---
_id: '432'
abstract:
- lang: eng
text: "The trend of increasing technological complexity of machines mainly correlates
with the integration of additional functions in machines. Increasing functionality
\ of the machines leads to an increased number of control \r\nelements,
which limits the clarity of the machine operation and leads to higher cognitive
demands in the machine operation. Due to the growing functional range of production
machines the demand of usability for the operating systems continues to
\ grow. The selection and design of icons for the identification of controls
\ contributes significantly to usability, especially for intuitive operation
of production machines. \r\nThe aim of this study is to investigate the
\ intuitive usability of production machines, to consider its use of graphical
\ elements (icons) and to derive recommendations for a demand-oriented
\ selection and design of icons. To achieve this goal, laboratory studies
at five modern production machines (laser sintering machine, CNC universal
\ lathe, plastic injection molding machine, laser processing machine, woodworking
\ machine) - each with different operating concept - were performed. The results
\ of the study show that the used symbols in the examined machines are
\ only limited self-explanatory and intuitive, and thus have significant
deficits for easy and intuitive operation. Especially the combination of screens
and electronic keys or switches was often criticized and leads to uncertainty
in the operation. As a result, recommendations for the design of icons on production
machines are given. "
author:
- first_name: Daniel
full_name: Riediger, Daniel
id: '52263'
last_name: Riediger
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Alexander
full_name: Schlee, Alexander
id: '48127'
last_name: Schlee
citation:
ama: 'Riediger D, Hinrichsen S, Schlee A. Ergonomic Design of Graphical Control
Elements on Production Machines. In: Villmer F-J, Padoano E, Department of Production
Engineering and Management, eds. Production Engineering and Management.
Lemgo: Hochschule Ostwestfalen-Lippe; 2015:123-130.'
apa: 'Riediger, D., Hinrichsen, S., & Schlee, A. (2015). Ergonomic Design of
Graphical Control Elements on Production Machines. In F.-J. Villmer, E. Padoano,
& Department of Production Engineering and Management, (Eds.), Production
Engineering and Management (pp. 123–130). Lemgo: Hochschule Ostwestfalen-Lippe.'
bjps: 'Riediger D, Hinrichsen S and Schlee A (2015) Ergonomic Design of Graphical
Control Elements on Production Machines. In Villmer F-J, Padoano E and Department
of Production Engineering and Management, (eds), Production Engineering and
Management. Lemgo: Hochschule Ostwestfalen-Lippe, pp. 123–130.'
chicago: 'Riediger, Daniel, Sven Hinrichsen, and Alexander Schlee. “Ergonomic Design
of Graphical Control Elements on Production Machines.” In Production Engineering
and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department
of Production Engineering and Management, 123–30. Lemgo: Hochschule Ostwestfalen-Lippe,
2015.'
chicago-de: 'Riediger, Daniel, Sven Hinrichsen und Alexander Schlee. 2015. Ergonomic
Design of Graphical Control Elements on Production Machines. In: Production
Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und
Department of Production Engineering and Management, 123–130. Lemgo: Hochschule
Ostwestfalen-Lippe.'
din1505-2-1: 'Riediger, Daniel ; Hinrichsen, Sven ; Schlee,
Alexander: Ergonomic Design of Graphical Control Elements on Production
Machines. In: Villmer, F.-J. ; Padoano, E. ; Department
of Production Engineering and Management, (Hrsg.): Production Engineering
and Management. Lemgo : Hochschule Ostwestfalen-Lippe, 2015, S. 123–130'
havard: 'D. Riediger, S. Hinrichsen, A. Schlee, Ergonomic Design of Graphical Control
Elements on Production Machines, in: F.-J. Villmer, E. Padoano, Department of
Production Engineering and Management, (Eds.), Production Engineering and Management,
Hochschule Ostwestfalen-Lippe, Lemgo, 2015: pp. 123–130.'
ieee: D. Riediger, S. Hinrichsen, and A. Schlee, “Ergonomic Design of Graphical
Control Elements on Production Machines,” in Production Engineering and Management,
Trieste, 2015, no. 1, pp. 123–130.
mla: Riediger, Daniel, et al. “Ergonomic Design of Graphical Control Elements on
Production Machines.” Production Engineering and Management, edited by
Franz-Josef Villmer et al., no. 1, Hochschule Ostwestfalen-Lippe, 2015, pp. 123–30.
short: 'D. Riediger, S. Hinrichsen, A. Schlee, in: F.-J. Villmer, E. Padoano, Department
of Production Engineering and Management, (Eds.), Production Engineering and Management,
Hochschule Ostwestfalen-Lippe, Lemgo, 2015, pp. 123–130.'
ufg: 'Riediger, Daniel et. al. (2015): Ergonomic Design of Graphical Control
Elements on Production Machines, in: Franz-Josef Villmer et. al. (Hgg.): Production
Engineering and Management, Lemgo, S. 123–130.'
