---
_id: '11373'
abstract:
- lang: eng
text: The topic of Product Lifecycle Management (PLM) should be nowadays part of
any engineering degree course in every university worldwide. In an increasingly
digital and connected world, students and prospective engineers need to know the
interrelationships of holistic product development. Excellent expertise in a discipline
such as mechanical engineering is still necessary, but no longer sufficient. This
article explains why this is the case and what universities can do to address
this issue. It describes in detail the PLM course of the OWL University of Applied
Sciences and Arts located in Lemgo, Germany. In addition, suggestions are made
on how to improve the course content, based on many years of experience. As such,
this article is a valuable source of information for anyone teaching PLM today
or intending to do so in the future.
author:
- first_name: Andreas
full_name: Deuter, Andreas
id: '62088'
last_name: Deuter
orcid: 0000-0002-6529-6215
- first_name: Andreas
full_name: Otte, Andreas
id: '51466'
last_name: Otte
citation:
ama: 'Deuter A, Otte A. PLM in Engineering Education: Purpose and Challenges. In:
Stark J, ed. Product Lifecycle Management (Volume 6) : Increasing the Value
of PLM with Innovative New Technologies. Decision Engineering. Springer Nature
Switzerland; 2024:215-231. doi:10.1007/978-3-031-53521-5_14'
apa: 'Deuter, A., & Otte, A. (2024). PLM in Engineering Education: Purpose and
Challenges. In J. Stark (Ed.), Product Lifecycle Management (Volume 6) : Increasing
the Value of PLM with Innovative New Technologies (pp. 215–231). Springer
Nature Switzerland. https://doi.org/10.1007/978-3-031-53521-5_14'
bjps: 'Deuter A and Otte A (2024) PLM in Engineering Education: Purpose and
Challenges. In Stark J (ed.), Product Lifecycle Management (Volume 6) : Increasing
the Value of PLM with Innovative New Technologies. Cham: Springer Nature Switzerland,
pp. 215–231.'
chicago: 'Deuter, Andreas, and Andreas Otte. “PLM in Engineering Education: Purpose
and Challenges.” In Product Lifecycle Management (Volume 6) : Increasing the
Value of PLM with Innovative New Technologies, edited by John Stark, 215–31.
Decision Engineering. Cham: Springer Nature Switzerland, 2024. https://doi.org/10.1007/978-3-031-53521-5_14.'
chicago-de: 'Deuter, Andreas und Andreas Otte. 2024. PLM in Engineering Education:
Purpose and Challenges. In: Product Lifecycle Management (Volume 6) : Increasing
the Value of PLM with Innovative New Technologies, hg. von John Stark, 215–231.
Decision Engineering. Cham: Springer Nature Switzerland. doi:10.1007/978-3-031-53521-5_14,
.'
din1505-2-1: 'Deuter, Andreas ; Otte, Andreas: PLM in Engineering Education:
Purpose and Challenges. In: Stark, J.
(Hrsg.): Product Lifecycle Management (Volume 6) : Increasing the Value of
PLM with Innovative New Technologies, Decision Engineering. Cham :
Springer Nature Switzerland, 2024, S. 215–231'
havard: 'A. Deuter, A. Otte, PLM in Engineering Education: Purpose and Challenges,
in: J. Stark (Ed.), Product Lifecycle Management (Volume 6) : Increasing the Value
of PLM with Innovative New Technologies, Springer Nature Switzerland, Cham, 2024:
pp. 215–231.'
ieee: 'A. Deuter and A. Otte, “PLM in Engineering Education: Purpose and Challenges,”
in Product Lifecycle Management (Volume 6) : Increasing the Value of PLM with
Innovative New Technologies, J. Stark, Ed. Cham: Springer Nature Switzerland,
2024, pp. 215–231. doi: 10.1007/978-3-031-53521-5_14.'
mla: 'Deuter, Andreas, and Andreas Otte. “PLM in Engineering Education: Purpose
and Challenges.” Product Lifecycle Management (Volume 6) : Increasing the Value
of PLM with Innovative New Technologies, edited by John Stark, Springer Nature
Switzerland, 2024, pp. 215–31, https://doi.org/10.1007/978-3-031-53521-5_14.'
short: 'A. Deuter, A. Otte, in: J. Stark (Ed.), Product Lifecycle Management (Volume
6) : Increasing the Value of PLM with Innovative New Technologies, Springer Nature
Switzerland, Cham, 2024, pp. 215–231.'
ufg: 'Deuter, Andreas/Otte, Andreas: PLM in Engineering Education: Purpose
and Challenges, in: Stark, John (Hg.): Product Lifecycle Management (Volume
6) : Increasing the Value of PLM with Innovative New Technologies, Cham 2024 (Decision
Engineering), S. 215–231.'
van: 'Deuter A, Otte A. PLM in Engineering Education: Purpose and Challenges. In:
Stark J, editor. Product Lifecycle Management (Volume 6) : Increasing the Value
of PLM with Innovative New Technologies. Cham: Springer Nature Switzerland; 2024.
p. 215–31. (Decision Engineering).'
date_created: 2024-04-25T12:09:54Z
date_updated: 2024-04-25T13:04:09Z
department:
- _id: DEP7022
- _id: DEP1306
- _id: DEP7001
doi: 10.1007/978-3-031-53521-5_14
editor:
- first_name: John
full_name: Stark, John
last_name: Stark
language:
- iso: eng
page: 215-231
place: Cham
popular_science: '1'
publication: 'Product Lifecycle Management (Volume 6) : Increasing the Value of PLM
with Innovative New Technologies'
publication_identifier:
eisbn:
- 978-3-031-53521-5
eissn:
- 2197-6589
isbn:
- 978-3-031-53520-8
issn:
- 1619-5736
publication_status: published
publisher: Springer Nature Switzerland
series_title: Decision Engineering
status: public
title: 'PLM in Engineering Education: Purpose and Challenges'
type: book_chapter
user_id: '83781'
year: '2024'
...
---
_id: '11666'
abstract:
- lang: ger
text: "Den Knoten entwirren\r\nAlles hängt mit allem zusammen. Was sich anhört wie
eine Binsenweisheit, ist in der Industrie tägliche Praxis geworden. Komplexität
und „Verschränktheit“ der Prozesse in Entwicklung und Produktion wachsen vielen
Unternehmen über den Kopf. Der Durchblick geht verloren, die Kosten laufen davon.\r\n\r\nDas
muss nicht so sein. Wie man der grassierenden Komplexität mit Methode zu Leibe
rückt, zeigt dieses elektronische Buch. Denn darum geht es in der Praxis: Trotz
vermeintlich intelligenter Systeme im Unternehmen den Überblick behalten und die
Komplexität beherrschen. \r\n\r\nMittel zum Zweck ist ein Assistenzsystem, das
im Rahmen eines Forschungsprojektes entwickelt wurde und jetzt für den Einsatz
bereitsteht. Damit das System nicht übergestülpt, sondern schrittweise erlernt
und wirklich gelebt werden kann, wird ein flankierendes Konzept zur Befähigung
präsentiert.\r\n\r\nDas Team um Herausgeber Andreas Deuter, seines Zeichens Professor
an der Technischen Hochschule Ostwestfalen-Lippe (TH OWL), hat ein kompaktes und
verständliches Buch verfasst. Ein echtes LOGiBit eben."
alternative_title:
- Strukturelle Produkt- und Prozesskomplexität beherrschen
author:
- first_name: Jan-Phillip
full_name: Herrmann, Jan-Phillip
id: '86180'
last_name: Herrmann
- first_name: Sebastian
full_name: Imort, Sebastian
id: '74291'
last_name: Imort
- first_name: Christoph
full_name: Trojanowski, Christoph
last_name: Trojanowski
- first_name: Carolin
full_name: Pankrath, Carolin
last_name: Pankrath
citation:
ama: Herrmann JP, Imort S, Trojanowski C, Pankrath C. Den Überblick behalten
. 1st ed. (Deuter A, ed.). LOG_X Verlag; 2024.
apa: Herrmann, J.-P., Imort, S., Trojanowski, C., & Pankrath, C. (2024). Den
Überblick behalten (A. Deuter, Ed.; 1st ed.). LOG_X Verlag.
bjps: 'Herrmann J-P et al. (2024) Den Überblick behalten ,
1st ed., Deuter A (ed.). Ludwigsburg: LOG_X Verlag.'
chicago: 'Herrmann, Jan-Phillip, Sebastian Imort, Christoph Trojanowski, and Carolin
Pankrath. Den Überblick behalten . Edited by Andreas Deuter. 1st ed. Ludwigsburg:
LOG_X Verlag, 2024.'
chicago-de: 'Herrmann, Jan-Phillip, Sebastian Imort, Christoph Trojanowski und Carolin
Pankrath. 2024. Den Überblick behalten . Hg. von Andreas Deuter. 1. Aufl.
Ludwigsburg: LOG_X Verlag.'
din1505-2-1: 'Herrmann, Jan-Phillip
; Imort, Sebastian ; Trojanowski,
Christoph ; Pankrath, Carolin
; Deuter, A. (Hrsg.): Den Überblick
behalten . 1. Aufl. Ludwigsburg : LOG_X Verlag, 2024'
havard: J.-P. Herrmann, S. Imort, C. Trojanowski, C. Pankrath, Den Überblick behalten
, 1st ed., LOG_X Verlag, Ludwigsburg, 2024.
ieee: 'J.-P. Herrmann, S. Imort, C. Trojanowski, and C. Pankrath, Den Überblick
behalten , 1st ed. Ludwigsburg: LOG_X Verlag, 2024.'
mla: Herrmann, Jan-Phillip, et al. Den Überblick behalten . Edited by Andreas
Deuter, 1st ed., LOG_X Verlag, 2024.
short: J.-P. Herrmann, S. Imort, C. Trojanowski, C. Pankrath, Den Überblick behalten
, 1st ed., LOG_X Verlag, Ludwigsburg, 2024.
ufg: 'Herrmann, Jan-Phillip u. a.: Den Überblick behalten , hg. von Deuter,
Andreas, Ludwigsburg 12024.'
van: 'Herrmann JP, Imort S, Trojanowski C, Pankrath C. Den Überblick behalten .
1st ed. Deuter A, editor. Ludwigsburg: LOG_X Verlag; 2024.'
date_created: 2024-07-08T10:10:08Z
date_updated: 2024-07-30T12:39:29Z
ddc:
- '006'
department:
- _id: DEP7022
- _id: DEP1306
- _id: DEP7001
edition: '1'
editor:
- first_name: Andreas
full_name: Deuter, Andreas
id: '62088'
last_name: Deuter
orcid: 0000-0002-6529-6215
file:
- access_level: local
content_type: application/pdf
creator: adm-hemke
date_created: 2024-07-18T14:35:21Z
date_updated: 2024-07-18T14:35:21Z
file_id: '11749'
file_name: 9783910483132_ePDF.pdf
file_size: 2788363
relation: main_file
file_date_updated: 2024-07-18T14:35:21Z
has_accepted_license: '1'
language:
- iso: ger
place: Ludwigsburg
publication_status: published
publisher: LOG_X Verlag
related_material:
link:
- relation: other
url: https://www.log-x.de/index.php/verlagsprogramm/238-den-ueberblick-behalten
status: public
title: 'Den Überblick behalten '
type: book
user_id: '83781'
year: '2024'
...
---
_id: '12992'
abstract:
- lang: eng
text: In today's technology-driven world, the need for interdisciplinary skills
is increasing. This has become challenging in tertiary education to provide students
with applicable knowledge of various fields. Anderson's Adaptive Control of Thought
(ACT) theory suggests that universities have traditionally focused on imparting
declarative knowledge, which involves memorization of facts and concepts. However,
imparting the ability to apply such knowledge on individual students and create
procedural knowledge is the challenge. This includes teachers dealing with a diverse
range of student abilities, particularly at university-level where they teach
the same course content to students with different levels of prior knowledge and,
given the structure of modern education systems, the resources required to monitor
and provide feedback for a number of decisions and attempts independently performed
by the students. Intelligent Tutoring Systems (ITS) have proven to be effective
in addressing the aforementioned challenges by creating personalized learning
environments that provide instant feedback, adapt to individual student needs,
and promote the development of procedural knowledge. In the field of automation
education at the university level, we are creating a 3D artificial intelligence
(AI)-based ITS software named KIAAA (An AI Assistant for teaching in the field
of automation), specifically designed to teach computer programming to students.
