date_created":"2021-01-08T08:26:28Z"},{"type":"conference","user_id":"45673","place":"Piscataway, NJ","_id":"4327","doi":"10.1109/WFCS.2018.8402380","publication_status":"published","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"start_date":"2018-06-13","end_date":"2018-06-15","name":"14th IEEE International Workshop on Factory Communication Systems (WFCS)","location":"Imperia, Italy "},"abstract":[{"lang":"eng","text":"In ever changing world, the industrial systems become more and more complex. Machine feedback in the form of alarms and notifications, due to its growing volume, becomes overwhelming for the operator. In addition, expectations in relation to system availability are growing as well. Therefore, there exists strong need for new solutions guaranteeing fast troubleshooting of problems that arise during system operation. The approach proposed in this study uses advantages of the Asset Administration Shell, machine learning, and human-machine interaction in order to create the assistance system which holistically addresses the issue of troubleshooting complex industrial systems."}],"publisher":"IEEE","publication":"14th IEEE International Workshop on Factory Communication Systems (WFCS)","publication_identifier":{"eisbn":["978-1-5386-1066-4"]},"date_created":"2021-01-08T08:26:30Z","date_updated":"2023-03-15T13:49:52Z","oa":"1","keyword":["Maintenance engineering","Adaptation models","Machine learning","Data models","Standards","Software","Bayes methods"],"language":[{"iso":"eng"}],"title":"Assistance System to Support Troubleshooting of Complex Industrial Systems","citation":{"ama":"Lang D, Wunderlich P, Heinz M, et al. Assistance System to Support Troubleshooting of Complex Industrial Systems. In: 14th IEEE International Workshop on Factory Communication Systems (WFCS). Piscataway, NJ: IEEE; 2018. doi:10.1109/WFCS.2018.8402380","ieee":"D. Lang et al., “Assistance System to Support Troubleshooting of Complex Industrial Systems,” in 14th IEEE International Workshop on Factory Communication Systems (WFCS), Imperia, Italy , 2018.","short":"D. Lang, P. Wunderlich, M. Heinz, L. Wisniewski, J. Jasperneite, O. Niggemann, C. Röcker, in: 14th IEEE International Workshop on Factory Communication Systems (WFCS), IEEE, Piscataway, NJ, 2018.","chicago-de":"Lang, Dorota, Paul Wunderlich, Mario Heinz, Lukasz Wisniewski, Jürgen Jasperneite, Oliver Niggemann und Carsten Röcker. 2018. Assistance System to Support Troubleshooting of Complex Industrial Systems. In: 14th IEEE International Workshop on Factory Communication Systems (WFCS). Piscataway, NJ: IEEE. doi:10.1109/WFCS.2018.8402380, .","din1505-2-1":"Lang, Dorota ; Wunderlich, Paul ; Heinz, Mario ; Wisniewski, Lukasz ; Jasperneite, Jürgen ; Niggemann, Oliver ; Röcker, Carsten: Assistance System to Support Troubleshooting of Complex Industrial Systems. In: 14th IEEE International Workshop on Factory Communication Systems (WFCS). Piscataway, NJ : IEEE, 2018","van":"Lang D, Wunderlich P, Heinz M, Wisniewski L, Jasperneite J, Niggemann O, et al. Assistance System to Support Troubleshooting of Complex Industrial Systems. In: 14th IEEE International Workshop on Factory Communication Systems (WFCS). Piscataway, NJ: IEEE; 2018.","ufg":"Lang, Dorota et. al. (2018): Assistance System to Support Troubleshooting of Complex Industrial Systems, in: 14th IEEE International Workshop on Factory Communication Systems (WFCS), Piscataway, NJ.","mla":"Lang, Dorota, et al. “Assistance System to Support Troubleshooting of Complex Industrial Systems.” 14th IEEE International Workshop on Factory Communication Systems (WFCS), IEEE, 2018, doi:10.1109/WFCS.2018.8402380.","bjps":"Lang D et al. (2018) Assistance System to Support Troubleshooting of Complex Industrial Systems. 14th IEEE International Workshop on Factory Communication Systems (WFCS). Piscataway, NJ: IEEE.","havard":"D. Lang, P. Wunderlich, M. Heinz, L. Wisniewski, J. Jasperneite, O. Niggemann, C. Röcker, Assistance System to Support Troubleshooting of Complex Industrial Systems, in: 14th IEEE International Workshop on Factory Communication Systems (WFCS), IEEE, Piscataway, NJ, 2018.","apa":"Lang, D., Wunderlich, P., Heinz, M., Wisniewski, L., Jasperneite, J., Niggemann, O., & Röcker, C. (2018). Assistance System to Support Troubleshooting of Complex Industrial Systems. In 14th IEEE International Workshop on Factory Communication Systems (WFCS). Piscataway, NJ: IEEE. https://doi.org/10.1109/WFCS.2018.8402380","chicago":"Lang, Dorota, Paul Wunderlich, Mario Heinz, Lukasz Wisniewski, Jürgen Jasperneite, Oliver Niggemann, and Carsten Röcker. “Assistance System to Support Troubleshooting of Complex Industrial Systems.” In 14th IEEE International Workshop on Factory Communication Systems (WFCS). Piscataway, NJ: IEEE, 2018. https://doi.org/10.1109/WFCS.2018.8402380."},"author":[{"full_name":"Lang, Dorota","id":"68941","first_name":"Dorota","last_name":"Lang"},{"last_name":"Wunderlich","first_name":"Paul","full_name":"Wunderlich, Paul","id":"52317"},{"first_name":"Mario","last_name":"Heinz","id":"68913","full_name":"Heinz, Mario"},{"id":"1710","first_name":"Lukasz","full_name":"Wisniewski, Lukasz","last_name":"Wisniewski"},{"full_name":"Jasperneite, Jürgen","id":"1899","last_name":"Jasperneite","first_name":"Jürgen"},{"id":"10876","first_name":"Oliver","full_name":"Niggemann, Oliver","last_name":"Niggemann"},{"id":"61525","first_name":"Carsten","full_name":"Röcker, Carsten","last_name":"Röcker"}],"main_file_link":[{"open_access":"1"}],"year":2018,"status":"public"},{"keyword":["Additive manufacturing","Embedded optical waveguides","Optical sensors","SLA technology","FLM technology"],"language":[{"iso":"eng"}],"date_updated":"2024-04-19T12:56:30Z","corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"editor":[{"first_name":"Franz-Josef","last_name":"Villmer","full_name":"Villmer, Franz-Josef"},{"full_name":"Padoano, Elio","first_name":"Elio","last_name":"Padoano"}],"publication_identifier":{"isbn":["978-3-946856-03-0"]},"publication":"Production engineering and management : proceedings 8th international conference, October 04 and 05, 2018, Lemgo, Germany","date_created":"2019-02-13T14:29:45Z","status":"public","page":"70-82","author":[{"first_name":"Micha","id":"71403","last_name":"Beyer","full_name":"Beyer, Micha"},{"orcid":"https://orcid.org/0000-0001-7293-6893","first_name":"Oliver","last_name":"Stübbe","full_name":"Stübbe, Oliver","id":"51864"},{"first_name":"Franz-Josef","id":"14290","full_name":"Villmer, Franz-Josef","last_name":"Villmer"}],"year":"2018","citation":{"short":"M. Beyer, O. Stübbe, F.-J. Villmer, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management : Proceedings 8th International Conference, October 04 and 05, 2018, Lemgo, Germany, Lemgo, 2018, pp. 70–82.","din1505-2-1":"Beyer, Micha ; Stübbe, Oliver ; Villmer, Franz-Josef: Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management ; Hochschule Ostwestfalen-Lippe (Hrsg.): Production engineering and management : proceedings 8th international conference, October 04 and 05, 2018, Lemgo, Germany, Publication series in direct digital manufacturing. Lemgo, 2018, S. 70–82","chicago-de":"Beyer, Micha, Oliver Stübbe und Franz-Josef Villmer. 2018. Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications. In: Production engineering and management : proceedings 8th international conference, October 04 and 05, 2018, Lemgo, Germany, hg. von Franz-Josef Villmer, Elio Padoano, Department of Production Engineering and Management, und Hochschule Ostwestfalen-Lippe, 70–82. Publication series in direct digital manufacturing. Lemgo.","ama":"Beyer M, Stübbe O, Villmer FJ. Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications. In: Villmer FJ, Padoano E, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management : Proceedings 8th International Conference, October 04 and 05, 2018, Lemgo, Germany. Publication series in direct digital manufacturing. ; 2018:70-82.","van":"Beyer M, Stübbe O, Villmer FJ. Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications. In: Villmer FJ, Padoano E, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, editors. Production engineering and management : proceedings 8th international conference, October 04 and 05, 2018, Lemgo, Germany. Lemgo; 2018. p. 70–82. (Publication series in direct digital manufacturing).","havard":"M. Beyer, O. Stübbe, F.-J. Villmer, Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management : Proceedings 8th International Conference, October 04 and 05, 2018, Lemgo, Germany, Lemgo, 2018: pp. 70–82.","mla":"Beyer, Micha, et al. “Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications.” Production Engineering and Management : Proceedings 8th International Conference, October 04 and 05, 2018, Lemgo, Germany, edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 70–82.","bjps":"Beyer M, Stübbe O and Villmer F-J (2018) Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications. In Villmer F-J et al. (eds), Production Engineering and Management : Proceedings 8th International Conference, October 04 and 05, 2018, Lemgo, Germany. Lemgo, pp. 70–82.","ufg":"Beyer, Micha/Stübbe, Oliver/Villmer, Franz-Josef: Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications, in: Villmer, Franz-Josef u. a. (Hgg.): Production engineering and management : proceedings 8th international conference, October 04 and 05, 2018, Lemgo, Germany, Lemgo 2018 (Publication series in direct digital manufacturing), S. 70–82.","ieee":"M. Beyer, O. Stübbe, and F.-J. Villmer, “Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications,” in Production engineering and management : proceedings 8th international conference, October 04 and 05, 2018, Lemgo, Germany, Lemgo, 2018, no. 1, pp. 70–82.","apa":"Beyer, M., Stübbe, O., & Villmer, F.-J. (2018). Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications. In F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe (Eds.), Production engineering and management : proceedings 8th international conference, October 04 and 05, 2018, Lemgo, Germany (Issue 1, pp. 70–82).","chicago":"Beyer, Micha, Oliver Stübbe, and Franz-Josef Villmer. “Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications.” In Production Engineering and Management : Proceedings 8th International Conference, October 04 and 05, 2018, Lemgo, Germany, edited by Franz-Josef Villmer, Elio Padoano, Department of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, 70–82. Publication Series in Direct Digital Manufacturing. Lemgo, 2018."},"title":"Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications","place":"Lemgo","_id":"554","user_id":"51864","type":"conference","conference":{"name":"Proceedings 8th International Conference","location":"Lemgo","end_date":"2018-10-05","start_date":"2018-10-04"},"department":[{"_id":"DEP1306"},{"_id":"DEP5000"},{"_id":"DEP5020"},{"_id":"DEP6020"}],"abstract":[{"text":"Light guiding structures, like optical waveguides or fibers, take an important role in several industries, e.g. communication, sensing, illumination or medical applications. For the latter, it could be very interesting to have the possibility to manufacture problem-adapted structureswith a mechanicalfunctionality andwith additional embedded optical or electrical sensor functionalities.Modern additive manufacturing (AM) technologies like Stereolithography (SLA) or Fused Layer Modeling (FLM) may provide these opportunities.This paper is aimedto figure out the light guiding opportunities of both technologies. For this different kind of structures are built by FLM and SLA. To compare both manufacturing technologies, the layout of each structure is identical for both technologies. After manufacturing, the transmission and the attenuation of the guided light of these structures areanalyzed by measurement.Then the measurement results of the different technologies are compared with each other.","lang":"eng"}],"issue":"1","publication_status":"published","series_title":"Publication series in direct digital manufacturing"},{"date_created":"2021-04-19T09:22:07Z","type":"conference","publication":"2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA)","publication_identifier":{"isbn":["9781538671085"]},"date_updated":"2023-03-15T13:50:00Z","user_id":"10982","doi":"10.1109/etfa.2018.8502603","_id":"5592","language":[{"iso":"eng"}],"title":"PKI and User Access Rights Management for OPC UA based Applications","publication_status":"published","citation":{"ieee":"G. Karthikeyan and S. Heiss, “PKI and User Access Rights Management for OPC UA based Applications,” in 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA), 2018.","ama":"Karthikeyan G, Heiss S. PKI and User Access Rights Management for OPC UA based Applications. In: 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA). ; 2018. doi:10.1109/etfa.2018.8502603","apa":"Karthikeyan, G., & Heiss, S. (2018). PKI and User Access Rights Management for OPC UA based Applications. In 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA). https://doi.org/10.1109/etfa.2018.8502603","chicago":"Karthikeyan, Gajasri, and Stefan Heiss. “PKI and User Access Rights Management for OPC UA Based Applications.” In 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA), 2018. https://doi.org/10.1109/etfa.2018.8502603.","van":"Karthikeyan G, Heiss S. PKI and User Access Rights Management for OPC UA based Applications. In: 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA). 2018.","ufg":"Karthikeyan, Gajasri/Heiss, Stefan (2018): PKI and User Access Rights Management for OPC UA based Applications, in: 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA).","havard":"G. Karthikeyan, S. Heiss, PKI and User Access Rights Management for OPC UA based Applications, in: 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA), 2018.","bjps":"Karthikeyan G and Heiss S (2018) PKI and User Access Rights Management for OPC UA Based Applications. 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA).","mla":"Karthikeyan, Gajasri, and Stefan Heiss. “PKI and User Access Rights Management for OPC UA Based Applications.” 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA), 2018, doi:10.1109/etfa.2018.8502603.","short":"G. Karthikeyan, S. Heiss, in: 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA), 2018.","chicago-de":"Karthikeyan, Gajasri und Stefan Heiss. 2018. PKI and User Access Rights Management for OPC UA based Applications. In: 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA). doi:10.1109/etfa.2018.8502603, .","din1505-2-1":"Karthikeyan, Gajasri ; Heiss, Stefan: PKI and User Access Rights Management for OPC UA based Applications. In: 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA), 2018"},"department":[{"_id":"DEP5000"},{"_id":"DEP5023"}],"year":2018,"author":[{"full_name":"Karthikeyan, Gajasri","first_name":"Gajasri","last_name":"Karthikeyan"},{"last_name":"Heiss","first_name":"Stefan","full_name":"Heiss, Stefan","id":"1031"}],"status":"public"},{"title":"Sichere Middleware-Lösungen für die Industrie 4.0 – Eine IT-Sicherheitsanalyse aktueller Kommunikationsansätze","publication_status":"published","citation":{"apa":"Friesen, M., Karthikeyan, G., Wisniewski, L., Heiss, S., Steinke, K., & Niemann, K.-H. (2018). Sichere Middleware-Lösungen für die Industrie 4.0 – Eine IT-Sicherheitsanalyse aktueller Kommunikationsansätze. In Automation 2018. https://doi.org/10.51202/9783181023303-355","ieee":"M. Friesen, G. Karthikeyan, L. Wisniewski, S. Heiss, K. Steinke, and K.-H. Niemann, “Sichere Middleware-Lösungen für die Industrie 4.0 – Eine IT-Sicherheitsanalyse aktueller Kommunikationsansätze,” in Automation 2018, 2018.","chicago":"Friesen, M., G. Karthikeyan, L. Wisniewski, Stefan Heiss, K. Steinke, and K.-H. Niemann. “Sichere Middleware-Lösungen Für Die Industrie 4.0 – Eine IT-Sicherheitsanalyse Aktueller Kommunikationsansätze.” In Automation 2018, 2018. https://doi.org/10.51202/9783181023303-355.","van":"Friesen M, Karthikeyan G, Wisniewski L, Heiss S, Steinke K, Niemann K-H. Sichere Middleware-Lösungen für die Industrie 4.0 – Eine IT-Sicherheitsanalyse aktueller Kommunikationsansätze. In: Automation 2018. 2018.","ama":"Friesen M, Karthikeyan G, Wisniewski L, Heiss S, Steinke K, Niemann K-H. Sichere Middleware-Lösungen für die Industrie 4.0 – Eine IT-Sicherheitsanalyse aktueller Kommunikationsansätze. In: Automation 2018. ; 2018. doi:10.51202/9783181023303-355","ufg":"Friesen, M. et. al. (2018): Sichere Middleware-Lösungen für die Industrie 4.0 – Eine IT-Sicherheitsanalyse aktueller Kommunikationsansätze, in: Automation 2018.","havard":"M. Friesen, G. Karthikeyan, L. Wisniewski, S. Heiss, K. Steinke, K.-H. Niemann, Sichere Middleware-Lösungen für die Industrie 4.0 – Eine IT-Sicherheitsanalyse aktueller Kommunikationsansätze, in: Automation 2018, 2018.","mla":"Friesen, M., et al. “Sichere Middleware-Lösungen Für Die Industrie 4.0 – Eine IT-Sicherheitsanalyse Aktueller Kommunikationsansätze.” Automation 2018, 2018, doi:10.51202/9783181023303-355.","bjps":"Friesen M et al. (2018) Sichere Middleware-Lösungen Für Die Industrie 4.0 – Eine IT-Sicherheitsanalyse Aktueller Kommunikationsansätze. Automation 2018.","short":"M. Friesen, G. Karthikeyan, L. Wisniewski, S. Heiss, K. Steinke, K.-H. Niemann, in: Automation 2018, 2018.","chicago-de":"Friesen, M., G. Karthikeyan, L. Wisniewski, Stefan Heiss, K. Steinke und K.-H. Niemann. 2018. Sichere Middleware-Lösungen für die Industrie 4.0 – Eine IT-Sicherheitsanalyse aktueller Kommunikationsansätze. In: Automation 2018. doi:10.51202/9783181023303-355, .","din1505-2-1":"Friesen, M. ; Karthikeyan, G. ; Wisniewski, L. ; Heiss, Stefan ; Steinke, K. ; Niemann, K.-H.: Sichere Middleware-Lösungen für die Industrie 4.0 – Eine IT-Sicherheitsanalyse aktueller Kommunikationsansätze. In: Automation 2018, 2018"},"department":[{"_id":"DEP5000"},{"_id":"DEP5023"}],"author":[{"last_name":"Friesen","first_name":"M.","full_name":"Friesen, M."},{"full_name":"Karthikeyan, G.","last_name":"Karthikeyan","first_name":"G."},{"full_name":"Wisniewski, L.","last_name":"Wisniewski","first_name":"L."},{"last_name":"Heiss","first_name":"Stefan","id":"1031","full_name":"Heiss, Stefan"},{"full_name":"Steinke, K.","first_name":"K.","last_name":"Steinke"},{"full_name":"Niemann, K.-H.","first_name":"K.-H.","last_name":"Niemann"}],"year":2018,"status":"public","date_created":"2021-04-19T09:22:17Z","type":"book_chapter","publication_identifier":{"isbn":["9783181023303"]},"publication":"Automation 2018","date_updated":"2023-03-15T13:50:00Z","user_id":"10982","doi":"10.51202/9783181023303-355","_id":"5593","language":[{"iso":"eng"}]},{"status":"public","page":"3","year":2018,"main_file_link":[{"open_access":"1","url":"https://www.yumpu.com/de/document/read/63562600/urbanlab-magazin-08-2018-heimat-planen"}],"author":[{"orcid":"0000-0002-8841-9345","id":"58462","first_name":"Marcel","last_name":"Cardinali","full_name":"Cardinali, Marcel"},{"full_name":"Hall, Oliver","id":"27136","first_name":"Oliver","last_name":"Hall"}],"citation":{"short":"M. Cardinali, O. Hall, urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung (2018) 3.","din1505-2-1":"Cardinali, Marcel ; Hall, Oliver: Heimat Planen (Editorial). In: urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung. Detmold, Technische Hochschule Ostwestfalen-Lippe (2018), Nr. 4, S. 3","chicago-de":"Cardinali, Marcel und Oliver Hall. 2018. Heimat Planen (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung, Nr. 4: 3.","apa":"Cardinali, M., & Hall, O. (2018). Heimat Planen (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung, (4), 3.","ieee":"M. Cardinali and O. Hall, “Heimat Planen (Editorial),” urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung, no. 4, p. 3, 2018.","chicago":"Cardinali, Marcel, and Oliver Hall. “Heimat Planen (Editorial).” urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung, no. 4 (2018): 3.","van":"Cardinali M, Hall O. Heimat Planen (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung. 2018;(4):3.","ama":"Cardinali M, Hall O. Heimat Planen (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung. 2018;(4):3.","ufg":"Cardinali, Marcel/Hall, Oliver (2018): Heimat Planen (Editorial), in: urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung (4), S. 3.","havard":"M. Cardinali, O. Hall, Heimat Planen (Editorial), urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung. (2018) 3.","bjps":"Cardinali M and Hall O (2018) Heimat Planen (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung 3.","mla":"Cardinali, Marcel, and Oliver Hall. “Heimat Planen (Editorial).” urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung, no. 4, Technische Hochschule Ostwestfalen-Lippe, 2018, p. 3."},"title":"Heimat Planen (Editorial)","language":[{"iso":"ger"}],"oa":"1","date_updated":"2023-03-15T13:50:01Z","file_date_updated":"2021-04-30T14:50:50Z","publication_identifier":{"unknown":["2566-8900"]},"publication":"urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung","date_created":"2021-04-30T12:42:05Z","publisher":"Technische Hochschule Ostwestfalen-Lippe","ddc":["050"],"department":[{"_id":"DEP1303"},{"_id":"DEP1055"}],"issue":"4","publication_status":"published","file":[{"relation":"main_file","creator":"edu-dd0","date_updated":"2021-04-30T14:50:50Z","file_id":"5752","file_size":563956,"file_name":"Heimat planen (Editorial).pdf","content_type":"application/pdf","date_created":"2021-04-30T14:50:50Z","access_level":"open_access","success":1}],"place":"Detmold","_id":"5748","has_accepted_license":"1","user_id":"45673","popular_science":"1","type":"journal_article"},{"language":[{"iso":"ger"}],"_id":"5762","oa":"1","date_updated":"2024-12-04T13:03:16Z","related_material":{"record":[{"id":"5762","relation":"contains","status":"public"}]},"user_id":"83781","date_created":"2021-04-30T18:21:32Z","type":"journal_article","publication_identifier":{"issn":["2566-8900"],"eissn":["2566-8919 "]},"publication":"UrbanLab Magazin : Fachzeitschrift für Stadt- & Quartiersplanung (UrbanLab Magazin : Fachzeitschrift für Stadt- & Regionalplanung)","page":"108-111","status":"public","publisher":" Hochschule Ostwestfalen-Lippe / Institut für Designstrategien","department":[{"_id":"DEP1055"},{"_id":"DEP1025"},{"_id":"DEP1028"}],"author":[{"full_name":"Dally, Benjamin","last_name":"Dally","id":"56914","first_name":"Benjamin"},{"first_name":"Axel","last_name":"Häusler","id":"61520","full_name":"Häusler, Axel","orcid":"0009-0001-8565-8199"}],"main_file_link":[{"url":"https://www.yumpu.com/de/document/read/63562629/urbanlab-magazin-03-2018-regionale-netzwerke","open_access":"1"}],"year":"2018","publication_status":"published","citation":{"short":"B. Dally, A. Häusler, UrbanLab Magazin : Fachzeitschrift für Stadt- & Quartiersplanung (UrbanLab Magazin : Fachzeitschrift für Stadt- & Regionalplanung) (2018) 108–111.","din1505-2-1":"Dally, Benjamin ; Häusler, Axel: Digitale Netzwerke der Region. In: UrbanLab Magazin : Fachzeitschrift für Stadt- & Quartiersplanung (UrbanLab Magazin : Fachzeitschrift für Stadt- & Regionalplanung), Hochschule Ostwestfalen-Lippe / Institut für Designstrategien (2018), S. 108–111","chicago-de":"Dally, Benjamin und Axel Häusler. 2018. Digitale Netzwerke der Region. UrbanLab Magazin : Fachzeitschrift für Stadt- & Quartiersplanung (UrbanLab Magazin : Fachzeitschrift für Stadt- & Regionalplanung): 108–111.","apa":"Dally, B., & Häusler, A. (2018). Digitale Netzwerke der Region. UrbanLab Magazin : Fachzeitschrift für Stadt- & Quartiersplanung (UrbanLab Magazin : Fachzeitschrift für Stadt- & Regionalplanung), 108–111.","chicago":"Dally, Benjamin, and Axel Häusler. “Digitale Netzwerke der Region.” UrbanLab Magazin : Fachzeitschrift für Stadt- & Quartiersplanung (UrbanLab Magazin : Fachzeitschrift für Stadt- & Regionalplanung), 2018, 108–11.","van":"Dally B, Häusler A. Digitale Netzwerke der Region. UrbanLab Magazin : Fachzeitschrift für Stadt- & Quartiersplanung (UrbanLab Magazin : Fachzeitschrift für Stadt- & Regionalplanung). 2018;108–11.","ufg":"Dally, Benjamin/Häusler, Axel: Digitale Netzwerke der Region, in: UrbanLab Magazin : Fachzeitschrift für Stadt- & Quartiersplanung (UrbanLab Magazin : Fachzeitschrift für Stadt- & Regionalplanung) (2018), S. 108–111.","bjps":"Dally B and Häusler A (2018) Digitale Netzwerke der Region. UrbanLab Magazin : Fachzeitschrift für Stadt- & Quartiersplanung (UrbanLab Magazin : Fachzeitschrift für Stadt- & Regionalplanung) 108–111.","havard":"B. Dally, A. Häusler, Digitale Netzwerke der Region, UrbanLab Magazin : Fachzeitschrift für Stadt- & Quartiersplanung (UrbanLab Magazin : Fachzeitschrift für Stadt- & Regionalplanung). (2018) 108–111.","mla":"Dally, Benjamin, and Axel Häusler. “Digitale Netzwerke der Region.” UrbanLab Magazin : Fachzeitschrift für Stadt- & Quartiersplanung (UrbanLab Magazin : Fachzeitschrift für Stadt- & Regionalplanung), 2018, pp. 108–11.","ieee":"B. Dally and A. Häusler, “Digitale Netzwerke der Region,” UrbanLab Magazin : Fachzeitschrift für Stadt- & Quartiersplanung (UrbanLab Magazin : Fachzeitschrift für Stadt- & Regionalplanung), pp. 108–111, 2018.","ama":"Dally B, Häusler A. Digitale Netzwerke der Region. UrbanLab Magazin : Fachzeitschrift für Stadt- & Quartiersplanung (UrbanLab Magazin : Fachzeitschrift für Stadt- & Regionalplanung). Published online 2018:108-111."},"title":"Digitale Netzwerke der Region"},{"page":"187 -195","status":"public","quality_controlled":"1","conference":{"end_date":"2018-08-31","start_date":"2018-08-28","name":"15th International DOCOMOMO Conference","location":"Ljubljana, Slovenia"},"department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"author":[{"orcid":"0000-0002-6962-5223","full_name":"Dragutinovic, Anica","id":"68875","last_name":"Dragutinovic","first_name":"Anica"},{"orcid":"0000-0002-8594-3168","full_name":"Pottgiesser, Uta","first_name":"Uta","last_name":"Pottgiesser","id":"27166"},{"first_name":"Els","last_name":"De Vos","full_name":"De Vos, Els"}],"year":2018,"publication_status":"published","citation":{"ama":"Dragutinovic A, Pottgiesser U, De Vos E. (UN-)sustainability of the concrete mega-blocks in New Belgrade: Potentials of prefabricated modern structures for transformation. In: Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018. ; 2018:187-195.","ieee":"A. Dragutinovic, U. Pottgiesser, and E. De Vos, “(UN-)sustainability of the concrete mega-blocks in New Belgrade: Potentials of prefabricated modern structures for transformation,” in Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018, Ljubljana, Slovenia, 2018, pp. 187–195.","din1505-2-1":"Dragutinovic, Anica ; Pottgiesser, Uta ; De Vos, Els: (UN-)sustainability of the concrete mega-blocks in New Belgrade: Potentials of prefabricated modern structures for transformation. In: Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018, 2018, S. 187–195","chicago-de":"Dragutinovic, Anica, Uta Pottgiesser und Els De Vos. 2018. (UN-)sustainability of the concrete mega-blocks in New Belgrade: Potentials of prefabricated modern structures for transformation. In: Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018, 187–195.","short":"A. Dragutinovic, U. Pottgiesser, E. De Vos, in: Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018, 2018, pp. 187–195.","ufg":"Dragutinovic, Anica et. al. (2018): (UN-)sustainability of the concrete mega-blocks in New Belgrade: Potentials of prefabricated modern structures for transformation, in: Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018, S. 187–195.","bjps":"Dragutinovic A, Pottgiesser U and De Vos E (2018) (UN-)Sustainability of the Concrete Mega-Blocks in New Belgrade: Potentials of Prefabricated Modern Structures for Transformation. Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018. pp. 187–195.","mla":"Dragutinovic, Anica, et al. “(UN-)Sustainability of the Concrete Mega-Blocks in New Belgrade: Potentials of Prefabricated Modern Structures for Transformation.” Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018, 2018, pp. 187–95.","havard":"A. Dragutinovic, U. Pottgiesser, E. De Vos, (UN-)sustainability of the concrete mega-blocks in New Belgrade: Potentials of prefabricated modern structures for transformation, in: Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018, 2018: pp. 187–195.","van":"Dragutinovic A, Pottgiesser U, De Vos E. (UN-)sustainability of the concrete mega-blocks in New Belgrade: Potentials of prefabricated modern structures for transformation. In: Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018. 2018. p. 187–95.","chicago":"Dragutinovic, Anica, Uta Pottgiesser, and Els De Vos. “(UN-)Sustainability of the Concrete Mega-Blocks in New Belgrade: Potentials of Prefabricated Modern Structures for Transformation.” In Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018, 187–95, 2018.","apa":"Dragutinovic, A., Pottgiesser, U., & De Vos, E. (2018). (UN-)sustainability of the concrete mega-blocks in New Belgrade: Potentials of prefabricated modern structures for transformation. In Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018 (pp. 187–195). Ljubljana, Slovenia."},"title":"(UN-)sustainability of the concrete mega-blocks in New Belgrade: Potentials of prefabricated modern structures for transformation","language":[{"iso":"eng"}],"_id":"5809","date_updated":"2023-03-15T13:50:02Z","user_id":"45673","date_created":"2021-03-03T10:45:39Z","type":"conference","publication":"Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018"},{"publication_status":"published","citation":{"havard":"A. Häusler, Digitale Mobilität – Neue Chancen für den ländlichen Raum, in: Universität Siegen (Ed.), 2018.","mla":"Häusler, Axel. Digitale Mobilität – Neue Chancen für den ländlichen Raum. Edited by Universität Siegen, 2018.","bjps":"Häusler A (2018) Digitale Mobilität – Neue Chancen für den ländlichen Raum. In Universität Siegen (ed.).","ufg":"Häusler, Axel: Digitale Mobilität – Neue Chancen für den ländlichen Raum, in: Universität Siegen (Hg.): o. O. 2018.","ama":"Häusler A. Digitale Mobilität – Neue Chancen für den ländlichen Raum. In: Universität Siegen, ed. ; 2018.","van":"Häusler A. Digitale Mobilität – Neue Chancen für den ländlichen Raum. In: Universität Siegen, editor. 2018.","chicago":"Häusler, Axel. “Digitale Mobilität – Neue Chancen für den ländlichen Raum.” edited by Universität Siegen, 2018.","ieee":"A. Häusler, “Digitale Mobilität – Neue Chancen für den ländlichen Raum,” Siegen, 2018.","apa":"Häusler, A. (2018). Digitale Mobilität – Neue Chancen für den ländlichen Raum (Universität Siegen, Ed.).","chicago-de":"Häusler, Axel. 2018. Digitale Mobilität – Neue Chancen für den ländlichen Raum. In: , hg. von Universität Siegen.","din1505-2-1":"Häusler, Axel: Digitale Mobilität – Neue Chancen für den ländlichen Raum. In: Universität Siegen (Hrsg.): , 2018","short":"A. Häusler, in: Universität Siegen (Ed.), 2018."},"title":"Digitale Mobilität – Neue Chancen für den ländlichen Raum","status":"public","conference":{"end_date":"2018-06-29","start_date":"2018-06-28","name":"Symposium \"Neue Wege braucht das Land\"","location":"Siegen"},"department":[{"_id":"DEP1055"},{"_id":"DEP1025"},{"_id":"DEP1028"}],"author":[{"orcid":"0009-0001-8565-8199","id":"61520","first_name":"Axel","full_name":"Häusler, Axel","last_name":"Häusler"}],"year":"2018","corporate_editor":["Universität Siegen"],"date_updated":"2024-12-04T13:06:08Z","user_id":"83781","date_created":"2021-05-12T11:56:25Z","type":"conference","_id":"5872","language":[{"iso":"ger"}]},{"status":"public","conference":{"name":"2. mFUND-Konferenz","location":"Berlin","start_date":"2018-10-16","end_date":"2018-10-17"},"department":[{"_id":"DEP1055"},{"_id":"DEP1025"},{"_id":"DEP1028"}],"author":[{"orcid":"0009-0001-8565-8199","first_name":"Axel","last_name":"Häusler","full_name":"Häusler, Axel","id":"61520"}],"year":"2018","publication_status":"published","citation":{"apa":"Häusler, A. (2018). STEMPICOM - Spatiotemporal Intelligence for Community based Services. In Bundesministerium für Verkehr und digitale Infrastruktur (Ed.), Daten als Motor für die Mobilität 4.0.","chicago":"Häusler, Axel. “STEMPICOM - Spatiotemporal Intelligence for Community Based Services.” In Daten Als Motor Für Die Mobilität 4.0, edited by Bundesministerium für Verkehr und digitale Infrastruktur , 2018.","van":"Häusler A. STEMPICOM - Spatiotemporal Intelligence for Community based Services. In: Bundesministerium für Verkehr und digitale Infrastruktur , editor. Daten als Motor für die Mobilität 40. 2018.","ufg":"Häusler, Axel: STEMPICOM - Spatiotemporal Intelligence for Community based Services, in: Bundesministerium für Verkehr und digitale Infrastruktur (Hg.): Daten als Motor für die Mobilität 4.0, o. O. 2018.","mla":"Häusler, Axel. “STEMPICOM - Spatiotemporal Intelligence for Community Based Services.” Daten Als Motor Für Die Mobilität 4.0, edited by Bundesministerium für Verkehr und digitale Infrastruktur , 2018.","bjps":"Häusler A (2018) STEMPICOM - Spatiotemporal Intelligence for Community Based Services. In Bundesministerium für Verkehr und digitale Infrastruktur (ed.), Daten Als Motor Für Die Mobilität 4.0.","havard":"A. Häusler, STEMPICOM - Spatiotemporal Intelligence for Community based Services, in: Bundesministerium für Verkehr und digitale Infrastruktur (Ed.), Daten Als Motor Für Die Mobilität 4.0, 2018.","short":"A. Häusler, in: Bundesministerium für Verkehr und digitale Infrastruktur (Ed.), Daten Als Motor Für Die Mobilität 4.0, 2018.","chicago-de":"Häusler, Axel. 2018. STEMPICOM - Spatiotemporal Intelligence for Community based Services. In: Daten als Motor für die Mobilität 4.0, hg. von Bundesministerium für Verkehr und digitale Infrastruktur .","din1505-2-1":"Häusler, Axel: STEMPICOM - Spatiotemporal Intelligence for Community based Services. In: Bundesministerium für Verkehr und digitale Infrastruktur (Hrsg.): Daten als Motor für die Mobilität 4.0, 2018","ieee":"A. Häusler, “STEMPICOM - Spatiotemporal Intelligence for Community based Services,” in Daten als Motor für die Mobilität 4.0, Berlin, 2018.","ama":"Häusler A. STEMPICOM - Spatiotemporal Intelligence for Community based Services. In: Bundesministerium für Verkehr und digitale Infrastruktur , ed. Daten Als Motor Für Die Mobilität 4.0. ; 2018."},"title":"STEMPICOM - Spatiotemporal Intelligence for Community based Services","language":[{"iso":"eng"}],"_id":"5873","alternative_title":["Räumliche Verflechtungen als transkommunale Infrastruktur"],"date_updated":"2024-12-04T13:07:10Z","user_id":"83781","corporate_editor":["Bundesministerium für Verkehr und digitale Infrastruktur "],"type":"conference","date_created":"2021-05-12T12:09:30Z","publication":"Daten als Motor für die Mobilität 4.0"},{"citation":{"din1505-2-1":"Häusler, Axel: nextPlaces: Daten sehen und Räume verstehen. In: Innovationszentrum Lippe (Hrsg.): , 2018","chicago-de":"Häusler, Axel. 2018. nextPlaces: Daten sehen und Räume verstehen. In: , hg. von Innovationszentrum Lippe.","short":"A. Häusler, in: Innovationszentrum Lippe (Ed.), 2018.","chicago":"Häusler, Axel. “NextPlaces: Daten Sehen Und Räume Verstehen.” edited by Innovationszentrum Lippe, 2018.","apa":"Häusler, A. (2018). nextPlaces: Daten sehen und Räume verstehen (Innovationszentrum Lippe, Ed.).","ufg":"Häusler, Axel: nextPlaces: Daten sehen und Räume verstehen, in: Innovationszentrum Lippe (Hg.): o. O. 2018.","havard":"A. Häusler, nextPlaces: Daten sehen und Räume verstehen, in: Innovationszentrum Lippe (Ed.), 2018.","bjps":"Häusler A (2018) NextPlaces: Daten Sehen Und Räume Verstehen. In Innovationszentrum Lippe (ed.).","mla":"Häusler, Axel. NextPlaces: Daten Sehen Und Räume Verstehen. Edited by Innovationszentrum Lippe, 2018.","van":"Häusler A. nextPlaces: Daten sehen und Räume verstehen. In: Innovationszentrum Lippe, editor. 2018.","ieee":"A. Häusler, “nextPlaces: Daten sehen und Räume verstehen,” Dörentrup, 2018.","ama":"Häusler A. nextPlaces: Daten sehen und Räume verstehen. In: Innovationszentrum Lippe, ed. ; 2018."},"title":"nextPlaces: Daten sehen und Räume verstehen","status":"public","department":[{"_id":"DEP1055"},{"_id":"DEP1025"},{"_id":"DEP1028"}],"conference":{"name":"Smart Country Side","location":"Dörentrup"},"year":"2018","author":[{"orcid":"0009-0001-8565-8199","first_name":"Axel","last_name":"Häusler","full_name":"Häusler, Axel","id":"61520"}],"date_updated":"2024-12-04T13:07:39Z","user_id":"83781","corporate_editor":["Innovationszentrum Lippe"],"date_created":"2021-05-12T12:16:58Z","type":"conference","language":[{"iso":"eng"}],"_id":"5874"},{"title":"Digital Transformation Management","publication_status":"published","citation":{"ieee":"A. Häusler, “Digital Transformation Management,” in DIE - Deutsches Institut für Entwicklungszusammenarbeit , Bonn, 2018.","ama":"Häusler A. Digital Transformation Management. In: Digital Transformation Management, ed. DIE - Deutsches Institut Für Entwicklungszusammenarbeit . ; 2018.","short":"A. Häusler, in: Digital Transformation Management (Ed.), DIE - Deutsches Institut Für Entwicklungszusammenarbeit , 2018.","din1505-2-1":"Häusler, Axel: Digital Transformation Management. In: Digital Transformation Management (Hrsg.): DIE - Deutsches Institut für Entwicklungszusammenarbeit , 2018","chicago-de":"Häusler, Axel. 2018. Digital Transformation Management. In: DIE - Deutsches Institut für Entwicklungszusammenarbeit , hg. von Digital Transformation Management.","apa":"Häusler, A. (2018). Digital Transformation Management. In Digital Transformation Management (Ed.), DIE - Deutsches Institut für Entwicklungszusammenarbeit .","chicago":"Häusler, Axel. “Digital Transformation Management.” In DIE - Deutsches Institut Für Entwicklungszusammenarbeit , edited by Digital Transformation Management, 2018.","van":"Häusler A. Digital Transformation Management. In: Digital Transformation Management, editor. DIE - Deutsches Institut für Entwicklungszusammenarbeit . 2018.","ufg":"Häusler, Axel: Digital Transformation Management, in: Digital Transformation Management (Hg.): DIE - Deutsches Institut für Entwicklungszusammenarbeit , o. O. 2018.","havard":"A. Häusler, Digital Transformation Management, in: Digital Transformation Management (Ed.), DIE - Deutsches Institut Für Entwicklungszusammenarbeit , 2018.","bjps":"Häusler A (2018) Digital Transformation Management. In Digital Transformation Management (ed.), DIE - Deutsches Institut Für Entwicklungszusammenarbeit .","mla":"Häusler, Axel. “Digital Transformation Management.” DIE - Deutsches Institut Für Entwicklungszusammenarbeit , edited by Digital Transformation Management, 2018."},"conference":{"name":"International Workshop","location":"Bonn"},"department":[{"_id":"DEP1055"},{"_id":"DEP1025"},{"_id":"DEP1028"}],"year":"2018","author":[{"orcid":"0009-0001-8565-8199","full_name":"Häusler, Axel","first_name":"Axel","last_name":"Häusler","id":"61520"}],"status":"public","type":"conference","date_created":"2021-05-13T19:55:03Z","publication":"DIE - Deutsches Institut für Entwicklungszusammenarbeit ","date_updated":"2024-12-04T13:08:10Z","user_id":"83781","corporate_editor":["Digital Transformation Management"],"language":[{"iso":"eng"}],"_id":"5892"},{"date_updated":"2024-04-19T11:49:25Z","editor":[{"full_name":"von Freymann, Georg","first_name":"Georg","last_name":"von Freymann"},{"last_name":"Herkommer","first_name":"Alois M.","full_name":"Herkommer, Alois M."},{"last_name":"Flury","first_name":"Manuel","full_name":"Flury, Manuel"}],"date_created":"2024-02-29T17:21:32Z","publication":"3D Printed Optics and Additive Photonic Manufacturing","publication_identifier":{"eisbn":["978-1-5106-1877-0"],"unknown":["978-1-5106-1876-3"],"issn":["0277-786X"],"eissn":["1996-756X"]},"language":[{"iso":"eng"}],"volume":10675,"citation":{"ufg":"Stübbe, Oliver/Huxol, Andrea/Villmer, Franz-Josef: Applying fused layer modeling technologies to print embedded 3D optical waveguide structures for communication and sensor applications, Bd. 10675, hg. von Freymann, Georg von/Herkommer, Alois M./Flury, Manuel, o. O. 2018 (Proceedings of SPIE).","bjps":"Stübbe O, Huxol A and Villmer F-J (2018) Applying Fused Layer Modeling Technologies to Print Embedded 3D Optical Waveguide Structures for Communication and Sensor Applications, von Freymann G, Herkommer AM and Flury M (eds). SPIE.","havard":"O. Stübbe, A. Huxol, F.-J. Villmer, Applying fused layer modeling technologies to print embedded 3D optical waveguide structures for communication and sensor applications, SPIE, 2018.","mla":"Stübbe, Oliver, et al. “Applying Fused Layer Modeling Technologies to Print Embedded 3D Optical Waveguide Structures for Communication and Sensor Applications.” 3D Printed Optics and Additive Photonic Manufacturing, edited by Georg von Freymann et al., vol. 10675, SPIE, 2018, https://doi.org/10.1117/12.2306910.","van":"Stübbe O, Huxol A, Villmer FJ. Applying fused layer modeling technologies to print embedded 3D optical waveguide structures for communication and sensor applications. von Freymann G, Herkommer AM, Flury M, editors. 3D Printed Optics and Additive Photonic Manufacturing. SPIE; 2018. (Proceedings of SPIE; vol. 10675).","ama":"Stübbe O, Huxol A, Villmer FJ. Applying Fused Layer Modeling Technologies to Print Embedded 3D Optical Waveguide Structures for Communication and Sensor Applications. Vol 10675. (von Freymann G, Herkommer AM, Flury M, eds.). SPIE; 2018. doi:10.1117/12.2306910","chicago":"Stübbe, Oliver, Andrea Huxol, and Franz-Josef Villmer. Applying Fused Layer Modeling Technologies to Print Embedded 3D Optical Waveguide Structures for Communication and Sensor Applications. Edited by Georg von Freymann, Alois M. Herkommer, and Manuel Flury. 3D Printed Optics and Additive Photonic Manufacturing. Vol. 10675. Proceedings of SPIE. SPIE, 2018. https://doi.org/10.1117/12.2306910.","apa":"Stübbe, O., Huxol, A., & Villmer, F.-J. (2018). Applying fused layer modeling technologies to print embedded 3D optical waveguide structures for communication and sensor applications. In G. von Freymann, A. M. Herkommer, & M. Flury (Eds.), 3D Printed Optics and Additive Photonic Manufacturing (Vol. 10675). SPIE. https://doi.org/10.1117/12.2306910","ieee":"O. Stübbe, A. Huxol, and F.-J. Villmer, Applying fused layer modeling technologies to print embedded 3D optical waveguide structures for communication and sensor applications, vol. 10675. SPIE, 2018. doi: 10.1117/12.2306910.","chicago-de":"Stübbe, Oliver, Andrea Huxol und Franz-Josef Villmer. 2018. Applying fused layer modeling technologies to print embedded 3D optical waveguide structures for communication and sensor applications. Hg. von Georg von Freymann, Alois M. Herkommer, und Manuel Flury. 3D Printed Optics and Additive Photonic Manufacturing. Bd. 10675. Proceedings of SPIE. SPIE. doi:10.1117/12.2306910, .","din1505-2-1":"Stübbe, Oliver ; Huxol, Andrea ; Villmer, Franz-Josef ; von Freymann, G. ; Herkommer, A. M. ; Flury, M. (Hrsg.): Applying fused layer modeling technologies to print embedded 3D optical waveguide structures for communication and sensor applications, Proceedings of SPIE. Bd. 10675 : SPIE, 2018","short":"O. Stübbe, A. Huxol, F.-J. Villmer, Applying Fused Layer Modeling Technologies to Print Embedded 3D Optical Waveguide Structures for Communication and Sensor Applications, SPIE, 2018."},"title":"Applying fused layer modeling technologies to print embedded 3D optical waveguide structures for communication and sensor applications","status":"public","year":"2018","author":[{"full_name":"Stübbe, Oliver","first_name":"Oliver","last_name":"Stübbe","id":"51864","orcid":"https://orcid.org/0000-0001-7293-6893"},{"full_name":"Huxol, Andrea","first_name":"Andrea","last_name":"Huxol","id":"43559"},{"first_name":"Franz-Josef","full_name":"Villmer, Franz-Josef","last_name":"Villmer","id":"14290"}],"user_id":"51864","intvolume":" 10675","type":"conference_editor_article","doi":"10.1117/12.2306910","_id":"11134","publication_status":"published","series_title":"Proceedings of SPIE","publisher":"SPIE","conference":{"name":"SPIE Photonics Europe","location":"Strasbourg, France","end_date":"2018-04-26","start_date":"2018-04-22"},"department":[{"_id":"DEP5020"},{"_id":"DEP6020"}]},{"_id":"4787","language":[{"iso":"eng"}],"user_id":"68554","date_updated":"2023-03-15T13:49:55Z","publication":"23th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)","date_created":"2021-02-02T08:22:28Z","type":"conference","status":"public","year":2018,"author":[{"id":"58885","first_name":"Andreas","full_name":"Bunte, Andreas","last_name":"Bunte"},{"full_name":"Niggemann, Oliver","first_name":"Oliver","last_name":"Niggemann","id":"10876"},{"first_name":"Benno","last_name":"Stein","full_name":"Stein, Benno"}],"department":[{"_id":"DEP5023"}],"citation":{"ama":"Bunte A, Niggemann O, Stein B. Integrating OWL Ontologies for Smart Services into AutomationML and OPC UA. In: 23th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). ; 2018.","van":"Bunte A, Niggemann O, Stein B. Integrating OWL Ontologies for Smart Services into AutomationML and OPC UA. In: 23th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). 2018.","mla":"Bunte, Andreas, et al. “Integrating OWL Ontologies for Smart Services into AutomationML and OPC UA.” 23th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2018.","bjps":"Bunte A, Niggemann O and Stein B (2018) Integrating OWL Ontologies for Smart Services into AutomationML and OPC UA. 23th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA).","havard":"A. Bunte, O. Niggemann, B. Stein, Integrating OWL Ontologies for Smart Services into AutomationML and OPC UA, in: 23th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2018.","ufg":"Bunte, Andreas et. al. (2018): Integrating OWL Ontologies for Smart Services into AutomationML and OPC UA, in: 23th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA).","ieee":"A. Bunte, O. Niggemann, and B. Stein, “Integrating OWL Ontologies for Smart Services into AutomationML and OPC UA,” in 23th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2018.","apa":"Bunte, A., Niggemann, O., & Stein, B. (2018). Integrating OWL Ontologies for Smart Services into AutomationML and OPC UA. In 23th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA).","chicago":"Bunte, Andreas, Oliver Niggemann, and Benno Stein. “Integrating OWL Ontologies for Smart Services into AutomationML and OPC UA.” In 23th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2018.","short":"A. Bunte, O. Niggemann, B. Stein, in: 23th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2018.","chicago-de":"Bunte, Andreas, Oliver Niggemann und Benno Stein. 2018. Integrating OWL Ontologies for Smart Services into AutomationML and OPC UA. In: 23th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA).","din1505-2-1":"Bunte, Andreas ; Niggemann, Oliver ; Stein, Benno: Integrating OWL Ontologies for Smart Services into AutomationML and OPC UA. In: 23th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2018"},"title":"Integrating OWL Ontologies for Smart Services into AutomationML and OPC UA"},{"title":"Mapping Data Sets to Concepts Using Machine Learning and a Knowledge Based Approach","citation":{"chicago-de":"Bunte, Andreas, Peng Li und Oliver Niggemann. 2018. Mapping Data Sets to Concepts Using Machine Learning and a Knowledge Based Approach. In: International Conference on Agents and Artificial Intelligence (ICAART). Madeira, Portugal: SCITEPRESS.","din1505-2-1":"Bunte, Andreas ; Li, Peng ; Niggemann, Oliver: Mapping Data Sets to Concepts Using Machine Learning and a Knowledge Based Approach. In: International Conference on Agents and Artificial Intelligence (ICAART). Madeira, Portugal : SCITEPRESS, 2018","short":"A. Bunte, P. Li, O. Niggemann, in: International Conference on Agents and Artificial Intelligence (ICAART), SCITEPRESS, Madeira, Portugal, 2018.","mla":"Bunte, Andreas, et al. “Mapping Data Sets to Concepts Using Machine Learning and a Knowledge Based Approach.” International Conference on Agents and Artificial Intelligence (ICAART), SCITEPRESS, 2018.","bjps":"Bunte A, Li P and Niggemann O (2018) Mapping Data Sets to Concepts Using Machine Learning and a Knowledge Based Approach. International Conference on Agents and Artificial Intelligence (ICAART). Madeira, Portugal: SCITEPRESS.","havard":"A. Bunte, P. Li, O. Niggemann, Mapping Data Sets to Concepts Using Machine Learning and a Knowledge Based Approach, in: International Conference on Agents and Artificial Intelligence (ICAART), SCITEPRESS, Madeira, Portugal, 2018.","ufg":"Bunte, Andreas et. al. (2018): Mapping Data Sets to Concepts Using Machine Learning and a Knowledge Based Approach, in: International Conference on Agents and Artificial Intelligence (ICAART), Madeira, Portugal.","van":"Bunte A, Li P, Niggemann O. Mapping Data Sets to Concepts Using Machine Learning and a Knowledge Based Approach. In: International Conference on Agents and Artificial Intelligence (ICAART). Madeira, Portugal: SCITEPRESS; 2018.","chicago":"Bunte, Andreas, Peng Li, and Oliver Niggemann. “Mapping Data Sets to Concepts Using Machine Learning and a Knowledge Based Approach.” In International Conference on Agents and Artificial Intelligence (ICAART). Madeira, Portugal: SCITEPRESS, 2018.","apa":"Bunte, A., Li, P., & Niggemann, O. (2018). Mapping Data Sets to Concepts Using Machine Learning and a Knowledge Based Approach. In International Conference on Agents and Artificial Intelligence (ICAART). Madeira, Portugal: SCITEPRESS.","ama":"Bunte A, Li P, Niggemann O. Mapping Data Sets to Concepts Using Machine Learning and a Knowledge Based Approach. In: International Conference on Agents and Artificial Intelligence (ICAART). Madeira, Portugal: SCITEPRESS; 2018.","ieee":"A. Bunte, P. Li, and O. Niggemann, “Mapping Data Sets to Concepts Using Machine Learning and a Knowledge Based Approach,” in International Conference on Agents and Artificial Intelligence (ICAART), 2018."},"department":[{"_id":"DEP5023"}],"author":[{"first_name":"Andreas","last_name":"Bunte","full_name":"Bunte, Andreas","id":"58885"},{"first_name":"Peng","id":"58937","full_name":"Li, Peng","last_name":"Li"},{"full_name":"Niggemann, Oliver","id":"10876","first_name":"Oliver","last_name":"Niggemann"}],"year":2018,"status":"public","publisher":"SCITEPRESS","date_created":"2021-02-02T08:23:30Z","type":"conference","publication":"International Conference on Agents and Artificial Intelligence (ICAART)","date_updated":"2023-03-15T13:49:55Z","user_id":"68554","language":[{"iso":"eng"}],"place":"Madeira, Portugal","_id":"4788"},{"citation":{"short":"J. Jasperneite, in: 2018.","din1505-2-1":"Jasperneite, Jürgen: Lemgo Digital als IoT Real-Labor für die Digitale Stadt. In: , 2018","chicago-de":"Jasperneite, Jürgen. 2018. Lemgo Digital als IoT Real-Labor für die Digitale Stadt. In: .","apa":"Jasperneite, J. (2018). Lemgo Digital als IoT Real-Labor für die Digitale Stadt. Presented at the nextPLACE Konferenz “Netzwerke der digitalen Region,” Detmold.","ieee":"J. Jasperneite, “Lemgo Digital als IoT Real-Labor für die Digitale Stadt,” presented at the nextPLACE Konferenz “Netzwerke der digitalen Region,” Detmold, 2018.","chicago":"Jasperneite, Jürgen. “Lemgo Digital Als IoT Real-Labor Für Die Digitale Stadt,” 2018.","van":"Jasperneite J. Lemgo Digital als IoT Real-Labor für die Digitale Stadt. In 2018.","ama":"Jasperneite J. Lemgo Digital als IoT Real-Labor für die Digitale Stadt. In: ; 2018.","ufg":"Jasperneite, Jürgen (2018): Lemgo Digital als IoT Real-Labor für die Digitale Stadt, in: .","havard":"J. Jasperneite, Lemgo Digital als IoT Real-Labor für die Digitale Stadt, in: 2018.","bjps":"Jasperneite J (2018) Lemgo Digital Als IoT Real-Labor Für Die Digitale Stadt.","mla":"Jasperneite, Jürgen. Lemgo Digital Als IoT Real-Labor Für Die Digitale Stadt. 2018."},"title":"Lemgo Digital als IoT Real-Labor für die Digitale Stadt","status":"public","conference":{"name":"nextPLACE Konferenz \"Netzwerke der digitalen Region\"","location":"Detmold"},"department":[{"_id":"DEP5019"},{"_id":"DEP5023"}],"year":2018,"author":[{"last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"}],"date_updated":"2023-03-15T13:49:56Z","user_id":"45673","date_created":"2021-02-02T12:20:23Z","type":"conference","_id":"4833","language":[{"iso":"eng"}]},{"_id":"4834","language":[{"iso":"eng"}],"place":"Berlin, Heidelberg","type":"book_chapter","date_created":"2021-02-02T12:24:31Z","publication":"Kommunikation und Bildverarbeitung in der Automation. Technologien für die intelligente Automation ","editor":[{"orcid":"https://orcid.org/0000-0002-3325-7887","last_name":"Lohweg","full_name":"Lohweg, Volker","id":"1804","first_name":"Volker"},{"full_name":"Jasperneite, Jürgen","id":"1899","first_name":"Jürgen","last_name":"Jasperneite"}],"date_updated":"2023-03-15T13:49:56Z","user_id":"45673","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2018,"author":[{"last_name":"Lessmann","first_name":"Gunnar","full_name":"Lessmann, Gunnar"},{"last_name":"Schneider","full_name":"Schneider, Daniel","first_name":"Daniel"},{"full_name":"Flatt, Holger","last_name":"Flatt","id":"58494","first_name":"Holger"},{"first_name":"Sebastian","last_name":"Schriegel","full_name":"Schriegel, Sebastian"},{"last_name":"Jasperneite","first_name":"Jürgen","full_name":"Jasperneite, Jürgen","id":"1899"}],"publisher":"Springer Vieweg","status":"public","title":"Modellbasierter Entwurfsassistent zur Auslegung Spezifischer Architektur- und Konfigurationseigenschaften von Kommunikationsnetzen mit Echtzeitanforderungen","series_title":"Technologies for Intelligent Automation","citation":{"ieee":"G. Lessmann, D. Schneider, H. Flatt, S. Schriegel, and J. Jasperneite, “Modellbasierter Entwurfsassistent zur Auslegung Spezifischer Architektur- und Konfigurationseigenschaften von Kommunikationsnetzen mit Echtzeitanforderungen,” in Kommunikation und Bildverarbeitung in der Automation. Technologien für die intelligente Automation , V. Lohweg and J. Jasperneite, Eds. Berlin, Heidelberg: Springer Vieweg, 2018.","ama":"Lessmann G, Schneider D, Flatt H, Schriegel S, Jasperneite J. Modellbasierter Entwurfsassistent zur Auslegung Spezifischer Architektur- und Konfigurationseigenschaften von Kommunikationsnetzen mit Echtzeitanforderungen. In: Lohweg V, Jasperneite J, eds. Kommunikation Und Bildverarbeitung in Der Automation. Technologien Für Die Intelligente Automation . Technologies for Intelligent Automation. Berlin, Heidelberg: Springer Vieweg; 2018.","apa":"Lessmann, G., Schneider, D., Flatt, H., Schriegel, S., & Jasperneite, J. (2018). Modellbasierter Entwurfsassistent zur Auslegung Spezifischer Architektur- und Konfigurationseigenschaften von Kommunikationsnetzen mit Echtzeitanforderungen. In V. Lohweg & J. Jasperneite (Eds.), Kommunikation und Bildverarbeitung in der Automation. Technologien für die intelligente Automation . Berlin, Heidelberg: Springer Vieweg.","chicago":"Lessmann, Gunnar, Daniel Schneider, Holger Flatt, Sebastian Schriegel, and Jürgen Jasperneite. “Modellbasierter Entwurfsassistent Zur Auslegung Spezifischer Architektur- Und Konfigurationseigenschaften von Kommunikationsnetzen Mit Echtzeitanforderungen.” In Kommunikation Und Bildverarbeitung in Der Automation. Technologien Für Die Intelligente Automation , edited by Volker Lohweg and Jürgen Jasperneite. Technologies for Intelligent Automation. Berlin, Heidelberg: Springer Vieweg, 2018.","van":"Lessmann G, Schneider D, Flatt H, Schriegel S, Jasperneite J. Modellbasierter Entwurfsassistent zur Auslegung Spezifischer Architektur- und Konfigurationseigenschaften von Kommunikationsnetzen mit Echtzeitanforderungen. In: Lohweg V, Jasperneite J, editors. Kommunikation und Bildverarbeitung in der Automation Technologien für die intelligente Automation . Berlin, Heidelberg: Springer Vieweg; 2018. (Technologies for Intelligent Automation).","mla":"Lessmann, Gunnar, et al. “Modellbasierter Entwurfsassistent Zur Auslegung Spezifischer Architektur- Und Konfigurationseigenschaften von Kommunikationsnetzen Mit Echtzeitanforderungen.” Kommunikation Und Bildverarbeitung in Der Automation. Technologien Für Die Intelligente Automation , edited by Volker Lohweg and Jürgen Jasperneite, Springer Vieweg, 2018.","bjps":"Lessmann G et al. (2018) Modellbasierter Entwurfsassistent Zur Auslegung Spezifischer Architektur- Und Konfigurationseigenschaften von Kommunikationsnetzen Mit Echtzeitanforderungen. In Lohweg V and Jasperneite J (eds), Kommunikation Und Bildverarbeitung in Der Automation. Technologien Für Die Intelligente Automation . Berlin, Heidelberg: Springer Vieweg.","havard":"G. Lessmann, D. Schneider, H. Flatt, S. Schriegel, J. Jasperneite, Modellbasierter Entwurfsassistent zur Auslegung Spezifischer Architektur- und Konfigurationseigenschaften von Kommunikationsnetzen mit Echtzeitanforderungen, in: V. Lohweg, J. Jasperneite (Eds.), Kommunikation Und Bildverarbeitung in Der Automation. Technologien Für Die Intelligente Automation , Springer Vieweg, Berlin, Heidelberg, 2018.","ufg":"Lessmann, Gunnar et. al. (2018): Modellbasierter Entwurfsassistent zur Auslegung Spezifischer Architektur- und Konfigurationseigenschaften von Kommunikationsnetzen mit Echtzeitanforderungen, in: Volker Lohweg/Jürgen Jasperneite (Hgg.): Kommunikation und Bildverarbeitung in der Automation. Technologien für die intelligente Automation (=Technologies for Intelligent Automation), Berlin, Heidelberg.","short":"G. Lessmann, D. Schneider, H. Flatt, S. Schriegel, J. Jasperneite, in: V. Lohweg, J. Jasperneite (Eds.), Kommunikation Und Bildverarbeitung in Der Automation. Technologien Für Die Intelligente Automation , Springer Vieweg, Berlin, Heidelberg, 2018.","chicago-de":"Lessmann, Gunnar, Daniel Schneider, Holger Flatt, Sebastian Schriegel und Jürgen Jasperneite. 2018. Modellbasierter Entwurfsassistent zur Auslegung Spezifischer Architektur- und Konfigurationseigenschaften von Kommunikationsnetzen mit Echtzeitanforderungen. In: Kommunikation und Bildverarbeitung in der Automation. Technologien für die intelligente Automation , hg. von Volker Lohweg und Jürgen Jasperneite. Technologies for Intelligent Automation. Berlin, Heidelberg: Springer Vieweg.","din1505-2-1":"Lessmann, Gunnar ; Schneider, Daniel ; Flatt, Holger ; Schriegel, Sebastian ; Jasperneite, Jürgen: Modellbasierter Entwurfsassistent zur Auslegung Spezifischer Architektur- und Konfigurationseigenschaften von Kommunikationsnetzen mit Echtzeitanforderungen. In: Lohweg, V. ; Jasperneite, J. (Hrsg.): Kommunikation und Bildverarbeitung in der Automation. Technologien für die intelligente Automation , Technologies for Intelligent Automation. Berlin, Heidelberg : Springer Vieweg, 2018"}},{"user_id":"45673","date_updated":"2023-03-15T13:49:56Z","date_created":"2021-02-02T12:25:57Z","type":"conference","_id":"4835","language":[{"iso":"eng"}],"citation":{"apa":"Jasperneite, J. (2018). SmartFactoryOWL – Empowering our partners for the Digital Age. Presented at the China Center for Information Technologies, Beijing.","ieee":"J. Jasperneite, “SmartFactoryOWL – Empowering our partners for the Digital Age,” presented at the China Center for Information Technologies, Beijing, 2018.","chicago":"Jasperneite, Jürgen. “SmartFactoryOWL – Empowering Our Partners for the Digital Age,” 2018.","van":"Jasperneite J. SmartFactoryOWL – Empowering our partners for the Digital Age. In 2018.","ama":"Jasperneite J. SmartFactoryOWL – Empowering our partners for the Digital Age. In: ; 2018.","ufg":"Jasperneite, Jürgen (2018): SmartFactoryOWL – Empowering our partners for the Digital Age, in: .","bjps":"Jasperneite J (2018) SmartFactoryOWL – Empowering Our Partners for the Digital Age.","havard":"J. Jasperneite, SmartFactoryOWL – Empowering our partners for the Digital Age, in: 2018.","mla":"Jasperneite, Jürgen. SmartFactoryOWL – Empowering Our Partners for the Digital Age. 2018.","short":"J. Jasperneite, in: 2018.","chicago-de":"Jasperneite, Jürgen. 2018. SmartFactoryOWL – Empowering our partners for the Digital Age. In: .","din1505-2-1":"Jasperneite, Jürgen: SmartFactoryOWL – Empowering our partners for the Digital Age. In: , 2018"},"title":"SmartFactoryOWL – Empowering our partners for the Digital Age","status":"public","year":2018,"author":[{"id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"}],"conference":{"location":"Beijing","name":"China Center for Information Technologies"},"department":[{"_id":"DEP5019"},{"_id":"DEP5023"}]},{"editor":[{"last_name":"Schröder","first_name":"Sven","full_name":"Schröder, Sven"},{"full_name":"Geyl, Roland","first_name":"Roland","last_name":"Geyl"}],"date_updated":"2024-03-21T10:02:55Z","date_created":"2021-02-02T12:28:38Z","publication_identifier":{"isbn":["978-1-5106-1921-0"],"eissn":["0277-786X"],"eisbn":["978-1-5106-1922-7"],"issn":["0277-786X "]},"publication":"Optical Fabrication, Testing, and Metrology VI","language":[{"iso":"eng"}],"citation":{"chicago-de":"Schneider, Daniel, Holger Flatt, Jürgen Jasperneite und Oliver Stübbe. 2018. Analysis of industrial production environments and derivation of a novel channel model towards optical wireless communication. In: Optical Fabrication, Testing, and Metrology VI, hg. von Sven Schröder und Roland Geyl, 10692:. Proceedings of SPIE. doi:https://doi.org/10.1117/12.2312102, .","din1505-2-1":"Schneider, Daniel ; Flatt, Holger ; Jasperneite, Jürgen ; Stübbe, Oliver: Analysis of industrial production environments and derivation of a novel channel model towards optical wireless communication. In: Schröder, S. ; Geyl, R. (Hrsg.): Optical Fabrication, Testing, and Metrology VI, Proceedings of SPIE. Bd. 10692, 2018","short":"D. Schneider, H. Flatt, J. Jasperneite, O. Stübbe, in: S. Schröder, R. Geyl (Eds.), Optical Fabrication, Testing, and Metrology VI, 2018.","chicago":"Schneider, Daniel, Holger Flatt, Jürgen Jasperneite, and Oliver Stübbe. “Analysis of Industrial Production Environments and Derivation of a Novel Channel Model towards Optical Wireless Communication.” In Optical Fabrication, Testing, and Metrology VI, edited by Sven Schröder and Roland Geyl, Vol. 10692. Proceedings of SPIE, 2018. https://doi.org/10.1117/12.2312102.","ieee":"D. Schneider, H. Flatt, J. Jasperneite, and O. Stübbe, “Analysis of industrial production environments and derivation of a novel channel model towards optical wireless communication,” in Optical Fabrication, Testing, and Metrology VI, Frankfurt, 2018, vol. 10692. doi: https://doi.org/10.1117/12.2312102.","apa":"Schneider, D., Flatt, H., Jasperneite, J., & Stübbe, O. (2018). Analysis of industrial production environments and derivation of a novel channel model towards optical wireless communication. In S. Schröder & R. Geyl (Eds.), Optical Fabrication, Testing, and Metrology VI (Vol. 10692). https://doi.org/10.1117/12.2312102","havard":"D. Schneider, H. Flatt, J. Jasperneite, O. Stübbe, Analysis of industrial production environments and derivation of a novel channel model towards optical wireless communication, in: S. Schröder, R. Geyl (Eds.), Optical Fabrication, Testing, and Metrology VI, 2018.","bjps":"Schneider D et al. (2018) Analysis of Industrial Production Environments and Derivation of a Novel Channel Model towards Optical Wireless Communication. In Schröder S and Geyl R (eds), Optical Fabrication, Testing, and Metrology VI, vol. 10692.","mla":"Schneider, Daniel, et al. “Analysis of Industrial Production Environments and Derivation of a Novel Channel Model towards Optical Wireless Communication.” Optical Fabrication, Testing, and Metrology VI, edited by Sven Schröder and Roland Geyl, vol. 10692, 2018, https://doi.org/10.1117/12.2312102.","ufg":"Schneider, Daniel u. a.: Analysis of industrial production environments and derivation of a novel channel model towards optical wireless communication, in: Schröder, Sven/Geyl, Roland (Hgg.): Optical Fabrication, Testing, and Metrology VI, Bd. 10692, o. O. 2018 (Proceedings of SPIE).","ama":"Schneider D, Flatt H, Jasperneite J, Stübbe O. Analysis of industrial production environments and derivation of a novel channel model towards optical wireless communication. In: Schröder S, Geyl R, eds. Optical Fabrication, Testing, and Metrology VI. Vol 10692. Proceedings of SPIE. ; 2018. doi:https://doi.org/10.1117/12.2312102","van":"Schneider D, Flatt H, Jasperneite J, Stübbe O. Analysis of industrial production environments and derivation of a novel channel model towards optical wireless communication. In: Schröder S, Geyl R, editors. Optical Fabrication, Testing, and Metrology VI. 2018. (Proceedings of SPIE; vol. 10692)."},"volume":10692,"title":"Analysis of industrial production environments and derivation of a novel channel model towards optical wireless communication","status":"public","author":[{"first_name":"Daniel","full_name":"Schneider, Daniel","last_name":"Schneider","id":"82849"},{"first_name":"Holger","last_name":"Flatt","id":"58494","full_name":"Flatt, Holger"},{"id":"1899","last_name":"Jasperneite","first_name":"Jürgen","full_name":"Jasperneite, Jürgen"},{"last_name":"Stübbe","first_name":"Oliver","full_name":"Stübbe, Oliver","id":"51864","orcid":"https://orcid.org/0000-0001-7293-6893"}],"year":"2018","intvolume":" 10692","user_id":"51864","type":"conference","doi":"https://doi.org/10.1117/12.2312102","_id":"4836","publication_status":"published","series_title":"Proceedings of SPIE","abstract":[{"lang":"eng","text":"Today radio based wireless communication technologies offer limited performance, whereas optical wireless com- munication systems (OWC) propose potentially a high performant, scalable communication system conforming to real time conditions. However, current studies imply, that OWCs still lack the necessary performance and robustness level for most wireless applications in industrial production environments. In this approach several types of noises for free-space optical communication systems are empirically analysed in an accredited, exemplary industrial production environment. While the channel noise is usually modelled by the signal to noise ratio it is found that real environments cannot be approximated by the usual static additive white gaussian noise. In this approach the accumulated measurement data represents the spectrum variation of different locations and times relating to different types of noise sources. The implementation in a total channel model allows the optimization of OWC designs like the channel access scheme or the modulation type concerning performance and robustness. Furthermore an additional measurement setup is proposed, capable of measuring and classifying existing noise sources in order to serve the design of OWC systems in industrial production environments."}],"conference":{"end_date":"2018-05-17","start_date":"2018-05-14","location":"Frankfurt","name":"SPIE Optical Systems design "},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"},{"_id":"DEP5020"}]},{"citation":{"ama":"Schriegel S, Kobzan T, Jasperneite J. Investigation on a Distributed SDN Control Plane Architecture for Heterogeneous Time Sensitive Networks. In: ; 2018.","ieee":"S. Schriegel, T. Kobzan, and J. Jasperneite, “Investigation on a Distributed SDN Control Plane Architecture for Heterogeneous Time Sensitive Networks,” presented at the 14th IEEE International Workshop on Factory Communication Systems (WFCS 2018 ), Imperia, Italy, 2018.","van":"Schriegel S, Kobzan T, Jasperneite J. Investigation on a Distributed SDN Control Plane Architecture for Heterogeneous Time Sensitive Networks. In 2018.","havard":"S. Schriegel, T. Kobzan, J. Jasperneite, Investigation on a Distributed SDN Control Plane Architecture for Heterogeneous Time Sensitive Networks, in: 2018.","bjps":"Schriegel S, Kobzan T and Jasperneite J (2018) Investigation on a Distributed SDN Control Plane Architecture for Heterogeneous Time Sensitive Networks.","mla":"Schriegel, Sebastian, et al. Investigation on a Distributed SDN Control Plane Architecture for Heterogeneous Time Sensitive Networks. 2018.","ufg":"Schriegel, Sebastian et. al. (2018): Investigation on a Distributed SDN Control Plane Architecture for Heterogeneous Time Sensitive Networks, in: .","apa":"Schriegel, S., Kobzan, T., & Jasperneite, J. (2018). Investigation on a Distributed SDN Control Plane Architecture for Heterogeneous Time Sensitive Networks. Presented at the 14th IEEE International Workshop on Factory Communication Systems (WFCS 2018 ), Imperia, Italy.","chicago":"Schriegel, Sebastian, Thomas Kobzan, and Jürgen Jasperneite. “Investigation on a Distributed SDN Control Plane Architecture for Heterogeneous Time Sensitive Networks,” 2018.","short":"S. Schriegel, T. Kobzan, J. Jasperneite, in: 2018.","chicago-de":"Schriegel, Sebastian, Thomas Kobzan und Jürgen Jasperneite. 2018. Investigation on a Distributed SDN Control Plane Architecture for Heterogeneous Time Sensitive Networks. In: .","din1505-2-1":"Schriegel, Sebastian ; Kobzan, Thomas ; Jasperneite, Jürgen: Investigation on a Distributed SDN Control Plane Architecture for Heterogeneous Time Sensitive Networks. In: , 2018"},"title":"Investigation on a Distributed SDN Control Plane Architecture for Heterogeneous Time Sensitive Networks","status":"public","conference":{"name":"14th IEEE International Workshop on Factory Communication Systems (WFCS 2018 )","location":"Imperia, Italy"},"department":[{"_id":"DEP5019"},{"_id":"DEP5023"}],"year":2018,"author":[{"first_name":"Sebastian","full_name":"Schriegel, Sebastian","last_name":"Schriegel"},{"last_name":"Kobzan","full_name":"Kobzan, Thomas","first_name":"Thomas"},{"full_name":"Jasperneite, Jürgen","first_name":"Jürgen","id":"1899","last_name":"Jasperneite"}],"date_updated":"2023-03-15T13:49:56Z","user_id":"45673","type":"conference","date_created":"2021-02-02T12:31:01Z","language":[{"iso":"eng"}],"_id":"4837"},{"conference":{"location":"Imperia, Italy","name":"14th IEEE International Workshop on Factory Communication Systems, WFCS 2018 "},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"id":"61915","first_name":"Arne","full_name":"Neumann, Arne","last_name":"Neumann"},{"last_name":"Wisniewski","first_name":"Lukasz","id":"1710","full_name":"Wisniewski, Lukasz"},{"first_name":"Jürgen","last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen"},{"full_name":"Rost, Peter","last_name":"Rost","first_name":"Peter"},{"full_name":"Ganesan, Rakash SivaSiva","last_name":"Ganesan","first_name":"Rakash SivaSiva"}],"year":2018,"status":"public","title":"Towards Integration of Industrial Ethernet with 5G Mobile Networks","citation":{"mla":"Neumann, Arne, et al. Towards Integration of Industrial Ethernet with 5G Mobile Networks. 2018.","bjps":"Neumann A et al. (2018) Towards Integration of Industrial Ethernet with 5G Mobile Networks.","havard":"A. Neumann, L. Wisniewski, J. Jasperneite, P. Rost, R.S. Ganesan, Towards Integration of Industrial Ethernet with 5G Mobile Networks, in: 2018.","ufg":"Neumann, Arne et. al. (2018): Towards Integration of Industrial Ethernet with 5G Mobile Networks, in: .","van":"Neumann A, Wisniewski L, Jasperneite J, Rost P, Ganesan RS. Towards Integration of Industrial Ethernet with 5G Mobile Networks. In 2018.","chicago":"Neumann, Arne, Lukasz Wisniewski, Jürgen Jasperneite, Peter Rost, and Rakash SivaSiva Ganesan. “Towards Integration of Industrial Ethernet with 5G Mobile Networks,” 2018.","apa":"Neumann, A., Wisniewski, L., Jasperneite, J., Rost, P., & Ganesan, R. S. (2018). Towards Integration of Industrial Ethernet with 5G Mobile Networks. Presented at the 14th IEEE International Workshop on Factory Communication Systems, WFCS 2018 , Imperia, Italy.","chicago-de":"Neumann, Arne, Lukasz Wisniewski, Jürgen Jasperneite, Peter Rost und Rakash SivaSiva Ganesan. 2018. Towards Integration of Industrial Ethernet with 5G Mobile Networks. In: .","din1505-2-1":"Neumann, Arne ; Wisniewski, Lukasz ; Jasperneite, Jürgen ; Rost, Peter ; Ganesan, Rakash SivaSiva: Towards Integration of Industrial Ethernet with 5G Mobile Networks. In: , 2018","short":"A. Neumann, L. Wisniewski, J. Jasperneite, P. Rost, R.S. Ganesan, in: 2018.","ama":"Neumann A, Wisniewski L, Jasperneite J, Rost P, Ganesan RS. Towards Integration of Industrial Ethernet with 5G Mobile Networks. In: ; 2018.","ieee":"A. Neumann, L. Wisniewski, J. Jasperneite, P. Rost, and R. S. Ganesan, “Towards Integration of Industrial Ethernet with 5G Mobile Networks,” presented at the 14th IEEE International Workshop on Factory Communication Systems, WFCS 2018 , Imperia, Italy, 2018."},"language":[{"iso":"eng"}],"_id":"4838","type":"conference","date_created":"2021-02-02T12:34:19Z","date_updated":"2023-03-15T13:49:56Z","user_id":"45673"},{"status":"public","department":[{"_id":"DEP5019"},{"_id":"DEP5023"}],"conference":{"name":"14th IEEE International Workshop on Factory Communication Systems (WFCS) "},"year":2018,"author":[{"first_name":"Dominik","id":"52007","last_name":"Henneke","full_name":"Henneke, Dominik"},{"full_name":"Brozmann, Alex","first_name":"Alex","id":"47836","last_name":"Brozmann"},{"id":"1710","last_name":"Wisniewski","full_name":"Wisniewski, Lukasz","first_name":"Lukasz"},{"id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen","last_name":"Jasperneite"}],"citation":{"chicago-de":"Henneke, Dominik, Alex Brozmann, Lukasz Wisniewski und Jürgen Jasperneite. 2018. Leveraging OPC-UA Discovery by Software-defined Networking and Network Function Virtualization. In: .","din1505-2-1":"Henneke, Dominik ; Brozmann, Alex ; Wisniewski, Lukasz ; Jasperneite, Jürgen: Leveraging OPC-UA Discovery by Software-defined Networking and Network Function Virtualization. In: , 2018","short":"D. Henneke, A. Brozmann, L. Wisniewski, J. Jasperneite, in: 2018.","mla":"Henneke, Dominik, et al. Leveraging OPC-UA Discovery by Software-Defined Networking and Network Function Virtualization. 2018.","havard":"D. Henneke, A. Brozmann, L. Wisniewski, J. Jasperneite, Leveraging OPC-UA Discovery by Software-defined Networking and Network Function Virtualization, in: 2018.","bjps":"Henneke D et al. (2018) Leveraging OPC-UA Discovery by Software-Defined Networking and Network Function Virtualization.","ufg":"Henneke, Dominik et. al. (2018): Leveraging OPC-UA Discovery by Software-defined Networking and Network Function Virtualization, in: .","van":"Henneke D, Brozmann A, Wisniewski L, Jasperneite J. Leveraging OPC-UA Discovery by Software-defined Networking and Network Function Virtualization. In 2018.","chicago":"Henneke, Dominik, Alex Brozmann, Lukasz Wisniewski, and Jürgen Jasperneite. “Leveraging OPC-UA Discovery by Software-Defined Networking and Network Function Virtualization,” 2018.","apa":"Henneke, D., Brozmann, A., Wisniewski, L., & Jasperneite, J. (2018). Leveraging OPC-UA Discovery by Software-defined Networking and Network Function Virtualization. Presented at the 14th IEEE International Workshop on Factory Communication Systems (WFCS) .","ama":"Henneke D, Brozmann A, Wisniewski L, Jasperneite J. Leveraging OPC-UA Discovery by Software-defined Networking and Network Function Virtualization. In: ; 2018.","ieee":"D. Henneke, A. Brozmann, L. Wisniewski, and J. Jasperneite, “Leveraging OPC-UA Discovery by Software-defined Networking and Network Function Virtualization,” presented at the 14th IEEE International Workshop on Factory Communication Systems (WFCS) , 2018."},"title":"Leveraging OPC-UA Discovery by Software-defined Networking and Network Function Virtualization","_id":"4839","language":[{"iso":"eng"}],"date_updated":"2023-03-15T13:49:56Z","user_id":"45673","date_created":"2021-02-02T12:36:20Z","type":"conference"},{"language":[{"iso":"eng"}],"_id":"4840","date_created":"2021-02-02T12:38:28Z","type":"conference","user_id":"45673","date_updated":"2023-03-15T13:49:56Z","author":[{"first_name":"Marco","id":"61562","last_name":"Ehrlich","full_name":"Ehrlich, Marco"},{"id":"1710","first_name":"Lukasz","last_name":"Wisniewski","full_name":"Wisniewski, Lukasz"},{"last_name":"Trsek","first_name":"Henning","id":"1486","full_name":"Trsek, Henning"},{"first_name":"Jürgen","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","id":"1899"}],"year":2018,"conference":{"location":"Imperia (Italien)","name":"14th IEEE International Workshop on Factory Communication Systems (WFCS)"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public","title":"Modelling and Automatic Mapping of Cyber Security Requirements for Industrial Applications: Survey, Problem Exposition, and Research Focus","citation":{"chicago":"Ehrlich, Marco, Lukasz Wisniewski, Henning Trsek, and Jürgen Jasperneite. “Modelling and Automatic Mapping of Cyber Security Requirements for Industrial Applications: Survey, Problem Exposition, and Research Focus,” 2018.","apa":"Ehrlich, M., Wisniewski, L., Trsek, H., & Jasperneite, J. (2018). Modelling and Automatic Mapping of Cyber Security Requirements for Industrial Applications: Survey, Problem Exposition, and Research Focus. Presented at the 14th IEEE International Workshop on Factory Communication Systems (WFCS), Imperia (Italien).","havard":"M. Ehrlich, L. Wisniewski, H. Trsek, J. Jasperneite, Modelling and Automatic Mapping of Cyber Security Requirements for Industrial Applications: Survey, Problem Exposition, and Research Focus, in: 2018.","mla":"Ehrlich, Marco, et al. Modelling and Automatic Mapping of Cyber Security Requirements for Industrial Applications: Survey, Problem Exposition, and Research Focus. 2018.","bjps":"Ehrlich M et al. (2018) Modelling and Automatic Mapping of Cyber Security Requirements for Industrial Applications: Survey, Problem Exposition, and Research Focus.","ufg":"Ehrlich, Marco et. al. (2018): Modelling and Automatic Mapping of Cyber Security Requirements for Industrial Applications: Survey, Problem Exposition, and Research Focus, in: .","van":"Ehrlich M, Wisniewski L, Trsek H, Jasperneite J. Modelling and Automatic Mapping of Cyber Security Requirements for Industrial Applications: Survey, Problem Exposition, and Research Focus. In 2018.","din1505-2-1":"Ehrlich, Marco ; Wisniewski, Lukasz ; Trsek, Henning ; Jasperneite, Jürgen: Modelling and Automatic Mapping of Cyber Security Requirements for Industrial Applications: Survey, Problem Exposition, and Research Focus. In: , 2018","chicago-de":"Ehrlich, Marco, Lukasz Wisniewski, Henning Trsek und Jürgen Jasperneite. 2018. Modelling and Automatic Mapping of Cyber Security Requirements for Industrial Applications: Survey, Problem Exposition, and Research Focus. In: .","short":"M. Ehrlich, L. Wisniewski, H. Trsek, J. Jasperneite, in: 2018.","ieee":"M. Ehrlich, L. Wisniewski, H. Trsek, and J. Jasperneite, “Modelling and Automatic Mapping of Cyber Security Requirements for Industrial Applications: Survey, Problem Exposition, and Research Focus,” presented at the 14th IEEE International Workshop on Factory Communication Systems (WFCS), Imperia (Italien), 2018.","ama":"Ehrlich M, Wisniewski L, Trsek H, Jasperneite J. Modelling and Automatic Mapping of Cyber Security Requirements for Industrial Applications: Survey, Problem Exposition, and Research Focus. In: ; 2018."}},{"date_created":"2021-02-02T12:41:24Z","type":"conference","user_id":"45673","date_updated":"2023-03-15T13:49:56Z","_id":"4841","language":[{"iso":"eng"}],"title":"Reliability-oriented Multipath Communication for Internet-based Cyber-physical Systems","citation":{"ieee":"M. Elattar, M. Friesen, D. Henneke, and J. Jasperneite, “Reliability-oriented Multipath Communication for Internet-based Cyber-physical Systems,” presented at the 14th IEEE International Workshop on Factory Communication Systems, Imperia, Italy, 2018.","ama":"Elattar M, Friesen M, Henneke D, Jasperneite J. Reliability-oriented Multipath Communication for Internet-based Cyber-physical Systems. In: ; 2018.","apa":"Elattar, M., Friesen, M., Henneke, D., & Jasperneite, J. (2018). Reliability-oriented Multipath Communication for Internet-based Cyber-physical Systems. Presented at the 14th IEEE International Workshop on Factory Communication Systems, Imperia, Italy.","chicago":"Elattar, Mohammad, Maxim Friesen, Dominik Henneke, and Jürgen Jasperneite. “Reliability-Oriented Multipath Communication for Internet-Based Cyber-Physical Systems,” 2018.","van":"Elattar M, Friesen M, Henneke D, Jasperneite J. Reliability-oriented Multipath Communication for Internet-based Cyber-physical Systems. In 2018.","bjps":"Elattar M et al. (2018) Reliability-Oriented Multipath Communication for Internet-Based Cyber-Physical Systems.","mla":"Elattar, Mohammad, et al. Reliability-Oriented Multipath Communication for Internet-Based Cyber-Physical Systems. 2018.","havard":"M. Elattar, M. Friesen, D. Henneke, J. Jasperneite, Reliability-oriented Multipath Communication for Internet-based Cyber-physical Systems, in: 2018.","ufg":"Elattar, Mohammad et. al. (2018): Reliability-oriented Multipath Communication for Internet-based Cyber-physical Systems, in: .","short":"M. Elattar, M. Friesen, D. Henneke, J. Jasperneite, in: 2018.","din1505-2-1":"Elattar, Mohammad ; Friesen, Maxim ; Henneke, Dominik ; Jasperneite, Jürgen: Reliability-oriented Multipath Communication for Internet-based Cyber-physical Systems. In: , 2018","chicago-de":"Elattar, Mohammad, Maxim Friesen, Dominik Henneke und Jürgen Jasperneite. 2018. Reliability-oriented Multipath Communication for Internet-based Cyber-physical Systems. In: ."},"author":[{"last_name":"Elattar","id":"58263","first_name":"Mohammad","full_name":"Elattar, Mohammad"},{"id":"61517","full_name":"Friesen, Maxim","first_name":"Maxim","last_name":"Friesen"},{"first_name":"Dominik","last_name":"Henneke","id":"52007","full_name":"Henneke, Dominik"},{"id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen","last_name":"Jasperneite"}],"year":2018,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"name":"14th IEEE International Workshop on Factory Communication Systems","location":"Imperia, Italy"},"status":"public"},{"user_id":"45673","date_updated":"2023-03-15T13:49:56Z","type":"conference","date_created":"2021-02-02T12:44:50Z","language":[{"iso":"eng"}],"_id":"4842","citation":{"din1505-2-1":"Lang, Dorota ; Friesen, Maxim ; Ehrlich, Marco ; Wisniewski, Lukasz ; Jasperneite, Jürgen: Pursuing the Vision of Industrie 4.0: Secure Plug and Produce by Means of the Asset Administration Shell and Blockchain Technology. In: , 2018","chicago-de":"Lang, Dorota, Maxim Friesen, Marco Ehrlich, Lukasz Wisniewski und Jürgen Jasperneite. 2018. Pursuing the Vision of Industrie 4.0: Secure Plug and Produce by Means of the Asset Administration Shell and Blockchain Technology. In: .","short":"D. Lang, M. Friesen, M. Ehrlich, L. Wisniewski, J. Jasperneite, in: 2018.","chicago":"Lang, Dorota, Maxim Friesen, Marco Ehrlich, Lukasz Wisniewski, and Jürgen Jasperneite. “Pursuing the Vision of Industrie 4.0: Secure Plug and Produce by Means of the Asset Administration Shell and Blockchain Technology,” 2018.","apa":"Lang, D., Friesen, M., Ehrlich, M., Wisniewski, L., & Jasperneite, J. (2018). Pursuing the Vision of Industrie 4.0: Secure Plug and Produce by Means of the Asset Administration Shell and Blockchain Technology. Presented at the 16th IEEE International Conference on Industrial Informatics, INDIN 2018 , Porto, Portugal.","ieee":"D. Lang, M. Friesen, M. Ehrlich, L. Wisniewski, and J. Jasperneite, “Pursuing the Vision of Industrie 4.0: Secure Plug and Produce by Means of the Asset Administration Shell and Blockchain Technology,” presented at the 16th IEEE International Conference on Industrial Informatics, INDIN 2018 , Porto, Portugal, 2018.","ufg":"Lang, Dorota et. al. (2018): Pursuing the Vision of Industrie 4.0: Secure Plug and Produce by Means of the Asset Administration Shell and Blockchain Technology, in: .","mla":"Lang, Dorota, et al. Pursuing the Vision of Industrie 4.0: Secure Plug and Produce by Means of the Asset Administration Shell and Blockchain Technology. 2018.","havard":"D. Lang, M. Friesen, M. Ehrlich, L. Wisniewski, J. Jasperneite, Pursuing the Vision of Industrie 4.0: Secure Plug and Produce by Means of the Asset Administration Shell and Blockchain Technology, in: 2018.","bjps":"Lang D et al. (2018) Pursuing the Vision of Industrie 4.0: Secure Plug and Produce by Means of the Asset Administration Shell and Blockchain Technology.","van":"Lang D, Friesen M, Ehrlich M, Wisniewski L, Jasperneite J. Pursuing the Vision of Industrie 4.0: Secure Plug and Produce by Means of the Asset Administration Shell and Blockchain Technology. In 2018.","ama":"Lang D, Friesen M, Ehrlich M, Wisniewski L, Jasperneite J. Pursuing the Vision of Industrie 4.0: Secure Plug and Produce by Means of the Asset Administration Shell and Blockchain Technology. In: ; 2018."},"title":"Pursuing the Vision of Industrie 4.0: Secure Plug and Produce by Means of the Asset Administration Shell and Blockchain Technology","status":"public","year":2018,"author":[{"first_name":"Dorota","full_name":"Lang, Dorota","last_name":"Lang","id":"49801"},{"first_name":"Maxim","last_name":"Friesen","full_name":"Friesen, Maxim","id":"61517"},{"last_name":"Ehrlich","first_name":"Marco","full_name":"Ehrlich, Marco","id":"61562"},{"full_name":"Wisniewski, Lukasz","first_name":"Lukasz","id":"1710","last_name":"Wisniewski"},{"id":"1899","first_name":"Jürgen","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"location":"Porto, Portugal","name":"16th IEEE International Conference on Industrial Informatics, INDIN 2018 "}},{"department":[{"_id":"DEP5019"},{"_id":"DEP5023"}],"year":2018,"author":[{"last_name":"Ehrlich","full_name":"Ehrlich, Marco","id":"61562","first_name":"Marco"},{"id":"49801","first_name":"Dorota","last_name":"Lang","full_name":"Lang, Dorota"},{"first_name":"Martin Jan","last_name":"Mytych","full_name":"Mytych, Martin Jan"},{"full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","id":"1899","first_name":"Jürgen"},{"full_name":"Malischewski, Torsten","first_name":"Torsten","last_name":"Malischewski"}],"status":"public","publisher":"VDI","title":"Preparing Smart Sensors for Industrie 4.0: Requirements, Potentials, and Solutions","citation":{"ieee":"M. Ehrlich, D. Lang, M. J. Mytych, J. Jasperneite, and T. Malischewski, “Preparing Smart Sensors for Industrie 4.0: Requirements, Potentials, and Solutions,” Automation, 2018.","ama":"Ehrlich M, Lang D, Mytych MJ, Jasperneite J, Malischewski T. Preparing Smart Sensors for Industrie 4.0: Requirements, Potentials, and Solutions. Automation. 2018.","short":"M. Ehrlich, D. Lang, M.J. Mytych, J. Jasperneite, T. Malischewski, Automation (2018).","din1505-2-1":"Ehrlich, Marco ; Lang, Dorota ; Mytych, Martin Jan ; Jasperneite, Jürgen ; Malischewski, Torsten: Preparing Smart Sensors for Industrie 4.0: Requirements, Potentials, and Solutions. In: Automation. Baden Baden, VDI (2018)","chicago-de":"Ehrlich, Marco, Dorota Lang, Martin Jan Mytych, Jürgen Jasperneite und Torsten Malischewski. 2018. Preparing Smart Sensors for Industrie 4.0: Requirements, Potentials, and Solutions. Automation.","apa":"Ehrlich, M., Lang, D., Mytych, M. J., Jasperneite, J., & Malischewski, T. (2018). Preparing Smart Sensors for Industrie 4.0: Requirements, Potentials, and Solutions. Automation.","chicago":"Ehrlich, Marco, Dorota Lang, Martin Jan Mytych, Jürgen Jasperneite, and Torsten Malischewski. “Preparing Smart Sensors for Industrie 4.0: Requirements, Potentials, and Solutions.” Automation, 2018.","van":"Ehrlich M, Lang D, Mytych MJ, Jasperneite J, Malischewski T. Preparing Smart Sensors for Industrie 4.0: Requirements, Potentials, and Solutions. Automation. 2018;","havard":"M. Ehrlich, D. Lang, M.J. Mytych, J. Jasperneite, T. Malischewski, Preparing Smart Sensors for Industrie 4.0: Requirements, Potentials, and Solutions, Automation. (2018).","mla":"Ehrlich, Marco, et al. “Preparing Smart Sensors for Industrie 4.0: Requirements, Potentials, and Solutions.” Automation, VDI, 2018.","bjps":"Ehrlich M et al. (2018) Preparing Smart Sensors for Industrie 4.0: Requirements, Potentials, and Solutions. Automation.","ufg":"Ehrlich, Marco et. al. (2018): Preparing Smart Sensors for Industrie 4.0: Requirements, Potentials, and Solutions, in: Automation."},"language":[{"iso":"eng"}],"place":"Baden Baden","_id":"4844","type":"journal_article","date_created":"2021-02-02T12:49:54Z","publication":"Automation","date_updated":"2023-03-15T13:49:56Z","user_id":"45673"},{"citation":{"ieee":"T. Kobzan, A. Biendarra, S. Schriegel, T. Herbst, T. Müller, and J. Jasperneite, “Utilizing Blockchain Technology in Industrial Manufacturing with the help of Network Simulation,” presented at the INDIN 2018 – IEEE 16th International Conference on Industrial Informatics, Porto, Portugal, 2018.","ama":"Kobzan T, Biendarra A, Schriegel S, Herbst T, Müller T, Jasperneite J. Utilizing Blockchain Technology in Industrial Manufacturing with the help of Network Simulation. In: ; 2018.","din1505-2-1":"Kobzan, Thomas ; Biendarra, Alexander ; Schriegel, Sebastian ; Herbst, Thomas ; Müller, Thomas ; Jasperneite, Jürgen: Utilizing Blockchain Technology in Industrial Manufacturing with the help of Network Simulation. In: , 2018","chicago-de":"Kobzan, Thomas, Alexander Biendarra, Sebastian Schriegel, Thomas Herbst, Thomas Müller und Jürgen Jasperneite. 2018. Utilizing Blockchain Technology in Industrial Manufacturing with the help of Network Simulation. In: .","short":"T. Kobzan, A. Biendarra, S. Schriegel, T. Herbst, T. Müller, J. Jasperneite, in: 2018.","chicago":"Kobzan, Thomas, Alexander Biendarra, Sebastian Schriegel, Thomas Herbst, Thomas Müller, and Jürgen Jasperneite. “Utilizing Blockchain Technology in Industrial Manufacturing with the Help of Network Simulation,” 2018.","apa":"Kobzan, T., Biendarra, A., Schriegel, S., Herbst, T., Müller, T., & Jasperneite, J. (2018). Utilizing Blockchain Technology in Industrial Manufacturing with the help of Network Simulation. Presented at the INDIN 2018 – IEEE 16th International Conference on Industrial Informatics, Porto, Portugal.","ufg":"Kobzan, Thomas et. al. (2018): Utilizing Blockchain Technology in Industrial Manufacturing with the help of Network Simulation, in: .","bjps":"Kobzan T et al. (2018) Utilizing Blockchain Technology in Industrial Manufacturing with the Help of Network Simulation.","mla":"Kobzan, Thomas, et al. Utilizing Blockchain Technology in Industrial Manufacturing with the Help of Network Simulation. 2018.","havard":"T. Kobzan, A. Biendarra, S. Schriegel, T. Herbst, T. Müller, J. Jasperneite, Utilizing Blockchain Technology in Industrial Manufacturing with the help of Network Simulation, in: 2018.","van":"Kobzan T, Biendarra A, Schriegel S, Herbst T, Müller T, Jasperneite J. Utilizing Blockchain Technology in Industrial Manufacturing with the help of Network Simulation. In 2018."},"title":"Utilizing Blockchain Technology in Industrial Manufacturing with the help of Network Simulation","status":"public","year":2018,"author":[{"last_name":"Kobzan","first_name":"Thomas","full_name":"Kobzan, Thomas"},{"last_name":"Biendarra","first_name":"Alexander","full_name":"Biendarra, Alexander"},{"first_name":"Sebastian","last_name":"Schriegel","full_name":"Schriegel, Sebastian"},{"last_name":"Herbst","first_name":"Thomas","full_name":"Herbst, Thomas"},{"first_name":"Thomas","full_name":"Müller, Thomas","last_name":"Müller"},{"id":"1899","first_name":"Jürgen","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite"}],"conference":{"location":"Porto, Portugal","name":"INDIN 2018 – IEEE 16th International Conference on Industrial Informatics"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"user_id":"45673","date_updated":"2023-03-15T13:49:56Z","type":"conference","date_created":"2021-02-02T12:53:06Z","_id":"4845","language":[{"iso":"eng"}]},{"citation":{"ufg":"Kleen, Philip et. al. (2018): Funktionale Sicherheit von autonomen Transportsystemen in flexiblen I4.0 Fertigungsumgebungen, in: .","bjps":"Kleen P et al. (2018) Funktionale Sicherheit von Autonomen Transportsystemen in Flexiblen I4.0 Fertigungsumgebungen.","havard":"P. Kleen, J. Albrecht, J. Jasperneite, Detlev Richter, Funktionale Sicherheit von autonomen Transportsystemen in flexiblen I4.0 Fertigungsumgebungen, in: 2018.","mla":"Kleen, Philip, et al. Funktionale Sicherheit von Autonomen Transportsystemen in Flexiblen I4.0 Fertigungsumgebungen. 2018.","van":"Kleen P, Albrecht J, Jasperneite J, Richter Detlev. Funktionale Sicherheit von autonomen Transportsystemen in flexiblen I4.0 Fertigungsumgebungen. In 2018.","chicago":"Kleen, Philip, Janis Albrecht, Jürgen Jasperneite, and Detlev Richter. “Funktionale Sicherheit von Autonomen Transportsystemen in Flexiblen I4.0 Fertigungsumgebungen,” 2018.","apa":"Kleen, P., Albrecht, J., Jasperneite, J., & Richter, Detlev. (2018). Funktionale Sicherheit von autonomen Transportsystemen in flexiblen I4.0 Fertigungsumgebungen. Presented at the Echtzeit und Sicherheit, Boppard am Rhein.","chicago-de":"Kleen, Philip, Janis Albrecht, Jürgen Jasperneite und Detlev Richter. 2018. Funktionale Sicherheit von autonomen Transportsystemen in flexiblen I4.0 Fertigungsumgebungen. In: .","din1505-2-1":"Kleen, Philip ; Albrecht, Janis ; Jasperneite, Jürgen ; Richter, Detlev: Funktionale Sicherheit von autonomen Transportsystemen in flexiblen I4.0 Fertigungsumgebungen. In: , 2018","short":"P. Kleen, J. Albrecht, J. Jasperneite, Detlev Richter, in: 2018.","ama":"Kleen P, Albrecht J, Jasperneite J, Richter Detlev. Funktionale Sicherheit von autonomen Transportsystemen in flexiblen I4.0 Fertigungsumgebungen. In: ; 2018.","ieee":"P. Kleen, J. Albrecht, J. Jasperneite, and Detlev Richter, “Funktionale Sicherheit von autonomen Transportsystemen in flexiblen I4.0 Fertigungsumgebungen,” presented at the Echtzeit und Sicherheit, Boppard am Rhein, 2018."},"title":"Funktionale Sicherheit von autonomen Transportsystemen in flexiblen I4.0 Fertigungsumgebungen","status":"public","year":2018,"author":[{"first_name":"Philip","id":"44776","full_name":"Kleen, Philip","last_name":"Kleen"},{"first_name":"Janis","full_name":"Albrecht, Janis","id":"60402","last_name":"Albrecht"},{"id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen","last_name":"Jasperneite"},{"last_name":"Richter","first_name":" Detlev","full_name":"Richter, Detlev"}],"conference":{"location":"Boppard am Rhein","name":"Echtzeit und Sicherheit"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"user_id":"45673","date_updated":"2023-03-15T13:49:56Z","type":"conference","date_created":"2021-02-02T12:57:52Z","language":[{"iso":"eng"}],"_id":"4846"},{"type":"conference","date_created":"2021-02-02T13:00:05Z","date_updated":"2023-03-15T13:49:56Z","user_id":"45673","language":[{"iso":"eng"}],"_id":"4847","title":"Automatische Evaluierung von Anforderungen bezüglich der Informationssicherheit für das zukünftige industrielle Netzwerkmanagement","citation":{"ama":"Ehrlich M, Trsek H, Jasperneite J. Automatische Evaluierung von Anforderungen bezüglich der Informationssicherheit für das zukünftige industrielle Netzwerkmanagement. In: ; 2018.","ieee":"M. Ehrlich, H. Trsek, and J. Jasperneite, “Automatische Evaluierung von Anforderungen bezüglich der Informationssicherheit für das zukünftige industrielle Netzwerkmanagement,” presented at the Echtzeit und Sicherheit , Boppard am Rhein, 2018.","chicago-de":"Ehrlich, Marco, Henning Trsek und Jürgen Jasperneite. 2018. Automatische Evaluierung von Anforderungen bezüglich der Informationssicherheit für das zukünftige industrielle Netzwerkmanagement. In: .","din1505-2-1":"Ehrlich, Marco ; Trsek, Henning ; Jasperneite, Jürgen: Automatische Evaluierung von Anforderungen bezüglich der Informationssicherheit für das zukünftige industrielle Netzwerkmanagement. In: , 2018","short":"M. Ehrlich, H. Trsek, J. Jasperneite, in: 2018.","bjps":"Ehrlich M, Trsek H and Jasperneite J (2018) Automatische Evaluierung von Anforderungen Bezüglich Der Informationssicherheit Für Das Zukünftige Industrielle Netzwerkmanagement.","mla":"Ehrlich, Marco, et al. Automatische Evaluierung von Anforderungen Bezüglich Der Informationssicherheit Für Das Zukünftige Industrielle Netzwerkmanagement. 2018.","havard":"M. Ehrlich, H. Trsek, J. Jasperneite, Automatische Evaluierung von Anforderungen bezüglich der Informationssicherheit für das zukünftige industrielle Netzwerkmanagement, in: 2018.","ufg":"Ehrlich, Marco et. al. (2018): Automatische Evaluierung von Anforderungen bezüglich der Informationssicherheit für das zukünftige industrielle Netzwerkmanagement, in: .","van":"Ehrlich M, Trsek H, Jasperneite J. Automatische Evaluierung von Anforderungen bezüglich der Informationssicherheit für das zukünftige industrielle Netzwerkmanagement. In 2018.","chicago":"Ehrlich, Marco, Henning Trsek, and Jürgen Jasperneite. “Automatische Evaluierung von Anforderungen Bezüglich Der Informationssicherheit Für Das Zukünftige Industrielle Netzwerkmanagement,” 2018.","apa":"Ehrlich, M., Trsek, H., & Jasperneite, J. (2018). Automatische Evaluierung von Anforderungen bezüglich der Informationssicherheit für das zukünftige industrielle Netzwerkmanagement. Presented at the Echtzeit und Sicherheit , Boppard am Rhein."},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"location":"Boppard am Rhein","name":"Echtzeit und Sicherheit "},"year":2018,"author":[{"full_name":"Ehrlich, Marco","first_name":"Marco","id":"61562","last_name":"Ehrlich"},{"last_name":"Trsek","id":"1486","first_name":"Henning","full_name":"Trsek, Henning"},{"first_name":"Jürgen","full_name":"Jasperneite, Jürgen","id":"1899","last_name":"Jasperneite"}],"status":"public"},{"date_updated":"2023-03-15T13:49:56Z","user_id":"45673","type":"conference","date_created":"2021-02-02T13:04:54Z","language":[{"iso":"eng"}],"_id":"4848","citation":{"short":"M. Ehrlich, D. Krummacker, C. Fischer, R. Guillaume, S.S. Perez Olaya, A. Frimpong, H. de Meer, M. Wollschläger, H.D. Schotten, J. Jasperneite, in: 2018.","din1505-2-1":"Ehrlich, Marco ; Krummacker, Dennis ; Fischer, Christoph ; Guillaume, René ; Perez Olaya, Santiago Soler ; Frimpong, Ansah ; de Meer, Hermann ; Wollschläger, Martin ; u. a.: Software-Defined Networking as an Enabler for Future Industrial Network Management. In: , 2018","chicago-de":"Ehrlich, Marco, Dennis Krummacker, Christoph Fischer, René Guillaume, Santiago Soler Perez Olaya, Ansah Frimpong, Hermann de Meer, Martin Wollschläger, Hans D. Schotten und Jürgen Jasperneite. 2018. Software-Defined Networking as an Enabler for Future Industrial Network Management. In: .","van":"Ehrlich M, Krummacker D, Fischer C, Guillaume R, Perez Olaya SS, Frimpong A, et al. Software-Defined Networking as an Enabler for Future Industrial Network Management. In 2018.","ufg":"Ehrlich, Marco et. al. (2018): Software-Defined Networking as an Enabler for Future Industrial Network Management, in: .","bjps":"Ehrlich M et al. (2018) Software-Defined Networking as an Enabler for Future Industrial Network Management.","havard":"M. Ehrlich, D. Krummacker, C. Fischer, R. Guillaume, S.S. Perez Olaya, A. Frimpong, H. de Meer, M. Wollschläger, H.D. Schotten, J. Jasperneite, Software-Defined Networking as an Enabler for Future Industrial Network Management, in: 2018.","mla":"Ehrlich, Marco, et al. Software-Defined Networking as an Enabler for Future Industrial Network Management. 2018.","apa":"Ehrlich, M., Krummacker, D., Fischer, C., Guillaume, R., Perez Olaya, S. S., Frimpong, A., … Jasperneite, J. (2018). Software-Defined Networking as an Enabler for Future Industrial Network Management. Presented at the IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA) , Turin, Italien.","chicago":"Ehrlich, Marco, Dennis Krummacker, Christoph Fischer, René Guillaume, Santiago Soler Perez Olaya, Ansah Frimpong, Hermann de Meer, Martin Wollschläger, Hans D. Schotten, and Jürgen Jasperneite. “Software-Defined Networking as an Enabler for Future Industrial Network Management,” 2018.","ama":"Ehrlich M, Krummacker D, Fischer C, et al. Software-Defined Networking as an Enabler for Future Industrial Network Management. In: ; 2018.","ieee":"M. Ehrlich et al., “Software-Defined Networking as an Enabler for Future Industrial Network Management,” presented at the IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA) , Turin, Italien, 2018."},"title":"Software-Defined Networking as an Enabler for Future Industrial Network Management","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"name":"IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA) ","location":"Turin, Italien"},"author":[{"first_name":"Marco","last_name":"Ehrlich","id":"61562","full_name":"Ehrlich, Marco"},{"last_name":"Krummacker","first_name":"Dennis","full_name":"Krummacker, Dennis"},{"last_name":"Fischer","first_name":"Christoph","full_name":"Fischer, Christoph"},{"full_name":"Guillaume, René","first_name":"René","last_name":"Guillaume"},{"last_name":"Perez Olaya","full_name":"Perez Olaya, Santiago Soler","first_name":"Santiago Soler"},{"first_name":"Ansah","last_name":"Frimpong","full_name":"Frimpong, Ansah"},{"first_name":"Hermann","full_name":"de Meer, Hermann","last_name":"de Meer"},{"first_name":"Martin","full_name":"Wollschläger, Martin","last_name":"Wollschläger"},{"first_name":"Hans D.","full_name":"Schotten, Hans D.","last_name":"Schotten"},{"first_name":"Jürgen","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","id":"1899"}],"year":2018},{"date_created":"2021-02-02T13:06:59Z","type":"conference","user_id":"45673","date_updated":"2023-03-15T13:49:56Z","_id":"4849","language":[{"iso":"eng"}],"title":"Dynamic scheduling in large-scale stochastic processing networks for demand-driven manufacturing","citation":{"ufg":"Qu, Shuhui et. al. (2018): Dynamic scheduling in large-scale stochastic processing networks for demand-driven manufacturing, in: .","bjps":"Qu S, Wang J and Jasperneite J (2018) Dynamic Scheduling in Large-Scale Stochastic Processing Networks for Demand-Driven Manufacturing.","mla":"Qu, Shuhui, et al. Dynamic Scheduling in Large-Scale Stochastic Processing Networks for Demand-Driven Manufacturing. 2018.","havard":"S. Qu, J. Wang, J. Jasperneite, Dynamic scheduling in large-scale stochastic processing networks for demand-driven manufacturing, in: 2018.","van":"Qu S, Wang J, Jasperneite J. Dynamic scheduling in large-scale stochastic processing networks for demand-driven manufacturing. In 2018.","chicago":"Qu, Shuhui, Jie Wang, and Jürgen Jasperneite. “Dynamic Scheduling in Large-Scale Stochastic Processing Networks for Demand-Driven Manufacturing,” 2018.","apa":"Qu, S., Wang, J., & Jasperneite, J. (2018). Dynamic scheduling in large-scale stochastic processing networks for demand-driven manufacturing. Presented at the 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2018) , Torino, Italy.","din1505-2-1":"Qu, Shuhui ; Wang, Jie ; Jasperneite, Jürgen: Dynamic scheduling in large-scale stochastic processing networks for demand-driven manufacturing. In: , 2018","chicago-de":"Qu, Shuhui, Jie Wang und Jürgen Jasperneite. 2018. Dynamic scheduling in large-scale stochastic processing networks for demand-driven manufacturing. In: .","short":"S. Qu, J. Wang, J. Jasperneite, in: 2018.","ama":"Qu S, Wang J, Jasperneite J. Dynamic scheduling in large-scale stochastic processing networks for demand-driven manufacturing. In: ; 2018.","ieee":"S. Qu, J. Wang, and J. Jasperneite, “Dynamic scheduling in large-scale stochastic processing networks for demand-driven manufacturing,” presented at the 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2018) , Torino, Italy, 2018."},"year":2018,"author":[{"first_name":"Shuhui","full_name":"Qu, Shuhui","last_name":"Qu"},{"full_name":"Wang, Jie","last_name":"Wang","first_name":"Jie"},{"id":"1899","first_name":"Jürgen","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"name":"23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2018) ","location":"Torino, Italy"},"status":"public"},{"year":2018,"author":[{"first_name":"Sebastian","full_name":"Schriegel, Sebastian","last_name":"Schriegel"},{"full_name":"Biendarra, Alexander","first_name":"Alexander","last_name":"Biendarra"},{"last_name":"Kobzan","first_name":"Thomas","full_name":"Kobzan, Thomas"},{"last_name":"Leurs","full_name":"Leurs, Ludwig","first_name":"Ludwig"},{"full_name":"Jasperneite, Jürgen","id":"1899","last_name":"Jasperneite","first_name":"Jürgen"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"location":"Lemgo","name":"KommA 2018 – Jahreskolloquium Kommunikation in der Automation"},"status":"public","title":"Ethernet TSN Nano Profil – Migrationshelfer vom industriellen Brownfield zum Ethernet TSN-basierten IIoT","citation":{"ieee":"S. Schriegel, A. Biendarra, T. Kobzan, L. Leurs, and J. Jasperneite, “Ethernet TSN Nano Profil – Migrationshelfer vom industriellen Brownfield zum Ethernet TSN-basierten IIoT,” presented at the KommA 2018 – Jahreskolloquium Kommunikation in der Automation, Lemgo, 2018.","ama":"Schriegel S, Biendarra A, Kobzan T, Leurs L, Jasperneite J. Ethernet TSN Nano Profil – Migrationshelfer vom industriellen Brownfield zum Ethernet TSN-basierten IIoT. In: ; 2018.","apa":"Schriegel, S., Biendarra, A., Kobzan, T., Leurs, L., & Jasperneite, J. (2018). Ethernet TSN Nano Profil – Migrationshelfer vom industriellen Brownfield zum Ethernet TSN-basierten IIoT. Presented at the KommA 2018 – Jahreskolloquium Kommunikation in der Automation, Lemgo.","chicago":"Schriegel, Sebastian, Alexander Biendarra, Thomas Kobzan, Ludwig Leurs, and Jürgen Jasperneite. “Ethernet TSN Nano Profil – Migrationshelfer Vom Industriellen Brownfield Zum Ethernet TSN-Basierten IIoT,” 2018.","van":"Schriegel S, Biendarra A, Kobzan T, Leurs L, Jasperneite J. Ethernet TSN Nano Profil – Migrationshelfer vom industriellen Brownfield zum Ethernet TSN-basierten IIoT. In 2018.","mla":"Schriegel, Sebastian, et al. Ethernet TSN Nano Profil – Migrationshelfer Vom Industriellen Brownfield Zum Ethernet TSN-Basierten IIoT. 2018.","havard":"S. Schriegel, A. Biendarra, T. Kobzan, L. Leurs, J. Jasperneite, Ethernet TSN Nano Profil – Migrationshelfer vom industriellen Brownfield zum Ethernet TSN-basierten IIoT, in: 2018.","bjps":"Schriegel S et al. (2018) Ethernet TSN Nano Profil – Migrationshelfer Vom Industriellen Brownfield Zum Ethernet TSN-Basierten IIoT.","ufg":"Schriegel, Sebastian et. al. (2018): Ethernet TSN Nano Profil – Migrationshelfer vom industriellen Brownfield zum Ethernet TSN-basierten IIoT, in: .","short":"S. Schriegel, A. Biendarra, T. Kobzan, L. Leurs, J. Jasperneite, in: 2018.","din1505-2-1":"Schriegel, Sebastian ; Biendarra, Alexander ; Kobzan, Thomas ; Leurs, Ludwig ; Jasperneite, Jürgen: Ethernet TSN Nano Profil – Migrationshelfer vom industriellen Brownfield zum Ethernet TSN-basierten IIoT. In: , 2018","chicago-de":"Schriegel, Sebastian, Alexander Biendarra, Thomas Kobzan, Ludwig Leurs und Jürgen Jasperneite. 2018. Ethernet TSN Nano Profil – Migrationshelfer vom industriellen Brownfield zum Ethernet TSN-basierten IIoT. In: ."},"_id":"4850","language":[{"iso":"eng"}],"type":"conference","date_created":"2021-02-02T13:11:14Z","user_id":"45673","date_updated":"2023-03-15T13:49:56Z"},{"department":[{"_id":"DEP6020"}],"year":2018,"author":[{"full_name":"Borcherding, Holger","last_name":"Borcherding","id":"1693","first_name":"Holger"},{"id":"52080","first_name":"Simon","full_name":"Cepin, Simon","last_name":"Cepin"},{"id":"58889","last_name":"Koch","first_name":"Jan-Niklas","full_name":"Koch, Jan-Niklas"}],"publisher":"TIB Hannover","status":"public","title":"Abschlussbericht zum Projekt Luftstrom (Luftgekühlte Wide Band Gap-Leistungselektronik und Mechatronik) : BMBF-Verbundvorhaben im Rahmen einer Initiative der NPE - AG1 Cluster 2 : Teilprojekt Hochschule Ostwestfalen-Lippe: Untersuchung der leistungselektronischen Komponenten, von Entwärmungstechnologien und Aufbaukonzepten für Hochvolt-Bordnetzwandlern und Nebenaggregats-Wechselrichtern für Nutzfahrzeuge","citation":{"chicago-de":"Borcherding, Holger, Simon Cepin und Jan-Niklas Koch. 2018. Abschlussbericht zum Projekt Luftstrom (Luftgekühlte Wide Band Gap-Leistungselektronik und Mechatronik) : BMBF-Verbundvorhaben im Rahmen einer Initiative der NPE - AG1 Cluster 2 : Teilprojekt Hochschule Ostwestfalen-Lippe: Untersuchung der leistungselektronischen Komponenten, von Entwärmungstechnologien und Aufbaukonzepten für Hochvolt-Bordnetzwandlern und Nebenaggregats-Wechselrichtern für Nutzfahrzeuge. Lemgo: TIB Hannover.","din1505-2-1":"Borcherding, Holger ; Cepin, Simon ; Koch, Jan-Niklas: Abschlussbericht zum Projekt Luftstrom (Luftgekühlte Wide Band Gap-Leistungselektronik und Mechatronik) : BMBF-Verbundvorhaben im Rahmen einer Initiative der NPE - AG1 Cluster 2 : Teilprojekt Hochschule Ostwestfalen-Lippe: Untersuchung der leistungselektronischen Komponenten, von Entwärmungstechnologien und Aufbaukonzepten für Hochvolt-Bordnetzwandlern und Nebenaggregats-Wechselrichtern für Nutzfahrzeuge. Lemgo : TIB Hannover, 2018","short":"H. Borcherding, S. Cepin, J.-N. Koch, Abschlussbericht Zum Projekt Luftstrom (Luftgekühlte Wide Band Gap-Leistungselektronik Und Mechatronik) : BMBF-Verbundvorhaben Im Rahmen Einer Initiative Der NPE - AG1 Cluster 2 : Teilprojekt Hochschule Ostwestfalen-Lippe: Untersuchung Der Leistungselektronischen Komponenten, von Entwärmungstechnologien Und Aufbaukonzepten Für Hochvolt-Bordnetzwandlern Und Nebenaggregats-Wechselrichtern Für Nutzfahrzeuge, TIB Hannover, Lemgo, 2018.","ufg":"Borcherding, Holger et. al. (2018): Abschlussbericht zum Projekt Luftstrom (Luftgekühlte Wide Band Gap-Leistungselektronik und Mechatronik) : BMBF-Verbundvorhaben im Rahmen einer Initiative der NPE - AG1 Cluster 2 : Teilprojekt Hochschule Ostwestfalen-Lippe: Untersuchung der leistungselektronischen Komponenten, von Entwärmungstechnologien und Aufbaukonzepten für Hochvolt-Bordnetzwandlern und Nebenaggregats-Wechselrichtern für Nutzfahrzeuge, Lemgo.","mla":"Borcherding, Holger, et al. Abschlussbericht Zum Projekt Luftstrom (Luftgekühlte Wide Band Gap-Leistungselektronik Und Mechatronik) : BMBF-Verbundvorhaben Im Rahmen Einer Initiative Der NPE - AG1 Cluster 2 : Teilprojekt Hochschule Ostwestfalen-Lippe: Untersuchung Der Leistungselektronischen Komponenten, von Entwärmungstechnologien Und Aufbaukonzepten Für Hochvolt-Bordnetzwandlern Und Nebenaggregats-Wechselrichtern Für Nutzfahrzeuge. TIB Hannover, 2018.","havard":"H. Borcherding, S. Cepin, J.-N. Koch, Abschlussbericht zum Projekt Luftstrom (Luftgekühlte Wide Band Gap-Leistungselektronik und Mechatronik) : BMBF-Verbundvorhaben im Rahmen einer Initiative der NPE - AG1 Cluster 2 : Teilprojekt Hochschule Ostwestfalen-Lippe: Untersuchung der leistungselektronischen Komponenten, von Entwärmungstechnologien und Aufbaukonzepten für Hochvolt-Bordnetzwandlern und Nebenaggregats-Wechselrichtern für Nutzfahrzeuge, TIB Hannover, Lemgo, 2018.","bjps":"Borcherding H, Cepin S and Koch J-N (2018) Abschlussbericht Zum Projekt Luftstrom (Luftgekühlte Wide Band Gap-Leistungselektronik Und Mechatronik) : BMBF-Verbundvorhaben Im Rahmen Einer Initiative Der NPE - AG1 Cluster 2 : Teilprojekt Hochschule Ostwestfalen-Lippe: Untersuchung Der Leistungselektronischen Komponenten, von Entwärmungstechnologien Und Aufbaukonzepten Für Hochvolt-Bordnetzwandlern Und Nebenaggregats-Wechselrichtern Für Nutzfahrzeuge. Lemgo: TIB Hannover.","van":"Borcherding H, Cepin S, Koch J-N. Abschlussbericht zum Projekt Luftstrom (Luftgekühlte Wide Band Gap-Leistungselektronik und Mechatronik) : BMBF-Verbundvorhaben im Rahmen einer Initiative der NPE - AG1 Cluster 2 : Teilprojekt Hochschule Ostwestfalen-Lippe: Untersuchung der leistungselektronischen Komponenten, von Entwärmungstechnologien und Aufbaukonzepten für Hochvolt-Bordnetzwandlern und Nebenaggregats-Wechselrichtern für Nutzfahrzeuge. Lemgo: TIB Hannover; 2018.","ama":"Borcherding H, Cepin S, Koch J-N. Abschlussbericht Zum Projekt Luftstrom (Luftgekühlte Wide Band Gap-Leistungselektronik Und Mechatronik) : BMBF-Verbundvorhaben Im Rahmen Einer Initiative Der NPE - AG1 Cluster 2 : Teilprojekt Hochschule Ostwestfalen-Lippe: Untersuchung Der Leistungselektronischen Komponenten, von Entwärmungstechnologien Und Aufbaukonzepten Für Hochvolt-Bordnetzwandlern Und Nebenaggregats-Wechselrichtern Für Nutzfahrzeuge. Lemgo: TIB Hannover; 2018.","chicago":"Borcherding, Holger, Simon Cepin, and Jan-Niklas Koch. Abschlussbericht Zum Projekt Luftstrom (Luftgekühlte Wide Band Gap-Leistungselektronik Und Mechatronik) : BMBF-Verbundvorhaben Im Rahmen Einer Initiative Der NPE - AG1 Cluster 2 : Teilprojekt Hochschule Ostwestfalen-Lippe: Untersuchung Der Leistungselektronischen Komponenten, von Entwärmungstechnologien Und Aufbaukonzepten Für Hochvolt-Bordnetzwandlern Und Nebenaggregats-Wechselrichtern Für Nutzfahrzeuge. Lemgo: TIB Hannover, 2018.","apa":"Borcherding, H., Cepin, S., & Koch, J.-N. (2018). Abschlussbericht zum Projekt Luftstrom (Luftgekühlte Wide Band Gap-Leistungselektronik und Mechatronik) : BMBF-Verbundvorhaben im Rahmen einer Initiative der NPE - AG1 Cluster 2 : Teilprojekt Hochschule Ostwestfalen-Lippe: Untersuchung der leistungselektronischen Komponenten, von Entwärmungstechnologien und Aufbaukonzepten für Hochvolt-Bordnetzwandlern und Nebenaggregats-Wechselrichtern für Nutzfahrzeuge. Lemgo: TIB Hannover.","ieee":"H. Borcherding, S. Cepin, and J.-N. Koch, Abschlussbericht zum Projekt Luftstrom (Luftgekühlte Wide Band Gap-Leistungselektronik und Mechatronik) : BMBF-Verbundvorhaben im Rahmen einer Initiative der NPE - AG1 Cluster 2 : Teilprojekt Hochschule Ostwestfalen-Lippe: Untersuchung der leistungselektronischen Komponenten, von Entwärmungstechnologien und Aufbaukonzepten für Hochvolt-Bordnetzwandlern und Nebenaggregats-Wechselrichtern für Nutzfahrzeuge. Lemgo: TIB Hannover, 2018."},"_id":"4908","language":[{"iso":"eng"}],"place":"Lemgo","report_number":"FKZ: 16EMO0081","date_created":"2021-02-08T13:16:21Z","type":"report_science","date_updated":"2023-03-15T13:49:56Z","user_id":"74004"},{"abstract":[{"lang":"eng","text":"FACADE 2018 - Adaptive! : COST Action TU1403 Adaptive Facades Network Final Conference"}],"conference":{"start_date":"2018-11-26","end_date":"2018-11-27","name":"Facade 2018"},"department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"author":[{"orcid":"0000-0002-8594-3168","last_name":"Pottgiesser","first_name":"Uta","full_name":"Pottgiesser, Uta","id":"27166"},{"first_name":"Ulrich","full_name":"Knaack, Ulrich","id":"27160","last_name":"Knaack"},{"last_name":"Louter","first_name":"Christian","full_name":"Louter, Christian"}],"year":2018,"publisher":"TU Delft Open","page":"38-41","status":"public","title":"Activity report Working Group 4 (WG4): Dissemination and Future Research","publication_status":"published","citation":{"van":"Pottgiesser U, Knaack U, Louter C. Activity report Working Group 4 (WG4): Dissemination and Future Research. In: Luible A, Gosztonyi S, editors. Facade 2018 - Adaptive! Netherlands: TU Delft Open; 2018. p. 38–41.","mla":"Pottgiesser, Uta, et al. “Activity Report Working Group 4 (WG4): Dissemination and Future Research.” Facade 2018 - Adaptive!, edited by Andreas Luible and Susanne Gosztonyi, TU Delft Open, 2018, pp. 38–41.","bjps":"Pottgiesser U, Knaack U and Louter C (2018) Activity Report Working Group 4 (WG4): Dissemination and Future Research. In Luible A and Gosztonyi S (eds), Facade 2018 - Adaptive! Netherlands: TU Delft Open, pp. 38–41.","havard":"U. Pottgiesser, U. Knaack, C. Louter, Activity report Working Group 4 (WG4): Dissemination and Future Research, in: A. Luible, S. Gosztonyi (Eds.), Facade 2018 - Adaptive!, TU Delft Open, Netherlands, 2018: pp. 38–41.","ufg":"Pottgiesser, Uta et. al. (2018): Activity report Working Group 4 (WG4): Dissemination and Future Research, in: Andreas Luible/Susanne Gosztonyi (Hgg.): Facade 2018 - Adaptive!, Netherlands, S. 38–41.","apa":"Pottgiesser, U., Knaack, U., & Louter, C. (2018). Activity report Working Group 4 (WG4): Dissemination and Future Research. In A. Luible & S. Gosztonyi (Eds.), Facade 2018 - Adaptive! (pp. 38–41). Netherlands: TU Delft Open.","chicago":"Pottgiesser, Uta, Ulrich Knaack, and Christian Louter. “Activity Report Working Group 4 (WG4): Dissemination and Future Research.” In Facade 2018 - Adaptive!, edited by Andreas Luible and Susanne Gosztonyi, 38–41. Netherlands: TU Delft Open, 2018.","short":"U. Pottgiesser, U. Knaack, C. Louter, in: A. Luible, S. Gosztonyi (Eds.), Facade 2018 - Adaptive!, TU Delft Open, Netherlands, 2018, pp. 38–41.","din1505-2-1":"Pottgiesser, Uta ; Knaack, Ulrich ; Louter, Christian: Activity report Working Group 4 (WG4): Dissemination and Future Research. In: Luible, A. ; Gosztonyi, S. (Hrsg.): Facade 2018 - Adaptive!. Netherlands : TU Delft Open, 2018, S. 38–41","chicago-de":"Pottgiesser, Uta, Ulrich Knaack und Christian Louter. 2018. Activity report Working Group 4 (WG4): Dissemination and Future Research. In: Facade 2018 - Adaptive!, hg. von Andreas Luible und Susanne Gosztonyi, 38–41. Netherlands: TU Delft Open.","ama":"Pottgiesser U, Knaack U, Louter C. Activity report Working Group 4 (WG4): Dissemination and Future Research. In: Luible A, Gosztonyi S, eds. Facade 2018 - Adaptive!. Netherlands: TU Delft Open; 2018:38-41.","ieee":"U. Pottgiesser, U. Knaack, and C. Louter, “Activity report Working Group 4 (WG4): Dissemination and Future Research,” in Facade 2018 - Adaptive!, A. Luible and S. Gosztonyi, Eds. Netherlands: TU Delft Open, 2018, pp. 38–41."},"_id":"5143","language":[{"iso":"eng"}],"place":"Netherlands","type":"book_chapter","date_created":"2021-03-03T11:04:37Z","publication":"Facade 2018 - Adaptive!","editor":[{"full_name":"Luible, Andreas","last_name":"Luible","first_name":"Andreas"},{"last_name":"Gosztonyi","first_name":"Susanne","full_name":"Gosztonyi, Susanne"}],"date_updated":"2023-03-15T13:49:58Z","user_id":"45673"},{"_id":"5149","language":[{"iso":"eng"}],"place":"Netherlands","oa":"1","editor":[{"last_name":"Luible","full_name":"Luible, Andreas","first_name":"Andreas"},{"first_name":"Susanne","full_name":"Gosztonyi, Susanne","last_name":"Gosztonyi"},{"first_name":"Mauro","last_name":"Overend","full_name":"Overend, Mauro"},{"full_name":"Aelenei, Laura","first_name":"Laura","last_name":"Aelenei"},{"full_name":"Krstic-Furundzic, Aleksandra","last_name":"Krstic-Furundzic","first_name":"Aleksandra"},{"full_name":"Perino, Marco","last_name":"Perino","first_name":"Marco"},{"first_name":"Francesco","last_name":"Goya","full_name":"Goya, Francesco"},{"first_name":"Frank","last_name":"Wellershoff","full_name":"Wellershoff, Frank"},{"first_name":"Shady","last_name":"Attia","full_name":"Attia, Shady"},{"last_name":"Pottgiesser","first_name":"Uta","full_name":"Pottgiesser, Uta","id":"27166","orcid":"0000-0002-8594-3168"},{"id":"27160","first_name":"Ulrich","full_name":"Knaack, Ulrich","last_name":"Knaack"},{"first_name":"Christian","last_name":"Louter","full_name":"Louter, Christian"}],"date_updated":"2023-03-15T13:49:58Z","user_id":"45673","type":"conference_editor","date_created":"2021-03-03T11:10:06Z","quality_controlled":"1","publisher":"TU Delft Open","status":"public","department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"main_file_link":[{"url":"http://pure.tudelft.nl/ws/portalfiles/portal/53684886/COST_endconference2018_webversion.pdf","open_access":"1"}],"year":2018,"publication_status":"published","citation":{"ieee":"A. Luible et al., Eds., Facade 2018 - Adaptive!: Proceedings of the COST Action TU1403 Adaptive Facades Network Final Conference. Netherlands: TU Delft Open, 2018.","ama":"Luible A, Gosztonyi S, Overend M, et al., eds. Facade 2018 - Adaptive!: Proceedings of the COST Action TU1403 Adaptive Facades Network Final Conference. Netherlands: TU Delft Open; 2018.","apa":"Luible, A., Gosztonyi, S., Overend, M., Aelenei, L., Krstic-Furundzic, A., Perino, M., … Louter, C. (Eds.). (2018). Facade 2018 - Adaptive!: Proceedings of the COST Action TU1403 Adaptive Facades Network Final Conference. Netherlands: TU Delft Open.","chicago":"Luible, Andreas, Susanne Gosztonyi, Mauro Overend, Laura Aelenei, Aleksandra Krstic-Furundzic, Marco Perino, Francesco Goya, et al., eds. Facade 2018 - Adaptive!: Proceedings of the COST Action TU1403 Adaptive Facades Network Final Conference. Netherlands: TU Delft Open, 2018.","van":"Luible A, Gosztonyi S, Overend M, Aelenei L, Krstic-Furundzic A, Perino M, et al., editors. Facade 2018 - Adaptive!: Proceedings of the COST Action TU1403 Adaptive Facades Network Final Conference. Netherlands: TU Delft Open; 2018.","ufg":"Luible, Andreas et. al. (Hgg.) (2018): Facade 2018 - Adaptive!: Proceedings of the COST Action TU1403 Adaptive Facades Network Final Conference, Netherlands.","havard":"A. Luible, S. Gosztonyi, M. Overend, L. Aelenei, A. Krstic-Furundzic, M. Perino, F. Goya, F. Wellershoff, S. Attia, U. Pottgiesser, U. Knaack, C. Louter, eds., Facade 2018 - Adaptive!: Proceedings of the COST Action TU1403 Adaptive Facades Network Final Conference, TU Delft Open, Netherlands, 2018.","bjps":"Luible A et al. (eds) (2018) Facade 2018 - Adaptive!: Proceedings of the COST Action TU1403 Adaptive Facades Network Final Conference. Netherlands: TU Delft Open.","mla":"Luible, Andreas, et al., editors. Facade 2018 - Adaptive!: Proceedings of the COST Action TU1403 Adaptive Facades Network Final Conference. TU Delft Open, 2018.","short":"A. Luible, S. Gosztonyi, M. Overend, L. Aelenei, A. Krstic-Furundzic, M. Perino, F. Goya, F. Wellershoff, S. Attia, U. Pottgiesser, U. Knaack, C. Louter, eds., Facade 2018 - Adaptive!: Proceedings of the COST Action TU1403 Adaptive Facades Network Final Conference, TU Delft Open, Netherlands, 2018.","din1505-2-1":"Luible, A. ; Gosztonyi, S. ; Overend, M. ; Aelenei, L. ; Krstic-Furundzic, A. ; Perino, M. ; Goya, F. ; Wellershoff, F. ; u. a. (Hrsg.): Facade 2018 - Adaptive!: Proceedings of the COST Action TU1403 Adaptive Facades Network Final Conference. Netherlands : TU Delft Open, 2018","chicago-de":"Luible, Andreas, Susanne Gosztonyi, Mauro Overend, Laura Aelenei, Aleksandra Krstic-Furundzic, Marco Perino, Francesco Goya, u. a., Hrsg. 2018. Facade 2018 - Adaptive!: Proceedings of the COST Action TU1403 Adaptive Facades Network Final Conference. Netherlands: TU Delft Open."},"title":"Facade 2018 - Adaptive!: Proceedings of the COST Action TU1403 Adaptive Facades Network Final Conference"},{"citation":{"ama":"Kousa C, Pottgiesser U, De Vos E. Modern residential architecture in Aleppo City transformations and potentials for the reconstruction of Old-Aleppo. Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018. 2018:606-608.","ieee":"C. Kousa, U. Pottgiesser, and E. De Vos, “Modern residential architecture in Aleppo City transformations and potentials for the reconstruction of Old-Aleppo,” Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018, pp. 606–608, 2018.","van":"Kousa C, Pottgiesser U, De Vos E. Modern residential architecture in Aleppo City transformations and potentials for the reconstruction of Old-Aleppo. Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018. 2018;606–8.","ufg":"Kousa, Christine et. al. (2018): Modern residential architecture in Aleppo City transformations and potentials for the reconstruction of Old-Aleppo, in: Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018, S. 606–608.","bjps":"Kousa C, Pottgiesser U and De Vos E (2018) Modern Residential Architecture in Aleppo City Transformations and Potentials for the Reconstruction of Old-Aleppo. Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018 606–608.","mla":"Kousa, Christine, et al. “Modern Residential Architecture in Aleppo City Transformations and Potentials for the Reconstruction of Old-Aleppo.” Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018, 2018, pp. 606–08.","havard":"C. Kousa, U. Pottgiesser, E. De Vos, Modern residential architecture in Aleppo City transformations and potentials for the reconstruction of Old-Aleppo, Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018. (2018) 606–608.","apa":"Kousa, C., Pottgiesser, U., & De Vos, E. (2018). Modern residential architecture in Aleppo City transformations and potentials for the reconstruction of Old-Aleppo. Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018, 606–608.","chicago":"Kousa, Christine, Uta Pottgiesser, and Els De Vos. “Modern Residential Architecture in Aleppo City Transformations and Potentials for the Reconstruction of Old-Aleppo.” Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018, 2018, 606–8.","short":"C. Kousa, U. Pottgiesser, E. De Vos, Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018 (2018) 606–608.","chicago-de":"Kousa, Christine, Uta Pottgiesser und Els De Vos. 2018. Modern residential architecture in Aleppo City transformations and potentials for the reconstruction of Old-Aleppo. Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018: 606–608.","din1505-2-1":"Kousa, Christine ; Pottgiesser, Uta ; De Vos, Els: Modern residential architecture in Aleppo City transformations and potentials for the reconstruction of Old-Aleppo. In: Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018 (2018), S. 606–608"},"publication_status":"published","title":"Modern residential architecture in Aleppo City transformations and potentials for the reconstruction of Old-Aleppo","status":"public","page":"606-608","quality_controlled":"1","author":[{"first_name":"Christine","full_name":"Kousa, Christine","last_name":"Kousa","id":"74063"},{"id":"27166","first_name":"Uta","last_name":"Pottgiesser","full_name":"Pottgiesser, Uta","orcid":"0000-0002-8594-3168"},{"last_name":"De Vos","first_name":"Els","full_name":"De Vos, Els"}],"year":2018,"department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"user_id":"45673","date_updated":"2023-03-15T13:49:58Z","publication":"Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018","date_created":"2021-03-03T11:25:05Z","type":"journal_article","language":[{"iso":"eng"}],"_id":"5152"},{"publication":"Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018","type":"journal_article","date_created":"2021-03-03T11:26:41Z","user_id":"45673","date_updated":"2023-03-15T13:49:58Z","_id":"5154","language":[{"iso":"eng"}],"title":"Session 12-updating materials and technology","citation":{"ama":"Pottgiesser U. Session 12-updating materials and technology. Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018. 2018:394-395.","ieee":"U. Pottgiesser, “Session 12-updating materials and technology,” Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018, pp. 394–395, 2018.","van":"Pottgiesser U. Session 12-updating materials and technology. Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018. 2018;394–5.","ufg":"Pottgiesser, Uta (2018): Session 12-updating materials and technology, in: Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018, S. 394–395.","mla":"Pottgiesser, Uta. “Session 12-Updating Materials and Technology.” Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018, 2018, pp. 394–95.","bjps":"Pottgiesser U (2018) Session 12-Updating Materials and Technology. Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018 394–395.","havard":"U. Pottgiesser, Session 12-updating materials and technology, Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018. (2018) 394–395.","apa":"Pottgiesser, U. (2018). Session 12-updating materials and technology. Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018, 394–395.","chicago":"Pottgiesser, Uta. “Session 12-Updating Materials and Technology.” Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018, 2018, 394–95.","short":"U. Pottgiesser, Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018 (2018) 394–395.","chicago-de":"Pottgiesser, Uta. 2018. Session 12-updating materials and technology. Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018: 394–395.","din1505-2-1":"Pottgiesser, Uta: Session 12-updating materials and technology. In: Proceedings of the 15th International Docomomo Conference - Metamorphosis: The Continuity of Change, IDC 2018 (2018), S. 394–395"},"publication_status":"published","author":[{"first_name":"Uta","id":"27166","full_name":"Pottgiesser, Uta","last_name":"Pottgiesser","orcid":"0000-0002-8594-3168"}],"year":2018,"department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"quality_controlled":"1","status":"public","page":"394-395"},{"date_updated":"2024-07-22T08:14:55Z","user_id":"83781","editor":[{"id":"22414","full_name":"Hoelscher, Martin","last_name":"Hoelscher","first_name":"Martin"},{"full_name":"Hall, Oliver","first_name":"Oliver","last_name":"Hall","id":"27136"},{"orcid":"0000-0002-8841-9345","first_name":"Marcel","last_name":"Cardinali","id":"58462","full_name":"Cardinali, Marcel"},{"id":"58606","first_name":"Julia","last_name":"Krick","full_name":"Krick, Julia"}],"date_created":"2021-03-30T10:24:24Z","type":"journal_editor","publication_identifier":{"eissn":["2566-8919"],"issn":["2566-8900"]},"publication":"Heimat planen - Identifikation, Partizipation, Integration","language":[{"iso":"ger"}],"_id":"5360","oa":"1","publication_status":"published","citation":{"ama":"Hoelscher M, Hall O, Cardinali M, Krick J, eds. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. Technische Hochschule Ostwestfalen-Lippe; 2018.","ieee":"M. Hoelscher, O. Hall, M. Cardinali, and J. Krick, Eds., urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, no. 4. Technische Hochschule Ostwestfalen-Lippe, 2018.","van":"Hoelscher M, Hall O, Cardinali M, Krick J, editors. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. Heimat planen - Identifikation, Partizipation, Integration. Technische Hochschule Ostwestfalen-Lippe; 2018.","ufg":"Hoelscher, Martin u. a.: urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, o. O. 2018.","havard":"M. Hoelscher, O. Hall, M. Cardinali, J. Krick, eds., urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, Technische Hochschule Ostwestfalen-Lippe, 2018.","bjps":"Hoelscher M et al. (eds) (2018) urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. Technische Hochschule Ostwestfalen-Lippe.","mla":"Hoelscher, Martin, et al., editors. “urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung.” Heimat planen - Identifikation, Partizipation, Integration, no. 4, Technische Hochschule Ostwestfalen-Lippe, 2018.","apa":"urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. (2018). In M. Hoelscher, O. Hall, M. Cardinali, & J. Krick (Eds.), Heimat planen - Identifikation, Partizipation, Integration (Issue 4). Technische Hochschule Ostwestfalen-Lippe.","chicago":"Hoelscher, Martin, Oliver Hall, Marcel Cardinali, and Julia Krick, eds. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. Heimat planen - Identifikation, Partizipation, Integration. Technische Hochschule Ostwestfalen-Lippe, 2018.","short":"M. Hoelscher, O. Hall, M. Cardinali, J. Krick, eds., urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, Technische Hochschule Ostwestfalen-Lippe, 2018.","din1505-2-1":"Hoelscher, M. ; Hall, O. ; Cardinali, M. ; Krick, J. (Hrsg.): urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung : Technische Hochschule Ostwestfalen-Lippe, 2018","chicago-de":"Hoelscher, Martin, Oliver Hall, Marcel Cardinali und Julia Krick, Hrsg. 2018. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. Heimat planen - Identifikation, Partizipation, Integration. Technische Hochschule Ostwestfalen-Lippe."},"title":"urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung","status":"public","publisher":"Technische Hochschule Ostwestfalen-Lippe","department":[{"_id":"DEP1303"},{"_id":"DEP1055"}],"main_file_link":[{"url":"https://www.yumpu.com/de/document/read/63562600/urbanlab-magazin-08-2018-heimat-planen","open_access":"1"}],"year":"2018","issue":"4","abstract":[{"lang":"ger","text":"Seit 2016 erscheint das urbanLab Magazin jährlich als Fachzeitschrift für Stadt- und Regionalplanung mit dem Anspruch Forschung, Lehre und der Praxis in den Planungsdisziplinen des Spannungsfeldes Stadt und Quartier anhand konkreter Themencluster besser zu vernetzen. Wir geben zukunftsweisenden Ideen, Fachbeiträgen, Publikationen und kontroversen Diskussionen eine Plattform und bringen sie unterstützt durch Erkenntnisse aus unserer Forschung auf den Punkt."}]},{"year":2018,"main_file_link":[{"open_access":"1","url":"https://www.yumpu.com/de/document/read/63562629/urbanlab-magazin-03-2018-regionale-netzwerke"}],"department":[{"_id":"DEP1303"},{"_id":"DEP1055"}],"abstract":[{"lang":"ger","text":"Seit 2016 erscheint das urbanLab Magazin jährlich als Fachzeitschrift für Stadt- und Regionalplanung mit dem Anspruch Forschung, Lehre und der Praxis in den Planungsdisziplinen des Spannungsfeldes Stadt und Quartier anhand konkreter Themencluster besser zu vernetzen. Wir geben zukunftsweisenden Ideen, Fachbeiträgen, Publikationen und kontroversen Diskussionen eine Plattform und bringen sie unterstützt durch Erkenntnisse aus unserer Forschung auf den Punkt."}],"issue":"3","status":"public","title":"urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung","citation":{"apa":"Hall, O., Cardinali, M., Krick, J., & Technische Hochschule Ostwestfalen-Lippe (Eds.). (2018). urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. Regionale Netzwerke - Wachstum, Kooperation, Transformation.","chicago":"Hall, Oliver, Marcel Cardinali, Julia Krick, and Technische Hochschule Ostwestfalen-Lippe, eds. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. Regionale Netzwerke - Wachstum, Kooperation, Transformation, 2018.","van":"Hall O, Cardinali M, Krick J, Technische Hochschule Ostwestfalen-Lippe, editors. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. Regionale Netzwerke - Wachstum, Kooperation, Transformation. 2018.","mla":"Hall, Oliver, et al., editors. “urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung.” Regionale Netzwerke - Wachstum, Kooperation, Transformation, no. 3, 2018.","bjps":"Hall O et al. (eds) (2018) urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. .","havard":"O. Hall, M. Cardinali, J. Krick, Technische Hochschule Ostwestfalen-Lippe, eds., urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, 2018.","ufg":"Hall, Oliver et. al. (Hgg.) (2018): urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung.","short":"O. Hall, M. Cardinali, J. Krick, Technische Hochschule Ostwestfalen-Lippe, eds., urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, 2018.","din1505-2-1":"Hall, O. ; Cardinali, M. ; Krick, J. ; Technische Hochschule Ostwestfalen-Lippe (Hrsg.): urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, 2018","chicago-de":"Hall, Oliver, Marcel Cardinali, Julia Krick und Technische Hochschule Ostwestfalen-Lippe, Hrsg. 2018. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. Regionale Netzwerke - Wachstum, Kooperation, Transformation.","ieee":"O. Hall, M. Cardinali, J. Krick, and Technische Hochschule Ostwestfalen-Lippe, Eds., urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, no. 3. 2018.","ama":"Hall O, Cardinali M, Krick J, Technische Hochschule Ostwestfalen-Lippe, eds. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung.; 2018."},"publication_status":"published","oa":"1","language":[{"iso":"ger"}],"_id":"5361","publication_identifier":{"eissn":["2566-8919"],"issn":["2566-8900"]},"publication":"Regionale Netzwerke - Wachstum, Kooperation, Transformation","type":"journal_editor","date_created":"2021-03-30T10:35:39Z","user_id":"45673","date_updated":"2023-03-15T13:49:59Z","corporate_editor":["Technische Hochschule Ostwestfalen-Lippe","Forschungsschwerpunkt urbanLab"],"editor":[{"last_name":"Hall","id":"27136","first_name":"Oliver","full_name":"Hall, Oliver"},{"orcid":"0000-0002-8841-9345","first_name":"Marcel","id":"58462","full_name":"Cardinali, Marcel","last_name":"Cardinali"},{"last_name":"Krick","first_name":"Julia","id":"58606","full_name":"Krick, Julia"}]},{"title":"Contested Resilience of a Modern Structure or “Dissonant Heritage”: Multilayered Identity of the Old Belgrade Fairground","publication_status":"published","department":[{"_id":"DEP1000"},{"_id":"DEP1055"}],"conference":{"location":"Detmold","name":"RMB Conference 2017, facade2017, ConstructionLab // Annual Report 2015-17","start_date":"2017-11-23","end_date":"2017-11-24"},"ddc":["720"],"year":2017,"author":[{"id":"68875","first_name":"Anica","last_name":"Dragutinovic","full_name":"Dragutinovic, Anica","orcid":"0000-0002-6962-5223"},{"orcid":"0000-0002-8594-3168","first_name":"Uta","id":"27166","full_name":"Pottgiesser, Uta","last_name":"Pottgiesser"},{"full_name":"Melenhorst, Michael","id":"51438","last_name":"Melenhorst","first_name":"Michael"}],"abstract":[{"lang":"eng","text":"The Old Belgrade Fairground, a great example of the Early Modernism in Belgrade, underlined the modernization and Europeanization of the capital city of the Kingdom of Yugoslavia. The Fairground's construction in 1937 on the bare terrain of today's New Belgrade was the first step of urbanisation of Belgrade on the left bank of the Sava river and was followed by the construction of the modern city after WWII. During the 80 years long history, the purpose of the Old Belgrade Fairground has been changed several times creating multilayered identity of the urban complex. The Modern exhibition space of the inter-war period was transformed into the infamous concentration camp during WWII. Structures that survived the bombings were re-used as a habitat for youth brigades that participated in the construction of New Belgrade, while its previous purposes were suppressed. During the rebuilding of the city in the post-war period, the Old Belgrade Fairground was ignored. As forgotten place of memory it was partly adapted by artists into ateliers and partly became shelter for poor people. Despite its multileveled historical, cultural and architectural significance, the Old Belgrade Fairground today is neglected. Although a pioneer of Modern Movement in Belgrade, and at the same time an important memorial place, it is today a ruined structure that is decaying. Its multiple histories and \"too much identity\" created absence of any planned activity in order not to make a wrong one. After its ability to absorb different functions and adapt to huge transformations, its resilience is being contested by disability to balance the complex history. The paper investigates on the transformations and presents a concept of \"dissonant heritage\" as an instrument for renewal of the Old Belgrade Fairground that needs to use all of its complexity in order to truly recover from the past."}],"page":"9","status":"public","date_created":"2019-04-25T12:25:45Z","type":"conference","date_updated":"2023-03-15T13:49:37Z","user_id":"79260","editor":[{"first_name":"Michel","last_name":"Melenhorst","full_name":"Melenhorst, Michel","id":"51438"},{"full_name":"Pottgiesser, Uta","id":"27166","last_name":"Pottgiesser","first_name":"Uta","orcid":"0000-0002-8594-3168"},{"last_name":"Naumann","full_name":"Naumann, Christine","first_name":"Christine"},{"first_name":"Theresa","full_name":"Kellner, Theresa","last_name":"Kellner"}],"corporate_editor":["Hochschule Ostwestfalen-Lippe"],"language":[{"iso":"eng"}],"place":"Lemgo","keyword":["Old Belgrade Fairground","Modern Structure","Multilayered Identity","Resilience","Dissonant Heritage"],"doi":"10.25644/2412-8d28","_id":"1934"},{"date_created":"2019-11-25T08:35:54Z","publication":"International Journal On Advances in Intelligent Systems","publication_identifier":{"issn":["1942-2679"]},"date_updated":"2023-03-15T13:49:38Z","oa":"1","language":[{"iso":"eng"}],"keyword":["processing","Wavelet transformation."],"title":"Evaluation of Similarity Measures for Shift-Invariant Image Motif Discovery","volume":10,"citation":{"short":"S. Deppe, V. Lohweg, International Journal On Advances in Intelligent Systems 10 (2017) 434–446.","chicago-de":"Deppe, Sahar und Volker Lohweg. 2017. Evaluation of Similarity Measures for Shift-Invariant Image Motif Discovery. International Journal On Advances in Intelligent Systems 10, Nr. 3/4: 434–446.","din1505-2-1":"Deppe, Sahar ; Lohweg, Volker: Evaluation of Similarity Measures for Shift-Invariant Image Motif Discovery. In: International Journal On Advances in Intelligent Systems Bd. 10. [S.l.], IARIA Journals (2017), Nr. 3/4, S. 434–446","van":"Deppe S, Lohweg V. Evaluation of Similarity Measures for Shift-Invariant Image Motif Discovery. International Journal On Advances in Intelligent Systems. 2017;10(3/4):434–46.","bjps":"Deppe S and Lohweg V (2017) Evaluation of Similarity Measures for Shift-Invariant Image Motif Discovery. International Journal On Advances in Intelligent Systems 10, 434–446.","mla":"Deppe, Sahar, and Volker Lohweg. “Evaluation of Similarity Measures for Shift-Invariant Image Motif Discovery.” International Journal On Advances in Intelligent Systems, vol. 10, no. 3/4, IARIA Journals, 2017, pp. 434–46.","havard":"S. Deppe, V. Lohweg, Evaluation of Similarity Measures for Shift-Invariant Image Motif Discovery, International Journal On Advances in Intelligent Systems. 10 (2017) 434–446.","ufg":"Deppe, Sahar/Lohweg, Volker (2017): Evaluation of Similarity Measures for Shift-Invariant Image Motif Discovery, in: International Journal On Advances in Intelligent Systems 10 (3/4), S. 434–446.","apa":"Deppe, S., & Lohweg, V. (2017). Evaluation of Similarity Measures for Shift-Invariant Image Motif Discovery. International Journal On Advances in Intelligent Systems, 10(3/4), 434–446.","chicago":"Deppe, Sahar, and Volker Lohweg. “Evaluation of Similarity Measures for Shift-Invariant Image Motif Discovery.” International Journal On Advances in Intelligent Systems 10, no. 3/4 (2017): 434–46.","ama":"Deppe S, Lohweg V. Evaluation of Similarity Measures for Shift-Invariant Image Motif Discovery. International Journal On Advances in Intelligent Systems. 2017;10(3/4):434-446.","ieee":"S. Deppe and V. Lohweg, “Evaluation of Similarity Measures for Shift-Invariant Image Motif Discovery,” International Journal On Advances in Intelligent Systems, vol. 10, no. 3/4, pp. 434–446, 2017."},"main_file_link":[{"url":"http://www.iariajournals.org/intelligent_systems/intsys_v10_n34_2017_paged.pdf","open_access":"1"}],"year":2017,"author":[{"full_name":"Deppe, Sahar","first_name":"Sahar","id":"52121","last_name":"Deppe"},{"last_name":"Lohweg","id":"1804","full_name":"Lohweg, Volker","first_name":"Volker","orcid":"0000-0002-3325-7887"}],"page":"434 - 446","status":"public","type":"journal_article","intvolume":" 10","user_id":"45673","_id":"2012","place":" [S.l.]","publication_status":"published","abstract":[{"lang":"eng","text":"The rapid growth of optical imaging technologies increased the access and collection of data, which boosts the demand of data and knowledge discovery. This is a fast growing topic in several industry and research areas. Nowadays, a large number of images and signals must be analysed in order to gain and learn proper knowledge. Detecting images with similar contents without specifying an image, recently attracts the researches in image processing domain. Motif discovery in image processing aims to tackle the problem of deriving structures or detecting regularities in image databases. Most of the motif discovery methods solve this problem by converting images into one dimensional time series in a pre-processing step and then applying a motif discovery on these one dimensional time series for image motifs detection. Nevertheless, this conversion might lead to information loss and also the problem of inability to discover shifted and multi-scale image motifs of different size. Contrary to other approaches, here, a method is proposed to find image motifs of different size in image data sets by employing images in original dimension (2D) without converting them to one dimensional time series.\r\nThe proposed approach consists of three steps: Mapping or transformation, feature extraction and measuring similarities. First, images are inspected by the Complex Quad Tree Wavelet Packet transform, which provides broad frequency analysis of an image in various scales. Next, statistical features are extracted from the wavelet coefficients. Finally, image motifs are detected by measuring the similarity of the features applying various similarity measures. Here, the performance of six similarity measures are benchmarked in details. Moreover, the efficiency of the proposed method is demonstrated on a data set with images from diverse applications such as hand gesture, text recognition, leaf and plant identification, etc. Additionally, the robustness of this method is examined with the image data overlaying with distortions such as noise and blur."}],"issue":"3/4","department":[{"_id":"DEP5023"}],"publisher":"IARIA Journals"},{"_id":"2014","doi":" https://doi.org/10.3390/s17030601","article_number":"601","type":"journal_article","intvolume":" 17","user_id":"15514","abstract":[{"text":"Industrial applications are in transition towards modular and flexible architectures that are capable of self-configuration and -optimisation. This is due to the demand of mass customisation and the increasing complexity of industrial systems. The conversion to modular systems is related to challenges in all disciplines. Consequently, diverse tasks such as information processing, extensive networking, or system monitoring using sensor and information fusion systems need to be reconsidered. The focus of this contribution is on distributed sensor and information fusion systems for system monitoring, which must reflect the increasing flexibility of fusion systems. This contribution thus proposes an approach, which relies on a network of self-descriptive intelligent sensor nodes, for the automatic design and update of sensor and information fusion systems. This article encompasses the fusion system configuration and adaptation as well as communication aspects. Manual interaction with the flexibly changing system is reduced to a minimum.","lang":"eng"}],"issue":"3","department":[{"_id":"DEP5023"}],"publication_status":"published","oa":"1","keyword":["information fusion","intelligent sensor","knowledge-based system","self-configuration","sensor fusion"],"language":[{"iso":"eng"}],"publication":"Sensors","publication_identifier":{"issn":["1424-8220"]},"date_created":"2019-11-25T08:52:14Z","date_updated":"2023-03-15T13:49:38Z","year":2017,"author":[{"full_name":"Fritze, Alexander","first_name":"Alexander","last_name":"Fritze"},{"last_name":"Mönks","id":"1825","full_name":"Mönks, Uwe","first_name":"Uwe"},{"full_name":"Holst, Christoph-Alexander","last_name":"Holst","first_name":"Christoph-Alexander","id":"64782"},{"full_name":"Lohweg, Volker","first_name":"Volker","id":"1804","last_name":"Lohweg","orcid":"0000-0002-3325-7887"}],"main_file_link":[{"url":"https://www.mdpi.com/1424-8220/17/3/601/htm","open_access":"1"}],"status":"public","title":"An Approach to Automated Fusion System Design and Adaptation","citation":{"ama":"Fritze A, Mönks U, Holst C-A, Lohweg V. An Approach to Automated Fusion System Design and Adaptation. Sensors. 2017;17(3). doi: https://doi.org/10.3390/s17030601","ieee":"A. Fritze, U. Mönks, C.-A. Holst, and V. Lohweg, “An Approach to Automated Fusion System Design and Adaptation,” Sensors, vol. 17, no. 3, 2017.","van":"Fritze A, Mönks U, Holst C-A, Lohweg V. An Approach to Automated Fusion System Design and Adaptation. Sensors. 2017;17(3).","bjps":"Fritze A et al. (2017) An Approach to Automated Fusion System Design and Adaptation. Sensors 17.","mla":"Fritze, Alexander, et al. “An Approach to Automated Fusion System Design and Adaptation.” Sensors, vol. 17, no. 3, 601, 2017, doi: https://doi.org/10.3390/s17030601.","havard":"A. Fritze, U. Mönks, C.-A. Holst, V. Lohweg, An Approach to Automated Fusion System Design and Adaptation, Sensors. 17 (2017).","ufg":"Fritze, Alexander et. al. (2017): An Approach to Automated Fusion System Design and Adaptation, in: Sensors 17 (3).","apa":"Fritze, A., Mönks, U., Holst, C.-A., & Lohweg, V. (2017). An Approach to Automated Fusion System Design and Adaptation. Sensors, 17(3). https://doi.org/ https://doi.org/10.3390/s17030601","chicago":"Fritze, Alexander, Uwe Mönks, Christoph-Alexander Holst, and Volker Lohweg. “An Approach to Automated Fusion System Design and Adaptation.” Sensors 17, no. 3 (2017). https://doi.org/ https://doi.org/10.3390/s17030601.","short":"A. Fritze, U. Mönks, C.-A. Holst, V. Lohweg, Sensors 17 (2017).","din1505-2-1":"Fritze, Alexander ; Mönks, Uwe ; Holst, Christoph-Alexander ; Lohweg, Volker: An Approach to Automated Fusion System Design and Adaptation. In: Sensors Bd. 17 (2017), Nr. 3","chicago-de":"Fritze, Alexander, Uwe Mönks, Christoph-Alexander Holst und Volker Lohweg. 2017. An Approach to Automated Fusion System Design and Adaptation. Sensors 17, Nr. 3. doi: https://doi.org/10.3390/s17030601, ."},"volume":17},{"doi":"10.5220/0006115502930300","_id":"2015","place":" [Setúbal]","type":"conference","user_id":"15514","abstract":[{"lang":"eng","text":" In real-world scenarios it is not always possible to generate an appropriate number of measured objects for machine learning tasks. At the learning stage, for small/incomplete datasets it is nonetheless often possible to get high accuracies for several arbitrarily chosen classifiers. The fact is that many classifiers might perform accurately, but decision boundaries might be inadequate. In this situation, the decision supported by marginlike characteristics for the discrimination of classes might be taken into account. Accuracy as an exclusive measure is often not sufficient. To contribute to the solution of this problem, we present a margin-based approach originated from an existing refinement procedure. In our method, margin value is considered as optimisation criterion for the refinement of SVM models. The performance of the approach is evaluated on a real-world application dataset for Motor Drive Diagnosis coming from the field of intelligent autonomous systems in the context of I ndustry 4.0 paradigm as well as on several UCI Repository samples with different numbers of features and objects."}],"department":[{"_id":"DEP5023"}],"conference":{"name":"6. International Conference on Pattern Recognition Applications and Methods ","location":"Porto, Protugal","start_date":"2017-02-24","end_date":"2017-02-26"},"publisher":"SCITEPRESS - Science and Technology Publications, Lda.","publication_status":"published","oa":"1","language":[{"iso":"eng"}],"keyword":["Refinement of Classification","Robust Classification","Classification within Small/Incomplete Samples"],"date_created":"2019-11-25T08:59:43Z","publication":"Proceedings of the 6th International Conference on Pattern Recognition Applications and Methods","publication_identifier":{"isbn":["9789897582226"]},"date_updated":"2023-03-15T13:49:38Z","year":2017,"author":[{"full_name":"Dörksen, Helene","first_name":"Helene","id":"46416","last_name":"Dörksen"},{"id":"1804","full_name":"Lohweg, Volker","last_name":"Lohweg","first_name":"Volker","orcid":"0000-0002-3325-7887"}],"main_file_link":[{"open_access":"1","url":"http://www.scitepress.org/DigitalLibrary/Link.aspx?doi=10.5220/0006115502930300"}],"page":"293-300","status":"public","title":"Margin-based Refinement for Support-Vector-Machine Classification","citation":{"ama":"Dörksen H, Lohweg V. Margin-based Refinement for Support-Vector-Machine Classification. In: Proceedings of the 6th International Conference on Pattern Recognition Applications and Methods. [Setúbal]: SCITEPRESS - Science and Technology Publications, Lda.; 2017:293-300. doi:10.5220/0006115502930300","ieee":"H. Dörksen and V. Lohweg, “Margin-based Refinement for Support-Vector-Machine Classification,” in Proceedings of the 6th International Conference on Pattern Recognition Applications and Methods, Porto, Protugal, 2017, pp. 293–300.","short":"H. Dörksen, V. Lohweg, in: Proceedings of the 6th International Conference on Pattern Recognition Applications and Methods, SCITEPRESS - Science and Technology Publications, Lda., [Setúbal], 2017, pp. 293–300.","chicago-de":"Dörksen, Helene und Volker Lohweg. 2017. Margin-based Refinement for Support-Vector-Machine Classification. In: Proceedings of the 6th International Conference on Pattern Recognition Applications and Methods, 293–300. [Setúbal]: SCITEPRESS - Science and Technology Publications, Lda. doi:10.5220/0006115502930300, .","din1505-2-1":"Dörksen, Helene ; Lohweg, Volker: Margin-based Refinement for Support-Vector-Machine Classification. In: Proceedings of the 6th International Conference on Pattern Recognition Applications and Methods. [Setúbal] : SCITEPRESS - Science and Technology Publications, Lda., 2017, S. 293–300","van":"Dörksen H, Lohweg V. Margin-based Refinement for Support-Vector-Machine Classification. In: Proceedings of the 6th International Conference on Pattern Recognition Applications and Methods. [Setúbal]: SCITEPRESS - Science and Technology Publications, Lda.; 2017. p. 293–300.","mla":"Dörksen, Helene, and Volker Lohweg. “Margin-Based Refinement for Support-Vector-Machine Classification.” Proceedings of the 6th International Conference on Pattern Recognition Applications and Methods, SCITEPRESS - Science and Technology Publications, Lda., 2017, pp. 293–300, doi:10.5220/0006115502930300.","havard":"H. Dörksen, V. Lohweg, Margin-based Refinement for Support-Vector-Machine Classification, in: Proceedings of the 6th International Conference on Pattern Recognition Applications and Methods, SCITEPRESS - Science and Technology Publications, Lda., [Setúbal], 2017: pp. 293–300.","bjps":"Dörksen H and Lohweg V (2017) Margin-Based Refinement for Support-Vector-Machine Classification. Proceedings of the 6th International Conference on Pattern Recognition Applications and Methods. [Setúbal]: SCITEPRESS - Science and Technology Publications, Lda., pp. 293–300.","ufg":"Dörksen, Helene/Lohweg, Volker (2017): Margin-based Refinement for Support-Vector-Machine Classification, in: Proceedings of the 6th International Conference on Pattern Recognition Applications and Methods, [Setúbal], S. 293–300.","apa":"Dörksen, H., & Lohweg, V. (2017). Margin-based Refinement for Support-Vector-Machine Classification. In Proceedings of the 6th International Conference on Pattern Recognition Applications and Methods (pp. 293–300). [Setúbal]: SCITEPRESS - Science and Technology Publications, Lda. https://doi.org/10.5220/0006115502930300","chicago":"Dörksen, Helene, and Volker Lohweg. “Margin-Based Refinement for Support-Vector-Machine Classification.” In Proceedings of the 6th International Conference on Pattern Recognition Applications and Methods, 293–300. [Setúbal]: SCITEPRESS - Science and Technology Publications, Lda., 2017. https://doi.org/10.5220/0006115502930300."}},{"publication_identifier":{"eisbn":["978-3-7315-0726-0"]},"date_created":"2019-11-25T09:06:44Z","type":"conference","user_id":"15514","date_updated":"2023-03-15T13:49:38Z","oa":"1","_id":"2018","doi":"10.5445/KSP/1000074341","place":"Dortmund","language":[{"iso":"eng"}],"title":"Conflict-based Feature Selection for Information Fusion Systems","citation":{"short":"C.-A. Holst, U. Mönks, V. Lohweg, in: 27. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), Dortmund, 2017, pp. 279–295.","chicago-de":"Holst, Christoph-Alexander, Uwe Mönks und Volker Lohweg. 2017. Conflict-based Feature Selection for Information Fusion Systems. In: , 279–295. Dortmund: 27. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA). doi:10.5445/KSP/1000074341, .","din1505-2-1":"Holst, Christoph-Alexander ; Mönks, Uwe ; Lohweg, Volker: Conflict-based Feature Selection for Information Fusion Systems. In: . Dortmund : 27. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 2017, S. 279–295","ieee":"C.-A. Holst, U. Mönks, and V. Lohweg, “Conflict-based Feature Selection for Information Fusion Systems,” presented at the 27. Workshop Computational Intelligence , Dortmund, 2017, pp. 279–295.","apa":"Holst, C.-A., Mönks, U., & Lohweg, V. (2017). Conflict-based Feature Selection for Information Fusion Systems (pp. 279–295). Presented at the 27. Workshop Computational Intelligence , Dortmund: 27. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA). https://doi.org/10.5445/KSP/1000074341","chicago":"Holst, Christoph-Alexander, Uwe Mönks, and Volker Lohweg. “Conflict-Based Feature Selection for Information Fusion Systems,” 279–95. Dortmund: 27. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 2017. https://doi.org/10.5445/KSP/1000074341.","ama":"Holst C-A, Mönks U, Lohweg V. Conflict-based Feature Selection for Information Fusion Systems. In: Dortmund: 27. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA); 2017:279-295. doi:10.5445/KSP/1000074341","van":"Holst C-A, Mönks U, Lohweg V. Conflict-based Feature Selection for Information Fusion Systems. In Dortmund: 27. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA); 2017. p. 279–95.","havard":"C.-A. Holst, U. Mönks, V. Lohweg, Conflict-based Feature Selection for Information Fusion Systems, in: 27. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), Dortmund, 2017: pp. 279–295.","mla":"Holst, Christoph-Alexander, et al. Conflict-Based Feature Selection for Information Fusion Systems. 27. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 2017, pp. 279–95, doi:10.5445/KSP/1000074341.","bjps":"Holst C-A, Mönks U and Lohweg V (2017) Conflict-Based Feature Selection for Information Fusion Systems. Dortmund: 27. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), pp. 279–295.","ufg":"Holst, Christoph-Alexander et. al. (2017): Conflict-based Feature Selection for Information Fusion Systems, in: , Dortmund, S. 279–295."},"publication_status":"published","abstract":[{"text":"Applying information fusion systems aims at gaining information of higher quality and simultaneously decreasing computational and communicational efforts. An increased availability of sensors in industrial machines, but also in everyday life, results in large amounts of potential features. Each feature entails computational and communicational costs. An information fusion system may not require all features, supported by the available sensors, to fulfil its purpose. Feature selection methods reduce the amount of features with the aim to maintain or even increase performance. This contribution proposes a feature selection approach exploiting the inherent conflict between features and utilising a state-ofthe-art information fusion operator. The performance of the proposed method is evaluated in the scope of a publicly available data set and benchmarked against an established feature selection method. It is shown that the proposed approach is faster and produces more accurate feature subsets containing very few features, although the established method produces slightly better performing subsets for large feature subsets.","lang":"eng"}],"main_file_link":[{"open_access":"1","url":"https://d-nb.info/1147444048/34#page=291"}],"year":2017,"author":[{"first_name":"Christoph-Alexander","id":"64782","last_name":"Holst","full_name":"Holst, Christoph-Alexander"},{"full_name":"Mönks, Uwe","first_name":"Uwe","last_name":"Mönks","id":"1825"},{"last_name":"Lohweg","first_name":"Volker","full_name":"Lohweg, Volker","id":"1804","orcid":"0000-0002-3325-7887"}],"conference":{"name":"27. Workshop Computational Intelligence ","location":"Dortmund","end_date":"2017-11-24","start_date":"2017-11-23"},"department":[{"_id":"DEP5023"}],"publisher":"27. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA)","status":"public","page":"279-295"},{"_id":"2019","place":"(Submitted to Journal Archives of Data Sciences) Wrocław, Poland","language":[{"iso":"eng"}],"oa":"1","user_id":"68554","date_updated":"2023-03-15T13:49:38Z","publication":"4th European Conference on Data Analysis 2017 (ECDA 2017) ","date_created":"2019-11-25T09:06:46Z","type":"conference_abstract","status":"public","year":2017,"main_file_link":[{"open_access":"1","url":"https://www.researchgate.net/profile/Helene_Doerksen/publication/320352781_Margin-based_Refinement_for_Linear_Discriminant_Analysis_4th_European_Conference_on_Data_Analysis_ECDA_2017_Wroclaw_Poland_27-29_September_2017/links/59df674c45851593bea66c24/Margin-based-Refinement-for-Linear-Discriminant-Analysis-4th-European-Conference-on-Data-Analysis-ECDA-2017-Wroclaw-Poland-27-29-September-2017"}],"author":[{"last_name":"Dörksen","first_name":"Helene","id":"46416","full_name":"Dörksen, Helene"},{"orcid":"0000-0002-3325-7887","id":"1804","full_name":"Lohweg, Volker","first_name":"Volker","last_name":"Lohweg"}],"conference":{"end_date":"20197-09-29","start_date":"2017-09-27","location":"Wroclaw, Poland","name":"4th European Conference on Data Analysis (ECDA 2017)"},"department":[{"_id":"DEP5023"}],"citation":{"short":"H. Dörksen, V. Lohweg, in: 4th European Conference on Data Analysis 2017 (ECDA 2017) , (Submitted to Journal Archives of Data Sciences) Wrocław, Poland, 2017.","chicago-de":"Dörksen, Helene und Volker Lohweg. 2017. Margin-based Refinement for Linear Discriminant Analysis. In: 4th European Conference on Data Analysis 2017 (ECDA 2017) . (Submitted to Journal Archives of Data Sciences) Wrocław, Poland.","din1505-2-1":"Dörksen, Helene ; Lohweg, Volker: Margin-based Refinement for Linear Discriminant Analysis. In: 4th European Conference on Data Analysis 2017 (ECDA 2017) . (Submitted to Journal Archives of Data Sciences) Wrocław, Poland, 2017","ieee":"H. Dörksen and V. Lohweg, “Margin-based Refinement for Linear Discriminant Analysis,” in 4th European Conference on Data Analysis 2017 (ECDA 2017) , Wroclaw, Poland, 2017.","apa":"Dörksen, H., & Lohweg, V. (2017). Margin-based Refinement for Linear Discriminant Analysis. In 4th European Conference on Data Analysis 2017 (ECDA 2017) . (Submitted to Journal Archives of Data Sciences) Wrocław, Poland.","chicago":"Dörksen, Helene, and Volker Lohweg. “Margin-Based Refinement for Linear Discriminant Analysis.” In 4th European Conference on Data Analysis 2017 (ECDA 2017) . (Submitted to Journal Archives of Data Sciences) Wrocław, Poland, 2017.","ama":"Dörksen H, Lohweg V. Margin-based Refinement for Linear Discriminant Analysis. In: 4th European Conference on Data Analysis 2017 (ECDA 2017) . (Submitted to Journal Archives of Data Sciences) Wrocław, Poland; 2017.","van":"Dörksen H, Lohweg V. Margin-based Refinement for Linear Discriminant Analysis. In: 4th European Conference on Data Analysis 2017 (ECDA 2017) . (Submitted to Journal Archives of Data Sciences) Wrocław, Poland; 2017.","havard":"H. Dörksen, V. Lohweg, Margin-based Refinement for Linear Discriminant Analysis, in: 4th European Conference on Data Analysis 2017 (ECDA 2017) , (Submitted to Journal Archives of Data Sciences) Wrocław, Poland, 2017.","mla":"Dörksen, Helene, and Volker Lohweg. “Margin-Based Refinement for Linear Discriminant Analysis.” 4th European Conference on Data Analysis 2017 (ECDA 2017) , 2017.","bjps":"Dörksen H and Lohweg V (2017) Margin-Based Refinement for Linear Discriminant Analysis. 4th European Conference on Data Analysis 2017 (ECDA 2017) . (Submitted to Journal Archives of Data Sciences) Wrocław, Poland.","ufg":"Dörksen, Helene/Lohweg, Volker (2017): Margin-based Refinement for Linear Discriminant Analysis, in: 4th European Conference on Data Analysis 2017 (ECDA 2017) , (Submitted to Journal Archives of Data Sciences) Wrocław, Poland."},"publication_status":"published","title":"Margin-based Refinement for Linear Discriminant Analysis"},{"citation":{"chicago-de":"Lohweg, Volker. 2017. Autonome Sensoren - Wie sich die Produktion von morgen verändert wird, Forum Industrial Automation. In: Hannover Messe Industrie. doi:10.13140/RG.2.2.32546.63683 , .","din1505-2-1":"Lohweg, Volker: Autonome Sensoren - Wie sich die Produktion von morgen verändert wird, Forum Industrial Automation. In: Hannover Messe Industrie, 2017","short":"V. Lohweg, in: Hannover Messe Industrie, 2017.","ufg":"Lohweg, Volker (2017): Autonome Sensoren - Wie sich die Produktion von morgen verändert wird, Forum Industrial Automation, in: Hannover Messe Industrie.","bjps":"Lohweg V (2017) Autonome Sensoren - Wie sich die Produktion von morgen verändert wird, Forum Industrial Automation. Hannover Messe Industrie.","havard":"V. Lohweg, Autonome Sensoren - Wie sich die Produktion von morgen verändert wird, Forum Industrial Automation, in: Hannover Messe Industrie, 2017.","mla":"Lohweg, Volker. “Autonome Sensoren - Wie sich die Produktion von morgen verändert wird, Forum Industrial Automation.” Hannover Messe Industrie, 2017, doi:10.13140/RG.2.2.32546.63683 .","van":"Lohweg V. Autonome Sensoren - Wie sich die Produktion von morgen verändert wird, Forum Industrial Automation. In: Hannover Messe Industrie. 2017.","ama":"Lohweg V. Autonome Sensoren - Wie sich die Produktion von morgen verändert wird, Forum Industrial Automation. In: Hannover Messe Industrie. ; 2017. doi:10.13140/RG.2.2.32546.63683 ","chicago":"Lohweg, Volker. “Autonome Sensoren - Wie sich die Produktion von morgen verändert wird, Forum Industrial Automation.” In Hannover Messe Industrie, 2017. https://doi.org/10.13140/RG.2.2.32546.63683 .","apa":"Lohweg, V. (2017). Autonome Sensoren - Wie sich die Produktion von morgen verändert wird, Forum Industrial Automation. In Hannover Messe Industrie. Hannover. https://doi.org/10.13140/RG.2.2.32546.63683 ","ieee":"V. Lohweg, “Autonome Sensoren - Wie sich die Produktion von morgen verändert wird, Forum Industrial Automation,” in Hannover Messe Industrie, Hannover, 2017."},"publication_status":"published","title":"Autonome Sensoren - Wie sich die Produktion von morgen verändert wird, Forum Industrial Automation","status":"public","abstract":[{"text":"Sensor- und Informationsfusion spielt in heutigen Fertigungsanlagen als Enabler-Technologie eine entscheidende Rolle. Dabei ist es entscheidend, dass die Sensoren ein gewisse Autonomie im Rahmen ihrer Messaufgabe besitzen. Der Vortrag zielt darauf ab, einen Ansatz zur Informationsfusion vorzustellen, der darlegt, wie Sensoren sich im Kontext einer Aufgabe selbständig adaptieren und eine Kommunikation mit weiteren Sensoren aufbauen können, um verdichtete Informationen über ein Messobjekt zu generieren.","lang":"ger"}],"main_file_link":[{"url":"https://www.researchgate.net/profile/Volker_Lohweg/publication/316582794_Autonome_Sensoren_-_Wie_sich_die_Produktion_von_morgen_verandert_wird/links/5904fd7fa6fdccd580d18f1a/Autonome-Sensoren-Wie-sich-die-Produktion-von-morgen-veraendert-wird.pdf"}],"year":2017,"author":[{"orcid":"0000-0002-3325-7887","last_name":"Lohweg","full_name":"Lohweg, Volker","first_name":"Volker","id":"1804"}],"department":[{"_id":"DEP5023"}],"conference":{"location":"Hannover","name":"Forum Insustrial Automation ","start_date":"2017-04-24","end_date":"2017-04-28"},"user_id":"15514","date_updated":"2023-03-15T13:49:38Z","publication":"Hannover Messe Industrie","date_created":"2019-11-25T09:06:49Z","type":"conference","_id":"2021","doi":"10.13140/RG.2.2.32546.63683 ","language":[{"iso":"ger"}]},{"status":"public","page":"27-32","main_file_link":[{"open_access":"1","url":"http://www.thinkmind.org/index.php?view=instance&instance=PESARO+2017"}],"author":[{"first_name":"Sahar","last_name":"Deppe","id":"52121","full_name":"Deppe, Sahar"},{"last_name":"Lohweg","first_name":"Volker","id":"1804","full_name":"Lohweg, Volker","orcid":"0000-0002-3325-7887"}],"year":2017,"citation":{"ieee":"S. Deppe and V. Lohweg, “Shift-Invariant Motif Discovery in Image Processing ‘Best Paper Award,’” in PESARO 2017 The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications, Venice, Italy , 2017, pp. 27–32.","ama":"Deppe S, Lohweg V. Shift-Invariant Motif Discovery in Image Processing “Best Paper Award.” In: Leister W, ed. PESARO 2017 The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications. PESARO 2017; Venice, Italy : The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications; Special track MAIS: Machine Learning Algorithms in Image and Signal Processing; 2017:27-32.","apa":"Deppe, S., & Lohweg, V. (2017). Shift-Invariant Motif Discovery in Image Processing “Best Paper Award.” In W. Leister (Ed.), PESARO 2017 The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications (pp. 27–32). PESARO 2017; Venice, Italy : The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications; Special track MAIS: Machine Learning Algorithms in Image and Signal Processing.","chicago":"Deppe, Sahar, and Volker Lohweg. “Shift-Invariant Motif Discovery in Image Processing ‘Best Paper Award.’” In PESARO 2017 The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications, edited by Wolfgang Leister, 27–32. PESARO 2017; Venice, Italy : The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications; Special track MAIS: Machine Learning Algorithms in Image and Signal Processing, 2017.","van":"Deppe S, Lohweg V. Shift-Invariant Motif Discovery in Image Processing “Best Paper Award.” In: Leister W, editor. PESARO 2017 The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications. PESARO 2017; Venice, Italy : The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications; Special track MAIS: Machine Learning Algorithms in Image and Signal Processing; 2017. p. 27–32.","ufg":"Deppe, Sahar/Lohweg, Volker (2017): Shift-Invariant Motif Discovery in Image Processing „Best Paper Award“, in: Wolfgang Leister (Hg.): PESARO 2017 The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications, PESARO 2017; Venice, Italy , S. 27–32.","mla":"Deppe, Sahar, and Volker Lohweg. “Shift-Invariant Motif Discovery in Image Processing ‘Best Paper Award.’” PESARO 2017 The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications, edited by Wolfgang Leister, The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications; Special track MAIS: Machine Learning Algorithms in Image and Signal Processing, 2017, pp. 27–32.","havard":"S. Deppe, V. Lohweg, Shift-Invariant Motif Discovery in Image Processing “Best Paper Award,” in: W. Leister (Ed.), PESARO 2017 The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications, The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications; Special track MAIS: Machine Learning Algorithms in Image and Signal Processing, PESARO 2017; Venice, Italy , 2017: pp. 27–32.","bjps":"Deppe S and Lohweg V (2017) Shift-Invariant Motif Discovery in Image Processing ‘Best Paper Award’. In Leister W (ed.), PESARO 2017 The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications. PESARO 2017; Venice, Italy : The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications; Special track MAIS: Machine Learning Algorithms in Image and Signal Processing, pp. 27–32.","short":"S. Deppe, V. Lohweg, in: W. Leister (Ed.), PESARO 2017 The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications, The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications; Special track MAIS: Machine Learning Algorithms in Image and Signal Processing, PESARO 2017; Venice, Italy , 2017, pp. 27–32.","din1505-2-1":"Deppe, Sahar ; Lohweg, Volker: Shift-Invariant Motif Discovery in Image Processing „Best Paper Award“. In: Leister, W. (Hrsg.): PESARO 2017 The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications. PESARO 2017; Venice, Italy : The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications; Special track MAIS: Machine Learning Algorithms in Image and Signal Processing, 2017, S. 27–32","chicago-de":"Deppe, Sahar und Volker Lohweg. 2017. Shift-Invariant Motif Discovery in Image Processing „Best Paper Award“. In: PESARO 2017 The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications, hg. von Wolfgang Leister, 27–32. PESARO 2017; Venice, Italy : The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications; Special track MAIS: Machine Learning Algorithms in Image and Signal Processing."},"title":"Shift-Invariant Motif Discovery in Image Processing 'Best Paper Award'","keyword":["Motif discovery","Image processing","Wavelet transformation"],"language":[{"iso":"eng"}],"oa":"1","date_updated":"2023-03-15T13:49:38Z","editor":[{"last_name":"Leister","first_name":"Wolfgang","full_name":"Leister, Wolfgang"}],"publication_identifier":{"eissn":["2308-3700"],"eisbn":["978-1-61208-549-4"]},"publication":"PESARO 2017 The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications","date_created":"2019-11-25T09:06:50Z","publisher":"The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications; Special track MAIS: Machine Learning Algorithms in Image and Signal Processing","department":[{"_id":"DEP5023"}],"conference":{"start_date":"2017-04-23","end_date":"2017-04-27","location":"Venice, Italy ","name":"7. International Conference on Performance (PESARO 2017)"},"abstract":[{"text":"Nowadays, the boost of optical imaging technologies results in more data with a faster rate are being collected. Consequently, data and knowledge discovery science has become an attractive and a fast growing topic in several industry and research area. Motif discovery in image processing aims to tackle the problem of deriving structures or detecting regularities in image databases. Most of the motif discovery methods first convert images into time series and then attempt to find motifs in such data. This might lead to information loss and also the problem of inability to detect shifted and multi-scale image motifs of different size. Here, a method is proposed to find image motifs of different size in image datasets by applying images in original dimension without converting them to time series. Images are inspected by the Complex Quad Tree Wavelet Packet transform which provides broad frequency analysis of an image in various scales. Next, features are extracted from the wavelet coefficients. Finally, image motifs are detected by measuring the similarity of the features. The performance of the proposed method is demonstrated on a dataset with images from diverse applications, such as hand gesture, text recognition, leaf and plant identification, etc. ","lang":"eng"}],"publication_status":"published","place":"PESARO 2017; Venice, Italy ","_id":"2022","user_id":"15514","type":"conference"},{"citation":{"din1505-2-1":"Deppe, Sahar ; Lohweg, Volker: Survey on Time Series Motif Discovery. In: WIREs : Forensic science Bd. 7. Danvers, MA , Wiley-Blackwell (2017), Nr. 2","chicago-de":"Deppe, Sahar und Volker Lohweg. 2017. Survey on Time Series Motif Discovery. WIREs : Forensic science 7, Nr. 2. doi: https://doi.org/10.1002/widm.1199, .","short":"S. Deppe, V. Lohweg, WIREs : Forensic Science 7 (2017).","chicago":"Deppe, Sahar, and Volker Lohweg. “Survey on Time Series Motif Discovery.” WIREs : Forensic Science 7, no. 2 (2017). https://doi.org/ https://doi.org/10.1002/widm.1199.","apa":"Deppe, S., & Lohweg, V. (2017). Survey on Time Series Motif Discovery. WIREs : Forensic Science, 7(2). https://doi.org/ https://doi.org/10.1002/widm.1199","ieee":"S. Deppe and V. Lohweg, “Survey on Time Series Motif Discovery,” WIREs : Forensic science, vol. 7, no. 2, 2017.","ufg":"Deppe, Sahar/Lohweg, Volker (2017): Survey on Time Series Motif Discovery, in: WIREs : Forensic science 7 (2).","mla":"Deppe, Sahar, and Volker Lohweg. “Survey on Time Series Motif Discovery.” WIREs : Forensic Science, vol. 7, no. 2, Wiley-Blackwell , 2017, doi: https://doi.org/10.1002/widm.1199.","havard":"S. Deppe, V. Lohweg, Survey on Time Series Motif Discovery, WIREs : Forensic Science. 7 (2017).","bjps":"Deppe S and Lohweg V (2017) Survey on Time Series Motif Discovery. WIREs : Forensic science 7.","van":"Deppe S, Lohweg V. Survey on Time Series Motif Discovery. WIREs : Forensic science. 2017;7(2).","ama":"Deppe S, Lohweg V. Survey on Time Series Motif Discovery. WIREs : Forensic science. 2017;7(2). doi: https://doi.org/10.1002/widm.1199"},"volume":7,"title":"Survey on Time Series Motif Discovery","status":"public","year":2017,"author":[{"id":"52121","full_name":"Deppe, Sahar","last_name":"Deppe","first_name":"Sahar"},{"orcid":"0000-0002-3325-7887","full_name":"Lohweg, Volker","id":"1804","first_name":"Volker","last_name":"Lohweg"}],"date_updated":"2023-03-15T13:49:38Z","date_created":"2019-11-25T09:06:51Z","publication":" WIREs : Forensic science","publication_identifier":{"eissn":["2573-9468 "]},"language":[{"iso":"eng"}],"publication_status":"published","publisher":"Wiley-Blackwell ","abstract":[{"text":"Last decades witness a huge growth in medical applications, genetic analysis,and in performance of manufacturing technologies and automatised productionsystems. A challenging task is to identify and diagnose the behavior of suchsystems, which aim to produce a product with desired quality. In order to con-trol the state of the systems, various information is gathered from differenttypes of sensors (optical, acoustic, chemical, electric, and thermal). Time seriesdata are a set of real-valued variables obtained chronologically. Data miningand machine learning help derive meaningful knowledge from time series.Such tasks include clustering, classification, anomaly detection andmotif discov-ery. Motif discovery attempts tofind meaningful, new, and unknown knowledgefrom data. Detection of motifs in a time series is beneficial for, e.g., discovery ofrules or specific events in a signal. Motifs provide useful information for theuser in order to model or analyze the data. Motif discovery is applied to variousareas as telecommunication, medicine, web, motion-capture, and sensornetworks. This contribution provides a review of the existing publications intime series motif discovery along with advantages and disadvantages of existingapproaches. Moreover, the research issues and missing points in thisfield arehighlighted. The main objective of this focus article is to serve as a glossary forresearchers in thisfield.","lang":"eng"}],"issue":"2","department":[{"_id":"DEP5023"}],"intvolume":" 7","user_id":"15514","type":"journal_article","doi":" https://doi.org/10.1002/widm.1199","_id":"2023","place":" Danvers, MA "},{"type":"conference","date_created":"2020-11-23T17:38:30Z","user_id":"74004","date_updated":"2023-03-15T13:49:50Z","_id":"4020","language":[{"iso":"eng"}],"title":"Model-Based Development of Transmission Concepts for Hybrid Electric Powertrains","citation":{"ama":"Geng S, Zubke T, Schulte T. Model-Based Development of Transmission Concepts for Hybrid Electric Powertrains. In: IEEE; 2017:1637-1642.","ieee":"S. Geng, T. Zubke, and T. Schulte, “Model-Based Development of Transmission Concepts for Hybrid Electric Powertrains,” presented at the 2017 IEEE Intelligent Vehicles Symposium (IV), Los Angeles, CA, USA , 2017, pp. 1637–1642.","short":"S. Geng, T. Zubke, T. Schulte, in: IEEE, 2017, pp. 1637–1642.","din1505-2-1":"Geng, Stefan ; Zubke, T. ; Schulte, Thomas: Model-Based Development of Transmission Concepts for Hybrid Electric Powertrains. In: : IEEE, 2017, S. 1637–1642","chicago-de":"Geng, Stefan, T. Zubke und Thomas Schulte. 2017. Model-Based Development of Transmission Concepts for Hybrid Electric Powertrains. In: , 1637–1642. IEEE.","van":"Geng S, Zubke T, Schulte T. Model-Based Development of Transmission Concepts for Hybrid Electric Powertrains. In IEEE; 2017. p. 1637–42.","bjps":"Geng S, Zubke T and Schulte T (2017) Model-Based Development of Transmission Concepts for Hybrid Electric Powertrains. IEEE, pp. 1637–1642.","mla":"Geng, Stefan, et al. Model-Based Development of Transmission Concepts for Hybrid Electric Powertrains. IEEE, 2017, pp. 1637–42.","havard":"S. Geng, T. Zubke, T. Schulte, Model-Based Development of Transmission Concepts for Hybrid Electric Powertrains, in: IEEE, 2017: pp. 1637–1642.","ufg":"Geng, Stefan et. al. (2017): Model-Based Development of Transmission Concepts for Hybrid Electric Powertrains, in: , S. 1637–1642.","apa":"Geng, S., Zubke, T., & Schulte, T. (2017). Model-Based Development of Transmission Concepts for Hybrid Electric Powertrains (pp. 1637–1642). Presented at the 2017 IEEE Intelligent Vehicles Symposium (IV), Los Angeles, CA, USA : IEEE.","chicago":"Geng, Stefan, T. Zubke, and Thomas Schulte. “Model-Based Development of Transmission Concepts for Hybrid Electric Powertrains,” 1637–42. IEEE, 2017."},"abstract":[{"text":"Plug-in hybrid electric vehicles (PHEV) are developed to reduce the fuel consumption and the emission of carbon dioxide. The transmission is a core component in PHEVs since it defines the interaction between the internal combustion engine and the electric motors. Due to the complexity of PHEVs, a model-based development is carried out for novel transmission concepts, which takes the overall powertrain into account, as well. In this contribution, an approach for the model-based development of transmission concepts for PHEVs is presented. It incorporates the development and evaluation of new concepts as well as the development and test of corresponding controllers. Since each step of the development requires a powertrain model with an appropriate level of detail, an automatic model generation is used to enable an efficient workflow. This contribution focuses on the development of new transmission concepts only. It comprises an optimization of the number of gears and transmission ratios for an exemplary transmission. As a result of the proposed approach a novel transmission concept for PHEVs including a model-based evaluation is presented.","lang":"eng"}],"year":2017,"author":[{"first_name":"Stefan","id":"43696","last_name":"Geng","full_name":"Geng, Stefan"},{"last_name":"Zubke","full_name":"Zubke, T.","first_name":"T."},{"last_name":"Schulte","first_name":"Thomas","full_name":"Schulte, Thomas","id":"46242"}],"department":[{"_id":"DEP6020"}],"conference":{"end_date":"2017-06-14","start_date":"2017-06-11","name":"2017 IEEE Intelligent Vehicles Symposium (IV)","location":"Los Angeles, CA, USA "},"publisher":"IEEE","status":"public","page":"1637 - 1642"},{"intvolume":" 9","date_updated":"2023-03-15T13:49:50Z","user_id":"74004","type":"journal_article","date_created":"2020-11-23T19:05:21Z","publication":"World Electric Vehicle Journal","_id":"4031","language":[{"iso":"eng"}],"place":"Basel","publication_status":"published","volume":9,"citation":{"ieee":"S. Geng, A. Meier, and T. Schulte, “Model-Based Optimization of a Plug-In Hybrid Electric Powertrain with Multimode Transmission,” World Electric Vehicle Journal, vol. 9, no. 1, p. 12, 2017.","ama":"Geng S, Meier A, Schulte T. Model-Based Optimization of a Plug-In Hybrid Electric Powertrain with Multimode Transmission. World Electric Vehicle Journal. 2017;9(1):12.","apa":"Geng, S., Meier, A., & Schulte, T. (2017). Model-Based Optimization of a Plug-In Hybrid Electric Powertrain with Multimode Transmission. World Electric Vehicle Journal, 9(1), 12.","chicago":"Geng, Stefan, A. Meier, and Thomas Schulte. “Model-Based Optimization of a Plug-In Hybrid Electric Powertrain with Multimode Transmission.” World Electric Vehicle Journal 9, no. 1 (2017): 12.","van":"Geng S, Meier A, Schulte T. Model-Based Optimization of a Plug-In Hybrid Electric Powertrain with Multimode Transmission. World Electric Vehicle Journal. 2017;9(1):12.","ufg":"Geng, Stefan et. al. (2017): Model-Based Optimization of a Plug-In Hybrid Electric Powertrain with Multimode Transmission, in: World Electric Vehicle Journal 9 (1), S. 12.","havard":"S. Geng, A. Meier, T. Schulte, Model-Based Optimization of a Plug-In Hybrid Electric Powertrain with Multimode Transmission, World Electric Vehicle Journal. 9 (2017) 12.","mla":"Geng, Stefan, et al. “Model-Based Optimization of a Plug-In Hybrid Electric Powertrain with Multimode Transmission.” World Electric Vehicle Journal, vol. 9, no. 1, MDPI, 2017, p. 12.","bjps":"Geng S, Meier A and Schulte T (2017) Model-Based Optimization of a Plug-In Hybrid Electric Powertrain with Multimode Transmission. World Electric Vehicle Journal 9, 12.","short":"S. Geng, A. Meier, T. Schulte, World Electric Vehicle Journal 9 (2017) 12.","chicago-de":"Geng, Stefan, A. Meier und Thomas Schulte. 2017. Model-Based Optimization of a Plug-In Hybrid Electric Powertrain with Multimode Transmission. World Electric Vehicle Journal 9, Nr. 1: 12.","din1505-2-1":"Geng, Stefan ; Meier, A. ; Schulte, Thomas: Model-Based Optimization of a Plug-In Hybrid Electric Powertrain with Multimode Transmission. In: World Electric Vehicle Journal Bd. 9. Basel, MDPI (2017), Nr. 1, S. 12"},"title":"Model-Based Optimization of a Plug-In Hybrid Electric Powertrain with Multimode Transmission","publisher":"MDPI","page":"12","status":"public","issue":"1","abstract":[{"text":"Plug-in hybrid electric vehicles are developed in order to reduce the fuel consumption and the emission of carbon dioxide. Besides the series, parallel and power split configurations are commonly used for conventional hybrid electric vehicles, and multimode transmissions are used for plug-in hybrid electric vehicles, which are able to switch between different modes like parallel or series operation of the combustion engine and electric motor. Several concepts have already been discussed and presented. These concepts comprise novel structures and multi-speed operation for the combustion engine and the electric motor, respectively. For improving the fuel and energy consumption, model-based optimizations of multimode transmissions are performed. In the first step of the optimization, the optimal number of gears and transmission ratios, as well as the corresponding fuel and energy savings, are estimated. Based on these results, a new multimode transmission concept with two-speed transmissions for the combustion engine and the electric motor has been developed. The knowledge of the concrete concept enables the further optimizations of the transmission ratios and the transmission control. In order to prove the benefit of the new and optimized transmission concept, powertrain simulations have been carried out. The new powertrain concept is compared to a powertrain concept with single-speed transmissions for the internal combustion engine (ICE) and electric motor operation. The new transmission concept enables a significant improvement of the fuel consumption.","lang":"eng"}],"conference":{"location":"Stuttgart","name":"30th Electric Vehicle Symposium & Exhibition"},"department":[{"_id":"DEP6020"}],"main_file_link":[{"url":"https://www.mdpi.com/2032-6653/9/1/12"}],"year":2017,"author":[{"id":"43696","last_name":"Geng","full_name":"Geng, Stefan","first_name":"Stefan"},{"last_name":"Meier","first_name":"A.","full_name":"Meier, A."},{"last_name":"Schulte","first_name":"Thomas","id":"46242","full_name":"Schulte, Thomas"}]},{"publisher":"Gesellschaft für Informatik e.V.","status":"public","abstract":[{"lang":"eng","text":"Im Kontext von Industrie 4.0 nimmt die Gestaltung der Mensch-Maschine-Schnittstelle eine herausragende Stellung ein. Folglich müssen neue technologische und menschzentrierte Ansätze zur Unterstützung von Menschen in Smart Factories entwickelt und erforscht werden. In Lemgo wurde zu Forschungs- und Demonstrationszwecken die SmartFactoryOWL errichtet. In diesem Beitrag geben wir einen Überblick über die SmartFactoryOWL und ihren Beitrag zur hiesigen HCI-Forschung. Wir zeigen, wie diese Einrichtung unsere Forschung an neuen Systemen, wie z. B. Systemen zur Informations- und Wissensvernetzung in Smart Factories beiträgt. Weiterhin präsentieren wir in diesem Beitrag AR-Cube, eine durchgängige Lösung für eine Smart-Factory-Lernumgebung, welche die Remote-Interaktion zwischen Produktionssystemen innerhalb und außerhalb der SmartFactoryOWL ermöglicht. Mit der Workshop-Teilnahme wollen wir unsere hier skizzierten Konzepte und Visionen gerne in der HCI-Community diskutieren und die Grundlage für zukünftige Weiterentwicklungen legen."}],"year":2017,"author":[{"first_name":"Sebastian","full_name":"Büttner, Sebastian","id":"61868","last_name":"Büttner"},{"full_name":"Mucha, Henrik","first_name":"Henrik","last_name":"Mucha","id":"64896"},{"last_name":"Robert","first_name":"Sebastian","full_name":"Robert, Sebastian"},{"full_name":"Hellweg, Fabian","first_name":"Fabian","last_name":"Hellweg"},{"first_name":"Carsten","last_name":"Röcker","id":"61525","full_name":"Röcker, Carsten"}],"main_file_link":[{"open_access":"1"}],"department":[{"_id":"DEP5023"}],"conference":{"start_date":"2017-09-10","end_date":"2017-09-13","location":"Regensburg","name":"Mensch und Computer 2017"},"citation":{"ieee":"S. Büttner, H. Mucha, S. Robert, F. Hellweg, and C. Röcker, “HCI in der SmartFactoryOWL – Angewandte Forschung Entwicklung,” in 4. Workshop zu Smart Factories: Mitarbeiter-zentrierte Informationssysteme für die Zusammenarbeit der Zukunft, Mensch und Computer 2017, Regensburg, 2017.","ama":"Büttner S, Mucha H, Robert S, Hellweg F, Röcker C. HCI in der SmartFactoryOWL – Angewandte Forschung Entwicklung. In: 4. Workshop zu Smart Factories: Mitarbeiter-zentrierte Informationssysteme für die Zusammenarbeit der Zukunft, Mensch und Computer 2017. Bonn: Gesellschaft für Informatik e.V.; 2017. doi:10.18420/muc2017-ws04-0389","apa":"Büttner, S., Mucha, H., Robert, S., Hellweg, F., & Röcker, C. (2017). HCI in der SmartFactoryOWL – Angewandte Forschung Entwicklung. In 4. Workshop zu Smart Factories: Mitarbeiter-zentrierte Informationssysteme für die Zusammenarbeit der Zukunft, Mensch und Computer 2017. Bonn: Gesellschaft für Informatik e.V. https://doi.org/10.18420/muc2017-ws04-0389","chicago":"Büttner, Sebastian, Henrik Mucha, Sebastian Robert, Fabian Hellweg, and Carsten Röcker. “HCI in der SmartFactoryOWL – Angewandte Forschung Entwicklung.” In 4. Workshop zu Smart Factories: Mitarbeiter-zentrierte Informationssysteme für die Zusammenarbeit der Zukunft, Mensch und Computer 2017. Bonn: Gesellschaft für Informatik e.V., 2017. https://doi.org/10.18420/muc2017-ws04-0389.","van":"Büttner S, Mucha H, Robert S, Hellweg F, Röcker C. HCI in der SmartFactoryOWL – Angewandte Forschung Entwicklung. In: 4 Workshop zu Smart Factories: Mitarbeiter-zentrierte Informationssysteme für die Zusammenarbeit der Zukunft, Mensch und Computer 2017. Bonn: Gesellschaft für Informatik e.V.; 2017.","havard":"S. Büttner, H. Mucha, S. Robert, F. Hellweg, C. Röcker, HCI in der SmartFactoryOWL – Angewandte Forschung Entwicklung, in: 4. Workshop zu Smart Factories: Mitarbeiter-zentrierte Informationssysteme für die Zusammenarbeit der Zukunft, Mensch und Computer 2017, Gesellschaft für Informatik e.V., Bonn, 2017.","mla":"Büttner, Sebastian, et al. “HCI in der SmartFactoryOWL – Angewandte Forschung Entwicklung.” 4. Workshop zu Smart Factories: Mitarbeiter-zentrierte Informationssysteme für die Zusammenarbeit der Zukunft, Mensch und Computer 2017, Gesellschaft für Informatik e.V., 2017, doi:10.18420/muc2017-ws04-0389.","bjps":"Büttner S et al. (2017) HCI in der SmartFactoryOWL – Angewandte Forschung Entwicklung. 4. Workshop zu Smart Factories: Mitarbeiter-zentrierte Informationssysteme für die Zusammenarbeit der Zukunft, Mensch und Computer 2017. Bonn: Gesellschaft für Informatik e.V.","ufg":"Büttner, Sebastian et. al. (2017): HCI in der SmartFactoryOWL – Angewandte Forschung Entwicklung, in: 4. Workshop zu Smart Factories: Mitarbeiter-zentrierte Informationssysteme für die Zusammenarbeit der Zukunft, Mensch und Computer 2017, Bonn.","short":"S. Büttner, H. Mucha, S. Robert, F. Hellweg, C. Röcker, in: 4. Workshop zu Smart Factories: Mitarbeiter-zentrierte Informationssysteme für die Zusammenarbeit der Zukunft, Mensch und Computer 2017, Gesellschaft für Informatik e.V., Bonn, 2017.","chicago-de":"Büttner, Sebastian, Henrik Mucha, Sebastian Robert, Fabian Hellweg und Carsten Röcker. 2017. HCI in der SmartFactoryOWL – Angewandte Forschung Entwicklung. In: 4. Workshop zu Smart Factories: Mitarbeiter-zentrierte Informationssysteme für die Zusammenarbeit der Zukunft, Mensch und Computer 2017. Bonn: Gesellschaft für Informatik e.V. doi:10.18420/muc2017-ws04-0389, .","din1505-2-1":"Büttner, Sebastian ; Mucha, Henrik ; Robert, Sebastian ; Hellweg, Fabian ; Röcker, Carsten: HCI in der SmartFactoryOWL – Angewandte Forschung Entwicklung. In: 4. Workshop zu Smart Factories: Mitarbeiter-zentrierte Informationssysteme für die Zusammenarbeit der Zukunft, Mensch und Computer 2017. Bonn : Gesellschaft für Informatik e.V., 2017"},"publication_status":"published","title":"HCI in der SmartFactoryOWL – Angewandte Forschung Entwicklung","_id":"4251","doi":"10.18420/muc2017-ws04-0389","place":"Bonn","language":[{"iso":"ger"}],"oa":"1","user_id":"15514","date_updated":"2023-03-15T13:49:51Z","publication":"4. Workshop zu Smart Factories: Mitarbeiter-zentrierte Informationssysteme für die Zusammenarbeit der Zukunft, Mensch und Computer 2017","date_created":"2020-12-10T13:39:59Z","type":"conference"},{"user_id":"15514","date_updated":"2023-03-15T13:49:51Z","publication":"Doktorandenseminar, Mensch und Computer 2017","type":"conference","date_created":"2020-12-10T13:40:01Z","place":"Bonn","language":[{"iso":"ger"}],"_id":"4252","citation":{"ama":"Büttner S. Menschzentrierte Dienste in der Fabrik der Zukunft – ein Framework für adaptive projektionsbasierte AR-Assistenz. In: Doktorandenseminar, Mensch und Computer 2017. Bonn: Gesellschaft für Informatik e.V.; 2017.","ieee":"S. Büttner, “Menschzentrierte Dienste in der Fabrik der Zukunft – ein Framework für adaptive projektionsbasierte AR-Assistenz,” in Doktorandenseminar, Mensch und Computer 2017, Regensburg, 2017.","van":"Büttner S. Menschzentrierte Dienste in der Fabrik der Zukunft – ein Framework für adaptive projektionsbasierte AR-Assistenz. In: Doktorandenseminar, Mensch und Computer 2017. Bonn: Gesellschaft für Informatik e.V.; 2017.","ufg":"Büttner, Sebastian (2017): Menschzentrierte Dienste in der Fabrik der Zukunft – ein Framework für adaptive projektionsbasierte AR-Assistenz, in: Doktorandenseminar, Mensch und Computer 2017, Bonn.","bjps":"Büttner S (2017) Menschzentrierte Dienste in der Fabrik der Zukunft – ein Framework für adaptive projektionsbasierte AR-Assistenz. Doktorandenseminar, Mensch und Computer 2017. Bonn: Gesellschaft für Informatik e.V.","havard":"S. Büttner, Menschzentrierte Dienste in der Fabrik der Zukunft – ein Framework für adaptive projektionsbasierte AR-Assistenz, in: Doktorandenseminar, Mensch und Computer 2017, Gesellschaft für Informatik e.V., Bonn, 2017.","mla":"Büttner, Sebastian. “Menschzentrierte Dienste in der Fabrik der Zukunft – ein Framework für adaptive projektionsbasierte AR-Assistenz.” Doktorandenseminar, Mensch und Computer 2017, Gesellschaft für Informatik e.V., 2017.","apa":"Büttner, S. (2017). Menschzentrierte Dienste in der Fabrik der Zukunft – ein Framework für adaptive projektionsbasierte AR-Assistenz. In Doktorandenseminar, Mensch und Computer 2017. Bonn: Gesellschaft für Informatik e.V.","chicago":"Büttner, Sebastian. “Menschzentrierte Dienste in der Fabrik der Zukunft – ein Framework für adaptive projektionsbasierte AR-Assistenz.” In Doktorandenseminar, Mensch und Computer 2017. Bonn: Gesellschaft für Informatik e.V., 2017.","short":"S. Büttner, in: Doktorandenseminar, Mensch und Computer 2017, Gesellschaft für Informatik e.V., Bonn, 2017.","din1505-2-1":"Büttner, Sebastian: Menschzentrierte Dienste in der Fabrik der Zukunft – ein Framework für adaptive projektionsbasierte AR-Assistenz. In: Doktorandenseminar, Mensch und Computer 2017. Bonn : Gesellschaft für Informatik e.V., 2017","chicago-de":"Büttner, Sebastian. 2017. Menschzentrierte Dienste in der Fabrik der Zukunft – ein Framework für adaptive projektionsbasierte AR-Assistenz. In: Doktorandenseminar, Mensch und Computer 2017. Bonn: Gesellschaft für Informatik e.V."},"publication_status":"published","title":"Menschzentrierte Dienste in der Fabrik der Zukunft – ein Framework für adaptive projektionsbasierte AR-Assistenz","status":"public","publisher":"Gesellschaft für Informatik e.V.","year":2017,"author":[{"first_name":"Sebastian","last_name":"Büttner","id":"61868","full_name":"Büttner, Sebastian"}],"conference":{"start_date":"2017-09-10","end_date":"2017-09-13","name":"Mensch und Computer 2017","location":"Regensburg"},"department":[{"_id":"DEP5023"}]},{"date_created":"2020-12-10T13:40:04Z","publication_identifier":{"eisbn":["9783319668086 "],"isbn":["978-3-319-66807-9"]},"publication":" Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings","date_updated":"2023-03-15T13:49:51Z","editor":[{"last_name":"Holzinger","first_name":"Andreas","full_name":"Holzinger, Andreas"}],"oa":"1","language":[{"iso":"eng"}],"keyword":["Alarm flood reduction","Machine learning","Assistive system"],"title":"Managing Complexity: Towards Intelligent Error-Handling Assistance Trough Interactive Alarm Flood Reduction","citation":{"ieee":"S. Büttner, P. Wunderlich, M. Heinz, O. Niggemann, and C. Röcker, “Managing Complexity: Towards Intelligent Error-Handling Assistance Trough Interactive Alarm Flood Reduction,” in Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, Reggio, Italy, 2017, vol. 10410, pp. 69–82.","ama":"Büttner S, Wunderlich P, Heinz M, Niggemann O, Röcker C. Managing Complexity: Towards Intelligent Error-Handling Assistance Trough Interactive Alarm Flood Reduction. In: Holzinger A, ed. Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings. Vol 10410. Lecture Notes in Computer Science . Cham: Springer; 2017:69-82.","din1505-2-1":"Büttner, Sebastian ; Wunderlich, Paul ; Heinz, Mario ; Niggemann, Oliver ; Röcker, Carsten: Managing Complexity: Towards Intelligent Error-Handling Assistance Trough Interactive Alarm Flood Reduction. In: Holzinger, A. (Hrsg.): Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, Lecture Notes in Computer Science . Bd. 10410. Cham : Springer, 2017, S. 69–82","chicago-de":"Büttner, Sebastian, Paul Wunderlich, Mario Heinz, Oliver Niggemann und Carsten Röcker. 2017. Managing Complexity: Towards Intelligent Error-Handling Assistance Trough Interactive Alarm Flood Reduction. In: Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, hg. von Andreas Holzinger, 10410:69–82. Lecture Notes in Computer Science . Cham: Springer.","short":"S. Büttner, P. Wunderlich, M. Heinz, O. Niggemann, C. Röcker, in: A. Holzinger (Ed.), Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, Springer, Cham, 2017, pp. 69–82.","chicago":"Büttner, Sebastian, Paul Wunderlich, Mario Heinz, Oliver Niggemann, and Carsten Röcker. “Managing Complexity: Towards Intelligent Error-Handling Assistance Trough Interactive Alarm Flood Reduction.” In Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, edited by Andreas Holzinger, 10410:69–82. Lecture Notes in Computer Science . Cham: Springer, 2017.","apa":"Büttner, S., Wunderlich, P., Heinz, M., Niggemann, O., & Röcker, C. (2017). Managing Complexity: Towards Intelligent Error-Handling Assistance Trough Interactive Alarm Flood Reduction. In A. Holzinger (Ed.), Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings (Vol. 10410, pp. 69–82). Cham: Springer.","bjps":"Büttner S et al. (2017) Managing Complexity: Towards Intelligent Error-Handling Assistance Trough Interactive Alarm Flood Reduction. In Holzinger A (ed.), Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, vol. 10410. Cham: Springer, pp. 69–82.","mla":"Büttner, Sebastian, et al. “Managing Complexity: Towards Intelligent Error-Handling Assistance Trough Interactive Alarm Flood Reduction.” Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, edited by Andreas Holzinger, vol. 10410, Springer, 2017, pp. 69–82.","havard":"S. Büttner, P. Wunderlich, M. Heinz, O. Niggemann, C. Röcker, Managing Complexity: Towards Intelligent Error-Handling Assistance Trough Interactive Alarm Flood Reduction, in: A. Holzinger (Ed.), Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, Springer, Cham, 2017: pp. 69–82.","ufg":"Büttner, Sebastian et. al. (2017): Managing Complexity: Towards Intelligent Error-Handling Assistance Trough Interactive Alarm Flood Reduction, in: Andreas Holzinger (Hg.): Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings (=Lecture Notes in Computer Science 10410), Cham, S. 69–82.","van":"Büttner S, Wunderlich P, Heinz M, Niggemann O, Röcker C. Managing Complexity: Towards Intelligent Error-Handling Assistance Trough Interactive Alarm Flood Reduction. In: Holzinger A, editor. Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 84, 89, 129 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings. Cham: Springer; 2017. p. 69–82. (Lecture Notes in Computer Science ; vol. 10410)."},"volume":10410,"main_file_link":[{"open_access":"1"}],"year":2017,"author":[{"last_name":"Büttner","first_name":"Sebastian","full_name":"Büttner, Sebastian","id":"61868"},{"first_name":"Paul","last_name":"Wunderlich","id":"52317","full_name":"Wunderlich, Paul"},{"first_name":"Mario","id":"68913","full_name":"Heinz, Mario","last_name":"Heinz"},{"last_name":"Niggemann","first_name":"Oliver","full_name":"Niggemann, Oliver","id":"10876"},{"id":"61525","full_name":"Röcker, Carsten","first_name":"Carsten","last_name":"Röcker"}],"page":"69-82","status":"public","type":"conference","user_id":"15514","intvolume":" 10410","place":"Cham","_id":"4254","series_title":"Lecture Notes in Computer Science ","publication_status":"published","conference":{"end_date":"2017-09-01","start_date":"2017-08-29","name":"International Cross-Domain Conference, CD-MAKE 2017","location":"Reggio, Italy"},"department":[{"_id":"DEP5023"}],"abstract":[{"text":"The current trend of integrating machines and factories into cyber-physical systems (CPS) creates an enormous complexity for operators of such systems. Especially the search for the root cause of cascading failures becomes highly time-consuming. Within this paper, we address the question on how to help human users to better and faster understand root causes of such situations. We propose a concept of interactive alarm flood reduction and present the implementation of a first vertical prototype for such a system. We consider this prototype as a first artifact to be discussed by the research community and aim towards an incremental further development of the system in order to support humans in complex error situations.","lang":"eng"}],"publisher":"Springer"},{"oa":"1","keyword":["Assistance systems","Smart factory","Production processes"],"language":[{"iso":"eng"}],"publication":" Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings","publication_identifier":{"isbn":["978-3-319-66807-9"],"eisbn":["9783319668086 "]},"date_created":"2020-12-10T13:40:05Z","date_updated":"2023-03-15T13:49:51Z","editor":[{"first_name":"Andreas","last_name":"Holzinger","full_name":"Holzinger, Andreas"}],"year":2017,"author":[{"full_name":"Fellmann, Michael","first_name":"Michael","last_name":"Fellmann"},{"full_name":"Robert, Sebastian","first_name":"Sebastian","last_name":"Robert"},{"first_name":"Sebastian","id":"61868","full_name":"Büttner, Sebastian","last_name":"Büttner"},{"first_name":"Henrik","full_name":"Mucha, Henrik","last_name":"Mucha","id":"64896"},{"last_name":"Röcker","full_name":"Röcker, Carsten","id":"61525","first_name":"Carsten"}],"main_file_link":[{"open_access":"1"}],"status":"public","page":"59-68","title":"Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories","volume":10410,"citation":{"ama":"Fellmann M, Robert S, Büttner S, Mucha H, Röcker C. Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories. In: Holzinger A, ed. Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings. Vol 10410. Lecture Notes in Computer Science . Cham: Springer; 2017:59-68. doi:10.1007/978-3-319-66808-6_5","ieee":"M. Fellmann, S. Robert, S. Büttner, H. Mucha, and C. Röcker, “Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories,” in Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, Reggio, Italy, 2017, vol. 10410, pp. 59–68.","bjps":"Fellmann M et al. (2017) Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories. In Holzinger A (ed.), Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, vol. 10410. Cham: Springer, pp. 59–68.","mla":"Fellmann, Michael, et al. “Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories.” Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, edited by Andreas Holzinger, vol. 10410, Springer, 2017, pp. 59–68, doi:10.1007/978-3-319-66808-6_5.","havard":"M. Fellmann, S. Robert, S. Büttner, H. Mucha, C. Röcker, Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories, in: A. Holzinger (Ed.), Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, Springer, Cham, 2017: pp. 59–68.","ufg":"Fellmann, Michael et. al. (2017): Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories, in: Andreas Holzinger (Hg.): Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings (=Lecture Notes in Computer Science 10410), Cham, S. 59–68.","van":"Fellmann M, Robert S, Büttner S, Mucha H, Röcker C. Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories. In: Holzinger A, editor. Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 84, 89, 129 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings. Cham: Springer; 2017. p. 59–68. (Lecture Notes in Computer Science ; vol. 10410).","chicago":"Fellmann, Michael, Sebastian Robert, Sebastian Büttner, Henrik Mucha, and Carsten Röcker. “Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories.” In Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, edited by Andreas Holzinger, 10410:59–68. Lecture Notes in Computer Science . Cham: Springer, 2017. https://doi.org/10.1007/978-3-319-66808-6_5.","apa":"Fellmann, M., Robert, S., Büttner, S., Mucha, H., & Röcker, C. (2017). Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories. In A. Holzinger (Ed.), Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings (Vol. 10410, pp. 59–68). Cham: Springer. https://doi.org/10.1007/978-3-319-66808-6_5","din1505-2-1":"Fellmann, Michael ; Robert, Sebastian ; Büttner, Sebastian ; Mucha, Henrik ; Röcker, Carsten: Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories. In: Holzinger, A. (Hrsg.): Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, Lecture Notes in Computer Science . Bd. 10410. Cham : Springer, 2017, S. 59–68","chicago-de":"Fellmann, Michael, Sebastian Robert, Sebastian Büttner, Henrik Mucha und Carsten Röcker. 2017. Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories. In: Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, hg. von Andreas Holzinger, 10410:59–68. Lecture Notes in Computer Science . Cham: Springer. doi:10.1007/978-3-319-66808-6_5, .","short":"M. Fellmann, S. Robert, S. Büttner, H. Mucha, C. Röcker, in: A. Holzinger (Ed.), Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, Springer, Cham, 2017, pp. 59–68."},"place":"Cham","_id":"4255","doi":"10.1007/978-3-319-66808-6_5","type":"conference","user_id":"15514","intvolume":" 10410","conference":{"start_date":"2017-08-29","end_date":"2017-09-01","location":"Reggio, Italy","name":"International Cross-Domain Conference, CD-MAKE 2017"},"department":[{"_id":"DEP5023"}],"abstract":[{"lang":"eng","text":"Increasingly, production processes are enabled and controlled by Information Technology (IT), a development being also referred to as “Industry 4.0”. IT thereby contributes to flexible and adaptive production processes, and in this sense factories become “smart factories”. In line with this, IT also more and more supports human workers via various assistance systems. This support aims to both support workers to better execute their tasks and to reduce the effort and time required when working. However, due to the large spectrum of assistance systems, it is hard to acquire an overview and to select an adequate system for a smart factory based on meaningful criteria. We therefore synthesize a set of comparison criteria into a consistent framework and demonstrate the application of our framework by classifying three examples."}],"publisher":"Springer","series_title":"Lecture Notes in Computer Science ","publication_status":"published"},{"_id":"4257","doi":"10.1007/978-3-319-60474-9_21","place":"Cham","type":"conference","intvolume":" 606","user_id":"15514","abstract":[{"text":"The selection of suitable display technologies for industrial augmented reality (AR) applications is becoming increasingly relevant as such applications move from the proof-of-concept to the application stage. To support project managers, designers and developers in the critical selection process we have developed a checklist of important aspects and related evaluation hints that helps to speed up and improve the selection process. The checklist presented in this paper was designed to be useful for both researchers and practitioners. It combines pertinent information from relevant standards like ISO 9241-210 with results from current research literature and experience from several AR projects in industrial contexts. It can be applied both in collaboration with AR experts, where it helps to prepare relevant information for the collaboration and thus streamlines the process, or stand-alone, as a guideline for the evaluation of different options by a design team. ","lang":"eng"}],"department":[{"_id":"DEP5023"}],"conference":{"start_date":"2017-07-17","end_date":"2017-07-21","name":"Proceedings of the AHFE 2017 International Conference on Human Aspects of Advanced Manufacturing","location":"Los Angeles, California, USA"},"publisher":"Springer","series_title":" Advances in Intelligent Systems and Computing","publication_status":"published","oa":"1","keyword":["Augmented reality","Displays","Evaluation","Checklist","Context of use","Human-Computer interaction"],"language":[{"iso":"eng"}],"publication":"Advances in Ergonomics of Manufacturing: Managing the Enterprise of the Future.","publication_identifier":{"issn":["2194-5357"],"eisbn":["978-3-319-60474-9"],"isbn":["978-3-319-60473-2"],"eissn":["2194-5365"]},"date_created":"2020-12-10T13:40:08Z","editor":[{"full_name":"Trzcielinski, Stefan","first_name":"Stefan","last_name":"Trzcielinski"}],"date_updated":"2023-03-15T13:49:51Z","main_file_link":[{"open_access":"1"}],"author":[{"full_name":"Paelke, Volker","first_name":"Volker","last_name":"Paelke"},{"full_name":"Büttner, Sebastian","first_name":"Sebastian","last_name":"Büttner","id":"61868"},{"id":"64896","last_name":"Mucha","full_name":"Mucha, Henrik","first_name":"Henrik"},{"full_name":"Röcker, Carsten","last_name":"Röcker","id":"61525","first_name":"Carsten"}],"year":2017,"status":"public","page":"225-234","title":"A Checklist-Based Approach for Evaluating Augmented Reality Displays in Industrial Applications","volume":606,"citation":{"ieee":"V. Paelke, S. Büttner, H. Mucha, and C. Röcker, “A Checklist-Based Approach for Evaluating Augmented Reality Displays in Industrial Applications,” in Advances in Ergonomics of Manufacturing: Managing the Enterprise of the Future., Los Angeles, California, USA, 2017, vol. 606, pp. 225–234.","apa":"Paelke, V., Büttner, S., Mucha, H., & Röcker, C. (2017). A Checklist-Based Approach for Evaluating Augmented Reality Displays in Industrial Applications. In S. Trzcielinski (Ed.), Advances in Ergonomics of Manufacturing: Managing the Enterprise of the Future. (Vol. 606, pp. 225–234). Cham: Springer. https://doi.org/10.1007/978-3-319-60474-9_21","chicago":"Paelke, Volker, Sebastian Büttner, Henrik Mucha, and Carsten Röcker. “A Checklist-Based Approach for Evaluating Augmented Reality Displays in Industrial Applications.” In Advances in Ergonomics of Manufacturing: Managing the Enterprise of the Future., edited by Stefan Trzcielinski, 606:225–34. Advances in Intelligent Systems and Computing. Cham: Springer, 2017. https://doi.org/10.1007/978-3-319-60474-9_21.","ama":"Paelke V, Büttner S, Mucha H, Röcker C. A Checklist-Based Approach for Evaluating Augmented Reality Displays in Industrial Applications. In: Trzcielinski S, ed. Advances in Ergonomics of Manufacturing: Managing the Enterprise of the Future. Vol 606. Advances in Intelligent Systems and Computing. Cham: Springer; 2017:225-234. doi:10.1007/978-3-319-60474-9_21","van":"Paelke V, Büttner S, Mucha H, Röcker C. A Checklist-Based Approach for Evaluating Augmented Reality Displays in Industrial Applications. In: Trzcielinski S, editor. Advances in Ergonomics of Manufacturing: Managing the Enterprise of the Future. Cham: Springer; 2017. p. 225–34. ( Advances in Intelligent Systems and Computing; vol. 606).","havard":"V. Paelke, S. Büttner, H. Mucha, C. Röcker, A Checklist-Based Approach for Evaluating Augmented Reality Displays in Industrial Applications, in: S. Trzcielinski (Ed.), Advances in Ergonomics of Manufacturing: Managing the Enterprise of the Future., Springer, Cham, 2017: pp. 225–234.","mla":"Paelke, Volker, et al. “A Checklist-Based Approach for Evaluating Augmented Reality Displays in Industrial Applications.” Advances in Ergonomics of Manufacturing: Managing the Enterprise of the Future., edited by Stefan Trzcielinski, vol. 606, Springer, 2017, pp. 225–34, doi:10.1007/978-3-319-60474-9_21.","bjps":"Paelke V et al. (2017) A Checklist-Based Approach for Evaluating Augmented Reality Displays in Industrial Applications. In Trzcielinski S (ed.), Advances in Ergonomics of Manufacturing: Managing the Enterprise of the Future., vol. 606. Cham: Springer, pp. 225–234.","ufg":"Paelke, Volker et. al. (2017): A Checklist-Based Approach for Evaluating Augmented Reality Displays in Industrial Applications, in: Stefan Trzcielinski (Hg.): Advances in Ergonomics of Manufacturing: Managing the Enterprise of the Future. (= Advances in Intelligent Systems and Computing 606), Cham, S. 225–234.","short":"V. Paelke, S. Büttner, H. Mucha, C. Röcker, in: S. Trzcielinski (Ed.), Advances in Ergonomics of Manufacturing: Managing the Enterprise of the Future., Springer, Cham, 2017, pp. 225–234.","din1505-2-1":"Paelke, Volker ; Büttner, Sebastian ; Mucha, Henrik ; Röcker, Carsten: A Checklist-Based Approach for Evaluating Augmented Reality Displays in Industrial Applications. In: Trzcielinski, S. (Hrsg.): Advances in Ergonomics of Manufacturing: Managing the Enterprise of the Future., Advances in Intelligent Systems and Computing. Bd. 606. Cham : Springer, 2017, S. 225–234","chicago-de":"Paelke, Volker, Sebastian Büttner, Henrik Mucha und Carsten Röcker. 2017. A Checklist-Based Approach for Evaluating Augmented Reality Displays in Industrial Applications. In: Advances in Ergonomics of Manufacturing: Managing the Enterprise of the Future., hg. von Stefan Trzcielinski, 606:225–234. Advances in Intelligent Systems and Computing. Cham: Springer. doi:10.1007/978-3-319-60474-9_21, ."}},{"language":[{"iso":"eng"}],"keyword":["Applied computing","Operations research","Operations research","Human-centered computing","Human computer interaction (HCI)","Interaction paradigms"],"oa":"1","related_material":{"link":[{"relation":"other","url":"https://www.th-owl.de/elsa/librecat/record/edit/4258"},{"url":"https://www.th-owl.de/elsa/librecat/record/edit/4258","relation":"other"}]},"date_updated":"2023-03-15T13:49:51Z","date_created":"2020-12-10T13:40:09Z","publication":"10th ACM International Conference on PErvasive Technologies Related to Assistive Environments (PETRA '17) ","publication_identifier":{"eisbn":["978-1-4503-5227-7"]},"page":"433440","status":"public","year":2017,"main_file_link":[{"open_access":"1"}],"author":[{"full_name":"Büttner, Sebastian","id":"61868","last_name":"Büttner","first_name":"Sebastian"},{"full_name":"Mucha, Henrik","last_name":"Mucha","id":"64896","first_name":"Henrik"},{"last_name":"Funk","first_name":"Markus","full_name":"Funk, Markus"},{"first_name":"Thomas","full_name":"Kosch, Thomas","last_name":"Kosch"},{"full_name":"Aehnelt, Mario","last_name":"Aehnelt","first_name":"Mario"},{"first_name":"Sebastian","last_name":"Robert","full_name":"Robert, Sebastian"},{"first_name":"Carsten","last_name":"Röcker","full_name":"Röcker, Carsten","id":"61525"}],"citation":{"chicago":"Büttner, Sebastian, Henrik Mucha, Markus Funk, Thomas Kosch, Mario Aehnelt, Sebastian Robert, and Carsten Röcker. “The Design Space of Augmented and Virtual Reality Applications for Assistive Environments in Manufacturing: A Visual Approach.” In 10th ACM International Conference on PErvasive Technologies Related to Assistive Environments (PETRA ’17) , 433440. Rhodos, Griechenland: ACM, 2017. https://doi.org/10.1145/3056540.3076193.","apa":"Büttner, S., Mucha, H., Funk, M., Kosch, T., Aehnelt, M., Robert, S., & Röcker, C. (2017). The Design Space of Augmented and Virtual Reality Applications for Assistive Environments in Manufacturing: A Visual Approach. 10th ACM International Conference on PErvasive Technologies Related to Assistive Environments (PETRA ’17) , 433440. https://doi.org/10.1145/3056540.3076193","ieee":"S. Büttner et al., “The Design Space of Augmented and Virtual Reality Applications for Assistive Environments in Manufacturing: A Visual Approach,” in 10th ACM International Conference on PErvasive Technologies Related to Assistive Environments (PETRA ’17) , Rhodes, Greece, 2017, p. 433440. doi: 10.1145/3056540.3076193.","ufg":"Büttner, Sebastian u. a.: The Design Space of Augmented and Virtual Reality Applications for Assistive Environments in Manufacturing: A Visual Approach, in: o. Hg.: 10th ACM International Conference on PErvasive Technologies Related to Assistive Environments (PETRA ’17) , Rhodos, Griechenland 2017, S. 433440.","havard":"S. Büttner, H. Mucha, M. Funk, T. Kosch, M. Aehnelt, S. Robert, C. Röcker, The Design Space of Augmented and Virtual Reality Applications for Assistive Environments in Manufacturing: A Visual Approach, in: 10th ACM International Conference on PErvasive Technologies Related to Assistive Environments (PETRA ’17) , ACM, Rhodos, Griechenland, 2017: p. 433440.","bjps":"Büttner S et al. (2017) The Design Space of Augmented and Virtual Reality Applications for Assistive Environments in Manufacturing: A Visual Approach. 10th ACM International Conference on PErvasive Technologies Related to Assistive Environments (PETRA ’17) . Rhodos, Griechenland: ACM, p. 433440.","mla":"Büttner, Sebastian, et al. “The Design Space of Augmented and Virtual Reality Applications for Assistive Environments in Manufacturing: A Visual Approach.” 10th ACM International Conference on PErvasive Technologies Related to Assistive Environments (PETRA ’17) , ACM, 2017, p. 433440, https://doi.org/10.1145/3056540.3076193.","van":"Büttner S, Mucha H, Funk M, Kosch T, Aehnelt M, Robert S, et al. The Design Space of Augmented and Virtual Reality Applications for Assistive Environments in Manufacturing: A Visual Approach. In: 10th ACM International Conference on PErvasive Technologies Related to Assistive Environments (PETRA ’17) . Rhodos, Griechenland: ACM; 2017. p. 433440.","ama":"Büttner S, Mucha H, Funk M, et al. The Design Space of Augmented and Virtual Reality Applications for Assistive Environments in Manufacturing: A Visual Approach. In: 10th ACM International Conference on PErvasive Technologies Related to Assistive Environments (PETRA ’17) . ACM; 2017:433440. doi:10.1145/3056540.3076193","chicago-de":"Büttner, Sebastian, Henrik Mucha, Markus Funk, Thomas Kosch, Mario Aehnelt, Sebastian Robert und Carsten Röcker. 2017. The Design Space of Augmented and Virtual Reality Applications for Assistive Environments in Manufacturing: A Visual Approach. In: 10th ACM International Conference on PErvasive Technologies Related to Assistive Environments (PETRA ’17) , 433440. Rhodos, Griechenland: ACM. doi:10.1145/3056540.3076193, .","din1505-2-1":"Büttner, Sebastian ; Mucha, Henrik ; Funk, Markus ; Kosch, Thomas ; Aehnelt, Mario ; Robert, Sebastian ; Röcker, Carsten: The Design Space of Augmented and Virtual Reality Applications for Assistive Environments in Manufacturing: A Visual Approach. In: 10th ACM International Conference on PErvasive Technologies Related to Assistive Environments (PETRA ’17) . Rhodos, Griechenland : ACM, 2017, S. 433440","short":"S. Büttner, H. Mucha, M. Funk, T. Kosch, M. Aehnelt, S. Robert, C. Röcker, in: 10th ACM International Conference on PErvasive Technologies Related to Assistive Environments (PETRA ’17) , ACM, Rhodos, Griechenland, 2017, p. 433440."},"title":"The Design Space of Augmented and Virtual Reality Applications for Assistive Environments in Manufacturing: A Visual Approach","doi":"10.1145/3056540.3076193","_id":"4258","place":"Rhodos, Griechenland","user_id":"79260","type":"conference","publisher":"ACM","abstract":[{"lang":"eng","text":"Research on how to take advantage of Augmented Reality and Virtual Reality applications and technologies in the domain of manufacturing has brought forward a great number of concepts, prototypes, and working systems. Although comprehensive surveys have taken account of the state of the art, the design space of industrial augmented and virtual reality keeps diversifying. We propose a visual approach towards assessing this space and present an interactive, community-driven tool which supports interested researchers and practitioners in gaining an overview of the aforementioned design space. Using such a framework we collected and classified relevant publications in terms of application areas and technology platforms. This tool shall facilitate initial research activities as well as the identification of research opportunities. Thus, we lay the groundwork, forthcoming workshops and discussions shall address the refinement."}],"conference":{"start_date":"2017-06-21","end_date":"2017-06-23","name":"PETRA '17: Proceedings of the 10th International Conference on PErvasive Technologies Related to Assistive Environments","location":"Rhodes, Greece"},"department":[{"_id":"DEP5023"}],"publication_status":"published"},{"type":"conference","user_id":"15514","intvolume":" 10217","place":"Cham","doi":"10.1007/978-3-319-56997-0_3","_id":"4259","series_title":" Lecture Notes in Computer Science ","publication_status":"published","conference":{"start_date":"2017-04-26","end_date":"2017-04-28","location":" Malaga, Spain","name":"13. European Conference on Ambient Intelligence"},"department":[{"_id":"DEP5023"}],"abstract":[{"lang":"eng","text":"This paper presents a prototype of an intelligent assistive system for workers in stationary manual assembly using projection-based augmented reality (AR) and intelligent hand tracking. By using depth cameras, the system can track the hands of the user and makes the user aware of wrong picking actions or errors in the assembly process. The system automatically adapts the digital projection-based overlay according to the current work situation. The main research contribution of our work is the presentation of a novel hand-tracking algorithm. In addition, we present the results of an user study of the system that shows the challenges and opportunities of our system and the hand-tracking algorithm in particular. We assume that our results will inform the future design of assistive systems in manual assembly."}],"publisher":"Springer","date_created":"2020-12-10T13:40:11Z","publication_identifier":{"eisbn":["978-3-319-56997-0"],"isbn":["978-3-319-56996-3"]},"publication":"European Conference on Ambient Intelligence","date_updated":"2023-03-15T13:49:51Z","language":[{"iso":"eng"}],"keyword":["Augmented reality","Mobile projection","Hand tracking","Manufacturing","Industry 4.0"],"title":"Exploring Design Opportunities for Intelligent Worker Assistance: A New Approach Using Projetion-Based AR and a Novel Hand-Tracking Algorithm","citation":{"apa":"Büttner, S., Sand, O., & Röcker, C. (2017). Exploring Design Opportunities for Intelligent Worker Assistance: A New Approach Using Projetion-Based AR and a Novel Hand-Tracking Algorithm. In European Conference on Ambient Intelligence (Vol. 10217, pp. 33–45). Cham: Springer. https://doi.org/10.1007/978-3-319-56997-0_3","chicago":"Büttner, Sebastian, Oliver Sand, and Carsten Röcker. “Exploring Design Opportunities for Intelligent Worker Assistance: A New Approach Using Projetion-Based AR and a Novel Hand-Tracking Algorithm.” In European Conference on Ambient Intelligence, 10217:33–45. Lecture Notes in Computer Science . Cham: Springer, 2017. https://doi.org/10.1007/978-3-319-56997-0_3.","van":"Büttner S, Sand O, Röcker C. Exploring Design Opportunities for Intelligent Worker Assistance: A New Approach Using Projetion-Based AR and a Novel Hand-Tracking Algorithm. In: European Conference on Ambient Intelligence. Cham: Springer; 2017. p. 33–45. ( Lecture Notes in Computer Science ; vol. 10217).","havard":"S. Büttner, O. Sand, C. Röcker, Exploring Design Opportunities for Intelligent Worker Assistance: A New Approach Using Projetion-Based AR and a Novel Hand-Tracking Algorithm, in: European Conference on Ambient Intelligence, Springer, Cham, 2017: pp. 33–45.","bjps":"Büttner S, Sand O and Röcker C (2017) Exploring Design Opportunities for Intelligent Worker Assistance: A New Approach Using Projetion-Based AR and a Novel Hand-Tracking Algorithm. European Conference on Ambient Intelligence, vol. 10217. Cham: Springer, pp. 33–45.","mla":"Büttner, Sebastian, et al. “Exploring Design Opportunities for Intelligent Worker Assistance: A New Approach Using Projetion-Based AR and a Novel Hand-Tracking Algorithm.” European Conference on Ambient Intelligence, vol. 10217, Springer, 2017, pp. 33–45, doi:10.1007/978-3-319-56997-0_3.","ufg":"Büttner, Sebastian et. al. (2017): Exploring Design Opportunities for Intelligent Worker Assistance: A New Approach Using Projetion-Based AR and a Novel Hand-Tracking Algorithm, in: European Conference on Ambient Intelligence (= Lecture Notes in Computer Science 10217), Cham, S. 33–45.","short":"S. Büttner, O. Sand, C. Röcker, in: European Conference on Ambient Intelligence, Springer, Cham, 2017, pp. 33–45.","chicago-de":"Büttner, Sebastian, Oliver Sand und Carsten Röcker. 2017. Exploring Design Opportunities for Intelligent Worker Assistance: A New Approach Using Projetion-Based AR and a Novel Hand-Tracking Algorithm. In: European Conference on Ambient Intelligence, 10217:33–45. Lecture Notes in Computer Science . Cham: Springer. doi:10.1007/978-3-319-56997-0_3, .","din1505-2-1":"Büttner, Sebastian ; Sand, Oliver ; Röcker, Carsten: Exploring Design Opportunities for Intelligent Worker Assistance: A New Approach Using Projetion-Based AR and a Novel Hand-Tracking Algorithm. In: European Conference on Ambient Intelligence, Lecture Notes in Computer Science . Bd. 10217. Cham : Springer, 2017, S. 33–45","ieee":"S. Büttner, O. Sand, and C. Röcker, “Exploring Design Opportunities for Intelligent Worker Assistance: A New Approach Using Projetion-Based AR and a Novel Hand-Tracking Algorithm,” in European Conference on Ambient Intelligence, Malaga, Spain, 2017, vol. 10217, pp. 33–45.","ama":"Büttner S, Sand O, Röcker C. Exploring Design Opportunities for Intelligent Worker Assistance: A New Approach Using Projetion-Based AR and a Novel Hand-Tracking Algorithm. In: European Conference on Ambient Intelligence. Vol 10217. Lecture Notes in Computer Science . Cham: Springer; 2017:33-45. doi:10.1007/978-3-319-56997-0_3"},"volume":10217,"author":[{"first_name":"Sebastian","last_name":"Büttner","full_name":"Büttner, Sebastian","id":"61868"},{"full_name":"Sand, Oliver","first_name":"Oliver","last_name":"Sand"},{"full_name":"Röcker, Carsten","first_name":"Carsten","last_name":"Röcker","id":"61525"}],"year":2017,"page":"33-45","status":"public"},{"type":"conference","date_created":"2020-12-14T09:33:05Z","publication_identifier":{"isbn":["9781509044795"]},"publication":"2017 IEEE Second International Conference on DC Microgrids (ICDCM)","date_updated":"2023-03-15T13:49:51Z","user_id":"74004","doi":"10.1109/icdcm.2017.8001049","_id":"4272","language":[{"iso":"eng"}],"title":"Concepts for a DC network in industrial production","publication_status":"published","citation":{"ieee":"H. Borcherding, J. Austermann, T. Kuhlmann, B. Weis, and A. Leonide, “Concepts for a DC network in industrial production,” in 2017 IEEE Second International Conference on DC Microgrids (ICDCM), Nuremburg, Germany, 2017.","ama":"Borcherding H, Austermann J, Kuhlmann T, Weis B, Leonide A. Concepts for a DC network in industrial production. In: 2017 IEEE Second International Conference on DC Microgrids (ICDCM). ; 2017. doi:10.1109/icdcm.2017.8001049","chicago":"Borcherding, Holger, Johann Austermann, Timm Kuhlmann, Benno Weis, and Andre Leonide. “Concepts for a DC Network in Industrial Production.” In 2017 IEEE Second International Conference on DC Microgrids (ICDCM), 2017. https://doi.org/10.1109/icdcm.2017.8001049.","apa":"Borcherding, H., Austermann, J., Kuhlmann, T., Weis, B., & Leonide, A. (2017). Concepts for a DC network in industrial production. In 2017 IEEE Second International Conference on DC Microgrids (ICDCM). Nuremburg, Germany. https://doi.org/10.1109/icdcm.2017.8001049","ufg":"Borcherding, Holger et. al. (2017): Concepts for a DC network in industrial production, in: 2017 IEEE Second International Conference on DC Microgrids (ICDCM).","bjps":"Borcherding H et al. (2017) Concepts for a DC Network in Industrial Production. 2017 IEEE Second International Conference on DC Microgrids (ICDCM).","mla":"Borcherding, Holger, et al. “Concepts for a DC Network in Industrial Production.” 2017 IEEE Second International Conference on DC Microgrids (ICDCM), 2017, doi:10.1109/icdcm.2017.8001049.","havard":"H. Borcherding, J. Austermann, T. Kuhlmann, B. Weis, A. Leonide, Concepts for a DC network in industrial production, in: 2017 IEEE Second International Conference on DC Microgrids (ICDCM), 2017.","van":"Borcherding H, Austermann J, Kuhlmann T, Weis B, Leonide A. Concepts for a DC network in industrial production. In: 2017 IEEE Second International Conference on DC Microgrids (ICDCM). 2017.","chicago-de":"Borcherding, Holger, Johann Austermann, Timm Kuhlmann, Benno Weis und Andre Leonide. 2017. Concepts for a DC network in industrial production. In: 2017 IEEE Second International Conference on DC Microgrids (ICDCM). doi:10.1109/icdcm.2017.8001049, .","din1505-2-1":"Borcherding, Holger ; Austermann, Johann ; Kuhlmann, Timm ; Weis, Benno ; Leonide, Andre: Concepts for a DC network in industrial production. In: 2017 IEEE Second International Conference on DC Microgrids (ICDCM), 2017","short":"H. Borcherding, J. Austermann, T. Kuhlmann, B. Weis, A. Leonide, in: 2017 IEEE Second International Conference on DC Microgrids (ICDCM), 2017."},"abstract":[{"text":"In this paper, concepts for an extended DC network for the main power supply of components from various manufacturers in industrial production are presented. In the first part, detailed requirements for such a network are given from the viewpoint of a customer. Based on those, different concepts for AC/DC conversion and energy management are discussed. As far as AC/DC conversion is concerned, the advantages and drawbacks of several rectifier topologies are listed, as they have a significant impact on the system behavior and EMC properties. An intelligent energy management can improve the energy efficiency and reduce downtimes of a plant, which are major requirements from a customer's viewpoint.","lang":"eng"}],"conference":{"name":"IEEE Second International Conference on DC Microgrids (ICDCM)","location":"Nuremburg, Germany","end_date":"2017-06-29","start_date":"2017-06-27"},"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"author":[{"first_name":"Holger","full_name":"Borcherding, Holger","id":"1693","last_name":"Borcherding"},{"last_name":"Austermann","first_name":"Johann","id":"42114","full_name":"Austermann, Johann"},{"full_name":"Kuhlmann, Timm","last_name":"Kuhlmann","first_name":"Timm"},{"last_name":"Weis","full_name":"Weis, Benno","first_name":"Benno"},{"first_name":"Andre","full_name":"Leonide, Andre","last_name":"Leonide"}],"year":2017,"status":"public"},{"series_title":"Technologien für die intelligente Automation ","publication_status":"published","department":[{"_id":"DEP5023"}],"conference":{"end_date":"2026-12-01","start_date":"2016-11-30","location":"Lemgo","name":"7. Jahreskolloquiums \"Kommunikation in der Automation\" (KommA 2016) / 5. Jahreskolloquiums \"Bildverarbeitung in der Automation\" (BVAu 2016)"},"abstract":[{"lang":"ger","text":"In diesem Tagungsband sind die besten Beiträge des 7. Jahreskolloquiums \"Kommunikation in der Automation\" (KommA 2016) und des 5. Jahreskolloquiums \"Bildverarbeitung in der Automation\" (BVAu 2016) enthalten. Die Kolloquien fanden am 30. November und 1. Dezember 2016 anlässlich des 10jährigen Jubiläums des inIT - Institut für industrielle Informationstechnik in der SmartFactoryOWL, einer herstellerunabhängigen und offenen Industrie 4.0 Forschungs- und Demonstrationsplattform und zugleich Testfeld für den Mittelstand, in Lemgo statt.\r\nDie vorgestellten neuesten Forschungsergebnisse auf den Gebieten der industriellen Kommunikationstechnik und Bildverarbeitung erweitern den aktuellen Stand der Forschung und Technik. Die in den Beiträgen enthaltenen anschauliche Anwendungsbeispiele aus dem Bereich der Automation setzen die Ergebnisse in den direkten Anwendungsbezug."}],"publisher":"Springer Vieweg","type":"book_editor","user_id":"83781","intvolume":" 7","place":"Berlin","doi":"10.1007/978-3-662-55232-2","_id":"4506","title":" Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik","volume":7,"citation":{"ieee":"J. Jasperneite and V. Lohweg, Eds., Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik, vol. 7. Berlin: Springer Vieweg, 2017. doi: 10.1007/978-3-662-55232-2.","apa":"Jasperneite, J., & Lohweg, V. (Eds.). (2017). Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik (Vol. 7). Springer Vieweg. https://doi.org/10.1007/978-3-662-55232-2","chicago":"Jasperneite, Jürgen, and Volker Lohweg, eds. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik. Vol. 7. Technologien für die intelligente Automation . Berlin: Springer Vieweg, 2017. https://doi.org/10.1007/978-3-662-55232-2.","ama":"Jasperneite J, Lohweg V, eds. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik. Vol 7. Springer Vieweg; 2017. doi:10.1007/978-3-662-55232-2","van":"Jasperneite J, Lohweg V, editors. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik. Berlin: Springer Vieweg; 2017. 295 p. (Technologien für die intelligente Automation ; vol. 7).","mla":"Jasperneite, Jürgen, and Volker Lohweg, editors. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik. Springer Vieweg, 2017, https://doi.org/10.1007/978-3-662-55232-2.","havard":"J. Jasperneite, V. Lohweg, eds., Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik, Springer Vieweg, Berlin, 2017.","bjps":"Jasperneite J and Lohweg V (eds) (2017) Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik. Berlin: Springer Vieweg.","ufg":"Jasperneite, Jürgen/Lohweg, Volker: Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik, Bd. 7, Berlin 2017 (Technologien für die intelligente Automation ).","short":"J. Jasperneite, V. Lohweg, eds., Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik, Springer Vieweg, Berlin, 2017.","chicago-de":"Jasperneite, Jürgen und Volker Lohweg, Hrsg. 2017. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik. Bd. 7. Technologien für die intelligente Automation . Berlin: Springer Vieweg. doi:10.1007/978-3-662-55232-2, .","din1505-2-1":"Jasperneite, J. ; Lohweg, V. (Hrsg.): Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik, Technologien für die intelligente Automation . Bd. 7. Berlin : Springer Vieweg, 2017"},"year":"2017","page":"295","status":"public","date_created":"2021-01-22T08:40:04Z","publication_identifier":{"eisbn":["978-3-662-55232-2 "],"isbn":["978-3-662-55231-5"]},"date_updated":"2025-05-12T08:19:51Z","editor":[{"id":"1899","first_name":"Jürgen","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite"},{"last_name":"Lohweg","first_name":"Volker","id":"1804","full_name":"Lohweg, Volker","orcid":"0000-0002-3325-7887"}],"language":[{"iso":"ger"}],"keyword":["Industrielle Kommunikationstechnik","Industrielle Bildverarbeitung","network reliability and redundancy methods","Networked Controls Systems","wireless real-time communication","quality control","reliability","safety and risk"]},{"author":[{"first_name":"Lars","full_name":"Dürkop, Lars","last_name":"Dürkop"},{"first_name":"Jürgen","full_name":"Jasperneite, Jürgen","id":"1899","last_name":"Jasperneite"}],"year":2017,"department":[{"_id":"DEP5023"}],"publisher":"Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) ","status":"public","page":"59-71","title":"„Plug Produce“ als Anwendungsfall von Industrie 4.0","citation":{"van":"Dürkop L, Jasperneite J. „Plug Produce“ als Anwendungsfall von Industrie 4.0. In: Handbuch Industrie 40 Bd2. Springer-Verlag: Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) ; 2017. p. 59–71.","ama":"Dürkop L, Jasperneite J. „Plug Produce“ als Anwendungsfall von Industrie 4.0. In: Handbuch Industrie 4.0 Bd.2. Springer-Verlag: Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) ; 2017:59-71.","ufg":"Dürkop, Lars/Jasperneite, Jürgen (2017): „Plug Produce“ als Anwendungsfall von Industrie 4.0, in: Handbuch Industrie 4.0 Bd.2, Springer-Verlag, S. 59–71.","bjps":"Dürkop L and Jasperneite J (2017) „Plug Produce“ Als Anwendungsfall von Industrie 4.0. Handbuch Industrie 4.0 Bd.2. Springer-Verlag: Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) , pp. 59–71.","havard":"L. Dürkop, J. Jasperneite, „Plug Produce“ als Anwendungsfall von Industrie 4.0, in: Handbuch Industrie 4.0 Bd.2, Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) , Springer-Verlag, 2017: pp. 59–71.","mla":"Dürkop, Lars, and Jürgen Jasperneite. “„Plug Produce“ Als Anwendungsfall von Industrie 4.0.” Handbuch Industrie 4.0 Bd.2, Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) , 2017, pp. 59–71.","apa":"Dürkop, L., & Jasperneite, J. (2017). „Plug Produce“ als Anwendungsfall von Industrie 4.0. In Handbuch Industrie 4.0 Bd.2 (pp. 59–71). Springer-Verlag: Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) .","ieee":"L. Dürkop and J. Jasperneite, “„Plug Produce“ als Anwendungsfall von Industrie 4.0,” in Handbuch Industrie 4.0 Bd.2, 2017, pp. 59–71.","chicago":"Dürkop, Lars, and Jürgen Jasperneite. “„Plug Produce“ Als Anwendungsfall von Industrie 4.0.” In Handbuch Industrie 4.0 Bd.2, 59–71. Springer-Verlag: Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) , 2017.","short":"L. Dürkop, J. Jasperneite, in: Handbuch Industrie 4.0 Bd.2, Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) , Springer-Verlag, 2017, pp. 59–71.","chicago-de":"Dürkop, Lars und Jürgen Jasperneite. 2017. „Plug Produce“ als Anwendungsfall von Industrie 4.0. In: Handbuch Industrie 4.0 Bd.2, 59–71. Springer-Verlag: Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) .","din1505-2-1":"Dürkop, Lars ; Jasperneite, Jürgen: „Plug Produce“ als Anwendungsfall von Industrie 4.0. In: Handbuch Industrie 4.0 Bd.2. Springer-Verlag : Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) , 2017, S. 59–71"},"_id":"4507","place":"Springer-Verlag","language":[{"iso":"eng"}],"publication":"Handbuch Industrie 4.0 Bd.2","date_created":"2021-01-22T08:41:41Z","type":"conference","user_id":"74222","date_updated":"2023-03-15T13:49:53Z"},{"_id":"4579","place":"Springer-Verlag","language":[{"iso":"eng"}],"publication":"Handbuch Industrie 4.0 Bd.2","date_created":"2021-01-28T09:16:19Z","type":"conference","user_id":"74222","date_updated":"2023-03-15T13:49:54Z","author":[{"full_name":"Dürkop, Lars","last_name":"Dürkop","first_name":"Lars"},{"last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"}],"year":2017,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"publisher":"Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) ","status":"public","page":"59-71","title":"„Plug Produce“ als Anwendungsfall von Industrie 4.0","citation":{"short":"L. Dürkop, J. Jasperneite, in: Handbuch Industrie 4.0 Bd.2, Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) , Springer-Verlag, 2017, pp. 59–71.","din1505-2-1":"Dürkop, Lars ; Jasperneite, Jürgen: „Plug Produce“ als Anwendungsfall von Industrie 4.0. In: Handbuch Industrie 4.0 Bd.2. Springer-Verlag : Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) , 2017, S. 59–71","chicago-de":"Dürkop, Lars und Jürgen Jasperneite. 2017. „Plug Produce“ als Anwendungsfall von Industrie 4.0. In: Handbuch Industrie 4.0 Bd.2, 59–71. Springer-Verlag: Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) .","apa":"Dürkop, L., & Jasperneite, J. (2017). „Plug Produce“ als Anwendungsfall von Industrie 4.0. In Handbuch Industrie 4.0 Bd.2 (pp. 59–71). Springer-Verlag: Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) .","chicago":"Dürkop, Lars, and Jürgen Jasperneite. “„Plug Produce“ Als Anwendungsfall von Industrie 4.0.” In Handbuch Industrie 4.0 Bd.2, 59–71. Springer-Verlag: Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) , 2017.","van":"Dürkop L, Jasperneite J. „Plug Produce“ als Anwendungsfall von Industrie 4.0. In: Handbuch Industrie 40 Bd2. Springer-Verlag: Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) ; 2017. p. 59–71.","havard":"L. Dürkop, J. Jasperneite, „Plug Produce“ als Anwendungsfall von Industrie 4.0, in: Handbuch Industrie 4.0 Bd.2, Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) , Springer-Verlag, 2017: pp. 59–71.","mla":"Dürkop, Lars, and Jürgen Jasperneite. “„Plug Produce“ Als Anwendungsfall von Industrie 4.0.” Handbuch Industrie 4.0 Bd.2, Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) , 2017, pp. 59–71.","bjps":"Dürkop L and Jasperneite J (2017) „Plug Produce“ Als Anwendungsfall von Industrie 4.0. Handbuch Industrie 4.0 Bd.2. Springer-Verlag: Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) , pp. 59–71.","ufg":"Dürkop, Lars/Jasperneite, Jürgen (2017): „Plug Produce“ als Anwendungsfall von Industrie 4.0, in: Handbuch Industrie 4.0 Bd.2, Springer-Verlag, S. 59–71.","ieee":"L. Dürkop and J. Jasperneite, “„Plug Produce“ als Anwendungsfall von Industrie 4.0,” in Handbuch Industrie 4.0 Bd.2, 2017, pp. 59–71.","ama":"Dürkop L, Jasperneite J. „Plug Produce“ als Anwendungsfall von Industrie 4.0. In: Handbuch Industrie 4.0 Bd.2. Springer-Verlag: Vogel-Heuser, Birgit; Bauernhansl, Thomas; ten Hompel, Michael (Hrsg.) ; 2017:59-71."}},{"citation":{"short":"M. Ehrlich, A. Biendarra, H. Trsek, E. Wojtkowiak, J. Jasperneite, in: Kommunikation in Der Automation - KommA 2017, Magdeburg; Germany, 2017.","chicago-de":"Ehrlich, Marco, Alexander Biendarra, Henning Trsek, Emanuel Wojtkowiak und Jürgen Jasperneite. 2017. Passive Flow Monitoring of Hybrid Network Connections regarding Quality of Service Parameters for the Industrial Automation. In: Kommunikation in der Automation - KommA 2017. Magdeburg; Germany.","din1505-2-1":"Ehrlich, Marco ; Biendarra, Alexander ; Trsek, Henning ; Wojtkowiak, Emanuel ; Jasperneite, Jürgen: Passive Flow Monitoring of Hybrid Network Connections regarding Quality of Service Parameters for the Industrial Automation. In: Kommunikation in der Automation - KommA 2017. Magdeburg; Germany, 2017","ieee":"M. Ehrlich, A. Biendarra, H. Trsek, E. Wojtkowiak, and J. Jasperneite, “Passive Flow Monitoring of Hybrid Network Connections regarding Quality of Service Parameters for the Industrial Automation,” in Kommunikation in der Automation - KommA 2017, 2017.","apa":"Ehrlich, M., Biendarra, A., Trsek, H., Wojtkowiak, E., & Jasperneite, J. (2017). Passive Flow Monitoring of Hybrid Network Connections regarding Quality of Service Parameters for the Industrial Automation. In Kommunikation in der Automation - KommA 2017. Magdeburg; Germany.","chicago":"Ehrlich, Marco, Alexander Biendarra, Henning Trsek, Emanuel Wojtkowiak, and Jürgen Jasperneite. “Passive Flow Monitoring of Hybrid Network Connections Regarding Quality of Service Parameters for the Industrial Automation.” In Kommunikation in Der Automation - KommA 2017. Magdeburg; Germany, 2017.","ama":"Ehrlich M, Biendarra A, Trsek H, Wojtkowiak E, Jasperneite J. Passive Flow Monitoring of Hybrid Network Connections regarding Quality of Service Parameters for the Industrial Automation. In: Kommunikation in Der Automation - KommA 2017. Magdeburg; Germany; 2017.","van":"Ehrlich M, Biendarra A, Trsek H, Wojtkowiak E, Jasperneite J. Passive Flow Monitoring of Hybrid Network Connections regarding Quality of Service Parameters for the Industrial Automation. In: Kommunikation in der Automation - KommA 2017. Magdeburg; Germany; 2017.","havard":"M. Ehrlich, A. Biendarra, H. Trsek, E. Wojtkowiak, J. Jasperneite, Passive Flow Monitoring of Hybrid Network Connections regarding Quality of Service Parameters for the Industrial Automation, in: Kommunikation in Der Automation - KommA 2017, Magdeburg; Germany, 2017.","mla":"Ehrlich, Marco, et al. “Passive Flow Monitoring of Hybrid Network Connections Regarding Quality of Service Parameters for the Industrial Automation.” Kommunikation in Der Automation - KommA 2017, 2017.","bjps":"Ehrlich M et al. (2017) Passive Flow Monitoring of Hybrid Network Connections Regarding Quality of Service Parameters for the Industrial Automation. Kommunikation in Der Automation - KommA 2017. Magdeburg; Germany.","ufg":"Ehrlich, Marco et. al. (2017): Passive Flow Monitoring of Hybrid Network Connections regarding Quality of Service Parameters for the Industrial Automation, in: Kommunikation in der Automation - KommA 2017, Magdeburg; Germany."},"title":"Passive Flow Monitoring of Hybrid Network Connections regarding Quality of Service Parameters for the Industrial Automation","status":"public","year":2017,"author":[{"id":"61562","last_name":"Ehrlich","full_name":"Ehrlich, Marco","first_name":"Marco"},{"full_name":"Biendarra, Alexander","first_name":"Alexander","last_name":"Biendarra"},{"last_name":"Trsek","first_name":"Henning","full_name":"Trsek, Henning","id":"1486"},{"full_name":"Wojtkowiak, Emanuel","last_name":"Wojtkowiak","first_name":"Emanuel"},{"first_name":"Jürgen","id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"user_id":"74222","date_updated":"2023-03-15T13:49:54Z","publication":"Kommunikation in der Automation - KommA 2017","date_created":"2021-01-28T09:18:10Z","type":"conference","place":"Magdeburg; Germany","language":[{"iso":"eng"}],"_id":"4580"},{"citation":{"van":"Schriegel S, Pieper C, Gamper S, Biendarra A, Jasperneite J. Vereinfachtes Ethernet TSN-Implementierungsmodell für Feldgeräte mit zwei Ports. In: Kommunikation in der Automation - KommA 2017. Magdeburg, Germany; 2017.","ama":"Schriegel S, Pieper C, Gamper S, Biendarra A, Jasperneite J. Vereinfachtes Ethernet TSN-Implementierungsmodell für Feldgeräte mit zwei Ports. In: Kommunikation in Der Automation - KommA 2017. Magdeburg, Germany; 2017.","ufg":"Schriegel, Sebastian et. al. (2017): Vereinfachtes Ethernet TSN-Implementierungsmodell für Feldgeräte mit zwei Ports, in: Kommunikation in der Automation - KommA 2017, Magdeburg, Germany.","mla":"Schriegel, Sebastian, et al. “Vereinfachtes Ethernet TSN-Implementierungsmodell Für Feldgeräte Mit Zwei Ports.” Kommunikation in Der Automation - KommA 2017, 2017.","havard":"S. Schriegel, C. Pieper, S. Gamper, A. Biendarra, J. Jasperneite, Vereinfachtes Ethernet TSN-Implementierungsmodell für Feldgeräte mit zwei Ports, in: Kommunikation in Der Automation - KommA 2017, Magdeburg, Germany, 2017.","bjps":"Schriegel S et al. (2017) Vereinfachtes Ethernet TSN-Implementierungsmodell Für Feldgeräte Mit Zwei Ports. Kommunikation in Der Automation - KommA 2017. Magdeburg, Germany.","apa":"Schriegel, S., Pieper, C., Gamper, S., Biendarra, A., & Jasperneite, J. (2017). Vereinfachtes Ethernet TSN-Implementierungsmodell für Feldgeräte mit zwei Ports. In Kommunikation in der Automation - KommA 2017. Magdeburg, Germany.","ieee":"S. Schriegel, C. Pieper, S. Gamper, A. Biendarra, and J. Jasperneite, “Vereinfachtes Ethernet TSN-Implementierungsmodell für Feldgeräte mit zwei Ports,” in Kommunikation in der Automation - KommA 2017, 2017.","chicago":"Schriegel, Sebastian, Carsten Pieper, Sergej Gamper, Alexander Biendarra, and Jürgen Jasperneite. “Vereinfachtes Ethernet TSN-Implementierungsmodell Für Feldgeräte Mit Zwei Ports.” In Kommunikation in Der Automation - KommA 2017. Magdeburg, Germany, 2017.","short":"S. Schriegel, C. Pieper, S. Gamper, A. Biendarra, J. Jasperneite, in: Kommunikation in Der Automation - KommA 2017, Magdeburg, Germany, 2017.","chicago-de":"Schriegel, Sebastian, Carsten Pieper, Sergej Gamper, Alexander Biendarra und Jürgen Jasperneite. 2017. Vereinfachtes Ethernet TSN-Implementierungsmodell für Feldgeräte mit zwei Ports. In: Kommunikation in der Automation - KommA 2017. Magdeburg, Germany.","din1505-2-1":"Schriegel, Sebastian ; Pieper, Carsten ; Gamper, Sergej ; Biendarra, Alexander ; Jasperneite, Jürgen: Vereinfachtes Ethernet TSN-Implementierungsmodell für Feldgeräte mit zwei Ports. In: Kommunikation in der Automation - KommA 2017. Magdeburg, Germany, 2017"},"title":"Vereinfachtes Ethernet TSN-Implementierungsmodell für Feldgeräte mit zwei Ports","status":"public","author":[{"full_name":"Schriegel, Sebastian","first_name":"Sebastian","last_name":"Schriegel"},{"first_name":"Carsten","last_name":"Pieper","full_name":"Pieper, Carsten","id":"2006"},{"first_name":"Sergej","full_name":"Gamper, Sergej","last_name":"Gamper"},{"last_name":"Biendarra","full_name":"Biendarra, Alexander","first_name":"Alexander"},{"id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"}],"year":2017,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"user_id":"74222","date_updated":"2023-03-15T13:49:54Z","publication":"Kommunikation in der Automation - KommA 2017","date_created":"2021-01-28T09:19:56Z","type":"conference","_id":"4581","place":"Magdeburg, Germany","language":[{"iso":"eng"}]},{"place":"Magdebur, Germany","language":[{"iso":"eng"}],"_id":"4582","user_id":"74222","date_updated":"2023-03-15T13:49:54Z","publication":"Kommunikation in der Automation - KommA 2017","date_created":"2021-01-28T09:21:20Z","type":"conference","status":"public","year":2017,"author":[{"full_name":"Mytych, Martin Jan","first_name":"Martin Jan","last_name":"Mytych"},{"first_name":"Lukasz","id":"1710","last_name":"Wisniewski","full_name":"Wisniewski, Lukasz"},{"full_name":"Jasperneite, Jürgen","first_name":"Jürgen","last_name":"Jasperneite","id":"1899"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"citation":{"ama":"Mytych MJ, Wisniewski L, Jasperneite J. Potential of SDN/NFV Network Management Concepts with Regards to Industrial Automation. In: Kommunikation in Der Automation - KommA 2017. Magdebur, Germany; 2017.","ieee":"M. J. Mytych, L. Wisniewski, and J. Jasperneite, “Potential of SDN/NFV Network Management Concepts with Regards to Industrial Automation,” in Kommunikation in der Automation - KommA 2017, 2017.","din1505-2-1":"Mytych, Martin Jan ; Wisniewski, Lukasz ; Jasperneite, Jürgen: Potential of SDN/NFV Network Management Concepts with Regards to Industrial Automation. In: Kommunikation in der Automation - KommA 2017. Magdebur, Germany, 2017","chicago-de":"Mytych, Martin Jan, Lukasz Wisniewski und Jürgen Jasperneite. 2017. Potential of SDN/NFV Network Management Concepts with Regards to Industrial Automation. In: Kommunikation in der Automation - KommA 2017. Magdebur, Germany.","short":"M.J. Mytych, L. Wisniewski, J. Jasperneite, in: Kommunikation in Der Automation - KommA 2017, Magdebur, Germany, 2017.","ufg":"Mytych, Martin Jan et. al. (2017): Potential of SDN/NFV Network Management Concepts with Regards to Industrial Automation, in: Kommunikation in der Automation - KommA 2017, Magdebur, Germany.","havard":"M.J. Mytych, L. Wisniewski, J. Jasperneite, Potential of SDN/NFV Network Management Concepts with Regards to Industrial Automation, in: Kommunikation in Der Automation - KommA 2017, Magdebur, Germany, 2017.","mla":"Mytych, Martin Jan, et al. “Potential of SDN/NFV Network Management Concepts with Regards to Industrial Automation.” Kommunikation in Der Automation - KommA 2017, 2017.","bjps":"Mytych MJ, Wisniewski L and Jasperneite J (2017) Potential of SDN/NFV Network Management Concepts with Regards to Industrial Automation. Kommunikation in Der Automation - KommA 2017. Magdebur, Germany.","van":"Mytych MJ, Wisniewski L, Jasperneite J. Potential of SDN/NFV Network Management Concepts with Regards to Industrial Automation. In: Kommunikation in der Automation - KommA 2017. Magdebur, Germany; 2017.","chicago":"Mytych, Martin Jan, Lukasz Wisniewski, and Jürgen Jasperneite. “Potential of SDN/NFV Network Management Concepts with Regards to Industrial Automation.” In Kommunikation in Der Automation - KommA 2017. Magdebur, Germany, 2017.","apa":"Mytych, M. J., Wisniewski, L., & Jasperneite, J. (2017). Potential of SDN/NFV Network Management Concepts with Regards to Industrial Automation. In Kommunikation in der Automation - KommA 2017. Magdebur, Germany."},"title":"Potential of SDN/NFV Network Management Concepts with Regards to Industrial Automation"},{"publication":"Kommunikation in der Automation - KommA 2017","type":"journal_article","date_created":"2021-01-28T09:22:49Z","user_id":"74222","date_updated":"2023-03-15T13:49:54Z","language":[{"iso":"eng"}],"_id":"4583","title":"LoRaWAN-basierte IoT-Infrastruktur","citation":{"ama":"Pieper C, Kobzan T, Schriegel S, Jasperneite J. LoRaWAN-basierte IoT-Infrastruktur. Kommunikation in der Automation - KommA 2017. 2017.","ieee":"C. Pieper, T. Kobzan, S. Schriegel, and J. Jasperneite, “LoRaWAN-basierte IoT-Infrastruktur,” Kommunikation in der Automation - KommA 2017, 2017.","ufg":"Pieper, Carsten et. al. (2017): LoRaWAN-basierte IoT-Infrastruktur, in: Kommunikation in der Automation - KommA 2017.","havard":"C. Pieper, T. Kobzan, S. Schriegel, J. Jasperneite, LoRaWAN-basierte IoT-Infrastruktur, Kommunikation in Der Automation - KommA 2017. (2017).","mla":"Pieper, Carsten, et al. “LoRaWAN-Basierte IoT-Infrastruktur.” Kommunikation in Der Automation - KommA 2017, 2017.","bjps":"Pieper C et al. (2017) LoRaWAN-Basierte IoT-Infrastruktur. Kommunikation in der Automation - KommA 2017.","van":"Pieper C, Kobzan T, Schriegel S, Jasperneite J. LoRaWAN-basierte IoT-Infrastruktur. Kommunikation in der Automation - KommA 2017. 2017;","chicago":"Pieper, Carsten, Thomas Kobzan, Sebastian Schriegel, and Jürgen Jasperneite. “LoRaWAN-Basierte IoT-Infrastruktur.” Kommunikation in Der Automation - KommA 2017, 2017.","apa":"Pieper, C., Kobzan, T., Schriegel, S., & Jasperneite, J. (2017). LoRaWAN-basierte IoT-Infrastruktur. Kommunikation in Der Automation - KommA 2017.","din1505-2-1":"Pieper, Carsten ; Kobzan, Thomas ; Schriegel, Sebastian ; Jasperneite, Jürgen: LoRaWAN-basierte IoT-Infrastruktur. In: Kommunikation in der Automation - KommA 2017 (2017)","chicago-de":"Pieper, Carsten, Thomas Kobzan, Sebastian Schriegel und Jürgen Jasperneite. 2017. LoRaWAN-basierte IoT-Infrastruktur. Kommunikation in der Automation - KommA 2017.","short":"C. Pieper, T. Kobzan, S. Schriegel, J. Jasperneite, Kommunikation in Der Automation - KommA 2017 (2017)."},"author":[{"full_name":"Pieper, Carsten","first_name":"Carsten","id":"2006","last_name":"Pieper"},{"first_name":"Thomas","last_name":"Kobzan","full_name":"Kobzan, Thomas"},{"full_name":"Schriegel, Sebastian","last_name":"Schriegel","first_name":"Sebastian"},{"first_name":"Jürgen","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","id":"1899"}],"year":2017,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public"},{"status":"public","author":[{"full_name":"Schumacher, Markus","first_name":"Markus","last_name":"Schumacher"},{"full_name":"Wisniewski, Lukasz","first_name":"Lukasz","last_name":"Wisniewski","id":"1710"},{"last_name":"Schriegel","first_name":"Sebastian","full_name":"Schriegel, Sebastian"},{"last_name":"Jasperneite","first_name":"Jürgen","id":"1899","full_name":"Jasperneite, Jürgen"}],"year":2017,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"citation":{"chicago-de":"Schumacher, Markus, Lukasz Wisniewski, Sebastian Schriegel und Jürgen Jasperneite. 2017. Anforderung an Hard- und Software-Co-Design zur Realisierung minimaler Zykluszeiten. Kommunikation in der Automation - KommA 2015.","din1505-2-1":"Schumacher, Markus ; Wisniewski, Lukasz ; Schriegel, Sebastian ; Jasperneite, Jürgen: Anforderung an Hard- und Software-Co-Design zur Realisierung minimaler Zykluszeiten. In: Kommunikation in der Automation - KommA 2015 (2017)","short":"M. Schumacher, L. Wisniewski, S. Schriegel, J. Jasperneite, Kommunikation in Der Automation - KommA 2015 (2017).","ufg":"Schumacher, Markus et. al. (2017): Anforderung an Hard- und Software-Co-Design zur Realisierung minimaler Zykluszeiten, in: Kommunikation in der Automation - KommA 2015.","bjps":"Schumacher M et al. (2017) Anforderung an Hard- Und Software-Co-Design Zur Realisierung Minimaler Zykluszeiten. Kommunikation in der Automation - KommA 2015.","mla":"Schumacher, Markus, et al. “Anforderung an Hard- Und Software-Co-Design Zur Realisierung Minimaler Zykluszeiten.” Kommunikation in Der Automation - KommA 2015, 2017.","havard":"M. Schumacher, L. Wisniewski, S. Schriegel, J. Jasperneite, Anforderung an Hard- und Software-Co-Design zur Realisierung minimaler Zykluszeiten, Kommunikation in Der Automation - KommA 2015. (2017).","van":"Schumacher M, Wisniewski L, Schriegel S, Jasperneite J. Anforderung an Hard- und Software-Co-Design zur Realisierung minimaler Zykluszeiten. Kommunikation in der Automation - KommA 2015. 2017;","chicago":"Schumacher, Markus, Lukasz Wisniewski, Sebastian Schriegel, and Jürgen Jasperneite. “Anforderung an Hard- Und Software-Co-Design Zur Realisierung Minimaler Zykluszeiten.” Kommunikation in Der Automation - KommA 2015, 2017.","apa":"Schumacher, M., Wisniewski, L., Schriegel, S., & Jasperneite, J. (2017). Anforderung an Hard- und Software-Co-Design zur Realisierung minimaler Zykluszeiten. Kommunikation in Der Automation - KommA 2015.","ama":"Schumacher M, Wisniewski L, Schriegel S, Jasperneite J. Anforderung an Hard- und Software-Co-Design zur Realisierung minimaler Zykluszeiten. Kommunikation in der Automation - KommA 2015. 2017.","ieee":"M. Schumacher, L. Wisniewski, S. Schriegel, and J. Jasperneite, “Anforderung an Hard- und Software-Co-Design zur Realisierung minimaler Zykluszeiten,” Kommunikation in der Automation - KommA 2015, 2017."},"title":"Anforderung an Hard- und Software-Co-Design zur Realisierung minimaler Zykluszeiten","_id":"4584","language":[{"iso":"eng"}],"user_id":"74222","date_updated":"2023-03-15T13:49:54Z","publication":"Kommunikation in der Automation - KommA 2015","date_created":"2021-01-28T09:24:01Z","type":"journal_article"},{"date_updated":"2023-03-15T13:49:54Z","user_id":"74222","date_created":"2021-01-28T09:31:18Z","type":"conference","publication":"Vortrag im Rahmen der OWL-Gespräche der Friedrich-Ebert-Stiftung ","_id":"4585","language":[{"iso":"eng"}],"place":"Lemgo","citation":{"ama":"Jasperneite J. Wie verändert Industrie 4.0 Arbeit und Alltag? . In: Vortrag Im Rahmen Der OWL-Gespräche Der Friedrich-Ebert-Stiftung . Lemgo; 2017.","ieee":"J. Jasperneite, “Wie verändert Industrie 4.0 Arbeit und Alltag? ,” in Vortrag im Rahmen der OWL-Gespräche der Friedrich-Ebert-Stiftung , 2017.","short":"J. Jasperneite, in: Vortrag Im Rahmen Der OWL-Gespräche Der Friedrich-Ebert-Stiftung , Lemgo, 2017.","din1505-2-1":"Jasperneite, Jürgen: Wie verändert Industrie 4.0 Arbeit und Alltag? . In: Vortrag im Rahmen der OWL-Gespräche der Friedrich-Ebert-Stiftung . Lemgo, 2017","chicago-de":"Jasperneite, Jürgen. 2017. Wie verändert Industrie 4.0 Arbeit und Alltag? . In: Vortrag im Rahmen der OWL-Gespräche der Friedrich-Ebert-Stiftung . Lemgo.","van":"Jasperneite J. Wie verändert Industrie 4.0 Arbeit und Alltag? . In: Vortrag im Rahmen der OWL-Gespräche der Friedrich-Ebert-Stiftung . Lemgo; 2017.","ufg":"Jasperneite, Jürgen (2017): Wie verändert Industrie 4.0 Arbeit und Alltag? , in: Vortrag im Rahmen der OWL-Gespräche der Friedrich-Ebert-Stiftung , Lemgo.","havard":"J. Jasperneite, Wie verändert Industrie 4.0 Arbeit und Alltag? , in: Vortrag Im Rahmen Der OWL-Gespräche Der Friedrich-Ebert-Stiftung , Lemgo, 2017.","bjps":"Jasperneite J (2017) Wie Verändert Industrie 4.0 Arbeit Und Alltag? . Vortrag Im Rahmen Der OWL-Gespräche Der Friedrich-Ebert-Stiftung . Lemgo.","mla":"Jasperneite, Jürgen. “Wie Verändert Industrie 4.0 Arbeit Und Alltag? .” Vortrag Im Rahmen Der OWL-Gespräche Der Friedrich-Ebert-Stiftung , 2017.","apa":"Jasperneite, J. (2017). Wie verändert Industrie 4.0 Arbeit und Alltag? . In Vortrag im Rahmen der OWL-Gespräche der Friedrich-Ebert-Stiftung . Lemgo.","chicago":"Jasperneite, Jürgen. “Wie Verändert Industrie 4.0 Arbeit Und Alltag? .” In Vortrag Im Rahmen Der OWL-Gespräche Der Friedrich-Ebert-Stiftung . Lemgo, 2017."},"title":"Wie verändert Industrie 4.0 Arbeit und Alltag? ","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2017,"author":[{"first_name":"Jürgen","last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen"}]},{"citation":{"ufg":"Jasperneite, Jürgen et. al. (2017): Industrial Wireless: Koexistenz und hybride Systeme, in: open automation, Ausgabe 5/2017, S. 50–53.","mla":"Jasperneite, Jürgen, et al. “Industrial Wireless: Koexistenz Und Hybride Systeme.” Open Automation, Ausgabe 5/2017, VDE Verlag, 2017, pp. 50–53.","bjps":"Jasperneite J et al. (2017) Industrial Wireless: Koexistenz Und Hybride Systeme. open automation, Ausgabe 5/2017 50–53.","havard":"J. Jasperneite, U. Meier, A. Neumann, N. Wiebusch, Industrial Wireless: Koexistenz und hybride Systeme, Open Automation, Ausgabe 5/2017. (2017) 50–53.","van":"Jasperneite J, Meier U, Neumann A, Wiebusch N. Industrial Wireless: Koexistenz und hybride Systeme. open automation, Ausgabe 5/2017. 2017;50–3.","chicago":"Jasperneite, Jürgen, Uwe Meier, Arne Neumann, and Nico Wiebusch. “Industrial Wireless: Koexistenz Und Hybride Systeme.” Open Automation, Ausgabe 5/2017, 2017, 50–53.","apa":"Jasperneite, J., Meier, U., Neumann, A., & Wiebusch, N. (2017). Industrial Wireless: Koexistenz und hybride Systeme. Open Automation, Ausgabe 5/2017, 50–53.","din1505-2-1":"Jasperneite, Jürgen ; Meier, Uwe ; Neumann, Arne ; Wiebusch, Nico: Industrial Wireless: Koexistenz und hybride Systeme. In: open automation, Ausgabe 5/2017. Berlin, VDE Verlag (2017), S. 50–53","chicago-de":"Jasperneite, Jürgen, Uwe Meier, Arne Neumann und Nico Wiebusch. 2017. Industrial Wireless: Koexistenz und hybride Systeme. open automation, Ausgabe 5/2017: 50–53.","short":"J. Jasperneite, U. Meier, A. Neumann, N. Wiebusch, Open Automation, Ausgabe 5/2017 (2017) 50–53.","ama":"Jasperneite J, Meier U, Neumann A, Wiebusch N. Industrial Wireless: Koexistenz und hybride Systeme. open automation, Ausgabe 5/2017. 2017:50-53.","ieee":"J. Jasperneite, U. Meier, A. Neumann, and N. Wiebusch, “Industrial Wireless: Koexistenz und hybride Systeme,” open automation, Ausgabe 5/2017, pp. 50–53, 2017."},"title":"Industrial Wireless: Koexistenz und hybride Systeme","status":"public","page":"50-53","publisher":"VDE Verlag","year":2017,"author":[{"full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","id":"1899","first_name":"Jürgen"},{"last_name":"Meier","full_name":"Meier, Uwe","id":"1143","first_name":"Uwe"},{"last_name":"Neumann","full_name":"Neumann, Arne","id":"61915","first_name":"Arne"},{"full_name":"Wiebusch, Nico","first_name":"Nico","last_name":"Wiebusch"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"user_id":"45673","date_updated":"2023-03-15T13:49:54Z","publication":"open automation, Ausgabe 5/2017","type":"scientific_journal_article","date_created":"2021-01-28T09:37:22Z","place":"Berlin","language":[{"iso":"eng"}],"_id":"4588"},{"language":[{"iso":"eng"}],"_id":"4589","publication":" Automation 2017, Baden-Baden","date_created":"2021-01-28T09:38:54Z","type":"journal_article","user_id":"74222","date_updated":"2023-03-15T13:49:54Z","author":[{"full_name":"Schriegel, Sebastian","last_name":"Schriegel","first_name":"Sebastian"},{"first_name":"Florian","full_name":"Pethig, Florian","last_name":"Pethig"},{"id":"58525","last_name":"Windmann","full_name":"Windmann, Stefan","first_name":"Stefan"},{"full_name":"Jasperneite, Jürgen","id":"1899","first_name":"Jürgen","last_name":"Jasperneite"}],"year":2017,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public","title":"PROFIanalytics - die Brücke zwischen PROFINET und Cloud-basierter Prozessdatenanalyse","citation":{"chicago":"Schriegel, Sebastian, Florian Pethig, Stefan Windmann, and Jürgen Jasperneite. “PROFIanalytics - Die Brücke Zwischen PROFINET Und Cloud-Basierter Prozessdatenanalyse.” Automation 2017, Baden-Baden, 2017.","ieee":"S. Schriegel, F. Pethig, S. Windmann, and J. Jasperneite, “PROFIanalytics - die Brücke zwischen PROFINET und Cloud-basierter Prozessdatenanalyse,” Automation 2017, Baden-Baden, 2017.","apa":"Schriegel, S., Pethig, F., Windmann, S., & Jasperneite, J. (2017). PROFIanalytics - die Brücke zwischen PROFINET und Cloud-basierter Prozessdatenanalyse. Automation 2017, Baden-Baden.","havard":"S. Schriegel, F. Pethig, S. Windmann, J. Jasperneite, PROFIanalytics - die Brücke zwischen PROFINET und Cloud-basierter Prozessdatenanalyse, Automation 2017, Baden-Baden. (2017).","mla":"Schriegel, Sebastian, et al. “PROFIanalytics - Die Brücke Zwischen PROFINET Und Cloud-Basierter Prozessdatenanalyse.” Automation 2017, Baden-Baden, 2017.","bjps":"Schriegel S et al. (2017) PROFIanalytics - Die Brücke Zwischen PROFINET Und Cloud-Basierter Prozessdatenanalyse. Automation 2017, Baden-Baden.","ufg":"Schriegel, Sebastian et. al. (2017): PROFIanalytics - die Brücke zwischen PROFINET und Cloud-basierter Prozessdatenanalyse, in: Automation 2017, Baden-Baden.","ama":"Schriegel S, Pethig F, Windmann S, Jasperneite J. PROFIanalytics - die Brücke zwischen PROFINET und Cloud-basierter Prozessdatenanalyse. Automation 2017, Baden-Baden. 2017.","van":"Schriegel S, Pethig F, Windmann S, Jasperneite J. PROFIanalytics - die Brücke zwischen PROFINET und Cloud-basierter Prozessdatenanalyse. Automation 2017, Baden-Baden. 2017;","din1505-2-1":"Schriegel, Sebastian ; Pethig, Florian ; Windmann, Stefan ; Jasperneite, Jürgen: PROFIanalytics - die Brücke zwischen PROFINET und Cloud-basierter Prozessdatenanalyse. In: Automation 2017, Baden-Baden (2017)","chicago-de":"Schriegel, Sebastian, Florian Pethig, Stefan Windmann und Jürgen Jasperneite. 2017. PROFIanalytics - die Brücke zwischen PROFINET und Cloud-basierter Prozessdatenanalyse. Automation 2017, Baden-Baden.","short":"S. Schriegel, F. Pethig, S. Windmann, J. Jasperneite, Automation 2017, Baden-Baden (2017)."}},{"year":2017,"author":[{"first_name":"Jürgen","last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public","title":"Wie kommt Industrie 4.0 in den Mittelstand? - Erfahrungen aus der SmartFactoryOWL","citation":{"chicago":"Jasperneite, Jürgen. “Wie Kommt Industrie 4.0 in Den Mittelstand? - Erfahrungen Aus Der SmartFactoryOWL.” I4KMU - NETZWERKTREFFEN FÜR KMU TESTUMGEBUNGEN (Keynote), Düsseldorf, 2017.","apa":"Jasperneite, J. (2017). Wie kommt Industrie 4.0 in den Mittelstand? - Erfahrungen aus der SmartFactoryOWL. I4KMU - NETZWERKTREFFEN FÜR KMU TESTUMGEBUNGEN (Keynote), Düsseldorf.","ufg":"Jasperneite, Jürgen (2017): Wie kommt Industrie 4.0 in den Mittelstand? - Erfahrungen aus der SmartFactoryOWL, in: I4KMU - NETZWERKTREFFEN FÜR KMU TESTUMGEBUNGEN (Keynote), Düsseldorf.","mla":"Jasperneite, Jürgen. “Wie Kommt Industrie 4.0 in Den Mittelstand? - Erfahrungen Aus Der SmartFactoryOWL.” I4KMU - NETZWERKTREFFEN FÜR KMU TESTUMGEBUNGEN (Keynote), Düsseldorf, 2017.","havard":"J. Jasperneite, Wie kommt Industrie 4.0 in den Mittelstand? - Erfahrungen aus der SmartFactoryOWL, I4KMU - NETZWERKTREFFEN FÜR KMU TESTUMGEBUNGEN (Keynote), Düsseldorf. (2017).","bjps":"Jasperneite J (2017) Wie Kommt Industrie 4.0 in Den Mittelstand? - Erfahrungen Aus Der SmartFactoryOWL. I4KMU - NETZWERKTREFFEN FÜR KMU TESTUMGEBUNGEN (Keynote), Düsseldorf.","van":"Jasperneite J. Wie kommt Industrie 4.0 in den Mittelstand? - Erfahrungen aus der SmartFactoryOWL. I4KMU - NETZWERKTREFFEN FÜR KMU TESTUMGEBUNGEN (Keynote), Düsseldorf. 2017;","din1505-2-1":"Jasperneite, Jürgen: Wie kommt Industrie 4.0 in den Mittelstand? - Erfahrungen aus der SmartFactoryOWL. In: I4KMU - NETZWERKTREFFEN FÜR KMU TESTUMGEBUNGEN (Keynote), Düsseldorf (2017)","chicago-de":"Jasperneite, Jürgen. 2017. Wie kommt Industrie 4.0 in den Mittelstand? - Erfahrungen aus der SmartFactoryOWL. I4KMU - NETZWERKTREFFEN FÜR KMU TESTUMGEBUNGEN (Keynote), Düsseldorf.","short":"J. Jasperneite, I4KMU - NETZWERKTREFFEN FÜR KMU TESTUMGEBUNGEN (Keynote), Düsseldorf (2017).","ieee":"J. Jasperneite, “Wie kommt Industrie 4.0 in den Mittelstand? - Erfahrungen aus der SmartFactoryOWL,” I4KMU - NETZWERKTREFFEN FÜR KMU TESTUMGEBUNGEN (Keynote), Düsseldorf, 2017.","ama":"Jasperneite J. Wie kommt Industrie 4.0 in den Mittelstand? - Erfahrungen aus der SmartFactoryOWL. I4KMU - NETZWERKTREFFEN FÜR KMU TESTUMGEBUNGEN (Keynote), Düsseldorf. 2017."},"_id":"4592","language":[{"iso":"eng"}],"publication":"I4KMU - NETZWERKTREFFEN FÜR KMU TESTUMGEBUNGEN (Keynote), Düsseldorf","type":"journal_article","date_created":"2021-01-28T09:51:26Z","user_id":"74222","date_updated":"2023-03-15T13:49:54Z"},{"status":"public","year":2017,"author":[{"last_name":"Ehrlich","first_name":"Marco","full_name":"Ehrlich, Marco","id":"61562"},{"last_name":"Trsek","full_name":"Trsek, Henning","id":"1486","first_name":"Henning"},{"full_name":"Wisniewski, Lukasz","first_name":"Lukasz","last_name":"Wisniewski","id":"1710"},{"full_name":"Jasperneite, Jürgen","first_name":"Jürgen","last_name":"Jasperneite","id":"1899"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"citation":{"ieee":"M. Ehrlich, H. Trsek, L. Wisniewski, and J. Jasperneite, “Automatic Mapping of Cyber Security Requirements to support Network Slicing in Software-Defined Networks,” in 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Limassol, Zypern, 2017.","ama":"Ehrlich M, Trsek H, Wisniewski L, Jasperneite J. Automatic Mapping of Cyber Security Requirements to support Network Slicing in Software-Defined Networks. In: 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Limassol, Zypern. ; 2017.","short":"M. Ehrlich, H. Trsek, L. Wisniewski, J. Jasperneite, in: 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Limassol, Zypern, 2017.","din1505-2-1":"Ehrlich, Marco ; Trsek, Henning ; Wisniewski, Lukasz ; Jasperneite, Jürgen: Automatic Mapping of Cyber Security Requirements to support Network Slicing in Software-Defined Networks. In: 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Limassol, Zypern, 2017","chicago-de":"Ehrlich, Marco, Henning Trsek, Lukasz Wisniewski und Jürgen Jasperneite. 2017. Automatic Mapping of Cyber Security Requirements to support Network Slicing in Software-Defined Networks. In: 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Limassol, Zypern.","apa":"Ehrlich, M., Trsek, H., Wisniewski, L., & Jasperneite, J. (2017). Automatic Mapping of Cyber Security Requirements to support Network Slicing in Software-Defined Networks. In 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Limassol, Zypern.","chicago":"Ehrlich, Marco, Henning Trsek, Lukasz Wisniewski, and Jürgen Jasperneite. “Automatic Mapping of Cyber Security Requirements to Support Network Slicing in Software-Defined Networks.” In 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Limassol, Zypern, 2017.","van":"Ehrlich M, Trsek H, Wisniewski L, Jasperneite J. Automatic Mapping of Cyber Security Requirements to support Network Slicing in Software-Defined Networks. In: 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Limassol, Zypern. 2017.","bjps":"Ehrlich M et al. (2017) Automatic Mapping of Cyber Security Requirements to Support Network Slicing in Software-Defined Networks. 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Limassol, Zypern.","mla":"Ehrlich, Marco, et al. “Automatic Mapping of Cyber Security Requirements to Support Network Slicing in Software-Defined Networks.” 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Limassol, Zypern, 2017.","havard":"M. Ehrlich, H. Trsek, L. Wisniewski, J. Jasperneite, Automatic Mapping of Cyber Security Requirements to support Network Slicing in Software-Defined Networks, in: 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Limassol, Zypern, 2017.","ufg":"Ehrlich, Marco et. al. (2017): Automatic Mapping of Cyber Security Requirements to support Network Slicing in Software-Defined Networks, in: 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Limassol, Zypern."},"title":"Automatic Mapping of Cyber Security Requirements to support Network Slicing in Software-Defined Networks","language":[{"iso":"eng"}],"_id":"4593","user_id":"74222","date_updated":"2023-03-15T13:49:54Z","publication":"22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Limassol, Zypern","type":"conference","date_created":"2021-01-28T09:52:45Z"},{"_id":"4594","place":"Limassol, Cyprus","language":[{"iso":"eng"}],"publication":"22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2017)","type":"conference","date_created":"2021-01-28T09:53:59Z","user_id":"74222","date_updated":"2023-03-15T13:49:54Z","author":[{"first_name":"Dominik","id":"52007","full_name":"Henneke, Dominik","last_name":"Henneke"},{"first_name":"Christian","last_name":"Freudenmann","full_name":"Freudenmann, Christian"},{"full_name":"Wisniewski, Lukasz","id":"1710","first_name":"Lukasz","last_name":"Wisniewski"},{"first_name":"Jürgen","id":"1899","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite"}],"year":2017,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public","title":"Implementation of Industrial Cloud Applications as Controlled Local Systems (CLS) in a Smart Grid Context","citation":{"din1505-2-1":"Henneke, Dominik ; Freudenmann, Christian ; Wisniewski, Lukasz ; Jasperneite, Jürgen: Implementation of Industrial Cloud Applications as Controlled Local Systems (CLS) in a Smart Grid Context. In: 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2017). Limassol, Cyprus, 2017","chicago-de":"Henneke, Dominik, Christian Freudenmann, Lukasz Wisniewski und Jürgen Jasperneite. 2017. Implementation of Industrial Cloud Applications as Controlled Local Systems (CLS) in a Smart Grid Context. In: 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2017). Limassol, Cyprus.","short":"D. Henneke, C. Freudenmann, L. Wisniewski, J. Jasperneite, in: 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2017), Limassol, Cyprus, 2017.","chicago":"Henneke, Dominik, Christian Freudenmann, Lukasz Wisniewski, and Jürgen Jasperneite. “Implementation of Industrial Cloud Applications as Controlled Local Systems (CLS) in a Smart Grid Context.” In 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2017). Limassol, Cyprus, 2017.","apa":"Henneke, D., Freudenmann, C., Wisniewski, L., & Jasperneite, J. (2017). Implementation of Industrial Cloud Applications as Controlled Local Systems (CLS) in a Smart Grid Context. In 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2017). Limassol, Cyprus.","ufg":"Henneke, Dominik et. al. (2017): Implementation of Industrial Cloud Applications as Controlled Local Systems (CLS) in a Smart Grid Context, in: 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2017), Limassol, Cyprus.","mla":"Henneke, Dominik, et al. “Implementation of Industrial Cloud Applications as Controlled Local Systems (CLS) in a Smart Grid Context.” 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2017), 2017.","bjps":"Henneke D et al. (2017) Implementation of Industrial Cloud Applications as Controlled Local Systems (CLS) in a Smart Grid Context. 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2017). Limassol, Cyprus.","havard":"D. Henneke, C. Freudenmann, L. Wisniewski, J. Jasperneite, Implementation of Industrial Cloud Applications as Controlled Local Systems (CLS) in a Smart Grid Context, in: 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2017), Limassol, Cyprus, 2017.","van":"Henneke D, Freudenmann C, Wisniewski L, Jasperneite J. Implementation of Industrial Cloud Applications as Controlled Local Systems (CLS) in a Smart Grid Context. In: 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2017). Limassol, Cyprus; 2017.","ieee":"D. Henneke, C. Freudenmann, L. Wisniewski, and J. Jasperneite, “Implementation of Industrial Cloud Applications as Controlled Local Systems (CLS) in a Smart Grid Context,” in 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2017), 2017.","ama":"Henneke D, Freudenmann C, Wisniewski L, Jasperneite J. Implementation of Industrial Cloud Applications as Controlled Local Systems (CLS) in a Smart Grid Context. In: 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2017). Limassol, Cyprus; 2017."}},{"citation":{"havard":"F. Pethig, S. Schriegel, A. Maier, J. Otto, S. Windmann, B. Böttcher, O. Niggemann, J. Jasperneite, Industrie 4.0 Communication Guideline Based on OPC UA, VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V., Frankfurt, Germany, 2017.","mla":"Pethig, Florian, et al. Industrie 4.0 Communication Guideline Based on OPC UA. VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V., 2017.","bjps":"Pethig F et al. (2017) Industrie 4.0 Communication Guideline Based on OPC UA. Frankfurt, Germany: VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V.","ufg":"Pethig, Florian et. al. (2017): Industrie 4.0 Communication Guideline Based on OPC UA, Frankfurt, Germany.","ama":"Pethig F, Schriegel S, Maier A, et al. Industrie 4.0 Communication Guideline Based on OPC UA. Frankfurt, Germany: VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V.; 2017.","van":"Pethig F, Schriegel S, Maier A, Otto J, Windmann S, Böttcher B, et al. Industrie 4.0 Communication Guideline Based on OPC UA. Frankfurt, Germany: VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V.; 2017.","chicago":"Pethig, Florian, Sebastian Schriegel, Alexander Maier, Jens Otto, Stefan Windmann, Björn Böttcher, Oliver Niggemann, and Jürgen Jasperneite. Industrie 4.0 Communication Guideline Based on OPC UA. Frankfurt, Germany: VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V., 2017.","ieee":"F. Pethig et al., Industrie 4.0 Communication Guideline Based on OPC UA. Frankfurt, Germany: VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V., 2017.","apa":"Pethig, F., Schriegel, S., Maier, A., Otto, J., Windmann, S., Böttcher, B., … Jasperneite, J. (2017). Industrie 4.0 Communication Guideline Based on OPC UA. Frankfurt, Germany: VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V.","din1505-2-1":"Pethig, Florian ; Schriegel, Sebastian ; Maier, Alexander ; Otto, Jens ; Windmann, Stefan ; Böttcher, Björn ; Niggemann, Oliver ; Jasperneite, Jürgen: Industrie 4.0 Communication Guideline Based on OPC UA. Frankfurt, Germany : VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V., 2017","chicago-de":"Pethig, Florian, Sebastian Schriegel, Alexander Maier, Jens Otto, Stefan Windmann, Björn Böttcher, Oliver Niggemann und Jürgen Jasperneite. 2017. Industrie 4.0 Communication Guideline Based on OPC UA. Frankfurt, Germany: VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V.","short":"F. Pethig, S. Schriegel, A. Maier, J. Otto, S. Windmann, B. Böttcher, O. Niggemann, J. Jasperneite, Industrie 4.0 Communication Guideline Based on OPC UA, VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V., Frankfurt, Germany, 2017."},"publication_status":"published","title":"Industrie 4.0 Communication Guideline Based on OPC UA","publisher":"VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V.","status":"public","year":2017,"author":[{"full_name":"Pethig, Florian","first_name":"Florian","last_name":"Pethig"},{"full_name":"Schriegel, Sebastian","first_name":"Sebastian","last_name":"Schriegel"},{"full_name":"Maier, Alexander","first_name":"Alexander","id":"11158","last_name":"Maier"},{"first_name":"Jens","full_name":"Otto, Jens","last_name":"Otto"},{"full_name":"Windmann, Stefan","first_name":"Stefan","last_name":"Windmann","id":"58525"},{"full_name":"Böttcher, Björn","first_name":"Björn","last_name":"Böttcher"},{"last_name":"Niggemann","id":"10876","first_name":"Oliver","full_name":"Niggemann, Oliver"},{"first_name":"Jürgen","full_name":"Jasperneite, Jürgen","id":"1899","last_name":"Jasperneite"}],"main_file_link":[{"open_access":"1"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"user_id":"15514","related_material":{"link":[{"url":"https://www.researchgate.net/publication/316432275_Industrie-40-Kommunikation_mit_OPC_UA","relation":"other"}]},"date_updated":"2023-03-15T13:49:54Z","publication_identifier":{"isbn":[" 978-3-8163-0709-9"]},"date_created":"2021-01-28T09:54:58Z","type":"book","_id":"4595","place":"Frankfurt, Germany","language":[{"iso":"eng"}],"oa":"1"},{"citation":{"ama":"Neumann A, Mytych MJ, Wesemann D, Wisniewski L, Jasperneite J. Approaches for in-vehicle communication -- an analysis and outlook. In: Computer Networks 24th International Conference, CN 2017, Lądek Zdrój, Poland, June 20-23, 2017, Proceedings. Lądek Zdrój, Poland: Springer International Publishing; 2017.","van":"Neumann A, Mytych MJ, Wesemann D, Wisniewski L, Jasperneite J. Approaches for in-vehicle communication -- an analysis and outlook. In: Computer Networks 24th International Conference, CN 2017, Lądek Zdrój, Poland, June 20-23, 2017, Proceedings. Lądek Zdrój, Poland: Springer International Publishing; 2017.","havard":"A. Neumann, M.J. Mytych, D. Wesemann, L. Wisniewski, J. Jasperneite, Approaches for in-vehicle communication -- an analysis and outlook, in: Computer Networks 24th International Conference, CN 2017, Lądek Zdrój, Poland, June 20-23, 2017, Proceedings, Springer International Publishing, Lądek Zdrój, Poland, 2017.","mla":"Neumann, Arne, et al. “Approaches for In-Vehicle Communication -- an Analysis and Outlook.” Computer Networks 24th International Conference, CN 2017, Lądek Zdrój, Poland, June 20-23, 2017, Proceedings, Springer International Publishing, 2017.","bjps":"Neumann A et al. (2017) Approaches for In-Vehicle Communication -- an Analysis and Outlook. Computer Networks 24th International Conference, CN 2017, Lądek Zdrój, Poland, June 20-23, 2017, Proceedings. Lądek Zdrój, Poland: Springer International Publishing.","ufg":"Neumann, Arne et. al. (2017): Approaches for in-vehicle communication -- an analysis and outlook, in: Computer Networks 24th International Conference, CN 2017, Lądek Zdrój, Poland, June 20-23, 2017, Proceedings, Lądek Zdrój, Poland.","ieee":"A. Neumann, M. J. Mytych, D. Wesemann, L. Wisniewski, and J. Jasperneite, “Approaches for in-vehicle communication -- an analysis and outlook,” in Computer Networks 24th International Conference, CN 2017, Lądek Zdrój, Poland, June 20-23, 2017, Proceedings, 2017.","apa":"Neumann, A., Mytych, M. J., Wesemann, D., Wisniewski, L., & Jasperneite, J. (2017). Approaches for in-vehicle communication -- an analysis and outlook. In Computer Networks 24th International Conference, CN 2017, Lądek Zdrój, Poland, June 20-23, 2017, Proceedings. Lądek Zdrój, Poland: Springer International Publishing.","chicago":"Neumann, Arne, Martin Jan Mytych, Derk Wesemann, Lukasz Wisniewski, and Jürgen Jasperneite. “Approaches for In-Vehicle Communication -- an Analysis and Outlook.” In Computer Networks 24th International Conference, CN 2017, Lądek Zdrój, Poland, June 20-23, 2017, Proceedings. Lądek Zdrój, Poland: Springer International Publishing, 2017.","short":"A. Neumann, M.J. Mytych, D. Wesemann, L. Wisniewski, J. Jasperneite, in: Computer Networks 24th International Conference, CN 2017, Lądek Zdrój, Poland, June 20-23, 2017, Proceedings, Springer International Publishing, Lądek Zdrój, Poland, 2017.","chicago-de":"Neumann, Arne, Martin Jan Mytych, Derk Wesemann, Lukasz Wisniewski und Jürgen Jasperneite. 2017. Approaches for in-vehicle communication -- an analysis and outlook. In: Computer Networks 24th International Conference, CN 2017, Lądek Zdrój, Poland, June 20-23, 2017, Proceedings. Lądek Zdrój, Poland: Springer International Publishing.","din1505-2-1":"Neumann, Arne ; Mytych, Martin Jan ; Wesemann, Derk ; Wisniewski, Lukasz ; Jasperneite, Jürgen: Approaches for in-vehicle communication -- an analysis and outlook. In: Computer Networks 24th International Conference, CN 2017, Lądek Zdrój, Poland, June 20-23, 2017, Proceedings. Lądek Zdrój, Poland : Springer International Publishing, 2017"},"title":"Approaches for in-vehicle communication -- an analysis and outlook","status":"public","publisher":"Springer International Publishing","author":[{"last_name":"Neumann","first_name":"Arne","id":"61915","full_name":"Neumann, Arne"},{"last_name":"Mytych","full_name":"Mytych, Martin Jan","first_name":"Martin Jan"},{"first_name":"Derk","last_name":"Wesemann","id":"1273","full_name":"Wesemann, Derk"},{"first_name":"Lukasz","id":"1710","last_name":"Wisniewski","full_name":"Wisniewski, Lukasz"},{"id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"}],"year":2017,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"abstract":[{"lang":"eng","text":"Electrical and electronic systems have been getting raising importance for innovations in the automotive industry. Networking issues are a key factor in this process since they enable distributed control functions and user interaction bringing together nodes from different vendors. This paper analyses available and emerging network technologies for in-vehicle communication from a requirements driven perspective. It reviews successful network technologies from other application areas regarding a possible deployment in vehicular communication and distinguishes passenger car and commercial vehicle sectors as far as possible. This contribution is oriented to the OSI reference model showing the state of the art and future opportunities at the level of the several communication layers with a focus on physical layer issues and medium access protocols and including information modeling aspects."}],"user_id":"74222","date_updated":"2023-03-15T13:49:54Z","publication":"Computer Networks 24th International Conference, CN 2017, Lądek Zdrój, Poland, June 20-23, 2017, Proceedings","date_created":"2021-01-28T09:57:09Z","type":"conference","place":"Lądek Zdrój, Poland","language":[{"iso":"eng"}],"_id":"4596"},{"language":[{"iso":"eng"}],"place":"Magdeburg","_id":"4597","date_updated":"2023-03-15T13:49:54Z","user_id":"74222","date_created":"2021-01-28T09:58:06Z","type":"conference","publication":"20. IFF-Wissenschaftstage in Magdeburg","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2017,"author":[{"first_name":"Florian","last_name":"Pethig","full_name":"Pethig, Florian"},{"id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen","last_name":"Jasperneite"}],"citation":{"chicago":"Pethig, Florian, and Jürgen Jasperneite. “Industrie 4.0-Kommunikation Mit OPC UA: Anwendungsfälle, Mehrwerte Und Migrationsstrategie.” In 20. IFF-Wissenschaftstage in Magdeburg. Magdeburg, 2017.","apa":"Pethig, F., & Jasperneite, J. (2017). Industrie 4.0-Kommunikation mit OPC UA: Anwendungsfälle, Mehrwerte und Migrationsstrategie. In 20. IFF-Wissenschaftstage in Magdeburg. Magdeburg.","ieee":"F. Pethig and J. Jasperneite, “Industrie 4.0-Kommunikation mit OPC UA: Anwendungsfälle, Mehrwerte und Migrationsstrategie,” in 20. IFF-Wissenschaftstage in Magdeburg, 2017.","ufg":"Pethig, Florian/Jasperneite, Jürgen (2017): Industrie 4.0-Kommunikation mit OPC UA: Anwendungsfälle, Mehrwerte und Migrationsstrategie, in: 20. IFF-Wissenschaftstage in Magdeburg, Magdeburg.","bjps":"Pethig F and Jasperneite J (2017) Industrie 4.0-Kommunikation Mit OPC UA: Anwendungsfälle, Mehrwerte Und Migrationsstrategie. 20. IFF-Wissenschaftstage in Magdeburg. Magdeburg.","havard":"F. Pethig, J. Jasperneite, Industrie 4.0-Kommunikation mit OPC UA: Anwendungsfälle, Mehrwerte und Migrationsstrategie, in: 20. IFF-Wissenschaftstage in Magdeburg, Magdeburg, 2017.","mla":"Pethig, Florian, and Jürgen Jasperneite. “Industrie 4.0-Kommunikation Mit OPC UA: Anwendungsfälle, Mehrwerte Und Migrationsstrategie.” 20. IFF-Wissenschaftstage in Magdeburg, 2017.","van":"Pethig F, Jasperneite J. Industrie 4.0-Kommunikation mit OPC UA: Anwendungsfälle, Mehrwerte und Migrationsstrategie. In: 20 IFF-Wissenschaftstage in Magdeburg. Magdeburg; 2017.","ama":"Pethig F, Jasperneite J. Industrie 4.0-Kommunikation mit OPC UA: Anwendungsfälle, Mehrwerte und Migrationsstrategie. In: 20. IFF-Wissenschaftstage in Magdeburg. Magdeburg; 2017.","chicago-de":"Pethig, Florian und Jürgen Jasperneite. 2017. Industrie 4.0-Kommunikation mit OPC UA: Anwendungsfälle, Mehrwerte und Migrationsstrategie. In: 20. IFF-Wissenschaftstage in Magdeburg. Magdeburg.","din1505-2-1":"Pethig, Florian ; Jasperneite, Jürgen: Industrie 4.0-Kommunikation mit OPC UA: Anwendungsfälle, Mehrwerte und Migrationsstrategie. In: 20. IFF-Wissenschaftstage in Magdeburg. Magdeburg, 2017","short":"F. Pethig, J. Jasperneite, in: 20. IFF-Wissenschaftstage in Magdeburg, Magdeburg, 2017."},"title":"Industrie 4.0-Kommunikation mit OPC UA: Anwendungsfälle, Mehrwerte und Migrationsstrategie"},{"title":"Evaluation of Multipath Communication Protocols for Reliable Internet-based Cyber-physical Systems","citation":{"ieee":"M. Elattar, M. Friesen, and J. Jasperneite, “Evaluation of Multipath Communication Protocols for Reliable Internet-based Cyber-physical Systems,” in 26th IEEE International Symposium on Industrial Electronics (ISIE), 2017.","ama":"Elattar M, Friesen M, Jasperneite J. Evaluation of Multipath Communication Protocols for Reliable Internet-based Cyber-physical Systems. In: 26th IEEE International Symposium on Industrial Electronics (ISIE). Edinburgh, Scotland; 2017.","apa":"Elattar, M., Friesen, M., & Jasperneite, J. (2017). Evaluation of Multipath Communication Protocols for Reliable Internet-based Cyber-physical Systems. In 26th IEEE International Symposium on Industrial Electronics (ISIE). Edinburgh, Scotland.","chicago":"Elattar, Mohammad, Maxim Friesen, and Jürgen Jasperneite. “Evaluation of Multipath Communication Protocols for Reliable Internet-Based Cyber-Physical Systems.” In 26th IEEE International Symposium on Industrial Electronics (ISIE). Edinburgh, Scotland, 2017.","van":"Elattar M, Friesen M, Jasperneite J. Evaluation of Multipath Communication Protocols for Reliable Internet-based Cyber-physical Systems. In: 26th IEEE International Symposium on Industrial Electronics (ISIE). Edinburgh, Scotland; 2017.","bjps":"Elattar M, Friesen M and Jasperneite J (2017) Evaluation of Multipath Communication Protocols for Reliable Internet-Based Cyber-Physical Systems. 26th IEEE International Symposium on Industrial Electronics (ISIE). Edinburgh, Scotland.","mla":"Elattar, Mohammad, et al. “Evaluation of Multipath Communication Protocols for Reliable Internet-Based Cyber-Physical Systems.” 26th IEEE International Symposium on Industrial Electronics (ISIE), 2017.","havard":"M. Elattar, M. Friesen, J. Jasperneite, Evaluation of Multipath Communication Protocols for Reliable Internet-based Cyber-physical Systems, in: 26th IEEE International Symposium on Industrial Electronics (ISIE), Edinburgh, Scotland, 2017.","ufg":"Elattar, Mohammad et. al. (2017): Evaluation of Multipath Communication Protocols for Reliable Internet-based Cyber-physical Systems, in: 26th IEEE International Symposium on Industrial Electronics (ISIE), Edinburgh, Scotland.","short":"M. Elattar, M. Friesen, J. Jasperneite, in: 26th IEEE International Symposium on Industrial Electronics (ISIE), Edinburgh, Scotland, 2017.","chicago-de":"Elattar, Mohammad, Maxim Friesen und Jürgen Jasperneite. 2017. Evaluation of Multipath Communication Protocols for Reliable Internet-based Cyber-physical Systems. In: 26th IEEE International Symposium on Industrial Electronics (ISIE). Edinburgh, Scotland.","din1505-2-1":"Elattar, Mohammad ; Friesen, Maxim ; Jasperneite, Jürgen: Evaluation of Multipath Communication Protocols for Reliable Internet-based Cyber-physical Systems. In: 26th IEEE International Symposium on Industrial Electronics (ISIE). Edinburgh, Scotland, 2017"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2017,"author":[{"first_name":"Mohammad","last_name":"Elattar","id":"58263","full_name":"Elattar, Mohammad"},{"id":"55044","first_name":"Maxim","last_name":"Friesen","full_name":"Friesen, Maxim"},{"full_name":"Jasperneite, Jürgen","first_name":"Jürgen","last_name":"Jasperneite","id":"1899"}],"status":"public","type":"conference","date_created":"2021-01-28T10:00:42Z","publication":"26th IEEE International Symposium on Industrial Electronics (ISIE)","date_updated":"2023-03-15T13:49:54Z","user_id":"74222","_id":"4598","language":[{"iso":"eng"}],"place":"Edinburgh, Scotland"},{"_id":"4599","language":[{"iso":"eng"}],"place":"Edinburgh, Scotland","date_updated":"2023-03-15T13:49:54Z","user_id":"74222","date_created":"2021-01-28T10:02:00Z","type":"conference","publication":"26th IEEE International Symposium on Industrial Electronics (ISIE)","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2017,"author":[{"full_name":"Elattar, Mohammad","first_name":"Mohammad","last_name":"Elattar","id":"58263"},{"last_name":"Cao","first_name":"Tong","full_name":"Cao, Tong"},{"first_name":"Verena","last_name":"Wendt","full_name":"Wendt, Verena"},{"last_name":"Jasperneite","first_name":"Jürgen","id":"1899","full_name":"Jasperneite, Jürgen"},{"last_name":"Trächtler","first_name":"Ansgar","full_name":"Trächtler, Ansgar"}],"citation":{"chicago":"Elattar, Mohammad, Tong Cao, Verena Wendt, Jürgen Jasperneite, and Ansgar Trächtler. “Reliable Multipath Communication Approach for Internet-Based Cyber-Physical Systems.” In 26th IEEE International Symposium on Industrial Electronics (ISIE). Edinburgh, Scotland, 2017.","apa":"Elattar, M., Cao, T., Wendt, V., Jasperneite, J., & Trächtler, A. (2017). Reliable Multipath Communication Approach for Internet-based Cyber-physical Systems. In 26th IEEE International Symposium on Industrial Electronics (ISIE). Edinburgh, Scotland.","ufg":"Elattar, Mohammad et. al. (2017): Reliable Multipath Communication Approach for Internet-based Cyber-physical Systems, in: 26th IEEE International Symposium on Industrial Electronics (ISIE), Edinburgh, Scotland.","bjps":"Elattar M et al. (2017) Reliable Multipath Communication Approach for Internet-Based Cyber-Physical Systems. 26th IEEE International Symposium on Industrial Electronics (ISIE). Edinburgh, Scotland.","havard":"M. Elattar, T. Cao, V. Wendt, J. Jasperneite, A. Trächtler, Reliable Multipath Communication Approach for Internet-based Cyber-physical Systems, in: 26th IEEE International Symposium on Industrial Electronics (ISIE), Edinburgh, Scotland, 2017.","mla":"Elattar, Mohammad, et al. “Reliable Multipath Communication Approach for Internet-Based Cyber-Physical Systems.” 26th IEEE International Symposium on Industrial Electronics (ISIE), 2017.","van":"Elattar M, Cao T, Wendt V, Jasperneite J, Trächtler A. Reliable Multipath Communication Approach for Internet-based Cyber-physical Systems. In: 26th IEEE International Symposium on Industrial Electronics (ISIE). Edinburgh, Scotland; 2017.","din1505-2-1":"Elattar, Mohammad ; Cao, Tong ; Wendt, Verena ; Jasperneite, Jürgen ; Trächtler, Ansgar: Reliable Multipath Communication Approach for Internet-based Cyber-physical Systems. In: 26th IEEE International Symposium on Industrial Electronics (ISIE). Edinburgh, Scotland, 2017","chicago-de":"Elattar, Mohammad, Tong Cao, Verena Wendt, Jürgen Jasperneite und Ansgar Trächtler. 2017. Reliable Multipath Communication Approach for Internet-based Cyber-physical Systems. In: 26th IEEE International Symposium on Industrial Electronics (ISIE). Edinburgh, Scotland.","short":"M. Elattar, T. Cao, V. Wendt, J. Jasperneite, A. Trächtler, in: 26th IEEE International Symposium on Industrial Electronics (ISIE), Edinburgh, Scotland, 2017.","ieee":"M. Elattar, T. Cao, V. Wendt, J. Jasperneite, and A. Trächtler, “Reliable Multipath Communication Approach for Internet-based Cyber-physical Systems,” in 26th IEEE International Symposium on Industrial Electronics (ISIE), 2017.","ama":"Elattar M, Cao T, Wendt V, Jasperneite J, Trächtler A. Reliable Multipath Communication Approach for Internet-based Cyber-physical Systems. In: 26th IEEE International Symposium on Industrial Electronics (ISIE). Edinburgh, Scotland; 2017."},"title":"Reliable Multipath Communication Approach for Internet-based Cyber-physical Systems"},{"date_updated":"2023-03-15T13:49:54Z","user_id":"74222","type":"conference","date_created":"2021-01-28T10:03:05Z","publication":"26th IEEE International Symposium on Industrial Electronics (ISIE 2017)","language":[{"iso":"eng"}],"place":"Edinburgh, Scotland, UK","_id":"4600","citation":{"short":"W. Ali Khan, L. Wisniewski, D. Lang, J. Jasperneite, in: 26th IEEE International Symposium on Industrial Electronics (ISIE 2017), Edinburgh, Scotland, UK, 2017.","chicago-de":"Ali Khan, Waqas, Lukasz Wisniewski, Dorota Lang und Jürgen Jasperneite. 2017. Analysis of the Requirements for offering Industrie 4.0 applications as a Cloud Service . In: 26th IEEE International Symposium on Industrial Electronics (ISIE 2017). Edinburgh, Scotland, UK.","din1505-2-1":"Ali Khan, Waqas ; Wisniewski, Lukasz ; Lang, Dorota ; Jasperneite, Jürgen: Analysis of the Requirements for offering Industrie 4.0 applications as a Cloud Service . In: 26th IEEE International Symposium on Industrial Electronics (ISIE 2017). Edinburgh, Scotland, UK, 2017","apa":"Ali Khan, W., Wisniewski, L., Lang, D., & Jasperneite, J. (2017). Analysis of the Requirements for offering Industrie 4.0 applications as a Cloud Service . In 26th IEEE International Symposium on Industrial Electronics (ISIE 2017). Edinburgh, Scotland, UK.","chicago":"Ali Khan, Waqas, Lukasz Wisniewski, Dorota Lang, and Jürgen Jasperneite. “Analysis of the Requirements for Offering Industrie 4.0 Applications as a Cloud Service .” In 26th IEEE International Symposium on Industrial Electronics (ISIE 2017). Edinburgh, Scotland, UK, 2017.","van":"Ali Khan W, Wisniewski L, Lang D, Jasperneite J. Analysis of the Requirements for offering Industrie 4.0 applications as a Cloud Service . In: 26th IEEE International Symposium on Industrial Electronics (ISIE 2017). Edinburgh, Scotland, UK; 2017.","ufg":"Ali Khan, Waqas et. al. (2017): Analysis of the Requirements for offering Industrie 4.0 applications as a Cloud Service , in: 26th IEEE International Symposium on Industrial Electronics (ISIE 2017), Edinburgh, Scotland, UK.","havard":"W. Ali Khan, L. Wisniewski, D. Lang, J. Jasperneite, Analysis of the Requirements for offering Industrie 4.0 applications as a Cloud Service , in: 26th IEEE International Symposium on Industrial Electronics (ISIE 2017), Edinburgh, Scotland, UK, 2017.","bjps":"Ali Khan W et al. (2017) Analysis of the Requirements for Offering Industrie 4.0 Applications as a Cloud Service . 26th IEEE International Symposium on Industrial Electronics (ISIE 2017). Edinburgh, Scotland, UK.","mla":"Ali Khan, Waqas, et al. “Analysis of the Requirements for Offering Industrie 4.0 Applications as a Cloud Service .” 26th IEEE International Symposium on Industrial Electronics (ISIE 2017), 2017.","ieee":"W. Ali Khan, L. Wisniewski, D. Lang, and J. Jasperneite, “Analysis of the Requirements for offering Industrie 4.0 applications as a Cloud Service ,” in 26th IEEE International Symposium on Industrial Electronics (ISIE 2017), 2017.","ama":"Ali Khan W, Wisniewski L, Lang D, Jasperneite J. Analysis of the Requirements for offering Industrie 4.0 applications as a Cloud Service . In: 26th IEEE International Symposium on Industrial Electronics (ISIE 2017). Edinburgh, Scotland, UK; 2017."},"title":"Analysis of the Requirements for offering Industrie 4.0 applications as a Cloud Service ","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2017,"author":[{"first_name":"Waqas","last_name":"Ali Khan","full_name":"Ali Khan, Waqas"},{"full_name":"Wisniewski, Lukasz","last_name":"Wisniewski","first_name":"Lukasz","id":"1710"},{"first_name":"Dorota","full_name":"Lang, Dorota","id":"68941","last_name":"Lang"},{"first_name":"Jürgen","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","id":"1899"}]},{"publication":"Automation 2017","type":"conference","date_created":"2021-01-28T10:04:08Z","user_id":"74222","date_updated":"2023-03-15T13:49:54Z","place":"Baden Baden, Germany","language":[{"iso":"eng"}],"_id":"4601","title":"Security Concept for a Cloud-based Automation Service","citation":{"din1505-2-1":"Ehrlich, Marco ; Trsek, Henning ; Lang, Dorota ; Wisniewski, Lukasz ; Wendt, Verena ; Jasperneite, Jürgen: Security Concept for a Cloud-based Automation Service. In: Automation 2017. Baden Baden, Germany : VDI, 2017, S. 1","chicago-de":"Ehrlich, Marco, Henning Trsek, Dorota Lang, Lukasz Wisniewski, Verena Wendt und Jürgen Jasperneite. 2017. Security Concept for a Cloud-based Automation Service. In: Automation 2017, 1. Baden Baden, Germany: VDI.","short":"M. Ehrlich, H. Trsek, D. Lang, L. Wisniewski, V. Wendt, J. Jasperneite, in: Automation 2017, VDI, Baden Baden, Germany, 2017, p. 1.","ufg":"Ehrlich, Marco et. al. (2017): Security Concept for a Cloud-based Automation Service, in: Automation 2017, Baden Baden, Germany, S. 1.","havard":"M. Ehrlich, H. Trsek, D. Lang, L. Wisniewski, V. Wendt, J. Jasperneite, Security Concept for a Cloud-based Automation Service, in: Automation 2017, VDI, Baden Baden, Germany, 2017: p. 1.","mla":"Ehrlich, Marco, et al. “Security Concept for a Cloud-Based Automation Service.” Automation 2017, VDI, 2017, p. 1.","bjps":"Ehrlich M et al. (2017) Security Concept for a Cloud-Based Automation Service. Automation 2017. Baden Baden, Germany: VDI, p. 1.","van":"Ehrlich M, Trsek H, Lang D, Wisniewski L, Wendt V, Jasperneite J. Security Concept for a Cloud-based Automation Service. In: Automation 2017. Baden Baden, Germany: VDI; 2017. p. 1.","chicago":"Ehrlich, Marco, Henning Trsek, Dorota Lang, Lukasz Wisniewski, Verena Wendt, and Jürgen Jasperneite. “Security Concept for a Cloud-Based Automation Service.” In Automation 2017, 1. Baden Baden, Germany: VDI, 2017.","apa":"Ehrlich, M., Trsek, H., Lang, D., Wisniewski, L., Wendt, V., & Jasperneite, J. (2017). Security Concept for a Cloud-based Automation Service. In Automation 2017 (p. 1). Baden Baden, Germany: VDI.","ama":"Ehrlich M, Trsek H, Lang D, Wisniewski L, Wendt V, Jasperneite J. Security Concept for a Cloud-based Automation Service. In: Automation 2017. Baden Baden, Germany: VDI; 2017:1.","ieee":"M. Ehrlich, H. Trsek, D. Lang, L. Wisniewski, V. Wendt, and J. Jasperneite, “Security Concept for a Cloud-based Automation Service,” in Automation 2017, 2017, p. 1."},"author":[{"first_name":"Marco","full_name":"Ehrlich, Marco","last_name":"Ehrlich","id":"61562"},{"id":"1486","last_name":"Trsek","first_name":"Henning","full_name":"Trsek, Henning"},{"last_name":"Lang","first_name":"Dorota","id":"68941","full_name":"Lang, Dorota"},{"last_name":"Wisniewski","first_name":"Lukasz","id":"1710","full_name":"Wisniewski, Lukasz"},{"full_name":"Wendt, Verena","first_name":"Verena","last_name":"Wendt"},{"id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen","last_name":"Jasperneite"}],"year":2017,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public","page":"1","publisher":"VDI"},{"language":[{"iso":"eng"}],"place":"Trondheim, Norway","_id":"4603","date_updated":"2023-03-15T13:49:54Z","user_id":"74222","type":"conference","date_created":"2021-01-28T10:10:20Z","publication":"13th IEEE International Workshop on Factory Communication Systems, WFCS 2017, 31.05.2017- 02.06.2017, (best WIP paper award)","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"id":"61915","first_name":"Arne","full_name":"Neumann, Arne","last_name":"Neumann"},{"last_name":"Ehrlich","first_name":"Marco","full_name":"Ehrlich, Marco","id":"61562"},{"first_name":"Lukasz","id":"1710","full_name":"Wisniewski, Lukasz","last_name":"Wisniewski"},{"full_name":"Jasperneite, Jürgen","first_name":"Jürgen","last_name":"Jasperneite","id":"1899"}],"year":2017,"abstract":[{"text":"Nowadays, industrial networks are characterized by complex architectures of hybrid, wired and wireless segments, combining automation and information technology (IT). Their operation is supported by network management facilities. Network monitoring is a basis for management as it provides the necessary status information. This paper presents an approach to apply a monitoring concept coming from the IT domain for an industrial wireless network as a step towards a uniform monitoring and management of heterogeneous networks.","lang":"eng"}],"citation":{"ama":"Neumann A, Ehrlich M, Wisniewski L, Jasperneite J. Towards monitoring of hybrid industrial networks. In: 13th IEEE International Workshop on Factory Communication Systems, WFCS 2017, 31.05.2017- 02.06.2017, (Best WIP Paper Award). Trondheim, Norway; 2017.","ieee":"A. Neumann, M. Ehrlich, L. Wisniewski, and J. Jasperneite, “Towards monitoring of hybrid industrial networks,” in 13th IEEE International Workshop on Factory Communication Systems, WFCS 2017, 31.05.2017- 02.06.2017, (best WIP paper award), 2017.","short":"A. Neumann, M. Ehrlich, L. Wisniewski, J. Jasperneite, in: 13th IEEE International Workshop on Factory Communication Systems, WFCS 2017, 31.05.2017- 02.06.2017, (Best WIP Paper Award), Trondheim, Norway, 2017.","chicago-de":"Neumann, Arne, Marco Ehrlich, Lukasz Wisniewski und Jürgen Jasperneite. 2017. Towards monitoring of hybrid industrial networks. In: 13th IEEE International Workshop on Factory Communication Systems, WFCS 2017, 31.05.2017- 02.06.2017, (best WIP paper award). Trondheim, Norway.","din1505-2-1":"Neumann, Arne ; Ehrlich, Marco ; Wisniewski, Lukasz ; Jasperneite, Jürgen: Towards monitoring of hybrid industrial networks. In: 13th IEEE International Workshop on Factory Communication Systems, WFCS 2017, 31.05.2017- 02.06.2017, (best WIP paper award). Trondheim, Norway, 2017","van":"Neumann A, Ehrlich M, Wisniewski L, Jasperneite J. Towards monitoring of hybrid industrial networks. In: 13th IEEE International Workshop on Factory Communication Systems, WFCS 2017, 31052017- 02062017, (best WIP paper award). Trondheim, Norway; 2017.","ufg":"Neumann, Arne et. al. (2017): Towards monitoring of hybrid industrial networks, in: 13th IEEE International Workshop on Factory Communication Systems, WFCS 2017, 31.05.2017- 02.06.2017, (best WIP paper award), Trondheim, Norway.","bjps":"Neumann A et al. (2017) Towards Monitoring of Hybrid Industrial Networks. 13th IEEE International Workshop on Factory Communication Systems, WFCS 2017, 31.05.2017- 02.06.2017, (Best WIP Paper Award). Trondheim, Norway.","havard":"A. Neumann, M. Ehrlich, L. Wisniewski, J. Jasperneite, Towards monitoring of hybrid industrial networks, in: 13th IEEE International Workshop on Factory Communication Systems, WFCS 2017, 31.05.2017- 02.06.2017, (Best WIP Paper Award), Trondheim, Norway, 2017.","mla":"Neumann, Arne, et al. “Towards Monitoring of Hybrid Industrial Networks.” 13th IEEE International Workshop on Factory Communication Systems, WFCS 2017, 31.05.2017- 02.06.2017, (Best WIP Paper Award), 2017.","apa":"Neumann, A., Ehrlich, M., Wisniewski, L., & Jasperneite, J. (2017). Towards monitoring of hybrid industrial networks. In 13th IEEE International Workshop on Factory Communication Systems, WFCS 2017, 31.05.2017- 02.06.2017, (best WIP paper award). Trondheim, Norway.","chicago":"Neumann, Arne, Marco Ehrlich, Lukasz Wisniewski, and Jürgen Jasperneite. “Towards Monitoring of Hybrid Industrial Networks.” In 13th IEEE International Workshop on Factory Communication Systems, WFCS 2017, 31.05.2017- 02.06.2017, (Best WIP Paper Award). Trondheim, Norway, 2017."},"title":"Towards monitoring of hybrid industrial networks"},{"citation":{"short":"M. Wollschläger, T. Sauter, J. Jasperneite, in: IEEE Industrial Electronics Magazine, IEEE, 2017.","din1505-2-1":"Wollschläger, Martin ; Sauter, Thilo ; Jasperneite, Jürgen: The Future of Industrial Communication. In: IEEE Industrial Electronics magazine : IEEE, 2017","chicago-de":"Wollschläger, Martin, Thilo Sauter und Jürgen Jasperneite. 2017. The Future of Industrial Communication. In: IEEE Industrial Electronics magazine. IEEE.","apa":"Wollschläger, M., Sauter, T., & Jasperneite, J. (2017). The Future of Industrial Communication. In IEEE Industrial Electronics magazine. IEEE.","ieee":"M. Wollschläger, T. Sauter, and J. Jasperneite, “The Future of Industrial Communication,” in IEEE Industrial Electronics magazine, 2017.","chicago":"Wollschläger, Martin, Thilo Sauter, and Jürgen Jasperneite. “The Future of Industrial Communication.” In IEEE Industrial Electronics Magazine. IEEE, 2017.","van":"Wollschläger M, Sauter T, Jasperneite J. The Future of Industrial Communication. In: IEEE Industrial Electronics magazine. IEEE; 2017.","ama":"Wollschläger M, Sauter T, Jasperneite J. The Future of Industrial Communication. In: IEEE Industrial Electronics Magazine. IEEE; 2017.","ufg":"Wollschläger, Martin et. al. (2017): The Future of Industrial Communication, in: IEEE Industrial Electronics magazine.","havard":"M. Wollschläger, T. Sauter, J. Jasperneite, The Future of Industrial Communication, in: IEEE Industrial Electronics Magazine, IEEE, 2017.","mla":"Wollschläger, Martin, et al. “The Future of Industrial Communication.” IEEE Industrial Electronics Magazine, IEEE, 2017.","bjps":"Wollschläger M, Sauter T and Jasperneite J (2017) The Future of Industrial Communication. IEEE Industrial Electronics Magazine. IEEE."},"title":"The Future of Industrial Communication","publisher":"IEEE","status":"public","author":[{"first_name":"Martin","full_name":"Wollschläger, Martin","last_name":"Wollschläger"},{"full_name":"Sauter, Thilo","first_name":"Thilo","last_name":"Sauter"},{"first_name":"Jürgen","id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen"}],"year":2017,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"user_id":"74222","date_updated":"2023-03-15T13:49:54Z","publication":"IEEE Industrial Electronics magazine","type":"conference","date_created":"2021-01-28T10:11:13Z","_id":"4604","language":[{"iso":"eng"}]},{"date_updated":"2024-05-22T15:20:03Z","user_id":"83779","date_created":"2021-04-16T12:17:39Z","type":"conference","language":[{"iso":"ger"}],"_id":"5574","publication_status":"published","citation":{"van":"Rossmann S, Wolff V, Müller U, Schneider J. Einfluss forcierter Lagerbedingungen auf die physikalische Alterung von Getränkeemulsionen. In 2017.","ama":"Rossmann S, Wolff V, Müller U, Schneider J. Einfluss forcierter Lagerbedingungen auf die physikalische Alterung von Getränkeemulsionen. In: ; 2017.","ufg":"Rossmann, Sören u. a.: Einfluss forcierter Lagerbedingungen auf die physikalische Alterung von Getränkeemulsionen, in: o. Hg.: o. O. 2017.","bjps":"Rossmann S et al. (2017) Einfluss forcierter Lagerbedingungen auf die physikalische Alterung von Getränkeemulsionen.","havard":"S. Rossmann, V. Wolff, U. Müller, J. Schneider, Einfluss forcierter Lagerbedingungen auf die physikalische Alterung von Getränkeemulsionen, in: 2017.","mla":"Rossmann, Sören, et al. Einfluss forcierter Lagerbedingungen auf die physikalische Alterung von Getränkeemulsionen. 2017.","apa":"Rossmann, S., Wolff, V., Müller, U., & Schneider, J. (2017). Einfluss forcierter Lagerbedingungen auf die physikalische Alterung von Getränkeemulsionen. ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik, Bruchsal.","ieee":"S. Rossmann, V. Wolff, U. Müller, and J. Schneider, “Einfluss forcierter Lagerbedingungen auf die physikalische Alterung von Getränkeemulsionen,” presented at the ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik, Bruchsal, 2017.","chicago":"Rossmann, Sören, V. Wolff, Ulrich Müller, and Jan Schneider. “Einfluss forcierter Lagerbedingungen auf die physikalische Alterung von Getränkeemulsionen,” 2017.","short":"S. Rossmann, V. Wolff, U. Müller, J. Schneider, in: 2017.","din1505-2-1":"Rossmann, Sören ; Wolff, V. ; Müller, Ulrich ; Schneider, Jan: Einfluss forcierter Lagerbedingungen auf die physikalische Alterung von Getränkeemulsionen. In: , 2017","chicago-de":"Rossmann, Sören, V. Wolff, Ulrich Müller und Jan Schneider. 2017. Einfluss forcierter Lagerbedingungen auf die physikalische Alterung von Getränkeemulsionen. In: ."},"title":"Einfluss forcierter Lagerbedingungen auf die physikalische Alterung von Getränkeemulsionen","status":"public","department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"conference":{"end_date":"2017-02-15","start_date":"2017-02-14","name":"ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik","location":"Bruchsal"},"year":"2017","author":[{"full_name":"Rossmann, Sören","first_name":"Sören","id":"61416","last_name":"Rossmann"},{"full_name":"Wolff, V.","first_name":"V.","last_name":"Wolff"},{"full_name":"Müller, Ulrich","id":"12119","last_name":"Müller","first_name":"Ulrich"},{"first_name":"Jan","id":"13209","full_name":"Schneider, Jan","last_name":"Schneider","orcid":"0000-0001-6401-8873"}]},{"language":[{"iso":"eng"}],"_id":"5575","oa":"1","user_id":"15514","date_updated":"2023-03-15T13:50:00Z","intvolume":" 70","publication":"BrewingScience ","publication_identifier":{"issn":["1866-5195"]},"date_created":"2021-04-16T12:19:58Z","type":"journal_article","status":"public","page":"31-38","publisher":"Carl","quality_controlled":"1","author":[{"first_name":"Sören","full_name":"Rossmann, Sören","last_name":"Rossmann","id":"61416"},{"first_name":"V.","last_name":"Wolff","full_name":"Wolff, V."},{"last_name":"Müller","full_name":"Müller, Ulrich","id":"12119","first_name":"Ulrich"},{"first_name":"Jan","last_name":"Schneider","id":"13209","full_name":"Schneider, Jan"}],"main_file_link":[{"url":"https://www.researchgate.net/publication/315111587_Impact_of_Accelerated_Shelf-life_Tests_on_Physical_Stability_of_Beverages_Based_on_Weighted_Orange_Oil_Emulsions","open_access":"1"}],"year":2017,"department":[{"_id":"DEP4023"}],"issue":"1-2","citation":{"din1505-2-1":"Rossmann, Sören ; Wolff, V. ; Müller, Ulrich ; Schneider, Jan: Impact of Accelerated Shelf-life Tests on Physical Stability of Beverages Based on Weighted Orange Oil Emulsions. In: BrewingScience Bd. 70, Carl (2017), Nr. 1–2, S. 31–38","chicago-de":"Rossmann, Sören, V. Wolff, Ulrich Müller und Jan Schneider. 2017. Impact of Accelerated Shelf-life Tests on Physical Stability of Beverages Based on Weighted Orange Oil Emulsions. BrewingScience 70, Nr. 1–2: 31–38.","short":"S. Rossmann, V. Wolff, U. Müller, J. Schneider, BrewingScience 70 (2017) 31–38.","chicago":"Rossmann, Sören, V. Wolff, Ulrich Müller, and Jan Schneider. “Impact of Accelerated Shelf-Life Tests on Physical Stability of Beverages Based on Weighted Orange Oil Emulsions.” BrewingScience 70, no. 1–2 (2017): 31–38.","apa":"Rossmann, S., Wolff, V., Müller, U., & Schneider, J. (2017). Impact of Accelerated Shelf-life Tests on Physical Stability of Beverages Based on Weighted Orange Oil Emulsions. BrewingScience , 70(1–2), 31–38.","ufg":"Rossmann, Sören et. al. (2017): Impact of Accelerated Shelf-life Tests on Physical Stability of Beverages Based on Weighted Orange Oil Emulsions, in: BrewingScience 70 (1–2), S. 31–38.","havard":"S. Rossmann, V. Wolff, U. Müller, J. Schneider, Impact of Accelerated Shelf-life Tests on Physical Stability of Beverages Based on Weighted Orange Oil Emulsions, BrewingScience . 70 (2017) 31–38.","bjps":"Rossmann S et al. (2017) Impact of Accelerated Shelf-Life Tests on Physical Stability of Beverages Based on Weighted Orange Oil Emulsions. BrewingScience 70, 31–38.","mla":"Rossmann, Sören, et al. “Impact of Accelerated Shelf-Life Tests on Physical Stability of Beverages Based on Weighted Orange Oil Emulsions.” BrewingScience , vol. 70, no. 1–2, Carl, 2017, pp. 31–38.","van":"Rossmann S, Wolff V, Müller U, Schneider J. Impact of Accelerated Shelf-life Tests on Physical Stability of Beverages Based on Weighted Orange Oil Emulsions. BrewingScience . 2017;70(1–2):31–8.","ieee":"S. Rossmann, V. Wolff, U. Müller, and J. Schneider, “Impact of Accelerated Shelf-life Tests on Physical Stability of Beverages Based on Weighted Orange Oil Emulsions,” BrewingScience , vol. 70, no. 1–2, pp. 31–38, 2017.","ama":"Rossmann S, Wolff V, Müller U, Schneider J. Impact of Accelerated Shelf-life Tests on Physical Stability of Beverages Based on Weighted Orange Oil Emulsions. BrewingScience . 2017;70(1-2):31-38."},"volume":70,"publication_status":"published","title":"Impact of Accelerated Shelf-life Tests on Physical Stability of Beverages Based on Weighted Orange Oil Emulsions"},{"page":"74-84","status":"public","department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"author":[{"id":"43927","full_name":"Broeker, Timo","last_name":"Broeker","first_name":"Timo"},{"last_name":"Hoffarth","full_name":"Hoffarth, Marc","first_name":"Marc","id":"52330"},{"last_name":"Oppermann","first_name":"L.","full_name":"Oppermann, L."},{"last_name":"Wolff","first_name":"V.","full_name":"Wolff, V."},{"full_name":"Neubauer, Pia Rebecca","id":"75420","last_name":"Neubauer","first_name":"Pia Rebecca"},{"full_name":"Schneider, Jan","first_name":"Jan","last_name":"Schneider","id":"13209","orcid":"0000-0001-6401-8873"}],"year":"2017","issue":"3-4","publication_status":"published","volume":70,"citation":{"apa":"Broeker, T., Hoffarth, M., Oppermann, L., Wolff, V., Neubauer, P. R., & Schneider, J. (2017). Oxidation of Brewers Spent Grain for the Release of Fermentable Sugars by Direct Pretreatment in an Electrolysis Reactor. BrewingScience, 70(3–4), 74–84.","chicago":"Broeker, Timo, Marc Hoffarth, L. Oppermann, V. Wolff, Pia Rebecca Neubauer, and Jan Schneider. “Oxidation of Brewers Spent Grain for the Release of Fermentable Sugars by Direct Pretreatment in an Electrolysis Reactor.” BrewingScience 70, no. 3–4 (2017): 74–84.","van":"Broeker T, Hoffarth M, Oppermann L, Wolff V, Neubauer PR, Schneider J. Oxidation of Brewers Spent Grain for the Release of Fermentable Sugars by Direct Pretreatment in an Electrolysis Reactor. BrewingScience. 2017;70(3–4):74–84.","bjps":"Broeker T et al. (2017) Oxidation of Brewers Spent Grain for the Release of Fermentable Sugars by Direct Pretreatment in an Electrolysis Reactor. BrewingScience 70, 74–84.","havard":"T. Broeker, M. Hoffarth, L. Oppermann, V. Wolff, P.R. Neubauer, J. Schneider, Oxidation of Brewers Spent Grain for the Release of Fermentable Sugars by Direct Pretreatment in an Electrolysis Reactor, BrewingScience. 70 (2017) 74–84.","mla":"Broeker, Timo, et al. “Oxidation of Brewers Spent Grain for the Release of Fermentable Sugars by Direct Pretreatment in an Electrolysis Reactor.” BrewingScience, vol. 70, no. 3–4, 2017, pp. 74–84.","ufg":"Broeker, Timo u. a.: Oxidation of Brewers Spent Grain for the Release of Fermentable Sugars by Direct Pretreatment in an Electrolysis Reactor, in: BrewingScience 70 (2017), H. 3–4, S. 74–84.","short":"T. Broeker, M. Hoffarth, L. Oppermann, V. Wolff, P.R. Neubauer, J. Schneider, BrewingScience 70 (2017) 74–84.","chicago-de":"Broeker, Timo, Marc Hoffarth, L. Oppermann, V. Wolff, Pia Rebecca Neubauer und Jan Schneider. 2017. Oxidation of Brewers Spent Grain for the Release of Fermentable Sugars by Direct Pretreatment in an Electrolysis Reactor. BrewingScience 70, Nr. 3–4: 74–84.","din1505-2-1":"Broeker, Timo ; Hoffarth, Marc ; Oppermann, L. ; Wolff, V. ; Neubauer, Pia Rebecca ; Schneider, Jan: Oxidation of Brewers Spent Grain for the Release of Fermentable Sugars by Direct Pretreatment in an Electrolysis Reactor. In: BrewingScience Bd. 70 (2017), Nr. 3–4, S. 74–84","ieee":"T. Broeker, M. Hoffarth, L. Oppermann, V. Wolff, P. R. Neubauer, and J. Schneider, “Oxidation of Brewers Spent Grain for the Release of Fermentable Sugars by Direct Pretreatment in an Electrolysis Reactor,” BrewingScience, vol. 70, no. 3–4, pp. 74–84, 2017.","ama":"Broeker T, Hoffarth M, Oppermann L, Wolff V, Neubauer PR, Schneider J. Oxidation of Brewers Spent Grain for the Release of Fermentable Sugars by Direct Pretreatment in an Electrolysis Reactor. BrewingScience. 2017;70(3-4):74-84."},"title":"Oxidation of Brewers Spent Grain for the Release of Fermentable Sugars by Direct Pretreatment in an Electrolysis Reactor","language":[{"iso":"eng"}],"_id":"5576","date_updated":"2024-05-22T15:20:45Z","user_id":"83779","intvolume":" 70","date_created":"2021-04-16T12:29:25Z","type":"journal_article","publication":"BrewingScience"},{"date_updated":"2024-05-22T15:26:02Z","user_id":"83779","type":"conference","date_created":"2021-04-16T12:32:40Z","language":[{"iso":"eng"}],"_id":"5578","publication_status":"published","citation":{"ama":"Rossmann S, Wolff V, Müller U, Schneider J. Comparative study of accelerated shelf-life tests on physical ageing of beverages containing weighted flavor emulsions. In: ; 2017.","ieee":"S. Rossmann, V. Wolff, U. Müller, and J. Schneider, “Comparative study of accelerated shelf-life tests on physical ageing of beverages containing weighted flavor emulsions,” presented at the 36th EBC Congress, Ljubljan (Slovenia, 2017.","van":"Rossmann S, Wolff V, Müller U, Schneider J. Comparative study of accelerated shelf-life tests on physical ageing of beverages containing weighted flavor emulsions. In 2017.","ufg":"Rossmann, Sören u. a.: Comparative study of accelerated shelf-life tests on physical ageing of beverages containing weighted flavor emulsions, in: o. Hg.: o. O. 2017.","mla":"Rossmann, Sören, et al. Comparative Study of Accelerated Shelf-Life Tests on Physical Ageing of Beverages Containing Weighted Flavor Emulsions. 2017.","bjps":"Rossmann S et al. (2017) Comparative Study of Accelerated Shelf-Life Tests on Physical Ageing of Beverages Containing Weighted Flavor Emulsions.","havard":"S. Rossmann, V. Wolff, U. Müller, J. Schneider, Comparative study of accelerated shelf-life tests on physical ageing of beverages containing weighted flavor emulsions, in: 2017.","apa":"Rossmann, S., Wolff, V., Müller, U., & Schneider, J. (2017). Comparative study of accelerated shelf-life tests on physical ageing of beverages containing weighted flavor emulsions. 36th EBC Congress, Ljubljan (Slovenia.","chicago":"Rossmann, Sören, V. Wolff, Ulrich Müller, and Jan Schneider. “Comparative Study of Accelerated Shelf-Life Tests on Physical Ageing of Beverages Containing Weighted Flavor Emulsions,” 2017.","short":"S. Rossmann, V. Wolff, U. Müller, J. Schneider, in: 2017.","din1505-2-1":"Rossmann, Sören ; Wolff, V. ; Müller, Ulrich ; Schneider, Jan: Comparative study of accelerated shelf-life tests on physical ageing of beverages containing weighted flavor emulsions. In: , 2017","chicago-de":"Rossmann, Sören, V. Wolff, Ulrich Müller und Jan Schneider. 2017. Comparative study of accelerated shelf-life tests on physical ageing of beverages containing weighted flavor emulsions. In: ."},"title":"Comparative study of accelerated shelf-life tests on physical ageing of beverages containing weighted flavor emulsions","status":"public","conference":{"location":" Ljubljan (Slovenia","name":"36th EBC Congress"},"department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"year":"2017","author":[{"full_name":"Rossmann, Sören","id":"61416","first_name":"Sören","last_name":"Rossmann"},{"full_name":"Wolff, V.","first_name":"V.","last_name":"Wolff"},{"full_name":"Müller, Ulrich","first_name":"Ulrich","id":"12119","last_name":"Müller"},{"id":"13209","full_name":"Schneider, Jan","last_name":"Schneider","first_name":"Jan","orcid":"0000-0001-6401-8873"}]},{"language":[{"iso":"eng"}],"_id":"5579","date_updated":"2024-05-22T15:28:00Z","user_id":"83779","type":"conference","date_created":"2021-04-16T12:34:44Z","status":"public","department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"conference":{"location":"Ljubljana (Slovenia)","name":"36th EBC Congress"},"author":[{"orcid":"0000-0001-6401-8873","first_name":"Jan","full_name":"Schneider, Jan","last_name":"Schneider","id":"13209"},{"first_name":"Marc","full_name":"Hoffarth, Marc","id":"52330","last_name":"Hoffarth"},{"id":"43927","first_name":"Timo","full_name":"Broeker, Timo","last_name":"Broeker"}],"year":"2017","citation":{"ama":"Schneider J, Hoffarth M, Broeker T. Wet oxidation of spent grains from breweries for the production of fermentable sugars. In: ; 2017.","ieee":"J. Schneider, M. Hoffarth, and T. Broeker, “Wet oxidation of spent grains from breweries for the production of fermentable sugars,” presented at the 36th EBC Congress, Ljubljana (Slovenia), 2017.","van":"Schneider J, Hoffarth M, Broeker T. Wet oxidation of spent grains from breweries for the production of fermentable sugars. In 2017.","havard":"J. Schneider, M. Hoffarth, T. Broeker, Wet oxidation of spent grains from breweries for the production of fermentable sugars, in: 2017.","mla":"Schneider, Jan, et al. Wet Oxidation of Spent Grains from Breweries for the Production of Fermentable Sugars. 2017.","bjps":"Schneider J, Hoffarth M and Broeker T (2017) Wet Oxidation of Spent Grains from Breweries for the Production of Fermentable Sugars.","ufg":"Schneider, Jan/Hoffarth, Marc/Broeker, Timo: Wet oxidation of spent grains from breweries for the production of fermentable sugars, in: o. Hg.: o. O. 2017.","apa":"Schneider, J., Hoffarth, M., & Broeker, T. (2017). Wet oxidation of spent grains from breweries for the production of fermentable sugars. 36th EBC Congress, Ljubljana (Slovenia).","chicago":"Schneider, Jan, Marc Hoffarth, and Timo Broeker. “Wet Oxidation of Spent Grains from Breweries for the Production of Fermentable Sugars,” 2017.","short":"J. Schneider, M. Hoffarth, T. Broeker, in: 2017.","din1505-2-1":"Schneider, Jan ; Hoffarth, Marc ; Broeker, Timo: Wet oxidation of spent grains from breweries for the production of fermentable sugars. In: , 2017","chicago-de":"Schneider, Jan, Marc Hoffarth und Timo Broeker. 2017. Wet oxidation of spent grains from breweries for the production of fermentable sugars. In: ."},"title":"Wet oxidation of spent grains from breweries for the production of fermentable sugars"},{"title":"Study on the implementation of a biocatalytic power-to-gas reactor in a brewery","citation":{"mla":"Broeker, Timo, et al. Study on the Implementation of a Biocatalytic Power-to-Gas Reactor in a Brewery. 2017.","bjps":"Broeker T et al. (2017) Study on the Implementation of a Biocatalytic Power-to-Gas Reactor in a Brewery.","havard":"T. Broeker, M. Hoffarth, K. Heikrodt, J. Schneider, Study on the implementation of a biocatalytic power-to-gas reactor in a brewery, in: 2017.","ufg":"Broeker, Timo u. a.: Study on the implementation of a biocatalytic power-to-gas reactor in a brewery, in: o. Hg.: o. O. 2017.","van":"Broeker T, Hoffarth M, Heikrodt K, Schneider J. Study on the implementation of a biocatalytic power-to-gas reactor in a brewery. In 2017.","chicago":"Broeker, Timo, Marc Hoffarth, Klaus Heikrodt, and Jan Schneider. “Study on the Implementation of a Biocatalytic Power-to-Gas Reactor in a Brewery,” 2017.","apa":"Broeker, T., Hoffarth, M., Heikrodt, K., & Schneider, J. (2017). Study on the implementation of a biocatalytic power-to-gas reactor in a brewery. 36th EBC Congress, Ljubljana (Slovenia).","din1505-2-1":"Broeker, Timo ; Hoffarth, Marc ; Heikrodt, Klaus ; Schneider, Jan: Study on the implementation of a biocatalytic power-to-gas reactor in a brewery. In: , 2017","chicago-de":"Broeker, Timo, Marc Hoffarth, Klaus Heikrodt und Jan Schneider. 2017. Study on the implementation of a biocatalytic power-to-gas reactor in a brewery. In: .","short":"T. Broeker, M. Hoffarth, K. Heikrodt, J. Schneider, in: 2017.","ama":"Broeker T, Hoffarth M, Heikrodt K, Schneider J. Study on the implementation of a biocatalytic power-to-gas reactor in a brewery. In: ; 2017.","ieee":"T. Broeker, M. Hoffarth, K. Heikrodt, and J. Schneider, “Study on the implementation of a biocatalytic power-to-gas reactor in a brewery,” presented at the 36th EBC Congress, Ljubljana (Slovenia), 2017."},"author":[{"id":"43927","full_name":"Broeker, Timo","last_name":"Broeker","first_name":"Timo"},{"last_name":"Hoffarth","full_name":"Hoffarth, Marc","id":"52330","first_name":"Marc"},{"full_name":"Heikrodt, Klaus","first_name":"Klaus","last_name":"Heikrodt","id":"46269"},{"id":"13209","first_name":"Jan","last_name":"Schneider","full_name":"Schneider, Jan","orcid":"0000-0001-6401-8873"}],"year":"2017","conference":{"location":"Ljubljana (Slovenia)","name":"36th EBC Congress"},"department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"status":"public","type":"conference_abstract","date_created":"2021-04-16T12:36:47Z","user_id":"83779","date_updated":"2024-05-22T15:28:31Z","_id":"5580","language":[{"iso":"eng"}]},{"date_created":"2021-04-16T12:38:24Z","type":"conference","date_updated":"2024-05-22T15:29:15Z","user_id":"83779","_id":"5581","language":[{"iso":"ger"}],"title":"Innovation in der Brauerei - Konzept einer kontinuierlichen Maischeanalge durch intelligente Vernetzung mit moderner Sensortechnik","publication_status":"published","citation":{"ama":"Conradi F, Wefing P. Innovation in der Brauerei - Konzept einer kontinuierlichen Maischeanalge durch intelligente Vernetzung mit moderner Sensortechnik. In: ; 2017.","ieee":"F. Conradi and P. Wefing, “Innovation in der Brauerei - Konzept einer kontinuierlichen Maischeanalge durch intelligente Vernetzung mit moderner Sensortechnik,” presented at the Studierendenkongress Junge DLG, Lemgo, 2017.","chicago-de":"Conradi, Florian und Patrick Wefing. 2017. Innovation in der Brauerei - Konzept einer kontinuierlichen Maischeanalge durch intelligente Vernetzung mit moderner Sensortechnik. In: .","din1505-2-1":"Conradi, Florian ; Wefing, Patrick: Innovation in der Brauerei - Konzept einer kontinuierlichen Maischeanalge durch intelligente Vernetzung mit moderner Sensortechnik. In: , 2017","short":"F. Conradi, P. Wefing, in: 2017.","ufg":"Conradi, Florian/Wefing, Patrick: Innovation in der Brauerei - Konzept einer kontinuierlichen Maischeanalge durch intelligente Vernetzung mit moderner Sensortechnik, in: o. Hg.: o. O. 2017.","bjps":"Conradi F and Wefing P (2017) Innovation in der Brauerei - Konzept einer kontinuierlichen Maischeanalge durch intelligente Vernetzung mit moderner Sensortechnik.","mla":"Conradi, Florian, and Patrick Wefing. Innovation in der Brauerei - Konzept einer kontinuierlichen Maischeanalge durch intelligente Vernetzung mit moderner Sensortechnik. 2017.","havard":"F. Conradi, P. Wefing, Innovation in der Brauerei - Konzept einer kontinuierlichen Maischeanalge durch intelligente Vernetzung mit moderner Sensortechnik, in: 2017.","van":"Conradi F, Wefing P. Innovation in der Brauerei - Konzept einer kontinuierlichen Maischeanalge durch intelligente Vernetzung mit moderner Sensortechnik. In 2017.","chicago":"Conradi, Florian, and Patrick Wefing. “Innovation in der Brauerei - Konzept einer kontinuierlichen Maischeanalge durch intelligente Vernetzung mit moderner Sensortechnik,” 2017.","apa":"Conradi, F., & Wefing, P. (2017). Innovation in der Brauerei - Konzept einer kontinuierlichen Maischeanalge durch intelligente Vernetzung mit moderner Sensortechnik. Studierendenkongress Junge DLG, Lemgo."},"conference":{"location":"Lemgo","name":"Studierendenkongress Junge DLG"},"department":[{"_id":"DEP4023"},{"_id":"DEP1308"},{"_id":"DEP4018"}],"year":"2017","author":[{"last_name":"Conradi","first_name":"Florian","id":"68967","full_name":"Conradi, Florian"},{"first_name":"Patrick","full_name":"Wefing, Patrick","last_name":"Wefing","id":"68976"}],"status":"public"},{"department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"conference":{"name":"Kolloquium Zukunftsenergien","location":"Lemgo"},"year":"2017","author":[{"first_name":"Marc","full_name":"Hoffarth, Marc","id":"52330","last_name":"Hoffarth"}],"status":"public","title":"Biokatalytische Methanisierung - Synthetisches Erdgas aus regenerativen Quellen","publication_status":"published","citation":{"apa":"Hoffarth, M. (2017). Biokatalytische Methanisierung - Synthetisches Erdgas aus regenerativen Quellen. Kolloquium Zukunftsenergien, Lemgo.","chicago":"Hoffarth, Marc. “Biokatalytische Methanisierung - Synthetisches Erdgas aus regenerativen Quellen,” 2017.","van":"Hoffarth M. Biokatalytische Methanisierung - Synthetisches Erdgas aus regenerativen Quellen. In 2017.","ufg":"Hoffarth, Marc: Biokatalytische Methanisierung - Synthetisches Erdgas aus regenerativen Quellen, in: o. Hg.: o. O. 2017.","havard":"M. Hoffarth, Biokatalytische Methanisierung - Synthetisches Erdgas aus regenerativen Quellen, in: 2017.","bjps":"Hoffarth M (2017) Biokatalytische Methanisierung - Synthetisches Erdgas aus regenerativen Quellen.","mla":"Hoffarth, Marc. Biokatalytische Methanisierung - Synthetisches Erdgas aus regenerativen Quellen. 2017.","short":"M. Hoffarth, in: 2017.","chicago-de":"Hoffarth, Marc. 2017. Biokatalytische Methanisierung - Synthetisches Erdgas aus regenerativen Quellen. In: .","din1505-2-1":"Hoffarth, Marc: Biokatalytische Methanisierung - Synthetisches Erdgas aus regenerativen Quellen. In: , 2017","ieee":"M. Hoffarth, “Biokatalytische Methanisierung - Synthetisches Erdgas aus regenerativen Quellen,” presented at the Kolloquium Zukunftsenergien, Lemgo, 2017.","ama":"Hoffarth M. Biokatalytische Methanisierung - Synthetisches Erdgas aus regenerativen Quellen. In: ; 2017."},"_id":"5582","language":[{"iso":"ger"}],"type":"conference_abstract","date_created":"2021-04-16T12:44:28Z","date_updated":"2024-05-22T15:29:50Z","user_id":"83779"},{"_id":"5583","language":[{"iso":"ger"}],"type":"conference","date_created":"2021-04-16T12:45:47Z","user_id":"83779","date_updated":"2024-05-22T15:30:32Z","author":[{"full_name":"Broeker, Timo","last_name":"Broeker","first_name":"Timo","id":"43927"}],"year":"2017","department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"conference":{"location":"Lemgo","name":"Internes Symposium \"Umwelt und Ressourcen\""},"status":"public","title":"Bioraffinerie und Sektorenkopplung – biokatalytische Methanisierung als Schlüsseltechnologie zur Implementierung von Power-to-Gas","citation":{"ama":"Broeker T. Bioraffinerie und Sektorenkopplung – biokatalytische Methanisierung als Schlüsseltechnologie zur Implementierung von Power-to-Gas. In: ; 2017.","ieee":"T. Broeker, “Bioraffinerie und Sektorenkopplung – biokatalytische Methanisierung als Schlüsseltechnologie zur Implementierung von Power-to-Gas,” presented at the Internes Symposium “Umwelt und Ressourcen,” Lemgo, 2017.","mla":"Broeker, Timo. Bioraffinerie und Sektorenkopplung – biokatalytische Methanisierung als Schlüsseltechnologie zur Implementierung von Power-to-Gas. 2017.","havard":"T. Broeker, Bioraffinerie und Sektorenkopplung – biokatalytische Methanisierung als Schlüsseltechnologie zur Implementierung von Power-to-Gas, in: 2017.","bjps":"Broeker T (2017) Bioraffinerie und Sektorenkopplung – biokatalytische Methanisierung als Schlüsseltechnologie zur Implementierung von Power-to-Gas.","ufg":"Broeker, Timo: Bioraffinerie und Sektorenkopplung – biokatalytische Methanisierung als Schlüsseltechnologie zur Implementierung von Power-to-Gas, in: o. Hg.: o. O. 2017.","van":"Broeker T. Bioraffinerie und Sektorenkopplung – biokatalytische Methanisierung als Schlüsseltechnologie zur Implementierung von Power-to-Gas. In 2017.","chicago":"Broeker, Timo. “Bioraffinerie und Sektorenkopplung – biokatalytische Methanisierung als Schlüsseltechnologie zur Implementierung von Power-to-Gas,” 2017.","apa":"Broeker, T. (2017). Bioraffinerie und Sektorenkopplung – biokatalytische Methanisierung als Schlüsseltechnologie zur Implementierung von Power-to-Gas. Internes Symposium “Umwelt und Ressourcen,” Lemgo.","chicago-de":"Broeker, Timo. 2017. Bioraffinerie und Sektorenkopplung – biokatalytische Methanisierung als Schlüsseltechnologie zur Implementierung von Power-to-Gas. In: .","din1505-2-1":"Broeker, Timo: Bioraffinerie und Sektorenkopplung – biokatalytische Methanisierung als Schlüsseltechnologie zur Implementierung von Power-to-Gas. In: , 2017","short":"T. Broeker, in: 2017."},"publication_status":"published"},{"date_created":"2021-04-16T12:47:20Z","type":"conference","user_id":"83779","date_updated":"2024-05-22T15:31:05Z","_id":"5584","language":[{"iso":"ger"}],"title":"bioCONNECT - Wasserstoff und biogenes CO2 im Verbund","citation":{"chicago-de":"Broeker, Timo. 2017. bioCONNECT - Wasserstoff und biogenes CO2 im Verbund. In: .","din1505-2-1":"Broeker, Timo: bioCONNECT - Wasserstoff und biogenes CO2 im Verbund. In: , 2017","short":"T. Broeker, in: 2017.","chicago":"Broeker, Timo. “bioCONNECT - Wasserstoff und biogenes CO2 im Verbund,” 2017.","apa":"Broeker, T. (2017). bioCONNECT - Wasserstoff und biogenes CO2 im Verbund. Bioenergieforum NRW, EnergieAgentur NRW, , Gelsenkirchen.","bjps":"Broeker T (2017) bioCONNECT - Wasserstoff und biogenes CO2 im Verbund.","mla":"Broeker, Timo. bioCONNECT - Wasserstoff und biogenes CO2 im Verbund. 2017.","havard":"T. Broeker, bioCONNECT - Wasserstoff und biogenes CO2 im Verbund, in: 2017.","ufg":"Broeker, Timo: bioCONNECT - Wasserstoff und biogenes CO2 im Verbund, in: o. Hg.: o. O. 2017.","van":"Broeker T. bioCONNECT - Wasserstoff und biogenes CO2 im Verbund. In 2017.","ieee":"T. Broeker, “bioCONNECT - Wasserstoff und biogenes CO2 im Verbund,” presented at the Bioenergieforum NRW, EnergieAgentur NRW, , Gelsenkirchen, 2017.","ama":"Broeker T. bioCONNECT - Wasserstoff und biogenes CO2 im Verbund. In: ; 2017."},"publication_status":"published","year":"2017","author":[{"id":"43927","last_name":"Broeker","full_name":"Broeker, Timo","first_name":"Timo"}],"conference":{"location":"Gelsenkirchen","name":"Bioenergieforum NRW, EnergieAgentur NRW, "},"department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"status":"public"},{"citation":{"ama":"Broeker T, Hoffarth M, Heikrodt K, Schneider J. Study on the implementation of a biocatalytic power-to-gas reactor in a brewery. In: ; 2017.","ieee":"T. Broeker, M. Hoffarth, K. Heikrodt, and J. Schneider, “Study on the implementation of a biocatalytic power-to-gas reactor in a brewery,” presented at the European Congress of Applied Biotechnology (ECAB 4) & World Congress of Chemical Engineering (WCCE 10), Barcelona/Katalonia, 2017.","short":"T. Broeker, M. Hoffarth, K. Heikrodt, J. Schneider, in: 2017.","din1505-2-1":"Broeker, Timo ; Hoffarth, Marc ; Heikrodt, Klaus ; Schneider, Jan: Study on the implementation of a biocatalytic power-to-gas reactor in a brewery. In: , 2017","chicago-de":"Broeker, Timo, Marc Hoffarth, Klaus Heikrodt und Jan Schneider. 2017. Study on the implementation of a biocatalytic power-to-gas reactor in a brewery. In: .","van":"Broeker T, Hoffarth M, Heikrodt K, Schneider J. Study on the implementation of a biocatalytic power-to-gas reactor in a brewery. In 2017.","ufg":"Broeker, Timo u. a.: Study on the implementation of a biocatalytic power-to-gas reactor in a brewery, in: o. Hg.: o. O. 2017.","havard":"T. Broeker, M. Hoffarth, K. Heikrodt, J. Schneider, Study on the implementation of a biocatalytic power-to-gas reactor in a brewery, in: 2017.","bjps":"Broeker T et al. (2017) Study on the Implementation of a Biocatalytic Power-to-Gas Reactor in a Brewery.","mla":"Broeker, Timo, et al. Study on the Implementation of a Biocatalytic Power-to-Gas Reactor in a Brewery. 2017.","apa":"Broeker, T., Hoffarth, M., Heikrodt, K., & Schneider, J. (2017). Study on the implementation of a biocatalytic power-to-gas reactor in a brewery. European Congress of Applied Biotechnology (ECAB 4) & World Congress of Chemical Engineering (WCCE 10), Barcelona/Katalonia.","chicago":"Broeker, Timo, Marc Hoffarth, Klaus Heikrodt, and Jan Schneider. “Study on the Implementation of a Biocatalytic Power-to-Gas Reactor in a Brewery,” 2017."},"title":"Study on the implementation of a biocatalytic power-to-gas reactor in a brewery","status":"public","author":[{"last_name":"Broeker","id":"43927","first_name":"Timo","full_name":"Broeker, Timo"},{"last_name":"Hoffarth","full_name":"Hoffarth, Marc","id":"52330","first_name":"Marc"},{"first_name":"Klaus","id":"46269","full_name":"Heikrodt, Klaus","last_name":"Heikrodt"},{"first_name":"Jan","full_name":"Schneider, Jan","last_name":"Schneider","id":"13209","orcid":"0000-0001-6401-8873"}],"year":"2017","conference":{"location":"Barcelona/Katalonia","name":"European Congress of Applied Biotechnology (ECAB 4) & World Congress of Chemical Engineering (WCCE 10)","start_date":"2017-10-01","end_date":"2017-10-05"},"department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"user_id":"83779","date_updated":"2024-05-22T15:31:39Z","type":"conference_abstract","date_created":"2021-04-16T12:36:47Z","_id":"5585","language":[{"iso":"eng"}]},{"_id":"573","place":"Lemgo","user_id":"51864","type":"conference","quality_controlled":"1","abstract":[{"lang":"eng","text":"Additive manufacturing (AM) technologies have not only revolutionized product development and design by enabling rapid prototyping. They also gained influence on production in general, mainly because of their direct manufacturing capabilities. In the context of Industry 4.0 and the related process automation, innovative and advanced production technologies with completely new approaches are required [1]. AM technologies contribute to this with their advantages like freedom of design, cost efficient product individualization, and functional integration. On the other hand, AM still shows shortcomings in exploiting its full potential. Most current AM technologies are only applicable for manufacturing with singular materials. In particular, opportunities for processing of optically or electrically conductive materials are still missing. This paper contributes to the advancement of additive manufacturing of two different material variants or even two completely different materials. A special focus is laid on producing a part that combines mechanical with optical or electrical functionalities in one process step. The ultimate goal is to integrate sensor functionalities into an AM object, e.g. strain gauges. Extrusion processes, predominantly Fused Layer Modeling (FLM), are preferred in this research due to their mechanically simple machine setup in which additional functional materials can be adapted easily to the build process. In a first step, the general manufacturability has been evaluated. Thereafter, the resulting optical transmission properties have been analyzed. Especially the attenuation has to remain below a threshold value to accomplish a minimum signal-to-noise ratio."}],"issue":"1","department":[{"_id":"DEP1306"},{"_id":"DEP5020"},{"_id":"DEP5000"},{"_id":"DEP6020"}],"conference":{"start_date":"2017-09-28","end_date":"2017-09-29","name":"Proceedings7th International Conference","location":"Pordenone, Italy"},"publication_status":"published","series_title":"Publication series in direct digital manufacturing ","keyword":["Additive manufacturing","Embedded optical waveguides","Electrical conductors","Embedded systems","FLM technology","Sensors"],"language":[{"iso":"eng"}],"oa":"1","corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"editor":[{"first_name":"Elio","full_name":"Padoano, Elio","last_name":"Padoano"},{"id":"14290","full_name":"Villmer, Franz-Josef","last_name":"Villmer","first_name":"Franz-Josef"}],"related_material":{"link":[{"relation":"contains","url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf"}]},"date_updated":"2024-04-19T12:58:56Z","publication_identifier":{"isbn":["978-3-946856-01-6"]},"publication":"Production Engineering and Management","date_created":"2019-02-18T11:16:07Z","status":"public","page":"127-136","main_file_link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf","open_access":"1"}],"year":"2017","author":[{"last_name":"Ehlert","full_name":"Ehlert, Patrick","first_name":"Patrick","id":"62091"},{"last_name":"Stübbe","id":"51864","first_name":"Oliver","full_name":"Stübbe, Oliver","orcid":"https://orcid.org/0000-0001-7293-6893"},{"id":"14290","full_name":"Villmer, Franz-Josef","last_name":"Villmer","first_name":"Franz-Josef"}],"citation":{"ufg":"Ehlert, Patrick/Stübbe, Oliver/Villmer, Franz-Josef: Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology, in: Padoano, Elio u. a. (Hgg.): Production Engineering and Management, Lemgo 2017 (Publication series in direct digital manufacturing ), S. 127–136.","havard":"P. Ehlert, O. Stübbe, F.-J. Villmer, Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management, Lemgo, 2017: pp. 127–136.","bjps":"Ehlert P, Stübbe O and Villmer F-J (2017) Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology. In Padoano E et al. (eds), Production Engineering and Management. Lemgo, pp. 127–136.","mla":"Ehlert, Patrick, et al. “Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2017, pp. 127–36.","van":"Ehlert P, Stübbe O, Villmer FJ. Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology. In: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, editors. Production Engineering and Management. Lemgo; 2017. p. 127–36. (Publication series in direct digital manufacturing ).","ama":"Ehlert P, Stübbe O, Villmer FJ. Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology. In: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management. Publication series in direct digital manufacturing . ; 2017:127-136.","chicago":"Ehlert, Patrick, Oliver Stübbe, and Franz-Josef Villmer. “Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, Department of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, 127–36. Publication Series in Direct Digital Manufacturing . Lemgo, 2017.","apa":"Ehlert, P., Stübbe, O., & Villmer, F.-J. (2017). Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology. In E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management (Issue 1, pp. 127–136).","ieee":"P. Ehlert, O. Stübbe, and F.-J. Villmer, “Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology,” in Production Engineering and Management, Pordenone, Italy, 2017, no. 1, pp. 127–136.","chicago-de":"Ehlert, Patrick, Oliver Stübbe und Franz-Josef Villmer. 