van: 'Riediger D, Hinrichsen S, Schlee A. Ergonomic Design of Graphical Control
Elements on Production Machines. In: Villmer F-J, Padoano E, Department of Production
Engineering and Management, editors. Production Engineering and Management. Lemgo:
Hochschule Ostwestfalen-Lippe; 2015. p. 123–30.'
conference:
end_date: 2015-10-02
location: Trieste
name: Proceedings 5th international conference
start_date: 2015-10-01
corporate_editor:
- Department of Production Engineering and Management,
- Hochschule Ostwestfalen-Lippe
date_created: 2019-01-16T16:07:56Z
date_updated: 2023-03-15T13:49:52Z
department:
- _id: DEP7020
- _id: DEP1306
- _id: DEP1305
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
issue: '1'
keyword:
- Usability
- production mach ine
- icons
- usability
- hum an-machine compatibility
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fb7/fileadmin/download/labore/industrialengineering/pdf/Veroeffentlichungen/PEM2015_Ergonomic_Design_of_Graphical_Control_Elements_on_Production_Machines.pdf
oa: '1'
page: 123-130
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-941645-11-0
publication_status: published
publisher: Hochschule Ostwestfalen-Lippe
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fb7/fileadmin/download/labore/industrialengineering/pdf/Veroeffentlichungen/PEM2015_Ergonomic_Design_of_Graphical_Control_Elements_on_Production_Machines.pdf
status: public
title: Ergonomic Design of Graphical Control Elements on Production Machines
type: conference
user_id: '45673'
year: 2015
...
---
_id: '585'
abstract:
- lang: eng
text: "Many low-cost 3D printers have been brought to market over the last couple
of years. Most of them apply a Fused Layer Manufacturing (FLM) process, and have
made 3D printing a great success amongst hobbyists, the maker community and students.
One drawback of such inexpensive equipment is a limited build envelope, which
prevents this from becoming a significant contributor to industrial production.
To overcome these limits, it is not sufficient to simply upscale dimensions, but
the overall concept of such machines must be completely re-thought, as well as
the concepts behind several building blocks, components and the process software
system.\r\nProblems such as shrinkage of build material, support material and
machine parts in combination with long printer head travels, temperature distribution
and moisture effects all have to be solved. In addition, larger parts need longer
process times. Therefore, reduction of process times and an increase in productivity
are necessary in order to enable economic production.\r\nSome of these problems
can be solved by using more than one printer head for production, by using new
materials and inventing new nozzle systems as distinct solutions for big printers.
Nevertheless, to solve all these problems, the development of special machines
for large parts is necessary: not component-wise but as a whole system. Large
parts could then be successfully produced in several industries, using large,
inexpensive FLMmachines.\r\n"
author:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
id: '14290'
last_name: Villmer
- first_name: Lars
full_name: Witte, Lars
id: '45920'
last_name: Witte
citation:
ama: 'Villmer F-J, Witte L. Large Scale 3D-Printers: The Challenge of Outgrowing
Do-It-Yourself. In: Padoano E, Villmer F-J, Department of Production Engineering
and Management, eds. Production Engineering and Management. Lemgo; 2015:111-122.'
apa: 'Villmer, F.-J., & Witte, L. (2015). Large Scale 3D-Printers: The Challenge
of Outgrowing Do-It-Yourself. In E. Padoano, F.-J. Villmer, & Department of
Production Engineering and Management (Eds.), Production Engineering and Management
(pp. 111–122). Lemgo.'
bjps: 'Villmer F-J and Witte L (2015) Large Scale 3D-Printers: The Challenge
of Outgrowing Do-It-Yourself. In Padoano E, Villmer F-J and Department of Production
Engineering and Management (eds), Production Engineering and Management.
Lemgo, pp. 111–122.'
chicago: 'Villmer, Franz-Josef, and Lars Witte. “Large Scale 3D-Printers: The Challenge
of Outgrowing Do-It-Yourself.” In Production Engineering and Management,
edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering
and Management, 111–22. Lemgo, 2015.'
chicago-de: 'Villmer, Franz-Josef und Lars Witte. 2015. Large Scale 3D-Printers:
The Challenge of Outgrowing Do-It-Yourself. In: Production Engineering and
Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production
Engineering and Management, 111–122. Lemgo.'
din1505-2-1: 'Villmer, Franz-Josef
; Witte, Lars: Large Scale 3D-Printers:
The Challenge of Outgrowing Do-It-Yourself. In: Padoano,
E. ; Villmer, F.-J. ; Department of Production Engineering and Management
(Hrsg.): Production Engineering and Management. Lemgo, 2015, S. 111–122'
havard: 'F.-J. Villmer, L. Witte, Large Scale 3D-Printers: The Challenge of Outgrowing
Do-It-Yourself, in: E. Padoano, F.-J. Villmer, Department of Production Engineering
and Management (Eds.), Production Engineering and Management, Lemgo, 2015: pp.