KIAAA aims to assist students in transitioning from their abilities to procedural
aptitude by providing personalized learning scenarios that allow them to apply
their knowledge and receive immediate feedback. Our approach is based mainly on
the pedagogical model of ITS, which focuses on creating a supportive and inclusive
learning environment that promotes success for all students, regardless of their
initial level of knowledge. One of the key aspects of our approach is the utilization
of personalized learning. We propose a scheme that, subsequent to evaluate student's
initial levels of procedural knowledge, creates 3D learning environments tailored
to each individual student. By analyzing the solutions proposed by the students,
we select the difficulty level of subsequent tasks. This approach takes into consideration
student's discrete competence throughout the learning process, enabling them to
progress on their prior knowledge. Additionally, the software provides customized
feedback to each student on their performance, helping students identify areas
that require improvement. Concepts for and implementations of ITS for a variety
of fields, including introductory programming classes, have evolved for a long
time. Our main contribution lies in presenting an end to end solution for ITS
focused on teaching programming for automation students with realistically 3D
simulated factory environments. While we strongly believe to have created a pedagogically
sound, integrated intelligent teaching system for assisting programming classes
in tertiary automation education, a robust user study for methodically evaluating
our concept and implementation is still to be performed. Thus, we limit ourselves
to presenting the underlying didactic concepts of KIAAA as a work in progress
paper with a comprehensive evaluation to follow at a later date.
author:
- first_name: Asmar
full_name: Ali, Asmar
id: '78685'
last_name: Ali
- first_name: Andreas
full_name: Deuter, Andreas
id: '62088'
last_name: Deuter
orcid: 0000-0002-6529-6215
- first_name: Leon
full_name: Wehmeier, Leon
id: '81257'
last_name: Wehmeier
citation:
ama: 'Ali A, Deuter A, Wehmeier L. Personalized Learning in Automation: A 3D
AI-Based Approach. (IEEE ASEE Frontiers in Education Conference, Institute
of Electrical and Electronics Engineers, American Society for Engineering Education,
eds.). IEEE; 2024. doi:10.1109/fie58773.2023.10343228'
apa: 'Ali, A., Deuter, A., & Wehmeier, L. (2024). Personalized Learning in Automation:
A 3D AI-Based Approach. In IEEE ASEE Frontiers in Education Conference, Institute
of Electrical and Electronics Engineers, & American Society for Engineering
Education (Eds.), FIE 2023 : College Station, TX, USA, October 18-21, 2023 :
conference proceedings / 2023 IEEE Frontiers in Education Conference (FIE).
IEEE. https://doi.org/10.1109/fie58773.2023.10343228'
bjps: 'Ali A, Deuter A and Wehmeier L (2024) Personalized Learning in
Automation: A 3D AI-Based Approach, IEEE ASEE Frontiers in Education Conference,
Institute of Electrical and Electronics Engineers, and American Society for Engineering
Education (eds). [Piscataway, NJ]: IEEE.'
chicago: 'Ali, Asmar, Andreas Deuter, and Leon Wehmeier. Personalized Learning
in Automation: A 3D AI-Based Approach. Edited by IEEE ASEE Frontiers in Education
Conference, Institute of Electrical and Electronics Engineers, and American Society
for Engineering Education. FIE 2023 : College Station, TX, USA, October 18-21,
2023 : Conference Proceedings / 2023 IEEE Frontiers in Education Conference (FIE).
[Piscataway, NJ]: IEEE, 2024. https://doi.org/10.1109/fie58773.2023.10343228.'
chicago-de: 'Ali, Asmar, Andreas Deuter und Leon Wehmeier. 2024. Personalized
Learning in Automation: A 3D AI-Based Approach. Hg. von IEEE ASEE Frontiers
in Education Conference, Institute of Electrical and Electronics Engineers, und
American Society for Engineering Education. FIE 2023 : College Station, TX,
USA, October 18-21, 2023 : conference proceedings / 2023 IEEE Frontiers in Education
Conference (FIE). [Piscataway, NJ]: IEEE. doi:10.1109/fie58773.2023.10343228,
.'
din1505-2-1: 'Ali, Asmar ; Deuter,
Andreas ; Wehmeier, Leon
; IEEE ASEE Frontiers in Education Conference
; Institute of Electrical and Electronics
Engineers ; American Society for
Engineering Education (Hrsg.): Personalized Learning in Automation:
A 3D AI-Based Approach. [Piscataway, NJ] : IEEE, 2024'
havard: 'A. Ali, A. Deuter, L. Wehmeier, Personalized Learning in Automation: A
3D AI-Based Approach, IEEE, [Piscataway, NJ], 2024.'
ieee: 'A. Ali, A. Deuter, and L. Wehmeier, Personalized Learning in Automation:
A 3D AI-Based Approach. [Piscataway, NJ]: IEEE, 2024. doi: 10.1109/fie58773.2023.10343228.'
mla: 'Ali, Asmar, et al. “Personalized Learning in Automation: A 3D AI-Based Approach.”
FIE 2023 : College Station, TX, USA, October 18-21, 2023 : Conference Proceedings
/ 2023 IEEE Frontiers in Education Conference (FIE), edited by IEEE ASEE Frontiers
in Education Conference et al., IEEE, 2024, https://doi.org/10.1109/fie58773.2023.10343228.'
short: 'A. Ali, A. Deuter, L. Wehmeier, Personalized Learning in Automation: A 3D
AI-Based Approach, IEEE, [Piscataway, NJ], 2024.'
ufg: 'Ali, Asmar/Deuter, Andreas/Wehmeier, Leon: Personalized Learning in
Automation: A 3D AI-Based Approach, hg. von IEEE ASEE Frontiers in Education Conference/Institute
of Electrical and Electronics Engineers, American Society for Engineering Education,
[Piscataway, NJ] 2024.'
van: 'Ali A, Deuter A, Wehmeier L. Personalized Learning in Automation: A 3D AI-Based
Approach. IEEE ASEE Frontiers in Education Conference, Institute of Electrical
and Electronics Engineers, American Society for Engineering Education, editors.
FIE 2023 : College Station, TX, USA, October 18-21, 2023 : conference proceedings
/ 2023 IEEE Frontiers in Education Conference (FIE). [Piscataway, NJ]: IEEE; 2024.'
conference:
end_date: 2023-10-21
location: Texas
name: 2023 IEEE Frontiers in Education Conference (FIE)
start_date: 2023-10-18
corporate_editor:
- IEEE ASEE Frontiers in Education Conference
- Institute of Electrical and Electronics Engineers
- American Society for Engineering Education
date_created: 2025-06-18T12:57:37Z
date_updated: 2025-06-18T13:01:55Z
department:
- _id: DEP7022
- _id: DEP1306
- _id: DEP7001
doi: 10.1109/fie58773.2023.10343228
language:
- iso: eng
place: '[Piscataway, NJ]'
publication: 'FIE 2023 : College Station, TX, USA, October 18-21, 2023 : conference
proceedings / 2023 IEEE Frontiers in Education Conference (FIE)'
publication_identifier:
eisbn:
- 979-8-3503-3642-9
isbn:
- 979-8-3503-3643-6
publication_status: published
publisher: IEEE
status: public
title: 'Personalized Learning in Automation: A 3D AI-Based Approach'
type: conference_editor_article
user_id: '83781'
year: '2024'
...
---
_id: '12993'
abstract:
- lang: eng
text: In computer science and related technical fields, researchers, educators,
and practitioners are continuously automating recurring tasks for high efficiency
in a wide variety of fields. In higher education, such tasks that educators face
are the recurring review and assessment process of students' programming coursework.
Thus, various attempts exist to automate the assessment and feedback generation
for course homework and practicals in higher education. Those approaches for automated
programming task assessment often comprise running automated tests to check for
limited functional correctness and potentially style checking for various violations
(LINTing). Educators familiar with large-scale automated task assessment are likely
used to seeing hard-coded solutions specifically or accidentally designed to just
pass the required tests, ignoring or misinterpreting the actual task requirements.
Detecting such issues in arbitrary code is non-trivial and an ongoing research
topic in software engineering. Software engineering research has yielded various
semantic analysis frameworks, such as GitHub's CodeQL, which can be adapted for
programming task assessment. We present a work-in-progress programming task analysis
framework which employs CodeQL's analysis technology to identify the actual use
of task-description-mandated syntactic and semantic elements such as loop structures
or the use of mandated data blocks in branching conditions. This allows extending
existing course work analysis frameworks to include a semantic check of an uploaded
program which exceeds the relatively simple set of input-output test cases provided
by unit tests. We use a running example of entry level programming tasks and several
solution attempts to introduce and explain our proposed control flow and data
flow -based analysis method. We discuss the benefits of including semantic analysis
as an additional method in the automated programming task assessment toolbox.
Our main contribution is the adaptation of an semantic analysis code framework
to analyse syntactic and semantic components in students' programming coursework.
author:
- first_name: Leon
full_name: Wehmeier, Leon
id: '81257'
last_name: Wehmeier
- first_name: Sebastian
full_name: Eilermann, Sebastian
last_name: Eilermann
- first_name: Oliver
full_name: Niggemann, Oliver
id: '10876'
last_name: Niggemann
- first_name: Andreas
full_name: Deuter, Andreas
id: '62088'
last_name: Deuter
orcid: 0000-0002-6529-6215
citation:
ama: Wehmeier L, Eilermann S, Niggemann O, Deuter A. Task-Fidelity Assessment
for Programming Tasks Using Semantic Code Analysis. (IEEE ASEE Frontiers in
Education Conference, Institute of Electrical and Electronics Engineers, American
Society for Engineering Education, eds.). IEEE; 2024. doi:10.1109/fie58773.2023.10342916
apa: 'Wehmeier, L., Eilermann, S., Niggemann, O., & Deuter, A. (2024). Task-fidelity
Assessment for Programming Tasks Using Semantic Code Analysis. In IEEE ASEE Frontiers
in Education Conference, Institute of Electrical and Electronics Engineers, &
American Society for Engineering Education (Eds.), FIE 2023 : College Station,
TX, USA, October 18-21, 2023 : conference proceedings / 2023 IEEE Frontiers in
Education Conference (FIE). IEEE. https://doi.org/10.1109/fie58773.2023.10342916'
bjps: 'Wehmeier L et al. (2024) Task-Fidelity Assessment for Programming
Tasks Using Semantic Code Analysis, IEEE ASEE Frontiers in Education Conference,
Institute of Electrical and Electronics Engineers, and American Society for Engineering
Education (eds). [Piscataway, NJ]: IEEE.'
chicago: 'Wehmeier, Leon, Sebastian Eilermann, Oliver Niggemann, and Andreas Deuter.
Task-Fidelity Assessment for Programming Tasks Using Semantic Code Analysis.
Edited by IEEE ASEE Frontiers in Education Conference, Institute of Electrical
and Electronics Engineers, and American Society for Engineering Education. FIE
2023 : College Station, TX, USA, October 18-21, 2023 : Conference Proceedings
/ 2023 IEEE Frontiers in Education Conference (FIE). [Piscataway, NJ]: IEEE,
2024. https://doi.org/10.1109/fie58773.2023.10342916.'
chicago-de: 'Wehmeier, Leon, Sebastian Eilermann, Oliver Niggemann und Andreas Deuter.
2024. Task-fidelity Assessment for Programming Tasks Using Semantic Code Analysis.
Hg. von IEEE ASEE Frontiers in Education Conference, Institute of Electrical and
Electronics Engineers, und American Society for Engineering Education. FIE
2023 : College Station, TX, USA, October 18-21, 2023 : conference proceedings
/ 2023 IEEE Frontiers in Education Conference (FIE). [Piscataway, NJ]: IEEE.
doi:10.1109/fie58773.2023.10342916,
.'
din1505-2-1: 'Wehmeier, Leon ; Eilermann, Sebastian ; Niggemann,
Oliver ; Deuter, Andreas
; IEEE ASEE Frontiers in Education Conference
; Institute of Electrical and Electronics
Engineers ; American Society for
Engineering Education (Hrsg.): Task-fidelity Assessment for Programming
Tasks Using Semantic Code Analysis. [Piscataway, NJ] : IEEE, 2024'
havard: L. Wehmeier, S. Eilermann, O. Niggemann, A. Deuter, Task-fidelity Assessment
for Programming Tasks Using Semantic Code Analysis, IEEE, [Piscataway, NJ], 2024.
ieee: 'L. Wehmeier, S. Eilermann, O. Niggemann, and A. Deuter, Task-fidelity
Assessment for Programming Tasks Using Semantic Code Analysis. [Piscataway,
NJ]: IEEE, 2024. doi: 10.1109/fie58773.2023.10342916.'
mla: 'Wehmeier, Leon, et al. “Task-Fidelity Assessment for Programming Tasks Using
Semantic Code Analysis.” FIE 2023 : College Station, TX, USA, October 18-21,
2023 : Conference Proceedings / 2023 IEEE Frontiers in Education Conference (FIE),
edited by IEEE ASEE Frontiers in Education Conference et al., IEEE, 2024, https://doi.org/10.1109/fie58773.2023.10342916.'
short: L. Wehmeier, S. Eilermann, O. Niggemann, A. Deuter, Task-Fidelity Assessment
for Programming Tasks Using Semantic Code Analysis, IEEE, [Piscataway, NJ], 2024.
ufg: 'Wehmeier, Leon u. a.: Task-fidelity Assessment for Programming Tasks
Using Semantic Code Analysis, hg. von IEEE ASEE Frontiers in Education Conference/Institute
of Electrical and Electronics Engineers, American Society for Engineering Education,
[Piscataway, NJ] 2024.'
van: 'Wehmeier L, Eilermann S, Niggemann O, Deuter A. Task-fidelity Assessment for
Programming Tasks Using Semantic Code Analysis. IEEE ASEE Frontiers in Education
Conference, Institute of Electrical and Electronics Engineers, American Society
for Engineering Education, editors. FIE 2023 : College Station, TX, USA, October
18-21, 2023 : conference proceedings / 2023 IEEE Frontiers in Education Conference
(FIE). [Piscataway, NJ]: IEEE; 2024.'
conference:
end_date: 2023-10-21
location: Texas
name: 2023 IEEE Frontiers in Education Conference (FIE)
start_date: 2023-10-18
corporate_editor:
- IEEE ASEE Frontiers in Education Conference
- Institute of Electrical and Electronics Engineers
- American Society for Engineering Education
date_created: 2025-06-18T13:05:11Z
date_updated: 2025-06-18T13:23:56Z
department:
- _id: DEP7022
- _id: DEP1306
- _id: DEP7001
doi: 10.1109/fie58773.2023.10342916
keyword:
- Codes
- Electronic learning
- Soft sensors
- Semantics
- Education
- Syntactics
- Task analysis
language:
- iso: eng
place: '[Piscataway, NJ]'
publication: 'FIE 2023 : College Station, TX, USA, October 18-21, 2023 : conference
proceedings / 2023 IEEE Frontiers in Education Conference (FIE)'
publication_identifier:
eisbn:
- 979-8-3503-3642-9
isbn:
- 979-8-3503-3643-6
publication_status: published
publisher: IEEE
status: public
title: Task-fidelity Assessment for Programming Tasks Using Semantic Code Analysis
type: conference_editor_article
user_id: '83781'
year: '2024'
...