2017. Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, Department of Production Engineering and Management, und Hochschule Ostwestfalen-Lippe, 127–136. Publication series in direct digital manufacturing . Lemgo.","din1505-2-1":"Ehlert, Patrick ; Stübbe, Oliver ; Villmer, Franz-Josef: Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management ; Hochschule Ostwestfalen-Lippe (Hrsg.): Production Engineering and Management, Publication series in direct digital manufacturing . Lemgo, 2017, S. 127–136","short":"P. Ehlert, O. Stübbe, F.-J. Villmer, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management, Lemgo, 2017, pp. 127–136."},"title":"Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology","extern":"1"},{"status":"public","page":"28-31","author":[{"orcid":"0000-0002-8841-9345","last_name":"Cardinali","id":"58462","full_name":"Cardinali, Marcel","first_name":"Marcel"}],"year":2017,"main_file_link":[{"url":"https://www.yumpu.com/de/document/read/63562637/urbanlab-magazin-2017-die-stadt-der-zukunft"}],"citation":{"chicago":"Cardinali, Marcel. “Human Centered Design. Wie Architektur unser Verhalten beeinflusst.” urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 2 (2017): 28–31.","apa":"Cardinali, M. (2017). Human Centered Design. Wie Architektur unser Verhalten beeinflusst. urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, (2), 28–31.","ieee":"M. Cardinali, “Human Centered Design. Wie Architektur unser Verhalten beeinflusst,” urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 2, pp. 28–31, 2017.","ufg":"Cardinali, Marcel (2017): Human Centered Design. Wie Architektur unser Verhalten beeinflusst, in: urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung (2), S. 28–31.","havard":"M. Cardinali, Human Centered Design. Wie Architektur unser Verhalten beeinflusst, urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. (2017) 28–31.","mla":"Cardinali, Marcel. “Human Centered Design. Wie Architektur unser Verhalten beeinflusst.” urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 2, Technische Hochschule Ostwestfalen-Lippe, 2017, pp. 28–31.","bjps":"Cardinali M (2017) Human Centered Design. Wie Architektur unser Verhalten beeinflusst. urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung 28–31.","van":"Cardinali M. Human Centered Design. Wie Architektur unser Verhalten beeinflusst. urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. 2017;(2):28–31.","ama":"Cardinali M. Human Centered Design. Wie Architektur unser Verhalten beeinflusst. urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. 2017;(2):28-31.","chicago-de":"Cardinali, Marcel. 2017. Human Centered Design. Wie Architektur unser Verhalten beeinflusst. urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, Nr. 2: 28–31.","din1505-2-1":"Cardinali, Marcel: Human Centered Design. Wie Architektur unser Verhalten beeinflusst. In: urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. Detmold, Technische Hochschule Ostwestfalen-Lippe (2017), Nr. 2, S. 28–31","short":"M. Cardinali, urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung (2017) 28–31."},"title":"Human Centered Design. Wie Architektur unser Verhalten beeinflusst","language":[{"iso":"ger"}],"oa":"1","date_updated":"2023-03-15T13:50:01Z","file_date_updated":"2021-05-02T11:36:57Z","publication_identifier":{"issn":["2566-8900"]},"publication":"urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung","date_created":"2021-04-30T12:41:51Z","publisher":"Technische Hochschule Ostwestfalen-Lippe","ddc":["050"],"department":[{"_id":"DEP1303"},{"_id":"DEP1055"}],"abstract":[{"lang":"ger","text":"Das Thema Gesundheit wird traditionell eher aus gesundheitswissenschaft- licher und medizinischer Perspektive betrachtet und untersucht. Nun sind es aber Architekten, Stadtplaner und andere planende Disziplinen, die unsere tägliche Lebenswelt formen. Mit dem Ansatz des Human Centered Design, wird diese Verantwortung gewürdigt und Einwirkungen und Auswirkungen der gebauten Umwelt auf den Menschen, auf unsere Gesundheit und auf unser Wohlempfinden aufgezeigt."}],"issue":"2","publication_status":"published","file":[{"file_name":"Human Centered Design-Wie Architektur unsere Verhalten beeinflusst.pdf","content_type":"application/pdf","date_created":"2021-05-02T11:36:57Z","file_size":2828864,"file_id":"5770","date_updated":"2021-05-02T11:36:57Z","creator":"edu-dd0","relation":"main_file","success":1,"access_level":"open_access"}],"place":"Detmold","_id":"5739","has_accepted_license":"1","user_id":"65039","popular_science":"1","type":"journal_article"},{"_id":"5740","language":[{"iso":"ger"}],"place":"Düsseldorf","popular_science":"1","date_updated":"2023-03-15T13:50:01Z","user_id":"45673","type":"journal_article","date_created":"2021-04-30T12:41:52Z","publication":"Ideenbuch Wachstum in Kooperation","publisher":"NRW.BANK","page":"92-95","status":"public","abstract":[{"text":"Zweitveröffentlichung in urbanlab Magazin Regionale Netzwerke, 12–15.","lang":"ger"}],"department":[{"_id":"DEP1303"},{"_id":"DEP1055"}],"main_file_link":[{"url":"https://www.nrwbank.de/export/sites/nrwbank/de/corporate/downloads/wohnraumfoerderung/Ideenbuch-NRWBANK-Studierendenwettbewerb.pdf"}],"year":2017,"author":[{"first_name":"Oliver","full_name":"Hall, Oliver","id":"27136","last_name":"Hall"},{"orcid":"0000-0002-8841-9345","full_name":"Cardinali, Marcel","id":"58462","first_name":"Marcel","last_name":"Cardinali"}],"publication_status":"published","citation":{"ieee":"O. Hall and M. Cardinali, “ Wachstum in Kooperation. Anlass für und Erkenntnisse aus dem NRW.BANK Studierendenwettbewerb.,” Ideenbuch Wachstum in Kooperation, pp. 92–95, 2017.","ama":"Hall O, Cardinali M. Wachstum in Kooperation. Anlass für und Erkenntnisse aus dem NRW.BANK Studierendenwettbewerb. Ideenbuch Wachstum in Kooperation. 2017:92-95.","apa":"Hall, O., & Cardinali, M. (2017). Wachstum in Kooperation. Anlass für und Erkenntnisse aus dem NRW.BANK Studierendenwettbewerb. Ideenbuch Wachstum in Kooperation, 92–95.","chicago":"Hall, Oliver, and Marcel Cardinali. “ Wachstum in Kooperation. Anlass für und Erkenntnisse aus dem NRW.BANK Studierendenwettbewerb.” Ideenbuch Wachstum in Kooperation, 2017, 92–95.","van":"Hall O, Cardinali M. Wachstum in Kooperation. Anlass für und Erkenntnisse aus dem NRW.BANK Studierendenwettbewerb. Ideenbuch Wachstum in Kooperation. 2017;92–5.","ufg":"Hall, Oliver/Cardinali, Marcel (2017): Wachstum in Kooperation. Anlass für und Erkenntnisse aus dem NRW.BANK Studierendenwettbewerb., in: Ideenbuch Wachstum in Kooperation, S. 92–95.","bjps":"Hall O and Cardinali M (2017) Wachstum in Kooperation. Anlass für und Erkenntnisse aus dem NRW.BANK Studierendenwettbewerb. Ideenbuch Wachstum in Kooperation 92–95.","havard":"O. Hall, M. Cardinali, Wachstum in Kooperation. Anlass für und Erkenntnisse aus dem NRW.BANK Studierendenwettbewerb., Ideenbuch Wachstum in Kooperation. (2017) 92–95.","mla":"Hall, Oliver, and Marcel Cardinali. “ Wachstum in Kooperation. Anlass für und Erkenntnisse aus dem NRW.BANK Studierendenwettbewerb.” Ideenbuch Wachstum in Kooperation, NRW.BANK, 2017, pp. 92–95.","short":"O. Hall, M. Cardinali, Ideenbuch Wachstum in Kooperation (2017) 92–95.","din1505-2-1":"Hall, Oliver ; Cardinali, Marcel: Wachstum in Kooperation. Anlass für und Erkenntnisse aus dem NRW.BANK Studierendenwettbewerb. In: Ideenbuch Wachstum in Kooperation. Düsseldorf, NRW.BANK (2017), S. 92–95","chicago-de":"Hall, Oliver und Marcel Cardinali. 2017. Wachstum in Kooperation. Anlass für und Erkenntnisse aus dem NRW.BANK Studierendenwettbewerb. Ideenbuch Wachstum in Kooperation: 92–95."},"title":" Wachstum in Kooperation. Anlass für und Erkenntnisse aus dem NRW.BANK Studierendenwettbewerb."},{"type":"journal_article","date_created":"2021-04-30T12:41:54Z","publication":"urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung","publication_identifier":{"unknown":["2566-8900"]},"popular_science":"1","date_updated":"2023-03-15T13:50:01Z","user_id":"45673","oa":"1","_id":"5741","language":[{"iso":"ger"}],"keyword":["Studentischer Ideenwettbewerb"],"place":"Detmold","title":"Quartier der Zukunft - Wettbewerbsdokumentation","publication_status":"published","citation":{"ama":"Hall O, Cardinali M. Quartier der Zukunft - Wettbewerbsdokumentation. urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. 2017;(2):60-63.","ieee":"O. Hall and M. Cardinali, “Quartier der Zukunft - Wettbewerbsdokumentation,” urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 2, pp. 60–63, 2017.","bjps":"Hall O and Cardinali M (2017) Quartier der Zukunft - Wettbewerbsdokumentation. urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung 60–63.","mla":"Hall, Oliver, and Marcel Cardinali. “Quartier der Zukunft - Wettbewerbsdokumentation.” urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 2, Technische Hochschule Ostwestfalen-Lippe, 2017, pp. 60–63.","havard":"O. Hall, M. Cardinali, Quartier der Zukunft - Wettbewerbsdokumentation, urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. (2017) 60–63.","ufg":"Hall, Oliver/Cardinali, Marcel (2017): Quartier der Zukunft - Wettbewerbsdokumentation, in: urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung (2), S. 60–63.","van":"Hall O, Cardinali M. Quartier der Zukunft - Wettbewerbsdokumentation. urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. 2017;(2):60–3.","chicago":"Hall, Oliver, and Marcel Cardinali. “Quartier der Zukunft - Wettbewerbsdokumentation.” urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 2 (2017): 60–63.","apa":"Hall, O., & Cardinali, M. (2017). Quartier der Zukunft - Wettbewerbsdokumentation. urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, (2), 60–63.","chicago-de":"Hall, Oliver und Marcel Cardinali. 2017. Quartier der Zukunft - Wettbewerbsdokumentation. urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, Nr. 2: 60–63.","din1505-2-1":"Hall, Oliver ; Cardinali, Marcel: Quartier der Zukunft - Wettbewerbsdokumentation. In: urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. Detmold, Technische Hochschule Ostwestfalen-Lippe (2017), Nr. 2, S. 60–63","short":"O. Hall, M. Cardinali, urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung (2017) 60–63."},"issue":"2","department":[{"_id":"DEP1303"},{"_id":"DEP1055"}],"year":2017,"main_file_link":[{"url":"https://www.yumpu.com/de/document/read/63562637/urbanlab-magazin-2017-die-stadt-der-zukunft","open_access":"1"}],"author":[{"first_name":"Oliver","id":"27136","last_name":"Hall","full_name":"Hall, Oliver"},{"full_name":"Cardinali, Marcel","id":"58462","first_name":"Marcel","last_name":"Cardinali","orcid":"0000-0002-8841-9345"}],"publisher":"Technische Hochschule Ostwestfalen-Lippe","page":"60-63","status":"public"},{"file_date_updated":"2021-05-02T11:24:58Z","date_updated":"2023-03-15T13:50:01Z","date_created":"2021-04-30T12:41:55Z","publication_identifier":{"unknown":["2566-8900"]},"publication":"urbanlab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung","language":[{"iso":"ger"}],"keyword":["benachteiligte Quartiere","Sozialraum","Soziale Stadt","Wohnanforderungen"],"oa":"1","citation":{"ama":"Cardinali M. Milieus und ihre Wohnanforderungen. Warum in der Sozialen Stadt wieder mehr gebaut werden muss. urbanlab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. 2017;(2):50-55.","ieee":"M. Cardinali, “Milieus und ihre Wohnanforderungen. Warum in der Sozialen Stadt wieder mehr gebaut werden muss,” urbanlab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 2, pp. 50–55, 2017.","short":"M. Cardinali, urbanlab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung (2017) 50–55.","chicago-de":"Cardinali, Marcel. 2017. Milieus und ihre Wohnanforderungen. Warum in der Sozialen Stadt wieder mehr gebaut werden muss. urbanlab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, Nr. 2: 50–55.","din1505-2-1":"Cardinali, Marcel: Milieus und ihre Wohnanforderungen. Warum in der Sozialen Stadt wieder mehr gebaut werden muss. In: urbanlab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. Detmold, Technische Hochschule Ostwestfalen-Lippe (2017), Nr. 2, S. 50–55","van":"Cardinali M. Milieus und ihre Wohnanforderungen. Warum in der Sozialen Stadt wieder mehr gebaut werden muss. urbanlab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. 2017;(2):50–5.","ufg":"Cardinali, Marcel (2017): Milieus und ihre Wohnanforderungen. Warum in der Sozialen Stadt wieder mehr gebaut werden muss, in: urbanlab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung (2), S. 50–55.","bjps":"Cardinali M (2017) Milieus und ihre Wohnanforderungen. Warum in der Sozialen Stadt wieder mehr gebaut werden muss. urbanlab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung 50–55.","havard":"M. Cardinali, Milieus und ihre Wohnanforderungen. Warum in der Sozialen Stadt wieder mehr gebaut werden muss, urbanlab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. (2017) 50–55.","mla":"Cardinali, Marcel. “Milieus und ihre Wohnanforderungen. Warum in der Sozialen Stadt wieder mehr gebaut werden muss.” urbanlab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 2, Technische Hochschule Ostwestfalen-Lippe, 2017, pp. 50–55.","apa":"Cardinali, M. (2017). Milieus und ihre Wohnanforderungen. Warum in der Sozialen Stadt wieder mehr gebaut werden muss. urbanlab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, (2), 50–55.","chicago":"Cardinali, Marcel. “Milieus und ihre Wohnanforderungen. Warum in der Sozialen Stadt wieder mehr gebaut werden muss.” urbanlab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 2 (2017): 50–55."},"title":"Milieus und ihre Wohnanforderungen. Warum in der Sozialen Stadt wieder mehr gebaut werden muss","page":"50-55","status":"public","year":2017,"main_file_link":[{"open_access":"1","url":"https://www.yumpu.com/de/document/read/63562600/urbanlab-magazin-08-2018-heimat-planen"}],"author":[{"orcid":"0000-0002-8841-9345","first_name":"Marcel","last_name":"Cardinali","full_name":"Cardinali, Marcel","id":"58462"}],"popular_science":"1","user_id":"45673","type":"journal_article","_id":"5742","place":"Detmold","has_accepted_license":"1","publication_status":"published","file":[{"success":1,"access_level":"open_access","date_updated":"2021-05-02T11:24:58Z","relation":"main_file","creator":"edu-dd0","content_type":"application/pdf","file_name":"Milieus und ihre Wohnanforderungen.pdf","date_created":"2021-05-02T11:24:58Z","file_size":1275426,"file_id":"5765"}],"publisher":"Technische Hochschule Ostwestfalen-Lippe","abstract":[{"lang":"ger","text":"Der vorliegende Artikel beleuchtet die Bedeutung von sozial heterogenen Quar- tieren zur Verhinderung von Armutsrepdroduktion. In diesem Zusammenhang werden Unterschiede und Gemeinsamkeiten von Sozialraum und Quartiers- raum bei verschiedenen Gruppen herausgestellt. Daraus folgt, dass insbesonde- re Kinder und Jugendliche von einer heterogenen Quartierszusammensetzung profitieren. Die Analyse der Abläufe und Abhängigkeiten der Problemstellungen im Quartier zeigt schließlich, dass die Interventionspunkte des Programms So- ziale Stadt zwar richtig erkannt wurden, aber allein nicht geeignet sind einen Weg aus der Daueraufgabe Soziale Stadt zu ermöglichen. So zeigt sich, dass es der Ressourcen anderer Milieus bedarf, um die Armutsfalle benachteiligter Quartiere aufzulösen."}],"issue":"2","department":[{"_id":"DEP1303"},{"_id":"DEP1055"}],"ddc":["050"]},{"has_accepted_license":"1","_id":"5743","type":"journal_article","user_id":"45673","popular_science":"1","issue":"3","ddc":["050"],"department":[{"_id":"DEP1303"},{"_id":"DEP1055"}],"publication_status":"published","file":[{"success":1,"access_level":"open_access","date_created":"2021-04-30T15:04:54Z","file_name":"Editorial Stadt der Zukunft.pdf","content_type":"application/pdf","file_size":62725,"file_id":"5754","date_updated":"2021-04-30T15:04:54Z","relation":"main_file","creator":"edu-dd0"}],"oa":"1","language":[{"iso":"ger"}],"publication":"urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung","publication_identifier":{"issn":["2566-8900"]},"date_created":"2021-04-30T12:41:57Z","file_date_updated":"2021-04-30T15:04:54Z","date_updated":"2023-03-15T13:50:01Z","author":[{"last_name":"Cardinali","first_name":"Marcel","full_name":"Cardinali, Marcel","id":"58462","orcid":"0000-0002-8841-9345"},{"full_name":"Hall, Oliver","first_name":"Oliver","last_name":"Hall","id":"27136"}],"main_file_link":[{"open_access":"1","url":"https://www.yumpu.com/de/document/read/63562637/urbanlab-magazin-2017-die-stadt-der-zukunft"}],"year":2017,"status":"public","page":"3","title":"Städte und Regionen verändern sich (Editorial)","citation":{"chicago-de":"Cardinali, Marcel und Oliver Hall. 2017. Städte und Regionen verändern sich (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, Nr. 3: 3.","din1505-2-1":"Cardinali, Marcel ; Hall, Oliver: Städte und Regionen verändern sich (Editorial). In: urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung (2017), Nr. 3, S. 3","short":"M. Cardinali, O. Hall, urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung (2017) 3.","ufg":"Cardinali, Marcel/Hall, Oliver (2017): Städte und Regionen verändern sich (Editorial), in: urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung (3), S. 3.","havard":"M. Cardinali, O. Hall, Städte und Regionen verändern sich (Editorial), urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. (2017) 3.","bjps":"Cardinali M and Hall O (2017) Städte und Regionen verändern sich (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung 3.","mla":"Cardinali, Marcel, and Oliver Hall. “Städte und Regionen verändern sich (Editorial).” urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 3, 2017, p. 3.","van":"Cardinali M, Hall O. Städte und Regionen verändern sich (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. 2017;(3):3.","chicago":"Cardinali, Marcel, and Oliver Hall. “Städte und Regionen verändern sich (Editorial).” urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 3 (2017): 3.","apa":"Cardinali, M., & Hall, O. (2017). Städte und Regionen verändern sich (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, (3), 3.","ama":"Cardinali M, Hall O. Städte und Regionen verändern sich (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. 2017;(3):3.","ieee":"M. Cardinali and O. Hall, “Städte und Regionen verändern sich (Editorial),” urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 3, p. 3, 2017."}},{"citation":{"van":"Cardinali M, Hall O. Die Stadt der Zukunft (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. 2017;(2):3.","mla":"Cardinali, Marcel, and Oliver Hall. “Die Stadt der Zukunft (Editorial).” urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 2, Technische Hochschule Ostwestfalen-Lippe, 2017, p. 3.","bjps":"Cardinali M and Hall O (2017) Die Stadt der Zukunft (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung 3.","havard":"M. Cardinali, O. Hall, Die Stadt der Zukunft (Editorial), urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. (2017) 3.","ufg":"Cardinali, Marcel/Hall, Oliver (2017): Die Stadt der Zukunft (Editorial), in: urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung (2), S. 3.","apa":"Cardinali, M., & Hall, O. (2017). Die Stadt der Zukunft (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, (2), 3.","chicago":"Cardinali, Marcel, and Oliver Hall. “Die Stadt der Zukunft (Editorial).” urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 2 (2017): 3.","short":"M. Cardinali, O. Hall, urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung (2017) 3.","chicago-de":"Cardinali, Marcel und Oliver Hall. 2017. Die Stadt der Zukunft (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, Nr. 2: 3.","din1505-2-1":"Cardinali, Marcel ; Hall, Oliver: Die Stadt der Zukunft (Editorial). In: urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. Detmold, Technische Hochschule Ostwestfalen-Lippe (2017), Nr. 2, S. 3","ama":"Cardinali M, Hall O. Die Stadt der Zukunft (Editorial). urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. 2017;(2):3.","ieee":"M. Cardinali and O. Hall, “Die Stadt der Zukunft (Editorial),” urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 2, p. 3, 2017."},"title":"Die Stadt der Zukunft (Editorial)","page":"3","status":"public","year":2017,"author":[{"first_name":"Marcel","last_name":"Cardinali","id":"58462","full_name":"Cardinali, Marcel","orcid":"0000-0002-8841-9345"},{"last_name":"Hall","id":"27136","full_name":"Hall, Oliver","first_name":"Oliver"}],"main_file_link":[{"url":"https://www.yumpu.com/de/document/read/63562637/urbanlab-magazin-2017-die-stadt-der-zukunft","open_access":"1"}],"date_updated":"2023-03-15T13:50:01Z","file_date_updated":"2021-04-30T14:41:29Z","date_created":"2021-04-30T12:42:08Z","publication_identifier":{"issn":["2566-8900"]},"publication":"urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung","language":[{"iso":"ger"}],"oa":"1","file":[{"file_size":62725,"file_id":"5751","file_name":"Editorial Stadt der Zukunft.pdf","content_type":"application/pdf","date_created":"2021-04-30T14:41:29Z","date_updated":"2021-04-30T14:41:29Z","relation":"main_file","creator":"edu-dd0","success":1,"access_level":"open_access"}],"publication_status":"published","publisher":"Technische Hochschule Ostwestfalen-Lippe","department":[{"_id":"DEP1303"},{"_id":"DEP1055"}],"ddc":["050"],"issue":"2","popular_science":"1","user_id":"45673","type":"journal_article","place":"Detmold","_id":"5750","has_accepted_license":"1"},{"oa":"1","language":[{"iso":"ger"}],"_id":"5774","publication_identifier":{"issn":["2566-8900"]},"publication":"urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung","type":"journal_article","date_created":"2021-05-02T12:11:45Z","user_id":"83781","date_updated":"2024-12-04T13:08:55Z","main_file_link":[{"url":"https://www.yumpu.com/de/document/read/63562637/urbanlab-magazin-2017-die-stadt-der-zukunft","open_access":"1"}],"author":[{"orcid":"0009-0001-8565-8199","full_name":"Häusler, Axel","last_name":"Häusler","id":"61520","first_name":"Axel"},{"full_name":"Volk, Kathrin","id":"22033","first_name":"Kathrin","last_name":"Volk"},{"last_name":"Staubach","full_name":"Staubach, Reiner","id":"22029","first_name":"Reiner"}],"year":"2017","department":[{"_id":"DEP1055"},{"_id":"DEP1025"},{"_id":"DEP1028"}],"issue":"02","status":"public","page":"88-89","publisher":"Hochschule Ostwestfalen-Lippe / Institut für Designstrategien","title":"Die Stadt der Zukunft - Resilienter Lebensraum","citation":{"short":"A. Häusler, K. Volk, R. Staubach, urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung (2017) 88–89.","din1505-2-1":"Häusler, Axel ; Volk, Kathrin ; Staubach, Reiner: Die Stadt der Zukunft - Resilienter Lebensraum. In: urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, Hochschule Ostwestfalen-Lippe / Institut für Designstrategien (2017), Nr. 02, S. 88–89","chicago-de":"Häusler, Axel, Kathrin Volk und Reiner Staubach. 2017. Die Stadt der Zukunft - Resilienter Lebensraum. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, Nr. 02: 88–89.","ama":"Häusler A, Volk K, Staubach R. Die Stadt der Zukunft - Resilienter Lebensraum. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. 2017;(02):88-89.","van":"Häusler A, Volk K, Staubach R. Die Stadt der Zukunft - Resilienter Lebensraum. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. 2017;(02):88–9.","bjps":"Häusler A, Volk K and Staubach R (2017) Die Stadt der Zukunft - Resilienter Lebensraum. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung 88–89.","havard":"A. Häusler, K. Volk, R. Staubach, Die Stadt der Zukunft - Resilienter Lebensraum, urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. (2017) 88–89.","mla":"Häusler, Axel, et al. “Die Stadt der Zukunft - Resilienter Lebensraum.” urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, no. 02, 2017, pp. 88–89.","ufg":"Häusler, Axel/Volk, Kathrin/Staubach, Reiner: Die Stadt der Zukunft - Resilienter Lebensraum, in: urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung (2017), H. 02, S. 88–89.","ieee":"A. Häusler, K. Volk, and R. Staubach, “Die Stadt der Zukunft - Resilienter Lebensraum,” urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, no. 02, pp. 88–89, 2017.","apa":"Häusler, A., Volk, K., & Staubach, R. (2017). Die Stadt der Zukunft - Resilienter Lebensraum. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, 02, 88–89.","chicago":"Häusler, Axel, Kathrin Volk, and Reiner Staubach. “Die Stadt der Zukunft - Resilienter Lebensraum.” urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, no. 02 (2017): 88–89."},"publication_status":"published"},{"corporate_editor":["Hochschule Ostwestfalen-Lippe"],"editor":[{"last_name":"Melenhorst","id":"51438","full_name":"Melenhorst, Michael","first_name":"Michael"},{"first_name":"Uta","full_name":"Pottgiesser, Uta","id":"27166","last_name":"Pottgiesser","orcid":"0000-0002-8594-3168"},{"last_name":"Naumann","full_name":"Naumann, Christine","id":"11346","first_name":"Christine"},{"full_name":"Kellner, Theresa","first_name":"Theresa","last_name":"Kellner","id":"52011"}],"file_date_updated":"2019-05-02T09:45:27Z","date_updated":"2024-03-22T19:10:07Z","publication_identifier":{"isbn":["978-3-939349-27-3"]},"date_created":"2019-04-25T12:25:45Z","language":[{"iso":"eng"}],"oa":"1","citation":{"din1505-2-1":"Melenhorst, M. ; Pottgiesser, U. ; Naumann, C. ; Kellner, T. ; Hochschule Ostwestfalen-Lippe (Hrsg.): Detmold Conference Week 2017. Lemgo, 2017","chicago-de":"Melenhorst, Michael, Uta Pottgiesser, Christine Naumann, Theresa Kellner, und Hochschule Ostwestfalen-Lippe, Hrsg. 2017. Detmold Conference Week 2017. Lemgo. doi:10.25644/5sg5-zf09, .","short":"M. Melenhorst, U. Pottgiesser, C. Naumann, T. Kellner, Hochschule Ostwestfalen-Lippe, eds., Detmold Conference Week 2017, Lemgo, 2017.","havard":"M. Melenhorst, U. Pottgiesser, C. Naumann, T. Kellner, Hochschule Ostwestfalen-Lippe, eds., Detmold Conference Week 2017, Lemgo, 2017.","bjps":"Melenhorst M et al. (eds) (2017) Detmold Conference Week 2017. Lemgo.","mla":"Melenhorst, Michael, et al., editors. Detmold Conference Week 2017. 2017, p. 349, https://doi.org/10.25644/5sg5-zf09.","ufg":"Melenhorst, Michael u. a.: Detmold Conference Week 2017, Lemgo 2017.","ama":"Melenhorst M, Pottgiesser U, Naumann C, Kellner T, Hochschule Ostwestfalen-Lippe, eds. Detmold Conference Week 2017.; 2017:349. doi:10.25644/5sg5-zf09","van":"Melenhorst M, Pottgiesser U, Naumann C, Kellner T, Hochschule Ostwestfalen-Lippe, editors. Detmold Conference Week 2017. Lemgo; 2017.","chicago":"Melenhorst, Michael, Uta Pottgiesser, Christine Naumann, Theresa Kellner, and Hochschule Ostwestfalen-Lippe, eds. Detmold Conference Week 2017. Lemgo, 2017. https://doi.org/10.25644/5sg5-zf09.","ieee":"M. Melenhorst, U. Pottgiesser, C. Naumann, T. Kellner, and Hochschule Ostwestfalen-Lippe, Eds., Detmold Conference Week 2017. Lemgo, 2017, p. 349. doi: 10.25644/5sg5-zf09.","apa":"Melenhorst, M., Pottgiesser, U., Naumann, C., Kellner, T., & Hochschule Ostwestfalen-Lippe (Eds.). (2017). Detmold Conference Week 2017 (p. 349). https://doi.org/10.25644/5sg5-zf09"},"title":"Detmold Conference Week 2017","status":"public","page":"349","year":"2017","user_id":"83781","type":"conference_editor","_id":"1102","doi":"10.25644/5sg5-zf09","place":"Lemgo","has_accepted_license":"1","file":[{"access_level":"open_access","success":1,"file_id":"1104","file_size":35964456,"content_type":"application/pdf","date_created":"2019-05-02T09:45:27Z","file_name":"1st_RMB-Conference_2017_komprimiert.pdf","relation":"main_file","creator":"hka-zn8","date_updated":"2019-05-02T09:45:27Z"}],"publication_status":"published","abstract":[{"lang":"eng","text":"Since 2000 (in the beginning 21st Century) climate change and globalisation have influenced the actual\r\nworld and all societies tremendously and the have also affected the way we are building. Safety and\r\nsecurity requirements are increasing and are consequently influencing the design of the building envelope.\r\n‘Resilience’ describes the function and ability of buildings and their facades to to recover from or adjust\r\neasily to change. “Resilience” addresses the impacts of climate change and globalization and of safety and security requirements on the building envelope. The first edition of the Detmold Conference Week 2017 connects education and research, scholars and professionals in different events and formats: a master workshop and two conferences will discuss the approaches of resilient design and construction for buildings and facades.\r\nThe direct way to specific stresses forced by water, wind, fire, explosion or earthquake but also in an indirect way seen as a general ability of adaptivity to different changes will be discussed at the facade2017 conference on Friday 24th November 2017 from different academic and professional perspectives.\r\nThe 1st RMB Conference on Thursday 23rd November 2017 is organized by the consortium of the ERASMUS+ \r\nproject “RMB: Reuse of Modernist Buildings. Design Tools for Sustainable Transformations”. There representatives of the consortium as well as international guest will debate in particular issues of Resilience of Modern Movement Buildings and Neighborhoods. During the conference we will discuss new design and educational concepts for the reuse of modern postwar buildings for housing and other purposes – resilience through reuse. Scholars, PhD and master students present and discuss selected papers and posters."}],"ddc":["720"],"department":[{"_id":"DEP1000"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"conference":{"name":"RMB Conference 2017, facade2017, ConstructionLab // Annual Report 2015-17","location":"Detmold","end_date":"2017-11-24","start_date":"2017-11-23"}},{"citation":{"ieee":"A. Bunte, P. Li, and O. Niggemann, “Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems,” in 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS), 2017.","apa":"Bunte, A., Li, P., & Niggemann, O. (2017). Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems. In 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS).","chicago":"Bunte, Andreas, Peng Li, and Oliver Niggemann. “Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems.” In 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS), 2017.","ama":"Bunte A, Li P, Niggemann O. Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems. In: 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS). ; 2017.","van":"Bunte A, Li P, Niggemann O. Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems. In: 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 40 (ML4CPS). 2017.","mla":"Bunte, Andreas, et al. “Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems.” 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS), 2017.","havard":"A. Bunte, P. Li, O. Niggemann, Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems, in: 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS), 2017.","bjps":"Bunte A, Li P and Niggemann O (2017) Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems. 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS).","ufg":"Bunte, Andreas et. al. (2017): Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems, in: 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS).","short":"A. Bunte, P. Li, O. Niggemann, in: 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS), 2017.","din1505-2-1":"Bunte, Andreas ; Li, Peng ; Niggemann, Oliver: Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems. In: 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS), 2017","chicago-de":"Bunte, Andreas, Peng Li und Oliver Niggemann. 2017. Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems. In: 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS)."},"title":"Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems","status":"public","author":[{"full_name":"Bunte, Andreas","id":"58885","last_name":"Bunte","first_name":"Andreas"},{"last_name":"Li","full_name":"Li, Peng","id":"58937","first_name":"Peng"},{"first_name":"Oliver","full_name":"Niggemann, Oliver","last_name":"Niggemann","id":"10876"}],"year":2017,"department":[{"_id":"DEP5023"}],"user_id":"68554","date_updated":"2023-03-15T13:49:55Z","publication":"3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS)","type":"conference","date_created":"2021-02-02T08:24:27Z","_id":"4789","language":[{"iso":"eng"}]},{"citation":{"mla":"Borcherding, Holger, et al. Intelligente Antriebs- und Steuerungstechnik für die energieeffiziente Intralogistik. TIB Hannover, 2017.","bjps":"Borcherding H et al. (2017) Intelligente Antriebs- und Steuerungstechnik für die energieeffiziente Intralogistik. Lemgo: TIB Hannover.","havard":"H. Borcherding, J. Austermann, R. Otte, S. Windmann, M. Köster, H. Stichweh, V. Grabs, M. Ehlich, T. Hohnsbein, Intelligente Antriebs- und Steuerungstechnik für die energieeffiziente Intralogistik, TIB Hannover, Lemgo, 2017.","ufg":"Borcherding, Holger et. al. (2017): Intelligente Antriebs- und Steuerungstechnik für die energieeffiziente Intralogistik, Lemgo.","van":"Borcherding H, Austermann J, Otte R, Windmann S, Köster M, Stichweh H, et al. Intelligente Antriebs- und Steuerungstechnik für die energieeffiziente Intralogistik. Lemgo: TIB Hannover; 2017.","chicago":"Borcherding, Holger, Johann Austermann, Raphael Otte, Stefan Windmann, Markus Köster, Heiko Stichweh, Volker Grabs, Martin Ehlich, and Thorsten Hohnsbein. Intelligente Antriebs- und Steuerungstechnik für die energieeffiziente Intralogistik. Lemgo: TIB Hannover, 2017.","apa":"Borcherding, H., Austermann, J., Otte, R., Windmann, S., Köster, M., Stichweh, H., … Hohnsbein, T. (2017). Intelligente Antriebs- und Steuerungstechnik für die energieeffiziente Intralogistik. Lemgo: TIB Hannover.","chicago-de":"Borcherding, Holger, Johann Austermann, Raphael Otte, Stefan Windmann, Markus Köster, Heiko Stichweh, Volker Grabs, Martin Ehlich und Thorsten Hohnsbein. 2017. Intelligente Antriebs- und Steuerungstechnik für die energieeffiziente Intralogistik. Lemgo: TIB Hannover.","din1505-2-1":"Borcherding, Holger ; Austermann, Johann ; Otte, Raphael ; Windmann, Stefan ; Köster, Markus ; Stichweh, Heiko ; Grabs, Volker ; Ehlich, Martin ; u. a.: Intelligente Antriebs- und Steuerungstechnik für die energieeffiziente Intralogistik. Lemgo : TIB Hannover, 2017","short":"H. Borcherding, J. Austermann, R. Otte, S. Windmann, M. Köster, H. Stichweh, V. Grabs, M. Ehlich, T. Hohnsbein, Intelligente Antriebs- und Steuerungstechnik für die energieeffiziente Intralogistik, TIB Hannover, Lemgo, 2017.","ama":"Borcherding H, Austermann J, Otte R, et al. Intelligente Antriebs- und Steuerungstechnik für die energieeffiziente Intralogistik. Lemgo: TIB Hannover; 2017.","ieee":"H. Borcherding et al., Intelligente Antriebs- und Steuerungstechnik für die energieeffiziente Intralogistik. Lemgo: TIB Hannover, 2017."},"title":"Intelligente Antriebs- und Steuerungstechnik für die energieeffiziente Intralogistik","publisher":"TIB Hannover","status":"public","year":2017,"author":[{"id":"1693","last_name":"Borcherding","full_name":"Borcherding, Holger","first_name":"Holger"},{"id":"42114","full_name":"Austermann, Johann","first_name":"Johann","last_name":"Austermann"},{"id":"51830","first_name":"Raphael","full_name":"Otte, Raphael","last_name":"Otte"},{"full_name":"Windmann, Stefan","last_name":"Windmann","id":"58525","first_name":"Stefan"},{"first_name":"Markus","last_name":"Köster","full_name":"Köster, Markus"},{"full_name":"Stichweh, Heiko","last_name":"Stichweh","first_name":"Heiko"},{"full_name":"Grabs, Volker","last_name":"Grabs","first_name":"Volker"},{"first_name":"Martin","last_name":"Ehlich","full_name":"Ehlich, Martin"},{"first_name":"Thorsten","full_name":"Hohnsbein, Thorsten","last_name":"Hohnsbein"}],"department":[{"_id":"DEP6020"}],"user_id":"74004","date_updated":"2023-03-15T13:49:56Z","report_number":"FKZ 02PQ2140","date_created":"2021-02-08T13:10:43Z","type":"report_science","_id":"4906","place":"Lemgo","language":[{"iso":"ger"}],"alternative_title":["Verbundabschlussbericht zum Innovationsprojekt \"itsowl-IASI\""]},{"author":[{"first_name":"Holger","last_name":"Borcherding","full_name":"Borcherding, Holger","id":"1693"},{"id":"62157","last_name":"Jerwan","full_name":"Jerwan, Benjamin","first_name":"Benjamin"}],"year":2017,"department":[{"_id":"DEP6020"}],"status":"public","publisher":"TIB Hannover","title":"Abschlussbericht zum Projekt MintEA, Miniaturisierung und Hochintegration von Elektronik in Energie- und Antriebstechnik","citation":{"chicago":"Borcherding, Holger, and Benjamin Jerwan. Abschlussbericht Zum Projekt MintEA, Miniaturisierung Und Hochintegration von Elektronik in Energie- Und Antriebstechnik. Lemgo: TIB Hannover, 2017.","apa":"Borcherding, H., & Jerwan, B. (2017). Abschlussbericht zum Projekt MintEA, Miniaturisierung und Hochintegration von Elektronik in Energie- und Antriebstechnik. Lemgo: TIB Hannover.","havard":"H. Borcherding, B. Jerwan, Abschlussbericht zum Projekt MintEA, Miniaturisierung und Hochintegration von Elektronik in Energie- und Antriebstechnik, TIB Hannover, Lemgo, 2017.","bjps":"Borcherding H and Jerwan B (2017) Abschlussbericht Zum Projekt MintEA, Miniaturisierung Und Hochintegration von Elektronik in Energie- Und Antriebstechnik. Lemgo: TIB Hannover.","mla":"Borcherding, Holger, and Benjamin Jerwan. Abschlussbericht Zum Projekt MintEA, Miniaturisierung Und Hochintegration von Elektronik in Energie- Und Antriebstechnik. TIB Hannover, 2017.","ufg":"Borcherding, Holger/Jerwan, Benjamin (2017): Abschlussbericht zum Projekt MintEA, Miniaturisierung und Hochintegration von Elektronik in Energie- und Antriebstechnik, Lemgo.","van":"Borcherding H, Jerwan B. Abschlussbericht zum Projekt MintEA, Miniaturisierung und Hochintegration von Elektronik in Energie- und Antriebstechnik. Lemgo: TIB Hannover; 2017.","chicago-de":"Borcherding, Holger und Benjamin Jerwan. 2017. Abschlussbericht zum Projekt MintEA, Miniaturisierung und Hochintegration von Elektronik in Energie- und Antriebstechnik. Lemgo: TIB Hannover.","din1505-2-1":"Borcherding, Holger ; Jerwan, Benjamin: Abschlussbericht zum Projekt MintEA, Miniaturisierung und Hochintegration von Elektronik in Energie- und Antriebstechnik. Lemgo : TIB Hannover, 2017","short":"H. Borcherding, B. Jerwan, Abschlussbericht Zum Projekt MintEA, Miniaturisierung Und Hochintegration von Elektronik in Energie- Und Antriebstechnik, TIB Hannover, Lemgo, 2017.","ieee":"H. Borcherding and B. Jerwan, Abschlussbericht zum Projekt MintEA, Miniaturisierung und Hochintegration von Elektronik in Energie- und Antriebstechnik. Lemgo: TIB Hannover, 2017.","ama":"Borcherding H, Jerwan B. Abschlussbericht Zum Projekt MintEA, Miniaturisierung Und Hochintegration von Elektronik in Energie- Und Antriebstechnik. Lemgo: TIB Hannover; 2017."},"place":"Lemgo","language":[{"iso":"eng"}],"_id":"4907","date_created":"2021-02-08T13:12:38Z","type":"report_science","report_number":"FKZ 13FH011IN4","user_id":"64800","date_updated":"2023-03-15T13:49:56Z"},{"title":"Schlussbericht zum Verbundprojekt itsowl-HERA : Hochintegrierter Elektronikmotor mit rotierender Antriebselektronik (itsowl-HERA)","citation":{"short":"H. Borcherding, D. Steup, M. Therolf, A. Tolksdorf, Schlussbericht zum Verbundprojekt itsowl-HERA : Hochintegrierter Elektronikmotor mit rotierender Antriebselektronik (itsowl-HERA), TIB Hannover, Lemgo, 2017.","chicago-de":"Borcherding, Holger, D. Steup, M. Therolf und A. Tolksdorf. 2017. Schlussbericht zum Verbundprojekt itsowl-HERA : Hochintegrierter Elektronikmotor mit rotierender Antriebselektronik (itsowl-HERA). Lemgo: TIB Hannover.","din1505-2-1":"Borcherding, Holger ; Steup, D. ; Therolf, M. ; Tolksdorf, A.: Schlussbericht zum Verbundprojekt itsowl-HERA : Hochintegrierter Elektronikmotor mit rotierender Antriebselektronik (itsowl-HERA). Lemgo : TIB Hannover, 2017","apa":"Borcherding, H., Steup, D., Therolf, M., & Tolksdorf, A. (2017). Schlussbericht zum Verbundprojekt itsowl-HERA : Hochintegrierter Elektronikmotor mit rotierender Antriebselektronik (itsowl-HERA). Lemgo: TIB Hannover.","ieee":"H. Borcherding, D. Steup, M. Therolf, and A. Tolksdorf, Schlussbericht zum Verbundprojekt itsowl-HERA : Hochintegrierter Elektronikmotor mit rotierender Antriebselektronik (itsowl-HERA). Lemgo: TIB Hannover, 2017.","chicago":"Borcherding, Holger, D. Steup, M. Therolf, and A. Tolksdorf. Schlussbericht zum Verbundprojekt itsowl-HERA : Hochintegrierter Elektronikmotor mit rotierender Antriebselektronik (itsowl-HERA). Lemgo: TIB Hannover, 2017.","van":"Borcherding H, Steup D, Therolf M, Tolksdorf A. Schlussbericht zum Verbundprojekt itsowl-HERA : Hochintegrierter Elektronikmotor mit rotierender Antriebselektronik (itsowl-HERA). Lemgo: TIB Hannover; 2017.","ama":"Borcherding H, Steup D, Therolf M, Tolksdorf A. Schlussbericht zum Verbundprojekt itsowl-HERA : Hochintegrierter Elektronikmotor mit rotierender Antriebselektronik (itsowl-HERA). Lemgo: TIB Hannover; 2017.","ufg":"Borcherding, Holger et. al. (2017): Schlussbericht zum Verbundprojekt itsowl-HERA : Hochintegrierter Elektronikmotor mit rotierender Antriebselektronik (itsowl-HERA), Lemgo.","havard":"H. Borcherding, D. Steup, M. Therolf, A. Tolksdorf, Schlussbericht zum Verbundprojekt itsowl-HERA : Hochintegrierter Elektronikmotor mit rotierender Antriebselektronik (itsowl-HERA), TIB Hannover, Lemgo, 2017.","bjps":"Borcherding H et al. (2017) Schlussbericht zum Verbundprojekt itsowl-HERA : Hochintegrierter Elektronikmotor mit rotierender Antriebselektronik (itsowl-HERA). Lemgo: TIB Hannover.","mla":"Borcherding, Holger, et al. Schlussbericht zum Verbundprojekt itsowl-HERA : Hochintegrierter Elektronikmotor mit rotierender Antriebselektronik (itsowl-HERA). TIB Hannover, 2017."},"department":[{"_id":"DEP6020"}],"author":[{"first_name":"Holger","full_name":"Borcherding, Holger","id":"1693","last_name":"Borcherding"},{"last_name":"Steup","full_name":"Steup, D.","first_name":"D."},{"last_name":"Therolf","first_name":"M.","full_name":"Therolf, M."},{"last_name":"Tolksdorf","first_name":"A.","full_name":"Tolksdorf, A."}],"year":2017,"publisher":"TIB Hannover","status":"public","type":"report_science","date_created":"2021-02-09T09:12:46Z","date_updated":"2023-03-15T13:49:56Z","user_id":"74004","_id":"4915","language":[{"iso":"ger"}],"place":"Lemgo"},{"citation":{"short":"J. Wettlaufer, H. Borcherding, T. Hohnsbein, InSeL - Inhärent Störungsarme Leistungselektronik : BMBF-Verbundprojekt : Abschlussbericht : Titel des Teilvorhabens: “Integration der störungsarmen Leistungselektronik in Industrieumrichter,” TIB Hannover, Lemgo, 2017.","chicago-de":"Wettlaufer, Jan, Holger Borcherding und Thorsten Hohnsbein. 2017. InSeL - Inhärent Störungsarme Leistungselektronik : BMBF-Verbundprojekt : Abschlussbericht : Titel des Teilvorhabens: „Integration der störungsarmen Leistungselektronik in Industrieumrichter“. Lemgo: TIB Hannover.","din1505-2-1":"Wettlaufer, Jan ; Borcherding, Holger ; Hohnsbein, Thorsten: InSeL - Inhärent Störungsarme Leistungselektronik : BMBF-Verbundprojekt : Abschlussbericht : Titel des Teilvorhabens: „Integration der störungsarmen Leistungselektronik in Industrieumrichter“. Lemgo : TIB Hannover, 2017","van":"Wettlaufer J, Borcherding H, Hohnsbein T. InSeL - Inhärent Störungsarme Leistungselektronik : BMBF-Verbundprojekt : Abschlussbericht : Titel des Teilvorhabens: “Integration der störungsarmen Leistungselektronik in Industrieumrichter.” Lemgo: TIB Hannover; 2017.","ama":"Wettlaufer J, Borcherding H, Hohnsbein T. InSeL - Inhärent Störungsarme Leistungselektronik : BMBF-Verbundprojekt : Abschlussbericht : Titel des Teilvorhabens: “Integration der störungsarmen Leistungselektronik in Industrieumrichter.” Lemgo: TIB Hannover; 2017.","ufg":"Wettlaufer, Jan et. al. (2017): InSeL - Inhärent Störungsarme Leistungselektronik : BMBF-Verbundprojekt : Abschlussbericht : Titel des Teilvorhabens: „Integration der störungsarmen Leistungselektronik in Industrieumrichter“, Lemgo.","mla":"Wettlaufer, Jan, et al. InSeL - Inhärent Störungsarme Leistungselektronik : BMBF-Verbundprojekt : Abschlussbericht : Titel des Teilvorhabens: “Integration der störungsarmen Leistungselektronik in Industrieumrichter.” TIB Hannover, 2017.","havard":"J. Wettlaufer, H. Borcherding, T. Hohnsbein, InSeL - Inhärent Störungsarme Leistungselektronik : BMBF-Verbundprojekt : Abschlussbericht : Titel des Teilvorhabens: “Integration der störungsarmen Leistungselektronik in Industrieumrichter,” TIB Hannover, Lemgo, 2017.","bjps":"Wettlaufer J, Borcherding H and Hohnsbein T (2017) InSeL - Inhärent Störungsarme Leistungselektronik : BMBF-Verbundprojekt : Abschlussbericht : Titel des Teilvorhabens: ‘Integration der störungsarmen Leistungselektronik in Industrieumrichter’. Lemgo: TIB Hannover.","apa":"Wettlaufer, J., Borcherding, H., & Hohnsbein, T. (2017). InSeL - Inhärent Störungsarme Leistungselektronik : BMBF-Verbundprojekt : Abschlussbericht : Titel des Teilvorhabens: “Integration der störungsarmen Leistungselektronik in Industrieumrichter.” Lemgo: TIB Hannover.","ieee":"J. Wettlaufer, H. Borcherding, and T. Hohnsbein, InSeL - Inhärent Störungsarme Leistungselektronik : BMBF-Verbundprojekt : Abschlussbericht : Titel des Teilvorhabens: “Integration der störungsarmen Leistungselektronik in Industrieumrichter.” Lemgo: TIB Hannover, 2017.","chicago":"Wettlaufer, Jan, Holger Borcherding, and Thorsten Hohnsbein. InSeL - Inhärent Störungsarme Leistungselektronik : BMBF-Verbundprojekt : Abschlussbericht : Titel des Teilvorhabens: “Integration der störungsarmen Leistungselektronik in Industrieumrichter.” Lemgo: TIB Hannover, 2017."},"title":"InSeL - Inhärent Störungsarme Leistungselektronik : BMBF-Verbundprojekt : Abschlussbericht : Titel des Teilvorhabens: \"Integration der störungsarmen Leistungselektronik in Industrieumrichter\"","publisher":"TIB Hannover","status":"public","department":[{"_id":"DEP6020"}],"author":[{"last_name":"Wettlaufer","full_name":"Wettlaufer, Jan","first_name":"Jan"},{"full_name":"Borcherding, Holger","first_name":"Holger","id":"1693","last_name":"Borcherding"},{"full_name":"Hohnsbein, Thorsten","last_name":"Hohnsbein","first_name":"Thorsten"}],"year":2017,"date_updated":"2023-03-15T13:49:56Z","user_id":"74004","report_number":"Reportnr. 16EMO0033, 01150513","date_created":"2021-02-09T09:15:29Z","type":"report_science","_id":"4916","language":[{"iso":"ger"}],"place":"Lemgo"},{"citation":{"ama":"Bolte S, Cherkerzova R, Kaiser M, et al. Schlussbericht Zum Verbundprojekt: Energieeffizienz in Intelligenten Technischen Systemen (Itsowl-EE) : Der Universität Paderborn, Hochschule OWL, Lemgo, Fraunhofer Lemgo, Universität Bielefeld. Lemgo: TIB Hannover; 2017.","ieee":"S. Bolte et al., Schlussbericht zum Verbundprojekt: Energieeffizienz in intelligenten technischen Systemen (itsowl-EE) : der Universität Paderborn, Hochschule OWL, Lemgo, Fraunhofer Lemgo, Universität Bielefeld. Lemgo: TIB Hannover, 2017.","van":"Bolte S, Cherkerzova R, Kaiser M, Peters A, Spanier P, Böcker J, et al. Schlussbericht zum Verbundprojekt: Energieeffizienz in intelligenten technischen Systemen (itsowl-EE) : der Universität Paderborn, Hochschule OWL, Lemgo, Fraunhofer Lemgo, Universität Bielefeld. Lemgo: TIB Hannover; 2017.","mla":"Bolte, S., et al. Schlussbericht Zum Verbundprojekt: Energieeffizienz in Intelligenten Technischen Systemen (Itsowl-EE) : Der Universität Paderborn, Hochschule OWL, Lemgo, Fraunhofer Lemgo, Universität Bielefeld. TIB Hannover, 2017.","bjps":"Bolte S et al. (2017) Schlussbericht Zum Verbundprojekt: Energieeffizienz in Intelligenten Technischen Systemen (Itsowl-EE) : Der Universität Paderborn, Hochschule OWL, Lemgo, Fraunhofer Lemgo, Universität Bielefeld. Lemgo: TIB Hannover.","havard":"S. Bolte, R. Cherkerzova, M. Kaiser, A. Peters, P. Spanier, J. Böcker, H. Borcherding, Schlussbericht zum Verbundprojekt: Energieeffizienz in intelligenten technischen Systemen (itsowl-EE) : der Universität Paderborn, Hochschule OWL, Lemgo, Fraunhofer Lemgo, Universität Bielefeld, TIB Hannover, Lemgo, 2017.","ufg":"Bolte, S. et. al. (2017): Schlussbericht zum Verbundprojekt: Energieeffizienz in intelligenten technischen Systemen (itsowl-EE) : der Universität Paderborn, Hochschule OWL, Lemgo, Fraunhofer Lemgo, Universität Bielefeld, Lemgo.","apa":"Bolte, S., Cherkerzova, R., Kaiser, M., Peters, A., Spanier, P., Böcker, J., & Borcherding, H. (2017). Schlussbericht zum Verbundprojekt: Energieeffizienz in intelligenten technischen Systemen (itsowl-EE) : der Universität Paderborn, Hochschule OWL, Lemgo, Fraunhofer Lemgo, Universität Bielefeld. Lemgo: TIB Hannover.","chicago":"Bolte, S., R. Cherkerzova, Mario Kaiser, A. Peters, Patrick Spanier, J. Böcker, and Holger Borcherding. Schlussbericht Zum Verbundprojekt: Energieeffizienz in Intelligenten Technischen Systemen (Itsowl-EE) : Der Universität Paderborn, Hochschule OWL, Lemgo, Fraunhofer Lemgo, Universität Bielefeld. Lemgo: TIB Hannover, 2017.","short":"S. Bolte, R. Cherkerzova, M. Kaiser, A. Peters, P. Spanier, J. Böcker, H. Borcherding, Schlussbericht Zum Verbundprojekt: Energieeffizienz in Intelligenten Technischen Systemen (Itsowl-EE) : Der Universität Paderborn, Hochschule OWL, Lemgo, Fraunhofer Lemgo, Universität Bielefeld, TIB Hannover, Lemgo, 2017.","din1505-2-1":"Bolte, S. ; Cherkerzova, R. ; Kaiser, Mario ; Peters, A. ; Spanier, Patrick ; Böcker, J. ; Borcherding, Holger: Schlussbericht zum Verbundprojekt: Energieeffizienz in intelligenten technischen Systemen (itsowl-EE) : der Universität Paderborn, Hochschule OWL, Lemgo, Fraunhofer Lemgo, Universität Bielefeld. Lemgo : TIB Hannover, 2017","chicago-de":"Bolte, S., R. Cherkerzova, Mario Kaiser, A. Peters, Patrick Spanier, J. Böcker und Holger Borcherding. 2017. Schlussbericht zum Verbundprojekt: Energieeffizienz in intelligenten technischen Systemen (itsowl-EE) : der Universität Paderborn, Hochschule OWL, Lemgo, Fraunhofer Lemgo, Universität Bielefeld. Lemgo: TIB Hannover."},"title":"Schlussbericht zum Verbundprojekt: Energieeffizienz in intelligenten technischen Systemen (itsowl-EE) : der Universität Paderborn, Hochschule OWL, Lemgo, Fraunhofer Lemgo, Universität Bielefeld","status":"public","publisher":"TIB Hannover","department":[{"_id":"DEP6020"}],"author":[{"last_name":"Bolte","full_name":"Bolte, S.","first_name":"S."},{"full_name":"Cherkerzova, R. ","first_name":"R. ","last_name":"Cherkerzova"},{"id":"73362","last_name":"Kaiser","full_name":"Kaiser, Mario","first_name":"Mario"},{"full_name":"Peters, A. ","first_name":"A. ","last_name":"Peters"},{"last_name":"Spanier","first_name":"Patrick","id":"43516","full_name":"Spanier, Patrick"},{"last_name":"Böcker","first_name":"J.","full_name":"Böcker, J."},{"id":"1693","first_name":"Holger","last_name":"Borcherding","full_name":"Borcherding, Holger"}],"year":2017,"date_updated":"2023-03-15T13:49:56Z","user_id":"74004","type":"report_science","date_created":"2021-02-09T09:19:50Z","report_number":"FKZ. 02PQ1030-02PQ1033","language":[{"iso":"eng"}],"place":"Lemgo","_id":"4917"},{"date_updated":"2023-03-15T13:49:58Z","user_id":"45673","type":"conference","date_created":"2021-03-03T13:46:23Z","publication_identifier":{"isbn":["978-0-9928957-5-4"]},"publication":"Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit.]; et al.","language":[{"iso":"eng"}],"_id":"5192","publication_status":"published","citation":{"ieee":"U. Pottgiesser and C. Kirch, “Developing sound absorbers for health facilities : how to meet hygienic and acoustic requirements in one product,” in Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit.]; et al., Edinburgh, Scotland, 2017, pp. 4771–4778.","ama":"Pottgiesser U, Kirch C. Developing sound absorbers for health facilities : how to meet hygienic and acoustic requirements in one product. In: Design to Thrive: PLEA 2017 : Proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [Edit.]; et Al. ; 2017:4771-4778.","din1505-2-1":"Pottgiesser, Uta ; Kirch, Christoph: Developing sound absorbers for health facilities : how to meet hygienic and acoustic requirements in one product. In: Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit.]; et al., 2017, S. 4771–4778","chicago-de":"Pottgiesser, Uta und Christoph Kirch. 2017. Developing sound absorbers for health facilities : how to meet hygienic and acoustic requirements in one product. In: Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit.]; et al., 4771–4778.","short":"U. Pottgiesser, C. Kirch, in: Design to Thrive: PLEA 2017 : Proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [Edit.]; et Al., 2017, pp. 4771–4778.","chicago":"Pottgiesser, Uta, and Christoph Kirch. “Developing Sound Absorbers for Health Facilities : How to Meet Hygienic and Acoustic Requirements in One Product.” In Design to Thrive: PLEA 2017 : Proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [Edit.]; et Al., 4771–78, 2017.","apa":"Pottgiesser, U., & Kirch, C. (2017). Developing sound absorbers for health facilities : how to meet hygienic and acoustic requirements in one product. In Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit.]; et al. (pp. 4771–4778). Edinburgh, Scotland.","mla":"Pottgiesser, Uta, and Christoph Kirch. “Developing Sound Absorbers for Health Facilities : How to Meet Hygienic and Acoustic Requirements in One Product.” Design to Thrive: PLEA 2017 : Proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [Edit.]; et Al., 2017, pp. 4771–78.","havard":"U. Pottgiesser, C. Kirch, Developing sound absorbers for health facilities : how to meet hygienic and acoustic requirements in one product, in: Design to Thrive: PLEA 2017 : Proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [Edit.]; et Al., 2017: pp. 4771–4778.","bjps":"Pottgiesser U and Kirch C (2017) Developing Sound Absorbers for Health Facilities : How to Meet Hygienic and Acoustic Requirements in One Product. Design to Thrive: PLEA 2017 : Proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [Edit.]; et Al. pp. 4771–4778.","ufg":"Pottgiesser, Uta/Kirch, Christoph (2017): Developing sound absorbers for health facilities : how to meet hygienic and acoustic requirements in one product, in: Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit.]; et al., S. 4771–4778.","van":"Pottgiesser U, Kirch C. Developing sound absorbers for health facilities : how to meet hygienic and acoustic requirements in one product. In: Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit]; et al. 2017. p. 4771–8."},"title":"Developing sound absorbers for health facilities : how to meet hygienic and acoustic requirements in one product","page":"4771-4778","status":"public","quality_controlled":"1","department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"conference":{"location":"Edinburgh, Scotland","name":"33rd PLEA International Conference : Design to Thrive","start_date":"2017-07-02","end_date":"2017-07-05"},"main_file_link":[{"url":"https://repository.uantwerpen.be/docman/iruaauth/3b0129/147552.pdf"}],"author":[{"orcid":"0000-0002-8594-3168","full_name":"Pottgiesser, Uta","last_name":"Pottgiesser","id":"27166","first_name":"Uta"},{"first_name":"Christoph","last_name":"Kirch","full_name":"Kirch, Christoph"}],"year":2017},{"_id":"5196","language":[{"iso":"eng"}],"date_updated":"2023-03-15T13:49:58Z","user_id":"45673","date_created":"2021-03-03T13:46:23Z","type":"conference","publication_identifier":{"isbn":["978-0-9928957-5-4"]},"publication":"Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit.]; et al.","quality_controlled":"1","status":"public","conference":{"start_date":"2017-07-02","end_date":"2017-07-05","name":"33rd PLEA International Conference : Design to Thrive","location":"Edinburgh, Scotland"},"department":[{"_id":"DEP1020"},{"_id":"DEP1302"},{"_id":"DEP1055"}],"year":2017,"main_file_link":[{"url":"https://repository.uantwerpen.be/docman/iruaauth/3b0129/147552.pdf"}],"author":[{"id":"11346","full_name":"Naumann, Christine","last_name":"Naumann","first_name":"Christine"},{"last_name":"Höhmann","first_name":"Ulrike","full_name":"Höhmann, Ulrike"},{"orcid":"0000-0002-8594-3168","last_name":"Pottgiesser","first_name":"Uta","id":"27166","full_name":"Pottgiesser, Uta"}],"publication_status":"published","citation":{"ieee":"C. Naumann, U. Höhmann, and U. Pottgiesser, “Development of an analysis tool to match home environmental interventions to the specific needs of people with dementia,” in Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit.]; et al., Edinburgh, Scotland, 2017.","ama":"Naumann C, Höhmann U, Pottgiesser U. Development of an analysis tool to match home environmental interventions to the specific needs of people with dementia. In: Design to Thrive: PLEA 2017 : Proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [Edit.]; et Al. ; 2017.","apa":"Naumann, C., Höhmann, U., & Pottgiesser, U. (2017). Development of an analysis tool to match home environmental interventions to the specific needs of people with dementia. In Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit.]; et al. Edinburgh, Scotland.","chicago":"Naumann, Christine, Ulrike Höhmann, and Uta Pottgiesser. “Development of an Analysis Tool to Match Home Environmental Interventions to the Specific Needs of People with Dementia.” In Design to Thrive: PLEA 2017 : Proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [Edit.]; et Al., 2017.","van":"Naumann C, Höhmann U, Pottgiesser U. Development of an analysis tool to match home environmental interventions to the specific needs of people with dementia. In: Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit]; et al. 2017.","bjps":"Naumann C, Höhmann U and Pottgiesser U (2017) Development of an Analysis Tool to Match Home Environmental Interventions to the Specific Needs of People with Dementia. Design to Thrive: PLEA 2017 : Proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [Edit.]; et Al.","havard":"C. Naumann, U. Höhmann, U. Pottgiesser, Development of an analysis tool to match home environmental interventions to the specific needs of people with dementia, in: Design to Thrive: PLEA 2017 : Proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [Edit.]; et Al., 2017.","mla":"Naumann, Christine, et al. “Development of an Analysis Tool to Match Home Environmental Interventions to the Specific Needs of People with Dementia.” Design to Thrive: PLEA 2017 : Proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [Edit.]; et Al., 2017.","ufg":"Naumann, Christine et. al. (2017): Development of an analysis tool to match home environmental interventions to the specific needs of people with dementia, in: Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit.]; et al.","short":"C. Naumann, U. Höhmann, U. Pottgiesser, in: Design to Thrive: PLEA 2017 : Proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [Edit.]; et Al., 2017.","chicago-de":"Naumann, Christine, Ulrike Höhmann und Uta Pottgiesser. 2017. Development of an analysis tool to match home environmental interventions to the specific needs of people with dementia. In: Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit.]; et al.","din1505-2-1":"Naumann, Christine ; Höhmann, Ulrike ; Pottgiesser, Uta: Development of an analysis tool to match home environmental interventions to the specific needs of people with dementia. In: Design to Thrive: PLEA 2017 : proceedings of 33rd PLEA International Conference: 2-5 July, 2017, Edinburgh, Scotland / Brotas, Luisa [edit.]; et al., 2017"},"title":"Development of an analysis tool to match home environmental interventions to the specific needs of people with dementia"},{"publisher":" TU Delft Open","status":"public","main_file_link":[{"url":"https://repository.uantwerpen.be/docman/irua/031a68/147549.pdf","open_access":"1"}],"year":2017,"author":[{"first_name":"Ulrich","last_name":"Knaack","id":"27160","full_name":"Knaack, Ulrich"},{"orcid":"0000-0002-8594-3168","first_name":"Uta","full_name":"Pottgiesser, Uta","id":"27166","last_name":"Pottgiesser"}],"department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"citation":{"din1505-2-1":"Knaack, Ulrich ; Pottgiesser, Uta: efnMOBILE 2.0 : efficient envelopes : TU Delft Open, 2017","chicago-de":"Knaack, Ulrich und Uta Pottgiesser. 2017. efnMOBILE 2.0 : efficient envelopes. TU Delft Open.","short":"U. Knaack, U. Pottgiesser, EfnMOBILE 2.0 : Efficient Envelopes, TU Delft Open, 2017.","chicago":"Knaack, Ulrich, and Uta Pottgiesser. EfnMOBILE 2.0 : Efficient Envelopes. TU Delft Open, 2017.","apa":"Knaack, U., & Pottgiesser, U. (2017). efnMOBILE 2.0 : efficient envelopes. TU Delft Open.","ieee":"U. Knaack and U. Pottgiesser, efnMOBILE 2.0 : efficient envelopes. TU Delft Open, 2017.","ufg":"Knaack, Ulrich/Pottgiesser, Uta (2017): efnMOBILE 2.0 : efficient envelopes.","bjps":"Knaack U and Pottgiesser U (2017) EfnMOBILE 2.0 : Efficient Envelopes. TU Delft Open.","mla":"Knaack, Ulrich, and Uta Pottgiesser. EfnMOBILE 2.0 : Efficient Envelopes. TU Delft Open, 2017.","havard":"U. Knaack, U. Pottgiesser, efnMOBILE 2.0 : efficient envelopes, TU Delft Open, 2017.","van":"Knaack U, Pottgiesser U. efnMOBILE 2.0 : efficient envelopes. TU Delft Open; 2017.","ama":"Knaack U, Pottgiesser U. EfnMOBILE 2.0 : Efficient Envelopes. TU Delft Open; 2017."},"publication_status":"published","title":"efnMOBILE 2.0 : efficient envelopes","_id":"5197","language":[{"iso":"eng"}],"oa":"1","user_id":"45673","date_updated":"2023-03-15T13:49:58Z","publication_identifier":{"isbn":["978-94-92516-87-9"]},"type":"book","date_created":"2021-03-03T13:55:57Z"},{"date_created":"2021-03-03T14:03:53Z","type":"book","date_updated":"2023-03-15T13:49:58Z","user_id":"45673","language":[{"iso":"eng"}],"_id":"5199","title":"Mensen op de vlucht = People on the run","publication_status":"published","citation":{"chicago-de":"Pottgiesser, Uta, Eva Storgaard, Iris Van der Schueren und Paul Wauters. 2017. Mensen op de vlucht = People on the run.","din1505-2-1":"Pottgiesser, Uta ; Storgaard, Eva ; Van der Schueren, Iris ; Wauters, Paul: Mensen op de vlucht = People on the run, 2017","short":"U. Pottgiesser, E. Storgaard, I. Van der Schueren, P. Wauters, Mensen Op de Vlucht = People on the Run, 2017.","ufg":"Pottgiesser, Uta et. al. (2017): Mensen op de vlucht = People on the run.","bjps":"Pottgiesser U et al. (2017) Mensen Op de Vlucht = People on the Run. .","mla":"Pottgiesser, Uta, et al. Mensen Op de Vlucht = People on the Run. 2017.","havard":"U. Pottgiesser, E. Storgaard, I. Van der Schueren, P. Wauters, Mensen op de vlucht = People on the run, 2017.","van":"Pottgiesser U, Storgaard E, Van der Schueren I, Wauters P. Mensen op de vlucht = People on the run. 2017.","chicago":"Pottgiesser, Uta, Eva Storgaard, Iris Van der Schueren, and Paul Wauters. Mensen Op de Vlucht = People on the Run, 2017.","apa":"Pottgiesser, U., Storgaard, E., Van der Schueren, I., & Wauters, P. (2017). Mensen op de vlucht = People on the run.","ama":"Pottgiesser U, Storgaard E, Van der Schueren I, Wauters P. Mensen Op de Vlucht = People on the Run.; 2017.","ieee":"U. Pottgiesser, E. Storgaard, I. Van der Schueren, and P. Wauters, Mensen op de vlucht = People on the run. 2017."},"department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"author":[{"first_name":"Uta","full_name":"Pottgiesser, Uta","id":"27166","last_name":"Pottgiesser","orcid":"0000-0002-8594-3168"},{"last_name":"Storgaard","first_name":"Eva","full_name":"Storgaard, Eva"},{"last_name":"Van der Schueren","first_name":"Iris","full_name":"Van der Schueren, Iris"},{"first_name":"Paul","full_name":"Wauters, Paul","last_name":"Wauters"}],"year":2017,"status":"public"},{"publication_status":"published","citation":{"ieee":"O. Hall, M. Cardinali, and Technische Hochschule Ostwestfalen-Lippe, Eds., urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, no. 2. 2017.","ama":"Hall O, Cardinali M, Technische Hochschule Ostwestfalen-Lippe, eds. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung.; 2017.","apa":"Hall, O., Cardinali, M., & Technische Hochschule Ostwestfalen-Lippe (Eds.). (2017). urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. Die Stadt der Zukunft - Digital, gesund, sozial .","chicago":"Hall, Oliver, Marcel Cardinali, and Technische Hochschule Ostwestfalen-Lippe, eds. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. Die Stadt der Zukunft - Digital, gesund, sozial , 2017.","van":"Hall O, Cardinali M, Technische Hochschule Ostwestfalen-Lippe, editors. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. Die Stadt der Zukunft - Digital, gesund, sozial . 2017.","havard":"O. Hall, M. Cardinali, Technische Hochschule Ostwestfalen-Lippe, eds., urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, 2017.","mla":"Hall, Oliver, et al., editors. “urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung.” Die Stadt der Zukunft - Digital, gesund, sozial , no. 2, 2017.","bjps":"Hall O, Cardinali M and Technische Hochschule Ostwestfalen-Lippe (eds) (2017) urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. .","ufg":"Hall, Oliver et. al. (Hgg.) (2017): urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung.","short":"O. Hall, M. Cardinali, Technische Hochschule Ostwestfalen-Lippe, eds., urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, 2017.","chicago-de":"Hall, Oliver, Marcel Cardinali und Technische Hochschule Ostwestfalen-Lippe, Hrsg. 2017. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. Die Stadt der Zukunft - Digital, gesund, sozial .","din1505-2-1":"Hall, O. ; Cardinali, M. ; Technische Hochschule Ostwestfalen-Lippe (Hrsg.): urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, 2017"},"title":"urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung","status":"public","issue":"2","abstract":[{"lang":"ger","text":"Seit 2016 erscheint das urbanLab Magazin jährlich als Fachzeitschrift für Stadt- und Regionalplanung mit dem Anspruch Forschung, Lehre und der Praxis in den Planungsdisziplinen des Spannungsfeldes Stadt und Quartier anhand konkreter Themencluster besser zu vernetzen. Wir geben zukunftsweisenden Ideen, Fachbeiträgen, Publikationen und kontroversen Diskussionen eine Plattform und bringen sie unterstützt durch Erkenntnisse aus unserer Forschung auf den Punkt."}],"department":[{"_id":"DEP1303"},{"_id":"DEP1055"}],"year":2017,"main_file_link":[{"url":"https://www.yumpu.com/de/document/read/63562637/urbanlab-magazin-2017-die-stadt-der-zukunft","open_access":"1"}],"editor":[{"full_name":"Hall, Oliver","id":"27136","first_name":"Oliver","last_name":"Hall"},{"orcid":"0000-0002-8841-9345","first_name":"Marcel","id":"58462","full_name":"Cardinali, Marcel","last_name":"Cardinali"}],"corporate_editor":["Technische Hochschule Ostwestfalen-Lippe","Forschungsschwerpunkt urbanLab"],"date_updated":"2023-03-15T13:49:59Z","user_id":"45673","date_created":"2021-03-30T10:43:39Z","type":"journal_editor","publication_identifier":{"issn":["2566-8900"],"eissn":["2566-8919"]},"publication":"Die Stadt der Zukunft - Digital, gesund, sozial ","_id":"5362","language":[{"iso":"ger"}],"oa":"1"},{"_id":"2028","language":[{"iso":"eng"}],"date_created":"2019-11-26T14:43:04Z","type":"journal_article","publication":"Industrie 4.0-Management","publication_identifier":{"issn":["2364-9208"]},"intvolume":" 6","date_updated":"2023-03-15T13:49:38Z","user_id":"68554","department":[{"_id":"DEP5023"}],"year":2016,"author":[{"last_name":"Bator","id":"46440","full_name":"Bator, Martyna","first_name":"Martyna"},{"full_name":"Fritze, Alexander","last_name":"Fritze","first_name":"Alexander"},{"orcid":"0000-0002-3325-7887","first_name":"Volker","full_name":"Lohweg, Volker","id":"1804","last_name":"Lohweg"}],"status":"public","title":"Digitale Dokumentation - Der Einfluss der Digitalisierung auf die technische Dokumentation in der Produktion","volume":6,"citation":{"van":"Bator M, Fritze A, Lohweg V. Digitale Dokumentation - Der Einfluss der Digitalisierung auf die technische Dokumentation in der Produktion. Industrie 40-Management. 2016;6.","ama":"Bator M, Fritze A, Lohweg V. Digitale Dokumentation - Der Einfluss der Digitalisierung auf die technische Dokumentation in der Produktion. Industrie 40-Management. 2016;6.","ufg":"Bator, Martyna et. al. (2016): Digitale Dokumentation - Der Einfluss der Digitalisierung auf die technische Dokumentation in der Produktion, in: Industrie 4.0-Management 6.","havard":"M. Bator, A. Fritze, V. Lohweg, Digitale Dokumentation - Der Einfluss der Digitalisierung auf die technische Dokumentation in der Produktion, Industrie 4.0-Management. 6 (2016).","mla":"Bator, Martyna, et al. “Digitale Dokumentation - Der Einfluss Der Digitalisierung Auf Die Technische Dokumentation in Der Produktion.” Industrie 4.0-Management, vol. 6, 2016.","bjps":"Bator M, Fritze A and Lohweg V (2016) Digitale Dokumentation - Der Einfluss Der Digitalisierung Auf Die Technische Dokumentation in Der Produktion. Industrie 4.0-Management 6.","apa":"Bator, M., Fritze, A., & Lohweg, V. (2016). Digitale Dokumentation - Der Einfluss der Digitalisierung auf die technische Dokumentation in der Produktion. Industrie 4.0-Management, 6.","ieee":"M. Bator, A. Fritze, and V. Lohweg, “Digitale Dokumentation - Der Einfluss der Digitalisierung auf die technische Dokumentation in der Produktion,” Industrie 4.0-Management, vol. 6, 2016.","chicago":"Bator, Martyna, Alexander Fritze, and Volker Lohweg. “Digitale Dokumentation - Der Einfluss Der Digitalisierung Auf Die Technische Dokumentation in Der Produktion.” Industrie 4.0-Management 6 (2016).","short":"M. Bator, A. Fritze, V. Lohweg, Industrie 4.0-Management 6 (2016).","din1505-2-1":"Bator, Martyna ; Fritze, Alexander ; Lohweg, Volker: Digitale Dokumentation - Der Einfluss der Digitalisierung auf die technische Dokumentation in der Produktion. In: Industrie 4.0-Management Bd. 6 (2016)","chicago-de":"Bator, Martyna, Alexander Fritze und Volker Lohweg. 2016. Digitale Dokumentation - Der Einfluss der Digitalisierung auf die technische Dokumentation in der Produktion. Industrie 4.0-Management 6."}},{"status":"public","publisher":"Bildverarbeitung in der Automation (BVAu 2016)","author":[{"id":"52097","full_name":"Pfeifer, Anton","first_name":"Anton","last_name":"Pfeifer"},{"orcid":"0000-0002-3325-7887","last_name":"Lohweg","first_name":"Volker","id":"1804","full_name":"Lohweg, Volker"}],"year":2016,"department":[{"_id":"DEP5023"}],"citation":{"ama":"Pfeifer A, Lohweg V. Design and Implementation for Authenticating Commercial Raster Printing Using Cost-Effective Hardware. In: Bildverarbeitung in der Automation (BVAu 2016); 2016.","ieee":"A. Pfeifer and V. Lohweg, “Design and Implementation for Authenticating Commercial Raster Printing Using Cost-Effective Hardware,” 2016.","short":"A. Pfeifer, V. Lohweg, in: Bildverarbeitung in der Automation (BVAu 2016), 2016.","chicago-de":"Pfeifer, Anton und Volker Lohweg. 2016. Design and Implementation for Authenticating Commercial Raster Printing Using Cost-Effective Hardware. In: . Bildverarbeitung in der Automation (BVAu 2016).","din1505-2-1":"Pfeifer, Anton ; Lohweg, Volker: Design and Implementation for Authenticating Commercial Raster Printing Using Cost-Effective Hardware. In: : Bildverarbeitung in der Automation (BVAu 2016), 2016","van":"Pfeifer A, Lohweg V. Design and Implementation for Authenticating Commercial Raster Printing Using Cost-Effective Hardware. In Bildverarbeitung in der Automation (BVAu 2016); 2016.","havard":"A. Pfeifer, V. Lohweg, Design and Implementation for Authenticating Commercial Raster Printing Using Cost-Effective Hardware, in: Bildverarbeitung in der Automation (BVAu 2016), 2016.","bjps":"Pfeifer A and Lohweg V (2016) Design and Implementation for Authenticating Commercial Raster Printing Using Cost-Effective Hardware. Bildverarbeitung in der Automation (BVAu 2016).","mla":"Pfeifer, Anton, and Volker Lohweg. Design and Implementation for Authenticating Commercial Raster Printing Using Cost-Effective Hardware. Bildverarbeitung in der Automation (BVAu 2016), 2016.","ufg":"Pfeifer, Anton/Lohweg, Volker (2016): Design and Implementation for Authenticating Commercial Raster Printing Using Cost-Effective Hardware, in: .","apa":"Pfeifer, A., & Lohweg, V. (2016). Design and Implementation for Authenticating Commercial Raster Printing Using Cost-Effective Hardware. Bildverarbeitung in der Automation (BVAu 2016).","chicago":"Pfeifer, Anton, and Volker Lohweg. “Design and Implementation for Authenticating Commercial Raster Printing Using Cost-Effective Hardware.” Bildverarbeitung in der Automation (BVAu 2016), 2016."},"title":"Design and Implementation for Authenticating Commercial Raster Printing Using Cost-Effective Hardware","language":[{"iso":"eng"}],"_id":"2029","user_id":"68554","date_updated":"2023-03-15T13:49:38Z","date_created":"2019-11-26T14:43:05Z","type":"conference"},{"status":"public","issue":"3/4","author":[{"orcid":"0000-0002-3325-7887","first_name":"Volker","last_name":"Lohweg","full_name":"Lohweg, Volker","id":"1804"},{"last_name":"Mönks","first_name":"Uwe","full_name":"Mönks, Uwe","id":"1825"}],"year":2016,"department":[{"_id":"DEP5023"}],"citation":{"ieee":"V. Lohweg and U. Mönks, “Schwellwerte und Sensoren - Predictive Maintenance in der Praxis,” Unternehmermagazin, vol. 64, no. 3/4, 2016.","ama":"Lohweg V, Mönks U. Schwellwerte und Sensoren - Predictive Maintenance in der Praxis. Unternehmermagazin. 2016;64(3/4).","short":"V. Lohweg, U. Mönks, Unternehmermagazin 64 (2016).","chicago-de":"Lohweg, Volker und Uwe Mönks. 2016. Schwellwerte und Sensoren - Predictive Maintenance in der Praxis. Unternehmermagazin 64, Nr. 3/4.","din1505-2-1":"Lohweg, Volker ; Mönks, Uwe: Schwellwerte und Sensoren - Predictive Maintenance in der Praxis. In: Unternehmermagazin Bd. 64 (2016), Nr. 3/4","apa":"Lohweg, V., & Mönks, U. (2016). Schwellwerte und Sensoren - Predictive Maintenance in der Praxis. Unternehmermagazin, 64(3/4).","chicago":"Lohweg, Volker, and Uwe Mönks. “Schwellwerte Und Sensoren - Predictive Maintenance in Der Praxis.” Unternehmermagazin 64, no. 3/4 (2016).","van":"Lohweg V, Mönks U. Schwellwerte und Sensoren - Predictive Maintenance in der Praxis. Unternehmermagazin. 2016;64(3/4).","mla":"Lohweg, Volker, and Uwe Mönks. “Schwellwerte Und Sensoren - Predictive Maintenance in Der Praxis.” Unternehmermagazin, vol. 64, no. 3/4, 2016.","bjps":"Lohweg V and Mönks U (2016) Schwellwerte Und Sensoren - Predictive Maintenance in Der Praxis. Unternehmermagazin 64.","havard":"V. Lohweg, U. Mönks, Schwellwerte und Sensoren - Predictive Maintenance in der Praxis, Unternehmermagazin. 64 (2016).","ufg":"Lohweg, Volker/Mönks, Uwe (2016): Schwellwerte und Sensoren - Predictive Maintenance in der Praxis, in: Unternehmermagazin 64 (3/4)."},"volume":64,"title":"Schwellwerte und Sensoren - Predictive Maintenance in der Praxis","_id":"2030","language":[{"iso":"eng"}],"intvolume":" 64","user_id":"68554","date_updated":"2023-03-15T13:49:38Z","publication_identifier":{"issn":["0022-6416"]},"publication":"Unternehmermagazin","type":"journal_article","date_created":"2019-11-26T14:43:07Z"},{"abstract":[{"text":"Currently, new research questions arise because of the paradigms of Industry 4.0, which aims to bring together mechatronic systems and information technologies. Its general idea is to create an Internet of Things consisting of communicating machines, which implement concepts for self-configuration, -diagnosis, and -optimisation. The realisation of these functionalities is in focus of current research and gains in importance not only in the industrial sector. The overall goal is to equip technical systems with intelligence to enable for autonomous behaviour. Therefore, tasks like information processing, extensive networking, or system monitoring using sensor and information fusion systems have to be reconsidered. This contribution focuses on the design and maintenance of sensor and information fusion systems and presents a preliminary evaluation of a design concept for such applications. The concept is developed to automatically configure sensor and information fusion systems, which is a time-consuming and complex task when carried out manually. It reduces the perceived complexity of the application and supports the designer during design and maintenance of the sensor and information fusion system.","lang":"eng"}],"author":[{"first_name":"Alexander","full_name":"Fritze, Alexander","last_name":"Fritze"},{"last_name":"Mönks","id":"1825","first_name":"Uwe","full_name":"Mönks, Uwe"},{"orcid":"0000-0002-3325-7887","full_name":"Lohweg, Volker","id":"1804","first_name":"Volker","last_name":"Lohweg"}],"year":2016,"department":[{"_id":"DEP5023"}],"status":"public","title":"A Concept for Self-Configuration of Adaptive Sensor and Information Fusion Systems","citation":{"chicago-de":"Fritze, Alexander, Uwe Mönks und Volker Lohweg. 2016. A Concept for Self-Configuration of Adaptive Sensor and Information Fusion Systems. In: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016). Berlin.","din1505-2-1":"Fritze, Alexander ; Mönks, Uwe ; Lohweg, Volker: A Concept for Self-Configuration of Adaptive Sensor and Information Fusion Systems. In: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016). Berlin, 2016","short":"A. Fritze, U. Mönks, V. Lohweg, in: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin, 2016.","chicago":"Fritze, Alexander, Uwe Mönks, and Volker Lohweg. “A Concept for Self-Configuration of Adaptive Sensor and Information Fusion Systems.” In 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016). Berlin, 2016.","apa":"Fritze, A., Mönks, U., & Lohweg, V. (2016). A Concept for Self-Configuration of Adaptive Sensor and Information Fusion Systems. In 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016). Berlin.","ufg":"Fritze, Alexander et. al. (2016): A Concept for Self-Configuration of Adaptive Sensor and Information Fusion Systems, in: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin.","mla":"Fritze, Alexander, et al. “A Concept for Self-Configuration of Adaptive Sensor and Information Fusion Systems.” 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), 2016.","bjps":"Fritze A, Mönks U and Lohweg V (2016) A Concept for Self-Configuration of Adaptive Sensor and Information Fusion Systems. 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016). Berlin.","havard":"A. Fritze, U. Mönks, V. Lohweg, A Concept for Self-Configuration of Adaptive Sensor and Information Fusion Systems, in: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin, 2016.","van":"Fritze A, Mönks U, Lohweg V. A Concept for Self-Configuration of Adaptive Sensor and Information Fusion Systems. In: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016). Berlin; 2016.","ieee":"A. Fritze, U. Mönks, and V. Lohweg, “A Concept for Self-Configuration of Adaptive Sensor and Information Fusion Systems,” in 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), 2016.","ama":"Fritze A, Mönks U, Lohweg V. A Concept for Self-Configuration of Adaptive Sensor and Information Fusion Systems. In: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016). Berlin; 2016."},"_id":"2031","place":"Berlin","language":[{"iso":"eng"}],"publication":"21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016)","date_created":"2019-11-26T14:43:08Z","type":"conference","user_id":"74004","date_updated":"2023-03-15T13:49:38Z"},{"_id":"2032","language":[{"iso":"eng"}],"user_id":"74004","date_updated":"2023-03-15T13:49:38Z","publication":"21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016)","date_created":"2019-11-26T14:43:10Z","type":"conference","status":"public","abstract":[{"lang":"eng","text":"The way how we interact with banknotes is changing. This raises questions on how we interact with electronic payment systems. The general idea is to design low-cost electronics for cash handling systems. We establish a prototypical demonstrator which allows a consistent image capture quality and is able to handle complex algorithms for banknote authentication on cost-effective hardware. Therefore, tasks regarding reducing the evaluation time, without diminishing the reliability of the algorithms have to be considered. In this contribution we focus on the re-design of an authentication module for detection of commercial offset printing. This module analyses images in view to periodic printing patterns by means of the Discrete Fourier Transform (DFT). We propose to implement two concepts: an adaptive software architecture for DFT and parallel image processing. The re-design reduces evaluation time, without compromising the reliability of the authentication algorithm."}],"author":[{"first_name":"Anton","id":"52097","full_name":"Pfeifer, Anton","last_name":"Pfeifer"},{"orcid":"0000-0002-3325-7887","first_name":"Volker","id":"1804","last_name":"Lohweg","full_name":"Lohweg, Volker"}],"year":2016,"department":[{"_id":"DEP5023"}],"citation":{"short":"A. Pfeifer, V. Lohweg, in: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), 2016.","din1505-2-1":"Pfeifer, Anton ; Lohweg, Volker: Detection of Commercial Offset Printing using an Adaptive Software Architecture for the DFT. In: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), 2016","chicago-de":"Pfeifer, Anton und Volker Lohweg. 2016. Detection of Commercial Offset Printing using an Adaptive Software Architecture for the DFT. In: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016).","van":"Pfeifer A, Lohweg V. Detection of Commercial Offset Printing using an Adaptive Software Architecture for the DFT. In: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016). 2016.","ufg":"Pfeifer, Anton/Lohweg, Volker (2016): Detection of Commercial Offset Printing using an Adaptive Software Architecture for the DFT, in: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016).","bjps":"Pfeifer A and Lohweg V (2016) Detection of Commercial Offset Printing Using an Adaptive Software Architecture for the DFT. 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016).","mla":"Pfeifer, Anton, and Volker Lohweg. “Detection of Commercial Offset Printing Using an Adaptive Software Architecture for the DFT.” 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), 2016.","havard":"A. Pfeifer, V. Lohweg, Detection of Commercial Offset Printing using an Adaptive Software Architecture for the DFT, in: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), 2016.","apa":"Pfeifer, A., & Lohweg, V. (2016). Detection of Commercial Offset Printing using an Adaptive Software Architecture for the DFT. In 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016).","chicago":"Pfeifer, Anton, and Volker Lohweg. “Detection of Commercial Offset Printing Using an Adaptive Software Architecture for the DFT.” In 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), 2016.","ama":"Pfeifer A, Lohweg V. Detection of Commercial Offset Printing using an Adaptive Software Architecture for the DFT. In: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016). ; 2016.","ieee":"A. Pfeifer and V. Lohweg, “Detection of Commercial Offset Printing using an Adaptive Software Architecture for the DFT,” in 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), 2016."},"title":"Detection of Commercial Offset Printing using an Adaptive Software Architecture for the DFT"},{"user_id":"74004","date_updated":"2023-03-15T13:49:38Z","publication":"21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin, ","date_created":"2019-11-26T14:43:11Z","type":"conference","_id":"2033","language":[{"iso":"eng"}],"citation":{"ufg":"Deppe, Sahar et. al. (2016): Anomaly Detection on ATMs via Time Series Motif Discovery, in: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin, .","havard":"S. Deppe, A. Dicks, V. Lohweg, Anomaly Detection on ATMs via Time Series Motif Discovery, in: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin, , 2016.","mla":"Deppe, Sahar, et al. “Anomaly Detection on ATMs via Time Series Motif Discovery.” 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin, , 2016.","bjps":"Deppe S, Dicks A and Lohweg V (2016) Anomaly Detection on ATMs via Time Series Motif Discovery. 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin, .","van":"Deppe S, Dicks A, Lohweg V. Anomaly Detection on ATMs via Time Series Motif Discovery. In: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin, . 2016.","ama":"Deppe S, Dicks A, Lohweg V. Anomaly Detection on ATMs via Time Series Motif Discovery. In: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin, . ; 2016.","chicago":"Deppe, Sahar, Alexander Dicks, and Volker Lohweg. “Anomaly Detection on ATMs via Time Series Motif Discovery.” In 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin, , 2016.","apa":"Deppe, S., Dicks, A., & Lohweg, V. (2016). Anomaly Detection on ATMs via Time Series Motif Discovery. In 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin, .","ieee":"S. Deppe, A. Dicks, and V. Lohweg, “Anomaly Detection on ATMs via Time Series Motif Discovery,” in 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin, , 2016.","din1505-2-1":"Deppe, Sahar ; Dicks, Alexander ; Lohweg, Volker: Anomaly Detection on ATMs via Time Series Motif Discovery. In: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin, , 2016","chicago-de":"Deppe, Sahar, Alexander Dicks und Volker Lohweg. 2016. Anomaly Detection on ATMs via Time Series Motif Discovery. In: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin, .","short":"S. Deppe, A. Dicks, V. Lohweg, in: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin, , 2016."},"title":"Anomaly Detection on ATMs via Time Series Motif Discovery","status":"public","abstract":[{"lang":"eng","text":"Cash machines or automated teller machines (ATMs) are one of the typical ways to get cash around the world. Such machines are under a variety of criminal attacks. Most of the manipulations are performed through skimming. In 2014, such attacks led to a damage of approx. 280 million Euro within the EU. In this paper, we propose an approach to detect anomalies and attacks on ATMs via motif discovery. Motifs are frequently unknown occurring sequences or events in a time series signal. State of the ATM is captured by innovative piezoelectric sensor networks to analyse the occurring vibrations. The captured signals are inspected by the Complex Quad-Tree Wavelet Packet transform which provides broad frequency analysis of a signal in various scales. Next, features are extracted from the selected scale based on the information content, to detect motifs. Detected motifs provide the prototype patterns for anomaly detection or classification tasks."}],"author":[{"first_name":"Sahar","last_name":"Deppe","id":"52121","full_name":"Deppe, Sahar"},{"first_name":"Alexander","last_name":"Dicks","id":"1853","full_name":"Dicks, Alexander"},{"orcid":"0000-0002-3325-7887","id":"1804","first_name":"Volker","last_name":"Lohweg","full_name":"Lohweg, Volker"}],"year":2016,"department":[{"_id":"DEP5023"}]},{"language":[{"iso":"eng"}],"_id":"2036","date_updated":"2023-03-15T13:49:38Z","user_id":"74004","date_created":"2019-11-26T14:43:15Z","type":"conference","publication":"Journal of Sensors and Sensor Systems, ISSN 2194-8771","status":"public","publisher":"Copernicus Publications","department":[{"_id":"DEP5023"}],"author":[{"full_name":"Ehlenbröker, Jan-Friedrich","first_name":"Jan-Friedrich","last_name":"Ehlenbröker","id":"1852"},{"first_name":"Uwe","last_name":"Mönks","id":"1825","full_name":"Mönks, Uwe"},{"orcid":"0000-0002-3325-7887","first_name":"Volker","last_name":"Lohweg","full_name":"Lohweg, Volker","id":"1804"}],"year":2016,"abstract":[{"text":"In industrial processes a vast variety of different sensors is increasingly used to measure and control processes, machines, and logistics. One way to handle the resulting large amount of data created by hundreds or even thousands of different sensors in an application is to employ information fusion systems. Information fusion systems, e.g. for condition monitoring, combine different sources of information, like sensors, to generate the state of a complex system. The result of such an information fusion process is regarded as a health indicator of a complex system. Therefore, information fusion approaches are applied to, e.g., automatically inform one about a reduction in production quality, or detect possibly dangerous situations. Considering the importance of sensors in the previously described information fusion systems and in industrial processes in general, a defective sensor has several negative consequences. It may lead to machine failure, e.g. when wear and tear of a machine is not detected sufficiently in advance. In this contribution we present a method to detect faulty sensors by computing the consistency between sensor values. The proposed sensor defect detection algorithm exemplarily utilises the structure of a multilayered group-based sensor fusion algorithm. Defect detection results of the proposed method for different test cases and the method's capability to detect a number of typical sensor defects are shown.","lang":"eng"}],"citation":{"chicago-de":"Ehlenbröker, Jan-Friedrich, Uwe Mönks und Volker Lohweg. 2016. Sensor Defect Detection in Multisensor Information Fusion. In: Journal of Sensors and Sensor Systems, ISSN 2194-8771. Copernicus Publications.","din1505-2-1":"Ehlenbröker, Jan-Friedrich ; Mönks, Uwe ; Lohweg, Volker: Sensor Defect Detection in Multisensor Information Fusion. In: Journal of Sensors and Sensor Systems, ISSN 2194-8771 : Copernicus Publications, 2016","short":"J.-F. Ehlenbröker, U. Mönks, V. Lohweg, in: Journal of Sensors and Sensor Systems, ISSN 2194-8771, Copernicus Publications, 2016.","chicago":"Ehlenbröker, Jan-Friedrich, Uwe Mönks, and Volker Lohweg. “Sensor Defect Detection in Multisensor Information Fusion.” In Journal of Sensors and Sensor Systems, ISSN 2194-8771. Copernicus Publications, 2016.","ieee":"J.-F. Ehlenbröker, U. Mönks, and V. Lohweg, “Sensor Defect Detection in Multisensor Information Fusion,” in Journal of Sensors and Sensor Systems, ISSN 2194-8771, 2016.","apa":"Ehlenbröker, J.-F., Mönks, U., & Lohweg, V. (2016). Sensor Defect Detection in Multisensor Information Fusion. In Journal of Sensors and Sensor Systems, ISSN 2194-8771. Copernicus Publications.","havard":"J.-F. Ehlenbröker, U. Mönks, V. Lohweg, Sensor Defect Detection in Multisensor Information Fusion, in: Journal of Sensors and Sensor Systems, ISSN 2194-8771, Copernicus Publications, 2016.","bjps":"Ehlenbröker J-F, Mönks U and Lohweg V (2016) Sensor Defect Detection in Multisensor Information Fusion. Journal of Sensors and Sensor Systems, ISSN 2194-8771. Copernicus Publications.","mla":"Ehlenbröker, Jan-Friedrich, et al. “Sensor Defect Detection in Multisensor Information Fusion.” Journal of Sensors and Sensor Systems, ISSN 2194-8771, Copernicus Publications, 2016.","ufg":"Ehlenbröker, Jan-Friedrich et. al. (2016): Sensor Defect Detection in Multisensor Information Fusion, in: Journal of Sensors and Sensor Systems, ISSN 2194-8771.","ama":"Ehlenbröker J-F, Mönks U, Lohweg V. Sensor Defect Detection in Multisensor Information Fusion. In: Journal of Sensors and Sensor Systems, ISSN 2194-8771. Copernicus Publications; 2016.","van":"Ehlenbröker J-F, Mönks U, Lohweg V. Sensor Defect Detection in Multisensor Information Fusion. In: Journal of Sensors and Sensor Systems, ISSN 2194-8771. Copernicus Publications; 2016."},"title":"Sensor Defect Detection in Multisensor Information Fusion"},{"_id":"2037","language":[{"iso":"eng"}],"publication":"3rd International Conference on System-Integrated Intelligence - New Challenges for Product and Production Engineering ","date_created":"2019-11-26T14:43:16Z","type":"conference","user_id":"74004","date_updated":"2023-03-15T13:49:38Z","abstract":[{"text":"The complexity of industrial applications has constantly increased over the last decades. New paradigms arise in the context of the fourth industrial revolution by bringing together mechatronic systems and information technologies. Tasks like information processing, extensive networking, or system monitoring using sensor and information fusion systems are incorporated with the aim to design applications that are capable for self-configuration, -diagnosis, and -optimisation. This contribution focuses on the design of sensor and information fusion systems. A methodology for the design process of such systems is proposed that serves as tool for auto-configuration to facilitate self-diagnosis and -optimisation.","lang":"eng"}],"author":[{"last_name":"Fritze","first_name":"Alexander","full_name":"Fritze, Alexander"},{"first_name":"Uwe","full_name":"Mönks, Uwe","id":"1825","last_name":"Mönks"},{"orcid":"0000-0002-3325-7887","first_name":"Volker","full_name":"Lohweg, Volker","last_name":"Lohweg","id":"1804"}],"year":2016,"department":[{"_id":"DEP5023"}],"publisher":"Paderborn, Germany","status":"public","title":"A Support System for Sensor and Information Fusion System Design","citation":{"ieee":"A. Fritze, U. Mönks, and V. Lohweg, “A Support System for Sensor and Information Fusion System Design,” in 3rd International Conference on System-Integrated Intelligence - New Challenges for Product and Production Engineering , 2016.","ama":"Fritze A, Mönks U, Lohweg V. A Support System for Sensor and Information Fusion System Design. In: 3rd International Conference on System-Integrated Intelligence - New Challenges for Product and Production Engineering . Paderborn, Germany; 2016.","apa":"Fritze, A., Mönks, U., & Lohweg, V. (2016). A Support System for Sensor and Information Fusion System Design. In 3rd International Conference on System-Integrated Intelligence - New Challenges for Product and Production Engineering . Paderborn, Germany.","chicago":"Fritze, Alexander, Uwe Mönks, and Volker Lohweg. “A Support System for Sensor and Information Fusion System Design.” In 3rd International Conference on System-Integrated Intelligence - New Challenges for Product and Production Engineering . Paderborn, Germany, 2016.","van":"Fritze A, Mönks U, Lohweg V. A Support System for Sensor and Information Fusion System Design. In: 3rd International Conference on System-Integrated Intelligence - New Challenges for Product and Production Engineering . Paderborn, Germany; 2016.","havard":"A. Fritze, U. Mönks, V. Lohweg, A Support System for Sensor and Information Fusion System Design, in: 3rd International Conference on System-Integrated Intelligence - New Challenges for Product and Production Engineering , Paderborn, Germany, 2016.","bjps":"Fritze A, Mönks U and Lohweg V (2016) A Support System for Sensor and Information Fusion System Design. 3rd International Conference on System-Integrated Intelligence - New Challenges for Product and Production Engineering . Paderborn, Germany.","mla":"Fritze, Alexander, et al. “A Support System for Sensor and Information Fusion System Design.” 3rd International Conference on System-Integrated Intelligence - New Challenges for Product and Production Engineering , Paderborn, Germany, 2016.","ufg":"Fritze, Alexander et. al. (2016): A Support System for Sensor and Information Fusion System Design, in: 3rd International Conference on System-Integrated Intelligence - New Challenges for Product and Production Engineering .","short":"A. Fritze, U. Mönks, V. Lohweg, in: 3rd International Conference on System-Integrated Intelligence - New Challenges for Product and Production Engineering , Paderborn, Germany, 2016.","chicago-de":"Fritze, Alexander, Uwe Mönks und Volker Lohweg. 2016. A Support System for Sensor and Information Fusion System Design. In: 3rd International Conference on System-Integrated Intelligence - New Challenges for Product and Production Engineering . Paderborn, Germany.","din1505-2-1":"Fritze, Alexander ; Mönks, Uwe ; Lohweg, Volker: A Support System for Sensor and Information Fusion System Design. In: 3rd International Conference on System-Integrated Intelligence - New Challenges for Product and Production Engineering : Paderborn, Germany, 2016"}},{"publication":"AMA Wissenschaftsrat, Saarbrücken (eingeladener Vortrag),","date_created":"2019-11-26T14:43:18Z","type":"conference","user_id":"68554","date_updated":"2023-03-15T13:49:38Z","language":[{"iso":"eng"}],"_id":"2038","title":"Verteilte attributbasierte Sensor- und Informationsfusion als Basis für Condition Monitoring","citation":{"ama":"Lohweg V. Verteilte attributbasierte Sensor- und Informationsfusion als Basis für Condition Monitoring. In: AMA Wissenschaftsrat, Saarbrücken (Eingeladener Vortrag),. ; 2016.","ieee":"V. Lohweg, “Verteilte attributbasierte Sensor- und Informationsfusion als Basis für Condition Monitoring,” in AMA Wissenschaftsrat, Saarbrücken (eingeladener Vortrag), 2016.","havard":"V. Lohweg, Verteilte attributbasierte Sensor- und Informationsfusion als Basis für Condition Monitoring, in: AMA Wissenschaftsrat, Saarbrücken (Eingeladener Vortrag), 2016.","mla":"Lohweg, Volker. “Verteilte Attributbasierte Sensor- Und Informationsfusion Als Basis Für Condition Monitoring.” AMA Wissenschaftsrat, Saarbrücken (Eingeladener Vortrag), 2016.","bjps":"Lohweg V (2016) Verteilte Attributbasierte Sensor- Und Informationsfusion Als Basis Für Condition Monitoring. AMA Wissenschaftsrat, Saarbrücken (Eingeladener Vortrag),.","ufg":"Lohweg, Volker (2016): Verteilte attributbasierte Sensor- und Informationsfusion als Basis für Condition Monitoring, in: AMA Wissenschaftsrat, Saarbrücken (eingeladener Vortrag),.","van":"Lohweg V. Verteilte attributbasierte Sensor- und Informationsfusion als Basis für Condition Monitoring. In: AMA Wissenschaftsrat, Saarbrücken (eingeladener Vortrag),. 2016.","chicago":"Lohweg, Volker. “Verteilte Attributbasierte Sensor- Und Informationsfusion Als Basis Für Condition Monitoring.” In AMA Wissenschaftsrat, Saarbrücken (Eingeladener Vortrag), 2016.","apa":"Lohweg, V. (2016). Verteilte attributbasierte Sensor- und Informationsfusion als Basis für Condition Monitoring. In AMA Wissenschaftsrat, Saarbrücken (eingeladener Vortrag),.","din1505-2-1":"Lohweg, Volker: Verteilte attributbasierte Sensor- und Informationsfusion als Basis für Condition Monitoring. In: AMA Wissenschaftsrat, Saarbrücken (eingeladener Vortrag),, 2016","chicago-de":"Lohweg, Volker. 2016. Verteilte attributbasierte Sensor- und Informationsfusion als Basis für Condition Monitoring. In: AMA Wissenschaftsrat, Saarbrücken (eingeladener Vortrag),.","short":"V. Lohweg, in: AMA Wissenschaftsrat, Saarbrücken (Eingeladener Vortrag), 2016."},"year":2016,"author":[{"full_name":"Lohweg, Volker","first_name":"Volker","id":"1804","last_name":"Lohweg","orcid":"0000-0002-3325-7887"}],"department":[{"_id":"DEP5023"}],"status":"public"},{"title":"Intaglio Quality Measurement","citation":{"ufg":"Funk, Mark et. al. (2016): Intaglio Quality Measurement, in: Optical Document Security - The Conference on Optical Security and Counterfeit Detection V, San Francisco, CA, USA .","havard":"M. Funk, E. Gillich, T. Türke, V. Lohweg, Intaglio Quality Measurement, in: Optical Document Security - The Conference on Optical Security and Counterfeit Detection V, San Francisco, CA, USA , 2016.","mla":"Funk, Mark, et al. “Intaglio Quality Measurement.” Optical Document Security - The Conference on Optical Security and Counterfeit Detection V, 2016.","bjps":"Funk M et al. (2016) Intaglio Quality Measurement. Optical Document Security - The Conference on Optical Security and Counterfeit Detection V. San Francisco, CA, USA .","van":"Funk M, Gillich E, Türke T, Lohweg V. Intaglio Quality Measurement. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection V. San Francisco, CA, USA ; 2016.","ama":"Funk M, Gillich E, Türke T, Lohweg V. Intaglio Quality Measurement. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection V. San Francisco, CA, USA ; 2016.","chicago":"Funk, Mark, Eugen Gillich, Thomas Türke, and Volker Lohweg. “Intaglio Quality Measurement.” In Optical Document Security - The Conference on Optical Security and Counterfeit Detection V. San Francisco, CA, USA , 2016.","apa":"Funk, M., Gillich, E., Türke, T., & Lohweg, V. (2016). Intaglio Quality Measurement. In Optical Document Security - The Conference on Optical Security and Counterfeit Detection V. San Francisco, CA, USA .","ieee":"M. Funk, E. Gillich, T. Türke, and V. Lohweg, “Intaglio Quality Measurement,” in Optical Document Security - The Conference on Optical Security and Counterfeit Detection V, 2016.","chicago-de":"Funk, Mark, Eugen Gillich, Thomas Türke und Volker Lohweg. 2016. Intaglio Quality Measurement. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection V. San Francisco, CA, USA .","din1505-2-1":"Funk, Mark ; Gillich, Eugen ; Türke, Thomas ; Lohweg, Volker: Intaglio Quality Measurement. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection V. San Francisco, CA, USA , 2016","short":"M. Funk, E. Gillich, T. Türke, V. Lohweg, in: Optical Document Security - The Conference on Optical Security and Counterfeit Detection V, San Francisco, CA, USA , 2016."},"department":[{"_id":"DEP5023"}],"year":2016,"author":[{"first_name":"Mark","id":"52473","full_name":"Funk, Mark","last_name":"Funk"},{"last_name":"Gillich","full_name":"Gillich, Eugen","id":"1706","first_name":"Eugen"},{"first_name":"Thomas","full_name":"Türke, Thomas","last_name":"Türke"},{"id":"1804","first_name":"Volker","last_name":"Lohweg","full_name":"Lohweg, Volker","orcid":"0000-0002-3325-7887"}],"abstract":[{"lang":"eng","text":"In this paper an advanced approach for Intaglio quality control is presented. In the first step, the essential informationabout the printing process, research objects and measurement setup is provided. Following, the mathematical approachbased on image processing methods is described which imitates the printers manner to examine the optical characteristicsof Intaglio prints. The main focus is the early recognition of tending quality deviations to be able to support the printerthrough recommendations on readjustments of the machine settings. Therefore, specific key values are generated whichdescribe the prints overall quality, regarding its optical characteristics and the occurrence of printing flaws. The resultsshown at the end encourage extended developments."}],"status":"public","date_created":"2019-11-26T14:43:19Z","type":"conference","publication":"Optical Document Security - The Conference on Optical Security and Counterfeit Detection V","date_updated":"2023-03-15T13:49:38Z","user_id":"74004","language":[{"iso":"eng"}],"place":"San Francisco, CA, USA ","_id":"2039"},{"_id":"2040","place":"San Francisco, CA, USA ","language":[{"iso":"eng"}],"publication":"Optical Document Security - The Conference on Optical Security and Counterfeit Detection V","date_created":"2019-11-26T14:43:20Z","type":"conference","user_id":"74004","date_updated":"2023-03-15T13:49:38Z","abstract":[{"text":"Banknote authentication plays a fundamental role in banknote circulation. Banknotes undergo some major changes in thenext years because electronic payment systems will get more common which will change the user behaviour. Furthermore,technologies of counterfeiters will improve progressively and continuously. We propose a two-sage procedure for theeffective development for the design of simple electronics for cash handliung systems: First, we establish a high qualityimage acquisition system which allows for a consistent image capture quality and is able to handle complex softwarealgorithms for banknote authentication. Second, we take the algorithms and port them on cost-efficient hardware. It isshown in this paper that a reliable authentication of almost each banknote is possible for to specialised low-cost systemssuch as point-of-sale cash units.","lang":"eng"}],"author":[{"first_name":"Eugen","id":"1706","last_name":"Gillich","full_name":"Gillich, Eugen"},{"id":"46243","first_name":"Jan Leif","last_name":"Hoffmann","full_name":"Hoffmann, Jan Leif"},{"last_name":"Dörksen","first_name":"Helene","id":"46416","full_name":"Dörksen, Helene"},{"first_name":"Volker","full_name":"Lohweg, Volker","last_name":"Lohweg","id":"1804","orcid":"0000-0002-3325-7887"},{"full_name":"Schaede, Johannes","first_name":"Johannes","last_name":"Schaede","id":"2128"}],"year":2016,"department":[{"_id":"DEP5023"}],"status":"public","title":"Data Collection Unit – A Platform for Printing Process Authentication","citation":{"chicago":"Gillich, Eugen, Jan Leif Hoffmann, Helene Dörksen, Volker Lohweg, and Johannes Schaede. “Data Collection Unit – A Platform for Printing Process Authentication.” In Optical Document Security - The Conference on Optical Security and Counterfeit Detection V. San Francisco, CA, USA , 2016.","ieee":"E. Gillich, J. L. Hoffmann, H. Dörksen, V. Lohweg, and J. Schaede, “Data Collection Unit – A Platform for Printing Process Authentication,” in Optical Document Security - The Conference on Optical Security and Counterfeit Detection V, 2016.","apa":"Gillich, E., Hoffmann, J. L., Dörksen, H., Lohweg, V., & Schaede, J. (2016). Data Collection Unit – A Platform for Printing Process Authentication. In Optical Document Security - The Conference on Optical Security and Counterfeit Detection V. San Francisco, CA, USA .","havard":"E. Gillich, J.L. Hoffmann, H. Dörksen, V. Lohweg, J. Schaede, Data Collection Unit – A Platform for Printing Process Authentication, in: Optical Document Security - The Conference on Optical Security and Counterfeit Detection V, San Francisco, CA, USA , 2016.","bjps":"Gillich E et al. (2016) Data Collection Unit – A Platform for Printing Process Authentication. Optical Document Security - The Conference on Optical Security and Counterfeit Detection V. San Francisco, CA, USA .","mla":"Gillich, Eugen, et al. “Data Collection Unit – A Platform for Printing Process Authentication.” Optical Document Security - The Conference on Optical Security and Counterfeit Detection V, 2016.","ufg":"Gillich, Eugen et. al. (2016): Data Collection Unit – A Platform for Printing Process Authentication, in: Optical Document Security - The Conference on Optical Security and Counterfeit Detection V, San Francisco, CA, USA .","ama":"Gillich E, Hoffmann JL, Dörksen H, Lohweg V, Schaede J. Data Collection Unit – A Platform for Printing Process Authentication. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection V. San Francisco, CA, USA ; 2016.","van":"Gillich E, Hoffmann JL, Dörksen H, Lohweg V, Schaede J. Data Collection Unit – A Platform for Printing Process Authentication. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection V. San Francisco, CA, USA ; 2016.","din1505-2-1":"Gillich, Eugen ; Hoffmann, Jan Leif ; Dörksen, Helene ; Lohweg, Volker ; Schaede, Johannes: Data Collection Unit – A Platform for Printing Process Authentication. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection V. San Francisco, CA, USA , 2016","chicago-de":"Gillich, Eugen, Jan Leif Hoffmann, Helene Dörksen, Volker Lohweg und Johannes Schaede. 2016. Data Collection Unit – A Platform for Printing Process Authentication. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection V. San Francisco, CA, USA .","short":"E. Gillich, J.L. Hoffmann, H. Dörksen, V. Lohweg, J. Schaede, in: Optical Document Security - The Conference on Optical Security and Counterfeit Detection V, San Francisco, CA, USA , 2016."}},{"place":"San Francisco, CA, USA","language":[{"iso":"eng"}],"_id":"2041","user_id":"68554","date_updated":"2023-03-15T13:49:38Z","publication":"Optical Document Security - The Conference on Optical Security and Counterfeit Detection V","type":"conference","date_created":"2019-11-26T14:43:21Z","status":"public","author":[{"id":"2128","first_name":"Johannes","last_name":"Schaede","full_name":"Schaede, Johannes"},{"orcid":"0000-0002-3325-7887","id":"1804","last_name":"Lohweg","full_name":"Lohweg, Volker","first_name":"Volker"},{"last_name":"Knobloch","full_name":"Knobloch, Alexander","first_name":"Alexander"}],"year":2016,"department":[{"_id":"DEP5023"}],"citation":{"ama":"Schaede J, Lohweg V, Knobloch A. Banknote Cash Challenges met by advancing Low Cost Image Analysis Tools. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection V. San Francisco, CA, USA; 2016.","ieee":"J. Schaede, V. Lohweg, and A. Knobloch, “Banknote Cash Challenges met by advancing Low Cost Image Analysis Tools,” in Optical Document Security - The Conference on Optical Security and Counterfeit Detection V, 2016.","ufg":"Schaede, Johannes et. al. (2016): Banknote Cash Challenges met by advancing Low Cost Image Analysis Tools, in: Optical Document Security - The Conference on Optical Security and Counterfeit Detection V, San Francisco, CA, USA.","havard":"J. Schaede, V. Lohweg, A. Knobloch, Banknote Cash Challenges met by advancing Low Cost Image Analysis Tools, in: Optical Document Security - The Conference on Optical Security and Counterfeit Detection V, San Francisco, CA, USA, 2016.","bjps":"Schaede J, Lohweg V and Knobloch A (2016) Banknote Cash Challenges Met by Advancing Low Cost Image Analysis Tools. Optical Document Security - The Conference on Optical Security and Counterfeit Detection V. San Francisco, CA, USA.","mla":"Schaede, Johannes, et al. “Banknote Cash Challenges Met by Advancing Low Cost Image Analysis Tools.” Optical Document Security - The Conference on Optical Security and Counterfeit Detection V, 2016.","van":"Schaede J, Lohweg V, Knobloch A. Banknote Cash Challenges met by advancing Low Cost Image Analysis Tools. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection V. San Francisco, CA, USA; 2016.","chicago":"Schaede, Johannes, Volker Lohweg, and Alexander Knobloch. “Banknote Cash Challenges Met by Advancing Low Cost Image Analysis Tools.” In Optical Document Security - The Conference on Optical Security and Counterfeit Detection V. San Francisco, CA, USA, 2016.","apa":"Schaede, J., Lohweg, V., & Knobloch, A. (2016). Banknote Cash Challenges met by advancing Low Cost Image Analysis Tools. In Optical Document Security - The Conference on Optical Security and Counterfeit Detection V. San Francisco, CA, USA.","chicago-de":"Schaede, Johannes, Volker Lohweg und Alexander Knobloch. 2016. Banknote Cash Challenges met by advancing Low Cost Image Analysis Tools. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection V. San Francisco, CA, USA.","din1505-2-1":"Schaede, Johannes ; Lohweg, Volker ; Knobloch, Alexander: Banknote Cash Challenges met by advancing Low Cost Image Analysis Tools. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection V. San Francisco, CA, USA, 2016","short":"J. Schaede, V. Lohweg, A. Knobloch, in: Optical Document Security - The Conference on Optical Security and Counterfeit Detection V, San Francisco, CA, USA, 2016."},"title":"Banknote Cash Challenges met by advancing Low Cost Image Analysis Tools"},{"department":[{"_id":"DEP5023"}],"author":[{"last_name":"Pfeifer","full_name":"Pfeifer, Anton","id":"52097","first_name":"Anton"},{"last_name":"Gillich","first_name":"Eugen","id":"1706","full_name":"Gillich, Eugen"},{"orcid":"0000-0002-3325-7887","full_name":"Lohweg, Volker","id":"1804","last_name":"Lohweg","first_name":"Volker"},{"id":"2128","first_name":"Johannes","full_name":"Schaede, Johannes","last_name":"Schaede"}],"year":2016,"abstract":[{"lang":"eng","text":"Today, a major part of counterfeits is produced by commercial offset printing machines. The counterfeiters use mainlyraster printing (rosette printing). Our approach aims at analysing the banknotes for the presence of commercial printingprocedures by means of intrinsic features. For this purpose, the images are analysed in view to periodic printing patternsby means of the Discrete Fourier Transformation (DFT). The typical raster frequencies are detected. The rosette pattern isseparated by suppression of the remaining image frequencies and the subsequent back-transformation."}],"status":"public","title":"Detection of Commercial Offset Printing in Counterfeited Banknotes","citation":{"ieee":"A. Pfeifer, E. Gillich, V. Lohweg, and J. Schaede, “Detection of Commercial Offset Printing in Counterfeited Banknotes,” in Optical Document Security - The Conference on Optical Security and Counterfeit Detection V, 2016.","ama":"Pfeifer A, Gillich E, Lohweg V, Schaede J. Detection of Commercial Offset Printing in Counterfeited Banknotes. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection V. San Francisco, CA, USA; 2016.","short":"A. Pfeifer, E. Gillich, V. Lohweg, J. Schaede, in: Optical Document Security - The Conference on Optical Security and Counterfeit Detection V, San Francisco, CA, USA, 2016.","din1505-2-1":"Pfeifer, Anton ; Gillich, Eugen ; Lohweg, Volker ; Schaede, Johannes: Detection of Commercial Offset Printing in Counterfeited Banknotes. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection V. San Francisco, CA, USA, 2016","chicago-de":"Pfeifer, Anton, Eugen Gillich, Volker Lohweg und Johannes Schaede. 2016. Detection of Commercial Offset Printing in Counterfeited Banknotes. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection V. San Francisco, CA, USA.","apa":"Pfeifer, A., Gillich, E., Lohweg, V., & Schaede, J. (2016). Detection of Commercial Offset Printing in Counterfeited Banknotes. In Optical Document Security - The Conference on Optical Security and Counterfeit Detection V. San Francisco, CA, USA.","chicago":"Pfeifer, Anton, Eugen Gillich, Volker Lohweg, and Johannes Schaede. “Detection of Commercial Offset Printing in Counterfeited Banknotes.” In Optical Document Security - The Conference on Optical Security and Counterfeit Detection V. San Francisco, CA, USA, 2016.","van":"Pfeifer A, Gillich E, Lohweg V, Schaede J. Detection of Commercial Offset Printing in Counterfeited Banknotes. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection V. San Francisco, CA, USA; 2016.","ufg":"Pfeifer, Anton et. al. (2016): Detection of Commercial Offset Printing in Counterfeited Banknotes, in: Optical Document Security - The Conference on Optical Security and Counterfeit Detection V, San Francisco, CA, USA.","bjps":"Pfeifer A et al. (2016) Detection of Commercial Offset Printing in Counterfeited Banknotes. Optical Document Security - The Conference on Optical Security and Counterfeit Detection V. San Francisco, CA, USA.","mla":"Pfeifer, Anton, et al. “Detection of Commercial Offset Printing in Counterfeited Banknotes.” Optical Document Security - The Conference on Optical Security and Counterfeit Detection V, 2016.","havard":"A. Pfeifer, E. Gillich, V. Lohweg, J. Schaede, Detection of Commercial Offset Printing in Counterfeited Banknotes, in: Optical Document Security - The Conference on Optical Security and Counterfeit Detection V, San Francisco, CA, USA, 2016."},"language":[{"iso":"eng"}],"place":"San Francisco, CA, USA","_id":"2042","type":"conference","date_created":"2019-11-26T14:43:23Z","publication":"Optical Document Security - The Conference on Optical Security and Counterfeit Detection V","date_updated":"2023-03-15T13:49:38Z","user_id":"74004"},{"_id":"2043","place":"Bochum","language":[{"iso":"eng"}],"user_id":"68554","date_updated":"2023-03-15T13:49:38Z","publication":"Fakultätskolloquium Elektrotechnik und Informationstechnik , Ruhr-Universität Bochum (eingeladener Vortrag)","date_created":"2019-11-26T14:43:24Z","type":"conference","status":"public","year":2016,"author":[{"last_name":"Lohweg","first_name":"Volker","full_name":"Lohweg, Volker","id":"1804","orcid":"0000-0002-3325-7887"}],"department":[{"_id":"DEP5023"}],"citation":{"short":"V. Lohweg, in: Fakultätskolloquium Elektrotechnik Und Informationstechnik , Ruhr-Universität Bochum (Eingeladener Vortrag), Bochum, 2016.","chicago-de":"Lohweg, Volker. 2016. How will banknotes change in the next 20 years - towards smart Banknotes? In: Fakultätskolloquium Elektrotechnik und Informationstechnik , Ruhr-Universität Bochum (eingeladener Vortrag). Bochum.","din1505-2-1":"Lohweg, Volker: How will banknotes change in the next 20 years - towards smart Banknotes? In: Fakultätskolloquium Elektrotechnik und Informationstechnik , Ruhr-Universität Bochum (eingeladener Vortrag). Bochum, 2016","apa":"Lohweg, V. (2016). How will banknotes change in the next 20 years - towards smart Banknotes? In Fakultätskolloquium Elektrotechnik und Informationstechnik , Ruhr-Universität Bochum (eingeladener Vortrag). Bochum.","chicago":"Lohweg, Volker. “How Will Banknotes Change in the next 20 Years - towards Smart Banknotes?” In Fakultätskolloquium Elektrotechnik Und Informationstechnik , Ruhr-Universität Bochum (Eingeladener Vortrag). Bochum, 2016.","van":"Lohweg V. How will banknotes change in the next 20 years - towards smart Banknotes? In: Fakultätskolloquium Elektrotechnik und Informationstechnik , Ruhr-Universität Bochum (eingeladener Vortrag). Bochum; 2016.","mla":"Lohweg, Volker. “How Will Banknotes Change in the next 20 Years - towards Smart Banknotes?” Fakultätskolloquium Elektrotechnik Und Informationstechnik , Ruhr-Universität Bochum (Eingeladener Vortrag), 2016.","bjps":"Lohweg V (2016) How Will Banknotes Change in the next 20 Years - towards Smart Banknotes? Fakultätskolloquium Elektrotechnik Und Informationstechnik , Ruhr-Universität Bochum (Eingeladener Vortrag). Bochum.","havard":"V. Lohweg, How will banknotes change in the next 20 years - towards smart Banknotes?, in: Fakultätskolloquium Elektrotechnik Und Informationstechnik , Ruhr-Universität Bochum (Eingeladener Vortrag), Bochum, 2016.","ufg":"Lohweg, Volker (2016): How will banknotes change in the next 20 years - towards smart Banknotes?, in: Fakultätskolloquium Elektrotechnik und Informationstechnik , Ruhr-Universität Bochum (eingeladener Vortrag), Bochum.","ieee":"V. Lohweg, “How will banknotes change in the next 20 years - towards smart Banknotes?,” in Fakultätskolloquium Elektrotechnik und Informationstechnik , Ruhr-Universität Bochum (eingeladener Vortrag), 2016.","ama":"Lohweg V. How will banknotes change in the next 20 years - towards smart Banknotes? In: Fakultätskolloquium Elektrotechnik Und Informationstechnik , Ruhr-Universität Bochum (Eingeladener Vortrag). Bochum; 2016."},"title":"How will banknotes change in the next 20 years - towards smart Banknotes?"},{"language":[{"iso":"eng"}],"_id":"2044","doi":"10.3390/s16111798","article_number":"1798","oa":"1","user_id":"68554","date_updated":"2023-03-15T13:49:38Z","publication":"Sensors","publication_identifier":{"issn":["1424-8220"]},"date_created":"2019-11-26T15:03:36Z","type":"journal_article","status":"public","year":2016,"author":[{"last_name":"Mönks","full_name":"Mönks, Uwe","id":"1825","first_name":"Uwe"},{"first_name":"Helene","id":"46416","last_name":"Dörksen","full_name":"Dörksen, Helene"},{"id":"1804","first_name":"Volker","last_name":"Lohweg","full_name":"Lohweg, Volker","orcid":"0000-0002-3325-7887"},{"first_name":"Michael","full_name":"Hübner, Michael","last_name":"Hübner"}],"main_file_link":[{"url":"https://www.mdpi.com/1424-8220/16/11/1798","open_access":"1"}],"department":[{"_id":"DEP5023"}],"abstract":[{"text":"Sensors, and also actuators or external sources such as databases, serve as data sources in order to realise condition monitoring of industrial applications or the acquisition of characteristic parameters like production speed or reject rate. Modern facilities create such a large amount of complex data that a machine operator is unable to comprehend and process the information contained in the data. Thus, information fusion mechanisms gain increasing importance. Besides the management of large amounts of data, further challenges towards the fusion algorithms arise from epistemic uncertainties (incomplete knowledge) in the input signals as well as conflicts between them. These aspects must be considered during information processing to obtain reliable results, which are in accordance with the real world. The analysis of the scientific state of the art shows that current solutions fulfil said requirements at most only partly. This article proposes the multilayered information fusion system MACRO (multilayer attribute-based conflict-reducing observation) employing the μBalTLCS (fuzzified balanced two-layer conflict solving) fusion algorithm to reduce the impact of conflicts on the fusion result. The performance of the contribution is shown by its evaluation in the scope of a machine condition monitoring application under laboratory conditions. Here, the MACRO system yields the best results compared to state-of-the-art fusion mechanisms. The utilised data is published and freely accessible.","lang":"eng"}],"citation":{"short":"U. Mönks, H. Dörksen, V. Lohweg, M. Hübner, Sensors (2016).","din1505-2-1":"Mönks, Uwe ; Dörksen, Helene ; Lohweg, Volker ; Hübner, Michael: Information Fusion of Conflicting Input Data. In: Sensors (2016)","chicago-de":"Mönks, Uwe, Helene Dörksen, Volker Lohweg und Michael Hübner. 2016. Information Fusion of Conflicting Input Data. Sensors. doi:10.3390/s16111798, .","ama":"Mönks U, Dörksen H, Lohweg V, Hübner M. Information Fusion of Conflicting Input Data. Sensors. 2016. doi:10.3390/s16111798","van":"Mönks U, Dörksen H, Lohweg V, Hübner M. Information Fusion of Conflicting Input Data. Sensors. 2016;","mla":"Mönks, Uwe, et al. “Information Fusion of Conflicting Input Data.” Sensors, 1798, 2016, doi:10.3390/s16111798.","bjps":"Mönks U et al. (2016) Information Fusion of Conflicting Input Data. Sensors.","havard":"U. Mönks, H. Dörksen, V. Lohweg, M. Hübner, Information Fusion of Conflicting Input Data, Sensors. (2016).","ufg":"Mönks, Uwe et. al. (2016): Information Fusion of Conflicting Input Data, in: Sensors.","ieee":"U. Mönks, H. Dörksen, V. Lohweg, and M. Hübner, “Information Fusion of Conflicting Input Data,” Sensors, 2016.","apa":"Mönks, U., Dörksen, H., Lohweg, V., & Hübner, M. (2016). Information Fusion of Conflicting Input Data. Sensors. https://doi.org/10.3390/s16111798","chicago":"Mönks, Uwe, Helene Dörksen, Volker Lohweg, and Michael Hübner. “Information Fusion of Conflicting Input Data.” Sensors, 2016. https://doi.org/10.3390/s16111798."},"publication_status":"published","title":"Information Fusion of Conflicting Input Data"},{"citation":{"ieee":"M. Hölscher, T. Nolte, J. Zapp, A. Stiebing, R. Lautenschläger, and M. Upmann, “Verarbeitungseignung von Eberfleisch,” presented at the GDL-Kongress, Lemgo, 2016.","apa":"Hölscher, M., Nolte, T., Zapp, J., Stiebing, A., Lautenschläger, R., & Upmann, M. (2016). Verarbeitungseignung von Eberfleisch. GDL-Kongress, Lemgo.","chicago":"Hölscher, Maike, T. Nolte, Jürgen Zapp, Achim Stiebing, Ralf Lautenschläger, and Matthias Upmann. “Verarbeitungseignung von Eberfleisch,” 2016.","ama":"Hölscher M, Nolte T, Zapp J, Stiebing A, Lautenschläger R, Upmann M. Verarbeitungseignung von Eberfleisch. In: ; 2016.","van":"Hölscher M, Nolte T, Zapp J, Stiebing A, Lautenschläger R, Upmann M. Verarbeitungseignung von Eberfleisch. In 2016.","havard":"M. Hölscher, T. Nolte, J. Zapp, A. Stiebing, R. Lautenschläger, M. Upmann, Verarbeitungseignung von Eberfleisch, in: 2016.","bjps":"Hölscher M et al. (2016) Verarbeitungseignung von Eberfleisch.","mla":"Hölscher, Maike, et al. Verarbeitungseignung von Eberfleisch. 2016.","ufg":"Hölscher, Maike u. a.: Verarbeitungseignung von Eberfleisch, in: o. Hg.: o. O. 2016.","short":"M. Hölscher, T. Nolte, J. Zapp, A. Stiebing, R. Lautenschläger, M. Upmann, in: 2016.","chicago-de":"Hölscher, Maike, T. Nolte, Jürgen Zapp, Achim Stiebing, Ralf Lautenschläger und Matthias Upmann. 2016. Verarbeitungseignung von Eberfleisch. In: .","din1505-2-1":"Hölscher, Maike ; Nolte, T. ; Zapp, Jürgen ; Stiebing, Achim ; Lautenschläger, Ralf ; Upmann, Matthias: Verarbeitungseignung von Eberfleisch. In: , 2016"},"publication_status":"published","title":"Verarbeitungseignung von Eberfleisch","status":"public","year":"2016","author":[{"full_name":"Hölscher, Maike","first_name":"Maike","last_name":"Hölscher","id":"12647"},{"first_name":"T.","full_name":"Nolte, T.","last_name":"Nolte"},{"id":"12568","first_name":"Jürgen","last_name":"Zapp","full_name":"Zapp, Jürgen"},{"first_name":"Achim","full_name":"Stiebing, Achim","id":"12235","last_name":"Stiebing"},{"first_name":"Ralf","last_name":"Lautenschläger","id":"62087","full_name":"Lautenschläger, Ralf"},{"last_name":"Upmann","first_name":"Matthias","full_name":"Upmann, Matthias","id":"12666"}],"department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"conference":{"start_date":"2016-10-20","end_date":"2016-10-22","name":"GDL-Kongress","location":"Lemgo"},"abstract":[{"text":"Vortrag und Tagungsbandbeitrag","lang":"ger"}],"user_id":"83778","date_updated":"2024-05-17T12:45:26Z","date_created":"2020-05-27T07:01:41Z","type":"conference","language":[{"iso":"ger"}],"_id":"2615"},{"title":"Umlaufgetriebe","citation":{"ama":"Schulte T. Umlaufgetriebe. 2016.","ieee":"T. Schulte, “Umlaufgetriebe.” 2016.","ufg":"Schulte, Thomas (2016): Umlaufgetriebe.","mla":"Schulte, Thomas. Umlaufgetriebe. 2016.","havard":"T. Schulte, Umlaufgetriebe, (2016).","bjps":"Schulte T (2016) Umlaufgetriebe.","van":"Schulte T. Umlaufgetriebe. 2016.","chicago":"Schulte, Thomas. “Umlaufgetriebe,” 2016.","apa":"Schulte, T. (2016). Umlaufgetriebe.","chicago-de":"Schulte, Thomas. 2016. Umlaufgetriebe.","din1505-2-1":"Schulte, Thomas: Umlaufgetriebe (2016)","short":"T. Schulte, (2016)."},"year":2016,"author":[{"full_name":"Schulte, Thomas","id":"46242","first_name":"Thomas","last_name":"Schulte"}],"department":[{"_id":"DEP6020"}],"publication_date":"2016-11-10","status":"public","type":"patent","date_created":"2020-11-19T11:56:35Z","user_id":"74004","date_updated":"2023-03-15T13:49:49Z","ipc":"F16H37/04 ; F16H57/10","ipn":"DE102015005771","_id":"3970"},{"abstract":[{"text":"Plug-in hybrid electric vehicles are developed to reduce the fuel consumption and the emission of carbon dioxide. Besides the series, parallel and power split configurations as commonly used for conventional hybrid electric vehicles, multimode transmissions are in particular used for plug-in hybrid electric vehicles, which enable to switch between different modes like parallel or series operation of combustion engine and electric motor. Based on cost efficient configurations of multimode transmissions, improved concepts have already been discussed and presented. These concepts comprise novel structures and multi-speed operation for the combustion engine or the electric motor, respectively. For improving the fuel and energy consumption, a simulation based optimization of a multimode transmission is applied. Since the development of corresponding transmission models is a time-consuming and error-prone task, a method for an automated generation of transmission models is present in this contribution. The generated transmission models are integrated into an overall stationary powertrain model, which is used to optimize an operating strategy and the gear ratios of a multimode transmission with respect to fuel and energy consumption. The optimization is applied to a two and a three speed transmission for the internal combustion engine and to a two speed transmission for the electric motor. Afterwards, the optimization results as well as the fuel and energy saving results are presented.","lang":"eng"}],"department":[{"_id":"DEP6020"}],"conference":{"location":"Busan, South Korea ","name":"36th FISITA World Automotive Congress (FISITA 2016)","end_date":"2016-09-30","start_date":"2016-09-26"},"author":[{"full_name":"Geng, Stefan","first_name":"Stefan","last_name":"Geng","id":"43696"},{"full_name":"Herber, Sebastian","last_name":"Herber","first_name":"Sebastian","id":"74783"},{"first_name":"Willy","id":"59298","last_name":"Hildebrandt","full_name":"Hildebrandt, Willy"},{"first_name":"Thomas","full_name":"Schulte, Thomas","last_name":"Schulte","id":"46242"}],"year":2016,"publisher":"Curran Associates, Inc.","status":"public","title":"Powertrain Simulation and Optimization of a Multimode Transmission","publication_status":"published","citation":{"din1505-2-1":"Geng, Stefan ; Herber, Sebastian ; Hildebrandt, Willy ; Schulte, Thomas: Powertrain Simulation and Optimization of a Multimode Transmission. In: 36th FISITA World Automotive Congress (FISITA 2016) : Creative Thinking for Future Automobiles. Red Hook : Curran Associates, Inc., 2016","chicago-de":"Geng, Stefan, Sebastian Herber, Willy Hildebrandt und Thomas Schulte. 2016. Powertrain Simulation and Optimization of a Multimode Transmission. In: 36th FISITA World Automotive Congress (FISITA 2016) : Creative Thinking for Future Automobiles. Red Hook: Curran Associates, Inc.","short":"S. Geng, S. Herber, W. Hildebrandt, T. Schulte, in: 36th FISITA World Automotive Congress (FISITA 2016) : Creative Thinking for Future Automobiles, Curran Associates, Inc., Red Hook, 2016.","chicago":"Geng, Stefan, Sebastian Herber, Willy Hildebrandt, and Thomas Schulte. “Powertrain Simulation and Optimization of a Multimode Transmission.” In 36th FISITA World Automotive Congress (FISITA 2016) : Creative Thinking for Future Automobiles. Red Hook: Curran Associates, Inc., 2016.","apa":"Geng, S., Herber, S., Hildebrandt, W., & Schulte, T. (2016). Powertrain Simulation and Optimization of a Multimode Transmission. In 36th FISITA World Automotive Congress (FISITA 2016) : Creative Thinking for Future Automobiles. Red Hook: Curran Associates, Inc.","ufg":"Geng, Stefan et. al. (2016): Powertrain Simulation and Optimization of a Multimode Transmission, in: 36th FISITA World Automotive Congress (FISITA 2016) : Creative Thinking for Future Automobiles, Red Hook.","bjps":"Geng S et al. (2016) Powertrain Simulation and Optimization of a Multimode Transmission. 36th FISITA World Automotive Congress (FISITA 2016) : Creative Thinking for Future Automobiles. Red Hook: Curran Associates, Inc.","havard":"S. Geng, S. Herber, W. Hildebrandt, T. Schulte, Powertrain Simulation and Optimization of a Multimode Transmission, in: 36th FISITA World Automotive Congress (FISITA 2016) : Creative Thinking for Future Automobiles, Curran Associates, Inc., Red Hook, 2016.","mla":"Geng, Stefan, et al. “Powertrain Simulation and Optimization of a Multimode Transmission.” 36th FISITA World Automotive Congress (FISITA 2016) : Creative Thinking for Future Automobiles, Curran Associates, Inc., 2016.","van":"Geng S, Herber S, Hildebrandt W, Schulte T. Powertrain Simulation and Optimization of a Multimode Transmission. In: 36th FISITA World Automotive Congress (FISITA 2016) : Creative Thinking for Future Automobiles. Red Hook: Curran Associates, Inc.; 2016.","ieee":"S. Geng, S. Herber, W. Hildebrandt, and T. Schulte, “Powertrain Simulation and Optimization of a Multimode Transmission,” in 36th FISITA World Automotive Congress (FISITA 2016) : Creative Thinking for Future Automobiles, Busan, South Korea , 2016.","ama":"Geng S, Herber S, Hildebrandt W, Schulte T. Powertrain Simulation and Optimization of a Multimode Transmission. In: 36th FISITA World Automotive Congress (FISITA 2016) : Creative Thinking for Future Automobiles. Red Hook: Curran Associates, Inc.; 2016."},"_id":"4021","language":[{"iso":"eng"}],"place":"Red Hook","date_created":"2020-11-23T17:53:44Z","type":"conference","publication_identifier":{"isbn":["978-1-5108-6958-5"]},"publication":"36th FISITA World Automotive Congress (FISITA 2016) : Creative Thinking for Future Automobiles","date_updated":"2023-03-15T13:49:50Z","user_id":"74004"},{"publication_identifier":{"isbn":["978-1-5108-6958-5"]},"publication":"36th FISITA World Automotive Congress (FISITA 2016) : Creative Thinking for Future Automobiles","date_created":"2020-11-23T17:53:44Z","type":"conference","user_id":"74004","date_updated":"2023-03-15T13:49:50Z","_id":"4022","place":"Red Hook","language":[{"iso":"eng"}],"title":"“Phevplus” - Efficient Plug-in- Hybrid Systems with MRF-Coupling Technology","citation":{"van":"Herber S, Horst J, Gassmann T, Hldebrandt W, Haupt J, Abbenhaus M, et al. “Phevplus” - Efficient Plug-in- Hybrid Systems with MRF-Coupling Technology. In: 36th FISITA World Automotive Congress (FISITA 2016) : Creative Thinking for Future Automobiles. Red Hook: Curran Associates, Inc.; 2016.","ufg":"Herber, Sebastian et. al. (2016): “Phevplus” - Efficient Plug-in- Hybrid Systems with MRF-Coupling Technology, in: 36th FISITA World Automotive Congress (FISITA 2016) : Creative Thinking for Future Automobiles, Red Hook.","bjps":"Herber S et al. (2016) “Phevplus” - Efficient Plug-in- Hybrid Systems with MRF-Coupling Technology. 36th FISITA World Automotive Congress (FISITA 2016) : Creative Thinking for Future Automobiles. Red Hook: Curran Associates, Inc.","havard":"S. Herber, J. Horst, T. Gassmann, W. Hldebrandt, J. Haupt, M. Abbenhaus, M. Werkhausen, T. Schulte, J. Maas, S. Geng, C. Hegger, “Phevplus” - Efficient Plug-in- Hybrid Systems with MRF-Coupling Technology, in: 36th FISITA World Automotive Congress (FISITA 2016) : Creative Thinking for Future Automobiles, Curran Associates, Inc., Red Hook, 2016.","mla":"Herber, Sebastian, et al. “‘Phevplus’ - Efficient Plug-in- Hybrid Systems with MRF-Coupling Technology.” 36th FISITA World Automotive Congress (FISITA 2016) : Creative Thinking for Future Automobiles, Curran Associates, Inc., 2016.","apa":"Herber, S., Horst, J., Gassmann, T., Hldebrandt, W., Haupt, J., Abbenhaus, M., … Hegger, C. (2016). “Phevplus” - Efficient Plug-in- Hybrid Systems with MRF-Coupling Technology. In 36th FISITA World Automotive Congress (FISITA 2016) : Creative Thinking for Future Automobiles. Red Hook: Curran Associates, Inc.","chicago":"Herber, Sebastian, J. Horst, T. Gassmann, W. Hldebrandt, J. Haupt, M. Abbenhaus, M. Werkhausen, et al. “‘Phevplus’ - Efficient Plug-in- Hybrid Systems with MRF-Coupling Technology.” In 36th FISITA World Automotive Congress (FISITA 2016) : Creative Thinking for Future Automobiles. Red Hook: Curran Associates, Inc., 2016.","short":"S. Herber, J. Horst, T. Gassmann, W. Hldebrandt, J. Haupt, M. Abbenhaus, M. Werkhausen, T. Schulte, J. Maas, S. Geng, C. Hegger, in: 36th FISITA World Automotive Congress (FISITA 2016) : Creative Thinking for Future Automobiles, Curran Associates, Inc., Red Hook, 2016.","chicago-de":"Herber, Sebastian, J. Horst, T. Gassmann, W. Hldebrandt, J. Haupt, M. Abbenhaus, M. Werkhausen, u. a. 2016. “Phevplus” - Efficient Plug-in- Hybrid Systems with MRF-Coupling Technology. In: 36th FISITA World Automotive Congress (FISITA 2016) : Creative Thinking for Future Automobiles. Red Hook: Curran Associates, Inc.","din1505-2-1":"Herber, Sebastian ; Horst, J. ; Gassmann, T. ; Hldebrandt, W. ; Haupt, J. ; Abbenhaus, M. ; Werkhausen, M. ; Schulte, Thomas ; u. a.: “Phevplus” - Efficient Plug-in- Hybrid Systems with MRF-Coupling Technology. In: 36th FISITA World Automotive Congress (FISITA 2016) : Creative Thinking for Future Automobiles. Red Hook : Curran Associates, Inc., 2016","ama":"Herber S, Horst J, Gassmann T, et al. “Phevplus” - Efficient Plug-in- Hybrid Systems with MRF-Coupling Technology. In: 36th FISITA World Automotive Congress (FISITA 2016) : Creative Thinking for Future Automobiles. Red Hook: Curran Associates, Inc.; 2016.","ieee":"S. Herber et al., “‘Phevplus’ - Efficient Plug-in- Hybrid Systems with MRF-Coupling Technology,” in 36th FISITA World Automotive Congress (FISITA 2016) : Creative Thinking for Future Automobiles, Busan, South Korea , 2016."},"publication_status":"published","author":[{"first_name":"Sebastian","full_name":"Herber, Sebastian","last_name":"Herber","id":"74783"},{"first_name":"J.","last_name":"Horst","full_name":"Horst, J."},{"first_name":"T.","full_name":"Gassmann, T.","last_name":"Gassmann"},{"first_name":"W.","full_name":"Hldebrandt, W.","last_name":"Hldebrandt"},{"first_name":"J.","last_name":"Haupt","full_name":"Haupt, J."},{"last_name":"Abbenhaus","first_name":"M.","full_name":"Abbenhaus, M."},{"full_name":"Werkhausen, M.","first_name":"M.","last_name":"Werkhausen"},{"first_name":"Thomas","last_name":"Schulte","full_name":"Schulte, Thomas","id":"46242"},{"id":"1827","full_name":"Maas, Jürgen","last_name":"Maas","first_name":"Jürgen"},{"full_name":"Geng, Stefan","last_name":"Geng","first_name":"Stefan","id":"43696"},{"first_name":"C.","last_name":"Hegger","full_name":"Hegger, C."}],"year":2016,"conference":{"end_date":"2016-09-30","start_date":"2016-09-26","location":"Busan, South Korea ","name":"36th FISITA World Automotive Congress (FISITA 2016)"},"department":[{"_id":"DEP6020"}],"publisher":"Curran Associates, Inc.","status":"public"},{"_id":"4023","language":[{"iso":"eng"}],"user_id":"74004","date_updated":"2023-03-15T13:49:50Z","date_created":"2020-11-23T18:11:43Z","type":"conference","publisher":"IEEE","status":"public","page":"1 -10","abstract":[{"text":"Modular power inverter systems for auxiliary drives in utility vehicles can meet various different customer requirements. A model based approach can be used for validating the thermal design of those systems in any suitable modular configuration. This contribution is focused on an equivalent lumped thermal network model for a modular inverter system on a given heat sink concept. The proposed network representation is based on spatial splitting of the heat sink geometry whereby the lumped network elements are parametrized by means of the heat sink geometry. Since the proposed network is easy and straightforward, a minimum of variables are introduced to adjust the temperature results empirically with FEM results on certain reference operation points. Furthermore, modularity is considered due to the coolant and therefore, customer specific placement of modules can be investigated. Finally, the proposed model is compared with FEM results of a worst case system configuration, the influence of the introduced adjustment variables is shown and further validation results with thermal measurements and FEM results of different system configurations are given.","lang":"eng"}],"year":2016,"author":[{"first_name":"M.","full_name":"Brose, M.","last_name":"Brose"},{"first_name":"C.","full_name":"Düerkop, C.","last_name":"Düerkop"},{"first_name":"Thomas","last_name":"Schulte","id":"46242","full_name":"Schulte, Thomas"}],"department":[{"_id":"DEP6020"}],"conference":{"start_date":"2016-09-05","end_date":"2016-09-09","location":"Karlsruhe","name":"18th European Conference on Power Electronics and Applications (EPE'16 ECCE Europe)"},"citation":{"short":"M. Brose, C. Düerkop, T. Schulte, in: IEEE, 2016, pp. 1–10.","din1505-2-1":"Brose, M. ; Düerkop, C. ; Schulte, Thomas: Model based Thermal Evaluation of a Modular Power Inverter System. In: : IEEE, 2016, S. 1–10","chicago-de":"Brose, M., C. Düerkop und Thomas Schulte. 2016. Model based Thermal Evaluation of a Modular Power Inverter System. In: , 1–10. IEEE.","van":"Brose M, Düerkop C, Schulte T. Model based Thermal Evaluation of a Modular Power Inverter System. In IEEE; 2016. p. 1–10.","bjps":"Brose M, Düerkop C and Schulte T (2016) Model Based Thermal Evaluation of a Modular Power Inverter System. IEEE, pp. 1–10.","mla":"Brose, M., et al. Model Based Thermal Evaluation of a Modular Power Inverter System. IEEE, 2016, pp. 1–10.","havard":"M. Brose, C. Düerkop, T. Schulte, Model based Thermal Evaluation of a Modular Power Inverter System, in: IEEE, 2016: pp. 1–10.","ufg":"Brose, M. et. al. (2016): Model based Thermal Evaluation of a Modular Power Inverter System, in: , S. 1–10.","apa":"Brose, M., Düerkop, C., & Schulte, T. (2016). Model based Thermal Evaluation of a Modular Power Inverter System (pp. 1–10). Presented at the 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe), Karlsruhe: IEEE.","chicago":"Brose, M., C. Düerkop, and Thomas Schulte. “Model Based Thermal Evaluation of a Modular Power Inverter System,” 1–10. IEEE, 2016.","ama":"Brose M, Düerkop C, Schulte T. Model based Thermal Evaluation of a Modular Power Inverter System. In: IEEE; 2016:1-10.","ieee":"M. Brose, C. Düerkop, and T. Schulte, “Model based Thermal Evaluation of a Modular Power Inverter System,” presented at the 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe), Karlsruhe, 2016, pp. 1–10."},"title":"Model based Thermal Evaluation of a Modular Power Inverter System"},{"type":"conference","date_created":"2020-11-23T18:20:57Z","publication_identifier":{"eissn":["2166-9546 "]},"date_updated":"2023-03-15T13:49:50Z","user_id":"74004","_id":"4024","language":[{"iso":"eng"}],"title":"Electrodynamical modelling of bidirectional fuel cell systems for HIL simulations of combined grid systems","publication_status":"published","citation":{"chicago-de":"Griese, Martin, Thomas Pawlik, Thomas Schulte und Jürgen Maas. 2016. Electrodynamical modelling of bidirectional fuel cell systems for HIL simulations of combined grid systems. In: , 186–191. IEEE.","din1505-2-1":"Griese, Martin ; Pawlik, Thomas ; Schulte, Thomas ; Maas, Jürgen: Electrodynamical modelling of bidirectional fuel cell systems for HIL simulations of combined grid systems. In: : IEEE, 2016, S. 186–191","short":"M. Griese, T. Pawlik, T. Schulte, J. Maas, in: IEEE, 2016, pp. 186–191.","chicago":"Griese, Martin, Thomas Pawlik, Thomas Schulte, and Jürgen Maas. “Electrodynamical Modelling of Bidirectional Fuel Cell Systems for HIL Simulations of Combined Grid Systems,” 186–91. IEEE, 2016.","ieee":"M. Griese, T. Pawlik, T. Schulte, and J. Maas, “Electrodynamical modelling of bidirectional fuel cell systems for HIL simulations of combined grid systems,” presented at the 10th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG), Bydgoszcz, Poland , 2016, pp. 186–191.","apa":"Griese, M., Pawlik, T., Schulte, T., & Maas, J. (2016). Electrodynamical modelling of bidirectional fuel cell systems for HIL simulations of combined grid systems (pp. 186–191). Presented at the 10th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG), Bydgoszcz, Poland : IEEE.","havard":"M. Griese, T. Pawlik, T. Schulte, J. Maas, Electrodynamical modelling of bidirectional fuel cell systems for HIL simulations of combined grid systems, in: IEEE, 2016: pp. 186–191.","bjps":"Griese M et al. (2016) Electrodynamical Modelling of Bidirectional Fuel Cell Systems for HIL Simulations of Combined Grid Systems. IEEE, pp. 186–191.","mla":"Griese, Martin, et al. Electrodynamical Modelling of Bidirectional Fuel Cell Systems for HIL Simulations of Combined Grid Systems. IEEE, 2016, pp. 186–91.","ufg":"Griese, Martin et. al. (2016): Electrodynamical modelling of bidirectional fuel cell systems for HIL simulations of combined grid systems, in: , S. 186–191.","ama":"Griese M, Pawlik T, Schulte T, Maas J. Electrodynamical modelling of bidirectional fuel cell systems for HIL simulations of combined grid systems. In: IEEE; 2016:186-191.","van":"Griese M, Pawlik T, Schulte T, Maas J. Electrodynamical modelling of bidirectional fuel cell systems for HIL simulations of combined grid systems. In IEEE; 2016. p. 186–91."},"abstract":[{"text":"For investigating combined grid systems including electrical, thermal and chemical grids, a scientific approach based on Hardware-in-the-loop simulation is carried out where models as virtual energy components are coupled with experimental facilities. In this contribution, a bidirectional fuel cell system is described in detail as a virtual energy component considering the bidirectional fuel cell, the power inverter and the local management. For modelling the bidirectional cell, the electrochemical domain is considered by a physical-based approach in a first step. Common models for unidirectional fuel cells or electrolysis cells are discussed regarding the applicability for bidirectional cells. Afterwards, the DC-DC converter as part of the overall power inverter is considered for modelling. A novel averaged model for the dual active bridge based on the method by Sanders and Verghese is presented. Finally, the overall model and local management of such systems are discussed.","lang":"eng"}],"department":[{"_id":"DEP6020"}],"conference":{"start_date":"2016-06-29","end_date":"2016-07-01","name":"10th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG)","location":"Bydgoszcz, Poland "},"year":2016,"main_file_link":[{"url":"https://ieeexplore.ieee.org/document/7544182"}],"author":[{"last_name":"Griese","id":"52308","full_name":"Griese, Martin","first_name":"Martin"},{"first_name":"Thomas","full_name":"Pawlik, Thomas","last_name":"Pawlik","id":"58915"},{"id":"46242","last_name":"Schulte","full_name":"Schulte, Thomas","first_name":"Thomas"},{"full_name":"Maas, Jürgen","first_name":"Jürgen","last_name":"Maas","id":"1827"}],"publisher":"IEEE","page":"186 - 191","status":"public"},{"date_updated":"2023-03-15T13:49:50Z","user_id":"74004","editor":[{"full_name":"Gühmann, C.","last_name":"Gühmann","first_name":"C."},{"full_name":"von Rüden, K.","last_name":"von Rüden","first_name":"K."}],"type":"book_chapter","date_created":"2020-11-23T18:35:00Z","publication_identifier":{"isbn":["978-3-319-32345-9"]},"publication":"Simulation and Testing for Vehicle Technology","language":[{"iso":"eng"}],"place":"Cham (Schweiz)","_id":"4025","publication_status":"published","citation":{"mla":"Kiffe, Axel, and Thomas Schulte. “Average Models for Hardware-in-the-Loop Simulation of Power Electronic Circuits.” Simulation and Testing for Vehicle Technology, edited by C. Gühmann and K. von Rüden, Springer International Publishing , 2016, pp. 319–42.","havard":"A. Kiffe, T. Schulte, Average Models for Hardware-in-the-Loop Simulation of Power Electronic Circuits, in: C. Gühmann, K. von Rüden (Eds.), Simulation and Testing for Vehicle Technology, Springer International Publishing , Cham (Schweiz), 2016: pp. 319–342.","bjps":"Kiffe A and Schulte T (2016) Average Models for Hardware-in-the-Loop Simulation of Power Electronic Circuits. In Gühmann C and von Rüden K (eds), Simulation and Testing for Vehicle Technology. Cham (Schweiz): Springer International Publishing , pp. 319–342.","ufg":"Kiffe, Axel/Schulte, Thomas (2016): Average Models for Hardware-in-the-Loop Simulation of Power Electronic Circuits, in: C. Gühmann/K. von Rüden (Hgg.): Simulation and Testing for Vehicle Technology, Cham (Schweiz), S. 319–342.","ama":"Kiffe A, Schulte T. Average Models for Hardware-in-the-Loop Simulation of Power Electronic Circuits. In: Gühmann C, von Rüden K, eds. Simulation and Testing for Vehicle Technology. Cham (Schweiz): Springer International Publishing ; 2016:319-342.","van":"Kiffe A, Schulte T. Average Models for Hardware-in-the-Loop Simulation of Power Electronic Circuits. In: Gühmann C, von Rüden K, editors. Simulation and Testing for Vehicle Technology. Cham (Schweiz): Springer International Publishing ; 2016. p. 319–42.","chicago":"Kiffe, Axel, and Thomas Schulte. “Average Models for Hardware-in-the-Loop Simulation of Power Electronic Circuits.” In Simulation and Testing for Vehicle Technology, edited by C. Gühmann and K. von Rüden, 319–42. Cham (Schweiz): Springer International Publishing , 2016.","ieee":"A. Kiffe and T. Schulte, “Average Models for Hardware-in-the-Loop Simulation of Power Electronic Circuits,” in Simulation and Testing for Vehicle Technology, C. Gühmann and K. von Rüden, Eds. Cham (Schweiz): Springer International Publishing , 2016, pp. 319–342.","apa":"Kiffe, A., & Schulte, T. (2016). Average Models for Hardware-in-the-Loop Simulation of Power Electronic Circuits. In C. Gühmann & K. von Rüden (Eds.), Simulation and Testing for Vehicle Technology (pp. 319–342). Cham (Schweiz): Springer International Publishing .","chicago-de":"Kiffe, Axel und Thomas Schulte. 2016. Average Models for Hardware-in-the-Loop Simulation of Power Electronic Circuits. In: Simulation and Testing for Vehicle Technology, hg. von C. Gühmann und K. von Rüden, 319–342. Cham (Schweiz): Springer International Publishing .","din1505-2-1":"Kiffe, Axel ; Schulte, Thomas: Average Models for Hardware-in-the-Loop Simulation of Power Electronic Circuits. In: Gühmann, C. ; von Rüden, K. (Hrsg.): Simulation and Testing for Vehicle Technology. Cham (Schweiz) : Springer International Publishing , 2016, S. 319–342","short":"A. Kiffe, T. Schulte, in: C. Gühmann, K. von Rüden (Eds.), Simulation and Testing for Vehicle Technology, Springer International Publishing , Cham (Schweiz), 2016, pp. 319–342."},"title":"Average Models for Hardware-in-the-Loop Simulation of Power Electronic Circuits","page":"319 - 342","status":"public","publisher":"Springer International Publishing ","conference":{"end_date":"2016-05-13","start_date":"2016-05-12","name":"7th Conference","location":"Berlin"},"department":[{"_id":"DEP6020"}],"author":[{"id":"59764","first_name":"Axel","last_name":"Kiffe","full_name":"Kiffe, Axel"},{"last_name":"Schulte","first_name":"Thomas","full_name":"Schulte, Thomas","id":"46242"}],"year":2016,"abstract":[{"lang":"eng","text":"Power electronic devices are growing in importance in automotive applications. Power converters are used in hybrid electric vehicles, but also in other vehicle applications like electric steering systems for example. For testing electronic equipment, hardware-in-the-loop (HIL) simulation is a today’s standard method in the automotive industry and other fields, as well. This contribution provides an overview of different average modeling methods for the real-time simulation of power electronics, which are necessary for hardware-in-the-loop simulation. The average models are described and evaluated by the criteria computation effort, algorithmizability, generalizability and platform usability. The results are summarized to give hints to development engineers for choosing a suitable modeling approach for hardware-in-the-loop simulation of their specific applications."}]},{"place":"Leinfelden-Echterdingen","language":[{"iso":"ger"}],"_id":"4188","user_id":"74004","date_updated":"2023-03-15T13:49:51Z","intvolume":" 138","publication":"Industrieanzeiger","publication_identifier":{"issn":["0019-9036"]},"type":"journal_article","date_created":"2020-12-08T09:41:33Z","status":"public","page":"48 - 50","publisher":"Konradin-Verl.","author":[{"last_name":"Bendig","full_name":"Bendig, Tom","first_name":"Tom"},{"first_name":"Holger","id":"1693","last_name":"Borcherding","full_name":"Borcherding, Holger"}],"year":2016,"department":[{"_id":"DEP6020"}],"issue":"11","volume":138,"citation":{"short":"T. Bendig, H. Borcherding, Industrieanzeiger 138 (2016) 48–50.","din1505-2-1":"Bendig, Tom ; Borcherding, Holger: Teillast vollständig beherrschen. Energieeffizienz im Fokus von Industrie 4.0. In: Industrieanzeiger Bd. 138. Leinfelden-Echterdingen, Konradin-Verl. (2016), Nr. 11, S. 48–50","chicago-de":"Bendig, Tom und Holger Borcherding. 2016. Teillast vollständig beherrschen. Energieeffizienz im Fokus von Industrie 4.0. Industrieanzeiger 138, Nr. 11: 48–50.","apa":"Bendig, T., & Borcherding, H. (2016). Teillast vollständig beherrschen. Energieeffizienz im Fokus von Industrie 4.0. Industrieanzeiger, 138(11), 48–50.","chicago":"Bendig, Tom, and Holger Borcherding. “Teillast vollständig beherrschen. Energieeffizienz im Fokus von Industrie 4.0.” Industrieanzeiger 138, no. 11 (2016): 48–50.","van":"Bendig T, Borcherding H. Teillast vollständig beherrschen. Energieeffizienz im Fokus von Industrie 4.0. Industrieanzeiger. 2016;138(11):48–50.","ufg":"Bendig, Tom/Borcherding, Holger (2016): Teillast vollständig beherrschen. Energieeffizienz im Fokus von Industrie 4.0, in: Industrieanzeiger 138 (11), S. 48–50.","bjps":"Bendig T and Borcherding H (2016) Teillast vollständig beherrschen. Energieeffizienz im Fokus von Industrie 4.0. Industrieanzeiger 138, 48–50.","havard":"T. Bendig, H. Borcherding, Teillast vollständig beherrschen. Energieeffizienz im Fokus von Industrie 4.0, Industrieanzeiger. 138 (2016) 48–50.","mla":"Bendig, Tom, and Holger Borcherding. “Teillast vollständig beherrschen. Energieeffizienz im Fokus von Industrie 4.0.” Industrieanzeiger, vol. 138, no. 11, Konradin-Verl., 2016, pp. 48–50.","ieee":"T. Bendig and H. Borcherding, “Teillast vollständig beherrschen. Energieeffizienz im Fokus von Industrie 4.0,” Industrieanzeiger, vol. 138, no. 11, pp. 48–50, 2016.","ama":"Bendig T, Borcherding H. Teillast vollständig beherrschen. Energieeffizienz im Fokus von Industrie 4.0. Industrieanzeiger. 2016;138(11):48-50."},"publication_status":"published","title":"Teillast vollständig beherrschen. Energieeffizienz im Fokus von Industrie 4.0"},{"volume":124,"citation":{"chicago-de":"Bendig, Tim und Holger Borcherding. 2016. Teillast beherrschen. Energieeffizienz für Industrie 4.0 betrachtet. Mechatronik. Design Entwicklung Integration 124, Nr. 6: 14–16.","din1505-2-1":"Bendig, Tim ; Borcherding, Holger: Teillast beherrschen. Energieeffizienz für Industrie 4.0 betrachtet. In: Mechatronik. Design Entwicklung Integration Bd. 124. München, Informationsgesellschaft Technik (2016), Nr. 6, S. 14–16","short":"T. Bendig, H. Borcherding, Mechatronik. Design Entwicklung Integration 124 (2016) 14–16.","chicago":"Bendig, Tim, and Holger Borcherding. “Teillast beherrschen. Energieeffizienz für Industrie 4.0 betrachtet.” Mechatronik. Design Entwicklung Integration 124, no. 6 (2016): 14–16.","ieee":"T. Bendig and H. Borcherding, “Teillast beherrschen. Energieeffizienz für Industrie 4.0 betrachtet,” Mechatronik. Design Entwicklung Integration, vol. 124, no. 6, pp. 14–16, 2016.","apa":"Bendig, T., & Borcherding, H. (2016). Teillast beherrschen. Energieeffizienz für Industrie 4.0 betrachtet. Mechatronik. Design Entwicklung Integration, 124(6), 14–16.","havard":"T. Bendig, H. Borcherding, Teillast beherrschen. Energieeffizienz für Industrie 4.0 betrachtet, Mechatronik. Design Entwicklung Integration. 124 (2016) 14–16.","mla":"Bendig, Tim, and Holger Borcherding. “Teillast beherrschen. Energieeffizienz für Industrie 4.0 betrachtet.” Mechatronik. Design Entwicklung Integration, vol. 124, no. 6, Informationsgesellschaft Technik, 2016, pp. 14–16.","bjps":"Bendig T and Borcherding H (2016) Teillast beherrschen. Energieeffizienz für Industrie 4.0 betrachtet. Mechatronik. Design Entwicklung Integration 124, 14–16.","ufg":"Bendig, Tim/Borcherding, Holger (2016): Teillast beherrschen. Energieeffizienz für Industrie 4.0 betrachtet, in: Mechatronik. Design Entwicklung Integration 124 (6), S. 14–16.","ama":"Bendig T, Borcherding H. Teillast beherrschen. Energieeffizienz für Industrie 4.0 betrachtet. Mechatronik Design Entwicklung Integration. 2016;124(6):14-16.","van":"Bendig T, Borcherding H. Teillast beherrschen. Energieeffizienz für Industrie 4.0 betrachtet. Mechatronik Design Entwicklung Integration. 2016;124(6):14–6."},"title":"Teillast beherrschen. Energieeffizienz für Industrie 4.0 betrachtet","page":"14 - 16","status":"public","year":2016,"author":[{"full_name":"Bendig, Tim","first_name":"Tim","last_name":"Bendig"},{"last_name":"Borcherding","first_name":"Holger","id":"1693","full_name":"Borcherding, Holger"}],"file_date_updated":"2020-12-08T09:51:47Z","date_updated":"2023-03-15T13:49:51Z","date_created":"2020-12-08T09:43:50Z","publication":"Mechatronik. Design Entwicklung Integration","publication_identifier":{"issn":["1867-2590"]},"language":[{"iso":"ger"}],"file":[{"access_level":"local","relation":"main_file","creator":"czr-e2t","date_updated":"2020-12-08T09:51:47Z","file_id":"4192","file_size":997956,"file_name":"Bending_Borcherding_WA.pdf","content_type":"application/pdf","date_created":"2020-12-08T09:51:47Z"}],"publication_status":"published","publisher":"Informationsgesellschaft Technik","issue":"6","department":[{"_id":"DEP6020"}],"ddc":["600"],"intvolume":" 124","user_id":"74004","type":"journal_article","_id":"4189","place":"München","has_accepted_license":"1"},{"publication_status":"published","citation":{"ama":"Austermann J, Stuckmann T, Borcherding H. High Efficient Flyback Converter with SiC-MOSFET. In: Mesago PCIM GmbH, ed. PCIM Europe 2016. Berlin: VDE-Verlag; 2016:1639-1646.","ieee":"J. Austermann, T. Stuckmann, and H. Borcherding, “High Efficient Flyback Converter with SiC-MOSFET,” in PCIM Europe 2016, Nuremberg, 2016, pp. 1639–1646.","ufg":"Austermann, Johann et. al. (2016): High Efficient Flyback Converter with SiC-MOSFET, in: Mesago PCIM GmbH (Hg.): PCIM Europe 2016, Berlin, S. 1639–1646.","havard":"J. Austermann, T. Stuckmann, H. Borcherding, High Efficient Flyback Converter with SiC-MOSFET, in: Mesago PCIM GmbH (Ed.), PCIM Europe 2016, VDE-Verlag, Berlin, 2016: pp. 1639–1646.","bjps":"Austermann J, Stuckmann T and Borcherding H (2016) High Efficient Flyback Converter with SiC-MOSFET. In Mesago PCIM GmbH (ed.), PCIM Europe 2016. Berlin: VDE-Verlag, pp. 1639–1646.","mla":"Austermann, Johann, et al. “High Efficient Flyback Converter with SiC-MOSFET.” PCIM Europe 2016, edited by Mesago PCIM GmbH, VDE-Verlag, 2016, pp. 1639–46.","van":"Austermann J, Stuckmann T, Borcherding H. High Efficient Flyback Converter with SiC-MOSFET. In: Mesago PCIM GmbH, editor. PCIM Europe 2016. Berlin: VDE-Verlag; 2016. p. 1639–46.","chicago":"Austermann, Johann, Tim Stuckmann, and Holger Borcherding. “High Efficient Flyback Converter with SiC-MOSFET.” In PCIM Europe 2016, edited by Mesago PCIM GmbH, 1639–46. Berlin: VDE-Verlag, 2016.","apa":"Austermann, J., Stuckmann, T., & Borcherding, H. (2016). High Efficient Flyback Converter with SiC-MOSFET. In Mesago PCIM GmbH (Ed.), PCIM Europe 2016 (pp. 1639–1646). Berlin: VDE-Verlag.","chicago-de":"Austermann, Johann, Tim Stuckmann und Holger Borcherding. 2016. High Efficient Flyback Converter with SiC-MOSFET. In: PCIM Europe 2016, hg. von Mesago PCIM GmbH, 1639–1646. Berlin: VDE-Verlag.","din1505-2-1":"Austermann, Johann ; Stuckmann, Tim ; Borcherding, Holger: High Efficient Flyback Converter with SiC-MOSFET. In: Mesago PCIM GmbH (Hrsg.): PCIM Europe 2016. Berlin : VDE-Verlag, 2016, S. 1639–1646","short":"J. Austermann, T. Stuckmann, H. Borcherding, in: Mesago PCIM GmbH (Ed.), PCIM Europe 2016, VDE-Verlag, Berlin, 2016, pp. 1639–1646."},"title":"High Efficient Flyback Converter with SiC-MOSFET","publisher":"VDE-Verlag","page":"1639 - 1646","status":"public","department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"conference":{"location":"Nuremberg","name":"International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management Proceedings","end_date":"2016-05-12","start_date":"2016-05-10"},"year":2016,"author":[{"first_name":"Johann","id":"42114","full_name":"Austermann, Johann","last_name":"Austermann"},{"full_name":"Stuckmann, Tim","id":"64800","last_name":"Stuckmann","first_name":"Tim"},{"id":"1693","full_name":"Borcherding, Holger","first_name":"Holger","last_name":"Borcherding"}],"corporate_editor":["Mesago PCIM GmbH"],"date_updated":"2023-03-15T13:49:51Z","user_id":"74004","date_created":"2020-12-10T14:09:16Z","type":"conference","publication":"PCIM Europe 2016","publication_identifier":{"isbn":["978-3-8007-4186-1"]},"_id":"4260","language":[{"iso":"eng"}],"place":"Berlin"},{"user_id":"74004","date_updated":"2023-03-15T13:49:51Z","publication":"2016 18th European Conference on Power Electronics and Applications (EPE'16 ECCE Europe)","date_created":"2020-12-14T13:51:06Z","type":"conference","_id":"4292","language":[{"iso":"eng"}],"citation":{"apa":"Austermann, J., Borcherding, H., Stichweh, H., & Grabs, V. (2016). High efficient modular drive system — An ideal approach for green intralogistics applications. In 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe). Karlsruhe, Germany : IEEE.","chicago":"Austermann, Johann, Holger Borcherding, H. Stichweh, and V. Grabs. “High Efficient Modular Drive System — An Ideal Approach for Green Intralogistics Applications.” In 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe). IEEE, 2016.","van":"Austermann J, Borcherding H, Stichweh H, Grabs V. High efficient modular drive system — An ideal approach for green intralogistics applications. In: 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe). IEEE; 2016.","bjps":"Austermann J et al. (2016) High Efficient Modular Drive System — An Ideal Approach for Green Intralogistics Applications. 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe). IEEE.","mla":"Austermann, Johann, et al. “High Efficient Modular Drive System — An Ideal Approach for Green Intralogistics Applications.” 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe), IEEE, 2016.","havard":"J. Austermann, H. Borcherding, H. Stichweh, V. Grabs, High efficient modular drive system — An ideal approach for green intralogistics applications, in: 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe), IEEE, 2016.","ufg":"Austermann, Johann et. al. (2016): High efficient modular drive system — An ideal approach for green intralogistics applications, in: 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe).","short":"J. Austermann, H. Borcherding, H. Stichweh, V. Grabs, in: 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe), IEEE, 2016.","din1505-2-1":"Austermann, Johann ; Borcherding, Holger ; Stichweh, H. ; Grabs, V.: High efficient modular drive system — An ideal approach for green intralogistics applications. In: 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe) : IEEE, 2016","chicago-de":"Austermann, Johann, Holger Borcherding, H. Stichweh und V. Grabs. 2016. High efficient modular drive system — An ideal approach for green intralogistics applications. In: 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe). IEEE.","ieee":"J. Austermann, H. Borcherding, H. Stichweh, and V. Grabs, “High efficient modular drive system — An ideal approach for green intralogistics applications,” in 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe), Karlsruhe, Germany , 2016.","ama":"Austermann J, Borcherding H, Stichweh H, Grabs V. High efficient modular drive system — An ideal approach for green intralogistics applications. In: 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe). IEEE; 2016."},"title":"High efficient modular drive system — An ideal approach for green intralogistics applications","publisher":"IEEE","status":"public","abstract":[{"lang":"eng","text":"This paper introduces an efficient modular solution kit for intralogistic drives, which reduces the total energy consumption of all drives in an automated warehouse by more than 15%. The reduction of energy consumption results from the interaction of optimized components (motors, control techniques and regeneration units), which are described in detail in this paper. Different motor concepts like the induction motor, the synchronous reluctance motor and the permanent magnet synchronous machine are compared according to the special requirements for intralogistics applications. Different control techniques are presented in order to achieve sensorless and efficient-optimal operation of these motors. The sensorless control technique uses signal injection to detect the rotor position sufficiently exact also in case of speed near standstill. Efficient-optimal operation is achieved by reducing the motor current with regard to the torque (MTPA-control). Furthermore this paper introduces a regeneration unit that can be connected between the DC link of frequency inverters and the mains to feed back regenerative energy. The regeneration unit consisting of a buck converter, a synchronous inverter and a line-filter can work in parallel to commonly used uncontrolled rectifiers. Its functioning is shown with the help of measurement results of a 1kW laboratory prototype. The last section shows a demonstrator in which a conventional conveyer system (with induction motor and braking resistor) is compared with an optimized one using the presented components. Power versus time measurements show specific energy savings resulting from the interaction of the optimized components."}],"main_file_link":[{"url":"https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=7695687"}],"year":2016,"author":[{"first_name":"Johann","full_name":"Austermann, Johann","last_name":"Austermann","id":"42114"},{"full_name":"Borcherding, Holger","last_name":"Borcherding","id":"1693","first_name":"Holger"},{"full_name":"Stichweh, H.","last_name":"Stichweh","first_name":"H."},{"first_name":"V.","full_name":"Grabs, V.","last_name":"Grabs"}],"conference":{"start_date":"2016-09-05","end_date":"2016-09-09","name":"18th European Conference on Power Electronics and Applications (EPE'16 ECCE Europe)","location":"Karlsruhe, Germany "},"department":[{"_id":"DEP6020"}]},{"status":"public","publisher":"IEEE","conference":{"end_date":"2016-09-09","start_date":"2016-09-05","name":"18th European Conference on Power Electronics and Applications (EPE'16 ECCE Europe)","location":"Karlsruhe, Germany "},"department":[{"_id":"DEP6020"}],"author":[{"last_name":"Jonsky","full_name":"Jonsky, T.","first_name":"T."},{"last_name":"Borcherding","id":"1693","full_name":"Borcherding, Holger","first_name":"Holger"},{"full_name":"Szymanski, P.","last_name":"Szymanski","first_name":"P."},{"last_name":"Wettlaufer","first_name":"P.","full_name":"Wettlaufer, P."},{"last_name":"Theßling","first_name":"M.","full_name":"Theßling, M."}],"main_file_link":[{"url":"https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=7695572"}],"year":2016,"abstract":[{"lang":"eng","text":"Three different control methods for a five-phase permanent magnet synchronous motor are presented and compared to each other. The control schemes include rotor-fixed approaches known as Field Orientated Control and stator-fix approaches like Direct Torque Control and Indirect Self Control. Simulations are carried out and are compared to measurement results."}],"citation":{"ama":"Jonsky T, Borcherding H, Szymanski P, Wettlaufer P, Theßling M. Comparison of control methods for H-bridge fed five-phase permanent magnet synchronous motors (peer reviewed!). In: 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe). IEEE; 2016. doi:10.1109/EPE.2016.7695572","ieee":"T. Jonsky, H. Borcherding, P. Szymanski, P. Wettlaufer, and M. Theßling, “Comparison of control methods for H-bridge fed five-phase permanent magnet synchronous motors (peer reviewed!),” in 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe), Karlsruhe, Germany , 2016.","din1505-2-1":"Jonsky, T. ; Borcherding, Holger ; Szymanski, P. ; Wettlaufer, P. ; Theßling, M.: Comparison of control methods for H-bridge fed five-phase permanent magnet synchronous motors (peer reviewed!). In: 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe) : IEEE, 2016","chicago-de":"Jonsky, T., Holger Borcherding, P. Szymanski, P. Wettlaufer und M. Theßling. 2016. Comparison of control methods for H-bridge fed five-phase permanent magnet synchronous motors (peer reviewed!). In: 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe). IEEE. doi:10.1109/EPE.2016.7695572, .","short":"T. Jonsky, H. Borcherding, P. Szymanski, P. Wettlaufer, M. Theßling, in: 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe), IEEE, 2016.","bjps":"Jonsky T et al. (2016) Comparison of Control Methods for H-Bridge Fed Five-Phase Permanent Magnet Synchronous Motors (Peer Reviewed!). 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe). IEEE.","havard":"T. Jonsky, H. Borcherding, P. Szymanski, P. Wettlaufer, M. Theßling, Comparison of control methods for H-bridge fed five-phase permanent magnet synchronous motors (peer reviewed!), in: 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe), IEEE, 2016.","mla":"Jonsky, T., et al. “Comparison of Control Methods for H-Bridge Fed Five-Phase Permanent Magnet Synchronous Motors (Peer Reviewed!).” 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe), IEEE, 2016, doi:10.1109/EPE.2016.7695572.","ufg":"Jonsky, T. et. al. (2016): Comparison of control methods for H-bridge fed five-phase permanent magnet synchronous motors (peer reviewed!), in: 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe).","van":"Jonsky T, Borcherding H, Szymanski P, Wettlaufer P, Theßling M. Comparison of control methods for H-bridge fed five-phase permanent magnet synchronous motors (peer reviewed!). In: 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe). IEEE; 2016.","chicago":"Jonsky, T., Holger Borcherding, P. Szymanski, P. Wettlaufer, and M. Theßling. “Comparison of Control Methods for H-Bridge Fed Five-Phase Permanent Magnet Synchronous Motors (Peer Reviewed!).” In 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe). IEEE, 2016. https://doi.org/10.1109/EPE.2016.7695572.","apa":"Jonsky, T., Borcherding, H., Szymanski, P., Wettlaufer, P., & Theßling, M. (2016). Comparison of control methods for H-bridge fed five-phase permanent magnet synchronous motors (peer reviewed!). In 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe). Karlsruhe, Germany : IEEE. https://doi.org/10.1109/EPE.2016.7695572"},"title":"Comparison of control methods for H-bridge fed five-phase permanent magnet synchronous motors (peer reviewed!)","language":[{"iso":"eng"}],"doi":"10.1109/EPE.2016.7695572","_id":"4293","date_updated":"2023-03-15T13:49:51Z","user_id":"74004","type":"conference","date_created":"2020-12-14T13:55:20Z","publication":"2016 18th European Conference on Power Electronics and Applications (EPE'16 ECCE Europe)"},{"_id":"4298","doi":"10.1007/978-3-319-50478-0_18","place":"Cham, CH","intvolume":" 9605","user_id":"15514","type":"book_chapter","publisher":"Springer","abstract":[{"text":"In this paper, we present the current state-of-the-art of decision making (DM) and machine learning (ML) and bridge the two research domains to create an integrated approach of complex problem solving based on human and computational agents. We present a novel classification of ML, emphasizing the human-in-the-loop in interactive ML (iML) and more specific on collaborative interactive ML (ciML), which we understand as a deep integrated version of iML, where humans and algorithms work hand in hand to solve complex problems. Both humans and computers have specific strengths and weaknesses and integrating humans into machine learning processes might be a very efficient way for tackling problems. This approach bears immense research potential for various domains, e.g., in health informatics or in industrial applications. We outline open questions and name future challenges that have to be addressed by the research community to enable the use of collaborative interactive machine learning for problem solving in a large scale.","lang":"eng"}],"department":[{"_id":"DEP5023"}],"publication_status":"published","series_title":"Lecture Notes in Computer Science / Lecture Notes in Artificial Intelligence ","keyword":["Decision making","Reasoning","Interactive machine learning","Collaborative interactive machine learning"],"language":[{"iso":"eng"}],"editor":[{"full_name":"Holzinger, Andreas","last_name":"Holzinger","first_name":"Andreas"}],"date_updated":"2023-03-15T13:49:51Z","publication":"Machine Learning for Health Informatics : State-of-the-Art and Future Challenges ","publication_identifier":{"eisbn":["978-3-319-50478-0 "],"isbn":["978-3-319-50477-3 "]},"date_created":"2020-12-22T14:11:00Z","status":"public","page":"357-376","author":[{"first_name":"Sebastian","last_name":"Robert","full_name":"Robert, Sebastian"},{"last_name":"Büttner","first_name":"Sebastian","id":"61868","full_name":"Büttner, Sebastian"},{"first_name":"Carsten","id":"61525","full_name":"Röcker, Carsten","last_name":"Röcker"},{"last_name":"Holzinger","first_name":"Andreas","full_name":"Holzinger, Andreas"}],"year":2016,"volume":9605,"citation":{"short":"S. Robert, S. Büttner, C. Röcker, A. Holzinger, in: A. Holzinger (Ed.), Machine Learning for Health Informatics : State-of-the-Art and Future Challenges , Springer, Cham, CH, 2016, pp. 357–376.","chicago-de":"Robert, Sebastian, Sebastian Büttner, Carsten Röcker und Andreas Holzinger. 2016. Reasoning Under Uncertainty: Towards Collaborative Interactive Machine Learning. In: Machine Learning for Health Informatics : State-of-the-Art and Future Challenges , hg. von Andreas Holzinger, 9605:357–376. Lecture Notes in Computer Science / Lecture Notes in Artificial Intelligence . Cham, CH: Springer. doi:10.1007/978-3-319-50478-0_18, .","din1505-2-1":"Robert, Sebastian ; Büttner, Sebastian ; Röcker, Carsten ; Holzinger, Andreas: Reasoning Under Uncertainty: Towards Collaborative Interactive Machine Learning. In: Holzinger, A. (Hrsg.): Machine Learning for Health Informatics : State-of-the-Art and Future Challenges , Lecture Notes in Computer Science / Lecture Notes in Artificial Intelligence . Bd. 9605. Cham, CH : Springer, 2016, S. 357–376","van":"Robert S, Büttner S, Röcker C, Holzinger A. Reasoning Under Uncertainty: Towards Collaborative Interactive Machine Learning. In: Holzinger A, editor. Machine Learning for Health Informatics : State-of-the-Art and Future Challenges . Cham, CH: Springer; 2016. p. 357–76. (Lecture Notes in Computer Science / Lecture Notes in Artificial Intelligence ; vol. 9605).","bjps":"Robert S et al. (2016) Reasoning Under Uncertainty: Towards Collaborative Interactive Machine Learning. In Holzinger A (ed.), Machine Learning for Health Informatics : State-of-the-Art and Future Challenges , vol. 9605. Cham, CH: Springer, pp. 357–376.","mla":"Robert, Sebastian, et al. “Reasoning Under Uncertainty: Towards Collaborative Interactive Machine Learning.” Machine Learning for Health Informatics : State-of-the-Art and Future Challenges , edited by Andreas Holzinger, vol. 9605, Springer, 2016, pp. 357–76, doi:10.1007/978-3-319-50478-0_18.","havard":"S. Robert, S. Büttner, C. Röcker, A. Holzinger, Reasoning Under Uncertainty: Towards Collaborative Interactive Machine Learning, in: A. Holzinger (Ed.), Machine Learning for Health Informatics : State-of-the-Art and Future Challenges , Springer, Cham, CH, 2016: pp. 357–376.","ufg":"Robert, Sebastian et. al. (2016): Reasoning Under Uncertainty: Towards Collaborative Interactive Machine Learning, in: Andreas Holzinger (Hg.): Machine Learning for Health Informatics : State-of-the-Art and Future Challenges (=Lecture Notes in Computer Science / Lecture Notes in Artificial Intelligence 9605), Cham, CH, S. 357–376.","apa":"Robert, S., Büttner, S., Röcker, C., & Holzinger, A. (2016). Reasoning Under Uncertainty: Towards Collaborative Interactive Machine Learning. In A. Holzinger (Ed.), Machine Learning for Health Informatics : State-of-the-Art and Future Challenges (Vol. 9605, pp. 357–376). Cham, CH: Springer. https://doi.org/10.1007/978-3-319-50478-0_18","chicago":"Robert, Sebastian, Sebastian Büttner, Carsten Röcker, and Andreas Holzinger. “Reasoning Under Uncertainty: Towards Collaborative Interactive Machine Learning.” In Machine Learning for Health Informatics : State-of-the-Art and Future Challenges , edited by Andreas Holzinger, 9605:357–76. Lecture Notes in Computer Science / Lecture Notes in Artificial Intelligence . Cham, CH: Springer, 2016. https://doi.org/10.1007/978-3-319-50478-0_18.","ama":"Robert S, Büttner S, Röcker C, Holzinger A. Reasoning Under Uncertainty: Towards Collaborative Interactive Machine Learning. In: Holzinger A, ed. Machine Learning for Health Informatics : State-of-the-Art and Future Challenges . Vol 9605. Lecture Notes in Computer Science / Lecture Notes in Artificial Intelligence . Cham, CH: Springer; 2016:357-376. doi:10.1007/978-3-319-50478-0_18","ieee":"S. Robert, S. Büttner, C. Röcker, and A. Holzinger, “Reasoning Under Uncertainty: Towards Collaborative Interactive Machine Learning,” in Machine Learning for Health Informatics : State-of-the-Art and Future Challenges , vol. 9605, A. Holzinger, Ed. Cham, CH: Springer, 2016, pp. 357–376."},"title":"Reasoning Under Uncertainty: Towards Collaborative Interactive Machine Learning"},{"related_material":{"link":[{"url":"https://www.th-owl.de/init/uploads/tx_initdb/HCII40_2016_paper_3__7___002_.pdf","relation":"original"}]},"date_updated":"2023-03-15T13:49:51Z","corporate_editor":["Fraunhofer IGD "],"date_created":"2020-12-22T14:11:02Z","publication":"Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 ","language":[{"iso":"eng"}],"keyword":["Industry 4.0","Assistive Systems","Small and Medium-Sized Enterprises","SME","Human-Centered Design","Human-Computer Interaction for Industry"],"oa":"1","citation":{"ama":"Mucha H, Büttner S, Röcker C. Application Areas for Human-Centered Assistive Systems. In: Fraunhofer IGD , ed. Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 . Graz, Österreich: TU; 2016.","ieee":"H. Mucha, S. Büttner, and C. Röcker, “Application Areas for Human-Centered Assistive Systems,” in Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 , Graz, Austria, 2016.","short":"H. Mucha, S. Büttner, C. Röcker, in: Fraunhofer IGD (Ed.), Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 , TU, Graz, Österreich, 2016.","din1505-2-1":"Mucha, Henrik ; Büttner, Sebastian ; Röcker, Carsten: Application Areas for Human-Centered Assistive Systems. In: Fraunhofer IGD (Hrsg.): Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 . Graz, Österreich : TU, 2016","chicago-de":"Mucha, Henrik, Sebastian Büttner und Carsten Röcker. 2016. Application Areas for Human-Centered Assistive Systems. In: Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 , hg. von Fraunhofer IGD . Graz, Österreich: TU.","van":"Mucha H, Büttner S, Röcker C. Application Areas for Human-Centered Assistive Systems. In: Fraunhofer IGD , editor. Human-Computer Interaction – Perspectives on Industry 40 Workshop at i-KNOW 2016 . Graz, Österreich: TU; 2016.","ufg":"Mucha, Henrik et. al. (2016): Application Areas for Human-Centered Assistive Systems, in: Fraunhofer IGD (Hg.): Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 , Graz, Österreich.","mla":"Mucha, Henrik, et al. “Application Areas for Human-Centered Assistive Systems.” Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 , edited by Fraunhofer IGD , TU, 2016.","havard":"H. Mucha, S. Büttner, C. Röcker, Application Areas for Human-Centered Assistive Systems, in: Fraunhofer IGD (Ed.), Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 , TU, Graz, Österreich, 2016.","bjps":"Mucha H, Büttner S and Röcker C (2016) Application Areas for Human-Centered Assistive Systems. In Fraunhofer IGD (ed.), Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 . Graz, Österreich: TU.","apa":"Mucha, H., Büttner, S., & Röcker, C. (2016). Application Areas for Human-Centered Assistive Systems. In Fraunhofer IGD (Ed.), Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 . Graz, Österreich: TU.","chicago":"Mucha, Henrik, Sebastian Büttner, and Carsten Röcker. “Application Areas for Human-Centered Assistive Systems.” In Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 , edited by Fraunhofer IGD . Graz, Österreich: TU, 2016."},"title":"Application Areas for Human-Centered Assistive Systems","status":"public","author":[{"first_name":"Henrik","last_name":"Mucha","full_name":"Mucha, Henrik","id":"64896"},{"last_name":"Büttner","first_name":"Sebastian","id":"61868","full_name":"Büttner, Sebastian"},{"full_name":"Röcker, Carsten","last_name":"Röcker","id":"61525","first_name":"Carsten"}],"main_file_link":[{"open_access":"1"}],"year":2016,"user_id":"15514","type":"conference","place":"Graz, Österreich","_id":"4299","publication_status":"published","publisher":"TU","department":[{"_id":"DEP5023"}],"conference":{"end_date":"2016-10-19","start_date":"201610-18","name":"Human-Computer Interaction – Perspectives on Industry 4.0. Workshop","location":"Graz, Austria"},"abstract":[{"text":"With the advances of technology, intelligent assistive systems that adapt to individual humans will become feasible. However, application areas of such systems are rarely discussed within the Industry 4.0 community. Most assistive systems that have been presented have been developed for specific task, such as assembly support or warehouse picking, but there might be a huge uncovered design space to be explored. With this work, we want to step back from existing systems and analyze the design opportunities of assistive systems especially for small and medium-size enterprises (SME). To achieve this goal we conducted a study in four SME, consisting of observations and interviews. Here we present our findings about the potential future application areas of human-centered assistive systems.","lang":"eng"}]},{"title":"Applying Human-Centered Design Methods in Industry – a Field Report","citation":{"short":"S. Büttner, C. Röcker, in: Fraunhofer IGD (Ed.), Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016, TU, Graz, Österreich, 2016.","din1505-2-1":"Büttner, Sebastian ; Röcker, Carsten: Applying Human-Centered Design Methods in Industry – a Field Report. In: Fraunhofer IGD (Hrsg.): Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016. Graz, Österreich : TU, 2016","chicago-de":"Büttner, Sebastian und Carsten Röcker. 2016. Applying Human-Centered Design Methods in Industry – a Field Report. In: Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016, hg. von Fraunhofer IGD . Graz, Österreich: TU.","van":"Büttner S, Röcker C. Applying Human-Centered Design Methods in Industry – a Field Report. In: Fraunhofer IGD , editor. Human-Computer Interaction – Perspectives on Industry 40 Workshop at i-KNOW 2016. Graz, Österreich: TU; 2016.","ufg":"Büttner, Sebastian/Röcker, Carsten (2016): Applying Human-Centered Design Methods in Industry – a Field Report, in: Fraunhofer IGD (Hg.): Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016, Graz, Österreich.","havard":"S. Büttner, C. Röcker, Applying Human-Centered Design Methods in Industry – a Field Report, in: Fraunhofer IGD (Ed.), Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016, TU, Graz, Österreich, 2016.","bjps":"Büttner S and Röcker C (2016) Applying Human-Centered Design Methods in Industry – a Field Report. In Fraunhofer IGD (ed.), Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016. Graz, Österreich: TU.","mla":"Büttner, Sebastian, and Carsten Röcker. “Applying Human-Centered Design Methods in Industry – a Field Report.” Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016, edited by Fraunhofer IGD , TU, 2016.","apa":"Büttner, S., & Röcker, C. (2016). Applying Human-Centered Design Methods in Industry – a Field Report. In Fraunhofer IGD (Ed.), Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016. Graz, Österreich: TU.","chicago":"Büttner, Sebastian, and Carsten Röcker. “Applying Human-Centered Design Methods in Industry – a Field Report.” In Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016, edited by Fraunhofer IGD . Graz, Österreich: TU, 2016.","ama":"Büttner S, Röcker C. Applying Human-Centered Design Methods in Industry – a Field Report. In: Fraunhofer IGD , ed. Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016. Graz, Österreich: TU; 2016.","ieee":"S. Büttner and C. Röcker, “Applying Human-Centered Design Methods in Industry – a Field Report,” in Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016, Graz, Austria, 2016."},"main_file_link":[{"open_access":"1"}],"author":[{"last_name":"Büttner","id":"61868","full_name":"Büttner, Sebastian","first_name":"Sebastian"},{"first_name":"Carsten","last_name":"Röcker","full_name":"Röcker, Carsten","id":"61525"}],"year":2016,"status":"public","publication":"Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016","date_created":"2020-12-22T14:11:03Z","related_material":{"link":[{"relation":"original","url":"https://www.th-owl.de/init/uploads/tx_initdb/HCII40_2016_paper_3__7___002_.pdf"}]},"date_updated":"2023-03-15T13:49:51Z","corporate_editor":["Fraunhofer IGD "],"oa":"1","keyword":["Design Methods","Human-Centered Design","Industrial Human-Computer Interaction","Industry 4.0"],"language":[{"iso":"eng"}],"publication_status":"published","conference":{"name":"Human-Computer Interaction – Perspectives on Industry 4.0. Workshop","location":"Graz, Austria","end_date":"2016-10-19","start_date":"201610-18"},"department":[{"_id":"DEP5023"}],"abstract":[{"text":"Human-centered design methods are nowadays widely used in the design of consumer products. These methods aim at designing products with a high usability and a positive user experience (UX). However, in the domain of the design of industrial machines, design is often driven by functional requirements mostly neglecting the usability and user experience of products. Together with a medium-sized manufacturer of industrial laundry machines we applied the human-centered design process in an industrial context. In this field report, we describe the human-centered design methods applied in the project, the adaptations we had to make in the process and the challenges and opportunities for applying human-centered design in an industrial environment in general. ","lang":"eng"}],"publisher":"TU","type":"conference","user_id":"15514","place":"Graz, Österreich","_id":"4300"},{"volume":9740,"citation":{"chicago-de":"Sand, Oliver, Sebastian Büttner, Volker Paelke und Carsten Röcker. 2016. smARt.Assembly: Projection-Based Augmented Reality for Supporting Assembly Workers. In: 18th International Conference on Human-Computer Interaction (HCII ’16), hg. von Stefanie Lackey und Randall Shumaker, 9740:643–652. Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI. Cham: Springer. doi:10.1007/978-3-319-39907-2_61, .","din1505-2-1":"Sand, Oliver ; Büttner, Sebastian ; Paelke, Volker ; Röcker, Carsten: smARt.Assembly: Projection-Based Augmented Reality for Supporting Assembly Workers. In: Lackey, S. ; Shumaker, R. (Hrsg.): 18th International Conference on Human-Computer Interaction (HCII ’16), Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI. Bd. 9740. Cham : Springer, 2016, S. 643–652","short":"O. Sand, S. Büttner, V. Paelke, C. Röcker, in: S. Lackey, R. Shumaker (Eds.), 18th International Conference on Human-Computer Interaction (HCII ’16), Springer, Cham, 2016, pp. 643–652.","chicago":"Sand, Oliver, Sebastian Büttner, Volker Paelke, and Carsten Röcker. “SmARt.Assembly: Projection-Based Augmented Reality for Supporting Assembly Workers.” In 18th International Conference on Human-Computer Interaction (HCII ’16), edited by Stefanie Lackey and Randall Shumaker, 9740:643–52. Lecture Notes in Computer Science / Information Systems and Applications, Incl. Internet/Web, and HCI. Cham: Springer, 2016. https://doi.org/10.1007/978-3-319-39907-2_61.","ieee":"O. Sand, S. Büttner, V. Paelke, and C. Röcker, “smARt.Assembly: Projection-Based Augmented Reality for Supporting Assembly Workers,” in 18th International Conference on Human-Computer Interaction (HCII ’16), vol. 9740, S. Lackey and R. Shumaker, Eds. Cham: Springer, 2016, pp. 643–652. doi: 10.1007/978-3-319-39907-2_61.","apa":"Sand, O., Büttner, S., Paelke, V., & Röcker, C. (2016). smARt.Assembly: Projection-Based Augmented Reality for Supporting Assembly Workers. In S. Lackey & R. Shumaker (Eds.), 18th International Conference on Human-Computer Interaction (HCII ’16) (Vol. 9740, pp. 643–652). Springer. https://doi.org/10.1007/978-3-319-39907-2_61","havard":"O. Sand, S. Büttner, V. Paelke, C. Röcker, smARt.Assembly: Projection-Based Augmented Reality for Supporting Assembly Workers, in: S. Lackey, R. Shumaker (Eds.), 18th International Conference on Human-Computer Interaction (HCII ’16), Springer, Cham, 2016: pp. 643–652.","bjps":"Sand O et al. (2016) SmARt.Assembly: Projection-Based Augmented Reality for Supporting Assembly Workers. In Lackey S and Shumaker R (eds), 18th International Conference on Human-Computer Interaction (HCII ’16), vol. 9740. Cham: Springer, pp. 643–652.","mla":"Sand, Oliver, et al. “SmARt.Assembly: Projection-Based Augmented Reality for Supporting Assembly Workers.” 18th International Conference on Human-Computer Interaction (HCII ’16), edited by Stefanie Lackey and Randall Shumaker, vol. 9740, Springer, 2016, pp. 643–52, https://doi.org/10.1007/978-3-319-39907-2_61.","ufg":"Sand, Oliver u. a.: smARt.Assembly: Projection-Based Augmented Reality for Supporting Assembly Workers, in: Lackey, Stefanie/Shumaker, Randall (Hgg.): 18th International Conference on Human-Computer Interaction (HCII ’16), Bd. 9740, Cham 2016 (Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI), S. 643–652.","ama":"Sand O, Büttner S, Paelke V, Röcker C. smARt.Assembly: Projection-Based Augmented Reality for Supporting Assembly Workers. In: Lackey S, Shumaker R, eds. 18th International Conference on Human-Computer Interaction (HCII ’16). Vol 9740. Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI. Springer; 2016:643-652. doi:10.1007/978-3-319-39907-2_61","van":"Sand O, Büttner S, Paelke V, Röcker C. smARt.Assembly: Projection-Based Augmented Reality for Supporting Assembly Workers. In: Lackey S, Shumaker R, editors. 18th International Conference on Human-Computer Interaction (HCII ’16). Cham: Springer; 2016. p. 643–52. (Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI; vol. 9740)."},"title":"smARt.Assembly: Projection-Based Augmented Reality for Supporting Assembly Workers","page":"643-652","status":"public","year":"2016","author":[{"full_name":"Sand, Oliver","last_name":"Sand","first_name":"Oliver"},{"full_name":"Büttner, Sebastian","first_name":"Sebastian","last_name":"Büttner","id":"61868"},{"last_name":"Paelke","first_name":"Volker","full_name":"Paelke, Volker"},{"id":"61525","first_name":"Carsten","full_name":"Röcker, Carsten","last_name":"Röcker"}],"editor":[{"first_name":"Stefanie","last_name":"Lackey","full_name":"Lackey, Stefanie"},{"full_name":"Shumaker, Randall","first_name":"Randall","last_name":"Shumaker"}],"date_updated":"2025-04-11T09:06:01Z","date_created":"2020-12-22T14:11:06Z","publication":"18th International Conference on Human-Computer Interaction (HCII '16)","publication_identifier":{"isbn":["978-3-319-39906-5"],"unknown":["978-3-319-39907-2"]},"language":[{"iso":"eng"}],"keyword":["Augmented reality","Projection","Assembly work","Manual assembly"],"publication_status":"published","series_title":"Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI","publisher":"Springer","abstract":[{"lang":"eng","text":"In this paper we present smARt.assembly – a projection-based augmented reality (AR) assembly assistance system for industrial applications. Our system projects digital guidance information in terms of picking information and assembly data into the physical workspace of a user. By using projections, we eliminate the use of smart glasses that have drawbacks such as a limited field of view or low wearing comfort. With smARt.assembly, users are able to assemble products without previous knowledge and without any other assistance."}],"department":[{"_id":"DEP5023"}],"conference":{"location":"Toronto, Canada","name":"8th International Conference, VAMR 2016, Held as Part of HCI International 2016, ","start_date":"2016-07-17","end_date":"2016-07-22"},"intvolume":" 9740","user_id":"83781","type":"book_chapter","doi":"10.1007/978-3-319-39907-2_61","_id":"4302","place":"Cham"},{"author":[{"last_name":"Büttner","first_name":"Sebastian","id":"61868","full_name":"Büttner, Sebastian"},{"first_name":"Markus","last_name":"Funk","full_name":"Funk, Markus"},{"full_name":"Sand, Oliver","last_name":"Sand","first_name":"Oliver"},{"full_name":"Röcker, Carsten","first_name":"Carsten","last_name":"Röcker","id":"61525"}],"year":2016,"main_file_link":[{"open_access":"1"}],"page":"1-8","status":"public","title":"Using Head-Mounted Displays and In-Situ Projection for Assistive Systems : A Comparison","citation":{"ama":"Büttner S, Funk M, Sand O, Röcker C. Using Head-Mounted Displays and In-Situ Projection for Assistive Systems : A Comparison. In: 9th ACM International Conference on PErvasive Technologies Related to Assistive Environments (PETRA ’16) . Korfu, Griechenland: ACM; 2016:1-8. doi:10.1145/2910674.2910679","ieee":"S. Büttner, M. Funk, O. Sand, and C. Röcker, “Using Head-Mounted Displays and In-Situ Projection for Assistive Systems : A Comparison,” in 9th ACM International Conference on PErvasive Technologies Related to Assistive Environments (PETRA ’16) , Corfu; Greece , 2016, pp. 1–8.","van":"Büttner S, Funk M, Sand O, Röcker C. Using Head-Mounted Displays and In-Situ Projection for Assistive Systems : A Comparison. In: 9th ACM International Conference on PErvasive Technologies Related to Assistive Environments (PETRA ’16) . Korfu, Griechenland: ACM; 2016. p. 1–8.","bjps":"Büttner S et al. (2016) Using Head-Mounted Displays and In-Situ Projection for Assistive Systems : A Comparison. 9th ACM International Conference on PErvasive Technologies Related to Assistive Environments (PETRA ’16) . Korfu, Griechenland: ACM, pp. 1–8.","havard":"S. Büttner, M. Funk, O. Sand, C. Röcker, Using Head-Mounted Displays and In-Situ Projection for Assistive Systems : A Comparison, in: 9th ACM International Conference on PErvasive Technologies Related to Assistive Environments (PETRA ’16) , ACM, Korfu, Griechenland, 2016: pp. 1–8.","mla":"Büttner, Sebastian, et al. “Using Head-Mounted Displays and In-Situ Projection for Assistive Systems : A Comparison.” 9th ACM International Conference on PErvasive Technologies Related to Assistive Environments (PETRA ’16) , ACM, 2016, pp. 1–8, doi:10.1145/2910674.2910679.","ufg":"Büttner, Sebastian et. al. (2016): Using Head-Mounted Displays and In-Situ Projection for Assistive Systems : A Comparison, in: 9th ACM International Conference on PErvasive Technologies Related to Assistive Environments (PETRA ’16) , Korfu, Griechenland, S. 1–8.","apa":"Büttner, S., Funk, M., Sand, O., & Röcker, C. (2016). Using Head-Mounted Displays and In-Situ Projection for Assistive Systems : A Comparison. In 9th ACM International Conference on PErvasive Technologies Related to Assistive Environments (PETRA ’16) (pp. 1–8). Korfu, Griechenland: ACM. https://doi.org/10.1145/2910674.2910679","chicago":"Büttner, Sebastian, Markus Funk, Oliver Sand, and Carsten Röcker. “Using Head-Mounted Displays and In-Situ Projection for Assistive Systems : A Comparison.” In 9th ACM International Conference on PErvasive Technologies Related to Assistive Environments (PETRA ’16) , 1–8. Korfu, Griechenland: ACM, 2016. https://doi.org/10.1145/2910674.2910679.","short":"S. Büttner, M. Funk, O. Sand, C. Röcker, in: 9th ACM International Conference on PErvasive Technologies Related to Assistive Environments (PETRA ’16) , ACM, Korfu, Griechenland, 2016, pp. 1–8.","chicago-de":"Büttner, Sebastian, Markus Funk, Oliver Sand und Carsten Röcker. 2016. Using Head-Mounted Displays and In-Situ Projection for Assistive Systems : A Comparison. In: 9th ACM International Conference on PErvasive Technologies Related to Assistive Environments (PETRA ’16) , 1–8. Korfu, Griechenland: ACM. doi:10.1145/2910674.2910679, .","din1505-2-1":"Büttner, Sebastian ; Funk, Markus ; Sand, Oliver ; Röcker, Carsten: Using Head-Mounted Displays and In-Situ Projection for Assistive Systems : A Comparison. In: 9th ACM International Conference on PErvasive Technologies Related to Assistive Environments (PETRA ’16) . Korfu, Griechenland : ACM, 2016, S. 1–8"},"oa":"1","language":[{"iso":"eng"}],"keyword":["Spatial Augmented Reality","Industrial Augmented Reality","Projection-based Augmented Reality","Head-Mounted Display","Manufacturing","Assistive System"],"date_created":"2020-12-22T14:11:07Z","publication":"9th ACM International Conference on PErvasive Technologies Related to Assistive Environments (PETRA '16) ","publication_identifier":{"isbn":["978-1-4503-4337-4"]},"date_updated":"2023-03-15T13:49:51Z","abstract":[{"text":"The increasing demand to customize products affects production workers in many industries, as assembly tasks become more complex due to higher product variety. Assistive systems providing instructions at the workplace have been proposed to overcome increasing cognitive demand during assembly tasks. Commercially available assistive systems provide spatially registered instructions, either by using in-situ projections or head-mounted displays (HMDs). As there is little empirical knowledge about the individual advantages and disadvantages of both approaches, we are interested in comparing both types of systems. Through a user study at a manual assembly workplace, we compare both approaches to a paper baseline. Our results reveal that both in-situ instructions and paper instructions lead to significantly faster task completion times and significantly fewer errors than HMDs. Using additional questionnaires and interviews, we are able to identify the shortcomings of HMD-based instructions and discuss the possibilities of using flexible in-situ instructions for worker assistance.","lang":"eng"}],"department":[{"_id":"DEP5023"}],"conference":{"name":"PETRA '16: Proceedings of the 9th ACM International Conference on PErvasive Technologies Related to Assistive Environments","location":"Corfu; Greece ","end_date":"2016-07-01","start_date":"2016-06-29"},"publisher":"ACM","publication_status":"published","doi":"10.1145/2910674.2910679","_id":"4303","place":"Korfu, Griechenland","type":"conference","user_id":"15514"},{"status":"public","page":"169-1970","author":[{"first_name":"Manuel","full_name":"Behlen, Manuel","last_name":"Behlen"},{"last_name":"Büttner","full_name":"Büttner, Sebastian","id":"61868","first_name":"Sebastian"},{"last_name":"Schmidt","first_name":"Sebastian","full_name":"Schmidt, Sebastian"},{"full_name":"Pyritz, Sarah","first_name":"Sarah","last_name":"Pyritz"},{"last_name":"Röcker","first_name":"Carsten","id":"61525","full_name":"Röcker, Carsten"}],"year":2016,"volume":2284,"citation":{"din1505-2-1":"Behlen, Manuel ; Büttner, Sebastian ; Schmidt, Sebastian ; Pyritz, Sarah ; Röcker, Carsten: Multitouch im industriellen Umfeld: Evaluierung bestehender Systeme, identifizierte Anwendungsszenarien und Handlungsempfehlungen für zukünftige Systeme. In: VDI VDE, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (Hrsg.): Automation 2016 : secure & reliable in the digital world : 17. Branchentreff der Mess- und Automatisierungstechnik : Kongresshaus Baden-Baden, 07. und 08. Juni 2016 , Verein Deutscher Ingenieure: VDI-Berichte . Bd. 2284. Düsseldorf : VDI, 2016, S. 169–1970","chicago-de":"Behlen, Manuel, Sebastian Büttner, Sebastian Schmidt, Sarah Pyritz und Carsten Röcker. 2016. Multitouch im industriellen Umfeld: Evaluierung bestehender Systeme, identifizierte Anwendungsszenarien und Handlungsempfehlungen für zukünftige Systeme. In: Automation 2016 : secure & reliable in the digital world : 17. Branchentreff der Mess- und Automatisierungstechnik : Kongresshaus Baden-Baden, 07. und 08. Juni 2016 , hg. von VDI VDE, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik , 2284:169–1970. Verein Deutscher Ingenieure: VDI-Berichte . Düsseldorf : VDI.","short":"M. Behlen, S. Büttner, S. Schmidt, S. Pyritz, C. Röcker, in: VDI VDE, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (Ed.), Automation 2016 : secure & reliable in the digital world : 17. Branchentreff der Mess- und Automatisierungstechnik : Kongresshaus Baden-Baden, 07. und 08. Juni 2016 , VDI, Düsseldorf , 2016, pp. 169–1970.","chicago":"Behlen, Manuel, Sebastian Büttner, Sebastian Schmidt, Sarah Pyritz, and Carsten Röcker. “Multitouch im industriellen Umfeld: Evaluierung bestehender Systeme, identifizierte Anwendungsszenarien und Handlungsempfehlungen für zukünftige Systeme.” In Automation 2016 : secure & reliable in the digital world : 17. Branchentreff der Mess- und Automatisierungstechnik : Kongresshaus Baden-Baden, 07. und 08. Juni 2016 , edited by VDI VDE, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik , 2284:169–1970. Verein Deutscher Ingenieure: VDI-Berichte . Düsseldorf : VDI, 2016.","apa":"Behlen, M., Büttner, S., Schmidt, S., Pyritz, S., & Röcker, C. (2016). Multitouch im industriellen Umfeld: Evaluierung bestehender Systeme, identifizierte Anwendungsszenarien und Handlungsempfehlungen für zukünftige Systeme. In VDI VDE, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (Ed.), Automation 2016 : secure & reliable in the digital world : 17. Branchentreff der Mess- und Automatisierungstechnik : Kongresshaus Baden-Baden, 07. und 08. Juni 2016 (Vol. 2284, pp. 169–1970). Düsseldorf : VDI.","bjps":"Behlen M et al. (2016) Multitouch im industriellen Umfeld: Evaluierung bestehender Systeme, identifizierte Anwendungsszenarien und Handlungsempfehlungen für zukünftige Systeme. In VDI VDE, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (ed.), Automation 2016 : secure & reliable in the digital world : 17. Branchentreff der Mess- und Automatisierungstechnik : Kongresshaus Baden-Baden, 07. und 08. Juni 2016 , vol. 2284. Düsseldorf : VDI, pp. 169–1970.","mla":"Behlen, Manuel, et al. “Multitouch im industriellen Umfeld: Evaluierung bestehender Systeme, identifizierte Anwendungsszenarien und Handlungsempfehlungen für zukünftige Systeme.” Automation 2016 : secure & reliable in the digital world : 17. Branchentreff der Mess- und Automatisierungstechnik : Kongresshaus Baden-Baden, 07. und 08. Juni 2016 , edited by VDI VDE, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik , vol. 2284, VDI, 2016, pp. 169–1970.","havard":"M. Behlen, S. Büttner, S. Schmidt, S. Pyritz, C. Röcker, Multitouch im industriellen Umfeld: Evaluierung bestehender Systeme, identifizierte Anwendungsszenarien und Handlungsempfehlungen für zukünftige Systeme, in: VDI VDE, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (Ed.), Automation 2016 : secure & reliable in the digital world : 17. Branchentreff der Mess- und Automatisierungstechnik : Kongresshaus Baden-Baden, 07. und 08. Juni 2016 , VDI, Düsseldorf , 2016: pp. 169–1970.","ufg":"Behlen, Manuel et. al. (2016): Multitouch im industriellen Umfeld: Evaluierung bestehender Systeme, identifizierte Anwendungsszenarien und Handlungsempfehlungen für zukünftige Systeme, in: VDI VDE, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (Hg.): Automation 2016 : secure & reliable in the digital world : 17. Branchentreff der Mess- und Automatisierungstechnik : Kongresshaus Baden-Baden, 07. und 08. Juni 2016 (=Verein Deutscher Ingenieure: VDI-Berichte 2284), Düsseldorf , S. 169–1970.","van":"Behlen M, Büttner S, Schmidt S, Pyritz S, Röcker C. Multitouch im industriellen Umfeld: Evaluierung bestehender Systeme, identifizierte Anwendungsszenarien und Handlungsempfehlungen für zukünftige Systeme. In: VDI VDE, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik , editor. Automation 2016 : secure & reliable in the digital world : 17 Branchentreff der Mess- und Automatisierungstechnik : Kongresshaus Baden-Baden, 07 und 08 Juni 2016 . Düsseldorf : VDI; 2016. p. 169–1970. (Verein Deutscher Ingenieure: VDI-Berichte ; vol. 2284).","ieee":"M. Behlen, S. Büttner, S. Schmidt, S. Pyritz, and C. Röcker, “Multitouch im industriellen Umfeld: Evaluierung bestehender Systeme, identifizierte Anwendungsszenarien und Handlungsempfehlungen für zukünftige Systeme,” in Automation 2016 : secure & reliable in the digital world : 17. Branchentreff der Mess- und Automatisierungstechnik : Kongresshaus Baden-Baden, 07. und 08. Juni 2016 , Baden-Baden, 2016, vol. 2284, pp. 169–1970.","ama":"Behlen M, Büttner S, Schmidt S, Pyritz S, Röcker C. Multitouch im industriellen Umfeld: Evaluierung bestehender Systeme, identifizierte Anwendungsszenarien und Handlungsempfehlungen für zukünftige Systeme. In: VDI VDE, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik , ed. Automation 2016 : secure & reliable in the digital world : 17. Branchentreff der Mess- und Automatisierungstechnik : Kongresshaus Baden-Baden, 07. und 08. Juni 2016 . Vol 2284. Verein Deutscher Ingenieure: VDI-Berichte . Düsseldorf : VDI; 2016:169-1970."},"title":"Multitouch im industriellen Umfeld: Evaluierung bestehender Systeme, identifizierte Anwendungsszenarien und Handlungsempfehlungen für zukünftige Systeme","language":[{"iso":"ger"}],"corporate_editor":["VDI VDE, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik "],"date_updated":"2023-03-15T13:49:51Z","publication":"Automation 2016 : secure & reliable in the digital world : 17. Branchentreff der Mess- und Automatisierungstechnik : Kongresshaus Baden-Baden, 07. und 08. Juni 2016 ","publication_identifier":{"isbn":["978-3-18-092284-3"]},"date_created":"2020-12-22T14:11:09Z","publisher":"VDI","department":[{"_id":"DEP5023"}],"conference":{"location":"Baden-Baden","name":"Automation 2016","start_date":"2016-06-07","end_date":"2016-06-08"},"publication_status":"published","series_title":"Verein Deutscher Ingenieure: VDI-Berichte ","_id":"4304","place":"Düsseldorf ","intvolume":" 2284","user_id":"15514","type":"conference"},{"publisher":"Hochschule Ostwestfalen-Lippe","page":"1 - 9","status":"public","issue":"5","conference":{"location":"Lemgo","name":"5. Jahreskolloquium Bildverarbeitung in der Automation","end_date":"2016-12-01","start_date":"2016-12-01"},"department":[{"_id":"DEP5023"}],"year":2016,"author":[{"last_name":"Pfeifer","id":"52097","full_name":"Pfeifer, Anton","first_name":"Anton"},{"orcid":"https://orcid.org/0000-0002-3325-7887","last_name":"Lohweg","id":"1804","full_name":"Lohweg, Volker","first_name":"Volker"}],"citation":{"short":"A. Pfeifer, V. Lohweg, in: V. Lohweg (Ed.), BVAu 2016, Hochschule Ostwestfalen-Lippe, Lemgo, 2016, pp. 1–9.","chicago-de":"Pfeifer, Anton und Volker Lohweg. 2016. Authentication of Commercial Raster Printing on Cost-Effective Hardware. In: BVAu 2016, hg. von Volker Lohweg, 2016:1–9. Lemgo: Hochschule Ostwestfalen-Lippe.","din1505-2-1":"Pfeifer, Anton ; Lohweg, Volker: Authentication of Commercial Raster Printing on Cost-Effective Hardware. In: Lohweg, V. (Hrsg.): BVAu 2016. Bd. 2016. Lemgo : Hochschule Ostwestfalen-Lippe, 2016, S. 1–9","van":"Pfeifer A, Lohweg V. Authentication of Commercial Raster Printing on Cost-Effective Hardware. In: Lohweg V, editor. BVAu 2016. Lemgo: Hochschule Ostwestfalen-Lippe; 2016. p. 1–9.","ama":"Pfeifer A, Lohweg V. Authentication of Commercial Raster Printing on Cost-Effective Hardware. In: Lohweg V, ed. BVAu 2016. Vol 2016. Lemgo: Hochschule Ostwestfalen-Lippe; 2016:1-9.","ufg":"Pfeifer, Anton/Lohweg, Volker (2016): Authentication of Commercial Raster Printing on Cost-Effective Hardware, in: Volker Lohweg (Hg.): BVAu 2016 (= 2016), Lemgo, S. 1–9.","bjps":"Pfeifer A and Lohweg V (2016) Authentication of Commercial Raster Printing on Cost-Effective Hardware. In Lohweg V (ed.), BVAu 2016, vol. 2016. Lemgo: Hochschule Ostwestfalen-Lippe, pp. 1–9.","havard":"A. Pfeifer, V. Lohweg, Authentication of Commercial Raster Printing on Cost-Effective Hardware, in: V. Lohweg (Ed.), BVAu 2016, Hochschule Ostwestfalen-Lippe, Lemgo, 2016: pp. 1–9.","mla":"Pfeifer, Anton, and Volker Lohweg. “Authentication of Commercial Raster Printing on Cost-Effective Hardware.” BVAu 2016, edited by Volker Lohweg, vol. 2016, no. 5, Hochschule Ostwestfalen-Lippe, 2016, pp. 1–9.","apa":"Pfeifer, A., & Lohweg, V. (2016). Authentication of Commercial Raster Printing on Cost-Effective Hardware. In V. Lohweg (Ed.), BVAu 2016 (Vol. 2016, pp. 1–9). Lemgo: Hochschule Ostwestfalen-Lippe.","ieee":"A. Pfeifer and V. Lohweg, “Authentication of Commercial Raster Printing on Cost-Effective Hardware,” in BVAu 2016, Lemgo, 2016, vol. 2016, no. 5, pp. 1–9.","chicago":"Pfeifer, Anton, and Volker Lohweg. “Authentication of Commercial Raster Printing on Cost-Effective Hardware.” In BVAu 2016, edited by Volker Lohweg, 2016:1–9. Lemgo: Hochschule Ostwestfalen-Lippe, 2016."},"volume":2016,"title":"Authentication of Commercial Raster Printing on Cost-Effective Hardware","_id":"4308","language":[{"iso":"eng"}],"place":"Lemgo","editor":[{"first_name":"Volker","full_name":"Lohweg, Volker","last_name":"Lohweg"}],"intvolume":" 2016","date_updated":"2023-03-15T13:49:51Z","user_id":"74004","type":"conference","date_created":"2021-01-05T09:55:03Z","publication_identifier":{"isbn":["978-3-9814062-7-6"]},"publication":"BVAu 2016"},{"language":[{"iso":"eng"}],"keyword":["Aesthetic intelligence","Aesthetics","Design methodologies","Ambient intelligent systems"],"oa":"1","date_updated":"2023-03-15T13:49:52Z","editor":[{"first_name":"WonJoon","last_name":"Chung","full_name":"Chung, WonJoon"},{"first_name":"Cliff Sungsoo ","full_name":"Shin, Cliff Sungsoo ","last_name":"Shin"}],"date_created":"2021-01-08T11:32:17Z","publication":"Advances in Affective and Pleasurable Design","publication_identifier":{"eisbn":["978-3-319-41661-8"],"isbn":["978-3-319-41660-1"]},"page":"385-390","status":"public","author":[{"first_name":"Daniela Alina","last_name":"Plewe","full_name":"Plewe, Daniela Alina"},{"first_name":"Carsten","last_name":"Röcker","id":"61525","full_name":"Röcker, Carsten"}],"year":2016,"main_file_link":[{"open_access":"1"}],"volume":483,"citation":{"short":"D.A. Plewe, C. Röcker, in: W. Chung, C.S. Shin (Eds.), Advances in Affective and Pleasurable Design, Springer, Cham, 2016, pp. 385–390.","din1505-2-1":"Plewe, Daniela Alina ; Röcker, Carsten: Aesthetic Intelligence for Effective and Pleasurable Design. In: Chung, W. ; Shin, C. S. (Hrsg.): Advances in Affective and Pleasurable Design, Aesthetic intelligence Aesthetics Design methodologies Ambient intelligent systems (AISC). Bd. 483. Cham : Springer, 2016, S. 385–390","chicago-de":"Plewe, Daniela Alina und Carsten Röcker. 2016. Aesthetic Intelligence for Effective and Pleasurable Design. In: Advances in Affective and Pleasurable Design, hg. von WonJoon Chung und Cliff Sungsoo Shin, 483:385–390. Aesthetic intelligence Aesthetics Design methodologies Ambient intelligent systems (AISC). Cham: Springer. doi:10.1007/978-3-319-41661-8_37, .","apa":"Plewe, D. A., & Röcker, C. (2016). Aesthetic Intelligence for Effective and Pleasurable Design. In W. Chung & C. S. Shin (Eds.), Advances in Affective and Pleasurable Design (Vol. 483, pp. 385–390). Cham: Springer. https://doi.org/10.1007/978-3-319-41661-8_37","ieee":"D. A. Plewe and C. Röcker, “Aesthetic Intelligence for Effective and Pleasurable Design,” in Advances in Affective and Pleasurable Design, Walt Disney World®, Florida, USA, 2016, vol. 483, pp. 385–390.","chicago":"Plewe, Daniela Alina, and Carsten Röcker. “Aesthetic Intelligence for Effective and Pleasurable Design.” In Advances in Affective and Pleasurable Design, edited by WonJoon Chung and Cliff Sungsoo Shin, 483:385–90. Aesthetic Intelligence Aesthetics Design Methodologies Ambient Intelligent Systems (AISC). Cham: Springer, 2016. https://doi.org/10.1007/978-3-319-41661-8_37.","van":"Plewe DA, Röcker C. Aesthetic Intelligence for Effective and Pleasurable Design. In: Chung W, Shin CS, editors. Advances in Affective and Pleasurable Design. Cham: Springer; 2016. p. 385–90. (Aesthetic intelligence Aesthetics Design methodologies Ambient intelligent systems (AISC); vol. 483).","ama":"Plewe DA, Röcker C. Aesthetic Intelligence for Effective and Pleasurable Design. In: Chung W, Shin CS, eds. Advances in Affective and Pleasurable Design. Vol 483. Aesthetic intelligence Aesthetics Design methodologies Ambient intelligent systems (AISC). Cham: Springer; 2016:385-390. doi:10.1007/978-3-319-41661-8_37","ufg":"Plewe, Daniela Alina/Röcker, Carsten (2016): Aesthetic Intelligence for Effective and Pleasurable Design, in: WonJoon Chung/Cliff Sungsoo Shin (Hgg.): Advances in Affective and Pleasurable Design (=Aesthetic intelligence Aesthetics Design methodologies Ambient intelligent systems (AISC) 483), Cham, S. 385–390.","havard":"D.A. Plewe, C. Röcker, Aesthetic Intelligence for Effective and Pleasurable Design, in: W. Chung, C.S. Shin (Eds.), Advances in Affective and Pleasurable Design, Springer, Cham, 2016: pp. 385–390.","mla":"Plewe, Daniela Alina, and Carsten Röcker. “Aesthetic Intelligence for Effective and Pleasurable Design.” Advances in Affective and Pleasurable Design, edited by WonJoon Chung and Cliff Sungsoo Shin, vol. 483, Springer, 2016, pp. 385–90, doi:10.1007/978-3-319-41661-8_37.","bjps":"Plewe DA and Röcker C (2016) Aesthetic Intelligence for Effective and Pleasurable Design. In Chung W and Shin CS (eds), Advances in Affective and Pleasurable Design, vol. 483. Cham: Springer, pp. 385–390."},"title":"Aesthetic Intelligence for Effective and Pleasurable Design","place":"Cham","doi":"10.1007/978-3-319-41661-8_37","_id":"4328","user_id":"15514","intvolume":" 483","type":"conference","publisher":"Springer","department":[{"_id":"DEP5023"}],"conference":{"name":"AHFE 2016 International Conference on Affective and Pleasurable Design","location":"Walt Disney World®, Florida, USA","end_date":"2016-07-31","start_date":"2016-07-27"},"abstract":[{"text":"This paper discusses the relevance of beauty and aesthetic values for an aesthetically pleasing design of technology-enhanced spaces in the context of ergonomics, usability, and technology acceptance. Under the concept of Aesthetic Intelligence we subsume various aspects, including conceptual scoping, formal design skills and creative methodologies. Our goal is to provide a concept for the exchange of ideas, initiation of collaborations and the development of methodological practices for facilitating effective and pleasurable designs.","lang":"eng"}],"publication_status":"published","series_title":"Aesthetic intelligence Aesthetics Design methodologies Ambient intelligent systems (AISC)"},{"citation":{"ufg":"Zapp, Jürgen/Pfender, S./Schneider, Jan: Stabilität eines Melatonin-haltigen funktionellen Getränkes, in: o. Hg.: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, o. O. 2016.","bjps":"Zapp J, Pfender S and Schneider J (2016) Stabilität eines Melatonin-haltigen funktionellen Getränkes. GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016.","havard":"J. Zapp, S. Pfender, J. Schneider, Stabilität eines Melatonin-haltigen funktionellen Getränkes, in: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","mla":"Zapp, Jürgen, et al. “Stabilität eines Melatonin-haltigen funktionellen Getränkes.” GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","van":"Zapp J, Pfender S, Schneider J. Stabilität eines Melatonin-haltigen funktionellen Getränkes. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20-22102016. 2016.","chicago":"Zapp, Jürgen, S. Pfender, and Jan Schneider. “Stabilität eines Melatonin-haltigen funktionellen Getränkes.” In GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","apa":"Zapp, J., Pfender, S., & Schneider, J. (2016). Stabilität eines Melatonin-haltigen funktionellen Getränkes. GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016. GDL-Kongress Lebensmitteltechnologie, Lemgo.","chicago-de":"Zapp, Jürgen, S. Pfender und Jan Schneider. 2016. Stabilität eines Melatonin-haltigen funktionellen Getränkes. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016.","din1505-2-1":"Zapp, Jürgen ; Pfender, S. ; Schneider, Jan: Stabilität eines Melatonin-haltigen funktionellen Getränkes. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016","short":"J. Zapp, S. Pfender, J. Schneider, in: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","ama":"Zapp J, Pfender S, Schneider J. Stabilität eines Melatonin-haltigen funktionellen Getränkes. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016. ; 2016.","ieee":"J. Zapp, S. Pfender, and J. Schneider, “Stabilität eines Melatonin-haltigen funktionellen Getränkes,” presented at the GDL-Kongress Lebensmitteltechnologie, Lemgo, 2016."},"publication_status":"published","title":"Stabilität eines Melatonin-haltigen funktionellen Getränkes","status":"public","author":[{"first_name":"Jürgen","full_name":"Zapp, Jürgen","id":"12568","last_name":"Zapp"},{"full_name":"Pfender, S.","last_name":"Pfender","first_name":"S."},{"orcid":"0000-0001-6401-8873","first_name":"Jan","full_name":"Schneider, Jan","id":"13209","last_name":"Schneider"}],"year":"2016","department":[{"_id":"DEP4023"},{"_id":"DEP4026"},{"_id":"DEP4018"}],"conference":{"start_date":"2016-10-20","end_date":"2016-10-22","location":"Lemgo","name":"GDL-Kongress Lebensmitteltechnologie"},"user_id":"83779","date_updated":"2024-05-22T09:56:01Z","publication":"GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016","type":"conference","date_created":"2021-04-14T13:17:39Z","language":[{"iso":"ger"}],"_id":"5535"},{"author":[{"last_name":"Kothe","first_name":"Achim","id":"43951","full_name":"Kothe, Achim"},{"last_name":"Krieger","first_name":"O.","full_name":"Krieger, O."},{"first_name":"Leopold","last_name":"Seidel","id":"66756","full_name":"Seidel, Leopold"},{"first_name":"Timo","full_name":"Nolte, Timo","id":"77670","last_name":"Nolte"},{"last_name":"Zapp","full_name":"Zapp, Jürgen","first_name":"Jürgen","id":"12568"}],"year":"2016","department":[{"_id":"DEP4023"},{"_id":"DEP4026"}],"conference":{"location":"Lemgo","name":"GDL-Kongress Lebensmitteltechnologie","end_date":"2016-10-22","start_date":"2016-10-20"},"status":"public","title":"Antioxidantien in Tee - HPLC-Screening mittels Nachsäulenderivatisierung","citation":{"ieee":"A. Kothe, O. Krieger, L. Seidel, T. Nolte, and J. Zapp, “Antioxidantien in Tee - HPLC-Screening mittels Nachsäulenderivatisierung,” presented at the GDL-Kongress Lebensmitteltechnologie, Lemgo, 2016.","ama":"Kothe A, Krieger O, Seidel L, Nolte T, Zapp J. Antioxidantien in Tee - HPLC-Screening mittels Nachsäulenderivatisierung. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016. ; 2016.","apa":"Kothe, A., Krieger, O., Seidel, L., Nolte, T., & Zapp, J. (2016). Antioxidantien in Tee - HPLC-Screening mittels Nachsäulenderivatisierung. GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016. GDL-Kongress Lebensmitteltechnologie, Lemgo.","chicago":"Kothe, Achim, O. Krieger, Leopold Seidel, Timo Nolte, and Jürgen Zapp. “Antioxidantien in Tee - HPLC-Screening mittels Nachsäulenderivatisierung.” In GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","van":"Kothe A, Krieger O, Seidel L, Nolte T, Zapp J. Antioxidantien in Tee - HPLC-Screening mittels Nachsäulenderivatisierung. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20-22102016. 2016.","mla":"Kothe, Achim, et al. “Antioxidantien in Tee - HPLC-Screening mittels Nachsäulenderivatisierung.” GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","havard":"A. Kothe, O. Krieger, L. Seidel, T. Nolte, J. Zapp, Antioxidantien in Tee - HPLC-Screening mittels Nachsäulenderivatisierung, in: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","bjps":"Kothe A et al. (2016) Antioxidantien in Tee - HPLC-Screening mittels Nachsäulenderivatisierung. GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016.","ufg":"Kothe, Achim u. a.: Antioxidantien in Tee - HPLC-Screening mittels Nachsäulenderivatisierung, in: o. Hg.: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, o. O. 2016.","short":"A. Kothe, O. Krieger, L. Seidel, T. Nolte, J. Zapp, in: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","chicago-de":"Kothe, Achim, O. Krieger, Leopold Seidel, Timo Nolte und Jürgen Zapp. 2016. Antioxidantien in Tee - HPLC-Screening mittels Nachsäulenderivatisierung. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016.","din1505-2-1":"Kothe, Achim ; Krieger, O. ; Seidel, Leopold ; Nolte, Timo ; Zapp, Jürgen: Antioxidantien in Tee - HPLC-Screening mittels Nachsäulenderivatisierung. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016"},"publication_status":"published","_id":"5536","language":[{"iso":"ger"}],"publication":"GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016","type":"conference","date_created":"2021-04-14T13:17:39Z","user_id":"83778","date_updated":"2024-04-29T10:34:42Z"},{"date_updated":"2024-04-29T10:35:00Z","user_id":"83778","type":"conference","date_created":"2021-04-14T13:17:39Z","publication":"GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016","language":[{"iso":"ger"}],"_id":"5537","publication_status":"published","citation":{"short":"L. Seidel, A. Kothe, J. Zapp, in: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","chicago-de":"Seidel, Leopold, Achim Kothe und Jürgen Zapp. 2016. Triterpene in der Apfelschale von alten und neuen Apfelsorten. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016.","din1505-2-1":"Seidel, Leopold ; Kothe, Achim ; Zapp, Jürgen: Triterpene in der Apfelschale von alten und neuen Apfelsorten. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016","apa":"Seidel, L., Kothe, A., & Zapp, J. (2016). Triterpene in der Apfelschale von alten und neuen Apfelsorten. GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016. GDL-Kongress Lebensmitteltechnologie, Lemgo.","chicago":"Seidel, Leopold, Achim Kothe, and Jürgen Zapp. “Triterpene in der Apfelschale von alten und neuen Apfelsorten.” In GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","van":"Seidel L, Kothe A, Zapp J. Triterpene in der Apfelschale von alten und neuen Apfelsorten. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20-22102016. 2016.","bjps":"Seidel L, Kothe A and Zapp J (2016) Triterpene in der Apfelschale von alten und neuen Apfelsorten. GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016.","havard":"L. Seidel, A. Kothe, J. Zapp, Triterpene in der Apfelschale von alten und neuen Apfelsorten, in: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","mla":"Seidel, Leopold, et al. “Triterpene in der Apfelschale von alten und neuen Apfelsorten.” GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","ufg":"Seidel, Leopold/Kothe, Achim/Zapp, Jürgen: Triterpene in der Apfelschale von alten und neuen Apfelsorten, in: o. Hg.: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, o. O. 2016.","ieee":"L. Seidel, A. Kothe, and J. Zapp, “Triterpene in der Apfelschale von alten und neuen Apfelsorten,” presented at the GDL-Kongress Lebensmitteltechnologie, Lemgo, 2016.","ama":"Seidel L, Kothe A, Zapp J. Triterpene in der Apfelschale von alten und neuen Apfelsorten. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016. ; 2016."},"title":"Triterpene in der Apfelschale von alten und neuen Apfelsorten","status":"public","department":[{"_id":"DEP4023"},{"_id":"DEP4026"}],"conference":{"location":"Lemgo","name":"GDL-Kongress Lebensmitteltechnologie","start_date":"2016-10-20","end_date":"2016-10-22"},"year":"2016","author":[{"first_name":"Leopold","last_name":"Seidel","id":"66756","full_name":"Seidel, Leopold"},{"first_name":"Achim","last_name":"Kothe","full_name":"Kothe, Achim","id":"43951"},{"id":"12568","first_name":"Jürgen","last_name":"Zapp","full_name":"Zapp, Jürgen"}]},{"title":"Fünf Jahre ILT.NRW","publication_status":"published","citation":{"bjps":"Danneel H-J (2016) Fünf Jahre ILT.NRW. GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016.","havard":"H.-J. Danneel, Fünf Jahre ILT.NRW, in: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","mla":"Danneel, Hans-Jürgen. “Fünf Jahre ILT.NRW.” GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","ufg":"Danneel, Hans-Jürgen: Fünf Jahre ILT.NRW, in: o. Hg.: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, o. O. 2016.","van":"Danneel HJ. Fünf Jahre ILT.NRW. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20-22102016. 2016.","chicago":"Danneel, Hans-Jürgen. “Fünf Jahre ILT.NRW.” In GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","apa":"Danneel, H.-J. (2016). Fünf Jahre ILT.NRW. GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016. GDL-Kongress Lebensmitteltechnologie, Lemgo.","din1505-2-1":"Danneel, Hans-Jürgen: Fünf Jahre ILT.NRW. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016","chicago-de":"Danneel, Hans-Jürgen. 2016. Fünf Jahre ILT.NRW. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016.","short":"H.-J. Danneel, in: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","ama":"Danneel HJ. Fünf Jahre ILT.NRW. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016. ; 2016.","ieee":"H.-J. Danneel, “Fünf Jahre ILT.NRW,” presented at the GDL-Kongress Lebensmitteltechnologie, Lemgo, 2016."},"department":[{"_id":"DEP4023"},{"_id":"DEP4027"}],"conference":{"end_date":"2016-10-22","start_date":"2016-10-20","location":"Lemgo","name":"GDL-Kongress Lebensmitteltechnologie"},"year":"2016","author":[{"id":"12231","first_name":"Hans-Jürgen","last_name":"Danneel","full_name":"Danneel, Hans-Jürgen"}],"status":"public","type":"conference","date_created":"2021-04-14T13:17:39Z","publication":"GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016","date_updated":"2024-05-17T13:35:45Z","user_id":"83781","_id":"5538","language":[{"iso":"ger"}]},{"publication_status":"published","citation":{"ieee":"J. Tachil, H. van Bracht, and H.-J. Danneel, “Prozesschromatographische Fraktionierung von Proteinhydrolysaten,” presented at the GDL-Kongress Lebensmitteltechnologie, Lemgo, 2016.","ama":"Tachil J, van Bracht H, Danneel HJ. Prozesschromatographische Fraktionierung von Proteinhydrolysaten. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016. ; 2016.","short":"J. Tachil, H. van Bracht, H.-J. Danneel, in: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","chicago-de":"Tachil, Jörg, Hendrik van Bracht und Hans-Jürgen Danneel. 2016. Prozesschromatographische Fraktionierung von Proteinhydrolysaten. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016.","din1505-2-1":"Tachil, Jörg ; van Bracht, Hendrik ; Danneel, Hans-Jürgen: Prozesschromatographische Fraktionierung von Proteinhydrolysaten. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016","apa":"Tachil, J., van Bracht, H., & Danneel, H.-J. (2016). Prozesschromatographische Fraktionierung von Proteinhydrolysaten. GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016. GDL-Kongress Lebensmitteltechnologie, Lemgo.","chicago":"Tachil, Jörg, Hendrik van Bracht, and Hans-Jürgen Danneel. “Prozesschromatographische Fraktionierung von Proteinhydrolysaten.” In GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","van":"Tachil J, van Bracht H, Danneel HJ. Prozesschromatographische Fraktionierung von Proteinhydrolysaten. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20-22102016. 2016.","ufg":"Tachil, Jörg/Bracht, Hendrik van/Danneel, Hans-Jürgen: Prozesschromatographische Fraktionierung von Proteinhydrolysaten, in: o. Hg.: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, o. O. 2016.","bjps":"Tachil J, van Bracht H and Danneel H-J (2016) Prozesschromatographische Fraktionierung von Proteinhydrolysaten. GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016.","mla":"Tachil, Jörg, et al. “Prozesschromatographische Fraktionierung von Proteinhydrolysaten.” GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","havard":"J. Tachil, H. van Bracht, H.-J. Danneel, Prozesschromatographische Fraktionierung von Proteinhydrolysaten, in: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016."},"title":"Prozesschromatographische Fraktionierung von Proteinhydrolysaten","status":"public","conference":{"name":"GDL-Kongress Lebensmitteltechnologie","location":"Lemgo","start_date":"2016-10-20","end_date":"2016-10-22"},"department":[{"_id":"DEP4023"},{"_id":"DEP4027"}],"year":"2016","author":[{"full_name":"Tachil, Jörg","first_name":"Jörg","last_name":"Tachil","id":"49025"},{"first_name":"Hendrik","last_name":"van Bracht","full_name":"van Bracht, Hendrik","id":"85806"},{"id":"12231","last_name":"Danneel","full_name":"Danneel, Hans-Jürgen","first_name":"Hans-Jürgen"}],"date_updated":"2024-04-29T10:20:09Z","user_id":"83778","type":"conference","date_created":"2021-04-14T13:17:39Z","publication":"GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016","language":[{"iso":"ger"}],"_id":"5540"},{"_id":"5541","place":"Bonn","language":[{"iso":"ger"}],"publication":"GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016","date_created":"2021-04-14T13:17:39Z","type":"conference_editor_article","corporate_editor":["Gesellschaft Deutscher Lebensmitteltechnologen"],"editor":[{"last_name":"Buckenhüskes","first_name":"Herbert J.","full_name":"Buckenhüskes, Herbert J."}],"user_id":"65129","date_updated":"2024-06-26T13:49:51Z","year":"2016","author":[{"first_name":"Norbert","last_name":"Reichl","full_name":"Reichl, Norbert"},{"full_name":"Brunklaus, Sabine","first_name":"Sabine","last_name":"Brunklaus","id":"65129"},{"first_name":"Hans-Jürgen","id":"12231","full_name":"Danneel, Hans-Jürgen","last_name":"Danneel"},{"id":"12119","full_name":"Müller, Ulrich","last_name":"Müller","first_name":"Ulrich"},{"id":"68590","first_name":"Simone","full_name":"Gebauer, Simone","last_name":"Gebauer"},{"first_name":"Beate","last_name":"Kolkmann","full_name":"Kolkmann, Beate"},{"last_name":"Höfel","first_name":"Sabine","full_name":"Höfel, Sabine"}],"conference":{"end_date":"2016-10-22","start_date":"2016-10-20","location":"Lemgo","name":"GDL-Kongress Lebensmitteltechnologie"},"department":[{"_id":"DEP4023"},{"_id":"DEP4027"}],"publisher":"Gesellschaft Deutscher Lebensmitteltechnologen","status":"public","title":"Lebensmittel 4.0 - Chancen für den Mittelstand? Ergebnisse einer Unternehmensbefragung. Welche Chancen und Potentiale birgt das Thema Digitalisierung? Wir befragten - Unternehmen antworteten","citation":{"apa":"Reichl, N., Brunklaus, S., Danneel, H.-J., Müller, U., Gebauer, S., Kolkmann, B., & Höfel, S. (2016). Lebensmittel 4.0 - Chancen für den Mittelstand? Ergebnisse einer Unternehmensbefragung. Welche Chancen und Potentiale birgt das Thema Digitalisierung? Wir befragten - Unternehmen antworteten. In H. J. Buckenhüskes & Gesellschaft Deutscher Lebensmitteltechnologen (Eds.), GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016. Gesellschaft Deutscher Lebensmitteltechnologen.","chicago":"Reichl, Norbert, Sabine Brunklaus, Hans-Jürgen Danneel, Ulrich Müller, Simone Gebauer, Beate Kolkmann, and Sabine Höfel. Lebensmittel 4.0 - Chancen für den Mittelstand? Ergebnisse einer Unternehmensbefragung. Welche Chancen und Potentiale birgt das Thema Digitalisierung? Wir befragten - Unternehmen antworteten. Edited by Herbert J. Buckenhüskes and Gesellschaft Deutscher Lebensmitteltechnologen. GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016. Bonn: Gesellschaft Deutscher Lebensmitteltechnologen, 2016.","van":"Reichl N, Brunklaus S, Danneel HJ, Müller U, Gebauer S, Kolkmann B, et al. Lebensmittel 4.0 - Chancen für den Mittelstand? Ergebnisse einer Unternehmensbefragung. Welche Chancen und Potentiale birgt das Thema Digitalisierung? Wir befragten - Unternehmen antworteten. Buckenhüskes HJ, Gesellschaft Deutscher Lebensmitteltechnologen, editors. GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016. Bonn: Gesellschaft Deutscher Lebensmitteltechnologen; 2016.","ufg":"Reichl, Norbert u. a.: Lebensmittel 4.0 - Chancen für den Mittelstand? Ergebnisse einer Unternehmensbefragung. Welche Chancen und Potentiale birgt das Thema Digitalisierung? Wir befragten - Unternehmen antworteten, hg. von Buckenhüskes, Herbert J., Gesellschaft Deutscher Lebensmitteltechnologen, Bonn 2016.","bjps":"Reichl N et al. (2016) Lebensmittel 4.0 - Chancen für den Mittelstand? Ergebnisse einer Unternehmensbefragung. Welche Chancen und Potentiale birgt das Thema Digitalisierung? Wir befragten - Unternehmen antworteten, Buckenhüskes HJ and Gesellschaft Deutscher Lebensmitteltechnologen (eds). Bonn: Gesellschaft Deutscher Lebensmitteltechnologen.","havard":"N. Reichl, S. Brunklaus, H.-J. Danneel, U. Müller, S. Gebauer, B. Kolkmann, S. Höfel, Lebensmittel 4.0 - Chancen für den Mittelstand? Ergebnisse einer Unternehmensbefragung. Welche Chancen und Potentiale birgt das Thema Digitalisierung? Wir befragten - Unternehmen antworteten, Gesellschaft Deutscher Lebensmitteltechnologen, Bonn, 2016.","mla":"Reichl, Norbert, et al. “Lebensmittel 4.0 - Chancen für den Mittelstand? Ergebnisse einer Unternehmensbefragung. Welche Chancen und Potentiale birgt das Thema Digitalisierung? Wir befragten - Unternehmen antworteten.” GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, edited by Herbert J. Buckenhüskes and Gesellschaft Deutscher Lebensmitteltechnologen, Gesellschaft Deutscher Lebensmitteltechnologen, 2016.","short":"N. Reichl, S. Brunklaus, H.-J. Danneel, U. Müller, S. Gebauer, B. Kolkmann, S. Höfel, Lebensmittel 4.0 - Chancen für den Mittelstand? Ergebnisse einer Unternehmensbefragung. Welche Chancen und Potentiale birgt das Thema Digitalisierung? Wir befragten - Unternehmen antworteten, Gesellschaft Deutscher Lebensmitteltechnologen, Bonn, 2016.","chicago-de":"Reichl, Norbert, Sabine Brunklaus, Hans-Jürgen Danneel, Ulrich Müller, Simone Gebauer, Beate Kolkmann und Sabine Höfel. 2016. Lebensmittel 4.0 - Chancen für den Mittelstand? Ergebnisse einer Unternehmensbefragung. Welche Chancen und Potentiale birgt das Thema Digitalisierung? Wir befragten - Unternehmen antworteten. Hg. von Herbert J. Buckenhüskes und Gesellschaft Deutscher Lebensmitteltechnologen. GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016. Bonn: Gesellschaft Deutscher Lebensmitteltechnologen.","din1505-2-1":"Reichl, Norbert ; Brunklaus, Sabine ; Danneel, Hans-Jürgen ; Müller, Ulrich ; Gebauer, Simone ; Kolkmann, Beate ; Höfel, Sabine ; Buckenhüskes, H. J. ; Gesellschaft Deutscher Lebensmitteltechnologen (Hrsg.): Lebensmittel 4.0 - Chancen für den Mittelstand? Ergebnisse einer Unternehmensbefragung. Welche Chancen und Potentiale birgt das Thema Digitalisierung? Wir befragten - Unternehmen antworteten. Bonn : Gesellschaft Deutscher Lebensmitteltechnologen, 2016","ieee":"N. Reichl et al., Lebensmittel 4.0 - Chancen für den Mittelstand? Ergebnisse einer Unternehmensbefragung. Welche Chancen und Potentiale birgt das Thema Digitalisierung? Wir befragten - Unternehmen antworteten. Bonn: Gesellschaft Deutscher Lebensmitteltechnologen, 2016.","ama":"Reichl N, Brunklaus S, Danneel HJ, et al. Lebensmittel 4.0 - Chancen für den Mittelstand? Ergebnisse einer Unternehmensbefragung. Welche Chancen und Potentiale birgt das Thema Digitalisierung? Wir befragten - Unternehmen antworteten. (Buckenhüskes HJ, Gesellschaft Deutscher Lebensmitteltechnologen, eds.). Gesellschaft Deutscher Lebensmitteltechnologen; 2016."},"publication_status":"published"},{"status":"public","conference":{"start_date":"2016-10-24","name":"TWA der VLB Berlin e. V.","location":"Berlin"},"department":[{"_id":"DEP4023"},{"_id":"DEP1308"},{"_id":"DEP4018"}],"year":"2016","author":[{"full_name":"Schneider, Jan","last_name":"Schneider","id":"13209","first_name":"Jan","orcid":"0000-0001-6401-8873"}],"publication_status":"published","citation":{"ieee":"J. Schneider, “Smart Food Technology – eine neue Partnerschaftinitiative von Hochschule und Industrie: welches Potenzial hat die Digitalisierung?,” presented at the TWA der VLB Berlin e. V., Berlin, 2016.","apa":"Schneider, J. (2016). Smart Food Technology – eine neue Partnerschaftinitiative von Hochschule und Industrie: welches Potenzial hat die Digitalisierung? TWA der VLB Berlin e. V., Berlin, 24.10.2016. TWA der VLB Berlin e. V., Berlin.","chicago":"Schneider, Jan. “Smart Food Technology – eine neue Partnerschaftinitiative von Hochschule und Industrie: welches Potenzial hat die Digitalisierung?” In TWA der VLB Berlin e. V., Berlin, 24.10.2016, 2016.","ama":"Schneider J. Smart Food Technology – eine neue Partnerschaftinitiative von Hochschule und Industrie: welches Potenzial hat die Digitalisierung? In: TWA der VLB Berlin e. V., Berlin, 24.10.2016. ; 2016.","van":"Schneider J. Smart Food Technology – eine neue Partnerschaftinitiative von Hochschule und Industrie: welches Potenzial hat die Digitalisierung? In: TWA der VLB Berlin e V, Berlin, 24102016. 2016.","mla":"Schneider, Jan. “Smart Food Technology – eine neue Partnerschaftinitiative von Hochschule und Industrie: welches Potenzial hat die Digitalisierung?” TWA der VLB Berlin e. V., Berlin, 24.10.2016, 2016.","havard":"J. Schneider, Smart Food Technology – eine neue Partnerschaftinitiative von Hochschule und Industrie: welches Potenzial hat die Digitalisierung?, in: TWA der VLB Berlin e. V., Berlin, 24.10.2016, 2016.","bjps":"Schneider J (2016) Smart Food Technology – eine neue Partnerschaftinitiative von Hochschule und Industrie: welches Potenzial hat die Digitalisierung? TWA der VLB Berlin e. V., Berlin, 24.10.2016.","ufg":"Schneider, Jan: Smart Food Technology – eine neue Partnerschaftinitiative von Hochschule und Industrie: welches Potenzial hat die Digitalisierung?, in: o. Hg.: TWA der VLB Berlin e. V., Berlin, 24.10.2016, o. O. 2016.","short":"J. Schneider, in: TWA der VLB Berlin e. V., Berlin, 24.10.2016, 2016.","din1505-2-1":"Schneider, Jan: Smart Food Technology – eine neue Partnerschaftinitiative von Hochschule und Industrie: welches Potenzial hat die Digitalisierung? In: TWA der VLB Berlin e. V., Berlin, 24.10.2016, 2016","chicago-de":"Schneider, Jan. 2016. Smart Food Technology – eine neue Partnerschaftinitiative von Hochschule und Industrie: welches Potenzial hat die Digitalisierung? In: TWA der VLB Berlin e. V., Berlin, 24.10.2016."},"title":"Smart Food Technology – eine neue Partnerschaftinitiative von Hochschule und Industrie: welches Potenzial hat die Digitalisierung?","_id":"5544","language":[{"iso":"ger"}],"date_updated":"2024-05-22T09:56:40Z","user_id":"83779","type":"conference","date_created":"2021-04-15T09:05:07Z","publication":"TWA der VLB Berlin e. V., Berlin, 24.10.2016"},{"_id":"5545","language":[{"iso":"eng"}],"type":"conference","date_created":"2021-04-15T09:12:23Z","publication":"2. Fachforum Biologische Methanisierung, Regensburg, 25.10.2016","date_updated":"2024-05-22T09:57:11Z","user_id":"83779","department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"conference":{"location":"Regensburg","name":"2. Fachforum Biologische Methanisierung","start_date":"2016-10-25"},"year":"2016","author":[{"last_name":"Hoffarth","id":"52330","full_name":"Hoffarth, Marc","first_name":"Marc"},{"id":"43927","last_name":"Broeker","first_name":"Timo","full_name":"Broeker, Timo"},{"first_name":"V.","last_name":"Wolff","full_name":"Wolff, V."},{"first_name":"C.","full_name":"Mengedoth, C.","last_name":"Mengedoth"},{"full_name":"Heikrodt, Klaus","last_name":"Heikrodt","id":"46269","first_name":"Klaus"},{"full_name":"Schneider, Jan","last_name":"Schneider","id":"13209","first_name":"Jan","orcid":"0000-0001-6401-8873"}],"status":"public","title":" \tSynergies between biocatalytic methanation of Power-To-Gas hydrogen with carbon dioxide from alcoholic fermentation","publication_status":"published","citation":{"ieee":"M. Hoffarth, T. Broeker, V. Wolff, C. Mengedoth, K. Heikrodt, and J. Schneider, “ Synergies between biocatalytic methanation of Power-To-Gas hydrogen with carbon dioxide from alcoholic fermentation,” presented at the 2. Fachforum Biologische Methanisierung, Regensburg, 2016.","apa":"Hoffarth, M., Broeker, T., Wolff, V., Mengedoth, C., Heikrodt, K., & Schneider, J. (2016). Synergies between biocatalytic methanation of Power-To-Gas hydrogen with carbon dioxide from alcoholic fermentation. 2. Fachforum Biologische Methanisierung, Regensburg, 25.10.2016. 2. Fachforum Biologische Methanisierung, Regensburg.","chicago":"Hoffarth, Marc, Timo Broeker, V. Wolff, C. Mengedoth, Klaus Heikrodt, and Jan Schneider. “ Synergies between Biocatalytic Methanation of Power-To-Gas Hydrogen with Carbon Dioxide from Alcoholic Fermentation.” In 2. Fachforum Biologische Methanisierung, Regensburg, 25.10.2016, 2016.","ama":"Hoffarth M, Broeker T, Wolff V, Mengedoth C, Heikrodt K, Schneider J. Synergies between biocatalytic methanation of Power-To-Gas hydrogen with carbon dioxide from alcoholic fermentation. In: 2. Fachforum Biologische Methanisierung, Regensburg, 25.10.2016. ; 2016.","van":"Hoffarth M, Broeker T, Wolff V, Mengedoth C, Heikrodt K, Schneider J. Synergies between biocatalytic methanation of Power-To-Gas hydrogen with carbon dioxide from alcoholic fermentation. In: 2 Fachforum Biologische Methanisierung, Regensburg, 25102016. 2016.","havard":"M. Hoffarth, T. Broeker, V. Wolff, C. Mengedoth, K. Heikrodt, J. Schneider, Synergies between biocatalytic methanation of Power-To-Gas hydrogen with carbon dioxide from alcoholic fermentation, in: 2. Fachforum Biologische Methanisierung, Regensburg, 25.10.2016, 2016.","bjps":"Hoffarth M et al. (2016) Synergies between Biocatalytic Methanation of Power-To-Gas Hydrogen with Carbon Dioxide from Alcoholic Fermentation. 2. Fachforum Biologische Methanisierung, Regensburg, 25.10.2016.","mla":"Hoffarth, Marc, et al. “ Synergies between Biocatalytic Methanation of Power-To-Gas Hydrogen with Carbon Dioxide from Alcoholic Fermentation.” 2. Fachforum Biologische Methanisierung, Regensburg, 25.10.2016, 2016.","ufg":"Hoffarth, Marc u. a.: Synergies between biocatalytic methanation of Power-To-Gas hydrogen with carbon dioxide from alcoholic fermentation, in: o. Hg.: 2. Fachforum Biologische Methanisierung, Regensburg, 25.10.2016, o. O. 2016.","short":"M. Hoffarth, T. Broeker, V. Wolff, C. Mengedoth, K. Heikrodt, J. Schneider, in: 2. Fachforum Biologische Methanisierung, Regensburg, 25.10.2016, 2016.","chicago-de":"Hoffarth, Marc, Timo Broeker, V. Wolff, C. Mengedoth, Klaus Heikrodt und Jan Schneider. 2016. Synergies between biocatalytic methanation of Power-To-Gas hydrogen with carbon dioxide from alcoholic fermentation. In: 2. Fachforum Biologische Methanisierung, Regensburg, 25.10.2016.","din1505-2-1":"Hoffarth, Marc ; Broeker, Timo ; Wolff, V. ; Mengedoth, C. ; Heikrodt, Klaus ; Schneider, Jan: Synergies between biocatalytic methanation of Power-To-Gas hydrogen with carbon dioxide from alcoholic fermentation. In: 2. Fachforum Biologische Methanisierung, Regensburg, 25.10.2016, 2016"}},{"title":"Hochschule Ostwestfalen-Lippe: vom Bachelor über den Master zur Promotion am Graduiertenzentrum OWL","publication_status":"published","citation":{"ama":"Schneider J. Hochschule Ostwestfalen-Lippe: vom Bachelor über den Master zur Promotion am Graduiertenzentrum OWL. In: Forum Brau Beviale, Nürnberg, 10.11.2016. ; 2016.","ieee":"J. Schneider, “Hochschule Ostwestfalen-Lippe: vom Bachelor über den Master zur Promotion am Graduiertenzentrum OWL,” presented at the Forum Brau Beviale, Nürnberg, 2016.","din1505-2-1":"Schneider, Jan: Hochschule Ostwestfalen-Lippe: vom Bachelor über den Master zur Promotion am Graduiertenzentrum OWL. In: Forum Brau Beviale, Nürnberg, 10.11.2016, 2016","chicago-de":"Schneider, Jan. 2016. Hochschule Ostwestfalen-Lippe: vom Bachelor über den Master zur Promotion am Graduiertenzentrum OWL. In: Forum Brau Beviale, Nürnberg, 10.11.2016.","short":"J. Schneider, in: Forum Brau Beviale, Nürnberg, 10.11.2016, 2016.","ufg":"Schneider, Jan: Hochschule Ostwestfalen-Lippe: vom Bachelor über den Master zur Promotion am Graduiertenzentrum OWL, in: o. Hg.: Forum Brau Beviale, Nürnberg, 10.11.2016, o. O. 2016.","havard":"J. Schneider, Hochschule Ostwestfalen-Lippe: vom Bachelor über den Master zur Promotion am Graduiertenzentrum OWL, in: Forum Brau Beviale, Nürnberg, 10.11.2016, 2016.","bjps":"Schneider J (2016) Hochschule Ostwestfalen-Lippe: vom Bachelor über den Master zur Promotion am Graduiertenzentrum OWL. Forum Brau Beviale, Nürnberg, 10.11.2016.","mla":"Schneider, Jan. “Hochschule Ostwestfalen-Lippe: vom Bachelor über den Master zur Promotion am Graduiertenzentrum OWL.” Forum Brau Beviale, Nürnberg, 10.11.2016, 2016.","van":"Schneider J. Hochschule Ostwestfalen-Lippe: vom Bachelor über den Master zur Promotion am Graduiertenzentrum OWL. In: Forum Brau Beviale, Nürnberg, 10112016. 2016.","chicago":"Schneider, Jan. “Hochschule Ostwestfalen-Lippe: vom Bachelor über den Master zur Promotion am Graduiertenzentrum OWL.” In Forum Brau Beviale, Nürnberg, 10.11.2016, 2016.","apa":"Schneider, J. (2016). Hochschule Ostwestfalen-Lippe: vom Bachelor über den Master zur Promotion am Graduiertenzentrum OWL. Forum Brau Beviale, Nürnberg, 10.11.2016. Forum Brau Beviale, Nürnberg."},"department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"conference":{"location":"Nürnberg","name":"Forum Brau Beviale","start_date":"2016-11-10"},"year":"2016","author":[{"full_name":"Schneider, Jan","id":"13209","first_name":"Jan","last_name":"Schneider","orcid":"0000-0001-6401-8873"}],"status":"public","date_created":"2021-04-15T09:14:38Z","type":"conference","publication":"Forum Brau Beviale, Nürnberg, 10.11.2016","date_updated":"2024-05-22T09:57:41Z","user_id":"83779","language":[{"iso":"ger"}],"_id":"5546"},{"language":[{"iso":"eng"}],"place":"Weinheim","_id":"5547","date_updated":"2024-10-30T08:17:52Z","related_material":{"link":[{"url":"https://www.aiche.org/conferences/aiche-annual-meeting/2016/proceeding/paper/231ai-lemgo-d-and-z-value-database-food-instrument-dimensioning-pasteurization-process","relation":"confirmation"}]},"user_id":"83781","date_created":"2021-04-15T09:17:07Z","type":"conference","publication_identifier":{"isbn":["978-0-8169-1097-7"]},"publication":"Annual Meeting des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016","status":"public","publisher":"Wiley-VCH GmbH","department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"conference":{"location":"San Francisco","name":"Annual Meeting des American Institute of Chemical Engineers (AIChE)","end_date":"2016-11-18","start_date":"2016-11-13"},"year":"2016","author":[{"last_name":"Schwarzer","id":"13329","full_name":"Schwarzer, Knut","first_name":"Knut"},{"id":"12013","first_name":"Patrick","last_name":"Wilhelm","full_name":"Wilhelm, Patrick"},{"full_name":"Schneider, Jan","last_name":"Schneider","id":"13209","first_name":"Jan","orcid":"0000-0001-6401-8873"},{"full_name":"Müller, Ulrich","last_name":"Müller","first_name":"Ulrich","id":"12119"}],"publication_status":"published","citation":{"apa":"Schwarzer, K., Wilhelm, P., Schneider, J., & Müller, U. (2016). The Lemgo D- and z-value database for food – An instrument for the dimensioning of pasteurization process. Annual Meeting Des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016. Annual Meeting des American Institute of Chemical Engineers (AIChE), San Francisco.","chicago":"Schwarzer, Knut, Patrick Wilhelm, Jan Schneider, and Ulrich Müller. “The Lemgo D- and z-Value Database for Food – An Instrument for the Dimensioning of Pasteurization Process.” In Annual Meeting Des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016. Weinheim: Wiley-VCH GmbH, 2016.","van":"Schwarzer K, Wilhelm P, Schneider J, Müller U. The Lemgo D- and z-value database for food – An instrument for the dimensioning of pasteurization process. In: Annual Meeting des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13-18112016. Weinheim: Wiley-VCH GmbH; 2016.","ufg":"Schwarzer, Knut u. a.: The Lemgo D- and z-value database for food – An instrument for the dimensioning of pasteurization process, in: o. Hg.: Annual Meeting des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016, Weinheim 2016.","mla":"Schwarzer, Knut, et al. “The Lemgo D- and z-Value Database for Food – An Instrument for the Dimensioning of Pasteurization Process.” Annual Meeting Des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016, Wiley-VCH GmbH, 2016.","havard":"K. Schwarzer, P. Wilhelm, J. Schneider, U. Müller, The Lemgo D- and z-value database for food – An instrument for the dimensioning of pasteurization process, in: Annual Meeting Des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016, Wiley-VCH GmbH, Weinheim, 2016.","bjps":"Schwarzer K et al. (2016) The Lemgo D- and z-Value Database for Food – An Instrument for the Dimensioning of Pasteurization Process. Annual Meeting Des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016. Weinheim: Wiley-VCH GmbH.","short":"K. Schwarzer, P. Wilhelm, J. Schneider, U. Müller, in: Annual Meeting Des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016, Wiley-VCH GmbH, Weinheim, 2016.","chicago-de":"Schwarzer, Knut, Patrick Wilhelm, Jan Schneider und Ulrich Müller. 2016. The Lemgo D- and z-value database for food – An instrument for the dimensioning of pasteurization process. In: Annual Meeting des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016. Weinheim: Wiley-VCH GmbH.","din1505-2-1":"Schwarzer, Knut ; Wilhelm, Patrick ; Schneider, Jan ; Müller, Ulrich: The Lemgo D- and z-value database for food – An instrument for the dimensioning of pasteurization process. In: Annual Meeting des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016. Weinheim : Wiley-VCH GmbH, 2016","ieee":"K. Schwarzer, P. Wilhelm, J. Schneider, and U. Müller, “The Lemgo D- and z-value database for food – An instrument for the dimensioning of pasteurization process,” presented at the Annual Meeting des American Institute of Chemical Engineers (AIChE), San Francisco, 2016.","ama":"Schwarzer K, Wilhelm P, Schneider J, Müller U. The Lemgo D- and z-value database for food – An instrument for the dimensioning of pasteurization process. In: Annual Meeting Des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016. Wiley-VCH GmbH; 2016."},"title":"The Lemgo D- and z-value database for food – An instrument for the dimensioning of pasteurization process"},{"user_id":"15514","date_updated":"2023-03-15T13:50:00Z","publication":"Annual Meeting des American Institute of Chemical Engineers (AIChE), Vortrag, San Francisco, 13.-18.11.2016","type":"conference","date_created":"2021-04-15T09:17:07Z","language":[{"iso":"eng"}],"_id":"5548","citation":{"din1505-2-1":"Müller, Ulrich ; Wilhelm, Patrick: Mechanical steam treatment of plant material. In: Annual Meeting des American Institute of Chemical Engineers (AIChE), Vortrag, San Francisco, 13.-18.11.2016, 2016","chicago-de":"Müller, Ulrich und Patrick Wilhelm. 2016. Mechanical steam treatment of plant material. In: Annual Meeting des American Institute of Chemical Engineers (AIChE), Vortrag, San Francisco, 13.-18.11.2016.","short":"U. Müller, P. Wilhelm, in: Annual Meeting Des American Institute of Chemical Engineers (AIChE), Vortrag, San Francisco, 13.-18.11.2016, 2016.","chicago":"Müller, Ulrich, and Patrick Wilhelm. “Mechanical Steam Treatment of Plant Material.” In Annual Meeting Des American Institute of Chemical Engineers (AIChE), Vortrag, San Francisco, 13.-18.11.2016, 2016.","apa":"Müller, U., & Wilhelm, P. (2016). Mechanical steam treatment of plant material. In Annual Meeting des American Institute of Chemical Engineers (AIChE), Vortrag, San Francisco, 13.-18.11.2016. San Francisco.","havard":"U. Müller, P. Wilhelm, Mechanical steam treatment of plant material, in: Annual Meeting Des American Institute of Chemical Engineers (AIChE), Vortrag, San Francisco, 13.-18.11.2016, 2016.","mla":"Müller, Ulrich, and Patrick Wilhelm. “Mechanical Steam Treatment of Plant Material.” Annual Meeting Des American Institute of Chemical Engineers (AIChE), Vortrag, San Francisco, 13.-18.11.2016, 2016.","bjps":"Müller U and Wilhelm P (2016) Mechanical Steam Treatment of Plant Material. Annual Meeting Des American Institute of Chemical Engineers (AIChE), Vortrag, San Francisco, 13.-18.11.2016.","ufg":"Müller, Ulrich/Wilhelm, Patrick (2016): Mechanical steam treatment of plant material, in: Annual Meeting des American Institute of Chemical Engineers (AIChE), Vortrag, San Francisco, 13.-18.11.2016.","van":"Müller U, Wilhelm P. Mechanical steam treatment of plant material. In: Annual Meeting des American Institute of Chemical Engineers (AIChE), Vortrag, San Francisco, 13-18112016. 2016.","ieee":"U. Müller and P. Wilhelm, “Mechanical steam treatment of plant material,” in Annual Meeting des American Institute of Chemical Engineers (AIChE), Vortrag, San Francisco, 13.-18.11.2016, San Francisco, 2016.","ama":"Müller U, Wilhelm P. Mechanical steam treatment of plant material. In: Annual Meeting Des American Institute of Chemical Engineers (AIChE), Vortrag, San Francisco, 13.-18.11.2016. ; 2016."},"publication_status":"published","title":"Mechanical steam treatment of plant material","status":"public","author":[{"first_name":"Ulrich","last_name":"Müller","id":"12119","full_name":"Müller, Ulrich"},{"first_name":"Patrick","full_name":"Wilhelm, Patrick","id":"12013","last_name":"Wilhelm"}],"year":2016,"conference":{"name":"Annual Meeting des American Institute of Chemical Engineers (AIChE)","location":"San Francisco","start_date":"2016-11-13","end_date":"2016-11-18"},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}]},{"date_created":"2021-04-15T09:17:07Z","type":"conference","publication":"Annual Meeting des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016","date_updated":"2023-03-15T13:50:00Z","user_id":"15514","language":[{"iso":"eng"}],"_id":"5549","title":"A comparison of the static and dynamic freeze-drying by means of modelling","publication_status":"published","citation":{"ieee":"R. Pliske, U. Müller, and R. Kohlus, “A comparison of the static and dynamic freeze-drying by means of modelling,” in Annual Meeting des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016, San Francisco, 2016.","ama":"Pliske R, Müller U, Kohlus R. A comparison of the static and dynamic freeze-drying by means of modelling. In: Annual Meeting Des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016. ; 2016.","short":"R. Pliske, U. Müller, R. Kohlus, in: Annual Meeting Des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016, 2016.","chicago-de":"Pliske, Roland, Ulrich Müller und R. Kohlus. 2016. A comparison of the static and dynamic freeze-drying by means of modelling. In: Annual Meeting des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016.","din1505-2-1":"Pliske, Roland ; Müller, Ulrich ; Kohlus, R.: A comparison of the static and dynamic freeze-drying by means of modelling. In: Annual Meeting des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016, 2016","apa":"Pliske, R., Müller, U., & Kohlus, R. (2016). A comparison of the static and dynamic freeze-drying by means of modelling. In Annual Meeting des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016. San Francisco.","chicago":"Pliske, Roland, Ulrich Müller, and R. Kohlus. “A Comparison of the Static and Dynamic Freeze-Drying by Means of Modelling.” In Annual Meeting Des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016, 2016.","van":"Pliske R, Müller U, Kohlus R. A comparison of the static and dynamic freeze-drying by means of modelling. In: Annual Meeting des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13-18112016. 2016.","ufg":"Pliske, Roland et. al. (2016): A comparison of the static and dynamic freeze-drying by means of modelling, in: Annual Meeting des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016.","havard":"R. Pliske, U. Müller, R. Kohlus, A comparison of the static and dynamic freeze-drying by means of modelling, in: Annual Meeting Des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016, 2016.","mla":"Pliske, Roland, et al. “A Comparison of the Static and Dynamic Freeze-Drying by Means of Modelling.” Annual Meeting Des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016, 2016.","bjps":"Pliske R, Müller U and Kohlus R (2016) A Comparison of the Static and Dynamic Freeze-Drying by Means of Modelling. Annual Meeting Des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016."},"conference":{"location":"San Francisco","name":"Annual Meeting des American Institute of Chemical Engineers (AIChE)","end_date":"2016-11-18","start_date":"2016-11-13"},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"year":2016,"author":[{"full_name":"Pliske, Roland","last_name":"Pliske","id":"12864","first_name":"Roland"},{"full_name":"Müller, Ulrich","id":"12119","last_name":"Müller","first_name":"Ulrich"},{"first_name":"R.","full_name":"Kohlus, R.","last_name":"Kohlus"}],"status":"public"},{"date_updated":"2023-03-15T13:50:00Z","user_id":"15514","date_created":"2021-04-15T09:17:07Z","type":"conference","publication":"Annual Meeting des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016","language":[{"iso":"eng"}],"_id":"5550","publication_status":"published","citation":{"van":"Rossmann S, Schneider J, Müller U, Kohlus R. Direct homogenization of beverage emulsions with the innovative counterflow injection process. In: Annual Meeting des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13-18112016. 2016.","ama":"Rossmann S, Schneider J, Müller U, Kohlus R. Direct homogenization of beverage emulsions with the innovative counterflow injection process. In: Annual Meeting Des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016. ; 2016.","ufg":"Rossmann, Sören et. al. (2016): Direct homogenization of beverage emulsions with the innovative counterflow injection process, in: Annual Meeting des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016.","mla":"Rossmann, Sören, et al. “Direct Homogenization of Beverage Emulsions with the Innovative Counterflow Injection Process.” Annual Meeting Des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016, 2016.","havard":"S. Rossmann, J. Schneider, U. Müller, R. Kohlus, Direct homogenization of beverage emulsions with the innovative counterflow injection process, in: Annual Meeting Des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016, 2016.","bjps":"Rossmann S et al. (2016) Direct Homogenization of Beverage Emulsions with the Innovative Counterflow Injection Process. Annual Meeting Des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016.","apa":"Rossmann, S., Schneider, J., Müller, U., & Kohlus, R. (2016). Direct homogenization of beverage emulsions with the innovative counterflow injection process. In Annual Meeting des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016. San Francisco.","ieee":"S. Rossmann, J. Schneider, U. Müller, and R. Kohlus, “Direct homogenization of beverage emulsions with the innovative counterflow injection process,” in Annual Meeting des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016, San Francisco, 2016.","chicago":"Rossmann, Sören, Jan Schneider, Ulrich Müller, and R. Kohlus. “Direct Homogenization of Beverage Emulsions with the Innovative Counterflow Injection Process.” In Annual Meeting Des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016, 2016.","short":"S. Rossmann, J. Schneider, U. Müller, R. Kohlus, in: Annual Meeting Des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016, 2016.","din1505-2-1":"Rossmann, Sören ; Schneider, Jan ; Müller, Ulrich ; Kohlus, R.: Direct homogenization of beverage emulsions with the innovative counterflow injection process. In: Annual Meeting des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016, 2016","chicago-de":"Rossmann, Sören, Jan Schneider, Ulrich Müller und R. Kohlus. 2016. Direct homogenization of beverage emulsions with the innovative counterflow injection process. In: Annual Meeting des American Institute of Chemical Engineers (AIChE), Posterbeitrag, San Francisco, 13.-18.11.2016."},"title":"Direct homogenization of beverage emulsions with the innovative counterflow injection process","status":"public","department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"conference":{"end_date":"2016-11-18","start_date":"2016-11-13","name":"Annual Meeting des American Institute of Chemical Engineers (AIChE)","location":"San Francisco"},"author":[{"last_name":"Rossmann","id":"61416","first_name":"Sören","full_name":"Rossmann, Sören"},{"id":"13209","last_name":"Schneider","full_name":"Schneider, Jan","first_name":"Jan"},{"full_name":"Müller, Ulrich","first_name":"Ulrich","id":"12119","last_name":"Müller"},{"first_name":"R.","last_name":"Kohlus","full_name":"Kohlus, R."}],"year":2016},{"date_updated":"2024-05-22T09:58:26Z","user_id":"83779","date_created":"2021-04-15T09:24:41Z","type":"conference","publication":"DLG-Forum FoodTec, Frankfurt-Rodgau, 23.11.2016","_id":"5551","language":[{"iso":"ger"}],"publication_status":"published","citation":{"chicago":"Huchtmann, Julian, M. Aufzug, and Jan Schneider. “Entwicklung eines funktionellen Getränks zur Linderung des Hangover „Glory Mornin“.” In DLG-Forum FoodTec, Frankfurt-Rodgau, 23.11.2016, 2016.","apa":"Huchtmann, J., Aufzug, M., & Schneider, J. (2016). Entwicklung eines funktionellen Getränks zur Linderung des Hangover „Glory Mornin“. DLG-Forum FoodTec, Frankfurt-Rodgau, 23.11.2016. DLG-Forum FoodTec, Frankfurt-Rodgau.","ieee":"J. Huchtmann, M. Aufzug, and J. Schneider, “Entwicklung eines funktionellen Getränks zur Linderung des Hangover „Glory Mornin“,” presented at the DLG-Forum FoodTec, Frankfurt-Rodgau, 2016.","ufg":"Huchtmann, Julian/Aufzug, M./Schneider, Jan: Entwicklung eines funktionellen Getränks zur Linderung des Hangover „Glory Mornin“, in: o. Hg.: DLG-Forum FoodTec, Frankfurt-Rodgau, 23.11.2016, o. O. 2016.","havard":"J. Huchtmann, M. Aufzug, J. Schneider, Entwicklung eines funktionellen Getränks zur Linderung des Hangover „Glory Mornin“, in: DLG-Forum FoodTec, Frankfurt-Rodgau, 23.11.2016, 2016.","bjps":"Huchtmann J, Aufzug M and Schneider J (2016) Entwicklung eines funktionellen Getränks zur Linderung des Hangover „Glory Mornin“. DLG-Forum FoodTec, Frankfurt-Rodgau, 23.11.2016.","mla":"Huchtmann, Julian, et al. “Entwicklung eines funktionellen Getränks zur Linderung des Hangover „Glory Mornin“.” DLG-Forum FoodTec, Frankfurt-Rodgau, 23.11.2016, 2016.","van":"Huchtmann J, Aufzug M, Schneider J. Entwicklung eines funktionellen Getränks zur Linderung des Hangover „Glory Mornin“. In: DLG-Forum FoodTec, Frankfurt-Rodgau, 23112016. 2016.","ama":"Huchtmann J, Aufzug M, Schneider J. Entwicklung eines funktionellen Getränks zur Linderung des Hangover „Glory Mornin“. In: DLG-Forum FoodTec, Frankfurt-Rodgau, 23.11.2016. ; 2016.","chicago-de":"Huchtmann, Julian, M. Aufzug und Jan Schneider. 2016. Entwicklung eines funktionellen Getränks zur Linderung des Hangover „Glory Mornin“. In: DLG-Forum FoodTec, Frankfurt-Rodgau, 23.11.2016.","din1505-2-1":"Huchtmann, Julian ; Aufzug, M. ; Schneider, Jan: Entwicklung eines funktionellen Getränks zur Linderung des Hangover „Glory Mornin“. In: DLG-Forum FoodTec, Frankfurt-Rodgau, 23.11.2016, 2016","short":"J. Huchtmann, M. Aufzug, J. Schneider, in: DLG-Forum FoodTec, Frankfurt-Rodgau, 23.11.2016, 2016."},"title":"Entwicklung eines funktionellen Getränks zur Linderung des Hangover „Glory Mornin“","status":"public","conference":{"start_date":"2016-11-23","name":"DLG-Forum FoodTec","location":"Frankfurt-Rodgau"},"department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"year":"2016","author":[{"last_name":"Huchtmann","first_name":"Julian","id":"58715","full_name":"Huchtmann, Julian"},{"first_name":"M.","full_name":"Aufzug, M.","last_name":"Aufzug"},{"orcid":"0000-0001-6401-8873","last_name":"Schneider","first_name":"Jan","id":"13209","full_name":"Schneider, Jan"}]},{"title":"Biokatalytische Methanisierung im Pilotmaßstab ","publication_status":"published","citation":{"chicago-de":"Broeker, Timo, D. Blöhse, J. Bittner, Marc Hoffarth, Hans-Günter Ramke, Klaus Heikrodt und Jan Schneider. 2016. Biokatalytische Methanisierung im Pilotmaßstab . In: NRW-Biokraftstofftagung - Haus Düsse - Landwirtschaftskammer NRW, Bad Sassendorf, 24.11.2016.","din1505-2-1":"Broeker, Timo ; Blöhse, D. ; Bittner, J. ; Hoffarth, Marc ; Ramke, Hans-Günter ; Heikrodt, Klaus ; Schneider, Jan: Biokatalytische Methanisierung im Pilotmaßstab . In: NRW-Biokraftstofftagung - Haus Düsse - Landwirtschaftskammer NRW, Bad Sassendorf, 24.11.2016, 2016","short":"T. Broeker, D. Blöhse, J. Bittner, M. Hoffarth, H.-G. Ramke, K. Heikrodt, J. Schneider, in: NRW-Biokraftstofftagung - Haus Düsse - Landwirtschaftskammer NRW, Bad Sassendorf, 24.11.2016, 2016.","chicago":"Broeker, Timo, D. Blöhse, J. Bittner, Marc Hoffarth, Hans-Günter Ramke, Klaus Heikrodt, and Jan Schneider. “Biokatalytische Methanisierung im Pilotmaßstab .” In NRW-Biokraftstofftagung - Haus Düsse - Landwirtschaftskammer NRW, Bad Sassendorf, 24.11.2016, 2016.","apa":"Broeker, T., Blöhse, D., Bittner, J., Hoffarth, M., Ramke, H.-G., Heikrodt, K., & Schneider, J. (2016). Biokatalytische Methanisierung im Pilotmaßstab . NRW-Biokraftstofftagung - Haus Düsse - Landwirtschaftskammer NRW, Bad Sassendorf, 24.11.2016. NRW-Biokraftstofftagung - Haus Düsse - Landwirtschaftskammer NRW, Bad Sassendorf.","ieee":"T. Broeker et al., “Biokatalytische Methanisierung im Pilotmaßstab ,” presented at the NRW-Biokraftstofftagung - Haus Düsse - Landwirtschaftskammer NRW, Bad Sassendorf, 2016.","ufg":"Broeker, Timo u. a.: Biokatalytische Methanisierung im Pilotmaßstab , in: o. Hg.: NRW-Biokraftstofftagung - Haus Düsse - Landwirtschaftskammer NRW, Bad Sassendorf, 24.11.2016, o. O. 2016.","havard":"T. Broeker, D. Blöhse, J. Bittner, M. Hoffarth, H.-G. Ramke, K. Heikrodt, J. Schneider, Biokatalytische Methanisierung im Pilotmaßstab , in: NRW-Biokraftstofftagung - Haus Düsse - Landwirtschaftskammer NRW, Bad Sassendorf, 24.11.2016, 2016.","mla":"Broeker, Timo, et al. “Biokatalytische Methanisierung im Pilotmaßstab .” NRW-Biokraftstofftagung - Haus Düsse - Landwirtschaftskammer NRW, Bad Sassendorf, 24.11.2016, 2016.","bjps":"Broeker T et al. (2016) Biokatalytische Methanisierung im Pilotmaßstab . NRW-Biokraftstofftagung - Haus Düsse - Landwirtschaftskammer NRW, Bad Sassendorf, 24.11.2016.","van":"Broeker T, Blöhse D, Bittner J, Hoffarth M, Ramke HG, Heikrodt K, et al. Biokatalytische Methanisierung im Pilotmaßstab . In: NRW-Biokraftstofftagung - Haus Düsse - Landwirtschaftskammer NRW, Bad Sassendorf, 24112016. 2016.","ama":"Broeker T, Blöhse D, Bittner J, et al. Biokatalytische Methanisierung im Pilotmaßstab . In: NRW-Biokraftstofftagung - Haus Düsse - Landwirtschaftskammer NRW, Bad Sassendorf, 24.11.2016. ; 2016."},"department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"conference":{"start_date":"2016-11-24","location":"Bad Sassendorf","name":"NRW-Biokraftstofftagung - Haus Düsse - Landwirtschaftskammer NRW"},"author":[{"full_name":"Broeker, Timo","first_name":"Timo","id":"43927","last_name":"Broeker"},{"first_name":"D.","full_name":"Blöhse, D.","last_name":"Blöhse"},{"full_name":"Bittner, J.","first_name":"J.","last_name":"Bittner"},{"first_name":"Marc","last_name":"Hoffarth","id":"52330","full_name":"Hoffarth, Marc"},{"id":"21006","first_name":"Hans-Günter","full_name":"Ramke, Hans-Günter","last_name":"Ramke"},{"full_name":"Heikrodt, Klaus","first_name":"Klaus","id":"46269","last_name":"Heikrodt"},{"first_name":"Jan","full_name":"Schneider, Jan","id":"13209","last_name":"Schneider","orcid":"0000-0001-6401-8873"}],"year":"2016","status":"public","date_created":"2021-04-15T09:27:49Z","type":"conference","publication":"NRW-Biokraftstofftagung - Haus Düsse - Landwirtschaftskammer NRW, Bad Sassendorf, 24.11.2016","date_updated":"2024-05-22T09:58:59Z","user_id":"83779","language":[{"iso":"ger"}],"_id":"5552"},{"conference":{"start_date":"2016-12-12","name":"Lebensmittel 4.0","location":"Lemgo"},"department":[{"_id":"DEP4023"},{"_id":"DEP1308"},{"_id":"DEP4018"}],"year":"2016","author":[{"first_name":"Jan","last_name":"Schneider","id":"13209","full_name":"Schneider, Jan","orcid":"0000-0001-6401-8873"}],"status":"public","title":"Potenziale von Industrie 4.0 in der Qualitätssteuerung","publication_status":"published","citation":{"short":"J. Schneider, in: Lebensmittel 4.0, Vortrag, Lemgo, 12.12.2016, 2016.","din1505-2-1":"Schneider, Jan: Potenziale von Industrie 4.0 in der Qualitätssteuerung. In: Lebensmittel 4.0, Vortrag, Lemgo, 12.12.2016, 2016","chicago-de":"Schneider, Jan. 2016. Potenziale von Industrie 4.0 in der Qualitätssteuerung. In: Lebensmittel 4.0, Vortrag, Lemgo, 12.12.2016.","apa":"Schneider, J. (2016). Potenziale von Industrie 4.0 in der Qualitätssteuerung. Lebensmittel 4.0, Vortrag, Lemgo, 12.12.2016. Lebensmittel 4.0, Lemgo.","chicago":"Schneider, Jan. “Potenziale von Industrie 4.0 in der Qualitätssteuerung.” In Lebensmittel 4.0, Vortrag, Lemgo, 12.12.2016, 2016.","van":"Schneider J. Potenziale von Industrie 4.0 in der Qualitätssteuerung. In: Lebensmittel 40, Vortrag, Lemgo, 12122016. 2016.","ufg":"Schneider, Jan: Potenziale von Industrie 4.0 in der Qualitätssteuerung, in: o. Hg.: Lebensmittel 4.0, Vortrag, Lemgo, 12.12.2016, o. O. 2016.","havard":"J. Schneider, Potenziale von Industrie 4.0 in der Qualitätssteuerung, in: Lebensmittel 4.0, Vortrag, Lemgo, 12.12.2016, 2016.","bjps":"Schneider J (2016) Potenziale von Industrie 4.0 in der Qualitätssteuerung. Lebensmittel 4.0, Vortrag, Lemgo, 12.12.2016.","mla":"Schneider, Jan. “Potenziale von Industrie 4.0 in der Qualitätssteuerung.” Lebensmittel 4.0, Vortrag, Lemgo, 12.12.2016, 2016.","ieee":"J. Schneider, “Potenziale von Industrie 4.0 in der Qualitätssteuerung,” presented at the Lebensmittel 4.0, Lemgo, 2016.","ama":"Schneider J. Potenziale von Industrie 4.0 in der Qualitätssteuerung. In: Lebensmittel 4.0, Vortrag, Lemgo, 12.12.2016. ; 2016."},"_id":"5553","language":[{"iso":"ger"}],"type":"conference","date_created":"2021-04-15T09:29:33Z","publication":"Lebensmittel 4.0, Vortrag, Lemgo, 12.12.2016","date_updated":"2024-05-22T09:59:42Z","user_id":"83779"},{"issue":"8","year":2016,"author":[{"first_name":"Roland","last_name":"Pliske","id":"12864","full_name":"Pliske, Roland"},{"last_name":"Haase","full_name":"Haase, M.","first_name":"M."},{"full_name":"Müller, Ulrich","first_name":"Ulrich","last_name":"Müller","id":"12119"},{"last_name":"Kohlus","full_name":"Kohlus, R.","first_name":"R."}],"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"publisher":"Wiley-VCH","status":"public","page":"1169-1176","title":"Prozesscharakterisierung der dynamischen Gefriertrocknung in einem Feststoffmischer ","volume":88,"citation":{"din1505-2-1":"Pliske, Roland ; Haase, M. ; Müller, Ulrich ; Kohlus, R.: Prozesscharakterisierung der dynamischen Gefriertrocknung in einem Feststoffmischer . In: Chemie-Ingenieur-Technik Bd. 88. Weinheim, Wiley-VCH (2016), Nr. 8, S. 1169–1176","chicago-de":"Pliske, Roland, M. Haase, Ulrich Müller und R. Kohlus. 2016. Prozesscharakterisierung der dynamischen Gefriertrocknung in einem Feststoffmischer . Chemie-Ingenieur-Technik 88, Nr. 8: 1169–1176.","short":"R. Pliske, M. Haase, U. Müller, R. Kohlus, Chemie-Ingenieur-Technik 88 (2016) 1169–1176.","chicago":"Pliske, Roland, M. Haase, Ulrich Müller, and R. Kohlus. “Prozesscharakterisierung der dynamischen Gefriertrocknung in einem Feststoffmischer .” Chemie-Ingenieur-Technik 88, no. 8 (2016): 1169–76.","apa":"Pliske, R., Haase, M., Müller, U., & Kohlus, R. (2016). Prozesscharakterisierung der dynamischen Gefriertrocknung in einem Feststoffmischer . Chemie-Ingenieur-Technik , 88(8), 1169–1176.","ufg":"Pliske, Roland et. al. (2016): Prozesscharakterisierung der dynamischen Gefriertrocknung in einem Feststoffmischer , in: Chemie-Ingenieur-Technik 88 (8), S. 1169–1176.","bjps":"Pliske R et al. (2016) Prozesscharakterisierung der dynamischen Gefriertrocknung in einem Feststoffmischer . Chemie-Ingenieur-Technik 88, 1169–1176.","mla":"Pliske, Roland, et al. “Prozesscharakterisierung der dynamischen Gefriertrocknung in einem Feststoffmischer .” Chemie-Ingenieur-Technik , vol. 88, no. 8, Wiley-VCH, 2016, pp. 1169–76.","havard":"R. Pliske, M. Haase, U. Müller, R. Kohlus, Prozesscharakterisierung der dynamischen Gefriertrocknung in einem Feststoffmischer , Chemie-Ingenieur-Technik . 88 (2016) 1169–1176.","van":"Pliske R, Haase M, Müller U, Kohlus R. Prozesscharakterisierung der dynamischen Gefriertrocknung in einem Feststoffmischer . Chemie-Ingenieur-Technik . 2016;88(8):1169–76.","ieee":"R. Pliske, M. Haase, U. Müller, and R. Kohlus, “Prozesscharakterisierung der dynamischen Gefriertrocknung in einem Feststoffmischer ,” Chemie-Ingenieur-Technik , vol. 88, no. 8, pp. 1169–1176, 2016.","ama":"Pliske R, Haase M, Müller U, Kohlus R. Prozesscharakterisierung der dynamischen Gefriertrocknung in einem Feststoffmischer . Chemie-Ingenieur-Technik . 2016;88(8):1169-1176."},"publication_status":"published","_id":"5554","place":"Weinheim","language":[{"iso":"ger"}],"publication":"Chemie-Ingenieur-Technik ","publication_identifier":{"issn":["0009-286X "]},"date_created":"2021-04-15T09:33:28Z","type":"journal_article","intvolume":" 88","user_id":"15514","date_updated":"2023-03-15T13:50:00Z"},{"file_date_updated":"2021-04-30T15:01:49Z","date_updated":"2023-03-15T13:50:01Z","date_created":"2021-04-30T12:41:59Z","publication_identifier":{"issn":["2566-8900"]},"publication":"urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung","language":[{"iso":"ger"}],"oa":"1","citation":{"mla":"Cardinali, Marcel. “Integrationsprozesse brauchen geeignete Räume. Handlungsempfehlungen für Flüchtlingsunterkünfte.” urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 1, Technische Hochschule Ostwestfalen-Lippe, 2016, pp. 24–26.","havard":"M. Cardinali, Integrationsprozesse brauchen geeignete Räume. Handlungsempfehlungen für Flüchtlingsunterkünfte, urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. (2016) 24–26.","bjps":"Cardinali M (2016) Integrationsprozesse brauchen geeignete Räume. Handlungsempfehlungen für Flüchtlingsunterkünfte. urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung 24–26.","ufg":"Cardinali, Marcel (2016): Integrationsprozesse brauchen geeignete Räume. Handlungsempfehlungen für Flüchtlingsunterkünfte, in: urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung (1), S. 24–26.","van":"Cardinali M. Integrationsprozesse brauchen geeignete Räume. Handlungsempfehlungen für Flüchtlingsunterkünfte. urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. 2016;(1):24–6.","chicago":"Cardinali, Marcel. “Integrationsprozesse brauchen geeignete Räume. Handlungsempfehlungen für Flüchtlingsunterkünfte.” urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 1 (2016): 24–26.","apa":"Cardinali, M. (2016). Integrationsprozesse brauchen geeignete Räume. Handlungsempfehlungen für Flüchtlingsunterkünfte. urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, (1), 24–26.","din1505-2-1":"Cardinali, Marcel: Integrationsprozesse brauchen geeignete Räume. Handlungsempfehlungen für Flüchtlingsunterkünfte. In: urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. Detmold, Technische Hochschule Ostwestfalen-Lippe (2016), Nr. 1, S. 24–26","chicago-de":"Cardinali, Marcel. 2016. Integrationsprozesse brauchen geeignete Räume. Handlungsempfehlungen für Flüchtlingsunterkünfte. urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, Nr. 1: 24–26.","short":"M. Cardinali, urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung (2016) 24–26.","ama":"Cardinali M. Integrationsprozesse brauchen geeignete Räume. Handlungsempfehlungen für Flüchtlingsunterkünfte. urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung. 2016;(1):24-26.","ieee":"M. Cardinali, “Integrationsprozesse brauchen geeignete Räume. Handlungsempfehlungen für Flüchtlingsunterkünfte,” urbanLab Magazin - Fachzeitschrift für Stadt- und Quartiersplanung, no. 1, pp. 24–26, 2016."},"title":"Integrationsprozesse brauchen geeignete Räume. Handlungsempfehlungen für Flüchtlingsunterkünfte","page":"24-26","status":"public","author":[{"orcid":"0000-0002-8841-9345","last_name":"Cardinali","first_name":"Marcel","full_name":"Cardinali, Marcel","id":"58462"}],"year":2016,"main_file_link":[{"open_access":"1","url":"https://www.yumpu.com/de/document/read/63562669/urbanlab-magazin-2016-schrumpfen-wir-noch-oder-wachsen-wir-schon"}],"user_id":"45673","type":"journal_article","_id":"5744","place":"Detmold","has_accepted_license":"1","file":[{"success":1,"access_level":"open_access","date_updated":"2021-04-30T15:01:49Z","creator":"edu-dd0","relation":"main_file","date_created":"2021-04-30T15:01:49Z","file_name":"Integrationsprozesse brauchen geeignete Räume .pdf","content_type":"application/pdf","file_size":770533,"file_id":"5753"}],"publication_status":"published","publisher":"Technische Hochschule Ostwestfalen-Lippe","issue":"1","department":[{"_id":"DEP1303"},{"_id":"DEP1055"}],"ddc":["050"]},{"user_id":"83781","intvolume":" 69","type":"book_chapter","place":"Berlin","_id":"5761","publication_status":"published","series_title":"Leibniz-Institut für Ökologische Raumentwicklung: IÖR-Schriften ","quality_controlled":"1","publisher":"Rhombos-Verlag ","department":[{"_id":"DEP1055"},{"_id":"DEP1025"},{"_id":"DEP1028"}],"date_updated":"2024-12-04T13:09:52Z","editor":[{"last_name":"Meinel","first_name":"Gotthard ","full_name":"Meinel, Gotthard "}],"corporate_editor":["Leibniz Institut für Raumentwicklung"],"date_created":"2021-04-30T18:08:50Z","publication_identifier":{"isbn":["978-3-944101-69-9"]},"publication":"Flächensparen - Ökosystemleistungen - Handlungsstrategien","language":[{"iso":"ger"}],"volume":69,"citation":{"short":"K. Greve, A. Häusler, in: G. Meinel, Leibniz Institut für Raumentwicklung (Eds.), Flächensparen - Ökosystemleistungen - Handlungsstrategien, Rhombos-Verlag , Berlin, 2016, pp. 59–66.","din1505-2-1":"Greve, Klaus ; Häusler, Axel: Entwicklung und Einsatz von ISI - ein GIS-Webdienst zur ressourcenschonenden Flächenplanung. In: Meinel, G. ; Leibniz Institut für Raumentwicklung (Hrsg.): Flächensparen - Ökosystemleistungen - Handlungsstrategien, Leibniz-Institut für Ökologische Raumentwicklung: IÖR-Schriften . Bd. 69. Berlin : Rhombos-Verlag , 2016, S. 59–66","chicago-de":"Greve, Klaus und Axel Häusler. 2016. Entwicklung und Einsatz von ISI - ein GIS-Webdienst zur ressourcenschonenden Flächenplanung. In: Flächensparen - Ökosystemleistungen - Handlungsstrategien, hg. von Gotthard Meinel und Leibniz Institut für Raumentwicklung, 69:59–66. Leibniz-Institut für Ökologische Raumentwicklung: IÖR-Schriften . Berlin: Rhombos-Verlag .","ieee":"K. Greve and A. Häusler, “Entwicklung und Einsatz von ISI - ein GIS-Webdienst zur ressourcenschonenden Flächenplanung,” in Flächensparen - Ökosystemleistungen - Handlungsstrategien, vol. 69, G. Meinel and Leibniz Institut für Raumentwicklung, Eds. Berlin: Rhombos-Verlag , 2016, pp. 59–66.","apa":"Greve, K., & Häusler, A. (2016). Entwicklung und Einsatz von ISI - ein GIS-Webdienst zur ressourcenschonenden Flächenplanung. In G. Meinel & Leibniz Institut für Raumentwicklung (Eds.), Flächensparen - Ökosystemleistungen - Handlungsstrategien (Vol. 69, pp. 59–66). Rhombos-Verlag .","chicago":"Greve, Klaus, and Axel Häusler. “Entwicklung und Einsatz von ISI - ein GIS-Webdienst zur ressourcenschonenden Flächenplanung.” In Flächensparen - Ökosystemleistungen - Handlungsstrategien, edited by Gotthard Meinel and Leibniz Institut für Raumentwicklung, 69:59–66. Leibniz-Institut für Ökologische Raumentwicklung: IÖR-Schriften . Berlin: Rhombos-Verlag , 2016.","ama":"Greve K, Häusler A. Entwicklung und Einsatz von ISI - ein GIS-Webdienst zur ressourcenschonenden Flächenplanung. In: Meinel G, Leibniz Institut für Raumentwicklung, eds. Flächensparen - Ökosystemleistungen - Handlungsstrategien. Vol 69. Leibniz-Institut für Ökologische Raumentwicklung: IÖR-Schriften . Rhombos-Verlag ; 2016:59-66.","van":"Greve K, Häusler A. Entwicklung und Einsatz von ISI - ein GIS-Webdienst zur ressourcenschonenden Flächenplanung. In: Meinel G, Leibniz Institut für Raumentwicklung, editors. Flächensparen - Ökosystemleistungen - Handlungsstrategien. Berlin: Rhombos-Verlag ; 2016. p. 59–66. (Leibniz-Institut für Ökologische Raumentwicklung: IÖR-Schriften ; vol. 69).","bjps":"Greve K and Häusler A (2016) Entwicklung und Einsatz von ISI - ein GIS-Webdienst zur ressourcenschonenden Flächenplanung. In Meinel G and Leibniz Institut für Raumentwicklung (eds), Flächensparen - Ökosystemleistungen - Handlungsstrategien, vol. 69. Berlin: Rhombos-Verlag , pp. 59–66.","havard":"K. Greve, A. Häusler, Entwicklung und Einsatz von ISI - ein GIS-Webdienst zur ressourcenschonenden Flächenplanung, in: G. Meinel, Leibniz Institut für Raumentwicklung (Eds.), Flächensparen - Ökosystemleistungen - Handlungsstrategien, Rhombos-Verlag , Berlin, 2016: pp. 59–66.","mla":"Greve, Klaus, and Axel Häusler. “Entwicklung und Einsatz von ISI - ein GIS-Webdienst zur ressourcenschonenden Flächenplanung.” Flächensparen - Ökosystemleistungen - Handlungsstrategien, edited by Gotthard Meinel and Leibniz Institut für Raumentwicklung, vol. 69, Rhombos-Verlag , 2016, pp. 59–66.","ufg":"Greve, Klaus/Häusler, Axel: Entwicklung und Einsatz von ISI - ein GIS-Webdienst zur ressourcenschonenden Flächenplanung, in: Meinel, Gotthard, Leibniz Institut für Raumentwicklung (Hgg.): Flächensparen - Ökosystemleistungen - Handlungsstrategien, Bd. 69, Berlin 2016 (Leibniz-Institut für Ökologische Raumentwicklung: IÖR-Schriften ), S. 59–66."},"title":"Entwicklung und Einsatz von ISI - ein GIS-Webdienst zur ressourcenschonenden Flächenplanung","page":"59-66","status":"public","author":[{"first_name":"Klaus","last_name":"Greve","full_name":"Greve, Klaus"},{"full_name":"Häusler, Axel","last_name":"Häusler","id":"61520","first_name":"Axel","orcid":"0009-0001-8565-8199"}],"year":"2016"},{"conference":{"end_date":"2016-09-23","start_date":"2016-09-20","name":"GLASSTEC-Baumesse","location":"Düsseldorf"},"department":[{"_id":"DEP1055"},{"_id":"DEP1025"},{"_id":"DEP1028"}],"author":[{"last_name":"Häusler","full_name":"Häusler, Axel","id":"61520","first_name":"Axel","orcid":"0009-0001-8565-8199"}],"year":"2016","status":"public","title":"GeoDesign","publication_status":"published","citation":{"ama":"Häusler A. GeoDesign. In: Glasstec 2016: „Düsseldorf Ist Die Metropole Moderner Glas-Architektur“. ; 2016.","ieee":"A. Häusler, “GeoDesign,” presented at the GLASSTEC-Baumesse, Düsseldorf, 2016.","chicago-de":"Häusler, Axel. 2016. GeoDesign. In: glasstec 2016: „Düsseldorf ist die Metropole moderner Glas-Architektur“.","din1505-2-1":"Häusler, Axel: GeoDesign. In: glasstec 2016: „Düsseldorf ist die Metropole moderner Glas-Architektur“, 2016","short":"A. Häusler, in: Glasstec 2016: „Düsseldorf Ist Die Metropole Moderner Glas-Architektur“, 2016.","ufg":"Häusler, Axel: GeoDesign, in: o. Hg.: glasstec 2016: „Düsseldorf ist die Metropole moderner Glas-Architektur“, o. O. 2016.","bjps":"Häusler A (2016) GeoDesign. Glasstec 2016: „Düsseldorf Ist Die Metropole Moderner Glas-Architektur“.","mla":"Häusler, Axel. “GeoDesign.” Glasstec 2016: „Düsseldorf Ist Die Metropole Moderner Glas-Architektur“, 2016.","havard":"A. Häusler, GeoDesign, in: Glasstec 2016: „Düsseldorf Ist Die Metropole Moderner Glas-Architektur“, 2016.","van":"Häusler A. GeoDesign. In: glasstec 2016: „Düsseldorf ist die Metropole moderner Glas-Architektur“. 2016.","chicago":"Häusler, Axel. “GeoDesign.” In Glasstec 2016: „Düsseldorf Ist Die Metropole Moderner Glas-Architektur“, 2016.","apa":"Häusler, A. (2016). GeoDesign. Glasstec 2016: „Düsseldorf Ist Die Metropole Moderner Glas-Architektur“. GLASSTEC-Baumesse, Düsseldorf."},"_id":"5768","language":[{"iso":"eng"}],"type":"conference_abstract","date_created":"2021-05-02T11:33:49Z","publication":"glasstec 2016: „Düsseldorf ist die Metropole moderner Glas-Architektur“","date_updated":"2024-12-04T13:10:33Z","user_id":"83781"},{"title":"Low and mid frequency design - Implementation of room acoustics in different building types and for different kinds of use","citation":{"havard":"C. Kirch, U. Pottgiesser, Low and mid frequency design - Implementation of room acoustics in different building types and for different kinds of use, in: W. Kropp (Ed.), Proceedings of the Inter-Noise 2016, Deutsche Gesellschaft für Akustik e.V., Berlin, 2016.","bjps":"Kirch C and Pottgiesser U (2016) Low and Mid Frequency Design - Implementation of Room Acoustics in Different Building Types and for Different Kinds of Use. In Kropp W (ed.), Proceedings of the Inter-Noise 2016. Berlin: Deutsche Gesellschaft für Akustik e.V.","mla":"Kirch, Chirstoph, and Uta Pottgiesser. “Low and Mid Frequency Design - Implementation of Room Acoustics in Different Building Types and for Different Kinds of Use.” Proceedings of the Inter-Noise 2016, edited by W. Kropp, Deutsche Gesellschaft für Akustik e.V., 2016.","ufg":"Kirch, Chirstoph/Pottgiesser, Uta (2016): Low and mid frequency design - Implementation of room acoustics in different building types and for different kinds of use, in: W. Kropp (Hg.): Proceedings of the Inter-Noise 2016, Berlin.","van":"Kirch C, Pottgiesser U. Low and mid frequency design - Implementation of room acoustics in different building types and for different kinds of use. In: Kropp W, editor. Proceedings of the Inter-Noise 2016. Berlin: Deutsche Gesellschaft für Akustik e.V.; 2016.","chicago":"Kirch, Chirstoph, and Uta Pottgiesser. “Low and Mid Frequency Design - Implementation of Room Acoustics in Different Building Types and for Different Kinds of Use.” In Proceedings of the Inter-Noise 2016, edited by W. Kropp. Berlin: Deutsche Gesellschaft für Akustik e.V., 2016.","apa":"Kirch, C., & Pottgiesser, U. (2016). Low and mid frequency design - Implementation of room acoustics in different building types and for different kinds of use. In W. Kropp (Ed.), Proceedings of the Inter-Noise 2016. Berlin: Deutsche Gesellschaft für Akustik e.V.","chicago-de":"Kirch, Chirstoph und Uta Pottgiesser. 2016. Low and mid frequency design - Implementation of room acoustics in different building types and for different kinds of use. In: Proceedings of the Inter-Noise 2016, hg. von W. Kropp. Berlin: Deutsche Gesellschaft für Akustik e.V.","din1505-2-1":"Kirch, Chirstoph ; Pottgiesser, Uta: Low and mid frequency design - Implementation of room acoustics in different building types and for different kinds of use. In: Kropp, W. (Hrsg.): Proceedings of the Inter-Noise 2016. Berlin : Deutsche Gesellschaft für Akustik e.V., 2016","short":"C. Kirch, U. Pottgiesser, in: W. Kropp (Ed.), Proceedings of the Inter-Noise 2016, Deutsche Gesellschaft für Akustik e.V., Berlin, 2016.","ama":"Kirch C, Pottgiesser U. Low and mid frequency design - Implementation of room acoustics in different building types and for different kinds of use. In: Kropp W, ed. Proceedings of the Inter-Noise 2016. Berlin: Deutsche Gesellschaft für Akustik e.V.; 2016.","ieee":"C. Kirch and U. Pottgiesser, “Low and mid frequency design - Implementation of room acoustics in different building types and for different kinds of use,” in Proceedings of the Inter-Noise 2016, Hamburg, 2016."},"publication_status":"published","abstract":[{"text":"In offices and most other working environments a high speech privacy and a low noise level is desired to allow for concentrated work and calm work conditions. Hence a low Speech Transmission Index (STI) is required, as even irrelevant speech information at lower volumes can be extremly disturbing and performance reducing. At the same time working environments demand for other - often conflicting - requirements such as transparency to ensure visual connections and daylight transmission, functional flexibility for diverse activities in the same space and for hygienic, environmental or security aspects. These requirements have to be balanced by a sensible and intelligent design and layout of absorbers and partition elements and partition. Three research projects investigated an optimised design of low and mid frequency absorbers for working environments to improve the acoustic and design quality of different products. Acoustically optimised indoor spaces may become more important in the future due to an increase of hearing impairments in the aging population as well as in the younger generations. This is seen not only as a technical but as a design challenge to balance optimised sound pressure levels, reverberation times and Speech Transmission Indices. © 2016, German Acoustical Society (DEGA). All rights reserved.","lang":"eng"}],"year":2016,"author":[{"last_name":"Kirch","full_name":"Kirch, Chirstoph","first_name":"Chirstoph"},{"full_name":"Pottgiesser, Uta","first_name":"Uta","last_name":"Pottgiesser","id":"27166","orcid":"0000-0002-8594-3168"}],"department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"conference":{"name":"45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future","location":"Hamburg","end_date":"2016-08-24","start_date":"2016-08-21"},"publisher":"Deutsche Gesellschaft für Akustik e.V.","quality_controlled":"1","status":"public","publication":"Proceedings of the Inter-Noise 2016","date_created":"2021-03-03T14:23:05Z","type":"conference","editor":[{"full_name":"Kropp, W.","first_name":"W.","last_name":"Kropp"}],"user_id":"45673","date_updated":"2023-03-15T13:50:02Z","_id":"5810","keyword":["Additional requirements","Building types","Room acoustics"],"place":"Berlin","language":[{"iso":"eng"}]},{"corporate_editor":["EZUS - Europäisches Zentrum für universitäre Studien"],"user_id":"83781","date_updated":"2024-12-04T13:11:15Z","date_created":"2021-05-12T12:20:11Z","type":"conference","_id":"5875","language":[{"iso":"ger"}],"citation":{"ieee":"A. Häusler, “Kann man aus Daten Städte bauen?,” Bad Meinberg, 2016.","ama":"Häusler A. Kann man aus Daten Städte bauen? In: EZUS - Europäisches Zentrum für universitäre Studien, ed. ; 2016.","chicago-de":"Häusler, Axel. 2016. Kann man aus Daten Städte bauen? In: , hg. von EZUS - Europäisches Zentrum für universitäre Studien.","din1505-2-1":"Häusler, Axel: Kann man aus Daten Städte bauen? In: EZUS - Europäisches Zentrum für universitäre Studien (Hrsg.): , 2016","short":"A. Häusler, in: EZUS - Europäisches Zentrum für universitäre Studien (Ed.), 2016.","chicago":"Häusler, Axel. “Kann man aus Daten Städte bauen?” edited by EZUS - Europäisches Zentrum für universitäre Studien, 2016.","apa":"Häusler, A. (2016). Kann man aus Daten Städte bauen? (EZUS - Europäisches Zentrum für universitäre Studien, Ed.).","mla":"Häusler, Axel. Kann man aus Daten Städte bauen? Edited by EZUS - Europäisches Zentrum für universitäre Studien, 2016.","bjps":"Häusler A (2016) Kann man aus Daten Städte bauen? In EZUS - Europäisches Zentrum für universitäre Studien (ed.).","havard":"A. Häusler, Kann man aus Daten Städte bauen?, in: EZUS - Europäisches Zentrum für universitäre Studien (Ed.), 2016.","ufg":"Häusler, Axel: Kann man aus Daten Städte bauen?, in: EZUS - Europäisches Zentrum für universitäre Studien (Hg.): o. O. 2016.","van":"Häusler A. Kann man aus Daten Städte bauen? In: EZUS - Europäisches Zentrum für universitäre Studien, editor. 2016."},"publication_status":"published","title":"Kann man aus Daten Städte bauen?","status":"public","author":[{"last_name":"Häusler","full_name":"Häusler, Axel","id":"61520","first_name":"Axel","orcid":"0009-0001-8565-8199"}],"year":"2016","department":[{"_id":"DEP1055"},{"_id":"DEP1025"},{"_id":"DEP1028"}],"conference":{"start_date":"2016-09-05","end_date":"2016-09-07","name":"Sommerakademie","location":"Bad Meinberg"}},{"publication":"Stadt der Zukunft : digital","date_created":"2021-05-13T19:48:18Z","type":"conference_abstract","user_id":"83781","date_updated":"2024-12-04T13:11:42Z","corporate_editor":["urbanLab - Technische Hochschule OWL"],"intvolume":" 8","place":"Detmold","language":[{"iso":"ger"}],"_id":"5890","series_title":"Regionaler Salon","title":"Die Zukunft der Stadt – digital","citation":{"ama":"Häusler A. Die Zukunft der Stadt – digital. In: urbanLab - Technische Hochschule OWL, ed. Stadt der Zukunft : digital. Vol 8. Regionaler Salon. Technische Hochschule Ostwestfalen-Lippe; 2016.","ieee":"A. Häusler, “Die Zukunft der Stadt – digital,” in Stadt der Zukunft : digital, Detmold, 2016, vol. 8.","van":"Häusler A. Die Zukunft der Stadt – digital. In: urbanLab - Technische Hochschule OWL, editor. Stadt der Zukunft : digital. Detmold: Technische Hochschule Ostwestfalen-Lippe; 2016. (Regionaler Salon; vol. 8).","ufg":"Häusler, Axel: Die Zukunft der Stadt – digital, in: urbanLab - Technische Hochschule OWL (Hg.): Stadt der Zukunft : digital, Bd. 8, Detmold 2016 (Regionaler Salon).","mla":"Häusler, Axel. “Die Zukunft der Stadt – digital.” Stadt der Zukunft : digital, edited by urbanLab - Technische Hochschule OWL, vol. 8, Technische Hochschule Ostwestfalen-Lippe, 2016.","bjps":"Häusler A (2016) Die Zukunft der Stadt – digital. In urbanLab - Technische Hochschule OWL (ed.), Stadt der Zukunft : digital, vol. 8. Detmold: Technische Hochschule Ostwestfalen-Lippe.","havard":"A. Häusler, Die Zukunft der Stadt – digital, in: urbanLab - Technische Hochschule OWL (Ed.), Stadt der Zukunft : digital, Technische Hochschule Ostwestfalen-Lippe, Detmold, 2016.","apa":"Häusler, A. (2016). Die Zukunft der Stadt – digital. In urbanLab - Technische Hochschule OWL (Ed.), Stadt der Zukunft : digital (Vol. 8). Technische Hochschule Ostwestfalen-Lippe.","chicago":"Häusler, Axel. “Die Zukunft der Stadt – digital.” In Stadt der Zukunft : digital, edited by urbanLab - Technische Hochschule OWL, Vol. 8. Regionaler Salon. Detmold: Technische Hochschule Ostwestfalen-Lippe, 2016.","short":"A. Häusler, in: urbanLab - Technische Hochschule OWL (Ed.), Stadt der Zukunft : digital, Technische Hochschule Ostwestfalen-Lippe, Detmold, 2016.","din1505-2-1":"Häusler, Axel: Die Zukunft der Stadt – digital. In: urbanLab - Technische Hochschule OWL (Hrsg.): Stadt der Zukunft : digital, Regionaler Salon. Bd. 8. Detmold : Technische Hochschule Ostwestfalen-Lippe, 2016","chicago-de":"Häusler, Axel. 2016. Die Zukunft der Stadt – digital. In: Stadt der Zukunft : digital, hg. von urbanLab - Technische Hochschule OWL, 8:. Regionaler Salon. Detmold: Technische Hochschule Ostwestfalen-Lippe."},"volume":8,"publication_status":"published","year":"2016","author":[{"orcid":"0009-0001-8565-8199","first_name":"Axel","full_name":"Häusler, Axel","last_name":"Häusler","id":"61520"}],"department":[{"_id":"DEP1055"},{"_id":"DEP1025"},{"_id":"DEP1028"}],"conference":{"name":"8. Regionaler Salon","location":"Detmold","start_date":"2016-11-16","end_date":"2016-11-16"},"status":"public","publisher":"Technische Hochschule Ostwestfalen-Lippe"},{"abstract":[{"lang":"eng","text":"The reduction of wires and connections is a fundamental necessity for upcoming industrial 4.0 solutions, requiring a large amount of reconfigurability and flexibility. Our research focuses on recent ways of combining energy and data transmission in single contactless transducers, enabling easy installation, maintenance and possible fulfilment of high protection classes. While this approach can typically be solved by combining Wifi and inductive energy transfer, the Wifi aspect is often limited by the available media access and channel occupation. Another issue is the real time capability of Wifi or other wireless transmission protocols like IEEE 802.15.4. While creating a new wireless or contactless standard is beyond the focus of this work, we concentrate on combining existing technologies and their interoperability. This includes powerline communication systems, near field data transmission and inductive energy transfer mechanisms."}],"department":[{"_id":"DEP5000"},{"_id":"DEP5023"}],"conference":{"location":"Aveiro, Portugal","name":"IEEE World Conference on Factory Communication Systems (WFCS)","start_date":"2016-05-03","end_date":"2016-05-06"},"year":"2016","author":[{"id":"1273","full_name":"Wesemann, Derk","first_name":"Derk","last_name":"Wesemann"},{"id":"1605","first_name":"Stefan","last_name":"Witte","full_name":"Witte, Stefan"},{"first_name":"Andreas","id":"10982","full_name":"Schmelter, Andreas","last_name":"Schmelter"},{"last_name":"Heß","full_name":"Heß, Roland","first_name":"Roland"}],"publisher":"IEEE","status":"public","title":"Flexible factory automation: Potentials of contactless transmission systems, combining state-of-the-art technologies","publication_status":"published","citation":{"chicago":"Wesemann, Derk, Stefan Witte, Andreas Schmelter, and Roland Heß. Flexible Factory Automation: Potentials of Contactless Transmission Systems, Combining State-of-the-Art Technologies. Communication in Automation : 2016 IEEE World Conference on Factory Communication Systems (WFCS)$dMay 3-6, 2016, Aveiro, Portugal. Piscataway, NJ : IEEE, 2016. https://doi.org/10.1109/WFCS.2016.7496533.","apa":"Wesemann, D., Witte, S., Schmelter, A., & Heß, R. (2016). Flexible factory automation: Potentials of contactless transmission systems, combining state-of-the-art technologies. In Communication in automation : 2016 IEEE World Conference on Factory Communication Systems (WFCS)$dMay 3-6, 2016, Aveiro, Portugal. IEEE World Conference on Factory Communication Systems (WFCS), Aveiro, Portugal. IEEE. https://doi.org/10.1109/WFCS.2016.7496533","ieee":"D. Wesemann, S. Witte, A. Schmelter, and R. Heß, Flexible factory automation: Potentials of contactless transmission systems, combining state-of-the-art technologies. Piscataway, NJ : IEEE, 2016. doi: 10.1109/WFCS.2016.7496533.","ufg":"Wesemann, Derk u. a.: Flexible factory automation: Potentials of contactless transmission systems, combining state-of-the-art technologies, Piscataway, NJ 2016.","bjps":"Wesemann D et al. (2016) Flexible Factory Automation: Potentials of Contactless Transmission Systems, Combining State-of-the-Art Technologies. Piscataway, NJ : IEEE.","mla":"Wesemann, Derk, et al. “Flexible Factory Automation: Potentials of Contactless Transmission Systems, Combining State-of-the-Art Technologies.” Communication in Automation : 2016 IEEE World Conference on Factory Communication Systems (WFCS)$dMay 3-6, 2016, Aveiro, Portugal, IEEE, 2016, https://doi.org/10.1109/WFCS.2016.7496533.","havard":"D. Wesemann, S. Witte, A. Schmelter, R. Heß, Flexible factory automation: Potentials of contactless transmission systems, combining state-of-the-art technologies, IEEE, Piscataway, NJ , 2016.","van":"Wesemann D, Witte S, Schmelter A, Heß R. Flexible factory automation: Potentials of contactless transmission systems, combining state-of-the-art technologies. Communication in automation : 2016 IEEE World Conference on Factory Communication Systems (WFCS)$dMay 3-6, 2016, Aveiro, Portugal. Piscataway, NJ : IEEE; 2016.","ama":"Wesemann D, Witte S, Schmelter A, Heß R. Flexible Factory Automation: Potentials of Contactless Transmission Systems, Combining State-of-the-Art Technologies. IEEE; 2016. doi:10.1109/WFCS.2016.7496533","din1505-2-1":"Wesemann, Derk ; Witte, Stefan ; Schmelter, Andreas ; Heß, Roland: Flexible factory automation: Potentials of contactless transmission systems, combining state-of-the-art technologies. Piscataway, NJ : IEEE, 2016","chicago-de":"Wesemann, Derk, Stefan Witte, Andreas Schmelter und Roland Heß. 2016. Flexible factory automation: Potentials of contactless transmission systems, combining state-of-the-art technologies. Communication in automation : 2016 IEEE World Conference on Factory Communication Systems (WFCS)$dMay 3-6, 2016, Aveiro, Portugal. Piscataway, NJ : IEEE. doi:10.1109/WFCS.2016.7496533, .","short":"D. Wesemann, S. Witte, A. Schmelter, R. Heß, Flexible Factory Automation: Potentials of Contactless Transmission Systems, Combining State-of-the-Art Technologies, IEEE, Piscataway, NJ , 2016."},"doi":"10.1109/WFCS.2016.7496533","_id":"10169","language":[{"iso":"eng"}],"place":"Piscataway, NJ ","keyword":["Automation","Industry 4.0","Contactless Data Transmission","Contactless Energy Transmission","Wireless Communication"],"date_created":"2023-07-27T11:13:52Z","type":"conference_editor_article","publication":"Communication in automation : 2016 IEEE World Conference on Factory Communication Systems (WFCS)$dMay 3-6, 2016, Aveiro, Portugal","publication_identifier":{"isbn":[" 978-1-5090-2339-4 "]},"date_updated":"2023-07-28T12:28:27Z","user_id":"83781"},{"department":[{"_id":"DEP5023"}],"author":[{"full_name":"Trsek, Henning","first_name":"Henning","last_name":"Trsek"}],"year":"2016","abstract":[{"lang":"eng","text":"This dissertation proposes and investigates an isochronous wireless network for industrial control applications with guaranteed latencies and jitter. Based on a requirements analysis of real industrial applications and the characterisation of the wireless channel, the solution approach is developed. It consists of a TDMA-based medium access control, a dynamic resource allocation and the provision of a global time base for the wired and the wireless network. Due to the global time base, the solution approach allows a seamless and synchronous integration into existing wired Real-time Ethernet systems."}],"status":"public","publisher":"Springer ","series_title":"Technologien für die intelligente Automation","title":"Isochronous Wireless Network for Real-time Communication in Industrial Automation","publication_status":"published","citation":{"chicago-de":"Trsek, Henning. 2016. Isochronous Wireless Network for Real-time Communication in Industrial Automation. Technologien für die intelligente Automation. Berlin, Heidelberg: Springer . doi:10.1007/978-3-662-49158-4, .","din1505-2-1":"Trsek, Henning: Isochronous Wireless Network for Real-time Communication in Industrial Automation, Technologien für die intelligente Automation. Berlin, Heidelberg : Springer , 2016","short":"H. Trsek, Isochronous Wireless Network for Real-Time Communication in Industrial Automation, Springer , Berlin, Heidelberg, 2016.","bjps":"Trsek H (2016) Isochronous Wireless Network for Real-Time Communication in Industrial Automation. Berlin, Heidelberg: Springer .","havard":"H. Trsek, Isochronous Wireless Network for Real-time Communication in Industrial Automation, Springer , Berlin, Heidelberg, 2016.","mla":"Trsek, Henning. Isochronous Wireless Network for Real-Time Communication in Industrial Automation. Springer , 2016, https://doi.org/10.1007/978-3-662-49158-4.","ufg":"Trsek, Henning: Isochronous Wireless Network for Real-time Communication in Industrial Automation, Berlin, Heidelberg 2016 (Technologien für die intelligente Automation).","van":"Trsek H. Isochronous Wireless Network for Real-time Communication in Industrial Automation. Berlin, Heidelberg: Springer ; 2016. (Technologien für die intelligente Automation).","chicago":"Trsek, Henning. Isochronous Wireless Network for Real-Time Communication in Industrial Automation. Technologien Für Die Intelligente Automation. Berlin, Heidelberg: Springer , 2016. https://doi.org/10.1007/978-3-662-49158-4.","apa":"Trsek, H. (2016). Isochronous Wireless Network for Real-time Communication in Industrial Automation. Springer . https://doi.org/10.1007/978-3-662-49158-4","ama":"Trsek H. Isochronous Wireless Network for Real-Time Communication in Industrial Automation. Springer ; 2016. doi:10.1007/978-3-662-49158-4","ieee":"H. Trsek, Isochronous Wireless Network for Real-time Communication in Industrial Automation. Berlin, Heidelberg: Springer , 2016. doi: 10.1007/978-3-662-49158-4."},"language":[{"iso":"eng"}],"place":"Berlin, Heidelberg","keyword":["industrial wireless system","wireless real-time communication","deterministic medium access control","isochronous WLAN","industrial automation"],"doi":"10.1007/978-3-662-49158-4","_id":"11142","date_created":"2024-03-01T08:09:01Z","type":"dissertation","publication_identifier":{"isbn":["978-3-662-49157-7"],"eissn":["2522-8587"],"eisbn":["978-3-662-49158-4"],"issn":["2522-8579 "]},"date_updated":"2024-03-05T14:34:59Z","user_id":"83781"},{"publication":"Tagungsband des Entwicklerforums \"HMI – Komponenten Lösungen\"","type":"conference","date_created":"2021-02-02T08:11:42Z","user_id":"68554","date_updated":"2023-03-15T13:49:55Z","_id":"4782","place":"München","language":[{"iso":"eng"}],"title":"Natürlichsprachliche Schnittstelle für Produktionssysteme","citation":{"ama":"Bunte A, Diedrich A, Niggemann O. Natürlichsprachliche Schnittstelle für Produktionssysteme. In: Tagungsband Des Entwicklerforums “HMI – Komponenten Lösungen.” München: HMI; 2016.","ieee":"A. Bunte, A. Diedrich, and O. Niggemann, “Natürlichsprachliche Schnittstelle für Produktionssysteme,” in Tagungsband des Entwicklerforums “HMI – Komponenten Lösungen,” 2016.","short":"A. Bunte, A. Diedrich, O. Niggemann, in: Tagungsband Des Entwicklerforums “HMI – Komponenten Lösungen,” HMI, München, 2016.","chicago-de":"Bunte, Andreas, Alexander Diedrich und Oliver Niggemann. 2016. Natürlichsprachliche Schnittstelle für Produktionssysteme. In: Tagungsband des Entwicklerforums „HMI – Komponenten Lösungen“. München: HMI.","din1505-2-1":"Bunte, Andreas ; Diedrich, Alexander ; Niggemann, Oliver: Natürlichsprachliche Schnittstelle für Produktionssysteme. In: Tagungsband des Entwicklerforums „HMI – Komponenten Lösungen“. München : HMI, 2016","van":"Bunte A, Diedrich A, Niggemann O. Natürlichsprachliche Schnittstelle für Produktionssysteme. In: Tagungsband des Entwicklerforums “HMI – Komponenten Lösungen.” München: HMI; 2016.","ufg":"Bunte, Andreas et. al. (2016): Natürlichsprachliche Schnittstelle für Produktionssysteme, in: Tagungsband des Entwicklerforums „HMI – Komponenten Lösungen“, München.","mla":"Bunte, Andreas, et al. “Natürlichsprachliche Schnittstelle Für Produktionssysteme.” Tagungsband Des Entwicklerforums “HMI – Komponenten Lösungen,” HMI, 2016.","bjps":"Bunte A, Diedrich A and Niggemann O (2016) Natürlichsprachliche Schnittstelle Für Produktionssysteme. Tagungsband Des Entwicklerforums ‘HMI – Komponenten Lösungen’. München: HMI.","havard":"A. Bunte, A. Diedrich, O. Niggemann, Natürlichsprachliche Schnittstelle für Produktionssysteme, in: Tagungsband Des Entwicklerforums “HMI – Komponenten Lösungen,” HMI, München, 2016.","apa":"Bunte, A., Diedrich, A., & Niggemann, O. (2016). Natürlichsprachliche Schnittstelle für Produktionssysteme. In Tagungsband des Entwicklerforums “HMI – Komponenten Lösungen.” München: HMI.","chicago":"Bunte, Andreas, Alexander Diedrich, and Oliver Niggemann. “Natürlichsprachliche Schnittstelle Für Produktionssysteme.” In Tagungsband Des Entwicklerforums “HMI – Komponenten Lösungen.” München: HMI, 2016."},"abstract":[{"text":"Die zunehmende Individualisierung von Produkten stellt neue Anforderun-\r\ngen an Produktionsanlagen, wodurch deren Komplexit¨at steigt. Damit komplexe An-\r\nlagen effizient bedient werden k¨onnen, vor allem im Fall eines Fehlers, sind neue Inter-\r\naktionskonzepte erforderlich. In dieser Arbeit wurde ein Konzept f¨ur die Sprachverar-\r\nbeitung entworfen und prototypisch implementiert. Zus¨atzlich zur Sprachverarbeitung\r\nist eine semantische Schicht notwendig um eine Steuerung ¨uber Sprache zu realisieren","lang":"ger"}],"author":[{"first_name":"Andreas","full_name":"Bunte, Andreas","last_name":"Bunte","id":"58885"},{"full_name":"Diedrich, Alexander","last_name":"Diedrich","first_name":"Alexander"},{"id":"10876","last_name":"Niggemann","full_name":"Niggemann, Oliver","first_name":"Oliver"}],"main_file_link":[{"url":"https://www.researchgate.net/publication/304525199_Naturlichsprachliche_Schnittstelle_fur_Produktionssysteme"}],"year":2016,"department":[{"_id":"DEP5023"}],"publisher":"HMI","status":"public"},{"date_created":"2021-02-02T08:25:27Z","type":"conference","publication":"International Workshop on the Principles of Diagnosis (DX)","date_updated":"2023-03-15T13:49:55Z","user_id":"68554","language":[{"iso":"eng"}],"place":"Denver, CO, USA","_id":"4790","title":"Semantics Enable Standardized User Interfaces for Diagnosis in Modular Production Systems","citation":{"ieee":"A. Bunte, A. Diedrich, and O. Niggemann, “Semantics Enable Standardized User Interfaces for Diagnosis in Modular Production Systems,” in International Workshop on the Principles of Diagnosis (DX), 2016.","ama":"Bunte A, Diedrich A, Niggemann O. Semantics Enable Standardized User Interfaces for Diagnosis in Modular Production Systems. In: International Workshop on the Principles of Diagnosis (DX). Denver, CO, USA; 2016.","chicago-de":"Bunte, Andreas, Alexander Diedrich und Oliver Niggemann. 2016. Semantics Enable Standardized User Interfaces for Diagnosis in Modular Production Systems. In: International Workshop on the Principles of Diagnosis (DX). Denver, CO, USA.","din1505-2-1":"Bunte, Andreas ; Diedrich, Alexander ; Niggemann, Oliver: Semantics Enable Standardized User Interfaces for Diagnosis in Modular Production Systems. In: International Workshop on the Principles of Diagnosis (DX). Denver, CO, USA, 2016","short":"A. Bunte, A. Diedrich, O. Niggemann, in: International Workshop on the Principles of Diagnosis (DX), Denver, CO, USA, 2016.","chicago":"Bunte, Andreas, Alexander Diedrich, and Oliver Niggemann. “Semantics Enable Standardized User Interfaces for Diagnosis in Modular Production Systems.” In International Workshop on the Principles of Diagnosis (DX). Denver, CO, USA, 2016.","apa":"Bunte, A., Diedrich, A., & Niggemann, O. (2016). Semantics Enable Standardized User Interfaces for Diagnosis in Modular Production Systems. In International Workshop on the Principles of Diagnosis (DX). Denver, CO, USA.","mla":"Bunte, Andreas, et al. “Semantics Enable Standardized User Interfaces for Diagnosis in Modular Production Systems.” International Workshop on the Principles of Diagnosis (DX), 2016.","bjps":"Bunte A, Diedrich A and Niggemann O (2016) Semantics Enable Standardized User Interfaces for Diagnosis in Modular Production Systems. International Workshop on the Principles of Diagnosis (DX). Denver, CO, USA.","havard":"A. Bunte, A. Diedrich, O. Niggemann, Semantics Enable Standardized User Interfaces for Diagnosis in Modular Production Systems, in: International Workshop on the Principles of Diagnosis (DX), Denver, CO, USA, 2016.","ufg":"Bunte, Andreas et. al. (2016): Semantics Enable Standardized User Interfaces for Diagnosis in Modular Production Systems, in: International Workshop on the Principles of Diagnosis (DX), Denver, CO, USA.","van":"Bunte A, Diedrich A, Niggemann O. Semantics Enable Standardized User Interfaces for Diagnosis in Modular Production Systems. In: International Workshop on the Principles of Diagnosis (DX). Denver, CO, USA; 2016."},"department":[{"_id":"DEP5023"}],"year":2016,"author":[{"id":"58885","full_name":"Bunte, Andreas","first_name":"Andreas","last_name":"Bunte"},{"first_name":"Alexander","last_name":"Diedrich","full_name":"Diedrich, Alexander"},{"last_name":"Niggemann","full_name":"Niggemann, Oliver","id":"10876","first_name":"Oliver"}],"status":"public"},{"date_created":"2021-02-02T08:26:21Z","type":"conference","publication":"21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)","date_updated":"2023-03-15T13:49:55Z","user_id":"68554","language":[{"iso":"eng"}],"place":"Berlin","_id":"4791","title":"Integrating Semantics for Diagnosis of Manufacturing Systems","citation":{"din1505-2-1":"Bunte, Andreas ; Diedrich, Alexander ; Niggemann, Oliver: Integrating Semantics for Diagnosis of Manufacturing Systems. In: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Berlin, 2016","chicago-de":"Bunte, Andreas, Alexander Diedrich und Oliver Niggemann. 2016. Integrating Semantics for Diagnosis of Manufacturing Systems. In: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Berlin.","short":"A. Bunte, A. Diedrich, O. Niggemann, in: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Berlin, 2016.","mla":"Bunte, Andreas, et al. “Integrating Semantics for Diagnosis of Manufacturing Systems.” 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2016.","bjps":"Bunte A, Diedrich A and Niggemann O (2016) Integrating Semantics for Diagnosis of Manufacturing Systems. 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Berlin.","havard":"A. Bunte, A. Diedrich, O. Niggemann, Integrating Semantics for Diagnosis of Manufacturing Systems, in: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Berlin, 2016.","ufg":"Bunte, Andreas et. al. (2016): Integrating Semantics for Diagnosis of Manufacturing Systems, in: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Berlin.","van":"Bunte A, Diedrich A, Niggemann O. Integrating Semantics for Diagnosis of Manufacturing Systems. In: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Berlin; 2016.","chicago":"Bunte, Andreas, Alexander Diedrich, and Oliver Niggemann. “Integrating Semantics for Diagnosis of Manufacturing Systems.” In 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Berlin, 2016.","apa":"Bunte, A., Diedrich, A., & Niggemann, O. (2016). Integrating Semantics for Diagnosis of Manufacturing Systems. In 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Berlin.","ama":"Bunte A, Diedrich A, Niggemann O. Integrating Semantics for Diagnosis of Manufacturing Systems. In: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Berlin; 2016.","ieee":"A. Bunte, A. Diedrich, and O. Niggemann, “Integrating Semantics for Diagnosis of Manufacturing Systems,” in 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2016."},"department":[{"_id":"DEP5023"}],"year":2016,"author":[{"first_name":"Andreas","full_name":"Bunte, Andreas","id":"58885","last_name":"Bunte"},{"first_name":"Alexander","last_name":"Diedrich","full_name":"Diedrich, Alexander"},{"last_name":"Niggemann","first_name":"Oliver","full_name":"Niggemann, Oliver","id":"10876"}],"status":"public"},{"citation":{"ama":"Niggemann O, Biswas G, Khorasgani H, Volgmann S, Bunte A. Datenanalyse in der intelligenten Fabrik. In: Vogel-Hauser B, Bauernhansl T, ten Hompel M, eds. Handbuch Industrie 4.0 Bd. 2. Berlin, Heidelberg: Springer Berlin Heidelberg; 2016.","ieee":"O. Niggemann, G. Biswas, H. Khorasgani, S. Volgmann, and A. Bunte, “Datenanalyse in der intelligenten Fabrik,” in Handbuch Industrie 4.0 Bd. 2, B. Vogel-Hauser, T. Bauernhansl, and M. ten Hompel, Eds. Berlin, Heidelberg: Springer Berlin Heidelberg, 2016.","van":"Niggemann O, Biswas G, Khorasgani H, Volgmann S, Bunte A. Datenanalyse in der intelligenten Fabrik. In: Vogel-Hauser B, Bauernhansl T, ten Hompel M, editors. Handbuch Industrie 40 Bd 2. Berlin, Heidelberg: Springer Berlin Heidelberg; 2016.","ufg":"Niggemann, Oliver et. al. (2016): Datenanalyse in der intelligenten Fabrik, in: Birgit Vogel-Hauser et. al. (Hgg.): Handbuch Industrie 4.0 Bd. 2, Berlin, Heidelberg.","havard":"O. Niggemann, G. Biswas, H. Khorasgani, S. Volgmann, A. Bunte, Datenanalyse in der intelligenten Fabrik, in: B. Vogel-Hauser, T. Bauernhansl, M. ten Hompel (Eds.), Handbuch Industrie 4.0 Bd. 2, Springer Berlin Heidelberg, Berlin, Heidelberg, 2016.","bjps":"Niggemann O et al. (2016) Datenanalyse in Der Intelligenten Fabrik. In Vogel-Hauser B, Bauernhansl T and ten Hompel M (eds), Handbuch Industrie 4.0 Bd. 2. Berlin, Heidelberg: Springer Berlin Heidelberg.","mla":"Niggemann, Oliver, et al. “Datenanalyse in Der Intelligenten Fabrik.” Handbuch Industrie 4.0 Bd. 2, edited by Birgit Vogel-Hauser et al., Springer Berlin Heidelberg, 2016.","apa":"Niggemann, O., Biswas, G., Khorasgani, H., Volgmann, S., & Bunte, A. (2016). Datenanalyse in der intelligenten Fabrik. In B. Vogel-Hauser, T. Bauernhansl, & M. ten Hompel (Eds.), Handbuch Industrie 4.0 Bd. 2. Berlin, Heidelberg: Springer Berlin Heidelberg.","chicago":"Niggemann, Oliver, Gautam Biswas, Hamed Khorasgani, Sören Volgmann, and Andreas Bunte. “Datenanalyse in Der Intelligenten Fabrik.” In Handbuch Industrie 4.0 Bd. 2, edited by Birgit Vogel-Hauser, Thomas Bauernhansl, and Michael ten Hompel. Berlin, Heidelberg: Springer Berlin Heidelberg, 2016.","short":"O. Niggemann, G. Biswas, H. Khorasgani, S. Volgmann, A. Bunte, in: B. Vogel-Hauser, T. Bauernhansl, M. ten Hompel (Eds.), Handbuch Industrie 4.0 Bd. 2, Springer Berlin Heidelberg, Berlin, Heidelberg, 2016.","din1505-2-1":"Niggemann, Oliver ; Biswas, Gautam ; Khorasgani, Hamed ; Volgmann, Sören ; Bunte, Andreas: Datenanalyse in der intelligenten Fabrik. In: Vogel-Hauser, B. ; Bauernhansl, T. ; ten Hompel, M. (Hrsg.): Handbuch Industrie 4.0 Bd. 2. Berlin, Heidelberg : Springer Berlin Heidelberg, 2016","chicago-de":"Niggemann, Oliver, Gautam Biswas, Hamed Khorasgani, Sören Volgmann und Andreas Bunte. 2016. Datenanalyse in der intelligenten Fabrik. In: Handbuch Industrie 4.0 Bd. 2, hg. von Birgit Vogel-Hauser, Thomas Bauernhansl, und Michael ten Hompel. Berlin, Heidelberg: Springer Berlin Heidelberg."},"title":"Datenanalyse in der intelligenten Fabrik","publisher":"Springer Berlin Heidelberg","status":"public","department":[{"_id":"DEP5023"}],"author":[{"last_name":"Niggemann","id":"10876","full_name":"Niggemann, Oliver","first_name":"Oliver"},{"first_name":"Gautam","full_name":"Biswas, Gautam","last_name":"Biswas"},{"full_name":"Khorasgani, Hamed","first_name":"Hamed","last_name":"Khorasgani"},{"first_name":"Sören","full_name":"Volgmann, Sören","last_name":"Volgmann"},{"first_name":"Andreas","full_name":"Bunte, Andreas","id":"58885","last_name":"Bunte"}],"year":2016,"main_file_link":[{"url":"https://link.springer.com/chapter/10.1007/978-3-662-53248-5_73"}],"editor":[{"first_name":"Birgit","full_name":"Vogel-Hauser, Birgit","last_name":"Vogel-Hauser"},{"full_name":"Bauernhansl, Thomas","first_name":"Thomas","last_name":"Bauernhansl"},{"last_name":"ten Hompel","first_name":"Michael","full_name":"ten Hompel, Michael"}],"date_updated":"2023-03-15T13:49:55Z","user_id":"68554","type":"book_chapter","date_created":"2021-02-02T08:28:14Z","publication":"Handbuch Industrie 4.0 Bd. 2","_id":"4792","language":[{"iso":"eng"}],"place":"Berlin, Heidelberg"},{"publication":"KommA 2016 – Jahreskolloquium Kommunikation in der Automation","date_created":"2021-02-02T13:18:20Z","type":"conference","user_id":"68554","date_updated":"2023-03-15T13:49:56Z","_id":"4853","place":"Lemgo","language":[{"iso":"ger"}],"title":"Übertragbarkeit des PlugPlay-Prinzips aus der Informationstechnik auf die Automatisierungstechnik","citation":{"ieee":"L. Dürkop and J. Jasperneite, “Übertragbarkeit des PlugPlay-Prinzips aus der Informationstechnik auf die Automatisierungstechnik,” in KommA 2016 – Jahreskolloquium Kommunikation in der Automation, 2016.","ama":"Dürkop L, Jasperneite J. Übertragbarkeit des PlugPlay-Prinzips aus der Informationstechnik auf die Automatisierungstechnik. In: KommA 2016 – Jahreskolloquium Kommunikation in der Automation. Lemgo; 2016.","din1505-2-1":"Dürkop, Lars ; Jasperneite, Jürgen: Übertragbarkeit des PlugPlay-Prinzips aus der Informationstechnik auf die Automatisierungstechnik. In: KommA 2016 – Jahreskolloquium Kommunikation in der Automation. Lemgo, 2016","chicago-de":"Dürkop, Lars und Jürgen Jasperneite. 2016. Übertragbarkeit des PlugPlay-Prinzips aus der Informationstechnik auf die Automatisierungstechnik. In: KommA 2016 – Jahreskolloquium Kommunikation in der Automation. Lemgo.","short":"L. Dürkop, J. Jasperneite, in: KommA 2016 – Jahreskolloquium Kommunikation in der Automation, Lemgo, 2016.","chicago":"Dürkop, Lars, and Jürgen Jasperneite. “Übertragbarkeit des PlugPlay-Prinzips aus der Informationstechnik auf die Automatisierungstechnik.” In KommA 2016 – Jahreskolloquium Kommunikation in der Automation. Lemgo, 2016.","apa":"Dürkop, L., & Jasperneite, J. (2016). Übertragbarkeit des PlugPlay-Prinzips aus der Informationstechnik auf die Automatisierungstechnik. In KommA 2016 – Jahreskolloquium Kommunikation in der Automation. Lemgo.","mla":"Dürkop, Lars, and Jürgen Jasperneite. “Übertragbarkeit des PlugPlay-Prinzips aus der Informationstechnik auf die Automatisierungstechnik.” KommA 2016 – Jahreskolloquium Kommunikation in der Automation, 2016.","havard":"L. Dürkop, J. Jasperneite, Übertragbarkeit des PlugPlay-Prinzips aus der Informationstechnik auf die Automatisierungstechnik, in: KommA 2016 – Jahreskolloquium Kommunikation in der Automation, Lemgo, 2016.","bjps":"Dürkop L and Jasperneite J (2016) Übertragbarkeit des PlugPlay-Prinzips aus der Informationstechnik auf die Automatisierungstechnik. KommA 2016 – Jahreskolloquium Kommunikation in der Automation. Lemgo.","ufg":"Dürkop, Lars/Jasperneite, Jürgen (2016): Übertragbarkeit des PlugPlay-Prinzips aus der Informationstechnik auf die Automatisierungstechnik, in: KommA 2016 – Jahreskolloquium Kommunikation in der Automation, Lemgo.","van":"Dürkop L, Jasperneite J. Übertragbarkeit des PlugPlay-Prinzips aus der Informationstechnik auf die Automatisierungstechnik. In: KommA 2016 – Jahreskolloquium Kommunikation in der Automation. Lemgo; 2016."},"author":[{"last_name":"Dürkop","first_name":"Lars","full_name":"Dürkop, Lars"},{"last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","id":"1899","first_name":"Jürgen"}],"year":2016,"department":[{"_id":"DEP5023"}],"status":"public"},{"conference":{"location":"Lemgo","name":"7. Jahreskolloquium Kommunikation in der Automation - KommA","start_date":"2016-11-30","end_date":"2016-11-30"},"department":[{"_id":"DEP5023"}],"main_file_link":[{"url":"https://link.springer.com/chapter/10.1007/978-3-662-55232-2_3"}],"author":[{"id":"61562","last_name":"Ehrlich","full_name":"Ehrlich, Marco","first_name":"Marco"},{"first_name":"Lukasz","last_name":"Wisniewski","id":"1710","full_name":"Wisniewski, Lukasz"},{"first_name":"Jürgen","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","id":"1899"}],"year":2016,"abstract":[{"text":"In this paper an investigation of the State of the Art of Industrial Wireless Sensor Networks (IWSNs) is performed. Therefore the given industrial requirements, different wireless communication protocols, the defined basic architecture and open research questions will be analysed. Furthermore, current challenges from the research domain will be discussed and a real use case of IWSNs from a research project in cooperation with a local industrial partner will be evaluated. To conclude this paper an outlook of further developments and possible future applications of IWSNs will be sketched.","lang":"eng"}],"page":"28-39","status":"public","title":"State of the Art and Future Applications of Industrial Wireless Sensor Networks","citation":{"ieee":"M. Ehrlich, L. Wisniewski, and J. Jasperneite, “State of the Art and Future Applications of Industrial Wireless Sensor Networks,” presented at the 7. Jahreskolloquium Kommunikation in der Automation - KommA, Lemgo, 2016, pp. 28–39.","ama":"Ehrlich M, Wisniewski L, Jasperneite J. State of the Art and Future Applications of Industrial Wireless Sensor Networks. In: ; 2016:28-39.","short":"M. Ehrlich, L. Wisniewski, J. Jasperneite, in: 2016, pp. 28–39.","chicago-de":"Ehrlich, Marco, Lukasz Wisniewski und Jürgen Jasperneite. 2016. State of the Art and Future Applications of Industrial Wireless Sensor Networks. In: , 28–39.","din1505-2-1":"Ehrlich, Marco ; Wisniewski, Lukasz ; Jasperneite, Jürgen: State of the Art and Future Applications of Industrial Wireless Sensor Networks. In: , 2016, S. 28–39","apa":"Ehrlich, M., Wisniewski, L., & Jasperneite, J. (2016). State of the Art and Future Applications of Industrial Wireless Sensor Networks (pp. 28–39). Presented at the 7. Jahreskolloquium Kommunikation in der Automation - KommA, Lemgo.","chicago":"Ehrlich, Marco, Lukasz Wisniewski, and Jürgen Jasperneite. “State of the Art and Future Applications of Industrial Wireless Sensor Networks,” 28–39, 2016.","van":"Ehrlich M, Wisniewski L, Jasperneite J. State of the Art and Future Applications of Industrial Wireless Sensor Networks. In 2016. p. 28–39.","bjps":"Ehrlich M, Wisniewski L and Jasperneite J (2016) State of the Art and Future Applications of Industrial Wireless Sensor Networks. pp. 28–39.","mla":"Ehrlich, Marco, et al. State of the Art and Future Applications of Industrial Wireless Sensor Networks. 2016, pp. 28–39.","havard":"M. Ehrlich, L. Wisniewski, J. Jasperneite, State of the Art and Future Applications of Industrial Wireless Sensor Networks, in: 2016: pp. 28–39.","ufg":"Ehrlich, Marco et. al. (2016): State of the Art and Future Applications of Industrial Wireless Sensor Networks, in: , S. 28–39."},"language":[{"iso":"eng"}],"_id":"4854","date_created":"2021-02-02T13:19:22Z","type":"conference","date_updated":"2023-03-15T13:49:56Z","user_id":"68554"},{"language":[{"iso":"eng"}],"_id":"4859","date_created":"2021-02-02T13:31:24Z","type":"conference","date_updated":"2023-03-15T13:49:56Z","user_id":"68554","department":[{"_id":"DEP5023"}],"year":2016,"author":[{"first_name":"Mohammad","id":"58263","last_name":"Elattar","full_name":"Elattar, Mohammad"},{"first_name":"Verena","full_name":"Wendt, Verena","last_name":"Wendt"},{"first_name":"Jürgen","full_name":"Jasperneite, Jürgen","id":"1899","last_name":"Jasperneite"}],"status":"public","publisher":"Springer","title":"Communications for Cyber-Physical Systems","citation":{"ama":"Elattar M, Wendt V, Jasperneite J. Communications for Cyber-Physical Systems. In: Springer; 2016.","ieee":"M. Elattar, V. Wendt, and J. Jasperneite, “Communications for Cyber-Physical Systems,” 2016.","ufg":"Elattar, Mohammad et. al. (2016): Communications for Cyber-Physical Systems, in: .","bjps":"Elattar M, Wendt V and Jasperneite J (2016) Communications for Cyber-Physical Systems. Springer.","havard":"M. Elattar, V. Wendt, J. Jasperneite, Communications for Cyber-Physical Systems, in: Springer, 2016.","mla":"Elattar, Mohammad, et al. Communications for Cyber-Physical Systems. Springer, 2016.","van":"Elattar M, Wendt V, Jasperneite J. Communications for Cyber-Physical Systems. In Springer; 2016.","chicago":"Elattar, Mohammad, Verena Wendt, and Jürgen Jasperneite. “Communications for Cyber-Physical Systems.” Springer, 2016.","apa":"Elattar, M., Wendt, V., & Jasperneite, J. (2016). Communications for Cyber-Physical Systems. Springer.","din1505-2-1":"Elattar, Mohammad ; Wendt, Verena ; Jasperneite, Jürgen: Communications for Cyber-Physical Systems. In: : Springer, 2016","chicago-de":"Elattar, Mohammad, Verena Wendt und Jürgen Jasperneite. 2016. Communications for Cyber-Physical Systems. In: . Springer.","short":"M. Elattar, V. Wendt, J. Jasperneite, in: Springer, 2016."}},{"publication":"Vortrag Schlossrunde der Gesellschaft für Wirtschaftsförderung im Kreis Höxter mbH, der Industrie- und Handelskammer Ostwestfalen zu Bielefeld, und der Hochschule OWL","date_created":"2021-02-02T13:34:10Z","type":"conference","user_id":"68554","date_updated":"2023-03-15T13:49:56Z","_id":"4862","place":"Abtei Marienmünster","language":[{"iso":"ger"}],"title":"Digital in NRW: Wie kommt Industrie 4.0 in den Mittelstand?","citation":{"ieee":"J. Jasperneite, “Digital in NRW: Wie kommt Industrie 4.0 in den Mittelstand?,” in Vortrag Schlossrunde der Gesellschaft für Wirtschaftsförderung im Kreis Höxter mbH, der Industrie- und Handelskammer Ostwestfalen zu Bielefeld, und der Hochschule OWL, 2016.","ama":"Jasperneite J. Digital in NRW: Wie kommt Industrie 4.0 in den Mittelstand? In: Vortrag Schlossrunde der Gesellschaft für Wirtschaftsförderung im Kreis Höxter mbH, der Industrie- und Handelskammer Ostwestfalen zu Bielefeld, und der Hochschule OWL. Abtei Marienmünster; 2016.","apa":"Jasperneite, J. (2016). Digital in NRW: Wie kommt Industrie 4.0 in den Mittelstand? In Vortrag Schlossrunde der Gesellschaft für Wirtschaftsförderung im Kreis Höxter mbH, der Industrie- und Handelskammer Ostwestfalen zu Bielefeld, und der Hochschule OWL. Abtei Marienmünster.","chicago":"Jasperneite, Jürgen. “Digital in NRW: Wie kommt Industrie 4.0 in den Mittelstand?” In Vortrag Schlossrunde der Gesellschaft für Wirtschaftsförderung im Kreis Höxter mbH, der Industrie- und Handelskammer Ostwestfalen zu Bielefeld, und der Hochschule OWL. Abtei Marienmünster, 2016.","van":"Jasperneite J. Digital in NRW: Wie kommt Industrie 4.0 in den Mittelstand? In: Vortrag Schlossrunde der Gesellschaft für Wirtschaftsförderung im Kreis Höxter mbH, der Industrie- und Handelskammer Ostwestfalen zu Bielefeld, und der Hochschule OWL. Abtei Marienmünster; 2016.","mla":"Jasperneite, Jürgen. “Digital in NRW: Wie kommt Industrie 4.0 in den Mittelstand?” Vortrag Schlossrunde der Gesellschaft für Wirtschaftsförderung im Kreis Höxter mbH, der Industrie- und Handelskammer Ostwestfalen zu Bielefeld, und der Hochschule OWL, 2016.","bjps":"Jasperneite J (2016) Digital in NRW: Wie kommt Industrie 4.0 in den Mittelstand? Vortrag Schlossrunde der Gesellschaft für Wirtschaftsförderung im Kreis Höxter mbH, der Industrie- und Handelskammer Ostwestfalen zu Bielefeld, und der Hochschule OWL. Abtei Marienmünster.","havard":"J. Jasperneite, Digital in NRW: Wie kommt Industrie 4.0 in den Mittelstand?, in: Vortrag Schlossrunde der Gesellschaft für Wirtschaftsförderung im Kreis Höxter mbH, der Industrie- und Handelskammer Ostwestfalen zu Bielefeld, und der Hochschule OWL, Abtei Marienmünster, 2016.","ufg":"Jasperneite, Jürgen (2016): Digital in NRW: Wie kommt Industrie 4.0 in den Mittelstand?, in: Vortrag Schlossrunde der Gesellschaft für Wirtschaftsförderung im Kreis Höxter mbH, der Industrie- und Handelskammer Ostwestfalen zu Bielefeld, und der Hochschule OWL, Abtei Marienmünster.","short":"J. Jasperneite, in: Vortrag Schlossrunde der Gesellschaft für Wirtschaftsförderung im Kreis Höxter mbH, der Industrie- und Handelskammer Ostwestfalen zu Bielefeld, und der Hochschule OWL, Abtei Marienmünster, 2016.","din1505-2-1":"Jasperneite, Jürgen: Digital in NRW: Wie kommt Industrie 4.0 in den Mittelstand? In: Vortrag Schlossrunde der Gesellschaft für Wirtschaftsförderung im Kreis Höxter mbH, der Industrie- und Handelskammer Ostwestfalen zu Bielefeld, und der Hochschule OWL. Abtei Marienmünster, 2016","chicago-de":"Jasperneite, Jürgen. 2016. Digital in NRW: Wie kommt Industrie 4.0 in den Mittelstand? In: Vortrag Schlossrunde der Gesellschaft für Wirtschaftsförderung im Kreis Höxter mbH, der Industrie- und Handelskammer Ostwestfalen zu Bielefeld, und der Hochschule OWL. Abtei Marienmünster."},"author":[{"full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","first_name":"Jürgen","id":"1899"}],"year":2016,"department":[{"_id":"DEP5023"}],"status":"public"},{"title":"Wie intelligent werden Maschinen?","citation":{"ieee":"J. Jasperneite and O. Niggemann, “Wie intelligent werden Maschinen?,” in Vortrag anlässlich des 50 jährigen Bestehens der Lemgoer Elektrotechnik, 2016.","ama":"Jasperneite J, Niggemann O. Wie intelligent werden Maschinen? In: Vortrag anlässlich des 50 jährigen Bestehens der Lemgoer Elektrotechnik. Lemgo; 2016.","chicago":"Jasperneite, Jürgen, and Oliver Niggemann. “Wie intelligent werden Maschinen?” In Vortrag anlässlich des 50 jährigen Bestehens der Lemgoer Elektrotechnik. Lemgo, 2016.","apa":"Jasperneite, J., & Niggemann, O. (2016). Wie intelligent werden Maschinen? In Vortrag anlässlich des 50 jährigen Bestehens der Lemgoer Elektrotechnik. Lemgo.","ufg":"Jasperneite, Jürgen/Niggemann, Oliver (2016): Wie intelligent werden Maschinen?, in: Vortrag anlässlich des 50 jährigen Bestehens der Lemgoer Elektrotechnik, Lemgo.","havard":"J. Jasperneite, O. Niggemann, Wie intelligent werden Maschinen?, in: Vortrag anlässlich des 50 jährigen Bestehens der Lemgoer Elektrotechnik, Lemgo, 2016.","mla":"Jasperneite, Jürgen, and Oliver Niggemann. “Wie intelligent werden Maschinen?” Vortrag anlässlich des 50 jährigen Bestehens der Lemgoer Elektrotechnik, 2016.","bjps":"Jasperneite J and Niggemann O (2016) Wie intelligent werden Maschinen? Vortrag anlässlich des 50 jährigen Bestehens der Lemgoer Elektrotechnik. Lemgo.","van":"Jasperneite J, Niggemann O. Wie intelligent werden Maschinen? In: Vortrag anlässlich des 50 jährigen Bestehens der Lemgoer Elektrotechnik. Lemgo; 2016.","chicago-de":"Jasperneite, Jürgen und Oliver Niggemann. 2016. Wie intelligent werden Maschinen? In: Vortrag anlässlich des 50 jährigen Bestehens der Lemgoer Elektrotechnik. Lemgo.","din1505-2-1":"Jasperneite, Jürgen ; Niggemann, Oliver: Wie intelligent werden Maschinen? In: Vortrag anlässlich des 50 jährigen Bestehens der Lemgoer Elektrotechnik. Lemgo, 2016","short":"J. Jasperneite, O. Niggemann, in: Vortrag anlässlich des 50 jährigen Bestehens der Lemgoer Elektrotechnik, Lemgo, 2016."},"department":[{"_id":"DEP5023"}],"year":2016,"author":[{"id":"1899","first_name":"Jürgen","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite"},{"full_name":"Niggemann, Oliver","last_name":"Niggemann","id":"10876","first_name":"Oliver"}],"status":"public","date_created":"2021-02-02T13:35:25Z","type":"conference","publication":"Vortrag anlässlich des 50 jährigen Bestehens der Lemgoer Elektrotechnik","date_updated":"2023-03-15T13:49:56Z","user_id":"68554","_id":"4863","language":[{"iso":"ger"}],"place":"Lemgo"},{"department":[{"_id":"DEP5023"}],"year":2016,"author":[{"last_name":"Henneke","first_name":"Dominik","full_name":"Henneke, Dominik","id":"52007"},{"last_name":"Freudenmann","first_name":"Christian","full_name":"Freudenmann, Christian"},{"first_name":"Markus","full_name":"Kammerstetter, Markus","last_name":"Kammerstetter"},{"last_name":"Rua","first_name":"David","full_name":"Rua, David"},{"last_name":"Wisniewski","first_name":"Lukasz","full_name":"Wisniewski, Lukasz","id":"1710"},{"first_name":"Jürgen","id":"1899","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite"}],"status":"public","title":"Communications for AnyPLACE: A Smart Metering Platform with Management and Control Functionalities","citation":{"short":"D. Henneke, C. Freudenmann, M. Kammerstetter, D. Rua, L. Wisniewski, J. Jasperneite, in: 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), 2016.","chicago-de":"Henneke, Dominik, Christian Freudenmann, Markus Kammerstetter, David Rua, Lukasz Wisniewski und Jürgen Jasperneite. 2016. Communications for AnyPLACE: A Smart Metering Platform with Management and Control Functionalities. In: 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016).","din1505-2-1":"Henneke, Dominik ; Freudenmann, Christian ; Kammerstetter, Markus ; Rua, David ; Wisniewski, Lukasz ; Jasperneite, Jürgen: Communications for AnyPLACE: A Smart Metering Platform with Management and Control Functionalities. In: 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), 2016","van":"Henneke D, Freudenmann C, Kammerstetter M, Rua D, Wisniewski L, Jasperneite J. Communications for AnyPLACE: A Smart Metering Platform with Management and Control Functionalities. In: 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016). 2016.","bjps":"Henneke D et al. (2016) Communications for AnyPLACE: A Smart Metering Platform with Management and Control Functionalities. 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016).","havard":"D. Henneke, C. Freudenmann, M. Kammerstetter, D. Rua, L. Wisniewski, J. Jasperneite, Communications for AnyPLACE: A Smart Metering Platform with Management and Control Functionalities, in: 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), 2016.","mla":"Henneke, Dominik, et al. “Communications for AnyPLACE: A Smart Metering Platform with Management and Control Functionalities.” 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), 2016.","ufg":"Henneke, Dominik et. al. (2016): Communications for AnyPLACE: A Smart Metering Platform with Management and Control Functionalities, in: 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016).","apa":"Henneke, D., Freudenmann, C., Kammerstetter, M., Rua, D., Wisniewski, L., & Jasperneite, J. (2016). Communications for AnyPLACE: A Smart Metering Platform with Management and Control Functionalities. In 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016).","chicago":"Henneke, Dominik, Christian Freudenmann, Markus Kammerstetter, David Rua, Lukasz Wisniewski, and Jürgen Jasperneite. “Communications for AnyPLACE: A Smart Metering Platform with Management and Control Functionalities.” In 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), 2016.","ama":"Henneke D, Freudenmann C, Kammerstetter M, Rua D, Wisniewski L, Jasperneite J. Communications for AnyPLACE: A Smart Metering Platform with Management and Control Functionalities. In: 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016). ; 2016.","ieee":"D. Henneke, C. Freudenmann, M. Kammerstetter, D. Rua, L. Wisniewski, and J. Jasperneite, “Communications for AnyPLACE: A Smart Metering Platform with Management and Control Functionalities,” in 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), 2016."},"language":[{"iso":"eng"}],"_id":"4865","type":"conference","date_created":"2021-02-02T13:36:44Z","publication":"21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016)","date_updated":"2023-03-15T13:49:56Z","user_id":"68554"},{"_id":"4867","language":[{"iso":"eng"}],"date_updated":"2023-03-15T13:49:56Z","user_id":"68554","type":"conference","date_created":"2021-02-02T13:38:57Z","publication":"21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016)","publisher":"Berlin","status":"public","department":[{"_id":"DEP5023"}],"author":[{"full_name":"Elattar, Mohammad","first_name":"Mohammad","last_name":"Elattar","id":"58263"},{"full_name":"Wendt, Verena","last_name":"Wendt","first_name":"Verena"},{"first_name":"Arne","full_name":"Neumann, Arne","last_name":"Neumann","id":"61915"},{"full_name":"Jasperneite, Jürgen","first_name":"Jürgen","id":"1899","last_name":"Jasperneite"}],"year":2016,"citation":{"ama":"Elattar M, Wendt V, Neumann A, Jasperneite J. Potential of Multipath Communications to Improve Communications Reliability for Internet-based Cyber-physical Systems. In: 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016). Berlin; 2016.","ieee":"M. Elattar, V. Wendt, A. Neumann, and J. Jasperneite, “Potential of Multipath Communications to Improve Communications Reliability for Internet-based Cyber-physical Systems,” in 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), 2016.","short":"M. Elattar, V. Wendt, A. Neumann, J. Jasperneite, in: 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin, 2016.","din1505-2-1":"Elattar, Mohammad ; Wendt, Verena ; Neumann, Arne ; Jasperneite, Jürgen: Potential of Multipath Communications to Improve Communications Reliability for Internet-based Cyber-physical Systems. In: 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016) : Berlin, 2016","chicago-de":"Elattar, Mohammad, Verena Wendt, Arne Neumann und Jürgen Jasperneite. 2016. Potential of Multipath Communications to Improve Communications Reliability for Internet-based Cyber-physical Systems. In: 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016). Berlin.","van":"Elattar M, Wendt V, Neumann A, Jasperneite J. Potential of Multipath Communications to Improve Communications Reliability for Internet-based Cyber-physical Systems. In: 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016). Berlin; 2016.","bjps":"Elattar M et al. (2016) Potential of Multipath Communications to Improve Communications Reliability for Internet-Based Cyber-Physical Systems. 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016). Berlin.","mla":"Elattar, Mohammad, et al. “Potential of Multipath Communications to Improve Communications Reliability for Internet-Based Cyber-Physical Systems.” 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin, 2016.","havard":"M. Elattar, V. Wendt, A. Neumann, J. Jasperneite, Potential of Multipath Communications to Improve Communications Reliability for Internet-based Cyber-physical Systems, in: 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin, 2016.","ufg":"Elattar, Mohammad et. al. (2016): Potential of Multipath Communications to Improve Communications Reliability for Internet-based Cyber-physical Systems, in: 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016).","apa":"Elattar, M., Wendt, V., Neumann, A., & Jasperneite, J. (2016). Potential of Multipath Communications to Improve Communications Reliability for Internet-based Cyber-physical Systems. In 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016). Berlin.","chicago":"Elattar, Mohammad, Verena Wendt, Arne Neumann, and Jürgen Jasperneite. “Potential of Multipath Communications to Improve Communications Reliability for Internet-Based Cyber-Physical Systems.” In 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016). Berlin, 2016."},"title":"Potential of Multipath Communications to Improve Communications Reliability for Internet-based Cyber-physical Systems"},{"date_updated":"2023-03-15T13:49:56Z","user_id":"68554","date_created":"2021-02-02T13:39:58Z","type":"conference","publication":"21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016)","language":[{"iso":"eng"}],"place":"Berlin","_id":"4868","citation":{"chicago-de":"Flatt, Holger, Sebastian Schriegel, Henning Trsek, Heiko Adamczyk und Jürgen Jasperneite. 2016. Analysis of the Cyber-Security of Industry 4.0 Technologies based on RAMI 4.0 and Identification of Requirements. In: 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016). Berlin.","din1505-2-1":"Flatt, Holger ; Schriegel, Sebastian ; Trsek, Henning ; Adamczyk, Heiko ; Jasperneite, Jürgen: Analysis of the Cyber-Security of Industry 4.0 Technologies based on RAMI 4.0 and Identification of Requirements. In: 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016). Berlin, 2016","short":"H. Flatt, S. Schriegel, H. Trsek, H. Adamczyk, J. Jasperneite, in: 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin, 2016.","mla":"Flatt, Holger, et al. “Analysis of the Cyber-Security of Industry 4.0 Technologies Based on RAMI 4.0 and Identification of Requirements.” 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), 2016.","havard":"H. Flatt, S. Schriegel, H. Trsek, H. Adamczyk, J. Jasperneite, Analysis of the Cyber-Security of Industry 4.0 Technologies based on RAMI 4.0 and Identification of Requirements, in: 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin, 2016.","bjps":"Flatt H et al. (2016) Analysis of the Cyber-Security of Industry 4.0 Technologies Based on RAMI 4.0 and Identification of Requirements. 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016). Berlin.","ufg":"Flatt, Holger et. al. (2016): Analysis of the Cyber-Security of Industry 4.0 Technologies based on RAMI 4.0 and Identification of Requirements, in: 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin.","van":"Flatt H, Schriegel S, Trsek H, Adamczyk H, Jasperneite J. Analysis of the Cyber-Security of Industry 4.0 Technologies based on RAMI 4.0 and Identification of Requirements. In: 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016). Berlin; 2016.","chicago":"Flatt, Holger, Sebastian Schriegel, Henning Trsek, Heiko Adamczyk, and Jürgen Jasperneite. “Analysis of the Cyber-Security of Industry 4.0 Technologies Based on RAMI 4.0 and Identification of Requirements.” In 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016). Berlin, 2016.","apa":"Flatt, H., Schriegel, S., Trsek, H., Adamczyk, H., & Jasperneite, J. (2016). Analysis of the Cyber-Security of Industry 4.0 Technologies based on RAMI 4.0 and Identification of Requirements. In 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016). Berlin.","ama":"Flatt H, Schriegel S, Trsek H, Adamczyk H, Jasperneite J. Analysis of the Cyber-Security of Industry 4.0 Technologies based on RAMI 4.0 and Identification of Requirements. In: 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016). Berlin; 2016.","ieee":"H. Flatt, S. Schriegel, H. Trsek, H. Adamczyk, and J. Jasperneite, “Analysis of the Cyber-Security of Industry 4.0 Technologies based on RAMI 4.0 and Identification of Requirements,” in 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), 2016."},"title":"Analysis of the Cyber-Security of Industry 4.0 Technologies based on RAMI 4.0 and Identification of Requirements","status":"public","department":[{"_id":"DEP5023"}],"author":[{"full_name":"Flatt, Holger","last_name":"Flatt","id":"58494","first_name":"Holger"},{"full_name":"Schriegel, Sebastian","last_name":"Schriegel","first_name":"Sebastian"},{"first_name":"Henning","full_name":"Trsek, Henning","last_name":"Trsek","id":"1486"},{"last_name":"Adamczyk","full_name":"Adamczyk, Heiko","first_name":"Heiko"},{"first_name":"Jürgen","id":"1899","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite"}],"year":2016},{"author":[{"full_name":"Flatt, Holger","id":"58494","first_name":"Holger","last_name":"Flatt"},{"full_name":"Schriegel, Sebastian","first_name":"Sebastian","last_name":"Schriegel"},{"full_name":"Trsek, Henning","last_name":"Trsek","id":"1486","first_name":"Henning"},{"full_name":"Adamczyk, Heiko","last_name":"Adamczyk","first_name":"Heiko"},{"first_name":"Jürgen","id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen"}],"year":2016,"department":[{"_id":"DEP5023"}],"abstract":[{"text":"Jede Steigerung der Digitalisierung, Informationstransparenz und Standardisierung macht Produktionsanlagen angreifbarer. In diesem Beitrag wird am Beispiel einer Cloud-basierten Produktionsüberwachung das Vorgehensmodell einer Cybersicherheitsanalyse anhand des Referenzarchitekturmodells Industrie-4.0 (RAMI 4.0) und der Richtlinie VDI/VDE 2182 gezeigt. Das Vorgehen hilft dabei, den Bedarf an Schutzmaßnahmen für spezifische Applikationen zu identifizieren und ermöglicht die risikobasierte Auswahl von Gegenmaßnahmen zur Absicherung.","lang":"eng"}],"status":"public","title":"Industrie 4.0 IT-Sicherheit","citation":{"chicago":"Flatt, Holger, Sebastian Schriegel, Henning Trsek, Heiko Adamczyk, and Jürgen Jasperneite. “Industrie 4.0 IT-Sicherheit.” In atp edition, 2016.","apa":"Flatt, H., Schriegel, S., Trsek, H., Adamczyk, H., & Jasperneite, J. (2016). Industrie 4.0 IT-Sicherheit. In atp edition.","bjps":"Flatt H et al. (2016) Industrie 4.0 IT-Sicherheit. atp edition.","mla":"Flatt, Holger, et al. “Industrie 4.0 IT-Sicherheit.” atp edition, 2016.","havard":"H. Flatt, S. Schriegel, H. Trsek, H. Adamczyk, J. Jasperneite, Industrie 4.0 IT-Sicherheit, in: atp edition, 2016.","ufg":"Flatt, Holger et. al. (2016): Industrie 4.0 IT-Sicherheit, in: atp edition.","van":"Flatt H, Schriegel S, Trsek H, Adamczyk H, Jasperneite J. Industrie 4.0 IT-Sicherheit. In: atp edition. 2016.","chicago-de":"Flatt, Holger, Sebastian Schriegel, Henning Trsek, Heiko Adamczyk und Jürgen Jasperneite. 2016. Industrie 4.0 IT-Sicherheit. In: atp edition.","din1505-2-1":"Flatt, Holger ; Schriegel, Sebastian ; Trsek, Henning ; Adamczyk, Heiko ; Jasperneite, Jürgen: Industrie 4.0 IT-Sicherheit. In: atp edition, 2016","short":"H. Flatt, S. Schriegel, H. Trsek, H. Adamczyk, J. Jasperneite, in: atp edition, 2016.","ieee":"H. Flatt, S. Schriegel, H. Trsek, H. Adamczyk, and J. Jasperneite, “Industrie 4.0 IT-Sicherheit,” in atp edition, 2016.","ama":"Flatt H, Schriegel S, Trsek H, Adamczyk H, Jasperneite J. Industrie 4.0 IT-Sicherheit. In: atp edition. ; 2016."},"language":[{"iso":"ger"}],"_id":"4869","publication":"atp edition","type":"conference","date_created":"2021-02-02T13:41:02Z","user_id":"68554","date_updated":"2023-03-15T13:49:56Z"},{"date_created":"2021-02-02T13:45:50Z","type":"report_science","user_id":"68554","date_updated":"2023-03-15T13:49:56Z","oa":"1","place":"Berlin","language":[{"iso":"ger"}],"_id":"4873","doi":"10.13140/RG.2.1.4440.2805","title":"Industrie 4.0 Aspekte der Forschungsroadmap in den Anwendungsszenarien","citation":{"chicago":"Grotepass, Jürgen, Jürgen Jasperneite, Ernst-Joachim Steffens, Fabian Schmidt, Reiner Anderl, Klaus Bauer, Bernhard Diegner, et al. Industrie 4.0 Aspekte der Forschungsroadmap in den Anwendungsszenarien. Berlin: Bundesministerium für Wirtschaft und Energie, 2016. https://doi.org/10.13140/RG.2.1.4440.2805.","apa":"Grotepass, J., Jasperneite, J., Steffens, E.