111–122.'
ieee: 'F.-J. Villmer and L. Witte, “Large Scale 3D-Printers: The Challenge of Outgrowing
Do-It-Yourself,” in Production Engineering and Management, Trieste, Italy,
2015, no. 1, pp. 111–122.'
mla: 'Villmer, Franz-Josef, and Lars Witte. “Large Scale 3D-Printers: The Challenge
of Outgrowing Do-It-Yourself.” Production Engineering and Management, edited
by Elio Padoano et al., no. 1, 2015, pp. 111–22.'
short: 'F.-J. Villmer, L. Witte, in: E. Padoano, F.-J. Villmer, Department of Production
Engineering and Management (Eds.), Production Engineering and Management, Lemgo,
2015, pp. 111–122.'
ufg: 'Villmer, Franz-Josef/Witte, Lars (2015): Large Scale 3D-Printers: The
Challenge of Outgrowing Do-It-Yourself, in: Elio Padoano et. al. (Hgg.): Production
Engineering and Management, Lemgo, S. 111–122.'
van: 'Villmer F-J, Witte L. Large Scale 3D-Printers: The Challenge of Outgrowing
Do-It-Yourself. In: Padoano E, Villmer F-J, Department of Production Engineering
and Management, editors. Production Engineering and Management. Lemgo; 2015. p.
111–22.'
conference:
end_date: 2015-10-02
location: Trieste, Italy
name: Proceedings5th International Conference
start_date: 2015-10-01
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-18T14:42:21Z
date_updated: 2023-03-15T13:50:02Z
department:
- _id: DEP1306
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
issue: '1'
keyword:
- 3D printing
- FLM
- build envelope
- large-scale
- thermoplastic polymers
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf
oa: '1'
page: 111-122
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-941645-11-0
publication_status: published
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf
status: public
title: 'Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself'
type: conference
user_id: '45673'
year: 2015
...
---
_id: '588'
abstract:
- lang: eng
text: "While common measurement techniques like gloss or color measurement are widely
used in industry for quality assessment of furniture high gloss surfaces, they
indicate only a weak correlation to the quality perceived by the customer. Topography
based approaches achieve higher correlation to human perception but are often
based on linear measurement which cannot be applied for an overall assessment
of larger surfaces. Thus an algorithm was developed to calculate a specific value
based on topographic features, such as orange peel, within the research project
‘Development of a comprehensive quality concept for furniture high gloss surfaces’,
funded by the federal Ministry of Education and Research. For the evaluation of
short waved structures on furniture high gloss surfaces the ratio of hill height
to hill area was chosen. This parameter proves to be applicable for an evaluation
of the extent of a single.\r\n"
author:
- first_name: Andrea
full_name: Huxol, Andrea
id: '43559'
last_name: Huxol
- first_name: Adrian
full_name: Riegel, Adrian
id: '14647'
last_name: Riegel
- first_name: Kerstin
full_name: Dekomien, Kerstin
id: '59843'
last_name: Dekomien
citation:
ama: 'Huxol A, Riegel A, Dekomien K. Development of an Algorithm for Measuring the
Quality of High Gloss Surfaces Correlated to Human Perception. In: Padoano E,
Villmer F-J, Department of Production Engineering and Management, eds. Production
Engineering and Management. Lemgo; 2015:99-110.'
apa: Huxol, A., Riegel, A., & Dekomien, K. (2015). Development of an Algorithm
for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception.
In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management
(Eds.), Production Engineering and Management (pp. 99–110). Lemgo.
bjps: Huxol A, Riegel A and Dekomien K (2015) Development of an Algorithm
for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception.
In Padoano E, Villmer F-J and Department of Production Engineering and Management
(eds), Production Engineering and Management. Lemgo, pp. 99–110.
chicago: Huxol, Andrea, Adrian Riegel, and Kerstin Dekomien. “Development of an
Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human
Perception.” In Production Engineering and Management, edited by Elio Padoano,
Franz-Josef Villmer, and Department of Production Engineering and Management,
99–110. Lemgo, 2015.
chicago-de: 'Huxol, Andrea, Adrian Riegel und Kerstin Dekomien. 2015. Development
of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to
Human Perception. In: Production Engineering and Management, hg. von Elio
Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management,
99–110. Lemgo.'
din1505-2-1: 'Huxol, Andrea ; Riegel, Adrian ; Dekomien,
Kerstin: Development of an Algorithm for Measuring the Quality of High
Gloss Surfaces Correlated to Human Perception. In: Padoano,
E. ; Villmer, F.-J. ; Department of Production Engineering and Management
(Hrsg.): Production Engineering and Management. Lemgo, 2015, S. 99–110'
havard: 'A. Huxol, A. Riegel, K. Dekomien, Development of an Algorithm for Measuring
the Quality of High Gloss Surfaces Correlated to Human Perception, in: E. Padoano,
F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production
Engineering and Management, Lemgo, 2015: pp. 99–110.'
ieee: A. Huxol, A. Riegel, and K. Dekomien, “Development of an Algorithm for Measuring
the Quality of High Gloss Surfaces Correlated to Human Perception,” in Production
Engineering and Management, Trieste, Italy, 2015, no. 1, pp. 99–110.