---
_id: '10923'
abstract:
- lang: ger
text: Aufgrund der kontinuierlich voranschreitenden Fertigungsautomation als Bestandteil
der Digital Factory und des demografischen Wandels ist ein zunehmender Bedarf
an Personal mit IT Expertise in vielen verschiedenen industriellen Bereichen erkennbar.
In diesem Zusammenhang zeigen Künstliche Intelligenz (KI)-basierende Intelligent
Tutoring Systeme (ITS) großes Potenzial den aufgezeigten Schulungsbedarf teilweise
zu decken. Hierbei treffen besondere Anforderungen aus technischen, rechtlichen
und organisatorischen Bereichen aufeinander, die für Unternehmen sowohl Chancen
als auch Herausforderungen darstellen. Im Rahmen dieses Beitrags wird auf die
Potentiale eines Digital Twin als Ergebnis der Fertigungsautomation und Bestandteil
eines KI-basierenden ITS zur Unterstützung des Kompetenzerwerbs in der Aus- und
Weiterbildung für die Fertigungsautomation eingegangen. Ziel ist es, die Chancen
von individuell angepassten Aufgaben in einem ITS in Zusammenwirken mit einem
Digital Twin für Unternehmen und Mitarbeiter sowie die dabei auftretenden Herausforderungen
aufzuzeigen. Abschließend wird das Potenzial eines um einen Digital Twin erweitertes
ITS anhand eines von uns entwickelten ITS in einer Fallstudie aufgezeigt.
author:
- first_name: Andreas
full_name: Deuter, Andreas
id: '62088'
last_name: Deuter
orcid: 0000-0002-6529-6215
- first_name: Leon
full_name: Wehmeier, Leon
id: '81257'
last_name: Wehmeier
- first_name: Asmar
full_name: Ali, Asmar
id: '78685'
last_name: Ali
- first_name: Roland
full_name: Bach, Roland
last_name: Bach
- first_name: Christoph
full_name: Schultz, Christoph
last_name: Schultz
- first_name: Sebastian
full_name: Eilermann, Sebastian
last_name: Eilermann
- first_name: Oliver
full_name: Niggemann, Oliver
last_name: Niggemann
citation:
ama: Deuter A, Wehmeier L, Ali A, et al. Die steigende Bedeutung des Digital
Twins als Bestandteil eines Intelligent Tutoring Systems in der Automatisierung.
VDI Verlag; 2023:37-54. doi:10.51202/9783181024195-37
apa: Deuter, A., Wehmeier, L., Ali, A., Bach, R., Schultz, C., Eilermann, S., &
Niggemann, O. (2023). Die steigende Bedeutung des Digital Twins als Bestandteil
eines Intelligent Tutoring Systems in der Automatisierung. In VDI-Berichte
Nr. 2419 (pp. 37–54). VDI Verlag. https://doi.org/10.51202/9783181024195-37
bjps: 'Deuter A et al. (2023) Die steigende Bedeutung des Digital
Twins als Bestandteil eines Intelligent Tutoring Systems in der Automatisierung.
Düsseldorf: VDI Verlag.'
chicago: 'Deuter, Andreas, Leon Wehmeier, Asmar Ali, Roland Bach, Christoph Schultz,
Sebastian Eilermann, and Oliver Niggemann. Die steigende Bedeutung des Digital
Twins als Bestandteil eines Intelligent Tutoring Systems in der Automatisierung.
VDI-Berichte Nr. 2419. Düsseldorf: VDI Verlag, 2023. https://doi.org/10.51202/9783181024195-37.'
chicago-de: 'Deuter, Andreas, Leon Wehmeier, Asmar Ali, Roland Bach, Christoph Schultz,
Sebastian Eilermann und Oliver Niggemann. 2023. Die steigende Bedeutung des
Digital Twins als Bestandteil eines Intelligent Tutoring Systems in der Automatisierung.
VDI-Berichte Nr. 2419. Düsseldorf: VDI Verlag. doi:10.51202/9783181024195-37,
.'
din1505-2-1: 'Deuter, Andreas ; Wehmeier, Leon ; Ali,
Asmar ; Bach, Roland ; Schultz, Christoph ; Eilermann,
Sebastian ; Niggemann, Oliver:
Die steigende Bedeutung des Digital Twins als Bestandteil eines Intelligent
Tutoring Systems in der Automatisierung. Düsseldorf : VDI Verlag, 2023'
havard: A. Deuter, L. Wehmeier, A. Ali, R. Bach, C. Schultz, S. Eilermann, O. Niggemann,
Die steigende Bedeutung des Digital Twins als Bestandteil eines Intelligent Tutoring
Systems in der Automatisierung, VDI Verlag, Düsseldorf, 2023.
ieee: 'A. Deuter et al., Die steigende Bedeutung des Digital Twins als
Bestandteil eines Intelligent Tutoring Systems in der Automatisierung. Düsseldorf:
VDI Verlag, 2023, pp. 37–54. doi: 10.51202/9783181024195-37.'
mla: Deuter, Andreas, et al. “Die steigende Bedeutung des Digital Twins als Bestandteil
eines Intelligent Tutoring Systems in der Automatisierung.” VDI-Berichte Nr.
2419, VDI Verlag, 2023, pp. 37–54, https://doi.org/10.51202/9783181024195-37.
short: A. Deuter, L. Wehmeier, A. Ali, R. Bach, C. Schultz, S. Eilermann, O. Niggemann,
Die steigende Bedeutung des Digital Twins als Bestandteil eines Intelligent Tutoring
Systems in der Automatisierung, VDI Verlag, Düsseldorf, 2023.
ufg: 'Deuter, Andreas u. a.: Die steigende Bedeutung des Digital Twins als
Bestandteil eines Intelligent Tutoring Systems in der Automatisierung, Düsseldorf
2023.'
van: 'Deuter A, Wehmeier L, Ali A, Bach R, Schultz C, Eilermann S, et al. Die steigende
Bedeutung des Digital Twins als Bestandteil eines Intelligent Tutoring Systems
in der Automatisierung. VDI-Berichte Nr. 2419. Düsseldorf: VDI Verlag; 2023.'
conference:
location: Baden-Baden
name: Automation 2023
date_created: 2024-01-09T11:00:59Z
date_updated: 2024-01-24T10:03:46Z
department:
- _id: DEP7022
- _id: DEP1306
- _id: DEP7001
doi: 10.51202/9783181024195-37
language:
- iso: ger
main_file_link:
- open_access: '1'
oa: '1'
page: 37-54
place: Düsseldorf
publication: VDI-Berichte Nr. 2419
publication_identifier:
eissn:
- '978-3-18-102419-5 '
isbn:
- '978-3-18-092419-9 '
publication_status: published
publisher: VDI Verlag
quality_controlled: '1'
status: public
title: Die steigende Bedeutung des Digital Twins als Bestandteil eines Intelligent
Tutoring Systems in der Automatisierung
type: conference_editor_article
user_id: '83780'
year: '2023'
...
---
_id: '10935'
abstract:
- lang: eng
text: One of the challenges in universities is to take into account the different
competences of students throughout the process of imparting knowledge. It is unlikely
that all students will grasp the course content in the same way, as they have
different abilities. Similarly, it is unrealistic for teachers to address all
the individual needs of each student at all times. In addition, maintaining learners'
attention to a particular topic is also an essential part of teaching. To overcome
these challenges, we are developing AI learning software as part of a research
project. The software generates learning scenarios for the students and takes
their individual competences into account. The research project focuses on the
field of automation technology, especially on programming, as programming skills
are usually required in automation environments. When solving the scenarios, students
receive immediate feedback on how well they have solved the task. Immediate automated
feedback not only meets the students' expectations of quick learning feedback,
but it also relieves the teaching staff in the assessment process. In addition,
the software includes an interactive user interface that allows learners to see
the results of their programming tasks in a simulated 3D environment. This approach
aims to maintain learners' attention over a longer learning period. This paper
describes the above aspects that are being developed in the research project and
previews the new learning opportunities that could arise from the use of AI.
author:
- first_name: Asmar
full_name: Ali, Asmar
id: '78685'
last_name: Ali
- first_name: Andreas
full_name: Deuter, Andreas
id: '62088'
last_name: Deuter
orcid: 0000-0002-6529-6215
citation:
ama: 'Ali A, Deuter A. An AI Assistant for Education in Automation. Journal of
international scientific publications / Science & Education Foundation : Educational
Alternatives . 2023;21:12-20. doi:10.62991/EA1996108906'
apa: 'Ali, A., & Deuter, A. (2023). An AI Assistant for Education in Automation.
Journal of International Scientific Publications / Science & Education
Foundation : Educational Alternatives , 21, 12–20. https://doi.org/10.62991/EA1996108906'
bjps: 'Ali A and Deuter A (2023) An AI Assistant for Education in Automation.
Journal of international scientific publications / Science & Education
Foundation : Educational Alternatives 21, 12–20.'
chicago: 'Ali, Asmar, and Andreas Deuter. “An AI Assistant for Education in Automation.”
Journal of International Scientific Publications / Science & Education
Foundation : Educational Alternatives 21 (2023): 12–20. https://doi.org/10.62991/EA1996108906.'
chicago-de: 'Ali, Asmar und Andreas Deuter. 2023. An AI Assistant for Education
in Automation. Journal of international scientific publications / Science &
Education Foundation : Educational Alternatives 21: 12–20. doi:10.62991/EA1996108906,
.'
din1505-2-1: 'Ali, Asmar ; Deuter,
Andreas: An AI Assistant for Education in Automation. In: Journal of
international scientific publications / Science & Education Foundation : Educational
Alternatives Bd. 21. [Erscheinungsort nicht ermittelbar], Info Invest (2023),
S. 12–20'
havard: 'A. Ali, A. Deuter, An AI Assistant for Education in Automation, Journal
of International Scientific Publications / Science & Education Foundation :
Educational Alternatives . 21 (2023) 12–20.'
ieee: 'A. Ali and A. Deuter, “An AI Assistant for Education in Automation,” Journal
of international scientific publications / Science & Education Foundation :
Educational Alternatives , vol. 21, pp. 12–20, 2023, doi: 10.62991/EA1996108906.'
mla: 'Ali, Asmar, and Andreas Deuter. “An AI Assistant for Education in Automation.”
Journal of International Scientific Publications / Science & Education
Foundation : Educational Alternatives , vol. 21, 2023, pp. 12–20, https://doi.org/10.62991/EA1996108906.'
short: 'A. Ali, A. Deuter, Journal of International Scientific Publications / Science
& Education Foundation : Educational Alternatives 21 (2023) 12–20.'
ufg: 'Ali, Asmar/Deuter, Andreas: An AI Assistant for Education in Automation,
in: Journal of international scientific publications / Science & Education
Foundation : Educational Alternatives 21 (2023), S. 12–20.'
van: 'Ali A, Deuter A. An AI Assistant for Education in Automation. Journal of international
scientific publications / Science & Education Foundation : Educational Alternatives
. 2023;21:12–20.'
conference:
end_date: 2023-08-26
location: Burgas
name: 14th International Conference Education, Research & Development
start_date: 2023-08-24
date_created: 2024-01-09T13:25:08Z
date_updated: 2025-06-12T14:01:23Z
department:
- _id: DEP7022
- _id: DEP1306
- _id: DEP7001
doi: 10.62991/EA1996108906
intvolume: ' 21'
keyword:
- ai education
- automated feedback
- automation education
- educational software
- programming
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.scientific-publications.net/en/article/1002566/
oa: '1'
page: 12-20
place: '[Erscheinungsort nicht ermittelbar]'
publication: 'Journal of international scientific publications / Science & Education
Foundation : Educational Alternatives '
publication_identifier:
issn:
- 1313-2571
publication_status: published
publisher: 'Info Invest '
status: public
title: An AI Assistant for Education in Automation
type: industry_journal_article
user_id: '83781'
volume: 21
year: '2023'
...