-J., Schmidt, F., Anderl, R., Bauer, K., … Zeidler, C. (2016). Industrie 4.0 Aspekte der Forschungsroadmap in den Anwendungsszenarien. Berlin: Bundesministerium für Wirtschaft und Energie. https://doi.org/10.13140/RG.2.1.4440.2805","ieee":"J. Grotepass et al., Industrie 4.0 Aspekte der Forschungsroadmap in den Anwendungsszenarien. Berlin: Bundesministerium für Wirtschaft und Energie, 2016.","ufg":"Grotepass, Jürgen et. al. (2016): Industrie 4.0 Aspekte der Forschungsroadmap in den Anwendungsszenarien, Berlin.","mla":"Grotepass, Jürgen, et al. Industrie 4.0 Aspekte der Forschungsroadmap in den Anwendungsszenarien. Bundesministerium für Wirtschaft und Energie, 2016, doi:10.13140/RG.2.1.4440.2805.","havard":"J. Grotepass, J. Jasperneite, E.-J. Steffens, F. Schmidt, R. Anderl, K. Bauer, B. Diegner, J. Diemer, A. Fay, J. Fritz, D. Göricke, C. Hilger, J. Kalhoff, U. Kubach, U. Löwen, G. Menges, J.S. Michels, W. Münch, H. Preiß, O. Reus, R. Schmolze-Krahn, E.-L. Steffens, T. Stiedl, M. ten Hompel, C. Zeidler, Industrie 4.0 Aspekte der Forschungsroadmap in den Anwendungsszenarien, Bundesministerium für Wirtschaft und Energie, Berlin, 2016.","bjps":"Grotepass J et al. (2016) Industrie 4.0 Aspekte der Forschungsroadmap in den Anwendungsszenarien. Berlin: Bundesministerium für Wirtschaft und Energie.","van":"Grotepass J, Jasperneite J, Steffens E-J, Schmidt F, Anderl R, Bauer K, et al. Industrie 4.0 Aspekte der Forschungsroadmap in den Anwendungsszenarien. Berlin: Bundesministerium für Wirtschaft und Energie; 2016.","ama":"Grotepass J, Jasperneite J, Steffens E-J, et al. Industrie 4.0 Aspekte der Forschungsroadmap in den Anwendungsszenarien. Berlin: Bundesministerium für Wirtschaft und Energie; 2016. doi:10.13140/RG.2.1.4440.2805","chicago-de":"Grotepass, Jürgen, Jürgen Jasperneite, Ernst-Joachim Steffens, Fabian Schmidt, Reiner Anderl, Klaus Bauer, Bernhard Diegner, u. a. 2016. Industrie 4.0 Aspekte der Forschungsroadmap in den Anwendungsszenarien. Berlin: Bundesministerium für Wirtschaft und Energie. doi:10.13140/RG.2.1.4440.2805, .","din1505-2-1":"Grotepass, Jürgen ; Jasperneite, Jürgen ; Steffens, Ernst-Joachim ; Schmidt, Fabian ; Anderl, Reiner ; Bauer, Klaus ; Diegner, Bernhard ; Diemer, Johannes ; u. a.: Industrie 4.0 Aspekte der Forschungsroadmap in den Anwendungsszenarien. Berlin : Bundesministerium für Wirtschaft und Energie, 2016","short":"J. Grotepass, J. Jasperneite, E.-J. Steffens, F. Schmidt, R. Anderl, K. Bauer, B. Diegner, J. Diemer, A. Fay, J. Fritz, D. Göricke, C. Hilger, J. Kalhoff, U. Kubach, U. Löwen, G. Menges, J.S. Michels, W. Münch, H. Preiß, O. Reus, R. Schmolze-Krahn, E.-L. Steffens, T. Stiedl, M. ten Hompel, C. Zeidler, Industrie 4.0 Aspekte der Forschungsroadmap in den Anwendungsszenarien, Bundesministerium für Wirtschaft und Energie, Berlin, 2016."},"publication_status":"published","main_file_link":[{"open_access":"1","url":"https://www.researchgate.net/publication/303913163_Industrie_40_Aspekte_der_Forschungsroadmap_in_den_Anwendungsszenarien"}],"author":[{"first_name":"Jürgen","full_name":"Grotepass, Jürgen","last_name":"Grotepass"},{"first_name":"Jürgen","id":"1899","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite"},{"full_name":"Steffens, Ernst-Joachim","last_name":"Steffens","first_name":"Ernst-Joachim"},{"full_name":"Schmidt, Fabian","last_name":"Schmidt","first_name":"Fabian"},{"last_name":"Anderl","first_name":"Reiner ","full_name":"Anderl, Reiner "},{"first_name":"Klaus","full_name":"Bauer, Klaus","last_name":"Bauer"},{"full_name":"Diegner, Bernhard","first_name":"Bernhard","last_name":"Diegner"},{"first_name":"Johannes","last_name":"Diemer","full_name":"Diemer, Johannes"},{"last_name":"Fay","first_name":"Alexander","full_name":"Fay, Alexander"},{"first_name":"Jessica","last_name":"Fritz","full_name":"Fritz, Jessica"},{"full_name":"Göricke, Dietmar","last_name":"Göricke","first_name":"Dietmar"},{"full_name":"Hilger, Claus","last_name":"Hilger","first_name":"Claus"},{"full_name":"Kalhoff, Johannes","last_name":"Kalhoff","first_name":"Johannes"},{"first_name":"Uwe","full_name":"Kubach, Uwe","last_name":"Kubach"},{"last_name":"Löwen","first_name":"Ulrich","full_name":"Löwen, Ulrich"},{"last_name":"Menges","full_name":"Menges, Georg","first_name":"Georg"},{"first_name":"Jan Stefan","full_name":"Michels, Jan Stefan","last_name":"Michels"},{"last_name":"Münch","first_name":"Wolfram","full_name":"Münch, Wolfram"},{"first_name":"Helena","last_name":"Preiß","full_name":"Preiß, Helena"},{"first_name":"Olaf","full_name":"Reus, Olaf","last_name":"Reus"},{"full_name":"Schmolze-Krahn, Raimund ","first_name":"Raimund ","last_name":"Schmolze-Krahn"},{"first_name":"Ernst-Loachim","last_name":"Steffens","full_name":"Steffens, Ernst-Loachim"},{"first_name":"Thomas ","last_name":"Stiedl","full_name":"Stiedl, Thomas "},{"last_name":"ten Hompel","full_name":"ten Hompel, Michael","first_name":"Michael"},{"first_name":"Christian","full_name":"Zeidler, Christian","last_name":"Zeidler"}],"year":2016,"department":[{"_id":"DEP5023"}],"status":"public","publisher":"Bundesministerium für Wirtschaft und Energie"},{"language":[{"iso":"ger"}],"_id":"4878","type":"journal_article","date_created":"2021-02-02T13:57:00Z","publication":"Kongress Industrie 4.0 der Südwestfälischen Industrie- und Handelskammer zu Hagen (eingeladener Vortrag)","date_updated":"2023-03-15T13:49:56Z","user_id":"68554","department":[{"_id":"DEP5023"}],"year":2016,"author":[{"first_name":"Jürgen","full_name":"Jasperneite, Jürgen","id":"1899","last_name":"Jasperneite"}],"status":"public","title":"Industrie 4.0 – Lösungen für den Mittelstand aus dem Spitzencluster it’s OWL","citation":{"havard":"J. Jasperneite, Industrie 4.0 – Lösungen für den Mittelstand aus dem Spitzencluster it’s OWL, Kongress Industrie 4.0 der Südwestfälischen Industrie- und Handelskammer zu Hagen (eingeladener Vortrag). (2016).","bjps":"Jasperneite J (2016) Industrie 4.0 – Lösungen für den Mittelstand aus dem Spitzencluster it’s OWL. Kongress Industrie 4.0 der Südwestfälischen Industrie- und Handelskammer zu Hagen (eingeladener Vortrag).","mla":"Jasperneite, Jürgen. “Industrie 4.0 – Lösungen für den Mittelstand aus dem Spitzencluster it’s OWL.” Kongress Industrie 4.0 der Südwestfälischen Industrie- und Handelskammer zu Hagen (eingeladener Vortrag), 2016.","ufg":"Jasperneite, Jürgen (2016): Industrie 4.0 – Lösungen für den Mittelstand aus dem Spitzencluster it’s OWL, in: Kongress Industrie 4.0 der Südwestfälischen Industrie- und Handelskammer zu Hagen (eingeladener Vortrag).","van":"Jasperneite J. Industrie 4.0 – Lösungen für den Mittelstand aus dem Spitzencluster it’s OWL. Kongress Industrie 40 der Südwestfälischen Industrie- und Handelskammer zu Hagen (eingeladener Vortrag). 2016;","chicago":"Jasperneite, Jürgen. “Industrie 4.0 – Lösungen für den Mittelstand aus dem Spitzencluster it’s OWL.” Kongress Industrie 4.0 der Südwestfälischen Industrie- und Handelskammer zu Hagen (eingeladener Vortrag), 2016.","apa":"Jasperneite, J. (2016). Industrie 4.0 – Lösungen für den Mittelstand aus dem Spitzencluster it’s OWL. Kongress Industrie 4.0 der Südwestfälischen Industrie- und Handelskammer zu Hagen (eingeladener Vortrag).","chicago-de":"Jasperneite, Jürgen. 2016. Industrie 4.0 – Lösungen für den Mittelstand aus dem Spitzencluster it’s OWL. Kongress Industrie 4.0 der Südwestfälischen Industrie- und Handelskammer zu Hagen (eingeladener Vortrag).","din1505-2-1":"Jasperneite, Jürgen: Industrie 4.0 – Lösungen für den Mittelstand aus dem Spitzencluster it’s OWL. In: Kongress Industrie 4.0 der Südwestfälischen Industrie- und Handelskammer zu Hagen (eingeladener Vortrag) (2016)","short":"J. Jasperneite, Kongress Industrie 4.0 der Südwestfälischen Industrie- und Handelskammer zu Hagen (eingeladener Vortrag) (2016).","ama":"Jasperneite J. Industrie 4.0 – Lösungen für den Mittelstand aus dem Spitzencluster it’s OWL. Kongress Industrie 40 der Südwestfälischen Industrie- und Handelskammer zu Hagen (eingeladener Vortrag). 2016.","ieee":"J. Jasperneite, “Industrie 4.0 – Lösungen für den Mittelstand aus dem Spitzencluster it’s OWL,” Kongress Industrie 4.0 der Südwestfälischen Industrie- und Handelskammer zu Hagen (eingeladener Vortrag), 2016."}},{"status":"public","author":[{"full_name":"Flatt, Holger","last_name":"Flatt","id":"58494","first_name":"Holger"},{"full_name":"Schriegel, Sebastian","first_name":"Sebastian","last_name":"Schriegel"},{"full_name":"Trsek, Henning","last_name":"Trsek","id":"1486","first_name":"Henning"},{"last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"}],"year":2016,"department":[{"_id":"DEP5023"}],"abstract":[{"lang":"eng","text":"Die vollständige Digitalisierung der industriellen Produktion und die entstehende neue Qualität an Informationstransparenz sind die Grundlage für die Mehrwerte Effektivität, Qualität und Individualität. Diesem Mehrwertpotential stehen Gefahren der Cyber-Sicherheit entgegen: Jede Steigerung der Digitalisierung, Informationstransparenz und Standardisierung macht Produktionsanlagen angreifbarer. Das Referenz Architektur Model Industrie 4.0 (RAMI 4.0) ermöglicht die Abbildung aller Instanzen einer Industrie 4.0-Anwendung über den gesamten Lebenszyklus und kann so bei der Analyse der Cyber-Sicherheit von Industrie 4.0-Technologien unterstützen. In diesem Beitrag wird am Beispiel einer Cloud-basierten Produktionsüberwachung das Vorgehensmodel einer Cyber-Sicherheitsanalyse anhand RAMI 4.0 und der Richtlinie VDI/VDE 2182 gezeigt. Das Vorgehen unterstützt bei der Identifikation von Schutzbedarfen spezifischer Applikationen und ermöglicht die Risiko-basierte Auswahl von Gegenmaßnahmen zur Absicherung."}],"citation":{"chicago-de":"Flatt, Holger, Sebastian Schriegel, Henning Trsek und Jürgen Jasperneite. 2016. Analyse der Cyber-Sicherheit von Industrie 4.0-Technologien auf Basis des RAMI 4.0 und Identifikation von Lösungsbedarfen. In: Automation 2016. Baden-Baden.","din1505-2-1":"Flatt, Holger ; Schriegel, Sebastian ; Trsek, Henning ; Jasperneite, Jürgen: Analyse der Cyber-Sicherheit von Industrie 4.0-Technologien auf Basis des RAMI 4.0 und Identifikation von Lösungsbedarfen. In: Automation 2016. Baden-Baden, 2016","short":"H. Flatt, S. Schriegel, H. Trsek, J. Jasperneite, in: Automation 2016, Baden-Baden, 2016.","chicago":"Flatt, Holger, Sebastian Schriegel, Henning Trsek, and Jürgen Jasperneite. “Analyse Der Cyber-Sicherheit von Industrie 4.0-Technologien Auf Basis Des RAMI 4.0 Und Identifikation von Lösungsbedarfen.” In Automation 2016. Baden-Baden, 2016.","apa":"Flatt, H., Schriegel, S., Trsek, H., & Jasperneite, J. (2016). Analyse der Cyber-Sicherheit von Industrie 4.0-Technologien auf Basis des RAMI 4.0 und Identifikation von Lösungsbedarfen. In Automation 2016. Baden-Baden.","ufg":"Flatt, Holger et. al. (2016): Analyse der Cyber-Sicherheit von Industrie 4.0-Technologien auf Basis des RAMI 4.0 und Identifikation von Lösungsbedarfen, in: Automation 2016, Baden-Baden.","havard":"H. Flatt, S. Schriegel, H. Trsek, J. Jasperneite, Analyse der Cyber-Sicherheit von Industrie 4.0-Technologien auf Basis des RAMI 4.0 und Identifikation von Lösungsbedarfen, in: Automation 2016, Baden-Baden, 2016.","mla":"Flatt, Holger, et al. “Analyse Der Cyber-Sicherheit von Industrie 4.0-Technologien Auf Basis Des RAMI 4.0 Und Identifikation von Lösungsbedarfen.” Automation 2016, 2016.","bjps":"Flatt H et al. (2016) Analyse Der Cyber-Sicherheit von Industrie 4.0-Technologien Auf Basis Des RAMI 4.0 Und Identifikation von Lösungsbedarfen. Automation 2016. Baden-Baden.","van":"Flatt H, Schriegel S, Trsek H, Jasperneite J. Analyse der Cyber-Sicherheit von Industrie 4.0-Technologien auf Basis des RAMI 4.0 und Identifikation von Lösungsbedarfen. In: Automation 2016. Baden-Baden; 2016.","ieee":"H. Flatt, S. Schriegel, H. Trsek, and J. Jasperneite, “Analyse der Cyber-Sicherheit von Industrie 4.0-Technologien auf Basis des RAMI 4.0 und Identifikation von Lösungsbedarfen,” in Automation 2016, 2016.","ama":"Flatt H, Schriegel S, Trsek H, Jasperneite J. Analyse der Cyber-Sicherheit von Industrie 4.0-Technologien auf Basis des RAMI 4.0 und Identifikation von Lösungsbedarfen. In: Automation 2016. Baden-Baden; 2016."},"title":"Analyse der Cyber-Sicherheit von Industrie 4.0-Technologien auf Basis des RAMI 4.0 und Identifikation von Lösungsbedarfen","place":"Baden-Baden","language":[{"iso":"eng"}],"_id":"4879","user_id":"68554","date_updated":"2023-03-15T13:49:56Z","publication":"Automation 2016","date_created":"2021-02-02T13:57:56Z","type":"conference"},{"user_id":"68554","date_updated":"2023-03-15T13:49:56Z","publication":"12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, Portugal","date_created":"2021-02-02T13:58:55Z","type":"conference","place":"Aveiro, Portugal","language":[{"iso":"eng"}],"_id":"4881","citation":{"short":"D. Henneke, L. Wisniewski, J. Jasperneite, in: 12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, Portugal, Aveiro, Portugal, 2016.","chicago-de":"Henneke, Dominik, Lukasz Wisniewski und Jürgen Jasperneite. 2016. Analysis of Realizing a Future Industrial Network by Means of Software-Defined Networking (SDN). In: 12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, Portugal. Aveiro, Portugal.","din1505-2-1":"Henneke, Dominik ; Wisniewski, Lukasz ; Jasperneite, Jürgen: Analysis of Realizing a Future Industrial Network by Means of Software-Defined Networking (SDN). In: 12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, Portugal. Aveiro, Portugal, 2016","apa":"Henneke, D., Wisniewski, L., & Jasperneite, J. (2016). Analysis of Realizing a Future Industrial Network by Means of Software-Defined Networking (SDN). In 12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, Portugal. Aveiro, Portugal.","chicago":"Henneke, Dominik, Lukasz Wisniewski, and Jürgen Jasperneite. “Analysis of Realizing a Future Industrial Network by Means of Software-Defined Networking (SDN).” In 12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, Portugal. Aveiro, Portugal, 2016.","van":"Henneke D, Wisniewski L, Jasperneite J. Analysis of Realizing a Future Industrial Network by Means of Software-Defined Networking (SDN). In: 12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, Portugal. Aveiro, Portugal; 2016.","ufg":"Henneke, Dominik et. al. (2016): Analysis of Realizing a Future Industrial Network by Means of Software-Defined Networking (SDN), in: 12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, Portugal, Aveiro, Portugal.","havard":"D. Henneke, L. Wisniewski, J. Jasperneite, Analysis of Realizing a Future Industrial Network by Means of Software-Defined Networking (SDN), in: 12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, Portugal, Aveiro, Portugal, 2016.","bjps":"Henneke D, Wisniewski L and Jasperneite J (2016) Analysis of Realizing a Future Industrial Network by Means of Software-Defined Networking (SDN). 12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, Portugal. Aveiro, Portugal.","mla":"Henneke, Dominik, et al. “Analysis of Realizing a Future Industrial Network by Means of Software-Defined Networking (SDN).” 12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, Portugal, 2016.","ieee":"D. Henneke, L. Wisniewski, and J. Jasperneite, “Analysis of Realizing a Future Industrial Network by Means of Software-Defined Networking (SDN),” in 12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, Portugal, 2016.","ama":"Henneke D, Wisniewski L, Jasperneite J. Analysis of Realizing a Future Industrial Network by Means of Software-Defined Networking (SDN). In: 12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, Portugal. Aveiro, Portugal; 2016."},"title":"Analysis of Realizing a Future Industrial Network by Means of Software-Defined Networking (SDN)","status":"public","author":[{"first_name":"Dominik","last_name":"Henneke","id":"52007","full_name":"Henneke, Dominik"},{"first_name":"Lukasz","last_name":"Wisniewski","id":"1710","full_name":"Wisniewski, Lukasz"},{"full_name":"Jasperneite, Jürgen","id":"1899","first_name":"Jürgen","last_name":"Jasperneite"}],"year":2016,"department":[{"_id":"DEP5023"}]},{"title":"Scheduling of PROFINET IRT Communication in Redundant Network Topologies","citation":{"din1505-2-1":"Wisniewski, Lukasz ; Wendt, Verena ; Schumacher, Markus ; Jasperneite, Jürgen ; Diedrich, Christian: Scheduling of PROFINET IRT Communication in Redundant Network Topologies. In: 12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, Portugal, 2016","chicago-de":"Wisniewski, Lukasz, Verena Wendt, Markus Schumacher, Jürgen Jasperneite und Christian Diedrich. 2016. Scheduling of PROFINET IRT Communication in Redundant Network Topologies. In: 12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, Portugal.","short":"L. Wisniewski, V. Wendt, M. Schumacher, J. Jasperneite, C. Diedrich, in: 12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, Portugal, 2016.","chicago":"Wisniewski, Lukasz, Verena Wendt, Markus Schumacher, Jürgen Jasperneite, and Christian Diedrich. “Scheduling of PROFINET IRT Communication in Redundant Network Topologies.” In 12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, Portugal, 2016.","apa":"Wisniewski, L., Wendt, V., Schumacher, M., Jasperneite, J., & Diedrich, C. (2016). Scheduling of PROFINET IRT Communication in Redundant Network Topologies. In 12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, Portugal.","ieee":"L. Wisniewski, V. Wendt, M. Schumacher, J. Jasperneite, and C. Diedrich, “Scheduling of PROFINET IRT Communication in Redundant Network Topologies,” in 12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, Portugal, 2016.","ufg":"Wisniewski, Lukasz et. al. (2016): Scheduling of PROFINET IRT Communication in Redundant Network Topologies, in: 12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, Portugal.","havard":"L. Wisniewski, V. Wendt, M. Schumacher, J. Jasperneite, C. Diedrich, Scheduling of PROFINET IRT Communication in Redundant Network Topologies, in: 12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, Portugal, 2016.","mla":"Wisniewski, Lukasz, et al. “Scheduling of PROFINET IRT Communication in Redundant Network Topologies.” 12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, Portugal, 2016.","bjps":"Wisniewski L et al. (2016) Scheduling of PROFINET IRT Communication in Redundant Network Topologies. 12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, Portugal.","van":"Wisniewski L, Wendt V, Schumacher M, Jasperneite J, Diedrich C. Scheduling of PROFINET IRT Communication in Redundant Network Topologies. In: 12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, Portugal. 2016.","ama":"Wisniewski L, Wendt V, Schumacher M, Jasperneite J, Diedrich C. Scheduling of PROFINET IRT Communication in Redundant Network Topologies. In: 12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, Portugal. ; 2016."},"year":2016,"author":[{"last_name":"Wisniewski","first_name":"Lukasz","full_name":"Wisniewski, Lukasz","id":"1710"},{"full_name":"Wendt, Verena","first_name":"Verena","last_name":"Wendt"},{"first_name":"Markus","full_name":"Schumacher, Markus","last_name":"Schumacher"},{"first_name":"Jürgen","last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen"},{"full_name":"Diedrich, Christian","first_name":"Christian","last_name":"Diedrich"}],"department":[{"_id":"DEP5023"}],"abstract":[{"lang":"eng","text":"Scheduling of time triggered communication systems belongs to the well known hard mathematical optimization problems. This paper tackles the communication scheduling problem in redundant network topologies, where the real-time process data has to be duplicated and sent on two different paths to its destination. This paper proposes an algorithm that is able to find a feasible schedule in a short time, while keeping the makespan of the schedule in average 10% shorter than the makespan of the schedule produced by a commercial tool, which is the current benchmark."}],"status":"public","publication":"12th IEEE World Conference on Factory Communication Systems (WFCS 2016), Aveiro, Portugal","type":"conference","date_created":"2021-02-02T14:00:32Z","user_id":"68554","date_updated":"2023-03-15T13:49:56Z","language":[{"iso":"eng"}],"_id":"4883"},{"_id":"4885","language":[{"iso":"eng"}],"user_id":"68554","date_updated":"2023-03-15T13:49:56Z","publication":"Stanford University (eingeladener Vortrag), Kalifornien, USA, März 2016","type":"conference","date_created":"2021-02-02T14:03:10Z","status":"public","year":2016,"author":[{"id":"1899","first_name":"Jürgen","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen"}],"department":[{"_id":"DEP5023"}],"citation":{"ama":"Jasperneite J. Smart Manufacturing - Status and Open Issues. In: Stanford University (Eingeladener Vortrag), Kalifornien, USA, März 2016. ; 2016.","van":"Jasperneite J. Smart Manufacturing - Status and Open Issues. In: Stanford University (eingeladener Vortrag), Kalifornien, USA, März 2016. 2016.","bjps":"Jasperneite J (2016) Smart Manufacturing - Status and Open Issues. Stanford University (Eingeladener Vortrag), Kalifornien, USA, März 2016.","havard":"J. Jasperneite, Smart Manufacturing - Status and Open Issues, in: Stanford University (Eingeladener Vortrag), Kalifornien, USA, März 2016, 2016.","mla":"Jasperneite, Jürgen. “Smart Manufacturing - Status and Open Issues.” Stanford University (Eingeladener Vortrag), Kalifornien, USA, März 2016, 2016.","ufg":"Jasperneite, Jürgen (2016): Smart Manufacturing - Status and Open Issues, in: Stanford University (eingeladener Vortrag), Kalifornien, USA, März 2016.","ieee":"J. Jasperneite, “Smart Manufacturing - Status and Open Issues,” in Stanford University (eingeladener Vortrag), Kalifornien, USA, März 2016, 2016.","apa":"Jasperneite, J. (2016). Smart Manufacturing - Status and Open Issues. In Stanford University (eingeladener Vortrag), Kalifornien, USA, März 2016.","chicago":"Jasperneite, Jürgen. “Smart Manufacturing - Status and Open Issues.” In Stanford University (Eingeladener Vortrag), Kalifornien, USA, März 2016, 2016.","short":"J. Jasperneite, in: Stanford University (Eingeladener Vortrag), Kalifornien, USA, März 2016, 2016.","chicago-de":"Jasperneite, Jürgen. 2016. Smart Manufacturing - Status and Open Issues. In: Stanford University (eingeladener Vortrag), Kalifornien, USA, März 2016.","din1505-2-1":"Jasperneite, Jürgen: Smart Manufacturing - Status and Open Issues. In: Stanford University (eingeladener Vortrag), Kalifornien, USA, März 2016, 2016"},"title":"Smart Manufacturing - Status and Open Issues"},{"title":"Intelligent Systems for the Factory of the Future","citation":{"van":"Jasperneite J. Intelligent Systems for the Factory of the Future. In: Palo Alto Research Center (PARC, eingeladener Vortrag), Palo Alto, Kalifornien, USA, März 2016. 2016.","mla":"Jasperneite, Jürgen. “Intelligent Systems for the Factory of the Future.” Palo Alto Research Center (PARC, Eingeladener Vortrag), Palo Alto, Kalifornien, USA, März 2016, 2016.","havard":"J. Jasperneite, Intelligent Systems for the Factory of the Future, in: Palo Alto Research Center (PARC, Eingeladener Vortrag), Palo Alto, Kalifornien, USA, März 2016, 2016.","bjps":"Jasperneite J (2016) Intelligent Systems for the Factory of the Future. Palo Alto Research Center (PARC, Eingeladener Vortrag), Palo Alto, Kalifornien, USA, März 2016.","ufg":"Jasperneite, Jürgen (2016): Intelligent Systems for the Factory of the Future, in: Palo Alto Research Center (PARC, eingeladener Vortrag), Palo Alto, Kalifornien, USA, März 2016.","apa":"Jasperneite, J. (2016). Intelligent Systems for the Factory of the Future. In Palo Alto Research Center (PARC, eingeladener Vortrag), Palo Alto, Kalifornien, USA, März 2016.","chicago":"Jasperneite, Jürgen. “Intelligent Systems for the Factory of the Future.” In Palo Alto Research Center (PARC, Eingeladener Vortrag), Palo Alto, Kalifornien, USA, März 2016, 2016.","short":"J. Jasperneite, in: Palo Alto Research Center (PARC, Eingeladener Vortrag), Palo Alto, Kalifornien, USA, März 2016, 2016.","chicago-de":"Jasperneite, Jürgen. 2016. Intelligent Systems for the Factory of the Future. In: Palo Alto Research Center (PARC, eingeladener Vortrag), Palo Alto, Kalifornien, USA, März 2016.","din1505-2-1":"Jasperneite, Jürgen: Intelligent Systems for the Factory of the Future. In: Palo Alto Research Center (PARC, eingeladener Vortrag), Palo Alto, Kalifornien, USA, März 2016, 2016","ama":"Jasperneite J. Intelligent Systems for the Factory of the Future. In: Palo Alto Research Center (PARC, Eingeladener Vortrag), Palo Alto, Kalifornien, USA, März 2016. ; 2016.","ieee":"J. Jasperneite, “Intelligent Systems for the Factory of the Future,” in Palo Alto Research Center (PARC, eingeladener Vortrag), Palo Alto, Kalifornien, USA, März 2016, 2016."},"department":[{"_id":"DEP5023"}],"year":2016,"author":[{"full_name":"Jasperneite, Jürgen","first_name":"Jürgen","id":"1899","last_name":"Jasperneite"}],"status":"public","type":"conference","date_created":"2021-02-02T14:04:00Z","publication":"Palo Alto Research Center (PARC, eingeladener Vortrag), Palo Alto, Kalifornien, USA, März 2016","date_updated":"2023-03-15T13:49:56Z","user_id":"68554","_id":"4886","language":[{"iso":"eng"}]},{"place":"Berlin, Heidelberg","language":[{"iso":"ger"}],"_id":"4888","doi":"10.1007/978-3-662-53248-5_50","user_id":"68554","date_updated":"2023-03-15T13:49:56Z","intvolume":" 2","publication":"Handbuch Industrie 4.0 Bd.2","publication_identifier":{"isbn":["9783662532478","9783662532485"]},"date_created":"2021-02-02T14:06:24Z","type":"book_chapter","status":"public","page":"59-71","year":2016,"author":[{"first_name":"Lars","full_name":"Dürkop, Lars","last_name":"Dürkop"},{"full_name":"Jasperneite, Jürgen","id":"1899","last_name":"Jasperneite","first_name":"Jürgen"}],"department":[{"_id":"DEP5023"}],"citation":{"chicago-de":"Dürkop, Lars und Jürgen Jasperneite. 2016. „Plug & Produce“ als Anwendungsfall von Industrie 4.0. In: Handbuch Industrie 4.0 Bd.2, 2:59–71. Berlin, Heidelberg. doi:10.1007/978-3-662-53248-5_50, .","din1505-2-1":"Dürkop, Lars ; Jasperneite, Jürgen: „Plug & Produce“ als Anwendungsfall von Industrie 4.0. In: Handbuch Industrie 4.0 Bd.2. Bd. 2. Berlin, Heidelberg, 2016, S. 59–71","short":"L. Dürkop, J. Jasperneite, in: Handbuch Industrie 4.0 Bd.2, Berlin, Heidelberg, 2016, pp. 59–71.","bjps":"Dürkop L and Jasperneite J (2016) „Plug & Produce“ als Anwendungsfall von Industrie 4.0. Handbuch Industrie 4.0 Bd.2, vol. 2. Berlin, Heidelberg, pp. 59–71.","havard":"L. Dürkop, J. Jasperneite, „Plug & Produce“ als Anwendungsfall von Industrie 4.0, in: Handbuch Industrie 4.0 Bd.2, Berlin, Heidelberg, 2016: pp. 59–71.","mla":"Dürkop, Lars, and Jürgen Jasperneite. “„Plug & Produce“ als Anwendungsfall von Industrie 4.0.” Handbuch Industrie 4.0 Bd.2, vol. 2, 2016, pp. 59–71, doi:10.1007/978-3-662-53248-5_50.","ufg":"Dürkop, Lars/Jasperneite, Jürgen (2016): „Plug & Produce“ als Anwendungsfall von Industrie 4.0, in: Handbuch Industrie 4.0 Bd.2 (= 2), Berlin, Heidelberg, S. 59–71.","ama":"Dürkop L, Jasperneite J. „Plug & Produce“ als Anwendungsfall von Industrie 4.0. In: Handbuch Industrie 4.0 Bd.2. Vol 2. Berlin, Heidelberg; 2016:59-71. doi:10.1007/978-3-662-53248-5_50","van":"Dürkop L, Jasperneite J. „Plug & Produce“ als Anwendungsfall von Industrie 4.0. In: Handbuch Industrie 40 Bd2. Berlin, Heidelberg; 2016. p. 59–71.","chicago":"Dürkop, Lars, and Jürgen Jasperneite. “„Plug & Produce“ als Anwendungsfall von Industrie 4.0.” In Handbuch Industrie 4.0 Bd.2, 2:59–71. Berlin, Heidelberg, 2016. https://doi.org/10.1007/978-3-662-53248-5_50.","ieee":"L. Dürkop and J. Jasperneite, “„Plug & Produce“ als Anwendungsfall von Industrie 4.0,” in Handbuch Industrie 4.0 Bd.2, vol. 2, Berlin, Heidelberg, 2016, pp. 59–71.","apa":"Dürkop, L., & Jasperneite, J. (2016). „Plug & Produce“ als Anwendungsfall von Industrie 4.0. In Handbuch Industrie 4.0 Bd.2 (Vol. 2, pp. 59–71). Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-53248-5_50"},"volume":2,"publication_status":"published","title":"„Plug & Produce“ als Anwendungsfall von Industrie 4.0"},{"status":"public","publisher":"Carl Hanser Verlag","department":[{"_id":"DEP6020"}],"year":2016,"author":[{"id":"56893","full_name":"Nerreter, Wolfgang","first_name":"Wolfgang","last_name":"Nerreter"},{"first_name":"Georg","full_name":"Flegel, Georg","last_name":"Flegel"},{"first_name":"Karl","full_name":"Birnstiel, Karl","last_name":"Birnstiel"},{"last_name":"Borcherding","first_name":"Holger","id":"1693","full_name":"Borcherding, Holger"},{"full_name":"Meier, Uwe","last_name":"Meier","id":"1143","first_name":"Uwe"}],"publication_status":"published","citation":{"van":"Nerreter W, Flegel G, Birnstiel K, Borcherding H, Meier U. Elektrotechnik für Maschinenbau und Mechatronik. 10th ed. München: Carl Hanser Verlag; 2016.","ufg":"Nerreter, Wolfgang et. al. (2016): Elektrotechnik für Maschinenbau und Mechatronik, München, 10.","bjps":"Nerreter W et al. (2016) Elektrotechnik für Maschinenbau und Mechatronik, 10th ed. München: Carl Hanser Verlag.","mla":"Nerreter, Wolfgang, et al. Elektrotechnik für Maschinenbau und Mechatronik. 10th ed., Carl Hanser Verlag, 2016.","havard":"W. Nerreter, G. Flegel, K. Birnstiel, H. Borcherding, U. Meier, Elektrotechnik für Maschinenbau und Mechatronik, 10th ed., Carl Hanser Verlag, München, 2016.","apa":"Nerreter, W., Flegel, G., Birnstiel, K., Borcherding, H., & Meier, U. (2016). Elektrotechnik für Maschinenbau und Mechatronik (10th ed.). München: Carl Hanser Verlag.","chicago":"Nerreter, Wolfgang, Georg Flegel, Karl Birnstiel, Holger Borcherding, and Uwe Meier. Elektrotechnik für Maschinenbau und Mechatronik. 10th ed. München: Carl Hanser Verlag, 2016.","short":"W. Nerreter, G. Flegel, K. Birnstiel, H. Borcherding, U. Meier, Elektrotechnik für Maschinenbau und Mechatronik, 10th ed., Carl Hanser Verlag, München, 2016.","chicago-de":"Nerreter, Wolfgang, Georg Flegel, Karl Birnstiel, Holger Borcherding und Uwe Meier. 2016. Elektrotechnik für Maschinenbau und Mechatronik. 10. Aufl. München: Carl Hanser Verlag.","din1505-2-1":"Nerreter, Wolfgang ; Flegel, Georg ; Birnstiel, Karl ; Borcherding, Holger ; Meier, Uwe: Elektrotechnik für Maschinenbau und Mechatronik. 10. Aufl. München : Carl Hanser Verlag, 2016","ama":"Nerreter W, Flegel G, Birnstiel K, Borcherding H, Meier U. Elektrotechnik für Maschinenbau und Mechatronik. 10th ed. München: Carl Hanser Verlag; 2016.","ieee":"W. Nerreter, G. Flegel, K. Birnstiel, H. Borcherding, and U. Meier, Elektrotechnik für Maschinenbau und Mechatronik, 10th ed. München: Carl Hanser Verlag, 2016."},"title":"Elektrotechnik für Maschinenbau und Mechatronik","language":[{"iso":"ger"}],"place":"München","_id":"4895","date_updated":"2023-03-15T13:49:56Z","user_id":"74004","type":"book","date_created":"2020-12-09T12:09:12Z","publication_identifier":{"isbn":["978-3-446-44496-6"]},"edition":"10"},{"citation":{"short":"G.C. Moniz, C. Quiroga, U. Pottgiesser, Proceedings of the 14th International Docomomo Conference - Adaptive Reuse: The Modern Movement Towards the Future (2016) 830–832.","chicago-de":"Moniz, Goncalo Canto, Carolina Quiroga und Uta Pottgiesser. 2016. Education for reuse. Proceedings of the 14th International Docomomo Conference - Adaptive Reuse: The Modern Movement Towards the Future: 830–832.","din1505-2-1":"Moniz, Goncalo Canto ; Quiroga, Carolina ; Pottgiesser, Uta: Education for reuse. In: Proceedings of the 14th International Docomomo Conference - Adaptive Reuse: The Modern Movement Towards the Future (2016), S. 830–832","apa":"Moniz, G. C., Quiroga, C., & Pottgiesser, U. (2016). Education for reuse. Proceedings of the 14th International Docomomo Conference - Adaptive Reuse: The Modern Movement Towards the Future, 830–832.","chicago":"Moniz, Goncalo Canto, Carolina Quiroga, and Uta Pottgiesser. “Education for Reuse.” Proceedings of the 14th International Docomomo Conference - Adaptive Reuse: The Modern Movement Towards the Future, 2016, 830–32.","van":"Moniz GC, Quiroga C, Pottgiesser U. Education for reuse. Proceedings of the 14th International Docomomo Conference - Adaptive Reuse: The Modern Movement Towards the Future. 2016;830–2.","ufg":"Moniz, Goncalo Canto et. al. (2016): Education for reuse, in: Proceedings of the 14th International Docomomo Conference - Adaptive Reuse: The Modern Movement Towards the Future, S. 830–832.","mla":"Moniz, Goncalo Canto, et al. “Education for Reuse.” Proceedings of the 14th International Docomomo Conference - Adaptive Reuse: The Modern Movement Towards the Future, 2016, pp. 830–32.","havard":"G.C. Moniz, C. Quiroga, U. Pottgiesser, Education for reuse, Proceedings of the 14th International Docomomo Conference - Adaptive Reuse: The Modern Movement Towards the Future. (2016) 830–832.","bjps":"Moniz GC, Quiroga C and Pottgiesser U (2016) Education for Reuse. Proceedings of the 14th International Docomomo Conference - Adaptive Reuse: The Modern Movement Towards the Future 830–832.","ieee":"G. C. Moniz, C. Quiroga, and U. Pottgiesser, “Education for reuse,” Proceedings of the 14th International Docomomo Conference - Adaptive Reuse: The Modern Movement Towards the Future, pp. 830–832, 2016.","ama":"Moniz GC, Quiroga C, Pottgiesser U. Education for reuse. Proceedings of the 14th International Docomomo Conference - Adaptive Reuse: The Modern Movement Towards the Future. 2016:830-832."},"publication_status":"published","title":"Education for reuse","quality_controlled":"1","status":"public","page":"830-832","author":[{"last_name":"Moniz","first_name":"Goncalo Canto","full_name":"Moniz, Goncalo Canto"},{"first_name":"Carolina","full_name":"Quiroga, Carolina","last_name":"Quiroga"},{"first_name":"Uta","full_name":"Pottgiesser, Uta","last_name":"Pottgiesser","id":"27166","orcid":"0000-0002-8594-3168"}],"year":2016,"department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"user_id":"45673","date_updated":"2023-03-15T13:49:58Z","publication":"Proceedings of the 14th International Docomomo Conference - Adaptive Reuse: The Modern Movement Towards the Future","publication_identifier":{"isbn":["978-989996450-1"]},"date_created":"2021-03-03T14:19:59Z","type":"journal_article","_id":"5205","language":[{"iso":"eng"}]},{"language":[{"iso":"eng"}],"place":"Rotterdam","_id":"5206","date_created":"2021-03-03T14:21:24Z","type":"book","publication_identifier":{"isbn":["978-94-6208-291-5 "]},"date_updated":"2023-03-15T13:49:58Z","user_id":"45673","department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"author":[{"first_name":"Ulrich","last_name":"Knaack","full_name":"Knaack, Ulrich","id":"27160"},{"first_name":"Tillman","last_name":"Klein","full_name":"Klein, Tillman"},{"full_name":"Bilow, Marcel","first_name":"Marcel","last_name":"Bilow"},{"orcid":"0000-0002-8594-3168","id":"27166","full_name":"Pottgiesser, Uta","last_name":"Pottgiesser","first_name":"Uta"},{"full_name":"Böke, Jens","first_name":"Jens","last_name":"Böke"},{"last_name":"Ernst","full_name":"Ernst, Maximilian","first_name":"Maximilian","id":"58415"}],"year":2016,"page":"128","status":"public","title":"Imagine 09 : prototyping efn mobile","publication_status":"published","citation":{"van":"Knaack U, Klein T, Bilow M, Pottgiesser U, Böke J, Ernst M. Imagine 09 : prototyping efn mobile. Rotterdam; 2016. 128 p.","ama":"Knaack U, Klein T, Bilow M, Pottgiesser U, Böke J, Ernst M. Imagine 09 : Prototyping Efn Mobile. Rotterdam; 2016.","ufg":"Knaack, Ulrich et. al. (2016): Imagine 09 : prototyping efn mobile, Rotterdam.","mla":"Knaack, Ulrich, et al. Imagine 09 : Prototyping Efn Mobile. 2016.","havard":"U. Knaack, T. Klein, M. Bilow, U. Pottgiesser, J. Böke, M. Ernst, Imagine 09 : prototyping efn mobile, Rotterdam, 2016.","bjps":"Knaack U et al. (2016) Imagine 09 : Prototyping Efn Mobile. Rotterdam.","apa":"Knaack, U., Klein, T., Bilow, M., Pottgiesser, U., Böke, J., & Ernst, M. (2016). Imagine 09 : prototyping efn mobile. Rotterdam.","ieee":"U. Knaack, T. Klein, M. Bilow, U. Pottgiesser, J. Böke, and M. Ernst, Imagine 09 : prototyping efn mobile. Rotterdam, 2016.","chicago":"Knaack, Ulrich, Tillman Klein, Marcel Bilow, Uta Pottgiesser, Jens Böke, and Maximilian Ernst. Imagine 09 : Prototyping Efn Mobile. Rotterdam, 2016.","short":"U. Knaack, T. Klein, M. Bilow, U. Pottgiesser, J. Böke, M. Ernst, Imagine 09 : Prototyping Efn Mobile, Rotterdam, 2016.","din1505-2-1":"Knaack, Ulrich ; Klein, Tillman ; Bilow, Marcel ; Pottgiesser, Uta ; Böke, Jens ; Ernst, Maximilian: Imagine 09 : prototyping efn mobile. Rotterdam, 2016","chicago-de":"Knaack, Ulrich, Tillman Klein, Marcel Bilow, Uta Pottgiesser, Jens Böke und Maximilian Ernst. 2016. Imagine 09 : prototyping efn mobile. Rotterdam."}},{"publication_status":"published","citation":{"short":"C. Kirch, U. Pottgiesser, in: Proceedings of the INTER-NOISE 2016 - 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future, German Acoustical Society (DEGA), 2016, pp. 3536–3547.","din1505-2-1":"Kirch, Chirstoph ; Pottgiesser, Uta: Low and mid frequency design - Implementation of room acoustics in different building types and for different kinds of use. In: Proceedings of the INTER-NOISE 2016 - 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future : German Acoustical Society (DEGA), 2016, S. 3536–3547","chicago-de":"Kirch, Chirstoph und Uta Pottgiesser. 2016. Low and mid frequency design - Implementation of room acoustics in different building types and for different kinds of use. In: Proceedings of the INTER-NOISE 2016 - 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future, 3536–3547. German Acoustical Society (DEGA).","ama":"Kirch C, Pottgiesser U. Low and mid frequency design - Implementation of room acoustics in different building types and for different kinds of use. In: Proceedings of the INTER-NOISE 2016 - 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future. German Acoustical Society (DEGA); 2016:3536-3547.","van":"Kirch C, Pottgiesser U. Low and mid frequency design - Implementation of room acoustics in different building types and for different kinds of use. In: Proceedings of the INTER-NOISE 2016 - 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future. German Acoustical Society (DEGA); 2016. p. 3536–47.","havard":"C. Kirch, U. Pottgiesser, Low and mid frequency design - Implementation of room acoustics in different building types and for different kinds of use, in: Proceedings of the INTER-NOISE 2016 - 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future, German Acoustical Society (DEGA), 2016: pp. 3536–3547.","mla":"Kirch, Chirstoph, and Uta Pottgiesser. “Low and Mid Frequency Design - Implementation of Room Acoustics in Different Building Types and for Different Kinds of Use.” Proceedings of the INTER-NOISE 2016 - 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future, German Acoustical Society (DEGA), 2016, pp. 3536–47.","bjps":"Kirch C and Pottgiesser U (2016) Low and Mid Frequency Design - Implementation of Room Acoustics in Different Building Types and for Different Kinds of Use. Proceedings of the INTER-NOISE 2016 - 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future. German Acoustical Society (DEGA), pp. 3536–3547.","ufg":"Kirch, Chirstoph/Pottgiesser, Uta (2016): Low and mid frequency design - Implementation of room acoustics in different building types and for different kinds of use, in: Proceedings of the INTER-NOISE 2016 - 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future, S. 3536–3547.","ieee":"C. Kirch and U. Pottgiesser, “Low and mid frequency design - Implementation of room acoustics in different building types and for different kinds of use,” in Proceedings of the INTER-NOISE 2016 - 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future, Hamburg, 2016, pp. 3536–3547.","apa":"Kirch, C., & Pottgiesser, U. (2016). Low and mid frequency design - Implementation of room acoustics in different building types and for different kinds of use. In Proceedings of the INTER-NOISE 2016 - 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future (pp. 3536–3547). Hamburg: German Acoustical Society (DEGA).","chicago":"Kirch, Chirstoph, and Uta Pottgiesser. “Low and Mid Frequency Design - Implementation of Room Acoustics in Different Building Types and for Different Kinds of Use.” In Proceedings of the INTER-NOISE 2016 - 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future, 3536–47. German Acoustical Society (DEGA), 2016."},"title":"Low and mid frequency design - Implementation of room acoustics in different building types and for different kinds of use","quality_controlled":"1","publisher":"German Acoustical Society (DEGA)","page":"3536-3547","status":"public","abstract":[{"lang":"eng","text":"In offices and most other working environments a high speech privacy and a low noise level is desired to allow for concentrated work and calm work conditions. Hence a low Speech Transmission Index (STI) is required, as even irrelevant speech information at lower volumes can be extremly disturbing and performance reducing. At the same time working environments demand for other - often conflicting - requirements such as transparency to ensure visual connections and daylight transmission, functional flexibility for diverse activities in the same space and for hygienic, environmental or security aspects. These requirements have to be balanced by a sensible and intelligent design and layout of absorbers and partition elements and partition. Three research projects investigated an optimised design of low and mid frequency absorbers for working environments to improve the acoustic and design quality of different products. Acoustically optimised indoor spaces may become more important in the future due to an increase of hearing impairments in the aging population as well as in the younger generations. This is seen not only as a technical but as a design challenge to balance optimised sound pressure levels, reverberation times and Speech Transmission Indices. © 2016, German Acoustical Society (DEGA). All rights reserved."}],"department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"conference":{"location":"Hamburg","name":"45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future","end_date":"2016-08-21","start_date":"2016-08-21"},"author":[{"last_name":"Kirch","first_name":"Chirstoph","full_name":"Kirch, Chirstoph"},{"last_name":"Pottgiesser","full_name":"Pottgiesser, Uta","first_name":"Uta","id":"27166","orcid":"0000-0002-8594-3168"}],"year":2016,"date_updated":"2023-03-15T13:49:58Z","user_id":"45673","type":"conference","date_created":"2021-03-03T14:23:05Z","publication":"Proceedings of the INTER-NOISE 2016 - 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future","_id":"5207","language":[{"iso":"eng"}],"keyword":["Additional requirements","Building types","Room acoustics"]},{"status":"public","main_file_link":[{"url":"https://www.yumpu.com/de/document/read/63562669/urbanlab-magazin-2016-schrumpfen-wir-noch-oder-wachsen-wir-schon","open_access":"1"}],"year":2016,"department":[{"_id":"DEP1303"},{"_id":"DEP1055"}],"abstract":[{"text":"Seit 2016 erscheint das urbanLab Magazin jährlich als Fachzeitschrift für Stadt- und Regionalplanung mit dem Anspruch Forschung, Lehre und der Praxis in den Planungsdisziplinen des Spannungsfeldes Stadt und Quartier anhand konkreter Themencluster besser zu vernetzen. Wir geben zukunftsweisenden Ideen, Fachbeiträgen, Publikationen und kontroversen Diskussionen eine Plattform und bringen sie unterstützt durch Erkenntnisse aus unserer Forschung auf den Punkt.","lang":"ger"}],"issue":"1","citation":{"mla":"Hall, Oliver, et al., editors. “urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung.” Schrumpfen wir noch oder wachsen wir schon? , no. 1, 2016.","bjps":"Hall O, Cardinali M and Technische Hochschule Ostwestfalen-Lippe (eds) (2016) urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. .","havard":"O. Hall, M. Cardinali, Technische Hochschule Ostwestfalen-Lippe, eds., urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, 2016.","ufg":"Hall, Oliver et. al. (Hgg.) (2016): urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung.","van":"Hall O, Cardinali M, Technische Hochschule Ostwestfalen-Lippe, editors. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. Schrumpfen wir noch oder wachsen wir schon? . 2016.","chicago":"Hall, Oliver, Marcel Cardinali, and Technische Hochschule Ostwestfalen-Lippe, eds. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. Schrumpfen wir noch oder wachsen wir schon? , 2016.","apa":"Hall, O., Cardinali, M., & Technische Hochschule Ostwestfalen-Lippe (Eds.). (2016). urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. Schrumpfen wir noch oder wachsen wir schon? .","din1505-2-1":"Hall, O. ; Cardinali, M. ; Technische Hochschule Ostwestfalen-Lippe (Hrsg.): urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, 2016","chicago-de":"Hall, Oliver, Marcel Cardinali und Technische Hochschule Ostwestfalen-Lippe, Hrsg. 2016. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung. Schrumpfen wir noch oder wachsen wir schon? .","short":"O. Hall, M. Cardinali, Technische Hochschule Ostwestfalen-Lippe, eds., urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, 2016.","ama":"Hall O, Cardinali M, Technische Hochschule Ostwestfalen-Lippe, eds. urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung.; 2016.","ieee":"O. Hall, M. Cardinali, and Technische Hochschule Ostwestfalen-Lippe, Eds., urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung, no. 1. 2016."},"publication_status":"published","title":"urbanLab Magazin - Fachzeitschrift für Stadt- & Quartiersplanung","language":[{"iso":"ger"}],"_id":"5363","oa":"1","user_id":"45673","date_updated":"2023-03-15T13:49:59Z","corporate_editor":["Technische Hochschule Ostwestfalen-Lippe","Forschungsschwerpunkt urbanLab"],"editor":[{"first_name":"Oliver","full_name":"Hall, Oliver","last_name":"Hall","id":"27136"},{"id":"58462","last_name":"Cardinali","first_name":"Marcel","full_name":"Cardinali, Marcel","orcid":"0000-0002-8841-9345"}],"publication_identifier":{"eissn":["2566-8919"],"issn":["2566-8900"]},"publication":"Schrumpfen wir noch oder wachsen wir schon? ","date_created":"2021-03-30T10:48:43Z","type":"journal_editor"},{"date_updated":"2024-05-24T09:07:32Z","user_id":"83779","date_created":"2021-04-14T12:48:01Z","type":"conference","publication":"ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik (Poster), Erlangen, 03/2016","_id":"5519","language":[{"iso":"ger"}],"publication_status":"published","citation":{"short":"S. Rossmann, C. Merck, J. Schneider, U. Müller, R. Kohlus, in: ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik (Poster), Erlangen, 03/2016, 2016.","chicago-de":"Rossmann, Sören, C. Merck, Jan Schneider, Ulrich Müller und R. Kohlus. 2016. Herstellung von Getränkeemulsionen mit dem innovativen Gegenstrominjektionsverfahren. In: ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik (Poster), Erlangen, 03/2016.","din1505-2-1":"Rossmann, Sören ; Merck, C. ; Schneider, Jan ; Müller, Ulrich ; Kohlus, R.: Herstellung von Getränkeemulsionen mit dem innovativen Gegenstrominjektionsverfahren. In: ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik (Poster), Erlangen, 03/2016, 2016","van":"Rossmann S, Merck C, Schneider J, Müller U, Kohlus R. Herstellung von Getränkeemulsionen mit dem innovativen Gegenstrominjektionsverfahren. In: ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik (Poster), Erlangen, 03/2016. 2016.","ama":"Rossmann S, Merck C, Schneider J, Müller U, Kohlus R. Herstellung von Getränkeemulsionen mit dem innovativen Gegenstrominjektionsverfahren. In: ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik (Poster), Erlangen, 03/2016. ; 2016.","ufg":"Rossmann, Sören u. a.: Herstellung von Getränkeemulsionen mit dem innovativen Gegenstrominjektionsverfahren, in: o. Hg.: ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik (Poster), Erlangen, 03/2016, o. O. 2016.","havard":"S. Rossmann, C. Merck, J. Schneider, U. Müller, R. Kohlus, Herstellung von Getränkeemulsionen mit dem innovativen Gegenstrominjektionsverfahren, in: ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik (Poster), Erlangen, 03/2016, 2016.","bjps":"Rossmann S et al. (2016) Herstellung von Getränkeemulsionen mit dem innovativen Gegenstrominjektionsverfahren. ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik (Poster), Erlangen, 03/2016.","mla":"Rossmann, Sören, et al. “Herstellung von Getränkeemulsionen mit dem innovativen Gegenstrominjektionsverfahren.” ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik (Poster), Erlangen, 03/2016, 2016.","apa":"Rossmann, S., Merck, C., Schneider, J., Müller, U., & Kohlus, R. (2016). Herstellung von Getränkeemulsionen mit dem innovativen Gegenstrominjektionsverfahren. ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik (Poster), Erlangen, 03/2016. ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik, Erlangen.","ieee":"S. Rossmann, C. Merck, J. Schneider, U. Müller, and R. Kohlus, “Herstellung von Getränkeemulsionen mit dem innovativen Gegenstrominjektionsverfahren,” presented at the ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik, Erlangen, 2016.","chicago":"Rossmann, Sören, C. Merck, Jan Schneider, Ulrich Müller, and R. Kohlus. “Herstellung von Getränkeemulsionen mit dem innovativen Gegenstrominjektionsverfahren.” In ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik (Poster), Erlangen, 03/2016, 2016."},"title":"Herstellung von Getränkeemulsionen mit dem innovativen Gegenstrominjektionsverfahren","status":"public","department":[{"_id":"DEP4023"},{"_id":"DEP4009"},{"_id":"DEP4018"}],"conference":{"name":"ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik","location":"Erlangen","end_date":"2016-03-11","start_date":"2016-03-09"},"author":[{"full_name":"Rossmann, Sören","last_name":"Rossmann","id":"61416","first_name":"Sören"},{"first_name":"C.","last_name":"Merck","full_name":"Merck, C."},{"orcid":"0000-0001-6401-8873","first_name":"Jan","last_name":"Schneider","full_name":"Schneider, Jan","id":"13209"},{"first_name":"Ulrich","full_name":"Müller, Ulrich","id":"12119","last_name":"Müller"},{"full_name":"Kohlus, R.","first_name":"R.","last_name":"Kohlus"}],"year":"2016"},{"citation":{"ama":"Müller U, Pliske R, Kohlus R, Weber H. Untersuchungen zur Aktivität gefriergetrockneter und revitalisierter Pediococcus pentosaceus-Starterkulturen . In: ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik (Vortrag), Erlangen, 09.-11.03.2016. ; 2016.","ieee":"U. Müller, R. Pliske, R. Kohlus, and H. Weber, “Untersuchungen zur Aktivität gefriergetrockneter und revitalisierter Pediococcus pentosaceus-Starterkulturen ,” in ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik (Vortrag), Erlangen, 09.-11.03.2016, Erlangen, 2016.","van":"Müller U, Pliske R, Kohlus R, Weber H. Untersuchungen zur Aktivität gefriergetrockneter und revitalisierter Pediococcus pentosaceus-Starterkulturen . In: ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik (Vortrag), Erlangen, 09-11032016. 2016.","ufg":"Müller, Ulrich et. al. (2016): Untersuchungen zur Aktivität gefriergetrockneter und revitalisierter Pediococcus pentosaceus-Starterkulturen , in: ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik (Vortrag), Erlangen, 09.-11.03.2016.","havard":"U. Müller, R. Pliske, R. Kohlus, H. Weber, Untersuchungen zur Aktivität gefriergetrockneter und revitalisierter Pediococcus pentosaceus-Starterkulturen , in: ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik (Vortrag), Erlangen, 09.-11.03.2016, 2016.","bjps":"Müller U et al. (2016) Untersuchungen zur Aktivität gefriergetrockneter und revitalisierter Pediococcus pentosaceus-Starterkulturen . ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik (Vortrag), Erlangen, 09.-11.03.2016.","mla":"Müller, Ulrich, et al. “Untersuchungen zur Aktivität gefriergetrockneter und revitalisierter Pediococcus pentosaceus-Starterkulturen .” ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik (Vortrag), Erlangen, 09.-11.03.2016, 2016.","apa":"Müller, U., Pliske, R., Kohlus, R., & Weber, H. (2016). Untersuchungen zur Aktivität gefriergetrockneter und revitalisierter Pediococcus pentosaceus-Starterkulturen . In ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik (Vortrag), Erlangen, 09.-11.03.2016. Erlangen.","chicago":"Müller, Ulrich, Roland Pliske, R. Kohlus, and H. Weber. “Untersuchungen zur Aktivität gefriergetrockneter und revitalisierter Pediococcus pentosaceus-Starterkulturen .” In ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik (Vortrag), Erlangen, 09.-11.03.2016, 2016.","short":"U. Müller, R. Pliske, R. Kohlus, H. Weber, in: ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik (Vortrag), Erlangen, 09.-11.03.2016, 2016.","din1505-2-1":"Müller, Ulrich ; Pliske, Roland ; Kohlus, R. ; Weber, H.: Untersuchungen zur Aktivität gefriergetrockneter und revitalisierter Pediococcus pentosaceus-Starterkulturen . In: ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik (Vortrag), Erlangen, 09.-11.03.2016, 2016","chicago-de":"Müller, Ulrich, Roland Pliske, R. Kohlus und H. Weber. 2016. Untersuchungen zur Aktivität gefriergetrockneter und revitalisierter Pediococcus pentosaceus-Starterkulturen . In: ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik (Vortrag), Erlangen, 09.-11.03.2016."},"publication_status":"published","title":"Untersuchungen zur Aktivität gefriergetrockneter und revitalisierter Pediococcus pentosaceus-Starterkulturen ","status":"public","year":2016,"author":[{"id":"12119","last_name":"Müller","first_name":"Ulrich","full_name":"Müller, Ulrich"},{"last_name":"Pliske","first_name":"Roland","full_name":"Pliske, Roland","id":"12864"},{"first_name":"R.","full_name":"Kohlus, R.","last_name":"Kohlus"},{"first_name":"H.","full_name":"Weber, H.","last_name":"Weber"}],"conference":{"location":"Erlangen","name":"ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik ","end_date":"2016-03-11","start_date":"2016-03-09"},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"user_id":"15514","date_updated":"2023-03-15T13:50:00Z","publication":"ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik (Vortrag), Erlangen, 09.-11.03.2016","type":"conference","date_created":"2021-04-14T12:52:29Z","language":[{"iso":"ger"}],"_id":"5521"},{"publication_status":"published","citation":{"short":"R. Pliske, U. Müller, R. Kohlus, in: ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik, Erlangen, 09.-11.03.2016, 2016.","chicago-de":"Pliske, Roland, Ulrich Müller und R. Kohlus. 2016. Vergleich der statischen und dynamischen Gefriertrocknung mittels Modellierung. In: ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik, Erlangen, 09.-11.03.2016.","din1505-2-1":"Pliske, Roland ; Müller, Ulrich ; Kohlus, R.: Vergleich der statischen und dynamischen Gefriertrocknung mittels Modellierung. In: ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik, Erlangen, 09.-11.03.2016, 2016","apa":"Pliske, R., Müller, U., & Kohlus, R. (2016). Vergleich der statischen und dynamischen Gefriertrocknung mittels Modellierung. In ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik, Erlangen, 09.-11.03.2016. Erlangen.","chicago":"Pliske, Roland, Ulrich Müller, and R. Kohlus. “Vergleich der statischen und dynamischen Gefriertrocknung mittels Modellierung.” In ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik, Erlangen, 09.-11.03.2016, 2016.","van":"Pliske R, Müller U, Kohlus R. Vergleich der statischen und dynamischen Gefriertrocknung mittels Modellierung. In: ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik, Erlangen, 09-11032016. 2016.","bjps":"Pliske R, Müller U and Kohlus R (2016) Vergleich der statischen und dynamischen Gefriertrocknung mittels Modellierung. ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik, Erlangen, 09.-11.03.2016.","mla":"Pliske, Roland, et al. “Vergleich der statischen und dynamischen Gefriertrocknung mittels Modellierung.” ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik, Erlangen, 09.-11.03.2016, 2016.","havard":"R. Pliske, U. Müller, R. Kohlus, Vergleich der statischen und dynamischen Gefriertrocknung mittels Modellierung, in: ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik, Erlangen, 09.-11.03.2016, 2016.","ufg":"Pliske, Roland et. al. (2016): Vergleich der statischen und dynamischen Gefriertrocknung mittels Modellierung, in: ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik, Erlangen, 09.-11.03.2016.","ieee":"R. Pliske, U. Müller, and R. Kohlus, “Vergleich der statischen und dynamischen Gefriertrocknung mittels Modellierung,” in ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik, Erlangen, 09.-11.03.2016, Erlangen, 2016.","ama":"Pliske R, Müller U, Kohlus R. Vergleich der statischen und dynamischen Gefriertrocknung mittels Modellierung. In: ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik, Erlangen, 09.-11.03.2016. ; 2016."},"title":"Vergleich der statischen und dynamischen Gefriertrocknung mittels Modellierung","status":"public","department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"conference":{"name":"ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik","location":"Erlangen","end_date":"2016-03-11","start_date":"2016-03-09"},"year":2016,"author":[{"last_name":"Pliske","full_name":"Pliske, Roland","id":"12864","first_name":"Roland"},{"id":"12119","full_name":"Müller, Ulrich","last_name":"Müller","first_name":"Ulrich"},{"last_name":"Kohlus","first_name":"R.","full_name":"Kohlus, R."}],"date_updated":"2023-03-15T13:50:00Z","user_id":"15514","type":"conference","date_created":"2021-04-14T12:54:55Z","publication":"ProcessNet-Jahrestagung Lebensmittelverfahrenstechnik, Erlangen, 09.-11.03.2016","_id":"5522","language":[{"iso":"ger"}]},{"date_updated":"2024-05-22T09:49:35Z","user_id":"83779","type":"journal_article","date_created":"2021-04-14T13:00:06Z","publication_identifier":{"issn":["1619-537X"]},"publication":"Brauwelt. En español ","language":[{"iso":"spa"}],"_id":"5523","publication_status":"published","citation":{"din1505-2-1":"Damman, Anna ; Schwarzer, Knut ; Schneider, Jan: Examen de instalaciones de pasteurizatión. In: Brauwelt. En español , Fachverlag Hans Carl GmbH (2016), S. 116–119","chicago-de":"Damman, Anna, Knut Schwarzer und Jan Schneider. 2016. Examen de instalaciones de pasteurizatión. Brauwelt. En español : 116–119.","short":"A. Damman, K. Schwarzer, J. Schneider, Brauwelt. En español (2016) 116–119.","bjps":"Damman A, Schwarzer K and Schneider J (2016) Examen de instalaciones de pasteurizatión. Brauwelt. En español 116–119.","havard":"A. Damman, K. Schwarzer, J. Schneider, Examen de instalaciones de pasteurizatión, Brauwelt. En español . (2016) 116–119.","mla":"Damman, Anna, et al. “Examen de instalaciones de pasteurizatión.” Brauwelt. En español , 2016, pp. 116–19.","ufg":"Damman, Anna/Schwarzer, Knut/Schneider, Jan: Examen de instalaciones de pasteurizatión, in: Brauwelt. En español (2016), S. 116–119.","ama":"Damman A, Schwarzer K, Schneider J. Examen de instalaciones de pasteurizatión. Brauwelt En español . Published online 2016:116-119.","van":"Damman A, Schwarzer K, Schneider J. Examen de instalaciones de pasteurizatión. Brauwelt En español . 2016;116–9.","chicago":"Damman, Anna, Knut Schwarzer, and Jan Schneider. “Examen de instalaciones de pasteurizatión.” Brauwelt. En español , 2016, 116–19.","ieee":"A. Damman, K. Schwarzer, and J. Schneider, “Examen de instalaciones de pasteurizatión,” Brauwelt. En español , pp. 116–119, 2016.","apa":"Damman, A., Schwarzer, K., & Schneider, J. (2016). Examen de instalaciones de pasteurizatión. Brauwelt. En español , 116–119."},"title":"Examen de instalaciones de pasteurizatión","page":"116-119","status":"public","publisher":"Fachverlag Hans Carl GmbH","department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"author":[{"first_name":"Anna","last_name":"Damman","full_name":"Damman, Anna"},{"first_name":"Knut","last_name":"Schwarzer","full_name":"Schwarzer, Knut","id":"13329"},{"orcid":"0000-0001-6401-8873","full_name":"Schneider, Jan","first_name":"Jan","last_name":"Schneider","id":"13209"}],"year":"2016"},{"status":"public","publisher":"Kuhn","year":"2016","author":[{"first_name":"Jan","id":"13209","full_name":"Schneider, Jan","last_name":"Schneider","orcid":"0000-0001-6401-8873"}],"department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"citation":{"chicago":"Schneider, Jan. “Thema 2016: Morgen ist heute schon gestern. Unbeständigkeit - Segen oder Fluch?” Getränke + Lebensmittel Herstellung : Inhaltsstoffe + Technik + Logistik : Informationen für die Wirtschaft, 2016.","ieee":"J. Schneider, “Thema 2016: Morgen ist heute schon gestern. Unbeständigkeit - Segen oder Fluch?,” Getränke + Lebensmittel Herstellung : Inhaltsstoffe + Technik + Logistik : Informationen für die Wirtschaft, 2016.","apa":"Schneider, J. (2016). Thema 2016: Morgen ist heute schon gestern. Unbeständigkeit - Segen oder Fluch? Getränke + Lebensmittel Herstellung : Inhaltsstoffe + Technik + Logistik : Informationen für die Wirtschaft.","havard":"J. Schneider, Thema 2016: Morgen ist heute schon gestern. Unbeständigkeit - Segen oder Fluch?, Getränke + Lebensmittel Herstellung : Inhaltsstoffe + Technik + Logistik : Informationen für die Wirtschaft. (2016).","mla":"Schneider, Jan. “Thema 2016: Morgen ist heute schon gestern. Unbeständigkeit - Segen oder Fluch?” Getränke + Lebensmittel Herstellung : Inhaltsstoffe + Technik + Logistik : Informationen für die Wirtschaft, 2016.","bjps":"Schneider J (2016) Thema 2016: Morgen ist heute schon gestern. Unbeständigkeit - Segen oder Fluch? Getränke + Lebensmittel Herstellung : Inhaltsstoffe + Technik + Logistik : Informationen für die Wirtschaft.","ufg":"Schneider, Jan: Thema 2016: Morgen ist heute schon gestern. Unbeständigkeit - Segen oder Fluch?, in: Getränke + Lebensmittel Herstellung : Inhaltsstoffe + Technik + Logistik : Informationen für die Wirtschaft (2016).","ama":"Schneider J. Thema 2016: Morgen ist heute schon gestern. Unbeständigkeit - Segen oder Fluch? Getränke + Lebensmittel Herstellung : Inhaltsstoffe + Technik + Logistik : Informationen für die Wirtschaft. Published online 2016.","van":"Schneider J. Thema 2016: Morgen ist heute schon gestern. Unbeständigkeit - Segen oder Fluch? Getränke + Lebensmittel Herstellung : Inhaltsstoffe + Technik + Logistik : Informationen für die Wirtschaft. 2016;","din1505-2-1":"Schneider, Jan: Thema 2016: Morgen ist heute schon gestern. Unbeständigkeit - Segen oder Fluch? In: Getränke + Lebensmittel Herstellung : Inhaltsstoffe + Technik + Logistik : Informationen für die Wirtschaft, Kuhn (2016)","chicago-de":"Schneider, Jan. 2016. Thema 2016: Morgen ist heute schon gestern. Unbeständigkeit - Segen oder Fluch? Getränke + Lebensmittel Herstellung : Inhaltsstoffe + Technik + Logistik : Informationen für die Wirtschaft.","short":"J. Schneider, Getränke + Lebensmittel Herstellung : Inhaltsstoffe + Technik + Logistik : Informationen für die Wirtschaft (2016)."},"publication_status":"published","title":"Thema 2016: Morgen ist heute schon gestern. Unbeständigkeit - Segen oder Fluch?","language":[{"iso":"ger"}],"_id":"5524","user_id":"83779","date_updated":"2024-05-22T09:50:14Z","publication":" Getränke + Lebensmittel Herstellung : Inhaltsstoffe + Technik + Logistik : Informationen für die Wirtschaft","publication_identifier":{"issn":["2509-8853 "]},"date_created":"2021-04-14T13:03:11Z","type":"journal_article"},{"intvolume":" 48","user_id":"65129","date_updated":"2024-06-26T13:50:13Z","publication":"Lebensmitteltechnik ","publication_identifier":{"issn":["0047-4290 "]},"date_created":"2021-04-14T13:11:23Z","type":"industry_journal_article","_id":"5525","place":"LT Food-Medien-Verl.","language":[{"iso":"eng"}],"volume":48,"citation":{"ieee":"T. Wiese, S. Brunklaus, H.-J. Danneel, and N. Reichl, “Mit Fokus auf ‘Lebensmittel 4.0’ - Ein Projekt an der Hochschule Ostwestfalen-Lippe widmet sich dem digitalen Wandel,” Lebensmitteltechnik , vol. 48, no. 12, p. 52, 2016.","ama":"Wiese T, Brunklaus S, Danneel HJ, Reichl N. Mit Fokus auf “Lebensmittel 4.0” - Ein Projekt an der Hochschule Ostwestfalen-Lippe widmet sich dem digitalen Wandel. Lebensmitteltechnik . 2016;48(12):52.","din1505-2-1":"Wiese, T. ; Brunklaus, Sabine ; Danneel, Hans-Jürgen ; Reichl, N.: Mit Fokus auf „Lebensmittel 4.0“ - Ein Projekt an der Hochschule Ostwestfalen-Lippe widmet sich dem digitalen Wandel. In: Lebensmitteltechnik Bd. 48. LT Food-Medien-Verl., Hamburg (2016), Nr. 12, S. 52","chicago-de":"Wiese, T., Sabine Brunklaus, Hans-Jürgen Danneel und N. Reichl. 2016. Mit Fokus auf „Lebensmittel 4.0“ - Ein Projekt an der Hochschule Ostwestfalen-Lippe widmet sich dem digitalen Wandel. Lebensmitteltechnik 48, Nr. 12: 52.","short":"T. Wiese, S. Brunklaus, H.-J. Danneel, N. Reichl, Lebensmitteltechnik 48 (2016) 52.","chicago":"Wiese, T., Sabine Brunklaus, Hans-Jürgen Danneel, and N. Reichl. “Mit Fokus Auf ‘Lebensmittel 4.0’ - Ein Projekt an Der Hochschule Ostwestfalen-Lippe Widmet Sich Dem Digitalen Wandel.” Lebensmitteltechnik 48, no. 12 (2016): 52.","apa":"Wiese, T., Brunklaus, S., Danneel, H.-J., & Reichl, N. (2016). Mit Fokus auf “Lebensmittel 4.0” - Ein Projekt an der Hochschule Ostwestfalen-Lippe widmet sich dem digitalen Wandel. Lebensmitteltechnik , 48(12), 52.","havard":"T. Wiese, S. Brunklaus, H.-J. Danneel, N. Reichl, Mit Fokus auf “Lebensmittel 4.0” - Ein Projekt an der Hochschule Ostwestfalen-Lippe widmet sich dem digitalen Wandel, Lebensmitteltechnik . 48 (2016) 52.","bjps":"Wiese T et al. (2016) Mit Fokus Auf ‘Lebensmittel 4.0’ - Ein Projekt an Der Hochschule Ostwestfalen-Lippe Widmet Sich Dem Digitalen Wandel. Lebensmitteltechnik 48, 52.","mla":"Wiese, T., et al. “Mit Fokus Auf ‘Lebensmittel 4.0’ - Ein Projekt an Der Hochschule Ostwestfalen-Lippe Widmet Sich Dem Digitalen Wandel.” Lebensmitteltechnik , vol. 48, no. 12, 2016, p. 52.","ufg":"Wiese, T. u. a.: Mit Fokus auf „Lebensmittel 4.0“ - Ein Projekt an der Hochschule Ostwestfalen-Lippe widmet sich dem digitalen Wandel, in: Lebensmitteltechnik 48 (2016), H. 12, S. 52.","van":"Wiese T, Brunklaus S, Danneel HJ, Reichl N. Mit Fokus auf “Lebensmittel 4.0” - Ein Projekt an der Hochschule Ostwestfalen-Lippe widmet sich dem digitalen Wandel. Lebensmitteltechnik . 2016;48(12):52."},"publication_status":"published","title":"Mit Fokus auf \"Lebensmittel 4.0\" - Ein Projekt an der Hochschule Ostwestfalen-Lippe widmet sich dem digitalen Wandel","publisher":" Hamburg","status":"public","page":"52","issue":"12","year":"2016","author":[{"full_name":"Wiese, T.","last_name":"Wiese","first_name":"T."},{"id":"65129","last_name":"Brunklaus","full_name":"Brunklaus, Sabine","first_name":"Sabine"},{"first_name":"Hans-Jürgen","full_name":"Danneel, Hans-Jürgen","id":"12231","last_name":"Danneel"},{"full_name":"Reichl, N.","last_name":"Reichl","first_name":"N."}],"department":[{"_id":"DEP4023"},{"_id":"DEP4027"}]},{"status":"public","department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"conference":{"name":"Plattformtreffen Netzwerk Brenstoffzelle und Wasserstoff, ZBT ","location":"Duisburg","start_date":"2016-06-30"},"author":[{"first_name":"Marc","id":"52330","full_name":"Hoffarth, Marc","last_name":"Hoffarth"}],"year":"2016","publication_status":"published","citation":{"van":"Hoffarth M. Neumitgliedervorstellung Netzwerk Brennstoffzelle und Wasserstoff. In: Plattformtreffen Netzwerk Brenstoffzelle und Wasserstoff, ZBT Duisburg. 2016.","havard":"M. Hoffarth, Neumitgliedervorstellung Netzwerk Brennstoffzelle und Wasserstoff, in: Plattformtreffen Netzwerk Brenstoffzelle und Wasserstoff, ZBT Duisburg, 2016.","bjps":"Hoffarth M (2016) Neumitgliedervorstellung Netzwerk Brennstoffzelle und Wasserstoff. Plattformtreffen Netzwerk Brenstoffzelle und Wasserstoff, ZBT Duisburg.","mla":"Hoffarth, Marc. “Neumitgliedervorstellung Netzwerk Brennstoffzelle und Wasserstoff.” Plattformtreffen Netzwerk Brenstoffzelle und Wasserstoff, ZBT Duisburg, 2016.","ufg":"Hoffarth, Marc: Neumitgliedervorstellung Netzwerk Brennstoffzelle und Wasserstoff, in: o. Hg.: Plattformtreffen Netzwerk Brenstoffzelle und Wasserstoff, ZBT Duisburg, o. O. 2016.","apa":"Hoffarth, M. (2016). Neumitgliedervorstellung Netzwerk Brennstoffzelle und Wasserstoff. Plattformtreffen Netzwerk Brenstoffzelle und Wasserstoff, ZBT Duisburg. Plattformtreffen Netzwerk Brenstoffzelle und Wasserstoff, ZBT , Duisburg.","chicago":"Hoffarth, Marc. “Neumitgliedervorstellung Netzwerk Brennstoffzelle und Wasserstoff.” In Plattformtreffen Netzwerk Brenstoffzelle und Wasserstoff, ZBT Duisburg, 2016.","short":"M. Hoffarth, in: Plattformtreffen Netzwerk Brenstoffzelle und Wasserstoff, ZBT Duisburg, 2016.","din1505-2-1":"Hoffarth, Marc: Neumitgliedervorstellung Netzwerk Brennstoffzelle und Wasserstoff. In: Plattformtreffen Netzwerk Brenstoffzelle und Wasserstoff, ZBT Duisburg, 2016","chicago-de":"Hoffarth, Marc. 2016. Neumitgliedervorstellung Netzwerk Brennstoffzelle und Wasserstoff. In: Plattformtreffen Netzwerk Brenstoffzelle und Wasserstoff, ZBT Duisburg.","ama":"Hoffarth M. Neumitgliedervorstellung Netzwerk Brennstoffzelle und Wasserstoff. In: Plattformtreffen Netzwerk Brenstoffzelle und Wasserstoff, ZBT Duisburg. ; 2016.","ieee":"M. Hoffarth, “Neumitgliedervorstellung Netzwerk Brennstoffzelle und Wasserstoff,” presented at the Plattformtreffen Netzwerk Brenstoffzelle und Wasserstoff, ZBT , Duisburg, 2016."},"title":"Neumitgliedervorstellung Netzwerk Brennstoffzelle und Wasserstoff","language":[{"iso":"ger"}],"_id":"5526","date_updated":"2024-05-22T09:50:50Z","user_id":"83779","date_created":"2021-04-14T13:13:55Z","type":"conference","publication":"Plattformtreffen Netzwerk Brenstoffzelle und Wasserstoff, ZBT Duisburg"},{"date_updated":"2024-05-22T09:51:27Z","user_id":"83779","type":"conference","date_created":"2021-04-14T13:17:39Z","publication":"GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 21.10.2016","language":[{"iso":"ger"}],"_id":"5528","publication_status":"published","citation":{"ieee":"S. Rossmann, C. Merck, R. Kohlus, J. Schneider, and U. Müller, “Einfluss der Prozessparametrierung auf die Qualität von Getränkeemulsionen beim Gegenstrominjektionsverfahren,” presented at the GDL-Kongress Lebensmitteltechnologie, Lemgo, 2016.","ama":"Rossmann S, Merck C, Kohlus R, Schneider J, Müller U. Einfluss der Prozessparametrierung auf die Qualität von Getränkeemulsionen beim Gegenstrominjektionsverfahren. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 21.10.2016. ; 2016.","chicago":"Rossmann, Sören, C. Merck, R. Kohlus, Jan Schneider, and Ulrich Müller. “Einfluss der Prozessparametrierung auf die Qualität von Getränkeemulsionen beim Gegenstrominjektionsverfahren.” In GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 21.10.2016, 2016.","apa":"Rossmann, S., Merck, C., Kohlus, R., Schneider, J., & Müller, U. (2016). Einfluss der Prozessparametrierung auf die Qualität von Getränkeemulsionen beim Gegenstrominjektionsverfahren. GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 21.10.2016. GDL-Kongress Lebensmitteltechnologie, Lemgo.","bjps":"Rossmann S et al. (2016) Einfluss der Prozessparametrierung auf die Qualität von Getränkeemulsionen beim Gegenstrominjektionsverfahren. GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 21.10.2016.","havard":"S. Rossmann, C. Merck, R. Kohlus, J. Schneider, U. Müller, Einfluss der Prozessparametrierung auf die Qualität von Getränkeemulsionen beim Gegenstrominjektionsverfahren, in: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 21.10.2016, 2016.","mla":"Rossmann, Sören, et al. “Einfluss der Prozessparametrierung auf die Qualität von Getränkeemulsionen beim Gegenstrominjektionsverfahren.” GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 21.10.2016, 2016.","ufg":"Rossmann, Sören u. a.: Einfluss der Prozessparametrierung auf die Qualität von Getränkeemulsionen beim Gegenstrominjektionsverfahren, in: o. Hg.: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 21.10.2016, o. O. 2016.","van":"Rossmann S, Merck C, Kohlus R, Schneider J, Müller U. Einfluss der Prozessparametrierung auf die Qualität von Getränkeemulsionen beim Gegenstrominjektionsverfahren. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 21102016. 2016.","din1505-2-1":"Rossmann, Sören ; Merck, C. ; Kohlus, R. ; Schneider, Jan ; Müller, Ulrich: Einfluss der Prozessparametrierung auf die Qualität von Getränkeemulsionen beim Gegenstrominjektionsverfahren. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 21.10.2016, 2016","chicago-de":"Rossmann, Sören, C. Merck, R. Kohlus, Jan Schneider und Ulrich Müller. 2016. Einfluss der Prozessparametrierung auf die Qualität von Getränkeemulsionen beim Gegenstrominjektionsverfahren. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 21.10.2016.","short":"S. Rossmann, C. Merck, R. Kohlus, J. Schneider, U. Müller, in: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 21.10.2016, 2016."},"title":"Einfluss der Prozessparametrierung auf die Qualität von Getränkeemulsionen beim Gegenstrominjektionsverfahren","status":"public","department":[{"_id":"DEP4023"},{"_id":"DEP4009"},{"_id":"DEP4018"}],"conference":{"start_date":"2016-10-20","end_date":"2016-10-22","location":"Lemgo","name":"GDL-Kongress Lebensmitteltechnologie"},"author":[{"id":"61416","first_name":"Sören","last_name":"Rossmann","full_name":"Rossmann, Sören"},{"first_name":"C.","full_name":"Merck, C.","last_name":"Merck"},{"last_name":"Kohlus","first_name":"R.","full_name":"Kohlus, R."},{"orcid":"0000-0001-6401-8873","id":"13209","last_name":"Schneider","first_name":"Jan","full_name":"Schneider, Jan"},{"full_name":"Müller, Ulrich","id":"12119","first_name":"Ulrich","last_name":"Müller"}],"year":"2016"},{"date_updated":"2023-03-15T13:50:00Z","user_id":"15514","date_created":"2021-04-14T13:17:39Z","type":"conference","publication":"GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 21.10.2016","language":[{"iso":"ger"}],"_id":"5529","publication_status":"published","citation":{"short":"A. Lütke Föller, K. Schwarzer, P. Wilhelm, U. Müller, K. Ollesch, T. Schiller, in: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 21.10.2016, 2016.","din1505-2-1":"Lütke Föller, Anna ; Schwarzer, Knut ; Wilhelm, Patrick ; Müller, Ulrich ; Ollesch, K. ; Schiller, T.: Erste Erfahrungen mit einer Strömungszelle zur Aufnahme von Reinigungskinetiken von Werkstoffoberflächen. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 21.10.2016, 2016","chicago-de":"Lütke Föller, Anna, Knut Schwarzer, Patrick Wilhelm, Ulrich Müller, K. Ollesch und T. Schiller. 2016. Erste Erfahrungen mit einer Strömungszelle zur Aufnahme von Reinigungskinetiken von Werkstoffoberflächen. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 21.10.2016.","ama":"Lütke Föller A, Schwarzer K, Wilhelm P, Müller U, Ollesch K, Schiller T. Erste Erfahrungen mit einer Strömungszelle zur Aufnahme von Reinigungskinetiken von Werkstoffoberflächen. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 21.10.2016. ; 2016.","van":"Lütke Föller A, Schwarzer K, Wilhelm P, Müller U, Ollesch K, Schiller T. Erste Erfahrungen mit einer Strömungszelle zur Aufnahme von Reinigungskinetiken von Werkstoffoberflächen. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 21102016. 2016.","mla":"Lütke Föller, Anna, et al. “Erste Erfahrungen mit einer Strömungszelle zur Aufnahme von Reinigungskinetiken von Werkstoffoberflächen.” GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 21.10.2016, 2016.","havard":"A. Lütke Föller, K. Schwarzer, P. Wilhelm, U. Müller, K. Ollesch, T. Schiller, Erste Erfahrungen mit einer Strömungszelle zur Aufnahme von Reinigungskinetiken von Werkstoffoberflächen, in: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 21.10.2016, 2016.","bjps":"Lütke Föller A et al. (2016) Erste Erfahrungen mit einer Strömungszelle zur Aufnahme von Reinigungskinetiken von Werkstoffoberflächen. GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 21.10.2016.","ufg":"Lütke Föller, Anna et. al. (2016): Erste Erfahrungen mit einer Strömungszelle zur Aufnahme von Reinigungskinetiken von Werkstoffoberflächen, in: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 21.10.2016.","ieee":"A. Lütke Föller, K. Schwarzer, P. Wilhelm, U. Müller, K. Ollesch, and T. Schiller, “Erste Erfahrungen mit einer Strömungszelle zur Aufnahme von Reinigungskinetiken von Werkstoffoberflächen,” in GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 21.10.2016, Lemgo, 2016.","apa":"Lütke Föller, A., Schwarzer, K., Wilhelm, P., Müller, U., Ollesch, K., & Schiller, T. (2016). Erste Erfahrungen mit einer Strömungszelle zur Aufnahme von Reinigungskinetiken von Werkstoffoberflächen. In GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 21.10.2016. Lemgo.","chicago":"Lütke Föller, Anna, Knut Schwarzer, Patrick Wilhelm, Ulrich Müller, K. Ollesch, and T. Schiller. “Erste Erfahrungen mit einer Strömungszelle zur Aufnahme von Reinigungskinetiken von Werkstoffoberflächen.” In GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 21.10.2016, 2016."},"title":"Erste Erfahrungen mit einer Strömungszelle zur Aufnahme von Reinigungskinetiken von Werkstoffoberflächen","status":"public","conference":{"end_date":"2016-10-22","start_date":"2016-10-20","name":"GDL-Kongress Lebensmitteltechnologie","location":"Lemgo"},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"year":2016,"author":[{"full_name":"Lütke Föller, Anna","first_name":"Anna","last_name":"Lütke Föller"},{"first_name":"Knut","id":"13329","last_name":"Schwarzer","full_name":"Schwarzer, Knut"},{"last_name":"Wilhelm","id":"12013","full_name":"Wilhelm, Patrick","first_name":"Patrick"},{"id":"12119","last_name":"Müller","first_name":"Ulrich","full_name":"Müller, Ulrich"},{"full_name":"Ollesch, K.","first_name":"K.","last_name":"Ollesch"},{"first_name":"T.","full_name":"Schiller, T.","last_name":"Schiller"}]},{"conference":{"location":"Lemgo","name":"GDL-Kongress Lebensmitteltechnologie","end_date":"2016-10-22","start_date":"2016-10-20"},"department":[{"_id":"DEP4023"},{"_id":"DEP4026"},{"_id":"DEP4018"}],"author":[{"first_name":"S.","full_name":"Walter, S.","last_name":"Walter"},{"first_name":"M.","last_name":"Steffens","full_name":"Steffens, M."},{"full_name":"Zapp, Jürgen","last_name":"Zapp","id":"12568","first_name":"Jürgen"},{"id":"13209","last_name":"Schneider","first_name":"Jan","full_name":"Schneider, Jan","orcid":"0000-0001-6401-8873"}],"year":"2016","status":"public","title":"Stabilität von mit funktionellen Caseinhydrolysaten angereicherten fruchtsafthaltigen Getränken ","publication_status":"published","citation":{"chicago-de":"Walter, S., M. Steffens, Jürgen Zapp und Jan Schneider. 2016. Stabilität von mit funktionellen Caseinhydrolysaten angereicherten fruchtsafthaltigen Getränken . In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016.","din1505-2-1":"Walter, S. ; Steffens, M. ; Zapp, Jürgen ; Schneider, Jan: Stabilität von mit funktionellen Caseinhydrolysaten angereicherten fruchtsafthaltigen Getränken . In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016","short":"S. Walter, M. Steffens, J. Zapp, J. Schneider, in: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","ufg":"Walter, S. u. a.: Stabilität von mit funktionellen Caseinhydrolysaten angereicherten fruchtsafthaltigen Getränken , in: o. Hg.: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, o. O. 2016.","bjps":"Walter S et al. (2016) Stabilität von mit funktionellen Caseinhydrolysaten angereicherten fruchtsafthaltigen Getränken . GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016.","mla":"Walter, S., et al. “Stabilität von mit funktionellen Caseinhydrolysaten angereicherten fruchtsafthaltigen Getränken .” GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","havard":"S. Walter, M. Steffens, J. Zapp, J. Schneider, Stabilität von mit funktionellen Caseinhydrolysaten angereicherten fruchtsafthaltigen Getränken , in: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","van":"Walter S, Steffens M, Zapp J, Schneider J. Stabilität von mit funktionellen Caseinhydrolysaten angereicherten fruchtsafthaltigen Getränken . In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20-22102016. 2016.","chicago":"Walter, S., M. Steffens, Jürgen Zapp, and Jan Schneider. “Stabilität von mit funktionellen Caseinhydrolysaten angereicherten fruchtsafthaltigen Getränken .” In GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","apa":"Walter, S., Steffens, M., Zapp, J., & Schneider, J. (2016). Stabilität von mit funktionellen Caseinhydrolysaten angereicherten fruchtsafthaltigen Getränken . GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016. GDL-Kongress Lebensmitteltechnologie, Lemgo.","ama":"Walter S, Steffens M, Zapp J, Schneider J. Stabilität von mit funktionellen Caseinhydrolysaten angereicherten fruchtsafthaltigen Getränken . In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016. ; 2016.","ieee":"S. Walter, M. Steffens, J. Zapp, and J. Schneider, “Stabilität von mit funktionellen Caseinhydrolysaten angereicherten fruchtsafthaltigen Getränken ,” presented at the GDL-Kongress Lebensmitteltechnologie, Lemgo, 2016."},"language":[{"iso":"ger"}],"_id":"5530","type":"conference","date_created":"2021-04-14T13:17:39Z","publication":"GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016","date_updated":"2024-05-22T09:52:18Z","user_id":"83779"},{"citation":{"ieee":"S. Rossmann, R. Kohlus, U. Müller, and J. Schneider, “Einfluss forcierter Lagerbedingungen auf die chemisch-physikalische Stabilität von Getränkeemulsionen,” presented at the GDL-Kongress Lebensmitteltechnologie, Lemgo, 2016.","ama":"Rossmann S, Kohlus R, Müller U, Schneider J. Einfluss forcierter Lagerbedingungen auf die chemisch-physikalische Stabilität von Getränkeemulsionen. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016. ; 2016.","din1505-2-1":"Rossmann, S. ; Kohlus, R. ; Müller, Ulrich ; Schneider, Jan: Einfluss forcierter Lagerbedingungen auf die chemisch-physikalische Stabilität von Getränkeemulsionen. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016","chicago-de":"Rossmann, S., R. Kohlus, Ulrich Müller und Jan Schneider. 2016. Einfluss forcierter Lagerbedingungen auf die chemisch-physikalische Stabilität von Getränkeemulsionen. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016.","short":"S. Rossmann, R. Kohlus, U. Müller, J. Schneider, in: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","chicago":"Rossmann, S., R. Kohlus, Ulrich Müller, and Jan Schneider. “Einfluss forcierter Lagerbedingungen auf die chemisch-physikalische Stabilität von Getränkeemulsionen.” In GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","apa":"Rossmann, S., Kohlus, R., Müller, U., & Schneider, J. (2016). Einfluss forcierter Lagerbedingungen auf die chemisch-physikalische Stabilität von Getränkeemulsionen. GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016. GDL-Kongress Lebensmitteltechnologie, Lemgo.","mla":"Rossmann, S., et al. “Einfluss forcierter Lagerbedingungen auf die chemisch-physikalische Stabilität von Getränkeemulsionen.” GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","bjps":"Rossmann S et al. (2016) Einfluss forcierter Lagerbedingungen auf die chemisch-physikalische Stabilität von Getränkeemulsionen. GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016.","havard":"S. Rossmann, R. Kohlus, U. Müller, J. Schneider, Einfluss forcierter Lagerbedingungen auf die chemisch-physikalische Stabilität von Getränkeemulsionen, in: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","ufg":"Rossmann, S. u. a.: Einfluss forcierter Lagerbedingungen auf die chemisch-physikalische Stabilität von Getränkeemulsionen, in: o. Hg.: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, o. O. 2016.","van":"Rossmann S, Kohlus R, Müller U, Schneider J. Einfluss forcierter Lagerbedingungen auf die chemisch-physikalische Stabilität von Getränkeemulsionen. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20-22102016. 2016."},"publication_status":"published","title":"Einfluss forcierter Lagerbedingungen auf die chemisch-physikalische Stabilität von Getränkeemulsionen","status":"public","year":"2016","author":[{"first_name":"S.","last_name":"Rossmann","full_name":"Rossmann, S."},{"first_name":"R.","last_name":"Kohlus","full_name":"Kohlus, R."},{"first_name":"Ulrich","last_name":"Müller","full_name":"Müller, Ulrich","id":"12119"},{"id":"13209","full_name":"Schneider, Jan","last_name":"Schneider","first_name":"Jan","orcid":"0000-0001-6401-8873"}],"department":[{"_id":"DEP4023"},{"_id":"DEP4009"},{"_id":"DEP4018"}],"conference":{"start_date":"2016-10-20","end_date":"2016-10-22","location":"Lemgo","name":"GDL-Kongress Lebensmitteltechnologie"},"user_id":"83779","date_updated":"2024-05-22T09:52:57Z","publication":"GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016","date_created":"2021-04-14T13:17:39Z","type":"conference","_id":"5531","language":[{"iso":"ger"}]},{"date_created":"2021-04-14T13:17:39Z","type":"conference","publication":"GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016","date_updated":"2024-05-22T09:53:33Z","user_id":"83779","language":[{"iso":"ger"}],"_id":"5532","title":"Pasteurisation von Obstkonserven - Auswirkung der Gebindeform, der Viskosität und der Stückigkeit des Pasteurisationsgutes auf die tatsächlich applizierten Pasteurisationseinheiten","publication_status":"published","citation":{"havard":"K. Schwarzer, S. Gerke, V. Wolff, J. Schneider, Pasteurisation von Obstkonserven - Auswirkung der Gebindeform, der Viskosität und der Stückigkeit des Pasteurisationsgutes auf die tatsächlich applizierten Pasteurisationseinheiten, in: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","mla":"Schwarzer, Knut, et al. “Pasteurisation von Obstkonserven - Auswirkung der Gebindeform, der Viskosität und der Stückigkeit des Pasteurisationsgutes auf die tatsächlich applizierten Pasteurisationseinheiten.” GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","bjps":"Schwarzer K et al. (2016) Pasteurisation von Obstkonserven - Auswirkung der Gebindeform, der Viskosität und der Stückigkeit des Pasteurisationsgutes auf die tatsächlich applizierten Pasteurisationseinheiten. GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016.","ufg":"Schwarzer, Knut u. a.: Pasteurisation von Obstkonserven - Auswirkung der Gebindeform, der Viskosität und der Stückigkeit des Pasteurisationsgutes auf die tatsächlich applizierten Pasteurisationseinheiten, in: o. Hg.: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, o. O. 2016.","van":"Schwarzer K, Gerke S, Wolff V, Schneider J. Pasteurisation von Obstkonserven - Auswirkung der Gebindeform, der Viskosität und der Stückigkeit des Pasteurisationsgutes auf die tatsächlich applizierten Pasteurisationseinheiten. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20-22102016. 2016.","chicago":"Schwarzer, Knut, S. Gerke, V. Wolff, and Jan Schneider. “Pasteurisation von Obstkonserven - Auswirkung der Gebindeform, der Viskosität und der Stückigkeit des Pasteurisationsgutes auf die tatsächlich applizierten Pasteurisationseinheiten.” In GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","apa":"Schwarzer, K., Gerke, S., Wolff, V., & Schneider, J. (2016). Pasteurisation von Obstkonserven - Auswirkung der Gebindeform, der Viskosität und der Stückigkeit des Pasteurisationsgutes auf die tatsächlich applizierten Pasteurisationseinheiten. GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016. GDL-Kongress Lebensmitteltechnologie, Lemgo.","chicago-de":"Schwarzer, Knut, S. Gerke, V. Wolff und Jan Schneider. 2016. Pasteurisation von Obstkonserven - Auswirkung der Gebindeform, der Viskosität und der Stückigkeit des Pasteurisationsgutes auf die tatsächlich applizierten Pasteurisationseinheiten. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016.","din1505-2-1":"Schwarzer, Knut ; Gerke, S. ; Wolff, V. ; Schneider, Jan: Pasteurisation von Obstkonserven - Auswirkung der Gebindeform, der Viskosität und der Stückigkeit des Pasteurisationsgutes auf die tatsächlich applizierten Pasteurisationseinheiten. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016","short":"K. Schwarzer, S. Gerke, V. Wolff, J. Schneider, in: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","ama":"Schwarzer K, Gerke S, Wolff V, Schneider J. Pasteurisation von Obstkonserven - Auswirkung der Gebindeform, der Viskosität und der Stückigkeit des Pasteurisationsgutes auf die tatsächlich applizierten Pasteurisationseinheiten. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016. ; 2016.","ieee":"K. Schwarzer, S. Gerke, V. Wolff, and J. Schneider, “Pasteurisation von Obstkonserven - Auswirkung der Gebindeform, der Viskosität und der Stückigkeit des Pasteurisationsgutes auf die tatsächlich applizierten Pasteurisationseinheiten,” presented at the GDL-Kongress Lebensmitteltechnologie, Lemgo, 2016."},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"},{"_id":"DEP4018"}],"conference":{"start_date":"2016-10-20","end_date":"2016-10-22","location":"Lemgo","name":"GDL-Kongress Lebensmitteltechnologie"},"year":"2016","author":[{"first_name":"Knut","full_name":"Schwarzer, Knut","id":"13329","last_name":"Schwarzer"},{"last_name":"Gerke","first_name":"S.","full_name":"Gerke, S."},{"last_name":"Wolff","full_name":"Wolff, V.","first_name":"V."},{"orcid":"0000-0001-6401-8873","first_name":"Jan","id":"13209","last_name":"Schneider","full_name":"Schneider, Jan"}],"status":"public"},{"status":"public","author":[{"last_name":"Nolte","first_name":"Timo","full_name":"Nolte, Timo","id":"77670"},{"last_name":"Wittkötter","first_name":"K.","full_name":"Wittkötter, K."},{"first_name":"Jürgen","last_name":"Zapp","full_name":"Zapp, Jürgen","id":"12568"}],"year":"2016","conference":{"start_date":"2016-10-20","end_date":"2016-10-22","location":"Lemgo","name":"GDL-Kongress Lebensmitteltechnologie"},"department":[{"_id":"DEP4023"},{"_id":"DEP4026"}],"citation":{"short":"T. Nolte, K. Wittkötter, J. Zapp, in: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","chicago-de":"Nolte, Timo, K. Wittkötter und Jürgen Zapp. 2016. Fehlaromen in der Eberfleischproduktion - Aktuelle Erkenntnisse. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016.","din1505-2-1":"Nolte, Timo ; Wittkötter, K. ; Zapp, Jürgen: Fehlaromen in der Eberfleischproduktion - Aktuelle Erkenntnisse. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016","van":"Nolte T, Wittkötter K, Zapp J. Fehlaromen in der Eberfleischproduktion - Aktuelle Erkenntnisse. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20-22102016. 2016.","havard":"T. Nolte, K. Wittkötter, J. Zapp, Fehlaromen in der Eberfleischproduktion - Aktuelle Erkenntnisse, in: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","mla":"Nolte, Timo, et al. “Fehlaromen in der Eberfleischproduktion - Aktuelle Erkenntnisse.” GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","bjps":"Nolte T, Wittkötter K and Zapp J (2016) Fehlaromen in der Eberfleischproduktion - Aktuelle Erkenntnisse. GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016.","ufg":"Nolte, Timo/Wittkötter, K./Zapp, Jürgen: Fehlaromen in der Eberfleischproduktion - Aktuelle Erkenntnisse, in: o. Hg.: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, o. O. 2016.","apa":"Nolte, T., Wittkötter, K., & Zapp, J. (2016). Fehlaromen in der Eberfleischproduktion - Aktuelle Erkenntnisse. GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016. GDL-Kongress Lebensmitteltechnologie, Lemgo.","chicago":"Nolte, Timo, K. Wittkötter, and Jürgen Zapp. “Fehlaromen in der Eberfleischproduktion - Aktuelle Erkenntnisse.” In GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","ama":"Nolte T, Wittkötter K, Zapp J. Fehlaromen in der Eberfleischproduktion - Aktuelle Erkenntnisse. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016. ; 2016.","ieee":"T. Nolte, K. Wittkötter, and J. Zapp, “Fehlaromen in der Eberfleischproduktion - Aktuelle Erkenntnisse,” presented at the GDL-Kongress Lebensmitteltechnologie, Lemgo, 2016."},"publication_status":"published","title":"Fehlaromen in der Eberfleischproduktion - Aktuelle Erkenntnisse","_id":"5533","language":[{"iso":"ger"}],"user_id":"83778","date_updated":"2024-04-29T10:32:42Z","publication":"GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016","type":"conference","date_created":"2021-04-14T13:17:39Z"},{"language":[{"iso":"ger"}],"_id":"5534","type":"conference","date_created":"2021-04-14T13:17:39Z","publication":"GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016","date_updated":"2024-04-29T10:33:30Z","user_id":"83778","department":[{"_id":"DEP4023"},{"_id":"DEP4026"}],"conference":{"location":"Lemgo","name":"GDL-Kongress Lebensmitteltechnologie","end_date":"2016-10-22","start_date":"2016-10-20"},"author":[{"last_name":"Westerholt","full_name":"Westerholt, J.","first_name":"J."},{"full_name":"Zapp, Jürgen","id":"12568","last_name":"Zapp","first_name":"Jürgen"}],"year":"2016","status":"public","title":"Einfluss des Röstverfahrens auf die Bekömmlichkeit von Kaffee unter besonderer Berücksichtigung organischer Säuren","publication_status":"published","citation":{"short":"J. Westerholt, J. Zapp, in: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","din1505-2-1":"Westerholt, J. ; Zapp, Jürgen: Einfluss des Röstverfahrens auf die Bekömmlichkeit von Kaffee unter besonderer Berücksichtigung organischer Säuren. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016","chicago-de":"Westerholt, J. und Jürgen Zapp. 2016. Einfluss des Röstverfahrens auf die Bekömmlichkeit von Kaffee unter besonderer Berücksichtigung organischer Säuren. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016.","apa":"Westerholt, J., & Zapp, J. (2016). Einfluss des Röstverfahrens auf die Bekömmlichkeit von Kaffee unter besonderer Berücksichtigung organischer Säuren. GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016. GDL-Kongress Lebensmitteltechnologie, Lemgo.","chicago":"Westerholt, J., and Jürgen Zapp. “Einfluss des Röstverfahrens auf die Bekömmlichkeit von Kaffee unter besonderer Berücksichtigung organischer Säuren.” In GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","van":"Westerholt J, Zapp J. Einfluss des Röstverfahrens auf die Bekömmlichkeit von Kaffee unter besonderer Berücksichtigung organischer Säuren. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20-22102016. 2016.","ufg":"Westerholt, J./Zapp, Jürgen: Einfluss des Röstverfahrens auf die Bekömmlichkeit von Kaffee unter besonderer Berücksichtigung organischer Säuren, in: o. Hg.: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, o. O. 2016.","mla":"Westerholt, J., and Jürgen Zapp. “Einfluss des Röstverfahrens auf die Bekömmlichkeit von Kaffee unter besonderer Berücksichtigung organischer Säuren.” GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","bjps":"Westerholt J and Zapp J (2016) Einfluss des Röstverfahrens auf die Bekömmlichkeit von Kaffee unter besonderer Berücksichtigung organischer Säuren. GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016.","havard":"J. Westerholt, J. Zapp, Einfluss des Röstverfahrens auf die Bekömmlichkeit von Kaffee unter besonderer Berücksichtigung organischer Säuren, in: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016, 2016.","ieee":"J. Westerholt and J. Zapp, “Einfluss des Röstverfahrens auf die Bekömmlichkeit von Kaffee unter besonderer Berücksichtigung organischer Säuren,” presented at the GDL-Kongress Lebensmitteltechnologie, Lemgo, 2016.","ama":"Westerholt J, Zapp J. Einfluss des Röstverfahrens auf die Bekömmlichkeit von Kaffee unter besonderer Berücksichtigung organischer Säuren. In: GDL-Kongress Lebensmitteltechnologie (Vortrag und Tagungsbandbeitrag), Lemgo, 20.-22.10.2016. ; 2016."}},{"oa":"1","place":"Dortmund","language":[{"iso":"eng"}],"_id":"2123","doi":"10.5445/KSP/1000049620","publication":"25. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA)","type":"conference","date_created":"2019-12-03T13:49:19Z","user_id":"68554","date_updated":"2023-03-15T13:49:38Z","author":[{"last_name":"Deppe","first_name":"Sahar","full_name":"Deppe, Sahar","id":"52121"},{"orcid":"0000-0002-3325-7887","id":"1804","last_name":"Lohweg","full_name":"Lohweg, Volker","first_name":"Volker"}],"main_file_link":[{"url":"https://publikationen.bibliothek.kit.edu/1000049620","open_access":"1"}],"year":2015,"department":[{"_id":"DEP5023"}],"abstract":[{"text":"The means of data mining and machine learning tasks are important topics in signal processing fundamentals. An example of such tasks is motif discovery. This paper presents an efficient method for shift-invariant feature\r\nextraction in time-series motif discovery. The proposed method initiates from the machine learning procedure and tackles the drawbacks of existing methods. Moreover, the efficacy of the novel approach is benchmarked\r\nagainst various algorithms and data from diverse fields.\r\n","lang":"eng"}],"status":"public","page":"23-45","title":"Shift-Invariant Feature Extraction for Time-Series Motif Discovery","citation":{"ama":"Deppe S, Lohweg V. Shift-Invariant Feature Extraction for Time-Series Motif Discovery. In: 25. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- Und Automatisierungstechnik (GMA). Dortmund; 2015:23-45. doi:10.5445/KSP/1000049620","ieee":"S. Deppe and V. Lohweg, “Shift-Invariant Feature Extraction for Time-Series Motif Discovery,” in 25. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 2015, pp. 23–45.","short":"S. Deppe, V. Lohweg, in: 25. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- Und Automatisierungstechnik (GMA), Dortmund, 2015, pp. 23–45.","din1505-2-1":"Deppe, Sahar ; Lohweg, Volker: Shift-Invariant Feature Extraction for Time-Series Motif Discovery. In: 25. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA). Dortmund, 2015, S. 23–45","chicago-de":"Deppe, Sahar und Volker Lohweg. 2015. Shift-Invariant Feature Extraction for Time-Series Motif Discovery. In: 25. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 23–45. Dortmund. doi:10.5445/KSP/1000049620, .","van":"Deppe S, Lohweg V. Shift-Invariant Feature Extraction for Time-Series Motif Discovery. In: 25 Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA). Dortmund; 2015. p. 23–45.","mla":"Deppe, Sahar, and Volker Lohweg. “Shift-Invariant Feature Extraction for Time-Series Motif Discovery.” 25. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- Und Automatisierungstechnik (GMA), 2015, pp. 23–45, doi:10.5445/KSP/1000049620.","bjps":"Deppe S and Lohweg V (2015) Shift-Invariant Feature Extraction for Time-Series Motif Discovery. 25. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- Und Automatisierungstechnik (GMA). Dortmund, pp. 23–45.","havard":"S. Deppe, V. Lohweg, Shift-Invariant Feature Extraction for Time-Series Motif Discovery, in: 25. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- Und Automatisierungstechnik (GMA), Dortmund, 2015: pp. 23–45.","ufg":"Deppe, Sahar/Lohweg, Volker (2015): Shift-Invariant Feature Extraction for Time-Series Motif Discovery, in: 25. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), Dortmund, S. 23–45.","apa":"Deppe, S., & Lohweg, V. (2015). Shift-Invariant Feature Extraction for Time-Series Motif Discovery. In 25. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA) (pp. 23–45). Dortmund. https://doi.org/10.5445/KSP/1000049620","chicago":"Deppe, Sahar, and Volker Lohweg. “Shift-Invariant Feature Extraction for Time-Series Motif Discovery.” In 25. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- Und Automatisierungstechnik (GMA), 23–45. Dortmund, 2015. https://doi.org/10.5445/KSP/1000049620."}},{"department":[{"_id":"DEP5023"}],"author":[{"last_name":"Bator","first_name":"Martyna","full_name":"Bator, Martyna","id":"46440"},{"last_name":"Deppe","first_name":"Sahar","id":"52121","full_name":"Deppe, Sahar"},{"orcid":"0000-0002-3325-7887","id":"1804","first_name":"Volker","last_name":"Lohweg","full_name":"Lohweg, Volker"}],"year":2015,"main_file_link":[{"url":"https://www.researchgate.net/publication/281933251_Relevanzbewertung_technischer_Informationen_mittels_Data-Mining_Verfahren_am_Anwendungsfall_von_Patentdokumenten","open_access":"1"}],"abstract":[{"text":"Patente schützen das geistige Eigentum von Erfindern und verhindern, dass ihre neuen Ideen kopiert werden. Sie sind von großer Bedeutung für den wirtschaftlichen Erfolg eines Unternehmens. Vor einer geplanten Patentanmeldung ist es wichtig festzustellen, ob eine bestimmte Technik bereits patentiert ist und wie die Erfolgsaussichten beurteilt werden können. Aber auch die Identifizierung von Verstößen gegen eigene Patentanmeldungen ist für ein Unternehmen von äußerster Wichtigkeit. Verschiedene Techniken und Tools sind entwickelt worden, um Patentanalyse-Experten, Managern und Technologieämtern bei den unterschiedlichsten Anforderungen im Bezug auf eine Patentrecherche zu unterstützen.","lang":"ger"}],"status":"public","title":"Relevanzbewertung technischer Informationen mittels Data-Mining Verfahren am Anwendungsfall von Patentdokumenten","citation":{"ieee":"M. Bator, S. Deppe, and V. Lohweg, “Relevanzbewertung technischer Informationen mittels Data-Mining Verfahren am Anwendungsfall von Patentdokumenten,” in 25. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 2015.","ama":"Bator M, Deppe S, Lohweg V. Relevanzbewertung technischer Informationen mittels Data-Mining Verfahren am Anwendungsfall von Patentdokumenten. In: 25. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- Und Automatisierungstechnik (GMA). Dortmund; 2015.","apa":"Bator, M., Deppe, S., & Lohweg, V. (2015). Relevanzbewertung technischer Informationen mittels Data-Mining Verfahren am Anwendungsfall von Patentdokumenten. In 25. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA). Dortmund.","chicago":"Bator, Martyna, Sahar Deppe, and Volker Lohweg. “Relevanzbewertung Technischer Informationen Mittels Data-Mining Verfahren Am Anwendungsfall von Patentdokumenten.” In 25. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- Und Automatisierungstechnik (GMA). Dortmund, 2015.","van":"Bator M, Deppe S, Lohweg V. Relevanzbewertung technischer Informationen mittels Data-Mining Verfahren am Anwendungsfall von Patentdokumenten. In: 25 Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA). Dortmund; 2015.","ufg":"Bator, Martyna et. al. (2015): Relevanzbewertung technischer Informationen mittels Data-Mining Verfahren am Anwendungsfall von Patentdokumenten, in: 25. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), Dortmund.","havard":"M. Bator, S. Deppe, V. Lohweg, Relevanzbewertung technischer Informationen mittels Data-Mining Verfahren am Anwendungsfall von Patentdokumenten, in: 25. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- Und Automatisierungstechnik (GMA), Dortmund, 2015.","bjps":"Bator M, Deppe S and Lohweg V (2015) Relevanzbewertung Technischer Informationen Mittels Data-Mining Verfahren Am Anwendungsfall von Patentdokumenten. 25. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- Und Automatisierungstechnik (GMA). Dortmund.","mla":"Bator, Martyna, et al. “Relevanzbewertung Technischer Informationen Mittels Data-Mining Verfahren Am Anwendungsfall von Patentdokumenten.” 25. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- Und Automatisierungstechnik (GMA), 2015.","short":"M. Bator, S. Deppe, V. Lohweg, in: 25. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- Und Automatisierungstechnik (GMA), Dortmund, 2015.","chicago-de":"Bator, Martyna, Sahar Deppe und Volker Lohweg. 2015. Relevanzbewertung technischer Informationen mittels Data-Mining Verfahren am Anwendungsfall von Patentdokumenten. In: 25. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA). Dortmund.","din1505-2-1":"Bator, Martyna ; Deppe, Sahar ; Lohweg, Volker: Relevanzbewertung technischer Informationen mittels Data-Mining Verfahren am Anwendungsfall von Patentdokumenten. In: 25. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA). Dortmund, 2015"},"oa":"1","language":[{"iso":"eng"}],"place":"Dortmund","_id":"2124","type":"conference","date_created":"2019-12-03T13:59:40Z","publication":"25. Workshop Computational Intelligence VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA)","date_updated":"2023-03-15T13:49:38Z","user_id":"68554"},{"citation":{"din1505-2-1":"Deppe, Sahar ; Dörksen, Helene ; Lohweg, Volker: Multi-Scale Motif Discovery in Image Processing. In: Workshop on Probabilistic Graphical Models. Heidelberg, Germany, 2015","chicago-de":"Deppe, Sahar, Helene Dörksen und Volker Lohweg. 2015. Multi-Scale Motif Discovery in Image Processing. In: Workshop on Probabilistic Graphical Models. Heidelberg, Germany.","short":"S. Deppe, H. Dörksen, V. Lohweg, in: Workshop on Probabilistic Graphical Models, Heidelberg, Germany, 2015.","ufg":"Deppe, Sahar et. al. (2015): Multi-Scale Motif Discovery in Image Processing, in: Workshop on Probabilistic Graphical Models, Heidelberg, Germany.","bjps":"Deppe S, Dörksen H and Lohweg V (2015) Multi-Scale Motif Discovery in Image Processing. Workshop on Probabilistic Graphical Models. Heidelberg, Germany.","mla":"Deppe, Sahar, et al. “Multi-Scale Motif Discovery in Image Processing.” Workshop on Probabilistic Graphical Models, 2015.","havard":"S. Deppe, H. Dörksen, V. Lohweg, Multi-Scale Motif Discovery in Image Processing, in: Workshop on Probabilistic Graphical Models, Heidelberg, Germany, 2015.","van":"Deppe S, Dörksen H, Lohweg V. Multi-Scale Motif Discovery in Image Processing. In: Workshop on Probabilistic Graphical Models. Heidelberg, Germany; 2015.","chicago":"Deppe, Sahar, Helene Dörksen, and Volker Lohweg. “Multi-Scale Motif Discovery in Image Processing.” In Workshop on Probabilistic Graphical Models. Heidelberg, Germany, 2015.","apa":"Deppe, S., Dörksen, H., & Lohweg, V. (2015). Multi-Scale Motif Discovery in Image Processing. In Workshop on Probabilistic Graphical Models. Heidelberg, Germany.","ama":"Deppe S, Dörksen H, Lohweg V. Multi-Scale Motif Discovery in Image Processing. In: Workshop on Probabilistic Graphical Models. Heidelberg, Germany; 2015.","ieee":"S. Deppe, H. Dörksen, and V. Lohweg, “Multi-Scale Motif Discovery in Image Processing,” in Workshop on Probabilistic Graphical Models, 2015."},"title":"Multi-Scale Motif Discovery in Image Processing","status":"public","main_file_link":[{"url":"https://www.researchgate.net/publication/283481666_Multi-Scale_Motif_Discovery_in_Image_Processing","open_access":"1"}],"author":[{"first_name":"Sahar","last_name":"Deppe","id":"52121","full_name":"Deppe, Sahar"},{"first_name":"Helene","id":"46416","full_name":"Dörksen, Helene","last_name":"Dörksen"},{"orcid":"0000-0002-3325-7887","first_name":"Volker","last_name":"Lohweg","id":"1804","full_name":"Lohweg, Volker"}],"year":2015,"department":[{"_id":"DEP5023"}],"user_id":"68554","date_updated":"2023-03-15T13:49:38Z","publication":"Workshop on Probabilistic Graphical Models","type":"conference_abstract","date_created":"2019-12-03T14:02:21Z","place":"Heidelberg, Germany","language":[{"iso":"eng"}],"_id":"2125","oa":"1"},{"department":[{"_id":"DEP5023"}],"year":2015,"author":[{"orcid":"0000-0002-3325-7887","first_name":"Volker","last_name":"Lohweg","full_name":"Lohweg, Volker","id":"1804"},{"last_name":"Knobloch","first_name":"Alexander","full_name":"Knobloch, Alexander"}],"status":"public","title":"Intelligente Technische Systeme für Industrie 4.0 in der Praxis","citation":{"short":"V. Lohweg, A. Knobloch, in: Industrie 4.0 Big Data Symposium Für Datengestützte Produktion Logistik (Eingeladener Vortrag), Connected Industry e.V., München, 2015.","din1505-2-1":"Lohweg, Volker ; Knobloch, Alexander: Intelligente Technische Systeme für Industrie 4.0 in der Praxis. In: Industrie 4.0 Big Data Symposium für datengestützte Produktion Logistik (Eingeladener Vortrag). Connected Industry e.V., München, 2015","chicago-de":"Lohweg, Volker und Alexander Knobloch. 2015. Intelligente Technische Systeme für Industrie 4.0 in der Praxis. In: Industrie 4.0 Big Data Symposium für datengestützte Produktion Logistik (Eingeladener Vortrag). Connected Industry e.V., München.","van":"Lohweg V, Knobloch A. Intelligente Technische Systeme für Industrie 4.0 in der Praxis. In: Industrie 40 Big Data Symposium für datengestützte Produktion Logistik (Eingeladener Vortrag). Connected Industry e.V., München; 2015.","ama":"Lohweg V, Knobloch A. Intelligente Technische Systeme für Industrie 4.0 in der Praxis. In: Industrie 4.0 Big Data Symposium Für Datengestützte Produktion Logistik (Eingeladener Vortrag). Connected Industry e.V., München; 2015.","ufg":"Lohweg, Volker/Knobloch, Alexander (2015): Intelligente Technische Systeme für Industrie 4.0 in der Praxis, in: Industrie 4.0 Big Data Symposium für datengestützte Produktion Logistik (Eingeladener Vortrag), Connected Industry e.V., München.","havard":"V. Lohweg, A. Knobloch, Intelligente Technische Systeme für Industrie 4.0 in der Praxis, in: Industrie 4.0 Big Data Symposium Für Datengestützte Produktion Logistik (Eingeladener Vortrag), Connected Industry e.V., München, 2015.","mla":"Lohweg, Volker, and Alexander Knobloch. “Intelligente Technische Systeme Für Industrie 4.0 in Der Praxis.” Industrie 4.0 Big Data Symposium Für Datengestützte Produktion Logistik (Eingeladener Vortrag), 2015.","bjps":"Lohweg V and Knobloch A (2015) Intelligente Technische Systeme Für Industrie 4.0 in Der Praxis. Industrie 4.0 Big Data Symposium Für Datengestützte Produktion Logistik (Eingeladener Vortrag). Connected Industry e.V., München.","apa":"Lohweg, V., & Knobloch, A. (2015). Intelligente Technische Systeme für Industrie 4.0 in der Praxis. In Industrie 4.0 Big Data Symposium für datengestützte Produktion Logistik (Eingeladener Vortrag). Connected Industry e.V., München.","ieee":"V. Lohweg and A. Knobloch, “Intelligente Technische Systeme für Industrie 4.0 in der Praxis,” in Industrie 4.0 Big Data Symposium für datengestützte Produktion Logistik (Eingeladener Vortrag), 2015.","chicago":"Lohweg, Volker, and Alexander Knobloch. “Intelligente Technische Systeme Für Industrie 4.0 in Der Praxis.” In Industrie 4.0 Big Data Symposium Für Datengestützte Produktion Logistik (Eingeladener Vortrag). Connected Industry e.V., München, 2015."},"language":[{"iso":"eng"}],"place":"Connected Industry e.V., München","_id":"2126","type":"conference","date_created":"2019-12-04T09:02:16Z","publication":"Industrie 4.0 Big Data Symposium für datengestützte Produktion Logistik (Eingeladener Vortrag)","date_updated":"2023-03-15T13:49:38Z","user_id":"68554"},{"title":"Industrie 4.0 aus Sicht des CIIT","citation":{"chicago-de":"Lohweg, Volker. 2015. Industrie 4.0 aus Sicht des CIIT. In: IT InnovationsCluster Göttingen/Südniedersachsen (Eingeladener Vortrag). GWG Gesellschaft für Wirtschaftsförderung, Göttingen.","din1505-2-1":"Lohweg, Volker: Industrie 4.0 aus Sicht des CIIT. In: IT InnovationsCluster Göttingen/Südniedersachsen (Eingeladener Vortrag). GWG Gesellschaft für Wirtschaftsförderung, Göttingen, 2015","short":"V. Lohweg, in: IT InnovationsCluster Göttingen/Südniedersachsen (Eingeladener Vortrag), GWG Gesellschaft für Wirtschaftsförderung, Göttingen, 2015.","chicago":"Lohweg, Volker. “Industrie 4.0 Aus Sicht Des CIIT.” In IT InnovationsCluster Göttingen/Südniedersachsen (Eingeladener Vortrag). GWG Gesellschaft für Wirtschaftsförderung, Göttingen, 2015.","ieee":"V. Lohweg, “Industrie 4.0 aus Sicht des CIIT,” in IT InnovationsCluster Göttingen/Südniedersachsen (Eingeladener Vortrag), 2015.","apa":"Lohweg, V. (2015). Industrie 4.0 aus Sicht des CIIT. In IT InnovationsCluster Göttingen/Südniedersachsen (Eingeladener Vortrag). GWG Gesellschaft für Wirtschaftsförderung, Göttingen.","mla":"Lohweg, Volker. “Industrie 4.0 Aus Sicht Des CIIT.” IT InnovationsCluster Göttingen/Südniedersachsen (Eingeladener Vortrag), 2015.","havard":"V. Lohweg, Industrie 4.0 aus Sicht des CIIT, in: IT InnovationsCluster Göttingen/Südniedersachsen (Eingeladener Vortrag), GWG Gesellschaft für Wirtschaftsförderung, Göttingen, 2015.","bjps":"Lohweg V (2015) Industrie 4.0 Aus Sicht Des CIIT. IT InnovationsCluster Göttingen/Südniedersachsen (Eingeladener Vortrag). GWG Gesellschaft für Wirtschaftsförderung, Göttingen.","ufg":"Lohweg, Volker (2015): Industrie 4.0 aus Sicht des CIIT, in: IT InnovationsCluster Göttingen/Südniedersachsen (Eingeladener Vortrag), GWG Gesellschaft für Wirtschaftsförderung, Göttingen.","ama":"Lohweg V. Industrie 4.0 aus Sicht des CIIT. In: IT InnovationsCluster Göttingen/Südniedersachsen (Eingeladener Vortrag). GWG Gesellschaft für Wirtschaftsförderung, Göttingen; 2015.","van":"Lohweg V. Industrie 4.0 aus Sicht des CIIT. In: IT InnovationsCluster Göttingen/Südniedersachsen (Eingeladener Vortrag). GWG Gesellschaft für Wirtschaftsförderung, Göttingen; 2015."},"author":[{"last_name":"Lohweg","first_name":"Volker","id":"1804","full_name":"Lohweg, Volker","orcid":"0000-0002-3325-7887"}],"year":2015,"department":[{"_id":"DEP5023"}],"status":"public","publication":"IT InnovationsCluster Göttingen/Südniedersachsen (Eingeladener Vortrag)","type":"conference","date_created":"2019-12-04T09:03:51Z","user_id":"68554","date_updated":"2023-03-15T13:49:38Z","place":"GWG Gesellschaft für Wirtschaftsförderung, Göttingen","language":[{"iso":"eng"}],"_id":"2127"},{"language":[{"iso":"eng"}],"place":"Fraunhofer Application Centre IOSB-INA, Lemgo","keyword":["Assistance System","Euler Number","Synchronous Motor","Image Processing System","Image Processing Method"],"doi":"10.1007/978-3-662-48838-6_8","_id":"2128","date_updated":"2023-03-15T13:49:38Z","user_id":"68554","date_created":"2019-12-04T09:04:50Z","type":"conference","publication":"Conference on Machine Learning for Cyber-Physical Systems (ML4CPS)","status":"public","department":[{"_id":"DEP5023"}],"main_file_link":[{"url":"https://link.springer.com/chapter/10.1007/978-3-662-48838-6_8"}],"year":2015,"author":[{"first_name":"Kristijan","last_name":"Vukovic","full_name":"Vukovic, Kristijan"},{"last_name":"Simonis","first_name":"Kristina","full_name":"Simonis, Kristina"},{"first_name":"Helene","last_name":"Dörksen","id":"46416","full_name":"Dörksen, Helene"},{"full_name":"Lohweg, Volker","first_name":"Volker","last_name":"Lohweg","id":"1804","orcid":"0000-0002-3325-7887"}],"abstract":[{"text":"We present the concept of a perceptive motor in terms of a cyber-physical system (CPS). A model application monitoring a knitting process was developed, where the take-off of the produced fabric is controlled by an electric motor. The idea is to equip a synchronous motor with a smart camera and appropriate image processing hard- and software components. Subsequently, the characteristics of knitted fabric are analysed by machine-learning (ML) methods. Our concept includes motor-current analysis and image processing. The aim is to implement an assistance system for the industrial large circular knitting process. An assistance system will help to shorten the retrofitting process. The concept is based on a low cost hardware approach for a smart camera, and stems from the recent development of image processing applications for mobile devices [1–4].","lang":"eng"}],"citation":{"short":"K. Vukovic, K. Simonis, H. Dörksen, V. Lohweg, in: Conference on Machine Learning for Cyber-Physical Systems (ML4CPS), Fraunhofer Application Centre IOSB-INA, Lemgo, 2015.","chicago-de":"Vukovic, Kristijan, Kristina Simonis, Helene Dörksen und Volker Lohweg. 2015. Efficient Image Processing System for an Industrial Machine Learning Task. In: Conference on Machine Learning for Cyber-Physical Systems (ML4CPS). Fraunhofer Application Centre IOSB-INA, Lemgo. doi:10.1007/978-3-662-48838-6_8, .","din1505-2-1":"Vukovic, Kristijan ; Simonis, Kristina ; Dörksen, Helene ; Lohweg, Volker: Efficient Image Processing System for an Industrial Machine Learning Task. In: Conference on Machine Learning for Cyber-Physical Systems (ML4CPS). Fraunhofer Application Centre IOSB-INA, Lemgo, 2015","van":"Vukovic K, Simonis K, Dörksen H, Lohweg V. Efficient Image Processing System for an Industrial Machine Learning Task. In: Conference on Machine Learning for Cyber-Physical Systems (ML4CPS). Fraunhofer Application Centre IOSB-INA, Lemgo; 2015.","ufg":"Vukovic, Kristijan et. al. (2015): Efficient Image Processing System for an Industrial Machine Learning Task, in: Conference on Machine Learning for Cyber-Physical Systems (ML4CPS), Fraunhofer Application Centre IOSB-INA, Lemgo.","mla":"Vukovic, Kristijan, et al. “Efficient Image Processing System for an Industrial Machine Learning Task.” Conference on Machine Learning for Cyber-Physical Systems (ML4CPS), 2015, doi:10.1007/978-3-662-48838-6_8.","havard":"K. Vukovic, K. Simonis, H. Dörksen, V. Lohweg, Efficient Image Processing System for an Industrial Machine Learning Task, in: Conference on Machine Learning for Cyber-Physical Systems (ML4CPS), Fraunhofer Application Centre IOSB-INA, Lemgo, 2015.","bjps":"Vukovic K et al. (2015) Efficient Image Processing System for an Industrial Machine Learning Task. Conference on Machine Learning for Cyber-Physical Systems (ML4CPS). Fraunhofer Application Centre IOSB-INA, Lemgo.","apa":"Vukovic, K., Simonis, K., Dörksen, H., & Lohweg, V. (2015). Efficient Image Processing System for an Industrial Machine Learning Task. In Conference on Machine Learning for Cyber-Physical Systems (ML4CPS). Fraunhofer Application Centre IOSB-INA, Lemgo. https://doi.org/10.1007/978-3-662-48838-6_8","chicago":"Vukovic, Kristijan, Kristina Simonis, Helene Dörksen, and Volker Lohweg. “Efficient Image Processing System for an Industrial Machine Learning Task.” In Conference on Machine Learning for Cyber-Physical Systems (ML4CPS). Fraunhofer Application Centre IOSB-INA, Lemgo, 2015. https://doi.org/10.1007/978-3-662-48838-6_8.","ama":"Vukovic K, Simonis K, Dörksen H, Lohweg V. Efficient Image Processing System for an Industrial Machine Learning Task. In: Conference on Machine Learning for Cyber-Physical Systems (ML4CPS). Fraunhofer Application Centre IOSB-INA, Lemgo; 2015. doi:10.1007/978-3-662-48838-6_8","ieee":"K. Vukovic, K. Simonis, H. Dörksen, and V. Lohweg, “Efficient Image Processing System for an Industrial Machine Learning Task,” in Conference on Machine Learning for Cyber-Physical Systems (ML4CPS), 2015."},"title":"Efficient Image Processing System for an Industrial Machine Learning Task"},{"volume":10,"citation":{"short":"J. Jasperneite, V. Lohweg, ETZ (2015) 10 (2015) 32-35d.","chicago-de":"Jasperneite, Jürgen und Volker Lohweg. 2015. Intelligente Vernetzung für die flexible Produktion von morgen. ETZ (2015) 10: 32-35d.","din1505-2-1":"Jasperneite, Jürgen ; Lohweg, Volker: Intelligente Vernetzung für die flexible Produktion von morgen. In: ETZ (2015) Bd. 10 (2015), S. 32-35d","van":"Jasperneite J, Lohweg V. Intelligente Vernetzung für die flexible Produktion von morgen. ETZ (2015). 2015;10:32-35d.","ufg":"Jasperneite, Jürgen/Lohweg, Volker (2015): Intelligente Vernetzung für die flexible Produktion von morgen, in: ETZ (2015) 10, S. 32-35d.","bjps":"Jasperneite J and Lohweg V (2015) Intelligente Vernetzung Für Die Flexible Produktion von Morgen. ETZ (2015) 10, 32-35d.","mla":"Jasperneite, Jürgen, and Volker Lohweg. “Intelligente Vernetzung Für Die Flexible Produktion von Morgen.” ETZ (2015), vol. 10, 2015, pp. 32-35d.","havard":"J. Jasperneite, V. Lohweg, Intelligente Vernetzung für die flexible Produktion von morgen, ETZ (2015). 10 (2015) 32-35d.","apa":"Jasperneite, J., & Lohweg, V. (2015). Intelligente Vernetzung für die flexible Produktion von morgen. ETZ (2015), 10, 32-35d.","chicago":"Jasperneite, Jürgen, and Volker Lohweg. “Intelligente Vernetzung Für Die Flexible Produktion von Morgen.” ETZ (2015) 10 (2015): 32-35d.","ama":"Jasperneite J, Lohweg V. Intelligente Vernetzung für die flexible Produktion von morgen. ETZ (2015). 2015;10:32-35d.","ieee":"J. Jasperneite and V. Lohweg, “Intelligente Vernetzung für die flexible Produktion von morgen,” ETZ (2015), vol. 10, pp. 32-35d, 2015."},"title":"Intelligente Vernetzung für die flexible Produktion von morgen","status":"public","page":"32 - 35d","author":[{"last_name":"Jasperneite","first_name":"Jürgen","full_name":"Jasperneite, Jürgen","id":"1899"},{"first_name":"Volker","id":"1804","full_name":"Lohweg, Volker","last_name":"Lohweg","orcid":"0000-0002-3325-7887"}],"year":2015,"department":[{"_id":"DEP5023"}],"user_id":"68554","date_updated":"2023-03-15T13:49:38Z","intvolume":" 10","publication":"ETZ (2015)","type":"journal_article","date_created":"2019-12-04T09:08:50Z","language":[{"iso":"eng"}],"_id":"2130"},{"date_created":"2019-12-04T09:10:15Z","type":"conference","publication":"2. QASS-Colloqium zur Qualitätssicherung (Eingeladener Vortrag)","date_updated":"2023-03-15T13:49:38Z","user_id":"68554","_id":"2131","language":[{"iso":"eng"}],"place":"Wetter(Ruhr)","title":"Industrie 4.0 und Informationsfusion - ein Überblick","citation":{"short":"V. Lohweg, in: 2. QASS-Colloqium Zur Qualitätssicherung (Eingeladener Vortrag), Wetter(Ruhr), 2015.","din1505-2-1":"Lohweg, Volker: Industrie 4.0 und Informationsfusion - ein Überblick. In: 2. QASS-Colloqium zur Qualitätssicherung (Eingeladener Vortrag). Wetter(Ruhr), 2015","chicago-de":"Lohweg, Volker. 2015. Industrie 4.0 und Informationsfusion - ein Überblick. In: 2. QASS-Colloqium zur Qualitätssicherung (Eingeladener Vortrag). Wetter(Ruhr).","apa":"Lohweg, V. (2015). Industrie 4.0 und Informationsfusion - ein Überblick. In 2. QASS-Colloqium zur Qualitätssicherung (Eingeladener Vortrag). Wetter(Ruhr).","chicago":"Lohweg, Volker. “Industrie 4.0 Und Informationsfusion - Ein Überblick.” In 2. QASS-Colloqium Zur Qualitätssicherung (Eingeladener Vortrag). Wetter(Ruhr), 2015.","van":"Lohweg V. Industrie 4.0 und Informationsfusion - ein Überblick. In: 2 QASS-Colloqium zur Qualitätssicherung (Eingeladener Vortrag). Wetter(Ruhr); 2015.","ufg":"Lohweg, Volker (2015): Industrie 4.0 und Informationsfusion - ein Überblick, in: 2. QASS-Colloqium zur Qualitätssicherung (Eingeladener Vortrag), Wetter(Ruhr).","bjps":"Lohweg V (2015) Industrie 4.0 Und Informationsfusion - Ein Überblick. 2. QASS-Colloqium Zur Qualitätssicherung (Eingeladener Vortrag). Wetter(Ruhr).","havard":"V. Lohweg, Industrie 4.0 und Informationsfusion - ein Überblick, in: 2. QASS-Colloqium Zur Qualitätssicherung (Eingeladener Vortrag), Wetter(Ruhr), 2015.","mla":"Lohweg, Volker. “Industrie 4.0 Und Informationsfusion - Ein Überblick.” 2. QASS-Colloqium Zur Qualitätssicherung (Eingeladener Vortrag), 2015.","ieee":"V. Lohweg, “Industrie 4.0 und Informationsfusion - ein Überblick,” in 2. QASS-Colloqium zur Qualitätssicherung (Eingeladener Vortrag), 2015.","ama":"Lohweg V. Industrie 4.0 und Informationsfusion - ein Überblick. In: 2. QASS-Colloqium Zur Qualitätssicherung (Eingeladener Vortrag). Wetter(Ruhr); 2015."},"department":[{"_id":"DEP5023"}],"year":2015,"author":[{"orcid":"0000-0002-3325-7887","last_name":"Lohweg","full_name":"Lohweg, Volker","first_name":"Volker","id":"1804"}],"status":"public"},{"status":"public","department":[{"_id":"DEP5023"}],"author":[{"first_name":"Alexander","id":"1853","last_name":"Dicks","full_name":"Dicks, Alexander"},{"id":"1804","first_name":"Volker","last_name":"Lohweg","full_name":"Lohweg, Volker","orcid":"0000-0002-3325-7887"},{"first_name":"Henrik","full_name":"Wittke, Henrik","last_name":"Wittke"},{"first_name":"Stefan","full_name":"Linke, Stefan","last_name":"Linke"}],"year":2015,"abstract":[{"text":"Due to the material changes of components from metal to plastic or composite materials, the structural health monitoring finds more and more interest in the industrial fields. The reason is that these materials are more vulnerable to damage or impacts which cannot be optically detected. In this contribution we present a method to analyze the structure of plastic components with piezo-electrical sensors and actuators. The components are stimulated by actuators, and sensors capture the injected vibrations. These signals are decomposed into Intrinsic Mode Functions to compute statistical features. A Fuzzy-Pattern-Classifier is applied to detect structural modifications at the components under test.","lang":"eng"}],"citation":{"ama":"Dicks A, Lohweg V, Wittke H, Linke S. Structural Health Monitoring of Plastic Components with Piezoelectric Sensors. In: 20th IEEE International Conference on Emerging Technologies and Factory Automation. Luxembourg; 2015. doi: 10.1109/ETFA.2015.7301595","ieee":"A. Dicks, V. Lohweg, H. Wittke, and S. Linke, “Structural Health Monitoring of Plastic Components with Piezoelectric Sensors,” in 20th IEEE International Conference on Emerging Technologies and Factory Automation, 2015.","van":"Dicks A, Lohweg V, Wittke H, Linke S. Structural Health Monitoring of Plastic Components with Piezoelectric Sensors. In: 20th IEEE International Conference on Emerging Technologies and Factory Automation. Luxembourg; 2015.","ufg":"Dicks, Alexander et. al. (2015): Structural Health Monitoring of Plastic Components with Piezoelectric Sensors, in: 20th IEEE International Conference on Emerging Technologies and Factory Automation, Luxembourg.","mla":"Dicks, Alexander, et al. “Structural Health Monitoring of Plastic Components with Piezoelectric Sensors.” 20th IEEE International Conference on Emerging Technologies and Factory Automation, 2015, doi: 10.1109/ETFA.2015.7301595.","bjps":"Dicks A et al. (2015) Structural Health Monitoring of Plastic Components with Piezoelectric Sensors. 20th IEEE International Conference on Emerging Technologies and Factory Automation. Luxembourg.","havard":"A. Dicks, V. Lohweg, H. Wittke, S. Linke, Structural Health Monitoring of Plastic Components with Piezoelectric Sensors, in: 20th IEEE International Conference on Emerging Technologies and Factory Automation, Luxembourg, 2015.","apa":"Dicks, A., Lohweg, V., Wittke, H., & Linke, S. (2015). Structural Health Monitoring of Plastic Components with Piezoelectric Sensors. In 20th IEEE International Conference on Emerging Technologies and Factory Automation. Luxembourg. https://doi.org/ 10.1109/ETFA.2015.7301595","chicago":"Dicks, Alexander, Volker Lohweg, Henrik Wittke, and Stefan Linke. “Structural Health Monitoring of Plastic Components with Piezoelectric Sensors.” In 20th IEEE International Conference on Emerging Technologies and Factory Automation. Luxembourg, 2015. https://doi.org/ 10.1109/ETFA.2015.7301595.","short":"A. Dicks, V. Lohweg, H. Wittke, S. Linke, in: 20th IEEE International Conference on Emerging Technologies and Factory Automation, Luxembourg, 2015.","din1505-2-1":"Dicks, Alexander ; Lohweg, Volker ; Wittke, Henrik ; Linke, Stefan: Structural Health Monitoring of Plastic Components with Piezoelectric Sensors. In: 20th IEEE International Conference on Emerging Technologies and Factory Automation. Luxembourg, 2015","chicago-de":"Dicks, Alexander, Volker Lohweg, Henrik Wittke und Stefan Linke. 2015. Structural Health Monitoring of Plastic Components with Piezoelectric Sensors. In: 20th IEEE International Conference on Emerging Technologies and Factory Automation. Luxembourg. doi: 10.1109/ETFA.2015.7301595, ."},"title":"Structural Health Monitoring of Plastic Components with Piezoelectric Sensors","language":[{"iso":"eng"}],"keyword":["Sensors","Actuators","Finite element analysis","Plastics","Modal analysis","Monitoring","Empirical mode decomposition"],"place":"Luxembourg","doi":" 10.1109/ETFA.2015.7301595","_id":"2133","date_updated":"2023-03-15T13:49:39Z","user_id":"68554","date_created":"2019-12-04T09:11:17Z","type":"conference","publication":"20th IEEE International Conference on Emerging Technologies and Factory Automation"},{"citation":{"ama":"Dörksen H, Lohweg V. Automated Fuzzy Classification with Combinatorial Refinement. In: 20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) Luxembourg, Sep 2015. . Luxembourg: IEEE; 2015. doi: 10.1109/ETFA.2015.7301514","ieee":"H. Dörksen and V. Lohweg, “Automated Fuzzy Classification with Combinatorial Refinement,” in 20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) Luxembourg, Sep 2015. , 2015.","ufg":"Dörksen, Helene/Lohweg, Volker (2015): Automated Fuzzy Classification with Combinatorial Refinement, in: 20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) Luxembourg, Sep 2015. , Luxembourg.","mla":"Dörksen, Helene, and Volker Lohweg. “Automated Fuzzy Classification with Combinatorial Refinement.” 20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) Luxembourg, Sep 2015. , IEEE, 2015, doi: 10.1109/ETFA.2015.7301514.","havard":"H. Dörksen, V. Lohweg, Automated Fuzzy Classification with Combinatorial Refinement, in: 20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) Luxembourg, Sep 2015. , IEEE, Luxembourg, 2015.","bjps":"Dörksen H and Lohweg V (2015) Automated Fuzzy Classification with Combinatorial Refinement. 20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) Luxembourg, Sep 2015. . Luxembourg: IEEE.","van":"Dörksen H, Lohweg V. Automated Fuzzy Classification with Combinatorial Refinement. In: 20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) Luxembourg, Sep 2015 . Luxembourg: IEEE; 2015.","chicago":"Dörksen, Helene, and Volker Lohweg. “Automated Fuzzy Classification with Combinatorial Refinement.” In 20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) Luxembourg, Sep 2015. . Luxembourg: IEEE, 2015. https://doi.org/ 10.1109/ETFA.2015.7301514.","apa":"Dörksen, H., & Lohweg, V. (2015). Automated Fuzzy Classification with Combinatorial Refinement. In 20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) Luxembourg, Sep 2015. . Luxembourg: IEEE. https://doi.org/ 10.1109/ETFA.2015.7301514","din1505-2-1":"Dörksen, Helene ; Lohweg, Volker: Automated Fuzzy Classification with Combinatorial Refinement. In: 20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) Luxembourg, Sep 2015. . Luxembourg : IEEE, 2015","chicago-de":"Dörksen, Helene und Volker Lohweg. 2015. Automated Fuzzy Classification with Combinatorial Refinement. In: 20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) Luxembourg, Sep 2015. . Luxembourg: IEEE. doi: 10.1109/ETFA.2015.7301514, .","short":"H. Dörksen, V. Lohweg, in: 20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) Luxembourg, Sep 2015. , IEEE, Luxembourg, 2015."},"title":"Automated Fuzzy Classification with Combinatorial Refinement","publisher":"IEEE","status":"public","abstract":[{"lang":"eng","text":"In modern industrial applications driven by Cyber-physical systems (CPS) it is a challenging task to model and optimize processes such as machine analysis and diagnosis. Since the CPS have to act autonomously, a procedure for automated decision making has to be designed. In our work we concentrate on the design of a decision procedure by a fuzzy classifier approach. For our application on decision making in an industrial environment, a fuzzy approach was picked as convenient classification technique regarding balance between accuracy and computational time. We present a supervised learning method called FUZZY-ComRef which combines fuzzy classification and our combinatorial refinement method, called ComRef [1]. Due to the fact that fuzzy classification might behave inaccurately for some datasets, the aim of our approach is to improve the results provided by the (stand-alone) fuzzy classification. We show the performance of FUZZY-ComRef evaluated on the samples from the UCI Repository and on our real-world dataset Motor Drive Diagnosis. In addition, we discuss the quadratic computational time problem arising from the combinatorial nature of ComRef. Furthermore, we show based on real-time evaluations that within parallelisation the proposed FUZZY-ComRef is suitable to many applications in CPS."}],"year":2015,"author":[{"full_name":"Dörksen, Helene","last_name":"Dörksen","id":"46416","first_name":"Helene"},{"id":"1804","last_name":"Lohweg","full_name":"Lohweg, Volker","first_name":"Volker","orcid":"0000-0002-3325-7887"}],"department":[{"_id":"DEP5023"}],"user_id":"68554","date_updated":"2023-03-15T13:49:39Z","publication_identifier":{"eisbn":[" 978-1-4673-7929-8"]},"publication":"20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) Luxembourg, Sep 2015. ","type":"conference","date_created":"2019-12-04T09:23:21Z","_id":"2136","doi":" 10.1109/ETFA.2015.7301514","keyword":["Support vector machines","Accuracy","Time complexity","Decision making","Motor drives","Shape","Sensors"],"place":"Luxembourg","language":[{"iso":"eng"}]},{"language":[{"iso":"eng"}],"place":"Campus Week 2015, Bundesdruckerei Berlin (eingeladener Vortrag)","_id":"2138","date_updated":"2023-03-15T13:49:39Z","user_id":"68554","date_created":"2019-12-04T09:26:34Z","type":"conference","status":"public","department":[{"_id":"DEP5023"}],"author":[{"orcid":"0000-0002-3325-7887","full_name":"Lohweg, Volker","id":"1804","first_name":"Volker","last_name":"Lohweg"}],"year":2015,"citation":{"chicago":"Lohweg, Volker. “Industrie 4.0 - Ein Überblick.” Campus Week 2015, Bundesdruckerei Berlin (eingeladener Vortrag), 2015.","apa":"Lohweg, V. (2015). Industrie 4.0 - Ein Überblick. Campus Week 2015, Bundesdruckerei Berlin (eingeladener Vortrag).","ieee":"V. Lohweg, “Industrie 4.0 - Ein Überblick,” 2015.","ufg":"Lohweg, Volker (2015): Industrie 4.0 - Ein Überblick, in: , Campus Week 2015, Bundesdruckerei Berlin (eingeladener Vortrag).","havard":"V. Lohweg, Industrie 4.0 - Ein Überblick, in: Campus Week 2015, Bundesdruckerei Berlin (eingeladener Vortrag), 2015.","bjps":"Lohweg V (2015) Industrie 4.0 - Ein Überblick. Campus Week 2015, Bundesdruckerei Berlin (eingeladener Vortrag).","mla":"Lohweg, Volker. Industrie 4.0 - Ein Überblick. 2015.","van":"Lohweg V. Industrie 4.0 - Ein Überblick. In Campus Week 2015, Bundesdruckerei Berlin (eingeladener Vortrag); 2015.","ama":"Lohweg V. Industrie 4.0 - Ein Überblick. In: Campus Week 2015, Bundesdruckerei Berlin (eingeladener Vortrag); 2015.","din1505-2-1":"Lohweg, Volker: Industrie 4.0 - Ein Überblick. In: . Campus Week 2015, Bundesdruckerei Berlin (eingeladener Vortrag), 2015","chicago-de":"Lohweg, Volker. 2015. Industrie 4.0 - Ein Überblick. In: . Campus Week 2015, Bundesdruckerei Berlin (eingeladener Vortrag).","short":"V. Lohweg, in: Campus Week 2015, Bundesdruckerei Berlin (eingeladener Vortrag), 2015."},"title":"Industrie 4.0 - Ein Überblick"},{"citation":{"short":"V. Lohweg, in: Campus Week 2015, Bundesdruckerei Berlin (eingeladener Vortrag), 2015.","chicago-de":"Lohweg, Volker. 2015. Banknotenauthentifikation auf Basis von Druckverfahren. In: . Campus Week 2015, Bundesdruckerei Berlin (eingeladener Vortrag).","din1505-2-1":"Lohweg, Volker: Banknotenauthentifikation auf Basis von Druckverfahren. In: . Campus Week 2015, Bundesdruckerei Berlin (eingeladener Vortrag), 2015","apa":"Lohweg, V. (2015). Banknotenauthentifikation auf Basis von Druckverfahren. Campus Week 2015, Bundesdruckerei Berlin (eingeladener Vortrag).","chicago":"Lohweg, Volker. “Banknotenauthentifikation Auf Basis von Druckverfahren.” Campus Week 2015, Bundesdruckerei Berlin (eingeladener Vortrag), 2015.","van":"Lohweg V. Banknotenauthentifikation auf Basis von Druckverfahren. In Campus Week 2015, Bundesdruckerei Berlin (eingeladener Vortrag); 2015.","ufg":"Lohweg, Volker (2015): Banknotenauthentifikation auf Basis von Druckverfahren, in: , Campus Week 2015, Bundesdruckerei Berlin (eingeladener Vortrag).","bjps":"Lohweg V (2015) Banknotenauthentifikation Auf Basis von Druckverfahren. Campus Week 2015, Bundesdruckerei Berlin (eingeladener Vortrag).","havard":"V. Lohweg, Banknotenauthentifikation auf Basis von Druckverfahren, in: Campus Week 2015, Bundesdruckerei Berlin (eingeladener Vortrag), 2015.","mla":"Lohweg, Volker. Banknotenauthentifikation Auf Basis von Druckverfahren. 2015.","ieee":"V. Lohweg, “Banknotenauthentifikation auf Basis von Druckverfahren,” 2015.","ama":"Lohweg V. Banknotenauthentifikation auf Basis von Druckverfahren. In: Campus Week 2015, Bundesdruckerei Berlin (eingeladener Vortrag); 2015."},"title":"Banknotenauthentifikation auf Basis von Druckverfahren","status":"public","department":[{"_id":"DEP5023"}],"author":[{"last_name":"Lohweg","full_name":"Lohweg, Volker","id":"1804","first_name":"Volker","orcid":"0000-0002-3325-7887"}],"year":2015,"date_updated":"2023-03-15T13:49:39Z","user_id":"68554","type":"conference","date_created":"2019-12-04T09:28:06Z","language":[{"iso":"eng"}],"place":"Campus Week 2015, Bundesdruckerei Berlin (eingeladener Vortrag)","_id":"2139"},{"author":[{"full_name":"Mönks, Uwe","id":"1825","last_name":"Mönks","first_name":"Uwe"},{"id":"1486","full_name":"Trsek, Henning","first_name":"Henning","last_name":"Trsek"},{"first_name":"Lars","full_name":"Dürkop, Lars","last_name":"Dürkop"},{"full_name":"Geneiß, Volker","first_name":"Volker","last_name":"Geneiß"},{"orcid":"0000-0002-3325-7887","full_name":"Lohweg, Volker","last_name":"Lohweg","first_name":"Volker","id":"1804"}],"year":2015,"main_file_link":[{"open_access":"1","url":"https://www.sciencedirect.com/science/article/pii/S0957415815000707"}],"department":[{"_id":"DEP5023"}],"abstract":[{"text":"Recent industrial applications are implemented in a modular way, resulting in flexibility during the whole life cycle, i.e., setup, operation, and maintenance. This applies especially to larger applications like logistic, production, and printing processes. Their modular character is resulting from the constantly increasing complexity of such installations, which makes their supervision for securing reliable operation a difficult task: the data of hundreds (if not thousands) of signal sources must be acquired, communicated, and evaluated for system diagnosis. In this contribution we summarize the challenges arising in such applications and show that distributed sensor and information fusion for modular self-diagnosis tackles these challenges. Here, we propose an innovative distributed architecture encompassing intelligent sensor nodes, self-configuring real-time communication networks, and a suitable sensor and information fusion system for condition monitoring. New challenges arise in the context of distributed information fusion systems, which are identified and to which an outlook on future solutions is provided. A number of these solutions have already been discovered, implemented, and are evaluated in the context of a demonstrator, which resembles a real-world printing application.","lang":"eng"}],"issue":"34","status":"public","page":"63-71","publisher":"Elsevier","title":"Towards distributed intelligent sensor and information fusion","citation":{"bjps":"Mönks U et al. (2015) Towards Distributed Intelligent Sensor and Information Fusion. Mechatronics 63–71.","mla":"Mönks, Uwe, et al. “Towards Distributed Intelligent Sensor and Information Fusion.” Mechatronics, no. 34, Elsevier, 2015, pp. 63–71, doi:10.1016/j.mechatronics.2015.05.005.","havard":"U. Mönks, H. Trsek, L. Dürkop, V. Geneiß, V. Lohweg, Towards distributed intelligent sensor and information fusion, Mechatronics. (2015) 63–71.","ufg":"Mönks, Uwe et. al. (2015): Towards distributed intelligent sensor and information fusion, in: Mechatronics (34), S. 63–71.","ama":"Mönks U, Trsek H, Dürkop L, Geneiß V, Lohweg V. Towards distributed intelligent sensor and information fusion. Mechatronics. 2015;(34):63-71. doi:10.1016/j.mechatronics.2015.05.005","van":"Mönks U, Trsek H, Dürkop L, Geneiß V, Lohweg V. Towards distributed intelligent sensor and information fusion. Mechatronics. 2015;(34):63–71.","chicago":"Mönks, Uwe, Henning Trsek, Lars Dürkop, Volker Geneiß, and Volker Lohweg. “Towards Distributed Intelligent Sensor and Information Fusion.” Mechatronics, no. 34 (2015): 63–71. https://doi.org/10.1016/j.mechatronics.2015.05.005.","ieee":"U. Mönks, H. Trsek, L. Dürkop, V. Geneiß, and V. Lohweg, “Towards distributed intelligent sensor and information fusion,” Mechatronics, no. 34, pp. 63–71, 2015.","apa":"Mönks, U., Trsek, H., Dürkop, L., Geneiß, V., & Lohweg, V. (2015). Towards distributed intelligent sensor and information fusion. Mechatronics, (34), 63–71. https://doi.org/10.1016/j.mechatronics.2015.05.005","chicago-de":"Mönks, Uwe, Henning Trsek, Lars Dürkop, Volker Geneiß und Volker Lohweg. 2015. Towards distributed intelligent sensor and information fusion. Mechatronics, Nr. 34: 63–71. doi:10.1016/j.mechatronics.2015.05.005, .","din1505-2-1":"Mönks, Uwe ; Trsek, Henning ; Dürkop, Lars ; Geneiß, Volker ; Lohweg, Volker: Towards distributed intelligent sensor and information fusion. In: Mechatronics, Elsevier (2015), Nr. 34, S. 63–71","short":"U. Mönks, H. Trsek, L. Dürkop, V. Geneiß, V. Lohweg, Mechatronics (2015) 63–71."},"oa":"1","keyword":["Cyber-physical systems","Information fusion","Fusion system design","Intelligent sensors","Self-configuration","Intelligent networking"],"language":[{"iso":"eng"}],"_id":"2140","doi":"10.1016/j.mechatronics.2015.05.005","publication":"Mechatronics","publication_identifier":{"issn":["0957-4158"]},"date_created":"2019-12-04T09:29:07Z","type":"journal_article","user_id":"68554","date_updated":"2023-03-15T13:49:39Z"},{"status":"public","department":[{"_id":"DEP5023"}],"author":[{"id":"1804","first_name":"Volker","full_name":"Lohweg, Volker","last_name":"Lohweg","orcid":"0000-0002-3325-7887"}],"year":2015,"citation":{"ama":"Lohweg V. Bargeld- und IT-Sicherheit - Passt das zusammen? In: 2. Forschungstag IT-Sicherheit NRW, Nrw.UniTS – IT-Sicherheit Nordrhein-Westfalen (Eingeladener Vortrag). Hochschule Niederrhein, Krefeld; 2015.","ieee":"V. Lohweg, “Bargeld- und IT-Sicherheit - Passt das zusammen?,” in 2. Forschungstag IT-Sicherheit NRW, nrw.uniTS – IT-Sicherheit Nordrhein-Westfalen (eingeladener Vortrag), 2015.","van":"Lohweg V. Bargeld- und IT-Sicherheit - Passt das zusammen? In: 2 Forschungstag IT-Sicherheit NRW, nrw.uniTS – IT-Sicherheit Nordrhein-Westfalen (eingeladener Vortrag). Hochschule Niederrhein, Krefeld; 2015.","ufg":"Lohweg, Volker (2015): Bargeld- und IT-Sicherheit - Passt das zusammen?, in: 2. Forschungstag IT-Sicherheit NRW, nrw.uniTS – IT-Sicherheit Nordrhein-Westfalen (eingeladener Vortrag), Hochschule Niederrhein, Krefeld.","bjps":"Lohweg V (2015) Bargeld- Und IT-Sicherheit - Passt Das Zusammen? 2. Forschungstag IT-Sicherheit NRW, Nrw.UniTS – IT-Sicherheit Nordrhein-Westfalen (Eingeladener Vortrag). Hochschule Niederrhein, Krefeld.","havard":"V. Lohweg, Bargeld- und IT-Sicherheit - Passt das zusammen?, in: 2. Forschungstag IT-Sicherheit NRW, Nrw.UniTS – IT-Sicherheit Nordrhein-Westfalen (Eingeladener Vortrag), Hochschule Niederrhein, Krefeld, 2015.","mla":"Lohweg, Volker. “Bargeld- Und IT-Sicherheit - Passt Das Zusammen?” 2. Forschungstag IT-Sicherheit NRW, Nrw.UniTS – IT-Sicherheit Nordrhein-Westfalen (Eingeladener Vortrag), 2015.","apa":"Lohweg, V. (2015). Bargeld- und IT-Sicherheit - Passt das zusammen? In 2. Forschungstag IT-Sicherheit NRW, nrw.uniTS – IT-Sicherheit Nordrhein-Westfalen (eingeladener Vortrag). Hochschule Niederrhein, Krefeld.","chicago":"Lohweg, Volker. “Bargeld- Und IT-Sicherheit - Passt Das Zusammen?” In 2. Forschungstag IT-Sicherheit NRW, Nrw.UniTS – IT-Sicherheit Nordrhein-Westfalen (Eingeladener Vortrag). Hochschule Niederrhein, Krefeld, 2015.","short":"V. Lohweg, in: 2. Forschungstag IT-Sicherheit NRW, Nrw.UniTS – IT-Sicherheit Nordrhein-Westfalen (Eingeladener Vortrag), Hochschule Niederrhein, Krefeld, 2015.","chicago-de":"Lohweg, Volker. 2015. Bargeld- und IT-Sicherheit - Passt das zusammen? In: 2. Forschungstag IT-Sicherheit NRW, nrw.uniTS – IT-Sicherheit Nordrhein-Westfalen (eingeladener Vortrag). Hochschule Niederrhein, Krefeld.","din1505-2-1":"Lohweg, Volker: Bargeld- und IT-Sicherheit - Passt das zusammen? In: 2. Forschungstag IT-Sicherheit NRW, nrw.uniTS – IT-Sicherheit Nordrhein-Westfalen (eingeladener Vortrag). Hochschule Niederrhein, Krefeld, 2015"},"title":"Bargeld- und IT-Sicherheit - Passt das zusammen?","_id":"2143","language":[{"iso":"eng"}],"place":"Hochschule Niederrhein, Krefeld","date_updated":"2023-03-15T13:49:39Z","user_id":"68554","date_created":"2019-12-04T09:38:48Z","type":"conference","publication":"2. Forschungstag IT-Sicherheit NRW, nrw.uniTS – IT-Sicherheit Nordrhein-Westfalen (eingeladener Vortrag)"},{"department":[{"_id":"DEP5023"}],"main_file_link":[{"open_access":"1","url":"https://www.ama-science.org/proceedings/details/2090"}],"author":[{"last_name":"Ehlenbröker","id":"1852","full_name":"Ehlenbröker, Jan-Friedrich","first_name":"Jan-Friedrich"},{"first_name":"Uwe","last_name":"Mönks","id":"1825","full_name":"Mönks, Uwe"},{"first_name":"Volker","last_name":"Lohweg","id":"1804","full_name":"Lohweg, Volker","orcid":"0000-0002-3325-7887"}],"year":2015,"abstract":[{"lang":"eng","text":"One general problem is the detection of sensor defects. Defective sensors can have several negative consequences, e. g., they will lead to machine failure when wear and tear of a machine is not detected sufficiently in advance. In this contribution we present a method to detect faulty sensors by calculating the consistency between sensor values. Background for this consistency-driven approach is a sensor fusion algorithm which combines sensors to attributes. These attributes are generally created based on local or thematical proximity. Therefore a consistency based approach is promising."}],"page":"878 - 883","status":"public","publisher":"AMA-Fachverband","title":"Consistency Based Sensor Defect Detection ","citation":{"short":"J.-F. Ehlenbröker, U. Mönks, V. Lohweg, in: AMA Conferences 2015, SENSOR 2015 - IRS2 2015, AMA-Fachverband, Nuremberg, Germany, 2015, pp. 878–883.","din1505-2-1":"Ehlenbröker, Jan-Friedrich ; Mönks, Uwe ; Lohweg, Volker: Consistency Based Sensor Defect Detection . In: AMA Conferences 2015, SENSOR 2015 - IRS2 2015. Nuremberg, Germany : AMA-Fachverband, 2015, S. 878–883","chicago-de":"Ehlenbröker, Jan-Friedrich, Uwe Mönks und Volker Lohweg. 2015. Consistency Based Sensor Defect Detection . In: AMA Conferences 2015, SENSOR 2015 - IRS2 2015, 878–883. Nuremberg, Germany: AMA-Fachverband.","ama":"Ehlenbröker J-F, Mönks U, Lohweg V. Consistency Based Sensor Defect Detection . In: AMA Conferences 2015, SENSOR 2015 - IRS2 2015. Nuremberg, Germany: AMA-Fachverband; 2015:878-883.","van":"Ehlenbröker J-F, Mönks U, Lohweg V. Consistency Based Sensor Defect Detection . In: AMA Conferences 2015, SENSOR 2015 - IRS2 2015. Nuremberg, Germany: AMA-Fachverband; 2015. p. 878–83.","havard":"J.-F. Ehlenbröker, U. Mönks, V. Lohweg, Consistency Based Sensor Defect Detection , in: AMA Conferences 2015, SENSOR 2015 - IRS2 2015, AMA-Fachverband, Nuremberg, Germany, 2015: pp. 878–883.","bjps":"Ehlenbröker J-F, Mönks U and Lohweg V (2015) Consistency Based Sensor Defect Detection . AMA Conferences 2015, SENSOR 2015 - IRS2 2015. Nuremberg, Germany: AMA-Fachverband, pp. 878–883.","mla":"Ehlenbröker, Jan-Friedrich, et al. “Consistency Based Sensor Defect Detection .” AMA Conferences 2015, SENSOR 2015 - IRS2 2015, AMA-Fachverband, 2015, pp. 878–83.","ufg":"Ehlenbröker, Jan-Friedrich et. al. (2015): Consistency Based Sensor Defect Detection , in: AMA Conferences 2015, SENSOR 2015 - IRS2 2015, Nuremberg, Germany, S. 878–883.","ieee":"J.-F. Ehlenbröker, U. Mönks, and V. Lohweg, “Consistency Based Sensor Defect Detection ,” in AMA Conferences 2015, SENSOR 2015 - IRS2 2015, 2015, pp. 878–883.","apa":"Ehlenbröker, J.-F., Mönks, U., & Lohweg, V. (2015). Consistency Based Sensor Defect Detection . In AMA Conferences 2015, SENSOR 2015 - IRS2 2015 (pp. 878–883). Nuremberg, Germany: AMA-Fachverband.","chicago":"Ehlenbröker, Jan-Friedrich, Uwe Mönks, and Volker Lohweg. “Consistency Based Sensor Defect Detection .” In AMA Conferences 2015, SENSOR 2015 - IRS2 2015, 878–83. Nuremberg, Germany: AMA-Fachverband, 2015."},"oa":"1","language":[{"iso":"eng"}],"place":"Nuremberg, Germany","_id":"2145","date_created":"2019-12-04T09:48:11Z","type":"conference","publication_identifier":{"isbn":["978-3-9813484-8-4 "]},"publication":"AMA Conferences 2015, SENSOR 2015 - IRS2 2015","date_updated":"2023-03-15T13:49:39Z","user_id":"68554"},{"status":"public","author":[{"full_name":"Lohweg, Volker","id":"1804","last_name":"Lohweg","first_name":"Volker","orcid":"0000-0002-3325-7887"}],"year":2015,"department":[{"_id":"DEP5023"}],"citation":{"ieee":"V. Lohweg, “Geld – neue Zahlungssysteme, Die Zeit des Bargeldes geht zu Ende – oder doch nicht? (Vortrag),” in Wirtschaft trifft Wissenschaft, 2015.","ama":"Lohweg V. Geld – neue Zahlungssysteme, Die Zeit des Bargeldes geht zu Ende – oder doch nicht? (Vortrag). In: Wirtschaft Trifft Wissenschaft. MARTa, Herford; 2015.","short":"V. Lohweg, in: Wirtschaft Trifft Wissenschaft, MARTa, Herford, 2015.","din1505-2-1":"Lohweg, Volker: Geld – neue Zahlungssysteme, Die Zeit des Bargeldes geht zu Ende – oder doch nicht? (Vortrag). In: Wirtschaft trifft Wissenschaft. MARTa, Herford, 2015","chicago-de":"Lohweg, Volker. 2015. Geld – neue Zahlungssysteme, Die Zeit des Bargeldes geht zu Ende – oder doch nicht? (Vortrag). In: Wirtschaft trifft Wissenschaft. MARTa, Herford.","apa":"Lohweg, V. (2015). Geld – neue Zahlungssysteme, Die Zeit des Bargeldes geht zu Ende – oder doch nicht? (Vortrag). In Wirtschaft trifft Wissenschaft. MARTa, Herford.","chicago":"Lohweg, Volker. “Geld – Neue Zahlungssysteme, Die Zeit Des Bargeldes Geht Zu Ende – Oder Doch Nicht? (Vortrag).” In Wirtschaft Trifft Wissenschaft. MARTa, Herford, 2015.","van":"Lohweg V. Geld – neue Zahlungssysteme, Die Zeit des Bargeldes geht zu Ende – oder doch nicht? (Vortrag). In: Wirtschaft trifft Wissenschaft. MARTa, Herford; 2015.","mla":"Lohweg, Volker. “Geld – Neue Zahlungssysteme, Die Zeit Des Bargeldes Geht Zu Ende – Oder Doch Nicht? (Vortrag).” Wirtschaft Trifft Wissenschaft, 2015.","bjps":"Lohweg V (2015) Geld – Neue Zahlungssysteme, Die Zeit Des Bargeldes Geht Zu Ende – Oder Doch Nicht? (Vortrag). Wirtschaft Trifft Wissenschaft. MARTa, Herford.","havard":"V. Lohweg, Geld – neue Zahlungssysteme, Die Zeit des Bargeldes geht zu Ende – oder doch nicht? (Vortrag), in: Wirtschaft Trifft Wissenschaft, MARTa, Herford, 2015.","ufg":"Lohweg, Volker (2015): Geld – neue Zahlungssysteme, Die Zeit des Bargeldes geht zu Ende – oder doch nicht? (Vortrag), in: Wirtschaft trifft Wissenschaft, MARTa, Herford."},"title":"Geld – neue Zahlungssysteme, Die Zeit des Bargeldes geht zu Ende – oder doch nicht? (Vortrag)","_id":"2151","place":"MARTa, Herford","language":[{"iso":"eng"}],"user_id":"68554","date_updated":"2023-03-15T13:49:39Z","publication":"Wirtschaft trifft Wissenschaft","type":"conference_abstract","date_created":"2019-12-04T10:02:59Z"},{"title":"Industrie 4.0 aus Sicht des Spitzenclusters it‘s OWL (eingeladener Vortrag)","citation":{"chicago":"Lohweg, Volker. “Industrie 4.0 Aus Sicht Des Spitzenclusters It‘s OWL (Eingeladener Vortrag).” In Forum IEE-Automatisierungstechnik, Elektrotechnik 2015. Dortmund, 2015.","apa":"Lohweg, V. (2015). Industrie 4.0 aus Sicht des Spitzenclusters it‘s OWL (eingeladener Vortrag). In Forum IEE-Automatisierungstechnik, Elektrotechnik 2015. Dortmund.","havard":"V. Lohweg, Industrie 4.0 aus Sicht des Spitzenclusters it‘s OWL (eingeladener Vortrag), in: Forum IEE-Automatisierungstechnik, Elektrotechnik 2015, Dortmund, 2015.","mla":"Lohweg, Volker. “Industrie 4.0 Aus Sicht Des Spitzenclusters It‘s OWL (Eingeladener Vortrag).” Forum IEE-Automatisierungstechnik, Elektrotechnik 2015, 2015.","bjps":"Lohweg V (2015) Industrie 4.0 Aus Sicht Des Spitzenclusters It‘s OWL (Eingeladener Vortrag). Forum IEE-Automatisierungstechnik, Elektrotechnik 2015. Dortmund.","ufg":"Lohweg, Volker (2015): Industrie 4.0 aus Sicht des Spitzenclusters it‘s OWL (eingeladener Vortrag), in: Forum IEE-Automatisierungstechnik, Elektrotechnik 2015, Dortmund.","van":"Lohweg V. Industrie 4.0 aus Sicht des Spitzenclusters it‘s OWL (eingeladener Vortrag). In: Forum IEE-Automatisierungstechnik, Elektrotechnik 2015. Dortmund; 2015.","din1505-2-1":"Lohweg, Volker: Industrie 4.0 aus Sicht des Spitzenclusters it‘s OWL (eingeladener Vortrag). In: Forum IEE-Automatisierungstechnik, Elektrotechnik 2015. Dortmund, 2015","chicago-de":"Lohweg, Volker. 2015. Industrie 4.0 aus Sicht des Spitzenclusters it‘s OWL (eingeladener Vortrag). In: Forum IEE-Automatisierungstechnik, Elektrotechnik 2015. Dortmund.","short":"V. Lohweg, in: Forum IEE-Automatisierungstechnik, Elektrotechnik 2015, Dortmund, 2015.","ieee":"V. Lohweg, “Industrie 4.0 aus Sicht des Spitzenclusters it‘s OWL (eingeladener Vortrag),” in Forum IEE-Automatisierungstechnik, Elektrotechnik 2015, 2015.","ama":"Lohweg V. Industrie 4.0 aus Sicht des Spitzenclusters it‘s OWL (eingeladener Vortrag). In: Forum IEE-Automatisierungstechnik, Elektrotechnik 2015. Dortmund; 2015."},"department":[{"_id":"DEP5023"}],"author":[{"id":"1804","last_name":"Lohweg","first_name":"Volker","full_name":"Lohweg, Volker","orcid":"0000-0002-3325-7887"}],"year":2015,"status":"public","type":"conference_abstract","date_created":"2019-12-04T10:04:33Z","publication":"Forum IEE-Automatisierungstechnik, Elektrotechnik 2015","date_updated":"2023-03-15T13:49:39Z","user_id":"68554","language":[{"iso":"eng"}],"place":"Dortmund","_id":"2153"},{"main_file_link":[{"open_access":"1","url":"https://www.spiedigitallibrary.org/conference-proceedings-of-spie/9404/94040N/Stable-image-acquisition-for-mobile-image-processing-applications/10.1117/12.2076146.full?SSO=1"}],"year":2015,"author":[{"full_name":"Henning, Kai-Fabian","last_name":"Henning","id":"44017","first_name":"Kai-Fabian"},{"first_name":"Alexander","last_name":"Fritze","full_name":"Fritze, Alexander"},{"id":"1706","first_name":"Eugen","last_name":"Gillich","full_name":"Gillich, Eugen"},{"last_name":"Mönks","id":"1825","full_name":"Mönks, Uwe","first_name":"Uwe"},{"last_name":"Lohweg","id":"1804","full_name":"Lohweg, Volker","first_name":"Volker","orcid":"0000-0002-3325-7887"}],"department":[{"_id":"DEP5023"}],"abstract":[{"lang":"eng","text":"Today, mobile devices (smartphones, tablets, etc.) are widespread and of high importance for their users. Their performance as well as versatility increases over time. This leads to the opportunity to use such devices for more specific tasks like image processing in an industrial context. For the analysis of images requirements like image quality (blur, illumination, etc.) as well as a defined relative position of the object to be inspected are crucial. Since mobile devices are handheld and used in constantly changing environments the challenge is to fulfill these requirements. We present an approach to overcome the obstacles and stabilize the image capturing process such that image analysis becomes significantly improved on mobile devices. Therefore, image processing methods are combined with sensor fusion concepts. The approach consists of three main parts. First, pose estimation methods are used to guide a user moving the device to a defined position. Second, the sensors data and the pose information are combined for relative motion estimation. Finally, the image capturing process is automated. It is triggered depending on the alignment of the device and the object as well as the image quality that can be achieved under consideration of motion and environmental effects."}],"status":"public","page":"1-12","publisher":"SPIE","title":"Stable Image Acquisition for Mobile Image Processing Applications","citation":{"apa":"Henning, K.-F., Fritze, A., Gillich, E., Mönks, U., & Lohweg, V. (2015). Stable Image Acquisition for Mobile Image Processing Applications. In IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging XI (pp. 1–12). San Francisco, CA, USA: SPIE. https://doi.org/10.1117/12.2076146","chicago":"Henning, Kai-Fabian, Alexander Fritze, Eugen Gillich, Uwe Mönks, and Volker Lohweg. “Stable Image Acquisition for Mobile Image Processing Applications.” In IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging XI, 1–12. San Francisco, CA, USA: SPIE, 2015. https://doi.org/10.1117/12.2076146.","van":"Henning K-F, Fritze A, Gillich E, Mönks U, Lohweg V. Stable Image Acquisition for Mobile Image Processing Applications. In: IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging XI. San Francisco, CA, USA: SPIE; 2015. p. 1–12.","ufg":"Henning, Kai-Fabian et. al. (2015): Stable Image Acquisition for Mobile Image Processing Applications, in: IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging XI, San Francisco, CA, USA, S. 1–12.","bjps":"Henning K-F et al. (2015) Stable Image Acquisition for Mobile Image Processing Applications. IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging XI. San Francisco, CA, USA: SPIE, pp. 1–12.","mla":"Henning, Kai-Fabian, et al. “Stable Image Acquisition for Mobile Image Processing Applications.” IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging XI, SPIE, 2015, pp. 1–12, doi:10.1117/12.2076146.","havard":"K.-F. Henning, A. Fritze, E. Gillich, U. Mönks, V. Lohweg, Stable Image Acquisition for Mobile Image Processing Applications, in: IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging XI, SPIE, San Francisco, CA, USA, 2015: pp. 1–12.","short":"K.-F. Henning, A. Fritze, E. Gillich, U. Mönks, V. Lohweg, in: IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging XI, SPIE, San Francisco, CA, USA, 2015, pp. 1–12.","chicago-de":"Henning, Kai-Fabian, Alexander Fritze, Eugen Gillich, Uwe Mönks und Volker Lohweg. 2015. Stable Image Acquisition for Mobile Image Processing Applications. In: IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging XI, 1–12. San Francisco, CA, USA: SPIE. doi:10.1117/12.2076146, .","din1505-2-1":"Henning, Kai-Fabian ; Fritze, Alexander ; Gillich, Eugen ; Mönks, Uwe ; Lohweg, Volker: Stable Image Acquisition for Mobile Image Processing Applications. In: IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging XI. San Francisco, CA, USA : SPIE, 2015, S. 1–12","ieee":"K.-F. Henning, A. Fritze, E. Gillich, U. Mönks, and V. Lohweg, “Stable Image Acquisition for Mobile Image Processing Applications,” in IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging XI, 2015, pp. 1–12.","ama":"Henning K-F, Fritze A, Gillich E, Mönks U, Lohweg V. Stable Image Acquisition for Mobile Image Processing Applications. In: IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging XI. San Francisco, CA, USA: SPIE; 2015:1-12. doi:10.1117/12.2076146"},"oa":"1","keyword":["Image processing","Image acquisition","Mobile devices Sensors","Image fusion","Motion estimation","Cameras"],"place":"San Francisco, CA, USA","language":[{"iso":"eng"}],"_id":"2155","doi":"10.1117/12.2076146","publication":"IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging XI","type":"conference","date_created":"2019-12-04T10:07:01Z","user_id":"68554","date_updated":"2023-03-15T13:49:39Z"},{"publication":"IST/SPIE Electronic Imaging 2015, Image Processing: Machine Vision Applications VIII","type":"conference","date_created":"2019-12-04T12:41:37Z","user_id":"68554","date_updated":"2023-03-15T13:49:39Z","place":"San Francisco, CA, USA","language":[{"iso":"eng"}],"_id":"2166","title":"Advanced Color Processing for Mobile Devices ","citation":{"short":"E. Gillich, H. Dörksen, V. Lohweg, in: IST/SPIE Electronic Imaging 2015, Image Processing: Machine Vision Applications VIII, SPIE, San Francisco, CA, USA, 2015, pp. 1–12.","din1505-2-1":"Gillich, Eugen ; Dörksen, Helene ; Lohweg, Volker: Advanced Color Processing for Mobile Devices . In: IST/SPIE Electronic Imaging 2015, Image Processing: Machine Vision Applications VIII. San Francisco, CA, USA : SPIE, 2015, S. 1–12","chicago-de":"Gillich, Eugen, Helene Dörksen und Volker Lohweg. 2015. Advanced Color Processing for Mobile Devices . In: IST/SPIE Electronic Imaging 2015, Image Processing: Machine Vision Applications VIII, 1–12. San Francisco, CA, USA: SPIE.","apa":"Gillich, E., Dörksen, H., & Lohweg, V. (2015). Advanced Color Processing for Mobile Devices . In IST/SPIE Electronic Imaging 2015, Image Processing: Machine Vision Applications VIII (pp. 1–12). San Francisco, CA, USA: SPIE.","chicago":"Gillich, Eugen, Helene Dörksen, and Volker Lohweg. “Advanced Color Processing for Mobile Devices .” In IST/SPIE Electronic Imaging 2015, Image Processing: Machine Vision Applications VIII, 1–12. San Francisco, CA, USA: SPIE, 2015.","van":"Gillich E, Dörksen H, Lohweg V. Advanced Color Processing for Mobile Devices . In: IST/SPIE Electronic Imaging 2015, Image Processing: Machine Vision Applications VIII. San Francisco, CA, USA: SPIE; 2015. p. 1–12.","mla":"Gillich, Eugen, et al. “Advanced Color Processing for Mobile Devices .” IST/SPIE Electronic Imaging 2015, Image Processing: Machine Vision Applications VIII, SPIE, 2015, pp. 1–12.","bjps":"Gillich E, Dörksen H and Lohweg V (2015) Advanced Color Processing for Mobile Devices . IST/SPIE Electronic Imaging 2015, Image Processing: Machine Vision Applications VIII. San Francisco, CA, USA: SPIE, pp. 1–12.","havard":"E. Gillich, H. Dörksen, V. Lohweg, Advanced Color Processing for Mobile Devices , in: IST/SPIE Electronic Imaging 2015, Image Processing: Machine Vision Applications VIII, SPIE, San Francisco, CA, USA, 2015: pp. 1–12.","ufg":"Gillich, Eugen et. al. (2015): Advanced Color Processing for Mobile Devices , in: IST/SPIE Electronic Imaging 2015, Image Processing: Machine Vision Applications VIII, San Francisco, CA, USA, S. 1–12.","ieee":"E. Gillich, H. Dörksen, and V. Lohweg, “Advanced Color Processing for Mobile Devices ,” in IST/SPIE Electronic Imaging 2015, Image Processing: Machine Vision Applications VIII, 2015, pp. 1–12.","ama":"Gillich E, Dörksen H, Lohweg V. Advanced Color Processing for Mobile Devices . In: IST/SPIE Electronic Imaging 2015, Image Processing: Machine Vision Applications VIII. San Francisco, CA, USA: SPIE; 2015:1-12."},"author":[{"id":"1706","full_name":"Gillich, Eugen","last_name":"Gillich","first_name":"Eugen"},{"id":"46416","first_name":"Helene","full_name":"Dörksen, Helene","last_name":"Dörksen"},{"orcid":"0000-0002-3325-7887","first_name":"Volker","id":"1804","full_name":"Lohweg, Volker","last_name":"Lohweg"}],"year":2015,"department":[{"_id":"DEP5023"}],"status":"public","page":"1-12","publisher":"SPIE"},{"citation":{"ufg":"Niggemann, Oliver/Lohweg, Volker (2015): On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda, in: Twenty-Ninth Conference on Artificial Intelligence (AAAI-15), Austin, Texas, USA.","mla":"Niggemann, Oliver, and Volker Lohweg. “On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda.” Twenty-Ninth Conference on Artificial Intelligence (AAAI-15), 2015.","havard":"O. Niggemann, V. Lohweg, On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda, in: Twenty-Ninth Conference on Artificial Intelligence (AAAI-15), Austin, Texas, USA, 2015.","bjps":"Niggemann O and Lohweg V (2015) On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda. Twenty-Ninth Conference on Artificial Intelligence (AAAI-15). Austin, Texas, USA.","van":"Niggemann O, Lohweg V. On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda. In: Twenty-Ninth Conference on Artificial Intelligence (AAAI-15). Austin, Texas, USA; 2015.","chicago":"Niggemann, Oliver, and Volker Lohweg. “On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda.” In Twenty-Ninth Conference on Artificial Intelligence (AAAI-15). Austin, Texas, USA, 2015.","apa":"Niggemann, O., & Lohweg, V. (2015). On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda. In Twenty-Ninth Conference on Artificial Intelligence (AAAI-15). Austin, Texas, USA.","din1505-2-1":"Niggemann, Oliver ; Lohweg, Volker: On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda. In: Twenty-Ninth Conference on Artificial Intelligence (AAAI-15). Austin, Texas, USA, 2015","chicago-de":"Niggemann, Oliver und Volker Lohweg. 2015. On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda. In: Twenty-Ninth Conference on Artificial Intelligence (AAAI-15). Austin, Texas, USA.","short":"O. Niggemann, V. Lohweg, in: Twenty-Ninth Conference on Artificial Intelligence (AAAI-15), Austin, Texas, USA, 2015.","ama":"Niggemann O, Lohweg V. On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda. In: Twenty-Ninth Conference on Artificial Intelligence (AAAI-15). Austin, Texas, USA; 2015.","ieee":"O. Niggemann and V. Lohweg, “On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda,” in Twenty-Ninth Conference on Artificial Intelligence (AAAI-15), 2015."},"title":"On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda","status":"public","department":[{"_id":"DEP5023"}],"author":[{"last_name":"Niggemann","first_name":"Oliver","id":"10876","full_name":"Niggemann, Oliver"},{"first_name":"Volker","full_name":"Lohweg, Volker","id":"1804","last_name":"Lohweg","orcid":"0000-0002-3325-7887"}],"year":2015,"main_file_link":[{"open_access":"1","url":"https://www.aaai.org/ocs/index.php/AAAI/AAAI15/paper/view/9530/9691"}],"abstract":[{"lang":"eng","text":"Cyber-Physical Production Systems (CPPSs) are in the focus of research, industry and politics: By applying new IT and new computer science solutions, production systems will become more adaptable, more resource ef- ficient and more user friendly. The analysis and diagnosis of such systems is a major part of this trend: Plants should detect automatically wear, faults and suboptimal configurations. This paper reflects the current state-of- the-art in diagnosis against the requirements of CPPSs, identifies three main gaps and gives application scenarios to outline first ideas for potential solutions to close these gaps.\r\n"}],"date_updated":"2023-03-15T13:49:39Z","user_id":"68554","date_created":"2019-12-04T12:43:12Z","type":"conference","publication":"Twenty-Ninth Conference on Artificial Intelligence (AAAI-15)","language":[{"iso":"eng"}],"place":"Austin, Texas, USA","keyword":["Cyber-Physical Systems","Machine Learning","Diagnosis","Anomaly Detection"],"_id":"2167","oa":"1"},{"title":"Knochenpartikel im Verarbeitungsfleisch für die Wurstproduktion","volume":95,"citation":{"short":"M. Upmann, P. Lade, Fleischwirtschaft 95 (2015) 109–112.","din1505-2-1":"Upmann, Matthias ; Lade, P.: Knochenpartikel im Verarbeitungsfleisch für die Wurstproduktion. In: Fleischwirtschaft Bd. 95 (2015), Nr. 9, S. 109–112","chicago-de":"Upmann, Matthias und P. Lade. 2015. Knochenpartikel im Verarbeitungsfleisch für die Wurstproduktion. Fleischwirtschaft 95, Nr. 9: 109–112.","apa":"Upmann, M., & Lade, P. (2015). Knochenpartikel im Verarbeitungsfleisch für die Wurstproduktion. Fleischwirtschaft, 95(9), 109–112.","chicago":"Upmann, Matthias, and P. Lade. “Knochenpartikel im Verarbeitungsfleisch für die Wurstproduktion.” Fleischwirtschaft 95, no. 9 (2015): 109–12.","van":"Upmann M, Lade P. Knochenpartikel im Verarbeitungsfleisch für die Wurstproduktion. Fleischwirtschaft. 2015;95(9):109–12.","mla":"Upmann, Matthias, and P. Lade. “Knochenpartikel im Verarbeitungsfleisch für die Wurstproduktion.” Fleischwirtschaft, vol. 95, no. 9, 2015, pp. 109–12.","bjps":"Upmann M and Lade P (2015) Knochenpartikel im Verarbeitungsfleisch für die Wurstproduktion. Fleischwirtschaft 95, 109–112.","havard":"M. Upmann, P. Lade, Knochenpartikel im Verarbeitungsfleisch für die Wurstproduktion, Fleischwirtschaft. 95 (2015) 109–112.","ufg":"Upmann, Matthias/Lade, P.: Knochenpartikel im Verarbeitungsfleisch für die Wurstproduktion, in: Fleischwirtschaft 95 (2015), H. 9, S. 109–112.","ieee":"M. Upmann and P. Lade, “Knochenpartikel im Verarbeitungsfleisch für die Wurstproduktion,” Fleischwirtschaft, vol. 95, no. 9, pp. 109–112, 2015.","ama":"Upmann M, Lade P. Knochenpartikel im Verarbeitungsfleisch für die Wurstproduktion. Fleischwirtschaft. 2015;95(9):109-112."},"publication_status":"published","year":"2015","author":[{"first_name":"Matthias","last_name":"Upmann","id":"12666","full_name":"Upmann, Matthias"},{"last_name":"Lade","first_name":"P.","full_name":"Lade, P."}],"department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"issue":"9","status":"public","page":"109-112","publication":"Fleischwirtschaft","type":"journal_article","date_created":"2020-05-26T13:00:02Z","user_id":"83778","date_updated":"2024-05-17T12:37:41Z","intvolume":" 95","language":[{"iso":"ger"}],"_id":"2597"},{"publication_status":"published","citation":{"apa":"Lautenschläger, R., Stiebing, A., & Upmann, M. (2015). Verarbeitungseigenschaften von Eberfleisch. Forum Fleischwirtschaft, Osnabrück.","chicago":"Lautenschläger, Ralf, Achim Stiebing, and Matthias Upmann. “Verarbeitungseigenschaften von Eberfleisch,” 2015.","van":"Lautenschläger R, Stiebing A, Upmann M. Verarbeitungseigenschaften von Eberfleisch. In 2015.","havard":"R. Lautenschläger, A. Stiebing, M. Upmann, Verarbeitungseigenschaften von Eberfleisch, in: 2015.","bjps":"Lautenschläger R, Stiebing A and Upmann M (2015) Verarbeitungseigenschaften von Eberfleisch.","mla":"Lautenschläger, Ralf, et al. Verarbeitungseigenschaften von Eberfleisch. 2015.","ufg":"Lautenschläger, Ralf/Stiebing, Achim/Upmann, Matthias: Verarbeitungseigenschaften von Eberfleisch, in: o. Hg.: o. O. 2015.","short":"R. Lautenschläger, A. Stiebing, M. Upmann, in: 2015.","chicago-de":"Lautenschläger, Ralf, Achim Stiebing und Matthias Upmann. 2015. Verarbeitungseigenschaften von Eberfleisch. In: .","din1505-2-1":"Lautenschläger, Ralf ; Stiebing, Achim ; Upmann, Matthias: Verarbeitungseigenschaften von Eberfleisch. In: , 2015","ieee":"R. Lautenschläger, A. Stiebing, and M. Upmann, “Verarbeitungseigenschaften von Eberfleisch,” presented at the Forum Fleischwirtschaft, Osnabrück, 2015.","ama":"Lautenschläger R, Stiebing A, Upmann M. Verarbeitungseigenschaften von Eberfleisch. In: ; 2015."},"title":"Verarbeitungseigenschaften von Eberfleisch","status":"public","conference":{"start_date":"2015-06-11","end_date":"2015-06-11","name":"Forum Fleischwirtschaft","location":"Osnabrück"},"department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"author":[{"first_name":"Ralf","id":"62087","full_name":"Lautenschläger, Ralf","last_name":"Lautenschläger"},{"id":"12235","last_name":"Stiebing","full_name":"Stiebing, Achim","first_name":"Achim"},{"id":"12666","first_name":"Matthias","last_name":"Upmann","full_name":"Upmann, Matthias"}],"year":"2015","date_updated":"2024-05-17T12:38:04Z","user_id":"83778","date_created":"2020-05-26T13:02:35Z","type":"conference","_id":"2598","language":[{"iso":"ger"}]},{"author":[{"first_name":"Matthias","last_name":"Upmann","full_name":"Upmann, Matthias","id":"12666"}],"year":"2015","department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"conference":{"name":"56. Arbeitstagung des Arbeitsgebietes \"Lebensmittelhygiene\"","location":"Garmisch-Partenkirchen","end_date":"2015-10-02","start_date":"2015-09-29"},"status":"public","title":"Workshop Lebensmittelhistologie: Hackfleisch - Zerkleinerung","citation":{"short":"M. Upmann, in: 2015.","din1505-2-1":"Upmann, Matthias: Workshop Lebensmittelhistologie: Hackfleisch - Zerkleinerung. In: , 2015","chicago-de":"Upmann, Matthias. 2015. Workshop Lebensmittelhistologie: Hackfleisch - Zerkleinerung. In: .","apa":"Upmann, M. (2015). Workshop Lebensmittelhistologie: Hackfleisch - Zerkleinerung. 56. Arbeitstagung des Arbeitsgebietes “Lebensmittelhygiene,” Garmisch-Partenkirchen.","ieee":"M. Upmann, “Workshop Lebensmittelhistologie: Hackfleisch - Zerkleinerung,” presented at the 56. Arbeitstagung des Arbeitsgebietes “Lebensmittelhygiene,” Garmisch-Partenkirchen, 2015.","chicago":"Upmann, Matthias. “Workshop Lebensmittelhistologie: Hackfleisch - Zerkleinerung,” 2015.","van":"Upmann M. Workshop Lebensmittelhistologie: Hackfleisch - Zerkleinerung. In 2015.","ama":"Upmann M. Workshop Lebensmittelhistologie: Hackfleisch - Zerkleinerung. In: ; 2015.","ufg":"Upmann, Matthias: Workshop Lebensmittelhistologie: Hackfleisch - Zerkleinerung, in: o. Hg.: o. O. 2015.","mla":"Upmann, Matthias. Workshop Lebensmittelhistologie: Hackfleisch - Zerkleinerung. 2015.","havard":"M. Upmann, Workshop Lebensmittelhistologie: Hackfleisch - Zerkleinerung, in: 2015.","bjps":"Upmann M (2015) Workshop Lebensmittelhistologie: Hackfleisch - Zerkleinerung."},"publication_status":"published","_id":"2599","language":[{"iso":"ger"}],"type":"conference","date_created":"2020-05-26T13:04:19Z","user_id":"83778","date_updated":"2024-05-17T12:40:14Z"},{"user_id":"79260","date_updated":"2023-03-15T13:49:41Z","intvolume":" 95","publication_identifier":{"issn":["0015-363x"]},"publication":"Fleischwirtschaft","date_created":"2020-05-26T13:06:48Z","type":"journal_article","language":[{"iso":"ger"}],"_id":"2600","citation":{"din1505-2-1":"Weyland, Gerd ; Upmann, Matthias: Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 2. In: Fleischwirtschaft Bd. 95 (2015), Nr. 9, S. 84–86","chicago-de":"Weyland, Gerd und Matthias Upmann. 2015. Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 2. Fleischwirtschaft 95, Nr. 9: 84–86.","short":"G. Weyland, M. Upmann, Fleischwirtschaft 95 (2015) 84–86.","chicago":"Weyland, Gerd, and Matthias Upmann. “Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 2.” Fleischwirtschaft 95, no. 9 (2015): 84–86.","apa":"Weyland, G., & Upmann, M. (2015). Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 2. Fleischwirtschaft, 95(9), 84–86.","ieee":"G. Weyland and M. Upmann, “Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 2,” Fleischwirtschaft, vol. 95, no. 9, pp. 84–86, 2015.","ufg":"Weyland, Gerd/Upmann, Matthias (2015): Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 2, in: Fleischwirtschaft 95 (9), S. 84–86.","havard":"G. Weyland, M. Upmann, Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 2, Fleischwirtschaft. 95 (2015) 84–86.","mla":"Weyland, Gerd, and Matthias Upmann. “Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 2.” Fleischwirtschaft, vol. 95, no. 9, 2015, pp. 84–86.","bjps":"Weyland G and Upmann M (2015) Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 2. Fleischwirtschaft 95, 84–86.","van":"Weyland G, Upmann M. Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 2. Fleischwirtschaft. 2015;95(9):84–6.","ama":"Weyland G, Upmann M. Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 2. Fleischwirtschaft. 2015;95(9):84-86."},"volume":95,"publication_status":"published","title":"Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 2","status":"public","page":"84-86","author":[{"full_name":"Weyland, Gerd","first_name":"Gerd","last_name":"Weyland","id":"52116"},{"id":"12666","last_name":"Upmann","full_name":"Upmann, Matthias","first_name":"Matthias"}],"year":2015,"department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"issue":"9"},{"status":"public","page":"60-63","author":[{"id":"52116","last_name":"Weyland","first_name":"Gerd","full_name":"Weyland, Gerd"},{"first_name":"Matthias","last_name":"Upmann","id":"12666","full_name":"Upmann, Matthias"}],"year":2015,"department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"issue":"10","citation":{"ama":"Weyland G, Upmann M. Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 3. Fleischwirtschaft. 2015;95(10):60-63.","ieee":"G. Weyland and M. Upmann, “Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 3,” Fleischwirtschaft, vol. 95, no. 10, pp. 60–63, 2015.","short":"G. Weyland, M. Upmann, Fleischwirtschaft 95 (2015) 60–63.","chicago-de":"Weyland, Gerd und Matthias Upmann. 2015. Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 3. Fleischwirtschaft 95, Nr. 10: 60–63.","din1505-2-1":"Weyland, Gerd ; Upmann, Matthias: Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 3. In: Fleischwirtschaft Bd. 95 (2015), Nr. 10, S. 60–63","van":"Weyland G, Upmann M. Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 3. Fleischwirtschaft. 2015;95(10):60–3.","ufg":"Weyland, Gerd/Upmann, Matthias (2015): Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 3, in: Fleischwirtschaft 95 (10), S. 60–63.","havard":"G. Weyland, M. Upmann, Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 3, Fleischwirtschaft. 95 (2015) 60–63.","mla":"Weyland, Gerd, and Matthias Upmann. “Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 3.” Fleischwirtschaft, vol. 95, no. 10, 2015, pp. 60–63.","bjps":"Weyland G and Upmann M (2015) Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 3. Fleischwirtschaft 95, 60–63.","apa":"Weyland, G., & Upmann, M. (2015). Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 3. Fleischwirtschaft, 95(10), 60–63.","chicago":"Weyland, Gerd, and Matthias Upmann. “Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 3.” Fleischwirtschaft 95, no. 10 (2015): 60–63."},"volume":95,"publication_status":"published","title":"Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 3","language":[{"iso":"ger"}],"_id":"2601","user_id":"79260","date_updated":"2023-03-15T13:49:41Z","intvolume":" 95","publication_identifier":{"issn":["0015-363x"]},"publication":"Fleischwirtschaft","date_created":"2020-05-26T13:08:23Z","type":"journal_article"},{"_id":"2602","language":[{"iso":"ger"}],"intvolume":" 95","user_id":"79260","date_updated":"2023-03-15T13:49:41Z","publication_identifier":{"issn":["0015-363x"]},"publication":"Fleischwirtschaft","date_created":"2020-05-26T13:09:57Z","type":"journal_article","status":"public","page":"51-53","issue":"11","year":2015,"author":[{"full_name":"Weyland, Gerd","first_name":"Gerd","id":"52116","last_name":"Weyland"},{"last_name":"Upmann","full_name":"Upmann, Matthias","id":"12666","first_name":"Matthias"}],"department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"citation":{"apa":"Weyland, G., & Upmann, M. (2015). Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 4. Fleischwirtschaft, 95(11), 51–53.","chicago":"Weyland, Gerd, and Matthias Upmann. “Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 4.” Fleischwirtschaft 95, no. 11 (2015): 51–53.","van":"Weyland G, Upmann M. Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 4. Fleischwirtschaft. 2015;95(11):51–3.","ufg":"Weyland, Gerd/Upmann, Matthias (2015): Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 4, in: Fleischwirtschaft 95 (11), S. 51–53.","havard":"G. Weyland, M. Upmann, Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 4, Fleischwirtschaft. 95 (2015) 51–53.","mla":"Weyland, Gerd, and Matthias Upmann. “Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 4.” Fleischwirtschaft, vol. 95, no. 11, 2015, pp. 51–53.","bjps":"Weyland G and Upmann M (2015) Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 4. Fleischwirtschaft 95, 51–53.","short":"G. Weyland, M. Upmann, Fleischwirtschaft 95 (2015) 51–53.","din1505-2-1":"Weyland, Gerd ; Upmann, Matthias: Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 4. In: Fleischwirtschaft Bd. 95 (2015), Nr. 11, S. 51–53","chicago-de":"Weyland, Gerd und Matthias Upmann. 2015. Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 4. Fleischwirtschaft 95, Nr. 11: 51–53.","ieee":"G. Weyland and M. Upmann, “Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 4,” Fleischwirtschaft, vol. 95, no. 11, pp. 51–53, 2015.","ama":"Weyland G, Upmann M. Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 4. Fleischwirtschaft. 2015;95(11):51-53."},"volume":95,"publication_status":"published","title":"Was ist erlaubt, was verboten? 11. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost - Teil 4"},{"title":"Herkunftskennzeichnung von Fleisch","citation":{"ama":"Schulze G, Upmann M. Herkunftskennzeichnung von Fleisch. Food & Recht Praxis. 2015;(4):9-11.","ieee":"G. Schulze and M. Upmann, “Herkunftskennzeichnung von Fleisch,” Food & Recht Praxis, no. 4, pp. 9–11, 2015.","din1505-2-1":"Schulze, G. ; Upmann, Matthias: Herkunftskennzeichnung von Fleisch. In: Food & Recht Praxis (2015), Nr. 4, S. 9–11","chicago-de":"Schulze, G. und Matthias Upmann. 2015. Herkunftskennzeichnung von Fleisch. Food & Recht Praxis, Nr. 4: 9–11.","short":"G. Schulze, M. Upmann, Food & Recht Praxis (2015) 9–11.","ufg":"Schulze, G./Upmann, Matthias: Herkunftskennzeichnung von Fleisch, in: Food & Recht Praxis (2015), H. 4, S. 9–11.","havard":"G. Schulze, M. Upmann, Herkunftskennzeichnung von Fleisch, Food & Recht Praxis. (2015) 9–11.","mla":"Schulze, G., and Matthias Upmann. “Herkunftskennzeichnung von Fleisch.” Food & Recht Praxis, no. 4, 2015, pp. 9–11.","bjps":"Schulze G and Upmann M (2015) Herkunftskennzeichnung von Fleisch. Food & Recht Praxis 9–11.","van":"Schulze G, Upmann M. Herkunftskennzeichnung von Fleisch. Food & Recht Praxis. 2015;(4):9–11.","chicago":"Schulze, G., and Matthias Upmann. “Herkunftskennzeichnung von Fleisch.” Food & Recht Praxis, no. 4 (2015): 9–11.","apa":"Schulze, G., & Upmann, M. (2015). Herkunftskennzeichnung von Fleisch. Food & Recht Praxis, 4, 9–11."},"publication_status":"published","issue":"4","author":[{"first_name":"G.","full_name":"Schulze, G.","last_name":"Schulze"},{"last_name":"Upmann","first_name":"Matthias","id":"12666","full_name":"Upmann, Matthias"}],"year":"2015","department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"status":"public","page":"9-11","publication":"Food & Recht Praxis","date_created":"2020-05-26T13:11:26Z","type":"journal_article","user_id":"83778","date_updated":"2024-05-17T12:41:09Z","_id":"2603","language":[{"iso":"ger"}]},{"type":"conference","date_created":"2020-05-26T13:14:01Z","user_id":"83778","date_updated":"2024-05-17T12:41:33Z","_id":"2604","language":[{"iso":"ger"}],"title":"Verzicht auf die Kastration durch Ebermast oder Immunokastration. Herausforderungen aus Sicht der Produktqualität","citation":{"din1505-2-1":"Upmann, Matthias ; Hölscher, Maike ; Lautenschläger, Ralf ; Zapp, Jürgen ; Stiebing, Achim: Verzicht auf die Kastration durch Ebermast oder Immunokastration. Herausforderungen aus Sicht der Produktqualität. In: , 2015","chicago-de":"Upmann, Matthias, Maike Hölscher, Ralf Lautenschläger, Jürgen Zapp und Achim Stiebing. 2015. Verzicht auf die Kastration durch Ebermast oder Immunokastration. Herausforderungen aus Sicht der Produktqualität. In: .","short":"M. Upmann, M. Hölscher, R. Lautenschläger, J. Zapp, A. Stiebing, in: 2015.","mla":"Upmann, Matthias, et al. Verzicht auf die Kastration durch Ebermast oder Immunokastration. Herausforderungen aus Sicht der Produktqualität. 2015.","havard":"M. Upmann, M. Hölscher, R. Lautenschläger, J. Zapp, A. Stiebing, Verzicht auf die Kastration durch Ebermast oder Immunokastration. Herausforderungen aus Sicht der Produktqualität, in: 2015.","bjps":"Upmann M et al. (2015) Verzicht auf die Kastration durch Ebermast oder Immunokastration. Herausforderungen aus Sicht der Produktqualität.","ufg":"Upmann, Matthias u. a.: Verzicht auf die Kastration durch Ebermast oder Immunokastration. Herausforderungen aus Sicht der Produktqualität, in: o. Hg.: o. O. 2015.","van":"Upmann M, Hölscher M, Lautenschläger R, Zapp J, Stiebing A. Verzicht auf die Kastration durch Ebermast oder Immunokastration. Herausforderungen aus Sicht der Produktqualität. In 2015.","chicago":"Upmann, Matthias, Maike Hölscher, Ralf Lautenschläger, Jürgen Zapp, and Achim Stiebing. “Verzicht auf die Kastration durch Ebermast oder Immunokastration. Herausforderungen aus Sicht der Produktqualität,” 2015.","apa":"Upmann, M., Hölscher, M., Lautenschläger, R., Zapp, J., & Stiebing, A. (2015). Verzicht auf die Kastration durch Ebermast oder Immunokastration. Herausforderungen aus Sicht der Produktqualität. Fachtagung Alternativen zur betäubungslosen Ferkelkastration, Herrsching.","ama":"Upmann M, Hölscher M, Lautenschläger R, Zapp J, Stiebing A. Verzicht auf die Kastration durch Ebermast oder Immunokastration. Herausforderungen aus Sicht der Produktqualität. In: ; 2015.","ieee":"M. Upmann, M. Hölscher, R. Lautenschläger, J. Zapp, and A. Stiebing, “Verzicht auf die Kastration durch Ebermast oder Immunokastration. Herausforderungen aus Sicht der Produktqualität,” presented at the Fachtagung Alternativen zur betäubungslosen Ferkelkastration, Herrsching, 2015."},"publication_status":"published","year":"2015","author":[{"last_name":"Upmann","full_name":"Upmann, Matthias","id":"12666","first_name":"Matthias"},{"first_name":"Maike","id":"12647","full_name":"Hölscher, Maike","last_name":"Hölscher"},{"first_name":"Ralf","id":"62087","full_name":"Lautenschläger, Ralf","last_name":"Lautenschläger"},{"last_name":"Zapp","full_name":"Zapp, Jürgen","id":"12568","first_name":"Jürgen"},{"id":"12235","full_name":"Stiebing, Achim","first_name":"Achim","last_name":"Stiebing"}],"conference":{"name":"Fachtagung Alternativen zur betäubungslosen Ferkelkastration","location":"Herrsching","start_date":"2015-12-17","end_date":"2015-12-17"},"department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"status":"public"},{"language":[{"iso":"ger"}],"_id":"2605","type":"journal_article","date_created":"2020-05-26T13:16:10Z","publication":"Fleischwirtschaft","date_updated":"2024-05-17T12:41:55Z","user_id":"83778","intvolume":" 95","department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"year":"2015","author":[{"full_name":"Langen, M.","first_name":"M.","last_name":"Langen"},{"last_name":"Klein","first_name":"G.","full_name":"Klein, G."},{"last_name":"Schigulski","full_name":"Schigulski, S.","first_name":"S."},{"last_name":"Upmann","id":"12666","full_name":"Upmann, Matthias","first_name":"Matthias"}],"issue":"12","page":"61-63","status":"public","title":"Furculafleisch ist kein Separatorenfleisch","publication_status":"published","citation":{"van":"Langen M, Klein G, Schigulski S, Upmann M. Furculafleisch ist kein Separatorenfleisch. Fleischwirtschaft. 2015;95(12):61–3.","ama":"Langen M, Klein G, Schigulski S, Upmann M. Furculafleisch ist kein Separatorenfleisch. Fleischwirtschaft. 2015;95(12):61-63.","ufg":"Langen, M. u. a.: Furculafleisch ist kein Separatorenfleisch, in: Fleischwirtschaft 95 (2015), H. 12, S. 61–63.","mla":"Langen, M., et al. “Furculafleisch ist kein Separatorenfleisch.” Fleischwirtschaft, vol. 95, no. 12, 2015, pp. 61–63.","havard":"M. Langen, G. Klein, S. Schigulski, M. Upmann, Furculafleisch ist kein Separatorenfleisch, Fleischwirtschaft. 95 (2015) 61–63.","bjps":"Langen M et al. (2015) Furculafleisch ist kein Separatorenfleisch. Fleischwirtschaft 95, 61–63.","apa":"Langen, M., Klein, G., Schigulski, S., & Upmann, M. (2015). Furculafleisch ist kein Separatorenfleisch. Fleischwirtschaft, 95(12), 61–63.","ieee":"M. Langen, G. Klein, S. Schigulski, and M. Upmann, “Furculafleisch ist kein Separatorenfleisch,” Fleischwirtschaft, vol. 95, no. 12, pp. 61–63, 2015.","chicago":"Langen, M., G. Klein, S. Schigulski, and Matthias Upmann. “Furculafleisch ist kein Separatorenfleisch.” Fleischwirtschaft 95, no. 12 (2015): 61–63.","short":"M. Langen, G. Klein, S. Schigulski, M. Upmann, Fleischwirtschaft 95 (2015) 61–63.","din1505-2-1":"Langen, M. ; Klein, G. ; Schigulski, S. ; Upmann, Matthias: Furculafleisch ist kein Separatorenfleisch. In: Fleischwirtschaft Bd. 95 (2015), Nr. 12, S. 61–63","chicago-de":"Langen, M., G. Klein, S. Schigulski und Matthias Upmann. 2015. Furculafleisch ist kein Separatorenfleisch. Fleischwirtschaft 95, Nr. 12: 61–63."},"volume":95},{"date_updated":"2023-03-15T13:49:49Z","user_id":"74004","intvolume":" 4","type":"journal_article","date_created":"2020-11-23T13:44:16Z","publication_identifier":{"issn":["2167-4205"]},"publication":"SAE International Journal of Alternative Powertrains ","language":[{"iso":"eng"}],"place":" Warrendale, PA ","_id":"4012","article_type":"original","publication_status":"published","citation":{"bjps":"Geng S and Schulte T (2015) Real-Time Powertrain Models of Hybrid Electric Vehicles. SAE International Journal of Alternative Powertrains 4, 34–45.","havard":"S. Geng, T. Schulte, Real-Time Powertrain Models of Hybrid Electric Vehicles, SAE International Journal of Alternative Powertrains . 4 (2015) 34–45.","mla":"Geng, Stefan, and Thomas Schulte. “Real-Time Powertrain Models of Hybrid Electric Vehicles.” SAE International Journal of Alternative Powertrains , vol. 4, no. 1, SAE International, 2015, pp. 34–45.","ufg":"Geng, Stefan/Schulte, Thomas (2015): Real-Time Powertrain Models of Hybrid Electric Vehicles, in: SAE International Journal of Alternative Powertrains 4 (1), S. 34–45.","van":"Geng S, Schulte T. Real-Time Powertrain Models of Hybrid Electric Vehicles. SAE International Journal of Alternative Powertrains . 2015;4(1):34–45.","chicago":"Geng, Stefan, and Thomas Schulte. “Real-Time Powertrain Models of Hybrid Electric Vehicles.” SAE International Journal of Alternative Powertrains 4, no. 1 (2015): 34–45.","apa":"Geng, S., & Schulte, T. (2015). Real-Time Powertrain Models of Hybrid Electric Vehicles. SAE International Journal of Alternative Powertrains , 4(1), 34–45.","chicago-de":"Geng, Stefan und Thomas Schulte. 2015. Real-Time Powertrain Models of Hybrid Electric Vehicles. SAE International Journal of Alternative Powertrains 4, Nr. 1: 34–45.","din1505-2-1":"Geng, Stefan ; Schulte, Thomas: Real-Time Powertrain Models of Hybrid Electric Vehicles. In: SAE International Journal of Alternative Powertrains Bd. 4. Warrendale, PA , SAE International (2015), Nr. 1, S. 34–45","short":"S. Geng, T. Schulte, SAE International Journal of Alternative Powertrains 4 (2015) 34–45.","ama":"Geng S, Schulte T. Real-Time Powertrain Models of Hybrid Electric Vehicles. SAE International Journal of Alternative Powertrains . 2015;4(1):34-45.","ieee":"S. Geng and T. Schulte, “Real-Time Powertrain Models of Hybrid Electric Vehicles,” SAE International Journal of Alternative Powertrains , vol. 4, no. 1, pp. 34–45, 2015."},"volume":4,"title":"Real-Time Powertrain Models of Hybrid Electric Vehicles","page":"34 - 45","status":"public","publisher":"SAE International","department":[{"_id":"DEP6020"}],"year":2015,"author":[{"first_name":"Stefan","full_name":"Geng, Stefan","id":"43696","last_name":"Geng"},{"full_name":"Schulte, Thomas","id":"46242","last_name":"Schulte","first_name":"Thomas"}],"issue":"1","abstract":[{"lang":"eng","text":"Hybrid electric powertrains are developed for reducing the fuel consumption and consequently the emission of carbon dioxide. The fuel consumption of those systems depends significantly on the topology of the powertrain and the applied control strategy. For testing and improving the control strategy in terms of the overall system efficiency, Hardware-in-the-Loop (HIL) simulation can be applied. In order to operate the corresponding electronic control units in a virtual environment, it emulates the behavior of the actuator and sensor signals by a real-time simulation of the powertrain. Developing those powertrain models is a time-consuming task, due to high dynamics and high switching frequencies of the electrical subsystem and due to the large diversity of powertrain configurations. The electrical subsystem comprises the electric motor, inverter and battery whereas the different powertrain configurations are composed of the transmission, the combustion engine, the electric drives, etc.. Additionally, the correct power flow and losses within the powertrains components must be considered when HIL simulation is intended to be used for improving the control strategy.In this contribution a method for modeling arbitrary combinations of clutches and various types of gears is presented which enables an efficient modeling of transmission systems. The obtained models are real-time capable and the correct power flows and losses are considered. The method is applied to a powertrain with a two mode power-split transmission, which is a typical example comprising electric drives as well as shifting clutches. Finally simulation results will be presented."}]},{"citation":{"din1505-2-1":"Griese, Martin ; Pawlik, Thomas ; Schulte, Thomas: Methods for scaling a physical based CHP model for HIL simulation of smart combined grid systems. In: International ETG Congress 2015 ; Die Energiewende - Blueprints for the new energy age : VDE-Verlag, 2015","chicago-de":"Griese, Martin, Thomas Pawlik und Thomas Schulte. 2015. Methods for scaling a physical based CHP model for HIL simulation of smart combined grid systems. In: International ETG Congress 2015 ; Die Energiewende - Blueprints for the new energy age. VDE-Verlag.","short":"M. Griese, T. Pawlik, T. Schulte, in: International ETG Congress 2015 ; Die Energiewende - Blueprints for the New Energy Age, VDE-Verlag, 2015.","ufg":"Griese, Martin et. al. (2015): Methods for scaling a physical based CHP model for HIL simulation of smart combined grid systems, in: International ETG Congress 2015 ; Die Energiewende - Blueprints for the new energy age.","havard":"M. Griese, T. Pawlik, T. Schulte, Methods for scaling a physical based CHP model for HIL simulation of smart combined grid systems, in: International ETG Congress 2015 ; Die Energiewende - Blueprints for the New Energy Age, VDE-Verlag, 2015.","bjps":"Griese M, Pawlik T and Schulte T (2015) Methods for Scaling a Physical Based CHP Model for HIL Simulation of Smart Combined Grid Systems. International ETG Congress 2015 ; Die Energiewende - Blueprints for the New Energy Age. VDE-Verlag.","mla":"Griese, Martin, et al. “Methods for Scaling a Physical Based CHP Model for HIL Simulation of Smart Combined Grid Systems.” International ETG Congress 2015 ; Die Energiewende - Blueprints for the New Energy Age, VDE-Verlag, 2015.","van":"Griese M, Pawlik T, Schulte T. Methods for scaling a physical based CHP model for HIL simulation of smart combined grid systems. In: International ETG Congress 2015 ; Die Energiewende - Blueprints for the new energy age. VDE-Verlag; 2015.","ama":"Griese M, Pawlik T, Schulte T. Methods for scaling a physical based CHP model for HIL simulation of smart combined grid systems. In: International ETG Congress 2015 ; Die Energiewende - Blueprints for the New Energy Age. VDE-Verlag; 2015.","chicago":"Griese, Martin, Thomas Pawlik, and Thomas Schulte. “Methods for Scaling a Physical Based CHP Model for HIL Simulation of Smart Combined Grid Systems.” In International ETG Congress 2015 ; Die Energiewende - Blueprints for the New Energy Age. VDE-Verlag, 2015.","apa":"Griese, M., Pawlik, T., & Schulte, T. (2015). Methods for scaling a physical based CHP model for HIL simulation of smart combined grid systems. In International ETG Congress 2015 ; Die Energiewende - Blueprints for the new energy age. Bonn: VDE-Verlag.","ieee":"M. Griese, T. Pawlik, and T. Schulte, “Methods for scaling a physical based CHP model for HIL simulation of smart combined grid systems,” in International ETG Congress 2015 ; Die Energiewende - Blueprints for the new energy age, Bonn, 2015."},"publication_status":"published","title":"Methods for scaling a physical based CHP model for HIL simulation of smart combined grid systems","publisher":"VDE-Verlag","status":"public","abstract":[{"text":"In this contribution, a model-based method for analysing and designing energy systems comprising the electrical, thermal and chemical domain is presented. Beside the energy generation and consumption, the bidirectional coupling between all energy domains is considered, as well. This method is an adapted variant of the so called Hardware-in-the-Loop simulation where virtual energy components are combined with geographically distributed real energy components. In order to integrate the real components with minimal instrumentation efforts, measured quantities are included as information flows, only, while the physical power flows are connected to local available grid structures. The virtual energy components are represented by real-time capable models describing their physical behaviour. In this contribution, a CHP unit is described as a virtual energy component. The modelling approach is based on a time domain approach using state variables of the multiple domains to describe the dynamic behaviour. Afterwards, the model is parameterized by datasheet specifications and measurement data of several CHP units with different power ratings. Based on these results, a method for scaling the proposed CHP model is presented. Especially for parameter studies, this method allows a simple adaption of a general parameterized CHP model. Moreover, a method for scaling such models with respect to the modelling depth is proposed and exemplarily applied to the electrical generator of the CHP model. This scaling method enables the model adaptations for different simulation purposes like detailed investigations of single structures and holistic investigations of large combined grid systems.","lang":"eng"}],"year":2015,"main_file_link":[{"url":"https://ieeexplore.ieee.org/document/7388478"}],"author":[{"first_name":"Martin","last_name":"Griese","id":"52308","full_name":"Griese, Martin"},{"full_name":"Pawlik, Thomas","id":"58915","first_name":"Thomas","last_name":"Pawlik"},{"full_name":"Schulte, Thomas","first_name":"Thomas","last_name":"Schulte","id":"46242"}],"conference":{"name":" International ETG Congress 2015 ; Die Energiewende - Blueprints for the new energy age","location":"Bonn","start_date":"2015-11-17","end_date":"2015-11-18"},"department":[{"_id":"DEP6020"}],"user_id":"74004","date_updated":"2023-03-15T13:49:50Z","publication":" International ETG Congress 2015 ; Die Energiewende - Blueprints for the new energy age","publication_identifier":{"isbn":["978-3-8007-4121-2"]},"type":"conference","date_created":"2020-11-23T14:12:59Z","_id":"4014","language":[{"iso":"eng"}]},{"_id":"4016","language":[{"iso":"eng"}],"user_id":"74004","date_updated":"2023-03-15T13:49:50Z","date_created":"2020-11-23T14:28:39Z","type":"conference","publisher":"IEEE","status":"public","page":"1 - 8","abstract":[{"text":"Power electronic devices are growing in importance in automotive applications. Power converters are used in hybrid electric vehicles but also in other vehicle applications like electric steering systems for example. For testing electronic equipment, hardware-in-the-loop simulation is a today's standard method in the automotive industry. Hardware-in-the-loop simulation requires a real-time capable model of the plant but the development of those models of power electronic circuits is still an ambitious task due to the switching of the semiconductors devices. In this contribution, a FPGA-based hardware-in-the-loop simulation of a rectifier with power factor correction will be presented. First a short introduction on modelling methods for real-time simulation of power electronics and the rectifier with power factor correction is given. Furthermore, the modeling of the rectifier and the power factor correction stage and the simulation algorithm are described. Finally, the implementation of the hardware-in-the-loop simulation and measurement results from the real plant are presented and compared to the simulation results.","lang":"eng"}],"main_file_link":[{"url":"https://ieeexplore.ieee.org/document/7309202"}],"author":[{"last_name":"Kiffe","first_name":"Axel","id":"59764","full_name":"Kiffe, Axel"},{"full_name":"Schulte, Thomas","last_name":"Schulte","id":"46242","first_name":"Thomas"}],"year":2015,"department":[{"_id":"DEP6020"}],"conference":{"end_date":"2015-09-10","start_date":"2015-09-08","name":"17th European Conference on Power Electronics and Applications (EPE'15 ECCE-Europe)","location":"Geneva, Switzerland"},"citation":{"van":"Kiffe A, Schulte T. FPGA-based hardware-in-the-loop simulation of a rectifier with power factor correction. In IEEE; 2015. p. 1–8.","ufg":"Kiffe, Axel/Schulte, Thomas (2015): FPGA-based hardware-in-the-loop simulation of a rectifier with power factor correction, in: , S. 1–8.","mla":"Kiffe, Axel, and Thomas Schulte. FPGA-Based Hardware-in-the-Loop Simulation of a Rectifier with Power Factor Correction. IEEE, 2015, pp. 1–8.","bjps":"Kiffe A and Schulte T (2015) FPGA-Based Hardware-in-the-Loop Simulation of a Rectifier with Power Factor Correction. IEEE, pp. 1–8.","havard":"A. Kiffe, T. Schulte, FPGA-based hardware-in-the-loop simulation of a rectifier with power factor correction, in: IEEE, 2015: pp. 1–8.","apa":"Kiffe, A., & Schulte, T. (2015). FPGA-based hardware-in-the-loop simulation of a rectifier with power factor correction (pp. 1–8). Presented at the 17th European Conference on Power Electronics and Applications (EPE’15 ECCE-Europe), Geneva, Switzerland: IEEE.","chicago":"Kiffe, Axel, and Thomas Schulte. “FPGA-Based Hardware-in-the-Loop Simulation of a Rectifier with Power Factor Correction,” 1–8. IEEE, 2015.","short":"A. Kiffe, T. Schulte, in: IEEE, 2015, pp. 1–8.","din1505-2-1":"Kiffe, Axel ; Schulte, Thomas: FPGA-based hardware-in-the-loop simulation of a rectifier with power factor correction. In: : IEEE, 2015, S. 1–8","chicago-de":"Kiffe, Axel und Thomas Schulte. 2015. FPGA-based hardware-in-the-loop simulation of a rectifier with power factor correction. In: , 1–8. IEEE.","ama":"Kiffe A, Schulte T. FPGA-based hardware-in-the-loop simulation of a rectifier with power factor correction. In: IEEE; 2015:1-8.","ieee":"A. Kiffe and T. Schulte, “FPGA-based hardware-in-the-loop simulation of a rectifier with power factor correction,” presented at the 17th European Conference on Power Electronics and Applications (EPE’15 ECCE-Europe), Geneva, Switzerland, 2015, pp. 1–8."},"title":"FPGA-based hardware-in-the-loop simulation of a rectifier with power factor correction"},{"citation":{"short":"S. Geng, M. Brose, T. Schulte, in: VDI Verlag, Düsseldorf, 2015.","din1505-2-1":"Geng, Stefan ; Brose, M. ; Schulte, Thomas: Konfigurierbare und Echtzeitfähige Modelle von Getrieben mit gekoppelten Elektromotoren unter Berücksichtigung korrekter Verlustleistung. In: . Düsseldorf : VDI Verlag, 2015","chicago-de":"Geng, Stefan, M. Brose und Thomas Schulte. 2015. Konfigurierbare und Echtzeitfähige Modelle von Getrieben mit gekoppelten Elektromotoren unter Berücksichtigung korrekter Verlustleistung. In: . Düsseldorf: VDI Verlag.","van":"Geng S, Brose M, Schulte T. Konfigurierbare und Echtzeitfähige Modelle von Getrieben mit gekoppelten Elektromotoren unter Berücksichtigung korrekter Verlustleistung. In Düsseldorf: VDI Verlag; 2015.","ama":"Geng S, Brose M, Schulte T. Konfigurierbare und Echtzeitfähige Modelle von Getrieben mit gekoppelten Elektromotoren unter Berücksichtigung korrekter Verlustleistung. In: Düsseldorf: VDI Verlag; 2015.","ufg":"Geng, Stefan et. al. (2015): Konfigurierbare und Echtzeitfähige Modelle von Getrieben mit gekoppelten Elektromotoren unter Berücksichtigung korrekter Verlustleistung, in: , Düsseldorf.","havard":"S. Geng, M. Brose, T. Schulte, Konfigurierbare und Echtzeitfähige Modelle von Getrieben mit gekoppelten Elektromotoren unter Berücksichtigung korrekter Verlustleistung, in: VDI Verlag, Düsseldorf, 2015.","bjps":"Geng S, Brose M and Schulte T (2015) Konfigurierbare und Echtzeitfähige Modelle von Getrieben mit gekoppelten Elektromotoren unter Berücksichtigung korrekter Verlustleistung. Düsseldorf: VDI Verlag.","mla":"Geng, Stefan, et al. Konfigurierbare und Echtzeitfähige Modelle von Getrieben mit gekoppelten Elektromotoren unter Berücksichtigung korrekter Verlustleistung. VDI Verlag, 2015.","apa":"Geng, S., Brose, M., & Schulte, T. (2015). Konfigurierbare und Echtzeitfähige Modelle von Getrieben mit gekoppelten Elektromotoren unter Berücksichtigung korrekter Verlustleistung. Düsseldorf: VDI Verlag.","ieee":"S. Geng, M. Brose, and T. Schulte, “Konfigurierbare und Echtzeitfähige Modelle von Getrieben mit gekoppelten Elektromotoren unter Berücksichtigung korrekter Verlustleistung,” 2015.","chicago":"Geng, Stefan, M. Brose, and Thomas Schulte. “Konfigurierbare und Echtzeitfähige Modelle von Getrieben mit gekoppelten Elektromotoren unter Berücksichtigung korrekter Verlustleistung.” Düsseldorf: VDI Verlag, 2015."},"title":"Konfigurierbare und Echtzeitfähige Modelle von Getrieben mit gekoppelten Elektromotoren unter Berücksichtigung korrekter Verlustleistung","status":"public","publisher":"VDI Verlag","year":2015,"author":[{"first_name":"Stefan","full_name":"Geng, Stefan","id":"43696","last_name":"Geng"},{"last_name":"Brose","full_name":"Brose, M.","first_name":"M."},{"last_name":"Schulte","first_name":"Thomas","full_name":"Schulte, Thomas","id":"46242"}],"department":[{"_id":"DEP6020"}],"abstract":[{"text":"In diesem Beitrag wurde eine Vorgehenswelse vorgestellt, mit der echtzeitfähige Modelle beliebiger Konfigurationen von Übersetzungen, Kupplungen und weiteren mechanischen Elementen kombiniert mit Elektromotoren erstellt werden können. Außerdem berücksichtigen diese Modelle die Verlustleistungen im System und können somit zur Auslegung von Betriebsstrategien am HIL-System verwendet werden. Die Vorgehenswelse ist in vier Schritte unterteilt und unter Matlab/Slmulink implementiert. Durch die Wahl dieser in der HIL-Simulation weitverbreiteten Modellierungsumgebung können weitere Matlab/Simullnk basierte Streckenmodelle eingebunden werden und die zur HIL-Simulation benötigte Kopplung zu den Steuergeräteschnittstellen effizient durchgeführt werden. Aufgrund einer graphischen Darstellung der Systeme und einer halbautomatisierten Erstellung der Modelle ist der Ansatz entsprechend flexibel gegenüber Systemmodifikationen. Die Modellierungsmethode wurde anhand von Simulationen für einen Beispielantriebsstrang validiert.","lang":"ger"}],"user_id":"74004","date_updated":"2023-03-15T13:49:50Z","type":"conference","date_created":"2020-11-23T14:32:55Z","place":"Düsseldorf","language":[{"iso":"ger"}],"_id":"4017"},{"date_created":"2020-11-23T14:39:24Z","publication_identifier":{"issn":["2148-7847"]},"publication":"Journal of Thermal Engineering","date_updated":"2023-03-15T13:49:50Z","language":[{"iso":"eng"}],"title":"A holistic modeling and simulation approach to optimize a smart combined grid system of different renewable energies","volume":1,"citation":{"ama":"Griese M, Schulte T, Maas J. A holistic modeling and simulation approach to optimize a smart combined grid system of different renewable energies. Journal of Thermal Engineering. 2015;1(6):467-487.","ieee":"M. Griese, T. Schulte, and J. Maas, “A holistic modeling and simulation approach to optimize a smart combined grid system of different renewable energies,” Journal of Thermal Engineering, vol. 1, no. 6, pp. 467–487, 2015.","chicago-de":"Griese, Martin, Thomas Schulte und Jürgen Maas. 2015. A holistic modeling and simulation approach to optimize a smart combined grid system of different renewable energies. Journal of Thermal Engineering 1, Nr. 6: 467–487.","din1505-2-1":"Griese, Martin ; Schulte, Thomas ; Maas, Jürgen: A holistic modeling and simulation approach to optimize a smart combined grid system of different renewable energies. In: Journal of Thermal Engineering Bd. 1. Istanbul, Yildiz Technical University (2015), Nr. 6, S. 467–487","short":"M. Griese, T. Schulte, J. Maas, Journal of Thermal Engineering 1 (2015) 467–487.","ufg":"Griese, Martin et. al. (2015): A holistic modeling and simulation approach to optimize a smart combined grid system of different renewable energies, in: Journal of Thermal Engineering 1 (6), S. 467–487.","mla":"Griese, Martin, et al. “A Holistic Modeling and Simulation Approach to Optimize a Smart Combined Grid System of Different Renewable Energies.” Journal of Thermal Engineering, vol. 1, no. 6, Yildiz Technical University , 2015, pp. 467–87.","bjps":"Griese M, Schulte T and Maas J (2015) A Holistic Modeling and Simulation Approach to Optimize a Smart Combined Grid System of Different Renewable Energies. Journal of Thermal Engineering 1, 467–487.","havard":"M. Griese, T. Schulte, J. Maas, A holistic modeling and simulation approach to optimize a smart combined grid system of different renewable energies, Journal of Thermal Engineering. 1 (2015) 467–487.","van":"Griese M, Schulte T, Maas J. A holistic modeling and simulation approach to optimize a smart combined grid system of different renewable energies. Journal of Thermal Engineering. 2015;1(6):467–87.","chicago":"Griese, Martin, Thomas Schulte, and Jürgen Maas. “A Holistic Modeling and Simulation Approach to Optimize a Smart Combined Grid System of Different Renewable Energies.” Journal of Thermal Engineering 1, no. 6 (2015): 467–87.","apa":"Griese, M., Schulte, T., & Maas, J. (2015). A holistic modeling and simulation approach to optimize a smart combined grid system of different renewable energies. Journal of Thermal Engineering, 1(6), 467–487."},"year":2015,"author":[{"last_name":"Griese","id":"52308","full_name":"Griese, Martin","first_name":"Martin"},{"first_name":"Thomas","full_name":"Schulte, Thomas","id":"46242","last_name":"Schulte"},{"last_name":"Maas","first_name":"Jürgen","id":"1827","full_name":"Maas, Jürgen"}],"main_file_link":[{"url":"file:///C:/Users/czr-e2t/AppData/Local/Temp/JTEN-2015-1-6.795.pdf"}],"page":"467 - 487","status":"public","type":"journal_article","user_id":"74004","intvolume":" 1","place":"Istanbul","_id":"4018","publication_status":"published","article_type":"original","department":[{"_id":"DEP6020"}],"issue":"6","abstract":[{"text":"In this contribution, a model-based method for analyzing and designing energy systems comprising the electrical, thermal and chemical domains is presented. Beside the energy generation and consumption, the bidirectional coupling between all energy domains is considered, as well. This method is an adapted variant of the so called Hardware-in-the-Loop simulation where virtual energy components are combined with geographically distributed real energy components. In order to integrate the real components with minimal instrumentation efforts, measured quantities are included as information flows, only, while the physical power flows are connected to local available grid structures. This virtual coupling has the further advantage of a simple scalability so that existing real components can be used for different applications. The virtual energy components are represented by real-time capable models describing their physical behavior. In this contribution, a CHP unit is described as a first virtual energy component. The modeling approach is based on a time domain approach using state variables of the multiple domains to describe the dynamic behavior. Furthermore, the model is scalable regarding the modeling depth and the power ratings which allows an application for different simulation scenarios. Besides the modeling of a standalone CHP unit, its integration into a simulated electrical grid is discussed as well. Afterwards, the overall model is parameterized and validated with data of a medium size CHP unit. Finally, the model is used for simulations of an exemplary electrical grid.","lang":"eng"}],"publisher":"Yildiz Technical University "},{"corporate_editor":["Hochschule Ostwestfalen-Lippe"],"editor":[{"last_name":"Schwickert","first_name":"Susanne","full_name":"Schwickert, Susanne","id":"27269"}],"date_updated":"2023-03-15T13:49:50Z","publication":"Detmolder Bauphysiktag 2015","publication_identifier":{"isbn":["978-3-8440-3484-4"]},"date_created":"2020-11-23T14:45:15Z","language":[{"iso":"ger"}],"citation":{"short":"T. Schulte, M. Griese, T. Pawlik, J. Maas, in: S. Schwickert, Hochschule Ostwestfalen-Lippe (Eds.), Detmolder Bauphysiktag 2015, Shaker Verlag, Aachen, 2015, pp. 117–126.","din1505-2-1":"Schulte, Thomas ; Griese, Martin ; Pawlik, Thomas ; Maas, Jürgen: Smart Energy Village – Ein Forschungsansatz für die Energieversorgung der Zukunft. In: Schwickert, S. ; Hochschule Ostwestfalen-Lippe (Hrsg.): Detmolder Bauphysiktag 2015, Detmolder Bauphysiktag. Bd. 2015. Aachen : Shaker Verlag, 2015, S. 117–126","chicago-de":"Schulte, Thomas, Martin Griese, Thomas Pawlik und Jürgen Maas. 2015. Smart Energy Village – Ein Forschungsansatz für die Energieversorgung der Zukunft. In: Detmolder Bauphysiktag 2015, hg. von Susanne Schwickert und Hochschule Ostwestfalen-Lippe, 2015:117–126. Detmolder Bauphysiktag. Aachen: Shaker Verlag.","apa":"Schulte, T., Griese, M., Pawlik, T., & Maas, J. (2015). Smart Energy Village – Ein Forschungsansatz für die Energieversorgung der Zukunft. In S. Schwickert & Hochschule Ostwestfalen-Lippe (Eds.), Detmolder Bauphysiktag 2015 (Vol. 2015, pp. 117–126). Aachen: Shaker Verlag.","chicago":"Schulte, Thomas, Martin Griese, Thomas Pawlik, and Jürgen Maas. “Smart Energy Village – Ein Forschungsansatz für die Energieversorgung der Zukunft.” In Detmolder Bauphysiktag 2015, edited by Susanne Schwickert and Hochschule Ostwestfalen-Lippe, 2015:117–26. Detmolder Bauphysiktag. Aachen: Shaker Verlag, 2015.","van":"Schulte T, Griese M, Pawlik T, Maas J. Smart Energy Village – Ein Forschungsansatz für die Energieversorgung der Zukunft. In: Schwickert S, Hochschule Ostwestfalen-Lippe, editors. Detmolder Bauphysiktag 2015. Aachen: Shaker Verlag; 2015. p. 117–26. (Detmolder Bauphysiktag; vol. 2015).","ufg":"Schulte, Thomas et. al. (2015): Smart Energy Village – Ein Forschungsansatz für die Energieversorgung der Zukunft, in: Susanne Schwickert/Hochschule Ostwestfalen-Lippe (Hgg.): Detmolder Bauphysiktag 2015 (=Detmolder Bauphysiktag 2015), Aachen, S. 117–126.","bjps":"Schulte T et al. (2015) Smart Energy Village – Ein Forschungsansatz für die Energieversorgung der Zukunft. In Schwickert S and Hochschule Ostwestfalen-Lippe (eds), Detmolder Bauphysiktag 2015, vol. 2015. Aachen: Shaker Verlag, pp. 117–126.","havard":"T. Schulte, M. Griese, T. Pawlik, J. Maas, Smart Energy Village – Ein Forschungsansatz für die Energieversorgung der Zukunft, in: S. Schwickert, Hochschule Ostwestfalen-Lippe (Eds.), Detmolder Bauphysiktag 2015, Shaker Verlag, Aachen, 2015: pp. 117–126.","mla":"Schulte, Thomas, et al. “Smart Energy Village – Ein Forschungsansatz für die Energieversorgung der Zukunft.” Detmolder Bauphysiktag 2015, edited by Susanne Schwickert and Hochschule Ostwestfalen-Lippe, vol. 2015, Shaker Verlag, 2015, pp. 117–26.","ieee":"T. Schulte, M. Griese, T. Pawlik, and J. Maas, “Smart Energy Village – Ein Forschungsansatz für die Energieversorgung der Zukunft,” in Detmolder Bauphysiktag 2015, vol. 2015, S. Schwickert and Hochschule Ostwestfalen-Lippe, Eds. Aachen: Shaker Verlag, 2015, pp. 117–126.","ama":"Schulte T, Griese M, Pawlik T, Maas J. Smart Energy Village – Ein Forschungsansatz für die Energieversorgung der Zukunft. In: Schwickert S, Hochschule Ostwestfalen-Lippe, eds. Detmolder Bauphysiktag 2015. Vol 2015. Detmolder Bauphysiktag. Aachen: Shaker Verlag; 2015:117-126."},"volume":2015,"title":"Smart Energy Village – Ein Forschungsansatz für die Energieversorgung der Zukunft","status":"public","page":"117 - 126","author":[{"id":"46242","full_name":"Schulte, Thomas","last_name":"Schulte","first_name":"Thomas"},{"last_name":"Griese","id":"52308","first_name":"Martin","full_name":"Griese, Martin"},{"first_name":"Thomas","last_name":"Pawlik","id":"58915","full_name":"Pawlik, Thomas"},{"id":"1827","full_name":"Maas, Jürgen","first_name":"Jürgen","last_name":"Maas"}],"year":2015,"intvolume":" 2015","user_id":"74004","type":"book_chapter","_id":"4019","place":"Aachen","publication_status":"published","series_title":"Detmolder Bauphysiktag","publisher":"Shaker Verlag","abstract":[{"lang":"ger","text":"Im Rahmen dieses Beitrages wurde die Notwendigkeit intelligenter, gekoppelter Verbundsysteme diskutiert und ein wissenschaftlicher Ansatz zur Optimierung solcher Systeme vorgestellt. Der Ansatz basiert auf einer ganzheitlichen Betrachtung im Rahmen einer Echtzeitsimulation mit gekoppelten realen Komponenten. Zur virtuellen Koppelung wird ein Simulationsmanager eingesetzt, der eine Skalierung der realen Komponenten erlaubt. Dies ermöglicht eine einfache Adaptierung von realen und simulierten Komponenten an das jeweils betrachtete Szenario. Als eine erste simulierte Komponente wurde eine KWK-Anlage untersucht und bezüglich der elektrischen, thermischen, mechanischen und chemischen Domänen modelliert. Das Gesamtmodell berücksichtigt das Verhalten des Verbrennungsmotors, des Synchrongenerators und der Wärmeübertrager. Mit Hilfe von Messgrößen einer realen KWK-Anlage wurde im Anschluss das Gesamtmodell validiert. Die generierten Simulationsergebnisse weisen eine gute Übereinstimmung mit den erhobenen Messdaten auf. Aktuell werden weitere Energiekomponenten untersucht, um Energiesysteme ganzheitlich optimieren zu können.\r\nDieser Beitrag ist im Rahmen des vom Land NRW geförderten Forschungsschwerpunktes „Intelligente Energiesysteme (IES)“ im Projekt „Smart Energy Village“ entstanden."}],"department":[{"_id":"DEP6020"}]},{"type":"conference","user_id":"74004","has_accepted_license":"1","_id":"4039","place":"Red Hook","file":[{"access_level":"local","file_name":"BA003.pdf","date_created":"2020-11-24T10:08:07Z","content_type":"application/pdf","file_id":"4040","file_size":534753,"creator":"czr-e2t","relation":"main_file","date_updated":"2020-11-24T10:08:07Z"}],"publication_status":"published","abstract":[{"text":"Hardware-in-the-loop simulation of power electronic devices is growing in importance in diverse fields. For testing the electronic control units in automotive applications hardware-in-the-loop simulation is a today's standard method. It is also applied for many industrial applications like power converters and electric drives. Anyway real-time capable models of power electronics are required. In this contribution, a novel approach for real-time simulation of power electronic circuits comprising fast FPGA-based output models is presented. Two types of modeling circuits are described and compared to each other. Both methods do not fulfill the requirements of the novel approach to combine the advantages of the processor- and FPGA-based simulation. Hence, parts of both methods were combined. Additionally, the switching event detection was improved for low latency reaction and a correction method based on average control is described. The simulation results matches to the reference very well. Therefore the novel approach Is an interesting alternative for hardware-in-the-loop simulation when the algorithm of the electronic control unit requires a very fast reaction on switching events.","lang":"eng"}],"ddc":["530"],"department":[{"_id":"DEP6020"}],"publisher":"Curran Associates, Inc.","publication_identifier":{"isbn":["978-1-62993-308-5"]},"publication":"PCIM Europe, International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2013","date_created":"2020-11-24T10:04:46Z","file_date_updated":"2020-11-24T10:08:07Z","date_updated":"2023-03-15T13:49:50Z","language":[{"iso":"eng"}],"title":"Novel Approach for Real-time Simulation of Power Eiectronic Circuits Comprising Fast FPGA-based Output Modeis","citation":{"short":"A. Kiffe, M. Brose, T. Schulte, in: PCIM Europe, International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2013, Curran Associates, Inc., Red Hook, 2015, pp. 1688–1695.","chicago-de":"Kiffe, Axel, Manuel Brose und Thomas Schulte. 2015. Novel Approach for Real-time Simulation of Power Eiectronic Circuits Comprising Fast FPGA-based Output Modeis. In: PCIM Europe, International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2013, 1688–1695. Red Hook: Curran Associates, Inc.","din1505-2-1":"Kiffe, Axel ; Brose, Manuel ; Schulte, Thomas: Novel Approach for Real-time Simulation of Power Eiectronic Circuits Comprising Fast FPGA-based Output Modeis. In: PCIM Europe, International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2013. Red Hook : Curran Associates, Inc., 2015, S. 1688–1695","ieee":"A. Kiffe, M. Brose, and T. Schulte, “Novel Approach for Real-time Simulation of Power Eiectronic Circuits Comprising Fast FPGA-based Output Modeis,” in PCIM Europe, International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2013, 2015, pp. 1688–1695.","apa":"Kiffe, A., Brose, M., & Schulte, T. (2015). Novel Approach for Real-time Simulation of Power Eiectronic Circuits Comprising Fast FPGA-based Output Modeis. In PCIM Europe, International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2013 (pp. 1688–1695). Red Hook: Curran Associates, Inc.","chicago":"Kiffe, Axel, Manuel Brose, and Thomas Schulte. “Novel Approach for Real-Time Simulation of Power Eiectronic Circuits Comprising Fast FPGA-Based Output Modeis.” In PCIM Europe, International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2013, 1688–95. Red Hook: Curran Associates, Inc., 2015.","ama":"Kiffe A, Brose M, Schulte T. Novel Approach for Real-time Simulation of Power Eiectronic Circuits Comprising Fast FPGA-based Output Modeis. In: PCIM Europe, International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2013. Red Hook: Curran Associates, Inc.; 2015:1688-1695.","van":"Kiffe A, Brose M, Schulte T. Novel Approach for Real-time Simulation of Power Eiectronic Circuits Comprising Fast FPGA-based Output Modeis. In: PCIM Europe, International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2013. Red Hook: Curran Associates, Inc.; 2015. p. 1688–95.","mla":"Kiffe, Axel, et al. “Novel Approach for Real-Time Simulation of Power Eiectronic Circuits Comprising Fast FPGA-Based Output Modeis.” PCIM Europe, International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2013, Curran Associates, Inc., 2015, pp. 1688–95.","havard":"A. Kiffe, M. Brose, T. Schulte, Novel Approach for Real-time Simulation of Power Eiectronic Circuits Comprising Fast FPGA-based Output Modeis, in: PCIM Europe, International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2013, Curran Associates, Inc., Red Hook, 2015: pp. 1688–1695.","bjps":"Kiffe A, Brose M and Schulte T (2015) Novel Approach for Real-Time Simulation of Power Eiectronic Circuits Comprising Fast FPGA-Based Output Modeis. PCIM Europe, International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2013. Red Hook: Curran Associates, Inc., pp. 1688–1695.","ufg":"Kiffe, Axel et. al. (2015): Novel Approach for Real-time Simulation of Power Eiectronic Circuits Comprising Fast FPGA-based Output Modeis, in: PCIM Europe, International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2013, Red Hook, S. 1688–1695."},"author":[{"first_name":"Axel","full_name":"Kiffe, Axel","id":"59764","last_name":"Kiffe"},{"full_name":"Brose, Manuel","first_name":"Manuel","last_name":"Brose"},{"full_name":"Schulte, Thomas","last_name":"Schulte","id":"46242","first_name":"Thomas"}],"year":2015,"status":"public","page":"1688 - 1695"},{"type":"conference_abstract","date_created":"2020-11-25T09:50:47Z","user_id":"74004","date_updated":"2023-03-15T13:49:50Z","_id":"4089","language":[{"iso":"eng"}],"title":"Concept of a bidirectional Power-to-X Process System for technical and economical Investigations of Conversion and Storage Technologies","citation":{"ama":"Pawlik T, Griese M, Dohmann J, Maas J, Schulte T. Concept of a bidirectional Power-to-X Process System for technical and economical Investigations of Conversion and Storage Technologies. In: ; 2015.","ieee":"T. Pawlik, M. Griese, J. Dohmann, J. Maas, and T. Schulte, “Concept of a bidirectional Power-to-X Process System for technical and economical Investigations of Conversion and Storage Technologies,” presented at the ECRES 2015, Antalya, Türkei, 2015.","chicago-de":"Pawlik, Thomas, Martin Griese, Joachim Dohmann, Jürgen Maas und Thomas Schulte. 2015. Concept of a bidirectional Power-to-X Process System for technical and economical Investigations of Conversion and Storage Technologies. In: .","din1505-2-1":"Pawlik, Thomas ; Griese, Martin ; Dohmann, Joachim ; Maas, Jürgen ; Schulte, Thomas: Concept of a bidirectional Power-to-X Process System for technical and economical Investigations of Conversion and Storage Technologies. In: , 2015","short":"T. Pawlik, M. Griese, J. Dohmann, J. Maas, T. Schulte, in: 2015.","bjps":"Pawlik T et al. (2015) Concept of a Bidirectional Power-to-X Process System for Technical and Economical Investigations of Conversion and Storage Technologies.","mla":"Pawlik, Thomas, et al. Concept of a Bidirectional Power-to-X Process System for Technical and Economical Investigations of Conversion and Storage Technologies. 2015.","havard":"T. Pawlik, M. Griese, J. Dohmann, J. Maas, T. Schulte, Concept of a bidirectional Power-to-X Process System for technical and economical Investigations of Conversion and Storage Technologies, in: 2015.","ufg":"Pawlik, Thomas et. al. (2015): Concept of a bidirectional Power-to-X Process System for technical and economical Investigations of Conversion and Storage Technologies, in: .","van":"Pawlik T, Griese M, Dohmann J, Maas J, Schulte T. Concept of a bidirectional Power-to-X Process System for technical and economical Investigations of Conversion and Storage Technologies. In 2015.","chicago":"Pawlik, Thomas, Martin Griese, Joachim Dohmann, Jürgen Maas, and Thomas Schulte. “Concept of a Bidirectional Power-to-X Process System for Technical and Economical Investigations of Conversion and Storage Technologies,” 2015.","apa":"Pawlik, T., Griese, M., Dohmann, J., Maas, J., & Schulte, T. (2015). Concept of a bidirectional Power-to-X Process System for technical and economical Investigations of Conversion and Storage Technologies. Presented at the ECRES 2015, Antalya, Türkei."},"year":2015,"author":[{"id":"58915","first_name":"Thomas","full_name":"Pawlik, Thomas","last_name":"Pawlik"},{"first_name":"Martin","last_name":"Griese","id":"52308","full_name":"Griese, Martin"},{"first_name":"Joachim","id":"5089","last_name":"Dohmann","full_name":"Dohmann, Joachim"},{"first_name":"Jürgen","last_name":"Maas","full_name":"Maas, Jürgen","id":"1827"},{"first_name":"Thomas","last_name":"Schulte","full_name":"Schulte, Thomas","id":"46242"}],"department":[{"_id":"DEP6020"}],"conference":{"location":"Antalya, Türkei","name":"ECRES 2015"},"status":"public"},{"publisher":"Public Verlagsgesellschaft und Anzeigenagentur mbH","status":"public","page":"41","issue":"April","year":2015,"author":[{"full_name":"Mambetow, Artur","id":"51936","last_name":"Mambetow","first_name":"Artur"},{"full_name":"Neufeld, Ruben","id":"51937","last_name":"Neufeld","first_name":"Ruben"},{"first_name":"Holger","full_name":"Borcherding, Holger","last_name":"Borcherding","id":"1693"}],"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"citation":{"ama":"Mambetow A, Neufeld R, Borcherding H. Drehzahlvariabler Betrieb von Blockheizkraftwerken – Ein Konzept mit vielen Vorteilen. Ingenieur-Spiegel. 2015;(April):41.","ieee":"A. Mambetow, R. Neufeld, and H. Borcherding, “Drehzahlvariabler Betrieb von Blockheizkraftwerken – Ein Konzept mit vielen Vorteilen,” Ingenieur-Spiegel, no. April, p. 41, 2015.","van":"Mambetow A, Neufeld R, Borcherding H. Drehzahlvariabler Betrieb von Blockheizkraftwerken – Ein Konzept mit vielen Vorteilen. Ingenieur-Spiegel. 2015;(April):41.","ufg":"Mambetow, Artur et. al. (2015): Drehzahlvariabler Betrieb von Blockheizkraftwerken – Ein Konzept mit vielen Vorteilen, in: Ingenieur-Spiegel (April), S. 41.","mla":"Mambetow, Artur, et al. “Drehzahlvariabler Betrieb von Blockheizkraftwerken – Ein Konzept mit vielen Vorteilen.” Ingenieur-Spiegel, no. April, Public Verlagsgesellschaft und Anzeigenagentur mbH, 2015, p. 41.","havard":"A. Mambetow, R. Neufeld, H. Borcherding, Drehzahlvariabler Betrieb von Blockheizkraftwerken – Ein Konzept mit vielen Vorteilen, Ingenieur-Spiegel. (2015) 41.","bjps":"Mambetow A, Neufeld R and Borcherding H (2015) Drehzahlvariabler Betrieb von Blockheizkraftwerken – Ein Konzept mit vielen Vorteilen. Ingenieur-Spiegel 41.","apa":"Mambetow, A., Neufeld, R., & Borcherding, H. (2015). Drehzahlvariabler Betrieb von Blockheizkraftwerken – Ein Konzept mit vielen Vorteilen. Ingenieur-Spiegel, (April), 41.","chicago":"Mambetow, Artur, Ruben Neufeld, and Holger Borcherding. “Drehzahlvariabler Betrieb von Blockheizkraftwerken – Ein Konzept mit vielen Vorteilen.” Ingenieur-Spiegel, no. April (2015): 41.","short":"A. Mambetow, R. Neufeld, H. Borcherding, Ingenieur-Spiegel (2015) 41.","din1505-2-1":"Mambetow, Artur ; Neufeld, Ruben ; Borcherding, Holger: Drehzahlvariabler Betrieb von Blockheizkraftwerken – Ein Konzept mit vielen Vorteilen. In: Ingenieur-Spiegel. Bingen, Public Verlagsgesellschaft und Anzeigenagentur mbH (2015), Nr. April, S. 41","chicago-de":"Mambetow, Artur, Ruben Neufeld und Holger Borcherding. 2015. Drehzahlvariabler Betrieb von Blockheizkraftwerken – Ein Konzept mit vielen Vorteilen. Ingenieur-Spiegel, Nr. April: 41."},"publication_status":"published","title":"Drehzahlvariabler Betrieb von Blockheizkraftwerken – Ein Konzept mit vielen Vorteilen","_id":"4241","place":"Bingen","language":[{"iso":"ger"}],"user_id":"74004","date_updated":"2023-03-15T13:49:51Z","publication_identifier":{"issn":["1868-5919"]},"publication":"Ingenieur-Spiegel","type":"journal_article","date_created":"2020-12-10T12:34:19Z"},{"date_updated":"2023-03-15T13:49:51Z","user_id":"74004","date_created":"2020-12-10T12:16:36Z","type":"journal_article","publication_identifier":{"issn":["1612-6475"]},"publication":"automation","language":[{"iso":"ger"}],"place":"Gilching","_id":"4242","publication_status":"published","citation":{"short":"H. Borcherding, automation (2015) 34–35.","din1505-2-1":"Borcherding, Holger: Holzbearbeitung 4.0. In: automation. Gilching, Heinrich Publikationen GmbH (2015), Nr. 3, S. 34–35","chicago-de":"Borcherding, Holger. 2015. Holzbearbeitung 4.0. automation, Nr. 3: 34–35.","apa":"Borcherding, H. (2015). Holzbearbeitung 4.0. automation, (3), 34–35.","chicago":"Borcherding, Holger. “Holzbearbeitung 4.0.” automation, no. 3 (2015): 34–35.","van":"Borcherding H. Holzbearbeitung 4.0. automation. 2015;(3):34–5.","bjps":"Borcherding H (2015) Holzbearbeitung 4.0. automation 34–35.","havard":"H. Borcherding, Holzbearbeitung 4.0, automation. (2015) 34–35.","mla":"Borcherding, Holger. “Holzbearbeitung 4.0.” automation, no. 3, Heinrich Publikationen GmbH, 2015, pp. 34–35.","ufg":"Borcherding, Holger (2015): Holzbearbeitung 4.0, in: automation (3), S. 34–35.","ieee":"H. Borcherding, “Holzbearbeitung 4.0,” automation, no. 3, pp. 34–35, 2015.","ama":"Borcherding H. Holzbearbeitung 4.0. automation. 2015;(3):34-35."},"title":"Holzbearbeitung 4.0","page":"34 - 35","status":"public","publisher":"Heinrich Publikationen GmbH","department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"year":2015,"author":[{"full_name":"Borcherding, Holger","first_name":"Holger","last_name":"Borcherding","id":"1693"}],"issue":"3"},{"publication_identifier":{"issn":["1614-6514"]},"publication":"Holz- und Möbelindustrie Deutschland : Informationen für die Wirtschaft","date_created":"2020-12-10T12:20:24Z","type":"journal_article","user_id":"74004","date_updated":"2023-03-15T13:49:51Z","_id":"4243","place":"Villingen-Schwenningen","language":[{"iso":"ger"}],"title":"Besser bohren - Projekt optimiert Bohrprozess in der Holzbearbeitung","citation":{"short":"H. Borcherding, Holz- und Möbelindustrie Deutschland : Informationen für die Wirtschaft (2015) 19.","chicago-de":"Borcherding, Holger. 2015. Besser bohren - Projekt optimiert Bohrprozess in der Holzbearbeitung. Holz- und Möbelindustrie Deutschland : Informationen für die Wirtschaft, Nr. März: 19.","din1505-2-1":"Borcherding, Holger: Besser bohren - Projekt optimiert Bohrprozess in der Holzbearbeitung. In: Holz- und Möbelindustrie Deutschland : Informationen für die Wirtschaft. Villingen-Schwenningen, Kuhn (2015), Nr. März, S. 19","van":"Borcherding H. Besser bohren - Projekt optimiert Bohrprozess in der Holzbearbeitung. Holz- und Möbelindustrie Deutschland : Informationen für die Wirtschaft. 2015;(März):19.","bjps":"Borcherding H (2015) Besser bohren - Projekt optimiert Bohrprozess in der Holzbearbeitung. Holz- und Möbelindustrie Deutschland : Informationen für die Wirtschaft 19.","havard":"H. Borcherding, Besser bohren - Projekt optimiert Bohrprozess in der Holzbearbeitung, Holz- und Möbelindustrie Deutschland : Informationen für die Wirtschaft. (2015) 19.","mla":"Borcherding, Holger. “Besser bohren - Projekt optimiert Bohrprozess in der Holzbearbeitung.” Holz- und Möbelindustrie Deutschland : Informationen für die Wirtschaft, no. März, Kuhn, 2015, p. 19.","ufg":"Borcherding, Holger (2015): Besser bohren - Projekt optimiert Bohrprozess in der Holzbearbeitung, in: Holz- und Möbelindustrie Deutschland : Informationen für die Wirtschaft (März), S. 19.","apa":"Borcherding, H. (2015). Besser bohren - Projekt optimiert Bohrprozess in der Holzbearbeitung. Holz- und Möbelindustrie Deutschland : Informationen für die Wirtschaft, (März), 19.","chicago":"Borcherding, Holger. “Besser bohren - Projekt optimiert Bohrprozess in der Holzbearbeitung.” Holz- und Möbelindustrie Deutschland : Informationen für die Wirtschaft, no. März (2015): 19.","ama":"Borcherding H. Besser bohren - Projekt optimiert Bohrprozess in der Holzbearbeitung. Holz- und Möbelindustrie Deutschland : Informationen für die Wirtschaft. 2015;(März):19.","ieee":"H. Borcherding, “Besser bohren - Projekt optimiert Bohrprozess in der Holzbearbeitung,” Holz- und Möbelindustrie Deutschland : Informationen für die Wirtschaft, no. März, p. 19, 2015."},"publication_status":"published","issue":"März","author":[{"full_name":"Borcherding, Holger","first_name":"Holger","last_name":"Borcherding","id":"1693"}],"year":2015,"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"publisher":"Kuhn","status":"public","page":"19"},{"status":"public","page":"42 - 45","publisher":"Vereinigte Fachverlage","author":[{"first_name":"Holger","id":"1693","last_name":"Borcherding","full_name":"Borcherding, Holger"}],"year":2015,"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"issue":"08","citation":{"ama":"Borcherding H. Auf dem Weg zum “mitdenkenden” Antrieb. antriebstechnik. 2015;(08):42-45.","van":"Borcherding H. Auf dem Weg zum “mitdenkenden” Antrieb. antriebstechnik. 2015;(08):42–5.","mla":"Borcherding, Holger. “Auf dem Weg zum ‘mitdenkenden’ Antrieb.” antriebstechnik, no. 08, Vereinigte Fachverlage, 2015, pp. 42–45.","havard":"H. Borcherding, Auf dem Weg zum “mitdenkenden” Antrieb, antriebstechnik. (2015) 42–45.","bjps":"Borcherding H (2015) Auf dem Weg zum ‘mitdenkenden’ Antrieb. antriebstechnik 42–45.","ufg":"Borcherding, Holger (2015): Auf dem Weg zum „mitdenkenden“ Antrieb, in: antriebstechnik (08), S. 42–45.","ieee":"H. Borcherding, “Auf dem Weg zum ‘mitdenkenden’ Antrieb,” antriebstechnik, no. 08, pp. 42–45, 2015.","apa":"Borcherding, H. (2015). Auf dem Weg zum “mitdenkenden” Antrieb. antriebstechnik, (08), 42–45.","chicago":"Borcherding, Holger. “Auf dem Weg zum ‘mitdenkenden’ Antrieb.” antriebstechnik, no. 08 (2015): 42–45.","short":"H. Borcherding, antriebstechnik (2015) 42–45.","chicago-de":"Borcherding, Holger. 2015. Auf dem Weg zum „mitdenkenden“ Antrieb. antriebstechnik, Nr. 08: 42–45.","din1505-2-1":"Borcherding, Holger: Auf dem Weg zum „mitdenkenden“ Antrieb. In: antriebstechnik. Mainz, Vereinigte Fachverlage (2015), Nr. 08, S. 42–45"},"publication_status":"published","title":"Auf dem Weg zum \"mitdenkenden\" Antrieb","place":"Mainz","language":[{"iso":"ger"}],"_id":"4244","user_id":"74004","date_updated":"2023-03-15T13:49:51Z","publication":"antriebstechnik","date_created":"2020-12-10T12:25:08Z","type":"journal_article"},{"_id":"4245","language":[{"iso":"ger"}],"place":"Bad Saulgau","date_created":"2020-12-10T12:30:05Z","type":"journal_article","publication_identifier":{"issn":["0016-4232"]},"publication":"Galvanotechnik : das Innovationsmagazin ","date_updated":"2023-03-15T13:49:51Z","user_id":"74004","issue":"09","department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"year":2015,"author":[{"id":"1693","first_name":"Holger","last_name":"Borcherding","full_name":"Borcherding, Holger"}],"publisher":"Leuze","page":"1808 - 1812","status":"public","title":"Ostwestfalen-Lippe: Elektronikprototypen von der Hochschule","publication_status":"published","citation":{"short":"H. Borcherding, Galvanotechnik : das Innovationsmagazin (2015) 1808–1812.","din1505-2-1":"Borcherding, Holger: Ostwestfalen-Lippe: Elektronikprototypen von der Hochschule. In: Galvanotechnik : das Innovationsmagazin . Bad Saulgau, Leuze (2015), Nr. 09, S. 1808–1812","chicago-de":"Borcherding, Holger. 2015. Ostwestfalen-Lippe: Elektronikprototypen von der Hochschule. Galvanotechnik : das Innovationsmagazin , Nr. 09: 1808–1812.","apa":"Borcherding, H. (2015). Ostwestfalen-Lippe: Elektronikprototypen von der Hochschule. Galvanotechnik : das Innovationsmagazin , (09), 1808–1812.","chicago":"Borcherding, Holger. “Ostwestfalen-Lippe: Elektronikprototypen von der Hochschule.” Galvanotechnik : das Innovationsmagazin , no. 09 (2015): 1808–12.","van":"Borcherding H. Ostwestfalen-Lippe: Elektronikprototypen von der Hochschule. Galvanotechnik : das Innovationsmagazin . 2015;(09):1808–12.","bjps":"Borcherding H (2015) Ostwestfalen-Lippe: Elektronikprototypen von der Hochschule. Galvanotechnik : das Innovationsmagazin 1808–1812.","havard":"H. Borcherding, Ostwestfalen-Lippe: Elektronikprototypen von der Hochschule, Galvanotechnik : das Innovationsmagazin . (2015) 1808–1812.","mla":"Borcherding, Holger. “Ostwestfalen-Lippe: Elektronikprototypen von der Hochschule.” Galvanotechnik : das Innovationsmagazin , no. 09, Leuze, 2015, pp. 1808–12.","ufg":"Borcherding, Holger (2015): Ostwestfalen-Lippe: Elektronikprototypen von der Hochschule, in: Galvanotechnik : das Innovationsmagazin (09), S. 1808–1812.","ieee":"H. Borcherding, “Ostwestfalen-Lippe: Elektronikprototypen von der Hochschule,” Galvanotechnik : das Innovationsmagazin , no. 09, pp. 1808–1812, 2015.","ama":"Borcherding H. Ostwestfalen-Lippe: Elektronikprototypen von der Hochschule. Galvanotechnik : das Innovationsmagazin . 2015;(09):1808-1812."}},{"date_updated":"2023-03-15T13:49:51Z","user_id":"74004","type":"journal_article","date_created":"2020-12-10T13:25:47Z","publication":"MASCHINENMARKT","_id":"4250","language":[{"iso":"eng"}],"citation":{"ama":"Ehlich M, Borcherding H. Selbstoptimierende Fertigung wird Real. MASCHINENMARKT. 2015;(KW 15).","ieee":"M. Ehlich and H. Borcherding, “Selbstoptimierende Fertigung wird Real,” MASCHINENMARKT, no. KW 15, 2015.","van":"Ehlich M, Borcherding H. Selbstoptimierende Fertigung wird Real. MASCHINENMARKT. 2015;(KW 15).","havard":"M. Ehlich, H. Borcherding, Selbstoptimierende Fertigung wird Real, MASCHINENMARKT. (2015).","bjps":"Ehlich M and Borcherding H (2015) Selbstoptimierende Fertigung Wird Real. MASCHINENMARKT.","mla":"Ehlich, M., and Holger Borcherding. “Selbstoptimierende Fertigung Wird Real.” MASCHINENMARKT, no. KW 15, 2015.","ufg":"Ehlich, M./Borcherding, Holger (2015): Selbstoptimierende Fertigung wird Real, in: MASCHINENMARKT (KW 15).","apa":"Ehlich, M., & Borcherding, H. (2015). Selbstoptimierende Fertigung wird Real. MASCHINENMARKT, (KW 15).","chicago":"Ehlich, M., and Holger Borcherding. “Selbstoptimierende Fertigung Wird Real.” MASCHINENMARKT, no. KW 15 (2015).","short":"M. Ehlich, H. Borcherding, MASCHINENMARKT (2015).","chicago-de":"Ehlich, M. und Holger Borcherding. 2015. Selbstoptimierende Fertigung wird Real. MASCHINENMARKT, Nr. KW 15.","din1505-2-1":"Ehlich, M. ; Borcherding, Holger: Selbstoptimierende Fertigung wird Real. In: MASCHINENMARKT (2015), Nr. KW 15"},"title":"Selbstoptimierende Fertigung wird Real","status":"public","issue":"KW 15","department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"author":[{"full_name":"Ehlich, M.","first_name":"M.","last_name":"Ehlich"},{"id":"1693","first_name":"Holger","last_name":"Borcherding","full_name":"Borcherding, Holger"}],"year":2015},{"title":"Compact and Cost-efficient Power Regeneration System for Voltage Source Converters","publication_status":"published","citation":{"ama":"Austermann J, Cepin S, Borcherding H. Compact and Cost-efficient Power Regeneration System for Voltage Source Converters. In: Mesago PCIM GmbH, ed. PCIM Europe 2015 : High Voltage Module with Low Internal Inductance for next Chip Generation - next High Power Density Dual (NHPD2). Berlin: VDE-Verlag; 2015:1519-1526.","ieee":"J. Austermann, S. Cepin, and H. Borcherding, “Compact and Cost-efficient Power Regeneration System for Voltage Source Converters,” in PCIM Europe 2015 : High voltage module with low internal inductance for next chip generation - next High Power Density Dual (nHPD2), Nuremberg, 2015, pp. 1519–1526.","ufg":"Austermann, Johann et. al. (2015): Compact and Cost-efficient Power Regeneration System for Voltage Source Converters, in: Mesago PCIM GmbH (Hg.): PCIM Europe 2015 : High voltage module with low internal inductance for next chip generation - next High Power Density Dual (nHPD2), Berlin, S. 1519–1526.","bjps":"Austermann J, Cepin S and Borcherding H (2015) Compact and Cost-Efficient Power Regeneration System for Voltage Source Converters. In Mesago PCIM GmbH (ed.), PCIM Europe 2015 : High Voltage Module with Low Internal Inductance for next Chip Generation - next High Power Density Dual (NHPD2). Berlin: VDE-Verlag, pp. 1519–1526.","havard":"J. Austermann, S. Cepin, H. Borcherding, Compact and Cost-efficient Power Regeneration System for Voltage Source Converters, in: Mesago PCIM GmbH (Ed.), PCIM Europe 2015 : High Voltage Module with Low Internal Inductance for next Chip Generation - next High Power Density Dual (NHPD2), VDE-Verlag, Berlin, 2015: pp. 1519–1526.","mla":"Austermann, Johann, et al. “Compact and Cost-Efficient Power Regeneration System for Voltage Source Converters.” PCIM Europe 2015 : High Voltage Module with Low Internal Inductance for next Chip Generation - next High Power Density Dual (NHPD2), edited by Mesago PCIM GmbH, VDE-Verlag, 2015, pp. 1519–26.","van":"Austermann J, Cepin S, Borcherding H. Compact and Cost-efficient Power Regeneration System for Voltage Source Converters. In: Mesago PCIM GmbH, editor. PCIM Europe 2015 : High voltage module with low internal inductance for next chip generation - next High Power Density Dual (nHPD2). Berlin: VDE-Verlag; 2015. p. 1519–26.","chicago":"Austermann, Johann, Simon Cepin, and Holger Borcherding. “Compact and Cost-Efficient Power Regeneration System for Voltage Source Converters.” In PCIM Europe 2015 : High Voltage Module with Low Internal Inductance for next Chip Generation - next High Power Density Dual (NHPD2), edited by Mesago PCIM GmbH, 1519–26. Berlin: VDE-Verlag, 2015.","apa":"Austermann, J., Cepin, S., & Borcherding, H. (2015). Compact and Cost-efficient Power Regeneration System for Voltage Source Converters. In Mesago PCIM GmbH (Ed.), PCIM Europe 2015 : High voltage module with low internal inductance for next chip generation - next High Power Density Dual (nHPD2) (pp. 1519–1526). Berlin: VDE-Verlag.","chicago-de":"Austermann, Johann, Simon Cepin und Holger Borcherding. 2015. Compact and Cost-efficient Power Regeneration System for Voltage Source Converters. In: PCIM Europe 2015 : High voltage module with low internal inductance for next chip generation - next High Power Density Dual (nHPD2), hg. von Mesago PCIM GmbH, 1519–1526. Berlin: VDE-Verlag.","din1505-2-1":"Austermann, Johann ; Cepin, Simon ; Borcherding, Holger: Compact and Cost-efficient Power Regeneration System for Voltage Source Converters. In: Mesago PCIM GmbH (Hrsg.): PCIM Europe 2015 : High voltage module with low internal inductance for next chip generation - next High Power Density Dual (nHPD2). Berlin : VDE-Verlag, 2015, S. 1519–1526","short":"J. Austermann, S. Cepin, H. Borcherding, in: Mesago PCIM GmbH (Ed.), PCIM Europe 2015 : High Voltage Module with Low Internal Inductance for next Chip Generation - next High Power Density Dual (NHPD2), VDE-Verlag, Berlin, 2015, pp. 1519–1526."},"conference":{"start_date":"2015-05-19","end_date":"2015-05-21","location":"Nuremberg","name":"International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management Proceedings"},"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"year":2015,"author":[{"full_name":"Austermann, Johann","last_name":"Austermann","id":"42114","first_name":"Johann"},{"id":"52080","first_name":"Simon","full_name":"Cepin, Simon","last_name":"Cepin"},{"full_name":"Borcherding, Holger","first_name":"Holger","last_name":"Borcherding","id":"1693"}],"page":"1519 - 1526","status":"public","publisher":"VDE-Verlag","date_created":"2020-12-10T14:09:16Z","type":"conference","publication":"PCIM Europe 2015 : High voltage module with low internal inductance for next chip generation - next High Power Density Dual (nHPD2)","publication_identifier":{"isbn":["978-3-8007-3924-0"]},"date_updated":"2023-03-15T13:49:51Z","user_id":"74004","corporate_editor":["Mesago PCIM GmbH"],"language":[{"iso":"eng"}],"place":"Berlin","_id":"4262"},{"series_title":"[VDE-Artnr.: 221672]","title":"IEC TS 62578: 2015 ","publication_status":"published","citation":{"din1505-2-1":"Borcherding, Holger: IEC TS 62578: 2015 , [VDE-Artnr.: 221672]. 2.0. München : VDE-Verlag, 2015","chicago-de":"Borcherding, Holger. 2015. IEC TS 62578: 2015 . 2.0. [VDE-Artnr.: 221672]. München: VDE-Verlag.","short":"H. Borcherding, IEC TS 62578: 2015 , 2.0, VDE-Verlag, München, 2015.","chicago":"Borcherding, Holger. IEC TS 62578: 2015 . 2.0. [VDE-Artnr.: 221672]. München: VDE-Verlag, 2015.","ieee":"H. Borcherding, IEC TS 62578: 2015 , 2.0. München: VDE-Verlag, 2015.","apa":"Borcherding, H. (2015). IEC TS 62578: 2015 (2.0). München: VDE-Verlag.","havard":"H. Borcherding, IEC TS 62578: 2015 , 2.0, VDE-Verlag, München, 2015.","bjps":"Borcherding H (2015) IEC TS 62578: 2015 , 2.0. München: VDE-Verlag.","mla":"Borcherding, Holger. IEC TS 62578: 2015 . 2.0, VDE-Verlag, 2015.","ufg":"Borcherding, Holger (2015): IEC TS 62578: 2015 (=[VDE-Artnr.: 221672]), München, 2.0.","ama":"Borcherding H. IEC TS 62578: 2015 . 2.0. München: VDE-Verlag; 2015.","van":"Borcherding H. IEC TS 62578: 2015 . 2.0. München: VDE-Verlag; 2015. 240 p. ([VDE-Artnr.: 221672])."},"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"year":2015,"author":[{"first_name":"Holger","id":"1693","last_name":"Borcherding","full_name":"Borcherding, Holger"}],"abstract":[{"text":"IEC TS 62578:2015 describes the operation conditions and typical characteristics of active infeed converters (AIC) of all technologies and topologies which can be connected between the electrical power supply network (lines) a.c. side and a constant current or voltage type d.c. side and which can convert electrical power (active and reactive) in both directions (generative or regenerative). The following is excluded from the scope:\r\n- Requirements for the design, development or further functionality of active infeed applications.\r\n- Probability of interactions or influences of the AIC with other equipment caused by parasitic elements in an installation or caused by poor electronic design as well as their mitigations.\r\n- 'Overhead line' power supply networks because of lack of information (measurements) of their three phase impedances. This edition includes the following significant technical changes with respect to the previous edition:\r\na) IEC TS 62578, in its revised version includes observed values out of practical applications for emission values below 150 kHz.\r\nb) Therefore the document has been extended compared to the first edition, several detailed analysis results are given in the extended Annexes.\r\nc) Design recommendations have been derived from the international working group by an assessment of the power supply impedances between 2 kHz and 9 kHz, a comprehensive analysis of the withstand capability of power capacitors against harmonic currents injected by AIC, immunity tests of equipment and considerations about shifted resonances in the power supply network with increased population of undamped filter capacitors. ","lang":"eng"}],"page":"240","status":"public","publisher":"VDE-Verlag","date_created":"2020-12-14T12:19:39Z","type":"book","edition":"2.0","date_updated":"2023-03-15T13:49:51Z","user_id":"74004","alternative_title":["Power electronics systems and equipment - Operation conditions and characteristics of active infeed converter (AIC) applications including design recommendations for their emission values below 150 kHz"],"language":[{"iso":"eng"},{"iso":"fre"}],"place":"München","_id":"4283"},{"date_updated":"2023-03-15T13:49:52Z","user_id":"15514","date_created":"2021-01-08T12:03:42Z","type":"conference","publication":" 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA)","language":[{"iso":"eng"}],"keyword":["Maintenance engineering","Augmented reality","Context","Context modelin","Production facilities","Cameras"],"place":"New York","doi":"10.1109/ETFA.2015.7301586","_id":"4329","oa":"1","publication_status":"published","citation":{"ama":"Flatt H, Koch N, Guenter A, Röcker C, Jasperneite J. A Context-Aware Assistance System for Maintenance Applications in Smart Factories based on Augmented Reality and Indoor Localization. In: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA). New York: IEEE; 2015. doi:10.1109/ETFA.2015.7301586","van":"Flatt H, Koch N, Guenter A, Röcker C, Jasperneite J. A Context-Aware Assistance System for Maintenance Applications in Smart Factories based on Augmented Reality and Indoor Localization. In: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA). New York: IEEE; 2015.","mla":"Flatt, Holger, et al. “A Context-Aware Assistance System for Maintenance Applications in Smart Factories Based on Augmented Reality and Indoor Localization.” 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA), IEEE, 2015, doi:10.1109/ETFA.2015.7301586.","bjps":"Flatt H et al. (2015) A Context-Aware Assistance System for Maintenance Applications in Smart Factories Based on Augmented Reality and Indoor Localization. 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA). New York: IEEE.","havard":"H. Flatt, N. Koch, A. Guenter, C. Röcker, J. Jasperneite, A Context-Aware Assistance System for Maintenance Applications in Smart Factories based on Augmented Reality and Indoor Localization, in: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA), IEEE, New York, 2015.","ufg":"Flatt, Holger et. al. (2015): A Context-Aware Assistance System for Maintenance Applications in Smart Factories based on Augmented Reality and Indoor Localization, in: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA), New York.","ieee":"H. Flatt, N. Koch, A. Guenter, C. Röcker, and J. Jasperneite, “A Context-Aware Assistance System for Maintenance Applications in Smart Factories based on Augmented Reality and Indoor Localization,” in 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA), Luxembourg, Luxembourg, 2015.","apa":"Flatt, H., Koch, N., Guenter, A., Röcker, C., & Jasperneite, J. (2015). A Context-Aware Assistance System for Maintenance Applications in Smart Factories based on Augmented Reality and Indoor Localization. In 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA). New York: IEEE. https://doi.org/10.1109/ETFA.2015.7301586","chicago":"Flatt, Holger, Nils Koch, Andrei Guenter, Carsten Röcker, and Jürgen Jasperneite. “A Context-Aware Assistance System for Maintenance Applications in Smart Factories Based on Augmented Reality and Indoor Localization.” In 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA). New York: IEEE, 2015. https://doi.org/10.1109/ETFA.2015.7301586.","short":"H. Flatt, N. Koch, A. Guenter, C. Röcker, J. Jasperneite, in: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA), IEEE, New York, 2015.","din1505-2-1":"Flatt, Holger ; Koch, Nils ; Guenter, Andrei ; Röcker, Carsten ; Jasperneite, Jürgen: A Context-Aware Assistance System for Maintenance Applications in Smart Factories based on Augmented Reality and Indoor Localization. In: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA). New York : IEEE, 2015","chicago-de":"Flatt, Holger, Nils Koch, Andrei Guenter, Carsten Röcker und Jürgen Jasperneite. 2015. A Context-Aware Assistance System for Maintenance Applications in Smart Factories based on Augmented Reality and Indoor Localization. In: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA). New York: IEEE. doi:10.1109/ETFA.2015.7301586, ."},"title":"A Context-Aware Assistance System for Maintenance Applications in Smart Factories based on Augmented Reality and Indoor Localization","status":"public","publisher":"IEEE","conference":{"location":"Luxembourg, Luxembourg","name":"20th Conference on Emerging Technologies & Factory Automation (ETFA)","end_date":"2015-09-11","start_date":"2015-09-08"},"department":[{"_id":"DEP5023"}],"author":[{"last_name":"Flatt","first_name":"Holger","id":"58494","full_name":"Flatt, Holger"},{"full_name":"Koch, Nils","first_name":"Nils","last_name":"Koch"},{"full_name":"Guenter, Andrei","first_name":"Andrei","last_name":"Guenter"},{"first_name":"Carsten","full_name":"Röcker, Carsten","last_name":"Röcker","id":"61525"},{"id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"}],"year":2015,"main_file_link":[{"open_access":"1"}],"abstract":[{"text":"The term Industrie 4.0 carries the vision of smart factories, which automatically adapt to changes and assist the human as much as possible during operation and maintenance. This includes smart human machine interfaces, which reduce the chances of errors and help to make the right decisions. This paper presents an approach to equip the maintenance software running on a tablet PC with augmented reality functionality to be able to place virtual sticky notes at production modules. Additionally, these sticky notes are enriched with position information. The central element of this approach is an ontology-based context-aware framework, which aggregates and processes data from different sources. As a result, a tablet PC application was implemented, which allows displaying maintenance information as well as live plant process data in the form of augmented reality. More than 100 of those sticky notes can be placed using this system, whereas each note requires a file size of 12 to 16 kilo bytes. After placing a sticky note, the system recognizes it even if the camera's position is not exactly the same as during the placing process.","lang":"eng"}]},{"publisher":"Springer","abstract":[{"text":"Catchwords such as “Cyber-Physical-Systems” and “Industry 4.0” describe the current development of systems with embedded intelligence. These systems can be characterized by an increasing technical complexity that must be addressed in the user interface. In this paper we analyze the specific requirements posed by the interaction with cyber-physical-systems, present a coordinated approach to these requirements and illustrate our approach with a practical example of an assistance system for assembly workers in an industrial production environment.","lang":"eng"}],"conference":{"name":"4th International Conference, DUXU 2015, Held as Part of HCI International 2015","location":"Los Angeles, CA, USA","end_date":"2015-08-07","start_date":"2015-08-02"},"department":[{"_id":"DEP5023"}],"publication_status":"published","series_title":"Lecture Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web, and HCI","_id":"4330","doi":"10.1007/978-3-319-20886-2_8","place":"Cham","intvolume":" 9186","user_id":"83781","type":"conference","status":"public","page":"75-85 ","author":[{"first_name":"Volker","full_name":"Paelke, Volker","last_name":"Paelke"},{"first_name":"Carsten","last_name":"Röcker","full_name":"Röcker, Carsten","id":"61525"}],"year":"2015","citation":{"ieee":"V. Paelke and C. Röcker, “User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. ,” in Design, User Experience, and Usability: Design Discourse, Los Angeles, CA, USA, 2015, vol. 9186, pp. 75–85. doi: 10.1007/978-3-319-20886-2_8.","ama":"Paelke V, Röcker C. User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. . In: Design, User Experience, and Usability: Design Discourse. Vol 9186. Lecture Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web, and HCI. Springer; 2015:75-85. doi:10.1007/978-3-319-20886-2_8","apa":"Paelke, V., & Röcker, C. (2015). User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. . Design, User Experience, and Usability: Design Discourse, 9186, 75–85. https://doi.org/10.1007/978-3-319-20886-2_8","chicago":"Paelke, Volker, and Carsten Röcker. “User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. .” In Design, User Experience, and Usability: Design Discourse, 9186:75–85. Lecture Notes in Computer Science ; Information Systems and Applications, Incl. Internet/Web, and HCI. Cham: Springer, 2015. https://doi.org/10.1007/978-3-319-20886-2_8.","van":"Paelke V, Röcker C. User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. . In: Design, User Experience, and Usability: Design Discourse. Cham: Springer; 2015. p. 75–85. (Lecture Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web, and HCI; vol. 9186).","bjps":"Paelke V and Röcker C (2015) User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. . Design, User Experience, and Usability: Design Discourse, vol. 9186. Cham: Springer, pp. 75–85.","mla":"Paelke, Volker, and Carsten Röcker. “User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. .” Design, User Experience, and Usability: Design Discourse, vol. 9186, Springer, 2015, pp. 75–85, https://doi.org/10.1007/978-3-319-20886-2_8.","havard":"V. Paelke, C. Röcker, User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. , in: Design, User Experience, and Usability: Design Discourse, Springer, Cham, 2015: pp. 75–85.","ufg":"Paelke, Volker/Röcker, Carsten: User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. , in: o. Hg.: Design, User Experience, and Usability: Design Discourse, Bd. 9186, Cham 2015 (Lecture Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web, and HCI), S. 75–85.","short":"V. Paelke, C. Röcker, in: Design, User Experience, and Usability: Design Discourse, Springer, Cham, 2015, pp. 75–85.","din1505-2-1":"Paelke, Volker ; Röcker, Carsten: User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. . In: Design, User Experience, and Usability: Design Discourse, Lecture Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web, and HCI. Bd. 9186. Cham : Springer, 2015, S. 75–85","chicago-de":"Paelke, Volker und Carsten Röcker. 2015. User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. . In: Design, User Experience, and Usability: Design Discourse, 9186:75–85. Lecture Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web, and HCI. Cham: Springer. doi:10.1007/978-3-319-20886-2_8, ."},"volume":9186,"title":"User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. ","keyword":["Industrial IT","User-Centered design","Usability","User interfaces","Cyber-Physical-Systems","Industry 4.0","Augmented reality","Development processes and methods"],"language":[{"iso":"eng"}],"date_updated":"2025-04-11T09:03:04Z","publication":"Design, User Experience, and Usability: Design Discourse","publication_identifier":{"eisbn":["978-3-319-20886-2"],"isbn":["978-3-319-20885-5"]},"date_created":"2021-01-08T12:03:44Z"},{"user_id":"83781","intvolume":" 9190","type":"conference","place":"Cham","doi":"10.1007/978-3-319-20376-8_38","_id":"4331","publication_status":"published","series_title":"Lecture Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web, and HCI","publisher":"Springer","department":[{"_id":"DEP5023"}],"conference":{"end_date":"2015-08-07","start_date":"2015-08-02","location":"Los Angeles, CA, USA","name":"3. International Conference, HAS 2015, Held as Part of HCI International 2015"},"abstract":[{"lang":"eng","text":"When a user enters a personal identification number (PIN) into an automated teller machine or a point of sale terminal, there is a risk of some one watching from behind, trying to guess the PIN code. Such shoulder-surfing is a major security threat. In order to overcome this problem different PIN entry methods have been suggested. In this regard, gaze interaction methods are receiving attention in recent years, owing to the lowering cost of eye tracking technology. In this paper, we present SafetyPIN - an eye tracking based PIN entry system - which is aimed at making the PIN entry more secure with the help of an eye tracking device. We discuss the implementation and the initial evaluation of this system."}],"date_updated":"2025-04-11T09:03:48Z","editor":[{"last_name":"Tryfonas","first_name":"Theo","full_name":"Tryfonas, Theo"},{"first_name":"Ioannis","full_name":"Askoxylakis, Ioannis","last_name":"Askoxylakis"}],"date_created":"2021-01-08T12:03:45Z","publication_identifier":{"eisbn":["978-3-319-20376-8"],"isbn":["978-3-319-20375-1"]},"publication":"Human Aspects of Information Security, Privacy, and Trust","language":[{"iso":"eng"}],"keyword":["PIN entry","Eye tracking","Security","Usability","Point of sale terminals"],"volume":9190,"citation":{"chicago-de":"Seetharama, Mythreya, Volker Paelke und Carsten Röcker. 2015. SafetyPIN: Secure PIN Entry through Eye Tracking. In: Human Aspects of Information Security, Privacy, and Trust, hg. von Theo Tryfonas und Ioannis Askoxylakis, 9190:426–435. Lecture Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web, and HCI. Cham: Springer. doi:10.1007/978-3-319-20376-8_38, .","din1505-2-1":"Seetharama, Mythreya ; Paelke, Volker ; Röcker, Carsten: SafetyPIN: Secure PIN Entry through Eye Tracking. In: Tryfonas, T. ; Askoxylakis, I. (Hrsg.): Human Aspects of Information Security, Privacy, and Trust, Lecture Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web, and HCI. Bd. 9190. Cham : Springer, 2015, S. 426–435","short":"M. Seetharama, V. Paelke, C. Röcker, in: T. Tryfonas, I. Askoxylakis (Eds.), Human Aspects of Information Security, Privacy, and Trust, Springer, Cham, 2015, pp. 426–435.","chicago":"Seetharama, Mythreya, Volker Paelke, and Carsten Röcker. “SafetyPIN: Secure PIN Entry through Eye Tracking.” In Human Aspects of Information Security, Privacy, and Trust, edited by Theo Tryfonas and Ioannis Askoxylakis, 9190:426–35. Lecture Notes in Computer Science ; Information Systems and Applications, Incl. Internet/Web, and HCI. Cham: Springer, 2015. https://doi.org/10.1007/978-3-319-20376-8_38.","ieee":"M. Seetharama, V. Paelke, and C. Röcker, “SafetyPIN: Secure PIN Entry through Eye Tracking,” in Human Aspects of Information Security, Privacy, and Trust, Los Angeles, CA, USA, 2015, vol. 9190, pp. 426–435. doi: 10.1007/978-3-319-20376-8_38.","apa":"Seetharama, M., Paelke, V., & Röcker, C. (2015). SafetyPIN: Secure PIN Entry through Eye Tracking. In T. Tryfonas & I. Askoxylakis (Eds.), Human Aspects of Information Security, Privacy, and Trust (Vol. 9190, pp. 426–435). Springer. https://doi.org/10.1007/978-3-319-20376-8_38","mla":"Seetharama, Mythreya, et al. “SafetyPIN: Secure PIN Entry through Eye Tracking.” Human Aspects of Information Security, Privacy, and Trust, edited by Theo Tryfonas and Ioannis Askoxylakis, vol. 9190, Springer, 2015, pp. 426–35, https://doi.org/10.1007/978-3-319-20376-8_38.","havard":"M. Seetharama, V. Paelke, C. Röcker, SafetyPIN: Secure PIN Entry through Eye Tracking, in: T. Tryfonas, I. Askoxylakis (Eds.), Human Aspects of Information Security, Privacy, and Trust, Springer, Cham, 2015: pp. 426–435.","bjps":"Seetharama M, Paelke V and Röcker C (2015) SafetyPIN: Secure PIN Entry through Eye Tracking. In Tryfonas T and Askoxylakis I (eds), Human Aspects of Information Security, Privacy, and Trust, vol. 9190. Cham: Springer, pp. 426–435.","ufg":"Seetharama, Mythreya/Paelke, Volker/Röcker, Carsten: SafetyPIN: Secure PIN Entry through Eye Tracking, in: Tryfonas, Theo/Askoxylakis, Ioannis (Hgg.): Human Aspects of Information Security, Privacy, and Trust, Bd. 9190, Cham 2015 (Lecture Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web, and HCI), S. 426–435.","ama":"Seetharama M, Paelke V, Röcker C. SafetyPIN: Secure PIN Entry through Eye Tracking. In: Tryfonas T, Askoxylakis I, eds. Human Aspects of Information Security, Privacy, and Trust. Vol 9190. Lecture Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web, and HCI. Springer; 2015:426-435. doi:10.1007/978-3-319-20376-8_38","van":"Seetharama M, Paelke V, Röcker C. SafetyPIN: Secure PIN Entry through Eye Tracking. In: Tryfonas T, Askoxylakis I, editors. Human Aspects of Information Security, Privacy, and Trust. Cham: Springer; 2015. p. 426–35. (Lecture Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web, and HCI; vol. 9190)."},"title":"SafetyPIN: Secure PIN Entry through Eye Tracking","page":"426-435","status":"public","year":"2015","author":[{"last_name":"Seetharama","first_name":"Mythreya","full_name":"Seetharama, Mythreya"},{"first_name":"Volker","last_name":"Paelke","full_name":"Paelke, Volker"},{"id":"61525","full_name":"Röcker, Carsten","last_name":"Röcker","first_name":"Carsten"}]},{"conference":{"location":"Los Angeles, CA, USA","name":"2. International Conference, HCIB 2015, Held as Part of HCI International ","start_date":"2015--08-02","end_date":"2015-08-07"},"department":[{"_id":"DEP5023"}],"abstract":[{"text":"The core value proposition for most hospitality brands is to provide unique customer experiences; therefore we expect commercially viable opportunities for ambient intelligence systems in hospitality in general, and the high-end sector in particular. We believe that ambient intelligence systems paired with principles of Aesthetic Intelligence could facilitate such unique experiences and at the same time strengthen and differentiate the brands. This paper gives an overview of challenges in this field, reviews research and outlines future scenarios enhancing safety, economic optimisation and – especially - convenience for hotel guests.","lang":"eng"}],"publisher":"Springer","series_title":"Lecture Notes in Computer Science","publication_status":"published","place":"Cham","doi":"10.1007/978-3-319-20895-4_69","_id":"4332","type":"conference","user_id":"83781","intvolume":" 9191","author":[{"full_name":"Plewe, Daniela Alina","first_name":"Daniela Alina","last_name":"Plewe"},{"first_name":"Rui An","last_name":"Ong","full_name":"Ong, Rui An"},{"full_name":"Röcker, Carsten","id":"61525","first_name":"Carsten","last_name":"Röcker"}],"year":"2015","page":"739-747","status":"public","title":"Ambient and Aesthetic Intelligence For High-End Hospitality","citation":{"van":"Plewe DA, Ong RA, Röcker C. Ambient and Aesthetic Intelligence For High-End Hospitality. In: Fui-Hoon Nah F, Tan CH, editors. HCI in Business . Cham: Springer; 2015. p. 739–47. (Lecture Notes in Computer Science; vol. 9191).","mla":"Plewe, Daniela Alina, et al. “Ambient and Aesthetic Intelligence For High-End Hospitality.” HCI in Business , edited by Fiona Fui-Hoon Nah and Chuan-Hoo Tan, vol. 9191, Springer, 2015, pp. 739–47, https://doi.org/10.1007/978-3-319-20895-4_69.","bjps":"Plewe DA, Ong RA and Röcker C (2015) Ambient and Aesthetic Intelligence For High-End Hospitality. In Fui-Hoon Nah F and Tan C-H (eds), HCI in Business , vol. 9191. Cham: Springer, pp. 739–747.","havard":"D.A. Plewe, R.A. Ong, C. Röcker, Ambient and Aesthetic Intelligence For High-End Hospitality, in: F. Fui-Hoon Nah, C.-H. Tan (Eds.), HCI in Business , Springer, Cham, 2015: pp. 739–747.","ufg":"Plewe, Daniela Alina/Ong, Rui An/Röcker, Carsten: Ambient and Aesthetic Intelligence For High-End Hospitality, in: Fui-Hoon Nah, Fiona/Tan, Chuan-Hoo (Hgg.): HCI in Business , Bd. 9191, Cham 2015 (Lecture Notes in Computer Science), S. 739–747.","apa":"Plewe, D. A., Ong, R. A., & Röcker, C. (2015). Ambient and Aesthetic Intelligence For High-End Hospitality. In F. Fui-Hoon Nah & C.-H. Tan (Eds.), HCI in Business (Vol. 9191, pp. 739–747). Springer. https://doi.org/10.1007/978-3-319-20895-4_69","chicago":"Plewe, Daniela Alina, Rui An Ong, and Carsten Röcker. “Ambient and Aesthetic Intelligence For High-End Hospitality.” In HCI in Business , edited by Fiona Fui-Hoon Nah and Chuan-Hoo Tan, 9191:739–47. Lecture Notes in Computer Science. Cham: Springer, 2015. https://doi.org/10.1007/978-3-319-20895-4_69.","short":"D.A. Plewe, R.A. Ong, C. Röcker, in: F. Fui-Hoon Nah, C.-H. Tan (Eds.), HCI in Business , Springer, Cham, 2015, pp. 739–747.","din1505-2-1":"Plewe, Daniela Alina ; Ong, Rui An ; Röcker, Carsten: Ambient and Aesthetic Intelligence For High-End Hospitality. In: Fui-Hoon Nah, F. ; Tan, C.-H. (Hrsg.): HCI in Business , Lecture Notes in Computer Science. Bd. 9191. Cham : Springer, 2015, S. 739–747","chicago-de":"Plewe, Daniela Alina, Rui An Ong und Carsten Röcker. 2015. Ambient and Aesthetic Intelligence For High-End Hospitality. In: HCI in Business , hg. von Fiona Fui-Hoon Nah und Chuan-Hoo Tan, 9191:739–747. Lecture Notes in Computer Science. Cham: Springer. doi:10.1007/978-3-319-20895-4_69, .","ama":"Plewe DA, Ong RA, Röcker C. Ambient and Aesthetic Intelligence For High-End Hospitality. In: Fui-Hoon Nah F, Tan CH, eds. HCI in Business . Vol 9191. Lecture Notes in Computer Science. Springer; 2015:739-747. doi:10.1007/978-3-319-20895-4_69","ieee":"D. A. Plewe, R. A. Ong, and C. Röcker, “Ambient and Aesthetic Intelligence For High-End Hospitality,” in HCI in Business , Los Angeles, CA, USA, 2015, vol. 9191, pp. 739–747. doi: 10.1007/978-3-319-20895-4_69."},"volume":9191,"language":[{"iso":"eng"}],"keyword":["Smart hospitality","Business applications for home/leisure","Technology and branding","Smart environments","Personalized services","Aesthetic intelligence","Ambient intelligence"],"date_created":"2021-01-08T12:03:46Z","publication":"HCI in Business ","publication_identifier":{"isbn":["978-3-319-20894-7"],"eisbn":["978-3-319-20895-4"]},"date_updated":"2025-04-11T09:04:09Z","editor":[{"last_name":"Fui-Hoon Nah","full_name":"Fui-Hoon Nah, Fiona ","first_name":"Fiona "},{"last_name":"Tan","full_name":"Tan, Chuan-Hoo","first_name":"Chuan-Hoo"}]},{"title":"The Ambience of Ambient Intelligence: Will Cultural, Social and Environmental Differences Lead to Localised Ambient Systems? ","citation":{"ama":"Kaiying CL, Plewe DA, Röcker C. The Ambience of Ambient Intelligence: Will Cultural, Social and Environmental Differences Lead to Localised Ambient Systems? . In: Ahram T, Karwowski W, Schmorrow D, eds. 6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015) and the Affiliated Conferences, AHFE 2015. Vol 3. Procedia Manufacturing. Amsterdam [u.a.]: Elsevier; 2015:2155-2161. doi:10.1016/j.promfg.2015.07.355","ieee":"C. L. Kaiying, D. A. Plewe, and C. Röcker, “The Ambience of Ambient Intelligence: Will Cultural, Social and Environmental Differences Lead to Localised Ambient Systems? ,” in 6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015) and the Affiliated Conferences, AHFE 2015, Las Vegas, USA, 2015, vol. 3, pp. 2155–2161.","ufg":"Kaiying, Cindy Lin et. al. (2015): The Ambience of Ambient Intelligence: Will Cultural, Social and Environmental Differences Lead to Localised Ambient Systems? , in: Tareq Ahram et. al. (Hgg.): 6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015) and the Affiliated Conferences, AHFE 2015 (=Procedia Manufacturing 3), Amsterdam [u.a.], S. 2155–2161.","mla":"Kaiying, Cindy Lin, et al. “The Ambience of Ambient Intelligence: Will Cultural, Social and Environmental Differences Lead to Localised Ambient Systems? .” 6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015) and the Affiliated Conferences, AHFE 2015, edited by Tareq Ahram et al., vol. 3, Elsevier, 2015, pp. 2155–61, doi:10.1016/j.promfg.2015.07.355.","bjps":"Kaiying CL, Plewe DA and Röcker C (2015) The Ambience of Ambient Intelligence: Will Cultural, Social and Environmental Differences Lead to Localised Ambient Systems? . In Ahram T, Karwowski W and Schmorrow D (eds), 6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015) and the Affiliated Conferences, AHFE 2015, vol. 3. Amsterdam [u.a.]: Elsevier, pp. 2155–2161.","havard":"C.L. Kaiying, D.A. Plewe, C. Röcker, The Ambience of Ambient Intelligence: Will Cultural, Social and Environmental Differences Lead to Localised Ambient Systems? , in: T. Ahram, W. Karwowski, D. Schmorrow (Eds.), 6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015) and the Affiliated Conferences, AHFE 2015, Elsevier, Amsterdam [u.a.], 2015: pp. 2155–2161.","van":"Kaiying CL, Plewe DA, Röcker C. The Ambience of Ambient Intelligence: Will Cultural, Social and Environmental Differences Lead to Localised Ambient Systems? . In: Ahram T, Karwowski W, Schmorrow D, editors. 6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015) and the Affiliated Conferences, AHFE 2015. Amsterdam [u.a.]: Elsevier; 2015. p. 2155–61. (Procedia Manufacturing; vol. 3).","chicago":"Kaiying, Cindy Lin, Daniela Alina Plewe, and Carsten Röcker. “The Ambience of Ambient Intelligence: Will Cultural, Social and Environmental Differences Lead to Localised Ambient Systems? .” In 6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015) and the Affiliated Conferences, AHFE 2015, edited by Tareq Ahram, Waldemar Karwowski, and Dylan Schmorrow, 3:2155–61. Procedia Manufacturing. Amsterdam [u.a.]: Elsevier, 2015. https://doi.org/10.1016/j.promfg.2015.07.355.","apa":"Kaiying, C. L., Plewe, D. A., & Röcker, C. (2015). The Ambience of Ambient Intelligence: Will Cultural, Social and Environmental Differences Lead to Localised Ambient Systems? . In T. Ahram, W. Karwowski, & D. Schmorrow (Eds.), 6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015) and the Affiliated Conferences, AHFE 2015 (Vol. 3, pp. 2155–2161). Amsterdam [u.a.]: Elsevier. https://doi.org/10.1016/j.promfg.2015.07.355","din1505-2-1":"Kaiying, Cindy Lin ; Plewe, Daniela Alina ; Röcker, Carsten: The Ambience of Ambient Intelligence: Will Cultural, Social and Environmental Differences Lead to Localised Ambient Systems? . In: Ahram, T. ; Karwowski, W. ; Schmorrow, D. (Hrsg.): 6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015) and the Affiliated Conferences, AHFE 2015, Procedia Manufacturing. Bd. 3. Amsterdam [u.a.] : Elsevier, 2015, S. 2155–2161","chicago-de":"Kaiying, Cindy Lin, Daniela Alina Plewe und Carsten Röcker. 2015. The Ambience of Ambient Intelligence: Will Cultural, Social and Environmental Differences Lead to Localised Ambient Systems? . In: 6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015) and the Affiliated Conferences, AHFE 2015, hg. von Tareq Ahram, Waldemar Karwowski, und Dylan Schmorrow, 3:2155–2161. Procedia Manufacturing. Amsterdam [u.a.]: Elsevier. doi:10.1016/j.promfg.2015.07.355, .","short":"C.L. Kaiying, D.A. Plewe, C. Röcker, in: T. Ahram, W. Karwowski, D. Schmorrow (Eds.), 6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015) and the Affiliated Conferences, AHFE 2015, Elsevier, Amsterdam [u.a.], 2015, pp. 2155–2161."},"volume":3,"year":2015,"main_file_link":[{"open_access":"1"}],"author":[{"full_name":"Kaiying, Cindy Lin","first_name":"Cindy Lin","last_name":"Kaiying"},{"first_name":"Daniela Alina","last_name":"Plewe","full_name":"Plewe, Daniela Alina"},{"first_name":"Carsten","full_name":"Röcker, Carsten","last_name":"Röcker","id":"61525"}],"status":"public","page":"2155-2161","publication":"6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015) and the Affiliated Conferences, AHFE 2015","publication_identifier":{"eisbn":["2351-9789"]},"date_created":"2021-01-08T12:03:48Z","date_updated":"2023-03-15T13:49:52Z","editor":[{"last_name":"Ahram","full_name":"Ahram, Tareq","first_name":"Tareq"},{"full_name":"Karwowski, Waldemar","first_name":"Waldemar","last_name":"Karwowski"},{"last_name":"Schmorrow","full_name":"Schmorrow, Dylan","first_name":"Dylan"}],"oa":"1","keyword":["Aesthetic intelligence","Ambient intelligence","Smart home","Assurance","China"],"language":[{"iso":"eng"}],"series_title":"Procedia Manufacturing","publication_status":"published","conference":{"name":"6th International Conference on Applied Human Factors and Ergonomics (AHFE) 2015","location":"Las Vegas, USA","end_date":"2015-07-30","start_date":"2015-07-26"},"department":[{"_id":"DEP5023"}],"abstract":[{"text":"Most research in the field of ambient technology has been conducted in Western cultural spheres. In this paper, we want to explore potential approaches designers might take towards ambient systems in Asian contexts. We particularly aim at exploring the role of “ambience” in the development of such systems and analyzing how aesthetic factors vary depending on culture. We observed that efficiency and environmental factors influence design decisions and serve as feedback on smart technologies.","lang":"eng"}],"publisher":"Elsevier","type":"conference","user_id":"15514","intvolume":" 3","place":"Amsterdam [u.a.]","_id":"4333","doi":"10.1016/j.promfg.2015.07.355"},{"oa":"1","language":[{"iso":"eng"}],"keyword":["Ambient intelligence","Aesthetic intelligence","Hedonic design","Transportation","User-centered design : Gamification"],"date_created":"2021-01-08T12:03:49Z","publication_identifier":{"issn":["2351-9789"]},"publication":"Proceedings of the International Conference on Applied Human Factors and Ergonomics 2015 ","date_updated":"2023-03-15T13:49:52Z","author":[{"last_name":"Rui","full_name":"Rui, Ang Sheng","first_name":"Ang Sheng"},{"first_name":"Daniela Alina","full_name":"Plewe, Daniela Alina","last_name":"Plewe"},{"first_name":"Carsten","full_name":"Röcker, Carsten","last_name":"Röcker","id":"61525"}],"year":2015,"main_file_link":[{"open_access":"1"}],"page":"2103-2109","status":"public","title":"Themed Passenger Cabins in Rapid Transit Systems: Promoting Commuters’ Happiness through Ambient and Aesthetic Intelligence","citation":{"chicago":"Rui, Ang Sheng, Daniela Alina Plewe, and Carsten Röcker. “Themed Passenger Cabins in Rapid Transit Systems: Promoting Commuters’ Happiness through Ambient and Aesthetic Intelligence.” In Proceedings of the International Conference on Applied Human Factors and Ergonomics 2015 , 3:2103–9. Procedia Manufacturing. Las Vegas, USA: Elsevier, 2015. https://doi.org/10.1016/j.promfg.2015.07.348.","apa":"Rui, A. S., Plewe, D. A., & Röcker, C. (2015). Themed Passenger Cabins in Rapid Transit Systems: Promoting Commuters’ Happiness through Ambient and Aesthetic Intelligence. In Proceedings of the International Conference on Applied Human Factors and Ergonomics 2015 (Vol. 3, pp. 2103–2109). Las Vegas, USA: Elsevier. https://doi.org/10.1016/j.promfg.2015.07.348","havard":"A.S. Rui, D.A. Plewe, C. Röcker, Themed Passenger Cabins in Rapid Transit Systems: Promoting Commuters’ Happiness through Ambient and Aesthetic Intelligence, in: Proceedings of the International Conference on Applied Human Factors and Ergonomics 2015 , Elsevier, Las Vegas, USA, 2015: pp. 2103–2109.","bjps":"Rui AS, Plewe DA and Röcker C (2015) Themed Passenger Cabins in Rapid Transit Systems: Promoting Commuters’ Happiness through Ambient and Aesthetic Intelligence. Proceedings of the International Conference on Applied Human Factors and Ergonomics 2015 , vol. 3. Las Vegas, USA: Elsevier, pp. 2103–2109.","mla":"Rui, Ang Sheng, et al. “Themed Passenger Cabins in Rapid Transit Systems: Promoting Commuters’ Happiness through Ambient and Aesthetic Intelligence.” Proceedings of the International Conference on Applied Human Factors and Ergonomics 2015 , vol. 3, Elsevier, 2015, pp. 2103–09, doi:10.1016/j.promfg.2015.07.348.","ufg":"Rui, Ang Sheng et. al. (2015): Themed Passenger Cabins in Rapid Transit Systems: Promoting Commuters’ Happiness through Ambient and Aesthetic Intelligence, in: Proceedings of the International Conference on Applied Human Factors and Ergonomics 2015 (=Procedia Manufacturing 3), Las Vegas, USA, S. 2103–2109.","van":"Rui AS, Plewe DA, Röcker C. Themed Passenger Cabins in Rapid Transit Systems: Promoting Commuters’ Happiness through Ambient and Aesthetic Intelligence. In: Proceedings of the International Conference on Applied Human Factors and Ergonomics 2015 . Las Vegas, USA: Elsevier; 2015. p. 2103–9. (Procedia Manufacturing; vol. 3).","din1505-2-1":"Rui, Ang Sheng ; Plewe, Daniela Alina ; Röcker, Carsten: Themed Passenger Cabins in Rapid Transit Systems: Promoting Commuters’ Happiness through Ambient and Aesthetic Intelligence. In: Proceedings of the International Conference on Applied Human Factors and Ergonomics 2015 , Procedia Manufacturing. Bd. 3. Las Vegas, USA : Elsevier, 2015, S. 2103–2109","chicago-de":"Rui, Ang Sheng, Daniela Alina Plewe und Carsten Röcker. 2015. Themed Passenger Cabins in Rapid Transit Systems: Promoting Commuters’ Happiness through Ambient and Aesthetic Intelligence. In: Proceedings of the International Conference on Applied Human Factors and Ergonomics 2015 , 3:2103–2109. Procedia Manufacturing. Las Vegas, USA: Elsevier. doi:10.1016/j.promfg.2015.07.348, .","short":"A.S. Rui, D.A. Plewe, C. Röcker, in: Proceedings of the International Conference on Applied Human Factors and Ergonomics 2015 , Elsevier, Las Vegas, USA, 2015, pp. 2103–2109.","ieee":"A. S. Rui, D. A. Plewe, and C. Röcker, “Themed Passenger Cabins in Rapid Transit Systems: Promoting Commuters’ Happiness through Ambient and Aesthetic Intelligence,” in Proceedings of the International Conference on Applied Human Factors and Ergonomics 2015 , Las Vegas, Nevada, USA, 2015, vol. 3, pp. 2103–2109.","ama":"Rui AS, Plewe DA, Röcker C. Themed Passenger Cabins in Rapid Transit Systems: Promoting Commuters’ Happiness through Ambient and Aesthetic Intelligence. In: Proceedings of the International Conference on Applied Human Factors and Ergonomics 2015 . Vol 3. Procedia Manufacturing. Las Vegas, USA: Elsevier; 2015:2103-2109. doi:10.1016/j.promfg.2015.07.348"},"volume":3,"place":"Las Vegas, USA","doi":"10.1016/j.promfg.2015.07.348","_id":"4334","type":"conference","user_id":"15514","intvolume":" 3","department":[{"_id":"DEP5023"}],"conference":{"name":"6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015) and the Affiliated Conferences, AHFE 2015","location":"Las Vegas, Nevada, USA","start_date":"2015-07-26","end_date":"2015-0730"},"abstract":[{"text":"This paper presents several conceptual approaches for improving user engagement and happiness in mass transport systems by effectively integrating principles of ambient and aesthetic intelligence. We introduce themed passenger carriages as constructed spaces with an overarching topic or narrative, designed to make commuting a meaningful and immersive experience. We examine the challenges for commuters and the existing solutions. Following which, we develop scenarios related to the fields of recreation, culture, education, business and entertainment. With an increasing interest of policy-makers in the concept of happiness as a socioeconomic measure for national wellbeing, we identify generic approaches for future research.","lang":"eng"}],"publisher":"Elsevier","series_title":"Procedia Manufacturing","publication_status":"published"},{"publication_identifier":{"eissn":["1611-3349"],"isbn":["978-3-319-16225-6"],"issn":["0302-9743"],"eisbn":["978-3-319-16226-3"]},"date_created":"2021-01-08T12:03:52Z","type":"book_editor","user_id":"15514","date_updated":"2023-03-15T13:49:52Z","intvolume":" 8700","editor":[{"full_name":"Holzinger, Andreas","first_name":"Andreas","last_name":"Holzinger"},{"last_name":"Röcker","id":"61525","full_name":"Röcker, Carsten","first_name":"Carsten"},{"first_name":"Martina","full_name":"Ziefle, Martina","last_name":"Ziefle"}],"oa":"1","place":"Heidelberg","keyword":["HCI","ambient assisted living","big data","computational intelligence","context awareness","data centric medicine","decision support","interactive data mining","keyword detection","knoweldge bases","knoweldge discovery","machine learning","medical decision support","medical informatics","natural language processing","pervasive health","smart home","ubiquitous computing","visualization","wearable sensors"],"language":[{"iso":"eng"}],"_id":"4336","doi":"10.1007/978-3-319-16226-3","series_title":"Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI","title":"Smart Health: Open Problems and Future Challenges","citation":{"chicago-de":"Holzinger, Andreas, Carsten Röcker und Martina Ziefle, Hrsg. 2015. Smart Health: Open Problems and Future Challenges. Bd. 8700. Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI. Heidelberg: Springer. doi:10.1007/978-3-319-16226-3, .","din1505-2-1":"Holzinger, A. ; Röcker, C. ; Ziefle, M. (Hrsg.): Smart Health: Open Problems and Future Challenges, Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI. Bd. 8700. Heidelberg : Springer, 2015","short":"A. Holzinger, C. Röcker, M. Ziefle, eds., Smart Health: Open Problems and Future Challenges, Springer, Heidelberg, 2015.","chicago":"Holzinger, Andreas, Carsten Röcker, and Martina Ziefle, eds. Smart Health: Open Problems and Future Challenges. Vol. 8700. Lecture Notes in Computer Science / Information Systems and Applications, Incl. Internet/Web, and HCI. Heidelberg: Springer, 2015. https://doi.org/10.1007/978-3-319-16226-3.","apa":"Holzinger, A., Röcker, C., & Ziefle, M. (Eds.). (2015). Smart Health: Open Problems and Future Challenges (Vol. 8700). Heidelberg: Springer. https://doi.org/10.1007/978-3-319-16226-3","havard":"A. Holzinger, C. Röcker, M. Ziefle, eds., Smart Health: Open Problems and Future Challenges, Springer, Heidelberg, 2015.","mla":"Holzinger, Andreas, et al., editors. Smart Health: Open Problems and Future Challenges. Vol. 8700, Springer, 2015, doi:10.1007/978-3-319-16226-3.","bjps":"Holzinger A, Röcker C and Ziefle M (eds) (2015) Smart Health: Open Problems and Future Challenges. Heidelberg: Springer.","ufg":"Holzinger, Andreas et. al. (Hgg.) (2015): Smart Health: Open Problems and Future Challenges (=Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI 8700), Heidelberg.","van":"Holzinger A, Röcker C, Ziefle M, editors. Smart Health: Open Problems and Future Challenges. Heidelberg: Springer; 2015. 275 p. (Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI; vol. 8700).","ieee":"A. Holzinger, C. Röcker, and M. Ziefle, Eds., Smart Health: Open Problems and Future Challenges, vol. 8700. Heidelberg: Springer, 2015.","ama":"Holzinger A, Röcker C, Ziefle M, eds. Smart Health: Open Problems and Future Challenges. Vol 8700. Heidelberg: Springer; 2015. doi:10.1007/978-3-319-16226-3"},"volume":8700,"publication_status":"published","main_file_link":[{"open_access":"1","url":"http://www.springerlink.com/content/978-3-319-16226-3 "}],"year":2015,"department":[{"_id":"DEP5023"}],"abstract":[{"text":"Prolonged life expectancy along with the increasing complexity of medicine and health services raises health costs worldwide dramatically. Whilst the smart health concept has much potential to support the concept of the emerging P4-medicine (preventive, participatory, predictive, and personalized), such high-tech medicine produces large amounts of high-dimensional, weakly-structured data sets and massive amounts of unstructured information. All these technological approaches along with “big data” are turning the medical sciences into a data-intensive science. To keep pace with the growing amounts of complex data, smart hospital approaches are a commandment of the future, necessitating context aware computing along with advanced interaction paradigms in new physical-digital ecosystems.\r\n\r\nThe very successful synergistic combination of methodologies and approaches from Human-Computer Interaction (HCI) and Knowledge Discovery and Data Mining (KDD) offers ideal conditions for the vision to support human intelligence with machine learning.\r\n\r\nThe papers selected for this volume focus on hot topics in smart health; they discuss open problems and future challenges in order to provide a research agenda to stimulate further research and progress.","lang":"eng"}],"status":"public","page":"275","publisher":"Springer"},{"abstract":[{"lang":"eng","text":"Our goal is to develop a system for coaching human motions (e.g., for rehabilitation and daily health maintenance). This paper focuses on how to coach a user so that his/her motion gets closer to the good template of a target motion. It is important to efficiently advise the user to emulate the crucial features that define the good template. The proposed system (1) automatically mines the crucial features of any kind of motion from a set of motion features and (2) gives the user feedback about how to modify the motion through an intuitive interface. The crucial features are mined by feature sparsification through binary classification between the samples of good and other motions. An interface for motion coaching is designed to give feedback via different channels (e.g., visually, aurally), depending on the type of error. To use the total system, all the user must do is just move and then get feedback on the motion. Following experimental results, open problems for future work are discussed."}],"department":[{"_id":"DEP5023"}],"publisher":"Springer","series_title":"Lecture Notes in Computer Science","publication_status":"published","doi":"10.1007/978-3-319-16226-3_8","_id":"4337","place":"Heidelberg","type":"book_chapter","intvolume":" 8700","user_id":"15514","author":[{"last_name":"Ukita","full_name":"Ukita, Norimichi","first_name":"Norimichi"},{"last_name":"Kaulen","first_name":"Daniel ","full_name":"Kaulen, Daniel "},{"id":"61525","first_name":"Carsten","full_name":"Röcker, Carsten","last_name":"Röcker"}],"main_file_link":[{"open_access":"1"}],"year":2015,"page":" 189 - 208","status":"public","title":"A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health","volume":8700,"citation":{"apa":"Ukita, N., Kaulen, D., & Röcker, C. (2015). A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health. In A. Holzinger, C. Röcker, & M. Ziefle (Eds.), Smart Health : Open Problems and Future Challenges (Vol. 8700, pp. 189–208). Heidelberg: Springer. https://doi.org/10.1007/978-3-319-16226-3_8","ieee":"N. Ukita, D. Kaulen, and C. Röcker, “A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health,” in Smart Health : Open Problems and Future Challenges, vol. 8700, A. Holzinger, C. Röcker, and M. Ziefle, Eds. Heidelberg: Springer, 2015, pp. 189–208.","chicago":"Ukita, Norimichi, Daniel Kaulen, and Carsten Röcker. “A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health.” In Smart Health : Open Problems and Future Challenges, edited by Andreas Holzinger, Carsten Röcker, and Martina Ziefle, 8700:189–208. Lecture Notes in Computer Science. Heidelberg: Springer, 2015. https://doi.org/10.1007/978-3-319-16226-3_8.","van":"Ukita N, Kaulen D, Röcker C. A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health. In: Holzinger A, Röcker C, Ziefle M, editors. Smart Health : Open Problems and Future Challenges. Heidelberg: Springer; 2015. p. 189–208. (Lecture Notes in Computer Science; vol. 8700).","ama":"Ukita N, Kaulen D, Röcker C. A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health. In: Holzinger A, Röcker C, Ziefle M, eds. Smart Health : Open Problems and Future Challenges. Vol 8700. Lecture Notes in Computer Science. Heidelberg: Springer; 2015:189-208. doi:10.1007/978-3-319-16226-3_8","ufg":"Ukita, Norimichi et. al. (2015): A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health, in: Andreas Holzinger et. al. (Hgg.): Smart Health : Open Problems and Future Challenges (=Lecture Notes in Computer Science 8700), Heidelberg, S. 189–208.","bjps":"Ukita N, Kaulen D and Röcker C (2015) A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health. In Holzinger A, Röcker C and Ziefle M (eds), Smart Health : Open Problems and Future Challenges, vol. 8700. Heidelberg: Springer, pp. 189–208.","havard":"N. Ukita, D. Kaulen, C. Röcker, A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health, in: A. Holzinger, C. Röcker, M. Ziefle (Eds.), Smart Health : Open Problems and Future Challenges, Springer, Heidelberg, 2015: pp. 189–208.","mla":"Ukita, Norimichi, et al. “A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health.” Smart Health : Open Problems and Future Challenges, edited by Andreas Holzinger et al., vol. 8700, Springer, 2015, pp. 189–208, doi:10.1007/978-3-319-16226-3_8.","short":"N. Ukita, D. Kaulen, C. Röcker, in: A. Holzinger, C. Röcker, M. Ziefle (Eds.), Smart Health : Open Problems and Future Challenges, Springer, Heidelberg, 2015, pp. 189–208.","chicago-de":"Ukita, Norimichi, Daniel Kaulen und Carsten Röcker. 2015. A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health. In: Smart Health : Open Problems and Future Challenges, hg. von Andreas Holzinger, Carsten Röcker, und Martina Ziefle, 8700:189–208. Lecture Notes in Computer Science. Heidelberg: Springer. doi:10.1007/978-3-319-16226-3_8, .","din1505-2-1":"Ukita, Norimichi ; Kaulen, Daniel ; Röcker, Carsten: A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health. In: Holzinger, A. ; Röcker, C. ; Ziefle, M. (Hrsg.): Smart Health : Open Problems and Future Challenges, Lecture Notes in Computer Science. Bd. 8700. Heidelberg : Springer, 2015, S. 189–208"},"oa":"1","language":[{"iso":"eng"}],"keyword":["Motion coaching","Error feedback","Physical rehabilitation"],"date_created":"2021-01-08T12:03:53Z","publication":"Smart Health : Open Problems and Future Challenges","publication_identifier":{"isbn":["978-3-319-16225-6"],"eisbn":["978-3-319-16226-3"]},"editor":[{"full_name":"Holzinger, Andreas","first_name":"Andreas","last_name":"Holzinger"},{"id":"61525","full_name":"Röcker, Carsten","last_name":"Röcker","first_name":"Carsten"},{"first_name":"Martina","last_name":"Ziefle","full_name":"Ziefle, Martina"}],"date_updated":"2023-03-15T13:49:52Z"},{"page":"1 - 20","status":"public","author":[{"full_name":"Holzinger, Andreas","first_name":"Andreas","last_name":"Holzinger"},{"last_name":"Röcker","id":"61525","full_name":"Röcker, Carsten","first_name":"Carsten"},{"full_name":"Ziefle, Martina","last_name":"Ziefle","first_name":"Martina"}],"year":2015,"main_file_link":[{"open_access":"1"}],"citation":{"apa":"Holzinger, A., Röcker, C., & Ziefle, M. (2015). From Smart Health to Smart Hospitals. In A. Holzinger, C. Röcker, & M. Ziefle (Eds.), Smart Health : Open Problems and Future Challenges (Vol. 8700, pp. 1–20). Heidelberg: Springer. https://doi.org/10.1007/978-3-319-16226-3_1","chicago":"Holzinger, Andreas, Carsten Röcker, and Martina Ziefle. “From Smart Health to Smart Hospitals.” In Smart Health : Open Problems and Future Challenges, edited by Andreas Holzinger, Carsten Röcker, and Martina Ziefle, 8700:1–20. Lecture Notes in Computer Science. Heidelberg: Springer, 2015. https://doi.org/10.1007/978-3-319-16226-3_1.","van":"Holzinger A, Röcker C, Ziefle M. From Smart Health to Smart Hospitals. In: Holzinger A, Röcker C, Ziefle M, editors. Smart Health : Open Problems and Future Challenges. Heidelberg: Springer; 2015. p. 1–20. (Lecture Notes in Computer Science; vol. 8700).","ufg":"Holzinger, Andreas et. al. (2015): From Smart Health to Smart Hospitals, in: Andreas Holzinger et. al. (Hgg.): Smart Health : Open Problems and Future Challenges (=Lecture Notes in Computer Science 8700), Heidelberg, S. 1–20.","havard":"A. Holzinger, C. Röcker, M. Ziefle, From Smart Health to Smart Hospitals, in: A. Holzinger, C. Röcker, M. Ziefle (Eds.), Smart Health : Open Problems and Future Challenges, Springer, Heidelberg, 2015: pp. 1–20.","bjps":"Holzinger A, Röcker C and Ziefle M (2015) From Smart Health to Smart Hospitals. In Holzinger A, Röcker C and Ziefle M (eds), Smart Health : Open Problems and Future Challenges, vol. 8700. Heidelberg: Springer, pp. 1–20.","mla":"Holzinger, Andreas, et al. “From Smart Health to Smart Hospitals.” Smart Health : Open Problems and Future Challenges, edited by Andreas Holzinger et al., vol. 8700, Springer, 2015, pp. 1–20, doi:10.1007/978-3-319-16226-3_1.","short":"A. Holzinger, C. Röcker, M. Ziefle, in: A. Holzinger, C. Röcker, M. Ziefle (Eds.), Smart Health : Open Problems and Future Challenges, Springer, Heidelberg, 2015, pp. 1–20.","chicago-de":"Holzinger, Andreas, Carsten Röcker und Martina Ziefle. 2015. From Smart Health to Smart Hospitals. In: Smart Health : Open Problems and Future Challenges, hg. von Andreas Holzinger, Carsten Röcker, und Martina Ziefle, 8700:1–20. Lecture Notes in Computer Science. Heidelberg: Springer. doi:10.1007/978-3-319-16226-3_1, .","din1505-2-1":"Holzinger, Andreas ; Röcker, Carsten ; Ziefle, Martina: From Smart Health to Smart Hospitals. In: Holzinger, A. ; Röcker, C. ; Ziefle, M. (Hrsg.): Smart Health : Open Problems and Future Challenges, Lecture Notes in Computer Science. Bd. 8700. Heidelberg : Springer, 2015, S. 1–20","ieee":"A. Holzinger, C. Röcker, and M. Ziefle, “From Smart Health to Smart Hospitals,” in Smart Health : Open Problems and Future Challenges, vol. 8700, A. Holzinger, C. Röcker, and M. Ziefle, Eds. Heidelberg: Springer, 2015, pp. 1–20.","ama":"Holzinger A, Röcker C, Ziefle M. From Smart Health to Smart Hospitals. In: Holzinger A, Röcker C, Ziefle M, eds. Smart Health : Open Problems and Future Challenges. Vol 8700. Lecture Notes in Computer Science. Heidelberg: Springer; 2015:1-20. doi:10.1007/978-3-319-16226-3_1"},"volume":8700,"title":"From Smart Health to Smart Hospitals","language":[{"iso":"eng"}],"keyword":["Smart health","Smart hospital","Ubiquitous computing","Pervasive health","P4 medicine","Context awareness","Computational intelligence"],"oa":"1","date_updated":"2023-03-15T13:49:52Z","editor":[{"full_name":"Holzinger, Andreas","first_name":"Andreas","last_name":"Holzinger"},{"full_name":"Röcker, Carsten","last_name":"Röcker","id":"61525","first_name":"Carsten"},{"last_name":"Ziefle","full_name":"Ziefle, Martina","first_name":"Martina"}],"date_created":"2021-01-08T12:03:55Z","publication":" Smart Health : Open Problems and Future Challenges","publication_identifier":{"eisbn":["978-3-319-16226-3"],"isbn":["978-3-319-16225-6"]},"publisher":"Springer","department":[{"_id":"DEP5023"}],"abstract":[{"lang":"eng","text":"Prolonged life expectancy along with the increasing complexity of medicine and health services raises health costs worldwide dramatically. Advancements in ubiquitous computing applications in combination with the use of sophisticated intelligent sensor networks may provide a basis for help. Whilst the smart health concept has much potential to support the concept of the emerging P4-medicine (preventive, participatory, predictive, and personalized), such high-tech medicine produces large amounts of high-dimensional, weakly-structured data sets and massive amounts of unstructured information. All these technological approaches along with “big data” are turning the medical sciences into a data-intensive science. To keep pace with the growing amounts of complex data, smart hospital approaches are a commandment of the future, necessitating context aware computing along with advanced interaction paradigms in new physical-digital ecosystems. In such a system the medical doctors are supported by their smart mobile medical assistants on managing their floods of data semi-automatically by following the human-in-the-loop concept. At the same time patients are supported by their health assistants to facilitate a healthier life, wellness and wellbeing."}],"publication_status":"published","series_title":"Lecture Notes in Computer Science","place":"Heidelberg","doi":"10.1007/978-3-319-16226-3_1","_id":"4338","user_id":"15514","intvolume":" 8700","type":"book_chapter"},{"editor":[{"last_name":"Speh","first_name":"Rainer","full_name":"Speh, Rainer"}],"corporate_editor":["Power Engineering Society in the VDE (ETG)"],"date_updated":"2023-08-14T13:45:41Z","date_created":"2021-01-28T10:13:27Z","publication_identifier":{"isbn":["978-3-8007-4121-2"]},"publication":"Die Energiewende : blueprints for the new energy age ; International ETG Congress 2015, November 17-18, 2015, World Conference Center, Bonn ","language":[{"iso":"eng"}],"volume":147,"citation":{"ama":"Pethig F, Schriegel S, Jasperneite J, Witte S. EMiLippe - Business E-Mobility in the Rural Region of Ostwestfalen-Lippe based on Renewable Energy. In: Speh R, Power Engineering Society in the VDE (ETG), eds. Die Energiewende : Blueprints for the New Energy Age ; International ETG Congress 2015, November 17-18, 2015, World Conference Center, Bonn . Vol 147. Energietechnische Gesellschaft (Deutschland): ETG-Fachbericht . VDI-Verl.; 2015:527-533.","ieee":"F. Pethig, S. Schriegel, J. Jasperneite, and S. Witte, “EMiLippe - Business E-Mobility in the Rural Region of Ostwestfalen-Lippe based on Renewable Energy,” in Die Energiewende : blueprints for the new energy age ; International ETG Congress 2015, November 17-18, 2015, World Conference Center, Bonn , Bonn, 2015, vol. 147, pp. 527–533.","van":"Pethig F, Schriegel S, Jasperneite J, Witte S. EMiLippe - Business E-Mobility in the Rural Region of Ostwestfalen-Lippe based on Renewable Energy. In: Speh R, Power Engineering Society in the VDE (ETG), editors. Die Energiewende : blueprints for the new energy age ; International ETG Congress 2015, November 17-18, 2015, World Conference Center, Bonn . Berlin: VDI-Verl.; 2015. p. 527–33. ( Energietechnische Gesellschaft (Deutschland): ETG-Fachbericht ; vol. 147).","ufg":"Pethig, Florian u. a.: EMiLippe - Business E-Mobility in the Rural Region of Ostwestfalen-Lippe based on Renewable Energy, in: Speh, Rainer, Power Engineering Society in the VDE (ETG) (Hgg.): Die Energiewende : blueprints for the new energy age ; International ETG Congress 2015, November 17-18, 2015, World Conference Center, Bonn , Bd. 147, Berlin 2015 ( Energietechnische Gesellschaft (Deutschland): ETG-Fachbericht ), S. 527–533.","mla":"Pethig, Florian, et al. “EMiLippe - Business E-Mobility in the Rural Region of Ostwestfalen-Lippe Based on Renewable Energy.” Die Energiewende : Blueprints for the New Energy Age ; International ETG Congress 2015, November 17-18, 2015, World Conference Center, Bonn , edited by Rainer Speh and Power Engineering Society in the VDE (ETG), vol. 147, VDI-Verl., 2015, pp. 527–33.","bjps":"Pethig F et al. (2015) EMiLippe - Business E-Mobility in the Rural Region of Ostwestfalen-Lippe Based on Renewable Energy. In Speh R and Power Engineering Society in the VDE (ETG) (eds), Die Energiewende : Blueprints for the New Energy Age ; International ETG Congress 2015, November 17-18, 2015, World Conference Center, Bonn , vol. 147. Berlin: VDI-Verl., pp. 527–533.","havard":"F. Pethig, S. Schriegel, J. Jasperneite, S. Witte, EMiLippe - Business E-Mobility in the Rural Region of Ostwestfalen-Lippe based on Renewable Energy, in: R. Speh, Power Engineering Society in the VDE (ETG) (Eds.), Die Energiewende : Blueprints for the New Energy Age ; International ETG Congress 2015, November 17-18, 2015, World Conference Center, Bonn , VDI-Verl., Berlin, 2015: pp. 527–533.","apa":"Pethig, F., Schriegel, S., Jasperneite, J., & Witte, S. (2015). EMiLippe - Business E-Mobility in the Rural Region of Ostwestfalen-Lippe based on Renewable Energy. In R. Speh & Power Engineering Society in the VDE (ETG) (Eds.), Die Energiewende : blueprints for the new energy age ; International ETG Congress 2015, November 17-18, 2015, World Conference Center, Bonn (Vol. 147, pp. 527–533). VDI-Verl.","chicago":"Pethig, Florian, Sebastian Schriegel, Jürgen Jasperneite, and Stefan Witte. “EMiLippe - Business E-Mobility in the Rural Region of Ostwestfalen-Lippe Based on Renewable Energy.” In Die Energiewende : Blueprints for the New Energy Age ; International ETG Congress 2015, November 17-18, 2015, World Conference Center, Bonn , edited by Rainer Speh and Power Engineering Society in the VDE (ETG), 147:527–33. Energietechnische Gesellschaft (Deutschland): ETG-Fachbericht . Berlin: VDI-Verl., 2015.","short":"F. Pethig, S. Schriegel, J. Jasperneite, S. Witte, in: R. Speh, Power Engineering Society in the VDE (ETG) (Eds.), Die Energiewende : Blueprints for the New Energy Age ; International ETG Congress 2015, November 17-18, 2015, World Conference Center, Bonn , VDI-Verl., Berlin, 2015, pp. 527–533.","din1505-2-1":"Pethig, Florian ; Schriegel, Sebastian ; Jasperneite, Jürgen ; Witte, Stefan: EMiLippe - Business E-Mobility in the Rural Region of Ostwestfalen-Lippe based on Renewable Energy. In: Speh, R. ; Power Engineering Society in the VDE (ETG) (Hrsg.): Die Energiewende : blueprints for the new energy age ; International ETG Congress 2015, November 17-18, 2015, World Conference Center, Bonn , Energietechnische Gesellschaft (Deutschland): ETG-Fachbericht . Bd. 147. Berlin : VDI-Verl., 2015, S. 527–533","chicago-de":"Pethig, Florian, Sebastian Schriegel, Jürgen Jasperneite und Stefan Witte. 2015. EMiLippe - Business E-Mobility in the Rural Region of Ostwestfalen-Lippe based on Renewable Energy. In: Die Energiewende : blueprints for the new energy age ; International ETG Congress 2015, November 17-18, 2015, World Conference Center, Bonn , hg. von Rainer Speh und Power Engineering Society in the VDE (ETG), 147:527–533. Energietechnische Gesellschaft (Deutschland): ETG-Fachbericht . Berlin: VDI-Verl."},"title":"EMiLippe - Business E-Mobility in the Rural Region of Ostwestfalen-Lippe based on Renewable Energy","page":"527-533","status":"public","year":"2015","author":[{"last_name":"Pethig","full_name":"Pethig, Florian","first_name":"Florian"},{"first_name":"Sebastian","full_name":"Schriegel, Sebastian","last_name":"Schriegel"},{"last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"},{"first_name":"Stefan","full_name":"Witte, Stefan","id":"1605","last_name":"Witte"}],"intvolume":" 147","user_id":"83781","type":"conference","_id":"4605","place":"Berlin","publication_status":"published","series_title":" \tEnergietechnische Gesellschaft (Deutschland): ETG-Fachbericht ","publisher":"VDI-Verl.","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"name":" International ETG Congress 2015","location":"Bonn","start_date":"2015-11-17","end_date":"2015-11-18"}},{"_id":"4606","language":[{"iso":"eng"}],"place":"Magdeburg","type":"conference","date_created":"2021-01-28T10:14:31Z","publication":"KommA 2015 – Jahreskolloquium Kommunikation in der Automation","date_updated":"2023-03-15T13:49:54Z","user_id":"74222","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"first_name":"Lars","last_name":"Dürkop","full_name":"Dürkop, Lars"},{"first_name":"Lukasz","id":"1710","full_name":"Wisniewski, Lukasz","last_name":"Wisniewski"},{"last_name":"Heymann","full_name":"Heymann, Sascha","first_name":"Sascha"},{"last_name":"Lücke","full_name":"Lücke, Benedikt","first_name":"Benedikt","id":"11178"},{"first_name":"Philip","last_name":"Priss","full_name":"Priss, Philip","id":"56901"},{"last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","id":"1899","first_name":"Jürgen"}],"year":2015,"status":"public","title":"Analyse des Inbetriebnahmeaufwandes von industriellen Produktionsanlagen anhand von Anwendungsbeispielen","citation":{"short":"L. Dürkop, L. Wisniewski, S. Heymann, B. Lücke, P. Priss, J. Jasperneite, in: KommA 2015 – Jahreskolloquium Kommunikation in Der Automation, Magdeburg, 2015.","chicago-de":"Dürkop, Lars, Lukasz Wisniewski, Sascha Heymann, Benedikt Lücke, Philip Priss und Jürgen Jasperneite. 2015. Analyse des Inbetriebnahmeaufwandes von industriellen Produktionsanlagen anhand von Anwendungsbeispielen. In: KommA 2015 – Jahreskolloquium Kommunikation in der Automation. Magdeburg.","din1505-2-1":"Dürkop, Lars ; Wisniewski, Lukasz ; Heymann, Sascha ; Lücke, Benedikt ; Priss, Philip ; Jasperneite, Jürgen: Analyse des Inbetriebnahmeaufwandes von industriellen Produktionsanlagen anhand von Anwendungsbeispielen. In: KommA 2015 – Jahreskolloquium Kommunikation in der Automation. Magdeburg, 2015","apa":"Dürkop, L., Wisniewski, L., Heymann, S., Lücke, B., Priss, P., & Jasperneite, J. (2015). Analyse des Inbetriebnahmeaufwandes von industriellen Produktionsanlagen anhand von Anwendungsbeispielen. In KommA 2015 – Jahreskolloquium Kommunikation in der Automation. Magdeburg.","chicago":"Dürkop, Lars, Lukasz Wisniewski, Sascha Heymann, Benedikt Lücke, Philip Priss, and Jürgen Jasperneite. “Analyse Des Inbetriebnahmeaufwandes von Industriellen Produktionsanlagen Anhand von Anwendungsbeispielen.” In KommA 2015 – Jahreskolloquium Kommunikation in Der Automation. Magdeburg, 2015.","van":"Dürkop L, Wisniewski L, Heymann S, Lücke B, Priss P, Jasperneite J. Analyse des Inbetriebnahmeaufwandes von industriellen Produktionsanlagen anhand von Anwendungsbeispielen. In: KommA 2015 – Jahreskolloquium Kommunikation in der Automation. Magdeburg; 2015.","ufg":"Dürkop, Lars et. al. (2015): Analyse des Inbetriebnahmeaufwandes von industriellen Produktionsanlagen anhand von Anwendungsbeispielen, in: KommA 2015 – Jahreskolloquium Kommunikation in der Automation, Magdeburg.","mla":"Dürkop, Lars, et al. “Analyse Des Inbetriebnahmeaufwandes von Industriellen Produktionsanlagen Anhand von Anwendungsbeispielen.” KommA 2015 – Jahreskolloquium Kommunikation in Der Automation, 2015.","bjps":"Dürkop L et al. (2015) Analyse Des Inbetriebnahmeaufwandes von Industriellen Produktionsanlagen Anhand von Anwendungsbeispielen. KommA 2015 – Jahreskolloquium Kommunikation in Der Automation. Magdeburg.","havard":"L. Dürkop, L. Wisniewski, S. Heymann, B. Lücke, P. Priss, J. Jasperneite, Analyse des Inbetriebnahmeaufwandes von industriellen Produktionsanlagen anhand von Anwendungsbeispielen, in: KommA 2015 – Jahreskolloquium Kommunikation in Der Automation, Magdeburg, 2015.","ieee":"L. Dürkop, L. Wisniewski, S. Heymann, B. Lücke, P. Priss, and J. Jasperneite, “Analyse des Inbetriebnahmeaufwandes von industriellen Produktionsanlagen anhand von Anwendungsbeispielen,” in KommA 2015 – Jahreskolloquium Kommunikation in der Automation, 2015.","ama":"Dürkop L, Wisniewski L, Heymann S, Lücke B, Priss P, Jasperneite J. Analyse des Inbetriebnahmeaufwandes von industriellen Produktionsanlagen anhand von Anwendungsbeispielen. In: KommA 2015 – Jahreskolloquium Kommunikation in Der Automation. Magdeburg; 2015."}},{"language":[{"iso":"eng"}],"place":"Magdeburg","_id":"4607","date_updated":"2023-03-15T13:49:54Z","user_id":"74222","type":"conference","date_created":"2021-01-28T10:15:45Z","publication":"KommA 2015 – Jahreskolloquium Kommunikation in der Automation","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"first_name":"Marco","last_name":"Ehrlich","id":"61562","full_name":"Ehrlich, Marco"},{"full_name":"Wisniewski, Lukasz","id":"1710","last_name":"Wisniewski","first_name":"Lukasz"},{"first_name":"Jürgen","last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen"}],"year":2015,"abstract":[{"lang":"eng","text":"Usage of Retrofitting for Migration of Industrial Production Lines to Industry 4.0 Abstract: Today the term Industry 4.0 (I4.0) is omnipresent and many machine builders want to benefit from the researched advantages by integrating this new technologies such as OPC UA into their products. However, due to financial reasons it is not feasible to exchange existing industrial production lines with the new I4.0 ready technologies at once. Therefore this paper will propose a retrofitting approach for the gradual migration to I4.0 by providing a defined schedule with milestones and showing different problems which can occur during retrofitting. In addition to that a new business model called Retrofitting as a Service (RaaS) for future companies will be introduced to show a possible usage of retrofitting. "}],"citation":{"ieee":"M. Ehrlich, L. Wisniewski, and J. Jasperneite, “Usage of Retrofitting for Migration of Industrial Production Lines to Industry 4.0,” in KommA 2015 – Jahreskolloquium Kommunikation in der Automation, 2015.","ama":"Ehrlich M, Wisniewski L, Jasperneite J. Usage of Retrofitting for Migration of Industrial Production Lines to Industry 4.0. In: KommA 2015 – Jahreskolloquium Kommunikation in Der Automation. Magdeburg; 2015.","chicago-de":"Ehrlich, Marco, Lukasz Wisniewski und Jürgen Jasperneite. 2015. Usage of Retrofitting for Migration of Industrial Production Lines to Industry 4.0. In: KommA 2015 – Jahreskolloquium Kommunikation in der Automation. Magdeburg.","din1505-2-1":"Ehrlich, Marco ; Wisniewski, Lukasz ; Jasperneite, Jürgen: Usage of Retrofitting for Migration of Industrial Production Lines to Industry 4.0. In: KommA 2015 – Jahreskolloquium Kommunikation in der Automation. Magdeburg, 2015","short":"M. Ehrlich, L. Wisniewski, J. Jasperneite, in: KommA 2015 – Jahreskolloquium Kommunikation in Der Automation, Magdeburg, 2015.","chicago":"Ehrlich, Marco, Lukasz Wisniewski, and Jürgen Jasperneite. “Usage of Retrofitting for Migration of Industrial Production Lines to Industry 4.0.” In KommA 2015 – Jahreskolloquium Kommunikation in Der Automation. Magdeburg, 2015.","apa":"Ehrlich, M., Wisniewski, L., & Jasperneite, J. (2015). Usage of Retrofitting for Migration of Industrial Production Lines to Industry 4.0. In KommA 2015 – Jahreskolloquium Kommunikation in der Automation. Magdeburg.","bjps":"Ehrlich M, Wisniewski L and Jasperneite J (2015) Usage of Retrofitting for Migration of Industrial Production Lines to Industry 4.0. KommA 2015 – Jahreskolloquium Kommunikation in Der Automation. Magdeburg.","havard":"M. Ehrlich, L. Wisniewski, J. Jasperneite, Usage of Retrofitting for Migration of Industrial Production Lines to Industry 4.0, in: KommA 2015 – Jahreskolloquium Kommunikation in Der Automation, Magdeburg, 2015.","mla":"Ehrlich, Marco, et al. “Usage of Retrofitting for Migration of Industrial Production Lines to Industry 4.0.” KommA 2015 – Jahreskolloquium Kommunikation in Der Automation, 2015.","ufg":"Ehrlich, Marco et. al. (2015): Usage of Retrofitting for Migration of Industrial Production Lines to Industry 4.0, in: KommA 2015 – Jahreskolloquium Kommunikation in der Automation, Magdeburg.","van":"Ehrlich M, Wisniewski L, Jasperneite J. Usage of Retrofitting for Migration of Industrial Production Lines to Industry 4.0. In: KommA 2015 – Jahreskolloquium Kommunikation in der Automation. Magdeburg; 2015."},"title":"Usage of Retrofitting for Migration of Industrial Production Lines to Industry 4.0"},{"volume":63,"citation":{"van":"Schleipen M, Lüder A, Sauer O, Flatt H, Jasperneite J. Anforderungen und Konzepte für Plug-and-Work - Adaptivität im Kontext von Industrie 4.0. at - Automatisierungstechnik. 2015;63:801–820.","ama":"Schleipen M, Lüder A, Sauer O, Flatt H, Jasperneite J. Anforderungen und Konzepte für Plug-and-Work - Adaptivität im Kontext von Industrie 4.0. at - Automatisierungstechnik. 2015;63:801–820.","ufg":"Schleipen, Miriam et. al. (2015): Anforderungen und Konzepte für Plug-and-Work - Adaptivität im Kontext von Industrie 4.0, in: at - Automatisierungstechnik 63, S. 801–820.","havard":"M. Schleipen, A. Lüder, O. Sauer, H. Flatt, J. Jasperneite, Anforderungen und Konzepte für Plug-and-Work - Adaptivität im Kontext von Industrie 4.0, At - Automatisierungstechnik. 63 (2015) 801–820.","bjps":"Schleipen M et al. (2015) Anforderungen Und Konzepte Für Plug-and-Work - Adaptivität Im Kontext von Industrie 4.0. at - Automatisierungstechnik 63, 801–820.","mla":"Schleipen, Miriam, et al. “Anforderungen Und Konzepte Für Plug-and-Work - Adaptivität Im Kontext von Industrie 4.0.” At - Automatisierungstechnik, vol. 63, 2015, pp. 801–820.","apa":"Schleipen, M., Lüder, A., Sauer, O., Flatt, H., & Jasperneite, J. (2015). Anforderungen und Konzepte für Plug-and-Work - Adaptivität im Kontext von Industrie 4.0. At - Automatisierungstechnik, 63, 801–820.","ieee":"M. Schleipen, A. Lüder, O. Sauer, H. Flatt, and J. Jasperneite, “Anforderungen und Konzepte für Plug-and-Work - Adaptivität im Kontext von Industrie 4.0,” at - Automatisierungstechnik, vol. 63, pp. 801–820, 2015.","chicago":"Schleipen, Miriam, Arndt Lüder, Olaf Sauer, Holger Flatt, and Jürgen Jasperneite. “Anforderungen Und Konzepte Für Plug-and-Work - Adaptivität Im Kontext von Industrie 4.0.” At - Automatisierungstechnik 63 (2015): 801–820.","short":"M. Schleipen, A. Lüder, O. Sauer, H. Flatt, J. Jasperneite, At - Automatisierungstechnik 63 (2015) 801–820.","din1505-2-1":"Schleipen, Miriam ; Lüder, Arndt ; Sauer, Olaf ; Flatt, Holger ; Jasperneite, Jürgen: Anforderungen und Konzepte für Plug-and-Work - Adaptivität im Kontext von Industrie 4.0. In: at - Automatisierungstechnik Bd. 63 (2015), S. 801–820","chicago-de":"Schleipen, Miriam, Arndt Lüder, Olaf Sauer, Holger Flatt und Jürgen Jasperneite. 2015. Anforderungen und Konzepte für Plug-and-Work - Adaptivität im Kontext von Industrie 4.0. at - Automatisierungstechnik 63: 801–820."},"title":"Anforderungen und Konzepte für Plug-and-Work - Adaptivität im Kontext von Industrie 4.0","page":"801–820","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"full_name":"Schleipen, Miriam","first_name":"Miriam","last_name":"Schleipen"},{"first_name":"Arndt","full_name":"Lüder, Arndt","last_name":"Lüder"},{"first_name":"Olaf","full_name":"Sauer, Olaf","last_name":"Sauer"},{"full_name":"Flatt, Holger","last_name":"Flatt","id":"58494","first_name":"Holger"},{"first_name":"Jürgen","id":"1899","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite"}],"year":2015,"intvolume":" 63","date_updated":"2023-03-15T13:49:54Z","user_id":"74222","date_created":"2021-01-28T10:16:32Z","type":"journal_article","publication":"at - Automatisierungstechnik","_id":"4608","language":[{"iso":"eng"}]},{"language":[{"iso":"eng"}],"_id":"4609","user_id":"74222","date_updated":"2023-03-15T13:49:54Z","intvolume":" 63","publication":"at - Automatisierungstechnik","type":"journal_article","date_created":"2021-01-28T10:17:54Z","status":"public","page":"751–752","author":[{"first_name":"Jürgen","full_name":"Beyerer, Jürgen","last_name":"Beyerer"},{"first_name":"Jürgen","id":"1899","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite"},{"first_name":"Olaf","last_name":"Sauer","full_name":"Sauer, Olaf"}],"year":2015,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"volume":63,"citation":{"apa":"Beyerer, J., Jasperneite, J., & Sauer, O. (2015). Industrie 4.0. At - Automatisierungstechnik, 63, 751–752.","ieee":"J. Beyerer, J. Jasperneite, and O. Sauer, “Industrie 4.0,” at - Automatisierungstechnik, vol. 63, pp. 751–752, 2015.","chicago":"Beyerer, Jürgen, Jürgen Jasperneite, and Olaf Sauer. “Industrie 4.0.” At - Automatisierungstechnik 63 (2015): 751–752.","van":"Beyerer J, Jasperneite J, Sauer O. Industrie 4.0. at - Automatisierungstechnik. 2015;63:751–752.","ama":"Beyerer J, Jasperneite J, Sauer O. Industrie 4.0. at - Automatisierungstechnik. 2015;63:751–752.","ufg":"Beyerer, Jürgen et. al. (2015): Industrie 4.0, in: at - Automatisierungstechnik 63, S. 751–752.","havard":"J. Beyerer, J. Jasperneite, O. Sauer, Industrie 4.0, At - Automatisierungstechnik. 63 (2015) 751–752.","mla":"Beyerer, Jürgen, et al. “Industrie 4.0.” At - Automatisierungstechnik, vol. 63, 2015, pp. 751–752.","bjps":"Beyerer J, Jasperneite J and Sauer O (2015) Industrie 4.0. at - Automatisierungstechnik 63, 751–752.","short":"J. Beyerer, J. Jasperneite, O. Sauer, At - Automatisierungstechnik 63 (2015) 751–752.","din1505-2-1":"Beyerer, Jürgen ; Jasperneite, Jürgen ; Sauer, Olaf: Industrie 4.0. In: at - Automatisierungstechnik Bd. 63 (2015), S. 751–752","chicago-de":"Beyerer, Jürgen, Jürgen Jasperneite und Olaf Sauer. 2015. Industrie 4.0. at - Automatisierungstechnik 63: 751–752."},"title":"Industrie 4.0"},{"citation":{"din1505-2-1":"Schriegel, Sebastian ; Biendarra, Alexander ; Ronen, Opher ; Flatt, Holger ; Lessmann, Gunnar ; Jasperneite, Jürgen: Automatic Determination of Synchronization Path Quality using PTP Bridges with Integrated Inaccuracy Estimation for System Configuration and Monitoring. In: ISPCS 2015, 2015","chicago-de":"Schriegel, Sebastian, Alexander Biendarra, Opher Ronen, Holger Flatt, Gunnar Lessmann und Jürgen Jasperneite. 2015. Automatic Determination of Synchronization Path Quality using PTP Bridges with Integrated Inaccuracy Estimation for System Configuration and Monitoring. In: ISPCS 2015.","short":"S. Schriegel, A. Biendarra, O. Ronen, H. Flatt, G. Lessmann, J. Jasperneite, in: ISPCS 2015, 2015.","mla":"Schriegel, Sebastian, et al. “Automatic Determination of Synchronization Path Quality Using PTP Bridges with Integrated Inaccuracy Estimation for System Configuration and Monitoring.” ISPCS 2015, 2015.","havard":"S. Schriegel, A. Biendarra, O. Ronen, H. Flatt, G. Lessmann, J. Jasperneite, Automatic Determination of Synchronization Path Quality using PTP Bridges with Integrated Inaccuracy Estimation for System Configuration and Monitoring, in: ISPCS 2015, 2015.","bjps":"Schriegel S et al. (2015) Automatic Determination of Synchronization Path Quality Using PTP Bridges with Integrated Inaccuracy Estimation for System Configuration and Monitoring. ISPCS 2015.","ufg":"Schriegel, Sebastian et. al. (2015): Automatic Determination of Synchronization Path Quality using PTP Bridges with Integrated Inaccuracy Estimation for System Configuration and Monitoring, in: ISPCS 2015.","van":"Schriegel S, Biendarra A, Ronen O, Flatt H, Lessmann G, Jasperneite J. Automatic Determination of Synchronization Path Quality using PTP Bridges with Integrated Inaccuracy Estimation for System Configuration and Monitoring. In: ISPCS 2015. 2015.","chicago":"Schriegel, Sebastian, Alexander Biendarra, Opher Ronen, Holger Flatt, Gunnar Lessmann, and Jürgen Jasperneite. “Automatic Determination of Synchronization Path Quality Using PTP Bridges with Integrated Inaccuracy Estimation for System Configuration and Monitoring.” In ISPCS 2015, 2015.","apa":"Schriegel, S., Biendarra, A., Ronen, O., Flatt, H., Lessmann, G., & Jasperneite, J. (2015). Automatic Determination of Synchronization Path Quality using PTP Bridges with Integrated Inaccuracy Estimation for System Configuration and Monitoring. In ISPCS 2015.","ama":"Schriegel S, Biendarra A, Ronen O, Flatt H, Lessmann G, Jasperneite J. Automatic Determination of Synchronization Path Quality using PTP Bridges with Integrated Inaccuracy Estimation for System Configuration and Monitoring. In: ISPCS 2015. ; 2015.","ieee":"S. Schriegel, A. Biendarra, O. Ronen, H. Flatt, G. Lessmann, and J. Jasperneite, “Automatic Determination of Synchronization Path Quality using PTP Bridges with Integrated Inaccuracy Estimation for System Configuration and Monitoring,” in ISPCS 2015, 2015."},"title":"Automatic Determination of Synchronization Path Quality using PTP Bridges with Integrated Inaccuracy Estimation for System Configuration and Monitoring","status":"public","year":2015,"author":[{"full_name":"Schriegel, Sebastian","first_name":"Sebastian","last_name":"Schriegel"},{"last_name":"Biendarra","first_name":"Alexander","full_name":"Biendarra, Alexander"},{"first_name":"Opher","full_name":"Ronen, Opher","last_name":"Ronen"},{"last_name":"Flatt","first_name":"Holger","full_name":"Flatt, Holger","id":"58494"},{"first_name":"Gunnar","last_name":"Lessmann","full_name":"Lessmann, Gunnar"},{"last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","id":"1899","first_name":"Jürgen"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"user_id":"74222","date_updated":"2023-03-15T13:49:54Z","publication":"ISPCS 2015","date_created":"2021-01-28T10:18:51Z","type":"conference","language":[{"iso":"eng"}],"_id":"4610"},{"citation":{"ama":"Jasperneite J, Lohweg V. Intelligente Vernetzung für die fexible Produktion von morgen. ETZ (2015). 2015;10:32-35d.","ieee":"J. Jasperneite and V. Lohweg, “Intelligente Vernetzung für die fexible Produktion von morgen,” ETZ (2015), vol. 10, pp. 32-35d, 2015.","short":"J. Jasperneite, V. Lohweg, ETZ (2015) 10 (2015) 32-35d.","chicago-de":"Jasperneite, Jürgen und Volker Lohweg. 2015. Intelligente Vernetzung für die fexible Produktion von morgen. ETZ (2015) 10: 32-35d.","din1505-2-1":"Jasperneite, Jürgen ; Lohweg, Volker: Intelligente Vernetzung für die fexible Produktion von morgen. In: ETZ (2015) Bd. 10 (2015), S. 32-35d","van":"Jasperneite J, Lohweg V. Intelligente Vernetzung für die fexible Produktion von morgen. ETZ (2015). 2015;10:32-35d.","ufg":"Jasperneite, Jürgen/Lohweg, Volker (2015): Intelligente Vernetzung für die fexible Produktion von morgen, in: ETZ (2015) 10, S. 32-35d.","bjps":"Jasperneite J and Lohweg V (2015) Intelligente Vernetzung Für Die Fexible Produktion von Morgen. ETZ (2015) 10, 32-35d.","mla":"Jasperneite, Jürgen, and Volker Lohweg. “Intelligente Vernetzung Für Die Fexible Produktion von Morgen.” ETZ (2015), vol. 10, 2015, pp. 32-35d.","havard":"J. Jasperneite, V. Lohweg, Intelligente Vernetzung für die fexible Produktion von morgen, ETZ (2015). 10 (2015) 32-35d.","apa":"Jasperneite, J., & Lohweg, V. (2015). Intelligente Vernetzung für die fexible Produktion von morgen. ETZ (2015), 10, 32-35d.","chicago":"Jasperneite, Jürgen, and Volker Lohweg. “Intelligente Vernetzung Für Die Fexible Produktion von Morgen.” ETZ (2015) 10 (2015): 32-35d."},"volume":10,"title":"Intelligente Vernetzung für die fexible Produktion von morgen","page":"32 - 35d","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2015,"author":[{"id":"1899","first_name":"Jürgen","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite"},{"id":"1804","full_name":"Lohweg, Volker","first_name":"Volker","last_name":"Lohweg","orcid":"https://orcid.org/0000-0002-3325-7887"}],"intvolume":" 10","date_updated":"2023-03-15T13:49:54Z","user_id":"74222","type":"journal_article","date_created":"2021-01-28T10:19:53Z","publication":"ETZ (2015)","_id":"4611","language":[{"iso":"eng"}]},{"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"}],"year":2015,"publisher":"GI","status":"public","title":"Smart Factory based on intelligent technical systems ","citation":{"din1505-2-1":"Jasperneite, Jürgen: Smart Factory based on intelligent technical systems . In: Workshop Industrie 4.0: Informatik gestaltet neue Produktionssysteme anlässlich 45. Jahrestagung der Gesellschaft für Informatik (invited talk). Cottbus : GI, 2015","chicago-de":"Jasperneite, Jürgen. 2015. Smart Factory based on intelligent technical systems . In: Workshop Industrie 4.0: Informatik gestaltet neue Produktionssysteme anlässlich 45. Jahrestagung der Gesellschaft für Informatik (invited talk). Cottbus: GI.","short":"J. Jasperneite, in: Workshop Industrie 4.0: Informatik Gestaltet Neue Produktionssysteme Anlässlich 45. Jahrestagung Der Gesellschaft Für Informatik (Invited Talk), GI, Cottbus, 2015.","bjps":"Jasperneite J (2015) Smart Factory Based on Intelligent Technical Systems . Workshop Industrie 4.0: Informatik Gestaltet Neue Produktionssysteme Anlässlich 45. Jahrestagung Der Gesellschaft Für Informatik (Invited Talk). Cottbus: GI.","havard":"J. Jasperneite, Smart Factory based on intelligent technical systems , in: Workshop Industrie 4.0: Informatik Gestaltet Neue Produktionssysteme Anlässlich 45. Jahrestagung Der Gesellschaft Für Informatik (Invited Talk), GI, Cottbus, 2015.","mla":"Jasperneite, Jürgen. “Smart Factory Based on Intelligent Technical Systems .” Workshop Industrie 4.0: Informatik Gestaltet Neue Produktionssysteme Anlässlich 45. Jahrestagung Der Gesellschaft Für Informatik (Invited Talk), GI, 2015.","ufg":"Jasperneite, Jürgen (2015): Smart Factory based on intelligent technical systems , in: Workshop Industrie 4.0: Informatik gestaltet neue Produktionssysteme anlässlich 45. Jahrestagung der Gesellschaft für Informatik (invited talk), Cottbus.","ama":"Jasperneite J. Smart Factory based on intelligent technical systems . In: Workshop Industrie 4.0: Informatik Gestaltet Neue Produktionssysteme Anlässlich 45. Jahrestagung Der Gesellschaft Für Informatik (Invited Talk). Cottbus: GI; 2015.","van":"Jasperneite J. Smart Factory based on intelligent technical systems . In: Workshop Industrie 40: Informatik gestaltet neue Produktionssysteme anlässlich 45 Jahrestagung der Gesellschaft für Informatik (invited talk). Cottbus: GI; 2015.","chicago":"Jasperneite, Jürgen. “Smart Factory Based on Intelligent Technical Systems .” In Workshop Industrie 4.0: Informatik Gestaltet Neue Produktionssysteme Anlässlich 45. Jahrestagung Der Gesellschaft Für Informatik (Invited Talk). Cottbus: GI, 2015.","ieee":"J. Jasperneite, “Smart Factory based on intelligent technical systems ,” in Workshop Industrie 4.0: Informatik gestaltet neue Produktionssysteme anlässlich 45. Jahrestagung der Gesellschaft für Informatik (invited talk), 2015.","apa":"Jasperneite, J. (2015). Smart Factory based on intelligent technical systems . In Workshop Industrie 4.0: Informatik gestaltet neue Produktionssysteme anlässlich 45. Jahrestagung der Gesellschaft für Informatik (invited talk). Cottbus: GI."},"_id":"4612","language":[{"iso":"eng"}],"place":"Cottbus","date_created":"2021-01-28T10:20:45Z","type":"conference","publication":"Workshop Industrie 4.0: Informatik gestaltet neue Produktionssysteme anlässlich 45. Jahrestagung der Gesellschaft für Informatik (invited talk)","date_updated":"2023-03-15T13:49:54Z","user_id":"74222"},{"publication":"GI-Edition - Lecture Notes in Informatics (LNI): INFORMATIK 2015","type":"conference","date_created":"2021-01-28T10:21:46Z","user_id":"74222","date_updated":"2023-03-15T13:49:54Z","place":"Cottbus","language":[{"iso":"eng"}],"_id":"4613","title":"Universelle Echtzeit-Ethernet Architektur zur Integration in rekonfigurierbare Automatisierungssysteme","citation":{"din1505-2-1":"Ax, Johannes ; Buda, Aurel ; Schneider, Daniel ; Hartfiel, John ; Dürkop, Lars ; Jungeblut, Thorsten ; Jasperneite, Jürgen ; Vedral, Andreas ; u. a.: Universelle Echtzeit-Ethernet Architektur zur Integration in rekonfigurierbare Automatisierungssysteme. In: GI-Edition - Lecture Notes in Informatics (LNI): INFORMATIK 2015. Cottbus, 2015","chicago-de":"Ax, Johannes, Aurel Buda, Daniel Schneider, John Hartfiel, Lars Dürkop, Thorsten Jungeblut, Jürgen Jasperneite, Andreas Vedral und Ulrich Rückert. 2015. Universelle Echtzeit-Ethernet Architektur zur Integration in rekonfigurierbare Automatisierungssysteme. In: GI-Edition - Lecture Notes in Informatics (LNI): INFORMATIK 2015. Cottbus.","short":"J. Ax, A. Buda, D. Schneider, J. Hartfiel, L. Dürkop, T. Jungeblut, J. Jasperneite, A. Vedral, U. Rückert, in: GI-Edition - Lecture Notes in Informatics (LNI): INFORMATIK 2015, Cottbus, 2015.","chicago":"Ax, Johannes, Aurel Buda, Daniel Schneider, John Hartfiel, Lars Dürkop, Thorsten Jungeblut, Jürgen Jasperneite, Andreas Vedral, and Ulrich Rückert. “Universelle Echtzeit-Ethernet Architektur Zur Integration in Rekonfigurierbare Automatisierungssysteme.” In GI-Edition - Lecture Notes in Informatics (LNI): INFORMATIK 2015. Cottbus, 2015.","apa":"Ax, J., Buda, A., Schneider, D., Hartfiel, J., Dürkop, L., Jungeblut, T., … Rückert, U. (2015). Universelle Echtzeit-Ethernet Architektur zur Integration in rekonfigurierbare Automatisierungssysteme. In GI-Edition - Lecture Notes in Informatics (LNI): INFORMATIK 2015. Cottbus.","ieee":"J. Ax et al., “Universelle Echtzeit-Ethernet Architektur zur Integration in rekonfigurierbare Automatisierungssysteme,” in GI-Edition - Lecture Notes in Informatics (LNI): INFORMATIK 2015, 2015.","ufg":"Ax, Johannes et. al. (2015): Universelle Echtzeit-Ethernet Architektur zur Integration in rekonfigurierbare Automatisierungssysteme, in: GI-Edition - Lecture Notes in Informatics (LNI): INFORMATIK 2015, Cottbus.","bjps":"Ax J et al. (2015) Universelle Echtzeit-Ethernet Architektur Zur Integration in Rekonfigurierbare Automatisierungssysteme. GI-Edition - Lecture Notes in Informatics (LNI): INFORMATIK 2015. Cottbus.","mla":"Ax, Johannes, et al. “Universelle Echtzeit-Ethernet Architektur Zur Integration in Rekonfigurierbare Automatisierungssysteme.” GI-Edition - Lecture Notes in Informatics (LNI): INFORMATIK 2015, 2015.","havard":"J. Ax, A. Buda, D. Schneider, J. Hartfiel, L. Dürkop, T. Jungeblut, J. Jasperneite, A. Vedral, U. Rückert, Universelle Echtzeit-Ethernet Architektur zur Integration in rekonfigurierbare Automatisierungssysteme, in: GI-Edition - Lecture Notes in Informatics (LNI): INFORMATIK 2015, Cottbus, 2015.","van":"Ax J, Buda A, Schneider D, Hartfiel J, Dürkop L, Jungeblut T, et al. Universelle Echtzeit-Ethernet Architektur zur Integration in rekonfigurierbare Automatisierungssysteme. In: GI-Edition - Lecture Notes in Informatics (LNI): INFORMATIK 2015. Cottbus; 2015.","ama":"Ax J, Buda A, Schneider D, et al. Universelle Echtzeit-Ethernet Architektur zur Integration in rekonfigurierbare Automatisierungssysteme. In: GI-Edition - Lecture Notes in Informatics (LNI): INFORMATIK 2015. Cottbus; 2015."},"year":2015,"author":[{"last_name":"Ax","first_name":"Johannes","full_name":"Ax, Johannes"},{"first_name":"Aurel","full_name":"Buda, Aurel","last_name":"Buda"},{"first_name":"Daniel","full_name":"Schneider, Daniel","last_name":"Schneider"},{"first_name":"John","full_name":"Hartfiel, John","last_name":"Hartfiel"},{"first_name":"Lars","full_name":"Dürkop, Lars","last_name":"Dürkop"},{"full_name":"Jungeblut, Thorsten","first_name":"Thorsten","last_name":"Jungeblut"},{"first_name":"Jürgen","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","id":"1899"},{"first_name":"Andreas","last_name":"Vedral","full_name":"Vedral, Andreas"},{"first_name":"Ulrich","full_name":"Rückert, Ulrich","last_name":"Rückert"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public"},{"_id":"4614","place":"Frankfurt","language":[{"iso":"eng"}],"user_id":"74222","date_updated":"2023-03-15T13:49:54Z","publication":"25 Jahre DFAM-Symposium \"Stand und zukünftige Entwicklungen von Mikroelektronik und Automatisierung\" (eingeladener Vortrag) ","type":"conference","date_created":"2021-01-28T10:24:23Z","publisher":"Deutsche Forschungsgesellschaft für Automatisierung und Mikroelektronik e.V. (DFAM)","status":"public","author":[{"first_name":"Jürgen","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","id":"1899"}],"year":2015,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"citation":{"chicago":"Jasperneite, Jürgen. “Zukünftige Entwicklungen Der Industriellen Kommunikation .” In 25 Jahre DFAM-Symposium “Stand Und Zukünftige Entwicklungen von Mikroelektronik Und Automatisierung” (Eingeladener Vortrag) . Frankfurt: Deutsche Forschungsgesellschaft für Automatisierung und Mikroelektronik e.V. (DFAM), 2015.","ieee":"J. Jasperneite, “Zukünftige Entwicklungen der industriellen Kommunikation ,” in 25 Jahre DFAM-Symposium “Stand und zukünftige Entwicklungen von Mikroelektronik und Automatisierung” (eingeladener Vortrag) , 2015.","apa":"Jasperneite, J. (2015). Zukünftige Entwicklungen der industriellen Kommunikation . In 25 Jahre DFAM-Symposium “Stand und zukünftige Entwicklungen von Mikroelektronik und Automatisierung” (eingeladener Vortrag) . Frankfurt: Deutsche Forschungsgesellschaft für Automatisierung und Mikroelektronik e.V. (DFAM).","mla":"Jasperneite, Jürgen. “Zukünftige Entwicklungen Der Industriellen Kommunikation .” 25 Jahre DFAM-Symposium “Stand Und Zukünftige Entwicklungen von Mikroelektronik Und Automatisierung” (Eingeladener Vortrag) , Deutsche Forschungsgesellschaft für Automatisierung und Mikroelektronik e.V. (DFAM), 2015.","havard":"J. Jasperneite, Zukünftige Entwicklungen der industriellen Kommunikation , in: 25 Jahre DFAM-Symposium “Stand Und Zukünftige Entwicklungen von Mikroelektronik Und Automatisierung” (Eingeladener Vortrag) , Deutsche Forschungsgesellschaft für Automatisierung und Mikroelektronik e.V. (DFAM), Frankfurt, 2015.","bjps":"Jasperneite J (2015) Zukünftige Entwicklungen Der Industriellen Kommunikation . 25 Jahre DFAM-Symposium ‘Stand Und Zukünftige Entwicklungen von Mikroelektronik Und Automatisierung’ (Eingeladener Vortrag) . Frankfurt: Deutsche Forschungsgesellschaft für Automatisierung und Mikroelektronik e.V. (DFAM).","ufg":"Jasperneite, Jürgen (2015): Zukünftige Entwicklungen der industriellen Kommunikation , in: 25 Jahre DFAM-Symposium „Stand und zukünftige Entwicklungen von Mikroelektronik und Automatisierung“ (eingeladener Vortrag) , Frankfurt.","ama":"Jasperneite J. Zukünftige Entwicklungen der industriellen Kommunikation . In: 25 Jahre DFAM-Symposium “Stand Und Zukünftige Entwicklungen von Mikroelektronik Und Automatisierung” (Eingeladener Vortrag) . Frankfurt: Deutsche Forschungsgesellschaft für Automatisierung und Mikroelektronik e.V. (DFAM); 2015.","van":"Jasperneite J. Zukünftige Entwicklungen der industriellen Kommunikation . In: 25 Jahre DFAM-Symposium “Stand und zukünftige Entwicklungen von Mikroelektronik und Automatisierung” (eingeladener Vortrag) . Frankfurt: Deutsche Forschungsgesellschaft für Automatisierung und Mikroelektronik e.V. (DFAM); 2015.","chicago-de":"Jasperneite, Jürgen. 2015. Zukünftige Entwicklungen der industriellen Kommunikation . In: 25 Jahre DFAM-Symposium „Stand und zukünftige Entwicklungen von Mikroelektronik und Automatisierung“ (eingeladener Vortrag) . Frankfurt: Deutsche Forschungsgesellschaft für Automatisierung und Mikroelektronik e.V. (DFAM).","din1505-2-1":"Jasperneite, Jürgen: Zukünftige Entwicklungen der industriellen Kommunikation . In: 25 Jahre DFAM-Symposium „Stand und zukünftige Entwicklungen von Mikroelektronik und Automatisierung“ (eingeladener Vortrag) . Frankfurt : Deutsche Forschungsgesellschaft für Automatisierung und Mikroelektronik e.V. (DFAM), 2015","short":"J. Jasperneite, in: 25 Jahre DFAM-Symposium “Stand Und Zukünftige Entwicklungen von Mikroelektronik Und Automatisierung” (Eingeladener Vortrag) , Deutsche Forschungsgesellschaft für Automatisierung und Mikroelektronik e.V. (DFAM), Frankfurt, 2015."},"title":"Zukünftige Entwicklungen der industriellen Kommunikation "},{"status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2015,"author":[{"first_name":"Lars","full_name":"Dürkop, Lars","last_name":"Dürkop"},{"first_name":"Lukasz","full_name":"Wisniewski, Lukasz","last_name":"Wisniewski","id":"1710"},{"first_name":"Sascha","full_name":"Heymann, Sascha","last_name":"Heymann"},{"full_name":"Lücke, Benedikt","id":"11178","last_name":"Lücke","first_name":"Benedikt"},{"id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen","last_name":"Jasperneite"}],"citation":{"din1505-2-1":"Dürkop, Lars ; Wisniewski, Lukasz ; Heymann, Sascha ; Lücke, Benedikt ; Jasperneite, Jürgen: Analyzing the engineering effort for the commissioning of industrial automation systems. In: 20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Luxembourg, 2015","chicago-de":"Dürkop, Lars, Lukasz Wisniewski, Sascha Heymann, Benedikt Lücke und Jürgen Jasperneite. 2015. Analyzing the engineering effort for the commissioning of industrial automation systems. In: 20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Luxembourg.","short":"L. Dürkop, L. Wisniewski, S. Heymann, B. Lücke, J. Jasperneite, in: 20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Luxembourg, 2015.","ufg":"Dürkop, Lars et. al. (2015): Analyzing the engineering effort for the commissioning of industrial automation systems, in: 20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Luxembourg.","bjps":"Dürkop L et al. (2015) Analyzing the Engineering Effort for the Commissioning of Industrial Automation Systems. 20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Luxembourg.","havard":"L. Dürkop, L. Wisniewski, S. Heymann, B. Lücke, J. Jasperneite, Analyzing the engineering effort for the commissioning of industrial automation systems, in: 20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Luxembourg, 2015.","mla":"Dürkop, Lars, et al. “Analyzing the Engineering Effort for the Commissioning of Industrial Automation Systems.” 20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2015.","van":"Dürkop L, Wisniewski L, Heymann S, Lücke B, Jasperneite J. Analyzing the engineering effort for the commissioning of industrial automation systems. In: 20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Luxembourg; 2015.","chicago":"Dürkop, Lars, Lukasz Wisniewski, Sascha Heymann, Benedikt Lücke, and Jürgen Jasperneite. “Analyzing the Engineering Effort for the Commissioning of Industrial Automation Systems.” In 20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Luxembourg, 2015.","apa":"Dürkop, L., Wisniewski, L., Heymann, S., Lücke, B., & Jasperneite, J. (2015). Analyzing the engineering effort for the commissioning of industrial automation systems. In 20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Luxembourg.","ama":"Dürkop L, Wisniewski L, Heymann S, Lücke B, Jasperneite J. Analyzing the engineering effort for the commissioning of industrial automation systems. In: 20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Luxembourg; 2015.","ieee":"L. Dürkop, L. Wisniewski, S. Heymann, B. Lücke, and J. Jasperneite, “Analyzing the engineering effort for the commissioning of industrial automation systems,” in 20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2015."},"title":"Analyzing the engineering effort for the commissioning of industrial automation systems","_id":"4615","language":[{"iso":"eng"}],"place":"Luxembourg","date_updated":"2023-03-15T13:49:54Z","user_id":"74222","type":"conference","date_created":"2021-01-28T10:26:27Z","publication":"20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)"},{"date_updated":"2023-03-15T13:49:54Z","user_id":"74222","date_created":"2021-01-28T10:27:24Z","type":"conference","publication":"IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015)","_id":"4616","language":[{"iso":"eng"}],"place":"Luxembourg","citation":{"ieee":"D. Henneke, M. Elattar, and J. Jasperneite, “Communication Patterns for Cyber-Physical Systems,” in IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015), 2015.","ama":"Henneke D, Elattar M, Jasperneite J. Communication Patterns for Cyber-Physical Systems. In: IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015). Luxembourg; 2015.","apa":"Henneke, D., Elattar, M., & Jasperneite, J. (2015). Communication Patterns for Cyber-Physical Systems. In IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015). Luxembourg.","chicago":"Henneke, Dominik, Mohammad Elattar, and Jürgen Jasperneite. “Communication Patterns for Cyber-Physical Systems.” In IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015). Luxembourg, 2015.","van":"Henneke D, Elattar M, Jasperneite J. Communication Patterns for Cyber-Physical Systems. In: IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015). Luxembourg; 2015.","ufg":"Henneke, Dominik et. al. (2015): Communication Patterns for Cyber-Physical Systems, in: IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015), Luxembourg.","havard":"D. Henneke, M. Elattar, J. Jasperneite, Communication Patterns for Cyber-Physical Systems, in: IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015), Luxembourg, 2015.","bjps":"Henneke D, Elattar M and Jasperneite J (2015) Communication Patterns for Cyber-Physical Systems. IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015). Luxembourg.","mla":"Henneke, Dominik, et al. “Communication Patterns for Cyber-Physical Systems.” IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015), 2015.","short":"D. Henneke, M. Elattar, J. Jasperneite, in: IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015), Luxembourg, 2015.","chicago-de":"Henneke, Dominik, Mohammad Elattar und Jürgen Jasperneite. 2015. Communication Patterns for Cyber-Physical Systems. In: IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015). Luxembourg.","din1505-2-1":"Henneke, Dominik ; Elattar, Mohammad ; Jasperneite, Jürgen: Communication Patterns for Cyber-Physical Systems. In: IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015). Luxembourg, 2015"},"title":"Communication Patterns for Cyber-Physical Systems","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2015,"author":[{"first_name":"Dominik","last_name":"Henneke","id":"52007","full_name":"Henneke, Dominik"},{"first_name":"Mohammad","last_name":"Elattar","full_name":"Elattar, Mohammad","id":"58263"},{"last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","id":"1899","first_name":"Jürgen"}]},{"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2015,"author":[{"id":"58494","full_name":"Flatt, Holger","last_name":"Flatt","first_name":"Holger"},{"last_name":"Koch","first_name":"Nils","full_name":"Koch, Nils"},{"full_name":"Guenter, Andrei","first_name":"Andrei","last_name":"Guenter"},{"first_name":"Carsten","last_name":"Röcker","id":"61525","full_name":"Röcker, Carsten"},{"last_name":"Jasperneite","id":"1899","first_name":"Jürgen","full_name":"Jasperneite, Jürgen"}],"status":"public","title":"A Context-Aware Assistance System for Maintenance Applications in Smart Factories based on Augmented Reality and Indoor Localization","citation":{"short":"H. Flatt, N. Koch, A. Guenter, C. Röcker, J. Jasperneite, in: ETFA 2015, 2015.","din1505-2-1":"Flatt, Holger ; Koch, Nils ; Guenter, Andrei ; Röcker, Carsten ; Jasperneite, Jürgen: A Context-Aware Assistance System for Maintenance Applications in Smart Factories based on Augmented Reality and Indoor Localization. In: ETFA 2015, 2015","chicago-de":"Flatt, Holger, Nils Koch, Andrei Guenter, Carsten Röcker und Jürgen Jasperneite. 2015. A Context-Aware Assistance System for Maintenance Applications in Smart Factories based on Augmented Reality and Indoor Localization. In: ETFA 2015.","ieee":"H. Flatt, N. Koch, A. Guenter, C. Röcker, and J. Jasperneite, “A Context-Aware Assistance System for Maintenance Applications in Smart Factories based on Augmented Reality and Indoor Localization,” in ETFA 2015, 2015.","apa":"Flatt, H., Koch, N., Guenter, A., Röcker, C., & Jasperneite, J. (2015). A Context-Aware Assistance System for Maintenance Applications in Smart Factories based on Augmented Reality and Indoor Localization. In ETFA 2015.","chicago":"Flatt, Holger, Nils Koch, Andrei Guenter, Carsten Röcker, and Jürgen Jasperneite. “A Context-Aware Assistance System for Maintenance Applications in Smart Factories Based on Augmented Reality and Indoor Localization.” In ETFA 2015, 2015.","ama":"Flatt H, Koch N, Guenter A, Röcker C, Jasperneite J. A Context-Aware Assistance System for Maintenance Applications in Smart Factories based on Augmented Reality and Indoor Localization. In: ETFA 2015. ; 2015.","van":"Flatt H, Koch N, Guenter A, Röcker C, Jasperneite J. A Context-Aware Assistance System for Maintenance Applications in Smart Factories based on Augmented Reality and Indoor Localization. In: ETFA 2015. 