mla: Huxol, Andrea, et al. “Development of an Algorithm for Measuring the Quality
of High Gloss Surfaces Correlated to Human Perception.” Production Engineering
and Management, edited by Elio Padoano et al., no. 1, 2015, pp. 99–110.
short: 'A. Huxol, A. Riegel, K. Dekomien, in: E. Padoano, F.-J. Villmer, Department
of Production Engineering and Management (Eds.), Production Engineering and Management,
Lemgo, 2015, pp. 99–110.'
ufg: 'Huxol, Andrea et. al. (2015): Development of an Algorithm for Measuring
the Quality of High Gloss Surfaces Correlated to Human Perception, in: Elio Padoano
et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 99–110.'
van: 'Huxol A, Riegel A, Dekomien K. Development of an Algorithm for Measuring the
Quality of High Gloss Surfaces Correlated to Human Perception. In: Padoano E,
Villmer F-J, Department of Production Engineering and Management, editors. Production
Engineering and Management. Lemgo; 2015. p. 99–110.'
conference:
end_date: 2015-10-02
location: Trieste, Italy
name: Proceedings5th International Conference
start_date: 2015-10-01
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-18T15:13:34Z
date_updated: 2023-03-15T13:50:02Z
department:
- _id: DEP1306
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
issue: '1'
keyword:
- High gloss
- surface measurement
- topographic features
- quality assessment
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf
oa: '1'
page: 99-110
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-941645-11-0
publication_status: published
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf
status: public
title: Development of an Algorithm for Measuring the Quality of High Gloss Surfaces
Correlated to Human Perception
type: conference
user_id: '45673'
year: 2015
...
---
_id: '597'
abstract:
- lang: eng
text: "This paper is aimed to discuss current research using data mining techniques
and industry statistics in production environments. The general research approach
is based on the idea of using data mining processes and techniques of industry
statistics to find rare and hidden patterns behind failures of complex components.
A case study will be applied to illustrate how the technique is carried out and
where the limits of this approach occur. The case study deals with a component
supplier of printing machines, which received an increasing number of client complaints,
all related to one distinct problem. The observed failures seem to occur only
among clients with very high quality standards. The affected component undergoes
a very complex production process with several steps in different departments.
Every single production unit records data information from multiple process variables
and at different points in time. In the beginning there was no understanding of
the failure causes in production at all. Therefore a huge amount of production
data had to be analyzed to find the pattern that discloses the failure.\r\nThe
data mining process starts with a first step in which the given data sets are
prepared and then cleaned. Followed up by building a prediction model. The aim
is to detect the root causes for failures and to predict potential failures in
affected components. This paper shows how to use data mining to get the answer
on pressing production failures.\r\n"
author:
- first_name: Eva
full_name: Scheideler, Eva
id: '61522'
last_name: Scheideler
- first_name: Andrea
full_name: Ahlemeyer-Stubbe, Andrea
last_name: Ahlemeyer-Stubbe
citation:
ama: 'Scheideler E, Ahlemeyer-Stubbe A. Data Mining: A Potential Detector to Find
Failure in Complex Components. In: Padoano E, Villmer FJ, Department of Production
Engineering and Management, Hochschule Ostwestfalen-Lippe, eds. Production
Engineering and Management : Proceedings, 5th International Conference, October
1 and 2, 2015, Trieste, Italy. Hochschule Ostwestfalen-Lippe; 2015:163-174.'
apa: 'Scheideler, E., & Ahlemeyer-Stubbe, A. (2015). Data Mining: A Potential
Detector to Find Failure in Complex Components. In E. Padoano, F.-J. Villmer,
Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe
(Eds.), Production engineering and management : proceedings, 5th international
conference, October 1 and 2, 2015, Trieste, Italy (Issue 1, pp. 163–174).
Hochschule Ostwestfalen-Lippe.'
bjps: 'Scheideler E and Ahlemeyer-Stubbe A (2015) Data Mining: A Potential
Detector to Find Failure in Complex Components. In Padoano E et al. (eds), Production
Engineering and Management : Proceedings, 5th International Conference, October
1 and 2, 2015, Trieste, Italy. Lemgo: Hochschule Ostwestfalen-Lippe, pp. 163–174.'
chicago: 'Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Data Mining: A Potential
Detector to Find Failure in Complex Components.” In Production Engineering
and Management : Proceedings, 5th International Conference, October 1 and 2, 2015,
Trieste, Italy, edited by Elio Padoano, Franz-Josef Villmer, Department of
Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, 163–74.
