---
_id: '3806'
abstract:
- lang: eng
text: The networking of production processes by means of information technologies
(IT) has become a major field of development within industry and research. The
main target is to interlink autonomous production systems to an intelligent production
line, where products itself organise and control their manufacturing. This new
attempt in production is -actual in Germany described under the definition "Industry
4.0", the fourth industrial revolution. Basically, the essential hardware and
software to meet this objectives has been developed in other branches and is able
to upgrade machines and handling systems to cyber-physical systems. The crucial
issue to design an autonomous, intelligent production line is to generate the
exact process data for each production step, to verify this data and to transfer
it into the individual machine control. The characteristics of this main problem
increases with the degree of interactions between the processes in the production
line. In the woodworking industry, the process chain of profiling has a high degree
of interactions. The individual production steps are strictly based on another
and the result of a process effects the subsequent one respectively. To network
these processes and add IT, an integrated IT system with individual CAD/CAM system
for each process type is needed. The estimation of the interactions is done by
the simulation of the whole process chain in a virtual reality before the real
production. This enables to verify the process data, and to benefit from simultaneous
engineering. Besides the essential algorithms to calculate the process data for
the different process types and estimate the geometry corruptions due to systematic
errors and manufacturing tolerances, the consideration of the material behaviour
during the production is the determining factor to get valid data for the process
chain. The shrinking and swelling of wood and woodbased materials due to a change
of moisture content causes a geometry corruption and requires algorithms to simulate
this behaviour in the virtual real ity. The result of these algorithms for the
processes and the material behaviour are the exact process data for a specific
profile. The database for the calculations and the data storage is a developed
product data model. This product data model forms the gateway for the simulation
in the virtual reality to the machine controls.
author:
- first_name: Fabian
full_name: Böhm, Fabian
last_name: Böhm
- first_name: Fabio
full_name: Burlon, Fabio
last_name: Burlon
- first_name: Christian
full_name: Kortüm, Christian
id: '43995'
last_name: Kortüm
- first_name: Adrian
full_name: Riegel, Adrian
id: '14647'
last_name: Riegel
citation:
ama: 'Böhm F, Burlon F, Kortüm C, Riegel A. PROCESS CHAIN SIMULATION : VIRTUAL REALITY
TO MACHINE-VR2M. In: Padoano E, Villmer F-J, eds. Production Engineering and
Management Proceedings 3rd International Conference 26th and 27th September 2013
Trieste, Italy. Vol 9. Schriftenreihe Logistik. Lemgo: Hochschule Ostwestfalen-Lippe,
Fachbereich Produktion und Wirtschaft; 2014:39-53.'
apa: 'Böhm, F., Burlon, F., Kortüm, C., & Riegel, A. (2014). PROCESS CHAIN SIMULATION :
VIRTUAL REALITY TO MACHINE-VR2M. In E. Padoano & F.-J. Villmer (Eds.), Production
engineering and management proceedings 3rd international conference 26th and 27th
September 2013 Trieste, Italy (Vol. 9, pp. 39–53). Lemgo: Hochschule Ostwestfalen-Lippe,
Fachbereich Produktion und Wirtschaft.'
bjps: 'Böhm F et al. (2014) PROCESS CHAIN SIMULATION : VIRTUAL REALITY
TO MACHINE-VR2M. In Padoano E and Villmer F-J (eds), Production Engineering
and Management Proceedings 3rd International Conference 26th and 27th September
2013 Trieste, Italy, vol. 9. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich
Produktion und Wirtschaft, pp. 39–53.'
chicago: 'Böhm, Fabian, Fabio Burlon, Christian Kortüm, and Adrian Riegel. “PROCESS
CHAIN SIMULATION : VIRTUAL REALITY TO MACHINE-VR2M.” In Production Engineering
and Management Proceedings 3rd International Conference 26th and 27th September
2013 Trieste, Italy, edited by Elio Padoano and Franz-Josef Villmer, 9:39–53.
Schriftenreihe Logistik. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion
und Wirtschaft, 2014.'
chicago-de: 'Böhm, Fabian, Fabio Burlon, Christian Kortüm und Adrian Riegel. 2014.
PROCESS CHAIN SIMULATION : VIRTUAL REALITY TO MACHINE-VR2M. In: Production
engineering and management proceedings 3rd international conference 26th and 27th
September 2013 Trieste, Italy, hg. von Elio Padoano und Franz-Josef Villmer,
9:39–53. Schriftenreihe Logistik. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich
Produktion und Wirtschaft.'
din1505-2-1: 'Böhm, Fabian ; Burlon, Fabio ; Kortüm,
Christian ; Riegel, Adrian:
PROCESS CHAIN SIMULATION : VIRTUAL REALITY TO MACHINE-VR2M. In: Padoano,
E. ; Villmer, F.-J. (Hrsg.):
Production engineering and management proceedings 3rd international conference
26th and 27th September 2013 Trieste, Italy, Schriftenreihe Logistik.
Bd. 9. Lemgo : Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft,
2014, S. 39–53'
havard: 'F. Böhm, F. Burlon, C. Kortüm, A. Riegel, PROCESS CHAIN SIMULATION : VIRTUAL
REALITY TO MACHINE-VR2M, in: E. Padoano, F.-J. Villmer (Eds.), Production Engineering
and Management Proceedings 3rd International Conference 26th and 27th September
2013 Trieste, Italy, Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und
Wirtschaft, Lemgo, 2014: pp. 39–53.'
ieee: 'F. Böhm, F. Burlon, C. Kortüm, and A. Riegel, “PROCESS CHAIN SIMULATION :
VIRTUAL REALITY TO MACHINE-VR2M,” in Production engineering and management
proceedings 3rd international conference 26th and 27th September 2013 Trieste,
Italy, Trieste, Italy, 2014, vol. 9, no. 1, pp. 39–53.'
mla: 'Böhm, Fabian, et al. “PROCESS CHAIN SIMULATION : VIRTUAL REALITY TO MACHINE-VR2M.”