2015.","mla":"Flatt, Holger, et al. “A Context-Aware Assistance System for Maintenance Applications in Smart Factories Based on Augmented Reality and Indoor Localization.” ETFA 2015, 2015.","havard":"H. Flatt, N. Koch, A. Guenter, C. Röcker, J. Jasperneite, A Context-Aware Assistance System for Maintenance Applications in Smart Factories based on Augmented Reality and Indoor Localization, in: ETFA 2015, 2015.","bjps":"Flatt H et al. (2015) A Context-Aware Assistance System for Maintenance Applications in Smart Factories Based on Augmented Reality and Indoor Localization. ETFA 2015.","ufg":"Flatt, Holger et. al. (2015): A Context-Aware Assistance System for Maintenance Applications in Smart Factories based on Augmented Reality and Indoor Localization, in: ETFA 2015."},"_id":"4617","language":[{"iso":"eng"}],"date_created":"2021-01-28T10:29:03Z","type":"conference","publication":"ETFA 2015","date_updated":"2023-03-15T13:49:54Z","user_id":"74222"},{"date_created":"2021-01-28T10:30:10Z","type":"conference","publication":"9th International Workshop on Service-Oriented Cyber-Physical Systems in Converging Networked Environments (SOCNE)","date_updated":"2023-03-15T13:49:54Z","user_id":"74222","language":[{"iso":"eng"}],"place":"Luxembourg","_id":"4618","title":"Utilizing OPC UA as comprehensive communication technology for Cyber Physical Production Systems","citation":{"van":"Neumann A, Wisniewski L, Jasperneite J. Utilizing OPC UA as comprehensive communication technology for Cyber Physical Production Systems. In: 9th International Workshop on Service-Oriented Cyber-Physical Systems in Converging Networked Environments (SOCNE). Luxembourg; 2015.","ama":"Neumann A, Wisniewski L, Jasperneite J. Utilizing OPC UA as comprehensive communication technology for Cyber Physical Production Systems. In: 9th International Workshop on Service-Oriented Cyber-Physical Systems in Converging Networked Environments (SOCNE). Luxembourg; 2015.","ufg":"Neumann, Arne et. al. (2015): Utilizing OPC UA as comprehensive communication technology for Cyber Physical Production Systems, in: 9th International Workshop on Service-Oriented Cyber-Physical Systems in Converging Networked Environments (SOCNE), Luxembourg.","mla":"Neumann, Arne, et al. “Utilizing OPC UA as Comprehensive Communication Technology for Cyber Physical Production Systems.” 9th International Workshop on Service-Oriented Cyber-Physical Systems in Converging Networked Environments (SOCNE), 2015.","havard":"A. Neumann, L. Wisniewski, J. Jasperneite, Utilizing OPC UA as comprehensive communication technology for Cyber Physical Production Systems, in: 9th International Workshop on Service-Oriented Cyber-Physical Systems in Converging Networked Environments (SOCNE), Luxembourg, 2015.","bjps":"Neumann A, Wisniewski L and Jasperneite J (2015) Utilizing OPC UA as Comprehensive Communication Technology for Cyber Physical Production Systems. 9th International Workshop on Service-Oriented Cyber-Physical Systems in Converging Networked Environments (SOCNE). Luxembourg.","apa":"Neumann, A., Wisniewski, L., & Jasperneite, J. (2015). Utilizing OPC UA as comprehensive communication technology for Cyber Physical Production Systems. In 9th International Workshop on Service-Oriented Cyber-Physical Systems in Converging Networked Environments (SOCNE). Luxembourg.","ieee":"A. Neumann, L. Wisniewski, and J. Jasperneite, “Utilizing OPC UA as comprehensive communication technology for Cyber Physical Production Systems,” in 9th International Workshop on Service-Oriented Cyber-Physical Systems in Converging Networked Environments (SOCNE), 2015.","chicago":"Neumann, Arne, Lukasz Wisniewski, and Jürgen Jasperneite. “Utilizing OPC UA as Comprehensive Communication Technology for Cyber Physical Production Systems.” In 9th International Workshop on Service-Oriented Cyber-Physical Systems in Converging Networked Environments (SOCNE). Luxembourg, 2015.","short":"A. Neumann, L. Wisniewski, J. Jasperneite, in: 9th International Workshop on Service-Oriented Cyber-Physical Systems in Converging Networked Environments (SOCNE), Luxembourg, 2015.","din1505-2-1":"Neumann, Arne ; Wisniewski, Lukasz ; Jasperneite, Jürgen: Utilizing OPC UA as comprehensive communication technology for Cyber Physical Production Systems. In: 9th International Workshop on Service-Oriented Cyber-Physical Systems in Converging Networked Environments (SOCNE). Luxembourg, 2015","chicago-de":"Neumann, Arne, Lukasz Wisniewski und Jürgen Jasperneite. 2015. Utilizing OPC UA as comprehensive communication technology for Cyber Physical Production Systems. In: 9th International Workshop on Service-Oriented Cyber-Physical Systems in Converging Networked Environments (SOCNE). Luxembourg."},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"last_name":"Neumann","first_name":"Arne","id":"61915","full_name":"Neumann, Arne"},{"id":"1710","last_name":"Wisniewski","first_name":"Lukasz","full_name":"Wisniewski, Lukasz"},{"last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"}],"year":2015,"status":"public"},{"_id":"4619","language":[{"iso":"eng"}],"place":"Luxemburg","date_updated":"2023-03-15T13:49:54Z","user_id":"74222","date_created":"2021-01-28T10:31:02Z","type":"conference","publication":"20th IEEE International Conference on Emerging Technologies and Factory Automation","publisher":"IEEE","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2015,"author":[{"id":"1710","first_name":"Lukasz","last_name":"Wisniewski","full_name":"Wisniewski, Lukasz"},{"first_name":"Markus","last_name":"Schumacher","full_name":"Schumacher, Markus"},{"first_name":"Jürgen","last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen"},{"first_name":"Christian","full_name":"Diedrich, Christian","last_name":"Diedrich"}],"citation":{"apa":"Wisniewski, L., Schumacher, M., Jasperneite, J., & Diedrich, C. (2015). Increasing Flexibility of Time Triggered Ethernet based Systems by Optimal Greedy Scheduling Approach. In 20th IEEE International Conference on Emerging Technologies and Factory Automation. Luxemburg: IEEE.","chicago":"Wisniewski, Lukasz, Markus Schumacher, Jürgen Jasperneite, and Christian Diedrich. “Increasing Flexibility of Time Triggered Ethernet Based Systems by Optimal Greedy Scheduling Approach.” In 20th IEEE International Conference on Emerging Technologies and Factory Automation. Luxemburg: IEEE, 2015.","van":"Wisniewski L, Schumacher M, Jasperneite J, Diedrich C. Increasing Flexibility of Time Triggered Ethernet based Systems by Optimal Greedy Scheduling Approach. In: 20th IEEE International Conference on Emerging Technologies and Factory Automation. Luxemburg: IEEE; 2015.","bjps":"Wisniewski L et al. (2015) Increasing Flexibility of Time Triggered Ethernet Based Systems by Optimal Greedy Scheduling Approach. 20th IEEE International Conference on Emerging Technologies and Factory Automation. Luxemburg: IEEE.","mla":"Wisniewski, Lukasz, et al. “Increasing Flexibility of Time Triggered Ethernet Based Systems by Optimal Greedy Scheduling Approach.” 20th IEEE International Conference on Emerging Technologies and Factory Automation, IEEE, 2015.","havard":"L. Wisniewski, M. Schumacher, J. Jasperneite, C. Diedrich, Increasing Flexibility of Time Triggered Ethernet based Systems by Optimal Greedy Scheduling Approach, in: 20th IEEE International Conference on Emerging Technologies and Factory Automation, IEEE, Luxemburg, 2015.","ufg":"Wisniewski, Lukasz et. al. (2015): Increasing Flexibility of Time Triggered Ethernet based Systems by Optimal Greedy Scheduling Approach, in: 20th IEEE International Conference on Emerging Technologies and Factory Automation, Luxemburg.","short":"L. Wisniewski, M. Schumacher, J. Jasperneite, C. Diedrich, in: 20th IEEE International Conference on Emerging Technologies and Factory Automation, IEEE, Luxemburg, 2015.","din1505-2-1":"Wisniewski, Lukasz ; Schumacher, Markus ; Jasperneite, Jürgen ; Diedrich, Christian: Increasing Flexibility of Time Triggered Ethernet based Systems by Optimal Greedy Scheduling Approach. In: 20th IEEE International Conference on Emerging Technologies and Factory Automation. Luxemburg : IEEE, 2015","chicago-de":"Wisniewski, Lukasz, Markus Schumacher, Jürgen Jasperneite und Christian Diedrich. 2015. Increasing Flexibility of Time Triggered Ethernet based Systems by Optimal Greedy Scheduling Approach. In: 20th IEEE International Conference on Emerging Technologies and Factory Automation. Luxemburg: IEEE.","ieee":"L. Wisniewski, M. Schumacher, J. Jasperneite, and C. Diedrich, “Increasing Flexibility of Time Triggered Ethernet based Systems by Optimal Greedy Scheduling Approach,” in 20th IEEE International Conference on Emerging Technologies and Factory Automation, 2015.","ama":"Wisniewski L, Schumacher M, Jasperneite J, Diedrich C. Increasing Flexibility of Time Triggered Ethernet based Systems by Optimal Greedy Scheduling Approach. In: 20th IEEE International Conference on Emerging Technologies and Factory Automation. Luxemburg: IEEE; 2015."},"title":"Increasing Flexibility of Time Triggered Ethernet based Systems by Optimal Greedy Scheduling Approach"},{"citation":{"chicago":"Windmann, Stefan, and Jürgen Jasperneite. “An FPGA Based FIFO with Efficient Memory Management.” In IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015). Luxembourg, 2015.","apa":"Windmann, S., & Jasperneite, J. (2015). An FPGA Based FIFO with Efficient Memory Management. In IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015). Luxembourg.","ieee":"S. Windmann and J. Jasperneite, “An FPGA Based FIFO with Efficient Memory Management,” in IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015), 2015.","ufg":"Windmann, Stefan/Jasperneite, Jürgen (2015): An FPGA Based FIFO with Efficient Memory Management, in: IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015), Luxembourg.","havard":"S. Windmann, J. Jasperneite, An FPGA Based FIFO with Efficient Memory Management, in: IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015), Luxembourg, 2015.","mla":"Windmann, Stefan, and Jürgen Jasperneite. “An FPGA Based FIFO with Efficient Memory Management.” IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015), 2015.","bjps":"Windmann S and Jasperneite J (2015) An FPGA Based FIFO with Efficient Memory Management. IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015). Luxembourg.","van":"Windmann S, Jasperneite J. An FPGA Based FIFO with Efficient Memory Management. In: IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015). Luxembourg; 2015.","ama":"Windmann S, Jasperneite J. An FPGA Based FIFO with Efficient Memory Management. In: IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015). Luxembourg; 2015.","chicago-de":"Windmann, Stefan und Jürgen Jasperneite. 2015. An FPGA Based FIFO with Efficient Memory Management. In: IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015). Luxembourg.","din1505-2-1":"Windmann, Stefan ; Jasperneite, Jürgen: An FPGA Based FIFO with Efficient Memory Management. In: IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015). Luxembourg, 2015","short":"S. Windmann, J. Jasperneite, in: IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015), Luxembourg, 2015."},"title":"An FPGA Based FIFO with Efficient Memory Management","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"full_name":"Windmann, Stefan","last_name":"Windmann","id":"58525","first_name":"Stefan"},{"first_name":"Jürgen","id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen"}],"year":2015,"date_updated":"2023-03-15T13:49:54Z","user_id":"74222","date_created":"2021-01-28T10:32:01Z","type":"conference","publication":"IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015)","language":[{"iso":"eng"}],"place":"Luxembourg","_id":"4620"},{"date_updated":"2023-03-15T13:49:54Z","user_id":"74222","citation":{"din1505-2-1":"Wisniewski, Lukasz ; Jasperneite, Jürgen ; Diedrich, Christian: Increasing Flexibility of Cyber Physical Systems (CPS) by Optimal Greedy Scheduling of Communication in Time Triggered Ethernet based Networks. In: , 2015","chicago-de":"Wisniewski, Lukasz, Jürgen Jasperneite und Christian Diedrich. 2015. Increasing Flexibility of Cyber Physical Systems (CPS) by Optimal Greedy Scheduling of Communication in Time Triggered Ethernet based Networks. In: .","short":"L. Wisniewski, J. Jasperneite, C. Diedrich, in: 2015.","havard":"L. Wisniewski, J. Jasperneite, C. Diedrich, Increasing Flexibility of Cyber Physical Systems (CPS) by Optimal Greedy Scheduling of Communication in Time Triggered Ethernet based Networks, in: 2015.","bjps":"Wisniewski L, Jasperneite J and Diedrich C (2015) Increasing Flexibility of Cyber Physical Systems (CPS) by Optimal Greedy Scheduling of Communication in Time Triggered Ethernet Based Networks.","mla":"Wisniewski, Lukasz, et al. Increasing Flexibility of Cyber Physical Systems (CPS) by Optimal Greedy Scheduling of Communication in Time Triggered Ethernet Based Networks. 2015.","ufg":"Wisniewski, Lukasz et. al. (2015): Increasing Flexibility of Cyber Physical Systems (CPS) by Optimal Greedy Scheduling of Communication in Time Triggered Ethernet based Networks, in: .","ama":"Wisniewski L, Jasperneite J, Diedrich C. Increasing Flexibility of Cyber Physical Systems (CPS) by Optimal Greedy Scheduling of Communication in Time Triggered Ethernet based Networks. In: ; 2015.","van":"Wisniewski L, Jasperneite J, Diedrich C. Increasing Flexibility of Cyber Physical Systems (CPS) by Optimal Greedy Scheduling of Communication in Time Triggered Ethernet based Networks. In 2015.","chicago":"Wisniewski, Lukasz, Jürgen Jasperneite, and Christian Diedrich. “Increasing Flexibility of Cyber Physical Systems (CPS) by Optimal Greedy Scheduling of Communication in Time Triggered Ethernet Based Networks,” 2015.","ieee":"L. Wisniewski, J. Jasperneite, and C. Diedrich, “Increasing Flexibility of Cyber Physical Systems (CPS) by Optimal Greedy Scheduling of Communication in Time Triggered Ethernet based Networks,” 2015.","apa":"Wisniewski, L., Jasperneite, J., & Diedrich, C. (2015). Increasing Flexibility of Cyber Physical Systems (CPS) by Optimal Greedy Scheduling of Communication in Time Triggered Ethernet based Networks."},"date_created":"2021-01-28T10:33:00Z","type":"conference","title":"Increasing Flexibility of Cyber Physical Systems (CPS) by Optimal Greedy Scheduling of Communication in Time Triggered Ethernet based Networks","language":[{"iso":"eng"}],"status":"public","_id":"4621","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"last_name":"Wisniewski","id":"1710","full_name":"Wisniewski, Lukasz","first_name":"Lukasz"},{"full_name":"Jasperneite, Jürgen","first_name":"Jürgen","last_name":"Jasperneite","id":"1899"},{"first_name":"Christian","last_name":"Diedrich","full_name":"Diedrich, Christian"}],"year":2015},{"user_id":"74222","date_updated":"2023-03-15T13:49:54Z","publication":"13th IEEE International Conference on Industrial Informatics (INDIN 2015)","type":"conference","date_created":"2021-01-28T10:34:29Z","place":"Cambridge, United Kingdom","language":[{"iso":"eng"}],"_id":"4622","citation":{"chicago":"Elattar, Mohammad, Lars Dürkop, and Jürgen Jasperneite. “Utilizing LTE QoS Features to Provide Reliable Access Network for Cyber-Physical Systems.” In 13th IEEE International Conference on Industrial Informatics (INDIN 2015). Cambridge, United Kingdom, 2015.","apa":"Elattar, M., Dürkop, L., & Jasperneite, J. (2015). Utilizing LTE QoS Features to Provide Reliable Access Network for Cyber-Physical Systems. In 13th IEEE International Conference on Industrial Informatics (INDIN 2015). Cambridge, United Kingdom.","ieee":"M. Elattar, L. Dürkop, and J. Jasperneite, “Utilizing LTE QoS Features to Provide Reliable Access Network for Cyber-Physical Systems,” in 13th IEEE International Conference on Industrial Informatics (INDIN 2015), 2015.","ufg":"Elattar, Mohammad et. al. (2015): Utilizing LTE QoS Features to Provide Reliable Access Network for Cyber-Physical Systems, in: 13th IEEE International Conference on Industrial Informatics (INDIN 2015), Cambridge, United Kingdom.","havard":"M. Elattar, L. Dürkop, J. Jasperneite, Utilizing LTE QoS Features to Provide Reliable Access Network for Cyber-Physical Systems, in: 13th IEEE International Conference on Industrial Informatics (INDIN 2015), Cambridge, United Kingdom, 2015.","mla":"Elattar, Mohammad, et al. “Utilizing LTE QoS Features to Provide Reliable Access Network for Cyber-Physical Systems.” 13th IEEE International Conference on Industrial Informatics (INDIN 2015), 2015.","bjps":"Elattar M, Dürkop L and Jasperneite J (2015) Utilizing LTE QoS Features to Provide Reliable Access Network for Cyber-Physical Systems. 13th IEEE International Conference on Industrial Informatics (INDIN 2015). Cambridge, United Kingdom.","van":"Elattar M, Dürkop L, Jasperneite J. Utilizing LTE QoS Features to Provide Reliable Access Network for Cyber-Physical Systems. In: 13th IEEE International Conference on Industrial Informatics (INDIN 2015). Cambridge, United Kingdom; 2015.","ama":"Elattar M, Dürkop L, Jasperneite J. Utilizing LTE QoS Features to Provide Reliable Access Network for Cyber-Physical Systems. In: 13th IEEE International Conference on Industrial Informatics (INDIN 2015). Cambridge, United Kingdom; 2015.","din1505-2-1":"Elattar, Mohammad ; Dürkop, Lars ; Jasperneite, Jürgen: Utilizing LTE QoS Features to Provide Reliable Access Network for Cyber-Physical Systems. In: 13th IEEE International Conference on Industrial Informatics (INDIN 2015). Cambridge, United Kingdom, 2015","chicago-de":"Elattar, Mohammad, Lars Dürkop und Jürgen Jasperneite. 2015. Utilizing LTE QoS Features to Provide Reliable Access Network for Cyber-Physical Systems. In: 13th IEEE International Conference on Industrial Informatics (INDIN 2015). Cambridge, United Kingdom.","short":"M. Elattar, L. Dürkop, J. Jasperneite, in: 13th IEEE International Conference on Industrial Informatics (INDIN 2015), Cambridge, United Kingdom, 2015."},"title":"Utilizing LTE QoS Features to Provide Reliable Access Network for Cyber-Physical Systems","status":"public","author":[{"last_name":"Elattar","first_name":"Mohammad","id":"58263","full_name":"Elattar, Mohammad"},{"full_name":"Dürkop, Lars","last_name":"Dürkop","first_name":"Lars"},{"id":"1899","last_name":"Jasperneite","first_name":"Jürgen","full_name":"Jasperneite, Jürgen"}],"year":2015,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}]},{"author":[{"full_name":"Heymann, Sascha","first_name":"Sascha","last_name":"Heymann"},{"first_name":"Jürgen","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","id":"1899"},{"full_name":"Schröck, Sebastian","first_name":"Sebastian","last_name":"Schröck"},{"last_name":"Fay","full_name":"Fay, Alexander","first_name":"Alexander"}],"year":2015,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public","title":"Beschreibung von Produktionsprozessen in modularisierten Produktionsanlagen für Industrie 4.0","citation":{"ama":"Heymann S, Jasperneite J, Schröck S, Fay A. Beschreibung von Produktionsprozessen in modularisierten Produktionsanlagen für Industrie 4.0. In: Automation 2015. Baden-Baden; 2015.","ieee":"S. Heymann, J. Jasperneite, S. Schröck, and A. Fay, “Beschreibung von Produktionsprozessen in modularisierten Produktionsanlagen für Industrie 4.0,” in Automation 2015, 2015.","short":"S. Heymann, J. Jasperneite, S. Schröck, A. Fay, in: Automation 2015, Baden-Baden, 2015.","din1505-2-1":"Heymann, Sascha ; Jasperneite, Jürgen ; Schröck, Sebastian ; Fay, Alexander: Beschreibung von Produktionsprozessen in modularisierten Produktionsanlagen für Industrie 4.0. In: Automation 2015. Baden-Baden, 2015","chicago-de":"Heymann, Sascha, Jürgen Jasperneite, Sebastian Schröck und Alexander Fay. 2015. Beschreibung von Produktionsprozessen in modularisierten Produktionsanlagen für Industrie 4.0. In: Automation 2015. Baden-Baden.","van":"Heymann S, Jasperneite J, Schröck S, Fay A. Beschreibung von Produktionsprozessen in modularisierten Produktionsanlagen für Industrie 4.0. In: Automation 2015. Baden-Baden; 2015.","mla":"Heymann, Sascha, et al. “Beschreibung von Produktionsprozessen in Modularisierten Produktionsanlagen Für Industrie 4.0.” Automation 2015, 2015.","bjps":"Heymann S et al. (2015) Beschreibung von Produktionsprozessen in Modularisierten Produktionsanlagen Für Industrie 4.0. Automation 2015. Baden-Baden.","havard":"S. Heymann, J. Jasperneite, S. Schröck, A. Fay, Beschreibung von Produktionsprozessen in modularisierten Produktionsanlagen für Industrie 4.0, in: Automation 2015, Baden-Baden, 2015.","ufg":"Heymann, Sascha et. al. (2015): Beschreibung von Produktionsprozessen in modularisierten Produktionsanlagen für Industrie 4.0, in: Automation 2015, Baden-Baden.","apa":"Heymann, S., Jasperneite, J., Schröck, S., & Fay, A. (2015). Beschreibung von Produktionsprozessen in modularisierten Produktionsanlagen für Industrie 4.0. In Automation 2015. Baden-Baden.","chicago":"Heymann, Sascha, Jürgen Jasperneite, Sebastian Schröck, and Alexander Fay. “Beschreibung von Produktionsprozessen in Modularisierten Produktionsanlagen Für Industrie 4.0.” In Automation 2015. Baden-Baden, 2015."},"_id":"4623","place":"Baden-Baden","language":[{"iso":"eng"}],"publication":"Automation 2015","type":"conference","date_created":"2021-01-28T10:35:40Z","user_id":"74222","date_updated":"2023-03-15T13:49:54Z"},{"date_created":"2021-01-28T10:36:57Z","type":"conference","publication":"22. ERP-Tage (Vortrag)","date_updated":"2023-03-15T13:49:54Z","user_id":"74222","language":[{"iso":"eng"}],"place":"Aachen","_id":"4624","title":"Wie die Intelligenz in die Maschine kommt!","citation":{"din1505-2-1":"Jasperneite, Jürgen: Wie die Intelligenz in die Maschine kommt! In: 22. ERP-Tage (Vortrag). Aachen, 2015","chicago-de":"Jasperneite, Jürgen. 2015. Wie die Intelligenz in die Maschine kommt! In: 22. ERP-Tage (Vortrag). Aachen.","short":"J. Jasperneite, in: 22. ERP-Tage (Vortrag), Aachen, 2015.","ufg":"Jasperneite, Jürgen (2015): Wie die Intelligenz in die Maschine kommt!, in: 22. ERP-Tage (Vortrag), Aachen.","mla":"Jasperneite, Jürgen. “Wie Die Intelligenz in Die Maschine Kommt!” 22. ERP-Tage (Vortrag), 2015.","havard":"J. Jasperneite, Wie die Intelligenz in die Maschine kommt!, in: 22. ERP-Tage (Vortrag), Aachen, 2015.","bjps":"Jasperneite J (2015) Wie Die Intelligenz in Die Maschine Kommt! 22. ERP-Tage (Vortrag). Aachen.","van":"Jasperneite J. Wie die Intelligenz in die Maschine kommt! In: 22 ERP-Tage (Vortrag). Aachen; 2015.","chicago":"Jasperneite, Jürgen. “Wie Die Intelligenz in Die Maschine Kommt!” In 22. ERP-Tage (Vortrag). Aachen, 2015.","apa":"Jasperneite, J. (2015). Wie die Intelligenz in die Maschine kommt! In 22. ERP-Tage (Vortrag). Aachen.","ama":"Jasperneite J. Wie die Intelligenz in die Maschine kommt! In: 22. ERP-Tage (Vortrag). Aachen; 2015.","ieee":"J. Jasperneite, “Wie die Intelligenz in die Maschine kommt!,” in 22. ERP-Tage (Vortrag), 2015."},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","id":"1899","first_name":"Jürgen"}],"year":2015,"status":"public"},{"title":"OPC UA versus MTConnect","volume":"Sonderheft S2 2015 ControlDrives","citation":{"short":"J. Jasperneite, A. Neumann, F. Pethig, ComputerAutomation Sonderheft S2 2015 ControlDrives (2015) 16–21.","din1505-2-1":"Jasperneite, Jürgen ; Neumann, Arne ; Pethig, Florian: OPC UA versus MTConnect. In: ComputerAutomation Bd. Sonderheft S2 2015 ControlDrives (2015), S. 16–21","chicago-de":"Jasperneite, Jürgen, Arne Neumann und Florian Pethig. 2015. OPC UA versus MTConnect. ComputerAutomation Sonderheft S2 2015 ControlDrives: 16–21.","van":"Jasperneite J, Neumann A, Pethig F. OPC UA versus MTConnect. ComputerAutomation . 2015;Sonderheft S2 2015 ControlDrives:16–21.","ama":"Jasperneite J, Neumann A, Pethig F. OPC UA versus MTConnect. ComputerAutomation . 2015;Sonderheft S2 2015 ControlDrives:16-21.","ufg":"Jasperneite, Jürgen et. al. (2015): OPC UA versus MTConnect, in: ComputerAutomation Sonderheft S2 2015 ControlDrives, S. 16–21.","mla":"Jasperneite, Jürgen, et al. “OPC UA versus MTConnect.” ComputerAutomation , vol. Sonderheft S2 2015 ControlDrives, 2015, pp. 16–21.","havard":"J. Jasperneite, A. Neumann, F. Pethig, OPC UA versus MTConnect, ComputerAutomation . Sonderheft S2 2015 ControlDrives (2015) 16–21.","bjps":"Jasperneite J, Neumann A and Pethig F (2015) OPC UA versus MTConnect. ComputerAutomation Sonderheft S2 2015 ControlDrives, 16–21.","apa":"Jasperneite, J., Neumann, A., & Pethig, F. (2015). OPC UA versus MTConnect. ComputerAutomation , Sonderheft S2 2015 ControlDrives, 16–21.","ieee":"J. Jasperneite, A. Neumann, and F. Pethig, “OPC UA versus MTConnect,” ComputerAutomation , vol. Sonderheft S2 2015 ControlDrives, pp. 16–21, 2015.","chicago":"Jasperneite, Jürgen, Arne Neumann, and Florian Pethig. “OPC UA versus MTConnect.” ComputerAutomation Sonderheft S2 2015 ControlDrives (2015): 16–21."},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2015,"author":[{"full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","first_name":"Jürgen","id":"1899"},{"full_name":"Neumann, Arne","id":"61915","last_name":"Neumann","first_name":"Arne"},{"full_name":"Pethig, Florian","last_name":"Pethig","first_name":"Florian"}],"page":"16-21","status":"public","date_created":"2021-01-28T10:37:36Z","type":"journal_article","publication":"ComputerAutomation ","date_updated":"2023-03-15T13:49:54Z","user_id":"74222","_id":"4625","language":[{"iso":"eng"}]},{"place":"Palma de Mallorca, Spain","language":[{"iso":"eng"}],"_id":"4627","publication":"11th IEEE World Conference on Factory Communication Systems (WFCS 2015)","date_created":"2021-01-28T10:39:49Z","type":"conference","user_id":"74222","date_updated":"2023-03-15T13:49:54Z","year":2015,"author":[{"id":"1710","full_name":"Wisniewski, Lukasz","last_name":"Wisniewski","first_name":"Lukasz"},{"last_name":"Chahar","first_name":"Satendrasingh Y","full_name":"Chahar, Satendrasingh Y"},{"full_name":"Jasperneite, Jürgen","first_name":"Jürgen","last_name":"Jasperneite","id":"1899"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public","publisher":"IEEE","title":"Seamless reconfiguration of Time Triggered Ethernet protocols","citation":{"ama":"Wisniewski L, Chahar SY, Jasperneite J. Seamless reconfiguration of Time Triggered Ethernet protocols. In: 11th IEEE World Conference on Factory Communication Systems (WFCS 2015). Palma de Mallorca, Spain: IEEE; 2015.","ieee":"L. Wisniewski, S. Y. Chahar, and J. Jasperneite, “Seamless reconfiguration of Time Triggered Ethernet protocols,” in 11th IEEE World Conference on Factory Communication Systems (WFCS 2015), 2015.","short":"L. Wisniewski, S.Y. Chahar, J. Jasperneite, in: 11th IEEE World Conference on Factory Communication Systems (WFCS 2015), IEEE, Palma de Mallorca, Spain, 2015.","chicago-de":"Wisniewski, Lukasz, Satendrasingh Y Chahar und Jürgen Jasperneite. 2015. Seamless reconfiguration of Time Triggered Ethernet protocols. In: 11th IEEE World Conference on Factory Communication Systems (WFCS 2015). Palma de Mallorca, Spain: IEEE.","din1505-2-1":"Wisniewski, Lukasz ; Chahar, Satendrasingh Y ; Jasperneite, Jürgen: Seamless reconfiguration of Time Triggered Ethernet protocols. In: 11th IEEE World Conference on Factory Communication Systems (WFCS 2015). Palma de Mallorca, Spain : IEEE, 2015","van":"Wisniewski L, Chahar SY, Jasperneite J. Seamless reconfiguration of Time Triggered Ethernet protocols. In: 11th IEEE World Conference on Factory Communication Systems (WFCS 2015). Palma de Mallorca, Spain: IEEE; 2015.","ufg":"Wisniewski, Lukasz et. al. (2015): Seamless reconfiguration of Time Triggered Ethernet protocols, in: 11th IEEE World Conference on Factory Communication Systems (WFCS 2015), Palma de Mallorca, Spain.","mla":"Wisniewski, Lukasz, et al. “Seamless Reconfiguration of Time Triggered Ethernet Protocols.” 11th IEEE World Conference on Factory Communication Systems (WFCS 2015), IEEE, 2015.","bjps":"Wisniewski L, Chahar SY and Jasperneite J (2015) Seamless Reconfiguration of Time Triggered Ethernet Protocols. 11th IEEE World Conference on Factory Communication Systems (WFCS 2015). Palma de Mallorca, Spain: IEEE.","havard":"L. Wisniewski, S.Y. Chahar, J. Jasperneite, Seamless reconfiguration of Time Triggered Ethernet protocols, in: 11th IEEE World Conference on Factory Communication Systems (WFCS 2015), IEEE, Palma de Mallorca, Spain, 2015.","apa":"Wisniewski, L., Chahar, S. Y., & Jasperneite, J. (2015). Seamless reconfiguration of Time Triggered Ethernet protocols. In 11th IEEE World Conference on Factory Communication Systems (WFCS 2015). Palma de Mallorca, Spain: IEEE.","chicago":"Wisniewski, Lukasz, Satendrasingh Y Chahar, and Jürgen Jasperneite. “Seamless Reconfiguration of Time Triggered Ethernet Protocols.” In 11th IEEE World Conference on Factory Communication Systems (WFCS 2015). Palma de Mallorca, Spain: IEEE, 2015."}},{"citation":{"ama":"Elattar M, Jasperneite J. Using LTE as an Access Network for Internet-Based Cyber-Physical Systems. In: 11th IEEE World Conference on Factory Communication Systems (WFCS 2015). Palma de Mallorca; 2015.","ieee":"M. Elattar and J. Jasperneite, “Using LTE as an Access Network for Internet-Based Cyber-Physical Systems,” in 11th IEEE World Conference on Factory Communication Systems (WFCS 2015), 2015.","ufg":"Elattar, Mohammad/Jasperneite, Jürgen (2015): Using LTE as an Access Network for Internet-Based Cyber-Physical Systems, in: 11th IEEE World Conference on Factory Communication Systems (WFCS 2015), Palma de Mallorca.","mla":"Elattar, Mohammad, and Jürgen Jasperneite. “Using LTE as an Access Network for Internet-Based Cyber-Physical Systems.” 11th IEEE World Conference on Factory Communication Systems (WFCS 2015), 2015.","havard":"M. Elattar, J. Jasperneite, Using LTE as an Access Network for Internet-Based Cyber-Physical Systems, in: 11th IEEE World Conference on Factory Communication Systems (WFCS 2015), Palma de Mallorca, 2015.","bjps":"Elattar M and Jasperneite J (2015) Using LTE as an Access Network for Internet-Based Cyber-Physical Systems. 11th IEEE World Conference on Factory Communication Systems (WFCS 2015). Palma de Mallorca.","van":"Elattar M, Jasperneite J. Using LTE as an Access Network for Internet-Based Cyber-Physical Systems. In: 11th IEEE World Conference on Factory Communication Systems (WFCS 2015). Palma de Mallorca; 2015.","chicago":"Elattar, Mohammad, and Jürgen Jasperneite. “Using LTE as an Access Network for Internet-Based Cyber-Physical Systems.” In 11th IEEE World Conference on Factory Communication Systems (WFCS 2015). Palma de Mallorca, 2015.","apa":"Elattar, M., & Jasperneite, J. (2015). Using LTE as an Access Network for Internet-Based Cyber-Physical Systems. In 11th IEEE World Conference on Factory Communication Systems (WFCS 2015). Palma de Mallorca.","din1505-2-1":"Elattar, Mohammad ; Jasperneite, Jürgen: Using LTE as an Access Network for Internet-Based Cyber-Physical Systems. In: 11th IEEE World Conference on Factory Communication Systems (WFCS 2015). Palma de Mallorca, 2015","chicago-de":"Elattar, Mohammad und Jürgen Jasperneite. 2015. Using LTE as an Access Network for Internet-Based Cyber-Physical Systems. In: 11th IEEE World Conference on Factory Communication Systems (WFCS 2015). Palma de Mallorca.","short":"M. Elattar, J. Jasperneite, in: 11th IEEE World Conference on Factory Communication Systems (WFCS 2015), Palma de Mallorca, 2015."},"title":"Using LTE as an Access Network for Internet-Based Cyber-Physical Systems","status":"public","year":2015,"author":[{"id":"58263","first_name":"Mohammad","full_name":"Elattar, Mohammad","last_name":"Elattar"},{"full_name":"Jasperneite, Jürgen","first_name":"Jürgen","last_name":"Jasperneite","id":"1899"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"user_id":"74222","date_updated":"2023-03-15T13:49:54Z","publication":"11th IEEE World Conference on Factory Communication Systems (WFCS 2015)","type":"conference","date_created":"2021-01-28T10:40:35Z","place":"Palma de Mallorca","language":[{"iso":"eng"}],"_id":"4628"},{"date_created":"2021-01-28T10:41:22Z","type":"conference","publication":"Produktivitätsfortschritte durch Industrie 4.0","date_updated":"2023-03-15T13:49:54Z","user_id":"74222","language":[{"iso":"eng"}],"place":"Frankfurt","_id":"4629","title":"Wenn Assistenzsysteme den Menschen unterstützen und entlasten","citation":{"ama":"Jasperneite J. Wenn Assistenzsysteme den Menschen unterstützen und entlasten. In: Produktivitätsfortschritte Durch Industrie 4.0. Frankfurt: VDMA-Verlag GmbH; 2015:8-9.","ieee":"J. Jasperneite, “Wenn Assistenzsysteme den Menschen unterstützen und entlasten,” in Produktivitätsfortschritte durch Industrie 4.0, 2015, pp. 8–9.","short":"J. Jasperneite, in: Produktivitätsfortschritte Durch Industrie 4.0, VDMA-Verlag GmbH, Frankfurt, 2015, pp. 8–9.","chicago-de":"Jasperneite, Jürgen. 2015. Wenn Assistenzsysteme den Menschen unterstützen und entlasten. In: Produktivitätsfortschritte durch Industrie 4.0, 8–9. Frankfurt: VDMA-Verlag GmbH.","din1505-2-1":"Jasperneite, Jürgen: Wenn Assistenzsysteme den Menschen unterstützen und entlasten. In: Produktivitätsfortschritte durch Industrie 4.0. Frankfurt : VDMA-Verlag GmbH, 2015, S. 8–9","van":"Jasperneite J. Wenn Assistenzsysteme den Menschen unterstützen und entlasten. In: Produktivitätsfortschritte durch Industrie 40. Frankfurt: VDMA-Verlag GmbH; 2015. p. 8–9.","mla":"Jasperneite, Jürgen. “Wenn Assistenzsysteme Den Menschen Unterstützen Und Entlasten.” Produktivitätsfortschritte Durch Industrie 4.0, VDMA-Verlag GmbH, 2015, pp. 8–9.","havard":"J. Jasperneite, Wenn Assistenzsysteme den Menschen unterstützen und entlasten, in: Produktivitätsfortschritte Durch Industrie 4.0, VDMA-Verlag GmbH, Frankfurt, 2015: pp. 8–9.","bjps":"Jasperneite J (2015) Wenn Assistenzsysteme Den Menschen Unterstützen Und Entlasten. Produktivitätsfortschritte Durch Industrie 4.0. Frankfurt: VDMA-Verlag GmbH, pp. 8–9.","ufg":"Jasperneite, Jürgen (2015): Wenn Assistenzsysteme den Menschen unterstützen und entlasten, in: Produktivitätsfortschritte durch Industrie 4.0, Frankfurt, S. 8–9.","apa":"Jasperneite, J. (2015). Wenn Assistenzsysteme den Menschen unterstützen und entlasten. In Produktivitätsfortschritte durch Industrie 4.0 (pp. 8–9). Frankfurt: VDMA-Verlag GmbH.","chicago":"Jasperneite, Jürgen. “Wenn Assistenzsysteme Den Menschen Unterstützen Und Entlasten.” In Produktivitätsfortschritte Durch Industrie 4.0, 8–9. Frankfurt: VDMA-Verlag GmbH, 2015."},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"id":"1899","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","first_name":"Jürgen"}],"year":2015,"page":"8-9","status":"public","publisher":"VDMA-Verlag GmbH"},{"date_updated":"2023-03-15T13:49:54Z","user_id":"74222","date_created":"2021-01-28T10:43:18Z","type":"conference","publication":"20. Industrial Communication Congress (Vortrag)","_id":"4631","language":[{"iso":"eng"}],"place":"Bad Pyrmont","citation":{"short":"J. Jasperneite, in: 20. Industrial Communication Congress (Vortrag), Bad Pyrmont, 2015.","din1505-2-1":"Jasperneite, Jürgen: Industrie 4.0 und intelligente Vernetzung - Technologietransfer am Beispiel eines it´s OWL Projektes. In: 20. Industrial Communication Congress (Vortrag). Bad Pyrmont, 2015","chicago-de":"Jasperneite, Jürgen. 2015. Industrie 4.0 und intelligente Vernetzung - Technologietransfer am Beispiel eines it´s OWL Projektes. In: 20. Industrial Communication Congress (Vortrag). Bad Pyrmont.","apa":"Jasperneite, J. (2015). Industrie 4.0 und intelligente Vernetzung - Technologietransfer am Beispiel eines it´s OWL Projektes. In 20. Industrial Communication Congress (Vortrag). Bad Pyrmont.","chicago":"Jasperneite, Jürgen. “Industrie 4.0 Und Intelligente Vernetzung - Technologietransfer Am Beispiel Eines It´s OWL Projektes.” In 20. Industrial Communication Congress (Vortrag). Bad Pyrmont, 2015.","van":"Jasperneite J. Industrie 4.0 und intelligente Vernetzung - Technologietransfer am Beispiel eines it´s OWL Projektes. In: 20 Industrial Communication Congress (Vortrag). Bad Pyrmont; 2015.","ufg":"Jasperneite, Jürgen (2015): Industrie 4.0 und intelligente Vernetzung - Technologietransfer am Beispiel eines it´s OWL Projektes, in: 20. Industrial Communication Congress (Vortrag), Bad Pyrmont.","bjps":"Jasperneite J (2015) Industrie 4.0 Und Intelligente Vernetzung - Technologietransfer Am Beispiel Eines It´s OWL Projektes. 20. Industrial Communication Congress (Vortrag). Bad Pyrmont.","mla":"Jasperneite, Jürgen. “Industrie 4.0 Und Intelligente Vernetzung - Technologietransfer Am Beispiel Eines It´s OWL Projektes.” 20. Industrial Communication Congress (Vortrag), 2015.","havard":"J. Jasperneite, Industrie 4.0 und intelligente Vernetzung - Technologietransfer am Beispiel eines it´s OWL Projektes, in: 20. Industrial Communication Congress (Vortrag), Bad Pyrmont, 2015.","ieee":"J. Jasperneite, “Industrie 4.0 und intelligente Vernetzung - Technologietransfer am Beispiel eines it´s OWL Projektes,” in 20. Industrial Communication Congress (Vortrag), 2015.","ama":"Jasperneite J. Industrie 4.0 und intelligente Vernetzung - Technologietransfer am Beispiel eines it´s OWL Projektes. In: 20. Industrial Communication Congress (Vortrag). Bad Pyrmont; 2015."},"title":"Industrie 4.0 und intelligente Vernetzung - Technologietransfer am Beispiel eines it´s OWL Projektes","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"last_name":"Jasperneite","first_name":"Jürgen","full_name":"Jasperneite, Jürgen"}],"year":2015},{"date_updated":"2023-03-15T13:49:54Z","user_id":"74222","type":"conference","date_created":"2021-01-28T10:58:06Z","publication":"18th International Conference on Intelligence in Next Generation Networks (ICIN), Paris","language":[{"iso":"eng"}],"_id":"4633","citation":{"ieee":"L. Dürkop, B. Czybik, and J. Jasperneite, “Performance Evaluation of M2M Protocols Over Cellular Networks in a Lab Environment,” in 18th International Conference on Intelligence in Next Generation Networks (ICIN), Paris, 2015.","ama":"Dürkop L, Czybik B, Jasperneite J. Performance Evaluation of M2M Protocols Over Cellular Networks in a Lab Environment. In: 18th International Conference on Intelligence in Next Generation Networks (ICIN), Paris. ; 2015.","apa":"Dürkop, L., Czybik, B., & Jasperneite, J. (2015). Performance Evaluation of M2M Protocols Over Cellular Networks in a Lab Environment. In 18th International Conference on Intelligence in Next Generation Networks (ICIN), Paris.","chicago":"Dürkop, Lars, Björn Czybik, and Jürgen Jasperneite. “Performance Evaluation of M2M Protocols Over Cellular Networks in a Lab Environment.” In 18th International Conference on Intelligence in Next Generation Networks (ICIN), Paris, 2015.","van":"Dürkop L, Czybik B, Jasperneite J. Performance Evaluation of M2M Protocols Over Cellular Networks in a Lab Environment. In: 18th International Conference on Intelligence in Next Generation Networks (ICIN), Paris. 2015.","havard":"L. Dürkop, B. Czybik, J. Jasperneite, Performance Evaluation of M2M Protocols Over Cellular Networks in a Lab Environment, in: 18th International Conference on Intelligence in Next Generation Networks (ICIN), Paris, 2015.","mla":"Dürkop, Lars, et al. “Performance Evaluation of M2M Protocols Over Cellular Networks in a Lab Environment.” 18th International Conference on Intelligence in Next Generation Networks (ICIN), Paris, 2015.","bjps":"Dürkop L, Czybik B and Jasperneite J (2015) Performance Evaluation of M2M Protocols Over Cellular Networks in a Lab Environment. 18th International Conference on Intelligence in Next Generation Networks (ICIN), Paris.","ufg":"Dürkop, Lars et. al. (2015): Performance Evaluation of M2M Protocols Over Cellular Networks in a Lab Environment, in: 18th International Conference on Intelligence in Next Generation Networks (ICIN), Paris.","short":"L. Dürkop, B. Czybik, J. Jasperneite, in: 18th International Conference on Intelligence in Next Generation Networks (ICIN), Paris, 2015.","chicago-de":"Dürkop, Lars, Björn Czybik und Jürgen Jasperneite. 2015. Performance Evaluation of M2M Protocols Over Cellular Networks in a Lab Environment. In: 18th International Conference on Intelligence in Next Generation Networks (ICIN), Paris.","din1505-2-1":"Dürkop, Lars ; Czybik, Björn ; Jasperneite, Jürgen: Performance Evaluation of M2M Protocols Over Cellular Networks in a Lab Environment. In: 18th International Conference on Intelligence in Next Generation Networks (ICIN), Paris, 2015"},"title":"Performance Evaluation of M2M Protocols Over Cellular Networks in a Lab Environment","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"full_name":"Dürkop, Lars","first_name":"Lars","last_name":"Dürkop"},{"first_name":"Björn","id":"76180","last_name":"Czybik","full_name":"Czybik, Björn"},{"full_name":"Jasperneite, Jürgen","id":"1899","last_name":"Jasperneite","first_name":"Jürgen"}],"year":2015},{"date_updated":"2023-03-15T13:49:54Z","user_id":"74222","type":"conference","date_created":"2021-01-28T10:58:59Z","publication":"Ligna Preview 2015","language":[{"iso":"eng"}],"place":"Hannover (Vortrag)","_id":"4634","citation":{"ufg":"Jasperneite, Jürgen (2015): How Machines will become intelligent?, in: Ligna Preview 2015, Hannover (Vortrag).","bjps":"Jasperneite J (2015) How Machines Will Become Intelligent? Ligna Preview 2015. Hannover (Vortrag).","mla":"Jasperneite, Jürgen. “How Machines Will Become Intelligent?” Ligna Preview 2015, 2015.","havard":"J. Jasperneite, How Machines will become intelligent?, in: Ligna Preview 2015, Hannover (Vortrag), 2015.","van":"Jasperneite J. How Machines will become intelligent? In: Ligna Preview 2015. Hannover (Vortrag); 2015.","chicago":"Jasperneite, Jürgen. “How Machines Will Become Intelligent?” In Ligna Preview 2015. Hannover (Vortrag), 2015.","apa":"Jasperneite, J. (2015). How Machines will become intelligent? In Ligna Preview 2015. Hannover (Vortrag).","chicago-de":"Jasperneite, Jürgen. 2015. How Machines will become intelligent? In: Ligna Preview 2015. Hannover (Vortrag).","din1505-2-1":"Jasperneite, Jürgen: How Machines will become intelligent? In: Ligna Preview 2015. Hannover (Vortrag), 2015","short":"J. Jasperneite, in: Ligna Preview 2015, Hannover (Vortrag), 2015.","ama":"Jasperneite J. How Machines will become intelligent? In: Ligna Preview 2015. Hannover (Vortrag); 2015.","ieee":"J. Jasperneite, “How Machines will become intelligent?,” in Ligna Preview 2015, 2015."},"title":"How Machines will become intelligent?","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2015,"author":[{"id":"1899","first_name":"Jürgen","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite"}]},{"year":"2015","department":[{"_id":"DEP1000"},{"_id":"DEP1055"}],"conference":{"location":"Detmold","name":" Facade 2015 - computational optimisation. Nov. 29th : ConstructionLab ","start_date":"2015-11-27","end_date":"2015-11-27"},"status":"public","publisher":" Hochschule OWL ","title":" Facade 2015 - computational optimisation. Nov. 29th : ConstructionLab ","citation":{"bjps":"Pottgiesser U, Hemmerling M and Böke J (eds) (2015) Facade 2015 - Computational Optimisation. Nov. 29th : ConstructionLab . Detmold: Hochschule OWL .","havard":"U. Pottgiesser, M. Hemmerling, J. Böke, eds., Facade 2015 - computational optimisation. Nov. 29th : ConstructionLab , Hochschule OWL , Detmold, 2015.","mla":"Pottgiesser, Uta, et al., editors. Facade 2015 - Computational Optimisation. Nov. 29th : ConstructionLab . Hochschule OWL , 2015.","ufg":"Pottgiesser, Uta/Hemmerling, Marco/Böke, Jens: Facade 2015 - computational optimisation. Nov. 29th : ConstructionLab , Bd. 1, Detmold 2015.","van":"Pottgiesser U, Hemmerling M, Böke J, editors. Facade 2015 - computational optimisation. Nov. 29th : ConstructionLab . Vol. 1. Detmold: Hochschule OWL ; 2015.","chicago":"Pottgiesser, Uta, Marco Hemmerling, and Jens Böke, eds. Facade 2015 - Computational Optimisation. Nov. 29th : ConstructionLab . Vol. 1. Detmold: Hochschule OWL , 2015.","apa":"Pottgiesser, U., Hemmerling, M., & Böke, J. (Eds.). (2015). Facade 2015 - computational optimisation. Nov. 29th : ConstructionLab (Vol. 1). Hochschule OWL .","chicago-de":"Pottgiesser, Uta, Marco Hemmerling und Jens Böke, Hrsg. 2015. Facade 2015 - computational optimisation. Nov. 29th : ConstructionLab . Bd. 1. Detmold: Hochschule OWL .","din1505-2-1":"Pottgiesser, U. ; Hemmerling, M. ; Böke, J. (Hrsg.): Facade 2015 - computational optimisation. Nov. 29th : ConstructionLab . Bd. 1. Detmold : Hochschule OWL , 2015","short":"U. Pottgiesser, M. Hemmerling, J. Böke, eds., Facade 2015 - Computational Optimisation. Nov. 29th : ConstructionLab , Hochschule OWL , Detmold, 2015.","ama":"Pottgiesser U, Hemmerling M, Böke J, eds. Facade 2015 - Computational Optimisation. Nov. 29th : ConstructionLab . Vol 1. Hochschule OWL ; 2015.","ieee":"U. Pottgiesser, M. Hemmerling, and J. Böke, Eds., Facade 2015 - computational optimisation. Nov. 29th : ConstructionLab , vol. 1. Detmold: Hochschule OWL , 2015."},"volume":1,"publication_status":"published","place":"Detmold","language":[{"iso":"eng"}],"_id":"9649","publication_identifier":{"isbn":[" 978-3-939349-23-5 "]},"type":"conference_editor","date_created":"2023-03-23T07:49:47Z","user_id":"45673","date_updated":"2023-04-05T09:12:34Z","related_material":{"link":[{"relation":"other","url":"https://www.th-owl.de/gestaltung/forschung/constructionlab/wissenstransfer/veranstaltungen/facade2015/"}]},"intvolume":" 1","editor":[{"orcid":"0000-0002-8594-3168","id":"27166","full_name":"Pottgiesser, Uta","last_name":"Pottgiesser","first_name":"Uta"},{"full_name":"Hemmerling, Marco","id":"27359","first_name":"Marco","last_name":"Hemmerling"},{"full_name":"Böke, Jens","first_name":"Jens","last_name":"Böke"}]},{"intvolume":" 2014","user_id":"83779","date_updated":"2024-05-24T06:29:42Z","publication_identifier":{"isbn":["978-3-418-00847-9"]},"publication":" Brewing science","type":"journal_article","date_created":"2020-06-02T10:22:13Z","_id":"2747","language":[{"iso":"ger"}],"citation":{"ieee":"A. Dammann, K. Schwarzer, U. Müller, and J. Schneider, “Evaluation of the Acidic Sucrose Hydrolysis as Time-Temperature Integrator in Flash Pasteurizers,” Brewing science, vol. 2014, no. Yearbook, pp. 10–17, 2015.","ama":"Dammann A, Schwarzer K, Müller U, Schneider J. Evaluation of the Acidic Sucrose Hydrolysis as Time-Temperature Integrator in Flash Pasteurizers. Brewing science. 2015;2014(Yearbook):10-17.","chicago":"Dammann, Anna, Knut Schwarzer, Ulrich Müller, and Jan Schneider. “Evaluation of the Acidic Sucrose Hydrolysis as Time-Temperature Integrator in Flash Pasteurizers.” Brewing science 2014, no. Yearbook (2015): 10–17.","apa":"Dammann, A., Schwarzer, K., Müller, U., & Schneider, J. (2015). Evaluation of the Acidic Sucrose Hydrolysis as Time-Temperature Integrator in Flash Pasteurizers. Brewing science, 2014(Yearbook), 10–17.","havard":"A. Dammann, K. Schwarzer, U. Müller, J. Schneider, Evaluation of the Acidic Sucrose Hydrolysis as Time-Temperature Integrator in Flash Pasteurizers, Brewing science. 2014 (2015) 10–17.","bjps":"Dammann A et al. (2015) Evaluation of the Acidic Sucrose Hydrolysis as Time-Temperature Integrator in Flash Pasteurizers. Brewing science 2014, 10–17.","mla":"Dammann, Anna, et al. “Evaluation of the Acidic Sucrose Hydrolysis as Time-Temperature Integrator in Flash Pasteurizers.” Brewing science, vol. 2014, no. Yearbook, 2015, pp. 10–17.","ufg":"Dammann, Anna u. a.: Evaluation of the Acidic Sucrose Hydrolysis as Time-Temperature Integrator in Flash Pasteurizers, in: Brewing science 2014 (2015), H. Yearbook, S. 10–17.","van":"Dammann A, Schwarzer K, Müller U, Schneider J. Evaluation of the Acidic Sucrose Hydrolysis as Time-Temperature Integrator in Flash Pasteurizers. Brewing science. 2015;2014(Yearbook):10–7.","din1505-2-1":"Dammann, Anna ; Schwarzer, Knut ; Müller, Ulrich ; Schneider, Jan: Evaluation of the Acidic Sucrose Hydrolysis as Time-Temperature Integrator in Flash Pasteurizers. In: Brewing science Bd. 2014 (2015), Nr. Yearbook, S. 10–17","chicago-de":"Dammann, Anna, Knut Schwarzer, Ulrich Müller und Jan Schneider. 2015. Evaluation of the Acidic Sucrose Hydrolysis as Time-Temperature Integrator in Flash Pasteurizers. Brewing science 2014, Nr. Yearbook: 10–17.","short":"A. Dammann, K. Schwarzer, U. Müller, J. Schneider, Brewing science 2014 (2015) 10–17."},"volume":2014,"publication_status":"published","title":"Evaluation of the Acidic Sucrose Hydrolysis as Time-Temperature Integrator in Flash Pasteurizers","status":"public","page":"10 - 17","issue":"Yearbook","author":[{"full_name":"Dammann, Anna","last_name":"Dammann","first_name":"Anna"},{"first_name":"Knut","id":"13329","full_name":"Schwarzer, Knut","last_name":"Schwarzer"},{"first_name":"Ulrich","id":"12119","full_name":"Müller, Ulrich","last_name":"Müller"},{"first_name":"Jan","id":"13209","last_name":"Schneider","full_name":"Schneider, Jan","orcid":"0000-0001-6401-8873"}],"year":"2015","department":[{"_id":"DEP4009"},{"_id":"DEP4023"},{"_id":"DEP4018"}]},{"citation":{"ufg":"Broeker, Timo u. a.: BioCO2nvert - Synergies of P2G und alcoholic CO2 for the efficient production of Methan and Bioethanol, in: o. Hg.: o. O. 2015.","bjps":"Broeker T et al. (2015) BioCO2nvert - Synergies of P2G Und Alcoholic CO2 for the Efficient Production of Methan and Bioethanol.","mla":"Broeker, Timo, et al. BioCO2nvert - Synergies of P2G Und Alcoholic CO2 for the Efficient Production of Methan and Bioethanol. 2015.","havard":"T. Broeker, M. Hoffarth, J. Schneider, K. Heikrodt, BioCO2nvert - Synergies of P2G und alcoholic CO2 for the efficient production of Methan and Bioethanol, in: 2015.","van":"Broeker T, Hoffarth M, Schneider J, Heikrodt K. BioCO2nvert - Synergies of P2G und alcoholic CO2 for the efficient production of Methan and Bioethanol. In 2015.","chicago":"Broeker, Timo, Marc Hoffarth, Jan Schneider, and Klaus Heikrodt. “ BioCO2nvert - Synergies of P2G Und Alcoholic CO2 for the Efficient Production of Methan and Bioethanol,” 2015.","apa":"Broeker, T., Hoffarth, M., Schneider, J., & Heikrodt, K. (2015). BioCO2nvert - Synergies of P2G und alcoholic CO2 for the efficient production of Methan and Bioethanol. 12. Internationaler Fachkongress für Biokraftstoffe „Fuels of the Future“, Berlin.","din1505-2-1":"Broeker, Timo ; Hoffarth, Marc ; Schneider, Jan ; Heikrodt, Klaus: BioCO2nvert - Synergies of P2G und alcoholic CO2 for the efficient production of Methan and Bioethanol. In: , 2015","chicago-de":"Broeker, Timo, Marc Hoffarth, Jan Schneider und Klaus Heikrodt. 2015. BioCO2nvert - Synergies of P2G und alcoholic CO2 for the efficient production of Methan and Bioethanol. In: .","short":"T. Broeker, M. Hoffarth, J. Schneider, K. Heikrodt, in: 2015.","ama":"Broeker T, Hoffarth M, Schneider J, Heikrodt K. BioCO2nvert - Synergies of P2G und alcoholic CO2 for the efficient production of Methan and Bioethanol. In: ; 2015.","ieee":"T. Broeker, M. Hoffarth, J. Schneider, and K. Heikrodt, “ BioCO2nvert - Synergies of P2G und alcoholic CO2 for the efficient production of Methan and Bioethanol,” presented at the 12. Internationaler Fachkongress für Biokraftstoffe „Fuels of the Future“, Berlin, 2015."},"title":" BioCO2nvert - Synergies of P2G und alcoholic CO2 for the efficient production of Methan and Bioethanol","status":"public","author":[{"first_name":"Timo","full_name":"Broeker, Timo","last_name":"Broeker","id":"43927"},{"first_name":"Marc","last_name":"Hoffarth","full_name":"Hoffarth, Marc","id":"52330"},{"orcid":"0000-0001-6401-8873","last_name":"Schneider","full_name":"Schneider, Jan","id":"13209","first_name":"Jan"},{"first_name":"Klaus","full_name":"Heikrodt, Klaus","id":"46269","last_name":"Heikrodt"}],"year":"2015","department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"conference":{"end_date":"2015-01-21","start_date":"2015-01-21","location":"Berlin","name":"12. Internationaler Fachkongress für Biokraftstoffe „Fuels of the Future“"},"user_id":"83779","date_updated":"2024-05-22T10:00:14Z","date_created":"2021-04-16T06:26:48Z","type":"conference","_id":"5555","language":[{"iso":"eng"}]},{"title":"Energetische Verwertung von Trester aus der Fruchtsaftindustrie","citation":{"ama":"Broeker T, Schneider J, Otto K. Energetische Verwertung von Trester aus der Fruchtsaftindustrie. In: ; 2015.","ieee":"T. Broeker, J. Schneider, and K. Otto, “Energetische Verwertung von Trester aus der Fruchtsaftindustrie,” presented at the Verband der deutschen Fruchtsaftindustrie VdF e. V. Fachausschuss “Technik, Umwelt und Forschung,” Mertingen, 2015.","short":"T. Broeker, J. Schneider, K. Otto, in: 2015.","din1505-2-1":"Broeker, Timo ; Schneider, Jan ; Otto, K.: Energetische Verwertung von Trester aus der Fruchtsaftindustrie. In: , 2015","chicago-de":"Broeker, Timo, Jan Schneider und K. Otto. 2015. Energetische Verwertung von Trester aus der Fruchtsaftindustrie. In: .","van":"Broeker T, Schneider J, Otto K. Energetische Verwertung von Trester aus der Fruchtsaftindustrie. In 2015.","ufg":"Broeker, Timo/Schneider, Jan/Otto, K.: Energetische Verwertung von Trester aus der Fruchtsaftindustrie, in: o. Hg.: o. O. 2015.","bjps":"Broeker T, Schneider J and Otto K (2015) Energetische Verwertung von Trester aus der Fruchtsaftindustrie.","mla":"Broeker, Timo, et al. Energetische Verwertung von Trester aus der Fruchtsaftindustrie. 2015.","havard":"T. Broeker, J. Schneider, K. Otto, Energetische Verwertung von Trester aus der Fruchtsaftindustrie, in: 2015.","apa":"Broeker, T., Schneider, J., & Otto, K. (2015). Energetische Verwertung von Trester aus der Fruchtsaftindustrie. Verband der deutschen Fruchtsaftindustrie VdF e. V. Fachausschuss “Technik, Umwelt und Forschung,” Mertingen.","chicago":"Broeker, Timo, Jan Schneider, and K. Otto. “Energetische Verwertung von Trester aus der Fruchtsaftindustrie,” 2015."},"year":"2015","author":[{"last_name":"Broeker","first_name":"Timo","full_name":"Broeker, Timo","id":"43927"},{"last_name":"Schneider","first_name":"Jan","full_name":"Schneider, Jan","id":"13209","orcid":"0000-0001-6401-8873"},{"full_name":"Otto, K.","last_name":"Otto","first_name":"K."}],"conference":{"name":"Verband der deutschen Fruchtsaftindustrie VdF e. V. Fachausschuss “Technik, Umwelt und Forschung”","location":"Mertingen","end_date":"2015-03-03","start_date":"2015-03-03"},"department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"status":"public","date_created":"2021-04-16T06:32:40Z","type":"conference","user_id":"83779","date_updated":"2024-05-22T15:07:29Z","_id":"5556","language":[{"iso":"ger"}]},{"status":"public","author":[{"full_name":"Schneider, Jan","first_name":"Jan","id":"13209","last_name":"Schneider","orcid":"0000-0001-6401-8873"},{"first_name":"Knut","id":"13329","full_name":"Schwarzer, Knut","last_name":"Schwarzer"},{"first_name":"Anna","last_name":"Dammann_","id":"43899","full_name":"Dammann_, Anna"},{"last_name":"Müller","first_name":"Ulrich","id":"12119","full_name":"Müller, Ulrich"}],"year":"2015","conference":{"start_date":"2015-05","end_date":"2015-05","name":"35th EBC Congress","location":"Porto (Portugal)"},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"},{"_id":"DEP4018"}],"citation":{"apa":"Schneider, J., Schwarzer, K., Dammann_, A., & Müller, U. (2015). Determination of Pasteurization Units in a flash pasteurizers under consideration of heating and cooling sections and the residence time distribution. 35th EBC Congress, Porto (Portugal).","ieee":"J. Schneider, K. Schwarzer, A. Dammann_, and U. Müller, “Determination of Pasteurization Units in a flash pasteurizers under consideration of heating and cooling sections and the residence time distribution,” presented at the 35th EBC Congress, Porto (Portugal), 2015.","chicago":"Schneider, Jan, Knut Schwarzer, Anna Dammann_, and Ulrich Müller. “Determination of Pasteurization Units in a Flash Pasteurizers under Consideration of Heating and Cooling Sections and the Residence Time Distribution,” 2015.","van":"Schneider J, Schwarzer K, Dammann_ A, Müller U. Determination of Pasteurization Units in a flash pasteurizers under consideration of heating and cooling sections and the residence time distribution. In 2015.","ama":"Schneider J, Schwarzer K, Dammann_ A, Müller U. Determination of Pasteurization Units in a flash pasteurizers under consideration of heating and cooling sections and the residence time distribution. In: ; 2015.","ufg":"Schneider, Jan u. a.: Determination of Pasteurization Units in a flash pasteurizers under consideration of heating and cooling sections and the residence time distribution, in: o. Hg.: o. O. 2015.","mla":"Schneider, Jan, et al. Determination of Pasteurization Units in a Flash Pasteurizers under Consideration of Heating and Cooling Sections and the Residence Time Distribution. 2015.","bjps":"Schneider J et al. (2015) Determination of Pasteurization Units in a Flash Pasteurizers under Consideration of Heating and Cooling Sections and the Residence Time Distribution.","havard":"J. Schneider, K. Schwarzer, A. Dammann_, U. Müller, Determination of Pasteurization Units in a flash pasteurizers under consideration of heating and cooling sections and the residence time distribution, in: 2015.","short":"J. Schneider, K. Schwarzer, A. Dammann_, U. Müller, in: 2015.","chicago-de":"Schneider, Jan, Knut Schwarzer, Anna Dammann_ und Ulrich Müller. 2015. Determination of Pasteurization Units in a flash pasteurizers under consideration of heating and cooling sections and the residence time distribution. In: .","din1505-2-1":"Schneider, Jan ; Schwarzer, Knut ; Dammann_, Anna ; Müller, Ulrich: Determination of Pasteurization Units in a flash pasteurizers under consideration of heating and cooling sections and the residence time distribution. In: , 2015"},"title":"Determination of Pasteurization Units in a flash pasteurizers under consideration of heating and cooling sections and the residence time distribution","language":[{"iso":"eng"}],"_id":"5557","user_id":"83779","date_updated":"2024-05-22T15:08:02Z","date_created":"2021-04-16T06:37:54Z","type":"conference"},{"language":[{"iso":"ger"}],"_id":"5558","date_updated":"2024-05-22T15:08:46Z","user_id":"83779","date_created":"2021-04-16T06:42:02Z","type":"journal_article","publication":"Getränkeherstellung Deutschland","status":"public","publisher":"Kuhn Fachverlag GmbH & Co. KG","department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"year":"2015","author":[{"full_name":"Schneider, Jan","first_name":"Jan","last_name":"Schneider","id":"13209","orcid":"0000-0001-6401-8873"}],"citation":{"ieee":"J. Schneider, “Heute noch unrentabel und morgen schon die große Chance,” Getränkeherstellung Deutschland, 2015.","ama":"Schneider J. Heute noch unrentabel und morgen schon die große Chance. Getränkeherstellung Deutschland. Published online 2015.","chicago":"Schneider, Jan. “Heute noch unrentabel und morgen schon die große Chance.” Getränkeherstellung Deutschland, 2015.","apa":"Schneider, J. (2015). Heute noch unrentabel und morgen schon die große Chance. Getränkeherstellung Deutschland.","ufg":"Schneider, Jan: Heute noch unrentabel und morgen schon die große Chance, in: Getränkeherstellung Deutschland (2015).","mla":"Schneider, Jan. “Heute noch unrentabel und morgen schon die große Chance.” Getränkeherstellung Deutschland, 2015.","bjps":"Schneider J (2015) Heute noch unrentabel und morgen schon die große Chance. Getränkeherstellung Deutschland.","havard":"J. Schneider, Heute noch unrentabel und morgen schon die große Chance, Getränkeherstellung Deutschland. (2015).","van":"Schneider J. Heute noch unrentabel und morgen schon die große Chance. Getränkeherstellung Deutschland. 2015;","chicago-de":"Schneider, Jan. 2015. Heute noch unrentabel und morgen schon die große Chance. Getränkeherstellung Deutschland.","din1505-2-1":"Schneider, Jan: Heute noch unrentabel und morgen schon die große Chance. In: Getränkeherstellung Deutschland, Kuhn Fachverlag GmbH & Co. KG (2015)","short":"J. Schneider, Getränkeherstellung Deutschland (2015)."},"title":"Heute noch unrentabel und morgen schon die große Chance"},{"language":[{"iso":"eng"}],"_id":"5559","publication":"Brauwelt International VI","type":"journal_article","date_created":"2021-04-16T06:45:21Z","user_id":"83779","date_updated":"2024-05-22T15:10:47Z","year":"2015","author":[{"last_name":"Schwarzer","first_name":"Knut","id":"13329","full_name":"Schwarzer, Knut"},{"last_name":"Dammann_","id":"43899","full_name":"Dammann_, Anna","first_name":"Anna"},{"orcid":"0000-0001-6401-8873","last_name":"Schneider","id":"13209","first_name":"Jan","full_name":"Schneider, Jan"}],"department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"status":"public","page":"S. 365-368","publisher":"Fachverlag Hans Carl GmbH","title":"Testing Pasteurization Units","citation":{"chicago-de":"Schwarzer, Knut, Anna Dammann_ und Jan Schneider. 2015. Testing Pasteurization Units. Brauwelt International VI: S. 365-368.","din1505-2-1":"Schwarzer, Knut ; Dammann_, Anna ; Schneider, Jan: Testing Pasteurization Units. In: Brauwelt International VI, Fachverlag Hans Carl GmbH (2015), S. S. 365-368","short":"K. Schwarzer, A. Dammann_, J. Schneider, Brauwelt International VI (2015) S. 365-368.","mla":"Schwarzer, Knut, et al. “Testing Pasteurization Units.” Brauwelt International VI, 2015, p. S. 365-368.","bjps":"Schwarzer K, Dammann_ A and Schneider J (2015) Testing Pasteurization Units. Brauwelt International VI S. 365-368.","havard":"K. Schwarzer, A. Dammann_, J. Schneider, Testing Pasteurization Units, Brauwelt International VI. (2015) S. 365-368.","ufg":"Schwarzer, Knut/Dammann_, Anna/Schneider, Jan: Testing Pasteurization Units, in: Brauwelt International VI (2015), S. S. 365-368.","van":"Schwarzer K, Dammann_ A, Schneider J. Testing Pasteurization Units. Brauwelt International VI. 2015;S. 365-368.","chicago":"Schwarzer, Knut, Anna Dammann_, and Jan Schneider. “Testing Pasteurization Units.” Brauwelt International VI, 2015, S. 365-368.","apa":"Schwarzer, K., Dammann_, A., & Schneider, J. (2015). Testing Pasteurization Units. Brauwelt International VI, S. 365-368.","ama":"Schwarzer K, Dammann_ A, Schneider J. Testing Pasteurization Units. Brauwelt International VI. Published online 2015:S. 365-368.","ieee":"K. Schwarzer, A. Dammann_, and J. Schneider, “Testing Pasteurization Units,” Brauwelt International VI, p. S. 365-368, 2015."}},{"language":[{"iso":"ger"}],"_id":"5560","date_updated":"2024-05-22T15:11:21Z","user_id":"83779","date_created":"2021-04-16T06:49:40Z","type":"conference","status":"public","department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"conference":{"location":"Bremen","name":"Fresenius Fachtagung Abfüllung Sensibler Getränke","start_date":"2015-09-16","end_date":"2015-09-16"},"year":"2015","author":[{"orcid":"0000-0001-6401-8873","first_name":"Jan","last_name":"Schneider","full_name":"Schneider, Jan","id":"13209"},{"first_name":"Knut","last_name":"Schwarzer","id":"13329","full_name":"Schwarzer, Knut"},{"full_name":"Dammann_, Anna","last_name":"Dammann_","first_name":"Anna","id":"43899"}],"citation":{"ama":"Schneider J, Schwarzer K, Dammann_ A. Einsatz eines chemischen Indikators zur exakten Bestimmung der Pasteurisationseinheiten - ein Ersatz für den Count Reduction Test? In: ; 2015.","ieee":"J. Schneider, K. Schwarzer, and A. Dammann_, “Einsatz eines chemischen Indikators zur exakten Bestimmung der Pasteurisationseinheiten - ein Ersatz für den Count Reduction Test?,” presented at the Fresenius Fachtagung Abfüllung Sensibler Getränke, Bremen, 2015.","din1505-2-1":"Schneider, Jan ; Schwarzer, Knut ; Dammann_, Anna: Einsatz eines chemischen Indikators zur exakten Bestimmung der Pasteurisationseinheiten - ein Ersatz für den Count Reduction Test? In: , 2015","chicago-de":"Schneider, Jan, Knut Schwarzer und Anna Dammann_. 2015. Einsatz eines chemischen Indikators zur exakten Bestimmung der Pasteurisationseinheiten - ein Ersatz für den Count Reduction Test? In: .","short":"J. Schneider, K. Schwarzer, A. Dammann_, in: 2015.","ufg":"Schneider, Jan/Schwarzer, Knut/Dammann_, Anna: Einsatz eines chemischen Indikators zur exakten Bestimmung der Pasteurisationseinheiten - ein Ersatz für den Count Reduction Test?, in: o. Hg.: o. O. 2015.","bjps":"Schneider J, Schwarzer K and Dammann_ A (2015) Einsatz eines chemischen Indikators zur exakten Bestimmung der Pasteurisationseinheiten - ein Ersatz für den Count Reduction Test?","mla":"Schneider, Jan, et al. Einsatz eines chemischen Indikators zur exakten Bestimmung der Pasteurisationseinheiten - ein Ersatz für den Count Reduction Test? 2015.","havard":"J. Schneider, K. Schwarzer, A. Dammann_, Einsatz eines chemischen Indikators zur exakten Bestimmung der Pasteurisationseinheiten - ein Ersatz für den Count Reduction Test?, in: 2015.","van":"Schneider J, Schwarzer K, Dammann_ A. Einsatz eines chemischen Indikators zur exakten Bestimmung der Pasteurisationseinheiten - ein Ersatz für den Count Reduction Test? In 2015.","chicago":"Schneider, Jan, Knut Schwarzer, and Anna Dammann_. “Einsatz eines chemischen Indikators zur exakten Bestimmung der Pasteurisationseinheiten - ein Ersatz für den Count Reduction Test?,” 2015.","apa":"Schneider, J., Schwarzer, K., & Dammann_, A. (2015). Einsatz eines chemischen Indikators zur exakten Bestimmung der Pasteurisationseinheiten - ein Ersatz für den Count Reduction Test? Fresenius Fachtagung Abfüllung Sensibler Getränke, Bremen."},"title":"Einsatz eines chemischen Indikators zur exakten Bestimmung der Pasteurisationseinheiten - ein Ersatz für den Count Reduction Test?"},{"language":[{"iso":"eng"}],"_id":"5561","user_id":"83779","date_updated":"2024-05-22T15:11:53Z","type":"conference","date_created":"2021-04-16T06:58:39Z","status":"public","year":"2015","author":[{"first_name":"Timo","full_name":"Broeker, Timo","id":"43927","last_name":"Broeker"},{"first_name":"D.","full_name":"Blöhse, D.","last_name":"Blöhse"},{"id":"21006","last_name":"Ramke","full_name":"Ramke, Hans-Günter","first_name":"Hans-Günter"},{"orcid":"0000-0001-6401-8873","last_name":"Schneider","first_name":"Jan","full_name":"Schneider, Jan","id":"13209"}],"department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"conference":{"location":"Nice (Frankreich)","name":"3rd Congress of Applied Biotechnology (Vortrag)","start_date":"2015-09-27","end_date":"2015-10-01"},"citation":{"short":"T. Broeker, D. Blöhse, H.-G. Ramke, J. Schneider, in: 2015.","din1505-2-1":"Broeker, Timo ; Blöhse, D. ; Ramke, Hans-Günter ; Schneider, Jan: How to extend a Distillery into a Lignocellulose Biorefinery. In: , 2015","chicago-de":"Broeker, Timo, D. Blöhse, Hans-Günter Ramke und Jan Schneider. 2015. How to extend a Distillery into a Lignocellulose Biorefinery. In: .","ieee":"T. Broeker, D. Blöhse, H.-G. Ramke, and J. Schneider, “How to extend a Distillery into a Lignocellulose Biorefinery,” presented at the 3rd Congress of Applied Biotechnology (Vortrag), Nice (Frankreich), 2015.","apa":"Broeker, T., Blöhse, D., Ramke, H.-G., & Schneider, J. (2015). How to extend a Distillery into a Lignocellulose Biorefinery. 3rd Congress of Applied Biotechnology (Vortrag), Nice (Frankreich).","chicago":"Broeker, Timo, D. Blöhse, Hans-Günter Ramke, and Jan Schneider. “How to Extend a Distillery into a Lignocellulose Biorefinery,” 2015.","ama":"Broeker T, Blöhse D, Ramke HG, Schneider J. How to extend a Distillery into a Lignocellulose Biorefinery. In: ; 2015.","van":"Broeker T, Blöhse D, Ramke HG, Schneider J. How to extend a Distillery into a Lignocellulose Biorefinery. In 2015.","mla":"Broeker, Timo, et al. How to Extend a Distillery into a Lignocellulose Biorefinery. 2015.","havard":"T. Broeker, D. Blöhse, H.-G. Ramke, J. Schneider, How to extend a Distillery into a Lignocellulose Biorefinery, in: 2015.","bjps":"Broeker T et al. (2015) How to Extend a Distillery into a Lignocellulose Biorefinery.","ufg":"Broeker, Timo u. a.: How to extend a Distillery into a Lignocellulose Biorefinery, in: o. Hg.: o. O. 2015."},"title":"How to extend a Distillery into a Lignocellulose Biorefinery"},{"language":[{"iso":"eng"}],"_id":"5562","type":"conference","date_created":"2021-04-16T07:03:35Z","date_updated":"2024-05-22T15:13:50Z","user_id":"83779","conference":{"name":"10th European Congress of Chemical Engineering (Posterbeitrag)","location":"Nice (Frankreich)","end_date":"2015-10-01","start_date":"2015-09-27"},"department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"year":"2015","author":[{"last_name":"Kothe","first_name":"T.","full_name":"Kothe, T."},{"id":"75050","first_name":"Anton","last_name":"Wiens","full_name":"Wiens, Anton"},{"full_name":"Kracht, A.","first_name":"A.","last_name":"Kracht"},{"full_name":"Kaetzel, M.","last_name":"Kaetzel","first_name":"M."},{"last_name":"Rossmann","first_name":"Sören","full_name":"Rossmann, Sören","id":"61416"},{"first_name":"Jürgen","last_name":"Rabenhorst","id":"13454","full_name":"Rabenhorst, Jürgen"}],"status":"public","title":"Characterization and Optimization of the Enzymatic Hydrolysis of Different Citrus Peel (Orange) Qualities.","citation":{"chicago-de":"Kothe, T., Anton Wiens, A. Kracht, M. Kaetzel, Sören Rossmann und Jürgen Rabenhorst. 2015. Characterization and Optimization of the Enzymatic Hydrolysis of Different Citrus Peel (Orange) Qualities. In: .","din1505-2-1":"Kothe, T. ; Wiens, Anton ; Kracht, A. ; Kaetzel, M. ; Rossmann, Sören ; Rabenhorst, Jürgen: Characterization and Optimization of the Enzymatic Hydrolysis of Different Citrus Peel (Orange) Qualities. In: , 2015","short":"T. Kothe, A. Wiens, A. Kracht, M. Kaetzel, S. Rossmann, J. Rabenhorst, in: 2015.","chicago":"Kothe, T., Anton Wiens, A. Kracht, M. Kaetzel, Sören Rossmann, and Jürgen Rabenhorst. “Characterization and Optimization of the Enzymatic Hydrolysis of Different Citrus Peel (Orange) Qualities.,” 2015.","apa":"Kothe, T., Wiens, A., Kracht, A., Kaetzel, M., Rossmann, S., & Rabenhorst, J. (2015). Characterization and Optimization of the Enzymatic Hydrolysis of Different Citrus Peel (Orange) Qualities. 10th European Congress of Chemical Engineering (Posterbeitrag), Nice (Frankreich).","bjps":"Kothe T et al. (2015) Characterization and Optimization of the Enzymatic Hydrolysis of Different Citrus Peel (Orange) Qualities.","havard":"T. Kothe, A. Wiens, A. Kracht, M. Kaetzel, S. Rossmann, J. Rabenhorst, Characterization and Optimization of the Enzymatic Hydrolysis of Different Citrus Peel (Orange) Qualities., in: 2015.","mla":"Kothe, T., et al. Characterization and Optimization of the Enzymatic Hydrolysis of Different Citrus Peel (Orange) Qualities. 2015.","ufg":"Kothe, T. u. a.: Characterization and Optimization of the Enzymatic Hydrolysis of Different Citrus Peel (Orange) Qualities., in: o. Hg.: o. O. 2015.","van":"Kothe T, Wiens A, Kracht A, Kaetzel M, Rossmann S, Rabenhorst J. Characterization and Optimization of the Enzymatic Hydrolysis of Different Citrus Peel (Orange) Qualities. In 2015.","ieee":"T. Kothe, A. Wiens, A. Kracht, M. Kaetzel, S. Rossmann, and J. Rabenhorst, “Characterization and Optimization of the Enzymatic Hydrolysis of Different Citrus Peel (Orange) Qualities.,” presented at the 10th European Congress of Chemical Engineering (Posterbeitrag), Nice (Frankreich), 2015.","ama":"Kothe T, Wiens A, Kracht A, Kaetzel M, Rossmann S, Rabenhorst J. Characterization and Optimization of the Enzymatic Hydrolysis of Different Citrus Peel (Orange) Qualities. In: ; 2015."}},{"user_id":"83779","date_updated":"2024-05-22T15:14:28Z","type":"conference","date_created":"2021-04-16T07:08:03Z","_id":"5563","language":[{"iso":"eng"}],"citation":{"chicago":"Hoffarth, Marc, Timo Broeker, V. Wolff, C. Mengendoth, K. Heidkrodt, and Jan Schneider. “Synergies between Biocatalytic Methanation of Power-To-Gas Hydrogen with Carbon Dioxide from Alcoholic Fermentation,” 2015.","apa":"Hoffarth, M., Broeker, T., Wolff, V., Mengendoth, C., Heidkrodt, K., & Schneider, J. (2015). Synergies between biocatalytic methanation of Power-To-Gas hydrogen with carbon dioxide from alcoholic fermentation. 10th European Congress of Chemical Engineering (Posterbeitrag), Nice (Frankreich).","havard":"M. Hoffarth, T. Broeker, V. Wolff, C. Mengendoth, K. Heidkrodt, J. Schneider, Synergies between biocatalytic methanation of Power-To-Gas hydrogen with carbon dioxide from alcoholic fermentation, in: 2015.","bjps":"Hoffarth M et al. (2015) Synergies between Biocatalytic Methanation of Power-To-Gas Hydrogen with Carbon Dioxide from Alcoholic Fermentation.","mla":"Hoffarth, Marc, et al. Synergies between Biocatalytic Methanation of Power-To-Gas Hydrogen with Carbon Dioxide from Alcoholic Fermentation. 2015.","ufg":"Hoffarth, Marc u. a.: Synergies between biocatalytic methanation of Power-To-Gas hydrogen with carbon dioxide from alcoholic fermentation, in: o. Hg.: o. O. 2015.","van":"Hoffarth M, Broeker T, Wolff V, Mengendoth C, Heidkrodt K, Schneider J. Synergies between biocatalytic methanation of Power-To-Gas hydrogen with carbon dioxide from alcoholic fermentation. In 2015.","chicago-de":"Hoffarth, Marc, Timo Broeker, V. Wolff, C. Mengendoth, K. Heidkrodt und Jan Schneider. 2015. Synergies between biocatalytic methanation of Power-To-Gas hydrogen with carbon dioxide from alcoholic fermentation. In: .","din1505-2-1":"Hoffarth, Marc ; Broeker, Timo ; Wolff, V. ; Mengendoth, C. ; Heidkrodt, K. ; Schneider, Jan: Synergies between biocatalytic methanation of Power-To-Gas hydrogen with carbon dioxide from alcoholic fermentation. In: , 2015","short":"M. Hoffarth, T. Broeker, V. Wolff, C. Mengendoth, K. Heidkrodt, J. Schneider, in: 2015.","ieee":"M. Hoffarth, T. Broeker, V. Wolff, C. Mengendoth, K. Heidkrodt, and J. Schneider, “Synergies between biocatalytic methanation of Power-To-Gas hydrogen with carbon dioxide from alcoholic fermentation,” presented at the 10th European Congress of Chemical Engineering (Posterbeitrag), Nice (Frankreich), 2015.","ama":"Hoffarth M, Broeker T, Wolff V, Mengendoth C, Heidkrodt K, Schneider J. Synergies between biocatalytic methanation of Power-To-Gas hydrogen with carbon dioxide from alcoholic fermentation. In: ; 2015."},"title":"Synergies between biocatalytic methanation of Power-To-Gas hydrogen with carbon dioxide from alcoholic fermentation","status":"public","author":[{"full_name":"Hoffarth, Marc","first_name":"Marc","last_name":"Hoffarth","id":"52330"},{"id":"43927","last_name":"Broeker","first_name":"Timo","full_name":"Broeker, Timo"},{"full_name":"Wolff, V.","first_name":"V.","last_name":"Wolff"},{"first_name":"C.","full_name":"Mengendoth, C.","last_name":"Mengendoth"},{"full_name":"Heidkrodt, K.","first_name":"K.","last_name":"Heidkrodt"},{"id":"13209","last_name":"Schneider","full_name":"Schneider, Jan","first_name":"Jan","orcid":"0000-0001-6401-8873"}],"year":"2015","conference":{"location":"Nice (Frankreich)","name":"10th European Congress of Chemical Engineering (Posterbeitrag)","start_date":"2015-09-27","end_date":"2015-10-01"},"department":[{"_id":"DEP4023"},{"_id":"DEP4018"}]},{"citation":{"ieee":"K. Schweizer and J. Schneider, “Wie groß ist der Beitrag der Aufheiz- und Abkühlzonen einer KZE für die Abtötung der MO oder Muss man die Aufheiz- und Abkühlzonen einer KZE die PE Berechnung einbeziehen? ,” presented at the TWA Berlin, Berlin, 2015.","apa":"Schweizer, K., & Schneider, J. (2015). Wie groß ist der Beitrag der Aufheiz- und Abkühlzonen einer KZE für die Abtötung der MO oder Muss man die Aufheiz- und Abkühlzonen einer KZE die PE Berechnung einbeziehen? . TWA Berlin, Berlin.","chicago":"Schweizer, K., and Jan Schneider. “Wie groß ist der Beitrag der Aufheiz- und Abkühlzonen einer KZE für die Abtötung der MO oder Muss man die Aufheiz- und Abkühlzonen einer KZE die PE Berechnung einbeziehen? ,” 2015.","ama":"Schweizer K, Schneider J. Wie groß ist der Beitrag der Aufheiz- und Abkühlzonen einer KZE für die Abtötung der MO oder Muss man die Aufheiz- und Abkühlzonen einer KZE die PE Berechnung einbeziehen? . In: ; 2015.","van":"Schweizer K, Schneider J. Wie groß ist der Beitrag der Aufheiz- und Abkühlzonen einer KZE für die Abtötung der MO oder Muss man die Aufheiz- und Abkühlzonen einer KZE die PE Berechnung einbeziehen? . In 2015.","bjps":"Schweizer K and Schneider J (2015) Wie groß ist der Beitrag der Aufheiz- und Abkühlzonen einer KZE für die Abtötung der MO oder Muss man die Aufheiz- und Abkühlzonen einer KZE die PE Berechnung einbeziehen? .","havard":"K. Schweizer, J. Schneider, Wie groß ist der Beitrag der Aufheiz- und Abkühlzonen einer KZE für die Abtötung der MO oder Muss man die Aufheiz- und Abkühlzonen einer KZE die PE Berechnung einbeziehen? , in: 2015.","mla":"Schweizer, K., and Jan Schneider. Wie groß ist der Beitrag der Aufheiz- und Abkühlzonen einer KZE für die Abtötung der MO oder Muss man die Aufheiz- und Abkühlzonen einer KZE die PE Berechnung einbeziehen? . 2015.","ufg":"Schweizer, K./Schneider, Jan: Wie groß ist der Beitrag der Aufheiz- und Abkühlzonen einer KZE für die Abtötung der MO oder Muss man die Aufheiz- und Abkühlzonen einer KZE die PE Berechnung einbeziehen? , in: o. Hg.: o. O. 2015.","short":"K. Schweizer, J. Schneider, in: 2015.","din1505-2-1":"Schweizer, K. ; Schneider, Jan: Wie groß ist der Beitrag der Aufheiz- und Abkühlzonen einer KZE für die Abtötung der MO oder Muss man die Aufheiz- und Abkühlzonen einer KZE die PE Berechnung einbeziehen? . In: , 2015","chicago-de":"Schweizer, K. und Jan Schneider. 2015. Wie groß ist der Beitrag der Aufheiz- und Abkühlzonen einer KZE für die Abtötung der MO oder Muss man die Aufheiz- und Abkühlzonen einer KZE die PE Berechnung einbeziehen? . In: ."},"title":"Wie groß ist der Beitrag der Aufheiz- und Abkühlzonen einer KZE für die Abtötung der MO oder Muss man die Aufheiz- und Abkühlzonen einer KZE die PE Berechnung einbeziehen? ","status":"public","author":[{"full_name":"Schweizer, K.","first_name":"K.","last_name":"Schweizer"},{"id":"13209","first_name":"Jan","full_name":"Schneider, Jan","last_name":"Schneider","orcid":"0000-0001-6401-8873"}],"year":"2015","department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"conference":{"name":"TWA Berlin","location":"Berlin","start_date":"2015-10-05","end_date":"2015-10-05"},"user_id":"83779","date_updated":"2024-05-22T15:17:37Z","date_created":"2021-04-16T07:16:29Z","type":"conference","_id":"5565","language":[{"iso":"ger"}]},{"_id":"5566","language":[{"iso":"eng"}],"date_created":"2021-04-16T07:20:07Z","type":"journal_article","publication":"Brauindustrie 11","intvolume":" 11","date_updated":"2024-05-22T15:18:15Z","user_id":"83779","department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"year":"2015","author":[{"last_name":"Behler","first_name":"M.","full_name":"Behler, M."},{"id":"52050","first_name":"Christian","full_name":"Schulze, Christian","last_name":"Schulze"},{"first_name":"Jan","last_name":"Schneider","id":"13209","full_name":"Schneider, Jan","orcid":"0000-0001-6401-8873"}],"page":"S. 92-98","status":"public","title":"Einsatz von Magnetrührwerken in Hefeanzuchtfermentern und deren Einfluss auf die Vitalität und Viabilität von Saccharomyces-Hefen","citation":{"van":"Behler M, Schulze C, Schneider J. Einsatz von Magnetrührwerken in Hefeanzuchtfermentern und deren Einfluss auf die Vitalität und Viabilität von Saccharomyces-Hefen. Brauindustrie 11. 2015;11:S. 92-98.","mla":"Behler, M., et al. “Einsatz von Magnetrührwerken in Hefeanzuchtfermentern Und Deren Einfluss Auf Die Vitalität Und Viabilität von Saccharomyces-Hefen.” Brauindustrie 11, vol. 11, 2015, p. S. 92-98.","havard":"M. Behler, C. Schulze, J. Schneider, Einsatz von Magnetrührwerken in Hefeanzuchtfermentern und deren Einfluss auf die Vitalität und Viabilität von Saccharomyces-Hefen, Brauindustrie 11. 11 (2015) S. 92-98.","bjps":"Behler M, Schulze C and Schneider J (2015) Einsatz von Magnetrührwerken in Hefeanzuchtfermentern Und Deren Einfluss Auf Die Vitalität Und Viabilität von Saccharomyces-Hefen. Brauindustrie 11 11, S. 92-98.","ufg":"Behler, M./Schulze, Christian/Schneider, Jan: Einsatz von Magnetrührwerken in Hefeanzuchtfermentern und deren Einfluss auf die Vitalität und Viabilität von Saccharomyces-Hefen, in: Brauindustrie 11 11 (2015), S. S. 92-98.","apa":"Behler, M., Schulze, C., & Schneider, J. (2015). Einsatz von Magnetrührwerken in Hefeanzuchtfermentern und deren Einfluss auf die Vitalität und Viabilität von Saccharomyces-Hefen. Brauindustrie 11, 11, S. 92-98.","chicago":"Behler, M., Christian Schulze, and Jan Schneider. “Einsatz von Magnetrührwerken in Hefeanzuchtfermentern Und Deren Einfluss Auf Die Vitalität Und Viabilität von Saccharomyces-Hefen.” Brauindustrie 11 11 (2015): S. 92-98.","short":"M. Behler, C. Schulze, J. Schneider, Brauindustrie 11 11 (2015) S. 92-98.","din1505-2-1":"Behler, M. ; Schulze, Christian ; Schneider, Jan: Einsatz von Magnetrührwerken in Hefeanzuchtfermentern und deren Einfluss auf die Vitalität und Viabilität von Saccharomyces-Hefen. In: Brauindustrie 11 Bd. 11 (2015), S. S. 92-98","chicago-de":"Behler, M., Christian Schulze und Jan Schneider. 2015. Einsatz von Magnetrührwerken in Hefeanzuchtfermentern und deren Einfluss auf die Vitalität und Viabilität von Saccharomyces-Hefen. Brauindustrie 11 11: S. 92-98.","ama":"Behler M, Schulze C, Schneider J. Einsatz von Magnetrührwerken in Hefeanzuchtfermentern und deren Einfluss auf die Vitalität und Viabilität von Saccharomyces-Hefen. Brauindustrie 11. 2015;11:S. 92-98.","ieee":"M. Behler, C. Schulze, and J. Schneider, “Einsatz von Magnetrührwerken in Hefeanzuchtfermentern und deren Einfluss auf die Vitalität und Viabilität von Saccharomyces-Hefen,” Brauindustrie 11, vol. 11, p. S. 92-98, 2015."},"volume":11},{"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"author":[{"full_name":"Pliske, Roland","id":"12864","last_name":"Pliske","first_name":"Roland"},{"first_name":"Ulrich","full_name":"Müller, Ulrich","id":"12119","last_name":"Müller"},{"last_name":"Kohlus","full_name":"Kohlus, R.","first_name":"R."}],"year":2015,"issue":"7","page":"S. 1006-1010","status":"public","title":"Untersuchungen zur Steigerung der Trocknungsgeschwindigkeit der Gefriertrocknung","citation":{"ama":"Pliske R, Müller U, Kohlus R. Untersuchungen zur Steigerung der Trocknungsgeschwindigkeit der Gefriertrocknung. Chemie-Ingenieur-Technik . 2015;87(7):S. 1006-1010.","ieee":"R. Pliske, U. Müller, and R. Kohlus, “Untersuchungen zur Steigerung der Trocknungsgeschwindigkeit der Gefriertrocknung,” Chemie-Ingenieur-Technik , vol. 87, no. 7, p. S. 1006-1010, 2015.","short":"R. Pliske, U. Müller, R. Kohlus, Chemie-Ingenieur-Technik 87 (2015) S. 1006-1010.","chicago-de":"Pliske, Roland, Ulrich Müller und R. Kohlus. 2015. Untersuchungen zur Steigerung der Trocknungsgeschwindigkeit der Gefriertrocknung. Chemie-Ingenieur-Technik 87, Nr. 7: S. 1006-1010.","din1505-2-1":"Pliske, Roland ; Müller, Ulrich ; Kohlus, R.: Untersuchungen zur Steigerung der Trocknungsgeschwindigkeit der Gefriertrocknung. In: Chemie-Ingenieur-Technik Bd. 87 (2015), Nr. 7, S. S. 1006-1010","van":"Pliske R, Müller U, Kohlus R. Untersuchungen zur Steigerung der Trocknungsgeschwindigkeit der Gefriertrocknung. Chemie-Ingenieur-Technik . 2015;87(7):S. 1006-1010.","havard":"R. Pliske, U. Müller, R. Kohlus, Untersuchungen zur Steigerung der Trocknungsgeschwindigkeit der Gefriertrocknung, Chemie-Ingenieur-Technik . 87 (2015) S. 1006-1010.","bjps":"Pliske R, Müller U and Kohlus R (2015) Untersuchungen Zur Steigerung Der Trocknungsgeschwindigkeit Der Gefriertrocknung. Chemie-Ingenieur-Technik 87, S. 1006-1010.","mla":"Pliske, Roland, et al. “Untersuchungen Zur Steigerung Der Trocknungsgeschwindigkeit Der Gefriertrocknung.” Chemie-Ingenieur-Technik , vol. 87, no. 7, 2015, p. S. 1006-1010.","ufg":"Pliske, Roland et. al. (2015): Untersuchungen zur Steigerung der Trocknungsgeschwindigkeit der Gefriertrocknung, in: Chemie-Ingenieur-Technik 87 (7), S. S. 1006-1010.","apa":"Pliske, R., Müller, U., & Kohlus, R. (2015). Untersuchungen zur Steigerung der Trocknungsgeschwindigkeit der Gefriertrocknung. Chemie-Ingenieur-Technik , 87(7), S. 1006-1010.","chicago":"Pliske, Roland, Ulrich Müller, and R. Kohlus. “Untersuchungen Zur Steigerung Der Trocknungsgeschwindigkeit Der Gefriertrocknung.” Chemie-Ingenieur-Technik 87, no. 7 (2015): S. 1006-1010."},"volume":87,"language":[{"iso":"eng"}],"_id":"5567","type":"journal_article","date_created":"2021-04-16T07:23:58Z","publication":"Chemie-Ingenieur-Technik ","date_updated":"2023-03-15T13:50:00Z","user_id":"74222","intvolume":" 87"},{"language":[{"iso":"eng"}],"_id":"5886","date_created":"2021-05-13T19:34:01Z","type":"conference","user_id":"83781","date_updated":"2024-12-04T13:12:12Z","corporate_editor":["Zukunftszentrum Höxter-Holzminden"],"year":"2015","author":[{"orcid":"0009-0001-8565-8199","last_name":"Häusler","id":"61520","full_name":"Häusler, Axel","first_name":"Axel"}],"department":[{"_id":"DEP1055"},{"_id":"DEP1025"},{"_id":"DEP1028"}],"conference":{"location":"Höxter","name":"Zukunftszentrum Höxter-Holzminden"},"status":"public","title":"GIS & mehr – Methoden der Informatik für (ländliche) Räume","citation":{"ama":"Häusler A. GIS & mehr – Methoden der Informatik für (ländliche) Räume. In: Zukunftszentrum Höxter-Holzminden, ed. ; 2015.","ieee":"A. Häusler, “GIS & mehr – Methoden der Informatik für (ländliche) Räume,” Höxter, 2015.","ufg":"Häusler, Axel: GIS & mehr – Methoden der Informatik für (ländliche) Räume, in: Zukunftszentrum Höxter-Holzminden (Hg.): o. O. 2015.","bjps":"Häusler A (2015) GIS & Mehr – Methoden Der Informatik Für (Ländliche) Räume. In Zukunftszentrum Höxter-Holzminden (ed.).","mla":"Häusler, Axel. GIS & Mehr – Methoden Der Informatik Für (Ländliche) Räume. Edited by Zukunftszentrum Höxter-Holzminden, 2015.","havard":"A. Häusler, GIS & mehr – Methoden der Informatik für (ländliche) Räume, in: Zukunftszentrum Höxter-Holzminden (Ed.), 2015.","van":"Häusler A. GIS & mehr – Methoden der Informatik für (ländliche) Räume. In: Zukunftszentrum Höxter-Holzminden, editor. 2015.","chicago":"Häusler, Axel. “GIS & Mehr – Methoden Der Informatik Für (Ländliche) Räume.” edited by Zukunftszentrum Höxter-Holzminden, 2015.","apa":"Häusler, A. (2015). GIS & mehr – Methoden der Informatik für (ländliche) Räume (Zukunftszentrum Höxter-Holzminden, Ed.).","chicago-de":"Häusler, Axel. 2015. GIS & mehr – Methoden der Informatik für (ländliche) Räume. In: , hg. von Zukunftszentrum Höxter-Holzminden.","din1505-2-1":"Häusler, Axel: GIS & mehr – Methoden der Informatik für (ländliche) Räume. In: Zukunftszentrum Höxter-Holzminden (Hrsg.): , 2015","short":"A. Häusler, in: Zukunftszentrum Höxter-Holzminden (Ed.), 2015."},"publication_status":"published"},{"doi":"10.1109/WFCS.2015.7160588","_id":"10167","place":"Piscataway, NJ","user_id":"83781","type":"conference_editor_article","publisher":"IEEE","abstract":[{"lang":"eng","text":"This paper discusses an alternative to common Powerline or Power-over-Ethernet applications, combining a 100BASE-TX-equivalent full duplex communication and simultaneous DC power transmission on one single twisted pair wire. The reduction of wires and connections can potentially ease the modularity and reconfigurability of industrial production installations, if the data communication offers a sufficiently high robustness against influences from the DC power transmission. This part of our research focuses on the necessary electrical adaptations between data and power circuitry and evaluates interference scenarios that are common for industrial fieldbus installations."}],"department":[{"_id":"DEP5000"},{"_id":"DEP5023"}],"conference":{"end_date":"2015-05-29","start_date":"2015-05-27","location":"Palma de Mallorca, Spain","name":"2015 IEEE World Conference on Factory Communication Systems (WFCS)"},"publication_status":"published","language":[{"iso":"eng"}],"keyword":["Wires","Transmission line measurements","Transceivers","Data communication","Power transmission lines","Wiring","Inductance"],"date_updated":"2023-07-28T12:31:47Z","date_created":"2023-07-27T11:06:36Z","publication":"2015 IEEE World Conference on Factory Communication Systems (WFCS)","publication_identifier":{"eisbn":["978-1-4799-8244-8"]},"status":"public","year":"2015","author":[{"first_name":"Derk","last_name":"Wesemann","full_name":"Wesemann, Derk","id":"1273"},{"first_name":"Jens","last_name":"Dünnermann","full_name":"Dünnermann, Jens"},{"first_name":"Marian","last_name":"Schaller","full_name":"Schaller, Marian"},{"first_name":"Norman","last_name":"Banick","full_name":"Banick, Norman"},{"first_name":"Stefan","full_name":"Witte, Stefan","last_name":"Witte","id":"1605"}],"citation":{"chicago":"Wesemann, Derk, Jens Dünnermann, Marian Schaller, Norman Banick, and Stefan Witte. Less Wires — A Novel Approach on Combined Power and Ethernet Transmission on a Single, Unshielded Twisted Pair Cable. 2015 IEEE World Conference on Factory Communication Systems (WFCS). Piscataway, NJ: IEEE, 2015. https://doi.org/10.1109/WFCS.2015.7160588.","apa":"Wesemann, D., Dünnermann, J., Schaller, M., Banick, N., & Witte, S. (2015). Less wires — A novel approach on combined power and ethernet transmission on a single, unshielded twisted pair cable. In 2015 IEEE World Conference on Factory Communication Systems (WFCS). 2015 IEEE World Conference on Factory Communication Systems (WFCS), Palma de Mallorca, Spain. IEEE. https://doi.org/10.1109/WFCS.2015.7160588","ufg":"Wesemann, Derk u. a.: Less wires — A novel approach on combined power and ethernet transmission on a single, unshielded twisted pair cable, Piscataway, NJ 2015.","bjps":"Wesemann D et al. (2015) Less Wires — A Novel Approach on Combined Power and Ethernet Transmission on a Single, Unshielded Twisted Pair Cable. Piscataway, NJ: IEEE.","mla":"Wesemann, Derk, et al. “Less Wires — A Novel Approach on Combined Power and Ethernet Transmission on a Single, Unshielded Twisted Pair Cable.” 2015 IEEE World Conference on Factory Communication Systems (WFCS), IEEE, 2015, https://doi.org/10.1109/WFCS.2015.7160588.","havard":"D. Wesemann, J. Dünnermann, M. Schaller, N. Banick, S. Witte, Less wires — A novel approach on combined power and ethernet transmission on a single, unshielded twisted pair cable, IEEE, Piscataway, NJ, 2015.","van":"Wesemann D, Dünnermann J, Schaller M, Banick N, Witte S. Less wires — A novel approach on combined power and ethernet transmission on a single, unshielded twisted pair cable. 2015 IEEE World Conference on Factory Communication Systems (WFCS). Piscataway, NJ: IEEE; 2015.","din1505-2-1":"Wesemann, Derk ; Dünnermann, Jens ; Schaller, Marian ; Banick, Norman ; Witte, Stefan: Less wires — A novel approach on combined power and ethernet transmission on a single, unshielded twisted pair cable. Piscataway, NJ : IEEE, 2015","chicago-de":"Wesemann, Derk, Jens Dünnermann, Marian Schaller, Norman Banick und Stefan Witte. 2015. Less wires — A novel approach on combined power and ethernet transmission on a single, unshielded twisted pair cable. 2015 IEEE World Conference on Factory Communication Systems (WFCS). Piscataway, NJ: IEEE. doi:10.1109/WFCS.2015.7160588, .","short":"D. Wesemann, J. Dünnermann, M. Schaller, N. Banick, S. Witte, Less Wires — A Novel Approach on Combined Power and Ethernet Transmission on a Single, Unshielded Twisted Pair Cable, IEEE, Piscataway, NJ, 2015.","ieee":"D. Wesemann, J. Dünnermann, M. Schaller, N. Banick, and S. Witte, Less wires — A novel approach on combined power and ethernet transmission on a single, unshielded twisted pair cable. Piscataway, NJ: IEEE, 2015. doi: 10.1109/WFCS.2015.7160588.","ama":"Wesemann D, Dünnermann J, Schaller M, Banick N, Witte S. Less Wires — A Novel Approach on Combined Power and Ethernet Transmission on a Single, Unshielded Twisted Pair Cable. IEEE; 2015. doi:10.1109/WFCS.2015.7160588"},"title":"Less wires — A novel approach on combined power and ethernet transmission on a single, unshielded twisted pair cable"},{"publication_status":"published","series_title":"Proceedings of SPIE","publisher":"SPIE","quality_controlled":"1","abstract":[{"text":"Optical interconnects on printed circuit board level are a promising choice to support high bandwidth for short distance interconnects. These interconnects consists of highly multimode step index waveguides with rectangular core cross sections. Therefore ray tracing is an excellent method to determine the optical path parameters, e.g. optical power, ray path lengths and local ray directions. Based on these parameters the step response, the transient transfer function and the coupling behavior can be calculated. Classical ray tracing methods calculates the optical path parameters of each ray by successively computing internal reflections until a termination condition is reached. Therefore the computing time depends on the number of internal reflections. If the optical waveguide consists of cascaded straight and curved segments, e. g. point-to-point interconnects, one can use the analytic ray tracing method to determine the optical path parameters. The whole path parameters of each ray are determined by one analytical computation. The computing time depends on the number of segments. The analytic ray tracing method is unusable to determine ray path parameters of segments with varying core cross sections, e.g. tapers, crossings, splitters and combiners.","lang":"eng"}],"department":[{"_id":"DEP5020"},{"_id":"DEP6020"}],"conference":{"name":" XV. Optical Interconnects","location":"San Francisco","end_date":"2015-02-12","start_date":"2015-02-07"},"intvolume":" 9368","user_id":"51864","type":"conference","_id":"10224","doi":"10.1117/12.2076931","article_number":"936804","place":"Bellingham, Wash.","volume":9368,"citation":{"ufg":"Stübbe, Oliver: Semi-analytic ray tracing method for time-efficient computing of transmission behavior of PCB level optical interconnects with varying core cross sections, in: Schröder, Henning/Chen, Ray T. (Hgg.): Optical Interconnects XVII, Bd. 9368, Bellingham, Wash. 2015 (Proceedings of SPIE).","mla":"Stübbe, Oliver. “Semi-Analytic Ray Tracing Method for Time-Efficient Computing of Transmission Behavior of PCB Level Optical Interconnects with Varying Core Cross Sections.” Optical Interconnects XVII, edited by Henning Schröder and Ray T. Chen, vol. 9368, 936804, SPIE, 2015, https://doi.org/10.1117/12.2076931.","havard":"O. Stübbe, Semi-analytic ray tracing method for time-efficient computing of transmission behavior of PCB level optical interconnects with varying core cross sections, in: H. Schröder, R.T. Chen (Eds.), Optical Interconnects XVII, SPIE, Bellingham, Wash., 2015.","bjps":"Stübbe O (2015) Semi-Analytic Ray Tracing Method for Time-Efficient Computing of Transmission Behavior of PCB Level Optical Interconnects with Varying Core Cross Sections. In Schröder H and Chen RT (eds), Optical Interconnects XVII, vol. 9368. Bellingham, Wash.: SPIE.","van":"Stübbe O. Semi-analytic ray tracing method for time-efficient computing of transmission behavior of PCB level optical interconnects with varying core cross sections. In: Schröder H, Chen RT, editors. Optical Interconnects XVII. Bellingham, Wash.: SPIE; 2015. (Proceedings of SPIE; vol. 9368).","ama":"Stübbe O. Semi-analytic ray tracing method for time-efficient computing of transmission behavior of PCB level optical interconnects with varying core cross sections. In: Schröder H, Chen RT, eds. Optical Interconnects XVII. Vol 9368. Proceedings of SPIE. SPIE; 2015. doi:10.1117/12.2076931","chicago":"Stübbe, Oliver. “Semi-Analytic Ray Tracing Method for Time-Efficient Computing of Transmission Behavior of PCB Level Optical Interconnects with Varying Core Cross Sections.” In Optical Interconnects XVII, edited by Henning Schröder and Ray T. Chen, Vol. 9368. Proceedings of SPIE. Bellingham, Wash.: SPIE, 2015. https://doi.org/10.1117/12.2076931.","apa":"Stübbe, O. (2015). Semi-analytic ray tracing method for time-efficient computing of transmission behavior of PCB level optical interconnects with varying core cross sections. In H. Schröder & R. T. Chen (Eds.), Optical Interconnects XVII (No. 936804; Vol. 9368). SPIE. https://doi.org/10.1117/12.2076931","ieee":"O. Stübbe, “Semi-analytic ray tracing method for time-efficient computing of transmission behavior of PCB level optical interconnects with varying core cross sections,” in Optical Interconnects XVII, San Francisco, 2015, vol. 9368. doi: 10.1117/12.2076931.","din1505-2-1":"Stübbe, Oliver: Semi-analytic ray tracing method for time-efficient computing of transmission behavior of PCB level optical interconnects with varying core cross sections. In: Schröder, H. ; Chen, R. T. (Hrsg.): Optical Interconnects XVII, Proceedings of SPIE. Bd. 9368. Bellingham, Wash. : SPIE, 2015","chicago-de":"Stübbe, Oliver. 2015. Semi-analytic ray tracing method for time-efficient computing of transmission behavior of PCB level optical interconnects with varying core cross sections. In: Optical Interconnects XVII, hg. von Henning Schröder und Ray T. Chen, 9368:. Proceedings of SPIE. Bellingham, Wash.: SPIE. doi:10.1117/12.2076931, .","short":"O. Stübbe, in: H. Schröder, R.T. Chen (Eds.), Optical Interconnects XVII, SPIE, Bellingham, Wash., 2015."},"title":"Semi-analytic ray tracing method for time-efficient computing of transmission behavior of PCB level optical interconnects with varying core cross sections","status":"public","year":"2015","author":[{"orcid":"https://orcid.org/0000-0001-7293-6893","first_name":"Oliver","full_name":"Stübbe, Oliver","id":"51864","last_name":"Stübbe"}],"editor":[{"last_name":"Schröder","first_name":"Henning","full_name":"Schröder, Henning"},{"last_name":"Chen","first_name":"Ray T.","full_name":"Chen, Ray T."}],"date_updated":"2024-04-19T11:50:14Z","publication_identifier":{"issn":["0277-786X"]},"publication":"Optical Interconnects XVII","date_created":"2023-08-17T11:18:35Z","language":[{"iso":"eng"}]},{"department":[{"_id":"DEP5023"}],"year":2015,"author":[{"first_name":"Alexander","last_name":"Diedrich","full_name":"Diedrich, Alexander"},{"last_name":"Bunte","first_name":"Andreas","id":"58885","full_name":"Bunte, Andreas"},{"full_name":"Maier, Alexander","first_name":"Alexander","last_name":"Maier","id":"11158"},{"first_name":"Oliver","full_name":"Niggemann, Oliver","id":"10876","last_name":"Niggemann"}],"status":"public","title":"Kognitive Architektur zum Konzeptlernen in technischen Systemen","citation":{"ama":"Diedrich A, Bunte A, Maier A, Niggemann O. Kognitive Architektur zum Konzeptlernen in technischen Systemen. In: Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS). Lemgo, Germany; 2015.","ieee":"A. Diedrich, A. Bunte, A. Maier, and O. Niggemann, “Kognitive Architektur zum Konzeptlernen in technischen Systemen,” in Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS), 2015.","short":"A. Diedrich, A. Bunte, A. Maier, O. Niggemann, in: Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS), Lemgo, Germany, 2015.","din1505-2-1":"Diedrich, Alexander ; Bunte, Andreas ; Maier, Alexander ; Niggemann, Oliver: Kognitive Architektur zum Konzeptlernen in technischen Systemen. In: Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS). Lemgo, Germany, 2015","chicago-de":"Diedrich, Alexander, Andreas Bunte, Alexander Maier und Oliver Niggemann. 2015. Kognitive Architektur zum Konzeptlernen in technischen Systemen. In: Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS). Lemgo, Germany.","van":"Diedrich A, Bunte A, Maier A, Niggemann O. Kognitive Architektur zum Konzeptlernen in technischen Systemen. In: Machine Learning for Cyber Physical Systems and Industry 40 (ML4CPS). Lemgo, Germany; 2015.","havard":"A. Diedrich, A. Bunte, A. Maier, O. Niggemann, Kognitive Architektur zum Konzeptlernen in technischen Systemen, in: Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS), Lemgo, Germany, 2015.","bjps":"Diedrich A et al. (2015) Kognitive Architektur Zum Konzeptlernen in Technischen Systemen. Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS). Lemgo, Germany.","mla":"Diedrich, Alexander, et al. “Kognitive Architektur Zum Konzeptlernen in Technischen Systemen.” Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS), 2015.","ufg":"Diedrich, Alexander et. al. (2015): Kognitive Architektur zum Konzeptlernen in technischen Systemen, in: Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS), Lemgo, Germany.","apa":"Diedrich, A., Bunte, A., Maier, A., & Niggemann, O. (2015). Kognitive Architektur zum Konzeptlernen in technischen Systemen. In Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS). Lemgo, Germany.","chicago":"Diedrich, Alexander, Andreas Bunte, Alexander Maier, and Oliver Niggemann. “Kognitive Architektur Zum Konzeptlernen in Technischen Systemen.” In Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS). Lemgo, Germany, 2015."},"_id":"4793","language":[{"iso":"eng"}],"place":"Lemgo, Germany","date_created":"2021-02-02T08:36:53Z","type":"conference","publication":"Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS)","date_updated":"2023-03-15T13:49:55Z","user_id":"68554"},{"publication":"International Workshop on the Principles of Diagnosis (DX)","date_created":"2021-02-02T08:37:49Z","type":"conference","user_id":"68554","date_updated":"2023-03-15T13:49:55Z","place":"Paris, France","language":[{"iso":"eng"}],"_id":"4794","title":"Data-Driven Monitoring of Cyber-Physical Systems Leveraging on Big Data and the Internet-of-Things for Diagnosis and Control","citation":{"ama":"Niggemann O, Biswas G, Kinnebrew JS, Khorasgani H, Volgmann S, Bunte A. Data-Driven Monitoring of Cyber-Physical Systems Leveraging on Big Data and the Internet-of-Things for Diagnosis and Control. In: International Workshop on the Principles of Diagnosis (DX). Paris, France; 2015.","ieee":"O. Niggemann, G. Biswas, J. S. Kinnebrew, H. Khorasgani, S. Volgmann, and A. Bunte, “Data-Driven Monitoring of Cyber-Physical Systems Leveraging on Big Data and the Internet-of-Things for Diagnosis and Control,” in International Workshop on the Principles of Diagnosis (DX), 2015.","ufg":"Niggemann, Oliver et. al. (2015): Data-Driven Monitoring of Cyber-Physical Systems Leveraging on Big Data and the Internet-of-Things for Diagnosis and Control, in: International Workshop on the Principles of Diagnosis (DX), Paris, France.","havard":"O. Niggemann, G. Biswas, J.S. Kinnebrew, H. Khorasgani, S. Volgmann, A. Bunte, Data-Driven Monitoring of Cyber-Physical Systems Leveraging on Big Data and the Internet-of-Things for Diagnosis and Control, in: International Workshop on the Principles of Diagnosis (DX), Paris, France, 2015.","mla":"Niggemann, Oliver, et al. “Data-Driven Monitoring of Cyber-Physical Systems Leveraging on Big Data and the Internet-of-Things for Diagnosis and Control.” International Workshop on the Principles of Diagnosis (DX), 2015.","bjps":"Niggemann O et al. (2015) Data-Driven Monitoring of Cyber-Physical Systems Leveraging on Big Data and the Internet-of-Things for Diagnosis and Control. International Workshop on the Principles of Diagnosis (DX). Paris, France.","van":"Niggemann O, Biswas G, Kinnebrew JS, Khorasgani H, Volgmann S, Bunte A. Data-Driven Monitoring of Cyber-Physical Systems Leveraging on Big Data and the Internet-of-Things for Diagnosis and Control. In: International Workshop on the Principles of Diagnosis (DX). Paris, France; 2015.","chicago":"Niggemann, Oliver, Gautam Biswas, John S. Kinnebrew, Hamed Khorasgani, Sören Volgmann, and Andreas Bunte. “Data-Driven Monitoring of Cyber-Physical Systems Leveraging on Big Data and the Internet-of-Things for Diagnosis and Control.” In International Workshop on the Principles of Diagnosis (DX). Paris, France, 2015.","apa":"Niggemann, O., Biswas, G., Kinnebrew, J. S., Khorasgani, H., Volgmann, S., & Bunte, A. (2015). Data-Driven Monitoring of Cyber-Physical Systems Leveraging on Big Data and the Internet-of-Things for Diagnosis and Control. In International Workshop on the Principles of Diagnosis (DX). Paris, France.","chicago-de":"Niggemann, Oliver, Gautam Biswas, John S. Kinnebrew, Hamed Khorasgani, Sören Volgmann und Andreas Bunte. 2015. Data-Driven Monitoring of Cyber-Physical Systems Leveraging on Big Data and the Internet-of-Things for Diagnosis and Control. In: International Workshop on the Principles of Diagnosis (DX). Paris, France.","din1505-2-1":"Niggemann, Oliver ; Biswas, Gautam ; Kinnebrew, John S. ; Khorasgani, Hamed ; Volgmann, Sören ; Bunte, Andreas: Data-Driven Monitoring of Cyber-Physical Systems Leveraging on Big Data and the Internet-of-Things for Diagnosis and Control. In: International Workshop on the Principles of Diagnosis (DX). Paris, France, 2015","short":"O. Niggemann, G. Biswas, J.S. Kinnebrew, H. Khorasgani, S. Volgmann, A. Bunte, in: International Workshop on the Principles of Diagnosis (DX), Paris, France, 2015."},"author":[{"full_name":"Niggemann, Oliver","first_name":"Oliver","last_name":"Niggemann","id":"10876"},{"full_name":"Biswas, Gautam","last_name":"Biswas","first_name":"Gautam"},{"first_name":"John S.","last_name":"Kinnebrew","full_name":"Kinnebrew, John S."},{"first_name":"Hamed","last_name":"Khorasgani","full_name":"Khorasgani, Hamed"},{"full_name":"Volgmann, Sören","first_name":"Sören","last_name":"Volgmann"},{"last_name":"Bunte","id":"58885","full_name":"Bunte, Andreas","first_name":"Andreas"}],"year":2015,"department":[{"_id":"DEP5023"}],"status":"public"},{"author":[{"full_name":"Böttcher, Björn","first_name":"Björn","last_name":"Böttcher"},{"first_name":"Natalia","id":"44238","last_name":"Moriz","full_name":"Moriz, Natalia"},{"last_name":"Niggemann","first_name":"Oliver","full_name":"Niggemann, Oliver","id":"10876"}],"year":2015,"department":[{"_id":"DEP5023"}],"status":"public","publisher":"VDI-Verlag","title":"Intelligente Entwurfsassistenz für Automatisierungssysteme - Vorteile deklarativer Paradigmen im Systementwurf","citation":{"short":"B. Böttcher, N. Moriz, O. Niggemann, in: Automation 2015, VDI-Verlag, Baden-Baden, 2015.","din1505-2-1":"Böttcher, Björn ; Moriz, Natalia ; Niggemann, Oliver: Intelligente Entwurfsassistenz für Automatisierungssysteme - Vorteile deklarativer Paradigmen im Systementwurf. In: Automation 2015. Baden-Baden : VDI-Verlag, 2015","chicago-de":"Böttcher, Björn, Natalia Moriz und Oliver Niggemann. 2015. Intelligente Entwurfsassistenz für Automatisierungssysteme - Vorteile deklarativer Paradigmen im Systementwurf. In: Automation 2015. Baden-Baden: VDI-Verlag.","van":"Böttcher B, Moriz N, Niggemann O. Intelligente Entwurfsassistenz für Automatisierungssysteme - Vorteile deklarativer Paradigmen im Systementwurf. In: Automation 2015. Baden-Baden: VDI-Verlag; 2015.","mla":"Böttcher, Björn, et al. “Intelligente Entwurfsassistenz für Automatisierungssysteme - Vorteile deklarativer Paradigmen im Systementwurf.” Automation 2015, VDI-Verlag, 2015.","havard":"B. Böttcher, N. Moriz, O. Niggemann, Intelligente Entwurfsassistenz für Automatisierungssysteme - Vorteile deklarativer Paradigmen im Systementwurf, in: Automation 2015, VDI-Verlag, Baden-Baden, 2015.","bjps":"Böttcher B, Moriz N and Niggemann O (2015) Intelligente Entwurfsassistenz für Automatisierungssysteme - Vorteile deklarativer Paradigmen im Systementwurf. Automation 2015. Baden-Baden: VDI-Verlag.","ufg":"Böttcher, Björn et. al. (2015): Intelligente Entwurfsassistenz für Automatisierungssysteme - Vorteile deklarativer Paradigmen im Systementwurf, in: Automation 2015, Baden-Baden.","apa":"Böttcher, B., Moriz, N., & Niggemann, O. (2015). Intelligente Entwurfsassistenz für Automatisierungssysteme - Vorteile deklarativer Paradigmen im Systementwurf. In Automation 2015. Baden-Baden: VDI-Verlag.","chicago":"Böttcher, Björn, Natalia Moriz, and Oliver Niggemann. “Intelligente Entwurfsassistenz für Automatisierungssysteme - Vorteile deklarativer Paradigmen im Systementwurf.” In Automation 2015. Baden-Baden: VDI-Verlag, 2015.","ama":"Böttcher B, Moriz N, Niggemann O. Intelligente Entwurfsassistenz für Automatisierungssysteme - Vorteile deklarativer Paradigmen im Systementwurf. In: Automation 2015. Baden-Baden: VDI-Verlag; 2015.","ieee":"B. Böttcher, N. Moriz, and O. Niggemann, “Intelligente Entwurfsassistenz für Automatisierungssysteme - Vorteile deklarativer Paradigmen im Systementwurf,” in Automation 2015, 2015."},"place":"Baden-Baden","language":[{"iso":"ger"}],"_id":"4802","publication":"Automation 2015","type":"conference","date_created":"2021-02-02T09:08:09Z","user_id":"68554","date_updated":"2023-03-15T13:49:55Z"},{"user_id":"83781","intvolume":" 3","type":"book","place":"München","_id":"4901","publication_status":"published","series_title":"Grundgebiete der Elektrotechnik","publisher":"Carl Hanser Verlag","department":[{"_id":"DEP6020"}],"date_updated":"2024-03-22T12:33:01Z","date_created":"2021-02-08T11:02:45Z","publication_identifier":{"eissn":["978-3-446-44337-2 "],"isbn":["978-3-446-44268-9"]},"edition":"3","language":[{"iso":"ger"}],"citation":{"short":"A. Borcherding, K. Heidemann, W. Nerreter, Aufgaben : 120 Aufgaben mit Lösungen , 3rd ed., Carl Hanser Verlag, München, 2015.","chicago-de":"Borcherding, Arnold, Klaus Heidemann und Wolfgang Nerreter. 2015. Aufgaben : 120 Aufgaben mit Lösungen . 3. Aufl. Bd. 3. Grundgebiete der Elektrotechnik. München: Carl Hanser Verlag.","din1505-2-1":"Borcherding, Arnold ; Heidemann, Klaus ; Nerreter, Wolfgang: Aufgaben : 120 Aufgaben mit Lösungen , Grundgebiete der Elektrotechnik. Bd. 3. 3. Aufl. München : Carl Hanser Verlag, 2015","van":"Borcherding A, Heidemann K, Nerreter W. Aufgaben : 120 Aufgaben mit Lösungen . 3rd ed. München: Carl Hanser Verlag; 2015. 159 p. (Grundgebiete der Elektrotechnik; vol. 3).","ama":"Borcherding A, Heidemann K, Nerreter W. Aufgaben : 120 Aufgaben mit Lösungen . Vol 3. 3rd ed. Carl Hanser Verlag; 2015.","ufg":"Borcherding, Arnold/Heidemann, Klaus/Nerreter, Wolfgang: Aufgaben : 120 Aufgaben mit Lösungen , Bd. 3, München 32015 (Grundgebiete der Elektrotechnik).","havard":"A. Borcherding, K. Heidemann, W. Nerreter, Aufgaben : 120 Aufgaben mit Lösungen , 3rd ed., Carl Hanser Verlag, München, 2015.","mla":"Borcherding, Arnold, et al. Aufgaben : 120 Aufgaben mit Lösungen . 3rd ed., vol. 3, Carl Hanser Verlag, 2015.","bjps":"Borcherding A, Heidemann K and Nerreter W (2015) Aufgaben : 120 Aufgaben mit Lösungen , 3rd ed. München: Carl Hanser Verlag.","apa":"Borcherding, A., Heidemann, K., & Nerreter, W. (2015). Aufgaben : 120 Aufgaben mit Lösungen (3rd ed., Vol. 3). Carl Hanser Verlag.","ieee":"A. Borcherding, K. Heidemann, and W. Nerreter, Aufgaben : 120 Aufgaben mit Lösungen , 3rd ed., vol. 3. München: Carl Hanser Verlag, 2015.","chicago":"Borcherding, Arnold, Klaus Heidemann, and Wolfgang Nerreter. Aufgaben : 120 Aufgaben mit Lösungen . 3rd ed. Vol. 3. Grundgebiete der Elektrotechnik. München: Carl Hanser Verlag, 2015."},"volume":3,"title":"Aufgaben : 120 Aufgaben mit Lösungen ","page":"159","status":"public","author":[{"full_name":"Borcherding, Arnold","last_name":"Borcherding","first_name":"Arnold"},{"full_name":"Heidemann, Klaus","last_name":"Heidemann","first_name":"Klaus"},{"first_name":"Wolfgang","last_name":"Nerreter","full_name":"Nerreter, Wolfgang","id":"56893"}],"year":"2015"},{"publication_status":"published","citation":{"ama":"Pottgiesser U. Baukonstruktion - Innenausbau. In: Holschemacher K, ed. Entwurfs- und Konstruktionstafeln für Architekten . 7., aktualisierte Auflage. Berlin: Beuth; 2015:Kapitel 2C: 2.49-2.82.","ieee":"U. Pottgiesser, “Baukonstruktion - Innenausbau,” in Entwurfs- und Konstruktionstafeln für Architekten , 7., aktualisierte Auflage., K. Holschemacher, Ed. Berlin: Beuth, 2015, p. Kapitel 2C: 2.49-2.82.","van":"Pottgiesser U. Baukonstruktion - Innenausbau. In: Holschemacher K, editor. Entwurfs- und Konstruktionstafeln für Architekten . 7., aktualisierte Auflage. Berlin: Beuth; 2015. p. Kapitel 2C: 2.49-2.82.","ufg":"Pottgiesser, Uta (2015): Baukonstruktion - Innenausbau, in: K. Holschemacher (Hg.): Entwurfs- und Konstruktionstafeln für Architekten , Berlin, 7., aktualisierte Auflage, S. Kapitel 2C: 2.49-2.82.","mla":"Pottgiesser, Uta. “Baukonstruktion - Innenausbau.” Entwurfs- und Konstruktionstafeln für Architekten , edited by K. Holschemacher, 7., aktualisierte Auflage, Beuth, 2015, p. Kapitel 2C: 2.49-2.82.","bjps":"Pottgiesser U (2015) Baukonstruktion - Innenausbau. In Holschemacher K (ed.), Entwurfs- und Konstruktionstafeln für Architekten , 7., aktualisierte Auflage. Berlin: Beuth, p. Kapitel 2C: 2.49-2.82.","havard":"U. Pottgiesser, Baukonstruktion - Innenausbau, in: K. Holschemacher (Ed.), Entwurfs- und Konstruktionstafeln für Architekten , 7., aktualisierte Auflage, Beuth, Berlin, 2015: p. Kapitel 2C: 2.49-2.82.","apa":"Pottgiesser, U. (2015). Baukonstruktion - Innenausbau. In K. Holschemacher (Ed.), Entwurfs- und Konstruktionstafeln für Architekten (7., aktualisierte Auflage, p. Kapitel 2C: 2.49-2.82). Berlin: Beuth.","chicago":"Pottgiesser, Uta. “Baukonstruktion - Innenausbau.” In Entwurfs- und Konstruktionstafeln für Architekten , edited by K. Holschemacher, 7., aktualisierte Auflage., Kapitel 2C: 2.49-2.82. Berlin: Beuth, 2015.","short":"U. Pottgiesser, in: K. Holschemacher (Ed.), Entwurfs- und Konstruktionstafeln für Architekten , 7., aktualisierte Auflage, Beuth, Berlin, 2015, p. Kapitel 2C: 2.49-2.82.","chicago-de":"Pottgiesser, Uta. 2015. Baukonstruktion - Innenausbau. In: Entwurfs- und Konstruktionstafeln für Architekten , hg. von K. Holschemacher, Kapitel 2C: 2.49-2.82. 7., aktualisierte Auflage. Berlin: Beuth.","din1505-2-1":"Pottgiesser, Uta: Baukonstruktion - Innenausbau. In: Holschemacher, K. (Hrsg.): Entwurfs- und Konstruktionstafeln für Architekten . 7., aktualisierte Auflage. Berlin : Beuth, 2015, S. Kapitel 2C: 2.49-2.82"},"title":"Baukonstruktion - Innenausbau","publisher":"Beuth","page":"Kapitel 2C: 2.49-2.82","status":"public","department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"year":2015,"author":[{"first_name":"Uta","full_name":"Pottgiesser, Uta","last_name":"Pottgiesser","id":"27166","orcid":"0000-0002-8594-3168"}],"editor":[{"full_name":"Holschemacher, K.","last_name":"Holschemacher","first_name":"K."}],"date_updated":"2023-03-15T13:49:58Z","user_id":"45673","edition":"7., aktualisierte Auflage ","date_created":"2021-03-04T14:00:42Z","type":"book_chapter","publication_identifier":{"isbn":[" 978-3-410-25040-1 "],"eisbn":["978-3-410-25041-8 "]},"publication":"Entwurfs- und Konstruktionstafeln für Architekten ","_id":"5214","language":[{"iso":"ger"}],"place":"Berlin"},{"publication_status":"published","citation":{"din1505-2-1":"Pottgiesser, Uta: Konzepte statt Prognosen. In: Heusler, W. (Hrsg.): Zukunftsstadt 2050 : Futury City 2050 . München, 2015","chicago-de":"Pottgiesser, Uta. 2015. Konzepte statt Prognosen. In: Zukunftsstadt 2050 : Futury City 2050 , hg. von Winfried Heusler. München.","short":"U. Pottgiesser, in: W. Heusler (Ed.), Zukunftsstadt 2050 : Futury City 2050 , München, 2015.","mla":"Pottgiesser, Uta. “Konzepte statt Prognosen.” Zukunftsstadt 2050 : Futury City 2050 , edited by Winfried Heusler, 2015.","havard":"U. Pottgiesser, Konzepte statt Prognosen, in: W. Heusler (Ed.), Zukunftsstadt 2050 : Futury City 2050 , München, 2015.","bjps":"Pottgiesser U (2015) Konzepte statt Prognosen. In Heusler W (ed.), Zukunftsstadt 2050 : Futury City 2050 . München.","ufg":"Pottgiesser, Uta (2015): Konzepte statt Prognosen, in: Winfried Heusler (Hg.): Zukunftsstadt 2050 : Futury City 2050 , München.","van":"Pottgiesser U. Konzepte statt Prognosen. In: Heusler W, editor. Zukunftsstadt 2050 : Futury City 2050 . München; 2015.","chicago":"Pottgiesser, Uta. “Konzepte statt Prognosen.” In Zukunftsstadt 2050 : Futury City 2050 , edited by Winfried Heusler. München, 2015.","apa":"Pottgiesser, U. (2015). Konzepte statt Prognosen. In W. Heusler (Ed.), Zukunftsstadt 2050 : Futury City 2050 . München.","ama":"Pottgiesser U. Konzepte statt Prognosen. In: Heusler W, ed. Zukunftsstadt 2050 : Futury City 2050 . München; 2015.","ieee":"U. Pottgiesser, “Konzepte statt Prognosen,” in Zukunftsstadt 2050 : Futury City 2050 , W. Heusler, Ed. München, 2015."},"title":"Konzepte statt Prognosen","status":"public","department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"year":2015,"author":[{"orcid":"0000-0002-8594-3168","full_name":"Pottgiesser, Uta","first_name":"Uta","id":"27166","last_name":"Pottgiesser"}],"date_updated":"2023-03-15T13:49:58Z","user_id":"45673","editor":[{"full_name":"Heusler, Winfried","first_name":"Winfried","last_name":"Heusler"}],"date_created":"2021-03-04T14:18:44Z","type":"book_chapter","publication":"Zukunftsstadt 2050 : Futury City 2050 ","language":[{"iso":"ger"}],"place":"München","_id":"5219"},{"abstract":[{"text":"Many workspaces in open-plan offices suffer from high noise levels and undesired transmissions of speech noise between the users. These are leading to increased distraction by irrelevant speech information. This acoustical overall situation has serious consequences for the working environment: concentration- and performance loss as well as impairments of mood and well-being. Surveys on disturbing sounds have proven that human language distracts much more than sounds that are generated by natural sources or technical devices. Especially in times of changing working structures, when flexible spaces promoting interaction gain an increasing importance, room acoustics have to ensure that all negative impairments caused by noise and speech sound are prevented. Different measures and concepts come into question for acoustical optimization: absorption, shielding and sound-masking. Absorption can be achieved by means of acoustically-effective ceilings, floorings or furniture although these singular measures are often not sufficient. Sophisticated sound-absorbing systems are in the market. To reduce disturbing speech information sufficiently, advanced sound-shielding measures between the working areas are required. To efficiently prevent speech-like noise an adaptive sound-masking system in combination with visually adapted shielding elements should be developed, tested and implemented for open-plan offices in the presented research. The studies have shown that the design of these absorbing and shielding elements is a relevant factor as any conformity between spatial design and sound helps to improve the user acceptance. It was further verified by tests that permanent movements in the peripheral field of vision of the test persons were perceived as distracting and annoying. Thus the sound-masking was placed outside the field of vision. In general the user acceptance of masking sounds was assessed more positively when combined with a visualisation (e.g. covering with „leaves“) compared to the variant without any covering. But the whole system has to be further developed.","lang":"eng"}],"author":[{"last_name":"Pottgiesser","full_name":"Pottgiesser, Uta","first_name":"Uta","id":"27166","orcid":"0000-0002-8594-3168"},{"first_name":"Christoph","last_name":"Kirch","full_name":"Kirch, Christoph"}],"year":2015,"conference":{"start_date":"2015-09-09","end_date":"2015-09-11","name":"31st International PLEA Conference","location":"Bologna"},"department":[{"_id":"DEP1020"},{"_id":"DEP1302"},{"_id":"DEP1055"}],"publisher":" [Ass. Building Green Futures]","quality_controlled":"1","status":"public","title":"Improving Room Acoustics in open-plan Offices. Testing the Relationship of acoustical and visual Distraction at Workspaces with sound-masking Systems","citation":{"ama":"Pottgiesser U, Kirch C. Improving Room Acoustics in open-plan Offices. Testing the Relationship of acoustical and visual Distraction at Workspaces with sound-masking Systems. In: Conference: 31st International PLEA ConferenceAt: BolognaVolume: Proceedings of PLEA2015 Architecture in (R)Evolution - Book of Abstracts. [Bologna] : [Ass. Building Green Futures]; 2015.","van":"Pottgiesser U, Kirch C. Improving Room Acoustics in open-plan Offices. Testing the Relationship of acoustical and visual Distraction at Workspaces with sound-masking Systems. In: Conference: 31st International PLEA ConferenceAt: BolognaVolume: Proceedings of PLEA2015 Architecture in (R)Evolution - Book of Abstracts. [Bologna] : [Ass. Building Green Futures]; 2015.","mla":"Pottgiesser, Uta, and Christoph Kirch. “Improving Room Acoustics in Open-Plan Offices. Testing the Relationship of Acoustical and Visual Distraction at Workspaces with Sound-Masking Systems.” Conference: 31st International PLEA ConferenceAt: BolognaVolume: Proceedings of PLEA2015 Architecture in (R)Evolution - Book of Abstracts., [Ass. Building Green Futures], 2015.","havard":"U. Pottgiesser, C. Kirch, Improving Room Acoustics in open-plan Offices. Testing the Relationship of acoustical and visual Distraction at Workspaces with sound-masking Systems, in: Conference: 31st International PLEA ConferenceAt: BolognaVolume: Proceedings of PLEA2015 Architecture in (R)Evolution - Book of Abstracts., [Ass. Building Green Futures], [Bologna] , 2015.","bjps":"Pottgiesser U and Kirch C (2015) Improving Room Acoustics in Open-Plan Offices. Testing the Relationship of Acoustical and Visual Distraction at Workspaces with Sound-Masking Systems. Conference: 31st International PLEA ConferenceAt: BolognaVolume: Proceedings of PLEA2015 Architecture in (R)Evolution - Book of Abstracts. [Bologna] : [Ass. Building Green Futures].","ufg":"Pottgiesser, Uta/Kirch, Christoph (2015): Improving Room Acoustics in open-plan Offices. Testing the Relationship of acoustical and visual Distraction at Workspaces with sound-masking Systems, in: Conference: 31st International PLEA ConferenceAt: BolognaVolume: Proceedings of PLEA2015 Architecture in (R)Evolution - Book of Abstracts., [Bologna] .","ieee":"U. Pottgiesser and C. Kirch, “Improving Room Acoustics in open-plan Offices. Testing the Relationship of acoustical and visual Distraction at Workspaces with sound-masking Systems,” in Conference: 31st International PLEA ConferenceAt: BolognaVolume: Proceedings of PLEA2015 Architecture in (R)Evolution - Book of Abstracts., Bologna, 2015.","apa":"Pottgiesser, U., & Kirch, C. (2015). Improving Room Acoustics in open-plan Offices. Testing the Relationship of acoustical and visual Distraction at Workspaces with sound-masking Systems. In Conference: 31st International PLEA ConferenceAt: BolognaVolume: Proceedings of PLEA2015 Architecture in (R)Evolution - Book of Abstracts. [Bologna] : [Ass. Building Green Futures].","chicago":"Pottgiesser, Uta, and Christoph Kirch. “Improving Room Acoustics in Open-Plan Offices. Testing the Relationship of Acoustical and Visual Distraction at Workspaces with Sound-Masking Systems.” In Conference: 31st International PLEA ConferenceAt: BolognaVolume: Proceedings of PLEA2015 Architecture in (R)Evolution - Book of Abstracts. [Bologna] : [Ass. Building Green Futures], 2015.","short":"U. Pottgiesser, C. Kirch, in: Conference: 31st International PLEA ConferenceAt: BolognaVolume: Proceedings of PLEA2015 Architecture in (R)Evolution - Book of Abstracts., [Ass. Building Green Futures], [Bologna] , 2015.","chicago-de":"Pottgiesser, Uta und Christoph Kirch. 2015. Improving Room Acoustics in open-plan Offices. Testing the Relationship of acoustical and visual Distraction at Workspaces with sound-masking Systems. In: Conference: 31st International PLEA ConferenceAt: BolognaVolume: Proceedings of PLEA2015 Architecture in (R)Evolution - Book of Abstracts. [Bologna] : [Ass. Building Green Futures].","din1505-2-1":"Pottgiesser, Uta ; Kirch, Christoph: Improving Room Acoustics in open-plan Offices. Testing the Relationship of acoustical and visual Distraction at Workspaces with sound-masking Systems. In: Conference: 31st International PLEA ConferenceAt: BolognaVolume: Proceedings of PLEA2015 Architecture in (R)Evolution - Book of Abstracts.. [Bologna] : [Ass. Building Green Futures], 2015"},"publication_status":"published","_id":"5292","place":"[Bologna] ","language":[{"iso":"eng"}],"publication":"Conference: 31st International PLEA ConferenceAt: BolognaVolume: Proceedings of PLEA2015 Architecture in (R)Evolution - Book of Abstracts.","publication_identifier":{"isbn":["978-88-941163-0-4"]},"date_created":"2021-03-12T07:28:43Z","type":"conference","user_id":"45673","date_updated":"2023-03-15T13:49:58Z"},{"language":[{"iso":"eng"}],"_id":"6453","date_created":"2021-09-21T08:14:06Z","type":"conference","date_updated":"2024-05-22T06:34:43Z","user_id":"83779","conference":{"location":"Ghent (Belgium)","name":"11th International Trends in Brewing","start_date":"2014-04-13","end_date":"2014-04-17"},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"},{"_id":"DEP4018"}],"author":[{"orcid":"0000-0001-6401-8873","full_name":"Schneider, Jan","last_name":"Schneider","id":"13209","first_name":"Jan"},{"id":"13329","last_name":"Schwarzer","first_name":"Knut","full_name":"Schwarzer, Knut"},{"full_name":"Dammann_, Anna","id":"43899","last_name":"Dammann_","first_name":"Anna"},{"last_name":"Müller","id":"12119","full_name":"Müller, Ulrich","first_name":"Ulrich"}],"year":"2014","status":"public","title":"Effect of the residence time distribution in flash pasteurizers on the thermal death of microorganism under consideration of the heating and cooling sections","citation":{"chicago":"Schneider, Jan, Knut Schwarzer, Anna Dammann_, and Ulrich Müller. “Effect of the Residence Time Distribution in Flash Pasteurizers on the Thermal Death of Microorganism under Consideration of the Heating and Cooling Sections,” 2014.","ieee":"J. Schneider, K. Schwarzer, A. Dammann_, and U. Müller, “Effect of the residence time distribution in flash pasteurizers on the thermal death of microorganism under consideration of the heating and cooling sections,” presented at the 11th International Trends in Brewing, Ghent (Belgium), 2014.","apa":"Schneider, J., Schwarzer, K., Dammann_, A., & Müller, U. (2014). Effect of the residence time distribution in flash pasteurizers on the thermal death of microorganism under consideration of the heating and cooling sections. 11th International Trends in Brewing, Ghent (Belgium).","bjps":"Schneider J et al. (2014) Effect of the Residence Time Distribution in Flash Pasteurizers on the Thermal Death of Microorganism under Consideration of the Heating and Cooling Sections.","havard":"J. Schneider, K. Schwarzer, A. Dammann_, U. Müller, Effect of the residence time distribution in flash pasteurizers on the thermal death of microorganism under consideration of the heating and cooling sections, in: 2014.","mla":"Schneider, Jan, et al. Effect of the Residence Time Distribution in Flash Pasteurizers on the Thermal Death of Microorganism under Consideration of the Heating and Cooling Sections. 2014.","ufg":"Schneider, Jan u. a.: Effect of the residence time distribution in flash pasteurizers on the thermal death of microorganism under consideration of the heating and cooling sections, in: o. Hg.: o. O. 2014.","ama":"Schneider J, Schwarzer K, Dammann_ A, Müller U. Effect of the residence time distribution in flash pasteurizers on the thermal death of microorganism under consideration of the heating and cooling sections. In: ; 2014.","van":"Schneider J, Schwarzer K, Dammann_ A, Müller U. Effect of the residence time distribution in flash pasteurizers on the thermal death of microorganism under consideration of the heating and cooling sections. In 2014.","chicago-de":"Schneider, Jan, Knut Schwarzer, Anna Dammann_ und Ulrich Müller. 2014. Effect of the residence time distribution in flash pasteurizers on the thermal death of microorganism under consideration of the heating and cooling sections. In: .","din1505-2-1":"Schneider, Jan ; Schwarzer, Knut ; Dammann_, Anna ; Müller, Ulrich: Effect of the residence time distribution in flash pasteurizers on the thermal death of microorganism under consideration of the heating and cooling sections. In: , 2014","short":"J. Schneider, K. Schwarzer, A. Dammann_, U. Müller, in: 2014."}},{"citation":{"ama":"Müller U. Entkeimungsverfahren und biologische Stabilisierung von Lebensmitteln – Behandlungsverfahren für fluide und feste Substanzen aus Sicht eines Lebensmittelverfahrenstechnikers. In: ; 2014.","ieee":"U. Müller, “Entkeimungsverfahren und biologische Stabilisierung von Lebensmitteln – Behandlungsverfahren für fluide und feste Substanzen aus Sicht eines Lebensmittelverfahrenstechnikers,” presented at the GDL- Kongress, Rodgau, 2014.","ufg":"Müller, Ulrich (2014): Entkeimungsverfahren und biologische Stabilisierung von Lebensmitteln – Behandlungsverfahren für fluide und feste Substanzen aus Sicht eines Lebensmittelverfahrenstechnikers, in: .","havard":"U. Müller, Entkeimungsverfahren und biologische Stabilisierung von Lebensmitteln – Behandlungsverfahren für fluide und feste Substanzen aus Sicht eines Lebensmittelverfahrenstechnikers, in: 2014.","mla":"Müller, Ulrich. Entkeimungsverfahren Und Biologische Stabilisierung von Lebensmitteln – Behandlungsverfahren Für Fluide Und Feste Substanzen Aus Sicht Eines Lebensmittelverfahrenstechnikers. 2014.","bjps":"Müller U (2014) Entkeimungsverfahren Und Biologische Stabilisierung von Lebensmitteln – Behandlungsverfahren Für Fluide Und Feste Substanzen Aus Sicht Eines Lebensmittelverfahrenstechnikers.","van":"Müller U. Entkeimungsverfahren und biologische Stabilisierung von Lebensmitteln – Behandlungsverfahren für fluide und feste Substanzen aus Sicht eines Lebensmittelverfahrenstechnikers. In 2014.","chicago":"Müller, Ulrich. “Entkeimungsverfahren Und Biologische Stabilisierung von Lebensmitteln – Behandlungsverfahren Für Fluide Und Feste Substanzen Aus Sicht Eines Lebensmittelverfahrenstechnikers,” 2014.","apa":"Müller, U. (2014). Entkeimungsverfahren und biologische Stabilisierung von Lebensmitteln – Behandlungsverfahren für fluide und feste Substanzen aus Sicht eines Lebensmittelverfahrenstechnikers. Presented at the GDL- Kongress, Rodgau.","din1505-2-1":"Müller, Ulrich: Entkeimungsverfahren und biologische Stabilisierung von Lebensmitteln – Behandlungsverfahren für fluide und feste Substanzen aus Sicht eines Lebensmittelverfahrenstechnikers. In: , 2014","chicago-de":"Müller, Ulrich. 2014. Entkeimungsverfahren und biologische Stabilisierung von Lebensmitteln – Behandlungsverfahren für fluide und feste Substanzen aus Sicht eines Lebensmittelverfahrenstechnikers. In: .","short":"U. Müller, in: 2014."},"title":"Entkeimungsverfahren und biologische Stabilisierung von Lebensmitteln – Behandlungsverfahren für fluide und feste Substanzen aus Sicht eines Lebensmittelverfahrenstechnikers","status":"public","conference":{"location":"Rodgau","name":"GDL- Kongress","end_date":"2014-10-18","start_date":"2014-10-16"},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"author":[{"full_name":"Müller, Ulrich","id":"12119","last_name":"Müller","first_name":"Ulrich"}],"year":2014,"date_updated":"2023-03-15T13:50:06Z","user_id":"45673","type":"conference","date_created":"2021-09-21T08:15:47Z","language":[{"iso":"eng"}],"_id":"6454"},{"date_updated":"2023-03-15T13:50:07Z","corporate_editor":["Department of Production Engineering and Management,","Hochschule Ostwestfalen-Lippe"],"editor":[{"last_name":"Villmer","full_name":"Villmer, Franz-Josef","first_name":"Franz-Josef"},{"last_name":"Padoano","full_name":"Padoano, Elio","first_name":"Elio"}],"publication":"Production Engineering and Management","date_created":"2019-01-16T16:07:56Z","keyword":["Assembly System","Versatility","Modularity"],"language":[{"iso":"eng"}],"oa":"1","citation":{"chicago":"Hinrichsen, Sven, Jürgen Jasperneite, Florian Schrader, and Benedikt Lücke. “Versatile Assembly Systems - Requirements, Design Principles and Examples.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 37–45. Lemgo: Hochschule Ostwestfalen-Lippe, 2014.","apa":"Hinrichsen, S., Jasperneite, J., Schrader, F., & Lücke, B. (2014). Versatile Assembly Systems - Requirements, Design Principles and Examples. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management, (Eds.), Production Engineering and Management (pp. 37–45). Lemgo: Hochschule Ostwestfalen-Lippe.","ieee":"S. Hinrichsen, J. Jasperneite, F. Schrader, and B. Lücke, “Versatile Assembly Systems - Requirements, Design Principles and Examples,” in Production Engineering and Management, Lemgo, 2014, no. 10, pp. 37–45.","ufg":"Hinrichsen, Sven et. al. (2014): Versatile Assembly Systems - Requirements, Design Principles and Examples, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 37–45.","havard":"S. Hinrichsen, J. Jasperneite, F. Schrader, B. Lücke, Versatile Assembly Systems - Requirements, Design Principles and Examples, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, (Eds.), Production Engineering and Management, Hochschule Ostwestfalen-Lippe, Lemgo, 2014: pp. 37–45.","mla":"Hinrichsen, Sven, et al. “Versatile Assembly Systems - Requirements, Design Principles and Examples.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 10, Hochschule Ostwestfalen-Lippe, 2014, pp. 37–45.","bjps":"Hinrichsen S et al. (2014) Versatile Assembly Systems - Requirements, Design Principles and Examples. In Villmer F-J, Padoano E and Department of Production Engineering and Management, (eds), Production Engineering and Management. Lemgo: Hochschule Ostwestfalen-Lippe, pp. 37–45.","van":"Hinrichsen S, Jasperneite J, Schrader F, Lücke B. Versatile Assembly Systems - Requirements, Design Principles and Examples. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo: Hochschule Ostwestfalen-Lippe; 2014. p. 37–45.","ama":"Hinrichsen S, Jasperneite J, Schrader F, Lücke B. Versatile Assembly Systems - Requirements, Design Principles and Examples. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo: Hochschule Ostwestfalen-Lippe; 2014:37-45.","din1505-2-1":"Hinrichsen, Sven ; Jasperneite, Jürgen ; Schrader, Florian ; Lücke, Benedikt: Versatile Assembly Systems - Requirements, Design Principles and Examples. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management, (Hrsg.): Production Engineering and Management. Lemgo : Hochschule Ostwestfalen-Lippe, 2014, S. 37–45","chicago-de":"Hinrichsen, Sven, Jürgen Jasperneite, Florian Schrader und Benedikt Lücke. 2014. Versatile Assembly Systems - Requirements, Design Principles and Examples. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 37–45. Lemgo: Hochschule Ostwestfalen-Lippe.","short":"S. Hinrichsen, J. Jasperneite, F. Schrader, B. Lücke, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, (Eds.), Production Engineering and Management, Hochschule Ostwestfalen-Lippe, Lemgo, 2014, pp. 37–45."},"title":"Versatile Assembly Systems - Requirements, Design Principles and Examples","status":"public","page":"37-45","year":2014,"author":[{"first_name":"Sven","last_name":"Hinrichsen","id":"49010","full_name":"Hinrichsen, Sven"},{"last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"},{"first_name":"Florian","last_name":"Schrader","full_name":"Schrader, Florian","id":"1937"},{"last_name":"Lücke","id":"11178","full_name":"Lücke, Benedikt","first_name":"Benedikt"}],"main_file_link":[{"open_access":"1","url":"https://www.hs-owl.de/fb7/fileadmin/download/labore/industrialengineering/pdf/Veroeffentlichungen/PEM_2014_Versatile_Assembly_Systems_-_Requirements__Design_Principles_and_Examples.pdf"}],"user_id":"49010","type":"conference","place":"Lemgo","_id":"665","publication_status":"published","publisher":"Hochschule Ostwestfalen-Lippe","quality_controlled":"1","department":[{"_id":"DEP7020"},{"_id":"DEP1305"},{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"location":"Lemgo","name":"Proceedings 4th international conference","start_date":"2014-09-25","end_date":"2014-09-26"},"abstract":[{"lang":"eng","text":"The requirements of assembly systems are changing, due to trends such as shorter innovation and product lifecycles as well as an increase in the number of product variants and product customization. Certain markets are characterized by demand volatility and short delivery schedules. As a result of shortened product and innovation lifecycles and demand volatility, the assembly system design should be versatile. The aim of this paper is to demonstrate a versatile assembly system which was jointly developed by the Fraunhofer IOSB-INA and the Ostwestfalen-Lippe University of Applied Sciences. "}],"issue":"10"},{"publication_status":"published","abstract":[{"lang":"ger","text":"Wie sehen die Fertigungssysteme von morgen aus? Und welche Art von Automation ist für deren Umsetzung nötig? Am Fraunhofer-Anwendungszentrum Industrial Automation (IOSB-INA) und dem Institut für industrielle Informationstechnik (inIT) der Hochschule Ostwestfalen-Lippe laufen Arbeiten, um die notwendige wandlungsfähige Automation von morgen umzusetzen. In Kooperation mit dem Labor für Industrial Engineering der Hochschule OWL ist ein wandlungsfähiges Montagesystem entstanden, welches in die SmartFactoryOWL integriert wird - eine Forschungsfabrik für die intelligente Automation und Arbeitssystemgestaltung."}],"issue":"4","department":[{"_id":"DEP7020"},{"_id":"DEP5023"},{"_id":"DEP5019"}],"publisher":"WEKA-Fachmedien","type":"journal_article","user_id":"45673","_id":"668","place":"Poing","title":"Das Chamäleon der Montage","citation":{"havard":"J. Jasperneite, S. Hinrichsen, Das Chamäleon der Montage, Computer & Automation. (2014) 30–33.","bjps":"Jasperneite J and Hinrichsen S (2014) Das Chamäleon der Montage. Computer & Automation 30–33.","mla":"Jasperneite, Jürgen, and Sven Hinrichsen. “Das Chamäleon der Montage.” Computer & Automation, no. 4, WEKA-Fachmedien, 2014, pp. 30–33.","ufg":"Jasperneite, Jürgen/Hinrichsen, Sven (2014): Das Chamäleon der Montage, in: Computer & Automation (4), S. 30–33.","ama":"Jasperneite J, Hinrichsen S. Das Chamäleon der Montage. Computer & Automation. 2014;(4):30-33.","van":"Jasperneite J, Hinrichsen S. Das Chamäleon der Montage. Computer & Automation. 2014;(4):30–3.","chicago":"Jasperneite, Jürgen, and Sven Hinrichsen. “Das Chamäleon der Montage.” Computer & Automation, no. 4 (2014): 30–33.","ieee":"J. Jasperneite and S. Hinrichsen, “Das Chamäleon der Montage,” Computer & Automation, no. 4, pp. 30–33, 2014.","apa":"Jasperneite, J., & Hinrichsen, S. (2014). Das Chamäleon der Montage. Computer & Automation, (4), 30–33.","chicago-de":"Jasperneite, Jürgen und Sven Hinrichsen. 2014. Das Chamäleon der Montage. Computer & Automation, Nr. 4: 30–33.","din1505-2-1":"Jasperneite, Jürgen ; Hinrichsen, Sven: Das Chamäleon der Montage. In: Computer & Automation. Poing, WEKA-Fachmedien (2014), Nr. 4, S. 30–33","short":"J. Jasperneite, S. Hinrichsen, Computer & Automation (2014) 30–33."},"author":[{"full_name":"Jasperneite, Jürgen","first_name":"Jürgen","id":"1899","last_name":"Jasperneite"},{"first_name":"Sven","last_name":"Hinrichsen","full_name":"Hinrichsen, Sven","id":"49010"}],"year":2014,"main_file_link":[{"url":"https://www.computer-automation.de/steuerungsebene/steuern-regeln/artikel/106827/","open_access":"1"}],"page":"30-33","status":"public","date_created":"2019-03-06T11:08:12Z","publication":"Computer & Automation","date_updated":"2023-03-15T13:50:07Z","related_material":{"link":[{"relation":"table_of_contents","url":"https://www.computer-automation.de/heftarchiv/ausgabe/58/"}]},"oa":"1","language":[{"iso":"ger"}],"keyword":["Automation","Fertigungssystem","Montage"]},{"status":"public","page":"35-45","year":2014,"author":[{"first_name":"Uwe","last_name":"Mönks","id":"1825","full_name":"Mönks, Uwe"},{"first_name":"Henning","id":"1486","last_name":"Trsek","full_name":"Trsek, Henning"},{"first_name":"Lars","full_name":"Dürkop, Lars","last_name":"Dürkop"},{"first_name":"Volker","full_name":"Geneiß, Volker","last_name":"Geneiß"},{"first_name":"Volker","full_name":"Lohweg, Volker","id":"1804","last_name":"Lohweg","orcid":"0000-0002-3325-7887"}],"main_file_link":[{"open_access":"1","url":"https://pdf.sciencedirectassets.com/282073/1-s2.0-S2212017314X00058/1-s2.0-S2212017314001479/main.pdf?X-Amz-Security-Token=IQoJb3JpZ2luX2VjEPn%2F%2F%2F%2F%2F%2F%2F%2F%2F%2FwEaCXVzLWVhc3QtMSJHMEUCIGIe7%2F5zncym9pR8cX4qmMNOUT%2FZIdLCI%2BxGI45FrjJIAiEAk6wKEeYxhTFqdQ2wonoGOXDk2rG5poEF644xs7vnLykq0AIIQhACGgwwNTkwMDM1NDY4NjUiDHXgN9QHtF1f%2FG%2FhLiqtAqrYPLg6w2%2F464tAFL1z6SJxq6YGGx1%2FseW%2Fggz0wNYn6uL9bTdorDrfKp6HWMBqlmENIVqjlal5w1%2F0yJpoj0aMAE377rbFURhIs5WFaTiH49MSY1RweIPrkEPlgfHOPuVFPjzGU1K2hiALoVQ9KIBvx8yBUclSCpX41Fi5iX%2BYFfzOd1839CXh9O6UPwomaFhBimkUWSjtdC%2BwU%2BCMJCPSbv3hD5mHZVADQm6gSYFf4b4TGqHnAvPaIxeQNrei3lQnR%2FS%2BTOVJB%2BmcssT92FqYR6hvBLCAyuQP9jADOLoUD%2BGRDvfnR81bszYEhBTKFQr6DlXNqukWz5l5tUH7vPKS8ek%2BikXsldxjiqkLBMS71iO2VTWy23HfLywnqynvmksSi6gCVsEtKLuQr3Uwvtqd7wU6zwKSOL8nuXDYSf63S%2BHLUmgL9p1hbOfItm%2F3TmxMONC2n7VY6JehDW5PUIT30kU71i9Op2PIXOK%2Btdy3LeD8Rir1QFluQat9GPwJrV2Ta5EUTk1ybPTze36AGXbylprRZz%2BKfBL58qK%2B2QbmOdeBRUlOf8j879NyJtvJMwqZORguT9%2F3qgXvuermyObv%2Fc%2FsF5PPachoZ11gYFVtmW%2F5625yf656V2Q15VR85R2ZfOiBuJ7mOZR8lykL2d7azUCyNv25Ay5vy%2BTRZobIUZurnSDQ7yYIT%2BGB2J4%2BNctBhpPwW%2FiqYVVNMhwYlFWKGORN1bfspIT12siZVeStQL6GBHGMU5r%2Bru%2FvFkWDN%2FD28rZuNGH321ltxoRjYjQ2k0V9aJC1bezN0YDPqw0hKGn6tKiqhhkVU6sEHTxIzOpyyPwZgqw8gcymUTb%2Bv1Dv5XVk9A%3D%3D&X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Date=20191204T095049Z&X-Amz-SignedHeaders=host&X-Amz-Expires=300&X-Amz-Credential=ASIAQ3PHCVTYTLYSX5WP%2F20191204%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Signature=a5dac52cd14f599711cba2ec98375da0b1ba080b6dddccc4dfabf1f861277270&hash=b19be3f7d8f6b29f2ec9f5b448d49d6be98df708f6be1da606ed8d2d9ff9c428&host=68042c943591013ac2b2430a89b270f6af2c76d8dfd086a07176afe7c76c2c61&pii=S2212017314001479&tid=spdf-ce59b765-4c8e-4e59-882f-0ffe01b7900a&sid=aac1a6434e44304ad229aa9612f35249cc20gxrqb&type=client"}],"volume":15,"citation":{"chicago-de":"Mönks, Uwe, Henning Trsek, Lars Dürkop, Volker Geneiß und Volker Lohweg. 2014. Assisting the Design of Sensor and Information Fusion Systems. In: 2nd International Conference on System-integrated Intelligence, 15:35–45. Procedia Technology. Bremen. doi:https://doi.org/10.1016/j.protcy.2014.09.032, .","din1505-2-1":"Mönks, Uwe ; Trsek, Henning ; Dürkop, Lars ; Geneiß, Volker ; Lohweg, Volker: Assisting the Design of Sensor and Information Fusion Systems. In: 2nd International Conference on System-integrated Intelligence, Procedia Technology. Bd. 15. Bremen, 2014, S. 35–45","short":"U. Mönks, H. Trsek, L. Dürkop, V. Geneiß, V. Lohweg, in: 2nd International Conference on System-Integrated Intelligence, Bremen, 2014, pp. 35–45.","mla":"Mönks, Uwe, et al. “Assisting the Design of Sensor and Information Fusion Systems.” 2nd International Conference on System-Integrated Intelligence, vol. 15, 2014, pp. 35–45, doi:https://doi.org/10.1016/j.protcy.2014.09.032.","bjps":"Mönks U et al. (2014) Assisting the Design of Sensor and Information Fusion Systems. 2nd International Conference on System-Integrated Intelligence, vol. 15. Bremen, pp. 35–45.","havard":"U. Mönks, H. Trsek, L. Dürkop, V. Geneiß, V. Lohweg, Assisting the Design of Sensor and Information Fusion Systems, in: 2nd International Conference on System-Integrated Intelligence, Bremen, 2014: pp. 35–45.","ufg":"Mönks, Uwe et. al. (2014): Assisting the Design of Sensor and Information Fusion Systems, in: 2nd International Conference on System-integrated Intelligence (=Procedia Technology 15), Bremen, S. 35–45.","ama":"Mönks U, Trsek H, Dürkop L, Geneiß V, Lohweg V. Assisting the Design of Sensor and Information Fusion Systems. In: 2nd International Conference on System-Integrated Intelligence. Vol 15. Procedia Technology. Bremen; 2014:35-45. doi:https://doi.org/10.1016/j.protcy.2014.09.032","van":"Mönks U, Trsek H, Dürkop L, Geneiß V, Lohweg V. Assisting the Design of Sensor and Information Fusion Systems. In: 2nd International Conference on System-integrated Intelligence. Bremen; 2014. p. 35–45. (Procedia Technology; vol. 15).","chicago":"Mönks, Uwe, Henning Trsek, Lars Dürkop, Volker Geneiß, and Volker Lohweg. “Assisting the Design of Sensor and Information Fusion Systems.” In 2nd International Conference on System-Integrated Intelligence, 15:35–45. Procedia Technology. Bremen, 2014. https://doi.org/10.1016/j.protcy.2014.09.032.","ieee":"U. Mönks, H. Trsek, L. Dürkop, V. Geneiß, and V. Lohweg, “Assisting the Design of Sensor and Information Fusion Systems,” in 2nd International Conference on System-integrated Intelligence, 2014, vol. 15, pp. 35–45.","apa":"Mönks, U., Trsek, H., Dürkop, L., Geneiß, V., & Lohweg, V. (2014). Assisting the Design of Sensor and Information Fusion Systems. In 2nd International Conference on System-integrated Intelligence (Vol. 15, pp. 35–45). Bremen. https://doi.org/10.1016/j.protcy.2014.09.032"},"title":"Assisting the Design of Sensor and Information Fusion Systems","language":[{"iso":"eng"}],"oa":"1","date_updated":"2023-03-15T13:49:39Z","publication_identifier":{"issn":["2212-0173"]},"publication":"2nd International Conference on System-integrated Intelligence","date_created":"2019-12-04T09:48:55Z","abstract":[{"lang":"eng","text":"The increased deployment of information technology for information processing, extensive networking, and system/environment monitoring using sensor and information fusion systems are essential characteristics of cyber-physical systems. They allow an autonomous recognition and evaluation of the system's status leading to autonomous reactions improving or maintaining the status to operate adaptively, robustly, anticipatory, and user-friendly. Assisting the operator in handling such complex systems is rather important and requires self-configuration, self-diagnosis, and self-optimization capabilities. In this paper, a new assisted design methodology for sensor and information fusion systems is proposed. It is based on an innovative system architecture consisting of the information fusion system itself, intelligent adaptable sensors, and the communication architecture of the \"Intelligent Technical Systems OstWestfalenLippe\" (it's OWL) Leading-Edge Cluster project \"Intelligent Networking\" providing an intelligent network for self-configuration and the required real-time data exchange."}],"department":[{"_id":"DEP5023"}],"publication_status":"published","series_title":"Procedia Technology","_id":"2146","doi":"https://doi.org/10.1016/j.protcy.2014.09.032","place":"Bremen","intvolume":" 15","user_id":"45673","type":"conference"},{"type":"conference","date_created":"2019-12-04T09:53:46Z","date_updated":"2023-03-15T13:49:39Z","user_id":"45673","_id":"2147","language":[{"iso":"eng"}],"title":"Generation of robust optical paths – Color Processing for Mobile Devices. ","citation":{"van":"Gillich E, Dörksen H, Lohweg V. Generation of robust optical paths – Color Processing for Mobile Devices. . In 2014.","ama":"Gillich E, Dörksen H, Lohweg V. Generation of robust optical paths – Color Processing for Mobile Devices. . In: ; 2014.","ufg":"Gillich, Eugen et. al. (2014): Generation of robust optical paths – Color Processing for Mobile Devices. , in: .","bjps":"Gillich E, Dörksen H and Lohweg V (2014) Generation of Robust Optical Paths – Color Processing for Mobile Devices. .","mla":"Gillich, Eugen, et al. Generation of Robust Optical Paths – Color Processing for Mobile Devices. . 2014.","havard":"E. Gillich, H. Dörksen, V. Lohweg, Generation of robust optical paths – Color Processing for Mobile Devices. , in: 2014.","apa":"Gillich, E., Dörksen, H., & Lohweg, V. (2014). Generation of robust optical paths – Color Processing for Mobile Devices. .","ieee":"E. Gillich, H. Dörksen, and V. Lohweg, “Generation of robust optical paths – Color Processing for Mobile Devices. ,” 2014.","chicago":"Gillich, Eugen, Helene Dörksen, and Volker Lohweg. “Generation of Robust Optical Paths – Color Processing for Mobile Devices. ,” 2014.","short":"E. Gillich, H. Dörksen, V. Lohweg, in: 2014.","din1505-2-1":"Gillich, Eugen ; Dörksen, Helene ; Lohweg, Volker: Generation of robust optical paths – Color Processing for Mobile Devices. . In: , 2014","chicago-de":"Gillich, Eugen, Helene Dörksen und Volker Lohweg. 2014. Generation of robust optical paths – Color Processing for Mobile Devices. . In: ."},"department":[{"_id":"DEP5023"}],"author":[{"first_name":"Eugen","full_name":"Gillich, Eugen","last_name":"Gillich","id":"1706"},{"first_name":"Helene","id":"46416","full_name":"Dörksen, Helene","last_name":"Dörksen"},{"orcid":"0000-0002-3325-7887","id":"1804","full_name":"Lohweg, Volker","last_name":"Lohweg","first_name":"Volker"}],"year":2014,"status":"public"},{"publication_status":"published","citation":{"chicago-de":"Hofmann, Jürg, Eugen Gillich, Helene Dörksen, Daniel Chassot, Johannes Schaede, Thomas Türke und Volker Lohweg. 2014. New Strategies in Image Processing for Standardized Intaglio Quality Analysis in the Printing Process. In: .","din1505-2-1":"Hofmann, Jürg ; Gillich, Eugen ; Dörksen, Helene ; Chassot, Daniel ; Schaede, Johannes ; Türke, Thomas ; Lohweg, Volker: New Strategies in Image Processing for Standardized Intaglio Quality Analysis in the Printing Process. In: , 2014","short":"J. Hofmann, E. Gillich, H. Dörksen, D. Chassot, J. Schaede, T. Türke, V. Lohweg, in: 2014.","ufg":"Hofmann, Jürg et. al. (2014): New Strategies in Image Processing for Standardized Intaglio Quality Analysis in the Printing Process., in: .","bjps":"Hofmann J et al. (2014) New Strategies in Image Processing for Standardized Intaglio Quality Analysis in the Printing Process.","mla":"Hofmann, Jürg, et al. New Strategies in Image Processing for Standardized Intaglio Quality Analysis in the Printing Process. 2014.","havard":"J. Hofmann, E. Gillich, H. Dörksen, D. Chassot, J. Schaede, T. Türke, V. Lohweg, New Strategies in Image Processing for Standardized Intaglio Quality Analysis in the Printing Process., in: 2014.","van":"Hofmann J, Gillich E, Dörksen H, Chassot D, Schaede J, Türke T, et al. New Strategies in Image Processing for Standardized Intaglio Quality Analysis in the Printing Process. In 2014.","chicago":"Hofmann, Jürg, Eugen Gillich, Helene Dörksen, Daniel Chassot, Johannes Schaede, Thomas Türke, and Volker Lohweg. “New Strategies in Image Processing for Standardized Intaglio Quality Analysis in the Printing Process.,” 2014.","apa":"Hofmann, J., Gillich, E., Dörksen, H., Chassot, D., Schaede, J., Türke, T., & Lohweg, V. (2014). New Strategies in Image Processing for Standardized Intaglio Quality Analysis in the Printing Process.","ama":"Hofmann J, Gillich E, Dörksen H, et al. New Strategies in Image Processing for Standardized Intaglio Quality Analysis in the Printing Process. In: ; 2014.","ieee":"J. Hofmann et al., “New Strategies in Image Processing for Standardized Intaglio Quality Analysis in the Printing Process.,” 2014."},"title":"New Strategies in Image Processing for Standardized Intaglio Quality Analysis in the Printing Process.","status":"public","department":[{"_id":"DEP5023"}],"author":[{"first_name":"Jürg","last_name":"Hofmann","full_name":"Hofmann, Jürg"},{"id":"1706","last_name":"Gillich","full_name":"Gillich, Eugen","first_name":"Eugen"},{"id":"46416","first_name":"Helene","full_name":"Dörksen, Helene","last_name":"Dörksen"},{"last_name":"Chassot","first_name":"Daniel","full_name":"Chassot, Daniel"},{"first_name":"Johannes","full_name":"Schaede, Johannes","last_name":"Schaede","id":"2128"},{"full_name":"Türke, Thomas","first_name":"Thomas","last_name":"Türke"},{"first_name":"Volker","id":"1804","full_name":"Lohweg, Volker","last_name":"Lohweg","orcid":"0000-0002-3325-7887"}],"year":2014,"date_updated":"2023-03-15T13:49:39Z","user_id":"45673","date_created":"2019-12-04T09:59:31Z","type":"conference","_id":"2148","language":[{"iso":"eng"}]},{"year":2014,"author":[{"id":"1804","first_name":"Volker","full_name":"Lohweg, Volker","last_name":"Lohweg","orcid":"0000-0002-3325-7887"},{"id":"1852","first_name":"Jan-Friedrich","full_name":"Ehlenbröker, Jan-Friedrich","last_name":"Ehlenbröker"}],"department":[{"_id":"DEP5023"}],"status":"public","title":"microIDENT – A System for Simple Coding and Authentication of documents. ","citation":{"din1505-2-1":"Lohweg, Volker ; Ehlenbröker, Jan-Friedrich: microIDENT – A System for Simple Coding and Authentication of documents. . In: , 2014","chicago-de":"Lohweg, Volker und Jan-Friedrich Ehlenbröker. 2014. microIDENT – A System for Simple Coding and Authentication of documents. . In: .","short":"V. Lohweg, J.-F. Ehlenbröker, in: 2014.","chicago":"Lohweg, Volker, and Jan-Friedrich Ehlenbröker. “MicroIDENT – A System for Simple Coding and Authentication of Documents. ,” 2014.","ieee":"V. Lohweg and J.-F. Ehlenbröker, “microIDENT – A System for Simple Coding and Authentication of documents. ,” 2014.","apa":"Lohweg, V., & Ehlenbröker, J.-F. (2014). microIDENT – A System for Simple Coding and Authentication of documents. .","mla":"Lohweg, Volker, and Jan-Friedrich Ehlenbröker. MicroIDENT – A System for Simple Coding and Authentication of Documents. . 2014.","bjps":"Lohweg V and Ehlenbröker J-F (2014) MicroIDENT – A System for Simple Coding and Authentication of Documents. .","havard":"V. Lohweg, J.-F. Ehlenbröker, microIDENT – A System for Simple Coding and Authentication of documents. , in: 2014.","ufg":"Lohweg, Volker/Ehlenbröker, Jan-Friedrich (2014): microIDENT – A System for Simple Coding and Authentication of documents. , in: .","ama":"Lohweg V, Ehlenbröker J-F. microIDENT – A System for Simple Coding and Authentication of documents. . In: ; 2014.","van":"Lohweg V, Ehlenbröker J-F. microIDENT – A System for Simple Coding and Authentication of documents. . In 2014."},"language":[{"iso":"eng"}],"_id":"2149","date_created":"2019-12-04T10:01:11Z","type":"conference","user_id":"45673","date_updated":"2023-03-15T13:49:39Z"},{"citation":{"havard":"V. Lohweg, Technical Constraints for Mobile Devices in Banknote Authentication, in: De Nederlandsche Bank (Eingeladener Vortrag), DNB CASH RESEARCH SEMINAR, Amsterdam, 2014.","bjps":"Lohweg V (2014) Technical Constraints for Mobile Devices in Banknote Authentication. De Nederlandsche Bank (Eingeladener Vortrag). Amsterdam: DNB CASH RESEARCH SEMINAR.","mla":"Lohweg, Volker. “Technical Constraints for Mobile Devices in Banknote Authentication.” De Nederlandsche Bank (Eingeladener Vortrag), DNB CASH RESEARCH SEMINAR, 2014.","ufg":"Lohweg, Volker (2014): Technical Constraints for Mobile Devices in Banknote Authentication, in: De Nederlandsche Bank (eingeladener Vortrag), Amsterdam.","ama":"Lohweg V. Technical Constraints for Mobile Devices in Banknote Authentication. In: De Nederlandsche Bank (Eingeladener Vortrag). Amsterdam: DNB CASH RESEARCH SEMINAR; 2014.","van":"Lohweg V. Technical Constraints for Mobile Devices in Banknote Authentication. In: De Nederlandsche Bank (eingeladener Vortrag). Amsterdam: DNB CASH RESEARCH SEMINAR; 2014.","chicago":"Lohweg, Volker. “Technical Constraints for Mobile Devices in Banknote Authentication.” In De Nederlandsche Bank (Eingeladener Vortrag). Amsterdam: DNB CASH RESEARCH SEMINAR, 2014.","ieee":"V. Lohweg, “Technical Constraints for Mobile Devices in Banknote Authentication,” in De Nederlandsche Bank (eingeladener Vortrag), 2014.","apa":"Lohweg, V. (2014). Technical Constraints for Mobile Devices in Banknote Authentication. In De Nederlandsche Bank (eingeladener Vortrag). Amsterdam: DNB CASH RESEARCH SEMINAR.","din1505-2-1":"Lohweg, Volker: Technical Constraints for Mobile Devices in Banknote Authentication. In: De Nederlandsche Bank (eingeladener Vortrag). Amsterdam : DNB CASH RESEARCH SEMINAR, 2014","chicago-de":"Lohweg, Volker. 2014. Technical Constraints for Mobile Devices in Banknote Authentication. In: De Nederlandsche Bank (eingeladener Vortrag). Amsterdam: DNB CASH RESEARCH SEMINAR.","short":"V. Lohweg, in: De Nederlandsche Bank (Eingeladener Vortrag), DNB CASH RESEARCH SEMINAR, Amsterdam, 2014."},"title":"Technical Constraints for Mobile Devices in Banknote Authentication","publisher":"DNB CASH RESEARCH SEMINAR","status":"public","year":2014,"author":[{"orcid":"0000-0002-3325-7887","id":"1804","first_name":"Volker","last_name":"Lohweg","full_name":"Lohweg, Volker"}],"department":[{"_id":"DEP5023"}],"user_id":"45673","date_updated":"2023-03-15T13:49:39Z","publication":"De Nederlandsche Bank (eingeladener Vortrag)","date_created":"2019-12-04T10:02:54Z","type":"conference","_id":"2150","place":"Amsterdam","language":[{"iso":"eng"}]},{"status":"public","author":[{"orcid":"0000-0002-3325-7887","first_name":"Volker","id":"1804","last_name":"Lohweg","full_name":"Lohweg, Volker"}],"year":2014,"department":[{"_id":"DEP5023"}],"citation":{"ieee":"V. Lohweg, “Informationsfusion in der Produktionstechnik,” in ProduktionNRW, HMI2014 (Vortrag), Hannover, 2014.","ama":"Lohweg V. Informationsfusion in der Produktionstechnik. In: ProduktionNRW, HMI2014 (Vortrag), Hannover,. ; 2014.","apa":"Lohweg, V. (2014). Informationsfusion in der Produktionstechnik. In ProduktionNRW, HMI2014 (Vortrag), Hannover,.","chicago":"Lohweg, Volker. “Informationsfusion in Der Produktionstechnik.” In ProduktionNRW, HMI2014 (Vortrag), Hannover, 2014.","van":"Lohweg V. Informationsfusion in der Produktionstechnik. In: ProduktionNRW, HMI2014 (Vortrag), Hannover,. 2014.","ufg":"Lohweg, Volker (2014): Informationsfusion in der Produktionstechnik, in: ProduktionNRW, HMI2014 (Vortrag), Hannover,.","havard":"V. Lohweg, Informationsfusion in der Produktionstechnik, in: ProduktionNRW, HMI2014 (Vortrag), Hannover, 2014.","mla":"Lohweg, Volker. “Informationsfusion in Der Produktionstechnik.” ProduktionNRW, HMI2014 (Vortrag), Hannover, 2014.","bjps":"Lohweg V (2014) Informationsfusion in Der Produktionstechnik. ProduktionNRW, HMI2014 (Vortrag), Hannover,.","short":"V. Lohweg, in: ProduktionNRW, HMI2014 (Vortrag), Hannover, 2014.","din1505-2-1":"Lohweg, Volker: Informationsfusion in der Produktionstechnik. In: ProduktionNRW, HMI2014 (Vortrag), Hannover,, 2014","chicago-de":"Lohweg, Volker. 2014. Informationsfusion in der Produktionstechnik. In: ProduktionNRW, HMI2014 (Vortrag), Hannover,."},"title":"Informationsfusion in der Produktionstechnik","language":[{"iso":"eng"}],"_id":"2152","user_id":"45673","date_updated":"2023-03-15T13:49:39Z","publication":"ProduktionNRW, HMI2014 (Vortrag), Hannover,","type":"conference","date_created":"2019-12-04T10:04:09Z"},{"user_id":"45673","date_updated":"2023-03-15T13:49:39Z","publication":"Forum Robotics, Automation Vision, HMI2014 (Vortrag), Hannover,","type":"conference","date_created":"2019-12-04T10:05:19Z","language":[{"iso":"eng"}],"_id":"2154","citation":{"ieee":"V. Lohweg, “Verteilte Bildverarbeitung mit eingebetteten Systemen - ein alternativer Weg für den Maschinen- und Anlagenbau?,” in Forum Robotics, Automation Vision, HMI2014 (Vortrag), Hannover, 2014.","ama":"Lohweg V. Verteilte Bildverarbeitung mit eingebetteten Systemen - ein alternativer Weg für den Maschinen- und Anlagenbau? In: Forum Robotics, Automation Vision, HMI2014 (Vortrag), Hannover,. ; 2014.","chicago-de":"Lohweg, Volker. 2014. Verteilte Bildverarbeitung mit eingebetteten Systemen - ein alternativer Weg für den Maschinen- und Anlagenbau? In: Forum Robotics, Automation Vision, HMI2014 (Vortrag), Hannover,.","din1505-2-1":"Lohweg, Volker: Verteilte Bildverarbeitung mit eingebetteten Systemen - ein alternativer Weg für den Maschinen- und Anlagenbau? In: Forum Robotics, Automation Vision, HMI2014 (Vortrag), Hannover,, 2014","short":"V. Lohweg, in: Forum Robotics, Automation Vision, HMI2014 (Vortrag), Hannover, 2014.","chicago":"Lohweg, Volker. “Verteilte Bildverarbeitung Mit Eingebetteten Systemen - Ein Alternativer Weg Für Den Maschinen- Und Anlagenbau?” In Forum Robotics, Automation Vision, HMI2014 (Vortrag), Hannover, 2014.","apa":"Lohweg, V. (2014). Verteilte Bildverarbeitung mit eingebetteten Systemen - ein alternativer Weg für den Maschinen- und Anlagenbau? In Forum Robotics, Automation Vision, HMI2014 (Vortrag), Hannover,.","ufg":"Lohweg, Volker (2014): Verteilte Bildverarbeitung mit eingebetteten Systemen - ein alternativer Weg für den Maschinen- und Anlagenbau?, in: Forum Robotics, Automation Vision, HMI2014 (Vortrag), Hannover,.","havard":"V. Lohweg, Verteilte Bildverarbeitung mit eingebetteten Systemen - ein alternativer Weg für den Maschinen- und Anlagenbau?, in: Forum Robotics, Automation Vision, HMI2014 (Vortrag), Hannover, 2014.","mla":"Lohweg, Volker. “Verteilte Bildverarbeitung Mit Eingebetteten Systemen - Ein Alternativer Weg Für Den Maschinen- Und Anlagenbau?” Forum Robotics, Automation Vision, HMI2014 (Vortrag), Hannover, 2014.","bjps":"Lohweg V (2014) Verteilte Bildverarbeitung Mit Eingebetteten Systemen - Ein Alternativer Weg Für Den Maschinen- Und Anlagenbau? Forum Robotics, Automation Vision, HMI2014 (Vortrag), Hannover,.","van":"Lohweg V. Verteilte Bildverarbeitung mit eingebetteten Systemen - ein alternativer Weg für den Maschinen- und Anlagenbau? In: Forum Robotics, Automation Vision, HMI2014 (Vortrag), Hannover,. 2014."},"title":"Verteilte Bildverarbeitung mit eingebetteten Systemen - ein alternativer Weg für den Maschinen- und Anlagenbau?","status":"public","year":2014,"author":[{"last_name":"Lohweg","full_name":"Lohweg, Volker","id":"1804","first_name":"Volker","orcid":"0000-0002-3325-7887"}],"department":[{"_id":"DEP5023"}]},{"language":[{"iso":"eng"}],"_id":"2156","publication":"IG Metall Workshop zu Industrie 4.0 (Vortrag), CIIT, Lemgo, ","date_created":"2019-12-04T10:07:10Z","type":"conference","user_id":"45673","date_updated":"2023-03-15T13:49:39Z","year":2014,"author":[{"first_name":"Volker","full_name":"Lohweg, Volker","last_name":"Lohweg","id":"1804","orcid":"0000-0002-3325-7887"}],"department":[{"_id":"DEP5023"}],"status":"public","title":"Industrie 4.0 - Was ist das?","citation":{"apa":"Lohweg, V. (2014). Industrie 4.0 - Was ist das? In IG Metall Workshop zu Industrie 4.0 (Vortrag), CIIT, Lemgo, .","chicago":"Lohweg, Volker. “Industrie 4.0 - Was Ist Das?” In IG Metall Workshop Zu Industrie 4.0 (Vortrag), CIIT, Lemgo, , 2014.","van":"Lohweg V. Industrie 4.0 - Was ist das? In: IG Metall Workshop zu Industrie 40 (Vortrag), CIIT, Lemgo, . 2014.","bjps":"Lohweg V (2014) Industrie 4.0 - Was Ist Das? IG Metall Workshop Zu Industrie 4.0 (Vortrag), CIIT, Lemgo, .","havard":"V. Lohweg, Industrie 4.0 - Was ist das?, in: IG Metall Workshop Zu Industrie 4.0 (Vortrag), CIIT, Lemgo, , 2014.","mla":"Lohweg, Volker. “Industrie 4.0 - Was Ist Das?” IG Metall Workshop Zu Industrie 4.0 (Vortrag), CIIT, Lemgo, , 2014.","ufg":"Lohweg, Volker (2014): Industrie 4.0 - Was ist das?, in: IG Metall Workshop zu Industrie 4.0 (Vortrag), CIIT, Lemgo, .","short":"V. Lohweg, in: IG Metall Workshop Zu Industrie 4.0 (Vortrag), CIIT, Lemgo, , 2014.","din1505-2-1":"Lohweg, Volker: Industrie 4.0 - Was ist das? In: IG Metall Workshop zu Industrie 4.0 (Vortrag), CIIT, Lemgo, , 2014","chicago-de":"Lohweg, Volker. 2014. Industrie 4.0 - Was ist das? In: IG Metall Workshop zu Industrie 4.0 (Vortrag), CIIT, Lemgo, .","ieee":"V. Lohweg, “Industrie 4.0 - Was ist das?,” in IG Metall Workshop zu Industrie 4.0 (Vortrag), CIIT, Lemgo, , 2014.","ama":"Lohweg V. Industrie 4.0 - Was ist das? In: IG Metall Workshop Zu Industrie 4.0 (Vortrag), CIIT, Lemgo, . ; 2014."}},{"department":[{"_id":"DEP5023"}],"author":[{"id":"1825","first_name":"Uwe","last_name":"Mönks","full_name":"Mönks, Uwe"},{"orcid":"0000-0002-3325-7887","id":"1804","last_name":"Lohweg","first_name":"Volker","full_name":"Lohweg, Volker"}],"year":2014,"abstract":[{"text":"Information fusion systems are crucial for the success of the upcoming fourth industrial revolution. In this emerging field, cyber-physicals systems play a major role. These are physical processing systems equipped with sensory devices which interconnect over communication networks for distributed cognitive information processing applications. Cyber-physical systems are generally limited in computational resources. Due to this fact, signal processing algorithms cannot be implemented one-to-one. Instead, efforts must be spent in algorithm optimisation towards resource efficiency and reduced computational complexity. In this contribution, we present our optimisation approach by matrix decomposition of an evidence-based conflict-reducing fusion approach which after optimisation is applicable in resource-limited devices for cognitive signal processing. We evaluate the results by comparison with the algorithm's original definition and show the improvements achieved. ","lang":"eng"}],"status":"public","title":"Fast Evidence-based Information Fusion","publication_status":"published","citation":{"short":"U. Mönks, V. Lohweg, in: 4th Internation Workshop on Cognitive Information, Copenhagen, Denmark, 2014.","din1505-2-1":"Mönks, Uwe ; Lohweg, Volker: Fast Evidence-based Information Fusion. In: 4th Internation Workshop on Cognitive Information. Copenhagen, Denmark, 2014","chicago-de":"Mönks, Uwe und Volker Lohweg. 2014. Fast Evidence-based Information Fusion. In: 4th Internation Workshop on Cognitive Information. Copenhagen, Denmark. doi: 10.1109/CIP.2014.6844508, .","apa":"Mönks, U., & Lohweg, V. (2014). Fast Evidence-based Information Fusion. In 4th Internation Workshop on Cognitive Information. Copenhagen, Denmark. https://doi.org/ 10.1109/CIP.2014.6844508","chicago":"Mönks, Uwe, and Volker Lohweg. “Fast Evidence-Based Information Fusion.” In 4th Internation Workshop on Cognitive Information. Copenhagen, Denmark, 2014. https://doi.org/ 10.1109/CIP.2014.6844508.","van":"Mönks U, Lohweg V. Fast Evidence-based Information Fusion. In: 4th Internation Workshop on Cognitive Information. Copenhagen, Denmark; 2014.","ufg":"Mönks, Uwe/Lohweg, Volker (2014): Fast Evidence-based Information Fusion, in: 4th Internation Workshop on Cognitive Information, Copenhagen, Denmark.","havard":"U. Mönks, V. Lohweg, Fast Evidence-based Information Fusion, in: 4th Internation Workshop on Cognitive Information, Copenhagen, Denmark, 2014.","mla":"Mönks, Uwe, and Volker Lohweg. “Fast Evidence-Based Information Fusion.” 4th Internation Workshop on Cognitive Information, 2014, doi: 10.1109/CIP.2014.6844508.","bjps":"Mönks U and Lohweg V (2014) Fast Evidence-Based Information Fusion. 4th Internation Workshop on Cognitive Information. Copenhagen, Denmark.","ieee":"U. Mönks and V. Lohweg, “Fast Evidence-based Information Fusion,” in 4th Internation Workshop on Cognitive Information, 2014.","ama":"Mönks U, Lohweg V. Fast Evidence-based Information Fusion. In: 4th Internation Workshop on Cognitive Information. Copenhagen, Denmark; 2014. doi: 10.1109/CIP.2014.6844508"},"language":[{"iso":"eng"}],"place":"Copenhagen, Denmark","doi":" 10.1109/CIP.2014.6844508","_id":"2157","type":"conference","date_created":"2019-12-04T10:09:57Z","publication_identifier":{"eissn":["2327-1698 "],"eisbn":["978-1-4799-3696-0 "]},"publication":"4th Internation Workshop on Cognitive Information","date_updated":"2023-03-15T13:49:39Z","user_id":"45673"},{"_id":"2158","language":[{"iso":"eng"}],"date_created":"2019-12-04T10:14:40Z","type":"conference","publication":"Norddeutsche Produktionstage 2014, Campus Universität Bremen (eingeladener Vortrag), Bremen,","date_updated":"2023-03-15T13:49:39Z","user_id":"45673","department":[{"_id":"DEP5023"}],"year":2014,"author":[{"first_name":"Volker","last_name":"Lohweg","id":"1804","full_name":"Lohweg, Volker","orcid":"0000-0002-3325-7887"}],"status":"public","title":"Intelligente Vernetzung für Industrie 4.0","citation":{"chicago-de":"Lohweg, Volker. 2014. Intelligente Vernetzung für Industrie 4.0. In: Norddeutsche Produktionstage 2014, Campus Universität Bremen (eingeladener Vortrag), Bremen,.","din1505-2-1":"Lohweg, Volker: Intelligente Vernetzung für Industrie 4.0. In: Norddeutsche Produktionstage 2014, Campus Universität Bremen (eingeladener Vortrag), Bremen,, 2014","short":"V. Lohweg, in: Norddeutsche Produktionstage 2014, Campus Universität Bremen (Eingeladener Vortrag), Bremen, 2014.","chicago":"Lohweg, Volker. “Intelligente Vernetzung Für Industrie 4.0.” In Norddeutsche Produktionstage 2014, Campus Universität Bremen (Eingeladener Vortrag), Bremen, 2014.","apa":"Lohweg, V. (2014). Intelligente Vernetzung für Industrie 4.0. In Norddeutsche Produktionstage 2014, Campus Universität Bremen (eingeladener Vortrag), Bremen,.","ufg":"Lohweg, Volker (2014): Intelligente Vernetzung für Industrie 4.0, in: Norddeutsche Produktionstage 2014, Campus Universität Bremen (eingeladener Vortrag), Bremen,.","bjps":"Lohweg V (2014) Intelligente Vernetzung Für Industrie 4.0. Norddeutsche Produktionstage 2014, Campus Universität Bremen (Eingeladener Vortrag), Bremen,.","mla":"Lohweg, Volker. “Intelligente Vernetzung Für Industrie 4.0.” Norddeutsche Produktionstage 2014, Campus Universität Bremen (Eingeladener Vortrag), Bremen, 2014.","havard":"V. Lohweg, Intelligente Vernetzung für Industrie 4.0, in: Norddeutsche Produktionstage 2014, Campus Universität Bremen (Eingeladener Vortrag), Bremen, 2014.","van":"Lohweg V. Intelligente Vernetzung für Industrie 4.0. In: Norddeutsche Produktionstage 2014, Campus Universität Bremen (eingeladener Vortrag), Bremen,. 2014.","ieee":"V. Lohweg, “Intelligente Vernetzung für Industrie 4.0,” in Norddeutsche Produktionstage 2014, Campus Universität Bremen (eingeladener Vortrag), Bremen, 2014.","ama":"Lohweg V. Intelligente Vernetzung für Industrie 4.0. In: Norddeutsche Produktionstage 2014, Campus Universität Bremen (Eingeladener Vortrag), Bremen,. ; 2014."}},{"abstract":[{"lang":"eng","text":"In this contribution we show enhancements of the safety of hazardous material stores by the usage of a condition monitoring system. Hazardous material stores function as a store for dangerous chemicals. We use fire simulations to simulate a fire and use the results of this simulation in our condition monitoring system in order to show the attainable gains. The used condition monitoring system utilises multiple sensors which are distributed inside and outside of the hazardous material store. The values of the sensors are combined over multiple levels into one state for the complete system. This allows us to significantly enhance the detection time of dangerous operating states, compared to the use of dedicated single sensors."}],"department":[{"_id":"DEP5023"}],"author":[{"full_name":"Ehlenbröker, Jan-Friedrich","id":"1852","last_name":"Ehlenbröker","first_name":"Jan-Friedrich"},{"first_name":"Uwe","full_name":"Mönks, Uwe","last_name":"Mönks","id":"1825"},{"last_name":"Wesemann","id":"1273","first_name":"Derk","full_name":"Wesemann, Derk"},{"orcid":"0000-0002-3325-7887","full_name":"Lohweg, Volker","first_name":"Volker","last_name":"Lohweg","id":"1804"}],"year":2014,"status":"public","title":"Condition monitoring for hazardous material storage","publication_status":"published","citation":{"short":"J.-F. Ehlenbröker, U. Mönks, D. Wesemann, V. Lohweg, in: Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA), 2014.","chicago-de":"Ehlenbröker, Jan-Friedrich, Uwe Mönks, Derk Wesemann und Volker Lohweg. 2014. Condition monitoring for hazardous material storage. In: Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA). doi:10.1109/etfa.2014.7005264, .","din1505-2-1":"Ehlenbröker, Jan-Friedrich ; Mönks, Uwe ; Wesemann, Derk ; Lohweg, Volker: Condition monitoring for hazardous material storage. In: Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA), 2014","apa":"Ehlenbröker, J.-F., Mönks, U., Wesemann, D., & Lohweg, V. (2014). Condition monitoring for hazardous material storage. In Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA). https://doi.org/10.1109/etfa.2014.7005264","ieee":"J.-F. Ehlenbröker, U. Mönks, D. Wesemann, and V. Lohweg, “Condition monitoring for hazardous material storage,” in Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA), 2014.","chicago":"Ehlenbröker, Jan-Friedrich, Uwe Mönks, Derk Wesemann, and Volker Lohweg. “Condition Monitoring for Hazardous Material Storage.” In Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA), 2014. https://doi.org/10.1109/etfa.2014.7005264.","van":"Ehlenbröker J-F, Mönks U, Wesemann D, Lohweg V. Condition monitoring for hazardous material storage. In: Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA). 2014.","ama":"Ehlenbröker J-F, Mönks U, Wesemann D, Lohweg V. Condition monitoring for hazardous material storage. In: Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA). ; 2014. doi:10.1109/etfa.2014.7005264","ufg":"Ehlenbröker, Jan-Friedrich et. al. (2014): Condition monitoring for hazardous material storage, in: Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA).","havard":"J.-F. Ehlenbröker, U. Mönks, D. Wesemann, V. Lohweg, Condition monitoring for hazardous material storage, in: Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA), 2014.","mla":"Ehlenbröker, Jan-Friedrich, et al. “Condition Monitoring for Hazardous Material Storage.” Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA), 2014, doi:10.1109/etfa.2014.7005264.","bjps":"Ehlenbröker J-F et al. (2014) Condition Monitoring for Hazardous Material Storage. Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA)."},"doi":"10.1109/etfa.2014.7005264","_id":"2159","language":[{"iso":"eng"}],"date_created":"2019-12-04T10:16:11Z","type":"conference","publication_identifier":{"isbn":[" 978-1-4799-4845-1"]},"publication":"Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA)","date_updated":"2023-03-15T13:49:39Z","user_id":"68554"},{"publication":"Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA)","publication_identifier":{"isbn":["978-1-4799-4845-1"]},"date_created":"2019-12-04T10:17:31Z","type":"conference","user_id":"68554","date_updated":"2023-03-15T13:49:39Z","_id":"2160","doi":"10.1109/ETFA.2014.7005106","language":[{"iso":"eng"}],"title":"Combinatorial refinement of feature weighting for linear classification","citation":{"short":"H. Dörksen, V. Lohweg, in: Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA), IEEE, 2014.","chicago-de":"Dörksen, Helene und Volker Lohweg. 2014. Combinatorial refinement of feature weighting for linear classification. In: Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA). IEEE. doi:10.1109/ETFA.2014.7005106, .","din1505-2-1":"Dörksen, Helene ; Lohweg, Volker: Combinatorial refinement of feature weighting for linear classification. In: Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA) : IEEE, 2014","van":"Dörksen H, Lohweg V. Combinatorial refinement of feature weighting for linear classification. In: Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA). IEEE; 2014.","ufg":"Dörksen, Helene/Lohweg, Volker (2014): Combinatorial refinement of feature weighting for linear classification, in: Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA).","mla":"Dörksen, Helene, and Volker Lohweg. “Combinatorial Refinement of Feature Weighting for Linear Classification.” Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA), IEEE, 2014, doi:10.1109/ETFA.2014.7005106.","bjps":"Dörksen H and Lohweg V (2014) Combinatorial Refinement of Feature Weighting for Linear Classification. Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA). IEEE.","havard":"H. Dörksen, V. Lohweg, Combinatorial refinement of feature weighting for linear classification, in: Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA), IEEE, 2014.","apa":"Dörksen, H., & Lohweg, V. (2014). Combinatorial refinement of feature weighting for linear classification. In Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA). IEEE. https://doi.org/10.1109/ETFA.2014.7005106","chicago":"Dörksen, Helene, and Volker Lohweg. “Combinatorial Refinement of Feature Weighting for Linear Classification.” In Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA). IEEE, 2014. https://doi.org/10.1109/ETFA.2014.7005106.","ama":"Dörksen H, Lohweg V. Combinatorial refinement of feature weighting for linear classification. In: Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA). IEEE; 2014. doi:10.1109/ETFA.2014.7005106","ieee":"H. Dörksen and V. Lohweg, “Combinatorial refinement of feature weighting for linear classification,” in Proceedings of the 2014 IEEE Emerging Technology and Factory Automation (ETFA), 2014."},"publication_status":"published","abstract":[{"text":"We present a new approach for linear classification optimisation based on Combinatorial Refinement (ComRef) of feature weighting for cognitive signal processing in resource-limited hardware and software like in Cyber-physical systems. Despite simple construction, the approach is able to connect advantages of dimensionality reduction methods and such like combining multiple classifiers resp. Bag-of-classifiers-approaches and leads to a good generalisation ability even by use of small feature sets. Regarding generalisation ability, we benchmark the performance of ComRef on several datasets from the UCI repository. Furthermore, for an industrial dataset Motor Drive Diagnosis we show the advantage of ComRef which uses Support-Vector-Machines (SVM). In this application scenario, a trustful classifier is essential, since a small number of mis-classifications could lead to motor damages.","lang":"eng"}],"year":2014,"main_file_link":[{"url":"https://ieeexplore.ieee.org/document/7005106"}],"author":[{"last_name":"Dörksen","first_name":"Helene","full_name":"Dörksen, Helene","id":"46416"},{"orcid":"0000-0002-3325-7887","last_name":"Lohweg","first_name":"Volker","full_name":"Lohweg, Volker","id":"1804"}],"department":[{"_id":"DEP5023"}],"publisher":"IEEE","status":"public"},{"status":"public","department":[{"_id":"DEP5023"}],"year":2014,"author":[{"full_name":"Dörksen, Helene","first_name":"Helene","id":"46416","last_name":"Dörksen"},{"full_name":"Mönks, Uwe","last_name":"Mönks","id":"1825","first_name":"Uwe"},{"orcid":"0000-0002-3325-7887","last_name":"Lohweg","first_name":"Volker","id":"1804","full_name":"Lohweg, Volker"}],"citation":{"apa":"Dörksen, H., Mönks, U., & Lohweg, V. (2014). Fast Classification in Industrial Big Data Environments. In 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) Barcelona. Spain.","ieee":"H. Dörksen, U. Mönks, and V. Lohweg, “Fast Classification in Industrial Big Data Environments,” in 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) Barcelona, 2014.","chicago":"Dörksen, Helene, Uwe Mönks, and Volker Lohweg. “Fast Classification in Industrial Big Data Environments.” In 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) Barcelona. Spain, 2014.","van":"Dörksen H, Mönks U, Lohweg V. Fast Classification in Industrial Big Data Environments. In: 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) Barcelona. Spain; 2014.","ama":"Dörksen H, Mönks U, Lohweg V. Fast Classification in Industrial Big Data Environments. In: 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) Barcelona. Spain; 2014.","ufg":"Dörksen, Helene et. al. (2014): Fast Classification in Industrial Big Data Environments, in: 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) Barcelona, Spain.","bjps":"Dörksen H, Mönks U and Lohweg V (2014) Fast Classification in Industrial Big Data Environments. 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) Barcelona. Spain.","havard":"H. Dörksen, U. Mönks, V. Lohweg, Fast Classification in Industrial Big Data Environments, in: 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) Barcelona, Spain, 2014.","mla":"Dörksen, Helene, et al. “Fast Classification in Industrial Big Data Environments.” 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) Barcelona, 2014.","short":"H. Dörksen, U. Mönks, V. Lohweg, in: 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) Barcelona, Spain, 2014.","din1505-2-1":"Dörksen, Helene ; Mönks, Uwe ; Lohweg, Volker: Fast Classification in Industrial Big Data Environments. In: 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) Barcelona. Spain, 2014","chicago-de":"Dörksen, Helene, Uwe Mönks und Volker Lohweg. 2014. Fast Classification in Industrial Big Data Environments. In: 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) Barcelona. Spain."},"title":"Fast Classification in Industrial Big Data Environments","language":[{"iso":"eng"}],"place":"Spain","_id":"2161","date_updated":"2023-03-15T13:49:39Z","user_id":"45673","date_created":"2019-12-04T10:18:42Z","type":"conference","publication":"19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) Barcelona"},{"title":"4. Jahreskolloquium Bildverarbeitung in der Automation 2014 (BVAu2014)","citation":{"ama":"Lohweg V, Mertsching B. 4. Jahreskolloquium Bildverarbeitung in der Automation 2014 (BVAu2014). In: Bildverarbeitung in Der Automation 2014. Lemgo: inIT-Schriftenreihe, ISBN 978-3-9814062-5-2; 2014.","ieee":"V. Lohweg and B. Mertsching, “4. Jahreskolloquium Bildverarbeitung in der Automation 2014 (BVAu2014),” in Bildverarbeitung in der Automation 2014, 2014.","ufg":"Lohweg, Volker/Mertsching, Bärbel (2014): 4. Jahreskolloquium Bildverarbeitung in der Automation 2014 (BVAu2014), in: Bildverarbeitung in der Automation 2014, Lemgo.","bjps":"Lohweg V and Mertsching B (2014) 4. Jahreskolloquium Bildverarbeitung in Der Automation 2014 (BVAu2014). Bildverarbeitung in Der Automation 2014. Lemgo: inIT-Schriftenreihe, ISBN 978-3-9814062-5-2.","havard":"V. Lohweg, B. Mertsching, 4. Jahreskolloquium Bildverarbeitung in der Automation 2014 (BVAu2014), in: Bildverarbeitung in Der Automation 2014, inIT-Schriftenreihe, ISBN 978-3-9814062-5-2, Lemgo, 2014.","mla":"Lohweg, Volker, and Bärbel Mertsching. “4. Jahreskolloquium Bildverarbeitung in Der Automation 2014 (BVAu2014).” Bildverarbeitung in Der Automation 2014, inIT-Schriftenreihe, ISBN 978-3-9814062-5-2, 2014.","van":"Lohweg V, Mertsching B. 4. Jahreskolloquium Bildverarbeitung in der Automation 2014 (BVAu2014). In: Bildverarbeitung in der Automation 2014. Lemgo: inIT-Schriftenreihe, ISBN 978-3-9814062-5-2; 2014.","chicago":"Lohweg, Volker, and Bärbel Mertsching. “4. Jahreskolloquium Bildverarbeitung in Der Automation 2014 (BVAu2014).” In Bildverarbeitung in Der Automation 2014. Lemgo: inIT-Schriftenreihe, ISBN 978-3-9814062-5-2, 2014.","apa":"Lohweg, V., & Mertsching, B. (2014). 4. Jahreskolloquium Bildverarbeitung in der Automation 2014 (BVAu2014). In Bildverarbeitung in der Automation 2014. Lemgo: inIT-Schriftenreihe, ISBN 978-3-9814062-5-2.","din1505-2-1":"Lohweg, Volker ; Mertsching, Bärbel: 4. Jahreskolloquium Bildverarbeitung in der Automation 2014 (BVAu2014). In: Bildverarbeitung in der Automation 2014. Lemgo : inIT-Schriftenreihe, ISBN 978-3-9814062-5-2, 2014","chicago-de":"Lohweg, Volker und Bärbel Mertsching. 2014. 4. Jahreskolloquium Bildverarbeitung in der Automation 2014 (BVAu2014). In: Bildverarbeitung in der Automation 2014. Lemgo: inIT-Schriftenreihe, ISBN 978-3-9814062-5-2.","short":"V. Lohweg, B. Mertsching, in: Bildverarbeitung in Der Automation 2014, inIT-Schriftenreihe, ISBN 978-3-9814062-5-2, Lemgo, 2014."},"year":2014,"author":[{"orcid":"0000-0002-3325-7887","last_name":"Lohweg","first_name":"Volker","full_name":"Lohweg, Volker","id":"1804"},{"first_name":"Bärbel","last_name":"Mertsching","full_name":"Mertsching, Bärbel"}],"department":[{"_id":"DEP5023"}],"abstract":[{"lang":"ger","text":"Das 4. Jahreskolloquium „Bildverarbeitung in der Automation (BVAu 2014)“ ist ein Forum für Wissenschaft und Industrie im deutschsprachigen Raum für alle technisch/wissenschaftlichen Fragestellungen rund um die industrielle Bildverarbeitung und Mustererkennung.Die industrielle Bildverarbeitung und Mustererkennung ist eine der Schlüsseltechnologien für die Produkte von morgen sowie die Basis „intelligenter“ Qualitätssicherungssysteme in produzierenden Unternehmen. Interdisziplinäre Ansätze aus Technik, Biologie und Psychologie ermöglichen neue zukunftsweisende Lösungen. Durch den vermehrten Einsatz von Bildverarbeitung ergeben sich neue Möglichkeiten in rasanter Geschwindigkeit, gleichzeitig aber auch neue zu lösende Herausforderungen. Insbesondere in Bezug auf Industrie-4.0-Aspekte steht die industrielle Bildverarbeitung als Schlüsseltechnologie vor neuen Herausforderungen, die in den nächsten Jahren zu bewältigen sind. Dazu gehören unter anderem: kostengünstige Systeme, die massentauglich sind; schnelle Adaptierbarbeit in beliebige Systeme; intelligente Kameras, die leistungsfähig sind, usw.Die beiden Forschungseinrichtungen GET Lab – Technische kognitive Systeme der Universität Paderborn und inIT – Institut für industrielle Informationstechnik der Hochschule OWL widmen diesem wichtigen Fachgebiet das seit 2010 stattfindende Jahreskolloquium „Bildverarbeitung in der Automation (BVAu)“ im Rahmen der Initiative Industrielle Bildverarbeitung OWL.Die Veranstaltungsreihe, die wechselnd in Lemgo und Paderborn stattfindet, weist einen klaren aktuellen fachlichen Fokus und eine entsprechende Detailtiefe auf. Hierzu vermitteln sieben Fachbeiträge und zwei Keynotes aus Industrie und Wissenschaft einen guten Überblick zum momentanen Stand der Technik und zu aktuellen Innovationen in den Bereichen Technical Aspects of Vision Systems, Practical Image Processing und Algorithmic Approaches to Image Processing.Wir möchten uns an dieser Stelle bei allen Autoren und Koautoren für ihre qualitativ hochwertigen Beiträge bedanken. Außerdem geht ein herzliches Dankeschön an die Mitglieder des Programm- und Organisationskomitees für ihr Engagement."}],"status":"public","publisher":"inIT-Schriftenreihe, ISBN 978-3-9814062-5-2","publication":"Bildverarbeitung in der Automation 2014","date_created":"2019-12-04T10:19:50Z","type":"conference","user_id":"45673","date_updated":"2023-03-15T13:49:39Z","place":"Lemgo","language":[{"iso":"eng"}],"_id":"2162"},{"date_updated":"2023-03-15T13:49:39Z","user_id":"45673","type":"conference","date_created":"2019-12-04T10:21:01Z","publication":"BVAu 2014 - Bildverarbeitung für die Automation","_id":"2163","language":[{"iso":"eng"}],"place":"Lemgo, Germany","citation":{"apa":"Henning, K.-F., & Lohweg, V. (2014). Occlusion Detection for Textured 2D-Objects on a Heap . In BVAu 2014 - Bildverarbeitung für die Automation (pp. 1–8). Lemgo, Germany: inIT - Lemgoer Schriftenreihe.","chicago":"Henning, Kai-Fabian, and Volker Lohweg. “Occlusion Detection for Textured 2D-Objects on a Heap .” In BVAu 2014 - Bildverarbeitung Für Die Automation, 1–8. Lemgo, Germany: inIT - Lemgoer Schriftenreihe, 2014.","van":"Henning K-F, Lohweg V. Occlusion Detection for Textured 2D-Objects on a Heap . In: BVAu 2014 - Bildverarbeitung für die Automation. Lemgo, Germany: inIT - Lemgoer Schriftenreihe; 2014. p. 1–8.","havard":"K.-F. Henning, V. Lohweg, Occlusion Detection for Textured 2D-Objects on a Heap , in: BVAu 2014 - Bildverarbeitung Für Die Automation, inIT - Lemgoer Schriftenreihe, Lemgo, Germany, 2014: pp. 1–8.","mla":"Henning, Kai-Fabian, and Volker Lohweg. “Occlusion Detection for Textured 2D-Objects on a Heap .” BVAu 2014 - Bildverarbeitung Für Die Automation, inIT - Lemgoer Schriftenreihe, 2014, pp. 1–8.","bjps":"Henning K-F and Lohweg V (2014) Occlusion Detection for Textured 2D-Objects on a Heap . BVAu 2014 - Bildverarbeitung Für Die Automation. Lemgo, Germany: inIT - Lemgoer Schriftenreihe, pp. 1–8.","ufg":"Henning, Kai-Fabian/Lohweg, Volker (2014): Occlusion Detection for Textured 2D-Objects on a Heap , in: BVAu 2014 - Bildverarbeitung für die Automation, Lemgo, Germany, S. 1–8.","short":"K.-F. Henning, V. Lohweg, in: BVAu 2014 - Bildverarbeitung Für Die Automation, inIT - Lemgoer Schriftenreihe, Lemgo, Germany, 2014, pp. 1–8.","chicago-de":"Henning, Kai-Fabian und Volker Lohweg. 2014. Occlusion Detection for Textured 2D-Objects on a Heap . In: BVAu 2014 - Bildverarbeitung für die Automation, 1–8. Lemgo, Germany: inIT - Lemgoer Schriftenreihe.","din1505-2-1":"Henning, Kai-Fabian ; Lohweg, Volker: Occlusion Detection for Textured 2D-Objects on a Heap . In: BVAu 2014 - Bildverarbeitung für die Automation. Lemgo, Germany : inIT - Lemgoer Schriftenreihe, 2014, S. 1–8","ieee":"K.-F. Henning and V. Lohweg, “Occlusion Detection for Textured 2D-Objects on a Heap ,” in BVAu 2014 - Bildverarbeitung für die Automation, 2014, pp. 1–8.","ama":"Henning K-F, Lohweg V. Occlusion Detection for Textured 2D-Objects on a Heap . In: BVAu 2014 - Bildverarbeitung Für Die Automation. Lemgo, Germany: inIT - Lemgoer Schriftenreihe; 2014:1-8."},"title":"Occlusion Detection for Textured 2D-Objects on a Heap ","publisher":"inIT - Lemgoer Schriftenreihe","page":"1-8","status":"public","department":[{"_id":"DEP5023"}],"author":[{"full_name":"Henning, Kai-Fabian","first_name":"Kai-Fabian","last_name":"Henning","id":"44017"},{"orcid":"0000-0002-3325-7887","first_name":"Volker","full_name":"Lohweg, Volker","id":"1804","last_name":"Lohweg"}],"year":2014},{"date_updated":"2023-03-15T13:49:39Z","user_id":"45673","date_created":"2019-12-04T10:23:15Z","type":"conference","publication_identifier":{"isbn":["978-3-7315-0275-3"]},"publication":"24. Workshop Computational Intelligence","_id":"2164","language":[{"iso":"ger"}],"place":"Dortmund","oa":"1","publication_status":"published","citation":{"ieee":"R. Neumann, A. Dicks, U. Mönks, and V. Lohweg, “Fuzzy Pattern Klassifikation von Datensätzen mit nichtkonvexen Objektmorphologien,” in 24. Workshop Computational Intelligence, 2014, pp. 315–332.","ama":"Neumann R, Dicks A, Mönks U, Lohweg V. Fuzzy Pattern Klassifikation von Datensätzen mit nichtkonvexen Objektmorphologien. In: 24. Workshop Computational Intelligence. Dortmund: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA); 2014:315-332.","apa":"Neumann, R., Dicks, A., Mönks, U., & Lohweg, V. (2014). Fuzzy Pattern Klassifikation von Datensätzen mit nichtkonvexen Objektmorphologien. In 24. Workshop Computational Intelligence (pp. 315–332). Dortmund: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA).","chicago":"Neumann, Richard, Alexander Dicks, Uwe Mönks, and Volker Lohweg. “Fuzzy Pattern Klassifikation von Datensätzen mit nichtkonvexen Objektmorphologien.” In 24. Workshop Computational Intelligence, 315–32. Dortmund: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 2014.","van":"Neumann R, Dicks A, Mönks U, Lohweg V. Fuzzy Pattern Klassifikation von Datensätzen mit nichtkonvexen Objektmorphologien. In: 24 Workshop Computational Intelligence. Dortmund: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA); 2014. p. 315–32.","havard":"R. Neumann, A. Dicks, U. Mönks, V. Lohweg, Fuzzy Pattern Klassifikation von Datensätzen mit nichtkonvexen Objektmorphologien, in: 24. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), Dortmund, 2014: pp. 315–332.","bjps":"Neumann R et al. (2014) Fuzzy Pattern Klassifikation von Datensätzen mit nichtkonvexen Objektmorphologien. 24. Workshop Computational Intelligence. Dortmund: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), pp. 315–332.","mla":"Neumann, Richard, et al. “Fuzzy Pattern Klassifikation von Datensätzen mit nichtkonvexen Objektmorphologien.” 24. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 2014, pp. 315–32.","ufg":"Neumann, Richard et. al. (2014): Fuzzy Pattern Klassifikation von Datensätzen mit nichtkonvexen Objektmorphologien, in: 24. Workshop Computational Intelligence, Dortmund, S. 315–332.","short":"R. Neumann, A. Dicks, U. Mönks, V. Lohweg, in: 24. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), Dortmund, 2014, pp. 315–332.","din1505-2-1":"Neumann, Richard ; Dicks, Alexander ; Mönks, Uwe ; Lohweg, Volker: Fuzzy Pattern Klassifikation von Datensätzen mit nichtkonvexen Objektmorphologien. In: 24. Workshop Computational Intelligence. Dortmund : VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 2014, S. 315–332","chicago-de":"Neumann, Richard, Alexander Dicks, Uwe Mönks und Volker Lohweg. 2014. Fuzzy Pattern Klassifikation von Datensätzen mit nichtkonvexen Objektmorphologien. In: 24. Workshop Computational Intelligence, 315–332. Dortmund: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA)."},"title":"Fuzzy Pattern Klassifikation von Datensätzen mit nichtkonvexen Objektmorphologien","publisher":"VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA)","page":"315-332","status":"public","department":[{"_id":"DEP5023"}],"author":[{"full_name":"Neumann, Richard","last_name":"Neumann","first_name":"Richard"},{"first_name":"Alexander","full_name":"Dicks, Alexander","id":"1853","last_name":"Dicks"},{"full_name":"Mönks, Uwe","first_name":"Uwe","id":"1825","last_name":"Mönks"},{"id":"1804","first_name":"Volker","full_name":"Lohweg, Volker","last_name":"Lohweg","orcid":"0000-0002-3325-7887"}],"year":2014,"main_file_link":[{"url":"https://publikationen.bibliothek.kit.edu/1000043427/3301103","open_access":"1"}]},{"department":[{"_id":"DEP5023"}],"author":[{"first_name":"Sahar","full_name":"Deppe, Sahar","id":"52121","last_name":"Deppe"},{"first_name":"Volker","last_name":"Lohweg","full_name":"Lohweg, Volker","id":"1804","orcid":"0000-0002-3325-7887"}],"main_file_link":[{"open_access":"1","url":"https://publikationen.bibliothek.kit.edu/1000043427/3301103"}],"year":2014,"page":"277-298","status":"public","publisher":"VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA)","title":"Identification of Multi-Scale Motifs","publication_status":"published","citation":{"bjps":"Deppe S and Lohweg V (2014) Identification of Multi-Scale Motifs. 24. Workshop Computational Intelligence. Dortmund: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), pp. 277–298.","mla":"Deppe, Sahar, and Volker Lohweg. “Identification of Multi-Scale Motifs.” 24. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 2014, pp. 277–98.","havard":"S. Deppe, V. Lohweg, Identification of Multi-Scale Motifs, in: 24. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), Dortmund, 2014: pp. 277–298.","ufg":"Deppe, Sahar/Lohweg, Volker (2014): Identification of Multi-Scale Motifs, in: 24. Workshop Computational Intelligence, Dortmund, S. 277–298.","van":"Deppe S, Lohweg V. Identification of Multi-Scale Motifs. In: 24 Workshop Computational Intelligence. Dortmund: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA); 2014. p. 277–98.","chicago":"Deppe, Sahar, and Volker Lohweg. “Identification of Multi-Scale Motifs.” In 24. Workshop Computational Intelligence, 277–98. Dortmund: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 2014.","apa":"Deppe, S., & Lohweg, V. (2014). Identification of Multi-Scale Motifs. In 24. Workshop Computational Intelligence (pp. 277–298). Dortmund: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA).","chicago-de":"Deppe, Sahar und Volker Lohweg. 2014. Identification of Multi-Scale Motifs. In: 24. Workshop Computational Intelligence, 277–298. Dortmund: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA).","din1505-2-1":"Deppe, Sahar ; Lohweg, Volker: Identification of Multi-Scale Motifs. In: 24. Workshop Computational Intelligence. Dortmund : VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 2014, S. 277–298","short":"S. Deppe, V. Lohweg, in: 24. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), Dortmund, 2014, pp. 277–298.","ama":"Deppe S, Lohweg V. Identification of Multi-Scale Motifs. In: 24. Workshop Computational Intelligence. Dortmund: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA); 2014:277-298.","ieee":"S. Deppe and V. Lohweg, “Identification of Multi-Scale Motifs,” in 24. Workshop Computational Intelligence, 2014, pp. 277–298."},"oa":"1","language":[{"iso":"eng"}],"place":"Dortmund","_id":"2165","date_created":"2019-12-04T10:25:35Z","type":"conference","publication":"24. Workshop Computational Intelligence","publication_identifier":{"isbn":["978-3-7315-0275-3"]},"date_updated":"2023-03-15T13:49:39Z","user_id":"45673"},{"date_updated":"2024-05-17T12:33:37Z","user_id":"83778","intvolume":" 3","type":"book_chapter","date_created":"2020-05-25T13:30:23Z","publication":"Encyclopedia of meat sciences","edition":"2.","language":[{"iso":"eng"}],"place":"Oxford","_id":"2589","publication_status":"published","volume":3,"citation":{"apa":"Upmann, M., Stender, J., & Trilling, J. (2014). Quality management: Abattoirs and processing plants. In Encyclopedia of meat sciences (2., Vol. 3, pp. 159–167). Elsevier.","ieee":"M. Upmann, J. Stender, and J. Trilling, “Quality management: Abattoirs and processing plants,” in Encyclopedia of meat sciences, 2., vol. 3, Oxford: Elsevier, 2014, pp. 159–167.","chicago":"Upmann, Matthias, Jörg Stender, and J. Trilling. “Quality Management: Abattoirs and Processing Plants.” In Encyclopedia of Meat Sciences, 2., 3:159–67. Oxford: Elsevier, 2014.","van":"Upmann M, Stender J, Trilling J. Quality management: Abattoirs and processing plants. In: Encyclopedia of meat sciences. 2. Oxford: Elsevier; 2014. p. 159–67.","ama":"Upmann M, Stender J, Trilling J. Quality management: Abattoirs and processing plants. In: Encyclopedia of Meat Sciences. Vol 3. 2. Elsevier; 2014:159-167.","ufg":"Upmann, Matthias/Stender, Jörg/Trilling, J.: Quality management: Abattoirs and processing plants, in: o. Hg.: Encyclopedia of meat sciences, Bd. 3, 2., Oxford 2014, S. 159–167.","bjps":"Upmann M, Stender J and Trilling J (2014) Quality Management: Abattoirs and Processing Plants. Encyclopedia of Meat Sciences, 2., vol. 3. Oxford: Elsevier, pp. 159–167.","mla":"Upmann, Matthias, et al. “Quality Management: Abattoirs and Processing Plants.” Encyclopedia of Meat Sciences, 2., vol. 3, Elsevier, 2014, pp. 159–67.","havard":"M. Upmann, J. Stender, J. Trilling, Quality management: Abattoirs and processing plants, in: Encyclopedia of Meat Sciences, 2., Elsevier, Oxford, 2014: pp. 159–167.","short":"M. Upmann, J. Stender, J. Trilling, in: Encyclopedia of Meat Sciences, 2., Elsevier, Oxford, 2014, pp. 159–167.","din1505-2-1":"Upmann, Matthias ; Stender, Jörg ; Trilling, J.: Quality management: Abattoirs and processing plants. In: Encyclopedia of meat sciences. Bd. 3. 2. Oxford : Elsevier, 2014, S. 159–167","chicago-de":"Upmann, Matthias, Jörg Stender und J. Trilling. 2014. Quality management: Abattoirs and processing plants. In: Encyclopedia of meat sciences, 3:159–167. 2. Oxford: Elsevier."},"title":"Quality management: Abattoirs and processing plants","page":"159-167","status":"public","publisher":"Elsevier","department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"author":[{"last_name":"Upmann","id":"12666","first_name":"Matthias","full_name":"Upmann, Matthias"},{"id":"12346","full_name":"Stender, Jörg","last_name":"Stender","first_name":"Jörg"},{"full_name":"Trilling, J.","last_name":"Trilling","first_name":"J."}],"year":"2014"},{"_id":"2590","language":[{"iso":"eng"}],"place":"Oxford","date_updated":"2024-05-17T12:34:00Z","user_id":"83778","edition":"2.","type":"encyclopedia_article","date_created":"2020-05-25T13:32:19Z","publication":"Encyclopedia of meat sciences","publisher":"Elsevier","page":"145-151","status":"public","department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"author":[{"full_name":"Upmann, Matthias","id":"12666","last_name":"Upmann","first_name":"Matthias"},{"full_name":"Stephan, Rainer","id":"23567","first_name":"Rainer","last_name":"Stephan"}],"year":"2014","publication_status":"published","citation":{"chicago":"Upmann, Matthias, and Rainer Stephan. “Laboratory Accreditation.” In Encyclopedia of Meat Sciences, 2., 145–51. Oxford: Elsevier, 2014.","ieee":"M. Upmann and R. Stephan, “Laboratory accreditation,” in Encyclopedia of meat sciences, 2., Oxford: Elsevier, 2014, pp. 145–151.","apa":"Upmann, M., & Stephan, R. (2014). Laboratory accreditation. In Encyclopedia of meat sciences (2., pp. 145–151). Elsevier.","havard":"M. Upmann, R. Stephan, Laboratory accreditation, in: Encyclopedia of Meat Sciences, 2., Elsevier, Oxford, 2014: pp. 145–151.","mla":"Upmann, Matthias, and Rainer Stephan. “Laboratory Accreditation.” Encyclopedia of Meat Sciences, 2., Elsevier, 2014, pp. 145–51.","bjps":"Upmann M and Stephan R (2014) Laboratory Accreditation. Encyclopedia of Meat Sciences, 2. Oxford: Elsevier, pp. 145–151.","ufg":"Upmann, Matthias/Stephan, Rainer: Laboratory accreditation, in: o. Hg.: Encyclopedia of meat sciences, 2., Oxford 2014, S. 145–151.","ama":"Upmann M, Stephan R. Laboratory accreditation. In: Encyclopedia of Meat Sciences. 2. Elsevier; 2014:145-151.","van":"Upmann M, Stephan R. Laboratory accreditation. In: Encyclopedia of meat sciences. 2. Oxford: Elsevier; 2014. p. 145–51.","din1505-2-1":"Upmann, Matthias ; Stephan, Rainer: Laboratory accreditation. In: Encyclopedia of meat sciences. 2. Oxford : Elsevier, 2014, S. 145–151","chicago-de":"Upmann, Matthias und Rainer Stephan. 2014. Laboratory accreditation. In: Encyclopedia of meat sciences, 145–151. 2. Oxford: Elsevier.","short":"M. Upmann, R. Stephan, in: Encyclopedia of Meat Sciences, 2., Elsevier, Oxford, 2014, pp. 145–151."},"title":"Laboratory accreditation"},{"user_id":"83778","date_updated":"2024-05-17T12:35:20Z","date_created":"2020-05-25T13:34:11Z","type":"conference","_id":"2591","language":[{"iso":"ger"}],"citation":{"ama":"Upmann M. Dekontamination von Schlachttierkörpern durch Milchsäure - eine Übersicht. In: ; 2014.","ieee":"M. Upmann, “Dekontamination von Schlachttierkörpern durch Milchsäure - eine Übersicht,” presented at the DLG-Symposium “Fleischqualität der Zukunft,” Erfurt, 2014.","chicago-de":"Upmann, Matthias. 2014. Dekontamination von Schlachttierkörpern durch Milchsäure - eine Übersicht. In: .","din1505-2-1":"Upmann, Matthias: Dekontamination von Schlachttierkörpern durch Milchsäure - eine Übersicht. In: , 2014","short":"M. Upmann, in: 2014.","havard":"M. Upmann, Dekontamination von Schlachttierkörpern durch Milchsäure - eine Übersicht, in: 2014.","mla":"Upmann, Matthias. Dekontamination von Schlachttierkörpern durch Milchsäure - eine Übersicht. 2014.","bjps":"Upmann M (2014) Dekontamination von Schlachttierkörpern durch Milchsäure - eine Übersicht.","ufg":"Upmann, Matthias: Dekontamination von Schlachttierkörpern durch Milchsäure - eine Übersicht, in: o. Hg.: o. O. 2014.","van":"Upmann M. Dekontamination von Schlachttierkörpern durch Milchsäure - eine Übersicht. In 2014.","chicago":"Upmann, Matthias. “Dekontamination von Schlachttierkörpern durch Milchsäure - eine Übersicht,” 2014.","apa":"Upmann, M. (2014). Dekontamination von Schlachttierkörpern durch Milchsäure - eine Übersicht. DLG-Symposium “Fleischqualität der Zukunft,” Erfurt."},"publication_status":"published","title":"Dekontamination von Schlachttierkörpern durch Milchsäure - eine Übersicht","status":"public","author":[{"first_name":"Matthias","last_name":"Upmann","id":"12666","full_name":"Upmann, Matthias"}],"year":"2014","conference":{"location":"Erfurt","name":"DLG-Symposium \"Fleischqualität der Zukunft\"","end_date":"2014-02-18","start_date":"2014-02-18"},"department":[{"_id":"DEP4023"},{"_id":"DEP4019"}]},{"citation":{"ama":"Upmann M, Köhne T, Langen M. Aspikerzeugnisse: Gewichtsverlust der Einlagen bei der Herstellung und Lagerung. In: ; 2014.","ieee":"M. Upmann, T. Köhne, and M. Langen, “Aspikerzeugnisse: Gewichtsverlust der Einlagen bei der Herstellung und Lagerung,” presented at the 73. ALTS-Arbeitstagung, Berlin, 2014.","van":"Upmann M, Köhne T, Langen M. Aspikerzeugnisse: Gewichtsverlust der Einlagen bei der Herstellung und Lagerung. In 2014.","ufg":"Upmann, Matthias/Köhne, T./Langen, M.: Aspikerzeugnisse: Gewichtsverlust der Einlagen bei der Herstellung und Lagerung, in: o. Hg.: o. O. 2014.","bjps":"Upmann M, Köhne T and Langen M (2014) Aspikerzeugnisse: Gewichtsverlust der Einlagen bei der Herstellung und Lagerung.","havard":"M. Upmann, T. Köhne, M. Langen, Aspikerzeugnisse: Gewichtsverlust der Einlagen bei der Herstellung und Lagerung, in: 2014.","mla":"Upmann, Matthias, et al. Aspikerzeugnisse: Gewichtsverlust der Einlagen bei der Herstellung und Lagerung. 2014.","apa":"Upmann, M., Köhne, T., & Langen, M. (2014). Aspikerzeugnisse: Gewichtsverlust der Einlagen bei der Herstellung und Lagerung. 73. ALTS-Arbeitstagung, Berlin.","chicago":"Upmann, Matthias, T. Köhne, and M. Langen. “Aspikerzeugnisse: Gewichtsverlust der Einlagen bei der Herstellung und Lagerung,” 2014.","short":"M. Upmann, T. Köhne, M. Langen, in: 2014.","chicago-de":"Upmann, Matthias, T. Köhne und M. Langen. 2014. Aspikerzeugnisse: Gewichtsverlust der Einlagen bei der Herstellung und Lagerung. In: .","din1505-2-1":"Upmann, Matthias ; Köhne, T. ; Langen, M.: Aspikerzeugnisse: Gewichtsverlust der Einlagen bei der Herstellung und Lagerung. In: , 2014"},"publication_status":"published","title":"Aspikerzeugnisse: Gewichtsverlust der Einlagen bei der Herstellung und Lagerung","status":"public","year":"2014","author":[{"full_name":"Upmann, Matthias","last_name":"Upmann","id":"12666","first_name":"Matthias"},{"full_name":"Köhne, T.","first_name":"T.","last_name":"Köhne"},{"first_name":"M.","last_name":"Langen","full_name":"Langen, M."}],"conference":{"end_date":"2014-06-25","start_date":"2014-06-23","name":"73. ALTS-Arbeitstagung","location":"Berlin"},"department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"user_id":"83778","date_updated":"2024-05-17T12:35:43Z","date_created":"2020-05-25T13:36:08Z","type":"conference","_id":"2592","language":[{"iso":"ger"}]},{"status":"public","author":[{"last_name":"Upmann","first_name":"Matthias","full_name":"Upmann, Matthias","id":"12666"},{"first_name":"L.","last_name":"Bleischwitz","full_name":"Bleischwitz, L."},{"last_name":"Fritzsche","first_name":"Lutz","id":"48023","full_name":"Fritzsche, Lutz"},{"full_name":"Hartmann, V.","first_name":"V.","last_name":"Hartmann"},{"last_name":"Knedlik","first_name":"R.","full_name":"Knedlik, R."},{"last_name":"Peter","first_name":"M.","full_name":"Peter, M."},{"last_name":"Schneiders","full_name":"Schneiders, S.","first_name":"S."},{"last_name":"Schöneis","first_name":"R.","full_name":"Schöneis, R."},{"id":"12158","full_name":"Röser, Anja","first_name":"Anja","last_name":"Röser"}],"year":"2014","department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"conference":{"location":"Garmisch-Partenkirchen","name":"55. Arbeitstagung des Arbeitsgebietes \"Lebensmittelhygiene\"","end_date":"2014-09-26","start_date":"2014-09-23"},"citation":{"ieee":"M. Upmann et al., “Welchen Schneidsatz braucht der Wolf? Muskelfaserzerstörung in Hackfleischpatties,” presented at the 55. Arbeitstagung des Arbeitsgebietes “Lebensmittelhygiene,” Garmisch-Partenkirchen, 2014.","ama":"Upmann M, Bleischwitz L, Fritzsche L, et al. Welchen Schneidsatz braucht der Wolf? Muskelfaserzerstörung in Hackfleischpatties. In: ; 2014.","din1505-2-1":"Upmann, Matthias ; Bleischwitz, L. ; Fritzsche, Lutz ; Hartmann, V. ; Knedlik, R. ; Peter, M. ; Schneiders, S. ; Schöneis, R. ; u. a.: Welchen Schneidsatz braucht der Wolf? Muskelfaserzerstörung in Hackfleischpatties. In: , 2014","chicago-de":"Upmann, Matthias, L. Bleischwitz, Lutz Fritzsche, V. Hartmann, R. Knedlik, M. Peter, S. Schneiders, R. Schöneis und Anja Röser. 2014. Welchen Schneidsatz braucht der Wolf? Muskelfaserzerstörung in Hackfleischpatties. In: .","short":"M. Upmann, L. Bleischwitz, L. Fritzsche, V. Hartmann, R. Knedlik, M. Peter, S. Schneiders, R. Schöneis, A. Röser, in: 2014.","chicago":"Upmann, Matthias, L. Bleischwitz, Lutz Fritzsche, V. Hartmann, R. Knedlik, M. Peter, S. Schneiders, R. Schöneis, and Anja Röser. “Welchen Schneidsatz braucht der Wolf? Muskelfaserzerstörung in Hackfleischpatties,” 2014.","apa":"Upmann, M., Bleischwitz, L., Fritzsche, L., Hartmann, V., Knedlik, R., Peter, M., Schneiders, S., Schöneis, R., & Röser, A. (2014). Welchen Schneidsatz braucht der Wolf? Muskelfaserzerstörung in Hackfleischpatties. 55. Arbeitstagung des Arbeitsgebietes “Lebensmittelhygiene,” Garmisch-Partenkirchen.","ufg":"Upmann, Matthias u. a.: Welchen Schneidsatz braucht der Wolf? Muskelfaserzerstörung in Hackfleischpatties, in: o. Hg.: o. O. 2014.","bjps":"Upmann M et al. (2014) Welchen Schneidsatz braucht der Wolf? Muskelfaserzerstörung in Hackfleischpatties.","mla":"Upmann, Matthias, et al. Welchen Schneidsatz braucht der Wolf? Muskelfaserzerstörung in Hackfleischpatties. 2014.","havard":"M. Upmann, L. Bleischwitz, L. Fritzsche, V. Hartmann, R. Knedlik, M. Peter, S. Schneiders, R. Schöneis, A. Röser, Welchen Schneidsatz braucht der Wolf? Muskelfaserzerstörung in Hackfleischpatties, in: 2014.","van":"Upmann M, Bleischwitz L, Fritzsche L, Hartmann V, Knedlik R, Peter M, et al. Welchen Schneidsatz braucht der Wolf? Muskelfaserzerstörung in Hackfleischpatties. In 2014."},"publication_status":"published","title":"Welchen Schneidsatz braucht der Wolf? Muskelfaserzerstörung in Hackfleischpatties","_id":"2593","language":[{"iso":"ger"}],"user_id":"83778","date_updated":"2024-05-17T12:36:11Z","type":"conference","date_created":"2020-05-25T13:40:25Z"},{"citation":{"short":"M. Upmann, in: 2014.","chicago-de":"Upmann, Matthias. 2014. Kriterienkatalog zur mikroskopischen Bewertung von Muskelfaserstruktur-Veränderungen. Workshop „Lebensmittelhistologie“. In: .","din1505-2-1":"Upmann, Matthias: Kriterienkatalog zur mikroskopischen Bewertung von Muskelfaserstruktur-Veränderungen. Workshop „Lebensmittelhistologie“. In: , 2014","van":"Upmann M. Kriterienkatalog zur mikroskopischen Bewertung von Muskelfaserstruktur-Veränderungen. Workshop “Lebensmittelhistologie.” In 2014.","ama":"Upmann M. Kriterienkatalog zur mikroskopischen Bewertung von Muskelfaserstruktur-Veränderungen. Workshop “Lebensmittelhistologie.” In: ; 2014.","ufg":"Upmann, Matthias: Kriterienkatalog zur mikroskopischen Bewertung von Muskelfaserstruktur-Veränderungen. Workshop „Lebensmittelhistologie“, in: o. Hg.: o. O. 2014.","mla":"Upmann, Matthias. Kriterienkatalog zur mikroskopischen Bewertung von Muskelfaserstruktur-Veränderungen. Workshop “Lebensmittelhistologie.” 2014.","havard":"M. Upmann, Kriterienkatalog zur mikroskopischen Bewertung von Muskelfaserstruktur-Veränderungen. Workshop “Lebensmittelhistologie,” in: 2014.","bjps":"Upmann M (2014) Kriterienkatalog zur mikroskopischen Bewertung von Muskelfaserstruktur-Veränderungen. Workshop ‘Lebensmittelhistologie’.","apa":"Upmann, M. (2014). Kriterienkatalog zur mikroskopischen Bewertung von Muskelfaserstruktur-Veränderungen. Workshop “Lebensmittelhistologie.” 55. Arbeitstagung des Arbeitsgebietes “Lebensmittelhygiene,” Garmisch-Partenkirchen.","ieee":"M. Upmann, “Kriterienkatalog zur mikroskopischen Bewertung von Muskelfaserstruktur-Veränderungen. Workshop ‘Lebensmittelhistologie,’” presented at the 55. Arbeitstagung des Arbeitsgebietes “Lebensmittelhygiene,” Garmisch-Partenkirchen, 2014.","chicago":"Upmann, Matthias. “Kriterienkatalog zur mikroskopischen Bewertung von Muskelfaserstruktur-Veränderungen. Workshop ‘Lebensmittelhistologie,’” 2014."},"publication_status":"published","title":"Kriterienkatalog zur mikroskopischen Bewertung von Muskelfaserstruktur-Veränderungen. Workshop \"Lebensmittelhistologie\"","status":"public","year":"2014","author":[{"first_name":"Matthias","last_name":"Upmann","id":"12666","full_name":"Upmann, Matthias"}],"department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"conference":{"location":"Garmisch-Partenkirchen","name":"55. Arbeitstagung des Arbeitsgebietes \"Lebensmittelhygiene\"","start_date":"2014-09-23","end_date":"2014-09-26"},"user_id":"83778","date_updated":"2024-05-17T12:36:32Z","type":"conference","date_created":"2020-05-25T13:41:49Z","_id":"2594","language":[{"iso":"ger"}]},{"publication_status":"published","citation":{"ieee":"M. Upmann and P. Lade, “Knochenpartikel in Brühwurst. Einfluss von Rohmaterial und Herstellungstechnologie,” presented at the 37. LAFF-Tagung Fleisch + Feinkost, Lemgo, 2014.","ama":"Upmann M, Lade P. Knochenpartikel in Brühwurst. Einfluss von Rohmaterial und Herstellungstechnologie. In: ; 2014.","apa":"Upmann, M., & Lade, P. (2014). Knochenpartikel in Brühwurst. Einfluss von Rohmaterial und Herstellungstechnologie. 37. LAFF-Tagung Fleisch + Feinkost, Lemgo.","chicago":"Upmann, Matthias, and P. Lade. “Knochenpartikel in Brühwurst. Einfluss von Rohmaterial und Herstellungstechnologie,” 2014.","van":"Upmann M, Lade P. Knochenpartikel in Brühwurst. Einfluss von Rohmaterial und Herstellungstechnologie. In 2014.","ufg":"Upmann, Matthias/Lade, P.: Knochenpartikel in Brühwurst. Einfluss von Rohmaterial und Herstellungstechnologie, in: o. Hg.: o. O. 2014.","mla":"Upmann, Matthias, and P. Lade. Knochenpartikel in Brühwurst. Einfluss von Rohmaterial und Herstellungstechnologie. 2014.","bjps":"Upmann M and Lade P (2014) Knochenpartikel in Brühwurst. Einfluss von Rohmaterial und Herstellungstechnologie.","havard":"M. Upmann, P. Lade, Knochenpartikel in Brühwurst. Einfluss von Rohmaterial und Herstellungstechnologie, in: 2014.","short":"M. Upmann, P. Lade, in: 2014.","din1505-2-1":"Upmann, Matthias ; Lade, P.: Knochenpartikel in Brühwurst. Einfluss von Rohmaterial und Herstellungstechnologie. In: , 2014","chicago-de":"Upmann, Matthias und P. Lade. 2014. Knochenpartikel in Brühwurst. Einfluss von Rohmaterial und Herstellungstechnologie. In: ."},"title":"Knochenpartikel in Brühwurst. Einfluss von Rohmaterial und Herstellungstechnologie","status":"public","conference":{"name":"37. LAFF-Tagung Fleisch + Feinkost","location":"Lemgo","start_date":"2014-11-03","end_date":"2014-11-03"},"department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"author":[{"first_name":"Matthias","id":"12666","last_name":"Upmann","full_name":"Upmann, Matthias"},{"full_name":"Lade, P.","first_name":"P.","last_name":"Lade"}],"year":"2014","date_updated":"2024-05-17T12:36:54Z","user_id":"83778","date_created":"2020-05-25T13:45:52Z","type":"conference","language":[{"iso":"ger"}],"_id":"2595"},{"citation":{"chicago":"Borcherding, Holger, and Johann Austermann. “ Energieeffiziente Intralogistik – Optimale Nutzung Generatorischer Energie Durch Neuartiges Modulares Netzrückspeisekonzept,” 2014.","apa":"Borcherding, H., & Austermann, J. (2014). Energieeffiziente Intralogistik – Optimale Nutzung generatorischer Energie durch neuartiges modulares Netzrückspeisekonzept. Presented at the Elektrische Antriebe Symposium , München.","ufg":"Borcherding, Holger/Austermann, Johann (2014): Energieeffiziente Intralogistik – Optimale Nutzung generatorischer Energie durch neuartiges modulares Netzrückspeisekonzept, in: .","mla":"Borcherding, Holger, and Johann Austermann. Energieeffiziente Intralogistik – Optimale Nutzung Generatorischer Energie Durch Neuartiges Modulares Netzrückspeisekonzept. 2014.","bjps":"Borcherding H and Austermann J (2014) Energieeffiziente Intralogistik – Optimale Nutzung Generatorischer Energie Durch Neuartiges Modulares Netzrückspeisekonzept.","havard":"H. Borcherding, J. Austermann, Energieeffiziente Intralogistik – Optimale Nutzung generatorischer Energie durch neuartiges modulares Netzrückspeisekonzept, in: 2014.","van":"Borcherding H, Austermann J. Energieeffiziente Intralogistik – Optimale Nutzung generatorischer Energie durch neuartiges modulares Netzrückspeisekonzept. In 2014.","din1505-2-1":"Borcherding, Holger ; Austermann, Johann: Energieeffiziente Intralogistik – Optimale Nutzung generatorischer Energie durch neuartiges modulares Netzrückspeisekonzept. In: , 2014","chicago-de":"Borcherding, Holger und Johann Austermann. 2014. Energieeffiziente Intralogistik – Optimale Nutzung generatorischer Energie durch neuartiges modulares Netzrückspeisekonzept. In: .","short":"H. Borcherding, J. Austermann, in: 2014.","ieee":"H. Borcherding and J. Austermann, “ Energieeffiziente Intralogistik – Optimale Nutzung generatorischer Energie durch neuartiges modulares Netzrückspeisekonzept,” presented at the Elektrische Antriebe Symposium , München, 2014.","ama":"Borcherding H, Austermann J. Energieeffiziente Intralogistik – Optimale Nutzung generatorischer Energie durch neuartiges modulares Netzrückspeisekonzept. In: ; 2014."},"title":" Energieeffiziente Intralogistik – Optimale Nutzung generatorischer Energie durch neuartiges modulares Netzrückspeisekonzept","status":"public","department":[{"_id":"DEP5018"},{"_id":"DEP6020"}],"conference":{"name":" Elektrische Antriebe Symposium ","location":"München"},"author":[{"id":"1693","full_name":"Borcherding, Holger","last_name":"Borcherding","first_name":"Holger"},{"full_name":"Austermann, Johann","id":"42114","last_name":"Austermann","first_name":"Johann"}],"year":2014,"date_updated":"2023-03-15T13:49:42Z","user_id":"45673","type":"conference","date_created":"2018-11-26T15:40:37Z","language":[{"iso":"eng"}],"_id":"269"},{"date_updated":"2023-03-15T13:49:49Z","user_id":"74004","date_created":"2020-11-19T11:59:46Z","type":"patent","_id":"3971","ipn":"DE102012016610","ipc":"G06F17/50","citation":{"short":"T. Schulte, (2014).","din1505-2-1":"Schulte, Thomas: Echtzeit-Schaltungssimulation (2014)","chicago-de":"Schulte, Thomas. 2014. Echtzeit-Schaltungssimulation.","van":"Schulte T. Echtzeit-Schaltungssimulation. 2014.","ama":"Schulte T. Echtzeit-Schaltungssimulation. 2014.","ufg":"Schulte, Thomas (2014): Echtzeit-Schaltungssimulation.","havard":"T. Schulte, Echtzeit-Schaltungssimulation, (2014).","bjps":"Schulte T (2014) Echtzeit-Schaltungssimulation.","mla":"Schulte, Thomas. Echtzeit-Schaltungssimulation. 2014.","apa":"Schulte, T. (2014). Echtzeit-Schaltungssimulation.","ieee":"T. Schulte, “Echtzeit-Schaltungssimulation.” 2014.","chicago":"Schulte, Thomas. “Echtzeit-Schaltungssimulation,” 2014."},"title":"Echtzeit-Schaltungssimulation","status":"public","publication_date":"2014-02-27","department":[{"_id":"DEP6020"}],"year":2014,"author":[{"first_name":"Thomas","last_name":"Schulte","full_name":"Schulte, Thomas","id":"46242"}]},{"citation":{"short":"A. Kiffe, T. Schulte, in: 2014.","din1505-2-1":"Kiffe, Axel ; Schulte, Thomas: HIL Simulation of a Rectifier with Power Factor Correction. In: , 2014","chicago-de":"Kiffe, Axel und Thomas Schulte. 2014. HIL Simulation of a Rectifier with Power Factor Correction. In: .","van":"Kiffe A, Schulte T. HIL Simulation of a Rectifier with Power Factor Correction. In 2014.","ufg":"Kiffe, Axel/Schulte, Thomas (2014): HIL Simulation of a Rectifier with Power Factor Correction, in: .","havard":"A. Kiffe, T. Schulte, HIL Simulation of a Rectifier with Power Factor Correction, in: 2014.","mla":"Kiffe, Axel, and Thomas Schulte. HIL Simulation of a Rectifier with Power Factor Correction. 2014.","bjps":"Kiffe A and Schulte T (2014) HIL Simulation of a Rectifier with Power Factor Correction.","apa":"Kiffe, A., & Schulte, T. (2014). HIL Simulation of a Rectifier with Power Factor Correction. Presented at the 6th Conference on Simulation and Testing, Berlin.","chicago":"Kiffe, Axel, and Thomas Schulte. “HIL Simulation of a Rectifier with Power Factor Correction,” 2014.","ama":"Kiffe A, Schulte T. HIL Simulation of a Rectifier with Power Factor Correction. In: ; 2014.","ieee":"A. Kiffe and T. Schulte, “HIL Simulation of a Rectifier with Power Factor Correction,” presented at the 6th Conference on Simulation and Testing, Berlin, 2014."},"title":"HIL Simulation of a Rectifier with Power Factor Correction","status":"public","year":2014,"author":[{"first_name":"Axel","full_name":"Kiffe, Axel","last_name":"Kiffe","id":"59764"},{"last_name":"Schulte","first_name":"Thomas","id":"46242","full_name":"Schulte, Thomas"}],"department":[{"_id":"DEP6020"}],"conference":{"end_date":"2014-05-16","start_date":"2014-05-15","name":"6th Conference on Simulation and Testing","location":"Berlin"},"abstract":[{"lang":"eng","text":"Power electronic devices are growing in importance in automotive applications. Power converters are used in hybrid electric vehicles but also in other vehicle applications like electric steering systems for example. For testing electronic equipment, hardware-in-the-loop simulation is a today’s standard method in the automotive industry. Hardware-in-the-loop simulation requires a real-time capable model of the plant but the development of those models of power electronic circuits is still an ambitious task due to the switching of the semiconductors devices. Real-time simulation usually requires a fixed step-size which does not allow classic zero crossing detection algorithms. Depending on the chosen real-time platform, the minimum possible step-size of the real-time simulation is limited and requires special algorithms for an appropri-ate and precise simulation of these high dynamic systems. In this contribution, a hardware-in-the-loop simulation of a rectifier with power factor correction will be presented. First a short outline on modelling methods for real-time simulation of power electronics is given and an approach for determining the model as well as the necessary assumptions and simplifications are described. Finally, the hardware-in-the-loop bench is described and measurement results from the real plant and the simulation results are compared."}],"user_id":"74004","date_updated":"2023-03-15T13:49:49Z","type":"conference","date_created":"2020-11-23T12:16:30Z","language":[{"iso":"eng"}],"_id":"4002"},{"date_created":"2020-11-23T13:19:53Z","type":"conference","date_updated":"2023-03-15T13:49:49Z","user_id":"74004","language":[{"iso":"eng"}],"place":"Hochschule Ostwestfalen-Lippe University of Applied Sciences","_id":"4008","title":"Scalable model of a CHP unit for HIL simulation of a smart combined grid system","citation":{"chicago":"Griese, Martin, Thomas Pawlik, Thomas Schulte, and Jürgen Maas. “Scalable Model of a CHP Unit for HIL Simulation of a Smart Combined Grid System,” 189–200. Hochschule Ostwestfalen-Lippe University of Applied Sciences: Academia.edu, 2014.","apa":"Griese, M., Pawlik, T., Schulte, T., & Maas, J. (2014). Scalable model of a CHP unit for HIL simulation of a smart combined grid system (pp. 189–200). Presented at the II. International Energy Technologies Conference, ENTECH´14, Hochschule Ostwestfalen-Lippe University of Applied Sciences: Academia.edu.","havard":"M. Griese, T. Pawlik, T. Schulte, J. Maas, Scalable model of a CHP unit for HIL simulation of a smart combined grid system, in: Academia.edu, Hochschule Ostwestfalen-Lippe University of Applied Sciences, 2014: pp. 189–200.","mla":"Griese, Martin, et al. Scalable Model of a CHP Unit for HIL Simulation of a Smart Combined Grid System. Academia.edu, 2014, pp. 189–200.","bjps":"Griese M et al. (2014) Scalable Model of a CHP Unit for HIL Simulation of a Smart Combined Grid System. Hochschule Ostwestfalen-Lippe University of Applied Sciences: Academia.edu, pp. 189–200.","ufg":"Griese, Martin et. al. (2014): Scalable model of a CHP unit for HIL simulation of a smart combined grid system, in: , Hochschule Ostwestfalen-Lippe University of Applied Sciences, S. 189–200.","van":"Griese M, Pawlik T, Schulte T, Maas J. Scalable model of a CHP unit for HIL simulation of a smart combined grid system. In Hochschule Ostwestfalen-Lippe University of Applied Sciences: Academia.edu; 2014. p. 189–200.","chicago-de":"Griese, Martin, Thomas Pawlik, Thomas Schulte und Jürgen Maas. 2014. Scalable model of a CHP unit for HIL simulation of a smart combined grid system. In: , 189–200. Hochschule Ostwestfalen-Lippe University of Applied Sciences: Academia.edu.","din1505-2-1":"Griese, Martin ; Pawlik, Thomas ; Schulte, Thomas ; Maas, Jürgen: Scalable model of a CHP unit for HIL simulation of a smart combined grid system. In: . Hochschule Ostwestfalen-Lippe University of Applied Sciences : Academia.edu, 2014, S. 189–200","short":"M. Griese, T. Pawlik, T. Schulte, J. Maas, in: Academia.edu, Hochschule Ostwestfalen-Lippe University of Applied Sciences, 2014, pp. 189–200.","ieee":"M. Griese, T. Pawlik, T. Schulte, and J. Maas, “Scalable model of a CHP unit for HIL simulation of a smart combined grid system,” presented at the II. International Energy Technologies Conference, ENTECH´14, Istanbul, 2014, pp. 189–200.","ama":"Griese M, Pawlik T, Schulte T, Maas J. Scalable model of a CHP unit for HIL simulation of a smart combined grid system. In: Hochschule Ostwestfalen-Lippe University of Applied Sciences: Academia.edu; 2014:189-200."},"department":[{"_id":"DEP6020"}],"conference":{"location":"Istanbul","name":"II. International Energy Technologies Conference, ENTECH´14"},"author":[{"first_name":"Martin","full_name":"Griese, Martin","id":"52308","last_name":"Griese"},{"first_name":"Thomas","last_name":"Pawlik","full_name":"Pawlik, Thomas","id":"58915"},{"first_name":"Thomas","last_name":"Schulte","id":"46242","full_name":"Schulte, Thomas"},{"full_name":"Maas, Jürgen","first_name":"Jürgen","id":"1827","last_name":"Maas"}],"year":2014,"abstract":[{"lang":"eng","text":"Due to the increasing energy demand and shortage of fossil fuels, the energy systems will be transformed from mainly centralized into more decentralized systems, also incorporating more renewable energy. However, optimizing the control and structure of these systems is rather complex. A method for analyzing and planning of such systems is an adapted variant of the so called Hardware-in-the-Loop simulation. This approach comprises virtual energy components as models combined with data from experimental components. As a virtual energy component, a simulation model describing the physical behavior of CHP units is proposed in this contribution. The modeling approach is based on a time domain approach using state variables of the multiple domains to describe the dynamic behavior. For instance, the first law of thermodynamics is applied to model the thermal quantities. Furthermore, the model is scalable regarding the modeling depth and the power ratings which allows an application for different simulation scenarios. Finally, the overall model is parameterized and validated with data of a medium sized CHP plant."}],"page":"189 - 200","status":"public","publisher":"Academia.edu"},{"language":[{"iso":"ger"}],"publication_identifier":{"issn":["2196-677X "]},"publication":"at - Automatisierungstechnik","date_created":"2020-11-23T13:26:01Z","date_updated":"2023-03-15T13:49:49Z","author":[{"first_name":"W.","last_name":"Riediger","full_name":"Riediger, W."},{"first_name":"P.","full_name":"Puntel-Schmidt, P.","last_name":"Puntel-Schmidt"},{"full_name":"Köslin, F.","first_name":"F.","last_name":"Köslin"},{"first_name":"Thomas","full_name":"Schulte, Thomas","last_name":"Schulte","id":"46242"}],"year":2014,"status":"public","page":"111 - 120","title":"Validierung von Steuerungscode mit Hilfe automatisch generierter Simulationsmodelle","volume":63,"citation":{"ama":"Riediger W, Puntel-Schmidt P, Köslin F, Schulte T. Validierung von Steuerungscode mit Hilfe automatisch generierter Simulationsmodelle. at - Automatisierungstechnik. 2014;63(2):111-120.","ieee":"W. Riediger, P. Puntel-Schmidt, F. Köslin, and T. Schulte, “Validierung von Steuerungscode mit Hilfe automatisch generierter Simulationsmodelle,” at - Automatisierungstechnik, vol. 63, no. 2, pp. 111–120, 2014.","van":"Riediger W, Puntel-Schmidt P, Köslin F, Schulte T. Validierung von Steuerungscode mit Hilfe automatisch generierter Simulationsmodelle. at - Automatisierungstechnik. 2014;63(2):111–20.","bjps":"Riediger W et al. (2014) Validierung von Steuerungscode mit Hilfe automatisch generierter Simulationsmodelle. at - Automatisierungstechnik 63, 111–120.","havard":"W. Riediger, P. Puntel-Schmidt, F. Köslin, T. Schulte, Validierung von Steuerungscode mit Hilfe automatisch generierter Simulationsmodelle, at - Automatisierungstechnik. 63 (2014) 111–120.","mla":"Riediger, W., et al. “Validierung von Steuerungscode mit Hilfe automatisch generierter Simulationsmodelle.” at - Automatisierungstechnik, vol. 63, no. 2, DeGruyter, 2014, pp. 111–20.","ufg":"Riediger, W. et. al. (2014): Validierung von Steuerungscode mit Hilfe automatisch generierter Simulationsmodelle, in: at - Automatisierungstechnik 63 (2), S. 111–120.","apa":"Riediger, W., Puntel-Schmidt, P., Köslin, F., & Schulte, T. (2014). Validierung von Steuerungscode mit Hilfe automatisch generierter Simulationsmodelle. at - Automatisierungstechnik, 63(2), 111–120.","chicago":"Riediger, W., P. Puntel-Schmidt, F. Köslin, and Thomas Schulte. “Validierung von Steuerungscode mit Hilfe automatisch generierter Simulationsmodelle.” at - Automatisierungstechnik 63, no. 2 (2014): 111–20.","short":"W. Riediger, P. Puntel-Schmidt, F. Köslin, T. Schulte, at - Automatisierungstechnik 63 (2014) 111–120.","din1505-2-1":"Riediger, W. ; Puntel-Schmidt, P. ; Köslin, F. ; Schulte, Thomas: Validierung von Steuerungscode mit Hilfe automatisch generierter Simulationsmodelle. In: at - Automatisierungstechnik Bd. 63. Oldenbourg, DeGruyter (2014), Nr. 2, S. 111–120","chicago-de":"Riediger, W., P. Puntel-Schmidt, F. Köslin und Thomas Schulte. 2014. Validierung von Steuerungscode mit Hilfe automatisch generierter Simulationsmodelle. at - Automatisierungstechnik 63, Nr. 2: 111–120."},"_id":"4009","place":"Oldenbourg","type":"journal_article","intvolume":" 63","user_id":"74004","issue":"2","abstract":[{"text":"Virtual commissioning (VC) is used to test control code deployed on Programmable Logical Controllers. Simulation models of a plant are the core of any VC approach. Simulation models should represent the plant in a way so that the correct process execution can be tested under customers’ conditions. Simulation models of a plant are usually not built monolithically, but by many partial simulation models that represent the modules or components of the investigated plant. To ensure that the VC is efficient and provides helpful results, these partial simulation models can be implemented at different levels of detail, depending on the current test scenario. Usually, the definition of the modules’ and components’ level of detail is fixed. However, situations exist where more than one level of detail can be adequate. A dynamically adaptable level of detail seems beneficial to e. g. keep computing time at a reasonable level and to ensure meaningful results of the plants simulation model. However, no method or approach exists so far to handle a dynamically adaptable level of detail. This paper discusses potentials and challenges of a dynamically adaptable level of detail and shows possible solution contributions that could yield benefits for a VC approach.","lang":"eng"}],"department":[{"_id":"DEP6020"}],"publisher":"DeGruyter","article_type":"original","publication_status":"published"},{"publication":"SPS IPC Drives ","date_created":"2020-11-23T13:30:45Z","type":"journal_article","user_id":"74004","date_updated":"2023-03-15T13:49:49Z","_id":"4010","place":"Düsseldorf","language":[{"iso":"eng"}],"title":"Hardware-in-the-Loop-Simulation fertigungstechnischer Anlagen","citation":{"ieee":"W. Riediger, P. Puntel-Schmidt, F. Köslin, and T. Schulte, “Hardware-in-the-Loop-Simulation fertigungstechnischer Anlagen,” SPS IPC Drives , 2014.","ama":"Riediger W, Puntel-Schmidt P, Köslin F, Schulte T. Hardware-in-the-Loop-Simulation fertigungstechnischer Anlagen. SPS IPC Drives . 2014.","chicago-de":"Riediger, W., P. Puntel-Schmidt, F. Köslin und Thomas Schulte. 2014. Hardware-in-the-Loop-Simulation fertigungstechnischer Anlagen. SPS IPC Drives .","din1505-2-1":"Riediger, W. ; Puntel-Schmidt, P. ; Köslin, F. ; Schulte, Thomas: Hardware-in-the-Loop-Simulation fertigungstechnischer Anlagen. In: SPS IPC Drives . Düsseldorf, Springer-VDI-Verl. (2014)","short":"W. Riediger, P. Puntel-Schmidt, F. Köslin, T. Schulte, SPS IPC Drives (2014).","chicago":"Riediger, W., P. Puntel-Schmidt, F. Köslin, and Thomas Schulte. “Hardware-in-the-Loop-Simulation Fertigungstechnischer Anlagen.” SPS IPC Drives , 2014.","apa":"Riediger, W., Puntel-Schmidt, P., Köslin, F., & Schulte, T. (2014). Hardware-in-the-Loop-Simulation fertigungstechnischer Anlagen. SPS IPC Drives .","bjps":"Riediger W et al. (2014) Hardware-in-the-Loop-Simulation Fertigungstechnischer Anlagen. SPS IPC Drives .","mla":"Riediger, W., et al. “Hardware-in-the-Loop-Simulation Fertigungstechnischer Anlagen.” SPS IPC Drives , Springer-VDI-Verl., 2014.","havard":"W. Riediger, P. Puntel-Schmidt, F. Köslin, T. Schulte, Hardware-in-the-Loop-Simulation fertigungstechnischer Anlagen, SPS IPC Drives . (2014).","ufg":"Riediger, W. et. al. (2014): Hardware-in-the-Loop-Simulation fertigungstechnischer Anlagen, in: SPS IPC Drives .","van":"Riediger W, Puntel-Schmidt P, Köslin F, Schulte T. Hardware-in-the-Loop-Simulation fertigungstechnischer Anlagen. SPS IPC Drives . 2014;"},"author":[{"first_name":"W.","full_name":"Riediger, W.","last_name":"Riediger"},{"last_name":"Puntel-Schmidt","first_name":"P.","full_name":"Puntel-Schmidt, P."},{"last_name":"Köslin","first_name":"F.","full_name":"Köslin, F."},{"id":"46242","full_name":"Schulte, Thomas","last_name":"Schulte","first_name":"Thomas"}],"year":2014,"department":[{"_id":"DEP6020"}],"publisher":"Springer-VDI-Verl.","status":"public"},{"status":"public","page":"1 - 8","publisher":"IEEE","main_file_link":[{"url":"https://ieeexplore.ieee.org/document/7007039"}],"author":[{"first_name":"Stefan","id":"43696","last_name":"Geng","full_name":"Geng, Stefan"},{"first_name":"M.","last_name":"Brose","full_name":"Brose, M."},{"first_name":"Thomas","last_name":"Schulte","id":"46242","full_name":"Schulte, Thomas"}],"year":2014,"conference":{"end_date":"2014-10-30","start_date":"2014-10-27","name":"2014 IEEE Vehicle Power and Propulsion Conference (VPPC)","location":"Coimbra"},"department":[{"_id":"DEP6020"}],"abstract":[{"text":"Hybrid electric powertrains are developed for reducing the fuel consumption and consequently the emission of carbon dioxide. The fuel consumption of those systems depends significantly on the topology of the powertrain and the applied control strategy. Hardware-in-the-Loop simulation can be used for improving the control strategy, where a real-time model of the powertrain with accurate consideration of the power losses is required. Developing those models is a time-consuming task due to the high dynamics and switching frequencies of the electrical subsystem and the various configurations of the mechanical subsystem. In this contribution methods for an efficient modeling of transmission systems and electric drives are presented. Real-Time capability as well as the correct power flows and losses are considered. Finally, simulation results are shown.","lang":"eng"}],"citation":{"short":"S. Geng, M. Brose, T. Schulte, in: 2014 IEEE Vehicle Power and Propulsion Conference (VPPC), IEEE, 2014, pp. 1–8.","chicago-de":"Geng, Stefan, M. Brose und Thomas Schulte. 2014. Correct Power Flow and Losses in Real-Time Simulation of HEV Powertrains. In: 2014 IEEE Vehicle Power and Propulsion Conference (VPPC), 1–8. IEEE.","din1505-2-1":"Geng, Stefan ; Brose, M. ; Schulte, Thomas: Correct Power Flow and Losses in Real-Time Simulation of HEV Powertrains. In: 2014 IEEE Vehicle Power and Propulsion Conference (VPPC) : IEEE, 2014, S. 1–8","apa":"Geng, S., Brose, M., & Schulte, T. (2014). Correct Power Flow and Losses in Real-Time Simulation of HEV Powertrains. In 2014 IEEE Vehicle Power and Propulsion Conference (VPPC) (pp. 1–8). Coimbra: IEEE.","chicago":"Geng, Stefan, M. Brose, and Thomas Schulte. “Correct Power Flow and Losses in Real-Time Simulation of HEV Powertrains.” In 2014 IEEE Vehicle Power and Propulsion Conference (VPPC), 1–8. IEEE, 2014.","van":"Geng S, Brose M, Schulte T. Correct Power Flow and Losses in Real-Time Simulation of HEV Powertrains. In: 2014 IEEE Vehicle Power and Propulsion Conference (VPPC). IEEE; 2014. p. 1–8.","mla":"Geng, Stefan, et al. “Correct Power Flow and Losses in Real-Time Simulation of HEV Powertrains.” 2014 IEEE Vehicle Power and Propulsion Conference (VPPC), IEEE, 2014, pp. 1–8.","havard":"S. Geng, M. Brose, T. Schulte, Correct Power Flow and Losses in Real-Time Simulation of HEV Powertrains, in: 2014 IEEE Vehicle Power and Propulsion Conference (VPPC), IEEE, 2014: pp. 1–8.","bjps":"Geng S, Brose M and Schulte T (2014) Correct Power Flow and Losses in Real-Time Simulation of HEV Powertrains. 2014 IEEE Vehicle Power and Propulsion Conference (VPPC). IEEE, pp. 1–8.","ufg":"Geng, Stefan et. al. (2014): Correct Power Flow and Losses in Real-Time Simulation of HEV Powertrains, in: 2014 IEEE Vehicle Power and Propulsion Conference (VPPC), S. 1–8.","ieee":"S. Geng, M. Brose, and T. Schulte, “Correct Power Flow and Losses in Real-Time Simulation of HEV Powertrains,” in 2014 IEEE Vehicle Power and Propulsion Conference (VPPC), Coimbra, 2014, pp. 1–8.","ama":"Geng S, Brose M, Schulte T. Correct Power Flow and Losses in Real-Time Simulation of HEV Powertrains. In: 2014 IEEE Vehicle Power and Propulsion Conference (VPPC). IEEE; 2014:1-8."},"title":"Correct Power Flow and Losses in Real-Time Simulation of HEV Powertrains","language":[{"iso":"eng"}],"_id":"4011","user_id":"74004","date_updated":"2023-03-15T13:49:49Z","publication_identifier":{"eisbn":["978-1-4799-6783-4"]},"publication":"2014 IEEE Vehicle Power and Propulsion Conference (VPPC)","type":"conference","date_created":"2020-11-23T13:36:55Z"},{"language":[{"iso":"ger"}],"date_updated":"2023-03-15T13:49:49Z","publication_identifier":{"issn":["2405-8963"]},"publication":"IFAC-PapersOnLine","date_created":"2020-11-23T13:51:17Z","status":"public","page":"69 - 74","year":2014,"author":[{"last_name":"Puntel-Schmidt","first_name":"P.","full_name":"Puntel-Schmidt, P."},{"full_name":"Fay, A.","first_name":"A.","last_name":"Fay"},{"first_name":"W.","last_name":"Riediger","full_name":"Riediger, W."},{"first_name":"Thomas","id":"46242","last_name":"Schulte","full_name":"Schulte, Thomas"},{"last_name":"Köslin","full_name":"Köslin, F.","first_name":"F."},{"first_name":"S.","last_name":"Diehl","full_name":"Diehl, S."}],"volume":48,"citation":{"mla":"Puntel-Schmidt, P., et al. “Validierung von Steuerungscode fertigungstechnischer Anlagen mit Hilfe automatisch generierter Simulationsmodelle.” IFAC-PapersOnLine, vol. 48, no. 10, Elsevier, 2014, pp. 69–74.","bjps":"Puntel-Schmidt P et al. (2014) Validierung von Steuerungscode fertigungstechnischer Anlagen mit Hilfe automatisch generierter Simulationsmodelle. IFAC-PapersOnLine 48, 69–74.","havard":"P. Puntel-Schmidt, A. Fay, W. Riediger, T. Schulte, F. Köslin, S. Diehl, Validierung von Steuerungscode fertigungstechnischer Anlagen mit Hilfe automatisch generierter Simulationsmodelle, IFAC-PapersOnLine. 48 (2014) 69–74.","ufg":"Puntel-Schmidt, P. et. al. (2014): Validierung von Steuerungscode fertigungstechnischer Anlagen mit Hilfe automatisch generierter Simulationsmodelle, in: IFAC-PapersOnLine 48 (10), S. 69–74.","van":"Puntel-Schmidt P, Fay A, Riediger W, Schulte T, Köslin F, Diehl S. Validierung von Steuerungscode fertigungstechnischer Anlagen mit Hilfe automatisch generierter Simulationsmodelle. IFAC-PapersOnLine. 2014;48(10):69–74.","chicago":"Puntel-Schmidt, P., A. Fay, W. Riediger, Thomas Schulte, F. Köslin, and S. Diehl. “Validierung von Steuerungscode fertigungstechnischer Anlagen mit Hilfe automatisch generierter Simulationsmodelle.” IFAC-PapersOnLine 48, no. 10 (2014): 69–74.","apa":"Puntel-Schmidt, P., Fay, A., Riediger, W., Schulte, T., Köslin, F., & Diehl, S. (2014). Validierung von Steuerungscode fertigungstechnischer Anlagen mit Hilfe automatisch generierter Simulationsmodelle. IFAC-PapersOnLine, 48(10), 69–74.","din1505-2-1":"Puntel-Schmidt, P. ; Fay, A. ; Riediger, W. ; Schulte, Thomas ; Köslin, F. ; Diehl, S.: Validierung von Steuerungscode fertigungstechnischer Anlagen mit Hilfe automatisch generierter Simulationsmodelle. In: IFAC-PapersOnLine Bd. 48. Amsterdam u.a., Elsevier (2014), Nr. 10, S. 69–74","chicago-de":"Puntel-Schmidt, P., A. Fay, W. Riediger, Thomas Schulte, F. Köslin und S. Diehl. 2014. Validierung von Steuerungscode fertigungstechnischer Anlagen mit Hilfe automatisch generierter Simulationsmodelle. IFAC-PapersOnLine 48, Nr. 10: 69–74.","short":"P. Puntel-Schmidt, A. Fay, W. Riediger, T. Schulte, F. Köslin, S. Diehl, IFAC-PapersOnLine 48 (2014) 69–74.","ama":"Puntel-Schmidt P, Fay A, Riediger W, Schulte T, Köslin F, Diehl S. Validierung von Steuerungscode fertigungstechnischer Anlagen mit Hilfe automatisch generierter Simulationsmodelle. IFAC-PapersOnLine. 2014;48(10):69-74.","ieee":"P. Puntel-Schmidt, A. Fay, W. Riediger, T. Schulte, F. Köslin, and S. Diehl, “Validierung von Steuerungscode fertigungstechnischer Anlagen mit Hilfe automatisch generierter Simulationsmodelle,” IFAC-PapersOnLine, vol. 48, no. 10, pp. 69–74, 2014."},"title":"Validierung von Steuerungscode fertigungstechnischer Anlagen mit Hilfe automatisch generierter Simulationsmodelle","place":"Amsterdam u.a.","_id":"4013","user_id":"74004","intvolume":" 48","type":"journal_article","publisher":"Elsevier","department":[{"_id":"DEP6020"}],"issue":"10","abstract":[{"text":"Der Simulation kommt im Rahmen einer durchgehenden digitalen Fabrikplanung immer größere Bedeutung zu. Eine Möglichkeit, die Qualität sowie Termintreue bei der Erstellung von automatisierten fertigungstechnischen Anlagen sicherzustellen, stellt die Absicherung des Steuerungscodes mit einer virtuellen Inbetriebnahme (VIBN) dar. Jedoch ist der für eine VIBN zwingend notwendige Modellbildungsprozess oftmals mit hohen Aufwänden verbunden, die das Einsparpotential einer VIBN oftmals übertreffen und dem Nutzen einer Simulation insgesamt entgegenstehen. Eine mögliche Lösung könnte die automatische Simulationsmodellgenerierung fertigungstechnischer Anlagen sein. Der vorliegende Beitrag zeigt, wie aus Anlagenstrukturdaten, dargestellt im objektorientiert aufgebauten Datenaustauschformat AutomationML, Simulationsmodelle fertigungstechnischer Anlagen in der objektorientierten Modellierungssprache Modelica automatisch generiert werden können. Das generierte Modell läuft anschließend auf einer auf einem Standard-PC basierenden Hardware-in-the-Loop-Plattform und wird mit der mit der realen Steuerung verbunden, so dass diese virtuell in Betrieb genommen werden kann. Beispielhaft wird die VIBN einer unstetigen Fördertechniklösung als typisches Beispiel einer fertigungstechnischen Anlage gezeigt.","lang":"ger"}],"article_type":"original","publication_status":"published"},{"publication_status":"published","file":[{"access_level":"local","relation":"main_file","creator":"czr-e2t","date_updated":"2020-12-08T10:14:26Z","file_name":"borcherding.pdf","content_type":"application/pdf","date_created":"2020-12-08T10:14:26Z","file_id":"4194","file_size":1003034}],"publisher":"Dt. Industrieverl.","abstract":[{"text":"In diesem Beitrag wird eine Methode zur numerischen Berechnung von Stromoberschwingungen vorgestellt. Zunächst werden die Auswirkungen von Stromoberschwingungen und die Notwendigkeit einer solchen Berechnungsmethode erörtert. Auf der Basis von Ersatzschaltbildern werden die Betriebszustände erklärt und die notwendigen Gleichungen zur Berechnung der Zwischenkreisspannung und des Netzstroms aufgezeigt. Dann folgt eine Beschreibung des entwickelten Berechnungsalgorithmus; der es ermöglicht die Netzströme und Stromoberschwingungen zu konstruieren. Zur Validierung der Berechnungen werden Vergleichsmessungen aufgezeigt und mit den Berechnungsergebnissen verglichen.","lang":"ger"}],"conference":{"location":"Regensburg","name":"11. Konferenz für Angewandte Automatisierungstechnik in Lehre und Entwicklung"},"department":[{"_id":"DEP6020"}],"ddc":["620"],"user_id":"74004","type":"conference","_id":"4193","place":"München","has_accepted_license":"1","citation":{"chicago-de":"Borcherding, Holger, Johann Austermann und Jan-Niklas Koch. 2014. Numerische Berechnung von Stromoberschwingungen nichtlinearer Verbraucher. In: Tagungsband / AALE 2014 : das Forum für Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft, 103–112. München: Dt. Industrieverl.","din1505-2-1":"Borcherding, Holger ; Austermann, Johann ; Koch, Jan-Niklas: Numerische Berechnung von Stromoberschwingungen nichtlinearer Verbraucher. In: Tagungsband / AALE 2014 : das Forum für Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft. München : Dt. Industrieverl., 2014, S. 103–112","short":"H. Borcherding, J. Austermann, J.-N. Koch, in: Tagungsband / AALE 2014 : das Forum für Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft, Dt. Industrieverl., München, 2014, pp. 103–112.","mla":"Borcherding, Holger, et al. “Numerische Berechnung von Stromoberschwingungen nichtlinearer Verbraucher.” Tagungsband / AALE 2014 : das Forum für Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft, Dt. Industrieverl., 2014, pp. 103–12.","havard":"H. Borcherding, J. Austermann, J.-N. Koch, Numerische Berechnung von Stromoberschwingungen nichtlinearer Verbraucher, in: Tagungsband / AALE 2014 : das Forum für Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft, Dt. Industrieverl., München, 2014: pp. 103–112.","bjps":"Borcherding H, Austermann J and Koch J-N (2014) Numerische Berechnung von Stromoberschwingungen nichtlinearer Verbraucher. Tagungsband / AALE 2014 : das Forum für Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft. München: Dt. Industrieverl., pp. 103–112.","ufg":"Borcherding, Holger et. al. (2014): Numerische Berechnung von Stromoberschwingungen nichtlinearer Verbraucher, in: Tagungsband / AALE 2014 : das Forum für Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft, München, S. 103–112.","ama":"Borcherding H, Austermann J, Koch J-N. Numerische Berechnung von Stromoberschwingungen nichtlinearer Verbraucher. In: Tagungsband / AALE 2014 : das Forum für Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft. München: Dt. Industrieverl.; 2014:103-112.","van":"Borcherding H, Austermann J, Koch J-N. Numerische Berechnung von Stromoberschwingungen nichtlinearer Verbraucher. In: Tagungsband / AALE 2014 : das Forum für Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft. München: Dt. Industrieverl.; 2014. p. 103–12.","chicago":"Borcherding, Holger, Johann Austermann, and Jan-Niklas Koch. “Numerische Berechnung von Stromoberschwingungen nichtlinearer Verbraucher.” In Tagungsband / AALE 2014 : das Forum für Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft, 103–12. München: Dt. Industrieverl., 2014.","ieee":"H. Borcherding, J. Austermann, and J.-N. Koch, “Numerische Berechnung von Stromoberschwingungen nichtlinearer Verbraucher,” in Tagungsband / AALE 2014 : das Forum für Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft, Regensburg, 2014, pp. 103–112.","apa":"Borcherding, H., Austermann, J., & Koch, J.-N. (2014). Numerische Berechnung von Stromoberschwingungen nichtlinearer Verbraucher. In Tagungsband / AALE 2014 : das Forum für Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft (pp. 103–112). München: Dt. Industrieverl."},"title":"Numerische Berechnung von Stromoberschwingungen nichtlinearer Verbraucher","page":"103 - 112","status":"public","year":2014,"author":[{"first_name":"Holger","id":"1693","full_name":"Borcherding, Holger","last_name":"Borcherding"},{"last_name":"Austermann","first_name":"Johann","full_name":"Austermann, Johann","id":"42114"},{"first_name":"Jan-Niklas","id":"58889","last_name":"Koch","full_name":"Koch, Jan-Niklas"}],"file_date_updated":"2020-12-08T10:14:26Z","date_updated":"2023-03-15T13:49:51Z","date_created":"2020-12-08T09:53:20Z","publication_identifier":{"isbn":["978-3-8356-7142-3"]},"publication":"Tagungsband / AALE 2014 : das Forum für Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft","language":[{"iso":"ger"}]},{"date_updated":"2023-03-15T13:49:51Z","user_id":"74004","file_date_updated":"2020-12-08T10:19:13Z","type":"book_chapter","date_created":"2020-12-08T10:16:05Z","publication_identifier":{"isbn":["978-3-8007-3577-8"]},"publication":"EMV, Internationale Fachmesse & Workshops für Elektromagnetische Verträglichkeit","language":[{"iso":"ger"}],"place":"Berlin","_id":"4195","has_accepted_license":"1","publication_status":"published","file":[{"access_level":"local","date_updated":"2020-12-08T10:19:13Z","creator":"czr-e2t","relation":"main_file","file_name":"BA001.pdf","content_type":"application/pdf","date_created":"2020-12-08T10:19:13Z","file_size":676062,"file_id":"4196"}],"citation":{"ieee":"H. Borcherding and A. Mambetow, “Erstellung einer IEC 62578 konformen Netznachbildung und Erfahrung in der Auslegung und Anwendung,” in EMV, Internationale Fachmesse & Workshops für Elektromagnetische Verträglichkeit, Berlin: VDE-Verlag, 2014, pp. 645–652.","ama":"Borcherding H, Mambetow A. Erstellung einer IEC 62578 konformen Netznachbildung und Erfahrung in der Auslegung und Anwendung. In: EMV, Internationale Fachmesse & Workshops für Elektromagnetische Verträglichkeit. Berlin: VDE-Verlag; 2014:645-652.","short":"H. Borcherding, A. Mambetow, in: EMV, Internationale Fachmesse & Workshops für Elektromagnetische Verträglichkeit, VDE-Verlag, Berlin, 2014, pp. 645–652.","din1505-2-1":"Borcherding, Holger ; Mambetow, Artur: Erstellung einer IEC 62578 konformen Netznachbildung und Erfahrung in der Auslegung und Anwendung. In: EMV, Internationale Fachmesse & Workshops für Elektromagnetische Verträglichkeit. Berlin : VDE-Verlag, 2014, S. 645–652","chicago-de":"Borcherding, Holger und Artur Mambetow. 2014. Erstellung einer IEC 62578 konformen Netznachbildung und Erfahrung in der Auslegung und Anwendung. In: EMV, Internationale Fachmesse & Workshops für Elektromagnetische Verträglichkeit, 645–652. Berlin: VDE-Verlag.","apa":"Borcherding, H., & Mambetow, A. (2014). Erstellung einer IEC 62578 konformen Netznachbildung und Erfahrung in der Auslegung und Anwendung. In EMV, Internationale Fachmesse & Workshops für Elektromagnetische Verträglichkeit (pp. 645–652). Berlin: VDE-Verlag.","chicago":"Borcherding, Holger, and Artur Mambetow. “Erstellung einer IEC 62578 konformen Netznachbildung und Erfahrung in der Auslegung und Anwendung.” In EMV, Internationale Fachmesse & Workshops für Elektromagnetische Verträglichkeit, 645–52. Berlin: VDE-Verlag, 2014.","van":"Borcherding H, Mambetow A. Erstellung einer IEC 62578 konformen Netznachbildung und Erfahrung in der Auslegung und Anwendung. In: EMV, Internationale Fachmesse & Workshops für Elektromagnetische Verträglichkeit. Berlin: VDE-Verlag; 2014. p. 645–52.","ufg":"Borcherding, Holger/Mambetow, Artur (2014): Erstellung einer IEC 62578 konformen Netznachbildung und Erfahrung in der Auslegung und Anwendung, in: EMV, Internationale Fachmesse & Workshops für Elektromagnetische Verträglichkeit, Berlin, S. 645–652.","havard":"H. Borcherding, A. Mambetow, Erstellung einer IEC 62578 konformen Netznachbildung und Erfahrung in der Auslegung und Anwendung, in: EMV, Internationale Fachmesse & Workshops für Elektromagnetische Verträglichkeit, VDE-Verlag, Berlin, 2014: pp. 645–652.","bjps":"Borcherding H and Mambetow A (2014) Erstellung einer IEC 62578 konformen Netznachbildung und Erfahrung in der Auslegung und Anwendung. EMV, Internationale Fachmesse & Workshops für Elektromagnetische Verträglichkeit. Berlin: VDE-Verlag, pp. 645–652.","mla":"Borcherding, Holger, and Artur Mambetow. “Erstellung einer IEC 62578 konformen Netznachbildung und Erfahrung in der Auslegung und Anwendung.” EMV, Internationale Fachmesse & Workshops für Elektromagnetische Verträglichkeit, VDE-Verlag, 2014, pp. 645–52."},"title":"Erstellung einer IEC 62578 konformen Netznachbildung und Erfahrung in der Auslegung und Anwendung","page":"645 - 652","status":"public","publisher":"VDE-Verlag","department":[{"_id":"DEP6020"}],"author":[{"first_name":"Holger","last_name":"Borcherding","id":"1693","full_name":"Borcherding, Holger"},{"id":"51936","first_name":"Artur","full_name":"Mambetow, Artur","last_name":"Mambetow"}],"year":2014,"ddc":["620"]},{"status":"public","department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"conference":{"start_date":"2014-04-07","end_date":"2014-04-11","name":"Hannover Messe","location":"Hannover"},"author":[{"id":"1693","last_name":"Borcherding","full_name":"Borcherding, Holger","first_name":"Holger"}],"year":2014,"citation":{"ieee":"H. Borcherding, “Energieeffiziente Antriebs- und Steuerungstechnik für die Intralogistik,” presented at the Hannover Messe, Hannover, 2014.","ama":"Borcherding H. Energieeffiziente Antriebs- und Steuerungstechnik für die Intralogistik. In: ; 2014.","short":"H. Borcherding, in: 2014.","din1505-2-1":"Borcherding, Holger: Energieeffiziente Antriebs- und Steuerungstechnik für die Intralogistik. In: , 2014","chicago-de":"Borcherding, Holger. 2014. Energieeffiziente Antriebs- und Steuerungstechnik für die Intralogistik. In: .","apa":"Borcherding, H. (2014). Energieeffiziente Antriebs- und Steuerungstechnik für die Intralogistik. Presented at the Hannover Messe, Hannover.","chicago":"Borcherding, Holger. “Energieeffiziente Antriebs- Und Steuerungstechnik Für Die Intralogistik,” 2014.","van":"Borcherding H. Energieeffiziente Antriebs- und Steuerungstechnik für die Intralogistik. In 2014.","ufg":"Borcherding, Holger (2014): Energieeffiziente Antriebs- und Steuerungstechnik für die Intralogistik, in: .","mla":"Borcherding, Holger. Energieeffiziente Antriebs- Und Steuerungstechnik Für Die Intralogistik. 2014.","bjps":"Borcherding H (2014) Energieeffiziente Antriebs- Und Steuerungstechnik Für Die Intralogistik.","havard":"H. Borcherding, Energieeffiziente Antriebs- und Steuerungstechnik für die Intralogistik, in: 2014."},"title":"Energieeffiziente Antriebs- und Steuerungstechnik für die Intralogistik","language":[{"iso":"eng"}],"_id":"4248","date_updated":"2023-03-15T13:49:51Z","user_id":"74004","type":"conference_abstract","date_created":"2020-12-10T13:16:18Z"},{"language":[{"iso":"ger"}],"place":"Haar","_id":"4249","date_created":"2020-12-10T13:20:40Z","type":"journal_article","publication":"Computer & Automation","publication_identifier":{"issn":["1615-8512"]},"date_updated":"2023-03-15T13:49:51Z","user_id":"74004","department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"year":2014,"author":[{"last_name":"Austermann","first_name":"Johann","full_name":"Austermann, Johann","id":"42114"},{"last_name":"Borcherding","first_name":"Holger","full_name":"Borcherding, Holger","id":"1693"}],"issue":"11","page":"90 - 94","status":"public","publisher":"WEKA Fachmedien GmbH ","title":"Die energieeffiziente Intralogistik","publication_status":"published","citation":{"ama":"Austermann J, Borcherding H. Die energieeffiziente Intralogistik. Computer & Automation. 2014;(11):90-94.","ieee":"J. Austermann and H. Borcherding, “Die energieeffiziente Intralogistik,” Computer & Automation, no. 11, pp. 90–94, 2014.","chicago-de":"Austermann, Johann und Holger Borcherding. 2014. Die energieeffiziente Intralogistik. Computer & Automation, Nr. 11: 90–94.","din1505-2-1":"Austermann, Johann ; Borcherding, Holger: Die energieeffiziente Intralogistik. In: Computer & Automation. Haar, WEKA Fachmedien GmbH (2014), Nr. 11, S. 90–94","short":"J. Austermann, H. Borcherding, Computer & Automation (2014) 90–94.","bjps":"Austermann J and Borcherding H (2014) Die energieeffiziente Intralogistik. Computer & Automation 90–94.","havard":"J. Austermann, H. Borcherding, Die energieeffiziente Intralogistik, Computer & Automation. (2014) 90–94.","mla":"Austermann, Johann, and Holger Borcherding. “Die energieeffiziente Intralogistik.” Computer & Automation, no. 11, WEKA Fachmedien GmbH , 2014, pp. 90–94.","ufg":"Austermann, Johann/Borcherding, Holger (2014): Die energieeffiziente Intralogistik, in: Computer & Automation (11), S. 90–94.","van":"Austermann J, Borcherding H. Die energieeffiziente Intralogistik. Computer & Automation. 2014;(11):90–4.","chicago":"Austermann, Johann, and Holger Borcherding. “Die energieeffiziente Intralogistik.” Computer & Automation, no. 11 (2014): 90–94.","apa":"Austermann, J., & Borcherding, H. (2014). Die energieeffiziente Intralogistik. Computer & Automation, (11), 90–94."}},{"title":"Indirect Current Source Inverter with Regenerative Snubber Circuit","publication_status":"published","citation":{"short":"J. Austermann, C. Studen, H. Borcherding, J. Böcker, in: PCIM Europe 2014 : 1200V 4H-SiC Trench Devices, VDE-Verlag, Berlin, 2014, pp. 1529–1536.","chicago-de":"Austermann, Johann, C. Studen, Holger Borcherding und J. Böcker. 2014. Indirect Current Source Inverter with Regenerative Snubber Circuit. In: PCIM Europe 2014 : 1200V 4H-SiC Trench Devices, 1529–1536. Berlin: VDE-Verlag.","din1505-2-1":"Austermann, Johann ; Studen, C. ; Borcherding, Holger ; Böcker, J.: Indirect Current Source Inverter with Regenerative Snubber Circuit. In: PCIM Europe 2014 : 1200V 4H-SiC Trench Devices. Berlin : VDE-Verlag, 2014, S. 1529–1536","apa":"Austermann, J., Studen, C., Borcherding, H., & Böcker, J. (2014). Indirect Current Source Inverter with Regenerative Snubber Circuit. In PCIM Europe 2014 : 1200V 4H-SiC Trench Devices (pp. 1529–1536). Berlin: VDE-Verlag.","chicago":"Austermann, Johann, C. Studen, Holger Borcherding, and J. Böcker. “Indirect Current Source Inverter with Regenerative Snubber Circuit.” In PCIM Europe 2014 : 1200V 4H-SiC Trench Devices, 1529–36. Berlin: VDE-Verlag, 2014.","van":"Austermann J, Studen C, Borcherding H, Böcker J. Indirect Current Source Inverter with Regenerative Snubber Circuit. In: PCIM Europe 2014 : 1200V 4H-SiC Trench Devices. Berlin: VDE-Verlag; 2014. p. 1529–36.","ufg":"Austermann, Johann et. al. (2014): Indirect Current Source Inverter with Regenerative Snubber Circuit, in: PCIM Europe 2014 : 1200V 4H-SiC Trench Devices, Berlin, S. 1529–1536.","mla":"Austermann, Johann, et al. “Indirect Current Source Inverter with Regenerative Snubber Circuit.” PCIM Europe 2014 : 1200V 4H-SiC Trench Devices, VDE-Verlag, 2014, pp. 1529–36.","havard":"J. Austermann, C. Studen, H. Borcherding, J. Böcker, Indirect Current Source Inverter with Regenerative Snubber Circuit, in: PCIM Europe 2014 : 1200V 4H-SiC Trench Devices, VDE-Verlag, Berlin, 2014: pp. 1529–1536.","bjps":"Austermann J et al. (2014) Indirect Current Source Inverter with Regenerative Snubber Circuit. PCIM Europe 2014 : 1200V 4H-SiC Trench Devices. Berlin: VDE-Verlag, pp. 1529–1536.","ieee":"J. Austermann, C. Studen, H. Borcherding, and J. Böcker, “Indirect Current Source Inverter with Regenerative Snubber Circuit,” in PCIM Europe 2014 : 1200V 4H-SiC Trench Devices, Nürnberg, 2014, pp. 1529–1536.","ama":"Austermann J, Studen C, Borcherding H, Böcker J. Indirect Current Source Inverter with Regenerative Snubber Circuit. In: PCIM Europe 2014 : 1200V 4H-SiC Trench Devices. Berlin: VDE-Verlag; 2014:1529-1536."},"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"conference":{"name":"PCIM Europe 2014 - International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management","location":"Nürnberg","end_date":"2014-05-22","start_date":"2014-05-20"},"year":2014,"author":[{"full_name":"Austermann, Johann","last_name":"Austermann","id":"42114","first_name":"Johann"},{"last_name":"Studen","full_name":"Studen, C.","first_name":"C."},{"id":"1693","first_name":"Holger","last_name":"Borcherding","full_name":"Borcherding, Holger"},{"first_name":"J.","full_name":"Böcker, J.","last_name":"Böcker"}],"page":"1529 - 1536","status":"public","publisher":"VDE-Verlag","type":"conference","date_created":"2020-12-10T14:09:16Z","publication_identifier":{"isbn":["978-3-8007-3603-4"]},"publication":"PCIM Europe 2014 : 1200V 4H-SiC Trench Devices","date_updated":"2023-03-15T13:49:51Z","user_id":"74004","language":[{"iso":"eng"}],"place":"Berlin","_id":"4263"},{"publication_status":"published","citation":{"ama":"Gausemeier J, Trächtler A, Schäfer W, Borcherding H. Semantische Technologien im Entwurf mechatronischer Systeme: Effektiver Austausch von Lösungswissen in Branchenwertschöpfungsketten. München: Hanser; 2014.","ieee":"J. Gausemeier, A. Trächtler, W. Schäfer, and H. Borcherding, Semantische Technologien im Entwurf mechatronischer Systeme: Effektiver Austausch von Lösungswissen in Branchenwertschöpfungsketten. München: Hanser, 2014.","van":"Gausemeier J, Trächtler A, Schäfer W, Borcherding H. Semantische Technologien im Entwurf mechatronischer Systeme: Effektiver Austausch von Lösungswissen in Branchenwertschöpfungsketten. München: Hanser; 2014. 309 p.","bjps":"Gausemeier J et al. (2014) Semantische Technologien im Entwurf mechatronischer Systeme: Effektiver Austausch von Lösungswissen in Branchenwertschöpfungsketten. München: Hanser.","mla":"Gausemeier, J., et al. Semantische Technologien im Entwurf mechatronischer Systeme: Effektiver Austausch von Lösungswissen in Branchenwertschöpfungsketten. Hanser, 2014.","havard":"J. Gausemeier, A. Trächtler, W. Schäfer, H. Borcherding, Semantische Technologien im Entwurf mechatronischer Systeme: Effektiver Austausch von Lösungswissen in Branchenwertschöpfungsketten, Hanser, München, 2014.","ufg":"Gausemeier, J. et. al. (2014): Semantische Technologien im Entwurf mechatronischer Systeme: Effektiver Austausch von Lösungswissen in Branchenwertschöpfungsketten, München.","apa":"Gausemeier, J., Trächtler, A., Schäfer, W., & Borcherding, H. (2014). Semantische Technologien im Entwurf mechatronischer Systeme: Effektiver Austausch von Lösungswissen in Branchenwertschöpfungsketten. München: Hanser.","chicago":"Gausemeier, J., A. Trächtler, W. Schäfer, and Holger Borcherding. Semantische Technologien im Entwurf mechatronischer Systeme: Effektiver Austausch von Lösungswissen in Branchenwertschöpfungsketten. München: Hanser, 2014.","short":"J. Gausemeier, A. Trächtler, W. Schäfer, H. Borcherding, Semantische Technologien im Entwurf mechatronischer Systeme: Effektiver Austausch von Lösungswissen in Branchenwertschöpfungsketten, Hanser, München, 2014.","din1505-2-1":"Gausemeier, J. ; Trächtler, A. ; Schäfer, W. ; Borcherding, Holger: Semantische Technologien im Entwurf mechatronischer Systeme: Effektiver Austausch von Lösungswissen in Branchenwertschöpfungsketten. München : Hanser, 2014","chicago-de":"Gausemeier, J., A. Trächtler, W. Schäfer und Holger Borcherding. 2014. Semantische Technologien im Entwurf mechatronischer Systeme: Effektiver Austausch von Lösungswissen in Branchenwertschöpfungsketten. München: Hanser."},"title":"Semantische Technologien im Entwurf mechatronischer Systeme: Effektiver Austausch von Lösungswissen in Branchenwertschöpfungsketten","page":"309","status":"public","publisher":"Hanser","department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"author":[{"full_name":"Gausemeier, J.","first_name":"J.","last_name":"Gausemeier"},{"full_name":"Trächtler, A.","last_name":"Trächtler","first_name":"A."},{"first_name":"W.","last_name":"Schäfer","full_name":"Schäfer, W."},{"first_name":"Holger","last_name":"Borcherding","id":"1693","full_name":"Borcherding, Holger"}],"year":2014,"date_updated":"2023-03-15T13:49:51Z","user_id":"74004","date_created":"2020-12-14T10:03:19Z","type":"book","publication_identifier":{"isbn":["978-3446436305"]},"language":[{"iso":"ger"}],"place":"München","_id":"4273"},{"_id":"4274","place":"Haar","language":[{"iso":"ger"}],"publication_identifier":{"isbn":["978-3-645-50133-0"]},"publication":"Smarter world : solutions for a smarter world ","type":"conference","date_created":"2020-12-14T10:16:22Z","user_id":"74004","date_updated":"2023-03-15T13:49:51Z","author":[{"first_name":"Holger","last_name":"Borcherding","full_name":"Borcherding, Holger","id":"1693"},{"first_name":"Johann","last_name":"Austermann","full_name":"Austermann, Johann","id":"42114"}],"year":2014,"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"conference":{"location":"München","name":"2. Elektrische Antriebe Symposium","end_date":"2014-10-09","start_date":"2014-10-08"},"publisher":"WEKA Fachmedien GmbH","status":"public","title":"Energieeffiziente Intralogistik – Optimale Nutzung generatorischer Energie durch neuartiges modulares Netzrückspeisekonzept","citation":{"chicago-de":"Borcherding, Holger und Johann Austermann. 2014. Energieeffiziente Intralogistik – Optimale Nutzung generatorischer Energie durch neuartiges modulares Netzrückspeisekonzept. In: Smarter world : solutions for a smarter world . Haar: WEKA Fachmedien GmbH.","din1505-2-1":"Borcherding, Holger ; Austermann, Johann: Energieeffiziente Intralogistik – Optimale Nutzung generatorischer Energie durch neuartiges modulares Netzrückspeisekonzept. In: Smarter world : solutions for a smarter world . Haar : WEKA Fachmedien GmbH, 2014","short":"H. Borcherding, J. Austermann, in: Smarter world : solutions for a smarter world , WEKA Fachmedien GmbH, Haar, 2014.","chicago":"Borcherding, Holger, and Johann Austermann. “Energieeffiziente Intralogistik – Optimale Nutzung generatorischer Energie durch neuartiges modulares Netzrückspeisekonzept.” In Smarter world : solutions for a smarter world . Haar: WEKA Fachmedien GmbH, 2014.","apa":"Borcherding, H., & Austermann, J. (2014). Energieeffiziente Intralogistik – Optimale Nutzung generatorischer Energie durch neuartiges modulares Netzrückspeisekonzept. In Smarter world : solutions for a smarter world . Haar: WEKA Fachmedien GmbH.","ufg":"Borcherding, Holger/Austermann, Johann (2014): Energieeffiziente Intralogistik – Optimale Nutzung generatorischer Energie durch neuartiges modulares Netzrückspeisekonzept, in: Smarter world : solutions for a smarter world , Haar.","bjps":"Borcherding H and Austermann J (2014) Energieeffiziente Intralogistik – Optimale Nutzung generatorischer Energie durch neuartiges modulares Netzrückspeisekonzept. Smarter world : solutions for a smarter world . Haar: WEKA Fachmedien GmbH.","havard":"H. Borcherding, J. Austermann, Energieeffiziente Intralogistik – Optimale Nutzung generatorischer Energie durch neuartiges modulares Netzrückspeisekonzept, in: Smarter world : solutions for a smarter world , WEKA Fachmedien GmbH, Haar, 2014.","mla":"Borcherding, Holger, and Johann Austermann. “Energieeffiziente Intralogistik – Optimale Nutzung generatorischer Energie durch neuartiges modulares Netzrückspeisekonzept.” Smarter world : solutions for a smarter world , WEKA Fachmedien GmbH, 2014.","van":"Borcherding H, Austermann J. Energieeffiziente Intralogistik – Optimale Nutzung generatorischer Energie durch neuartiges modulares Netzrückspeisekonzept. In: Smarter world : solutions for a smarter world . Haar: WEKA Fachmedien GmbH; 2014.","ieee":"H. Borcherding and J. Austermann, “Energieeffiziente Intralogistik – Optimale Nutzung generatorischer Energie durch neuartiges modulares Netzrückspeisekonzept,” in Smarter world : solutions for a smarter world , München, 2014.","ama":"Borcherding H, Austermann J. Energieeffiziente Intralogistik – Optimale Nutzung generatorischer Energie durch neuartiges modulares Netzrückspeisekonzept. In: Smarter world : solutions for a smarter world . Haar: WEKA Fachmedien GmbH; 2014."}},{"citation":{"apa":"Mambetow, A., & Borcherding, H. (2014). Erstellung einer IEC 62578 konformen Netznachbildung und Erfahrung in der Auslegung und Anwendung. Technische Hochschule Ostwestfalen-Lippe. https://doi.org/10.15488/5457","chicago":"Mambetow, Artur, and Holger Borcherding. Erstellung Einer IEC 62578 Konformen Netznachbildung Und Erfahrung in Der Auslegung Und Anwendung. Technische Hochschule Ostwestfalen-Lippe, 2014. https://doi.org/10.15488/5457.","van":"Mambetow A, Borcherding H. Erstellung einer IEC 62578 konformen Netznachbildung und Erfahrung in der Auslegung und Anwendung. Technische Hochschule Ostwestfalen-Lippe; 2014.","havard":"A. Mambetow, H. Borcherding, Erstellung einer IEC 62578 konformen Netznachbildung und Erfahrung in der Auslegung und Anwendung, Technische Hochschule Ostwestfalen-Lippe, 2014.","mla":"Mambetow, Artur, and Holger Borcherding. Erstellung Einer IEC 62578 Konformen Netznachbildung Und Erfahrung in Der Auslegung Und Anwendung. Technische Hochschule Ostwestfalen-Lippe, 2014, doi:10.15488/5457.","bjps":"Mambetow A and Borcherding H (2014) Erstellung Einer IEC 62578 Konformen Netznachbildung Und Erfahrung in Der Auslegung Und Anwendung. Technische Hochschule Ostwestfalen-Lippe.","ufg":"Mambetow, Artur/Borcherding, Holger (2014): Erstellung einer IEC 62578 konformen Netznachbildung und Erfahrung in der Auslegung und Anwendung.","short":"A. Mambetow, H. Borcherding, Erstellung Einer IEC 62578 Konformen Netznachbildung Und Erfahrung in Der Auslegung Und Anwendung, Technische Hochschule Ostwestfalen-Lippe, 2014.","din1505-2-1":"Mambetow, Artur ; Borcherding, Holger: Erstellung einer IEC 62578 konformen Netznachbildung und Erfahrung in der Auslegung und Anwendung : Technische Hochschule Ostwestfalen-Lippe, 2014","chicago-de":"Mambetow, Artur und Holger Borcherding. 2014. Erstellung einer IEC 62578 konformen Netznachbildung und Erfahrung in der Auslegung und Anwendung. Technische Hochschule Ostwestfalen-Lippe. doi:10.15488/5457, .","ieee":"A. Mambetow and H. Borcherding, Erstellung einer IEC 62578 konformen Netznachbildung und Erfahrung in der Auslegung und Anwendung. Technische Hochschule Ostwestfalen-Lippe, 2014.","ama":"Mambetow A, Borcherding H. Erstellung Einer IEC 62578 Konformen Netznachbildung Und Erfahrung in Der Auslegung Und Anwendung. Technische Hochschule Ostwestfalen-Lippe; 2014. doi:10.15488/5457"},"title":"Erstellung einer IEC 62578 konformen Netznachbildung und Erfahrung in der Auslegung und Anwendung","publisher":" Technische Hochschule Ostwestfalen-Lippe","status":"public","author":[{"id":"51936","first_name":"Artur","full_name":"Mambetow, Artur","last_name":"Mambetow"},{"last_name":"Borcherding","id":"1693","full_name":"Borcherding, Holger","first_name":"Holger"}],"year":2014,"department":[{"_id":"DEP6020"}],"user_id":"74004","date_updated":"2023-03-15T13:49:51Z","date_created":"2020-12-14T13:31:54Z","type":"research_data","_id":"4290","doi":"10.15488/5457"},{"user_id":"15514","intvolume":" 8708","type":"conference","place":"Cham","doi":"10.1007/978-3-319-10975-6_9","_id":"4371","publication_status":"published","series_title":"Lecture Notes in Computer Science","publisher":"Springer","department":[{"_id":"DEP5023"}],"conference":{"location":"Fribourg, Switzerland","name":"5 International Cross-Domain Conference, CD-ARES 2014 and 4th International Workshop on Security and Cognitive Informatics for Homeland Defense, SeCIHD 2014","start_date":"2014-09-08","end_date":"2014-09-12"},"abstract":[{"text":"A major challenge in modern data-centric medicine is the increasing amount of time-dependent data, which requires efficient user-friendly solutions for dealing with such data. To create an effective and efficient knowledge discovery process, it is important to support common data manipulation tasks by creating quick, responsive and intuitive interaction methods. In this paper we describe some methods for interactive longitudinal data visualization with focus on the usage of mobile multi-touch devices as interaction medium, based on our design and development experiences. We argue that when it comes to longitudinal data this device category offers remarkable additional interaction benefits compared to standard point-and-click desktop computer devices. An important advantage of multi-touch devices arises when interacting with particularly large longitudinal data sets: Complex, coupled interactions such as zooming into a region and scrolling around almost simultaneously is more easily achieved with the possibilities of a multi-touch device than compared to a regular mouse-based interaction device.","lang":"eng"}],"date_updated":"2023-03-15T13:49:52Z","editor":[{"full_name":"Teufel, Stephanie ","last_name":"Teufel","first_name":"Stephanie "},{"full_name":"Min, Tjoa A ","first_name":"Tjoa A ","last_name":"Min"},{"last_name":"You","full_name":"You, Ilsun ","first_name":"Ilsun "},{"last_name":"Weippl","first_name":"Edgar ","full_name":"Weippl, Edgar "}],"date_created":"2021-01-14T10:13:18Z","publication":" Availability, Reliability, and Security in Information Systems ","publication_identifier":{"isbn":["978-3-319-10974-9"],"eisbn":["978-3-319-10975-6"]},"language":[{"iso":"eng"}],"keyword":["Data Visualization","Longitudinal Data","Time Series","Multi-Touch","Mobile Computing"],"oa":"1","volume":8708,"citation":{"ama":"Holzinger A, Schwarz M, Ofner B, et al. Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers. In: Teufel S, Min TA, You I, Weippl E, eds. Availability, Reliability, and Security in Information Systems . Vol 8708. Lecture Notes in Computer Science. Cham: Springer; 2014:124-137. doi:10.1007/978-3-319-10975-6_9","ieee":"A. Holzinger et al., “Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers,” in Availability, Reliability, and Security in Information Systems , Fribourg, Switzerland, 2014, vol. 8708, pp. 124–137.","mla":"Holzinger, Andreas, et al. “Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers.” Availability, Reliability, and Security in Information Systems , edited by Stephanie Teufel et al., vol. 8708, Springer, 2014, pp. 124–37, doi:10.1007/978-3-319-10975-6_9.","bjps":"Holzinger A et al. (2014) Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers. In Teufel S et al. (eds), Availability, Reliability, and Security in Information Systems , vol. 8708. Cham: Springer, pp. 124–137.","havard":"A. Holzinger, M. Schwarz, B. Ofner, F. Jeanquartier, A. Calero-Valdez, C. Röcker, M. Ziefle, Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers, in: S. Teufel, T.A. Min, I. You, E. Weippl (Eds.), Availability, Reliability, and Security in Information Systems , Springer, Cham, 2014: pp. 124–137.","ufg":"Holzinger, Andreas et. al. (2014): Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers, in: Stephanie Teufel et. al. (Hgg.): Availability, Reliability, and Security in Information Systems (=Lecture Notes in Computer Science 8708), Cham, S. 124–137.","van":"Holzinger A, Schwarz M, Ofner B, Jeanquartier F, Calero-Valdez A, Röcker C, et al. Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers. In: Teufel S, Min TA, You I, Weippl E, editors. Availability, Reliability, and Security in Information Systems . Cham: Springer; 2014. p. 124–37. (Lecture Notes in Computer Science; vol. 8708).","chicago":"Holzinger, Andreas, Michael Schwarz, Bernhard Ofner, Fleur Jeanquartier, Andre Calero-Valdez, Carsten Röcker, and Martina Ziefle. “Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers.” In Availability, Reliability, and Security in Information Systems , edited by Stephanie Teufel, Tjoa A Min, Ilsun You, and Edgar Weippl, 8708:124–37. Lecture Notes in Computer Science. Cham: Springer, 2014. https://doi.org/10.1007/978-3-319-10975-6_9.","apa":"Holzinger, A., Schwarz, M., Ofner, B., Jeanquartier, F., Calero-Valdez, A., Röcker, C., & Ziefle, M. (2014). Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers. In S. Teufel, T. A. Min, I. You, & E. Weippl (Eds.), Availability, Reliability, and Security in Information Systems (Vol. 8708, pp. 124–137). Cham: Springer. https://doi.org/10.1007/978-3-319-10975-6_9","din1505-2-1":"Holzinger, Andreas ; Schwarz, Michael ; Ofner, Bernhard ; Jeanquartier, Fleur ; Calero-Valdez, Andre ; Röcker, Carsten ; Ziefle, Martina: Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers. In: Teufel, S. ; Min, T. A. ; You, I. ; Weippl, E. (Hrsg.): Availability, Reliability, and Security in Information Systems , Lecture Notes in Computer Science. Bd. 8708. Cham : Springer, 2014, S. 124–137","chicago-de":"Holzinger, Andreas, Michael Schwarz, Bernhard Ofner, Fleur Jeanquartier, Andre Calero-Valdez, Carsten Röcker und Martina Ziefle. 2014. Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers. In: Availability, Reliability, and Security in Information Systems , hg. von Stephanie Teufel, Tjoa A Min, Ilsun You, und Edgar Weippl, 8708:124–137. Lecture Notes in Computer Science. Cham: Springer. doi:10.1007/978-3-319-10975-6_9, .","short":"A. Holzinger, M. Schwarz, B. Ofner, F. Jeanquartier, A. Calero-Valdez, C. Röcker, M. Ziefle, in: S. Teufel, T.A. Min, I. You, E. Weippl (Eds.), Availability, Reliability, and Security in Information Systems , Springer, Cham, 2014, pp. 124–137."},"title":"Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers","page":"124 - 137","status":"public","author":[{"last_name":"Holzinger","first_name":"Andreas","full_name":"Holzinger, Andreas"},{"first_name":"Michael","full_name":"Schwarz, Michael","last_name":"Schwarz"},{"last_name":"Ofner","first_name":"Bernhard","full_name":"Ofner, Bernhard"},{"full_name":"Jeanquartier, Fleur","first_name":"Fleur","last_name":"Jeanquartier"},{"last_name":"Calero-Valdez","full_name":"Calero-Valdez, Andre","first_name":"Andre"},{"first_name":"Carsten","id":"61525","last_name":"Röcker","full_name":"Röcker, Carsten"},{"full_name":"Ziefle, Martina","last_name":"Ziefle","first_name":"Martina"}],"main_file_link":[{"open_access":"1"}],"year":2014},{"editor":[{"last_name":"Teufel","first_name":"Stephanie","full_name":"Teufel, Stephanie"},{"full_name":"Min, Tjoa A.","first_name":"Tjoa A.","last_name":"Min"},{"full_name":"You, Ilsun","last_name":"You","first_name":"Ilsun"},{"full_name":"Weippl, Edgar","first_name":"Edgar","last_name":"Weippl"}],"date_updated":"2023-03-15T13:49:52Z","date_created":"2021-01-14T10:13:20Z","publication_identifier":{"isbn":["978-3-319-10974-9"],"eisbn":["978-3-319-10975-6"]},"publication":"Availability, Reliability, and Security in Information Systems","language":[{"iso":"eng"}],"keyword":["Mobile computing","real-world","user experience","hospital computing","medical informatics"],"oa":"1","citation":{"short":"A. Holzinger, B. Sommerauer, P. Spitzer, S. Juric, B. Zalik, M. Debevc, C. Lidynia, A. Calero-Valdez, C. Röcker, M. Ziefle, in: S. Teufel, T.A. Min, I. You, E. Weippl (Eds.), Availability, Reliability, and Security in Information Systems, Springer, Cham, 2014, pp. 110–123.","din1505-2-1":"Holzinger, Andreas ; Sommerauer, Bettina ; Spitzer, Peter ; Juric, Simon ; Zalik, Borut ; Debevc, Matjaz ; Lidynia, Chantal ; Calero-Valdez, Andre ; u. a.: Mobile Computing is not Always Advantageous: Lessons Learned from a Real-World Case Study in a Hospital. In: Teufel, S. ; Min, T. A. ; You, I. ; Weippl, E. (Hrsg.): Availability, Reliability, and Security in Information Systems, Lecture Notes in Computer Science. Bd. 8708. Cham : Springer, 2014, S. 110–123","chicago-de":"Holzinger, Andreas, Bettina Sommerauer, Peter Spitzer, Simon Juric, Borut Zalik, Matjaz Debevc, Chantal Lidynia, Andre Calero-Valdez, Carsten Röcker und Martina Ziefle. 2014. Mobile Computing is not Always Advantageous: Lessons Learned from a Real-World Case Study in a Hospital. In: Availability, Reliability, and Security in Information Systems, hg. von Stephanie Teufel, Tjoa A. Min, Ilsun You, und Edgar Weippl, 8708:110–123. Lecture Notes in Computer Science. Cham: Springer. doi:10.1007/978-3-319-10975-6_8, .","van":"Holzinger A, Sommerauer B, Spitzer P, Juric S, Zalik B, Debevc M, et al. Mobile Computing is not Always Advantageous: Lessons Learned from a Real-World Case Study in a Hospital. In: Teufel S, Min TA, You I, Weippl E, editors. Availability, Reliability, and Security in Information Systems. Cham: Springer; 2014. p. 110–23. (Lecture Notes in Computer Science; vol. 8708).","ufg":"Holzinger, Andreas et. al. (2014): Mobile Computing is not Always Advantageous: Lessons Learned from a Real-World Case Study in a Hospital, in: Stephanie Teufel et. al. (Hgg.): Availability, Reliability, and Security in Information Systems (=Lecture Notes in Computer Science 8708), Cham, S. 110–123.","mla":"Holzinger, Andreas, et al. “Mobile Computing Is Not Always Advantageous: Lessons Learned from a Real-World Case Study in a Hospital.” Availability, Reliability, and Security in Information Systems, edited by Stephanie Teufel et al., vol. 8708, Springer, 2014, pp. 110–23, doi:10.1007/978-3-319-10975-6_8.","havard":"A. Holzinger, B. Sommerauer, P. Spitzer, S. Juric, B. Zalik, M. Debevc, C. Lidynia, A. Calero-Valdez, C. Röcker, M. Ziefle, Mobile Computing is not Always Advantageous: Lessons Learned from a Real-World Case Study in a Hospital, in: S. Teufel, T.A. Min, I. You, E. Weippl (Eds.), Availability, Reliability, and Security in Information Systems, Springer, Cham, 2014: pp. 110–123.","bjps":"Holzinger A et al. (2014) Mobile Computing Is Not Always Advantageous: Lessons Learned from a Real-World Case Study in a Hospital. In Teufel S et al. (eds), Availability, Reliability, and Security in Information Systems, vol. 8708. Cham: Springer, pp. 110–123.","apa":"Holzinger, A., Sommerauer, B., Spitzer, P., Juric, S., Zalik, B., Debevc, M., … Ziefle, M. (2014). Mobile Computing is not Always Advantageous: Lessons Learned from a Real-World Case Study in a Hospital. In S. Teufel, T. A. Min, I. You, & E. Weippl (Eds.), Availability, Reliability, and Security in Information Systems (Vol. 8708, pp. 110–123). Cham: Springer. https://doi.org/10.1007/978-3-319-10975-6_8","chicago":"Holzinger, Andreas, Bettina Sommerauer, Peter Spitzer, Simon Juric, Borut Zalik, Matjaz Debevc, Chantal Lidynia, Andre Calero-Valdez, Carsten Röcker, and Martina Ziefle. “Mobile Computing Is Not Always Advantageous: Lessons Learned from a Real-World Case Study in a Hospital.” In Availability, Reliability, and Security in Information Systems, edited by Stephanie Teufel, Tjoa A. Min, Ilsun You, and Edgar Weippl, 8708:110–23. Lecture Notes in Computer Science. Cham: Springer, 2014. https://doi.org/10.1007/978-3-319-10975-6_8.","ama":"Holzinger A, Sommerauer B, Spitzer P, et al. Mobile Computing is not Always Advantageous: Lessons Learned from a Real-World Case Study in a Hospital. In: Teufel S, Min TA, You I, Weippl E, eds. Availability, Reliability, and Security in Information Systems. Vol 8708. Lecture Notes in Computer Science. Cham: Springer; 2014:110-123. doi:10.1007/978-3-319-10975-6_8","ieee":"A. Holzinger et al., “Mobile Computing is not Always Advantageous: Lessons Learned from a Real-World Case Study in a Hospital,” in Availability, Reliability, and Security in Information Systems, Fribourg, Switzerland, 2014, vol. 8708, pp. 110–123."},"volume":8708,"title":"Mobile Computing is not Always Advantageous: Lessons Learned from a Real-World Case Study in a Hospital","page":"110 - 123","status":"public","main_file_link":[{"open_access":"1"}],"year":2014,"author":[{"first_name":"Andreas","full_name":"Holzinger, Andreas","last_name":"Holzinger"},{"last_name":"Sommerauer","first_name":"Bettina","full_name":"Sommerauer, Bettina"},{"first_name":"Peter","last_name":"Spitzer","full_name":"Spitzer, Peter"},{"full_name":"Juric, Simon","first_name":"Simon","last_name":"Juric"},{"full_name":"Zalik, Borut","first_name":"Borut","last_name":"Zalik"},{"first_name":"Matjaz","full_name":"Debevc, Matjaz","last_name":"Debevc"},{"full_name":"Lidynia, Chantal","first_name":"Chantal","last_name":"Lidynia"},{"full_name":"Calero-Valdez, Andre","first_name":"Andre","last_name":"Calero-Valdez"},{"first_name":"Carsten","id":"61525","full_name":"Röcker, Carsten","last_name":"Röcker"},{"first_name":"Martina","last_name":"Ziefle","full_name":"Ziefle, Martina"}],"intvolume":" 8708","user_id":"15514","type":"conference","doi":"10.1007/978-3-319-10975-6_8","_id":"4372","place":"Cham","publication_status":"published","series_title":"Lecture Notes in Computer Science","publisher":"Springer","abstract":[{"lang":"eng","text":"The use of mobile computing is expanding dramatically in recent years and trends indicate that “the future is mobile”. Nowadays, mobile computing plays an increasingly important role in the biomedical domain, and particularly in hospitals. The benefits of using mobile devices in hospitals are no longer disputed and many applications for medical care are already available. Many studies have proven that mobile technologies can bring various benefits for enhancing information management in the hospital. But is mobility a solution for every problem?\r\n\r\nIn this paper, we will demonstrate that mobility is not always an advantage. On the basis of a field study at the pediatric surgery of a large University Hospital, we have learned within a two-year long mobile computing project, that mobile devices have indeed many disadvantages, particularly in stressful and hectic situations and we conclude that mobile computing is not always advantageous."}],"conference":{"location":"Fribourg, Switzerland","name":"5 International Cross-Domain Conference, CD-ARES 2014 and 4th International Workshop on Security and Cognitive Informatics for Homeland Defense, SeCIHD 2014","end_date":"2014-09-12","start_date":"2014-09-08"},"department":[{"_id":"DEP5023"}]},{"_id":"4373","doi":"10.4108/icst.pervasivehealth.2014.255142#d73284787e1","place":"Brussels, Belgium ","type":"conference","user_id":"15514","abstract":[{"text":"Today, usability measures for the evaluation of systems and interfaces are mostly assessed in an isolated way. This paper addresses the question whether an integrative multi-dimensional feature evaluation can lead to different and more holistic results. We combined traditional measures (e.g., time to task completion) with advanced measures, like eye tracking, biosignal data logging and assessment of user emotions. For the evaluation of emotions, we used verbal methods (PAD Semantic Scale and a questionnaire) and a nonverbal method with EmoCards. The overall goal was to document and analyze the interaction as completely as possible (including effectiveness, efficiency and user satisfaction), focusing especially on objective measurements. Furthermore, the recording and assessment of emotions, which are part of the user experience, should give insights into user satisfaction.","lang":"eng"}],"conference":{"name":"8th International Conference on Pervasive Computing Technologies for Healthcare","location":"Oldenburg","end_date":"2014-05-23","start_date":"2014-05-20"},"department":[{"_id":"DEP5023"}],"publisher":" ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering)","publication_status":"published","oa":"1","keyword":["Usability Measures","User Experience","Eye Tracking","Biosignal Data Logging","Emotion Evaluation","Risk Analysis","Medical Devices","Integrated Usability Evaluation"],"language":[{"iso":"eng"}],"publication_identifier":{"unknown":["978-1-63190-011-2"]},"publication":"Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare ","date_created":"2021-01-14T10:13:21Z","corporate_editor":["Association for Computing Machinery-Digital Library","ACM Special Interest Group on Computer-Human Interaction"],"editor":[{"last_name":"Hein","first_name":"Andreas","full_name":"Hein, Andreas"}],"related_material":{"link":[{"url":"https://doi.org/10.4108/icst.pervasivehealth.2014.255142","relation":"original"}]},"date_updated":"2023-03-15T13:49:52Z","year":2014,"author":[{"full_name":"Ermes, Verena","last_name":"Ermes","first_name":"Verena"},{"first_name":"Armin","full_name":"Janß, Armin","last_name":"Janß"},{"full_name":"Radermacher, Klaus","last_name":"Radermacher","first_name":"Klaus"},{"id":"61525","first_name":"Carsten","full_name":"Röcker, Carsten","last_name":"Röcker"}],"main_file_link":[{"open_access":"1"}],"status":"public","page":"227 - 230","title":"Analyzing the Benefits of Integrative Multi-Dimensional Assessments of Usability Features in Interaction-Centered User Studies","extern":"1","citation":{"ama":"Ermes V, Janß A, Radermacher K, Röcker C. Analyzing the Benefits of Integrative Multi-Dimensional Assessments of Usability Features in Interaction-Centered User Studies. In: Hein A, Association for Computing Machinery-Digital Library, eds. Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare . Brussels, Belgium : ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering); 2014:227-230. doi:10.4108/icst.pervasivehealth.2014.255142#d73284787e1","ieee":"V. Ermes, A. Janß, K. Radermacher, and C. Röcker, “Analyzing the Benefits of Integrative Multi-Dimensional Assessments of Usability Features in Interaction-Centered User Studies,” in Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare , Oldenburg, 2014, pp. 227–230.","din1505-2-1":"Ermes, Verena ; Janß, Armin ; Radermacher, Klaus ; Röcker, Carsten: Analyzing the Benefits of Integrative Multi-Dimensional Assessments of Usability Features in Interaction-Centered User Studies. In: Hein, A. ; Association for Computing Machinery-Digital Library (Hrsg.): Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare . Brussels, Belgium : ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering), 2014, S. 227–230","chicago-de":"Ermes, Verena, Armin Janß, Klaus Radermacher und Carsten Röcker. 2014. Analyzing the Benefits of Integrative Multi-Dimensional Assessments of Usability Features in Interaction-Centered User Studies. In: Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare , hg. von Andreas Hein und Association for Computing Machinery-Digital Library, 227–230. Brussels, Belgium : ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering). doi:10.4108/icst.pervasivehealth.2014.255142#d73284787e1, .","short":"V. Ermes, A. Janß, K. Radermacher, C. Röcker, in: A. Hein, Association for Computing Machinery-Digital Library (Eds.), Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare , ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering), Brussels, Belgium , 2014, pp. 227–230.","havard":"V. Ermes, A. Janß, K. Radermacher, C. Röcker, Analyzing the Benefits of Integrative Multi-Dimensional Assessments of Usability Features in Interaction-Centered User Studies, in: A. Hein, Association for Computing Machinery-Digital Library (Eds.), Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare , ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering), Brussels, Belgium , 2014: pp. 227–230.","mla":"Ermes, Verena, et al. “Analyzing the Benefits of Integrative Multi-Dimensional Assessments of Usability Features in Interaction-Centered User Studies.” Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare , edited by Andreas Hein and Association for Computing Machinery-Digital Library, ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering), 2014, pp. 227–30, doi:10.4108/icst.pervasivehealth.2014.255142#d73284787e1.","bjps":"Ermes V et al. (2014) Analyzing the Benefits of Integrative Multi-Dimensional Assessments of Usability Features in Interaction-Centered User Studies. In Hein A and Association for Computing Machinery-Digital Library (eds), Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare . Brussels, Belgium : ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering), pp. 227–230.","ufg":"Ermes, Verena et. al. (2014): Analyzing the Benefits of Integrative Multi-Dimensional Assessments of Usability Features in Interaction-Centered User Studies, in: Andreas Hein/Association for Computing Machinery-Digital Library (Hgg.): Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare , Brussels, Belgium , S. 227–230.","van":"Ermes V, Janß A, Radermacher K, Röcker C. Analyzing the Benefits of Integrative Multi-Dimensional Assessments of Usability Features in Interaction-Centered User Studies. In: Hein A, Association for Computing Machinery-Digital Library, editors. Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare . Brussels, Belgium : ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering); 2014. p. 227–30.","chicago":"Ermes, Verena, Armin Janß, Klaus Radermacher, and Carsten Röcker. “Analyzing the Benefits of Integrative Multi-Dimensional Assessments of Usability Features in Interaction-Centered User Studies.” In Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare , edited by Andreas Hein and Association for Computing Machinery-Digital Library, 227–30. Brussels, Belgium : ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering), 2014. https://doi.org/10.4108/icst.pervasivehealth.2014.255142#d73284787e1.","apa":"Ermes, V., Janß, A., Radermacher, K., & Röcker, C. (2014). Analyzing the Benefits of Integrative Multi-Dimensional Assessments of Usability Features in Interaction-Centered User Studies. In A. Hein & Association for Computing Machinery-Digital Library (Eds.), Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare (pp. 227–230). Brussels, Belgium : ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering). https://doi.org/10.4108/icst.pervasivehealth.2014.255142#d73284787e1"}},{"author":[{"first_name":"Norimichi ","full_name":"Ukita, Norimichi ","last_name":"Ukita"},{"full_name":"Eimon, Koki","first_name":"Koki","last_name":"Eimon"},{"first_name":"Carsten","full_name":"Röcker, Carsten","last_name":"Röcker","id":"61525"}],"year":2014,"main_file_link":[{"open_access":"1"}],"page":"223-226","status":"public","extern":"1","title":"Mining Crucial Features for Automatic Rehabilitation Coaching Systems","citation":{"ama":"Ukita N, Eimon K, Röcker C. Mining Crucial Features for Automatic Rehabilitation Coaching Systems. In: Hein A, ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering) , eds. Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare . Brussels, Belgium : ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering); 2014:223-226. doi:10.4108/icst.pervasivehealth.2014.255133","ieee":"N. Ukita, K. Eimon, and C. Röcker, “Mining Crucial Features for Automatic Rehabilitation Coaching Systems,” in Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare , Oldenburg, 2014, pp. 223–226.","din1505-2-1":"Ukita, Norimichi ; Eimon, Koki ; Röcker, Carsten: Mining Crucial Features for Automatic Rehabilitation Coaching Systems. In: Hein, A. ; ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering) (Hrsg.): Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare . Brussels, Belgium : ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering), 2014, S. 223–226","chicago-de":"Ukita, Norimichi , Koki Eimon und Carsten Röcker. 2014. Mining Crucial Features for Automatic Rehabilitation Coaching Systems. In: Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare , hg. von Andreas Hein und ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering) , 223–226. Brussels, Belgium : ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering). doi:10.4108/icst.pervasivehealth.2014.255133, .","short":"N. Ukita, K. Eimon, C. Röcker, in: A. Hein, ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering) (Eds.), Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare , ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering), Brussels, Belgium , 2014, pp. 223–226.","bjps":"Ukita N, Eimon K and Röcker C (2014) Mining Crucial Features for Automatic Rehabilitation Coaching Systems. In Hein A and ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering) (eds), Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare . Brussels, Belgium : ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering), pp. 223–226.","mla":"Ukita, Norimichi, et al. “Mining Crucial Features for Automatic Rehabilitation Coaching Systems.” Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare , edited by Andreas Hein and ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering) , ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering), 2014, pp. 223–26, doi:10.4108/icst.pervasivehealth.2014.255133.","havard":"N. Ukita, K. Eimon, C. Röcker, Mining Crucial Features for Automatic Rehabilitation Coaching Systems, in: A. Hein, ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering) (Eds.), Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare , ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering), Brussels, Belgium , 2014: pp. 223–226.","ufg":"Ukita, Norimichi et. al. (2014): Mining Crucial Features for Automatic Rehabilitation Coaching Systems, in: Andreas Hein/ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering) (Hgg.): Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare , Brussels, Belgium , S. 223–226.","van":"Ukita N, Eimon K, Röcker C. Mining Crucial Features for Automatic Rehabilitation Coaching Systems. In: Hein A, ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering) , editors. Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare . Brussels, Belgium : ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering); 2014. p. 223–6.","chicago":"Ukita, Norimichi , Koki Eimon, and Carsten Röcker. “Mining Crucial Features for Automatic Rehabilitation Coaching Systems.” In Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare , edited by Andreas Hein and ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering) , 223–26. Brussels, Belgium : ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering), 2014. https://doi.org/10.4108/icst.pervasivehealth.2014.255133.","apa":"Ukita, N., Eimon, K., & Röcker, C. (2014). Mining Crucial Features for Automatic Rehabilitation Coaching Systems. In A. Hein & ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering) (Eds.), Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare (pp. 223–226). Brussels, Belgium : ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering). https://doi.org/10.4108/icst.pervasivehealth.2014.255133"},"oa":"1","language":[{"iso":"eng"}],"keyword":["motion coach","rehabilitation","pervasive health","ambient assisted living"],"date_created":"2021-01-14T10:13:23Z","publication_identifier":{"isbn":["978-1-63190-011-2"]},"publication":"Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare ","editor":[{"last_name":"Hein","first_name":"Andreas","full_name":"Hein, Andreas"}],"corporate_editor":["ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering) "],"date_updated":"2023-03-15T13:49:52Z","abstract":[{"lang":"eng","text":"Our goal is to develop a system for coaching human motions (e.g. rehabilitation). Such a coaching system should have several function such as motion measurement, evaluation, and feedback. Among all, this paper focuses on how to modify a user’s motion so that it gets closer to the good template of a target motion. To this end, it is important to efficiently advise the user to emulate the crucial features that define the good template. The proposed method automatically mines the crucial features of any kind of motions from a set of all motion features. The crucial features are mined based on feature sparsification through binary classification between the samples of good and other motions."}],"conference":{"location":"Oldenburg","name":"8th International Conference on Pervasive Computing Technologies for Healthcare","end_date":"2014-05-23","start_date":"2014-05-20"},"department":[{"_id":"DEP5023"}],"publisher":" ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering)","publication_status":"published","doi":"10.4108/icst.pervasivehealth.2014.255133","_id":"4374","place":"Brussels, Belgium ","type":"conference","user_id":"15514"},{"series_title":"Human–Computer Interaction Series","publication_status":"published","department":[{"_id":"DEP5023"}],"abstract":[{"text":"This chapter starts with an overview of the technical innovations and societal transformation processes we have seen in the last decades and as well as the consequences those changes have for the design of pervasive healthcare systems. Based on this theoretical foundation, emerging design requirements and research challenges are outlined, which are crucial to be addressed when developing future health technologies.","lang":"eng"}],"publisher":"Springer","type":"book_chapter","user_id":"15514","place":"London","doi":"10.1007/978-1-4471-6413-5_1","_id":"4375","extern":"1","title":"From Computer Innovation to Human Integration: Current Trends and Challenges for Pervasive Health Technologies","citation":{"short":"C. Röcker, M. Ziefle, A. Holzinger, in: A. Holzinger, M. Ziefle, C. Röcker (Eds.), Pervasive Health, Springer, London, 2014, pp. 1–17.","chicago-de":"Röcker, Carsten, Martina Ziefle und Andreas Holzinger. 2014. From Computer Innovation to Human Integration: Current Trends and Challenges for Pervasive Health Technologies. In: Pervasive Health, hg. von Andreas Holzinger, Martina Ziefle, und Carsten Röcker, 1–17. Human–Computer Interaction Series. London: Springer. doi:10.1007/978-1-4471-6413-5_1, .","din1505-2-1":"Röcker, Carsten ; Ziefle, Martina ; Holzinger, Andreas: From Computer Innovation to Human Integration: Current Trends and Challenges for Pervasive Health Technologies. In: Holzinger, A. ; Ziefle, M. ; Röcker, C. (Hrsg.): Pervasive Health, Human–Computer Interaction Series. London : Springer, 2014, S. 1–17","van":"Röcker C, Ziefle M, Holzinger A. From Computer Innovation to Human Integration: Current Trends and Challenges for Pervasive Health Technologies. In: Holzinger A, Ziefle M, Röcker C, editors. Pervasive Health. London: Springer; 2014. p. 1–17. (Human–Computer Interaction Series).","ama":"Röcker C, Ziefle M, Holzinger A. From Computer Innovation to Human Integration: Current Trends and Challenges for Pervasive Health Technologies. In: Holzinger A, Ziefle M, Röcker C, eds. Pervasive Health. Human–Computer Interaction Series. London: Springer; 2014:1-17. doi:10.1007/978-1-4471-6413-5_1","ufg":"Röcker, Carsten et. al. (2014): From Computer Innovation to Human Integration: Current Trends and Challenges for Pervasive Health Technologies, in: Andreas Holzinger et. al. (Hgg.): Pervasive Health (=Human–Computer Interaction Series), London, S. 1–17.","bjps":"Röcker C, Ziefle M and Holzinger A (2014) From Computer Innovation to Human Integration: Current Trends and Challenges for Pervasive Health Technologies. In Holzinger A, Ziefle M and Röcker C (eds), Pervasive Health. London: Springer, pp. 1–17.","mla":"Röcker, Carsten, et al. “From Computer Innovation to Human Integration: Current Trends and Challenges for Pervasive Health Technologies.” Pervasive Health, edited by Andreas Holzinger et al., Springer, 2014, pp. 1–17, doi:10.1007/978-1-4471-6413-5_1.","havard":"C. Röcker, M. Ziefle, A. Holzinger, From Computer Innovation to Human Integration: Current Trends and Challenges for Pervasive Health Technologies, in: A. Holzinger, M. Ziefle, C. Röcker (Eds.), Pervasive Health, Springer, London, 2014: pp. 1–17.","apa":"Röcker, C., Ziefle, M., & Holzinger, A. (2014). From Computer Innovation to Human Integration: Current Trends and Challenges for Pervasive Health Technologies. In A. Holzinger, M. Ziefle, & C. Röcker (Eds.), Pervasive Health (pp. 1–17). London: Springer. https://doi.org/10.1007/978-1-4471-6413-5_1","ieee":"C. Röcker, M. Ziefle, and A. Holzinger, “From Computer Innovation to Human Integration: Current Trends and Challenges for Pervasive Health Technologies,” in Pervasive Health, A. Holzinger, M. Ziefle, and C. Röcker, Eds. London: Springer, 2014, pp. 1–17.","chicago":"Röcker, Carsten, Martina Ziefle, and Andreas Holzinger. “From Computer Innovation to Human Integration: Current Trends and Challenges for Pervasive Health Technologies.” In Pervasive Health, edited by Andreas Holzinger, Martina Ziefle, and Carsten Röcker, 1–17. Human–Computer Interaction Series. London: Springer, 2014. https://doi.org/10.1007/978-1-4471-6413-5_1."},"year":2014,"author":[{"first_name":"Carsten","full_name":"Röcker, Carsten","last_name":"Röcker","id":"61525"},{"full_name":"Ziefle, Martina","first_name":"Martina","last_name":"Ziefle"},{"last_name":"Holzinger","first_name":"Andreas","full_name":"Holzinger, Andreas"}],"main_file_link":[{"open_access":"1"}],"page":"1 - 17","status":"public","date_created":"2021-01-14T10:13:24Z","publication_identifier":{"isbn":["978-1-4471-6412-8"],"eisbn":["978-1-4471-6413-5"],"issn":["1571-5035"]},"publication":"Pervasive Health","date_updated":"2023-03-15T13:49:52Z","editor":[{"first_name":"Andreas","full_name":"Holzinger, Andreas","last_name":"Holzinger"},{"last_name":"Ziefle","full_name":"Ziefle, Martina","first_name":"Martina"},{"first_name":"Carsten","id":"61525","full_name":"Röcker, Carsten","last_name":"Röcker"}],"oa":"1","language":[{"iso":"eng"}],"keyword":["Pervasive health","Ambient assisted living","E-Health","Trends","Research challenges","Design requirements"]},{"_id":"4376","doi":"10.11159/vwhci.2014.009","place":"Orléans, ON","intvolume":" 2","user_id":"15514","type":"journal_article","publisher":"Avestia Publishing, International ASET Inc.","abstract":[{"text":"This paper analyzes the requirements of users of different generations with regard to future e-banking systems. An empirical study was conducted to verify six previously formulated hypotheses. The results show that the acceptance of such systems highly depends on factors such as age, gender and general technical affinity. It turned out that most of the older people are not yet willing to use such systems at all – independent of specific system characteristics. Additionally, it is more likely that men will use smart banking systems than women and that technical affinity has a positive influence on the general usage intention.","lang":"eng"}],"issue":"1","department":[{"_id":"DEP5023"}],"publication_status":"published","keyword":["Smart Banking","User Study","Technology Acceptance","Design Requirements."],"language":[{"iso":"eng"}],"oa":"1","date_updated":"2023-03-15T13:49:52Z","publication_identifier":{"eissn":["2368-6103"]},"publication":"International Journal of Virtual Worlds and Human Computer Interaction","date_created":"2021-01-14T10:13:25Z","status":"public","page":"83 - 91","author":[{"id":"61525","full_name":"Röcker, Carsten","first_name":"Carsten","last_name":"Röcker"},{"full_name":"Kaulen, Daniel","first_name":"Daniel","last_name":"Kaulen"}],"year":2014,"main_file_link":[{"open_access":"1"}],"volume":2,"citation":{"apa":"Röcker, C., & Kaulen, D. (2014). Smart Banking: User Characteristics and Their Effects on the Usage of Emerging Banking Applications. International Journal of Virtual Worlds and Human Computer Interaction, 2(1), 83–91. https://doi.org/10.11159/vwhci.2014.009","chicago":"Röcker, Carsten, and Daniel Kaulen. “Smart Banking: User Characteristics and Their Effects on the Usage of Emerging Banking Applications.” International Journal of Virtual Worlds and Human Computer Interaction 2, no. 1 (2014): 83–91. https://doi.org/10.11159/vwhci.2014.009.","van":"Röcker C, Kaulen D. Smart Banking: User Characteristics and Their Effects on the Usage of Emerging Banking Applications. International Journal of Virtual Worlds and Human Computer Interaction. 2014;2(1):83–91.","havard":"C. Röcker, D. Kaulen, Smart Banking: User Characteristics and Their Effects on the Usage of Emerging Banking Applications, International Journal of Virtual Worlds and Human Computer Interaction. 2 (2014) 83–91.","bjps":"Röcker C and Kaulen D (2014) Smart Banking: User Characteristics and Their Effects on the Usage of Emerging Banking Applications. International Journal of Virtual Worlds and Human Computer Interaction 2, 83–91.","mla":"Röcker, Carsten, and Daniel Kaulen. “Smart Banking: User Characteristics and Their Effects on the Usage of Emerging Banking Applications.” International Journal of Virtual Worlds and Human Computer Interaction, vol. 2, no. 1, Avestia Publishing, International ASET Inc., 2014, pp. 83–91, doi:10.11159/vwhci.2014.009.","ufg":"Röcker, Carsten/Kaulen, Daniel (2014): Smart Banking: User Characteristics and Their Effects on the Usage of Emerging Banking Applications, in: International Journal of Virtual Worlds and Human Computer Interaction 2 (1), S. 83–91.","short":"C. Röcker, D. Kaulen, International Journal of Virtual Worlds and Human Computer Interaction 2 (2014) 83–91.","din1505-2-1":"Röcker, Carsten ; Kaulen, Daniel: Smart Banking: User Characteristics and Their Effects on the Usage of Emerging Banking Applications. In: International Journal of Virtual Worlds and Human Computer Interaction Bd. 2. Orléans, ON, Avestia Publishing, International ASET Inc. (2014), Nr. 1, S. 83–91","chicago-de":"Röcker, Carsten und Daniel Kaulen. 2014. Smart Banking: User Characteristics and Their Effects on the Usage of Emerging Banking Applications. International Journal of Virtual Worlds and Human Computer Interaction 2, Nr. 1: 83–91. doi:10.11159/vwhci.2014.009, .","ieee":"C. Röcker and D. Kaulen, “Smart Banking: User Characteristics and Their Effects on the Usage of Emerging Banking Applications,” International Journal of Virtual Worlds and Human Computer Interaction, vol. 2, no. 1, pp. 83–91, 2014.","ama":"Röcker C, Kaulen D. Smart Banking: User Characteristics and Their Effects on the Usage of Emerging Banking Applications. International Journal of Virtual Worlds and Human Computer Interaction. 2014;2(1):83-91. doi:10.11159/vwhci.2014.009"},"title":"Smart Banking: User Characteristics and Their Effects on the Usage of Emerging Banking Applications","extern":"1"},{"status":"public","page":"28 - 36","author":[{"first_name":"Oliver","last_name":"Sack","full_name":"Sack, Oliver"},{"full_name":"Röcker, Carsten","last_name":"Röcker","id":"61525","first_name":"Carsten"}],"main_file_link":[{"open_access":"1"}],"year":2014,"citation":{"ama":"Sack O, Röcker C. “Like a Family Member Who Takes Care of Me” – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments. International Journal of Virtual Worlds and Human Computer Interaction. 2014;2(1):28-36. doi:10.11159/vwhci.2014.004","van":"Sack O, Röcker C. “Like a Family Member Who Takes Care of Me” – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments. International Journal of Virtual Worlds and Human Computer Interaction. 2014;2(1):28–36.","havard":"O. Sack, C. Röcker, “Like a Family Member Who Takes Care of Me” – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments, International Journal of Virtual Worlds and Human Computer Interaction. 2 (2014) 28–36.","bjps":"Sack O and Röcker C (2014) “Like a Family Member Who Takes Care of Me” – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments. International Journal of Virtual Worlds and Human Computer Interaction 2, 28–36.","mla":"Sack, Oliver, and Carsten Röcker. “‘Like a Family Member Who Takes Care of Me’ – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments.” International Journal of Virtual Worlds and Human Computer Interaction, vol. 2, no. 1, Avestia Publishing, International ASET Inc. , 2014, pp. 28–36, doi:10.11159/vwhci.2014.004.","ufg":"Sack, Oliver/Röcker, Carsten (2014): “Like a Family Member Who Takes Care of Me” – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments, in: International Journal of Virtual Worlds and Human Computer Interaction 2 (1), S. 28–36.","ieee":"O. Sack and C. Röcker, “‘Like a Family Member Who Takes Care of Me’ – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments,” International Journal of Virtual Worlds and Human Computer Interaction, vol. 2, no. 1, pp. 28–36, 2014.","apa":"Sack, O., & Röcker, C. (2014). “Like a Family Member Who Takes Care of Me” – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments. International Journal of Virtual Worlds and Human Computer Interaction, 2(1), 28–36. https://doi.org/10.11159/vwhci.2014.004","chicago":"Sack, Oliver, and Carsten Röcker. “‘Like a Family Member Who Takes Care of Me’ – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments.” International Journal of Virtual Worlds and Human Computer Interaction 2, no. 1 (2014): 28–36. https://doi.org/10.11159/vwhci.2014.004.","short":"O. Sack, C. Röcker, International Journal of Virtual Worlds and Human Computer Interaction 2 (2014) 28–36.","chicago-de":"Sack, Oliver und Carsten Röcker. 2014. “Like a Family Member Who Takes Care of Me” – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments. International Journal of Virtual Worlds and Human Computer Interaction 2, Nr. 1: 28–36. doi:10.11159/vwhci.2014.004, .","din1505-2-1":"Sack, Oliver ; Röcker, Carsten: “Like a Family Member Who Takes Care of Me” – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments. In: International Journal of Virtual Worlds and Human Computer Interaction Bd. 2. Orléans, ON , Avestia Publishing, International ASET Inc. (2014), Nr. 1, S. 28–36"},"volume":2,"title":"“Like a Family Member Who Takes Care of Me” – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments","extern":"1","keyword":["Smart environment","e-health","user study","mental model","anthropomorphism","metaphor","technology acceptance","trust","evaluation"],"language":[{"iso":"eng"}],"oa":"1","date_updated":"2023-03-15T13:49:52Z","publication":"International Journal of Virtual Worlds and Human Computer Interaction","publication_identifier":{"eissn":["2368-6103"]},"date_created":"2021-01-14T10:13:27Z","publisher":" Avestia Publishing, International ASET Inc. ","department":[{"_id":"DEP5023"}],"abstract":[{"text":"Within the last years the concept of trust has attracted increased attention in the field of smart home environments. However, little is known about what determines trustworthiness in this context. For this reason the objective was to examine mental models in terms of anthropomorphic perception of smart home environments and its relation to trustworthiness. Two studies (N=36) were carried out in the Future Care Lab, a simulated intelligent home environment. We used the teach-back method to help participants to talk about the smart home environment technology and asked to generate a metaphor of an experienced home-monitoring scenario. Finally, we applied linguistic analysis of responses to detect anthropomorphic characteristics. In general, results demonstrate inspiring metaphors related to the personal assistance system, e.g. \"like an airbag…\" or \"like a family member…\", which might be useful for future interface designs and approaches of communication in the context of smart home environments. However, no relation of anthropomorphism and trustworthiness could be found. Therefore, we suggest an anthropomorphic threshold, which should be investigated by using an improved method and trust scale.","lang":"eng"}],"issue":"1","publication_status":"published","place":" Orléans, ON ","_id":"4377","doi":"10.11159/vwhci.2014.004","user_id":"15514","intvolume":" 2","type":"journal_article"},{"type":"conference","user_id":"15514","intvolume":" 1","place":" [S.l.] ","_id":"4378","doi":"10.5220/0004884901670172","publication_status":"published","conference":{"start_date":"2014-01-07","end_date":"20014-01-09","location":"Lisbon, Portugal","name":"International Conference on Physiological Computing Systems (PhyCS'14)"},"department":[{"_id":"DEP5023"}],"issue":"PhyCS","abstract":[{"text":"The development of a widely applicable automatic motion coaching system requires one to address a lot of issues including motion capturing, motion analysis and comparison, error detection as well as error feedback. In order to cope with this complexity, most existing approaches focus on a specific motion sequence or exercise. As a first step towards the development of a more generic system, this paper systematically analyzes different error and feedback types. A prototype of a feedback system that addresses multiple modalities is presented. The system allows to evaluate the applicability of the proposed feedback techniques for arbitrary types of motions in a next step.","lang":"eng"}],"publisher":" SCITEPRESS ","publication":"Proceedings of the International Conference on Physiological Computing Systems (PhyCS'14)","publication_identifier":{"unknown":["978-989-758-006-2"]},"date_created":"2021-01-14T10:13:28Z","date_updated":"2023-03-15T13:49:52Z","corporate_editor":[" Institute for Systems and Technologies of Information, Control and Communication"],"editor":[{"last_name":"Holzinger","full_name":"Holzinger, Andreas","first_name":"Andreas"}],"oa":"1","keyword":["Motion Coaching","Motion Error Feedback","Prototyping","Error Visualization","Error Audiolization."],"language":[{"iso":"eng"}],"title":"Towards an Automatic Motion Coaching System: Feedback Techniques for Different Types of Motion Errors","extern":"1","citation":{"ieee":"N. Ukita, D. Kaulen, and C. Röcker, “Towards an Automatic Motion Coaching System: Feedback Techniques for Different Types of Motion Errors,” in Proceedings of the International Conference on Physiological Computing Systems (PhyCS’14), Lisbon, Portugal, 2014, vol. 1, no. PhyCS, pp. 167–172.","ama":"Ukita N, Kaulen D, Röcker C. Towards an Automatic Motion Coaching System: Feedback Techniques for Different Types of Motion Errors. In: Holzinger A, Institute for Systems and Technologies of Information, Control and Communication, eds. Proceedings of the International Conference on Physiological Computing Systems (PhyCS’14). Vol 1. [S.l.] : SCITEPRESS ; 2014:167-172. doi:10.5220/0004884901670172","chicago":"Ukita, Norimichi, Daniel Kaulen, and Carsten Röcker. “Towards an Automatic Motion Coaching System: Feedback Techniques for Different Types of Motion Errors.” In Proceedings of the International Conference on Physiological Computing Systems (PhyCS’14), edited by Andreas Holzinger and Institute for Systems and Technologies of Information, Control and Communication, 1:167–72. [S.l.] : SCITEPRESS , 2014. https://doi.org/10.5220/0004884901670172.","apa":"Ukita, N., Kaulen, D., & Röcker, C. (2014). Towards an Automatic Motion Coaching System: Feedback Techniques for Different Types of Motion Errors. In A. Holzinger & Institute for Systems and Technologies of Information, Control and Communication (Eds.), Proceedings of the International Conference on Physiological Computing Systems (PhyCS’14) (Vol. 1, pp. 167–172). [S.l.] : SCITEPRESS . https://doi.org/10.5220/0004884901670172","bjps":"Ukita N, Kaulen D and Röcker C (2014) Towards an Automatic Motion Coaching System: Feedback Techniques for Different Types of Motion Errors. In Holzinger A and Institute for Systems and Technologies of Information, Control and Communication (eds), Proceedings of the International Conference on Physiological Computing Systems (PhyCS’14), vol. 1. [S.l.] : SCITEPRESS , pp. 167–172.","havard":"N. Ukita, D. Kaulen, C. Röcker, Towards an Automatic Motion Coaching System: Feedback Techniques for Different Types of Motion Errors, in: A. Holzinger, Institute for Systems and Technologies of Information, Control and Communication (Eds.), Proceedings of the International Conference on Physiological Computing Systems (PhyCS’14), SCITEPRESS , [S.l.] , 2014: pp. 167–172.","mla":"Ukita, Norimichi, et al. “Towards an Automatic Motion Coaching System: Feedback Techniques for Different Types of Motion Errors.” Proceedings of the International Conference on Physiological Computing Systems (PhyCS’14), edited by Andreas Holzinger and Institute for Systems and Technologies of Information, Control and Communication, vol. 1, no. PhyCS, SCITEPRESS , 2014, pp. 167–72, doi:10.5220/0004884901670172.","ufg":"Ukita, Norimichi et. al. (2014): Towards an Automatic Motion Coaching System: Feedback Techniques for Different Types of Motion Errors, in: Andreas Holzinger/ Institute for Systems and Technologies of Information, Control and Communication (Hgg.): Proceedings of the International Conference on Physiological Computing Systems (PhyCS’14) (= 1), [S.l.] , S. 167–172.","van":"Ukita N, Kaulen D, Röcker C. Towards an Automatic Motion Coaching System: Feedback Techniques for Different Types of Motion Errors. In: Holzinger A, Institute for Systems and Technologies of Information, Control and Communication, editors. Proceedings of the International Conference on Physiological Computing Systems (PhyCS’14). [S.l.] : SCITEPRESS ; 2014. p. 167–72.","chicago-de":"Ukita, Norimichi, Daniel Kaulen und Carsten Röcker. 2014. Towards an Automatic Motion Coaching System: Feedback Techniques for Different Types of Motion Errors. In: Proceedings of the International Conference on Physiological Computing Systems (PhyCS’14), hg. von Andreas Holzinger und Institute for Systems and Technologies of Information, Control and Communication, 1:167–172. [S.l.] : SCITEPRESS . doi:10.5220/0004884901670172, .","din1505-2-1":"Ukita, Norimichi ; Kaulen, Daniel ; Röcker, Carsten: Towards an Automatic Motion Coaching System: Feedback Techniques for Different Types of Motion Errors. In: Holzinger, A. ; Institute for Systems and Technologies of Information, Control and Communication (Hrsg.): Proceedings of the International Conference on Physiological Computing Systems (PhyCS’14). Bd. 1. [S.l.] : SCITEPRESS , 2014, S. 167–172","short":"N. Ukita, D. Kaulen, C. Röcker, in: A. Holzinger, Institute for Systems and Technologies of Information, Control and Communication (Eds.), Proceedings of the International Conference on Physiological Computing Systems (PhyCS’14), SCITEPRESS , [S.l.] , 2014, pp. 167–172."},"volume":1,"author":[{"last_name":"Ukita","first_name":"Norimichi","full_name":"Ukita, Norimichi"},{"first_name":"Daniel","last_name":"Kaulen","full_name":"Kaulen, Daniel"},{"id":"61525","first_name":"Carsten","last_name":"Röcker","full_name":"Röcker, Carsten"}],"year":2014,"main_file_link":[{"open_access":"1"}],"status":"public","page":"167 - 172"},{"title":"Die Produktion von morgen","citation":{"chicago-de":"Jasperneite, Jürgen. 2014. Die Produktion von morgen. In: .","din1505-2-1":"Jasperneite, Jürgen: Die Produktion von morgen. In: , 2014","short":"J. Jasperneite, in: 2014.","havard":"J. Jasperneite, Die Produktion von morgen, in: 2014.","mla":"Jasperneite, Jürgen. Die Produktion von Morgen. 2014.","bjps":"Jasperneite J (2014) Die Produktion von Morgen.","ufg":"Jasperneite, Jürgen (2014): Die Produktion von morgen, in: .","ama":"Jasperneite J. Die Produktion von morgen. In: ; 2014.","van":"Jasperneite J. Die Produktion von morgen. In 2014.","chicago":"Jasperneite, Jürgen. “Die Produktion von Morgen,” 2014.","ieee":"J. Jasperneite, “Die Produktion von morgen,” presented at the Innovationstag 2014 IHK NRW “Industrie 4.0 - Die Produktion von morgen,” Neuss, 2014.","apa":"Jasperneite, J. (2014). Die Produktion von morgen. Presented at the Innovationstag 2014 IHK NRW “Industrie 4.0 - Die Produktion von morgen,” Neuss."},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"name":"Innovationstag 2014 IHK NRW \"Industrie 4.0 - Die Produktion von morgen\"","location":"Neuss"},"author":[{"full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","id":"1899","first_name":"Jürgen"}],"year":2014,"status":"public","type":"conference","date_created":"2021-01-26T14:19:47Z","date_updated":"2023-03-15T13:49:53Z","user_id":"45673","language":[{"iso":"eng"}],"_id":"4549"},{"_id":"4550","language":[{"iso":"eng"}],"user_id":"45673","date_updated":"2023-03-15T13:49:53Z","publication":"OPC-UA as pioneer of Industry 4.0 (R)Evolution (OPC Foundation) ","date_created":"2021-01-26T14:21:05Z","type":"journal_article","status":"public","year":2014,"author":[{"id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen","last_name":"Jasperneite"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"citation":{"short":"J. Jasperneite, OPC-UA as Pioneer of Industry 4.0 (R)Evolution (OPC Foundation) (2014).","chicago-de":"Jasperneite, Jürgen. 2014. OPC UA on chip level as an enabler for Industry 4.0. OPC-UA as pioneer of Industry 4.0 (R)Evolution (OPC Foundation) .","din1505-2-1":"Jasperneite, Jürgen: OPC UA on chip level as an enabler for Industry 4.0. In: OPC-UA as pioneer of Industry 4.0 (R)Evolution (OPC Foundation) (2014)","ieee":"J. Jasperneite, “OPC UA on chip level as an enabler for Industry 4.0,” OPC-UA as pioneer of Industry 4.0 (R)Evolution (OPC Foundation) , 2014.","apa":"Jasperneite, J. (2014). OPC UA on chip level as an enabler for Industry 4.0. OPC-UA as Pioneer of Industry 4.0 (R)Evolution (OPC Foundation) .","chicago":"Jasperneite, Jürgen. “OPC UA on Chip Level as an Enabler for Industry 4.0.” OPC-UA as Pioneer of Industry 4.0 (R)Evolution (OPC Foundation) , 2014.","ama":"Jasperneite J. OPC UA on chip level as an enabler for Industry 4.0. OPC-UA as pioneer of Industry 40 (R)Evolution (OPC Foundation) . 2014.","van":"Jasperneite J. OPC UA on chip level as an enabler for Industry 4.0. OPC-UA as pioneer of Industry 40 (R)Evolution (OPC Foundation) . 2014;","mla":"Jasperneite, Jürgen. “OPC UA on Chip Level as an Enabler for Industry 4.0.” OPC-UA as Pioneer of Industry 4.0 (R)Evolution (OPC Foundation) , 2014.","havard":"J. Jasperneite, OPC UA on chip level as an enabler for Industry 4.0, OPC-UA as Pioneer of Industry 4.0 (R)Evolution (OPC Foundation) . (2014).","bjps":"Jasperneite J (2014) OPC UA on Chip Level as an Enabler for Industry 4.0. OPC-UA as pioneer of Industry 4.0 (R)Evolution (OPC Foundation) .","ufg":"Jasperneite, Jürgen (2014): OPC UA on chip level as an enabler for Industry 4.0, in: OPC-UA as pioneer of Industry 4.0 (R)Evolution (OPC Foundation) ."},"title":"OPC UA on chip level as an enabler for Industry 4.0"},{"citation":{"ama":"Jasperneite J. Industrie 4.0 zum Anfasse - Beispiele aus der Modellfabrik. In: ; 2014.","ieee":"J. Jasperneite, “Industrie 4.0 zum Anfasse - Beispiele aus der Modellfabrik,” presented at the 19. Industrial Communication Congress, Bad Pyrmont, 2014.","ufg":"Jasperneite, Jürgen (2014): Industrie 4.0 zum Anfasse - Beispiele aus der Modellfabrik, in: .","havard":"J. Jasperneite, Industrie 4.0 zum Anfasse - Beispiele aus der Modellfabrik, in: 2014.","mla":"Jasperneite, Jürgen. Industrie 4.0 Zum Anfasse - Beispiele Aus Der Modellfabrik. 2014.","bjps":"Jasperneite J (2014) Industrie 4.0 Zum Anfasse - Beispiele Aus Der Modellfabrik.","van":"Jasperneite J. Industrie 4.0 zum Anfasse - Beispiele aus der Modellfabrik. In 2014.","chicago":"Jasperneite, Jürgen. “Industrie 4.0 Zum Anfasse - Beispiele Aus Der Modellfabrik,” 2014.","apa":"Jasperneite, J. (2014). Industrie 4.0 zum Anfasse - Beispiele aus der Modellfabrik. Presented at the 19. Industrial Communication Congress, Bad Pyrmont.","chicago-de":"Jasperneite, Jürgen. 2014. Industrie 4.0 zum Anfasse - Beispiele aus der Modellfabrik. In: .","din1505-2-1":"Jasperneite, Jürgen: Industrie 4.0 zum Anfasse - Beispiele aus der Modellfabrik. In: , 2014","short":"J. Jasperneite, in: 2014."},"title":"Industrie 4.0 zum Anfasse - Beispiele aus der Modellfabrik","status":"public","author":[{"last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"}],"year":2014,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"location":"Bad Pyrmont","name":"19. Industrial Communication Congress"},"user_id":"45673","date_updated":"2023-03-15T13:49:53Z","date_created":"2021-01-26T14:22:25Z","type":"conference","language":[{"iso":"eng"}],"_id":"4551"},{"_id":"4552","language":[{"iso":"eng"}],"publication":"ATP edition - Automatisierungstechnische Praxis","type":"journal_article","date_created":"2021-01-26T14:27:39Z","user_id":"45673","date_updated":"2023-03-15T13:49:53Z","author":[{"full_name":"Frey, Christian","first_name":"Christian","last_name":"Frey"},{"last_name":"Heinzmann","first_name":"Michael","full_name":"Heinzmann, Michael"},{"id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"},{"last_name":"Niggemann","first_name":"Oliver","full_name":"Niggemann, Oliver","id":"10876"},{"full_name":"Sauer, Olaf","last_name":"Sauer","first_name":"Olaf"},{"last_name":"Schleipen","full_name":"Schleipen, Miriam","first_name":"Miriam"},{"last_name":"Usländer","full_name":"Usländer, Thomas","first_name":"Thomas"},{"full_name":"Voit, Michael","last_name":"Voit","first_name":"Michael"}],"year":2014,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public","title":"IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0","citation":{"din1505-2-1":"Frey, Christian ; Heinzmann, Michael ; Jasperneite, Jürgen ; Niggemann, Oliver ; Sauer, Olaf ; Schleipen, Miriam ; Usländer, Thomas ; Voit, Michael: IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0. In: ATP edition - Automatisierungstechnische Praxis (2014)","chicago-de":"Frey, Christian, Michael Heinzmann, Jürgen Jasperneite, Oliver Niggemann, Olaf Sauer, Miriam Schleipen, Thomas Usländer und Michael Voit. 2014. IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0. ATP edition - Automatisierungstechnische Praxis.","short":"C. Frey, M. Heinzmann, J. Jasperneite, O. Niggemann, O. Sauer, M. Schleipen, T. Usländer, M. Voit, ATP Edition - Automatisierungstechnische Praxis (2014).","ufg":"Frey, Christian et. al. (2014): IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0, in: ATP edition - Automatisierungstechnische Praxis.","mla":"Frey, Christian, et al. “IKT in Der Fabrik Der Zukunft - Ein Diskussionsbeitrag Zu Industrie 4.0.” ATP Edition - Automatisierungstechnische Praxis, 2014.","bjps":"Frey C et al. (2014) IKT in Der Fabrik Der Zukunft - Ein Diskussionsbeitrag Zu Industrie 4.0. ATP edition - Automatisierungstechnische Praxis.","havard":"C. Frey, M. Heinzmann, J. Jasperneite, O. Niggemann, O. Sauer, M. Schleipen, T. Usländer, M. Voit, IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0, ATP Edition - Automatisierungstechnische Praxis. (2014).","van":"Frey C, Heinzmann M, Jasperneite J, Niggemann O, Sauer O, Schleipen M, et al. IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0. ATP edition - Automatisierungstechnische Praxis. 2014;","chicago":"Frey, Christian, Michael Heinzmann, Jürgen Jasperneite, Oliver Niggemann, Olaf Sauer, Miriam Schleipen, Thomas Usländer, and Michael Voit. “IKT in Der Fabrik Der Zukunft - Ein Diskussionsbeitrag Zu Industrie 4.0.” ATP Edition - Automatisierungstechnische Praxis, 2014.","apa":"Frey, C., Heinzmann, M., Jasperneite, J., Niggemann, O., Sauer, O., Schleipen, M., … Voit, M. (2014). IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0. ATP Edition - Automatisierungstechnische Praxis.","ama":"Frey C, Heinzmann M, Jasperneite J, et al. IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0. ATP edition - Automatisierungstechnische Praxis. 2014.","ieee":"C. Frey et al., “IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0,” ATP edition - Automatisierungstechnische Praxis, 2014."}},{"type":"conference","date_created":"2021-01-26T14:31:12Z","user_id":"45673","date_updated":"2023-03-15T13:49:53Z","language":[{"iso":"eng"}],"_id":"4553","title":"Control-as-a-Service from the Cloud: A Case Study for using Virtualized PLCs","citation":{"short":"J. Imtiaz, J. Jasperneite, H. Trsek, in: 2014.","din1505-2-1":"Imtiaz, Jahanzaib ; Jasperneite, Jürgen ; Trsek, Henning: Control-as-a-Service from the Cloud: A Case Study for using Virtualized PLCs. In: , 2014","chicago-de":"Imtiaz, Jahanzaib, Jürgen Jasperneite und Henning Trsek. 2014. Control-as-a-Service from the Cloud: A Case Study for using Virtualized PLCs. In: .","van":"Imtiaz J, Jasperneite J, Trsek H. Control-as-a-Service from the Cloud: A Case Study for using Virtualized PLCs. In 2014.","ufg":"Imtiaz, Jahanzaib et. al. (2014): Control-as-a-Service from the Cloud: A Case Study for using Virtualized PLCs, in: .","havard":"J. Imtiaz, J. Jasperneite, H. Trsek, Control-as-a-Service from the Cloud: A Case Study for using Virtualized PLCs, in: 2014.","bjps":"Imtiaz J, Jasperneite J and Trsek H (2014) Control-as-a-Service from the Cloud: A Case Study for Using Virtualized PLCs.","mla":"Imtiaz, Jahanzaib, et al. Control-as-a-Service from the Cloud: A Case Study for Using Virtualized PLCs. 2014.","apa":"Imtiaz, J., Jasperneite, J., & Trsek, H. (2014). Control-as-a-Service from the Cloud: A Case Study for using Virtualized PLCs. Presented at the : IEEE Workshop on Factory Communication Systems (WFCS’2014) , Toulouse, France.","chicago":"Imtiaz, Jahanzaib, Jürgen Jasperneite, and Henning Trsek. “Control-as-a-Service from the Cloud: A Case Study for Using Virtualized PLCs,” 2014.","ama":"Imtiaz J, Jasperneite J, Trsek H. Control-as-a-Service from the Cloud: A Case Study for using Virtualized PLCs. In: ; 2014.","ieee":"J. Imtiaz, J. Jasperneite, and H. Trsek, “Control-as-a-Service from the Cloud: A Case Study for using Virtualized PLCs,” presented at the : IEEE Workshop on Factory Communication Systems (WFCS’2014) , Toulouse, France, 2014."},"author":[{"last_name":"Imtiaz","full_name":"Imtiaz, Jahanzaib","first_name":"Jahanzaib"},{"last_name":"Jasperneite","first_name":"Jürgen","id":"1899","full_name":"Jasperneite, Jürgen"},{"first_name":"Henning","full_name":"Trsek, Henning","id":"1486","last_name":"Trsek"}],"year":2014,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"name":": IEEE Workshop on Factory Communication Systems (WFCS’2014) ","location":"Toulouse, France"},"status":"public"},{"_id":"4554","language":[{"iso":"eng"}],"type":"conference","date_created":"2021-01-26T14:33:07Z","user_id":"45673","date_updated":"2023-03-15T13:49:53Z","author":[{"full_name":"Dürkop, Lars","last_name":"Dürkop","first_name":"Lars"},{"first_name":"Henning","last_name":"Trsek","id":"1486","full_name":"Trsek, Henning"},{"last_name":"Otto","full_name":"Otto, Jens","first_name":"Jens"},{"full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","id":"1899","first_name":"Jürgen"}],"year":2014,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"name":"10th IEEE Workshop on Factory Communication Systems ","location":"Toulouse"},"status":"public","title":"A field level architecture for reconfigurable real-time automation systems","citation":{"din1505-2-1":"Dürkop, Lars ; Trsek, Henning ; Otto, Jens ; Jasperneite, Jürgen: A field level architecture for reconfigurable real-time automation systems. In: , 2014","chicago-de":"Dürkop, Lars, Henning Trsek, Jens Otto und Jürgen Jasperneite. 2014. A field level architecture for reconfigurable real-time automation systems. In: .","short":"L. Dürkop, H. Trsek, J. Otto, J. Jasperneite, in: 2014.","chicago":"Dürkop, Lars, Henning Trsek, Jens Otto, and Jürgen Jasperneite. “A Field Level Architecture for Reconfigurable Real-Time Automation Systems,” 2014.","apa":"Dürkop, L., Trsek, H., Otto, J., & Jasperneite, J. (2014). A field level architecture for reconfigurable real-time automation systems. Presented at the 10th IEEE Workshop on Factory Communication Systems , Toulouse.","ufg":"Dürkop, Lars et. al. (2014): A field level architecture for reconfigurable real-time automation systems, in: .","havard":"L. Dürkop, H. Trsek, J. Otto, J. Jasperneite, A field level architecture for reconfigurable real-time automation systems, in: 2014.","mla":"Dürkop, Lars, et al. A Field Level Architecture for Reconfigurable Real-Time Automation Systems. 2014.","bjps":"Dürkop L et al. (2014) A Field Level Architecture for Reconfigurable Real-Time Automation Systems.","van":"Dürkop L, Trsek H, Otto J, Jasperneite J. A field level architecture for reconfigurable real-time automation systems. In 2014.","ieee":"L. Dürkop, H. Trsek, J. Otto, and J. Jasperneite, “A field level architecture for reconfigurable real-time automation systems,” presented at the 10th IEEE Workshop on Factory Communication Systems , Toulouse, 2014.","ama":"Dürkop L, Trsek H, Otto J, Jasperneite J. A field level architecture for reconfigurable real-time automation systems. In: ; 2014."}},{"language":[{"iso":"eng"}],"_id":"4555","type":"conference","date_created":"2021-01-26T14:35:58Z","user_id":"45673","date_updated":"2023-03-15T13:49:53Z","year":2014,"author":[{"full_name":"Jasperneite, Jürgen","first_name":"Jürgen","id":"1899","last_name":"Jasperneite"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"location":"IHK Südwestfalen, Hagen "},"status":"public","title":"Intelligente Vernetzung für die Produktionstechnik von morgen. In: Industrie 4.0 - Revolution in der Produktion? ","citation":{"ama":"Jasperneite J. Intelligente Vernetzung für die Produktionstechnik von morgen. In: Industrie 4.0 - Revolution in der Produktion? . In: ; 2014.","ieee":"J. Jasperneite, “Intelligente Vernetzung für die Produktionstechnik von morgen. In: Industrie 4.0 - Revolution in der Produktion? ,” IHK Südwestfalen, Hagen , 2014.","short":"J. Jasperneite, in: 2014.","din1505-2-1":"Jasperneite, Jürgen: Intelligente Vernetzung für die Produktionstechnik von morgen. In: Industrie 4.0 - Revolution in der Produktion? . In: , 2014","chicago-de":"Jasperneite, Jürgen. 2014. Intelligente Vernetzung für die Produktionstechnik von morgen. In: Industrie 4.0 - Revolution in der Produktion? . In: .","van":"Jasperneite J. Intelligente Vernetzung für die Produktionstechnik von morgen. In: Industrie 4.0 - Revolution in der Produktion? . In 2014.","bjps":"Jasperneite J (2014) Intelligente Vernetzung Für Die Produktionstechnik von Morgen. In: Industrie 4.0 - Revolution in Der Produktion? .","havard":"J. Jasperneite, Intelligente Vernetzung für die Produktionstechnik von morgen. In: Industrie 4.0 - Revolution in der Produktion? , in: 2014.","mla":"Jasperneite, Jürgen. Intelligente Vernetzung Für Die Produktionstechnik von Morgen. In: Industrie 4.0 - Revolution in Der Produktion? . 2014.","ufg":"Jasperneite, Jürgen (2014): Intelligente Vernetzung für die Produktionstechnik von morgen. In: Industrie 4.0 - Revolution in der Produktion? , in: .","apa":"Jasperneite, J. (2014). Intelligente Vernetzung für die Produktionstechnik von morgen. In: Industrie 4.0 - Revolution in der Produktion? . IHK Südwestfalen, Hagen .","chicago":"Jasperneite, Jürgen. “Intelligente Vernetzung Für Die Produktionstechnik von Morgen. In: Industrie 4.0 - Revolution in Der Produktion? ,” 2014."}},{"publisher":"Springer-Verlag","status":"public","year":2014,"author":[{"last_name":"Niggemann","full_name":"Niggemann, Oliver","id":"10876","first_name":"Oliver"},{"full_name":"Jasperneite, Jürgen","id":"1899","last_name":"Jasperneite","first_name":"Jürgen"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"citation":{"ufg":"Niggemann, Oliver/Jasperneite, Jürgen (2014): Konzepte und Anwendungsfälle für die intelligente Fabrik, in: Thomas Bauernhansl et. al. (Hgg.): Industrie 4.0 in Produktion, Automatisierung und Logistik .","havard":"O. Niggemann, J. Jasperneite, Konzepte und Anwendungsfälle für die intelligente Fabrik, in: T. Bauernhansl, M. ten Hompel, B. Vogel-Heuser (Eds.), Industrie 4.0 in Produktion, Automatisierung Und Logistik , Springer-Verlag, 2014.","mla":"Niggemann, Oliver, and Jürgen Jasperneite. “Konzepte Und Anwendungsfälle Für Die Intelligente Fabrik.” Industrie 4.0 in Produktion, Automatisierung Und Logistik , edited by Thomas Bauernhansl et al., Springer-Verlag, 2014.","bjps":"Niggemann O and Jasperneite J (2014) Konzepte Und Anwendungsfälle Für Die Intelligente Fabrik. In Bauernhansl T, ten Hompel M and Vogel-Heuser B (eds), Industrie 4.0 in Produktion, Automatisierung Und Logistik . Springer-Verlag.","van":"Niggemann O, Jasperneite J. Konzepte und Anwendungsfälle für die intelligente Fabrik. In: Bauernhansl T, ten Hompel M, Vogel-Heuser B, editors. Industrie 40 in Produktion, Automatisierung und Logistik . Springer-Verlag; 2014.","ama":"Niggemann O, Jasperneite J. Konzepte und Anwendungsfälle für die intelligente Fabrik. In: Bauernhansl T, ten Hompel M, Vogel-Heuser B, eds. Industrie 4.0 in Produktion, Automatisierung Und Logistik . Springer-Verlag; 2014.","chicago":"Niggemann, Oliver, and Jürgen Jasperneite. “Konzepte Und Anwendungsfälle Für Die Intelligente Fabrik.” In Industrie 4.0 in Produktion, Automatisierung Und Logistik , edited by Thomas Bauernhansl, Michael ten Hompel, and Birgit Vogel-Heuser. Springer-Verlag, 2014.","apa":"Niggemann, O., & Jasperneite, J. (2014). Konzepte und Anwendungsfälle für die intelligente Fabrik. In T. Bauernhansl, M. ten Hompel, & B. Vogel-Heuser (Eds.), Industrie 4.0 in Produktion, Automatisierung und Logistik . Springer-Verlag.","ieee":"O. Niggemann and J. Jasperneite, “Konzepte und Anwendungsfälle für die intelligente Fabrik,” in Industrie 4.0 in Produktion, Automatisierung und Logistik , T. Bauernhansl, M. ten Hompel, and B. Vogel-Heuser, Eds. Springer-Verlag, 2014.","chicago-de":"Niggemann, Oliver und Jürgen Jasperneite. 2014. Konzepte und Anwendungsfälle für die intelligente Fabrik. In: Industrie 4.0 in Produktion, Automatisierung und Logistik , hg. von Thomas Bauernhansl, Michael ten Hompel, und Birgit Vogel-Heuser. Springer-Verlag.","din1505-2-1":"Niggemann, Oliver ; Jasperneite, Jürgen: Konzepte und Anwendungsfälle für die intelligente Fabrik. In: Bauernhansl, T. ; ten Hompel, M. ; Vogel-Heuser, B. (Hrsg.): Industrie 4.0 in Produktion, Automatisierung und Logistik : Springer-Verlag, 2014","short":"O. Niggemann, J. Jasperneite, in: T. Bauernhansl, M. ten Hompel, B. Vogel-Heuser (Eds.), Industrie 4.0 in Produktion, Automatisierung Und Logistik , Springer-Verlag, 2014."},"title":"Konzepte und Anwendungsfälle für die intelligente Fabrik","_id":"4556","language":[{"iso":"eng"}],"editor":[{"last_name":"Bauernhansl","first_name":"Thomas","full_name":"Bauernhansl, Thomas"},{"first_name":"Michael","full_name":"ten Hompel, Michael","last_name":"ten Hompel"},{"last_name":"Vogel-Heuser","first_name":"Birgit","full_name":"Vogel-Heuser, Birgit"}],"user_id":"45673","date_updated":"2023-03-15T13:49:53Z","publication":"Industrie 4.0 in Produktion, Automatisierung und Logistik ","date_created":"2021-01-26T14:38:32Z","type":"book_chapter"},{"citation":{"ieee":"J. Gausemeier, R. Dumitrescu, J. Jasperneite, A. Kühn, and H. Trsek, “Der Spitzencluster it’s OWL auf dem Weg zu Industrie 4.0,” ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb, no. 5, pp. 336–346, 2014.","ama":"Gausemeier J, Dumitrescu R, Jasperneite J, Kühn A, Trsek H. Der Spitzencluster it’s OWL auf dem Weg zu Industrie 4.0. ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb. 2014;(5):336-346.","chicago-de":"Gausemeier, Jürgen, Roman Dumitrescu, Jürgen Jasperneite, Arno Kühn und Henning Trsek. 2014. Der Spitzencluster it’s OWL auf dem Weg zu Industrie 4.0. ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb, Nr. 5: 336–346.","din1505-2-1":"Gausemeier, Jürgen ; Dumitrescu, Roman ; Jasperneite, Jürgen ; Kühn, Arno ; Trsek, Henning: Der Spitzencluster it’s OWL auf dem Weg zu Industrie 4.0. In: ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb (2014), Nr. 5, S. 336–346","short":"J. Gausemeier, R. Dumitrescu, J. Jasperneite, A. Kühn, H. Trsek, ZWF - Zeitschrift Für Wirtschaftlichen Fabrikbetrieb (2014) 336–346.","chicago":"Gausemeier, Jürgen, Roman Dumitrescu, Jürgen Jasperneite, Arno Kühn, and Henning Trsek. “Der Spitzencluster It’s OWL Auf Dem Weg Zu Industrie 4.0.” ZWF - Zeitschrift Für Wirtschaftlichen Fabrikbetrieb, no. 5 (2014): 336–46.","apa":"Gausemeier, J., Dumitrescu, R., Jasperneite, J., Kühn, A., & Trsek, H. (2014). Der Spitzencluster it’s OWL auf dem Weg zu Industrie 4.0. ZWF - Zeitschrift Für Wirtschaftlichen Fabrikbetrieb, (5), 336–346.","ufg":"Gausemeier, Jürgen et. al. (2014): Der Spitzencluster it’s OWL auf dem Weg zu Industrie 4.0, in: ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb (5), S. 336–346.","havard":"J. Gausemeier, R. Dumitrescu, J. Jasperneite, A. Kühn, H. Trsek, Der Spitzencluster it’s OWL auf dem Weg zu Industrie 4.0, ZWF - Zeitschrift Für Wirtschaftlichen Fabrikbetrieb. (2014) 336–346.","bjps":"Gausemeier J et al. (2014) Der Spitzencluster It’s OWL Auf Dem Weg Zu Industrie 4.0. ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb 336–346.","mla":"Gausemeier, Jürgen, et al. “Der Spitzencluster It’s OWL Auf Dem Weg Zu Industrie 4.0.” ZWF - Zeitschrift Für Wirtschaftlichen Fabrikbetrieb, no. 5, 2014, pp. 336–46.","van":"Gausemeier J, Dumitrescu R, Jasperneite J, Kühn A, Trsek H. Der Spitzencluster it’s OWL auf dem Weg zu Industrie 4.0. ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb. 2014;(5):336–46."},"title":"Der Spitzencluster it’s OWL auf dem Weg zu Industrie 4.0","page":"336-346","status":"public","issue":"5","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"first_name":"Jürgen","last_name":"Gausemeier","full_name":"Gausemeier, Jürgen"},{"full_name":"Dumitrescu, Roman","first_name":"Roman","last_name":"Dumitrescu"},{"id":"1899","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","first_name":"Jürgen"},{"full_name":"Kühn, Arno","first_name":"Arno","last_name":"Kühn"},{"first_name":"Henning","id":"1486","full_name":"Trsek, Henning","last_name":"Trsek"}],"year":2014,"date_updated":"2023-03-15T13:49:53Z","user_id":"45673","type":"journal_article","date_created":"2021-01-26T14:41:05Z","publication":"ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb","_id":"4557","language":[{"iso":"eng"}]},{"title":"IT-Sicherheit in der Industrie 4.0","citation":{"short":"J. Jasperneite, Maschinenbau Und Metallbearbeitung Deutschland (2014).","chicago-de":"Jasperneite, Jürgen. 2014. IT-Sicherheit in der Industrie 4.0. Maschinenbau und Metallbearbeitung Deutschland.","din1505-2-1":"Jasperneite, Jürgen: IT-Sicherheit in der Industrie 4.0. In: Maschinenbau und Metallbearbeitung Deutschland, Kuhn Fachverlag GmbH & Co. KG (2014)","van":"Jasperneite J. IT-Sicherheit in der Industrie 4.0. Maschinenbau und Metallbearbeitung Deutschland. 2014;","ufg":"Jasperneite, Jürgen (2014): IT-Sicherheit in der Industrie 4.0, in: Maschinenbau und Metallbearbeitung Deutschland.","mla":"Jasperneite, Jürgen. “IT-Sicherheit in Der Industrie 4.0.” Maschinenbau Und Metallbearbeitung Deutschland, Kuhn Fachverlag GmbH & Co. KG, 2014.","bjps":"Jasperneite J (2014) IT-Sicherheit in Der Industrie 4.0. Maschinenbau und Metallbearbeitung Deutschland.","havard":"J. Jasperneite, IT-Sicherheit in der Industrie 4.0, Maschinenbau Und Metallbearbeitung Deutschland. (2014).","apa":"Jasperneite, J. (2014). IT-Sicherheit in der Industrie 4.0. Maschinenbau Und Metallbearbeitung Deutschland.","chicago":"Jasperneite, Jürgen. “IT-Sicherheit in Der Industrie 4.0.” Maschinenbau Und Metallbearbeitung Deutschland, 2014.","ama":"Jasperneite J. IT-Sicherheit in der Industrie 4.0. Maschinenbau und Metallbearbeitung Deutschland. 2014.","ieee":"J. Jasperneite, “IT-Sicherheit in der Industrie 4.0,” Maschinenbau und Metallbearbeitung Deutschland, 2014."