Lemgo: Hochschule Ostwestfalen-Lippe, 2015.'
chicago-de: 'Scheideler, Eva und Andrea Ahlemeyer-Stubbe. 2015. Data Mining: A Potential
Detector to Find Failure in Complex Components. In: Production engineering
and management : proceedings, 5th international conference, October 1 and 2, 2015,
Trieste, Italy, hg. von Elio Padoano, Franz-Josef Villmer, Department of Production
Engineering and Management, und Hochschule Ostwestfalen-Lippe, 163–174. Lemgo:
Hochschule Ostwestfalen-Lippe.'
din1505-2-1: 'Scheideler, Eva ; Ahlemeyer-Stubbe, Andrea: Data Mining:
A Potential Detector to Find Failure in Complex Components. In: Padoano,
E. ; Villmer, F.-J. ; Department of Production Engineering and Management
; Hochschule Ostwestfalen-Lippe
(Hrsg.): Production engineering and management : proceedings, 5th international
conference, October 1 and 2, 2015, Trieste, Italy. Lemgo : Hochschule Ostwestfalen-Lippe,
2015, S. 163–174'
havard: 'E. Scheideler, A. Ahlemeyer-Stubbe, Data Mining: A Potential Detector to
Find Failure in Complex Components, in: E. Padoano, F.-J. Villmer, Department
of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.),
Production Engineering and Management : Proceedings, 5th International Conference,
October 1 and 2, 2015, Trieste, Italy, Hochschule Ostwestfalen-Lippe, Lemgo, 2015:
pp. 163–174.'
ieee: 'E. Scheideler and A. Ahlemeyer-Stubbe, “Data Mining: A Potential Detector
to Find Failure in Complex Components,” in Production engineering and management :
proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy,
Trieste, Italy, 2015, no. 1, pp. 163–174.'
mla: 'Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Data Mining: A Potential Detector
to Find Failure in Complex Components.” Production Engineering and Management :
Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy,
edited by Elio Padoano et al., no. 1, Hochschule Ostwestfalen-Lippe, 2015, pp.
163–74.'
short: 'E. Scheideler, A. Ahlemeyer-Stubbe, in: E. Padoano, F.-J. Villmer, Department
of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.),
Production Engineering and Management : Proceedings, 5th International Conference,
October 1 and 2, 2015, Trieste, Italy, Hochschule Ostwestfalen-Lippe, Lemgo, 2015,
pp. 163–174.'
ufg: 'Scheideler, Eva/Ahlemeyer-Stubbe, Andrea: Data Mining: A Potential
Detector to Find Failure in Complex Components, in: Padoano, Elio u. a. (Hgg.):
Production engineering and management : proceedings, 5th international conference,
October 1 and 2, 2015, Trieste, Italy, Lemgo 2015, S. 163–174.'
van: 'Scheideler E, Ahlemeyer-Stubbe A. Data Mining: A Potential Detector to Find
Failure in Complex Components. In: Padoano E, Villmer FJ, Department of Production
Engineering and Management, Hochschule Ostwestfalen-Lippe, editors. Production
engineering and management : proceedings, 5th international conference, October
1 and 2, 2015, Trieste, Italy. Lemgo: Hochschule Ostwestfalen-Lippe; 2015. p.
163–74.'
conference:
end_date: 2015-10-02
location: Trieste, Italy
name: '5th International Conference "Production Engineering and Management" '
start_date: 2015-10-01
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-19T07:15:57Z
date_updated: 2024-03-22T13:12:47Z
department:
- _id: DEP7000
- _id: DEP1306
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
id: '14290'
last_name: Villmer
issue: '1'
keyword:
- Data mining
- production failure
- multi-variant analysis
- multivariate process control
- predictive modelling
- case study
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf
oa: '1'
page: 163-174
place: Lemgo
publication: 'Production engineering and management : proceedings, 5th international
conference, October 1 and 2, 2015, Trieste, Italy'
publication_identifier:
isbn:
- 978-3-941645-11-0
publication_status: published
publisher: Hochschule Ostwestfalen-Lippe
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf
status: public
title: 'Data Mining: A Potential Detector to Find Failure in Complex Components'
type: conference
user_id: '83781'
year: '2015'
...
---
_id: '598'
abstract:
- lang: eng
text: "The aerospace sector is characterized by long product life cycles and a need
for lightweight design. Additive manufacturing is a technology that produces parts
layer by layer and thus enables the manufacturing of any complex parts at nearly
no extra costs. A topology optimization enhances the part’s\r\nperformance for
their special purpose. The results are often complex bionic structures that cannot
be produced with conventional manufacturing technologies. The paper analyzes how
the high potential of this technologycan be applied to aerospace parts. A topology
optimization will be conducted for an aircraft part explaining the crucial points
and a life cycle analysis examines the achieved sustainable improvements for the
aircraft’s life cycle.\r\n"
author:
- first_name: Andrea
full_name: Huxol, Andrea
id: '43559'
last_name: Huxol
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
id: '14290'
last_name: Villmer
citation:
ama: 'Huxol A, Villmer F-J. Hybrid Manufacturing Machines: Combining Additive and
Subtractive Manufacturing Technologies. In: Padoano E, Villmer F-J, Department
of Production Engineering and Management, eds. Production Engineering and Management.