Production Engineering and Management Proceedings 3rd International Conference
26th and 27th September 2013 Trieste, Italy, edited by Elio Padoano and Franz-Josef
Villmer, vol. 9, no. 1, Hochschule Ostwestfalen-Lippe, Fachbereich Produktion
und Wirtschaft, 2014, pp. 39–53.'
short: 'F. Böhm, F. Burlon, C. Kortüm, A. Riegel, in: E. Padoano, F.-J. Villmer
(Eds.), Production Engineering and Management Proceedings 3rd International Conference
26th and 27th September 2013 Trieste, Italy, Hochschule Ostwestfalen-Lippe, Fachbereich
Produktion und Wirtschaft, Lemgo, 2014, pp. 39–53.'
ufg: 'Böhm, Fabian et. al. (2014): PROCESS CHAIN SIMULATION : VIRTUAL REALITY
TO MACHINE-VR2M, in: Elio Padoano/Franz-Josef Villmer (Hgg.): Production engineering
and management proceedings 3rd international conference 26th and 27th September
2013 Trieste, Italy (=Schriftenreihe Logistik 9), Lemgo, S. 39–53.'
van: 'Böhm F, Burlon F, Kortüm C, Riegel A. PROCESS CHAIN SIMULATION : VIRTUAL REALITY
TO MACHINE-VR2M. In: Padoano E, Villmer F-J, editors. Production engineering and
management proceedings 3rd international conference 26th and 27th September 2013
Trieste, Italy. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und
Wirtschaft; 2014. p. 39–53. (Schriftenreihe Logistik; vol. 9).'
conference:
end_date: 2013-09-27
location: Trieste, Italy
name: Production engineering and management proceedings 3rd international conference
start_date: 2013-09-26
date_created: 2020-11-03T10:19:04Z
date_updated: 2023-03-15T13:49:48Z
ddc:
- '330'
department:
- _id: DEP7019
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
file:
- access_level: local
content_type: application/pdf
creator: czr-e2t
date_created: 2020-11-03T10:22:19Z
date_updated: 2020-11-03T10:22:19Z
file_id: '3807'
file_name: 39.pdf
file_size: 5856773
relation: main_file
file_date_updated: 2020-11-03T10:22:19Z
has_accepted_license: '1'
intvolume: ' 9'
issue: '1'
language:
- iso: eng
page: 39 - 53
place: Lemgo
publication: Production engineering and management proceedings 3rd international conference
26th and 27th September 2013 Trieste, Italy
publication_identifier:
isbn:
- 978-3-941645-09-7
publication_status: published
publisher: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft
series_title: Schriftenreihe Logistik
status: public
title: 'PROCESS CHAIN SIMULATION : VIRTUAL REALITY TO MACHINE-VR2M'
type: conference
user_id: '74004'
volume: 9
year: 2014
...
---
_id: '3808'
abstract:
- lang: eng
text: Time and resources are already an important issue in wooden industry and handicraft
tl1at will become more and more important the next years. Components for furniture
production, particularly in the industrial sector, are usually manufactured in
automated process chains. State- of-the-art for drilling is the usage of systems
with bevels, belt drives, angle gears and rigid drilling units. Due to the operating
direction and slow working cycles, drilling processes are the bottleneck of production.
These rigid drilling gears are currently very intensive in maintenance and inflexible
because their spindles are usually mechanically coupled , which leads to unnecessary
and excessive energy consumption. Another problem with systems currently in use
is the huge amount of setup costs. They are required to adjust drilling units
on different components. This leads to an impairment of productivity of the entire
manufacturing process. At this point the question arises how quality and efficiency
of the drilling process can be increased. lt is obvious that the drilling process
must be made more intelligent and more flexible. An approach for an optimized
drilling process is the use of self-optimizing spindles in future. Therefore a
detailed analysis of drilling processes and the development of an eligible feed
control are required. According to these requirements a laboratory machine was
developed and furthermore the theoretical and practical state-of-the-art of drilling
processes were analyzed. To develop a self-optimization for drilling spindles
a research project is currently being realized in cooperation between the Laboratory
for Woodworking Technologies and Machinery (HS-OWL, Germany)), the Laboratory
for Power Electronics and Electrical Drives (HS-OWL, Germany) and the Wittenstein
motion control GmbH (Bad Pyrrnont, Germany).
author:
- first_name: Dennis
full_name: Bursch, Dennis
last_name: Bursch
- first_name: Adrian
full_name: Riegel, Adrian
id: '14647'
last_name: Riegel
- first_name: Holger
full_name: Borcherding, Holger
id: '1693'
last_name: Borcherding
- first_name: Volker
full_name: Akemeier, Volker
id: '52377'
last_name: Akemeier
citation:
ama: 'Bursch D, Riegel A, Borcherding H, Akemeier V. INTELLIGENT DRILLING- DIRECT-DRIVEN,
SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY. In: Padoano
E, Villmer F-J, eds. Production Engineering and Management Proceedings 3rd
International Conference 26th and 27th September 2013 Trieste, Italy. Vol
9. Schriftenreihe Logistik. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich
Produktion und Wirtschaft; 2014:91-102.'
apa: 'Bursch, D., Riegel, A., Borcherding, H., & Akemeier, V. (2014). INTELLIGENT
DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE
INDUSTRY. In E. Padoano & F.-J. Villmer (Eds.), Production engineering
and management proceedings 3rd international conference 26th and 27th September
2013 Trieste, Italy (Vol. 9, pp. 91–102). Lemgo: Hochschule Ostwestfalen-Lippe,
Fachbereich Produktion und Wirtschaft.'
bjps: 'Bursch D et al. (2014) INTELLIGENT DRILLING- DIRECT-DRIVEN,
SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY. In Padoano
E and Villmer F-J (eds), Production Engineering and Management Proceedings
3rd International Conference 26th and 27th September 2013 Trieste, Italy,
vol. 9. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft,
pp. 91–102.'
chicago: 'Bursch, Dennis, Adrian Riegel, Holger Borcherding, and Volker Akemeier.
“INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES
FOR FURNITURE INDUSTRY.” In Production Engineering and Management Proceedings
3rd International Conference 26th and 27th September 2013 Trieste, Italy,
edited by Elio Padoano and Franz-Josef Villmer, 9:91–102. Schriftenreihe Logistik.
Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft, 2014.'
chicago-de: 'Bursch, Dennis, Adrian Riegel, Holger Borcherding und Volker Akemeier.
2014. INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING
SPINDLES FOR FURNITURE INDUSTRY. In: Production engineering and management
proceedings 3rd international conference 26th and 27th September 2013 Trieste,
Italy, hg. von Elio Padoano und Franz-Josef Villmer, 9:91–102. Schriftenreihe
Logistik. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft.'
din1505-2-1: 'Bursch, Dennis ; Riegel, Adrian ; Borcherding,
Holger ; Akemeier, Volker:
INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES
FOR FURNITURE INDUSTRY. In: Padoano, E.