},"year":2014,"author":[{"last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","id":"1899","first_name":"Jürgen"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"publisher":"Kuhn Fachverlag GmbH & Co. KG","status":"public","publication_identifier":{"issn":["1614-242X"]},"publication":"Maschinenbau und Metallbearbeitung Deutschland","date_created":"2021-01-26T14:42:44Z","type":"journal_article","user_id":"45673","date_updated":"2023-03-15T13:49:53Z","_id":"4558","language":[{"iso":"eng"}]},{"conference":{"name":"Forum Produktion im Maschinenbau: Produktionsprozess im Wandel, neue Chancen durch Industrie 4.0 ","location":"Gütersloh"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2014,"author":[{"last_name":"Jasperneite","first_name":"Jürgen","full_name":"Jasperneite, Jürgen","id":"1899"},{"id":"49010","last_name":"Hinrichsen","full_name":"Hinrichsen, Sven","first_name":"Sven"}],"status":"public","title":"Montage 4.0 -ergonomisch, wandlungsfähig und produktiv","citation":{"ieee":"J. Jasperneite and S. Hinrichsen, “Montage 4.0 -ergonomisch, wandlungsfähig und produktiv,” presented at the Forum Produktion im Maschinenbau: Produktionsprozess im Wandel, neue Chancen durch Industrie 4.0 , Gütersloh, 2014.","ama":"Jasperneite J, Hinrichsen S. Montage 4.0 -ergonomisch, wandlungsfähig und produktiv. In: ; 2014.","din1505-2-1":"Jasperneite, Jürgen ; Hinrichsen, Sven: Montage 4.0 -ergonomisch, wandlungsfähig und produktiv. In: , 2014","chicago-de":"Jasperneite, Jürgen und Sven Hinrichsen. 2014. Montage 4.0 -ergonomisch, wandlungsfähig und produktiv. In: .","short":"J. Jasperneite, S. Hinrichsen, in: 2014.","chicago":"Jasperneite, Jürgen, and Sven Hinrichsen. “Montage 4.0 -Ergonomisch, Wandlungsfähig Und Produktiv,” 2014.","apa":"Jasperneite, J., & Hinrichsen, S. (2014). Montage 4.0 -ergonomisch, wandlungsfähig und produktiv. Presented at the Forum Produktion im Maschinenbau: Produktionsprozess im Wandel, neue Chancen durch Industrie 4.0 , Gütersloh.","ufg":"Jasperneite, Jürgen/Hinrichsen, Sven (2014): Montage 4.0 -ergonomisch, wandlungsfähig und produktiv, in: .","havard":"J. Jasperneite, S. Hinrichsen, Montage 4.0 -ergonomisch, wandlungsfähig und produktiv, in: 2014.","mla":"Jasperneite, Jürgen, and Sven Hinrichsen. Montage 4.0 -Ergonomisch, Wandlungsfähig Und Produktiv. 2014.","bjps":"Jasperneite J and Hinrichsen S (2014) Montage 4.0 -Ergonomisch, Wandlungsfähig Und Produktiv.","van":"Jasperneite J, Hinrichsen S. Montage 4.0 -ergonomisch, wandlungsfähig und produktiv. In 2014."},"language":[{"iso":"eng"}],"_id":"4559","date_created":"2021-01-26T14:44:34Z","type":"conference","date_updated":"2023-03-15T13:49:53Z","user_id":"45673"},{"date_updated":"2023-03-15T13:49:53Z","user_id":"45673","date_created":"2021-01-26T14:48:11Z","type":"journal_article","publication":"ATP edition - Automatisierungstechnische Praxis","_id":"4561","language":[{"iso":"eng"}],"place":"München","citation":{"short":"C. Frey, M. Heinzmann, J. Jasperneite, O. Niggemann, O. Sauer, M. Schleipen, T. Usländer, ATP Edition - Automatisierungstechnische Praxis (2014).","din1505-2-1":"Frey, Christian ; Heinzmann, Michael ; Jasperneite, Jürgen ; Niggemann, Oliver ; Sauer, Olaf ; Schleipen, Miriam ; Usländer, Thomas: IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0. In: ATP edition - Automatisierungstechnische Praxis. München, DIV Vulkan Verlag (2014)","chicago-de":"Frey, Christian, Michael Heinzmann, Jürgen Jasperneite, Oliver Niggemann, Olaf Sauer, Miriam Schleipen und Thomas Usländer. 2014. IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0. ATP edition - Automatisierungstechnische Praxis.","apa":"Frey, C., Heinzmann, M., Jasperneite, J., Niggemann, O., Sauer, O., Schleipen, M., & Usländer, T. (2014). IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0. ATP Edition - Automatisierungstechnische Praxis.","ieee":"C. Frey et al., “IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0,” ATP edition - Automatisierungstechnische Praxis, 2014.","chicago":"Frey, Christian, Michael Heinzmann, Jürgen Jasperneite, Oliver Niggemann, Olaf Sauer, Miriam Schleipen, and Thomas Usländer. “IKT in Der Fabrik Der Zukunft - Ein Diskussionsbeitrag Zu Industrie 4.0.” ATP Edition - Automatisierungstechnische Praxis, 2014.","van":"Frey C, Heinzmann M, Jasperneite J, Niggemann O, Sauer O, Schleipen M, et al. IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0. ATP edition - Automatisierungstechnische Praxis. 2014;","ama":"Frey C, Heinzmann M, Jasperneite J, et al. IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0. ATP edition - Automatisierungstechnische Praxis. 2014.","ufg":"Frey, Christian et. al. (2014): IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0, in: ATP edition - Automatisierungstechnische Praxis.","havard":"C. Frey, M. Heinzmann, J. Jasperneite, O. Niggemann, O. Sauer, M. Schleipen, T. Usländer, IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0, ATP Edition - Automatisierungstechnische Praxis. (2014).","bjps":"Frey C et al. (2014) IKT in Der Fabrik Der Zukunft - Ein Diskussionsbeitrag Zu Industrie 4.0. ATP edition - Automatisierungstechnische Praxis.","mla":"Frey, Christian, et al. “IKT in Der Fabrik Der Zukunft - Ein Diskussionsbeitrag Zu Industrie 4.0.” ATP Edition - Automatisierungstechnische Praxis, DIV Vulkan Verlag, 2014."},"title":"IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0","publisher":"DIV Vulkan Verlag","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2014,"author":[{"first_name":"Christian","last_name":"Frey","full_name":"Frey, Christian"},{"full_name":"Heinzmann, Michael","first_name":"Michael","last_name":"Heinzmann"},{"last_name":"Jasperneite","first_name":"Jürgen","id":"1899","full_name":"Jasperneite, Jürgen"},{"first_name":"Oliver","last_name":"Niggemann","full_name":"Niggemann, Oliver","id":"10876"},{"full_name":"Sauer, Olaf","last_name":"Sauer","first_name":"Olaf"},{"first_name":"Miriam","full_name":"Schleipen, Miriam","last_name":"Schleipen"},{"first_name":"Thomas","last_name":"Usländer","full_name":"Usländer, Thomas"}]},{"date_created":"2021-01-26T14:51:14Z","type":"conference","user_id":"45673","date_updated":"2023-03-15T13:49:54Z","_id":"4562","language":[{"iso":"eng"}],"title":"A Flexible Context-Aware Assistance System for Industrial Applications Using Camera based Localization","citation":{"short":"J. Imtiaz, N. Koch, H. Flatt, J. Jasperneite, M. Voit, F. van de Camp, in: 2014.","din1505-2-1":"Imtiaz, Jahanzaib ; Koch, Nils ; Flatt, Holger ; Jasperneite, Jürgen ; Voit, Michael ; van de Camp, Florian: A Flexible Context-Aware Assistance System for Industrial Applications Using Camera based Localization. In: , 2014","chicago-de":"Imtiaz, Jahanzaib, Nils Koch, Holger Flatt, Jürgen Jasperneite, Michael Voit und Florian van de Camp. 2014. A Flexible Context-Aware Assistance System for Industrial Applications Using Camera based Localization. In: .","apa":"Imtiaz, J., Koch, N., Flatt, H., Jasperneite, J., Voit, M., & van de Camp, F. (2014). A Flexible Context-Aware Assistance System for Industrial Applications Using Camera based Localization. Presented at the 19th IEEE International Conference on Emerging Technology & Factory Automation (ETFA) .","ieee":"J. Imtiaz, N. Koch, H. Flatt, J. Jasperneite, M. Voit, and F. van de Camp, “A Flexible Context-Aware Assistance System for Industrial Applications Using Camera based Localization,” presented at the 19th IEEE International Conference on Emerging Technology & Factory Automation (ETFA) , 2014.","chicago":"Imtiaz, Jahanzaib, Nils Koch, Holger Flatt, Jürgen Jasperneite, Michael Voit, and Florian van de Camp. “A Flexible Context-Aware Assistance System for Industrial Applications Using Camera Based Localization,” 2014.","van":"Imtiaz J, Koch N, Flatt H, Jasperneite J, Voit M, van de Camp F. A Flexible Context-Aware Assistance System for Industrial Applications Using Camera based Localization. In 2014.","ama":"Imtiaz J, Koch N, Flatt H, Jasperneite J, Voit M, van de Camp F. A Flexible Context-Aware Assistance System for Industrial Applications Using Camera based Localization. In: ; 2014.","ufg":"Imtiaz, Jahanzaib et. al. (2014): A Flexible Context-Aware Assistance System for Industrial Applications Using Camera based Localization, in: .","havard":"J. Imtiaz, N. Koch, H. Flatt, J. Jasperneite, M. Voit, F. van de Camp, A Flexible Context-Aware Assistance System for Industrial Applications Using Camera based Localization, in: 2014.","mla":"Imtiaz, Jahanzaib, et al. A Flexible Context-Aware Assistance System for Industrial Applications Using Camera Based Localization. 2014.","bjps":"Imtiaz J et al. (2014) A Flexible Context-Aware Assistance System for Industrial Applications Using Camera Based Localization."},"author":[{"last_name":"Imtiaz","first_name":"Jahanzaib","full_name":"Imtiaz, Jahanzaib"},{"first_name":"Nils","last_name":"Koch","full_name":"Koch, Nils"},{"id":"58494","full_name":"Flatt, Holger","last_name":"Flatt","first_name":"Holger"},{"id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"},{"first_name":"Michael","full_name":"Voit, Michael","last_name":"Voit"},{"first_name":"Florian","full_name":"van de Camp, Florian","last_name":"van de Camp"}],"year":2014,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"name":"19th IEEE International Conference on Emerging Technology & Factory Automation (ETFA) "},"status":"public"},{"status":"public","author":[{"id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen","last_name":"Jasperneite"}],"year":2014,"conference":{"location":"Barcelona, Spain","name":"19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) "},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"citation":{"ama":"Jasperneite J. Towards the Smart Factory – Status and open issues. In: ; 2014.","ieee":"J. Jasperneite, “Towards the Smart Factory – Status and open issues,” presented at the 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) , Barcelona, Spain, 2014.","short":"J. Jasperneite, in: 2014.","din1505-2-1":"Jasperneite, Jürgen: Towards the Smart Factory – Status and open issues. In: , 2014","chicago-de":"Jasperneite, Jürgen. 2014. Towards the Smart Factory – Status and open issues. In: .","van":"Jasperneite J. Towards the Smart Factory – Status and open issues. In 2014.","havard":"J. Jasperneite, Towards the Smart Factory – Status and open issues, in: 2014.","bjps":"Jasperneite J (2014) Towards the Smart Factory – Status and Open Issues.","mla":"Jasperneite, Jürgen. Towards the Smart Factory – Status and Open Issues. 2014.","ufg":"Jasperneite, Jürgen (2014): Towards the Smart Factory – Status and open issues, in: .","apa":"Jasperneite, J. (2014). Towards the Smart Factory – Status and open issues. Presented at the 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) , Barcelona, Spain.","chicago":"Jasperneite, Jürgen. “Towards the Smart Factory – Status and Open Issues,” 2014."},"title":"Towards the Smart Factory – Status and open issues","language":[{"iso":"eng"}],"_id":"4563","user_id":"45673","date_updated":"2023-03-15T13:49:54Z","type":"conference","date_created":"2021-01-27T10:05:21Z"},{"status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"name":"19thIEEE International Conference on Emerging Technologies and Factory Automation (ETFA) ","location":"Barcelona, Spain"},"author":[{"first_name":"Syed Sheraz","full_name":"Gilani, Syed Sheraz","last_name":"Gilani"},{"last_name":"Tack","full_name":"Tack, Tim","first_name":"Tim"},{"first_name":"Holger","last_name":"Flatt","full_name":"Flatt, Holger","id":"58494"},{"full_name":"Jasperneite, Jürgen","id":"1899","first_name":"Jürgen","last_name":"Jasperneite"}],"year":2014,"citation":{"mla":"Gilani, Syed Sheraz, et al. An App-Based Approach for Reconfigurable Field Devices. 2014.","bjps":"Gilani SS et al. (2014) An App-Based Approach for Reconfigurable Field Devices.","havard":"S.S. Gilani, T. Tack, H. Flatt, J. Jasperneite, An App-based Approach for Reconfigurable Field Devices, in: 2014.","ufg":"Gilani, Syed Sheraz et. al. (2014): An App-based Approach for Reconfigurable Field Devices, in: .","van":"Gilani SS, Tack T, Flatt H, Jasperneite J. An App-based Approach for Reconfigurable Field Devices. In 2014.","chicago":"Gilani, Syed Sheraz, Tim Tack, Holger Flatt, and Jürgen Jasperneite. “An App-Based Approach for Reconfigurable Field Devices,” 2014.","apa":"Gilani, S. S., Tack, T., Flatt, H., & Jasperneite, J. (2014). An App-based Approach for Reconfigurable Field Devices. Presented at the 19thIEEE International Conference on Emerging Technologies and Factory Automation (ETFA) , Barcelona, Spain.","chicago-de":"Gilani, Syed Sheraz, Tim Tack, Holger Flatt und Jürgen Jasperneite. 2014. An App-based Approach for Reconfigurable Field Devices. In: .","din1505-2-1":"Gilani, Syed Sheraz ; Tack, Tim ; Flatt, Holger ; Jasperneite, Jürgen: An App-based Approach for Reconfigurable Field Devices. In: , 2014","short":"S.S. Gilani, T. Tack, H. Flatt, J. Jasperneite, in: 2014.","ama":"Gilani SS, Tack T, Flatt H, Jasperneite J. An App-based Approach for Reconfigurable Field Devices. In: ; 2014.","ieee":"S. S. Gilani, T. Tack, H. Flatt, and J. Jasperneite, “An App-based Approach for Reconfigurable Field Devices,” presented at the 19thIEEE International Conference on Emerging Technologies and Factory Automation (ETFA) , Barcelona, Spain, 2014."},"title":"An App-based Approach for Reconfigurable Field Devices","_id":"4564","language":[{"iso":"eng"}],"date_updated":"2023-03-15T13:49:54Z","user_id":"45673","type":"conference","date_created":"2021-01-27T10:07:34Z"},{"language":[{"iso":"eng"}],"_id":"4565","type":"conference","date_created":"2021-01-27T10:12:57Z","date_updated":"2023-03-15T13:49:54Z","user_id":"45673","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"name":"ETSI User Conference on Advanced Automated Testing (UCAAT 2014)","location":"Munich"},"year":2014,"author":[{"full_name":"Kumar, Barath","last_name":"Kumar","first_name":"Barath"},{"full_name":"Drath, Rainer","first_name":"Rainer","last_name":"Drath"},{"last_name":"Schroeder","first_name":"Ben","full_name":"Schroeder, Ben"},{"last_name":"Jasperneite","first_name":"Jürgen","id":"1899","full_name":"Jasperneite, Jürgen"}],"status":"public","title":"Test generation from functional 3D virtual environment models","citation":{"ufg":"Kumar, Barath et. al. (2014): Test generation from functional 3D virtual environment models, in: .","havard":"B. Kumar, R. Drath, B. Schroeder, J. Jasperneite, Test generation from functional 3D virtual environment models, in: 2014.","mla":"Kumar, Barath, et al. Test Generation from Functional 3D Virtual Environment Models. 2014.","bjps":"Kumar B et al. (2014) Test Generation from Functional 3D Virtual Environment Models.","van":"Kumar B, Drath R, Schroeder B, Jasperneite J. Test generation from functional 3D virtual environment models. In 2014.","chicago":"Kumar, Barath, Rainer Drath, Ben Schroeder, and Jürgen Jasperneite. “Test Generation from Functional 3D Virtual Environment Models,” 2014.","apa":"Kumar, B., Drath, R., Schroeder, B., & Jasperneite, J. (2014). Test generation from functional 3D virtual environment models. Presented at the ETSI User Conference on Advanced Automated Testing (UCAAT 2014), Munich.","chicago-de":"Kumar, Barath, Rainer Drath, Ben Schroeder und Jürgen Jasperneite. 2014. Test generation from functional 3D virtual environment models. In: .","din1505-2-1":"Kumar, Barath ; Drath, Rainer ; Schroeder, Ben ; Jasperneite, Jürgen: Test generation from functional 3D virtual environment models. In: , 2014","short":"B. Kumar, R. Drath, B. Schroeder, J. Jasperneite, in: 2014.","ama":"Kumar B, Drath R, Schroeder B, Jasperneite J. Test generation from functional 3D virtual environment models. In: ; 2014.","ieee":"B. Kumar, R. Drath, B. Schroeder, and J. Jasperneite, “Test generation from functional 3D virtual environment models,” presented at the ETSI User Conference on Advanced Automated Testing (UCAAT 2014), Munich, 2014."}},{"citation":{"ama":"Wisniewski L, Schumacher M, Jasperneite J, Diedrich C. Linear Time, Possibly Disjoint Path Search Approach for Ethernet Based Industrial Automation Networks. In: ; 2014.","ieee":"L. Wisniewski, M. Schumacher, J. Jasperneite, and C. Diedrich, “Linear Time, Possibly Disjoint Path Search Approach for Ethernet Based Industrial Automation Networks,” presented at the IEEE International Conference on Emerging Technology & Factory Automation, Spain, 2014.","ufg":"Wisniewski, Lukasz et. al. (2014): Linear Time, Possibly Disjoint Path Search Approach for Ethernet Based Industrial Automation Networks, in: .","bjps":"Wisniewski L et al. (2014) Linear Time, Possibly Disjoint Path Search Approach for Ethernet Based Industrial Automation Networks.","havard":"L. Wisniewski, M. Schumacher, J. Jasperneite, C. Diedrich, Linear Time, Possibly Disjoint Path Search Approach for Ethernet Based Industrial Automation Networks, in: 2014.","mla":"Wisniewski, Lukasz, et al. Linear Time, Possibly Disjoint Path Search Approach for Ethernet Based Industrial Automation Networks. 2014.","van":"Wisniewski L, Schumacher M, Jasperneite J, Diedrich C. Linear Time, Possibly Disjoint Path Search Approach for Ethernet Based Industrial Automation Networks. In 2014.","chicago":"Wisniewski, Lukasz, Markus Schumacher, Jürgen Jasperneite, and Christian Diedrich. “Linear Time, Possibly Disjoint Path Search Approach for Ethernet Based Industrial Automation Networks,” 2014.","apa":"Wisniewski, L., Schumacher, M., Jasperneite, J., & Diedrich, C. (2014). Linear Time, Possibly Disjoint Path Search Approach for Ethernet Based Industrial Automation Networks. Presented at the IEEE International Conference on Emerging Technology & Factory Automation, Spain.","chicago-de":"Wisniewski, Lukasz, Markus Schumacher, Jürgen Jasperneite und Christian Diedrich. 2014. Linear Time, Possibly Disjoint Path Search Approach for Ethernet Based Industrial Automation Networks. In: .","din1505-2-1":"Wisniewski, Lukasz ; Schumacher, Markus ; Jasperneite, Jürgen ; Diedrich, Christian: Linear Time, Possibly Disjoint Path Search Approach for Ethernet Based Industrial Automation Networks. In: , 2014","short":"L. Wisniewski, M. Schumacher, J. Jasperneite, C. Diedrich, in: 2014."},"title":"Linear Time, Possibly Disjoint Path Search Approach for Ethernet Based Industrial Automation Networks","status":"public","author":[{"first_name":"Lukasz","full_name":"Wisniewski, Lukasz","last_name":"Wisniewski","id":"1710"},{"first_name":"Markus","full_name":"Schumacher, Markus","last_name":"Schumacher"},{"id":"1899","first_name":"Jürgen","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen"},{"full_name":"Diedrich, Christian","first_name":"Christian","last_name":"Diedrich"}],"year":2014,"conference":{"name":"IEEE International Conference on Emerging Technology & Factory Automation","location":"Spain"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"user_id":"45673","date_updated":"2023-03-15T13:49:54Z","date_created":"2021-01-27T10:15:27Z","type":"conference","language":[{"iso":"eng"}],"_id":"4566"},{"language":[{"iso":"eng"}],"_id":"4567","type":"journal_article","date_created":"2021-01-27T10:18:16Z","publication":"ATP edition - Automatisierungstechnische Praxis","date_updated":"2023-03-15T13:49:54Z","user_id":"45673","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2014,"author":[{"last_name":"Flatt","first_name":"Holger","full_name":"Flatt, Holger","id":"58494"},{"full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","first_name":"Jürgen","id":"1899"},{"last_name":"Rauchfuß","first_name":"Joachim","full_name":"Rauchfuß, Joachim"}],"issue":"10","page":"32-40","status":"public","title":"Redundante Kommunikation in der Automation","citation":{"ama":"Flatt H, Jasperneite J, Rauchfuß J. Redundante Kommunikation in der Automation. ATP edition - Automatisierungstechnische Praxis. 2014;(10):32-40.","ieee":"H. Flatt, J. Jasperneite, and J. Rauchfuß, “Redundante Kommunikation in der Automation,” ATP edition - Automatisierungstechnische Praxis, no. 10, pp. 32–40, 2014.","van":"Flatt H, Jasperneite J, Rauchfuß J. Redundante Kommunikation in der Automation. ATP edition - Automatisierungstechnische Praxis. 2014;(10):32–40.","ufg":"Flatt, Holger et. al. (2014): Redundante Kommunikation in der Automation, in: ATP edition - Automatisierungstechnische Praxis (10), S. 32–40.","mla":"Flatt, Holger, et al. “Redundante Kommunikation in Der Automation.” ATP Edition - Automatisierungstechnische Praxis, no. 10, 2014, pp. 32–40.","havard":"H. Flatt, J. Jasperneite, J. Rauchfuß, Redundante Kommunikation in der Automation, ATP Edition - Automatisierungstechnische Praxis. (2014) 32–40.","bjps":"Flatt H, Jasperneite J and Rauchfuß J (2014) Redundante Kommunikation in Der Automation. ATP edition - Automatisierungstechnische Praxis 32–40.","apa":"Flatt, H., Jasperneite, J., & Rauchfuß, J. (2014). Redundante Kommunikation in der Automation. ATP Edition - Automatisierungstechnische Praxis, (10), 32–40.","chicago":"Flatt, Holger, Jürgen Jasperneite, and Joachim Rauchfuß. “Redundante Kommunikation in Der Automation.” ATP Edition - Automatisierungstechnische Praxis, no. 10 (2014): 32–40.","short":"H. Flatt, J. Jasperneite, J. Rauchfuß, ATP Edition - Automatisierungstechnische Praxis (2014) 32–40.","chicago-de":"Flatt, Holger, Jürgen Jasperneite und Joachim Rauchfuß. 2014. Redundante Kommunikation in der Automation. ATP edition - Automatisierungstechnische Praxis, Nr. 10: 32–40.","din1505-2-1":"Flatt, Holger ; Jasperneite, Jürgen ; Rauchfuß, Joachim: Redundante Kommunikation in der Automation. In: ATP edition - Automatisierungstechnische Praxis (2014), Nr. 10, S. 32–40"}},{"date_updated":"2023-03-15T13:49:54Z","user_id":"45673","type":"conference","date_created":"2021-01-27T10:20:18Z","language":[{"iso":"eng"}],"_id":"4568","citation":{"ama":"Jasperneite J. Spitzencluster its OWL - Industrie 4.0 mit Bodenhaftung. In: ; 2014.","van":"Jasperneite J. Spitzencluster its OWL - Industrie 4.0 mit Bodenhaftung. In 2014.","mla":"Jasperneite, Jürgen. Spitzencluster Its OWL - Industrie 4.0 Mit Bodenhaftung. 2014.","bjps":"Jasperneite J (2014) Spitzencluster Its OWL - Industrie 4.0 Mit Bodenhaftung.","havard":"J. Jasperneite, Spitzencluster its OWL - Industrie 4.0 mit Bodenhaftung, in: 2014.","ufg":"Jasperneite, Jürgen (2014): Spitzencluster its OWL - Industrie 4.0 mit Bodenhaftung, in: .","ieee":"J. Jasperneite, “Spitzencluster its OWL - Industrie 4.0 mit Bodenhaftung,” presented at the 2. Markt&Technik Summit Industrie 4.0 WEKA FACHMEDIEN, München, 2014.","apa":"Jasperneite, J. (2014). Spitzencluster its OWL - Industrie 4.0 mit Bodenhaftung. Presented at the 2. Markt&Technik Summit Industrie 4.0 WEKA FACHMEDIEN, München.","chicago":"Jasperneite, Jürgen. “Spitzencluster Its OWL - Industrie 4.0 Mit Bodenhaftung,” 2014.","short":"J. Jasperneite, in: 2014.","din1505-2-1":"Jasperneite, Jürgen: Spitzencluster its OWL - Industrie 4.0 mit Bodenhaftung. In: , 2014","chicago-de":"Jasperneite, Jürgen. 2014. Spitzencluster its OWL - Industrie 4.0 mit Bodenhaftung. In: ."},"title":"Spitzencluster its OWL - Industrie 4.0 mit Bodenhaftung","status":"public","conference":{"name":"2. Markt&Technik Summit Industrie 4.0 WEKA FACHMEDIEN","location":"München"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2014,"author":[{"full_name":"Jasperneite, Jürgen","first_name":"Jürgen","id":"1899","last_name":"Jasperneite"}]},{"_id":"4569","place":"München","language":[{"iso":"eng"}],"intvolume":" 56","user_id":"45673","date_updated":"2023-03-15T13:49:54Z","publication":"ATP edition - Automatisierungstechnische Praxis","date_created":"2021-01-27T10:22:20Z","type":"journal_article","publisher":"DIV Vulkan-Verlag","status":"public","issue":"10","year":2014,"author":[{"last_name":"Flatt","id":"58494","full_name":"Flatt, Holger","first_name":"Holger"},{"full_name":"Jasperneite, Jürgen","first_name":"Jürgen","last_name":"Jasperneite","id":"1899"},{"last_name":"Rauchfuß","first_name":"Joachim","full_name":"Rauchfuß, Joachim"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"citation":{"ieee":"H. Flatt, J. Jasperneite, and J. Rauchfuß, “Hochverfügbare Kommunikation für die industrielle Automation,” ATP edition - Automatisierungstechnische Praxis, vol. 56, no. 10, 2014.","apa":"Flatt, H., Jasperneite, J., & Rauchfuß, J. (2014). Hochverfügbare Kommunikation für die industrielle Automation. ATP Edition - Automatisierungstechnische Praxis, 56(10).","chicago":"Flatt, Holger, Jürgen Jasperneite, and Joachim Rauchfuß. “Hochverfügbare Kommunikation Für Die Industrielle Automation.” ATP Edition - Automatisierungstechnische Praxis 56, no. 10 (2014).","ama":"Flatt H, Jasperneite J, Rauchfuß J. Hochverfügbare Kommunikation für die industrielle Automation. ATP edition - Automatisierungstechnische Praxis. 2014;56(10).","van":"Flatt H, Jasperneite J, Rauchfuß J. Hochverfügbare Kommunikation für die industrielle Automation. ATP edition - Automatisierungstechnische Praxis. 2014;56(10).","havard":"H. Flatt, J. Jasperneite, J. Rauchfuß, Hochverfügbare Kommunikation für die industrielle Automation, ATP Edition - Automatisierungstechnische Praxis. 56 (2014).","mla":"Flatt, Holger, et al. “Hochverfügbare Kommunikation Für Die Industrielle Automation.” ATP Edition - Automatisierungstechnische Praxis, vol. 56, no. 10, DIV Vulkan-Verlag, 2014.","bjps":"Flatt H, Jasperneite J and Rauchfuß J (2014) Hochverfügbare Kommunikation Für Die Industrielle Automation. ATP edition - Automatisierungstechnische Praxis 56.","ufg":"Flatt, Holger et. al. (2014): Hochverfügbare Kommunikation für die industrielle Automation, in: ATP edition - Automatisierungstechnische Praxis 56 (10).","short":"H. Flatt, J. Jasperneite, J. Rauchfuß, ATP Edition - Automatisierungstechnische Praxis 56 (2014).","din1505-2-1":"Flatt, Holger ; Jasperneite, Jürgen ; Rauchfuß, Joachim: Hochverfügbare Kommunikation für die industrielle Automation. In: ATP edition - Automatisierungstechnische Praxis Bd. 56. München, DIV Vulkan-Verlag (2014), Nr. 10","chicago-de":"Flatt, Holger, Jürgen Jasperneite und Joachim Rauchfuß. 2014. Hochverfügbare Kommunikation für die industrielle Automation. ATP edition - Automatisierungstechnische Praxis 56, Nr. 10."},"volume":56,"title":"Hochverfügbare Kommunikation für die industrielle Automation"},{"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"name":"FUTURE MACHINERY 2014 Industrie 4.0 – Zukunftsfähige Maschinenentwicklung ","location":"Karlsruhe"},"author":[{"id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"}],"year":2014,"status":"public","title":"Industrie 4.0 – Bedeutung und Konsequenz für den Maschinenbau","citation":{"ama":"Jasperneite J. Industrie 4.0 – Bedeutung und Konsequenz für den Maschinenbau. In: ; 2014.","ieee":"J. Jasperneite, “Industrie 4.0 – Bedeutung und Konsequenz für den Maschinenbau,” presented at the FUTURE MACHINERY 2014 Industrie 4.0 – Zukunftsfähige Maschinenentwicklung , Karlsruhe, 2014.","chicago-de":"Jasperneite, Jürgen. 2014. Industrie 4.0 – Bedeutung und Konsequenz für den Maschinenbau. In: .","din1505-2-1":"Jasperneite, Jürgen: Industrie 4.0 – Bedeutung und Konsequenz für den Maschinenbau. In: , 2014","short":"J. Jasperneite, in: 2014.","ufg":"Jasperneite, Jürgen (2014): Industrie 4.0 – Bedeutung und Konsequenz für den Maschinenbau, in: .","bjps":"Jasperneite J (2014) Industrie 4.0 – Bedeutung Und Konsequenz Für Den Maschinenbau.","havard":"J. Jasperneite, Industrie 4.0 – Bedeutung und Konsequenz für den Maschinenbau, in: 2014.","mla":"Jasperneite, Jürgen. Industrie 4.0 – Bedeutung Und Konsequenz Für Den Maschinenbau. 2014.","van":"Jasperneite J. Industrie 4.0 – Bedeutung und Konsequenz für den Maschinenbau. In 2014.","chicago":"Jasperneite, Jürgen. “Industrie 4.0 – Bedeutung Und Konsequenz Für Den Maschinenbau,” 2014.","apa":"Jasperneite, J. (2014). Industrie 4.0 – Bedeutung und Konsequenz für den Maschinenbau. Presented at the FUTURE MACHINERY 2014 Industrie 4.0 – Zukunftsfähige Maschinenentwicklung , Karlsruhe."},"_id":"4570","language":[{"iso":"eng"}],"type":"conference","date_created":"2021-01-27T10:23:37Z","date_updated":"2023-03-15T13:49:54Z","user_id":"45673"},{"_id":"4571","language":[{"iso":"eng"}],"date_updated":"2023-03-15T13:49:54Z","user_id":"45673","type":"conference","date_created":"2021-01-27T10:25:28Z","status":"public","conference":{"location":"Lemgo","name":"KommA 2014 – Jahreskolloquium Kommunikation in der Automation "},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2014,"author":[{"first_name":"Sebastian","full_name":"Faltinski, Sebastian","last_name":"Faltinski"},{"first_name":"Dominik","full_name":"Henneke, Dominik","last_name":"Henneke","id":"52007"},{"last_name":"Jasperneite","first_name":"Jürgen","id":"1899","full_name":"Jasperneite, Jürgen"}],"citation":{"ieee":"S. Faltinski, D. Henneke, and J. Jasperneite, “M2M-Kommunikation mit Hilfe von RF-ID und einem digitalen Produktgedächtnis,” presented at the KommA 2014 – Jahreskolloquium Kommunikation in der Automation , Lemgo, 2014.","ama":"Faltinski S, Henneke D, Jasperneite J. M2M-Kommunikation mit Hilfe von RF-ID und einem digitalen Produktgedächtnis. In: ; 2014.","short":"S. Faltinski, D. Henneke, J. Jasperneite, in: 2014.","din1505-2-1":"Faltinski, Sebastian ; Henneke, Dominik ; Jasperneite, Jürgen: M2M-Kommunikation mit Hilfe von RF-ID und einem digitalen Produktgedächtnis. In: , 2014","chicago-de":"Faltinski, Sebastian, Dominik Henneke und Jürgen Jasperneite. 2014. M2M-Kommunikation mit Hilfe von RF-ID und einem digitalen Produktgedächtnis. In: .","apa":"Faltinski, S., Henneke, D., & Jasperneite, J. (2014). M2M-Kommunikation mit Hilfe von RF-ID und einem digitalen Produktgedächtnis. Presented at the KommA 2014 – Jahreskolloquium Kommunikation in der Automation , Lemgo.","chicago":"Faltinski, Sebastian, Dominik Henneke, and Jürgen Jasperneite. “M2M-Kommunikation Mit Hilfe von RF-ID Und Einem Digitalen Produktgedächtnis,” 2014.","van":"Faltinski S, Henneke D, Jasperneite J. M2M-Kommunikation mit Hilfe von RF-ID und einem digitalen Produktgedächtnis. In 2014.","ufg":"Faltinski, Sebastian et. al. (2014): M2M-Kommunikation mit Hilfe von RF-ID und einem digitalen Produktgedächtnis, in: .","mla":"Faltinski, Sebastian, et al. M2M-Kommunikation Mit Hilfe von RF-ID Und Einem Digitalen Produktgedächtnis. 2014.","bjps":"Faltinski S, Henneke D and Jasperneite J (2014) M2M-Kommunikation Mit Hilfe von RF-ID Und Einem Digitalen Produktgedächtnis.","havard":"S. Faltinski, D. Henneke, J. Jasperneite, M2M-Kommunikation mit Hilfe von RF-ID und einem digitalen Produktgedächtnis, in: 2014."},"title":"M2M-Kommunikation mit Hilfe von RF-ID und einem digitalen Produktgedächtnis"},{"_id":"4572","language":[{"iso":"eng"}],"type":"conference","date_created":"2021-01-27T10:28:16Z","user_id":"45673","date_updated":"2023-03-15T13:49:54Z","year":2014,"author":[{"full_name":"Ott, Hans-Peter","first_name":"Hans-Peter","last_name":"Ott"},{"full_name":"Joest, Stephan","first_name":"Stephan","last_name":"Joest"},{"full_name":"Dürkop, Lars","last_name":"Dürkop","first_name":"Lars"},{"first_name":"Jürgen","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","id":"1899"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"name":"KommA 2014 – Jahreskolloquium Kommunikation in der Automation","location":"Lemgo"},"status":"public","title":"Communication design considerations for M2M applications","citation":{"chicago-de":"Ott, Hans-Peter, Stephan Joest, Lars Dürkop und Jürgen Jasperneite. 2014. Communication design considerations for M2M applications. In: .","din1505-2-1":"Ott, Hans-Peter ; Joest, Stephan ; Dürkop, Lars ; Jasperneite, Jürgen: Communication design considerations for M2M applications. In: , 2014","short":"H.-P. Ott, S. Joest, L. Dürkop, J. Jasperneite, in: 2014.","havard":"H.-P. Ott, S. Joest, L. Dürkop, J. Jasperneite, Communication design considerations for M2M applications, in: 2014.","mla":"Ott, Hans-Peter, et al. Communication Design Considerations for M2M Applications. 2014.","bjps":"Ott H-P et al. (2014) Communication Design Considerations for M2M Applications.","ufg":"Ott, Hans-Peter et. al. (2014): Communication design considerations for M2M applications, in: .","ama":"Ott H-P, Joest S, Dürkop L, Jasperneite J. Communication design considerations for M2M applications. In: ; 2014.","van":"Ott H-P, Joest S, Dürkop L, Jasperneite J. Communication design considerations for M2M applications. In 2014.","chicago":"Ott, Hans-Peter, Stephan Joest, Lars Dürkop, and Jürgen Jasperneite. “Communication Design Considerations for M2M Applications,” 2014.","ieee":"H.-P. Ott, S. Joest, L. Dürkop, and J. Jasperneite, “Communication design considerations for M2M applications,” presented at the KommA 2014 – Jahreskolloquium Kommunikation in der Automation, Lemgo, 2014.","apa":"Ott, H.-P., Joest, S., Dürkop, L., & Jasperneite, J. (2014). Communication design considerations for M2M applications. Presented at the KommA 2014 – Jahreskolloquium Kommunikation in der Automation, Lemgo."}},{"conference":{"name":"Echtzeit 2014 - Industrie 4.0 und Echtzeit GI/VDE/VDI Fachausschuss Echtzeitsysteme","location":"Boppard"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"full_name":"Schriegel, Sebastian","last_name":"Schriegel","first_name":"Sebastian"},{"last_name":"Niggemann","first_name":"Oliver","full_name":"Niggemann, Oliver","id":"10876"},{"last_name":"Jasperneite","first_name":"Jürgen","full_name":"Jasperneite, Jürgen","id":"1899"}],"year":2014,"status":"public","title":"Plug-and-Work für verteilte Echtzeitsysteme mit Zeitsynchronisation","citation":{"ufg":"Schriegel, Sebastian et. al. (2014): Plug-and-Work für verteilte Echtzeitsysteme mit Zeitsynchronisation, in: .","havard":"S. Schriegel, O. Niggemann, J. Jasperneite, Plug-and-Work für verteilte Echtzeitsysteme mit Zeitsynchronisation, in: 2014.","mla":"Schriegel, Sebastian, et al. Plug-and-Work Für Verteilte Echtzeitsysteme Mit Zeitsynchronisation. 2014.","bjps":"Schriegel S, Niggemann O and Jasperneite J (2014) Plug-and-Work Für Verteilte Echtzeitsysteme Mit Zeitsynchronisation.","van":"Schriegel S, Niggemann O, Jasperneite J. Plug-and-Work für verteilte Echtzeitsysteme mit Zeitsynchronisation. In 2014.","ama":"Schriegel S, Niggemann O, Jasperneite J. Plug-and-Work für verteilte Echtzeitsysteme mit Zeitsynchronisation. In: ; 2014.","chicago":"Schriegel, Sebastian, Oliver Niggemann, and Jürgen Jasperneite. “Plug-and-Work Für Verteilte Echtzeitsysteme Mit Zeitsynchronisation,” 2014.","apa":"Schriegel, S., Niggemann, O., & Jasperneite, J. (2014). Plug-and-Work für verteilte Echtzeitsysteme mit Zeitsynchronisation. Presented at the Echtzeit 2014 - Industrie 4.0 und Echtzeit GI/VDE/VDI Fachausschuss Echtzeitsysteme, Boppard.","ieee":"S. Schriegel, O. Niggemann, and J. Jasperneite, “Plug-and-Work für verteilte Echtzeitsysteme mit Zeitsynchronisation,” presented at the Echtzeit 2014 - Industrie 4.0 und Echtzeit GI/VDE/VDI Fachausschuss Echtzeitsysteme, Boppard, 2014.","chicago-de":"Schriegel, Sebastian, Oliver Niggemann und Jürgen Jasperneite. 2014. Plug-and-Work für verteilte Echtzeitsysteme mit Zeitsynchronisation. In: .","din1505-2-1":"Schriegel, Sebastian ; Niggemann, Oliver ; Jasperneite, Jürgen: Plug-and-Work für verteilte Echtzeitsysteme mit Zeitsynchronisation. In: , 2014","short":"S. Schriegel, O. Niggemann, J. Jasperneite, in: 2014."},"language":[{"iso":"eng"}],"_id":"4573","date_created":"2021-01-27T10:42:27Z","type":"conference","date_updated":"2023-03-15T13:49:54Z","user_id":"45673"},{"_id":"4574","language":[{"iso":"eng"}],"type":"conference","date_created":"2021-01-27T10:44:11Z","date_updated":"2023-03-15T13:49:54Z","user_id":"45673","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"name":"International Conference on ReConFigurable Computing and FPGAs (ReConFig 2014) ","location":"Cancun, Mexico"},"year":2014,"author":[{"first_name":"Daniel","last_name":"Kirschberger","full_name":"Kirschberger, Daniel"},{"last_name":"Flatt","id":"58494","first_name":"Holger","full_name":"Flatt, Holger"},{"full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","id":"1899","first_name":"Jürgen"}],"status":"public","title":"Architectural Approach for Reconfigurable Industrial I/O Devices","citation":{"chicago":"Kirschberger, Daniel, Holger Flatt, and Jürgen Jasperneite. “Architectural Approach for Reconfigurable Industrial I/O Devices,” 2014.","ieee":"D. Kirschberger, H. Flatt, and J. Jasperneite, “Architectural Approach for Reconfigurable Industrial I/O Devices,” presented at the International Conference on ReConFigurable Computing and FPGAs (ReConFig 2014) , Cancun, Mexico, 2014.","apa":"Kirschberger, D., Flatt, H., & Jasperneite, J. (2014). Architectural Approach for Reconfigurable Industrial I/O Devices. Presented at the International Conference on ReConFigurable Computing and FPGAs (ReConFig 2014) , Cancun, Mexico.","havard":"D. Kirschberger, H. Flatt, J. Jasperneite, Architectural Approach for Reconfigurable Industrial I/O Devices, in: 2014.","mla":"Kirschberger, Daniel, et al. Architectural Approach for Reconfigurable Industrial I/O Devices. 2014.","bjps":"Kirschberger D, Flatt H and Jasperneite J (2014) Architectural Approach for Reconfigurable Industrial I/O Devices.","ufg":"Kirschberger, Daniel et. al. (2014): Architectural Approach for Reconfigurable Industrial I/O Devices, in: .","ama":"Kirschberger D, Flatt H, Jasperneite J. Architectural Approach for Reconfigurable Industrial I/O Devices. In: ; 2014.","van":"Kirschberger D, Flatt H, Jasperneite J. Architectural Approach for Reconfigurable Industrial I/O Devices. In 2014.","din1505-2-1":"Kirschberger, Daniel ; Flatt, Holger ; Jasperneite, Jürgen: Architectural Approach for Reconfigurable Industrial I/O Devices. In: , 2014","chicago-de":"Kirschberger, Daniel, Holger Flatt und Jürgen Jasperneite. 2014. Architectural Approach for Reconfigurable Industrial I/O Devices. In: .","short":"D. Kirschberger, H. Flatt, J. Jasperneite, in: 2014."}},{"date_updated":"2023-03-15T13:49:54Z","user_id":"45673","date_created":"2021-01-27T10:48:20Z","type":"conference","_id":"4575","language":[{"iso":"eng"}],"citation":{"ieee":"M. Runde et al., “SEC_PRO : sichere Produktion mit verteilten Automatisierungssystemen,” Lemgo, 2014.","apa":"Runde, M., Hausmann, S., Tebbe, C., Czybik, B., Niemann, K.-H., Heiss, S., & Jasperneite, J. (2014). SEC_PRO : sichere Produktion mit verteilten Automatisierungssystemen. Lemgo.","chicago":"Runde, Markus, Stefan Hausmann, Christopher Tebbe, Björn Czybik, Karl-Heinz Niemann, Stefan Heiss, and Jürgen Jasperneite. “SEC_PRO : Sichere Produktion Mit Verteilten Automatisierungssystemen,” 2014.","ama":"Runde M, Hausmann S, Tebbe C, et al. SEC_PRO : sichere Produktion mit verteilten Automatisierungssystemen. In: ; 2014.","van":"Runde M, Hausmann S, Tebbe C, Czybik B, Niemann K-H, Heiss S, et al. SEC_PRO : sichere Produktion mit verteilten Automatisierungssystemen. In 2014.","mla":"Runde, Markus, et al. SEC_PRO : Sichere Produktion Mit Verteilten Automatisierungssystemen. 2014.","havard":"M. Runde, S. Hausmann, C. Tebbe, B. Czybik, K.-H. Niemann, S. Heiss, J. Jasperneite, SEC_PRO : sichere Produktion mit verteilten Automatisierungssystemen, in: 2014.","bjps":"Runde M et al. (2014) SEC_PRO : Sichere Produktion Mit Verteilten Automatisierungssystemen.","ufg":"Runde, Markus et. al. (2014): SEC_PRO : sichere Produktion mit verteilten Automatisierungssystemen, in: .","short":"M. Runde, S. Hausmann, C. Tebbe, B. Czybik, K.-H. Niemann, S. Heiss, J. Jasperneite, in: 2014.","chicago-de":"Runde, Markus, Stefan Hausmann, Christopher Tebbe, Björn Czybik, Karl-Heinz Niemann, Stefan Heiss und Jürgen Jasperneite. 2014. SEC_PRO : sichere Produktion mit verteilten Automatisierungssystemen. In: .","din1505-2-1":"Runde, Markus ; Hausmann, Stefan ; Tebbe, Christopher ; Czybik, Björn ; Niemann, Karl-Heinz ; Heiss, Stefan ; Jasperneite, Jürgen: SEC_PRO : sichere Produktion mit verteilten Automatisierungssystemen. In: , 2014"},"title":"SEC_PRO : sichere Produktion mit verteilten Automatisierungssystemen","status":"public","conference":{"location":"Lemgo"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2014,"author":[{"first_name":"Markus","last_name":"Runde","full_name":"Runde, Markus"},{"full_name":"Hausmann, Stefan","first_name":"Stefan","last_name":"Hausmann"},{"first_name":"Christopher","last_name":"Tebbe","full_name":"Tebbe, Christopher"},{"full_name":"Czybik, Björn","first_name":"Björn","last_name":"Czybik","id":"76180"},{"first_name":"Karl-Heinz","last_name":"Niemann","full_name":"Niemann, Karl-Heinz"},{"last_name":"Heiss","first_name":"Stefan","full_name":"Heiss, Stefan","id":"1031"},{"last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","id":"1899","first_name":"Jürgen"}]},{"_id":"9135","doi":"https://doi.org/10.15488/5457","place":"Berlin","user_id":"15514","type":"conference_editor_article","publisher":"VDE-Verlag","abstract":[{"lang":"eng","text":"In diesem Beitrag wird die Konstruktion einer IEC62578 ed. 2 konformen Netznachbildung für die Messung der leitungsgeführten Störaussendung von Active Infeed Convertern zwischen 2 und 9 kHz beschrieben. Die Auswirkungen durch Streuung von Bauteilwerten konnte durch Simulationen als unkritisch beurteilt werden. Durch gezielte Anpassung von Parametern konnte die Entkopplung von der lokalen Netzimpedanz verbessert und der zu betrachtende Frequenzbereich an die geforderten Grenzen angepasst werden. Nach der Montage der Netznachbildung belegten Messungen am realen Netz die Funktion. Um Erfahrung mit der Netznachbildung zu gewinnen, sollen im Lauf des Jahres 2014 in Kooperation mit Industriefirmen verschiedene AIC vermessen werden, um weitere Erfahrung zu gewinnen."}],"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"conference":{"name":"Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit (EMV)","location":"Düsseldorf","start_date":"2014-03-11","end_date":"2014-03-13"},"publication_status":"published","language":[{"iso":"eng"}],"oa":"1","editor":[{"full_name":"Garbe, Heyno","last_name":"Garbe","first_name":"Heyno"}],"date_updated":"2023-03-15T13:50:17Z","publication":" Elektromagnetische Verträglichkeit emv : Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit. Düsseldorf, 11.-13.03.2014.","date_created":"2022-07-05T08:25:45Z","status":"public","page":" 645-653","year":2014,"main_file_link":[{"url":"https://www.repo.uni-hannover.de/bitstream/handle/123456789/12661/1c_1_Borcherding_Holger.pdf?sequence=1","open_access":"1"}],"author":[{"first_name":"Artur","full_name":"Mambetow, Artur","last_name":"Mambetow","id":"51936"},{"last_name":"Borcherding","full_name":"Borcherding, Holger","first_name":"Holger","id":"1693"}],"citation":{"chicago":"Mambetow, Artur, and Holger Borcherding. Erstellung Einer IEC 62578 Konformen Netznachbildung Und Erfahrung in Der Auslegung Und Anwendung. Edited by Heyno Garbe. Elektromagnetische Verträglichkeit Emv : Internationale Fachmesse Und Kongress Für Elektromagnetische Verträglichkeit. Düsseldorf, 11.-13.03.2014. Berlin: VDE-Verlag, 2014. https://doi.org/10.15488/5457.","apa":"Mambetow, A., & Borcherding, H. (2014). Erstellung einer IEC 62578 konformen Netznachbildung und Erfahrung in der Auslegung und Anwendung. (H. Garbe, Ed.), Elektromagnetische Verträglichkeit emv : Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit. Düsseldorf, 11.-13.03.2014. (pp. 645–653). Berlin: VDE-Verlag. https://doi.org/10.15488/5457","mla":"Mambetow, Artur, and Holger Borcherding. “Erstellung Einer IEC 62578 Konformen Netznachbildung Und Erfahrung in Der Auslegung Und Anwendung.” Elektromagnetische Verträglichkeit Emv : Internationale Fachmesse Und Kongress Für Elektromagnetische Verträglichkeit. Düsseldorf, 11.-13.03.2014., edited by Heyno Garbe, VDE-Verlag, 2014, pp. 645–53, doi:https://doi.org/10.15488/5457.","havard":"A. Mambetow, H. Borcherding, Erstellung einer IEC 62578 konformen Netznachbildung und Erfahrung in der Auslegung und Anwendung, VDE-Verlag, Berlin, 2014.","bjps":"Mambetow A and Borcherding H (2014) Erstellung Einer IEC 62578 Konformen Netznachbildung Und Erfahrung in Der Auslegung Und Anwendung, Garbe H (ed.). Berlin: VDE-Verlag.","ufg":"Mambetow, Artur/Borcherding, Holger (2014): Erstellung einer IEC 62578 konformen Netznachbildung und Erfahrung in der Auslegung und Anwendung, Berlin.","van":"Mambetow A, Borcherding H. Erstellung einer IEC 62578 konformen Netznachbildung und Erfahrung in der Auslegung und Anwendung. Garbe H, editor. Elektromagnetische Verträglichkeit emv : Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit. Düsseldorf, 11.-13.03.2014. Berlin: VDE-Verlag; 2014.","chicago-de":"Mambetow, Artur und Holger Borcherding. 2014. Erstellung einer IEC 62578 konformen Netznachbildung und Erfahrung in der Auslegung und Anwendung. Hg. von Heyno Garbe. Elektromagnetische Verträglichkeit emv : Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit. Düsseldorf, 11.-13.03.2014. Berlin: VDE-Verlag. doi:https://doi.org/10.15488/5457, .","din1505-2-1":"Mambetow, Artur ; Borcherding, Holger ; Garbe, H. (Hrsg.): Erstellung einer IEC 62578 konformen Netznachbildung und Erfahrung in der Auslegung und Anwendung. Berlin : VDE-Verlag, 2014","short":"A. Mambetow, H. Borcherding, Erstellung Einer IEC 62578 Konformen Netznachbildung Und Erfahrung in Der Auslegung Und Anwendung, VDE-Verlag, Berlin, 2014.","ieee":"A. Mambetow and H. Borcherding, Erstellung einer IEC 62578 konformen Netznachbildung und Erfahrung in der Auslegung und Anwendung. Berlin: VDE-Verlag, 2014, pp. 645–653.","ama":"Mambetow A, Borcherding H. Erstellung Einer IEC 62578 Konformen Netznachbildung Und Erfahrung in Der Auslegung Und Anwendung. (Garbe H, ed.). Berlin: VDE-Verlag; 2014:645-653. doi:https://doi.org/10.15488/5457"},"title":"Erstellung einer IEC 62578 konformen Netznachbildung und Erfahrung in der Auslegung und Anwendung"},{"type":"journal_article","date_created":"2020-09-02T08:16:46Z","publication_identifier":{"issn":["1866-5195 "],"eissn":["0723-1520"]},"publication":"BrewingScience","date_updated":"2023-03-15T13:49:46Z","user_id":"13209","intvolume":" 67","oa":"1","language":[{"iso":"eng"}],"_id":"3399","title":"Effect of Residence Time Distribution in Flash Pasteurizers on the Thermal Death of Microorganisms","publication_status":"published","citation":{"short":"A. Dammann, K. Schwarzer, P. Neubauer, J. Schneider, BrewingScience 67 (2014) 101–107.","chicago-de":"Dammann, Anna, Knut Schwarzer, Peter Neubauer und Jan Schneider. 2014. Effect of Residence Time Distribution in Flash Pasteurizers on the Thermal Death of Microorganisms. BrewingScience 67, Nr. 7: 101–107.","din1505-2-1":"Dammann, Anna ; Schwarzer, Knut ; Neubauer, Peter ; Schneider, Jan: Effect of Residence Time Distribution in Flash Pasteurizers on the Thermal Death of Microorganisms. In: BrewingScience Bd. 67, Carl (2014), Nr. 7, S. 101–107","van":"Dammann A, Schwarzer K, Neubauer P, Schneider J. Effect of Residence Time Distribution in Flash Pasteurizers on the Thermal Death of Microorganisms. BrewingScience. 2014;67(7):101–7.","bjps":"Dammann A et al. (2014) Effect of Residence Time Distribution in Flash Pasteurizers on the Thermal Death of Microorganisms. BrewingScience 67, 101–107.","mla":"Dammann, Anna, et al. “Effect of Residence Time Distribution in Flash Pasteurizers on the Thermal Death of Microorganisms.” BrewingScience, vol. 67, no. 7, 2014, pp. 101–07.","havard":"A. Dammann, K. Schwarzer, P. Neubauer, J. Schneider, Effect of Residence Time Distribution in Flash Pasteurizers on the Thermal Death of Microorganisms, BrewingScience. 67 (2014) 101–107.","ufg":"Dammann, Anna u. a.: Effect of Residence Time Distribution in Flash Pasteurizers on the Thermal Death of Microorganisms, in: BrewingScience 67 (2014), H. 7, S. 101–107.","apa":"Dammann, A., Schwarzer, K., Neubauer, P., & Schneider, J. (2014). Effect of Residence Time Distribution in Flash Pasteurizers on the Thermal Death of Microorganisms. BrewingScience, 67(7), 101–107.","chicago":"Dammann, Anna, Knut Schwarzer, Peter Neubauer, and Jan Schneider. “Effect of Residence Time Distribution in Flash Pasteurizers on the Thermal Death of Microorganisms.” BrewingScience 67, no. 7 (2014): 101–7.","ama":"Dammann A, Schwarzer K, Neubauer P, Schneider J. Effect of Residence Time Distribution in Flash Pasteurizers on the Thermal Death of Microorganisms. BrewingScience. 2014;67(7):101-107.","ieee":"A. Dammann, K. Schwarzer, P. Neubauer, and J. Schneider, “Effect of Residence Time Distribution in Flash Pasteurizers on the Thermal Death of Microorganisms,” BrewingScience, vol. 67, no. 7, pp. 101–107, 2014."},"volume":67,"department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"main_file_link":[{"open_access":"1","url":"https://www.researchgate.net/publication/303758405_Effect_of_residence_time_distribution_in_flash_pasteurizers_on_the_thermal_death_of_microorganisms"}],"author":[{"last_name":"Dammann","full_name":"Dammann, Anna","first_name":"Anna"},{"id":"13329","full_name":"Schwarzer, Knut","last_name":"Schwarzer","first_name":"Knut"},{"first_name":"Peter","last_name":"Neubauer","full_name":"Neubauer, Peter"},{"first_name":"Jan","full_name":"Schneider, Jan","last_name":"Schneider","id":"13209","orcid":"0000-0001-6401-8873"}],"year":2014,"issue":"7","page":"101-107","status":"public","publisher":"Carl"},{"date_updated":"2023-03-15T13:50:00Z","user_id":"15514","type":"book","date_created":"2021-04-19T09:28:14Z","doi":"https://doi.org/10.25968/opus-499","_id":"5601","language":[{"iso":"ger"}],"place":"Hannover ","keyword":["Automatisierungstechnik","IT-Sicherheit","PROFINET","SEC_PRO IT Security"],"publication_status":"published","citation":{"ama":"Runde M, Hausmann S, Tebbe C, et al. SEC_PRO : sichere Produktion mit verteilten Automatisierungssystemen. Hannover : Hochschule Hannover ; 2014. doi:https://doi.org/10.25968/opus-499","ieee":"M. Runde et al., SEC_PRO : sichere Produktion mit verteilten Automatisierungssystemen. Hannover : Hochschule Hannover , 2014.","short":"M. Runde, S. Hausmann, C. Tebbe, B. Czybik, K.-H. Niemann, S. Heiss, J. Jasperneite, SEC_PRO : sichere Produktion mit verteilten Automatisierungssystemen, Hochschule Hannover , Hannover , 2014.","chicago-de":"Runde, Markus, Stefan Hausmann, Christopher Tebbe, Björn Czybik, Karl-Heinz Niemann, Stefan Heiss und Jürgen Jasperneite. 2014. SEC_PRO : sichere Produktion mit verteilten Automatisierungssystemen. Hannover : Hochschule Hannover . doi:https://doi.org/10.25968/opus-499, .","din1505-2-1":"Runde, Markus ; Hausmann, Stefan ; Tebbe, Christopher ; Czybik, Björn ; Niemann, Karl-Heinz ; Heiss, Stefan ; Jasperneite, Jürgen: SEC_PRO : sichere Produktion mit verteilten Automatisierungssystemen. Hannover : Hochschule Hannover , 2014","van":"Runde M, Hausmann S, Tebbe C, Czybik B, Niemann K-H, Heiss S, et al. SEC_PRO : sichere Produktion mit verteilten Automatisierungssystemen. Hannover : Hochschule Hannover ; 2014. 99 p.","mla":"Runde, Markus, et al. SEC_PRO : sichere Produktion mit verteilten Automatisierungssystemen. Hochschule Hannover , 2014, doi:https://doi.org/10.25968/opus-499.","havard":"M. Runde, S. Hausmann, C. Tebbe, B. Czybik, K.-H. Niemann, S. Heiss, J. Jasperneite, SEC_PRO : sichere Produktion mit verteilten Automatisierungssystemen, Hochschule Hannover , Hannover , 2014.","bjps":"Runde M et al. (2014) SEC_PRO : sichere Produktion mit verteilten Automatisierungssystemen. Hannover : Hochschule Hannover .","ufg":"Runde, Markus et. al. (2014): SEC_PRO : sichere Produktion mit verteilten Automatisierungssystemen, Hannover .","apa":"Runde, M., Hausmann, S., Tebbe, C., Czybik, B., Niemann, K.-H., Heiss, S., & Jasperneite, J. (2014). SEC_PRO : sichere Produktion mit verteilten Automatisierungssystemen. Hannover : Hochschule Hannover . https://doi.org/10.25968/opus-499","chicago":"Runde, Markus, Stefan Hausmann, Christopher Tebbe, Björn Czybik, Karl-Heinz Niemann, Stefan Heiss, and Jürgen Jasperneite. SEC_PRO : sichere Produktion mit verteilten Automatisierungssystemen. Hannover : Hochschule Hannover , 2014. https://doi.org/10.25968/opus-499."},"title":"SEC_PRO : sichere Produktion mit verteilten Automatisierungssystemen","publisher":"Hochschule Hannover ","page":"99","status":"public","abstract":[{"text":"Das Projekt SEC_PRO verfolgte die Möglichkeit der Erarbeitung einer neuartigen IT-Sicherheitslösung für Automatisierungssysteme. Die Ermittlung des Stands der Technik zeigte, dass die IT-Sicherheit in der Automatisierungstechnik von Lösungen der Standard-IT in Büronetzwerken geprägt ist, ohne auf spezielle Anforderungen der Automatisierungstechnik einzugehen. Eine Anforderungsanalyse erbrachte, dass IT-Sicherheitslösungen benötigt werden, die sich mit dem zunehmenden Vernetzungsgrad von Automatisierungssystemen in Einklang bringen lassen. Dazu ist eine IT-Sicherheitsschicht für das PROFINET-Protokoll konzipiert und implementiert worden, die einen integrierten Schutz der Kommunikation und der Komponenten selbst ermöglicht. Dabei kommen gezielt Security Token Technologien zum Einsatz. Eine Evaluierung der kryptografischen Funktionen zeigte, dass deren Verwendung unter gewissen Voraussetzungen möglich ist. Mit Hilfe eines Demonstrators ist konnte die Echtzeitfähigkeit der IT-Sicherheitsschicht validiert und dessen Schutzwirkung nachgewiesen werden. SEC_PRO kann als Ausgangspunkt für weitere Vorhaben bezüglich integrierter IT-Sicherheitsmaßnahmen gesehen werden, die auf eine Anwendung der Kryptografie in der Automatisierungstechnik abzielen.","lang":"ger"}],"department":[{"_id":"DEP5000"},{"_id":"DEP5023"}],"author":[{"full_name":"Runde, Markus","first_name":"Markus","last_name":"Runde"},{"last_name":"Hausmann","full_name":"Hausmann, Stefan","first_name":"Stefan"},{"full_name":"Tebbe, Christopher","last_name":"Tebbe","first_name":"Christopher"},{"id":"76180","last_name":"Czybik","full_name":"Czybik, Björn","first_name":"Björn"},{"first_name":"Karl-Heinz","full_name":"Niemann, Karl-Heinz","last_name":"Niemann"},{"last_name":"Heiss","full_name":"Heiss, Stefan","id":"1031","first_name":"Stefan"},{"first_name":"Jürgen","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","id":"1899"}],"year":2014},{"date_created":"2021-04-19T09:34:06Z","type":"conference","publication":"KommA","date_updated":"2023-03-15T13:50:00Z","user_id":"10982","language":[{"iso":"eng"}],"_id":"5602","title":"OPC-UA: Ein kritischer Vergleich der IT-Sicherheitsoptionen.","citation":{"din1505-2-1":"Gallinat, Melanie ; Hausmann, Stefan ; Köster, Markus ; Heiss, Stefan: OPC-UA: Ein kritischer Vergleich der IT-Sicherheitsoptionen. In: KommA, 2014","chicago-de":"Gallinat, Melanie, Stefan Hausmann, Markus Köster und Stefan Heiss. 2014. OPC-UA: Ein kritischer Vergleich der IT-Sicherheitsoptionen. In: KommA.","short":"M. Gallinat, S. Hausmann, M. Köster, S. Heiss, in: KommA, 2014.","chicago":"Gallinat, Melanie, Stefan Hausmann, Markus Köster, and Stefan Heiss. “OPC-UA: Ein Kritischer Vergleich Der IT-Sicherheitsoptionen.” In KommA, 2014.","ieee":"M. Gallinat, S. Hausmann, M. Köster, and S. Heiss, “OPC-UA: Ein kritischer Vergleich der IT-Sicherheitsoptionen.,” in KommA, 2014.","apa":"Gallinat, M., Hausmann, S., Köster, M., & Heiss, S. (2014). OPC-UA: Ein kritischer Vergleich der IT-Sicherheitsoptionen. In KommA.","bjps":"Gallinat M et al. (2014) OPC-UA: Ein Kritischer Vergleich Der IT-Sicherheitsoptionen. KommA.","havard":"M. Gallinat, S. Hausmann, M. Köster, S. Heiss, OPC-UA: Ein kritischer Vergleich der IT-Sicherheitsoptionen., in: KommA, 2014.","mla":"Gallinat, Melanie, et al. “OPC-UA: Ein Kritischer Vergleich Der IT-Sicherheitsoptionen.” KommA, 2014.","ufg":"Gallinat, Melanie et. al. (2014): OPC-UA: Ein kritischer Vergleich der IT-Sicherheitsoptionen., in: KommA.","ama":"Gallinat M, Hausmann S, Köster M, Heiss S. OPC-UA: Ein kritischer Vergleich der IT-Sicherheitsoptionen. In: KommA. ; 2014.","van":"Gallinat M, Hausmann S, Köster M, Heiss S. OPC-UA: Ein kritischer Vergleich der IT-Sicherheitsoptionen. In: KommA. 2014."},"department":[{"_id":"DEP5000"},{"_id":"DEP5023"}],"year":2014,"author":[{"first_name":"Melanie","full_name":"Gallinat, Melanie","last_name":"Gallinat"},{"first_name":"Stefan","full_name":"Hausmann, Stefan","last_name":"Hausmann"},{"full_name":"Köster, Markus","first_name":"Markus","last_name":"Köster"},{"last_name":"Heiss","full_name":"Heiss, Stefan","first_name":"Stefan","id":"1031"}],"status":"public"},{"citation":{"ieee":"A. Häusler, “Anforderungen an eine nachhaltige Stadtentwicklung,” in 7. DStGB-Konferenz „Kommunen aktiv für den Klimaschutz“, Bonn, 2014.","ama":"Häusler A. Anforderungen an eine nachhaltige Stadtentwicklung. In: Deutscher Städte- und Gemeindebund / BMU, ed. 7. DStGB-Konferenz „Kommunen Aktiv Für Den Klimaschutz“. ; 2014.","chicago":"Häusler, Axel. “Anforderungen an Eine Nachhaltige Stadtentwicklung.” In 7. DStGB-Konferenz „Kommunen Aktiv Für Den Klimaschutz“, edited by Deutscher Städte- und Gemeindebund / BMU, 2014.","apa":"Häusler, A. (2014). Anforderungen an eine nachhaltige Stadtentwicklung. In Deutscher Städte- und Gemeindebund / BMU (Ed.), 7. DStGB-Konferenz „Kommunen aktiv für den Klimaschutz“.","bjps":"Häusler A (2014) Anforderungen an Eine Nachhaltige Stadtentwicklung. In Deutscher Städte- und Gemeindebund / BMU (ed.), 7. DStGB-Konferenz „Kommunen Aktiv Für Den Klimaschutz“.","mla":"Häusler, Axel. “Anforderungen an Eine Nachhaltige Stadtentwicklung.” 7. DStGB-Konferenz „Kommunen Aktiv Für Den Klimaschutz“, edited by Deutscher Städte- und Gemeindebund / BMU, 2014.","havard":"A. Häusler, Anforderungen an eine nachhaltige Stadtentwicklung, in: Deutscher Städte- und Gemeindebund / BMU (Ed.), 7. DStGB-Konferenz „Kommunen Aktiv Für Den Klimaschutz“, 2014.","ufg":"Häusler, Axel: Anforderungen an eine nachhaltige Stadtentwicklung, in: Deutscher Städte- und Gemeindebund / BMU (Hg.): 7. DStGB-Konferenz „Kommunen aktiv für den Klimaschutz“, o. O. 2014.","van":"Häusler A. Anforderungen an eine nachhaltige Stadtentwicklung. In: Deutscher Städte- und Gemeindebund / BMU, editor. 7 DStGB-Konferenz „Kommunen aktiv für den Klimaschutz“. 2014.","chicago-de":"Häusler, Axel. 2014. Anforderungen an eine nachhaltige Stadtentwicklung. In: 7. DStGB-Konferenz „Kommunen aktiv für den Klimaschutz“, hg. von Deutscher Städte- und Gemeindebund / BMU.","din1505-2-1":"Häusler, Axel: Anforderungen an eine nachhaltige Stadtentwicklung. In: Deutscher Städte- und Gemeindebund / BMU (Hrsg.): 7. DStGB-Konferenz „Kommunen aktiv für den Klimaschutz“, 2014","short":"A. Häusler, in: Deutscher Städte- und Gemeindebund / BMU (Ed.), 7. DStGB-Konferenz „Kommunen Aktiv Für Den Klimaschutz“, 2014."},"publication_status":"published","title":"Anforderungen an eine nachhaltige Stadtentwicklung","extern":"1","status":"public","author":[{"orcid":"0009-0001-8565-8199","first_name":"Axel","last_name":"Häusler","id":"61520","full_name":"Häusler, Axel"}],"year":"2014","conference":{"end_date":"2014-02-14","start_date":"2014-02-14","name":"7. DStGB-Konferenz „Kommunen aktiv für den Klimaschutz“","location":"Bonn"},"department":[{"_id":"DEP1055"},{"_id":"DEP1025"},{"_id":"DEP1028"}],"corporate_editor":["Deutscher Städte- und Gemeindebund / BMU"],"user_id":"83781","date_updated":"2024-12-04T13:12:39Z","publication":"7. DStGB-Konferenz „Kommunen aktiv für den Klimaschutz“","date_created":"2021-05-13T19:37:05Z","type":"conference","_id":"5887","language":[{"iso":"eng"}]},{"citation":{"short":"J. Dünnermann, S. Fuchs, H.-P. Schmidt, S. Witte, Demo: Real Time Ethernet with Unshielded Twisted Single Pair Cabling, IEEE, 2014.","chicago-de":"Dünnermann, Jens, Stefan Fuchs, Hans-Peter Schmidt und Stefan Witte. 2014. Demo: Real time Ethernet with unshielded twisted single pair cabling. IEEE.","din1505-2-1":"Dünnermann, Jens ; Fuchs, Stefan ; Schmidt, Hans-Peter ; Witte, Stefan: Demo: Real time Ethernet with unshielded twisted single pair cabling : IEEE, 2014","apa":"Dünnermann, J., Fuchs, S., Schmidt, H.-P., & Witte, S. (2014). Demo: Real time Ethernet with unshielded twisted single pair cabling. IEEE Vehicular Networking Conference - VNC, Paderborn, Germany. IEEE.","ieee":"J. Dünnermann, S. Fuchs, H.-P. Schmidt, and S. Witte, Demo: Real time Ethernet with unshielded twisted single pair cabling. IEEE, 2014.","chicago":"Dünnermann, Jens, Stefan Fuchs, Hans-Peter Schmidt, and Stefan Witte. Demo: Real Time Ethernet with Unshielded Twisted Single Pair Cabling. IEEE, 2014.","van":"Dünnermann J, Fuchs S, Schmidt HP, Witte S. Demo: Real time Ethernet with unshielded twisted single pair cabling. IEEE; 2014.","ama":"Dünnermann J, Fuchs S, Schmidt HP, Witte S. Demo: Real Time Ethernet with Unshielded Twisted Single Pair Cabling. IEEE; 2014.","ufg":"Dünnermann, Jens u. a.: Demo: Real time Ethernet with unshielded twisted single pair cabling, o. O. 2014.","havard":"J. Dünnermann, S. Fuchs, H.-P. Schmidt, S. Witte, Demo: Real time Ethernet with unshielded twisted single pair cabling, IEEE, 2014.","mla":"Dünnermann, Jens, et al. Demo: Real Time Ethernet with Unshielded Twisted Single Pair Cabling. IEEE, 2014.","bjps":"Dünnermann J et al. (2014) Demo: Real Time Ethernet with Unshielded Twisted Single Pair Cabling. IEEE."},"publication_status":"published","title":"Demo: Real time Ethernet with unshielded twisted single pair cabling","publisher":"IEEE","status":"public","author":[{"first_name":"Jens","full_name":"Dünnermann, Jens","last_name":"Dünnermann"},{"full_name":"Fuchs, Stefan","first_name":"Stefan","last_name":"Fuchs"},{"full_name":"Schmidt, Hans-Peter","first_name":"Hans-Peter","last_name":"Schmidt"},{"full_name":"Witte, Stefan","id":"1605","last_name":"Witte","first_name":"Stefan"}],"year":"2014","conference":{"name":"IEEE Vehicular Networking Conference - VNC","location":"Paderborn, Germany","end_date":"2014-12-05","start_date":"2014-12-03"},"department":[{"_id":"DEP5000"},{"_id":"DEP5023"}],"user_id":"83781","date_updated":"2024-11-15T07:26:57Z","type":"conference_speech","date_created":"2023-07-27T11:02:59Z","_id":"10166","language":[{"iso":"eng"}]},{"date_updated":"2023-03-15T13:49:55Z","user_id":"68554","date_created":"2021-02-02T08:38:54Z","type":"conference","publication":"International Workshop on the Principles of Diagnosis (DX)","_id":"4795","language":[{"iso":"eng"}],"citation":{"apa":"Niggemann, O., Windmann, S., Volgmann, S., Bunte, A., & Stein, B. (2014). Using Learned Models for the Root Cause Analysis of Cyber-Physical Production Systems. In International Workshop on the Principles of Diagnosis (DX). Graz, Austria.","chicago":"Niggemann, Oliver, Stefan Windmann, Sören Volgmann, Andreas Bunte, and Benno Stein. “Using Learned Models for the Root Cause Analysis of Cyber-Physical Production Systems.” In International Workshop on the Principles of Diagnosis (DX). Graz, Austria, 2014.","van":"Niggemann O, Windmann S, Volgmann S, Bunte A, Stein B. Using Learned Models for the Root Cause Analysis of Cyber-Physical Production Systems. In: International Workshop on the Principles of Diagnosis (DX). Graz, Austria; 2014.","havard":"O. Niggemann, S. Windmann, S. Volgmann, A. Bunte, B. Stein, Using Learned Models for the Root Cause Analysis of Cyber-Physical Production Systems, in: International Workshop on the Principles of Diagnosis (DX), Graz, Austria, 2014.","bjps":"Niggemann O et al. (2014) Using Learned Models for the Root Cause Analysis of Cyber-Physical Production Systems. International Workshop on the Principles of Diagnosis (DX). Graz, Austria.","mla":"Niggemann, Oliver, et al. “Using Learned Models for the Root Cause Analysis of Cyber-Physical Production Systems.” International Workshop on the Principles of Diagnosis (DX), Graz, Austria, 2014.","ufg":"Niggemann, Oliver et. al. (2014): Using Learned Models for the Root Cause Analysis of Cyber-Physical Production Systems, in: International Workshop on the Principles of Diagnosis (DX).","short":"O. Niggemann, S. Windmann, S. Volgmann, A. Bunte, B. Stein, in: International Workshop on the Principles of Diagnosis (DX), Graz, Austria, 2014.","chicago-de":"Niggemann, Oliver, Stefan Windmann, Sören Volgmann, Andreas Bunte und Benno Stein. 2014. Using Learned Models for the Root Cause Analysis of Cyber-Physical Production Systems. In: International Workshop on the Principles of Diagnosis (DX). Graz, Austria.","din1505-2-1":"Niggemann, Oliver ; Windmann, Stefan ; Volgmann, Sören ; Bunte, Andreas ; Stein, Benno: Using Learned Models for the Root Cause Analysis of Cyber-Physical Production Systems. In: International Workshop on the Principles of Diagnosis (DX) : Graz, Austria, 2014","ieee":"O. Niggemann, S. Windmann, S. Volgmann, A. Bunte, and B. Stein, “Using Learned Models for the Root Cause Analysis of Cyber-Physical Production Systems,” in International Workshop on the Principles of Diagnosis (DX), 2014.","ama":"Niggemann O, Windmann S, Volgmann S, Bunte A, Stein B. Using Learned Models for the Root Cause Analysis of Cyber-Physical Production Systems. In: International Workshop on the Principles of Diagnosis (DX). Graz, Austria; 2014."},"title":"Using Learned Models for the Root Cause Analysis of Cyber-Physical Production Systems","publisher":"Graz, Austria","status":"public","department":[{"_id":"DEP5023"}],"year":2014,"author":[{"first_name":"Oliver","id":"10876","last_name":"Niggemann","full_name":"Niggemann, Oliver"},{"first_name":"Stefan","id":"58525","last_name":"Windmann","full_name":"Windmann, Stefan"},{"last_name":"Volgmann","first_name":"Sören","full_name":"Volgmann, Sören"},{"full_name":"Bunte, Andreas","first_name":"Andreas","id":"58885","last_name":"Bunte"},{"first_name":"Benno","last_name":"Stein","full_name":"Stein, Benno"}]},{"department":[{"_id":"DEP5023"}],"year":2014,"author":[{"last_name":"Moriz","first_name":"Natalia","id":"44238","full_name":"Moriz, Natalia"},{"full_name":"Böttcher, Björn","first_name":"Björn","last_name":"Böttcher"},{"full_name":"Niggemann, Oliver","last_name":"Niggemann","id":"10876","first_name":"Oliver"},{"first_name":"Josef","last_name":"Lackhove","full_name":"Lackhove, Josef"}],"status":"public","title":"Assisted Design for Automation Systems - from Formal Requirements to Final Designs","citation":{"short":"N. Moriz, B. Böttcher, O. Niggemann, J. Lackhove, in: 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Barcelona, Spain, 2014.","din1505-2-1":"Moriz, Natalia ; Böttcher, Björn ; Niggemann, Oliver ; Lackhove, Josef: Assisted Design for Automation Systems - from Formal Requirements to Final Designs. In: 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Barcelona, Spain, 2014","chicago-de":"Moriz, Natalia, Björn Böttcher, Oliver Niggemann und Josef Lackhove. 2014. Assisted Design for Automation Systems - from Formal Requirements to Final Designs. In: 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Barcelona, Spain.","ama":"Moriz N, Böttcher B, Niggemann O, Lackhove J. Assisted Design for Automation Systems - from Formal Requirements to Final Designs. In: 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Barcelona, Spain; 2014.","van":"Moriz N, Böttcher B, Niggemann O, Lackhove J. Assisted Design for Automation Systems - from Formal Requirements to Final Designs. In: 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Barcelona, Spain; 2014.","bjps":"Moriz N et al. (2014) Assisted Design for Automation Systems - from Formal Requirements to Final Designs. 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Barcelona, Spain.","mla":"Moriz, Natalia, et al. “Assisted Design for Automation Systems - from Formal Requirements to Final Designs.” 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2014.","havard":"N. Moriz, B. Böttcher, O. Niggemann, J. Lackhove, Assisted Design for Automation Systems - from Formal Requirements to Final Designs, in: 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Barcelona, Spain, 2014.","ufg":"Moriz, Natalia et. al. (2014): Assisted Design for Automation Systems - from Formal Requirements to Final Designs, in: 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Barcelona, Spain.","ieee":"N. Moriz, B. Böttcher, O. Niggemann, and J. Lackhove, “Assisted Design for Automation Systems - from Formal Requirements to Final Designs,” in 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2014.","apa":"Moriz, N., Böttcher, B., Niggemann, O., & Lackhove, J. (2014). Assisted Design for Automation Systems - from Formal Requirements to Final Designs. In 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Barcelona, Spain.","chicago":"Moriz, Natalia, Björn Böttcher, Oliver Niggemann, and Josef Lackhove. “Assisted Design for Automation Systems - from Formal Requirements to Final Designs.” In 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Barcelona, Spain, 2014."},"language":[{"iso":"eng"}],"place":"Barcelona, Spain","_id":"4803","date_created":"2021-02-02T09:09:47Z","type":"conference","publication":"19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)","date_updated":"2023-03-15T13:49:55Z","user_id":"68554"},{"place":"Prague, Czech Republic","language":[{"iso":"eng"}],"_id":"4804","user_id":"68554","date_updated":"2023-03-15T13:49:55Z","editor":[{"full_name":"Schaub, T., Friedrich, G. O'Sullivan, B.","first_name":"B.","last_name":"Schaub, T., Friedrich, G. O'Sullivan"}],"publication":"21st European Conference on Artificial Intelligence Frontiers in Artificial Intelligence and Applications, 2014","type":"conference","date_created":"2021-02-02T09:10:58Z","status":"public","page":"pp. 977-978","publisher":"Vol. 263","year":2014,"author":[{"last_name":"Böttcher","first_name":"Björn","full_name":"Böttcher, Björn"},{"first_name":"Natalia","full_name":"Moriz, Natalia","last_name":"Moriz","id":"44238"},{"id":"10876","full_name":"Niggemann, Oliver","first_name":"Oliver","last_name":"Niggemann"}],"department":[{"_id":"DEP5023"}],"citation":{"din1505-2-1":"Böttcher, Björn ; Moriz, Natalia ; Niggemann, Oliver: From Formal Requirements on Technical Systems to Complete Designs - A Holistic Approach. In: Schaub, T., Friedrich, G. O’Sullivan, B. (Hrsg.): 21st European Conference on Artificial Intelligence Frontiers in Artificial Intelligence and Applications, 2014. Prague, Czech Republic : Vol. 263, 2014, S. 977–978","chicago-de":"Böttcher, Björn, Natalia Moriz und Oliver Niggemann. 2014. From Formal Requirements on Technical Systems to Complete Designs - A Holistic Approach. In: 21st European Conference on Artificial Intelligence Frontiers in Artificial Intelligence and Applications, 2014, hg. von B. Schaub, T., Friedrich, G. O’Sullivan, 977–978. Prague, Czech Republic: Vol. 263.","short":"B. Böttcher, N. Moriz, O. Niggemann, in: B. Schaub, T., Friedrich, G. O’Sullivan (Ed.), 21st European Conference on Artificial Intelligence Frontiers in Artificial Intelligence and Applications, 2014, Vol. 263, Prague, Czech Republic, 2014, pp. 977–978.","chicago":"Böttcher, Björn, Natalia Moriz, and Oliver Niggemann. “From Formal Requirements on Technical Systems to Complete Designs - A Holistic Approach.” In 21st European Conference on Artificial Intelligence Frontiers in Artificial Intelligence and Applications, 2014, edited by B. Schaub, T., Friedrich, G. O’Sullivan, 977–78. Prague, Czech Republic: Vol. 263, 2014.","apa":"Böttcher, B., Moriz, N., & Niggemann, O. (2014). From Formal Requirements on Technical Systems to Complete Designs - A Holistic Approach. In B. Schaub, T., Friedrich, G. O’Sullivan (Ed.), 21st European Conference on Artificial Intelligence Frontiers in Artificial Intelligence and Applications, 2014 (pp. 977–978). Prague, Czech Republic: Vol. 263.","ufg":"Böttcher, Björn et. al. (2014): From Formal Requirements on Technical Systems to Complete Designs - A Holistic Approach, in: B. Schaub, T., Friedrich, G. O’Sullivan (Hg.): 21st European Conference on Artificial Intelligence Frontiers in Artificial Intelligence and Applications, 2014, Prague, Czech Republic, S. 977–978.","bjps":"Böttcher B, Moriz N and Niggemann O (2014) From Formal Requirements on Technical Systems to Complete Designs - A Holistic Approach. In Schaub, T., Friedrich, G. O’Sullivan B (ed.), 21st European Conference on Artificial Intelligence Frontiers in Artificial Intelligence and Applications, 2014. Prague, Czech Republic: Vol. 263, pp. 977–978.","havard":"B. Böttcher, N. Moriz, O. Niggemann, From Formal Requirements on Technical Systems to Complete Designs - A Holistic Approach, in: B. Schaub, T., Friedrich, G. O’Sullivan (Ed.), 21st European Conference on Artificial Intelligence Frontiers in Artificial Intelligence and Applications, 2014, Vol. 263, Prague, Czech Republic, 2014: pp. 977–978.","mla":"Böttcher, Björn, et al. “From Formal Requirements on Technical Systems to Complete Designs - A Holistic Approach.” 21st European Conference on Artificial Intelligence Frontiers in Artificial Intelligence and Applications, 2014, edited by B. Schaub, T., Friedrich, G. O’Sullivan, Vol. 263, 2014, pp. 977–78.","van":"Böttcher B, Moriz N, Niggemann O. From Formal Requirements on Technical Systems to Complete Designs - A Holistic Approach. In: Schaub, T., Friedrich, G. O’Sullivan B, editor. 21st European Conference on Artificial Intelligence Frontiers in Artificial Intelligence and Applications, 2014. Prague, Czech Republic: Vol. 263; 2014. p. 977–8.","ieee":"B. Böttcher, N. Moriz, and O. Niggemann, “From Formal Requirements on Technical Systems to Complete Designs - A Holistic Approach,” in 21st European Conference on Artificial Intelligence Frontiers in Artificial Intelligence and Applications, 2014, 2014, pp. 977–978.","ama":"Böttcher B, Moriz N, Niggemann O. From Formal Requirements on Technical Systems to Complete Designs - A Holistic Approach. In: Schaub, T., Friedrich, G. O’Sullivan B, ed. 21st European Conference on Artificial Intelligence Frontiers in Artificial Intelligence and Applications, 2014. Prague, Czech Republic: Vol. 263; 2014:977-978."},"title":"From Formal Requirements on Technical Systems to Complete Designs - A Holistic Approach"},{"publisher":"Imagebroschüre des Spitzenclusters zum Thema Industrie 4.0","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2014,"author":[{"last_name":"Gausemeier","first_name":"Jürgen","full_name":"Gausemeier, Jürgen"},{"last_name":"Dumitrescu","full_name":"Dumitrescu, Roman","first_name":"Roman"},{"last_name":"Jasperneite","first_name":"Jürgen","id":"1899","full_name":"Jasperneite, Jürgen"},{"first_name":"Arno","last_name":"Kühn","full_name":"Kühn, Arno"},{"id":"1486","first_name":"Henning","last_name":"Trsek","full_name":"Trsek, Henning"}],"citation":{"ama":"Gausemeier J, Dumitrescu R, Jasperneite J, Kühn A, Trsek H. Auf Dem Weg Zu Industrie 4.0: Lösungen Aus Dem Spitzencluster It´s OWL. ...: Imagebroschüre des Spitzenclusters zum Thema Industrie 4.0; 2014.","ieee":"J. Gausemeier, R. Dumitrescu, J. Jasperneite, A. Kühn, and H. Trsek, Auf dem Weg zu Industrie 4.0: Lösungen aus dem Spitzencluster it´s OWL. ...: Imagebroschüre des Spitzenclusters zum Thema Industrie 4.0, 2014.","chicago-de":"Gausemeier, Jürgen, Roman Dumitrescu, Jürgen Jasperneite, Arno Kühn und Henning Trsek. 2014. Auf dem Weg zu Industrie 4.0: Lösungen aus dem Spitzencluster it´s OWL. ...: Imagebroschüre des Spitzenclusters zum Thema Industrie 4.0.","din1505-2-1":"Gausemeier, Jürgen ; Dumitrescu, Roman ; Jasperneite, Jürgen ; Kühn, Arno ; Trsek, Henning: Auf dem Weg zu Industrie 4.0: Lösungen aus dem Spitzencluster it´s OWL. ... : Imagebroschüre des Spitzenclusters zum Thema Industrie 4.0, 2014","short":"J. Gausemeier, R. Dumitrescu, J. Jasperneite, A. Kühn, H. Trsek, Auf Dem Weg Zu Industrie 4.0: Lösungen Aus Dem Spitzencluster It´s OWL, Imagebroschüre des Spitzenclusters zum Thema Industrie 4.0, ..., 2014.","bjps":"Gausemeier J et al. (2014) Auf Dem Weg Zu Industrie 4.0: Lösungen Aus Dem Spitzencluster It´s OWL. ...: Imagebroschüre des Spitzenclusters zum Thema Industrie 4.0.","havard":"J. Gausemeier, R. Dumitrescu, J. Jasperneite, A. Kühn, H. Trsek, Auf dem Weg zu Industrie 4.0: Lösungen aus dem Spitzencluster it´s OWL, Imagebroschüre des Spitzenclusters zum Thema Industrie 4.0, ..., 2014.","mla":"Gausemeier, Jürgen, et al. Auf Dem Weg Zu Industrie 4.0: Lösungen Aus Dem Spitzencluster It´s OWL. Imagebroschüre des Spitzenclusters zum Thema Industrie 4.0, 2014.","ufg":"Gausemeier, Jürgen et. al. (2014): Auf dem Weg zu Industrie 4.0: Lösungen aus dem Spitzencluster it´s OWL, ...","van":"Gausemeier J, Dumitrescu R, Jasperneite J, Kühn A, Trsek H. Auf dem Weg zu Industrie 4.0: Lösungen aus dem Spitzencluster it´s OWL. ...: Imagebroschüre des Spitzenclusters zum Thema Industrie 4.0; 2014.","chicago":"Gausemeier, Jürgen, Roman Dumitrescu, Jürgen Jasperneite, Arno Kühn, and Henning Trsek. Auf Dem Weg Zu Industrie 4.0: Lösungen Aus Dem Spitzencluster It´s OWL. ...: Imagebroschüre des Spitzenclusters zum Thema Industrie 4.0, 2014.","apa":"Gausemeier, J., Dumitrescu, R., Jasperneite, J., Kühn, A., & Trsek, H. (2014). Auf dem Weg zu Industrie 4.0: Lösungen aus dem Spitzencluster it´s OWL. ...: Imagebroschüre des Spitzenclusters zum Thema Industrie 4.0."},"title":"Auf dem Weg zu Industrie 4.0: Lösungen aus dem Spitzencluster it´s OWL","_id":"4884","language":[{"iso":"eng"}],"place":"...","date_updated":"2023-03-15T13:49:56Z","user_id":"45673","date_created":"2021-02-02T14:05:39Z","type":"report_science"},{"quality_controlled":"1","status":"public","department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"conference":{"location":"Fortaleza: Brazil","name":" 5th seminar DOCOMOMO Norte/Nordeste","end_date":"2014","start_date":"2014"},"year":2014,"author":[{"full_name":"Martau, Betina Tschiedel","first_name":"Betina Tschiedel","last_name":"Martau"},{"last_name":"da Silva","full_name":"da Silva, F. Duro","first_name":"F. Duro"},{"orcid":"0000-0002-8594-3168","full_name":"Pottgiesser, Uta","last_name":"Pottgiesser","id":"27166","first_name":"Uta"}],"publication_status":"published","citation":{"ama":"Martau BT, da Silva FD, Pottgiesser U. Estratégias de intervenções para requalificação e valorização do patrimônio arquitetônico moderno : estudo de caso no edificio da smov em Porto Alegre. In: Proceedings of 5th seminar DOCOMOMO Norte/Nordeste. Proceedings of 5th seminar DOCOMOMO Norte/Nordeste. Fortaleza; 2014.","ieee":"B. T. Martau, F. D. da Silva, and U. Pottgiesser, “Estratégias de intervenções para requalificação e valorização do patrimônio arquitetônico moderno : estudo de caso no edificio da smov em Porto Alegre,” in Proceedings of 5th seminar DOCOMOMO Norte/Nordeste, Fortaleza: Brazil, 2014.","short":"B.T. Martau, F.D. da Silva, U. Pottgiesser, in: Proceedings of 5th seminar DOCOMOMO Norte/Nordeste, Fortaleza, 2014.","din1505-2-1":"Martau, Betina Tschiedel ; da Silva, F. Duro ; Pottgiesser, Uta: Estratégias de intervenções para requalificação e valorização do patrimônio arquitetônico moderno : estudo de caso no edificio da smov em Porto Alegre. In: Proceedings of 5th seminar DOCOMOMO Norte/Nordeste, Proceedings of 5th seminar DOCOMOMO Norte/Nordeste. Fortaleza, 2014","chicago-de":"Martau, Betina Tschiedel, F. Duro da Silva und Uta Pottgiesser. 2014. Estratégias de intervenções para requalificação e valorização do patrimônio arquitetônico moderno : estudo de caso no edificio da smov em Porto Alegre. In: Proceedings of 5th seminar DOCOMOMO Norte/Nordeste. Proceedings of 5th seminar DOCOMOMO Norte/Nordeste. Fortaleza.","van":"Martau BT, da Silva FD, Pottgiesser U. Estratégias de intervenções para requalificação e valorização do patrimônio arquitetônico moderno : estudo de caso no edificio da smov em Porto Alegre. In: Proceedings of 5th seminar DOCOMOMO Norte/Nordeste. Fortaleza; 2014. (Proceedings of 5th seminar DOCOMOMO Norte/Nordeste).","mla":"Martau, Betina Tschiedel, et al. “Estratégias de intervenções para requalificação e valorização do patrimônio arquitetônico moderno : estudo de caso no edificio da smov em Porto Alegre.” Proceedings of 5th seminar DOCOMOMO Norte/Nordeste, 2014.","bjps":"Martau BT, da Silva FD and Pottgiesser U (2014) Estratégias de intervenções para requalificação e valorização do patrimônio arquitetônico moderno : estudo de caso no edificio da smov em Porto Alegre. Proceedings of 5th seminar DOCOMOMO Norte/Nordeste. Fortaleza.","havard":"B.T. Martau, F.D. da Silva, U. Pottgiesser, Estratégias de intervenções para requalificação e valorização do patrimônio arquitetônico moderno : estudo de caso no edificio da smov em Porto Alegre, in: Proceedings of 5th seminar DOCOMOMO Norte/Nordeste, Fortaleza, 2014.","ufg":"Martau, Betina Tschiedel et. al. (2014): Estratégias de intervenções para requalificação e valorização do patrimônio arquitetônico moderno : estudo de caso no edificio da smov em Porto Alegre, in: Proceedings of 5th seminar DOCOMOMO Norte/Nordeste (=Proceedings of 5th seminar DOCOMOMO Norte/Nordeste), Fortaleza.","apa":"Martau, B. T., da Silva, F. D., & Pottgiesser, U. (2014). Estratégias de intervenções para requalificação e valorização do patrimônio arquitetônico moderno : estudo de caso no edificio da smov em Porto Alegre. In Proceedings of 5th seminar DOCOMOMO Norte/Nordeste. Fortaleza.","chicago":"Martau, Betina Tschiedel, F. Duro da Silva, and Uta Pottgiesser. “Estratégias de intervenções para requalificação e valorização do patrimônio arquitetônico moderno : estudo de caso no edificio da smov em Porto Alegre.” In Proceedings of 5th seminar DOCOMOMO Norte/Nordeste. Proceedings of 5th seminar DOCOMOMO Norte/Nordeste. Fortaleza, 2014."},"title":"Estratégias de intervenções para requalificação e valorização do patrimônio arquitetônico moderno : estudo de caso no edificio da smov em Porto Alegre","series_title":"Proceedings of 5th seminar DOCOMOMO Norte/Nordeste","_id":"5221","language":[{"iso":"spa"}],"place":"Fortaleza","date_updated":"2023-03-15T13:49:58Z","user_id":"45673","type":"conference","date_created":"2021-03-04T14:31:22Z","publication":"Proceedings of 5th seminar DOCOMOMO Norte/Nordeste"},{"language":[{"iso":"eng"}],"place":"Ahmedabad","_id":"5222","date_updated":"2023-03-15T13:49:58Z","user_id":"45673","editor":[{"first_name":"Rajan","last_name":"Rawal","full_name":"Rawal, Rajan"}],"date_created":"2021-03-04T14:37:21Z","type":"conference","publication_identifier":{"isbn":["978-93-83184-02-6 "]},"publication":"Sustainable habitat for developing societies : choosing the way forward : 30th International PLEA Conference, December 16-18, 2014 : book of abstracts","status":"public","quality_controlled":"1","publisher":"CEPT University Press","department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"conference":{"location":"Ahmedabad, India ","name":"30th International PLEA Conference","end_date":"2014-12-18","start_date":"2014-12-16"},"year":2014,"author":[{"first_name":"Reinhard","last_name":"Doleschal","full_name":"Doleschal, Reinhard","id":"14632"},{"orcid":"0000-0002-8594-3168","id":"27166","full_name":"Pottgiesser, Uta","first_name":"Uta","last_name":"Pottgiesser"},{"first_name":"K. B.","full_name":"Akhilesh, K. B.","last_name":"Akhilesh"},{"full_name":"Kabre, Chitrarekha ","first_name":"Chitrarekha ","last_name":"Kabre"},{"first_name":"Katharina","last_name":"König","full_name":"König, Katharina"}],"publication_status":"published","citation":{"ieee":"R. Doleschal, U. Pottgiesser, K. B. Akhilesh, C. Kabre, and K. König, “Integrating user awareness and behavior into building and product design for India : survey in eight giant cities in India,” in Sustainable habitat for developing societies : choosing the way forward : 30th International PLEA Conference, December 16-18, 2014 : book of abstracts, Ahmedabad, India , 2014.","ama":"Doleschal R, Pottgiesser U, Akhilesh KB, Kabre C, König K. Integrating user awareness and behavior into building and product design for India : survey in eight giant cities in India. In: Rawal R, ed. Sustainable Habitat for Developing Societies : Choosing the Way Forward : 30th International PLEA Conference, December 16-18, 2014 : Book of Abstracts. Ahmedabad: CEPT University Press; 2014.","chicago":"Doleschal, Reinhard, Uta Pottgiesser, K. B. Akhilesh, Chitrarekha Kabre, and Katharina König. “Integrating User Awareness and Behavior into Building and Product Design for India : Survey in Eight Giant Cities in India.” In Sustainable Habitat for Developing Societies : Choosing the Way Forward : 30th International PLEA Conference, December 16-18, 2014 : Book of Abstracts, edited by Rajan Rawal. Ahmedabad: CEPT University Press, 2014.","apa":"Doleschal, R., Pottgiesser, U., Akhilesh, K. B., Kabre, C., & König, K. (2014). Integrating user awareness and behavior into building and product design for India : survey in eight giant cities in India. In R. Rawal (Ed.), Sustainable habitat for developing societies : choosing the way forward : 30th International PLEA Conference, December 16-18, 2014 : book of abstracts. Ahmedabad: CEPT University Press.","havard":"R. Doleschal, U. Pottgiesser, K.B. Akhilesh, C. Kabre, K. König, Integrating user awareness and behavior into building and product design for India : survey in eight giant cities in India, in: R. Rawal (Ed.), Sustainable Habitat for Developing Societies : Choosing the Way Forward : 30th International PLEA Conference, December 16-18, 2014 : Book of Abstracts, CEPT University Press, Ahmedabad, 2014.","bjps":"Doleschal R et al. (2014) Integrating User Awareness and Behavior into Building and Product Design for India : Survey in Eight Giant Cities in India. In Rawal R (ed.), Sustainable Habitat for Developing Societies : Choosing the Way Forward : 30th International PLEA Conference, December 16-18, 2014 : Book of Abstracts. Ahmedabad: CEPT University Press.","mla":"Doleschal, Reinhard, et al. “Integrating User Awareness and Behavior into Building and Product Design for India : Survey in Eight Giant Cities in India.” Sustainable Habitat for Developing Societies : Choosing the Way Forward : 30th International PLEA Conference, December 16-18, 2014 : Book of Abstracts, edited by Rajan Rawal, CEPT University Press, 2014.","ufg":"Doleschal, Reinhard et. al. (2014): Integrating user awareness and behavior into building and product design for India : survey in eight giant cities in India, in: Rajan Rawal (Hg.): Sustainable habitat for developing societies : choosing the way forward : 30th International PLEA Conference, December 16-18, 2014 : book of abstracts, Ahmedabad.","van":"Doleschal R, Pottgiesser U, Akhilesh KB, Kabre C, König K. Integrating user awareness and behavior into building and product design for India : survey in eight giant cities in India. In: Rawal R, editor. Sustainable habitat for developing societies : choosing the way forward : 30th International PLEA Conference, December 16-18, 2014 : book of abstracts. Ahmedabad: CEPT University Press; 2014.","din1505-2-1":"Doleschal, Reinhard ; Pottgiesser, Uta ; Akhilesh, K. B. ; Kabre, Chitrarekha ; König, Katharina: Integrating user awareness and behavior into building and product design for India : survey in eight giant cities in India. In: Rawal, R. (Hrsg.): Sustainable habitat for developing societies : choosing the way forward : 30th International PLEA Conference, December 16-18, 2014 : book of abstracts. Ahmedabad : CEPT University Press, 2014","chicago-de":"Doleschal, Reinhard, Uta Pottgiesser, K. B. Akhilesh, Chitrarekha Kabre und Katharina König. 2014. Integrating user awareness and behavior into building and product design for India : survey in eight giant cities in India. In: Sustainable habitat for developing societies : choosing the way forward : 30th International PLEA Conference, December 16-18, 2014 : book of abstracts, hg. von Rajan Rawal. Ahmedabad: CEPT University Press.","short":"R. Doleschal, U. Pottgiesser, K.B. Akhilesh, C. Kabre, K. König, in: R. Rawal (Ed.), Sustainable Habitat for Developing Societies : Choosing the Way Forward : 30th International PLEA Conference, December 16-18, 2014 : Book of Abstracts, CEPT University Press, Ahmedabad, 2014."},"title":"Integrating user awareness and behavior into building and product design for India : survey in eight giant cities in India"},{"publication_status":"published","citation":{"ama":"Tomlow J, Dill A, Pottgiesser U, International DOCOMOMO Technology Seminar, eds. Perceived Technologies in the Modern Movement 1918-1975 : Proceedings of the 13th International DOCOMOMO Technology Seminar, January 25/26 2013, Karlsruhe . the Seminar Figures Also as the 10. Karlsruher Tagung “Das Architektonische Erbe” / International Working Party for Documentation and Conservation of Buildings, Sites and Neighbourhoods of the Modern Movement . Zittau : Graphische Werkstätten Zittau ; 2014:88 Seiten.","van":"Tomlow J, Dill A, Pottgiesser U, International DOCOMOMO Technology Seminar, editors. Perceived technologies in the modern movement 1918-1975 : proceedings of the 13th International DOCOMOMO Technology Seminar, january 25/26 2013, Karlsruhe . the seminar figures also as the 10. Karlsruher Tagung “Das architektonische Erbe” / International Working Party for Documentation and Conservation of Buildings, Sites and Neighbourhoods of the Modern Movement . Zittau : Graphische Werkstätten Zittau ; 2014. ( Preservation technology dossier ).","mla":"Tomlow, Jos, et al., editors. Perceived Technologies in the Modern Movement 1918-1975 : Proceedings of the 13th International DOCOMOMO Technology Seminar, January 25/26 2013, Karlsruhe . the Seminar Figures Also as the 10. Karlsruher Tagung “Das Architektonische Erbe” / International Working Party for Documentation and Conservation of Buildings, Sites and Neighbourhoods of the Modern Movement . no. 13, Graphische Werkstätten Zittau , 2014, p. 88 Seiten.","havard":"J. Tomlow, A. Dill, U. Pottgiesser, International DOCOMOMO Technology Seminar, eds., Perceived technologies in the modern movement 1918-1975 : proceedings of the 13th International DOCOMOMO Technology Seminar, january 25/26 2013, Karlsruhe . the seminar figures also as the 10. Karlsruher Tagung “Das architektonische Erbe” / International Working Party for Documentation and Conservation of Buildings, Sites and Neighbourhoods of the Modern Movement , Graphische Werkstätten Zittau , Zittau , 2014.","bjps":"Tomlow J et al. (eds) (2014) Perceived Technologies in the Modern Movement 1918-1975 : Proceedings of the 13th International DOCOMOMO Technology Seminar, January 25/26 2013, Karlsruhe . the Seminar Figures Also as the 10. Karlsruher Tagung ‘Das Architektonische Erbe’ / International Working Party for Documentation and Conservation of Buildings, Sites and Neighbourhoods of the Modern Movement . Zittau : Graphische Werkstätten Zittau .","ufg":"Tomlow, Jos et. al. (Hgg.) (2014): Perceived technologies in the modern movement 1918-1975 : proceedings of the 13th International DOCOMOMO Technology Seminar, january 25/26 2013, Karlsruhe . the seminar figures also as the 10. Karlsruher Tagung „Das architektonische Erbe“ / International Working Party for Documentation and Conservation of Buildings, Sites and Neighbourhoods of the Modern Movement (= Preservation technology dossier ), Zittau .","ieee":"J. Tomlow, A. Dill, U. Pottgiesser, and International DOCOMOMO Technology Seminar, Eds., Perceived technologies in the modern movement 1918-1975 : proceedings of the 13th International DOCOMOMO Technology Seminar, january 25/26 2013, Karlsruhe . the seminar figures also as the 10. Karlsruher Tagung “Das architektonische Erbe” / International Working Party for Documentation and Conservation of Buildings, Sites and Neighbourhoods of the Modern Movement , no. 13. Zittau : Graphische Werkstätten Zittau , 2014, p. 88 Seiten.","apa":"Tomlow, J., Dill, A., Pottgiesser, U., & International DOCOMOMO Technology Seminar (Eds.). (2014). Perceived technologies in the modern movement 1918-1975 : proceedings of the 13th International DOCOMOMO Technology Seminar, january 25/26 2013, Karlsruhe . the seminar figures also as the 10. Karlsruher Tagung “Das architektonische Erbe” / International Working Party for Documentation and Conservation of Buildings, Sites and Neighbourhoods of the Modern Movement (p. 88 Seiten). Presented at the 13th International DOCOMOMO Technology Seminar, Zittau : Graphische Werkstätten Zittau .","chicago":"Tomlow, Jos, Alex Dill, Uta Pottgiesser, and International DOCOMOMO Technology Seminar, eds. Perceived Technologies in the Modern Movement 1918-1975 : Proceedings of the 13th International DOCOMOMO Technology Seminar, January 25/26 2013, Karlsruhe . the Seminar Figures Also as the 10. Karlsruher Tagung “Das Architektonische Erbe” / International Working Party for Documentation and Conservation of Buildings, Sites and Neighbourhoods of the Modern Movement . Preservation Technology Dossier . Zittau : Graphische Werkstätten Zittau , 2014.","short":"J. Tomlow, A. Dill, U. Pottgiesser, International DOCOMOMO Technology Seminar, eds., Perceived Technologies in the Modern Movement 1918-1975 : Proceedings of the 13th International DOCOMOMO Technology Seminar, January 25/26 2013, Karlsruhe . the Seminar Figures Also as the 10. Karlsruher Tagung “Das Architektonische Erbe” / International Working Party for Documentation and Conservation of Buildings, Sites and Neighbourhoods of the Modern Movement , Graphische Werkstätten Zittau , Zittau , 2014.","chicago-de":"Tomlow, Jos, Alex Dill, Uta Pottgiesser und International DOCOMOMO Technology Seminar, Hrsg. 2014. Perceived technologies in the modern movement 1918-1975 : proceedings of the 13th International DOCOMOMO Technology Seminar, january 25/26 2013, Karlsruhe . the seminar figures also as the 10. Karlsruher Tagung „Das architektonische Erbe“ / International Working Party for Documentation and Conservation of Buildings, Sites and Neighbourhoods of the Modern Movement . Preservation technology dossier . Zittau : Graphische Werkstätten Zittau .","din1505-2-1":"Tomlow, J. ; Dill, A. ; Pottgiesser, U. ; International DOCOMOMO Technology Seminar (Hrsg.): Perceived technologies in the modern movement 1918-1975 : proceedings of the 13th International DOCOMOMO Technology Seminar, january 25/26 2013, Karlsruhe . the seminar figures also as the 10. Karlsruher Tagung „Das architektonische Erbe“ / International Working Party for Documentation and Conservation of Buildings, Sites and Neighbourhoods of the Modern Movement , Preservation technology dossier . Zittau : Graphische Werkstätten Zittau , 2014"},"title":"Perceived technologies in the modern movement 1918-1975 : proceedings of the 13th International DOCOMOMO Technology Seminar, january 25/26 2013, Karlsruhe . the seminar figures also as the 10. Karlsruher Tagung \"Das architektonische Erbe\" / International Working Party for Documentation and Conservation of Buildings, Sites and Neighbourhoods of the Modern Movement ","series_title":" Preservation technology dossier ","quality_controlled":"1","publisher":"Graphische Werkstätten Zittau ","page":" 88 Seiten ","status":"public","issue":"13","department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"conference":{"start_date":"2013-01-25","end_date":"2013-01-26","location":"Karlsruhe","name":"13th International DOCOMOMO Technology Seminar"},"year":2014,"editor":[{"full_name":"Tomlow, Jos","last_name":"Tomlow","first_name":"Jos"},{"full_name":"Dill, Alex","last_name":"Dill","first_name":"Alex"},{"first_name":"Uta","full_name":"Pottgiesser, Uta","last_name":"Pottgiesser","id":"27166","orcid":"0000-0002-8594-3168"}],"corporate_editor":["International DOCOMOMO Technology Seminar","International Working Party for Documentation and Conservation of Buildings, Sites and Neighbourhoods of the Modern Movement"],"date_updated":"2023-03-15T13:49:58Z","user_id":"45673","type":"conference_editor","date_created":"2021-03-04T14:51:16Z","publication_identifier":{"isbn":[" 978-3-929744-89-7 "]},"_id":"5223","language":[{"iso":"eng"}],"place":"Zittau "},{"status":"public","year":"2014","author":[{"last_name":"Broeker","id":"43927","full_name":"Broeker, Timo","first_name":"Timo"},{"full_name":"Hoffarth, M.","first_name":"M.","last_name":"Hoffarth"},{"orcid":"0000-0001-6401-8873","id":"13209","full_name":"Schneider, Jan","first_name":"Jan","last_name":"Schneider"},{"last_name":"Heikrodt","first_name":"Klaus","full_name":"Heikrodt, Klaus","id":"46269"}],"conference":{"location":"Berlin","name":"12. Internationaler Fachkongress für Biokraftstoffe \"Fuels of the Future\" ","start_date":"2014-01-20"},"department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"citation":{"van":"Broeker T, Hoffarth M, Schneider J, Heikrodt K. BioCo2nvert - Synergies of P2G and alcoholic CO2 for the efficient production of methan and bioethanol. In: 12 Internationaler Fachkongress für Biokraftstoffe “Fuels of the Future” (Vortrag und Tagungsbandbeitrag), Berlin, 20012014. 2014.","ama":"Broeker T, Hoffarth M, Schneider J, Heikrodt K. BioCo2nvert - Synergies of P2G and alcoholic CO2 for the efficient production of methan and bioethanol. In: 12. Internationaler Fachkongress Für Biokraftstoffe “Fuels of the Future” (Vortrag Und Tagungsbandbeitrag), Berlin, 20.01.2014. ; 2014.","ufg":"Broeker, Timo u. a.: BioCo2nvert - Synergies of P2G and alcoholic CO2 for the efficient production of methan and bioethanol, in: o. Hg.: 12. Internationaler Fachkongress für Biokraftstoffe „Fuels of the Future“ (Vortrag und Tagungsbandbeitrag), Berlin, 20.01.2014, o. O. 2014.","havard":"T. Broeker, M. Hoffarth, J. Schneider, K. Heikrodt, BioCo2nvert - Synergies of P2G and alcoholic CO2 for the efficient production of methan and bioethanol, in: 12. Internationaler Fachkongress Für Biokraftstoffe “Fuels of the Future” (Vortrag Und Tagungsbandbeitrag), Berlin, 20.01.2014, 2014.","bjps":"Broeker T et al. (2014) BioCo2nvert - Synergies of P2G and Alcoholic CO2 for the Efficient Production of Methan and Bioethanol. 12. Internationaler Fachkongress Für Biokraftstoffe ‘Fuels of the Future’ (Vortrag Und Tagungsbandbeitrag), Berlin, 20.01.2014.","mla":"Broeker, Timo, et al. “BioCo2nvert - Synergies of P2G and Alcoholic CO2 for the Efficient Production of Methan and Bioethanol.” 12. Internationaler Fachkongress Für Biokraftstoffe “Fuels of the Future” (Vortrag Und Tagungsbandbeitrag), Berlin, 20.01.2014, 2014.","apa":"Broeker, T., Hoffarth, M., Schneider, J., & Heikrodt, K. (2014). BioCo2nvert - Synergies of P2G and alcoholic CO2 for the efficient production of methan and bioethanol. 12. Internationaler Fachkongress Für Biokraftstoffe “Fuels of the Future” (Vortrag Und Tagungsbandbeitrag), Berlin, 20.01.2014. 12. Internationaler Fachkongress für Biokraftstoffe “Fuels of the Future” , Berlin.","ieee":"T. Broeker, M. Hoffarth, J. Schneider, and K. Heikrodt, “BioCo2nvert - Synergies of P2G and alcoholic CO2 for the efficient production of methan and bioethanol,” presented at the 12. Internationaler Fachkongress für Biokraftstoffe “Fuels of the Future” , Berlin, 2014.","chicago":"Broeker, Timo, M. Hoffarth, Jan Schneider, and Klaus Heikrodt. “BioCo2nvert - Synergies of P2G and Alcoholic CO2 for the Efficient Production of Methan and Bioethanol.” In 12. Internationaler Fachkongress Für Biokraftstoffe “Fuels of the Future” (Vortrag Und Tagungsbandbeitrag), Berlin, 20.01.2014, 2014.","short":"T. Broeker, M. Hoffarth, J. Schneider, K. Heikrodt, in: 12. Internationaler Fachkongress Für Biokraftstoffe “Fuels of the Future” (Vortrag Und Tagungsbandbeitrag), Berlin, 20.01.2014, 2014.","din1505-2-1":"Broeker, Timo ; Hoffarth, M. ; Schneider, Jan ; Heikrodt, Klaus: BioCo2nvert - Synergies of P2G and alcoholic CO2 for the efficient production of methan and bioethanol. In: 12. Internationaler Fachkongress für Biokraftstoffe „Fuels of the Future“ (Vortrag und Tagungsbandbeitrag), Berlin, 20.01.2014, 2014","chicago-de":"Broeker, Timo, M. Hoffarth, Jan Schneider und Klaus Heikrodt. 2014. BioCo2nvert - Synergies of P2G and alcoholic CO2 for the efficient production of methan and bioethanol. In: 12. Internationaler Fachkongress für Biokraftstoffe „Fuels of the Future“ (Vortrag und Tagungsbandbeitrag), Berlin, 20.01.2014."},"publication_status":"published","title":"BioCo2nvert - Synergies of P2G and alcoholic CO2 for the efficient production of methan and bioethanol","language":[{"iso":"eng"}],"_id":"5442","user_id":"83779","date_updated":"2024-05-24T07:57:44Z","publication":"12. Internationaler Fachkongress für Biokraftstoffe \"Fuels of the Future\" (Vortrag und Tagungsbandbeitrag), Berlin, 20.01.2014","date_created":"2021-04-08T08:26:59Z","type":"conference"},{"editor":[{"first_name":"Bernd","full_name":"Hoppe, Bernd","last_name":"Hoppe"}],"corporate_editor":["Verein für Arznei- und Gewürzpflanzen Saluplanta "],"date_updated":"2024-10-30T07:57:32Z","user_id":"83781","type":"conference_abstract","date_created":"2021-04-08T09:02:13Z","publication":"24. Bernburger Winterseminar Arznei- und Gewürzpflanzen : 18.02. - 19.02.2014 ; Tagungsbroschüre ","_id":"5448","language":[{"iso":"ger"}],"place":"Bernburg ","publication_status":"published","citation":{"short":"A. Lüttke Föller, K. Schwarzer, P. Wilhelm, U. Müller, in: B. Hoppe, Verein für Arznei- und Gewürzpflanzen Saluplanta (Eds.), 24. Bernburger Winterseminar Arznei- und Gewürzpflanzen : 18.02. - 19.02.2014 ; Tagungsbroschüre , Verein für Arznei- und Gewürzpflanzen Saluplanta , Bernburg , 2014.","chicago-de":"Lüttke Föller, A., Knut Schwarzer, Patrick Wilhelm und Ulrich Müller. 2014. Einfluss der Evakuierungsgeschwindigkeit auf die Majoranölverluste bei der Sattdampfbehandlung. In: 24. Bernburger Winterseminar Arznei- und Gewürzpflanzen : 18.02. - 19.02.2014 ; Tagungsbroschüre , hg. von Bernd Hoppe und Verein für Arznei- und Gewürzpflanzen Saluplanta . Bernburg : Verein für Arznei- und Gewürzpflanzen Saluplanta .","din1505-2-1":"Lüttke Föller, A. ; Schwarzer, Knut ; Wilhelm, Patrick ; Müller, Ulrich: Einfluss der Evakuierungsgeschwindigkeit auf die Majoranölverluste bei der Sattdampfbehandlung. In: Hoppe, B. ; Verein für Arznei- und Gewürzpflanzen Saluplanta (Hrsg.): 24. Bernburger Winterseminar Arznei- und Gewürzpflanzen : 18.02. - 19.02.2014 ; Tagungsbroschüre . Bernburg : Verein für Arznei- und Gewürzpflanzen Saluplanta , 2014","van":"Lüttke Föller A, Schwarzer K, Wilhelm P, Müller U. Einfluss der Evakuierungsgeschwindigkeit auf die Majoranölverluste bei der Sattdampfbehandlung. In: Hoppe B, Verein für Arznei- und Gewürzpflanzen Saluplanta , editors. 24 Bernburger Winterseminar Arznei- und Gewürzpflanzen : 1802 - 19022014 ; Tagungsbroschüre . Bernburg : Verein für Arznei- und Gewürzpflanzen Saluplanta ; 2014.","ufg":"Lüttke Föller, A. u. a.: Einfluss der Evakuierungsgeschwindigkeit auf die Majoranölverluste bei der Sattdampfbehandlung, in: Hoppe, Bernd, Verein für Arznei- und Gewürzpflanzen Saluplanta (Hgg.): 24. Bernburger Winterseminar Arznei- und Gewürzpflanzen : 18.02. - 19.02.2014 ; Tagungsbroschüre , Bernburg 2014.","mla":"Lüttke Föller, A., et al. “Einfluss der Evakuierungsgeschwindigkeit auf die Majoranölverluste bei der Sattdampfbehandlung.” 24. Bernburger Winterseminar Arznei- und Gewürzpflanzen : 18.02. - 19.02.2014 ; Tagungsbroschüre , edited by Bernd Hoppe and Verein für Arznei- und Gewürzpflanzen Saluplanta , Verein für Arznei- und Gewürzpflanzen Saluplanta , 2014.","havard":"A. Lüttke Föller, K. Schwarzer, P. Wilhelm, U. Müller, Einfluss der Evakuierungsgeschwindigkeit auf die Majoranölverluste bei der Sattdampfbehandlung, in: B. Hoppe, Verein für Arznei- und Gewürzpflanzen Saluplanta (Eds.), 24. Bernburger Winterseminar Arznei- und Gewürzpflanzen : 18.02. - 19.02.2014 ; Tagungsbroschüre , Verein für Arznei- und Gewürzpflanzen Saluplanta , Bernburg , 2014.","bjps":"Lüttke Föller A et al. (2014) Einfluss der Evakuierungsgeschwindigkeit auf die Majoranölverluste bei der Sattdampfbehandlung. In Hoppe B and Verein für Arznei- und Gewürzpflanzen Saluplanta (eds), 24. Bernburger Winterseminar Arznei- und Gewürzpflanzen : 18.02. - 19.02.2014 ; Tagungsbroschüre . Bernburg : Verein für Arznei- und Gewürzpflanzen Saluplanta .","apa":"Lüttke Föller, A., Schwarzer, K., Wilhelm, P., & Müller, U. (2014). Einfluss der Evakuierungsgeschwindigkeit auf die Majoranölverluste bei der Sattdampfbehandlung. In B. Hoppe & Verein für Arznei- und Gewürzpflanzen Saluplanta (Eds.), 24. Bernburger Winterseminar Arznei- und Gewürzpflanzen : 18.02. - 19.02.2014 ; Tagungsbroschüre . Verein für Arznei- und Gewürzpflanzen Saluplanta .","chicago":"Lüttke Föller, A., Knut Schwarzer, Patrick Wilhelm, and Ulrich Müller. “Einfluss der Evakuierungsgeschwindigkeit auf die Majoranölverluste bei der Sattdampfbehandlung.” In 24. Bernburger Winterseminar Arznei- und Gewürzpflanzen : 18.02. - 19.02.2014 ; Tagungsbroschüre , edited by Bernd Hoppe and Verein für Arznei- und Gewürzpflanzen Saluplanta . Bernburg : Verein für Arznei- und Gewürzpflanzen Saluplanta , 2014.","ama":"Lüttke Föller A, Schwarzer K, Wilhelm P, Müller U. Einfluss der Evakuierungsgeschwindigkeit auf die Majoranölverluste bei der Sattdampfbehandlung. In: Hoppe B, Verein für Arznei- und Gewürzpflanzen Saluplanta , eds. 24. Bernburger Winterseminar Arznei- und Gewürzpflanzen : 18.02. - 19.02.2014 ; Tagungsbroschüre . Verein für Arznei- und Gewürzpflanzen Saluplanta ; 2014.","ieee":"A. Lüttke Föller, K. Schwarzer, P. Wilhelm, and U. Müller, “Einfluss der Evakuierungsgeschwindigkeit auf die Majoranölverluste bei der Sattdampfbehandlung,” in 24. Bernburger Winterseminar Arznei- und Gewürzpflanzen : 18.02. - 19.02.2014 ; Tagungsbroschüre , Bernburg, 2014."},"title":"Einfluss der Evakuierungsgeschwindigkeit auf die Majoranölverluste bei der Sattdampfbehandlung","publisher":"Verein für Arznei- und Gewürzpflanzen Saluplanta ","status":"public","department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"conference":{"location":"Bernburg","name":"24. Bernburger Winterseminar für Arznei- und Gewürzpflanzen","start_date":"2014-02-18","end_date":"2014-02-19"},"author":[{"first_name":"A.","last_name":"Lüttke Föller","full_name":"Lüttke Föller, A."},{"first_name":"Knut","last_name":"Schwarzer","id":"13329","full_name":"Schwarzer, Knut"},{"id":"12013","last_name":"Wilhelm","first_name":"Patrick","full_name":"Wilhelm, Patrick"},{"id":"12119","last_name":"Müller","first_name":"Ulrich","full_name":"Müller, Ulrich"}],"year":"2014"},{"year":"2014","author":[{"last_name":"Dammann_","first_name":"Anna","id":"43899","full_name":"Dammann_, Anna"},{"full_name":"Schwarzer, Knut","first_name":"Knut","last_name":"Schwarzer","id":"13329"},{"full_name":"Müller, Ulrich","id":"12119","first_name":"Ulrich","last_name":"Müller"},{"orcid":"0000-0001-6401-8873","last_name":"Schneider","first_name":"Jan","id":"13209","full_name":"Schneider, Jan"}],"conference":{"location":"Freising","name":"ProcessNet-Tagung der Dechema und des VDI","start_date":"2014-02-26","end_date":"2014-02-28"},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"},{"_id":"DEP4018"}],"status":"public","title":"Simulation zur Flaschen-Vollpasteurisation - Simulation zur Flaschen-Vollpasteurisation","citation":{"short":"A. Dammann_, K. Schwarzer, U. Müller, J. Schneider, in: 2014.","din1505-2-1":"Dammann_, Anna ; Schwarzer, Knut ; Müller, Ulrich ; Schneider, Jan: Simulation zur Flaschen-Vollpasteurisation - Simulation zur Flaschen-Vollpasteurisation. In: , 2014","chicago-de":"Dammann_, Anna, Knut Schwarzer, Ulrich Müller und Jan Schneider. 2014. Simulation zur Flaschen-Vollpasteurisation - Simulation zur Flaschen-Vollpasteurisation. In: .","van":"Dammann_ A, Schwarzer K, Müller U, Schneider J. Simulation zur Flaschen-Vollpasteurisation - Simulation zur Flaschen-Vollpasteurisation. In 2014.","ama":"Dammann_ A, Schwarzer K, Müller U, Schneider J. Simulation zur Flaschen-Vollpasteurisation - Simulation zur Flaschen-Vollpasteurisation. In: ; 2014.","ufg":"Dammann_, Anna u. a.: Simulation zur Flaschen-Vollpasteurisation - Simulation zur Flaschen-Vollpasteurisation, in: o. Hg.: o. O. 2014.","havard":"A. Dammann_, K. Schwarzer, U. Müller, J. Schneider, Simulation zur Flaschen-Vollpasteurisation - Simulation zur Flaschen-Vollpasteurisation, in: 2014.","mla":"Dammann_, Anna, et al. Simulation zur Flaschen-Vollpasteurisation - Simulation zur Flaschen-Vollpasteurisation. 2014.","bjps":"Dammann_ A et al. (2014) Simulation zur Flaschen-Vollpasteurisation - Simulation zur Flaschen-Vollpasteurisation.","apa":"Dammann_, A., Schwarzer, K., Müller, U., & Schneider, J. (2014). Simulation zur Flaschen-Vollpasteurisation - Simulation zur Flaschen-Vollpasteurisation. ProcessNet-Tagung der Dechema und des VDI, Freising.","ieee":"A. Dammann_, K. Schwarzer, U. Müller, and J. Schneider, “Simulation zur Flaschen-Vollpasteurisation - Simulation zur Flaschen-Vollpasteurisation,” presented at the ProcessNet-Tagung der Dechema und des VDI, Freising, 2014.","chicago":"Dammann_, Anna, Knut Schwarzer, Ulrich Müller, and Jan Schneider. “Simulation zur Flaschen-Vollpasteurisation - Simulation zur Flaschen-Vollpasteurisation,” 2014."},"publication_status":"published","_id":"5449","language":[{"iso":"ger"}],"date_created":"2021-04-08T09:05:32Z","type":"conference","user_id":"83779","date_updated":"2024-05-24T07:59:23Z"},{"type":"conference","date_created":"2021-04-08T09:09:09Z","date_updated":"2023-03-15T13:49:59Z","user_id":"45673","_id":"5450","language":[{"iso":"ger"}],"title":"Wärmeübergang bei der dynamischen Gefriertrocknung in Feststoffmischern","publication_status":"published","citation":{"ama":"Pliske R, Müller U, Kohlus R. Wärmeübergang bei der dynamischen Gefriertrocknung in Feststoffmischern. In: ; 2014.","ieee":"R. Pliske, U. Müller, and R. Kohlus, “Wärmeübergang bei der dynamischen Gefriertrocknung in Feststoffmischern,” presented at the ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik, Freising, 2014.","ufg":"Pliske, Roland et. al. (2014): Wärmeübergang bei der dynamischen Gefriertrocknung in Feststoffmischern, in: .","havard":"R. Pliske, U. Müller, R. Kohlus, Wärmeübergang bei der dynamischen Gefriertrocknung in Feststoffmischern, in: 2014.","mla":"Pliske, Roland, et al. Wärmeübergang bei der dynamischen Gefriertrocknung in Feststoffmischern. 2014.","bjps":"Pliske R, Müller U and Kohlus R (2014) Wärmeübergang bei der dynamischen Gefriertrocknung in Feststoffmischern.","van":"Pliske R, Müller U, Kohlus R. Wärmeübergang bei der dynamischen Gefriertrocknung in Feststoffmischern. In 2014.","chicago":"Pliske, Roland, Ulrich Müller, and R: Kohlus. “Wärmeübergang bei der dynamischen Gefriertrocknung in Feststoffmischern,” 2014.","apa":"Pliske, R., Müller, U., & Kohlus, R. (2014). Wärmeübergang bei der dynamischen Gefriertrocknung in Feststoffmischern. Presented at the ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik, Freising.","chicago-de":"Pliske, Roland, Ulrich Müller und R: Kohlus. 2014. Wärmeübergang bei der dynamischen Gefriertrocknung in Feststoffmischern. In: .","din1505-2-1":"Pliske, Roland ; Müller, Ulrich ; Kohlus, R: Wärmeübergang bei der dynamischen Gefriertrocknung in Feststoffmischern. In: , 2014","short":"R. Pliske, U. Müller, R. Kohlus, in: 2014."},"conference":{"name":"ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik","location":"Freising","end_date":"2014-02-28","start_date":"2014-02-26"},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"year":2014,"author":[{"first_name":"Roland","last_name":"Pliske","full_name":"Pliske, Roland","id":"12864"},{"first_name":"Ulrich","id":"12119","full_name":"Müller, Ulrich","last_name":"Müller"},{"last_name":"Kohlus","first_name":"R:","full_name":"Kohlus, R:"}],"status":"public"},{"language":[{"iso":"ger"}],"_id":"5451","date_created":"2021-04-08T09:12:18Z","type":"conference","publication":"ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik, Freising, 26.-28.02.2014","date_updated":"2023-03-15T13:49:59Z","user_id":"15514","department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"conference":{"name":"ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik","location":"Freising","start_date":"2014-02-26","end_date":"2014-02-28"},"year":2014,"author":[{"full_name":"Hüttemann, N.","last_name":"Hüttemann","first_name":"N."},{"full_name":"Schwarzer, Knut","last_name":"Schwarzer","first_name":"Knut","id":"13329"},{"first_name":"Patrick","last_name":"Wilhelm","id":"12013","full_name":"Wilhelm, Patrick"},{"last_name":"Müller","first_name":"Ulrich","full_name":"Müller, Ulrich","id":"12119"}],"status":"public","title":"Untersuchung zur Zerstörung der ätherischen Ölzellen bei der Sattdampfbehandlung von Planzenmaterial","publication_status":"published","citation":{"van":"Hüttemann N, Schwarzer K, Wilhelm P, Müller U. Untersuchung zur Zerstörung der ätherischen Ölzellen bei der Sattdampfbehandlung von Planzenmaterial. In: ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik, Freising, 26-28022014. 2014.","ama":"Hüttemann N, Schwarzer K, Wilhelm P, Müller U. Untersuchung zur Zerstörung der ätherischen Ölzellen bei der Sattdampfbehandlung von Planzenmaterial. In: ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik, Freising, 26.-28.02.2014. ; 2014.","ufg":"Hüttemann, N. et. al. (2014): Untersuchung zur Zerstörung der ätherischen Ölzellen bei der Sattdampfbehandlung von Planzenmaterial, in: ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik, Freising, 26.-28.02.2014.","mla":"Hüttemann, N., et al. “Untersuchung zur Zerstörung der ätherischen Ölzellen bei der Sattdampfbehandlung von Planzenmaterial.” ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik, Freising, 26.-28.02.2014, 2014.","havard":"N. Hüttemann, K. Schwarzer, P. Wilhelm, U. Müller, Untersuchung zur Zerstörung der ätherischen Ölzellen bei der Sattdampfbehandlung von Planzenmaterial, in: ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik, Freising, 26.-28.02.2014, 2014.","bjps":"Hüttemann N et al. (2014) Untersuchung zur Zerstörung der ätherischen Ölzellen bei der Sattdampfbehandlung von Planzenmaterial. ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik, Freising, 26.-28.02.2014.","apa":"Hüttemann, N., Schwarzer, K., Wilhelm, P., & Müller, U. (2014). Untersuchung zur Zerstörung der ätherischen Ölzellen bei der Sattdampfbehandlung von Planzenmaterial. In ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik, Freising, 26.-28.02.2014. Freising.","ieee":"N. Hüttemann, K. Schwarzer, P. Wilhelm, and U. Müller, “Untersuchung zur Zerstörung der ätherischen Ölzellen bei der Sattdampfbehandlung von Planzenmaterial,” in ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik, Freising, 26.-28.02.2014, Freising, 2014.","chicago":"Hüttemann, N., Knut Schwarzer, Patrick Wilhelm, and Ulrich Müller. “Untersuchung zur Zerstörung der ätherischen Ölzellen bei der Sattdampfbehandlung von Planzenmaterial.” In ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik, Freising, 26.-28.02.2014, 2014.","short":"N. Hüttemann, K. Schwarzer, P. Wilhelm, U. Müller, in: ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik, Freising, 26.-28.02.2014, 2014.","din1505-2-1":"Hüttemann, N. ; Schwarzer, Knut ; Wilhelm, Patrick ; Müller, Ulrich: Untersuchung zur Zerstörung der ätherischen Ölzellen bei der Sattdampfbehandlung von Planzenmaterial. In: ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik, Freising, 26.-28.02.2014, 2014","chicago-de":"Hüttemann, N., Knut Schwarzer, Patrick Wilhelm und Ulrich Müller. 2014. Untersuchung zur Zerstörung der ätherischen Ölzellen bei der Sattdampfbehandlung von Planzenmaterial. In: ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik, Freising, 26.-28.02.2014."}},{"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"conference":{"start_date":"2014-02-26","end_date":"2014-02-28","location":"Freising","name":"Jahrestrefffen der ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik"},"author":[{"last_name":"Lüttke Föller","first_name":"A.","full_name":"Lüttke Föller, A."},{"last_name":"Schwarzer","first_name":"Knut","id":"13329","full_name":"Schwarzer, Knut"},{"first_name":"Patrick","last_name":"Wilhelm","id":"12013","full_name":"Wilhelm, Patrick"},{"first_name":"Ulrich","full_name":"Müller, Ulrich","last_name":"Müller","id":"12119"}],"year":"2014","status":"public","title":"Einfluss der Evakuierungsgeschwindigkeit auf die Majoranölverluste bei der Sattdampfbehandlung","publication_status":"published","citation":{"ama":"Lüttke Föller A, Schwarzer K, Wilhelm P, Müller U. Einfluss der Evakuierungsgeschwindigkeit auf die Majoranölverluste bei der Sattdampfbehandlung. In: ; 2014.","ieee":"A. Lüttke Föller, K. Schwarzer, P. Wilhelm, and U. Müller, “Einfluss der Evakuierungsgeschwindigkeit auf die Majoranölverluste bei der Sattdampfbehandlung,” presented at the Jahrestrefffen der ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik, Freising, 2014.","bjps":"Lüttke Föller A et al. (2014) Einfluss der Evakuierungsgeschwindigkeit auf die Majoranölverluste bei der Sattdampfbehandlung.","havard":"A. Lüttke Föller, K. Schwarzer, P. Wilhelm, U. Müller, Einfluss der Evakuierungsgeschwindigkeit auf die Majoranölverluste bei der Sattdampfbehandlung, in: 2014.","mla":"Lüttke Föller, A., et al. Einfluss der Evakuierungsgeschwindigkeit auf die Majoranölverluste bei der Sattdampfbehandlung. 2014.","ufg":"Lüttke Föller, A. u. a.: Einfluss der Evakuierungsgeschwindigkeit auf die Majoranölverluste bei der Sattdampfbehandlung, in: o. Hg.: o. O. 2014.","van":"Lüttke Föller A, Schwarzer K, Wilhelm P, Müller U. Einfluss der Evakuierungsgeschwindigkeit auf die Majoranölverluste bei der Sattdampfbehandlung. In 2014.","chicago":"Lüttke Föller, A., Knut Schwarzer, Patrick Wilhelm, and Ulrich Müller. “Einfluss der Evakuierungsgeschwindigkeit auf die Majoranölverluste bei der Sattdampfbehandlung,” 2014.","apa":"Lüttke Föller, A., Schwarzer, K., Wilhelm, P., & Müller, U. (2014). Einfluss der Evakuierungsgeschwindigkeit auf die Majoranölverluste bei der Sattdampfbehandlung. Jahrestrefffen der ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik, Freising.","din1505-2-1":"Lüttke Föller, A. ; Schwarzer, Knut ; Wilhelm, Patrick ; Müller, Ulrich: Einfluss der Evakuierungsgeschwindigkeit auf die Majoranölverluste bei der Sattdampfbehandlung. In: , 2014","chicago-de":"Lüttke Föller, A., Knut Schwarzer, Patrick Wilhelm und Ulrich Müller. 2014. Einfluss der Evakuierungsgeschwindigkeit auf die Majoranölverluste bei der Sattdampfbehandlung. In: .","short":"A. Lüttke Föller, K. Schwarzer, P. Wilhelm, U. Müller, in: 2014."},"language":[{"iso":"ger"}],"_id":"5452","date_created":"2021-04-08T09:02:13Z","type":"conference_abstract","date_updated":"2024-10-30T08:07:29Z","user_id":"83781"},{"conference":{"start_date":"2014-02-26","end_date":"2014-02-28","name":"GDL-Kongress Lebensmitteltechnologie ","location":"Frankfurt-Rodgau"},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"year":2014,"author":[{"id":"58799","last_name":"Cornu","full_name":"Cornu, Jesahel","first_name":"Jesahel"},{"full_name":"Lüttke Föller, A.","first_name":"A.","last_name":"Lüttke Föller"},{"first_name":"Patrick","full_name":"Wilhelm, Patrick","last_name":"Wilhelm","id":"12013"},{"last_name":"Müller","first_name":"Ulrich","id":"12119","full_name":"Müller, Ulrich"}],"status":"public","title":"Wirksame Kondensatfilmdicke bei der mechanischen Sattdampfentkeimung von pflanzlichen Materialien","publication_status":"published","citation":{"ufg":"Cornu, Jesahel et. al. (2014): Wirksame Kondensatfilmdicke bei der mechanischen Sattdampfentkeimung von pflanzlichen Materialien, in: .","bjps":"Cornu J et al. (2014) Wirksame Kondensatfilmdicke bei der mechanischen Sattdampfentkeimung von pflanzlichen Materialien.","havard":"J. Cornu, A. Lüttke Föller, P. Wilhelm, U. Müller, Wirksame Kondensatfilmdicke bei der mechanischen Sattdampfentkeimung von pflanzlichen Materialien, in: 2014.","mla":"Cornu, Jesahel, et al. Wirksame Kondensatfilmdicke bei der mechanischen Sattdampfentkeimung von pflanzlichen Materialien. 2014.","van":"Cornu J, Lüttke Föller A, Wilhelm P, Müller U. Wirksame Kondensatfilmdicke bei der mechanischen Sattdampfentkeimung von pflanzlichen Materialien. In 2014.","ama":"Cornu J, Lüttke Föller A, Wilhelm P, Müller U. Wirksame Kondensatfilmdicke bei der mechanischen Sattdampfentkeimung von pflanzlichen Materialien. In: ; 2014.","chicago":"Cornu, Jesahel, A. Lüttke Föller, Patrick Wilhelm, and Ulrich Müller. “Wirksame Kondensatfilmdicke bei der mechanischen Sattdampfentkeimung von pflanzlichen Materialien,” 2014.","apa":"Cornu, J., Lüttke Föller, A., Wilhelm, P., & Müller, U. (2014). Wirksame Kondensatfilmdicke bei der mechanischen Sattdampfentkeimung von pflanzlichen Materialien. Presented at the GDL-Kongress Lebensmitteltechnologie , Frankfurt-Rodgau.","ieee":"J. Cornu, A. Lüttke Föller, P. Wilhelm, and U. Müller, “Wirksame Kondensatfilmdicke bei der mechanischen Sattdampfentkeimung von pflanzlichen Materialien,” presented at the GDL-Kongress Lebensmitteltechnologie , Frankfurt-Rodgau, 2014.","din1505-2-1":"Cornu, Jesahel ; Lüttke Föller, A. ; Wilhelm, Patrick ; Müller, Ulrich: Wirksame Kondensatfilmdicke bei der mechanischen Sattdampfentkeimung von pflanzlichen Materialien. In: , 2014","chicago-de":"Cornu, Jesahel, A. Lüttke Föller, Patrick Wilhelm und Ulrich Müller. 2014. Wirksame Kondensatfilmdicke bei der mechanischen Sattdampfentkeimung von pflanzlichen Materialien. In: .","short":"J. Cornu, A. Lüttke Föller, P. Wilhelm, U. Müller, in: 2014."},"_id":"5453","language":[{"iso":"ger"}],"date_created":"2021-04-08T09:17:09Z","type":"conference","date_updated":"2023-03-15T13:49:59Z","user_id":"45673"},{"language":[{"iso":"ger"}],"_id":"5454","publication":" \tFortbildungsseminar des Bundesverbandes der Deutschen Fleischwarenindustrie (BVDF), Rheinhardsbrunn, 15./16.03.2013 und 13./14.03.2014","date_created":"2021-04-08T09:22:14Z","type":"conference","user_id":"79260","date_updated":"2023-03-15T13:49:59Z","author":[{"id":"12235","full_name":"Stiebing, Achim","first_name":"Achim","last_name":"Stiebing"}],"year":2014,"department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"conference":{"start_date":"2014-03-13","end_date":"2014-03-14","name":"Fortbildungsseminar des Bundesverbandes der Deutschen Fleischwarenindustrie (BVDF)","location":"Rheinhardsbrunn"},"status":"public","title":"Technologien zur Herstellung von Kochschinken und Kochwurst. Neue Zutaten und Zusatzstoffe, Chancen, Grenzen und Technologien. Betriebliche QS-Konzepte für die Roh- und Brühwurstherstellung","citation":{"short":"A. Stiebing, in: Fortbildungsseminar des Bundesverbandes der Deutschen Fleischwarenindustrie (BVDF), Rheinhardsbrunn, 15./16.03.2013 und 13./14.03.2014, 2014.","din1505-2-1":"Stiebing, Achim: Technologien zur Herstellung von Kochschinken und Kochwurst. Neue Zutaten und Zusatzstoffe, Chancen, Grenzen und Technologien. Betriebliche QS-Konzepte für die Roh- und Brühwurstherstellung. In: Fortbildungsseminar des Bundesverbandes der Deutschen Fleischwarenindustrie (BVDF), Rheinhardsbrunn, 15./16.03.2013 und 13./14.03.2014, 2014","chicago-de":"Stiebing, Achim. 2014. Technologien zur Herstellung von Kochschinken und Kochwurst. Neue Zutaten und Zusatzstoffe, Chancen, Grenzen und Technologien. Betriebliche QS-Konzepte für die Roh- und Brühwurstherstellung. In: Fortbildungsseminar des Bundesverbandes der Deutschen Fleischwarenindustrie (BVDF), Rheinhardsbrunn, 15./16.03.2013 und 13./14.03.2014.","van":"Stiebing A. Technologien zur Herstellung von Kochschinken und Kochwurst. Neue Zutaten und Zusatzstoffe, Chancen, Grenzen und Technologien. Betriebliche QS-Konzepte für die Roh- und Brühwurstherstellung. In: Fortbildungsseminar des Bundesverbandes der Deutschen Fleischwarenindustrie (BVDF), Rheinhardsbrunn, 15/16032013 und 13/14032014. 2014.","ama":"Stiebing A. Technologien zur Herstellung von Kochschinken und Kochwurst. Neue Zutaten und Zusatzstoffe, Chancen, Grenzen und Technologien. Betriebliche QS-Konzepte für die Roh- und Brühwurstherstellung. In: Fortbildungsseminar des Bundesverbandes der Deutschen Fleischwarenindustrie (BVDF), Rheinhardsbrunn, 15./16.03.2013 und 13./14.03.2014. ; 2014.","ufg":"Stiebing, Achim (2014): Technologien zur Herstellung von Kochschinken und Kochwurst. Neue Zutaten und Zusatzstoffe, Chancen, Grenzen und Technologien. Betriebliche QS-Konzepte für die Roh- und Brühwurstherstellung, in: Fortbildungsseminar des Bundesverbandes der Deutschen Fleischwarenindustrie (BVDF), Rheinhardsbrunn, 15./16.03.2013 und 13./14.03.2014.","havard":"A. Stiebing, Technologien zur Herstellung von Kochschinken und Kochwurst. Neue Zutaten und Zusatzstoffe, Chancen, Grenzen und Technologien. Betriebliche QS-Konzepte für die Roh- und Brühwurstherstellung, in: Fortbildungsseminar des Bundesverbandes der Deutschen Fleischwarenindustrie (BVDF), Rheinhardsbrunn, 15./16.03.2013 und 13./14.03.2014, 2014.","mla":"Stiebing, Achim. “Technologien zur Herstellung von Kochschinken und Kochwurst. Neue Zutaten und Zusatzstoffe, Chancen, Grenzen und Technologien. Betriebliche QS-Konzepte für die Roh- und Brühwurstherstellung.” Fortbildungsseminar des Bundesverbandes der Deutschen Fleischwarenindustrie (BVDF), Rheinhardsbrunn, 15./16.03.2013 und 13./14.03.2014, 2014.","bjps":"Stiebing A (2014) Technologien zur Herstellung von Kochschinken und Kochwurst. Neue Zutaten und Zusatzstoffe, Chancen, Grenzen und Technologien. Betriebliche QS-Konzepte für die Roh- und Brühwurstherstellung. Fortbildungsseminar des Bundesverbandes der Deutschen Fleischwarenindustrie (BVDF), Rheinhardsbrunn, 15./16.03.2013 und 13./14.03.2014.","apa":"Stiebing, A. (2014). Technologien zur Herstellung von Kochschinken und Kochwurst. Neue Zutaten und Zusatzstoffe, Chancen, Grenzen und Technologien. Betriebliche QS-Konzepte für die Roh- und Brühwurstherstellung. In Fortbildungsseminar des Bundesverbandes der Deutschen Fleischwarenindustrie (BVDF), Rheinhardsbrunn, 15./16.03.2013 und 13./14.03.2014. Rheinhardsbrunn.","ieee":"A. Stiebing, “Technologien zur Herstellung von Kochschinken und Kochwurst. Neue Zutaten und Zusatzstoffe, Chancen, Grenzen und Technologien. Betriebliche QS-Konzepte für die Roh- und Brühwurstherstellung,” in Fortbildungsseminar des Bundesverbandes der Deutschen Fleischwarenindustrie (BVDF), Rheinhardsbrunn, 15./16.03.2013 und 13./14.03.2014, Rheinhardsbrunn, 2014.","chicago":"Stiebing, Achim. “Technologien zur Herstellung von Kochschinken und Kochwurst. Neue Zutaten und Zusatzstoffe, Chancen, Grenzen und Technologien. Betriebliche QS-Konzepte für die Roh- und Brühwurstherstellung.” In Fortbildungsseminar des Bundesverbandes der Deutschen Fleischwarenindustrie (BVDF), Rheinhardsbrunn, 15./16.03.2013 und 13./14.03.2014, 2014."},"publication_status":"published"},{"language":[{"iso":"eng"}],"_id":"5455","publication":"10th European Bioethanol and Bioconversion Technology Meeting, Detmold, 08.04.2014","date_created":"2021-04-08T09:26:08Z","type":"conference","user_id":"83779","date_updated":"2024-05-24T08:03:30Z","author":[{"id":"43927","full_name":"Broeker, Timo","first_name":"Timo","last_name":"Broeker"},{"full_name":"Blöhse, D.","last_name":"Blöhse","first_name":"D."},{"full_name":"Bittner, J.","first_name":"J.","last_name":"Bittner"},{"first_name":"Hans-Günter","last_name":"Ramke","id":"21006","full_name":"Ramke, Hans-Günter"},{"orcid":"0000-0001-6401-8873","id":"13209","last_name":"Schneider","full_name":"Schneider, Jan","first_name":"Jan"}],"year":"2014","conference":{"start_date":"2014-04-08","location":"Detmold","name":"10th European Bioethanol and Bioconversion Technology Meeting"},"department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"status":"public","title":"How to extend a distillery into a lignocellulose biorefinery – Material - & Energy Flow Management of Bioethanol, Biogas & HTC Biochar","citation":{"chicago-de":"Broeker, Timo, D. Blöhse, J. Bittner, Hans-Günter Ramke und Jan Schneider. 2014. How to extend a distillery into a lignocellulose biorefinery – Material - & Energy Flow Management of Bioethanol, Biogas & HTC Biochar. In: 10th European Bioethanol and Bioconversion Technology Meeting, Detmold, 08.04.2014.","din1505-2-1":"Broeker, Timo ; Blöhse, D. ; Bittner, J. ; Ramke, Hans-Günter ; Schneider, Jan: How to extend a distillery into a lignocellulose biorefinery – Material - & Energy Flow Management of Bioethanol, Biogas & HTC Biochar. In: 10th European Bioethanol and Bioconversion Technology Meeting, Detmold, 08.04.2014, 2014","short":"T. Broeker, D. Blöhse, J. Bittner, H.-G. Ramke, J. Schneider, in: 10th European Bioethanol and Bioconversion Technology Meeting, Detmold, 08.04.2014, 2014.","mla":"Broeker, Timo, et al. “How to Extend a Distillery into a Lignocellulose Biorefinery – Material - & Energy Flow Management of Bioethanol, Biogas & HTC Biochar.” 10th European Bioethanol and Bioconversion Technology Meeting, Detmold, 08.04.2014, 2014.","bjps":"Broeker T et al. (2014) How to Extend a Distillery into a Lignocellulose Biorefinery – Material - & Energy Flow Management of Bioethanol, Biogas & HTC Biochar. 10th European Bioethanol and Bioconversion Technology Meeting, Detmold, 08.04.2014.","havard":"T. Broeker, D. Blöhse, J. Bittner, H.-G. Ramke, J. Schneider, How to extend a distillery into a lignocellulose biorefinery – Material - & Energy Flow Management of Bioethanol, Biogas & HTC Biochar, in: 10th European Bioethanol and Bioconversion Technology Meeting, Detmold, 08.04.2014, 2014.","ufg":"Broeker, Timo u. a.: How to extend a distillery into a lignocellulose biorefinery – Material - & Energy Flow Management of Bioethanol, Biogas & HTC Biochar, in: o. Hg.: 10th European Bioethanol and Bioconversion Technology Meeting, Detmold, 08.04.2014, o. O. 2014.","van":"Broeker T, Blöhse D, Bittner J, Ramke HG, Schneider J. How to extend a distillery into a lignocellulose biorefinery – Material - & Energy Flow Management of Bioethanol, Biogas & HTC Biochar. In: 10th European Bioethanol and Bioconversion Technology Meeting, Detmold, 08042014. 2014.","chicago":"Broeker, Timo, D. Blöhse, J. Bittner, Hans-Günter Ramke, and Jan Schneider. “How to Extend a Distillery into a Lignocellulose Biorefinery – Material - & Energy Flow Management of Bioethanol, Biogas & HTC Biochar.” In 10th European Bioethanol and Bioconversion Technology Meeting, Detmold, 08.04.2014, 2014.","apa":"Broeker, T., Blöhse, D., Bittner, J., Ramke, H.-G., & Schneider, J. (2014). How to extend a distillery into a lignocellulose biorefinery – Material - & Energy Flow Management of Bioethanol, Biogas & HTC Biochar. 10th European Bioethanol and Bioconversion Technology Meeting, Detmold, 08.04.2014. 10th European Bioethanol and Bioconversion Technology Meeting, Detmold.","ama":"Broeker T, Blöhse D, Bittner J, Ramke HG, Schneider J. How to extend a distillery into a lignocellulose biorefinery – Material - & Energy Flow Management of Bioethanol, Biogas & HTC Biochar. In: 10th European Bioethanol and Bioconversion Technology Meeting, Detmold, 08.04.2014. ; 2014.","ieee":"T. Broeker, D. Blöhse, J. Bittner, H.-G. Ramke, and J. Schneider, “How to extend a distillery into a lignocellulose biorefinery – Material - & Energy Flow Management of Bioethanol, Biogas & HTC Biochar,” presented at the 10th European Bioethanol and Bioconversion Technology Meeting, Detmold, 2014."},"publication_status":"published"},{"publication_status":"published","citation":{"chicago-de":"Stiebing, Achim. 2014. Fleisch und Fleischerzeugnisse im Kreuzfeuer der Kritik. In: Rotary Lemgo, 14.04.2014.","din1505-2-1":"Stiebing, Achim: Fleisch und Fleischerzeugnisse im Kreuzfeuer der Kritik. In: Rotary Lemgo, 14.04.2014, 2014","short":"A. Stiebing, in: Rotary Lemgo, 14.04.2014, 2014.","ufg":"Stiebing, Achim (2014): Fleisch und Fleischerzeugnisse im Kreuzfeuer der Kritik, in: Rotary Lemgo, 14.04.2014.","mla":"Stiebing, Achim. “Fleisch und Fleischerzeugnisse im Kreuzfeuer der Kritik.” Rotary Lemgo, 14.04.2014, 2014.","bjps":"Stiebing A (2014) Fleisch und Fleischerzeugnisse im Kreuzfeuer der Kritik. Rotary Lemgo, 14.04.2014.","havard":"A. Stiebing, Fleisch und Fleischerzeugnisse im Kreuzfeuer der Kritik, in: Rotary Lemgo, 14.04.2014, 2014.","van":"Stiebing A. Fleisch und Fleischerzeugnisse im Kreuzfeuer der Kritik. In: Rotary Lemgo, 14042014. 2014.","chicago":"Stiebing, Achim. “Fleisch und Fleischerzeugnisse im Kreuzfeuer der Kritik.” In Rotary Lemgo, 14.04.2014, 2014.","apa":"Stiebing, A. (2014). Fleisch und Fleischerzeugnisse im Kreuzfeuer der Kritik. In Rotary Lemgo, 14.04.2014. Lemgo.","ama":"Stiebing A. Fleisch und Fleischerzeugnisse im Kreuzfeuer der Kritik. In: Rotary Lemgo, 14.04.2014. ; 2014.","ieee":"A. Stiebing, “Fleisch und Fleischerzeugnisse im Kreuzfeuer der Kritik,” in Rotary Lemgo, 14.04.2014, Lemgo, 2014."},"title":"Fleisch und Fleischerzeugnisse im Kreuzfeuer der Kritik","status":"public","conference":{"location":"Lemgo","name":"Rotary ","start_date":"2014-04-14"},"department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"year":2014,"author":[{"first_name":"Achim","id":"12235","last_name":"Stiebing","full_name":"Stiebing, Achim"}],"date_updated":"2023-03-15T13:49:59Z","user_id":"79260","date_created":"2021-04-08T09:28:45Z","type":"conference","publication":"Rotary Lemgo, 14.04.2014","language":[{"iso":"ger"}],"_id":"5456"},{"date_updated":"2023-03-15T13:49:59Z","user_id":"15514","date_created":"2021-04-08T09:32:15Z","type":"conference","publication":"11th International Trends in Brewing, Ghent (Belgium), April 13th-17th 2014","_id":"5458","language":[{"iso":"eng"}],"publication_status":"published","citation":{"short":"J. Schneider, K. Schwarzer, A. Dammann, U. Müller, in: 11th International Trends in Brewing, Ghent (Belgium), April 13th-17th 2014, 2014.","din1505-2-1":"Schneider, Jan ; Schwarzer, Knut ; Dammann, Anna ; Müller, Ulrich: Effect of residence time distribution in flash pasteurizers on the thermal death oEffect of the residence time distribution in flash pasteurizers on the thermal death of microorganism under consideration of the heating and cooling sectionsf microorganisms. In: 11th International Trends in Brewing, Ghent (Belgium), April 13th-17th 2014, 2014","chicago-de":"Schneider, Jan, Knut Schwarzer, Anna Dammann und Ulrich Müller. 2014. Effect of residence time distribution in flash pasteurizers on the thermal death oEffect of the residence time distribution in flash pasteurizers on the thermal death of microorganism under consideration of the heating and cooling sectionsf microorganisms. In: 11th International Trends in Brewing, Ghent (Belgium), April 13th-17th 2014.","apa":"Schneider, J., Schwarzer, K., Dammann, A., & Müller, U. (2014). Effect of residence time distribution in flash pasteurizers on the thermal death oEffect of the residence time distribution in flash pasteurizers on the thermal death of microorganism under consideration of the heating and cooling sectionsf microorganisms. In 11th International Trends in Brewing, Ghent (Belgium), April 13th-17th 2014. Ghent (Belgium).","chicago":"Schneider, Jan, Knut Schwarzer, Anna Dammann, and Ulrich Müller. “Effect of Residence Time Distribution in Flash Pasteurizers on the Thermal Death OEffect of the Residence Time Distribution in Flash Pasteurizers on the Thermal Death of Microorganism under Consideration of the Heating and Cooling Sectionsf Microorganisms.” In 11th International Trends in Brewing, Ghent (Belgium), April 13th-17th 2014, 2014.","van":"Schneider J, Schwarzer K, Dammann A, Müller U. Effect of residence time distribution in flash pasteurizers on the thermal death oEffect of the residence time distribution in flash pasteurizers on the thermal death of microorganism under consideration of the heating and cooling sectionsf microorganisms. In: 11th International Trends in Brewing, Ghent (Belgium), April 13th-17th 2014. 2014.","ufg":"Schneider, Jan et. al. (2014): Effect of residence time distribution in flash pasteurizers on the thermal death oEffect of the residence time distribution in flash pasteurizers on the thermal death of microorganism under consideration of the heating and cooling sectionsf microorganisms, in: 11th International Trends in Brewing, Ghent (Belgium), April 13th-17th 2014.","havard":"J. Schneider, K. Schwarzer, A. Dammann, U. Müller, Effect of residence time distribution in flash pasteurizers on the thermal death oEffect of the residence time distribution in flash pasteurizers on the thermal death of microorganism under consideration of the heating and cooling sectionsf microorganisms, in: 11th International Trends in Brewing, Ghent (Belgium), April 13th-17th 2014, 2014.","bjps":"Schneider J et al. (2014) Effect of Residence Time Distribution in Flash Pasteurizers on the Thermal Death OEffect of the Residence Time Distribution in Flash Pasteurizers on the Thermal Death of Microorganism under Consideration of the Heating and Cooling Sectionsf Microorganisms. 11th International Trends in Brewing, Ghent (Belgium), April 13th-17th 2014.","mla":"Schneider, Jan, et al. “Effect of Residence Time Distribution in Flash Pasteurizers on the Thermal Death OEffect of the Residence Time Distribution in Flash Pasteurizers on the Thermal Death of Microorganism under Consideration of the Heating and Cooling Sectionsf Microorganisms.” 11th International Trends in Brewing, Ghent (Belgium), April 13th-17th 2014, 2014.","ieee":"J. Schneider, K. Schwarzer, A. Dammann, and U. Müller, “Effect of residence time distribution in flash pasteurizers on the thermal death oEffect of the residence time distribution in flash pasteurizers on the thermal death of microorganism under consideration of the heating and cooling sectionsf microorganisms,” in 11th International Trends in Brewing, Ghent (Belgium), April 13th-17th 2014, Ghent (Belgium), 2014.","ama":"Schneider J, Schwarzer K, Dammann A, Müller U. Effect of residence time distribution in flash pasteurizers on the thermal death oEffect of the residence time distribution in flash pasteurizers on the thermal death of microorganism under consideration of the heating and cooling sectionsf microorganisms. In: 11th International Trends in Brewing, Ghent (Belgium), April 13th-17th 2014. ; 2014."},"title":"Effect of residence time distribution in flash pasteurizers on the thermal death oEffect of the residence time distribution in flash pasteurizers on the thermal death of microorganism under consideration of the heating and cooling sectionsf microorganisms","status":"public","conference":{"location":"Ghent (Belgium)","name":"11th International Trends in Brewing","end_date":"2014-04-17","start_date":"2014-04-13"},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"year":2014,"author":[{"last_name":"Schneider","first_name":"Jan","full_name":"Schneider, Jan","id":"13209"},{"full_name":"Schwarzer, Knut","last_name":"Schwarzer","id":"13329","first_name":"Knut"},{"full_name":"Dammann, Anna","first_name":"Anna","last_name":"Dammann"},{"first_name":"Ulrich","last_name":"Müller","id":"12119","full_name":"Müller, Ulrich"}]},{"author":[{"first_name":"Jürgen","id":"12568","last_name":"Zapp","full_name":"Zapp, Jürgen"},{"id":"43951","first_name":"Achim","last_name":"Kothe","full_name":"Kothe, Achim"},{"first_name":"J.","full_name":"Münstermann, J.","last_name":"Münstermann"}],"main_file_link":[{"url":"http://www.labo.de/epaper/labo010214/blaetterkatalog/index.html"}],"year":"2014","department":[{"_id":"DEP4023"},{"_id":"DEP4026"}],"issue":"1-2","status":"public","page":"12-14","title":"Welche Stoffe in harten Getränken?","citation":{"short":"J. Zapp, A. Kothe, J. Münstermann, LABO – Fit for Lab (2014) 12–14.","din1505-2-1":"Zapp, Jürgen ; Kothe, Achim ; Münstermann, J.: Welche Stoffe in harten Getränken? In: LABO – Fit for Lab (2014), Nr. 1–2, S. 12–14","chicago-de":"Zapp, Jürgen, Achim Kothe und J. Münstermann. 2014. Welche Stoffe in harten Getränken? LABO – Fit for Lab, Nr. 1–2: 12–14.","ieee":"J. Zapp, A. Kothe, and J. Münstermann, “Welche Stoffe in harten Getränken?,” LABO – Fit for Lab, no. 1–2, pp. 12–14, 2014.","apa":"Zapp, J., Kothe, A., & Münstermann, J. (2014). Welche Stoffe in harten Getränken? LABO – Fit for Lab, 1–2, 12–14.","chicago":"Zapp, Jürgen, Achim Kothe, and J. Münstermann. “Welche Stoffe in harten Getränken?” LABO – Fit for Lab, no. 1–2 (2014): 12–14.","ama":"Zapp J, Kothe A, Münstermann J. Welche Stoffe in harten Getränken? LABO – Fit for Lab. 2014;(1-2):12-14.","van":"Zapp J, Kothe A, Münstermann J. Welche Stoffe in harten Getränken? LABO – Fit for Lab. 2014;(1–2):12–4.","bjps":"Zapp J, Kothe A and Münstermann J (2014) Welche Stoffe in harten Getränken? LABO – Fit for Lab 12–14.","havard":"J. Zapp, A. Kothe, J. Münstermann, Welche Stoffe in harten Getränken?, LABO – Fit for Lab. (2014) 12–14.","mla":"Zapp, Jürgen, et al. “Welche Stoffe in harten Getränken?” LABO – Fit for Lab, no. 1–2, 2014, pp. 12–14.","ufg":"Zapp, Jürgen/Kothe, Achim/Münstermann, J.: Welche Stoffe in harten Getränken?, in: LABO – Fit for Lab (2014), H. 1–2, S. 12–14."},"publication_status":"published","language":[{"iso":"ger"}],"_id":"5460","publication":"LABO – Fit for Lab","publication_identifier":{"issn":["0344-5208 "]},"type":"journal_article","date_created":"2021-04-08T09:50:10Z","user_id":"83781","date_updated":"2024-05-21T06:32:43Z"},{"language":[{"iso":"ger"}],"_id":"5462","doi":"10.1002/lemi.201490056","user_id":"83779","date_updated":"2024-05-24T08:20:15Z","intvolume":" 68","publication":"Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker","publication_identifier":{"issn":["0937-1478"],"eissn":["1521-3811"]},"type":"journal_article","date_created":"2021-04-08T11:04:36Z","status":"public","page":"151","publisher":"Wiley-VCH","author":[{"first_name":"Anna","full_name":"Damman, Anna","last_name":"Damman"},{"last_name":"Schwarzer","id":"13329","full_name":"Schwarzer, Knut","first_name":"Knut"},{"last_name":"Müller","first_name":"Ulrich","id":"12119","full_name":"Müller, Ulrich"},{"id":"13209","last_name":"Schneider","full_name":"Schneider, Jan","first_name":"Jan","orcid":"0000-0001-6401-8873"}],"year":"2014","department":[{"_id":"DEP4023"},{"_id":"DEP4009"},{"_id":"DEP4018"}],"issue":"6","volume":68,"citation":{"ieee":"A. Damman, K. Schwarzer, U. Müller, and J. Schneider, “Backverhalten und Sensorik eines Färberdistelblüteneytraktes am Beispiel Rührkuchen,” Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker, vol. 68, no. 6, p. 151, 2014, doi: 10.1002/lemi.201490056.","ama":"Damman A, Schwarzer K, Müller U, Schneider J. Backverhalten und Sensorik eines Färberdistelblüteneytraktes am Beispiel Rührkuchen. Lebensmittelchemie : Zeitschrift d Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker. 2014;68(6):151. doi:10.1002/lemi.201490056","chicago-de":"Damman, Anna, Knut Schwarzer, Ulrich Müller und Jan Schneider. 2014. Backverhalten und Sensorik eines Färberdistelblüteneytraktes am Beispiel Rührkuchen. Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker 68, Nr. 6: 151. doi:10.1002/lemi.201490056, .","din1505-2-1":"Damman, Anna ; Schwarzer, Knut ; Müller, Ulrich ; Schneider, Jan: Backverhalten und Sensorik eines Färberdistelblüteneytraktes am Beispiel Rührkuchen. In: Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker Bd. 68, Wiley-VCH (2014), Nr. 6, S. 151","short":"A. Damman, K. Schwarzer, U. Müller, J. Schneider, Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker 68 (2014) 151.","chicago":"Damman, Anna, Knut Schwarzer, Ulrich Müller, and Jan Schneider. “Backverhalten und Sensorik eines Färberdistelblüteneytraktes am Beispiel Rührkuchen.” Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker 68, no. 6 (2014): 151. https://doi.org/10.1002/lemi.201490056.","apa":"Damman, A., Schwarzer, K., Müller, U., & Schneider, J. (2014). Backverhalten und Sensorik eines Färberdistelblüteneytraktes am Beispiel Rührkuchen. Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker, 68(6), 151. https://doi.org/10.1002/lemi.201490056","bjps":"Damman A et al. (2014) Backverhalten und Sensorik eines Färberdistelblüteneytraktes am Beispiel Rührkuchen. Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker 68, 151.","havard":"A. Damman, K. Schwarzer, U. Müller, J. Schneider, Backverhalten und Sensorik eines Färberdistelblüteneytraktes am Beispiel Rührkuchen, Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker. 68 (2014) 151.","mla":"Damman, Anna, et al. “Backverhalten und Sensorik eines Färberdistelblüteneytraktes am Beispiel Rührkuchen.” Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker, vol. 68, no. 6, 2014, p. 151, https://doi.org/10.1002/lemi.201490056.","ufg":"Damman, Anna u. a.: Backverhalten und Sensorik eines Färberdistelblüteneytraktes am Beispiel Rührkuchen, in: Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker 68 (2014), H. 6, S. 151.","van":"Damman A, Schwarzer K, Müller U, Schneider J. Backverhalten und Sensorik eines Färberdistelblüteneytraktes am Beispiel Rührkuchen. Lebensmittelchemie : Zeitschrift d Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker. 2014;68(6):151."},"publication_status":"published","title":"Backverhalten und Sensorik eines Färberdistelblüteneytraktes am Beispiel Rührkuchen"},{"publisher":"Wiley-VCH","issue":"6","department":[{"_id":"DEP4023"},{"_id":"DEP4009"},{"_id":"DEP4018"}],"publication_status":"published","doi":"10.1002/lemi.201490056","_id":"5477","intvolume":" 68","user_id":"83779","type":"journal_article","page":"152","status":"public","author":[{"first_name":"J.","last_name":"Münstermann","full_name":"Münstermann, J."},{"full_name":"Kothe, Achim","first_name":"Achim","last_name":"Kothe","id":"43951"},{"last_name":"Zapp","full_name":"Zapp, Jürgen","id":"12568","first_name":"Jürgen"}],"year":"2014","citation":{"apa":"Münstermann, J., Kothe, A., & Zapp, J. (2014). Analytik von Farbstoffen aus den Blüten der Färberdistel Carthamus tinctorius. Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker, 68(6), 152. https://doi.org/10.1002/lemi.201490056","ieee":"J. Münstermann, A. Kothe, and J. Zapp, “Analytik von Farbstoffen aus den Blüten der Färberdistel Carthamus tinctorius,” Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker, vol. 68, no. 6, p. 152, 2014, doi: 10.1002/lemi.201490056.","chicago":"Münstermann, J., Achim Kothe, and Jürgen Zapp. “Analytik von Farbstoffen aus den Blüten der Färberdistel Carthamus tinctorius.” Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker 68, no. 6 (2014): 152. https://doi.org/10.1002/lemi.201490056.","van":"Münstermann J, Kothe A, Zapp J. Analytik von Farbstoffen aus den Blüten der Färberdistel Carthamus tinctorius. Lebensmittelchemie : Zeitschrift d Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker. 2014;68(6):152.","ama":"Münstermann J, Kothe A, Zapp J. Analytik von Farbstoffen aus den Blüten der Färberdistel Carthamus tinctorius. Lebensmittelchemie : Zeitschrift d Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker. 2014;68(6):152. doi:10.1002/lemi.201490056","ufg":"Münstermann, J./Kothe, Achim/Zapp, Jürgen: Analytik von Farbstoffen aus den Blüten der Färberdistel Carthamus tinctorius, in: Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker 68 (2014), H. 6, S. 152.","mla":"Münstermann, J., et al. “Analytik von Farbstoffen aus den Blüten der Färberdistel Carthamus tinctorius.” Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker, vol. 68, no. 6, 2014, p. 152, https://doi.org/10.1002/lemi.201490056.","havard":"J. Münstermann, A. Kothe, J. Zapp, Analytik von Farbstoffen aus den Blüten der Färberdistel Carthamus tinctorius, Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker. 68 (2014) 152.","bjps":"Münstermann J, Kothe A and Zapp J (2014) Analytik von Farbstoffen aus den Blüten der Färberdistel Carthamus tinctorius. Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker 68, 152.","short":"J. Münstermann, A. Kothe, J. Zapp, Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker 68 (2014) 152.","din1505-2-1":"Münstermann, J. ; Kothe, Achim ; Zapp, Jürgen: Analytik von Farbstoffen aus den Blüten der Färberdistel Carthamus tinctorius. In: Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker Bd. 68, Wiley-VCH (2014), Nr. 6, S. 152","chicago-de":"Münstermann, J., Achim Kothe und Jürgen Zapp. 2014. Analytik von Farbstoffen aus den Blüten der Färberdistel Carthamus tinctorius. Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker 68, Nr. 6: 152. doi:10.1002/lemi.201490056, ."},"volume":68,"title":"Analytik von Farbstoffen aus den Blüten der Färberdistel Carthamus tinctorius","language":[{"iso":"ger"}],"date_updated":"2024-05-24T08:57:42Z","date_created":"2021-04-08T11:04:36Z","publication_identifier":{"eissn":["1521-3811"],"issn":["0937-1478"]},"publication":"Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker"},{"date_updated":"2024-05-24T08:58:42Z","user_id":"83779","date_created":"2021-04-08T11:10:52Z","type":"conference","publication":"EnergieAgentur.NRW 3, Wuppertal (2014)","language":[{"iso":"ger"}],"_id":"5478","publication_status":"published","citation":{"chicago-de":"Broeker, Timo und G. Barten. 2014. Biokraftstoffe aus Rest- und Abfallstoffen? Pro & Contra; Innovation & Energie. In: EnergieAgentur.NRW 3, Wuppertal (2014).","din1505-2-1":"Broeker, Timo ; Barten, G.: Biokraftstoffe aus Rest- und Abfallstoffen? Pro & Contra; Innovation & Energie. In: EnergieAgentur.NRW 3, Wuppertal (2014), 2014","short":"T. Broeker, G. Barten, in: EnergieAgentur.NRW 3, Wuppertal (2014), 2014.","chicago":"Broeker, Timo, and G. Barten. “Biokraftstoffe aus Rest- und Abfallstoffen? Pro & Contra; Innovation & Energie.” In EnergieAgentur.NRW 3, Wuppertal (2014), 2014.","apa":"Broeker, T., & Barten, G. (2014). Biokraftstoffe aus Rest- und Abfallstoffen? Pro & Contra; Innovation & Energie. EnergieAgentur.NRW 3, Wuppertal (2014). 3. EnergieAgentur.NRW , Wuppertal.","ieee":"T. Broeker and G. Barten, “Biokraftstoffe aus Rest- und Abfallstoffen? Pro & Contra; Innovation & Energie,” presented at the 3. EnergieAgentur.NRW , Wuppertal, 2014.","ufg":"Broeker, Timo/Barten, G.: Biokraftstoffe aus Rest- und Abfallstoffen? Pro & Contra; Innovation & Energie, in: o. Hg.: EnergieAgentur.NRW 3, Wuppertal (2014), o. O. 2014.","mla":"Broeker, Timo, and G. Barten. “Biokraftstoffe aus Rest- und Abfallstoffen? Pro & Contra; Innovation & Energie.” EnergieAgentur.NRW 3, Wuppertal (2014), 2014.","bjps":"Broeker T and Barten G (2014) Biokraftstoffe aus Rest- und Abfallstoffen? Pro & Contra; Innovation & Energie. EnergieAgentur.NRW 3, Wuppertal (2014).","havard":"T. Broeker, G. Barten, Biokraftstoffe aus Rest- und Abfallstoffen? Pro & Contra; Innovation & Energie, in: EnergieAgentur.NRW 3, Wuppertal (2014), 2014.","van":"Broeker T, Barten G. Biokraftstoffe aus Rest- und Abfallstoffen? Pro & Contra; Innovation & Energie. In: EnergieAgenturNRW 3, Wuppertal (2014). 2014.","ama":"Broeker T, Barten G. Biokraftstoffe aus Rest- und Abfallstoffen? Pro & Contra; Innovation & Energie. In: EnergieAgentur.NRW 3, Wuppertal (2014). ; 2014."},"title":"Biokraftstoffe aus Rest- und Abfallstoffen? Pro & Contra; Innovation & Energie","status":"public","department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"conference":{"name":"3. EnergieAgentur.NRW ","location":"Wuppertal","start_date":"2014"},"year":"2014","author":[{"id":"43927","last_name":"Broeker","full_name":"Broeker, Timo","first_name":"Timo"},{"last_name":"Barten","first_name":"G.","full_name":"Barten, G."}]},{"language":[{"iso":"ger"}],"_id":"5479","publication_identifier":{"issn":["0179-2466"]},"publication":"Brauerei-Forum : Fachzeitschrift für Brauereien und Mälzereien, Getränkeindustrie und deren Partner ","type":"journal_article","date_created":"2021-04-08T11:19:26Z","user_id":"83779","date_updated":"2024-05-24T08:59:19Z","author":[{"first_name":"H.","last_name":"Woest","full_name":"Woest, H."},{"first_name":"I.","full_name":"Cöllü, I.","last_name":"Cöllü"},{"first_name":"Anna","full_name":"Dammann, Anna","last_name":"Dammann"},{"first_name":"Knut","last_name":"Schwarzer","id":"13329","full_name":"Schwarzer, Knut"},{"orcid":"0000-0001-6401-8873","first_name":"Jan","last_name":"Schneider","id":"13209","full_name":"Schneider, Jan"}],"year":"2014","department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"issue":"8","status":"public","publisher":"Westkreuz-Verl. ","title":"Forschungsprojekt zur nachhaltigen und schonenden Getränkepasteurisation abgeschlossen","citation":{"chicago":"Woest, H., I. Cöllü, Anna Dammann, Knut Schwarzer, and Jan Schneider. “Forschungsprojekt zur nachhaltigen und schonenden Getränkepasteurisation abgeschlossen.” Brauerei-Forum : Fachzeitschrift für Brauereien und Mälzereien, Getränkeindustrie und deren Partner , no. 8 (2014).","apa":"Woest, H., Cöllü, I., Dammann, A., Schwarzer, K., & Schneider, J. (2014). Forschungsprojekt zur nachhaltigen und schonenden Getränkepasteurisation abgeschlossen. Brauerei-Forum : Fachzeitschrift für Brauereien und Mälzereien, Getränkeindustrie und deren Partner , 8.","ieee":"H. Woest, I. Cöllü, A. Dammann, K. Schwarzer, and J. Schneider, “Forschungsprojekt zur nachhaltigen und schonenden Getränkepasteurisation abgeschlossen,” Brauerei-Forum : Fachzeitschrift für Brauereien und Mälzereien, Getränkeindustrie und deren Partner , no. 8, 2014.","ufg":"Woest, H. u. a.: Forschungsprojekt zur nachhaltigen und schonenden Getränkepasteurisation abgeschlossen, in: Brauerei-Forum : Fachzeitschrift für Brauereien und Mälzereien, Getränkeindustrie und deren Partner (2014), H. 8.","havard":"H. Woest, I. Cöllü, A. Dammann, K. Schwarzer, J. Schneider, Forschungsprojekt zur nachhaltigen und schonenden Getränkepasteurisation abgeschlossen, Brauerei-Forum : Fachzeitschrift für Brauereien und Mälzereien, Getränkeindustrie und deren Partner . (2014).","mla":"Woest, H., et al. “Forschungsprojekt zur nachhaltigen und schonenden Getränkepasteurisation abgeschlossen.” Brauerei-Forum : Fachzeitschrift für Brauereien und Mälzereien, Getränkeindustrie und deren Partner , no. 8, 2014.","bjps":"Woest H et al. (2014) Forschungsprojekt zur nachhaltigen und schonenden Getränkepasteurisation abgeschlossen. Brauerei-Forum : Fachzeitschrift für Brauereien und Mälzereien, Getränkeindustrie und deren Partner .","van":"Woest H, Cöllü I, Dammann A, Schwarzer K, Schneider J. Forschungsprojekt zur nachhaltigen und schonenden Getränkepasteurisation abgeschlossen. Brauerei-Forum : Fachzeitschrift für Brauereien und Mälzereien, Getränkeindustrie und deren Partner . 2014;(8).","ama":"Woest H, Cöllü I, Dammann A, Schwarzer K, Schneider J. Forschungsprojekt zur nachhaltigen und schonenden Getränkepasteurisation abgeschlossen. Brauerei-Forum : Fachzeitschrift für Brauereien und Mälzereien, Getränkeindustrie und deren Partner . 2014;(8).","din1505-2-1":"Woest, H. ; Cöllü, I. ; Dammann, Anna ; Schwarzer, Knut ; Schneider, Jan: Forschungsprojekt zur nachhaltigen und schonenden Getränkepasteurisation abgeschlossen. In: Brauerei-Forum : Fachzeitschrift für Brauereien und Mälzereien, Getränkeindustrie und deren Partner , Westkreuz-Verl. (2014), Nr. 8","chicago-de":"Woest, H., I. Cöllü, Anna Dammann, Knut Schwarzer und Jan Schneider. 2014. Forschungsprojekt zur nachhaltigen und schonenden Getränkepasteurisation abgeschlossen. Brauerei-Forum : Fachzeitschrift für Brauereien und Mälzereien, Getränkeindustrie und deren Partner , Nr. 8.","short":"H. Woest, I. Cöllü, A. Dammann, K. Schwarzer, J. Schneider, Brauerei-Forum : Fachzeitschrift für Brauereien und Mälzereien, Getränkeindustrie und deren Partner (2014)."},"publication_status":"published"},{"user_id":"83779","date_updated":"2024-05-24T09:00:00Z","publication":"Getränkeherstellung Deutschland : Informationen für die Wirtschaft ","publication_identifier":{"issn":["0936-4129 "]},"type":"journal_article","date_created":"2021-04-08T11:32:52Z","_id":"5480","language":[{"iso":"ger"}],"citation":{"apa":"Schneider, J. (2014). Kundennähe – Wieviel Nähe darf es denn sein? . Getränkeherstellung Deutschland : Informationen für die Wirtschaft .","ieee":"J. Schneider, “Kundennähe – Wieviel Nähe darf es denn sein? ,” Getränkeherstellung Deutschland : Informationen für die Wirtschaft , 2014.","chicago":"Schneider, Jan. “Kundennähe – Wieviel Nähe darf es denn sein? .” Getränkeherstellung Deutschland : Informationen für die Wirtschaft , 2014.","van":"Schneider J. Kundennähe – Wieviel Nähe darf es denn sein? . Getränkeherstellung Deutschland : Informationen für die Wirtschaft . 2014;","ama":"Schneider J. Kundennähe – Wieviel Nähe darf es denn sein? . Getränkeherstellung Deutschland : Informationen für die Wirtschaft . Published online 2014.","ufg":"Schneider, Jan: Kundennähe – Wieviel Nähe darf es denn sein? , in: Getränkeherstellung Deutschland : Informationen für die Wirtschaft (2014).","havard":"J. Schneider, Kundennähe – Wieviel Nähe darf es denn sein? , Getränkeherstellung Deutschland : Informationen für die Wirtschaft . (2014).","mla":"Schneider, Jan. “Kundennähe – Wieviel Nähe darf es denn sein? .” Getränkeherstellung Deutschland : Informationen für die Wirtschaft , 2014.","bjps":"Schneider J (2014) Kundennähe – Wieviel Nähe darf es denn sein? . Getränkeherstellung Deutschland : Informationen für die Wirtschaft .","short":"J. Schneider, Getränkeherstellung Deutschland : Informationen für die Wirtschaft (2014).","chicago-de":"Schneider, Jan. 2014. Kundennähe – Wieviel Nähe darf es denn sein? . Getränkeherstellung Deutschland : Informationen für die Wirtschaft .","din1505-2-1":"Schneider, Jan: Kundennähe – Wieviel Nähe darf es denn sein? . In: Getränkeherstellung Deutschland : Informationen für die Wirtschaft , Kuhn (2014)"},"publication_status":"published","title":"Kundennähe – Wieviel Nähe darf es denn sein? ","publisher":"Kuhn","status":"public","year":"2014","author":[{"id":"13209","full_name":"Schneider, Jan","first_name":"Jan","last_name":"Schneider","orcid":"0000-0001-6401-8873"}],"department":[{"_id":"DEP4023"},{"_id":"DEP4018"}]},{"language":[{"iso":"ger"}],"_id":"5481","date_updated":"2023-03-15T13:49:59Z","user_id":"79260","type":"conference","date_created":"2021-04-08T11:40:24Z","publication":"Museumsrunde Detmold, 01.06.2014","status":"public","department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"conference":{"start_date":"2014-06-01","location":"Detmold","name":"Museumsrunde 2014"},"year":2014,"author":[{"id":"12235","full_name":"Stiebing, Achim","first_name":"Achim","last_name":"Stiebing"}],"publication_status":"published","citation":{"short":"A. Stiebing, in: Museumsrunde Detmold, 01.06.2014, 2014.","din1505-2-1":"Stiebing, Achim: Ebermast - ... Ein neuer Weg? In: Museumsrunde Detmold, 01.06.2014, 2014","chicago-de":"Stiebing, Achim. 2014. Ebermast - ... Ein neuer Weg? In: Museumsrunde Detmold, 01.06.2014.","ama":"Stiebing A. Ebermast - ... Ein neuer Weg? In: Museumsrunde Detmold, 01.06.2014. ; 2014.","van":"Stiebing A. Ebermast - ... Ein neuer Weg? In: Museumsrunde Detmold, 01062014. 2014.","havard":"A. Stiebing, Ebermast - ... Ein neuer Weg?, in: Museumsrunde Detmold, 01.06.2014, 2014.","mla":"Stiebing, Achim. “Ebermast - ... Ein neuer Weg?” Museumsrunde Detmold, 01.06.2014, 2014.","bjps":"Stiebing A (2014) Ebermast - ... Ein neuer Weg? Museumsrunde Detmold, 01.06.2014.","ufg":"Stiebing, Achim (2014): Ebermast - ... Ein neuer Weg?, in: Museumsrunde Detmold, 01.06.2014.","ieee":"A. Stiebing, “Ebermast - ... Ein neuer Weg?,” in Museumsrunde Detmold, 01.06.2014, Detmold, 2014.","apa":"Stiebing, A. (2014). Ebermast - ... Ein neuer Weg? In Museumsrunde Detmold, 01.06.2014. Detmold.","chicago":"Stiebing, Achim. “Ebermast - ... Ein neuer Weg?” In Museumsrunde Detmold, 01.06.2014, 2014."},"title":"Ebermast - ... Ein neuer Weg?"},{"ipc":" C07K1/22; C07K14/415; C07K14/78 ","ipn":"US 20140228542 A1, CA 2849389 A1, CN103945705A, EP 2757899 A1, WO 2013041080A1, WO 2013041080 A9","oa":"1","_id":"5482","type":"patent","date_created":"2021-04-08T11:50:47Z","user_id":"83781","date_updated":"2024-05-17T13:25:01Z","abstract":[{"lang":"eng","text":"The invention relates to a method for producing enriched peptide fractions from protein-containing raw materials, in which protein hydrolysates are separated using chromatography, according to the physiochemical properties thereof, by means of stationary phases with an aqueous solution as an elution agent. "}],"main_file_link":[{"url":"https://www.freepatentsonline.com/20140228542.pdf","open_access":"1"}],"author":[{"first_name":"Hans-Jürgen","full_name":"Danneel, Hans-Jürgen","id":"12231","last_name":"Danneel"}],"year":"2014","department":[{"_id":"DEP4023"},{"_id":"DEP4027"}],"publication_date":"201406-14","status":"public","title":"Method For Producing Peptide Fractions And Use Thereof; Offenlegungsschrift","citation":{"ama":"Danneel HJ. Method For Producing Peptide Fractions And Use Thereof; Offenlegungsschrift. Published online 2014.","ieee":"H.-J. Danneel, “Method For Producing Peptide Fractions And Use Thereof; Offenlegungsschrift.” 2014.","van":"Danneel HJ. Method For Producing Peptide Fractions And Use Thereof; Offenlegungsschrift. 2014.","mla":"Danneel, Hans-Jürgen. Method For Producing Peptide Fractions And Use Thereof; Offenlegungsschrift. 2014.","bjps":"Danneel H-J (2014) Method For Producing Peptide Fractions And Use Thereof; Offenlegungsschrift.","havard":"H.-J. Danneel, Method For Producing Peptide Fractions And Use Thereof; Offenlegungsschrift, (2014).","ufg":"Danneel, Hans-Jürgen: Method For Producing Peptide Fractions And Use Thereof; Offenlegungsschrift, o. O. 2014.","apa":"Danneel, H.-J. (2014). Method For Producing Peptide Fractions And Use Thereof; Offenlegungsschrift.","chicago":"Danneel, Hans-Jürgen. “Method For Producing Peptide Fractions And Use Thereof; Offenlegungsschrift,” 2014.","short":"H.-J. Danneel, (2014).","din1505-2-1":"Danneel, Hans-Jürgen: Method For Producing Peptide Fractions And Use Thereof; Offenlegungsschrift (2014)","chicago-de":"Danneel, Hans-Jürgen. 2014. Method For Producing Peptide Fractions And Use Thereof; Offenlegungsschrift."}},{"user_id":"79260","date_updated":"2023-03-15T13:49:59Z","publication":"Zoetis Seminar, Potsdam, 26.06.2014","date_created":"2021-04-08T11:53:20Z","type":"conference","language":[{"iso":"ger"}],"_id":"5483","citation":{"ufg":"Stiebing, Achim (2014): Impfung gegen Ebergeruch - Verarbeitungseigenschaften, in: Zoetis Seminar, Potsdam, 26.06.2014.","bjps":"Stiebing A (2014) Impfung gegen Ebergeruch - Verarbeitungseigenschaften. Zoetis Seminar, Potsdam, 26.06.2014.","havard":"A. Stiebing, Impfung gegen Ebergeruch - Verarbeitungseigenschaften, in: Zoetis Seminar, Potsdam, 26.06.2014, 2014.","mla":"Stiebing, Achim. “Impfung gegen Ebergeruch - Verarbeitungseigenschaften.” Zoetis Seminar, Potsdam, 26.06.2014, 2014.","van":"Stiebing A. Impfung gegen Ebergeruch - Verarbeitungseigenschaften. In: Zoetis Seminar, Potsdam, 26062014. 2014.","chicago":"Stiebing, Achim. “Impfung gegen Ebergeruch - Verarbeitungseigenschaften.” In Zoetis Seminar, Potsdam, 26.06.2014, 2014.","apa":"Stiebing, A. (2014). Impfung gegen Ebergeruch - Verarbeitungseigenschaften. In Zoetis Seminar, Potsdam, 26.06.2014. Potsdam.","din1505-2-1":"Stiebing, Achim: Impfung gegen Ebergeruch - Verarbeitungseigenschaften. In: Zoetis Seminar, Potsdam, 26.06.2014, 2014","chicago-de":"Stiebing, Achim. 2014. Impfung gegen Ebergeruch - Verarbeitungseigenschaften. In: Zoetis Seminar, Potsdam, 26.06.2014.","short":"A. Stiebing, in: Zoetis Seminar, Potsdam, 26.06.2014, 2014.","ama":"Stiebing A. Impfung gegen Ebergeruch - Verarbeitungseigenschaften. In: Zoetis Seminar, Potsdam, 26.06.2014. ; 2014.","ieee":"A. Stiebing, “Impfung gegen Ebergeruch - Verarbeitungseigenschaften,” in Zoetis Seminar, Potsdam, 26.06.2014, Potsdam, 2014."},"publication_status":"published","title":"Impfung gegen Ebergeruch - Verarbeitungseigenschaften","status":"public","year":2014,"author":[{"first_name":"Achim","last_name":"Stiebing","id":"12235","full_name":"Stiebing, Achim"}],"conference":{"location":"Potsdam","name":"Zoetis Seminar","start_date":"2014-06-26"},"department":[{"_id":"DEP4023"},{"_id":"DEP4019"}]},{"publication":"41. Deutscher Lebensmittelchemikertag, Münster, 10.-12.09.2014","date_created":"2021-04-08T11:56:22Z","type":"conference","user_id":"83778","date_updated":"2024-04-29T10:31:49Z","_id":"5484","language":[{"iso":"ger"}],"title":"Polyphenolgehalte in alten und neuen Apfelsorten in Bezug auf allergene Wirkungen","citation":{"van":"Bernert T, Zapp J. Polyphenolgehalte in alten und neuen Apfelsorten in Bezug auf allergene Wirkungen. In: 41 Deutscher Lebensmittelchemikertag, Münster, 10-12092014. 2014.","ama":"Bernert T, Zapp J. Polyphenolgehalte in alten und neuen Apfelsorten in Bezug auf allergene Wirkungen. In: 41. Deutscher Lebensmittelchemikertag, Münster, 10.-12.09.2014. ; 2014.","ufg":"Bernert, Till/Zapp, Jürgen: Polyphenolgehalte in alten und neuen Apfelsorten in Bezug auf allergene Wirkungen, in: o. Hg.: 41. Deutscher Lebensmittelchemikertag, Münster, 10.-12.09.2014, o. O. 2014.","mla":"Bernert, Till, and Jürgen Zapp. “Polyphenolgehalte in alten und neuen Apfelsorten in Bezug auf allergene Wirkungen.” 41. Deutscher Lebensmittelchemikertag, Münster, 10.-12.09.2014, 2014.","havard":"T. Bernert, J. Zapp, Polyphenolgehalte in alten und neuen Apfelsorten in Bezug auf allergene Wirkungen, in: 41. Deutscher Lebensmittelchemikertag, Münster, 10.-12.09.2014, 2014.","bjps":"Bernert T and Zapp J (2014) Polyphenolgehalte in alten und neuen Apfelsorten in Bezug auf allergene Wirkungen. 41. Deutscher Lebensmittelchemikertag, Münster, 10.-12.09.2014.","apa":"Bernert, T., & Zapp, J. (2014). Polyphenolgehalte in alten und neuen Apfelsorten in Bezug auf allergene Wirkungen. 41. Deutscher Lebensmittelchemikertag, Münster, 10.-12.09.2014. 41. Deutscher Lebensmittelchemikertag, Münster.","ieee":"T. Bernert and J. Zapp, “Polyphenolgehalte in alten und neuen Apfelsorten in Bezug auf allergene Wirkungen,” presented at the 41. Deutscher Lebensmittelchemikertag, Münster, 2014.","chicago":"Bernert, Till, and Jürgen Zapp. “Polyphenolgehalte in alten und neuen Apfelsorten in Bezug auf allergene Wirkungen.” In 41. Deutscher Lebensmittelchemikertag, Münster, 10.-12.09.2014, 2014.","short":"T. Bernert, J. Zapp, in: 41. Deutscher Lebensmittelchemikertag, Münster, 10.-12.09.2014, 2014.","din1505-2-1":"Bernert, Till ; Zapp, Jürgen: Polyphenolgehalte in alten und neuen Apfelsorten in Bezug auf allergene Wirkungen. In: 41. Deutscher Lebensmittelchemikertag, Münster, 10.-12.09.2014, 2014","chicago-de":"Bernert, Till und Jürgen Zapp. 2014. Polyphenolgehalte in alten und neuen Apfelsorten in Bezug auf allergene Wirkungen. In: 41. Deutscher Lebensmittelchemikertag, Münster, 10.-12.09.2014."},"publication_status":"published","author":[{"first_name":"Till","full_name":"Bernert, Till","id":"77407","last_name":"Bernert"},{"first_name":"Jürgen","last_name":"Zapp","full_name":"Zapp, Jürgen","id":"12568"}],"year":"2014","conference":{"end_date":"2014-09-12","start_date":"2014-09-10","location":"Münster","name":"41. Deutscher Lebensmittelchemikertag"},"department":[{"_id":"DEP4023"},{"_id":"DEP4026"}],"status":"public"},{"title":"Bindung von Eisen an Caseinphosphopeptide","publication_status":"published","citation":{"din1505-2-1":"Steffens, M. ; Schneider, Jan: Bindung von Eisen an Caseinphosphopeptide. In: GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014, 2014","chicago-de":"Steffens, M. und Jan Schneider. 2014. Bindung von Eisen an Caseinphosphopeptide. In: GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014.","short":"M. Steffens, J. Schneider, in: GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014, 2014.","chicago":"Steffens, M., and Jan Schneider. “Bindung von Eisen an Caseinphosphopeptide.” In GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014, 2014.","apa":"Steffens, M., & Schneider, J. (2014). Bindung von Eisen an Caseinphosphopeptide. GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014. GDL Kongress Lebensmitteltechnologie 2014, , 16.10-18.10.2014, Frankfurt-Rodgau.","bjps":"Steffens M and Schneider J (2014) Bindung von Eisen an Caseinphosphopeptide. GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014.","mla":"Steffens, M., and Jan Schneider. “Bindung von Eisen an Caseinphosphopeptide.” GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014, 2014.","havard":"M. Steffens, J. Schneider, Bindung von Eisen an Caseinphosphopeptide, in: GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014, 2014.","ufg":"Steffens, M./Schneider, Jan: Bindung von Eisen an Caseinphosphopeptide, in: o. Hg.: GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014, o. O. 2014.","van":"Steffens M, Schneider J. Bindung von Eisen an Caseinphosphopeptide. In: GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 1610-18102014. 2014.","ieee":"M. Steffens and J. Schneider, “Bindung von Eisen an Caseinphosphopeptide,” presented at the GDL Kongress Lebensmitteltechnologie 2014, , 16.10-18.10.2014, Frankfurt-Rodgau, 2014.","ama":"Steffens M, Schneider J. Bindung von Eisen an Caseinphosphopeptide. In: GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014. ; 2014."},"conference":{"location":"Frankfurt-Rodgau","name":"GDL Kongress Lebensmitteltechnologie 2014, , 16.10-18.10.2014","start_date":"2014-10-16","end_date":"2014-10-18"},"department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"year":"2014","author":[{"last_name":"Steffens","first_name":"M.","full_name":"Steffens, M."},{"first_name":"Jan","last_name":"Schneider","full_name":"Schneider, Jan","id":"13209","orcid":"0000-0001-6401-8873"}],"status":"public","date_created":"2021-04-08T11:59:21Z","type":"conference","publication":"GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014","date_updated":"2024-05-24T09:00:34Z","user_id":"83779","language":[{"iso":"ger"}],"_id":"5485"},{"_id":"5486","language":[{"iso":"ger"}],"user_id":"15514","date_updated":"2023-03-15T13:49:59Z","publication":"GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014","type":"conference","date_created":"2021-04-08T11:59:21Z","status":"public","year":2014,"author":[{"full_name":"Pliske, Roland","last_name":"Pliske","id":"12864","first_name":"Roland"},{"first_name":"Ulrich","id":"12119","full_name":"Müller, Ulrich","last_name":"Müller"},{"last_name":"Kohlus","full_name":"Kohlus, R.","first_name":"R."}],"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"conference":{"name":"GDL Kongress Lebensmitteltechnologie 2014, , 16.10-18.10.2014","location":"Frankfurt-Rodgau","end_date":"2014-10-18","start_date":"2014-10-16"},"citation":{"chicago":"Pliske, Roland, Ulrich Müller, and R. Kohlus. “Bestimmung von der Trocknungsgeschwindigkeit und des Wärmeübergangskoeffizienten bei der dynamischen Gefriertrocknung von Starterkulturen in einem Feststoffmischer.” In GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014, 2014.","apa":"Pliske, R., Müller, U., & Kohlus, R. (2014). Bestimmung von der Trocknungsgeschwindigkeit und des Wärmeübergangskoeffizienten bei der dynamischen Gefriertrocknung von Starterkulturen in einem Feststoffmischer. In GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014. Frankfurt-Rodgau.","ufg":"Pliske, Roland et. al. (2014): Bestimmung von der Trocknungsgeschwindigkeit und des Wärmeübergangskoeffizienten bei der dynamischen Gefriertrocknung von Starterkulturen in einem Feststoffmischer, in: GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014.","bjps":"Pliske R, Müller U and Kohlus R (2014) Bestimmung von der Trocknungsgeschwindigkeit und des Wärmeübergangskoeffizienten bei der dynamischen Gefriertrocknung von Starterkulturen in einem Feststoffmischer. GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014.","mla":"Pliske, Roland, et al. “Bestimmung von der Trocknungsgeschwindigkeit und des Wärmeübergangskoeffizienten bei der dynamischen Gefriertrocknung von Starterkulturen in einem Feststoffmischer.” GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014, 2014.","havard":"R. Pliske, U. Müller, R. Kohlus, Bestimmung von der Trocknungsgeschwindigkeit und des Wärmeübergangskoeffizienten bei der dynamischen Gefriertrocknung von Starterkulturen in einem Feststoffmischer, in: GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014, 2014.","van":"Pliske R, Müller U, Kohlus R. Bestimmung von der Trocknungsgeschwindigkeit und des Wärmeübergangskoeffizienten bei der dynamischen Gefriertrocknung von Starterkulturen in einem Feststoffmischer. In: GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 1610-18102014. 2014.","din1505-2-1":"Pliske, Roland ; Müller, Ulrich ; Kohlus, R.: Bestimmung von der Trocknungsgeschwindigkeit und des Wärmeübergangskoeffizienten bei der dynamischen Gefriertrocknung von Starterkulturen in einem Feststoffmischer. In: GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014, 2014","chicago-de":"Pliske, Roland, Ulrich Müller und R. Kohlus. 2014. Bestimmung von der Trocknungsgeschwindigkeit und des Wärmeübergangskoeffizienten bei der dynamischen Gefriertrocknung von Starterkulturen in einem Feststoffmischer. In: GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014.","short":"R. Pliske, U. Müller, R. Kohlus, in: GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014, 2014.","ieee":"R. Pliske, U. Müller, and R. Kohlus, “Bestimmung von der Trocknungsgeschwindigkeit und des Wärmeübergangskoeffizienten bei der dynamischen Gefriertrocknung von Starterkulturen in einem Feststoffmischer,” in GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014, Frankfurt-Rodgau, 2014.","ama":"Pliske R, Müller U, Kohlus R. Bestimmung von der Trocknungsgeschwindigkeit und des Wärmeübergangskoeffizienten bei der dynamischen Gefriertrocknung von Starterkulturen in einem Feststoffmischer. In: GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014. ; 2014."},"publication_status":"published","title":"Bestimmung von der Trocknungsgeschwindigkeit und des Wärmeübergangskoeffizienten bei der dynamischen Gefriertrocknung von Starterkulturen in einem Feststoffmischer"},{"status":"public","author":[{"last_name":"Müller","first_name":"Ulrich","full_name":"Müller, Ulrich","id":"12119"}],"year":2014,"conference":{"name":"GDL Kongress Lebensmitteltechnologie 2014, , 16.10-18.10.2014","location":"Frankfurt-Rodgau","start_date":"2014-10-16","end_date":"2014-10-18"},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"citation":{"ama":"Müller U. Entkeimungsverfahren und biologische Stabilisierung von Lebensmitteln - Behandlungsverfahren für fluide und feste Substanzen aus Sicht eines Lebensmittelverfahrenstechnikers. In: GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014. ; 2014.","ieee":"U. Müller, “ Entkeimungsverfahren und biologische Stabilisierung von Lebensmitteln - Behandlungsverfahren für fluide und feste Substanzen aus Sicht eines Lebensmittelverfahrenstechnikers,” in GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014, Frankfurt-Rodgau, 2014.","chicago-de":"Müller, Ulrich. 2014. Entkeimungsverfahren und biologische Stabilisierung von Lebensmitteln - Behandlungsverfahren für fluide und feste Substanzen aus Sicht eines Lebensmittelverfahrenstechnikers. In: GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014.","din1505-2-1":"Müller, Ulrich: Entkeimungsverfahren und biologische Stabilisierung von Lebensmitteln - Behandlungsverfahren für fluide und feste Substanzen aus Sicht eines Lebensmittelverfahrenstechnikers. In: GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014, 2014","short":"U. Müller, in: GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014, 2014.","bjps":"Müller U (2014) Entkeimungsverfahren und biologische Stabilisierung von Lebensmitteln - Behandlungsverfahren für fluide und feste Substanzen aus Sicht eines Lebensmittelverfahrenstechnikers. GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014.","mla":"Müller, Ulrich. “ Entkeimungsverfahren und biologische Stabilisierung von Lebensmitteln - Behandlungsverfahren für fluide und feste Substanzen aus Sicht eines Lebensmittelverfahrenstechnikers.” GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014, 2014.","havard":"U. Müller, Entkeimungsverfahren und biologische Stabilisierung von Lebensmitteln - Behandlungsverfahren für fluide und feste Substanzen aus Sicht eines Lebensmittelverfahrenstechnikers, in: GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014, 2014.","ufg":"Müller, Ulrich (2014): Entkeimungsverfahren und biologische Stabilisierung von Lebensmitteln - Behandlungsverfahren für fluide und feste Substanzen aus Sicht eines Lebensmittelverfahrenstechnikers, in: GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014.","van":"Müller U. Entkeimungsverfahren und biologische Stabilisierung von Lebensmitteln - Behandlungsverfahren für fluide und feste Substanzen aus Sicht eines Lebensmittelverfahrenstechnikers. In: GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 1610-18102014. 2014.","chicago":"Müller, Ulrich. “ Entkeimungsverfahren und biologische Stabilisierung von Lebensmitteln - Behandlungsverfahren für fluide und feste Substanzen aus Sicht eines Lebensmittelverfahrenstechnikers.” In GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014, 2014.","apa":"Müller, U. (2014). Entkeimungsverfahren und biologische Stabilisierung von Lebensmitteln - Behandlungsverfahren für fluide und feste Substanzen aus Sicht eines Lebensmittelverfahrenstechnikers. In GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014. Frankfurt-Rodgau."},"publication_status":"published","title":" \tEntkeimungsverfahren und biologische Stabilisierung von Lebensmitteln - Behandlungsverfahren für fluide und feste Substanzen aus Sicht eines Lebensmittelverfahrenstechnikers","language":[{"iso":"ger"}],"_id":"5487","user_id":"15514","date_updated":"2023-03-15T13:49:59Z","publication":"GDL Kongress Lebensmitteltechnologie 2014, Frankfurt-Rodgau, 16.10-18.10.2014","date_created":"2021-04-08T11:59:21Z","type":"conference"},{"publication":"37. Lemgoer Arbeitstagung Fleisch und Feinkost, 03.11.2014","date_created":"2021-04-08T12:56:55Z","type":"conference","user_id":"79260","date_updated":"2023-03-15T13:49:59Z","language":[{"iso":"ger"}],"_id":"5488","title":"Gefrierlagerstabilität von Fleischerzeugnissen - Anforderungen an fleischhaltige TK-Produkte","citation":{"apa":"Stiebing, A. (2014). Gefrierlagerstabilität von Fleischerzeugnissen - Anforderungen an fleischhaltige TK-Produkte. In 37. Lemgoer Arbeitstagung Fleisch und Feinkost, 03.11.2014. Lemgo.","ieee":"A. Stiebing, “Gefrierlagerstabilität von Fleischerzeugnissen - Anforderungen an fleischhaltige TK-Produkte,” in 37. Lemgoer Arbeitstagung Fleisch und Feinkost, 03.11.2014, Lemgo, 2014.","chicago":"Stiebing, Achim. “Gefrierlagerstabilität von Fleischerzeugnissen - Anforderungen an fleischhaltige TK-Produkte.” In 37. Lemgoer Arbeitstagung Fleisch und Feinkost, 03.11.2014, 2014.","van":"Stiebing A. Gefrierlagerstabilität von Fleischerzeugnissen - Anforderungen an fleischhaltige TK-Produkte. In: 37 Lemgoer Arbeitstagung Fleisch und Feinkost, 03112014. 2014.","ama":"Stiebing A. Gefrierlagerstabilität von Fleischerzeugnissen - Anforderungen an fleischhaltige TK-Produkte. In: 37. Lemgoer Arbeitstagung Fleisch und Feinkost, 03.11.2014. ; 2014.","ufg":"Stiebing, Achim (2014): Gefrierlagerstabilität von Fleischerzeugnissen - Anforderungen an fleischhaltige TK-Produkte, in: 37. Lemgoer Arbeitstagung Fleisch und Feinkost, 03.11.2014.","havard":"A. Stiebing, Gefrierlagerstabilität von Fleischerzeugnissen - Anforderungen an fleischhaltige TK-Produkte, in: 37. Lemgoer Arbeitstagung Fleisch und Feinkost, 03.11.2014, 2014.","bjps":"Stiebing A (2014) Gefrierlagerstabilität von Fleischerzeugnissen - Anforderungen an fleischhaltige TK-Produkte. 37. Lemgoer Arbeitstagung Fleisch und Feinkost, 03.11.2014.","mla":"Stiebing, Achim. “Gefrierlagerstabilität von Fleischerzeugnissen - Anforderungen an fleischhaltige TK-Produkte.” 37. Lemgoer Arbeitstagung Fleisch und Feinkost, 03.11.2014, 2014.","short":"A. Stiebing, in: 37. Lemgoer Arbeitstagung Fleisch und Feinkost, 03.11.2014, 2014.","din1505-2-1":"Stiebing, Achim: Gefrierlagerstabilität von Fleischerzeugnissen - Anforderungen an fleischhaltige TK-Produkte. In: 37. Lemgoer Arbeitstagung Fleisch und Feinkost, 03.11.2014, 2014","chicago-de":"Stiebing, Achim. 2014. Gefrierlagerstabilität von Fleischerzeugnissen - Anforderungen an fleischhaltige TK-Produkte. In: 37. Lemgoer Arbeitstagung Fleisch und Feinkost, 03.11.2014."},"publication_status":"published","year":2014,"author":[{"id":"12235","last_name":"Stiebing","full_name":"Stiebing, Achim","first_name":"Achim"}],"department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"conference":{"location":"Lemgo","name":"37. Lemgoer Arbeitstagung Fleisch und Feinkost","start_date":"2014-11-03"},"status":"public"},{"status":"public","year":2014,"author":[{"full_name":"Stiebing, Achim","last_name":"Stiebing","first_name":"Achim","id":"12235"}],"conference":{"end_date":"2014-11-16","start_date":"2014-11-15","name":"Fortbildungsseminar des Bundesverbandes der Deutschen Fleischwarenindustrie (BVDF)","location":"Rheinhardsbrunn"},"department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"citation":{"ama":"Stiebing A. Technologie der Rohschinkenherstellung - Technologie der Rohwurstherstellung. In: Fortbildungsseminar des Bundesverbandes der Deutschen Fleischwarenindustrie (BVDF), Rheinhardsbrunn, 16.-17.11.2013 und 15.-16.11.2014. ; 2014.","ieee":"A. Stiebing, “Technologie der Rohschinkenherstellung - Technologie der Rohwurstherstellung,” in Fortbildungsseminar des Bundesverbandes der Deutschen Fleischwarenindustrie (BVDF), Rheinhardsbrunn, 16.-17.11.2013 und 15.-16.11.2014, Rheinhardsbrunn, 2014.","van":"Stiebing A. Technologie der Rohschinkenherstellung - Technologie der Rohwurstherstellung. In: Fortbildungsseminar des Bundesverbandes der Deutschen Fleischwarenindustrie (BVDF), Rheinhardsbrunn, 16-17112013 und 15-16112014. 2014.","havard":"A. Stiebing, Technologie der Rohschinkenherstellung - Technologie der Rohwurstherstellung, in: Fortbildungsseminar des Bundesverbandes der Deutschen Fleischwarenindustrie (BVDF), Rheinhardsbrunn, 16.-17.11.2013 und 15.-16.11.2014, 2014.","mla":"Stiebing, Achim. “Technologie der Rohschinkenherstellung - Technologie der Rohwurstherstellung.” Fortbildungsseminar des Bundesverbandes der Deutschen Fleischwarenindustrie (BVDF), Rheinhardsbrunn, 16.-17.11.2013 und 15.-16.11.2014, 2014.","bjps":"Stiebing A (2014) Technologie der Rohschinkenherstellung - Technologie der Rohwurstherstellung. Fortbildungsseminar des Bundesverbandes der Deutschen Fleischwarenindustrie (BVDF), Rheinhardsbrunn, 16.-17.11.2013 und 15.-16.11.2014.","ufg":"Stiebing, Achim (2014): Technologie der Rohschinkenherstellung - Technologie der Rohwurstherstellung, in: Fortbildungsseminar des Bundesverbandes der Deutschen Fleischwarenindustrie (BVDF), Rheinhardsbrunn, 16.-17.11.2013 und 15.-16.11.2014.","apa":"Stiebing, A. (2014). Technologie der Rohschinkenherstellung - Technologie der Rohwurstherstellung. In Fortbildungsseminar des Bundesverbandes der Deutschen Fleischwarenindustrie (BVDF), Rheinhardsbrunn, 16.-17.11.2013 und 15.-16.11.2014. Rheinhardsbrunn.","chicago":"Stiebing, Achim. “Technologie der Rohschinkenherstellung - Technologie der Rohwurstherstellung.” In Fortbildungsseminar des Bundesverbandes der Deutschen Fleischwarenindustrie (BVDF), Rheinhardsbrunn, 16.-17.11.2013 und 15.-16.11.2014, 2014.","short":"A. Stiebing, in: Fortbildungsseminar des Bundesverbandes der Deutschen Fleischwarenindustrie (BVDF), Rheinhardsbrunn, 16.-17.11.2013 und 15.-16.11.2014, 2014.","chicago-de":"Stiebing, Achim. 2014. Technologie der Rohschinkenherstellung - Technologie der Rohwurstherstellung. In: Fortbildungsseminar des Bundesverbandes der Deutschen Fleischwarenindustrie (BVDF), Rheinhardsbrunn, 16.-17.11.2013 und 15.-16.11.2014.","din1505-2-1":"Stiebing, Achim: Technologie der Rohschinkenherstellung - Technologie der Rohwurstherstellung. In: Fortbildungsseminar des Bundesverbandes der Deutschen Fleischwarenindustrie (BVDF), Rheinhardsbrunn, 16.-17.11.2013 und 15.-16.11.2014, 2014"},"publication_status":"published","title":"Technologie der Rohschinkenherstellung - Technologie der Rohwurstherstellung","_id":"5489","language":[{"iso":"ger"}],"user_id":"79260","date_updated":"2023-03-15T13:49:59Z","publication":"Fortbildungsseminar des Bundesverbandes der Deutschen Fleischwarenindustrie (BVDF), Rheinhardsbrunn, 16.-17.11.2013 und 15.-16.11.2014","type":"conference","date_created":"2021-04-08T13:00:30Z"},{"date_updated":"2024-05-24T09:02:58Z","user_id":"83779","type":"conference","date_created":"2021-04-08T13:03:31Z","publication":"Biokraftstofftagung NRW, Haus Düsse, Landwirtschaftskammer NRW, Bad Sassendorf, 27.11.2014","language":[{"iso":"ger"}],"_id":"5490","publication_status":"published","citation":{"van":"Broeker T, Blöhse D, Bittner J, Ramke HG, Schneider J. Erweiterung einer Brennerei zu einer Lignocellulose-Bioraffinerie - Stoff- und Energiestrom Management für Bioethanol, Biogas und HTC-Biokohle. In: Biokraftstofftagung NRW, Haus Düsse, Landwirtschaftskammer NRW, Bad Sassendorf, 27112014. 2014.","mla":"Broeker, Timo, et al. “Erweiterung einer Brennerei zu einer Lignocellulose-Bioraffinerie - Stoff- und Energiestrom Management für Bioethanol, Biogas und HTC-Biokohle.” Biokraftstofftagung NRW, Haus Düsse, Landwirtschaftskammer NRW, Bad Sassendorf, 27.11.2014, 2014.","bjps":"Broeker T et al. (2014) Erweiterung einer Brennerei zu einer Lignocellulose-Bioraffinerie - Stoff- und Energiestrom Management für Bioethanol, Biogas und HTC-Biokohle. Biokraftstofftagung NRW, Haus Düsse, Landwirtschaftskammer NRW, Bad Sassendorf, 27.11.2014.","havard":"T. Broeker, D. Blöhse, J. Bittner, H.-G. Ramke, J. Schneider, Erweiterung einer Brennerei zu einer Lignocellulose-Bioraffinerie - Stoff- und Energiestrom Management für Bioethanol, Biogas und HTC-Biokohle, in: Biokraftstofftagung NRW, Haus Düsse, Landwirtschaftskammer NRW, Bad Sassendorf, 27.11.2014, 2014.","ufg":"Broeker, Timo u. a.: Erweiterung einer Brennerei zu einer Lignocellulose-Bioraffinerie - Stoff- und Energiestrom Management für Bioethanol, Biogas und HTC-Biokohle, in: o. Hg.: Biokraftstofftagung NRW, Haus Düsse, Landwirtschaftskammer NRW, Bad Sassendorf, 27.11.2014, o. O. 2014.","apa":"Broeker, T., Blöhse, D., Bittner, J., Ramke, H.-G., & Schneider, J. (2014). Erweiterung einer Brennerei zu einer Lignocellulose-Bioraffinerie - Stoff- und Energiestrom Management für Bioethanol, Biogas und HTC-Biokohle. Biokraftstofftagung NRW, Haus Düsse, Landwirtschaftskammer NRW, Bad Sassendorf, 27.11.2014. Biokraftstofftagung NRW, Haus Düsse, Landwirtschaftskammer NRW, Bad Sassendorf.","chicago":"Broeker, Timo, D. Blöhse, J. Bittner, Hans-Günter Ramke, and Jan Schneider. “Erweiterung einer Brennerei zu einer Lignocellulose-Bioraffinerie - Stoff- und Energiestrom Management für Bioethanol, Biogas und HTC-Biokohle.” In Biokraftstofftagung NRW, Haus Düsse, Landwirtschaftskammer NRW, Bad Sassendorf, 27.11.2014, 2014.","short":"T. Broeker, D. Blöhse, J. Bittner, H.-G. Ramke, J. Schneider, in: Biokraftstofftagung NRW, Haus Düsse, Landwirtschaftskammer NRW, Bad Sassendorf, 27.11.2014, 2014.","din1505-2-1":"Broeker, Timo ; Blöhse, D. ; Bittner, J. ; Ramke, Hans-Günter ; Schneider, Jan: Erweiterung einer Brennerei zu einer Lignocellulose-Bioraffinerie - Stoff- und Energiestrom Management für Bioethanol, Biogas und HTC-Biokohle. In: Biokraftstofftagung NRW, Haus Düsse, Landwirtschaftskammer NRW, Bad Sassendorf, 27.11.2014, 2014","chicago-de":"Broeker, Timo, D. Blöhse, J. Bittner, Hans-Günter Ramke und Jan Schneider. 2014. Erweiterung einer Brennerei zu einer Lignocellulose-Bioraffinerie - Stoff- und Energiestrom Management für Bioethanol, Biogas und HTC-Biokohle. In: Biokraftstofftagung NRW, Haus Düsse, Landwirtschaftskammer NRW, Bad Sassendorf, 27.11.2014.","ama":"Broeker T, Blöhse D, Bittner J, Ramke HG, Schneider J. Erweiterung einer Brennerei zu einer Lignocellulose-Bioraffinerie - Stoff- und Energiestrom Management für Bioethanol, Biogas und HTC-Biokohle. In: Biokraftstofftagung NRW, Haus Düsse, Landwirtschaftskammer NRW, Bad Sassendorf, 27.11.2014. ; 2014.","ieee":"T. Broeker, D. Blöhse, J. Bittner, H.-G. Ramke, and J. Schneider, “Erweiterung einer Brennerei zu einer Lignocellulose-Bioraffinerie - Stoff- und Energiestrom Management für Bioethanol, Biogas und HTC-Biokohle,” presented at the Biokraftstofftagung NRW, Haus Düsse, Landwirtschaftskammer NRW, Bad Sassendorf, 2014."},"title":"Erweiterung einer Brennerei zu einer Lignocellulose-Bioraffinerie - Stoff- und Energiestrom Management für Bioethanol, Biogas und HTC-Biokohle","status":"public","department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"conference":{"location":"Bad Sassendorf","name":"Biokraftstofftagung NRW, Haus Düsse, Landwirtschaftskammer NRW","start_date":"2014-11-27"},"author":[{"first_name":"Timo","full_name":"Broeker, Timo","last_name":"Broeker","id":"43927"},{"full_name":"Blöhse, D.","first_name":"D.","last_name":"Blöhse"},{"last_name":"Bittner","first_name":"J.","full_name":"Bittner, J."},{"first_name":"Hans-Günter","last_name":"Ramke","full_name":"Ramke, Hans-Günter","id":"21006"},{"first_name":"Jan","id":"13209","last_name":"Schneider","full_name":"Schneider, Jan","orcid":"0000-0001-6401-8873"}],"year":"2014"},{"isi":"1","publication_status":"published","abstract":[{"lang":"eng","text":"Transducers based on dielectric electroactive polymers (DEAP) use electrostatic pressure to convert electric energy into strain energy or vice versa. Besides this, they are also designed for sensor applications in monitoring the actual stretch state on the basis of the deformation dependent capacitive-resistive behavior of the DEAP. In order to enable an efficient and proper closed loop control operation of these transducers, e.g. in positioning or energy harvesting applications, on the one hand, sensors based on DEAP material can be integrated into the transducers and evaluated externally, and on the other hand, the transducer itself can be used as a sensor, also in terms of self-sensing. For this purpose the characteristic electrical behavior of the transducer has to be evaluated in order to determine the mechanical state. Also, adequate online identification algorithms with sufficient accuracy and dynamics are required, independent from the sensor concept utilized, in order to determine the electrical DEAP parameters in real time. Therefore, in this contribution, algorithms are developed in the frequency domain for identifications of the capacitance as well as the electrode and polymer resistance of a DEAP, which are validated by measurements. These algorithms are designed for self-sensing applications, especially if the power electronics utilized is operated at a constant switching frequency, and parasitic harmonic oscillations are induced besides the desired DC value. These oscillations can be used for the online identification, so an additional superimposed excitation is no longer necessary. For this purpose a dual active bridge (DAB) is introduced to drive the DEAP transducer. The capabilities of the real-time identification algorithm in combination with the DAB are presented in detail and discussed, finally."}],"issue":"10","conference":{"name":"ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems","location":"Snowbird, UT","end_date":"2014-09-18","start_date":"2014-09-16"},"department":[{"_id":"DEP6020"},{"_id":"DEP5022"}],"quality_controlled":"1","publisher":"IOP Publishing","type":"scientific_journal_article","intvolume":" 23","user_id":"83781","doi":"10.1088/0964-1726/23/10/104007","article_number":"104007","_id":"13023","place":"Bristol","title":"Online identification algorithms for integrated dielectric electroactive polymer sensors and self-sensing concepts","citation":{"ieee":"T. Hoffstadt, M. Griese, and J. Maas, “Online identification algorithms for integrated dielectric electroactive polymer sensors and self-sensing concepts,” Smart Materials and Structures, vol. 23, no. 10, Art. no. 104007, 2014, doi: 10.1088/0964-1726/23/10/104007.","ama":"Hoffstadt T, Griese M, Maas J. Online identification algorithms for integrated dielectric electroactive polymer sensors and self-sensing concepts. Smart Materials and Structures. 2014;23(10). doi:10.1088/0964-1726/23/10/104007","apa":"Hoffstadt, T., Griese, M., & Maas, J. (2014). Online identification algorithms for integrated dielectric electroactive polymer sensors and self-sensing concepts. Smart Materials and Structures, 23(10), Article 104007. https://doi.org/10.1088/0964-1726/23/10/104007","chicago":"Hoffstadt, Thorben, Martin Griese, and Jürgen Maas. “Online Identification Algorithms for Integrated Dielectric Electroactive Polymer Sensors and Self-Sensing Concepts.” Smart Materials and Structures 23, no. 10 (2014). https://doi.org/10.1088/0964-1726/23/10/104007.","van":"Hoffstadt T, Griese M, Maas J. Online identification algorithms for integrated dielectric electroactive polymer sensors and self-sensing concepts. Smart Materials and Structures. 2014;23(10).","ufg":"Hoffstadt, Thorben/Griese, Martin/Maas, Jürgen: Online identification algorithms for integrated dielectric electroactive polymer sensors and self-sensing concepts, in: Smart Materials and Structures 23 (2014), H. 10.","bjps":"Hoffstadt T, Griese M and Maas J (2014) Online Identification Algorithms for Integrated Dielectric Electroactive Polymer Sensors and Self-Sensing Concepts. Smart Materials and Structures 23.","mla":"Hoffstadt, Thorben, et al. “Online Identification Algorithms for Integrated Dielectric Electroactive Polymer Sensors and Self-Sensing Concepts.” Smart Materials and Structures, vol. 23, no. 10, 104007, 2014, https://doi.org/10.1088/0964-1726/23/10/104007.","havard":"T. Hoffstadt, M. Griese, J. Maas, Online identification algorithms for integrated dielectric electroactive polymer sensors and self-sensing concepts, Smart Materials and Structures. 23 (2014).","short":"T. Hoffstadt, M. Griese, J. Maas, Smart Materials and Structures 23 (2014).","chicago-de":"Hoffstadt, Thorben, Martin Griese und Jürgen Maas. 2014. Online identification algorithms for integrated dielectric electroactive polymer sensors and self-sensing concepts. Smart Materials and Structures 23, Nr. 10. doi:10.1088/0964-1726/23/10/104007, .","din1505-2-1":"Hoffstadt, Thorben ; Griese, Martin ; Maas, Jürgen: Online identification algorithms for integrated dielectric electroactive polymer sensors and self-sensing concepts. In: Smart Materials and Structures Bd. 23. Bristol, IOP Publishing (2014), Nr. 10"},"volume":23,"external_id":{"isi":["000342369900008"]},"author":[{"full_name":"Hoffstadt, Thorben","last_name":"Hoffstadt","first_name":"Thorben"},{"id":"52308","first_name":"Martin","full_name":"Griese, Martin","last_name":"Griese"},{"first_name":"Jürgen","last_name":"Maas","id":"1827","full_name":"Maas, Jürgen"}],"year":"2014","status":"public","date_created":"2025-06-25T08:07:52Z","publication":"Smart Materials and Structures","publication_identifier":{"issn":["0964-1726"],"eissn":["1361-665X"]},"date_updated":"2025-06-25T08:14:25Z","language":[{"iso":"eng"}],"keyword":["dielectric electroactive polymer","identification algorithm","self-sensing","DEAP sensor"]},{"type":"conference","date_created":"2019-12-04T09:08:30Z","publication":"Media Watermarking, Security, and Forensics 2013","date_updated":"2023-03-15T13:49:38Z","user_id":"45673","language":[{"iso":"eng"}],"place":"San Francisco, USA","doi":"https://doi.org/10.1117/12.2001444","_id":"2129","title":"Banknote authentication with mobile devices","publication_status":"published","citation":{"ieee":"V. Lohweg et al., “Banknote authentication with mobile devices,” in Media Watermarking, Security, and Forensics 2013, 2013.","ama":"Lohweg V, Dörksen H, Hoffmann JL, et al. Banknote authentication with mobile devices. In: Media Watermarking, Security, and Forensics 2013. San Francisco, USA: (03-07.02.2013) IST/SPIE Electronic Imaging 2013; 2013. doi:https://doi.org/10.1117/12.2001444","din1505-2-1":"Lohweg, Volker ; Dörksen, Helene ; Hoffmann, Jan Leif ; Hildebrand, Roland ; Gillich, Eugen ; Schaede, Johannes ; Hofmann, Jürg: Banknote authentication with mobile devices. In: Media Watermarking, Security, and Forensics 2013. San Francisco, USA : (03-07.02.2013) IST/SPIE Electronic Imaging 2013, 2013","chicago-de":"Lohweg, Volker, Helene Dörksen, Jan Leif Hoffmann, Roland Hildebrand, Eugen Gillich, Johannes Schaede und Jürg Hofmann. 2013. Banknote authentication with mobile devices. In: Media Watermarking, Security, and Forensics 2013. San Francisco, USA: (03-07.02.2013) IST/SPIE Electronic Imaging 2013. doi:https://doi.org/10.1117/12.2001444, .","short":"V. Lohweg, H. Dörksen, J.L. Hoffmann, R. Hildebrand, E. Gillich, J. Schaede, J. Hofmann, in: Media Watermarking, Security, and Forensics 2013, (03-07.02.2013) IST/SPIE Electronic Imaging 2013, San Francisco, USA, 2013.","chicago":"Lohweg, Volker, Helene Dörksen, Jan Leif Hoffmann, Roland Hildebrand, Eugen Gillich, Johannes Schaede, and Jürg Hofmann. “Banknote Authentication with Mobile Devices.” In Media Watermarking, Security, and Forensics 2013. San Francisco, USA: (03-07.02.2013) IST/SPIE Electronic Imaging 2013, 2013. https://doi.org/10.1117/12.2001444.","apa":"Lohweg, V., Dörksen, H., Hoffmann, J. L., Hildebrand, R., Gillich, E., Schaede, J., & Hofmann, J. (2013). Banknote authentication with mobile devices. In Media Watermarking, Security, and Forensics 2013. San Francisco, USA: (03-07.02.2013) IST/SPIE Electronic Imaging 2013. https://doi.org/10.1117/12.2001444","ufg":"Lohweg, Volker et. al. (2013): Banknote authentication with mobile devices, in: Media Watermarking, Security, and Forensics 2013, San Francisco, USA.","havard":"V. Lohweg, H. Dörksen, J.L. Hoffmann, R. Hildebrand, E. Gillich, J. Schaede, J. Hofmann, Banknote authentication with mobile devices, in: Media Watermarking, Security, and Forensics 2013, (03-07.02.2013) IST/SPIE Electronic Imaging 2013, San Francisco, USA, 2013.","mla":"Lohweg, Volker, et al. “Banknote Authentication with Mobile Devices.” Media Watermarking, Security, and Forensics 2013, (03-07.02.2013) IST/SPIE Electronic Imaging 2013, 2013, doi:https://doi.org/10.1117/12.2001444.","bjps":"Lohweg V et al. (2013) Banknote Authentication with Mobile Devices. Media Watermarking, Security, and Forensics 2013. San Francisco, USA: (03-07.02.2013) IST/SPIE Electronic Imaging 2013.","van":"Lohweg V, Dörksen H, Hoffmann JL, Hildebrand R, Gillich E, Schaede J, et al. Banknote authentication with mobile devices. In: Media Watermarking, Security, and Forensics 2013. San Francisco, USA: (03-07.02.2013) IST/SPIE Electronic Imaging 2013; 2013."},"department":[{"_id":"DEP5023"}],"year":2013,"author":[{"orcid":"0000-0002-3325-7887","full_name":"Lohweg, Volker","first_name":"Volker","last_name":"Lohweg","id":"1804"},{"full_name":"Dörksen, Helene","last_name":"Dörksen","id":"46416","first_name":"Helene"},{"first_name":"Jan Leif","id":"46243","last_name":"Hoffmann","full_name":"Hoffmann, Jan Leif"},{"full_name":"Hildebrand, Roland","last_name":"Hildebrand","id":"1639","first_name":"Roland"},{"full_name":"Gillich, Eugen","id":"1706","last_name":"Gillich","first_name":"Eugen"},{"first_name":"Johannes","last_name":"Schaede","full_name":"Schaede, Johannes","id":"2128"},{"last_name":"Hofmann","full_name":"Hofmann, Jürg","first_name":"Jürg"}],"abstract":[{"text":"Maintaining confidence in security documents, especially banknotes, is and remains a major concern for the central banks in order to maintain the stability of the economy around the world. In this paper we describe an image processing and pattern recognition approach which is based on the Sound-of-Intaglio principle for the usage in smart devices such as smartphones. Today, in many world regions smartphones are in use. These devices become more and more computing units, equipped with resource-limited, but effective CPUs, cameras with illumination, and flexible operating systems. Hence, it is obvious to apply smartphones for banknote authentication, especially for visually impaired persons. Our approach shows that those devices are capable of processing data under the constraints of image quality and processing power. Strictly a mobile device as such is not an industrial product for harsh environments, but it is possible to use mobile devices for banknote authentication. The concept is based on a new strategy for constructing adaptive Wavelets for the analysis of different print patterns on a banknote. Furthermore, a banknote specific feature vector is generated which describes an authentic banknote effectively under various illumination conditions. A multi-stage Lineardiscriminant- analysis classifier generates stable and reliable output.","lang":"eng"}],"status":"public","publisher":"(03-07.02.2013) IST/SPIE Electronic Imaging 2013"},{"date_updated":"2023-03-15T13:49:39Z","user_id":"45673","type":"conference","date_created":"2019-12-04T09:10:45Z","publication":"Quality Engineering","language":[{"iso":"ger"}],"_id":"2132","publication_status":"published","citation":{"ieee":"V. Lohweg, “Industrielle Bildverarbeitung und Mustererkennung – Schlüssel für Industrie 4.0?,” in Quality Engineering, 2013, pp. 58–59.","ama":"Lohweg V. Industrielle Bildverarbeitung und Mustererkennung – Schlüssel für Industrie 4.0? In: Quality Engineering. Konradin-Verlag, R. Kohlhammer GmbH; 2013:58-59.","chicago-de":"Lohweg, Volker. 2013. Industrielle Bildverarbeitung und Mustererkennung – Schlüssel für Industrie 4.0? In: Quality Engineering, 58–59. Konradin-Verlag, R. Kohlhammer GmbH.","din1505-2-1":"Lohweg, Volker: Industrielle Bildverarbeitung und Mustererkennung – Schlüssel für Industrie 4.0? In: Quality Engineering : Konradin-Verlag, R. Kohlhammer GmbH, 2013, S. 58–59","short":"V. Lohweg, in: Quality Engineering, Konradin-Verlag, R. Kohlhammer GmbH, 2013, pp. 58–59.","chicago":"Lohweg, Volker. “Industrielle Bildverarbeitung und Mustererkennung – Schlüssel für Industrie 4.0?” In Quality Engineering, 58–59. Konradin-Verlag, R. Kohlhammer GmbH, 2013.","apa":"Lohweg, V. (2013). Industrielle Bildverarbeitung und Mustererkennung – Schlüssel für Industrie 4.0? In Quality Engineering (pp. 58–59). Konradin-Verlag, R. Kohlhammer GmbH.","ufg":"Lohweg, Volker (2013): Industrielle Bildverarbeitung und Mustererkennung – Schlüssel für Industrie 4.0?, in: Quality Engineering, S. 58–59.","mla":"Lohweg, Volker. “Industrielle Bildverarbeitung und Mustererkennung – Schlüssel für Industrie 4.0?” Quality Engineering, Konradin-Verlag, R. Kohlhammer GmbH, 2013, pp. 58–59.","bjps":"Lohweg V (2013) Industrielle Bildverarbeitung und Mustererkennung – Schlüssel für Industrie 4.0? Quality Engineering. Konradin-Verlag, R. Kohlhammer GmbH, pp. 58–59.","havard":"V. Lohweg, Industrielle Bildverarbeitung und Mustererkennung – Schlüssel für Industrie 4.0?, in: Quality Engineering, Konradin-Verlag, R. Kohlhammer GmbH, 2013: pp. 58–59.","van":"Lohweg V. Industrielle Bildverarbeitung und Mustererkennung – Schlüssel für Industrie 4.0? In: Quality Engineering. Konradin-Verlag, R. Kohlhammer GmbH; 2013. p. 58–9."},"title":"Industrielle Bildverarbeitung und Mustererkennung – Schlüssel für Industrie 4.0?","page":"58-59","status":"public","publisher":"Konradin-Verlag, R. Kohlhammer GmbH","department":[{"_id":"DEP5023"}],"year":2013,"author":[{"orcid":"0000-0002-3325-7887","first_name":"Volker","full_name":"Lohweg, Volker","id":"1804","last_name":"Lohweg"}]},{"title":"Industrielle Bildverarbeitung und Mustererkennung– Schlüssel für Industrie 4.0","publication_status":"published","citation":{"short":"V. Lohweg, in: Forum Robotics, Automation Vision, Hannover Messe Industrie, 2013.","chicago-de":"Lohweg, Volker. 2013. Industrielle Bildverarbeitung und Mustererkennung– Schlüssel für Industrie 4.0. In: Forum Robotics, Automation Vision. Hannover Messe Industrie.","din1505-2-1":"Lohweg, Volker: Industrielle Bildverarbeitung und Mustererkennung– Schlüssel für Industrie 4.0. In: Forum Robotics, Automation Vision : Hannover Messe Industrie, 2013","ama":"Lohweg V. Industrielle Bildverarbeitung und Mustererkennung– Schlüssel für Industrie 4.0. In: Forum Robotics, Automation Vision. Hannover Messe Industrie; 2013.","van":"Lohweg V. Industrielle Bildverarbeitung und Mustererkennung– Schlüssel für Industrie 4.0. In: Forum Robotics, Automation Vision. Hannover Messe Industrie; 2013.","havard":"V. Lohweg, Industrielle Bildverarbeitung und Mustererkennung– Schlüssel für Industrie 4.0, in: Forum Robotics, Automation Vision, Hannover Messe Industrie, 2013.","bjps":"Lohweg V (2013) Industrielle Bildverarbeitung und Mustererkennung– Schlüssel für Industrie 4.0. Forum Robotics, Automation Vision. Hannover Messe Industrie.","mla":"Lohweg, Volker. “Industrielle Bildverarbeitung und Mustererkennung– Schlüssel für Industrie 4.0.” Forum Robotics, Automation Vision, Hannover Messe Industrie, 2013.","ufg":"Lohweg, Volker (2013): Industrielle Bildverarbeitung und Mustererkennung– Schlüssel für Industrie 4.0, in: Forum Robotics, Automation Vision.","ieee":"V. Lohweg, “Industrielle Bildverarbeitung und Mustererkennung– Schlüssel für Industrie 4.0,” in Forum Robotics, Automation Vision, 2013.","apa":"Lohweg, V. (2013). Industrielle Bildverarbeitung und Mustererkennung– Schlüssel für Industrie 4.0. In Forum Robotics, Automation Vision. Hannover Messe Industrie.","chicago":"Lohweg, Volker. “Industrielle Bildverarbeitung und Mustererkennung– Schlüssel für Industrie 4.0.” In Forum Robotics, Automation Vision. Hannover Messe Industrie, 2013."},"department":[{"_id":"DEP5023"}],"author":[{"orcid":"0000-0002-3325-7887","full_name":"Lohweg, Volker","last_name":"Lohweg","id":"1804","first_name":"Volker"}],"year":2013,"publisher":"Hannover Messe Industrie","status":"public","date_created":"2019-12-04T09:12:23Z","type":"conference","publication":"Forum Robotics, Automation Vision","date_updated":"2023-03-15T13:49:39Z","user_id":"45673","_id":"2134","language":[{"iso":"ger"}]},{"department":[{"_id":"DEP5023"}],"year":2013,"author":[{"last_name":"Mönks","id":"1825","full_name":"Mönks, Uwe","first_name":"Uwe"},{"last_name":"Bator","full_name":"Bator, Martyna","first_name":"Martyna","id":"46440"},{"last_name":"Dicks","id":"1853","full_name":"Dicks, Alexander","first_name":"Alexander"},{"last_name":"Lohweg","full_name":"Lohweg, Volker","first_name":"Volker","id":"1804","orcid":"0000-0002-3325-7887"}],"abstract":[{"lang":"ger","text":"Eine Zustandsüberwachung elektrischer Antriebe erfolgt derzeit in der Regel durch Einsatz spezieller Sensorik, bspw. durch Vibrationsmessungen. Außerdem werden die Antriebe lediglich isoliert betrachtet, eine Zusammenführung anfallender Informationen eines räumlich verteilten Antriebsverbunds findet meist nicht statt. Es wird ein neuartiges Motor-as-Sensor-Konzept vorgeschlagen und validiert, das eine antizipatorische Zustandsüberwachung ohne Einsatz zusätzlicher Sensorik allein durch Verarbeitung der phasenbezogenen Motorströme ermöglicht. Zusätzlich wird ein Informationsfusionskonzept vorgestellt, das die Informationen aller im Verbund beteiligten Antriebe zusammenführt, um darüber eine mit weniger Unsicherheiten behaftete Aussage über den Zustand einer Applikation herbeizuführen. Das Hauptaugenmerk liegt hierbei insbesondere auf der Beherrschung der anfallenden riesigen Datenmengen. die zur Verarbeitung in eingebetteten Systemen reduziert werden müssen."}],"page":"305-315","status":"public","publisher":"Universität Paderborn","title":"Informationsfusion mit verteilter elektromotorischer Sensorik im Maschinen- und Anlagenbau","publication_status":"published","citation":{"short":"U. Mönks, M. Bator, A. Dicks, V. Lohweg, Wissenschaftsforum Intelligente Technische Systeme (Heinz Nixdorf Institut, Paderborn) 9. Paderborner Workshop Entwurf mechatronischer Systeme (2013) 305–315.","din1505-2-1":"Mönks, Uwe ; Bator, Martyna ; Dicks, Alexander ; Lohweg, Volker: Informationsfusion mit verteilter elektromotorischer Sensorik im Maschinen- und Anlagenbau. In: Wissenschaftsforum Intelligente Technische Systeme (Heinz Nixdorf Institut, Paderborn) Bd. 9. Paderborner Workshop Entwurf mechatronischer Systeme. Paderborn, Universität Paderborn (2013), S. 305–315","chicago-de":"Mönks, Uwe, Martyna Bator, Alexander Dicks und Volker Lohweg. 2013. Informationsfusion mit verteilter elektromotorischer Sensorik im Maschinen- und Anlagenbau. Wissenschaftsforum Intelligente Technische Systeme (Heinz Nixdorf Institut, Paderborn) 9. Paderborner Workshop Entwurf mechatronischer Systeme: 305–315.","apa":"Mönks, U., Bator, M., Dicks, A., & Lohweg, V. (2013). Informationsfusion mit verteilter elektromotorischer Sensorik im Maschinen- und Anlagenbau. Wissenschaftsforum Intelligente Technische Systeme (Heinz Nixdorf Institut, Paderborn), 9. Paderborner Workshop Entwurf mechatronischer Systeme, 305–315.","ieee":"U. Mönks, M. Bator, A. Dicks, and V. Lohweg, “Informationsfusion mit verteilter elektromotorischer Sensorik im Maschinen- und Anlagenbau,” Wissenschaftsforum Intelligente Technische Systeme (Heinz Nixdorf Institut, Paderborn), vol. 9. Paderborner Workshop Entwurf mechatronischer Systeme, pp. 305–315, 2013.","chicago":"Mönks, Uwe, Martyna Bator, Alexander Dicks, and Volker Lohweg. “Informationsfusion mit verteilter elektromotorischer Sensorik im Maschinen- und Anlagenbau.” Wissenschaftsforum Intelligente Technische Systeme (Heinz Nixdorf Institut, Paderborn) 9. Paderborner Workshop Entwurf mechatronischer Systeme (2013): 305–15.","van":"Mönks U, Bator M, Dicks A, Lohweg V. Informationsfusion mit verteilter elektromotorischer Sensorik im Maschinen- und Anlagenbau. Wissenschaftsforum Intelligente Technische Systeme (Heinz Nixdorf Institut, Paderborn). 2013;9. Paderborner Workshop Entwurf mechatronischer Systeme:305–15.","ama":"Mönks U, Bator M, Dicks A, Lohweg V. Informationsfusion mit verteilter elektromotorischer Sensorik im Maschinen- und Anlagenbau. Wissenschaftsforum Intelligente Technische Systeme (Heinz Nixdorf Institut, Paderborn). 2013;9. Paderborner Workshop Entwurf mechatronischer Systeme:305-315.","ufg":"Mönks, Uwe et. al. (2013): Informationsfusion mit verteilter elektromotorischer Sensorik im Maschinen- und Anlagenbau, in: Wissenschaftsforum Intelligente Technische Systeme (Heinz Nixdorf Institut, Paderborn) 9. Paderborner Workshop Entwurf mechatronischer Systeme, S. 305–315.","bjps":"Mönks U et al. (2013) Informationsfusion mit verteilter elektromotorischer Sensorik im Maschinen- und Anlagenbau. Wissenschaftsforum Intelligente Technische Systeme (Heinz Nixdorf Institut, Paderborn) 9. Paderborner Workshop Entwurf mechatronischer Systeme, 305–315.","havard":"U. Mönks, M. Bator, A. Dicks, V. Lohweg, Informationsfusion mit verteilter elektromotorischer Sensorik im Maschinen- und Anlagenbau, Wissenschaftsforum Intelligente Technische Systeme (Heinz Nixdorf Institut, Paderborn). 9. Paderborner Workshop Entwurf mechatronischer Systeme (2013) 305–315.","mla":"Mönks, Uwe, et al. “Informationsfusion mit verteilter elektromotorischer Sensorik im Maschinen- und Anlagenbau.” Wissenschaftsforum Intelligente Technische Systeme (Heinz Nixdorf Institut, Paderborn), vol. 9. Paderborner Workshop Entwurf mechatronischer Systeme, Universität Paderborn, 2013, pp. 305–15."},"volume":"9. Paderborner Workshop Entwurf mechatronischer Systeme","language":[{"iso":"ger"}],"place":"Paderborn","_id":"2135","date_created":"2019-12-04T09:21:33Z","type":"journal_article","publication":"Wissenschaftsforum Intelligente Technische Systeme (Heinz Nixdorf Institut, Paderborn)","publication_identifier":{"isbn":["978-3-942647-29-8"]},"date_updated":"2023-03-15T13:49:39Z","user_id":"45673"},{"publication_identifier":{"eisbn":["978-1-4799-0864-6"],"isbn":["978-1-4799-0862-2"]},"date_created":"2019-12-04T09:25:43Z","type":"conference","user_id":"45673","date_updated":"2023-03-15T13:49:39Z","oa":"1","_id":"2137","doi":" 10.1109/ETFA.2013.6648126","place":"Cagliari, Italy","language":[{"iso":"eng"}],"title":"Sensorless Drive Diagnosis Using Automated Feature Extraction, Significance Ranking and Reduction.","citation":{"ama":"Bayer C, Bator M, Enge-Rosenblatt O, Mönks U, Dicks A, Lohweg V. Sensorless Drive Diagnosis Using Automated Feature Extraction, Significance Ranking and Reduction. In: Cagliari, Italy: 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA); 2013. doi: 10.1109/ETFA.2013.6648126","ieee":"C. Bayer, M. Bator, O. Enge-Rosenblatt, U. Mönks, A. Dicks, and V. Lohweg, “Sensorless Drive Diagnosis Using Automated Feature Extraction, Significance Ranking and Reduction.,” 2013.","bjps":"Bayer C et al. (2013) Sensorless Drive Diagnosis Using Automated Feature Extraction, Significance Ranking and Reduction. Cagliari, Italy: 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA).","havard":"C. Bayer, M. Bator, O. Enge-Rosenblatt, U. Mönks, A. Dicks, V. Lohweg, Sensorless Drive Diagnosis Using Automated Feature Extraction, Significance Ranking and Reduction., in: 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Cagliari, Italy, 2013.","mla":"Bayer, Christian, et al. Sensorless Drive Diagnosis Using Automated Feature Extraction, Significance Ranking and Reduction. 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2013, doi: 10.1109/ETFA.2013.6648126.","ufg":"Bayer, Christian et. al. (2013): Sensorless Drive Diagnosis Using Automated Feature Extraction, Significance Ranking and Reduction., in: , Cagliari, Italy.","van":"Bayer C, Bator M, Enge-Rosenblatt O, Mönks U, Dicks A, Lohweg V. Sensorless Drive Diagnosis Using Automated Feature Extraction, Significance Ranking and Reduction. In Cagliari, Italy: 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA); 2013.","chicago":"Bayer, Christian, Martyna Bator, Olaf Enge-Rosenblatt, Uwe Mönks, Alexander Dicks, and Volker Lohweg. “Sensorless Drive Diagnosis Using Automated Feature Extraction, Significance Ranking and Reduction.” Cagliari, Italy: 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2013. https://doi.org/ 10.1109/ETFA.2013.6648126.","apa":"Bayer, C., Bator, M., Enge-Rosenblatt, O., Mönks, U., Dicks, A., & Lohweg, V. (2013). Sensorless Drive Diagnosis Using Automated Feature Extraction, Significance Ranking and Reduction. Cagliari, Italy: 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). https://doi.org/ 10.1109/ETFA.2013.6648126","din1505-2-1":"Bayer, Christian ; Bator, Martyna ; Enge-Rosenblatt, Olaf ; Mönks, Uwe ; Dicks, Alexander ; Lohweg, Volker: Sensorless Drive Diagnosis Using Automated Feature Extraction, Significance Ranking and Reduction. In: . Cagliari, Italy : 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2013","chicago-de":"Bayer, Christian, Martyna Bator, Olaf Enge-Rosenblatt, Uwe Mönks, Alexander Dicks und Volker Lohweg. 2013. Sensorless Drive Diagnosis Using Automated Feature Extraction, Significance Ranking and Reduction. In: . Cagliari, Italy: 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). doi: 10.1109/ETFA.2013.6648126, .","short":"C. Bayer, M. Bator, O. Enge-Rosenblatt, U. Mönks, A. Dicks, V. Lohweg, in: 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Cagliari, Italy, 2013."},"publication_status":"published","abstract":[{"text":"Systems for process automation become increasingly complex and also tend to be composed of autonomous subsystems, which is strongly driven by the progress made in information technology. An active field of research is the implementation of monitoring and control at sub-system level using cognitive approaches. In this paper we present a method for autonomous and sensorless condition monitoring of an electric drive train. Based on experiment design we measured phase currents of a physical demonstrator device including mechanical defects and extracted signal features using proper orthogonal decomposition. In favor of classification of different defect states we performed a linear discriminant analysis, which yields appropriate data for a Fuzzy-Pattern-Classification algorithm. As a result we were able to identify different reference defect states as well as previously unknown states.","lang":"eng"}],"year":2013,"author":[{"last_name":"Bayer","first_name":"Christian","full_name":"Bayer, Christian"},{"full_name":"Bator, Martyna","last_name":"Bator","id":"46440","first_name":"Martyna"},{"last_name":"Enge-Rosenblatt","first_name":"Olaf","full_name":"Enge-Rosenblatt, Olaf"},{"id":"1825","full_name":"Mönks, Uwe","first_name":"Uwe","last_name":"Mönks"},{"last_name":"Dicks","first_name":"Alexander","id":"1853","full_name":"Dicks, Alexander"},{"full_name":"Lohweg, Volker","first_name":"Volker","last_name":"Lohweg","id":"1804","orcid":"0000-0002-3325-7887"}],"main_file_link":[{"url":"http://publica.fraunhofer.de/eprints/urn_nbn_de_0011-n-2666279.pdf","open_access":"1"}],"department":[{"_id":"DEP5023"}],"publisher":"18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)","status":"public"},{"title":"Machine Conditioning by Importance Controlled Information Fusion","publication_status":"published","citation":{"short":"U. Mönks, V. Lohweg, in: IEEE (Ed.), 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Cagliari, Italy, 2013.","chicago-de":"Mönks, Uwe und Volker Lohweg. 2013. Machine Conditioning by Importance Controlled Information Fusion. In: 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), hg. von IEEE. Cagliari, Italy. doi:10.1109/ETFA.2013.6647984, .","din1505-2-1":"Mönks, Uwe ; Lohweg, Volker: Machine Conditioning by Importance Controlled Information Fusion. In: IEEE (Hrsg.): 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy, 2013","van":"Mönks U, Lohweg V. Machine Conditioning by Importance Controlled Information Fusion. In: IEEE, editor. 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy; 2013.","mla":"Mönks, Uwe, and Volker Lohweg. “Machine Conditioning by Importance Controlled Information Fusion.” 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), edited by IEEE, 2013, doi:10.1109/ETFA.2013.6647984.","bjps":"Mönks U and Lohweg V (2013) Machine Conditioning by Importance Controlled Information Fusion. In IEEE (ed.), 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy.","havard":"U. Mönks, V. Lohweg, Machine Conditioning by Importance Controlled Information Fusion, in: IEEE (Ed.), 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Cagliari, Italy, 2013.","ufg":"Mönks, Uwe/Lohweg, Volker (2013): Machine Conditioning by Importance Controlled Information Fusion, in: IEEE (Hg.): 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Cagliari, Italy.","apa":"Mönks, U., & Lohweg, V. (2013). Machine Conditioning by Importance Controlled Information Fusion. In IEEE (Ed.), 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy. https://doi.org/10.1109/ETFA.2013.6647984","chicago":"Mönks, Uwe, and Volker Lohweg. “Machine Conditioning by Importance Controlled Information Fusion.” In 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), edited by IEEE. Cagliari, Italy, 2013. https://doi.org/10.1109/ETFA.2013.6647984.","ama":"Mönks U, Lohweg V. Machine Conditioning by Importance Controlled Information Fusion. In: IEEE, ed. 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy; 2013. doi:10.1109/ETFA.2013.6647984","ieee":"U. Mönks and V. Lohweg, “Machine Conditioning by Importance Controlled Information Fusion,” in 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2013."},"department":[{"_id":"DEP5023"}],"year":2013,"author":[{"last_name":"Mönks","first_name":"Uwe","id":"1825","full_name":"Mönks, Uwe"},{"orcid":"0000-0002-3325-7887","full_name":"Lohweg, Volker","id":"1804","last_name":"Lohweg","first_name":"Volker"}],"abstract":[{"text":"Sensor and information fusion is recently a major topic which becomes important in machine diagnosis and conditioning for complex production machines and process engineering. It is a known fact that distributed automation systems have a major impact on signal processing and pattern recognition for machine diagnosis. Therefore, it is necessary to research and develop smart diagnosis methods which are applicable for distributed systems like resource-limited cyber-physical systems. In this paper we propose an new approach for sensor and information fusion based on Evidence Theory and socio-psychological decision-making. We show that context based condition monitoring is instantiated even in conflict situations, oc-curing in real life scenarios permanently. A simple but effective importance measure is proposed which controls the significance of conditioning propositions in a system.","lang":"eng"}],"status":"public","date_created":"2019-12-04T09:30:15Z","type":"conference","publication_identifier":{"isbn":["978-1-4799-0862-2"],"eissn":["1946-0759 "],"eisbn":["978-1-4799-0864-6"],"issn":["1946-0740 "]},"publication":"18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)","date_updated":"2023-03-15T13:49:39Z","user_id":"45673","corporate_editor":["IEEE"],"language":[{"iso":"eng"}],"keyword":["Decision making","Robot sensing systems","Reliability","Production","Context","Fuzzy set theory","Data integration"],"place":"Cagliari, Italy","doi":"10.1109/ETFA.2013.6647984","_id":"2141"},{"type":"conference","user_id":"45673","intvolume":" 46","place":"Karlsruhe","_id":"2142","series_title":"Karlsruher Institut für Technologie, Institut für Angewandte Informatik, Automatisierungstechnik. Schriftenreihe","publication_status":"published","department":[{"_id":"DEP5023"}],"conference":{"start_date":"2013-12-05","end_date":"2013-12-06","location":"Dortmund","name":"23. Workshop Computational Intelligence 2013. Proceedings"},"abstract":[{"text":"Die aktive Zustandsüberwachung von Automatisierungssystemen rückt immer weiter in den Vordergrund und ist daher ein zentraler Forschungsgegenstand. In diesem Beitrag werden Ansätze der sensorlosen Überwachung eines Synchronmotors diskutiert. Basierend auf Messungen der Phasenströme des Motors werden mit der Hilbert-Transformation bzw. mit der Empirical Mode Decomposition charakteristische Merkmale aus den Signalen berechnet. Anschließend werden diese mittels Hauptkomponentenanalyse bzw. der linearen Diskriminanzanalyse reduziert. Die daraus berechneten Charakteristischen Merkmale dienen als Grundlage für die abschließende Fuzzy-Pattern-Klassifikation. Basierend auf dem erläuterten Ansatz ist die Identifikation typischer Betriebs- bzw. Fehlerzustände, aber auch das Erkennen nicht gelernter Zustände möglich. Das dabei vorgestellte Vorgehen ist vergleichsweise generisch und lässt sich gut auf andere Anwendungsgebiete übertragen.","lang":"ger"}],"publisher":"KIT Scientific Publishing","publication_identifier":{"isbn":["978-3-7315-0126-8"]},"publication":"23. Workshop Computational Intelligence 2013. Proceedings","date_created":"2019-12-04T09:35:47Z","date_updated":"2023-03-15T13:49:39Z","editor":[{"last_name":"Hoffmann","first_name":"F.","full_name":"Hoffmann, F."}],"oa":"1","language":[{"iso":"ger"}],"title":"Sensorlose Zustandsüberwachung an Synchronmotoren.","volume":46,"citation":{"short":"F. Paschke, C. Bayer, M. Bator, U. Mönks, A. Dicks, O. Enge-Rosenblatt, V. Lohweg, in: F. Hoffmann (Ed.), 23. Workshop Computational Intelligence 2013. Proceedings, KIT Scientific Publishing, Karlsruhe, 2013, pp. 211–225.","chicago-de":"Paschke, Fabian, Christian Bayer, Martyna Bator, Uwe Mönks, Alexander Dicks, Olaf Enge-Rosenblatt und Volker Lohweg. 2013. Sensorlose Zustandsüberwachung an Synchronmotoren. In: 23. Workshop Computational Intelligence 2013. Proceedings, hg. von F. Hoffmann, 46:211–225. Karlsruher Institut für Technologie, Institut für Angewandte Informatik, Automatisierungstechnik. Schriftenreihe. Karlsruhe: KIT Scientific Publishing.","din1505-2-1":"Paschke, Fabian ; Bayer, Christian ; Bator, Martyna ; Mönks, Uwe ; Dicks, Alexander ; Enge-Rosenblatt, Olaf ; Lohweg, Volker: Sensorlose Zustandsüberwachung an Synchronmotoren. In: Hoffmann, F. (Hrsg.): 23. Workshop Computational Intelligence 2013. Proceedings, Karlsruher Institut für Technologie, Institut für Angewandte Informatik, Automatisierungstechnik. Schriftenreihe. Bd. 46. Karlsruhe : KIT Scientific Publishing, 2013, S. 211–225","apa":"Paschke, F., Bayer, C., Bator, M., Mönks, U., Dicks, A., Enge-Rosenblatt, O., & Lohweg, V. (2013). Sensorlose Zustandsüberwachung an Synchronmotoren. In F. Hoffmann (Ed.), 23. Workshop Computational Intelligence 2013. Proceedings (Vol. 46, pp. 211–225). Karlsruhe: KIT Scientific Publishing.","ieee":"F. Paschke et al., “Sensorlose Zustandsüberwachung an Synchronmotoren.,” in 23. Workshop Computational Intelligence 2013. Proceedings, Dortmund, 2013, vol. 46, pp. 211–225.","chicago":"Paschke, Fabian, Christian Bayer, Martyna Bator, Uwe Mönks, Alexander Dicks, Olaf Enge-Rosenblatt, and Volker Lohweg. “Sensorlose Zustandsüberwachung an Synchronmotoren.” In 23. Workshop Computational Intelligence 2013. Proceedings, edited by F. Hoffmann, 46:211–25. Karlsruher Institut für Technologie, Institut für Angewandte Informatik, Automatisierungstechnik. Schriftenreihe. Karlsruhe: KIT Scientific Publishing, 2013.","van":"Paschke F, Bayer C, Bator M, Mönks U, Dicks A, Enge-Rosenblatt O, et al. Sensorlose Zustandsüberwachung an Synchronmotoren. In: Hoffmann F, editor. 23 Workshop Computational Intelligence 2013 Proceedings. Karlsruhe: KIT Scientific Publishing; 2013. p. 211–25. (Karlsruher Institut für Technologie, Institut für Angewandte Informatik, Automatisierungstechnik. Schriftenreihe; vol. 46).","ama":"Paschke F, Bayer C, Bator M, et al. Sensorlose Zustandsüberwachung an Synchronmotoren. In: Hoffmann F, ed. 23. Workshop Computational Intelligence 2013. Proceedings. Vol 46. Karlsruher Institut für Technologie, Institut für Angewandte Informatik, Automatisierungstechnik. Schriftenreihe. Karlsruhe: KIT Scientific Publishing; 2013:211-225.","ufg":"Paschke, Fabian et. al. (2013): Sensorlose Zustandsüberwachung an Synchronmotoren., in: F. Hoffmann (Hg.): 23. Workshop Computational Intelligence 2013. Proceedings (=Karlsruher Institut für Technologie, Institut für Angewandte Informatik, Automatisierungstechnik. Schriftenreihe 46), Karlsruhe, S. 211–225.","havard":"F. Paschke, C. Bayer, M. Bator, U. Mönks, A. Dicks, O. Enge-Rosenblatt, V. Lohweg, Sensorlose Zustandsüberwachung an Synchronmotoren., in: F. Hoffmann (Ed.), 23. Workshop Computational Intelligence 2013. Proceedings, KIT Scientific Publishing, Karlsruhe, 2013: pp. 211–225.","bjps":"Paschke F et al. (2013) Sensorlose Zustandsüberwachung an Synchronmotoren. In Hoffmann F (ed.), 23. Workshop Computational Intelligence 2013. Proceedings, vol. 46. Karlsruhe: KIT Scientific Publishing, pp. 211–225.","mla":"Paschke, Fabian, et al. “Sensorlose Zustandsüberwachung an Synchronmotoren.” 23. Workshop Computational Intelligence 2013. Proceedings, edited by F. Hoffmann, vol. 46, KIT Scientific Publishing, 2013, pp. 211–25."},"main_file_link":[{"url":"http://publica.fraunhofer.de/eprints/urn_nbn_de_0011-n-2754970.pdf","open_access":"1"}],"author":[{"full_name":"Paschke, Fabian","last_name":"Paschke","first_name":"Fabian"},{"last_name":"Bayer","first_name":"Christian","full_name":"Bayer, Christian"},{"id":"46440","full_name":"Bator, Martyna","first_name":"Martyna","last_name":"Bator"},{"full_name":"Mönks, Uwe","last_name":"Mönks","id":"1825","first_name":"Uwe"},{"last_name":"Dicks","first_name":"Alexander","full_name":"Dicks, Alexander","id":"1853"},{"full_name":"Enge-Rosenblatt, Olaf","last_name":"Enge-Rosenblatt","first_name":"Olaf"},{"full_name":"Lohweg, Volker","first_name":"Volker","id":"1804","last_name":"Lohweg","orcid":"0000-0002-3325-7887"}],"year":2013,"status":"public","page":"211-225"},{"citation":{"chicago":"Mönks, Uwe, Steffen Priesterjahn, and Volker Lohweg. “Automated Fusion Attribute Generation for Conditioning Monitoring.” In 23. Workshop Computational Intelligence, 05.-06.12.2013, Dortmund VDI/VDE-Gesellschaft Mess- Und Automatisierungstechnik (GMA), Düsseldorf , 46:339–54. Schriftenreihe Des Instituts Für Angewandte Informatik - Automatisierungstechnik, Karlsruher Institut Für Technologie . Karlsruhe: KIT Scientific Publishing, 2013. https://doi.org/DOI: 10.5445/KSP/1000036887 .","apa":"Mönks, U., Priesterjahn, S., & Lohweg, V. (2013). Automated Fusion Attribute Generation for Conditioning Monitoring. In 23. Workshop Computational Intelligence, 05.-06.12.2013, Dortmund VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), Düsseldorf (Vol. 46, pp. 339–354). Karlsruhe: KIT Scientific Publishing. https://doi.org/DOI: 10.5445/KSP/1000036887 ","bjps":"Mönks U, Priesterjahn S and Lohweg V (2013) Automated Fusion Attribute Generation for Conditioning Monitoring. 23. Workshop Computational Intelligence, 05.-06.12.2013, Dortmund VDI/VDE-Gesellschaft Mess- Und Automatisierungstechnik (GMA), Düsseldorf , vol. 46. Karlsruhe: KIT Scientific Publishing, pp. 339–354.","havard":"U. Mönks, S. Priesterjahn, V. Lohweg, Automated Fusion Attribute Generation for Conditioning Monitoring., in: 23. Workshop Computational Intelligence, 05.-06.12.2013, Dortmund VDI/VDE-Gesellschaft Mess- Und Automatisierungstechnik (GMA), Düsseldorf , KIT Scientific Publishing, Karlsruhe, 2013: pp. 339–354.","mla":"Mönks, Uwe, et al. “Automated Fusion Attribute Generation for Conditioning Monitoring.” 23. Workshop Computational Intelligence, 05.-06.12.2013, Dortmund VDI/VDE-Gesellschaft Mess- Und Automatisierungstechnik (GMA), Düsseldorf , vol. 46, KIT Scientific Publishing, 2013, pp. 339–54, doi:DOI: 10.5445/KSP/1000036887 .","ufg":"Mönks, Uwe et. al. (2013): Automated Fusion Attribute Generation for Conditioning Monitoring., in: 23. Workshop Computational Intelligence, 05.-06.12.2013, Dortmund VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), Düsseldorf (=Schriftenreihe des Instituts für Angewandte Informatik - Automatisierungstechnik, Karlsruher Institut für Technologie 46), Karlsruhe, S. 339–354.","van":"Mönks U, Priesterjahn S, Lohweg V. Automated Fusion Attribute Generation for Conditioning Monitoring. In: 23 Workshop Computational Intelligence, 05-06122013, Dortmund VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), Düsseldorf . Karlsruhe: KIT Scientific Publishing; 2013. p. 339–54. (Schriftenreihe des Instituts für Angewandte Informatik - Automatisierungstechnik, Karlsruher Institut für Technologie ; vol. 46).","chicago-de":"Mönks, Uwe, Steffen Priesterjahn und Volker Lohweg. 2013. Automated Fusion Attribute Generation for Conditioning Monitoring. In: 23. Workshop Computational Intelligence, 05.-06.12.2013, Dortmund VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), Düsseldorf , 46:339–354. Schriftenreihe des Instituts für Angewandte Informatik - Automatisierungstechnik, Karlsruher Institut für Technologie . Karlsruhe: KIT Scientific Publishing. doi:DOI: 10.5445/KSP/1000036887 , .","din1505-2-1":"Mönks, Uwe ; Priesterjahn, Steffen ; Lohweg, Volker: Automated Fusion Attribute Generation for Conditioning Monitoring. In: 23. Workshop Computational Intelligence, 05.-06.12.2013, Dortmund VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), Düsseldorf , Schriftenreihe des Instituts für Angewandte Informatik - Automatisierungstechnik, Karlsruher Institut für Technologie . Bd. 46. Karlsruhe : KIT Scientific Publishing, 2013, S. 339–354","short":"U. Mönks, S. Priesterjahn, V. Lohweg, in: 23. Workshop Computational Intelligence, 05.-06.12.2013, Dortmund VDI/VDE-Gesellschaft Mess- Und Automatisierungstechnik (GMA), Düsseldorf , KIT Scientific Publishing, Karlsruhe, 2013, pp. 339–354.","ieee":"U. Mönks, S. Priesterjahn, and V. Lohweg, “Automated Fusion Attribute Generation for Conditioning Monitoring.,” in 23. Workshop Computational Intelligence, 05.-06.12.2013, Dortmund VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), Düsseldorf , 2013, vol. 46, pp. 339–354.","ama":"Mönks U, Priesterjahn S, Lohweg V. Automated Fusion Attribute Generation for Conditioning Monitoring. In: 23. Workshop Computational Intelligence, 05.-06.12.2013, Dortmund VDI/VDE-Gesellschaft Mess- Und Automatisierungstechnik (GMA), Düsseldorf . Vol 46. Schriftenreihe des Instituts für Angewandte Informatik - Automatisierungstechnik, Karlsruher Institut für Technologie . Karlsruhe: KIT Scientific Publishing; 2013:339-354. doi:DOI: 10.5445/KSP/1000036887 "},"volume":46,"title":"Automated Fusion Attribute Generation for Conditioning Monitoring.","series_title":"Schriftenreihe des Instituts für Angewandte Informatik - Automatisierungstechnik, Karlsruher Institut für Technologie ","publisher":"KIT Scientific Publishing","page":"339-354","status":"public","department":[{"_id":"DEP5023"}],"main_file_link":[{"url":"https://publikationen.bibliothek.kit.edu/1000036887","open_access":"1"}],"year":2013,"author":[{"last_name":"Mönks","id":"1825","first_name":"Uwe","full_name":"Mönks, Uwe"},{"first_name":"Steffen","full_name":"Priesterjahn, Steffen","last_name":"Priesterjahn"},{"orcid":"0000-0002-3325-7887","id":"1804","last_name":"Lohweg","first_name":"Volker","full_name":"Lohweg, Volker"}],"intvolume":" 46","date_updated":"2023-03-15T13:49:39Z","user_id":"45673","date_created":"2019-12-04T09:42:45Z","type":"conference","publication":"23. Workshop Computational Intelligence, 05.-06.12.2013, Dortmund VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), Düsseldorf ","publication_identifier":{"isbn":["978-3-7315-0126-8"],"issn":["1614-5267"]},"doi":"DOI: 10.5445/KSP/1000036887 ","_id":"2144","language":[{"iso":"eng"}],"place":"Karlsruhe","oa":"1"},{"publication":"Current Mibrobiology ","type":"journal_article","date_created":"2020-05-25T09:26:02Z","intvolume":" 67","user_id":"83778","date_updated":"2024-05-17T12:29:48Z","_id":"2580","language":[{"iso":"eng"}],"title":"Antimicrobial activity of essential oil components against important food spoilage microorganisms","citation":{"havard":"G. Klein, C. Rüben, M. Upmann, Antimicrobial activity of essential oil components against important food spoilage microorganisms, Current Mibrobiology . 67 (2013) 200–208.","bjps":"Klein G, Rüben C and Upmann M (2013) Antimicrobial Activity of Essential Oil Components against Important Food Spoilage Microorganisms. Current Mibrobiology 67, 200–208.","mla":"Klein, G., et al. “Antimicrobial Activity of Essential Oil Components against Important Food Spoilage Microorganisms.” Current Mibrobiology , vol. 67, 2013, pp. 200–08.","ufg":"Klein, G./Rüben, C./Upmann, Matthias: Antimicrobial activity of essential oil components against important food spoilage microorganisms, in: Current Mibrobiology 67 (2013), S. 200–208.","van":"Klein G, Rüben C, Upmann M. Antimicrobial activity of essential oil components against important food spoilage microorganisms. Current Mibrobiology . 2013;67:200–8.","chicago":"Klein, G., C. Rüben, and Matthias Upmann. “Antimicrobial Activity of Essential Oil Components against Important Food Spoilage Microorganisms.” Current Mibrobiology 67 (2013): 200–208.","apa":"Klein, G., Rüben, C., & Upmann, M. (2013). Antimicrobial activity of essential oil components against important food spoilage microorganisms. Current Mibrobiology , 67, 200–208.","chicago-de":"Klein, G., C. Rüben und Matthias Upmann. 2013. Antimicrobial activity of essential oil components against important food spoilage microorganisms. Current Mibrobiology 67: 200–208.","din1505-2-1":"Klein, G. ; Rüben, C. ; Upmann, Matthias: Antimicrobial activity of essential oil components against important food spoilage microorganisms. In: Current Mibrobiology Bd. 67 (2013), S. 200–208","short":"G. Klein, C. Rüben, M. Upmann, Current Mibrobiology 67 (2013) 200–208.","ama":"Klein G, Rüben C, Upmann M. Antimicrobial activity of essential oil components against important food spoilage microorganisms. Current Mibrobiology . 2013;67:200-208.","ieee":"G. Klein, C. Rüben, and M. Upmann, “Antimicrobial activity of essential oil components against important food spoilage microorganisms,” Current Mibrobiology , vol. 67, pp. 200–208, 2013."},"volume":67,"publication_status":"published","year":"2013","author":[{"first_name":"G.","last_name":"Klein","full_name":"Klein, G."},{"full_name":"Rüben, C.","last_name":"Rüben","first_name":"C."},{"last_name":"Upmann","full_name":"Upmann, Matthias","first_name":"Matthias","id":"12666"}],"department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"status":"public","page":"200-208"},{"type":"conference","date_created":"2020-05-25T09:33:02Z","date_updated":"2024-05-17T12:30:39Z","user_id":"83778","_id":"2582","language":[{"iso":"eng"}],"title":"Mechanically separated meat (MSM): EFSA assessment on public health risks and parameters for classification","publication_status":"published","citation":{"chicago":"Broglia, A., M. Hugas, D. Bolton, K. Koutsoumanis, M. Michalski, M. Petracci, Matthias Upmann, and J. Sofos. “Mechanically Separated Meat (MSM): EFSA Assessment on Public Health Risks and Parameters for Classification,” 2013.","apa":"Broglia, A., Hugas, M., Bolton, D., Koutsoumanis, K., Michalski, M., Petracci, M., Upmann, M., & Sofos, J. (2013). Mechanically separated meat (MSM): EFSA assessment on public health risks and parameters for classification. XXI European Symposium on the Quality of Poultry Meat, Bergamo (Italien).","havard":"A. Broglia, M. Hugas, D. Bolton, K. Koutsoumanis, M. Michalski, M. Petracci, M. Upmann, J. Sofos, Mechanically separated meat (MSM): EFSA assessment on public health risks and parameters for classification, in: 2013.","mla":"Broglia, A., et al. Mechanically Separated Meat (MSM): EFSA Assessment on Public Health Risks and Parameters for Classification. 2013.","bjps":"Broglia A et al. (2013) Mechanically Separated Meat (MSM): EFSA Assessment on Public Health Risks and Parameters for Classification.","ufg":"Broglia, A. u. a.: Mechanically separated meat (MSM): EFSA assessment on public health risks and parameters for classification, in: o. Hg.: o. O. 2013.","van":"Broglia A, Hugas M, Bolton D, Koutsoumanis K, Michalski M, Petracci M, et al. Mechanically separated meat (MSM): EFSA assessment on public health risks and parameters for classification. In 2013.","chicago-de":"Broglia, A., M. Hugas, D. Bolton, K. Koutsoumanis, M. Michalski, M. Petracci, Matthias Upmann und J. Sofos. 2013. Mechanically separated meat (MSM): EFSA assessment on public health risks and parameters for classification. In: .","din1505-2-1":"Broglia, A. ; Hugas, M. ; Bolton, D. ; Koutsoumanis, K. ; Michalski, M. ; Petracci, M. ; Upmann, Matthias ; Sofos, J.: Mechanically separated meat (MSM): EFSA assessment on public health risks and parameters for classification. In: , 2013","short":"A. Broglia, M. Hugas, D. Bolton, K. Koutsoumanis, M. Michalski, M. Petracci, M. Upmann, J. Sofos, in: 2013.","ieee":"A. Broglia et al., “Mechanically separated meat (MSM): EFSA assessment on public health risks and parameters for classification,” presented at the XXI European Symposium on the Quality of Poultry Meat, Bergamo (Italien), 2013.","ama":"Broglia A, Hugas M, Bolton D, et al. Mechanically separated meat (MSM): EFSA assessment on public health risks and parameters for classification. In: ; 2013."},"conference":{"end_date":"2013-09-19","start_date":"2013-09-15","location":"Bergamo (Italien)","name":"XXI European Symposium on the Quality of Poultry Meat"},"department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"year":"2013","author":[{"last_name":"Broglia","first_name":"A.","full_name":"Broglia, A."},{"full_name":"Hugas, M.","last_name":"Hugas","first_name":"M."},{"first_name":"D.","last_name":"Bolton","full_name":"Bolton, D."},{"first_name":"K.","last_name":"Koutsoumanis","full_name":"Koutsoumanis, K."},{"first_name":"M.","full_name":"Michalski, M.","last_name":"Michalski"},{"first_name":"M.","full_name":"Petracci, M.","last_name":"Petracci"},{"id":"12666","last_name":"Upmann","first_name":"Matthias","full_name":"Upmann, Matthias"},{"last_name":"Sofos","first_name":"J.","full_name":"Sofos, J."}],"status":"public"},{"title":"Histologische Beurteilung von Kochpökelwaren","publication_status":"published","citation":{"short":"M. Upmann, in: 2013.","din1505-2-1":"Upmann, Matthias: Histologische Beurteilung von Kochpökelwaren. In: , 2013","chicago-de":"Upmann, Matthias. 2013. Histologische Beurteilung von Kochpökelwaren. In: .","apa":"Upmann, M. (2013). Histologische Beurteilung von Kochpökelwaren. Fortbildungsveranstaltung “Neue Technologien zur Herstellung von Kochschinken,” Lemgo.","ieee":"M. Upmann, “Histologische Beurteilung von Kochpökelwaren,” presented at the Fortbildungsveranstaltung “Neue Technologien zur Herstellung von Kochschinken,” Lemgo, 2013.","chicago":"Upmann, Matthias. “Histologische Beurteilung von Kochpökelwaren,” 2013.","van":"Upmann M. Histologische Beurteilung von Kochpökelwaren. In 2013.","ama":"Upmann M. Histologische Beurteilung von Kochpökelwaren. In: ; 2013.","ufg":"Upmann, Matthias: Histologische Beurteilung von Kochpökelwaren, in: o. Hg.: o. O. 2013.","havard":"M. Upmann, Histologische Beurteilung von Kochpökelwaren, in: 2013.","bjps":"Upmann M (2013) Histologische Beurteilung von Kochpökelwaren.","mla":"Upmann, Matthias. Histologische Beurteilung von Kochpökelwaren. 2013."},"department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"conference":{"start_date":"2013-04-10","end_date":"2013-04-10","location":"Lemgo","name":"Fortbildungsveranstaltung \"Neue Technologien zur Herstellung von Kochschinken\""},"year":"2013","author":[{"full_name":"Upmann, Matthias","last_name":"Upmann","id":"12666","first_name":"Matthias"}],"status":"public","date_created":"2020-05-25T09:34:40Z","type":"conference","date_updated":"2024-05-17T12:31:07Z","user_id":"83778","language":[{"iso":"ger"}],"_id":"2583"},{"status":"public","author":[{"first_name":"Matthias","id":"12666","last_name":"Upmann","full_name":"Upmann, Matthias"},{"id":"12647","last_name":"Hölscher","full_name":"Hölscher, Maike","first_name":"Maike"},{"full_name":"Kelliger, H.","first_name":"H.","last_name":"Kelliger"},{"full_name":"Müller, T.","last_name":"Müller","first_name":"T."},{"first_name":"Achim","full_name":"Stiebing, Achim","id":"12235","last_name":"Stiebing"}],"year":"2013","department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"conference":{"name":"Innovationsförderung für die Food-Branche - Erfahrungen und Potentiale. EEN - NRW, Cluster Ernährung","location":"Lemgo","end_date":"2013-05-15","start_date":"2013-05-15"},"citation":{"short":"M. Upmann, M. Hölscher, H. Kelliger, T. Müller, A. Stiebing, in: 2013.","chicago-de":"Upmann, Matthias, Maike Hölscher, H. Kelliger, T. Müller und Achim Stiebing. 2013. Projekt 3: EtNaFleisch- Innovationsförderung für die Food-Branche - Erfahrungen und Potentiale. In: .","din1505-2-1":"Upmann, Matthias ; Hölscher, Maike ; Kelliger, H. ; Müller, T. ; Stiebing, Achim: Projekt 3: EtNaFleisch- Innovationsförderung für die Food-Branche - Erfahrungen und Potentiale. In: , 2013","van":"Upmann M, Hölscher M, Kelliger H, Müller T, Stiebing A. Projekt 3: EtNaFleisch- Innovationsförderung für die Food-Branche - Erfahrungen und Potentiale. In 2013.","bjps":"Upmann M et al. (2013) Projekt 3: EtNaFleisch- Innovationsförderung Für Die Food-Branche - Erfahrungen Und Potentiale.","mla":"Upmann, Matthias, et al. Projekt 3: EtNaFleisch- Innovationsförderung Für Die Food-Branche - Erfahrungen Und Potentiale. 2013.","havard":"M. Upmann, M. Hölscher, H. Kelliger, T. Müller, A. Stiebing, Projekt 3: EtNaFleisch- Innovationsförderung für die Food-Branche - Erfahrungen und Potentiale, in: 2013.","ufg":"Upmann, Matthias u. a.: Projekt 3: EtNaFleisch- Innovationsförderung für die Food-Branche - Erfahrungen und Potentiale, in: o. Hg.: o. O. 2013.","apa":"Upmann, M., Hölscher, M., Kelliger, H., Müller, T., & Stiebing, A. (2013). Projekt 3: EtNaFleisch- Innovationsförderung für die Food-Branche - Erfahrungen und Potentiale. Innovationsförderung für die Food-Branche - Erfahrungen und Potentiale. EEN - NRW, Cluster Ernährung, Lemgo.","chicago":"Upmann, Matthias, Maike Hölscher, H. Kelliger, T. Müller, and Achim Stiebing. “Projekt 3: EtNaFleisch- Innovationsförderung Für Die Food-Branche - Erfahrungen Und Potentiale,” 2013.","ama":"Upmann M, Hölscher M, Kelliger H, Müller T, Stiebing A. Projekt 3: EtNaFleisch- Innovationsförderung für die Food-Branche - Erfahrungen und Potentiale. In: ; 2013.","ieee":"M. Upmann, M. Hölscher, H. Kelliger, T. Müller, and A. Stiebing, “Projekt 3: EtNaFleisch- Innovationsförderung für die Food-Branche - Erfahrungen und Potentiale,” presented at the Innovationsförderung für die Food-Branche - Erfahrungen und Potentiale. EEN - NRW, Cluster Ernährung, Lemgo, 2013."},"title":"Projekt 3: EtNaFleisch- Innovationsförderung für die Food-Branche - Erfahrungen und Potentiale","language":[{"iso":"eng"}],"_id":"2584","user_id":"83778","date_updated":"2024-05-17T12:31:33Z","type":"conference","date_created":"2020-05-25T13:16:55Z"},{"conference":{"end_date":"2013-09-27","start_date":"2013-09-24","name":"54. Arbeitstagung des Arbeitsgebietes \"Lebensmittelhygiene\"","location":"Garmisch-Partenkirchen"},"department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"author":[{"full_name":"Upmann, Matthias","last_name":"Upmann","first_name":"Matthias","id":"12666"},{"last_name":"Tölke","first_name":"M.","full_name":"Tölke, M."},{"last_name":"Röser","first_name":"Anja","full_name":"Röser, Anja","id":"12158"}],"year":"2013","status":"public","title":"Semiquantitative Bestimmung verschiedener Stärkearten mit Hilfe der histologischen Untersuchung","publication_status":"published","citation":{"din1505-2-1":"Upmann, Matthias ; Tölke, M. ; Röser, Anja: Semiquantitative Bestimmung verschiedener Stärkearten mit Hilfe der histologischen Untersuchung. In: , 2013","chicago-de":"Upmann, Matthias, M. Tölke und Anja Röser. 2013. Semiquantitative Bestimmung verschiedener Stärkearten mit Hilfe der histologischen Untersuchung. In: .","short":"M. Upmann, M. Tölke, A. Röser, in: 2013.","chicago":"Upmann, Matthias, M. Tölke, and Anja Röser. “Semiquantitative Bestimmung verschiedener Stärkearten mit Hilfe der histologischen Untersuchung,” 2013.","apa":"Upmann, M., Tölke, M., & Röser, A. (2013). Semiquantitative Bestimmung verschiedener Stärkearten mit Hilfe der histologischen Untersuchung. 54. Arbeitstagung des Arbeitsgebietes “Lebensmittelhygiene,” Garmisch-Partenkirchen.","ufg":"Upmann, Matthias/Tölke, M./Röser, Anja: Semiquantitative Bestimmung verschiedener Stärkearten mit Hilfe der histologischen Untersuchung, in: o. Hg.: o. O. 2013.","mla":"Upmann, Matthias, et al. Semiquantitative Bestimmung verschiedener Stärkearten mit Hilfe der histologischen Untersuchung. 2013.","bjps":"Upmann M, Tölke M and Röser A (2013) Semiquantitative Bestimmung verschiedener Stärkearten mit Hilfe der histologischen Untersuchung.","havard":"M. Upmann, M. Tölke, A. Röser, Semiquantitative Bestimmung verschiedener Stärkearten mit Hilfe der histologischen Untersuchung, in: 2013.","van":"Upmann M, Tölke M, Röser A. Semiquantitative Bestimmung verschiedener Stärkearten mit Hilfe der histologischen Untersuchung. In 2013.","ieee":"M. Upmann, M. Tölke, and A. Röser, “Semiquantitative Bestimmung verschiedener Stärkearten mit Hilfe der histologischen Untersuchung,” presented at the 54. Arbeitstagung des Arbeitsgebietes “Lebensmittelhygiene,” Garmisch-Partenkirchen, 2013.","ama":"Upmann M, Tölke M, Röser A. Semiquantitative Bestimmung verschiedener Stärkearten mit Hilfe der histologischen Untersuchung. In: ; 2013."},"_id":"2585","language":[{"iso":"ger"}],"date_created":"2020-05-25T13:20:09Z","type":"conference_abstract","date_updated":"2024-05-17T12:31:59Z","user_id":"83778"},{"page":"87-91","status":"public","department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"year":"2013","author":[{"first_name":"T.","full_name":"Grünewald, T.","last_name":"Grünewald"},{"full_name":"Gerhardt, T.","first_name":"T.","last_name":"Gerhardt"},{"id":"12666","first_name":"Matthias","last_name":"Upmann","full_name":"Upmann, Matthias"},{"first_name":"G.","full_name":"Hildebrandt, G.","last_name":"Hildebrandt"}],"issue":"8","publication_status":"published","citation":{"chicago-de":"Grünewald, T., T. Gerhardt, Matthias Upmann und G. Hildebrandt. 2013. Gewebliche Beschaffenheit von Kochpökelwaren. ALTS-Laborvergleichsuntersuchung zur histologischen Quantifizierung von Strukturzerstörungen. Fleischwirtschaft 93, Nr. 8: 87–91.","din1505-2-1":"Grünewald, T. ; Gerhardt, T. ; Upmann, Matthias ; Hildebrandt, G.: Gewebliche Beschaffenheit von Kochpökelwaren. ALTS-Laborvergleichsuntersuchung zur histologischen Quantifizierung von Strukturzerstörungen. In: Fleischwirtschaft Bd. 93 (2013), Nr. 8, S. 87–91","short":"T. Grünewald, T. Gerhardt, M. Upmann, G. Hildebrandt, Fleischwirtschaft 93 (2013) 87–91.","mla":"Grünewald, T., et al. “Gewebliche Beschaffenheit von Kochpökelwaren. ALTS-Laborvergleichsuntersuchung zur histologischen Quantifizierung von Strukturzerstörungen.” Fleischwirtschaft, vol. 93, no. 8, 2013, pp. 87–91.","havard":"T. Grünewald, T. Gerhardt, M. Upmann, G. Hildebrandt, Gewebliche Beschaffenheit von Kochpökelwaren. ALTS-Laborvergleichsuntersuchung zur histologischen Quantifizierung von Strukturzerstörungen, Fleischwirtschaft. 93 (2013) 87–91.","bjps":"Grünewald T et al. (2013) Gewebliche Beschaffenheit von Kochpökelwaren. ALTS-Laborvergleichsuntersuchung zur histologischen Quantifizierung von Strukturzerstörungen. Fleischwirtschaft 93, 87–91.","ufg":"Grünewald, T. u. a.: Gewebliche Beschaffenheit von Kochpökelwaren. ALTS-Laborvergleichsuntersuchung zur histologischen Quantifizierung von Strukturzerstörungen, in: Fleischwirtschaft 93 (2013), H. 8, S. 87–91.","van":"Grünewald T, Gerhardt T, Upmann M, Hildebrandt G. Gewebliche Beschaffenheit von Kochpökelwaren. ALTS-Laborvergleichsuntersuchung zur histologischen Quantifizierung von Strukturzerstörungen. Fleischwirtschaft. 2013;93(8):87–91.","chicago":"Grünewald, T., T. Gerhardt, Matthias Upmann, and G. Hildebrandt. “Gewebliche Beschaffenheit von Kochpökelwaren. ALTS-Laborvergleichsuntersuchung zur histologischen Quantifizierung von Strukturzerstörungen.” Fleischwirtschaft 93, no. 8 (2013): 87–91.","apa":"Grünewald, T., Gerhardt, T., Upmann, M., & Hildebrandt, G. (2013). Gewebliche Beschaffenheit von Kochpökelwaren. ALTS-Laborvergleichsuntersuchung zur histologischen Quantifizierung von Strukturzerstörungen. Fleischwirtschaft, 93(8), 87–91.","ama":"Grünewald T, Gerhardt T, Upmann M, Hildebrandt G. Gewebliche Beschaffenheit von Kochpökelwaren. ALTS-Laborvergleichsuntersuchung zur histologischen Quantifizierung von Strukturzerstörungen. Fleischwirtschaft. 2013;93(8):87-91.","ieee":"T. Grünewald, T. Gerhardt, M. Upmann, and G. Hildebrandt, “Gewebliche Beschaffenheit von Kochpökelwaren. ALTS-Laborvergleichsuntersuchung zur histologischen Quantifizierung von Strukturzerstörungen,” Fleischwirtschaft, vol. 93, no. 8, pp. 87–91, 2013."},"volume":93,"title":"Gewebliche Beschaffenheit von Kochpökelwaren. ALTS-Laborvergleichsuntersuchung zur histologischen Quantifizierung von Strukturzerstörungen","language":[{"iso":"ger"}],"_id":"2586","date_updated":"2024-05-17T12:32:23Z","user_id":"83778","intvolume":" 93","date_created":"2020-05-25T13:22:08Z","type":"journal_article","publication":"Fleischwirtschaft"},{"language":[{"iso":"ger"}],"_id":"2587","user_id":"83778","date_updated":"2024-05-17T12:32:47Z","type":"conference","date_created":"2020-05-25T13:24:02Z","status":"public","year":"2013","author":[{"full_name":"Upmann, Matthias","first_name":"Matthias","last_name":"Upmann","id":"12666"}],"conference":{"end_date":"2013-06-14","start_date":"2013-06-13","location":"Hagen","name":"Fachtagung des Gissel-Instituts 2013"},"department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"citation":{"ieee":"M. Upmann, “Separatorenfleisch,” presented at the Fachtagung des Gissel-Instituts 2013, Hagen, 2013.","ama":"Upmann M. Separatorenfleisch. In: ; 2013.","short":"M. Upmann, in: 2013.","chicago-de":"Upmann, Matthias. 2013. Separatorenfleisch. In: .","din1505-2-1":"Upmann, Matthias: Separatorenfleisch. In: , 2013","apa":"Upmann, M. (2013). Separatorenfleisch. Fachtagung des Gissel-Instituts 2013, Hagen.","chicago":"Upmann, Matthias. “Separatorenfleisch,” 2013.","van":"Upmann M. Separatorenfleisch. In 2013.","ufg":"Upmann, Matthias: Separatorenfleisch, in: o. Hg.: o. O. 2013.","havard":"M. Upmann, Separatorenfleisch, in: 2013.","mla":"Upmann, Matthias. Separatorenfleisch. 2013.","bjps":"Upmann M (2013) Separatorenfleisch."},"publication_status":"published","title":"Separatorenfleisch"},{"title":"Separatorenfleisch. Möglichkeiten und Grenzen des Nachweises unterschiedlicher Qualitäten","citation":{"ieee":"M. Upmann, “Separatorenfleisch. Möglichkeiten und Grenzen des Nachweises unterschiedlicher Qualitäten,” presented at the 36. LAFF-Tagung, Lemgo, 2013.","ama":"Upmann M. Separatorenfleisch. Möglichkeiten und Grenzen des Nachweises unterschiedlicher Qualitäten. In: ; 2013.","apa":"Upmann, M. (2013). Separatorenfleisch. Möglichkeiten und Grenzen des Nachweises unterschiedlicher Qualitäten. 36. LAFF-Tagung, Lemgo.","chicago":"Upmann, Matthias. “Separatorenfleisch. Möglichkeiten und Grenzen des Nachweises unterschiedlicher Qualitäten,” 2013.","van":"Upmann M. Separatorenfleisch. Möglichkeiten und Grenzen des Nachweises unterschiedlicher Qualitäten. In 2013.","havard":"M. Upmann, Separatorenfleisch. Möglichkeiten und Grenzen des Nachweises unterschiedlicher Qualitäten, in: 2013.","mla":"Upmann, Matthias. Separatorenfleisch. Möglichkeiten und Grenzen des Nachweises unterschiedlicher Qualitäten. 2013.","bjps":"Upmann M (2013) Separatorenfleisch. Möglichkeiten und Grenzen des Nachweises unterschiedlicher Qualitäten.","ufg":"Upmann, Matthias: Separatorenfleisch. Möglichkeiten und Grenzen des Nachweises unterschiedlicher Qualitäten, in: o. Hg.: o. O. 2013.","short":"M. Upmann, in: 2013.","chicago-de":"Upmann, Matthias. 2013. Separatorenfleisch. Möglichkeiten und Grenzen des Nachweises unterschiedlicher Qualitäten. In: .","din1505-2-1":"Upmann, Matthias: Separatorenfleisch. Möglichkeiten und Grenzen des Nachweises unterschiedlicher Qualitäten. In: , 2013"},"publication_status":"published","author":[{"full_name":"Upmann, Matthias","first_name":"Matthias","last_name":"Upmann","id":"12666"}],"year":"2013","department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"conference":{"end_date":"2013-11-04","start_date":"2013-11-04","location":"Lemgo","name":"36. LAFF-Tagung"},"status":"public","date_created":"2020-05-25T13:25:40Z","type":"conference","user_id":"83778","date_updated":"2024-05-17T12:33:14Z","language":[{"iso":"ger"}],"_id":"2588"},{"article_number":"677 - 682","_id":"4003","place":"Amsterdam","type":"journal_article","intvolume":" 46","user_id":"74004","abstract":[{"lang":"eng","text":"Hybrid electric powertrains are developed for reducing the fuel consumption and the emission of carbon dioxide. In order to support this aim, the applied control strategy can be improved by testing and developing the electronic control units by means of Hardware-in-the-Loop simulation. For the simulation, a corresponding real-time model of the powertrain is required. The development of the model is a time-consuming task due to the high dynamics and switching frequencies in the electrical subsystem, comprising the electric drives, inverter and battery and due to the various configurations of the mechanical subsystem, comprising the transmissions. In this contribution, a method for an efficient modeling of different transmission configurations for power-split systems and different types of inverter is presented. Besides the required real-time capability, the models consider the correct power flows and power losses. The presented approach is proven by means of simulation results."}],"issue":"21","conference":{"name":"7th IFAC Symposium on Advances in Automotive Control","location":"Tokyo"},"department":[{"_id":"DEP6020"}],"publisher":"Elsevier Science","publication_status":"published","language":[{"iso":"eng"}],"date_created":"2020-11-23T12:26:10Z","publication":"IFAC Proceedings Volumes","publication_identifier":{"issn":["2405-8963"]},"date_updated":"2023-03-15T13:49:49Z","year":2013,"author":[{"id":"43696","first_name":"Stefan","last_name":"Geng","full_name":"Geng, Stefan"},{"first_name":"Thomas","full_name":"Schulte, Thomas","last_name":"Schulte","id":"46242"}],"status":"public","title":"Real-Time Models of Hybrid Electric Vehicle Powertrains","citation":{"ama":"Geng S, Schulte T. Real-Time Models of Hybrid Electric Vehicle Powertrains. IFAC Proceedings Volumes. 2013;46(21).","ieee":"S. Geng and T. Schulte, “Real-Time Models of Hybrid Electric Vehicle Powertrains,” IFAC Proceedings Volumes, vol. 46, no. 21, 2013.","din1505-2-1":"Geng, Stefan ; Schulte, Thomas: Real-Time Models of Hybrid Electric Vehicle Powertrains. In: IFAC Proceedings Volumes Bd. 46. Amsterdam, Elsevier Science (2013), Nr. 21","chicago-de":"Geng, Stefan und Thomas Schulte. 2013. Real-Time Models of Hybrid Electric Vehicle Powertrains. IFAC Proceedings Volumes 46, Nr. 21.","short":"S. Geng, T. Schulte, IFAC Proceedings Volumes 46 (2013).","ufg":"Geng, Stefan/Schulte, Thomas (2013): Real-Time Models of Hybrid Electric Vehicle Powertrains, in: IFAC Proceedings Volumes 46 (21).","bjps":"Geng S and Schulte T (2013) Real-Time Models of Hybrid Electric Vehicle Powertrains. IFAC Proceedings Volumes 46.","mla":"Geng, Stefan, and Thomas Schulte. “Real-Time Models of Hybrid Electric Vehicle Powertrains.” IFAC Proceedings Volumes, vol. 46, no. 21, 677–682, Elsevier Science, 2013.","havard":"S. Geng, T. Schulte, Real-Time Models of Hybrid Electric Vehicle Powertrains, IFAC Proceedings Volumes. 46 (2013).","van":"Geng S, Schulte T. Real-Time Models of Hybrid Electric Vehicle Powertrains. IFAC Proceedings Volumes. 2013;46(21).","chicago":"Geng, Stefan, and Thomas Schulte. “Real-Time Models of Hybrid Electric Vehicle Powertrains.” IFAC Proceedings Volumes 46, no. 21 (2013).","apa":"Geng, S., & Schulte, T. (2013). Real-Time Models of Hybrid Electric Vehicle Powertrains. IFAC Proceedings Volumes, 46(21)."},"volume":46},{"citation":{"ufg":"Kiffe, Axel et. al. (2013): Advanced Preprocessing and Correction-Methods for automated Generation of FPGA-based Simulation of Power Electronics, in: , New York, S. 1–10.","mla":"Kiffe, Axel, et al. Advanced Preprocessing and Correction-Methods for Automated Generation of FPGA-Based Simulation of Power Electronics. IEEE, 2013, pp. 1–10.","havard":"A. Kiffe, W. Riediger, T. Schulte, Advanced Preprocessing and Correction-Methods for automated Generation of FPGA-based Simulation of Power Electronics, in: IEEE, New York, 2013: pp. 1–10.","bjps":"Kiffe A, Riediger W and Schulte T (2013) Advanced Preprocessing and Correction-Methods for Automated Generation of FPGA-Based Simulation of Power Electronics. New York: IEEE, pp. 1–10.","van":"Kiffe A, Riediger W, Schulte T. Advanced Preprocessing and Correction-Methods for automated Generation of FPGA-based Simulation of Power Electronics. In New York: IEEE; 2013. p. 1–10.","chicago":"Kiffe, Axel, W. Riediger, and Thomas Schulte. “Advanced Preprocessing and Correction-Methods for Automated Generation of FPGA-Based Simulation of Power Electronics,” 1–10. New York: IEEE, 2013.","apa":"Kiffe, A., Riediger, W., & Schulte, T. (2013). Advanced Preprocessing and Correction-Methods for automated Generation of FPGA-based Simulation of Power Electronics (pp. 1–10). Presented at the 15th European Conference on Power Electronics and Applications (EPE), New York: IEEE.","din1505-2-1":"Kiffe, Axel ; Riediger, W. ; Schulte, Thomas: Advanced Preprocessing and Correction-Methods for automated Generation of FPGA-based Simulation of Power Electronics. In: . New York : IEEE, 2013, S. 1–10","chicago-de":"Kiffe, Axel, W. Riediger und Thomas Schulte. 2013. Advanced Preprocessing and Correction-Methods for automated Generation of FPGA-based Simulation of Power Electronics. In: , 1–10. New York: IEEE.","short":"A. Kiffe, W. Riediger, T. Schulte, in: IEEE, New York, 2013, pp. 1–10.","ama":"Kiffe A, Riediger W, Schulte T. Advanced Preprocessing and Correction-Methods for automated Generation of FPGA-based Simulation of Power Electronics. In: New York: IEEE; 2013:1-10.","ieee":"A. Kiffe, W. Riediger, and T. Schulte, “Advanced Preprocessing and Correction-Methods for automated Generation of FPGA-based Simulation of Power Electronics,” presented at the 15th European Conference on Power Electronics and Applications (EPE), Lile, France, 2013, pp. 1–10."},"publication_status":"published","title":"Advanced Preprocessing and Correction-Methods for automated Generation of FPGA-based Simulation of Power Electronics","publisher":"IEEE","status":"public","page":"1 - 10","abstract":[{"lang":"eng","text":"Power electronic devices are important in almost all industrial sectors. Power converters are used for electric drive systems in the production of an automation industry, in the automotive industry, as power supplies in telecommunications or for power conversion in power supply systems. For testing such electronic equipment, hardware-in-the-loop simulation is almost a standard method today, especially in the automotive industry, which always requires a real-time simulation of the plant. For testing the electronic control units of power electronics, real-time capable models of power electronic circuits need to be developed, accordingly. In the previously published contribution [10] different modeling methods were described and an algorithm was developed, which can be used to simulate power electronic circuits in real-time. Based on this algorithm and the automated generation of such models ([10]), further improvements for reducing the memory usage, increasing the degree of parallelization and improving accuracy are described in this paper. However, the presented approaches and modifications as well as the studies on correction methods for switching events and the preprocessing can be applied to other algorithms."}],"year":2013,"author":[{"id":"59764","last_name":"Kiffe","full_name":"Kiffe, Axel","first_name":"Axel"},{"first_name":"W.","last_name":"Riediger","full_name":"Riediger, W."},{"id":"46242","first_name":"Thomas","full_name":"Schulte, Thomas","last_name":"Schulte"}],"conference":{"end_date":"2013-09-06","start_date":"2013-09-02","location":"Lile, France","name":"15th European Conference on Power Electronics and Applications (EPE)"},"department":[{"_id":"DEP6020"}],"user_id":"74004","date_updated":"2023-03-15T13:49:49Z","publication_identifier":{"eisbn":["978-1-4799-0116-6"]},"type":"conference","date_created":"2020-11-23T12:37:47Z","_id":"4004","place":"New York","language":[{"iso":"eng"}]},{"corporate_editor":["PCIM GmbH"],"date_updated":"2023-03-15T13:49:49Z","publication":"International Exhibition & Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (PCIM Europe 2013) ","publication_identifier":{"isbn":["978-1-62993-308-5 "]},"date_created":"2020-11-23T12:50:06Z","language":[{"iso":"eng"}],"volume":1,"citation":{"ieee":"A. Kiffe, M. Brose, and T. Schulte, “Novel Approach for Real-time Simulation of Power Electronic Circuits Comprising Fast FPGA-based Output Models,” in International Exhibition & Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (PCIM Europe 2013) , vol. 1, PCIM GmbH, Ed. Red Hook: Curran Associates, Inc., 2013, pp. 1688–1695.","ama":"Kiffe A, Brose M, Schulte T. Novel Approach for Real-time Simulation of Power Electronic Circuits Comprising Fast FPGA-based Output Models. In: PCIM GmbH, ed. International Exhibition & Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (PCIM Europe 2013) . Vol 1. Red Hook: Curran Associates, Inc.; 2013:1688-1695.","chicago":"Kiffe, Axel, M. Brose, and Thomas Schulte. “Novel Approach for Real-Time Simulation of Power Electronic Circuits Comprising Fast FPGA-Based Output Models.” In International Exhibition & Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (PCIM Europe 2013) , edited by PCIM GmbH, 1:1688–95. Red Hook: Curran Associates, Inc., 2013.","apa":"Kiffe, A., Brose, M., & Schulte, T. (2013). Novel Approach for Real-time Simulation of Power Electronic Circuits Comprising Fast FPGA-based Output Models. In PCIM GmbH (Ed.), International Exhibition & Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (PCIM Europe 2013) (Vol. 1, pp. 1688–1695). Red Hook: Curran Associates, Inc.","bjps":"Kiffe A, Brose M and Schulte T (2013) Novel Approach for Real-Time Simulation of Power Electronic Circuits Comprising Fast FPGA-Based Output Models. In PCIM GmbH (ed.), International Exhibition & Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (PCIM Europe 2013) , vol. 1. Red Hook: Curran Associates, Inc., pp. 1688–1695.","havard":"A. Kiffe, M. Brose, T. Schulte, Novel Approach for Real-time Simulation of Power Electronic Circuits Comprising Fast FPGA-based Output Models, in: PCIM GmbH (Ed.), International Exhibition & Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (PCIM Europe 2013) , Curran Associates, Inc., Red Hook, 2013: pp. 1688–1695.","mla":"Kiffe, Axel, et al. “Novel Approach for Real-Time Simulation of Power Electronic Circuits Comprising Fast FPGA-Based Output Models.” International Exhibition & Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (PCIM Europe 2013) , edited by PCIM GmbH, vol. 1, Curran Associates, Inc., 2013, pp. 1688–95.","ufg":"Kiffe, Axel et. al. (2013): Novel Approach for Real-time Simulation of Power Electronic Circuits Comprising Fast FPGA-based Output Models, in: PCIM GmbH (Hg.): International Exhibition & Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (PCIM Europe 2013) (= 1), Red Hook, S. 1688–1695.","van":"Kiffe A, Brose M, Schulte T. Novel Approach for Real-time Simulation of Power Electronic Circuits Comprising Fast FPGA-based Output Models. In: PCIM GmbH, editor. International Exhibition & Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (PCIM Europe 2013) . Red Hook: Curran Associates, Inc.; 2013. p. 1688–95.","chicago-de":"Kiffe, Axel, M. Brose und Thomas Schulte. 2013. Novel Approach for Real-time Simulation of Power Electronic Circuits Comprising Fast FPGA-based Output Models. In: International Exhibition & Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (PCIM Europe 2013) , hg. von PCIM GmbH, 1:1688–1695. Red Hook: Curran Associates, Inc.","din1505-2-1":"Kiffe, Axel ; Brose, M. ; Schulte, Thomas: Novel Approach for Real-time Simulation of Power Electronic Circuits Comprising Fast FPGA-based Output Models. In: PCIM GmbH (Hrsg.): International Exhibition & Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (PCIM Europe 2013) . Bd. 1. Red Hook : Curran Associates, Inc., 2013, S. 1688–1695","short":"A. Kiffe, M. Brose, T. Schulte, in: PCIM GmbH (Ed.), International Exhibition & Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (PCIM Europe 2013) , Curran Associates, Inc., Red Hook, 2013, pp. 1688–1695."},"title":"Novel Approach for Real-time Simulation of Power Electronic Circuits Comprising Fast FPGA-based Output Models","status":"public","page":"1688 - 1695","year":2013,"author":[{"id":"59764","first_name":"Axel","full_name":"Kiffe, Axel","last_name":"Kiffe"},{"full_name":"Brose, M.","first_name":"M.","last_name":"Brose"},{"first_name":"Thomas","last_name":"Schulte","id":"46242","full_name":"Schulte, Thomas"}],"intvolume":" 1","user_id":"74004","type":"book_chapter","_id":"4005","place":"Red Hook","publication_status":"published","publisher":"Curran Associates, Inc.","abstract":[{"text":"Hardware-in-the-loop simulation of power electronic devices is growing in importance in diverse fields. For testing the electronic control units in automotive applications hardware-in-the-loop simulation is a today's standard method. It is also applied for many industrial applications like power converters and electric drives. Anyway real-time capable models of power electronics are required. In this contribution a novel approach is presented, which applies simplified and FPGA-based output models for significantly improving the feedback dynamics of a hardware-in-the-loop simulation of power electronic devices.","lang":"eng"}],"conference":{"name":"PCIM Europe 2013","location":"Nuremburg, Germany ","start_date":"2013-05-14","end_date":"2013-05-16"},"department":[{"_id":"DEP6020"}]},{"_id":"4197","place":"München","has_accepted_license":"1","intvolume":" 10","user_id":"74004","type":"conference","publisher":"Dt. Industrieverl.","department":[{"_id":"DEP6020"}],"ddc":["620"],"publication_status":"published","file":[{"relation":"main_file","creator":"czr-e2t","date_updated":"2020-12-08T10:24:33Z","content_type":"application/pdf","file_name":"borcherding.pdf","date_created":"2020-12-08T10:24:33Z","file_id":"4198","file_size":287919,"access_level":"local"}],"language":[{"iso":"ger"}],"file_date_updated":"2020-12-08T10:24:33Z","date_updated":"2023-03-15T13:49:51Z","date_created":"2020-12-08T10:22:13Z","publication_identifier":{"isbn":["978-383-56336-4-3"]},"publication":"Konferenz für Angewandte Automatisierungstechnik in Lehre und Entwicklung (AALE)","page":"257 - 266","status":"public","year":2013,"author":[{"last_name":"Borcherding","full_name":"Borcherding, Holger","id":"1693","first_name":"Holger"},{"full_name":"Austermann, Johann","last_name":"Austermann","id":"42114","first_name":"Johann"},{"last_name":"Böker","first_name":"J.","full_name":"Böker, J."}],"citation":{"ama":"Borcherding H, Austermann J, Böker J. Energierückspeisung bei Frequenzumrichtern mittels neuartiger Leistungselektronik. In: Konferenz für Angewandte Automatisierungstechnik in Lehre und Entwicklung (AALE). Vol 10. München: Dt. Industrieverl.; 2013:257-266.","ieee":"H. Borcherding, J. Austermann, and J. Böker, “Energierückspeisung bei Frequenzumrichtern mittels neuartiger Leistungselektronik,” in Konferenz für Angewandte Automatisierungstechnik in Lehre und Entwicklung (AALE), 2013, vol. 10, pp. 257–266.","ufg":"Borcherding, Holger et. al. (2013): Energierückspeisung bei Frequenzumrichtern mittels neuartiger Leistungselektronik, in: Konferenz für Angewandte Automatisierungstechnik in Lehre und Entwicklung (AALE) (= 10), München, S. 257–266.","havard":"H. Borcherding, J. Austermann, J. Böker, Energierückspeisung bei Frequenzumrichtern mittels neuartiger Leistungselektronik, in: Konferenz für Angewandte Automatisierungstechnik in Lehre und Entwicklung (AALE), Dt. Industrieverl., München, 2013: pp. 257–266.","bjps":"Borcherding H, Austermann J and Böker J (2013) Energierückspeisung bei Frequenzumrichtern mittels neuartiger Leistungselektronik. Konferenz für Angewandte Automatisierungstechnik in Lehre und Entwicklung (AALE), vol. 10. München: Dt. Industrieverl., pp. 257–266.","mla":"Borcherding, Holger, et al. “Energierückspeisung bei Frequenzumrichtern mittels neuartiger Leistungselektronik.” Konferenz für Angewandte Automatisierungstechnik in Lehre und Entwicklung (AALE), vol. 10, Dt. Industrieverl., 2013, pp. 257–66.","van":"Borcherding H, Austermann J, Böker J. Energierückspeisung bei Frequenzumrichtern mittels neuartiger Leistungselektronik. In: Konferenz für Angewandte Automatisierungstechnik in Lehre und Entwicklung (AALE). München: Dt. Industrieverl.; 2013. p. 257–66.","chicago":"Borcherding, Holger, Johann Austermann, and J. Böker. “Energierückspeisung bei Frequenzumrichtern mittels neuartiger Leistungselektronik.” In Konferenz für Angewandte Automatisierungstechnik in Lehre und Entwicklung (AALE), 10:257–66. München: Dt. Industrieverl., 2013.","apa":"Borcherding, H., Austermann, J., & Böker, J. (2013). Energierückspeisung bei Frequenzumrichtern mittels neuartiger Leistungselektronik. In Konferenz für Angewandte Automatisierungstechnik in Lehre und Entwicklung (AALE) (Vol. 10, pp. 257–266). München: Dt. Industrieverl.","chicago-de":"Borcherding, Holger, Johann Austermann und J. Böker. 2013. Energierückspeisung bei Frequenzumrichtern mittels neuartiger Leistungselektronik. In: Konferenz für Angewandte Automatisierungstechnik in Lehre und Entwicklung (AALE), 10:257–266. München: Dt. Industrieverl.","din1505-2-1":"Borcherding, Holger ; Austermann, Johann ; Böker, J.: Energierückspeisung bei Frequenzumrichtern mittels neuartiger Leistungselektronik. In: Konferenz für Angewandte Automatisierungstechnik in Lehre und Entwicklung (AALE). Bd. 10. München : Dt. Industrieverl., 2013, S. 257–266","short":"H. Borcherding, J. Austermann, J. Böker, in: Konferenz für Angewandte Automatisierungstechnik in Lehre und Entwicklung (AALE), Dt. Industrieverl., München, 2013, pp. 257–266."},"volume":10,"title":"Energierückspeisung bei Frequenzumrichtern mittels neuartiger Leistungselektronik"},{"citation":{"short":"O. Niggemann, H. Borcherding, M. Köster, S. Windmann, M. Ehlich, Werkstattstechnik : wt (2013) 416–422.","chicago-de":"Niggemann, Oliver, Holger Borcherding, Markus Köster, Stefan Windmann und Martin Ehlich. 2013. Energieeffizienz in der Intralogistik : Elektrische Antriebstechnik - intelligent und nachhaltig. Werkstattstechnik : wt, Nr. 5: 416–422.","din1505-2-1":"Niggemann, Oliver ; Borcherding, Holger ; Köster, Markus ; Windmann, Stefan ; Ehlich, Martin: Energieeffizienz in der Intralogistik : Elektrische Antriebstechnik - intelligent und nachhaltig. In: Werkstattstechnik : wt. Berlin, Springer (2013), Nr. 5, S. 416–422","van":"Niggemann O, Borcherding H, Köster M, Windmann S, Ehlich M. Energieeffizienz in der Intralogistik : Elektrische Antriebstechnik - intelligent und nachhaltig. Werkstattstechnik : wt. 2013;(5):416–22.","ama":"Niggemann O, Borcherding H, Köster M, Windmann S, Ehlich M. Energieeffizienz in der Intralogistik : Elektrische Antriebstechnik - intelligent und nachhaltig. Werkstattstechnik : wt. 2013;(5):416-422.","ufg":"Niggemann, Oliver et. al. (2013): Energieeffizienz in der Intralogistik : Elektrische Antriebstechnik - intelligent und nachhaltig, in: Werkstattstechnik : wt (5), S. 416–422.","bjps":"Niggemann O et al. (2013) Energieeffizienz in der Intralogistik : Elektrische Antriebstechnik - intelligent und nachhaltig. Werkstattstechnik : wt 416–422.","havard":"O. Niggemann, H. Borcherding, M. Köster, S. Windmann, M. Ehlich, Energieeffizienz in der Intralogistik : Elektrische Antriebstechnik - intelligent und nachhaltig, Werkstattstechnik : wt. (2013) 416–422.","mla":"Niggemann, Oliver, et al. “Energieeffizienz in der Intralogistik : Elektrische Antriebstechnik - intelligent und nachhaltig.” Werkstattstechnik : wt, no. 5, Springer, 2013, pp. 416–22.","apa":"Niggemann, O., Borcherding, H., Köster, M., Windmann, S., & Ehlich, M. (2013). Energieeffizienz in der Intralogistik : Elektrische Antriebstechnik - intelligent und nachhaltig. Werkstattstechnik : wt, (5), 416–422.","ieee":"O. Niggemann, H. Borcherding, M. Köster, S. Windmann, and M. Ehlich, “Energieeffizienz in der Intralogistik : Elektrische Antriebstechnik - intelligent und nachhaltig,” Werkstattstechnik : wt, no. 5, pp. 416–422, 2013.","chicago":"Niggemann, Oliver, Holger Borcherding, Markus Köster, Stefan Windmann, and Martin Ehlich. “Energieeffizienz in der Intralogistik : Elektrische Antriebstechnik - intelligent und nachhaltig.” Werkstattstechnik : wt, no. 5 (2013): 416–22."},"title":"Energieeffizienz in der Intralogistik : Elektrische Antriebstechnik - intelligent und nachhaltig","page":"416 - 422","status":"public","author":[{"id":"10876","full_name":"Niggemann, Oliver","first_name":"Oliver","last_name":"Niggemann"},{"full_name":"Borcherding, Holger","first_name":"Holger","id":"1693","last_name":"Borcherding"},{"first_name":"Markus","full_name":"Köster, Markus","last_name":"Köster"},{"id":"58525","last_name":"Windmann","full_name":"Windmann, Stefan","first_name":"Stefan"},{"last_name":"Ehlich","first_name":"Martin","full_name":"Ehlich, Martin"}],"year":2013,"file_date_updated":"2020-12-08T10:27:46Z","date_updated":"2023-03-15T13:49:51Z","date_created":"2020-12-08T10:25:59Z","publication_identifier":{"issn":["1436-4980"]},"publication":"Werkstattstechnik : wt","language":[{"iso":"ger"}],"file":[{"file_id":"4200","file_size":3009760,"date_created":"2020-12-08T10:27:46Z","content_type":"application/pdf","file_name":"document.pdf","creator":"czr-e2t","relation":"main_file","date_updated":"2020-12-08T10:27:46Z","access_level":"local"}],"publication_status":"published","publisher":"Springer","issue":"5","department":[{"_id":"DEP6020"}],"ddc":["004"],"user_id":"74004","type":"journal_article","_id":"4199","place":"Berlin","has_accepted_license":"1"},{"date_updated":"2023-03-15T13:49:51Z","editor":[{"last_name":"Sendler","full_name":"Sendler, Ulrich","first_name":"Ulrich"}],"file_date_updated":"2020-12-08T10:34:10Z","publication":"Industrie 4.0 : Beherrschung der industriellen Komplexität mit SysLM","publication_identifier":{"isbn":["978-3-642-36916-2"]},"date_created":"2020-12-08T10:31:10Z","language":[{"iso":"ger"}],"citation":{"mla":"Borcherding, Holger. “Der mittelständische Maschinenbau - flexibel und höchst innovativ auch in der Systementwicklung.” Industrie 4.0 : Beherrschung der industriellen Komplexität mit SysLM, edited by Ulrich Sendler, Springer, 2013, pp. 55–72.","havard":"H. Borcherding, Der mittelständische Maschinenbau - flexibel und höchst innovativ auch in der Systementwicklung, in: U. Sendler (Ed.), Industrie 4.0 : Beherrschung der industriellen Komplexität mit SysLM, Springer, Berlin, 2013: pp. 55–72.","bjps":"Borcherding H (2013) Der mittelständische Maschinenbau - flexibel und höchst innovativ auch in der Systementwicklung. In Sendler U (ed.), Industrie 4.0 : Beherrschung der industriellen Komplexität mit SysLM. Berlin: Springer, pp. 55–72.","ufg":"Borcherding, Holger (2013): Der mittelständische Maschinenbau - flexibel und höchst innovativ auch in der Systementwicklung, in: Ulrich Sendler (Hg.): Industrie 4.0 : Beherrschung der industriellen Komplexität mit SysLM, Berlin, S. 55–72.","ama":"Borcherding H. Der mittelständische Maschinenbau - flexibel und höchst innovativ auch in der Systementwicklung. In: Sendler U, ed. Industrie 4.0 : Beherrschung der industriellen Komplexität mit SysLM. Berlin: Springer; 2013:55-72.","van":"Borcherding H. Der mittelständische Maschinenbau - flexibel und höchst innovativ auch in der Systementwicklung. In: Sendler U, editor. Industrie 40 : Beherrschung der industriellen Komplexität mit SysLM. Berlin: Springer; 2013. p. 55–72.","chicago":"Borcherding, Holger. “Der mittelständische Maschinenbau - flexibel und höchst innovativ auch in der Systementwicklung.” In Industrie 4.0 : Beherrschung der industriellen Komplexität mit SysLM, edited by Ulrich Sendler, 55–72. Berlin: Springer, 2013.","ieee":"H. Borcherding, “Der mittelständische Maschinenbau - flexibel und höchst innovativ auch in der Systementwicklung,” in Industrie 4.0 : Beherrschung der industriellen Komplexität mit SysLM, U. Sendler, Ed. Berlin: Springer, 2013, pp. 55–72.","apa":"Borcherding, H. (2013). Der mittelständische Maschinenbau - flexibel und höchst innovativ auch in der Systementwicklung. In U. Sendler (Ed.), Industrie 4.0 : Beherrschung der industriellen Komplexität mit SysLM (pp. 55–72). Berlin: Springer.","din1505-2-1":"Borcherding, Holger: Der mittelständische Maschinenbau - flexibel und höchst innovativ auch in der Systementwicklung. In: Sendler, U. (Hrsg.): Industrie 4.0 : Beherrschung der industriellen Komplexität mit SysLM. Berlin : Springer, 2013, S. 55–72","chicago-de":"Borcherding, Holger. 2013. Der mittelständische Maschinenbau - flexibel und höchst innovativ auch in der Systementwicklung. In: Industrie 4.0 : Beherrschung der industriellen Komplexität mit SysLM, hg. von Ulrich Sendler, 55–72. Berlin: Springer.","short":"H. Borcherding, in: U. Sendler (Ed.), Industrie 4.0 : Beherrschung der industriellen Komplexität mit SysLM, Springer, Berlin, 2013, pp. 55–72."},"title":"Der mittelständische Maschinenbau - flexibel und höchst innovativ auch in der Systementwicklung","status":"public","page":"55 - 72","year":2013,"author":[{"first_name":"Holger","full_name":"Borcherding, Holger","id":"1693","last_name":"Borcherding"}],"user_id":"74004","type":"book_chapter","place":"Berlin","_id":"4201","has_accepted_license":"1","file":[{"date_updated":"2020-12-08T10:34:10Z","relation":"main_file","creator":"czr-e2t","file_size":2336775,"file_id":"4202","date_created":"2020-12-08T10:34:10Z","content_type":"application/pdf","file_name":"chp_10.1007_978_3_642_36917_9_4.pdf","access_level":"local"}],"publication_status":"published","publisher":"Springer","ddc":["004"],"department":[{"_id":"DEP6020"}]},{"page":"91 - 102","status":"public","conference":{"name":"3rd international conference of Production engineering and management proceedings","location":"Trieste, Italy","start_date":"2013-09-26","end_date":"2013-09-27"},"department":[{"_id":"DEP6020"}],"ddc":["330"],"author":[{"last_name":"Bursch","full_name":"Bursch, Dennis","first_name":"Dennis"},{"last_name":"Riegel","first_name":"Adrian","full_name":"Riegel, Adrian","id":"14647"},{"full_name":"Borcherding, Holger","id":"1693","first_name":"Holger","last_name":"Borcherding"},{"full_name":"Akemeier, Volker","id":"52377","first_name":"Volker","last_name":"Akemeier"}],"year":2013,"file":[{"access_level":"local","file_id":"4204","file_size":4728605,"file_name":"91.pdf","date_created":"2020-12-08T10:39:01Z","content_type":"application/pdf","creator":"czr-e2t","relation":"main_file","date_updated":"2020-12-08T10:39:01Z"}],"publication_status":"published","citation":{"short":"D. Bursch, A. Riegel, H. Borcherding, V. Akemeier, in: E. Padoano, F.-J. Villmer (Eds.), Production Engineering and Management Proceedings 3rd International Conference 26th and 27th September 2013 Trieste, Italy, 2013, pp. 91–102.","din1505-2-1":"Bursch, Dennis ; Riegel, Adrian ; Borcherding, Holger ; Akemeier, Volker: INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY. In: Padoano, E. ; Villmer, F.-J. (Hrsg.): Production engineering and management proceedings 3rd international conference 26th and 27th September 2013 Trieste, Italy, 2013, S. 91–102","chicago-de":"Bursch, Dennis, Adrian Riegel, Holger Borcherding und Volker Akemeier. 2013. INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY. In: Production engineering and management proceedings 3rd international conference 26th and 27th September 2013 Trieste, Italy, hg. von Elio Padoano und Franz-Josef Villmer, 91–102.","van":"Bursch D, Riegel A, Borcherding H, Akemeier V. INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY. In: Padoano E, Villmer F-J, editors. Production engineering and management proceedings 3rd international conference 26th and 27th September 2013 Trieste, Italy. 2013. p. 91–102.","ufg":"Bursch, Dennis et. al. (2013): INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY, in: Elio Padoano/Franz-Josef Villmer (Hgg.): Production engineering and management proceedings 3rd international conference 26th and 27th September 2013 Trieste, Italy, S. 91–102.","havard":"D. Bursch, A. Riegel, H. Borcherding, V. Akemeier, INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY, in: E. Padoano, F.-J. Villmer (Eds.), Production Engineering and Management Proceedings 3rd International Conference 26th and 27th September 2013 Trieste, Italy, 2013: pp. 91–102.","bjps":"Bursch D et al. (2013) INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY. In Padoano E and Villmer F-J (eds), Production Engineering and Management Proceedings 3rd International Conference 26th and 27th September 2013 Trieste, Italy. pp. 91–102.","mla":"Bursch, Dennis, et al. “INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY.” Production Engineering and Management Proceedings 3rd International Conference 26th and 27th September 2013 Trieste, Italy, edited by Elio Padoano and Franz-Josef Villmer, 2013, pp. 91–102.","apa":"Bursch, D., Riegel, A., Borcherding, H., & Akemeier, V. (2013). INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY. In E. Padoano & F.-J. Villmer (Eds.), Production engineering and management proceedings 3rd international conference 26th and 27th September 2013 Trieste, Italy (pp. 91–102). Trieste, Italy.","chicago":"Bursch, Dennis, Adrian Riegel, Holger Borcherding, and Volker Akemeier. “INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY.” In Production Engineering and Management Proceedings 3rd International Conference 26th and 27th September 2013 Trieste, Italy, edited by Elio Padoano and Franz-Josef Villmer, 91–102, 2013.","ama":"Bursch D, Riegel A, Borcherding H, Akemeier V. INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY. In: Padoano E, Villmer F-J, eds. Production Engineering and Management Proceedings 3rd International Conference 26th and 27th September 2013 Trieste, Italy. ; 2013:91-102.","ieee":"D. Bursch, A. Riegel, H. Borcherding, and V. Akemeier, “INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY,” in Production engineering and management proceedings 3rd international conference 26th and 27th September 2013 Trieste, Italy, Trieste, Italy, 2013, pp. 91–102."},"title":"INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY","_id":"4203","language":[{"iso":"eng"}],"has_accepted_license":"1","editor":[{"full_name":"Padoano, Elio","first_name":"Elio","last_name":"Padoano"},{"first_name":"Franz-Josef","last_name":"Villmer","full_name":"Villmer, Franz-Josef"}],"file_date_updated":"2020-12-08T10:39:01Z","date_updated":"2023-03-15T13:49:51Z","user_id":"74004","date_created":"2020-12-08T10:35:51Z","type":"conference","publication":"Production engineering and management proceedings 3rd international conference 26th and 27th September 2013 Trieste, Italy","publication_identifier":{"isbn":["978-3-941645-09-7"]}},{"_id":"4205","place":"Red Hook","language":[{"iso":"eng"}],"has_accepted_license":"1","file_date_updated":"2020-12-08T10:45:31Z","user_id":"74004","date_updated":"2023-03-15T13:49:51Z","publication":"PCIM Europe, International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2013","publication_identifier":{"isbn":["978-1-62993-308-5"]},"type":"conference","date_created":"2020-12-08T10:41:59Z","publisher":"Curran","status":"public","page":"1358 - 1365","year":2013,"author":[{"first_name":"Johann","id":"42114","full_name":"Austermann, Johann","last_name":"Austermann"},{"full_name":"Borcherding, Holger","id":"1693","first_name":"Holger","last_name":"Borcherding"},{"full_name":"Böcker, Joachim","first_name":"Joachim","last_name":"Böcker"}],"ddc":["530"],"department":[{"_id":"DEP6020"}],"citation":{"short":"J. Austermann, H. Borcherding, J. Böcker, in: PCIM Europe, International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2013, Curran, Red Hook, 2013, pp. 1358–1365.","chicago-de":"Austermann, Johann, Holger Borcherding und Joachim Böcker. 2013. Design and Practical Evaluation of a Power Regeneration System for Voltage Source Converters. In: PCIM Europe, International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2013, 1358–1365. Red Hook: Curran.","din1505-2-1":"Austermann, Johann ; Borcherding, Holger ; Böcker, Joachim: Design and Practical Evaluation of a Power Regeneration System for Voltage Source Converters. In: PCIM Europe, International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2013. Red Hook : Curran, 2013, S. 1358–1365","apa":"Austermann, J., Borcherding, H., & Böcker, J. (2013). Design and Practical Evaluation of a Power Regeneration System for Voltage Source Converters. In PCIM Europe, International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2013 (pp. 1358–1365). Red Hook: Curran.","chicago":"Austermann, Johann, Holger Borcherding, and Joachim Böcker. “Design and Practical Evaluation of a Power Regeneration System for Voltage Source Converters.” In PCIM Europe, International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2013, 1358–65. Red Hook: Curran, 2013.","van":"Austermann J, Borcherding H, Böcker J. Design and Practical Evaluation of a Power Regeneration System for Voltage Source Converters. In: PCIM Europe, International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2013. Red Hook: Curran; 2013. p. 1358–65.","ufg":"Austermann, Johann et. al. (2013): Design and Practical Evaluation of a Power Regeneration System for Voltage Source Converters, in: PCIM Europe, International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2013, Red Hook, S. 1358–1365.","havard":"J. Austermann, H. Borcherding, J. Böcker, Design and Practical Evaluation of a Power Regeneration System for Voltage Source Converters, in: PCIM Europe, International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2013, Curran, Red Hook, 2013: pp. 1358–1365.","bjps":"Austermann J, Borcherding H and Böcker J (2013) Design and Practical Evaluation of a Power Regeneration System for Voltage Source Converters. PCIM Europe, International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2013. Red Hook: Curran, pp. 1358–1365.","mla":"Austermann, Johann, et al. “Design and Practical Evaluation of a Power Regeneration System for Voltage Source Converters.” PCIM Europe, International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2013, Curran, 2013, pp. 1358–65.","ieee":"J. Austermann, H. Borcherding, and J. Böcker, “Design and Practical Evaluation of a Power Regeneration System for Voltage Source Converters,” in PCIM Europe, International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2013, 2013, pp. 1358–1365.","ama":"Austermann J, Borcherding H, Böcker J. Design and Practical Evaluation of a Power Regeneration System for Voltage Source Converters. In: PCIM Europe, International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2013. Red Hook: Curran; 2013:1358-1365."},"file":[{"date_updated":"2020-12-08T10:45:31Z","relation":"main_file","creator":"czr-e2t","file_size":762663,"file_id":"4206","file_name":"BA005.pdf","content_type":"application/pdf","date_created":"2020-12-08T10:45:31Z","access_level":"local"}],"publication_status":"published","title":"Design and Practical Evaluation of a Power Regeneration System for Voltage Source Converters"},{"date_updated":"2023-03-15T13:49:51Z","user_id":"74004","date_created":"2020-12-08T10:56:44Z","type":"report_science","report_number":"Förderkennzeichen: 17052X10","language":[{"iso":"ger"}],"place":"Düsseldorf","_id":"4207","alternative_title":["Abschlussbericht zum Projekt E-DEAL"],"publication_status":"published","citation":{"van":"Borcherding H, Austermann J, Studen C, Klöpper B, Siekmann L. Energieeffizienzsteigerung bei drehzahlgeregelten elektrischen Antrieben durch neuartige Leistungselektronik. Abschlussbericht zum Projekt E-DEAL. Düsseldorf: Bundesministeriums für Bildung und Forschung; 2013. 82 p.","ufg":"Borcherding, Holger et. al. (2013): Energieeffizienzsteigerung bei drehzahlgeregelten elektrischen Antrieben durch neuartige Leistungselektronik. Abschlussbericht zum Projekt E-DEAL, Düsseldorf.","havard":"H. Borcherding, J. Austermann, C. Studen, B. Klöpper, L. Siekmann, Energieeffizienzsteigerung bei drehzahlgeregelten elektrischen Antrieben durch neuartige Leistungselektronik. Abschlussbericht zum Projekt E-DEAL, Bundesministeriums für Bildung und Forschung, Düsseldorf, 2013.","bjps":"Borcherding H et al. (2013) Energieeffizienzsteigerung bei drehzahlgeregelten elektrischen Antrieben durch neuartige Leistungselektronik. Abschlussbericht zum Projekt E-DEAL. Düsseldorf: Bundesministeriums für Bildung und Forschung.","mla":"Borcherding, Holger, et al. Energieeffizienzsteigerung bei drehzahlgeregelten elektrischen Antrieben durch neuartige Leistungselektronik. Abschlussbericht zum Projekt E-DEAL. Bundesministeriums für Bildung und Forschung, 2013.","apa":"Borcherding, H., Austermann, J., Studen, C., Klöpper, B., & Siekmann, L. (2013). Energieeffizienzsteigerung bei drehzahlgeregelten elektrischen Antrieben durch neuartige Leistungselektronik. Abschlussbericht zum Projekt E-DEAL. Düsseldorf: Bundesministeriums für Bildung und Forschung.","chicago":"Borcherding, Holger, Johann Austermann, Christian Studen, Björn Klöpper, and Lennart Siekmann. Energieeffizienzsteigerung bei drehzahlgeregelten elektrischen Antrieben durch neuartige Leistungselektronik. Abschlussbericht zum Projekt E-DEAL. Düsseldorf: Bundesministeriums für Bildung und Forschung, 2013.","short":"H. Borcherding, J. Austermann, C. Studen, B. Klöpper, L. Siekmann, Energieeffizienzsteigerung bei drehzahlgeregelten elektrischen Antrieben durch neuartige Leistungselektronik. Abschlussbericht zum Projekt E-DEAL, Bundesministeriums für Bildung und Forschung, Düsseldorf, 2013.","din1505-2-1":"Borcherding, Holger ; Austermann, Johann ; Studen, Christian ; Klöpper, Björn ; Siekmann, Lennart: Energieeffizienzsteigerung bei drehzahlgeregelten elektrischen Antrieben durch neuartige Leistungselektronik. Abschlussbericht zum Projekt E-DEAL. Düsseldorf : Bundesministeriums für Bildung und Forschung, 2013","chicago-de":"Borcherding, Holger, Johann Austermann, Christian Studen, Björn Klöpper und Lennart Siekmann. 2013. Energieeffizienzsteigerung bei drehzahlgeregelten elektrischen Antrieben durch neuartige Leistungselektronik. Abschlussbericht zum Projekt E-DEAL. Düsseldorf: Bundesministeriums für Bildung und Forschung.","ama":"Borcherding H, Austermann J, Studen C, Klöpper B, Siekmann L. Energieeffizienzsteigerung bei drehzahlgeregelten elektrischen Antrieben durch neuartige Leistungselektronik. Abschlussbericht zum Projekt E-DEAL. Düsseldorf: Bundesministeriums für Bildung und Forschung; 2013.","ieee":"H. Borcherding, J. Austermann, C. Studen, B. Klöpper, and L. Siekmann, Energieeffizienzsteigerung bei drehzahlgeregelten elektrischen Antrieben durch neuartige Leistungselektronik. Abschlussbericht zum Projekt E-DEAL. Düsseldorf: Bundesministeriums für Bildung und Forschung, 2013."},"title":"Energieeffizienzsteigerung bei drehzahlgeregelten elektrischen Antrieben durch neuartige Leistungselektronik. Abschlussbericht zum Projekt E-DEAL","page":"82","status":"public","publisher":"Bundesministeriums für Bildung und Forschung","department":[{"_id":"DEP6020"}],"year":2013,"main_file_link":[{"url":"https://edocs.tib.eu/files/e01fb14/791534243.pdf"}],"author":[{"first_name":"Holger","id":"1693","last_name":"Borcherding","full_name":"Borcherding, Holger"},{"id":"42114","first_name":"Johann","last_name":"Austermann","full_name":"Austermann, Johann"},{"first_name":"Christian","last_name":"Studen","full_name":"Studen, Christian"},{"full_name":"Klöpper, Björn","id":"49234","last_name":"Klöpper","first_name":"Björn"},{"last_name":"Siekmann","first_name":"Lennart","full_name":"Siekmann, Lennart"}]},{"type":"patent","date_created":"2020-12-10T11:28:31Z","date_updated":"2023-03-15T13:49:51Z","user_id":"74004","ipc":"B60L7/14","alternative_title":["Internationale Patentanmeldung, Offenlegung"],"ipn":"WO2013020544A1","_id":"4239","title":"Verfahren und Schaltung für den mehrphasigen Betrieb eines Elektromotors","citation":{"ama":"Borcherding H. Verfahren und Schaltung für den mehrphasigen Betrieb eines Elektromotors. 2013.","van":"Borcherding H. Verfahren und Schaltung für den mehrphasigen Betrieb eines Elektromotors. 2013.","havard":"H. Borcherding, Verfahren und Schaltung für den mehrphasigen Betrieb eines Elektromotors, (2013).","mla":"Borcherding, Holger. Verfahren Und Schaltung Für Den Mehrphasigen Betrieb Eines Elektromotors. 2013.","bjps":"Borcherding H (2013) Verfahren Und Schaltung Für Den Mehrphasigen Betrieb Eines Elektromotors.","ufg":"Borcherding, Holger (2013): Verfahren und Schaltung für den mehrphasigen Betrieb eines Elektromotors.","ieee":"H. Borcherding, “Verfahren und Schaltung für den mehrphasigen Betrieb eines Elektromotors.” 2013.","apa":"Borcherding, H. (2013). Verfahren und Schaltung für den mehrphasigen Betrieb eines Elektromotors.","chicago":"Borcherding, Holger. “Verfahren Und Schaltung Für Den Mehrphasigen Betrieb Eines Elektromotors,” 2013.","short":"H. Borcherding, (2013).","chicago-de":"Borcherding, Holger. 2013. Verfahren und Schaltung für den mehrphasigen Betrieb eines Elektromotors.","din1505-2-1":"Borcherding, Holger: Verfahren und Schaltung für den mehrphasigen Betrieb eines Elektromotors (2013)"},"application_number":"DE102011109773.6","application_date":"2011-08-09","department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"author":[{"first_name":"Holger","full_name":"Borcherding, Holger","last_name":"Borcherding","id":"1693"}],"year":2013,"publication_date":"2013-02-14","status":"public"},{"_id":"4240","ipn":"WO002013020987A1","ipc":"H04L25/4902","alternative_title":["Internationale Patentanmeldung, Offenlegung"],"user_id":"74004","date_updated":"2023-03-15T13:49:51Z","date_created":"2020-12-10T11:35:07Z","type":"patent","status":"public","publication_date":"2013-02-14","year":2013,"author":[{"full_name":"Borcherding, Holger","last_name":"Borcherding","id":"1693","first_name":"Holger"}],"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"application_date":"2011-08-08","application_number":"DE102011080586A1","citation":{"ieee":"H. Borcherding, “Verfahren zum Erzeugen eines digitalen Signals.” 2013.","ama":"Borcherding H. Verfahren zum Erzeugen eines digitalen Signals. 2013.","short":"H. Borcherding, (2013).","din1505-2-1":"Borcherding, Holger: Verfahren zum Erzeugen eines digitalen Signals (2013)","chicago-de":"Borcherding, Holger. 2013. Verfahren zum Erzeugen eines digitalen Signals.","apa":"Borcherding, H. (2013). Verfahren zum Erzeugen eines digitalen Signals.","chicago":"Borcherding, Holger. “Verfahren Zum Erzeugen Eines Digitalen Signals,” 2013.","van":"Borcherding H. Verfahren zum Erzeugen eines digitalen Signals. 2013.","ufg":"Borcherding, Holger (2013): Verfahren zum Erzeugen eines digitalen Signals.","havard":"H. Borcherding, Verfahren zum Erzeugen eines digitalen Signals, (2013).","mla":"Borcherding, Holger. Verfahren Zum Erzeugen Eines Digitalen Signals. 2013.","bjps":"Borcherding H (2013) Verfahren Zum Erzeugen Eines Digitalen Signals."},"title":"Verfahren zum Erzeugen eines digitalen Signals"},{"publication_identifier":{"isbn":["978-3-642-36916-2 "]},"type":"book","date_created":"2020-12-14T10:24:59Z","user_id":"74004","date_updated":"2023-03-15T13:49:51Z","editor":[{"first_name":"Ulrich","last_name":"Sendler","full_name":"Sendler, Ulrich"}],"place":"Wiesbaden","language":[{"iso":"ger"}],"_id":"4275","title":"Industrie 4.0 : Beherrschung der industriellen Komplexität mit SysLM","citation":{"ieee":"G. Baum et al., Industrie 4.0 : Beherrschung der industriellen Komplexität mit SysLM. Wiesbaden: Springer Vieweg Verlag, 2013.","ama":"Baum G, Borcherding H, Broy M, et al. Industrie 4.0 : Beherrschung der industriellen Komplexität mit SysLM. (Sendler U, ed.). Wiesbaden: Springer Vieweg Verlag; 2013.","short":"G. Baum, H. Borcherding, M. Broy, A.S. Huber, M. Eigner, H. Kohler, S. Russwurm, Industrie 4.0 : Beherrschung der industriellen Komplexität mit SysLM, Springer Vieweg Verlag, Wiesbaden, 2013.","chicago-de":"Baum, Gerhard, Holger Borcherding, Manfred Broy, Anton S. Huber, Martin Eigner, Herbert Kohler und Siedfried Russwurm. 2013. Industrie 4.0 : Beherrschung der industriellen Komplexität mit SysLM. Hg. von Ulrich Sendler. Wiesbaden: Springer Vieweg Verlag.","din1505-2-1":"Baum, Gerhard ; Borcherding, Holger ; Broy, Manfred ; Huber, Anton S. ; Eigner, Martin ; Kohler, Herbert ; Russwurm, Siedfried ; Sendler, U. (Hrsg.): Industrie 4.0 : Beherrschung der industriellen Komplexität mit SysLM. Wiesbaden : Springer Vieweg Verlag, 2013","apa":"Baum, G., Borcherding, H., Broy, M., Huber, A. S., Eigner, M., Kohler, H., & Russwurm, S. (2013). Industrie 4.0 : Beherrschung der industriellen Komplexität mit SysLM. (U. Sendler, Ed.). Wiesbaden: Springer Vieweg Verlag.","chicago":"Baum, Gerhard, Holger Borcherding, Manfred Broy, Anton S. Huber, Martin Eigner, Herbert Kohler, and Siedfried Russwurm. Industrie 4.0 : Beherrschung der industriellen Komplexität mit SysLM. Edited by Ulrich Sendler. Wiesbaden: Springer Vieweg Verlag, 2013.","van":"Baum G, Borcherding H, Broy M, Huber AS, Eigner M, Kohler H, et al. Industrie 4.0 : Beherrschung der industriellen Komplexität mit SysLM. Sendler U, editor. Wiesbaden: Springer Vieweg Verlag; 2013.","mla":"Baum, Gerhard, et al. Industrie 4.0 : Beherrschung der industriellen Komplexität mit SysLM. Edited by Ulrich Sendler, Springer Vieweg Verlag, 2013.","havard":"G. Baum, H. Borcherding, M. Broy, A.S. Huber, M. Eigner, H. Kohler, S. Russwurm, Industrie 4.0 : Beherrschung der industriellen Komplexität mit SysLM, Springer Vieweg Verlag, Wiesbaden, 2013.","bjps":"Baum G et al. (2013) Industrie 4.0 : Beherrschung der industriellen Komplexität mit SysLM, Sendler U (ed.). Wiesbaden: Springer Vieweg Verlag.","ufg":"Baum, Gerhard et. al. (2013): Industrie 4.0 : Beherrschung der industriellen Komplexität mit SysLM, Wiesbaden."},"publication_status":"published","year":2013,"author":[{"last_name":"Baum","first_name":"Gerhard","full_name":"Baum, Gerhard"},{"first_name":"Holger","id":"1693","full_name":"Borcherding, Holger","last_name":"Borcherding"},{"first_name":"Manfred","full_name":"Broy, Manfred","last_name":"Broy"},{"first_name":"Anton S. ","full_name":"Huber, Anton S. ","last_name":"Huber"},{"last_name":"Eigner","first_name":"Martin","full_name":"Eigner, Martin"},{"first_name":"Herbert","last_name":"Kohler","full_name":"Kohler, Herbert"},{"full_name":"Russwurm, Siedfried","first_name":"Siedfried","last_name":"Russwurm"}],"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"status":"public","publisher":"Springer Vieweg Verlag"},{"date_created":"2020-12-14T10:38:54Z","type":"conference","publication_identifier":{"eisbn":["978-1-4799-0752-6"]},"publication":"11th International IEEE Conference on Industrial Informatics","date_updated":"2023-03-15T13:49:51Z","user_id":"74004","language":[{"iso":"eng"}],"place":"Bochum","_id":"4276","title":"A Stochastic Method for the Detection of Anomalous Energy Consumption in Hybrid Industrial Systems","publication_status":"published","citation":{"ieee":"S. Windmann, S. Jiao, O. Niggemann, and H. Borcherding, “A Stochastic Method for the Detection of Anomalous Energy Consumption in Hybrid Industrial Systems,” in 11th International IEEE Conference on Industrial Informatics, Bochum, 2013, pp. 194–199.","ama":"Windmann S, Jiao S, Niggemann O, Borcherding H. A Stochastic Method for the Detection of Anomalous Energy Consumption in Hybrid Industrial Systems. In: 11th International IEEE Conference on Industrial Informatics. Bochum: IEEE; 2013:194-199.","chicago-de":"Windmann, Stefan, Shuo Jiao, Oliver Niggemann und Holger Borcherding. 2013. A Stochastic Method for the Detection of Anomalous Energy Consumption in Hybrid Industrial Systems. In: 11th International IEEE Conference on Industrial Informatics, 194–199. Bochum: IEEE.","din1505-2-1":"Windmann, Stefan ; Jiao, Shuo ; Niggemann, Oliver ; Borcherding, Holger: A Stochastic Method for the Detection of Anomalous Energy Consumption in Hybrid Industrial Systems. In: 11th International IEEE Conference on Industrial Informatics. Bochum : IEEE, 2013, S. 194–199","short":"S. Windmann, S. Jiao, O. Niggemann, H. Borcherding, in: 11th International IEEE Conference on Industrial Informatics, IEEE, Bochum, 2013, pp. 194–199.","chicago":"Windmann, Stefan, Shuo Jiao, Oliver Niggemann, and Holger Borcherding. “A Stochastic Method for the Detection of Anomalous Energy Consumption in Hybrid Industrial Systems.” In 11th International IEEE Conference on Industrial Informatics, 194–99. Bochum: IEEE, 2013.","apa":"Windmann, S., Jiao, S., Niggemann, O., & Borcherding, H. (2013). A Stochastic Method for the Detection of Anomalous Energy Consumption in Hybrid Industrial Systems. In 11th International IEEE Conference on Industrial Informatics (pp. 194–199). Bochum: IEEE.","ufg":"Windmann, Stefan et. al. (2013): A Stochastic Method for the Detection of Anomalous Energy Consumption in Hybrid Industrial Systems, in: 11th International IEEE Conference on Industrial Informatics, Bochum, S. 194–199.","bjps":"Windmann S et al. (2013) A Stochastic Method for the Detection of Anomalous Energy Consumption in Hybrid Industrial Systems. 11th International IEEE Conference on Industrial Informatics. Bochum: IEEE, pp. 194–199.","mla":"Windmann, Stefan, et al. “A Stochastic Method for the Detection of Anomalous Energy Consumption in Hybrid Industrial Systems.” 11th International IEEE Conference on Industrial Informatics, IEEE, 2013, pp. 194–99.","havard":"S. Windmann, S. Jiao, O. Niggemann, H. Borcherding, A Stochastic Method for the Detection of Anomalous Energy Consumption in Hybrid Industrial Systems, in: 11th International IEEE Conference on Industrial Informatics, IEEE, Bochum, 2013: pp. 194–199.","van":"Windmann S, Jiao S, Niggemann O, Borcherding H. A Stochastic Method for the Detection of Anomalous Energy Consumption in Hybrid Industrial Systems. In: 11th International IEEE Conference on Industrial Informatics. Bochum: IEEE; 2013. p. 194–9."},"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"conference":{"start_date":"20013-07-29","end_date":"2013-07-31","location":"Bochum","name":"11th International IEEE Conference on Industrial Informatics"},"year":2013,"author":[{"id":"58525","last_name":"Windmann","full_name":"Windmann, Stefan","first_name":"Stefan"},{"first_name":"Shuo","last_name":"Jiao","full_name":"Jiao, Shuo"},{"last_name":"Niggemann","first_name":"Oliver","id":"10876","full_name":"Niggemann, Oliver"},{"first_name":"Holger","id":"1693","full_name":"Borcherding, Holger","last_name":"Borcherding"}],"abstract":[{"lang":"eng","text":"In the presented work, the detection of anomalous energy consumption in hybrid industrial production systems is investigated. A model-based approach with a timed hybrid automaton as overall system model is employed for anomaly detection. The approach is based on the assumption of several system modes, i.e. phases with continuous system behavior. Transitions between the modes are attributed to discrete control events such as on/off signals. The underlying discrete event system which comprises both system modes and transitions is modeled as finite state machine. The focus of this paper is set on the modeling of the energy consumption in the particular system modes. Sequences of stochastic state space models are employed for this purpose. Model learning and anomaly detection for this approach are considered. The proposed approach is further evaluated in a small model factory. The experimental results show significant improvements compared to existing approaches to anomaly detection in hybrid industrial systems."}],"page":"194 - 199","status":"public","publisher":"IEEE"},{"intvolume":" 413","user_id":"15514","type":"conference","_id":"4379","doi":"10.1007/978-3-319-04406-4_21","place":"Cham","publication_status":"published","series_title":"Communications in Computer and Information Science","publisher":"Springer","abstract":[{"lang":"eng","text":"One of the open questions in the concept of ambient intelligence regards user interfaces to these invisible computers. If at all, how do they show up – and how does ambient intelligence in general and the user interfaces in particular change architectural space. As computers become ubiquitous or ambient, they create spatial relations towards other devices and to the place that they are located in. This paper formulates chances and challenges for both architecture and HCI."}],"conference":{"end_date":"2013-12-05","start_date":"201312-03","location":"Dublin, Ireland","name":"AmI 2013 Workshops"},"department":[{"_id":"DEP5023"}],"editor":[{"last_name":"O’Grady","first_name":"Michael ","full_name":"O’Grady, Michael "},{"full_name":" Vahdat-Nejad, Hamed","first_name":"Hamed","last_name":" Vahdat-Nejad"},{"last_name":" Wolf","first_name":"Klaus-Hendrik","full_name":" Wolf, Klaus-Hendrik"},{"last_name":" Dragone","first_name":"Mauro","full_name":" Dragone, Mauro"},{"full_name":"Ye, Juan ","last_name":"Ye","first_name":"Juan "},{"full_name":"Röcker, Carsten ","last_name":"Röcker","first_name":"Carsten "},{"full_name":" O'Hare, Gregory ","last_name":" O'Hare","first_name":"Gregory "}],"date_updated":"2023-03-15T13:49:52Z","publication_identifier":{"eisbn":["978-3-319-04406-4"],"issn":["1865-0929"],"isbn":["978-3-319-04405-7"]},"publication":"Evolving Ambient Intelligence","date_created":"2021-01-15T10:49:15Z","keyword":["Ambient Intelligence","Ubiquitous Computing","Smart Spaces","Aesthetics","Design","Architecture","HCI","Ambient Assisted Living"],"language":[{"iso":"eng"}],"oa":"1","volume":413,"citation":{"chicago-de":"Kasugai, Kai und Carsten Röcker. 2013. Computer-Mediated Human Architecture Interaction. In: Evolving Ambient Intelligence, hg. von Michael O’Grady, Hamed Vahdat-Nejad, Klaus-Hendrik Wolf, Mauro Dragone, Juan Ye, Carsten Röcker, und Gregory O’Hare, 413:213–216. Communications in Computer and Information Science. Cham: Springer. doi:10.1007/978-3-319-04406-4_21, .","din1505-2-1":"Kasugai, Kai ; Röcker, Carsten: Computer-Mediated Human Architecture Interaction. In: O’Grady, M. ; Vahdat-Nejad, H. ; Wolf, K.-H. ; Dragone, M. ; Ye, J. ; Röcker, C. ; O’Hare, G. (Hrsg.): Evolving Ambient Intelligence, Communications in Computer and Information Science. Bd. 413. Cham : Springer, 2013, S. 213–216","short":"K. Kasugai, C. Röcker, in: M. O’Grady, H. Vahdat-Nejad, K.-H. Wolf, M. Dragone, J. Ye, C. Röcker, G. O’Hare (Eds.), Evolving Ambient Intelligence, Springer, Cham, 2013, pp. 213–216.","havard":"K. Kasugai, C. Röcker, Computer-Mediated Human Architecture Interaction, in: M. O’Grady, H. Vahdat-Nejad, K.-H. Wolf, M. Dragone, J. Ye, C. Röcker, G. O’Hare (Eds.), Evolving Ambient Intelligence, Springer, Cham, 2013: pp. 213–216.","mla":"Kasugai, Kai, and Carsten Röcker. “Computer-Mediated Human Architecture Interaction.” Evolving Ambient Intelligence, edited by Michael O’Grady et al., vol. 413, Springer, 2013, pp. 213–16, doi:10.1007/978-3-319-04406-4_21.","bjps":"Kasugai K and Röcker C (2013) Computer-Mediated Human Architecture Interaction. In O’Grady M et al. (eds), Evolving Ambient Intelligence, vol. 413. Cham: Springer, pp. 213–216.","ufg":"Kasugai, Kai/Röcker, Carsten (2013): Computer-Mediated Human Architecture Interaction, in: Michael O’Grady et. al. (Hgg.): Evolving Ambient Intelligence (=Communications in Computer and Information Science 413), Cham, S. 213–216.","ama":"Kasugai K, Röcker C. Computer-Mediated Human Architecture Interaction. In: O’Grady M, Vahdat-Nejad H, Wolf K-H, et al., eds. Evolving Ambient Intelligence. Vol 413. Communications in Computer and Information Science. Cham: Springer; 2013:213-216. doi:10.1007/978-3-319-04406-4_21","van":"Kasugai K, Röcker C. Computer-Mediated Human Architecture Interaction. In: O’Grady M, Vahdat-Nejad H, Wolf K-H, Dragone M, Ye J, Röcker C, et al., editors. Evolving Ambient Intelligence. Cham: Springer; 2013. p. 213–6. (Communications in Computer and Information Science; vol. 413).","chicago":"Kasugai, Kai, and Carsten Röcker. “Computer-Mediated Human Architecture Interaction.” In Evolving Ambient Intelligence, edited by Michael O’Grady, Hamed Vahdat-Nejad, Klaus-Hendrik Wolf, Mauro Dragone, Juan Ye, Carsten Röcker, and Gregory O’Hare, 413:213–16. Communications in Computer and Information Science. Cham: Springer, 2013. https://doi.org/10.1007/978-3-319-04406-4_21.","ieee":"K. Kasugai and C. Röcker, “Computer-Mediated Human Architecture Interaction,” in Evolving Ambient Intelligence, Dublin, Ireland, 2013, vol. 413, pp. 213–216.","apa":"Kasugai, K., & Röcker, C. (2013). Computer-Mediated Human Architecture Interaction. In M. O’Grady, H. Vahdat-Nejad, K.-H. Wolf, M. Dragone, J. Ye, C. Röcker, & G. O’Hare (Eds.), Evolving Ambient Intelligence (Vol. 413, pp. 213–216). Cham: Springer. https://doi.org/10.1007/978-3-319-04406-4_21"},"title":"Computer-Mediated Human Architecture Interaction","extern":"1","status":"public","page":"213-216","author":[{"full_name":"Kasugai, Kai","last_name":"Kasugai","first_name":"Kai"},{"id":"61525","last_name":"Röcker","full_name":"Röcker, Carsten","first_name":"Carsten"}],"main_file_link":[{"open_access":"1"}],"year":2013},{"publication_status":"published","publisher":"ACM","abstract":[{"lang":"eng","text":"Research in the area of smart healthcare systems has reached a point where significant improvements are only possible if academics and practitioners from various disciplines collaborate in order to develop new strategies for conceptualizing, designing, and implementing new applications. The underlying strategies must be harmonized and balanced in two ways: first, within the technological areas, and second, regarding the integration of technologies into the medical, cognitive, and social context. This also includes the way technology acts within the life courses of individuals and societies, and the balance of the benefits that technology brings against perceived or actual medical, social as well as ethical drawbacks. Therefore, this workshop aims to bring together researchers and industry practitioners from different fields to share their research positions and practical experiences and discuss new ideas, innovative approaches and challenging research questions, which have the potential to motivate future research activities within the field of smart healthcare systems."}],"conference":{"location":"Melbourne, Australia","name":"OzCHI '13: Augmentation, Application, Innovation, Collaboration","start_date":"2013-11-25","end_date":"2013-11-26"},"department":[{"_id":"DEP5023"}],"user_id":"15514","type":"conference","_id":"4380","place":"New York","citation":{"short":"C. Röcker, M. Ziefle, A. Holzinger, K. McGee, S. Hansen, J. Meyer, in: H. Shen, R. Smith, J. Paay, Association for Computing MachineryNew YorkNYUnited States (Eds.), Proceedings of the 25th Australian Computer-Human Interaction Conference Augmentation, Application, Innovation, Collaboration , ACM, New York, 2013, pp. 213–216.","din1505-2-1":"Röcker, Carsten ; Ziefle, Martina ; Holzinger, Andreas ; McGee, Kevin ; Hansen, Susan ; Meyer, Jochen: SmartHEALTH: 5th International Workshop on Smart Healthcare and Wellness Applications. In: Shen, H. ; Smith, R. ; Paay, J. ; Association for Computing MachineryNew YorkNYUnited States (Hrsg.): Proceedings of the 25th Australian Computer-Human Interaction Conference Augmentation, Application, Innovation, Collaboration . New York : ACM, 2013, S. 213–216","chicago-de":"Röcker, Carsten, Martina Ziefle, Andreas Holzinger, Kevin McGee, Susan Hansen und Jochen Meyer. 2013. SmartHEALTH: 5th International Workshop on Smart Healthcare and Wellness Applications. In: Proceedings of the 25th Australian Computer-Human Interaction Conference Augmentation, Application, Innovation, Collaboration , hg. von Haifeng Shen, Ross Smith, Jeni Paay, und Association for Computing MachineryNew YorkNYUnited States, 213–216. New York: ACM.","apa":"Röcker, C., Ziefle, M., Holzinger, A., McGee, K., Hansen, S., & Meyer, J. (2013). SmartHEALTH: 5th International Workshop on Smart Healthcare and Wellness Applications. In H. Shen, R. Smith, J. Paay, & Association for Computing MachineryNew YorkNYUnited States (Eds.), Proceedings of the 25th Australian Computer-Human Interaction Conference Augmentation, Application, Innovation, Collaboration (pp. 213–216). New York: ACM.","chicago":"Röcker, Carsten, Martina Ziefle, Andreas Holzinger, Kevin McGee, Susan Hansen, and Jochen Meyer. “SmartHEALTH: 5th International Workshop on Smart Healthcare and Wellness Applications.” In Proceedings of the 25th Australian Computer-Human Interaction Conference Augmentation, Application, Innovation, Collaboration , edited by Haifeng Shen, Ross Smith, Jeni Paay, and Association for Computing MachineryNew YorkNYUnited States, 213–16. New York: ACM, 2013.","van":"Röcker C, Ziefle M, Holzinger A, McGee K, Hansen S, Meyer J. SmartHEALTH: 5th International Workshop on Smart Healthcare and Wellness Applications. In: Shen H, Smith R, Paay J, Association for Computing MachineryNew YorkNYUnited States, editors. Proceedings of the 25th Australian Computer-Human Interaction Conference Augmentation, Application, Innovation, Collaboration . New York: ACM; 2013. p. 213–6.","ufg":"Röcker, Carsten et. al. (2013): SmartHEALTH: 5th International Workshop on Smart Healthcare and Wellness Applications, in: Haifeng Shen et. al. (Hgg.): Proceedings of the 25th Australian Computer-Human Interaction Conference Augmentation, Application, Innovation, Collaboration , New York, S. 213–216.","havard":"C. Röcker, M. Ziefle, A. Holzinger, K. McGee, S. Hansen, J. Meyer, SmartHEALTH: 5th International Workshop on Smart Healthcare and Wellness Applications, in: H. Shen, R. Smith, J. Paay, Association for Computing MachineryNew YorkNYUnited States (Eds.), Proceedings of the 25th Australian Computer-Human Interaction Conference Augmentation, Application, Innovation, Collaboration , ACM, New York, 2013: pp. 213–216.","bjps":"Röcker C et al. (2013) SmartHEALTH: 5th International Workshop on Smart Healthcare and Wellness Applications. In Shen H et al. (eds), Proceedings of the 25th Australian Computer-Human Interaction Conference Augmentation, Application, Innovation, Collaboration . New York: ACM, pp. 213–216.","mla":"Röcker, Carsten, et al. “SmartHEALTH: 5th International Workshop on Smart Healthcare and Wellness Applications.” Proceedings of the 25th Australian Computer-Human Interaction Conference Augmentation, Application, Innovation, Collaboration , edited by Haifeng Shen et al., ACM, 2013, pp. 213–16.","ieee":"C. Röcker, M. Ziefle, A. Holzinger, K. McGee, S. Hansen, and J. Meyer, “SmartHEALTH: 5th International Workshop on Smart Healthcare and Wellness Applications,” in Proceedings of the 25th Australian Computer-Human Interaction Conference Augmentation, Application, Innovation, Collaboration , Melbourne, Australia, 2013, pp. 213–216.","ama":"Röcker C, Ziefle M, Holzinger A, McGee K, Hansen S, Meyer J. SmartHEALTH: 5th International Workshop on Smart Healthcare and Wellness Applications. In: Shen H, Smith R, Paay J, Association for Computing MachineryNew YorkNYUnited States, eds. Proceedings of the 25th Australian Computer-Human Interaction Conference Augmentation, Application, Innovation, Collaboration . New York: ACM; 2013:213-216."},"title":"SmartHEALTH: 5th International Workshop on Smart Healthcare and Wellness Applications","extern":"1","status":"public","page":"213-216","main_file_link":[{"open_access":"1","url":"https://www.researchgate.net/profile/Carsten_Roecker/publication/265375945_SmartHEALTH_5th_International_Workshop_on_Smart_Healthcare_and_Wellness_Applications/links/5409d9ba0cf2d8daaabf99bc/SmartHEALTH-5th-International-Workshop-on-Smart-Healthcare-and-Wellness-Applications.pdf"}],"author":[{"full_name":"Röcker, Carsten","first_name":"Carsten","last_name":"Röcker","id":"61525"},{"full_name":"Ziefle, Martina","last_name":"Ziefle","first_name":"Martina"},{"full_name":"Holzinger, Andreas","last_name":"Holzinger","first_name":"Andreas"},{"full_name":"McGee, Kevin","first_name":"Kevin","last_name":"McGee"},{"first_name":"Susan","last_name":"Hansen","full_name":"Hansen, Susan"},{"full_name":"Meyer, Jochen","last_name":"Meyer","first_name":"Jochen"}],"year":2013,"corporate_editor":["Association for Computing MachineryNew YorkNYUnited States"],"editor":[{"first_name":"Haifeng","last_name":"Shen","full_name":"Shen, Haifeng"},{"first_name":"Ross","last_name":"Smith","full_name":"Smith, Ross"},{"first_name":"Jeni","full_name":"Paay, Jeni","last_name":"Paay"}],"date_updated":"2023-03-15T13:49:52Z","publication_identifier":{"isbn":["978-1-4503-2525-7"]},"publication":"Proceedings of the 25th Australian Computer-Human Interaction Conference Augmentation, Application, Innovation, Collaboration ","date_created":"2021-01-15T10:49:17Z","keyword":["Erfahrungsaustausch","Forschung","Gesundheitssystem","Medizin","Neue Technologie","Praxis"],"language":[{"iso":"eng"}],"oa":"1"},{"volume":1,"citation":{"ufg":"Sack, Oliver/Röcker, Carsten (2013): Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups, in: Universal Journal of Psychology 1 (2), S. 72–83.","mla":"Sack, Oliver, and Carsten Röcker. “Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups.” Universal Journal of Psychology, vol. 1, no. 2, Horizion , 2013, pp. 72–83, doi:10.13189/ujp.2013.010207.","bjps":"Sack O and Röcker C (2013) Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups. Universal Journal of Psychology 1, 72–83.","havard":"O. Sack, C. Röcker, Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups, Universal Journal of Psychology. 1 (2013) 72–83.","van":"Sack O, Röcker C. Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups. Universal Journal of Psychology. 2013;1(2):72–83.","chicago":"Sack, Oliver, and Carsten Röcker. “Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups.” Universal Journal of Psychology 1, no. 2 (2013): 72–83. https://doi.org/10.13189/ujp.2013.010207.","apa":"Sack, O., & Röcker, C. (2013). Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups. Universal Journal of Psychology, 1(2), 72–83. https://doi.org/10.13189/ujp.2013.010207","din1505-2-1":"Sack, Oliver ; Röcker, Carsten: Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups. In: Universal Journal of Psychology Bd. 1. Alhambra, Calif., Horizion (2013), Nr. 2, S. 72–83","chicago-de":"Sack, Oliver und Carsten Röcker. 2013. Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups. Universal Journal of Psychology 1, Nr. 2: 72–83. doi:10.13189/ujp.2013.010207, .","short":"O. Sack, C. Röcker, Universal Journal of Psychology 1 (2013) 72–83.","ama":"Sack O, Röcker C. Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups. Universal Journal of Psychology. 2013;1(2):72-83. doi:10.13189/ujp.2013.010207","ieee":"O. Sack and C. Röcker, “Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups,” Universal Journal of Psychology, vol. 1, no. 2, pp. 72–83, 2013."},"title":"Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups","extern":"1","status":"public","page":"72 - 83","main_file_link":[{"open_access":"1"}],"year":2013,"author":[{"full_name":"Sack, Oliver","first_name":"Oliver","last_name":"Sack"},{"full_name":"Röcker, Carsten","first_name":"Carsten","last_name":"Röcker","id":"61525"}],"date_updated":"2023-03-15T13:49:52Z","publication":"Universal Journal of Psychology","publication_identifier":{"isbn":["2332-3477"],"eissn":["2332-3485 "]},"date_created":"2021-01-15T10:49:18Z","keyword":["Technology-enhanced Environment","Ambient Assisted Living","Mental Model","Teach Back","Privacy","Security"],"language":[{"iso":"eng"}],"oa":"1","publication_status":"published","publisher":"Horizion ","department":[{"_id":"DEP5023"}],"abstract":[{"text":"This article reports on two user studies exploring the knowledge of end users about technical processes of technology-enhanced home environments, which are often assumed to play an important role for attitudes such as privacy and security. In the first study (n=12 participants between 19-71 years of age), we analyzed user knowledge about technical processes using the teach-back methodology. In the second study, we additionally applied new developed questionnaires and analyzed participants’ data (n=24 participants between 19-76 years of age) regarding relations of user factors, users’ knowledge about technical processes and attitudes such as privacy and security of technology-enhanced environments. In contrast to existing assumptions, the results showed that general structural knowledge about technical processes was not related with attitudes such as privacy and security. Additionally, we found that most participants had only relatively superficial knowledge about technical processes, which was further influenced by age and technology experience.","lang":"eng"}],"issue":"2","user_id":"15514","intvolume":" 1","type":"journal_article","place":" Alhambra, Calif.","_id":"4381","doi":"10.13189/ujp.2013.010207"},{"department":[{"_id":"DEP5023"}],"conference":{"end_date":"2013-12-05","start_date":"2013-12-03","name":"4th International Joint Conference, AmI 2013","location":"Dublin, Ireland"},"abstract":[{"lang":"eng","text":"This paper illustrates the motivation and objectives of the third international workshop on Aesthetic Intelligence. The workshop aims at bringing together researchers as well as industry practitioners from the fields of computer science, engineering, architecture, industrial and interface design to discuss ongoing research activities and emerging trends in the area of smart environments. A special focus of the workshop is on the role of aesthetic design for the acceptance and adoption of services in smart environments. "}],"publisher":"Springer","series_title":"Lecture Notes in Computer Science","publication_status":"published","place":"Cham","doi":"10.1007/978-3-319-03647-2","_id":"4382","type":"book_chapter","user_id":"15514","intvolume":" 8309","main_file_link":[{"open_access":"1","url":"https://link.springer.com/book/10.1007/978-3-319-03647-2"}],"year":2013,"author":[{"last_name":"Röcker","first_name":"Carsten","id":"61525","full_name":"Röcker, Carsten"},{"full_name":"Kasugai, Kai","first_name":"Kai","last_name":"Kasugai"},{"first_name":"D. A.","full_name":"Plewe, D. A.","last_name":"Plewe"},{"first_name":"Takashi","full_name":"Kiriyama, Takashi","last_name":"Kiriyama"},{"full_name":"Rozendaal, Marco","first_name":"Marco","last_name":"Rozendaal"}],"page":"307-308","status":"public","extern":"1","title":"When Design Meets Intelligence: Incorporating Aesthetic Intelligence in Smart Spaces","citation":{"chicago":"Röcker, Carsten, Kai Kasugai, D. A. Plewe, Takashi Kiriyama, and Marco Rozendaal. “When Design Meets Intelligence: Incorporating Aesthetic Intelligence in Smart Spaces.” In Ambient Intelligence, edited by Juan Carlos Augusto and International Joint Conferences on Ambient Intelligence ; Aml, 8309:307–8. Lecture Notes in Computer Science. Cham: Springer, 2013. https://doi.org/10.1007/978-3-319-03647-2.","apa":"Röcker, C., Kasugai, K., Plewe, D. A., Kiriyama, T., & Rozendaal, M. (2013). When Design Meets Intelligence: Incorporating Aesthetic Intelligence in Smart Spaces. In J. C. Augusto & International Joint Conferences on Ambient Intelligence ; Aml (Eds.), Ambient Intelligence (Vol. 8309, pp. 307–308). Cham: Springer. https://doi.org/10.1007/978-3-319-03647-2","ufg":"Röcker, Carsten et. al. (2013): When Design Meets Intelligence: Incorporating Aesthetic Intelligence in Smart Spaces, in: Juan Carlos Augusto/International Joint Conferences on Ambient Intelligence ; Aml (Hgg.): Ambient Intelligence (=Lecture Notes in Computer Science 8309), Cham, S. 307–308.","havard":"C. Röcker, K. Kasugai, D.A. Plewe, T. Kiriyama, M. Rozendaal, When Design Meets Intelligence: Incorporating Aesthetic Intelligence in Smart Spaces, in: J.C. Augusto, International Joint Conferences on Ambient Intelligence ; Aml (Eds.), Ambient Intelligence, Springer, Cham, 2013: pp. 307–308.","mla":"Röcker, Carsten, et al. “When Design Meets Intelligence: Incorporating Aesthetic Intelligence in Smart Spaces.” Ambient Intelligence, edited by Juan Carlos Augusto and International Joint Conferences on Ambient Intelligence ; Aml, vol. 8309, Springer, 2013, pp. 307–08, doi:10.1007/978-3-319-03647-2.","bjps":"Röcker C et al. (2013) When Design Meets Intelligence: Incorporating Aesthetic Intelligence in Smart Spaces. In Augusto JC and International Joint Conferences on Ambient Intelligence ; Aml (eds), Ambient Intelligence, vol. 8309. Cham: Springer, pp. 307–308.","van":"Röcker C, Kasugai K, Plewe DA, Kiriyama T, Rozendaal M. When Design Meets Intelligence: Incorporating Aesthetic Intelligence in Smart Spaces. In: Augusto JC, International Joint Conferences on Ambient Intelligence ; Aml, editors. Ambient Intelligence. Cham: Springer; 2013. p. 307–8. (Lecture Notes in Computer Science; vol. 8309).","din1505-2-1":"Röcker, Carsten ; Kasugai, Kai ; Plewe, D. A. ; Kiriyama, Takashi ; Rozendaal, Marco: When Design Meets Intelligence: Incorporating Aesthetic Intelligence in Smart Spaces. In: Augusto, J. C. ; International Joint Conferences on Ambient Intelligence ; Aml (Hrsg.): Ambient Intelligence, Lecture Notes in Computer Science. Bd. 8309. Cham : Springer, 2013, S. 307–308","chicago-de":"Röcker, Carsten, Kai Kasugai, D. A. Plewe, Takashi Kiriyama und Marco Rozendaal. 2013. When Design Meets Intelligence: Incorporating Aesthetic Intelligence in Smart Spaces. In: Ambient Intelligence, hg. von Juan Carlos Augusto und International Joint Conferences on Ambient Intelligence ; Aml, 8309:307–308. Lecture Notes in Computer Science. Cham: Springer. doi:10.1007/978-3-319-03647-2, .","short":"C. Röcker, K. Kasugai, D.A. Plewe, T. Kiriyama, M. Rozendaal, in: J.C. Augusto, International Joint Conferences on Ambient Intelligence ; Aml (Eds.), Ambient Intelligence, Springer, Cham, 2013, pp. 307–308.","ieee":"C. Röcker, K. Kasugai, D. A. Plewe, T. Kiriyama, and M. Rozendaal, “When Design Meets Intelligence: Incorporating Aesthetic Intelligence in Smart Spaces,” in Ambient Intelligence, vol. 8309, J. C. Augusto and International Joint Conferences on Ambient Intelligence ; Aml, Eds. Cham: Springer, 2013, pp. 307–308.","ama":"Röcker C, Kasugai K, Plewe DA, Kiriyama T, Rozendaal M. When Design Meets Intelligence: Incorporating Aesthetic Intelligence in Smart Spaces. In: Augusto JC, International Joint Conferences on Ambient Intelligence ; Aml, eds. Ambient Intelligence. Vol 8309. Lecture Notes in Computer Science. Cham: Springer; 2013:307-308. doi:10.1007/978-3-319-03647-2"},"volume":8309,"oa":"1","language":[{"iso":"eng"}],"keyword":["Ambient Intelligence","Ubiquitous Computing","Smart Spaces","Aesthetics","Design","Architecture","Urban Informatics"],"date_created":"2021-01-15T10:49:20Z","publication":"Ambient Intelligence","publication_identifier":{"isbn":["978-3-319-03646-5"],"issn":["0302-9743"],"eisbn":["978-3-319-03647-2"]},"related_material":{"link":[{"url":"https://www.researchgate.net/profile/Carsten_Roecker/publication/265375942_When_Design_Meets_Intelligence_Incorporating_Aesthetic_Intelligence_in_Smart_Spaces/links/5409d98c0cf2df04e7491a6b/When-Design-Meets-Intelligence-Incorporating-Aesthetic-Intelligence-in-Smart-Spaces.pdf","relation":"original"}]},"date_updated":"2023-03-15T13:49:52Z","editor":[{"first_name":"Juan Carlos","full_name":"Augusto, Juan Carlos","last_name":"Augusto"}],"corporate_editor":["International Joint Conferences on Ambient Intelligence ; Aml"]},{"date_created":"2021-01-15T10:49:21Z","publication_identifier":{"issn":["1847-2001 "],"eissn":["1848-2295"]},"publication":"Central European Conference on Information and Intelligent Systems","editor":[{"last_name":"Hunjak","first_name":"Tihomir ","full_name":"Hunjak, Tihomir "},{"first_name":"Sandra ","full_name":"Lovrenčić, Sandra ","last_name":"Lovrenčić"},{"full_name":"Tomičić, Igor ","first_name":"Igor ","last_name":"Tomičić"}],"corporate_editor":["University of Zagreb, Faculty of Organization and Informatics Varaždin"],"date_updated":"2023-03-15T13:49:52Z","oa":"1","language":[{"iso":"eng"}],"keyword":["User-Centered Design","Ambient Assisted Living","Intelligent Environments","Design Requirements."],"extern":"1","title":"User-Centered Design of Intelligent Environments: Requirements for Designing Successful Ambient Assisted Living Systems","citation":{"chicago":"Röcker, Carsten. “User-Centered Design of Intelligent Environments: Requirements for Designing Successful Ambient Assisted Living Systems.” In Central European Conference on Information and Intelligent Systems, edited by Tihomir Hunjak, Sandra Lovrenčić, Igor Tomičić, and University of Zagreb, Faculty of Organization and Informatics Varaždin, 4–11. Zagreb: University of , Faculty of Organization and Informatics Varaždin, 2013.","apa":"Röcker, C. (2013). User-Centered Design of Intelligent Environments: Requirements for Designing Successful Ambient Assisted Living Systems. In T. Hunjak, S. Lovrenčić, I. Tomičić, & University of Zagreb, Faculty of Organization and Informatics Varaždin (Eds.), Central European Conference on Information and Intelligent Systems (pp. 4–11). Zagreb: University of , Faculty of Organization and Informatics Varaždin.","havard":"C. Röcker, User-Centered Design of Intelligent Environments: Requirements for Designing Successful Ambient Assisted Living Systems, in: T. Hunjak, S. Lovrenčić, I. Tomičić, University of Zagreb, Faculty of Organization and Informatics Varaždin (Eds.), Central European Conference on Information and Intelligent Systems, University of , Faculty of Organization and Informatics Varaždin, Zagreb, 2013: pp. 4–11.","bjps":"Röcker C (2013) User-Centered Design of Intelligent Environments: Requirements for Designing Successful Ambient Assisted Living Systems. In Hunjak T et al. (eds), Central European Conference on Information and Intelligent Systems. Zagreb: University of , Faculty of Organization and Informatics Varaždin, pp. 4–11.","mla":"Röcker, Carsten. “User-Centered Design of Intelligent Environments: Requirements for Designing Successful Ambient Assisted Living Systems.” Central European Conference on Information and Intelligent Systems, edited by Tihomir Hunjak et al., University of , Faculty of Organization and Informatics Varaždin, 2013, pp. 4–11.","ufg":"Röcker, Carsten (2013): User-Centered Design of Intelligent Environments: Requirements for Designing Successful Ambient Assisted Living Systems, in: Tihomir Hunjak et. al. (Hgg.): Central European Conference on Information and Intelligent Systems, Zagreb, S. 4–11.","van":"Röcker C. User-Centered Design of Intelligent Environments: Requirements for Designing Successful Ambient Assisted Living Systems. In: Hunjak T, Lovrenčić S, Tomičić I, University of Zagreb, Faculty of Organization and Informatics Varaždin, editors. Central European Conference on Information and Intelligent Systems. Zagreb: University of , Faculty of Organization and Informatics Varaždin; 2013. p. 4–11.","chicago-de":"Röcker, Carsten. 2013. User-Centered Design of Intelligent Environments: Requirements for Designing Successful Ambient Assisted Living Systems. In: Central European Conference on Information and Intelligent Systems, hg. von Tihomir Hunjak, Sandra Lovrenčić, Igor Tomičić, und University of Zagreb, Faculty of Organization and Informatics Varaždin, 4–11. Zagreb: University of , Faculty of Organization and Informatics Varaždin.","din1505-2-1":"Röcker, Carsten: User-Centered Design of Intelligent Environments: Requirements for Designing Successful Ambient Assisted Living Systems. In: Hunjak, T. ; Lovrenčić, S. ; Tomičić, I. ; University of Zagreb, Faculty of Organization and Informatics Varaždin (Hrsg.): Central European Conference on Information and Intelligent Systems. Zagreb : University of , Faculty of Organization and Informatics Varaždin, 2013, S. 4–11","short":"C. Röcker, in: T. Hunjak, S. Lovrenčić, I. Tomičić, University of Zagreb, Faculty of Organization and Informatics Varaždin (Eds.), Central European Conference on Information and Intelligent Systems, University of , Faculty of Organization and Informatics Varaždin, Zagreb, 2013, pp. 4–11.","ieee":"C. Röcker, “User-Centered Design of Intelligent Environments: Requirements for Designing Successful Ambient Assisted Living Systems,” in Central European Conference on Information and Intelligent Systems, Varazdin, Croatia, 2013, pp. 4–11.","ama":"Röcker C. User-Centered Design of Intelligent Environments: Requirements for Designing Successful Ambient Assisted Living Systems. In: Hunjak T, Lovrenčić S, Tomičić I, University of Zagreb, Faculty of Organization and Informatics Varaždin, eds. Central European Conference on Information and Intelligent Systems. Zagreb: University of , Faculty of Organization and Informatics Varaždin; 2013:4-11."},"year":2013,"author":[{"last_name":"Röcker","first_name":"Carsten","id":"61525","full_name":"Röcker, Carsten"}],"main_file_link":[{"url":"http://archive.ceciis.foi.hr/app/index.php/ceciis/index/pages/view/invited2013Rocker","open_access":"1"}],"page":"4-11","status":"public","type":"conference","user_id":"15514","_id":"4383","place":"Zagreb","publication_status":"published","abstract":[{"lang":"eng","text":"With the emergence of technology-enhanced environments, new forms of communication and interaction will become possible. The initial design of such environments is likely to have a considerable impact on the way, people communicate and interact in the future. Hence, it is important to identify the requirements that potential users have, in order to accept and actually live in such intelligent spaces. This talk addresses the design, implementation and evaluation of future information and communication technologies. Based on different prototypes of Intelligent objects and environments, important aspects within an user-centered development process are illustrated. The focus of the talk is especially on the acceptances of alternative design concepts and the development of different communication prototypes, both for home and office use."}],"department":[{"_id":"DEP5023"}],"conference":{"location":" Varazdin, Croatia","name":"24rd Central European Conference on Information and Intelligent Systems","end_date":"2013-09-20","start_date":"2013-09-18"},"publisher":"University of , Faculty of Organization and Informatics Varaždin"},{"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2013,"author":[{"last_name":"Jasperneite","id":"1899","first_name":"Jürgen","full_name":"Jasperneite, Jürgen"}],"status":"public","title":"Intelligente Vernetzung in Produktion und Logistik ","citation":{"ama":"Jasperneite J. Intelligente Vernetzung in Produktion und Logistik . In: 14. TEAMLogistikforum (Vortrag). Paderborn; 2013.","ieee":"J. Jasperneite, “Intelligente Vernetzung in Produktion und Logistik ,” in 14. TEAMLogistikforum (Vortrag), 2013.","short":"J. Jasperneite, in: 14. TEAMLogistikforum (Vortrag), Paderborn, 2013.","chicago-de":"Jasperneite, Jürgen. 2013. Intelligente Vernetzung in Produktion und Logistik . In: 14. TEAMLogistikforum (Vortrag). Paderborn.","din1505-2-1":"Jasperneite, Jürgen: Intelligente Vernetzung in Produktion und Logistik . In: 14. TEAMLogistikforum (Vortrag). Paderborn, 2013","van":"Jasperneite J. Intelligente Vernetzung in Produktion und Logistik . In: 14 TEAMLogistikforum (Vortrag). Paderborn; 2013.","bjps":"Jasperneite J (2013) Intelligente Vernetzung in Produktion Und Logistik . 14. TEAMLogistikforum (Vortrag). Paderborn.","mla":"Jasperneite, Jürgen. “Intelligente Vernetzung in Produktion Und Logistik .” 14. TEAMLogistikforum (Vortrag), 2013.","havard":"J. Jasperneite, Intelligente Vernetzung in Produktion und Logistik , in: 14. TEAMLogistikforum (Vortrag), Paderborn, 2013.","ufg":"Jasperneite, Jürgen (2013): Intelligente Vernetzung in Produktion und Logistik , in: 14. TEAMLogistikforum (Vortrag), Paderborn.","apa":"Jasperneite, J. (2013). Intelligente Vernetzung in Produktion und Logistik . In 14. TEAMLogistikforum (Vortrag). Paderborn.","chicago":"Jasperneite, Jürgen. “Intelligente Vernetzung in Produktion Und Logistik .” In 14. TEAMLogistikforum (Vortrag). Paderborn, 2013."},"_id":"4636","language":[{"iso":"eng"}],"place":"Paderborn","type":"conference","date_created":"2021-01-28T11:01:42Z","publication":"14. TEAMLogistikforum (Vortrag)","date_updated":"2023-03-15T13:49:54Z","user_id":"74222"},{"_id":"4637","language":[{"iso":"eng"}],"date_updated":"2023-03-15T13:49:54Z","user_id":"74222","type":"conference","date_created":"2021-01-28T11:02:38Z","publication":"Jahreskolloquium Kommunikation in der Automation - KommA, Magdeburg","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2013,"author":[{"full_name":"Flatt, Holger","last_name":"Flatt","id":"58494","first_name":"Holger"},{"last_name":"Jasperneite","first_name":"Jürgen","full_name":"Jasperneite, Jürgen","id":"1899"},{"last_name":"Rauchfuß","first_name":"Joachim","full_name":"Rauchfuß, Joachim"}],"citation":{"van":"Flatt H, Jasperneite J, Rauchfuß J. Ein FPGA-Ansatz zur Anwendung von PRP/HSR-Redundanzprotokollen mit IEEE 1588 Zeitsynchronisation in der Automatisierungstechnik. In: Jahreskolloquium Kommunikation in der Automation - KommA, Magdeburg. 2013.","ama":"Flatt H, Jasperneite J, Rauchfuß J. Ein FPGA-Ansatz zur Anwendung von PRP/HSR-Redundanzprotokollen mit IEEE 1588 Zeitsynchronisation in der Automatisierungstechnik. In: Jahreskolloquium Kommunikation in Der Automation - KommA, Magdeburg. ; 2013.","ufg":"Flatt, Holger et. al. (2013): Ein FPGA-Ansatz zur Anwendung von PRP/HSR-Redundanzprotokollen mit IEEE 1588 Zeitsynchronisation in der Automatisierungstechnik, in: Jahreskolloquium Kommunikation in der Automation - KommA, Magdeburg.","mla":"Flatt, Holger, et al. “Ein FPGA-Ansatz Zur Anwendung von PRP/HSR-Redundanzprotokollen Mit IEEE 1588 Zeitsynchronisation in Der Automatisierungstechnik.” Jahreskolloquium Kommunikation in Der Automation - KommA, Magdeburg, 2013.","havard":"H. Flatt, J. Jasperneite, J. Rauchfuß, Ein FPGA-Ansatz zur Anwendung von PRP/HSR-Redundanzprotokollen mit IEEE 1588 Zeitsynchronisation in der Automatisierungstechnik, in: Jahreskolloquium Kommunikation in Der Automation - KommA, Magdeburg, 2013.","bjps":"Flatt H, Jasperneite J and Rauchfuß J (2013) Ein FPGA-Ansatz Zur Anwendung von PRP/HSR-Redundanzprotokollen Mit IEEE 1588 Zeitsynchronisation in Der Automatisierungstechnik. Jahreskolloquium Kommunikation in Der Automation - KommA, Magdeburg.","apa":"Flatt, H., Jasperneite, J., & Rauchfuß, J. (2013). Ein FPGA-Ansatz zur Anwendung von PRP/HSR-Redundanzprotokollen mit IEEE 1588 Zeitsynchronisation in der Automatisierungstechnik. In Jahreskolloquium Kommunikation in der Automation - KommA, Magdeburg.","ieee":"H. Flatt, J. Jasperneite, and J. Rauchfuß, “Ein FPGA-Ansatz zur Anwendung von PRP/HSR-Redundanzprotokollen mit IEEE 1588 Zeitsynchronisation in der Automatisierungstechnik,” in Jahreskolloquium Kommunikation in der Automation - KommA, Magdeburg, 2013.","chicago":"Flatt, Holger, Jürgen Jasperneite, and Joachim Rauchfuß. “Ein FPGA-Ansatz Zur Anwendung von PRP/HSR-Redundanzprotokollen Mit IEEE 1588 Zeitsynchronisation in Der Automatisierungstechnik.” In Jahreskolloquium Kommunikation in Der Automation - KommA, Magdeburg, 2013.","short":"H. Flatt, J. Jasperneite, J. Rauchfuß, in: Jahreskolloquium Kommunikation in Der Automation - KommA, Magdeburg, 2013.","din1505-2-1":"Flatt, Holger ; Jasperneite, Jürgen ; Rauchfuß, Joachim: Ein FPGA-Ansatz zur Anwendung von PRP/HSR-Redundanzprotokollen mit IEEE 1588 Zeitsynchronisation in der Automatisierungstechnik. In: Jahreskolloquium Kommunikation in der Automation - KommA, Magdeburg, 2013","chicago-de":"Flatt, Holger, Jürgen Jasperneite und Joachim Rauchfuß. 2013. Ein FPGA-Ansatz zur Anwendung von PRP/HSR-Redundanzprotokollen mit IEEE 1588 Zeitsynchronisation in der Automatisierungstechnik. In: Jahreskolloquium Kommunikation in der Automation - KommA, Magdeburg."},"title":"Ein FPGA-Ansatz zur Anwendung von PRP/HSR-Redundanzprotokollen mit IEEE 1588 Zeitsynchronisation in der Automatisierungstechnik"},{"_id":"4638","status":"public","language":[{"iso":"eng"}],"author":[{"full_name":"Schriegel, Sebastian","last_name":"Schriegel","first_name":"Sebastian"},{"full_name":"Flatt, Holger","id":"58494","last_name":"Flatt","first_name":"Holger"},{"full_name":"Jasperneite, Jürgen","first_name":"Jürgen","id":"1899","last_name":"Jasperneite"}],"year":2013,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"citation":{"chicago-de":"Schriegel, Sebastian, Holger Flatt und Jürgen Jasperneite. 2013. Gütegarantien für Zeitsynchronisationsgenauigkeit in IEEE 1588-Netzwerken durch standardisierte Gerätequalifizierung. In: .","din1505-2-1":"Schriegel, Sebastian ; Flatt, Holger ; Jasperneite, Jürgen: Gütegarantien für Zeitsynchronisationsgenauigkeit in IEEE 1588-Netzwerken durch standardisierte Gerätequalifizierung. In: , 2013","short":"S. Schriegel, H. Flatt, J. Jasperneite, in: 2013.","chicago":"Schriegel, Sebastian, Holger Flatt, and Jürgen Jasperneite. “Gütegarantien Für Zeitsynchronisationsgenauigkeit in IEEE 1588-Netzwerken Durch Standardisierte Gerätequalifizierung,” 2013.","ieee":"S. Schriegel, H. Flatt, and J. Jasperneite, “Gütegarantien für Zeitsynchronisationsgenauigkeit in IEEE 1588-Netzwerken durch standardisierte Gerätequalifizierung,” 2013.","apa":"Schriegel, S., Flatt, H., & Jasperneite, J. (2013). Gütegarantien für Zeitsynchronisationsgenauigkeit in IEEE 1588-Netzwerken durch standardisierte Gerätequalifizierung.","mla":"Schriegel, Sebastian, et al. Gütegarantien Für Zeitsynchronisationsgenauigkeit in IEEE 1588-Netzwerken Durch Standardisierte Gerätequalifizierung. 2013.","havard":"S. Schriegel, H. Flatt, J. Jasperneite, Gütegarantien für Zeitsynchronisationsgenauigkeit in IEEE 1588-Netzwerken durch standardisierte Gerätequalifizierung, in: 2013.","bjps":"Schriegel S, Flatt H and Jasperneite J (2013) Gütegarantien Für Zeitsynchronisationsgenauigkeit in IEEE 1588-Netzwerken Durch Standardisierte Gerätequalifizierung.","ufg":"Schriegel, Sebastian et. al. (2013): Gütegarantien für Zeitsynchronisationsgenauigkeit in IEEE 1588-Netzwerken durch standardisierte Gerätequalifizierung, in: .","ama":"Schriegel S, Flatt H, Jasperneite J. Gütegarantien für Zeitsynchronisationsgenauigkeit in IEEE 1588-Netzwerken durch standardisierte Gerätequalifizierung. In: ; 2013.","van":"Schriegel S, Flatt H, Jasperneite J. Gütegarantien für Zeitsynchronisationsgenauigkeit in IEEE 1588-Netzwerken durch standardisierte Gerätequalifizierung. In 2013."