---
_id: '10962'
abstract:
- lang: eng
text: The increasing number of product artifacts (e.g., mechanical or electronic
components, software functions, documents) confronts small and medium-sized companies
with the challenge of assessing change effects. The lack of knowledge of artifact
relationships causes problems, such as outdated documentation, lack of coordination
with affected disciplines, or delayed changes. The Design Structure Matrix (DSM)
can clearly represent the elements and relationships of complex systems. This
paper presents an assistance system for intuitive visualization of engineering
change effects using existing DSM-based methods for complexity management. The
implemented algorithms compute graph layouts, cluster analyses, and change predictions
in the form of change risk, time, and cost. An application example of a 3D-printed
intelligent lamp demonstrates the approach's viability. The paper concludes with
a discussion of the benefits and future activities.
author:
- first_name: Jan-Phillip
full_name: Herrmann, Jan-Phillip
id: '75846'
last_name: Herrmann
- first_name: Sven
full_name: Tackenberg, Sven
id: '71470'
last_name: Tackenberg
- first_name: Christoph
full_name: Trojanowski, Christoph
last_name: Trojanowski
- first_name: Carolin
full_name: Pankrath, Carolin
last_name: Pankrath
- first_name: Sebastian
full_name: Imort, Sebastian
id: '74291'
last_name: Imort
- first_name: Andreas
full_name: Deuter, Andreas
id: '62088'
last_name: Deuter
orcid: 0000-0002-6529-6215
citation:
ama: Herrmann JP, Tackenberg S, Trojanowski C, Pankrath C, Imort S, Deuter A. Assistance
System for Graph-Based 3D Visualization of Design Structure Matrices. (Stowe
H, Browning TR, Eppinger SD, et al., eds.). The Design Society; 2023:58-67. doi:10.35199/dsm2023.07
apa: 'Herrmann, J.-P., Tackenberg, S., Trojanowski, C., Pankrath, C., Imort, S.,
& Deuter, A. (2023). Assistance System for graph-based 3D Visualization of
Design Structure Matrices. In H. Stowe, T. R. Browning, S. D. Eppinger, J. Trauer,
C. Langner, M. Kreimeyer, O. Isaksson, M. Panarotto, & A. Brahma (Eds.), DS
126: Proceedings of the 25th International DSM Conference (DSM 2023) (pp.
58–67). The Design Society. https://doi.org/10.35199/dsm2023.07'
bjps: Herrmann J-P et al. (2023) Assistance System for Graph-Based
3D Visualization of Design Structure Matrices, Stowe H et al. (eds). The Design
Society.
chicago: 'Herrmann, Jan-Phillip, Sven Tackenberg, Christoph Trojanowski, Carolin
Pankrath, Sebastian Imort, and Andreas Deuter. Assistance System for Graph-Based
3D Visualization of Design Structure Matrices. Edited by Harold Stowe, Tyson
R. Browning, Steven D. Eppinger, Jakob Trauer, Christopher Langner, Matthias Kreimeyer,
Ola Isaksson, Massimo Panarotto, and Arindam Brahma. DS 126: Proceedings of
the 25th International DSM Conference (DSM 2023). The Design Society, 2023.
https://doi.org/10.35199/dsm2023.07.'
chicago-de: 'Herrmann, Jan-Phillip, Sven Tackenberg, Christoph Trojanowski, Carolin
Pankrath, Sebastian Imort und Andreas Deuter. 2023. Assistance System for graph-based
3D Visualization of Design Structure Matrices. Hg. von Harold Stowe, Tyson
R. Browning, Steven D. Eppinger, Jakob Trauer, Christopher Langner, Matthias Kreimeyer,
Ola Isaksson, Massimo Panarotto, und Arindam Brahma. DS 126: Proceedings of
the 25th International DSM Conference (DSM 2023). The Design Society. doi:10.35199/dsm2023.07, .'
din1505-2-1: 'Herrmann, Jan-Phillip
; Tackenberg, Sven ; Trojanowski,
Christoph ; Pankrath, Carolin
; Imort, Sebastian ; Deuter,
Andreas ; Stowe,
H. ; Browning, T. R. ; Eppinger, S. D. ; Trauer,
J. ; Langner, C. ; Kreimeyer, M. ; Isaksson,
O. ; Panarotto, M. ; u. a.
(Hrsg.): Assistance System for graph-based 3D Visualization of Design Structure
Matrices : The Design Society, 2023'
havard: J.-P. Herrmann, S. Tackenberg, C. Trojanowski, C. Pankrath, S. Imort, A.
Deuter, Assistance System for graph-based 3D Visualization of Design Structure
Matrices, The Design Society, 2023.
ieee: 'J.-P. Herrmann, S. Tackenberg, C. Trojanowski, C. Pankrath, S. Imort, and
A. Deuter, Assistance System for graph-based 3D Visualization of Design Structure
Matrices. The Design Society, 2023, pp. 58–67. doi: 10.35199/dsm2023.07.'
mla: 'Herrmann, Jan-Phillip, et al. “Assistance System for Graph-Based 3D Visualization
of Design Structure Matrices.” DS 126: Proceedings of the 25th International
DSM Conference (DSM 2023), edited by Harold Stowe et al., The Design Society,
2023, pp. 58–67, https://doi.org/10.35199/dsm2023.07.'
short: J.-P. Herrmann, S. Tackenberg, C. Trojanowski, C. Pankrath, S. Imort, A.
Deuter, Assistance System for Graph-Based 3D Visualization of Design Structure
Matrices, The Design Society, 2023.
ufg: 'Herrmann, Jan-Phillip u. a.: Assistance System for graph-based 3D Visualization
of Design Structure Matrices, hg. von Stowe, Harold u. a., o. O. 2023.'
van: 'Herrmann JP, Tackenberg S, Trojanowski C, Pankrath C, Imort S, Deuter A. Assistance
System for graph-based 3D Visualization of Design Structure Matrices. Stowe H,
Browning TR, Eppinger SD, Trauer J, Langner C, Kreimeyer M, et al., editors. DS
126: Proceedings of the 25th International DSM Conference (DSM 2023). The Design
Society; 2023.'
conference:
end_date: 2023-10-05
location: Gothenburg, Sweden
name: 25th International Dependency and Structure Modeling Conference (DSM)
start_date: 2023-10-03
date_created: 2024-01-24T10:17:16Z
date_updated: 2025-06-26T07:55:50Z
department:
- _id: DEP7022
- _id: DEP1306
- _id: DEP7001
doi: 10.35199/dsm2023.07
editor:
- first_name: Harold
full_name: Stowe, Harold
last_name: Stowe
- first_name: Tyson R.
full_name: Browning, Tyson R.
last_name: Browning
- first_name: Steven D.
full_name: Eppinger, Steven D.
last_name: Eppinger
- first_name: Jakob
full_name: Trauer, Jakob
last_name: Trauer
- first_name: Christopher
full_name: Langner, Christopher
last_name: Langner
- first_name: Matthias
full_name: Kreimeyer, Matthias
last_name: Kreimeyer
- first_name: Ola
full_name: Isaksson, Ola
last_name: Isaksson
- first_name: Massimo
full_name: Panarotto, Massimo
last_name: Panarotto
- first_name: Arindam
full_name: Brahma, Arindam
last_name: Brahma
keyword:
- Graph-based Visualization
- Assistance System
- Engineering Change Management
- Complexity Management
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.designsociety.org/download-publication/46879/Assistance+System+for+graph-based+3D+Visualization+of+Design+Structure+Matrices
oa: '1'
page: 58-67
publication: 'DS 126: Proceedings of the 25th International DSM Conference (DSM 2023)'
publication_status: published
publisher: The Design Society
status: public
title: Assistance System for graph-based 3D Visualization of Design Structure Matrices
type: conference_editor_article
user_id: '83781'
year: '2023'
...
---
_id: '13010'
abstract:
- lang: eng
text: Especially in highly interdisciplinary fields such as automation engineering,
contemporary programming education with tailored assignments and individual feedback
is a major challenge for educational institutions due to the increasing number
of students per teacher and the ever-increasing demand for computer science professionals.
To address this gap, we present ”KIAAA” an AI Assistant for Automation Engineering
Teaching, a work-in-progress approach for an integrated, customized, and AI-based
learning support system for automation and programming courses based on instructor-defined
course objectives. Thereby in the KIAAA system, the individual knowledge level
of the students is determined and individually tailored virtual learning scenarios
are generated based on the knowledge and learning profile of the students. These
are iteratively adapted based on the answers given. To achieve this, KIAAA uses
several AI components, a hybrid rule-based scenario generation component, a Help-DKT-based
cognitive model, and a solution assessor that uses a combination of traditional
code analysis methods and AI-based analyses methods for automated programming
task assessment. These components are the main parts of KIAAA to generate customized
programming scenarios as well as visualization and simulation based on a modern
game and physics engine.
author:
- first_name: Sebastian
full_name: Eilermann, Sebastian
last_name: Eilermann
- first_name: Leon
full_name: Wehmeier, Leon
id: '81257'
last_name: Wehmeier
- first_name: Oliver
full_name: Niggemann, Oliver
last_name: Niggemann
- first_name: Andreas
full_name: Deuter, Andreas
id: '62088'
last_name: Deuter
orcid: 0000-0002-6529-6215
citation:
ama: 'Eilermann S, Wehmeier L, Niggemann O, Deuter A. KIAAA: An AI Assistant
for Teaching Programming in the Field of Automation. (Jasperneite J, IEEE
International Conference on Industrial Informatics , Institute of Electrical and
Electronics Engineers, eds.). IEEE; 2023. doi:10.1109/indin51400.2023.10218157'
apa: 'Eilermann, S., Wehmeier, L., Niggemann, O., & Deuter, A. (2023). KIAAA:
An AI Assistant for Teaching Programming in the Field of Automation. In J. Jasperneite,
IEEE International Conference on Industrial Informatics , & Institute of Electrical
and Electronics Engineers (Eds.), 2023 IEEE 21st International Conference on
Industrial Informatics (INDIN). IEEE. https://doi.org/10.1109/indin51400.2023.10218157'
bjps: 'Eilermann S et al. (2023) KIAAA: An AI Assistant for Teaching
Programming in the Field of Automation, Jasperneite J, IEEE International
Conference on Industrial Informatics , and Institute of Electrical and Electronics
Engineers (eds). [Piscataway, NJ]: IEEE.'
chicago: 'Eilermann, Sebastian, Leon Wehmeier, Oliver Niggemann, and Andreas Deuter.
KIAAA: An AI Assistant for Teaching Programming in the Field of Automation.
Edited by Jürgen Jasperneite, IEEE International Conference on Industrial Informatics
, and Institute of Electrical and Electronics Engineers. 2023 IEEE 21st International
Conference on Industrial Informatics (INDIN). [Piscataway, NJ]: IEEE, 2023.
https://doi.org/10.1109/indin51400.2023.10218157.'
chicago-de: 'Eilermann, Sebastian, Leon Wehmeier, Oliver Niggemann und Andreas Deuter.
2023. KIAAA: An AI Assistant for Teaching Programming in the Field of Automation.
Hg. von Jürgen Jasperneite, IEEE International Conference on Industrial Informatics
, und Institute of Electrical and Electronics Engineers. 2023 IEEE 21st International
Conference on Industrial Informatics (INDIN). [Piscataway, NJ]: IEEE. doi:10.1109/indin51400.2023.10218157,
.'
din1505-2-1: 'Eilermann, Sebastian
; Wehmeier, Leon ; Niggemann,
Oliver ; Deuter, Andreas
; Jasperneite, J. ; IEEE
International Conference on Industrial Informatics ; Institute
of Electrical and Electronics Engineers (Hrsg.): KIAAA: An AI Assistant
for Teaching Programming in the Field of Automation. [Piscataway, NJ] : IEEE,
2023'
havard: 'S. Eilermann, L. Wehmeier, O. Niggemann, A. Deuter, KIAAA: An AI Assistant
for Teaching Programming in the Field of Automation, IEEE, [Piscataway, NJ], 2023.'
ieee: 'S. Eilermann, L. Wehmeier, O. Niggemann, and A. Deuter, KIAAA: An AI Assistant
for Teaching Programming in the Field of Automation. [Piscataway, NJ]: IEEE,
2023. doi: 10.1109/indin51400.2023.10218157.'
mla: 'Eilermann, Sebastian, et al. “KIAAA: An AI Assistant for Teaching Programming
in the Field of Automation.” 2023 IEEE 21st International Conference on Industrial
Informatics (INDIN), edited by Jürgen Jasperneite et al., IEEE, 2023, https://doi.org/10.1109/indin51400.2023.10218157.'
short: 'S. Eilermann, L. Wehmeier, O. Niggemann, A. Deuter, KIAAA: An AI Assistant
for Teaching Programming in the Field of Automation, IEEE, [Piscataway, NJ], 2023.'
ufg: 'Eilermann, Sebastian u. a.: KIAAA: An AI Assistant for Teaching Programming
in the Field of Automation, hg. von Jasperneite, Jürgen/IEEE International Conference
on Industrial Informatics , Institute of Electrical and Electronics Engineers,
[Piscataway, NJ] 2023.'
van: 'Eilermann S, Wehmeier L, Niggemann O, Deuter A. KIAAA: An AI Assistant for
Teaching Programming in the Field of Automation. Jasperneite J, IEEE International
Conference on Industrial Informatics , Institute of Electrical and Electronics
Engineers, editors. 2023 IEEE 21st International Conference on Industrial Informatics
(INDIN). [Piscataway, NJ]: IEEE; 2023.'
conference:
end_date: 2023-07-20
location: Lemgo
name: 21st International Conference on Industrial Informatics (INDIN)
start_date: 2023-07-18
corporate_editor:
- 'IEEE International Conference on Industrial Informatics '
- Institute of Electrical and Electronics Engineers
date_created: 2025-06-24T09:24:47Z
date_updated: 2025-06-24T09:38:24Z
department:
- _id: DEP7022
- _id: DEP1306
- _id: DEP7001
doi: 10.1109/indin51400.2023.10218157
editor:
- first_name: Jürgen
full_name: Jasperneite, Jürgen
id: '1899'
last_name: Jasperneite
keyword:
- Visualization
- Automation
- Education
- Games
- Hybrid power systems
- Task analysis
- Artificial intelligence
language:
- iso: eng
place: '[Piscataway, NJ]'
publication: 2023 IEEE 21st International Conference on Industrial Informatics (INDIN)
publication_identifier:
eisbn:
- 978-1-6654-9313-0
isbn:
- 978-1-6654-9314-7
publication_status: published
publisher: IEEE
quality_controlled: '1'
status: public
title: 'KIAAA: An AI Assistant for Teaching Programming in the Field of Automation'
type: conference_editor_article
user_id: '83781'
year: '2023'
...