; Villmer, F.-J. (Hrsg.): Production
engineering and management proceedings 3rd international conference 26th and 27th
September 2013 Trieste, Italy, Schriftenreihe Logistik. Bd. 9. Lemgo :
Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft, 2014, S. 91–102'
havard: 'D. Bursch, A. Riegel, H. Borcherding, V. Akemeier, INTELLIGENT DRILLING-
DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY,
in: E. Padoano, F.-J. Villmer (Eds.), Production Engineering and Management Proceedings
3rd International Conference 26th and 27th September 2013 Trieste, Italy, Hochschule
Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft, Lemgo, 2014: pp. 91–102.'
ieee: D. Bursch, A. Riegel, H. Borcherding, and V. Akemeier, “INTELLIGENT DRILLING-
DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY,”
in Production engineering and management proceedings 3rd international conference
26th and 27th September 2013 Trieste, Italy, Trieste, Italy, 2014, vol. 9,
no. 3, pp. 91–102.
mla: Bursch, Dennis, et al. “INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING
HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY.” Production Engineering
and Management Proceedings 3rd International Conference 26th and 27th September
2013 Trieste, Italy, edited by Elio Padoano and Franz-Josef Villmer, vol.
9, no. 3, Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft,
2014, pp. 91–102.
short: 'D. Bursch, A. Riegel, H. Borcherding, V. Akemeier, in: E. Padoano, F.-J.
Villmer (Eds.), Production Engineering and Management Proceedings 3rd International
Conference 26th and 27th September 2013 Trieste, Italy, Hochschule Ostwestfalen-Lippe,
Fachbereich Produktion und Wirtschaft, Lemgo, 2014, pp. 91–102.'
ufg: 'Bursch, Dennis et. al. (2014): INTELLIGENT DRILLING- DIRECT-DRIVEN,
SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY, in: Elio Padoano/Franz-Josef
Villmer (Hgg.): Production engineering and management proceedings 3rd international
conference 26th and 27th September 2013 Trieste, Italy (=Schriftenreihe
Logistik 9), Lemgo, S. 91–102.'
van: 'Bursch D, Riegel A, Borcherding H, Akemeier V. INTELLIGENT DRILLING- DIRECT-DRIVEN,
SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY. In: Padoano
E, Villmer F-J, editors. Production engineering and management proceedings 3rd
international conference 26th and 27th September 2013 Trieste, Italy. Lemgo: Hochschule
Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft; 2014. p. 91–102. (Schriftenreihe
Logistik; vol. 9).'
conference:
end_date: 2013-09-27
location: Trieste, Italy
name: Production engineering and management proceedings 3rd international conference
start_date: 2013-09-26
date_created: 2020-11-03T10:24:19Z
date_updated: 2023-03-15T13:49:48Z
ddc:
- '330'
department:
- _id: DEP7019
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
file:
- access_level: local
content_type: application/pdf
creator: czr-e2t
date_created: 2020-11-03T10:26:49Z
date_updated: 2020-11-03T10:26:49Z
file_id: '3809'
file_name: 91.pdf
file_size: 4728605
relation: main_file
file_date_updated: 2020-11-03T10:26:49Z
has_accepted_license: '1'
intvolume: ' 9'
issue: '3'
language:
- iso: eng
page: 91 - 102
place: Lemgo
publication: Production engineering and management proceedings 3rd international conference
26th and 27th September 2013 Trieste, Italy
publication_identifier:
isbn:
- 978-3-941645-09-7
publication_status: published
publisher: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft
series_title: Schriftenreihe Logistik
status: public
title: INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES
FOR FURNITURE INDUSTRY
type: conference
user_id: '74004'
volume: 9
year: 2014
...
---
_id: '3810'
abstract:
- lang: eng
text: The quality sensation regarding to high gloss surfaces is mainly influenced
by the optical impression. For the evaluation of this multifactorial property
currently no standard methodical procedure is defined. Present some measurement
as well as sensory evaluations are used for the quality assessment of high gloss
surfaces. Regarding to Six Sigma, for proper customer satisfaction the voice of
the customer needs to be transferred into specific product criteria which are
measurable. Associated to the research project "Development of a global quality
concept for furniture high gloss surfaces" at the University of Applied Science
Ostwestfalen-Lippe possible customers were asked to rank some high gloss samples
according to their quality perception. In addition these high gloss surfaces were
gauged by common measurements. Building up the basis for a comprehensive quality
scale by the analysis of correlations between the measured values and the quality
impression of the customers is the subject matter. The waviness of a high gloss
surface seems to be an appropriate indicator for perceive quality. For end users
brilliance an even surface and the absence of errors are attributes of an upmarket
high gloss surface. Whatever the suface is not the tangible criterion for the
purchase decision of furniture in general, design, production quality and price,
which are directly affected by surface properties, are more clinches.
author:
- first_name: Katharina
full_name: Herzberg, Katharina
last_name: Herzberg
- first_name: Kerstin
full_name: Dekomien, Kerstin
id: '11293'
last_name: Dekomien
- first_name: Andrea
full_name: Huxol, Andrea
id: '43559'
last_name: Huxol
- first_name: Adrian
full_name: Riegel, Adrian
id: '14647'
last_name: Riegel
citation:
ama: 'Herzberg K, Dekomien K, Huxol A, Riegel A. HIGH GLOSS SURFACES: VALID QUALITY
EVALUATION. In: Padoano E, Villmer F-J, eds. Production Engineering and Management
Proceedings 3rd International Conference 26th and 27th September 2013 Trieste,
Italy. Vol 9. Schriftenreihe Logistik. Lemgo: Hochschule Ostwestfalen-Lippe,
Fachbereich Produktion und Wirtschaft; 2014:207-218.'
apa: 'Herzberg, K., Dekomien, K., Huxol, A., & Riegel, A. (2014). HIGH GLOSS
SURFACES: VALID QUALITY EVALUATION. In E. Padoano & F.-J. Villmer (Eds.),
Production engineering and management proceedings 3rd international conference
26th and 27th September 2013 Trieste, Italy (Vol. 9, pp. 207–218). Lemgo:
Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft.'
bjps: 'Herzberg K et al. (2014) HIGH GLOSS SURFACES: VALID QUALITY
EVALUATION. In Padoano E and Villmer F-J (eds), Production Engineering and
Management Proceedings 3rd International Conference 26th and 27th September 2013
Trieste, Italy, vol. 9. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich
Produktion und Wirtschaft, pp. 207–218.'
chicago: 'Herzberg, Katharina, Kerstin Dekomien, Andrea Huxol, and Adrian Riegel.