},"user_id":"74222","date_updated":"2023-03-15T13:49:54Z","title":"Gütegarantien für Zeitsynchronisationsgenauigkeit in IEEE 1588-Netzwerken durch standardisierte Gerätequalifizierung","type":"conference","date_created":"2021-01-28T11:03:31Z"},{"language":[{"iso":"eng"}],"_id":"4639","date_updated":"2023-03-15T13:49:54Z","user_id":"74222","type":"conference","date_created":"2021-01-28T11:05:36Z","publication":"Jahreskolloquium Kommunikation in der Automation - KommA, Magdeburg","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"id":"1899","first_name":"Jürgen","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen"}],"year":2013,"citation":{"chicago":"Jasperneite, Jürgen. “Industrial Automation Services as Part of the Cloud: First Experiences.” In Jahreskolloquium Kommunikation in Der Automation - KommA, Magdeburg, 2013.","apa":"Jasperneite, J. (2013). Industrial Automation Services as part of the Cloud: First experiences. In Jahreskolloquium Kommunikation in der Automation - KommA, Magdeburg.","bjps":"Jasperneite J (2013) Industrial Automation Services as Part of the Cloud: First Experiences. Jahreskolloquium Kommunikation in Der Automation - KommA, Magdeburg.","mla":"Jasperneite, Jürgen. “Industrial Automation Services as Part of the Cloud: First Experiences.” Jahreskolloquium Kommunikation in Der Automation - KommA, Magdeburg, 2013.","havard":"J. Jasperneite, Industrial Automation Services as part of the Cloud: First experiences, in: Jahreskolloquium Kommunikation in Der Automation - KommA, Magdeburg, 2013.","ufg":"Jasperneite, Jürgen (2013): Industrial Automation Services as part of the Cloud: First experiences, in: Jahreskolloquium Kommunikation in der Automation - KommA, Magdeburg.","van":"Jasperneite J. Industrial Automation Services as part of the Cloud: First experiences. In: Jahreskolloquium Kommunikation in der Automation - KommA, Magdeburg. 2013.","chicago-de":"Jasperneite, Jürgen. 2013. Industrial Automation Services as part of the Cloud: First experiences. In: Jahreskolloquium Kommunikation in der Automation - KommA, Magdeburg.","din1505-2-1":"Jasperneite, Jürgen: Industrial Automation Services as part of the Cloud: First experiences. In: Jahreskolloquium Kommunikation in der Automation - KommA, Magdeburg, 2013","short":"J. Jasperneite, in: Jahreskolloquium Kommunikation in Der Automation - KommA, Magdeburg, 2013.","ieee":"J. Jasperneite, “Industrial Automation Services as part of the Cloud: First experiences,” in Jahreskolloquium Kommunikation in der Automation - KommA, Magdeburg, 2013.","ama":"Jasperneite J. Industrial Automation Services as part of the Cloud: First experiences. In: Jahreskolloquium Kommunikation in Der Automation - KommA, Magdeburg. ; 2013."},"title":"Industrial Automation Services as part of the Cloud: First experiences"},{"_id":"4640","language":[{"iso":"eng"}],"publication":" Jahreskolloquium Kommunikation in der Automation - KommA, Magdeburg","type":"conference","date_created":"2021-01-28T11:06:29Z","user_id":"74222","date_updated":"2023-03-15T13:49:54Z","author":[{"first_name":"Tim","last_name":"Tack","full_name":"Tack, Tim"},{"first_name":"Jürgen","last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen"}],"year":2013,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public","title":"Application specific Automation Devices - the App-based approach","citation":{"van":"Tack T, Jasperneite J. Application specific Automation Devices - the App-based approach. In: Jahreskolloquium Kommunikation in der Automation - KommA, Magdeburg. 2013.","havard":"T. Tack, J. Jasperneite, Application specific Automation Devices - the App-based approach, in: Jahreskolloquium Kommunikation in Der Automation - KommA, Magdeburg, 2013.","bjps":"Tack T and Jasperneite J (2013) Application Specific Automation Devices - the App-Based Approach. Jahreskolloquium Kommunikation in Der Automation - KommA, Magdeburg.","mla":"Tack, Tim, and Jürgen Jasperneite. “Application Specific Automation Devices - the App-Based Approach.” Jahreskolloquium Kommunikation in Der Automation - KommA, Magdeburg, 2013.","ufg":"Tack, Tim/Jasperneite, Jürgen (2013): Application specific Automation Devices - the App-based approach, in: Jahreskolloquium Kommunikation in der Automation - KommA, Magdeburg.","apa":"Tack, T., & Jasperneite, J. (2013). Application specific Automation Devices - the App-based approach. In Jahreskolloquium Kommunikation in der Automation - KommA, Magdeburg.","chicago":"Tack, Tim, and Jürgen Jasperneite. “Application Specific Automation Devices - the App-Based Approach.” In Jahreskolloquium Kommunikation in Der Automation - KommA, Magdeburg, 2013.","short":"T. Tack, J. Jasperneite, in: Jahreskolloquium Kommunikation in Der Automation - KommA, Magdeburg, 2013.","chicago-de":"Tack, Tim und Jürgen Jasperneite. 2013. Application specific Automation Devices - the App-based approach. In: Jahreskolloquium Kommunikation in der Automation - KommA, Magdeburg.","din1505-2-1":"Tack, Tim ; Jasperneite, Jürgen: Application specific Automation Devices - the App-based approach. In: Jahreskolloquium Kommunikation in der Automation - KommA, Magdeburg, 2013","ama":"Tack T, Jasperneite J. Application specific Automation Devices - the App-based approach. In: Jahreskolloquium Kommunikation in Der Automation - KommA, Magdeburg. ; 2013.","ieee":"T. Tack and J. Jasperneite, “Application specific Automation Devices - the App-based approach,” in Jahreskolloquium Kommunikation in der Automation - KommA, Magdeburg, 2013."}},{"_id":"4641","language":[{"iso":"eng"}],"place":"Berlin","date_created":"2021-01-28T11:07:37Z","type":"conference","publication":"MIT Technology Review-Innovationskongress 2013: \"Die Fabrik der Zukunft\"","date_updated":"2023-03-15T13:49:54Z","user_id":"74222","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"full_name":"Jasperneite, Jürgen","first_name":"Jürgen","id":"1899","last_name":"Jasperneite"}],"year":2013,"publisher":"Heise-Verlag","status":"public","title":"Industrie 4.0 zum Anfassen: Beispiele aus der Lemgoer Modellfabrik (Vortrag)","citation":{"ufg":"Jasperneite, Jürgen (2013): Industrie 4.0 zum Anfassen: Beispiele aus der Lemgoer Modellfabrik (Vortrag), in: MIT Technology Review-Innovationskongress 2013: „Die Fabrik der Zukunft“, Berlin.","bjps":"Jasperneite J (2013) Industrie 4.0 Zum Anfassen: Beispiele Aus Der Lemgoer Modellfabrik (Vortrag). MIT Technology Review-Innovationskongress 2013: ‘Die Fabrik Der Zukunft’. Berlin: Heise-Verlag.","mla":"Jasperneite, Jürgen. “Industrie 4.0 Zum Anfassen: Beispiele Aus Der Lemgoer Modellfabrik (Vortrag).” MIT Technology Review-Innovationskongress 2013: “Die Fabrik Der Zukunft,” Heise-Verlag, 2013.","havard":"J. Jasperneite, Industrie 4.0 zum Anfassen: Beispiele aus der Lemgoer Modellfabrik (Vortrag), in: MIT Technology Review-Innovationskongress 2013: “Die Fabrik Der Zukunft,” Heise-Verlag, Berlin, 2013.","van":"Jasperneite J. Industrie 4.0 zum Anfassen: Beispiele aus der Lemgoer Modellfabrik (Vortrag). In: MIT Technology Review-Innovationskongress 2013: “Die Fabrik der Zukunft.” Berlin: Heise-Verlag; 2013.","chicago":"Jasperneite, Jürgen. “Industrie 4.0 Zum Anfassen: Beispiele Aus Der Lemgoer Modellfabrik (Vortrag).” In MIT Technology Review-Innovationskongress 2013: “Die Fabrik Der Zukunft.” Berlin: Heise-Verlag, 2013.","apa":"Jasperneite, J. (2013). Industrie 4.0 zum Anfassen: Beispiele aus der Lemgoer Modellfabrik (Vortrag). In MIT Technology Review-Innovationskongress 2013: “Die Fabrik der Zukunft.” Berlin: Heise-Verlag.","chicago-de":"Jasperneite, Jürgen. 2013. Industrie 4.0 zum Anfassen: Beispiele aus der Lemgoer Modellfabrik (Vortrag). In: MIT Technology Review-Innovationskongress 2013: „Die Fabrik der Zukunft“. Berlin: Heise-Verlag.","din1505-2-1":"Jasperneite, Jürgen: Industrie 4.0 zum Anfassen: Beispiele aus der Lemgoer Modellfabrik (Vortrag). In: MIT Technology Review-Innovationskongress 2013: „Die Fabrik der Zukunft“. Berlin : Heise-Verlag, 2013","short":"J. Jasperneite, in: MIT Technology Review-Innovationskongress 2013: “Die Fabrik Der Zukunft,” Heise-Verlag, Berlin, 2013.","ama":"Jasperneite J. Industrie 4.0 zum Anfassen: Beispiele aus der Lemgoer Modellfabrik (Vortrag). In: MIT Technology Review-Innovationskongress 2013: “Die Fabrik Der Zukunft.” Berlin: Heise-Verlag; 2013.","ieee":"J. Jasperneite, “Industrie 4.0 zum Anfassen: Beispiele aus der Lemgoer Modellfabrik (Vortrag),” in MIT Technology Review-Innovationskongress 2013: “Die Fabrik der Zukunft,” 2013."}},{"_id":"4642","place":"München","language":[{"iso":"eng"}],"publication":"1. MarktTechnik Summit Industrie 4.0","date_created":"2021-01-28T11:08:47Z","type":"conference","user_id":"83780","date_updated":"2024-03-26T09:13:09Z","year":"2013","author":[{"first_name":"Jürgen","full_name":"Jasperneite, Jürgen","id":"1899","last_name":"Jasperneite"}],"department":[{"_id":"DEP5023"}],"publisher":"WEKA FACHMEDIEN (Vortrag)","status":"public","title":"Wie die Intelligenz in die Fabrik kommt!","citation":{"apa":"Jasperneite, J. (2013). Wie die Intelligenz in die Fabrik kommt! 1. MarktTechnik Summit Industrie 4.0.","ieee":"J. Jasperneite, “Wie die Intelligenz in die Fabrik kommt!,” 2013.","chicago":"Jasperneite, Jürgen. “Wie Die Intelligenz in Die Fabrik Kommt!” In 1. MarktTechnik Summit Industrie 4.0. München: WEKA FACHMEDIEN (Vortrag), 2013.","van":"Jasperneite J. Wie die Intelligenz in die Fabrik kommt! In: 1 MarktTechnik Summit Industrie 40. München: WEKA FACHMEDIEN (Vortrag); 2013.","ama":"Jasperneite J. Wie die Intelligenz in die Fabrik kommt! In: 1. MarktTechnik Summit Industrie 4.0. WEKA FACHMEDIEN (Vortrag); 2013.","ufg":"Jasperneite, Jürgen: Wie die Intelligenz in die Fabrik kommt!, in: o. Hg.: 1. MarktTechnik Summit Industrie 4.0, München 2013.","mla":"Jasperneite, Jürgen. “Wie Die Intelligenz in Die Fabrik Kommt!” 1. MarktTechnik Summit Industrie 4.0, WEKA FACHMEDIEN (Vortrag), 2013.","havard":"J. Jasperneite, Wie die Intelligenz in die Fabrik kommt!, in: 1. MarktTechnik Summit Industrie 4.0, WEKA FACHMEDIEN (Vortrag), München, 2013.","bjps":"Jasperneite J (2013) Wie Die Intelligenz in Die Fabrik Kommt! 1. MarktTechnik Summit Industrie 4.0. München: WEKA FACHMEDIEN (Vortrag).","short":"J. Jasperneite, in: 1. MarktTechnik Summit Industrie 4.0, WEKA FACHMEDIEN (Vortrag), München, 2013.","chicago-de":"Jasperneite, Jürgen. 2013. Wie die Intelligenz in die Fabrik kommt! In: 1. MarktTechnik Summit Industrie 4.0. München: WEKA FACHMEDIEN (Vortrag).","din1505-2-1":"Jasperneite, Jürgen: Wie die Intelligenz in die Fabrik kommt! In: 1. MarktTechnik Summit Industrie 4.0. München : WEKA FACHMEDIEN (Vortrag), 2013"}},{"_id":"4643","language":[{"iso":"eng"}],"place":"München","date_updated":"2023-03-15T13:49:54Z","user_id":"74222","type":"conference","date_created":"2021-01-28T11:08:58Z","publication":"1. MarktTechnik Summit Industrie 4.0","publisher":"WEKA FACHMEDIEN (Vortrag)","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"id":"1899","first_name":"Jürgen","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen"}],"year":2013,"citation":{"chicago-de":"Jasperneite, Jürgen. 2013. Wie die Intelligenz in die Fabrik kommt! In: 1. MarktTechnik Summit Industrie 4.0. München: WEKA FACHMEDIEN (Vortrag).","din1505-2-1":"Jasperneite, Jürgen: Wie die Intelligenz in die Fabrik kommt! In: 1. MarktTechnik Summit Industrie 4.0. München : WEKA FACHMEDIEN (Vortrag), 2013","short":"J. Jasperneite, in: 1. MarktTechnik Summit Industrie 4.0, WEKA FACHMEDIEN (Vortrag), München, 2013.","ufg":"Jasperneite, Jürgen (2013): Wie die Intelligenz in die Fabrik kommt!, in: 1. MarktTechnik Summit Industrie 4.0, München.","bjps":"Jasperneite J (2013) Wie Die Intelligenz in Die Fabrik Kommt! 1. MarktTechnik Summit Industrie 4.0. München: WEKA FACHMEDIEN (Vortrag).","mla":"Jasperneite, Jürgen. “Wie Die Intelligenz in Die Fabrik Kommt!” 1. MarktTechnik Summit Industrie 4.0, WEKA FACHMEDIEN (Vortrag), 2013.","havard":"J. Jasperneite, Wie die Intelligenz in die Fabrik kommt!, in: 1. MarktTechnik Summit Industrie 4.0, WEKA FACHMEDIEN (Vortrag), München, 2013.","van":"Jasperneite J. Wie die Intelligenz in die Fabrik kommt! In: 1 MarktTechnik Summit Industrie 40. München: WEKA FACHMEDIEN (Vortrag); 2013.","chicago":"Jasperneite, Jürgen. “Wie Die Intelligenz in Die Fabrik Kommt!” In 1. MarktTechnik Summit Industrie 4.0. München: WEKA FACHMEDIEN (Vortrag), 2013.","apa":"Jasperneite, J. (2013). Wie die Intelligenz in die Fabrik kommt! In 1. MarktTechnik Summit Industrie 4.0. München: WEKA FACHMEDIEN (Vortrag).","ama":"Jasperneite J. Wie die Intelligenz in die Fabrik kommt! In: 1. MarktTechnik Summit Industrie 4.0. München: WEKA FACHMEDIEN (Vortrag); 2013.","ieee":"J. Jasperneite, “Wie die Intelligenz in die Fabrik kommt!,” in 1. MarktTechnik Summit Industrie 4.0, 2013."},"title":"Wie die Intelligenz in die Fabrik kommt!"},{"citation":{"din1505-2-1":"Flatt, Holger ; Schewe, Frank ; Jasperneite, Jürgen: An FPGA Based Cut-Through Switch Optimized for One-Step PTP and Real-Time Ethernet. In: at International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication 2013. Lemgo, 2013","chicago-de":"Flatt, Holger, Frank Schewe und Jürgen Jasperneite. 2013. An FPGA Based Cut-Through Switch Optimized for One-Step PTP and Real-Time Ethernet. In: at International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication 2013. Lemgo.","short":"H. Flatt, F. Schewe, J. Jasperneite, in: At International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication 2013, Lemgo, 2013.","chicago":"Flatt, Holger, Frank Schewe, and Jürgen Jasperneite. “An FPGA Based Cut-Through Switch Optimized for One-Step PTP and Real-Time Ethernet.” In At International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication 2013. Lemgo, 2013.","apa":"Flatt, H., Schewe, F., & Jasperneite, J. (2013). An FPGA Based Cut-Through Switch Optimized for One-Step PTP and Real-Time Ethernet. In at International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication 2013. Lemgo.","ufg":"Flatt, Holger et. al. (2013): An FPGA Based Cut-Through Switch Optimized for One-Step PTP and Real-Time Ethernet, in: at International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication 2013, Lemgo.","mla":"Flatt, Holger, et al. “An FPGA Based Cut-Through Switch Optimized for One-Step PTP and Real-Time Ethernet.” At International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication 2013, 2013.","havard":"H. Flatt, F. Schewe, J. Jasperneite, An FPGA Based Cut-Through Switch Optimized for One-Step PTP and Real-Time Ethernet, in: At International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication 2013, Lemgo, 2013.","bjps":"Flatt H, Schewe F and Jasperneite J (2013) An FPGA Based Cut-Through Switch Optimized for One-Step PTP and Real-Time Ethernet. At International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication 2013. Lemgo.","van":"Flatt H, Schewe F, Jasperneite J. An FPGA Based Cut-Through Switch Optimized for One-Step PTP and Real-Time Ethernet. In: at International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication 2013. Lemgo; 2013.","ieee":"H. Flatt, F. Schewe, and J. Jasperneite, “An FPGA Based Cut-Through Switch Optimized for One-Step PTP and Real-Time Ethernet,” in at International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication 2013, 2013.","ama":"Flatt H, Schewe F, Jasperneite J. An FPGA Based Cut-Through Switch Optimized for One-Step PTP and Real-Time Ethernet. In: At International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication 2013. Lemgo; 2013."},"title":"An FPGA Based Cut-Through Switch Optimized for One-Step PTP and Real-Time Ethernet","status":"public","author":[{"full_name":"Flatt, Holger","id":"58494","last_name":"Flatt","first_name":"Holger"},{"full_name":"Schewe, Frank","first_name":"Frank","last_name":"Schewe"},{"id":"1899","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","first_name":"Jürgen"}],"year":2013,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"user_id":"74222","date_updated":"2023-03-15T13:49:54Z","publication":"at International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication 2013","type":"conference","date_created":"2021-01-28T11:09:52Z","_id":"4644","place":"Lemgo","language":[{"iso":"eng"}]},{"date_updated":"2023-03-15T13:49:54Z","user_id":"74222","date_created":"2021-01-28T11:10:50Z","type":"conference","publication":"International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication (ISPCS 2013)","_id":"4645","language":[{"iso":"eng"}],"place":"Lemgo","citation":{"chicago":"Flatt, Holger, Sebastian Schriegel, and Jürgen Jasperneite. “Reliable Synchronization Accuracy in IEEE 1588 Networks Using Device Qualification with Standard Test Patterns.” In International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication (ISPCS 2013). Lemgo, 2013.","apa":"Flatt, H., Schriegel, S., & Jasperneite, J. (2013). Reliable Synchronization Accuracy in IEEE 1588 Networks Using Device Qualification with Standard Test Patterns. In International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication (ISPCS 2013). Lemgo.","mla":"Flatt, Holger, et al. “Reliable Synchronization Accuracy in IEEE 1588 Networks Using Device Qualification with Standard Test Patterns.” International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication (ISPCS 2013), 2013.","bjps":"Flatt H, Schriegel S and Jasperneite J (2013) Reliable Synchronization Accuracy in IEEE 1588 Networks Using Device Qualification with Standard Test Patterns. International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication (ISPCS 2013). Lemgo.","havard":"H. Flatt, S. Schriegel, J. Jasperneite, Reliable Synchronization Accuracy in IEEE 1588 Networks Using Device Qualification with Standard Test Patterns, in: International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication (ISPCS 2013), Lemgo, 2013.","ufg":"Flatt, Holger et. al. (2013): Reliable Synchronization Accuracy in IEEE 1588 Networks Using Device Qualification with Standard Test Patterns, in: International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication (ISPCS 2013), Lemgo.","van":"Flatt H, Schriegel S, Jasperneite J. Reliable Synchronization Accuracy in IEEE 1588 Networks Using Device Qualification with Standard Test Patterns. In: International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication (ISPCS 2013). Lemgo; 2013.","din1505-2-1":"Flatt, Holger ; Schriegel, Sebastian ; Jasperneite, Jürgen: Reliable Synchronization Accuracy in IEEE 1588 Networks Using Device Qualification with Standard Test Patterns. In: International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication (ISPCS 2013). Lemgo, 2013","chicago-de":"Flatt, Holger, Sebastian Schriegel und Jürgen Jasperneite. 2013. Reliable Synchronization Accuracy in IEEE 1588 Networks Using Device Qualification with Standard Test Patterns. In: International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication (ISPCS 2013). Lemgo.","short":"H. Flatt, S. Schriegel, J. Jasperneite, in: International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication (ISPCS 2013), Lemgo, 2013.","ieee":"H. Flatt, S. Schriegel, and J. Jasperneite, “Reliable Synchronization Accuracy in IEEE 1588 Networks Using Device Qualification with Standard Test Patterns,” in International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication (ISPCS 2013), 2013.","ama":"Flatt H, Schriegel S, Jasperneite J. Reliable Synchronization Accuracy in IEEE 1588 Networks Using Device Qualification with Standard Test Patterns. In: International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication (ISPCS 2013). Lemgo; 2013."},"title":"Reliable Synchronization Accuracy in IEEE 1588 Networks Using Device Qualification with Standard Test Patterns","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2013,"author":[{"first_name":"Holger","full_name":"Flatt, Holger","last_name":"Flatt","id":"58494"},{"full_name":"Schriegel, Sebastian","first_name":"Sebastian","last_name":"Schriegel"},{"first_name":"Jürgen","id":"1899","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite"}]},{"title":"'Node to Node Synchronization Accuracy Requirements of Dynamic Frame Packing","citation":{"chicago-de":"Schumacher, Markus, Lukasz Wisniewski, Sebastian Schriegel und Jürgen Jasperneite. 2013. ’Node to Node Synchronization Accuracy Requirements of Dynamic Frame Packing. In: International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication (ISPCS 2013). Lemgo.","din1505-2-1":"Schumacher, Markus ; Wisniewski, Lukasz ; Schriegel, Sebastian ; Jasperneite, Jürgen: ’Node to Node Synchronization Accuracy Requirements of Dynamic Frame Packing. In: International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication (ISPCS 2013). Lemgo, 2013","short":"M. Schumacher, L. Wisniewski, S. Schriegel, J. Jasperneite, in: International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication (ISPCS 2013), Lemgo, 2013.","ufg":"Schumacher, Markus et. al. (2013): ’Node to Node Synchronization Accuracy Requirements of Dynamic Frame Packing, in: International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication (ISPCS 2013), Lemgo.","havard":"M. Schumacher, L. Wisniewski, S. Schriegel, J. Jasperneite, ’Node to Node Synchronization Accuracy Requirements of Dynamic Frame Packing, in: International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication (ISPCS 2013), Lemgo, 2013.","mla":"Schumacher, Markus, et al. “’Node to Node Synchronization Accuracy Requirements of Dynamic Frame Packing.” International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication (ISPCS 2013), 2013.","bjps":"Schumacher M et al. (2013) ’Node to Node Synchronization Accuracy Requirements of Dynamic Frame Packing. International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication (ISPCS 2013). Lemgo.","van":"Schumacher M, Wisniewski L, Schriegel S, Jasperneite J. ’Node to Node Synchronization Accuracy Requirements of Dynamic Frame Packing. In: International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication (ISPCS 2013). Lemgo; 2013.","chicago":"Schumacher, Markus, Lukasz Wisniewski, Sebastian Schriegel, and Jürgen Jasperneite. “’Node to Node Synchronization Accuracy Requirements of Dynamic Frame Packing.” In International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication (ISPCS 2013). Lemgo, 2013.","apa":"Schumacher, M., Wisniewski, L., Schriegel, S., & Jasperneite, J. (2013). ’Node to Node Synchronization Accuracy Requirements of Dynamic Frame Packing. In International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication (ISPCS 2013). Lemgo.","ama":"Schumacher M, Wisniewski L, Schriegel S, Jasperneite J. ’Node to Node Synchronization Accuracy Requirements of Dynamic Frame Packing. In: International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication (ISPCS 2013). Lemgo; 2013.","ieee":"M. Schumacher, L. Wisniewski, S. Schriegel, and J. Jasperneite, “’Node to Node Synchronization Accuracy Requirements of Dynamic Frame Packing,” in International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication (ISPCS 2013), 2013."},"year":2013,"author":[{"full_name":"Schumacher, Markus","last_name":"Schumacher","first_name":"Markus"},{"full_name":"Wisniewski, Lukasz","first_name":"Lukasz","id":"1710","last_name":"Wisniewski"},{"last_name":"Schriegel","first_name":"Sebastian","full_name":"Schriegel, Sebastian"},{"first_name":"Jürgen","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","id":"1899"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public","publication":"International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication (ISPCS 2013)","type":"conference","date_created":"2021-01-28T11:11:45Z","user_id":"74222","date_updated":"2023-03-15T13:49:54Z","_id":"4646","place":"Lemgo","language":[{"iso":"eng"}]},{"citation":{"van":"Trsek H, Jasperneite J. Cloud Computing for Industrial Automation Systems - A Comprehensive Overview. In: 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy; 2013.","ama":"Trsek H, Jasperneite J. Cloud Computing for Industrial Automation Systems - A Comprehensive Overview. In: 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy; 2013.","ufg":"Trsek, Henning/Jasperneite, Jürgen (2013): Cloud Computing for Industrial Automation Systems - A Comprehensive Overview, in: 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Cagliari, Italy.","mla":"Trsek, Henning, and Jürgen Jasperneite. “Cloud Computing for Industrial Automation Systems - A Comprehensive Overview.” 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2013.","bjps":"Trsek H and Jasperneite J (2013) Cloud Computing for Industrial Automation Systems - A Comprehensive Overview. 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy.","havard":"H. Trsek, J. Jasperneite, Cloud Computing for Industrial Automation Systems - A Comprehensive Overview, in: 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Cagliari, Italy, 2013.","apa":"Trsek, H., & Jasperneite, J. (2013). Cloud Computing for Industrial Automation Systems - A Comprehensive Overview. In 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy.","ieee":"H. Trsek and J. Jasperneite, “Cloud Computing for Industrial Automation Systems - A Comprehensive Overview,” in 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2013.","chicago":"Trsek, Henning, and Jürgen Jasperneite. “Cloud Computing for Industrial Automation Systems - A Comprehensive Overview.” In 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy, 2013.","short":"H. Trsek, J. Jasperneite, in: 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Cagliari, Italy, 2013.","chicago-de":"Trsek, Henning und Jürgen Jasperneite. 2013. Cloud Computing for Industrial Automation Systems - A Comprehensive Overview. In: 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy.","din1505-2-1":"Trsek, Henning ; Jasperneite, Jürgen: Cloud Computing for Industrial Automation Systems - A Comprehensive Overview. In: 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy, 2013"},"title":"Cloud Computing for Industrial Automation Systems - A Comprehensive Overview","status":"public","year":2013,"author":[{"first_name":"Henning","id":"1486","full_name":"Trsek, Henning","last_name":"Trsek"},{"first_name":"Jürgen","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","id":"1899"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"user_id":"74222","date_updated":"2023-03-15T13:49:54Z","publication":"18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)","type":"conference","date_created":"2021-01-28T11:12:33Z","place":"Cagliari, Italy","language":[{"iso":"eng"}],"_id":"4647"},{"status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2013,"author":[{"first_name":"Henning","full_name":"Trsek, Henning","last_name":"Trsek","id":"1486"},{"last_name":"Tack","first_name":"Tim","full_name":"Tack, Tim"},{"id":"1899","first_name":"Jürgen","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen"},{"last_name":"Nett","first_name":"Edgar","full_name":"Nett, Edgar"}],"citation":{"chicago-de":"Trsek, Henning, Tim Tack, Jürgen Jasperneite und Edgar Nett. 2013. Towards an Isochronous Wireless Communication System for Industrial Automation. In: 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy.","din1505-2-1":"Trsek, Henning ; Tack, Tim ; Jasperneite, Jürgen ; Nett, Edgar: Towards an Isochronous Wireless Communication System for Industrial Automation. In: 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy, 2013","short":"H. Trsek, T. Tack, J. Jasperneite, E. Nett, in: 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Cagliari, Italy, 2013.","mla":"Trsek, Henning, et al. “Towards an Isochronous Wireless Communication System for Industrial Automation.” 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2013.","bjps":"Trsek H et al. (2013) Towards an Isochronous Wireless Communication System for Industrial Automation. 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy.","havard":"H. Trsek, T. Tack, J. Jasperneite, E. Nett, Towards an Isochronous Wireless Communication System for Industrial Automation, in: 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Cagliari, Italy, 2013.","ufg":"Trsek, Henning et. al. (2013): Towards an Isochronous Wireless Communication System for Industrial Automation, in: 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Cagliari, Italy.","ama":"Trsek H, Tack T, Jasperneite J, Nett E. Towards an Isochronous Wireless Communication System for Industrial Automation. In: 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy; 2013.","van":"Trsek H, Tack T, Jasperneite J, Nett E. Towards an Isochronous Wireless Communication System for Industrial Automation. In: 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy; 2013.","chicago":"Trsek, Henning, Tim Tack, Jürgen Jasperneite, and Edgar Nett. “Towards an Isochronous Wireless Communication System for Industrial Automation.” In 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy, 2013.","ieee":"H. Trsek, T. Tack, J. Jasperneite, and E. Nett, “Towards an Isochronous Wireless Communication System for Industrial Automation,” in 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2013.","apa":"Trsek, H., Tack, T., Jasperneite, J., & Nett, E. (2013). Towards an Isochronous Wireless Communication System for Industrial Automation. In 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy."},"title":"Towards an Isochronous Wireless Communication System for Industrial Automation","language":[{"iso":"eng"}],"place":"Cagliari, Italy","_id":"4648","date_updated":"2023-03-15T13:49:54Z","user_id":"74222","date_created":"2021-01-28T11:13:14Z","type":"conference","publication":"18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)"},{"user_id":"74222","date_updated":"2023-03-15T13:49:54Z","publication":"18th IEEE IEEE International Conference on Emerging Technologies and Factory Automation (best WIP paper award)","type":"conference","date_created":"2021-01-28T11:14:03Z","place":"Cagliari, Italy","language":[{"iso":"eng"}],"_id":"4649","citation":{"ama":"Shrestha GM, Imtiaz J, Jasperneite J. An Optimized OPC-UA Transport Profile to Bringing Bluetooth Low Energy Device into IP Networks. In: 18th IEEE IEEE International Conference on Emerging Technologies and Factory Automation (Best WIP Paper Award). Cagliari, Italy; 2013.","ieee":"G. M. Shrestha, J. Imtiaz, and J. Jasperneite, “An Optimized OPC-UA Transport Profile to Bringing Bluetooth Low Energy Device into IP Networks,” in 18th IEEE IEEE International Conference on Emerging Technologies and Factory Automation (best WIP paper award), 2013.","din1505-2-1":"Shrestha, Ganesh Man ; Imtiaz, Jahanzaib ; Jasperneite, Jürgen: An Optimized OPC-UA Transport Profile to Bringing Bluetooth Low Energy Device into IP Networks. In: 18th IEEE IEEE International Conference on Emerging Technologies and Factory Automation (best WIP paper award). Cagliari, Italy, 2013","chicago-de":"Shrestha, Ganesh Man, Jahanzaib Imtiaz und Jürgen Jasperneite. 2013. An Optimized OPC-UA Transport Profile to Bringing Bluetooth Low Energy Device into IP Networks. In: 18th IEEE IEEE International Conference on Emerging Technologies and Factory Automation (best WIP paper award). Cagliari, Italy.","short":"G.M. Shrestha, J. Imtiaz, J. Jasperneite, in: 18th IEEE IEEE International Conference on Emerging Technologies and Factory Automation (Best WIP Paper Award), Cagliari, Italy, 2013.","bjps":"Shrestha GM, Imtiaz J and Jasperneite J (2013) An Optimized OPC-UA Transport Profile to Bringing Bluetooth Low Energy Device into IP Networks. 18th IEEE IEEE International Conference on Emerging Technologies and Factory Automation (Best WIP Paper Award). Cagliari, Italy.","mla":"Shrestha, Ganesh Man, et al. “An Optimized OPC-UA Transport Profile to Bringing Bluetooth Low Energy Device into IP Networks.” 18th IEEE IEEE International Conference on Emerging Technologies and Factory Automation (Best WIP Paper Award), 2013.","havard":"G.M. Shrestha, J. Imtiaz, J. Jasperneite, An Optimized OPC-UA Transport Profile to Bringing Bluetooth Low Energy Device into IP Networks, in: 18th IEEE IEEE International Conference on Emerging Technologies and Factory Automation (Best WIP Paper Award), Cagliari, Italy, 2013.","ufg":"Shrestha, Ganesh Man et. al. (2013): An Optimized OPC-UA Transport Profile to Bringing Bluetooth Low Energy Device into IP Networks, in: 18th IEEE IEEE International Conference on Emerging Technologies and Factory Automation (best WIP paper award), Cagliari, Italy.","van":"Shrestha GM, Imtiaz J, Jasperneite J. An Optimized OPC-UA Transport Profile to Bringing Bluetooth Low Energy Device into IP Networks. In: 18th IEEE IEEE International Conference on Emerging Technologies and Factory Automation (best WIP paper award). Cagliari, Italy; 2013.","chicago":"Shrestha, Ganesh Man, Jahanzaib Imtiaz, and Jürgen Jasperneite. “An Optimized OPC-UA Transport Profile to Bringing Bluetooth Low Energy Device into IP Networks.” In 18th IEEE IEEE International Conference on Emerging Technologies and Factory Automation (Best WIP Paper Award). Cagliari, Italy, 2013.","apa":"Shrestha, G. M., Imtiaz, J., & Jasperneite, J. (2013). An Optimized OPC-UA Transport Profile to Bringing Bluetooth Low Energy Device into IP Networks. In 18th IEEE IEEE International Conference on Emerging Technologies and Factory Automation (best WIP paper award). Cagliari, Italy."},"title":"An Optimized OPC-UA Transport Profile to Bringing Bluetooth Low Energy Device into IP Networks","status":"public","year":2013,"author":[{"last_name":"Shrestha","first_name":"Ganesh Man","full_name":"Shrestha, Ganesh Man"},{"last_name":"Imtiaz","first_name":"Jahanzaib","full_name":"Imtiaz, Jahanzaib"},{"last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}]},{"citation":{"chicago":"Imtiaz, Jahanzaib, and Jürgen Jasperneite. “Scalability of OPC-UA Down to the Chip Level Enables ‘Internet of Things.’” In 11th International IEEE Conference on Industrial Informatics 2013. Bochum, Germany, 2013.","apa":"Imtiaz, J., & Jasperneite, J. (2013). Scalability of OPC-UA Down to the Chip Level Enables “Internet of Things.” In 11th International IEEE Conference on Industrial Informatics 2013. Bochum, Germany.","mla":"Imtiaz, Jahanzaib, and Jürgen Jasperneite. “Scalability of OPC-UA Down to the Chip Level Enables ‘Internet of Things.’” 11th International IEEE Conference on Industrial Informatics 2013, 2013.","bjps":"Imtiaz J and Jasperneite J (2013) Scalability of OPC-UA Down to the Chip Level Enables ‘Internet of Things’. 11th International IEEE Conference on Industrial Informatics 2013. Bochum, Germany.","havard":"J. Imtiaz, J. Jasperneite, Scalability of OPC-UA Down to the Chip Level Enables “Internet of Things,” in: 11th International IEEE Conference on Industrial Informatics 2013, Bochum, Germany, 2013.","ufg":"Imtiaz, Jahanzaib/Jasperneite, Jürgen (2013): Scalability of OPC-UA Down to the Chip Level Enables „Internet of Things“, in: 11th International IEEE Conference on Industrial Informatics 2013, Bochum, Germany.","van":"Imtiaz J, Jasperneite J. Scalability of OPC-UA Down to the Chip Level Enables “Internet of Things.” In: 11th International IEEE Conference on Industrial Informatics 2013. Bochum, Germany; 2013.","din1505-2-1":"Imtiaz, Jahanzaib ; Jasperneite, Jürgen: Scalability of OPC-UA Down to the Chip Level Enables „Internet of Things“. In: 11th International IEEE Conference on Industrial Informatics 2013. Bochum, Germany, 2013","chicago-de":"Imtiaz, Jahanzaib und Jürgen Jasperneite. 2013. Scalability of OPC-UA Down to the Chip Level Enables „Internet of Things“. In: 11th International IEEE Conference on Industrial Informatics 2013. Bochum, Germany.","short":"J. Imtiaz, J. Jasperneite, in: 11th International IEEE Conference on Industrial Informatics 2013, Bochum, Germany, 2013.","ieee":"J. Imtiaz and J. Jasperneite, “Scalability of OPC-UA Down to the Chip Level Enables ‘Internet of Things,’” in 11th International IEEE Conference on Industrial Informatics 2013, 2013.","ama":"Imtiaz J, Jasperneite J. Scalability of OPC-UA Down to the Chip Level Enables “Internet of Things.” In: 11th International IEEE Conference on Industrial Informatics 2013. Bochum, Germany; 2013."},"title":"Scalability of OPC-UA Down to the Chip Level Enables \"Internet of Things\"","status":"public","author":[{"full_name":"Imtiaz, Jahanzaib","first_name":"Jahanzaib","last_name":"Imtiaz"},{"full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","id":"1899","first_name":"Jürgen"}],"year":2013,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"user_id":"74222","date_updated":"2023-03-15T13:49:54Z","publication":"11th International IEEE Conference on Industrial Informatics 2013","date_created":"2021-01-28T11:14:52Z","type":"conference","place":"Bochum, Germany","language":[{"iso":"eng"}],"_id":"4650"},{"_id":"4651","place":"Bochum, Germany","language":[{"iso":"eng"}],"user_id":"74222","date_updated":"2023-03-15T13:49:54Z","publication":"11th International IEEE Conference on Industrial Informatics","type":"conference","date_created":"2021-01-28T11:25:01Z","status":"public","author":[{"full_name":"Czybik, Björn","id":"76180","last_name":"Czybik","first_name":"Björn"},{"full_name":"Hausmann, Stefan","last_name":"Hausmann","first_name":"Stefan"},{"full_name":"Heiss, Stefan","last_name":"Heiss","id":"1031","first_name":"Stefan"},{"last_name":"Jasperneite","first_name":"Jürgen","id":"1899","full_name":"Jasperneite, Jürgen"}],"year":2013,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"citation":{"chicago":"Czybik, Björn, Stefan Hausmann, Stefan Heiss, and Jürgen Jasperneite. “Performance Evaluation of MAC Algorithms for Real-Time Ethernet Communication Systems.” In 11th International IEEE Conference on Industrial Informatics. Bochum, Germany, 2013.","apa":"Czybik, B., Hausmann, S., Heiss, S., & Jasperneite, J. (2013). Performance Evaluation of MAC Algorithms for Real-Time Ethernet Communication Systems. In 11th International IEEE Conference on Industrial Informatics. Bochum, Germany.","ufg":"Czybik, Björn et. al. (2013): Performance Evaluation of MAC Algorithms for Real-Time Ethernet Communication Systems, in: 11th International IEEE Conference on Industrial Informatics, Bochum, Germany.","bjps":"Czybik B et al. (2013) Performance Evaluation of MAC Algorithms for Real-Time Ethernet Communication Systems. 11th International IEEE Conference on Industrial Informatics. Bochum, Germany.","mla":"Czybik, Björn, et al. “Performance Evaluation of MAC Algorithms for Real-Time Ethernet Communication Systems.” 11th International IEEE Conference on Industrial Informatics, 2013.","havard":"B. Czybik, S. Hausmann, S. Heiss, J. Jasperneite, Performance Evaluation of MAC Algorithms for Real-Time Ethernet Communication Systems, in: 11th International IEEE Conference on Industrial Informatics, Bochum, Germany, 2013.","van":"Czybik B, Hausmann S, Heiss S, Jasperneite J. Performance Evaluation of MAC Algorithms for Real-Time Ethernet Communication Systems. In: 11th International IEEE Conference on Industrial Informatics. Bochum, Germany; 2013.","chicago-de":"Czybik, Björn, Stefan Hausmann, Stefan Heiss und Jürgen Jasperneite. 2013. Performance Evaluation of MAC Algorithms for Real-Time Ethernet Communication Systems. In: 11th International IEEE Conference on Industrial Informatics. Bochum, Germany.","din1505-2-1":"Czybik, Björn ; Hausmann, Stefan ; Heiss, Stefan ; Jasperneite, Jürgen: Performance Evaluation of MAC Algorithms for Real-Time Ethernet Communication Systems. In: 11th International IEEE Conference on Industrial Informatics. Bochum, Germany, 2013","short":"B. Czybik, S. Hausmann, S. Heiss, J. Jasperneite, in: 11th International IEEE Conference on Industrial Informatics, Bochum, Germany, 2013.","ieee":"B. Czybik, S. Hausmann, S. Heiss, and J. Jasperneite, “Performance Evaluation of MAC Algorithms for Real-Time Ethernet Communication Systems,” in 11th International IEEE Conference on Industrial Informatics, 2013.","ama":"Czybik B, Hausmann S, Heiss S, Jasperneite J. Performance Evaluation of MAC Algorithms for Real-Time Ethernet Communication Systems. In: 11th International IEEE Conference on Industrial Informatics. Bochum, Germany; 2013."},"title":"Performance Evaluation of MAC Algorithms for Real-Time Ethernet Communication Systems"},{"language":[{"iso":"eng"}],"place":"Bochum, Germany","_id":"4652","type":"conference","date_created":"2021-01-28T11:27:29Z","publication":"11th International IEEE Conference on Industrial Informatics","date_updated":"2023-03-15T13:49:54Z","user_id":"74222","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2013,"author":[{"full_name":"Dürkop, Lars","first_name":"Lars","last_name":"Dürkop"},{"first_name":"Jahanzaib","full_name":"Imtiaz, Jahanzaib","last_name":"Imtiaz"},{"id":"1486","last_name":"Trsek","full_name":"Trsek, Henning","first_name":"Henning"},{"first_name":"Lukasz","last_name":"Wisniewski","full_name":"Wisniewski, Lukasz","id":"1710"},{"last_name":"Jasperneite","id":"1899","first_name":"Jürgen","full_name":"Jasperneite, Jürgen"}],"status":"public","title":"Using OPC-UA for the Autoconfiguration of Real-time Ethernet Systems ","citation":{"chicago":"Dürkop, Lars, Jahanzaib Imtiaz, Henning Trsek, Lukasz Wisniewski, and Jürgen Jasperneite. “Using OPC-UA for the Autoconfiguration of Real-Time Ethernet Systems .” In 11th International IEEE Conference on Industrial Informatics. Bochum, Germany, 2013.","apa":"Dürkop, L., Imtiaz, J., Trsek, H., Wisniewski, L., & Jasperneite, J. (2013). Using OPC-UA for the Autoconfiguration of Real-time Ethernet Systems . In 11th International IEEE Conference on Industrial Informatics. Bochum, Germany.","ieee":"L. Dürkop, J. Imtiaz, H. Trsek, L. Wisniewski, and J. Jasperneite, “Using OPC-UA for the Autoconfiguration of Real-time Ethernet Systems ,” in 11th International IEEE Conference on Industrial Informatics, 2013.","ufg":"Dürkop, Lars et. al. (2013): Using OPC-UA for the Autoconfiguration of Real-time Ethernet Systems , in: 11th International IEEE Conference on Industrial Informatics, Bochum, Germany.","havard":"L. Dürkop, J. Imtiaz, H. Trsek, L. Wisniewski, J. Jasperneite, Using OPC-UA for the Autoconfiguration of Real-time Ethernet Systems , in: 11th International IEEE Conference on Industrial Informatics, Bochum, Germany, 2013.","bjps":"Dürkop L et al. (2013) Using OPC-UA for the Autoconfiguration of Real-Time Ethernet Systems . 11th International IEEE Conference on Industrial Informatics. Bochum, Germany.","mla":"Dürkop, Lars, et al. “Using OPC-UA for the Autoconfiguration of Real-Time Ethernet Systems .” 11th International IEEE Conference on Industrial Informatics, 2013.","van":"Dürkop L, Imtiaz J, Trsek H, Wisniewski L, Jasperneite J. Using OPC-UA for the Autoconfiguration of Real-time Ethernet Systems . In: 11th International IEEE Conference on Industrial Informatics. Bochum, Germany; 2013.","ama":"Dürkop L, Imtiaz J, Trsek H, Wisniewski L, Jasperneite J. Using OPC-UA for the Autoconfiguration of Real-time Ethernet Systems . In: 11th International IEEE Conference on Industrial Informatics. Bochum, Germany; 2013.","chicago-de":"Dürkop, Lars, Jahanzaib Imtiaz, Henning Trsek, Lukasz Wisniewski und Jürgen Jasperneite. 2013. Using OPC-UA for the Autoconfiguration of Real-time Ethernet Systems . In: 11th International IEEE Conference on Industrial Informatics. Bochum, Germany.","din1505-2-1":"Dürkop, Lars ; Imtiaz, Jahanzaib ; Trsek, Henning ; Wisniewski, Lukasz ; Jasperneite, Jürgen: Using OPC-UA for the Autoconfiguration of Real-time Ethernet Systems . In: 11th International IEEE Conference on Industrial Informatics. Bochum, Germany, 2013","short":"L. Dürkop, J. Imtiaz, H. Trsek, L. Wisniewski, J. Jasperneite, in: 11th International IEEE Conference on Industrial Informatics, Bochum, Germany, 2013."}},{"language":[{"iso":"eng"}],"place":"Samos, Greece","_id":"4653","date_created":"2021-01-28T11:28:21Z","type":"conference","publication":"IEEE International Conference on Embedded Computer Systems: Architectures, Modeling and Simulation (SAMOS XIII), accepted for publication","date_updated":"2023-03-15T13:49:54Z","user_id":"74222","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2013,"author":[{"full_name":"Flatt, Holger","first_name":"Holger","id":"58494","last_name":"Flatt"},{"full_name":"Jasperneite, Jürgen","id":"1899","first_name":"Jürgen","last_name":"Jasperneite"},{"last_name":"Dennstedt","first_name":"Daniel","full_name":"Dennstedt, Daniel"},{"last_name":"Hung ","first_name":"Tran Dinh","full_name":"Hung , Tran Dinh"}],"abstract":[{"lang":"eng","text":"lt;noscriptgt;lt;/noscriptgt;lt;noscriptgt;lt;/noscriptgt;"}],"status":"public","title":"Mapping of PRP/HSR Redundancy Protocols onto a Configurable FPGA/CPU Based Architecture","citation":{"chicago":"Flatt, Holger, Jürgen Jasperneite, Daniel Dennstedt, and Tran Dinh Hung . “Mapping of PRP/HSR Redundancy Protocols onto a Configurable FPGA/CPU Based Architecture.” In IEEE International Conference on Embedded Computer Systems: Architectures, Modeling and Simulation (SAMOS XIII), Accepted for Publication. Samos, Greece, 2013.","apa":"Flatt, H., Jasperneite, J., Dennstedt, D., & Hung , T. D. (2013). Mapping of PRP/HSR Redundancy Protocols onto a Configurable FPGA/CPU Based Architecture. In IEEE International Conference on Embedded Computer Systems: Architectures, Modeling and Simulation (SAMOS XIII), accepted for publication. Samos, Greece.","ieee":"H. Flatt, J. Jasperneite, D. Dennstedt, and T. D. Hung , “Mapping of PRP/HSR Redundancy Protocols onto a Configurable FPGA/CPU Based Architecture,” in IEEE International Conference on Embedded Computer Systems: Architectures, Modeling and Simulation (SAMOS XIII), accepted for publication, 2013.","ufg":"Flatt, Holger et. al. (2013): Mapping of PRP/HSR Redundancy Protocols onto a Configurable FPGA/CPU Based Architecture, in: IEEE International Conference on Embedded Computer Systems: Architectures, Modeling and Simulation (SAMOS XIII), accepted for publication, Samos, Greece.","havard":"H. Flatt, J. Jasperneite, D. Dennstedt, T.D. Hung , Mapping of PRP/HSR Redundancy Protocols onto a Configurable FPGA/CPU Based Architecture, in: IEEE International Conference on Embedded Computer Systems: Architectures, Modeling and Simulation (SAMOS XIII), Accepted for Publication, Samos, Greece, 2013.","bjps":"Flatt H et al. (2013) Mapping of PRP/HSR Redundancy Protocols onto a Configurable FPGA/CPU Based Architecture. IEEE International Conference on Embedded Computer Systems: Architectures, Modeling and Simulation (SAMOS XIII), Accepted for Publication. Samos, Greece.","mla":"Flatt, Holger, et al. “Mapping of PRP/HSR Redundancy Protocols onto a Configurable FPGA/CPU Based Architecture.” IEEE International Conference on Embedded Computer Systems: Architectures, Modeling and Simulation (SAMOS XIII), Accepted for Publication, 2013.","van":"Flatt H, Jasperneite J, Dennstedt D, Hung TD. Mapping of PRP/HSR Redundancy Protocols onto a Configurable FPGA/CPU Based Architecture. In: IEEE International Conference on Embedded Computer Systems: Architectures, Modeling and Simulation (SAMOS XIII), accepted for publication. Samos, Greece; 2013.","ama":"Flatt H, Jasperneite J, Dennstedt D, Hung TD. Mapping of PRP/HSR Redundancy Protocols onto a Configurable FPGA/CPU Based Architecture. In: IEEE International Conference on Embedded Computer Systems: Architectures, Modeling and Simulation (SAMOS XIII), Accepted for Publication. Samos, Greece; 2013.","chicago-de":"Flatt, Holger, Jürgen Jasperneite, Daniel Dennstedt und Tran Dinh Hung . 2013. Mapping of PRP/HSR Redundancy Protocols onto a Configurable FPGA/CPU Based Architecture. In: IEEE International Conference on Embedded Computer Systems: Architectures, Modeling and Simulation (SAMOS XIII), accepted for publication. Samos, Greece.","din1505-2-1":"Flatt, Holger ; Jasperneite, Jürgen ; Dennstedt, Daniel ; Hung , Tran Dinh: Mapping of PRP/HSR Redundancy Protocols onto a Configurable FPGA/CPU Based Architecture. In: IEEE International Conference on Embedded Computer Systems: Architectures, Modeling and Simulation (SAMOS XIII), accepted for publication. Samos, Greece, 2013","short":"H. Flatt, J. Jasperneite, D. Dennstedt, T.D. Hung , in: IEEE International Conference on Embedded Computer Systems: Architectures, Modeling and Simulation (SAMOS XIII), Accepted for Publication, Samos, Greece, 2013."}},{"_id":"4654","place":"Herzogenrath","language":[{"iso":"eng"}],"publication":"Bitkom Akademie Workshop \"Auf dem Weg zum Internet der Dinge\" (Vortrag)","type":"conference","date_created":"2021-01-28T11:29:14Z","user_id":"74222","date_updated":"2023-03-15T13:49:54Z","year":2013,"author":[{"first_name":"Jürgen","last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public","title":"Smart Factories, CPS und Industrie 4.0","citation":{"ieee":"J. Jasperneite, “Smart Factories, CPS und Industrie 4.0,” in Bitkom Akademie Workshop “Auf dem Weg zum Internet der Dinge” (Vortrag), 2013.","ama":"Jasperneite J. Smart Factories, CPS und Industrie 4.0. In: Bitkom Akademie Workshop “Auf Dem Weg Zum Internet Der Dinge” (Vortrag). Herzogenrath; 2013.","chicago":"Jasperneite, Jürgen. “Smart Factories, CPS Und Industrie 4.0.” In Bitkom Akademie Workshop “Auf Dem Weg Zum Internet Der Dinge” (Vortrag). Herzogenrath, 2013.","apa":"Jasperneite, J. (2013). Smart Factories, CPS und Industrie 4.0. In Bitkom Akademie Workshop “Auf dem Weg zum Internet der Dinge” (Vortrag). Herzogenrath.","ufg":"Jasperneite, Jürgen (2013): Smart Factories, CPS und Industrie 4.0, in: Bitkom Akademie Workshop „Auf dem Weg zum Internet der Dinge“ (Vortrag), Herzogenrath.","mla":"Jasperneite, Jürgen. “Smart Factories, CPS Und Industrie 4.0.” Bitkom Akademie Workshop “Auf Dem Weg Zum Internet Der Dinge” (Vortrag), 2013.","bjps":"Jasperneite J (2013) Smart Factories, CPS Und Industrie 4.0. Bitkom Akademie Workshop ‘Auf Dem Weg Zum Internet Der Dinge’ (Vortrag). Herzogenrath.","havard":"J. Jasperneite, Smart Factories, CPS und Industrie 4.0, in: Bitkom Akademie Workshop “Auf Dem Weg Zum Internet Der Dinge” (Vortrag), Herzogenrath, 2013.","van":"Jasperneite J. Smart Factories, CPS und Industrie 4.0. In: Bitkom Akademie Workshop “Auf dem Weg zum Internet der Dinge” (Vortrag). Herzogenrath; 2013.","din1505-2-1":"Jasperneite, Jürgen: Smart Factories, CPS und Industrie 4.0. In: Bitkom Akademie Workshop „Auf dem Weg zum Internet der Dinge“ (Vortrag). Herzogenrath, 2013","chicago-de":"Jasperneite, Jürgen. 2013. Smart Factories, CPS und Industrie 4.0. In: Bitkom Akademie Workshop „Auf dem Weg zum Internet der Dinge“ (Vortrag). Herzogenrath.","short":"J. Jasperneite, in: Bitkom Akademie Workshop “Auf Dem Weg Zum Internet Der Dinge” (Vortrag), Herzogenrath, 2013."}},{"status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"first_name":"Jürgen","id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen"}],"year":2013,"citation":{"apa":"Jasperneite, J. (2013). Industrie 4.0: Alter Wein in neuen Schläuchen? In Sick Automobiltage 2013 (Keynote-Vortrag). Waldkirch.","chicago":"Jasperneite, Jürgen. “Industrie 4.0: Alter Wein in Neuen Schläuchen?” In Sick Automobiltage 2013 (Keynote-Vortrag). Waldkirch, 2013.","van":"Jasperneite J. Industrie 4.0: Alter Wein in neuen Schläuchen? In: Sick Automobiltage 2013 (Keynote-Vortrag). Waldkirch; 2013.","ufg":"Jasperneite, Jürgen (2013): Industrie 4.0: Alter Wein in neuen Schläuchen?, in: Sick Automobiltage 2013 (Keynote-Vortrag), Waldkirch.","mla":"Jasperneite, Jürgen. “Industrie 4.0: Alter Wein in Neuen Schläuchen?” Sick Automobiltage 2013 (Keynote-Vortrag), 2013.","bjps":"Jasperneite J (2013) Industrie 4.0: Alter Wein in Neuen Schläuchen? Sick Automobiltage 2013 (Keynote-Vortrag). Waldkirch.","havard":"J. Jasperneite, Industrie 4.0: Alter Wein in neuen Schläuchen?, in: Sick Automobiltage 2013 (Keynote-Vortrag), Waldkirch, 2013.","short":"J. Jasperneite, in: Sick Automobiltage 2013 (Keynote-Vortrag), Waldkirch, 2013.","din1505-2-1":"Jasperneite, Jürgen: Industrie 4.0: Alter Wein in neuen Schläuchen? In: Sick Automobiltage 2013 (Keynote-Vortrag). Waldkirch, 2013","chicago-de":"Jasperneite, Jürgen. 2013. Industrie 4.0: Alter Wein in neuen Schläuchen? In: Sick Automobiltage 2013 (Keynote-Vortrag). Waldkirch.","ieee":"J. Jasperneite, “Industrie 4.0: Alter Wein in neuen Schläuchen?,” in Sick Automobiltage 2013 (Keynote-Vortrag), 2013.","ama":"Jasperneite J. Industrie 4.0: Alter Wein in neuen Schläuchen? In: Sick Automobiltage 2013 (Keynote-Vortrag). Waldkirch; 2013."},"title":"Industrie 4.0: Alter Wein in neuen Schläuchen?","_id":"4655","language":[{"iso":"eng"}],"place":"Waldkirch","date_updated":"2023-03-15T13:49:54Z","user_id":"74222","date_created":"2021-01-28T11:29:50Z","type":"conference","publication":"Sick Automobiltage 2013 (Keynote-Vortrag)"},{"status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2013,"author":[{"first_name":"Markus","full_name":"Schumacher, Markus","last_name":"Schumacher"},{"first_name":"Lukasz","last_name":"Wisniewski","id":"1710","full_name":"Wisniewski, Lukasz"},{"full_name":"Jasperneite, Jürgen","id":"1899","first_name":"Jürgen","last_name":"Jasperneite"},{"first_name":"Sebastian","last_name":"Schriegel","full_name":"Schriegel, Sebastian"}],"citation":{"ieee":"M. Schumacher, L. Wisniewski, J. Jasperneite, and S. Schriegel, “Echtzeit-Ethernet im Gigabit-Zeitalter,” in VDI Kongress AUTOMATION 2013, 2013.","ama":"Schumacher M, Wisniewski L, Jasperneite J, Schriegel S. Echtzeit-Ethernet im Gigabit-Zeitalter. In: VDI Kongress AUTOMATION 2013. Baden-Baden; 2013.","chicago-de":"Schumacher, Markus, Lukasz Wisniewski, Jürgen Jasperneite und Sebastian Schriegel. 2013. Echtzeit-Ethernet im Gigabit-Zeitalter. In: VDI Kongress AUTOMATION 2013. Baden-Baden.","din1505-2-1":"Schumacher, Markus ; Wisniewski, Lukasz ; Jasperneite, Jürgen ; Schriegel, Sebastian: Echtzeit-Ethernet im Gigabit-Zeitalter. In: VDI Kongress AUTOMATION 2013. Baden-Baden, 2013","short":"M. Schumacher, L. Wisniewski, J. Jasperneite, S. Schriegel, in: VDI Kongress AUTOMATION 2013, Baden-Baden, 2013.","chicago":"Schumacher, Markus, Lukasz Wisniewski, Jürgen Jasperneite, and Sebastian Schriegel. “Echtzeit-Ethernet Im Gigabit-Zeitalter.” In VDI Kongress AUTOMATION 2013. Baden-Baden, 2013.","apa":"Schumacher, M., Wisniewski, L., Jasperneite, J., & Schriegel, S. (2013). Echtzeit-Ethernet im Gigabit-Zeitalter. In VDI Kongress AUTOMATION 2013. Baden-Baden.","havard":"M. Schumacher, L. Wisniewski, J. Jasperneite, S. Schriegel, Echtzeit-Ethernet im Gigabit-Zeitalter, in: VDI Kongress AUTOMATION 2013, Baden-Baden, 2013.","bjps":"Schumacher M et al. (2013) Echtzeit-Ethernet Im Gigabit-Zeitalter. VDI Kongress AUTOMATION 2013. Baden-Baden.","mla":"Schumacher, Markus, et al. “Echtzeit-Ethernet Im Gigabit-Zeitalter.” VDI Kongress AUTOMATION 2013, 2013.","ufg":"Schumacher, Markus et. al. (2013): Echtzeit-Ethernet im Gigabit-Zeitalter, in: VDI Kongress AUTOMATION 2013, Baden-Baden.","van":"Schumacher M, Wisniewski L, Jasperneite J, Schriegel S. Echtzeit-Ethernet im Gigabit-Zeitalter. In: VDI Kongress AUTOMATION 2013. Baden-Baden; 2013."},"title":"Echtzeit-Ethernet im Gigabit-Zeitalter","_id":"4656","language":[{"iso":"eng"}],"place":"Baden-Baden","date_updated":"2023-03-15T13:49:54Z","user_id":"74222","date_created":"2021-01-28T11:30:41Z","type":"conference","publication":"VDI Kongress AUTOMATION 2013"},{"title":"OPC UA as an Enabler for Internet of Things","citation":{"ieee":"J. Jasperneite and J. Imtiaz, “OPC UA as an Enabler for Internet of Things,” in OPC Europe Day 2013, 2013.","ama":"Jasperneite J, Imtiaz J. OPC UA as an Enabler for Internet of Things. In: OPC Europe Day 2013. Amersfoort, Netherland; 2013.","apa":"Jasperneite, J., & Imtiaz, J. (2013). OPC UA as an Enabler for Internet of Things. In OPC Europe Day 2013. Amersfoort, Netherland.","chicago":"Jasperneite, Jürgen, and Jahanzaib Imtiaz. “OPC UA as an Enabler for Internet of Things.” In OPC Europe Day 2013. Amersfoort, Netherland, 2013.","van":"Jasperneite J, Imtiaz J. OPC UA as an Enabler for Internet of Things. In: OPC Europe Day 2013. Amersfoort, Netherland; 2013.","bjps":"Jasperneite J and Imtiaz J (2013) OPC UA as an Enabler for Internet of Things. OPC Europe Day 2013. Amersfoort, Netherland.","havard":"J. Jasperneite, J. Imtiaz, OPC UA as an Enabler for Internet of Things, in: OPC Europe Day 2013, Amersfoort, Netherland, 2013.","mla":"Jasperneite, Jürgen, and Jahanzaib Imtiaz. “OPC UA as an Enabler for Internet of Things.” OPC Europe Day 2013, 2013.","ufg":"Jasperneite, Jürgen/Imtiaz, Jahanzaib (2013): OPC UA as an Enabler for Internet of Things, in: OPC Europe Day 2013, Amersfoort, Netherland.","short":"J. Jasperneite, J. Imtiaz, in: OPC Europe Day 2013, Amersfoort, Netherland, 2013.","chicago-de":"Jasperneite, Jürgen und Jahanzaib Imtiaz. 2013. OPC UA as an Enabler for Internet of Things. In: OPC Europe Day 2013. Amersfoort, Netherland.","din1505-2-1":"Jasperneite, Jürgen ; Imtiaz, Jahanzaib: OPC UA as an Enabler for Internet of Things. In: OPC Europe Day 2013. Amersfoort, Netherland, 2013"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2013,"author":[{"first_name":"Jürgen","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","id":"1899"},{"full_name":"Imtiaz, Jahanzaib","last_name":"Imtiaz","first_name":"Jahanzaib"}],"status":"public","type":"conference","date_created":"2021-01-28T11:32:26Z","publication":"OPC Europe Day 2013","date_updated":"2023-03-15T13:49:54Z","user_id":"74222","_id":"4658","language":[{"iso":"eng"}],"place":"Amersfoort, Netherland"},{"citation":{"ieee":"B. Czybik, S. Hausmann, S. Heiss, and J. Jasperneite, “Performance Evaluation of MAC Algorithms for Real-Time Ethernet Communication Systems,” in 11th International IEEE Conference on Industrial Informatics, 2013.","ama":"Czybik B, Hausmann S, Heiss S, Jasperneite J. Performance Evaluation of MAC Algorithms for Real-Time Ethernet Communication Systems. In: 11th International IEEE Conference on Industrial Informatics. Bochum, Germany; 2013.","apa":"Czybik, B., Hausmann, S., Heiss, S., & Jasperneite, J. (2013). Performance Evaluation of MAC Algorithms for Real-Time Ethernet Communication Systems. In 11th International IEEE Conference on Industrial Informatics. Bochum, Germany.","chicago":"Czybik, Björn, Stefan Hausmann, Stefan Heiss, and Jürgen Jasperneite. “Performance Evaluation of MAC Algorithms for Real-Time Ethernet Communication Systems.” In 11th International IEEE Conference on Industrial Informatics. Bochum, Germany, 2013.","van":"Czybik B, Hausmann S, Heiss S, Jasperneite J. Performance Evaluation of MAC Algorithms for Real-Time Ethernet Communication Systems. In: 11th International IEEE Conference on Industrial Informatics. Bochum, Germany; 2013.","bjps":"Czybik B et al. (2013) Performance Evaluation of MAC Algorithms for Real-Time Ethernet Communication Systems. 11th International IEEE Conference on Industrial Informatics. Bochum, Germany.","mla":"Czybik, Björn, et al. “Performance Evaluation of MAC Algorithms for Real-Time Ethernet Communication Systems.” 11th International IEEE Conference on Industrial Informatics, 2013.","havard":"B. Czybik, S. Hausmann, S. Heiss, J. Jasperneite, Performance Evaluation of MAC Algorithms for Real-Time Ethernet Communication Systems, in: 11th International IEEE Conference on Industrial Informatics, Bochum, Germany, 2013.","ufg":"Czybik, Björn et. al. (2013): Performance Evaluation of MAC Algorithms for Real-Time Ethernet Communication Systems, in: 11th International IEEE Conference on Industrial Informatics, Bochum, Germany.","short":"B. Czybik, S. Hausmann, S. Heiss, J. Jasperneite, in: 11th International IEEE Conference on Industrial Informatics, Bochum, Germany, 2013.","chicago-de":"Czybik, Björn, Stefan Hausmann, Stefan Heiss und Jürgen Jasperneite. 2013. Performance Evaluation of MAC Algorithms for Real-Time Ethernet Communication Systems. In: 11th International IEEE Conference on Industrial Informatics. Bochum, Germany.","din1505-2-1":"Czybik, Björn ; Hausmann, Stefan ; Heiss, Stefan ; Jasperneite, Jürgen: Performance Evaluation of MAC Algorithms for Real-Time Ethernet Communication Systems. In: 11th International IEEE Conference on Industrial Informatics. Bochum, Germany, 2013"},"title":"Performance Evaluation of MAC Algorithms for Real-Time Ethernet Communication Systems","status":"public","author":[{"id":"76180","last_name":"Czybik","first_name":"Björn","full_name":"Czybik, Björn"},{"full_name":"Hausmann, Stefan","first_name":"Stefan","last_name":"Hausmann"},{"full_name":"Heiss, Stefan","first_name":"Stefan","id":"1031","last_name":"Heiss"},{"first_name":"Jürgen","last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen"}],"year":2013,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"user_id":"74222","date_updated":"2023-03-15T13:49:54Z","publication":"11th International IEEE Conference on Industrial Informatics","date_created":"2021-01-28T11:34:04Z","type":"conference","_id":"4659","place":"Bochum, Germany","language":[{"iso":"eng"}]},{"publication":"11th International IEEE Conference on Industrial Informatics","type":"conference","date_created":"2021-01-28T11:35:26Z","user_id":"74222","date_updated":"2023-03-15T13:49:54Z","place":"Bochum, Germany","language":[{"iso":"eng"}],"_id":"4660","title":"Using OPC-UA for the Autoconfiguration of Real-time Ethernet Systems ","citation":{"ieee":"L. Dürkop, J. Imtiaz, H. Trsek, L. Wisniewski, and J. Jasperneite, “Using OPC-UA for the Autoconfiguration of Real-time Ethernet Systems ,” in 11th International IEEE Conference on Industrial Informatics, 2013.","ama":"Dürkop L, Imtiaz J, Trsek H, Wisniewski L, Jasperneite J. Using OPC-UA for the Autoconfiguration of Real-time Ethernet Systems . In: 11th International IEEE Conference on Industrial Informatics. Bochum, Germany; 2013.","apa":"Dürkop, L., Imtiaz, J., Trsek, H., Wisniewski, L., & Jasperneite, J. (2013). Using OPC-UA for the Autoconfiguration of Real-time Ethernet Systems . In 11th International IEEE Conference on Industrial Informatics. Bochum, Germany.","chicago":"Dürkop, Lars, Jahanzaib Imtiaz, Henning Trsek, Lukasz Wisniewski, and Jürgen Jasperneite. “Using OPC-UA for the Autoconfiguration of Real-Time Ethernet Systems .” In 11th International IEEE Conference on Industrial Informatics. Bochum, Germany, 2013.","van":"Dürkop L, Imtiaz J, Trsek H, Wisniewski L, Jasperneite J. Using OPC-UA for the Autoconfiguration of Real-time Ethernet Systems . In: 11th International IEEE Conference on Industrial Informatics. Bochum, Germany; 2013.","ufg":"Dürkop, Lars et. al. (2013): Using OPC-UA for the Autoconfiguration of Real-time Ethernet Systems , in: 11th International IEEE Conference on Industrial Informatics, Bochum, Germany.","mla":"Dürkop, Lars, et al. “Using OPC-UA for the Autoconfiguration of Real-Time Ethernet Systems .” 11th International IEEE Conference on Industrial Informatics, 2013.","bjps":"Dürkop L et al. (2013) Using OPC-UA for the Autoconfiguration of Real-Time Ethernet Systems . 11th International IEEE Conference on Industrial Informatics. Bochum, Germany.","havard":"L. Dürkop, J. Imtiaz, H. Trsek, L. Wisniewski, J. Jasperneite, Using OPC-UA for the Autoconfiguration of Real-time Ethernet Systems , in: 11th International IEEE Conference on Industrial Informatics, Bochum, Germany, 2013.","short":"L. Dürkop, J. Imtiaz, H. Trsek, L. Wisniewski, J. Jasperneite, in: 11th International IEEE Conference on Industrial Informatics, Bochum, Germany, 2013.","din1505-2-1":"Dürkop, Lars ; Imtiaz, Jahanzaib ; Trsek, Henning ; Wisniewski, Lukasz ; Jasperneite, Jürgen: Using OPC-UA for the Autoconfiguration of Real-time Ethernet Systems . In: 11th International IEEE Conference on Industrial Informatics. Bochum, Germany, 2013","chicago-de":"Dürkop, Lars, Jahanzaib Imtiaz, Henning Trsek, Lukasz Wisniewski und Jürgen Jasperneite. 2013. Using OPC-UA for the Autoconfiguration of Real-time Ethernet Systems . In: 11th International IEEE Conference on Industrial Informatics. Bochum, Germany."},"year":2013,"author":[{"first_name":"Lars","last_name":"Dürkop","full_name":"Dürkop, Lars"},{"first_name":"Jahanzaib","full_name":"Imtiaz, Jahanzaib","last_name":"Imtiaz"},{"first_name":"Henning","id":"1486","last_name":"Trsek","full_name":"Trsek, Henning"},{"full_name":"Wisniewski, Lukasz","first_name":"Lukasz","last_name":"Wisniewski","id":"1710"},{"first_name":"Jürgen","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","id":"1899"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public"},{"status":"public","year":2013,"author":[{"full_name":"Flatt, Holger","first_name":"Holger","last_name":"Flatt","id":"58494"},{"full_name":"Jasperneite, Jürgen","id":"1899","last_name":"Jasperneite","first_name":"Jürgen"},{"first_name":"Daniel","last_name":"Dennstedt","full_name":"Dennstedt, Daniel"},{"full_name":"Hung , Tran Dinh","last_name":"Hung ","first_name":"Tran Dinh"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"abstract":[{"text":"lt;noscriptgt;lt;/noscriptgt;lt;noscriptgt;lt;/noscriptgt;","lang":"eng"}],"citation":{"ama":"Flatt H, Jasperneite J, Dennstedt D, Hung TD. Mapping of PRP/HSR Redundancy Protocols onto a Configurable FPGA/CPU Based Architecture. In: IEEE International Conference on Embedded Computer Systems: Architectures, Modeling and Simulation (SAMOS XIII), Accepted for Publication. Samos, Greece; 2013.","ieee":"H. Flatt, J. Jasperneite, D. Dennstedt, and T. D. Hung , “Mapping of PRP/HSR Redundancy Protocols onto a Configurable FPGA/CPU Based Architecture,” in IEEE International Conference on Embedded Computer Systems: Architectures, Modeling and Simulation (SAMOS XIII), accepted for publication, 2013.","van":"Flatt H, Jasperneite J, Dennstedt D, Hung TD. Mapping of PRP/HSR Redundancy Protocols onto a Configurable FPGA/CPU Based Architecture. In: IEEE International Conference on Embedded Computer Systems: Architectures, Modeling and Simulation (SAMOS XIII), accepted for publication. Samos, Greece; 2013.","ufg":"Flatt, Holger et. al. (2013): Mapping of PRP/HSR Redundancy Protocols onto a Configurable FPGA/CPU Based Architecture, in: IEEE International Conference on Embedded Computer Systems: Architectures, Modeling and Simulation (SAMOS XIII), accepted for publication, Samos, Greece.","havard":"H. Flatt, J. Jasperneite, D. Dennstedt, T.D. Hung , Mapping of PRP/HSR Redundancy Protocols onto a Configurable FPGA/CPU Based Architecture, in: IEEE International Conference on Embedded Computer Systems: Architectures, Modeling and Simulation (SAMOS XIII), Accepted for Publication, Samos, Greece, 2013.","mla":"Flatt, Holger, et al. “Mapping of PRP/HSR Redundancy Protocols onto a Configurable FPGA/CPU Based Architecture.” IEEE International Conference on Embedded Computer Systems: Architectures, Modeling and Simulation (SAMOS XIII), Accepted for Publication, 2013.","bjps":"Flatt H et al. (2013) Mapping of PRP/HSR Redundancy Protocols onto a Configurable FPGA/CPU Based Architecture. IEEE International Conference on Embedded Computer Systems: Architectures, Modeling and Simulation (SAMOS XIII), Accepted for Publication. Samos, Greece.","apa":"Flatt, H., Jasperneite, J., Dennstedt, D., & Hung , T. D. (2013). Mapping of PRP/HSR Redundancy Protocols onto a Configurable FPGA/CPU Based Architecture. In IEEE International Conference on Embedded Computer Systems: Architectures, Modeling and Simulation (SAMOS XIII), accepted for publication. Samos, Greece.","chicago":"Flatt, Holger, Jürgen Jasperneite, Daniel Dennstedt, and Tran Dinh Hung . “Mapping of PRP/HSR Redundancy Protocols onto a Configurable FPGA/CPU Based Architecture.” In IEEE International Conference on Embedded Computer Systems: Architectures, Modeling and Simulation (SAMOS XIII), Accepted for Publication. Samos, Greece, 2013.","short":"H. Flatt, J. Jasperneite, D. Dennstedt, T.D. Hung , in: IEEE International Conference on Embedded Computer Systems: Architectures, Modeling and Simulation (SAMOS XIII), Accepted for Publication, Samos, Greece, 2013.","chicago-de":"Flatt, Holger, Jürgen Jasperneite, Daniel Dennstedt und Tran Dinh Hung . 2013. Mapping of PRP/HSR Redundancy Protocols onto a Configurable FPGA/CPU Based Architecture. In: IEEE International Conference on Embedded Computer Systems: Architectures, Modeling and Simulation (SAMOS XIII), accepted for publication. Samos, Greece.","din1505-2-1":"Flatt, Holger ; Jasperneite, Jürgen ; Dennstedt, Daniel ; Hung , Tran Dinh: Mapping of PRP/HSR Redundancy Protocols onto a Configurable FPGA/CPU Based Architecture. In: IEEE International Conference on Embedded Computer Systems: Architectures, Modeling and Simulation (SAMOS XIII), accepted for publication. Samos, Greece, 2013"},"title":"Mapping of PRP/HSR Redundancy Protocols onto a Configurable FPGA/CPU Based Architecture","place":"Samos, Greece","language":[{"iso":"eng"}],"_id":"4661","user_id":"74222","date_updated":"2023-03-15T13:49:54Z","publication":"IEEE International Conference on Embedded Computer Systems: Architectures, Modeling and Simulation (SAMOS XIII), accepted for publication","date_created":"2021-01-28T11:36:25Z","type":"conference"},{"status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2013,"author":[{"full_name":"Jasperneite, Jürgen","id":"1899","first_name":"Jürgen","last_name":"Jasperneite"}],"citation":{"ama":"Jasperneite J. Smart Factories, CPS und Industrie 4.0. In: Bitkom Akademie Workshop “Auf Dem Weg Zum Internet Der Dinge” (Vortrag). Herzogenrath; 2013.","ieee":"J. Jasperneite, “Smart Factories, CPS und Industrie 4.0,” in Bitkom Akademie Workshop “Auf dem Weg zum Internet der Dinge” (Vortrag), 2013.","havard":"J. Jasperneite, Smart Factories, CPS und Industrie 4.0, in: Bitkom Akademie Workshop “Auf Dem Weg Zum Internet Der Dinge” (Vortrag), Herzogenrath, 2013.","mla":"Jasperneite, Jürgen. “Smart Factories, CPS Und Industrie 4.0.” Bitkom Akademie Workshop “Auf Dem Weg Zum Internet Der Dinge” (Vortrag), 2013.","bjps":"Jasperneite J (2013) Smart Factories, CPS Und Industrie 4.0. Bitkom Akademie Workshop ‘Auf Dem Weg Zum Internet Der Dinge’ (Vortrag). Herzogenrath.","ufg":"Jasperneite, Jürgen (2013): Smart Factories, CPS und Industrie 4.0, in: Bitkom Akademie Workshop „Auf dem Weg zum Internet der Dinge“ (Vortrag), Herzogenrath.","van":"Jasperneite J. Smart Factories, CPS und Industrie 4.0. In: Bitkom Akademie Workshop “Auf dem Weg zum Internet der Dinge” (Vortrag). Herzogenrath; 2013.","chicago":"Jasperneite, Jürgen. “Smart Factories, CPS Und Industrie 4.0.” In Bitkom Akademie Workshop “Auf Dem Weg Zum Internet Der Dinge” (Vortrag). Herzogenrath, 2013.","apa":"Jasperneite, J. (2013). Smart Factories, CPS und Industrie 4.0. In Bitkom Akademie Workshop “Auf dem Weg zum Internet der Dinge” (Vortrag). Herzogenrath.","chicago-de":"Jasperneite, Jürgen. 2013. Smart Factories, CPS und Industrie 4.0. In: Bitkom Akademie Workshop „Auf dem Weg zum Internet der Dinge“ (Vortrag). Herzogenrath.","din1505-2-1":"Jasperneite, Jürgen: Smart Factories, CPS und Industrie 4.0. In: Bitkom Akademie Workshop „Auf dem Weg zum Internet der Dinge“ (Vortrag). Herzogenrath, 2013","short":"J. Jasperneite, in: Bitkom Akademie Workshop “Auf Dem Weg Zum Internet Der Dinge” (Vortrag), Herzogenrath, 2013."},"title":"Smart Factories, CPS und Industrie 4.0","_id":"4662","language":[{"iso":"eng"}],"place":"Herzogenrath","date_updated":"2023-03-15T13:49:54Z","user_id":"74222","date_created":"2021-01-28T11:37:10Z","type":"conference","publication":"Bitkom Akademie Workshop \"Auf dem Weg zum Internet der Dinge\" (Vortrag)"},{"date_updated":"2023-03-15T13:49:54Z","user_id":"74222","type":"conference","date_created":"2021-01-28T11:39:30Z","publication":"Sick Automobiltage 2013 (Keynote-Vortrag)","language":[{"iso":"eng"}],"place":"Waldkirch","_id":"4663","citation":{"chicago-de":"Jasperneite, Jürgen. 2013. Industrie 4.0: Alter Wein in neuen Schläuchen? In: Sick Automobiltage 2013 (Keynote-Vortrag). Waldkirch.","din1505-2-1":"Jasperneite, Jürgen: Industrie 4.0: Alter Wein in neuen Schläuchen? In: Sick Automobiltage 2013 (Keynote-Vortrag). Waldkirch, 2013","short":"J. Jasperneite, in: Sick Automobiltage 2013 (Keynote-Vortrag), Waldkirch, 2013.","ufg":"Jasperneite, Jürgen (2013): Industrie 4.0: Alter Wein in neuen Schläuchen?, in: Sick Automobiltage 2013 (Keynote-Vortrag), Waldkirch.","mla":"Jasperneite, Jürgen. “Industrie 4.0: Alter Wein in Neuen Schläuchen?” Sick Automobiltage 2013 (Keynote-Vortrag), 2013.","bjps":"Jasperneite J (2013) Industrie 4.0: Alter Wein in Neuen Schläuchen? Sick Automobiltage 2013 (Keynote-Vortrag). Waldkirch.","havard":"J. Jasperneite, Industrie 4.0: Alter Wein in neuen Schläuchen?, in: Sick Automobiltage 2013 (Keynote-Vortrag), Waldkirch, 2013.","van":"Jasperneite J. Industrie 4.0: Alter Wein in neuen Schläuchen? In: Sick Automobiltage 2013 (Keynote-Vortrag). Waldkirch; 2013.","chicago":"Jasperneite, Jürgen. “Industrie 4.0: Alter Wein in Neuen Schläuchen?” In Sick Automobiltage 2013 (Keynote-Vortrag). Waldkirch, 2013.","apa":"Jasperneite, J. (2013). Industrie 4.0: Alter Wein in neuen Schläuchen? In Sick Automobiltage 2013 (Keynote-Vortrag). Waldkirch.","ama":"Jasperneite J. Industrie 4.0: Alter Wein in neuen Schläuchen? In: Sick Automobiltage 2013 (Keynote-Vortrag). Waldkirch; 2013.","ieee":"J. Jasperneite, “Industrie 4.0: Alter Wein in neuen Schläuchen?,” in Sick Automobiltage 2013 (Keynote-Vortrag), 2013."},"title":"Industrie 4.0: Alter Wein in neuen Schläuchen?","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2013,"author":[{"last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","id":"1899","first_name":"Jürgen"}]},{"user_id":"74222","date_updated":"2023-03-15T13:49:54Z","publication":"VDI Kongress AUTOMATION 2013","type":"conference","date_created":"2021-01-28T11:40:13Z","place":"Baden-Baden","language":[{"iso":"eng"}],"_id":"4664","citation":{"chicago":"Schumacher, Markus, Lukasz Wisniewski, Jürgen Jasperneite, and Sebastian Schriegel. “Echtzeit-Ethernet Im Gigabit-Zeitalter.” In VDI Kongress AUTOMATION 2013. Baden-Baden, 2013.","apa":"Schumacher, M., Wisniewski, L., Jasperneite, J., & Schriegel, S. (2013). Echtzeit-Ethernet im Gigabit-Zeitalter. In VDI Kongress AUTOMATION 2013. Baden-Baden.","ieee":"M. Schumacher, L. Wisniewski, J. Jasperneite, and S. Schriegel, “Echtzeit-Ethernet im Gigabit-Zeitalter,” in VDI Kongress AUTOMATION 2013, 2013.","ufg":"Schumacher, Markus et. al. (2013): Echtzeit-Ethernet im Gigabit-Zeitalter, in: VDI Kongress AUTOMATION 2013, Baden-Baden.","mla":"Schumacher, Markus, et al. “Echtzeit-Ethernet Im Gigabit-Zeitalter.” VDI Kongress AUTOMATION 2013, 2013.","havard":"M. Schumacher, L. Wisniewski, J. Jasperneite, S. Schriegel, Echtzeit-Ethernet im Gigabit-Zeitalter, in: VDI Kongress AUTOMATION 2013, Baden-Baden, 2013.","bjps":"Schumacher M et al. (2013) Echtzeit-Ethernet Im Gigabit-Zeitalter. VDI Kongress AUTOMATION 2013. Baden-Baden.","van":"Schumacher M, Wisniewski L, Jasperneite J, Schriegel S. Echtzeit-Ethernet im Gigabit-Zeitalter. In: VDI Kongress AUTOMATION 2013. Baden-Baden; 2013.","ama":"Schumacher M, Wisniewski L, Jasperneite J, Schriegel S. Echtzeit-Ethernet im Gigabit-Zeitalter. In: VDI Kongress AUTOMATION 2013. Baden-Baden; 2013.","din1505-2-1":"Schumacher, Markus ; Wisniewski, Lukasz ; Jasperneite, Jürgen ; Schriegel, Sebastian: Echtzeit-Ethernet im Gigabit-Zeitalter. In: VDI Kongress AUTOMATION 2013. Baden-Baden, 2013","chicago-de":"Schumacher, Markus, Lukasz Wisniewski, Jürgen Jasperneite und Sebastian Schriegel. 2013. Echtzeit-Ethernet im Gigabit-Zeitalter. In: VDI Kongress AUTOMATION 2013. Baden-Baden.","short":"M. Schumacher, L. Wisniewski, J. Jasperneite, S. Schriegel, in: VDI Kongress AUTOMATION 2013, Baden-Baden, 2013."},"title":"Echtzeit-Ethernet im Gigabit-Zeitalter","status":"public","author":[{"last_name":"Schumacher","full_name":"Schumacher, Markus","first_name":"Markus"},{"last_name":"Wisniewski","first_name":"Lukasz","id":"1710","full_name":"Wisniewski, Lukasz"},{"id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen","last_name":"Jasperneite"},{"first_name":"Sebastian","last_name":"Schriegel","full_name":"Schriegel, Sebastian"}],"year":2013,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}]},{"title":"OPC UA as an Enabler for Internet of Things","citation":{"din1505-2-1":"Jasperneite, Jürgen ; Imtiaz, Jahanzaib: OPC UA as an Enabler for Internet of Things. In: OPC Europe Day 2013. Amersfoort, Netherland, 2013","chicago-de":"Jasperneite, Jürgen und Jahanzaib Imtiaz. 2013. OPC UA as an Enabler for Internet of Things. In: OPC Europe Day 2013. Amersfoort, Netherland.","short":"J. Jasperneite, J. Imtiaz, in: OPC Europe Day 2013, Amersfoort, Netherland, 2013.","chicago":"Jasperneite, Jürgen, and Jahanzaib Imtiaz. “OPC UA as an Enabler for Internet of Things.” In OPC Europe Day 2013. Amersfoort, Netherland, 2013.","ieee":"J. Jasperneite and J. Imtiaz, “OPC UA as an Enabler for Internet of Things,” in OPC Europe Day 2013, 2013.","apa":"Jasperneite, J., & Imtiaz, J. (2013). OPC UA as an Enabler for Internet of Things. In OPC Europe Day 2013. Amersfoort, Netherland.","mla":"Jasperneite, Jürgen, and Jahanzaib Imtiaz. “OPC UA as an Enabler for Internet of Things.” OPC Europe Day 2013, 2013.","havard":"J. Jasperneite, J. Imtiaz, OPC UA as an Enabler for Internet of Things, in: OPC Europe Day 2013, Amersfoort, Netherland, 2013.","bjps":"Jasperneite J and Imtiaz J (2013) OPC UA as an Enabler for Internet of Things. OPC Europe Day 2013. Amersfoort, Netherland.","ufg":"Jasperneite, Jürgen/Imtiaz, Jahanzaib (2013): OPC UA as an Enabler for Internet of Things, in: OPC Europe Day 2013, Amersfoort, Netherland.","ama":"Jasperneite J, Imtiaz J. OPC UA as an Enabler for Internet of Things. In: OPC Europe Day 2013. Amersfoort, Netherland; 2013.","van":"Jasperneite J, Imtiaz J. OPC UA as an Enabler for Internet of Things. In: OPC Europe Day 2013. Amersfoort, Netherland; 2013."},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"last_name":"Jasperneite","first_name":"Jürgen","full_name":"Jasperneite, Jürgen","id":"1899"},{"first_name":"Jahanzaib","last_name":"Imtiaz","full_name":"Imtiaz, Jahanzaib"}],"year":2013,"status":"public","type":"conference","date_created":"2021-01-28T11:41:45Z","publication":"OPC Europe Day 2013","date_updated":"2023-03-15T13:49:54Z","user_id":"74222","language":[{"iso":"eng"}],"place":"Amersfoort, Netherland","_id":"4666"},{"_id":"4667","place":"Taipei, Taiwan","language":[{"iso":"eng"}],"publication":"The 22nd IEEE International Symposium on Industrial Electronics (ISIE2013)","date_created":"2021-01-28T11:42:36Z","type":"conference","user_id":"74222","date_updated":"2023-03-15T13:49:54Z","author":[{"full_name":"Wisniewski, Lukasz","last_name":"Wisniewski","id":"1710","first_name":"Lukasz"},{"first_name":"Jürgen","full_name":"Jasperneite, Jürgen","id":"1899","last_name":"Jasperneite"},{"last_name":"Diedrich","first_name":"Christian","full_name":"Diedrich, Christian"}],"year":2013,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public","title":"Effective and Fast Approach to Schedule Communication in PROFINET IRT Networks","citation":{"bjps":"Wisniewski L, Jasperneite J and Diedrich C (2013) Effective and Fast Approach to Schedule Communication in PROFINET IRT Networks. The 22nd IEEE International Symposium on Industrial Electronics (ISIE2013). Taipei, Taiwan.","mla":"Wisniewski, Lukasz, et al. “Effective and Fast Approach to Schedule Communication in PROFINET IRT Networks.” The 22nd IEEE International Symposium on Industrial Electronics (ISIE2013), 2013.","havard":"L. Wisniewski, J. Jasperneite, C. Diedrich, Effective and Fast Approach to Schedule Communication in PROFINET IRT Networks, in: The 22nd IEEE International Symposium on Industrial Electronics (ISIE2013), Taipei, Taiwan, 2013.","ufg":"Wisniewski, Lukasz et. al. (2013): Effective and Fast Approach to Schedule Communication in PROFINET IRT Networks, in: The 22nd IEEE International Symposium on Industrial Electronics (ISIE2013), Taipei, Taiwan.","ama":"Wisniewski L, Jasperneite J, Diedrich C. Effective and Fast Approach to Schedule Communication in PROFINET IRT Networks. In: The 22nd IEEE International Symposium on Industrial Electronics (ISIE2013). Taipei, Taiwan; 2013.","van":"Wisniewski L, Jasperneite J, Diedrich C. Effective and Fast Approach to Schedule Communication in PROFINET IRT Networks. In: The 22nd IEEE International Symposium on Industrial Electronics (ISIE2013). Taipei, Taiwan; 2013.","chicago":"Wisniewski, Lukasz, Jürgen Jasperneite, and Christian Diedrich. “Effective and Fast Approach to Schedule Communication in PROFINET IRT Networks.” In The 22nd IEEE International Symposium on Industrial Electronics (ISIE2013). Taipei, Taiwan, 2013.","ieee":"L. Wisniewski, J. Jasperneite, and C. Diedrich, “Effective and Fast Approach to Schedule Communication in PROFINET IRT Networks,” in The 22nd IEEE International Symposium on Industrial Electronics (ISIE2013), 2013.","apa":"Wisniewski, L., Jasperneite, J., & Diedrich, C. (2013). Effective and Fast Approach to Schedule Communication in PROFINET IRT Networks. In The 22nd IEEE International Symposium on Industrial Electronics (ISIE2013). Taipei, Taiwan.","din1505-2-1":"Wisniewski, Lukasz ; Jasperneite, Jürgen ; Diedrich, Christian: Effective and Fast Approach to Schedule Communication in PROFINET IRT Networks. In: The 22nd IEEE International Symposium on Industrial Electronics (ISIE2013). Taipei, Taiwan, 2013","chicago-de":"Wisniewski, Lukasz, Jürgen Jasperneite und Christian Diedrich. 2013. Effective and Fast Approach to Schedule Communication in PROFINET IRT Networks. In: The 22nd IEEE International Symposium on Industrial Electronics (ISIE2013). Taipei, Taiwan.","short":"L. Wisniewski, J. Jasperneite, C. Diedrich, in: The 22nd IEEE International Symposium on Industrial Electronics (ISIE2013), Taipei, Taiwan, 2013."}},{"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"full_name":"Jasperneite, Jürgen","first_name":"Jürgen","id":"1899","last_name":"Jasperneite"}],"year":2013,"status":"public","title":"INDUSTRIE 4.0: Wie kommt die Intelligenz in die Maschine? – Projektbeispiele aus dem BMBF-Spitzencluster „Intelligente Technische Systeme OstwestfalenLippe“ einbringen","citation":{"ieee":"J. Jasperneite, “INDUSTRIE 4.0: Wie kommt die Intelligenz in die Maschine? – Projektbeispiele aus dem BMBF-Spitzencluster „Intelligente Technische Systeme OstwestfalenLippe“ einbringen,” in Vortragsreihe INDUSTRIE 4.0 – Kompetenz aus NRW (Cluster ProduktionNRW), Hannovermesse 2013, 2013.","ama":"Jasperneite J. INDUSTRIE 4.0: Wie kommt die Intelligenz in die Maschine? – Projektbeispiele aus dem BMBF-Spitzencluster „Intelligente Technische Systeme OstwestfalenLippe“ einbringen. In: Vortragsreihe INDUSTRIE 4.0 – Kompetenz Aus NRW (Cluster ProduktionNRW), Hannovermesse 2013. ; 2013.","chicago":"Jasperneite, Jürgen. “INDUSTRIE 4.0: Wie Kommt Die Intelligenz in Die Maschine? – Projektbeispiele Aus Dem BMBF-Spitzencluster „Intelligente Technische Systeme OstwestfalenLippe“ Einbringen.” In Vortragsreihe INDUSTRIE 4.0 – Kompetenz Aus NRW (Cluster ProduktionNRW), Hannovermesse 2013, 2013.","apa":"Jasperneite, J. (2013). INDUSTRIE 4.0: Wie kommt die Intelligenz in die Maschine? – Projektbeispiele aus dem BMBF-Spitzencluster „Intelligente Technische Systeme OstwestfalenLippe“ einbringen. In Vortragsreihe INDUSTRIE 4.0 – Kompetenz aus NRW (Cluster ProduktionNRW), Hannovermesse 2013.","mla":"Jasperneite, Jürgen. “INDUSTRIE 4.0: Wie Kommt Die Intelligenz in Die Maschine? – Projektbeispiele Aus Dem BMBF-Spitzencluster „Intelligente Technische Systeme OstwestfalenLippe“ Einbringen.” Vortragsreihe INDUSTRIE 4.0 – Kompetenz Aus NRW (Cluster ProduktionNRW), Hannovermesse 2013, 2013.","bjps":"Jasperneite J (2013) INDUSTRIE 4.0: Wie Kommt Die Intelligenz in Die Maschine? – Projektbeispiele Aus Dem BMBF-Spitzencluster „Intelligente Technische Systeme OstwestfalenLippe“ Einbringen. Vortragsreihe INDUSTRIE 4.0 – Kompetenz Aus NRW (Cluster ProduktionNRW), Hannovermesse 2013.","havard":"J. Jasperneite, INDUSTRIE 4.0: Wie kommt die Intelligenz in die Maschine? – Projektbeispiele aus dem BMBF-Spitzencluster „Intelligente Technische Systeme OstwestfalenLippe“ einbringen, in: Vortragsreihe INDUSTRIE 4.0 – Kompetenz Aus NRW (Cluster ProduktionNRW), Hannovermesse 2013, 2013.","ufg":"Jasperneite, Jürgen (2013): INDUSTRIE 4.0: Wie kommt die Intelligenz in die Maschine? – Projektbeispiele aus dem BMBF-Spitzencluster „Intelligente Technische Systeme OstwestfalenLippe“ einbringen, in: Vortragsreihe INDUSTRIE 4.0 – Kompetenz aus NRW (Cluster ProduktionNRW), Hannovermesse 2013.","van":"Jasperneite J. INDUSTRIE 4.0: Wie kommt die Intelligenz in die Maschine? – Projektbeispiele aus dem BMBF-Spitzencluster „Intelligente Technische Systeme OstwestfalenLippe“ einbringen. In: Vortragsreihe INDUSTRIE 40 – Kompetenz aus NRW (Cluster ProduktionNRW), Hannovermesse 2013. 2013.","din1505-2-1":"Jasperneite, Jürgen: INDUSTRIE 4.0: Wie kommt die Intelligenz in die Maschine? – Projektbeispiele aus dem BMBF-Spitzencluster „Intelligente Technische Systeme OstwestfalenLippe“ einbringen. In: Vortragsreihe INDUSTRIE 4.0 – Kompetenz aus NRW (Cluster ProduktionNRW), Hannovermesse 2013, 2013","chicago-de":"Jasperneite, Jürgen. 2013. INDUSTRIE 4.0: Wie kommt die Intelligenz in die Maschine? – Projektbeispiele aus dem BMBF-Spitzencluster „Intelligente Technische Systeme OstwestfalenLippe“ einbringen. In: Vortragsreihe INDUSTRIE 4.0 – Kompetenz aus NRW (Cluster ProduktionNRW), Hannovermesse 2013.","short":"J. Jasperneite, in: Vortragsreihe INDUSTRIE 4.0 – Kompetenz Aus NRW (Cluster ProduktionNRW), Hannovermesse 2013, 2013."},"language":[{"iso":"eng"}],"_id":"4668","type":"conference","date_created":"2021-01-28T11:43:18Z","publication":"Vortragsreihe INDUSTRIE 4.0 – Kompetenz aus NRW (Cluster ProduktionNRW), Hannovermesse 2013","date_updated":"2023-03-15T13:49:54Z","user_id":"74222"},{"year":2013,"author":[{"id":"1899","first_name":"Jürgen","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public","title":"Industrie 4.0 zum Anfassen in der Lemgoer Modellfabrik","citation":{"van":"Jasperneite J. Industrie 4.0 zum Anfassen in der Lemgoer Modellfabrik. In: Forum Industrial IT des ZVEI anlässlich der Hannovermesse 2013. 2013.","mla":"Jasperneite, Jürgen. “Industrie 4.0 Zum Anfassen in Der Lemgoer Modellfabrik.” Forum Industrial IT Des ZVEI Anlässlich Der Hannovermesse 2013, 2013.","bjps":"Jasperneite J (2013) Industrie 4.0 Zum Anfassen in Der Lemgoer Modellfabrik. Forum Industrial IT Des ZVEI Anlässlich Der Hannovermesse 2013.","havard":"J. Jasperneite, Industrie 4.0 zum Anfassen in der Lemgoer Modellfabrik, in: Forum Industrial IT Des ZVEI Anlässlich Der Hannovermesse 2013, 2013.","ufg":"Jasperneite, Jürgen (2013): Industrie 4.0 zum Anfassen in der Lemgoer Modellfabrik, in: Forum Industrial IT des ZVEI anlässlich der Hannovermesse 2013.","apa":"Jasperneite, J. (2013). Industrie 4.0 zum Anfassen in der Lemgoer Modellfabrik. In Forum Industrial IT des ZVEI anlässlich der Hannovermesse 2013.","chicago":"Jasperneite, Jürgen. “Industrie 4.0 Zum Anfassen in Der Lemgoer Modellfabrik.” In Forum Industrial IT Des ZVEI Anlässlich Der Hannovermesse 2013, 2013.","short":"J. Jasperneite, in: Forum Industrial IT Des ZVEI Anlässlich Der Hannovermesse 2013, 2013.","din1505-2-1":"Jasperneite, Jürgen: Industrie 4.0 zum Anfassen in der Lemgoer Modellfabrik. In: Forum Industrial IT des ZVEI anlässlich der Hannovermesse 2013, 2013","chicago-de":"Jasperneite, Jürgen. 2013. Industrie 4.0 zum Anfassen in der Lemgoer Modellfabrik. In: Forum Industrial IT des ZVEI anlässlich der Hannovermesse 2013.","ama":"Jasperneite J. Industrie 4.0 zum Anfassen in der Lemgoer Modellfabrik. In: Forum Industrial IT Des ZVEI Anlässlich Der Hannovermesse 2013. ; 2013.","ieee":"J. Jasperneite, “Industrie 4.0 zum Anfassen in der Lemgoer Modellfabrik,” in Forum Industrial IT des ZVEI anlässlich der Hannovermesse 2013, 2013."},"_id":"4669","language":[{"iso":"eng"}],"publication":"Forum Industrial IT des ZVEI anlässlich der Hannovermesse 2013","type":"conference","date_created":"2021-01-28T11:46:52Z","user_id":"74222","date_updated":"2023-03-15T13:49:54Z"},{"title":"Industrie 4.0: Die 4. industrielle Revolution","volume":"1/2013","citation":{"chicago":"Jasperneite, Jürgen. “Industrie 4.0: Die 4. Industrielle Revolution.” VDI Ingenieurforum 1/2013 (2013): 36–38.","apa":"Jasperneite, J. (2013). Industrie 4.0: Die 4. industrielle Revolution. VDI Ingenieurforum, 1/2013, 36–38.","ufg":"Jasperneite, Jürgen (2013): Industrie 4.0: Die 4. industrielle Revolution, in: VDI Ingenieurforum 1/2013, S. 36–38.","mla":"Jasperneite, Jürgen. “Industrie 4.0: Die 4. Industrielle Revolution.” VDI Ingenieurforum, vol. 1/2013, 2013, pp. 36–38.","havard":"J. Jasperneite, Industrie 4.0: Die 4. industrielle Revolution, VDI Ingenieurforum. 1/2013 (2013) 36–38.","bjps":"Jasperneite J (2013) Industrie 4.0: Die 4. Industrielle Revolution. VDI Ingenieurforum 1/2013, 36–38.","van":"Jasperneite J. Industrie 4.0: Die 4. industrielle Revolution. VDI Ingenieurforum. 2013;1/2013:36–8.","chicago-de":"Jasperneite, Jürgen. 2013. Industrie 4.0: Die 4. industrielle Revolution. VDI Ingenieurforum 1/2013: 36–38.","din1505-2-1":"Jasperneite, Jürgen: Industrie 4.0: Die 4. industrielle Revolution. In: VDI Ingenieurforum Bd. 1/2013 (2013), S. 36–38","short":"J. Jasperneite, VDI Ingenieurforum 1/2013 (2013) 36–38.","ieee":"J. Jasperneite, “Industrie 4.0: Die 4. industrielle Revolution,” VDI Ingenieurforum, vol. 1/2013, pp. 36–38, 2013.","ama":"Jasperneite J. Industrie 4.0: Die 4. industrielle Revolution. VDI Ingenieurforum. 2013;1/2013:36-38."},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"full_name":"Jasperneite, Jürgen","id":"1899","last_name":"Jasperneite","first_name":"Jürgen"}],"year":2013,"page":"36 - 38","status":"public","date_created":"2021-01-28T11:47:50Z","type":"journal_article","publication":"VDI Ingenieurforum","date_updated":"2023-03-15T13:49:54Z","user_id":"74222","_id":"4670","language":[{"iso":"eng"}]},{"page":"182- 189","status":"public","issue":"1","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2013,"author":[{"last_name":"Gaj","first_name":"Piotr","full_name":"Gaj, Piotr"},{"first_name":"Jürgen","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","id":"1899"},{"last_name":"Felser","full_name":"Felser, Max","first_name":"Max"}],"volume":9,"citation":{"ieee":"P. Gaj, J. Jasperneite, and M. Felser, “Computer Communication within Industrial Distributed Environment – a Survey,” IEEE Transactions on Industrial Informatics, vol. 9, no. 1, pp. 182–189, 2013.","ama":"Gaj P, Jasperneite J, Felser M. Computer Communication within Industrial Distributed Environment – a Survey. IEEE Transactions on Industrial Informatics. 2013;9(1):182-189.","chicago-de":"Gaj, Piotr, Jürgen Jasperneite und Max Felser. 2013. Computer Communication within Industrial Distributed Environment – a Survey. IEEE Transactions on Industrial Informatics 9, Nr. 1: 182–189.","din1505-2-1":"Gaj, Piotr ; Jasperneite, Jürgen ; Felser, Max: Computer Communication within Industrial Distributed Environment – a Survey. In: IEEE Transactions on Industrial Informatics Bd. 9 (2013), Nr. 1, S. 182–189","short":"P. Gaj, J. Jasperneite, M. Felser, IEEE Transactions on Industrial Informatics 9 (2013) 182–189.","chicago":"Gaj, Piotr, Jürgen Jasperneite, and Max Felser. “Computer Communication within Industrial Distributed Environment – a Survey.” IEEE Transactions on Industrial Informatics 9, no. 1 (2013): 182–89.","apa":"Gaj, P., Jasperneite, J., & Felser, M. (2013). Computer Communication within Industrial Distributed Environment – a Survey. IEEE Transactions on Industrial Informatics, 9(1), 182–189.","havard":"P. Gaj, J. Jasperneite, M. Felser, Computer Communication within Industrial Distributed Environment – a Survey, IEEE Transactions on Industrial Informatics. 9 (2013) 182–189.","bjps":"Gaj P, Jasperneite J and Felser M (2013) Computer Communication within Industrial Distributed Environment – a Survey. IEEE Transactions on Industrial Informatics 9, 182–189.","mla":"Gaj, Piotr, et al. “Computer Communication within Industrial Distributed Environment – a Survey.” IEEE Transactions on Industrial Informatics, vol. 9, no. 1, 2013, pp. 182–89.","ufg":"Gaj, Piotr et. al. (2013): Computer Communication within Industrial Distributed Environment – a Survey, in: IEEE Transactions on Industrial Informatics 9 (1), S. 182–189.","van":"Gaj P, Jasperneite J, Felser M. Computer Communication within Industrial Distributed Environment – a Survey. IEEE Transactions on Industrial Informatics. 2013;9(1):182–9."},"title":"Computer Communication within Industrial Distributed Environment – a Survey","_id":"4671","language":[{"iso":"eng"}],"intvolume":" 9","date_updated":"2023-03-15T13:49:54Z","user_id":"74222","date_created":"2021-01-28T11:51:32Z","type":"journal_article","publication":"IEEE Transactions on Industrial Informatics"},{"citation":{"ama":"Czybik B, Hausmann S, Heiss S, Jasperneite J. Performance evaluation of MAC algorithms for real-time Ethernet communication systems. In: 2013 11th IEEE International Conference on Industrial Informatics (INDIN). ; 2013. doi:10.1109/indin.2013.6622965","ieee":"B. Czybik, S. Hausmann, S. Heiss, and J. Jasperneite, “Performance evaluation of MAC algorithms for real-time Ethernet communication systems,” in 2013 11th IEEE International Conference on Industrial Informatics (INDIN), 2013.","van":"Czybik B, Hausmann S, Heiss S, Jasperneite J. Performance evaluation of MAC algorithms for real-time Ethernet communication systems. In: 2013 11th IEEE International Conference on Industrial Informatics (INDIN). 2013.","havard":"B. Czybik, S. Hausmann, S. Heiss, J. Jasperneite, Performance evaluation of MAC algorithms for real-time Ethernet communication systems, in: 2013 11th IEEE International Conference on Industrial Informatics (INDIN), 2013.","bjps":"Czybik B et al. (2013) Performance Evaluation of MAC Algorithms for Real-Time Ethernet Communication Systems. 2013 11th IEEE International Conference on Industrial Informatics (INDIN).","mla":"Czybik, Bjoern, et al. “Performance Evaluation of MAC Algorithms for Real-Time Ethernet Communication Systems.” 2013 11th IEEE International Conference on Industrial Informatics (INDIN), 2013, doi:10.1109/indin.2013.6622965.","ufg":"Czybik, Bjoern et. al. (2013): Performance evaluation of MAC algorithms for real-time Ethernet communication systems, in: 2013 11th IEEE International Conference on Industrial Informatics (INDIN).","apa":"Czybik, B., Hausmann, S., Heiss, S., & Jasperneite, J. (2013). Performance evaluation of MAC algorithms for real-time Ethernet communication systems. In 2013 11th IEEE International Conference on Industrial Informatics (INDIN). https://doi.org/10.1109/indin.2013.6622965","chicago":"Czybik, Bjoern, Stefan Hausmann, Stefan Heiss, and Jürgen Jasperneite. “Performance Evaluation of MAC Algorithms for Real-Time Ethernet Communication Systems.” In 2013 11th IEEE International Conference on Industrial Informatics (INDIN), 2013. https://doi.org/10.1109/indin.2013.6622965.","short":"B. Czybik, S. Hausmann, S. Heiss, J. Jasperneite, in: 2013 11th IEEE International Conference on Industrial Informatics (INDIN), 2013.","din1505-2-1":"Czybik, Bjoern ; Hausmann, Stefan ; Heiss, Stefan ; Jasperneite, Jürgen: Performance evaluation of MAC algorithms for real-time Ethernet communication systems. In: 2013 11th IEEE International Conference on Industrial Informatics (INDIN), 2013","chicago-de":"Czybik, Bjoern, Stefan Hausmann, Stefan Heiss und Jürgen Jasperneite. 2013. Performance evaluation of MAC algorithms for real-time Ethernet communication systems. In: 2013 11th IEEE International Conference on Industrial Informatics (INDIN). doi:10.1109/indin.2013.6622965, ."},"publication_status":"published","title":"Performance evaluation of MAC algorithms for real-time Ethernet communication systems","status":"public","author":[{"last_name":"Czybik","first_name":"Bjoern","full_name":"Czybik, Bjoern"},{"first_name":"Stefan","last_name":"Hausmann","full_name":"Hausmann, Stefan"},{"last_name":"Heiss","id":"1031","full_name":"Heiss, Stefan","first_name":"Stefan"},{"first_name":"Jürgen","last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen"}],"year":2013,"department":[{"_id":"DEP5000"},{"_id":"DEP5023"}],"user_id":"10982","date_updated":"2023-03-15T13:50:00Z","publication_identifier":{"isbn":["9781479907526"]},"publication":"2013 11th IEEE International Conference on Industrial Informatics (INDIN)","type":"conference","date_created":"2021-04-19T09:22:41Z","_id":"5595","doi":"10.1109/indin.2013.6622965","language":[{"iso":"eng"}]},{"type":"conference","date_created":"2021-04-19T09:22:52Z","publication_identifier":{"isbn":["9781467347372","9781467347358","9781467347365"]},"publication":"Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation (ETFA 2012)","date_updated":"2023-03-15T13:50:00Z","user_id":"10982","language":[{"iso":"eng"}],"doi":"10.1109/etfa.2012.6489750","_id":"5596","title":"Usage of public key infrastructures in automation networks","publication_status":"published","citation":{"ama":"Hausmann S, Heiss S. Usage of public key infrastructures in automation networks. In: Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation (ETFA 2012). ; 2013. doi:10.1109/etfa.2012.6489750","ieee":"S. Hausmann and S. Heiss, “Usage of public key infrastructures in automation networks,” in Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation (ETFA 2012), 2013.","van":"Hausmann S, Heiss S. Usage of public key infrastructures in automation networks. In: Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation (ETFA 2012). 2013.","havard":"S. Hausmann, S. Heiss, Usage of public key infrastructures in automation networks, in: Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation (ETFA 2012), 2013.","bjps":"Hausmann S and Heiss S (2013) Usage of Public Key Infrastructures in Automation Networks. Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation (ETFA 2012).","mla":"Hausmann, Stefan, and Stefan Heiss. “Usage of Public Key Infrastructures in Automation Networks.” Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation (ETFA 2012), 2013, doi:10.1109/etfa.2012.6489750.","ufg":"Hausmann, Stefan/Heiss, Stefan (2013): Usage of public key infrastructures in automation networks, in: Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation (ETFA 2012).","apa":"Hausmann, S., & Heiss, S. (2013). Usage of public key infrastructures in automation networks. In Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation (ETFA 2012). https://doi.org/10.1109/etfa.2012.6489750","chicago":"Hausmann, Stefan, and Stefan Heiss. “Usage of Public Key Infrastructures in Automation Networks.” In Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation (ETFA 2012), 2013. https://doi.org/10.1109/etfa.2012.6489750.","short":"S. Hausmann, S. Heiss, in: Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation (ETFA 2012), 2013.","chicago-de":"Hausmann, Stefan und Stefan Heiss. 2013. Usage of public key infrastructures in automation networks. In: Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation (ETFA 2012). doi:10.1109/etfa.2012.6489750, .","din1505-2-1":"Hausmann, Stefan ; Heiss, Stefan: Usage of public key infrastructures in automation networks. In: Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation (ETFA 2012), 2013"},"department":[{"_id":"DEP5000"},{"_id":"DEP5023"}],"author":[{"full_name":"Hausmann, Stefan","first_name":"Stefan","last_name":"Hausmann"},{"full_name":"Heiss, Stefan","id":"1031","last_name":"Heiss","first_name":"Stefan"}],"year":2013,"status":"public"},{"date_updated":"2023-03-15T13:50:00Z","user_id":"79260","date_created":"2021-04-19T09:36:18Z","type":"conference","publication":"VDI Kongress Automation","language":[{"iso":"eng"}],"_id":"5603","title":"Analyse der IT-Security in der industriellen Automation.","status":"public","conference":{"name":"Automation 2013","location":"Baden-Baden","end_date":"2013-06-26","start_date":"2013-06-25"},"department":[{"_id":"DEP5000"},{"_id":"DEP5023"}],"year":2013,"author":[{"first_name":"Tino","last_name":"Döhring","full_name":"Döhring, Tino"},{"full_name":"Werner, Thomas","last_name":"Werner","id":"46437","first_name":"Thomas"},{"first_name":"Matthias","full_name":"Riedel, Matthias","last_name":"Riedel"},{"full_name":"Heiss, Stefan","id":"1031","first_name":"Stefan","last_name":"Heiss"}]},{"year":2013,"author":[{"last_name":"Runde","full_name":"Runde, Markus","first_name":"Markus"},{"last_name":"Czybik","full_name":"Czybik, Björn","first_name":"Björn"},{"last_name":"Tebbe","full_name":"Tebbe, Christopher","first_name":"Christopher"},{"first_name":"Stefan","full_name":"Hausmann, Stefan","last_name":"Hausmann"},{"full_name":"Niemann, Karl-Heinz","first_name":"Karl-Heinz","last_name":"Niemann"},{"last_name":"Heiss","first_name":"Stefan","id":"1031","full_name":"Heiss, Stefan"}],"department":[{"_id":"DEP5000"},{"_id":"DEP5023"}],"status":"public","title":"Performanceevaluation eines Security-Layers für die Echtzeit-kommunikation mit PROFINET auf ressourcenbeschränkten Plattformen.","citation":{"ama":"Runde M, Czybik B, Tebbe C, Hausmann S, Niemann K-H, Heiss S. Performanceevaluation eines Security-Layers für die Echtzeit-kommunikation mit PROFINET auf ressourcenbeschränkten Plattformen. In: VDI Kongress AUTOMATION. ; 2013.","ieee":"M. Runde, B. Czybik, C. Tebbe, S. Hausmann, K.-H. Niemann, and S. Heiss, “Performanceevaluation eines Security-Layers für die Echtzeit-kommunikation mit PROFINET auf ressourcenbeschränkten Plattformen.,” in VDI Kongress AUTOMATION, 2013.","ufg":"Runde, Markus et. al. (2013): Performanceevaluation eines Security-Layers für die Echtzeit-kommunikation mit PROFINET auf ressourcenbeschränkten Plattformen., in: VDI Kongress AUTOMATION.","havard":"M. Runde, B. Czybik, C. Tebbe, S. Hausmann, K.-H. Niemann, S. Heiss, Performanceevaluation eines Security-Layers für die Echtzeit-kommunikation mit PROFINET auf ressourcenbeschränkten Plattformen., in: VDI Kongress AUTOMATION, 2013.","bjps":"Runde M et al. (2013) Performanceevaluation Eines Security-Layers Für Die Echtzeit-Kommunikation Mit PROFINET Auf Ressourcenbeschränkten Plattformen. VDI Kongress AUTOMATION.","mla":"Runde, Markus, et al. “Performanceevaluation Eines Security-Layers Für Die Echtzeit-Kommunikation Mit PROFINET Auf Ressourcenbeschränkten Plattformen.” VDI Kongress AUTOMATION, 2013.","van":"Runde M, Czybik B, Tebbe C, Hausmann S, Niemann K-H, Heiss S. Performanceevaluation eines Security-Layers für die Echtzeit-kommunikation mit PROFINET auf ressourcenbeschränkten Plattformen. In: VDI Kongress AUTOMATION. 2013.","chicago":"Runde, Markus, Björn Czybik, Christopher Tebbe, Stefan Hausmann, Karl-Heinz Niemann, and Stefan Heiss. “Performanceevaluation Eines Security-Layers Für Die Echtzeit-Kommunikation Mit PROFINET Auf Ressourcenbeschränkten Plattformen.” In VDI Kongress AUTOMATION, 2013.","apa":"Runde, M., Czybik, B., Tebbe, C., Hausmann, S., Niemann, K.-H., & Heiss, S. (2013). Performanceevaluation eines Security-Layers für die Echtzeit-kommunikation mit PROFINET auf ressourcenbeschränkten Plattformen. In VDI Kongress AUTOMATION.","chicago-de":"Runde, Markus, Björn Czybik, Christopher Tebbe, Stefan Hausmann, Karl-Heinz Niemann und Stefan Heiss. 2013. Performanceevaluation eines Security-Layers für die Echtzeit-kommunikation mit PROFINET auf ressourcenbeschränkten Plattformen. In: VDI Kongress AUTOMATION.","din1505-2-1":"Runde, Markus ; Czybik, Björn ; Tebbe, Christopher ; Hausmann, Stefan ; Niemann, Karl-Heinz ; Heiss, Stefan: Performanceevaluation eines Security-Layers für die Echtzeit-kommunikation mit PROFINET auf ressourcenbeschränkten Plattformen. In: VDI Kongress AUTOMATION, 2013","short":"M. Runde, B. Czybik, C. Tebbe, S. Hausmann, K.-H. Niemann, S. Heiss, in: VDI Kongress AUTOMATION, 2013."},"language":[{"iso":"eng"}],"_id":"5604","publication":"VDI Kongress AUTOMATION","date_created":"2021-04-19T09:39:03Z","type":"conference","user_id":"10982","date_updated":"2023-03-15T13:50:00Z"},{"_id":"5888","language":[{"iso":"eng"}],"corporate_editor":["Deutscher Geographen Tag "],"user_id":"83781","date_updated":"2023-09-22T09:29:58Z","publication":"Fachsitzung \"Modellierung und Simulation von Flächennutzungswandel, Ursachen und Folgen\" ","date_created":"2021-05-13T19:40:33Z","type":"conference","status":"public","abstract":[{"text":"Der von den Autoren erstellte GIS-Webdienst dient der Simulation und Bewertung kommunaler Flächenentscheidungen. Im Rahmen der Machbarkeitsstudie werden aktuelle Technologien webbasierter Geoinformationssysteme mit Methoden agenten-basierter Konfrontations- und Kooperationsentscheidungen verknüpft.","lang":"ger"}],"author":[{"last_name":"Greve","full_name":"Greve, Klaus","first_name":"Klaus"},{"id":"61520","last_name":"Häusler","full_name":"Häusler, Axel","first_name":"Axel"},{"first_name":"Florian","last_name":"Bingel","full_name":"Bingel, Florian"}],"year":"2013","department":[{"_id":"DEP1025"},{"_id":"DEP1055"}],"conference":{"start_date":"2013-10-01","end_date":"2013-10-07","location":"Pasau","name":"58. Deutscher Geographen Tag "},"citation":{"din1505-2-1":"Greve, Klaus ; Häusler, Axel ; Bingel, Florian: ISI – einfaches Informationswerkzeug zur strategischen Innenentwicklungs-planung. In: Deutscher Geographen Tag (Hrsg.): Fachsitzung „Modellierung und Simulation von Flächennutzungswandel, Ursachen und Folgen“ , 2013","chicago-de":"Greve, Klaus, Axel Häusler und Florian Bingel. 2013. ISI – einfaches Informationswerkzeug zur strategischen Innenentwicklungs-planung. In: Fachsitzung „Modellierung und Simulation von Flächennutzungswandel, Ursachen und Folgen“ , hg. von Deutscher Geographen Tag .","short":"K. Greve, A. Häusler, F. Bingel, in: Deutscher Geographen Tag (Ed.), Fachsitzung “Modellierung Und Simulation von Flächennutzungswandel, Ursachen Und Folgen” , 2013.","ufg":"Greve, Klaus/Häusler, Axel/Bingel, Florian: ISI – einfaches Informationswerkzeug zur strategischen Innenentwicklungs-planung, in: Deutscher Geographen Tag (Hg.): Fachsitzung „Modellierung und Simulation von Flächennutzungswandel, Ursachen und Folgen“ , o. O. 2013.","bjps":"Greve K, Häusler A and Bingel F (2013) ISI – Einfaches Informationswerkzeug Zur Strategischen Innenentwicklungs-Planung. In Deutscher Geographen Tag (ed.), Fachsitzung ‘Modellierung Und Simulation von Flächennutzungswandel, Ursachen Und Folgen’ .","mla":"Greve, Klaus, et al. “ISI – Einfaches Informationswerkzeug Zur Strategischen Innenentwicklungs-Planung.” Fachsitzung “Modellierung Und Simulation von Flächennutzungswandel, Ursachen Und Folgen” , edited by Deutscher Geographen Tag , 2013.","havard":"K. Greve, A. Häusler, F. Bingel, ISI – einfaches Informationswerkzeug zur strategischen Innenentwicklungs-planung, in: Deutscher Geographen Tag (Ed.), Fachsitzung “Modellierung Und Simulation von Flächennutzungswandel, Ursachen Und Folgen” , 2013.","van":"Greve K, Häusler A, Bingel F. ISI – einfaches Informationswerkzeug zur strategischen Innenentwicklungs-planung. In: Deutscher Geographen Tag , editor. Fachsitzung “Modellierung und Simulation von Flächennutzungswandel, Ursachen und Folgen” . 2013.","chicago":"Greve, Klaus, Axel Häusler, and Florian Bingel. “ISI – Einfaches Informationswerkzeug Zur Strategischen Innenentwicklungs-Planung.” In Fachsitzung “Modellierung Und Simulation von Flächennutzungswandel, Ursachen Und Folgen” , edited by Deutscher Geographen Tag , 2013.","apa":"Greve, K., Häusler, A., & Bingel, F. (2013). ISI – einfaches Informationswerkzeug zur strategischen Innenentwicklungs-planung. In Deutscher Geographen Tag (Ed.), Fachsitzung “Modellierung und Simulation von Flächennutzungswandel, Ursachen und Folgen” .","ama":"Greve K, Häusler A, Bingel F. ISI – einfaches Informationswerkzeug zur strategischen Innenentwicklungs-planung. In: Deutscher Geographen Tag , ed. Fachsitzung “Modellierung Und Simulation von Flächennutzungswandel, Ursachen Und Folgen” . ; 2013.","ieee":"K. Greve, A. Häusler, and F. Bingel, “ISI – einfaches Informationswerkzeug zur strategischen Innenentwicklungs-planung,” in Fachsitzung “Modellierung und Simulation von Flächennutzungswandel, Ursachen und Folgen” , Pasau, 2013."},"publication_status":"published","title":"ISI – einfaches Informationswerkzeug zur strategischen Innenentwicklungs-planung","extern":"1"},{"author":[{"id":"61520","last_name":"Häusler","full_name":"Häusler, Axel","first_name":"Axel"}],"year":"2013","conference":{"location":"Eberbach","name":"Symposium \"Neue Kooperationen für das Land\"","start_date":"2013-10-01","end_date":"2013-10-02"},"department":[{"_id":"DEP1025"},{"_id":"DEP1055"}],"status":"public","title":"Einfaches geodatenbasiertes Informationswerkzeug zur strategischen Innenentwicklungsplanung","extern":"1","citation":{"short":"A. Häusler, in: KIT - Karlsruhe Institute of Technology (Ed.), 2013.","din1505-2-1":"Häusler, Axel: Einfaches geodatenbasiertes Informationswerkzeug zur strategischen Innenentwicklungsplanung. In: KIT - Karlsruhe Institute of Technology (Hrsg.): , 2013","chicago-de":"Häusler, Axel. 2013. Einfaches geodatenbasiertes Informationswerkzeug zur strategischen Innenentwicklungsplanung. In: , hg. von KIT - Karlsruhe Institute of Technology.","apa":"Häusler, A. (2013). Einfaches geodatenbasiertes Informationswerkzeug zur strategischen Innenentwicklungsplanung (KIT - Karlsruhe Institute of Technology, Ed.).","chicago":"Häusler, Axel. “Einfaches Geodatenbasiertes Informationswerkzeug Zur Strategischen Innenentwicklungsplanung.” edited by KIT - Karlsruhe Institute of Technology, 2013.","van":"Häusler A. Einfaches geodatenbasiertes Informationswerkzeug zur strategischen Innenentwicklungsplanung. In: KIT - Karlsruhe Institute of Technology, editor. 2013.","ufg":"Häusler, Axel: Einfaches geodatenbasiertes Informationswerkzeug zur strategischen Innenentwicklungsplanung, in: KIT - Karlsruhe Institute of Technology (Hg.): o. O. 2013.","bjps":"Häusler A (2013) Einfaches Geodatenbasiertes Informationswerkzeug Zur Strategischen Innenentwicklungsplanung. In KIT - Karlsruhe Institute of Technology (ed.).","mla":"Häusler, Axel. Einfaches Geodatenbasiertes Informationswerkzeug Zur Strategischen Innenentwicklungsplanung. Edited by KIT - Karlsruhe Institute of Technology, 2013.","havard":"A. Häusler, Einfaches geodatenbasiertes Informationswerkzeug zur strategischen Innenentwicklungsplanung, in: KIT - Karlsruhe Institute of Technology (Ed.), 2013.","ieee":"A. Häusler, “Einfaches geodatenbasiertes Informationswerkzeug zur strategischen Innenentwicklungsplanung,” Eberbach, 2013.","ama":"Häusler A. Einfaches geodatenbasiertes Informationswerkzeug zur strategischen Innenentwicklungsplanung. In: KIT - Karlsruhe Institute of Technology, ed. ; 2013."},"publication_status":"published","language":[{"iso":"eng"}],"_id":"5889","type":"conference","date_created":"2021-05-13T19:44:46Z","user_id":"83781","date_updated":"2023-09-21T14:23:23Z","corporate_editor":["KIT - Karlsruhe Institute of Technology"]},{"status":"public","year":2013,"author":[{"first_name":"Ulrich","id":"12119","last_name":"Müller","full_name":"Müller, Ulrich"}],"conference":{"end_date":"2013-05-24","start_date":"2013-05-24","name":"10. Trierer Lebensmitteltag","location":"Trier"},"department":[{"_id":"DEP4009"},{"_id":"DEP4023"}],"citation":{"chicago-de":"Müller, Ulrich. 2013. Wasser – der kalte Entzug – Dynamische Gefriertrocknung. In: .","din1505-2-1":"Müller, Ulrich: Wasser – der kalte Entzug – Dynamische Gefriertrocknung. In: , 2013","short":"U. Müller, in: 2013.","chicago":"Müller, Ulrich. “Wasser – Der Kalte Entzug – Dynamische Gefriertrocknung,” 2013.","ieee":"U. Müller, “Wasser – der kalte Entzug – Dynamische Gefriertrocknung,” presented at the 10. Trierer Lebensmitteltag, Trier, 2013.","apa":"Müller, U. (2013). Wasser – der kalte Entzug – Dynamische Gefriertrocknung. Presented at the 10. Trierer Lebensmitteltag, Trier.","bjps":"Müller U (2013) Wasser – Der Kalte Entzug – Dynamische Gefriertrocknung.","havard":"U. Müller, Wasser – der kalte Entzug – Dynamische Gefriertrocknung, in: 2013.","mla":"Müller, Ulrich. Wasser – Der Kalte Entzug – Dynamische Gefriertrocknung. 2013.","ufg":"Müller, Ulrich (2013): Wasser – der kalte Entzug – Dynamische Gefriertrocknung, in: .","ama":"Müller U. Wasser – der kalte Entzug – Dynamische Gefriertrocknung. In: ; 2013.","van":"Müller U. Wasser – der kalte Entzug – Dynamische Gefriertrocknung. In 2013."},"title":"Wasser – der kalte Entzug – Dynamische Gefriertrocknung","_id":"6179","language":[{"iso":"eng"}],"user_id":"45673","date_updated":"2023-03-15T13:50:04Z","type":"conference","date_created":"2021-09-07T09:18:44Z"},{"publisher":"nn","status":"public","author":[{"last_name":"Wesemann","first_name":"Derk","full_name":"Wesemann, Derk"},{"first_name":"Olaf","full_name":"Grünberg, Olaf","last_name":"Grünberg"},{"first_name":"Stefan","last_name":"Witte","id":"1605","full_name":"Witte, Stefan"}],"year":"2013","conference":{"name":"Embedded Systems Symposium München","location":"München","start_date":"2013-07-09","end_date":"2013-07-10"},"department":[{"_id":"DEP5000"},{"_id":"DEP5023"}],"citation":{"van":"Wesemann D, Grünberg O, Witte S. CAN-Transceiver im Nahfeld - ein kontaktloser Feldbus. Embedded Systems Symposium München. nn; 2013.","ama":"Wesemann D, Grünberg O, Witte S. CAN-Transceiver im Nahfeld - ein kontaktloser Feldbus. nn; 2013.","ufg":"Wesemann, Derk/Grünberg, Olaf/Witte, Stefan: CAN-Transceiver im Nahfeld - ein kontaktloser Feldbus, o. O. 2013.","havard":"D. Wesemann, O. Grünberg, S. Witte, CAN-Transceiver im Nahfeld - ein kontaktloser Feldbus, nn, 2013.","mla":"Wesemann, Derk, et al. “CAN-Transceiver im Nahfeld - ein kontaktloser Feldbus.” Embedded Systems Symposium München, nn, 2013.","bjps":"Wesemann D, Grünberg O and Witte S (2013) CAN-Transceiver im Nahfeld - ein kontaktloser Feldbus. nn.","apa":"Wesemann, D., Grünberg, O., & Witte, S. (2013). CAN-Transceiver im Nahfeld - ein kontaktloser Feldbus. In Embedded Systems Symposium München. Embedded Systems Symposium München, München. nn.","ieee":"D. Wesemann, O. Grünberg, and S. Witte, CAN-Transceiver im Nahfeld - ein kontaktloser Feldbus. nn, 2013.","chicago":"Wesemann, Derk, Olaf Grünberg, and Stefan Witte. CAN-Transceiver im Nahfeld - ein kontaktloser Feldbus. Embedded Systems Symposium München. nn, 2013.","short":"D. Wesemann, O. Grünberg, S. Witte, CAN-Transceiver im Nahfeld - ein kontaktloser Feldbus, nn, 2013.","chicago-de":"Wesemann, Derk, Olaf Grünberg und Stefan Witte. 2013. CAN-Transceiver im Nahfeld - ein kontaktloser Feldbus. Embedded Systems Symposium München. nn.","din1505-2-1":"Wesemann, Derk ; Grünberg, Olaf ; Witte, Stefan: CAN-Transceiver im Nahfeld - ein kontaktloser Feldbus : nn, 2013"},"publication_status":"published","title":"CAN-Transceiver im Nahfeld - ein kontaktloser Feldbus","_id":"10165","language":[{"iso":"ger"}],"user_id":"83781","date_updated":"2023-08-03T08:55:28Z","related_material":{"link":[{"url":"https://www.researchgate.net/publication/266462913_CAN-Transceiver_im_Nahfeld_-_ein_kontaktloser_Feldbus","relation":"confirmation"}]},"publication":"Embedded Systems Symposium München","type":"conference_editor_article","date_created":"2023-07-27T10:58:52Z"},{"_id":"4805","language":[{"iso":"eng"}],"place":"Cagliari, Italy","date_updated":"2023-03-15T13:49:55Z","user_id":"68554","date_created":"2021-02-02T09:13:41Z","type":"conference","publication":"18thIEEE International Conference on Emerging Technologies and Factory Automation (ETFA)","status":"public","department":[{"_id":"DEP5023"}],"author":[{"first_name":"Björn","full_name":"Böttcher, Björn","last_name":"Böttcher"},{"full_name":"Badinger, Johann","first_name":"Johann","last_name":"Badinger"},{"id":"44238","last_name":"Moriz","full_name":"Moriz, Natalia","first_name":"Natalia"},{"first_name":"Oliver","full_name":"Niggemann, Oliver","last_name":"Niggemann","id":"10876"}],"year":2013,"citation":{"ama":"Böttcher B, Badinger J, Moriz N, Niggemann O. Design of Industrial Automation Systems - Formal Requirements in the Engineering Process. In: 18thIEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy; 2013.","ieee":"B. Böttcher, J. Badinger, N. Moriz, and O. Niggemann, “Design of Industrial Automation Systems - Formal Requirements in the Engineering Process,” in 18thIEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2013.","bjps":"Böttcher B et al. (2013) Design of Industrial Automation Systems - Formal Requirements in the Engineering Process. 18thIEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy.","mla":"Böttcher, Björn, et al. “Design of Industrial Automation Systems - Formal Requirements in the Engineering Process.” 18thIEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2013.","havard":"B. Böttcher, J. Badinger, N. Moriz, O. Niggemann, Design of Industrial Automation Systems - Formal Requirements in the Engineering Process, in: 18thIEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Cagliari, Italy, 2013.","ufg":"Böttcher, Björn et. al. (2013): Design of Industrial Automation Systems - Formal Requirements in the Engineering Process, in: 18thIEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Cagliari, Italy.","van":"Böttcher B, Badinger J, Moriz N, Niggemann O. Design of Industrial Automation Systems - Formal Requirements in the Engineering Process. In: 18thIEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy; 2013.","chicago":"Böttcher, Björn, Johann Badinger, Natalia Moriz, and Oliver Niggemann. “Design of Industrial Automation Systems - Formal Requirements in the Engineering Process.” In 18thIEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy, 2013.","apa":"Böttcher, B., Badinger, J., Moriz, N., & Niggemann, O. (2013). Design of Industrial Automation Systems - Formal Requirements in the Engineering Process. In 18thIEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy.","din1505-2-1":"Böttcher, Björn ; Badinger, Johann ; Moriz, Natalia ; Niggemann, Oliver: Design of Industrial Automation Systems - Formal Requirements in the Engineering Process. In: 18thIEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy, 2013","chicago-de":"Böttcher, Björn, Johann Badinger, Natalia Moriz und Oliver Niggemann. 2013. Design of Industrial Automation Systems - Formal Requirements in the Engineering Process. In: 18thIEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy.","short":"B. Böttcher, J. Badinger, N. Moriz, O. Niggemann, in: 18thIEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Cagliari, Italy, 2013."},"title":"Design of Industrial Automation Systems - Formal Requirements in the Engineering Process"},{"status":"public","department":[{"_id":"DEP5023"}],"author":[{"first_name":"Nikolai","last_name":"Schetinin","full_name":"Schetinin, Nikolai"},{"id":"44238","last_name":"Moriz","full_name":"Moriz, Natalia","first_name":"Natalia"},{"last_name":"Kumar","first_name":"Barath","full_name":"Kumar, Barath"},{"full_name":"Faltinski, Sebastian","last_name":"Faltinski","first_name":"Sebastian"},{"full_name":"Niggemann, Oliver","first_name":"Oliver","last_name":"Niggemann","id":"10876"},{"id":"11158","full_name":"Maier, Alexander","last_name":"Maier","first_name":"Alexander"}],"year":2013,"citation":{"ama":"Schetinin N, Moriz N, Kumar B, Faltinski S, Niggemann O, Maier A. Why do verification approaches in automation rarely use HIL-test? In: International Conference on Industrial Technology (ICIT) 25.-27. February 2013, Cape Town, South Africa, . ; 2013.","ieee":"N. Schetinin, N. Moriz, B. Kumar, S. Faltinski, O. Niggemann, and A. Maier, “Why do verification approaches in automation rarely use HIL-test?,” in International Conference on Industrial Technology (ICIT) 25.-27. February 2013, Cape Town, South Africa, , 2013.","van":"Schetinin N, Moriz N, Kumar B, Faltinski S, Niggemann O, Maier A. Why do verification approaches in automation rarely use HIL-test? In: International Conference on Industrial Technology (ICIT) 25-27 February 2013, Cape Town, South Africa, . 2013.","ufg":"Schetinin, Nikolai et. al. (2013): Why do verification approaches in automation rarely use HIL-test?, in: International Conference on Industrial Technology (ICIT) 25.-27. February 2013, Cape Town, South Africa, .","bjps":"Schetinin N et al. (2013) Why Do Verification Approaches in Automation Rarely Use HIL-Test? International Conference on Industrial Technology (ICIT) 25.-27. February 2013, Cape Town, South Africa, .","mla":"Schetinin, Nikolai, et al. “Why Do Verification Approaches in Automation Rarely Use HIL-Test?” International Conference on Industrial Technology (ICIT) 25.-27. February 2013, Cape Town, South Africa, , 2013.","havard":"N. Schetinin, N. Moriz, B. Kumar, S. Faltinski, O. Niggemann, A. Maier, Why do verification approaches in automation rarely use HIL-test?, in: International Conference on Industrial Technology (ICIT) 25.-27. February 2013, Cape Town, South Africa, , 2013.","apa":"Schetinin, N., Moriz, N., Kumar, B., Faltinski, S., Niggemann, O., & Maier, A. (2013). Why do verification approaches in automation rarely use HIL-test? In International Conference on Industrial Technology (ICIT) 25.-27. February 2013, Cape Town, South Africa, .","chicago":"Schetinin, Nikolai, Natalia Moriz, Barath Kumar, Sebastian Faltinski, Oliver Niggemann, and Alexander Maier. “Why Do Verification Approaches in Automation Rarely Use HIL-Test?” In International Conference on Industrial Technology (ICIT) 25.-27. February 2013, Cape Town, South Africa, , 2013.","short":"N. Schetinin, N. Moriz, B. Kumar, S. Faltinski, O. Niggemann, A. Maier, in: International Conference on Industrial Technology (ICIT) 25.-27. February 2013, Cape Town, South Africa, , 2013.","din1505-2-1":"Schetinin, Nikolai ; Moriz, Natalia ; Kumar, Barath ; Faltinski, Sebastian ; Niggemann, Oliver ; Maier, Alexander: Why do verification approaches in automation rarely use HIL-test? In: International Conference on Industrial Technology (ICIT) 25.-27. February 2013, Cape Town, South Africa, , 2013","chicago-de":"Schetinin, Nikolai, Natalia Moriz, Barath Kumar, Sebastian Faltinski, Oliver Niggemann und Alexander Maier. 2013. Why do verification approaches in automation rarely use HIL-test? In: International Conference on Industrial Technology (ICIT) 25.-27. February 2013, Cape Town, South Africa, ."},"title":"Why do verification approaches in automation rarely use HIL-test?","language":[{"iso":"eng"}],"_id":"4806","date_updated":"2023-03-15T13:49:55Z","user_id":"68554","date_created":"2021-02-02T09:14:39Z","type":"conference","publication":"International Conference on Industrial Technology (ICIT) 25.-27. February 2013, Cape Town, South Africa, "},{"author":[{"first_name":"Johann","last_name":"Austermann","full_name":"Austermann, Johann","id":"42114"},{"first_name":"Holger","id":"1693","last_name":"Borcherding","full_name":"Borcherding, Holger"},{"last_name":"Böcker","first_name":"J.","full_name":"Böcker, J."}],"year":2013,"ddc":["620"],"department":[{"_id":"DEP6020"}],"conference":{"name":"International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management","location":"Nürnberg","end_date":"2013-05-16","start_date":"2013-05-14"},"publisher":"VDE-Verl.","status":"public","page":"1639 - 1646","title":" Design and Practical Evaluation of a Power Regeneration : System for Voltage Source Converters","citation":{"short":"J. Austermann, H. Borcherding, J. Böcker, in: PCIM Europe (Ed.), Proceedings / PCIM Europe / International Exhibition and Conference for Power Electronics, Intelligent Motion Renewable Energy and Energy Management, Nuremberg, 14 - 16 May 2013. Organizer: Mesago PCM GmbH Stuttgart , VDE-Verl., Berlin, 2013, pp. 1639–1646.","chicago-de":"Austermann, Johann, Holger Borcherding und J. Böcker. 2013. Design and Practical Evaluation of a Power Regeneration : System for Voltage Source Converters. In: Proceedings / PCIM Europe / International Exhibition and Conference for Power Electronics, Intelligent Motion Renewable Energy and Energy Management, Nuremberg, 14 - 16 May 2013. Organizer: Mesago PCM GmbH Stuttgart , hg. von PCIM Europe, 1639–1646. Berlin: VDE-Verl.","din1505-2-1":"Austermann, Johann ; Borcherding, Holger ; Böcker, J.: Design and Practical Evaluation of a Power Regeneration : System for Voltage Source Converters. In: PCIM Europe (Hrsg.): Proceedings / PCIM Europe / International Exhibition and Conference for Power Electronics, Intelligent Motion Renewable Energy and Energy Management, Nuremberg, 14 - 16 May 2013. Organizer: Mesago PCM GmbH Stuttgart . Berlin : VDE-Verl., 2013, S. 1639–1646","van":"Austermann J, Borcherding H, Böcker J. Design and Practical Evaluation of a Power Regeneration : System for Voltage Source Converters. In: PCIM Europe, editor. Proceedings / PCIM Europe / International Exhibition and Conference for Power Electronics, Intelligent Motion Renewable Energy and Energy Management, Nuremberg, 14 - 16 May 2013 Organizer: Mesago PCM GmbH Stuttgart . Berlin: VDE-Verl.; 2013. p. 1639–46.","havard":"J. Austermann, H. Borcherding, J. Böcker, Design and Practical Evaluation of a Power Regeneration : System for Voltage Source Converters, in: PCIM Europe (Ed.), Proceedings / PCIM Europe / International Exhibition and Conference for Power Electronics, Intelligent Motion Renewable Energy and Energy Management, Nuremberg, 14 - 16 May 2013. Organizer: Mesago PCM GmbH Stuttgart , VDE-Verl., Berlin, 2013: pp. 1639–1646.","bjps":"Austermann J, Borcherding H and Böcker J (2013) Design and Practical Evaluation of a Power Regeneration : System for Voltage Source Converters. In PCIM Europe (ed.), Proceedings / PCIM Europe / International Exhibition and Conference for Power Electronics, Intelligent Motion Renewable Energy and Energy Management, Nuremberg, 14 - 16 May 2013. Organizer: Mesago PCM GmbH Stuttgart . Berlin: VDE-Verl., pp. 1639–1646.","mla":"Austermann, Johann, et al. “ Design and Practical Evaluation of a Power Regeneration : System for Voltage Source Converters.” Proceedings / PCIM Europe / International Exhibition and Conference for Power Electronics, Intelligent Motion Renewable Energy and Energy Management, Nuremberg, 14 - 16 May 2013. Organizer: Mesago PCM GmbH Stuttgart , edited by PCIM Europe, VDE-Verl., 2013, pp. 1639–46.","ufg":"Austermann, Johann et. al. (2013): Design and Practical Evaluation of a Power Regeneration : System for Voltage Source Converters, in: PCIM Europe (Hg.): Proceedings / PCIM Europe / International Exhibition and Conference for Power Electronics, Intelligent Motion Renewable Energy and Energy Management, Nuremberg, 14 - 16 May 2013. Organizer: Mesago PCM GmbH Stuttgart , Berlin, S. 1639–1646.","apa":"Austermann, J., Borcherding, H., & Böcker, J. (2013). Design and Practical Evaluation of a Power Regeneration : System for Voltage Source Converters. In PCIM Europe (Ed.), Proceedings / PCIM Europe / International Exhibition and Conference for Power Electronics, Intelligent Motion Renewable Energy and Energy Management, Nuremberg, 14 - 16 May 2013. Organizer: Mesago PCM GmbH Stuttgart (pp. 1639–1646). Berlin: VDE-Verl.","chicago":"Austermann, Johann, Holger Borcherding, and J. Böcker. “ Design and Practical Evaluation of a Power Regeneration : System for Voltage Source Converters.” In Proceedings / PCIM Europe / International Exhibition and Conference for Power Electronics, Intelligent Motion Renewable Energy and Energy Management, Nuremberg, 14 - 16 May 2013. Organizer: Mesago PCM GmbH Stuttgart , edited by PCIM Europe, 1639–46. Berlin: VDE-Verl., 2013.","ama":"Austermann J, Borcherding H, Böcker J. Design and Practical Evaluation of a Power Regeneration : System for Voltage Source Converters. In: PCIM Europe, ed. Proceedings / PCIM Europe / International Exhibition and Conference for Power Electronics, Intelligent Motion Renewable Energy and Energy Management, Nuremberg, 14 - 16 May 2013. Organizer: Mesago PCM GmbH Stuttgart . Berlin: VDE-Verl.; 2013:1639-1646.","ieee":"J. Austermann, H. Borcherding, and J. Böcker, “ Design and Practical Evaluation of a Power Regeneration : System for Voltage Source Converters,” in Proceedings / PCIM Europe / International Exhibition and Conference for Power Electronics, Intelligent Motion Renewable Energy and Energy Management, Nuremberg, 14 - 16 May 2013. Organizer: Mesago PCM GmbH Stuttgart , Nürnberg, 2013, pp. 1639–1646."},"publication_status":"published","_id":"4896","place":"Berlin","keyword":["Automatisierungstechnik"],"language":[{"iso":"eng"}],"publication":"Proceedings / PCIM Europe / International Exhibition and Conference for Power Electronics, Intelligent Motion Renewable Energy and Energy Management, Nuremberg, 14 - 16 May 2013. Organizer: Mesago PCM GmbH Stuttgart ","publication_identifier":{"isbn":["978-3-8007-4186-1"]},"type":"conference","date_created":"2018-11-20T13:54:12Z","corporate_editor":["PCIM Europe"],"user_id":"74004","date_updated":"2023-03-15T13:49:56Z"},{"page":"Kapitel 2C: 2.49-2.82","status":"public","publisher":"Beuth","department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"year":2013,"author":[{"orcid":"0000-0002-8594-3168","last_name":"Pottgiesser","id":"27166","full_name":"Pottgiesser, Uta","first_name":"Uta"}],"publication_status":"published","citation":{"ama":"Pottgiesser U. Baukonstruktion - Innenausbau. In: Holschemacher K, ed. Entwurfs- und Konstruktionstafeln für Architekten. 6., vollst. überarb. Aufl. Berlin: Beuth; 2013:Kapitel 2C: 2.49-2.82.","ieee":"U. Pottgiesser, “Baukonstruktion - Innenausbau,” in Entwurfs- und Konstruktionstafeln für Architekten, 6., vollst. überarb. Aufl., K. Holschemacher, Ed. Berlin: Beuth, 2013, p. Kapitel 2C: 2.49-2.82.","ufg":"Pottgiesser, Uta (2013): Baukonstruktion - Innenausbau, in: Klaus Holschemacher (Hg.): Entwurfs- und Konstruktionstafeln für Architekten, Berlin, 6., vollst. überarb. Aufl., S. Kapitel 2C: 2.49-2.82.","mla":"Pottgiesser, Uta. “Baukonstruktion - Innenausbau.” Entwurfs- und Konstruktionstafeln für Architekten, edited by Klaus Holschemacher, 6., vollst. überarb. Aufl., Beuth, 2013, p. Kapitel 2C: 2.49-2.82.","bjps":"Pottgiesser U (2013) Baukonstruktion - Innenausbau. In Holschemacher K (ed.), Entwurfs- und Konstruktionstafeln für Architekten, 6., vollst. überarb. Aufl. Berlin: Beuth, p. Kapitel 2C: 2.49-2.82.","havard":"U. Pottgiesser, Baukonstruktion - Innenausbau, in: K. Holschemacher (Ed.), Entwurfs- und Konstruktionstafeln für Architekten, 6., vollst. überarb. Aufl., Beuth, Berlin, 2013: p. Kapitel 2C: 2.49-2.82.","van":"Pottgiesser U. Baukonstruktion - Innenausbau. In: Holschemacher K, editor. Entwurfs- und Konstruktionstafeln für Architekten. 6., vollst. überarb. Aufl. Berlin: Beuth; 2013. p. Kapitel 2C: 2.49-2.82.","chicago":"Pottgiesser, Uta. “Baukonstruktion - Innenausbau.” In Entwurfs- und Konstruktionstafeln für Architekten, edited by Klaus Holschemacher, 6., vollst. überarb. Aufl., Kapitel 2C: 2.49-2.82. Berlin: Beuth, 2013.","apa":"Pottgiesser, U. (2013). Baukonstruktion - Innenausbau. In K. Holschemacher (Ed.), Entwurfs- und Konstruktionstafeln für Architekten (6., vollst. überarb. Aufl., p. Kapitel 2C: 2.49-2.82). Berlin: Beuth.","chicago-de":"Pottgiesser, Uta. 2013. Baukonstruktion - Innenausbau. In: Entwurfs- und Konstruktionstafeln für Architekten, hg. von Klaus Holschemacher, Kapitel 2C: 2.49-2.82. 6., vollst. überarb. Aufl. Berlin: Beuth.","din1505-2-1":"Pottgiesser, Uta: Baukonstruktion - Innenausbau. In: Holschemacher, K. (Hrsg.): Entwurfs- und Konstruktionstafeln für Architekten. 6., vollst. überarb. Aufl. Berlin : Beuth, 2013, S. Kapitel 2C: 2.49-2.82","short":"U. Pottgiesser, in: K. Holschemacher (Ed.), Entwurfs- und Konstruktionstafeln für Architekten, 6., vollst. überarb. Aufl., Beuth, Berlin, 2013, p. Kapitel 2C: 2.49-2.82."},"title":"Baukonstruktion - Innenausbau","language":[{"iso":"ger"}],"place":"Berlin","_id":"5228","date_updated":"2023-03-15T13:49:58Z","user_id":"45673","editor":[{"first_name":"Klaus","full_name":"Holschemacher, Klaus","last_name":"Holschemacher"}],"type":"book_chapter","date_created":"2021-03-04T15:22:37Z","publication":"Entwurfs- und Konstruktionstafeln für Architekten","publication_identifier":{"eisbn":["978-3-410-23285-8"],"isbn":["978-3-410-23284-1"]},"edition":"6., vollst. überarb. Aufl."},{"language":[{"iso":"ger"}],"place":"Berlin","_id":"5229","date_updated":"2023-03-15T13:49:58Z","user_id":"45673","intvolume":" 90","date_created":"2021-03-04T15:30:35Z","type":"journal_article","publication":"Sonderheft: Innovative Fassadentechnik 2013 ; Erschienen in: Bautechnik : Zeitschrift für den gesamten Ingenieurbau","publication_identifier":{"eissn":["1437-0999"],"issn":["0932-8351"]},"page":"6-10","status":"public","department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"year":2013,"author":[{"first_name":"Uta","full_name":"Pottgiesser, Uta","last_name":"Pottgiesser","id":"27166","orcid":"0000-0002-8594-3168"},{"id":"49047","full_name":"Ashour, Anan","last_name":"Ashour","first_name":"Anan"}],"issue":"9","publication_status":"published","citation":{"chicago-de":"Pottgiesser, Uta und Anan Ashour. 2013. Design vs. Development : neue Ansätze. Sonderheft: Innovative Fassadentechnik 2013 ; Erschienen in: Bautechnik : Zeitschrift für den gesamten Ingenieurbau 90, Nr. 9: 6–10.","din1505-2-1":"Pottgiesser, Uta ; Ashour, Anan: Design vs. Development : neue Ansätze. In: Sonderheft: Innovative Fassadentechnik 2013 ; Erschienen in: Bautechnik : Zeitschrift für den gesamten Ingenieurbau Bd. 90. Berlin (2013), Nr. 9, S. 6–10","short":"U. Pottgiesser, A. Ashour, Sonderheft: Innovative Fassadentechnik 2013 ; Erschienen in: Bautechnik : Zeitschrift für den gesamten Ingenieurbau 90 (2013) 6–10.","chicago":"Pottgiesser, Uta, and Anan Ashour. “Design vs. Development : neue Ansätze.” Sonderheft: Innovative Fassadentechnik 2013 ; Erschienen in: Bautechnik : Zeitschrift für den gesamten Ingenieurbau 90, no. 9 (2013): 6–10.","ieee":"U. Pottgiesser and A. Ashour, “Design vs. Development : neue Ansätze,” Sonderheft: Innovative Fassadentechnik 2013 ; Erschienen in: Bautechnik : Zeitschrift für den gesamten Ingenieurbau, vol. 90, no. 9, pp. 6–10, 2013.","apa":"Pottgiesser, U., & Ashour, A. (2013). Design vs. Development : neue Ansätze. Sonderheft: Innovative Fassadentechnik 2013 ; Erschienen in: Bautechnik : Zeitschrift für den gesamten Ingenieurbau, 90(9), 6–10.","havard":"U. Pottgiesser, A. Ashour, Design vs. Development : neue Ansätze, Sonderheft: Innovative Fassadentechnik 2013 ; Erschienen in: Bautechnik : Zeitschrift für den gesamten Ingenieurbau. 90 (2013) 6–10.","mla":"Pottgiesser, Uta, and Anan Ashour. “Design vs. Development : neue Ansätze.” Sonderheft: Innovative Fassadentechnik 2013 ; Erschienen in: Bautechnik : Zeitschrift für den gesamten Ingenieurbau, vol. 90, no. 9, 2013, pp. 6–10.","bjps":"Pottgiesser U and Ashour A (2013) Design vs. Development : neue Ansätze. Sonderheft: Innovative Fassadentechnik 2013 ; Erschienen in: Bautechnik : Zeitschrift für den gesamten Ingenieurbau 90, 6–10.","ufg":"Pottgiesser, Uta/Ashour, Anan (2013): Design vs. Development : neue Ansätze, in: Sonderheft: Innovative Fassadentechnik 2013 ; Erschienen in: Bautechnik : Zeitschrift für den gesamten Ingenieurbau 90 (9), S. 6–10.","ama":"Pottgiesser U, Ashour A. Design vs. Development : neue Ansätze. Sonderheft: Innovative Fassadentechnik 2013 ; Erschienen in: Bautechnik : Zeitschrift für den gesamten Ingenieurbau. 2013;90(9):6-10.","van":"Pottgiesser U, Ashour A. Design vs. Development : neue Ansätze. Sonderheft: Innovative Fassadentechnik 2013 ; Erschienen in: Bautechnik : Zeitschrift für den gesamten Ingenieurbau. 2013;90(9):6–10."},"volume":90,"title":"Design vs. Development : neue Ansätze"},{"user_id":"45673","date_updated":"2023-03-15T13:49:58Z","intvolume":" 8","publication_identifier":{"issn":["0973-8339"]},"publication":"Abacus","date_created":"2021-03-04T15:45:35Z","type":"journal_article","language":[{"iso":"eng"}],"_id":"5230","citation":{"ieee":"C. Kabre and U. Pottgiesser, “Education for sustainable architecture : experiences from a transnational desgin studio,” Abacus, vol. 8, no. 2, 2013.","ama":"Kabre C, Pottgiesser U. Education for sustainable architecture : experiences from a transnational desgin studio. Abacus. 2013;8(2).","apa":"Kabre, C., & Pottgiesser, U. (2013). Education for sustainable architecture : experiences from a transnational desgin studio. Abacus, 8(2).","chicago":"Kabre, Chitra, and Uta Pottgiesser. “Education for Sustainable Architecture : Experiences from a Transnational Desgin Studio.” Abacus 8, no. 2 (2013).","van":"Kabre C, Pottgiesser U. Education for sustainable architecture : experiences from a transnational desgin studio. Abacus. 2013;8(2).","ufg":"Kabre, Chitra/Pottgiesser, Uta (2013): Education for sustainable architecture : experiences from a transnational desgin studio, in: Abacus 8 (2).","bjps":"Kabre C and Pottgiesser U (2013) Education for Sustainable Architecture : Experiences from a Transnational Desgin Studio. Abacus 8.","havard":"C. Kabre, U. Pottgiesser, Education for sustainable architecture : experiences from a transnational desgin studio, Abacus. 8 (2013).","mla":"Kabre, Chitra, and Uta Pottgiesser. “Education for Sustainable Architecture : Experiences from a Transnational Desgin Studio.” Abacus, vol. 8, no. 2, 2013.","short":"C. Kabre, U. Pottgiesser, Abacus 8 (2013).","chicago-de":"Kabre, Chitra und Uta Pottgiesser. 2013. Education for sustainable architecture : experiences from a transnational desgin studio. Abacus 8, Nr. 2.","din1505-2-1":"Kabre, Chitra ; Pottgiesser, Uta: Education for sustainable architecture : experiences from a transnational desgin studio. In: Abacus Bd. 8 (2013), Nr. 2"},"volume":8,"title":"Education for sustainable architecture : experiences from a transnational desgin studio","status":"public","quality_controlled":"1","year":2013,"author":[{"first_name":"Chitra","last_name":"Kabre","full_name":"Kabre, Chitra"},{"orcid":"0000-0002-8594-3168","id":"27166","full_name":"Pottgiesser, Uta","first_name":"Uta","last_name":"Pottgiesser"}],"department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"issue":"2"},{"_id":"5231","language":[{"iso":"eng"}],"place":" Detmold ","editor":[{"orcid":"0000-0002-8594-3168","id":"27166","first_name":"Uta","last_name":"Pottgiesser","full_name":"Pottgiesser, Uta"},{"last_name":"Knaack","first_name":"Ulrich","id":"27160","full_name":"Knaack, Ulrich"},{"first_name":"Jan-Hendrik","last_name":"Böke","id":"66462","full_name":"Böke, Jan-Hendrik"}],"date_updated":"2023-03-15T13:49:58Z","user_id":"45673","date_created":"2021-03-05T09:36:52Z","type":"conference_editor","publication_identifier":{"isbn":[" 978-3-939349-21-1 "]},"publisher":" Hochschule Ostwestfalen-Lippe","page":"249","status":"public","department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"conference":{"location":"Detmold"},"year":2013,"publication_status":"published","citation":{"ieee":"U. Pottgiesser, U. Knaack, and J.-H. Böke, Eds., facade2013 - design vs. development. Detmold : Hochschule Ostwestfalen-Lippe, 2013, p. 249.","ama":"Pottgiesser U, Knaack U, Böke J-H, eds. Facade2013 - Design vs. Development. Detmold : Hochschule Ostwestfalen-Lippe; 2013:249.","apa":"Pottgiesser, U., Knaack, U., & Böke, J.-H. (Eds.). (2013). facade2013 - design vs. development (p. 249). Detmold : Hochschule Ostwestfalen-Lippe.","chicago":"Pottgiesser, Uta, Ulrich Knaack, and Jan-Hendrik Böke, eds. Facade2013 - Design vs. Development. Detmold : Hochschule Ostwestfalen-Lippe, 2013.","van":"Pottgiesser U, Knaack U, Böke J-H, editors. facade2013 - design vs. development. Detmold : Hochschule Ostwestfalen-Lippe; 2013.","bjps":"Pottgiesser U, Knaack U and Böke J-H (eds) (2013) Facade2013 - Design vs. Development. Detmold : Hochschule Ostwestfalen-Lippe.","havard":"U. Pottgiesser, U. Knaack, J.-H. Böke, eds., facade2013 - design vs. development, Hochschule Ostwestfalen-Lippe, Detmold , 2013.","mla":"Pottgiesser, Uta, et al., editors. Facade2013 - Design vs. Development. Hochschule Ostwestfalen-Lippe, 2013, p. 249.","ufg":"Pottgiesser, Uta et. al. (Hgg.) (2013): facade2013 - design vs. development, Detmold .","short":"U. Pottgiesser, U. Knaack, J.-H. Böke, eds., Facade2013 - Design vs. Development, Hochschule Ostwestfalen-Lippe, Detmold , 2013.","chicago-de":"Pottgiesser, Uta, Ulrich Knaack und Jan-Hendrik Böke, Hrsg. 2013. facade2013 - design vs. development. Detmold : Hochschule Ostwestfalen-Lippe.","din1505-2-1":"Pottgiesser, U. ; Knaack, U. ; Böke, J.-H. (Hrsg.): facade2013 - design vs. development. Detmold : Hochschule Ostwestfalen-Lippe, 2013"},"title":"facade2013 - design vs. development"},{"user_id":"45673","type":"book_chapter","place":"India","doi":"10.1007/978-81-322-0792-4_9","_id":"5232","publication_status":"published","quality_controlled":"1","publisher":"Springer","department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"abstract":[{"lang":"eng","text":"The tremendous population growth and the booming economy in India have a lot of critical impacts on energy demand, consumption, and supply in the next decades. Natural resources as well in India are limited, but particularly the growing middle class with increasing incomes wants to improve their quality of life. This contradiction can only be solved with a strategic energy efficiency scheme in India. This chapter deals with the threats and opportunities of the building development in the next decades. Today, 40 % of the total energy consumption worldwide is covered by residential and nonresidential buildings. Energy- and cost-efficient design, material use, and maintenance of old and new buildings interwoven with higher user mobility are crucial points of smart cities in the future. Therefore, education, particularly higher education; R&D; and climate-related innovations are the main drivers for a better quality of life and for the more participation in fighting against the climate change. In an ongoing user study in five big Indian cities, we want to explore the awareness of the Indian people in urban areas between the contradictory contexts of energy consumption and the needs and expectations of comfortable living."}],"date_updated":"2023-03-15T13:49:58Z","editor":[{"full_name":"Akhilesh, K:B:","last_name":"Akhilesh","first_name":"K:B:"}],"date_created":"2021-03-05T09:44:07Z","publication":"Emerging Dimensions of Technology Management","publication_identifier":{"isbn":["978-81-322-0791-7"],"eisbn":["978-81-322-0792-4"]},"language":[{"iso":"eng"}],"keyword":["Corporate Social Responsibility","Energy Efficiency","Building Stock","Sustainable Consumption","Global Institute"],"citation":{"van":"Doleschal R, Pottgiesser U. Innovation and Implementation of Climate-Related Energy-Efficient Building Design in India. In: Akhilesh K, editor. Emerging Dimensions of Technology Management. India: Springer; 2013. p. 121–34.","ama":"Doleschal R, Pottgiesser U. Innovation and Implementation of Climate-Related Energy-Efficient Building Design in India. In: Akhilesh K, ed. Emerging Dimensions of Technology Management. India: Springer; 2013:121-134. doi:10.1007/978-81-322-0792-4_9","ufg":"Doleschal, Reinhard/Pottgiesser, Uta (2013): Innovation and Implementation of Climate-Related Energy-Efficient Building Design in India, in: K:B: Akhilesh (Hg.): Emerging Dimensions of Technology Management, India, S. 121–134.","havard":"R. Doleschal, U. Pottgiesser, Innovation and Implementation of Climate-Related Energy-Efficient Building Design in India, in: K. Akhilesh (Ed.), Emerging Dimensions of Technology Management, Springer, India, 2013: pp. 121–134.","bjps":"Doleschal R and Pottgiesser U (2013) Innovation and Implementation of Climate-Related Energy-Efficient Building Design in India. In Akhilesh K (ed.), Emerging Dimensions of Technology Management. India: Springer, pp. 121–134.","mla":"Doleschal, Reinhard, and Uta Pottgiesser. “Innovation and Implementation of Climate-Related Energy-Efficient Building Design in India.” Emerging Dimensions of Technology Management, edited by K:B: Akhilesh, Springer, 2013, pp. 121–34, doi:10.1007/978-81-322-0792-4_9.","apa":"Doleschal, R., & Pottgiesser, U. (2013). Innovation and Implementation of Climate-Related Energy-Efficient Building Design in India. In K. Akhilesh (Ed.), Emerging Dimensions of Technology Management (pp. 121–134). India: Springer. https://doi.org/10.1007/978-81-322-0792-4_9","ieee":"R. Doleschal and U. Pottgiesser, “Innovation and Implementation of Climate-Related Energy-Efficient Building Design in India,” in Emerging Dimensions of Technology Management, K. Akhilesh, Ed. India: Springer, 2013, pp. 121–134.","chicago":"Doleschal, Reinhard, and Uta Pottgiesser. “Innovation and Implementation of Climate-Related Energy-Efficient Building Design in India.” In Emerging Dimensions of Technology Management, edited by K:B: Akhilesh, 121–34. India: Springer, 2013. https://doi.org/10.1007/978-81-322-0792-4_9.","short":"R. Doleschal, U. Pottgiesser, in: K. Akhilesh (Ed.), Emerging Dimensions of Technology Management, Springer, India, 2013, pp. 121–134.","din1505-2-1":"Doleschal, Reinhard ; Pottgiesser, Uta: Innovation and Implementation of Climate-Related Energy-Efficient Building Design in India. In: Akhilesh, K. (Hrsg.): Emerging Dimensions of Technology Management. India : Springer, 2013, S. 121–134","chicago-de":"Doleschal, Reinhard und Uta Pottgiesser. 2013. Innovation and Implementation of Climate-Related Energy-Efficient Building Design in India. In: Emerging Dimensions of Technology Management, hg. von K:B: Akhilesh, 121–134. India: Springer. doi:10.1007/978-81-322-0792-4_9, ."},"title":"Innovation and Implementation of Climate-Related Energy-Efficient Building Design in India","page":"121-134","status":"public","author":[{"first_name":"Reinhard","full_name":"Doleschal, Reinhard","last_name":"Doleschal","id":"14632"},{"id":"27166","first_name":"Uta","full_name":"Pottgiesser, Uta","last_name":"Pottgiesser","orcid":"0000-0002-8594-3168"}],"year":2013},{"_id":"5233","place":"Basel ","language":[{"iso":"eng"}],"publication_identifier":{"eisbn":["978-3-0346-0882-4 "],"isbn":["978-3-0346-0841-1"]},"date_created":"2021-03-05T09:48:45Z","type":"book","user_id":"45673","date_updated":"2023-03-15T13:49:58Z","year":2013,"author":[{"full_name":"Pottgiesser, Uta","id":"27166","first_name":"Uta","last_name":"Pottgiesser","orcid":"0000-0002-8594-3168"},{"last_name":"Strauß","full_name":"Strauß, Holger","first_name":"Holger"}],"department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"publisher":"Birkhäuser Verlag ","status":"public","page":" 176 ","title":" Product Development and Architecture. Visions, Methods, Innovations ","citation":{"chicago-de":"Pottgiesser, Uta und Holger Strauß. 2013. Product Development and Architecture. Visions, Methods, Innovations . Basel : Birkhäuser Verlag .","din1505-2-1":"Pottgiesser, Uta ; Strauß, Holger: Product Development and Architecture. Visions, Methods, Innovations . Basel : Birkhäuser Verlag , 2013","short":"U. Pottgiesser, H. Strauß, Product Development and Architecture. Visions, Methods, Innovations , Birkhäuser Verlag , Basel , 2013.","chicago":"Pottgiesser, Uta, and Holger Strauß. Product Development and Architecture. Visions, Methods, Innovations . Basel : Birkhäuser Verlag , 2013.","apa":"Pottgiesser, U., & Strauß, H. (2013). Product Development and Architecture. Visions, Methods, Innovations . Basel : Birkhäuser Verlag .","ieee":"U. Pottgiesser and H. Strauß, Product Development and Architecture. Visions, Methods, Innovations . Basel : Birkhäuser Verlag , 2013.","ufg":"Pottgiesser, Uta/Strauß, Holger (2013): Product Development and Architecture. Visions, Methods, Innovations , Basel .","havard":"U. Pottgiesser, H. Strauß, Product Development and Architecture. Visions, Methods, Innovations , Birkhäuser Verlag , Basel , 2013.","bjps":"Pottgiesser U and Strauß H (2013) Product Development and Architecture. Visions, Methods, Innovations . Basel : Birkhäuser Verlag .","mla":"Pottgiesser, Uta, and Holger Strauß. Product Development and Architecture. Visions, Methods, Innovations . Birkhäuser Verlag , 2013.","van":"Pottgiesser U, Strauß H. Product Development and Architecture. Visions, Methods, Innovations . Basel : Birkhäuser Verlag ; 2013. 176 p.","ama":"Pottgiesser U, Strauß H. Product Development and Architecture. Visions, Methods, Innovations . Basel : Birkhäuser Verlag ; 2013."},"publication_status":"published"},{"status":"public","page":"389","publisher":"DOM Publishers","year":2013,"author":[{"orcid":"0000-0002-8594-3168","full_name":"Pottgiesser, Uta","first_name":"Uta","last_name":"Pottgiesser","id":"27166"},{"id":"45668","full_name":"Wiewiorra, Carsten","last_name":"Wiewiorra","first_name":"Carsten"}],"department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"citation":{"chicago":"Pottgiesser, Uta, and Carsten Wiewiorra. Entwurfs- und Planungshilfe: Raumbildender Ausbau. Berlin : DOM Publishers, 2013.","apa":"Pottgiesser, U., & Wiewiorra, C. (2013). Entwurfs- und Planungshilfe: Raumbildender Ausbau. Berlin : DOM Publishers.","ufg":"Pottgiesser, Uta/Wiewiorra, Carsten (2013): Entwurfs- und Planungshilfe: Raumbildender Ausbau, Berlin .","havard":"U. Pottgiesser, C. Wiewiorra, Entwurfs- und Planungshilfe: Raumbildender Ausbau, DOM Publishers, Berlin , 2013.","mla":"Pottgiesser, Uta, and Carsten Wiewiorra. Entwurfs- und Planungshilfe: Raumbildender Ausbau. DOM Publishers, 2013.","bjps":"Pottgiesser U and Wiewiorra C (2013) Entwurfs- und Planungshilfe: Raumbildender Ausbau. Berlin : DOM Publishers.","van":"Pottgiesser U, Wiewiorra C. Entwurfs- und Planungshilfe: Raumbildender Ausbau. Berlin : DOM Publishers; 2013. 389 p.","chicago-de":"Pottgiesser, Uta und Carsten Wiewiorra. 2013. Entwurfs- und Planungshilfe: Raumbildender Ausbau. Berlin : DOM Publishers.","din1505-2-1":"Pottgiesser, Uta ; Wiewiorra, Carsten: Entwurfs- und Planungshilfe: Raumbildender Ausbau. Berlin : DOM Publishers, 2013","short":"U. Pottgiesser, C. Wiewiorra, Entwurfs- und Planungshilfe: Raumbildender Ausbau, DOM Publishers, Berlin , 2013.","ieee":"U. Pottgiesser and C. Wiewiorra, Entwurfs- und Planungshilfe: Raumbildender Ausbau. Berlin : DOM Publishers, 2013.","ama":"Pottgiesser U, Wiewiorra C. Entwurfs- und Planungshilfe: Raumbildender Ausbau. Berlin : DOM Publishers; 2013."},"publication_status":"published","title":"Entwurfs- und Planungshilfe: Raumbildender Ausbau","place":"Berlin ","keyword":["Innenausbau","Innenarchitektur"],"language":[{"iso":"ger"}],"_id":"5242","user_id":"45673","date_updated":"2023-03-15T13:49:58Z","publication_identifier":{"isbn":["978-3-86922-155-7"]},"type":"book","date_created":"2021-03-05T11:11:19Z"},{"place":" Leinfelden-Echterdingen","language":[{"iso":"ger"}],"_id":"5258","user_id":"45673","date_updated":"2023-03-15T13:49:58Z","publication_identifier":{"issn":[" 0173-8046 "]},"publication":"AIT : Architektur, Innenarchitektur, technischer Ausbau","type":"journal_article","date_created":"2021-03-08T14:14:23Z","status":"public","page":"150-153","publisher":"Verlagsanstalt Alexander Koch GmbH","year":2013,"author":[{"orcid":"0000-0002-8594-3168","full_name":"Pottgiesser, Uta","id":"27166","first_name":"Uta","last_name":"Pottgiesser"},{"last_name":"Kirch","full_name":"Kirch, Christoph","first_name":"Christoph"}],"department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"issue":"10","citation":{"apa":"Pottgiesser, U., & Kirch, C. (2013). ACOUSTIC : Raumakustische Systeme für Büro-, Gewerbe- und Industriebauten im Vergleich. AIT : Architektur, Innenarchitektur, technischer Ausbau, (10), 150–153.","chicago":"Pottgiesser, Uta, and Christoph Kirch. “ACOUSTIC : Raumakustische Systeme für Büro-, Gewerbe- und Industriebauten im Vergleich.” AIT : Architektur, Innenarchitektur, technischer Ausbau, no. 10 (2013): 150–53.","van":"Pottgiesser U, Kirch C. ACOUSTIC : Raumakustische Systeme für Büro-, Gewerbe- und Industriebauten im Vergleich. AIT : Architektur, Innenarchitektur, technischer Ausbau. 2013;(10):150–3.","bjps":"Pottgiesser U and Kirch C (2013) ACOUSTIC : Raumakustische Systeme für Büro-, Gewerbe- und Industriebauten im Vergleich. AIT : Architektur, Innenarchitektur, technischer Ausbau 150–153.","mla":"Pottgiesser, Uta, and Christoph Kirch. “ACOUSTIC : Raumakustische Systeme für Büro-, Gewerbe- und Industriebauten im Vergleich.” AIT : Architektur, Innenarchitektur, technischer Ausbau, no. 10, Verlagsanstalt Alexander Koch GmbH, 2013, pp. 150–53.","havard":"U. Pottgiesser, C. Kirch, ACOUSTIC : Raumakustische Systeme für Büro-, Gewerbe- und Industriebauten im Vergleich, AIT : Architektur, Innenarchitektur, technischer Ausbau. (2013) 150–153.","ufg":"Pottgiesser, Uta/Kirch, Christoph (2013): ACOUSTIC : Raumakustische Systeme für Büro-, Gewerbe- und Industriebauten im Vergleich, in: AIT : Architektur, Innenarchitektur, technischer Ausbau (10), S. 150–153.","short":"U. Pottgiesser, C. Kirch, AIT : Architektur, Innenarchitektur, technischer Ausbau (2013) 150–153.","chicago-de":"Pottgiesser, Uta und Christoph Kirch. 2013. ACOUSTIC : Raumakustische Systeme für Büro-, Gewerbe- und Industriebauten im Vergleich. AIT : Architektur, Innenarchitektur, technischer Ausbau, Nr. 10: 150–153.","din1505-2-1":"Pottgiesser, Uta ; Kirch, Christoph: ACOUSTIC : Raumakustische Systeme für Büro-, Gewerbe- und Industriebauten im Vergleich. In: AIT : Architektur, Innenarchitektur, technischer Ausbau. Leinfelden-Echterdingen, Verlagsanstalt Alexander Koch GmbH (2013), Nr. 10, S. 150–153","ieee":"U. Pottgiesser and C. Kirch, “ACOUSTIC : Raumakustische Systeme für Büro-, Gewerbe- und Industriebauten im Vergleich,” AIT : Architektur, Innenarchitektur, technischer Ausbau, no. 10, pp. 150–153, 2013.","ama":"Pottgiesser U, Kirch C. ACOUSTIC : Raumakustische Systeme für Büro-, Gewerbe- und Industriebauten im Vergleich. AIT : Architektur, Innenarchitektur, technischer Ausbau. 2013;(10):150-153."},"publication_status":"published","title":"ACOUSTIC : Raumakustische Systeme für Büro-, Gewerbe- und Industriebauten im Vergleich"},{"title":"Kochpökelwaren – Technologie und Beurteilungskonzepte","citation":{"ama":"Stiebing A. Kochpökelwaren – Technologie und Beurteilungskonzepte. In: ; 2013.","ieee":"A. Stiebing, “Kochpökelwaren – Technologie und Beurteilungskonzepte,” presented at the GDCh-Fortbildungsseminar, Lemgo, 2013.","short":"A. Stiebing, in: 2013.","chicago-de":"Stiebing, Achim. 2013. Kochpökelwaren – Technologie und Beurteilungskonzepte. In: .","din1505-2-1":"Stiebing, Achim: Kochpökelwaren – Technologie und Beurteilungskonzepte. In: , 2013","van":"Stiebing A. Kochpökelwaren – Technologie und Beurteilungskonzepte. In 2013.","ufg":"Stiebing, Achim (2013): Kochpökelwaren – Technologie und Beurteilungskonzepte, in: .","mla":"Stiebing, Achim. Kochpökelwaren – Technologie und Beurteilungskonzepte. 2013.","bjps":"Stiebing A (2013) Kochpökelwaren – Technologie und Beurteilungskonzepte.","havard":"A. Stiebing, Kochpökelwaren – Technologie und Beurteilungskonzepte, in: 2013.","apa":"Stiebing, A. (2013). Kochpökelwaren – Technologie und Beurteilungskonzepte. Presented at the GDCh-Fortbildungsseminar, Lemgo.","chicago":"Stiebing, Achim. “Kochpökelwaren – Technologie und Beurteilungskonzepte,” 2013."},"department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"conference":{"location":"Lemgo","name":"GDCh-Fortbildungsseminar","start_date":"2013-04-10","end_date":"2013-04-10"},"year":2013,"author":[{"full_name":"Stiebing, Achim","last_name":"Stiebing","id":"12235","first_name":"Achim"}],"status":"public","date_created":"2021-03-31T08:47:30Z","type":"conference","date_updated":"2023-03-15T13:49:59Z","user_id":"79260","_id":"5380","language":[{"iso":"ger"}]},{"author":[{"full_name":"Müller, Ulrich","id":"12119","first_name":"Ulrich","last_name":"Müller"}],"year":2013,"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"conference":{"name":"10. Trierer Lebensmitteltag ","location":"Hochschule Trier","end_date":"2013-05-24","start_date":"2013-05-24"},"status":"public","title":"Wasser - der kalte Entzug - Dynamische Gefriertrocknung","citation":{"chicago-de":"Müller, Ulrich. 2013. Wasser - der kalte Entzug - Dynamische Gefriertrocknung. In: .","din1505-2-1":"Müller, Ulrich: Wasser - der kalte Entzug - Dynamische Gefriertrocknung. In: , 2013","short":"U. Müller, in: 2013.","ufg":"Müller, Ulrich (2013): Wasser - der kalte Entzug - Dynamische Gefriertrocknung, in: .","mla":"Müller, Ulrich. Wasser - der kalte Entzug - Dynamische Gefriertrocknung. 2013.","bjps":"Müller U (2013) Wasser - der kalte Entzug - Dynamische Gefriertrocknung.","havard":"U. Müller, Wasser - der kalte Entzug - Dynamische Gefriertrocknung, in: 2013.","van":"Müller U. Wasser - der kalte Entzug - Dynamische Gefriertrocknung. In 2013.","chicago":"Müller, Ulrich. “Wasser - der kalte Entzug - Dynamische Gefriertrocknung,” 2013.","apa":"Müller, U. (2013). Wasser - der kalte Entzug - Dynamische Gefriertrocknung. Presented at the 10. Trierer Lebensmitteltag , Hochschule Trier.","ama":"Müller U. Wasser - der kalte Entzug - Dynamische Gefriertrocknung. In: ; 2013.","ieee":"U. Müller, “Wasser - der kalte Entzug - Dynamische Gefriertrocknung,” presented at the 10. Trierer Lebensmitteltag , Hochschule Trier, 2013."},"keyword":["Vortrag"],"language":[{"iso":"ger"}],"_id":"5381","date_created":"2021-03-31T08:52:24Z","type":"conference","user_id":"74222","date_updated":"2023-03-15T13:49:59Z"},{"date_created":"2021-03-31T08:59:38Z","type":"conference","user_id":"83779","date_updated":"2024-05-24T07:02:05Z","_id":"5382","language":[{"iso":"eng"}],"title":"Time-Temperature Integrator for the Flash Pasteurisation","citation":{"havard":"J. Schneider, K. Schwarzer, A. Dammann_, U. Müller, Time-Temperature Integrator for the Flash Pasteurisation, in: 2013.","mla":"Schneider, Jan, et al. Time-Temperature Integrator for the Flash Pasteurisation. 2013.","bjps":"Schneider J et al. (2013) Time-Temperature Integrator for the Flash Pasteurisation.","ufg":"Schneider, Jan u. a.: Time-Temperature Integrator for the Flash Pasteurisation, in: o. Hg.: o. O. 2013.","ama":"Schneider J, Schwarzer K, Dammann_ A, Müller U. Time-Temperature Integrator for the Flash Pasteurisation. In: ; 2013.","van":"Schneider J, Schwarzer K, Dammann_ A, Müller U. Time-Temperature Integrator for the Flash Pasteurisation. In 2013.","chicago":"Schneider, Jan, Knut Schwarzer, Anna Dammann_, and Ulrich Müller. “Time-Temperature Integrator for the Flash Pasteurisation,” 2013.","ieee":"J. Schneider, K. Schwarzer, A. Dammann_, and U. Müller, “Time-Temperature Integrator for the Flash Pasteurisation,” presented at the 34th EBC Congress, Luxembourg (Lux), 2013.","apa":"Schneider, J., Schwarzer, K., Dammann_, A., & Müller, U. (2013). Time-Temperature Integrator for the Flash Pasteurisation. 34th EBC Congress, Luxembourg (Lux).","chicago-de":"Schneider, Jan, Knut Schwarzer, Anna Dammann_ und Ulrich Müller. 2013. Time-Temperature Integrator for the Flash Pasteurisation. In: .","din1505-2-1":"Schneider, Jan ; Schwarzer, Knut ; Dammann_, Anna ; Müller, Ulrich: Time-Temperature Integrator for the Flash Pasteurisation. In: , 2013","short":"J. Schneider, K. Schwarzer, A. Dammann_, U. Müller, in: 2013."},"author":[{"id":"13209","first_name":"Jan","last_name":"Schneider","full_name":"Schneider, Jan","orcid":"0000-0001-6401-8873"},{"id":"13329","first_name":"Knut","last_name":"Schwarzer","full_name":"Schwarzer, Knut"},{"first_name":"Anna","id":"43899","full_name":"Dammann_, Anna","last_name":"Dammann_"},{"first_name":"Ulrich","last_name":"Müller","full_name":"Müller, Ulrich","id":"12119"}],"year":"2013","department":[{"_id":"DEP4023"},{"_id":"DEP4009"},{"_id":"DEP4018"}],"conference":{"start_date":"2013-05-28","end_date":"2013-05-28","name":"34th EBC Congress","location":"Luxembourg (Lux)"},"status":"public"},{"_id":"5383","language":[{"iso":"eng"}],"date_updated":"2024-05-24T07:02:31Z","user_id":"83779","type":"conference","date_created":"2021-03-31T09:04:30Z","status":"public","conference":{"start_date":"2013-05-26","end_date":"2013-05-30","location":"Luxembourg (Lux)","name":"34th EBC Congress"},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"},{"_id":"DEP4018"}],"year":"2013","author":[{"full_name":"Schwarzer, Knut","first_name":"Knut","last_name":"Schwarzer","id":"13329"},{"last_name":"Dammann_","full_name":"Dammann_, Anna","id":"43899","first_name":"Anna"},{"id":"12119","first_name":"Ulrich","last_name":"Müller","full_name":"Müller, Ulrich"},{"orcid":"0000-0001-6401-8873","first_name":"Jan","full_name":"Schneider, Jan","last_name":"Schneider","id":"13209"}],"citation":{"ieee":"K. Schwarzer, A. Dammann_, U. Müller, and J. Schneider, “Critical view on the calculation of pasteurization units in beer,” presented at the 34th EBC Congress, Luxembourg (Lux), 2013.","ama":"Schwarzer K, Dammann_ A, Müller U, Schneider J. Critical view on the calculation of pasteurization units in beer. In: ; 2013.","apa":"Schwarzer, K., Dammann_, A., Müller, U., & Schneider, J. (2013). Critical view on the calculation of pasteurization units in beer. 34th EBC Congress, Luxembourg (Lux).","chicago":"Schwarzer, Knut, Anna Dammann_, Ulrich Müller, and Jan Schneider. “Critical View on the Calculation of Pasteurization Units in Beer,” 2013.","van":"Schwarzer K, Dammann_ A, Müller U, Schneider J. Critical view on the calculation of pasteurization units in beer. In 2013.","ufg":"Schwarzer, Knut u. a.: Critical view on the calculation of pasteurization units in beer, in: o. Hg.: o. O. 2013.","bjps":"Schwarzer K et al. (2013) Critical View on the Calculation of Pasteurization Units in Beer.","havard":"K. Schwarzer, A. Dammann_, U. Müller, J. Schneider, Critical view on the calculation of pasteurization units in beer, in: 2013.","mla":"Schwarzer, Knut, et al. Critical View on the Calculation of Pasteurization Units in Beer. 2013.","short":"K. Schwarzer, A. Dammann_, U. Müller, J. Schneider, in: 2013.","din1505-2-1":"Schwarzer, Knut ; Dammann_, Anna ; Müller, Ulrich ; Schneider, Jan: Critical view on the calculation of pasteurization units in beer. In: , 2013","chicago-de":"Schwarzer, Knut, Anna Dammann_, Ulrich Müller und Jan Schneider. 2013. Critical view on the calculation of pasteurization units in beer. In: ."},"title":"Critical view on the calculation of pasteurization units in beer"},{"publication_status":"published","issue":"5","department":[{"_id":"DEP4023"},{"_id":"DEP4026"}],"publisher":"Wiley-VCH","type":"journal_article","intvolume":" 67","user_id":"83781","doi":"https://doi.org/10.1002/lemi.201390053","_id":"5384","title":"Polyphenolgehalte in alten und neuen Apfelsorten","volume":67,"citation":{"ama":"Bernert T, Zapp J. Polyphenolgehalte in alten und neuen Apfelsorten. Lebensmittelchemie . 2013;67(5):S. 119. doi:https://doi.org/10.1002/lemi.201390053","ieee":"T. Bernert and J. Zapp, “Polyphenolgehalte in alten und neuen Apfelsorten,” Lebensmittelchemie , vol. 67, no. 5, p. S. 119, 2013, doi: https://doi.org/10.1002/lemi.201390053.","short":"T. Bernert, J. Zapp, Lebensmittelchemie 67 (2013) S. 119.","chicago-de":"Bernert, Till und Jürgen Zapp. 2013. Polyphenolgehalte in alten und neuen Apfelsorten. Lebensmittelchemie 67, Nr. 5: S. 119. doi:https://doi.org/10.1002/lemi.201390053, .","din1505-2-1":"Bernert, Till ; Zapp, Jürgen: Polyphenolgehalte in alten und neuen Apfelsorten. In: Lebensmittelchemie Bd. 67, Wiley-VCH (2013), Nr. 5, S. S. 119","van":"Bernert T, Zapp J. Polyphenolgehalte in alten und neuen Apfelsorten. Lebensmittelchemie . 2013;67(5):S. 119.","bjps":"Bernert T and Zapp J (2013) Polyphenolgehalte in alten und neuen Apfelsorten. Lebensmittelchemie 67, S. 119.","mla":"Bernert, Till, and Jürgen Zapp. “Polyphenolgehalte in alten und neuen Apfelsorten.” Lebensmittelchemie , vol. 67, no. 5, 2013, p. S. 119, https://doi.org/10.1002/lemi.201390053.","havard":"T. Bernert, J. Zapp, Polyphenolgehalte in alten und neuen Apfelsorten, Lebensmittelchemie . 67 (2013) S. 119.","ufg":"Bernert, Till/Zapp, Jürgen: Polyphenolgehalte in alten und neuen Apfelsorten, in: Lebensmittelchemie 67 (2013), H. 5, S. S. 119.","apa":"Bernert, T., & Zapp, J. (2013). Polyphenolgehalte in alten und neuen Apfelsorten. Lebensmittelchemie , 67(5), S. 119. https://doi.org/10.1002/lemi.201390053","chicago":"Bernert, Till, and Jürgen Zapp. “Polyphenolgehalte in alten und neuen Apfelsorten.” Lebensmittelchemie 67, no. 5 (2013): S. 119. https://doi.org/10.1002/lemi.201390053."},"year":"2013","author":[{"full_name":"Bernert, Till","first_name":"Till","id":"77407","last_name":"Bernert"},{"full_name":"Zapp, Jürgen","id":"12568","last_name":"Zapp","first_name":"Jürgen"}],"page":"S. 119","status":"public","date_created":"2021-03-31T09:09:48Z","publication_identifier":{"issn":["0937-1478"],"eissn":["1521-3811"]},"publication":"Lebensmittelchemie ","date_updated":"2024-05-21T06:59:58Z","language":[{"iso":"ger"}]},{"title":"Was ist erlaubt, was verboten? - 9. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost 2013 - Teil 1 ","citation":{"ufg":"Weyland, Gerd/Stiebing, Achim: Was ist erlaubt, was verboten? - 9. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost 2013 - Teil 1 , in: Fleischwirtschaft 93 93 (2013), H. 10, S. S. 81-83.","havard":"G. Weyland, A. Stiebing, Was ist erlaubt, was verboten? - 9. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost 2013 - Teil 1 , Fleischwirtschaft 93. 93 (2013) S. 81-83.","mla":"Weyland, Gerd, and Achim Stiebing. “Was ist erlaubt, was verboten? - 9. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost 2013 - Teil 1 .” Fleischwirtschaft 93, vol. 93, no. 10, 2013, p. S. 81-83.","bjps":"Weyland G and Stiebing A (2013) Was ist erlaubt, was verboten? - 9. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost 2013 - Teil 1 . Fleischwirtschaft 93 93, S. 81-83.","van":"Weyland G, Stiebing A. Was ist erlaubt, was verboten? - 9. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost 2013 - Teil 1 . Fleischwirtschaft 93. 2013;93(10):S. 81-83.","chicago":"Weyland, Gerd, and Achim Stiebing. “Was ist erlaubt, was verboten? - 9. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost 2013 - Teil 1 .” Fleischwirtschaft 93 93, no. 10 (2013): S. 81-83.","apa":"Weyland, G., & Stiebing, A. (2013). Was ist erlaubt, was verboten? - 9. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost 2013 - Teil 1 . Fleischwirtschaft 93, 93(10), S. 81-83.","chicago-de":"Weyland, Gerd und Achim Stiebing. 2013. Was ist erlaubt, was verboten? - 9. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost 2013 - Teil 1 . Fleischwirtschaft 93 93, Nr. 10: S. 81-83.","din1505-2-1":"Weyland, Gerd ; Stiebing, Achim: Was ist erlaubt, was verboten? - 9. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost 2013 - Teil 1 . In: Fleischwirtschaft 93 Bd. 93 (2013), Nr. 10, S. S. 81-83","short":"G. Weyland, A. Stiebing, Fleischwirtschaft 93 93 (2013) S. 81-83.","ama":"Weyland G, Stiebing A. Was ist erlaubt, was verboten? - 9. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost 2013 - Teil 1 . Fleischwirtschaft 93. 2013;93(10):S. 81-83.","ieee":"G. Weyland and A. Stiebing, “Was ist erlaubt, was verboten? - 9. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost 2013 - Teil 1 ,” Fleischwirtschaft 93, vol. 93, no. 10, p. S. 81-83, 2013."},"volume":93,"issue":"10","year":"2013","author":[{"first_name":"Gerd","last_name":"Weyland","id":"52116","full_name":"Weyland, Gerd"},{"id":"12235","full_name":"Stiebing, Achim","last_name":"Stiebing","first_name":"Achim"}],"department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"status":"public","page":"S. 81-83","publication":"Fleischwirtschaft 93","publication_identifier":{"issn":["0015-363x"]},"type":"journal_article","date_created":"2021-03-31T09:50:20Z","intvolume":" 93","user_id":"83778","date_updated":"2024-05-17T12:58:56Z","_id":"5385","language":[{"iso":"ger"}]},{"_id":"5386","language":[{"iso":"ger"}],"date_created":"2021-03-31T09:58:11Z","type":"journal_article","publication":"Fleischwirtschaft 93","intvolume":" 93","date_updated":"2023-03-15T13:49:59Z","user_id":"79260","issue":"11","department":[{"_id":"DEP4023"},{"_id":"DEP4000"}],"year":2013,"author":[{"last_name":"Weyland","first_name":"Gerd","full_name":"Weyland, Gerd","id":"52116"},{"last_name":"Stiebing","id":"12235","full_name":"Stiebing, Achim","first_name":"Achim"}],"page":"S. 81-83","status":"public","title":"Was ist erlaubt, was verboten? - 9. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost 2013 - Teil 2 ","citation":{"chicago-de":"Weyland, Gerd und Achim Stiebing. 2013. Was ist erlaubt, was verboten? - 9. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost 2013 - Teil 2 . Fleischwirtschaft 93 93, Nr. 11: S. 81-83.","din1505-2-1":"Weyland, Gerd ; Stiebing, Achim: Was ist erlaubt, was verboten? - 9. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost 2013 - Teil 2 . In: Fleischwirtschaft 93 Bd. 93 (2013), Nr. 11, S. S. 81-83","short":"G. Weyland, A. Stiebing, Fleischwirtschaft 93 93 (2013) S. 81-83.","chicago":"Weyland, Gerd, and Achim Stiebing. “Was ist erlaubt, was verboten? - 9. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost 2013 - Teil 2 .” Fleischwirtschaft 93 93, no. 11 (2013): S. 81-83.","ieee":"G. Weyland and A. Stiebing, “Was ist erlaubt, was verboten? - 9. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost 2013 - Teil 2 ,” Fleischwirtschaft 93, vol. 93, no. 11, p. S. 81-83, 2013.","apa":"Weyland, G., & Stiebing, A. (2013). Was ist erlaubt, was verboten? - 9. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost 2013 - Teil 2 . Fleischwirtschaft 93, 93(11), S. 81-83.","bjps":"Weyland G and Stiebing A (2013) Was ist erlaubt, was verboten? - 9. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost 2013 - Teil 2 . Fleischwirtschaft 93 93, S. 81-83.","havard":"G. Weyland, A. Stiebing, Was ist erlaubt, was verboten? - 9. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost 2013 - Teil 2 , Fleischwirtschaft 93. 93 (2013) S. 81-83.","mla":"Weyland, Gerd, and Achim Stiebing. “Was ist erlaubt, was verboten? - 9. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost 2013 - Teil 2 .” Fleischwirtschaft 93, vol. 93, no. 11, 2013, p. S. 81-83.","ufg":"Weyland, Gerd/Stiebing, Achim (2013): Was ist erlaubt, was verboten? - 9. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost 2013 - Teil 2 , in: Fleischwirtschaft 93 93 (11), S. S. 81-83.","ama":"Weyland G, Stiebing A. Was ist erlaubt, was verboten? - 9. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost 2013 - Teil 2 . Fleischwirtschaft 93. 2013;93(11):S. 81-83.","van":"Weyland G, Stiebing A. Was ist erlaubt, was verboten? - 9. Lemgoer Lebensmittelrechtstagung Fleisch + Feinkost 2013 - Teil 2 . Fleischwirtschaft 93. 2013;93(11):S. 81-83."},"volume":93},{"user_id":"83779","date_updated":"2024-05-24T07:03:03Z","type":"book","date_created":"2021-03-31T10:08:27Z","_id":"5387","language":[{"iso":"ger"}],"citation":{"ieee":"J. Schneider, Biologische Stabilisierung durch Schutzgasanwendung in Packungen. Behrs-Verlag, 2013.","ama":"Schneider J. Biologische Stabilisierung durch Schutzgasanwendung in Packungen. Behrs-Verlag; 2013.","chicago-de":"Schneider, Jan. 2013. Biologische Stabilisierung durch Schutzgasanwendung in Packungen. Handbuch der Lebensmittelhygiene . Behrs-Verlag.","din1505-2-1":"Schneider, Jan: Biologische Stabilisierung durch Schutzgasanwendung in Packungen, Handbuch der Lebensmittelhygiene : Behrs-Verlag, 2013","short":"J. Schneider, Biologische Stabilisierung durch Schutzgasanwendung in Packungen, Behrs-Verlag, 2013.","chicago":"Schneider, Jan. Biologische Stabilisierung durch Schutzgasanwendung in Packungen. Handbuch der Lebensmittelhygiene . Behrs-Verlag, 2013.","apa":"Schneider, J. (2013). Biologische Stabilisierung durch Schutzgasanwendung in Packungen. Behrs-Verlag.","ufg":"Schneider, Jan: Biologische Stabilisierung durch Schutzgasanwendung in Packungen, o. O. 2013 (Handbuch der Lebensmittelhygiene ).","bjps":"Schneider J (2013) Biologische Stabilisierung durch Schutzgasanwendung in Packungen. Behrs-Verlag.","mla":"Schneider, Jan. Biologische Stabilisierung durch Schutzgasanwendung in Packungen. Behrs-Verlag, 2013.","havard":"J. Schneider, Biologische Stabilisierung durch Schutzgasanwendung in Packungen, Behrs-Verlag, 2013.","van":"Schneider J. Biologische Stabilisierung durch Schutzgasanwendung in Packungen. Behrs-Verlag; 2013. (Handbuch der Lebensmittelhygiene )."},"publication_status":"published","title":"Biologische Stabilisierung durch Schutzgasanwendung in Packungen","series_title":"Handbuch der Lebensmittelhygiene ","publisher":"Behrs-Verlag","status":"public","year":"2013","author":[{"full_name":"Schneider, Jan","last_name":"Schneider","first_name":"Jan","id":"13209","orcid":"0000-0001-6401-8873"}],"department":[{"_id":"DEP4023"},{"_id":"DEP4018"}]},{"user_id":"83779","date_updated":"2024-05-24T09:05:27Z","publication":"Getränkeherstellung ","type":"journal_article","date_created":"2021-04-12T06:34:48Z","_id":"5494","language":[{"iso":"ger"}],"alternative_title":["Editorial"],"citation":{"ama":"Schneider J. Brennende Themen mit kühlem Kopf umsetzen. Getränkeherstellung . Published online 2013.","ieee":"J. Schneider, “Brennende Themen mit kühlem Kopf umsetzen,” Getränkeherstellung , 2013.","van":"Schneider J. Brennende Themen mit kühlem Kopf umsetzen. Getränkeherstellung . 2013;","havard":"J. Schneider, Brennende Themen mit kühlem Kopf umsetzen, Getränkeherstellung . (2013).","bjps":"Schneider J (2013) Brennende Themen mit kühlem Kopf umsetzen. Getränkeherstellung .","mla":"Schneider, Jan. “Brennende Themen mit kühlem Kopf umsetzen.” Getränkeherstellung , 2013.","ufg":"Schneider, Jan: Brennende Themen mit kühlem Kopf umsetzen, in: Getränkeherstellung (2013).","apa":"Schneider, J. (2013). Brennende Themen mit kühlem Kopf umsetzen. Getränkeherstellung .","chicago":"Schneider, Jan. “Brennende Themen mit kühlem Kopf umsetzen.” Getränkeherstellung , 2013.","short":"J. Schneider, Getränkeherstellung (2013).","chicago-de":"Schneider, Jan. 2013. Brennende Themen mit kühlem Kopf umsetzen. Getränkeherstellung .","din1505-2-1":"Schneider, Jan: Brennende Themen mit kühlem Kopf umsetzen. In: Getränkeherstellung (2013)"},"title":"Brennende Themen mit kühlem Kopf umsetzen","status":"public","year":"2013","author":[{"orcid":"0000-0001-6401-8873","last_name":"Schneider","full_name":"Schneider, Jan","id":"13209","first_name":"Jan"}],"department":[{"_id":"DEP4023"},{"_id":"DEP4018"}]},{"title":"Ingredients, Morphology and Color Changes of Herbal Drugs and Spices after Mechanical Saturated Steam Decontamination","citation":{"din1505-2-1":"Lange, H.: Ingredients, Morphology and Color Changes of Herbal Drugs and Spices after Mechanical Saturated Steam Decontamination. Quedlinburg : Julius-Kühn-Institut, 2013","chicago-de":"Lange, H. 2013. Ingredients, Morphology and Color Changes of Herbal Drugs and Spices after Mechanical Saturated Steam Decontamination. Quedlinburg: Julius-Kühn-Institut.","short":"H. Lange, Ingredients, Morphology and Color Changes of Herbal Drugs and Spices after Mechanical Saturated Steam Decontamination, Julius-Kühn-Institut, Quedlinburg, 2013.","chicago":"Lange, H. Ingredients, Morphology and Color Changes of Herbal Drugs and Spices after Mechanical Saturated Steam Decontamination. Quedlinburg: Julius-Kühn-Institut, 2013.","ieee":"H. Lange, Ingredients, Morphology and Color Changes of Herbal Drugs and Spices after Mechanical Saturated Steam Decontamination. Quedlinburg: Julius-Kühn-Institut, 2013.","apa":"Lange, H. (2013). Ingredients, Morphology and Color Changes of Herbal Drugs and Spices after Mechanical Saturated Steam Decontamination. Quedlinburg: Julius-Kühn-Institut.","havard":"H. Lange, Ingredients, Morphology and Color Changes of Herbal Drugs and Spices after Mechanical Saturated Steam Decontamination, Julius-Kühn-Institut, Quedlinburg, 2013.","mla":"Lange, H. Ingredients, Morphology and Color Changes of Herbal Drugs and Spices after Mechanical Saturated Steam Decontamination. Julius-Kühn-Institut, 2013.","bjps":"Lange H (2013) Ingredients, Morphology and Color Changes of Herbal Drugs and Spices after Mechanical Saturated Steam Decontamination. Quedlinburg: Julius-Kühn-Institut.","ufg":"Lange, H. (2013): Ingredients, Morphology and Color Changes of Herbal Drugs and Spices after Mechanical Saturated Steam Decontamination, Quedlinburg.","ama":"Lange H. Ingredients, Morphology and Color Changes of Herbal Drugs and Spices after Mechanical Saturated Steam Decontamination. Quedlinburg: Julius-Kühn-Institut; 2013.","van":"Lange H. Ingredients, Morphology and Color Changes of Herbal Drugs and Spices after Mechanical Saturated Steam Decontamination. Quedlinburg: Julius-Kühn-Institut; 2013."},"publication_status":"published","year":2013,"author":[{"full_name":"Lange, H.","first_name":"H.","last_name":"Lange"}],"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"status":"public","publisher":"Julius-Kühn-Institut","publication_identifier":{"isbn":[" 978-3-930037-96-4"]},"date_created":"2021-04-12T06:49:36Z","type":"book","user_id":"74222","date_updated":"2023-03-15T13:49:59Z","alternative_title":["Dissertation TU Braunschweig, entstanden in Zusammenarbeit mit der HS OWL"],"place":"Quedlinburg","language":[{"iso":"eng"}],"_id":"5496"},{"intvolume":" 18","user_id":"74222","date_updated":"2023-03-15T13:49:59Z","publication":"Z. Arznei- und Gewürzpflanzen ","type":"journal_article","date_created":"2021-04-12T06:54:04Z","_id":"5497","language":[{"iso":"ger"}],"citation":{"chicago-de":"Schwarzer, Knut, Anna Dammann_, H. Lange, H. Krüger und Ulrich Müller. 2013. Mechanische Sattdampfentkeimung von Medizinaldrogen mit unterschiedlichen Oberflächeneigenschaften. Z. Arznei- und Gewürzpflanzen 18, Nr. 3: S. 111-118.","din1505-2-1":"Schwarzer, Knut ; Dammann_, Anna ; Lange, H. ; Krüger, H. ; Müller, Ulrich: Mechanische Sattdampfentkeimung von Medizinaldrogen mit unterschiedlichen Oberflächeneigenschaften. In: Z. Arznei- und Gewürzpflanzen Bd. 18 (2013), Nr. 3, S. S. 111-118","short":"K. Schwarzer, A. Dammann_, H. Lange, H. Krüger, U. Müller, Z. Arznei- und Gewürzpflanzen 18 (2013) S. 111-118.","chicago":"Schwarzer, Knut, Anna Dammann_, H. Lange, H. Krüger, and Ulrich Müller. “Mechanische Sattdampfentkeimung von Medizinaldrogen mit unterschiedlichen Oberflächeneigenschaften.” Z. Arznei- und Gewürzpflanzen 18, no. 3 (2013): S. 111-118.","apa":"Schwarzer, K., Dammann_, A., Lange, H., Krüger, H., & Müller, U. (2013). Mechanische Sattdampfentkeimung von Medizinaldrogen mit unterschiedlichen Oberflächeneigenschaften. Z. Arznei- und Gewürzpflanzen , 18(3), S. 111-118.","ufg":"Schwarzer, Knut et. al. (2013): Mechanische Sattdampfentkeimung von Medizinaldrogen mit unterschiedlichen Oberflächeneigenschaften, in: Z. Arznei- und Gewürzpflanzen 18 (3), S. S. 111-118.","mla":"Schwarzer, Knut, et al. “Mechanische Sattdampfentkeimung von Medizinaldrogen mit unterschiedlichen Oberflächeneigenschaften.” Z. Arznei- und Gewürzpflanzen , vol. 18, no. 3, 2013, p. S. 111-118.","havard":"K. Schwarzer, A. Dammann_, H. Lange, H. Krüger, U. Müller, Mechanische Sattdampfentkeimung von Medizinaldrogen mit unterschiedlichen Oberflächeneigenschaften, Z. Arznei- und Gewürzpflanzen . 18 (2013) S. 111-118.","bjps":"Schwarzer K et al. (2013) Mechanische Sattdampfentkeimung von Medizinaldrogen mit unterschiedlichen Oberflächeneigenschaften. Z. Arznei- und Gewürzpflanzen 18, S. 111-118.","van":"Schwarzer K, Dammann_ A, Lange H, Krüger H, Müller U. Mechanische Sattdampfentkeimung von Medizinaldrogen mit unterschiedlichen Oberflächeneigenschaften. Z Arznei- und Gewürzpflanzen . 2013;18(3):S. 111-118.","ieee":"K. Schwarzer, A. Dammann_, H. Lange, H. Krüger, and U. Müller, “Mechanische Sattdampfentkeimung von Medizinaldrogen mit unterschiedlichen Oberflächeneigenschaften,” Z. Arznei- und Gewürzpflanzen , vol. 18, no. 3, p. S. 111-118, 2013.","ama":"Schwarzer K, Dammann_ A, Lange H, Krüger H, Müller U. Mechanische Sattdampfentkeimung von Medizinaldrogen mit unterschiedlichen Oberflächeneigenschaften. Z Arznei- und Gewürzpflanzen . 2013;18(3):S. 111-118."},"volume":18,"title":"Mechanische Sattdampfentkeimung von Medizinaldrogen mit unterschiedlichen Oberflächeneigenschaften","status":"public","page":"S. 111-118","issue":"3","author":[{"id":"13329","full_name":"Schwarzer, Knut","last_name":"Schwarzer","first_name":"Knut"},{"first_name":"Anna","last_name":"Dammann_","id":"43899","full_name":"Dammann_, Anna"},{"first_name":"H.","full_name":"Lange, H.","last_name":"Lange"},{"full_name":"Krüger, H.","first_name":"H.","last_name":"Krüger"},{"last_name":"Müller","id":"12119","full_name":"Müller, Ulrich","first_name":"Ulrich"}],"year":2013,"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}]},{"citation":{"apa":"Stiebing, A. (2013). Kochsalz-Reduktion bei Rohwürsten – Grenzen und Möglichkeiten. Presented at the Gissel-Institut.","chicago":"Stiebing, Achim. “Kochsalz-Reduktion Bei Rohwürsten – Grenzen Und Möglichkeiten,” 2013.","van":"Stiebing A. Kochsalz-Reduktion bei Rohwürsten – Grenzen und Möglichkeiten. In 2013.","ufg":"Stiebing, Achim (2013): Kochsalz-Reduktion bei Rohwürsten – Grenzen und Möglichkeiten, in: .","havard":"A. Stiebing, Kochsalz-Reduktion bei Rohwürsten – Grenzen und Möglichkeiten, in: 2013.","bjps":"Stiebing A (2013) Kochsalz-Reduktion Bei Rohwürsten – Grenzen Und Möglichkeiten.","mla":"Stiebing, Achim. Kochsalz-Reduktion Bei Rohwürsten – Grenzen Und Möglichkeiten. 2013.","short":"A. Stiebing, in: 2013.","chicago-de":"Stiebing, Achim. 2013. Kochsalz-Reduktion bei Rohwürsten – Grenzen und Möglichkeiten. In: .","din1505-2-1":"Stiebing, Achim: Kochsalz-Reduktion bei Rohwürsten – Grenzen und Möglichkeiten. In: , 2013","ieee":"A. Stiebing, “Kochsalz-Reduktion bei Rohwürsten – Grenzen und Möglichkeiten,” presented at the Gissel-Institut, 2013.","ama":"Stiebing A. Kochsalz-Reduktion bei Rohwürsten – Grenzen und Möglichkeiten. In: ; 2013."},"title":"Kochsalz-Reduktion bei Rohwürsten – Grenzen und Möglichkeiten","status":"public","department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"conference":{"name":"Gissel-Institut"},"author":[{"id":"12235","first_name":"Achim","full_name":"Stiebing, Achim","last_name":"Stiebing"}],"year":2013,"date_updated":"2023-03-15T13:50:00Z","user_id":"79260","date_created":"2021-04-12T07:03:43Z","type":"conference","_id":"5498","language":[{"iso":"eng"}],"keyword":["Vorträge und Präsentationen"]},{"date_created":"2021-04-12T07:07:18Z","type":"conference","date_updated":"2023-03-15T13:50:00Z","user_id":"74222","language":[{"iso":"ger"}],"_id":"5499","title":"Mikrobiologie-Datenbank Lemgo – D- und z-Werte Lebensmittel-relevanter Mikroorganismen oder ‚Die Lemgo D- and z-value Database for Food‘ (LDzBase)“","citation":{"chicago-de":"Müller, Ulrich. 2013. Mikrobiologie-Datenbank Lemgo – D- und z-Werte Lebensmittel-relevanter Mikroorganismen oder ‚Die Lemgo D- and z-value Database for Food‘ (LDzBase)“. In: .","din1505-2-1":"Müller, Ulrich: Mikrobiologie-Datenbank Lemgo – D- und z-Werte Lebensmittel-relevanter Mikroorganismen oder ‚Die Lemgo D- and z-value Database for Food‘ (LDzBase)“. In: , 2013","short":"U. Müller, in: 2013.","chicago":"Müller, Ulrich. “Mikrobiologie-Datenbank Lemgo – D- und z-Werte Lebensmittel-relevanter Mikroorganismen oder ‚Die Lemgo D- and z-value Database for Food‘ (LDzBase)“,” 2013.","ieee":"U. Müller, “Mikrobiologie-Datenbank Lemgo – D- und z-Werte Lebensmittel-relevanter Mikroorganismen oder ‚Die Lemgo D- and z-value Database for Food‘ (LDzBase)“,” presented at the GDL-Symposium „Sicherung der Lebensmittelqualität – Kinetische Aspekte“, 2013.","apa":"Müller, U. (2013). Mikrobiologie-Datenbank Lemgo – D- und z-Werte Lebensmittel-relevanter Mikroorganismen oder ‚Die Lemgo D- and z-value Database for Food‘ (LDzBase)“. Presented at the GDL-Symposium „Sicherung der Lebensmittelqualität – Kinetische Aspekte“.","bjps":"Müller U (2013) Mikrobiologie-Datenbank Lemgo – D- und z-Werte Lebensmittel-relevanter Mikroorganismen oder ‚Die Lemgo D- and z-value Database for Food‘ (LDzBase)“.","havard":"U. Müller, Mikrobiologie-Datenbank Lemgo – D- und z-Werte Lebensmittel-relevanter Mikroorganismen oder ‚Die Lemgo D- and z-value Database for Food‘ (LDzBase)“, in: 2013.","mla":"Müller, Ulrich. Mikrobiologie-Datenbank Lemgo – D- und z-Werte Lebensmittel-relevanter Mikroorganismen oder ‚Die Lemgo D- and z-value Database for Food‘ (LDzBase)“. 2013.","ufg":"Müller, Ulrich (2013): Mikrobiologie-Datenbank Lemgo – D- und z-Werte Lebensmittel-relevanter Mikroorganismen oder ‚Die Lemgo D- and z-value Database for Food‘ (LDzBase)“, in: .","ama":"Müller U. Mikrobiologie-Datenbank Lemgo – D- und z-Werte Lebensmittel-relevanter Mikroorganismen oder ‚Die Lemgo D- and z-value Database for Food‘ (LDzBase)“. In: ; 2013.","van":"Müller U. Mikrobiologie-Datenbank Lemgo – D- und z-Werte Lebensmittel-relevanter Mikroorganismen oder ‚Die Lemgo D- and z-value Database for Food‘ (LDzBase)“. In 2013."},"conference":{"start_date":"2013-06-24","end_date":"2013-06-25","name":"GDL-Symposium „Sicherung der Lebensmittelqualität – Kinetische Aspekte“"},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"year":2013,"author":[{"id":"12119","last_name":"Müller","full_name":"Müller, Ulrich","first_name":"Ulrich"}],"status":"public"},{"_id":"5500","language":[{"iso":"eng"}],"date_updated":"2024-05-24T09:06:50Z","user_id":"83779","type":"conference","date_created":"2021-04-12T07:12:12Z","status":"public","department":[{"_id":"DEP4023"},{"_id":"DEP4009"},{"_id":"DEP4018"}],"conference":{"name":"KHS Forum, drinktec","location":"München","start_date":"2013-09-17","end_date":"2013-09-17"},"author":[{"last_name":"Schneider","first_name":"Jan","id":"13209","full_name":"Schneider, Jan","orcid":"0000-0001-6401-8873"},{"full_name":"Schwarzer, Knut","first_name":"Knut","id":"13329","last_name":"Schwarzer"},{"first_name":"Anna","full_name":"Dammann_, Anna","last_name":"Dammann_","id":"43899"},{"last_name":"Müller","full_name":"Müller, Ulrich","id":"12119","first_name":"Ulrich"}],"year":"2013","citation":{"ufg":"Schneider, Jan u. a.: Gentle Beverage Pasteurisation, in: o. Hg.: o. O. 2013.","havard":"J. Schneider, K. Schwarzer, A. Dammann_, U. Müller, Gentle Beverage Pasteurisation, in: 2013.","mla":"Schneider, Jan, et al. Gentle Beverage Pasteurisation. 2013.","bjps":"Schneider J et al. (2013) Gentle Beverage Pasteurisation.","van":"Schneider J, Schwarzer K, Dammann_ A, Müller U. Gentle Beverage Pasteurisation. In 2013.","chicago":"Schneider, Jan, Knut Schwarzer, Anna Dammann_, and Ulrich Müller. “Gentle Beverage Pasteurisation,” 2013.","apa":"Schneider, J., Schwarzer, K., Dammann_, A., & Müller, U. (2013). Gentle Beverage Pasteurisation. KHS Forum, drinktec, München.","din1505-2-1":"Schneider, Jan ; Schwarzer, Knut ; Dammann_, Anna ; Müller, Ulrich: Gentle Beverage Pasteurisation. In: , 2013","chicago-de":"Schneider, Jan, Knut Schwarzer, Anna Dammann_ und Ulrich Müller. 2013. Gentle Beverage Pasteurisation. In: .","short":"J. Schneider, K. Schwarzer, A. Dammann_, U. Müller, in: 2013.","ama":"Schneider J, Schwarzer K, Dammann_ A, Müller U. Gentle Beverage Pasteurisation. In: ; 2013.","ieee":"J. Schneider, K. Schwarzer, A. Dammann_, and U. Müller, “Gentle Beverage Pasteurisation,” presented at the KHS Forum, drinktec, München, 2013."},"title":"Gentle Beverage Pasteurisation"},{"title":" Nährwertveränderte Brühwürste - Einfluss von Zutaten und Zusatzstoffen auf die funktionellen Eigenschaften","citation":{"chicago":"Stiebing, Achim. “ Nährwertveränderte Brühwürste - Einfluss von Zutaten und Zusatzstoffen auf die funktionellen Eigenschaften,” 2013.","apa":"Stiebing, A. (2013). Nährwertveränderte Brühwürste - Einfluss von Zutaten und Zusatzstoffen auf die funktionellen Eigenschaften. Presented at the 36. Lemgoer Arbeitstagung Fleisch und Feinkost, Lemgo.","ufg":"Stiebing, Achim (2013): Nährwertveränderte Brühwürste - Einfluss von Zutaten und Zusatzstoffen auf die funktionellen Eigenschaften, in: .","mla":"Stiebing, Achim. Nährwertveränderte Brühwürste - Einfluss von Zutaten und Zusatzstoffen auf die funktionellen Eigenschaften. 2013.","havard":"A. Stiebing, Nährwertveränderte Brühwürste - Einfluss von Zutaten und Zusatzstoffen auf die funktionellen Eigenschaften, in: 2013.","bjps":"Stiebing A (2013) Nährwertveränderte Brühwürste - Einfluss von Zutaten und Zusatzstoffen auf die funktionellen Eigenschaften.","van":"Stiebing A. Nährwertveränderte Brühwürste - Einfluss von Zutaten und Zusatzstoffen auf die funktionellen Eigenschaften. In 2013.","din1505-2-1":"Stiebing, Achim: Nährwertveränderte Brühwürste - Einfluss von Zutaten und Zusatzstoffen auf die funktionellen Eigenschaften. In: , 2013","chicago-de":"Stiebing, Achim. 2013. Nährwertveränderte Brühwürste - Einfluss von Zutaten und Zusatzstoffen auf die funktionellen Eigenschaften. In: .","short":"A. Stiebing, in: 2013.","ieee":"A. Stiebing, “ Nährwertveränderte Brühwürste - Einfluss von Zutaten und Zusatzstoffen auf die funktionellen Eigenschaften,” presented at the 36. Lemgoer Arbeitstagung Fleisch und Feinkost, Lemgo, 2013.","ama":"Stiebing A. Nährwertveränderte Brühwürste - Einfluss von Zutaten und Zusatzstoffen auf die funktionellen Eigenschaften. In: ; 2013."},"department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"conference":{"end_date":"2013-11-04","start_date":"2013-11-04","location":"Lemgo","name":"36. Lemgoer Arbeitstagung Fleisch und Feinkost"},"author":[{"first_name":"Achim","last_name":"Stiebing","id":"12235","full_name":"Stiebing, Achim"}],"year":2013,"status":"public","type":"conference","date_created":"2021-04-12T07:14:49Z","date_updated":"2023-03-15T13:50:00Z","user_id":"79260","language":[{"iso":"ger"}],"_id":"5501"},{"_id":"2103","language":[{"iso":"eng"}],"date_updated":"2023-03-15T13:49:38Z","user_id":"45673","date_created":"2019-12-03T06:32:37Z","type":"journal_article","publication":"Optical Document Security - The Conference on Optical Security and Counterfeit Detection III","status":"public","department":[{"_id":"DEP5023"}],"author":[{"first_name":"Jan-Friedrich","last_name":"Ehlenbröker","full_name":"Ehlenbröker, Jan-Friedrich","id":"1852"},{"full_name":"Priesterjahn, Steffen","first_name":"Steffen","last_name":"Priesterjahn"},{"first_name":"Alexander","full_name":"Drichel, Alexander","last_name":"Drichel"},{"last_name":"Lohweg","id":"1804","full_name":"Lohweg, Volker","first_name":"Volker","orcid":"0000-0002-3325-7887"}],"year":2012,"citation":{"chicago-de":"Ehlenbröker, Jan-Friedrich, Steffen Priesterjahn, Alexander Drichel und Volker Lohweg. 2012. Robust ATM PIN Pad Authentication with Coded Features. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection III, San Francisco, CA, USA, January 18-20, 2012. . Optical Document Security - The Conference on Optical Security and Counterfeit Detection III.","din1505-2-1":"Ehlenbröker, Jan-Friedrich ; Priesterjahn, Steffen ; Drichel, Alexander ; Lohweg, Volker: Robust ATM PIN Pad Authentication with Coded Features. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection III, San Francisco, CA, USA, January 18-20, 2012. . In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection III (2012)","short":"J.-F. Ehlenbröker, S. Priesterjahn, A. Drichel, V. Lohweg, Optical Document Security - The Conference on Optical Security and Counterfeit Detection III (2012).","chicago":"Ehlenbröker, Jan-Friedrich, Steffen Priesterjahn, Alexander Drichel, and Volker Lohweg. “Robust ATM PIN Pad Authentication with Coded Features. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection III, San Francisco, CA, USA, January 18-20, 2012. .” Optical Document Security - The Conference on Optical Security and Counterfeit Detection III, 2012.","apa":"Ehlenbröker, J.-F., Priesterjahn, S., Drichel, A., & Lohweg, V. (2012). Robust ATM PIN Pad Authentication with Coded Features. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection III, San Francisco, CA, USA, January 18-20, 2012. . Optical Document Security - The Conference on Optical Security and Counterfeit Detection III.","ieee":"J.-F. Ehlenbröker, S. Priesterjahn, A. Drichel, and V. Lohweg, “Robust ATM PIN Pad Authentication with Coded Features. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection III, San Francisco, CA, USA, January 18-20, 2012. ,” Optical Document Security - The Conference on Optical Security and Counterfeit Detection III, 2012.","ufg":"Ehlenbröker, Jan-Friedrich et. al. (2012): Robust ATM PIN Pad Authentication with Coded Features. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection III, San Francisco, CA, USA, January 18-20, 2012. , in: Optical Document Security - The Conference on Optical Security and Counterfeit Detection III.","havard":"J.-F. Ehlenbröker, S. Priesterjahn, A. Drichel, V. Lohweg, Robust ATM PIN Pad Authentication with Coded Features. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection III, San Francisco, CA, USA, January 18-20, 2012. , Optical Document Security - The Conference on Optical Security and Counterfeit Detection III. (2012).","mla":"Ehlenbröker, Jan-Friedrich, et al. “Robust ATM PIN Pad Authentication with Coded Features. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection III, San Francisco, CA, USA, January 18-20, 2012. .” Optical Document Security - The Conference on Optical Security and Counterfeit Detection III, 2012.","bjps":"Ehlenbröker J-F et al. (2012) Robust ATM PIN Pad Authentication with Coded Features. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection III, San Francisco, CA, USA, January 18-20, 2012. . Optical Document Security - The Conference on Optical Security and Counterfeit Detection III.","van":"Ehlenbröker J-F, Priesterjahn S, Drichel A, Lohweg V. Robust ATM PIN Pad Authentication with Coded Features. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection III, San Francisco, CA, USA, January 18-20, 2012. . Optical Document Security - The Conference on Optical Security and Counterfeit Detection III. 2012;","ama":"Ehlenbröker J-F, Priesterjahn S, Drichel A, Lohweg V. Robust ATM PIN Pad Authentication with Coded Features. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection III, San Francisco, CA, USA, January 18-20, 2012. . Optical Document Security - The Conference on Optical Security and Counterfeit Detection III. 2012."},"title":"Robust ATM PIN Pad Authentication with Coded Features. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection III, San Francisco, CA, USA, January 18-20, 2012. "},{"language":[{"iso":"eng"}],"keyword":["authentication","anti-counterfeit features","mobile device","smartphone","wavelet transform","pattern recognition","Sound-of-Intaglio"],"_id":"2104","date_updated":"2023-03-15T13:49:38Z","user_id":"45673","type":"journal_article","date_created":"2019-12-03T06:34:28Z","publication":"Optical Document Security - The Conference on Optical Security and Counterfeit Detection III","status":"public","department":[{"_id":"DEP5023"}],"author":[{"orcid":"0000-0002-3325-7887","last_name":"Lohweg","id":"1804","full_name":"Lohweg, Volker","first_name":"Volker"},{"id":"46416","first_name":"Helene","last_name":"Dörksen","full_name":"Dörksen, Helene"},{"first_name":"Eugen","last_name":"Gillich","id":"1706","full_name":"Gillich, Eugen"},{"id":"1639","last_name":"Hildebrand","full_name":"Hildebrand, Roland","first_name":"Roland"},{"id":"46243","first_name":"Jan Leif","full_name":"Hoffmann, Jan Leif","last_name":"Hoffmann"},{"id":"2128","last_name":"Schaede","first_name":"Johannes","full_name":"Schaede, Johannes"}],"year":2012,"abstract":[{"lang":"eng","text":"Maintaining confidence in security documents, especially banknotes, is and remains a major concern for the central banks in order to maintain the stability of the economy around the world. In this paper we describe an image processing and pattern recognition approach which is based on the Sound-of-Intaglio concept [1] for the usage in smart devices such as smartphones. Today, in many world regions smartphones are in use. These devices become more and more computing units, equipped with resource-limited but effective CPUs, cameras with illumination, and flexible operating systems. Hence, it appears to be obvious, to apply those smartphones for banknote authentication, especially for visually impaired persons. However, it has to be researched, whether those devices are capable of processing the data under the constraints of image quality and processing power. Our results show that it is in general possible to use such devices for banknote authentication applications."}],"citation":{"short":"V. Lohweg, H. Dörksen, E. Gillich, R. Hildebrand, J.L. Hoffmann, J. Schaede, Optical Document Security - The Conference on Optical Security and Counterfeit Detection III (2012).","din1505-2-1":"Lohweg, Volker ; Dörksen, Helene ; Gillich, Eugen ; Hildebrand, Roland ; Hoffmann, Jan Leif ; Schaede, Johannes: Mobile Devices for Banknote Authentication – is it possible? In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection III, San Francisco, CA, USA, January 18-20, 2012. . In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection III (2012)","chicago-de":"Lohweg, Volker, Helene Dörksen, Eugen Gillich, Roland Hildebrand, Jan Leif Hoffmann und Johannes Schaede. 2012. Mobile Devices for Banknote Authentication – is it possible? In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection III, San Francisco, CA, USA, January 18-20, 2012. . Optical Document Security - The Conference on Optical Security and Counterfeit Detection III.","ama":"Lohweg V, Dörksen H, Gillich E, Hildebrand R, Hoffmann JL, Schaede J. Mobile Devices for Banknote Authentication – is it possible? In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection III, San Francisco, CA, USA, January 18-20, 2012. . Optical Document Security - The Conference on Optical Security and Counterfeit Detection III. 2012.","van":"Lohweg V, Dörksen H, Gillich E, Hildebrand R, Hoffmann JL, Schaede J. Mobile Devices for Banknote Authentication – is it possible? In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection III, San Francisco, CA, USA, January 18-20, 2012. . Optical Document Security - The Conference on Optical Security and Counterfeit Detection III. 2012;","havard":"V. Lohweg, H. Dörksen, E. Gillich, R. Hildebrand, J.L. Hoffmann, J. Schaede, Mobile Devices for Banknote Authentication – is it possible? In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection III, San Francisco, CA, USA, January 18-20, 2012. , Optical Document Security - The Conference on Optical Security and Counterfeit Detection III. (2012).","bjps":"Lohweg V et al. (2012) Mobile Devices for Banknote Authentication – Is It Possible? In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection III, San Francisco, CA, USA, January 18-20, 2012. . Optical Document Security - The Conference on Optical Security and Counterfeit Detection III.","mla":"Lohweg, Volker, et al. “Mobile Devices for Banknote Authentication – Is It Possible? In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection III, San Francisco, CA, USA, January 18-20, 2012. .” Optical Document Security - The Conference on Optical Security and Counterfeit Detection III, 2012.","ufg":"Lohweg, Volker et. al. (2012): Mobile Devices for Banknote Authentication – is it possible? In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection III, San Francisco, CA, USA, January 18-20, 2012. , in: Optical Document Security - The Conference on Optical Security and Counterfeit Detection III.","ieee":"V. Lohweg, H. Dörksen, E. Gillich, R. Hildebrand, J. L. Hoffmann, and J. Schaede, “Mobile Devices for Banknote Authentication – is it possible? In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection III, San Francisco, CA, USA, January 18-20, 2012. ,” Optical Document Security - The Conference on Optical Security and Counterfeit Detection III, 2012.","apa":"Lohweg, V., Dörksen, H., Gillich, E., Hildebrand, R., Hoffmann, J. L., & Schaede, J. (2012). Mobile Devices for Banknote Authentication – is it possible? In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection III, San Francisco, CA, USA, January 18-20, 2012. . Optical Document Security - The Conference on Optical Security and Counterfeit Detection III.","chicago":"Lohweg, Volker, Helene Dörksen, Eugen Gillich, Roland Hildebrand, Jan Leif Hoffmann, and Johannes Schaede. “Mobile Devices for Banknote Authentication – Is It Possible? In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection III, San Francisco, CA, USA, January 18-20, 2012. .” Optical Document Security - The Conference on Optical Security and Counterfeit Detection III, 2012."},"title":"Mobile Devices for Banknote Authentication – is it possible? In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection III, San Francisco, CA, USA, January 18-20, 2012. "},{"language":[{"iso":"ger"}],"publication":"Cyber-Physical Systems – Enabling Multi-Nature Systems (CPMNS), Dresden, April 18, ","publication_identifier":{"isbn":["978-3-8396-0398-7 "]},"date_created":"2019-12-03T06:37:27Z","file_date_updated":"2019-12-03T06:39:10Z","date_updated":"2023-03-15T13:49:38Z","author":[{"last_name":"Dicks","first_name":"Alexander","full_name":"Dicks, Alexander","id":"1853"},{"id":"46440","full_name":"Bator, Martyna","first_name":"Martyna","last_name":"Bator"},{"first_name":"Volker","full_name":"Lohweg, Volker","last_name":"Lohweg","id":"1804","orcid":"0000-0002-3325-7887"},{"first_name":"Sebastian","full_name":"Faltinski, Sebastian","last_name":"Faltinski"},{"full_name":"Niggemann, Oliver","last_name":"Niggemann","first_name":"Oliver","id":"10876"}],"year":2012,"status":"public","page":"51-56","title":"Cyber-Physical Systems im Maschinen- und Anlagenbau – ein Konzept für die Zukunft?","citation":{"chicago-de":"Dicks, Alexander, Martyna Bator, Volker Lohweg, Sebastian Faltinski und Oliver Niggemann. 2012. Cyber-Physical Systems im Maschinen- und Anlagenbau – ein Konzept für die Zukunft? In: Cyber-Physical Systems – Enabling Multi-Nature Systems (CPMNS), Dresden, April 18, , 51–56. Stuttgart: Fraunhofer-Verlag.","din1505-2-1":"Dicks, Alexander ; Bator, Martyna ; Lohweg, Volker ; Faltinski, Sebastian ; Niggemann, Oliver: Cyber-Physical Systems im Maschinen- und Anlagenbau – ein Konzept für die Zukunft? In: Cyber-Physical Systems – Enabling Multi-Nature Systems (CPMNS), Dresden, April 18, . Stuttgart : Fraunhofer-Verlag, 2012, S. 51–56","short":"A. Dicks, M. Bator, V. Lohweg, S. Faltinski, O. Niggemann, in: Cyber-Physical Systems – Enabling Multi-Nature Systems (CPMNS), Dresden, April 18, , Fraunhofer-Verlag, Stuttgart, 2012, pp. 51–56.","ufg":"Dicks, Alexander et. al. (2012): Cyber-Physical Systems im Maschinen- und Anlagenbau – ein Konzept für die Zukunft?, in: Cyber-Physical Systems – Enabling Multi-Nature Systems (CPMNS), Dresden, April 18, , Stuttgart, S. 51–56.","havard":"A. Dicks, M. Bator, V. Lohweg, S. Faltinski, O. Niggemann, Cyber-Physical Systems im Maschinen- und Anlagenbau – ein Konzept für die Zukunft?, in: Cyber-Physical Systems – Enabling Multi-Nature Systems (CPMNS), Dresden, April 18, , Fraunhofer-Verlag, Stuttgart, 2012: pp. 51–56.","mla":"Dicks, Alexander, et al. “Cyber-Physical Systems im Maschinen- und Anlagenbau – ein Konzept für die Zukunft?” Cyber-Physical Systems – Enabling Multi-Nature Systems (CPMNS), Dresden, April 18, , Fraunhofer-Verlag, 2012, pp. 51–56.","bjps":"Dicks A et al. (2012) Cyber-Physical Systems im Maschinen- und Anlagenbau – ein Konzept für die Zukunft? Cyber-Physical Systems – Enabling Multi-Nature Systems (CPMNS), Dresden, April 18, . Stuttgart: Fraunhofer-Verlag, pp. 51–56.","van":"Dicks A, Bator M, Lohweg V, Faltinski S, Niggemann O. Cyber-Physical Systems im Maschinen- und Anlagenbau – ein Konzept für die Zukunft? In: Cyber-Physical Systems – Enabling Multi-Nature Systems (CPMNS), Dresden, April 18, . Stuttgart: Fraunhofer-Verlag; 2012. p. 51–6.","ama":"Dicks A, Bator M, Lohweg V, Faltinski S, Niggemann O. Cyber-Physical Systems im Maschinen- und Anlagenbau – ein Konzept für die Zukunft? In: Cyber-Physical Systems – Enabling Multi-Nature Systems (CPMNS), Dresden, April 18, . Stuttgart: Fraunhofer-Verlag; 2012:51-56.","chicago":"Dicks, Alexander, Martyna Bator, Volker Lohweg, Sebastian Faltinski, and Oliver Niggemann. “Cyber-Physical Systems im Maschinen- und Anlagenbau – ein Konzept für die Zukunft?” In Cyber-Physical Systems – Enabling Multi-Nature Systems (CPMNS), Dresden, April 18, , 51–56. Stuttgart: Fraunhofer-Verlag, 2012.","apa":"Dicks, A., Bator, M., Lohweg, V., Faltinski, S., & Niggemann, O. (2012). Cyber-Physical Systems im Maschinen- und Anlagenbau – ein Konzept für die Zukunft? In Cyber-Physical Systems – Enabling Multi-Nature Systems (CPMNS), Dresden, April 18, (pp. 51–56). Stuttgart: Fraunhofer-Verlag.","ieee":"A. Dicks, M. Bator, V. Lohweg, S. Faltinski, and O. Niggemann, “Cyber-Physical Systems im Maschinen- und Anlagenbau – ein Konzept für die Zukunft?,” in Cyber-Physical Systems – Enabling Multi-Nature Systems (CPMNS), Dresden, April 18, , 2012, pp. 51–56."},"has_accepted_license":"1","_id":"2105","place":"Stuttgart","type":"conference","user_id":"45673","ddc":["620"],"department":[{"_id":"DEP5023"}],"publisher":"Fraunhofer-Verlag","file":[{"access_level":"closed","file_size":314865,"file_id":"2106","file_name":"lohweg_cyber.pdf","date_created":"2019-12-03T06:39:10Z","content_type":"application/pdf","date_updated":"2019-12-03T06:39:10Z","relation":"main_file","creator":"6bl-f5s"}],"publication_status":"published"},{"title":"An Extended Perspective on Evidential Aggregation Rules in Machine Conditioning","citation":{"ieee":"U. Mönks, K. Voth, and V. Lohweg, “An Extended Perspective on Evidential Aggregation Rules in Machine Conditioning,” in IEEE CIP 2012, Third International Workshop on Cognitive Information Processing, May 28-30 2012, Parador de Baiona, Spain, 2012.","ama":"Mönks U, Voth K, Lohweg V. An Extended Perspective on Evidential Aggregation Rules in Machine Conditioning. In: IEEE CIP 2012, Third International Workshop on Cognitive Information Processing, May 28-30 2012, Parador de Baiona, Spain. ; 2012. doi:10.1109/CIP.2012.6232905","apa":"Mönks, U., Voth, K., & Lohweg, V. (2012). An Extended Perspective on Evidential Aggregation Rules in Machine Conditioning. In IEEE CIP 2012, Third International Workshop on Cognitive Information Processing, May 28-30 2012, Parador de Baiona, Spain. https://doi.org/10.1109/CIP.2012.6232905","chicago":"Mönks, Uwe, Karl Voth, and Volker Lohweg. “An Extended Perspective on Evidential Aggregation Rules in Machine Conditioning.” In IEEE CIP 2012, Third International Workshop on Cognitive Information Processing, May 28-30 2012, Parador de Baiona, Spain, 2012. https://doi.org/10.1109/CIP.2012.6232905.","van":"Mönks U, Voth K, Lohweg V. An Extended Perspective on Evidential Aggregation Rules in Machine Conditioning. In: IEEE CIP 2012, Third International Workshop on Cognitive Information Processing, May 28-30 2012, Parador de Baiona, Spain. 2012.","ufg":"Mönks, Uwe et. al. (2012): An Extended Perspective on Evidential Aggregation Rules in Machine Conditioning, in: IEEE CIP 2012, Third International Workshop on Cognitive Information Processing, May 28-30 2012, Parador de Baiona, Spain.","mla":"Mönks, Uwe, et al. “An Extended Perspective on Evidential Aggregation Rules in Machine Conditioning.” IEEE CIP 2012, Third International Workshop on Cognitive Information Processing, May 28-30 2012, Parador de Baiona, Spain, 2012, doi:10.1109/CIP.2012.6232905.","bjps":"Mönks U, Voth K and Lohweg V (2012) An Extended Perspective on Evidential Aggregation Rules in Machine Conditioning. IEEE CIP 2012, Third International Workshop on Cognitive Information Processing, May 28-30 2012, Parador de Baiona, Spain.","havard":"U. Mönks, K. Voth, V. Lohweg, An Extended Perspective on Evidential Aggregation Rules in Machine Conditioning, in: IEEE CIP 2012, Third International Workshop on Cognitive Information Processing, May 28-30 2012, Parador de Baiona, Spain, 2012.","short":"U. Mönks, K. Voth, V. Lohweg, in: IEEE CIP 2012, Third International Workshop on Cognitive Information Processing, May 28-30 2012, Parador de Baiona, Spain, 2012.","chicago-de":"Mönks, Uwe, Karl Voth und Volker Lohweg. 2012. An Extended Perspective on Evidential Aggregation Rules in Machine Conditioning. In: IEEE CIP 2012, Third International Workshop on Cognitive Information Processing, May 28-30 2012, Parador de Baiona, Spain. doi:10.1109/CIP.2012.6232905, .","din1505-2-1":"Mönks, Uwe ; Voth, Karl ; Lohweg, Volker: An Extended Perspective on Evidential Aggregation Rules in Machine Conditioning. In: IEEE CIP 2012, Third International Workshop on Cognitive Information Processing, May 28-30 2012, Parador de Baiona, Spain, 2012"},"publication_status":"published","author":[{"full_name":"Mönks, Uwe","first_name":"Uwe","id":"1825","last_name":"Mönks"},{"first_name":"Karl","last_name":"Voth","full_name":"Voth, Karl"},{"orcid":"0000-0002-3325-7887","first_name":"Volker","full_name":"Lohweg, Volker","id":"1804","last_name":"Lohweg"}],"main_file_link":[{"url":"https://ieeexplore.ieee.org/abstract/document/6232905/keywords#keywords"}],"year":2012,"department":[{"_id":"DEP5023"}],"abstract":[{"text":"In this paper we propose a novel, extended perspective on evidential aggregation rules in machine condition monitoring. First, aspects regarding the interconnections between Dempster-Shafer, Fuzzy Set, and Possibility Theory are shown. Subsequently, a novel approach for direct determination of basic probability assignments using Fuzzy membership functions is proposed. Finally, it is applied to a pipe extrusion line's condition monitoring system, considering and reducing pairwise conflicts.","lang":"eng"}],"status":"public","publication_identifier":{"isbn":["978-1-4673-1877-8"],"eissn":["2327-1698 "],"eisbn":["978-1-4673-1878-5"],"issn":["2327-1671 "]},"publication":"IEEE CIP 2012, Third International Workshop on Cognitive Information Processing, May 28-30 2012, Parador de Baiona, Spain","date_created":"2019-12-03T06:40:20Z","type":"conference","user_id":"45673","date_updated":"2023-03-15T13:49:38Z","keyword":["Sensor phenomena and characterization","Production","Sensor fusion","Fuzzy set theory","Conferences","Possibility theory"],"language":[{"iso":"eng"}],"_id":"2107","doi":"10.1109/CIP.2012.6232905"},{"user_id":"45673","date_updated":"2023-03-15T13:49:38Z","date_created":"2019-12-03T06:43:59Z","type":"preprint","_id":"2108","language":[{"iso":"eng"}],"citation":{"ama":"Lohweg V. QS in der Produktion durch Industrielle Bildverarbeitung, 1. Forum Produktion im Maschinenbau NRW, Herausforderungen und Produktionsstrategien für den mittelständischen Maschinenbau im globalen Wettbewerb, 14. Juni 2012, Vortrag, Gütersloh. 2012.","ieee":"V. Lohweg, “QS in der Produktion durch Industrielle Bildverarbeitung, 1. Forum Produktion im Maschinenbau NRW, Herausforderungen und Produktionsstrategien für den mittelständischen Maschinenbau im globalen Wettbewerb, 14. Juni 2012, Vortrag, Gütersloh.” 2012.","short":"V. Lohweg, (2012).","chicago-de":"Lohweg, Volker. 2012. QS in der Produktion durch Industrielle Bildverarbeitung, 1. Forum Produktion im Maschinenbau NRW, Herausforderungen und Produktionsstrategien für den mittelständischen Maschinenbau im globalen Wettbewerb, 14. Juni 2012, Vortrag, Gütersloh.","din1505-2-1":"Lohweg, Volker: QS in der Produktion durch Industrielle Bildverarbeitung, 1. Forum Produktion im Maschinenbau NRW, Herausforderungen und Produktionsstrategien für den mittelständischen Maschinenbau im globalen Wettbewerb, 14. Juni 2012, Vortrag, Gütersloh (2012)","van":"Lohweg V. QS in der Produktion durch Industrielle Bildverarbeitung, 1. Forum Produktion im Maschinenbau NRW, Herausforderungen und Produktionsstrategien für den mittelständischen Maschinenbau im globalen Wettbewerb, 14. Juni 2012, Vortrag, Gütersloh. 2012.","havard":"V. Lohweg, QS in der Produktion durch Industrielle Bildverarbeitung, 1. Forum Produktion im Maschinenbau NRW, Herausforderungen und Produktionsstrategien für den mittelständischen Maschinenbau im globalen Wettbewerb, 14. Juni 2012, Vortrag, Gütersloh, (2012).","mla":"Lohweg, Volker. QS in Der Produktion Durch Industrielle Bildverarbeitung, 1. Forum Produktion Im Maschinenbau NRW, Herausforderungen Und Produktionsstrategien Für Den Mittelständischen Maschinenbau Im Globalen Wettbewerb, 14. Juni 2012, Vortrag, Gütersloh. 2012.","bjps":"Lohweg V (2012) QS in Der Produktion Durch Industrielle Bildverarbeitung, 1. Forum Produktion Im Maschinenbau NRW, Herausforderungen Und Produktionsstrategien Für Den Mittelständischen Maschinenbau Im Globalen Wettbewerb, 14. Juni 2012, Vortrag, Gütersloh.","ufg":"Lohweg, Volker (2012): QS in der Produktion durch Industrielle Bildverarbeitung, 1. Forum Produktion im Maschinenbau NRW, Herausforderungen und Produktionsstrategien für den mittelständischen Maschinenbau im globalen Wettbewerb, 14. Juni 2012, Vortrag, Gütersloh.","apa":"Lohweg, V. (2012). QS in der Produktion durch Industrielle Bildverarbeitung, 1. Forum Produktion im Maschinenbau NRW, Herausforderungen und Produktionsstrategien für den mittelständischen Maschinenbau im globalen Wettbewerb, 14. Juni 2012, Vortrag, Gütersloh.","chicago":"Lohweg, Volker. “QS in Der Produktion Durch Industrielle Bildverarbeitung, 1. Forum Produktion Im Maschinenbau NRW, Herausforderungen Und Produktionsstrategien Für Den Mittelständischen Maschinenbau Im Globalen Wettbewerb, 14. Juni 2012, Vortrag, Gütersloh,” 2012."},"title":"QS in der Produktion durch Industrielle Bildverarbeitung, 1. Forum Produktion im Maschinenbau NRW, Herausforderungen und Produktionsstrategien für den mittelständischen Maschinenbau im globalen Wettbewerb, 14. Juni 2012, Vortrag, Gütersloh","status":"public","abstract":[{"text":"1. Forum Produktion im Maschinenbau NRW, Herausforderungen und Produktionsstrategien für den mittelständischen Maschinenbau im globalen Wettbewerb, 14. Juni 2012, Vortrag, Miele Cie. KG, Gütersloh","lang":"ger"}],"author":[{"id":"1804","first_name":"Volker","full_name":"Lohweg, Volker","last_name":"Lohweg","orcid":"0000-0002-3325-7887"}],"year":2012,"department":[{"_id":"DEP5023"}]},{"_id":"2109","language":[{"iso":"eng"}],"date_updated":"2023-03-15T13:49:38Z","user_id":"45673","date_created":"2019-12-03T06:45:21Z","type":"preprint","status":"public","department":[{"_id":"DEP5023"}],"author":[{"first_name":"Volker","last_name":"Lohweg","full_name":"Lohweg, Volker","id":"1804","orcid":"0000-0002-3325-7887"}],"year":2012,"citation":{"van":"Lohweg V. Authentifikation von Banknoten - Müssen Banknoten intelligent werden?, 5. Executive Technology Meeting, Wincor World 2012, Vortrag, 18.10.2012, A2 Forum, Rheda-Wiedenbrück. 2012.","ufg":"Lohweg, Volker (2012): Authentifikation von Banknoten - Müssen Banknoten intelligent werden?, 5. Executive Technology Meeting, Wincor World 2012, Vortrag, 18.10.2012, A2 Forum, Rheda-Wiedenbrück.","havard":"V. Lohweg, Authentifikation von Banknoten - Müssen Banknoten intelligent werden?, 5. Executive Technology Meeting, Wincor World 2012, Vortrag, 18.10.2012, A2 Forum, Rheda-Wiedenbrück, (2012).","bjps":"Lohweg V (2012) Authentifikation von Banknoten - Müssen Banknoten Intelligent Werden?, 5. Executive Technology Meeting, Wincor World 2012, Vortrag, 18.10.2012, A2 Forum, Rheda-Wiedenbrück.","mla":"Lohweg, Volker. Authentifikation von Banknoten - Müssen Banknoten Intelligent Werden?, 5. Executive Technology Meeting, Wincor World 2012, Vortrag, 18.10.2012, A2 Forum, Rheda-Wiedenbrück. 2012.","apa":"Lohweg, V. (2012). Authentifikation von Banknoten - Müssen Banknoten intelligent werden?, 5. Executive Technology Meeting, Wincor World 2012, Vortrag, 18.10.2012, A2 Forum, Rheda-Wiedenbrück.","chicago":"Lohweg, Volker. “Authentifikation von Banknoten - Müssen Banknoten Intelligent Werden?, 5. Executive Technology Meeting, Wincor World 2012, Vortrag, 18.10.2012, A2 Forum, Rheda-Wiedenbrück,” 2012.","short":"V. Lohweg, (2012).","chicago-de":"Lohweg, Volker. 2012. Authentifikation von Banknoten - Müssen Banknoten intelligent werden?, 5. Executive Technology Meeting, Wincor World 2012, Vortrag, 18.10.2012, A2 Forum, Rheda-Wiedenbrück.","din1505-2-1":"Lohweg, Volker: Authentifikation von Banknoten - Müssen Banknoten intelligent werden?, 5. Executive Technology Meeting, Wincor World 2012, Vortrag, 18.10.2012, A2 Forum, Rheda-Wiedenbrück (2012)","ama":"Lohweg V. Authentifikation von Banknoten - Müssen Banknoten intelligent werden?, 5. Executive Technology Meeting, Wincor World 2012, Vortrag, 18.10.2012, A2 Forum, Rheda-Wiedenbrück. 2012.","ieee":"V. Lohweg, “Authentifikation von Banknoten - Müssen Banknoten intelligent werden?, 5. Executive Technology Meeting, Wincor World 2012, Vortrag, 18.10.2012, A2 Forum, Rheda-Wiedenbrück.” 2012."},"title":"Authentifikation von Banknoten - Müssen Banknoten intelligent werden?, 5. Executive Technology Meeting, Wincor World 2012, Vortrag, 18.10.2012, A2 Forum, Rheda-Wiedenbrück"},{"user_id":"45673","date_updated":"2023-03-15T13:49:38Z","publication":"Forum Maschinenbau Kompakt","type":"conference","date_created":"2019-12-03T06:48:24Z","_id":"2111","place":"Bad Salzuflen","language":[{"iso":"eng"}],"citation":{"ieee":"V. Lohweg, “Vom Produkt zum Prozess - Qualitätssicherung in der Produktion durch industrielle Bildverarbeitung und Mustererkennung,” in Forum Maschinenbau Kompakt, 2012.","ama":"Lohweg V. Vom Produkt zum Prozess - Qualitätssicherung in der Produktion durch industrielle Bildverarbeitung und Mustererkennung. In: Forum Maschinenbau Kompakt. Bad Salzuflen; 2012.","apa":"Lohweg, V. (2012). Vom Produkt zum Prozess - Qualitätssicherung in der Produktion durch industrielle Bildverarbeitung und Mustererkennung. In Forum Maschinenbau Kompakt. Bad Salzuflen.","chicago":"Lohweg, Volker. “Vom Produkt Zum Prozess - Qualitätssicherung in Der Produktion Durch Industrielle Bildverarbeitung Und Mustererkennung.” In Forum Maschinenbau Kompakt. Bad Salzuflen, 2012.","van":"Lohweg V. Vom Produkt zum Prozess - Qualitätssicherung in der Produktion durch industrielle Bildverarbeitung und Mustererkennung. In: Forum Maschinenbau Kompakt. Bad Salzuflen; 2012.","ufg":"Lohweg, Volker (2012): Vom Produkt zum Prozess - Qualitätssicherung in der Produktion durch industrielle Bildverarbeitung und Mustererkennung, in: Forum Maschinenbau Kompakt, Bad Salzuflen.","havard":"V. Lohweg, Vom Produkt zum Prozess - Qualitätssicherung in der Produktion durch industrielle Bildverarbeitung und Mustererkennung, in: Forum Maschinenbau Kompakt, Bad Salzuflen, 2012.","bjps":"Lohweg V (2012) Vom Produkt Zum Prozess - Qualitätssicherung in Der Produktion Durch Industrielle Bildverarbeitung Und Mustererkennung. Forum Maschinenbau Kompakt. Bad Salzuflen.","mla":"Lohweg, Volker. “Vom Produkt Zum Prozess - Qualitätssicherung in Der Produktion Durch Industrielle Bildverarbeitung Und Mustererkennung.” Forum Maschinenbau Kompakt, 2012.","short":"V. Lohweg, in: Forum Maschinenbau Kompakt, Bad Salzuflen, 2012.","din1505-2-1":"Lohweg, Volker: Vom Produkt zum Prozess - Qualitätssicherung in der Produktion durch industrielle Bildverarbeitung und Mustererkennung. In: Forum Maschinenbau Kompakt. Bad Salzuflen, 2012","chicago-de":"Lohweg, Volker. 2012. Vom Produkt zum Prozess - Qualitätssicherung in der Produktion durch industrielle Bildverarbeitung und Mustererkennung. In: Forum Maschinenbau Kompakt. Bad Salzuflen."},"title":"Vom Produkt zum Prozess - Qualitätssicherung in der Produktion durch industrielle Bildverarbeitung und Mustererkennung","status":"public","year":2012,"author":[{"orcid":"0000-0002-3325-7887","first_name":"Volker","last_name":"Lohweg","full_name":"Lohweg, Volker","id":"1804"}],"department":[{"_id":"DEP5023"}]},{"editor":[{"first_name":"Volker","last_name":"Lohweg","id":"1804","full_name":"Lohweg, Volker","orcid":"0000-0002-3325-7887"}],"user_id":"45673","date_updated":"2023-03-15T13:49:38Z","publication_identifier":{"isbn":["978-3-9814062-3-8"]},"date_created":"2019-12-03T06:49:14Z","type":"conference_editor","_id":"2112","language":[{"iso":"eng"}],"citation":{"short":"V. Lohweg, ed., Tagungsband “Bildverarbeitung in Der Automation - BVAu2012,” inIT - Institut für industrielle Imformationstechnik, ISBN 978-3-9814062-3-8, 2012.","din1505-2-1":"Lohweg, V. (Hrsg.): Tagungsband „Bildverarbeitung in der Automation - BVAu2012“ : inIT - Institut für industrielle Imformationstechnik, ISBN 978-3-9814062-3-8, 2012","chicago-de":"Lohweg, Volker, Hrsg. 2012. Tagungsband „Bildverarbeitung in der Automation - BVAu2012“. inIT - Institut für industrielle Imformationstechnik, ISBN 978-3-9814062-3-8.","apa":"Lohweg, V. (Ed.). (2012). Tagungsband “Bildverarbeitung in der Automation - BVAu2012.” inIT - Institut für industrielle Imformationstechnik, ISBN 978-3-9814062-3-8.","ieee":"V. Lohweg, Ed., Tagungsband “Bildverarbeitung in der Automation - BVAu2012.” inIT - Institut für industrielle Imformationstechnik, ISBN 978-3-9814062-3-8, 2012.","chicago":"Lohweg, Volker, ed. Tagungsband “Bildverarbeitung in Der Automation - BVAu2012.” inIT - Institut für industrielle Imformationstechnik, ISBN 978-3-9814062-3-8, 2012.","van":"Lohweg V, editor. Tagungsband “Bildverarbeitung in der Automation - BVAu2012.” inIT - Institut für industrielle Imformationstechnik, ISBN 978-3-9814062-3-8; 2012.","ama":"Lohweg V, ed. Tagungsband “Bildverarbeitung in Der Automation - BVAu2012.” inIT - Institut für industrielle Imformationstechnik, ISBN 978-3-9814062-3-8; 2012.","ufg":"Lohweg, Volker (Hg.) (2012): Tagungsband „Bildverarbeitung in der Automation - BVAu2012“.","havard":"V. Lohweg, ed., Tagungsband “Bildverarbeitung in der Automation - BVAu2012,” inIT - Institut für industrielle Imformationstechnik, ISBN 978-3-9814062-3-8, 2012.","mla":"Lohweg, Volker, editor. Tagungsband “Bildverarbeitung in Der Automation - BVAu2012.” inIT - Institut für industrielle Imformationstechnik, ISBN 978-3-9814062-3-8, 2012.","bjps":"Lohweg V (ed.) (2012) Tagungsband ‘Bildverarbeitung in Der Automation - BVAu2012’. inIT - Institut für industrielle Imformationstechnik, ISBN 978-3-9814062-3-8."},"title":"Tagungsband \"Bildverarbeitung in der Automation - BVAu2012\"","publisher":"inIT - Institut für industrielle Imformationstechnik, ISBN 978-3-9814062-3-8","status":"public","year":2012,"department":[{"_id":"DEP5023"}]},{"department":[{"_id":"DEP5023"}],"author":[{"full_name":"Hempel, Arne-Jens","last_name":"Hempel","first_name":"Arne-Jens"},{"first_name":"Holger","full_name":"Hähnel, Holger","last_name":"Hähnel"},{"first_name":"Uwe","last_name":"Mönks","full_name":"Mönks, Uwe","id":"1825"},{"orcid":"0000-0002-3325-7887","first_name":"Volker","id":"1804","last_name":"Lohweg","full_name":"Lohweg, Volker"}],"year":2012,"abstract":[{"text":"In this paper, we sketch an idea for the integration of singleclass support vector machines (SVM) into fuzzy class learning. As result,we obtain robust and transparent rule-based fuzzy classification models suitable for online-classification tasks. In particular, the singleclass SVM is employed to extend the applicability of convex fuzzy classifica-tion models to nonconvex datainherent structures. The key point of thisextension is the preservation of the interpretability for both, the classlearning and the classification process. The feasibility of the approach isdemonstrated in the context of a banknote authentication application.","lang":"eng"}],"status":"public","publisher":"inIT-Institut für industrielle Informationstechnik","title":"SVM-integrated Fuzzy Pattern Classification for Nonconvex Data-Inherent Structures Applied to Banknote Authentication","citation":{"din1505-2-1":"Hempel, Arne-Jens ; Hähnel, Holger ; Mönks, Uwe ; Lohweg, Volker: SVM-integrated Fuzzy Pattern Classification for Nonconvex Data-Inherent Structures Applied to Banknote Authentication. In: BVAu 2012 - 3. Jahresolloquium „Bildverarbeitung in der Automation“ Centrum Industrial IT, Lemgo, : inIT-Institut für industrielle Informationstechnik, 2012","chicago-de":"Hempel, Arne-Jens, Holger Hähnel, Uwe Mönks und Volker Lohweg. 2012. SVM-integrated Fuzzy Pattern Classification for Nonconvex Data-Inherent Structures Applied to Banknote Authentication. In: BVAu 2012 - 3. Jahresolloquium „Bildverarbeitung in der Automation“ Centrum Industrial IT, Lemgo,. inIT-Institut für industrielle Informationstechnik.","short":"A.-J. Hempel, H. Hähnel, U. Mönks, V. Lohweg, in: BVAu 2012 - 3. Jahresolloquium “Bildverarbeitung in Der Automation” Centrum Industrial IT, Lemgo, inIT-Institut für industrielle Informationstechnik, 2012.","chicago":"Hempel, Arne-Jens, Holger Hähnel, Uwe Mönks, and Volker Lohweg. “SVM-Integrated Fuzzy Pattern Classification for Nonconvex Data-Inherent Structures Applied to Banknote Authentication.” In BVAu 2012 - 3. Jahresolloquium “Bildverarbeitung in Der Automation” Centrum Industrial IT, Lemgo,. inIT-Institut für industrielle Informationstechnik, 2012.","apa":"Hempel, A.-J., Hähnel, H., Mönks, U., & Lohweg, V. (2012). SVM-integrated Fuzzy Pattern Classification for Nonconvex Data-Inherent Structures Applied to Banknote Authentication. In BVAu 2012 - 3. Jahresolloquium “Bildverarbeitung in der Automation” Centrum Industrial IT, Lemgo,. inIT-Institut für industrielle Informationstechnik.","mla":"Hempel, Arne-Jens, et al. “SVM-Integrated Fuzzy Pattern Classification for Nonconvex Data-Inherent Structures Applied to Banknote Authentication.” BVAu 2012 - 3. Jahresolloquium “Bildverarbeitung in Der Automation” Centrum Industrial IT, Lemgo, inIT-Institut für industrielle Informationstechnik, 2012.","havard":"A.-J. Hempel, H. Hähnel, U. Mönks, V. Lohweg, SVM-integrated Fuzzy Pattern Classification for Nonconvex Data-Inherent Structures Applied to Banknote Authentication, in: BVAu 2012 - 3. Jahresolloquium “Bildverarbeitung in Der Automation” Centrum Industrial IT, Lemgo, inIT-Institut für industrielle Informationstechnik, 2012.","bjps":"Hempel A-J et al. (2012) SVM-Integrated Fuzzy Pattern Classification for Nonconvex Data-Inherent Structures Applied to Banknote Authentication. BVAu 2012 - 3. Jahresolloquium ‘Bildverarbeitung in Der Automation’ Centrum Industrial IT, Lemgo,. inIT-Institut für industrielle Informationstechnik.","ufg":"Hempel, Arne-Jens et. al. (2012): SVM-integrated Fuzzy Pattern Classification for Nonconvex Data-Inherent Structures Applied to Banknote Authentication, in: BVAu 2012 - 3. Jahresolloquium „Bildverarbeitung in der Automation“ Centrum Industrial IT, Lemgo,.","van":"Hempel A-J, Hähnel H, Mönks U, Lohweg V. SVM-integrated Fuzzy Pattern Classification for Nonconvex Data-Inherent Structures Applied to Banknote Authentication. In: BVAu 2012 - 3 Jahresolloquium “Bildverarbeitung in der Automation” Centrum Industrial IT, Lemgo,. inIT-Institut für industrielle Informationstechnik; 2012.","ieee":"A.-J. Hempel, H. Hähnel, U. Mönks, and V. Lohweg, “SVM-integrated Fuzzy Pattern Classification for Nonconvex Data-Inherent Structures Applied to Banknote Authentication,” in BVAu 2012 - 3. Jahresolloquium “Bildverarbeitung in der Automation” Centrum Industrial IT, Lemgo, 2012.","ama":"Hempel A-J, Hähnel H, Mönks U, Lohweg V. SVM-integrated Fuzzy Pattern Classification for Nonconvex Data-Inherent Structures Applied to Banknote Authentication. In: BVAu 2012 - 3. Jahresolloquium “Bildverarbeitung in Der Automation” Centrum Industrial IT, Lemgo,. inIT-Institut für industrielle Informationstechnik; 2012."},"language":[{"iso":"eng"}],"keyword":["fuzzy classification","pattern recognition","single-class support vector machine","data mining"],"_id":"2113","type":"conference","date_created":"2019-12-03T06:50:52Z","publication":"BVAu 2012 - 3. Jahresolloquium \"Bildverarbeitung in der Automation\" Centrum Industrial IT, Lemgo,","date_updated":"2023-03-15T13:49:38Z","user_id":"45673"},{"abstract":[{"text":"Since the development of the first computers (and even before), there is a steady growth of available digital data and information. E.g. estimations say that the amount of digital information will grow about 50 percent in the year 2012 compared to the year 2011. Following the rising availability of digital data, there is also an inherent need for methods to transport these data, as the data is to be used and processed at some time. Many methods and channels are available for the transportation of these digital data. This research work presents the foundation work for the new microIDENT coding (2D-code) for document authentication. As a coding for document authentication it is one objective of microIDENT, to increase the difficulty of copying a document without the destruction of the coding. The new coding requires, in comparison to other 2D-codes, less space when printed. This is achieved by omitting some of the features that are used in standard 2D-codes for stabilisation and that are necessary in a mobile environment. In addition, we will also show that this new 2D-code delivers, under certain constraints, a better performance than other 2D-codes. ","lang":"eng"}],"department":[{"_id":"DEP5023"}],"year":2012,"ddc":["600"],"author":[{"first_name":"Jan-Friedrich","last_name":"Ehlenbröker","id":"1852","full_name":"Ehlenbröker, Jan-Friedrich"},{"orcid":"0000-0002-3325-7887","first_name":"Volker","id":"1804","last_name":"Lohweg","full_name":"Lohweg, Volker"}],"publisher":"inIT-Institut für industrielle Informationstechnik","status":"public","title":"Video-Based Data Transfer for Document Authentication","publication_status":"published","file":[{"access_level":"closed","relation":"main_file","creator":"6bl-f5s","date_updated":"2019-12-03T06:54:49Z","file_id":"2115","file_size":551584,"date_created":"2019-12-03T06:54:49Z","file_name":"lohweg_viedo.pdf","content_type":"application/pdf"}],"citation":{"short":"J.-F. Ehlenbröker, V. Lohweg, in: BVAu 2012 - 3. Jahresolloquium “Bildverarbeitung in Der Automation” Centrum Industrial IT, Lemgo, inIT-Institut für industrielle Informationstechnik, 2012.","din1505-2-1":"Ehlenbröker, Jan-Friedrich ; Lohweg, Volker: Video-Based Data Transfer for Document Authentication. In: BVAu 2012 - 3. Jahresolloquium „Bildverarbeitung in der Automation“ Centrum Industrial IT, Lemgo, : inIT-Institut für industrielle Informationstechnik, 2012","chicago-de":"Ehlenbröker, Jan-Friedrich und Volker Lohweg. 2012. Video-Based Data Transfer for Document Authentication. In: BVAu 2012 - 3. Jahresolloquium „Bildverarbeitung in der Automation“ Centrum Industrial IT, Lemgo,. inIT-Institut für industrielle Informationstechnik.","apa":"Ehlenbröker, J.-F., & Lohweg, V. (2012). Video-Based Data Transfer for Document Authentication. In BVAu 2012 - 3. Jahresolloquium “Bildverarbeitung in der Automation” Centrum Industrial IT, Lemgo,. inIT-Institut für industrielle Informationstechnik.","ieee":"J.-F. Ehlenbröker and V. Lohweg, “Video-Based Data Transfer for Document Authentication,” in BVAu 2012 - 3. Jahresolloquium “Bildverarbeitung in der Automation” Centrum Industrial IT, Lemgo, 2012.","chicago":"Ehlenbröker, Jan-Friedrich, and Volker Lohweg. “Video-Based Data Transfer for Document Authentication.” In BVAu 2012 - 3. Jahresolloquium “Bildverarbeitung in Der Automation” Centrum Industrial IT, Lemgo,. inIT-Institut für industrielle Informationstechnik, 2012.","van":"Ehlenbröker J-F, Lohweg V. Video-Based Data Transfer for Document Authentication. In: BVAu 2012 - 3 Jahresolloquium “Bildverarbeitung in der Automation” Centrum Industrial IT, Lemgo,. inIT-Institut für industrielle Informationstechnik; 2012.","ama":"Ehlenbröker J-F, Lohweg V. Video-Based Data Transfer for Document Authentication. In: BVAu 2012 - 3. Jahresolloquium “Bildverarbeitung in Der Automation” Centrum Industrial IT, Lemgo,. inIT-Institut für industrielle Informationstechnik; 2012.","ufg":"Ehlenbröker, Jan-Friedrich/Lohweg, Volker (2012): Video-Based Data Transfer for Document Authentication, in: BVAu 2012 - 3. Jahresolloquium „Bildverarbeitung in der Automation“ Centrum Industrial IT, Lemgo,.","mla":"Ehlenbröker, Jan-Friedrich, and Volker Lohweg. “Video-Based Data Transfer for Document Authentication.” BVAu 2012 - 3. Jahresolloquium “Bildverarbeitung in Der Automation” Centrum Industrial IT, Lemgo, inIT-Institut für industrielle Informationstechnik, 2012.","havard":"J.-F. Ehlenbröker, V. Lohweg, Video-Based Data Transfer for Document Authentication, in: BVAu 2012 - 3. Jahresolloquium “Bildverarbeitung in Der Automation” Centrum Industrial IT, Lemgo, inIT-Institut für industrielle Informationstechnik, 2012.","bjps":"Ehlenbröker J-F and Lohweg V (2012) Video-Based Data Transfer for Document Authentication. BVAu 2012 - 3. Jahresolloquium ‘Bildverarbeitung in Der Automation’ Centrum Industrial IT, Lemgo,. inIT-Institut für industrielle Informationstechnik."},"has_accepted_license":"1","_id":"2114","language":[{"iso":"eng"}],"keyword":["Authentifikation","Automation","Datentransfer","Digitale Daten","Zerstörung"],"date_created":"2019-12-03T06:53:56Z","type":"conference","publication":"BVAu 2012 - 3. Jahresolloquium \"Bildverarbeitung in der Automation\" Centrum Industrial IT, Lemgo,","publication_identifier":{"isbn":["978-3-9814062-3-8"]},"file_date_updated":"2019-12-03T06:54:49Z","date_updated":"2023-03-15T13:49:38Z","user_id":"45673"},{"title":"Smartphones as Smart Cameras – Is It Possible?","citation":{"havard":"E. Gillich, R. Hildebrand, J.L. Hoffmann, H. Dörksen, V. Lohweg, Smartphones as Smart Cameras – Is It Possible?, in: BVAu 2012 - 3. Jahreskolloquium “Bildverarbeitung in Der Automation” Centrum Industrial IT, Lemgo, inIT-Institut für industrielle Informationstechnik, 2012.","bjps":"Gillich E et al. (2012) Smartphones as Smart Cameras – Is It Possible? BVAu 2012 - 3. Jahreskolloquium ‘Bildverarbeitung in Der Automation’ Centrum Industrial IT, Lemgo,. inIT-Institut für industrielle Informationstechnik.","mla":"Gillich, Eugen, et al. “Smartphones as Smart Cameras – Is It Possible?” BVAu 2012 - 3. Jahreskolloquium “Bildverarbeitung in Der Automation” Centrum Industrial IT, Lemgo, inIT-Institut für industrielle Informationstechnik, 2012.","ufg":"Gillich, Eugen et. al. (2012): Smartphones as Smart Cameras – Is It Possible?, in: BVAu 2012 - 3. Jahreskolloquium „Bildverarbeitung in der Automation“ Centrum Industrial IT, Lemgo,.","ama":"Gillich E, Hildebrand R, Hoffmann JL, Dörksen H, Lohweg V. Smartphones as Smart Cameras – Is It Possible? In: BVAu 2012 - 3. Jahreskolloquium “Bildverarbeitung in Der Automation” Centrum Industrial IT, Lemgo,. inIT-Institut für industrielle Informationstechnik; 2012.","van":"Gillich E, Hildebrand R, Hoffmann JL, Dörksen H, Lohweg V. Smartphones as Smart Cameras – Is It Possible? In: BVAu 2012 - 3 Jahreskolloquium “Bildverarbeitung in der Automation” Centrum Industrial IT, Lemgo,. inIT-Institut für industrielle Informationstechnik; 2012.","chicago":"Gillich, Eugen, Roland Hildebrand, Jan Leif Hoffmann, Helene Dörksen, and Volker Lohweg. “Smartphones as Smart Cameras – Is It Possible?” In BVAu 2012 - 3. Jahreskolloquium “Bildverarbeitung in Der Automation” Centrum Industrial IT, Lemgo,. inIT-Institut für industrielle Informationstechnik, 2012.","ieee":"E. Gillich, R. Hildebrand, J. L. Hoffmann, H. Dörksen, and V. Lohweg, “Smartphones as Smart Cameras – Is It Possible?,” in BVAu 2012 - 3. Jahreskolloquium “Bildverarbeitung in der Automation” Centrum Industrial IT, Lemgo, 2012.","apa":"Gillich, E., Hildebrand, R., Hoffmann, J. L., Dörksen, H., & Lohweg, V. (2012). Smartphones as Smart Cameras – Is It Possible? In BVAu 2012 - 3. Jahreskolloquium “Bildverarbeitung in der Automation” Centrum Industrial IT, Lemgo,. inIT-Institut für industrielle Informationstechnik.","chicago-de":"Gillich, Eugen, Roland Hildebrand, Jan Leif Hoffmann, Helene Dörksen und Volker Lohweg. 2012. Smartphones as Smart Cameras – Is It Possible? In: BVAu 2012 - 3. Jahreskolloquium „Bildverarbeitung in der Automation“ Centrum Industrial IT, Lemgo,. inIT-Institut für industrielle Informationstechnik.","din1505-2-1":"Gillich, Eugen ; Hildebrand, Roland ; Hoffmann, Jan Leif ; Dörksen, Helene ; Lohweg, Volker: Smartphones as Smart Cameras – Is It Possible? In: BVAu 2012 - 3. Jahreskolloquium „Bildverarbeitung in der Automation“ Centrum Industrial IT, Lemgo, : inIT-Institut für industrielle Informationstechnik, 2012","short":"E. Gillich, R. Hildebrand, J.L. Hoffmann, H. Dörksen, V. Lohweg, in: BVAu 2012 - 3. Jahreskolloquium “Bildverarbeitung in Der Automation” Centrum Industrial IT, Lemgo, inIT-Institut für industrielle Informationstechnik, 2012."},"publication_status":"published","abstract":[{"text":"Favored by hardware development, since the mid-2000s, cameras can be found in mobile phones. With the advent of the Apple iPhonethey are equipped with a multi-touch high-resolution display. Their included battery and low costs make them attractive for smart cameraapplications. This paper shows several scenarios, in which advantagesand disadvantages of smartphones are inspected. A real-life applicationis given, which shows that a phone of this kind can be used for printinspection and banknote authentication","lang":"eng"}],"year":2012,"author":[{"full_name":"Gillich, Eugen","first_name":"Eugen","id":"1706","last_name":"Gillich"},{"full_name":"Hildebrand, Roland","id":"1639","first_name":"Roland","last_name":"Hildebrand"},{"first_name":"Jan Leif","id":"46243","full_name":"Hoffmann, Jan Leif","last_name":"Hoffmann"},{"first_name":"Helene","last_name":"Dörksen","full_name":"Dörksen, Helene","id":"46416"},{"full_name":"Lohweg, Volker","first_name":"Volker","id":"1804","last_name":"Lohweg","orcid":"0000-0002-3325-7887"}],"department":[{"_id":"DEP5023"}],"publisher":"inIT-Institut für industrielle Informationstechnik","status":"public","publication":"BVAu 2012 - 3. Jahreskolloquium \"Bildverarbeitung in der Automation\" Centrum Industrial IT, Lemgo,","type":"conference","date_created":"2019-12-03T06:56:37Z","user_id":"45673","date_updated":"2023-03-15T13:49:38Z","_id":"2116","keyword":["smart camera","smartphones","banknotes","authentication"],"language":[{"iso":"eng"}]},{"publisher":"VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA)","abstract":[{"lang":"eng","text":"The present work aims at a statistically motivated parameterisation for a fuzzy classification approach. Its key points are the determination of robust parameterisations for the data-driven fuzzy class learning based an statistical analyses as well as the preservation of the interpretability of the fuzzy class models and the classification process. In particular, order statistics and Monte Carlo methods are used to determine distributions and moments of class border parameters. These distributions and moments are further applied to evaluate the robustness of parameters of the current fuzzy classification model and to propose alternative robust parameterisations. The feasibility of the approach is demonstrated in the context of a machine diagnosis application."}],"department":[{"_id":"DEP5023"}],"ddc":["600"],"file":[{"file_id":"2118","file_size":728201,"file_name":"lohweg_integration.pdf","content_type":"application/pdf","date_created":"2019-12-03T07:00:42Z","relation":"main_file","creator":"6bl-f5s","date_updated":"2019-12-03T07:00:42Z","access_level":"closed"}],"_id":"2117","place":"Düsseldorf","has_accepted_license":"1","user_id":"45673","type":"conference","page":"115-131","status":"public","author":[{"last_name":"Hähnel","first_name":"Holger","full_name":"Hähnel, Holger"},{"last_name":"Hempel","first_name":"Arne-Jens","full_name":"Hempel, Arne-Jens"},{"first_name":"Uwe","full_name":"Mönks, Uwe","last_name":"Mönks","id":"1825"},{"orcid":"0000-0002-3325-7887","first_name":"Volker","last_name":"Lohweg","id":"1804","full_name":"Lohweg, Volker"}],"year":2012,"citation":{"short":"H. Hähnel, A.-J. Hempel, U. Mönks, V. Lohweg, in: E. Hüllermeier, F. Hoffmann (Eds.), 22. Workshop Computational Intelligence, 06.-7.12.2012, Dortmund , VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), Düsseldorf, 2012, pp. 115–131.","din1505-2-1":"Hähnel, Holger ; Hempel, Arne-Jens ; Mönks, Uwe ; Lohweg, Volker: Integration of Statistical Analyses for Parametrisation of the Fuzzy Pattern Classification. In: Hüllermeier, E. ; Hoffmann, F. (Hrsg.): 22. Workshop Computational Intelligence, 06.-7.12.2012, Dortmund . Düsseldorf : VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 2012, S. 115–131","chicago-de":"Hähnel, Holger, Arne-Jens Hempel, Uwe Mönks und Volker Lohweg. 2012. Integration of Statistical Analyses for Parametrisation of the Fuzzy Pattern Classification. In: 22. Workshop Computational Intelligence, 06.-7.12.2012, Dortmund , hg. von Eike Hüllermeier und Frank Hoffmann, 115–131. Düsseldorf: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA).","van":"Hähnel H, Hempel A-J, Mönks U, Lohweg V. Integration of Statistical Analyses for Parametrisation of the Fuzzy Pattern Classification. In: Hüllermeier E, Hoffmann F, editors. 22 Workshop Computational Intelligence, 06-7122012, Dortmund . Düsseldorf: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA); 2012. p. 115–31.","ufg":"Hähnel, Holger et. al. (2012): Integration of Statistical Analyses for Parametrisation of the Fuzzy Pattern Classification, in: Eike Hüllermeier/Frank Hoffmann (Hgg.): 22. Workshop Computational Intelligence, 06.-7.12.2012, Dortmund , Düsseldorf, S. 115–131.","havard":"H. Hähnel, A.-J. Hempel, U. Mönks, V. Lohweg, Integration of Statistical Analyses for Parametrisation of the Fuzzy Pattern Classification, in: E. Hüllermeier, F. Hoffmann (Eds.), 22. Workshop Computational Intelligence, 06.-7.12.2012, Dortmund , VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), Düsseldorf, 2012: pp. 115–131.","bjps":"Hähnel H et al. (2012) Integration of Statistical Analyses for Parametrisation of the Fuzzy Pattern Classification. In Hüllermeier E and Hoffmann F (eds), 22. Workshop Computational Intelligence, 06.-7.12.2012, Dortmund . Düsseldorf: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), pp. 115–131.","mla":"Hähnel, Holger, et al. “Integration of Statistical Analyses for Parametrisation of the Fuzzy Pattern Classification.” 22. Workshop Computational Intelligence, 06.-7.12.2012, Dortmund , edited by Eike Hüllermeier and Frank Hoffmann, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 2012, pp. 115–31.","apa":"Hähnel, H., Hempel, A.-J., Mönks, U., & Lohweg, V. (2012). Integration of Statistical Analyses for Parametrisation of the Fuzzy Pattern Classification. In E. Hüllermeier & F. Hoffmann (Eds.), 22. Workshop Computational Intelligence, 06.-7.12.2012, Dortmund (pp. 115–131). Düsseldorf: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA).","chicago":"Hähnel, Holger, Arne-Jens Hempel, Uwe Mönks, and Volker Lohweg. “Integration of Statistical Analyses for Parametrisation of the Fuzzy Pattern Classification.” In 22. Workshop Computational Intelligence, 06.-7.12.2012, Dortmund , edited by Eike Hüllermeier and Frank Hoffmann, 115–31. Düsseldorf: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 2012.","ama":"Hähnel H, Hempel A-J, Mönks U, Lohweg V. Integration of Statistical Analyses for Parametrisation of the Fuzzy Pattern Classification. In: Hüllermeier E, Hoffmann F, eds. 22. Workshop Computational Intelligence, 06.-7.12.2012, Dortmund . Düsseldorf: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA); 2012:115-131.","ieee":"H. Hähnel, A.-J. Hempel, U. Mönks, and V. Lohweg, “Integration of Statistical Analyses for Parametrisation of the Fuzzy Pattern Classification,” in 22. Workshop Computational Intelligence, 06.-7.12.2012, Dortmund , 2012, pp. 115–131."},"title":"Integration of Statistical Analyses for Parametrisation of the Fuzzy Pattern Classification","language":[{"iso":"eng"}],"keyword":["Fuzzy-Regelung"],"editor":[{"last_name":"Hüllermeier","first_name":"Eike ","full_name":"Hüllermeier, Eike "},{"first_name":"Frank","full_name":"Hoffmann, Frank","last_name":"Hoffmann"}],"file_date_updated":"2019-12-03T07:00:42Z","date_updated":"2023-03-15T13:49:38Z","date_created":"2019-12-03T06:59:40Z","publication":"22. Workshop Computational Intelligence, 06.-7.12.2012, Dortmund ","publication_identifier":{"isbn":["978-3-86644-917-6"]}},{"user_id":"45673","type":"conference","place":"Düsseldorf","_id":"2119","has_accepted_license":"1","file":[{"file_name":"lohweg_feature.pdf","content_type":"application/pdf","date_created":"2019-12-03T07:03:37Z","file_size":580127,"file_id":"2120","date_updated":"2019-12-03T07:03:37Z","relation":"main_file","creator":"6bl-f5s","access_level":"closed"}],"publication_status":"published","publisher":"VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA)","department":[{"_id":"DEP5023"}],"ddc":["600"],"abstract":[{"text":"In this paper, it is proposed a feature selection procedure based on Linear Discriminant Analysis. The aim behind this approach is to obtain a minimal set of features still enabling a separation between a number of different classes. Additionally, the reduced number of features implies faster computation and enables resource-limited hardware implementations for real-time signal processing applications. Also, incorporating only a small number of features retains the application's interpretability as a feature space of maximum three features can be visualised directly. Due to this, an expert can directly follow a decision system's answer. The proposed method has been evaluated in the context of an electric drive diagnosis application. In this scope, the LDA feature selection approach is at least as good as the benchmarked feature selection methods. When regarding only a minimal number of features, LDA outperforms the other approaches in terms of classification accuracy. As a secondary result. one can see how important a sensible choice of features is. While some arbitrary combinations produce completely inseparable feature spaces. Three are still combinations that can separate the classes even linearly such that no sophisticated classification concept (e.g. SVM) is needed. The authors are aware of the fact that the findings are shown only in the context of one specific application. Based on the work elaborated here, further research towards generalisation of the proposed approach is intended to be carried out. Additionally, the findings shall be examined using classifier concepts different from SVM, such as Fuzzy Pattern Classifiers.","lang":"eng"}],"date_updated":"2023-03-15T13:49:38Z","editor":[{"first_name":"Eike Hüllermeier","last_name":"Frank Hoffmann","full_name":"Frank Hoffmann, Eike Hüllermeier"}],"file_date_updated":"2019-12-03T07:03:37Z","date_created":"2019-12-03T07:02:29Z","publication_identifier":{"isbn":["978-3-86644-917-6"]},"publication":"22. Workshop Computational Intelligence, 06.-7.12.2012, Dortmund","language":[{"iso":"eng"}],"citation":{"ieee":"M. Bator, A. Dicks, U. Mönks, and V. Lohweg, “Feature Extraction and Reduction Applied to Sensorless Drive Diagnosis,” in 22. Workshop Computational Intelligence, 06.-7.12.2012, Dortmund, 2012, pp. 163–177.","ama":"Bator M, Dicks A, Mönks U, Lohweg V. Feature Extraction and Reduction Applied to Sensorless Drive Diagnosis. In: Frank Hoffmann EH, ed. 22. Workshop Computational Intelligence, 06.-7.12.2012, Dortmund. Düsseldorf: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA); 2012:163-177.","short":"M. Bator, A. Dicks, U. Mönks, V. Lohweg, in: E.H. Frank Hoffmann (Ed.), 22. Workshop Computational Intelligence, 06.-7.12.2012, Dortmund, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), Düsseldorf, 2012, pp. 163–177.","din1505-2-1":"Bator, Martyna ; Dicks, Alexander ; Mönks, Uwe ; Lohweg, Volker: Feature Extraction and Reduction Applied to Sensorless Drive Diagnosis. In: Frank Hoffmann, E. H. (Hrsg.): 22. Workshop Computational Intelligence, 06.-7.12.2012, Dortmund. Düsseldorf : VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 2012, S. 163–177","chicago-de":"Bator, Martyna, Alexander Dicks, Uwe Mönks und Volker Lohweg. 2012. Feature Extraction and Reduction Applied to Sensorless Drive Diagnosis. In: 22. Workshop Computational Intelligence, 06.-7.12.2012, Dortmund, hg. von Eike Hüllermeier Frank Hoffmann, 163–177. Düsseldorf: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA).","apa":"Bator, M., Dicks, A., Mönks, U., & Lohweg, V. (2012). Feature Extraction and Reduction Applied to Sensorless Drive Diagnosis. In E. H. Frank Hoffmann (Ed.), 22. Workshop Computational Intelligence, 06.-7.12.2012, Dortmund (pp. 163–177). Düsseldorf: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA).","chicago":"Bator, Martyna, Alexander Dicks, Uwe Mönks, and Volker Lohweg. “Feature Extraction and Reduction Applied to Sensorless Drive Diagnosis.” In 22. Workshop Computational Intelligence, 06.-7.12.2012, Dortmund, edited by Eike Hüllermeier Frank Hoffmann, 163–77. Düsseldorf: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 2012.","van":"Bator M, Dicks A, Mönks U, Lohweg V. Feature Extraction and Reduction Applied to Sensorless Drive Diagnosis. In: Frank Hoffmann EH, editor. 22 Workshop Computational Intelligence, 06-7122012, Dortmund. Düsseldorf: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA); 2012. p. 163–77.","mla":"Bator, Martyna, et al. “Feature Extraction and Reduction Applied to Sensorless Drive Diagnosis.” 22. Workshop Computational Intelligence, 06.-7.12.2012, Dortmund, edited by Eike Hüllermeier Frank Hoffmann, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 2012, pp. 163–77.","havard":"M. Bator, A. Dicks, U. Mönks, V. Lohweg, Feature Extraction and Reduction Applied to Sensorless Drive Diagnosis, in: E.H. Frank Hoffmann (Ed.), 22. Workshop Computational Intelligence, 06.-7.12.2012, Dortmund, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), Düsseldorf, 2012: pp. 163–177.","bjps":"Bator M et al. (2012) Feature Extraction and Reduction Applied to Sensorless Drive Diagnosis. In Frank Hoffmann EH (ed.), 22. Workshop Computational Intelligence, 06.-7.12.2012, Dortmund. Düsseldorf: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), pp. 163–177.","ufg":"Bator, Martyna et. al. (2012): Feature Extraction and Reduction Applied to Sensorless Drive Diagnosis, in: Eike Hüllermeier Frank Hoffmann (Hg.): 22. Workshop Computational Intelligence, 06.-7.12.2012, Dortmund, Düsseldorf, S. 163–177."},"title":"Feature Extraction and Reduction Applied to Sensorless Drive Diagnosis","page":"163-177","status":"public","year":2012,"author":[{"id":"46440","full_name":"Bator, Martyna","first_name":"Martyna","last_name":"Bator"},{"last_name":"Dicks","first_name":"Alexander","id":"1853","full_name":"Dicks, Alexander"},{"full_name":"Mönks, Uwe","first_name":"Uwe","id":"1825","last_name":"Mönks"},{"id":"1804","first_name":"Volker","last_name":"Lohweg","full_name":"Lohweg, Volker","orcid":"0000-0002-3325-7887"}]},{"citation":{"apa":"Schulte, T., Puschmann, F., & Kiffe, A. (2012). Leistungselektronikmodelle für Hardware-in-the-Loop-Simulation. Presented at the SPS/IPC/Drives 2012, Nürnberg: VDE-Verlag.","chicago":"Schulte, Thomas, F. Puschmann, and Axel Kiffe. “Leistungselektronikmodelle für Hardware-in-the-Loop-Simulation.” VDE-Verlag, 2012.","van":"Schulte T, Puschmann F, Kiffe A. Leistungselektronikmodelle für Hardware-in-the-Loop-Simulation. In VDE-Verlag; 2012.","ufg":"Schulte, Thomas et. al. (2012): Leistungselektronikmodelle für Hardware-in-the-Loop-Simulation, in: .","bjps":"Schulte T, Puschmann F and Kiffe A (2012) Leistungselektronikmodelle für Hardware-in-the-Loop-Simulation. VDE-Verlag.","havard":"T. Schulte, F. Puschmann, A. Kiffe, Leistungselektronikmodelle für Hardware-in-the-Loop-Simulation, in: VDE-Verlag, 2012.","mla":"Schulte, Thomas, et al. Leistungselektronikmodelle für Hardware-in-the-Loop-Simulation. VDE-Verlag, 2012.","short":"T. Schulte, F. Puschmann, A. Kiffe, in: VDE-Verlag, 2012.","chicago-de":"Schulte, Thomas, F. Puschmann und Axel Kiffe. 2012. Leistungselektronikmodelle für Hardware-in-the-Loop-Simulation. In: . VDE-Verlag.","din1505-2-1":"Schulte, Thomas ; Puschmann, F. ; Kiffe, Axel: Leistungselektronikmodelle für Hardware-in-the-Loop-Simulation. In: : VDE-Verlag, 2012","ieee":"T. Schulte, F. Puschmann, and A. Kiffe, “Leistungselektronikmodelle für Hardware-in-the-Loop-Simulation,” presented at the SPS/IPC/Drives 2012, Nürnberg, 2012.","ama":"Schulte T, Puschmann F, Kiffe A. Leistungselektronikmodelle für Hardware-in-the-Loop-Simulation. In: VDE-Verlag; 2012."},"title":"Leistungselektronikmodelle für Hardware-in-the-Loop-Simulation","publisher":"VDE-Verlag","status":"public","author":[{"first_name":"Thomas","full_name":"Schulte, Thomas","last_name":"Schulte","id":"46242"},{"first_name":"F.","full_name":"Puschmann, F.","last_name":"Puschmann"},{"first_name":"Axel","last_name":"Kiffe","full_name":"Kiffe, Axel","id":"59764"}],"year":2012,"conference":{"location":"Nürnberg","name":"SPS/IPC/Drives 2012","end_date":"2012-11-29","start_date":"2012-11-27"},"department":[{"_id":"DEP6020"}],"user_id":"74004","date_updated":"2023-03-15T13:49:49Z","date_created":"2020-11-19T13:13:15Z","type":"conference","_id":"3973","language":[{"iso":"ger"}]},{"abstract":[{"text":"Hybrid electric powertrains are developed for reducing the fuel consumption and the emission of carbon dioxide. In order to support this aim, the applied control strategy can be improved by testing and developing the electronic control units by means of Hardware-in-the-Loop simulation. For the simulation, a corresponding real-time model of the powertrain is required. The development of the model is a time-consuming task due to the high dynamics and switching frequencies in the electrical subsystem, comprising the electric drives, inverter and battery and due to the various configurations of the mechanical subsystem, comprising the transmissions. In this contribution, a method for an efficient modeling of different transmission configurations for power-split systems and different types of inverter is presented. Besides the required real-time capability, the models consider the correct power flows and power losses. The presented approach is proven by means of simulation results.","lang":"eng"}],"year":2012,"author":[{"id":"43696","full_name":"Geng, Stefan","last_name":"Geng","first_name":"Stefan"},{"first_name":"Thomas","last_name":"Schulte","id":"46242","full_name":"Schulte, Thomas"}],"conference":{"name":"1st Biannual International Conference on Powertrain Modelling and Control, PMC","location":"West Yorkshire (Großbritannien)"},"department":[{"_id":"DEP6020"}],"status":"public","title":"Real-Time Models of Hybrid Powertrain Transmissions","citation":{"ieee":"S. Geng and T. Schulte, “Real-Time Models of Hybrid Powertrain Transmissions,” presented at the 1st Biannual International Conference on Powertrain Modelling and Control, PMC, West Yorkshire (Großbritannien), 2012.","ama":"Geng S, Schulte T. Real-Time Models of Hybrid Powertrain Transmissions. In: ; 2012.","apa":"Geng, S., & Schulte, T. (2012). Real-Time Models of Hybrid Powertrain Transmissions. Presented at the 1st Biannual International Conference on Powertrain Modelling and Control, PMC, West Yorkshire (Großbritannien).","chicago":"Geng, Stefan, and Thomas Schulte. “Real-Time Models of Hybrid Powertrain Transmissions,” 2012.","van":"Geng S, Schulte T. Real-Time Models of Hybrid Powertrain Transmissions. In 2012.","bjps":"Geng S and Schulte T (2012) Real-Time Models of Hybrid Powertrain Transmissions.","havard":"S. Geng, T. Schulte, Real-Time Models of Hybrid Powertrain Transmissions, in: 2012.","mla":"Geng, Stefan, and Thomas Schulte. Real-Time Models of Hybrid Powertrain Transmissions. 2012.","ufg":"Geng, Stefan/Schulte, Thomas (2012): Real-Time Models of Hybrid Powertrain Transmissions, in: .","short":"S. Geng, T. Schulte, in: 2012.","din1505-2-1":"Geng, Stefan ; Schulte, Thomas: Real-Time Models of Hybrid Powertrain Transmissions. In: , 2012","chicago-de":"Geng, Stefan und Thomas Schulte. 2012. Real-Time Models of Hybrid Powertrain Transmissions. In: ."},"_id":"3974","language":[{"iso":"eng"}],"type":"conference","date_created":"2020-11-19T13:21:59Z","user_id":"74004","date_updated":"2023-03-15T13:49:49Z"},{"publisher":"IEEE","status":"public","abstract":[{"text":"Power electronic devices are growing in importance in automotive applications. Power converters are used in hybrid electric vehicles but also in other vehicle applications like electric steering systems. For testing electronic equipment, hardware-in-the-loop simulation is a today's standard method in the automotive industry. It always requires a real-time simulation of the plant. For testing the electronic control units of power electronics, real-time capable models of power electronic circuits need to be developed, accordingly. This paper presents an approach for an automated generation of a FPGA-based oversampling model of power electronic circuits. Two types of modeling methods for considering the nonlinear switching behavior will be compared. For applying the oversampling approach a generator is presented, which automates a FPGA-based implementation of the circuit model. The approach is proven by simulation and measurement results.","lang":"eng"}],"conference":{"start_date":"2012-09-04","end_date":"2012-09-06","name":"Proc. of 15th Int. Power Electronics and Motion Control Conf. (EPE-PEMC 2012 ECCE Europe)","location":"Novi Sad (Serbien)"},"department":[{"_id":"DEP6020"}],"year":2012,"author":[{"id":"59764","last_name":"Kiffe","full_name":"Kiffe, Axel","first_name":"Axel"},{"last_name":"Geng","full_name":"Geng, Stefan","id":"43696","first_name":"Stefan"},{"first_name":"Thomas","id":"46242","last_name":"Schulte","full_name":"Schulte, Thomas"}],"citation":{"short":"A. Kiffe, S. Geng, T. Schulte, in: 2012 Proceedings of the 15th IEEE Holm Conference on Electrical Contacts, IEEE, 2012.","din1505-2-1":"Kiffe, Axel ; Geng, Stefan ; Schulte, Thomas: Automated Generation of a FPGA-based Oversampling Model of Power Electronic Circuits . In: 2012 Proceedings of the 15th IEEE Holm Conference on Electrical Contacts : IEEE, 2012","chicago-de":"Kiffe, Axel, Stefan Geng und Thomas Schulte. 2012. Automated Generation of a FPGA-based Oversampling Model of Power Electronic Circuits . In: 2012 Proceedings of the 15th IEEE Holm Conference on Electrical Contacts. IEEE.","apa":"Kiffe, A., Geng, S., & Schulte, T. (2012). Automated Generation of a FPGA-based Oversampling Model of Power Electronic Circuits . In 2012 Proceedings of the 15th IEEE Holm Conference on Electrical Contacts. Novi Sad (Serbien): IEEE.","chicago":"Kiffe, Axel, Stefan Geng, and Thomas Schulte. “Automated Generation of a FPGA-Based Oversampling Model of Power Electronic Circuits .” In 2012 Proceedings of the 15th IEEE Holm Conference on Electrical Contacts. IEEE, 2012.","van":"Kiffe A, Geng S, Schulte T. Automated Generation of a FPGA-based Oversampling Model of Power Electronic Circuits . In: 2012 Proceedings of the 15th IEEE Holm Conference on Electrical Contacts. IEEE; 2012.","mla":"Kiffe, Axel, et al. “Automated Generation of a FPGA-Based Oversampling Model of Power Electronic Circuits .” 2012 Proceedings of the 15th IEEE Holm Conference on Electrical Contacts, IEEE, 2012.","havard":"A. Kiffe, S. Geng, T. Schulte, Automated Generation of a FPGA-based Oversampling Model of Power Electronic Circuits , in: 2012 Proceedings of the 15th IEEE Holm Conference on Electrical Contacts, IEEE, 2012.","bjps":"Kiffe A, Geng S and Schulte T (2012) Automated Generation of a FPGA-Based Oversampling Model of Power Electronic Circuits . 2012 Proceedings of the 15th IEEE Holm Conference on Electrical Contacts. IEEE.","ufg":"Kiffe, Axel et. al. (2012): Automated Generation of a FPGA-based Oversampling Model of Power Electronic Circuits , in: 2012 Proceedings of the 15th IEEE Holm Conference on Electrical Contacts.","ieee":"A. Kiffe, S. Geng, and T. Schulte, “Automated Generation of a FPGA-based Oversampling Model of Power Electronic Circuits ,” in 2012 Proceedings of the 15th IEEE Holm Conference on Electrical Contacts, Novi Sad (Serbien), 2012.","ama":"Kiffe A, Geng S, Schulte T. Automated Generation of a FPGA-based Oversampling Model of Power Electronic Circuits . In: 2012 Proceedings of the 15th IEEE Holm Conference on Electrical Contacts. IEEE; 2012."},"title":"Automated Generation of a FPGA-based Oversampling Model of Power Electronic Circuits ","_id":"3975","language":[{"iso":"eng"}],"date_updated":"2023-03-15T13:49:49Z","user_id":"74004","date_created":"2020-11-19T13:39:46Z","type":"conference","publication":"2012 Proceedings of the 15th IEEE Holm Conference on Electrical Contacts"},{"type":"conference_abstract","date_created":"2020-11-23T11:26:01Z","date_updated":"2023-03-15T13:49:49Z","user_id":"74004","_id":"3997","language":[{"iso":"ger"}],"place":"Wiesbaden","title":"Herausforderung der HIL-Simulation für Hybrid- und Elektrofahrzeuge","citation":{"din1505-2-1":"Kiffe, Axel ; Geng, S. ; Schulte, Thomas: Herausforderung der HIL-Simulation für Hybrid- und Elektrofahrzeuge. In: . Wiesbaden : Springer Fachmedien GmbH, 2012","chicago-de":"Kiffe, Axel, S. Geng und Thomas Schulte. 2012. Herausforderung der HIL-Simulation für Hybrid- und Elektrofahrzeuge. In: . Wiesbaden: Springer Fachmedien GmbH.","short":"A. Kiffe, S. Geng, T. Schulte, in: Springer Fachmedien GmbH, Wiesbaden, 2012.","mla":"Kiffe, Axel, et al. Herausforderung der HIL-Simulation für Hybrid- und Elektrofahrzeuge. Springer Fachmedien GmbH, 2012.","bjps":"Kiffe A, Geng S and Schulte T (2012) Herausforderung der HIL-Simulation für Hybrid- und Elektrofahrzeuge. Wiesbaden: Springer Fachmedien GmbH.","havard":"A. Kiffe, S. Geng, T. Schulte, Herausforderung der HIL-Simulation für Hybrid- und Elektrofahrzeuge, in: Springer Fachmedien GmbH, Wiesbaden, 2012.","ufg":"Kiffe, Axel et. al. (2012): Herausforderung der HIL-Simulation für Hybrid- und Elektrofahrzeuge, in: , Wiesbaden.","van":"Kiffe A, Geng S, Schulte T. Herausforderung der HIL-Simulation für Hybrid- und Elektrofahrzeuge. In Wiesbaden: Springer Fachmedien GmbH; 2012.","chicago":"Kiffe, Axel, S. Geng, and Thomas Schulte. “Herausforderung der HIL-Simulation für Hybrid- und Elektrofahrzeuge.” Wiesbaden: Springer Fachmedien GmbH, 2012.","apa":"Kiffe, A., Geng, S., & Schulte, T. (2012). Herausforderung der HIL-Simulation für Hybrid- und Elektrofahrzeuge. Presented at the 4. Wissenschaftsforum Mobilität - \"Steps to Future Mobility“, Wiesbaden: Springer Fachmedien GmbH.","ama":"Kiffe A, Geng S, Schulte T. Herausforderung der HIL-Simulation für Hybrid- und Elektrofahrzeuge. In: Wiesbaden: Springer Fachmedien GmbH; 2012.","ieee":"A. Kiffe, S. Geng, and T. Schulte, “Herausforderung der HIL-Simulation für Hybrid- und Elektrofahrzeuge,” presented at the 4. Wissenschaftsforum Mobilität - \"Steps to Future Mobility“, Duisburg, 2012."},"department":[{"_id":"DEP6020"}],"conference":{"name":"4. Wissenschaftsforum Mobilität - \"Steps to Future Mobility“","location":"Duisburg","end_date":"2012-06-21","start_date":"2012-06-21"},"year":2012,"author":[{"last_name":"Kiffe","first_name":"Axel","full_name":"Kiffe, Axel","id":"59764"},{"first_name":"S.","full_name":"Geng, S.","last_name":"Geng"},{"full_name":"Schulte, Thomas","first_name":"Thomas","id":"46242","last_name":"Schulte"}],"publisher":"Springer Fachmedien GmbH","status":"public"},{"publication_status":"published","article_type":"original","publisher":"Faculty of Electrical Engineering, University of Banja Luka ","department":[{"_id":"DEP6020"}],"abstract":[{"lang":"eng","text":"Hardware-in-the-loop simulation is today a standard method for testing electronic equipment in the automotive industry. Since electric drives and power electronic devices are more and more important in automotive applications, these kinds of systems have to be integrated into the hardware- in-the-loop simulation. Power converters and electric drives are used in many different applications in vehicles today (hybrid electric or electric powertrain, electric steering systems, DC-DC converters, etc.). The wide range of applications, topologies, and power levels results in various different approaches and solutions for hardware-in-the-loop testing. This paper gives an overview of hardware-in-the-loop simulation of power electronics and electric drives in the automotive industry. The currently available technologies are described and future challenges are outlined."}],"issue":"2","user_id":"74004","intvolume":" 16","type":"journal_article","place":"Banja Luka ","_id":"4006","volume":16,"citation":{"van":"Schulte T, Kiffe A, Puschmann F. HIL Simulation of Power Electronics and Electric Drives for Automotive Applications. ELECTRONICS. 2012;16(2):130–5.","ama":"Schulte T, Kiffe A, Puschmann F. HIL Simulation of Power Electronics and Electric Drives for Automotive Applications. ELECTRONICS. 2012;16(2):130-135.","ufg":"Schulte, Thomas et. al. (2012): HIL Simulation of Power Electronics and Electric Drives for Automotive Applications, in: ELECTRONICS 16 (2), S. 130–135.","havard":"T. Schulte, A. Kiffe, F. Puschmann, HIL Simulation of Power Electronics and Electric Drives for Automotive Applications, ELECTRONICS. 16 (2012) 130–135.","bjps":"Schulte T, Kiffe A and Puschmann F (2012) HIL Simulation of Power Electronics and Electric Drives for Automotive Applications. ELECTRONICS 16, 130–135.","mla":"Schulte, Thomas, et al. “HIL Simulation of Power Electronics and Electric Drives for Automotive Applications.” ELECTRONICS, vol. 16, no. 2, Faculty of Electrical Engineering, University of Banja Luka , 2012, pp. 130–35.","apa":"Schulte, T., Kiffe, A., & Puschmann, F. (2012). HIL Simulation of Power Electronics and Electric Drives for Automotive Applications. ELECTRONICS, 16(2), 130–135.","ieee":"T. Schulte, A. Kiffe, and F. Puschmann, “HIL Simulation of Power Electronics and Electric Drives for Automotive Applications,” ELECTRONICS, vol. 16, no. 2, pp. 130–135, 2012.","chicago":"Schulte, Thomas, Axel Kiffe, and F. Puschmann. “HIL Simulation of Power Electronics and Electric Drives for Automotive Applications.” ELECTRONICS 16, no. 2 (2012): 130–35.","short":"T. Schulte, A. Kiffe, F. Puschmann, ELECTRONICS 16 (2012) 130–135.","chicago-de":"Schulte, Thomas, Axel Kiffe und F. Puschmann. 2012. HIL Simulation of Power Electronics and Electric Drives for Automotive Applications. ELECTRONICS 16, Nr. 2: 130–135.","din1505-2-1":"Schulte, Thomas ; Kiffe, Axel ; Puschmann, F.: HIL Simulation of Power Electronics and Electric Drives for Automotive Applications. In: ELECTRONICS Bd. 16. Banja Luka , Faculty of Electrical Engineering, University of Banja Luka (2012), Nr. 2, S. 130–135"},"title":"HIL Simulation of Power Electronics and Electric Drives for Automotive Applications","status":"public","page":"130 - 135","main_file_link":[{"url":"https://pdfs.semanticscholar.org/f783/42731381aa635b72b8bcaf60d504e066618e.pdf"}],"author":[{"last_name":"Schulte","first_name":"Thomas","full_name":"Schulte, Thomas","id":"46242"},{"last_name":"Kiffe","first_name":"Axel","id":"59764","full_name":"Kiffe, Axel"},{"last_name":"Puschmann","full_name":"Puschmann, F.","first_name":"F."}],"year":2012,"date_updated":"2023-03-15T13:49:49Z","publication":"ELECTRONICS","publication_identifier":{"issn":["1450-5843"]},"date_created":"2020-11-23T12:59:30Z","language":[{"iso":"eng"}]},{"language":[{"iso":"eng"}],"_id":"4007","date_created":"2020-11-23T13:06:13Z","type":"conference_abstract","date_updated":"2023-03-15T13:49:49Z","user_id":"74004","department":[{"_id":"DEP6020"}],"conference":{"end_date":"2012-11-22","start_date":"2012-11-20","location":"Brussels","name":"2 European Electric Vehicle Congress, EEVC 2012"},"author":[{"id":"43696","first_name":"Stefan","full_name":"Geng, Stefan","last_name":"Geng"},{"full_name":"Schulte, Thomas","first_name":"Thomas","id":"46242","last_name":"Schulte"}],"year":2012,"status":"public","title":"Hybrid Powertrain Transmission Models for HIL-Simulation","citation":{"van":"Geng S, Schulte T. Hybrid Powertrain Transmission Models for HIL-Simulation. In 2012.","ufg":"Geng, Stefan/Schulte, Thomas (2012): Hybrid Powertrain Transmission Models for HIL-Simulation, in: .","bjps":"Geng S and Schulte T (2012) Hybrid Powertrain Transmission Models for HIL-Simulation.","havard":"S. Geng, T. Schulte, Hybrid Powertrain Transmission Models for HIL-Simulation, in: 2012.","mla":"Geng, Stefan, and Thomas Schulte. Hybrid Powertrain Transmission Models for HIL-Simulation. 2012.","apa":"Geng, S., & Schulte, T. (2012). Hybrid Powertrain Transmission Models for HIL-Simulation. Presented at the 2 European Electric Vehicle Congress, EEVC 2012, Brussels.","chicago":"Geng, Stefan, and Thomas Schulte. “Hybrid Powertrain Transmission Models for HIL-Simulation,” 2012.","short":"S. Geng, T. Schulte, in: 2012.","chicago-de":"Geng, Stefan und Thomas Schulte. 2012. Hybrid Powertrain Transmission Models for HIL-Simulation. In: .","din1505-2-1":"Geng, Stefan ; Schulte, Thomas: Hybrid Powertrain Transmission Models for HIL-Simulation. In: , 2012","ama":"Geng S, Schulte T. Hybrid Powertrain Transmission Models for HIL-Simulation. In: ; 2012.","ieee":"S. Geng and T. Schulte, “Hybrid Powertrain Transmission Models for HIL-Simulation,” presented at the 2 European Electric Vehicle Congress, EEVC 2012, Brussels, 2012."}},{"publication_date":"2012-08-29","status":"public","application_date":"2002-05-17","department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"author":[{"last_name":"Borcherding","id":"1693","full_name":"Borcherding, Holger","first_name":"Holger"}],"year":2012,"citation":{"ufg":"Borcherding, Holger (2012): Schaltungsanordnung für einen Gleichspannungszwischenkreis.","bjps":"Borcherding H (2012) Schaltungsanordnung Für Einen Gleichspannungszwischenkreis.","havard":"H. Borcherding, Schaltungsanordnung für einen Gleichspannungszwischenkreis, (2012).","mla":"Borcherding, Holger. Schaltungsanordnung Für Einen Gleichspannungszwischenkreis. 2012.","van":"Borcherding H. Schaltungsanordnung für einen Gleichspannungszwischenkreis. 2012.","chicago":"Borcherding, Holger. “Schaltungsanordnung Für Einen Gleichspannungszwischenkreis,” 2012.","apa":"Borcherding, H. (2012). Schaltungsanordnung für einen Gleichspannungszwischenkreis.","din1505-2-1":"Borcherding, Holger: Schaltungsanordnung für einen Gleichspannungszwischenkreis (2012)","chicago-de":"Borcherding, Holger. 2012. Schaltungsanordnung für einen Gleichspannungszwischenkreis.","short":"H. Borcherding, (2012).","ama":"Borcherding H. Schaltungsanordnung für einen Gleichspannungszwischenkreis. 2012.","ieee":"H. Borcherding, “Schaltungsanordnung für einen Gleichspannungszwischenkreis.” 2012."},"application_number":"DE10221933","title":"Schaltungsanordnung für einen Gleichspannungszwischenkreis","_id":"4238","alternative_title":["Europäisches Patent, Erteilung "],"ipc":"H02M7/062","ipn":"EP1363387B1","date_updated":"2023-03-15T13:49:51Z","user_id":"74004","type":"patent","date_created":"2020-12-10T11:23:34Z"},{"year":2012,"main_file_link":[{"open_access":"1"}],"author":[{"full_name":"Röcker, Carsten","last_name":"Röcker","first_name":"Carsten","id":"61525"},{"full_name":"Kasugai, Kai","first_name":"Kai","last_name":"Kasugai"},{"last_name":"Plewe","first_name":"Daniela","full_name":"Plewe, Daniela"},{"last_name":"Kiriyama","full_name":"Kiriyama, Takashi","first_name":"Takashi"},{"full_name":"Lugmayr, Artur","last_name":"Lugmayr","first_name":"Artur"}],"page":"445-446","status":"public","extern":"1","title":"Aesthetic Intelligence: The Role of Design in Ambient Intelligence","citation":{"din1505-2-1":"Röcker, Carsten ; Kasugai, Kai ; Plewe, Daniela ; Kiriyama, Takashi ; Lugmayr, Artur: Aesthetic Intelligence: The Role of Design in Ambient Intelligence. In: Paternò, F. ; de Ruyter, B. ; Markopoulos, P. ; Santoro, C. (Hrsg.): Ambient Intelligence, Lecture Notes in Computer Science. Bd. 763. Berlin : Springer, 2012, S. 445–446","chicago-de":"Röcker, Carsten, Kai Kasugai, Daniela Plewe, Takashi Kiriyama und Artur Lugmayr. 2012. Aesthetic Intelligence: The Role of Design in Ambient Intelligence. In: Ambient Intelligence, hg. von Fabio Paternò, Boris de Ruyter, Panos Markopoulos, und Carmen Santoro, 763:445–446. Lecture Notes in Computer Science. Berlin: Springer. doi:10.1007/978-3-642-34898-3_41, .","short":"C. Röcker, K. Kasugai, D. Plewe, T. Kiriyama, A. Lugmayr, in: F. Paternò, B. de Ruyter, P. Markopoulos, C. Santoro (Eds.), Ambient Intelligence, Springer, Berlin, 2012, pp. 445–446.","ufg":"Röcker, Carsten et. al. (2012): Aesthetic Intelligence: The Role of Design in Ambient Intelligence, in: Fabio Paternò et. al. (Hgg.): Ambient Intelligence (=Lecture Notes in Computer Science 763), Berlin, S. 445–446.","havard":"C. Röcker, K. Kasugai, D. Plewe, T. Kiriyama, A. Lugmayr, Aesthetic Intelligence: The Role of Design in Ambient Intelligence, in: F. Paternò, B. de Ruyter, P. Markopoulos, C. Santoro (Eds.), Ambient Intelligence, Springer, Berlin, 2012: pp. 445–446.","bjps":"Röcker C et al. (2012) Aesthetic Intelligence: The Role of Design in Ambient Intelligence. In Paternò F et al. (eds), Ambient Intelligence, vol. 763. Berlin: Springer, pp. 445–446.","mla":"Röcker, Carsten, et al. “Aesthetic Intelligence: The Role of Design in Ambient Intelligence.” Ambient Intelligence, edited by Fabio Paternò et al., vol. 763, Springer, 2012, pp. 445–46, doi:10.1007/978-3-642-34898-3_41.","van":"Röcker C, Kasugai K, Plewe D, Kiriyama T, Lugmayr A. Aesthetic Intelligence: The Role of Design in Ambient Intelligence. In: Paternò F, de Ruyter B, Markopoulos P, Santoro C, editors. Ambient Intelligence. Berlin: Springer; 2012. p. 445–6. (Lecture Notes in Computer Science; vol. 763).","ama":"Röcker C, Kasugai K, Plewe D, Kiriyama T, Lugmayr A. Aesthetic Intelligence: The Role of Design in Ambient Intelligence. In: Paternò F, de Ruyter B, Markopoulos P, Santoro C, eds. Ambient Intelligence. Vol 763. Lecture Notes in Computer Science. Berlin: Springer; 2012:445-446. doi:10.1007/978-3-642-34898-3_41","chicago":"Röcker, Carsten, Kai Kasugai, Daniela Plewe, Takashi Kiriyama, and Artur Lugmayr. “Aesthetic Intelligence: The Role of Design in Ambient Intelligence.” In Ambient Intelligence, edited by Fabio Paternò, Boris de Ruyter, Panos Markopoulos, and Carmen Santoro, 763:445–46. Lecture Notes in Computer Science. Berlin: Springer, 2012. https://doi.org/10.1007/978-3-642-34898-3_41.","apa":"Röcker, C., Kasugai, K., Plewe, D., Kiriyama, T., & Lugmayr, A. (2012). Aesthetic Intelligence: The Role of Design in Ambient Intelligence. In F. Paternò, B. de Ruyter, P. Markopoulos, & C. Santoro (Eds.), Ambient Intelligence (Vol. 763, pp. 445–446). Berlin: Springer. https://doi.org/10.1007/978-3-642-34898-3_41","ieee":"C. Röcker, K. Kasugai, D. Plewe, T. Kiriyama, and A. Lugmayr, “Aesthetic Intelligence: The Role of Design in Ambient Intelligence,” in Ambient Intelligence, Pisa, Italy, 2012, vol. 763, pp. 445–446."},"volume":763,"oa":"1","language":[{"iso":"eng"}],"keyword":["Ambient Intelligence","Ubiquitous Computing","Smart Spaces","Aesthetics","Design","Architecture","Urban Informatics"],"date_created":"2021-01-15T14:01:09Z","publication":"Ambient Intelligence","publication_identifier":{"isbn":["978-3-642-34897-6"],"eisbn":["978-3-642-34898-3"]},"editor":[{"full_name":"Paternò, Fabio ","first_name":"Fabio ","last_name":"Paternò"},{"full_name":"de Ruyter, Boris ","first_name":"Boris ","last_name":"de Ruyter"},{"last_name":"Markopoulos","first_name":"Panos ","full_name":"Markopoulos, Panos "},{"first_name":"Carmen ","full_name":"Santoro, Carmen ","last_name":"Santoro"}],"date_updated":"2023-03-15T13:49:52Z","abstract":[{"lang":"eng","text":"This paper illustrates the rationale behind the second international workshop on Aesthetic Intelligence. The workshop addresses the multiple facets of aesthetics in the design process of Ambient Intelligence technologies, especially in the fields of architecture, industrial and interface design as well as human-computer interaction."}],"department":[{"_id":"DEP5023"}],"conference":{"start_date":"2012-11-13","end_date":"2012-11-15","location":"Pisa, Italy","name":"3rd International Joint Conference, AmI 2012"},"publisher":"Springer","series_title":"Lecture Notes in Computer Science","publication_status":"published","doi":"10.1007/978-3-642-34898-3_41","_id":"4385","place":"Berlin","type":"conference","intvolume":" 763","user_id":"15514"},{"publication_status":"published","publisher":"IEEE","abstract":[{"lang":"eng","text":"This paper illustrates the development of the roomXT system, a mixed reality communication system for the home domain. RoomXT virtually extends a user's physical environment by providing a “life-like” communication channel for informal and spontaneous interactions. We use a wall-sized display together with head-tracking and 3D rendering to achieve visual contiguity between the real and a virtual environment. As one possible application of this system, we set up a remote dining situation for two users. The dinner table is visually extended into the virtual environment in which a live video stream of the dining partner is shown. Great care was taken in regard to the aesthetic and device-free integration into the living room. First impressions of potential users support the validity of our design decisions."}],"department":[{"_id":"DEP5023"}],"conference":{"name":"6th International Conference on Pervasive Computing Technologies for Healthcare (PervasiveHealth) and Workshops","location":"San Diego, CA, USA ","start_date":"201205-21","end_date":"2012-05-24"},"user_id":"15514","type":"conference","doi":"10.4108/icst.pervasivehealth.2012.248679","_id":"4386","place":"Piscataway, NJ","citation":{"short":"F. Heidrich, K. Kasugai, C. Röcker, P. Russell, M. Ziefle, in: 6th International Conference on Pervasive Computing Technologies for Healthcare (PervasiveHealth), IEEE, Piscataway, NJ, 2012, pp. 211–214.","chicago-de":"Heidrich, Felix, Kai Kasugai, Carsten Röcker, Peter Russell und Martina Ziefle. 2012. roomXT: Advanced Video Communication for Joint Dining over a Distance. In: 6th International Conference on Pervasive Computing Technologies for Healthcare (PervasiveHealth), 211–214. Piscataway, NJ: IEEE. doi:10.4108/icst.pervasivehealth.2012.248679, .","din1505-2-1":"Heidrich, Felix ; Kasugai, Kai ; Röcker, Carsten ; Russell, Peter ; Ziefle, Martina: roomXT: Advanced Video Communication for Joint Dining over a Distance. In: 6th International Conference on Pervasive Computing Technologies for Healthcare (PervasiveHealth). Piscataway, NJ : IEEE, 2012, S. 211–214","apa":"Heidrich, F., Kasugai, K., Röcker, C., Russell, P., & Ziefle, M. (2012). roomXT: Advanced Video Communication for Joint Dining over a Distance. In 6th International Conference on Pervasive Computing Technologies for Healthcare (PervasiveHealth) (pp. 211–214). Piscataway, NJ: IEEE. https://doi.org/10.4108/icst.pervasivehealth.2012.248679","chicago":"Heidrich, Felix, Kai Kasugai, Carsten Röcker, Peter Russell, and Martina Ziefle. “RoomXT: Advanced Video Communication for Joint Dining over a Distance.” In 6th International Conference on Pervasive Computing Technologies for Healthcare (PervasiveHealth), 211–14. Piscataway, NJ: IEEE, 2012. https://doi.org/10.4108/icst.pervasivehealth.2012.248679.","van":"Heidrich F, Kasugai K, Röcker C, Russell P, Ziefle M. roomXT: Advanced Video Communication for Joint Dining over a Distance. In: 6th International Conference on Pervasive Computing Technologies for Healthcare (PervasiveHealth). Piscataway, NJ: IEEE; 2012. p. 211–4.","ufg":"Heidrich, Felix et. al. (2012): roomXT: Advanced Video Communication for Joint Dining over a Distance, in: 6th International Conference on Pervasive Computing Technologies for Healthcare (PervasiveHealth), Piscataway, NJ, S. 211–214.","bjps":"Heidrich F et al. (2012) RoomXT: Advanced Video Communication for Joint Dining over a Distance. 6th International Conference on Pervasive Computing Technologies for Healthcare (PervasiveHealth). Piscataway, NJ: IEEE, pp. 211–214.","mla":"Heidrich, Felix, et al. “RoomXT: Advanced Video Communication for Joint Dining over a Distance.” 6th International Conference on Pervasive Computing Technologies for Healthcare (PervasiveHealth), IEEE, 2012, pp. 211–14, doi:10.4108/icst.pervasivehealth.2012.248679.","havard":"F. Heidrich, K. Kasugai, C. Röcker, P. Russell, M. Ziefle, roomXT: Advanced Video Communication for Joint Dining over a Distance, in: 6th International Conference on Pervasive Computing Technologies for Healthcare (PervasiveHealth), IEEE, Piscataway, NJ, 2012: pp. 211–214.","ieee":"F. Heidrich, K. Kasugai, C. Röcker, P. Russell, and M. Ziefle, “roomXT: Advanced Video Communication for Joint Dining over a Distance,” in 6th International Conference on Pervasive Computing Technologies for Healthcare (PervasiveHealth), San Diego, CA, USA , 2012, pp. 211–214.","ama":"Heidrich F, Kasugai K, Röcker C, Russell P, Ziefle M. roomXT: Advanced Video Communication for Joint Dining over a Distance. In: 6th International Conference on Pervasive Computing Technologies for Healthcare (PervasiveHealth). Piscataway, NJ: IEEE; 2012:211-214. doi:10.4108/icst.pervasivehealth.2012.248679"},"extern":"1","title":"roomXT: Advanced Video Communication for Joint Dining over a Distance","page":"211 - 214","status":"public","author":[{"first_name":"Felix","full_name":"Heidrich, Felix","last_name":"Heidrich"},{"full_name":"Kasugai, Kai","first_name":"Kai","last_name":"Kasugai"},{"full_name":"Röcker, Carsten","id":"61525","last_name":"Röcker","first_name":"Carsten"},{"first_name":"Peter","last_name":"Russell","full_name":"Russell, Peter"},{"full_name":"Ziefle, Martina","first_name":"Martina","last_name":"Ziefle"}],"year":2012,"main_file_link":[{"open_access":"1"}],"date_updated":"2023-03-15T13:49:52Z","date_created":"2021-01-15T14:29:22Z","publication_identifier":{"unknown":["978-1-4673-1483-1"]},"publication":"6th International Conference on Pervasive Computing Technologies for Healthcare (PervasiveHealth)","language":[{"iso":"eng"}],"keyword":["pervasive health","ambient assisted living","video","communication","user-centered design"],"oa":"1"},{"page":"1-4","status":"public","author":[{"full_name":"Kasugai, Kai","last_name":"Kasugai","first_name":"Kai"},{"last_name":"Röcker","first_name":"Carsten","full_name":"Röcker, Carsten","id":"61525"},{"full_name":"Plewe, Daniela","last_name":"Plewe","first_name":"Daniela"},{"full_name":"Kiriyama, Takashi","last_name":"Kiriyama","first_name":"Takashi"},{"first_name":"Virpi","last_name":"Oksman","full_name":"Oksman, Virpi"}],"year":"2012","volume":277,"citation":{"apa":"Kasugai, K., Röcker, C., Plewe, D., Kiriyama, T., & Oksman, V. (2012). Aesthetic Intelligence – Concepts, Technologies and Applications. In R. Wichert, K. Van Laerhoven, & J. Gelissen (Eds.), Constructing Ambient Intelligence (Vol. 277, pp. 1–4). Springer. https://doi.org/10.1007/978-3-642-31479-7_1","chicago":"Kasugai, Kai, Carsten Röcker, Daniela Plewe, Takashi Kiriyama, and Virpi Oksman. “Aesthetic Intelligence – Concepts, Technologies and Applications.” In Constructing Ambient Intelligence, edited by Reiner Wichert, Kristof Van Laerhoven, and Jean Gelissen, 277:1–4. Communications in Computer and Information Science Series. Berlin: Springer, 2012. https://doi.org/10.1007/978-3-642-31479-7_1.","van":"Kasugai K, Röcker C, Plewe D, Kiriyama T, Oksman V. Aesthetic Intelligence – Concepts, Technologies and Applications. In: Wichert R, Van Laerhoven K, Gelissen J, editors. Constructing Ambient Intelligence. Berlin: Springer; 2012. p. 1–4. (Communications in Computer and Information Science Series; vol. 277).","bjps":"Kasugai K et al. (2012) Aesthetic Intelligence – Concepts, Technologies and Applications. In Wichert R, Van Laerhoven K and Gelissen J (eds), Constructing Ambient Intelligence, vol. 277. Berlin: Springer, pp. 1–4.","havard":"K. Kasugai, C. Röcker, D. Plewe, T. Kiriyama, V. Oksman, Aesthetic Intelligence – Concepts, Technologies and Applications, in: R. Wichert, K. Van Laerhoven, J. Gelissen (Eds.), Constructing Ambient Intelligence, Springer, Berlin, 2012: pp. 1–4.","mla":"Kasugai, Kai, et al. “Aesthetic Intelligence – Concepts, Technologies and Applications.” Constructing Ambient Intelligence, edited by Reiner Wichert et al., vol. 277, Springer, 2012, pp. 1–4, https://doi.org/10.1007/978-3-642-31479-7_1.","ufg":"Kasugai, Kai u. a.: Aesthetic Intelligence – Concepts, Technologies and Applications, in: Wichert, Reiner/Van Laerhoven, Kristof/Gelissen, Jean (Hgg.): Constructing Ambient Intelligence, Bd. 277, Berlin 2012 (Communications in Computer and Information Science Series), S. 1–4.","short":"K. Kasugai, C. Röcker, D. Plewe, T. Kiriyama, V. Oksman, in: R. Wichert, K. Van Laerhoven, J. Gelissen (Eds.), Constructing Ambient Intelligence, Springer, Berlin, 2012, pp. 1–4.","chicago-de":"Kasugai, Kai, Carsten Röcker, Daniela Plewe, Takashi Kiriyama und Virpi Oksman. 2012. Aesthetic Intelligence – Concepts, Technologies and Applications. In: Constructing Ambient Intelligence, hg. von Reiner Wichert, Kristof Van Laerhoven, und Jean Gelissen, 277:1–4. Communications in Computer and Information Science Series. Berlin: Springer. doi:10.1007/978-3-642-31479-7_1, .","din1505-2-1":"Kasugai, Kai ; Röcker, Carsten ; Plewe, Daniela ; Kiriyama, Takashi ; Oksman, Virpi: Aesthetic Intelligence – Concepts, Technologies and Applications. In: Wichert, R. ; Van Laerhoven, K. ; Gelissen, J. (Hrsg.): Constructing Ambient Intelligence, Communications in Computer and Information Science Series. Bd. 277. Berlin : Springer, 2012, S. 1–4","ieee":"K. Kasugai, C. Röcker, D. Plewe, T. Kiriyama, and V. Oksman, “Aesthetic Intelligence – Concepts, Technologies and Applications,” in Constructing Ambient Intelligence, vol. 277, R. Wichert, K. Van Laerhoven, and J. Gelissen, Eds. Berlin: Springer, 2012, pp. 1–4. doi: 10.1007/978-3-642-31479-7_1.","ama":"Kasugai K, Röcker C, Plewe D, Kiriyama T, Oksman V. Aesthetic Intelligence – Concepts, Technologies and Applications. In: Wichert R, Van Laerhoven K, Gelissen J, eds. Constructing Ambient Intelligence. Vol 277. Communications in Computer and Information Science Series. Springer; 2012:1-4. doi:10.1007/978-3-642-31479-7_1"},"extern":"1","title":"Aesthetic Intelligence – Concepts, Technologies and Applications","language":[{"iso":"eng"}],"keyword":["Ambient Intelligence","Aesthetics","Design","Architecture"],"editor":[{"last_name":"Wichert","first_name":"Reiner ","full_name":"Wichert, Reiner "},{"first_name":"Kristof ","full_name":"Van Laerhoven, Kristof ","last_name":"Van Laerhoven"},{"last_name":"Gelissen","first_name":"Jean ","full_name":"Gelissen, Jean "}],"date_updated":"2025-04-11T09:04:30Z","date_created":"2021-01-15T14:36:35Z","publication_identifier":{"eisbn":["978-3-642-31479-7"],"isbn":["978-3-642-31478-0"]},"publication":"Constructing Ambient Intelligence","publisher":"Springer","abstract":[{"lang":"eng","text":"This paper reports on the ideas and results of the First International Workshop on Aesthetic Intelligence (AxI’11) held as a satellite workshop during the International Joint Conference on Ambient Intelligence (AmI’11)."}],"conference":{"location":"Amsterdam, Netherlands","name":"AmI 2011 Workshops","start_date":"2011-11-16","end_date":"2011-11-18"},"department":[{"_id":"DEP5023"}],"publication_status":"published","series_title":"Communications in Computer and Information Science Series","doi":"10.1007/978-3-642-31479-7_1","_id":"4387","place":"Berlin","intvolume":" 277","user_id":"83781","type":"book_chapter"},{"editor":[{"last_name":"Wichert","full_name":"Wichert, Reiner","first_name":"Reiner"},{"full_name":"Van Laerhoven, Kristof","first_name":"Kristof","last_name":"Van Laerhoven"},{"last_name":"Gelissen","first_name":"Jean","full_name":"Gelissen, Jean"}],"date_updated":"2023-03-15T13:49:52Z","date_created":"2021-01-15T14:45:01Z","publication":"Constructing Ambient Intelligence ","publication_identifier":{"isbn":["978-3-642-31478-0"],"eisbn":["978-3-642-31479-7"]},"language":[{"iso":"eng"}],"keyword":["Ambient Intelligence","Large Domestic Screens","Smart Spaces","Aesthetics","Design","Architecture"],"oa":"1","volume":277,"citation":{"bjps":"Röcker C and Kasugai K (2012) Interactive Architecture in Domestic Spaces. In Wichert R, Van Laerhoven K and Gelissen J (eds), Constructing Ambient Intelligence , vol. 277. Berlin: Springer, pp. 12–18.","mla":"Röcker, Carsten, and Kai Kasugai. “Interactive Architecture in Domestic Spaces.” Constructing Ambient Intelligence , edited by Reiner Wichert et al., vol. 277, Springer, 2012, pp. 12–18, doi:10.1007/978-3-642-31479-7_3.","havard":"C. Röcker, K. Kasugai, Interactive Architecture in Domestic Spaces, in: R. Wichert, K. Van Laerhoven, J. Gelissen (Eds.), Constructing Ambient Intelligence , Springer, Berlin, 2012: pp. 12–18.","ufg":"Röcker, Carsten/Kasugai, Kai (2012): Interactive Architecture in Domestic Spaces, in: Reiner Wichert et. al. (Hgg.): Constructing Ambient Intelligence (=Communications in Computer and Information Science Volume 277), Berlin, S. 12–18.","van":"Röcker C, Kasugai K. Interactive Architecture in Domestic Spaces. In: Wichert R, Van Laerhoven K, Gelissen J, editors. Constructing Ambient Intelligence . Berlin: Springer; 2012. p. 12–8. (Communications in Computer and Information Science Volume ; vol. 277).","chicago":"Röcker, Carsten, and Kai Kasugai. “Interactive Architecture in Domestic Spaces.” In Constructing Ambient Intelligence , edited by Reiner Wichert, Kristof Van Laerhoven, and Jean Gelissen, 277:12–18. Communications in Computer and Information Science Volume . Berlin: Springer, 2012. https://doi.org/10.1007/978-3-642-31479-7_3.","apa":"Röcker, C., & Kasugai, K. (2012). Interactive Architecture in Domestic Spaces. In R. Wichert, K. Van Laerhoven, & J. Gelissen (Eds.), Constructing Ambient Intelligence (Vol. 277, pp. 12–18). Berlin: Springer. https://doi.org/10.1007/978-3-642-31479-7_3","chicago-de":"Röcker, Carsten und Kai Kasugai. 2012. Interactive Architecture in Domestic Spaces. In: Constructing Ambient Intelligence , hg. von Reiner Wichert, Kristof Van Laerhoven, und Jean Gelissen, 277:12–18. Communications in Computer and Information Science Volume . Berlin: Springer. doi:10.1007/978-3-642-31479-7_3, .","din1505-2-1":"Röcker, Carsten ; Kasugai, Kai: Interactive Architecture in Domestic Spaces. In: Wichert, R. ; Van Laerhoven, K. ; Gelissen, J. (Hrsg.): Constructing Ambient Intelligence , Communications in Computer and Information Science Volume . Bd. 277. Berlin : Springer, 2012, S. 12–18","short":"C. Röcker, K. Kasugai, in: R. Wichert, K. Van Laerhoven, J. Gelissen (Eds.), Constructing Ambient Intelligence , Springer, Berlin, 2012, pp. 12–18.","ama":"Röcker C, Kasugai K. Interactive Architecture in Domestic Spaces. In: Wichert R, Van Laerhoven K, Gelissen J, eds. Constructing Ambient Intelligence . Vol 277. Communications in Computer and Information Science Volume . Berlin: Springer; 2012:12-18. doi:10.1007/978-3-642-31479-7_3","ieee":"C. Röcker and K. Kasugai, “Interactive Architecture in Domestic Spaces,” in Constructing Ambient Intelligence , vol. 277, R. Wichert, K. Van Laerhoven, and J. Gelissen, Eds. Berlin: Springer, 2012, pp. 12–18."},"extern":"1","title":"Interactive Architecture in Domestic Spaces","page":"12-18","status":"public","author":[{"last_name":"Röcker","full_name":"Röcker, Carsten","first_name":"Carsten","id":"61525"},{"last_name":"Kasugai","first_name":"Kai","full_name":"Kasugai, Kai"}],"year":2012,"main_file_link":[{"open_access":"1"}],"intvolume":" 277","user_id":"15514","type":"book_chapter","doi":"10.1007/978-3-642-31479-7_3","_id":"4388","place":"Berlin","publication_status":"published","series_title":"Communications in Computer and Information Science Volume ","publisher":"Springer","abstract":[{"text":"Research in the field of smart home environments is still very much technology driven. While technical aspects like system reliability, performance or data security are undeniable important design factors, potential end users desire more than pure technical functionality favoring systems with high social and hedonic value. So far, the integration of digital information layers into the architectural environment and their consequences for human perception are still largely unexplored. In this paper we present three examples of interactive architecture for increased quality of life in domestic spaces: myGreenSpace, meetingMyEating and ubiGUI.","lang":"eng"}],"department":[{"_id":"DEP5023"}],"conference":{"end_date":"2011-11-18","start_date":"2011-11-16","location":"Amsterdam, Netherlands","name":"AmI 2011 Workshops"}},{"author":[{"full_name":"Meyer, Jochen","last_name":"Meyer","first_name":"Jochen"},{"last_name":"Boll","first_name":"Susanne","full_name":"Boll, Susanne"},{"last_name":"S. Lee","first_name":"Young","full_name":"S. Lee, Young"},{"first_name":"Oscar","full_name":"Mayora, Oscar","last_name":"Mayora"},{"first_name":"Katie","full_name":"Siek, Katie","last_name":"Siek"},{"last_name":"Röcker","full_name":"Röcker, Carsten","id":"61525","first_name":"Carsten"}],"main_file_link":[{"open_access":"1"}],"year":2012,"status":"public","page":"51 - 55","title":"Wellness interventions and HCI: theory, practice, and technology","extern":"1","volume":2,"citation":{"short":"J. Meyer, S. Boll, Y. S. Lee, O. Mayora, K. Siek, C. Röcker, ACM SIGHIT Record 2 (2012) 51–55.","chicago-de":"Meyer, Jochen, Susanne Boll, Young S. Lee, Oscar Mayora, Katie Siek und Carsten Röcker. 2012. Wellness interventions and HCI: theory, practice, and technology. ACM SIGHIT Record 2, Nr. 2: 51–55. doi:10.1145/2384556.2384564, .","din1505-2-1":"Meyer, Jochen ; Boll, Susanne ; S. Lee, Young ; Mayora, Oscar ; Siek, Katie ; Röcker, Carsten: Wellness interventions and HCI: theory, practice, and technology. In: ACM SIGHIT Record Bd. 2. New York, ACM (2012), Nr. 2, S. 51–55","apa":"Meyer, J., Boll, S., S. Lee, Y., Mayora, O., Siek, K., & Röcker, C. (2012). Wellness interventions and HCI: theory, practice, and technology. ACM SIGHIT Record, 2(2), 51–55. https://doi.org/10.1145/2384556.2384564","chicago":"Meyer, Jochen, Susanne Boll, Young S. Lee, Oscar Mayora, Katie Siek, and Carsten Röcker. “Wellness Interventions and HCI: Theory, Practice, and Technology.” ACM SIGHIT Record 2, no. 2 (2012): 51–55. https://doi.org/10.1145/2384556.2384564.","van":"Meyer J, Boll S, S. Lee Y, Mayora O, Siek K, Röcker C. Wellness interventions and HCI: theory, practice, and technology. ACM SIGHIT Record. 2012;2(2):51–5.","ufg":"Meyer, Jochen et. al. (2012): Wellness interventions and HCI: theory, practice, and technology, in: ACM SIGHIT Record 2 (2), S. 51–55.","mla":"Meyer, Jochen, et al. “Wellness Interventions and HCI: Theory, Practice, and Technology.” ACM SIGHIT Record, vol. 2, no. 2, ACM, 2012, pp. 51–55, doi:10.1145/2384556.2384564.","havard":"J. Meyer, S. Boll, Y. S. Lee, O. Mayora, K. Siek, C. Röcker, Wellness interventions and HCI: theory, practice, and technology, ACM SIGHIT Record. 2 (2012) 51–55.","bjps":"Meyer J et al. (2012) Wellness Interventions and HCI: Theory, Practice, and Technology. ACM SIGHIT Record 2, 51–55.","ieee":"J. Meyer, S. Boll, Y. S. Lee, O. Mayora, K. Siek, and C. Röcker, “Wellness interventions and HCI: theory, practice, and technology,” ACM SIGHIT Record, vol. 2, no. 2, pp. 51–55, 2012.","ama":"Meyer J, Boll S, S. Lee Y, Mayora O, Siek K, Röcker C. Wellness interventions and HCI: theory, practice, and technology. ACM SIGHIT Record. 2012;2(2):51-55. doi:10.1145/2384556.2384564"},"oa":"1","keyword":["Wellness","interventions","applications","health promotion","preventive care","informatics"],"language":[{"iso":"eng"}],"publication":"ACM SIGHIT Record","publication_identifier":{"issn":["2158-8813"]},"date_created":"2021-01-15T14:55:47Z","date_updated":"2023-03-15T13:49:52Z","department":[{"_id":"DEP5023"}],"abstract":[{"lang":"eng","text":"In recent years, we have seen an explosion of wellness interventions and technology applications focused on human's wellness with the intention of helping people avoid needing medical care. Given the increasing emergence of wellness applications, there is a need to integrate existing diverse research endeavors and discuss key challenges and opportunities for next generation wellness interventions and applications. We therefore conducted a workshop that brought together researchers and practitioners in the wellness field to develop a shared understanding of existing approaches and findings around the wellness interventions and applications and identify key synergies, opportunities, and challenges for future research that lead to successful wellbeing."}],"issue":"2","publisher":"ACM","publication_status":"published","place":"New York","_id":"4390","doi":"10.1145/2384556.2384564","type":"journal_article","user_id":"15514","intvolume":" 2"},{"title":"Smart Medical Services: A Discussion of State-of-The-Art Approaches","extern":"1","volume":2,"citation":{"short":"C. Röcker, International Journal of Machine Learning and Computing : IJMLC 2 (2012) 226–230.","din1505-2-1":"Röcker, Carsten: Smart Medical Services: A Discussion of State-of-The-Art Approaches. In: International Journal of Machine Learning and Computing : IJMLC Bd. 2 (2012), Nr. 3, S. 226–230","chicago-de":"Röcker, Carsten. 2012. Smart Medical Services: A Discussion of State-of-The-Art Approaches. International Journal of Machine Learning and Computing : IJMLC 2, Nr. 3: 226–230. doi:10.7763/IJMLC.2012.V2.119 , .","ama":"Röcker C. Smart Medical Services: A Discussion of State-of-The-Art Approaches. International Journal of Machine Learning and Computing : IJMLC. 2012;2(3):226-230. doi:10.7763/IJMLC.2012.V2.119 ","van":"Röcker C. Smart Medical Services: A Discussion of State-of-The-Art Approaches. International Journal of Machine Learning and Computing : IJMLC. 2012;2(3):226–30.","havard":"C. Röcker, Smart Medical Services: A Discussion of State-of-The-Art Approaches, International Journal of Machine Learning and Computing : IJMLC. 2 (2012) 226–230.","bjps":"Röcker C (2012) Smart Medical Services: A Discussion of State-of-The-Art Approaches. International Journal of Machine Learning and Computing : IJMLC 2, 226–230.","mla":"Röcker, Carsten. “Smart Medical Services: A Discussion of State-of-The-Art Approaches.” International Journal of Machine Learning and Computing : IJMLC, vol. 2, no. 3, 2012, pp. 226–30, doi:10.7763/IJMLC.2012.V2.119 .","ufg":"Röcker, Carsten (2012): Smart Medical Services: A Discussion of State-of-The-Art Approaches, in: International Journal of Machine Learning and Computing : IJMLC 2 (3), S. 226–230.","ieee":"C. Röcker, “Smart Medical Services: A Discussion of State-of-The-Art Approaches,” International Journal of Machine Learning and Computing : IJMLC, vol. 2, no. 3, pp. 226–230, 2012.","apa":"Röcker, C. (2012). Smart Medical Services: A Discussion of State-of-The-Art Approaches. International Journal of Machine Learning and Computing : IJMLC, 2(3), 226–230. https://doi.org/10.7763/IJMLC.2012.V2.119 ","chicago":"Röcker, Carsten. “Smart Medical Services: A Discussion of State-of-The-Art Approaches.” International Journal of Machine Learning and Computing : IJMLC 2, no. 3 (2012): 226–30. https://doi.org/10.7763/IJMLC.2012.V2.119 ."},"author":[{"first_name":"Carsten","full_name":"Röcker, Carsten","id":"61525","last_name":"Röcker"}],"year":2012,"main_file_link":[{"open_access":"1"}],"status":"public","page":"226 - 230","publication":"International Journal of Machine Learning and Computing : IJMLC","publication_identifier":{"issn":["2010-3700"]},"date_created":"2021-01-15T15:00:30Z","date_updated":"2023-03-15T13:49:52Z","oa":"1","keyword":["Smart medical services","ambient assisted living","E-healt","intelligent environments","ubiquitous and pervasive computing."],"language":[{"iso":"eng"}],"publication_status":"published","department":[{"_id":"DEP5023"}],"issue":"3","abstract":[{"lang":"eng","text":"This paper presents a discussion of current developments in the field of smart medical services. Smart medical services are often cited as a promising solution to support elderly or disabled people. By providing a wide variety of services, they bear an immense potential for revolutionizing the way health services are provided in the future. In general, smart medical services can be clustered into three categories focusing on the detection and prevention of emergency situations, long-term treatment of chronic diseases, and the prevention and early-detection of illnesses. This paper provides an overview over the different types of applications and describes several research demonstrators and prototype systems for each category."}],"type":"journal_article","user_id":"15514","intvolume":" 2","_id":"4391","doi":"10.7763/IJMLC.2012.V2.119 "},{"department":[{"_id":"DEP5023"}],"conference":{"location":"Copenhagen, Denmark","name":"7th Nordic Conference on Human-Computer Interaction ; NordiCHI '12 ","start_date":"2012-10-14","end_date":"201210-17"},"year":2012,"author":[{"last_name":"Meyer","full_name":"Meyer, Jochen","first_name":"Jochen"},{"last_name":"Boll","first_name":"Susanne","full_name":"Boll, Susanne"},{"last_name":"S. Lee","first_name":"Young","full_name":"S. Lee, Young"},{"full_name":"Mayora, Oscar","last_name":"Mayora","first_name":"Oscar"},{"last_name":"Siek","first_name":"Katie","full_name":"Siek, Katie"},{"id":"61525","full_name":"Röcker, Carsten","first_name":"Carsten","last_name":"Röcker"}],"main_file_link":[{"url":"https://www.researchgate.net/profile/Carsten_Roecker/publication/265375808_Technologies_for_Well-Being_Opportunities_and_Challenges_for_HCI/links/5409d7fe0cf2f2b29a2cc676/Technologies-for-Well-Being-Opportunities-and-Challenges-for-HCI.pdf","open_access":"1"}],"status":"public","publisher":"ACM","extern":"1","title":"Technologies for Well-Being: Opportunities and Challenges for HCI","publication_status":"published","citation":{"ieee":"J. Meyer, S. Boll, Y. S. Lee, O. Mayora, K. Siek, and C. Röcker, “Technologies for Well-Being: Opportunities and Challenges for HCI,” in NordiCHI ’12 : proceedings of the 7th Nordic Conference on Human-Computer Interaction: Making Sense Through Design; Copenhagen, Denmark, 14 - 27 October 2012, Copenhagen, Denmark, 2012.","ama":"Meyer J, Boll S, S. Lee Y, Mayora O, Siek K, Röcker C. Technologies for Well-Being: Opportunities and Challenges for HCI. In: NordiCHI ’12 : Proceedings of the 7th Nordic Conference on Human-Computer Interaction: Making Sense Through Design; Copenhagen, Denmark, 14 - 27 October 2012. New York: ACM; 2012.","chicago":"Meyer, Jochen, Susanne Boll, Young S. Lee, Oscar Mayora, Katie Siek, and Carsten Röcker. “Technologies for Well-Being: Opportunities and Challenges for HCI.” In NordiCHI ’12 : Proceedings of the 7th Nordic Conference on Human-Computer Interaction: Making Sense Through Design; Copenhagen, Denmark, 14 - 27 October 2012. New York: ACM, 2012.","apa":"Meyer, J., Boll, S., S. Lee, Y., Mayora, O., Siek, K., & Röcker, C. (2012). Technologies for Well-Being: Opportunities and Challenges for HCI. In NordiCHI ’12 : proceedings of the 7th Nordic Conference on Human-Computer Interaction: Making Sense Through Design; Copenhagen, Denmark, 14 - 27 October 2012. New York: ACM.","mla":"Meyer, Jochen, et al. “Technologies for Well-Being: Opportunities and Challenges for HCI.” NordiCHI ’12 : Proceedings of the 7th Nordic Conference on Human-Computer Interaction: Making Sense Through Design; Copenhagen, Denmark, 14 - 27 October 2012, ACM, 2012.","havard":"J. Meyer, S. Boll, Y. S. Lee, O. Mayora, K. Siek, C. Röcker, Technologies for Well-Being: Opportunities and Challenges for HCI, in: NordiCHI ’12 : Proceedings of the 7th Nordic Conference on Human-Computer Interaction: Making Sense Through Design; Copenhagen, Denmark, 14 - 27 October 2012, ACM, New York, 2012.","bjps":"Meyer J et al. (2012) Technologies for Well-Being: Opportunities and Challenges for HCI. NordiCHI ’12 : Proceedings of the 7th Nordic Conference on Human-Computer Interaction: Making Sense Through Design; Copenhagen, Denmark, 14 - 27 October 2012. New York: ACM.","ufg":"Meyer, Jochen et. al. (2012): Technologies for Well-Being: Opportunities and Challenges for HCI, in: NordiCHI ’12 : proceedings of the 7th Nordic Conference on Human-Computer Interaction: Making Sense Through Design; Copenhagen, Denmark, 14 - 27 October 2012, New York.","van":"Meyer J, Boll S, S. Lee Y, Mayora O, Siek K, Röcker C. Technologies for Well-Being: Opportunities and Challenges for HCI. In: NordiCHI ’12 : proceedings of the 7th Nordic Conference on Human-Computer Interaction: Making Sense Through Design; Copenhagen, Denmark, 14 - 27 October 2012. New York: ACM; 2012.","din1505-2-1":"Meyer, Jochen ; Boll, Susanne ; S. Lee, Young ; Mayora, Oscar ; Siek, Katie ; Röcker, Carsten: Technologies for Well-Being: Opportunities and Challenges for HCI. In: NordiCHI ’12 : proceedings of the 7th Nordic Conference on Human-Computer Interaction: Making Sense Through Design; Copenhagen, Denmark, 14 - 27 October 2012. New York : ACM, 2012","chicago-de":"Meyer, Jochen, Susanne Boll, Young S. Lee, Oscar Mayora, Katie Siek und Carsten Röcker. 2012. Technologies for Well-Being: Opportunities and Challenges for HCI. In: NordiCHI ’12 : proceedings of the 7th Nordic Conference on Human-Computer Interaction: Making Sense Through Design; Copenhagen, Denmark, 14 - 27 October 2012. New York: ACM.","short":"J. Meyer, S. Boll, Y. S. Lee, O. Mayora, K. Siek, C. Röcker, in: NordiCHI ’12 : Proceedings of the 7th Nordic Conference on Human-Computer Interaction: Making Sense Through Design; Copenhagen, Denmark, 14 - 27 October 2012, ACM, New York, 2012."},"oa":"1","language":[{"iso":"eng"}],"place":"New York","_id":"4392","date_created":"2021-01-15T15:03:55Z","type":"conference","publication_identifier":{"isbn":["978-1-4503-1482-4"]},"publication":"NordiCHI '12 : proceedings of the 7th Nordic Conference on Human-Computer Interaction: Making Sense Through Design; Copenhagen, Denmark, 14 - 27 October 2012","date_updated":"2023-03-15T13:49:52Z","user_id":"15514"},{"_id":"4393","user_id":"15514","type":"conference","abstract":[{"text":"Research in the field of technology-supported personal care gained considerable momentum over the last 10 to 15 years. This paper provides a comprehensive overview over state-of-the-art research activities in this field by illustrating major projects and research initiatives as well as highlighting successful approaches to Ambient Assisted Living.","lang":"eng"}],"issue":"14","department":[{"_id":"DEP5023"}],"conference":{"location":"Hong Kong","name":"International Conference on Future Information Technology and Management Science & Engineering","start_date":"2012-04-12","end_date":"2012-04-13"},"publication_status":"published","series_title":"Lectute notes in information technology : (LNIT)","keyword":["Smart medical services","ambient assisted living","E-healt","intelligent environments","ubiquitous and pervasive computing"],"language":[{"iso":"eng"}],"oa":"1","date_updated":"2023-03-15T13:49:52Z","publication":"2012 International Conference on Future Information Technology and Management Science & Engineering ; Lectute notes in information technology : (LNIT)","date_created":"2021-01-15T15:19:28Z","status":"public","page":"6 - 14","main_file_link":[{"url":"https://www.researchgate.net/profile/Carsten_Roecker/publication/265375779_Current_Approaches_to_Ambient_Assisted_Living/links/5409d6180cf2f2b29a2cc5fc/Current-Approaches-to-Ambient-Assisted-Living.pdf","open_access":"1"}],"year":2012,"author":[{"id":"61525","first_name":"Carsten","last_name":"Röcker","full_name":"Röcker, Carsten"},{"full_name":"Ziefle, Martina","first_name":"Martina","last_name":"Ziefle"}],"citation":{"ufg":"Röcker, Carsten/Ziefle, Martina (2012): Current Approaches to Ambient Assisted Living, in: 2012 International Conference on Future Information Technology and Management Science & Engineering ; Lectute notes in information technology : (LNIT) (=Lectute notes in information technology : (LNIT)), S. 6–14.","havard":"C. Röcker, M. Ziefle, Current Approaches to Ambient Assisted Living, in: 2012 International Conference on Future Information Technology and Management Science & Engineering ; Lectute Notes in Information Technology : (LNIT), 2012: pp. 6–14.","mla":"Röcker, Carsten, and Martina Ziefle. “Current Approaches to Ambient Assisted Living.” 2012 International Conference on Future Information Technology and Management Science & Engineering ; Lectute Notes in Information Technology : (LNIT), no. 14, 2012, pp. 6–14.","bjps":"Röcker C and Ziefle M (2012) Current Approaches to Ambient Assisted Living. 2012 International Conference on Future Information Technology and Management Science & Engineering ; Lectute Notes in Information Technology : (LNIT). pp. 6–14.","van":"Röcker C, Ziefle M. Current Approaches to Ambient Assisted Living. In: 2012 International Conference on Future Information Technology and Management Science & Engineering ; Lectute notes in information technology : (LNIT). 2012. p. 6–14. (Lectute notes in information technology : (LNIT)).","chicago":"Röcker, Carsten, and Martina Ziefle. “Current Approaches to Ambient Assisted Living.” In 2012 International Conference on Future Information Technology and Management Science & Engineering ; Lectute Notes in Information Technology : (LNIT), 6–14. Lectute Notes in Information Technology : (LNIT), 2012.","apa":"Röcker, C., & Ziefle, M. (2012). Current Approaches to Ambient Assisted Living. In 2012 International Conference on Future Information Technology and Management Science & Engineering ; Lectute notes in information technology : (LNIT) (pp. 6–14). Hong Kong.","chicago-de":"Röcker, Carsten und Martina Ziefle. 2012. Current Approaches to Ambient Assisted Living. In: 2012 International Conference on Future Information Technology and Management Science & Engineering ; Lectute notes in information technology : (LNIT), 6–14. Lectute notes in information technology : (LNIT).","din1505-2-1":"Röcker, Carsten ; Ziefle, Martina: Current Approaches to Ambient Assisted Living. In: 2012 International Conference on Future Information Technology and Management Science & Engineering ; Lectute notes in information technology : (LNIT), Lectute notes in information technology : (LNIT), 2012, S. 6–14","short":"C. Röcker, M. Ziefle, in: 2012 International Conference on Future Information Technology and Management Science & Engineering ; Lectute Notes in Information Technology : (LNIT), 2012, pp. 6–14.","ama":"Röcker C, Ziefle M. Current Approaches to Ambient Assisted Living. In: 2012 International Conference on Future Information Technology and Management Science & Engineering ; Lectute Notes in Information Technology : (LNIT). Lectute notes in information technology : (LNIT). ; 2012:6-14.","ieee":"C. Röcker and M. Ziefle, “Current Approaches to Ambient Assisted Living,” in 2012 International Conference on Future Information Technology and Management Science & Engineering ; Lectute notes in information technology : (LNIT), Hong Kong, 2012, no. 14, pp. 6–14."},"title":"Current Approaches to Ambient Assisted Living","extern":"1"},{"publication_status":"published","abstract":[{"text":"This paper presents the evaluation of a mixed reality communication system for the home domain, called roomXT. The system uses a wall-sized display that is seamlessly integrated into a living lab, to create a 'life-like' video communication experience. In order to demonstrate the potential of this approach, we conducted a living lab study comparing the developed prototype with a desktop-based system. A special video communication application, which enables spatially separated users to have a joint dinner experience, served as a common basis for the different test conditions. Results of the study show that the overall concept of roomXT was well eceived by users of a wide age range and that the developed prototype system seems to be preferred to commercially available video communication solutions with respect to the tested quality dimensions.","lang":"eng"}],"conference":{"name":"PerDis 2012: The International Symposium on Pervasive Displays","location":"Porto, Portugal ","end_date":"2012-06","start_date":"2012-06"},"department":[{"_id":"DEP5023"}],"publisher":"ACM","type":"conference","user_id":"15514","_id":"4395","doi":"10.1145/2307798.2307811","place":"New York","title":"Perspective Views in Video Communication Systems: An Analysis of Fundamental User Requirements","extern":"1","citation":{"apa":"Kasugai, K., Heidrich, F., Röcker, C., Russell, P., & Ziefle, M. (2012). Perspective Views in Video Communication Systems: An Analysis of Fundamental User Requirements. In R. José (Ed.), Proceedings of the 2012 International Symposium on Pervasive Displays (pp. 1–6). New York: ACM. https://doi.org/10.1145/2307798.2307811","chicago":"Kasugai, Kai, Felix Heidrich, Carsten Röcker, Peter Russell, and Martina Ziefle. “Perspective Views in Video Communication Systems: An Analysis of Fundamental User Requirements.” In Proceedings of the 2012 International Symposium on Pervasive Displays, edited by Rui José, 1–6. New York: ACM, 2012. https://doi.org/10.1145/2307798.2307811.","van":"Kasugai K, Heidrich F, Röcker C, Russell P, Ziefle M. Perspective Views in Video Communication Systems: An Analysis of Fundamental User Requirements. In: José R, editor. Proceedings of the 2012 International Symposium on Pervasive Displays. New York: ACM; 2012. p. 1–6.","ufg":"Kasugai, Kai et. al. (2012): Perspective Views in Video Communication Systems: An Analysis of Fundamental User Requirements, in: Rui José (Hg.): Proceedings of the 2012 International Symposium on Pervasive Displays, New York, S. 1–6.","bjps":"Kasugai K et al. (2012) Perspective Views in Video Communication Systems: An Analysis of Fundamental User Requirements. In José R (ed.), Proceedings of the 2012 International Symposium on Pervasive Displays. New York: ACM, pp. 1–6.","mla":"Kasugai, Kai, et al. “Perspective Views in Video Communication Systems: An Analysis of Fundamental User Requirements.” Proceedings of the 2012 International Symposium on Pervasive Displays, edited by Rui José, ACM, 2012, pp. 1–6, doi:10.1145/2307798.2307811.","havard":"K. Kasugai, F. Heidrich, C. Röcker, P. Russell, M. Ziefle, Perspective Views in Video Communication Systems: An Analysis of Fundamental User Requirements, in: R. José (Ed.), Proceedings of the 2012 International Symposium on Pervasive Displays, ACM, New York, 2012: pp. 1–6.","short":"K. Kasugai, F. Heidrich, C. Röcker, P. Russell, M. Ziefle, in: R. José (Ed.), Proceedings of the 2012 International Symposium on Pervasive Displays, ACM, New York, 2012, pp. 1–6.","din1505-2-1":"Kasugai, Kai ; Heidrich, Felix ; Röcker, Carsten ; Russell, Peter ; Ziefle, Martina: Perspective Views in Video Communication Systems: An Analysis of Fundamental User Requirements. In: José, R. (Hrsg.): Proceedings of the 2012 International Symposium on Pervasive Displays. New York : ACM, 2012, S. 1–6","chicago-de":"Kasugai, Kai, Felix Heidrich, Carsten Röcker, Peter Russell und Martina Ziefle. 2012. Perspective Views in Video Communication Systems: An Analysis of Fundamental User Requirements. In: Proceedings of the 2012 International Symposium on Pervasive Displays, hg. von Rui José, 1–6. New York: ACM. doi:10.1145/2307798.2307811, .","ieee":"K. Kasugai, F. Heidrich, C. Röcker, P. Russell, and M. Ziefle, “Perspective Views in Video Communication Systems: An Analysis of Fundamental User Requirements,” in Proceedings of the 2012 International Symposium on Pervasive Displays, Porto, Portugal , 2012, pp. 1–6.","ama":"Kasugai K, Heidrich F, Röcker C, Russell P, Ziefle M. Perspective Views in Video Communication Systems: An Analysis of Fundamental User Requirements. In: José R, ed. Proceedings of the 2012 International Symposium on Pervasive Displays. New York: ACM; 2012:1-6. doi:10.1145/2307798.2307811"},"main_file_link":[{"open_access":"1"}],"year":2012,"author":[{"full_name":"Kasugai, Kai","first_name":"Kai","last_name":"Kasugai"},{"last_name":"Heidrich","first_name":"Felix","full_name":"Heidrich, Felix"},{"last_name":"Röcker","first_name":"Carsten","full_name":"Röcker, Carsten","id":"61525"},{"first_name":"Peter","full_name":"Russell, Peter","last_name":"Russell"},{"first_name":"Martina","last_name":"Ziefle","full_name":"Ziefle, Martina"}],"status":"public","page":"1-6","publication":"Proceedings of the 2012 International Symposium on Pervasive Displays","publication_identifier":{"isbn":["978-145-031-414-5 "]},"date_created":"2021-01-15T15:20:55Z","editor":[{"first_name":"Rui","last_name":"José","full_name":"José, Rui"}],"date_updated":"2023-03-15T13:49:52Z","oa":"1","keyword":["human-computer interaction","mixed-reality","large displays","co-dining","interactive media","family communication","co-presence","architecture"],"language":[{"iso":"eng"}]},{"title":"Universal access to awareness information: using smart artefacts to mediate awareness in distributed teams","extern":"1","volume":11,"citation":{"ieee":"C. Röcker, “Universal access to awareness information: using smart artefacts to mediate awareness in distributed teams,” Universal access in the information society : international journal, vol. 11, no. 3, pp. 259–271, 2012.","ama":"Röcker C. Universal access to awareness information: using smart artefacts to mediate awareness in distributed teams. Universal access in the information society : international journal. 2012;11(3):259-271. doi:10.1007/s10209-011-0237-9","apa":"Röcker, C. (2012). Universal access to awareness information: using smart artefacts to mediate awareness in distributed teams. Universal Access in the Information Society : International Journal, 11(3), 259–271. https://doi.org/10.1007/s10209-011-0237-9","chicago":"Röcker, Carsten. “Universal Access to Awareness Information: Using Smart Artefacts to Mediate Awareness in Distributed Teams.” Universal Access in the Information Society : International Journal 11, no. 3 (2012): 259–71. https://doi.org/10.1007/s10209-011-0237-9.","van":"Röcker C. Universal access to awareness information: using smart artefacts to mediate awareness in distributed teams. Universal access in the information society : international journal. 2012;11(3):259–71.","mla":"Röcker, Carsten. “Universal Access to Awareness Information: Using Smart Artefacts to Mediate Awareness in Distributed Teams.” Universal Access in the Information Society : International Journal, vol. 11, no. 3, 2012, pp. 259–71, doi:10.1007/s10209-011-0237-9.","havard":"C. Röcker, Universal access to awareness information: using smart artefacts to mediate awareness in distributed teams, Universal Access in the Information Society : International Journal. 11 (2012) 259–271.","bjps":"Röcker C (2012) Universal Access to Awareness Information: Using Smart Artefacts to Mediate Awareness in Distributed Teams. Universal access in the information society : international journal 11, 259–271.","ufg":"Röcker, Carsten (2012): Universal access to awareness information: using smart artefacts to mediate awareness in distributed teams, in: Universal access in the information society : international journal 11 (3), S. 259–271.","short":"C. Röcker, Universal Access in the Information Society : International Journal 11 (2012) 259–271.","chicago-de":"Röcker, Carsten. 2012. Universal access to awareness information: using smart artefacts to mediate awareness in distributed teams. Universal access in the information society : international journal 11, Nr. 3: 259–271. doi:10.1007/s10209-011-0237-9, .","din1505-2-1":"Röcker, Carsten: Universal access to awareness information: using smart artefacts to mediate awareness in distributed teams. In: Universal access in the information society : international journal Bd. 11 (2012), Nr. 3, S. 259–271"},"year":2012,"author":[{"last_name":"Röcker","id":"61525","first_name":"Carsten","full_name":"Röcker, Carsten"}],"main_file_link":[{"open_access":"1"}],"status":"public","page":"259 - 271","publication_identifier":{"eissn":["1615-5289"]},"publication":"Universal access in the information society : international journal","date_created":"2021-01-15T15:21:19Z","date_updated":"2023-03-15T13:49:52Z","oa":"1","keyword":["Ambient intelligence","Ubiquitous computin","Awareness","Informal communication","Distributed teamwork"],"language":[{"iso":"eng"}],"publication_status":"published","issue":"3","abstract":[{"text":"This paper presents a set of design recommendations for team awareness systems based on fundamental social and technical requirements. The work was motivated by recurring usability problems identified in evaluations of state-of-the-art awareness systems. Based on these findings, it is argued that the limited success of existing systems is mostly caused by conceptual shortcomings, which can be overcome by adhering to a set of design recommendations elaborated in this paper. To demonstrate the validity of this argumentation, the development and evaluation of an ambient awareness system is illustrated.","lang":"eng"}],"department":[{"_id":"DEP5023"}],"type":"journal_article","intvolume":" 11","user_id":"15514","_id":"4396","doi":"10.1007/s10209-011-0237-9"},{"date_updated":"2023-03-15T13:49:53Z","user_id":"45673","type":"conference","date_created":"2021-01-26T12:48:35Z","_id":"4526","language":[{"iso":"eng"}],"citation":{"ama":"Imtiaz J, Jasperneite J. Performance impacts of different models. In: ; 2012.","ieee":"J. Imtiaz and J. Jasperneite, “Performance impacts of different models,” presented at the IEEE 802.1 AVB Task Group Real Time communication Symposium, Munich, Germany, 2012.","short":"J. Imtiaz, J. Jasperneite, in: 2012.","din1505-2-1":"Imtiaz, Jahanzaib ; Jasperneite, Jürgen: Performance impacts of different models. In: , 2012","chicago-de":"Imtiaz, Jahanzaib und Jürgen Jasperneite. 2012. Performance impacts of different models. In: .","van":"Imtiaz J, Jasperneite J. Performance impacts of different models. In 2012.","bjps":"Imtiaz J and Jasperneite J (2012) Performance Impacts of Different Models.","mla":"Imtiaz, Jahanzaib, and Jürgen Jasperneite. Performance Impacts of Different Models. 2012.","havard":"J. Imtiaz, J. Jasperneite, Performance impacts of different models, in: 2012.","ufg":"Imtiaz, Jahanzaib/Jasperneite, Jürgen (2012): Performance impacts of different models, in: .","apa":"Imtiaz, J., & Jasperneite, J. (2012). Performance impacts of different models. Presented at the IEEE 802.1 AVB Task Group Real Time communication Symposium, Munich, Germany.","chicago":"Imtiaz, Jahanzaib, and Jürgen Jasperneite. “Performance Impacts of Different Models,” 2012."},"title":"Performance impacts of different models","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"location":"Munich, Germany","name":"IEEE 802.1 AVB Task Group Real Time communication Symposium"},"year":2012,"author":[{"full_name":"Imtiaz, Jahanzaib","first_name":"Jahanzaib","last_name":"Imtiaz"},{"id":"1899","last_name":"Jasperneite","first_name":"Jürgen","full_name":"Jasperneite, Jürgen"}]},{"date_created":"2021-01-26T12:51:48Z","type":"journal_article","publication":"Advances in Intelligent and Soft Computing","intvolume":" 133","date_updated":"2023-03-15T13:49:53Z","user_id":"45673","_id":"4527","language":[{"iso":"eng"}],"title":"Modeling and Testing of Automation Systems","citation":{"ufg":"Kumar, Barath et. al. (2012): Modeling and Testing of Automation Systems, in: Advances in Intelligent and Soft Computing 133, S. 1027–1034.","bjps":"Kumar B et al. (2012) Modeling and Testing of Automation Systems. Advances in Intelligent and Soft Computing 133, 1027–1034.","havard":"B. Kumar, O. Niggemann, W. Schäfer, J. Jasperneite, Modeling and Testing of Automation Systems, Advances in Intelligent and Soft Computing. 133 (2012) 1027–1034.","mla":"Kumar, Barath, et al. “Modeling and Testing of Automation Systems.” Advances in Intelligent and Soft Computing, vol. 133, 2012, pp. 1027–34.","van":"Kumar B, Niggemann O, Schäfer W, Jasperneite J. Modeling and Testing of Automation Systems. Advances in Intelligent and Soft Computing. 2012;133:1027–34.","ama":"Kumar B, Niggemann O, Schäfer W, Jasperneite J. Modeling and Testing of Automation Systems. Advances in Intelligent and Soft Computing. 2012;133:1027-1034.","chicago":"Kumar, Barath, Oliver Niggemann, Wilhelm Schäfer, and Jürgen Jasperneite. “Modeling and Testing of Automation Systems.” Advances in Intelligent and Soft Computing 133 (2012): 1027–34.","apa":"Kumar, B., Niggemann, O., Schäfer, W., & Jasperneite, J. (2012). Modeling and Testing of Automation Systems. Advances in Intelligent and Soft Computing, 133, 1027–1034.","ieee":"B. Kumar, O. Niggemann, W. Schäfer, and J. Jasperneite, “Modeling and Testing of Automation Systems,” Advances in Intelligent and Soft Computing, vol. 133, pp. 1027–1034, 2012.","chicago-de":"Kumar, Barath, Oliver Niggemann, Wilhelm Schäfer und Jürgen Jasperneite. 2012. Modeling and Testing of Automation Systems. Advances in Intelligent and Soft Computing 133: 1027–1034.","din1505-2-1":"Kumar, Barath ; Niggemann, Oliver ; Schäfer, Wilhelm ; Jasperneite, Jürgen: Modeling and Testing of Automation Systems. In: Advances in Intelligent and Soft Computing Bd. 133 (2012), S. 1027–1034","short":"B. Kumar, O. Niggemann, W. Schäfer, J. Jasperneite, Advances in Intelligent and Soft Computing 133 (2012) 1027–1034."},"volume":133,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2012,"author":[{"full_name":"Kumar, Barath","first_name":"Barath","last_name":"Kumar"},{"full_name":"Niggemann, Oliver","id":"10876","last_name":"Niggemann","first_name":"Oliver"},{"last_name":"Schäfer","full_name":"Schäfer, Wilhelm","first_name":"Wilhelm"},{"full_name":"Jasperneite, Jürgen","first_name":"Jürgen","last_name":"Jasperneite","id":"1899"}],"page":"1027-1034","status":"public"},{"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"first_name":"Sebastian","last_name":"Schriegel","full_name":"Schriegel, Sebastian"},{"first_name":"Jürgen","id":"1899","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite"}],"year":2012,"publisher":"OVE-Verbandszeitschrift Springer-Verlag GmbH","status":"public","title":"Sicherheits- und Datenschutzanforderungen an Smart Grid-Technologien","citation":{"ama":"Schriegel S, Jasperneite J. Sicherheits- und Datenschutzanforderungen an Smart Grid-Technologien. e&i, elektrotechnik und informationstechnik. 2012.","ieee":"S. Schriegel and J. Jasperneite, “Sicherheits- und Datenschutzanforderungen an Smart Grid-Technologien,” e&i, elektrotechnik und informationstechnik, 2012.","short":"S. Schriegel, J. Jasperneite, E&i, Elektrotechnik Und Informationstechnik (2012).","din1505-2-1":"Schriegel, Sebastian ; Jasperneite, Jürgen: Sicherheits- und Datenschutzanforderungen an Smart Grid-Technologien. In: e&i, elektrotechnik und informationstechnik. Wien, OVE-Verbandszeitschrift Springer-Verlag GmbH (2012)","chicago-de":"Schriegel, Sebastian und Jürgen Jasperneite. 2012. Sicherheits- und Datenschutzanforderungen an Smart Grid-Technologien. e&i, elektrotechnik und informationstechnik.","van":"Schriegel S, Jasperneite J. Sicherheits- und Datenschutzanforderungen an Smart Grid-Technologien. e&i, elektrotechnik und informationstechnik. 2012;","bjps":"Schriegel S and Jasperneite J (2012) Sicherheits- Und Datenschutzanforderungen an Smart Grid-Technologien. e&i, elektrotechnik und informationstechnik.","havard":"S. Schriegel, J. Jasperneite, Sicherheits- und Datenschutzanforderungen an Smart Grid-Technologien, E&i, Elektrotechnik Und Informationstechnik. (2012).","mla":"Schriegel, Sebastian, and Jürgen Jasperneite. “Sicherheits- Und Datenschutzanforderungen an Smart Grid-Technologien.” E&i, Elektrotechnik Und Informationstechnik, OVE-Verbandszeitschrift Springer-Verlag GmbH, 2012.","ufg":"Schriegel, Sebastian/Jasperneite, Jürgen (2012): Sicherheits- und Datenschutzanforderungen an Smart Grid-Technologien, in: e&i, elektrotechnik und informationstechnik.","apa":"Schriegel, S., & Jasperneite, J. (2012). Sicherheits- und Datenschutzanforderungen an Smart Grid-Technologien. E&i, Elektrotechnik Und Informationstechnik.","chicago":"Schriegel, Sebastian, and Jürgen Jasperneite. “Sicherheits- Und Datenschutzanforderungen an Smart Grid-Technologien.” E&i, Elektrotechnik Und Informationstechnik, 2012."},"_id":"4528","language":[{"iso":"eng"}],"place":"Wien","type":"journal_article","date_created":"2021-01-26T12:53:43Z","publication":"e&i, elektrotechnik und informationstechnik","date_updated":"2023-03-15T13:49:53Z","user_id":"45673"},{"date_updated":"2023-03-15T13:49:53Z","user_id":"45673","date_created":"2021-01-26T12:59:25Z","type":"conference","_id":"4529","language":[{"iso":"eng"}],"citation":{"havard":"J. Imtiaz, J. Jasperneite, K. Weber, Approaches to reduce the Latency for High Priority Traffic in IEEE 802.1 AVB Networks, in: 2012.","mla":"Imtiaz, Jahanzaib, et al. Approaches to Reduce the Latency for High Priority Traffic in IEEE 802.1 AVB Networks. 2012.","bjps":"Imtiaz J, Jasperneite J and Weber K (2012) Approaches to Reduce the Latency for High Priority Traffic in IEEE 802.1 AVB Networks.","ufg":"Imtiaz, Jahanzaib et. al. (2012): Approaches to reduce the Latency for High Priority Traffic in IEEE 802.1 AVB Networks, in: .","van":"Imtiaz J, Jasperneite J, Weber K. Approaches to reduce the Latency for High Priority Traffic in IEEE 802.1 AVB Networks. In 2012.","chicago":"Imtiaz, Jahanzaib, Jürgen Jasperneite, and Karl Weber. “Approaches to Reduce the Latency for High Priority Traffic in IEEE 802.1 AVB Networks,” 2012.","apa":"Imtiaz, J., Jasperneite, J., & Weber, K. (2012). Approaches to reduce the Latency for High Priority Traffic in IEEE 802.1 AVB Networks. Presented at the 9th IEEE International Workshop on Factory Communication Systems (WFCS 2012), Lemgo.","din1505-2-1":"Imtiaz, Jahanzaib ; Jasperneite, Jürgen ; Weber, Karl: Approaches to reduce the Latency for High Priority Traffic in IEEE 802.1 AVB Networks. In: , 2012","chicago-de":"Imtiaz, Jahanzaib, Jürgen Jasperneite und Karl Weber. 2012. Approaches to reduce the Latency for High Priority Traffic in IEEE 802.1 AVB Networks. In: .","short":"J. Imtiaz, J. Jasperneite, K. Weber, in: 2012.","ama":"Imtiaz J, Jasperneite J, Weber K. Approaches to reduce the Latency for High Priority Traffic in IEEE 802.1 AVB Networks. In: ; 2012.","ieee":"J. Imtiaz, J. Jasperneite, and K. Weber, “Approaches to reduce the Latency for High Priority Traffic in IEEE 802.1 AVB Networks,” presented at the 9th IEEE International Workshop on Factory Communication Systems (WFCS 2012), Lemgo, 2012."},"title":"Approaches to reduce the Latency for High Priority Traffic in IEEE 802.1 AVB Networks","status":"public","conference":{"location":"Lemgo","name":"9th IEEE International Workshop on Factory Communication Systems (WFCS 2012)"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2012,"author":[{"last_name":"Imtiaz","full_name":"Imtiaz, Jahanzaib","first_name":"Jahanzaib"},{"id":"1899","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","first_name":"Jürgen"},{"first_name":"Karl","last_name":"Weber","full_name":"Weber, Karl"}]},{"title":"Fast and simple scheduling algorithm for PROFINET IRT networks","citation":{"ama":"Wisniewski L, Schumacher M, Schriegel S, Jasperneite J. Fast and simple scheduling algorithm for PROFINET IRT networks. In: ; 2012.","ieee":"L. Wisniewski, M. Schumacher, S. Schriegel, and J. Jasperneite, “Fast and simple scheduling algorithm for PROFINET IRT networks,” presented at the 9th IEEE International Workshop on Factory Communication Systems (WFCS 2012), Lemgo, 2012.","din1505-2-1":"Wisniewski, Lukasz ; Schumacher, Markus ; Schriegel, Sebastian ; Jasperneite, Jürgen: Fast and simple scheduling algorithm for PROFINET IRT networks. In: , 2012","chicago-de":"Wisniewski, Lukasz, Markus Schumacher, Sebastian Schriegel und Jürgen Jasperneite. 2012. Fast and simple scheduling algorithm for PROFINET IRT networks. In: .","short":"L. Wisniewski, M. Schumacher, S. Schriegel, J. Jasperneite, in: 2012.","ufg":"Wisniewski, Lukasz et. al. (2012): Fast and simple scheduling algorithm for PROFINET IRT networks, in: .","havard":"L. Wisniewski, M. Schumacher, S. Schriegel, J. Jasperneite, Fast and simple scheduling algorithm for PROFINET IRT networks, in: 2012.","mla":"Wisniewski, Lukasz, et al. Fast and Simple Scheduling Algorithm for PROFINET IRT Networks. 2012.","bjps":"Wisniewski L et al. (2012) Fast and Simple Scheduling Algorithm for PROFINET IRT Networks.","van":"Wisniewski L, Schumacher M, Schriegel S, Jasperneite J. Fast and simple scheduling algorithm for PROFINET IRT networks. In 2012.","chicago":"Wisniewski, Lukasz, Markus Schumacher, Sebastian Schriegel, and Jürgen Jasperneite. “Fast and Simple Scheduling Algorithm for PROFINET IRT Networks,” 2012.","apa":"Wisniewski, L., Schumacher, M., Schriegel, S., & Jasperneite, J. (2012). Fast and simple scheduling algorithm for PROFINET IRT networks. Presented at the 9th IEEE International Workshop on Factory Communication Systems (WFCS 2012), Lemgo."},"author":[{"last_name":"Wisniewski","full_name":"Wisniewski, Lukasz","first_name":"Lukasz","id":"1710"},{"last_name":"Schumacher","first_name":"Markus","full_name":"Schumacher, Markus"},{"full_name":"Schriegel, Sebastian","first_name":"Sebastian","last_name":"Schriegel"},{"last_name":"Jasperneite","first_name":"Jürgen","full_name":"Jasperneite, Jürgen","id":"1899"}],"year":2012,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"name":"9th IEEE International Workshop on Factory Communication Systems (WFCS 2012)","location":"Lemgo"},"status":"public","date_created":"2021-01-26T13:02:45Z","type":"conference","user_id":"45673","date_updated":"2023-03-15T13:49:53Z","language":[{"iso":"eng"}],"_id":"4530"},{"citation":{"ama":"Flatt H, Schriegel S, Neugarth T, Jasperneite J. An FPGA based HSR Architecture for Seamless PROFINET Redundancy. In: ; 2012.","ieee":"H. Flatt, S. Schriegel, T. Neugarth, and J. Jasperneite, “An FPGA based HSR Architecture for Seamless PROFINET Redundancy,” presented at the 9th IEEE International Workshop on Factory Communication Systems (WFCS 2012), Lemgo, 2012.","ufg":"Flatt, Holger et. al. (2012): An FPGA based HSR Architecture for Seamless PROFINET Redundancy, in: .","havard":"H. Flatt, S. Schriegel, T. Neugarth, J. Jasperneite, An FPGA based HSR Architecture for Seamless PROFINET Redundancy, in: 2012.","mla":"Flatt, Holger, et al. An FPGA Based HSR Architecture for Seamless PROFINET Redundancy. 2012.","bjps":"Flatt H et al. (2012) An FPGA Based HSR Architecture for Seamless PROFINET Redundancy.","van":"Flatt H, Schriegel S, Neugarth T, Jasperneite J. An FPGA based HSR Architecture for Seamless PROFINET Redundancy. In 2012.","chicago":"Flatt, Holger, Sebastian Schriegel, Thimo Neugarth, and Jürgen Jasperneite. “An FPGA Based HSR Architecture for Seamless PROFINET Redundancy,” 2012.","apa":"Flatt, H., Schriegel, S., Neugarth, T., & Jasperneite, J. (2012). An FPGA based HSR Architecture for Seamless PROFINET Redundancy. Presented at the 9th IEEE International Workshop on Factory Communication Systems (WFCS 2012), Lemgo.","chicago-de":"Flatt, Holger, Sebastian Schriegel, Thimo Neugarth und Jürgen Jasperneite. 2012. An FPGA based HSR Architecture for Seamless PROFINET Redundancy. In: .","din1505-2-1":"Flatt, Holger ; Schriegel, Sebastian ; Neugarth, Thimo ; Jasperneite, Jürgen: An FPGA based HSR Architecture for Seamless PROFINET Redundancy. In: , 2012","short":"H. Flatt, S. Schriegel, T. Neugarth, J. Jasperneite, in: 2012."},"title":"An FPGA based HSR Architecture for Seamless PROFINET Redundancy","status":"public","author":[{"full_name":"Flatt, Holger","first_name":"Holger","id":"58494","last_name":"Flatt"},{"first_name":"Sebastian","full_name":"Schriegel, Sebastian","last_name":"Schriegel"},{"first_name":"Thimo","full_name":"Neugarth, Thimo","last_name":"Neugarth"},{"full_name":"Jasperneite, Jürgen","first_name":"Jürgen","id":"1899","last_name":"Jasperneite"}],"year":2012,"conference":{"name":"9th IEEE International Workshop on Factory Communication Systems (WFCS 2012)","location":"Lemgo"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"user_id":"45673","date_updated":"2023-03-15T13:49:53Z","type":"conference","date_created":"2021-01-26T13:05:11Z","language":[{"iso":"eng"}],"_id":"4531"},{"type":"conference","date_created":"2021-01-26T13:07:04Z","date_updated":"2023-03-15T13:49:53Z","user_id":"45673","language":[{"iso":"eng"}],"_id":"4532","title":"Performance Evaluation of Cellular Communication Systems for M2M Communication in Smart Grid Applications","citation":{"chicago":"Shrestha, Ganesh Man, and Jürgen Jasperneite. “Performance Evaluation of Cellular Communication Systems for M2M Communication in Smart Grid Applications,” 2012.","apa":"Shrestha, G. M., & Jasperneite, J. (2012). Performance Evaluation of Cellular Communication Systems for M2M Communication in Smart Grid Applications. Presented at the Computer Networks - CN2012, Szczyrk, POLAND.","bjps":"Shrestha GM and Jasperneite J (2012) Performance Evaluation of Cellular Communication Systems for M2M Communication in Smart Grid Applications.","mla":"Shrestha, Ganesh Man, and Jürgen Jasperneite. Performance Evaluation of Cellular Communication Systems for M2M Communication in Smart Grid Applications. 2012.","havard":"G.M. Shrestha, J. Jasperneite, Performance Evaluation of Cellular Communication Systems for M2M Communication in Smart Grid Applications, in: 2012.","ufg":"Shrestha, Ganesh Man/Jasperneite, Jürgen (2012): Performance Evaluation of Cellular Communication Systems for M2M Communication in Smart Grid Applications, in: .","van":"Shrestha GM, Jasperneite J. Performance Evaluation of Cellular Communication Systems for M2M Communication in Smart Grid Applications. In 2012.","chicago-de":"Shrestha, Ganesh Man und Jürgen Jasperneite. 2012. Performance Evaluation of Cellular Communication Systems for M2M Communication in Smart Grid Applications. In: .","din1505-2-1":"Shrestha, Ganesh Man ; Jasperneite, Jürgen: Performance Evaluation of Cellular Communication Systems for M2M Communication in Smart Grid Applications. In: , 2012","short":"G.M. Shrestha, J. Jasperneite, in: 2012.","ieee":"G. M. Shrestha and J. Jasperneite, “Performance Evaluation of Cellular Communication Systems for M2M Communication in Smart Grid Applications,” presented at the Computer Networks - CN2012, Szczyrk, POLAND, 2012.","ama":"Shrestha GM, Jasperneite J. Performance Evaluation of Cellular Communication Systems for M2M Communication in Smart Grid Applications. In: ; 2012."},"conference":{"location":"Szczyrk, POLAND","name":"Computer Networks - CN2012"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2012,"author":[{"first_name":"Ganesh Man","last_name":"Shrestha","full_name":"Shrestha, Ganesh Man"},{"id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"}],"status":"public"},{"_id":"4533","language":[{"iso":"eng"}],"date_updated":"2023-03-15T13:49:53Z","user_id":"45673","type":"conference","date_created":"2021-01-26T13:08:28Z","status":"public","conference":{"name":"7. Forum Innovationsmanagement: it´s OWL – Regionales Spitzencluster-Projekt „Intelligente Technische Systeme“ Innovationsimpulse und Transferstrukturen für den mittelständischen Maschinenbau ","location":"Lemgo"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"full_name":"Jasperneite, Jürgen","first_name":"Jürgen","last_name":"Jasperneite","id":"1899"}],"year":2012,"citation":{"ieee":"J. Jasperneite, “Intelligente Vernetzung ermöglicht Plug-and-Work im Maschinenbau,” presented at the 7. Forum Innovationsmanagement: it´s OWL – Regionales Spitzencluster-Projekt „Intelligente Technische Systeme“ Innovationsimpulse und Transferstrukturen für den mittelständischen Maschinenbau , Lemgo, 2012.","ama":"Jasperneite J. Intelligente Vernetzung ermöglicht Plug-and-Work im Maschinenbau. In: ; 2012.","short":"J. Jasperneite, in: 2012.","chicago-de":"Jasperneite, Jürgen. 2012. Intelligente Vernetzung ermöglicht Plug-and-Work im Maschinenbau. In: .","din1505-2-1":"Jasperneite, Jürgen: Intelligente Vernetzung ermöglicht Plug-and-Work im Maschinenbau. In: , 2012","apa":"Jasperneite, J. (2012). Intelligente Vernetzung ermöglicht Plug-and-Work im Maschinenbau. Presented at the 7. Forum Innovationsmanagement: it´s OWL – Regionales Spitzencluster-Projekt „Intelligente Technische Systeme“ Innovationsimpulse und Transferstrukturen für den mittelständischen Maschinenbau , Lemgo.","chicago":"Jasperneite, Jürgen. “Intelligente Vernetzung Ermöglicht Plug-and-Work Im Maschinenbau,” 2012.","van":"Jasperneite J. Intelligente Vernetzung ermöglicht Plug-and-Work im Maschinenbau. In 2012.","mla":"Jasperneite, Jürgen. Intelligente Vernetzung Ermöglicht Plug-and-Work Im Maschinenbau. 2012.","havard":"J. Jasperneite, Intelligente Vernetzung ermöglicht Plug-and-Work im Maschinenbau, in: 2012.","bjps":"Jasperneite J (2012) Intelligente Vernetzung Ermöglicht Plug-and-Work Im Maschinenbau.","ufg":"Jasperneite, Jürgen (2012): Intelligente Vernetzung ermöglicht Plug-and-Work im Maschinenbau, in: ."},"title":"Intelligente Vernetzung ermöglicht Plug-and-Work im Maschinenbau"},{"citation":{"chicago":"Jasperneite, Jürgen. “Intelligente Automation Unterstützt Und Entlastet Den Menschen.” In Maschinenbau Und Metallbearbeitung Deutschland . Kuhn Fachverlag GmbH & Co. KG, 2012.","ieee":"J. Jasperneite, “Intelligente Automation unterstützt und entlastet den Menschen,” in Maschinenbau und Metallbearbeitung Deutschland , Kuhn Fachverlag GmbH & Co. KG, 2012.","apa":"Jasperneite, J. (2012). Intelligente Automation unterstützt und entlastet den Menschen. In Maschinenbau und Metallbearbeitung Deutschland . Kuhn Fachverlag GmbH & Co. KG.","mla":"Jasperneite, Jürgen. “Intelligente Automation Unterstützt Und Entlastet Den Menschen.” Maschinenbau Und Metallbearbeitung Deutschland , Kuhn Fachverlag GmbH & Co. KG, 2012.","havard":"J. Jasperneite, Intelligente Automation unterstützt und entlastet den Menschen, in: Maschinenbau Und Metallbearbeitung Deutschland , Kuhn Fachverlag GmbH & Co. KG, 2012.","bjps":"Jasperneite J (2012) Intelligente Automation Unterstützt Und Entlastet Den Menschen. Maschinenbau Und Metallbearbeitung Deutschland . Kuhn Fachverlag GmbH & Co. KG.","ufg":"Jasperneite, Jürgen (2012): Intelligente Automation unterstützt und entlastet den Menschen, in: Maschinenbau und Metallbearbeitung Deutschland .","ama":"Jasperneite J. Intelligente Automation unterstützt und entlastet den Menschen. In: Maschinenbau Und Metallbearbeitung Deutschland . Kuhn Fachverlag GmbH & Co. KG; 2012.","van":"Jasperneite J. Intelligente Automation unterstützt und entlastet den Menschen. In: Maschinenbau und Metallbearbeitung Deutschland . Kuhn Fachverlag GmbH & Co. KG; 2012.","chicago-de":"Jasperneite, Jürgen. 2012. Intelligente Automation unterstützt und entlastet den Menschen. In: Maschinenbau und Metallbearbeitung Deutschland . Kuhn Fachverlag GmbH & Co. KG.","din1505-2-1":"Jasperneite, Jürgen: Intelligente Automation unterstützt und entlastet den Menschen. In: Maschinenbau und Metallbearbeitung Deutschland : Kuhn Fachverlag GmbH & Co. KG, 2012","short":"J. Jasperneite, in: Maschinenbau Und Metallbearbeitung Deutschland , Kuhn Fachverlag GmbH & Co. KG, 2012."},"title":"Intelligente Automation unterstützt und entlastet den Menschen","publisher":"Kuhn Fachverlag GmbH & Co. KG","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"first_name":"Jürgen","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","id":"1899"}],"year":2012,"date_updated":"2023-03-15T13:49:53Z","user_id":"45673","date_created":"2021-01-26T13:13:52Z","type":"book_chapter","publication_identifier":{"issn":["ISSN 1614-242X"]},"publication":"Maschinenbau und Metallbearbeitung Deutschland ","_id":"4534","language":[{"iso":"eng"}]},{"status":"public","publisher":"Oldenbourg Verlag","author":[{"last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"},{"last_name":"Niggemann","first_name":"Oliver","id":"10876","full_name":"Niggemann, Oliver"}],"year":2012,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"issue":"9","citation":{"short":"J. Jasperneite, O. Niggemann, ATP Edition - Automatisierungstechnische Praxis (2012).","chicago-de":"Jasperneite, Jürgen und Oliver Niggemann. 2012. Intelligente Assistenzsysteme zur Beherrschung der Systemkomplexität in der Automation. ATP edition - Automatisierungstechnische Praxis , Nr. 9.","din1505-2-1":"Jasperneite, Jürgen ; Niggemann, Oliver: Intelligente Assistenzsysteme zur Beherrschung der Systemkomplexität in der Automation. In: ATP edition - Automatisierungstechnische Praxis . München, Oldenbourg Verlag (2012), Nr. 9","van":"Jasperneite J, Niggemann O. Intelligente Assistenzsysteme zur Beherrschung der Systemkomplexität in der Automation. ATP edition - Automatisierungstechnische Praxis . 2012;(9).","ufg":"Jasperneite, Jürgen/Niggemann, Oliver (2012): Intelligente Assistenzsysteme zur Beherrschung der Systemkomplexität in der Automation, in: ATP edition - Automatisierungstechnische Praxis (9).","bjps":"Jasperneite J and Niggemann O (2012) Intelligente Assistenzsysteme Zur Beherrschung Der Systemkomplexität in Der Automation. ATP edition - Automatisierungstechnische Praxis .","mla":"Jasperneite, Jürgen, and Oliver Niggemann. “Intelligente Assistenzsysteme Zur Beherrschung Der Systemkomplexität in Der Automation.” ATP Edition - Automatisierungstechnische Praxis , no. 9, Oldenbourg Verlag, 2012.","havard":"J. Jasperneite, O. Niggemann, Intelligente Assistenzsysteme zur Beherrschung der Systemkomplexität in der Automation, ATP Edition - Automatisierungstechnische Praxis . (2012).","apa":"Jasperneite, J., & Niggemann, O. (2012). Intelligente Assistenzsysteme zur Beherrschung der Systemkomplexität in der Automation. ATP Edition - Automatisierungstechnische Praxis , (9).","chicago":"Jasperneite, Jürgen, and Oliver Niggemann. “Intelligente Assistenzsysteme Zur Beherrschung Der Systemkomplexität in Der Automation.” ATP Edition - Automatisierungstechnische Praxis , no. 9 (2012).","ama":"Jasperneite J, Niggemann O. Intelligente Assistenzsysteme zur Beherrschung der Systemkomplexität in der Automation. ATP edition - Automatisierungstechnische Praxis . 