---
_id: '9133'
abstract:
- lang: eng
text: 'Mit der steigenden Komplexität der Entwicklung mechatronischer Produkte sind
den beteiligten Akteuren die Wirkbeziehungen zwischen den Bauteilen sowie zwischen
den Bauteilen und den erforderlichen Produktionsprozessen oft nicht mehr hinreichend
bekannt. Nicht abgestimmte Entscheidungen und Handlungen sind die Folge, die zu
Kosten- und Terminüberschreitungen führen. Dieser Beitrag zeigt mögliche Innovationspotenziale
auf, die ein Assistenzsystem für das Komplexitätsmanagement bieten kann. '
article_type: original
author:
- first_name: Andreas
full_name: Deuter, Andreas
id: '62088'
last_name: Deuter
orcid: 0000-0002-6529-6215
- first_name: Sven
full_name: Tackenberg, Sven
id: '71470'
last_name: Tackenberg
- first_name: Jan-Phillip
full_name: Herrmann, Jan-Phillip
id: '75846'
last_name: Herrmann
- first_name: Marc
full_name: Vathauer, Marc
last_name: Vathauer
- first_name: Franz
full_name: Kage, Franz
last_name: Kage
citation:
ama: Deuter A, Tackenberg S, Herrmann JP, Vathauer M, Kage F. Innovationspotenziale
im Komplexitätsmanagement- Assistenzsystem für kleine und mittlere Unternehmen.
WT WerkstattsTechnik online. 2022;112(6):404-407.
apa: Deuter, A., Tackenberg, S., Herrmann, J.-P., Vathauer, M., & Kage, F. (2022).
Innovationspotenziale im Komplexitätsmanagement- Assistenzsystem für kleine und
mittlere Unternehmen. WT WerkstattsTechnik Online, 112(6), 404–407.
bjps: Deuter A et al. (2022) Innovationspotenziale Im Komplexitätsmanagement-
Assistenzsystem Für Kleine Und Mittlere Unternehmen. WT WerkstattsTechnik online
112, 404–407.
chicago: 'Deuter, Andreas, Sven Tackenberg, Jan-Phillip Herrmann, Marc Vathauer,
and Franz Kage. “Innovationspotenziale Im Komplexitätsmanagement- Assistenzsystem
Für Kleine Und Mittlere Unternehmen.” WT WerkstattsTechnik Online 112,
no. 6 (2022): 404–7.'
chicago-de: 'Deuter, Andreas, Sven Tackenberg, Jan-Phillip Herrmann, Marc Vathauer
und Franz Kage. 2022. Innovationspotenziale im Komplexitätsmanagement- Assistenzsystem
für kleine und mittlere Unternehmen. WT WerkstattsTechnik online 112, Nr.
6: 404–407.'
din1505-2-1: 'Deuter, Andreas ; Tackenberg, Sven ; Herrmann,
Jan-Phillip ; Vathauer, Marc
; Kage, Franz: Innovationspotenziale
im Komplexitätsmanagement- Assistenzsystem für kleine und mittlere Unternehmen.
In: WT WerkstattsTechnik online Bd. 112. Düsseldorf, VDI Fachmedien (2022),
Nr. 6, S. 404–407'
havard: A. Deuter, S. Tackenberg, J.-P. Herrmann, M. Vathauer, F. Kage, Innovationspotenziale
im Komplexitätsmanagement- Assistenzsystem für kleine und mittlere Unternehmen,
WT WerkstattsTechnik Online. 112 (2022) 404–407.
ieee: A. Deuter, S. Tackenberg, J.-P. Herrmann, M. Vathauer, and F. Kage, “Innovationspotenziale
im Komplexitätsmanagement- Assistenzsystem für kleine und mittlere Unternehmen,”
WT WerkstattsTechnik online, vol. 112, no. 6, pp. 404–407, 2022.
mla: Deuter, Andreas, et al. “Innovationspotenziale Im Komplexitätsmanagement- Assistenzsystem
Für Kleine Und Mittlere Unternehmen.” WT WerkstattsTechnik Online, vol.
112, no. 6, 2022, pp. 404–07.
short: A. Deuter, S. Tackenberg, J.-P. Herrmann, M. Vathauer, F. Kage, WT WerkstattsTechnik
Online 112 (2022) 404–407.
ufg: 'Deuter, Andreas u. a.: Innovationspotenziale im Komplexitätsmanagement-
Assistenzsystem für kleine und mittlere Unternehmen, in: WT WerkstattsTechnik
online 112 (2022), H. 6, S. 404–407.'
van: Deuter A, Tackenberg S, Herrmann JP, Vathauer M, Kage F. Innovationspotenziale
im Komplexitätsmanagement- Assistenzsystem für kleine und mittlere Unternehmen.
WT WerkstattsTechnik online. 2022;112(6):404–7.
date_created: 2022-10-20T11:04:27Z
date_updated: 2024-08-05T06:51:35Z
department:
- _id: DEP7022
- _id: DEP7020
- _id: DEP1306
intvolume: ' 112'
issue: '6'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.ingenieur.de/fachmedien/wt-werkstattstechnik/bmbf-produktionsforschung-wt-werkstattstechnik/innovationspotenziale-im-komplexitaetsmanagement/
oa: '1'
page: 404-407
place: Düsseldorf
publication: WT WerkstattsTechnik online
publication_identifier:
eissn:
- '1436-4980 '
issn:
- 1436-5006
publication_status: published
publisher: VDI Fachmedien
status: public
title: Innovationspotenziale im Komplexitätsmanagement- Assistenzsystem für kleine
und mittlere Unternehmen
type: industry_journal_article
user_id: '83781'
volume: 112
year: '2022'
...
---
_id: '7035'
abstract:
- lang: eng
text: Technological progress, upcoming cyber-physical systems, and limited resources
confront small and medium-sized enterprises (SMEs) with the challenge of complexity
management in product development projects spanning over the entire product lifecycle.
SMEs require a solution for documenting and analyzing the functional relationships
between multiple domains such as products, software, and processes. The German
research project FuPEP “Funktionsorientiertes Komplexitätsmanagement in allen
Phasen der Produktentstehung” aims to address this issue by developing an assistance
system that supports product developers by visualizing functional relationships.
This paper presents the methodology and results of the assistance system’s requirements
elicitation with two SMEs. Conducting the elicitation during a global pandemic,
we discuss its application using specific techniques in light of COVID-19. We
model problems and their effects regarding complexity management in product development
in a system dynamics model. The most important requirements and use cases elicited
are presented, and the requirements elicitation methodology and results are discussed.
Additionally, we present a multilayer software architecture design of the assistance
system. Our case study suggests a relationship between fear of a missing project
focus among project participants and the restriction of requirements elicitation
techniques to those possible via web conferencing tools.
article_number: '149'
author:
- first_name: Jan-Phillip
full_name: Herrmann, Jan-Phillip
id: '75846'
last_name: Herrmann
- first_name: Sebastian
full_name: Imort, Sebastian
id: '74291'
last_name: Imort
- first_name: Christoph
full_name: Trojanowski, Christoph
last_name: Trojanowski
- first_name: Andreas
full_name: Deuter, Andreas
id: '62088'
last_name: Deuter
orcid: 0000-0002-6529-6215
citation:
ama: 'Herrmann JP, Imort S, Trojanowski C, Deuter A. Requirements Elicitation for
an Assistance System for Complexity Management in Product Development of SMEs
during COVID-19: A Case Study. Computers. 2021;10(11). doi:10.3390/computers10110149'
apa: 'Herrmann, J.-P., Imort, S., Trojanowski, C., & Deuter, A. (2021). Requirements
Elicitation for an Assistance System for Complexity Management in Product Development
of SMEs during COVID-19: A Case Study. Computers, 10(11), Article
149. https://doi.org/10.3390/computers10110149'
bjps: 'Herrmann J-P et al. (2021) Requirements Elicitation for an
Assistance System for Complexity Management in Product Development of SMEs during
COVID-19: A Case Study. Computers 10.'
chicago: 'Herrmann, Jan-Phillip, Sebastian Imort, Christoph Trojanowski, and Andreas
Deuter. “Requirements Elicitation for an Assistance System for Complexity Management
in Product Development of SMEs during COVID-19: A Case Study.” Computers
10, no. 11 (2021). https://doi.org/10.3390/computers10110149.'
chicago-de: 'Herrmann, Jan-Phillip, Sebastian Imort, Christoph Trojanowski und Andreas
Deuter. 2021. Requirements Elicitation for an Assistance System for Complexity
Management in Product Development of SMEs during COVID-19: A Case Study. Computers
10, Nr. 11. doi:10.3390/computers10110149,
.'
din1505-2-1: 'Herrmann, Jan-Phillip
; Imort, Sebastian ; Trojanowski,
Christoph ; Deuter, Andreas:
Requirements Elicitation for an Assistance System for Complexity Management in
Product Development of SMEs during COVID-19: A Case Study. In: Computers
Bd. 10 (2021), Nr. 11'
havard: 'J.-P. Herrmann, S. Imort, C. Trojanowski, A. Deuter, Requirements Elicitation
for an Assistance System for Complexity Management in Product Development of SMEs
during COVID-19: A Case Study, Computers. 10 (2021).'
ieee: 'J.-P. Herrmann, S. Imort, C. Trojanowski, and A. Deuter, “Requirements Elicitation
for an Assistance System for Complexity Management in Product Development of SMEs
during COVID-19: A Case Study,” Computers, vol. 10, no. 11, Art. no. 149,
2021, doi: 10.3390/computers10110149.'
mla: 'Herrmann, Jan-Phillip, et al. “Requirements Elicitation for an Assistance
System for Complexity Management in Product Development of SMEs during COVID-19:
A Case Study.” Computers, vol. 10, no. 11, 149, 2021, https://doi.org/10.3390/computers10110149.'
short: J.-P. Herrmann, S. Imort, C. Trojanowski, A. Deuter, Computers 10 (2021).
ufg: 'Herrmann, Jan-Phillip u. a.: Requirements Elicitation for an Assistance
System for Complexity Management in Product Development of SMEs during COVID-19:
A Case Study, in: Computers 10 (2021), H. 11.'
van: 'Herrmann JP, Imort S, Trojanowski C, Deuter A. Requirements Elicitation for
an Assistance System for Complexity Management in Product Development of SMEs
during COVID-19: A Case Study. Computers. 2021;10(11).'
date_created: 2022-02-08T14:48:19Z
date_updated: 2025-06-26T13:37:00Z
department:
- _id: DEP7020
- _id: DEP7022
- _id: DEP1306
doi: 10.3390/computers10110149
external_id:
isi:
- '000727073200001'
intvolume: ' 10'
isi: '1'
issue: '11'
keyword:
- complexity management
- assistance system
- product development
- systems engineering
- design structure matrix
- asset administration shell
language:
- iso: eng
publication: Computers
publication_identifier:
eissn:
- 2073-431X
publication_status: published
status: public
title: 'Requirements Elicitation for an Assistance System for Complexity Management
in Product Development of SMEs during COVID-19: A Case Study'
type: journal_article
user_id: '83781'
volume: 10
year: '2021'
...
---
_id: '7781'
abstract:
- lang: eng
text: Product lifecycle management (PLM) as a holistic process encompasses
the idea generation for a product, its conception, and its production, as well
as its operating phase. Numerous tools and data models are used throughout this
process. In recent years, industry and academia have developed integration concepts
to realize efficient PLM across all domains and phases. However, the solutions
available in practice need specific interfaces and tend to be vendor dependent.
The Asset Administration Shell (AAS) aims to be a standardized digital representation
of an asset (e.g., a product). In accordance with its objective, it has the potential
to integrate all data generated during the PLM process into one data model and
to provide a universally valid interface for all PLM phases. However, to date,
there is no holistic concept that demonstrates this potential. The goal of this
research work is to develop and validate such an AAS-based concept. This article
demonstrates the application of the AAS in an order-controlled production process,
including the semi-automatic generation of PLM-related AAS data. Furthermore,
it discusses the potential of the AAS as a standard interface providing a smooth
data integration throughout the PLM process.
article_number: '84'
author:
- first_name: Andreas
full_name: Deuter, Andreas
id: '62088'
last_name: Deuter
orcid: 0000-0002-6529-6215
- first_name: Sebastian
full_name: Imort, Sebastian
id: '74291'
last_name: Imort
citation:
ama: 'Deuter A, Imort S. Product Lifecycle Management with the Asset Administration
Shell. Computers : open access journal . 2021;10(7). doi:10.3390/computers10070084'
apa: 'Deuter, A., & Imort, S. (2021). Product Lifecycle Management with the
Asset Administration Shell. Computers : Open Access Journal , 10(7),
Article 84. https://doi.org/10.3390/computers10070084'
bjps: 'Deuter A and Imort S (2021) Product Lifecycle Management with the
Asset Administration Shell. Computers : open access journal 10.'
chicago: 'Deuter, Andreas, and Sebastian Imort. “Product Lifecycle Management with
the Asset Administration Shell.” Computers : Open Access Journal 10, no.