“HIGH GLOSS SURFACES: VALID QUALITY EVALUATION.” In Production Engineering
and Management Proceedings 3rd International Conference 26th and 27th September
2013 Trieste, Italy, edited by Elio Padoano and Franz-Josef Villmer, 9:207–18.
Schriftenreihe Logistik. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion
und Wirtschaft, 2014.'
chicago-de: 'Herzberg, Katharina, Kerstin Dekomien, Andrea Huxol und Adrian Riegel.
2014. HIGH GLOSS SURFACES: VALID QUALITY EVALUATION. In: Production engineering
and management proceedings 3rd international conference 26th and 27th September
2013 Trieste, Italy, hg. von Elio Padoano und Franz-Josef Villmer, 9:207–218.
Schriftenreihe Logistik. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion
und Wirtschaft.'
din1505-2-1: 'Herzberg, Katharina
; Dekomien, Kerstin ; Huxol,
Andrea ; Riegel, Adrian:
HIGH GLOSS SURFACES: VALID QUALITY EVALUATION. In: Padoano,
E. ; Villmer, F.-J. (Hrsg.):
Production engineering and management proceedings 3rd international conference
26th and 27th September 2013 Trieste, Italy, Schriftenreihe Logistik.
Bd. 9. Lemgo : Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft,
2014, S. 207–218'
havard: 'K. Herzberg, K. Dekomien, A. Huxol, A. Riegel, HIGH GLOSS SURFACES: VALID
QUALITY EVALUATION, in: E. Padoano, F.-J. Villmer (Eds.), Production Engineering
and Management Proceedings 3rd International Conference 26th and 27th September
2013 Trieste, Italy, Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und
Wirtschaft, Lemgo, 2014: pp. 207–218.'
ieee: 'K. Herzberg, K. Dekomien, A. Huxol, and A. Riegel, “HIGH GLOSS SURFACES:
VALID QUALITY EVALUATION,” in Production engineering and management proceedings
3rd international conference 26th and 27th September 2013 Trieste, Italy,
Trieste, Italy, 2014, vol. 9, no. 7, pp. 207–218.'
mla: 'Herzberg, Katharina, et al. “HIGH GLOSS SURFACES: VALID QUALITY EVALUATION.”
Production Engineering and Management Proceedings 3rd International Conference
26th and 27th September 2013 Trieste, Italy, edited by Elio Padoano and Franz-Josef
Villmer, vol. 9, no. 7, Hochschule Ostwestfalen-Lippe, Fachbereich Produktion
und Wirtschaft, 2014, pp. 207–18.'
short: 'K. Herzberg, K. Dekomien, A. Huxol, A. Riegel, in: E. Padoano, F.-J. Villmer
(Eds.), Production Engineering and Management Proceedings 3rd International Conference
26th and 27th September 2013 Trieste, Italy, Hochschule Ostwestfalen-Lippe, Fachbereich
Produktion und Wirtschaft, Lemgo, 2014, pp. 207–218.'
ufg: 'Herzberg, Katharina et. al. (2014): HIGH GLOSS SURFACES: VALID QUALITY
EVALUATION, in: Elio Padoano/Franz-Josef Villmer (Hgg.): Production engineering
and management proceedings 3rd international conference 26th and 27th September
2013 Trieste, Italy (=Schriftenreihe Logistik 9), Lemgo, S. 207–218.'
van: 'Herzberg K, Dekomien K, Huxol A, Riegel A. HIGH GLOSS SURFACES: VALID QUALITY
EVALUATION. In: Padoano E, Villmer F-J, editors. Production engineering and management
proceedings 3rd international conference 26th and 27th September 2013 Trieste,
Italy. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft;
2014. p. 207–18. (Schriftenreihe Logistik; vol. 9).'
conference:
end_date: 2013-09-27
location: Trieste, Italy
name: Production engineering and management proceedings 3rd international conference
start_date: 2013-09-26
date_created: 2020-11-03T10:28:47Z
date_updated: 2023-03-15T13:49:49Z
ddc:
- '330'
department:
- _id: DEP7019
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
file:
- access_level: local
content_type: application/pdf
creator: czr-e2t
date_created: 2020-11-03T10:30:55Z
date_updated: 2020-11-03T10:30:55Z
file_id: '3811'
file_name: 207.pdf
file_size: 4836100
relation: main_file
file_date_updated: 2020-11-03T10:30:55Z
has_accepted_license: '1'
intvolume: ' 9'
issue: '7'
language:
- iso: eng
page: 207 - 218
place: Lemgo
publication: Production engineering and management proceedings 3rd international conference
26th and 27th September 2013 Trieste, Italy
publication_identifier:
isbn:
- 978-3-941645-09-7
publication_status: published
publisher: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft
series_title: Schriftenreihe Logistik
status: public
title: 'HIGH GLOSS SURFACES: VALID QUALITY EVALUATION'
type: conference
user_id: '74004'
volume: 9
year: 2014
...
---
_id: '3812'
author:
- first_name: Benjamin
full_name: Krause, Benjamin
last_name: Krause
- first_name: Adrian
full_name: Riegel, Adrian
id: '14647'
last_name: Riegel
- first_name: Konrad
full_name: Solbrig, Konrad
id: '11010'
last_name: Solbrig
citation:
ama: 'Krause B, Riegel A, Solbrig K. A STRENGTH DESIGN APPROACH FOR CARCASS FURNITURE.
In: Padoano E, Villmer F-J, eds. Production Engineering and Management Proceedings
3rd International Conference 26th and 27th September 2013 Trieste, Italy.
Vol 9. Schriftenreihe Logistik. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich
Produktion und Wirtschaft; 2014:219-230.'
apa: 'Krause, B., Riegel, A., & Solbrig, K. (2014). A STRENGTH DESIGN APPROACH
FOR CARCASS FURNITURE. In E. Padoano & F.-J. Villmer (Eds.), Production
engineering and management proceedings 3rd international conference 26th and 27th
September 2013 Trieste, Italy (Vol. 9, pp. 219–230). Lemgo: Hochschule Ostwestfalen-Lippe,
Fachbereich Produktion und Wirtschaft.'
bjps: 'Krause B, Riegel A and Solbrig K (2014) A STRENGTH DESIGN APPROACH
FOR CARCASS FURNITURE. In Padoano E and Villmer F-J (eds), Production Engineering
and Management Proceedings 3rd International Conference 26th and 27th September
2013 Trieste, Italy, vol. 9. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich
Produktion und Wirtschaft, pp. 219–230.'
chicago: 'Krause, Benjamin, Adrian Riegel, and Konrad Solbrig. “A STRENGTH DESIGN
APPROACH FOR CARCASS FURNITURE.” In Production Engineering and Management Proceedings
3rd International Conference 26th and 27th September 2013 Trieste, Italy,
edited by Elio Padoano and Franz-Josef Villmer, 9:219–30. Schriftenreihe Logistik.
Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft, 2014.'
chicago-de: 'Krause, Benjamin, Adrian Riegel und Konrad Solbrig. 2014. A STRENGTH
DESIGN APPROACH FOR CARCASS FURNITURE. In: Production engineering and management
proceedings 3rd international conference 26th and 27th September 2013 Trieste,
Italy, hg. von Elio Padoano und Franz-Josef Villmer, 9:219–230. Schriftenreihe
Logistik. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft.'
din1505-2-1: 'Krause, Benjamin ; Riegel, Adrian ; Solbrig,
Konrad: A STRENGTH DESIGN APPROACH FOR CARCASS FURNITURE. In: Padoano,
E. ; Villmer, F.-J. (Hrsg.):
Production engineering and management proceedings 3rd international conference
26th and 27th September 2013 Trieste, Italy, Schriftenreihe Logistik.
Bd. 9. Lemgo : Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft,
2014, S. 219–230'
havard: 'B. Krause, A. Riegel, K. Solbrig, A STRENGTH DESIGN APPROACH FOR CARCASS
FURNITURE, in: E. Padoano, F.-J. Villmer (Eds.), Production Engineering and Management
Proceedings 3rd International Conference 26th and 27th September 2013 Trieste,
Italy, Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft, Lemgo,
2014: pp. 219–230.'
ieee: B. Krause, A. Riegel, and K. Solbrig, “A STRENGTH DESIGN APPROACH FOR CARCASS
FURNITURE,” in Production engineering and management proceedings 3rd international
conference 26th and 27th September 2013 Trieste, Italy, Trieste, Italy, 2014,
vol. 9, no. 8, pp. 219–230.
mla: Krause, Benjamin, et al. “A STRENGTH DESIGN APPROACH FOR CARCASS FURNITURE.”
Production Engineering and Management Proceedings 3rd International Conference
26th and 27th September 2013 Trieste, Italy, edited by Elio Padoano and Franz-Josef
Villmer, vol. 9, no. 8, Hochschule Ostwestfalen-Lippe, Fachbereich Produktion
und Wirtschaft, 2014, pp. 219–30.
short: 'B. Krause, A. Riegel, K. Solbrig, in: E. Padoano, F.-J. Villmer (Eds.),
Production Engineering and Management Proceedings 3rd International Conference
26th and 27th September 2013 Trieste, Italy, Hochschule Ostwestfalen-Lippe, Fachbereich
Produktion und Wirtschaft, Lemgo, 2014, pp. 219–230.'
ufg: 'Krause, Benjamin et. al. (2014): A STRENGTH DESIGN APPROACH FOR CARCASS
FURNITURE, in: Elio Padoano/Franz-Josef Villmer (Hgg.): Production engineering
and management proceedings 3rd international conference 26th and 27th September
2013 Trieste, Italy (=Schriftenreihe Logistik 9), Lemgo, S. 219–230.'
van: 'Krause B, Riegel A, Solbrig K. A STRENGTH DESIGN APPROACH FOR CARCASS FURNITURE.
In: Padoano E, Villmer F-J, editors. Production engineering and management proceedings
3rd international conference 26th and 27th September 2013 Trieste, Italy. Lemgo:
Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft; 2014. p.
219–30. (Schriftenreihe Logistik; vol. 9).'
conference:
end_date: 2013-09-27
location: Trieste, Italy
name: Production engineering and management proceedings 3rd international conference
start_date: 2013-09-26
date_created: 2020-11-03T10:32:34Z
date_updated: 2023-03-15T13:49:49Z
ddc:
- '330'
department:
- _id: DEP7019
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
file:
- access_level: local
content_type: application/pdf
creator: czr-e2t
date_created: 2020-11-03T10:34:10Z
date_updated: 2020-11-03T10:34:10Z
file_id: '3813'
file_name: 207.pdf
file_size: 1510444
relation: main_file
file_date_updated: 2020-11-03T10:34:10Z
has_accepted_license: '1'
intvolume: ' 9'
issue: '8'
language:
- iso: eng
page: 219 - 230
place: Lemgo
publication: Production engineering and management proceedings 3rd international conference
26th and 27th September 2013 Trieste, Italy
publication_identifier:
isbn:
- 978-3-941645-09-7
publication_status: published
publisher: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft
series_title: Schriftenreihe Logistik
status: public
title: A STRENGTH DESIGN APPROACH FOR CARCASS FURNITURE
type: conference
user_id: '74004'
volume: 9
year: 2014
...
---
_id: '5937'
abstract:
- lang: eng
text: Based on literature research, this paper tries to identify supply chain relevant
trends in the furniture industry. Also, the situation in the furniture Industry
is compared to that of the automotive and the Fast Moving Consumer Goods industry
in order to see if some of the successful supply chain strategies in these industries
can be transferred. Key findings are that supply chain measures are often underestimated,
both on the retail and on the manufacturer side. The furniture industry is found
to lack standards in IT, processes and handling equipment. However, there is growing
consensus that integrated processes are extremely important for a company's business
success.
author:
- first_name: Nicholas
full_name: Boone, Nicholas
id: '24251'
last_name: Boone
citation:
ama: 'Boone N. IMPROVING THE FURNITURE SUPPLY CHAIN BY LEARNING FROM OTHER INDUSTRIES.
In: Padoano E, Villmer F-J, eds. Production Engineering and Management Proceedings
3rd International Conference 26th and 27th September 2013 Trieste, Italy.