2012;(9).","ieee":"J. Jasperneite and O. Niggemann, “Intelligente Assistenzsysteme zur Beherrschung der Systemkomplexität in der Automation,” ATP edition - Automatisierungstechnische Praxis , no. 9, 2012."},"title":"Intelligente Assistenzsysteme zur Beherrschung der Systemkomplexität in der Automation","place":"München","language":[{"iso":"eng"}],"_id":"4535","user_id":"45673","date_updated":"2023-03-15T13:49:53Z","publication":"ATP edition - Automatisierungstechnische Praxis ","type":"journal_article","date_created":"2021-01-26T13:15:38Z"},{"_id":"4536","language":[{"iso":"eng"}],"user_id":"45673","date_updated":"2023-03-15T13:49:53Z","date_created":"2021-01-26T13:17:12Z","type":"conference","status":"public","year":2012,"author":[{"first_name":"Jürgen","last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"location":"Fraunhofer-Forum, Berlin","name":"Cyber-Physische Systeme: Das Internet der Dinge rollt an"},"citation":{"ieee":"J. Jasperneite, “Wandlungsfähige Automation ,” presented at the Cyber-Physische Systeme: Das Internet der Dinge rollt an, Fraunhofer-Forum, Berlin, 2012.","apa":"Jasperneite, J. (2012). Wandlungsfähige Automation . Presented at the Cyber-Physische Systeme: Das Internet der Dinge rollt an, Fraunhofer-Forum, Berlin.","chicago":"Jasperneite, Jürgen. “Wandlungsfähige Automation ,” 2012.","ama":"Jasperneite J. Wandlungsfähige Automation . In: ; 2012.","van":"Jasperneite J. Wandlungsfähige Automation . In 2012.","havard":"J. Jasperneite, Wandlungsfähige Automation , in: 2012.","bjps":"Jasperneite J (2012) Wandlungsfähige Automation .","mla":"Jasperneite, Jürgen. Wandlungsfähige Automation . 2012.","ufg":"Jasperneite, Jürgen (2012): Wandlungsfähige Automation , in: .","short":"J. Jasperneite, in: 2012.","chicago-de":"Jasperneite, Jürgen. 2012. Wandlungsfähige Automation . In: .","din1505-2-1":"Jasperneite, Jürgen: Wandlungsfähige Automation . In: , 2012"},"title":"Wandlungsfähige Automation "},{"title":"An FPGA based Approach for the Enhancement of COTS Switch ASICs with Real-Time Ethernet Functions","citation":{"ama":"Flatt H, Schriegel S, Jasperneite J, Schewe F. An FPGA based Approach for the Enhancement of COTS Switch ASICs with Real-Time Ethernet Functions. In: ; 2012.","van":"Flatt H, Schriegel S, Jasperneite J, Schewe F. An FPGA based Approach for the Enhancement of COTS Switch ASICs with Real-Time Ethernet Functions. In 2012.","mla":"Flatt, Holger, et al. An FPGA Based Approach for the Enhancement of COTS Switch ASICs with Real-Time Ethernet Functions. 2012.","havard":"H. Flatt, S. Schriegel, J. Jasperneite, F. Schewe, An FPGA based Approach for the Enhancement of COTS Switch ASICs with Real-Time Ethernet Functions, in: 2012.","bjps":"Flatt H et al. (2012) An FPGA Based Approach for the Enhancement of COTS Switch ASICs with Real-Time Ethernet Functions.","ufg":"Flatt, Holger et. al. (2012): An FPGA based Approach for the Enhancement of COTS Switch ASICs with Real-Time Ethernet Functions, in: .","ieee":"H. Flatt, S. Schriegel, J. Jasperneite, and F. Schewe, “An FPGA based Approach for the Enhancement of COTS Switch ASICs with Real-Time Ethernet Functions,” presented at the 17th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2012) , Krakow, Poland, 2012.","apa":"Flatt, H., Schriegel, S., Jasperneite, J., & Schewe, F. (2012). An FPGA based Approach for the Enhancement of COTS Switch ASICs with Real-Time Ethernet Functions. Presented at the 17th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2012) , Krakow, Poland.","chicago":"Flatt, Holger, Sebastian Schriegel, Jürgen Jasperneite, and Frank Schewe. “An FPGA Based Approach for the Enhancement of COTS Switch ASICs with Real-Time Ethernet Functions,” 2012.","short":"H. Flatt, S. Schriegel, J. Jasperneite, F. Schewe, in: 2012.","din1505-2-1":"Flatt, Holger ; Schriegel, Sebastian ; Jasperneite, Jürgen ; Schewe, Frank: An FPGA based Approach for the Enhancement of COTS Switch ASICs with Real-Time Ethernet Functions. In: , 2012","chicago-de":"Flatt, Holger, Sebastian Schriegel, Jürgen Jasperneite und Frank Schewe. 2012. An FPGA based Approach for the Enhancement of COTS Switch ASICs with Real-Time Ethernet Functions. In: ."},"author":[{"id":"58494","first_name":"Holger","last_name":"Flatt","full_name":"Flatt, Holger"},{"last_name":"Schriegel","first_name":"Sebastian","full_name":"Schriegel, Sebastian"},{"last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"},{"last_name":"Schewe","first_name":"Frank","full_name":"Schewe, Frank"}],"year":2012,"conference":{"location":"Krakow, Poland","name":"17th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2012) "},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public","date_created":"2021-01-26T13:20:07Z","type":"conference","user_id":"45673","date_updated":"2023-03-15T13:49:53Z","_id":"4537","language":[{"iso":"eng"}]},{"title":"Towards Autoconfiguration of Industrial Automation Systems: A Case Study Using PROFINET IO","citation":{"ama":"Dürkop L, Trsek H, Jasperneite J, Wisniewski L. Towards Autoconfiguration of Industrial Automation Systems: A Case Study Using PROFINET IO. In: ; 2012.","van":"Dürkop L, Trsek H, Jasperneite J, Wisniewski L. Towards Autoconfiguration of Industrial Automation Systems: A Case Study Using PROFINET IO. In 2012.","havard":"L. Dürkop, H. Trsek, J. Jasperneite, L. Wisniewski, Towards Autoconfiguration of Industrial Automation Systems: A Case Study Using PROFINET IO, in: 2012.","bjps":"Dürkop L et al. (2012) Towards Autoconfiguration of Industrial Automation Systems: A Case Study Using PROFINET IO.","mla":"Dürkop, Lars, et al. Towards Autoconfiguration of Industrial Automation Systems: A Case Study Using PROFINET IO. 2012.","ufg":"Dürkop, Lars et. al. (2012): Towards Autoconfiguration of Industrial Automation Systems: A Case Study Using PROFINET IO, in: .","ieee":"L. Dürkop, H. Trsek, J. Jasperneite, and L. Wisniewski, “Towards Autoconfiguration of Industrial Automation Systems: A Case Study Using PROFINET IO,” presented at the 17th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2012), Krakau, Poland, 2012.","apa":"Dürkop, L., Trsek, H., Jasperneite, J., & Wisniewski, L. (2012). Towards Autoconfiguration of Industrial Automation Systems: A Case Study Using PROFINET IO. Presented at the 17th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2012), Krakau, Poland.","chicago":"Dürkop, Lars, Henning Trsek, Jürgen Jasperneite, and Lukasz Wisniewski. “Towards Autoconfiguration of Industrial Automation Systems: A Case Study Using PROFINET IO,” 2012.","short":"L. Dürkop, H. Trsek, J. Jasperneite, L. Wisniewski, in: 2012.","din1505-2-1":"Dürkop, Lars ; Trsek, Henning ; Jasperneite, Jürgen ; Wisniewski, Lukasz: Towards Autoconfiguration of Industrial Automation Systems: A Case Study Using PROFINET IO. In: , 2012","chicago-de":"Dürkop, Lars, Henning Trsek, Jürgen Jasperneite und Lukasz Wisniewski. 2012. Towards Autoconfiguration of Industrial Automation Systems: A Case Study Using PROFINET IO. In: ."},"conference":{"name":"17th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2012)","location":"Krakau, Poland"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"last_name":"Dürkop","first_name":"Lars","full_name":"Dürkop, Lars"},{"first_name":"Henning","last_name":"Trsek","id":"1486","full_name":"Trsek, Henning"},{"first_name":"Jürgen","full_name":"Jasperneite, Jürgen","id":"1899","last_name":"Jasperneite"},{"last_name":"Wisniewski","id":"1710","full_name":"Wisniewski, Lukasz","first_name":"Lukasz"}],"year":2012,"status":"public","date_created":"2021-01-26T13:22:34Z","type":"conference","date_updated":"2023-03-15T13:49:53Z","user_id":"45673","language":[{"iso":"eng"}],"_id":"4539"},{"citation":{"ama":"Kumar B, Toensfeuerborn A, Niggemann O, Schäfer W, Jasperneite J. Experience in deploying MBT for industrial automation. In: ; 2012.","ieee":"B. Kumar, A. Toensfeuerborn, O. Niggemann, W. Schäfer, and J. Jasperneite, “Experience in deploying MBT for industrial automation,” presented at the ETSI Model Based Testing User Conference (MBTUC), Tallinn, Estonia, 2012.","van":"Kumar B, Toensfeuerborn A, Niggemann O, Schäfer W, Jasperneite J. Experience in deploying MBT for industrial automation. In 2012.","ufg":"Kumar, Barath et. al. (2012): Experience in deploying MBT for industrial automation, in: .","bjps":"Kumar B et al. (2012) Experience in Deploying MBT for Industrial Automation.","havard":"B. Kumar, A. Toensfeuerborn, O. Niggemann, W. Schäfer, J. Jasperneite, Experience in deploying MBT for industrial automation, in: 2012.","mla":"Kumar, Barath, et al. Experience in Deploying MBT for Industrial Automation. 2012.","apa":"Kumar, B., Toensfeuerborn, A., Niggemann, O., Schäfer, W., & Jasperneite, J. (2012). Experience in deploying MBT for industrial automation. Presented at the ETSI Model Based Testing User Conference (MBTUC), Tallinn, Estonia.","chicago":"Kumar, Barath, Andreas Toensfeuerborn, Oliver Niggemann, Wilhelm Schäfer, and Jürgen Jasperneite. “Experience in Deploying MBT for Industrial Automation,” 2012.","short":"B. Kumar, A. Toensfeuerborn, O. Niggemann, W. Schäfer, J. Jasperneite, in: 2012.","chicago-de":"Kumar, Barath, Andreas Toensfeuerborn, Oliver Niggemann, Wilhelm Schäfer und Jürgen Jasperneite. 2012. Experience in deploying MBT for industrial automation. In: .","din1505-2-1":"Kumar, Barath ; Toensfeuerborn, Andreas ; Niggemann, Oliver ; Schäfer, Wilhelm ; Jasperneite, Jürgen: Experience in deploying MBT for industrial automation. In: , 2012"},"title":"Experience in deploying MBT for industrial automation","status":"public","author":[{"first_name":"Barath","last_name":"Kumar","full_name":"Kumar, Barath"},{"first_name":"Andreas","last_name":"Toensfeuerborn","full_name":"Toensfeuerborn, Andreas"},{"last_name":"Niggemann","full_name":"Niggemann, Oliver","id":"10876","first_name":"Oliver"},{"full_name":"Schäfer, Wilhelm","first_name":"Wilhelm","last_name":"Schäfer"},{"id":"1899","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","first_name":"Jürgen"}],"year":2012,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"location":"Tallinn, Estonia","name":"ETSI Model Based Testing User Conference (MBTUC)"},"user_id":"45673","date_updated":"2023-03-15T13:49:53Z","type":"conference","date_created":"2021-01-26T13:25:04Z","_id":"4540","language":[{"iso":"eng"}]},{"title":"Machine-to-Machine-Kommunikation - Eine Chance für die deutsche Industrie","citation":{"short":"H. Trsek, J. Jasperneite, in: Digitale Infrastrukturen - Jahrbuch 2012/2013 Nationaler IT-Gipfel , 2012, pp. 199–230.","din1505-2-1":"Trsek, Henning ; Jasperneite, Jürgen: Machine-to-Machine-Kommunikation - Eine Chance für die deutsche Industrie. In: Digitale Infrastrukturen - Jahrbuch 2012/2013 Nationaler IT-Gipfel , 2012, S. 199–230","chicago-de":"Trsek, Henning und Jürgen Jasperneite. 2012. Machine-to-Machine-Kommunikation - Eine Chance für die deutsche Industrie. In: Digitale Infrastrukturen - Jahrbuch 2012/2013 Nationaler IT-Gipfel , 199–230.","van":"Trsek H, Jasperneite J. Machine-to-Machine-Kommunikation - Eine Chance für die deutsche Industrie. In: Digitale Infrastrukturen - Jahrbuch 2012/2013 Nationaler IT-Gipfel . 2012. p. 199–230.","ufg":"Trsek, Henning/Jasperneite, Jürgen (2012): Machine-to-Machine-Kommunikation - Eine Chance für die deutsche Industrie, in: Digitale Infrastrukturen - Jahrbuch 2012/2013 Nationaler IT-Gipfel , S. 199–230.","bjps":"Trsek H and Jasperneite J (2012) Machine-to-Machine-Kommunikation - Eine Chance Für Die Deutsche Industrie. Digitale Infrastrukturen - Jahrbuch 2012/2013 Nationaler IT-Gipfel . pp. 199–230.","mla":"Trsek, Henning, and Jürgen Jasperneite. “Machine-to-Machine-Kommunikation - Eine Chance Für Die Deutsche Industrie.” Digitale Infrastrukturen - Jahrbuch 2012/2013 Nationaler IT-Gipfel , 2012, pp. 199–230.","havard":"H. Trsek, J. Jasperneite, Machine-to-Machine-Kommunikation - Eine Chance für die deutsche Industrie, in: Digitale Infrastrukturen - Jahrbuch 2012/2013 Nationaler IT-Gipfel , 2012: pp. 199–230.","apa":"Trsek, H., & Jasperneite, J. (2012). Machine-to-Machine-Kommunikation - Eine Chance für die deutsche Industrie. In Digitale Infrastrukturen - Jahrbuch 2012/2013 Nationaler IT-Gipfel (pp. 199–230). Berlin.","chicago":"Trsek, Henning, and Jürgen Jasperneite. “Machine-to-Machine-Kommunikation - Eine Chance Für Die Deutsche Industrie.” In Digitale Infrastrukturen - Jahrbuch 2012/2013 Nationaler IT-Gipfel , 199–230, 2012.","ama":"Trsek H, Jasperneite J. Machine-to-Machine-Kommunikation - Eine Chance für die deutsche Industrie. In: Digitale Infrastrukturen - Jahrbuch 2012/2013 Nationaler IT-Gipfel . ; 2012:199-230.","ieee":"H. Trsek and J. Jasperneite, “Machine-to-Machine-Kommunikation - Eine Chance für die deutsche Industrie,” in Digitale Infrastrukturen - Jahrbuch 2012/2013 Nationaler IT-Gipfel , 2012, pp. 199–230."},"abstract":[{"lang":"ger","text":"Arbeitsgruppe 2 des Nationalen IT-Gipfels"}],"conference":{"location":"Berlin","name":"Nationalen IT-Gipfels"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2012,"author":[{"first_name":"Henning","full_name":"Trsek, Henning","id":"1486","last_name":"Trsek"},{"first_name":"Jürgen","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","id":"1899"}],"page":"199 - 230","status":"public","type":"book_chapter","date_created":"2021-01-26T13:27:58Z","publication":"Digitale Infrastrukturen - Jahrbuch 2012/2013 Nationaler IT-Gipfel ","date_updated":"2023-03-15T13:49:53Z","user_id":"45673","_id":"4541","language":[{"iso":"eng"}]},{"conference":{"location":"Lemgo","name":"3. Jahreskolloquium \"Kommunikation in der Automation (KommA 2012)\""},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"first_name":"Lars","full_name":"Dürkop, Lars","last_name":"Dürkop"},{"first_name":"Jahanzaib","full_name":"Imtiaz, Jahanzaib","last_name":"Imtiaz"},{"first_name":"Henning","last_name":"Trsek","full_name":"Trsek, Henning","id":"1486"},{"last_name":"Jasperneite","first_name":"Jürgen","full_name":"Jasperneite, Jürgen","id":"1899"}],"year":2012,"status":"public","title":"Service Oriented Architecture for the Auto-configuration of Real-Time Ethernet Systems","citation":{"chicago-de":"Dürkop, Lars, Jahanzaib Imtiaz, Henning Trsek und Jürgen Jasperneite. 2012. Service Oriented Architecture for the Auto-configuration of Real-Time Ethernet Systems. In: .","din1505-2-1":"Dürkop, Lars ; Imtiaz, Jahanzaib ; Trsek, Henning ; Jasperneite, Jürgen: Service Oriented Architecture for the Auto-configuration of Real-Time Ethernet Systems. In: , 2012","short":"L. Dürkop, J. Imtiaz, H. Trsek, J. Jasperneite, in: 2012.","chicago":"Dürkop, Lars, Jahanzaib Imtiaz, Henning Trsek, and Jürgen Jasperneite. “Service Oriented Architecture for the Auto-Configuration of Real-Time Ethernet Systems,” 2012.","apa":"Dürkop, L., Imtiaz, J., Trsek, H., & Jasperneite, J. (2012). Service Oriented Architecture for the Auto-configuration of Real-Time Ethernet Systems. Presented at the 3. Jahreskolloquium “Kommunikation in der Automation (KommA 2012),” Lemgo.","ieee":"L. Dürkop, J. Imtiaz, H. Trsek, and J. Jasperneite, “Service Oriented Architecture for the Auto-configuration of Real-Time Ethernet Systems,” presented at the 3. Jahreskolloquium “Kommunikation in der Automation (KommA 2012),” Lemgo, 2012.","ufg":"Dürkop, Lars et. al. (2012): Service Oriented Architecture for the Auto-configuration of Real-Time Ethernet Systems, in: .","havard":"L. Dürkop, J. Imtiaz, H. Trsek, J. Jasperneite, Service Oriented Architecture for the Auto-configuration of Real-Time Ethernet Systems, in: 2012.","bjps":"Dürkop L et al. (2012) Service Oriented Architecture for the Auto-Configuration of Real-Time Ethernet Systems.","mla":"Dürkop, Lars, et al. Service Oriented Architecture for the Auto-Configuration of Real-Time Ethernet Systems. 2012.","van":"Dürkop L, Imtiaz J, Trsek H, Jasperneite J. Service Oriented Architecture for the Auto-configuration of Real-Time Ethernet Systems. In 2012.","ama":"Dürkop L, Imtiaz J, Trsek H, Jasperneite J. Service Oriented Architecture for the Auto-configuration of Real-Time Ethernet Systems. In: ; 2012."},"_id":"4543","language":[{"iso":"eng"}],"date_created":"2021-01-26T13:30:36Z","type":"conference","date_updated":"2023-03-15T13:49:53Z","user_id":"45673"},{"user_id":"45673","date_updated":"2023-03-15T13:49:53Z","editor":[{"first_name":"Jürgen","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","id":"1899"},{"first_name":"Ulrich","last_name":"Jumar","full_name":"Jumar, Ulrich"}],"date_created":"2021-01-26T13:32:37Z","type":"book_editor","place":"Lemgo","language":[{"iso":"eng"}],"_id":"4545","citation":{"chicago":"Jasperneite, Jürgen, and Ulrich Jumar, eds. Jahreskolloquium Kommunikation in Der Automation (KommA 2012). Lemgo, 2012.","apa":"Jasperneite, J., & Jumar, U. (Eds.). (2012). Jahreskolloquium Kommunikation in der Automation (KommA 2012). Presented at the 3. Jahreskolloquium “Kommunikation in der Automation (KommA 2012),” Lemgo.","bjps":"Jasperneite J and Jumar U (eds) (2012) Jahreskolloquium Kommunikation in Der Automation (KommA 2012). Lemgo.","mla":"Jasperneite, Jürgen, and Ulrich Jumar, editors. Jahreskolloquium Kommunikation in Der Automation (KommA 2012). 2012.","havard":"J. Jasperneite, U. Jumar, eds., Jahreskolloquium Kommunikation in der Automation (KommA 2012), Lemgo, 2012.","ufg":"Jasperneite, Jürgen/Jumar, Ulrich (Hgg.) (2012): Jahreskolloquium Kommunikation in der Automation (KommA 2012), Lemgo.","van":"Jasperneite J, Jumar U, editors. Jahreskolloquium Kommunikation in der Automation (KommA 2012). Lemgo; 2012.","din1505-2-1":"Jasperneite, J. ; Jumar, U. (Hrsg.): Jahreskolloquium Kommunikation in der Automation (KommA 2012). Lemgo, 2012","chicago-de":"Jasperneite, Jürgen und Ulrich Jumar, Hrsg. 2012. Jahreskolloquium Kommunikation in der Automation (KommA 2012). Lemgo.","short":"J. Jasperneite, U. Jumar, eds., Jahreskolloquium Kommunikation in Der Automation (KommA 2012), Lemgo, 2012.","ieee":"J. Jasperneite and U. Jumar, Eds., Jahreskolloquium Kommunikation in der Automation (KommA 2012). Lemgo, 2012.","ama":"Jasperneite J, Jumar U, eds. Jahreskolloquium Kommunikation in Der Automation (KommA 2012). Lemgo; 2012."},"title":"Jahreskolloquium Kommunikation in der Automation (KommA 2012)","status":"public","year":2012,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"name":"3. Jahreskolloquium \"Kommunikation in der Automation (KommA 2012)\"","location":"Lemgo"}},{"language":[{"iso":"eng"}],"_id":"4546","date_created":"2021-01-26T13:36:40Z","type":"conference","user_id":"45673","date_updated":"2023-03-15T13:49:53Z","author":[{"full_name":"Schriegel, Sebastian","last_name":"Schriegel","first_name":"Sebastian"},{"first_name":"Florian","last_name":"Pethig","full_name":"Pethig, Florian"},{"last_name":"Jasperneite","first_name":"Jürgen","id":"1899","full_name":"Jasperneite, Jürgen"}],"year":2012,"conference":{"location":"Stuttgart","name":"VDE-Kongress Smart Grid 2012 – Intelligente Energieversorgung der Zukunft"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public","title":"Intelligente Lastverschiebung in der Produktionstechnik – Ein Weg zum Industrial Smart Grid","citation":{"short":"S. Schriegel, F. Pethig, J. Jasperneite, in: 2012.","chicago-de":"Schriegel, Sebastian, Florian Pethig und Jürgen Jasperneite. 2012. Intelligente Lastverschiebung in der Produktionstechnik – Ein Weg zum Industrial Smart Grid. In: .","din1505-2-1":"Schriegel, Sebastian ; Pethig, Florian ; Jasperneite, Jürgen: Intelligente Lastverschiebung in der Produktionstechnik – Ein Weg zum Industrial Smart Grid. In: , 2012","van":"Schriegel S, Pethig F, Jasperneite J. Intelligente Lastverschiebung in der Produktionstechnik – Ein Weg zum Industrial Smart Grid. In 2012.","ama":"Schriegel S, Pethig F, Jasperneite J. Intelligente Lastverschiebung in der Produktionstechnik – Ein Weg zum Industrial Smart Grid. In: ; 2012.","ufg":"Schriegel, Sebastian et. al. (2012): Intelligente Lastverschiebung in der Produktionstechnik – Ein Weg zum Industrial Smart Grid, in: .","havard":"S. Schriegel, F. Pethig, J. Jasperneite, Intelligente Lastverschiebung in der Produktionstechnik – Ein Weg zum Industrial Smart Grid, in: 2012.","bjps":"Schriegel S, Pethig F and Jasperneite J (2012) Intelligente Lastverschiebung in Der Produktionstechnik – Ein Weg Zum Industrial Smart Grid.","mla":"Schriegel, Sebastian, et al. Intelligente Lastverschiebung in Der Produktionstechnik – Ein Weg Zum Industrial Smart Grid. 2012.","apa":"Schriegel, S., Pethig, F., & Jasperneite, J. (2012). Intelligente Lastverschiebung in der Produktionstechnik – Ein Weg zum Industrial Smart Grid. Presented at the VDE-Kongress Smart Grid 2012 – Intelligente Energieversorgung der Zukunft, Stuttgart.","ieee":"S. Schriegel, F. Pethig, and J. Jasperneite, “Intelligente Lastverschiebung in der Produktionstechnik – Ein Weg zum Industrial Smart Grid,” presented at the VDE-Kongress Smart Grid 2012 – Intelligente Energieversorgung der Zukunft, Stuttgart, 2012.","chicago":"Schriegel, Sebastian, Florian Pethig, and Jürgen Jasperneite. “Intelligente Lastverschiebung in Der Produktionstechnik – Ein Weg Zum Industrial Smart Grid,” 2012."}},{"_id":"4547","language":[{"iso":"eng"}],"date_updated":"2023-03-15T13:49:53Z","user_id":"45673","date_created":"2021-01-26T13:38:33Z","type":"book_chapter","publication":"Echtzeit 2012: „Kommunikation unter Echtzeitbedingungen”","publisher":"Boppard Springer-Verlag","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2012,"author":[{"first_name":"Jahanzaib","last_name":"Imtiaz","full_name":"Imtiaz, Jahanzaib"},{"id":"1899","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","first_name":"Jürgen"}],"citation":{"short":"J. Imtiaz, J. Jasperneite, in: Echtzeit 2012: „Kommunikation Unter Echtzeitbedingungen”, Boppard Springer-Verlag, 2012.","din1505-2-1":"Imtiaz, Jahanzaib ; Jasperneite, Jürgen: Common Automation Protocol Architecture and Real-time Interface (CAPRI). In: Echtzeit 2012: „Kommunikation unter Echtzeitbedingungen” : Boppard Springer-Verlag, 2012","chicago-de":"Imtiaz, Jahanzaib und Jürgen Jasperneite. 2012. Common Automation Protocol Architecture and Real-time Interface (CAPRI). In: Echtzeit 2012: „Kommunikation unter Echtzeitbedingungen”. Boppard Springer-Verlag.","apa":"Imtiaz, J., & Jasperneite, J. (2012). Common Automation Protocol Architecture and Real-time Interface (CAPRI). In Echtzeit 2012: „Kommunikation unter Echtzeitbedingungen”. Boppard Springer-Verlag.","chicago":"Imtiaz, Jahanzaib, and Jürgen Jasperneite. “Common Automation Protocol Architecture and Real-Time Interface (CAPRI).” In Echtzeit 2012: „Kommunikation Unter Echtzeitbedingungen”. Boppard Springer-Verlag, 2012.","van":"Imtiaz J, Jasperneite J. Common Automation Protocol Architecture and Real-time Interface (CAPRI). In: Echtzeit 2012: „Kommunikation unter Echtzeitbedingungen”. Boppard Springer-Verlag; 2012.","mla":"Imtiaz, Jahanzaib, and Jürgen Jasperneite. “Common Automation Protocol Architecture and Real-Time Interface (CAPRI).” Echtzeit 2012: „Kommunikation Unter Echtzeitbedingungen”, Boppard Springer-Verlag, 2012.","havard":"J. Imtiaz, J. Jasperneite, Common Automation Protocol Architecture and Real-time Interface (CAPRI), in: Echtzeit 2012: „Kommunikation Unter Echtzeitbedingungen”, Boppard Springer-Verlag, 2012.","bjps":"Imtiaz J and Jasperneite J (2012) Common Automation Protocol Architecture and Real-Time Interface (CAPRI). Echtzeit 2012: „Kommunikation Unter Echtzeitbedingungen”. Boppard Springer-Verlag.","ufg":"Imtiaz, Jahanzaib/Jasperneite, Jürgen (2012): Common Automation Protocol Architecture and Real-time Interface (CAPRI), in: Echtzeit 2012: „Kommunikation unter Echtzeitbedingungen”.","ieee":"J. Imtiaz and J. Jasperneite, “Common Automation Protocol Architecture and Real-time Interface (CAPRI),” in Echtzeit 2012: „Kommunikation unter Echtzeitbedingungen”, Boppard Springer-Verlag, 2012.","ama":"Imtiaz J, Jasperneite J. Common Automation Protocol Architecture and Real-time Interface (CAPRI). In: Echtzeit 2012: „Kommunikation Unter Echtzeitbedingungen”. Boppard Springer-Verlag; 2012."},"title":"Common Automation Protocol Architecture and Real-time Interface (CAPRI)"},{"_id":"4548","language":[{"iso":"eng"}],"user_id":"45673","date_updated":"2023-03-15T13:49:53Z","publication":"Computer&Automation","date_created":"2021-01-26T13:40:02Z","type":"journal_article","status":"public","page":"24-28","issue":"12","year":2012,"author":[{"full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","id":"1899","first_name":"Jürgen"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"citation":{"ieee":"J. Jasperneite, “Industrie 4.0 - Alter Wein in neuen Schläuchen? ,” Computer&Automation, no. 12, pp. 24–28, 2012.","ama":"Jasperneite J. Industrie 4.0 - Alter Wein in neuen Schläuchen? . Computer&Automation. 2012;(12):24-28.","apa":"Jasperneite, J. (2012). Industrie 4.0 - Alter Wein in neuen Schläuchen? . Computer&Automation, (12), 24–28.","chicago":"Jasperneite, Jürgen. “Industrie 4.0 - Alter Wein in Neuen Schläuchen? .” Computer&Automation, no. 12 (2012): 24–28.","van":"Jasperneite J. Industrie 4.0 - Alter Wein in neuen Schläuchen? . Computer&Automation. 2012;(12):24–8.","ufg":"Jasperneite, Jürgen (2012): Industrie 4.0 - Alter Wein in neuen Schläuchen? , in: Computer&Automation (12), S. 24–28.","havard":"J. Jasperneite, Industrie 4.0 - Alter Wein in neuen Schläuchen? , Computer&Automation. (2012) 24–28.","bjps":"Jasperneite J (2012) Industrie 4.0 - Alter Wein in Neuen Schläuchen? . Computer&Automation 24–28.","mla":"Jasperneite, Jürgen. “Industrie 4.0 - Alter Wein in Neuen Schläuchen? .” Computer&Automation, no. 12, 2012, pp. 24–28.","short":"J. Jasperneite, Computer&Automation (2012) 24–28.","din1505-2-1":"Jasperneite, Jürgen: Industrie 4.0 - Alter Wein in neuen Schläuchen? . In: Computer&Automation (2012), Nr. 12, S. 24–28","chicago-de":"Jasperneite, Jürgen. 2012. Industrie 4.0 - Alter Wein in neuen Schläuchen? . Computer&Automation, Nr. 12: 24–28."},"title":"Industrie 4.0 - Alter Wein in neuen Schläuchen? "},{"title":"Performance - optimierte Implementierung von EAX auf einer Java Card","citation":{"van":"McCord I. Performance - optimierte Implementierung von EAX auf einer Java Card. Lemgo: Technische Hochschule Ostwestfalen-Lippe; 2012.","ama":"McCord I. Performance - Optimierte Implementierung von EAX Auf Einer Java Card. Lemgo: Technische Hochschule Ostwestfalen-Lippe; 2012.","ufg":"McCord, Ian (2012): Performance - optimierte Implementierung von EAX auf einer Java Card, Lemgo.","mla":"McCord, Ian. Performance - Optimierte Implementierung von EAX Auf Einer Java Card. Technische Hochschule Ostwestfalen-Lippe, 2012.","havard":"I. McCord, Performance - optimierte Implementierung von EAX auf einer Java Card, Technische Hochschule Ostwestfalen-Lippe, Lemgo, 2012.","bjps":"McCord I (2012) Performance - Optimierte Implementierung von EAX Auf Einer Java Card. Lemgo: Technische Hochschule Ostwestfalen-Lippe.","apa":"McCord, I. (2012). Performance - optimierte Implementierung von EAX auf einer Java Card. Lemgo: Technische Hochschule Ostwestfalen-Lippe.","ieee":"I. McCord, Performance - optimierte Implementierung von EAX auf einer Java Card. Lemgo: Technische Hochschule Ostwestfalen-Lippe, 2012.","chicago":"McCord, Ian. Performance - Optimierte Implementierung von EAX Auf Einer Java Card. Lemgo: Technische Hochschule Ostwestfalen-Lippe, 2012.","short":"I. McCord, Performance - Optimierte Implementierung von EAX Auf Einer Java Card, Technische Hochschule Ostwestfalen-Lippe, Lemgo, 2012.","chicago-de":"McCord, Ian. 2012. Performance - optimierte Implementierung von EAX auf einer Java Card. Lemgo: Technische Hochschule Ostwestfalen-Lippe.","din1505-2-1":"McCord, Ian: Performance - optimierte Implementierung von EAX auf einer Java Card. Lemgo : Technische Hochschule Ostwestfalen-Lippe, 2012"},"department":[{"_id":"DEP5000"},{"_id":"DEP5023"},{"_id":"DEP5025"}],"author":[{"last_name":"McCord","full_name":"McCord, Ian","first_name":"Ian"}],"year":2012,"publisher":"Technische Hochschule Ostwestfalen-Lippe","status":"public","date_created":"2022-05-30T15:47:38Z","type":"bachelor_thesis","date_updated":"2023-03-15T13:50:14Z","user_id":"10982","_id":"8316","language":[{"iso":"eng"}],"place":"Lemgo"},{"department":[{"_id":"DEP5000"},{"_id":"DEP5023"},{"_id":"DEP5025"}],"year":2012,"author":[{"last_name":"Ulbrich","first_name":"Hendrik","full_name":"Ulbrich, Hendrik"}],"publisher":"Technische Hochschule Ostwestfalen-Lippe","status":"public","title":"Entwicklung eines ressourcenoptimierten Software-Stacks für eingebettete Systeme zur Anbindung eines Trusted Platform Modules (TPM)","citation":{"din1505-2-1":"Ulbrich, Hendrik: Entwicklung eines ressourcenoptimierten Software-Stacks für eingebettete Systeme zur Anbindung eines Trusted Platform Modules (TPM). Lemgo : Technische Hochschule Ostwestfalen-Lippe, 2012","chicago-de":"Ulbrich, Hendrik. 2012. Entwicklung eines ressourcenoptimierten Software-Stacks für eingebettete Systeme zur Anbindung eines Trusted Platform Modules (TPM). Lemgo: Technische Hochschule Ostwestfalen-Lippe.","short":"H. Ulbrich, Entwicklung Eines Ressourcenoptimierten Software-Stacks Für Eingebettete Systeme Zur Anbindung Eines Trusted Platform Modules (TPM), Technische Hochschule Ostwestfalen-Lippe, Lemgo, 2012.","chicago":"Ulbrich, Hendrik. Entwicklung Eines Ressourcenoptimierten Software-Stacks Für Eingebettete Systeme Zur Anbindung Eines Trusted Platform Modules (TPM). Lemgo: Technische Hochschule Ostwestfalen-Lippe, 2012.","apa":"Ulbrich, H. (2012). Entwicklung eines ressourcenoptimierten Software-Stacks für eingebettete Systeme zur Anbindung eines Trusted Platform Modules (TPM). Lemgo: Technische Hochschule Ostwestfalen-Lippe.","ieee":"H. Ulbrich, Entwicklung eines ressourcenoptimierten Software-Stacks für eingebettete Systeme zur Anbindung eines Trusted Platform Modules (TPM). Lemgo: Technische Hochschule Ostwestfalen-Lippe, 2012.","ufg":"Ulbrich, Hendrik (2012): Entwicklung eines ressourcenoptimierten Software-Stacks für eingebettete Systeme zur Anbindung eines Trusted Platform Modules (TPM), Lemgo.","mla":"Ulbrich, Hendrik. Entwicklung Eines Ressourcenoptimierten Software-Stacks Für Eingebettete Systeme Zur Anbindung Eines Trusted Platform Modules (TPM). Technische Hochschule Ostwestfalen-Lippe, 2012.","havard":"H. Ulbrich, Entwicklung eines ressourcenoptimierten Software-Stacks für eingebettete Systeme zur Anbindung eines Trusted Platform Modules (TPM), Technische Hochschule Ostwestfalen-Lippe, Lemgo, 2012.","bjps":"Ulbrich H (2012) Entwicklung Eines Ressourcenoptimierten Software-Stacks Für Eingebettete Systeme Zur Anbindung Eines Trusted Platform Modules (TPM). Lemgo: Technische Hochschule Ostwestfalen-Lippe.","van":"Ulbrich H. Entwicklung eines ressourcenoptimierten Software-Stacks für eingebettete Systeme zur Anbindung eines Trusted Platform Modules (TPM). Lemgo: Technische Hochschule Ostwestfalen-Lippe; 2012.","ama":"Ulbrich H. Entwicklung Eines Ressourcenoptimierten Software-Stacks Für Eingebettete Systeme Zur Anbindung Eines Trusted Platform Modules (TPM). Lemgo: Technische Hochschule Ostwestfalen-Lippe; 2012."},"_id":"8319","language":[{"iso":"eng"}],"place":"Lemgo","type":"bachelor_thesis","date_created":"2022-05-30T15:59:26Z","date_updated":"2023-03-15T13:50:14Z","user_id":"10982"},{"department":[{"_id":"DEP4009"},{"_id":"DEP4018"},{"_id":"DEP4023"}],"year":2012,"author":[{"last_name":"Dammann","first_name":"Anna","full_name":"Dammann, Anna"},{"id":"13329","first_name":"Knut","full_name":"Schwarzer, Knut","last_name":"Schwarzer"},{"first_name":"T.","full_name":"Vullriede, T.","last_name":"Vullriede"},{"first_name":"Ulrich","full_name":"Müller, Ulrich","id":"12119","last_name":"Müller"},{"first_name":"Jan","id":"13209","last_name":"Schneider","full_name":"Schneider, Jan"}],"main_file_link":[{"open_access":"1","url":"https://www.researchgate.net/publication/286880751_Determination_of_the_Kinetic_parameters_of_a_time-temperature_integrator_for_the_flash_pasteurization"}],"issue":"9/10","page":"134 - 139","status":"public","publisher":"Carl","title":"Determination of the Kinetic Parameters of a Time-Temperature Integrator for the Flash Pasteurization","publication_status":"published","citation":{"din1505-2-1":"Dammann, Anna ; Schwarzer, Knut ; Vullriede, T. ; Müller, Ulrich ; Schneider, Jan: Determination of the Kinetic Parameters of a Time-Temperature Integrator for the Flash Pasteurization. In: Brewing science Bd. 65, Carl (2012), Nr. 9/10, S. 134–139","chicago-de":"Dammann, Anna, Knut Schwarzer, T. Vullriede, Ulrich Müller und Jan Schneider. 2012. Determination of the Kinetic Parameters of a Time-Temperature Integrator for the Flash Pasteurization. Brewing science 65, Nr. 9/10: 134–139.","short":"A. Dammann, K. Schwarzer, T. Vullriede, U. Müller, J. Schneider, Brewing Science 65 (2012) 134–139.","bjps":"Dammann A et al. (2012) Determination of the Kinetic Parameters of a Time-Temperature Integrator for the Flash Pasteurization. Brewing science 65, 134–139.","havard":"A. Dammann, K. Schwarzer, T. Vullriede, U. Müller, J. Schneider, Determination of the Kinetic Parameters of a Time-Temperature Integrator for the Flash Pasteurization, Brewing Science. 65 (2012) 134–139.","mla":"Dammann, Anna, et al. “Determination of the Kinetic Parameters of a Time-Temperature Integrator for the Flash Pasteurization.” Brewing Science, vol. 65, no. 9/10, Carl, 2012, pp. 134–39.","ufg":"Dammann, Anna et. al. (2012): Determination of the Kinetic Parameters of a Time-Temperature Integrator for the Flash Pasteurization, in: Brewing science 65 (9/10), S. 134–139.","van":"Dammann A, Schwarzer K, Vullriede T, Müller U, Schneider J. Determination of the Kinetic Parameters of a Time-Temperature Integrator for the Flash Pasteurization. Brewing science. 2012;65(9/10):134–9.","chicago":"Dammann, Anna, Knut Schwarzer, T. Vullriede, Ulrich Müller, and Jan Schneider. “Determination of the Kinetic Parameters of a Time-Temperature Integrator for the Flash Pasteurization.” Brewing Science 65, no. 9/10 (2012): 134–39.","apa":"Dammann, A., Schwarzer, K., Vullriede, T., Müller, U., & Schneider, J. (2012). Determination of the Kinetic Parameters of a Time-Temperature Integrator for the Flash Pasteurization. Brewing Science, 65(9/10), 134–139.","ama":"Dammann A, Schwarzer K, Vullriede T, Müller U, Schneider J. Determination of the Kinetic Parameters of a Time-Temperature Integrator for the Flash Pasteurization. Brewing science. 2012;65(9/10):134-139.","ieee":"A. Dammann, K. Schwarzer, T. Vullriede, U. Müller, and J. Schneider, “Determination of the Kinetic Parameters of a Time-Temperature Integrator for the Flash Pasteurization,” Brewing science, vol. 65, no. 9/10, pp. 134–139, 2012."},"volume":65,"oa":"1","language":[{"iso":"eng"}],"_id":"2750","type":"journal_article","date_created":"2020-06-02T10:29:22Z","publication_identifier":{"eissn":["1613-2041"]},"publication":"Brewing science","date_updated":"2023-03-15T13:49:42Z","user_id":"15514","intvolume":" 65"},{"language":[{"iso":"eng"}],"_id":"5605","type":"conference","date_created":"2021-04-19T09:41:36Z","date_updated":"2023-03-15T13:50:00Z","user_id":"10982","department":[{"_id":"DEP5000"},{"_id":"DEP5023"}],"author":[{"first_name":"Jan-Christopher","full_name":"Brand, Jan-Christopher","last_name":"Brand"},{"first_name":"Stefan","full_name":"Heiss, Stefan","id":"1031","last_name":"Heiss"}],"year":2012,"status":"public","publisher":"Kommunikation in der Automation (KommA)","title":"Schwachstellen und Robustheitstests in der Automatisierungstechnik.","citation":{"ieee":"J.-C. Brand and S. Heiss, “Schwachstellen und Robustheitstests in der Automatisierungstechnik.,” 2012.","ama":"Brand J-C, Heiss S. Schwachstellen und Robustheitstests in der Automatisierungstechnik. In: Kommunikation in der Automation (KommA); 2012.","chicago-de":"Brand, Jan-Christopher und Stefan Heiss. 2012. Schwachstellen und Robustheitstests in der Automatisierungstechnik. In: . Kommunikation in der Automation (KommA).","din1505-2-1":"Brand, Jan-Christopher ; Heiss, Stefan: Schwachstellen und Robustheitstests in der Automatisierungstechnik. In: : Kommunikation in der Automation (KommA), 2012","short":"J.-C. Brand, S. Heiss, in: Kommunikation in der Automation (KommA), 2012.","chicago":"Brand, Jan-Christopher, and Stefan Heiss. “Schwachstellen Und Robustheitstests in Der Automatisierungstechnik.” Kommunikation in der Automation (KommA), 2012.","apa":"Brand, J.-C., & Heiss, S. (2012). Schwachstellen und Robustheitstests in der Automatisierungstechnik. Kommunikation in der Automation (KommA).","mla":"Brand, Jan-Christopher, and Stefan Heiss. Schwachstellen Und Robustheitstests in Der Automatisierungstechnik. Kommunikation in der Automation (KommA), 2012.","bjps":"Brand J-C and Heiss S (2012) Schwachstellen Und Robustheitstests in Der Automatisierungstechnik. Kommunikation in der Automation (KommA).","havard":"J.-C. Brand, S. Heiss, Schwachstellen und Robustheitstests in der Automatisierungstechnik., in: Kommunikation in der Automation (KommA), 2012.","ufg":"Brand, Jan-Christopher/Heiss, Stefan (2012): Schwachstellen und Robustheitstests in der Automatisierungstechnik., in: .","van":"Brand J-C, Heiss S. Schwachstellen und Robustheitstests in der Automatisierungstechnik. In Kommunikation in der Automation (KommA); 2012."}},{"department":[{"_id":"DEP5000"},{"_id":"DEP5023"}],"author":[{"full_name":"Hausmann, Stefan","first_name":"Stefan","last_name":"Hausmann"},{"id":"1031","last_name":"Heiss","full_name":"Heiss, Stefan","first_name":"Stefan"}],"year":2012,"status":"public","title":"Public Key Infrastrukturen für die Automatisierungstechnik.","citation":{"chicago":"Hausmann, Stefan, and Stefan Heiss. “Public Key Infrastrukturen Für Die Automatisierungstechnik.” In Kommunikation in Der Automation (KommA), 2012.","apa":"Hausmann, S., & Heiss, S. (2012). Public Key Infrastrukturen für die Automatisierungstechnik. In Kommunikation in der Automation (KommA).","ieee":"S. Hausmann and S. Heiss, “Public Key Infrastrukturen für die Automatisierungstechnik.,” in Kommunikation in der Automation (KommA), 2012.","ufg":"Hausmann, Stefan/Heiss, Stefan (2012): Public Key Infrastrukturen für die Automatisierungstechnik., in: Kommunikation in der Automation (KommA).","havard":"S. Hausmann, S. Heiss, Public Key Infrastrukturen für die Automatisierungstechnik., in: Kommunikation in Der Automation (KommA), 2012.","mla":"Hausmann, Stefan, and Stefan Heiss. “Public Key Infrastrukturen Für Die Automatisierungstechnik.” Kommunikation in Der Automation (KommA), 2012.","bjps":"Hausmann S and Heiss S (2012) Public Key Infrastrukturen Für Die Automatisierungstechnik. Kommunikation in Der Automation (KommA).","van":"Hausmann S, Heiss S. Public Key Infrastrukturen für die Automatisierungstechnik. In: Kommunikation in der Automation (KommA). 2012.","ama":"Hausmann S, Heiss S. Public Key Infrastrukturen für die Automatisierungstechnik. In: Kommunikation in Der Automation (KommA). ; 2012.","din1505-2-1":"Hausmann, Stefan ; Heiss, Stefan: Public Key Infrastrukturen für die Automatisierungstechnik. In: Kommunikation in der Automation (KommA), 2012","chicago-de":"Hausmann, Stefan und Stefan Heiss. 2012. Public Key Infrastrukturen für die Automatisierungstechnik. In: Kommunikation in der Automation (KommA).","short":"S. Hausmann, S. Heiss, in: Kommunikation in Der Automation (KommA), 2012."},"_id":"5606","language":[{"iso":"eng"}],"date_created":"2021-04-19T09:42:53Z","type":"conference","publication":"Kommunikation in der Automation (KommA)","date_updated":"2023-03-15T13:50:00Z","user_id":"10982"},{"series_title":"Lemgoer Schriftenreihe zur industriellen Informationstechnik","title":"SKAT - Sichere Kommunikationsnetze (VPN) in der Automatisierungstechnik.","citation":{"ieee":"S. Hausmann, J.-C. Brand, A. Miske, and S. Heiss, SKAT - Sichere Kommunikationsnetze (VPN) in der Automatisierungstechnik. 2012.","ama":"Hausmann S, Brand J-C, Miske A, Heiss S. SKAT - Sichere Kommunikationsnetze (VPN) in Der Automatisierungstechnik.; 2012.","chicago":"Hausmann, Stefan, Jan-Christopher Brand, Alexander Miske, and Stefan Heiss. SKAT - Sichere Kommunikationsnetze (VPN) in Der Automatisierungstechnik. Lemgoer Schriftenreihe Zur Industriellen Informationstechnik, 2012.","apa":"Hausmann, S., Brand, J.-C., Miske, A., & Heiss, S. (2012). SKAT - Sichere Kommunikationsnetze (VPN) in der Automatisierungstechnik.","ufg":"Hausmann, Stefan et. al. (2012): SKAT - Sichere Kommunikationsnetze (VPN) in der Automatisierungstechnik. (=Lemgoer Schriftenreihe zur industriellen Informationstechnik).","mla":"Hausmann, Stefan, et al. SKAT - Sichere Kommunikationsnetze (VPN) in Der Automatisierungstechnik. 2012.","havard":"S. Hausmann, J.-C. Brand, A. Miske, S. Heiss, SKAT - Sichere Kommunikationsnetze (VPN) in der Automatisierungstechnik., 2012.","bjps":"Hausmann S et al. (2012) SKAT - Sichere Kommunikationsnetze (VPN) in Der Automatisierungstechnik. .","van":"Hausmann S, Brand J-C, Miske A, Heiss S. SKAT - Sichere Kommunikationsnetze (VPN) in der Automatisierungstechnik. 2012. (Lemgoer Schriftenreihe zur industriellen Informationstechnik).","din1505-2-1":"Hausmann, Stefan ; Brand, Jan-Christopher ; Miske, Alexander ; Heiss, Stefan: SKAT - Sichere Kommunikationsnetze (VPN) in der Automatisierungstechnik., Lemgoer Schriftenreihe zur industriellen Informationstechnik, 2012","chicago-de":"Hausmann, Stefan, Jan-Christopher Brand, Alexander Miske und Stefan Heiss. 2012. SKAT - Sichere Kommunikationsnetze (VPN) in der Automatisierungstechnik. Lemgoer Schriftenreihe zur industriellen Informationstechnik.","short":"S. Hausmann, J.-C. Brand, A. Miske, S. Heiss, SKAT - Sichere Kommunikationsnetze (VPN) in Der Automatisierungstechnik., 2012."},"department":[{"_id":"DEP5000"},{"_id":"DEP5023"}],"author":[{"last_name":"Hausmann","full_name":"Hausmann, Stefan","first_name":"Stefan"},{"full_name":"Brand, Jan-Christopher","last_name":"Brand","first_name":"Jan-Christopher"},{"last_name":"Miske","first_name":"Alexander","full_name":"Miske, Alexander"},{"full_name":"Heiss, Stefan","first_name":"Stefan","last_name":"Heiss","id":"1031"}],"year":2012,"status":"public","date_created":"2021-04-19T09:44:56Z","type":"book","publication_identifier":{"issn":[" 1869-2087"]},"date_updated":"2023-03-15T13:50:00Z","user_id":"10982","language":[{"iso":"eng"}],"_id":"5607"},{"language":[{"iso":"eng"}],"_id":"5608","user_id":"10982","date_updated":"2023-03-15T13:50:00Z","publication":"VDI Kongress AUTOMATION","date_created":"2021-04-19T09:46:19Z","type":"conference","status":"public","author":[{"full_name":"Runde, Markus","first_name":"Markus","last_name":"Runde"},{"last_name":"Hausmann","first_name":"Stefan","full_name":"Hausmann, Stefan"},{"full_name":"Niemann, Karl-Heinz","last_name":"Niemann","first_name":"Karl-Heinz"},{"first_name":"Stefan","full_name":"Heiss, Stefan","last_name":"Heiss","id":"1031"}],"year":2012,"department":[{"_id":"DEP5000"},{"_id":"DEP5023"}],"citation":{"apa":"Runde, M., Hausmann, S., Niemann, K.-H., & Heiss, S. (2012). Anwendung komponentenbezogener IT-Sicherheitsmaßnahmen in Automatisierungsnetzwerken. In VDI Kongress AUTOMATION.","ieee":"M. Runde, S. Hausmann, K.-H. Niemann, and S. Heiss, “ Anwendung komponentenbezogener IT-Sicherheitsmaßnahmen in Automatisierungsnetzwerken.,” in VDI Kongress AUTOMATION, 2012.","chicago":"Runde, Markus, Stefan Hausmann, Karl-Heinz Niemann, and Stefan Heiss. “ Anwendung Komponentenbezogener IT-Sicherheitsmaßnahmen in Automatisierungsnetzwerken.” In VDI Kongress AUTOMATION, 2012.","van":"Runde M, Hausmann S, Niemann K-H, Heiss S. Anwendung komponentenbezogener IT-Sicherheitsmaßnahmen in Automatisierungsnetzwerken. In: VDI Kongress AUTOMATION. 2012.","ama":"Runde M, Hausmann S, Niemann K-H, Heiss S. Anwendung komponentenbezogener IT-Sicherheitsmaßnahmen in Automatisierungsnetzwerken. In: VDI Kongress AUTOMATION. ; 2012.","ufg":"Runde, Markus et. al. (2012): Anwendung komponentenbezogener IT-Sicherheitsmaßnahmen in Automatisierungsnetzwerken., in: VDI Kongress AUTOMATION.","bjps":"Runde M et al. (2012) Anwendung Komponentenbezogener IT-Sicherheitsmaßnahmen in Automatisierungsnetzwerken. VDI Kongress AUTOMATION.","havard":"M. Runde, S. Hausmann, K.-H. Niemann, S. Heiss, Anwendung komponentenbezogener IT-Sicherheitsmaßnahmen in Automatisierungsnetzwerken., in: VDI Kongress AUTOMATION, 2012.","mla":"Runde, Markus, et al. “ Anwendung Komponentenbezogener IT-Sicherheitsmaßnahmen in Automatisierungsnetzwerken.” VDI Kongress AUTOMATION, 2012.","short":"M. Runde, S. Hausmann, K.-H. Niemann, S. Heiss, in: VDI Kongress AUTOMATION, 2012.","din1505-2-1":"Runde, Markus ; Hausmann, Stefan ; Niemann, Karl-Heinz ; Heiss, Stefan: Anwendung komponentenbezogener IT-Sicherheitsmaßnahmen in Automatisierungsnetzwerken. In: VDI Kongress AUTOMATION, 2012","chicago-de":"Runde, Markus, Stefan Hausmann, Karl-Heinz Niemann und Stefan Heiss. 2012. Anwendung komponentenbezogener IT-Sicherheitsmaßnahmen in Automatisierungsnetzwerken. In: VDI Kongress AUTOMATION."},"title":" Anwendung komponentenbezogener IT-Sicherheitsmaßnahmen in Automatisierungsnetzwerken."},{"user_id":"15514","date_updated":"2023-03-15T13:50:00Z","publication":"Automatisierungstechnische Praxis","publication_identifier":{"issn":["2190-4111"]},"date_created":"2021-04-19T09:47:45Z","type":"journal_article","language":[{"iso":"eng"}],"_id":"5609","citation":{"chicago-de":"Hausmann, Stefan und Stefan Heiss. 2012. Public Key Infrastructure schließt die Schutzlücke und gewährleistet eine sichere Kommunikation. Automatisierungstechnische Praxis, Nr. 3: 30–32.","din1505-2-1":"Hausmann, Stefan ; Heiss, Stefan: Public Key Infrastructure schließt die Schutzlücke und gewährleistet eine sichere Kommunikation. In: Automatisierungstechnische Praxis, Oldenbourg (2012), Nr. 3, S. 30–32","short":"S. Hausmann, S. Heiss, Automatisierungstechnische Praxis (2012) 30–32.","chicago":"Hausmann, Stefan, and Stefan Heiss. “Public Key Infrastructure Schließt Die Schutzlücke Und Gewährleistet Eine Sichere Kommunikation.” Automatisierungstechnische Praxis, no. 3 (2012): 30–32.","apa":"Hausmann, S., & Heiss, S. (2012). Public Key Infrastructure schließt die Schutzlücke und gewährleistet eine sichere Kommunikation. Automatisierungstechnische Praxis, (3), 30–32.","mla":"Hausmann, Stefan, and Stefan Heiss. “Public Key Infrastructure Schließt Die Schutzlücke Und Gewährleistet Eine Sichere Kommunikation.” Automatisierungstechnische Praxis, no. 3, Oldenbourg, 2012, pp. 30–32.","bjps":"Hausmann S and Heiss S (2012) Public Key Infrastructure Schließt Die Schutzlücke Und Gewährleistet Eine Sichere Kommunikation. Automatisierungstechnische Praxis 30–32.","havard":"S. Hausmann, S. Heiss, Public Key Infrastructure schließt die Schutzlücke und gewährleistet eine sichere Kommunikation., Automatisierungstechnische Praxis. (2012) 30–32.","ufg":"Hausmann, Stefan/Heiss, Stefan (2012): Public Key Infrastructure schließt die Schutzlücke und gewährleistet eine sichere Kommunikation., in: Automatisierungstechnische Praxis (3), S. 30–32.","van":"Hausmann S, Heiss S. Public Key Infrastructure schließt die Schutzlücke und gewährleistet eine sichere Kommunikation. Automatisierungstechnische Praxis. 2012;(3):30–2.","ieee":"S. Hausmann and S. Heiss, “Public Key Infrastructure schließt die Schutzlücke und gewährleistet eine sichere Kommunikation.,” Automatisierungstechnische Praxis, no. 3, pp. 30–32, 2012.","ama":"Hausmann S, Heiss S. Public Key Infrastructure schließt die Schutzlücke und gewährleistet eine sichere Kommunikation. Automatisierungstechnische Praxis. 2012;(3):30-32."},"publication_status":"published","title":"Public Key Infrastructure schließt die Schutzlücke und gewährleistet eine sichere Kommunikation.","status":"public","page":"30-32","publisher":"Oldenbourg","author":[{"full_name":"Hausmann, Stefan","last_name":"Hausmann","first_name":"Stefan"},{"full_name":"Heiss, Stefan","first_name":"Stefan","id":"1031","last_name":"Heiss"}],"year":2012,"department":[{"_id":"DEP5000"},{"_id":"DEP5023"},{"_id":"DEP5025"}],"issue":"3"},{"status":"public","year":"2012","author":[{"orcid":"0000-0001-6401-8873","full_name":"Schneider, Jan","first_name":"Jan","id":"13209","last_name":"Schneider"},{"first_name":"Anna","last_name":"Dammann_","id":"43899","full_name":"Dammann_, Anna"},{"id":"13329","first_name":"Knut","full_name":"Schwarzer, Knut","last_name":"Schwarzer"},{"id":"12119","last_name":"Müller","first_name":"Ulrich","full_name":"Müller, Ulrich"}],"department":[{"_id":"DEP4023"},{"_id":"DEP4009"},{"_id":"DEP4018"}],"conference":{"name":"International Spring Meeting VLB","location":"Siegen","end_date":"2012-03-07","start_date":"2012-03-07"},"citation":{"apa":"Schneider, J., Dammann_, A., Schwarzer, K., & Müller, U. (2012). The Way to gentle pasteurisation of beer and beverages. International Spring Meeting VLB, Siegen.","chicago":"Schneider, Jan, Anna Dammann_, Knut Schwarzer, and Ulrich Müller. “The Way to Gentle Pasteurisation of Beer and Beverages,” 2012.","van":"Schneider J, Dammann_ A, Schwarzer K, Müller U. The Way to gentle pasteurisation of beer and beverages. In 2012.","havard":"J. Schneider, A. Dammann_, K. Schwarzer, U. Müller, The Way to gentle pasteurisation of beer and beverages, in: 2012.","bjps":"Schneider J et al. (2012) The Way to Gentle Pasteurisation of Beer and Beverages.","mla":"Schneider, Jan, et al. The Way to Gentle Pasteurisation of Beer and Beverages. 2012.","ufg":"Schneider, Jan u. a.: The Way to gentle pasteurisation of beer and beverages, in: o. Hg.: o. O. 2012.","short":"J. Schneider, A. Dammann_, K. Schwarzer, U. Müller, in: 2012.","chicago-de":"Schneider, Jan, Anna Dammann_, Knut Schwarzer und Ulrich Müller. 2012. The Way to gentle pasteurisation of beer and beverages. In: .","din1505-2-1":"Schneider, Jan ; Dammann_, Anna ; Schwarzer, Knut ; Müller, Ulrich: The Way to gentle pasteurisation of beer and beverages. In: , 2012","ieee":"J. Schneider, A. Dammann_, K. Schwarzer, and U. Müller, “The Way to gentle pasteurisation of beer and beverages,” presented at the International Spring Meeting VLB, Siegen, 2012.","ama":"Schneider J, Dammann_ A, Schwarzer K, Müller U. The Way to gentle pasteurisation of beer and beverages. In: ; 2012."},"title":"The Way to gentle pasteurisation of beer and beverages","language":[{"iso":"eng"}],"_id":"6172","user_id":"83779","date_updated":"2024-05-23T11:16:19Z","date_created":"2021-09-07T08:51:23Z","type":"conference"},{"date_created":"2021-09-07T08:54:59Z","type":"conference","user_id":"45673","date_updated":"2023-03-15T13:50:04Z","language":[{"iso":"eng"}],"_id":"6173","title":"Untersuchungen zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trocknungsgutes","citation":{"short":"R. Pliske, U. Müller, R. Kohlus, in: 2012.","chicago-de":"Pliske, Roland, Ulrich Müller und R. Kohlus. 2012. Untersuchungen zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trocknungsgutes. In: .","din1505-2-1":"Pliske, Roland ; Müller, Ulrich ; Kohlus, R.: Untersuchungen zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trocknungsgutes. In: , 2012","apa":"Pliske, R., Müller, U., & Kohlus, R. (2012). Untersuchungen zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trocknungsgutes. Presented at the ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik, Stuttgart Hohenheim.","ieee":"R. Pliske, U. Müller, and R. Kohlus, “Untersuchungen zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trocknungsgutes,” presented at the ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik, Stuttgart Hohenheim, 2012.","chicago":"Pliske, Roland, Ulrich Müller, and R. Kohlus. “Untersuchungen Zur Steigerung Der Geschwindigkeit Der Gefriertrocknung Durch Bewegung Des Trocknungsgutes,” 2012.","van":"Pliske R, Müller U, Kohlus R. Untersuchungen zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trocknungsgutes. In 2012.","ama":"Pliske R, Müller U, Kohlus R. Untersuchungen zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trocknungsgutes. In: ; 2012.","ufg":"Pliske, Roland et. al. (2012): Untersuchungen zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trocknungsgutes, in: .","havard":"R. Pliske, U. Müller, R. Kohlus, Untersuchungen zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trocknungsgutes, in: 2012.","bjps":"Pliske R, Müller U and Kohlus R (2012) Untersuchungen Zur Steigerung Der Geschwindigkeit Der Gefriertrocknung Durch Bewegung Des Trocknungsgutes.","mla":"Pliske, Roland, et al. Untersuchungen Zur Steigerung Der Geschwindigkeit Der Gefriertrocknung Durch Bewegung Des Trocknungsgutes. 2012."},"author":[{"id":"12864","full_name":"Pliske, Roland","first_name":"Roland","last_name":"Pliske"},{"last_name":"Müller","id":"12119","full_name":"Müller, Ulrich","first_name":"Ulrich"},{"full_name":"Kohlus, R.","last_name":"Kohlus","first_name":"R."}],"year":2012,"conference":{"end_date":"2012-03-21","start_date":"2012-03-19","name":"ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik","location":"Stuttgart Hohenheim"},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"status":"public"},{"language":[{"iso":"eng"}],"_id":"6174","user_id":"83779","date_updated":"2024-05-23T11:16:52Z","type":"conference","date_created":"2021-09-07T09:00:33Z","status":"public","year":"2012","author":[{"full_name":"Bilge, D.","first_name":"D.","last_name":"Bilge"},{"last_name":"Dammann_","first_name":"Anna","full_name":"Dammann_, Anna","id":"43899"},{"first_name":"Knut","last_name":"Schwarzer","full_name":"Schwarzer, Knut","id":"13329"},{"first_name":"Ulrich","last_name":"Müller","full_name":"Müller, Ulrich","id":"12119"},{"last_name":"Schneider","first_name":"Jan","full_name":"Schneider, Jan","id":"13209","orcid":"0000-0001-6401-8873"},{"first_name":"H.","full_name":"Woest, H.","last_name":"Woest"}],"conference":{"end_date":"2012-06-21","start_date":"2012-06-18","location":"Basilien","name":"3rd Iberoamerican Symposium Brewing and Filling Technology"},"department":[{"_id":"DEP4009"},{"_id":"DEP4023"},{"_id":"DEP4018"}],"citation":{"ieee":"D. Bilge, A. Dammann_, K. Schwarzer, U. Müller, J. Schneider, and H. Woest, “Minimal Processing - a Way to a Gentle Pasteurization of Beer and Beverages,” presented at the 3rd Iberoamerican Symposium Brewing and Filling Technology, Basilien, 2012.","ama":"Bilge D, Dammann_ A, Schwarzer K, Müller U, Schneider J, Woest H. Minimal Processing - a Way to a Gentle Pasteurization of Beer and Beverages. In: ; 2012.","short":"D. Bilge, A. Dammann_, K. Schwarzer, U. Müller, J. Schneider, H. Woest, in: 2012.","din1505-2-1":"Bilge, D. ; Dammann_, Anna ; Schwarzer, Knut ; Müller, Ulrich ; Schneider, Jan ; Woest, H.: Minimal Processing - a Way to a Gentle Pasteurization of Beer and Beverages. In: , 2012","chicago-de":"Bilge, D., Anna Dammann_, Knut Schwarzer, Ulrich Müller, Jan Schneider und H. Woest. 2012. Minimal Processing - a Way to a Gentle Pasteurization of Beer and Beverages. In: .","apa":"Bilge, D., Dammann_, A., Schwarzer, K., Müller, U., Schneider, J., & Woest, H. (2012). Minimal Processing - a Way to a Gentle Pasteurization of Beer and Beverages. 3rd Iberoamerican Symposium Brewing and Filling Technology, Basilien.","chicago":"Bilge, D., Anna Dammann_, Knut Schwarzer, Ulrich Müller, Jan Schneider, and H. Woest. “Minimal Processing - a Way to a Gentle Pasteurization of Beer and Beverages,” 2012.","van":"Bilge D, Dammann_ A, Schwarzer K, Müller U, Schneider J, Woest H. Minimal Processing - a Way to a Gentle Pasteurization of Beer and Beverages. In 2012.","ufg":"Bilge, D. u. a.: Minimal Processing - a Way to a Gentle Pasteurization of Beer and Beverages, in: o. Hg.: o. O. 2012.","bjps":"Bilge D et al. (2012) Minimal Processing - a Way to a Gentle Pasteurization of Beer and Beverages.","havard":"D. Bilge, A. Dammann_, K. Schwarzer, U. Müller, J. Schneider, H. Woest, Minimal Processing - a Way to a Gentle Pasteurization of Beer and Beverages, in: 2012.","mla":"Bilge, D., et al. Minimal Processing - a Way to a Gentle Pasteurization of Beer and Beverages. 2012."},"title":"Minimal Processing - a Way to a Gentle Pasteurization of Beer and Beverages"},{"date_created":"2021-09-07T09:07:38Z","type":"conference","date_updated":"2024-05-23T11:17:25Z","user_id":"83779","_id":"6176","language":[{"iso":"eng"}],"title":"Bestimmung des Einflusses der Zeit- und Temperaturverteilung auf die Kurzzeiterhitzung von Getränken am Beispiel von Bier","citation":{"ama":"Dammann_ A, Schwarzer K, Müller U, Schneider J. Bestimmung des Einflusses der Zeit- und Temperaturverteilung auf die Kurzzeiterhitzung von Getränken am Beispiel von Bier. In: ; 2012.","ieee":"A. Dammann_, K. Schwarzer, U. Müller, and J. Schneider, “Bestimmung des Einflusses der Zeit- und Temperaturverteilung auf die Kurzzeiterhitzung von Getränken am Beispiel von Bier,” presented at the GDL-Kongress Lebensmitteltechnologie , Dresden, 2012.","short":"A. Dammann_, K. Schwarzer, U. Müller, J. Schneider, in: 2012.","din1505-2-1":"Dammann_, Anna ; Schwarzer, Knut ; Müller, Ulrich ; Schneider, Jan: Bestimmung des Einflusses der Zeit- und Temperaturverteilung auf die Kurzzeiterhitzung von Getränken am Beispiel von Bier. In: , 2012","chicago-de":"Dammann_, Anna, Knut Schwarzer, Ulrich Müller und Jan Schneider. 2012. Bestimmung des Einflusses der Zeit- und Temperaturverteilung auf die Kurzzeiterhitzung von Getränken am Beispiel von Bier. In: .","van":"Dammann_ A, Schwarzer K, Müller U, Schneider J. Bestimmung des Einflusses der Zeit- und Temperaturverteilung auf die Kurzzeiterhitzung von Getränken am Beispiel von Bier. In 2012.","bjps":"Dammann_ A et al. (2012) Bestimmung Des Einflusses Der Zeit- Und Temperaturverteilung Auf Die Kurzzeiterhitzung von Getränken Am Beispiel von Bier.","havard":"A. Dammann_, K. Schwarzer, U. Müller, J. Schneider, Bestimmung des Einflusses der Zeit- und Temperaturverteilung auf die Kurzzeiterhitzung von Getränken am Beispiel von Bier, in: 2012.","mla":"Dammann_, Anna, et al. Bestimmung Des Einflusses Der Zeit- Und Temperaturverteilung Auf Die Kurzzeiterhitzung von Getränken Am Beispiel von Bier. 2012.","ufg":"Dammann_, Anna u. a.: Bestimmung des Einflusses der Zeit- und Temperaturverteilung auf die Kurzzeiterhitzung von Getränken am Beispiel von Bier, in: o. Hg.: o. O. 2012.","apa":"Dammann_, A., Schwarzer, K., Müller, U., & Schneider, J. (2012). Bestimmung des Einflusses der Zeit- und Temperaturverteilung auf die Kurzzeiterhitzung von Getränken am Beispiel von Bier. GDL-Kongress Lebensmitteltechnologie , Dresden.","chicago":"Dammann_, Anna, Knut Schwarzer, Ulrich Müller, and Jan Schneider. “Bestimmung Des Einflusses Der Zeit- Und Temperaturverteilung Auf Die Kurzzeiterhitzung von Getränken Am Beispiel von Bier,” 2012."},"conference":{"end_date":"2012-09-29","start_date":"2012-09-27","name":"GDL-Kongress Lebensmitteltechnologie ","location":"Dresden"},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"},{"_id":"DEP4018"}],"author":[{"first_name":"Anna","full_name":"Dammann_, Anna","id":"43899","last_name":"Dammann_"},{"last_name":"Schwarzer","first_name":"Knut","id":"13329","full_name":"Schwarzer, Knut"},{"full_name":"Müller, Ulrich","first_name":"Ulrich","last_name":"Müller","id":"12119"},{"orcid":"0000-0001-6401-8873","full_name":"Schneider, Jan","id":"13209","first_name":"Jan","last_name":"Schneider"}],"year":"2012","status":"public"},{"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"conference":{"end_date":"2012-11-22","start_date":"2012-11-22","location":"Lemgo","name":"„Homogenisier- und Emulgiertechnologie für die Lebensmittelindustrie“ des Institut für Lebensmitteltechnologie.NRW und der Food-Processing Initiative e.V."},"author":[{"last_name":"Müller","first_name":"Ulrich","id":"12119","full_name":"Müller, Ulrich"}],"year":2012,"status":"public","title":"Homogenisier- und Emulgiertechnologie – ein kleiner Überblick","citation":{"short":"U. Müller, in: 2012.","din1505-2-1":"Müller, Ulrich: Homogenisier- und Emulgiertechnologie – ein kleiner Überblick. In: , 2012","chicago-de":"Müller, Ulrich. 2012. Homogenisier- und Emulgiertechnologie – ein kleiner Überblick. In: .","apa":"Müller, U. (2012). Homogenisier- und Emulgiertechnologie – ein kleiner Überblick. Presented at the „Homogenisier- und Emulgiertechnologie für die Lebensmittelindustrie“ des Institut für Lebensmitteltechnologie.NRW und der Food-Processing Initiative e.V., Lemgo.","ieee":"U. Müller, “Homogenisier- und Emulgiertechnologie – ein kleiner Überblick,” presented at the „Homogenisier- und Emulgiertechnologie für die Lebensmittelindustrie“ des Institut für Lebensmitteltechnologie.NRW und der Food-Processing Initiative e.V., Lemgo, 2012.","chicago":"Müller, Ulrich. “Homogenisier- Und Emulgiertechnologie – Ein Kleiner Überblick,” 2012.","van":"Müller U. Homogenisier- und Emulgiertechnologie – ein kleiner Überblick. In 2012.","ama":"Müller U. Homogenisier- und Emulgiertechnologie – ein kleiner Überblick. In: ; 2012.","ufg":"Müller, Ulrich (2012): Homogenisier- und Emulgiertechnologie – ein kleiner Überblick, in: .","mla":"Müller, Ulrich. Homogenisier- Und Emulgiertechnologie – Ein Kleiner Überblick. 2012.","havard":"U. Müller, Homogenisier- und Emulgiertechnologie – ein kleiner Überblick, in: 2012.","bjps":"Müller U (2012) Homogenisier- Und Emulgiertechnologie – Ein Kleiner Überblick."},"_id":"6177","language":[{"iso":"eng"}],"type":"conference","date_created":"2021-09-07T09:13:49Z","date_updated":"2023-03-15T13:50:04Z","user_id":"45673"},{"type":"conference","date_created":"2021-09-07T09:17:24Z","date_updated":"2024-05-24T06:09:17Z","user_id":"83779","language":[{"iso":"eng"}],"_id":"6178","title":"Minimal Processing, a way to a gentle Pasteurization of Beer and Beverages","citation":{"ieee":"R. Folz, A. Dammann_, K. Schwarzer, U. Müller, H. Woest, and J. Schneider, “Minimal Processing, a way to a gentle Pasteurization of Beer and Beverages,” presented at the 8th VLB Seminar for the Brewing Industry, Russia, 2012.","ama":"Folz R, Dammann_ A, Schwarzer K, Müller U, Woest H, Schneider J. Minimal Processing, a way to a gentle Pasteurization of Beer and Beverages. In: ; 2012.","short":"R. Folz, A. Dammann_, K. Schwarzer, U. Müller, H. Woest, J. Schneider, in: 2012.","chicago-de":"Folz, R., Anna Dammann_, Knut Schwarzer, Ulrich Müller, H. Woest und Jan Schneider. 2012. Minimal Processing, a way to a gentle Pasteurization of Beer and Beverages. In: .","din1505-2-1":"Folz, R. ; Dammann_, Anna ; Schwarzer, Knut ; Müller, Ulrich ; Woest, H. ; Schneider, Jan: Minimal Processing, a way to a gentle Pasteurization of Beer and Beverages. In: , 2012","apa":"Folz, R., Dammann_, A., Schwarzer, K., Müller, U., Woest, H., & Schneider, J. (2012). Minimal Processing, a way to a gentle Pasteurization of Beer and Beverages. 8th VLB Seminar for the Brewing Industry, Russia.","chicago":"Folz, R., Anna Dammann_, Knut Schwarzer, Ulrich Müller, H. Woest, and Jan Schneider. “Minimal Processing, a Way to a Gentle Pasteurization of Beer and Beverages,” 2012.","van":"Folz R, Dammann_ A, Schwarzer K, Müller U, Woest H, Schneider J. Minimal Processing, a way to a gentle Pasteurization of Beer and Beverages. In 2012.","ufg":"Folz, R. u. a.: Minimal Processing, a way to a gentle Pasteurization of Beer and Beverages, in: o. Hg.: o. O. 2012.","bjps":"Folz R et al. (2012) Minimal Processing, a Way to a Gentle Pasteurization of Beer and Beverages.","mla":"Folz, R., et al. Minimal Processing, a Way to a Gentle Pasteurization of Beer and Beverages. 2012.","havard":"R. Folz, A. Dammann_, K. Schwarzer, U. Müller, H. Woest, J. Schneider, Minimal Processing, a way to a gentle Pasteurization of Beer and Beverages, in: 2012."},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"},{"_id":"DEP4018"}],"conference":{"end_date":"2012-11-28","start_date":"2012-11-27","name":"8th VLB Seminar for the Brewing Industry","location":"Russia"},"author":[{"first_name":"R.","last_name":"Folz","full_name":"Folz, R."},{"id":"43899","first_name":"Anna","last_name":"Dammann_","full_name":"Dammann_, Anna"},{"full_name":"Schwarzer, Knut","first_name":"Knut","id":"13329","last_name":"Schwarzer"},{"last_name":"Müller","full_name":"Müller, Ulrich","id":"12119","first_name":"Ulrich"},{"first_name":"H.","last_name":"Woest","full_name":"Woest, H."},{"full_name":"Schneider, Jan","first_name":"Jan","id":"13209","last_name":"Schneider","orcid":"0000-0001-6401-8873"}],"year":"2012","status":"public"},{"place":"Nürnberg","language":[{"iso":"ger"}],"_id":"10162","oa":"1","user_id":"83781","date_updated":"2023-08-03T13:03:54Z","publication":" 13th international CAN Conference - ICC","type":"conference_editor_article","date_created":"2023-07-27T10:47:10Z","status":"public","publisher":"CiA","year":"2012","author":[{"last_name":"Wesemann","full_name":"Wesemann, Derk","first_name":"Derk","id":"1273"},{"first_name":"Stefan","last_name":"Wiite","full_name":"Wiite, Stefan"},{"full_name":"Bleikirch, Helmut","first_name":"Helmut","last_name":"Bleikirch"}],"main_file_link":[{"open_access":"1","url":"https://www.can-cia.org/fileadmin/resources/documents/proceedings/2012_wesemann.pdf"}],"conference":{"name":" 13th international CAN Conference","location":"Hambach castle, Germany"},"department":[{"_id":"DEP5000"},{"_id":"DEP5023"}],"abstract":[{"text":"Contactless interfaces are essential to different applications which rely on physical robustness and / or high modularity and movability. This work presents a solution for direct conversion of CAN signals for contactless capacitive coupling over an air gap. The coupling distances are short (in the range of less than 1 mm), but can be extended by a supporting rail which contains coupling electrodes and conductors to deliver the signals also over larger distances. A modulation scheme is implemented to maintain the functionality of dominant and recessive bit status. No additional controller is needed; the transceiver module replaces the CAN transceiver typically added to any microcontroller. ","lang":"eng"}],"citation":{"ama":"Wesemann D, Wiite S, Bleikirch H. Contactless CAN interface for rail topologies. CiA; 2012.","ieee":"D. Wesemann, S. Wiite, and H. Bleikirch, Contactless CAN interface for rail topologies. Nürnberg: CiA, 2012.","havard":"D. Wesemann, S. Wiite, H. Bleikirch, Contactless CAN interface for rail topologies, CiA, Nürnberg, 2012.","mla":"Wesemann, Derk, et al. “Contactless CAN interface for rail topologies.” 13th international CAN Conference - ICC, CiA, 2012.","bjps":"Wesemann D, Wiite S and Bleikirch H (2012) Contactless CAN interface for rail topologies. Nürnberg: CiA.","ufg":"Wesemann, Derk/Wiite, Stefan/Bleikirch, Helmut: Contactless CAN interface for rail topologies, Nürnberg 2012.","van":"Wesemann D, Wiite S, Bleikirch H. Contactless CAN interface for rail topologies. 13th international CAN Conference - ICC. Nürnberg: CiA; 2012.","chicago":"Wesemann, Derk, Stefan Wiite, and Helmut Bleikirch. Contactless CAN interface for rail topologies. 13th international CAN Conference - ICC. Nürnberg: CiA, 2012.","apa":"Wesemann, D., Wiite, S., & Bleikirch, H. (2012). Contactless CAN interface for rail topologies. In 13th international CAN Conference - ICC. 13th international CAN Conference, Hambach castle, Germany. CiA.","din1505-2-1":"Wesemann, Derk ; Wiite, Stefan ; Bleikirch, Helmut: Contactless CAN interface for rail topologies. Nürnberg : CiA, 2012","chicago-de":"Wesemann, Derk, Stefan Wiite und Helmut Bleikirch. 2012. Contactless CAN interface for rail topologies. 13th international CAN Conference - ICC. Nürnberg: CiA.","short":"D. Wesemann, S. Wiite, H. Bleikirch, Contactless CAN interface for rail topologies, CiA, Nürnberg, 2012."},"publication_status":"published","title":"Contactless CAN interface for rail topologies"},{"related_material":{"link":[{"relation":"confirmation","url":"https://www.researchgate.net/publication/266466693_Konzeption_eines_energieeffizienten_induktiven_Ubertragungssystems_fur_eine_flexible_Anzahl_sekundarer_Verbraucher_-_Contactless_Power_Bus"}]},"date_updated":"2023-08-03T11:18:29Z","user_id":"83781","type":"conference_editor_article","date_created":"2023-07-27T10:50:42Z","publication":"1. Elektronik wireless power congress","language":[{"iso":"ger"}],"place":"München","_id":"10163","publication_status":"published","citation":{"ieee":"D. Wesemann, S. Witte, J.-S. Michels, and H. Beikirch, Konzeption eines energieeffizienten induktiven Übertragungssystems für eine flexible Anzahl sekundärer Verbraucher - Contactless Power Bus. München: ZVEI, 2012.","ama":"Wesemann D, Witte S, Michels JS, Beikirch H. Konzeption eines energieeffizienten induktiven Übertragungssystems für eine flexible Anzahl sekundärer Verbraucher - Contactless Power Bus. ZVEI; 2012.","apa":"Wesemann, D., Witte, S., Michels, J.-S., & Beikirch, H. (2012). Konzeption eines energieeffizienten induktiven Übertragungssystems für eine flexible Anzahl sekundärer Verbraucher - Contactless Power Bus. In 1. Elektronik wireless power congress. ZVEI.","chicago":"Wesemann, Derk, Stefan Witte, Jan-Stefan Michels, and Helmut Beikirch. Konzeption eines energieeffizienten induktiven Übertragungssystems für eine flexible Anzahl sekundärer Verbraucher - Contactless Power Bus. 1. Elektronik wireless power congress. München: ZVEI, 2012.","van":"Wesemann D, Witte S, Michels JS, Beikirch H. Konzeption eines energieeffizienten induktiven Übertragungssystems für eine flexible Anzahl sekundärer Verbraucher - Contactless Power Bus. 1. Elektronik wireless power congress. München: ZVEI; 2012.","havard":"D. Wesemann, S. Witte, J.-S. Michels, H. Beikirch, Konzeption eines energieeffizienten induktiven Übertragungssystems für eine flexible Anzahl sekundärer Verbraucher - Contactless Power Bus, ZVEI, München, 2012.","bjps":"Wesemann D et al. (2012) Konzeption eines energieeffizienten induktiven Übertragungssystems für eine flexible Anzahl sekundärer Verbraucher - Contactless Power Bus. München: ZVEI.","mla":"Wesemann, Derk, et al. “Konzeption eines energieeffizienten induktiven Übertragungssystems für eine flexible Anzahl sekundärer Verbraucher - Contactless Power Bus.” 1. Elektronik wireless power congress, ZVEI, 2012.","ufg":"Wesemann, Derk u. a.: Konzeption eines energieeffizienten induktiven Übertragungssystems für eine flexible Anzahl sekundärer Verbraucher - Contactless Power Bus, München 2012.","short":"D. Wesemann, S. Witte, J.-S. Michels, H. Beikirch, Konzeption eines energieeffizienten induktiven Übertragungssystems für eine flexible Anzahl sekundärer Verbraucher - Contactless Power Bus, ZVEI, München, 2012.","din1505-2-1":"Wesemann, Derk ; Witte, Stefan ; Michels, Jan-Stefan ; Beikirch, Helmut: Konzeption eines energieeffizienten induktiven Übertragungssystems für eine flexible Anzahl sekundärer Verbraucher - Contactless Power Bus. München : ZVEI, 2012","chicago-de":"Wesemann, Derk, Stefan Witte, Jan-Stefan Michels und Helmut Beikirch. 2012. Konzeption eines energieeffizienten induktiven Übertragungssystems für eine flexible Anzahl sekundärer Verbraucher - Contactless Power Bus. 1. Elektronik wireless power congress. München: ZVEI."},"title":"Konzeption eines energieeffizienten induktiven Übertragungssystems für eine flexible Anzahl sekundärer Verbraucher - Contactless Power Bus","status":"public","publisher":"ZVEI","department":[{"_id":"DEP5000"},{"_id":"DEP5023"}],"author":[{"first_name":"Derk","full_name":"Wesemann, Derk","last_name":"Wesemann","id":"1273"},{"id":"1605","first_name":"Stefan","full_name":"Witte, Stefan","last_name":"Witte"},{"last_name":"Michels","first_name":"Jan-Stefan","full_name":"Michels, Jan-Stefan"},{"last_name":"Beikirch","first_name":"Helmut","full_name":"Beikirch, Helmut"}],"year":"2012"},{"publisher":"IEEE","abstract":[{"text":"Cognitive radios (CR) can sense and detect temporarily available spectral holes for an opportunistic operation to improve the spectral efficiency and coexistence of industrial radio systems. It will be of particular interest for a CR system to apply predictive modeling in order to forecast the behavior of the coexisting environment. A secondary cognitive user shall use preemptive tuning of its operating parameters following the predictive model. However, a considerable challenge is to generate an accurate model and predict efficiently in order to meet strict time related requirements of industrial applications. Such predictive modeling has already gained some attention but real-time experimental results have never been reported to the best of our knowledge. In this contribution we investigate the performance of a Markov model based CR system using simulative and experimental environments for its application in industrial systems.","lang":"eng"}],"conference":{"end_date":"2012-09-21","start_date":"2012-09-17","location":"Krakow, Poland ","name":"17th IEEE Conference on Emerging Technologies and Factory Automation"},"department":[{"_id":"DEP5000"},{"_id":"DEP5023"}],"publication_status":"published","doi":"10.1109/ETFA.2012.6489557","_id":"10164","place":"Piscataway, NJ","user_id":"83781","type":"conference_editor_article","status":"public","year":"2012","author":[{"last_name":"Ahmad","full_name":"Ahmad, Kaleem","first_name":"Kaleem"},{"last_name":"Meier","full_name":"Meier, Uwe","id":"1143","first_name":"Uwe"},{"full_name":"Witte, Stefan","last_name":"Witte","id":"1605","first_name":"Stefan"}],"citation":{"short":"K. Ahmad, U. Meier, S. Witte, Predictive Oppertunistic Spectrum Access Using Markov Models, IEEE, Piscataway, NJ, 2012.","din1505-2-1":"Ahmad, Kaleem ; Meier, Uwe ; Witte, Stefan ; Institute of Electrical and Electronics Engineers ; IEEE Industrial Electronics Society (Hrsg.): Predictive Oppertunistic Spectrum Access Using Markov Models. Piscataway, NJ : IEEE, 2012","chicago-de":"Ahmad, Kaleem, Uwe Meier und Stefan Witte. 2012. Predictive Oppertunistic Spectrum Access Using Markov Models. Hg. von Institute of Electrical and Electronics Engineers und IEEE Industrial Electronics Society. Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation (ETFA 2012). Piscataway, NJ: IEEE. doi:10.1109/ETFA.2012.6489557, .","ama":"Ahmad K, Meier U, Witte S. Predictive Oppertunistic Spectrum Access Using Markov Models. (Institute of Electrical and Electronics Engineers, IEEE Industrial Electronics Society, eds.). IEEE; 2012. doi:10.1109/ETFA.2012.6489557","van":"Ahmad K, Meier U, Witte S. Predictive Oppertunistic Spectrum Access Using Markov Models. Institute of Electrical and Electronics Engineers, IEEE Industrial Electronics Society, editors. Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation (ETFA 2012). Piscataway, NJ: IEEE; 2012.","mla":"Ahmad, Kaleem, et al. “Predictive Oppertunistic Spectrum Access Using Markov Models.” Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation (ETFA 2012), edited by Institute of Electrical and Electronics Engineers and IEEE Industrial Electronics Society, IEEE, 2012, https://doi.org/10.1109/ETFA.2012.6489557.","havard":"K. Ahmad, U. Meier, S. Witte, Predictive Oppertunistic Spectrum Access Using Markov Models, IEEE, Piscataway, NJ, 2012.","bjps":"Ahmad K, Meier U and Witte S (2012) Predictive Oppertunistic Spectrum Access Using Markov Models, Institute of Electrical and Electronics Engineers and IEEE Industrial Electronics Society (eds). Piscataway, NJ: IEEE.","ufg":"Ahmad, Kaleem/Meier, Uwe/Witte, Stefan: Predictive Oppertunistic Spectrum Access Using Markov Models, hg. von Institute of Electrical and Electronics Engineers, IEEE Industrial Electronics Society, Piscataway, NJ 2012.","ieee":"K. Ahmad, U. Meier, and S. Witte, Predictive Oppertunistic Spectrum Access Using Markov Models. Piscataway, NJ: IEEE, 2012. doi: 10.1109/ETFA.2012.6489557.","apa":"Ahmad, K., Meier, U., & Witte, S. (2012). Predictive Oppertunistic Spectrum Access Using Markov Models. In Institute of Electrical and Electronics Engineers & IEEE Industrial Electronics Society (Eds.), Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation (ETFA 2012). IEEE. https://doi.org/10.1109/ETFA.2012.6489557","chicago":"Ahmad, Kaleem, Uwe Meier, and Stefan Witte. Predictive Oppertunistic Spectrum Access Using Markov Models. Edited by Institute of Electrical and Electronics Engineers and IEEE Industrial Electronics Society. Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation (ETFA 2012). Piscataway, NJ: IEEE, 2012. https://doi.org/10.1109/ETFA.2012.6489557."},"title":"Predictive Oppertunistic Spectrum Access Using Markov Models","language":[{"iso":"eng"}],"keyword":["cognitive radio","Markov processes","radio spectrum management"],"corporate_editor":["Institute of Electrical and Electronics Engineers","IEEE Industrial Electronics Society"],"date_updated":"2023-08-03T09:05:56Z","date_created":"2023-07-27T10:53:31Z","publication_identifier":{"eisbn":["978-1-4673-4737-2"],"isbn":["978-1-4673-4735-8 "]},"publication":"Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation (ETFA 2012)"},{"citation":{"ama":"Faltinski S, Moriz N, Schetinin N, Niggemann O. AutomationML als Grundlage für einen durchgängigen Modellierung-, Simulations- und Integrationsprozess in der Anlageplanung. . In: AUTOMATION 2012. Baden Baden; 2012.","ieee":"S. Faltinski, N. Moriz, N. Schetinin, and O. Niggemann, “AutomationML als Grundlage für einen durchgängigen Modellierung-, Simulations- und Integrationsprozess in der Anlageplanung. ,” in AUTOMATION 2012, 2012.","short":"S. Faltinski, N. Moriz, N. Schetinin, O. Niggemann, in: AUTOMATION 2012, Baden Baden, 2012.","din1505-2-1":"Faltinski, Sebastian ; Moriz, Natalia ; Schetinin, Nikolai ; Niggemann, Oliver: AutomationML als Grundlage für einen durchgängigen Modellierung-, Simulations- und Integrationsprozess in der Anlageplanung. . In: AUTOMATION 2012. Baden Baden, 2012","chicago-de":"Faltinski, Sebastian, Natalia Moriz, Nikolai Schetinin und Oliver Niggemann. 2012. AutomationML als Grundlage für einen durchgängigen Modellierung-, Simulations- und Integrationsprozess in der Anlageplanung. . In: AUTOMATION 2012. Baden Baden.","van":"Faltinski S, Moriz N, Schetinin N, Niggemann O. AutomationML als Grundlage für einen durchgängigen Modellierung-, Simulations- und Integrationsprozess in der Anlageplanung. . In: AUTOMATION 2012. Baden Baden; 2012.","ufg":"Faltinski, Sebastian et. al. (2012): AutomationML als Grundlage für einen durchgängigen Modellierung-, Simulations- und Integrationsprozess in der Anlageplanung. , in: AUTOMATION 2012, Baden Baden.","havard":"S. Faltinski, N. Moriz, N. Schetinin, O. Niggemann, AutomationML als Grundlage für einen durchgängigen Modellierung-, Simulations- und Integrationsprozess in der Anlageplanung. , in: AUTOMATION 2012, Baden Baden, 2012.","bjps":"Faltinski S et al. (2012) AutomationML Als Grundlage Für Einen Durchgängigen Modellierung-, Simulations- Und Integrationsprozess in Der Anlageplanung. . AUTOMATION 2012. Baden Baden.","mla":"Faltinski, Sebastian, et al. “AutomationML Als Grundlage Für Einen Durchgängigen Modellierung-, Simulations- Und Integrationsprozess in Der Anlageplanung. .” AUTOMATION 2012, 2012.","apa":"Faltinski, S., Moriz, N., Schetinin, N., & Niggemann, O. (2012). AutomationML als Grundlage für einen durchgängigen Modellierung-, Simulations- und Integrationsprozess in der Anlageplanung. . In AUTOMATION 2012. Baden Baden.","chicago":"Faltinski, Sebastian, Natalia Moriz, Nikolai Schetinin, and Oliver Niggemann. “AutomationML Als Grundlage Für Einen Durchgängigen Modellierung-, Simulations- Und Integrationsprozess in Der Anlageplanung. .” In AUTOMATION 2012. Baden Baden, 2012."},"title":"AutomationML als Grundlage für einen durchgängigen Modellierung-, Simulations- und Integrationsprozess in der Anlageplanung. ","status":"public","author":[{"full_name":"Faltinski, Sebastian","last_name":"Faltinski","first_name":"Sebastian"},{"first_name":"Natalia","last_name":"Moriz","full_name":"Moriz, Natalia","id":"44238"},{"last_name":"Schetinin","full_name":"Schetinin, Nikolai","first_name":"Nikolai"},{"last_name":"Niggemann","first_name":"Oliver","full_name":"Niggemann, Oliver","id":"10876"}],"year":2012,"department":[{"_id":"DEP5023"}],"user_id":"68554","date_updated":"2023-03-15T13:49:55Z","publication":"AUTOMATION 2012","type":"conference","date_created":"2021-02-02T09:15:47Z","_id":"4807","place":"Baden Baden","language":[{"iso":"eng"}]},{"language":[{"iso":"eng"}],"place":"Athen, Griechenland","_id":"4808","type":"conference","date_created":"2021-02-02T09:16:51Z","publication":"2012 IEEE International Conference on Industrial Technology (ICIT)","date_updated":"2023-03-15T13:49:55Z","user_id":"68554","department":[{"_id":"DEP5023"}],"author":[{"last_name":"Faltinski","first_name":"Sebastian","full_name":"Faltinski, Sebastian"},{"first_name":"Oliver","last_name":"Niggemann","full_name":"Niggemann, Oliver","id":"10876"},{"last_name":"Moriz","full_name":"Moriz, Natalia","id":"44238","first_name":"Natalia"},{"full_name":"Mankowski, Andre","last_name":"Mankowski","id":"51482","first_name":"Andre"}],"year":2012,"status":"public","title":"AutomationML: From Data Exchange to System Planning and Simulation","citation":{"chicago":"Faltinski, Sebastian, Oliver Niggemann, Natalia Moriz, and Andre Mankowski. “AutomationML: From Data Exchange to System Planning and Simulation.” In 2012 IEEE International Conference on Industrial Technology (ICIT). Athen, Griechenland, 2012.","apa":"Faltinski, S., Niggemann, O., Moriz, N., & Mankowski, A. (2012). AutomationML: From Data Exchange to System Planning and Simulation. In 2012 IEEE International Conference on Industrial Technology (ICIT). Athen, Griechenland.","ufg":"Faltinski, Sebastian et. al. (2012): AutomationML: From Data Exchange to System Planning and Simulation, in: 2012 IEEE International Conference on Industrial Technology (ICIT), Athen, Griechenland.","mla":"Faltinski, Sebastian, et al. “AutomationML: From Data Exchange to System Planning and Simulation.” 2012 IEEE International Conference on Industrial Technology (ICIT), 2012.","bjps":"Faltinski S et al. (2012) AutomationML: From Data Exchange to System Planning and Simulation. 2012 IEEE International Conference on Industrial Technology (ICIT). Athen, Griechenland.","havard":"S. Faltinski, O. Niggemann, N. Moriz, A. Mankowski, AutomationML: From Data Exchange to System Planning and Simulation, in: 2012 IEEE International Conference on Industrial Technology (ICIT), Athen, Griechenland, 2012.","van":"Faltinski S, Niggemann O, Moriz N, Mankowski A. AutomationML: From Data Exchange to System Planning and Simulation. In: 2012 IEEE International Conference on Industrial Technology (ICIT). Athen, Griechenland; 2012.","chicago-de":"Faltinski, Sebastian, Oliver Niggemann, Natalia Moriz und Andre Mankowski. 2012. AutomationML: From Data Exchange to System Planning and Simulation. In: 2012 IEEE International Conference on Industrial Technology (ICIT). Athen, Griechenland.","din1505-2-1":"Faltinski, Sebastian ; Niggemann, Oliver ; Moriz, Natalia ; Mankowski, Andre: AutomationML: From Data Exchange to System Planning and Simulation. In: 2012 IEEE International Conference on Industrial Technology (ICIT). Athen, Griechenland, 2012","short":"S. Faltinski, O. Niggemann, N. Moriz, A. Mankowski, in: 2012 IEEE International Conference on Industrial Technology (ICIT), Athen, Griechenland, 2012.","ieee":"S. Faltinski, O. Niggemann, N. Moriz, and A. Mankowski, “AutomationML: From Data Exchange to System Planning and Simulation,” in 2012 IEEE International Conference on Industrial Technology (ICIT), 2012.","ama":"Faltinski S, Niggemann O, Moriz N, Mankowski A. AutomationML: From Data Exchange to System Planning and Simulation. In: 2012 IEEE International Conference on Industrial Technology (ICIT). Athen, Griechenland; 2012."}},{"publisher":"IEEE, Piscataway","status":"public","year":2012,"author":[{"full_name":"Gaj, Piotr","last_name":"Gaj","first_name":"Piotr"},{"first_name":"Max","last_name":"Felser","full_name":"Felser, Max"},{"id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen","last_name":"Jasperneite"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"name":"IEEE Transactions on Industrial Informatics"},"citation":{"chicago-de":"Gaj, Piotr, Max Felser und Jürgen Jasperneite. 2012. Guest Editorial - Special Section on Distributed Computer Systems in Industry. In: IEEE Transactions on Industrial Informatics. IEEE, Piscataway.","din1505-2-1":"Gaj, Piotr ; Felser, Max ; Jasperneite, Jürgen: Guest Editorial - Special Section on Distributed Computer Systems in Industry. In: IEEE Transactions on Industrial Informatics : IEEE, Piscataway, 2012","short":"P. Gaj, M. Felser, J. Jasperneite, in: IEEE Transactions on Industrial Informatics, IEEE, Piscataway, 2012.","ufg":"Gaj, Piotr et. al. (2012): Guest Editorial - Special Section on Distributed Computer Systems in Industry, in: IEEE Transactions on Industrial Informatics.","havard":"P. Gaj, M. Felser, J. Jasperneite, Guest Editorial - Special Section on Distributed Computer Systems in Industry, in: IEEE Transactions on Industrial Informatics, IEEE, Piscataway, 2012.","mla":"Gaj, Piotr, et al. “Guest Editorial - Special Section on Distributed Computer Systems in Industry.” IEEE Transactions on Industrial Informatics, IEEE, Piscataway, 2012.","bjps":"Gaj P, Felser M and Jasperneite J (2012) Guest Editorial - Special Section on Distributed Computer Systems in Industry. IEEE Transactions on Industrial Informatics. IEEE, Piscataway.","van":"Gaj P, Felser M, Jasperneite J. Guest Editorial - Special Section on Distributed Computer Systems in Industry. In: IEEE Transactions on Industrial Informatics. IEEE, Piscataway; 2012.","ama":"Gaj P, Felser M, Jasperneite J. Guest Editorial - Special Section on Distributed Computer Systems in Industry. In: IEEE Transactions on Industrial Informatics. IEEE, Piscataway; 2012.","chicago":"Gaj, Piotr, Max Felser, and Jürgen Jasperneite. “Guest Editorial - Special Section on Distributed Computer Systems in Industry.” In IEEE Transactions on Industrial Informatics. IEEE, Piscataway, 2012.","apa":"Gaj, P., Felser, M., & Jasperneite, J. (2012). Guest Editorial - Special Section on Distributed Computer Systems in Industry. In IEEE Transactions on Industrial Informatics. IEEE, Piscataway.","ieee":"P. Gaj, M. Felser, and J. Jasperneite, “Guest Editorial - Special Section on Distributed Computer Systems in Industry,” in IEEE Transactions on Industrial Informatics, 2012."},"title":"Guest Editorial - Special Section on Distributed Computer Systems in Industry","_id":"4882","language":[{"iso":"eng"}],"user_id":"45673","date_updated":"2023-03-15T13:49:56Z","publication":"IEEE Transactions on Industrial Informatics","type":"conference","date_created":"2021-02-02T13:59:54Z"},{"title":"Climate responsive façades for public buildings in tropical Climates","series_title":"Proceedings of the Sixth International Congress on Architectural Envelopes, 20-22 June, 2012, San Sebastián-Donostia, Spain","citation":{"din1505-2-1":"Kabre, Chitra ; Pottgiesser, Uta: Climate responsive façades for public buildings in tropical Climates, Proceedings of the Sixth International Congress on Architectural Envelopes, 20-22 June, 2012, San Sebastián-Donostia, Spain, 2012","chicago-de":"Kabre, Chitra und Uta Pottgiesser. 2012. Climate responsive façades for public buildings in tropical Climates. Proceedings of the Sixth International Congress on Architectural Envelopes, 20-22 June, 2012, San Sebastián-Donostia, Spain.","short":"C. Kabre, U. Pottgiesser, Climate Responsive Façades for Public Buildings in Tropical Climates, 2012.","ufg":"Kabre, Chitra/Pottgiesser, Uta (2012): Climate responsive façades for public buildings in tropical Climates (=Proceedings of the Sixth International Congress on Architectural Envelopes, 20-22 June, 2012, San Sebastián-Donostia, Spain).","havard":"C. Kabre, U. Pottgiesser, Climate responsive façades for public buildings in tropical Climates, 2012.","mla":"Kabre, Chitra, and Uta Pottgiesser. Climate Responsive Façades for Public Buildings in Tropical Climates. 2012.","bjps":"Kabre C and Pottgiesser U (2012) Climate Responsive Façades for Public Buildings in Tropical Climates. .","van":"Kabre C, Pottgiesser U. Climate responsive façades for public buildings in tropical Climates. 2012. (Proceedings of the Sixth International Congress on Architectural Envelopes, 20-22 June, 2012, San Sebastián-Donostia, Spain).","chicago":"Kabre, Chitra, and Uta Pottgiesser. Climate Responsive Façades for Public Buildings in Tropical Climates. Proceedings of the Sixth International Congress on Architectural Envelopes, 20-22 June, 2012, San Sebastián-Donostia, Spain, 2012.","apa":"Kabre, C., & Pottgiesser, U. (2012). Climate responsive façades for public buildings in tropical Climates.","ama":"Kabre C, Pottgiesser U. Climate Responsive Façades for Public Buildings in Tropical Climates.; 2012.","ieee":"C. Kabre and U. Pottgiesser, Climate responsive façades for public buildings in tropical Climates. 2012."},"publication_status":"published","year":2012,"author":[{"first_name":"Chitra","last_name":"Kabre","full_name":"Kabre, Chitra"},{"first_name":"Uta","id":"27166","last_name":"Pottgiesser","full_name":"Pottgiesser, Uta","orcid":"0000-0002-8594-3168"}],"department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"quality_controlled":"1","status":"public","date_created":"2021-03-08T14:25:33Z","type":"book","user_id":"45673","date_updated":"2023-03-15T13:49:58Z","_id":"5259","language":[{"iso":"eng"}]},{"status":"public","page":"449","year":2012,"department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"conference":{"end_date":"2012-02-07","start_date":"2012-02-06","name":"National Conference on Energy Efficient Design of Buildings","location":"Murthal"},"citation":{"ama":"Pottgiesser U, Kabre C, Sharma JP, eds. Energy Efficient Design of Building & Cities . Murthal; 2012:449.","ieee":"U. Pottgiesser, C. Kabre, and J. P. Sharma, Eds., Energy Efficient Design of Building & Cities . Murthal, 2012, p. 449.","van":"Pottgiesser U, Kabre C, Sharma JP, editors. Energy Efficient Design of Building & Cities . Murthal; 2012.","mla":"Pottgiesser, Uta, et al., editors. Energy Efficient Design of Building & Cities . 2012, p. 449.","havard":"U. Pottgiesser, C. Kabre, J.P. Sharma, eds., Energy Efficient Design of Building & Cities , Murthal, 2012.","bjps":"Pottgiesser U, Kabre C and Sharma JP (eds) (2012) Energy Efficient Design of Building & Cities . Murthal.","ufg":"Pottgiesser, Uta et. al. (Hgg.) (2012): Energy Efficient Design of Building & Cities , Murthal.","apa":"Pottgiesser, U., Kabre, C., & Sharma, J. P. (Eds.). (2012). Energy Efficient Design of Building & Cities (p. 449). Presented at the National Conference on Energy Efficient Design of Buildings, Murthal.","chicago":"Pottgiesser, Uta, Chitra Kabre, and J. P. Sharma, eds. Energy Efficient Design of Building & Cities . Murthal, 2012.","short":"U. Pottgiesser, C. Kabre, J.P. Sharma, eds., Energy Efficient Design of Building & Cities , Murthal, 2012.","din1505-2-1":"Pottgiesser, U. ; Kabre, C. ; Sharma, J. P. (Hrsg.): Energy Efficient Design of Building & Cities . Murthal, 2012","chicago-de":"Pottgiesser, Uta, Chitra Kabre und J. P. Sharma, Hrsg. 2012. Energy Efficient Design of Building & Cities . Murthal."},"publication_status":"published","title":"Energy Efficient Design of Building & Cities ","_id":"5260","place":"Murthal","language":[{"iso":"eng"}],"editor":[{"id":"27166","last_name":"Pottgiesser","full_name":"Pottgiesser, Uta","first_name":"Uta","orcid":"0000-0002-8594-3168"},{"full_name":"Kabre, Chitra","first_name":"Chitra","last_name":"Kabre"},{"last_name":"Sharma","first_name":"J. P. ","full_name":"Sharma, J. P. "}],"user_id":"45673","date_updated":"2023-03-15T13:49:58Z","publication_identifier":{"isbn":["978-93-5067-137-5 "]},"date_created":"2021-03-08T14:28:44Z","type":"conference_editor"},{"citation":{"ama":"Pottgiesser U. Monuments of industry and infrastructure as a challenge for re-use! In: Proceedings of the 12th International DOCOMOMO Conference. ; 2012.","ieee":"U. Pottgiesser, “Monuments of industry and infrastructure as a challenge for re-use!,” in Proceedings of the 12th International DOCOMOMO Conference, Helsinki, Finnland, 2012.","din1505-2-1":"Pottgiesser, Uta: Monuments of industry and infrastructure as a challenge for re-use! In: Proceedings of the 12th International DOCOMOMO Conference, 2012","chicago-de":"Pottgiesser, Uta. 2012. Monuments of industry and infrastructure as a challenge for re-use! In: Proceedings of the 12th International DOCOMOMO Conference.","short":"U. Pottgiesser, in: Proceedings of the 12th International DOCOMOMO Conference, 2012.","ufg":"Pottgiesser, Uta (2012): Monuments of industry and infrastructure as a challenge for re-use!, in: Proceedings of the 12th International DOCOMOMO Conference.","mla":"Pottgiesser, Uta. “Monuments of Industry and Infrastructure as a Challenge for Re-Use!” Proceedings of the 12th International DOCOMOMO Conference, 2012.","havard":"U. Pottgiesser, Monuments of industry and infrastructure as a challenge for re-use!, in: Proceedings of the 12th International DOCOMOMO Conference, 2012.","bjps":"Pottgiesser U (2012) Monuments of Industry and Infrastructure as a Challenge for Re-Use! Proceedings of the 12th International DOCOMOMO Conference.","van":"Pottgiesser U. Monuments of industry and infrastructure as a challenge for re-use! In: Proceedings of the 12th International DOCOMOMO Conference. 2012.","chicago":"Pottgiesser, Uta. “Monuments of Industry and Infrastructure as a Challenge for Re-Use!” In Proceedings of the 12th International DOCOMOMO Conference, 2012.","apa":"Pottgiesser, U. (2012). Monuments of industry and infrastructure as a challenge for re-use! In Proceedings of the 12th International DOCOMOMO Conference. Helsinki, Finnland."},"publication_status":"published","title":"Monuments of industry and infrastructure as a challenge for re-use!","quality_controlled":"1","status":"public","year":2012,"author":[{"orcid":"0000-0002-8594-3168","full_name":"Pottgiesser, Uta","id":"27166","first_name":"Uta","last_name":"Pottgiesser"}],"department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"conference":{"location":"Helsinki, Finnland","name":"12th International DOCOMOMO Conference"},"user_id":"45673","date_updated":"2023-03-15T13:49:58Z","publication_identifier":{"isbn":["9789529323005"]},"publication":"Proceedings of the 12th International DOCOMOMO Conference","date_created":"2021-03-08T14:31:43Z","type":"conference","_id":"5261","language":[{"iso":"eng"}]},{"title":"Bestimmung des Einflusses der Zeit- und Temperaturverteilung auf die Kurzzeiterhitzung von Getränken am Beispiel von Bier","citation":{"ieee":"K. Schwarzer, J. Schneider, B. Becker, U. Müller, and A. Dammann_, “Bestimmung des Einflusses der Zeit- und Temperaturverteilung auf die Kurzzeiterhitzung von Getränken am Beispiel von Bier,” presented at the ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik, Stuttgart-Hohenheim, 2012.","ama":"Schwarzer K, Schneider J, Becker B, Müller U, Dammann_ A. Bestimmung des Einflusses der Zeit- und Temperaturverteilung auf die Kurzzeiterhitzung von Getränken am Beispiel von Bier. In: ; 2012.","chicago-de":"Schwarzer, Knut, Jan Schneider, Barbara Becker, Ulrich Müller und Anna Dammann_. 2012. Bestimmung des Einflusses der Zeit- und Temperaturverteilung auf die Kurzzeiterhitzung von Getränken am Beispiel von Bier. In: .","din1505-2-1":"Schwarzer, Knut ; Schneider, Jan ; Becker, Barbara ; Müller, Ulrich ; Dammann_, Anna: Bestimmung des Einflusses der Zeit- und Temperaturverteilung auf die Kurzzeiterhitzung von Getränken am Beispiel von Bier. In: , 2012","short":"K. Schwarzer, J. Schneider, B. Becker, U. Müller, A. Dammann_, in: 2012.","chicago":"Schwarzer, Knut, Jan Schneider, Barbara Becker, Ulrich Müller, and Anna Dammann_. “Bestimmung des Einflusses der Zeit- und Temperaturverteilung auf die Kurzzeiterhitzung von Getränken am Beispiel von Bier,” 2012.","apa":"Schwarzer, K., Schneider, J., Becker, B., Müller, U., & Dammann_, A. (2012). Bestimmung des Einflusses der Zeit- und Temperaturverteilung auf die Kurzzeiterhitzung von Getränken am Beispiel von Bier. ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik, Stuttgart-Hohenheim.","havard":"K. Schwarzer, J. Schneider, B. Becker, U. Müller, A. Dammann_, Bestimmung des Einflusses der Zeit- und Temperaturverteilung auf die Kurzzeiterhitzung von Getränken am Beispiel von Bier, in: 2012.","bjps":"Schwarzer K et al. (2012) Bestimmung des Einflusses der Zeit- und Temperaturverteilung auf die Kurzzeiterhitzung von Getränken am Beispiel von Bier.","mla":"Schwarzer, Knut, et al. Bestimmung des Einflusses der Zeit- und Temperaturverteilung auf die Kurzzeiterhitzung von Getränken am Beispiel von Bier. 2012.","ufg":"Schwarzer, Knut u. a.: Bestimmung des Einflusses der Zeit- und Temperaturverteilung auf die Kurzzeiterhitzung von Getränken am Beispiel von Bier, in: o. Hg.: o. O. 2012.","van":"Schwarzer K, Schneider J, Becker B, Müller U, Dammann_ A. Bestimmung des Einflusses der Zeit- und Temperaturverteilung auf die Kurzzeiterhitzung von Getränken am Beispiel von Bier. In 2012."},"year":"2012","author":[{"full_name":"Schwarzer, Knut","id":"13329","last_name":"Schwarzer","first_name":"Knut"},{"orcid":"0000-0001-6401-8873","first_name":"Jan","full_name":"Schneider, Jan","id":"13209","last_name":"Schneider"},{"full_name":"Becker, Barbara","last_name":"Becker","id":"12640","first_name":"Barbara"},{"id":"12119","last_name":"Müller","full_name":"Müller, Ulrich","first_name":"Ulrich"},{"first_name":"Anna","last_name":"Dammann_","id":"43899","full_name":"Dammann_, Anna"}],"conference":{"location":"Stuttgart-Hohenheim","name":"ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik","start_date":"2012-03-19","end_date":"2012-03-21"},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"},{"_id":"DEP4018"}],"status":"public","date_created":"2021-03-30T07:16:55Z","type":"conference","user_id":"83779","date_updated":"2024-05-24T06:45:51Z","_id":"5347","language":[{"iso":"ger"}]},{"_id":"5348","language":[{"iso":"ger"}],"type":"conference","date_created":"2021-03-30T07:24:31Z","date_updated":"2024-05-24T06:46:24Z","user_id":"83779","conference":{"name":"ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik ","location":"Stuttgart - Hohenheim","start_date":"2012-03-19","end_date":"2012-03-21"},"department":[{"_id":"DEP4009"},{"_id":"DEP4023"},{"_id":"DEP4010"},{"_id":"DEP4018"}],"author":[{"first_name":"Knut","full_name":"Schwarzer, Knut","id":"13329","last_name":"Schwarzer"},{"first_name":"Jan","full_name":"Schneider, Jan","id":"13209","last_name":"Schneider","orcid":"0000-0001-6401-8873"},{"first_name":"Barbara","last_name":"Becker","id":"12640","full_name":"Becker, Barbara"},{"full_name":"Müller, Ulrich","last_name":"Müller","id":"12119","first_name":"Ulrich"}],"year":"2012","status":"public","title":"Entkeimungsauslegung mit der \"Lemgo D- and z-value Database for Food","citation":{"short":"K. Schwarzer, J. Schneider, B. Becker, U. Müller, in: 2012.","chicago-de":"Schwarzer, Knut, Jan Schneider, Barbara Becker und Ulrich Müller. 2012. Entkeimungsauslegung mit der \"Lemgo D- and z-value Database for Food. In: .","din1505-2-1":"Schwarzer, Knut ; Schneider, Jan ; Becker, Barbara ; Müller, Ulrich: Entkeimungsauslegung mit der \"Lemgo D- and z-value Database for Food. In: , 2012","apa":"Schwarzer, K., Schneider, J., Becker, B., & Müller, U. (2012). Entkeimungsauslegung mit der \"Lemgo D- and z-value Database for Food. ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik , Stuttgart - Hohenheim.","ieee":"K. Schwarzer, J. Schneider, B. Becker, and U. Müller, “Entkeimungsauslegung mit der \"Lemgo D- and z-value Database for Food,” presented at the ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik , Stuttgart - Hohenheim, 2012.","chicago":"Schwarzer, Knut, Jan Schneider, Barbara Becker, and Ulrich Müller. “Entkeimungsauslegung mit der \"Lemgo D- and z-value Database for Food,” 2012.","van":"Schwarzer K, Schneider J, Becker B, Müller U. Entkeimungsauslegung mit der \"Lemgo D- and z-value Database for Food. In 2012.","ama":"Schwarzer K, Schneider J, Becker B, Müller U. Entkeimungsauslegung mit der \"Lemgo D- and z-value Database for Food. In: ; 2012.","ufg":"Schwarzer, Knut u. a.: Entkeimungsauslegung mit der \"Lemgo D- and z-value Database for Food, in: o. Hg.: o. O. 2012.","mla":"Schwarzer, Knut, et al. Entkeimungsauslegung mit der \"Lemgo D- and z-value Database for Food. 2012.","bjps":"Schwarzer K et al. (2012) Entkeimungsauslegung mit der \"Lemgo D- and z-value Database for Food.","havard":"K. Schwarzer, J. Schneider, B. Becker, U. Müller, Entkeimungsauslegung mit der \"Lemgo D- and z-value Database for Food, in: 2012."}},{"type":"conference","date_created":"2021-03-30T07:27:55Z","user_id":"74222","date_updated":"2023-03-15T13:49:58Z","language":[{"iso":"ger"}],"_id":"5349","title":"Visueller Nachweis mechanisch-trennender Verfahren zur Sporenreduktion","citation":{"short":"U. Müller, K. Werner, in: 2012.","din1505-2-1":"Müller, Ulrich ; Werner, K.: Visueller Nachweis mechanisch-trennender Verfahren zur Sporenreduktion. In: , 2012","chicago-de":"Müller, Ulrich und K. Werner. 2012. Visueller Nachweis mechanisch-trennender Verfahren zur Sporenreduktion. In: .","apa":"Müller, U., & Werner, K. (2012). Visueller Nachweis mechanisch-trennender Verfahren zur Sporenreduktion. Presented at the ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik, Stuttgart-Hohenheim.","chicago":"Müller, Ulrich, and K. Werner. “Visueller Nachweis mechanisch-trennender Verfahren zur Sporenreduktion,” 2012.","van":"Müller U, Werner K. Visueller Nachweis mechanisch-trennender Verfahren zur Sporenreduktion. In 2012.","ufg":"Müller, Ulrich/Werner, K. (2012): Visueller Nachweis mechanisch-trennender Verfahren zur Sporenreduktion, in: .","havard":"U. Müller, K. Werner, Visueller Nachweis mechanisch-trennender Verfahren zur Sporenreduktion, in: 2012.","mla":"Müller, Ulrich, and K. Werner. Visueller Nachweis mechanisch-trennender Verfahren zur Sporenreduktion. 2012.","bjps":"Müller U and Werner K (2012) Visueller Nachweis mechanisch-trennender Verfahren zur Sporenreduktion.","ieee":"U. Müller and K. Werner, “Visueller Nachweis mechanisch-trennender Verfahren zur Sporenreduktion,” presented at the ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik, Stuttgart-Hohenheim, 2012.","ama":"Müller U, Werner K. Visueller Nachweis mechanisch-trennender Verfahren zur Sporenreduktion. In: ; 2012."},"author":[{"first_name":"Ulrich","last_name":"Müller","id":"12119","full_name":"Müller, Ulrich"},{"last_name":"Werner","first_name":"K.","full_name":"Werner, K."}],"year":2012,"conference":{"start_date":"2012-03-19","end_date":"2012-03-21","name":"ProcessNet-Fachgruppe Lebensmittelverfahrenstechnik","location":"Stuttgart-Hohenheim"},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"status":"public"},{"date_created":"2021-03-30T07:34:22Z","type":"conference","date_updated":"2024-04-29T10:31:10Z","user_id":"83778","_id":"5350","language":[{"iso":"eng"}],"title":"Comparison of a molecular detection system prototype with the DIN EN ISO-methods for the detection of Listeria monocytogenes and Salmonella enteritidis","citation":{"chicago-de":"Pfannebecker, Jens und Barbara Becker. 2012. Comparison of a molecular detection system prototype with the DIN EN ISO-methods for the detection of Listeria monocytogenes and Salmonella enteritidis. In: .","din1505-2-1":"Pfannebecker, Jens ; Becker, Barbara: Comparison of a molecular detection system prototype with the DIN EN ISO-methods for the detection of Listeria monocytogenes and Salmonella enteritidis. In: , 2012","short":"J. Pfannebecker, B. Becker, in: 2012.","ufg":"Pfannebecker, Jens/Becker, Barbara: Comparison of a molecular detection system prototype with the DIN EN ISO-methods for the detection of Listeria monocytogenes and Salmonella enteritidis, in: o. Hg.: o. O. 2012.","havard":"J. Pfannebecker, B. Becker, Comparison of a molecular detection system prototype with the DIN EN ISO-methods for the detection of Listeria monocytogenes and Salmonella enteritidis, in: 2012.","bjps":"Pfannebecker J and Becker B (2012) Comparison of a Molecular Detection System Prototype with the DIN EN ISO-Methods for the Detection of Listeria Monocytogenes and Salmonella Enteritidis.","mla":"Pfannebecker, Jens, and Barbara Becker. Comparison of a Molecular Detection System Prototype with the DIN EN ISO-Methods for the Detection of Listeria Monocytogenes and Salmonella Enteritidis. 2012.","van":"Pfannebecker J, Becker B. Comparison of a molecular detection system prototype with the DIN EN ISO-methods for the detection of Listeria monocytogenes and Salmonella enteritidis. In 2012.","ama":"Pfannebecker J, Becker B. Comparison of a molecular detection system prototype with the DIN EN ISO-methods for the detection of Listeria monocytogenes and Salmonella enteritidis. In: ; 2012.","chicago":"Pfannebecker, Jens, and Barbara Becker. “Comparison of a Molecular Detection System Prototype with the DIN EN ISO-Methods for the Detection of Listeria Monocytogenes and Salmonella Enteritidis,” 2012.","apa":"Pfannebecker, J., & Becker, B. (2012). Comparison of a molecular detection system prototype with the DIN EN ISO-methods for the detection of Listeria monocytogenes and Salmonella enteritidis. IAFP European Symposium on Food Safety, Warschau.","ieee":"J. Pfannebecker and B. Becker, “Comparison of a molecular detection system prototype with the DIN EN ISO-methods for the detection of Listeria monocytogenes and Salmonella enteritidis,” presented at the IAFP European Symposium on Food Safety, Warschau, 2012."},"conference":{"name":"IAFP European Symposium on Food Safety","location":"Warschau","end_date":"2012-03-23","start_date":"2012-03-21"},"department":[{"_id":"DEP4023"},{"_id":"DEP4026"}],"year":"2012","author":[{"full_name":"Pfannebecker, Jens","first_name":"Jens","id":"45690","last_name":"Pfannebecker"},{"full_name":"Becker, Barbara","id":"12640","last_name":"Becker","first_name":"Barbara"}],"status":"public"},{"_id":"5351","language":[{"iso":"eng"}],"date_updated":"2023-03-15T13:49:59Z","user_id":"45673","type":"conference","date_created":"2021-03-30T07:43:03Z","status":"public","department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"conference":{"start_date":"2012-03-27","end_date":"2012-03-27","name":"ANUGA FOOD TEC 2012, DLG-Forum 01: Emulsifying Technology ","location":"Köln"},"author":[{"first_name":"Ulrich","last_name":"Müller","full_name":"Müller, Ulrich","id":"12119"}],"year":2012,"citation":{"ama":"Müller U. Stable Emulsions by Direct Homogenization. In: ; 2012.","ieee":"U. Müller, “Stable Emulsions by Direct Homogenization,” presented at the ANUGA FOOD TEC 2012, DLG-Forum 01: Emulsifying Technology , Köln, 2012.","bjps":"Müller U (2012) Stable Emulsions by Direct Homogenization.","havard":"U. Müller, Stable Emulsions by Direct Homogenization, in: 2012.","mla":"Müller, Ulrich. Stable Emulsions by Direct Homogenization. 2012.","ufg":"Müller, Ulrich (2012): Stable Emulsions by Direct Homogenization, in: .","van":"Müller U. Stable Emulsions by Direct Homogenization. In 2012.","chicago":"Müller, Ulrich. “Stable Emulsions by Direct Homogenization,” 2012.","apa":"Müller, U. (2012). Stable Emulsions by Direct Homogenization. Presented at the ANUGA FOOD TEC 2012, DLG-Forum 01: Emulsifying Technology , Köln.","din1505-2-1":"Müller, Ulrich: Stable Emulsions by Direct Homogenization. In: , 2012","chicago-de":"Müller, Ulrich. 2012. Stable Emulsions by Direct Homogenization. In: .","short":"U. Müller, in: 2012."},"title":"Stable Emulsions by Direct Homogenization"},{"citation":{"van":"Lange H, Schwarzer K, Dammann A, Richert-Pöggeler K-R. Effects of steam and vacuum administration during decontamination on essential oil content in herbal medicines. Journal of Applied Botany and Food Quality 85. 2012;S. 34-40.","ufg":"Lange, H. et. al. (2012): Effects of steam and vacuum administration during decontamination on essential oil content in herbal medicines, in: Journal of Applied Botany and Food Quality 85, S. S. 34-40.","havard":"H. Lange, K. Schwarzer, A. Dammann, K.-R. Richert-Pöggeler, Effects of steam and vacuum administration during decontamination on essential oil content in herbal medicines, Journal of Applied Botany and Food Quality 85. (2012) S. 34-40.","mla":"Lange, H., et al. “Effects of Steam and Vacuum Administration during Decontamination on Essential Oil Content in Herbal Medicines.” Journal of Applied Botany and Food Quality 85, 2012, p. S. 34-40.","bjps":"Lange H et al. (2012) Effects of Steam and Vacuum Administration during Decontamination on Essential Oil Content in Herbal Medicines. Journal of Applied Botany and Food Quality 85 S. 34-40.","apa":"Lange, H., Schwarzer, K., Dammann, A., & Richert-Pöggeler, K.-R. (2012). Effects of steam and vacuum administration during decontamination on essential oil content in herbal medicines. Journal of Applied Botany and Food Quality 85, S. 34-40.","chicago":"Lange, H., Knut Schwarzer, Anna Dammann, and K.-R. Richert-Pöggeler. “Effects of Steam and Vacuum Administration during Decontamination on Essential Oil Content in Herbal Medicines.” Journal of Applied Botany and Food Quality 85, 2012, S. 34-40.","short":"H. Lange, K. Schwarzer, A. Dammann, K.-R. Richert-Pöggeler, Journal of Applied Botany and Food Quality 85 (2012) S. 34-40.","din1505-2-1":"Lange, H. ; Schwarzer, Knut ; Dammann, Anna ; Richert-Pöggeler, K.-R.: Effects of steam and vacuum administration during decontamination on essential oil content in herbal medicines. In: Journal of Applied Botany and Food Quality 85 (2012), S. S. 34-40","chicago-de":"Lange, H., Knut Schwarzer, Anna Dammann und K.-R. Richert-Pöggeler. 2012. Effects of steam and vacuum administration during decontamination on essential oil content in herbal medicines. Journal of Applied Botany and Food Quality 85: S. 34-40.","ama":"Lange H, Schwarzer K, Dammann A, Richert-Pöggeler K-R. Effects of steam and vacuum administration during decontamination on essential oil content in herbal medicines. Journal of Applied Botany and Food Quality 85. 2012:S. 34-40.","ieee":"H. Lange, K. Schwarzer, A. Dammann, and K.-R. Richert-Pöggeler, “Effects of steam and vacuum administration during decontamination on essential oil content in herbal medicines,” Journal of Applied Botany and Food Quality 85, p. S. 34-40, 2012."},"title":"Effects of steam and vacuum administration during decontamination on essential oil content in herbal medicines","status":"public","page":"S. 34-40","year":2012,"author":[{"full_name":"Lange, H.","first_name":"H.","last_name":"Lange"},{"id":"13329","first_name":"Knut","full_name":"Schwarzer, Knut","last_name":"Schwarzer"},{"first_name":"Anna","last_name":"Dammann","full_name":"Dammann, Anna"},{"last_name":"Richert-Pöggeler","full_name":"Richert-Pöggeler, K.-R.","first_name":"K.-R."}],"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"user_id":"68554","date_updated":"2023-03-15T13:49:59Z","publication":"Journal of Applied Botany and Food Quality 85","date_created":"2021-03-30T08:22:51Z","type":"journal_article","language":[{"iso":"eng"}],"_id":"5352"},{"intvolume":" 92","user_id":"79260","date_updated":"2023-03-15T13:49:59Z","publication":"Fleischwirtschaft 92 ","date_created":"2021-03-30T08:50:19Z","type":"journal_article","_id":"5353","language":[{"iso":"ger"}],"volume":92,"citation":{"ama":"Müller T, Stiebing A, Dederer I. Rohschinken und Rohwürste aus Eberfleisch. Fleischwirtschaft 92 . 2012;92(1):S. 93-98.","ieee":"T. Müller, A. Stiebing, and I. Dederer, “Rohschinken und Rohwürste aus Eberfleisch,” Fleischwirtschaft 92 , vol. 92, no. 1, p. S. 93-98, 2012.","mla":"Müller, T., et al. “Rohschinken und Rohwürste aus Eberfleisch.” Fleischwirtschaft 92 , vol. 92, no. 1, 2012, p. S. 93-98.","havard":"T. Müller, A. Stiebing, I. Dederer, Rohschinken und Rohwürste aus Eberfleisch, Fleischwirtschaft 92 . 92 (2012) S. 93-98.","bjps":"Müller T, Stiebing A and Dederer I (2012) Rohschinken und Rohwürste aus Eberfleisch. Fleischwirtschaft 92 92, S. 93-98.","ufg":"Müller, T. et. al. (2012): Rohschinken und Rohwürste aus Eberfleisch, in: Fleischwirtschaft 92 92 (1), S. S. 93-98.","van":"Müller T, Stiebing A, Dederer I. Rohschinken und Rohwürste aus Eberfleisch. Fleischwirtschaft 92 . 2012;92(1):S. 93-98.","chicago":"Müller, T., Achim Stiebing, and I. Dederer. “Rohschinken und Rohwürste aus Eberfleisch.” Fleischwirtschaft 92 92, no. 1 (2012): S. 93-98.","apa":"Müller, T., Stiebing, A., & Dederer, I. (2012). Rohschinken und Rohwürste aus Eberfleisch. Fleischwirtschaft 92 , 92(1), S. 93-98.","chicago-de":"Müller, T., Achim Stiebing und I. Dederer. 2012. Rohschinken und Rohwürste aus Eberfleisch. Fleischwirtschaft 92 92, Nr. 1: S. 93-98.","din1505-2-1":"Müller, T. ; Stiebing, Achim ; Dederer, I.: Rohschinken und Rohwürste aus Eberfleisch. In: Fleischwirtschaft 92 Bd. 92 (2012), Nr. 1, S. S. 93-98","short":"T. Müller, A. Stiebing, I. Dederer, Fleischwirtschaft 92 92 (2012) S. 93-98."},"title":"Rohschinken und Rohwürste aus Eberfleisch","status":"public","page":"S. 93-98","issue":"1","year":2012,"author":[{"last_name":"Müller","full_name":"Müller, T.","first_name":"T."},{"first_name":"Achim","full_name":"Stiebing, Achim","last_name":"Stiebing","id":"12235"},{"full_name":"Dederer, I.","last_name":"Dederer","first_name":"I."}],"department":[{"_id":"DEP4023"},{"_id":"DEP4019"}]},{"status":"public","page":"S. 174-181","author":[{"first_name":"H.","last_name":"Lange","full_name":"Lange, H."},{"first_name":"Anna","last_name":"Dammann","full_name":"Dammann, Anna"},{"id":"13329","first_name":"Knut","last_name":"Schwarzer","full_name":"Schwarzer, Knut"},{"last_name":"Müller","full_name":"Müller, Ulrich","id":"12119","first_name":"Ulrich"},{"first_name":"H.","last_name":"Krüger","full_name":"Krüger, H."}],"year":2012,"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"issue":"4","citation":{"din1505-2-1":"Lange, H. ; Dammann, Anna ; Schwarzer, Knut ; Müller, Ulrich ; Krüger, H.: Chemical, physical and sensory changes of herbal drugs after saturated steam decontamination. In: Z. Arznei- und Gewürzpflanzen 17 Bd. 17 (2012), Nr. 4, S. S. 174-181","chicago-de":"Lange, H., Anna Dammann, Knut Schwarzer, Ulrich Müller und H. Krüger. 2012. Chemical, physical and sensory changes of herbal drugs after saturated steam decontamination. Z. Arznei- und Gewürzpflanzen 17 17, Nr. 4: S. 174-181.","short":"H. Lange, A. Dammann, K. Schwarzer, U. Müller, H. Krüger, Z. Arznei- Und Gewürzpflanzen 17 17 (2012) S. 174-181.","havard":"H. Lange, A. Dammann, K. Schwarzer, U. Müller, H. Krüger, Chemical, physical and sensory changes of herbal drugs after saturated steam decontamination, Z. Arznei- Und Gewürzpflanzen 17 . 17 (2012) S. 174-181.","bjps":"Lange H et al. (2012) Chemical, Physical and Sensory Changes of Herbal Drugs after Saturated Steam Decontamination. Z. Arznei- und Gewürzpflanzen 17 17, S. 174-181.","mla":"Lange, H., et al. “Chemical, Physical and Sensory Changes of Herbal Drugs after Saturated Steam Decontamination.” Z. Arznei- Und Gewürzpflanzen 17 , vol. 17, no. 4, 2012, p. S. 174-181.","ufg":"Lange, H. et. al. (2012): Chemical, physical and sensory changes of herbal drugs after saturated steam decontamination, in: Z. Arznei- und Gewürzpflanzen 17 17 (4), S. S. 174-181.","van":"Lange H, Dammann A, Schwarzer K, Müller U, Krüger H. Chemical, physical and sensory changes of herbal drugs after saturated steam decontamination. Z Arznei- und Gewürzpflanzen 17 . 2012;17(4):S. 174-181.","chicago":"Lange, H., Anna Dammann, Knut Schwarzer, Ulrich Müller, and H. Krüger. “Chemical, Physical and Sensory Changes of Herbal Drugs after Saturated Steam Decontamination.” Z. Arznei- Und Gewürzpflanzen 17 17, no. 4 (2012): S. 174-181.","apa":"Lange, H., Dammann, A., Schwarzer, K., Müller, U., & Krüger, H. (2012). Chemical, physical and sensory changes of herbal drugs after saturated steam decontamination. Z. Arznei- Und Gewürzpflanzen 17 , 17(4), S. 174-181.","ama":"Lange H, Dammann A, Schwarzer K, Müller U, Krüger H. Chemical, physical and sensory changes of herbal drugs after saturated steam decontamination. Z Arznei- und Gewürzpflanzen 17 . 2012;17(4):S. 174-181.","ieee":"H. Lange, A. Dammann, K. Schwarzer, U. Müller, and H. Krüger, “Chemical, physical and sensory changes of herbal drugs after saturated steam decontamination,” Z. Arznei- und Gewürzpflanzen 17 , vol. 17, no. 4, p. S. 174-181, 2012."},"volume":17,"title":"Chemical, physical and sensory changes of herbal drugs after saturated steam decontamination","language":[{"iso":"eng"}],"_id":"5354","user_id":"68554","date_updated":"2023-03-15T13:49:59Z","intvolume":" 17","publication":"Z. Arznei- und Gewürzpflanzen 17 ","date_created":"2021-03-30T09:00:49Z","type":"journal_article"},{"citation":{"ieee":"B. Bilge, A. Dammann, K. Schwarzer, U. Müller, J. Schneider, and H. Woest, “Minimal Processing - A Way to a Gentle Pasteurization of Beer and Beverages,” presented at the 3rd Iberoamerican Symposium Brewing and Filling Technology, 2012.","apa":"Bilge, B., Dammann, A., Schwarzer, K., Müller, U., Schneider, J., & Woest, H. (2012). Minimal Processing - A Way to a Gentle Pasteurization of Beer and Beverages. 3rd Iberoamerican Symposium Brewing and Filling Technology.","chicago":"Bilge, B., Anna Dammann, Knut Schwarzer, Ulrich Müller, Jan Schneider, and H. Woest. “Minimal Processing - A Way to a Gentle Pasteurization of Beer and Beverages,” 2012.","ama":"Bilge B, Dammann A, Schwarzer K, Müller U, Schneider J, Woest H. Minimal Processing - A Way to a Gentle Pasteurization of Beer and Beverages. In: ; 2012.","van":"Bilge B, Dammann A, Schwarzer K, Müller U, Schneider J, Woest H. Minimal Processing - A Way to a Gentle Pasteurization of Beer and Beverages. In 2012.","havard":"B. Bilge, A. Dammann, K. Schwarzer, U. Müller, J. Schneider, H. Woest, Minimal Processing - A Way to a Gentle Pasteurization of Beer and Beverages, in: 2012.","mla":"Bilge, B., et al. Minimal Processing - A Way to a Gentle Pasteurization of Beer and Beverages. 2012.","bjps":"Bilge B et al. (2012) Minimal Processing - A Way to a Gentle Pasteurization of Beer and Beverages.","ufg":"Bilge, B. u. a.: Minimal Processing - A Way to a Gentle Pasteurization of Beer and Beverages, in: o. Hg.: o. O. 2012.","short":"B. Bilge, A. Dammann, K. Schwarzer, U. Müller, J. Schneider, H. Woest, in: 2012.","din1505-2-1":"Bilge, B. ; Dammann, Anna ; Schwarzer, Knut ; Müller, Ulrich ; Schneider, Jan ; Woest, H.: Minimal Processing - A Way to a Gentle Pasteurization of Beer and Beverages. In: , 2012","chicago-de":"Bilge, B., Anna Dammann, Knut Schwarzer, Ulrich Müller, Jan Schneider und H. Woest. 2012. Minimal Processing - A Way to a Gentle Pasteurization of Beer and Beverages. In: ."},"title":"Minimal Processing - A Way to a Gentle Pasteurization of Beer and Beverages","status":"public","author":[{"last_name":"Bilge","first_name":"B.","full_name":"Bilge, B."},{"first_name":"Anna","full_name":"Dammann, Anna","last_name":"Dammann"},{"last_name":"Schwarzer","first_name":"Knut","id":"13329","full_name":"Schwarzer, Knut"},{"full_name":"Müller, Ulrich","first_name":"Ulrich","id":"12119","last_name":"Müller"},{"last_name":"Schneider","id":"13209","full_name":"Schneider, Jan","first_name":"Jan","orcid":"0000-0001-6401-8873"},{"first_name":"H.","full_name":"Woest, H.","last_name":"Woest"}],"year":"2012","conference":{"end_date":"2012-06-21","start_date":"2012-06-18","name":"3rd Iberoamerican Symposium Brewing and Filling Technology"},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"},{"_id":"DEP4018"}],"user_id":"83779","date_updated":"2024-05-24T06:54:32Z","type":"conference","date_created":"2021-03-30T09:10:29Z","_id":"5355","language":[{"iso":"eng"}]},{"language":[{"iso":"ger"}],"_id":"5356","date_created":"2021-03-30T09:18:30Z","type":"conference_abstract","date_updated":"2024-05-24T06:55:09Z","user_id":"83779","conference":{"start_date":"2012-09-01","end_date":"2012-09-02","location":"Hamburg","name":"Craft Brewers Days"},"department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"year":"2012","author":[{"last_name":"Behler","full_name":"Behler, M.","first_name":"M."},{"first_name":"K.","last_name":"Queisser","full_name":"Queisser, K."},{"full_name":"Oppermann, L.","first_name":"L.","last_name":"Oppermann"},{"last_name":"Jacoby","full_name":"Jacoby, E.","first_name":"E."},{"first_name":"J.","full_name":"Lier, J.","last_name":"Lier"},{"first_name":"Timo","last_name":"Broeker","full_name":"Broeker, Timo","id":"43927"},{"last_name":"Schneider","full_name":"Schneider, Jan","id":"13209","first_name":"Jan","orcid":"0000-0001-6401-8873"}],"status":"public","title":"Entwicklung und Herstellung des fermentierten alkoholischen Getränks ALEicious","citation":{"chicago-de":"Behler, M., K. Queisser, L. Oppermann, E. Jacoby, J. Lier, Timo Broeker und Jan Schneider. 2012. Entwicklung und Herstellung des fermentierten alkoholischen Getränks ALEicious. In: .","din1505-2-1":"Behler, M. ; Queisser, K. ; Oppermann, L. ; Jacoby, E. ; Lier, J. ; Broeker, Timo ; Schneider, Jan: Entwicklung und Herstellung des fermentierten alkoholischen Getränks ALEicious. In: , 2012","short":"M. Behler, K. Queisser, L. Oppermann, E. Jacoby, J. Lier, T. Broeker, J. Schneider, in: 2012.","bjps":"Behler M et al. (2012) Entwicklung und Herstellung des fermentierten alkoholischen Getränks ALEicious.","havard":"M. Behler, K. Queisser, L. Oppermann, E. Jacoby, J. Lier, T. Broeker, J. Schneider, Entwicklung und Herstellung des fermentierten alkoholischen Getränks ALEicious, in: 2012.","mla":"Behler, M., et al. Entwicklung und Herstellung des fermentierten alkoholischen Getränks ALEicious. 2012.","ufg":"Behler, M. u. a.: Entwicklung und Herstellung des fermentierten alkoholischen Getränks ALEicious, in: o. Hg.: o. O. 2012.","van":"Behler M, Queisser K, Oppermann L, Jacoby E, Lier J, Broeker T, et al. Entwicklung und Herstellung des fermentierten alkoholischen Getränks ALEicious. In 2012.","chicago":"Behler, M., K. Queisser, L. Oppermann, E. Jacoby, J. Lier, Timo Broeker, and Jan Schneider. “Entwicklung und Herstellung des fermentierten alkoholischen Getränks ALEicious,” 2012.","apa":"Behler, M., Queisser, K., Oppermann, L., Jacoby, E., Lier, J., Broeker, T., & Schneider, J. (2012). Entwicklung und Herstellung des fermentierten alkoholischen Getränks ALEicious. Craft Brewers Days, Hamburg.","ama":"Behler M, Queisser K, Oppermann L, et al. Entwicklung und Herstellung des fermentierten alkoholischen Getränks ALEicious. In: ; 2012.","ieee":"M. Behler et al., “Entwicklung und Herstellung des fermentierten alkoholischen Getränks ALEicious,” presented at the Craft Brewers Days, Hamburg, 2012."}},{"language":[{"iso":"eng"}],"_id":"5357","date_created":"2021-03-30T09:42:08Z","type":"conference","user_id":"83779","date_updated":"2024-05-24T06:59:10Z","author":[{"first_name":"M.","last_name":"Steffens","full_name":"Steffens, M."},{"orcid":"0000-0001-6401-8873","first_name":"Jan","full_name":"Schneider, Jan","last_name":"Schneider","id":"13209"}],"year":"2012","conference":{"name":"GDL-Kongress","location":"Dresden","start_date":"2012-09-27","end_date":"2012-09-29"},"department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"status":"public","title":"Entschlüsselung der traditionellen Wasserkefirrezeptur zum Scale-Up","citation":{"ama":"Steffens M, Schneider J. Entschlüsselung der traditionellen Wasserkefirrezeptur zum Scale-Up. In: ; 2012.","ieee":"M. Steffens and J. Schneider, “Entschlüsselung der traditionellen Wasserkefirrezeptur zum Scale-Up,” presented at the GDL-Kongress, Dresden, 2012.","bjps":"Steffens M and Schneider J (2012) Entschlüsselung Der Traditionellen Wasserkefirrezeptur Zum Scale-Up.","havard":"M. Steffens, J. Schneider, Entschlüsselung der traditionellen Wasserkefirrezeptur zum Scale-Up, in: 2012.","mla":"Steffens, M., and Jan Schneider. Entschlüsselung Der Traditionellen Wasserkefirrezeptur Zum Scale-Up. 2012.","ufg":"Steffens, M./Schneider, Jan: Entschlüsselung der traditionellen Wasserkefirrezeptur zum Scale-Up, in: o. Hg.: o. O. 2012.","van":"Steffens M, Schneider J. Entschlüsselung der traditionellen Wasserkefirrezeptur zum Scale-Up. In 2012.","chicago":"Steffens, M., and Jan Schneider. “Entschlüsselung Der Traditionellen Wasserkefirrezeptur Zum Scale-Up,” 2012.","apa":"Steffens, M., & Schneider, J. (2012). Entschlüsselung der traditionellen Wasserkefirrezeptur zum Scale-Up. GDL-Kongress, Dresden.","din1505-2-1":"Steffens, M. ; Schneider, Jan: Entschlüsselung der traditionellen Wasserkefirrezeptur zum Scale-Up. In: , 2012","chicago-de":"Steffens, M. und Jan Schneider. 2012. Entschlüsselung der traditionellen Wasserkefirrezeptur zum Scale-Up. In: .","short":"M. Steffens, J. Schneider, in: 2012."}},{"_id":"5374","language":[{"iso":"eng"}],"type":"conference","date_created":"2021-03-31T07:14:49Z","date_updated":"2023-03-15T13:49:59Z","user_id":"74222","department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"conference":{"end_date":"2012-09-29","start_date":"2012-09-27","name":"GDL-Kongress Lebensmitteltechnologie 2012 ","location":"Dresden"},"author":[{"full_name":"Schwarzer, Knut","first_name":"Knut","id":"13329","last_name":"Schwarzer"},{"id":"43899","full_name":"Dammann_, Anna","first_name":"Anna","last_name":"Dammann_"},{"last_name":"Krüger","full_name":"Krüger, H. ","first_name":"H. "},{"last_name":"Lange","first_name":"H.","full_name":"Lange, H."},{"full_name":"Müller, Ulrich","first_name":"Ulrich","id":"12119","last_name":"Müller"}],"year":2012,"status":"public","title":"Mechanische Sattdampfentkeimung von Drogen","citation":{"short":"K. Schwarzer, A. Dammann_, H. Krüger, H. Lange, U. Müller, in: 2012.","chicago-de":"Schwarzer, Knut, Anna Dammann_, H. Krüger, H. Lange und Ulrich Müller. 2012. Mechanische Sattdampfentkeimung von Drogen. In: .","din1505-2-1":"Schwarzer, Knut ; Dammann_, Anna ; Krüger, H. ; Lange, H. ; Müller, Ulrich: Mechanische Sattdampfentkeimung von Drogen. In: , 2012","ama":"Schwarzer K, Dammann_ A, Krüger H, Lange H, Müller U. Mechanische Sattdampfentkeimung von Drogen. In: ; 2012.","van":"Schwarzer K, Dammann_ A, Krüger H, Lange H, Müller U. Mechanische Sattdampfentkeimung von Drogen. In 2012.","mla":"Schwarzer, Knut, et al. Mechanische Sattdampfentkeimung von Drogen. 2012.","havard":"K. Schwarzer, A. Dammann_, H. Krüger, H. Lange, U. Müller, Mechanische Sattdampfentkeimung von Drogen, in: 2012.","bjps":"Schwarzer K et al. (2012) Mechanische Sattdampfentkeimung von Drogen.","ufg":"Schwarzer, Knut et. al. (2012): Mechanische Sattdampfentkeimung von Drogen, in: .","ieee":"K. Schwarzer, A. Dammann_, H. Krüger, H. Lange, and U. Müller, “Mechanische Sattdampfentkeimung von Drogen,” presented at the GDL-Kongress Lebensmitteltechnologie 2012 , Dresden, 2012.","apa":"Schwarzer, K., Dammann_, A., Krüger, H., Lange, H., & Müller, U. (2012). Mechanische Sattdampfentkeimung von Drogen. Presented at the GDL-Kongress Lebensmitteltechnologie 2012 , Dresden.","chicago":"Schwarzer, Knut, Anna Dammann_, H. Krüger, H. Lange, and Ulrich Müller. “Mechanische Sattdampfentkeimung von Drogen,” 2012."}},{"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"conference":{"location":"Dresden","name":"GDL-Kongress Lebensmitteltechnologie 2012 ","start_date":"2012-09-27","end_date":"2012-09-29"},"year":2012,"author":[{"first_name":"Roland","id":"12864","full_name":"Pliske, Roland","last_name":"Pliske"},{"first_name":"Ulrich","last_name":"Müller","id":"12119","full_name":"Müller, Ulrich"},{"last_name":"Kohlus","first_name":"R.","full_name":"Kohlus, R."}],"status":"public","title":"Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trocknungsgutes","citation":{"short":"R. Pliske, U. Müller, R. Kohlus, in: 2012.","chicago-de":"Pliske, Roland, Ulrich Müller und R. Kohlus. 2012. Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trocknungsgutes. In: .","din1505-2-1":"Pliske, Roland ; Müller, Ulrich ; Kohlus, R.: Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trocknungsgutes. In: , 2012","van":"Pliske R, Müller U, Kohlus R. Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trocknungsgutes. In 2012.","ufg":"Pliske, Roland et. al. (2012): Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trocknungsgutes, in: .","havard":"R. Pliske, U. Müller, R. Kohlus, Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trocknungsgutes, in: 2012.","mla":"Pliske, Roland, et al. Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trocknungsgutes. 2012.","bjps":"Pliske R, Müller U and Kohlus R (2012) Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trocknungsgutes.","apa":"Pliske, R., Müller, U., & Kohlus, R. (2012). Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trocknungsgutes. Presented at the GDL-Kongress Lebensmitteltechnologie 2012 , Dresden.","chicago":"Pliske, Roland, Ulrich Müller, and R. Kohlus. “Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trocknungsgutes,” 2012.","ama":"Pliske R, Müller U, Kohlus R. Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trocknungsgutes. In: ; 2012.","ieee":"R. Pliske, U. Müller, and R. Kohlus, “Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trocknungsgutes,” presented at the GDL-Kongress Lebensmitteltechnologie 2012 , Dresden, 2012."},"_id":"5375","language":[{"iso":"ger"}],"type":"conference","date_created":"2021-03-31T07:29:03Z","date_updated":"2023-03-15T13:49:59Z","user_id":"45673"},{"conference":{"location":"Giessen","name":" AK GVC des VDI-Bezirksverein Mittelhessen an der TH Mittelhessen","end_date":"2012-11-12","start_date":"2012-11-12"},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"year":2012,"author":[{"last_name":"Müller","full_name":"Müller, Ulrich","id":"12119","first_name":"Ulrich"}],"status":"public","title":"Entkeimung pflanzlicher Rohstoffe für die Lebensmittelherstellung und pharmazeutische/r Produkte","citation":{"apa":"Müller, U. (2012). Entkeimung pflanzlicher Rohstoffe für die Lebensmittelherstellung und pharmazeutische/r Produkte. Presented at the AK GVC des VDI-Bezirksverein Mittelhessen an der TH Mittelhessen, Giessen.","chicago":"Müller, Ulrich. “Entkeimung Pflanzlicher Rohstoffe Für Die Lebensmittelherstellung Und Pharmazeutische/r Produkte,” 2012.","van":"Müller U. Entkeimung pflanzlicher Rohstoffe für die Lebensmittelherstellung und pharmazeutische/r Produkte. In 2012.","havard":"U. Müller, Entkeimung pflanzlicher Rohstoffe für die Lebensmittelherstellung und pharmazeutische/r Produkte, in: 2012.","mla":"Müller, Ulrich. Entkeimung Pflanzlicher Rohstoffe Für Die Lebensmittelherstellung Und Pharmazeutische/r Produkte. 2012.","bjps":"Müller U (2012) Entkeimung Pflanzlicher Rohstoffe Für Die Lebensmittelherstellung Und Pharmazeutische/r Produkte.","ufg":"Müller, Ulrich (2012): Entkeimung pflanzlicher Rohstoffe für die Lebensmittelherstellung und pharmazeutische/r Produkte, in: .","short":"U. Müller, in: 2012.","chicago-de":"Müller, Ulrich. 2012. Entkeimung pflanzlicher Rohstoffe für die Lebensmittelherstellung und pharmazeutische/r Produkte. In: .","din1505-2-1":"Müller, Ulrich: Entkeimung pflanzlicher Rohstoffe für die Lebensmittelherstellung und pharmazeutische/r Produkte. In: , 2012","ieee":"U. Müller, “Entkeimung pflanzlicher Rohstoffe für die Lebensmittelherstellung und pharmazeutische/r Produkte,” presented at the AK GVC des VDI-Bezirksverein Mittelhessen an der TH Mittelhessen, Giessen, 2012.","ama":"Müller U. Entkeimung pflanzlicher Rohstoffe für die Lebensmittelherstellung und pharmazeutische/r Produkte. In: ; 2012."},"language":[{"iso":"eng"}],"_id":"5377","date_created":"2021-03-31T08:29:32Z","type":"conference","date_updated":"2023-03-15T13:49:59Z","user_id":"45673"},{"status":"public","department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"conference":{"end_date":"2012-11-22","start_date":"2012-11-22","location":" Hochschule Ostwestfalen-Lippe, Lemgo","name":"Tagung „Homogenisier- und Emulgiertechnologie für die Lebensmittelindustrie“ des Institut für Lebensmitteltechnologie.NRW und der Food-Processing Initiative e.V."},"author":[{"id":"12119","full_name":"Müller, Ulrich","first_name":"Ulrich","last_name":"Müller"}],"year":2012,"citation":{"van":"Müller U. Gegenstrominjektionstechnologie. In 2012.","ufg":"Müller, Ulrich (2012): Gegenstrominjektionstechnologie, in: .","mla":"Müller, Ulrich. Gegenstrominjektionstechnologie. 2012.","bjps":"Müller U (2012) Gegenstrominjektionstechnologie.","havard":"U. Müller, Gegenstrominjektionstechnologie, in: 2012.","apa":"Müller, U. (2012). Gegenstrominjektionstechnologie. Presented at the Tagung „Homogenisier- und Emulgiertechnologie für die Lebensmittelindustrie“ des Institut für Lebensmitteltechnologie.NRW und der Food-Processing Initiative e.V., Hochschule Ostwestfalen-Lippe, Lemgo.","chicago":"Müller, Ulrich. “Gegenstrominjektionstechnologie,” 2012.","short":"U. Müller, in: 2012.","chicago-de":"Müller, Ulrich. 2012. Gegenstrominjektionstechnologie. In: .","din1505-2-1":"Müller, Ulrich: Gegenstrominjektionstechnologie. In: , 2012","ama":"Müller U. Gegenstrominjektionstechnologie. In: ; 2012.","ieee":"U. Müller, “Gegenstrominjektionstechnologie,” presented at the Tagung „Homogenisier- und Emulgiertechnologie für die Lebensmittelindustrie“ des Institut für Lebensmitteltechnologie.NRW und der Food-Processing Initiative e.V., Hochschule Ostwestfalen-Lippe, Lemgo, 2012."},"title":"Gegenstrominjektionstechnologie","language":[{"iso":"ger"}],"_id":"5378","date_updated":"2023-03-15T13:49:59Z","user_id":"45673","type":"conference","date_created":"2021-03-31T08:34:37Z"},{"date_created":"2021-03-31T08:38:03Z","type":"conference","user_id":"74222","date_updated":"2023-03-15T13:49:59Z","_id":"5379","language":[{"iso":"ger"}],"title":"Homogenisier- und Emulgiertechnologie - ein kleiner Überblick","citation":{"apa":"Müller, U. (2012). Homogenisier- und Emulgiertechnologie - ein kleiner Überblick. Presented at the Tagung „Homogenisier- und Emulgiertechnologie für die Lebensmittelindustrie“ des Institut für Lebensmitteltechnologie.NRW und der Food-Processing Initiative e.V. , Hochschule Ostwestfalen-Lippe, Lemgo.","ieee":"U. Müller, “Homogenisier- und Emulgiertechnologie - ein kleiner Überblick,” presented at the Tagung „Homogenisier- und Emulgiertechnologie für die Lebensmittelindustrie“ des Institut für Lebensmitteltechnologie.NRW und der Food-Processing Initiative e.V. , Hochschule Ostwestfalen-Lippe, Lemgo, 2012.","chicago":"Müller, Ulrich. “Homogenisier- und Emulgiertechnologie - ein kleiner Überblick,” 2012.","van":"Müller U. Homogenisier- und Emulgiertechnologie - ein kleiner Überblick. In 2012.","ama":"Müller U. Homogenisier- und Emulgiertechnologie - ein kleiner Überblick. In: ; 2012.","ufg":"Müller, Ulrich (2012): Homogenisier- und Emulgiertechnologie - ein kleiner Überblick, in: .","bjps":"Müller U (2012) Homogenisier- und Emulgiertechnologie - ein kleiner Überblick.","havard":"U. Müller, Homogenisier- und Emulgiertechnologie - ein kleiner Überblick, in: 2012.","mla":"Müller, Ulrich. Homogenisier- und Emulgiertechnologie - ein kleiner Überblick. 2012.","short":"U. Müller, in: 2012.","chicago-de":"Müller, Ulrich. 2012. Homogenisier- und Emulgiertechnologie - ein kleiner Überblick. In: .","din1505-2-1":"Müller, Ulrich: Homogenisier- und Emulgiertechnologie - ein kleiner Überblick. In: , 2012"},"author":[{"first_name":"Ulrich","last_name":"Müller","id":"12119","full_name":"Müller, Ulrich"}],"year":2012,"conference":{"name":"Tagung „Homogenisier- und Emulgiertechnologie für die Lebensmittelindustrie“ des Institut für Lebensmitteltechnologie.NRW und der Food-Processing Initiative e.V. ","location":"Hochschule Ostwestfalen-Lippe, Lemgo","start_date":"2012-11-22","end_date":"2012-11-22"},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"status":"public"},{"_id":"6455","language":[{"iso":"eng"}],"user_id":"45673","date_updated":"2023-03-15T13:50:06Z","type":"conference","date_created":"2021-09-21T08:18:59Z","status":"public","year":2011,"author":[{"full_name":"Müller, Ulrich","id":"12119","last_name":"Müller","first_name":"Ulrich"},{"last_name":"Wilkens","first_name":"H.","full_name":"Wilkens, H."}],"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"conference":{"end_date":"2011-12-09","start_date":"2011-12-09","location":"Lemgo","name":"8. Lemgoer Nachmittag zu Entkeimungsfragen"},"citation":{"chicago-de":"Müller, Ulrich und H. Wilkens. 2011. Tandem-Vortrag \"Luftsterilfiltration“,„Grundlagen Luftfiltern“, „Die Qualität der Umgebungsluft nach der Filtration der Außenluft bis zum Einlass\". In: .","din1505-2-1":"Müller, Ulrich ; Wilkens, H.: Tandem-Vortrag \"Luftsterilfiltration“,„Grundlagen Luftfiltern“, „Die Qualität der Umgebungsluft nach der Filtration der Außenluft bis zum Einlass\". In: , 2011","short":"U. Müller, H. Wilkens, in: 2011.","havard":"U. Müller, H. Wilkens, Tandem-Vortrag “Luftsterilfiltration“,„Grundlagen Luftfiltern“, „Die Qualität der Umgebungsluft nach der Filtration der Außenluft bis zum Einlass,” in: 2011.","bjps":"Müller U and Wilkens H (2011) Tandem-Vortrag ‘Luftsterilfiltration“,„Grundlagen Luftfiltern“, „Die Qualität Der Umgebungsluft Nach Der Filtration Der Außenluft Bis Zum Einlass’.","mla":"Müller, Ulrich, and H. Wilkens. Tandem-Vortrag “Luftsterilfiltration“,„Grundlagen Luftfiltern“, „Die Qualität Der Umgebungsluft Nach Der Filtration Der Außenluft Bis Zum Einlass.” 2011.","ufg":"Müller, Ulrich/Wilkens, H. (2011): Tandem-Vortrag \"Luftsterilfiltration“,„Grundlagen Luftfiltern“, „Die Qualität der Umgebungsluft nach der Filtration der Außenluft bis zum Einlass\", in: .","van":"Müller U, Wilkens H. Tandem-Vortrag “Luftsterilfiltration“,„Grundlagen Luftfiltern“, „Die Qualität der Umgebungsluft nach der Filtration der Außenluft bis zum Einlass.” In 2011.","chicago":"Müller, Ulrich, and H. Wilkens. “Tandem-Vortrag ‘Luftsterilfiltration“,„Grundlagen Luftfiltern“, „Die Qualität Der Umgebungsluft Nach Der Filtration Der Außenluft Bis Zum Einlass,’” 2011.","apa":"Müller, U., & Wilkens, H. (2011). Tandem-Vortrag “Luftsterilfiltration“,„Grundlagen Luftfiltern“, „Die Qualität der Umgebungsluft nach der Filtration der Außenluft bis zum Einlass.” Presented at the 8. Lemgoer Nachmittag zu Entkeimungsfragen, Lemgo.","ama":"Müller U, Wilkens H. Tandem-Vortrag “Luftsterilfiltration“,„Grundlagen Luftfiltern“, „Die Qualität der Umgebungsluft nach der Filtration der Außenluft bis zum Einlass.” In: ; 2011.","ieee":"U. Müller and H. Wilkens, “Tandem-Vortrag ‘Luftsterilfiltration“,„Grundlagen Luftfiltern“, „Die Qualität der Umgebungsluft nach der Filtration der Außenluft bis zum Einlass,’” presented at the 8. Lemgoer Nachmittag zu Entkeimungsfragen, Lemgo, 2011."},"title":"Tandem-Vortrag \"Luftsterilfiltration“,„Grundlagen Luftfiltern“, „Die Qualität der Umgebungsluft nach der Filtration der Außenluft bis zum Einlass\""},{"title":"Regionalpark RheinMain - Aufbruch in Eine Neue Dekade Der Parkentwicklung","extern":"1","citation":{"chicago":"Rohler, Hans-Peter. “Regionalpark RheinMain - Aufbruch in Eine Neue Dekade Der Parkentwicklung.” Stadt und Grün, no. 3 (2011): 64 ff.","apa":"Rohler, H.-P. (2011). Regionalpark RheinMain - Aufbruch in Eine Neue Dekade Der Parkentwicklung. Stadt und Grün, 3, 64 ff.","havard":"H.-P. Rohler, Regionalpark RheinMain - Aufbruch in Eine Neue Dekade Der Parkentwicklung, Stadt und Grün. (2011) 64 ff.","mla":"Rohler, Hans-Peter. “Regionalpark RheinMain - Aufbruch in Eine Neue Dekade Der Parkentwicklung.” Stadt und Grün, no. 3, 2011, p. 64 ff.","bjps":"Rohler H-P (2011) Regionalpark RheinMain - Aufbruch in Eine Neue Dekade Der Parkentwicklung. Stadt und Grün 64 ff.","ufg":"Rohler, Hans-Peter: Regionalpark RheinMain - Aufbruch in Eine Neue Dekade Der Parkentwicklung, in: Stadt und Grün (2011), H. 3, S. 64 ff.","van":"Rohler HP. Regionalpark RheinMain - Aufbruch in Eine Neue Dekade Der Parkentwicklung. Stadt und Grün. 2011;(3):64 ff.","din1505-2-1":"Rohler, Hans-Peter: Regionalpark RheinMain - Aufbruch in Eine Neue Dekade Der Parkentwicklung. In: Stadt und Grün. Berlin, Patzer Verlag (2011), Nr. 3, S. 64 ff","chicago-de":"Rohler, Hans-Peter. 2011. Regionalpark RheinMain - Aufbruch in Eine Neue Dekade Der Parkentwicklung. Stadt und Grün, Nr. 3: 64 ff.","short":"H.-P. Rohler, Stadt und Grün (2011) 64 ff.","ieee":"H.-P. Rohler, “Regionalpark RheinMain - Aufbruch in Eine Neue Dekade Der Parkentwicklung,” Stadt und Grün, no. 3, p. 64 ff, 2011.","ama":"Rohler HP. Regionalpark RheinMain - Aufbruch in Eine Neue Dekade Der Parkentwicklung. Stadt und Grün. 2011;(3):64 ff."},"publication_status":"published","year":"2011","author":[{"id":"49027","full_name":"Rohler, Hans-Peter","last_name":"Rohler","first_name":"Hans-Peter"}],"department":[{"_id":"DEP9000"},{"_id":"DEP1310"},{"_id":"DEP1055"},{"_id":"DEP9010"}],"issue":"3","status":"public","page":"64 ff","publisher":"Patzer Verlag","publication":"Stadt und Grün","publication_identifier":{"issn":["0948-9770"]},"type":"scientific_journal_article","date_created":"2024-07-02T13:00:08Z","user_id":"83781","date_updated":"2024-07-16T11:47:15Z","place":"Berlin","language":[{"iso":"ger"}],"_id":"11647"},{"title":"Real-time Wavelet-Based Inline Banknote-in-Bundle Counting for Cut-and-Bundle Machines","publication_status":"published","citation":{"short":"D. Petker, T. Türke, H. Willeke, J. Schaede, E. Gillich, V. Lohweg, in: IST/SPIE Electronic Imaging 2011 Conference, San Francisco, California, United States, 2011.","chicago-de":"Petker, Denis, Thomas Türke, Harald Willeke, Johannes Schaede, Eugen Gillich und Volker Lohweg. 2011. Real-time Wavelet-Based Inline Banknote-in-Bundle Counting for Cut-and-Bundle Machines. In: IST/SPIE Electronic Imaging 2011 Conference. San Francisco, California, United States. doi:https://doi.org/10.1117/12.872357, .","din1505-2-1":"Petker, Denis ; Türke, Thomas ; Willeke, Harald ; Schaede, Johannes ; Gillich, Eugen ; Lohweg, Volker: Real-time Wavelet-Based Inline Banknote-in-Bundle Counting for Cut-and-Bundle Machines. In: IST/SPIE Electronic Imaging 2011 Conference : San Francisco, California, United States, 2011","van":"Petker D, Türke T, Willeke H, Schaede J, Gillich E, Lohweg V. Real-time Wavelet-Based Inline Banknote-in-Bundle Counting for Cut-and-Bundle Machines. In: IST/SPIE Electronic Imaging 2011 Conference. San Francisco, California, United States; 2011.","mla":"Petker, Denis, et al. “Real-Time Wavelet-Based Inline Banknote-in-Bundle Counting for Cut-and-Bundle Machines.” IST/SPIE Electronic Imaging 2011 Conference, San Francisco, California, United States, 2011, doi:https://doi.org/10.1117/12.872357.","bjps":"Petker D et al. (2011) Real-Time Wavelet-Based Inline Banknote-in-Bundle Counting for Cut-and-Bundle Machines. IST/SPIE Electronic Imaging 2011 Conference. San Francisco, California, United States.","havard":"D. Petker, T. Türke, H. Willeke, J. Schaede, E. Gillich, V. Lohweg, Real-time Wavelet-Based Inline Banknote-in-Bundle Counting for Cut-and-Bundle Machines, in: IST/SPIE Electronic Imaging 2011 Conference, San Francisco, California, United States, 2011.","ufg":"Petker, Denis et. al. (2011): Real-time Wavelet-Based Inline Banknote-in-Bundle Counting for Cut-and-Bundle Machines, in: IST/SPIE Electronic Imaging 2011 Conference.","apa":"Petker, D., Türke, T., Willeke, H., Schaede, J., Gillich, E., & Lohweg, V. (2011). Real-time Wavelet-Based Inline Banknote-in-Bundle Counting for Cut-and-Bundle Machines. In IST/SPIE Electronic Imaging 2011 Conference. San Francisco, California, United States. https://doi.org/10.1117/12.872357","chicago":"Petker, Denis, Thomas Türke, Harald Willeke, Johannes Schaede, Eugen Gillich, and Volker Lohweg. “Real-Time Wavelet-Based Inline Banknote-in-Bundle Counting for Cut-and-Bundle Machines.” In IST/SPIE Electronic Imaging 2011 Conference. San Francisco, California, United States, 2011. https://doi.org/10.1117/12.872357.","ama":"Petker D, Türke T, Willeke H, Schaede J, Gillich E, Lohweg V. Real-time Wavelet-Based Inline Banknote-in-Bundle Counting for Cut-and-Bundle Machines. In: IST/SPIE Electronic Imaging 2011 Conference. San Francisco, California, United States; 2011. doi:https://doi.org/10.1117/12.872357","ieee":"D. Petker, T. Türke, H. Willeke, J. Schaede, E. Gillich, and V. Lohweg, “Real-time Wavelet-Based Inline Banknote-in-Bundle Counting for Cut-and-Bundle Machines,” in IST/SPIE Electronic Imaging 2011 Conference, 2011."},"abstract":[{"text":"Automatic banknote sheet cut-and-bundle machines are widely used within the scope of banknote production. Beside the cutting-and-bundling, which is a mature technology, image-processing-based quality inspection for this type of machine is attractive. We present in this work a new real-time Touchless Counting and perspective cutting blade quality insurance system, based on a Color-CCD-Camera and a dual-core Computer, for cut-and-bundle applications in banknote production. The system, which applies Wavelet-based multi-scale filtering is able to count banknotes inside a 100-bundle within 200-300 ms depending on the window size.","lang":"eng"}],"department":[{"_id":"DEP5023"}],"year":2011,"main_file_link":[{"url":"https://www.spiedigitallibrary.org/conference-proceedings-of-spie/7877/787703/Real-time-wavelet-based-inline-banknote-in-bundle-counting-for/10.1117/12.872357.full?SSO=1"}],"author":[{"last_name":"Petker","first_name":"Denis","full_name":"Petker, Denis"},{"first_name":"Thomas","last_name":"Türke","full_name":"Türke, Thomas"},{"first_name":"Harald","last_name":"Willeke","full_name":"Willeke, Harald"},{"last_name":"Schaede","first_name":"Johannes","full_name":"Schaede, Johannes","id":"2128"},{"full_name":"Gillich, Eugen","first_name":"Eugen","id":"1706","last_name":"Gillich"},{"orcid":"0000-0002-3325-7887","last_name":"Lohweg","id":"1804","full_name":"Lohweg, Volker","first_name":"Volker"}],"publisher":"San Francisco, California, United States","status":"public","type":"conference","date_created":"2019-12-02T10:36:37Z","publication":"IST/SPIE Electronic Imaging 2011 Conference","date_updated":"2023-03-15T13:49:38Z","user_id":"45673","doi":"https://doi.org/10.1117/12.872357","_id":"2096","language":[{"iso":"eng"}]},{"user_id":"45673","date_updated":"2023-03-15T13:49:38Z","publication":"Museumsrunde - IHK Lippe zu Detmold","date_created":"2019-12-02T10:38:58Z","type":"conference","_id":"2097","language":[{"iso":"eng"}],"citation":{"ama":"Lohweg V. Banknotenauthentifikation - Ohne Bildverarbeitung geht es nicht! In: Museumsrunde - IHK Lippe Zu Detmold. Detmold; 2011.","ieee":"V. Lohweg, “Banknotenauthentifikation - Ohne Bildverarbeitung geht es nicht!,” in Museumsrunde - IHK Lippe zu Detmold, 2011.","din1505-2-1":"Lohweg, Volker: Banknotenauthentifikation - Ohne Bildverarbeitung geht es nicht! In: Museumsrunde - IHK Lippe zu Detmold : Detmold, 2011","chicago-de":"Lohweg, Volker. 2011. Banknotenauthentifikation - Ohne Bildverarbeitung geht es nicht! In: Museumsrunde - IHK Lippe zu Detmold. Detmold.","short":"V. Lohweg, in: Museumsrunde - IHK Lippe Zu Detmold, Detmold, 2011.","bjps":"Lohweg V (2011) Banknotenauthentifikation - Ohne Bildverarbeitung Geht Es Nicht! Museumsrunde - IHK Lippe Zu Detmold. Detmold.","havard":"V. Lohweg, Banknotenauthentifikation - Ohne Bildverarbeitung geht es nicht!, in: Museumsrunde - IHK Lippe Zu Detmold, Detmold, 2011.","mla":"Lohweg, Volker. “Banknotenauthentifikation - Ohne Bildverarbeitung Geht Es Nicht!” Museumsrunde - IHK Lippe Zu Detmold, Detmold, 2011.","ufg":"Lohweg, Volker (2011): Banknotenauthentifikation - Ohne Bildverarbeitung geht es nicht!, in: Museumsrunde - IHK Lippe zu Detmold.","van":"Lohweg V. Banknotenauthentifikation - Ohne Bildverarbeitung geht es nicht! In: Museumsrunde - IHK Lippe zu Detmold. Detmold; 2011.","chicago":"Lohweg, Volker. “Banknotenauthentifikation - Ohne Bildverarbeitung Geht Es Nicht!” In Museumsrunde - IHK Lippe Zu Detmold. Detmold, 2011.","apa":"Lohweg, V. (2011). Banknotenauthentifikation - Ohne Bildverarbeitung geht es nicht! In Museumsrunde - IHK Lippe zu Detmold. Detmold."},"title":"Banknotenauthentifikation - Ohne Bildverarbeitung geht es nicht!","publisher":"Detmold","status":"public","author":[{"first_name":"Volker","full_name":"Lohweg, Volker","last_name":"Lohweg","id":"1804","orcid":"0000-0002-3325-7887"}],"year":2011,"department":[{"_id":"DEP5023"}]},{"date_updated":"2023-03-15T13:49:38Z","user_id":"45673","type":"conference","date_created":"2019-12-02T10:40:20Z","language":[{"iso":"eng"}],"_id":"2098","citation":{"van":"Glock S, Voth K, Schaede J, Lohweg V. A Framework for Possibilistic Multi-source Data Fusion with Monitoring of Sensor Reliability, World Conference on Soft Computing. In 2011.","ufg":"Glock, Stefan et. al. (2011): A Framework for Possibilistic Multi-source Data Fusion with Monitoring of Sensor Reliability, World Conference on Soft Computing, in: .","mla":"Glock, Stefan, et al. A Framework for Possibilistic Multi-Source Data Fusion with Monitoring of Sensor Reliability, World Conference on Soft Computing. 2011.","bjps":"Glock S et al. (2011) A Framework for Possibilistic Multi-Source Data Fusion with Monitoring of Sensor Reliability, World Conference on Soft Computing.","havard":"S. Glock, K. Voth, J. Schaede, V. Lohweg, A Framework for Possibilistic Multi-source Data Fusion with Monitoring of Sensor Reliability, World Conference on Soft Computing, in: 2011.","apa":"Glock, S., Voth, K., Schaede, J., & Lohweg, V. (2011). A Framework for Possibilistic Multi-source Data Fusion with Monitoring of Sensor Reliability, World Conference on Soft Computing.","chicago":"Glock, Stefan, Karl Voth, Johannes Schaede, and Volker Lohweg. “A Framework for Possibilistic Multi-Source Data Fusion with Monitoring of Sensor Reliability, World Conference on Soft Computing,” 2011.","short":"S. Glock, K. Voth, J. Schaede, V. Lohweg, in: 2011.","din1505-2-1":"Glock, Stefan ; Voth, Karl ; Schaede, Johannes ; Lohweg, Volker: A Framework for Possibilistic Multi-source Data Fusion with Monitoring of Sensor Reliability, World Conference on Soft Computing. In: , 2011","chicago-de":"Glock, Stefan, Karl Voth, Johannes Schaede und Volker Lohweg. 2011. A Framework for Possibilistic Multi-source Data Fusion with Monitoring of Sensor Reliability, World Conference on Soft Computing. In: .","ama":"Glock S, Voth K, Schaede J, Lohweg V. A Framework for Possibilistic Multi-source Data Fusion with Monitoring of Sensor Reliability, World Conference on Soft Computing. In: ; 2011.","ieee":"S. Glock, K. Voth, J. Schaede, and V. Lohweg, “A Framework for Possibilistic Multi-source Data Fusion with Monitoring of Sensor Reliability, World Conference on Soft Computing,” 2011."},"title":"A Framework for Possibilistic Multi-source Data Fusion with Monitoring of Sensor Reliability, World Conference on Soft Computing","status":"public","department":[{"_id":"DEP5023"}],"year":2011,"author":[{"id":"44020","full_name":"Glock, Stefan","first_name":"Stefan","last_name":"Glock"},{"first_name":"Karl","full_name":"Voth, Karl","last_name":"Voth"},{"id":"2128","full_name":"Schaede, Johannes","first_name":"Johannes","last_name":"Schaede"},{"orcid":"0000-0002-3325-7887","full_name":"Lohweg, Volker","id":"1804","first_name":"Volker","last_name":"Lohweg"}]},{"title":"Multi-sensory Machine Diagnosis on Security Printing Machines with Two Layer Conflict Solving","series_title":"Proceedings SENSOR 2011","citation":{"ama":"Voth K, Glock S, Mönks U, Türke T, Lohweg V. Multi-sensory Machine Diagnosis on Security Printing Machines with Two Layer Conflict Solving. In: SENSOR+TEST Conference 2011,. Proceedings SENSOR 2011. 7 – 9 June 2011, Nürnberg, Germany ; 2011:686-691. doi:10.5162/sensor11/sp2.1","ieee":"K. Voth, S. Glock, U. Mönks, T. Türke, and V. Lohweg, “Multi-sensory Machine Diagnosis on Security Printing Machines with Two Layer Conflict Solving,” in SENSOR+TEST Conference 2011, 2011, pp. 686–691.","din1505-2-1":"Voth, Karl ; Glock, Stefan ; Mönks, Uwe ; Türke, Thomas ; Lohweg, Volker: Multi-sensory Machine Diagnosis on Security Printing Machines with Two Layer Conflict Solving. In: SENSOR+TEST Conference 2011,, Proceedings SENSOR 2011 : 7 – 9 June 2011, Nürnberg, Germany , 2011, S. 686–691","chicago-de":"Voth, Karl, Stefan Glock, Uwe Mönks, Thomas Türke und Volker Lohweg. 2011. Multi-sensory Machine Diagnosis on Security Printing Machines with Two Layer Conflict Solving. In: SENSOR+TEST Conference 2011, 686–691. Proceedings SENSOR 2011. 7 – 9 June 2011, Nürnberg, Germany . doi:10.5162/sensor11/sp2.1, .","short":"K. Voth, S. Glock, U. Mönks, T. Türke, V. Lohweg, in: SENSOR+TEST Conference 2011, 7 – 9 June 2011, Nürnberg, Germany , 2011, pp. 686–691.","ufg":"Voth, Karl et. al. (2011): Multi-sensory Machine Diagnosis on Security Printing Machines with Two Layer Conflict Solving, in: SENSOR+TEST Conference 2011, (=Proceedings SENSOR 2011), S. 686–691.","havard":"K. Voth, S. Glock, U. Mönks, T. Türke, V. Lohweg, Multi-sensory Machine Diagnosis on Security Printing Machines with Two Layer Conflict Solving, in: SENSOR+TEST Conference 2011, 7 – 9 June 2011, Nürnberg, Germany , 2011: pp. 686–691.","mla":"Voth, Karl, et al. “Multi-Sensory Machine Diagnosis on Security Printing Machines with Two Layer Conflict Solving.” SENSOR+TEST Conference 2011, 7 – 9 June 2011, Nürnberg, Germany , 2011, pp. 686–91, doi:10.5162/sensor11/sp2.1.","bjps":"Voth K et al. (2011) Multi-Sensory Machine Diagnosis on Security Printing Machines with Two Layer Conflict Solving. SENSOR+TEST Conference 2011,. 7 – 9 June 2011, Nürnberg, Germany , pp. 686–691.","van":"Voth K, Glock S, Mönks U, Türke T, Lohweg V. Multi-sensory Machine Diagnosis on Security Printing Machines with Two Layer Conflict Solving. In: SENSOR+TEST Conference 2011,. 7 – 9 June 2011, Nürnberg, Germany ; 2011. p. 686–91. (Proceedings SENSOR 2011).","chicago":"Voth, Karl, Stefan Glock, Uwe Mönks, Thomas Türke, and Volker Lohweg. “Multi-Sensory Machine Diagnosis on Security Printing Machines with Two Layer Conflict Solving.” In SENSOR+TEST Conference 2011, 686–91. Proceedings SENSOR 2011. 7 – 9 June 2011, Nürnberg, Germany , 2011. https://doi.org/10.5162/sensor11/sp2.1.","apa":"Voth, K., Glock, S., Mönks, U., Türke, T., & Lohweg, V. (2011). Multi-sensory Machine Diagnosis on Security Printing Machines with Two Layer Conflict Solving. In SENSOR+TEST Conference 2011, (pp. 686–691). 7 – 9 June 2011, Nürnberg, Germany . https://doi.org/10.5162/sensor11/sp2.1"},"publication_status":"published","abstract":[{"lang":"eng","text":"In order to reduce time consuming and expensive flawed production in Security Printing Machines an inspection system for early recognition of consecutive errors is developed. It shall avoid printing errors by combining measuring data from several sensors with expert knowledge. The inspection quality is improved by acquiring several information sources, using different physical quantities, integrating expert knowledge and perception, extracting reasonable features, and generating intuitive results.\r\nThe TLCS (Two Layer Conflict Solving) approach is based on the Evidence Theory and uses conflict solving to fuse data. The first layer applies the Conflict Modified Dempster-Shafer-Theory (CMDST). Every two sensors‘ data are combined and conflicts are solved between individuals. In the second layer the data is fused using the results from the CMDST and the sensors’ original observations by the Group Conflict Redistribution (GCR). We introduce an improvement of the TLCS approach with reference to highly complex machine conditioning applications. In this context, the sensors are grouped to attributes applying expert knowledge. The fusion of the fuzzyfied sensor’s observations that are elements of one particular attribute is accomplished by the TLCS. Subsequently, the attributes’ conditions are merged using an Ordered Weighted Averaging Operator.\r\nIn security printing machines the wiping unit is the most sensible part. It is responsible for removing surplus ink around the engravings. Even small parameter manipulations cause errors during the production. Experienced machine operators recognize errors before they occur and stabilize the production by changing wiping unit parameters mainly. The fusion approach is evaluated in a wiping simulator. Current, impact sound, temperature and force are acquired and processed. Wear, parameter changes, and mechanical disturbances are detected by the introduced algorithm."}],"author":[{"full_name":"Voth, Karl","first_name":"Karl","last_name":"Voth"},{"first_name":"Stefan","id":"44020","last_name":"Glock","full_name":"Glock, Stefan"},{"last_name":"Mönks","id":"1825","full_name":"Mönks, Uwe","first_name":"Uwe"},{"full_name":"Türke, Thomas","first_name":"Thomas","last_name":"Türke"},{"id":"1804","full_name":"Lohweg, Volker","first_name":"Volker","last_name":"Lohweg","orcid":"0000-0002-3325-7887"}],"main_file_link":[{"open_access":"1","url":"https://www.ama-science.org/proceedings/details/528"}],"year":2011,"department":[{"_id":"DEP5023"}],"publisher":"7 – 9 June 2011, Nürnberg, Germany ","status":"public","page":"686-691","publication":"SENSOR+TEST Conference 2011,","publication_identifier":{"isbn":["978-3-9810993-9-3"]},"date_created":"2019-12-02T10:41:46Z","type":"conference","user_id":"45673","date_updated":"2023-03-15T13:49:38Z","oa":"1","_id":"2099","doi":"10.5162/sensor11/sp2.1","language":[{"iso":"eng"}]},{"author":[{"last_name":"Lohweg","first_name":"Volker","id":"1804","full_name":"Lohweg, Volker","orcid":"0000-0002-3325-7887"}],"year":2011,"department":[{"_id":"DEP5023"}],"publisher":"OWL-Maschinenbau","status":"public","title":"Kontextbasierte antizipatorische Multi-Sensor-Fusion – Mehr als Machine Conditioning (Vortrag)","citation":{"short":"V. Lohweg, in: 6. Innovationsforum “Automation als Innovationsmotor des deutschen Maschinenbaus” , OWL-Maschinenbau, Lemgo, 2011.","din1505-2-1":"Lohweg, Volker: Kontextbasierte antizipatorische Multi-Sensor-Fusion – Mehr als Machine Conditioning (Vortrag). In: 6. Innovationsforum „Automation als Innovationsmotor des deutschen Maschinenbaus“ . Lemgo : OWL-Maschinenbau, 2011","chicago-de":"Lohweg, Volker. 2011. Kontextbasierte antizipatorische Multi-Sensor-Fusion – Mehr als Machine Conditioning (Vortrag). In: 6. Innovationsforum „Automation als Innovationsmotor des deutschen Maschinenbaus“ . Lemgo: OWL-Maschinenbau.","ieee":"V. Lohweg, “Kontextbasierte antizipatorische Multi-Sensor-Fusion – Mehr als Machine Conditioning (Vortrag),” in 6. Innovationsforum “Automation als Innovationsmotor des deutschen Maschinenbaus” , 2011.","apa":"Lohweg, V. (2011). Kontextbasierte antizipatorische Multi-Sensor-Fusion – Mehr als Machine Conditioning (Vortrag). In 6. Innovationsforum “Automation als Innovationsmotor des deutschen Maschinenbaus” . Lemgo: OWL-Maschinenbau.","chicago":"Lohweg, Volker. “Kontextbasierte antizipatorische Multi-Sensor-Fusion – Mehr als Machine Conditioning (Vortrag).” In 6. Innovationsforum “Automation als Innovationsmotor des deutschen Maschinenbaus” . Lemgo: OWL-Maschinenbau, 2011.","ama":"Lohweg V. Kontextbasierte antizipatorische Multi-Sensor-Fusion – Mehr als Machine Conditioning (Vortrag). In: 6. Innovationsforum “Automation als Innovationsmotor des deutschen Maschinenbaus” . Lemgo: OWL-Maschinenbau; 2011.","van":"Lohweg V. Kontextbasierte antizipatorische Multi-Sensor-Fusion – Mehr als Machine Conditioning (Vortrag). In: 6 Innovationsforum “Automation als Innovationsmotor des deutschen Maschinenbaus” . Lemgo: OWL-Maschinenbau; 2011.","mla":"Lohweg, Volker. “Kontextbasierte antizipatorische Multi-Sensor-Fusion – Mehr als Machine Conditioning (Vortrag).” 6. Innovationsforum “Automation als Innovationsmotor des deutschen Maschinenbaus” , OWL-Maschinenbau, 2011.","havard":"V. Lohweg, Kontextbasierte antizipatorische Multi-Sensor-Fusion – Mehr als Machine Conditioning (Vortrag), in: 6. Innovationsforum “Automation als Innovationsmotor des deutschen Maschinenbaus” , OWL-Maschinenbau, Lemgo, 2011.","bjps":"Lohweg V (2011) Kontextbasierte antizipatorische Multi-Sensor-Fusion – Mehr als Machine Conditioning (Vortrag). 6. Innovationsforum ‘Automation als Innovationsmotor des deutschen Maschinenbaus’ . Lemgo: OWL-Maschinenbau.","ufg":"Lohweg, Volker (2011): Kontextbasierte antizipatorische Multi-Sensor-Fusion – Mehr als Machine Conditioning (Vortrag), in: 6. Innovationsforum „Automation als Innovationsmotor des deutschen Maschinenbaus“ , Lemgo."},"publication_status":"published","_id":"2100","place":"Lemgo","language":[{"iso":"ger"}],"publication":"6. Innovationsforum \"Automation als Innovationsmotor des deutschen Maschinenbaus\" ","date_created":"2019-12-02T14:29:03Z","type":"conference","user_id":"45673","date_updated":"2023-03-15T13:49:38Z"},{"publisher":"Intech Publishers","status":"public","department":[{"_id":"DEP5023"}],"main_file_link":[{"url":"https://www.intechopen.com/books/sensor-fusion-foundation-and-applications/a-possibilistic-framework-for-sensor-fusion-with-monitoring-of-sensor-reliability","open_access":"1"}],"author":[{"full_name":"Lohweg, Volker","last_name":"Lohweg","id":"1804","first_name":"Volker","orcid":"0000-0002-3325-7887"},{"first_name":"Stefan","last_name":"Glock","full_name":"Glock, Stefan","id":"44020"},{"first_name":"Karl","full_name":"Voth, Karl","last_name":"Voth"}],"year":2011,"publication_status":"published","citation":{"apa":"Lohweg, V., Glock, S., & Voth, K. (2011). A Possibilistic Framework for Sensor Fusion with Monitoring of Sensor Reliability, Sensor Fusion – Foundation and Applications. Vienna, July 2011: Intech Publishers. https://doi.org/10.5772/17384","ieee":"V. Lohweg, S. Glock, and K. Voth, “A Possibilistic Framework for Sensor Fusion with Monitoring of Sensor Reliability, Sensor Fusion – Foundation and Applications,” 2011.","chicago":"Lohweg, Volker, Stefan Glock, and Karl Voth. “A Possibilistic Framework for Sensor Fusion with Monitoring of Sensor Reliability, Sensor Fusion – Foundation and Applications.” Vienna, July 2011: Intech Publishers, 2011. https://doi.org/10.5772/17384.","van":"Lohweg V, Glock S, Voth K. A Possibilistic Framework for Sensor Fusion with Monitoring of Sensor Reliability, Sensor Fusion – Foundation and Applications. In Vienna, July 2011: Intech Publishers; 2011.","ama":"Lohweg V, Glock S, Voth K. A Possibilistic Framework for Sensor Fusion with Monitoring of Sensor Reliability, Sensor Fusion – Foundation and Applications. In: Vienna, July 2011: Intech Publishers; 2011. doi:10.5772/17384","ufg":"Lohweg, Volker et. al. (2011): A Possibilistic Framework for Sensor Fusion with Monitoring of Sensor Reliability, Sensor Fusion – Foundation and Applications, in: , Vienna, July 2011.","havard":"V. Lohweg, S. Glock, K. Voth, A Possibilistic Framework for Sensor Fusion with Monitoring of Sensor Reliability, Sensor Fusion – Foundation and Applications, in: Intech Publishers, Vienna, July 2011, 2011.","mla":"Lohweg, Volker, et al. A Possibilistic Framework for Sensor Fusion with Monitoring of Sensor Reliability, Sensor Fusion – Foundation and Applications. Intech Publishers, 2011, doi:10.5772/17384.","bjps":"Lohweg V, Glock S and Voth K (2011) A Possibilistic Framework for Sensor Fusion with Monitoring of Sensor Reliability, Sensor Fusion – Foundation and Applications. Vienna, July 2011: Intech Publishers.","short":"V. Lohweg, S. Glock, K. Voth, in: Intech Publishers, Vienna, July 2011, 2011.","chicago-de":"Lohweg, Volker, Stefan Glock und Karl Voth. 2011. A Possibilistic Framework for Sensor Fusion with Monitoring of Sensor Reliability, Sensor Fusion – Foundation and Applications. In: . Vienna, July 2011: Intech Publishers. doi:10.5772/17384, .","din1505-2-1":"Lohweg, Volker ; Glock, Stefan ; Voth, Karl: A Possibilistic Framework for Sensor Fusion with Monitoring of Sensor Reliability, Sensor Fusion – Foundation and Applications. In: . Vienna, July 2011 : Intech Publishers, 2011"},"title":"A Possibilistic Framework for Sensor Fusion with Monitoring of Sensor Reliability, Sensor Fusion – Foundation and Applications","doi":"10.5772/17384","_id":"2101","language":[{"iso":"eng"}],"place":"Vienna, July 2011","oa":"1","date_updated":"2023-03-15T13:49:38Z","user_id":"45673","type":"conference","date_created":"2019-12-02T14:30:38Z"},{"language":[{"iso":"ger"}],"keyword":["Sensor- und Informationsfusion","elektrischer Antrieb","Cyber-Physical System","Industrie 4.0","Big Data"],"_id":"2102","date_updated":"2023-03-15T13:49:38Z","user_id":"45673","type":"conference","date_created":"2019-12-02T14:32:58Z","status":"public","department":[{"_id":"DEP5023"}],"author":[{"full_name":"Voth, Karl","first_name":"Karl","last_name":"Voth"},{"full_name":"Dicks, Alexander","id":"1853","first_name":"Alexander","last_name":"Dicks"},{"first_name":"Volker","full_name":"Lohweg, Volker","id":"1804","last_name":"Lohweg","orcid":"0000-0002-3325-7887"}],"year":2011,"abstract":[{"lang":"ger","text":"Die Zustandsüberwachung erfolgt derzeit in der Regel durch Einsatz spezieller Sensorik, bspw. durch Vibrationsmessungen. Außerdem werden die Antriebe lediglich isoliert betrachtet, eine Zusammenführung anfallender Informationen eines räumlich verteilten Antriebsverbunds findet meist nicht statt. Im Folgenden wird ein neuartiges Motor-as-Sensor-Konzept vorgeschlagen und validiert, das eine antizipatorische Zustandsüberwachung ohne Einsatz zusätzlicher Sensorik allein durch Verarbeitung der phasenbezogenen Motorströme ermöglicht. Zusätzlich wird ein Informationsfusionskonzept vorge-stellt, das die Informationen aller im Verbund beteiligten Antriebe zusammenführt, um darüber eine mit weniger Unsicherheiten behaftete Aussage über den Zustand einer Ap-plikation herbeizuführen. Das Hauptaugenmerk liegt hierbei insbesondere auf der Beherrschung der anfallenden riesigen Datenmengen, die zur Verarbeitung in eingebetteten Systemen reduziert werden müssen."}],"publication_status":"published","citation":{"short":"K. Voth, A. Dicks, V. Lohweg, in: 2011.","chicago-de":"Voth, Karl, Alexander Dicks und Volker Lohweg. 2011. Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund. In: .","din1505-2-1":"Voth, Karl ; Dicks, Alexander ; Lohweg, Volker: Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund. In: , 2011","ieee":"K. Voth, A. Dicks, and V. Lohweg, “Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund,” 2011.","apa":"Voth, K., Dicks, A., & Lohweg, V. (2011). Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund.","chicago":"Voth, Karl, Alexander Dicks, and Volker Lohweg. “Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund,” 2011.","ama":"Voth K, Dicks A, Lohweg V. Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund. In: ; 2011.","van":"Voth K, Dicks A, Lohweg V. Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund. In 2011.","havard":"K. Voth, A. Dicks, V. Lohweg, Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund, in: 2011.","bjps":"Voth K, Dicks A and Lohweg V (2011) Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund.","mla":"Voth, Karl, et al. Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund. 2011.","ufg":"Voth, Karl et. al. (2011): Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund, in: ."},"title":"Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund"},{"title":"Rework mindert den Genusswert nicht : Sensorische Auswirkungen der Wiederverarbeitung von erhitztem Brühwurstbrät in Brühwürsten","publication_status":"published","citation":{"ama":"Upmann M, Stiebing A, Hölscher M. Rework mindert den Genusswert nicht : Sensorische Auswirkungen der Wiederverarbeitung von erhitztem Brühwurstbrät in Brühwürsten. Fleischwirtschaft. 2011;91(12):41-47.","van":"Upmann M, Stiebing A, Hölscher M. Rework mindert den Genusswert nicht : Sensorische Auswirkungen der Wiederverarbeitung von erhitztem Brühwurstbrät in Brühwürsten. Fleischwirtschaft. 2011;91(12):41–7.","havard":"M. Upmann, A. Stiebing, M. Hölscher, Rework mindert den Genusswert nicht : Sensorische Auswirkungen der Wiederverarbeitung von erhitztem Brühwurstbrät in Brühwürsten, Fleischwirtschaft. 91 (2011) 41–47.","bjps":"Upmann M, Stiebing A and Hölscher M (2011) Rework mindert den Genusswert nicht : Sensorische Auswirkungen der Wiederverarbeitung von erhitztem Brühwurstbrät in Brühwürsten. Fleischwirtschaft 91, 41–47.","mla":"Upmann, Matthias, et al. “Rework mindert den Genusswert nicht : Sensorische Auswirkungen der Wiederverarbeitung von erhitztem Brühwurstbrät in Brühwürsten.” Fleischwirtschaft, vol. 91, no. 12, Dt. Fachverl., 2011, pp. 41–47.","ufg":"Upmann, Matthias et. al. (2011): Rework mindert den Genusswert nicht : Sensorische Auswirkungen der Wiederverarbeitung von erhitztem Brühwurstbrät in Brühwürsten, in: Fleischwirtschaft 91 (12), S. 41–47.","ieee":"M. Upmann, A. Stiebing, and M. Hölscher, “Rework mindert den Genusswert nicht : Sensorische Auswirkungen der Wiederverarbeitung von erhitztem Brühwurstbrät in Brühwürsten,” Fleischwirtschaft, vol. 91, no. 12, pp. 41–47, 2011.","apa":"Upmann, M., Stiebing, A., & Hölscher, M. (2011). Rework mindert den Genusswert nicht : Sensorische Auswirkungen der Wiederverarbeitung von erhitztem Brühwurstbrät in Brühwürsten. Fleischwirtschaft, 91(12), 41–47.","chicago":"Upmann, Matthias, Achim Stiebing, and Maike Hölscher. “Rework mindert den Genusswert nicht : Sensorische Auswirkungen der Wiederverarbeitung von erhitztem Brühwurstbrät in Brühwürsten.” Fleischwirtschaft 91, no. 12 (2011): 41–47.","short":"M. Upmann, A. Stiebing, M. Hölscher, Fleischwirtschaft 91 (2011) 41–47.","din1505-2-1":"Upmann, Matthias ; Stiebing, Achim ; Hölscher, Maike: Rework mindert den Genusswert nicht : Sensorische Auswirkungen der Wiederverarbeitung von erhitztem Brühwurstbrät in Brühwürsten. In: Fleischwirtschaft Bd. 91. Frankfurt am Main, Dt. Fachverl. (2011), Nr. 12, S. 41–47","chicago-de":"Upmann, Matthias, Achim Stiebing und Maike Hölscher. 2011. Rework mindert den Genusswert nicht : Sensorische Auswirkungen der Wiederverarbeitung von erhitztem Brühwurstbrät in Brühwürsten. Fleischwirtschaft 91, Nr. 12: 41–47."},"volume":91,"department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"author":[{"first_name":"Matthias","last_name":"Upmann","id":"12666","full_name":"Upmann, Matthias"},{"last_name":"Stiebing","first_name":"Achim","id":"12235","full_name":"Stiebing, Achim"},{"last_name":"Hölscher","full_name":"Hölscher, Maike","id":"12647","first_name":"Maike"}],"year":2011,"issue":"12","page":"41-47","status":"public","publisher":"Dt. Fachverl.","date_created":"2020-05-22T07:17:08Z","type":"journal_article","publication_identifier":{"issn":["0015-363X"]},"publication":"Fleischwirtschaft","date_updated":"2023-03-15T13:49:40Z","user_id":"15514","intvolume":" 91","language":[{"iso":"ger"}],"place":"Frankfurt am Main","_id":"2442"},{"volume":91,"citation":{"short":"A. Stiebing, M. Upmann, K. Hillgärtner, Fleischwirtschaft 91 (2011) 86–91.","din1505-2-1":"Stiebing, Achim ; Upmann, Matthias ; Hillgärtner, K.: Anteil SB-verpackter Erzeugnisse dominiert - DLG-Qualitätsprüfungen 2014 - Rohwürste und Rohpökelwaren. In: Fleischwirtschaft Bd. 91 (2011), Nr. 9, S. 86–91","chicago-de":"Stiebing, Achim, Matthias Upmann und K. Hillgärtner. 2011. Anteil SB-verpackter Erzeugnisse dominiert - DLG-Qualitätsprüfungen 2014 - Rohwürste und Rohpökelwaren. Fleischwirtschaft 91, Nr. 9: 86–91.","apa":"Stiebing, A., Upmann, M., & Hillgärtner, K. (2011). Anteil SB-verpackter Erzeugnisse dominiert - DLG-Qualitätsprüfungen 2014 - Rohwürste und Rohpökelwaren. Fleischwirtschaft, 91(9), 86–91.","chicago":"Stiebing, Achim, Matthias Upmann, and K. Hillgärtner. “Anteil SB-verpackter Erzeugnisse dominiert - DLG-Qualitätsprüfungen 2014 - Rohwürste und Rohpökelwaren.” Fleischwirtschaft 91, no. 9 (2011): 86–91.","van":"Stiebing A, Upmann M, Hillgärtner K. Anteil SB-verpackter Erzeugnisse dominiert - DLG-Qualitätsprüfungen 2014 - Rohwürste und Rohpökelwaren. Fleischwirtschaft. 2011;91(9):86–91.","mla":"Stiebing, Achim, et al. “Anteil SB-verpackter Erzeugnisse dominiert - DLG-Qualitätsprüfungen 2014 - Rohwürste und Rohpökelwaren.” Fleischwirtschaft, vol. 91, no. 9, 2011, pp. 86–91.","bjps":"Stiebing A, Upmann M and Hillgärtner K (2011) Anteil SB-verpackter Erzeugnisse dominiert - DLG-Qualitätsprüfungen 2014 - Rohwürste und Rohpökelwaren. Fleischwirtschaft 91, 86–91.","havard":"A. Stiebing, M. Upmann, K. Hillgärtner, Anteil SB-verpackter Erzeugnisse dominiert - DLG-Qualitätsprüfungen 2014 - Rohwürste und Rohpökelwaren, Fleischwirtschaft. 91 (2011) 86–91.","ufg":"Stiebing, Achim/Upmann, Matthias/Hillgärtner, K.: Anteil SB-verpackter Erzeugnisse dominiert - DLG-Qualitätsprüfungen 2014 - Rohwürste und Rohpökelwaren, in: Fleischwirtschaft 91 (2011), H. 9, S. 86–91.","ieee":"A. Stiebing, M. Upmann, and K. Hillgärtner, “Anteil SB-verpackter Erzeugnisse dominiert - DLG-Qualitätsprüfungen 2014 - Rohwürste und Rohpökelwaren,” Fleischwirtschaft, vol. 91, no. 9, pp. 86–91, 2011.","ama":"Stiebing A, Upmann M, Hillgärtner K. Anteil SB-verpackter Erzeugnisse dominiert - DLG-Qualitätsprüfungen 2014 - Rohwürste und Rohpökelwaren. Fleischwirtschaft. 2011;91(9):86-91."},"publication_status":"published","title":"Anteil SB-verpackter Erzeugnisse dominiert - DLG-Qualitätsprüfungen 2014 - Rohwürste und Rohpökelwaren","status":"public","page":"86-91","author":[{"first_name":"Achim","last_name":"Stiebing","full_name":"Stiebing, Achim","id":"12235"},{"full_name":"Upmann, Matthias","last_name":"Upmann","id":"12666","first_name":"Matthias"},{"first_name":"K.","full_name":"Hillgärtner, K.","last_name":"Hillgärtner"}],"year":"2011","department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"issue":"9","user_id":"83778","date_updated":"2024-05-17T12:56:40Z","intvolume":" 91","publication":"Fleischwirtschaft","date_created":"2020-05-29T08:07:47Z","type":"journal_article","language":[{"iso":"ger"}],"_id":"2695"},{"intvolume":" 91","user_id":"83778","date_updated":"2024-05-17T12:57:07Z","publication":"Fleischwirtschaft","type":"journal_article","date_created":"2020-05-29T08:26:33Z","_id":"2698","language":[{"iso":"ger"}],"volume":91,"citation":{"chicago":"Stiebing, Achim, Matthias Upmann, and K. Hillgärtner. “Anteil SB-verpackter Erzeugnisse gestiegen - DLG-Qualitätsprüfungen 2013 - Rohwürste und Rohpökelwaren.” Fleischwirtschaft 91 (2011): 86–91.","apa":"Stiebing, A., Upmann, M., & Hillgärtner, K. (2011). Anteil SB-verpackter Erzeugnisse gestiegen - DLG-Qualitätsprüfungen 2013 - Rohwürste und Rohpökelwaren. Fleischwirtschaft, 91, 86–91.","ieee":"A. Stiebing, M. Upmann, and K. Hillgärtner, “Anteil SB-verpackter Erzeugnisse gestiegen - DLG-Qualitätsprüfungen 2013 - Rohwürste und Rohpökelwaren,” Fleischwirtschaft, vol. 91, pp. 86–91, 2011.","ufg":"Stiebing, Achim/Upmann, Matthias/Hillgärtner, K.: Anteil SB-verpackter Erzeugnisse gestiegen - DLG-Qualitätsprüfungen 2013 - Rohwürste und Rohpökelwaren, in: Fleischwirtschaft 91 (2011), S. 86–91.","mla":"Stiebing, Achim, et al. “Anteil SB-verpackter Erzeugnisse gestiegen - DLG-Qualitätsprüfungen 2013 - Rohwürste und Rohpökelwaren.” Fleischwirtschaft, vol. 91, 2011, pp. 86–91.","havard":"A. Stiebing, M. Upmann, K. Hillgärtner, Anteil SB-verpackter Erzeugnisse gestiegen - DLG-Qualitätsprüfungen 2013 - Rohwürste und Rohpökelwaren, Fleischwirtschaft. 91 (2011) 86–91.","bjps":"Stiebing A, Upmann M and Hillgärtner K (2011) Anteil SB-verpackter Erzeugnisse gestiegen - DLG-Qualitätsprüfungen 2013 - Rohwürste und Rohpökelwaren. Fleischwirtschaft 91, 86–91.","van":"Stiebing A, Upmann M, Hillgärtner K. Anteil SB-verpackter Erzeugnisse gestiegen - DLG-Qualitätsprüfungen 2013 - Rohwürste und Rohpökelwaren. Fleischwirtschaft. 2011;91:86–91.","ama":"Stiebing A, Upmann M, Hillgärtner K. Anteil SB-verpackter Erzeugnisse gestiegen - DLG-Qualitätsprüfungen 2013 - Rohwürste und Rohpökelwaren. Fleischwirtschaft. 2011;91:86-91.","din1505-2-1":"Stiebing, Achim ; Upmann, Matthias ; Hillgärtner, K.: Anteil SB-verpackter Erzeugnisse gestiegen - DLG-Qualitätsprüfungen 2013 - Rohwürste und Rohpökelwaren. In: Fleischwirtschaft Bd. 91 (2011), S. 86–91","chicago-de":"Stiebing, Achim, Matthias Upmann und K. Hillgärtner. 2011. Anteil SB-verpackter Erzeugnisse gestiegen - DLG-Qualitätsprüfungen 2013 - Rohwürste und Rohpökelwaren. Fleischwirtschaft 91: 86–91.","short":"A. Stiebing, M. Upmann, K. Hillgärtner, Fleischwirtschaft 91 (2011) 86–91."},"publication_status":"published","title":"Anteil SB-verpackter Erzeugnisse gestiegen - DLG-Qualitätsprüfungen 2013 - Rohwürste und Rohpökelwaren","status":"public","page":"86-91","author":[{"full_name":"Stiebing, Achim","first_name":"Achim","id":"12235","last_name":"Stiebing"},{"full_name":"Upmann, Matthias","id":"12666","last_name":"Upmann","first_name":"Matthias"},{"full_name":"Hillgärtner, K.","first_name":"K.","last_name":"Hillgärtner"}],"year":"2011","department":[{"_id":"DEP4023"},{"_id":"DEP4019"}]},{"title":"Hybrid Drivetrain Simulation for Hardware-in-the-Loop Applications","article_type":"original","publication_status":"published","citation":{"ama":"Schulte T, Schulze T, Sauer J. Hybrid Drivetrain Simulation for Hardware-in-the-Loop Applications. SAE 2011 World Congress & Exhibition, April 2011. 2011.","ieee":"T. Schulte, T. Schulze, and J. Sauer, “Hybrid Drivetrain Simulation for Hardware-in-the-Loop Applications,” SAE 2011 World Congress & Exhibition, April 2011, 2011.","mla":"Schulte, Thomas, et al. “Hybrid Drivetrain Simulation for Hardware-in-the-Loop Applications.” SAE 2011 World Congress & Exhibition, April 2011, 2011.","havard":"T. Schulte, T. Schulze, J. Sauer, Hybrid Drivetrain Simulation for Hardware-in-the-Loop Applications, SAE 2011 World Congress & Exhibition, April 2011. (2011).","bjps":"Schulte T, Schulze T and Sauer J (2011) Hybrid Drivetrain Simulation for Hardware-in-the-Loop Applications. SAE 2011 World Congress & Exhibition, April 2011.","ufg":"Schulte, Thomas et. al. (2011): Hybrid Drivetrain Simulation for Hardware-in-the-Loop Applications, in: SAE 2011 World Congress & Exhibition, April 2011.","van":"Schulte T, Schulze T, Sauer J. Hybrid Drivetrain Simulation for Hardware-in-the-Loop Applications. SAE 2011 World Congress & Exhibition, April 2011. 2011;","chicago":"Schulte, Thomas, Tino Schulze, and Jörg Sauer. “Hybrid Drivetrain Simulation for Hardware-in-the-Loop Applications.” SAE 2011 World Congress & Exhibition, April 2011, 2011.","apa":"Schulte, T., Schulze, T., & Sauer, J. (2011). Hybrid Drivetrain Simulation for Hardware-in-the-Loop Applications. SAE 2011 World Congress & Exhibition, April 2011.","din1505-2-1":"Schulte, Thomas ; Schulze, Tino ; Sauer, Jörg: Hybrid Drivetrain Simulation for Hardware-in-the-Loop Applications. In: SAE 2011 World Congress & Exhibition, April 2011 (2011)","chicago-de":"Schulte, Thomas, Tino Schulze und Jörg Sauer. 2011. Hybrid Drivetrain Simulation for Hardware-in-the-Loop Applications. SAE 2011 World Congress & Exhibition, April 2011.","short":"T. Schulte, T. Schulze, J. Sauer, SAE 2011 World Congress & Exhibition, April 2011 (2011)."},"abstract":[{"text":"This paper describes challenges and possible solution of hybrid electrical vehicles test systems with a special focus on hardware-in-the-loop (HIL) test bench. The degree of novelty of this work can be seen in the fact that development and test of ECU for hybrid electrical powertrains can move more and more from mechanical test benches with real automotive components to HIL test systems. The challenging task in terms of electrical interface between an electric motor ECU and an HIL system and necessary real-time capable simulation models for electric machines have been investigated and partly solved. Even cell balancing strategies performed by battery management systems (BMU) can be developed and tested using HIL technology with battery simulation models and a precise cell voltage simulation on electrical level.","lang":"eng"}],"department":[{"_id":"DEP6020"}],"year":2011,"author":[{"full_name":"Schulte, Thomas","id":"46242","first_name":"Thomas","last_name":"Schulte"},{"last_name":"Schulze","first_name":"Tino","full_name":"Schulze, Tino"},{"full_name":"Sauer, Jörg","first_name":"Jörg","last_name":"Sauer"}],"status":"public","type":"journal_article","date_created":"2020-11-24T10:09:37Z","publication":"SAE 2011 World Congress & Exhibition, April 2011","publication_identifier":{"issn":["0148-7191"]},"date_updated":"2023-03-15T13:49:50Z","user_id":"74004","_id":"4041","language":[{"iso":"eng"}]},{"status":"public","abstract":[{"lang":"eng","text":"Using electric motors for complex and increasingly safety-critical functions in vehicles re-quires comprehensive testing to be performed during system development. This applies above all to the innovative drive concepts used in hybrid and electrical vehicles. Hardware-in-the-loop simulation has become a standard method for testing the software functions for these. There are various interfaces that are suitable for connecting the electronic control unit to the hardware-in-the-loop simulator for systems with electric drives. Test systems that reproduce the physical electrical signals (currents and voltages) at the ECU connectors are also increasingly required. This paper presents several concepts for simulating electric drives by means of electronic load emulation. Particular attention is paid to simulating high-power (> 10 kW) and high-voltage (> 100 V) electric drives."}],"year":2011,"main_file_link":[{"url":"https://ifac.papercept.net/conferences/scripts/abstract.pl?ConfID=20&Number=180"}],"author":[{"first_name":"Thomas","last_name":"Schulte","full_name":"Schulte, Thomas","id":"46242"},{"last_name":"Bracker","first_name":"Jörg","full_name":"Bracker, Jörg"}],"department":[{"_id":"DEP6020"}],"conference":{"end_date":"2010-07-14","start_date":"2010-07-12","location":"München","name":"IFAC Symposium Advances in Automotive Control 2010"},"citation":{"ama":"Schulte T, Bracker J. Real-Time Simulation of Electric Drives by Electronic Load Emulation. In: IFAC Symposium “Advances in Automotive Control (AAC 2010). ; 2011.","ieee":"T. Schulte and J. Bracker, “Real-Time Simulation of Electric Drives by Electronic Load Emulation,” in IFAC Symposium “Advances in Automotive Control (AAC 2010), München, 2011.","ufg":"Schulte, Thomas/Bracker, Jörg (2011): Real-Time Simulation of Electric Drives by Electronic Load Emulation, in: IFAC Symposium “Advances in Automotive Control (AAC 2010).","bjps":"Schulte T and Bracker J (2011) Real-Time Simulation of Electric Drives by Electronic Load Emulation. IFAC Symposium “Advances in Automotive Control (AAC 2010).","mla":"Schulte, Thomas, and Jörg Bracker. “Real-Time Simulation of Electric Drives by Electronic Load Emulation.” IFAC Symposium “Advances in Automotive Control (AAC 2010), 2011.","havard":"T. Schulte, J. Bracker, Real-Time Simulation of Electric Drives by Electronic Load Emulation, in: IFAC Symposium “Advances in Automotive Control (AAC 2010), 2011.","van":"Schulte T, Bracker J. Real-Time Simulation of Electric Drives by Electronic Load Emulation. In: IFAC Symposium “Advances in Automotive Control (AAC 2010). 2011.","chicago":"Schulte, Thomas, and Jörg Bracker. “Real-Time Simulation of Electric Drives by Electronic Load Emulation.” In IFAC Symposium “Advances in Automotive Control (AAC 2010), 2011.","apa":"Schulte, T., & Bracker, J. (2011). Real-Time Simulation of Electric Drives by Electronic Load Emulation. In IFAC Symposium “Advances in Automotive Control (AAC 2010). München.","chicago-de":"Schulte, Thomas und Jörg Bracker. 2011. Real-Time Simulation of Electric Drives by Electronic Load Emulation. In: IFAC Symposium “Advances in Automotive Control (AAC 2010).","din1505-2-1":"Schulte, Thomas ; Bracker, Jörg: Real-Time Simulation of Electric Drives by Electronic Load Emulation. In: IFAC Symposium “Advances in Automotive Control (AAC 2010), 2011","short":"T. Schulte, J. Bracker, in: IFAC Symposium “Advances in Automotive Control (AAC 2010), 2011."},"title":"Real-Time Simulation of Electric Drives by Electronic Load Emulation","_id":"4042","language":[{"iso":"eng"}],"user_id":"74004","date_updated":"2023-03-15T13:49:50Z","publication":"IFAC Symposium “Advances in Automotive Control (AAC 2010)","type":"conference","date_created":"2020-11-24T10:14:08Z"},{"language":[{"iso":"ger"}],"date_updated":"2023-03-15T13:49:50Z","file_date_updated":"2020-11-24T10:21:27Z","date_created":"2020-11-24T10:18:59Z","publication_identifier":{"issn":["0939-5326"]},"publication":"Automobil-Elektronik : das Automotive-Magazin von all-electronics","page":"46 - 47","status":"public","year":2011,"author":[{"full_name":"Schulte, Thomas","last_name":"Schulte","id":"46242","first_name":"Thomas"},{"full_name":"Plöger, Markus","last_name":"Plöger","first_name":"Markus"},{"last_name":"Holthaus","full_name":"Holthaus, Nils","first_name":"Nils"}],"citation":{"short":"T. Schulte, M. Plöger, N. Holthaus, Automobil-Elektronik : das Automotive-Magazin von all-electronics (2011) 46–47.","chicago-de":"Schulte, Thomas, Markus Plöger und Nils Holthaus. 2011. E-Motoren : Hardware-in-the-Loop-Test mit voller Leistung. Automobil-Elektronik : das Automotive-Magazin von all-electronics, Nr. 1: 46–47.","din1505-2-1":"Schulte, Thomas ; Plöger, Markus ; Holthaus, Nils: E-Motoren : Hardware-in-the-Loop-Test mit voller Leistung. In: Automobil-Elektronik : das Automotive-Magazin von all-electronics. Heidelberg, Hüthig (2011), Nr. 1, S. 46–47","ama":"Schulte T, Plöger M, Holthaus N. E-Motoren : Hardware-in-the-Loop-Test mit voller Leistung. Automobil-Elektronik : das Automotive-Magazin von all-electronics. 2011;(1):46-47.","van":"Schulte T, Plöger M, Holthaus N. E-Motoren : Hardware-in-the-Loop-Test mit voller Leistung. Automobil-Elektronik : das Automotive-Magazin von all-electronics. 2011;(1):46–7.","havard":"T. Schulte, M. Plöger, N. Holthaus, E-Motoren : Hardware-in-the-Loop-Test mit voller Leistung, Automobil-Elektronik : das Automotive-Magazin von all-electronics. (2011) 46–47.","bjps":"Schulte T, Plöger M and Holthaus N (2011) E-Motoren : Hardware-in-the-Loop-Test mit voller Leistung. Automobil-Elektronik : das Automotive-Magazin von all-electronics 46–47.","mla":"Schulte, Thomas, et al. “E-Motoren : Hardware-in-the-Loop-Test mit voller Leistung.” Automobil-Elektronik : das Automotive-Magazin von all-electronics, no. 1, Hüthig, 2011, pp. 46–47.","ufg":"Schulte, Thomas et. al. (2011): E-Motoren : Hardware-in-the-Loop-Test mit voller Leistung, in: Automobil-Elektronik : das Automotive-Magazin von all-electronics (1), S. 46–47.","ieee":"T. Schulte, M. Plöger, and N. Holthaus, “E-Motoren : Hardware-in-the-Loop-Test mit voller Leistung,” Automobil-Elektronik : das Automotive-Magazin von all-electronics, no. 1, pp. 46–47, 2011.","apa":"Schulte, T., Plöger, M., & Holthaus, N. (2011). E-Motoren : Hardware-in-the-Loop-Test mit voller Leistung. Automobil-Elektronik : das Automotive-Magazin von all-electronics, (1), 46–47.","chicago":"Schulte, Thomas, Markus Plöger, and Nils Holthaus. “E-Motoren : Hardware-in-the-Loop-Test mit voller Leistung.” Automobil-Elektronik : das Automotive-Magazin von all-electronics, no. 1 (2011): 46–47."},"title":"E-Motoren : Hardware-in-the-Loop-Test mit voller Leistung","place":"Heidelberg","_id":"4043","has_accepted_license":"1","user_id":"74004","type":"journal_article","publisher":"Hüthig","department":[{"_id":"DEP6020"}],"ddc":["620"],"issue":"1","abstract":[{"lang":"ger","text":"Die zukünftig zunehmende Elektrifizierung des Antriebsstrangs erfordert die Entwicklung neuer elektrischer Antriebs- und Regelungskonzepte. Die hierfür notwendigen Steuergeräte und Regelalgorithmen werden deutlich komplexer. Tests der neuen innovativen Technologien an Prüfständen und Prototypfahrzeugen sind kosten- und zeitaufwändig. Deshalb setzen die Entwickler während der gesamten Entwicklung modellbasierte Entwicklungsverfahren ein. Für den Test der Steuergeräte und insbesondere ihrer Software hat sich dabei die Hardware-in-the-Loop (HIL)-Simulation sowohl bei den Zulieferern als auch bei den Fahrzeugherstellern als Standardwerkzeug in der Elektronikentwicklung etabliert."}],"publication_status":"published","article_type":"original","file":[{"access_level":"local","file_id":"4044","file_size":824019,"date_created":"2020-11-24T10:21:27Z","content_type":"application/pdf","file_name":"schulte_emotoren.pdf","relation":"main_file","creator":"czr-e2t","date_updated":"2020-11-24T10:21:27Z"}]},{"title":"Hardware-in-the-loop-Simulation für elektrische Antriebssysteme","citation":{"ama":"Schulte T, Puschmann F, Wertz H. Hardware-in-the-loop-Simulation für elektrische Antriebssysteme. In: Elektrische Automatisierung - Systeme und Komponenten : SPS/IPC/Drives 2010, Fachmesse & Kongress, 23. - 25. Nov. 2010, Nürnberg ; [Tagungsband] . Berlin: VDE-Verlag; 2011:215-223.","ieee":"T. Schulte, F. Puschmann, and H. Wertz, “Hardware-in-the-loop-Simulation für elektrische Antriebssysteme,” in Elektrische Automatisierung - Systeme und Komponenten : SPS/IPC/Drives 2010, Fachmesse & Kongress, 23. - 25. Nov. 2010, Nürnberg ; [Tagungsband] , Berlin: VDE-Verlag, 2011, pp. 215–223.","chicago-de":"Schulte, Thomas, Frank Puschmann und Harald Wertz. 2011. Hardware-in-the-loop-Simulation für elektrische Antriebssysteme. In: Elektrische Automatisierung - Systeme und Komponenten : SPS/IPC/Drives 2010, Fachmesse & Kongress, 23. - 25. Nov. 2010, Nürnberg ; [Tagungsband] , 215–223. Berlin: VDE-Verlag.","din1505-2-1":"Schulte, Thomas ; Puschmann, Frank ; Wertz, Harald: Hardware-in-the-loop-Simulation für elektrische Antriebssysteme. In: Elektrische Automatisierung - Systeme und Komponenten : SPS/IPC/Drives 2010, Fachmesse & Kongress, 23. - 25. Nov. 2010, Nürnberg ; [Tagungsband] . Berlin : VDE-Verlag, 2011, S. 215–223","short":"T. Schulte, F. Puschmann, H. Wertz, in: Elektrische Automatisierung - Systeme und Komponenten : SPS/IPC/Drives 2010, Fachmesse & Kongress, 23. - 25. Nov. 2010, Nürnberg ; [Tagungsband] , VDE-Verlag, Berlin, 2011, pp. 215–223.","mla":"Schulte, Thomas, et al. “Hardware-in-the-loop-Simulation für elektrische Antriebssysteme.” Elektrische Automatisierung - Systeme und Komponenten : SPS/IPC/Drives 2010, Fachmesse & Kongress, 23. - 25. Nov. 2010, Nürnberg ; [Tagungsband] , VDE-Verlag, 2011, pp. 215–23.","havard":"T. Schulte, F. Puschmann, H. Wertz, Hardware-in-the-loop-Simulation für elektrische Antriebssysteme, in: Elektrische Automatisierung - Systeme und Komponenten : SPS/IPC/Drives 2010, Fachmesse & Kongress, 23. - 25. Nov. 2010, Nürnberg ; [Tagungsband] , VDE-Verlag, Berlin, 2011: pp. 215–223.","bjps":"Schulte T, Puschmann F and Wertz H (2011) Hardware-in-the-loop-Simulation für elektrische Antriebssysteme. Elektrische Automatisierung - Systeme und Komponenten : SPS/IPC/Drives 2010, Fachmesse & Kongress, 23. - 25. Nov. 2010, Nürnberg ; [Tagungsband] . Berlin: VDE-Verlag, pp. 215–223.","ufg":"Schulte, Thomas et. al. (2011): Hardware-in-the-loop-Simulation für elektrische Antriebssysteme, in: Elektrische Automatisierung - Systeme und Komponenten : SPS/IPC/Drives 2010, Fachmesse & Kongress, 23. - 25. Nov. 2010, Nürnberg ; [Tagungsband] , Berlin, S. 215–223.","van":"Schulte T, Puschmann F, Wertz H. Hardware-in-the-loop-Simulation für elektrische Antriebssysteme. In: Elektrische Automatisierung - Systeme und Komponenten : SPS/IPC/Drives 2010, Fachmesse & Kongress, 23 - 25 Nov 2010, Nürnberg ; [Tagungsband] . Berlin: VDE-Verlag; 2011. p. 215–23.","chicago":"Schulte, Thomas, Frank Puschmann, and Harald Wertz. “Hardware-in-the-loop-Simulation für elektrische Antriebssysteme.” In Elektrische Automatisierung - Systeme und Komponenten : SPS/IPC/Drives 2010, Fachmesse & Kongress, 23. - 25. Nov. 2010, Nürnberg ; [Tagungsband] , 215–23. Berlin: VDE-Verlag, 2011.","apa":"Schulte, T., Puschmann, F., & Wertz, H. (2011). Hardware-in-the-loop-Simulation für elektrische Antriebssysteme. In Elektrische Automatisierung - Systeme und Komponenten : SPS/IPC/Drives 2010, Fachmesse & Kongress, 23. - 25. Nov. 2010, Nürnberg ; [Tagungsband] (pp. 215–223). Berlin: VDE-Verlag."},"author":[{"first_name":"Thomas","last_name":"Schulte","full_name":"Schulte, Thomas","id":"46242"},{"last_name":"Puschmann","full_name":"Puschmann, Frank","first_name":"Frank"},{"full_name":"Wertz, Harald","first_name":"Harald","last_name":"Wertz"}],"year":2011,"page":"215 - 223","status":"public","date_created":"2020-11-24T10:22:52Z","publication_identifier":{"isbn":[" 9783800733125"]},"publication":"Elektrische Automatisierung - Systeme und Komponenten : SPS/IPC/Drives 2010, Fachmesse & Kongress, 23. - 25. Nov. 2010, Nürnberg ; [Tagungsband] ","file_date_updated":"2020-11-24T10:30:50Z","date_updated":"2023-03-15T13:49:50Z","language":[{"iso":"ger"}],"publication_status":"published","file":[{"file_name":"maas_hardware.pdf","content_type":"application/pdf","date_created":"2020-11-24T10:30:50Z","file_size":1229626,"file_id":"4046","date_updated":"2020-11-24T10:30:50Z","creator":"czr-e2t","relation":"main_file","access_level":"local"}],"abstract":[{"text":"Moderne Industrieantriebe beinhalten unterschiedliche durch den Benutzer konfigurierbare Funktionen. Darüber hinaus sind mit lediglich einer Typenserie eine bemerkenswerte Zahl von Kombinationen aus Leistungsendstufen. Motoren, Sensoren und Kommunikationsschnittstellen mögHch. Trotzdem werden heute sehr hohe Anforderungen an die Zuverlässigkeit und Sicherheit der Systeme gestellt. wobei die dazu notwendigen umfangreichen Tests des vollständigen Funktionsumfangs unter unterschiedlichen Randbedingungen extrem zeit-und kostenintensiv sind. Die Hardware-in-the-Loop-Simulation (HIL) wird bereits seit mehreren Jahren erfolgreich für Tests automotiver Steuergeräte eingesetzt und kann auch im Bereich der industriellen Antriebstechnik zu einer signifikanten Kostensenkung beitragen. HIL-Simulation ermöglicht automatisiertes Testen mit reproduzierbaren, zuverlässigen Ergebnissen. Das modellbasierte Testen eröffnet außerdem eine gegenüber mechanischen Prüfständen extrem hohe Flexibilität und ermöglicht Tests in ansonsten kritischen Betriebszuständen. Dieser Beitrag stellt unterschiedliche Vorgehensweisen für die Hardware-in-theLoop- Simulation von elektrischen Antrieben dar. die bei den notwendigen Tests eine effiziente Kostensenkung ermöglichen. Sie werden bereits erfolgreich für automotive Anwendungen wie z. B. Hybrid-Fahrzeuge eingesetzt. lassen sich aber auch sehr gut auf Industrieantriebe übertragen.","lang":"ger"}],"conference":{"name":"SPS/IPC/Drives 2010, Fachmesse & Kongress","location":"Nürnberg","start_date":"2010-11-23","end_date":"2010-11-25"},"department":[{"_id":"DEP6020"}],"ddc":["600"],"publisher":"VDE-Verlag","type":"book_chapter","user_id":"74004","alternative_title":["Hardware-in-fhe-Loop-Simulation for electric Drives"],"has_accepted_license":"1","_id":"4045","place":"Berlin"},{"year":2011,"ddc":["620"],"author":[{"last_name":"Schulte","full_name":"Schulte, Thomas","id":"46242","first_name":"Thomas"},{"full_name":"Kauczor, Christopher","last_name":"Kauczor","first_name":"Christopher"},{"full_name":"Grotstollen, Horst","first_name":"Horst","last_name":"Grotstollen"}],"department":[{"_id":"DEP6020"}],"abstract":[{"text":"Die Nutzung früher Patente zur elektrisch/elektrischen Energieumwandlung mittels piezoelektrischen Effekts (z. B. Rosen-Transformator, 1958, s [1]) scheiterte letzlich an den fehlenden technologischen Voraussetzungen sowohl seitens der piezoelektrischen Werkstoffe als auch seitens der leistungselektronischen Bauelemente für hohe Schaltfrequenzen. Erst seit Mitte der 80er-Jahre konnten mit PZT-Keramiken (PZT: BLeizironat-Titanit) erflogreich piezowlektrische Transformatoren entwickelt werden. und seit etwa der Mitteder 90er Jahre angewendet werden. Durch die intensive Forschung und Weiterentwicklung im Bereich der piezoelektrischen Wandler sowie im Bereich der Leistungselektronik und ihrer Komponenten erscheinen pizoelektrische Transformatoren heute bei einer Vielzahl von typischen leistungselektronischen Anwendungen als geeingnete Alternative zu herkömmlichen Transformatoren. Dieser Aufastz beinhaltet eine Zusammenfassung des Stades der Technik und Entwicklungsperspektiven piezoelektrischer Transformatoren aus leistungselektrischer Sicht.","lang":"ger"}],"status":"public","title":"Piezoelektrische Transformatoren- Schaltungen und Anwendungen","citation":{"din1505-2-1":"Schulte, Thomas ; Kauczor, Christopher ; Grotstollen, Horst: Piezoelektrische Transformatoren- Schaltungen und Anwendungen. In: , 2011","chicago-de":"Schulte, Thomas, Christopher Kauczor und Horst Grotstollen. 2011. Piezoelektrische Transformatoren- Schaltungen und Anwendungen. In: .","short":"T. Schulte, C. Kauczor, H. Grotstollen, in: 2011.","ufg":"Schulte, Thomas et. al. (2011): Piezoelektrische Transformatoren- Schaltungen und Anwendungen, in: .","havard":"T. Schulte, C. Kauczor, H. Grotstollen, Piezoelektrische Transformatoren- Schaltungen und Anwendungen, in: 2011.","bjps":"Schulte T, Kauczor C and Grotstollen H (2011) Piezoelektrische Transformatoren- Schaltungen Und Anwendungen.","mla":"Schulte, Thomas, et al. Piezoelektrische Transformatoren- Schaltungen Und Anwendungen. 2011.","van":"Schulte T, Kauczor C, Grotstollen H. Piezoelektrische Transformatoren- Schaltungen und Anwendungen. In 2011.","ama":"Schulte T, Kauczor C, Grotstollen H. Piezoelektrische Transformatoren- Schaltungen und Anwendungen. In: ; 2011.","chicago":"Schulte, Thomas, Christopher Kauczor, and Horst Grotstollen. “Piezoelektrische Transformatoren- Schaltungen Und Anwendungen,” 2011.","apa":"Schulte, T., Kauczor, C., & Grotstollen, H. (2011). Piezoelektrische Transformatoren- Schaltungen und Anwendungen.","ieee":"T. Schulte, C. Kauczor, and H. Grotstollen, “Piezoelektrische Transformatoren- Schaltungen und Anwendungen,” 2011."},"file":[{"file_id":"4069","file_size":1340255,"access_level":"local","date_created":"2020-11-24T11:50:13Z","file_name":"schulte_piezo.pdf","content_type":"application/pdf","creator":"czr-e2t","relation":"main_file","date_updated":"2020-11-24T11:50:13Z"}],"has_accepted_license":"1","language":[{"iso":"eng"}],"_id":"4068","date_created":"2020-11-24T11:46:02Z","type":"conference","user_id":"74004","date_updated":"2023-03-15T13:49:50Z","file_date_updated":"2020-11-24T11:50:13Z"},{"title":"Verfahren und Schaltung für den mehrphasigen Betrieb eines Elektromotors","citation":{"short":"J. Austermann, H. Borcherding, (2011).","chicago-de":"Austermann, Johann und Holger Borcherding. 2011. Verfahren und Schaltung für den mehrphasigen Betrieb eines Elektromotors.","din1505-2-1":"Austermann, Johann ; Borcherding, Holger: Verfahren und Schaltung für den mehrphasigen Betrieb eines Elektromotors (2011)","ama":"Austermann J, Borcherding H. Verfahren und Schaltung für den mehrphasigen Betrieb eines Elektromotors. 2011.","van":"Austermann J, Borcherding H. Verfahren und Schaltung für den mehrphasigen Betrieb eines Elektromotors. 2011.","bjps":"Austermann J and Borcherding H (2011) Verfahren Und Schaltung Für Den Mehrphasigen Betrieb Eines Elektromotors.","havard":"J. Austermann, H. Borcherding, Verfahren und Schaltung für den mehrphasigen Betrieb eines Elektromotors, (2011).","mla":"Austermann, Johann, and Holger Borcherding. Verfahren Und Schaltung Für Den Mehrphasigen Betrieb Eines Elektromotors. 2011.","ufg":"Austermann, Johann/Borcherding, Holger (2011): Verfahren und Schaltung für den mehrphasigen Betrieb eines Elektromotors.","ieee":"J. Austermann and H. Borcherding, “Verfahren und Schaltung für den mehrphasigen Betrieb eines Elektromotors.” 2011.","apa":"Austermann, J., & Borcherding, H. (2011). Verfahren und Schaltung für den mehrphasigen Betrieb eines Elektromotors.","chicago":"Austermann, Johann, and Holger Borcherding. “Verfahren Und Schaltung Für Den Mehrphasigen Betrieb Eines Elektromotors,” 2011."},"author":[{"first_name":"Johann","last_name":"Austermann","full_name":"Austermann, Johann","id":"42114"},{"last_name":"Borcherding","full_name":"Borcherding, Holger","id":"1693","first_name":"Holger"}],"year":2011,"department":[{"_id":"DEP6020"}],"publication_date":"2011-08-09","status":"public","type":"patent","date_created":"2020-12-09T11:49:08Z","user_id":"74004","date_updated":"2023-03-15T13:49:51Z","ipc":"B60L7/14","ipn":"DE112012003284A5","_id":"4211"},{"year":2011,"author":[{"last_name":"Balzer","first_name":"E.","full_name":"Balzer, E."},{"id":"1693","full_name":"Borcherding, Holger","first_name":"Holger","last_name":"Borcherding"},{"first_name":"H.","full_name":"Garbe, H.","last_name":"Garbe"}],"department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"conference":{"name":"EMC Europe 2011","location":"York, Groß-Britannien"},"status":"public","title":"The influence of the control of an Active Front End on the conducted emission","citation":{"ama":"Balzer E, Borcherding H, Garbe H. The influence of the control of an Active Front End on the conducted emission. In: ; 2011.","ieee":"E. Balzer, H. Borcherding, and H. Garbe, “The influence of the control of an Active Front End on the conducted emission,” presented at the EMC Europe 2011, York, Groß-Britannien, 2011.","ufg":"Balzer, E. et. al. (2011): The influence of the control of an Active Front End on the conducted emission, in: .","havard":"E. Balzer, H. Borcherding, H. Garbe, The influence of the control of an Active Front End on the conducted emission, in: 2011.","mla":"Balzer, E., et al. The Influence of the Control of an Active Front End on the Conducted Emission. 2011.","bjps":"Balzer E, Borcherding H and Garbe H (2011) The Influence of the Control of an Active Front End on the Conducted Emission.","van":"Balzer E, Borcherding H, Garbe H. The influence of the control of an Active Front End on the conducted emission. In 2011.","chicago":"Balzer, E., Holger Borcherding, and H. Garbe. “The Influence of the Control of an Active Front End on the Conducted Emission,” 2011.","apa":"Balzer, E., Borcherding, H., & Garbe, H. (2011). The influence of the control of an Active Front End on the conducted emission. Presented at the EMC Europe 2011, York, Groß-Britannien.","chicago-de":"Balzer, E., Holger Borcherding und H. Garbe. 2011. The influence of the control of an Active Front End on the conducted emission. In: .","din1505-2-1":"Balzer, E. ; Borcherding, Holger ; Garbe, H.: The influence of the control of an Active Front End on the conducted emission. In: , 2011","short":"E. Balzer, H. Borcherding, H. Garbe, in: 2011."},"language":[{"iso":"eng"}],"_id":"4277","type":"conference_abstract","date_created":"2020-12-14T11:05:51Z","user_id":"74004","date_updated":"2023-03-15T13:49:51Z"},{"publication_status":"published","citation":{"chicago-de":"Borcherding, Holger und T. Hohnsbein. 2011. Energieeffizienz : Getriebebehafteter oder -loser Antrieb in der Fördertechnik. In: SPS/IPC/DRIVES 2011 : Elektrische Automatisierung - Systeme und Komponenten, hg. von K. Bender, 491–500. München: VDE-Verlag.","din1505-2-1":"Borcherding, Holger ; Hohnsbein, T.: Energieeffizienz : Getriebebehafteter oder -loser Antrieb in der Fördertechnik. In: Bender, K. (Hrsg.): SPS/IPC/DRIVES 2011 : Elektrische Automatisierung - Systeme und Komponenten. München : VDE-Verlag, 2011, S. 491–500","short":"H. Borcherding, T. Hohnsbein, in: K. Bender (Ed.), SPS/IPC/DRIVES 2011 : Elektrische Automatisierung - Systeme und Komponenten, VDE-Verlag, München, 2011, pp. 491–500.","ufg":"Borcherding, Holger/Hohnsbein, T. (2011): Energieeffizienz : Getriebebehafteter oder -loser Antrieb in der Fördertechnik, in: K. Bender (Hg.): SPS/IPC/DRIVES 2011 : Elektrische Automatisierung - Systeme und Komponenten, München, S. 491–500.","bjps":"Borcherding H and Hohnsbein T (2011) Energieeffizienz : Getriebebehafteter oder -loser Antrieb in der Fördertechnik. In Bender K (ed.), SPS/IPC/DRIVES 2011 : Elektrische Automatisierung - Systeme und Komponenten. München: VDE-Verlag, pp. 491–500.","havard":"H. Borcherding, T. Hohnsbein, Energieeffizienz : Getriebebehafteter oder -loser Antrieb in der Fördertechnik, in: K. Bender (Ed.), SPS/IPC/DRIVES 2011 : Elektrische Automatisierung - Systeme und Komponenten, VDE-Verlag, München, 2011: pp. 491–500.","mla":"Borcherding, Holger, and T. Hohnsbein. “Energieeffizienz : Getriebebehafteter oder -loser Antrieb in der Fördertechnik.” SPS/IPC/DRIVES 2011 : Elektrische Automatisierung - Systeme und Komponenten, edited by K. Bender, VDE-Verlag, 2011, pp. 491–500.","van":"Borcherding H, Hohnsbein T. Energieeffizienz : Getriebebehafteter oder -loser Antrieb in der Fördertechnik. In: Bender K, editor. SPS/IPC/DRIVES 2011 : Elektrische Automatisierung - Systeme und Komponenten. München: VDE-Verlag; 2011. p. 491–500.","chicago":"Borcherding, Holger, and T. Hohnsbein. “Energieeffizienz : Getriebebehafteter oder -loser Antrieb in der Fördertechnik.” In SPS/IPC/DRIVES 2011 : Elektrische Automatisierung - Systeme und Komponenten, edited by K. Bender, 491–500. München: VDE-Verlag, 2011.","apa":"Borcherding, H., & Hohnsbein, T. (2011). Energieeffizienz : Getriebebehafteter oder -loser Antrieb in der Fördertechnik. In K. Bender (Ed.), SPS/IPC/DRIVES 2011 : Elektrische Automatisierung - Systeme und Komponenten (pp. 491–500). München: VDE-Verlag.","ama":"Borcherding H, Hohnsbein T. Energieeffizienz : Getriebebehafteter oder -loser Antrieb in der Fördertechnik. In: Bender K, ed. SPS/IPC/DRIVES 2011 : Elektrische Automatisierung - Systeme und Komponenten. München: VDE-Verlag; 2011:491-500.","ieee":"H. Borcherding and T. Hohnsbein, “Energieeffizienz : Getriebebehafteter oder -loser Antrieb in der Fördertechnik,” in SPS/IPC/DRIVES 2011 : Elektrische Automatisierung - Systeme und Komponenten, Nürnberg, 2011, pp. 491–500."},"title":"Energieeffizienz : Getriebebehafteter oder -loser Antrieb in der Fördertechnik","page":"491 - 500","status":"public","publisher":"VDE-Verlag","department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"conference":{"name":"SPS/IPC/DRIVES 2011","location":"Nürnberg","end_date":"2011-11-24","start_date":"2011-11-22"},"year":2011,"author":[{"full_name":"Borcherding, Holger","id":"1693","first_name":"Holger","last_name":"Borcherding"},{"first_name":"T.","full_name":"Hohnsbein, T.","last_name":"Hohnsbein"}],"date_updated":"2023-03-15T13:49:51Z","user_id":"74004","editor":[{"full_name":"Bender, K.","first_name":"K.","last_name":"Bender"}],"date_created":"2020-12-14T11:14:38Z","type":"conference","publication_identifier":{"isbn":["978-3800733798"]},"publication":"SPS/IPC/DRIVES 2011 : Elektrische Automatisierung - Systeme und Komponenten","language":[{"iso":"ger"}],"place":"München","_id":"4278"},{"intvolume":" 7040","user_id":"15514","type":"conference","_id":"4479","doi":"10.1007/978-3-642-25167-2_51","place":"Berlin","publication_status":"published","series_title":" Lecture Notes in Computer Science ","publisher":"Springer","abstract":[{"text":"This paper reports on the first international workshop on Aesthetic Intelligence. The focus of the workshop is on the relevance of beauty and aesthetic values for Ambient Intelligence and the meaning of aesthetically pleasing design for usability, technology acceptance, and well-being in technology-enhanced spaces.","lang":"eng"}],"conference":{"location":"Amsterdam, The Netherlands","name":"Second International Joint Conference on AmI ","start_date":"2011-11-16","end_date":"2011-11-18"},"department":[{"_id":"DEP5023"}],"editor":[{"first_name":"David V. ","last_name":"Keyson","full_name":"Keyson, David V. "},{"last_name":"Maher","full_name":"Maher, Mary Lou ","first_name":"Mary Lou "},{"first_name":"Norbert ","last_name":"Streitz","full_name":"Streitz, Norbert "},{"first_name":"Adrian ","full_name":"Cheok, Adrian ","last_name":"Cheok"},{"full_name":"Augusto, Juan Carlos ","last_name":"Augusto","first_name":"Juan Carlos "}],"date_updated":"2023-03-15T13:49:53Z","publication_identifier":{"isbn":["978-3-642-25166-5"],"eisbn":["978-3-642-25167-2"]},"publication":"Ambient Intelligence","date_created":"2021-01-20T13:39:12Z","keyword":["Ambient Intelligence","Ubiquitous Computing","Smart Spaces","Aesthetics","Design","Architecture","Urban Informatics"],"language":[{"iso":"eng"}],"oa":"1","volume":7040,"citation":{"ieee":"K. Kasugai, C. Röcker, B. Bongers, D. Plewe, and C. Dimmer, “Aesthetic Intelligence: Designing Smart and Beautiful Architectural Spaces,” in Ambient Intelligence, Amsterdam, The Netherlands, 2011, vol. 7040, pp. 360–361.","ama":"Kasugai K, Röcker C, Bongers B, Plewe D, Dimmer C. Aesthetic Intelligence: Designing Smart and Beautiful Architectural Spaces. In: Keyson DV, Maher ML, Streitz N, Cheok A, Augusto JC, eds. Ambient Intelligence. Vol 7040. Lecture Notes in Computer Science . Berlin: Springer; 2011:360-361. doi:10.1007/978-3-642-25167-2_51","din1505-2-1":"Kasugai, Kai ; Röcker, Carsten ; Bongers, Bert ; Plewe, Daniela ; Dimmer, Christian: Aesthetic Intelligence: Designing Smart and Beautiful Architectural Spaces. In: Keyson, D. V. ; Maher, M. L. ; Streitz, N. ; Cheok, A. ; Augusto, J. C. (Hrsg.): Ambient Intelligence, Lecture Notes in Computer Science . Bd. 7040. Berlin : Springer, 2011, S. 360–361","chicago-de":"Kasugai, Kai, Carsten Röcker, Bert Bongers, Daniela Plewe und Christian Dimmer. 2011. Aesthetic Intelligence: Designing Smart and Beautiful Architectural Spaces. In: Ambient Intelligence, hg. von David V. Keyson, Mary Lou Maher, Norbert Streitz, Adrian Cheok, und Juan Carlos Augusto, 7040:360–361. Lecture Notes in Computer Science . Berlin: Springer. doi:10.1007/978-3-642-25167-2_51, .","short":"K. Kasugai, C. Röcker, B. Bongers, D. Plewe, C. Dimmer, in: D.V. Keyson, M.L. Maher, N. Streitz, A. Cheok, J.C. Augusto (Eds.), Ambient Intelligence, Springer, Berlin, 2011, pp. 360–361.","chicago":"Kasugai, Kai, Carsten Röcker, Bert Bongers, Daniela Plewe, and Christian Dimmer. “Aesthetic Intelligence: Designing Smart and Beautiful Architectural Spaces.” In Ambient Intelligence, edited by David V. Keyson, Mary Lou Maher, Norbert Streitz, Adrian Cheok, and Juan Carlos Augusto, 7040:360–61. Lecture Notes in Computer Science . Berlin: Springer, 2011. https://doi.org/10.1007/978-3-642-25167-2_51.","apa":"Kasugai, K., Röcker, C., Bongers, B., Plewe, D., & Dimmer, C. (2011). Aesthetic Intelligence: Designing Smart and Beautiful Architectural Spaces. In D. V. Keyson, M. L. Maher, N. Streitz, A. Cheok, & J. C. Augusto (Eds.), Ambient Intelligence (Vol. 7040, pp. 360–361). Berlin: Springer. https://doi.org/10.1007/978-3-642-25167-2_51","bjps":"Kasugai K et al. (2011) Aesthetic Intelligence: Designing Smart and Beautiful Architectural Spaces. In Keyson DV et al. (eds), Ambient Intelligence, vol. 7040. Berlin: Springer, pp. 360–361.","havard":"K. Kasugai, C. Röcker, B. Bongers, D. Plewe, C. Dimmer, Aesthetic Intelligence: Designing Smart and Beautiful Architectural Spaces, in: D.V. Keyson, M.L. Maher, N. Streitz, A. Cheok, J.C. Augusto (Eds.), Ambient Intelligence, Springer, Berlin, 2011: pp. 360–361.","mla":"Kasugai, Kai, et al. “Aesthetic Intelligence: Designing Smart and Beautiful Architectural Spaces.” Ambient Intelligence, edited by David V. Keyson et al., vol. 7040, Springer, 2011, pp. 360–61, doi:10.1007/978-3-642-25167-2_51.","ufg":"Kasugai, Kai et. al. (2011): Aesthetic Intelligence: Designing Smart and Beautiful Architectural Spaces, in: David V. Keyson et. al. (Hgg.): Ambient Intelligence (= Lecture Notes in Computer Science 7040), Berlin, S. 360–361.","van":"Kasugai K, Röcker C, Bongers B, Plewe D, Dimmer C. Aesthetic Intelligence: Designing Smart and Beautiful Architectural Spaces. In: Keyson DV, Maher ML, Streitz N, Cheok A, Augusto JC, editors. Ambient Intelligence. Berlin: Springer; 2011. p. 360–1. ( Lecture Notes in Computer Science ; vol. 7040)."},"title":"Aesthetic Intelligence: Designing Smart and Beautiful Architectural Spaces","extern":"1","status":"public","page":" 360-361","author":[{"full_name":"Kasugai, Kai","last_name":"Kasugai","first_name":"Kai"},{"id":"61525","first_name":"Carsten","full_name":"Röcker, Carsten","last_name":"Röcker"},{"first_name":"Bert","full_name":"Bongers, Bert","last_name":"Bongers"},{"last_name":"Plewe","full_name":"Plewe, Daniela","first_name":"Daniela"},{"last_name":"Dimmer","full_name":"Dimmer, Christian","first_name":"Christian"}],"year":2011,"main_file_link":[{"open_access":"1"}]},{"intvolume":" 1","user_id":"15514","type":"conference","_id":"4480","publication_status":"published","abstract":[{"text":"Traditionally, Ambient Assisted Living applications focus on health-related services, like the detection of emergency situations, long-term treatment of chronic diseases, or the prevention and early-detection of illnesses. Over the last years, more and more projects started to extend these classical healthcare scenarios by designing applications that explicitly aim at increasing well-being and social inclusion for elderly users. With the transition away from purely medical services towards integrated homecare environments, holistic design concepts and evaluation approaches will become necessary. This paper takes a detailed look at state-of-the-art applications in this field and illustrates emerging challenges for the design and development of future homecare systems.","lang":"eng"}],"conference":{"start_date":"2011-07-18","end_date":"2018-07-20","location":"Las Vegas, NV, USA","name":"International Conference on Artificial Intelligence (ICAI'11)"},"department":[{"_id":"DEP5023"}],"related_material":{"link":[{"relation":"research_paper","url":"https://www.researchgate.net/profile/Martina_Ziefle/publication/228415622_Social_Inclusion_in_Ambient_Assisted_Living_Environments_Home_Automation_and_Convenience_Services_for_Elderly_User/links/02bfe5128fa7f52cad000000/Social-Inclusion-in-Ambient-Assisted-Living-Environments-Home-Automation-and-Convenience-Services-for-Elderly-User.pdf"}]},"date_updated":"2023-03-15T13:49:53Z","publication":"Proceedings of the International Conference on Artificial Intelligence (ICAI'11)","date_created":"2021-01-20T13:39:13Z","keyword":["Ambient Assisted Living","Ambient Intelligence","Ubiquitous and Pervasive Computing","Social Inclusion","Older User"],"language":[{"iso":"eng"}],"oa":"1","citation":{"ufg":"Röcker, Carsten et. al. (2011): Social Inclusion in AAL Environments: Home Automation and Convenience Services for Elderly Users, in: Proceedings of the International Conference on Artificial Intelligence (ICAI’11) (= 1), S. 55–59.","mla":"Röcker, Carsten, et al. “Social Inclusion in AAL Environments: Home Automation and Convenience Services for Elderly Users.” Proceedings of the International Conference on Artificial Intelligence (ICAI’11), vol. 1, 2011, pp. 55–59.","havard":"C. Röcker, M. Ziefle, A. Holzinger, Social Inclusion in AAL Environments: Home Automation and Convenience Services for Elderly Users, in: Proceedings of the International Conference on Artificial Intelligence (ICAI’11), 2011: pp. 55–59.","bjps":"Röcker C, Ziefle M and Holzinger A (2011) Social Inclusion in AAL Environments: Home Automation and Convenience Services for Elderly Users. Proceedings of the International Conference on Artificial Intelligence (ICAI’11), vol. 1. pp. 55–59.","van":"Röcker C, Ziefle M, Holzinger A. Social Inclusion in AAL Environments: Home Automation and Convenience Services for Elderly Users. In: Proceedings of the International Conference on Artificial Intelligence (ICAI’11). 2011. p. 55–9.","ama":"Röcker C, Ziefle M, Holzinger A. Social Inclusion in AAL Environments: Home Automation and Convenience Services for Elderly Users. In: Proceedings of the International Conference on Artificial Intelligence (ICAI’11). Vol 1. ; 2011:55-59.","chicago":"Röcker, Carsten, Martina Ziefle, and Andreas Holzinger. “Social Inclusion in AAL Environments: Home Automation and Convenience Services for Elderly Users.” In Proceedings of the International Conference on Artificial Intelligence (ICAI’11), 1:55–59, 2011.","apa":"Röcker, C., Ziefle, M., & Holzinger, A. (2011). Social Inclusion in AAL Environments: Home Automation and Convenience Services for Elderly Users. In Proceedings of the International Conference on Artificial Intelligence (ICAI’11) (Vol. 1, pp. 55–59). Las Vegas, NV, USA.","ieee":"C. Röcker, M. Ziefle, and A. Holzinger, “Social Inclusion in AAL Environments: Home Automation and Convenience Services for Elderly Users,” in Proceedings of the International Conference on Artificial Intelligence (ICAI’11), Las Vegas, NV, USA, 2011, vol. 1, pp. 55–59.","din1505-2-1":"Röcker, Carsten ; Ziefle, Martina ; Holzinger, Andreas: Social Inclusion in AAL Environments: Home Automation and Convenience Services for Elderly Users. In: Proceedings of the International Conference on Artificial Intelligence (ICAI’11). Bd. 1, 2011, S. 55–59","chicago-de":"Röcker, Carsten, Martina Ziefle und Andreas Holzinger. 2011. Social Inclusion in AAL Environments: Home Automation and Convenience Services for Elderly Users. In: Proceedings of the International Conference on Artificial Intelligence (ICAI’11), 1:55–59.","short":"C. Röcker, M. Ziefle, A. Holzinger, in: Proceedings of the International Conference on Artificial Intelligence (ICAI’11), 2011, pp. 55–59."},"volume":1,"title":"Social Inclusion in AAL Environments: Home Automation and Convenience Services for Elderly Users","extern":"1","status":"public","page":"55-59","main_file_link":[{"open_access":"1"}],"year":2011,"author":[{"id":"61525","first_name":"Carsten","last_name":"Röcker","full_name":"Röcker, Carsten"},{"last_name":"Ziefle","full_name":"Ziefle, Martina","first_name":"Martina"},{"last_name":"Holzinger","full_name":"Holzinger, Andreas","first_name":"Andreas"}]},{"publication_status":"published","abstract":[{"text":"This paper reports on a study exploring the attitudes of users towards video-based monitoring systems for long-term care of elderly or disabled people in smart home environments. The focus of the study was on investigating the willingness of users to accept medical technology in their homes and the specific conditions under which continuous monitoring would be acceptable. Using the questionnaire method, a total of 165 users (17-95 years) were examined regarding privacy, intimacy and trust issues for medical technology in homes. The results highlight trust and privacy as central requirements, especially when implemented within private spaces. The reported concerns were mostly insensitive to gender and age. Overall, it was revealed that acceptance issues and users' needs and wants should be seriously considered in order to successfully design new medical technologies.","lang":"eng"}],"department":[{"_id":"DEP5023"}],"conference":{"end_date":"201107-22","start_date":"2011-07-18","name":" 35th Annual Computer Software and Applications Conference Workshops","location":"Munich, Germany "},"publisher":"IEEE","type":"conference","user_id":"15514","_id":"4481","doi":"10.1109/COMPSACW.2011.75","place":"Piscataway, NJ","title":"Medical Technology in Smart Homes: Exploring the User’s Perspective on Privacy, Intimacy and Trust","extern":"1","citation":{"short":"M. Ziefle, C. Röcker, A. Holzinger, in: Proceedings of the IEEE 35th Annual Computer Software and Applications Conference Workshops (COMPSACW’11), IEEE, Piscataway, NJ, 2011, pp. 410–415.","din1505-2-1":"Ziefle, Martina ; Röcker, Carsten ; Holzinger, Andreas: Medical Technology in Smart Homes: Exploring the User’s Perspective on Privacy, Intimacy and Trust. In: Proceedings of the IEEE 35th Annual Computer Software and Applications Conference Workshops (COMPSACW’11). Piscataway, NJ : IEEE, 2011, S. 410–415","chicago-de":"Ziefle, Martina, Carsten Röcker und Andreas Holzinger. 2011. Medical Technology in Smart Homes: Exploring the User’s Perspective on Privacy, Intimacy and Trust. In: Proceedings of the IEEE 35th Annual Computer Software and Applications Conference Workshops (COMPSACW’11), 410–415. Piscataway, NJ: IEEE. doi:10.1109/COMPSACW.2011.75, .","ieee":"M. Ziefle, C. Röcker, and A. Holzinger, “Medical Technology in Smart Homes: Exploring the User’s Perspective on Privacy, Intimacy and Trust,” in Proceedings of the IEEE 35th Annual Computer Software and Applications Conference Workshops (COMPSACW’11), Munich, Germany , 2011, pp. 410–415.","apa":"Ziefle, M., Röcker, C., & Holzinger, A. (2011). Medical Technology in Smart Homes: Exploring the User’s Perspective on Privacy, Intimacy and Trust. In Proceedings of the IEEE 35th Annual Computer Software and Applications Conference Workshops (COMPSACW’11) (pp. 410–415). Piscataway, NJ: IEEE. https://doi.org/10.1109/COMPSACW.2011.75","chicago":"Ziefle, Martina, Carsten Röcker, and Andreas Holzinger. “Medical Technology in Smart Homes: Exploring the User’s Perspective on Privacy, Intimacy and Trust.” In Proceedings of the IEEE 35th Annual Computer Software and Applications Conference Workshops (COMPSACW’11), 410–15. Piscataway, NJ: IEEE, 2011. https://doi.org/10.1109/COMPSACW.2011.75.","ama":"Ziefle M, Röcker C, Holzinger A. Medical Technology in Smart Homes: Exploring the User’s Perspective on Privacy, Intimacy and Trust. In: Proceedings of the IEEE 35th Annual Computer Software and Applications Conference Workshops (COMPSACW’11). Piscataway, NJ: IEEE; 2011:410-415. doi:10.1109/COMPSACW.2011.75","van":"Ziefle M, Röcker C, Holzinger A. Medical Technology in Smart Homes: Exploring the User’s Perspective on Privacy, Intimacy and Trust. In: Proceedings of the IEEE 35th Annual Computer Software and Applications Conference Workshops (COMPSACW’11). Piscataway, NJ: IEEE; 2011. p. 410–5.","mla":"Ziefle, Martina, et al. “Medical Technology in Smart Homes: Exploring the User’s Perspective on Privacy, Intimacy and Trust.” Proceedings of the IEEE 35th Annual Computer Software and Applications Conference Workshops (COMPSACW’11), IEEE, 2011, pp. 410–15, doi:10.1109/COMPSACW.2011.75.","havard":"M. Ziefle, C. Röcker, A. Holzinger, Medical Technology in Smart Homes: Exploring the User’s Perspective on Privacy, Intimacy and Trust, in: Proceedings of the IEEE 35th Annual Computer Software and Applications Conference Workshops (COMPSACW’11), IEEE, Piscataway, NJ, 2011: pp. 410–415.","bjps":"Ziefle M, Röcker C and Holzinger A (2011) Medical Technology in Smart Homes: Exploring the User’s Perspective on Privacy, Intimacy and Trust. Proceedings of the IEEE 35th Annual Computer Software and Applications Conference Workshops (COMPSACW’11). Piscataway, NJ: IEEE, pp. 410–415.","ufg":"Ziefle, Martina et. al. (2011): Medical Technology in Smart Homes: Exploring the User’s Perspective on Privacy, Intimacy and Trust, in: Proceedings of the IEEE 35th Annual Computer Software and Applications Conference Workshops (COMPSACW’11), Piscataway, NJ, S. 410–415."},"year":2011,"main_file_link":[{"open_access":"1"}],"author":[{"first_name":"Martina","full_name":"Ziefle, Martina","last_name":"Ziefle"},{"id":"61525","first_name":"Carsten","last_name":"Röcker","full_name":"Röcker, Carsten"},{"full_name":"Holzinger, Andreas","last_name":"Holzinger","first_name":"Andreas"}],"status":"public","page":"410-415","publication":"Proceedings of the IEEE 35th Annual Computer Software and Applications Conference Workshops (COMPSACW'11)","publication_identifier":{"isbn":["9997-0-7695-4459--5"]},"date_created":"2021-01-20T13:39:15Z","date_updated":"2023-03-15T13:49:53Z","oa":"1","keyword":["Medical Technologiee","Smart Homese","Ambient Assisted Livinge","Technology Acceptance","User Study"],"language":[{"iso":"eng"}]},{"oa":"1","keyword":["demographic change","sustainable healthcare solutions","technology acceptance","user requirements","living lab research"],"language":[{"iso":"eng"}],"publication":"Proceedings of the Second International Conference on Sustainable Future for Human Security (Sustain’11). The 186th Symposium on Sustainable Humanosphere. October 8-10, 2011, Kyoto, Japan","date_created":"2021-01-20T13:39:16Z","date_updated":"2023-03-15T13:49:53Z","related_material":{"link":[{"url":"https://www.researchgate.net/profile/Carsten_Roecker/publication/265375814_Towards_Sustainable_Homecare_Solutions_for_an_Aging_Society/links/5409d5cc0cf2d8daaabf98f7/Towards-Sustainable-Homecare-Solutions-for-an-Aging-Society.pdf","relation":"research_paper"}]},"year":2011,"author":[{"full_name":"Röcker, Carsten","last_name":"Röcker","id":"61525","first_name":"Carsten"},{"full_name":"Ziefle, Martina","first_name":"Martina","last_name":"Ziefle"}],"main_file_link":[{"open_access":"1"}],"status":"public","page":"663-666","title":"Towards Sustainable Homecare Solutions for an Aging Society","extern":"1","citation":{"ufg":"Röcker, Carsten/Ziefle, Martina (2011): Towards Sustainable Homecare Solutions for an Aging Society, in: Proceedings of the Second International Conference on Sustainable Future for Human Security (Sustain’11). The 186th Symposium on Sustainable Humanosphere. October 8-10, 2011, Kyoto, Japan, S. 663–666.","havard":"C. Röcker, M. Ziefle, Towards Sustainable Homecare Solutions for an Aging Society, in: Proceedings of the Second International Conference on Sustainable Future for Human Security (Sustain’11). The 186th Symposium on Sustainable Humanosphere. October 8-10, 2011, Kyoto, Japan, 2011: pp. 663–666.","mla":"Röcker, Carsten, and Martina Ziefle. “Towards Sustainable Homecare Solutions for an Aging Society.” Proceedings of the Second International Conference on Sustainable Future for Human Security (Sustain’11). The 186th Symposium on Sustainable Humanosphere. October 8-10, 2011, Kyoto, Japan, 2011, pp. 663–66.","bjps":"Röcker C and Ziefle M (2011) Towards Sustainable Homecare Solutions for an Aging Society. Proceedings of the Second International Conference on Sustainable Future for Human Security (Sustain’11). The 186th Symposium on Sustainable Humanosphere. October 8-10, 2011, Kyoto, Japan. pp. 663–666.","van":"Röcker C, Ziefle M. Towards Sustainable Homecare Solutions for an Aging Society. In: Proceedings of the Second International Conference on Sustainable Future for Human Security (Sustain’11) The 186th Symposium on Sustainable Humanosphere October 8-10, 2011, Kyoto, Japan. 2011. p. 663–6.","ama":"Röcker C, Ziefle M. Towards Sustainable Homecare Solutions for an Aging Society. In: Proceedings of the Second International Conference on Sustainable Future for Human Security (Sustain’11). The 186th Symposium on Sustainable Humanosphere. October 8-10, 2011, Kyoto, Japan. ; 2011:663-666.","chicago":"Röcker, Carsten, and Martina Ziefle. “Towards Sustainable Homecare Solutions for an Aging Society.” In Proceedings of the Second International Conference on Sustainable Future for Human Security (Sustain’11). The 186th Symposium on Sustainable Humanosphere. October 8-10, 2011, Kyoto, Japan, 663–66, 2011.","apa":"Röcker, C., & Ziefle, M. (2011). Towards Sustainable Homecare Solutions for an Aging Society. In Proceedings of the Second International Conference on Sustainable Future for Human Security (Sustain’11). The 186th Symposium on Sustainable Humanosphere. October 8-10, 2011, Kyoto, Japan (pp. 663–666). Kyoto, Japan.","ieee":"C. Röcker and M. Ziefle, “Towards Sustainable Homecare Solutions for an Aging Society,” in Proceedings of the Second International Conference on Sustainable Future for Human Security (Sustain’11). The 186th Symposium on Sustainable Humanosphere. October 8-10, 2011, Kyoto, Japan, Kyoto, Japan, 2011, pp. 663–666.","din1505-2-1":"Röcker, Carsten ; Ziefle, Martina: Towards Sustainable Homecare Solutions for an Aging Society. In: Proceedings of the Second International Conference on Sustainable Future for Human Security (Sustain’11). The 186th Symposium on Sustainable Humanosphere. October 8-10, 2011, Kyoto, Japan, 2011, S. 663–666","chicago-de":"Röcker, Carsten und Martina Ziefle. 2011. Towards Sustainable Homecare Solutions for an Aging Society. In: Proceedings of the Second International Conference on Sustainable Future for Human Security (Sustain’11). The 186th Symposium on Sustainable Humanosphere. October 8-10, 2011, Kyoto, Japan, 663–666.","short":"C. Röcker, M. Ziefle, in: Proceedings of the Second International Conference on Sustainable Future for Human Security (Sustain’11). The 186th Symposium on Sustainable Humanosphere. October 8-10, 2011, Kyoto, Japan, 2011, pp. 663–666."},"_id":"4482","type":"conference","user_id":"15514","department":[{"_id":"DEP5023"}],"conference":{"start_date":"2011-10-08","end_date":"2011-10-10","location":"Kyoto, Japan","name":"2nd International Conference on Sustainable Future for Human Security"},"abstract":[{"lang":"eng","text":"This paper discusses necessary steps and requirements for developing sustainable homecare technologies and illustrates the importance of a user-centered design approach for the long-term success of future care concepts."}],"publication_status":"published"},{"publication":"Electronic Proceedings of the ACM Conference of the Australian Computer-Human Interaction Special Interest Group (OZCHI’11), 4 pages","type":"conference","date_created":"2021-01-20T13:39:17Z","user_id":"15514","date_updated":"2023-03-15T13:49:53Z","related_material":{"link":[{"url":"https://www.researchgate.net/profile/Carsten_Roecker/publication/265375761_Designing_Privacy-Sensitive_Healthcare_Applications_for_the_Home_Domain/links/5409d4cd0cf2d8daaabf98dc/Designing-Privacy-Sensitive-Healthcare-Applications-for-the-Home-Domain.pdf","relation":"research_paper"}]},"oa":"1","keyword":["Ambient Assisted Living","Smart Healthcare Applictions","Intelligent Environments","Privacy"],"language":[{"iso":"eng"}],"_id":"4483","title":"Designing Privacy-Sensitive Healthcare Applications for the Home Domain","citation":{"ufg":"Röcker, Carsten/Ziefle, Martina (2011): Designing Privacy-Sensitive Healthcare Applications for the Home Domain, in: Electronic Proceedings of the ACM Conference of the Australian Computer-Human Interaction Special Interest Group (OZCHI’11), 4 pages.","bjps":"Röcker C and Ziefle M (2011) Designing Privacy-Sensitive Healthcare Applications for the Home Domain. Electronic Proceedings of the ACM Conference of the Australian Computer-Human Interaction Special Interest Group (OZCHI’11), 4 Pages.","havard":"C. Röcker, M. Ziefle, Designing Privacy-Sensitive Healthcare Applications for the Home Domain, in: Electronic Proceedings of the ACM Conference of the Australian Computer-Human Interaction Special Interest Group (OZCHI’11), 4 Pages, 2011.","mla":"Röcker, Carsten, and Martina Ziefle. “Designing Privacy-Sensitive Healthcare Applications for the Home Domain.” Electronic Proceedings of the ACM Conference of the Australian Computer-Human Interaction Special Interest Group (OZCHI’11), 4 Pages, 2011.","van":"Röcker C, Ziefle M. Designing Privacy-Sensitive Healthcare Applications for the Home Domain. In: Electronic Proceedings of the ACM Conference of the Australian Computer-Human Interaction Special Interest Group (OZCHI’11), 4 pages. 2011.","ama":"Röcker C, Ziefle M. Designing Privacy-Sensitive Healthcare Applications for the Home Domain. In: Electronic Proceedings of the ACM Conference of the Australian Computer-Human Interaction Special Interest Group (OZCHI’11), 4 Pages. ; 2011.","chicago":"Röcker, Carsten, and Martina Ziefle. “Designing Privacy-Sensitive Healthcare Applications for the Home Domain.” In Electronic Proceedings of the ACM Conference of the Australian Computer-Human Interaction Special Interest Group (OZCHI’11), 4 Pages, 2011.","apa":"Röcker, C., & Ziefle, M. (2011). Designing Privacy-Sensitive Healthcare Applications for the Home Domain. In Electronic Proceedings of the ACM Conference of the Australian Computer-Human Interaction Special Interest Group (OZCHI’11), 4 pages.","ieee":"C. Röcker and M. Ziefle, “Designing Privacy-Sensitive Healthcare Applications for the Home Domain,” in Electronic Proceedings of the ACM Conference of the Australian Computer-Human Interaction Special Interest Group (OZCHI’11), 4 pages, 2011.","chicago-de":"Röcker, Carsten und Martina Ziefle. 2011. Designing Privacy-Sensitive Healthcare Applications for the Home Domain. In: Electronic Proceedings of the ACM Conference of the Australian Computer-Human Interaction Special Interest Group (OZCHI’11), 4 pages.","din1505-2-1":"Röcker, Carsten ; Ziefle, Martina: Designing Privacy-Sensitive Healthcare Applications for the Home Domain. In: Electronic Proceedings of the ACM Conference of the Australian Computer-Human Interaction Special Interest Group (OZCHI’11), 4 pages, 2011","short":"C. Röcker, M. Ziefle, in: Electronic Proceedings of the ACM Conference of the Australian Computer-Human Interaction Special Interest Group (OZCHI’11), 4 Pages, 2011."},"publication_status":"published","main_file_link":[{"open_access":"1"}],"year":2011,"author":[{"last_name":"Röcker","id":"61525","full_name":"Röcker, Carsten","first_name":"Carsten"},{"first_name":"Martina","full_name":"Ziefle, Martina","last_name":"Ziefle"}],"department":[{"_id":"DEP5023"}],"abstract":[{"text":"Technology-enhanced homecare environments mark a big step towards increased quality of life for elderly and disabled people at home. While the potential benefits of smart healthcare solutions are undeniable, privacysensitive design concepts are necessary to guarantee their wide-spread adoption. This paper takes a closer look at privacy regulation mechanisms in everyday life and illustrates the importance of incorporating these intuitive human processes into the design of future homecare applications.","lang":"eng"}],"status":"public"},{"volume":6,"citation":{"van":"Röcker C, Maeder A. User-Centered Design of Smart Healthcare Applications. Electronic Journal of Health Informatics. 2011;6(2).","havard":"C. Röcker, A. Maeder, User-Centered Design of Smart Healthcare Applications, Electronic Journal of Health Informatics. 6 (2011).","bjps":"Röcker C and Maeder A (2011) User-Centered Design of Smart Healthcare Applications. Electronic Journal of Health Informatics 6.","mla":"Röcker, Carsten, and Anthony Maeder. “User-Centered Design of Smart Healthcare Applications.” Electronic Journal of Health Informatics, vol. 6, no. 2, e11, Central Queensland Univ., 2011.","ufg":"Röcker, Carsten/Maeder, Anthony (2011): User-Centered Design of Smart Healthcare Applications, in: Electronic Journal of Health Informatics 6 (2).","apa":"Röcker, C., & Maeder, A. (2011). User-Centered Design of Smart Healthcare Applications. Electronic Journal of Health Informatics, 6(2).","chicago":"Röcker, Carsten, and Anthony Maeder. “User-Centered Design of Smart Healthcare Applications.” Electronic Journal of Health Informatics 6, no. 2 (2011).","short":"C. Röcker, A. Maeder, Electronic Journal of Health Informatics 6 (2011).","chicago-de":"Röcker, Carsten und Anthony Maeder. 2011. User-Centered Design of Smart Healthcare Applications. Electronic Journal of Health Informatics 6, Nr. 2.","din1505-2-1":"Röcker, Carsten ; Maeder, Anthony: User-Centered Design of Smart Healthcare Applications. In: Electronic Journal of Health Informatics Bd. 6. Rockhampton, Central Queensland Univ. (2011), Nr. 2","ama":"Röcker C, Maeder A. User-Centered Design of Smart Healthcare Applications. Electronic Journal of Health Informatics. 2011;6(2).","ieee":"C. Röcker and A. Maeder, “User-Centered Design of Smart Healthcare Applications,” Electronic Journal of Health Informatics, vol. 6, no. 2, 2011."},"title":"User-Centered Design of Smart Healthcare Applications","extern":"1","status":"public","main_file_link":[{"open_access":"1"}],"year":2011,"author":[{"id":"61525","full_name":"Röcker, Carsten","last_name":"Röcker","first_name":"Carsten"},{"last_name":"Maeder","first_name":"Anthony","full_name":"Maeder, Anthony"}],"related_material":{"link":[{"relation":"original","url":"https://web.archive.org/web/20181101120110/http://www.ejhi.net/ojs/index.php/ejhi/issue/view/11"}]},"date_updated":"2023-03-15T13:49:53Z","publication_identifier":{"issn":["1446-4381"]},"publication":"Electronic Journal of Health Informatics","date_created":"2021-01-20T13:39:19Z","keyword":["Healthcare Applications"],"language":[{"iso":"eng"}],"oa":"1","publication_status":"published","publisher":"Central Queensland Univ.","department":[{"_id":"DEP5023"}],"issue":"2","user_id":"15514","intvolume":" 6","type":"journal_article","place":" Rockhampton","_id":"4484","article_number":" e11"},{"status":"public","page":"167-172","abstract":[{"text":"Research in the field of Ambient Assisted Living gained considerable momentum over the last decade and the diversity of existing applications is matched by a broad variety of implementation approaches. This paper takes a closer look at existing work in this field and provides a structured overview over state-of-the-art implementation concepts.","lang":"eng"}],"year":2011,"author":[{"last_name":"Röcker","id":"61525","full_name":"Röcker, Carsten","first_name":"Carsten"}],"conference":{"end_date":"2011-09-18","start_date":"2011-0916","name":"International Conference on Information and Digital Engineering (ICIDE'11)","location":"Singapore"},"department":[{"_id":"DEP5023"}],"citation":{"chicago":"Röcker, Carsten. “Designing Ambient Assisted Living Applications: An Overview of State-of-the-Art Implementation Concepts.” In Modeling, Simulation and Control, edited by X. Chunxiao, 167–72, 2011.","apa":"Röcker, C. (2011). Designing Ambient Assisted Living Applications: An Overview of State-of-the-Art Implementation Concepts. In X. Chunxiao (Ed.), Modeling, Simulation and Control (pp. 167–172). Singapore.","ieee":"C. Röcker, “Designing Ambient Assisted Living Applications: An Overview of State-of-the-Art Implementation Concepts,” in Modeling, Simulation and Control, Singapore, 2011, pp. 167–172.","ufg":"Röcker, Carsten (2011): Designing Ambient Assisted Living Applications: An Overview of State-of-the-Art Implementation Concepts, in: X. Chunxiao (Hg.): Modeling, Simulation and Control, S. 167–172.","havard":"C. Röcker, Designing Ambient Assisted Living Applications: An Overview of State-of-the-Art Implementation Concepts, in: X. Chunxiao (Ed.), Modeling, Simulation and Control, 2011: pp. 167–172.","bjps":"Röcker C (2011) Designing Ambient Assisted Living Applications: An Overview of State-of-the-Art Implementation Concepts. In Chunxiao X (ed.), Modeling, Simulation and Control. pp. 167–172.","mla":"Röcker, Carsten. “Designing Ambient Assisted Living Applications: An Overview of State-of-the-Art Implementation Concepts.” Modeling, Simulation and Control, edited by X. Chunxiao, 2011, pp. 167–72.","van":"Röcker C. Designing Ambient Assisted Living Applications: An Overview of State-of-the-Art Implementation Concepts. In: Chunxiao X, editor. Modeling, Simulation and Control. 2011. p. 167–72.","ama":"Röcker C. Designing Ambient Assisted Living Applications: An Overview of State-of-the-Art Implementation Concepts. In: Chunxiao X, ed. Modeling, Simulation and Control. ; 2011:167-172.","din1505-2-1":"Röcker, Carsten: Designing Ambient Assisted Living Applications: An Overview of State-of-the-Art Implementation Concepts. In: Chunxiao, X. (Hrsg.): Modeling, Simulation and Control, 2011, S. 167–172","chicago-de":"Röcker, Carsten. 2011. Designing Ambient Assisted Living Applications: An Overview of State-of-the-Art Implementation Concepts. In: Modeling, Simulation and Control, hg. von X. Chunxiao, 167–172.","short":"C. Röcker, in: X. Chunxiao (Ed.), Modeling, Simulation and Control, 2011, pp. 167–172."},"publication_status":"published","title":"Designing Ambient Assisted Living Applications: An Overview of State-of-the-Art Implementation Concepts","extern":"1","_id":"4485","keyword":["Smart medical services","ambient assisted living","E-healt","intelligent environments","ubiquitous and pervasive computing"],"language":[{"iso":"eng"}],"editor":[{"first_name":"X.","full_name":"Chunxiao, X.","last_name":"Chunxiao"}],"user_id":"15514","date_updated":"2023-03-15T13:49:53Z","related_material":{"link":[{"relation":"research_paper","url":"https://www.researchgate.net/profile/Carsten_Roecker/publication/265375671_Designing_Ambient_Assisted_Living_Applications_An_Overview_over_State-of-the-Art_Implementation_Concepts/links/5409d44d0cf2d8daaabf98cb/Designing-Ambient-Assisted-Living-Applications-An-Overview-over-State-of-the-Art-Implementation-Concepts.pdf"}]},"publication":"Modeling, Simulation and Control","date_created":"2021-01-20T13:39:20Z","type":"conference"},{"type":"conference","user_id":"15514","_id":"4486","doi":"10.4108/icst.pervasivehealth.2011.246044","place":"Piscataway, NJ","publication_status":"published","abstract":[{"text":"This paper reports on a study analyzing the attitudes of users towards different types of Ambient Assisted Living (AAL) services. The study explores the acceptance and terms of use of large interactive screens for the most common applications types: health, social and convenience services. In order to understand the impact of user diversity, we explored age, gender, health status, social contact, interest in technology, and the reported ease of use as well as their relation to acceptance. Using the questionnaire method, 30 women and 30 men between 17-95 years were examined. The results show that users are not yet very familiar with the vision of smart technology at home and report a considerable diffidence and aloofness towards using such technologies. Persons with many social contacts and a high interest in technology show the highest acceptance for electronic services at home. Astonishingly, the results for the different applications were insensitive to gender and age, which indicates that the precautious attitude towards AAL applications represents a universal phenomenon. Consequently, acceptance criteria as well as users' needs and wants should be seriously considered in order to successfully design smart home technologies.","lang":"eng"}],"conference":{"start_date":"2011-05-23","end_date":"2011-05-26","location":"Dublin, Ireland","name":"5th International ICST Conference on Pervasive Computing Technologies"},"department":[{"_id":"DEP5023"}],"publisher":"IEEE","publication_identifier":{"unknown":["978-1-936968-15-2"]},"publication":"Proceedings of the 5th International ICST Conference on Pervasive Computing Technologies","date_created":"2021-01-20T13:39:22Z","date_updated":"2023-03-15T13:49:53Z","oa":"1","keyword":["Pervasive and Ubiquitous Computing","Ambient Assisted Living","Smart Living","Technology Acceptance","Study"],"language":[{"iso":"eng"}],"title":"Perceived Usefulness of Assistive Technologies and Electronic Services for Ambient Assisted Living","extern":"1","citation":{"ieee":"M. Ziefle, C. Röcker, and A. Holzinger, “Perceived Usefulness of Assistive Technologies and Electronic Services for Ambient Assisted Living,” in Proceedings of the 5th International ICST Conference on Pervasive Computing Technologies, Dublin, Ireland, 2011.","ama":"Ziefle M, Röcker C, Holzinger A. Perceived Usefulness of Assistive Technologies and Electronic Services for Ambient Assisted Living. In: Proceedings of the 5th International ICST Conference on Pervasive Computing Technologies. Piscataway, NJ: IEEE; 2011. doi:10.4108/icst.pervasivehealth.2011.246044","chicago":"Ziefle, Martina, Carsten Röcker, and Andreas Holzinger. “Perceived Usefulness of Assistive Technologies and Electronic Services for Ambient Assisted Living.” In Proceedings of the 5th International ICST Conference on Pervasive Computing Technologies. Piscataway, NJ: IEEE, 2011. https://doi.org/10.4108/icst.pervasivehealth.2011.246044.","apa":"Ziefle, M., Röcker, C., & Holzinger, A. (2011). Perceived Usefulness of Assistive Technologies and Electronic Services for Ambient Assisted Living. In Proceedings of the 5th International ICST Conference on Pervasive Computing Technologies. Piscataway, NJ: IEEE. https://doi.org/10.4108/icst.pervasivehealth.2011.246044","ufg":"Ziefle, Martina et. al. (2011): Perceived Usefulness of Assistive Technologies and Electronic Services for Ambient Assisted Living, in: Proceedings of the 5th International ICST Conference on Pervasive Computing Technologies, Piscataway, NJ.","bjps":"Ziefle M, Röcker C and Holzinger A (2011) Perceived Usefulness of Assistive Technologies and Electronic Services for Ambient Assisted Living. Proceedings of the 5th International ICST Conference on Pervasive Computing Technologies. Piscataway, NJ: IEEE.","havard":"M. Ziefle, C. Röcker, A. Holzinger, Perceived Usefulness of Assistive Technologies and Electronic Services for Ambient Assisted Living, in: Proceedings of the 5th International ICST Conference on Pervasive Computing Technologies, IEEE, Piscataway, NJ, 2011.","mla":"Ziefle, Martina, et al. “Perceived Usefulness of Assistive Technologies and Electronic Services for Ambient Assisted Living.” Proceedings of the 5th International ICST Conference on Pervasive Computing Technologies, IEEE, 2011, doi:10.4108/icst.pervasivehealth.2011.246044.","van":"Ziefle M, Röcker C, Holzinger A. Perceived Usefulness of Assistive Technologies and Electronic Services for Ambient Assisted Living. In: Proceedings of the 5th International ICST Conference on Pervasive Computing Technologies. Piscataway, NJ: IEEE; 2011.","din1505-2-1":"Ziefle, Martina ; Röcker, Carsten ; Holzinger, Andreas: Perceived Usefulness of Assistive Technologies and Electronic Services for Ambient Assisted Living. In: Proceedings of the 5th International ICST Conference on Pervasive Computing Technologies. Piscataway, NJ : IEEE, 2011","chicago-de":"Ziefle, Martina, Carsten Röcker und Andreas Holzinger. 2011. Perceived Usefulness of Assistive Technologies and Electronic Services for Ambient Assisted Living. In: Proceedings of the 5th International ICST Conference on Pervasive Computing Technologies. Piscataway, NJ: IEEE. doi:10.4108/icst.pervasivehealth.2011.246044, .","short":"M. Ziefle, C. Röcker, A. Holzinger, in: Proceedings of the 5th International ICST Conference on Pervasive Computing Technologies, IEEE, Piscataway, NJ, 2011."},"year":2011,"author":[{"first_name":"Martina","full_name":"Ziefle, Martina","last_name":"Ziefle"},{"id":"61525","last_name":"Röcker","full_name":"Röcker, Carsten","first_name":"Carsten"},{"first_name":"Andreas","full_name":"Holzinger, Andreas","last_name":"Holzinger"}],"main_file_link":[{"open_access":"1"}],"status":"public"},{"user_id":"15514","date_updated":"2023-03-15T13:49:53Z","publication":"Proceedings of the ACM Augmented Human Conference (AH'11), March 12 - 14, Tokyo, Japan, CD-ROM","publication_identifier":{"isbn":["978-1-4503-0426-9"]},"type":"conference","date_created":"2021-01-20T13:39:23Z","place":"New York","language":[{"iso":"eng"}],"_id":"4487","doi":"10.1145/1959826.1959827","citation":{"ama":"Heidrich F, Ziefle M, Röcker C, Borchers J. Interacting with Smart Walls: A Multi-Dimensional Analysis of Input Technologies for Augmented Environments. In: Proceedings of the ACM Augmented Human Conference (AH’11), March 12 - 14, Tokyo, Japan, CD-ROM. New York: Association for Computing Machinery; 2011:1-8. doi:10.1145/1959826.1959827","ieee":"F. Heidrich, M. Ziefle, C. Röcker, and J. Borchers, “Interacting with Smart Walls: A Multi-Dimensional Analysis of Input Technologies for Augmented Environments,” in Proceedings of the ACM Augmented Human Conference (AH’11), March 12 - 14, Tokyo, Japan, CD-ROM, Tokyo, Japan, 2011, pp. 1–8.","short":"F. Heidrich, M. Ziefle, C. Röcker, J. Borchers, in: Proceedings of the ACM Augmented Human Conference (AH’11), March 12 - 14, Tokyo, Japan, CD-ROM, Association for Computing Machinery, New York, 2011, pp. 1–8.","din1505-2-1":"Heidrich, Felix ; Ziefle, Martina ; Röcker, Carsten ; Borchers, Jan: Interacting with Smart Walls: A Multi-Dimensional Analysis of Input Technologies for Augmented Environments. In: Proceedings of the ACM Augmented Human Conference (AH’11), March 12 - 14, Tokyo, Japan, CD-ROM. New York : Association for Computing Machinery, 2011, S. 1–8","chicago-de":"Heidrich, Felix, Martina Ziefle, Carsten Röcker und Jan Borchers. 2011. Interacting with Smart Walls: A Multi-Dimensional Analysis of Input Technologies for Augmented Environments. In: Proceedings of the ACM Augmented Human Conference (AH’11), March 12 - 14, Tokyo, Japan, CD-ROM, 1–8. New York: Association for Computing Machinery. doi:10.1145/1959826.1959827, .","van":"Heidrich F, Ziefle M, Röcker C, Borchers J. Interacting with Smart Walls: A Multi-Dimensional Analysis of Input Technologies for Augmented Environments. In: Proceedings of the ACM Augmented Human Conference (AH’11), March 12 - 14, Tokyo, Japan, CD-ROM. New York: Association for Computing Machinery; 2011. p. 1–8.","mla":"Heidrich, Felix, et al. “Interacting with Smart Walls: A Multi-Dimensional Analysis of Input Technologies for Augmented Environments.” Proceedings of the ACM Augmented Human Conference (AH’11), March 12 - 14, Tokyo, Japan, CD-ROM, Association for Computing Machinery, 2011, pp. 1–8, doi:10.1145/1959826.1959827.","bjps":"Heidrich F et al. (2011) Interacting with Smart Walls: A Multi-Dimensional Analysis of Input Technologies for Augmented Environments. Proceedings of the ACM Augmented Human Conference (AH’11), March 12 - 14, Tokyo, Japan, CD-ROM. New York: Association for Computing Machinery, pp. 1–8.","havard":"F. Heidrich, M. Ziefle, C. Röcker, J. Borchers, Interacting with Smart Walls: A Multi-Dimensional Analysis of Input Technologies for Augmented Environments, in: Proceedings of the ACM Augmented Human Conference (AH’11), March 12 - 14, Tokyo, Japan, CD-ROM, Association for Computing Machinery, New York, 2011: pp. 1–8.","ufg":"Heidrich, Felix et. al. (2011): Interacting with Smart Walls: A Multi-Dimensional Analysis of Input Technologies for Augmented Environments, in: Proceedings of the ACM Augmented Human Conference (AH’11), March 12 - 14, Tokyo, Japan, CD-ROM, New York, S. 1–8.","apa":"Heidrich, F., Ziefle, M., Röcker, C., & Borchers, J. (2011). Interacting with Smart Walls: A Multi-Dimensional Analysis of Input Technologies for Augmented Environments. In Proceedings of the ACM Augmented Human Conference (AH’11), March 12 - 14, Tokyo, Japan, CD-ROM (pp. 1–8). New York: Association for Computing Machinery. https://doi.org/10.1145/1959826.1959827","chicago":"Heidrich, Felix, Martina Ziefle, Carsten Röcker, and Jan Borchers. “Interacting with Smart Walls: A Multi-Dimensional Analysis of Input Technologies for Augmented Environments.” In Proceedings of the ACM Augmented Human Conference (AH’11), March 12 - 14, Tokyo, Japan, CD-ROM, 1–8. New York: Association for Computing Machinery, 2011. https://doi.org/10.1145/1959826.1959827."},"publication_status":"published","title":"Interacting with Smart Walls: A Multi-Dimensional Analysis of Input Technologies for Augmented Environments","extern":"1","status":"public","page":"1-8","publisher":"Association for Computing Machinery","year":2011,"author":[{"full_name":"Heidrich, Felix","last_name":"Heidrich","first_name":"Felix"},{"last_name":"Ziefle","full_name":"Ziefle, Martina","first_name":"Martina"},{"id":"61525","full_name":"Röcker, Carsten","first_name":"Carsten","last_name":"Röcker"},{"first_name":"Jan","full_name":"Borchers, Jan","last_name":"Borchers"}],"department":[{"_id":"DEP5023"}],"conference":{"location":"Tokyo, Japan","name":"2nd Augmented Human International Conference","start_date":"2011-03-13","end_date":"2011-03-13"},"abstract":[{"text":"This paper reports on a multi-dimensional evaluation of three typical interaction devices for wall-sized displays in augmented environments. Touch, trackpad and gesture input were evaluated regarding a variety of usability dimensions in order to understand the quality profile of each input device. Among the three interaction devices, the touch input showed the highest scores in performance and acceptance as well as hedonic value.","lang":"eng"}]},{"_id":"4672","place":"Zhuhai, China","language":[{"iso":"eng"}],"user_id":"74222","date_updated":"2023-03-15T13:49:54Z","publication":"3rd International Symposium on Computer, Communication, Control and Automation (3CA 2011)","date_created":"2021-01-28T11:53:11Z","type":"conference","publisher":"Springer Verlag","status":"public","year":2011,"author":[{"last_name":"Kumar","full_name":"Kumar, Barath","first_name":"Barath"},{"first_name":"Wilhelm","last_name":"Schäfer","full_name":"Schäfer, Wilhelm"},{"last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","first_name":"Jürgen","id":"1899"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"citation":{"chicago":"Kumar, Barath, Wilhelm Schäfer, and Jürgen Jasperneite. “An Approach to Model and Test Automation Systems.” In 3rd International Symposium on Computer, Communication, Control and Automation (3CA 2011). Zhuhai, China: Springer Verlag, 2011.","apa":"Kumar, B., Schäfer, W., & Jasperneite, J. (2011). An approach to Model and Test Automation Systems. In 3rd International Symposium on Computer, Communication, Control and Automation (3CA 2011). Zhuhai, China: Springer Verlag.","ufg":"Kumar, Barath et. al. (2011): An approach to Model and Test Automation Systems, in: 3rd International Symposium on Computer, Communication, Control and Automation (3CA 2011), Zhuhai, China.","bjps":"Kumar B, Schäfer W and Jasperneite J (2011) An Approach to Model and Test Automation Systems. 3rd International Symposium on Computer, Communication, Control and Automation (3CA 2011). Zhuhai, China: Springer Verlag.","havard":"B. Kumar, W. Schäfer, J. Jasperneite, An approach to Model and Test Automation Systems, in: 3rd International Symposium on Computer, Communication, Control and Automation (3CA 2011), Springer Verlag, Zhuhai, China, 2011.","mla":"Kumar, Barath, et al. “An Approach to Model and Test Automation Systems.” 3rd International Symposium on Computer, Communication, Control and Automation (3CA 2011), Springer Verlag, 2011.","van":"Kumar B, Schäfer W, Jasperneite J. An approach to Model and Test Automation Systems. In: 3rd International Symposium on Computer, Communication, Control and Automation (3CA 2011). Zhuhai, China: Springer Verlag; 2011.","chicago-de":"Kumar, Barath, Wilhelm Schäfer und Jürgen Jasperneite. 2011. An approach to Model and Test Automation Systems. In: 3rd International Symposium on Computer, Communication, Control and Automation (3CA 2011). Zhuhai, China: Springer Verlag.","din1505-2-1":"Kumar, Barath ; Schäfer, Wilhelm ; Jasperneite, Jürgen: An approach to Model and Test Automation Systems. In: 3rd International Symposium on Computer, Communication, Control and Automation (3CA 2011). Zhuhai, China : Springer Verlag, 2011","short":"B. Kumar, W. Schäfer, J. Jasperneite, in: 3rd International Symposium on Computer, Communication, Control and Automation (3CA 2011), Springer Verlag, Zhuhai, China, 2011.","ieee":"B. Kumar, W. Schäfer, and J. Jasperneite, “An approach to Model and Test Automation Systems,” in 3rd International Symposium on Computer, Communication, Control and Automation (3CA 2011), 2011.","ama":"Kumar B, Schäfer W, Jasperneite J. An approach to Model and Test Automation Systems. In: 3rd International Symposium on Computer, Communication, Control and Automation (3CA 2011). Zhuhai, China: Springer Verlag; 2011."},"title":"An approach to Model and Test Automation Systems"},{"year":2011,"author":[{"first_name":"Jürgen","id":"1899","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public","title":"IKT in der Automation am Beispiel der Lemgoer Modellfabrik","citation":{"ama":"Jasperneite J. IKT in der Automation am Beispiel der Lemgoer Modellfabrik. In: JST Community 2011 (Vortrag). Bremen; 2011.","ieee":"J. Jasperneite, “IKT in der Automation am Beispiel der Lemgoer Modellfabrik,” in JST Community 2011 (Vortrag), 2011.","din1505-2-1":"Jasperneite, Jürgen: IKT in der Automation am Beispiel der Lemgoer Modellfabrik. In: JST Community 2011 (Vortrag). Bremen, 2011","chicago-de":"Jasperneite, Jürgen. 2011. IKT in der Automation am Beispiel der Lemgoer Modellfabrik. In: JST Community 2011 (Vortrag). Bremen.","short":"J. Jasperneite, in: JST Community 2011 (Vortrag), Bremen, 2011.","ufg":"Jasperneite, Jürgen (2011): IKT in der Automation am Beispiel der Lemgoer Modellfabrik, in: JST Community 2011 (Vortrag), Bremen.","havard":"J. Jasperneite, IKT in der Automation am Beispiel der Lemgoer Modellfabrik, in: JST Community 2011 (Vortrag), Bremen, 2011.","bjps":"Jasperneite J (2011) IKT in Der Automation Am Beispiel Der Lemgoer Modellfabrik. JST Community 2011 (Vortrag). Bremen.","mla":"Jasperneite, Jürgen. “IKT in Der Automation Am Beispiel Der Lemgoer Modellfabrik.” JST Community 2011 (Vortrag), 2011.","van":"Jasperneite J. IKT in der Automation am Beispiel der Lemgoer Modellfabrik. In: JST Community 2011 (Vortrag). Bremen; 2011.","chicago":"Jasperneite, Jürgen. “IKT in Der Automation Am Beispiel Der Lemgoer Modellfabrik.” In JST Community 2011 (Vortrag). Bremen, 2011.","apa":"Jasperneite, J. (2011). IKT in der Automation am Beispiel der Lemgoer Modellfabrik. In JST Community 2011 (Vortrag). Bremen."},"place":"Bremen","language":[{"iso":"eng"}],"_id":"4680","publication":"JST Community 2011 (Vortrag)","date_created":"2021-01-28T11:54:19Z","type":"conference","user_id":"74222","date_updated":"2023-03-15T13:49:54Z"},{"publication":"JST Community 2011, Bremen, ","date_created":"2021-01-28T12:03:56Z","type":"conference","user_id":"74222","date_updated":"2023-03-15T13:49:54Z","language":[{"iso":"eng"}],"_id":"4681","title":"IKT in der Automation am Beispiel der Lemgoer Modellfabrik","citation":{"chicago-de":"Lücke, Benedikt und Jürgen Jasperneite. 2011. IKT in der Automation am Beispiel der Lemgoer Modellfabrik. In: JST Community 2011, Bremen, .","din1505-2-1":"Lücke, Benedikt ; Jasperneite, Jürgen: IKT in der Automation am Beispiel der Lemgoer Modellfabrik. In: JST Community 2011, Bremen, , 2011","short":"B. Lücke, J. Jasperneite, in: JST Community 2011, Bremen, , 2011.","chicago":"Lücke, Benedikt, and Jürgen Jasperneite. “IKT in Der Automation Am Beispiel Der Lemgoer Modellfabrik.” In JST Community 2011, Bremen, , 2011.","ieee":"B. Lücke and J. Jasperneite, “IKT in der Automation am Beispiel der Lemgoer Modellfabrik,” in JST Community 2011, Bremen, , 2011.","apa":"Lücke, B., & Jasperneite, J. (2011). IKT in der Automation am Beispiel der Lemgoer Modellfabrik. In JST Community 2011, Bremen, .","mla":"Lücke, Benedikt, and Jürgen Jasperneite. “IKT in Der Automation Am Beispiel Der Lemgoer Modellfabrik.” JST Community 2011, Bremen, , 2011.","bjps":"Lücke B and Jasperneite J (2011) IKT in Der Automation Am Beispiel Der Lemgoer Modellfabrik. JST Community 2011, Bremen, .","havard":"B. Lücke, J. Jasperneite, IKT in der Automation am Beispiel der Lemgoer Modellfabrik, in: JST Community 2011, Bremen, , 2011.","ufg":"Lücke, Benedikt/Jasperneite, Jürgen (2011): IKT in der Automation am Beispiel der Lemgoer Modellfabrik, in: JST Community 2011, Bremen, .","ama":"Lücke B, Jasperneite J. IKT in der Automation am Beispiel der Lemgoer Modellfabrik. In: JST Community 2011, Bremen, . ; 2011.","van":"Lücke B, Jasperneite J. IKT in der Automation am Beispiel der Lemgoer Modellfabrik. In: JST Community 2011, Bremen, . 2011."},"author":[{"last_name":"Lücke","full_name":"Lücke, Benedikt","first_name":"Benedikt","id":"11178"},{"first_name":"Jürgen","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","id":"1899"}],"year":2011,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public"},{"publication":"JST Community 2011, Bremen, ","type":"conference","date_created":"2021-01-28T12:20:08Z","user_id":"74222","date_updated":"2023-03-15T13:49:54Z","_id":"4682","language":[{"iso":"eng"}],"title":"IKT in der Automation am Beispiel der Lemgoer Modellfabrik","citation":{"din1505-2-1":"Lücke, Benedikt ; Jasperneite, Jürgen: IKT in der Automation am Beispiel der Lemgoer Modellfabrik. In: JST Community 2011, Bremen, , 2011","chicago-de":"Lücke, Benedikt und Jürgen Jasperneite. 2011. IKT in der Automation am Beispiel der Lemgoer Modellfabrik. In: JST Community 2011, Bremen, .","short":"B. Lücke, J. Jasperneite, in: JST Community 2011, Bremen, , 2011.","mla":"Lücke, Benedikt, and Jürgen Jasperneite. “IKT in Der Automation Am Beispiel Der Lemgoer Modellfabrik.” JST Community 2011, Bremen, , 2011.","bjps":"Lücke B and Jasperneite J (2011) IKT in Der Automation Am Beispiel Der Lemgoer Modellfabrik. JST Community 2011, Bremen, .","havard":"B. Lücke, J. Jasperneite, IKT in der Automation am Beispiel der Lemgoer Modellfabrik, in: JST Community 2011, Bremen, , 2011.","ufg":"Lücke, Benedikt/Jasperneite, Jürgen (2011): IKT in der Automation am Beispiel der Lemgoer Modellfabrik, in: JST Community 2011, Bremen, .","van":"Lücke B, Jasperneite J. IKT in der Automation am Beispiel der Lemgoer Modellfabrik. In: JST Community 2011, Bremen, . 2011.","chicago":"Lücke, Benedikt, and Jürgen Jasperneite. “IKT in Der Automation Am Beispiel Der Lemgoer Modellfabrik.” In JST Community 2011, Bremen, , 2011.","apa":"Lücke, B., & Jasperneite, J. (2011). IKT in der Automation am Beispiel der Lemgoer Modellfabrik. In JST Community 2011, Bremen, .","ama":"Lücke B, Jasperneite J. IKT in der Automation am Beispiel der Lemgoer Modellfabrik. In: JST Community 2011, Bremen, . ; 2011.","ieee":"B. Lücke and J. Jasperneite, “IKT in der Automation am Beispiel der Lemgoer Modellfabrik,” in JST Community 2011, Bremen, , 2011."},"author":[{"full_name":"Lücke, Benedikt","id":"11178","first_name":"Benedikt","last_name":"Lücke"},{"id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"}],"year":2011,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public"},{"title":"mINA - Eine echtzeitfähige Middleware für die Industrieautomation zur Realisierung semantikbasierter Wandelbarkeit ","citation":{"ama":"Faltinski S, Wienke M, Niggemann O, Jasperneite J. mINA - Eine echtzeitfähige Middleware für die Industrieautomation zur Realisierung semantikbasierter Wandelbarkeit . In: 2. Jahreskolloquium Kommunikation in Der Automation (KommA 2011). Magdeburg; 2011.","ieee":"S. Faltinski, M. Wienke, O. Niggemann, and J. Jasperneite, “mINA - Eine echtzeitfähige Middleware für die Industrieautomation zur Realisierung semantikbasierter Wandelbarkeit ,” in 2. Jahreskolloquium Kommunikation in der Automation (KommA 2011), 2011.","van":"Faltinski S, Wienke M, Niggemann O, Jasperneite J. mINA - Eine echtzeitfähige Middleware für die Industrieautomation zur Realisierung semantikbasierter Wandelbarkeit . In: 2 Jahreskolloquium Kommunikation in der Automation (KommA 2011). Magdeburg; 2011.","ufg":"Faltinski, Sebastian et. al. (2011): mINA - Eine echtzeitfähige Middleware für die Industrieautomation zur Realisierung semantikbasierter Wandelbarkeit , in: 2. Jahreskolloquium Kommunikation in der Automation (KommA 2011), Magdeburg.","bjps":"Faltinski S et al. (2011) MINA - Eine Echtzeitfähige Middleware Für Die Industrieautomation Zur Realisierung Semantikbasierter Wandelbarkeit . 2. Jahreskolloquium Kommunikation in Der Automation (KommA 2011). Magdeburg.","mla":"Faltinski, Sebastian, et al. “MINA - Eine Echtzeitfähige Middleware Für Die Industrieautomation Zur Realisierung Semantikbasierter Wandelbarkeit .” 2. Jahreskolloquium Kommunikation in Der Automation (KommA 2011), 2011.","havard":"S. Faltinski, M. Wienke, O. Niggemann, J. Jasperneite, mINA - Eine echtzeitfähige Middleware für die Industrieautomation zur Realisierung semantikbasierter Wandelbarkeit , in: 2. Jahreskolloquium Kommunikation in Der Automation (KommA 2011), Magdeburg, 2011.","apa":"Faltinski, S., Wienke, M., Niggemann, O., & Jasperneite, J. (2011). mINA - Eine echtzeitfähige Middleware für die Industrieautomation zur Realisierung semantikbasierter Wandelbarkeit . In 2. Jahreskolloquium Kommunikation in der Automation (KommA 2011). Magdeburg.","chicago":"Faltinski, Sebastian, Michael Wienke, Oliver Niggemann, and Jürgen Jasperneite. “MINA - Eine Echtzeitfähige Middleware Für Die Industrieautomation Zur Realisierung Semantikbasierter Wandelbarkeit .” In 2. Jahreskolloquium Kommunikation in Der Automation (KommA 2011). Magdeburg, 2011.","short":"S. Faltinski, M. Wienke, O. Niggemann, J. Jasperneite, in: 2. Jahreskolloquium Kommunikation in Der Automation (KommA 2011), Magdeburg, 2011.","chicago-de":"Faltinski, Sebastian, Michael Wienke, Oliver Niggemann und Jürgen Jasperneite. 2011. mINA - Eine echtzeitfähige Middleware für die Industrieautomation zur Realisierung semantikbasierter Wandelbarkeit . In: 2. Jahreskolloquium Kommunikation in der Automation (KommA 2011). Magdeburg.","din1505-2-1":"Faltinski, Sebastian ; Wienke, Michael ; Niggemann, Oliver ; Jasperneite, Jürgen: mINA - Eine echtzeitfähige Middleware für die Industrieautomation zur Realisierung semantikbasierter Wandelbarkeit . In: 2. Jahreskolloquium Kommunikation in der Automation (KommA 2011). Magdeburg, 2011"},"year":2011,"author":[{"last_name":"Faltinski","full_name":"Faltinski, Sebastian","first_name":"Sebastian"},{"last_name":"Wienke","full_name":"Wienke, Michael","first_name":"Michael"},{"id":"10876","last_name":"Niggemann","full_name":"Niggemann, Oliver","first_name":"Oliver"},{"full_name":"Jasperneite, Jürgen","first_name":"Jürgen","last_name":"Jasperneite","id":"1899"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public","publication":"2. Jahreskolloquium Kommunikation in der Automation (KommA 2011)","date_created":"2021-01-28T12:21:03Z","type":"conference","user_id":"74222","date_updated":"2023-03-15T13:49:54Z","place":"Magdeburg","language":[{"iso":"eng"}],"_id":"4683"},{"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2011,"author":[{"full_name":"Schäfermann, Mark","first_name":"Mark","last_name":"Schäfermann"},{"full_name":"Jasperneite, Jürgen","id":"1899","first_name":"Jürgen","last_name":"Jasperneite"}],"status":"public","title":"Reproduzierbare Labortestumgebung für entwicklungsbegleitende Tests von M2M Komponenten","citation":{"chicago-de":"Schäfermann, Mark und Jürgen Jasperneite. 2011. Reproduzierbare Labortestumgebung für entwicklungsbegleitende Tests von M2M Komponenten. In: .","din1505-2-1":"Schäfermann, Mark ; Jasperneite, Jürgen: Reproduzierbare Labortestumgebung für entwicklungsbegleitende Tests von M2M Komponenten. In: , 2011","short":"M. Schäfermann, J. Jasperneite, in: 2011.","ufg":"Schäfermann, Mark/Jasperneite, Jürgen (2011): Reproduzierbare Labortestumgebung für entwicklungsbegleitende Tests von M2M Komponenten, in: .","havard":"M. Schäfermann, J. Jasperneite, Reproduzierbare Labortestumgebung für entwicklungsbegleitende Tests von M2M Komponenten, in: 2011.","mla":"Schäfermann, Mark, and Jürgen Jasperneite. Reproduzierbare Labortestumgebung Für Entwicklungsbegleitende Tests von M2M Komponenten. 2011.","bjps":"Schäfermann M and Jasperneite J (2011) Reproduzierbare Labortestumgebung Für Entwicklungsbegleitende Tests von M2M Komponenten.","van":"Schäfermann M, Jasperneite J. Reproduzierbare Labortestumgebung für entwicklungsbegleitende Tests von M2M Komponenten. In 2011.","chicago":"Schäfermann, Mark, and Jürgen Jasperneite. “Reproduzierbare Labortestumgebung Für Entwicklungsbegleitende Tests von M2M Komponenten,” 2011.","apa":"Schäfermann, M., & Jasperneite, J. (2011). Reproduzierbare Labortestumgebung für entwicklungsbegleitende Tests von M2M Komponenten.","ama":"Schäfermann M, Jasperneite J. Reproduzierbare Labortestumgebung für entwicklungsbegleitende Tests von M2M Komponenten. In: ; 2011.","ieee":"M. Schäfermann and J. Jasperneite, “Reproduzierbare Labortestumgebung für entwicklungsbegleitende Tests von M2M Komponenten,” 2011."},"_id":"4684","language":[{"iso":"eng"}],"date_created":"2021-01-28T12:22:01Z","type":"conference","date_updated":"2023-03-15T13:49:54Z","user_id":"74222"},{"status":"public","year":2011,"author":[{"last_name":"Trsek","first_name":"Henning","full_name":"Trsek, Henning","id":"1486"},{"first_name":"Jürgen","last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"citation":{"ama":"Trsek H, Jasperneite J. An isochronous medium access control for real-time wireless communications in industrial automation systems - A use case for wireless clock synchronization. In: 2011 International IEEE Symposium on Precision Clock Synchronization for Measurement, Control and Communication (ISPCS 2011). Munich, Germany; 2011.","ieee":"H. Trsek and J. Jasperneite, “An isochronous medium access control for real-time wireless communications in industrial automation systems - A use case for wireless clock synchronization,” in 2011 International IEEE Symposium on Precision Clock Synchronization for Measurement, Control and Communication (ISPCS 2011), 2011.","van":"Trsek H, Jasperneite J. An isochronous medium access control for real-time wireless communications in industrial automation systems - A use case for wireless clock synchronization. In: 2011 International IEEE Symposium on Precision Clock Synchronization for Measurement, Control and Communication (ISPCS 2011). Munich, Germany; 2011.","ufg":"Trsek, Henning/Jasperneite, Jürgen (2011): An isochronous medium access control for real-time wireless communications in industrial automation systems - A use case for wireless clock synchronization, in: 2011 International IEEE Symposium on Precision Clock Synchronization for Measurement, Control and Communication (ISPCS 2011), Munich, Germany.","mla":"Trsek, Henning, and Jürgen Jasperneite. “An Isochronous Medium Access Control for Real-Time Wireless Communications in Industrial Automation Systems - A Use Case for Wireless Clock Synchronization.” 2011 International IEEE Symposium on Precision Clock Synchronization for Measurement, Control and Communication (ISPCS 2011), 2011.","bjps":"Trsek H and Jasperneite J (2011) An Isochronous Medium Access Control for Real-Time Wireless Communications in Industrial Automation Systems - A Use Case for Wireless Clock Synchronization. 2011 International IEEE Symposium on Precision Clock Synchronization for Measurement, Control and Communication (ISPCS 2011). Munich, Germany.","havard":"H. Trsek, J. Jasperneite, An isochronous medium access control for real-time wireless communications in industrial automation systems - A use case for wireless clock synchronization, in: 2011 International IEEE Symposium on Precision Clock Synchronization for Measurement, Control and Communication (ISPCS 2011), Munich, Germany, 2011.","apa":"Trsek, H., & Jasperneite, J. (2011). An isochronous medium access control for real-time wireless communications in industrial automation systems - A use case for wireless clock synchronization. In 2011 International IEEE Symposium on Precision Clock Synchronization for Measurement, Control and Communication (ISPCS 2011). Munich, Germany.","chicago":"Trsek, Henning, and Jürgen Jasperneite. “An Isochronous Medium Access Control for Real-Time Wireless Communications in Industrial Automation Systems - A Use Case for Wireless Clock Synchronization.” In 2011 International IEEE Symposium on Precision Clock Synchronization for Measurement, Control and Communication (ISPCS 2011). Munich, Germany, 2011.","short":"H. Trsek, J. Jasperneite, in: 2011 International IEEE Symposium on Precision Clock Synchronization for Measurement, Control and Communication (ISPCS 2011), Munich, Germany, 2011.","din1505-2-1":"Trsek, Henning ; Jasperneite, Jürgen: An isochronous medium access control for real-time wireless communications in industrial automation systems - A use case for wireless clock synchronization. In: 2011 International IEEE Symposium on Precision Clock Synchronization for Measurement, Control and Communication (ISPCS 2011). Munich, Germany, 2011","chicago-de":"Trsek, Henning und Jürgen Jasperneite. 2011. An isochronous medium access control for real-time wireless communications in industrial automation systems - A use case for wireless clock synchronization. In: 2011 International IEEE Symposium on Precision Clock Synchronization for Measurement, Control and Communication (ISPCS 2011). Munich, Germany."},"title":"An isochronous medium access control for real-time wireless communications in industrial automation systems - A use case for wireless clock synchronization","_id":"4685","place":"Munich, Germany","language":[{"iso":"eng"}],"user_id":"74222","date_updated":"2023-03-15T13:49:54Z","publication":"2011 International IEEE Symposium on Precision Clock Synchronization for Measurement, Control and Communication (ISPCS 2011)","date_created":"2021-01-28T12:23:11Z","type":"conference"},{"status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"first_name":"Jürgen","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","id":"1899"}],"year":2011,"citation":{"din1505-2-1":"Jasperneite, Jürgen: Informationstechnik für Intelligente Mobilität. In: 6. Lippe Energie Forum. Lemgo (Vortrag), 2011","chicago-de":"Jasperneite, Jürgen. 2011. Informationstechnik für Intelligente Mobilität. In: 6. Lippe Energie Forum. Lemgo (Vortrag).","short":"J. Jasperneite, in: 6. Lippe Energie Forum, Lemgo (Vortrag), 2011.","mla":"Jasperneite, Jürgen. “Informationstechnik Für Intelligente Mobilität.” 6. Lippe Energie Forum, 2011.","havard":"J. Jasperneite, Informationstechnik für Intelligente Mobilität, in: 6. Lippe Energie Forum, Lemgo (Vortrag), 2011.","bjps":"Jasperneite J (2011) Informationstechnik Für Intelligente Mobilität. 6. Lippe Energie Forum. Lemgo (Vortrag).","ufg":"Jasperneite, Jürgen (2011): Informationstechnik für Intelligente Mobilität, in: 6. Lippe Energie Forum, Lemgo (Vortrag).","ama":"Jasperneite J. Informationstechnik für Intelligente Mobilität. In: 6. Lippe Energie Forum. Lemgo (Vortrag); 2011.","van":"Jasperneite J. Informationstechnik für Intelligente Mobilität. In: 6 Lippe Energie Forum. Lemgo (Vortrag); 2011.","chicago":"Jasperneite, Jürgen. “Informationstechnik Für Intelligente Mobilität.” In 6. Lippe Energie Forum. Lemgo (Vortrag), 2011.","ieee":"J. Jasperneite, “Informationstechnik für Intelligente Mobilität,” in 6. Lippe Energie Forum, 2011.","apa":"Jasperneite, J. (2011). Informationstechnik für Intelligente Mobilität. In 6. Lippe Energie Forum. Lemgo (Vortrag)."},"title":"Informationstechnik für Intelligente Mobilität","_id":"4686","language":[{"iso":"eng"}],"place":"Lemgo (Vortrag)","date_updated":"2023-03-15T13:49:54Z","user_id":"74222","type":"conference","date_created":"2021-01-28T12:24:20Z","publication":"6. Lippe Energie Forum"},{"status":"public","author":[{"first_name":"Jahanzaib","last_name":"Imtiaz","full_name":"Imtiaz, Jahanzaib"},{"last_name":"Jasperneite","first_name":"Jürgen","id":"1899","full_name":"Jasperneite, Jürgen"},{"first_name":"Sebastian","last_name":"Schriegel","full_name":"Schriegel, Sebastian"}],"year":2011,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"citation":{"chicago":"Imtiaz, Jahanzaib, Jürgen Jasperneite, and Sebastian Schriegel. “A Proposal to Integrate Process Data Communication to IEEE 802.1 Audio Video Bridging (AVB).” In 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France, 2011.","apa":"Imtiaz, J., Jasperneite, J., & Schriegel, S. (2011). A Proposal to Integrate Process Data Communication to IEEE 802.1 Audio Video Bridging (AVB). In 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France.","ufg":"Imtiaz, Jahanzaib et. al. (2011): A Proposal to Integrate Process Data Communication to IEEE 802.1 Audio Video Bridging (AVB), in: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), Toulouse, France.","bjps":"Imtiaz J, Jasperneite J and Schriegel S (2011) A Proposal to Integrate Process Data Communication to IEEE 802.1 Audio Video Bridging (AVB). 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France.","mla":"Imtiaz, Jahanzaib, et al. “A Proposal to Integrate Process Data Communication to IEEE 802.1 Audio Video Bridging (AVB).” 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), 2011.","havard":"J. Imtiaz, J. Jasperneite, S. Schriegel, A Proposal to Integrate Process Data Communication to IEEE 802.1 Audio Video Bridging (AVB), in: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), Toulouse, France, 2011.","van":"Imtiaz J, Jasperneite J, Schriegel S. A Proposal to Integrate Process Data Communication to IEEE 802.1 Audio Video Bridging (AVB). In: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France; 2011.","chicago-de":"Imtiaz, Jahanzaib, Jürgen Jasperneite und Sebastian Schriegel. 2011. A Proposal to Integrate Process Data Communication to IEEE 802.1 Audio Video Bridging (AVB). In: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France.","din1505-2-1":"Imtiaz, Jahanzaib ; Jasperneite, Jürgen ; Schriegel, Sebastian: A Proposal to Integrate Process Data Communication to IEEE 802.1 Audio Video Bridging (AVB). In: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France, 2011","short":"J. Imtiaz, J. Jasperneite, S. Schriegel, in: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), Toulouse, France, 2011.","ieee":"J. Imtiaz, J. Jasperneite, and S. Schriegel, “A Proposal to Integrate Process Data Communication to IEEE 802.1 Audio Video Bridging (AVB),” in 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), 2011.","ama":"Imtiaz J, Jasperneite J, Schriegel S. A Proposal to Integrate Process Data Communication to IEEE 802.1 Audio Video Bridging (AVB). In: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France; 2011."},"title":"A Proposal to Integrate Process Data Communication to IEEE 802.1 Audio Video Bridging (AVB)","place":"Toulouse, France","language":[{"iso":"eng"}],"_id":"4687","user_id":"74222","date_updated":"2023-03-15T13:49:55Z","publication":"16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011)","type":"conference","date_created":"2021-01-28T12:25:32Z"},{"place":"Toulouse, France","language":[{"iso":"eng"}],"_id":"4688","user_id":"74222","date_updated":"2023-03-15T13:49:55Z","publication":"16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011)","type":"conference","date_created":"2021-01-28T12:26:31Z","status":"public","author":[{"first_name":"Michael","full_name":"Wienke, Michael","last_name":"Wienke"},{"last_name":"Faltinski","full_name":"Faltinski, Sebastian","first_name":"Sebastian"},{"id":"10876","first_name":"Oliver","last_name":"Niggemann","full_name":"Niggemann, Oliver"},{"full_name":"Jasperneite, Jürgen","first_name":"Jürgen","last_name":"Jasperneite","id":"1899"}],"year":2011,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"citation":{"ama":"Wienke M, Faltinski S, Niggemann O, Jasperneite J. mINA-DL: A Novel Description Language Enabling Dynamic Reconfiguration in Industrial Automation. In: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France; 2011.","ieee":"M. Wienke, S. Faltinski, O. Niggemann, and J. Jasperneite, “mINA-DL: A Novel Description Language Enabling Dynamic Reconfiguration in Industrial Automation,” in 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), 2011.","chicago-de":"Wienke, Michael, Sebastian Faltinski, Oliver Niggemann und Jürgen Jasperneite. 2011. mINA-DL: A Novel Description Language Enabling Dynamic Reconfiguration in Industrial Automation. In: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France.","din1505-2-1":"Wienke, Michael ; Faltinski, Sebastian ; Niggemann, Oliver ; Jasperneite, Jürgen: mINA-DL: A Novel Description Language Enabling Dynamic Reconfiguration in Industrial Automation. In: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France, 2011","short":"M. Wienke, S. Faltinski, O. Niggemann, J. Jasperneite, in: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), Toulouse, France, 2011.","ufg":"Wienke, Michael et. al. (2011): mINA-DL: A Novel Description Language Enabling Dynamic Reconfiguration in Industrial Automation, in: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), Toulouse, France.","havard":"M. Wienke, S. Faltinski, O. Niggemann, J. Jasperneite, mINA-DL: A Novel Description Language Enabling Dynamic Reconfiguration in Industrial Automation, in: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), Toulouse, France, 2011.","bjps":"Wienke M et al. (2011) MINA-DL: A Novel Description Language Enabling Dynamic Reconfiguration in Industrial Automation. 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France.","mla":"Wienke, Michael, et al. “MINA-DL: A Novel Description Language Enabling Dynamic Reconfiguration in Industrial Automation.” 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), 2011.","van":"Wienke M, Faltinski S, Niggemann O, Jasperneite J. mINA-DL: A Novel Description Language Enabling Dynamic Reconfiguration in Industrial Automation. In: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France; 2011.","chicago":"Wienke, Michael, Sebastian Faltinski, Oliver Niggemann, and Jürgen Jasperneite. “MINA-DL: A Novel Description Language Enabling Dynamic Reconfiguration in Industrial Automation.” In 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France, 2011.","apa":"Wienke, M., Faltinski, S., Niggemann, O., & Jasperneite, J. (2011). mINA-DL: A Novel Description Language Enabling Dynamic Reconfiguration in Industrial Automation. In 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France."},"title":"mINA-DL: A Novel Description Language Enabling Dynamic Reconfiguration in Industrial Automation"},{"year":2011,"author":[{"full_name":"Kumar, Barath","first_name":"Barath","last_name":"Kumar"},{"full_name":"Czybik, Björn","last_name":"Czybik","id":"76180","first_name":"Björn"},{"full_name":"Jasperneite, Jürgen","first_name":"Jürgen","last_name":"Jasperneite","id":"1899"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public","title":"Model Based TTCN-3 Testing of Industrial Automation Systems - First results","citation":{"din1505-2-1":"Kumar, Barath ; Czybik, Björn ; Jasperneite, Jürgen: Model Based TTCN-3 Testing of Industrial Automation Systems - First results. In: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France, 2011","chicago-de":"Kumar, Barath, Björn Czybik und Jürgen Jasperneite. 2011. Model Based TTCN-3 Testing of Industrial Automation Systems - First results. In: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France.","short":"B. Kumar, B. Czybik, J. Jasperneite, in: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), Toulouse, France, 2011.","chicago":"Kumar, Barath, Björn Czybik, and Jürgen Jasperneite. “Model Based TTCN-3 Testing of Industrial Automation Systems - First Results.” In 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France, 2011.","apa":"Kumar, B., Czybik, B., & Jasperneite, J. (2011). Model Based TTCN-3 Testing of Industrial Automation Systems - First results. In 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France.","ufg":"Kumar, Barath et. al. (2011): Model Based TTCN-3 Testing of Industrial Automation Systems - First results, in: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), Toulouse, France.","havard":"B. Kumar, B. Czybik, J. Jasperneite, Model Based TTCN-3 Testing of Industrial Automation Systems - First results, in: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), Toulouse, France, 2011.","bjps":"Kumar B, Czybik B and Jasperneite J (2011) Model Based TTCN-3 Testing of Industrial Automation Systems - First Results. 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France.","mla":"Kumar, Barath, et al. “Model Based TTCN-3 Testing of Industrial Automation Systems - First Results.” 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), 2011.","van":"Kumar B, Czybik B, Jasperneite J. Model Based TTCN-3 Testing of Industrial Automation Systems - First results. In: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France; 2011.","ieee":"B. Kumar, B. Czybik, and J. Jasperneite, “Model Based TTCN-3 Testing of Industrial Automation Systems - First results,” in 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), 2011.","ama":"Kumar B, Czybik B, Jasperneite J. Model Based TTCN-3 Testing of Industrial Automation Systems - First results. In: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France; 2011."},"_id":"4689","place":"Toulouse, France","language":[{"iso":"eng"}],"publication":"16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011)","date_created":"2021-01-28T12:29:22Z","type":"conference","user_id":"74222","date_updated":"2023-03-15T13:49:55Z"},{"_id":"4690","language":[{"iso":"eng"}],"place":"Toulouse, France","type":"conference","date_created":"2021-01-28T12:30:37Z","publication":"16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011)","date_updated":"2023-03-15T13:49:55Z","user_id":"74222","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2011,"author":[{"first_name":"Henning","last_name":"Trsek","id":"1486","full_name":"Trsek, Henning"},{"full_name":"Schwalowsky, Stefan","first_name":"Stefan","last_name":"Schwalowsky"},{"id":"76180","full_name":"Czybik, Björn","first_name":"Björn","last_name":"Czybik"},{"last_name":"Jasperneite","first_name":"Jürgen","id":"1899","full_name":"Jasperneite, Jürgen"}],"status":"public","title":"Implementation of an advanced IEEE 802.11 WLAN AP for real-time wireless communications","citation":{"chicago":"Trsek, Henning, Stefan Schwalowsky, Björn Czybik, and Jürgen Jasperneite. “Implementation of an Advanced IEEE 802.11 WLAN AP for Real-Time Wireless Communications.” In 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France, 2011.","apa":"Trsek, H., Schwalowsky, S., Czybik, B., & Jasperneite, J. (2011). Implementation of an advanced IEEE 802.11 WLAN AP for real-time wireless communications. In 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France.","ieee":"H. Trsek, S. Schwalowsky, B. Czybik, and J. Jasperneite, “Implementation of an advanced IEEE 802.11 WLAN AP for real-time wireless communications,” in 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), 2011.","ufg":"Trsek, Henning et. al. (2011): Implementation of an advanced IEEE 802.11 WLAN AP for real-time wireless communications, in: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), Toulouse, France.","havard":"H. Trsek, S. Schwalowsky, B. Czybik, J. Jasperneite, Implementation of an advanced IEEE 802.11 WLAN AP for real-time wireless communications, in: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), Toulouse, France, 2011.","bjps":"Trsek H et al. (2011) Implementation of an Advanced IEEE 802.11 WLAN AP for Real-Time Wireless Communications. 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France.","mla":"Trsek, Henning, et al. “Implementation of an Advanced IEEE 802.11 WLAN AP for Real-Time Wireless Communications.” 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), 2011.","van":"Trsek H, Schwalowsky S, Czybik B, Jasperneite J. Implementation of an advanced IEEE 802.11 WLAN AP for real-time wireless communications. In: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France; 2011.","ama":"Trsek H, Schwalowsky S, Czybik B, Jasperneite J. Implementation of an advanced IEEE 802.11 WLAN AP for real-time wireless communications. In: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France; 2011.","chicago-de":"Trsek, Henning, Stefan Schwalowsky, Björn Czybik und Jürgen Jasperneite. 2011. Implementation of an advanced IEEE 802.11 WLAN AP for real-time wireless communications. In: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France.","din1505-2-1":"Trsek, Henning ; Schwalowsky, Stefan ; Czybik, Björn ; Jasperneite, Jürgen: Implementation of an advanced IEEE 802.11 WLAN AP for real-time wireless communications. In: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France, 2011","short":"H. Trsek, S. Schwalowsky, B. Czybik, J. Jasperneite, in: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), Toulouse, France, 2011."}},{"_id":"4691","language":[{"iso":"eng"}],"date_created":"2021-01-28T12:31:20Z","type":"journal_article","publication":"Maschinenbau und Metallbearbeitung Deutschland","date_updated":"2023-03-15T13:49:55Z","user_id":"74222","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2011,"author":[{"id":"1899","first_name":"Jürgen","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite"}],"status":"public","title":"Safety und Security für technische Systeme","citation":{"ieee":"J. Jasperneite, “Safety und Security für technische Systeme,” Maschinenbau und Metallbearbeitung Deutschland, vol. Kuhn Fachverlag GmbH Co. KG, ISSN 1614-242X, 2011.","ama":"Jasperneite J. Safety und Security für technische Systeme. Maschinenbau und Metallbearbeitung Deutschland. 2011;Kuhn Fachverlag GmbH Co. KG, ISSN 1614-242X.","short":"J. Jasperneite, Maschinenbau Und Metallbearbeitung Deutschland Kuhn Fachverlag GmbH Co. KG, ISSN 1614-242X (2011).","chicago-de":"Jasperneite, Jürgen. 2011. Safety und Security für technische Systeme. Maschinenbau und Metallbearbeitung Deutschland Kuhn Fachverlag GmbH Co. KG, ISSN 1614-242X.","din1505-2-1":"Jasperneite, Jürgen: Safety und Security für technische Systeme. In: Maschinenbau und Metallbearbeitung Deutschland Bd. Kuhn Fachverlag GmbH Co. KG, ISSN 1614-242X (2011)","apa":"Jasperneite, J. (2011). Safety und Security für technische Systeme. Maschinenbau Und Metallbearbeitung Deutschland, Kuhn Fachverlag GmbH Co. KG, ISSN 1614-242X.","chicago":"Jasperneite, Jürgen. “Safety Und Security Für Technische Systeme.” Maschinenbau Und Metallbearbeitung Deutschland Kuhn Fachverlag GmbH Co. KG, ISSN 1614-242X (2011).","van":"Jasperneite J. Safety und Security für technische Systeme. Maschinenbau und Metallbearbeitung Deutschland. 2011;Kuhn Fachverlag GmbH Co. KG, ISSN 1614-242X.","havard":"J. Jasperneite, Safety und Security für technische Systeme, Maschinenbau Und Metallbearbeitung Deutschland. Kuhn Fachverlag GmbH Co. KG, ISSN 1614-242X (2011).","mla":"Jasperneite, Jürgen. “Safety Und Security Für Technische Systeme.” Maschinenbau Und Metallbearbeitung Deutschland, vol. Kuhn Fachverlag GmbH Co. KG, ISSN 1614-242X, 2011.","bjps":"Jasperneite J (2011) Safety Und Security Für Technische Systeme. Maschinenbau und Metallbearbeitung Deutschland Kuhn Fachverlag GmbH Co. KG, ISSN 1614-242X.","ufg":"Jasperneite, Jürgen (2011): Safety und Security für technische Systeme, in: Maschinenbau und Metallbearbeitung Deutschland Kuhn Fachverlag GmbH Co. KG, ISSN 1614-242X."},"volume":"Kuhn Fachverlag GmbH Co. KG, ISSN 1614-242X"},{"_id":"4692","language":[{"iso":"eng"}],"publication":"at - Automatisierungstechnik","type":"conference","date_created":"2021-01-28T12:32:20Z","user_id":"74222","date_updated":"2023-03-15T13:49:55Z","year":2011,"author":[{"last_name":"John","first_name":"Dirk","full_name":"John, Dirk"},{"full_name":"Jasperneite, Jürgen","first_name":"Jürgen","id":"1899","last_name":"Jasperneite"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"publisher":"Oldenbourg Verlag","status":"public","title":"Interoperabilität auf Feldebene","citation":{"ieee":"D. John and J. Jasperneite, “Interoperabilität auf Feldebene,” in at - Automatisierungstechnik, 2011.","ama":"John D, Jasperneite J. Interoperabilität auf Feldebene. In: At - Automatisierungstechnik. Oldenbourg Verlag; 2011.","din1505-2-1":"John, Dirk ; Jasperneite, Jürgen: Interoperabilität auf Feldebene. In: at - Automatisierungstechnik : Oldenbourg Verlag, 2011","chicago-de":"John, Dirk und Jürgen Jasperneite. 2011. Interoperabilität auf Feldebene. In: at - Automatisierungstechnik. Oldenbourg Verlag.","short":"D. John, J. Jasperneite, in: At - Automatisierungstechnik, Oldenbourg Verlag, 2011.","chicago":"John, Dirk, and Jürgen Jasperneite. “Interoperabilität Auf Feldebene.” In At - Automatisierungstechnik. Oldenbourg Verlag, 2011.","apa":"John, D., & Jasperneite, J. (2011). Interoperabilität auf Feldebene. In at - Automatisierungstechnik. Oldenbourg Verlag.","ufg":"John, Dirk/Jasperneite, Jürgen (2011): Interoperabilität auf Feldebene, in: at - Automatisierungstechnik.","bjps":"John D and Jasperneite J (2011) Interoperabilität Auf Feldebene. At - Automatisierungstechnik. Oldenbourg Verlag.","havard":"D. John, J. Jasperneite, Interoperabilität auf Feldebene, in: At - Automatisierungstechnik, Oldenbourg Verlag, 2011.","mla":"John, Dirk, and Jürgen Jasperneite. “Interoperabilität Auf Feldebene.” At - Automatisierungstechnik, Oldenbourg Verlag, 2011.","van":"John D, Jasperneite J. Interoperabilität auf Feldebene. In: at - Automatisierungstechnik. Oldenbourg Verlag; 2011."}},{"_id":"4693","place":"Lemgo, Germany","language":[{"iso":"eng"}],"user_id":"15514","date_updated":"2023-03-15T13:49:55Z","related_material":{"link":[{"url":"https://www.th-owl.de/init/forschung/projekte/b/filteroff/68/single.html","relation":"confirmation"}]},"type":"report","date_created":"2021-01-28T12:33:32Z","publisher":"inIT","status":"public","year":2011,"author":[{"last_name":"Czybik","first_name":"Björn","id":"76180","full_name":"Czybik, Björn"},{"full_name":"Kumar, Barath","first_name":"Barath","last_name":"Kumar"},{"last_name":"Jasperneite","id":"1899","first_name":"Jürgen","full_name":"Jasperneite, Jürgen"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"citation":{"chicago":"Czybik, Björn, Barath Kumar, and Jürgen Jasperneite. Protocol Engineering with UML 2.0 - From Research to Design: The Lemgoer Model Factory Protocol. Lemgo, Germany: inIT, 2011.","apa":"Czybik, B., Kumar, B., & Jasperneite, J. (2011). Protocol Engineering with UML 2.0 - From Research to Design: The Lemgoer Model Factory Protocol. Lemgo, Germany: inIT.","ieee":"B. Czybik, B. Kumar, and J. Jasperneite, Protocol Engineering with UML 2.0 - From Research to Design: The Lemgoer Model Factory Protocol. Lemgo, Germany: inIT, 2011.","ufg":"Czybik, Björn et. al. (2011): Protocol Engineering with UML 2.0 - From Research to Design: The Lemgoer Model Factory Protocol, Lemgo, Germany.","havard":"B. Czybik, B. Kumar, J. Jasperneite, Protocol Engineering with UML 2.0 - From Research to Design: The Lemgoer Model Factory Protocol, inIT, Lemgo, Germany, 2011.","bjps":"Czybik B, Kumar B and Jasperneite J (2011) Protocol Engineering with UML 2.0 - From Research to Design: The Lemgoer Model Factory Protocol. Lemgo, Germany: inIT.","mla":"Czybik, Björn, et al. Protocol Engineering with UML 2.0 - From Research to Design: The Lemgoer Model Factory Protocol. inIT, 2011.","van":"Czybik B, Kumar B, Jasperneite J. Protocol Engineering with UML 2.0 - From Research to Design: The Lemgoer Model Factory Protocol. Lemgo, Germany: inIT; 2011.","ama":"Czybik B, Kumar B, Jasperneite J. Protocol Engineering with UML 2.0 - From Research to Design: The Lemgoer Model Factory Protocol. Lemgo, Germany: inIT; 2011.","chicago-de":"Czybik, Björn, Barath Kumar und Jürgen Jasperneite. 2011. Protocol Engineering with UML 2.0 - From Research to Design: The Lemgoer Model Factory Protocol. Lemgo, Germany: inIT.","din1505-2-1":"Czybik, Björn ; Kumar, Barath ; Jasperneite, Jürgen: Protocol Engineering with UML 2.0 - From Research to Design: The Lemgoer Model Factory Protocol. Lemgo, Germany : inIT, 2011","short":"B. Czybik, B. Kumar, J. Jasperneite, Protocol Engineering with UML 2.0 - From Research to Design: The Lemgoer Model Factory Protocol, inIT, Lemgo, Germany, 2011."},"title":"Protocol Engineering with UML 2.0 - From Research to Design: The Lemgoer Model Factory Protocol"},{"citation":{"ama":"Jasperneite J. IT-basierte Automation (Vortrag). In: 6. Innovationsforum “Automation Als Innovationsmotor Des Deutschen Maschinenbaus.” Lemgo: OWL-Maschinenbau; 2011.","ieee":"J. Jasperneite, “IT-basierte Automation (Vortrag),” in 6. Innovationsforum “Automation als Innovationsmotor des deutschen Maschinenbaus,” 2011.","van":"Jasperneite J. IT-basierte Automation (Vortrag). In: 6 Innovationsforum “Automation als Innovationsmotor des deutschen Maschinenbaus.” Lemgo: OWL-Maschinenbau; 2011.","mla":"Jasperneite, Jürgen. “IT-Basierte Automation (Vortrag).” 6. Innovationsforum “Automation Als Innovationsmotor Des Deutschen Maschinenbaus,” OWL-Maschinenbau, 2011.","bjps":"Jasperneite J (2011) IT-Basierte Automation (Vortrag). 6. Innovationsforum ‘Automation Als Innovationsmotor Des Deutschen Maschinenbaus’. Lemgo: OWL-Maschinenbau.","havard":"J. Jasperneite, IT-basierte Automation (Vortrag), in: 6. Innovationsforum “Automation Als Innovationsmotor Des Deutschen Maschinenbaus,” OWL-Maschinenbau, Lemgo, 2011.","ufg":"Jasperneite, Jürgen (2011): IT-basierte Automation (Vortrag), in: 6. Innovationsforum „Automation als Innovationsmotor des deutschen Maschinenbaus“, Lemgo.","apa":"Jasperneite, J. (2011). IT-basierte Automation (Vortrag). In 6. Innovationsforum “Automation als Innovationsmotor des deutschen Maschinenbaus.” Lemgo: OWL-Maschinenbau.","chicago":"Jasperneite, Jürgen. “IT-Basierte Automation (Vortrag).” In 6. Innovationsforum “Automation Als Innovationsmotor Des Deutschen Maschinenbaus.” Lemgo: OWL-Maschinenbau, 2011.","short":"J. Jasperneite, in: 6. Innovationsforum “Automation Als Innovationsmotor Des Deutschen Maschinenbaus,” OWL-Maschinenbau, Lemgo, 2011.","din1505-2-1":"Jasperneite, Jürgen: IT-basierte Automation (Vortrag). In: 6. Innovationsforum „Automation als Innovationsmotor des deutschen Maschinenbaus“. Lemgo : OWL-Maschinenbau, 2011","chicago-de":"Jasperneite, Jürgen. 2011. IT-basierte Automation (Vortrag). In: 6. Innovationsforum „Automation als Innovationsmotor des deutschen Maschinenbaus“. Lemgo: OWL-Maschinenbau."},"title":"IT-basierte Automation (Vortrag)","status":"public","publisher":"OWL-Maschinenbau","author":[{"first_name":"Jürgen","last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen"}],"year":2011,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"user_id":"74222","date_updated":"2023-03-15T13:49:55Z","publication":"6. Innovationsforum \"Automation als Innovationsmotor des deutschen Maschinenbaus\"","date_created":"2021-01-28T12:34:21Z","type":"conference","place":"Lemgo","language":[{"iso":"eng"}],"_id":"4694"},{"status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2011,"author":[{"first_name":"Jürgen","full_name":"Jasperneite, Jürgen","id":"1899","last_name":"Jasperneite"},{"first_name":"Mark","full_name":"Schäfermann, Mark","last_name":"Schäfermann"}],"citation":{"short":"J. Jasperneite, M. Schäfermann, in: VDI-Tagung Wireless Automation 2011, 28. Und 29. Juni 2011 in Baden-Baden, 2011.","chicago-de":"Jasperneite, Jürgen und Mark Schäfermann. 2011. Einschätzung der Leistungsfähigkeit von Mobilfunksystemen zur Realisierung von M2M-Anwendungen. In: VDI-Tagung Wireless Automation 2011, 28. und 29. Juni 2011 in Baden-Baden.","din1505-2-1":"Jasperneite, Jürgen ; Schäfermann, Mark: Einschätzung der Leistungsfähigkeit von Mobilfunksystemen zur Realisierung von M2M-Anwendungen. In: VDI-Tagung Wireless Automation 2011, 28. und 29. Juni 2011 in Baden-Baden, 2011","apa":"Jasperneite, J., & Schäfermann, M. (2011). Einschätzung der Leistungsfähigkeit von Mobilfunksystemen zur Realisierung von M2M-Anwendungen. In VDI-Tagung Wireless Automation 2011, 28. und 29. Juni 2011 in Baden-Baden.","ieee":"J. Jasperneite and M. Schäfermann, “Einschätzung der Leistungsfähigkeit von Mobilfunksystemen zur Realisierung von M2M-Anwendungen,” in VDI-Tagung Wireless Automation 2011, 28. und 29. Juni 2011 in Baden-Baden, 2011.","chicago":"Jasperneite, Jürgen, and Mark Schäfermann. “Einschätzung Der Leistungsfähigkeit von Mobilfunksystemen Zur Realisierung von M2M-Anwendungen.” In VDI-Tagung Wireless Automation 2011, 28. Und 29. Juni 2011 in Baden-Baden, 2011.","van":"Jasperneite J, Schäfermann M. Einschätzung der Leistungsfähigkeit von Mobilfunksystemen zur Realisierung von M2M-Anwendungen. In: VDI-Tagung Wireless Automation 2011, 28 und 29 Juni 2011 in Baden-Baden. 2011.","ama":"Jasperneite J, Schäfermann M. Einschätzung der Leistungsfähigkeit von Mobilfunksystemen zur Realisierung von M2M-Anwendungen. In: VDI-Tagung Wireless Automation 2011, 28. Und 29. Juni 2011 in Baden-Baden. ; 2011.","ufg":"Jasperneite, Jürgen/Schäfermann, Mark (2011): Einschätzung der Leistungsfähigkeit von Mobilfunksystemen zur Realisierung von M2M-Anwendungen, in: VDI-Tagung Wireless Automation 2011, 28. und 29. Juni 2011 in Baden-Baden.","havard":"J. Jasperneite, M. Schäfermann, Einschätzung der Leistungsfähigkeit von Mobilfunksystemen zur Realisierung von M2M-Anwendungen, in: VDI-Tagung Wireless Automation 2011, 28. Und 29. Juni 2011 in Baden-Baden, 2011.","bjps":"Jasperneite J and Schäfermann M (2011) Einschätzung Der Leistungsfähigkeit von Mobilfunksystemen Zur Realisierung von M2M-Anwendungen. VDI-Tagung Wireless Automation 2011, 28. Und 29. Juni 2011 in Baden-Baden.","mla":"Jasperneite, Jürgen, and Mark Schäfermann. “Einschätzung Der Leistungsfähigkeit von Mobilfunksystemen Zur Realisierung von M2M-Anwendungen.” VDI-Tagung Wireless Automation 2011, 28. Und 29. Juni 2011 in Baden-Baden, 2011."},"title":"Einschätzung der Leistungsfähigkeit von Mobilfunksystemen zur Realisierung von M2M-Anwendungen","language":[{"iso":"eng"}],"_id":"4695","date_updated":"2023-03-15T13:49:55Z","user_id":"74222","type":"conference","date_created":"2021-01-28T12:36:00Z","publication":"VDI-Tagung Wireless Automation 2011, 28. und 29. Juni 2011 in Baden-Baden"},{"citation":{"van":"Schriegel S, Trsek H, Jasperneite J. Komplementärer Einsatz von IEC 61850 und IEC 61158 für den optimalen Betrieb von Windenergieanlagen in intelligenten Energienetzen. In: VDI Kongress AUTOMATION 2011 Baden-Baden. 2011.","ufg":"Schriegel, Sebastian et. al. (2011): Komplementärer Einsatz von IEC 61850 und IEC 61158 für den optimalen Betrieb von Windenergieanlagen in intelligenten Energienetzen., in: VDI Kongress AUTOMATION 2011 Baden-Baden.","mla":"Schriegel, Sebastian, et al. “Komplementärer Einsatz von IEC 61850 Und IEC 61158 Für Den Optimalen Betrieb von Windenergieanlagen in Intelligenten Energienetzen.” VDI Kongress AUTOMATION 2011 Baden-Baden, 2011.","bjps":"Schriegel S, Trsek H and Jasperneite J (2011) Komplementärer Einsatz von IEC 61850 Und IEC 61158 Für Den Optimalen Betrieb von Windenergieanlagen in Intelligenten Energienetzen. VDI Kongress AUTOMATION 2011 Baden-Baden.","havard":"S. Schriegel, H. Trsek, J. Jasperneite, Komplementärer Einsatz von IEC 61850 und IEC 61158 für den optimalen Betrieb von Windenergieanlagen in intelligenten Energienetzen., in: VDI Kongress AUTOMATION 2011 Baden-Baden, 2011.","apa":"Schriegel, S., Trsek, H., & Jasperneite, J. (2011). Komplementärer Einsatz von IEC 61850 und IEC 61158 für den optimalen Betrieb von Windenergieanlagen in intelligenten Energienetzen. In VDI Kongress AUTOMATION 2011 Baden-Baden.","chicago":"Schriegel, Sebastian, Henning Trsek, and Jürgen Jasperneite. “Komplementärer Einsatz von IEC 61850 Und IEC 61158 Für Den Optimalen Betrieb von Windenergieanlagen in Intelligenten Energienetzen.” In VDI Kongress AUTOMATION 2011 Baden-Baden, 2011.","short":"S. Schriegel, H. Trsek, J. Jasperneite, in: VDI Kongress AUTOMATION 2011 Baden-Baden, 2011.","chicago-de":"Schriegel, Sebastian, Henning Trsek und Jürgen Jasperneite. 2011. Komplementärer Einsatz von IEC 61850 und IEC 61158 für den optimalen Betrieb von Windenergieanlagen in intelligenten Energienetzen. In: VDI Kongress AUTOMATION 2011 Baden-Baden.","din1505-2-1":"Schriegel, Sebastian ; Trsek, Henning ; Jasperneite, Jürgen: Komplementärer Einsatz von IEC 61850 und IEC 61158 für den optimalen Betrieb von Windenergieanlagen in intelligenten Energienetzen. In: VDI Kongress AUTOMATION 2011 Baden-Baden, 2011","ama":"Schriegel S, Trsek H, Jasperneite J. Komplementärer Einsatz von IEC 61850 und IEC 61158 für den optimalen Betrieb von Windenergieanlagen in intelligenten Energienetzen. In: VDI Kongress AUTOMATION 2011 Baden-Baden. ; 2011.","ieee":"S. Schriegel, H. Trsek, and J. Jasperneite, “Komplementärer Einsatz von IEC 61850 und IEC 61158 für den optimalen Betrieb von Windenergieanlagen in intelligenten Energienetzen.,” in VDI Kongress AUTOMATION 2011 Baden-Baden, 2011."},"title":"Komplementärer Einsatz von IEC 61850 und IEC 61158 für den optimalen Betrieb von Windenergieanlagen in intelligenten Energienetzen.","status":"public","year":2011,"author":[{"first_name":"Sebastian","full_name":"Schriegel, Sebastian","last_name":"Schriegel"},{"last_name":"Trsek","id":"1486","full_name":"Trsek, Henning","first_name":"Henning"},{"first_name":"Jürgen","id":"1899","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"user_id":"74222","date_updated":"2023-03-15T13:49:55Z","publication":"VDI Kongress AUTOMATION 2011 Baden-Baden","date_created":"2021-01-28T12:38:05Z","type":"conference","language":[{"iso":"eng"}],"_id":"4696"},{"author":[{"full_name":"Schriegel, Sebastian","last_name":"Schriegel","first_name":"Sebastian"},{"last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"}],"year":2011,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public","title":"Taktsynchrone Applikationen mit PROFINET IO und Ethernet AVB.","citation":{"ama":"Schriegel S, Jasperneite J. Taktsynchrone Applikationen mit PROFINET IO und Ethernet AVB. In: VDI Kongress AUTOMATION 2011 Baden-Baden. ; 2011.","ieee":"S. Schriegel and J. Jasperneite, “Taktsynchrone Applikationen mit PROFINET IO und Ethernet AVB.,” in VDI Kongress AUTOMATION 2011 Baden-Baden, 2011.","ufg":"Schriegel, Sebastian/Jasperneite, Jürgen (2011): Taktsynchrone Applikationen mit PROFINET IO und Ethernet AVB., in: VDI Kongress AUTOMATION 2011 Baden-Baden.","havard":"S. Schriegel, J. Jasperneite, Taktsynchrone Applikationen mit PROFINET IO und Ethernet AVB., in: VDI Kongress AUTOMATION 2011 Baden-Baden, 2011.","mla":"Schriegel, Sebastian, and Jürgen Jasperneite. “Taktsynchrone Applikationen Mit PROFINET IO Und Ethernet AVB.” VDI Kongress AUTOMATION 2011 Baden-Baden, 2011.","bjps":"Schriegel S and Jasperneite J (2011) Taktsynchrone Applikationen Mit PROFINET IO Und Ethernet AVB. VDI Kongress AUTOMATION 2011 Baden-Baden.","van":"Schriegel S, Jasperneite J. Taktsynchrone Applikationen mit PROFINET IO und Ethernet AVB. In: VDI Kongress AUTOMATION 2011 Baden-Baden. 2011.","chicago":"Schriegel, Sebastian, and Jürgen Jasperneite. “Taktsynchrone Applikationen Mit PROFINET IO Und Ethernet AVB.” In VDI Kongress AUTOMATION 2011 Baden-Baden, 2011.","apa":"Schriegel, S., & Jasperneite, J. (2011). Taktsynchrone Applikationen mit PROFINET IO und Ethernet AVB. In VDI Kongress AUTOMATION 2011 Baden-Baden.","chicago-de":"Schriegel, Sebastian und Jürgen Jasperneite. 2011. Taktsynchrone Applikationen mit PROFINET IO und Ethernet AVB. In: VDI Kongress AUTOMATION 2011 Baden-Baden.","din1505-2-1":"Schriegel, Sebastian ; Jasperneite, Jürgen: Taktsynchrone Applikationen mit PROFINET IO und Ethernet AVB. In: VDI Kongress AUTOMATION 2011 Baden-Baden, 2011","short":"S. Schriegel, J. Jasperneite, in: VDI Kongress AUTOMATION 2011 Baden-Baden, 2011."},"language":[{"iso":"eng"}],"_id":"4697","publication":"VDI Kongress AUTOMATION 2011 Baden-Baden","type":"conference","date_created":"2021-01-28T12:39:04Z","user_id":"74222","date_updated":"2023-03-15T13:49:55Z"},{"status":"public","author":[{"last_name":"Sauer","first_name":"Olaf","full_name":"Sauer, Olaf"},{"id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"}],"year":2011,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"citation":{"short":"O. Sauer, J. Jasperneite, in: CIRP Conference on Manufacturing Systems , Madison in Wisconsin, USA , 2011.","din1505-2-1":"Sauer, Olaf ; Jasperneite, Jürgen: Adaptive information technology in manufacturing. In: CIRP Conference on Manufacturing Systems . Madison in Wisconsin, USA , 2011","chicago-de":"Sauer, Olaf und Jürgen Jasperneite. 2011. Adaptive information technology in manufacturing. In: CIRP Conference on Manufacturing Systems . Madison in Wisconsin, USA .","apa":"Sauer, O., & Jasperneite, J. (2011). Adaptive information technology in manufacturing. In CIRP Conference on Manufacturing Systems . Madison in Wisconsin, USA .","ieee":"O. Sauer and J. Jasperneite, “Adaptive information technology in manufacturing,” in CIRP Conference on Manufacturing Systems , 2011.","chicago":"Sauer, Olaf, and Jürgen Jasperneite. “Adaptive Information Technology in Manufacturing.” In CIRP Conference on Manufacturing Systems . Madison in Wisconsin, USA , 2011.","van":"Sauer O, Jasperneite J. Adaptive information technology in manufacturing. In: CIRP Conference on Manufacturing Systems . Madison in Wisconsin, USA ; 2011.","ama":"Sauer O, Jasperneite J. Adaptive information technology in manufacturing. In: CIRP Conference on Manufacturing Systems . Madison in Wisconsin, USA ; 2011.","ufg":"Sauer, Olaf/Jasperneite, Jürgen (2011): Adaptive information technology in manufacturing, in: CIRP Conference on Manufacturing Systems , Madison in Wisconsin, USA .","havard":"O. Sauer, J. Jasperneite, Adaptive information technology in manufacturing, in: CIRP Conference on Manufacturing Systems , Madison in Wisconsin, USA , 2011.","mla":"Sauer, Olaf, and Jürgen Jasperneite. “Adaptive Information Technology in Manufacturing.” CIRP Conference on Manufacturing Systems , 2011.","bjps":"Sauer O and Jasperneite J (2011) Adaptive Information Technology in Manufacturing. CIRP Conference on Manufacturing Systems . Madison in Wisconsin, USA ."},"title":"Adaptive information technology in manufacturing","_id":"4698","place":"Madison in Wisconsin, USA ","language":[{"iso":"eng"}],"user_id":"74222","date_updated":"2023-03-15T13:49:55Z","publication":"CIRP Conference on Manufacturing Systems ","date_created":"2021-01-28T12:40:00Z","type":"conference"},{"status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"first_name":"Jan","last_name":"Deppe","full_name":"Deppe, Jan"},{"id":"1486","first_name":"Henning","full_name":"Trsek, Henning","last_name":"Trsek"},{"last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"}],"year":2011,"citation":{"chicago-de":"Deppe, Jan, Henning Trsek und Jürgen Jasperneite. 2011. WLAN Geräte für die Industrie im Vergleich - Teil II. Elektronik 10.","din1505-2-1":"Deppe, Jan ; Trsek, Henning ; Jasperneite, Jürgen: WLAN Geräte für die Industrie im Vergleich - Teil II. In: Elektronik Bd. 10 (2011)","short":"J. Deppe, H. Trsek, J. Jasperneite, Elektronik 10 (2011).","ufg":"Deppe, Jan et. al. (2011): WLAN Geräte für die Industrie im Vergleich - Teil II, in: Elektronik 10.","mla":"Deppe, Jan, et al. “WLAN Geräte Für Die Industrie Im Vergleich - Teil II.” Elektronik, vol. 10, 2011.","havard":"J. Deppe, H. Trsek, J. Jasperneite, WLAN Geräte für die Industrie im Vergleich - Teil II, Elektronik. 10 (2011).","bjps":"Deppe J, Trsek H and Jasperneite J (2011) WLAN Geräte Für Die Industrie Im Vergleich - Teil II. Elektronik 10.","van":"Deppe J, Trsek H, Jasperneite J. WLAN Geräte für die Industrie im Vergleich - Teil II. Elektronik. 2011;10.","ama":"Deppe J, Trsek H, Jasperneite J. WLAN Geräte für die Industrie im Vergleich - Teil II. Elektronik. 2011;10.","chicago":"Deppe, Jan, Henning Trsek, and Jürgen Jasperneite. “WLAN Geräte Für Die Industrie Im Vergleich - Teil II.” Elektronik 10 (2011).","apa":"Deppe, J., Trsek, H., & Jasperneite, J. (2011). WLAN Geräte für die Industrie im Vergleich - Teil II. Elektronik, 10.","ieee":"J. Deppe, H. Trsek, and J. Jasperneite, “WLAN Geräte für die Industrie im Vergleich - Teil II,” Elektronik, vol. 10, 2011."},"volume":10,"title":"WLAN Geräte für die Industrie im Vergleich - Teil II","language":[{"iso":"eng"}],"_id":"4699","date_updated":"2023-03-15T13:49:55Z","user_id":"74222","intvolume":" 10","type":"journal_article","date_created":"2021-01-28T12:40:47Z","publication":"Elektronik"},{"status":"public","publisher":"inIT","year":2011,"author":[{"first_name":"Henning","id":"1486","full_name":"Trsek, Henning","last_name":"Trsek"},{"id":"1899","first_name":"Jürgen","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite"},{"last_name":"Heiss","first_name":"Stefan","full_name":"Heiss, Stefan","id":"1031"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"volume":6,"citation":{"van":"Trsek H, Jasperneite J, Heiss S. RAvE - Real-time automation networks in moving industrial environments. Lemgoer Schriftenreihe zur industriellen Informationstechnik = Lemgo series on industrial information technology . 2011;6.","ama":"Trsek H, Jasperneite J, Heiss S. RAvE - Real-time automation networks in moving industrial environments. Lemgoer Schriftenreihe zur industriellen Informationstechnik = Lemgo series on industrial information technology . 2011;6.","ufg":"Trsek, Henning et. al. (2011): RAvE - Real-time automation networks in moving industrial environments, in: Lemgoer Schriftenreihe zur industriellen Informationstechnik = Lemgo series on industrial information technology 6.","havard":"H. Trsek, J. Jasperneite, S. Heiss, RAvE - Real-time automation networks in moving industrial environments, Lemgoer Schriftenreihe Zur Industriellen Informationstechnik = Lemgo Series on Industrial Information Technology . 6 (2011).","mla":"Trsek, Henning, et al. “RAvE - Real-Time Automation Networks in Moving Industrial Environments.” Lemgoer Schriftenreihe Zur Industriellen Informationstechnik = Lemgo Series on Industrial Information Technology , vol. 6, inIT, 2011.","bjps":"Trsek H, Jasperneite J and Heiss S (2011) RAvE - Real-Time Automation Networks in Moving Industrial Environments. Lemgoer Schriftenreihe zur industriellen Informationstechnik = Lemgo series on industrial information technology 6.","apa":"Trsek, H., Jasperneite, J., & Heiss, S. (2011). RAvE - Real-time automation networks in moving industrial environments. Lemgoer Schriftenreihe Zur Industriellen Informationstechnik = Lemgo Series on Industrial Information Technology , 6.","ieee":"H. Trsek, J. Jasperneite, and S. Heiss, “RAvE - Real-time automation networks in moving industrial environments,” Lemgoer Schriftenreihe zur industriellen Informationstechnik = Lemgo series on industrial information technology , vol. 6, 2011.","chicago":"Trsek, Henning, Jürgen Jasperneite, and Stefan Heiss. “RAvE - Real-Time Automation Networks in Moving Industrial Environments.” Lemgoer Schriftenreihe Zur Industriellen Informationstechnik = Lemgo Series on Industrial Information Technology 6 (2011).","short":"H. Trsek, J. Jasperneite, S. Heiss, Lemgoer Schriftenreihe Zur Industriellen Informationstechnik = Lemgo Series on Industrial Information Technology 6 (2011).","din1505-2-1":"Trsek, Henning ; Jasperneite, Jürgen ; Heiss, Stefan: RAvE - Real-time automation networks in moving industrial environments. In: Lemgoer Schriftenreihe zur industriellen Informationstechnik = Lemgo series on industrial information technology Bd. 6. Lemgo, inIT (2011)","chicago-de":"Trsek, Henning, Jürgen Jasperneite und Stefan Heiss. 2011. RAvE - Real-time automation networks in moving industrial environments. Lemgoer Schriftenreihe zur industriellen Informationstechnik = Lemgo series on industrial information technology 6."},"publication_status":"published","title":"RAvE - Real-time automation networks in moving industrial environments","place":"Lemgo","language":[{"iso":"eng"}],"_id":"4700","user_id":"15514","date_updated":"2023-03-15T13:49:55Z","intvolume":" 6","publication":"Lemgoer Schriftenreihe zur industriellen Informationstechnik = Lemgo series on industrial information technology ","publication_identifier":{"issn":["1869-2087"]},"date_created":"2021-01-28T12:46:20Z","type":"journal_article"},{"place":"Boca Raton, FL","language":[{"iso":"eng"}],"_id":"4701","publication":" Industrial Electronics Handbook","date_created":"2021-01-28T12:48:07Z","type":"book_chapter","user_id":"74222","date_updated":"2023-03-15T13:49:55Z","year":2011,"author":[{"last_name":"Trsek","id":"1486","first_name":"Henning","full_name":"Trsek, Henning"},{"first_name":"Jürgen","last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen"},{"full_name":"Lo Bello, Lucia","first_name":"Lucia","last_name":"Lo Bello"},{"full_name":"Manic, Milos","first_name":"Milos","last_name":"Manic"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public","page":"48-1 - 48-13","publisher":"CRC Press","title":"Wireless Local Area Networks","citation":{"chicago":"Trsek, Henning, Jürgen Jasperneite, Lucia Lo Bello, and Milos Manic. “Wireless Local Area Networks.” In Industrial Electronics Handbook, 48-1-48–13. Boca Raton, FL: CRC Press, 2011.","apa":"Trsek, H., Jasperneite, J., Lo Bello, L., & Manic, M. (2011). Wireless Local Area Networks. In Industrial Electronics Handbook (pp. 48-1-48–13). Boca Raton, FL: CRC Press.","ufg":"Trsek, Henning et. al. (2011): Wireless Local Area Networks, in: Industrial Electronics Handbook, Boca Raton, FL, S. 48-1-48–13.","bjps":"Trsek H et al. (2011) Wireless Local Area Networks. Industrial Electronics Handbook. Boca Raton, FL: CRC Press, pp. 48-1-48–13.","havard":"H. Trsek, J. Jasperneite, L. Lo Bello, M. Manic, Wireless Local Area Networks, in: Industrial Electronics Handbook, CRC Press, Boca Raton, FL, 2011: pp. 48-1-48–13.","mla":"Trsek, Henning, et al. “Wireless Local Area Networks.” Industrial Electronics Handbook, CRC Press, 2011, pp. 48-1-48–13.","van":"Trsek H, Jasperneite J, Lo Bello L, Manic M. Wireless Local Area Networks. In: Industrial Electronics Handbook. Boca Raton, FL: CRC Press; 2011. p. 48-1-48–13.","chicago-de":"Trsek, Henning, Jürgen Jasperneite, Lucia Lo Bello und Milos Manic. 2011. Wireless Local Area Networks. In: Industrial Electronics Handbook, 48-1-48–13. Boca Raton, FL: CRC Press.","din1505-2-1":"Trsek, Henning ; Jasperneite, Jürgen ; Lo Bello, Lucia ; Manic, Milos: Wireless Local Area Networks. In: Industrial Electronics Handbook. Boca Raton, FL : CRC Press, 2011, S. 48-1-48–13","short":"H. Trsek, J. Jasperneite, L. Lo Bello, M. Manic, in: Industrial Electronics Handbook, CRC Press, Boca Raton, FL, 2011, pp. 48-1-48–13.","ieee":"H. Trsek, J. Jasperneite, L. Lo Bello, and M. Manic, “Wireless Local Area Networks,” in Industrial Electronics Handbook, Boca Raton, FL: CRC Press, 2011, pp. 48-1-48–13.","ama":"Trsek H, Jasperneite J, Lo Bello L, Manic M. Wireless Local Area Networks. In: Industrial Electronics Handbook. Boca Raton, FL: CRC Press; 2011:48-1-48-13."}},{"author":[{"first_name":"Jürgen","full_name":"Jasperneite, Jürgen","id":"1899","last_name":"Jasperneite"},{"last_name":"Mirabella","first_name":"Orazio","full_name":"Mirabella, Orazio"}],"year":2011,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public","page":"33-1 - 33-9","publisher":"CRC Press","title":"INTERBUS","citation":{"apa":"Jasperneite, J., & Mirabella, O. (2011). INTERBUS. In Industrial Electronics Handbooks (pp. 33-1-33–39). Boca Raton, FL: CRC Press.","ieee":"J. Jasperneite and O. Mirabella, “INTERBUS,” in Industrial Electronics Handbooks, Boca Raton, FL: CRC Press, 2011, pp. 33-1-33–9.","chicago":"Jasperneite, Jürgen, and Orazio Mirabella. “INTERBUS.” In Industrial Electronics Handbooks, 33-1-33–39. Boca Raton, FL: CRC Press, 2011.","van":"Jasperneite J, Mirabella O. INTERBUS. In: Industrial Electronics Handbooks. Boca Raton, FL: CRC Press; 2011. p. 33-1-33–9.","ama":"Jasperneite J, Mirabella O. INTERBUS. In: Industrial Electronics Handbooks. Boca Raton, FL: CRC Press; 2011:33-1-33-39.","ufg":"Jasperneite, Jürgen/Mirabella, Orazio (2011): INTERBUS, in: Industrial Electronics Handbooks, Boca Raton, FL, S. 33-1-33–9.","havard":"J. Jasperneite, O. Mirabella, INTERBUS, in: Industrial Electronics Handbooks, CRC Press, Boca Raton, FL, 2011: pp. 33-1-33–9.","mla":"Jasperneite, Jürgen, and Orazio Mirabella. “INTERBUS.” Industrial Electronics Handbooks, CRC Press, 2011, pp. 33-1-33–39.","bjps":"Jasperneite J and Mirabella O (2011) INTERBUS. Industrial Electronics Handbooks. Boca Raton, FL: CRC Press, pp. 33-1-33–39.","short":"J. Jasperneite, O. Mirabella, in: Industrial Electronics Handbooks, CRC Press, Boca Raton, FL, 2011, pp. 33-1-33–9.","din1505-2-1":"Jasperneite, Jürgen ; Mirabella, Orazio: INTERBUS. In: Industrial Electronics Handbooks. Boca Raton, FL : CRC Press, 2011, S. 33-1-33–9","chicago-de":"Jasperneite, Jürgen und Orazio Mirabella. 2011. INTERBUS. In: Industrial Electronics Handbooks, 33-1-33–9. Boca Raton, FL: CRC Press."},"place":"Boca Raton, FL","language":[{"iso":"eng"}],"_id":"4702","publication":"Industrial Electronics Handbooks","date_created":"2021-01-28T13:00:15Z","type":"book_chapter","user_id":"74222","date_updated":"2023-03-15T13:49:55Z"},{"title":"Systemmodelle für wandelbare Automatisierungssysteme","citation":{"ama":"Niggemann O, Jasperneite J. Systemmodelle für wandelbare Automatisierungssysteme. In: 8. Symposium Informationstechnologien Für Entwicklung Und Produktion in Der Verfahrenstechnik Dechema. Frankfurt; 2011.","ieee":"O. Niggemann and J. Jasperneite, “Systemmodelle für wandelbare Automatisierungssysteme,” in 8. Symposium Informationstechnologien für Entwicklung und Produktion in der Verfahrenstechnik Dechema, 2011.","short":"O. Niggemann, J. Jasperneite, in: 8. Symposium Informationstechnologien Für Entwicklung Und Produktion in Der Verfahrenstechnik Dechema, Frankfurt, 2011.","din1505-2-1":"Niggemann, Oliver ; Jasperneite, Jürgen: Systemmodelle für wandelbare Automatisierungssysteme. In: 8. Symposium Informationstechnologien für Entwicklung und Produktion in der Verfahrenstechnik Dechema : Frankfurt, 2011","chicago-de":"Niggemann, Oliver und Jürgen Jasperneite. 2011. Systemmodelle für wandelbare Automatisierungssysteme. In: 8. Symposium Informationstechnologien für Entwicklung und Produktion in der Verfahrenstechnik Dechema. Frankfurt.","van":"Niggemann O, Jasperneite J. Systemmodelle für wandelbare Automatisierungssysteme. In: 8 Symposium Informationstechnologien für Entwicklung und Produktion in der Verfahrenstechnik Dechema. Frankfurt; 2011.","havard":"O. Niggemann, J. Jasperneite, Systemmodelle für wandelbare Automatisierungssysteme, in: 8. Symposium Informationstechnologien Für Entwicklung Und Produktion in Der Verfahrenstechnik Dechema, Frankfurt, 2011.","bjps":"Niggemann O and Jasperneite J (2011) Systemmodelle Für Wandelbare Automatisierungssysteme. 8. Symposium Informationstechnologien Für Entwicklung Und Produktion in Der Verfahrenstechnik Dechema. Frankfurt.","mla":"Niggemann, Oliver, and Jürgen Jasperneite. “Systemmodelle Für Wandelbare Automatisierungssysteme.” 8. Symposium Informationstechnologien Für Entwicklung Und Produktion in Der Verfahrenstechnik Dechema, Frankfurt, 2011.","ufg":"Niggemann, Oliver/Jasperneite, Jürgen (2011): Systemmodelle für wandelbare Automatisierungssysteme, in: 8. Symposium Informationstechnologien für Entwicklung und Produktion in der Verfahrenstechnik Dechema.","apa":"Niggemann, O., & Jasperneite, J. (2011). Systemmodelle für wandelbare Automatisierungssysteme. In 8. Symposium Informationstechnologien für Entwicklung und Produktion in der Verfahrenstechnik Dechema. Frankfurt.","chicago":"Niggemann, Oliver, and Jürgen Jasperneite. “Systemmodelle Für Wandelbare Automatisierungssysteme.” In 8. Symposium Informationstechnologien Für Entwicklung Und Produktion in Der Verfahrenstechnik Dechema. Frankfurt, 2011."},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2011,"author":[{"first_name":"Oliver","last_name":"Niggemann","full_name":"Niggemann, Oliver","id":"10876"},{"first_name":"Jürgen","full_name":"Jasperneite, Jürgen","id":"1899","last_name":"Jasperneite"}],"status":"public","publisher":"Frankfurt","date_created":"2021-01-28T13:08:01Z","type":"conference","publication":"8. Symposium Informationstechnologien für Entwicklung und Produktion in der Verfahrenstechnik Dechema","date_updated":"2023-03-15T13:49:55Z","user_id":"74222","language":[{"iso":"eng"}],"_id":"4703"},{"language":[{"iso":"eng"}],"_id":"4704","date_updated":"2023-03-15T13:49:55Z","user_id":"74222","intvolume":" 2","type":"journal_article","date_created":"2021-01-28T13:11:43Z","publication":"Journal: MANAGEMENT AND PRODUCTION ENGINEERING REVIEW","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"last_name":"Wisniewski","first_name":"Lukasz","id":"1710","full_name":"Wisniewski, Lukasz"},{"last_name":"Trsek","first_name":"Henning","full_name":"Trsek, Henning","id":"1486"},{"full_name":"Jasperneite, Jürgen","first_name":"Jürgen","last_name":"Jasperneite","id":"1899"}],"year":2011,"issue":"1","citation":{"short":"L. Wisniewski, H. Trsek, J. Jasperneite, Journal: MANAGEMENT AND PRODUCTION ENGINEERING REVIEW 2 (2011).","din1505-2-1":"Wisniewski, Lukasz ; Trsek, Henning ; Jasperneite, Jürgen: Wireless local area networks and its impact on current and future production processes . In: Journal: MANAGEMENT AND PRODUCTION ENGINEERING REVIEW Bd. 2 (2011), Nr. 1","chicago-de":"Wisniewski, Lukasz, Henning Trsek und Jürgen Jasperneite. 2011. Wireless local area networks and its impact on current and future production processes . Journal: MANAGEMENT AND PRODUCTION ENGINEERING REVIEW 2, Nr. 1.","apa":"Wisniewski, L., Trsek, H., & Jasperneite, J. (2011). Wireless local area networks and its impact on current and future production processes . Journal: MANAGEMENT AND PRODUCTION ENGINEERING REVIEW, 2(1).","chicago":"Wisniewski, Lukasz, Henning Trsek, and Jürgen Jasperneite. “Wireless Local Area Networks and Its Impact on Current and Future Production Processes .” Journal: MANAGEMENT AND PRODUCTION ENGINEERING REVIEW 2, no. 1 (2011).","van":"Wisniewski L, Trsek H, Jasperneite J. Wireless local area networks and its impact on current and future production processes . Journal: MANAGEMENT AND PRODUCTION ENGINEERING REVIEW. 2011;2(1).","ufg":"Wisniewski, Lukasz et. al. (2011): Wireless local area networks and its impact on current and future production processes , in: Journal: MANAGEMENT AND PRODUCTION ENGINEERING REVIEW 2 (1).","mla":"Wisniewski, Lukasz, et al. “Wireless Local Area Networks and Its Impact on Current and Future Production Processes .” Journal: MANAGEMENT AND PRODUCTION ENGINEERING REVIEW, vol. 2, no. 1, 2011.","havard":"L. Wisniewski, H. Trsek, J. Jasperneite, Wireless local area networks and its impact on current and future production processes , Journal: MANAGEMENT AND PRODUCTION ENGINEERING REVIEW. 2 (2011).","bjps":"Wisniewski L, Trsek H and Jasperneite J (2011) Wireless Local Area Networks and Its Impact on Current and Future Production Processes . Journal: MANAGEMENT AND PRODUCTION ENGINEERING REVIEW 2.","ieee":"L. Wisniewski, H. Trsek, and J. Jasperneite, “Wireless local area networks and its impact on current and future production processes ,” Journal: MANAGEMENT AND PRODUCTION ENGINEERING REVIEW, vol. 2, no. 1, 2011.","ama":"Wisniewski L, Trsek H, Jasperneite J. Wireless local area networks and its impact on current and future production processes . Journal: MANAGEMENT AND PRODUCTION ENGINEERING REVIEW. 2011;2(1)."},"volume":2,"title":"Wireless local area networks and its impact on current and future production processes "},{"_id":"4705","language":[{"iso":"eng"}],"intvolume":" 6","user_id":"74222","date_updated":"2023-03-15T13:49:55Z","publication":"Elektronik","type":"journal_article","date_created":"2021-01-28T13:18:38Z","status":"public","year":2011,"author":[{"first_name":"Jan","full_name":"Deppe, Jan","last_name":"Deppe"},{"full_name":"Trsek, Henning","last_name":"Trsek","first_name":"Henning","id":"1486"},{"last_name":"Jasperneite","first_name":"Jürgen","full_name":"Jasperneite, Jürgen","id":"1899"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"volume":"06","citation":{"ieee":"J. Deppe, H. Trsek, and J. Jasperneite, “WLAN Geräte für die Industrie im Vergleich - Teil I,” Elektronik, vol. 06, 2011.","ama":"Deppe J, Trsek H, Jasperneite J. WLAN Geräte für die Industrie im Vergleich - Teil I. Elektronik. 2011;06.","chicago":"Deppe, Jan, Henning Trsek, and Jürgen Jasperneite. “WLAN Geräte Für Die Industrie Im Vergleich - Teil I.” Elektronik 06 (2011).","apa":"Deppe, J., Trsek, H., & Jasperneite, J. (2011). WLAN Geräte für die Industrie im Vergleich - Teil I. Elektronik, 06.","ufg":"Deppe, Jan et. al. (2011): WLAN Geräte für die Industrie im Vergleich - Teil I, in: Elektronik 06.","bjps":"Deppe J, Trsek H and Jasperneite J (2011) WLAN Geräte Für Die Industrie Im Vergleich - Teil I. Elektronik 06.","havard":"J. Deppe, H. Trsek, J. Jasperneite, WLAN Geräte für die Industrie im Vergleich - Teil I, Elektronik. 06 (2011).","mla":"Deppe, Jan, et al. “WLAN Geräte Für Die Industrie Im Vergleich - Teil I.” Elektronik, vol. 06, 2011.","van":"Deppe J, Trsek H, Jasperneite J. WLAN Geräte für die Industrie im Vergleich - Teil I. Elektronik. 2011;06.","din1505-2-1":"Deppe, Jan ; Trsek, Henning ; Jasperneite, Jürgen: WLAN Geräte für die Industrie im Vergleich - Teil I. In: Elektronik Bd. 06 (2011)","chicago-de":"Deppe, Jan, Henning Trsek und Jürgen Jasperneite. 2011. WLAN Geräte für die Industrie im Vergleich - Teil I. Elektronik 06.","short":"J. Deppe, H. Trsek, J. Jasperneite, Elektronik 06 (2011)."},"title":"WLAN Geräte für die Industrie im Vergleich - Teil I"},{"user_id":"74222","date_updated":"2023-03-15T13:49:55Z","publication":"8. Fachkonferenz AALE 2011","date_created":"2021-01-28T13:21:07Z","type":"conference","place":"Göppingen","language":[{"iso":"eng"}],"_id":"4706","citation":{"ieee":"S. Heymann, B. Lücke, and J. Jasperneite, “Lemgoer Modellfabrik: Innovationen der IT-basierten Automatisierungstechnik praktisch erproben und erlebbar machen,” in 8. Fachkonferenz AALE 2011, 2011.","ama":"Heymann S, Lücke B, Jasperneite J. Lemgoer Modellfabrik: Innovationen der IT-basierten Automatisierungstechnik praktisch erproben und erlebbar machen. In: 8. Fachkonferenz AALE 2011. Göppingen; 2011.","din1505-2-1":"Heymann, Sascha ; Lücke, Benedikt ; Jasperneite, Jürgen: Lemgoer Modellfabrik: Innovationen der IT-basierten Automatisierungstechnik praktisch erproben und erlebbar machen. In: 8. Fachkonferenz AALE 2011. Göppingen, 2011","chicago-de":"Heymann, Sascha, Benedikt Lücke und Jürgen Jasperneite. 2011. Lemgoer Modellfabrik: Innovationen der IT-basierten Automatisierungstechnik praktisch erproben und erlebbar machen. In: 8. Fachkonferenz AALE 2011. Göppingen.","short":"S. Heymann, B. Lücke, J. Jasperneite, in: 8. Fachkonferenz AALE 2011, Göppingen, 2011.","chicago":"Heymann, Sascha, Benedikt Lücke, and Jürgen Jasperneite. “Lemgoer Modellfabrik: Innovationen Der IT-Basierten Automatisierungstechnik Praktisch Erproben Und Erlebbar Machen.” In 8. Fachkonferenz AALE 2011. Göppingen, 2011.","apa":"Heymann, S., Lücke, B., & Jasperneite, J. (2011). Lemgoer Modellfabrik: Innovationen der IT-basierten Automatisierungstechnik praktisch erproben und erlebbar machen. In 8. Fachkonferenz AALE 2011. Göppingen.","ufg":"Heymann, Sascha et. al. (2011): Lemgoer Modellfabrik: Innovationen der IT-basierten Automatisierungstechnik praktisch erproben und erlebbar machen, in: 8. Fachkonferenz AALE 2011, Göppingen.","mla":"Heymann, Sascha, et al. “Lemgoer Modellfabrik: Innovationen Der IT-Basierten Automatisierungstechnik Praktisch Erproben Und Erlebbar Machen.” 8. Fachkonferenz AALE 2011, 2011.","bjps":"Heymann S, Lücke B and Jasperneite J (2011) Lemgoer Modellfabrik: Innovationen Der IT-Basierten Automatisierungstechnik Praktisch Erproben Und Erlebbar Machen. 8. Fachkonferenz AALE 2011. Göppingen.","havard":"S. Heymann, B. Lücke, J. Jasperneite, Lemgoer Modellfabrik: Innovationen der IT-basierten Automatisierungstechnik praktisch erproben und erlebbar machen, in: 8. Fachkonferenz AALE 2011, Göppingen, 2011.","van":"Heymann S, Lücke B, Jasperneite J. Lemgoer Modellfabrik: Innovationen der IT-basierten Automatisierungstechnik praktisch erproben und erlebbar machen. In: 8 Fachkonferenz AALE 2011. Göppingen; 2011."},"title":"Lemgoer Modellfabrik: Innovationen der IT-basierten Automatisierungstechnik praktisch erproben und erlebbar machen","status":"public","year":2011,"author":[{"last_name":"Heymann","first_name":"Sascha","full_name":"Heymann, Sascha"},{"last_name":"Lücke","first_name":"Benedikt","full_name":"Lücke, Benedikt","id":"11178"},{"last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"abstract":[{"lang":"eng","text":"Die Automatisierungstechnik ist Leitdisziplin für die Entwicklung intelligenter technischer Systeme. Es handelt sich jedoch um eine „versteckte“ Technik, die nicht unmittelbar erlebbar ist.nbsp; Dieser Umstand führt u.a. zu Akzeptanzproblemen in der Gesellschaft bis hin zu dem zunehmenden Problem junge Menschen für automatisierungsnahe Studiengänge zu begeistern. Gleichzeitig erfordern Forschungsfragen immer häufiger ein sehr gutes Verständnis der Systemumgebung und ein geeignetes Umfeld, um Forschungsergebnisse im Hinblick auf deren Systemkonformität zu untersuchen.nbsp; Am Beispiel der Lemgoer Modellfabrik, die gemeinsam vom Institut für industrielle Informationstechnik (inIT) der Hochschule OWL und dem Fraunhofer IOSB-INA im Lemgoer Centrum Industrial IT (CIIT) betrieben wird, sollen die Vorteile, aber auch die Grenzen eines aufwendigen apparativen Testfelds diskutiert werden. Für die Forschungsbereiche wandlungsfähige Maschinen, also der Erweiterung oder Anpassung von Maschinen mit minimaler Rüstzeit, dem energieoptimierten Betrieb von Maschinen und der Mensch-Maschine-Interaktion soll der Nutzen einer Modellfabrik für Forschungsfragen und die sich ergebende „Erlebbarkeit“ in diesem Beitrag vorgestellt werden"}]},{"status":"public","publisher":"Technische Hochschule Ostwestfalen-Lippe","department":[{"_id":"DEP5000"},{"_id":"DEP5023"},{"_id":"DEP5025"}],"year":2011,"author":[{"first_name":"Jan-Christopher","last_name":"Brand","full_name":"Brand, Jan-Christopher"}],"citation":{"van":"Brand J-C. Integration und Optimierung einer Implementierung zur Berechnung modularer Potenzen mit einer Nios II-Softcore-CPU. Lemgo: Technische Hochschule Ostwestfalen-Lippe; 2011.","mla":"Brand, Jan-Christopher. Integration Und Optimierung Einer Implementierung Zur Berechnung Modularer Potenzen Mit Einer Nios II-Softcore-CPU. Technische Hochschule Ostwestfalen-Lippe, 2011.","bjps":"Brand J-C (2011) Integration Und Optimierung Einer Implementierung Zur Berechnung Modularer Potenzen Mit Einer Nios II-Softcore-CPU. Lemgo: Technische Hochschule Ostwestfalen-Lippe.","havard":"J.-C. Brand, Integration und Optimierung einer Implementierung zur Berechnung modularer Potenzen mit einer Nios II-Softcore-CPU, Technische Hochschule Ostwestfalen-Lippe, Lemgo, 2011.","ufg":"Brand, Jan-Christopher (2011): Integration und Optimierung einer Implementierung zur Berechnung modularer Potenzen mit einer Nios II-Softcore-CPU, Lemgo.","apa":"Brand, J.-C. (2011). Integration und Optimierung einer Implementierung zur Berechnung modularer Potenzen mit einer Nios II-Softcore-CPU. Lemgo: Technische Hochschule Ostwestfalen-Lippe.","chicago":"Brand, Jan-Christopher. Integration Und Optimierung Einer Implementierung Zur Berechnung Modularer Potenzen Mit Einer Nios II-Softcore-CPU. Lemgo: Technische Hochschule Ostwestfalen-Lippe, 2011.","short":"J.-C. Brand, Integration Und Optimierung Einer Implementierung Zur Berechnung Modularer Potenzen Mit Einer Nios II-Softcore-CPU, Technische Hochschule Ostwestfalen-Lippe, Lemgo, 2011.","din1505-2-1":"Brand, Jan-Christopher: Integration und Optimierung einer Implementierung zur Berechnung modularer Potenzen mit einer Nios II-Softcore-CPU. Lemgo : Technische Hochschule Ostwestfalen-Lippe, 2011","chicago-de":"Brand, Jan-Christopher. 2011. Integration und Optimierung einer Implementierung zur Berechnung modularer Potenzen mit einer Nios II-Softcore-CPU. Lemgo: Technische Hochschule Ostwestfalen-Lippe.","ama":"Brand J-C. Integration Und Optimierung Einer Implementierung Zur Berechnung Modularer Potenzen Mit Einer Nios II-Softcore-CPU. Lemgo: Technische Hochschule Ostwestfalen-Lippe; 2011.","ieee":"J.-C. Brand, Integration und Optimierung einer Implementierung zur Berechnung modularer Potenzen mit einer Nios II-Softcore-CPU. Lemgo: Technische Hochschule Ostwestfalen-Lippe, 2011."},"title":"Integration und Optimierung einer Implementierung zur Berechnung modularer Potenzen mit einer Nios II-Softcore-CPU","language":[{"iso":"eng"}],"place":"Lemgo","_id":"8318","date_updated":"2023-03-15T13:50:14Z","user_id":"10982","date_created":"2022-05-30T15:48:50Z","type":"bachelor_thesis","supervisor":[{"id":"1031","full_name":"Heiss, Stefan","first_name":"Stefan","last_name":"Heiss"}]},{"citation":{"din1505-2-1":"Heiss, Stefan: IT-Sicherheit in der industriellen Automatisierungstechnik. In: 6. Innovationsforum „Automation als Innovationsmotor des deutschen Maschinenbaus“ OWL-Maschinenbau, 2011","chicago-de":"Heiss, Stefan. 2011. IT-Sicherheit in der industriellen Automatisierungstechnik. In: 6. Innovationsforum „Automation als Innovationsmotor des deutschen Maschinenbaus“ OWL-Maschinenbau.","short":"S. Heiss, in: 6. Innovationsforum “Automation Als Innovationsmotor Des Deutschen Maschinenbaus” OWL-Maschinenbau, 2011.","bjps":"Heiss S (2011) IT-Sicherheit in Der Industriellen Automatisierungstechnik. 6. Innovationsforum ‘Automation Als Innovationsmotor Des Deutschen Maschinenbaus’ OWL-Maschinenbau.","havard":"S. Heiss, IT-Sicherheit in der industriellen Automatisierungstechnik, in: 6. Innovationsforum “Automation Als Innovationsmotor Des Deutschen Maschinenbaus” OWL-Maschinenbau, 2011.","mla":"Heiss, Stefan. “ IT-Sicherheit in Der Industriellen Automatisierungstechnik.” 6. Innovationsforum “Automation Als Innovationsmotor Des Deutschen Maschinenbaus” OWL-Maschinenbau, 2011.","ufg":"Heiss, Stefan (2011): IT-Sicherheit in der industriellen Automatisierungstechnik, in: 6. Innovationsforum „Automation als Innovationsmotor des deutschen Maschinenbaus“ OWL-Maschinenbau.","ama":"Heiss S. IT-Sicherheit in der industriellen Automatisierungstechnik. In: 6. Innovationsforum “Automation Als Innovationsmotor Des Deutschen Maschinenbaus” OWL-Maschinenbau. ; 2011.","van":"Heiss S. IT-Sicherheit in der industriellen Automatisierungstechnik. In: 6 Innovationsforum “Automation als Innovationsmotor des deutschen Maschinenbaus” OWL-Maschinenbau. 2011.","chicago":"Heiss, Stefan. “ IT-Sicherheit in Der Industriellen Automatisierungstechnik.” In 6. Innovationsforum “Automation Als Innovationsmotor Des Deutschen Maschinenbaus” OWL-Maschinenbau, 2011.","ieee":"S. Heiss, “ IT-Sicherheit in der industriellen Automatisierungstechnik,” in 6. Innovationsforum “Automation als Innovationsmotor des deutschen Maschinenbaus” OWL-Maschinenbau, 2011.","apa":"Heiss, S. (2011). IT-Sicherheit in der industriellen Automatisierungstechnik. In 6. Innovationsforum “Automation als Innovationsmotor des deutschen Maschinenbaus” OWL-Maschinenbau."},"title":" IT-Sicherheit in der industriellen Automatisierungstechnik","status":"public","department":[{"_id":"DEP5000"},{"_id":"DEP5023"}],"author":[{"id":"1031","full_name":"Heiss, Stefan","first_name":"Stefan","last_name":"Heiss"}],"year":2011,"date_updated":"2023-03-15T13:50:00Z","user_id":"10982","type":"conference","date_created":"2021-04-19T09:49:16Z","publication":"6. Innovationsforum \"Automation als Innovationsmotor des deutschen Maschinenbaus\" OWL-Maschinenbau","language":[{"iso":"eng"}],"_id":"5610"},{"citation":{"ama":"Trsek H, Jasperneite J, Heiss S. RAvE - Real-Time Automation Networks in Moving Industrial Environments.; 2011.","ieee":"H. Trsek, J. Jasperneite, and S. Heiss, RAvE - Real-time automation networks in moving industrial environments. 2011.","short":"H. Trsek, J. Jasperneite, S. Heiss, RAvE - Real-Time Automation Networks in Moving Industrial Environments, 2011.","chicago-de":"Trsek, Henning, Jürgen Jasperneite und Stefan Heiss. 2011. RAvE - Real-time automation networks in moving industrial environments. Lemgoer Schriftenreihe zur industriellen Informationstechnik.","din1505-2-1":"Trsek, Henning ; Jasperneite, Jürgen ; Heiss, Stefan: RAvE - Real-time automation networks in moving industrial environments, Lemgoer Schriftenreihe zur industriellen Informationstechnik, 2011","van":"Trsek H, Jasperneite J, Heiss S. RAvE - Real-time automation networks in moving industrial environments. 2011. (Lemgoer Schriftenreihe zur industriellen Informationstechnik).","ufg":"Trsek, Henning et. al. (2011): RAvE - Real-time automation networks in moving industrial environments (=Lemgoer Schriftenreihe zur industriellen Informationstechnik).","mla":"Trsek, Henning, et al. RAvE - Real-Time Automation Networks in Moving Industrial Environments. 2011.","havard":"H. Trsek, J. Jasperneite, S. Heiss, RAvE - Real-time automation networks in moving industrial environments, 2011.","bjps":"Trsek H, Jasperneite J and Heiss S (2011) RAvE - Real-Time Automation Networks in Moving Industrial Environments. .","apa":"Trsek, H., Jasperneite, J., & Heiss, S. (2011). RAvE - Real-time automation networks in moving industrial environments.","chicago":"Trsek, Henning, Jürgen Jasperneite, and Stefan Heiss. RAvE - Real-Time Automation Networks in Moving Industrial Environments. Lemgoer Schriftenreihe Zur Industriellen Informationstechnik, 2011."},"series_title":"Lemgoer Schriftenreihe zur industriellen Informationstechnik","title":" RAvE - Real-time automation networks in moving industrial environments","status":"public","department":[{"_id":"DEP5000"},{"_id":"DEP5023"}],"author":[{"last_name":"Trsek","first_name":"Henning","full_name":"Trsek, Henning","id":"1486"},{"full_name":"Jasperneite, Jürgen","first_name":"Jürgen","id":"1899","last_name":"Jasperneite"},{"last_name":"Heiss","first_name":"Stefan","full_name":"Heiss, Stefan","id":"1031"}],"year":2011,"date_updated":"2023-03-15T13:50:00Z","user_id":"10982","date_created":"2021-04-19T09:50:58Z","type":"book","publication_identifier":{"issn":["1869-2087"]},"language":[{"iso":"eng"}],"_id":"5611"},{"status":"public","department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"conference":{"location":"Berlin;","name":"6. Fachtagung Arznei- und Gewürzpflanzen","start_date":"2011-09","end_date":"2011-09"},"author":[{"last_name":"Dammann_","id":"43899","full_name":"Dammann_, Anna","first_name":"Anna"},{"last_name":"Schwarzer","full_name":"Schwarzer, Knut","id":"13329","first_name":"Knut"},{"id":"12119","first_name":"Ulrich","full_name":"Müller, Ulrich","last_name":"Müller"},{"last_name":"Krüger","full_name":"Krüger, H.","first_name":"H."},{"last_name":"Langer","first_name":"H.","full_name":"Langer, H."}],"year":2011,"citation":{"chicago-de":"Dammann_, Anna, Knut Schwarzer, Ulrich Müller, H. Krüger und H. Langer. 2011. Schonende Entkeimung von Medizinaldrogen durch das Lemgoer Verfahren. In: .","din1505-2-1":"Dammann_, Anna ; Schwarzer, Knut ; Müller, Ulrich ; Krüger, H. ; Langer, H.: Schonende Entkeimung von Medizinaldrogen durch das Lemgoer Verfahren. In: , 2011","short":"A. Dammann_, K. Schwarzer, U. Müller, H. Krüger, H. Langer, in: 2011.","chicago":"Dammann_, Anna, Knut Schwarzer, Ulrich Müller, H. Krüger, and H. Langer. “Schonende Entkeimung von Medizinaldrogen Durch Das Lemgoer Verfahren,” 2011.","apa":"Dammann_, A., Schwarzer, K., Müller, U., Krüger, H., & Langer, H. (2011). Schonende Entkeimung von Medizinaldrogen durch das Lemgoer Verfahren. Presented at the 6. Fachtagung Arznei- und Gewürzpflanzen, Berlin;","ieee":"A. Dammann_, K. Schwarzer, U. Müller, H. Krüger, and H. Langer, “Schonende Entkeimung von Medizinaldrogen durch das Lemgoer Verfahren,” presented at the 6. Fachtagung Arznei- und Gewürzpflanzen, Berlin;, 2011.","ufg":"Dammann_, Anna et. al. (2011): Schonende Entkeimung von Medizinaldrogen durch das Lemgoer Verfahren, in: .","havard":"A. Dammann_, K. Schwarzer, U. Müller, H. Krüger, H. Langer, Schonende Entkeimung von Medizinaldrogen durch das Lemgoer Verfahren, in: 2011.","bjps":"Dammann_ A et al. (2011) Schonende Entkeimung von Medizinaldrogen Durch Das Lemgoer Verfahren.","mla":"Dammann_, Anna, et al. Schonende Entkeimung von Medizinaldrogen Durch Das Lemgoer Verfahren. 2011.","van":"Dammann_ A, Schwarzer K, Müller U, Krüger H, Langer H. Schonende Entkeimung von Medizinaldrogen durch das Lemgoer Verfahren. In 2011.","ama":"Dammann_ A, Schwarzer K, Müller U, Krüger H, Langer H. Schonende Entkeimung von Medizinaldrogen durch das Lemgoer Verfahren. In: ; 2011."},"title":"Schonende Entkeimung von Medizinaldrogen durch das Lemgoer Verfahren","_id":"6168","language":[{"iso":"eng"}],"date_updated":"2023-03-15T13:50:04Z","user_id":"45673","date_created":"2021-09-07T08:39:43Z","type":"conference"},{"date_created":"2021-09-07T08:43:07Z","type":"conference","date_updated":"2024-05-23T11:13:24Z","user_id":"83779","language":[{"iso":"eng"}],"_id":"6170","title":"Minimal Processing - Der Weg zur Produkt und Ressourcen schonenden Getränkepasteurisation","citation":{"ama":"Schneider J, Schwarzer K, Dammann_ A, Müller U, Voetz M. Minimal Processing - Der Weg zur Produkt und Ressourcen schonenden Getränkepasteurisation. In: ; 2011.","ieee":"J. Schneider, K. Schwarzer, A. Dammann_, U. Müller, and M. Voetz, “Minimal Processing - Der Weg zur Produkt und Ressourcen schonenden Getränkepasteurisation,” presented at the Fresenius Fachtagung Abfüllung sensibler Getränke, Berlin, 2011.","van":"Schneider J, Schwarzer K, Dammann_ A, Müller U, Voetz M. Minimal Processing - Der Weg zur Produkt und Ressourcen schonenden Getränkepasteurisation. In 2011.","bjps":"Schneider J et al. (2011) Minimal Processing - Der Weg Zur Produkt Und Ressourcen Schonenden Getränkepasteurisation.","havard":"J. Schneider, K. Schwarzer, A. Dammann_, U. Müller, M. Voetz, Minimal Processing - Der Weg zur Produkt und Ressourcen schonenden Getränkepasteurisation, in: 2011.","mla":"Schneider, Jan, et al. Minimal Processing - Der Weg Zur Produkt Und Ressourcen Schonenden Getränkepasteurisation. 2011.","ufg":"Schneider, Jan u. a.: Minimal Processing - Der Weg zur Produkt und Ressourcen schonenden Getränkepasteurisation, in: o. Hg.: o. O. 2011.","apa":"Schneider, J., Schwarzer, K., Dammann_, A., Müller, U., & Voetz, M. (2011). Minimal Processing - Der Weg zur Produkt und Ressourcen schonenden Getränkepasteurisation. Fresenius Fachtagung Abfüllung sensibler Getränke, Berlin.","chicago":"Schneider, Jan, Knut Schwarzer, Anna Dammann_, Ulrich Müller, and M. Voetz. “Minimal Processing - Der Weg Zur Produkt Und Ressourcen Schonenden Getränkepasteurisation,” 2011.","short":"J. Schneider, K. Schwarzer, A. Dammann_, U. Müller, M. Voetz, in: 2011.","din1505-2-1":"Schneider, Jan ; Schwarzer, Knut ; Dammann_, Anna ; Müller, Ulrich ; Voetz, M.: Minimal Processing - Der Weg zur Produkt und Ressourcen schonenden Getränkepasteurisation. In: , 2011","chicago-de":"Schneider, Jan, Knut Schwarzer, Anna Dammann_, Ulrich Müller und M. Voetz. 