7 (2021). https://doi.org/10.3390/computers10070084.'
chicago-de: 'Deuter, Andreas und Sebastian Imort. 2021. Product Lifecycle Management
with the Asset Administration Shell. Computers : open access journal 10,
Nr. 7. doi:10.3390/computers10070084,
.'
din1505-2-1: 'Deuter, Andreas ; Imort, Sebastian: Product Lifecycle Management
with the Asset Administration Shell. In: Computers : open access journal
Bd. 10, MDPI (2021), Nr. 7'
havard: 'A. Deuter, S. Imort, Product Lifecycle Management with the Asset Administration
Shell, Computers : Open Access Journal . 10 (2021).'
ieee: 'A. Deuter and S. Imort, “Product Lifecycle Management with the Asset Administration
Shell,” Computers : open access journal , vol. 10, no. 7, Art. no. 84,
2021, doi: 10.3390/computers10070084.'
mla: 'Deuter, Andreas, and Sebastian Imort. “Product Lifecycle Management with the
Asset Administration Shell.” Computers : Open Access Journal , vol. 10,
no. 7, 84, 2021, https://doi.org/10.3390/computers10070084.'
short: 'A. Deuter, S. Imort, Computers : Open Access Journal 10 (2021).'
ufg: 'Deuter, Andreas/Imort, Sebastian: Product Lifecycle Management with
the Asset Administration Shell, in: Computers : open access journal 10
(2021), H. 7.'
van: 'Deuter A, Imort S. Product Lifecycle Management with the Asset Administration
Shell. Computers : open access journal . 2021;10(7).'
date_created: 2022-04-25T10:13:30Z
date_updated: 2025-06-26T13:41:54Z
department:
- _id: DEP7022
- _id: DEP1306
doi: 10.3390/computers10070084
external_id:
isi:
- '000676597000001'
intvolume: ' 10'
isi: '1'
issue: '7'
language:
- iso: eng
publication: 'Computers : open access journal '
publication_identifier:
issn:
- 2073-431X
publication_status: published
publisher: 'MDPI '
status: public
title: Product Lifecycle Management with the Asset Administration Shell
type: journal_article
user_id: '83781'
volume: 10
year: '2021'
...
---
_id: '7789'
author:
- first_name: Marco
full_name: Brand, Marco
last_name: Brand
- first_name: Andreas
full_name: Deuter, Andreas
id: '62088'
last_name: Deuter
- first_name: Lukas
full_name: Galla, Lukas
last_name: Galla
- first_name: Florian
full_name: Pethig, Florian
last_name: Pethig
date_created: 2022-04-25T10:52:55Z
date_updated: 2023-03-15T13:50:11Z
department:
- _id: DEP7022
- _id: DEP1306
issue: 11-12
language:
- iso: eng
page: 24-27
publication: atp-magazin
publication_identifier:
issn:
- 0178-2320
status: public
title: 'Die Verwaltungsschale: vom Konzept über Metamodell zum Standard'
type: journal_article
user_id: '79260'
year: 2020
...
---
_id: '12794'
abstract:
- lang: eng
text: "Modern product development utilizes both Product Lifecycle Management (PLM)
and Application Lifecycle Management (ALM). PLM addresses the hardware lifecycle
of a product, whereas ALM addresses the software lifecycle. In recent years, industry
and academia have developed several PLM/ALM integration concepts to realize efficient
management of the product lifecycle across all domains. However, the solutions
available in practice are typically vendor-driven. Therefore, they are not generally
applicable even if standards such as OSLC (Open Services for Lifecycle Cooperation)
are applied.\r\n\r\nThe consortium \"Plattform Industrie 4.0\" has recently introduced
a standardized digital representation of an asset (e.g., a smart product): the
Asset Administration Shell (AAS). The AAS has the potential to integrate PLM/ALM
data sets in a single product model and hence to provide a generally applicable
interface for PLM/ALM integration. However, until now there has not been a concept
to prove this potential. The aim of this work is to develop such new strategies
(named Plm4AAS) using AAS submodels. This article explains the semi-automatic
generation of PLM/ALM submodels and how to link elements between these submodels.
The AASX Package Explorer, an AAS management software tool, is used to demonstrate
the results. The article finishes with a discussion about the potential of the
AAS as a standardized concept for PLM/ALM integration. (C) 2020 The Authors. Published
by Elsevier B.V. Peer-review under responsibility of the scientific committee
of the 5th International Conference on System-Integrated Intelligence."
author:
- first_name: Andreas
full_name: Deuter, Andreas
id: '62088'
last_name: Deuter
orcid: 0000-0002-6529-6215
- first_name: Sebastian
full_name: Imort, Sebastian
id: '74291'
last_name: Imort
citation:
ama: Deuter A, Imort S. PLM/ALM Integration With The Asset Administration Shell.
Vol 52. (Thoben KD, Dekena B, Lang W, Trächtler A, eds.). Elsevier BV; 2020:234-240.
doi:10.1016/j.promfg.2020.11.040
apa: 'Deuter, A., & Imort, S. (2020). PLM/ALM Integration With The Asset Administration
Shell. In K.-D. Thoben, B. Dekena, W. Lang, & A. Trächtler (Eds.), System-Integrated
Intelligence - Intelligent, Flexible and Connected Systems in Products and Production :
Proceedings of the 5th International Conference on System-Integrated Intelligence
(SysInt 2020), Bremen, Germany ( (Vol. 52, pp. 234–240). Elsevier BV. https://doi.org/10.1016/j.promfg.2020.11.040'
bjps: Deuter A and Imort S (2020) PLM/ALM Integration With The Asset Administration
Shell, Thoben K-D et al. (eds). Elsevier BV.
chicago: 'Deuter, Andreas, and Sebastian Imort. PLM/ALM Integration With The
Asset Administration Shell. Edited by Klaus-Dieter Thoben, Berend Dekena,
Walter Lang, and Ansgar Trächtler. System-Integrated Intelligence - Intelligent,
Flexible and Connected Systems in Products and Production : Proceedings of the
5th International Conference on System-Integrated Intelligence (SysInt 2020),
Bremen, Germany (. Vol. 52. Procedia Manufacturing. Elsevier BV, 2020. https://doi.org/10.1016/j.promfg.2020.11.040.'
chicago-de: 'Deuter, Andreas und Sebastian Imort. 2020. PLM/ALM Integration With
The Asset Administration Shell. Hg. von Klaus-Dieter Thoben, Berend Dekena,
Walter Lang, und Ansgar Trächtler. System-Integrated Intelligence - Intelligent,
Flexible and Connected Systems in Products and Production : Proceedings of the
5th International Conference on System-Integrated Intelligence (SysInt 2020),
Bremen, Germany (. Bd. 52. Procedia Manufacturing. Elsevier BV. doi:10.1016/j.promfg.2020.11.040,
.'
din1505-2-1: 'Deuter, Andreas ; Imort, Sebastian ; Thoben,
K.-D. ; Dekena, B. ; Lang, W. ;
Trächtler, A. (Hrsg.): PLM/ALM Integration With The Asset Administration
Shell, Procedia Manufacturing. Bd. 52 : Elsevier BV, 2020'
havard: A. Deuter, S. Imort, PLM/ALM Integration With The Asset Administration Shell,
Elsevier BV, 2020.
ieee: 'A. Deuter and S. Imort, PLM/ALM Integration With The Asset Administration
Shell, vol. 52. Elsevier BV, 2020, pp. 234–240. doi: 10.1016/j.promfg.2020.11.040.'
mla: 'Deuter, Andreas, and Sebastian Imort. “PLM/ALM Integration With The Asset
Administration Shell.” System-Integrated Intelligence - Intelligent, Flexible
and Connected Systems in Products and Production : Proceedings of the 5th International
Conference on System-Integrated Intelligence (SysInt 2020), Bremen, Germany (,
edited by Klaus-Dieter Thoben et al., vol. 52, Elsevier BV, 2020, pp. 234–40,
https://doi.org/10.1016/j.promfg.2020.11.040.'
short: A. Deuter, S. Imort, PLM/ALM Integration With The Asset Administration Shell,
Elsevier BV, 2020.
ufg: 'Deuter, Andreas/Imort, Sebastian: PLM/ALM Integration With The Asset
Administration Shell, Bd. 52, hg. von Thoben, Klaus-Dieter u. a., o. O. 2020 (Procedia
Manufacturing).'
van: 'Deuter A, Imort S. PLM/ALM Integration With The Asset Administration Shell.
Thoben KD, Dekena B, Lang W, Trächtler A, editors. System-Integrated Intelligence
- Intelligent, Flexible and Connected Systems in Products and Production : Proceedings
of the 5th International Conference on System-Integrated Intelligence (SysInt
2020), Bremen, Germany (. Elsevier BV; 2020. (Procedia Manufacturing; vol. 52).'
conference:
end_date: 2020-11-13
location: Online
name: 5th International Conference on System-Integrated Intelligence (SysInt)
start_date: 2020-11-11
date_created: 2025-04-15T10:20:05Z
date_updated: 2025-06-26T13:40:25Z
department:
- _id: DEP7022
- _id: DEP1306
doi: 10.1016/j.promfg.2020.11.040
editor:
- first_name: 'Klaus-Dieter '
full_name: 'Thoben, Klaus-Dieter '
last_name: Thoben
- first_name: 'Berend '
full_name: 'Dekena, Berend '
last_name: Dekena
- first_name: 'Walter '
full_name: ' Lang, Walter '
last_name: ' Lang'
- first_name: Ansgar
full_name: ' Trächtler, Ansgar'
last_name: ' Trächtler'
intvolume: ' 52'
keyword:
- PLM
- ALM
- ReqIF
- PLM XML
- OSLC
- Asset Administration Shell
language:
- iso: eng
page: 234-240
publication: 'System-Integrated Intelligence - Intelligent, Flexible and Connected
Systems in Products and Production : Proceedings of the 5th International Conference
on System-Integrated Intelligence (SysInt 2020), Bremen, Germany ('
publication_identifier:
issn:
- 2351-9789
publication_status: published
publisher: Elsevier BV
series_title: Procedia Manufacturing
status: public
title: PLM/ALM Integration With The Asset Administration Shell
type: conference_editor_article
user_id: '83781'
volume: 52
year: '2020'
...
---
_id: '7783'
abstract:
- lang: eng
text: The digitization of the industry, the drive towards smart factories as well
as the Internet of Production (IoP) require rising smartness of products and services.
Smart physical products are often mechatronic products that include increasing
amounts of software. The development of software, however, comes along with new
challenges for companies specialized in developing mechanical, electrical or electronic
products. Some of these challenges address the product lifecycle management (PLM)-related
business and work processes. The management of software lifecycles requires a
much more rigorous requirements management. Furthermore, special solutions for
management of source code in distributed development teams are needed. The build-process
and testing activities need to be conducted in a systematic manner. The generation
and provision of different licensing models need to be mastered and finally the
issue of security needs to be addressed for any product that can be networked---which
by the way is a strategic target of nearly any product developing company. Application
Lifecycle Management (ALM) covers many of the above-mentioned issues. IT solutions
for ALM are comparable to traditional PLM solutions, but focus particularly on
software as a product. Thus, these systems have become widely used by software
companies in the same manner as PLM solutions belong to the standard enterprise
IT environment of companies developing physical products. With software penetrating
traditional physical products, product managers, product developers, manufacturing
staff etc. need to work with both, PLM and ALM, since neither solution is able
to cover both domains sufficiently. However, ALM and PLM solutions feature redundant
functionality. Thus, best practices for the systematic integration of ALM and
PLM are required.
author:
- first_name: Andreas
full_name: Deuter, Andreas
id: '62088'
last_name: Deuter
orcid: 0000-0002-6529-6215
- first_name: Andreas
full_name: Otte, Andreas
id: '51466'
last_name: Otte
- first_name: Marcel
full_name: Ebert, Marcel
last_name: Ebert
- first_name: Frank
full_name: Possel-Dölken, Frank
last_name: Possel-Dölken
citation:
ama: 'Deuter A, Otte A, Ebert M, Possel-Dölken F. Developing the Requirements of
a PLM/ALM Integration: An Industrial Case Study. In: Stark J, ed. Product Lifecycle
Management (Volume 4). Decision Engineering. Springer; 2019:125-143. doi:10.1007/978-3-030-16134-7_11'
apa: 'Deuter, A., Otte, A., Ebert, M., & Possel-Dölken, F. (2019). Developing
the Requirements of a PLM/ALM Integration: An Industrial Case Study. In J. Stark
(Ed.), Product lifecycle management (Volume 4) (pp. 125–143). Springer.
https://doi.org/10.1007/978-3-030-16134-7_11'
bjps: 'Deuter A et al. (2019) Developing the Requirements of a PLM/ALM
Integration: An Industrial Case Study. In Stark J (ed.), Product Lifecycle
Management (Volume 4). Cham, Switzerland: Springer, pp. 125–143.'
chicago: 'Deuter, Andreas, Andreas Otte, Marcel Ebert, and Frank Possel-Dölken.
“Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study.”
In Product Lifecycle Management (Volume 4), edited by John Stark, 125–43.
Decision Engineering. Cham, Switzerland: Springer, 2019. https://doi.org/10.1007/978-3-030-16134-7_11.'
chicago-de: 'Deuter, Andreas, Andreas Otte, Marcel Ebert und Frank Possel-Dölken.