Lemgo; 2015:207-218.'
apa: 'Huxol, A., & Villmer, F.-J. (2015). Hybrid Manufacturing Machines: Combining
Additive and Subtractive Manufacturing Technologies. In E. Padoano, F.-J. Villmer,
& Department of Production Engineering and Management (Eds.), Production
Engineering and Management (pp. 207–218). Lemgo.'
bjps: 'Huxol A and Villmer F-J (2015) Hybrid Manufacturing Machines: Combining
Additive and Subtractive Manufacturing Technologies. In Padoano E, Villmer F-J
and Department of Production Engineering and Management (eds), Production Engineering
and Management. Lemgo, pp. 207–218.'
chicago: 'Huxol, Andrea, and Franz-Josef Villmer. “Hybrid Manufacturing Machines:
Combining Additive and Subtractive Manufacturing Technologies.” In Production
Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and
Department of Production Engineering and Management, 207–18. Lemgo, 2015.'
chicago-de: 'Huxol, Andrea und Franz-Josef Villmer. 2015. Hybrid Manufacturing Machines:
Combining Additive and Subtractive Manufacturing Technologies. In: Production
Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und
Department of Production Engineering and Management, 207–218. Lemgo.'
din1505-2-1: 'Huxol, Andrea ; Villmer, Franz-Josef: Hybrid Manufacturing
Machines: Combining Additive and Subtractive Manufacturing Technologies. In: Padoano, E. ; Villmer,
F.-J. ; Department of Production
Engineering and Management (Hrsg.): Production Engineering and Management.
Lemgo, 2015, S. 207–218'
havard: 'A. Huxol, F.-J. Villmer, Hybrid Manufacturing Machines: Combining Additive
and Subtractive Manufacturing Technologies, in: E. Padoano, F.-J. Villmer, Department
of Production Engineering and Management (Eds.), Production Engineering and Management,
Lemgo, 2015: pp. 207–218.'
ieee: 'A. Huxol and F.-J. Villmer, “Hybrid Manufacturing Machines: Combining Additive
and Subtractive Manufacturing Technologies,” in Production Engineering and
Management, Trieste, Italy, 2015, no. 1, pp. 207–218.'
mla: 'Huxol, Andrea, and Franz-Josef Villmer. “Hybrid Manufacturing Machines: Combining
Additive and Subtractive Manufacturing Technologies.” Production Engineering
and Management, edited by Elio Padoano et al., no. 1, 2015, pp. 207–18.'
short: 'A. Huxol, F.-J. Villmer, in: E. Padoano, F.-J. Villmer, Department of Production
Engineering and Management (Eds.), Production Engineering and Management, Lemgo,
2015, pp. 207–218.'
ufg: 'Huxol, Andrea/Villmer, Franz-Josef (2015): Hybrid Manufacturing Machines:
Combining Additive and Subtractive Manufacturing Technologies, in: Elio Padoano
et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 207–218.'
van: 'Huxol A, Villmer F-J. Hybrid Manufacturing Machines: Combining Additive and
Subtractive Manufacturing Technologies. In: Padoano E, Villmer F-J, Department
of Production Engineering and Management, editors. Production Engineering and
Management. Lemgo; 2015. p. 207–18.'
conference:
end_date: 2015-10-02
location: Trieste, Italy
name: Proceedings5th International Conference
start_date: 2015-10-01
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-19T07:26:35Z
date_updated: 2023-03-15T13:50:03Z
department:
- _id: DEP1306
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
issue: '1'
keyword:
- Additive manufacturing
- topology optimization
- aerospace
- life cycle costs
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf
oa: '1'
page: 207-218
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-941645-11-0
publication_status: published
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf
status: public
title: 'Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing
Technologies'
type: conference
user_id: '45673'
year: 2015
...
---
_id: '599'
abstract:
- lang: eng
text: "Order picking has long been identified as the most labor costly and intensively
activity in warehouse management. The orders from the customers need to be fulfilled
tightly and timely. In order to keep the required high service level, the warehouse
has to increase the picking productivity under the constraints of limited capacity.
This paper concerns a man-togoods order picking system, in which the order pickers
have to drive with a pallet jack to the storage locations. Considering that the
orders are mostly small orders which consist of less lines, it is efficient to
combine severalsingle customer orders into one picking order. Under this circumstance,
this paper intends to answer the question of how customer orders should be grouped
into picking orders with the aim of minimizing the total travel length through
the warehouse. Consequently the productivity of the order picking system can be
improved. An optimization problem for order batching is introduced. The optimization
method of order batching is then proposed. Based on the simulation of different
scenarios of incoming orders, it can be concluded that the developed method is
effective in improving the productivity of the concerned order picking system.\r\n"
author:
- first_name: Li
full_name: Li, Li
id: '58482'
last_name: Li
- first_name: L.
full_name: Schulze, L.
last_name: Schulze
citation:
ama: 'Li L, Schulze L. Improving the Productivity of a Man-to-Goods Order Picking
System through Optimization of Order Batching. In: Padoano E, Villmer F-J, Department
of Production Engineering and Management, eds. Production Engineering and Management.
Lemgo; 2015:319-326.'
apa: Li, L., & Schulze, L. (2015). Improving the Productivity of a Man-to-Goods
Order Picking System through Optimization of Order Batching. In E. Padoano, F.-J.