Schriftenreihe Logistik 9/2. ; 2014:55-67.'
apa: Boone, N. (2014). IMPROVING THE FURNITURE SUPPLY CHAIN BY LEARNING FROM OTHER
INDUSTRIES. In E. Padoano & F.-J. Villmer (Eds.), Production engineering
and management proceedings 3rd international conference 26th and 27th September
2013 Trieste, Italy (pp. 55–67). Trieste, Italy.
bjps: Boone N (2014) IMPROVING THE FURNITURE SUPPLY CHAIN BY LEARNING FROM
OTHER INDUSTRIES. In Padoano E and Villmer F-J (eds), Production Engineering
and Management Proceedings 3rd International Conference 26th and 27th September
2013 Trieste, Italy. pp. 55–67.
chicago: Boone, Nicholas. “IMPROVING THE FURNITURE SUPPLY CHAIN BY LEARNING FROM
OTHER INDUSTRIES.” In Production Engineering and Management Proceedings 3rd
International Conference 26th and 27th September 2013 Trieste, Italy, edited
by Elio Padoano and Franz-Josef Villmer, 55–67. Schriftenreihe Logistik 9/2, 2014.
chicago-de: 'Boone, Nicholas. 2014. IMPROVING THE FURNITURE SUPPLY CHAIN BY LEARNING
FROM OTHER INDUSTRIES. In: Production engineering and management proceedings
3rd international conference 26th and 27th September 2013 Trieste, Italy,
hg. von Elio Padoano und Franz-Josef Villmer, 55–67. Schriftenreihe Logistik 9/2.'
din1505-2-1: 'Boone, Nicholas: IMPROVING
THE FURNITURE SUPPLY CHAIN BY LEARNING FROM OTHER INDUSTRIES. In: Padoano,
E. ; Villmer, F.-J. (Hrsg.):
Production engineering and management proceedings 3rd international conference
26th and 27th September 2013 Trieste, Italy, Schriftenreihe Logistik 9/2,
2014, S. 55–67'
havard: 'N. Boone, IMPROVING THE FURNITURE SUPPLY CHAIN BY LEARNING FROM OTHER INDUSTRIES,
in: E. Padoano, F.-J. Villmer (Eds.), Production Engineering and Management Proceedings
3rd International Conference 26th and 27th September 2013 Trieste, Italy, 2014:
pp. 55–67.'
ieee: N. Boone, “IMPROVING THE FURNITURE SUPPLY CHAIN BY LEARNING FROM OTHER INDUSTRIES,”
in Production engineering and management proceedings 3rd international conference
26th and 27th September 2013 Trieste, Italy, Trieste, Italy, 2014, pp. 55–67.
mla: Boone, Nicholas. “IMPROVING THE FURNITURE SUPPLY CHAIN BY LEARNING FROM OTHER
INDUSTRIES.” Production Engineering and Management Proceedings 3rd International
Conference 26th and 27th September 2013 Trieste, Italy, edited by Elio Padoano
and Franz-Josef Villmer, 2014, pp. 55–67.
short: 'N. Boone, in: E. Padoano, F.-J. Villmer (Eds.), Production Engineering and
Management Proceedings 3rd International Conference 26th and 27th September 2013
Trieste, Italy, 2014, pp. 55–67.'
ufg: 'Boone, Nicholas (2014): IMPROVING THE FURNITURE SUPPLY CHAIN BY LEARNING
FROM OTHER INDUSTRIES, in: Elio Padoano/Franz-Josef Villmer (Hgg.): Production
engineering and management proceedings 3rd international conference 26th and 27th
September 2013 Trieste, Italy (=Schriftenreihe Logistik 9/2), S. 55–67.'
van: 'Boone N. IMPROVING THE FURNITURE SUPPLY CHAIN BY LEARNING FROM OTHER INDUSTRIES.
In: Padoano E, Villmer F-J, editors. Production engineering and management proceedings
3rd international conference 26th and 27th September 2013 Trieste, Italy. 2014.
p. 55–67. (Schriftenreihe Logistik 9/2).'
conference:
end_date: 2013-09-27
location: Trieste, Italy
name: 3rd international conference Production engineering and management proceedings
start_date: 2013-09-26
date_created: 2021-05-19T07:26:57Z
date_updated: 2023-03-15T13:50:03Z
department:
- _id: DEP1520
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
id: '14290'
last_name: Villmer
language:
- iso: eng
page: 55 - 67
publication: Production engineering and management proceedings 3rd international conference
26th and 27th September 2013 Trieste, Italy
publication_identifier:
isbn:
- 978-3-941645-09-7
publication_status: published
series_title: Schriftenreihe Logistik 9/2
status: public
title: IMPROVING THE FURNITURE SUPPLY CHAIN BY LEARNING FROM OTHER INDUSTRIES
type: conference
user_id: '15514'
year: 2014
...
---
_id: '725'
citation:
ama: Padoano E, Villmer F-J, Production Engineering and Management, eds. Production
Engineering and Management. Vol 9. Lemgo; 2013:282.
apa: Padoano, E., Villmer, F.-J., & Production Engineering and Management (Eds.).
(2013). Production Engineering and Management (Vol. 9, p. 282). Presented
at the 3th international conference, Lemgo.
bjps: Padoano E, Villmer F-J and Production Engineering and Management (eds)
(2013) Production Engineering and Management. Lemgo.
chicago: Padoano, Elio, Franz-Josef Villmer, and Production Engineering and Management,
eds. Production Engineering and Management. Vol. 9. Schriftenreihe Logistik.
Lemgo, 2013.
chicago-de: Padoano, Elio, Franz-Josef Villmer und Production Engineering and Management,
Hrsg. 2013. Production Engineering and Management. Bd. 9. Schriftenreihe
Logistik. Lemgo.
din1505-2-1: 'Padoano, E. ; Villmer, F.-J. ; Production
Engineering and Management (Hrsg.): Production Engineering and Management,
Schriftenreihe Logistik. Bd. 9. Lemgo, 2013'
havard: E. Padoano, F.-J. Villmer, Production Engineering and Management, eds.,
Production Engineering and Management, Lemgo, 2013.
ieee: E. Padoano, F.-J. Villmer, and Production Engineering and Management, Eds.,
Production Engineering and Management, vol. 9. Lemgo, 2013, p. 282.
mla: Padoano, Elio, et al., editors. Production Engineering and Management.