2019. Developing the Requirements of a PLM/ALM Integration: An Industrial Case
Study. In: Product lifecycle management (Volume 4), hg. von John Stark,
125–143. Decision Engineering. Cham, Switzerland: Springer. doi:10.1007/978-3-030-16134-7_11,
.'
din1505-2-1: 'Deuter, Andreas ; Otte, Andreas ; Ebert,
Marcel ; Possel-Dölken, Frank:
Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study.
In: Stark, J. (Hrsg.): Product
lifecycle management (Volume 4), Decision Engineering. Cham, Switzerland :
Springer, 2019, S. 125–143'
havard: 'A. Deuter, A. Otte, M. Ebert, F. Possel-Dölken, Developing the Requirements
of a PLM/ALM Integration: An Industrial Case Study, in: J. Stark (Ed.), Product
Lifecycle Management (Volume 4), Springer, Cham, Switzerland, 2019: pp. 125–143.'
ieee: 'A. Deuter, A. Otte, M. Ebert, and F. Possel-Dölken, “Developing the Requirements
of a PLM/ALM Integration: An Industrial Case Study,” in Product lifecycle management
(Volume 4), J. Stark, Ed. Cham, Switzerland: Springer, 2019, pp. 125–143.
doi: 10.1007/978-3-030-16134-7_11.'
mla: 'Deuter, Andreas, et al. “Developing the Requirements of a PLM/ALM Integration:
An Industrial Case Study.” Product Lifecycle Management (Volume 4), edited
by John Stark, Springer, 2019, pp. 125–43, https://doi.org/10.1007/978-3-030-16134-7_11.'
short: 'A. Deuter, A. Otte, M. Ebert, F. Possel-Dölken, in: J. Stark (Ed.), Product
Lifecycle Management (Volume 4), Springer, Cham, Switzerland, 2019, pp. 125–143.'
ufg: 'Deuter, Andreas u. a.: Developing the Requirements of a PLM/ALM Integration:
An Industrial Case Study, in: Stark, John (Hg.): Product lifecycle management
(Volume 4), Cham, Switzerland 2019 (Decision Engineering), S. 125–143.'
van: 'Deuter A, Otte A, Ebert M, Possel-Dölken F. Developing the Requirements of
a PLM/ALM Integration: An Industrial Case Study. In: Stark J, editor. Product
lifecycle management (Volume 4). Cham, Switzerland: Springer; 2019. p. 125–43.
(Decision Engineering).'
date_created: 2022-04-25T10:46:14Z
date_updated: 2025-06-26T13:40:03Z
department:
- _id: DEP7022
- _id: DEP1306
doi: 10.1007/978-3-030-16134-7_11
editor:
- first_name: John
full_name: Stark, John
last_name: Stark
keyword:
- Product lifecycle management
- Application Lifecycle Management
- Smart products
- Systems engineering
language:
- iso: eng
page: 125-143
place: Cham, Switzerland
publication: Product lifecycle management (Volume 4)
publication_identifier:
eisbn:
- 978-3-030-16134-7
eissn:
- 2197-6589
isbn:
- 978-3-030-16133-0
issn:
- 1619-5736
publication_status: published
publisher: Springer
series_title: Decision Engineering
status: public
title: 'Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study'
type: book_chapter
user_id: '83781'
year: '2019'
...
---
_id: '7784'
author:
- first_name: Andreas
full_name: Deuter, Andreas
id: '62088'
last_name: Deuter
- first_name: Florian
full_name: Pethig, Florian
last_name: Pethig
date_created: 2022-04-25T10:49:42Z
date_updated: 2023-03-15T13:50:11Z
department:
- _id: DEP7022
- _id: DEP1306
issue: 11-12
language:
- iso: eng
page: 28-31
publication: atp-magazin
publication_identifier:
issn:
- 0178-2320
status: public
title: 'The Digital Twin Theory: Umsetzung mit der Industrie 4.0-Verwaltungsschale'
type: journal_article
user_id: '79260'
year: 2019
...
---
_id: '551'
abstract:
- lang: eng
text: Companies that use product lifecycle management (PLM) systems need to configure
them individually. Such configuration is considered as a software development
process. This article demonstrates how the software development process for PLM
configuration can be improved by applying applicationlifecycle management (ALM)
concepts. This paper explains how such a conceptdesigncan be created and implemented.
The concept was evaluated in a real industrial case study. By this, it provides
valuable insights useablefor any company, facing similar challenges as depicted
in this paper.
author:
- first_name: Martin
full_name: Heister, Martin
id: '68780'
last_name: Heister
- first_name: Andreas
full_name: Deuter, Andreas
id: '62088'
last_name: Deuter
- first_name: B.
full_name: Schrader, B.
last_name: Schrader
citation:
ama: 'Heister M, Deuter A, Schrader B. Design of an ALM-Based Process for Configuring
PLM Systems. In: Villmer F-J, Padoano E, Department of Production Engineering
and Management, eds. Production Engineering and Management. Lemgo; 2018:31-41.'
apa: Heister, M., Deuter, A., & Schrader, B. (2018). Design of an ALM-Based
Process for Configuring PLM Systems. In F.-J. Villmer, E. Padoano, & Department
of Production Engineering and Management (Eds.), Production Engineering and
Management (pp. 31–41). Lemgo.
bjps: Heister M, Deuter A and Schrader B (2018) Design of an ALM-Based Process
for Configuring PLM Systems. In Villmer F-J, Padoano E and Department of Production
Engineering and Management (eds), Production Engineering and Management.
Lemgo, pp. 31–41.
chicago: Heister, Martin, Andreas Deuter, and B. Schrader. “Design of an ALM-Based
Process for Configuring PLM Systems.” In Production Engineering and Management,
edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering
and Management, 31–41. Lemgo, 2018.
chicago-de: 'Heister, Martin, Andreas Deuter und B. Schrader. 2018. Design of an
ALM-Based Process for Configuring PLM Systems. In: Production Engineering and
Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production
Engineering and Management, 31–41. Lemgo.'
din1505-2-1: 'Heister, Martin ; Deuter, Andreas ; Schrader,
B.: Design of an ALM-Based Process for Configuring PLM Systems. In: Villmer, F.-J. ; Padoano,
E. ; Department of Production Engineering
and Management (Hrsg.): Production Engineering and Management. Lemgo,
2018, S. 31–41'
havard: 'M. Heister, A. Deuter, B. Schrader, Design of an ALM-Based Process for
Configuring PLM Systems, in: F.-J. Villmer, E. Padoano, Department of Production
Engineering and Management (Eds.), Production Engineering and Management, Lemgo,
2018: pp. 31–41.'
ieee: M. Heister, A. Deuter, and B. Schrader, “Design of an ALM-Based Process for
Configuring PLM Systems,” in Production Engineering and Management, Lemgo,
2018, no. 1, pp. 31–41.
mla: Heister, Martin, et al. “Design of an ALM-Based Process for Configuring PLM
Systems.” Production Engineering and Management, edited by Franz-Josef
Villmer et al., no. 1, 2018, pp. 31–41.
short: 'M. Heister, A. Deuter, B. Schrader, in: F.-J. Villmer, E. Padoano, Department
of Production Engineering and Management (Eds.), Production Engineering and Management,
Lemgo, 2018, pp. 31–41.'
ufg: 'Heister, Martin et. al. (2018): Design of an ALM-Based Process for
Configuring PLM Systems, in: Franz-Josef Villmer et. al. (Hgg.): Production
Engineering and Management, Lemgo, S. 31–41.'
van: 'Heister M, Deuter A, Schrader B. Design of an ALM-Based Process for Configuring
PLM Systems. In: Villmer F-J, Padoano E, Department of Production Engineering
and Management, editors. Production Engineering and Management. Lemgo; 2018. p.
31–41.'
conference:
end_date: 2018-10-05
location: Lemgo
name: Proceedings 8th International Conference
start_date: 2018-10-04
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-13T14:03:03Z
date_updated: 2023-03-15T13:50:00Z
department:
- _id: DEP1306
- _id: DEP7022
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
issue: '1'
keyword:
- PLM
- ALM
- Software engineering
- V-model
- Scrum
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf
oa: '1'
page: 31-41
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-946856-03-0
publication_status: published
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf
status: public
title: Design of an ALM-Based Process for Configuring PLM Systems
type: conference
user_id: '62088'
year: 2018
...
---
_id: '12798'
abstract:
- lang: eng
text: "The digitization of the industry requires smart products and services. Smart
products are mechatronic products with an increasing amount of software. To get
high quality smart products to the market quickly, manufacturers need to reshape
their product lifecycle processes. They need to apply system engineering-based
methods to enable smooth cross-domain developments with a special focus on the
software domain. One significant challenge faced by manufacturers is the harmonization
of product lifecycle management (PLM), which addresses the hardware lifecycle,
with application lifecycle management (ALM), which addresses the software lifecycle.\r\n\r\nTo
support manufacturers in this challenging activity, this paper demonstrates a
proven process for developing use cases and requirements associated with a PLM/ALM
integration. This process has been elicited during an industrial case study in
a manufacturing company. This paper explains this process in detail. A generally
applicable approach for developing the requirements of a PLM/ALM integration is
extracted by removing the company-specific factors. "
author:
- first_name: Andreas
full_name: Deuter, Andreas
id: '62088'
last_name: Deuter
orcid: 0000-0002-6529-6215
- first_name: Andreas
full_name: Otte, Andreas
id: '51466'
last_name: Otte
- first_name: Marcel
full_name: Ebert, Marcel
last_name: Ebert
- first_name: Frank
full_name: Possel-Dölken, Frank
last_name: Possel-Dölken
citation:
ama: 'Deuter A, Otte A, Ebert M, Possel-Dölken F. Developing the Requirements
of a PLM/ALM Integration: An Industrial Case Study. Vol 24. (Denkena B, Thoben
KD, Trachtler A, eds.). Elsevier BV; 2018:107-113. doi:10.1016/j.promfg.2018.06.020'
apa: 'Deuter, A., Otte, A., Ebert, M., & Possel-Dölken, F. (2018). Developing
the Requirements of a PLM/ALM Integration: An Industrial Case Study. In B. Denkena,
K. D. Thoben, & A. Trachtler (Eds.), 4th International Conference on System-Integrated
Intelligence - Intelligent, Flexible and Connected Systems in Products and Production
(Vol. 24, pp. 107–113). Elsevier BV. https://doi.org/10.1016/j.promfg.2018.06.020'
bjps: 'Deuter A et al. (2018) Developing the Requirements of a
PLM/ALM Integration: An Industrial Case Study, Denkena B, Thoben KD and Trachtler
A (eds). Amsterdam [u.a.]: Elsevier BV.'
chicago: 'Deuter, Andreas, Andreas Otte, Marcel Ebert, and Frank Possel-Dölken.
Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study.
Edited by B. Denkena, K. D. Thoben, and A. Trachtler. 4th International Conference
on System-Integrated Intelligence - Intelligent, Flexible and Connected Systems
in Products and Production. Vol. 24. Procedia Manufacturing. Amsterdam [u.a.]:
Elsevier BV, 2018. https://doi.org/10.1016/j.promfg.2018.06.020.'
chicago-de: 'Deuter, Andreas, Andreas Otte, Marcel Ebert und Frank Possel-Dölken.
2018. Developing the Requirements of a PLM/ALM Integration: An Industrial Case
Study. Hg. von B. Denkena, K. D. Thoben, und A. Trachtler. 4th International
Conference on System-Integrated Intelligence - Intelligent, Flexible and Connected
Systems in Products and Production. Bd. 24. Procedia Manufacturing. Amsterdam
[u.a.]: Elsevier BV. doi:10.1016/j.promfg.2018.06.020,
.'
din1505-2-1: 'Deuter, Andreas ; Otte, Andreas ; Ebert,
Marcel ; Possel-Dölken, Frank
; Denkena, B. ; Thoben,
K. D. ; Trachtler, A. (Hrsg.):
Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study,
Procedia Manufacturing. Bd. 24. Amsterdam [u.a.] : Elsevier BV, 2018'
havard: 'A. Deuter, A. Otte, M. Ebert, F. Possel-Dölken, Developing the Requirements
of a PLM/ALM Integration: An Industrial Case Study, Elsevier BV, Amsterdam [u.a.],
2018.'
ieee: 'A. Deuter, A. Otte, M. Ebert, and F. Possel-Dölken, Developing the Requirements
of a PLM/ALM Integration: An Industrial Case Study, vol. 24. Amsterdam [u.a.]:
Elsevier BV, 2018, pp. 107–113. doi: 10.1016/j.promfg.2018.06.020.'
mla: 'Deuter, Andreas, et al. “Developing the Requirements of a PLM/ALM Integration:
An Industrial Case Study.” 4th International Conference on System-Integrated
Intelligence - Intelligent, Flexible and Connected Systems in Products and Production,
edited by B. Denkena et al., vol. 24, Elsevier BV, 2018, pp. 107–13, https://doi.org/10.1016/j.promfg.2018.06.020.'
short: 'A. Deuter, A. Otte, M. Ebert, F. Possel-Dölken, Developing the Requirements
of a PLM/ALM Integration: An Industrial Case Study, Elsevier BV, Amsterdam [u.a.],
2018.'
ufg: 'Deuter, Andreas u. a.: Developing the Requirements of a PLM/ALM Integration:
An Industrial Case Study, Bd. 24, hg. von Denkena, B./Thoben, K.D./Trachtler,
A., Amsterdam [u.a.] 2018 (Procedia Manufacturing).'
van: 'Deuter A, Otte A, Ebert M, Possel-Dölken F. Developing the Requirements of
a PLM/ALM Integration: An Industrial Case Study. Denkena B, Thoben KD, Trachtler
A, editors. 4th International Conference on System-Integrated Intelligence - Intelligent,
Flexible and Connected Systems in Products and Production. Amsterdam [u.a.]: Elsevier
BV; 2018. (Procedia Manufacturing; vol. 24).'
conference:
end_date: 20218-06-20
location: Hannover
name: 4th International Conference on System-Integrated Intelligence - Intelligent,
Flexible and Connected Systems in Products and Production
start_date: 2018-06-19
date_created: 2025-04-15T12:50:25Z
date_updated: 2025-06-26T13:39:42Z
department:
- _id: DEP7022
- _id: DEP1306
doi: 10.1016/j.promfg.2018.06.020
editor:
- first_name: B.
full_name: Denkena, B.
last_name: Denkena
- first_name: 'K. D. '
full_name: 'Thoben, K. D. '
last_name: Thoben
- first_name: A.
full_name: Trachtler, A.
last_name: Trachtler
intvolume: ' 24'
keyword:
- Product lifecycle management
- Application Lifecycle Management
- Smart products
- Systems engineering
language:
- iso: eng
page: 107-113
place: Amsterdam [u.a.]
publication: 4th International Conference on System-Integrated Intelligence - Intelligent,
Flexible and Connected Systems in Products and Production
publication_identifier:
issn:
- 2351-9789
publication_status: published
publisher: Elsevier BV
series_title: Procedia Manufacturing
status: public
title: 'Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study'
type: conference_editor_article
user_id: '83781'
volume: 24
year: '2018'
...