Villmer, & Department of Production Engineering and Management (Eds.), Production
Engineering and Management (pp. 319–326). Lemgo.
bjps: Li L and Schulze L (2015) Improving the Productivity of a Man-to-Goods
Order Picking System through Optimization of Order Batching. In Padoano E, Villmer
F-J and Department of Production Engineering and Management (eds), Production
Engineering and Management. Lemgo, pp. 319–326.
chicago: Li, Li, and L. Schulze. “Improving the Productivity of a Man-to-Goods Order
Picking System through Optimization of Order Batching.” In Production Engineering
and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department
of Production Engineering and Management, 319–26. Lemgo, 2015.
chicago-de: 'Li, Li und L. Schulze. 2015. Improving the Productivity of a Man-to-Goods
Order Picking System through Optimization of Order Batching. In: Production
Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und
Department of Production Engineering and Management, 319–326. Lemgo.'
din1505-2-1: 'Li, Li ; Schulze,
L.: Improving the Productivity of a Man-to-Goods Order Picking System through
Optimization of Order Batching. In: Padoano,
E. ; Villmer, F.-J. ; Department of Production Engineering and Management
(Hrsg.): Production Engineering and Management. Lemgo, 2015, S. 319–326'
havard: 'L. Li, L. Schulze, Improving the Productivity of a Man-to-Goods Order Picking
System through Optimization of Order Batching, in: E. Padoano, F.-J. Villmer,
Department of Production Engineering and Management (Eds.), Production Engineering
and Management, Lemgo, 2015: pp. 319–326.'
ieee: L. Li and L. Schulze, “Improving the Productivity of a Man-to-Goods Order
Picking System through Optimization of Order Batching,” in Production Engineering
and Management, Trieste, Italy, 2015, no. 1, pp. 319–326.
mla: Li, Li, and L. Schulze. “Improving the Productivity of a Man-to-Goods Order
Picking System through Optimization of Order Batching.” Production Engineering
and Management, edited by Elio Padoano et al., no. 1, 2015, pp. 319–26.
short: 'L. Li, L. Schulze, in: E. Padoano, F.-J. Villmer, Department of Production
Engineering and Management (Eds.), Production Engineering and Management, Lemgo,
2015, pp. 319–326.'
ufg: 'Li, Li/Schulze, L. (2015): Improving the Productivity of a Man-to-Goods
Order Picking System through Optimization of Order Batching, in: Elio Padoano
et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 319–326.'
van: 'Li L, Schulze L. Improving the Productivity of a Man-to-Goods Order Picking
System through Optimization of Order Batching. In: Padoano E, Villmer F-J, Department
of Production Engineering and Management, editors. Production Engineering and
Management. Lemgo; 2015. p. 319–26.'
conference:
end_date: 2015-10-02
location: Trieste, Italy
name: Proceedings5th International Conference
start_date: 2015-10-01
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-19T07:34:56Z
date_updated: 2023-03-15T13:50:03Z
department:
- _id: DEP7000
- _id: DEP1306
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
issue: '1'
keyword:
- Order picking
- man-to-goods
- order batching
- picking productivity
- genetic algorithm
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf
oa: '1'
page: 319-326
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-941645-11-0
publication_status: published
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf
status: public
title: Improving the Productivity of a Man-to-Goods Order Picking System through Optimization
of Order Batching
type: conference
user_id: '45673'
year: 2015
...
---
_id: '335'
abstract:
- lang: eng
text: "The University of Trieste (Università degli Studi di Trieste) and the Ostwestfalen-Lippe
University of Applied Sciences introduced the International Double Degree Master
Program ‘Production Engineering and Management’ in 2011. Its aim is to give students
in Italy and Germany, along with other countries, the chance to learn the necessary
abilities from lecturers and each other. This Master Program has been accompanied
by the International Conference ‘Production Engineering and Management’ from the
very beginning. The annual International Conference on Production Engineering
and Management took place for the fifth time this year, and can therefore be considered
a well-established event originating from the partnership between the University
of Trieste (Italy) and the Ostwestfalen-Lippe \r\nUniversity of Applied Sciences
(Germany). The main aim of the five conferences has been to bridge the gap between
production engineering and management theory and practice, by offering a platform
where academia and industry could discuss practical and pressing questions. In
this respect, the fifth conference (PEM 2015) continues along the same path of
the first four successful conferences, which were held in Pordenone (2011), Lemgo
(2012), Trieste (2013) and again in Lemgo (2014). PEM 2015 benefited further from
contributions from other universities and from research and industry projects.
Especially the contributions of successful graduates of the double degree Master’s
program Production Engineering and Management and those of other postgraduate
researchers from several European count ries have been enforced in this year.