Vol. 9, 2013, p. 282.
short: E. Padoano, F.-J. Villmer, Production Engineering and Management, eds., Production
Engineering and Management, Lemgo, 2013.
ufg: 'Padoano, Elio et. al. (Hgg.) (2013): Production Engineering and Management
(=Schriftenreihe Logistik 9), Lemgo.'
van: Padoano E, Villmer F-J, Production Engineering and Management, editors. Production
Engineering and Management. Lemgo; 2013. (Schriftenreihe Logistik; vol. 9).
conference:
end_date: 2013-09-27
location: Trieste, Italy
name: 3th international conference
start_date: 2013-09-26
corporate_editor:
- Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-18T15:12:28Z
date_updated: 2023-03-15T13:50:09Z
ddc:
- '650'
department:
- _id: DEP1306
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
id: '14290'
last_name: Villmer
file:
- access_level: open_access
content_type: application/pdf
creator: hka-zn8
date_created: 2019-03-13T08:38:52Z
date_updated: 2019-03-13T08:38:52Z
file_id: '726'
file_name: PEM 2013_Proceedings_Druckversion.pdf
file_size: 8969103
relation: main_file
success: 1
file_date_updated: 2019-03-13T08:38:52Z
has_accepted_license: '1'
intvolume: ' 9'
language:
- iso: eng
oa: '1'
page: '282'
place: Lemgo
publication_identifier:
isbn:
- 978-3-941645-09-7
publication_status: published
series_title: Schriftenreihe Logistik
status: public
title: Production Engineering and Management
type: conference_editor
user_id: '45673'
volume: 9
year: 2013
...
---
_id: '4203'
author:
- first_name: Dennis
full_name: Bursch, Dennis
last_name: Bursch
- first_name: Adrian
full_name: Riegel, Adrian
id: '14647'
last_name: Riegel
- first_name: Holger
full_name: Borcherding, Holger
id: '1693'
last_name: Borcherding
- first_name: Volker
full_name: Akemeier, Volker
id: '52377'
last_name: Akemeier
citation:
ama: 'Bursch D, Riegel A, Borcherding H, Akemeier V. INTELLIGENT DRILLING- DIRECT-DRIVEN,
SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY. In: Padoano
E, Villmer F-J, eds. Production Engineering and Management Proceedings 3rd
International Conference 26th and 27th September 2013 Trieste, Italy. ; 2013:91-102.'
apa: Bursch, D., Riegel, A., Borcherding, H., & Akemeier, V. (2013). INTELLIGENT
DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE
INDUSTRY. In E. Padoano & F.-J. Villmer (Eds.), Production engineering
and management proceedings 3rd international conference 26th and 27th September
2013 Trieste, Italy (pp. 91–102). Trieste, Italy.
bjps: Bursch D et al. (2013) INTELLIGENT DRILLING- DIRECT-DRIVEN,
SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY. In Padoano
E and Villmer F-J (eds), Production Engineering and Management Proceedings
3rd International Conference 26th and 27th September 2013 Trieste, Italy.
pp. 91–102.
chicago: Bursch, Dennis, Adrian Riegel, Holger Borcherding, and Volker Akemeier.
“INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES
FOR FURNITURE INDUSTRY.” In Production Engineering and Management Proceedings
3rd International Conference 26th and 27th September 2013 Trieste, Italy,
edited by Elio Padoano and Franz-Josef Villmer, 91–102, 2013.
chicago-de: 'Bursch, Dennis, Adrian Riegel, Holger Borcherding und Volker Akemeier.
2013. INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING
SPINDLES FOR FURNITURE INDUSTRY. In: Production engineering and management
proceedings 3rd international conference 26th and 27th September 2013 Trieste,
Italy, hg. von Elio Padoano und Franz-Josef Villmer, 91–102.'
din1505-2-1: 'Bursch, Dennis ; Riegel, Adrian ; Borcherding,
Holger ; Akemeier, Volker:
INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES
FOR FURNITURE INDUSTRY. In: Padoano, E.
; Villmer, F.-J. (Hrsg.): Production
engineering and management proceedings 3rd international conference 26th and 27th
September 2013 Trieste, Italy, 2013, S. 91–102'
havard: 'D. Bursch, A. Riegel, H. Borcherding, V. Akemeier, INTELLIGENT DRILLING-
DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY,
in: E. Padoano, F.-J. Villmer (Eds.), Production Engineering and Management Proceedings
3rd International Conference 26th and 27th September 2013 Trieste, Italy, 2013:
pp. 91–102.'
ieee: D. Bursch, A. Riegel, H. Borcherding, and V. Akemeier, “INTELLIGENT DRILLING-
DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY,”
in Production engineering and management proceedings 3rd international conference
26th and 27th September 2013 Trieste, Italy, Trieste, Italy, 2013, pp. 91–102.
mla: Bursch, Dennis, et al. “INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING
HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY.” Production Engineering
and Management Proceedings 3rd International Conference 26th and 27th September
2013 Trieste, Italy, edited by Elio Padoano and Franz-Josef Villmer, 2013,
pp. 91–102.
short: 'D. Bursch, A. Riegel, H. Borcherding, V. Akemeier, in: E. Padoano, F.-J.
Villmer (Eds.), Production Engineering and Management Proceedings 3rd International
Conference 26th and 27th September 2013 Trieste, Italy, 2013, pp. 91–102.'
ufg: 'Bursch, Dennis et. al. (2013): INTELLIGENT DRILLING- DIRECT-DRIVEN,
SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY, in: Elio Padoano/Franz-Josef
Villmer (Hgg.): Production engineering and management proceedings 3rd international
conference 26th and 27th September 2013 Trieste, Italy, S. 91–102.'
van: 'Bursch D, Riegel A, Borcherding H, Akemeier V. INTELLIGENT DRILLING- DIRECT-DRIVEN,
SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY. In: Padoano
E, Villmer F-J, editors. Production engineering and management proceedings 3rd
international conference 26th and 27th September 2013 Trieste, Italy. 2013. p.
91–102.'
conference:
end_date: 2013-09-27
location: Trieste, Italy
name: 3rd international conference of Production engineering and management proceedings
start_date: 2013-09-26
date_created: 2020-12-08T10:35:51Z
date_updated: 2023-03-15T13:49:51Z
ddc:
- '330'
department:
- _id: DEP6020
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
file:
- access_level: local
content_type: application/pdf
creator: czr-e2t
date_created: 2020-12-08T10:39:01Z
date_updated: 2020-12-08T10:39:01Z
file_id: '4204'
file_name: 91.pdf
file_size: 4728605
relation: main_file
file_date_updated: 2020-12-08T10:39:01Z
has_accepted_license: '1'
language:
- iso: eng
page: 91 - 102
publication: Production engineering and management proceedings 3rd international conference
26th and 27th September 2013 Trieste, Italy
publication_identifier:
isbn:
- 978-3-941645-09-7
publication_status: published
status: public
title: INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES
FOR FURNITURE INDUSTRY
type: conference
user_id: '74004'
year: 2013
...