---
_id: '574'
abstract:
- lang: eng
text: The increasing industrial digitization is the driver for the fast emergence
of many industrial smart products. To stay competitive, the manufacturing companies
of these smart products need to optimize their internal lifecycleprocesses. Mainly,
they have to converge the software and hardware lifecycleprocesses. However, even
if this strategic necessity has been recognized, manufacturing companies struggle
to develop and implement a roadmap of such convergence.Starting point for the
realization of harmonized lifecycle processes are processmodels describing process
activities and the underlying data models. This research addresses the latter
one and aims to create a generic lifecycle data model. The research team created
and evaluated such data model referring to development artifacts such as requirements,
parts or test cases and to lifecycle artifacts such as revisions, versions and
baselines. The generic lifecycle management model was evaluated by a practical
development of a smart product. By this, the research provides a valuable result
to maintain and increase the competitiveness of manufacturing companies.
author:
- first_name: Andreas
full_name: Deuter, Andreas
id: '62088'
last_name: Deuter
- first_name: Andreas
full_name: Otte, Andreas
id: '51466'
last_name: Otte
- first_name: Marcel
full_name: Ebert, Marcel
id: '52288'
last_name: Ebert
citation:
ama: 'Deuter A, Otte A, Ebert M. Extending the Sliced V-Model to Smart Product Development.
In: Padoano E, Villmer F-J, Department of Production Engineering and Management,
eds. Production Engineering and Management. Lemgo; 2017:115-125.'
apa: Deuter, A., Otte, A., & Ebert, M. (2017). Extending the Sliced V-Model
to Smart Product Development. In E. Padoano, F.-J. Villmer, & Department of
Production Engineering and Management (Eds.), Production Engineering and Management
(pp. 115–125). Lemgo.
bjps: Deuter A, Otte A and Ebert M (2017) Extending the Sliced V-Model to
Smart Product Development. In Padoano E, Villmer F-J and Department of Production
Engineering and Management (eds), Production Engineering and Management.
Lemgo, pp. 115–125.
chicago: Deuter, Andreas, Andreas Otte, and Marcel Ebert. “Extending the Sliced
V-Model to Smart Product Development.” In Production Engineering and Management,
edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering
and Management, 115–25. Lemgo, 2017.
chicago-de: 'Deuter, Andreas, Andreas Otte und Marcel Ebert. 2017. Extending the
Sliced V-Model to Smart Product Development. In: Production Engineering and
Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production
Engineering and Management, 115–125. Lemgo.'
din1505-2-1: 'Deuter, Andreas ; Otte, Andreas ; Ebert,
Marcel: Extending the Sliced V-Model to Smart Product Development. In:
Padoano, E. ; Villmer,
F.-J. ; Department of Production
Engineering and Management (Hrsg.): Production Engineering and Management.
Lemgo, 2017, S. 115–125'
havard: 'A. Deuter, A. Otte, M. Ebert, Extending the Sliced V-Model to Smart Product
Development, in: E. Padoano, F.-J. Villmer, Department of Production Engineering
and Management (Eds.), Production Engineering and Management, Lemgo, 2017: pp.
115–125.'
ieee: A. Deuter, A. Otte, and M. Ebert, “Extending the Sliced V-Model to Smart Product
Development,” in Production Engineering and Management, Pordenone, Italy,
2017, no. 1, pp. 115–125.
mla: Deuter, Andreas, et al. “Extending the Sliced V-Model to Smart Product Development.”
Production Engineering and Management, edited by Elio Padoano et al., no.
1, 2017, pp. 115–25.
short: 'A. Deuter, A. Otte, M. Ebert, in: E. Padoano, F.-J. Villmer, Department
of Production Engineering and Management (Eds.), Production Engineering and Management,
Lemgo, 2017, pp. 115–125.'
ufg: 'Deuter, Andreas et. al. (2017): Extending the Sliced V-Model to Smart
Product Development, in: Elio Padoano et. al. (Hgg.): Production Engineering
and Management, Lemgo, S. 115–125.'
van: 'Deuter A, Otte A, Ebert M. Extending the Sliced V-Model to Smart Product Development.
In: Padoano E, Villmer F-J, Department of Production Engineering and Management,
editors. Production Engineering and Management. Lemgo; 2017. p. 115–25.'
conference:
end_date: 2017-09-29
location: Pordenone, Italy
name: Proceedings 7th International Conference
start_date: 2017-09-28
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-18T11:34:36Z
date_updated: 2023-03-15T13:50:01Z
department:
- _id: DEP1306
- _id: DEP7022
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
issue: '1'
keyword:
- PLM
- ALM
- Systems Engineering
- VDI guideline 2206
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf
oa: '1'
page: 115-125
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-946856-01-6
publication_status: published
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf
status: public
title: Extending the Sliced V-Model to Smart Product Development
type: conference
user_id: '62088'
year: 2017
...
---
_id: '610'
author:
- first_name: Andreas
full_name: Deuter, Andreas
id: '62088'
last_name: Deuter
- first_name: Andreas
full_name: Otte, Andreas
id: '51466'
last_name: Otte
- first_name: Daniel
full_name: Höllisch, Daniel
last_name: Höllisch
citation:
ama: 'Deuter A, Otte A, Höllisch D. Methodisches Vorgehen zur Entwicklung und Evaluierung
von Anwendungsfällen für die PLM/ALM-Integration. In: Trächtler A, Heinz Nixdorf
Institut, eds. Wissenschaftsforum Intelligente Technische Systeme (WInTeSys)
2017. Vol 369. Verlagsschriftenreihe des Heinz Nixdorf Instituts. Paderborn;
2017:211-222.'
apa: Deuter, A., Otte, A., & Höllisch, D. (2017). Methodisches Vorgehen zur
Entwicklung und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration.
In A. Trächtler & Heinz Nixdorf Institut (Eds.), Wissenschaftsforum Intelligente
Technische Systeme (WInTeSys) 2017 (Vol. 369, pp. 211–222). Paderborn.
bjps: Deuter A, Otte A and Höllisch D (2017) Methodisches Vorgehen zur Entwicklung
und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration. In Trächtler
A and Heinz Nixdorf Institut (eds), Wissenschaftsforum Intelligente Technische
Systeme (WInTeSys) 2017, vol. 369. Paderborn, pp. 211–222.
chicago: Deuter, Andreas, Andreas Otte, and Daniel Höllisch. “Methodisches Vorgehen
zur Entwicklung und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration.”
In Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017,
edited by Ansgar Trächtler and Heinz Nixdorf Institut, 369:211–22. Verlagsschriftenreihe
des Heinz Nixdorf Instituts. Paderborn, 2017.
chicago-de: 'Deuter, Andreas, Andreas Otte und Daniel Höllisch. 2017. Methodisches
Vorgehen zur Entwicklung und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration.
In: Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017,
hg. von Ansgar Trächtler und Heinz Nixdorf Institut, 369:211–222. Verlagsschriftenreihe
des Heinz Nixdorf Instituts. Paderborn.'
din1505-2-1: 'Deuter, Andreas ; Otte, Andreas ; Höllisch,
Daniel: Methodisches Vorgehen zur Entwicklung und Evaluierung von Anwendungsfällen
für die PLM/ALM-Integration. In: Trächtler,
A. ; Heinz Nixdorf Institut
(Hrsg.): Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017,
Verlagsschriftenreihe des Heinz Nixdorf Instituts. Bd. 369. Paderborn,
2017, S. 211–222'
havard: 'A. Deuter, A. Otte, D. Höllisch, Methodisches Vorgehen zur Entwicklung
und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration, in: A. Trächtler,
Heinz Nixdorf Institut (Eds.), Wissenschaftsforum Intelligente Technische Systeme
(WInTeSys) 2017, Paderborn, 2017: pp. 211–222.'
ieee: A. Deuter, A. Otte, and D. Höllisch, “Methodisches Vorgehen zur Entwicklung
und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration,” in Wissenschaftsforum
Intelligente Technische Systeme (WInTeSys) 2017, Paderborn, 2017, vol. 369,
pp. 211–222.
mla: Deuter, Andreas, et al. “Methodisches Vorgehen zur Entwicklung und Evaluierung
von Anwendungsfällen für die PLM/ALM-Integration.” Wissenschaftsforum Intelligente
Technische Systeme (WInTeSys) 2017, edited by Ansgar Trächtler and Heinz Nixdorf
Institut, vol. 369, 2017, pp. 211–22.
short: 'A. Deuter, A. Otte, D. Höllisch, in: A. Trächtler, Heinz Nixdorf Institut
(Eds.), Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017, Paderborn,
2017, pp. 211–222.'
ufg: 'Deuter, Andreas et. al. (2017): Methodisches Vorgehen zur Entwicklung
und Evaluierung von Anwendungsfällen für die PLM/ALM-Integration, in: Ansgar Trächtler/Heinz
Nixdorf Institut (Hgg.): Wissenschaftsforum Intelligente Technische Systeme
(WInTeSys) 2017 (=Verlagsschriftenreihe des Heinz Nixdorf Instituts 369),
Paderborn, S. 211–222.'
van: 'Deuter A, Otte A, Höllisch D. Methodisches Vorgehen zur Entwicklung und Evaluierung
von Anwendungsfällen für die PLM/ALM-Integration. In: Trächtler A, Heinz Nixdorf
Institut, editors. Wissenschaftsforum Intelligente Technische Systeme (WInTeSys)
2017. Paderborn; 2017. p. 211–22. (Verlagsschriftenreihe des Heinz Nixdorf Instituts;
vol. 369).'
conference:
end_date: 2017-11-12
location: Paderborn
name: 'Wissenschafts- und Industrieforum Intelligente Technische Systeme 2017 '
start_date: 2017-05-11
corporate_editor:
- Heinz Nixdorf Institut
- Universität Paderborn
date_created: 2019-02-21T16:30:41Z
date_updated: 2023-03-15T13:50:03Z
department:
- _id: DEP1306
- _id: DEP7022
editor:
- first_name: Ansgar
full_name: Trächtler, Ansgar
last_name: Trächtler
intvolume: ' 369'
language:
- iso: ger
page: 211-222
place: Paderborn
publication: Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017
publication_status: published
series_title: Verlagsschriftenreihe des Heinz Nixdorf Instituts
status: public
title: Methodisches Vorgehen zur Entwicklung und Evaluierung von Anwendungsfällen
für die PLM/ALM-Integration
type: conference
user_id: '62088'
volume: 369
year: 2017
...
---
_id: '7790'
author:
- first_name: Andreas
full_name: Deuter, Andreas
id: '62088'
last_name: Deuter
- first_name: Stefano
full_name: Rizzo, Stefano
last_name: Rizzo
date_created: 2022-04-25T10:55:50Z
date_updated: 2023-03-15T13:50:11Z
department:
- _id: DEP7022
- _id: DEP1306
doi: 10.1016/j.protcy.2016.08.052
intvolume: ' 26'
keyword:
- PLM
- ALM
- OSLC
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://ac.els-cdn.com/S2212017316303991/1-s2.0-S2212017316303991-main.pdf?_tid=8dfced2e-99dd-4685-8e56-e2d0e34221b2&acdnat=1550505132_3a1d65435574592a67c32f00208a06e2
oa: '1'
page: 405-412
place: ' Amsterdam [u.a.] '
publication: Procedia Technology
publication_identifier:
issn:
- 2212-0173
publication_status: published
publisher: ' Elsevier'
related_material:
link:
- relation: contains
url: https://ac.els-cdn.com/S2212017316303991/1-s2.0-S2212017316303991-main.pdf?_tid=8dfced2e-99dd-4685-8e56-e2d0e34221b2&acdnat=1550505132_3a1d65435574592a67c32f00208a06e2
status: public
title: A Critical View on PLM/ALM Convergence in Practice and Research
type: scientific_journal_article
user_id: '79260'
volume: 26
year: 2016
...