The title ‘An active interaction between university and industry’ introduced two
years ago to emphasize lively cooperation proved to be more than appropriate in
the conference’s main orientation:\r\n\r\n•\tTo present current research projects
and their results at a highly sophisticated scientific level\r\n•\tTo discuss
recent developments in industry and society\r\n•\tTo bring professionals, specialists
and students together\r\n•\tTo enable professionals, lecturers and professors
to exchange experiences\r\n•\tTo familiarize young professionals and students
with scientific conference procedures\r\n•\tTo give postgraduate and Ph.D. students
the chance to present a paper\r\n•\tTo show the two partner regions’ uniqueness
and performance\r\n•\tTo attract students for an international career in the industry\r\n•\tTo
encourage students to be open-minded about different cultures, mentalities and
manners\r\n\r\nPEM 2015 took place between October 1 and 2, 2015 at the University
of \r\nTrieste. The program was defined by the Organizing and Scientific Committees
and clustered into five scientific sessions. Both universities and their partner
organizations debated on these topics by reporting their research, experiences
and success stories. The scientific sessions dealt with technical and engineering
issues, as well as management topics, and included contributions by researchers
from academia and industry. The extended abstracts and full papers of the \r\ncontributions
underwent a double-blind review process. The 35 accepted presentations were assigned,
according to their subject, to one of the following sessions:, ‘Industrial Engineering
and Lean Management’, ‘Technology and Supporting Services for Manufacturing’,
‘Product Lifecycle, from Concept to Market and Use’, ‘Supply Chain Design and
Management’ and ‘Management Practices and Methodologies’. These sessions have
been carefully selected by the organizing and scientific committees and are aimed
at highlighting some of the current production industry’s most discussed topics.
Therefore, the articles sustainability and revolutionary developments in modern
industry and cover not only production in a narrower sense, but also new aspects
of: innovation and \r\nproduct development, of supply chains, of quality improvement.
The proceedings have been drawn together to form 35 full papers of the scientific
contributions. The articles were reviewed by the Scientific Committee before being
accepted. \r\nAs the editors of the proceedings, we would like to thank all contributors,
the \r\nreferees who accepted the burden of reviewing the abstracts as well as
the full papers and the members of the Organizing Committee and Scientific Committee
for planning such an effective conference."
citation:
ama: Padoano E, Villmer FJ, Department of Production Engineering and Management,
Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management.
Vol 11.; 2015:418.
apa: Padoano, E., Villmer, F.-J., Department of Production Engineering and Management,
& Hochschule Ostwestfalen-Lippe (Eds.). (2015). Production Engineering
and Management (Vol. 11, Issue ., p. 418).
bjps: Padoano E et al. (eds) (2015) Production Engineering and
Management. Lemgo.
chicago: Padoano, Elio, Franz-Josef Villmer, Department of Production Engineering
and Management, and Hochschule Ostwestfalen-Lippe, eds. Production Engineering
and Management. Vol. 11. Schriftenreihe Logistik. Lemgo, 2015.
chicago-de: Padoano, Elio, Franz-Josef Villmer, Department of Production Engineering
and Management, und Hochschule Ostwestfalen-Lippe, Hrsg. 2015. Production Engineering
and Management. Bd. 11. Schriftenreihe Logistik. Lemgo.
din1505-2-1: 'Padoano, E. ; Villmer, F.-J. ; Department
of Production Engineering and Management ; Hochschule
Ostwestfalen-Lippe (Hrsg.): Production Engineering and Management,
Schriftenreihe Logistik. Bd. 11. Lemgo, 2015'
havard: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management,
Hochschule Ostwestfalen-Lippe, eds., Production Engineering and Management, Lemgo,
2015.
ieee: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management,
and Hochschule Ostwestfalen-Lippe, Eds., Production Engineering and Management,
vol. 11, no. . Lemgo, 2015, p. 418.
mla: Padoano, Elio, et al., editors. Production Engineering and Management.
no. ., 2015, p. 418.
short: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management,
Hochschule Ostwestfalen-Lippe, eds., Production Engineering and Management, Lemgo,
2015.
ufg: 'Padoano, Elio u. a.: Production Engineering and Management,
Bd. 11, Lemgo 2015 (Schriftenreihe Logistik).'
van: Padoano E, Villmer FJ, Department of Production Engineering and Management,
Hochschule Ostwestfalen-Lippe, editors. Production Engineering and Management.
Lemgo; 2015. (Schriftenreihe Logistik; vol. 11).
conference:
end_date: 2010-10-02
location: Trieste, Italy
name: 5th International Conference
start_date: 2015-10-01
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2018-12-11T13:32:50Z
date_updated: 2025-04-11T09:06:38Z
ddc:
- '650'
department:
- _id: DEP1306
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
id: '14290'
last_name: Villmer
file:
- access_level: open_access
content_type: application/pdf
creator: hka-zn8
date_created: 2018-12-11T13:27:43Z
date_updated: 2018-12-11T13:27:43Z
file_id: '336'
file_name: PEM_Tagung_zusammen2015.pdf
file_size: 12169441
relation: main_file
success: 1
file_date_updated: 2018-12-11T13:27:43Z
has_accepted_license: '1'
intvolume: ' 11'
issue: .
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf
oa: '1'
page: '418'
place: Lemgo
publication_identifier:
isbn:
- 978-3-941645-11-0
publication_status: published
series_title: Schriftenreihe Logistik
status: public
title: Production Engineering and Management
type: conference_editor
user_id: '83781'
volume: 11
year: '2015'
...