2011. Minimal Processing - Der Weg zur Produkt und Ressourcen schonenden Getränkepasteurisation. In: ."},"conference":{"name":"Fresenius Fachtagung Abfüllung sensibler Getränke","location":"Berlin","start_date":"2011-10-29","end_date":"2011-10-30"},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"},{"_id":"DEP4018"}],"year":"2011","author":[{"full_name":"Schneider, Jan","last_name":"Schneider","first_name":"Jan","id":"13209","orcid":"0000-0001-6401-8873"},{"full_name":"Schwarzer, Knut","id":"13329","last_name":"Schwarzer","first_name":"Knut"},{"full_name":"Dammann_, Anna","last_name":"Dammann_","id":"43899","first_name":"Anna"},{"last_name":"Müller","first_name":"Ulrich","full_name":"Müller, Ulrich","id":"12119"},{"first_name":"M.","last_name":"Voetz","full_name":"Voetz, M."}],"status":"public"},{"status":"public","page":"32-40","publisher":"Carl","year":"2011","author":[{"full_name":"Dammann_, Anna","id":"43899","last_name":"Dammann_","first_name":"Anna"},{"first_name":"Knut","full_name":"Schwarzer, Knut","id":"13329","last_name":"Schwarzer"},{"first_name":"Ulrich","last_name":"Müller","full_name":"Müller, Ulrich","id":"12119"},{"full_name":"Schneider, Jan","last_name":"Schneider","id":"13209","first_name":"Jan","orcid":"0000-0001-6401-8873"}],"department":[{"_id":"DEP4018"},{"_id":"DEP4009"},{"_id":"DEP4023"}],"citation":{"short":"A. Dammann_, K. Schwarzer, U. Müller, J. Schneider, Brewing science : the scientific organ of the Weihenstephan Scientific Centre of the TU Munich, of Versuchs- and Lehranstalt für Brauerei in Berlin (VLB), of the Scientific Station for Breweries in Munich, of the Veritas laboratory in Zurich, of Doemens wba-Technikum Gmbh in Graefelfing/Munich = Monatsschrift für Brauwissenschaft 64 (2011) 32–40.","din1505-2-1":"Dammann_, Anna ; Schwarzer, Knut ; Müller, Ulrich ; Schneider, Jan: Flash Pasteurization of Beer - a Critical Review. In: Brewing science : the scientific organ of the Weihenstephan Scientific Centre of the TU Munich, of Versuchs- and Lehranstalt für Brauerei in Berlin (VLB), of the Scientific Station for Breweries in Munich, of the Veritas laboratory in Zurich, of Doemens wba-Technikum Gmbh in Graefelfing/Munich = Monatsschrift für Brauwissenschaft Bd. 64, Carl (2011), S. 32–40","chicago-de":"Dammann_, Anna, Knut Schwarzer, Ulrich Müller und Jan Schneider. 2011. Flash Pasteurization of Beer - a Critical Review. Brewing science : the scientific organ of the Weihenstephan Scientific Centre of the TU Munich, of Versuchs- and Lehranstalt für Brauerei in Berlin (VLB), of the Scientific Station for Breweries in Munich, of the Veritas laboratory in Zurich, of Doemens wba-Technikum Gmbh in Graefelfing/Munich = Monatsschrift für Brauwissenschaft 64: 32–40.","van":"Dammann_ A, Schwarzer K, Müller U, Schneider J. Flash Pasteurization of Beer - a Critical Review. Brewing science : the scientific organ of the Weihenstephan Scientific Centre of the TU Munich, of Versuchs- and Lehranstalt für Brauerei in Berlin (VLB), of the Scientific Station for Breweries in Munich, of the Veritas laboratory in Zurich, of Doemens wba-Technikum Gmbh in Graefelfing/Munich = Monatsschrift für Brauwissenschaft . 2011;64:32–40.","ama":"Dammann_ A, Schwarzer K, Müller U, Schneider J. Flash Pasteurization of Beer - a Critical Review. Brewing science : the scientific organ of the Weihenstephan Scientific Centre of the TU Munich, of Versuchs- and Lehranstalt für Brauerei in Berlin (VLB), of the Scientific Station for Breweries in Munich, of the Veritas laboratory in Zurich, of Doemens wba-Technikum Gmbh in Graefelfing/Munich = Monatsschrift für Brauwissenschaft . 2011;64:32-40.","ufg":"Dammann_, Anna u. a.: Flash Pasteurization of Beer - a Critical Review, in: Brewing science : the scientific organ of the Weihenstephan Scientific Centre of the TU Munich, of Versuchs- and Lehranstalt für Brauerei in Berlin (VLB), of the Scientific Station for Breweries in Munich, of the Veritas laboratory in Zurich, of Doemens wba-Technikum Gmbh in Graefelfing/Munich = Monatsschrift für Brauwissenschaft 64 (2011), S. 32–40.","havard":"A. Dammann_, K. Schwarzer, U. Müller, J. Schneider, Flash Pasteurization of Beer - a Critical Review, Brewing science : the scientific organ of the Weihenstephan Scientific Centre of the TU Munich, of Versuchs- and Lehranstalt für Brauerei in Berlin (VLB), of the Scientific Station for Breweries in Munich, of the Veritas laboratory in Zurich, of Doemens wba-Technikum Gmbh in Graefelfing/Munich = Monatsschrift für Brauwissenschaft . 64 (2011) 32–40.","bjps":"Dammann_ A et al. (2011) Flash Pasteurization of Beer - a Critical Review. Brewing science : the scientific organ of the Weihenstephan Scientific Centre of the TU Munich, of Versuchs- and Lehranstalt für Brauerei in Berlin (VLB), of the Scientific Station for Breweries in Munich, of the Veritas laboratory in Zurich, of Doemens wba-Technikum Gmbh in Graefelfing/Munich = Monatsschrift für Brauwissenschaft 64, 32–40.","mla":"Dammann_, Anna, et al. “Flash Pasteurization of Beer - a Critical Review.” Brewing science : the scientific organ of the Weihenstephan Scientific Centre of the TU Munich, of Versuchs- and Lehranstalt für Brauerei in Berlin (VLB), of the Scientific Station for Breweries in Munich, of the Veritas laboratory in Zurich, of Doemens wba-Technikum Gmbh in Graefelfing/Munich = Monatsschrift für Brauwissenschaft , vol. 64, 2011, pp. 32–40.","apa":"Dammann_, A., Schwarzer, K., Müller, U., & Schneider, J. (2011). Flash Pasteurization of Beer - a Critical Review. Brewing science : the scientific organ of the Weihenstephan Scientific Centre of the TU Munich, of Versuchs- and Lehranstalt für Brauerei in Berlin (VLB), of the Scientific Station for Breweries in Munich, of the Veritas laboratory in Zurich, of Doemens wba-Technikum Gmbh in Graefelfing/Munich = Monatsschrift für Brauwissenschaft , 64, 32–40.","ieee":"A. Dammann_, K. Schwarzer, U. Müller, and J. Schneider, “Flash Pasteurization of Beer - a Critical Review,” Brewing science : the scientific organ of the Weihenstephan Scientific Centre of the TU Munich, of Versuchs- and Lehranstalt für Brauerei in Berlin (VLB), of the Scientific Station for Breweries in Munich, of the Veritas laboratory in Zurich, of Doemens wba-Technikum Gmbh in Graefelfing/Munich = Monatsschrift für Brauwissenschaft , vol. 64, pp. 32–40, 2011.","chicago":"Dammann_, Anna, Knut Schwarzer, Ulrich Müller, and Jan Schneider. “Flash Pasteurization of Beer - a Critical Review.” Brewing science : the scientific organ of the Weihenstephan Scientific Centre of the TU Munich, of Versuchs- and Lehranstalt für Brauerei in Berlin (VLB), of the Scientific Station for Breweries in Munich, of the Veritas laboratory in Zurich, of Doemens wba-Technikum Gmbh in Graefelfing/Munich = Monatsschrift für Brauwissenschaft 64 (2011): 32–40."},"volume":64,"publication_status":"published","title":"Flash Pasteurization of Beer - a Critical Review","language":[{"iso":"ger"}],"_id":"6206","user_id":"83781","date_updated":"2025-01-30T15:22:24Z","related_material":{"link":[{"url":"https://www.researchgate.net/publication/287852744_Flash_pasteurization_of_beer_-_A_critical_review","relation":"confirmation"}]},"intvolume":" 64","publication":"Brewing science : the scientific organ of the Weihenstephan Scientific Centre of the TU Munich, of Versuchs- and Lehranstalt für Brauerei in Berlin (VLB), of the Scientific Station for Breweries in Munich, of the Veritas laboratory in Zurich, of Doemens wba-Technikum Gmbh in Graefelfing/Munich = Monatsschrift für Brauwissenschaft ","publication_identifier":{"issn":["1866-5195 "]},"date_created":"2021-09-14T09:41:29Z","type":"journal_article"},{"citation":{"van":"Wesemann D, Gleissner M, Söllner M, Witte S, Michels JS, Schmidt R, et al. Hocheffiziente, kontaktlose Energie- und Datenübertragung – Systemgestaltung für anreihbare Automatisierungskomponenten. AALE, Hochschule Esslingen, Kompetenznetzwerk Mechatronik BW , Verein der Freunde und Förderer der Angewandten Automatisierungstechnik an Fachhochschulen, editors. Tagungsband - AALE 2011 : 8. Fachkonferenz, Göppingen ; das Forum für Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft . München: Oldenbourg-Industrieverl. ; 2011.","bjps":"Wesemann D et al. (2011) Hocheffiziente, kontaktlose Energie- und Datenübertragung – Systemgestaltung für anreihbare Automatisierungskomponenten, AALE et al. (eds). München: Oldenbourg-Industrieverl. .","havard":"D. Wesemann, M. Gleissner, M. Söllner, S. Witte, J.-S. Michels, R. Schmidt, H.-P. Schmidt, Hocheffiziente, kontaktlose Energie- und Datenübertragung – Systemgestaltung für anreihbare Automatisierungskomponenten, Oldenbourg-Industrieverl. , München, 2011.","mla":"Wesemann, Derk, et al. “Hocheffiziente, kontaktlose Energie- und Datenübertragung – Systemgestaltung für anreihbare Automatisierungskomponenten.” Tagungsband - AALE 2011 : 8. Fachkonferenz, Göppingen ; das Forum für Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft , edited by AALE et al., Oldenbourg-Industrieverl. , 2011, pp. 361–70.","ufg":"Wesemann, Derk u. a.: Hocheffiziente, kontaktlose Energie- und Datenübertragung – Systemgestaltung für anreihbare Automatisierungskomponenten, hg. von AALE u. a., München 2011.","apa":"Wesemann, D., Gleissner, M., Söllner, M., Witte, S., Michels, J.-S., Schmidt, R., & Schmidt, H.-P. (2011). Hocheffiziente, kontaktlose Energie- und Datenübertragung – Systemgestaltung für anreihbare Automatisierungskomponenten. In AALE, Hochschule Esslingen, Kompetenznetzwerk Mechatronik BW , & Verein der Freunde und Förderer der Angewandten Automatisierungstechnik an Fachhochschulen (Eds.), Tagungsband - AALE 2011 : 8. Fachkonferenz, Göppingen ; das Forum für Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft (pp. 361–370). Oldenbourg-Industrieverl. .","chicago":"Wesemann, Derk, Michael Gleissner, Matthias Söllner, Stefan Witte, Jan-Stefan Michels, Rüdiger Schmidt, and Hans-Peter Schmidt. Hocheffiziente, kontaktlose Energie- und Datenübertragung – Systemgestaltung für anreihbare Automatisierungskomponenten. Edited by AALE, Hochschule Esslingen, Kompetenznetzwerk Mechatronik BW , and Verein der Freunde und Förderer der Angewandten Automatisierungstechnik an Fachhochschulen. Tagungsband - AALE 2011 : 8. Fachkonferenz, Göppingen ; das Forum für Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft . München: Oldenbourg-Industrieverl. , 2011.","short":"D. Wesemann, M. Gleissner, M. Söllner, S. Witte, J.-S. Michels, R. Schmidt, H.-P. Schmidt, Hocheffiziente, kontaktlose Energie- und Datenübertragung – Systemgestaltung für anreihbare Automatisierungskomponenten, Oldenbourg-Industrieverl. , München, 2011.","chicago-de":"Wesemann, Derk, Michael Gleissner, Matthias Söllner, Stefan Witte, Jan-Stefan Michels, Rüdiger Schmidt und Hans-Peter Schmidt. 2011. Hocheffiziente, kontaktlose Energie- und Datenübertragung – Systemgestaltung für anreihbare Automatisierungskomponenten. Hg. von AALE, Hochschule Esslingen, Kompetenznetzwerk Mechatronik BW , und Verein der Freunde und Förderer der Angewandten Automatisierungstechnik an Fachhochschulen. Tagungsband - AALE 2011 : 8. Fachkonferenz, Göppingen ; das Forum für Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft . München: Oldenbourg-Industrieverl. .","din1505-2-1":"Wesemann, Derk ; Gleissner, Michael ; Söllner, Matthias ; Witte, Stefan ; Michels, Jan-Stefan ; Schmidt, Rüdiger ; Schmidt, Hans-Peter ; AALE ; Hochschule Esslingen ; Kompetenznetzwerk Mechatronik BW ; Verein der Freunde und Förderer der Angewandten Automatisierungstechnik an Fachhochschulen (Hrsg.): Hocheffiziente, kontaktlose Energie- und Datenübertragung – Systemgestaltung für anreihbare Automatisierungskomponenten. München : Oldenbourg-Industrieverl. , 2011","ama":"Wesemann D, Gleissner M, Söllner M, et al. Hocheffiziente, kontaktlose Energie- und Datenübertragung – Systemgestaltung für anreihbare Automatisierungskomponenten. ( AALE, Hochschule Esslingen, Kompetenznetzwerk Mechatronik BW , Verein der Freunde und Förderer der Angewandten Automatisierungstechnik an Fachhochschulen, eds.). Oldenbourg-Industrieverl. ; 2011:361-370.","ieee":"D. Wesemann et al., Hocheffiziente, kontaktlose Energie- und Datenübertragung – Systemgestaltung für anreihbare Automatisierungskomponenten. München: Oldenbourg-Industrieverl. , 2011, pp. 361–370."},"title":"Hocheffiziente, kontaktlose Energie- und Datenübertragung – Systemgestaltung für anreihbare Automatisierungskomponenten","status":"public","page":"361-370","year":"2011","author":[{"first_name":"Derk","full_name":"Wesemann, Derk","last_name":"Wesemann","id":"1273"},{"first_name":"Michael","last_name":"Gleissner","full_name":"Gleissner, Michael"},{"last_name":"Söllner","full_name":"Söllner, Matthias","first_name":"Matthias"},{"last_name":"Witte","id":"1605","full_name":"Witte, Stefan","first_name":"Stefan"},{"last_name":"Michels","first_name":"Jan-Stefan","full_name":"Michels, Jan-Stefan"},{"last_name":"Schmidt","first_name":"Rüdiger","full_name":"Schmidt, Rüdiger"},{"full_name":"Schmidt, Hans-Peter","first_name":"Hans-Peter","last_name":"Schmidt"}],"corporate_editor":[" AALE"," Hochschule Esslingen"," Kompetenznetzwerk Mechatronik BW ","Verein der Freunde und Förderer der Angewandten Automatisierungstechnik an Fachhochschulen"],"related_material":{"link":[{"relation":"confirmation","url":"https://www.researchgate.net/publication/266468273_Hocheffiziente_kontaktlose_Energie-_und_Datenubertragung_-_Systemgestaltung_fur_anreihbare_Automatisierungskomponenten"}]},"date_updated":"2023-08-03T13:24:34Z","publication_identifier":{"isbn":["978-3-8356-3321-6"]},"publication":"Tagungsband - AALE 2011 : 8. Fachkonferenz, Göppingen ; das Forum für Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft ","date_created":"2023-07-27T10:38:07Z","language":[{"iso":"ger"}],"publication_status":"published","publisher":" Oldenbourg-Industrieverl. ","conference":{"name":"8. AALE-Fachkonferenz ","location":"Göppingen","end_date":"2012-05-05","start_date":"2012-05-04"},"department":[{"_id":"DEP5000"},{"_id":"DEP5023"}],"user_id":"83781","type":"conference_editor_article","_id":"10160","place":"München"},{"language":[{"iso":"eng"}],"_id":"10161","user_id":"83781","date_updated":"2024-11-15T07:27:05Z","date_created":"2023-07-27T10:43:16Z","type":"conference_speech","status":"public","author":[{"full_name":"Schmelter, Andreas","last_name":"Schmelter","id":"10982","first_name":"Andreas"},{"last_name":"Ahmad","full_name":"Ahmad, Kaleem","first_name":"Kaleem"},{"full_name":"Grotekemper, Michael","first_name":"Michael","last_name":"Grotekemper"},{"first_name":"Adrian","last_name":"Riegel","full_name":"Riegel, Adrian","id":"14647"},{"id":"1605","full_name":"Witte, Stefan","first_name":"Stefan","last_name":"Witte"}],"year":"2011","conference":{"location":"IWMS","name":"20th International Workshop on Matrices and Statistics"},"department":[{"_id":"DEP5000"},{"_id":"DEP5023"}],"citation":{"ieee":"A. Schmelter, K. Ahmad, M. Grotekemper, A. Riegel, and S. Witte, FuLOG – Radio Based Data Logger For Integration In Production Processes. 2011.","ama":"Schmelter A, Ahmad K, Grotekemper M, Riegel A, Witte S. FuLOG – Radio Based Data Logger For Integration In Production Processes.; 2011.","chicago-de":"Schmelter, Andreas, Kaleem Ahmad, Michael Grotekemper, Adrian Riegel und Stefan Witte. 2011. FuLOG – Radio Based Data Logger For Integration In Production Processes.","din1505-2-1":"Schmelter, Andreas ; Ahmad, Kaleem ; Grotekemper, Michael ; Riegel, Adrian ; Witte, Stefan: FuLOG – Radio Based Data Logger For Integration In Production Processes, 2011","short":"A. Schmelter, K. Ahmad, M. Grotekemper, A. Riegel, S. Witte, FuLOG – Radio Based Data Logger For Integration In Production Processes, 2011.","chicago":"Schmelter, Andreas, Kaleem Ahmad, Michael Grotekemper, Adrian Riegel, and Stefan Witte. FuLOG – Radio Based Data Logger For Integration In Production Processes, 2011.","apa":"Schmelter, A., Ahmad, K., Grotekemper, M., Riegel, A., & Witte, S. (2011). FuLOG – Radio Based Data Logger For Integration In Production Processes. 20th International Workshop on Matrices and Statistics, IWMS.","ufg":"Schmelter, Andreas u. a.: FuLOG – Radio Based Data Logger For Integration In Production Processes, o. O. 2011.","havard":"A. Schmelter, K. Ahmad, M. Grotekemper, A. Riegel, S. Witte, FuLOG – Radio Based Data Logger For Integration In Production Processes, 2011.","mla":"Schmelter, Andreas, et al. FuLOG – Radio Based Data Logger For Integration In Production Processes. 2011.","bjps":"Schmelter A et al. (2011) FuLOG – Radio Based Data Logger For Integration In Production Processes. .","van":"Schmelter A, Ahmad K, Grotekemper M, Riegel A, Witte S. FuLOG – Radio Based Data Logger For Integration In Production Processes. 2011."},"publication_status":"published","title":"FuLOG – Radio Based Data Logger For Integration In Production Processes"},{"language":[{"iso":"eng"}],"_id":"4809","date_updated":"2023-03-15T13:49:55Z","user_id":"68554","date_created":"2021-02-02T09:18:06Z","type":"conference","status":"public","department":[{"_id":"DEP5023"}],"author":[{"full_name":"Gräser, Olaf","last_name":"Gräser","first_name":"Olaf"},{"full_name":"Kumar, Barath","first_name":"Barath","last_name":"Kumar"},{"first_name":"Natalia","last_name":"Moriz","full_name":"Moriz, Natalia","id":"44238"},{"id":"11158","full_name":"Maier, Alexander","last_name":"Maier","first_name":"Alexander"},{"last_name":"Niggemann","id":"10876","first_name":"Oliver","full_name":"Niggemann, Oliver"}],"year":2011,"citation":{"ieee":"O. Gräser, B. Kumar, N. Moriz, A. Maier, and O. Niggemann, “AutomationML as a Basis for Offline- and Realtime-Simulation,” 2011.","ama":"Gräser O, Kumar B, Moriz N, Maier A, Niggemann O. AutomationML as a Basis for Offline- and Realtime-Simulation. In: ; 2011.","apa":"Gräser, O., Kumar, B., Moriz, N., Maier, A., & Niggemann, O. (2011). AutomationML as a Basis for Offline- and Realtime-Simulation.","chicago":"Gräser, Olaf, Barath Kumar, Natalia Moriz, Alexander Maier, and Oliver Niggemann. “AutomationML as a Basis for Offline- and Realtime-Simulation,” 2011.","van":"Gräser O, Kumar B, Moriz N, Maier A, Niggemann O. AutomationML as a Basis for Offline- and Realtime-Simulation. In 2011.","ufg":"Gräser, Olaf et. al. (2011): AutomationML as a Basis for Offline- and Realtime-Simulation, in: .","bjps":"Gräser O et al. (2011) AutomationML as a Basis for Offline- and Realtime-Simulation.","havard":"O. Gräser, B. Kumar, N. Moriz, A. Maier, O. Niggemann, AutomationML as a Basis for Offline- and Realtime-Simulation, in: 2011.","mla":"Gräser, Olaf, et al. AutomationML as a Basis for Offline- and Realtime-Simulation. 2011.","short":"O. Gräser, B. Kumar, N. Moriz, A. Maier, O. Niggemann, in: 2011.","chicago-de":"Gräser, Olaf, Barath Kumar, Natalia Moriz, Alexander Maier und Oliver Niggemann. 2011. AutomationML as a Basis for Offline- and Realtime-Simulation. In: .","din1505-2-1":"Gräser, Olaf ; Kumar, Barath ; Moriz, Natalia ; Maier, Alexander ; Niggemann, Oliver: AutomationML as a Basis for Offline- and Realtime-Simulation. In: , 2011"},"title":"AutomationML as a Basis for Offline- and Realtime-Simulation"},{"user_id":"68554","date_updated":"2023-03-15T13:49:55Z","publication":"VDI Kongress AUTOMATION 2011 ","type":"conference","date_created":"2021-02-02T09:19:23Z","language":[{"iso":"eng"}],"_id":"4810","citation":{"ama":"Moriz N, Faltinski S, Gräser O, Niggemann O, Barth M, Fay A. Integration und Anwendung von objektorientierten Simulationsmodellen in AutomationML. In: VDI Kongress AUTOMATION 2011 . Baden Baden; 2011.","ieee":"N. Moriz, S. Faltinski, O. Gräser, O. Niggemann, M. Barth, and A. Fay, “Integration und Anwendung von objektorientierten Simulationsmodellen in AutomationML,” in VDI Kongress AUTOMATION 2011 , 2011.","van":"Moriz N, Faltinski S, Gräser O, Niggemann O, Barth M, Fay A. Integration und Anwendung von objektorientierten Simulationsmodellen in AutomationML. In: VDI Kongress AUTOMATION 2011 . Baden Baden; 2011.","havard":"N. Moriz, S. Faltinski, O. Gräser, O. Niggemann, M. Barth, A. Fay, Integration und Anwendung von objektorientierten Simulationsmodellen in AutomationML, in: VDI Kongress AUTOMATION 2011 , Baden Baden, 2011.","bjps":"Moriz N et al. (2011) Integration Und Anwendung von Objektorientierten Simulationsmodellen in AutomationML. VDI Kongress AUTOMATION 2011 . Baden Baden.","mla":"Moriz, Natalia, et al. “Integration Und Anwendung von Objektorientierten Simulationsmodellen in AutomationML.” VDI Kongress AUTOMATION 2011 , Baden Baden, 2011.","ufg":"Moriz, Natalia et. al. (2011): Integration und Anwendung von objektorientierten Simulationsmodellen in AutomationML, in: VDI Kongress AUTOMATION 2011 .","apa":"Moriz, N., Faltinski, S., Gräser, O., Niggemann, O., Barth, M., & Fay, A. (2011). Integration und Anwendung von objektorientierten Simulationsmodellen in AutomationML. In VDI Kongress AUTOMATION 2011 . Baden Baden.","chicago":"Moriz, Natalia, Sebastian Faltinski, Olaf Gräser, Oliver Niggemann, Mike Barth, and Alexander Fay. “Integration Und Anwendung von Objektorientierten Simulationsmodellen in AutomationML.” In VDI Kongress AUTOMATION 2011 . Baden Baden, 2011.","short":"N. Moriz, S. Faltinski, O. Gräser, O. Niggemann, M. Barth, A. Fay, in: VDI Kongress AUTOMATION 2011 , Baden Baden, 2011.","chicago-de":"Moriz, Natalia, Sebastian Faltinski, Olaf Gräser, Oliver Niggemann, Mike Barth und Alexander Fay. 2011. Integration und Anwendung von objektorientierten Simulationsmodellen in AutomationML. In: VDI Kongress AUTOMATION 2011 . Baden Baden.","din1505-2-1":"Moriz, Natalia ; Faltinski, Sebastian ; Gräser, Olaf ; Niggemann, Oliver ; Barth, Mike ; Fay, Alexander: Integration und Anwendung von objektorientierten Simulationsmodellen in AutomationML. In: VDI Kongress AUTOMATION 2011 : Baden Baden, 2011"},"title":"Integration und Anwendung von objektorientierten Simulationsmodellen in AutomationML","status":"public","publisher":"Baden Baden","author":[{"first_name":"Natalia","last_name":"Moriz","full_name":"Moriz, Natalia","id":"44238"},{"last_name":"Faltinski","first_name":"Sebastian","full_name":"Faltinski, Sebastian"},{"first_name":"Olaf","full_name":"Gräser, Olaf","last_name":"Gräser"},{"first_name":"Oliver","id":"10876","full_name":"Niggemann, Oliver","last_name":"Niggemann"},{"first_name":"Mike","last_name":"Barth","full_name":"Barth, Mike"},{"first_name":"Alexander","full_name":"Fay, Alexander","last_name":"Fay"}],"year":2011,"department":[{"_id":"DEP5023"}]},{"publication_identifier":{"eissn":["1437-0999"],"issn":["0932-8351"]},"publication":"Die Bautechnik","type":"journal_article","date_created":"2021-03-08T14:38:20Z","intvolume":" 88","user_id":"45673","date_updated":"2023-03-15T13:49:58Z","_id":"5262","language":[{"iso":"ger"}],"title":"European Facade Network (EFN) : interdisziplinäre Kooperation im europäischen Kontext","volume":88,"citation":{"chicago":"Strauß, Holger, and Uta Pottgiesser. “European Facade Network (EFN) : interdisziplinäre Kooperation im europäischen Kontext.” Die Bautechnik 88, no. 9 (2011).","ieee":"H. Strauß and U. Pottgiesser, “European Facade Network (EFN) : interdisziplinäre Kooperation im europäischen Kontext,” Die Bautechnik, vol. 88, no. 9, 2011.","apa":"Strauß, H., & Pottgiesser, U. (2011). European Facade Network (EFN) : interdisziplinäre Kooperation im europäischen Kontext. Die Bautechnik, 88(9).","bjps":"Strauß H and Pottgiesser U (2011) European Facade Network (EFN) : interdisziplinäre Kooperation im europäischen Kontext. Die Bautechnik 88.","havard":"H. Strauß, U. Pottgiesser, European Facade Network (EFN) : interdisziplinäre Kooperation im europäischen Kontext, Die Bautechnik. 88 (2011).","mla":"Strauß, Holger, and Uta Pottgiesser. “European Facade Network (EFN) : interdisziplinäre Kooperation im europäischen Kontext.” Die Bautechnik, vol. 88, no. 9, 2011.","ufg":"Strauß, Holger/Pottgiesser, Uta (2011): European Facade Network (EFN) : interdisziplinäre Kooperation im europäischen Kontext, in: Die Bautechnik 88 (9).","ama":"Strauß H, Pottgiesser U. European Facade Network (EFN) : interdisziplinäre Kooperation im europäischen Kontext. Die Bautechnik. 2011;88(9).","van":"Strauß H, Pottgiesser U. European Facade Network (EFN) : interdisziplinäre Kooperation im europäischen Kontext. Die Bautechnik. 2011;88(9).","din1505-2-1":"Strauß, Holger ; Pottgiesser, Uta: European Facade Network (EFN) : interdisziplinäre Kooperation im europäischen Kontext. In: Die Bautechnik Bd. 88 (2011), Nr. 9","chicago-de":"Strauß, Holger und Uta Pottgiesser. 2011. European Facade Network (EFN) : interdisziplinäre Kooperation im europäischen Kontext. Die Bautechnik 88, Nr. 9.","short":"H. Strauß, U. Pottgiesser, Die Bautechnik 88 (2011)."},"publication_status":"published","issue":"9","author":[{"last_name":"Strauß","first_name":"Holger","full_name":"Strauß, Holger"},{"first_name":"Uta","last_name":"Pottgiesser","id":"27166","full_name":"Pottgiesser, Uta","orcid":"0000-0002-8594-3168"}],"year":2011,"department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"status":"public"},{"title":" facade2011 - super green. conference volume : ConstructionLab ","citation":{"havard":"U. Pottgiesser, ed., facade2011 - super green. conference volume : ConstructionLab , Hochschule OWL , Detmold , 2011.","mla":"Pottgiesser, Uta, editor. Facade2011 - Super Green. Conference Volume : ConstructionLab . Hochschule OWL , 2011, p. 177 Seiten.","bjps":"Pottgiesser U (ed.) (2011) Facade2011 - Super Green. Conference Volume : ConstructionLab . Detmold : Hochschule OWL .","ufg":"Pottgiesser, Uta (Hg.) (2011): facade2011 - super green. conference volume : ConstructionLab , Detmold .","ama":"Pottgiesser U, ed. Facade2011 - Super Green. Conference Volume : ConstructionLab . Detmold : Hochschule OWL ; 2011:177 Seiten.","van":"Pottgiesser U, editor. facade2011 - super green. conference volume : ConstructionLab . Detmold : Hochschule OWL ; 2011.","chicago":"Pottgiesser, Uta, ed. Facade2011 - Super Green. Conference Volume : ConstructionLab . Detmold : Hochschule OWL , 2011.","ieee":"U. Pottgiesser, Ed., facade2011 - super green. conference volume : ConstructionLab . Detmold : Hochschule OWL , 2011, p. 177 Seiten.","apa":"Pottgiesser, U. (Ed.). (2011). facade2011 - super green. conference volume : ConstructionLab (p. 177 Seiten). Detmold : Hochschule OWL .","din1505-2-1":"Pottgiesser, U. (Hrsg.): facade2011 - super green. conference volume : ConstructionLab . Detmold : Hochschule OWL , 2011","chicago-de":"Pottgiesser, Uta, Hrsg. 2011. facade2011 - super green. conference volume : ConstructionLab . Detmold : Hochschule OWL .","short":"U. Pottgiesser, ed., Facade2011 - Super Green. Conference Volume : ConstructionLab , Hochschule OWL , Detmold , 2011."},"publication_status":"published","year":2011,"department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"publisher":" Hochschule OWL ","status":"public","page":" 177 Seiten ","publication_identifier":{"isbn":[" 978-3-939349-17-4 "]},"type":"conference_editor","date_created":"2021-03-08T14:44:28Z","editor":[{"last_name":"Pottgiesser","first_name":"Uta","id":"27166","full_name":"Pottgiesser, Uta","orcid":"0000-0002-8594-3168"}],"user_id":"45673","date_updated":"2023-03-15T13:49:58Z","_id":"5263","place":" Detmold ","language":[{"iso":"eng"}]},{"date_updated":"2023-03-15T13:49:58Z","user_id":"45673","intvolume":" 36","date_created":"2021-03-08T14:48:46Z","type":"journal_article","publication":"Journal of Interior Design","publication_identifier":{"issn":["1939-1668"],"eissn":["1071-7641"]},"language":[{"iso":"eng"}],"doi":"10.1111/j.1939-1668.2011.01062.x","_id":"5265","publication_status":"published","citation":{"ama":"Pottgiesser U. Interior design as an academic discipline in Germany. Journal of Interior Design. 2011;36(4):5-14. doi:10.1111/j.1939-1668.2011.01062.x","ieee":"U. Pottgiesser, “Interior design as an academic discipline in Germany,” Journal of Interior Design, vol. 36, no. 4, pp. 5–14, 2011.","chicago-de":"Pottgiesser, Uta. 2011. Interior design as an academic discipline in Germany. Journal of Interior Design 36, Nr. 4: 5–14. doi:10.1111/j.1939-1668.2011.01062.x, .","din1505-2-1":"Pottgiesser, Uta: Interior design as an academic discipline in Germany. In: Journal of Interior Design Bd. 36, Wiley-Blackwell (2011), Nr. 4, S. 5–14","short":"U. Pottgiesser, Journal of Interior Design 36 (2011) 5–14.","ufg":"Pottgiesser, Uta (2011): Interior design as an academic discipline in Germany, in: Journal of Interior Design 36 (4), S. 5–14.","mla":"Pottgiesser, Uta. “Interior Design as an Academic Discipline in Germany.” Journal of Interior Design, vol. 36, no. 4, Wiley-Blackwell, 2011, pp. 5–14, doi:10.1111/j.1939-1668.2011.01062.x.","havard":"U. Pottgiesser, Interior design as an academic discipline in Germany, Journal of Interior Design. 36 (2011) 5–14.","bjps":"Pottgiesser U (2011) Interior Design as an Academic Discipline in Germany. Journal of Interior Design 36, 5–14.","van":"Pottgiesser U. Interior design as an academic discipline in Germany. Journal of Interior Design. 2011;36(4):5–14.","chicago":"Pottgiesser, Uta. “Interior Design as an Academic Discipline in Germany.” Journal of Interior Design 36, no. 4 (2011): 5–14. https://doi.org/10.1111/j.1939-1668.2011.01062.x.","apa":"Pottgiesser, U. (2011). Interior design as an academic discipline in Germany. Journal of Interior Design, 36(4), 5–14. https://doi.org/10.1111/j.1939-1668.2011.01062.x"},"volume":36,"title":"Interior design as an academic discipline in Germany","page":"5-14","status":"public","quality_controlled":"1","publisher":"Wiley-Blackwell","department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"author":[{"orcid":"0000-0002-8594-3168","full_name":"Pottgiesser, Uta","first_name":"Uta","id":"27166","last_name":"Pottgiesser"}],"year":2011,"issue":"4"},{"user_id":"45673","date_updated":"2023-03-15T13:49:58Z","editor":[{"orcid":"0000-0002-8594-3168","id":"27166","last_name":"Pottgiesser","first_name":"Uta","full_name":"Pottgiesser, Uta"},{"last_name":"Parode","full_name":"Parode, Fabio","first_name":"Fabio"}],"publication_identifier":{"isbn":["978-85-61818-18-0 "]},"date_created":"2021-03-08T14:51:29Z","type":"conference_editor","place":"Porto Alegre","language":[{"iso":"eng"}],"_id":"5266","citation":{"ama":"Pottgiesser U, Parode F, eds. Recycling Design : Germany-Brazil. Porto Alegre; 2011.","ieee":"U. Pottgiesser and F. Parode, Eds., Recycling Design : Germany-Brazil. Porto Alegre, 2011.","chicago-de":"Pottgiesser, Uta und Fabio Parode, Hrsg. 2011. Recycling Design : Germany-Brazil. Porto Alegre.","din1505-2-1":"Pottgiesser, U. ; Parode, F. (Hrsg.): Recycling Design : Germany-Brazil. Porto Alegre, 2011","short":"U. Pottgiesser, F. Parode, eds., Recycling Design : Germany-Brazil, Porto Alegre, 2011.","ufg":"Pottgiesser, Uta/Parode, Fabio (Hgg.) (2011): Recycling Design : Germany-Brazil, Porto Alegre.","bjps":"Pottgiesser U and Parode F (eds) (2011) Recycling Design : Germany-Brazil. Porto Alegre.","mla":"Pottgiesser, Uta, and Fabio Parode, editors. Recycling Design : Germany-Brazil. 2011.","havard":"U. Pottgiesser, F. Parode, eds., Recycling Design : Germany-Brazil, Porto Alegre, 2011.","van":"Pottgiesser U, Parode F, editors. Recycling Design : Germany-Brazil. Porto Alegre; 2011.","chicago":"Pottgiesser, Uta, and Fabio Parode, eds. Recycling Design : Germany-Brazil. Porto Alegre, 2011.","apa":"Pottgiesser, U., & Parode, F. (Eds.). (2011). Recycling Design : Germany-Brazil. Presented at the International Scientific Conference and Exhibition, Porto Alegre."},"publication_status":"published","title":"Recycling Design : Germany-Brazil","status":"public","year":2011,"department":[{"_id":"DEP1020"},{"_id":"DEP1301"},{"_id":"DEP1055"}],"conference":{"start_date":"2011-03-14","end_date":"2011-03-16","name":" International Scientific Conference and Exhibition","location":"Porto Alegre, Brazil"}},{"date_created":"2021-03-26T13:43:54Z","type":"conference_abstract","publication":"21. Bernburger Winterseminar für Arznei- und Gewürzpflanzen Bernburg, 22./23.02.2011","date_updated":"2023-03-15T13:49:58Z","user_id":"68554","_id":"5316","language":[{"iso":"ger"}],"title":"Schonende Entkeimung von Medizinaldrogen durch das Lemgoer Verfahren (Poster)","publication_status":"published","citation":{"ama":"Dammann A, Schwarzer K, Lange H, Krüger H, Müller U. Schonende Entkeimung von Medizinaldrogen durch das Lemgoer Verfahren (Poster). In: 21. Bernburger Winterseminar für Arznei- und Gewürzpflanzen Bernburg, 22./23.02.2011. ; 2011.","ieee":"A. Dammann, K. Schwarzer, H. Lange, H. Krüger, and U. Müller, “Schonende Entkeimung von Medizinaldrogen durch das Lemgoer Verfahren (Poster),” in 21. Bernburger Winterseminar für Arznei- und Gewürzpflanzen Bernburg, 22./23.02.2011, Bernburg, 2011.","chicago-de":"Dammann, Anna, Knut Schwarzer, H. Lange, H. Krüger und Ulrich Müller. 2011. Schonende Entkeimung von Medizinaldrogen durch das Lemgoer Verfahren (Poster). In: 21. Bernburger Winterseminar für Arznei- und Gewürzpflanzen Bernburg, 22./23.02.2011.","din1505-2-1":"Dammann, Anna ; Schwarzer, Knut ; Lange, H. ; Krüger, H. ; Müller, Ulrich: Schonende Entkeimung von Medizinaldrogen durch das Lemgoer Verfahren (Poster). In: 21. Bernburger Winterseminar für Arznei- und Gewürzpflanzen Bernburg, 22./23.02.2011, 2011","short":"A. Dammann, K. Schwarzer, H. Lange, H. Krüger, U. Müller, in: 21. Bernburger Winterseminar für Arznei- und Gewürzpflanzen Bernburg, 22./23.02.2011, 2011.","mla":"Dammann, Anna, et al. “Schonende Entkeimung von Medizinaldrogen durch das Lemgoer Verfahren (Poster).” 21. Bernburger Winterseminar für Arznei- und Gewürzpflanzen Bernburg, 22./23.02.2011, 2011.","havard":"A. Dammann, K. Schwarzer, H. Lange, H. Krüger, U. Müller, Schonende Entkeimung von Medizinaldrogen durch das Lemgoer Verfahren (Poster), in: 21. Bernburger Winterseminar für Arznei- und Gewürzpflanzen Bernburg, 22./23.02.2011, 2011.","bjps":"Dammann A et al. (2011) Schonende Entkeimung von Medizinaldrogen durch das Lemgoer Verfahren (Poster). 21. Bernburger Winterseminar für Arznei- und Gewürzpflanzen Bernburg, 22./23.02.2011.","ufg":"Dammann, Anna et. al. (2011): Schonende Entkeimung von Medizinaldrogen durch das Lemgoer Verfahren (Poster), in: 21. Bernburger Winterseminar für Arznei- und Gewürzpflanzen Bernburg, 22./23.02.2011.","van":"Dammann A, Schwarzer K, Lange H, Krüger H, Müller U. Schonende Entkeimung von Medizinaldrogen durch das Lemgoer Verfahren (Poster). In: 21 Bernburger Winterseminar für Arznei- und Gewürzpflanzen Bernburg, 22/23022011. 2011.","chicago":"Dammann, Anna, Knut Schwarzer, H. Lange, H. Krüger, and Ulrich Müller. “Schonende Entkeimung von Medizinaldrogen durch das Lemgoer Verfahren (Poster).” In 21. Bernburger Winterseminar für Arznei- und Gewürzpflanzen Bernburg, 22./23.02.2011, 2011.","apa":"Dammann, A., Schwarzer, K., Lange, H., Krüger, H., & Müller, U. (2011). Schonende Entkeimung von Medizinaldrogen durch das Lemgoer Verfahren (Poster). In 21. Bernburger Winterseminar für Arznei- und Gewürzpflanzen Bernburg, 22./23.02.2011. Bernburg."},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"conference":{"location":"Bernburg","name":"21. Bernburger Winterseminar für Arznei- und Gewürzpflanzen","end_date":"2011-02-23","start_date":"2011-02-22"},"author":[{"first_name":"Anna","full_name":"Dammann, Anna","last_name":"Dammann"},{"first_name":"Knut","id":"13329","last_name":"Schwarzer","full_name":"Schwarzer, Knut"},{"last_name":"Lange","first_name":"H.","full_name":"Lange, H."},{"first_name":"H.","full_name":"Krüger, H.","last_name":"Krüger"},{"first_name":"Ulrich","last_name":"Müller","id":"12119","full_name":"Müller, Ulrich"}],"year":2011,"status":"public"},{"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"conference":{"end_date":"2011-03-04","start_date":"2011-03-03","location":"Fulda","name":"Jahrestreffen der ProcessNet-Fachausschüsse Extraktion, Fluidverfahrenstechnik, Mehrphasenströmung und Phytoextrakte – Produkte und Prozesse"},"author":[{"full_name":"Schneider, Pia","last_name":"Schneider","id":"75629","first_name":"Pia"},{"full_name":"Müller, Ulrich","id":"12119","first_name":"Ulrich","last_name":"Müller"},{"full_name":"Bart, H.-J.","first_name":"H.-J.","last_name":"Bart"},{"first_name":"K.","last_name":"Schlitter","full_name":"Schlitter, K."},{"first_name":"V.","full_name":"Jordan, V.","last_name":"Jordan"}],"year":2011,"status":"public","title":"Tensid-Wasser-Systeme als innovative Technologie zur Extraktion von Phytostoffen am Beispiel der Modellpflanze Salvia tribola","publication_status":"published","citation":{"van":"Schneider P, Müller U, Bart H-J, Schlitter K, Jordan V. Tensid-Wasser-Systeme als innovative Technologie zur Extraktion von Phytostoffen am Beispiel der Modellpflanze Salvia tribola. In: Jahrestreffen der ProcessNet-Fachausschüsse Extraktion, Fluidverfahrenstechnik, Mehrphasenströmung und Phytoextrakte – Produkte und Prozesse, Fulda, 03/04032011. 2011.","mla":"Schneider, Pia, et al. “Tensid-Wasser-Systeme als innovative Technologie zur Extraktion von Phytostoffen am Beispiel der Modellpflanze Salvia tribola.” Jahrestreffen der ProcessNet-Fachausschüsse Extraktion, Fluidverfahrenstechnik, Mehrphasenströmung und Phytoextrakte – Produkte und Prozesse, Fulda, 03./04.03.2011, 2011.","havard":"P. Schneider, U. Müller, H.-J. Bart, K. Schlitter, V. Jordan, Tensid-Wasser-Systeme als innovative Technologie zur Extraktion von Phytostoffen am Beispiel der Modellpflanze Salvia tribola, in: Jahrestreffen der ProcessNet-Fachausschüsse Extraktion, Fluidverfahrenstechnik, Mehrphasenströmung und Phytoextrakte – Produkte und Prozesse, Fulda, 03./04.03.2011, 2011.","bjps":"Schneider P et al. (2011) Tensid-Wasser-Systeme als innovative Technologie zur Extraktion von Phytostoffen am Beispiel der Modellpflanze Salvia tribola. Jahrestreffen der ProcessNet-Fachausschüsse Extraktion, Fluidverfahrenstechnik, Mehrphasenströmung und Phytoextrakte – Produkte und Prozesse, Fulda, 03./04.03.2011.","ufg":"Schneider, Pia et. al. (2011): Tensid-Wasser-Systeme als innovative Technologie zur Extraktion von Phytostoffen am Beispiel der Modellpflanze Salvia tribola, in: Jahrestreffen der ProcessNet-Fachausschüsse Extraktion, Fluidverfahrenstechnik, Mehrphasenströmung und Phytoextrakte – Produkte und Prozesse, Fulda, 03./04.03.2011.","apa":"Schneider, P., Müller, U., Bart, H.-J., Schlitter, K., & Jordan, V. (2011). Tensid-Wasser-Systeme als innovative Technologie zur Extraktion von Phytostoffen am Beispiel der Modellpflanze Salvia tribola. In Jahrestreffen der ProcessNet-Fachausschüsse Extraktion, Fluidverfahrenstechnik, Mehrphasenströmung und Phytoextrakte – Produkte und Prozesse, Fulda, 03./04.03.2011. Fulda.","chicago":"Schneider, Pia, Ulrich Müller, H.-J. Bart, K. Schlitter, and V. Jordan. “Tensid-Wasser-Systeme als innovative Technologie zur Extraktion von Phytostoffen am Beispiel der Modellpflanze Salvia tribola.” In Jahrestreffen der ProcessNet-Fachausschüsse Extraktion, Fluidverfahrenstechnik, Mehrphasenströmung und Phytoextrakte – Produkte und Prozesse, Fulda, 03./04.03.2011, 2011.","short":"P. Schneider, U. Müller, H.-J. Bart, K. Schlitter, V. Jordan, in: Jahrestreffen der ProcessNet-Fachausschüsse Extraktion, Fluidverfahrenstechnik, Mehrphasenströmung und Phytoextrakte – Produkte und Prozesse, Fulda, 03./04.03.2011, 2011.","din1505-2-1":"Schneider, Pia ; Müller, Ulrich ; Bart, H.-J. ; Schlitter, K. ; Jordan, V.: Tensid-Wasser-Systeme als innovative Technologie zur Extraktion von Phytostoffen am Beispiel der Modellpflanze Salvia tribola. In: Jahrestreffen der ProcessNet-Fachausschüsse Extraktion, Fluidverfahrenstechnik, Mehrphasenströmung und Phytoextrakte – Produkte und Prozesse, Fulda, 03./04.03.2011, 2011","chicago-de":"Schneider, Pia, Ulrich Müller, H.-J. Bart, K. Schlitter und V. Jordan. 2011. Tensid-Wasser-Systeme als innovative Technologie zur Extraktion von Phytostoffen am Beispiel der Modellpflanze Salvia tribola. In: Jahrestreffen der ProcessNet-Fachausschüsse Extraktion, Fluidverfahrenstechnik, Mehrphasenströmung und Phytoextrakte – Produkte und Prozesse, Fulda, 03./04.03.2011.","ama":"Schneider P, Müller U, Bart H-J, Schlitter K, Jordan V. Tensid-Wasser-Systeme als innovative Technologie zur Extraktion von Phytostoffen am Beispiel der Modellpflanze Salvia tribola. In: Jahrestreffen der ProcessNet-Fachausschüsse Extraktion, Fluidverfahrenstechnik, Mehrphasenströmung und Phytoextrakte – Produkte und Prozesse, Fulda, 03./04.03.2011. ; 2011.","ieee":"P. Schneider, U. Müller, H.-J. Bart, K. Schlitter, and V. Jordan, “Tensid-Wasser-Systeme als innovative Technologie zur Extraktion von Phytostoffen am Beispiel der Modellpflanze Salvia tribola,” in Jahrestreffen der ProcessNet-Fachausschüsse Extraktion, Fluidverfahrenstechnik, Mehrphasenströmung und Phytoextrakte – Produkte und Prozesse, Fulda, 03./04.03.2011, Fulda, 2011."},"_id":"5318","language":[{"iso":"ger"}],"date_created":"2021-03-26T14:02:37Z","type":"conference","publication":"Jahrestreffen der ProcessNet-Fachausschüsse Extraktion, Fluidverfahrenstechnik, Mehrphasenströmung und Phytoextrakte – Produkte und Prozesse, Fulda, 03./04.03.2011","date_updated":"2023-03-15T13:49:58Z","user_id":"74222"},{"year":2011,"author":[{"first_name":"Roland","id":"12864","last_name":"Pliske","full_name":"Pliske, Roland"},{"id":"12119","last_name":"Müller","full_name":"Müller, Ulrich","first_name":"Ulrich"},{"id":"49024","first_name":"Rainer","last_name":"Barnekow","full_name":"Barnekow, Rainer"}],"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"conference":{"start_date":"2011-03-23","end_date":"2011-03-24","location":"Vlaardingen/NL","name":"ProcessNet-Fachausschussitzung Lebensmittelverfahrenstechnik"},"status":"public","title":"Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trockengutes (Poster)","citation":{"ama":"Pliske R, Müller U, Barnekow R. Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trockengutes (Poster). In: ProcessNet-Fachausschussitzung Lebensmittelverfahrenstechnik, Vlaardingen/NL, 23./24.03.2011. ; 2011.","ieee":"R. Pliske, U. Müller, and R. Barnekow, “Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trockengutes (Poster),” in ProcessNet-Fachausschussitzung Lebensmittelverfahrenstechnik, Vlaardingen/NL, 23./24.03.2011, Vlaardingen/NL, 2011.","short":"R. Pliske, U. Müller, R. Barnekow, in: ProcessNet-Fachausschussitzung Lebensmittelverfahrenstechnik, Vlaardingen/NL, 23./24.03.2011, 2011.","din1505-2-1":"Pliske, Roland ; Müller, Ulrich ; Barnekow, Rainer: Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trockengutes (Poster). In: ProcessNet-Fachausschussitzung Lebensmittelverfahrenstechnik, Vlaardingen/NL, 23./24.03.2011, 2011","chicago-de":"Pliske, Roland, Ulrich Müller und Rainer Barnekow. 2011. Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trockengutes (Poster). In: ProcessNet-Fachausschussitzung Lebensmittelverfahrenstechnik, Vlaardingen/NL, 23./24.03.2011.","van":"Pliske R, Müller U, Barnekow R. Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trockengutes (Poster). In: ProcessNet-Fachausschussitzung Lebensmittelverfahrenstechnik, Vlaardingen/NL, 23/24032011. 2011.","mla":"Pliske, Roland, et al. “Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trockengutes (Poster).” ProcessNet-Fachausschussitzung Lebensmittelverfahrenstechnik, Vlaardingen/NL, 23./24.03.2011, 2011.","bjps":"Pliske R, Müller U and Barnekow R (2011) Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trockengutes (Poster). ProcessNet-Fachausschussitzung Lebensmittelverfahrenstechnik, Vlaardingen/NL, 23./24.03.2011.","havard":"R. Pliske, U. Müller, R. Barnekow, Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trockengutes (Poster), in: ProcessNet-Fachausschussitzung Lebensmittelverfahrenstechnik, Vlaardingen/NL, 23./24.03.2011, 2011.","ufg":"Pliske, Roland et. al. (2011): Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trockengutes (Poster), in: ProcessNet-Fachausschussitzung Lebensmittelverfahrenstechnik, Vlaardingen/NL, 23./24.03.2011.","apa":"Pliske, R., Müller, U., & Barnekow, R. (2011). Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trockengutes (Poster). In ProcessNet-Fachausschussitzung Lebensmittelverfahrenstechnik, Vlaardingen/NL, 23./24.03.2011. Vlaardingen/NL.","chicago":"Pliske, Roland, Ulrich Müller, and Rainer Barnekow. “Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trockengutes (Poster).” In ProcessNet-Fachausschussitzung Lebensmittelverfahrenstechnik, Vlaardingen/NL, 23./24.03.2011, 2011."},"publication_status":"published","language":[{"iso":"ger"}],"_id":"5319","publication":"ProcessNet-Fachausschussitzung Lebensmittelverfahrenstechnik, Vlaardingen/NL, 23./24.03.2011","type":"conference","date_created":"2021-03-26T14:07:12Z","user_id":"15514","date_updated":"2023-03-15T13:49:58Z"},{"citation":{"ama":"Broeker T, Steffens M, Schneider J. Energetic conversion of residues from food processing with a focus on bioethanol. In: 7th European Bioethanol Technology Meeting (Beitrag Zum Konferenzband), Detmold, April 2011. ; 2011.","ieee":"T. Broeker, M. Steffens, and J. Schneider, “Energetic conversion of residues from food processing with a focus on bioethanol,” presented at the 7th European Bioethanol Technology Meeting, Detmold, 2011.","short":"T. Broeker, M. Steffens, J. Schneider, in: 7th European Bioethanol Technology Meeting (Beitrag Zum Konferenzband), Detmold, April 2011, 2011.","din1505-2-1":"Broeker, Timo ; Steffens, M. ; Schneider, Jan: Energetic conversion of residues from food processing with a focus on bioethanol. In: 7th European Bioethanol Technology Meeting (Beitrag zum Konferenzband), Detmold, April 2011, 2011","chicago-de":"Broeker, Timo, M. Steffens und Jan Schneider. 2011. Energetic conversion of residues from food processing with a focus on bioethanol. In: 7th European Bioethanol Technology Meeting (Beitrag zum Konferenzband), Detmold, April 2011.","van":"Broeker T, Steffens M, Schneider J. Energetic conversion of residues from food processing with a focus on bioethanol. In: 7th European Bioethanol Technology Meeting (Beitrag zum Konferenzband), Detmold, April 2011. 2011.","ufg":"Broeker, Timo/Steffens, M./Schneider, Jan: Energetic conversion of residues from food processing with a focus on bioethanol, in: o. Hg.: 7th European Bioethanol Technology Meeting (Beitrag zum Konferenzband), Detmold, April 2011, o. O. 2011.","bjps":"Broeker T, Steffens M and Schneider J (2011) Energetic Conversion of Residues from Food Processing with a Focus on Bioethanol. 7th European Bioethanol Technology Meeting (Beitrag Zum Konferenzband), Detmold, April 2011.","havard":"T. Broeker, M. Steffens, J. Schneider, Energetic conversion of residues from food processing with a focus on bioethanol, in: 7th European Bioethanol Technology Meeting (Beitrag Zum Konferenzband), Detmold, April 2011, 2011.","mla":"Broeker, Timo, et al. “Energetic Conversion of Residues from Food Processing with a Focus on Bioethanol.” 7th European Bioethanol Technology Meeting (Beitrag Zum Konferenzband), Detmold, April 2011, 2011.","apa":"Broeker, T., Steffens, M., & Schneider, J. (2011). Energetic conversion of residues from food processing with a focus on bioethanol. 7th European Bioethanol Technology Meeting (Beitrag Zum Konferenzband), Detmold, April 2011. 7th European Bioethanol Technology Meeting, Detmold.","chicago":"Broeker, Timo, M. Steffens, and Jan Schneider. “Energetic Conversion of Residues from Food Processing with a Focus on Bioethanol.” In 7th European Bioethanol Technology Meeting (Beitrag Zum Konferenzband), Detmold, April 2011, 2011."},"publication_status":"published","title":"Energetic conversion of residues from food processing with a focus on bioethanol","status":"public","year":"2011","author":[{"first_name":"Timo","last_name":"Broeker","id":"43927","full_name":"Broeker, Timo"},{"last_name":"Steffens","full_name":"Steffens, M.","first_name":"M."},{"orcid":"0000-0001-6401-8873","last_name":"Schneider","first_name":"Jan","full_name":"Schneider, Jan","id":"13209"}],"department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"conference":{"location":"Detmold","name":"7th European Bioethanol Technology Meeting","start_date":"2011-04-","end_date":"2011-04-"},"user_id":"83779","date_updated":"2024-05-24T06:31:04Z","publication":"7th European Bioethanol Technology Meeting (Beitrag zum Konferenzband), Detmold, April 2011","date_created":"2021-03-26T14:12:22Z","type":"conference","_id":"5320","language":[{"iso":"eng"}]},{"date_created":"2021-03-26T14:18:57Z","type":"patent","date_updated":"2023-03-15T13:49:58Z","user_id":"15514","ipc":"???","ipn":" \tKZ: 10 2011 018 652.2","_id":"5321","title":"Trockengasspülung","citation":{"ama":"Müller U, Wilhelm P. Trockengasspülung. 2011.","ieee":"U. Müller and P. Wilhelm, “Trockengasspülung.” 2011.","short":"U. Müller, P. Wilhelm, (2011).","din1505-2-1":"Müller, Ulrich ; Wilhelm, Patrick: Trockengasspülung (2011)","chicago-de":"Müller, Ulrich und Patrick Wilhelm. 2011. Trockengasspülung.","van":"Müller U, Wilhelm P. Trockengasspülung. 2011.","bjps":"Müller U and Wilhelm P (2011) Trockengasspülung.","mla":"Müller, Ulrich, and Patrick Wilhelm. Trockengasspülung. 2011.","havard":"U. Müller, P. Wilhelm, Trockengasspülung, (2011).","ufg":"Müller, Ulrich/Wilhelm, Patrick (2011): Trockengasspülung.","apa":"Müller, U., & Wilhelm, P. (2011). Trockengasspülung.","chicago":"Müller, Ulrich, and Patrick Wilhelm. “Trockengasspülung,” 2011."},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"author":[{"id":"12119","last_name":"Müller","full_name":"Müller, Ulrich","first_name":"Ulrich"},{"id":"12013","last_name":"Wilhelm","full_name":"Wilhelm, Patrick","first_name":"Patrick"}],"year":2011,"publication_date":"21.04.2011","status":"public"},{"publication_status":"published","citation":{"din1505-2-1":"Mormann, S. ; Becker, Barbara: Vergleich unterschiedlicher RNA-Extraktionskits und Primer-/Sondensysteme zum Nachweis von humanem Norovirus in Lebensmitteln mittels real-time RT-PCR. In: Fachsymposium Lebensmittelmikrobiologie, Damp, 04.-06.05.2011, 2011","chicago-de":"Mormann, S. und Barbara Becker. 2011. Vergleich unterschiedlicher RNA-Extraktionskits und Primer-/Sondensysteme zum Nachweis von humanem Norovirus in Lebensmitteln mittels real-time RT-PCR. In: Fachsymposium Lebensmittelmikrobiologie, Damp, 04.-06.05.2011.","short":"S. Mormann, B. Becker, in: Fachsymposium Lebensmittelmikrobiologie, Damp, 04.-06.05.2011, 2011.","mla":"Mormann, S., and Barbara Becker. “ Vergleich unterschiedlicher RNA-Extraktionskits und Primer-/Sondensysteme zum Nachweis von humanem Norovirus in Lebensmitteln mittels real-time RT-PCR.” Fachsymposium Lebensmittelmikrobiologie, Damp, 04.-06.05.2011, 2011.","havard":"S. Mormann, B. Becker, Vergleich unterschiedlicher RNA-Extraktionskits und Primer-/Sondensysteme zum Nachweis von humanem Norovirus in Lebensmitteln mittels real-time RT-PCR, in: Fachsymposium Lebensmittelmikrobiologie, Damp, 04.-06.05.2011, 2011.","bjps":"Mormann S and Becker B (2011) Vergleich unterschiedlicher RNA-Extraktionskits und Primer-/Sondensysteme zum Nachweis von humanem Norovirus in Lebensmitteln mittels real-time RT-PCR. Fachsymposium Lebensmittelmikrobiologie, Damp, 04.-06.05.2011.","ufg":"Mormann, S./Becker, Barbara: Vergleich unterschiedlicher RNA-Extraktionskits und Primer-/Sondensysteme zum Nachweis von humanem Norovirus in Lebensmitteln mittels real-time RT-PCR, in: o. Hg.: Fachsymposium Lebensmittelmikrobiologie, Damp, 04.-06.05.2011, o. O. 2011.","ama":"Mormann S, Becker B. Vergleich unterschiedlicher RNA-Extraktionskits und Primer-/Sondensysteme zum Nachweis von humanem Norovirus in Lebensmitteln mittels real-time RT-PCR. In: Fachsymposium Lebensmittelmikrobiologie, Damp, 04.-06.05.2011. ; 2011.","van":"Mormann S, Becker B. Vergleich unterschiedlicher RNA-Extraktionskits und Primer-/Sondensysteme zum Nachweis von humanem Norovirus in Lebensmitteln mittels real-time RT-PCR. In: Fachsymposium Lebensmittelmikrobiologie, Damp, 04-06052011. 2011.","chicago":"Mormann, S., and Barbara Becker. “ Vergleich unterschiedlicher RNA-Extraktionskits und Primer-/Sondensysteme zum Nachweis von humanem Norovirus in Lebensmitteln mittels real-time RT-PCR.” In Fachsymposium Lebensmittelmikrobiologie, Damp, 04.-06.05.2011, 2011.","ieee":"S. Mormann and B. Becker, “ Vergleich unterschiedlicher RNA-Extraktionskits und Primer-/Sondensysteme zum Nachweis von humanem Norovirus in Lebensmitteln mittels real-time RT-PCR,” presented at the Fachsymposium Lebensmittelmikrobiologie, Damp, 2011.","apa":"Mormann, S., & Becker, B. (2011). Vergleich unterschiedlicher RNA-Extraktionskits und Primer-/Sondensysteme zum Nachweis von humanem Norovirus in Lebensmitteln mittels real-time RT-PCR. Fachsymposium Lebensmittelmikrobiologie, Damp, 04.-06.05.2011. Fachsymposium Lebensmittelmikrobiologie, Damp."},"title":" \tVergleich unterschiedlicher RNA-Extraktionskits und Primer-/Sondensysteme zum Nachweis von humanem Norovirus in Lebensmitteln mittels real-time RT-PCR","status":"public","conference":{"location":"Damp","name":"Fachsymposium Lebensmittelmikrobiologie","end_date":"2011-05-06","start_date":"2011-05-04"},"department":[{"_id":"DEP4023"},{"_id":"DEP4026"}],"year":"2011","author":[{"first_name":"S.","full_name":"Mormann, S.","last_name":"Mormann"},{"id":"12640","last_name":"Becker","full_name":"Becker, Barbara","first_name":"Barbara"}],"date_updated":"2024-04-29T10:16:50Z","user_id":"83778","date_created":"2021-03-26T14:22:22Z","type":"conference","publication":"Fachsymposium Lebensmittelmikrobiologie, Damp, 04.-06.05.2011","language":[{"iso":"ger"}],"_id":"5322"},{"title":"Validierungsstudie eines kulturellen, mikrobiologischen Nachweissystems mit ausgewählten Rohstoffen (Poster)","publication_status":"published","citation":{"short":"J. Pfannebecker, B. Becker, in: Fachsymposium Lebensmittelmikrobiologie, Damp (2011), 2011.","din1505-2-1":"Pfannebecker, Jens ; Becker, Barbara: Validierungsstudie eines kulturellen, mikrobiologischen Nachweissystems mit ausgewählten Rohstoffen (Poster). In: Fachsymposium Lebensmittelmikrobiologie, Damp (2011), 2011","chicago-de":"Pfannebecker, Jens und Barbara Becker. 2011. Validierungsstudie eines kulturellen, mikrobiologischen Nachweissystems mit ausgewählten Rohstoffen (Poster). In: Fachsymposium Lebensmittelmikrobiologie, Damp (2011).","ieee":"J. Pfannebecker and B. Becker, “Validierungsstudie eines kulturellen, mikrobiologischen Nachweissystems mit ausgewählten Rohstoffen (Poster),” presented at the Fachsymposium Lebensmittelmikrobiologie, Damp, 2011.","apa":"Pfannebecker, J., & Becker, B. (2011). Validierungsstudie eines kulturellen, mikrobiologischen Nachweissystems mit ausgewählten Rohstoffen (Poster). Fachsymposium Lebensmittelmikrobiologie, Damp (2011). Fachsymposium Lebensmittelmikrobiologie, Damp.","chicago":"Pfannebecker, Jens, and Barbara Becker. “Validierungsstudie eines kulturellen, mikrobiologischen Nachweissystems mit ausgewählten Rohstoffen (Poster).” In Fachsymposium Lebensmittelmikrobiologie, Damp (2011), 2011.","ama":"Pfannebecker J, Becker B. Validierungsstudie eines kulturellen, mikrobiologischen Nachweissystems mit ausgewählten Rohstoffen (Poster). In: Fachsymposium Lebensmittelmikrobiologie, Damp (2011). ; 2011.","van":"Pfannebecker J, Becker B. Validierungsstudie eines kulturellen, mikrobiologischen Nachweissystems mit ausgewählten Rohstoffen (Poster). In: Fachsymposium Lebensmittelmikrobiologie, Damp (2011). 2011.","havard":"J. Pfannebecker, B. Becker, Validierungsstudie eines kulturellen, mikrobiologischen Nachweissystems mit ausgewählten Rohstoffen (Poster), in: Fachsymposium Lebensmittelmikrobiologie, Damp (2011), 2011.","bjps":"Pfannebecker J and Becker B (2011) Validierungsstudie eines kulturellen, mikrobiologischen Nachweissystems mit ausgewählten Rohstoffen (Poster). Fachsymposium Lebensmittelmikrobiologie, Damp (2011).","mla":"Pfannebecker, Jens, and Barbara Becker. “Validierungsstudie eines kulturellen, mikrobiologischen Nachweissystems mit ausgewählten Rohstoffen (Poster).” Fachsymposium Lebensmittelmikrobiologie, Damp (2011), 2011.","ufg":"Pfannebecker, Jens/Becker, Barbara: Validierungsstudie eines kulturellen, mikrobiologischen Nachweissystems mit ausgewählten Rohstoffen (Poster), in: o. Hg.: Fachsymposium Lebensmittelmikrobiologie, Damp (2011), o. O. 2011."},"conference":{"start_date":"2011-05-04","end_date":"2011-05-06","name":"Fachsymposium Lebensmittelmikrobiologie","location":"Damp"},"department":[{"_id":"DEP4023"},{"_id":"DEP4026"}],"year":"2011","author":[{"full_name":"Pfannebecker, Jens","first_name":"Jens","last_name":"Pfannebecker","id":"45690"},{"last_name":"Becker","full_name":"Becker, Barbara","id":"12640","first_name":"Barbara"}],"status":"public","type":"conference_abstract","date_created":"2021-03-26T14:32:31Z","publication":" \tFachsymposium Lebensmittelmikrobiologie, Damp (2011)","date_updated":"2024-04-29T10:17:06Z","user_id":"83778","_id":"5324","language":[{"iso":"ger"}]},{"_id":"5325","language":[{"iso":"eng"}],"publication":"Brewing and beverage industry. China ","publication_identifier":{"issn":["1435-358X "]},"type":"journal_article","date_created":"2020-09-02T09:01:39Z","user_id":"83779","date_updated":"2024-05-24T06:31:33Z","issue":"1","year":"2011","author":[{"orcid":"0000-0001-6401-8873","last_name":"Schneider","id":"13209","full_name":"Schneider, Jan","first_name":"Jan"},{"first_name":"Marco","full_name":"Steffens, Marco","last_name":"Steffens"},{"full_name":"Berlenkamp, Uwe","last_name":"Berlenkamp","first_name":"Uwe"},{"last_name":"Schlimme","full_name":"Schlimme, Karin","first_name":"Karin"}],"department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"publisher":"Sachon","status":"public","page":"31-37","title":"Application of novel iron compounds in beverages ","citation":{"chicago-de":"Schneider, Jan, Marco Steffens, Uwe Berlenkamp und Karin Schlimme. 2011. Application of novel iron compounds in beverages . Brewing and beverage industry. China , Nr. 1: 31–37.","din1505-2-1":"Schneider, Jan ; Steffens, Marco ; Berlenkamp, Uwe ; Schlimme, Karin: Application of novel iron compounds in beverages . In: Brewing and beverage industry. China , Sachon (2011), Nr. 1, S. 31–37","short":"J. Schneider, M. Steffens, U. Berlenkamp, K. Schlimme, Brewing and Beverage Industry. China (2011) 31–37.","ufg":"Schneider, Jan u. a.: Application of novel iron compounds in beverages , in: Brewing and beverage industry. China (2011), H. 1, S. 31–37.","havard":"J. Schneider, M. Steffens, U. Berlenkamp, K. Schlimme, Application of novel iron compounds in beverages , Brewing and Beverage Industry. China . (2011) 31–37.","mla":"Schneider, Jan, et al. “Application of Novel Iron Compounds in Beverages .” Brewing and Beverage Industry. China , no. 1, 2011, pp. 31–37.","bjps":"Schneider J et al. (2011) Application of Novel Iron Compounds in Beverages . Brewing and beverage industry. China 31–37.","van":"Schneider J, Steffens M, Berlenkamp U, Schlimme K. Application of novel iron compounds in beverages . Brewing and beverage industry China . 2011;(1):31–7.","ama":"Schneider J, Steffens M, Berlenkamp U, Schlimme K. Application of novel iron compounds in beverages . Brewing and beverage industry China . 2011;(1):31-37.","chicago":"Schneider, Jan, Marco Steffens, Uwe Berlenkamp, and Karin Schlimme. “Application of Novel Iron Compounds in Beverages .” Brewing and Beverage Industry. China , no. 1 (2011): 31–37.","apa":"Schneider, J., Steffens, M., Berlenkamp, U., & Schlimme, K. (2011). Application of novel iron compounds in beverages . Brewing and Beverage Industry. China , 1, 31–37.","ieee":"J. Schneider, M. Steffens, U. Berlenkamp, and K. Schlimme, “Application of novel iron compounds in beverages ,” Brewing and beverage industry. China , no. 1, pp. 31–37, 2011."},"publication_status":"published"},{"_id":"5326","language":[{"iso":"ger"}],"place":"Frankfurt, M.","type":"journal_article","date_created":"2021-03-26T14:45:25Z","publication":"Fleischwirtschaft","publication_identifier":{"issn":["0015-363X"]},"intvolume":" 91","date_updated":"2023-03-15T13:49:58Z","user_id":"79260","issue":"9","department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"author":[{"full_name":"Stiebing, Achim","id":"12235","last_name":"Stiebing","first_name":"Achim"},{"first_name":"Heinrich","full_name":"Thumel, Heinrich","id":"12070","last_name":"Thumel"}],"year":2011,"publisher":"Dt. Fachverl. ","page":"86-91","status":"public","title":"Prämierungen belegen hohes Niveau – DLG-Qualitätsprüfungen 2010 und 2011 – Rohwürste und Rohpökelwaren","publication_status":"published","volume":91,"citation":{"short":"A. Stiebing, H. Thumel, Fleischwirtschaft 91 (2011) 86–91.","din1505-2-1":"Stiebing, Achim ; Thumel, Heinrich: Prämierungen belegen hohes Niveau – DLG-Qualitätsprüfungen 2010 und 2011 – Rohwürste und Rohpökelwaren. In: Fleischwirtschaft Bd. 91. Frankfurt, M., Dt. Fachverl. (2011), Nr. 9, S. 86–91","chicago-de":"Stiebing, Achim und Heinrich Thumel. 2011. Prämierungen belegen hohes Niveau – DLG-Qualitätsprüfungen 2010 und 2011 – Rohwürste und Rohpökelwaren. Fleischwirtschaft 91, Nr. 9: 86–91.","van":"Stiebing A, Thumel H. Prämierungen belegen hohes Niveau – DLG-Qualitätsprüfungen 2010 und 2011 – Rohwürste und Rohpökelwaren. Fleischwirtschaft. 2011;91(9):86–91.","ufg":"Stiebing, Achim/Thumel, Heinrich (2011): Prämierungen belegen hohes Niveau – DLG-Qualitätsprüfungen 2010 und 2011 – Rohwürste und Rohpökelwaren, in: Fleischwirtschaft 91 (9), S. 86–91.","mla":"Stiebing, Achim, and Heinrich Thumel. “Prämierungen belegen hohes Niveau – DLG-Qualitätsprüfungen 2010 und 2011 – Rohwürste und Rohpökelwaren.” Fleischwirtschaft, vol. 91, no. 9, Dt. Fachverl. , 2011, pp. 86–91.","havard":"A. Stiebing, H. Thumel, Prämierungen belegen hohes Niveau – DLG-Qualitätsprüfungen 2010 und 2011 – Rohwürste und Rohpökelwaren, Fleischwirtschaft. 91 (2011) 86–91.","bjps":"Stiebing A and Thumel H (2011) Prämierungen belegen hohes Niveau – DLG-Qualitätsprüfungen 2010 und 2011 – Rohwürste und Rohpökelwaren. Fleischwirtschaft 91, 86–91.","apa":"Stiebing, A., & Thumel, H. (2011). Prämierungen belegen hohes Niveau – DLG-Qualitätsprüfungen 2010 und 2011 – Rohwürste und Rohpökelwaren. Fleischwirtschaft, 91(9), 86–91.","chicago":"Stiebing, Achim, and Heinrich Thumel. “Prämierungen belegen hohes Niveau – DLG-Qualitätsprüfungen 2010 und 2011 – Rohwürste und Rohpökelwaren.” Fleischwirtschaft 91, no. 9 (2011): 86–91.","ama":"Stiebing A, Thumel H. Prämierungen belegen hohes Niveau – DLG-Qualitätsprüfungen 2010 und 2011 – Rohwürste und Rohpökelwaren. Fleischwirtschaft. 2011;91(9):86-91.","ieee":"A. Stiebing and H. Thumel, “Prämierungen belegen hohes Niveau – DLG-Qualitätsprüfungen 2010 und 2011 – Rohwürste und Rohpökelwaren,” Fleischwirtschaft, vol. 91, no. 9, pp. 86–91, 2011."}},{"title":" \tKennzeichnung nicht zwingend erforderlich – Einfluss von Transglutaminase auf den Zusammenhalt von Rohschinken mit unterschiedlichem Salzgehalt","citation":{"short":"A. Stiebing, B. Schmidt, Fleischwirtschaft 91 (2011) 44–46.","din1505-2-1":"Stiebing, Achim ; Schmidt, Bastian: Kennzeichnung nicht zwingend erforderlich – Einfluss von Transglutaminase auf den Zusammenhalt von Rohschinken mit unterschiedlichem Salzgehalt. In: Fleischwirtschaft Bd. 91. Frankfurt, M., Dt. Fachverl. (2011), Nr. 11, S. 44–46","chicago-de":"Stiebing, Achim und Bastian Schmidt. 2011. Kennzeichnung nicht zwingend erforderlich – Einfluss von Transglutaminase auf den Zusammenhalt von Rohschinken mit unterschiedlichem Salzgehalt. Fleischwirtschaft 91, Nr. 11: 44–46.","van":"Stiebing A, Schmidt B. Kennzeichnung nicht zwingend erforderlich – Einfluss von Transglutaminase auf den Zusammenhalt von Rohschinken mit unterschiedlichem Salzgehalt. Fleischwirtschaft. 2011;91(11):44–6.","ufg":"Stiebing, Achim/Schmidt, Bastian (2011): Kennzeichnung nicht zwingend erforderlich – Einfluss von Transglutaminase auf den Zusammenhalt von Rohschinken mit unterschiedlichem Salzgehalt, in: Fleischwirtschaft 91 (11), S. 44–46.","havard":"A. Stiebing, B. Schmidt, Kennzeichnung nicht zwingend erforderlich – Einfluss von Transglutaminase auf den Zusammenhalt von Rohschinken mit unterschiedlichem Salzgehalt, Fleischwirtschaft. 91 (2011) 44–46.","bjps":"Stiebing A and Schmidt B (2011) Kennzeichnung nicht zwingend erforderlich – Einfluss von Transglutaminase auf den Zusammenhalt von Rohschinken mit unterschiedlichem Salzgehalt. Fleischwirtschaft 91, 44–46.","mla":"Stiebing, Achim, and Bastian Schmidt. “ Kennzeichnung nicht zwingend erforderlich – Einfluss von Transglutaminase auf den Zusammenhalt von Rohschinken mit unterschiedlichem Salzgehalt.” Fleischwirtschaft, vol. 91, no. 11, Dt. Fachverl., 2011, pp. 44–46.","apa":"Stiebing, A., & Schmidt, B. (2011). Kennzeichnung nicht zwingend erforderlich – Einfluss von Transglutaminase auf den Zusammenhalt von Rohschinken mit unterschiedlichem Salzgehalt. Fleischwirtschaft, 91(11), 44–46.","chicago":"Stiebing, Achim, and Bastian Schmidt. “ Kennzeichnung nicht zwingend erforderlich – Einfluss von Transglutaminase auf den Zusammenhalt von Rohschinken mit unterschiedlichem Salzgehalt.” Fleischwirtschaft 91, no. 11 (2011): 44–46.","ama":"Stiebing A, Schmidt B. Kennzeichnung nicht zwingend erforderlich – Einfluss von Transglutaminase auf den Zusammenhalt von Rohschinken mit unterschiedlichem Salzgehalt. Fleischwirtschaft. 2011;91(11):44-46.","ieee":"A. Stiebing and B. Schmidt, “ Kennzeichnung nicht zwingend erforderlich – Einfluss von Transglutaminase auf den Zusammenhalt von Rohschinken mit unterschiedlichem Salzgehalt,” Fleischwirtschaft, vol. 91, no. 11, pp. 44–46, 2011."},"volume":91,"publication_status":"published","year":2011,"author":[{"first_name":"Achim","full_name":"Stiebing, Achim","id":"12235","last_name":"Stiebing"},{"full_name":"Schmidt, Bastian","first_name":"Bastian","last_name":"Schmidt","id":"69980"}],"department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"issue":"11","status":"public","page":"44-46","publisher":"Dt. Fachverl.","publication":"Fleischwirtschaft","publication_identifier":{"issn":["0015-363X"]},"date_created":"2021-03-26T14:47:44Z","type":"journal_article","user_id":"79260","date_updated":"2023-03-15T13:49:58Z","intvolume":" 91","place":"Frankfurt, M.","language":[{"iso":"ger"}],"_id":"5327"},{"issue":"1","department":[{"_id":"DEP4023"},{"_id":"DEP4026"}],"author":[{"last_name":"Becker","first_name":"Barbara","id":"12640","full_name":"Becker, Barbara"}],"year":"2011","main_file_link":[{"url":" https://www.wiso-net.de/document/FLW__6676d3c00a39c4db80786c5ae6343bfc4050a1b9","open_access":"1"}],"publisher":"Dt. Fachverl.","page":"41-43","status":"public","title":"Mikrobiologische Richt- und Warnwerte : Über die Arbeit der Fachgruppe Lebensmittelmikrobiologie und -hygiene der DGHM und die Ermittlung von Richt- und Warnwerten","publication_status":"published","volume":91,"citation":{"ama":"Becker B. Mikrobiologische Richt- und Warnwerte : Über die Arbeit der Fachgruppe Lebensmittelmikrobiologie und -hygiene der DGHM und die Ermittlung von Richt- und Warnwerten. Fleischwirtschaft. 2011;91(1):41-43.","ieee":"B. Becker, “Mikrobiologische Richt- und Warnwerte : Über die Arbeit der Fachgruppe Lebensmittelmikrobiologie und -hygiene der DGHM und die Ermittlung von Richt- und Warnwerten,” Fleischwirtschaft, vol. 91, no. 1, pp. 41–43, 2011.","van":"Becker B. Mikrobiologische Richt- und Warnwerte : Über die Arbeit der Fachgruppe Lebensmittelmikrobiologie und -hygiene der DGHM und die Ermittlung von Richt- und Warnwerten. Fleischwirtschaft. 2011;91(1):41–3.","ufg":"Becker, Barbara: Mikrobiologische Richt- und Warnwerte : Über die Arbeit der Fachgruppe Lebensmittelmikrobiologie und -hygiene der DGHM und die Ermittlung von Richt- und Warnwerten, in: Fleischwirtschaft 91 (2011), H. 1, S. 41–43.","havard":"B. Becker, Mikrobiologische Richt- und Warnwerte : Über die Arbeit der Fachgruppe Lebensmittelmikrobiologie und -hygiene der DGHM und die Ermittlung von Richt- und Warnwerten, Fleischwirtschaft. 91 (2011) 41–43.","mla":"Becker, Barbara. “Mikrobiologische Richt- und Warnwerte : Über die Arbeit der Fachgruppe Lebensmittelmikrobiologie und -hygiene der DGHM und die Ermittlung von Richt- und Warnwerten.” Fleischwirtschaft, vol. 91, no. 1, 2011, pp. 41–43.","bjps":"Becker B (2011) Mikrobiologische Richt- und Warnwerte : Über die Arbeit der Fachgruppe Lebensmittelmikrobiologie und -hygiene der DGHM und die Ermittlung von Richt- und Warnwerten. Fleischwirtschaft 91, 41–43.","apa":"Becker, B. (2011). Mikrobiologische Richt- und Warnwerte : Über die Arbeit der Fachgruppe Lebensmittelmikrobiologie und -hygiene der DGHM und die Ermittlung von Richt- und Warnwerten. Fleischwirtschaft, 91(1), 41–43.","chicago":"Becker, Barbara. “Mikrobiologische Richt- und Warnwerte : Über die Arbeit der Fachgruppe Lebensmittelmikrobiologie und -hygiene der DGHM und die Ermittlung von Richt- und Warnwerten.” Fleischwirtschaft 91, no. 1 (2011): 41–43.","short":"B. Becker, Fleischwirtschaft 91 (2011) 41–43.","chicago-de":"Becker, Barbara. 2011. Mikrobiologische Richt- und Warnwerte : Über die Arbeit der Fachgruppe Lebensmittelmikrobiologie und -hygiene der DGHM und die Ermittlung von Richt- und Warnwerten. Fleischwirtschaft 91, Nr. 1: 41–43.","din1505-2-1":"Becker, Barbara: Mikrobiologische Richt- und Warnwerte : Über die Arbeit der Fachgruppe Lebensmittelmikrobiologie und -hygiene der DGHM und die Ermittlung von Richt- und Warnwerten. In: Fleischwirtschaft Bd. 91, Dt. Fachverl. (2011), Nr. 1, S. 41–43"},"oa":"1","_id":"5328","language":[{"iso":"ger"}],"date_created":"2021-03-26T14:50:15Z","type":"journal_article","publication":"Fleischwirtschaft","publication_identifier":{"issn":["0015-363X"]},"intvolume":" 91","date_updated":"2024-05-21T07:17:13Z","user_id":"83781"},{"publication_status":"published","issue":"8","department":[{"_id":"DEP4023"},{"_id":"DEP4026"}],"publisher":"Dt. Fachverl.","type":"journal_article","intvolume":" 91","user_id":"83781","_id":"5329","title":"Erstmals Essig in der Prüfung","volume":91,"citation":{"ieee":"B. Becker, “Erstmals Essig in der Prüfung,” Fleischwirtschaft, vol. 91, no. 8, pp. 69–70, 2011.","ama":"Becker B. Erstmals Essig in der Prüfung. Fleischwirtschaft. 2011;91(8):69-70.","apa":"Becker, B. (2011). Erstmals Essig in der Prüfung. Fleischwirtschaft, 91(8), 69–70.","chicago":"Becker, Barbara. “Erstmals Essig in der Prüfung.” Fleischwirtschaft 91, no. 8 (2011): 69–70.","van":"Becker B. Erstmals Essig in der Prüfung. Fleischwirtschaft. 2011;91(8):69–70.","bjps":"Becker B (2011) Erstmals Essig in der Prüfung. Fleischwirtschaft 91, 69–70.","mla":"Becker, Barbara. “Erstmals Essig in der Prüfung.” Fleischwirtschaft, vol. 91, no. 8, 2011, pp. 69–70.","havard":"B. Becker, Erstmals Essig in der Prüfung, Fleischwirtschaft. 91 (2011) 69–70.","ufg":"Becker, Barbara: Erstmals Essig in der Prüfung, in: Fleischwirtschaft 91 (2011), H. 8, S. 69–70.","short":"B. Becker, Fleischwirtschaft 91 (2011) 69–70.","chicago-de":"Becker, Barbara. 2011. Erstmals Essig in der Prüfung. Fleischwirtschaft 91, Nr. 8: 69–70.","din1505-2-1":"Becker, Barbara: Erstmals Essig in der Prüfung. In: Fleischwirtschaft Bd. 91, Dt. Fachverl. (2011), Nr. 8, S. 69–70"},"year":"2011","author":[{"full_name":"Becker, Barbara","first_name":"Barbara","id":"12640","last_name":"Becker"}],"main_file_link":[{"open_access":"1","url":" https://www.wiso-net.de/document/FLW__b4aa1acc3a227912b27e5e91dec4d7e8db8a7a16"}],"status":"public","page":"69-70","publication":"Fleischwirtschaft","publication_identifier":{"issn":["0015-363X"]},"date_created":"2021-03-26T14:52:13Z","date_updated":"2024-05-21T07:15:11Z","oa":"1","language":[{"iso":"ger"}]},{"intvolume":" 65","user_id":"83781","date_updated":"2024-05-21T07:11:42Z","publication_identifier":{"issn":["0937-1478 "],"eissn":["1521-3811"]},"publication":"Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker ","type":"journal_article","date_created":"2021-03-26T14:59:35Z","_id":"5331","doi":"https://doi.org/10.1002/lemi.201290041","language":[{"iso":"ger"}],"volume":65,"citation":{"ieee":"J. Zapp, “Wiederholbarkeit der Mehrdimensionalen Chromatographie bei der Bestimmung von Kaffee-Aroma,” Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker , vol. 65, no. 2, pp. 33–34, 2011, doi: https://doi.org/10.1002/lemi.201290041.","ama":"Zapp J. Wiederholbarkeit der Mehrdimensionalen Chromatographie bei der Bestimmung von Kaffee-Aroma. Lebensmittelchemie : Zeitschrift d Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker . 2011;65(2):33-34. doi:https://doi.org/10.1002/lemi.201290041","chicago":"Zapp, Jürgen. “Wiederholbarkeit der Mehrdimensionalen Chromatographie bei der Bestimmung von Kaffee-Aroma.” Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker 65, no. 2 (2011): 33–34. https://doi.org/10.1002/lemi.201290041.","apa":"Zapp, J. (2011). Wiederholbarkeit der Mehrdimensionalen Chromatographie bei der Bestimmung von Kaffee-Aroma. Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker , 65(2), 33–34. https://doi.org/10.1002/lemi.201290041","ufg":"Zapp, Jürgen: Wiederholbarkeit der Mehrdimensionalen Chromatographie bei der Bestimmung von Kaffee-Aroma, in: Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker 65 (2011), H. 2, S. 33–34.","bjps":"Zapp J (2011) Wiederholbarkeit der Mehrdimensionalen Chromatographie bei der Bestimmung von Kaffee-Aroma. Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker 65, 33–34.","havard":"J. Zapp, Wiederholbarkeit der Mehrdimensionalen Chromatographie bei der Bestimmung von Kaffee-Aroma, Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker . 65 (2011) 33–34.","mla":"Zapp, Jürgen. “Wiederholbarkeit der Mehrdimensionalen Chromatographie bei der Bestimmung von Kaffee-Aroma.” Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker , vol. 65, no. 2, 2011, pp. 33–34, https://doi.org/10.1002/lemi.201290041.","van":"Zapp J. Wiederholbarkeit der Mehrdimensionalen Chromatographie bei der Bestimmung von Kaffee-Aroma. Lebensmittelchemie : Zeitschrift d Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker . 2011;65(2):33–4.","din1505-2-1":"Zapp, Jürgen: Wiederholbarkeit der Mehrdimensionalen Chromatographie bei der Bestimmung von Kaffee-Aroma. In: Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker Bd. 65, Wiley-VCH (2011), Nr. 2, S. 33–34","chicago-de":"Zapp, Jürgen. 2011. Wiederholbarkeit der Mehrdimensionalen Chromatographie bei der Bestimmung von Kaffee-Aroma. Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker 65, Nr. 2: 33–34. doi:https://doi.org/10.1002/lemi.201290041, .","short":"J. Zapp, Lebensmittelchemie : Zeitschrift d. Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker 65 (2011) 33–34."},"publication_status":"published","title":"Wiederholbarkeit der Mehrdimensionalen Chromatographie bei der Bestimmung von Kaffee-Aroma","publisher":"Wiley-VCH ","status":"public","page":"33-34","issue":"2","author":[{"full_name":"Zapp, Jürgen","last_name":"Zapp","id":"12568","first_name":"Jürgen"}],"year":"2011","department":[{"_id":"DEP4023"},{"_id":"DEP4026"}]},{"_id":"5334","language":[{"iso":"ger"}],"type":"conference_abstract","date_created":"2021-03-29T06:33:59Z","user_id":"45673","date_updated":"2023-03-15T13:49:58Z","author":[{"id":"12864","last_name":"Pliske","full_name":"Pliske, Roland","first_name":"Roland"},{"first_name":"Ulrich","last_name":"Müller","id":"12119","full_name":"Müller, Ulrich"},{"full_name":"Barnekow, Rainer","first_name":"Rainer","last_name":"Barnekow","id":"49024"}],"year":2011,"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"conference":{"location":"Vlaardingen / NL","name":"ProcessNet-Fachausschussitzung Lebensmittelverfahrenstechnik (Poster)","end_date":"2011-03-24","start_date":"2011-03-24"},"status":"public","title":"Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trockengutes","citation":{"ieee":"R. Pliske, U. Müller, and R. Barnekow, “Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trockengutes,” presented at the ProcessNet-Fachausschussitzung Lebensmittelverfahrenstechnik (Poster), Vlaardingen / NL, 2011.","ama":"Pliske R, Müller U, Barnekow R. Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trockengutes. In: ; 2011.","apa":"Pliske, R., Müller, U., & Barnekow, R. (2011). Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trockengutes. Presented at the ProcessNet-Fachausschussitzung Lebensmittelverfahrenstechnik (Poster), Vlaardingen / NL.","chicago":"Pliske, Roland, Ulrich Müller, and Rainer Barnekow. “Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trockengutes,” 2011.","van":"Pliske R, Müller U, Barnekow R. Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trockengutes. In 2011.","mla":"Pliske, Roland, et al. Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trockengutes. 2011.","bjps":"Pliske R, Müller U and Barnekow R (2011) Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trockengutes.","havard":"R. Pliske, U. Müller, R. Barnekow, Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trockengutes, in: 2011.","ufg":"Pliske, Roland et. al. (2011): Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trockengutes, in: .","short":"R. Pliske, U. Müller, R. Barnekow, in: 2011.","chicago-de":"Pliske, Roland, Ulrich Müller und Rainer Barnekow. 2011. Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trockengutes. In: .","din1505-2-1":"Pliske, Roland ; Müller, Ulrich ; Barnekow, Rainer: Untersuchung zur Steigerung der Geschwindigkeit der Gefriertrocknung durch Bewegung des Trockengutes. In: , 2011"}},{"_id":"5335","language":[{"iso":"eng"}],"date_created":"2021-03-29T06:42:43Z","type":"conference","date_updated":"2024-05-24T06:36:55Z","user_id":"83779","conference":{"end_date":"2011-01-04","start_date":"2011-01-04","location":"Detmold","name":"7th European Bioethanol Technology Meeting (Beitrag zum Konferenzband)"},"department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"year":"2011","author":[{"full_name":"Broeker, Timo","id":"43927","last_name":"Broeker","first_name":"Timo"},{"full_name":"Steffens, M.","first_name":"M.","last_name":"Steffens"},{"last_name":"Schneider","first_name":"Jan","full_name":"Schneider, Jan","id":"13209","orcid":"0000-0001-6401-8873"}],"status":"public","title":"Energetic conversion of residues from food processing with a focus on bioethanol","citation":{"apa":"Broeker, T., Steffens, M., & Schneider, J. (2011). Energetic conversion of residues from food processing with a focus on bioethanol. 7th European Bioethanol Technology Meeting (Beitrag zum Konferenzband), Detmold.","chicago":"Broeker, Timo, M. Steffens, and Jan Schneider. “Energetic Conversion of Residues from Food Processing with a Focus on Bioethanol,” 2011.","van":"Broeker T, Steffens M, Schneider J. Energetic conversion of residues from food processing with a focus on bioethanol. In 2011.","ufg":"Broeker, Timo/Steffens, M./Schneider, Jan: Energetic conversion of residues from food processing with a focus on bioethanol, in: o. Hg.: o. O. 2011.","mla":"Broeker, Timo, et al. Energetic Conversion of Residues from Food Processing with a Focus on Bioethanol. 2011.","bjps":"Broeker T, Steffens M and Schneider J (2011) Energetic Conversion of Residues from Food Processing with a Focus on Bioethanol.","havard":"T. Broeker, M. Steffens, J. Schneider, Energetic conversion of residues from food processing with a focus on bioethanol, in: 2011.","short":"T. Broeker, M. Steffens, J. Schneider, in: 2011.","din1505-2-1":"Broeker, Timo ; Steffens, M. ; Schneider, Jan: Energetic conversion of residues from food processing with a focus on bioethanol. In: , 2011","chicago-de":"Broeker, Timo, M. Steffens und Jan Schneider. 2011. Energetic conversion of residues from food processing with a focus on bioethanol. In: .","ieee":"T. Broeker, M. Steffens, and J. Schneider, “Energetic conversion of residues from food processing with a focus on bioethanol,” presented at the 7th European Bioethanol Technology Meeting (Beitrag zum Konferenzband), Detmold, 2011.","ama":"Broeker T, Steffens M, Schneider J. Energetic conversion of residues from food processing with a focus on bioethanol. In: ; 2011."}},{"ipn":"10 2011 018 652.2","ipc":"?","_id":"5337","date_created":"2021-03-29T08:32:07Z","type":"patent","user_id":"74222","date_updated":"2023-03-15T13:49:58Z","author":[{"full_name":"Müller, Ulrich","last_name":"Müller","id":"12119","first_name":"Ulrich"},{"full_name":"Wilhelm, Patrick","id":"12013","last_name":"Wilhelm","first_name":"Patrick"}],"year":2011,"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"application_date":"2011-04-21","status":"public","publication_date":"2011-04-21","title":"Trockengasspülung","citation":{"ama":"Müller U, Wilhelm P. Trockengasspülung. 2011.","ieee":"U. Müller and P. Wilhelm, “Trockengasspülung.” 2011.","short":"U. Müller, P. Wilhelm, (2011).","din1505-2-1":"Müller, Ulrich ; Wilhelm, Patrick: Trockengasspülung (2011)","chicago-de":"Müller, Ulrich und Patrick Wilhelm. 2011. Trockengasspülung.","van":"Müller U, Wilhelm P. Trockengasspülung. 2011.","mla":"Müller, Ulrich, and Patrick Wilhelm. Trockengasspülung. 2011.","havard":"U. Müller, P. Wilhelm, Trockengasspülung, (2011).","bjps":"Müller U and Wilhelm P (2011) Trockengasspülung.","ufg":"Müller, Ulrich/Wilhelm, Patrick (2011): Trockengasspülung.","apa":"Müller, U., & Wilhelm, P. (2011). Trockengasspülung.","chicago":"Müller, Ulrich, and Patrick Wilhelm. “Trockengasspülung,” 2011."}},{"language":[{"iso":"eng"}],"_id":"5338","date_updated":"2024-04-29T10:30:11Z","user_id":"83778","type":"conference","date_created":"2021-03-29T08:39:11Z","status":"public","conference":{"start_date":"2011-05-04","end_date":"2011-05-06","name":"Fachsymposium Lebensmittelmikrobiologie","location":"Damp "},"department":[{"_id":"DEP4023"},{"_id":"DEP4026"}],"author":[{"full_name":"Mormann, S.","first_name":"S.","last_name":"Mormann"},{"id":"12640","first_name":"Barbara","full_name":"Becker, Barbara","last_name":"Becker"}],"year":"2011","citation":{"short":"S. Mormann, B. Becker, in: 2011.","chicago-de":"Mormann, S. und Barbara Becker. 2011. Vergleich unterschiedlicher RNA-Extraktionskits und Primer-/Sondensysteme zum Nachweis von humanem Norovirus in Lebensmitteln mittels real-time RT-PCR. In: .","din1505-2-1":"Mormann, S. ; Becker, Barbara: Vergleich unterschiedlicher RNA-Extraktionskits und Primer-/Sondensysteme zum Nachweis von humanem Norovirus in Lebensmitteln mittels real-time RT-PCR. In: , 2011","van":"Mormann S, Becker B. Vergleich unterschiedlicher RNA-Extraktionskits und Primer-/Sondensysteme zum Nachweis von humanem Norovirus in Lebensmitteln mittels real-time RT-PCR. In 2011.","ufg":"Mormann, S./Becker, Barbara: Vergleich unterschiedlicher RNA-Extraktionskits und Primer-/Sondensysteme zum Nachweis von humanem Norovirus in Lebensmitteln mittels real-time RT-PCR, in: o. Hg.: o. O. 2011.","havard":"S. Mormann, B. Becker, Vergleich unterschiedlicher RNA-Extraktionskits und Primer-/Sondensysteme zum Nachweis von humanem Norovirus in Lebensmitteln mittels real-time RT-PCR, in: 2011.","bjps":"Mormann S and Becker B (2011) Vergleich Unterschiedlicher RNA-Extraktionskits Und Primer-/Sondensysteme Zum Nachweis von Humanem Norovirus in Lebensmitteln Mittels Real-Time RT-PCR.","mla":"Mormann, S., and Barbara Becker. Vergleich Unterschiedlicher RNA-Extraktionskits Und Primer-/Sondensysteme Zum Nachweis von Humanem Norovirus in Lebensmitteln Mittels Real-Time RT-PCR. 2011.","apa":"Mormann, S., & Becker, B. (2011). Vergleich unterschiedlicher RNA-Extraktionskits und Primer-/Sondensysteme zum Nachweis von humanem Norovirus in Lebensmitteln mittels real-time RT-PCR. Fachsymposium Lebensmittelmikrobiologie, Damp .","chicago":"Mormann, S., and Barbara Becker. “Vergleich Unterschiedlicher RNA-Extraktionskits Und Primer-/Sondensysteme Zum Nachweis von Humanem Norovirus in Lebensmitteln Mittels Real-Time RT-PCR,” 2011.","ama":"Mormann S, Becker B. Vergleich unterschiedlicher RNA-Extraktionskits und Primer-/Sondensysteme zum Nachweis von humanem Norovirus in Lebensmitteln mittels real-time RT-PCR. In: ; 2011.","ieee":"S. Mormann and B. Becker, “Vergleich unterschiedlicher RNA-Extraktionskits und Primer-/Sondensysteme zum Nachweis von humanem Norovirus in Lebensmitteln mittels real-time RT-PCR,” presented at the Fachsymposium Lebensmittelmikrobiologie, Damp , 2011."},"title":"Vergleich unterschiedlicher RNA-Extraktionskits und Primer-/Sondensysteme zum Nachweis von humanem Norovirus in Lebensmitteln mittels real-time RT-PCR"},{"citation":{"ieee":"J. Pfannebecker and B. Becker, “Validierungsstudie eines kulturellen, mikrobiologischen Nachweissystems mit ausgewählten Rohstoffen,” presented at the Fachsymposium Lebensmittelmikrobiologie (Poster), Damp, 2011.","ama":"Pfannebecker J, Becker B. Validierungsstudie eines kulturellen, mikrobiologischen Nachweissystems mit ausgewählten Rohstoffen. In: ; 2011.","apa":"Pfannebecker, J., & Becker, B. (2011). Validierungsstudie eines kulturellen, mikrobiologischen Nachweissystems mit ausgewählten Rohstoffen. Fachsymposium Lebensmittelmikrobiologie (Poster), Damp.","chicago":"Pfannebecker, Jens, and Barbara Becker. “Validierungsstudie Eines Kulturellen, Mikrobiologischen Nachweissystems Mit Ausgewählten Rohstoffen,” 2011.","van":"Pfannebecker J, Becker B. Validierungsstudie eines kulturellen, mikrobiologischen Nachweissystems mit ausgewählten Rohstoffen. In 2011.","havard":"J. Pfannebecker, B. Becker, Validierungsstudie eines kulturellen, mikrobiologischen Nachweissystems mit ausgewählten Rohstoffen, in: 2011.","mla":"Pfannebecker, Jens, and Barbara Becker. Validierungsstudie Eines Kulturellen, Mikrobiologischen Nachweissystems Mit Ausgewählten Rohstoffen. 2011.","bjps":"Pfannebecker J and Becker B (2011) Validierungsstudie Eines Kulturellen, Mikrobiologischen Nachweissystems Mit Ausgewählten Rohstoffen.","ufg":"Pfannebecker, Jens/Becker, Barbara: Validierungsstudie eines kulturellen, mikrobiologischen Nachweissystems mit ausgewählten Rohstoffen, in: o. Hg.: o. O. 2011.","short":"J. Pfannebecker, B. Becker, in: 2011.","chicago-de":"Pfannebecker, Jens und Barbara Becker. 2011. Validierungsstudie eines kulturellen, mikrobiologischen Nachweissystems mit ausgewählten Rohstoffen. In: .","din1505-2-1":"Pfannebecker, Jens ; Becker, Barbara: Validierungsstudie eines kulturellen, mikrobiologischen Nachweissystems mit ausgewählten Rohstoffen. In: , 2011"},"title":"Validierungsstudie eines kulturellen, mikrobiologischen Nachweissystems mit ausgewählten Rohstoffen","status":"public","department":[{"_id":"DEP4023"},{"_id":"DEP4026"}],"conference":{"name":"Fachsymposium Lebensmittelmikrobiologie (Poster)","location":"Damp","start_date":"2011-01-06","end_date":"2011-01-06"},"year":"2011","author":[{"first_name":"Jens","id":"45690","full_name":"Pfannebecker, Jens","last_name":"Pfannebecker"},{"full_name":"Becker, Barbara","first_name":"Barbara","id":"12640","last_name":"Becker"}],"date_updated":"2024-04-29T10:30:42Z","user_id":"83778","date_created":"2021-03-29T08:55:34Z","type":"conference_abstract","language":[{"iso":"eng"}],"_id":"5340"},{"date_updated":"2024-05-17T12:58:24Z","user_id":"83778","intvolume":" 91","type":"journal_article","date_created":"2021-03-29T09:17:02Z","publication":"Fleischwirtschaft ","language":[{"iso":"ger"}],"_id":"5341","volume":91,"citation":{"short":"A. Stiebing, H. Thumel, Fleischwirtschaft 91 (2011) 86–91.","chicago-de":"Stiebing, Achim und H. Thumel. 2011. Prämierungen belegen hohes Niveau – DLG-Qualitätsprüfungen 2010 und 2011 – Rohwürste und Rohpökelwaren. Fleischwirtschaft 91, Nr. 9: 86–91.","din1505-2-1":"Stiebing, Achim ; Thumel, H.: Prämierungen belegen hohes Niveau – DLG-Qualitätsprüfungen 2010 und 2011 – Rohwürste und Rohpökelwaren. In: Fleischwirtschaft Bd. 91 (2011), Nr. 9, S. 86–91","van":"Stiebing A, Thumel H. Prämierungen belegen hohes Niveau – DLG-Qualitätsprüfungen 2010 und 2011 – Rohwürste und Rohpökelwaren. Fleischwirtschaft . 2011;91(9):86–91.","ama":"Stiebing A, Thumel H. Prämierungen belegen hohes Niveau – DLG-Qualitätsprüfungen 2010 und 2011 – Rohwürste und Rohpökelwaren. Fleischwirtschaft . 2011;91(9):86-91.","ufg":"Stiebing, Achim/Thumel, H.: Prämierungen belegen hohes Niveau – DLG-Qualitätsprüfungen 2010 und 2011 – Rohwürste und Rohpökelwaren, in: Fleischwirtschaft 91 (2011), H. 9, S. 86–91.","havard":"A. Stiebing, H. Thumel, Prämierungen belegen hohes Niveau – DLG-Qualitätsprüfungen 2010 und 2011 – Rohwürste und Rohpökelwaren, Fleischwirtschaft . 91 (2011) 86–91.","bjps":"Stiebing A and Thumel H (2011) Prämierungen belegen hohes Niveau – DLG-Qualitätsprüfungen 2010 und 2011 – Rohwürste und Rohpökelwaren. Fleischwirtschaft 91, 86–91.","mla":"Stiebing, Achim, and H. Thumel. “Prämierungen belegen hohes Niveau – DLG-Qualitätsprüfungen 2010 und 2011 – Rohwürste und Rohpökelwaren.” Fleischwirtschaft , vol. 91, no. 9, 2011, pp. 86–91.","apa":"Stiebing, A., & Thumel, H. (2011). Prämierungen belegen hohes Niveau – DLG-Qualitätsprüfungen 2010 und 2011 – Rohwürste und Rohpökelwaren. Fleischwirtschaft , 91(9), 86–91.","ieee":"A. Stiebing and H. Thumel, “Prämierungen belegen hohes Niveau – DLG-Qualitätsprüfungen 2010 und 2011 – Rohwürste und Rohpökelwaren,” Fleischwirtschaft , vol. 91, no. 9, pp. 86–91, 2011.","chicago":"Stiebing, Achim, and H. Thumel. “Prämierungen belegen hohes Niveau – DLG-Qualitätsprüfungen 2010 und 2011 – Rohwürste und Rohpökelwaren.” Fleischwirtschaft 91, no. 9 (2011): 86–91."},"title":"Prämierungen belegen hohes Niveau – DLG-Qualitätsprüfungen 2010 und 2011 – Rohwürste und Rohpökelwaren","page":"86-91","status":"public","department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"year":"2011","author":[{"full_name":"Stiebing, Achim","id":"12235","first_name":"Achim","last_name":"Stiebing"},{"last_name":"Thumel","first_name":"H.","full_name":"Thumel, H."}],"issue":"9"},{"title":"Kennzeichnung nicht zwingend erforderlich – Einfluss von Transglutaminase auf den Zusammenhalt von Rohschinken mit unterschiedlichem Salzgehalt","volume":91,"citation":{"ieee":"A. Stiebing and B. Schmidt, “Kennzeichnung nicht zwingend erforderlich – Einfluss von Transglutaminase auf den Zusammenhalt von Rohschinken mit unterschiedlichem Salzgehalt,” Fleischwirtschaft, vol. 91, no. 11, p. S. 44-46, 2011.","ama":"Stiebing A, Schmidt B. Kennzeichnung nicht zwingend erforderlich – Einfluss von Transglutaminase auf den Zusammenhalt von Rohschinken mit unterschiedlichem Salzgehalt. Fleischwirtschaft. 2011;91(11):S. 44-46.","apa":"Stiebing, A., & Schmidt, B. (2011). Kennzeichnung nicht zwingend erforderlich – Einfluss von Transglutaminase auf den Zusammenhalt von Rohschinken mit unterschiedlichem Salzgehalt. Fleischwirtschaft, 91(11), S. 44-46.","chicago":"Stiebing, Achim, and Bastian Schmidt. “Kennzeichnung nicht zwingend erforderlich – Einfluss von Transglutaminase auf den Zusammenhalt von Rohschinken mit unterschiedlichem Salzgehalt.” Fleischwirtschaft 91, no. 11 (2011): S. 44-46.","van":"Stiebing A, Schmidt B. Kennzeichnung nicht zwingend erforderlich – Einfluss von Transglutaminase auf den Zusammenhalt von Rohschinken mit unterschiedlichem Salzgehalt. Fleischwirtschaft. 2011;91(11):S. 44-46.","ufg":"Stiebing, Achim/Schmidt, Bastian (2011): Kennzeichnung nicht zwingend erforderlich – Einfluss von Transglutaminase auf den Zusammenhalt von Rohschinken mit unterschiedlichem Salzgehalt, in: Fleischwirtschaft 91 (11), S. S. 44-46.","mla":"Stiebing, Achim, and Bastian Schmidt. “Kennzeichnung nicht zwingend erforderlich – Einfluss von Transglutaminase auf den Zusammenhalt von Rohschinken mit unterschiedlichem Salzgehalt.” Fleischwirtschaft, vol. 91, no. 11, 2011, p. S. 44-46.","bjps":"Stiebing A and Schmidt B (2011) Kennzeichnung nicht zwingend erforderlich – Einfluss von Transglutaminase auf den Zusammenhalt von Rohschinken mit unterschiedlichem Salzgehalt. Fleischwirtschaft 91, S. 44-46.","havard":"A. Stiebing, B. Schmidt, Kennzeichnung nicht zwingend erforderlich – Einfluss von Transglutaminase auf den Zusammenhalt von Rohschinken mit unterschiedlichem Salzgehalt, Fleischwirtschaft. 91 (2011) S. 44-46.","short":"A. Stiebing, B. Schmidt, Fleischwirtschaft 91 (2011) S. 44-46.","chicago-de":"Stiebing, Achim und Bastian Schmidt. 2011. Kennzeichnung nicht zwingend erforderlich – Einfluss von Transglutaminase auf den Zusammenhalt von Rohschinken mit unterschiedlichem Salzgehalt. Fleischwirtschaft 91, Nr. 11: S. 44-46.","din1505-2-1":"Stiebing, Achim ; Schmidt, Bastian: Kennzeichnung nicht zwingend erforderlich – Einfluss von Transglutaminase auf den Zusammenhalt von Rohschinken mit unterschiedlichem Salzgehalt. In: Fleischwirtschaft Bd. 91 (2011), Nr. 11, S. S. 44-46"},"issue":"11","department":[{"_id":"DEP4023"},{"_id":"DEP4019"}],"author":[{"full_name":"Stiebing, Achim","id":"12235","first_name":"Achim","last_name":"Stiebing"},{"full_name":"Schmidt, Bastian","last_name":"Schmidt","id":"69980","first_name":"Bastian"}],"year":2011,"page":"S. 44-46","status":"public","date_created":"2021-03-29T09:20:40Z","type":"journal_article","publication":"Fleischwirtschaft","intvolume":" 91","date_updated":"2023-03-15T13:49:58Z","user_id":"79260","_id":"5342","language":[{"iso":"ger"}]},{"publisher":"Wiley-VCH","status":"public","page":"S. 33","issue":"2","year":"2011","author":[{"first_name":"Jürgen","last_name":"Zapp","full_name":"Zapp, Jürgen","id":"12568"},{"first_name":"R.","full_name":"Torenz, R.","last_name":"Torenz"}],"department":[{"_id":"DEP4023"},{"_id":"DEP4026"}],"citation":{"mla":"Zapp, Jürgen, and R. Torenz. “Auswirkungen von Rohkaffeedämpfung und Röstung auf die Kaffeesäuren.” ebensmittelchemie : Zeitschrift der Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker , vol. 65, no. 2, 2011, p. S. 33, https://doi.org/ https://doi.org/10.1002/lemi.201290041.","bjps":"Zapp J and Torenz R (2011) Auswirkungen von Rohkaffeedämpfung und Röstung auf die Kaffeesäuren. ebensmittelchemie : Zeitschrift der Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker 65, S. 33.","havard":"J. Zapp, R. Torenz, Auswirkungen von Rohkaffeedämpfung und Röstung auf die Kaffeesäuren, ebensmittelchemie : Zeitschrift der Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker . 65 (2011) S. 33.","ufg":"Zapp, Jürgen/Torenz, R.: Auswirkungen von Rohkaffeedämpfung und Röstung auf die Kaffeesäuren, in: ebensmittelchemie : Zeitschrift der Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker 65 (2011), H. 2, S. S. 33.","van":"Zapp J, Torenz R. Auswirkungen von Rohkaffeedämpfung und Röstung auf die Kaffeesäuren. ebensmittelchemie : Zeitschrift der Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker . 2011;65(2):S. 33.","chicago":"Zapp, Jürgen, and R. Torenz. “Auswirkungen von Rohkaffeedämpfung und Röstung auf die Kaffeesäuren.” ebensmittelchemie : Zeitschrift der Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker 65, no. 2 (2011): S. 33. https://doi.org/ https://doi.org/10.1002/lemi.201290041.","apa":"Zapp, J., & Torenz, R. (2011). Auswirkungen von Rohkaffeedämpfung und Röstung auf die Kaffeesäuren. ebensmittelchemie : Zeitschrift der Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker , 65(2), S. 33. https://doi.org/ https://doi.org/10.1002/lemi.201290041","chicago-de":"Zapp, Jürgen und R. Torenz. 2011. Auswirkungen von Rohkaffeedämpfung und Röstung auf die Kaffeesäuren. ebensmittelchemie : Zeitschrift der Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker 65, Nr. 2: S. 33. doi: https://doi.org/10.1002/lemi.201290041, .","din1505-2-1":"Zapp, Jürgen ; Torenz, R.: Auswirkungen von Rohkaffeedämpfung und Röstung auf die Kaffeesäuren. In: ebensmittelchemie : Zeitschrift der Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker Bd. 65, Wiley-VCH (2011), Nr. 2, S. S. 33","short":"J. Zapp, R. Torenz, ebensmittelchemie : Zeitschrift der Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker 65 (2011) S. 33.","ama":"Zapp J, Torenz R. Auswirkungen von Rohkaffeedämpfung und Röstung auf die Kaffeesäuren. ebensmittelchemie : Zeitschrift der Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker . 2011;65(2):S. 33. doi: https://doi.org/10.1002/lemi.201290041","ieee":"J. Zapp and R. Torenz, “Auswirkungen von Rohkaffeedämpfung und Röstung auf die Kaffeesäuren,” ebensmittelchemie : Zeitschrift der Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker , vol. 65, no. 2, p. S. 33, 2011, doi: https://doi.org/10.1002/lemi.201290041."},"volume":65,"publication_status":"published","title":"Auswirkungen von Rohkaffeedämpfung und Röstung auf die Kaffeesäuren","_id":"5343","doi":" https://doi.org/10.1002/lemi.201290041","language":[{"iso":"ger"}],"intvolume":" 65","user_id":"83781","date_updated":"2024-05-21T07:01:17Z","publication":"ebensmittelchemie : Zeitschrift der Lebensmittelchemischen Gesellschaft, Fachgruppe in der Gesellschaft Deutscher Chemiker ","publication_identifier":{"issn":["0937-1478"],"eissn":["1521-3811 "]},"type":"journal_article","date_created":"2021-03-29T09:24:46Z"},{"status":"public","page":"407-418","year":2011,"author":[{"first_name":"Pia","full_name":"Schneider, Pia","last_name":"Schneider","id":"75629"},{"full_name":"Hosseiny, S. S.","first_name":"S. S.","last_name":"Hosseiny"},{"first_name":"F.","last_name":"Bischoff","full_name":"Bischoff, F."},{"id":"12119","first_name":"Ulrich","full_name":"Müller, Ulrich","last_name":"Müller"},{"full_name":"Bart, H. J.","first_name":"H. J.","last_name":"Bart"},{"last_name":"Schlitter","full_name":"Schlitter, K.","first_name":"K."},{"full_name":"Jordan, V.","first_name":"V.","last_name":"Jordan"}],"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"abstract":[{"text":"\r\nThe pentacyclic triterpenes oleanolic acid (OA) and ursolic acid (UA) in Salvia triloba are attractive ingredients for cosmetic and pharmaceutical formulations. These triterpenoids are constitution isomers and differ only in the position of one methyl group in their chemical structures. Therefore it is difficult to achieve a baseline separation by standard RP-HPLC systems. Another challenge is that the complex plant contains a large variety of similar compounds. To achieve precise results for the target molecules, these compounds should be removed prior to analysis. Due to the large application of these two triterpenes, a fast quantification method is favored. If the triterpenes are extracted with aqueous two-phase systems, the target substances are enriched in a surfactant-rich phase. For this application, it is desirable to develop a method that is capable of quantifying both triterpenes directly by RP-HPLC without additional purification steps.\r\n\r\nThe optimal chromatographic conditions for pure substances as well as for crude surfactant-containing extracts were accomplished on a Nucleodur C18 ISIS column by isocratic elution with methanol/water/acetic acid/triethanolamine (90:10:0.04:0.02 v/v) as the mobile phase and a column temperature of 10°C. The flow rate was 0.6 mL/min, and the detection wavelength was 210 nm. With these parameters, a baseline separation was achieved and the calibration curve showed a very good linearity (R2 > 0.999 for OA and UA) within the test range. The method is simple, rapid, and reliable for the quantification of crude extracts from plant material.\r\n","lang":"eng"}],"citation":{"ieee":"P. Schneider et al., “SURFACTANT MEDIATED EXTRACTION OF TRITERPENES AND THEIR DIRECT HPLC ANALYSIS FROM THE MICELLAR SYSTEM,” Instrumentation Science & Technology, pp. 407–418, 2011.","ama":"Schneider P, Hosseiny SS, Bischoff F, et al. SURFACTANT MEDIATED EXTRACTION OF TRITERPENES AND THEIR DIRECT HPLC ANALYSIS FROM THE MICELLAR SYSTEM. Instrumentation Science & Technology. 2011:407-418. doi:10.1080/10739149.2011.602167","din1505-2-1":"Schneider, Pia ; Hosseiny, S. S. ; Bischoff, F. ; Müller, Ulrich ; Bart, H. J. ; Schlitter, K. ; Jordan, V.: SURFACTANT MEDIATED EXTRACTION OF TRITERPENES AND THEIR DIRECT HPLC ANALYSIS FROM THE MICELLAR SYSTEM. In: Instrumentation Science & Technology (2011), S. 407–418","chicago-de":"Schneider, Pia, S. S. Hosseiny, F. Bischoff, Ulrich Müller, H. J. Bart, K. Schlitter und V. Jordan. 2011. SURFACTANT MEDIATED EXTRACTION OF TRITERPENES AND THEIR DIRECT HPLC ANALYSIS FROM THE MICELLAR SYSTEM. Instrumentation Science & Technology: 407–418. doi:10.1080/10739149.2011.602167, .","short":"P. Schneider, S.S. Hosseiny, F. Bischoff, U. Müller, H.J. Bart, K. Schlitter, V. Jordan, Instrumentation Science & Technology (2011) 407–418.","chicago":"Schneider, Pia, S. S. Hosseiny, F. Bischoff, Ulrich Müller, H. J. Bart, K. Schlitter, and V. Jordan. “SURFACTANT MEDIATED EXTRACTION OF TRITERPENES AND THEIR DIRECT HPLC ANALYSIS FROM THE MICELLAR SYSTEM.” Instrumentation Science & Technology, 2011, 407–18. https://doi.org/10.1080/10739149.2011.602167.","apa":"Schneider, P., Hosseiny, S. S., Bischoff, F., Müller, U., Bart, H. J., Schlitter, K., & Jordan, V. (2011). SURFACTANT MEDIATED EXTRACTION OF TRITERPENES AND THEIR DIRECT HPLC ANALYSIS FROM THE MICELLAR SYSTEM. Instrumentation Science & Technology, 407–418. https://doi.org/10.1080/10739149.2011.602167","bjps":"Schneider P et al. (2011) SURFACTANT MEDIATED EXTRACTION OF TRITERPENES AND THEIR DIRECT HPLC ANALYSIS FROM THE MICELLAR SYSTEM. Instrumentation Science & Technology 407–418.","mla":"Schneider, Pia, et al. “SURFACTANT MEDIATED EXTRACTION OF TRITERPENES AND THEIR DIRECT HPLC ANALYSIS FROM THE MICELLAR SYSTEM.” Instrumentation Science & Technology, 2011, pp. 407–18, doi:10.1080/10739149.2011.602167.","havard":"P. Schneider, S.S. Hosseiny, F. Bischoff, U. Müller, H.J. Bart, K. Schlitter, V. Jordan, SURFACTANT MEDIATED EXTRACTION OF TRITERPENES AND THEIR DIRECT HPLC ANALYSIS FROM THE MICELLAR SYSTEM, Instrumentation Science & Technology. (2011) 407–418.","ufg":"Schneider, Pia et. al. (2011): SURFACTANT MEDIATED EXTRACTION OF TRITERPENES AND THEIR DIRECT HPLC ANALYSIS FROM THE MICELLAR SYSTEM, in: Instrumentation Science & Technology, S. 407–418.","van":"Schneider P, Hosseiny SS, Bischoff F, Müller U, Bart HJ, Schlitter K, et al. SURFACTANT MEDIATED EXTRACTION OF TRITERPENES AND THEIR DIRECT HPLC ANALYSIS FROM THE MICELLAR SYSTEM. Instrumentation Science & Technology. 2011;407–18."},"publication_status":"published","title":"SURFACTANT MEDIATED EXTRACTION OF TRITERPENES AND THEIR DIRECT HPLC ANALYSIS FROM THE MICELLAR SYSTEM","keyword":["oleanolic acid","Salvia triloba","surfactants","triterpenes","ursolic acid"],"language":[{"iso":"eng"}],"_id":"5406","doi":"10.1080/10739149.2011.602167","user_id":"15514","date_updated":"2023-03-15T13:49:59Z","publication":"Instrumentation Science & Technology","publication_identifier":{"eissn":["1525-6030"],"issn":["1073-9149"]},"date_created":"2021-04-07T12:32:48Z","type":"journal_article"},{"type":"conference_abstract","date_created":"2021-04-07T13:01:24Z","date_updated":"2023-03-15T13:49:59Z","user_id":"45673","_id":"5409","language":[{"iso":"eng"}],"title":"Investigation on increasing the velocity of the freeze drying by friction effects","publication_status":"published","citation":{"apa":"Pliske, R., & Müller, U. (2011). Investigation on increasing the velocity of the freeze drying by friction effects. Presented at the 1st European Congress of Applied Biotechnology ECAB 2011 gemeinsam mit ECCE 2011, Berlin.","chicago":"Pliske, Roland, and Ulrich Müller. “Investigation on Increasing the Velocity of the Freeze Drying by Friction Effects,” 2011.","van":"Pliske R, Müller U. Investigation on increasing the velocity of the freeze drying by friction effects. In 2011.","ufg":"Pliske, Roland/Müller, Ulrich (2011): Investigation on increasing the velocity of the freeze drying by friction effects, in: .","bjps":"Pliske R and Müller U (2011) Investigation on Increasing the Velocity of the Freeze Drying by Friction Effects.","havard":"R. Pliske, U. Müller, Investigation on increasing the velocity of the freeze drying by friction effects, in: 2011.","mla":"Pliske, Roland, and Ulrich Müller. Investigation on Increasing the Velocity of the Freeze Drying by Friction Effects. 2011.","short":"R. Pliske, U. Müller, in: 2011.","chicago-de":"Pliske, Roland und Ulrich Müller. 2011. Investigation on increasing the velocity of the freeze drying by friction effects. In: .","din1505-2-1":"Pliske, Roland ; Müller, Ulrich: Investigation on increasing the velocity of the freeze drying by friction effects. In: , 2011","ieee":"R. Pliske and U. Müller, “Investigation on increasing the velocity of the freeze drying by friction effects,” presented at the 1st European Congress of Applied Biotechnology ECAB 2011 gemeinsam mit ECCE 2011, Berlin, 2011.","ama":"Pliske R, Müller U. Investigation on increasing the velocity of the freeze drying by friction effects. In: ; 2011."},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"conference":{"location":"Berlin","name":"1st European Congress of Applied Biotechnology ECAB 2011 gemeinsam mit ECCE 2011","start_date":"2011-09-25","end_date":"2011-09-29"},"author":[{"id":"12864","full_name":"Pliske, Roland","first_name":"Roland","last_name":"Pliske"},{"id":"12119","full_name":"Müller, Ulrich","first_name":"Ulrich","last_name":"Müller"}],"year":2011,"status":"public"},{"publication_status":"published","citation":{"havard":"J. Zapp, A. Wagner, Numerische Strömungssimulation in der Verfahrenstechnik, in: Fachtagung Numerische Strömungssimulation, Lemgo, 2011.","bjps":"Zapp J and Wagner A (2011) Numerische Strömungssimulation in der Verfahrenstechnik. Fachtagung Numerische Strömungssimulation. Lemgo.","mla":"Zapp, Jürgen, and A. Wagner. “Numerische Strömungssimulation in der Verfahrenstechnik.” Fachtagung Numerische Strömungssimulation, 2011.","ufg":"Zapp, Jürgen/Wagner, A. (2011): Numerische Strömungssimulation in der Verfahrenstechnik, in: Fachtagung Numerische Strömungssimulation, Lemgo.","van":"Zapp J, Wagner A. Numerische Strömungssimulation in der Verfahrenstechnik. In: Fachtagung Numerische Strömungssimulation. Lemgo; 2011.","chicago":"Zapp, Jürgen, and A. Wagner. “Numerische Strömungssimulation in der Verfahrenstechnik.” In Fachtagung Numerische Strömungssimulation. Lemgo, 2011.","apa":"Zapp, J., & Wagner, A. (2011). Numerische Strömungssimulation in der Verfahrenstechnik. In Fachtagung Numerische Strömungssimulation. Lemgo.","chicago-de":"Zapp, Jürgen und A. Wagner. 2011. Numerische Strömungssimulation in der Verfahrenstechnik. In: Fachtagung Numerische Strömungssimulation. Lemgo.","din1505-2-1":"Zapp, Jürgen ; Wagner, A.: Numerische Strömungssimulation in der Verfahrenstechnik. In: Fachtagung Numerische Strömungssimulation. Lemgo, 2011","short":"J. Zapp, A. Wagner, in: Fachtagung Numerische Strömungssimulation, Lemgo, 2011.","ama":"Zapp J, Wagner A. Numerische Strömungssimulation in der Verfahrenstechnik. In: Fachtagung Numerische Strömungssimulation. Lemgo; 2011.","ieee":"J. Zapp and A. Wagner, “Numerische Strömungssimulation in der Verfahrenstechnik,” in Fachtagung Numerische Strömungssimulation, Lemgo, 2011."},"title":"Numerische Strömungssimulation in der Verfahrenstechnik","status":"public","department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"conference":{"start_date":"2011-10-07","name":"Fachtagung Numerische Strömungssimulation","location":"Lemgo"},"author":[{"last_name":"Zapp","full_name":"Zapp, Jürgen","id":"12568","first_name":"Jürgen"},{"last_name":"Wagner","first_name":"A.","full_name":"Wagner, A."}],"year":2011,"date_updated":"2023-03-15T13:49:59Z","user_id":"15514","date_created":"2021-04-07T13:09:58Z","type":"conference","publication":"Fachtagung Numerische Strömungssimulation","language":[{"iso":"ger"}],"place":"Lemgo","_id":"5410"},{"publication":"Fresenius Tagung \"Analytik und QS\", Mainz, 13./14.10.2011","type":"conference","date_created":"2021-04-07T13:19:30Z","user_id":"83778","date_updated":"2024-04-29T10:17:23Z","_id":"5411","language":[{"iso":"eng"}],"title":"Mikrobiologische Richt- und Warnwerte aus der DGHM","citation":{"ieee":"B. Becker, “Mikrobiologische Richt- und Warnwerte aus der DGHM,” presented at the Fresenius Tagung “Analytik und QS,” Mainz, 2011.","ama":"Becker B. Mikrobiologische Richt- und Warnwerte aus der DGHM. In: Fresenius Tagung “Analytik Und QS”, Mainz, 13./14.10.2011. ; 2011.","din1505-2-1":"Becker, Barbara: Mikrobiologische Richt- und Warnwerte aus der DGHM. In: Fresenius Tagung „Analytik und QS“, Mainz, 13./14.10.2011, 2011","chicago-de":"Becker, Barbara. 2011. Mikrobiologische Richt- und Warnwerte aus der DGHM. In: Fresenius Tagung „Analytik und QS“, Mainz, 13./14.10.2011.","short":"B. Becker, in: Fresenius Tagung “Analytik Und QS”, Mainz, 13./14.10.2011, 2011.","chicago":"Becker, Barbara. “Mikrobiologische Richt- Und Warnwerte Aus Der DGHM.” In Fresenius Tagung “Analytik Und QS”, Mainz, 13./14.10.2011, 2011.","apa":"Becker, B. (2011). Mikrobiologische Richt- und Warnwerte aus der DGHM. Fresenius Tagung “Analytik Und QS”, Mainz, 13./14.10.2011. Fresenius Tagung “Analytik und QS,” Mainz.","ufg":"Becker, Barbara: Mikrobiologische Richt- und Warnwerte aus der DGHM, in: o. Hg.: Fresenius Tagung „Analytik und QS“, Mainz, 13./14.10.2011, o. O. 2011.","mla":"Becker, Barbara. “Mikrobiologische Richt- Und Warnwerte Aus Der DGHM.” Fresenius Tagung “Analytik Und QS”, Mainz, 13./14.10.2011, 2011.","bjps":"Becker B (2011) Mikrobiologische Richt- Und Warnwerte Aus Der DGHM. Fresenius Tagung ‘Analytik Und QS’, Mainz, 13./14.10.2011.","havard":"B. Becker, Mikrobiologische Richt- und Warnwerte aus der DGHM, in: Fresenius Tagung “Analytik Und QS”, Mainz, 13./14.10.2011, 2011.","van":"Becker B. Mikrobiologische Richt- und Warnwerte aus der DGHM. In: Fresenius Tagung “Analytik und QS”, Mainz, 13/14102011. 2011."},"publication_status":"published","year":"2011","author":[{"last_name":"Becker","first_name":"Barbara","full_name":"Becker, Barbara","id":"12640"}],"conference":{"name":"Fresenius Tagung \"Analytik und QS\"","location":"Mainz","start_date":"2011-10-13","end_date":"2011-10-14"},"department":[{"_id":"DEP4023"},{"_id":"DEP4026"}],"status":"public"},{"publication":"Fresenius Fachtagung Abfüllung sensibler Getränke, Berlin, 29.-30.10.2011","date_created":"2021-04-07T13:23:48Z","type":"conference","user_id":"83779","date_updated":"2024-05-24T07:20:31Z","_id":"5412","language":[{"iso":"ger"}],"title":"Minimal Processing - Der Weg zur Produkt und Ressourcen schonenden Getränkepasteurisation","citation":{"ieee":"J. Schneider, K. Schwarzer, A. Dammann, U. Müller, and M. Voetz, “Minimal Processing - Der Weg zur Produkt und Ressourcen schonenden Getränkepasteurisation,” presented at the Fresenius Fachtagung Abfüllung sensibler Getränke, Berlin, 2011.","ama":"Schneider J, Schwarzer K, Dammann A, Müller U, Voetz M. Minimal Processing - Der Weg zur Produkt und Ressourcen schonenden Getränkepasteurisation. In: Fresenius Fachtagung Abfüllung sensibler Getränke, Berlin, 29.-30.10.2011. ; 2011.","chicago":"Schneider, Jan, Knut Schwarzer, Anna Dammann, Ulrich Müller, and M. Voetz. “Minimal Processing - Der Weg zur Produkt und Ressourcen schonenden Getränkepasteurisation.” In Fresenius Fachtagung Abfüllung sensibler Getränke, Berlin, 29.-30.10.2011, 2011.","apa":"Schneider, J., Schwarzer, K., Dammann, A., Müller, U., & Voetz, M. (2011). Minimal Processing - Der Weg zur Produkt und Ressourcen schonenden Getränkepasteurisation. Fresenius Fachtagung Abfüllung sensibler Getränke, Berlin, 29.-30.10.2011. Fresenius Fachtagung Abfüllung sensibler Getränke, Berlin.","ufg":"Schneider, Jan u. a.: Minimal Processing - Der Weg zur Produkt und Ressourcen schonenden Getränkepasteurisation, in: o. Hg.: Fresenius Fachtagung Abfüllung sensibler Getränke, Berlin, 29.-30.10.2011, o. O. 2011.","havard":"J. Schneider, K. Schwarzer, A. Dammann, U. Müller, M. Voetz, Minimal Processing - Der Weg zur Produkt und Ressourcen schonenden Getränkepasteurisation, in: Fresenius Fachtagung Abfüllung sensibler Getränke, Berlin, 29.-30.10.2011, 2011.","mla":"Schneider, Jan, et al. “Minimal Processing - Der Weg zur Produkt und Ressourcen schonenden Getränkepasteurisation.” Fresenius Fachtagung Abfüllung sensibler Getränke, Berlin, 29.-30.10.2011, 2011.","bjps":"Schneider J et al. (2011) Minimal Processing - Der Weg zur Produkt und Ressourcen schonenden Getränkepasteurisation. Fresenius Fachtagung Abfüllung sensibler Getränke, Berlin, 29.-30.10.2011.","van":"Schneider J, Schwarzer K, Dammann A, Müller U, Voetz M. Minimal Processing - Der Weg zur Produkt und Ressourcen schonenden Getränkepasteurisation. In: Fresenius Fachtagung Abfüllung sensibler Getränke, Berlin, 29-30102011. 2011.","din1505-2-1":"Schneider, Jan ; Schwarzer, Knut ; Dammann, Anna ; Müller, Ulrich ; Voetz, M.: Minimal Processing - Der Weg zur Produkt und Ressourcen schonenden Getränkepasteurisation. In: Fresenius Fachtagung Abfüllung sensibler Getränke, Berlin, 29.-30.10.2011, 2011","chicago-de":"Schneider, Jan, Knut Schwarzer, Anna Dammann, Ulrich Müller und M. Voetz. 2011. Minimal Processing - Der Weg zur Produkt und Ressourcen schonenden Getränkepasteurisation. In: Fresenius Fachtagung Abfüllung sensibler Getränke, Berlin, 29.-30.10.2011.","short":"J. Schneider, K. Schwarzer, A. Dammann, U. Müller, M. Voetz, in: Fresenius Fachtagung Abfüllung sensibler Getränke, Berlin, 29.-30.10.2011, 2011."},"publication_status":"published","year":"2011","author":[{"orcid":"0000-0001-6401-8873","first_name":"Jan","full_name":"Schneider, Jan","last_name":"Schneider","id":"13209"},{"id":"13329","first_name":"Knut","full_name":"Schwarzer, Knut","last_name":"Schwarzer"},{"first_name":"Anna","full_name":"Dammann, Anna","last_name":"Dammann"},{"first_name":"Ulrich","full_name":"Müller, Ulrich","last_name":"Müller","id":"12119"},{"first_name":"M.","full_name":"Voetz, M.","last_name":"Voetz"}],"department":[{"_id":"DEP4023"},{"_id":"DEP4009"},{"_id":"DEP4018"}],"conference":{"name":"Fresenius Fachtagung Abfüllung sensibler Getränke","location":"Berlin","end_date":"2011-10-30","start_date":"2011-10-29"},"status":"public"},{"title":"Bedeutung von Viren in der Lebensmittelproduktion","publication_status":"published","citation":{"ieee":"B. Becker, “Bedeutung von Viren in der Lebensmittelproduktion,” presented at the GDL-Forum in Verbindung mit der EFFoST Annual Conference \"Process-Structure-Functions-Relationships”, Berlin, 2011.","ama":"Becker B. Bedeutung von Viren in der Lebensmittelproduktion. In: GDL-Forum in Verbindung mit der EFFoST Annual Conference \"Process-Structure-Functions-Relationships”, Berlin, 09.-11.11.2011. ; 2011.","chicago-de":"Becker, Barbara. 2011. Bedeutung von Viren in der Lebensmittelproduktion. In: GDL-Forum in Verbindung mit der EFFoST Annual Conference \"Process-Structure-Functions-Relationships”, Berlin, 09.-11.11.2011.","din1505-2-1":"Becker, Barbara: Bedeutung von Viren in der Lebensmittelproduktion. In: GDL-Forum in Verbindung mit der EFFoST Annual Conference \"Process-Structure-Functions-Relationships”, Berlin, 09.-11.11.2011, 2011","short":"B. Becker, in: GDL-Forum in Verbindung mit der EFFoST Annual Conference \"Process-Structure-Functions-Relationships”, Berlin, 09.-11.11.2011, 2011.","chicago":"Becker, Barbara. “Bedeutung von Viren in der Lebensmittelproduktion.” In GDL-Forum in Verbindung mit der EFFoST Annual Conference \"Process-Structure-Functions-Relationships”, Berlin, 09.-11.11.2011, 2011.","apa":"Becker, B. (2011). Bedeutung von Viren in der Lebensmittelproduktion. GDL-Forum in Verbindung mit der EFFoST Annual Conference \"Process-Structure-Functions-Relationships”, Berlin, 09.-11.11.2011. GDL-Forum in Verbindung mit der EFFoST Annual Conference \"Process-Structure-Functions-Relationships”, Berlin.","ufg":"Becker, Barbara: Bedeutung von Viren in der Lebensmittelproduktion, in: o. Hg.: GDL-Forum in Verbindung mit der EFFoST Annual Conference \"Process-Structure-Functions-Relationships”, Berlin, 09.-11.11.2011, o. O. 2011.","mla":"Becker, Barbara. “Bedeutung von Viren in der Lebensmittelproduktion.” GDL-Forum in Verbindung mit der EFFoST Annual Conference \"Process-Structure-Functions-Relationships”, Berlin, 09.-11.11.2011, 2011.","havard":"B. Becker, Bedeutung von Viren in der Lebensmittelproduktion, in: GDL-Forum in Verbindung mit der EFFoST Annual Conference \"Process-Structure-Functions-Relationships”, Berlin, 09.-11.11.2011, 2011.","bjps":"Becker B (2011) Bedeutung von Viren in der Lebensmittelproduktion. GDL-Forum in Verbindung mit der EFFoST Annual Conference \"Process-Structure-Functions-Relationships”, Berlin, 09.-11.11.2011.","van":"Becker B. Bedeutung von Viren in der Lebensmittelproduktion. In: GDL-Forum in Verbindung mit der EFFoST Annual Conference \"Process-Structure-Functions-Relationships”, Berlin, 09-11112011. 2011."},"conference":{"location":"Berlin","name":"GDL-Forum in Verbindung mit der EFFoST Annual Conference \"Process-Structure-Functions-Relationships”","end_date":"2011-11-11","start_date":"2011-11-09"},"department":[{"_id":"DEP4023"},{"_id":"DEP4026"}],"author":[{"full_name":"Becker, Barbara","id":"12640","first_name":"Barbara","last_name":"Becker"}],"year":"2011","status":"public","date_created":"2021-04-07T13:30:53Z","type":"conference","publication":"GDL-Forum in Verbindung mit der EFFoST Annual Conference \"Process-Structure-Functions-Relationships”, Berlin, 09.-11.11.2011","date_updated":"2024-04-29T10:17:40Z","user_id":"83778","language":[{"iso":"ger"}],"_id":"5413"},{"status":"public","year":2011,"author":[{"full_name":"Müller, Ulrich","id":"12119","last_name":"Müller","first_name":"Ulrich"},{"id":"12864","last_name":"Pliske","full_name":"Pliske, Roland","first_name":"Roland"}],"conference":{"start_date":"2011-11-15","end_date":"2011-11-16","location":"Paderborn","name":"5. Paderborner Mischtechnik-Symposium des VDI-BV Ostwestfalen-Lippe"},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"citation":{"bjps":"Müller U and Pliske R (2011) Dynamische Gefriertrocknung in Feststoffmischern.","havard":"U. Müller, R. Pliske, Dynamische Gefriertrocknung in Feststoffmischern, in: 2011.","mla":"Müller, Ulrich, and Roland Pliske. Dynamische Gefriertrocknung in Feststoffmischern. 2011.","ufg":"Müller, Ulrich/Pliske, Roland (2011): Dynamische Gefriertrocknung in Feststoffmischern, in: .","van":"Müller U, Pliske R. Dynamische Gefriertrocknung in Feststoffmischern. In 2011.","chicago":"Müller, Ulrich, and Roland Pliske. “Dynamische Gefriertrocknung in Feststoffmischern,” 2011.","apa":"Müller, U., & Pliske, R. (2011). Dynamische Gefriertrocknung in Feststoffmischern. Presented at the 5. Paderborner Mischtechnik-Symposium des VDI-BV Ostwestfalen-Lippe, Paderborn.","din1505-2-1":"Müller, Ulrich ; Pliske, Roland: Dynamische Gefriertrocknung in Feststoffmischern. In: , 2011","chicago-de":"Müller, Ulrich und Roland Pliske. 2011. Dynamische Gefriertrocknung in Feststoffmischern. In: .","short":"U. Müller, R. Pliske, in: 2011.","ama":"Müller U, Pliske R. Dynamische Gefriertrocknung in Feststoffmischern. In: ; 2011.","ieee":"U. Müller and R. Pliske, “Dynamische Gefriertrocknung in Feststoffmischern,” presented at the 5. Paderborner Mischtechnik-Symposium des VDI-BV Ostwestfalen-Lippe, Paderborn, 2011."},"publication_status":"published","title":"Dynamische Gefriertrocknung in Feststoffmischern","language":[{"iso":"ger"}],"_id":"5414","user_id":"45673","date_updated":"2023-03-15T13:49:59Z","type":"conference_abstract","date_created":"2021-04-07T13:33:29Z"},{"citation":{"chicago-de":"Schneider, Jan, Knut Schwarzer, Anna Dammann_, Ulrich Müller und M. Voetz. 2011. Ressourcen schonende Bierpasteurisation. In: .","din1505-2-1":"Schneider, Jan ; Schwarzer, Knut ; Dammann_, Anna ; Müller, Ulrich ; Voetz, M.: Ressourcen schonende Bierpasteurisation. In: , 2011","short":"J. Schneider, K. Schwarzer, A. Dammann_, U. Müller, M. Voetz, in: 2011.","chicago":"Schneider, Jan, Knut Schwarzer, Anna Dammann_, Ulrich Müller, and M. Voetz. “Ressourcen schonende Bierpasteurisation,” 2011.","apa":"Schneider, J., Schwarzer, K., Dammann_, A., Müller, U., & Voetz, M. (2011). Ressourcen schonende Bierpasteurisation. Technischer Ausschuss des Deutschen Brauerbundes, Berlin.","ufg":"Schneider, Jan u. a.: Ressourcen schonende Bierpasteurisation, in: o. Hg.: o. O. 2011.","havard":"J. Schneider, K. Schwarzer, A. Dammann_, U. Müller, M. Voetz, Ressourcen schonende Bierpasteurisation, in: 2011.","bjps":"Schneider J et al. (2011) Ressourcen schonende Bierpasteurisation.","mla":"Schneider, Jan, et al. Ressourcen schonende Bierpasteurisation. 2011.","van":"Schneider J, Schwarzer K, Dammann_ A, Müller U, Voetz M. Ressourcen schonende Bierpasteurisation. In 2011.","ieee":"J. Schneider, K. Schwarzer, A. Dammann_, U. Müller, and M. Voetz, “Ressourcen schonende Bierpasteurisation,” presented at the Technischer Ausschuss des Deutschen Brauerbundes, Berlin, 2011.","ama":"Schneider J, Schwarzer K, Dammann_ A, Müller U, Voetz M. Ressourcen schonende Bierpasteurisation. In: ; 2011."},"publication_status":"published","title":"Ressourcen schonende Bierpasteurisation","status":"public","author":[{"last_name":"Schneider","id":"13209","full_name":"Schneider, Jan","first_name":"Jan","orcid":"0000-0001-6401-8873"},{"id":"13329","last_name":"Schwarzer","full_name":"Schwarzer, Knut","first_name":"Knut"},{"last_name":"Dammann_","first_name":"Anna","full_name":"Dammann_, Anna","id":"43899"},{"first_name":"Ulrich","full_name":"Müller, Ulrich","id":"12119","last_name":"Müller"},{"first_name":"M.","full_name":"Voetz, M.","last_name":"Voetz"}],"year":"2011","conference":{"location":"Berlin","name":"Technischer Ausschuss des Deutschen Brauerbundes","start_date":"2011-12-02","end_date":"2011-12-02"},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"},{"_id":"DEP4018"}],"user_id":"83779","date_updated":"2024-05-24T07:25:00Z","date_created":"2021-04-07T13:38:19Z","type":"conference_abstract","language":[{"iso":"ger"}],"_id":"5415"},{"title":"Experience with Rapid Microbiological Methods in Food Testing","publication_status":"published","citation":{"ufg":"Becker, Barbara: Experience with Rapid Microbiological Methods in Food Testing, in: o. Hg.: Rapid Microbiological Methods Conference, Berlin, 07./08.12.2011, o. O. 2011.","havard":"B. Becker, Experience with Rapid Microbiological Methods in Food Testing, in: Rapid Microbiological Methods Conference, Berlin, 07./08.12.2011, 2011.","bjps":"Becker B (2011) Experience with Rapid Microbiological Methods in Food Testing. Rapid Microbiological Methods Conference, Berlin, 07./08.12.2011.","mla":"Becker, Barbara. “Experience with Rapid Microbiological Methods in Food Testing.” Rapid Microbiological Methods Conference, Berlin, 07./08.12.2011, 2011.","van":"Becker B. Experience with Rapid Microbiological Methods in Food Testing. In: Rapid Microbiological Methods Conference, Berlin, 07/08122011. 2011.","chicago":"Becker, Barbara. “Experience with Rapid Microbiological Methods in Food Testing.” In Rapid Microbiological Methods Conference, Berlin, 07./08.12.2011, 2011.","apa":"Becker, B. (2011). Experience with Rapid Microbiological Methods in Food Testing. Rapid Microbiological Methods Conference, Berlin, 07./08.12.2011. Rapid Microbiological Methods Conference, Berlin.","chicago-de":"Becker, Barbara. 2011. Experience with Rapid Microbiological Methods in Food Testing. In: Rapid Microbiological Methods Conference, Berlin, 07./08.12.2011.","din1505-2-1":"Becker, Barbara: Experience with Rapid Microbiological Methods in Food Testing. In: Rapid Microbiological Methods Conference, Berlin, 07./08.12.2011, 2011","short":"B. Becker, in: Rapid Microbiological Methods Conference, Berlin, 07./08.12.2011, 2011.","ama":"Becker B. Experience with Rapid Microbiological Methods in Food Testing. In: Rapid Microbiological Methods Conference, Berlin, 07./08.12.2011. ; 2011.","ieee":"B. Becker, “Experience with Rapid Microbiological Methods in Food Testing,” presented at the Rapid Microbiological Methods Conference, Berlin, 2011."},"conference":{"start_date":"2011-12-07","end_date":"2011-012-08","name":"Rapid Microbiological Methods Conference","location":"Berlin"},"department":[{"_id":"DEP4023"},{"_id":"DEP4026"}],"year":"2011","author":[{"id":"12640","full_name":"Becker, Barbara","last_name":"Becker","first_name":"Barbara"}],"status":"public","type":"conference","date_created":"2021-04-07T13:40:46Z","publication":"Rapid Microbiological Methods Conference, Berlin, 07./08.12.2011","date_updated":"2024-04-29T10:17:52Z","user_id":"83778","_id":"5416","language":[{"iso":"ger"}]},{"type":"conference_abstract","date_created":"2021-04-07T13:43:15Z","publication":"8. Lemgoer Nachmittag zu Entkeimungsfragen, Hochschule Ostwestfalen-Lippe, Lemgo, 09.12.2011","date_updated":"2023-03-15T13:49:59Z","user_id":"15514","_id":"5417","language":[{"iso":"ger"}],"title":"Tandem-Vortrag: \"Luftsterilfiltration\"(\"Grundlagen Luftfiltern\", \"Die Qualität der Umgebungsluft nach der Filtration der Außenluft bis zum Einlass\")","publication_status":"published","citation":{"chicago-de":"Müller, Ulrich und H. Wilkens. 2011. Tandem-Vortrag: „Luftsterilfiltration“(„Grundlagen Luftfiltern“, „Die Qualität der Umgebungsluft nach der Filtration der Außenluft bis zum Einlass“). In: 8. Lemgoer Nachmittag zu Entkeimungsfragen, Hochschule Ostwestfalen-Lippe, Lemgo, 09.12.2011.","din1505-2-1":"Müller, Ulrich ; Wilkens, H.: Tandem-Vortrag: „Luftsterilfiltration“(„Grundlagen Luftfiltern“, „Die Qualität der Umgebungsluft nach der Filtration der Außenluft bis zum Einlass“). In: 8. Lemgoer Nachmittag zu Entkeimungsfragen, Hochschule Ostwestfalen-Lippe, Lemgo, 09.12.2011, 2011","short":"U. Müller, H. Wilkens, in: 8. Lemgoer Nachmittag zu Entkeimungsfragen, Hochschule Ostwestfalen-Lippe, Lemgo, 09.12.2011, 2011.","ufg":"Müller, Ulrich/Wilkens, H. (2011): Tandem-Vortrag: „Luftsterilfiltration“(„Grundlagen Luftfiltern“, „Die Qualität der Umgebungsluft nach der Filtration der Außenluft bis zum Einlass“), in: 8. Lemgoer Nachmittag zu Entkeimungsfragen, Hochschule Ostwestfalen-Lippe, Lemgo, 09.12.2011.","havard":"U. Müller, H. Wilkens, Tandem-Vortrag: “Luftsterilfiltration”(“Grundlagen Luftfiltern”, “Die Qualität der Umgebungsluft nach der Filtration der Außenluft bis zum Einlass”), in: 8. Lemgoer Nachmittag zu Entkeimungsfragen, Hochschule Ostwestfalen-Lippe, Lemgo, 09.12.2011, 2011.","bjps":"Müller U and Wilkens H (2011) Tandem-Vortrag: ‘Luftsterilfiltration’(‘Grundlagen Luftfiltern’, ‘Die Qualität der Umgebungsluft nach der Filtration der Außenluft bis zum Einlass’). 8. Lemgoer Nachmittag zu Entkeimungsfragen, Hochschule Ostwestfalen-Lippe, Lemgo, 09.12.2011.","mla":"Müller, Ulrich, and H. Wilkens. “Tandem-Vortrag: ‘Luftsterilfiltration’(‘Grundlagen Luftfiltern’, ‘Die Qualität der Umgebungsluft nach der Filtration der Außenluft bis zum Einlass’).” 8. Lemgoer Nachmittag zu Entkeimungsfragen, Hochschule Ostwestfalen-Lippe, Lemgo, 09.12.2011, 2011.","van":"Müller U, Wilkens H. Tandem-Vortrag: “Luftsterilfiltration”(“Grundlagen Luftfiltern”, “Die Qualität der Umgebungsluft nach der Filtration der Außenluft bis zum Einlass”). In: 8 Lemgoer Nachmittag zu Entkeimungsfragen, Hochschule Ostwestfalen-Lippe, Lemgo, 09122011. 2011.","chicago":"Müller, Ulrich, and H. Wilkens. “Tandem-Vortrag: ‘Luftsterilfiltration’(‘Grundlagen Luftfiltern’, ‘Die Qualität der Umgebungsluft nach der Filtration der Außenluft bis zum Einlass’).” In 8. Lemgoer Nachmittag zu Entkeimungsfragen, Hochschule Ostwestfalen-Lippe, Lemgo, 09.12.2011, 2011.","apa":"Müller, U., & Wilkens, H. (2011). Tandem-Vortrag: “Luftsterilfiltration”(“Grundlagen Luftfiltern”, “Die Qualität der Umgebungsluft nach der Filtration der Außenluft bis zum Einlass”). In 8. Lemgoer Nachmittag zu Entkeimungsfragen, Hochschule Ostwestfalen-Lippe, Lemgo, 09.12.2011. Lemgo.","ama":"Müller U, Wilkens H. Tandem-Vortrag: “Luftsterilfiltration”(“Grundlagen Luftfiltern”, “Die Qualität der Umgebungsluft nach der Filtration der Außenluft bis zum Einlass”). In: 8. Lemgoer Nachmittag zu Entkeimungsfragen, Hochschule Ostwestfalen-Lippe, Lemgo, 09.12.2011. ; 2011.","ieee":"U. Müller and H. Wilkens, “Tandem-Vortrag: ‘Luftsterilfiltration’(‘Grundlagen Luftfiltern’, ‘Die Qualität der Umgebungsluft nach der Filtration der Außenluft bis zum Einlass’),” in 8. Lemgoer Nachmittag zu Entkeimungsfragen, Hochschule Ostwestfalen-Lippe, Lemgo, 09.12.2011, Lemgo, 2011."},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"conference":{"location":"Lemgo","name":"8. Lemgoer Nachmittag zu Entkeimungsfragen","start_date":"2011-12-09"},"author":[{"last_name":"Müller","id":"12119","first_name":"Ulrich","full_name":"Müller, Ulrich"},{"last_name":"Wilkens","first_name":"H.","full_name":"Wilkens, H."}],"year":2011,"status":"public"},{"citation":{"apa":"Lohweg, V., & Schaede, J. (2010). Document Production and Verification by Optimization of Feature Platform Exploitation. In Optical Document Security - The Conference on Optical Security and Counterfeit Detection, San Francisco, CA, USA, January 20-22, 2010.","chicago":"Lohweg, Volker, and Johannes Schaede. “Document Production and Verification by Optimization of Feature Platform Exploitation.” In Optical Document Security - The Conference on Optical Security and Counterfeit Detection, San Francisco, CA, USA, January 20-22, 2010, 2010.","van":"Lohweg V, Schaede J. Document Production and Verification by Optimization of Feature Platform Exploitation. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection, San Francisco, CA, USA, January 20-22, 2010. 2010.","ufg":"Lohweg, Volker/Schaede, Johannes (2010): Document Production and Verification by Optimization of Feature Platform Exploitation, in: Optical Document Security - The Conference on Optical Security and Counterfeit Detection, San Francisco, CA, USA, January 20-22, 2010.","bjps":"Lohweg V and Schaede J (2010) Document Production and Verification by Optimization of Feature Platform Exploitation. Optical Document Security - The Conference on Optical Security and Counterfeit Detection, San Francisco, CA, USA, January 20-22, 2010.","havard":"V. Lohweg, J. Schaede, Document Production and Verification by Optimization of Feature Platform Exploitation, in: Optical Document Security - The Conference on Optical Security and Counterfeit Detection, San Francisco, CA, USA, January 20-22, 2010, 2010.","mla":"Lohweg, Volker, and Johannes Schaede. “Document Production and Verification by Optimization of Feature Platform Exploitation.” Optical Document Security - The Conference on Optical Security and Counterfeit Detection, San Francisco, CA, USA, January 20-22, 2010, 2010.","short":"V. Lohweg, J. Schaede, in: Optical Document Security - The Conference on Optical Security and Counterfeit Detection, San Francisco, CA, USA, January 20-22, 2010, 2010.","din1505-2-1":"Lohweg, Volker ; Schaede, Johannes: Document Production and Verification by Optimization of Feature Platform Exploitation. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection, San Francisco, CA, USA, January 20-22, 2010, 2010","chicago-de":"Lohweg, Volker und Johannes Schaede. 2010. Document Production and Verification by Optimization of Feature Platform Exploitation. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection, San Francisco, CA, USA, January 20-22, 2010.","ieee":"V. Lohweg and J. Schaede, “Document Production and Verification by Optimization of Feature Platform Exploitation,” in Optical Document Security - The Conference on Optical Security and Counterfeit Detection, San Francisco, CA, USA, January 20-22, 2010, 2010.","ama":"Lohweg V, Schaede J. Document Production and Verification by Optimization of Feature Platform Exploitation. In: Optical Document Security - The Conference on Optical Security and Counterfeit Detection, San Francisco, CA, USA, January 20-22, 2010. ; 2010."},"title":"Document Production and Verification by Optimization of Feature Platform Exploitation","status":"public","department":[{"_id":"DEP5023"}],"author":[{"orcid":"0000-0002-3325-7887","last_name":"Lohweg","first_name":"Volker","full_name":"Lohweg, Volker","id":"1804"},{"last_name":"Schaede","first_name":"Johannes","id":"2128","full_name":"Schaede, Johannes"}],"year":2010,"date_updated":"2023-03-15T13:49:38Z","user_id":"45673","type":"conference","date_created":"2019-12-02T08:01:27Z","publication":"Optical Document Security - The Conference on Optical Security and Counterfeit Detection, San Francisco, CA, USA, January 20-22, 2010","language":[{"iso":"eng"}],"_id":"2084"},{"language":[{"iso":"eng"}],"_id":"2085","user_id":"45673","date_updated":"2023-03-15T13:49:38Z","publication":"2. inIT KBA-Giori International Workshop on \"Detection of Banknote Forgeries\"","type":"conference","date_created":"2019-12-02T08:03:04Z","status":"public","publisher":"Orell Füssli, Zürich, 22-24 March 2010","author":[{"last_name":"Lohweg","id":"1804","first_name":"Volker","full_name":"Lohweg, Volker","orcid":"0000-0002-3325-7887"},{"full_name":"Gillich, Eugen","id":"1706","first_name":"Eugen","last_name":"Gillich"},{"last_name":"Glock","first_name":"Stefan","full_name":"Glock, Stefan","id":"44020"},{"id":"1825","full_name":"Mönks, Uwe","last_name":"Mönks","first_name":"Uwe"},{"last_name":"Schaede","first_name":"Johannes","id":"2128","full_name":"Schaede, Johannes"}],"year":2010,"department":[{"_id":"DEP5023"}],"citation":{"ama":"Lohweg V, Gillich E, Glock S, Mönks U, Schaede J. Intaglio Based Banknote Authentication. In: 2. InIT KBA-Giori International Workshop on “Detection of Banknote Forgeries.” Orell Füssli, Zürich, 22-24 March 2010; 2010.","ieee":"V. Lohweg, E. Gillich, S. Glock, U. Mönks, and J. Schaede, “Intaglio Based Banknote Authentication,” in 2. inIT KBA-Giori International Workshop on “Detection of Banknote Forgeries,” 2010.","short":"V. Lohweg, E. Gillich, S. Glock, U. Mönks, J. Schaede, in: 2. InIT KBA-Giori International Workshop on “Detection of Banknote Forgeries,” Orell Füssli, Zürich, 22-24 March 2010, 2010.","chicago-de":"Lohweg, Volker, Eugen Gillich, Stefan Glock, Uwe Mönks und Johannes Schaede. 2010. Intaglio Based Banknote Authentication. In: 2. inIT KBA-Giori International Workshop on „Detection of Banknote Forgeries“. Orell Füssli, Zürich, 22-24 March 2010.","din1505-2-1":"Lohweg, Volker ; Gillich, Eugen ; Glock, Stefan ; Mönks, Uwe ; Schaede, Johannes: Intaglio Based Banknote Authentication. In: 2. inIT KBA-Giori International Workshop on „Detection of Banknote Forgeries“ : Orell Füssli, Zürich, 22-24 March 2010, 2010","van":"Lohweg V, Gillich E, Glock S, Mönks U, Schaede J. Intaglio Based Banknote Authentication. In: 2 inIT KBA-Giori International Workshop on “Detection of Banknote Forgeries.” Orell Füssli, Zürich, 22-24 March 2010; 2010.","ufg":"Lohweg, Volker et. al. (2010): Intaglio Based Banknote Authentication, in: 2. inIT KBA-Giori International Workshop on „Detection of Banknote Forgeries“.","havard":"V. Lohweg, E. Gillich, S. Glock, U. Mönks, J. Schaede, Intaglio Based Banknote Authentication, in: 2. InIT KBA-Giori International Workshop on “Detection of Banknote Forgeries,” Orell Füssli, Zürich, 22-24 March 2010, 2010.","mla":"Lohweg, Volker, et al. “Intaglio Based Banknote Authentication.” 2. InIT KBA-Giori International Workshop on “Detection of Banknote Forgeries,” Orell Füssli, Zürich, 22-24 March 2010, 2010.","bjps":"Lohweg V et al. (2010) Intaglio Based Banknote Authentication. 2. InIT KBA-Giori International Workshop on ‘Detection of Banknote Forgeries’. Orell Füssli, Zürich, 22-24 March 2010.","apa":"Lohweg, V., Gillich, E., Glock, S., Mönks, U., & Schaede, J. (2010). Intaglio Based Banknote Authentication. In 2. inIT KBA-Giori International Workshop on “Detection of Banknote Forgeries.” Orell Füssli, Zürich, 22-24 March 2010.","chicago":"Lohweg, Volker, Eugen Gillich, Stefan Glock, Uwe Mönks, and Johannes Schaede. “Intaglio Based Banknote Authentication.” In 2. InIT KBA-Giori International Workshop on “Detection of Banknote Forgeries.” Orell Füssli, Zürich, 22-24 March 2010, 2010."},"title":"Intaglio Based Banknote Authentication"},{"date_updated":"2023-03-15T13:49:38Z","user_id":"45673","date_created":"2019-12-02T08:04:18Z","type":"conference","publication":"The 2nd International Workshop on Cognitive Information Processing","publication_identifier":{"eisbn":["978-1-4244-6459-3"],"issn":["2327-1671 "],"unknown":["2327-1698 "],"isbn":["978-1-4244-6457-9"]},"doi":"10.1109/CIP.2010.5604094","_id":"2086","language":[{"iso":"eng"}],"keyword":["Noise measurement","Fuzzy sets","Noise","Sensor fusion","Logic gates","Feature extraction","Fuses"],"publication_status":"published","citation":{"ama":"Lohweg V, Mönks U. Sensor Fusion by Two-Layer Conflict Solving. In: The 2nd International Workshop on Cognitive Information Processing. 14-16 June, 2010, Elba Island (Tuscany), Italy; 2010. doi:10.1109/CIP.2010.5604094","ieee":"V. Lohweg and U. Mönks, “Sensor Fusion by Two-Layer Conflict Solving,” in The 2nd International Workshop on Cognitive Information Processing, Elba, 2010.","short":"V. Lohweg, U. Mönks, in: The 2nd International Workshop on Cognitive Information Processing, 14-16 June, 2010, Elba Island (Tuscany), Italy, 2010.","din1505-2-1":"Lohweg, Volker ; Mönks, Uwe: Sensor Fusion by Two-Layer Conflict Solving. In: The 2nd International Workshop on Cognitive Information Processing : 14-16 June, 2010, Elba Island (Tuscany), Italy, 2010","chicago-de":"Lohweg, Volker und Uwe Mönks. 2010. Sensor Fusion by Two-Layer Conflict Solving. In: The 2nd International Workshop on Cognitive Information Processing. 14-16 June, 2010, Elba Island (Tuscany), Italy. doi:10.1109/CIP.2010.5604094, .","van":"Lohweg V, Mönks U. Sensor Fusion by Two-Layer Conflict Solving. In: The 2nd International Workshop on Cognitive Information Processing. 14-16 June, 2010, Elba Island (Tuscany), Italy; 2010.","ufg":"Lohweg, Volker/Mönks, Uwe (2010): Sensor Fusion by Two-Layer Conflict Solving, in: The 2nd International Workshop on Cognitive Information Processing.","havard":"V. Lohweg, U. Mönks, Sensor Fusion by Two-Layer Conflict Solving, in: The 2nd International Workshop on Cognitive Information Processing, 14-16 June, 2010, Elba Island (Tuscany), Italy, 2010.","bjps":"Lohweg V and Mönks U (2010) Sensor Fusion by Two-Layer Conflict Solving. The 2nd International Workshop on Cognitive Information Processing. 14-16 June, 2010, Elba Island (Tuscany), Italy.","mla":"Lohweg, Volker, and Uwe Mönks. “Sensor Fusion by Two-Layer Conflict Solving.” The 2nd International Workshop on Cognitive Information Processing, 14-16 June, 2010, Elba Island (Tuscany), Italy, 2010, doi:10.1109/CIP.2010.5604094.","apa":"Lohweg, V., & Mönks, U. (2010). Sensor Fusion by Two-Layer Conflict Solving. In The 2nd International Workshop on Cognitive Information Processing. Elba: 14-16 June, 2010, Elba Island (Tuscany), Italy. https://doi.org/10.1109/CIP.2010.5604094","chicago":"Lohweg, Volker, and Uwe Mönks. “Sensor Fusion by Two-Layer Conflict Solving.” In The 2nd International Workshop on Cognitive Information Processing. 14-16 June, 2010, Elba Island (Tuscany), Italy, 2010. https://doi.org/10.1109/CIP.2010.5604094."},"title":"Sensor Fusion by Two-Layer Conflict Solving","publisher":"14-16 June, 2010, Elba Island (Tuscany), Italy","status":"public","abstract":[{"text":"Many of the existing fusion approaches based on Dempster-Shafer Theory (DST) tend to be unreliable in various scenarios. Therefore, this topic is still in discussion. In this work a Two-Layer Conflict Solving (TLCS) data fusion scheme is proposed which is based on Dempster-Shafer Theory and on Fuzzy-Pattern-Classification (FPC) concepts. The aim is to provide an approach to data fusion which provides a stable conflict scenario handling. Furthermore, the scheme can easily be extended to fuzzy classification and is applicable to sensor fusion applications. Therefore, the suggested approach will contribute as a novel fuzzy fusion method.","lang":"eng"}],"department":[{"_id":"DEP5023"}],"conference":{"start_date":"2010-06-14","end_date":"2010-06-16","name":" 2010 2nd International Workshop on Cognitive Information Processing","location":"Elba"},"author":[{"full_name":"Lohweg, Volker","first_name":"Volker","id":"1804","last_name":"Lohweg","orcid":"0000-0002-3325-7887"},{"full_name":"Mönks, Uwe","last_name":"Mönks","id":"1825","first_name":"Uwe"}],"year":2010},{"publication":"IPMU 2010 - International Conference on Information Processing and Management of Uncertainty in Knowledge Based Systems","date_created":"2019-12-02T08:15:18Z","type":"conference","user_id":"45673","date_updated":"2023-03-15T13:49:38Z","oa":"1","_id":"2087","keyword":["Fuzzy Logic","Probability Theory","Fuzzy-Pattern-Classification","Machine Learning","Artificial Intelligence","Pattern Recognition"],"language":[{"iso":"eng"}],"title":"Fuzzy-Pattern-Classifier Training with Small Data Sets","citation":{"chicago-de":"Mönks, Uwe, Volker Lohweg und Denis Petker. 2010. Fuzzy-Pattern-Classifier Training with Small Data Sets. In: IPMU 2010 - International Conference on Information Processing and Management of Uncertainty in Knowledge Based Systems. 28 Jun 2010 - 02 July 2010, Dortmund, Germany.","din1505-2-1":"Mönks, Uwe ; Lohweg, Volker ; Petker, Denis: Fuzzy-Pattern-Classifier Training with Small Data Sets. In: IPMU 2010 - International Conference on Information Processing and Management of Uncertainty in Knowledge Based Systems : 28 Jun 2010 - 02 July 2010, Dortmund, Germany, 2010","short":"U. Mönks, V. Lohweg, D. Petker, in: IPMU 2010 - International Conference on Information Processing and Management of Uncertainty in Knowledge Based Systems, 28 Jun 2010 - 02 July 2010, Dortmund, Germany, 2010.","chicago":"Mönks, Uwe, Volker Lohweg, and Denis Petker. “Fuzzy-Pattern-Classifier Training with Small Data Sets.” In IPMU 2010 - International Conference on Information Processing and Management of Uncertainty in Knowledge Based Systems. 28 Jun 2010 - 02 July 2010, Dortmund, Germany, 2010.","apa":"Mönks, U., Lohweg, V., & Petker, D. (2010). Fuzzy-Pattern-Classifier Training with Small Data Sets. In IPMU 2010 - International Conference on Information Processing and Management of Uncertainty in Knowledge Based Systems. 28 Jun 2010 - 02 July 2010, Dortmund, Germany.","ufg":"Mönks, Uwe et. al. (2010): Fuzzy-Pattern-Classifier Training with Small Data Sets, in: IPMU 2010 - International Conference on Information Processing and Management of Uncertainty in Knowledge Based Systems.","mla":"Mönks, Uwe, et al. “Fuzzy-Pattern-Classifier Training with Small Data Sets.” IPMU 2010 - International Conference on Information Processing and Management of Uncertainty in Knowledge Based Systems, 28 Jun 2010 - 02 July 2010, Dortmund, Germany, 2010.","bjps":"Mönks U, Lohweg V and Petker D (2010) Fuzzy-Pattern-Classifier Training with Small Data Sets. IPMU 2010 - International Conference on Information Processing and Management of Uncertainty in Knowledge Based Systems. 28 Jun 2010 - 02 July 2010, Dortmund, Germany.","havard":"U. Mönks, V. Lohweg, D. Petker, Fuzzy-Pattern-Classifier Training with Small Data Sets, in: IPMU 2010 - International Conference on Information Processing and Management of Uncertainty in Knowledge Based Systems, 28 Jun 2010 - 02 July 2010, Dortmund, Germany, 2010.","van":"Mönks U, Lohweg V, Petker D. Fuzzy-Pattern-Classifier Training with Small Data Sets. In: IPMU 2010 - International Conference on Information Processing and Management of Uncertainty in Knowledge Based Systems. 28 Jun 2010 - 02 July 2010, Dortmund, Germany; 2010.","ieee":"U. Mönks, V. Lohweg, and D. Petker, “Fuzzy-Pattern-Classifier Training with Small Data Sets,” in IPMU 2010 - International Conference on Information Processing and Management of Uncertainty in Knowledge Based Systems, 2010.","ama":"Mönks U, Lohweg V, Petker D. Fuzzy-Pattern-Classifier Training with Small Data Sets. In: IPMU 2010 - International Conference on Information Processing and Management of Uncertainty in Knowledge Based Systems. 28 Jun 2010 - 02 July 2010, Dortmund, Germany; 2010."},"publication_status":"published","abstract":[{"lang":"eng","text":"It is likely in real-world applications that only little data isavailable for training a knowledge-based system. We present a method forautomatically training the knowledge-representing membership functionsof a Fuzzy-Pattern-Classification system that works also when only littledata is available and the universal set is described insufficiently. Actually,this paper presents how the Modified-Fuzzy-Pattern-Classifier’s member-ship functions are trained using probability distribution functions."}],"main_file_link":[{"open_access":"1","url":"https://www.th-owl.de/init/uploads/tx_initdb/00800426_01.pdf"}],"year":2010,"author":[{"id":"1825","first_name":"Uwe","last_name":"Mönks","full_name":"Mönks, Uwe"},{"last_name":"Lohweg","first_name":"Volker","full_name":"Lohweg, Volker","id":"1804","orcid":"0000-0002-3325-7887"},{"first_name":"Denis","last_name":"Petker","full_name":"Petker, Denis"}],"department":[{"_id":"DEP5023"}],"publisher":"28 Jun 2010 - 02 July 2010, Dortmund, Germany","status":"public"},{"place":"Berlin","doi":"https://doi.org/10.1007/978-3-642-16111-7_21","_id":"2088","user_id":"45673","intvolume":" 6359","type":"conference","publisher":"Springer","department":[{"_id":"DEP5023"}],"abstract":[{"lang":"eng","text":"Clustering remains a major topic in machine learning; it is used e.g. for document categorization, for data mining, and for image analysis. In all these application areas, clustering algorithms try to identify groups of related data in large data sets.\r\n\r\nIn this paper, the established clustering algorithm MajorClust ([12]) is improved; making it applicable to data sets with few structure on the local scale—so called near-homogeneous graphs. This new algorithm MCProb is verified empirically using the problem of image clustering. Furthermore, MCProb is analyzed theoretically. For the applications examined so-far, MCProb outperforms other established clustering techniques."}],"publication_status":"published","series_title":"Lecture Notes in Computer Science","language":[{"iso":"eng"}],"keyword":["Markov Chain","Cluster Algorithm","Edge Weight","Spectral Cluster","Stable Distribution"],"date_updated":"2023-03-15T13:49:38Z","date_created":"2019-12-02T08:21:26Z","publication":"33rd Annual German Conference on Artificial Intelligence (KI 2010)","publication_identifier":{"eisbn":["978-3-642-16111-7"],"isbn":["978-3-642-16110-0"]},"page":"184-194","status":"public","year":2010,"author":[{"last_name":"Niggemann","first_name":"Oliver","id":"10876","full_name":"Niggemann, Oliver"},{"full_name":"Lohweg, Volker","first_name":"Volker","id":"1804","last_name":"Lohweg","orcid":"0000-0002-3325-7887"},{"full_name":"Tack, Tim","first_name":"Tim","last_name":"Tack"}],"main_file_link":[{"url":"https://link.springer.com/chapter/10.1007/978-3-642-16111-7_21"}],"volume":6359,"citation":{"short":"O. Niggemann, V. Lohweg, T. Tack, in: 33rd Annual German Conference on Artificial Intelligence (KI 2010), Springer, Berlin, 2010, pp. 184–194.","chicago-de":"Niggemann, Oliver, Volker Lohweg und Tim Tack. 2010. A Probabilistic MajorClust Variant for the Clustering of Near-Homogeneous Graphs. In: 33rd Annual German Conference on Artificial Intelligence (KI 2010), 6359:184–194. Lecture Notes in Computer Science. Berlin: Springer. doi:https://doi.org/10.1007/978-3-642-16111-7_21, .","din1505-2-1":"Niggemann, Oliver ; Lohweg, Volker ; Tack, Tim: A Probabilistic MajorClust Variant for the Clustering of Near-Homogeneous Graphs. In: 33rd Annual German Conference on Artificial Intelligence (KI 2010), Lecture Notes in Computer Science. Bd. 6359. Berlin : Springer, 2010, S. 184–194","apa":"Niggemann, O., Lohweg, V., & Tack, T. (2010). A Probabilistic MajorClust Variant for the Clustering of Near-Homogeneous Graphs. In 33rd Annual German Conference on Artificial Intelligence (KI 2010) (Vol. 6359, pp. 184–194). Berlin: Springer. https://doi.org/10.1007/978-3-642-16111-7_21","chicago":"Niggemann, Oliver, Volker Lohweg, and Tim Tack. “A Probabilistic MajorClust Variant for the Clustering of Near-Homogeneous Graphs.” In 33rd Annual German Conference on Artificial Intelligence (KI 2010), 6359:184–94. Lecture Notes in Computer Science. Berlin: Springer, 2010. https://doi.org/10.1007/978-3-642-16111-7_21.","van":"Niggemann O, Lohweg V, Tack T. A Probabilistic MajorClust Variant for the Clustering of Near-Homogeneous Graphs. In: 33rd Annual German Conference on Artificial Intelligence (KI 2010). Berlin: Springer; 2010. p. 184–94. (Lecture Notes in Computer Science; vol. 6359).","ufg":"Niggemann, Oliver et. al. (2010): A Probabilistic MajorClust Variant for the Clustering of Near-Homogeneous Graphs, in: 33rd Annual German Conference on Artificial Intelligence (KI 2010) (=Lecture Notes in Computer Science 6359), Berlin, S. 184–194.","bjps":"Niggemann O, Lohweg V and Tack T (2010) A Probabilistic MajorClust Variant for the Clustering of Near-Homogeneous Graphs. 33rd Annual German Conference on Artificial Intelligence (KI 2010), vol. 6359. Berlin: Springer, pp. 184–194.","mla":"Niggemann, Oliver, et al. “A Probabilistic MajorClust Variant for the Clustering of Near-Homogeneous Graphs.” 33rd Annual German Conference on Artificial Intelligence (KI 2010), vol. 6359, Springer, 2010, pp. 184–94, doi:https://doi.org/10.1007/978-3-642-16111-7_21.","havard":"O. Niggemann, V. Lohweg, T. Tack, A Probabilistic MajorClust Variant for the Clustering of Near-Homogeneous Graphs, in: 33rd Annual German Conference on Artificial Intelligence (KI 2010), Springer, Berlin, 2010: pp. 184–194.","ieee":"O. Niggemann, V. Lohweg, and T. Tack, “A Probabilistic MajorClust Variant for the Clustering of Near-Homogeneous Graphs,” in 33rd Annual German Conference on Artificial Intelligence (KI 2010), 2010, vol. 6359, pp. 184–194.","ama":"Niggemann O, Lohweg V, Tack T. A Probabilistic MajorClust Variant for the Clustering of Near-Homogeneous Graphs. In: 33rd Annual German Conference on Artificial Intelligence (KI 2010). Vol 6359. Lecture Notes in Computer Science. Berlin: Springer; 2010:184-194. doi:https://doi.org/10.1007/978-3-642-16111-7_21"},"title":"A Probabilistic MajorClust Variant for the Clustering of Near-Homogeneous Graphs"},{"date_created":"2019-12-02T08:40:40Z","type":"conference","publication":"Sensor Fusion ISBN 978-953-307-101-5 ed by Ciza Thomas","editor":[{"first_name":"Ciza","last_name":"Thomas (ed)","full_name":"Thomas (ed), Ciza"}],"date_updated":"2023-03-15T13:49:38Z","user_id":"45673","oa":"1","_id":"2089","language":[{"iso":"eng"}],"title":"Fuzzy-Pattern-Classifier based Sensor Fusion for Machine Conditioning","citation":{"chicago-de":"Lohweg, Volker und Uwe Mönks. 2010. Fuzzy-Pattern-Classifier based Sensor Fusion for Machine Conditioning. In: Sensor Fusion ISBN 978-953-307-101-5 ed by Ciza Thomas, hg. von Ciza Thomas (ed). SCIYO.","din1505-2-1":"Lohweg, Volker ; Mönks, Uwe: Fuzzy-Pattern-Classifier based Sensor Fusion for Machine Conditioning. In: Thomas (ed), C. (Hrsg.): Sensor Fusion ISBN 978-953-307-101-5 ed by Ciza Thomas : SCIYO, 2010","short":"V. Lohweg, U. Mönks, in: C. Thomas (ed) (Ed.), Sensor Fusion ISBN 978-953-307-101-5 Ed by Ciza Thomas, SCIYO, 2010.","chicago":"Lohweg, Volker, and Uwe Mönks. “Fuzzy-Pattern-Classifier Based Sensor Fusion for Machine Conditioning.” In Sensor Fusion ISBN 978-953-307-101-5 Ed by Ciza Thomas, edited by Ciza Thomas (ed). SCIYO, 2010.","ieee":"V. Lohweg and U. Mönks, “Fuzzy-Pattern-Classifier based Sensor Fusion for Machine Conditioning,” in Sensor Fusion ISBN 978-953-307-101-5 ed by Ciza Thomas, 2010.","apa":"Lohweg, V., & Mönks, U. (2010). Fuzzy-Pattern-Classifier based Sensor Fusion for Machine Conditioning. In C. Thomas (ed) (Ed.), Sensor Fusion ISBN 978-953-307-101-5 ed by Ciza Thomas. SCIYO.","bjps":"Lohweg V and Mönks U (2010) Fuzzy-Pattern-Classifier Based Sensor Fusion for Machine Conditioning. In Thomas (ed) C (ed.), Sensor Fusion ISBN 978-953-307-101-5 Ed by Ciza Thomas. SCIYO.","havard":"V. Lohweg, U. Mönks, Fuzzy-Pattern-Classifier based Sensor Fusion for Machine Conditioning, in: C. Thomas (ed) (Ed.), Sensor Fusion ISBN 978-953-307-101-5 Ed by Ciza Thomas, SCIYO, 2010.","mla":"Lohweg, Volker, and Uwe Mönks. “Fuzzy-Pattern-Classifier Based Sensor Fusion for Machine Conditioning.” Sensor Fusion ISBN 978-953-307-101-5 Ed by Ciza Thomas, edited by Ciza Thomas (ed), SCIYO, 2010.","ufg":"Lohweg, Volker/Mönks, Uwe (2010): Fuzzy-Pattern-Classifier based Sensor Fusion for Machine Conditioning, in: Ciza Thomas (ed) (Hg.): Sensor Fusion ISBN 978-953-307-101-5 ed by Ciza Thomas.","ama":"Lohweg V, Mönks U. Fuzzy-Pattern-Classifier based Sensor Fusion for Machine Conditioning. In: Thomas (ed) C, ed. Sensor Fusion ISBN 978-953-307-101-5 Ed by Ciza Thomas. SCIYO; 2010.","van":"Lohweg V, Mönks U. Fuzzy-Pattern-Classifier based Sensor Fusion for Machine Conditioning. In: Thomas (ed) C, editor. Sensor Fusion ISBN 978-953-307-101-5 ed by Ciza Thomas. SCIYO; 2010."},"department":[{"_id":"DEP5023"}],"year":2010,"author":[{"orcid":"0000-0002-3325-7887","last_name":"Lohweg","first_name":"Volker","id":"1804","full_name":"Lohweg, Volker"},{"first_name":"Uwe","full_name":"Mönks, Uwe","last_name":"Mönks","id":"1825"}],"main_file_link":[{"open_access":"1","url":"https://www.intechopen.com/books/sensor-fusion-and-its-applications/fuzzy-pattern-classifier-based-sensor-fusion-for-machine-conditioning"}],"publisher":"SCIYO","status":"public"},{"_id":"2090","language":[{"iso":"eng"}],"publication":"Fachforum Automatisierung für Technologie und Innovation „solutions“","type":"conference","date_created":"2019-12-02T09:46:55Z","user_id":"45673","date_updated":"2023-03-15T13:49:38Z","year":2010,"author":[{"last_name":"Lohweg","id":"1804","full_name":"Lohweg, Volker","first_name":"Volker","orcid":"0000-0002-3325-7887"}],"department":[{"_id":"DEP5023"}],"publisher":"Universität Paderborn","status":"public","title":"Wie Bild- und Maschineninformationen in Automatisierungssystemen des Maschinen- und Anlagenbaus verschmelzen, Bildverarbeitung-Quo Vadis?","citation":{"ama":"Lohweg V. Wie Bild- und Maschineninformationen in Automatisierungssystemen des Maschinen- und Anlagenbaus verschmelzen, Bildverarbeitung-Quo Vadis? In: Fachforum Automatisierung Für Technologie Und Innovation „solutions“. Universität Paderborn; 2010.","ieee":"V. Lohweg, “Wie Bild- und Maschineninformationen in Automatisierungssystemen des Maschinen- und Anlagenbaus verschmelzen, Bildverarbeitung-Quo Vadis?,” in Fachforum Automatisierung für Technologie und Innovation „solutions“, 2010.","chicago-de":"Lohweg, Volker. 2010. Wie Bild- und Maschineninformationen in Automatisierungssystemen des Maschinen- und Anlagenbaus verschmelzen, Bildverarbeitung-Quo Vadis? In: Fachforum Automatisierung für Technologie und Innovation „solutions“. Universität Paderborn.","din1505-2-1":"Lohweg, Volker: Wie Bild- und Maschineninformationen in Automatisierungssystemen des Maschinen- und Anlagenbaus verschmelzen, Bildverarbeitung-Quo Vadis? In: Fachforum Automatisierung für Technologie und Innovation „solutions“ : Universität Paderborn, 2010","short":"V. Lohweg, in: Fachforum Automatisierung Für Technologie Und Innovation „solutions“, Universität Paderborn, 2010.","havard":"V. Lohweg, Wie Bild- und Maschineninformationen in Automatisierungssystemen des Maschinen- und Anlagenbaus verschmelzen, Bildverarbeitung-Quo Vadis?, in: Fachforum Automatisierung Für Technologie Und Innovation „solutions“, Universität Paderborn, 2010.","bjps":"Lohweg V (2010) Wie Bild- Und Maschineninformationen in Automatisierungssystemen Des Maschinen- Und Anlagenbaus Verschmelzen, Bildverarbeitung-Quo Vadis? Fachforum Automatisierung Für Technologie Und Innovation „solutions“. Universität Paderborn.","mla":"Lohweg, Volker. “Wie Bild- Und Maschineninformationen in Automatisierungssystemen Des Maschinen- Und Anlagenbaus Verschmelzen, Bildverarbeitung-Quo Vadis?” Fachforum Automatisierung Für Technologie Und Innovation „solutions“, Universität Paderborn, 2010.","ufg":"Lohweg, Volker (2010): Wie Bild- und Maschineninformationen in Automatisierungssystemen des Maschinen- und Anlagenbaus verschmelzen, Bildverarbeitung-Quo Vadis?, in: Fachforum Automatisierung für Technologie und Innovation „solutions“.","van":"Lohweg V. Wie Bild- und Maschineninformationen in Automatisierungssystemen des Maschinen- und Anlagenbaus verschmelzen, Bildverarbeitung-Quo Vadis? In: Fachforum Automatisierung für Technologie und Innovation „solutions“. Universität Paderborn; 2010.","chicago":"Lohweg, Volker. “Wie Bild- Und Maschineninformationen in Automatisierungssystemen Des Maschinen- Und Anlagenbaus Verschmelzen, Bildverarbeitung-Quo Vadis?” In Fachforum Automatisierung Für Technologie Und Innovation „solutions“. Universität Paderborn, 2010.","apa":"Lohweg, V. (2010). Wie Bild- und Maschineninformationen in Automatisierungssystemen des Maschinen- und Anlagenbaus verschmelzen, Bildverarbeitung-Quo Vadis? In Fachforum Automatisierung für Technologie und Innovation „solutions“. Universität Paderborn."}},{"_id":"2091","language":[{"iso":"eng"}],"user_id":"45673","date_updated":"2023-03-15T13:49:38Z","publication":"Keesing Journal of Documents Identity","date_created":"2019-12-02T09:48:49Z","type":"conference","publisher":"Keesing Reference Systems Publ., Vol. 33","status":"public","page":"35-41","year":2010,"author":[{"id":"1804","first_name":"Volker","last_name":"Lohweg","full_name":"Lohweg, Volker","orcid":"0000-0002-3325-7887"}],"department":[{"_id":"DEP5023"}],"citation":{"ieee":"V. Lohweg, “Renaissance of Intaglio,” in Keesing Journal of Documents Identity, 2010, pp. 35–41.","ama":"Lohweg V. Renaissance of Intaglio. In: Keesing Journal of Documents Identity. Keesing Reference Systems Publ., Vol. 33; 2010:35-41.","chicago-de":"Lohweg, Volker. 2010. Renaissance of Intaglio. In: Keesing Journal of Documents Identity, 35–41. Keesing Reference Systems Publ., Vol. 33.","din1505-2-1":"Lohweg, Volker: Renaissance of Intaglio. In: Keesing Journal of Documents Identity : Keesing Reference Systems Publ., Vol. 33, 2010, S. 35–41","short":"V. Lohweg, in: Keesing Journal of Documents Identity, Keesing Reference Systems Publ., Vol. 33, 2010, pp. 35–41.","chicago":"Lohweg, Volker. “Renaissance of Intaglio.” In Keesing Journal of Documents Identity, 35–41. Keesing Reference Systems Publ., Vol. 33, 2010.","apa":"Lohweg, V. (2010). Renaissance of Intaglio. In Keesing Journal of Documents Identity (pp. 35–41). Keesing Reference Systems Publ., Vol. 33.","mla":"Lohweg, Volker. “Renaissance of Intaglio.” Keesing Journal of Documents Identity, Keesing Reference Systems Publ., Vol. 33, 2010, pp. 35–41.","havard":"V. Lohweg, Renaissance of Intaglio, in: Keesing Journal of Documents Identity, Keesing Reference Systems Publ., Vol. 33, 2010: pp. 35–41.","bjps":"Lohweg V (2010) Renaissance of Intaglio. Keesing Journal of Documents Identity. Keesing Reference Systems Publ., Vol. 33, pp. 35–41.","ufg":"Lohweg, Volker (2010): Renaissance of Intaglio, in: Keesing Journal of Documents Identity, S. 35–41.","van":"Lohweg V. Renaissance of Intaglio. In: Keesing Journal of Documents Identity. Keesing Reference Systems Publ., Vol. 33; 2010. p. 35–41."},"title":"Renaissance of Intaglio"},{"publication":"1. Fachkolloquium \"Bildverarbeitung in der Automation\"","publication_identifier":{"isbn":["978-3-9814062-0-7"]},"type":"conference","date_created":"2019-12-02T09:51:00Z","file_date_updated":"2019-12-02T09:51:52Z","user_id":"45673","date_updated":"2023-03-15T13:49:38Z","has_accepted_license":"1","_id":"2092","language":[{"iso":"eng"}],"title":"Surface Fingerprint Detection","citation":{"chicago":"Ehlenbröker, Jan-Friedrich, Uwe Mönks, and Volker Lohweg. “Surface Fingerprint Detection.” In 1. Fachkolloquium “Bildverarbeitung in Der Automation.” Centrum Industrial IT, Lemgo, 2010.","apa":"Ehlenbröker, J.-F., Mönks, U., & Lohweg, V. (2010). Surface Fingerprint Detection. In 1. Fachkolloquium “Bildverarbeitung in der Automation.” Centrum Industrial IT, Lemgo.","ufg":"Ehlenbröker, Jan-Friedrich et. al. (2010): Surface Fingerprint Detection, in: 1. Fachkolloquium „Bildverarbeitung in der Automation“.","havard":"J.-F. Ehlenbröker, U. Mönks, V. Lohweg, Surface Fingerprint Detection, in: 1. Fachkolloquium “Bildverarbeitung in Der Automation,” Centrum Industrial IT, Lemgo, 2010.","bjps":"Ehlenbröker J-F, Mönks U and Lohweg V (2010) Surface Fingerprint Detection. 1. Fachkolloquium ‘Bildverarbeitung in Der Automation’. Centrum Industrial IT, Lemgo.","mla":"Ehlenbröker, Jan-Friedrich, et al. “Surface Fingerprint Detection.” 1. Fachkolloquium “Bildverarbeitung in Der Automation,” Centrum Industrial IT, Lemgo, 2010.","van":"Ehlenbröker J-F, Mönks U, Lohweg V. Surface Fingerprint Detection. In: 1 Fachkolloquium “Bildverarbeitung in der Automation.” Centrum Industrial IT, Lemgo; 2010.","chicago-de":"Ehlenbröker, Jan-Friedrich, Uwe Mönks und Volker Lohweg. 2010. Surface Fingerprint Detection. In: 1. Fachkolloquium „Bildverarbeitung in der Automation“. Centrum Industrial IT, Lemgo.","din1505-2-1":"Ehlenbröker, Jan-Friedrich ; Mönks, Uwe ; Lohweg, Volker: Surface Fingerprint Detection. In: 1. Fachkolloquium „Bildverarbeitung in der Automation“ : Centrum Industrial IT, Lemgo, 2010","short":"J.-F. Ehlenbröker, U. Mönks, V. Lohweg, in: 1. Fachkolloquium “Bildverarbeitung in Der Automation,” Centrum Industrial IT, Lemgo, 2010.","ieee":"J.-F. Ehlenbröker, U. Mönks, and V. Lohweg, “Surface Fingerprint Detection,” in 1. Fachkolloquium “Bildverarbeitung in der Automation,” 2010.","ama":"Ehlenbröker J-F, Mönks U, Lohweg V. Surface Fingerprint Detection. In: 1. Fachkolloquium “Bildverarbeitung in Der Automation.” Centrum Industrial IT, Lemgo; 2010."},"file":[{"access_level":"closed","file_name":"lohweg_surface.pdf","content_type":"application/pdf","date_created":"2019-12-02T09:51:52Z","file_size":179802,"file_id":"2093","date_updated":"2019-12-02T09:51:52Z","creator":"6bl-f5s","relation":"main_file"}],"ddc":["600"],"year":2010,"author":[{"first_name":"Jan-Friedrich","id":"1852","full_name":"Ehlenbröker, Jan-Friedrich","last_name":"Ehlenbröker"},{"full_name":"Mönks, Uwe","last_name":"Mönks","id":"1825","first_name":"Uwe"},{"orcid":"0000-0002-3325-7887","full_name":"Lohweg, Volker","id":"1804","first_name":"Volker","last_name":"Lohweg"}],"department":[{"_id":"DEP5023"}],"publisher":"Centrum Industrial IT, Lemgo","status":"public"},{"type":"conference","date_created":"2019-12-02T10:11:29Z","publication":"1. Jahresolloquium \"Bildverarbeitung in der Automation\"","date_updated":"2023-03-15T13:49:38Z","user_id":"45673","_id":"2094","language":[{"iso":"eng"}],"title":"Banknotenauthentifizierung","citation":{"ama":"Gillich E, Lohweg V. Banknotenauthentifizierung. In: 1. Jahresolloquium “Bildverarbeitung in Der Automation.” Centrum Industrial IT, Lemgo; 2010.","ieee":"E. Gillich and V. Lohweg, “Banknotenauthentifizierung,” in 1. Jahresolloquium “Bildverarbeitung in der Automation,” 2010.","ufg":"Gillich, Eugen/Lohweg, Volker (2010): Banknotenauthentifizierung, in: 1. Jahresolloquium „Bildverarbeitung in der Automation“.","bjps":"Gillich E and Lohweg V (2010) Banknotenauthentifizierung. 1. Jahresolloquium ‘Bildverarbeitung in Der Automation’. Centrum Industrial IT, Lemgo.","havard":"E. Gillich, V. Lohweg, Banknotenauthentifizierung, in: 1. Jahresolloquium “Bildverarbeitung in Der Automation,” Centrum Industrial IT, Lemgo, 2010.","mla":"Gillich, Eugen, and Volker Lohweg. “Banknotenauthentifizierung.” 1. Jahresolloquium “Bildverarbeitung in Der Automation,” Centrum Industrial IT, Lemgo, 2010.","van":"Gillich E, Lohweg V. Banknotenauthentifizierung. In: 1 Jahresolloquium “Bildverarbeitung in der Automation.” Centrum Industrial IT, Lemgo; 2010.","chicago":"Gillich, Eugen, and Volker Lohweg. “Banknotenauthentifizierung.” In 1. Jahresolloquium “Bildverarbeitung in Der Automation.” Centrum Industrial IT, Lemgo, 2010.","apa":"Gillich, E., & Lohweg, V. (2010). Banknotenauthentifizierung. In 1. Jahresolloquium “Bildverarbeitung in der Automation.” Centrum Industrial IT, Lemgo.","chicago-de":"Gillich, Eugen und Volker Lohweg. 2010. Banknotenauthentifizierung. In: 1. Jahresolloquium „Bildverarbeitung in der Automation“. Centrum Industrial IT, Lemgo.","din1505-2-1":"Gillich, Eugen ; Lohweg, Volker: Banknotenauthentifizierung. In: 1. Jahresolloquium „Bildverarbeitung in der Automation“ : Centrum Industrial IT, Lemgo, 2010","short":"E. Gillich, V. Lohweg, in: 1. Jahresolloquium “Bildverarbeitung in Der Automation,” Centrum Industrial IT, Lemgo, 2010."},"department":[{"_id":"DEP5023"}],"author":[{"id":"1706","first_name":"Eugen","full_name":"Gillich, Eugen","last_name":"Gillich"},{"full_name":"Lohweg, Volker","first_name":"Volker","last_name":"Lohweg","id":"1804","orcid":"0000-0002-3325-7887"}],"year":2010,"publisher":"Centrum Industrial IT, Lemgo","status":"public"},{"language":[{"iso":"eng"}],"place":"Lemgo","_id":"2095","type":"conference","date_created":"2019-12-02T10:30:32Z","publication":"inIT-Institut Industrial IT - ISBN 978-3-9814062-0-7","date_updated":"2023-03-15T13:49:38Z","user_id":"45673","department":[{"_id":"DEP5023"}],"author":[{"last_name":"Lohweg","full_name":"Lohweg, Volker","id":"1804","first_name":"Volker","orcid":"0000-0002-3325-7887"},{"first_name":"Bärbel","last_name":"Mertsching","full_name":"Mertsching, Bärbel"}],"year":2010,"status":"public","title":"1. Jahreskolloquium \"Bildverarbeitung in der Automation - BVAu2010\"","citation":{"chicago-de":"Lohweg, Volker und Bärbel Mertsching. 2010. 1. Jahreskolloquium „Bildverarbeitung in der Automation - BVAu2010“. In: inIT-Institut Industrial IT - ISBN 978-3-9814062-0-7. Lemgo.","din1505-2-1":"Lohweg, Volker ; Mertsching, Bärbel: 1. Jahreskolloquium „Bildverarbeitung in der Automation - BVAu2010“. In: inIT-Institut Industrial IT - ISBN 978-3-9814062-0-7. Lemgo, 2010","short":"V. Lohweg, B. Mertsching, in: InIT-Institut Industrial IT - ISBN 978-3-9814062-0-7, Lemgo, 2010.","chicago":"Lohweg, Volker, and Bärbel Mertsching. “1. Jahreskolloquium ‘Bildverarbeitung in Der Automation - BVAu2010.’” In InIT-Institut Industrial IT - ISBN 978-3-9814062-0-7. Lemgo, 2010.","ieee":"V. Lohweg and B. Mertsching, “1. Jahreskolloquium ‘Bildverarbeitung in der Automation - BVAu2010,’” in inIT-Institut Industrial IT - ISBN 978-3-9814062-0-7, 2010.","apa":"Lohweg, V., & Mertsching, B. (2010). 1. Jahreskolloquium “Bildverarbeitung in der Automation - BVAu2010.” In inIT-Institut Industrial IT - ISBN 978-3-9814062-0-7. Lemgo.","bjps":"Lohweg V and Mertsching B (2010) 1. Jahreskolloquium ‘Bildverarbeitung in Der Automation - BVAu2010’. InIT-Institut Industrial IT - ISBN 978-3-9814062-0-7. Lemgo.","mla":"Lohweg, Volker, and Bärbel Mertsching. “1. Jahreskolloquium ‘Bildverarbeitung in Der Automation - BVAu2010.’” InIT-Institut Industrial IT - ISBN 978-3-9814062-0-7, 2010.","havard":"V. Lohweg, B. Mertsching, 1. Jahreskolloquium “Bildverarbeitung in der Automation - BVAu2010,” in: InIT-Institut Industrial IT - ISBN 978-3-9814062-0-7, Lemgo, 2010.","ufg":"Lohweg, Volker/Mertsching, Bärbel (2010): 1. Jahreskolloquium „Bildverarbeitung in der Automation - BVAu2010“, in: inIT-Institut Industrial IT - ISBN 978-3-9814062-0-7, Lemgo.","ama":"Lohweg V, Mertsching B. 1. Jahreskolloquium “Bildverarbeitung in der Automation - BVAu2010.” In: InIT-Institut Industrial IT - ISBN 978-3-9814062-0-7. Lemgo; 2010.","van":"Lohweg V, Mertsching B. 1. Jahreskolloquium “Bildverarbeitung in der Automation - BVAu2010.” In: inIT-Institut Industrial IT - ISBN 978-3-9814062-0-7. Lemgo; 2010."}},{"status":"public","publication_date":"2010-02-04","author":[{"first_name":"Thomas","id":"46242","last_name":"Schulte","full_name":"Schulte, Thomas"}],"year":2010,"department":[{"_id":"DEP6020"}],"citation":{"ieee":"T. Schulte, “Schaltung zur Nachbildung einer elektrischen Last.” 2010.","apa":"Schulte, T. (2010). Schaltung zur Nachbildung einer elektrischen Last.","chicago":"Schulte, Thomas. “Schaltung Zur Nachbildung Einer Elektrischen Last,” 2010.","ama":"Schulte T. Schaltung zur Nachbildung einer elektrischen Last. 2010.","van":"Schulte T. Schaltung zur Nachbildung einer elektrischen Last. 2010.","havard":"T. Schulte, Schaltung zur Nachbildung einer elektrischen Last, (2010).","mla":"Schulte, Thomas. Schaltung Zur Nachbildung Einer Elektrischen Last. 2010.","bjps":"Schulte T (2010) Schaltung Zur Nachbildung Einer Elektrischen Last.","ufg":"Schulte, Thomas (2010): Schaltung zur Nachbildung einer elektrischen Last.","short":"T. Schulte, (2010).","din1505-2-1":"Schulte, Thomas: Schaltung zur Nachbildung einer elektrischen Last (2010)","chicago-de":"Schulte, Thomas. 2010. Schaltung zur Nachbildung einer elektrischen Last."},"title":"Schaltung zur Nachbildung einer elektrischen Last","_id":"3972","ipn":"DE102008034109","ipc":"G01R31/00","user_id":"74004","date_updated":"2023-03-15T13:49:49Z","date_created":"2020-11-19T12:02:40Z","type":"patent"},{"page":"16 - 19","status":"public","author":[{"id":"46242","first_name":"Thomas","full_name":"Schulte, Thomas","last_name":"Schulte"},{"first_name":"Harald","last_name":"Wertz","full_name":"Wertz, Harald"}],"year":2010,"citation":{"chicago-de":"Schulte, Thomas und Harald Wertz. 2010. Im virtuellen Testlabor : Echtzeitsimulation von Antrieben eraffnet Einsparpotentiale. Antriebstechnik, Nr. 5: 16–19.","din1505-2-1":"Schulte, Thomas ; Wertz, Harald: Im virtuellen Testlabor : Echtzeitsimulation von Antrieben eraffnet Einsparpotentiale. In: Antriebstechnik. Mainz, Vereinigte Fachverl. (2010), Nr. 5, S. 16–19","short":"T. Schulte, H. Wertz, Antriebstechnik (2010) 16–19.","chicago":"Schulte, Thomas, and Harald Wertz. “Im virtuellen Testlabor : Echtzeitsimulation von Antrieben eraffnet Einsparpotentiale.” Antriebstechnik, no. 5 (2010): 16–19.","apa":"Schulte, T., & Wertz, H. (2010). Im virtuellen Testlabor : Echtzeitsimulation von Antrieben eraffnet Einsparpotentiale. Antriebstechnik, (5), 16–19.","ufg":"Schulte, Thomas/Wertz, Harald (2010): Im virtuellen Testlabor : Echtzeitsimulation von Antrieben eraffnet Einsparpotentiale, in: Antriebstechnik (5), S. 16–19.","mla":"Schulte, Thomas, and Harald Wertz. “Im virtuellen Testlabor : Echtzeitsimulation von Antrieben eraffnet Einsparpotentiale.” Antriebstechnik, no. 5, Vereinigte Fachverl., 2010, pp. 16–19.","havard":"T. Schulte, H. Wertz, Im virtuellen Testlabor : Echtzeitsimulation von Antrieben eraffnet Einsparpotentiale, Antriebstechnik. (2010) 16–19.","bjps":"Schulte T and Wertz H (2010) Im virtuellen Testlabor : Echtzeitsimulation von Antrieben eraffnet Einsparpotentiale. Antriebstechnik 16–19.","van":"Schulte T, Wertz H. Im virtuellen Testlabor : Echtzeitsimulation von Antrieben eraffnet Einsparpotentiale. Antriebstechnik. 2010;(5):16–9.","ieee":"T. Schulte and H. Wertz, “Im virtuellen Testlabor : Echtzeitsimulation von Antrieben eraffnet Einsparpotentiale,” Antriebstechnik, no. 5, pp. 16–19, 2010.","ama":"Schulte T, Wertz H. Im virtuellen Testlabor : Echtzeitsimulation von Antrieben eraffnet Einsparpotentiale. Antriebstechnik. 2010;(5):16-19."},"title":"Im virtuellen Testlabor : Echtzeitsimulation von Antrieben eraffnet Einsparpotentiale","language":[{"iso":"ger"}],"date_updated":"2023-03-15T13:49:50Z","file_date_updated":"2020-11-24T10:34:23Z","date_created":"2020-11-24T10:32:35Z","publication_identifier":{"issn":["0341-2652"]},"publication":"Antriebstechnik","publisher":"Vereinigte Fachverl.","department":[{"_id":"DEP6020"}],"ddc":["004"],"abstract":[{"lang":"ger","text":"Die aus derAutomobilelektronik bekannte Hardware-in-the-Loop-SimulationzumTesten der Hard-und SoftwarevonSteuergeräfen hält nun auch Einzug in die Testlabare der Herste/lervon elektrischen Antrieben. HILSimulation bedeutet hier, dass einer zu testenden Serienrege/einrichtung eine nicht real vorhandene Rege/strecke über ein Echtzeitsystem mit entsprechender Peripherie simuliert wird. Der damit erreichte Automatisierungsgrad bei der Durchführung von Softwajetests erschließt erhebliche Einsparpotentiafe und ermöglicht kürzere Entwicklungszeiten."}],"issue":"5","file":[{"access_level":"local","date_updated":"2020-11-24T10:34:23Z","creator":"czr-e2t","relation":"main_file","content_type":"application/pdf","date_created":"2020-11-24T10:34:23Z","file_name":"schulte_testlabor.pdf","file_size":1190584,"file_id":"4048"}],"article_type":"original","publication_status":"published","place":"Mainz","_id":"4047","has_accepted_license":"1","user_id":"74004","type":"journal_article"},{"title":"Messung der Netzimpedanz im Frequenzbereich bis 20 kHz und Analyse der Oberschwingungen bis zur 200. Harmonischen in verschiedenen Niederspannungsnetzen.","citation":{"short":"E. Balzer, H. Borcherding, H. Grabe, in: EMV 2010: Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit 09.-11.März 2010, VDE-Verlag, Berlin, 2010.","din1505-2-1":"Balzer, Eugen ; Borcherding, Holger ; Grabe, Heyno: Messung der Netzimpedanz im Frequenzbereich bis 20 kHz und Analyse der Oberschwingungen bis zur 200. Harmonischen in verschiedenen Niederspannungsnetzen. In: EMV 2010: Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit 09.-11.März 2010. Berlin : VDE-Verlag, 2010","chicago-de":"Balzer, Eugen, Holger Borcherding und Heyno Grabe. 2010. Messung der Netzimpedanz im Frequenzbereich bis 20 kHz und Analyse der Oberschwingungen bis zur 200. Harmonischen in verschiedenen Niederspannungsnetzen. In: EMV 2010: Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit 09.-11.März 2010. Berlin: VDE-Verlag.","van":"Balzer E, Borcherding H, Grabe H. Messung der Netzimpedanz im Frequenzbereich bis 20 kHz und Analyse der Oberschwingungen bis zur 200. Harmonischen in verschiedenen Niederspannungsnetzen. In: EMV 2010: Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit 09-11März 2010. Berlin: VDE-Verlag; 2010.","ufg":"Balzer, Eugen et. al. (2010): Messung der Netzimpedanz im Frequenzbereich bis 20 kHz und Analyse der Oberschwingungen bis zur 200. Harmonischen in verschiedenen Niederspannungsnetzen., in: EMV 2010: Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit 09.-11.März 2010, Berlin.","bjps":"Balzer E, Borcherding H and Grabe H (2010) Messung der Netzimpedanz im Frequenzbereich bis 20 kHz und Analyse der Oberschwingungen bis zur 200. Harmonischen in verschiedenen Niederspannungsnetzen. EMV 2010: Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit 09.-11.März 2010. Berlin: VDE-Verlag.","havard":"E. Balzer, H. Borcherding, H. Grabe, Messung der Netzimpedanz im Frequenzbereich bis 20 kHz und Analyse der Oberschwingungen bis zur 200. Harmonischen in verschiedenen Niederspannungsnetzen., in: EMV 2010: Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit 09.-11.März 2010, VDE-Verlag, Berlin, 2010.","mla":"Balzer, Eugen, et al. “Messung der Netzimpedanz im Frequenzbereich bis 20 kHz und Analyse der Oberschwingungen bis zur 200. Harmonischen in verschiedenen Niederspannungsnetzen.” EMV 2010: Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit 09.-11.März 2010, VDE-Verlag, 2010.","apa":"Balzer, E., Borcherding, H., & Grabe, H. (2010). Messung der Netzimpedanz im Frequenzbereich bis 20 kHz und Analyse der Oberschwingungen bis zur 200. Harmonischen in verschiedenen Niederspannungsnetzen. In EMV 2010: Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit 09.-11.März 2010. Berlin: VDE-Verlag.","chicago":"Balzer, Eugen, Holger Borcherding, and Heyno Grabe. “Messung der Netzimpedanz im Frequenzbereich bis 20 kHz und Analyse der Oberschwingungen bis zur 200. Harmonischen in verschiedenen Niederspannungsnetzen.” In EMV 2010: Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit 09.-11.März 2010. Berlin: VDE-Verlag, 2010.","ama":"Balzer E, Borcherding H, Grabe H. Messung der Netzimpedanz im Frequenzbereich bis 20 kHz und Analyse der Oberschwingungen bis zur 200. Harmonischen in verschiedenen Niederspannungsnetzen. In: EMV 2010: Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit 09.-11.März 2010. Berlin: VDE-Verlag; 2010.","ieee":"E. Balzer, H. Borcherding, and H. Grabe, “Messung der Netzimpedanz im Frequenzbereich bis 20 kHz und Analyse der Oberschwingungen bis zur 200. Harmonischen in verschiedenen Niederspannungsnetzen.,” in EMV 2010: Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit 09.-11.März 2010, Düsseldorf, 2010."},"publication_status":"published","author":[{"first_name":"Eugen","full_name":"Balzer, Eugen","last_name":"Balzer"},{"last_name":"Borcherding","id":"1693","full_name":"Borcherding, Holger","first_name":"Holger"},{"last_name":"Grabe","full_name":"Grabe, Heyno","first_name":"Heyno"}],"year":2010,"conference":{"location":"Düsseldorf","name":"Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit (EMV) ","start_date":"2010-03-09","end_date":"2010-03-11"},"department":[{"_id":"DEP6020"}],"status":"public","publisher":"VDE-Verlag","publication":"EMV 2010: Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit 09.-11.März 2010","publication_identifier":{"isbn":["978-3-8007-3206-7"]},"type":"conference","date_created":"2020-12-09T11:54:33Z","user_id":"74004","date_updated":"2023-03-15T13:49:51Z","place":"Berlin","language":[{"iso":"ger"}],"_id":"4212"},{"status":"public","page":"631 - 635","year":2010,"author":[{"full_name":"Borcherding, Holger","first_name":"Holger","id":"1693","last_name":"Borcherding"},{"last_name":"Balzer","full_name":"Balzer, Eugen","first_name":"Eugen"},{"last_name":"Garbe","first_name":"Heyno","full_name":"Garbe, Heyno"}],"citation":{"chicago-de":"Borcherding, Holger, Eugen Balzer und Heyno Garbe. 2010. Measurements of mains impedances in the frequency range up to 20 kHz and analysis of harmonics up to 10kHz in low voltage mains. In: Proceedings - PCIM Europe 2010, 631–635.","din1505-2-1":"Borcherding, Holger ; Balzer, Eugen ; Garbe, Heyno: Measurements of mains impedances in the frequency range up to 20 kHz and analysis of harmonics up to 10kHz in low voltage mains. In: Proceedings - PCIM Europe 2010, 2010, S. 631–635","short":"H. Borcherding, E. Balzer, H. Garbe, in: Proceedings - PCIM Europe 2010, 2010, pp. 631–635.","ufg":"Borcherding, Holger et. al. (2010): Measurements of mains impedances in the frequency range up to 20 kHz and analysis of harmonics up to 10kHz in low voltage mains, in: Proceedings - PCIM Europe 2010, S. 631–635.","bjps":"Borcherding H, Balzer E and Garbe H (2010) Measurements of Mains Impedances in the Frequency Range up to 20 KHz and Analysis of Harmonics up to 10kHz in Low Voltage Mains. Proceedings - PCIM Europe 2010. pp. 631–635.","mla":"Borcherding, Holger, et al. “Measurements of Mains Impedances in the Frequency Range up to 20 KHz and Analysis of Harmonics up to 10kHz in Low Voltage Mains.” Proceedings - PCIM Europe 2010, 2010, pp. 631–35.","havard":"H. Borcherding, E. Balzer, H. Garbe, Measurements of mains impedances in the frequency range up to 20 kHz and analysis of harmonics up to 10kHz in low voltage mains, in: Proceedings - PCIM Europe 2010, 2010: pp. 631–635.","van":"Borcherding H, Balzer E, Garbe H. Measurements of mains impedances in the frequency range up to 20 kHz and analysis of harmonics up to 10kHz in low voltage mains. In: Proceedings - PCIM Europe 2010. 2010. p. 631–5.","chicago":"Borcherding, Holger, Eugen Balzer, and Heyno Garbe. “Measurements of Mains Impedances in the Frequency Range up to 20 KHz and Analysis of Harmonics up to 10kHz in Low Voltage Mains.” In Proceedings - PCIM Europe 2010, 631–35, 2010.","apa":"Borcherding, H., Balzer, E., & Garbe, H. (2010). Measurements of mains impedances in the frequency range up to 20 kHz and analysis of harmonics up to 10kHz in low voltage mains. In Proceedings - PCIM Europe 2010 (pp. 631–635). Exhibition Centre Nuremberg.","ama":"Borcherding H, Balzer E, Garbe H. Measurements of mains impedances in the frequency range up to 20 kHz and analysis of harmonics up to 10kHz in low voltage mains. In: Proceedings - PCIM Europe 2010. ; 2010:631-635.","ieee":"H. Borcherding, E. Balzer, and H. Garbe, “Measurements of mains impedances in the frequency range up to 20 kHz and analysis of harmonics up to 10kHz in low voltage mains,” in Proceedings - PCIM Europe 2010, Exhibition Centre Nuremberg, 2010, pp. 631–635."},"title":"Measurements of mains impedances in the frequency range up to 20 kHz and analysis of harmonics up to 10kHz in low voltage mains","language":[{"iso":"eng"}],"file_date_updated":"2020-12-09T12:07:28Z","date_updated":"2023-03-15T13:49:51Z","publication_identifier":{"isbn":["978-3-8007-3229-6"]},"publication":"Proceedings - PCIM Europe 2010","date_created":"2020-12-09T12:04:13Z","abstract":[{"text":"Currently there are general limits for conducted emissions only in the frequency range up to 2 kHz [1],[2] and above 150 kHz [3]. Limits for the frequency range from 2 kHz to 9 kHz are in discussion. Because of this mentioned gap in the standards there is an uncertainty how to design filters and disturbance sources like converters. For finding limits investigations are necessary on mains impedances and harmonics. There are older publications on mains impedances (e. g. [4], [5]), but they include only measurements of impedances between one phase and neutral conductor and no measurements of impedances between the phases. This is important for three-phase loads. Furthermore in [4] no measurements were made in industrial mains and the investigations were carried out more than one decade ago. Especiaily in the last years the electrical environment in the mains has changed because of the increasing number of self-commutated converters. Accordingly, much higher amplitudes for harmonics in the upper frequency range are identifiable. In this paper current investigations on mains impedances and harmonics are presented which were carried out in universities, companies and private houses. The results could be used as a base for finding limits and for designing filters and disturbance sources economicaily.","lang":"eng"}],"ddc":["004"],"department":[{"_id":"DEP6020"}],"conference":{"location":"Exhibition Centre Nuremberg","name":"International Exhibition & Conference for Power Electronics Intelligent Motion Power Quality","end_date":"2010-05-06","start_date":"2010-05-04"},"publication_status":"published","file":[{"file_name":"Borcherding_Measurements.pdf","content_type":"application/pdf","date_created":"2020-12-09T12:07:28Z","file_id":"4214","file_size":524058,"creator":"czr-e2t","relation":"main_file","date_updated":"2020-12-09T12:07:28Z","access_level":"local"}],"_id":"4213","has_accepted_license":"1","user_id":"74004","type":"conference"},{"type":"conference","date_created":"2021-01-20T08:12:07Z","date_updated":"2023-03-15T13:49:53Z","user_id":"45673","_id":"4454","language":[{"iso":"eng"}],"title":"Statistical Models of Network Traffic","citation":{"ama":"Kumar B, Niggemann O, Jasperneite J. Statistical Models of Network Traffic. In: ; 2010.","ieee":"B. Kumar, O. Niggemann, and J. Jasperneite, “Statistical Models of Network Traffic,” presented at the International Conference on Computer, Electrical and Systems Science, Cape Town, South Africa, 2010.","ufg":"Kumar, Barath et. al. (2010): Statistical Models of Network Traffic, in: .","bjps":"Kumar B, Niggemann O and Jasperneite J (2010) Statistical Models of Network Traffic.","mla":"Kumar, Barath, et al. Statistical Models of Network Traffic. 2010.","havard":"B. Kumar, O. Niggemann, J. Jasperneite, Statistical Models of Network Traffic, in: 2010.","van":"Kumar B, Niggemann O, Jasperneite J. Statistical Models of Network Traffic. In 2010.","chicago":"Kumar, Barath, Oliver Niggemann, and Jürgen Jasperneite. “Statistical Models of Network Traffic,” 2010.","apa":"Kumar, B., Niggemann, O., & Jasperneite, J. (2010). Statistical Models of Network Traffic. Presented at the International Conference on Computer, Electrical and Systems Science, Cape Town, South Africa.","chicago-de":"Kumar, Barath, Oliver Niggemann und Jürgen Jasperneite. 2010. Statistical Models of Network Traffic. In: .","din1505-2-1":"Kumar, Barath ; Niggemann, Oliver ; Jasperneite, Jürgen: Statistical Models of Network Traffic. In: , 2010","short":"B. Kumar, O. Niggemann, J. Jasperneite, in: 2010."},"department":[{"_id":"DEP5019"},{"_id":"DEP5023"}],"conference":{"name":"International Conference on Computer, Electrical and Systems Science","location":"Cape Town, South Africa"},"author":[{"first_name":"Barath","last_name":"Kumar","full_name":"Kumar, Barath"},{"last_name":"Niggemann","first_name":"Oliver","full_name":"Niggemann, Oliver","id":"10876"},{"full_name":"Jasperneite, Jürgen","id":"1899","last_name":"Jasperneite","first_name":"Jürgen"}],"year":2010,"status":"public"},{"date_created":"2021-01-20T08:16:41Z","type":"conference","date_updated":"2023-03-15T13:49:53Z","user_id":"45673","language":[{"iso":"eng"}],"_id":"4455","title":"Model-based Development of Automation Systems","citation":{"short":"O. Niggemann, A. Maier, J. Jasperneite, in: 2010.","din1505-2-1":"Niggemann, Oliver ; Maier, Alexander ; Jasperneite, Jürgen: Model-based Development of Automation Systems. In: , 2010","chicago-de":"Niggemann, Oliver, Alexander Maier und Jürgen Jasperneite. 2010. Model-based Development of Automation Systems. In: .","ieee":"O. Niggemann, A. Maier, and J. Jasperneite, “Model-based Development of Automation Systems,” presented at the 6. Dagstuhl-Workshop MBEES 2010: Modellbasierte Entwicklung eingebetteter Systeme, 2010.","apa":"Niggemann, O., Maier, A., & Jasperneite, J. (2010). Model-based Development of Automation Systems. Presented at the 6. Dagstuhl-Workshop MBEES 2010: Modellbasierte Entwicklung eingebetteter Systeme.","chicago":"Niggemann, Oliver, Alexander Maier, and Jürgen Jasperneite. “Model-Based Development of Automation Systems,” 2010.","ama":"Niggemann O, Maier A, Jasperneite J. Model-based Development of Automation Systems. In: ; 2010.","van":"Niggemann O, Maier A, Jasperneite J. Model-based Development of Automation Systems. In 2010.","havard":"O. Niggemann, A. Maier, J. Jasperneite, Model-based Development of Automation Systems, in: 2010.","bjps":"Niggemann O, Maier A and Jasperneite J (2010) Model-Based Development of Automation Systems.","mla":"Niggemann, Oliver, et al. Model-Based Development of Automation Systems. 2010.","ufg":"Niggemann, Oliver et. al. (2010): Model-based Development of Automation Systems, in: ."},"conference":{"name":"6. Dagstuhl-Workshop MBEES 2010: Modellbasierte Entwicklung eingebetteter Systeme"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"last_name":"Niggemann","full_name":"Niggemann, Oliver","first_name":"Oliver","id":"10876"},{"first_name":"Alexander","id":"11158","last_name":"Maier","full_name":"Maier, Alexander"},{"full_name":"Jasperneite, Jürgen","first_name":"Jürgen","last_name":"Jasperneite","id":"1899"}],"year":2010,"status":"public"},{"type":"conference","date_created":"2021-01-20T08:19:30Z","date_updated":"2023-03-15T13:49:53Z","user_id":"45673","language":[{"iso":"eng"}],"_id":"4458","title":"Automatic derivation of TTCN-3 test cases from UML state machines","citation":{"van":"Czybik B, Kumar B, Jasperneite J. Automatic derivation of TTCN-3 test cases from UML state machines. In 2010.","ama":"Czybik B, Kumar B, Jasperneite J. Automatic derivation of TTCN-3 test cases from UML state machines. In: ; 2010.","ufg":"Czybik, Björn et. al. (2010): Automatic derivation of TTCN-3 test cases from UML state machines, in: .","mla":"Czybik, Björn, et al. Automatic Derivation of TTCN-3 Test Cases from UML State Machines. 2010.","havard":"B. Czybik, B. Kumar, J. Jasperneite, Automatic derivation of TTCN-3 test cases from UML state machines, in: 2010.","bjps":"Czybik B, Kumar B and Jasperneite J (2010) Automatic Derivation of TTCN-3 Test Cases from UML State Machines.","apa":"Czybik, B., Kumar, B., & Jasperneite, J. (2010). Automatic derivation of TTCN-3 test cases from UML state machines. Lemgo.","ieee":"B. Czybik, B. Kumar, and J. Jasperneite, “Automatic derivation of TTCN-3 test cases from UML state machines,” Lemgo, 2010.","chicago":"Czybik, Björn, Barath Kumar, and Jürgen Jasperneite. “Automatic Derivation of TTCN-3 Test Cases from UML State Machines,” 2010.","short":"B. Czybik, B. Kumar, J. Jasperneite, in: 2010.","din1505-2-1":"Czybik, Björn ; Kumar, Barath ; Jasperneite, Jürgen: Automatic derivation of TTCN-3 test cases from UML state machines. In: , 2010","chicago-de":"Czybik, Björn, Barath Kumar und Jürgen Jasperneite. 2010. Automatic derivation of TTCN-3 test cases from UML state machines. In: ."},"conference":{"location":"Lemgo"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"full_name":"Czybik, Björn","last_name":"Czybik","id":"76180","first_name":"Björn"},{"full_name":"Kumar, Barath","first_name":"Barath","last_name":"Kumar"},{"first_name":"Jürgen","last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen"}],"year":2010,"status":"public"},{"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"full_name":"Kumar, Barath","first_name":"Barath","last_name":"Kumar"},{"last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","id":"1899","first_name":"Jürgen"}],"year":2010,"status":"public","title":"UML Profiles for Modeling Real-Time Communication Protocols","citation":{"short":"B. Kumar, J. Jasperneite, Journal of Object Technology (2010).","din1505-2-1":"Kumar, Barath ; Jasperneite, Jürgen: UML Profiles for Modeling Real-Time Communication Protocols. In: Journal of Object Technology (2010)","chicago-de":"Kumar, Barath und Jürgen Jasperneite. 2010. UML Profiles for Modeling Real-Time Communication Protocols. Journal of Object Technology .","apa":"Kumar, B., & Jasperneite, J. (2010). UML Profiles for Modeling Real-Time Communication Protocols. Journal of Object Technology .","ieee":"B. Kumar and J. Jasperneite, “UML Profiles for Modeling Real-Time Communication Protocols,” Journal of Object Technology , 2010.","chicago":"Kumar, Barath, and Jürgen Jasperneite. “UML Profiles for Modeling Real-Time Communication Protocols.” Journal of Object Technology , 2010.","van":"Kumar B, Jasperneite J. UML Profiles for Modeling Real-Time Communication Protocols. Journal of Object Technology . 2010;","ama":"Kumar B, Jasperneite J. UML Profiles for Modeling Real-Time Communication Protocols. Journal of Object Technology . 2010.","ufg":"Kumar, Barath/Jasperneite, Jürgen (2010): UML Profiles for Modeling Real-Time Communication Protocols, in: Journal of Object Technology .","havard":"B. Kumar, J. Jasperneite, UML Profiles for Modeling Real-Time Communication Protocols, Journal of Object Technology . (2010).","bjps":"Kumar B and Jasperneite J (2010) UML Profiles for Modeling Real-Time Communication Protocols. Journal of Object Technology .","mla":"Kumar, Barath, and Jürgen Jasperneite. “UML Profiles for Modeling Real-Time Communication Protocols.” Journal of Object Technology , 2010."},"_id":"4463","language":[{"iso":"eng"}],"type":"journal_article","date_created":"2021-01-20T08:35:38Z","publication":"Journal of Object Technology ","date_updated":"2023-03-15T13:49:53Z","user_id":"45673"},{"date_updated":"2023-03-15T13:49:53Z","user_id":"45673","date_created":"2021-01-20T08:37:58Z","type":"conference","_id":"4464","language":[{"iso":"eng"}],"citation":{"short":"B. Kumar, O. Niggemann, J. Jasperneite, in: 2010.","din1505-2-1":"Kumar, Barath ; Niggemann, Oliver ; Jasperneite, Jürgen: Test Generation for Hybrid, Probabilistic Control Models. In: , 2010","chicago-de":"Kumar, Barath, Oliver Niggemann und Jürgen Jasperneite. 2010. Test Generation for Hybrid, Probabilistic Control Models. In: .","apa":"Kumar, B., Niggemann, O., & Jasperneite, J. (2010). Test Generation for Hybrid, Probabilistic Control Models. Presented at the Entwurf komplexer Automatisierungssysteme (EKA 2010) , Magdeburg, Germany.","ieee":"B. Kumar, O. Niggemann, and J. Jasperneite, “Test Generation for Hybrid, Probabilistic Control Models,” presented at the Entwurf komplexer Automatisierungssysteme (EKA 2010) , Magdeburg, Germany, 2010.","chicago":"Kumar, Barath, Oliver Niggemann, and Jürgen Jasperneite. “Test Generation for Hybrid, Probabilistic Control Models,” 2010.","van":"Kumar B, Niggemann O, Jasperneite J. Test Generation for Hybrid, Probabilistic Control Models. In 2010.","ama":"Kumar B, Niggemann O, Jasperneite J. Test Generation for Hybrid, Probabilistic Control Models. In: ; 2010.","ufg":"Kumar, Barath et. al. (2010): Test Generation for Hybrid, Probabilistic Control Models, in: .","havard":"B. Kumar, O. Niggemann, J. Jasperneite, Test Generation for Hybrid, Probabilistic Control Models, in: 2010.","mla":"Kumar, Barath, et al. Test Generation for Hybrid, Probabilistic Control Models. 2010.","bjps":"Kumar B, Niggemann O and Jasperneite J (2010) Test Generation for Hybrid, Probabilistic Control Models."},"title":"Test Generation for Hybrid, Probabilistic Control Models","status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"name":"Entwurf komplexer Automatisierungssysteme (EKA 2010) ","location":"Magdeburg, Germany"},"year":2010,"author":[{"full_name":"Kumar, Barath","first_name":"Barath","last_name":"Kumar"},{"full_name":"Niggemann, Oliver","last_name":"Niggemann","id":"10876","first_name":"Oliver"},{"last_name":"Jasperneite","first_name":"Jürgen","id":"1899","full_name":"Jasperneite, Jürgen"}]},{"language":[{"iso":"eng"}],"_id":"4465","date_updated":"2023-03-15T13:49:53Z","user_id":"45673","date_created":"2021-01-20T08:39:38Z","type":"conference","status":"public","conference":{"name":"Entwurf komplexer Automatisierungssysteme (EKA 2010) ","location":"Magdeburg, Germany"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"last_name":"Kumar","full_name":"Kumar, Barath","first_name":"Barath"},{"id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"}],"year":2010,"citation":{"short":"B. Kumar, J. Jasperneite, in: 2010.","din1505-2-1":"Kumar, Barath ; Jasperneite, Jürgen: MARTE’s Schedulability sub-package (SAM): From theory to implementation. In: , 2010","chicago-de":"Kumar, Barath und Jürgen Jasperneite. 2010. MARTE’s Schedulability sub-package (SAM): From theory to implementation. In: .","apa":"Kumar, B., & Jasperneite, J. (2010). MARTE’s Schedulability sub-package (SAM): From theory to implementation. Presented at the Entwurf komplexer Automatisierungssysteme (EKA 2010) , Magdeburg, Germany.","ieee":"B. Kumar and J. Jasperneite, “MARTE’s Schedulability sub-package (SAM): From theory to implementation,” presented at the Entwurf komplexer Automatisierungssysteme (EKA 2010) , Magdeburg, Germany, 2010.","chicago":"Kumar, Barath, and Jürgen Jasperneite. “MARTE’s Schedulability Sub-Package (SAM): From Theory to Implementation,” 2010.","van":"Kumar B, Jasperneite J. MARTE’s Schedulability sub-package (SAM): From theory to implementation. In 2010.","ama":"Kumar B, Jasperneite J. MARTE’s Schedulability sub-package (SAM): From theory to implementation. In: ; 2010.","ufg":"Kumar, Barath/Jasperneite, Jürgen (2010): MARTE’s Schedulability sub-package (SAM): From theory to implementation, in: .","havard":"B. Kumar, J. Jasperneite, MARTE’s Schedulability sub-package (SAM): From theory to implementation, in: 2010.","mla":"Kumar, Barath, and Jürgen Jasperneite. MARTE’s Schedulability Sub-Package (SAM): From Theory to Implementation. 2010.","bjps":"Kumar B and Jasperneite J (2010) MARTE’s Schedulability Sub-Package (SAM): From Theory to Implementation."},"title":"MARTE's Schedulability sub-package (SAM): From theory to implementation"},{"status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"location":"Nancy, France","name":"8th IEEE International Workshop on Factory Communication Systems COMMUNICATION in AUTOMATION (WFCS 2010)"},"author":[{"full_name":"Imtiaz, Jahanzaib","first_name":"Jahanzaib","last_name":"Imtiaz"},{"first_name":"Lukasz","last_name":"Wisniewski","full_name":"Wisniewski, Lukasz","id":"1710"},{"first_name":"Jürgen","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","id":"1899"},{"last_name":"Weber","first_name":"Karl","full_name":"Weber, Karl"}],"year":2010,"citation":{"ieee":"J. Imtiaz, L. Wisniewski, J. Jasperneite, and K. Weber, “A Layer-2 Multicast Forwarding Policy for a Generic Real-time Ethernet System,” presented at the 8th IEEE International Workshop on Factory Communication Systems COMMUNICATION in AUTOMATION (WFCS 2010), Nancy, France, 2010.","ama":"Imtiaz J, Wisniewski L, Jasperneite J, Weber K. A Layer-2 Multicast Forwarding Policy for a Generic Real-time Ethernet System. In: ; 2010.","din1505-2-1":"Imtiaz, Jahanzaib ; Wisniewski, Lukasz ; Jasperneite, Jürgen ; Weber, Karl: A Layer-2 Multicast Forwarding Policy for a Generic Real-time Ethernet System. In: , 2010","chicago-de":"Imtiaz, Jahanzaib, Lukasz Wisniewski, Jürgen Jasperneite und Karl Weber. 2010. A Layer-2 Multicast Forwarding Policy for a Generic Real-time Ethernet System. In: .","short":"J. Imtiaz, L. Wisniewski, J. Jasperneite, K. Weber, in: 2010.","chicago":"Imtiaz, Jahanzaib, Lukasz Wisniewski, Jürgen Jasperneite, and Karl Weber. “A Layer-2 Multicast Forwarding Policy for a Generic Real-Time Ethernet System,” 2010.","apa":"Imtiaz, J., Wisniewski, L., Jasperneite, J., & Weber, K. (2010). A Layer-2 Multicast Forwarding Policy for a Generic Real-time Ethernet System. Presented at the 8th IEEE International Workshop on Factory Communication Systems COMMUNICATION in AUTOMATION (WFCS 2010), Nancy, France.","bjps":"Imtiaz J et al. (2010) A Layer-2 Multicast Forwarding Policy for a Generic Real-Time Ethernet System.","havard":"J. Imtiaz, L. Wisniewski, J. Jasperneite, K. Weber, A Layer-2 Multicast Forwarding Policy for a Generic Real-time Ethernet System, in: 2010.","mla":"Imtiaz, Jahanzaib, et al. A Layer-2 Multicast Forwarding Policy for a Generic Real-Time Ethernet System. 2010.","ufg":"Imtiaz, Jahanzaib et. al. (2010): A Layer-2 Multicast Forwarding Policy for a Generic Real-time Ethernet System, in: .","van":"Imtiaz J, Wisniewski L, Jasperneite J, Weber K. A Layer-2 Multicast Forwarding Policy for a Generic Real-time Ethernet System. In 2010."},"title":"A Layer-2 Multicast Forwarding Policy for a Generic Real-time Ethernet System","_id":"4466","language":[{"iso":"eng"}],"date_updated":"2023-03-15T13:49:53Z","user_id":"45673","date_created":"2021-01-20T08:41:43Z","type":"conference"},{"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"name":"8th IEEE International Workshop on Factory Communication Systems COMMUNICATION in AUTOMATION (WFCS 2010) ","location":"Nancy, France"},"author":[{"first_name":"Ivan","full_name":"Dominguez, Ivan","last_name":"Dominguez"},{"full_name":"Wisniewski, Lukasz","first_name":"Lukasz","last_name":"Wisniewski","id":"1710"},{"last_name":"Trsek","first_name":"Henning","full_name":"Trsek, Henning","id":"1486"},{"last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"}],"year":2010,"status":"public","title":"Link-Layer Retransmissions in IEEE 802.11g based Industrial Networks","citation":{"ieee":"I. Dominguez, L. Wisniewski, H. Trsek, and J. Jasperneite, “Link-Layer Retransmissions in IEEE 802.11g based Industrial Networks,” presented at the 8th IEEE International Workshop on Factory Communication Systems COMMUNICATION in AUTOMATION (WFCS 2010) , Nancy, France, 2010.","ama":"Dominguez I, Wisniewski L, Trsek H, Jasperneite J. Link-Layer Retransmissions in IEEE 802.11g based Industrial Networks. In: ; 2010.","apa":"Dominguez, I., Wisniewski, L., Trsek, H., & Jasperneite, J. (2010). Link-Layer Retransmissions in IEEE 802.11g based Industrial Networks. Presented at the 8th IEEE International Workshop on Factory Communication Systems COMMUNICATION in AUTOMATION (WFCS 2010) , Nancy, France.","chicago":"Dominguez, Ivan, Lukasz Wisniewski, Henning Trsek, and Jürgen Jasperneite. “Link-Layer Retransmissions in IEEE 802.11g Based Industrial Networks,” 2010.","van":"Dominguez I, Wisniewski L, Trsek H, Jasperneite J. Link-Layer Retransmissions in IEEE 802.11g based Industrial Networks. In 2010.","havard":"I. Dominguez, L. Wisniewski, H. Trsek, J. Jasperneite, Link-Layer Retransmissions in IEEE 802.11g based Industrial Networks, in: 2010.","bjps":"Dominguez I et al. (2010) Link-Layer Retransmissions in IEEE 802.11g Based Industrial Networks.","mla":"Dominguez, Ivan, et al. Link-Layer Retransmissions in IEEE 802.11g Based Industrial Networks. 2010.","ufg":"Dominguez, Ivan et. al. (2010): Link-Layer Retransmissions in IEEE 802.11g based Industrial Networks, in: .","short":"I. Dominguez, L. Wisniewski, H. Trsek, J. Jasperneite, in: 2010.","chicago-de":"Dominguez, Ivan, Lukasz Wisniewski, Henning Trsek und Jürgen Jasperneite. 2010. Link-Layer Retransmissions in IEEE 802.11g based Industrial Networks. In: .","din1505-2-1":"Dominguez, Ivan ; Wisniewski, Lukasz ; Trsek, Henning ; Jasperneite, Jürgen: Link-Layer Retransmissions in IEEE 802.11g based Industrial Networks. In: , 2010"},"_id":"4467","language":[{"iso":"eng"}],"type":"conference","date_created":"2021-01-20T08:46:33Z","date_updated":"2023-03-15T13:49:53Z","user_id":"45673"},{"page":"111-118","status":"public","main_file_link":[{"open_access":"1"}],"year":2010,"author":[{"last_name":"Beul","first_name":"Shirley","full_name":"Beul, Shirley"},{"full_name":"Klack, Lars","first_name":"Lars","last_name":"Klack"},{"last_name":"Kasugai","first_name":"Kai","full_name":"Kasugai, Kai"},{"last_name":"Möllering","first_name":"Christina","full_name":"Möllering, Christina"},{"id":"61525","full_name":"Röcker, Carsten","last_name":"Röcker","first_name":"Carsten"},{"first_name":"Wiktoria","full_name":"Wilkowska, Wiktoria","last_name":"Wilkowska"},{"first_name":"Martina","last_name":"Ziefle","full_name":"Ziefle, Martina"}],"volume":69,"citation":{"ieee":"S. Beul et al., “Between Innovation and Daily Practice in the Development of AAL Systems: Learning from the Experience with Today’s Systems,” in Electronic Healthcare, Casablanca, Morocco, 2010, vol. 69, pp. 111–118.","apa":"Beul, S., Klack, L., Kasugai, K., Möllering, C., Röcker, C., Wilkowska, W., & Ziefle, M. (2010). Between Innovation and Daily Practice in the Development of AAL Systems: Learning from the Experience with Today’s Systems. In M. Szomszor & P. Kostkova (Eds.), Electronic Healthcare (Vol. 69, pp. 111–118). Casablanca, Morocco. https://doi.org/10.1007/978-3-642-23635-8_14","chicago":"Beul, Shirley, Lars Klack, Kai Kasugai, Christina Möllering, Carsten Röcker, Wiktoria Wilkowska, and Martina Ziefle. “Between Innovation and Daily Practice in the Development of AAL Systems: Learning from the Experience with Today’s Systems.” In Electronic Healthcare, edited by Martin Szomszor and Patty Kostkova, 69:111–18. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, 2010. https://doi.org/10.1007/978-3-642-23635-8_14.","ama":"Beul S, Klack L, Kasugai K, et al. Between Innovation and Daily Practice in the Development of AAL Systems: Learning from the Experience with Today’s Systems. In: Szomszor M, Kostkova P, eds. Electronic Healthcare. Vol 69. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering. ; 2010:111-118. doi:10.1007/978-3-642-23635-8_14","van":"Beul S, Klack L, Kasugai K, Möllering C, Röcker C, Wilkowska W, et al. Between Innovation and Daily Practice in the Development of AAL Systems: Learning from the Experience with Today’s Systems. In: Szomszor M, Kostkova P, editors. Electronic Healthcare. 2010. p. 111–8. ( Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering; vol. 69).","havard":"S. Beul, L. Klack, K. Kasugai, C. Möllering, C. Röcker, W. Wilkowska, M. Ziefle, Between Innovation and Daily Practice in the Development of AAL Systems: Learning from the Experience with Today’s Systems, in: M. Szomszor, P. Kostkova (Eds.), Electronic Healthcare, 2010: pp. 111–118.","bjps":"Beul S et al. (2010) Between Innovation and Daily Practice in the Development of AAL Systems: Learning from the Experience with Today’s Systems. In Szomszor M and Kostkova P (eds), Electronic Healthcare, vol. 69. pp. 111–118.","mla":"Beul, Shirley, et al. “Between Innovation and Daily Practice in the Development of AAL Systems: Learning from the Experience with Today’s Systems.” Electronic Healthcare, edited by Martin Szomszor and Patty Kostkova, vol. 69, 2010, pp. 111–18, doi:10.1007/978-3-642-23635-8_14.","ufg":"Beul, Shirley et. al. (2010): Between Innovation and Daily Practice in the Development of AAL Systems: Learning from the Experience with Today’s Systems, in: Martin Szomszor/Patty Kostkova (Hgg.): Electronic Healthcare (= Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering 69), S. 111–118.","short":"S. Beul, L. Klack, K. Kasugai, C. Möllering, C. Röcker, W. Wilkowska, M. Ziefle, in: M. Szomszor, P. Kostkova (Eds.), Electronic Healthcare, 2010, pp. 111–118.","din1505-2-1":"Beul, Shirley ; Klack, Lars ; Kasugai, Kai ; Möllering, Christina ; Röcker, Carsten ; Wilkowska, Wiktoria ; Ziefle, Martina: Between Innovation and Daily Practice in the Development of AAL Systems: Learning from the Experience with Today’s Systems. In: Szomszor, M. ; Kostkova, P. (Hrsg.): Electronic Healthcare, Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering. Bd. 69, 2010, S. 111–118","chicago-de":"Beul, Shirley, Lars Klack, Kai Kasugai, Christina Möllering, Carsten Röcker, Wiktoria Wilkowska und Martina Ziefle. 2010. Between Innovation and Daily Practice in the Development of AAL Systems: Learning from the Experience with Today’s Systems. In: Electronic Healthcare, hg. von Martin Szomszor und Patty Kostkova, 69:111–118. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering. doi:10.1007/978-3-642-23635-8_14, ."},"extern":"1","title":"Between Innovation and Daily Practice in the Development of AAL Systems: Learning from the Experience with Today’s Systems","language":[{"iso":"eng"}],"keyword":["eHealth","Ambient Assisted Living Telemonitoring","Telecare","Future Care Lab","Personal Emergency Response System","PERS"],"oa":"1","date_updated":"2023-03-15T13:49:53Z","editor":[{"last_name":"Szomszor","full_name":"Szomszor, Martin ","first_name":"Martin "},{"full_name":"Kostkova, Patty ","last_name":"Kostkova","first_name":"Patty "}],"date_created":"2021-01-21T09:21:19Z","publication":"Electronic Healthcare","publication_identifier":{"eisbn":["978-3-642-23635-8"],"isbn":["978-3-642-23634-1 "]},"department":[{"_id":"DEP5023"}],"conference":{"start_date":"2010-12-13","end_date":"2010-12-15","name":"Third International Conference, eHealth 2010","location":"Casablanca, Morocco"},"abstract":[{"lang":"eng","text":"In this paper we delineate and compare the functional and structural potential but also shortcomings of two Ambient Assisted Living (AAL) systems, which aim at providing remote care for elder adults living independently at home. One system, a personal emergency response system, is already in use, the other system, the Future Care Lab, presents a holistic tele-medical care setting, which is currently in its conceptualization and test phase at RWTH Aachen University. By learning from the experience with a well-established system in both, restrictions and benefits, implications for a user-centred development for future telemedical systems can be derived."}],"publication_status":"published","series_title":" Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering","doi":"10.1007/978-3-642-23635-8_14","_id":"4489","user_id":"15514","intvolume":" 69","type":"conference"},{"doi":"10.1109/ICCAE.2010.5451637","_id":"4490","place":"Piscataway, NJ","type":"conference","user_id":"15514","abstract":[{"lang":"eng","text":"This paper reports on a cross-cultural user study, which analyzes the perception of concerns commonly associated with technology-enhanced environments. The results of the study show that the concerns addressed in state-of-the-art literature do only partially reflect the concerns of potential users. The analysis also shows that the perception is significantly influenced by several factors. Especially the participants' cultural background has a significant influence on the perception of most concerns."}],"conference":{"location":"Singapore","name":"2nd International IEEE Conference on Computer and Automation Engineering (ICCAE'10)","start_date":"2010-02-26","end_date":"2010-02-28"},"department":[{"_id":"DEP5023"}],"publisher":"IEEE","publication_status":"published","oa":"1","language":[{"iso":"eng"}],"keyword":["Ubiquitous any Pervasive Computing","Ambient Intelligence","Intelligent Environments","Smart Spaces","Technology Acceptance","User Stuyy","Evaluation"],"date_created":"2021-01-21T09:21:21Z","publication":"Proceedings of the Second International IEEE Conference on Computer and Automation Engineering (ICCAE'10)","publication_identifier":{"isbn":["978-1-4244-5585-0 "]},"editor":[{"first_name":"V.","full_name":"Mahadevan, V.","last_name":"Mahadevan"},{"full_name":"Jianhong, Z.","first_name":"Z.","last_name":"Jianhong"}],"date_updated":"2023-03-15T13:49:53Z","year":2010,"main_file_link":[{"open_access":"1"}],"author":[{"full_name":"Röcker, Carsten","first_name":"Carsten","id":"61525","last_name":"Röcker"}],"page":"513 - 517","status":"public","extern":"1","title":"Living and Working in Automated Environments - Evaluating the Concerns of End-Users in Technology-Enhanced Spaces","citation":{"ama":"Röcker C. Living and Working in Automated Environments - Evaluating the Concerns of End-Users in Technology-Enhanced Spaces. In: Mahadevan V, Jianhong Z, eds. Proceedings of the Second International IEEE Conference on Computer and Automation Engineering (ICCAE’10). Piscataway, NJ: IEEE; 2010:513-517. doi:10.1109/ICCAE.2010.5451637","van":"Röcker C. Living and Working in Automated Environments - Evaluating the Concerns of End-Users in Technology-Enhanced Spaces. In: Mahadevan V, Jianhong Z, editors. Proceedings of the Second International IEEE Conference on Computer and Automation Engineering (ICCAE’10). Piscataway, NJ: IEEE; 2010. p. 513–7.","mla":"Röcker, Carsten. “Living and Working in Automated Environments - Evaluating the Concerns of End-Users in Technology-Enhanced Spaces.” Proceedings of the Second International IEEE Conference on Computer and Automation Engineering (ICCAE’10), edited by V. Mahadevan and Z. Jianhong, IEEE, 2010, pp. 513–17, doi:10.1109/ICCAE.2010.5451637.","havard":"C. Röcker, Living and Working in Automated Environments - Evaluating the Concerns of End-Users in Technology-Enhanced Spaces, in: V. Mahadevan, Z. Jianhong (Eds.), Proceedings of the Second International IEEE Conference on Computer and Automation Engineering (ICCAE’10), IEEE, Piscataway, NJ, 2010: pp. 513–517.","bjps":"Röcker C (2010) Living and Working in Automated Environments - Evaluating the Concerns of End-Users in Technology-Enhanced Spaces. In Mahadevan V and Jianhong Z (eds), Proceedings of the Second International IEEE Conference on Computer and Automation Engineering (ICCAE’10). Piscataway, NJ: IEEE, pp. 513–517.","ufg":"Röcker, Carsten (2010): Living and Working in Automated Environments - Evaluating the Concerns of End-Users in Technology-Enhanced Spaces, in: V. Mahadevan/Z. Jianhong (Hgg.): Proceedings of the Second International IEEE Conference on Computer and Automation Engineering (ICCAE’10), Piscataway, NJ, S. 513–517.","ieee":"C. Röcker, “Living and Working in Automated Environments - Evaluating the Concerns of End-Users in Technology-Enhanced Spaces,” in Proceedings of the Second International IEEE Conference on Computer and Automation Engineering (ICCAE’10), Singapore, 2010, pp. 513–517.","apa":"Röcker, C. (2010). Living and Working in Automated Environments - Evaluating the Concerns of End-Users in Technology-Enhanced Spaces. In V. Mahadevan & Z. Jianhong (Eds.), Proceedings of the Second International IEEE Conference on Computer and Automation Engineering (ICCAE’10) (pp. 513–517). Piscataway, NJ: IEEE. https://doi.org/10.1109/ICCAE.2010.5451637","chicago":"Röcker, Carsten. “Living and Working in Automated Environments - Evaluating the Concerns of End-Users in Technology-Enhanced Spaces.” In Proceedings of the Second International IEEE Conference on Computer and Automation Engineering (ICCAE’10), edited by V. Mahadevan and Z. Jianhong, 513–17. Piscataway, NJ: IEEE, 2010. https://doi.org/10.1109/ICCAE.2010.5451637.","short":"C. Röcker, in: V. Mahadevan, Z. Jianhong (Eds.), Proceedings of the Second International IEEE Conference on Computer and Automation Engineering (ICCAE’10), IEEE, Piscataway, NJ, 2010, pp. 513–517.","chicago-de":"Röcker, Carsten. 2010. Living and Working in Automated Environments - Evaluating the Concerns of End-Users in Technology-Enhanced Spaces. In: Proceedings of the Second International IEEE Conference on Computer and Automation Engineering (ICCAE’10), hg. von V. Mahadevan und Z. Jianhong, 513–517. Piscataway, NJ: IEEE. doi:10.1109/ICCAE.2010.5451637, .","din1505-2-1":"Röcker, Carsten: Living and Working in Automated Environments - Evaluating the Concerns of End-Users in Technology-Enhanced Spaces. In: Mahadevan, V. ; Jianhong, Z. (Hrsg.): Proceedings of the Second International IEEE Conference on Computer and Automation Engineering (ICCAE’10). Piscataway, NJ : IEEE, 2010, S. 513–517"}},{"corporate_editor":["International Association of Computer Science and Information Technology"],"date_updated":"2023-03-15T13:49:53Z","date_created":"2021-01-21T09:21:22Z","publication_identifier":{"isbn":["9781424481002"],"eisbn":["9781424481019 "]},"publication":"2nd International Conference on Mechanical and Electrical Technology (ICMET), 2010 ","language":[{"iso":"eng"}],"keyword":["Ambient Intelligence","Ubiquitous and Pervasive Computing","User Interface","Intelligent Environments","Human-Computer Interaction","User Study","Evaluation"],"oa":"1","citation":{"van":"Röcker C. Socially Dependent Interaction in Smart Spaces: How the Social Situation Influences the Interaction Style in Computer-Enhanced Environments. In: International Association of Computer Science and Information Technology, editor. 2nd International Conference on Mechanical and Electrical Technology (ICMET), 2010 . Piscataway, NJ: IEEE; 2010. p. 314–8.","ama":"Röcker C. Socially Dependent Interaction in Smart Spaces: How the Social Situation Influences the Interaction Style in Computer-Enhanced Environments. In: International Association of Computer Science and Information Technology, ed. 2nd International Conference on Mechanical and Electrical Technology (ICMET), 2010 . Piscataway, NJ: IEEE; 2010:314-318. doi:10.1109/ICMET.2010.5598371","ufg":"Röcker, Carsten (2010): Socially Dependent Interaction in Smart Spaces: How the Social Situation Influences the Interaction Style in Computer-Enhanced Environments, in: International Association of Computer Science and Information Technology (Hg.): 2nd International Conference on Mechanical and Electrical Technology (ICMET), 2010 , Piscataway, NJ, S. 314–318.","havard":"C. Röcker, Socially Dependent Interaction in Smart Spaces: How the Social Situation Influences the Interaction Style in Computer-Enhanced Environments, in: International Association of Computer Science and Information Technology (Ed.), 2nd International Conference on Mechanical and Electrical Technology (ICMET), 2010 , IEEE, Piscataway, NJ, 2010: pp. 314–318.","bjps":"Röcker C (2010) Socially Dependent Interaction in Smart Spaces: How the Social Situation Influences the Interaction Style in Computer-Enhanced Environments. In International Association of Computer Science and Information Technology (ed.), 2nd International Conference on Mechanical and Electrical Technology (ICMET), 2010 . Piscataway, NJ: IEEE, pp. 314–318.","mla":"Röcker, Carsten. “Socially Dependent Interaction in Smart Spaces: How the Social Situation Influences the Interaction Style in Computer-Enhanced Environments.” 2nd International Conference on Mechanical and Electrical Technology (ICMET), 2010 , edited by International Association of Computer Science and Information Technology, IEEE, 2010, pp. 314–18, doi:10.1109/ICMET.2010.5598371.","apa":"Röcker, C. (2010). Socially Dependent Interaction in Smart Spaces: How the Social Situation Influences the Interaction Style in Computer-Enhanced Environments. In International Association of Computer Science and Information Technology (Ed.), 2nd International Conference on Mechanical and Electrical Technology (ICMET), 2010 (pp. 314–318). Piscataway, NJ: IEEE. https://doi.org/10.1109/ICMET.2010.5598371","ieee":"C. Röcker, “Socially Dependent Interaction in Smart Spaces: How the Social Situation Influences the Interaction Style in Computer-Enhanced Environments,” in 2nd International Conference on Mechanical and Electrical Technology (ICMET), 2010 , Singapore, 2010, pp. 314–318.","chicago":"Röcker, Carsten. “Socially Dependent Interaction in Smart Spaces: How the Social Situation Influences the Interaction Style in Computer-Enhanced Environments.” In 2nd International Conference on Mechanical and Electrical Technology (ICMET), 2010 , edited by International Association of Computer Science and Information Technology, 314–18. Piscataway, NJ: IEEE, 2010. https://doi.org/10.1109/ICMET.2010.5598371.","short":"C. Röcker, in: International Association of Computer Science and Information Technology (Ed.), 2nd International Conference on Mechanical and Electrical Technology (ICMET), 2010 , IEEE, Piscataway, NJ, 2010, pp. 314–318.","din1505-2-1":"Röcker, Carsten: Socially Dependent Interaction in Smart Spaces: How the Social Situation Influences the Interaction Style in Computer-Enhanced Environments. In: International Association of Computer Science and Information Technology (Hrsg.): 2nd International Conference on Mechanical and Electrical Technology (ICMET), 2010 . Piscataway, NJ : IEEE, 2010, S. 314–318","chicago-de":"Röcker, Carsten. 2010. Socially Dependent Interaction in Smart Spaces: How the Social Situation Influences the Interaction Style in Computer-Enhanced Environments. In: 2nd International Conference on Mechanical and Electrical Technology (ICMET), 2010 , hg. von International Association of Computer Science and Information Technology, 314–318. Piscataway, NJ: IEEE. doi:10.1109/ICMET.2010.5598371, ."},"extern":"1","title":"Socially Dependent Interaction in Smart Spaces: How the Social Situation Influences the Interaction Style in Computer-Enhanced Environments","page":"314 - 318","status":"public","main_file_link":[{"open_access":"1"}],"year":2010,"author":[{"last_name":"Röcker","id":"61525","first_name":"Carsten","full_name":"Röcker, Carsten"}],"user_id":"15514","type":"conference","doi":"10.1109/ICMET.2010.5598371","_id":"4491","place":"Piscataway, NJ","publication_status":"published","publisher":"IEEE","abstract":[{"lang":"eng","text":"This paper reports on a cross-national user study exploring the influence of the social work situation on the preferred level of control over IT services in smart office environments. The acceptance of different control mechanisms was tested for representative functionalities with participants from Germany and the USA. The results of the questionnaire-based study show, that the social situation, in which a certain application is used, has a significant effect on the preferred level of user control."}],"conference":{"start_date":"2010-09-10","end_date":"2010-09-12","location":"Singapore","name":"2nd International Conference on Mechanical and Electrical Technology (ICMET), 2010 "},"department":[{"_id":"DEP5023"}]},{"language":[{"iso":"eng"}],"keyword":["Human–Computer Interaction","Usability Engineering","User Interfaces","Elderly People","Older Adults"],"oa":"1","editor":[{"first_name":"K.","full_name":" Miesenberger, K.","last_name":" Miesenberger"},{"full_name":"Klaus, J.","first_name":"J.","last_name":"Klaus"},{"first_name":"W.","last_name":"Zagler","full_name":"Zagler, W."},{"first_name":"A.","last_name":"Karshmer","full_name":"Karshmer, A."}],"date_updated":"2023-03-15T13:49:53Z","date_created":"2021-01-21T09:21:23Z","publication":"Computers Helping People with Special Needs, Part II","publication_identifier":{"eisbn":["978-3-642-14100-3"],"isbn":["978-3-642-14099-0"]},"page":"556-559","status":"public","main_file_link":[{"open_access":"1"}],"author":[{"first_name":"Andreas","full_name":"Holzinger, Andreas","last_name":"Holzinger"},{"last_name":"Ziefle","first_name":"Martina","full_name":"Ziefle, Martina"},{"last_name":"Röcker","first_name":"Carsten","full_name":"Röcker, Carsten","id":"61525"}],"year":2010,"citation":{"short":"A. Holzinger, M. Ziefle, C. Röcker, in: K. Miesenberger, J. Klaus, W. Zagler, A. Karshmer (Eds.), Computers Helping People with Special Needs, Part II, Springer, Berlin, 2010, pp. 556–559.","chicago-de":"Holzinger, Andreas, Martina Ziefle und Carsten Röcker. 2010. Human-Computer Interaction and Usability Engineering for Elderly (HCI4AGING): Introduction to the Special Thematic Session. In: Computers Helping People with Special Needs, Part II, hg. von K. Miesenberger, J. Klaus, W. Zagler, und A. Karshmer, 6180:556–559. Lecture Notes in Computer Science. Berlin: Springer. doi:10.1007/978-3-642-14100-3_83, .","din1505-2-1":"Holzinger, Andreas ; Ziefle, Martina ; Röcker, Carsten: Human-Computer Interaction and Usability Engineering for Elderly (HCI4AGING): Introduction to the Special Thematic Session. In: Miesenberger, K. ; Klaus, J. ; Zagler, W. ; Karshmer, A. (Hrsg.): Computers Helping People with Special Needs, Part II, Lecture Notes in Computer Science. Bd. 6180. Berlin : Springer, 2010, S. 556–559","ama":"Holzinger A, Ziefle M, Röcker C. Human-Computer Interaction and Usability Engineering for Elderly (HCI4AGING): Introduction to the Special Thematic Session. In: Miesenberger K, Klaus J, Zagler W, Karshmer A, eds. Computers Helping People with Special Needs, Part II. Vol 6180. Lecture Notes in Computer Science. Berlin: Springer; 2010:556-559. doi:10.1007/978-3-642-14100-3_83","van":"Holzinger A, Ziefle M, Röcker C. Human-Computer Interaction and Usability Engineering for Elderly (HCI4AGING): Introduction to the Special Thematic Session. In: Miesenberger K, Klaus J, Zagler W, Karshmer A, editors. Computers Helping People with Special Needs, Part II. Berlin: Springer; 2010. p. 556–9. (Lecture Notes in Computer Science; vol. 6180).","havard":"A. Holzinger, M. Ziefle, C. Röcker, Human-Computer Interaction and Usability Engineering for Elderly (HCI4AGING): Introduction to the Special Thematic Session, in: K. Miesenberger, J. Klaus, W. Zagler, A. Karshmer (Eds.), Computers Helping People with Special Needs, Part II, Springer, Berlin, 2010: pp. 556–559.","mla":"Holzinger, Andreas, et al. “Human-Computer Interaction and Usability Engineering for Elderly (HCI4AGING): Introduction to the Special Thematic Session.” Computers Helping People with Special Needs, Part II, edited by K. Miesenberger et al., vol. 6180, Springer, 2010, pp. 556–59, doi:10.1007/978-3-642-14100-3_83.","bjps":"Holzinger A, Ziefle M and Röcker C (2010) Human-Computer Interaction and Usability Engineering for Elderly (HCI4AGING): Introduction to the Special Thematic Session. In Miesenberger K et al. (eds), Computers Helping People with Special Needs, Part II, vol. 6180. Berlin: Springer, pp. 556–559.","ufg":"Holzinger, Andreas et. al. (2010): Human-Computer Interaction and Usability Engineering for Elderly (HCI4AGING): Introduction to the Special Thematic Session, in: K. Miesenberger et. al. (Hgg.): Computers Helping People with Special Needs, Part II (=Lecture Notes in Computer Science 6180), Berlin, S. 556–559.","ieee":"A. Holzinger, M. Ziefle, and C. Röcker, “Human-Computer Interaction and Usability Engineering for Elderly (HCI4AGING): Introduction to the Special Thematic Session,” in Computers Helping People with Special Needs, Part II, Vienna, Austria, 2010, vol. 6180, pp. 556–559.","apa":"Holzinger, A., Ziefle, M., & Röcker, C. (2010). Human-Computer Interaction and Usability Engineering for Elderly (HCI4AGING): Introduction to the Special Thematic Session. In K. Miesenberger, J. Klaus, W. Zagler, & A. Karshmer (Eds.), Computers Helping People with Special Needs, Part II (Vol. 6180, pp. 556–559). Berlin: Springer. https://doi.org/10.1007/978-3-642-14100-3_83","chicago":"Holzinger, Andreas, Martina Ziefle, and Carsten Röcker. “Human-Computer Interaction and Usability Engineering for Elderly (HCI4AGING): Introduction to the Special Thematic Session.” In Computers Helping People with Special Needs, Part II, edited by K. Miesenberger, J. Klaus, W. Zagler, and A. Karshmer, 6180:556–59. Lecture Notes in Computer Science. Berlin: Springer, 2010. https://doi.org/10.1007/978-3-642-14100-3_83."},"volume":6180,"extern":"1","title":"Human-Computer Interaction and Usability Engineering for Elderly (HCI4AGING): Introduction to the Special Thematic Session","doi":"10.1007/978-3-642-14100-3_83","_id":"4492","place":"Berlin","intvolume":" 6180","user_id":"15514","type":"conference","publisher":"Springer","abstract":[{"text":"In most countries demographic developments tend towards more and more elderly people in single households. Improving the quality of life for elderly people is an emerging issue within our information society. Good user interfaces have tremendous implications for appropriate accessibility. Though, user interfaces should not only be easily accessible, they should also be useful, usable and most of all enjoyable and a benefit for people. Traditionally, Human–Computer Interaction (HCI) bridges Natural Sciences (Psychology) and Engineering (Informatics/Computer Science), whilst Usability Engineering (UE) is anchored in Software Technology and supports the actual implemen-tation. Together, HCI and UE have a powerful potential to help towards making technology a little bit more accessible, useful, useable and enjoyable for everybody.","lang":"eng"}],"department":[{"_id":"DEP5023"}],"conference":{"location":"Vienna, Austria","name":"12th International Conference, ICCHP 2010","end_date":"2010-07-16","start_date":"2010-07-14"},"publication_status":"published","series_title":"Lecture Notes in Computer Science"},{"user_id":"15514","intvolume":" 4","type":"journal_article","place":"[S.l.]","doi":"10.5281/zenodo.1063024","_id":"4493","publication_status":"published","publisher":"World Academy of Science, Engineering and Technology, WASET ","department":[{"_id":"DEP5023"}],"issue":"7","abstract":[{"text":"This paper provides an introduction into the evolution of information and communication technology and illustrates its usage in the work domain. The paper is sub-divided into two parts. The first part gives an overview over the different phases of information processing in the work domain. It starts by charting the past and present usage of computers in work environments and shows current technological trends, which are likely to influence future business applications. The second part starts by briefly describing, how the usage of computers changed business processes in the past, and presents first Ambient Intelligence applications based on identification and localization information, which are already used in the production and retail sector. Based on current systems and prototype applications, the paper gives an outlook of how Ambient Intelligence technologies could change business processes in the future. ","lang":"eng"}],"date_updated":"2023-03-15T13:49:53Z","date_created":"2021-01-21T09:21:25Z","publication_identifier":{"eissn":["1307-6892"],"issn":["2010-4057"]},"publication":"International Journal of Information and Communication Engineering","language":[{"iso":"eng"}],"keyword":["Ubiquitous Computing","Ambient intelligence","business applications","Radio Frequency Identification (RFID)"],"oa":"1","citation":{"ieee":"C. Röcker, “Chances and Challenges of Intelligent Technologies in the Production and Retail Sector,” International Journal of Information and Communication Engineering, vol. 4, no. 7, pp. 1830–1841, 2010.","ama":"Röcker C. Chances and Challenges of Intelligent Technologies in the Production and Retail Sector. International Journal of Information and Communication Engineering. 2010;4(7):1830-1841. doi:10.5281/zenodo.1063024","din1505-2-1":"Röcker, Carsten: Chances and Challenges of Intelligent Technologies in the Production and Retail Sector. In: International Journal of Information and Communication Engineering Bd. 4. [S.l.], World Academy of Science, Engineering and Technology, WASET (2010), Nr. 7, S. 1830–1841","chicago-de":"Röcker, Carsten. 2010. Chances and Challenges of Intelligent Technologies in the Production and Retail Sector. International Journal of Information and Communication Engineering 4, Nr. 7: 1830–1841. doi:10.5281/zenodo.1063024, .","short":"C. Röcker, International Journal of Information and Communication Engineering 4 (2010) 1830–1841.","chicago":"Röcker, Carsten. “Chances and Challenges of Intelligent Technologies in the Production and Retail Sector.” International Journal of Information and Communication Engineering 4, no. 7 (2010): 1830–41. https://doi.org/10.5281/zenodo.1063024.","apa":"Röcker, C. (2010). Chances and Challenges of Intelligent Technologies in the Production and Retail Sector. International Journal of Information and Communication Engineering, 4(7), 1830–1841. https://doi.org/10.5281/zenodo.1063024","mla":"Röcker, Carsten. “Chances and Challenges of Intelligent Technologies in the Production and Retail Sector.” International Journal of Information and Communication Engineering, vol. 4, no. 7, World Academy of Science, Engineering and Technology, WASET , 2010, pp. 1830–41, doi:10.5281/zenodo.1063024.","bjps":"Röcker C (2010) Chances and Challenges of Intelligent Technologies in the Production and Retail Sector. International Journal of Information and Communication Engineering 4, 1830–1841.","havard":"C. Röcker, Chances and Challenges of Intelligent Technologies in the Production and Retail Sector, International Journal of Information and Communication Engineering. 4 (2010) 1830–1841.","ufg":"Röcker, Carsten (2010): Chances and Challenges of Intelligent Technologies in the Production and Retail Sector, in: International Journal of Information and Communication Engineering 4 (7), S. 1830–1841.","van":"Röcker C. Chances and Challenges of Intelligent Technologies in the Production and Retail Sector. International Journal of Information and Communication Engineering. 2010;4(7):1830–41."},"volume":4,"extern":"1","title":"Chances and Challenges of Intelligent Technologies in the Production and Retail Sector","page":"1830 - 1841","status":"public","author":[{"last_name":"Röcker","first_name":"Carsten","id":"61525","full_name":"Röcker, Carsten"}],"year":2010,"main_file_link":[{"open_access":"1"}]},{"keyword":["mixed reality","immersive co-location","ambient assisted living","architecture","smart spaces","spatial extension"],"language":[{"iso":"eng"}],"oa":"1","editor":[{"first_name":"J.","last_name":"Bonner,","full_name":"Bonner,, J."},{"first_name":"M.","full_name":"O’Neill, M.","last_name":"O’Neill"},{"last_name":"Mival","first_name":"O.","full_name":"Mival, O."}],"date_updated":"2023-03-15T13:49:53Z","publication":"Proceedings of Create’10 - Innovative Interactions","publication_identifier":{"eisbn":["978-0-9554-2254-6"]},"date_created":"2021-01-21T09:21:26Z","status":"public","page":"40-45","author":[{"full_name":"Kasugai, Kai","first_name":"Kai","last_name":"Kasugai"},{"first_name":"Martina","last_name":"Ziefle","full_name":"Ziefle, Martina"},{"last_name":"Röcker","first_name":"Carsten","full_name":"Röcker, Carsten","id":"61525"},{"last_name":"Russell","first_name":"Peter","full_name":"Russell, Peter"}],"main_file_link":[{"open_access":"1"}],"year":2010,"citation":{"ama":"Kasugai K, Ziefle M, Röcker C, Russell P. Creating Spatio-Temporal Contiguities Between Real and Virtual Rooms in an Assistive Living Environment. In: Bonner, J, O’Neill M, Mival O, eds. Proceedings of Create’10 - Innovative Interactions. ; 2010:40-45. doi:10.14236/ewic/CREATE2010.8","ieee":"K. Kasugai, M. Ziefle, C. Röcker, and P. Russell, “Creating Spatio-Temporal Contiguities Between Real and Virtual Rooms in an Assistive Living Environment,” in Proceedings of Create’10 - Innovative Interactions, Loughborough, UK, 2010, pp. 40–45.","ufg":"Kasugai, Kai et. al. (2010): Creating Spatio-Temporal Contiguities Between Real and Virtual Rooms in an Assistive Living Environment, in: J. Bonner, et. al. (Hgg.): Proceedings of Create’10 - Innovative Interactions, S. 40–45.","mla":"Kasugai, Kai, et al. “Creating Spatio-Temporal Contiguities Between Real and Virtual Rooms in an Assistive Living Environment.” Proceedings of Create’10 - Innovative Interactions, edited by J. Bonner, et al., 2010, pp. 40–45, doi:10.14236/ewic/CREATE2010.8.","bjps":"Kasugai K et al. (2010) Creating Spatio-Temporal Contiguities Between Real and Virtual Rooms in an Assistive Living Environment. In Bonner, J, O’Neill M and Mival O (eds), Proceedings of Create’10 - Innovative Interactions. pp. 40–45.","havard":"K. Kasugai, M. Ziefle, C. Röcker, P. Russell, Creating Spatio-Temporal Contiguities Between Real and Virtual Rooms in an Assistive Living Environment, in: J. Bonner, M. O’Neill, O. Mival (Eds.), Proceedings of Create’10 - Innovative Interactions, 2010: pp. 40–45.","van":"Kasugai K, Ziefle M, Röcker C, Russell P. Creating Spatio-Temporal Contiguities Between Real and Virtual Rooms in an Assistive Living Environment. In: Bonner, J, O’Neill M, Mival O, editors. Proceedings of Create’10 - Innovative Interactions. 2010. p. 40–5.","chicago":"Kasugai, Kai, Martina Ziefle, Carsten Röcker, and Peter Russell. “Creating Spatio-Temporal Contiguities Between Real and Virtual Rooms in an Assistive Living Environment.” In Proceedings of Create’10 - Innovative Interactions, edited by J. Bonner, M. O’Neill, and O. Mival, 40–45, 2010. https://doi.org/10.14236/ewic/CREATE2010.8.","apa":"Kasugai, K., Ziefle, M., Röcker, C., & Russell, P. (2010). Creating Spatio-Temporal Contiguities Between Real and Virtual Rooms in an Assistive Living Environment. In J. Bonner, M. O’Neill, & O. Mival (Eds.), Proceedings of Create’10 - Innovative Interactions (pp. 40–45). Loughborough, UK. https://doi.org/10.14236/ewic/CREATE2010.8","din1505-2-1":"Kasugai, Kai ; Ziefle, Martina ; Röcker, Carsten ; Russell, Peter: Creating Spatio-Temporal Contiguities Between Real and Virtual Rooms in an Assistive Living Environment. In: Bonner, J. ; O’Neill, M. ; Mival, O. (Hrsg.): Proceedings of Create’10 - Innovative Interactions, 2010, S. 40–45","chicago-de":"Kasugai, Kai, Martina Ziefle, Carsten Röcker und Peter Russell. 2010. Creating Spatio-Temporal Contiguities Between Real and Virtual Rooms in an Assistive Living Environment. In: Proceedings of Create’10 - Innovative Interactions, hg. von J. Bonner, M. O’Neill, und O. Mival, 40–45. doi:10.14236/ewic/CREATE2010.8, .","short":"K. Kasugai, M. Ziefle, C. Röcker, P. Russell, in: J. Bonner, M. O’Neill, O. Mival (Eds.), Proceedings of Create’10 - Innovative Interactions, 2010, pp. 40–45."},"title":"Creating Spatio-Temporal Contiguities Between Real and Virtual Rooms in an Assistive Living Environment","extern":"1","_id":"4494","doi":"10.14236/ewic/CREATE2010.8","user_id":"15514","type":"conference","abstract":[{"lang":"eng","text":"This paper gives an overview of how the role of architecture, design, and HCI is to be redefined in a world of ubiquitous computing and the recent advances in display technology. It describes the future care lab and our take on research in this field. We elaborate on how wall-sized displays can form an integral part of an ambient intelligence space that aims to assist the elderly and empower them to stay longer in their familiar surroundings before moving into nursing homes. We propose a classification of different concepts that virtually extend a real environment and describe some possible scenarios."}],"conference":{"location":"Loughborough, UK","name":"Proceedings of Create’10 ","start_date":"2010-06-30","end_date":"2010-07-02"},"department":[{"_id":"DEP5023"}],"publication_status":"published"},{"keyword":["Technology Diffusion","Technology Acceptance Models","Ambient Intelligence","Ubiquitous and Pervasive Computing"],"language":[{"iso":"eng"}],"publication_identifier":{"eissn":["1307-6892"],"eisbn":["978-0-615-41898-8"]},"publication":"Proceedings of the International Conference on Intelligent Systems (ICIS'10), Part 1","date_created":"2021-01-21T09:21:28Z","date_updated":"2023-03-15T13:49:53Z","year":2010,"author":[{"id":"61525","full_name":"Röcker, Carsten","last_name":"Röcker","first_name":"Carsten"}],"status":"public","page":"490 - 496","title":"Why Traditional Technology Acceptance Models Won't Work With Future Information Technologies","extern":"1","citation":{"chicago":"Röcker, Carsten. “Why Traditional Technology Acceptance Models Won’t Work With Future Information Technologies.” In Proceedings of the International Conference on Intelligent Systems (ICIS’10), Part 1, 41:490–96. International Journal of Information and Communication Engineering. [S.l.]: World Academy of Science, Engineering and Technology, WASET, 2010. https://doi.org/10.5281/zenodo.1078965.","apa":"Röcker, C. (2010). Why Traditional Technology Acceptance Models Won’t Work With Future Information Technologies. In Proceedings of the International Conference on Intelligent Systems (ICIS’10), Part 1 (Vol. 41, pp. 490–496). [S.l.]: World Academy of Science, Engineering and Technology, WASET. https://doi.org/10.5281/zenodo.1078965","ufg":"Röcker, Carsten (2010): Why Traditional Technology Acceptance Models Won’t Work With Future Information Technologies, in: Proceedings of the International Conference on Intelligent Systems (ICIS’10), Part 1 (= International Journal of Information and Communication Engineering 41), [S.l.], S. 490–496.","mla":"Röcker, Carsten. “Why Traditional Technology Acceptance Models Won’t Work With Future Information Technologies.” Proceedings of the International Conference on Intelligent Systems (ICIS’10), Part 1, vol. 41, no. 5, World Academy of Science, Engineering and Technology, WASET, 2010, pp. 490–96, doi:10.5281/zenodo.1078965.","bjps":"Röcker C (2010) Why Traditional Technology Acceptance Models Won’t Work With Future Information Technologies. Proceedings of the International Conference on Intelligent Systems (ICIS’10), Part 1, vol. 41. [S.l.]: World Academy of Science, Engineering and Technology, WASET, pp. 490–496.","havard":"C. Röcker, Why Traditional Technology Acceptance Models Won’t Work With Future Information Technologies, in: Proceedings of the International Conference on Intelligent Systems (ICIS’10), Part 1, World Academy of Science, Engineering and Technology, WASET, [S.l.], 2010: pp. 490–496.","van":"Röcker C. Why Traditional Technology Acceptance Models Won’t Work With Future Information Technologies. In: Proceedings of the International Conference on Intelligent Systems (ICIS’10), Part 1. [S.l.]: World Academy of Science, Engineering and Technology, WASET; 2010. p. 490–6. ( International Journal of Information and Communication Engineering; vol. 41).","chicago-de":"Röcker, Carsten. 2010. Why Traditional Technology Acceptance Models Won’t Work With Future Information Technologies. In: Proceedings of the International Conference on Intelligent Systems (ICIS’10), Part 1, 41:490–496. International Journal of Information and Communication Engineering. [S.l.]: World Academy of Science, Engineering and Technology, WASET. doi:10.5281/zenodo.1078965, .","din1505-2-1":"Röcker, Carsten: Why Traditional Technology Acceptance Models Won’t Work With Future Information Technologies. In: Proceedings of the International Conference on Intelligent Systems (ICIS’10), Part 1, International Journal of Information and Communication Engineering. Bd. 41. [S.l.] : World Academy of Science, Engineering and Technology, WASET, 2010, S. 490–496","short":"C. Röcker, in: Proceedings of the International Conference on Intelligent Systems (ICIS’10), Part 1, World Academy of Science, Engineering and Technology, WASET, [S.l.], 2010, pp. 490–496.","ieee":"C. Röcker, “Why Traditional Technology Acceptance Models Won’t Work With Future Information Technologies,” in Proceedings of the International Conference on Intelligent Systems (ICIS’10), Part 1, Tokyo, Japan, 2010, vol. 41, no. 5, pp. 490–496.","ama":"Röcker C. Why Traditional Technology Acceptance Models Won’t Work With Future Information Technologies. In: Proceedings of the International Conference on Intelligent Systems (ICIS’10), Part 1. Vol 41. International Journal of Information and Communication Engineering. [S.l.]: World Academy of Science, Engineering and Technology, WASET; 2010:490-496. doi:10.5281/zenodo.1078965"},"volume":41,"place":"[S.l.]","_id":"4495","doi":"10.5281/zenodo.1078965","type":"conference","user_id":"15514","intvolume":" 41","department":[{"_id":"DEP5023"}],"conference":{"end_date":"2010-05-28","start_date":"2010-05-26","name":" International Conference on Intelligent Systems (ICIS'10)","location":"Tokyo, Japan"},"abstract":[{"text":"This paper illustrates why existing technology acceptance models are only of limited use for predicting and explaining the adoption of future information and communication technologies. It starts with a general overview over technology adoption processes, and presents several theories for the acceptance as well as adoption of traditional information technologies. This is followed by an overview over the recent developments in the area of information and communication technologies. Based on the arguments elaborated in these sections, it is shown why the factors used to predict adoption in existing systems, will not be sufficient for explaining the adoption of future information and communication technologies.","lang":"eng"}],"issue":"5","publisher":"World Academy of Science, Engineering and Technology, WASET","series_title":" International Journal of Information and Communication Engineering","publication_status":"published"},{"publication_status":"published","publisher":"IEEE","conference":{"end_date":"2010-03-25","start_date":"2010-03-22","name":"4th International Conference on Pervasive Computing Technologies for Healthcare, 2010","location":"München, Germany"},"department":[{"_id":"DEP5023"}],"abstract":[{"lang":"eng","text":"While pervasive healthcare systems bear the potential to provide patients with a new quality of medical homecare, the complexity of such systems raises fundamental questions of behavior, communication and technology acceptance. This is especially important, as users of future healthcare systems will be increasingly characterized by diversity. Relying only on highly experienced and technology-prone user groups, which might have been typical users in the last decades, is not sufficient anymore. Rather, elderly users, users with a completely different upbringing and domain knowledge, and ill or handicapped people will have to use the systems. Today, the understanding, in which way physical, emotional and cognitive abilities, caused by individual learning histories and health states, may impact the usage and acceptance of pervasive healthcare technologies, is restricted. This research contributes to this topic by investigating the acceptance motives of aged users with different health states regarding three different implementation concepts for medical technologies: medical technology implemented in mobile devices, smart environments and smart clothing. Using the questionnaire method, a total of 82 users between 40 and 92 years of age were examined regarding their usage motives and barriers with respect to the different technology concepts. Overall, it was revealed that acceptance issues and users' needs and wants should be considered in order to successfully design new medical technologies."}],"user_id":"15514","type":"conference","place":"Piscataway, NJ","doi":"10.4108/ICST.PERVASIVEHEALTH2010.8915","_id":"4496","citation":{"chicago-de":"Ziefle, Martina und Carsten Röcker. 2010. Acceptance of Pervasive Healthcare Systems: A Comparison of Different Implementation Concepts. In: Proceedings of the 4th International ICST Conference on Pervasive Computing Technologies for Healthcare (PervasiveHealth’10), Munich, Germany, March 22-25, CD-ROM. Piscataway, NJ: IEEE. doi:10.4108/ICST.PERVASIVEHEALTH2010.8915, .","din1505-2-1":"Ziefle, Martina ; Röcker, Carsten: Acceptance of Pervasive Healthcare Systems: A Comparison of Different Implementation Concepts. In: Proceedings of the 4th International ICST Conference on Pervasive Computing Technologies for Healthcare (PervasiveHealth’10), Munich, Germany, March 22-25, CD-ROM. Piscataway, NJ : IEEE, 2010","short":"M. Ziefle, C. Röcker, in: Proceedings of the 4th International ICST Conference on Pervasive Computing Technologies for Healthcare (PervasiveHealth’10), Munich, Germany, March 22-25, CD-ROM, IEEE, Piscataway, NJ, 2010.","chicago":"Ziefle, Martina, and Carsten Röcker. “Acceptance of Pervasive Healthcare Systems: A Comparison of Different Implementation Concepts.” In Proceedings of the 4th International ICST Conference on Pervasive Computing Technologies for Healthcare (PervasiveHealth’10), Munich, Germany, March 22-25, CD-ROM. Piscataway, NJ: IEEE, 2010. https://doi.org/10.4108/ICST.PERVASIVEHEALTH2010.8915.","apa":"Ziefle, M., & Röcker, C. (2010). Acceptance of Pervasive Healthcare Systems: A Comparison of Different Implementation Concepts. In Proceedings of the 4th International ICST Conference on Pervasive Computing Technologies for Healthcare (PervasiveHealth’10), Munich, Germany, March 22-25, CD-ROM. Piscataway, NJ: IEEE. https://doi.org/10.4108/ICST.PERVASIVEHEALTH2010.8915","mla":"Ziefle, Martina, and Carsten Röcker. “Acceptance of Pervasive Healthcare Systems: A Comparison of Different Implementation Concepts.” Proceedings of the 4th International ICST Conference on Pervasive Computing Technologies for Healthcare (PervasiveHealth’10), Munich, Germany, March 22-25, CD-ROM, IEEE, 2010, doi:10.4108/ICST.PERVASIVEHEALTH2010.8915.","havard":"M. Ziefle, C. Röcker, Acceptance of Pervasive Healthcare Systems: A Comparison of Different Implementation Concepts, in: Proceedings of the 4th International ICST Conference on Pervasive Computing Technologies for Healthcare (PervasiveHealth’10), Munich, Germany, March 22-25, CD-ROM, IEEE, Piscataway, NJ, 2010.","bjps":"Ziefle M and Röcker C (2010) Acceptance of Pervasive Healthcare Systems: A Comparison of Different Implementation Concepts. Proceedings of the 4th International ICST Conference on Pervasive Computing Technologies for Healthcare (PervasiveHealth’10), Munich, Germany, March 22-25, CD-ROM. Piscataway, NJ: IEEE.","ufg":"Ziefle, Martina/Röcker, Carsten (2010): Acceptance of Pervasive Healthcare Systems: A Comparison of Different Implementation Concepts, in: Proceedings of the 4th International ICST Conference on Pervasive Computing Technologies for Healthcare (PervasiveHealth’10), Munich, Germany, March 22-25, CD-ROM, Piscataway, NJ.","van":"Ziefle M, Röcker C. Acceptance of Pervasive Healthcare Systems: A Comparison of Different Implementation Concepts. In: Proceedings of the 4th International ICST Conference on Pervasive Computing Technologies for Healthcare (PervasiveHealth’10), Munich, Germany, March 22-25, CD-ROM. Piscataway, NJ: IEEE; 2010.","ieee":"M. Ziefle and C. Röcker, “Acceptance of Pervasive Healthcare Systems: A Comparison of Different Implementation Concepts,” in Proceedings of the 4th International ICST Conference on Pervasive Computing Technologies for Healthcare (PervasiveHealth’10), Munich, Germany, March 22-25, CD-ROM, München, Germany, 2010.","ama":"Ziefle M, Röcker C. Acceptance of Pervasive Healthcare Systems: A Comparison of Different Implementation Concepts. In: Proceedings of the 4th International ICST Conference on Pervasive Computing Technologies for Healthcare (PervasiveHealth’10), Munich, Germany, March 22-25, CD-ROM. Piscataway, NJ: IEEE; 2010. doi:10.4108/ICST.PERVASIVEHEALTH2010.8915"},"extern":"1","title":"Acceptance of Pervasive Healthcare Systems: A Comparison of Different Implementation Concepts","status":"public","main_file_link":[{"open_access":"1"}],"year":2010,"author":[{"full_name":"Ziefle, Martina","last_name":"Ziefle","first_name":"Martina"},{"first_name":"Carsten","full_name":"Röcker, Carsten","last_name":"Röcker"}],"date_updated":"2023-03-15T13:49:53Z","date_created":"2021-01-21T09:21:29Z","publication":"Proceedings of the 4th International ICST Conference on Pervasive Computing Technologies for Healthcare (PervasiveHealth’10), Munich, Germany, March 22-25, CD-ROM","publication_identifier":{"eisbn":["978-963-9799-89-9"]},"language":[{"iso":"eng"}],"keyword":["Pervasive and Ubiquitous Computing","AmbientAssisted Living","Technology Acceptance","Health Study"],"oa":"1"},{"date_created":"2021-01-21T09:21:30Z","publication":"Computational Science and Its Applications – ICCSA 2010","publication_identifier":{"isbn":["978-3-642-12188-3"],"eisbn":["978-3-642-12189-0"]},"date_updated":"2023-03-15T13:49:53Z","editor":[{"last_name":"Taniar","first_name":"David ","full_name":"Taniar, David "},{"last_name":"Gervasi","first_name":"Osvaldo ","full_name":"Gervasi, Osvaldo "},{"first_name":"Beniamino ","last_name":"Murgante","full_name":"Murgante, Beniamino "},{"first_name":"Eric ","full_name":"Pardede, Eric ","last_name":"Pardede"},{"first_name":"Bernady O. ","last_name":"Apduhan","full_name":"Apduhan, Bernady O. "}],"oa":"1","language":[{"iso":"eng"}],"keyword":["Context-Awareness","Privacy","Ubiquitous Computing","Pervasive Computing","Ambient Intelligence","Evaluation","Technology Acceptance"],"extern":"1","title":"Information Privacy in Smart Office Environments: A Cross-Study Analyzing the Willingness of Users to Share Context Information","volume":6019,"citation":{"ieee":"C. Röcker, “Information Privacy in Smart Office Environments: A Cross-Study Analyzing the Willingness of Users to Share Context Information,” in Computational Science and Its Applications – ICCSA 2010, Fukuoka, Japan, 2010, vol. 6019, pp. 93–106.","ama":"Röcker C. Information Privacy in Smart Office Environments: A Cross-Study Analyzing the Willingness of Users to Share Context Information. In: Taniar D, Gervasi O, Murgante B, Pardede E, Apduhan BO, eds. Computational Science and Its Applications – ICCSA 2010. Vol 6019. Lecture Notes in Computer Science. Berlin: Springer; 2010:93-106. doi:10.1007/978-3-642-12189-0_9","din1505-2-1":"Röcker, Carsten: Information Privacy in Smart Office Environments: A Cross-Study Analyzing the Willingness of Users to Share Context Information. In: Taniar, D. ; Gervasi, O. ; Murgante, B. ; Pardede, E. ; Apduhan, B. O. (Hrsg.): Computational Science and Its Applications – ICCSA 2010, Lecture Notes in Computer Science. Bd. 6019. Berlin : Springer, 2010, S. 93–106","chicago-de":"Röcker, Carsten. 2010. Information Privacy in Smart Office Environments: A Cross-Study Analyzing the Willingness of Users to Share Context Information. In: Computational Science and Its Applications – ICCSA 2010, hg. von David Taniar, Osvaldo Gervasi, Beniamino Murgante, Eric Pardede, und Bernady O. Apduhan, 6019:93–106. Lecture Notes in Computer Science. Berlin: Springer. doi:10.1007/978-3-642-12189-0_9, .","short":"C. Röcker, in: D. Taniar, O. Gervasi, B. Murgante, E. Pardede, B.O. Apduhan (Eds.), Computational Science and Its Applications – ICCSA 2010, Springer, Berlin, 2010, pp. 93–106.","chicago":"Röcker, Carsten. “Information Privacy in Smart Office Environments: A Cross-Study Analyzing the Willingness of Users to Share Context Information.” In Computational Science and Its Applications – ICCSA 2010, edited by David Taniar, Osvaldo Gervasi, Beniamino Murgante, Eric Pardede, and Bernady O. Apduhan, 6019:93–106. Lecture Notes in Computer Science. Berlin: Springer, 2010. https://doi.org/10.1007/978-3-642-12189-0_9.","apa":"Röcker, C. (2010). Information Privacy in Smart Office Environments: A Cross-Study Analyzing the Willingness of Users to Share Context Information. In D. Taniar, O. Gervasi, B. Murgante, E. Pardede, & B. O. Apduhan (Eds.), Computational Science and Its Applications – ICCSA 2010 (Vol. 6019, pp. 93–106). Berlin: Springer. https://doi.org/10.1007/978-3-642-12189-0_9","havard":"C. Röcker, Information Privacy in Smart Office Environments: A Cross-Study Analyzing the Willingness of Users to Share Context Information, in: D. Taniar, O. Gervasi, B. Murgante, E. Pardede, B.O. Apduhan (Eds.), Computational Science and Its Applications – ICCSA 2010, Springer, Berlin, 2010: pp. 93–106.","mla":"Röcker, Carsten. “Information Privacy in Smart Office Environments: A Cross-Study Analyzing the Willingness of Users to Share Context Information.” Computational Science and Its Applications – ICCSA 2010, edited by David Taniar et al., vol. 6019, Springer, 2010, pp. 93–106, doi:10.1007/978-3-642-12189-0_9.","bjps":"Röcker C (2010) Information Privacy in Smart Office Environments: A Cross-Study Analyzing the Willingness of Users to Share Context Information. In Taniar D et al. (eds), Computational Science and Its Applications – ICCSA 2010, vol. 6019. Berlin: Springer, pp. 93–106.","ufg":"Röcker, Carsten (2010): Information Privacy in Smart Office Environments: A Cross-Study Analyzing the Willingness of Users to Share Context Information, in: David Taniar et. al. (Hgg.): Computational Science and Its Applications – ICCSA 2010 (=Lecture Notes in Computer Science 6019), Berlin, S. 93–106.","van":"Röcker C. Information Privacy in Smart Office Environments: A Cross-Study Analyzing the Willingness of Users to Share Context Information. In: Taniar D, Gervasi O, Murgante B, Pardede E, Apduhan BO, editors. Computational Science and Its Applications – ICCSA 2010. Berlin: Springer; 2010. p. 93–106. (Lecture Notes in Computer Science; vol. 6019)."},"main_file_link":[{"open_access":"1"}],"author":[{"last_name":"Röcker","full_name":"Röcker, Carsten","id":"61525","first_name":"Carsten"}],"year":2010,"page":"93-106","status":"public","type":"conference","user_id":"15514","intvolume":" 6019","place":"Berlin","doi":"10.1007/978-3-642-12189-0_9","_id":"4497","series_title":"Lecture Notes in Computer Science","publication_status":"published","department":[{"_id":"DEP5023"}],"conference":{"name":" ICCSA 2010: International Conference on Computational Science and Its Applications","location":"Fukuoka, Japan","start_date":"2010-0323","end_date":"2010-03-26"},"abstract":[{"text":"This paper presents a cross-cultural study analyzing the willingness of users to share context information in work environments. The focus of the study is on three aspects: the general willingness to provide different types of context information, the acceptance of manual and automated data capturing mechanisms and the identification of personal and cultural differences among users. The results of the study show that potential users are rather reluctant to provide context information, especially if the data is automatically captured by the system, and that the willingness to provide context information differs significantly between user groups with different cultural backgrounds and different degrees of computer knowledge.","lang":"eng"}],"publisher":"Springer"},{"_id":"4498","doi":"10.5281/zenodo.1078843","keyword":["Ubiquitous Computing","Ambient intelligence","Smart Office Environment","Application Scenarios"],"language":[{"iso":"eng"}],"user_id":"15514","date_updated":"2023-03-15T13:49:53Z","publication":"Proceedings of the International Conference on Computer and Information Technology (ICCIT'10)","date_created":"2021-01-21T09:21:32Z","type":"conference","status":"public","page":"35-401","abstract":[{"lang":"eng","text":"This paper reports on a survey of state-of-the-art application scenarios for smart office environments. Based on an analysis of ongoing research activities and industry projects, functionalities and services of future office systems are extracted. In a second step, these results are used to identify the key characteristics of emerging products. "}],"year":2010,"author":[{"id":"61525","first_name":"Carsten","last_name":"Röcker","full_name":"Röcker, Carsten"}],"conference":{"name":"13th International Conference on Computer and Information Technology (ICCIT'10)","location":"Cape Town, South Africa","end_date":"2010-01-29","start_date":"2010-01-27"},"department":[{"_id":"DEP5023"}],"citation":{"bjps":"Röcker C (2010) Services and Applications for Smart Office Environments - A Survey of State-of-the-Art Usage Scenarios. Proceedings of the International Conference on Computer and Information Technology (ICCIT’10). pp. 35–401.","mla":"Röcker, Carsten. “Services and Applications for Smart Office Environments - A Survey of State-of-the-Art Usage Scenarios.” Proceedings of the International Conference on Computer and Information Technology (ICCIT’10), 2010, pp. 35–401, doi:10.5281/zenodo.1078843.","havard":"C. Röcker, Services and Applications for Smart Office Environments - A Survey of State-of-the-Art Usage Scenarios, in: Proceedings of the International Conference on Computer and Information Technology (ICCIT’10), 2010: pp. 35–401.","ufg":"Röcker, Carsten (2010): Services and Applications for Smart Office Environments - A Survey of State-of-the-Art Usage Scenarios, in: Proceedings of the International Conference on Computer and Information Technology (ICCIT’10), S. 35–401.","van":"Röcker C. Services and Applications for Smart Office Environments - A Survey of State-of-the-Art Usage Scenarios. In: Proceedings of the International Conference on Computer and Information Technology (ICCIT’10). 2010. p. 35–401.","chicago":"Röcker, Carsten. “Services and Applications for Smart Office Environments - A Survey of State-of-the-Art Usage Scenarios.” In Proceedings of the International Conference on Computer and Information Technology (ICCIT’10), 35–401, 2010. https://doi.org/10.5281/zenodo.1078843.","apa":"Röcker, C. (2010). Services and Applications for Smart Office Environments - A Survey of State-of-the-Art Usage Scenarios. In Proceedings of the International Conference on Computer and Information Technology (ICCIT’10) (pp. 35–401). Cape Town, South Africa. https://doi.org/10.5281/zenodo.1078843","chicago-de":"Röcker, Carsten. 2010. Services and Applications for Smart Office Environments - A Survey of State-of-the-Art Usage Scenarios. In: Proceedings of the International Conference on Computer and Information Technology (ICCIT’10), 35–401. doi:10.5281/zenodo.1078843, .","din1505-2-1":"Röcker, Carsten: Services and Applications for Smart Office Environments - A Survey of State-of-the-Art Usage Scenarios. In: Proceedings of the International Conference on Computer and Information Technology (ICCIT’10), 2010, S. 35–401","short":"C. Röcker, in: Proceedings of the International Conference on Computer and Information Technology (ICCIT’10), 2010, pp. 35–401.","ama":"Röcker C. Services and Applications for Smart Office Environments - A Survey of State-of-the-Art Usage Scenarios. In: Proceedings of the International Conference on Computer and Information Technology (ICCIT’10). ; 2010:35-401. doi:10.5281/zenodo.1078843","ieee":"C. Röcker, “Services and Applications for Smart Office Environments - A Survey of State-of-the-Art Usage Scenarios,” in Proceedings of the International Conference on Computer and Information Technology (ICCIT’10), Cape Town, South Africa, 2010, pp. 35–401."},"publication_status":"published","title":"Services and Applications for Smart Office Environments - A Survey of State-of-the-Art Usage Scenarios","extern":"1"},{"language":[{"iso":"ger"}],"oa":"1","date_updated":"2023-03-15T13:49:53Z","related_material":{"link":[{"url":"https://www.researchgate.net/profile/Eva-Maria_Jakobs/publication/237006817_A_Personal_Assistance_System_for_Older_Users_with_Chronic_Heart_Diseases/links/00b4951adbafc62d74000000/A-Personal-Assistance-System-for-Older-Users-with-Chronic-Heart-Diseases.pdfzuAhVEuqQKHeMFBDcQFjAFegQICRAC&url=https%3A%2F%2Fwww.th-owl.de%2Ffiles%2Fwebs%2Feecs%2Flabor%2Fhci%2Fpublications%2F2010%2FAAL_2010a.pdf&usg=AOvVaw1wiikIeUMZxA5Ad_BdGuYX","relation":"original"}]},"publication_identifier":{"isbn":["978-3-8007-3209-8"]},"publication":"Ambient assisted living : Tagungsbandbeiträge / 3. Deutscher AAL-Kongress mit Ausstellung Assistenzsysteme im Dienste des Menschen - Zuhause und Unterwegs","date_created":"2021-01-21T09:21:33Z","status":"public","year":2010,"main_file_link":[{"open_access":"1","url":"https://www.vde-verlag.de/proceedings-de/453209002.html"}],"author":[{"full_name":"Klack, Lars","first_name":"Lars","last_name":"Klack"},{"first_name":"Kai","last_name":"Kasugai","full_name":"Kasugai, Kai"},{"full_name":"Schmitz-Rohde, Thomas","first_name":"Thomas","last_name":"Schmitz-Rohde"},{"id":"61525","last_name":"Röcker","full_name":"Röcker, Carsten","first_name":"Carsten"},{"full_name":"Ziefle, Martina","first_name":"Martina","last_name":"Ziefle"},{"first_name":"Christian","last_name":"Möllering","full_name":"Möllering, Christian"},{"full_name":"Jakobs, Eva-Maria","first_name":"Eva-Maria","last_name":"Jakobs"},{"first_name":"Peter","last_name":"Russell","full_name":"Russell, Peter"},{"last_name":"Borchers","first_name":"Jan","full_name":"Borchers, Jan"}],"citation":{"chicago":"Klack, Lars, Kai Kasugai, Thomas Schmitz-Rohde, Carsten Röcker, Martina Ziefle, Christian Möllering, Eva-Maria Jakobs, Peter Russell, and Jan Borchers. “Ein persönliches Assistenzsystem für ältere Nutzer mit chronischen Herzerkrankungen.” In Ambient assisted living : Tagungsbandbeiträge / 3. Deutscher AAL-Kongress mit Ausstellung Assistenzsysteme im Dienste des Menschen - Zuhause und Unterwegs. Berlin: VDE-Verl. , 2010.","apa":"Klack, L., Kasugai, K., Schmitz-Rohde, T., Röcker, C., Ziefle, M., Möllering, C., … Borchers, J. (2010). Ein persönliches Assistenzsystem für ältere Nutzer mit chronischen Herzerkrankungen. In Ambient assisted living : Tagungsbandbeiträge / 3. Deutscher AAL-Kongress mit Ausstellung Assistenzsysteme im Dienste des Menschen - Zuhause und Unterwegs. Berlin: VDE-Verl. .","ufg":"Klack, Lars et. al. (2010): Ein persönliches Assistenzsystem für ältere Nutzer mit chronischen Herzerkrankungen, in: Ambient assisted living : Tagungsbandbeiträge / 3. Deutscher AAL-Kongress mit Ausstellung Assistenzsysteme im Dienste des Menschen - Zuhause und Unterwegs, Berlin.","havard":"L. Klack, K. Kasugai, T. Schmitz-Rohde, C. Röcker, M. Ziefle, C. Möllering, E.-M. Jakobs, P. Russell, J. Borchers, Ein persönliches Assistenzsystem für ältere Nutzer mit chronischen Herzerkrankungen, in: Ambient assisted living : Tagungsbandbeiträge / 3. Deutscher AAL-Kongress mit Ausstellung Assistenzsysteme im Dienste des Menschen - Zuhause und Unterwegs, VDE-Verl. , Berlin, 2010.","bjps":"Klack L et al. (2010) Ein persönliches Assistenzsystem für ältere Nutzer mit chronischen Herzerkrankungen. Ambient assisted living : Tagungsbandbeiträge / 3. Deutscher AAL-Kongress mit Ausstellung Assistenzsysteme im Dienste des Menschen - Zuhause und Unterwegs. Berlin: VDE-Verl. .","mla":"Klack, Lars, et al. “Ein persönliches Assistenzsystem für ältere Nutzer mit chronischen Herzerkrankungen.” Ambient assisted living : Tagungsbandbeiträge / 3. Deutscher AAL-Kongress mit Ausstellung Assistenzsysteme im Dienste des Menschen - Zuhause und Unterwegs, VDE-Verl. , 2010.","van":"Klack L, Kasugai K, Schmitz-Rohde T, Röcker C, Ziefle M, Möllering C, et al. Ein persönliches Assistenzsystem für ältere Nutzer mit chronischen Herzerkrankungen. In: Ambient assisted living : Tagungsbandbeiträge / 3 Deutscher AAL-Kongress mit Ausstellung Assistenzsysteme im Dienste des Menschen - Zuhause und Unterwegs. Berlin: VDE-Verl. ; 2010.","chicago-de":"Klack, Lars, Kai Kasugai, Thomas Schmitz-Rohde, Carsten Röcker, Martina Ziefle, Christian Möllering, Eva-Maria Jakobs, Peter Russell und Jan Borchers. 2010. Ein persönliches Assistenzsystem für ältere Nutzer mit chronischen Herzerkrankungen. In: Ambient assisted living : Tagungsbandbeiträge / 3. Deutscher AAL-Kongress mit Ausstellung Assistenzsysteme im Dienste des Menschen - Zuhause und Unterwegs. Berlin: VDE-Verl. .","din1505-2-1":"Klack, Lars ; Kasugai, Kai ; Schmitz-Rohde, Thomas ; Röcker, Carsten ; Ziefle, Martina ; Möllering, Christian ; Jakobs, Eva-Maria ; Russell, Peter ; u. a.: Ein persönliches Assistenzsystem für ältere Nutzer mit chronischen Herzerkrankungen. In: Ambient assisted living : Tagungsbandbeiträge / 3. Deutscher AAL-Kongress mit Ausstellung Assistenzsysteme im Dienste des Menschen - Zuhause und Unterwegs. Berlin : VDE-Verl. , 2010","short":"L. Klack, K. Kasugai, T. Schmitz-Rohde, C. Röcker, M. Ziefle, C. Möllering, E.-M. Jakobs, P. Russell, J. Borchers, in: Ambient assisted living : Tagungsbandbeiträge / 3. Deutscher AAL-Kongress mit Ausstellung Assistenzsysteme im Dienste des Menschen - Zuhause und Unterwegs, VDE-Verl. , Berlin, 2010.","ieee":"L. Klack et al., “Ein persönliches Assistenzsystem für ältere Nutzer mit chronischen Herzerkrankungen,” in Ambient assisted living : Tagungsbandbeiträge / 3. Deutscher AAL-Kongress mit Ausstellung Assistenzsysteme im Dienste des Menschen - Zuhause und Unterwegs, Berlin, 2010.","ama":"Klack L, Kasugai K, Schmitz-Rohde T, et al. Ein persönliches Assistenzsystem für ältere Nutzer mit chronischen Herzerkrankungen. In: Ambient assisted living : Tagungsbandbeiträge / 3. Deutscher AAL-Kongress mit Ausstellung Assistenzsysteme im Dienste des Menschen - Zuhause und Unterwegs. Berlin: VDE-Verl. ; 2010."},"title":"Ein persönliches Assistenzsystem für ältere Nutzer mit chronischen Herzerkrankungen","extern":"1","place":"Berlin","_id":"4499","alternative_title":["A Personal Assistance System for Older Users with Chronic Heart Diseases"],"user_id":"15514","type":"conference","publisher":"VDE-Verl. ","conference":{"location":"Berlin","name":"3. Deutscher AAL-Kongress mit Ausstellung Assistenzsysteme im Dienste des Menschen - Zuhause und Unterwegs","end_date":"2010-01-27","start_date":"2010-01-26"},"department":[{"_id":"DEP5023"}],"abstract":[{"text":"Dieser Beitrag beschreibt das Programm „eHealth – Enhancing Mobility with Aging“, ein interdisziplinäres For-\r\nschungsprojekt an der RWTH Aachen, dessen Schwerpunkt auf der Konzeption, Entwicklung und dem Design adaptiver, in das häusliche Umfeld integrierbarer medizinischer Assistenzsysteme liegt. Die Vision des Projektes ist die eines umfassenden, vielschichtigen, persönlichen Assistenzsystems, welches Patienten mit zunehmendem Alter in die Lage versetzen soll, ihre Mobilität und Unabhängigkeit auch im hohen Alter und trotz chronischer Erkrankungen (Fokus auf Erkrankungen des Herz-Kreislaufsystems) beizubehalten. Ziel des Projektes ist die systematische Analyse und Optimierung einer technischen Systemlösung, bei der medizinische, technische, aber auch kommunikative, psychologische, soziale und architektonische Komponenten gleichermaßen berücksichtigt werden und in ihren Auswirkungen auf die Anforderungen für das Design, die Nutzung und Akzeptanz medizinischer Assistenzsysteme untersucht werden. ","lang":"ger"},{"text":"The paper describes the program ‘eHealth – Enhancing Mobility with Aging’, an interdisciplinary research project at RWTH Aachen University, which aims at designing adaptive immersive interfaces for personal healthcare systems. The vision of the project is the development of holistic, multi-level, personal assistance system, which enables elderly patients to maintain their mobility and independence despite their chronic diseases (focus on heart related diseases) and advanced age. The main issues addressed within the project are the systematic evaluation and consecutive optimization of the interrelation of medical, environmental, technical, communicative, psychological, and social factors and their consequences for the design, architecture, use and acceptance of personal healthcare systems. ","lang":"eng"}],"publication_status":"published"},{"author":[{"id":"61525","last_name":"Röcker","full_name":"Röcker, Carsten","first_name":"Carsten"}],"year":2010,"main_file_link":[{"open_access":"1"}],"page":"pp. 61 - 68","status":"public","extern":"1","title":"Social and Technological Concerns Associated with the Usage of Ubiquitous Computing Technologies","citation":{"short":"C. Röcker, Issues in Information Systems : IIS / International Association Für Computer Information Systems, IACIS 11 (2010) 61–68.","din1505-2-1":"Röcker, Carsten: Social and Technological Concerns Associated with the Usage of Ubiquitous Computing Technologies. In: Issues in information systems : IIS / International Association für Computer Information Systems, IACIS Bd. 11. [S.l.] (2010), Nr. 1, S. 61–68","chicago-de":"Röcker, Carsten. 2010. Social and Technological Concerns Associated with the Usage of Ubiquitous Computing Technologies. Issues in information systems : IIS / International Association für Computer Information Systems, IACIS 11, Nr. 1: 61–68. doi:10.48009/1_iis_2010_61-68, .","apa":"Röcker, C. (2010). Social and Technological Concerns Associated with the Usage of Ubiquitous Computing Technologies. Issues in Information Systems : IIS / International Association Für Computer Information Systems, IACIS , 11(1), 61–68. https://doi.org/10.48009/1_iis_2010_61-68","chicago":"Röcker, Carsten. “Social and Technological Concerns Associated with the Usage of Ubiquitous Computing Technologies.” Issues in Information Systems : IIS / International Association Für Computer Information Systems, IACIS 11, no. 1 (2010): 61–68. https://doi.org/10.48009/1_iis_2010_61-68.","van":"Röcker C. Social and Technological Concerns Associated with the Usage of Ubiquitous Computing Technologies. Issues in information systems : IIS / International Association für Computer Information Systems, IACIS . 2010;11(1):61–8.","ufg":"Röcker, Carsten (2010): Social and Technological Concerns Associated with the Usage of Ubiquitous Computing Technologies, in: Issues in information systems : IIS / International Association für Computer Information Systems, IACIS 11 (1), S. 61–68.","mla":"Röcker, Carsten. “Social and Technological Concerns Associated with the Usage of Ubiquitous Computing Technologies.” Issues in Information Systems : IIS / International Association Für Computer Information Systems, IACIS , vol. 11, no. 1, 2010, pp. 61–68, doi:10.48009/1_iis_2010_61-68.","bjps":"Röcker C (2010) Social and Technological Concerns Associated with the Usage of Ubiquitous Computing Technologies. Issues in information systems : IIS / International Association für Computer Information Systems, IACIS 11, 61–68.","havard":"C. Röcker, Social and Technological Concerns Associated with the Usage of Ubiquitous Computing Technologies, Issues in Information Systems : IIS / International Association Für Computer Information Systems, IACIS . 11 (2010) 61–68.","ieee":"C. Röcker, “Social and Technological Concerns Associated with the Usage of Ubiquitous Computing Technologies,” Issues in information systems : IIS / International Association für Computer Information Systems, IACIS , vol. 11, no. 1, pp. 61–68, 2010.","ama":"Röcker C. Social and Technological Concerns Associated with the Usage of Ubiquitous Computing Technologies. Issues in information systems : IIS / International Association für Computer Information Systems, IACIS . 2010;11(1):61-68. doi:10.48009/1_iis_2010_61-68"},"volume":11,"oa":"1","language":[{"iso":"eng"}],"keyword":["Ubiquitous and Pervasive Computing","Ambient Intelligence","Human Factors","Technology Acceptance","User Requirements"],"date_created":"2021-01-21T09:21:34Z","publication":"Issues in information systems : IIS / International Association für Computer Information Systems, IACIS ","publication_identifier":{"issn":["1529-7314 "]},"date_updated":"2023-03-15T13:49:53Z","abstract":[{"lang":"eng","text":"This paper identifies social and technological concerns, which are likely to emerge through the integration of Ubiquitous Computing technologies in future work environments. The concerns presented in this paper were collected by reviewing relevant literature from different research domains and are clustered into two groups. The first group of concerns concentrates on the violation of individual user privacy and the consequences, which arise from these privacy breaches. The second group addresses environmental and societal transformation processes caused by a large-scale penetration of future information and communication technologies into everyday life. "}],"issue":"1","department":[{"_id":"DEP5023"}],"publication_status":"published","doi":"10.48009/1_iis_2010_61-68","_id":"4500","place":"[S.l.]","type":"journal_article","intvolume":" 11","user_id":"15514"},{"keyword":["Ambient Intelligence","Ambient Assisted Livin","Ubiquitous Computing","User Interfaces","User-Centered Design","User Study"],"language":[{"iso":"eng"}],"_id":"4501","oa":"1","user_id":"15514","related_material":{"link":[{"relation":"research_paper","url":"https://scholar.google.de/scholar?oi=bibs&cluster=1985369568332797942&btnI=1&hl=hu"}]},"date_updated":"2023-03-15T13:49:53Z","publication":"Proceedings of the 18th Biennial Conference of the International Communications Society: Culture, Communication and the Cutting Edge of Technology","type":"conference","date_created":"2021-01-21T09:21:36Z","status":"public","main_file_link":[{"open_access":"1"}],"year":2010,"author":[{"first_name":"Carsten","full_name":"Röcker, Carsten","last_name":"Röcker","id":"61525"},{"first_name":"Wiktoria","last_name":"Wilkowska","full_name":"Wilkowska, Wiktoria"},{"full_name":"Ziefle, Martina","first_name":"Martina","last_name":"Ziefle"},{"first_name":"Kai","full_name":"Kasugai, Kai","last_name":"Kasugai"},{"first_name":"Lars","full_name":"Klack, Lars","last_name":"Klack"},{"last_name":"Möllering","first_name":"Christian","full_name":"Möllering, Christian"},{"first_name":"Shirley","full_name":"Beul, Shirley","last_name":"Beul"}],"department":[{"_id":"DEP5023"}],"conference":{"end_date":"2010-06-30","start_date":"2010--06-27","name":"18th Biennial Conference of the International Communications Society: Culture, Communication and the Cutting Edge of Technology","location":"Tokyo, Japan"},"abstract":[{"lang":"eng","text":"This paper describes first steps in the design process of an open and integrative test bed for studying the acceptance of Ambient Assisted Living technologies. The research work reported in this paper was conducted within the project “eHealth - Enhancing Mobility with Aging”, an interdisciplinary research project funded by the Excellence Initiative of the German Federal and State Governments. In the first part of the paper, several formative studies are described, which were conducted in order to analyze personal and medical needs of potential end users, as well as the habits they have in dealing with their illnesses. The insights gained in these studies were used to define fundamental requirements for the design of an intelligent home environment. The second part of the paper shows how the concept was realized and presents several technical prototypes of intelligent home components."}],"citation":{"ama":"Röcker C, Wilkowska W, Ziefle M, et al. Towards Adaptive Interfaces for Supporting Elderly Users in Technology-Enhanced Home Environments. In: Proceedings of the 18th Biennial Conference of the International Communications Society: Culture, Communication and the Cutting Edge of Technology. ; 2010.","van":"Röcker C, Wilkowska W, Ziefle M, Kasugai K, Klack L, Möllering C, et al. Towards Adaptive Interfaces for Supporting Elderly Users in Technology-Enhanced Home Environments. In: Proceedings of the 18th Biennial Conference of the International Communications Society: Culture, Communication and the Cutting Edge of Technology. 2010.","havard":"C. Röcker, W. Wilkowska, M. Ziefle, K. Kasugai, L. Klack, C. Möllering, S. Beul, Towards Adaptive Interfaces for Supporting Elderly Users in Technology-Enhanced Home Environments, in: Proceedings of the 18th Biennial Conference of the International Communications Society: Culture, Communication and the Cutting Edge of Technology, 2010.","mla":"Röcker, Carsten, et al. “Towards Adaptive Interfaces for Supporting Elderly Users in Technology-Enhanced Home Environments.” Proceedings of the 18th Biennial Conference of the International Communications Society: Culture, Communication and the Cutting Edge of Technology, 2010.","bjps":"Röcker C et al. (2010) Towards Adaptive Interfaces for Supporting Elderly Users in Technology-Enhanced Home Environments. Proceedings of the 18th Biennial Conference of the International Communications Society: Culture, Communication and the Cutting Edge of Technology.","ufg":"Röcker, Carsten et. al. (2010): Towards Adaptive Interfaces for Supporting Elderly Users in Technology-Enhanced Home Environments, in: Proceedings of the 18th Biennial Conference of the International Communications Society: Culture, Communication and the Cutting Edge of Technology.","ieee":"C. Röcker et al., “Towards Adaptive Interfaces for Supporting Elderly Users in Technology-Enhanced Home Environments,” in Proceedings of the 18th Biennial Conference of the International Communications Society: Culture, Communication and the Cutting Edge of Technology, Tokyo, Japan, 2010.","apa":"Röcker, C., Wilkowska, W., Ziefle, M., Kasugai, K., Klack, L., Möllering, C., & Beul, S. (2010). Towards Adaptive Interfaces for Supporting Elderly Users in Technology-Enhanced Home Environments. In Proceedings of the 18th Biennial Conference of the International Communications Society: Culture, Communication and the Cutting Edge of Technology. Tokyo, Japan.","chicago":"Röcker, Carsten, Wiktoria Wilkowska, Martina Ziefle, Kai Kasugai, Lars Klack, Christian Möllering, and Shirley Beul. “Towards Adaptive Interfaces for Supporting Elderly Users in Technology-Enhanced Home Environments.” In Proceedings of the 18th Biennial Conference of the International Communications Society: Culture, Communication and the Cutting Edge of Technology, 2010.","short":"C. Röcker, W. Wilkowska, M. Ziefle, K. Kasugai, L. Klack, C. Möllering, S. Beul, in: Proceedings of the 18th Biennial Conference of the International Communications Society: Culture, Communication and the Cutting Edge of Technology, 2010.","chicago-de":"Röcker, Carsten, Wiktoria Wilkowska, Martina Ziefle, Kai Kasugai, Lars Klack, Christian Möllering und Shirley Beul. 2010. Towards Adaptive Interfaces for Supporting Elderly Users in Technology-Enhanced Home Environments. In: Proceedings of the 18th Biennial Conference of the International Communications Society: Culture, Communication and the Cutting Edge of Technology.","din1505-2-1":"Röcker, Carsten ; Wilkowska, Wiktoria ; Ziefle, Martina ; Kasugai, Kai ; Klack, Lars ; Möllering, Christian ; Beul, Shirley: Towards Adaptive Interfaces for Supporting Elderly Users in Technology-Enhanced Home Environments. In: Proceedings of the 18th Biennial Conference of the International Communications Society: Culture, Communication and the Cutting Edge of Technology, 2010"},"publication_status":"published","title":"Towards Adaptive Interfaces for Supporting Elderly Users in Technology-Enhanced Home Environments","extern":"1"},{"citation":{"short":"B. Kumar, M. Jäger, J. Jasperneite, in: 2010.","din1505-2-1":"Kumar, Barath ; Jäger, Michael ; Jasperneite, Jürgen: A Proposal for Graphical Extension of TTCN-3 Graphical Presentation Format (GFT). In: , 2010","chicago-de":"Kumar, Barath, Michael Jäger und Jürgen Jasperneite. 2010. A Proposal for Graphical Extension of TTCN-3 Graphical Presentation Format (GFT). In: .","apa":"Kumar, B., Jäger, M., & Jasperneite, J. (2010). A Proposal for Graphical Extension of TTCN-3 Graphical Presentation Format (GFT). Presented at the 8th IEEE International Workshop on Factory Communication Systems COMMUNICATION in AUTOMATION (WFCS 2010) , Nancy, France.","chicago":"Kumar, Barath, Michael Jäger, and Jürgen Jasperneite. “A Proposal for Graphical Extension of TTCN-3 Graphical Presentation Format (GFT),” 2010.","van":"Kumar B, Jäger M, Jasperneite J. A Proposal for Graphical Extension of TTCN-3 Graphical Presentation Format (GFT). In 2010.","ufg":"Kumar, Barath et. al. (2010): A Proposal for Graphical Extension of TTCN-3 Graphical Presentation Format (GFT), in: .","mla":"Kumar, Barath, et al. A Proposal for Graphical Extension of TTCN-3 Graphical Presentation Format (GFT). 2010.","havard":"B. Kumar, M. Jäger, J. Jasperneite, A Proposal for Graphical Extension of TTCN-3 Graphical Presentation Format (GFT), in: 2010.","bjps":"Kumar B, Jäger M and Jasperneite J (2010) A Proposal for Graphical Extension of TTCN-3 Graphical Presentation Format (GFT).","ieee":"B. Kumar, M. Jäger, and J. Jasperneite, “A Proposal for Graphical Extension of TTCN-3 Graphical Presentation Format (GFT),” presented at the 8th IEEE International Workshop on Factory Communication Systems COMMUNICATION in AUTOMATION (WFCS 2010) , Nancy, France, 2010.","ama":"Kumar B, Jäger M, Jasperneite J. A Proposal for Graphical Extension of TTCN-3 Graphical Presentation Format (GFT). In: ; 2010."},"title":"A Proposal for Graphical Extension of TTCN-3 Graphical Presentation Format (GFT)","status":"public","author":[{"first_name":"Barath","last_name":"Kumar","full_name":"Kumar, Barath"},{"last_name":"Jäger","first_name":"Michael","full_name":"Jäger, Michael"},{"id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"}],"year":2010,"conference":{"location":"Nancy, France","name":"8th IEEE International Workshop on Factory Communication Systems COMMUNICATION in AUTOMATION (WFCS 2010) "},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"user_id":"45673","date_updated":"2023-03-15T13:49:53Z","type":"conference","date_created":"2021-01-26T12:20:30Z","_id":"4515","language":[{"iso":"eng"}]},{"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"name":"8th IEEE International Workshop on Factory Communication Systems COMMUNICATION in AUTOMATION (WFCS 2010)","location":"Nancy, France"},"author":[{"first_name":"Lixue","last_name":"Han","full_name":"Han, Lixue"},{"id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"},{"full_name":"Werner, Thomas","first_name":"Thomas","id":"46437","last_name":"Werner"}],"year":2010,"status":"public","title":"DIVAN: A Network Calculator for the Off-line Performance Analysis of Virtual Automation Networks","citation":{"short":"L. Han, J. Jasperneite, T. Werner, in: 2010.","chicago-de":"Han, Lixue, Jürgen Jasperneite und Thomas Werner. 2010. DIVAN: A Network Calculator for the Off-line Performance Analysis of Virtual Automation Networks. In: .","din1505-2-1":"Han, Lixue ; Jasperneite, Jürgen ; Werner, Thomas: DIVAN: A Network Calculator for the Off-line Performance Analysis of Virtual Automation Networks. In: , 2010","apa":"Han, L., Jasperneite, J., & Werner, T. (2010). DIVAN: A Network Calculator for the Off-line Performance Analysis of Virtual Automation Networks. Presented at the 8th IEEE International Workshop on Factory Communication Systems COMMUNICATION in AUTOMATION (WFCS 2010), Nancy, France.","ieee":"L. Han, J. Jasperneite, and T. Werner, “DIVAN: A Network Calculator for the Off-line Performance Analysis of Virtual Automation Networks,” presented at the 8th IEEE International Workshop on Factory Communication Systems COMMUNICATION in AUTOMATION (WFCS 2010), Nancy, France, 2010.","chicago":"Han, Lixue, Jürgen Jasperneite, and Thomas Werner. “DIVAN: A Network Calculator for the Off-Line Performance Analysis of Virtual Automation Networks,” 2010.","van":"Han L, Jasperneite J, Werner T. DIVAN: A Network Calculator for the Off-line Performance Analysis of Virtual Automation Networks. In 2010.","ama":"Han L, Jasperneite J, Werner T. DIVAN: A Network Calculator for the Off-line Performance Analysis of Virtual Automation Networks. In: ; 2010.","ufg":"Han, Lixue et. al. (2010): DIVAN: A Network Calculator for the Off-line Performance Analysis of Virtual Automation Networks, in: .","havard":"L. Han, J. Jasperneite, T. Werner, DIVAN: A Network Calculator for the Off-line Performance Analysis of Virtual Automation Networks, in: 2010.","mla":"Han, Lixue, et al. DIVAN: A Network Calculator for the Off-Line Performance Analysis of Virtual Automation Networks. 2010.","bjps":"Han L, Jasperneite J and Werner T (2010) DIVAN: A Network Calculator for the Off-Line Performance Analysis of Virtual Automation Networks."},"language":[{"iso":"eng"}],"_id":"4516","date_created":"2021-01-26T12:22:28Z","type":"conference","date_updated":"2023-03-15T13:49:53Z","user_id":"79260"},{"user_id":"45673","date_updated":"2023-03-15T13:49:53Z","date_created":"2021-01-26T12:23:47Z","type":"conference","_id":"4517","language":[{"iso":"eng"}],"citation":{"short":"J. Jasperneite, in: 2010.","chicago-de":"Jasperneite, Jürgen. 2010. Durchgängiger flexibler Datenaustausch zwischen Feldebene und MES. In: .","din1505-2-1":"Jasperneite, Jürgen: Durchgängiger flexibler Datenaustausch zwischen Feldebene und MES. In: , 2010","van":"Jasperneite J. Durchgängiger flexibler Datenaustausch zwischen Feldebene und MES. In 2010.","ufg":"Jasperneite, Jürgen (2010): Durchgängiger flexibler Datenaustausch zwischen Feldebene und MES, in: .","mla":"Jasperneite, Jürgen. Durchgängiger Flexibler Datenaustausch Zwischen Feldebene Und MES. 2010.","havard":"J. Jasperneite, Durchgängiger flexibler Datenaustausch zwischen Feldebene und MES, in: 2010.","bjps":"Jasperneite J (2010) Durchgängiger Flexibler Datenaustausch Zwischen Feldebene Und MES.","apa":"Jasperneite, J. (2010). Durchgängiger flexibler Datenaustausch zwischen Feldebene und MES. Presented at the Karlsruher Leittechnisches Kolloquium 2010 (KLK2010) , Karlsruhe.","chicago":"Jasperneite, Jürgen. “Durchgängiger Flexibler Datenaustausch Zwischen Feldebene Und MES,” 2010.","ama":"Jasperneite J. Durchgängiger flexibler Datenaustausch zwischen Feldebene und MES. In: ; 2010.","ieee":"J. Jasperneite, “Durchgängiger flexibler Datenaustausch zwischen Feldebene und MES,” presented at the Karlsruher Leittechnisches Kolloquium 2010 (KLK2010) , Karlsruhe, 2010."},"title":"Durchgängiger flexibler Datenaustausch zwischen Feldebene und MES","status":"public","author":[{"last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"}],"year":2010,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"name":"Karlsruher Leittechnisches Kolloquium 2010 (KLK2010) ","location":"Karlsruhe"}},{"citation":{"ufg":"Jasperneite, Jürgen (2010): Anforderungen wandlungsfähiger Produktionstechnik an die Automation, in: .","havard":"J. Jasperneite, Anforderungen wandlungsfähiger Produktionstechnik an die Automation, in: 2010.","mla":"Jasperneite, Jürgen. Anforderungen Wandlungsfähiger Produktionstechnik an Die Automation. 2010.","bjps":"Jasperneite J (2010) Anforderungen Wandlungsfähiger Produktionstechnik an Die Automation.","van":"Jasperneite J. Anforderungen wandlungsfähiger Produktionstechnik an die Automation. In 2010.","ama":"Jasperneite J. Anforderungen wandlungsfähiger Produktionstechnik an die Automation. In: ; 2010.","chicago":"Jasperneite, Jürgen. “Anforderungen Wandlungsfähiger Produktionstechnik an Die Automation,” 2010.","apa":"Jasperneite, J. (2010). Anforderungen wandlungsfähiger Produktionstechnik an die Automation. Presented at the Fachforum Automation “Mehr Intelligenz in der Produktion”, Gemeinschaftsveranstaltung AiF/IHK, Lemgo.","ieee":"J. Jasperneite, “Anforderungen wandlungsfähiger Produktionstechnik an die Automation,” presented at the Fachforum Automation “Mehr Intelligenz in der Produktion”, Gemeinschaftsveranstaltung AiF/IHK, Lemgo, 2010.","chicago-de":"Jasperneite, Jürgen. 2010. Anforderungen wandlungsfähiger Produktionstechnik an die Automation. In: .","din1505-2-1":"Jasperneite, Jürgen: Anforderungen wandlungsfähiger Produktionstechnik an die Automation. In: , 2010","short":"J. Jasperneite, in: 2010."},"title":"Anforderungen wandlungsfähiger Produktionstechnik an die Automation","status":"public","author":[{"first_name":"Jürgen","last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen"}],"year":2010,"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"location":"Lemgo","name":"Fachforum Automation \"Mehr Intelligenz in der Produktion\", Gemeinschaftsveranstaltung AiF/IHK"},"user_id":"45673","date_updated":"2023-03-15T13:49:53Z","type":"conference","date_created":"2021-01-26T12:25:02Z","_id":"4519","language":[{"iso":"eng"}]},{"user_id":"45673","date_updated":"2023-03-15T13:49:53Z","intvolume":" 9","publication":"ZWF (Zeitschrift für wirtschaftlichen Fabrikbetrieb)","date_created":"2021-01-26T12:28:43Z","type":"journal_article","language":[{"iso":"eng"}],"_id":"4520","citation":{"short":"O. Sauer, J. Jasperneite, ZWF (Zeitschrift Für Wirtschaftlichen Fabrikbetrieb) 9 (2010).","din1505-2-1":"Sauer, Olaf ; Jasperneite, Jürgen: Wandlungsfähige Informationstechnik in der Fabrik. In: ZWF (Zeitschrift für wirtschaftlichen Fabrikbetrieb) Bd. 9 (2010)","chicago-de":"Sauer, Olaf und Jürgen Jasperneite. 2010. Wandlungsfähige Informationstechnik in der Fabrik. ZWF (Zeitschrift für wirtschaftlichen Fabrikbetrieb) 9.","van":"Sauer O, Jasperneite J. Wandlungsfähige Informationstechnik in der Fabrik. ZWF (Zeitschrift für wirtschaftlichen Fabrikbetrieb). 2010;9.","havard":"O. Sauer, J. Jasperneite, Wandlungsfähige Informationstechnik in der Fabrik, ZWF (Zeitschrift Für Wirtschaftlichen Fabrikbetrieb). 9 (2010).","mla":"Sauer, Olaf, and Jürgen Jasperneite. “Wandlungsfähige Informationstechnik in Der Fabrik.” ZWF (Zeitschrift Für Wirtschaftlichen Fabrikbetrieb), vol. 9, 2010.","bjps":"Sauer O and Jasperneite J (2010) Wandlungsfähige Informationstechnik in Der Fabrik. ZWF (Zeitschrift für wirtschaftlichen Fabrikbetrieb) 9.","ufg":"Sauer, Olaf/Jasperneite, Jürgen (2010): Wandlungsfähige Informationstechnik in der Fabrik, in: ZWF (Zeitschrift für wirtschaftlichen Fabrikbetrieb) 9.","apa":"Sauer, O., & Jasperneite, J. (2010). Wandlungsfähige Informationstechnik in der Fabrik. ZWF (Zeitschrift Für Wirtschaftlichen Fabrikbetrieb), 9.","chicago":"Sauer, Olaf, and Jürgen Jasperneite. “Wandlungsfähige Informationstechnik in Der Fabrik.” ZWF (Zeitschrift Für Wirtschaftlichen Fabrikbetrieb) 9 (2010).","ama":"Sauer O, Jasperneite J. Wandlungsfähige Informationstechnik in der Fabrik. ZWF (Zeitschrift für wirtschaftlichen Fabrikbetrieb). 2010;9.","ieee":"O. Sauer and J. Jasperneite, “Wandlungsfähige Informationstechnik in der Fabrik,” ZWF (Zeitschrift für wirtschaftlichen Fabrikbetrieb), vol. 9, 2010."},"volume":9,"title":"Wandlungsfähige Informationstechnik in der Fabrik","status":"public","year":2010,"author":[{"full_name":"Sauer, Olaf","first_name":"Olaf","last_name":"Sauer"},{"id":"1899","first_name":"Jürgen","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite"}],"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}]},{"user_id":"45673","date_updated":"2023-03-15T13:49:53Z","type":"conference","date_created":"2021-01-26T12:30:32Z","language":[{"iso":"eng"}],"_id":"4521","citation":{"short":"J. Imtiaz, J. Jasperneite, K. Weber, in: 2010.","chicago-de":"Imtiaz, Jahanzaib, Jürgen Jasperneite und Karl Weber. 2010. Redundant Structures for a Generic Real-time Ethernet System. In: .","din1505-2-1":"Imtiaz, Jahanzaib ; Jasperneite, Jürgen ; Weber, Karl: Redundant Structures for a Generic Real-time Ethernet System. In: , 2010","van":"Imtiaz J, Jasperneite J, Weber K. Redundant Structures for a Generic Real-time Ethernet System. In 2010.","bjps":"Imtiaz J, Jasperneite J and Weber K (2010) Redundant Structures for a Generic Real-Time Ethernet System.","mla":"Imtiaz, Jahanzaib, et al. Redundant Structures for a Generic Real-Time Ethernet System. 2010.","havard":"J. Imtiaz, J. Jasperneite, K. Weber, Redundant Structures for a Generic Real-time Ethernet System, in: 2010.","ufg":"Imtiaz, Jahanzaib et. al. (2010): Redundant Structures for a Generic Real-time Ethernet System, in: .","apa":"Imtiaz, J., Jasperneite, J., & Weber, K. (2010). Redundant Structures for a Generic Real-time Ethernet System. Presented at the 15th IEEE International Conference on Emerging Technologies and Factory Automation, Bilbao, Spain .","chicago":"Imtiaz, Jahanzaib, Jürgen Jasperneite, and Karl Weber. “Redundant Structures for a Generic Real-Time Ethernet System,” 2010.","ama":"Imtiaz J, Jasperneite J, Weber K. Redundant Structures for a Generic Real-time Ethernet System. In: ; 2010.","ieee":"J. Imtiaz, J. Jasperneite, and K. Weber, “Redundant Structures for a Generic Real-time Ethernet System,” presented at the 15th IEEE International Conference on Emerging Technologies and Factory Automation, Bilbao, Spain , 2010."},"title":"Redundant Structures for a Generic Real-time Ethernet System","status":"public","year":2010,"author":[{"first_name":"Jahanzaib","last_name":"Imtiaz","full_name":"Imtiaz, Jahanzaib"},{"id":"1899","first_name":"Jürgen","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite"},{"first_name":"Karl","last_name":"Weber","full_name":"Weber, Karl"}],"conference":{"location":"Bilbao, Spain ","name":"15th IEEE International Conference on Emerging Technologies and Factory Automation"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}]},{"year":2010,"author":[{"id":"1710","first_name":"Lukasz","last_name":"Wisniewski","full_name":"Wisniewski, Lukasz"},{"full_name":"Borzemski, Leszek","last_name":"Borzemski","first_name":"Leszek"},{"last_name":"Jasperneite","first_name":"Jürgen","id":"1899","full_name":"Jasperneite, Jürgen"}],"conference":{"location":"Szklarska Poreba, Poland ","name":"International Conference Information Systems, Architecture, and Technology (ISAT 2010) "},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"status":"public","title":"A New Scheduling Wireless Communication Mechanism in Cellular Systems Based on Genetic Approach","citation":{"apa":"Wisniewski, L., Borzemski, L., & Jasperneite, J. (2010). A New Scheduling Wireless Communication Mechanism in Cellular Systems Based on Genetic Approach. Presented at the International Conference Information Systems, Architecture, and Technology (ISAT 2010) , Szklarska Poreba, Poland .","ieee":"L. Wisniewski, L. Borzemski, and J. Jasperneite, “A New Scheduling Wireless Communication Mechanism in Cellular Systems Based on Genetic Approach,” presented at the International Conference Information Systems, Architecture, and Technology (ISAT 2010) , Szklarska Poreba, Poland , 2010.","chicago":"Wisniewski, Lukasz, Leszek Borzemski, and Jürgen Jasperneite. “A New Scheduling Wireless Communication Mechanism in Cellular Systems Based on Genetic Approach,” 2010.","van":"Wisniewski L, Borzemski L, Jasperneite J. A New Scheduling Wireless Communication Mechanism in Cellular Systems Based on Genetic Approach. In 2010.","ama":"Wisniewski L, Borzemski L, Jasperneite J. A New Scheduling Wireless Communication Mechanism in Cellular Systems Based on Genetic Approach. In: ; 2010.","ufg":"Wisniewski, Lukasz et. al. (2010): A New Scheduling Wireless Communication Mechanism in Cellular Systems Based on Genetic Approach, in: .","havard":"L. Wisniewski, L. Borzemski, J. Jasperneite, A New Scheduling Wireless Communication Mechanism in Cellular Systems Based on Genetic Approach, in: 2010.","mla":"Wisniewski, Lukasz, et al. A New Scheduling Wireless Communication Mechanism in Cellular Systems Based on Genetic Approach. 2010.","bjps":"Wisniewski L, Borzemski L and Jasperneite J (2010) A New Scheduling Wireless Communication Mechanism in Cellular Systems Based on Genetic Approach.","short":"L. Wisniewski, L. Borzemski, J. Jasperneite, in: 2010.","din1505-2-1":"Wisniewski, Lukasz ; Borzemski, Leszek ; Jasperneite, Jürgen: A New Scheduling Wireless Communication Mechanism in Cellular Systems Based on Genetic Approach. In: , 2010","chicago-de":"Wisniewski, Lukasz, Leszek Borzemski und Jürgen Jasperneite. 2010. A New Scheduling Wireless Communication Mechanism in Cellular Systems Based on Genetic Approach. In: ."},"_id":"4522","language":[{"iso":"eng"}],"type":"conference","date_created":"2021-01-26T12:32:22Z","user_id":"45673","date_updated":"2023-03-15T13:49:53Z"},{"_id":"4523","language":[{"iso":"eng"}],"date_created":"2021-01-26T12:34:09Z","type":"conference","date_updated":"2023-03-15T13:49:53Z","user_id":"45673","conference":{"location":"Bochum","name":"Wireless Technologies"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"author":[{"last_name":"Schäfermann","full_name":"Schäfermann, Mark","first_name":"Mark"},{"last_name":"Trsek","full_name":"Trsek, Henning","id":"1486","first_name":"Henning"},{"last_name":"Jasperneite","first_name":"Jürgen","full_name":"Jasperneite, Jürgen","id":"1899"}],"year":2010,"status":"public","title":"Untersuchung von Mobilfunknetzen für zuverlässige M2M-Anwendungen","citation":{"short":"M. Schäfermann, H. Trsek, J. Jasperneite, in: 2010.","chicago-de":"Schäfermann, Mark, Henning Trsek und Jürgen Jasperneite. 2010. Untersuchung von Mobilfunknetzen für zuverlässige M2M-Anwendungen. In: .","din1505-2-1":"Schäfermann, Mark ; Trsek, Henning ; Jasperneite, Jürgen: Untersuchung von Mobilfunknetzen für zuverlässige M2M-Anwendungen. In: , 2010","apa":"Schäfermann, M., Trsek, H., & Jasperneite, J. (2010). Untersuchung von Mobilfunknetzen für zuverlässige M2M-Anwendungen. Presented at the Wireless Technologies, Bochum.","chicago":"Schäfermann, Mark, Henning Trsek, and Jürgen Jasperneite. “Untersuchung von Mobilfunknetzen Für Zuverlässige M2M-Anwendungen,” 2010.","van":"Schäfermann M, Trsek H, Jasperneite J. Untersuchung von Mobilfunknetzen für zuverlässige M2M-Anwendungen. In 2010.","havard":"M. Schäfermann, H. Trsek, J. Jasperneite, Untersuchung von Mobilfunknetzen für zuverlässige M2M-Anwendungen, in: 2010.","bjps":"Schäfermann M, Trsek H and Jasperneite J (2010) Untersuchung von Mobilfunknetzen Für Zuverlässige M2M-Anwendungen.","mla":"Schäfermann, Mark, et al. Untersuchung von Mobilfunknetzen Für Zuverlässige M2M-Anwendungen. 2010.","ufg":"Schäfermann, Mark et. al. (2010): Untersuchung von Mobilfunknetzen für zuverlässige M2M-Anwendungen, in: .","ieee":"M. Schäfermann, H. Trsek, and J. Jasperneite, “Untersuchung von Mobilfunknetzen für zuverlässige M2M-Anwendungen,” presented at the Wireless Technologies, Bochum, 2010.","ama":"Schäfermann M, Trsek H, Jasperneite J. Untersuchung von Mobilfunknetzen für zuverlässige M2M-Anwendungen. In: ; 2010."}},{"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"year":2010,"language":[{"iso":"eng"}],"status":"public","place":"Lemgo","_id":"4524","date_created":"2021-01-26T12:35:53Z","type":"conference_editor","title":"Fachkolloquium Kommunikation in der Automation (KommA 2010)","date_updated":"2023-03-15T13:49:53Z","user_id":"45673","editor":[{"last_name":"Jasperneite","id":"1899","first_name":"Jürgen","full_name":"Jasperneite, Jürgen"},{"full_name":"Jumar, Ulrich","first_name":"Ulrich","last_name":"Jumar"}],"citation":{"short":"J. Jasperneite, U. Jumar, eds., Fachkolloquium Kommunikation in Der Automation (KommA 2010), Lemgo, 2010.","chicago-de":"Jasperneite, Jürgen und Ulrich Jumar, Hrsg. 2010. Fachkolloquium Kommunikation in der Automation (KommA 2010). Lemgo.","din1505-2-1":"Jasperneite, J. ; Jumar, U. (Hrsg.): Fachkolloquium Kommunikation in der Automation (KommA 2010). Lemgo, 2010","ama":"Jasperneite J, Jumar U, eds. Fachkolloquium Kommunikation in Der Automation (KommA 2010). Lemgo; 2010.","van":"Jasperneite J, Jumar U, editors. Fachkolloquium Kommunikation in der Automation (KommA 2010). Lemgo; 2010.","bjps":"Jasperneite J and Jumar U (eds) (2010) Fachkolloquium Kommunikation in Der Automation (KommA 2010). Lemgo.","mla":"Jasperneite, Jürgen, and Ulrich Jumar, editors. Fachkolloquium Kommunikation in Der Automation (KommA 2010). 2010.","havard":"J. Jasperneite, U. Jumar, eds., Fachkolloquium Kommunikation in der Automation (KommA 2010), Lemgo, 2010.","ufg":"Jasperneite, Jürgen/Jumar, Ulrich (Hgg.) (2010): Fachkolloquium Kommunikation in der Automation (KommA 2010), Lemgo.","ieee":"J. Jasperneite and U. Jumar, Eds., Fachkolloquium Kommunikation in der Automation (KommA 2010). Lemgo, 2010.","apa":"Jasperneite, J., & Jumar, U. (Eds.). (2010). Fachkolloquium Kommunikation in der Automation (KommA 2010). Lemgo.","chicago":"Jasperneite, Jürgen, and Ulrich Jumar, eds. Fachkolloquium Kommunikation in Der Automation (KommA 2010). Lemgo, 2010."}},{"user_id":"45673","date_updated":"2023-03-15T13:49:53Z","date_created":"2021-01-26T12:47:00Z","type":"conference","language":[{"iso":"eng"}],"_id":"4525","citation":{"din1505-2-1":"Schäfermann, Mark ; Jasperneite, Jürgen: Evaluierung von 2G und 3G Mobilfunknetzen für M2M-Anwendungen. In: , 2010","chicago-de":"Schäfermann, Mark und Jürgen Jasperneite. 2010. Evaluierung von 2G und 3G Mobilfunknetzen für M2M-Anwendungen. In: .","short":"M. Schäfermann, J. Jasperneite, in: 2010.","chicago":"Schäfermann, Mark, and Jürgen Jasperneite. “Evaluierung von 2G Und 3G Mobilfunknetzen Für M2M-Anwendungen,” 2010.","ieee":"M. Schäfermann and J. Jasperneite, “Evaluierung von 2G und 3G Mobilfunknetzen für M2M-Anwendungen,” presented at the Fachkolloquium KommA, Lemgo, 2010.","apa":"Schäfermann, M., & Jasperneite, J. (2010). Evaluierung von 2G und 3G Mobilfunknetzen für M2M-Anwendungen. Presented at the Fachkolloquium KommA, Lemgo.","bjps":"Schäfermann M and Jasperneite J (2010) Evaluierung von 2G Und 3G Mobilfunknetzen Für M2M-Anwendungen.","havard":"M. Schäfermann, J. Jasperneite, Evaluierung von 2G und 3G Mobilfunknetzen für M2M-Anwendungen, in: 2010.","mla":"Schäfermann, Mark, and Jürgen Jasperneite. Evaluierung von 2G Und 3G Mobilfunknetzen Für M2M-Anwendungen. 2010.","ufg":"Schäfermann, Mark/Jasperneite, Jürgen (2010): Evaluierung von 2G und 3G Mobilfunknetzen für M2M-Anwendungen, in: .","ama":"Schäfermann M, Jasperneite J. Evaluierung von 2G und 3G Mobilfunknetzen für M2M-Anwendungen. In: ; 2010.","van":"Schäfermann M, Jasperneite J. Evaluierung von 2G und 3G Mobilfunknetzen für M2M-Anwendungen. In 2010."},"title":"Evaluierung von 2G und 3G Mobilfunknetzen für M2M-Anwendungen","status":"public","year":2010,"author":[{"full_name":"Schäfermann, Mark","first_name":"Mark","last_name":"Schäfermann"},{"last_name":"Jasperneite","first_name":"Jürgen","id":"1899","full_name":"Jasperneite, Jürgen"}],"department":[{"_id":"DEP5019"},{"_id":"DEP5023"}],"conference":{"location":"Lemgo","name":"Fachkolloquium KommA"}},{"_id":"8313","language":[{"iso":"eng"}],"place":"Lemgo","date_updated":"2023-03-15T13:50:14Z","user_id":"10982","supervisor":[{"first_name":"Stefan","last_name":"Heiss","full_name":"Heiss, Stefan","id":"1031"}],"date_created":"2022-05-30T15:45:32Z","type":"bachelor_thesis","publisher":"Technische Hochschule OWL","status":"public","department":[{"_id":"DEP5000"},{"_id":"DEP5023"},{"_id":"DEP5025"}],"year":2010,"author":[{"full_name":"Rabe, Heinrich","last_name":"Rabe","first_name":"Heinrich"}],"citation":{"ufg":"Rabe, Heinrich (2010): Einsatz von XML-Technologien zur Steuerung und Definition von Testfällen in einer Benchmarkumgebung für Javacards, Lemgo.","mla":"Rabe, Heinrich. Einsatz von XML-Technologien Zur Steuerung Und Definition von Testfällen in Einer Benchmarkumgebung Für Javacards. Technische Hochschule OWL, 2010.","havard":"H. Rabe, Einsatz von XML-Technologien zur Steuerung und Definition von Testfällen in einer Benchmarkumgebung für Javacards, Technische Hochschule OWL, Lemgo, 2010.","bjps":"Rabe H (2010) Einsatz von XML-Technologien Zur Steuerung Und Definition von Testfällen in Einer Benchmarkumgebung Für Javacards. Lemgo: Technische Hochschule OWL.","van":"Rabe H. Einsatz von XML-Technologien zur Steuerung und Definition von Testfällen in einer Benchmarkumgebung für Javacards. Lemgo: Technische Hochschule OWL; 2010.","chicago":"Rabe, Heinrich. Einsatz von XML-Technologien Zur Steuerung Und Definition von Testfällen in Einer Benchmarkumgebung Für Javacards. Lemgo: Technische Hochschule OWL, 2010.","apa":"Rabe, H. (2010). Einsatz von XML-Technologien zur Steuerung und Definition von Testfällen in einer Benchmarkumgebung für Javacards. Lemgo: Technische Hochschule OWL.","chicago-de":"Rabe, Heinrich. 2010. Einsatz von XML-Technologien zur Steuerung und Definition von Testfällen in einer Benchmarkumgebung für Javacards. Lemgo: Technische Hochschule OWL.","din1505-2-1":"Rabe, Heinrich: Einsatz von XML-Technologien zur Steuerung und Definition von Testfällen in einer Benchmarkumgebung für Javacards. Lemgo : Technische Hochschule OWL, 2010","short":"H. Rabe, Einsatz von XML-Technologien Zur Steuerung Und Definition von Testfällen in Einer Benchmarkumgebung Für Javacards, Technische Hochschule OWL, Lemgo, 2010.","ama":"Rabe H. Einsatz von XML-Technologien Zur Steuerung Und Definition von Testfällen in Einer Benchmarkumgebung Für Javacards. Lemgo: Technische Hochschule OWL; 2010.","ieee":"H. Rabe, Einsatz von XML-Technologien zur Steuerung und Definition von Testfällen in einer Benchmarkumgebung für Javacards. Lemgo: Technische Hochschule OWL, 2010."},"title":"Einsatz von XML-Technologien zur Steuerung und Definition von Testfällen in einer Benchmarkumgebung für Javacards"},{"_id":"8314","language":[{"iso":"eng"}],"place":"Lemgo","date_updated":"2023-03-15T13:50:14Z","user_id":"10982","supervisor":[{"last_name":"Heiss","full_name":"Heiss, Stefan","id":"1031","first_name":"Stefan"}],"type":"bachelor_thesis","date_created":"2022-05-30T15:46:14Z","publisher":"Technische Hochschule OWL","status":"public","department":[{"_id":"DEP5000"},{"_id":"DEP5023"},{"_id":"DEP5025"}],"year":2010,"author":[{"last_name":"Badinger","first_name":"Johann","full_name":"Badinger, Johann"}],"citation":{"ama":"Badinger J. Entwicklung Eines IPsec-Konfigurationstools. Lemgo: Technische Hochschule OWL; 2010.","ieee":"J. Badinger, Entwicklung eines IPsec-Konfigurationstools. Lemgo: Technische Hochschule OWL, 2010.","short":"J. Badinger, Entwicklung Eines IPsec-Konfigurationstools, Technische Hochschule OWL, Lemgo, 2010.","chicago-de":"Badinger, Johann. 2010. Entwicklung eines IPsec-Konfigurationstools. Lemgo: Technische Hochschule OWL.","din1505-2-1":"Badinger, Johann: Entwicklung eines IPsec-Konfigurationstools. Lemgo : Technische Hochschule OWL, 2010","van":"Badinger J. Entwicklung eines IPsec-Konfigurationstools. Lemgo: Technische Hochschule OWL; 2010.","bjps":"Badinger J (2010) Entwicklung Eines IPsec-Konfigurationstools. Lemgo: Technische Hochschule OWL.","havard":"J. Badinger, Entwicklung eines IPsec-Konfigurationstools, Technische Hochschule OWL, Lemgo, 2010.","mla":"Badinger, Johann. Entwicklung Eines IPsec-Konfigurationstools. Technische Hochschule OWL, 2010.","ufg":"Badinger, Johann (2010): Entwicklung eines IPsec-Konfigurationstools, Lemgo.","apa":"Badinger, J. (2010). Entwicklung eines IPsec-Konfigurationstools. Lemgo: Technische Hochschule OWL.","chicago":"Badinger, Johann. Entwicklung Eines IPsec-Konfigurationstools. Lemgo: Technische Hochschule OWL, 2010."},"title":"Entwicklung eines IPsec-Konfigurationstools"},{"date_updated":"2023-03-15T13:50:14Z","user_id":"10982","date_created":"2022-05-30T15:47:02Z","type":"bachelor_thesis","supervisor":[{"full_name":"Heiss, Stefan","last_name":"Heiss","id":"1031","first_name":"Stefan"}],"language":[{"iso":"eng"}],"place":"Lemgo","_id":"8315","citation":{"chicago":"Morlang, Viktor. Entwicklung Eines Gerätetreibers in Der Programmiersprache C Für Einen Nios II IP-Core Zur Kommunikation Mit SmartCards Nach ISO/IEC 7816-3. Lemgo: Technische Hochschule Ostwestfalen-Lippe, 2010.","apa":"Morlang, V. (2010). Entwicklung eines Gerätetreibers in der Programmiersprache C für einen Nios II IP-Core zur Kommunikation mit SmartCards nach ISO/IEC 7816-3. Lemgo: Technische Hochschule Ostwestfalen-Lippe.","mla":"Morlang, Viktor. Entwicklung Eines Gerätetreibers in Der Programmiersprache C Für Einen Nios II IP-Core Zur Kommunikation Mit SmartCards Nach ISO/IEC 7816-3. Technische Hochschule Ostwestfalen-Lippe, 2010.","havard":"V. Morlang, Entwicklung eines Gerätetreibers in der Programmiersprache C für einen Nios II IP-Core zur Kommunikation mit SmartCards nach ISO/IEC 7816-3, Technische Hochschule Ostwestfalen-Lippe, Lemgo, 2010.","bjps":"Morlang V (2010) Entwicklung Eines Gerätetreibers in Der Programmiersprache C Für Einen Nios II IP-Core Zur Kommunikation Mit SmartCards Nach ISO/IEC 7816-3. Lemgo: Technische Hochschule Ostwestfalen-Lippe.","ufg":"Morlang, Viktor (2010): Entwicklung eines Gerätetreibers in der Programmiersprache C für einen Nios II IP-Core zur Kommunikation mit SmartCards nach ISO/IEC 7816-3, Lemgo.","van":"Morlang V. Entwicklung eines Gerätetreibers in der Programmiersprache C für einen Nios II IP-Core zur Kommunikation mit SmartCards nach ISO/IEC 7816-3. Lemgo: Technische Hochschule Ostwestfalen-Lippe; 2010.","din1505-2-1":"Morlang, Viktor: Entwicklung eines Gerätetreibers in der Programmiersprache C für einen Nios II IP-Core zur Kommunikation mit SmartCards nach ISO/IEC 7816-3. Lemgo : Technische Hochschule Ostwestfalen-Lippe, 2010","chicago-de":"Morlang, Viktor. 2010. Entwicklung eines Gerätetreibers in der Programmiersprache C für einen Nios II IP-Core zur Kommunikation mit SmartCards nach ISO/IEC 7816-3. Lemgo: Technische Hochschule Ostwestfalen-Lippe.","short":"V. Morlang, Entwicklung Eines Gerätetreibers in Der Programmiersprache C Für Einen Nios II IP-Core Zur Kommunikation Mit SmartCards Nach ISO/IEC 7816-3, Technische Hochschule Ostwestfalen-Lippe, Lemgo, 2010.","ieee":"V. Morlang, Entwicklung eines Gerätetreibers in der Programmiersprache C für einen Nios II IP-Core zur Kommunikation mit SmartCards nach ISO/IEC 7816-3. Lemgo: Technische Hochschule Ostwestfalen-Lippe, 2010.","ama":"Morlang V. Entwicklung Eines Gerätetreibers in Der Programmiersprache C Für Einen Nios II IP-Core Zur Kommunikation Mit SmartCards Nach ISO/IEC 7816-3. Lemgo: Technische Hochschule Ostwestfalen-Lippe; 2010."},"title":"Entwicklung eines Gerätetreibers in der Programmiersprache C für einen Nios II IP-Core zur Kommunikation mit SmartCards nach ISO/IEC 7816-3","status":"public","publisher":"Technische Hochschule Ostwestfalen-Lippe","department":[{"_id":"DEP5000"},{"_id":"DEP5023"},{"_id":"DEP5025"}],"author":[{"first_name":"Viktor","last_name":"Morlang","full_name":"Morlang, Viktor"}],"year":2010},{"publisher":"Technische Hochschule Ostwestfalen-Lippe","status":"public","author":[{"last_name":"Walter","full_name":"Walter, Thomas","first_name":"Thomas"}],"year":2010,"department":[{"_id":"DEP5000"},{"_id":"DEP5023"},{"_id":"DEP5025"}],"citation":{"ama":"Walter T. Entwicklung Der Basis-Firmware Eines Analysators Für Den Lokalbus Einer Sicherheitsgerichteten SPS. Lemgo: Technische Hochschule Ostwestfalen-Lippe; 2010.","ieee":"T. Walter, Entwicklung der Basis-Firmware eines Analysators für den Lokalbus einer sicherheitsgerichteten SPS. Lemgo: Technische Hochschule Ostwestfalen-Lippe, 2010.","short":"T. Walter, Entwicklung Der Basis-Firmware Eines Analysators Für Den Lokalbus Einer Sicherheitsgerichteten SPS, Technische Hochschule Ostwestfalen-Lippe, Lemgo, 2010.","chicago-de":"Walter, Thomas. 2010. Entwicklung der Basis-Firmware eines Analysators für den Lokalbus einer sicherheitsgerichteten SPS. Lemgo: Technische Hochschule Ostwestfalen-Lippe.","din1505-2-1":"Walter, Thomas: Entwicklung der Basis-Firmware eines Analysators für den Lokalbus einer sicherheitsgerichteten SPS. Lemgo : Technische Hochschule Ostwestfalen-Lippe, 2010","van":"Walter T. Entwicklung der Basis-Firmware eines Analysators für den Lokalbus einer sicherheitsgerichteten SPS. Lemgo: Technische Hochschule Ostwestfalen-Lippe; 2010.","mla":"Walter, Thomas. Entwicklung Der Basis-Firmware Eines Analysators Für Den Lokalbus Einer Sicherheitsgerichteten SPS. Technische Hochschule Ostwestfalen-Lippe, 2010.","havard":"T. Walter, Entwicklung der Basis-Firmware eines Analysators für den Lokalbus einer sicherheitsgerichteten SPS, Technische Hochschule Ostwestfalen-Lippe, Lemgo, 2010.","bjps":"Walter T (2010) Entwicklung Der Basis-Firmware Eines Analysators Für Den Lokalbus Einer Sicherheitsgerichteten SPS. Lemgo: Technische Hochschule Ostwestfalen-Lippe.","ufg":"Walter, Thomas (2010): Entwicklung der Basis-Firmware eines Analysators für den Lokalbus einer sicherheitsgerichteten SPS, Lemgo.","apa":"Walter, T. (2010). Entwicklung der Basis-Firmware eines Analysators für den Lokalbus einer sicherheitsgerichteten SPS. Lemgo: Technische Hochschule Ostwestfalen-Lippe.","chicago":"Walter, Thomas. Entwicklung Der Basis-Firmware Eines Analysators Für Den Lokalbus Einer Sicherheitsgerichteten SPS. Lemgo: Technische Hochschule Ostwestfalen-Lippe, 2010."},"title":"Entwicklung der Basis-Firmware eines Analysators für den Lokalbus einer sicherheitsgerichteten SPS","_id":"8317","place":"Lemgo","language":[{"iso":"eng"}],"user_id":"10982","date_updated":"2023-03-15T13:50:14Z","type":"bachelor_thesis","date_created":"2022-05-30T15:48:11Z"},{"_id":"5612","language":[{"iso":"eng"}],"publication":"Jahreskolloquium \"Kommunikation in der Automation (KommA)","date_created":"2021-04-19T09:52:08Z","type":"conference","user_id":"10982","date_updated":"2023-03-15T13:50:00Z","year":2010,"author":[{"last_name":"Adamczyk","first_name":"Heiko","full_name":"Adamczyk, Heiko"},{"last_name":"Tino","full_name":"Tino, Döhring","first_name":"Döhring"},{"first_name":"Stefan","full_name":"Heiss, Stefan","last_name":"Heiss"}],"department":[{"_id":"DEP5000"},{"_id":"DEP5023"}],"status":"public","title":"Verfahren zur Identifikation und Analyse von IT Security Schwachstellen für Automatisierungsgeräte","citation":{"ama":"Adamczyk H, Tino D, Heiss S. Verfahren zur Identifikation und Analyse von IT Security Schwachstellen für Automatisierungsgeräte. In: Jahreskolloquium \"Kommunikation in Der Automation (KommA). ; 2010.","ieee":"H. Adamczyk, D. Tino, and S. Heiss, “Verfahren zur Identifikation und Analyse von IT Security Schwachstellen für Automatisierungsgeräte,” in Jahreskolloquium \"Kommunikation in der Automation (KommA), 2010.","bjps":"Adamczyk H, Tino D and Heiss S (2010) Verfahren Zur Identifikation Und Analyse von IT Security Schwachstellen Für Automatisierungsgeräte. Jahreskolloquium \"Kommunikation in Der Automation (KommA).","mla":"Adamczyk, Heiko, et al. “Verfahren Zur Identifikation Und Analyse von IT Security Schwachstellen Für Automatisierungsgeräte.” Jahreskolloquium \"Kommunikation in Der Automation (KommA), 2010.","havard":"H. Adamczyk, D. Tino, S. Heiss, Verfahren zur Identifikation und Analyse von IT Security Schwachstellen für Automatisierungsgeräte, in: Jahreskolloquium \"Kommunikation in Der Automation (KommA), 2010.","ufg":"Adamczyk, Heiko et. al. (2010): Verfahren zur Identifikation und Analyse von IT Security Schwachstellen für Automatisierungsgeräte, in: Jahreskolloquium \"Kommunikation in der Automation (KommA).","van":"Adamczyk H, Tino D, Heiss S. Verfahren zur Identifikation und Analyse von IT Security Schwachstellen für Automatisierungsgeräte. In: Jahreskolloquium \"Kommunikation in der Automation (KommA). 2010.","chicago":"Adamczyk, Heiko, Döhring Tino, and Stefan Heiss. “Verfahren Zur Identifikation Und Analyse von IT Security Schwachstellen Für Automatisierungsgeräte.” In Jahreskolloquium \"Kommunikation in Der Automation (KommA), 2010.","apa":"Adamczyk, H., Tino, D., & Heiss, S. (2010). Verfahren zur Identifikation und Analyse von IT Security Schwachstellen für Automatisierungsgeräte. In Jahreskolloquium \"Kommunikation in der Automation (KommA).","chicago-de":"Adamczyk, Heiko, Döhring Tino und Stefan Heiss. 2010. Verfahren zur Identifikation und Analyse von IT Security Schwachstellen für Automatisierungsgeräte. In: Jahreskolloquium \"Kommunikation in der Automation (KommA).","din1505-2-1":"Adamczyk, Heiko ; Tino, Döhring ; Heiss, Stefan: Verfahren zur Identifikation und Analyse von IT Security Schwachstellen für Automatisierungsgeräte. In: Jahreskolloquium \"Kommunikation in der Automation (KommA), 2010","short":"H. Adamczyk, D. Tino, S. Heiss, in: Jahreskolloquium \"Kommunikation in Der Automation (KommA), 2010."}},{"editor":[{"id":"61520","first_name":"Axel","last_name":"Häusler","full_name":"Häusler, Axel"}],"date_updated":"2023-09-21T13:35:08Z","user_id":"83781","date_created":"2021-04-30T15:40:08Z","type":"book_editor","publication_identifier":{"isbn":["978-3-86859-045-6"]},"_id":"5756","language":[{"iso":"ger"}],"place":"Berlin","keyword":["Wuppertal-Arrenberg","Sozioökonomischer Wandel","Stadtentwicklung"],"alternative_title":["Blickpunkte städtischer Nachbarschaft"],"publication_status":"published","citation":{"short":"A. Häusler, ed., Das war nicht Monaco hier, Jovis, Berlin, 2010.","din1505-2-1":"Häusler, A. (Hrsg.): Das war nicht Monaco hier. Berlin : Jovis, 2010","chicago-de":"Häusler, Axel, Hrsg. 2010. Das war nicht Monaco hier. Berlin: Jovis.","apa":"Häusler, A. (Ed.). (2010). Das war nicht Monaco hier. Jovis.","ieee":"A. Häusler, Ed., Das war nicht Monaco hier. Berlin: Jovis, 2010.","chicago":"Häusler, Axel, ed. Das war nicht Monaco hier. Berlin: Jovis, 2010.","van":"Häusler A, editor. Das war nicht Monaco hier. Berlin: Jovis; 2010. 112 p.","ama":"Häusler A, ed. Das war nicht Monaco hier. Jovis; 2010.","ufg":"Häusler, Axel: Das war nicht Monaco hier, Berlin 2010.","havard":"A. Häusler, ed., Das war nicht Monaco hier, Jovis, Berlin, 2010.","mla":"Häusler, Axel, editor. Das war nicht Monaco hier. Jovis, 2010.","bjps":"Häusler A (ed.) (2010) Das war nicht Monaco hier. Berlin: Jovis."},"extern":"1","title":"Das war nicht Monaco hier","publisher":"Jovis","page":"112","status":"public","abstract":[{"lang":"eng","text":"in Zusammenarbeit mit: Volker Maria Neumann, Klaus Overmeyer und Oliver Willing; Fotografien von Jens Bösenberg"}],"department":[{"_id":"DEP1025"},{"_id":"DEP1055"}],"year":"2010"},{"publication_status":"published","citation":{"chicago-de":"Häusler, Axel. 2010. Fehler sind notwendig. Urban Spacemag 3.","din1505-2-1":"Häusler, Axel: Fehler sind notwendig. In: Urban Spacemag Bd. 3, Urban Spacemag (2010)","short":"A. Häusler, Urban Spacemag 3 (2010).","ufg":"Häusler, Axel: Fehler sind notwendig, in: Urban Spacemag 3 (2010).","bjps":"Häusler A (2010) Fehler sind notwendig. Urban Spacemag 3.","havard":"A. Häusler, Fehler sind notwendig, Urban Spacemag . 3 (2010).","mla":"Häusler, Axel. “Fehler sind notwendig.” Urban Spacemag , vol. 3, 2010.","van":"Häusler A. Fehler sind notwendig. Urban Spacemag . 2010;3.","chicago":"Häusler, Axel. “Fehler sind notwendig.” Urban Spacemag 3 (2010).","apa":"Häusler, A. (2010). Fehler sind notwendig. Urban Spacemag , 3.","ama":"Häusler A. Fehler sind notwendig. Urban Spacemag . 2010;3.","ieee":"A. Häusler, “Fehler sind notwendig,” Urban Spacemag , vol. 3, 2010."},"volume":3,"extern":"1","title":"Fehler sind notwendig","status":"public","publisher":"Urban Spacemag","department":[{"_id":"DEP1025"},{"_id":"DEP1055"}],"author":[{"first_name":"Axel","last_name":"Häusler","full_name":"Häusler, Axel","id":"61520"}],"year":"2010","date_updated":"2023-09-20T14:25:59Z","user_id":"83781","intvolume":" 3","date_created":"2021-04-30T15:55:02Z","type":"journal_article","publication_identifier":{"issn":["2190-1597"]},"publication":"Urban Spacemag ","language":[{"iso":"ger"}],"_id":"5757","alternative_title":["Von der Komplexität räumlicher Nähe"]},{"date_created":"2021-09-06T11:14:51Z","type":"conference","date_updated":"2023-03-15T13:50:03Z","user_id":"45673","language":[{"iso":"eng"}],"_id":"6143","title":"Die Phytoextraktion mit Tensid-Wasser-Systemen am Beispiel der Triterpengewinnung aus Salbei","citation":{"van":"Schneider P, Bischoff F, Müller U, Bart H-J, Schlitter K, Jordan V. Die Phytoextraktion mit Tensid-Wasser-Systemen am Beispiel der Triterpengewinnung aus Salbei. In 2010.","ama":"Schneider P, Bischoff F, Müller U, Bart H-J, Schlitter K, Jordan V. Die Phytoextraktion mit Tensid-Wasser-Systemen am Beispiel der Triterpengewinnung aus Salbei. In: ; 2010.","ufg":"Schneider, P. et. al. (2010): Die Phytoextraktion mit Tensid-Wasser-Systemen am Beispiel der Triterpengewinnung aus Salbei, in: .","havard":"P. Schneider, F. Bischoff, U. Müller, H.-J. Bart, K. Schlitter, V. Jordan, Die Phytoextraktion mit Tensid-Wasser-Systemen am Beispiel der Triterpengewinnung aus Salbei, in: 2010.","bjps":"Schneider P et al. (2010) Die Phytoextraktion Mit Tensid-Wasser-Systemen Am Beispiel Der Triterpengewinnung Aus Salbei.","mla":"Schneider, P., et al. Die Phytoextraktion Mit Tensid-Wasser-Systemen Am Beispiel Der Triterpengewinnung Aus Salbei. 2010.","apa":"Schneider, P., Bischoff, F., Müller, U., Bart, H.-J., Schlitter, K., & Jordan, V. (2010). Die Phytoextraktion mit Tensid-Wasser-Systemen am Beispiel der Triterpengewinnung aus Salbei. Presented at the ProcessNet-TAK „Phytoextrakte, Karlsruhe.","ieee":"P. Schneider, F. Bischoff, U. Müller, H.-J. Bart, K. Schlitter, and V. Jordan, “Die Phytoextraktion mit Tensid-Wasser-Systemen am Beispiel der Triterpengewinnung aus Salbei,” presented at the ProcessNet-TAK „Phytoextrakte, Karlsruhe, 2010.","chicago":"Schneider, P., F. Bischoff, Ulrich Müller, H.-J. Bart, K. Schlitter, and V. Jordan. “Die Phytoextraktion Mit Tensid-Wasser-Systemen Am Beispiel Der Triterpengewinnung Aus Salbei,” 2010.","short":"P. Schneider, F. Bischoff, U. Müller, H.-J. Bart, K. Schlitter, V. Jordan, in: 2010.","chicago-de":"Schneider, P., F. Bischoff, Ulrich Müller, H.-J. Bart, K. Schlitter und V. Jordan. 2010. Die Phytoextraktion mit Tensid-Wasser-Systemen am Beispiel der Triterpengewinnung aus Salbei. In: .","din1505-2-1":"Schneider, P. ; Bischoff, F. ; Müller, Ulrich ; Bart, H.-J. ; Schlitter, K. ; Jordan, V.: Die Phytoextraktion mit Tensid-Wasser-Systemen am Beispiel der Triterpengewinnung aus Salbei. In: , 2010"},"conference":{"start_date":"2010-03-09","end_date":"2010-03-10","name":"ProcessNet-TAK „Phytoextrakte","location":"Karlsruhe"},"department":[{"_id":"DEP4009"},{"_id":"DEP4023"}],"year":2010,"author":[{"last_name":"Schneider","full_name":"Schneider, P.","first_name":"P."},{"full_name":"Bischoff, F.","last_name":"Bischoff","first_name":"F."},{"last_name":"Müller","full_name":"Müller, Ulrich","id":"12119","first_name":"Ulrich"},{"last_name":"Bart","first_name":"H.-J.","full_name":"Bart, H.-J."},{"full_name":"Schlitter, K.","last_name":"Schlitter","first_name":"K."},{"last_name":"Jordan","first_name":"V.","full_name":"Jordan, V."}],"status":"public"},{"conference":{"location":"Bonn","name":"Informationsveranstaltung Mechanische Sattdampfbehandlung als innovatives Verfahren zur Verbesserung der mikrobiologischen Qualität, Forschungsvereinigung der Arzneimittelhersteller e.V. ","end_date":"2010-06-09","start_date":"2010-06-09"},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"year":2010,"author":[{"full_name":"Dammann_, Anna","id":"43899","first_name":"Anna","last_name":"Dammann_"},{"full_name":"Schwarzer, Knut","first_name":"Knut","last_name":"Schwarzer","id":"13329"},{"full_name":"Lange, H.","first_name":"H.","last_name":"Lange"},{"first_name":"H.","last_name":"Krüger","full_name":"Krüger, H."},{"first_name":"Ulrich","last_name":"Müller","full_name":"Müller, Ulrich","id":"12119"}],"status":"public","title":"Mechanische Sattdampfentkeimung – Alternative zu gängigen Entkeimungsverfahren","citation":{"chicago":"Dammann_, Anna, Knut Schwarzer, H. Lange, H. Krüger, and Ulrich Müller. “Mechanische Sattdampfentkeimung – Alternative Zu Gängigen Entkeimungsverfahren,” 2010.","ieee":"A. Dammann_, K. Schwarzer, H. Lange, H. Krüger, and U. Müller, “Mechanische Sattdampfentkeimung – Alternative zu gängigen Entkeimungsverfahren,” presented at the Informationsveranstaltung Mechanische Sattdampfbehandlung als innovatives Verfahren zur Verbesserung der mikrobiologischen Qualität, Forschungsvereinigung der Arzneimittelhersteller e.V. , Bonn, 2010.","apa":"Dammann_, A., Schwarzer, K., Lange, H., Krüger, H., & Müller, U. (2010). Mechanische Sattdampfentkeimung – Alternative zu gängigen Entkeimungsverfahren. Presented at the Informationsveranstaltung Mechanische Sattdampfbehandlung als innovatives Verfahren zur Verbesserung der mikrobiologischen Qualität, Forschungsvereinigung der Arzneimittelhersteller e.V. , Bonn.","havard":"A. Dammann_, K. Schwarzer, H. Lange, H. Krüger, U. Müller, Mechanische Sattdampfentkeimung – Alternative zu gängigen Entkeimungsverfahren, in: 2010.","bjps":"Dammann_ A et al. (2010) Mechanische Sattdampfentkeimung – Alternative Zu Gängigen Entkeimungsverfahren.","mla":"Dammann_, Anna, et al. Mechanische Sattdampfentkeimung – Alternative Zu Gängigen Entkeimungsverfahren. 2010.","ufg":"Dammann_, Anna et. al. (2010): Mechanische Sattdampfentkeimung – Alternative zu gängigen Entkeimungsverfahren, in: .","ama":"Dammann_ A, Schwarzer K, Lange H, Krüger H, Müller U. Mechanische Sattdampfentkeimung – Alternative zu gängigen Entkeimungsverfahren. In: ; 2010.","van":"Dammann_ A, Schwarzer K, Lange H, Krüger H, Müller U. Mechanische Sattdampfentkeimung – Alternative zu gängigen Entkeimungsverfahren. In 2010.","chicago-de":"Dammann_, Anna, Knut Schwarzer, H. Lange, H. Krüger und Ulrich Müller. 2010. Mechanische Sattdampfentkeimung – Alternative zu gängigen Entkeimungsverfahren. In: .","din1505-2-1":"Dammann_, Anna ; Schwarzer, Knut ; Lange, H. ; Krüger, H. ; Müller, Ulrich: Mechanische Sattdampfentkeimung – Alternative zu gängigen Entkeimungsverfahren. In: , 2010","short":"A. Dammann_, K. Schwarzer, H. Lange, H. Krüger, U. Müller, in: 2010."},"_id":"6144","language":[{"iso":"eng"}],"date_created":"2021-09-06T11:17:31Z","type":"conference","date_updated":"2023-03-15T13:50:03Z","user_id":"45673"},{"language":[{"iso":"eng"}],"_id":"6145","date_created":"2021-09-06T11:19:36Z","type":"conference","date_updated":"2023-03-15T13:50:03Z","user_id":"45673","department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"conference":{"name":"Informationsveranstaltung Mechanische Sattdampfbehandlung als innovatives Verfahren zur Verbesserung der mikrobiologischen Qualität, Forschungsvereinigung der Arzneimittelhersteller e.V. ","location":"Bonn","start_date":"2010-06-09","end_date":"2010-06-09"},"author":[{"first_name":"H.","full_name":"Lange, H.","last_name":"Lange"},{"id":"43899","first_name":"Anna","full_name":"Dammann_, Anna","last_name":"Dammann_"},{"full_name":"Schwarzer, Knut","first_name":"Knut","last_name":"Schwarzer","id":"13329"},{"full_name":"Krüger, H.","first_name":"H.","last_name":"Krüger"},{"full_name":"Müller, Ulrich","id":"12119","first_name":"Ulrich","last_name":"Müller"}],"year":2010,"status":"public","title":"Beeinflussung des Mikroorganismengehalts und der wertgebenden Inhaltsstoffe durch die Mechanische Sattdampfentkeimung","citation":{"ama":"Lange H, Dammann_ A, Schwarzer K, Krüger H, Müller U. Beeinflussung des Mikroorganismengehalts und der wertgebenden Inhaltsstoffe durch die Mechanische Sattdampfentkeimung. In: ; 2010.","ieee":"H. Lange, A. Dammann_, K. Schwarzer, H. Krüger, and U. Müller, “Beeinflussung des Mikroorganismengehalts und der wertgebenden Inhaltsstoffe durch die Mechanische Sattdampfentkeimung,” presented at the Informationsveranstaltung Mechanische Sattdampfbehandlung als innovatives Verfahren zur Verbesserung der mikrobiologischen Qualität, Forschungsvereinigung der Arzneimittelhersteller e.V. , Bonn, 2010.","havard":"H. Lange, A. Dammann_, K. Schwarzer, H. Krüger, U. Müller, Beeinflussung des Mikroorganismengehalts und der wertgebenden Inhaltsstoffe durch die Mechanische Sattdampfentkeimung, in: 2010.","bjps":"Lange H et al. (2010) Beeinflussung Des Mikroorganismengehalts Und Der Wertgebenden Inhaltsstoffe Durch Die Mechanische Sattdampfentkeimung.","mla":"Lange, H., et al. Beeinflussung Des Mikroorganismengehalts Und Der Wertgebenden Inhaltsstoffe Durch Die Mechanische Sattdampfentkeimung. 2010.","ufg":"Lange, H. et. al. (2010): Beeinflussung des Mikroorganismengehalts und der wertgebenden Inhaltsstoffe durch die Mechanische Sattdampfentkeimung, in: .","van":"Lange H, Dammann_ A, Schwarzer K, Krüger H, Müller U. Beeinflussung des Mikroorganismengehalts und der wertgebenden Inhaltsstoffe durch die Mechanische Sattdampfentkeimung. In 2010.","chicago":"Lange, H., Anna Dammann_, Knut Schwarzer, H. Krüger, and Ulrich Müller. “Beeinflussung Des Mikroorganismengehalts Und Der Wertgebenden Inhaltsstoffe Durch Die Mechanische Sattdampfentkeimung,” 2010.","apa":"Lange, H., Dammann_, A., Schwarzer, K., Krüger, H., & Müller, U. (2010). Beeinflussung des Mikroorganismengehalts und der wertgebenden Inhaltsstoffe durch die Mechanische Sattdampfentkeimung. Presented at the Informationsveranstaltung Mechanische Sattdampfbehandlung als innovatives Verfahren zur Verbesserung der mikrobiologischen Qualität, Forschungsvereinigung der Arzneimittelhersteller e.V. , Bonn.","din1505-2-1":"Lange, H. ; Dammann_, Anna ; Schwarzer, Knut ; Krüger, H. ; Müller, Ulrich: Beeinflussung des Mikroorganismengehalts und der wertgebenden Inhaltsstoffe durch die Mechanische Sattdampfentkeimung. In: , 2010","chicago-de":"Lange, H., Anna Dammann_, Knut Schwarzer, H. Krüger und Ulrich Müller. 2010. Beeinflussung des Mikroorganismengehalts und der wertgebenden Inhaltsstoffe durch die Mechanische Sattdampfentkeimung. In: .","short":"H. Lange, A. Dammann_, K. Schwarzer, H. Krüger, U. Müller, in: 2010."}},{"citation":{"chicago":"Schwarzer, Knut, H. Lange, Anna Dammann_, H. Krüger, and Ulrich Müller. “Medizinaldrogen, Kräuter Und Mehr - Mögliche Einsatzgebiete Der Mechanischen Sattdampfentkeimung,” 2010.","apa":"Schwarzer, K., Lange, H., Dammann_, A., Krüger, H., & Müller, U. (2010). Medizinaldrogen, Kräuter und mehr - Mögliche Einsatzgebiete der Mechanischen Sattdampfentkeimung. Presented at the Informationsveranstaltung Mechanische Sattdampfbehandlung als innovatives Verfahren zur Verbesserung der mikrobiologischen Qualität, Forschungsvereinigung der Arzneimittelhersteller e.V., Bonn.","ieee":"K. Schwarzer, H. Lange, A. Dammann_, H. Krüger, and U. Müller, “Medizinaldrogen, Kräuter und mehr - Mögliche Einsatzgebiete der Mechanischen Sattdampfentkeimung,” presented at the Informationsveranstaltung Mechanische Sattdampfbehandlung als innovatives Verfahren zur Verbesserung der mikrobiologischen Qualität, Forschungsvereinigung der Arzneimittelhersteller e.V., Bonn, 2010.","ufg":"Schwarzer, Knut et. al. (2010): Medizinaldrogen, Kräuter und mehr - Mögliche Einsatzgebiete der Mechanischen Sattdampfentkeimung, in: .","havard":"K. Schwarzer, H. Lange, A. Dammann_, H. Krüger, U. Müller, Medizinaldrogen, Kräuter und mehr - Mögliche Einsatzgebiete der Mechanischen Sattdampfentkeimung, in: 2010.","mla":"Schwarzer, Knut, et al. Medizinaldrogen, Kräuter Und Mehr - Mögliche Einsatzgebiete Der Mechanischen Sattdampfentkeimung. 2010.","bjps":"Schwarzer K et al. (2010) Medizinaldrogen, Kräuter Und Mehr - Mögliche Einsatzgebiete Der Mechanischen Sattdampfentkeimung.","van":"Schwarzer K, Lange H, Dammann_ A, Krüger H, Müller U. Medizinaldrogen, Kräuter und mehr - Mögliche Einsatzgebiete der Mechanischen Sattdampfentkeimung. In 2010.","ama":"Schwarzer K, Lange H, Dammann_ A, Krüger H, Müller U. Medizinaldrogen, Kräuter und mehr - Mögliche Einsatzgebiete der Mechanischen Sattdampfentkeimung. In: ; 2010.","chicago-de":"Schwarzer, Knut, H. Lange, Anna Dammann_, H. Krüger und Ulrich Müller. 2010. Medizinaldrogen, Kräuter und mehr - Mögliche Einsatzgebiete der Mechanischen Sattdampfentkeimung. In: .","din1505-2-1":"Schwarzer, Knut ; Lange, H. ; Dammann_, Anna ; Krüger, H. ; Müller, Ulrich: Medizinaldrogen, Kräuter und mehr - Mögliche Einsatzgebiete der Mechanischen Sattdampfentkeimung. In: , 2010","short":"K. Schwarzer, H. Lange, A. Dammann_, H. Krüger, U. Müller, in: 2010."},"title":"Medizinaldrogen, Kräuter und mehr - Mögliche Einsatzgebiete der Mechanischen Sattdampfentkeimung","status":"public","author":[{"first_name":"Knut","last_name":"Schwarzer","full_name":"Schwarzer, Knut","id":"13329"},{"last_name":"Lange","full_name":"Lange, H.","first_name":"H."},{"first_name":"Anna","full_name":"Dammann_, Anna","last_name":"Dammann_","id":"43899"},{"first_name":"H.","full_name":"Krüger, H.","last_name":"Krüger"},{"last_name":"Müller","id":"12119","first_name":"Ulrich","full_name":"Müller, Ulrich"}],"year":2010,"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"conference":{"end_date":"2010-06-09","start_date":"2010-06-09","location":"Bonn","name":"Informationsveranstaltung Mechanische Sattdampfbehandlung als innovatives Verfahren zur Verbesserung der mikrobiologischen Qualität, Forschungsvereinigung der Arzneimittelhersteller e.V."},"user_id":"45673","date_updated":"2023-03-15T13:50:03Z","type":"conference","date_created":"2021-09-06T11:21:34Z","language":[{"iso":"eng"}],"_id":"6146"},{"language":[{"iso":"eng"}],"_id":"6147","date_updated":"2023-03-15T13:50:03Z","user_id":"45673","type":"conference","date_created":"2021-09-06T11:23:03Z","status":"public","conference":{"name":"GDL-Symposium Technologie der Kräuter und Gewürze III","location":"Nuthetal","end_date":"2010-06-23","start_date":"2010-06-22"},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"author":[{"full_name":"Müller, Ulrich","last_name":"Müller","id":"12119","first_name":"Ulrich"}],"year":2010,"citation":{"ama":"Müller U. Stand der Sattdampfentkeimung bei pflanzlichen Materialien. In: ; 2010.","ieee":"U. Müller, “Stand der Sattdampfentkeimung bei pflanzlichen Materialien,” presented at the GDL-Symposium Technologie der Kräuter und Gewürze III, Nuthetal, 2010.","van":"Müller U. Stand der Sattdampfentkeimung bei pflanzlichen Materialien. In 2010.","ufg":"Müller, Ulrich (2010): Stand der Sattdampfentkeimung bei pflanzlichen Materialien, in: .","bjps":"Müller U (2010) Stand Der Sattdampfentkeimung Bei Pflanzlichen Materialien.","mla":"Müller, Ulrich. Stand Der Sattdampfentkeimung Bei Pflanzlichen Materialien. 2010.","havard":"U. Müller, Stand der Sattdampfentkeimung bei pflanzlichen Materialien, in: 2010.","apa":"Müller, U. (2010). Stand der Sattdampfentkeimung bei pflanzlichen Materialien. Presented at the GDL-Symposium Technologie der Kräuter und Gewürze III, Nuthetal.","chicago":"Müller, Ulrich. “Stand Der Sattdampfentkeimung Bei Pflanzlichen Materialien,” 2010.","short":"U. Müller, in: 2010.","din1505-2-1":"Müller, Ulrich: Stand der Sattdampfentkeimung bei pflanzlichen Materialien. In: , 2010","chicago-de":"Müller, Ulrich. 2010. Stand der Sattdampfentkeimung bei pflanzlichen Materialien. In: ."},"title":"Stand der Sattdampfentkeimung bei pflanzlichen Materialien"},{"_id":"6148","language":[{"iso":"eng"}],"user_id":"45673","date_updated":"2023-03-15T13:50:03Z","date_created":"2021-09-06T11:25:40Z","type":"conference","status":"public","year":2010,"author":[{"last_name":"Lange","full_name":"Lange, H.","first_name":"H."},{"first_name":"Knut","last_name":"Schwarzer","id":"13329","full_name":"Schwarzer, Knut"},{"last_name":"Dammann_","full_name":"Dammann_, Anna","id":"43899","first_name":"Anna"},{"last_name":"H.","full_name":"H., Krüger","first_name":"Krüger"},{"first_name":"Ulrich","full_name":"Müller, Ulrich","last_name":"Müller","id":"12119"}],"conference":{"start_date":"2010-09-20","end_date":"2010-09-22","location":"Stuttgart-Hohenheim","name":"39. Deutscher Lebensmittelchemikertag"},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"citation":{"short":"H. Lange, K. Schwarzer, A. Dammann_, K. H., U. Müller, in: 2010.","din1505-2-1":"Lange, H. ; Schwarzer, Knut ; Dammann_, Anna ; H., Krüger ; Müller, Ulrich: Mechanische Sattdampfentkeimung von Arznei- und Gewürzpflanzen. In: , 2010","chicago-de":"Lange, H., Knut Schwarzer, Anna Dammann_, Krüger H. und Ulrich Müller. 2010. Mechanische Sattdampfentkeimung von Arznei- und Gewürzpflanzen. In: .","van":"Lange H, Schwarzer K, Dammann_ A, H. K, Müller U. Mechanische Sattdampfentkeimung von Arznei- und Gewürzpflanzen. In 2010.","ufg":"Lange, H. et. al. (2010): Mechanische Sattdampfentkeimung von Arznei- und Gewürzpflanzen, in: .","bjps":"Lange H et al. (2010) Mechanische Sattdampfentkeimung von Arznei- Und Gewürzpflanzen.","havard":"H. Lange, K. Schwarzer, A. Dammann_, K. H., U. Müller, Mechanische Sattdampfentkeimung von Arznei- und Gewürzpflanzen, in: 2010.","mla":"Lange, H., et al. Mechanische Sattdampfentkeimung von Arznei- Und Gewürzpflanzen. 2010.","apa":"Lange, H., Schwarzer, K., Dammann_, A., H., K., & Müller, U. (2010). Mechanische Sattdampfentkeimung von Arznei- und Gewürzpflanzen. Presented at the 39. Deutscher Lebensmittelchemikertag, Stuttgart-Hohenheim.","chicago":"Lange, H., Knut Schwarzer, Anna Dammann_, Krüger H., and Ulrich Müller. “Mechanische Sattdampfentkeimung von Arznei- Und Gewürzpflanzen,” 2010.","ama":"Lange H, Schwarzer K, Dammann_ A, H. K, Müller U. Mechanische Sattdampfentkeimung von Arznei- und Gewürzpflanzen. In: ; 2010.","ieee":"H. Lange, K. Schwarzer, A. Dammann_, K. H., and U. Müller, “Mechanische Sattdampfentkeimung von Arznei- und Gewürzpflanzen,” presented at the 39. Deutscher Lebensmittelchemikertag, Stuttgart-Hohenheim, 2010."},"title":"Mechanische Sattdampfentkeimung von Arznei- und Gewürzpflanzen"},{"language":[{"iso":"eng"}],"_id":"6149","type":"conference_abstract","date_created":"2021-09-06T11:27:42Z","date_updated":"2023-03-15T13:50:03Z","user_id":"45673","department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"conference":{"location":"Aachen","name":"ProcessNet-JT 2010 und 28. DECHEMA-JT der Biotechnologen","start_date":"2010-09-21","end_date":"2010-09-23"},"year":2010,"author":[{"first_name":"H.","last_name":"Lange","full_name":"Lange, H."},{"full_name":"Krüger, H.","first_name":"H.","last_name":"Krüger"},{"last_name":"Dammann_","id":"43899","full_name":"Dammann_, Anna","first_name":"Anna"},{"id":"13329","first_name":"Knut","full_name":"Schwarzer, Knut","last_name":"Schwarzer"},{"first_name":"Ulrich","last_name":"Müller","full_name":"Müller, Ulrich","id":"12119"}],"status":"public","title":"Wirkstoffgehalte von Medizinaldrogen nach mechanischen Sattdampfentkeimungen","citation":{"van":"Lange H, Krüger H, Dammann_ A, Schwarzer K, Müller U. Wirkstoffgehalte von Medizinaldrogen nach mechanischen Sattdampfentkeimungen. In 2010.","ama":"Lange H, Krüger H, Dammann_ A, Schwarzer K, Müller U. Wirkstoffgehalte von Medizinaldrogen nach mechanischen Sattdampfentkeimungen. In: ; 2010.","ufg":"Lange, H. et. al. (2010): Wirkstoffgehalte von Medizinaldrogen nach mechanischen Sattdampfentkeimungen, in: .","mla":"Lange, H., et al. Wirkstoffgehalte von Medizinaldrogen Nach Mechanischen Sattdampfentkeimungen. 2010.","havard":"H. Lange, H. Krüger, A. Dammann_, K. Schwarzer, U. Müller, Wirkstoffgehalte von Medizinaldrogen nach mechanischen Sattdampfentkeimungen, in: 2010.","bjps":"Lange H et al. (2010) Wirkstoffgehalte von Medizinaldrogen Nach Mechanischen Sattdampfentkeimungen.","apa":"Lange, H., Krüger, H., Dammann_, A., Schwarzer, K., & Müller, U. (2010). Wirkstoffgehalte von Medizinaldrogen nach mechanischen Sattdampfentkeimungen. Presented at the ProcessNet-JT 2010 und 28. DECHEMA-JT der Biotechnologen, Aachen.","ieee":"H. Lange, H. Krüger, A. Dammann_, K. Schwarzer, and U. Müller, “Wirkstoffgehalte von Medizinaldrogen nach mechanischen Sattdampfentkeimungen,” presented at the ProcessNet-JT 2010 und 28. DECHEMA-JT der Biotechnologen, Aachen, 2010.","chicago":"Lange, H., H. Krüger, Anna Dammann_, Knut Schwarzer, and Ulrich Müller. “Wirkstoffgehalte von Medizinaldrogen Nach Mechanischen Sattdampfentkeimungen,” 2010.","short":"H. Lange, H. Krüger, A. Dammann_, K. Schwarzer, U. Müller, in: 2010.","chicago-de":"Lange, H., H. Krüger, Anna Dammann_, Knut Schwarzer und Ulrich Müller. 2010. Wirkstoffgehalte von Medizinaldrogen nach mechanischen Sattdampfentkeimungen. In: .","din1505-2-1":"Lange, H. ; Krüger, H. ; Dammann_, Anna ; Schwarzer, Knut ; Müller, Ulrich: Wirkstoffgehalte von Medizinaldrogen nach mechanischen Sattdampfentkeimungen. In: , 2010"}},{"title":"Emulsionsherstellung im industriellen Maßstab mittels Gegenstrominjektion","citation":{"chicago-de":"Müller, Ulrich. 2010. Emulsionsherstellung im industriellen Maßstab mittels Gegenstrominjektion. In: .","din1505-2-1":"Müller, Ulrich: Emulsionsherstellung im industriellen Maßstab mittels Gegenstrominjektion. In: , 2010","short":"U. Müller, in: 2010.","ufg":"Müller, Ulrich (2010): Emulsionsherstellung im industriellen Maßstab mittels Gegenstrominjektion, in: .","mla":"Müller, Ulrich. Emulsionsherstellung Im Industriellen Maßstab Mittels Gegenstrominjektion. 2010.","havard":"U. Müller, Emulsionsherstellung im industriellen Maßstab mittels Gegenstrominjektion, in: 2010.","bjps":"Müller U (2010) Emulsionsherstellung Im Industriellen Maßstab Mittels Gegenstrominjektion.","van":"Müller U. Emulsionsherstellung im industriellen Maßstab mittels Gegenstrominjektion. In 2010.","ama":"Müller U. Emulsionsherstellung im industriellen Maßstab mittels Gegenstrominjektion. In: ; 2010.","chicago":"Müller, Ulrich. “Emulsionsherstellung Im Industriellen Maßstab Mittels Gegenstrominjektion,” 2010.","apa":"Müller, U. (2010). Emulsionsherstellung im industriellen Maßstab mittels Gegenstrominjektion. Presented at the SEPAWA- Kongress 2010, Vortrag im Rahmen des „Forum für Neues“, Fulda.","ieee":"U. Müller, “Emulsionsherstellung im industriellen Maßstab mittels Gegenstrominjektion,” presented at the SEPAWA- Kongress 2010, Vortrag im Rahmen des „Forum für Neues“, Fulda, 2010."},"year":2010,"author":[{"first_name":"Ulrich","full_name":"Müller, Ulrich","id":"12119","last_name":"Müller"}],"conference":{"start_date":"2010-10-13","end_date":"2010-10-15","name":"SEPAWA- Kongress 2010, Vortrag im Rahmen des „Forum für Neues“","location":"Fulda"},"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"status":"public","type":"conference","date_created":"2021-09-06T11:29:03Z","user_id":"45673","date_updated":"2023-03-15T13:50:03Z","_id":"6150","language":[{"iso":"eng"}]},{"title":"Die 'Lemgo D- and z-value Database for Food' (LDzBase) - ein Werkzeug zur genaueren Parametrierung von Entkeimungen in der Lebensmittelindustrie","citation":{"short":"K. Schwarzer, P. Wilhelm, H. Krüger, H. Lange, U. Müller, in: 2010.","chicago-de":"Schwarzer, Knut, Patrick Wilhelm, H. Krüger, H. Lange und Ulrich Müller. 2010. Die „Lemgo D- and z-value Database for Food“ (LDzBase) - ein Werkzeug zur genaueren Parametrierung von Entkeimungen in der Lebensmittelindustrie. In: .","din1505-2-1":"Schwarzer, Knut ; Wilhelm, Patrick ; Krüger, H. ; Lange, H. ; Müller, Ulrich: Die „Lemgo D- and z-value Database for Food“ (LDzBase) - ein Werkzeug zur genaueren Parametrierung von Entkeimungen in der Lebensmittelindustrie. In: , 2010","apa":"Schwarzer, K., Wilhelm, P., Krüger, H., Lange, H., & Müller, U. (2010). Die “Lemgo D- and z-value Database for Food” (LDzBase) - ein Werkzeug zur genaueren Parametrierung von Entkeimungen in der Lebensmittelindustrie. Presented at the 7. Lemgoer Nachmittag zu Entkeimungsfragen, Lemgo.","ieee":"K. Schwarzer, P. Wilhelm, H. Krüger, H. Lange, and U. Müller, “Die ‘Lemgo D- and z-value Database for Food’ (LDzBase) - ein Werkzeug zur genaueren Parametrierung von Entkeimungen in der Lebensmittelindustrie,” presented at the 7. Lemgoer Nachmittag zu Entkeimungsfragen, Lemgo, 2010.","chicago":"Schwarzer, Knut, Patrick Wilhelm, H. Krüger, H. Lange, and Ulrich Müller. “Die ‘Lemgo D- and z-Value Database for Food’ (LDzBase) - Ein Werkzeug Zur Genaueren Parametrierung von Entkeimungen in Der Lebensmittelindustrie,” 2010.","van":"Schwarzer K, Wilhelm P, Krüger H, Lange H, Müller U. Die “Lemgo D- and z-value Database for Food” (LDzBase) - ein Werkzeug zur genaueren Parametrierung von Entkeimungen in der Lebensmittelindustrie. In 2010.","ama":"Schwarzer K, Wilhelm P, Krüger H, Lange H, Müller U. Die “Lemgo D- and z-value Database for Food” (LDzBase) - ein Werkzeug zur genaueren Parametrierung von Entkeimungen in der Lebensmittelindustrie. In: ; 2010.","ufg":"Schwarzer, Knut et. al. (2010): Die „Lemgo D- and z-value Database for Food“ (LDzBase) - ein Werkzeug zur genaueren Parametrierung von Entkeimungen in der Lebensmittelindustrie, in: .","havard":"K. Schwarzer, P. Wilhelm, H. Krüger, H. Lange, U. Müller, Die “Lemgo D- and z-value Database for Food” (LDzBase) - ein Werkzeug zur genaueren Parametrierung von Entkeimungen in der Lebensmittelindustrie, in: 2010.","bjps":"Schwarzer K et al. (2010) Die ‘Lemgo D- and z-Value Database for Food’ (LDzBase) - Ein Werkzeug Zur Genaueren Parametrierung von Entkeimungen in Der Lebensmittelindustrie.","mla":"Schwarzer, Knut, et al. Die “Lemgo D- and z-Value Database for Food” (LDzBase) - Ein Werkzeug Zur Genaueren Parametrierung von Entkeimungen in Der Lebensmittelindustrie. 2010."},"year":2010,"author":[{"first_name":"Knut","last_name":"Schwarzer","id":"13329","full_name":"Schwarzer, Knut"},{"full_name":"Wilhelm, Patrick","first_name":"Patrick","last_name":"Wilhelm","id":"12013"},{"first_name":"H.","full_name":"Krüger, H.","last_name":"Krüger"},{"full_name":"Lange, H.","first_name":"H.","last_name":"Lange"},{"id":"12119","last_name":"Müller","first_name":"Ulrich","full_name":"Müller, Ulrich"}],"department":[{"_id":"DEP4023"},{"_id":"DEP4009"}],"conference":{"location":"Lemgo","name":"7. Lemgoer Nachmittag zu Entkeimungsfragen","end_date":"2010-12-10","start_date":"2010-12-10"},"status":"public","type":"conference","date_created":"2021-09-07T07:24:51Z","user_id":"45673","date_updated":"2023-03-15T13:50:04Z","language":[{"iso":"eng"}],"_id":"6161"}]