---
_id: '3483'
author:
- first_name: Dieter
full_name: Dresselhaus, Dieter
id: '58485'
last_name: Dresselhaus
- first_name: Wilfried
full_name: Jungkind, Wilfried
id: '14059'
last_name: Jungkind
citation:
ama: 'Dresselhaus D, Jungkind W. STRATEGIC MANAGEMENT AT HORA GMBH & CO. KG.
In: Padoano E, Villmer F-J, eds. Production Engineering and Management Proceedings
3rd International Conference 26th and 27th September 2013 Trieste, Italy.
Vol 9. Schriftenreihe Logistik . Lemgo: Hochschule Ostwestfalen-Lippe; 2013:157-170.'
apa: 'Dresselhaus, D., & Jungkind, W. (2013). STRATEGIC MANAGEMENT AT HORA GMBH
& CO. KG. In E. Padoano & F.-J. Villmer (Eds.), Production engineering
and management proceedings 3rd international conference 26th and 27th September
2013 Trieste, Italy (Vol. 9, pp. 157–170). Lemgo: Hochschule Ostwestfalen-Lippe.'
bjps: 'Dresselhaus D and Jungkind W (2013) STRATEGIC MANAGEMENT AT HORA GMBH
& CO. KG. In Padoano E and Villmer F-J (eds), Production Engineering and
Management Proceedings 3rd International Conference 26th and 27th September 2013
Trieste, Italy, vol. 9. Lemgo: Hochschule Ostwestfalen-Lippe, pp. 157–170.'
chicago: 'Dresselhaus, Dieter, and Wilfried Jungkind. “STRATEGIC MANAGEMENT AT HORA
GMBH & CO. KG.” In Production Engineering and Management Proceedings 3rd
International Conference 26th and 27th September 2013 Trieste, Italy, edited
by Elio Padoano and Franz-Josef Villmer, 9:157–70. Schriftenreihe Logistik . Lemgo:
Hochschule Ostwestfalen-Lippe, 2013.'
chicago-de: 'Dresselhaus, Dieter und Wilfried Jungkind. 2013. STRATEGIC MANAGEMENT
AT HORA GMBH & CO. KG. In: Production engineering and management proceedings
3rd international conference 26th and 27th September 2013 Trieste, Italy,
hg. von Elio Padoano und Franz-Josef Villmer, 9:157–170. Schriftenreihe Logistik
. Lemgo: Hochschule Ostwestfalen-Lippe.'
din1505-2-1: 'Dresselhaus, Dieter
; Jungkind, Wilfried: STRATEGIC
MANAGEMENT AT HORA GMBH & CO. KG. In: Padoano,
E. ; Villmer, F.-J. (Hrsg.):
Production engineering and management proceedings 3rd international conference
26th and 27th September 2013 Trieste, Italy, Schriftenreihe Logistik .
Bd. 9. Lemgo : Hochschule Ostwestfalen-Lippe, 2013, S. 157–170'
havard: 'D. Dresselhaus, W. Jungkind, STRATEGIC MANAGEMENT AT HORA GMBH & CO.
KG, in: E. Padoano, F.-J. Villmer (Eds.), Production Engineering and Management
Proceedings 3rd International Conference 26th and 27th September 2013 Trieste,
Italy, Hochschule Ostwestfalen-Lippe, Lemgo, 2013: pp. 157–170.'
ieee: D. Dresselhaus and W. Jungkind, “STRATEGIC MANAGEMENT AT HORA GMBH & CO.
KG,” in Production engineering and management proceedings 3rd international
conference 26th and 27th September 2013 Trieste, Italy, Trieste, Italy, 2013,
vol. 9, pp. 157–170.
mla: Dresselhaus, Dieter, and Wilfried Jungkind. “STRATEGIC MANAGEMENT AT HORA GMBH
& CO. KG.” Production Engineering and Management Proceedings 3rd International
Conference 26th and 27th September 2013 Trieste, Italy, edited by Elio Padoano
and Franz-Josef Villmer, vol. 9, Hochschule Ostwestfalen-Lippe, 2013, pp. 157–70.
short: 'D. Dresselhaus, W. Jungkind, in: E. Padoano, F.-J. Villmer (Eds.), Production
Engineering and Management Proceedings 3rd International Conference 26th and 27th
September 2013 Trieste, Italy, Hochschule Ostwestfalen-Lippe, Lemgo, 2013, pp.
157–170.'
ufg: 'Dresselhaus, Dieter/Jungkind, Wilfried (2013): STRATEGIC MANAGEMENT
AT HORA GMBH & CO. KG, in: Elio Padoano/Franz-Josef Villmer (Hgg.): Production
engineering and management proceedings 3rd international conference 26th and 27th
September 2013 Trieste, Italy (=Schriftenreihe Logistik 9), Lemgo,
S. 157–170.'
van: 'Dresselhaus D, Jungkind W. STRATEGIC MANAGEMENT AT HORA GMBH & CO. KG.
In: Padoano E, Villmer F-J, editors. Production engineering and management proceedings
3rd international conference 26th and 27th September 2013 Trieste, Italy. Lemgo:
Hochschule Ostwestfalen-Lippe; 2013. p. 157–70. (Schriftenreihe Logistik ; vol.
9).'
conference:
end_date: 2013-09-27
location: Trieste, Italy
name: 'Production engineering and management: proceedings 3rd international conference
26th and 27th September 2013 '
start_date: 2013-09-26
date_created: 2020-09-15T08:24:53Z
date_updated: 2023-03-15T13:49:47Z
ddc:
- '330'
department:
- _id: DEP7020
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
file:
- access_level: open_access
content_type: application/pdf
creator: czr-e2t
date_created: 2020-09-15T08:31:12Z
date_updated: 2020-09-15T08:31:12Z
file_id: '3484'
file_name: 157.pdf
file_size: 4952996
relation: main_file
success: 1
file_date_updated: 2020-09-15T08:31:12Z
has_accepted_license: '1'
intvolume: ' 9'
language:
- iso: eng
oa: '1'
page: 157 - 170
place: Lemgo
publication: Production engineering and management proceedings 3rd international conference
26th and 27th September 2013 Trieste, Italy
publication_identifier:
isbn:
- 978-3-941645-09-7
publication_status: published
publisher: Hochschule Ostwestfalen-Lippe
series_title: 'Schriftenreihe Logistik '
status: public
title: STRATEGIC MANAGEMENT AT HORA GMBH & CO. KG
type: conference
user_id: '74004'
volume: 9
year: 2013
...