[{"citation":{"chicago-de":"Dobrzanski, P. und Wilfried Jungkind. 2018. Human Resources and Organizational Development in the Context of Industry 4.0. In: Production engineering and management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 147–158. Lemgo.","din1505-2-1":"Dobrzanski, P. ; Jungkind, Wilfried: Human Resources and Organizational Development in the Context of Industry 4.0. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production engineering and management. Lemgo, 2018, S. 147–158","short":"P. Dobrzanski, W. Jungkind, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018, pp. 147–158.","havard":"P. Dobrzanski, W. Jungkind, Human Resources and Organizational Development in the Context of Industry 4.0, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp. 147–158.","bjps":"Dobrzanski P and Jungkind W (2018) Human Resources and Organizational Development in the Context of Industry 4.0. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 147–158.","mla":"Dobrzanski, P., and Wilfried Jungkind. “Human Resources and Organizational Development in the Context of Industry 4.0.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 147–58.","ufg":"Dobrzanski, P./Jungkind, Wilfried (2018): Human Resources and Organizational Development in the Context of Industry 4.0, in: Franz-Josef Villmer et. al. (Hgg.): Production engineering and management, Lemgo, S. 147–158.","ama":"Dobrzanski P, Jungkind W. Human Resources and Organizational Development in the Context of Industry 4.0. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2018:147-158.","van":"Dobrzanski P, Jungkind W. Human Resources and Organizational Development in the Context of Industry 4.0. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production engineering and management. Lemgo; 2018. p. 147–58.","chicago":"Dobrzanski, P., and Wilfried Jungkind. “Human Resources and Organizational Development in the Context of Industry 4.0.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 147–58. Lemgo, 2018.","ieee":"P. Dobrzanski and W. Jungkind, “Human Resources and Organizational Development in the Context of Industry 4.0,” in Production engineering and management, Lemgo, 2018, no. 1, pp. 147–158.","apa":"Dobrzanski, P., & Jungkind, W. (2018). Human Resources and Organizational Development in the Context of Industry 4.0. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Production engineering and management (pp. 147–158). Lemgo."},"title":"Human Resources and Organizational Development in the Context of Industry 4.0","status":"public","page":"147-158","year":2018,"author":[{"first_name":"P.","last_name":"Dobrzanski","full_name":"Dobrzanski, P."},{"id":"14059","last_name":"Jungkind","first_name":"Wilfried","full_name":"Jungkind, Wilfried"}],"corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"editor":[{"full_name":"Villmer, Franz-Josef","first_name":"Franz-Josef","last_name":"Villmer"},{"first_name":"Elio","last_name":"Padoano","full_name":"Padoano, Elio"}],"date_updated":"2023-03-15T13:49:39Z","publication_identifier":{"isbn":["978-3-946856-03-0"]},"publication":"Production engineering and management","date_created":"2018-11-16T12:12:37Z","keyword":["Industry 4.0","Smart Factory","Digital transformation","Staff and organizational development"],"language":[{"iso":"eng"}],"publication_status":"published","issue":"1","abstract":[{"text":"In future, advancing digitalization will entail extensive change for businesses. To date, there are only sporadically implemented examples of Smart Factories and these are rather technically (specifically information technology) oriented. Phoenix Contact therefore decided to use a tailor-made approach to implement the digital transition towards becoming a Smart Factory. With the participation of the senior management affected, other internal support areas and the works council, an image of the future for the Smart Factory was developed. Based on the main future processes the appropriate organizational structure was selected and all participants could now be trained in the performance of new tasks. In addition, this allows for technological concepts to be chosen and judiciously incorporated in further stages. In this paper, the “SmartOrg@Combicon” project will be illustrated as the initial phase in the course of Smart Factory implementation.\r\n","lang":"eng"}],"department":[{"_id":"DEP7020"}],"conference":{"name":"Proceedings 8 th International Conference","location":"Lemgo","end_date":"2018-10-05","start_date":"2018-10-04"},"user_id":"74004","type":"conference","_id":"238","place":"Lemgo"},{"_id":"686","language":[{"iso":"eng"}],"place":"Lemgo","keyword":["SRCPSP","Simulation","Petri Nets","Proposal development"],"editor":[{"full_name":"Villmer, Franz-Josef","first_name":"Franz-Josef","last_name":"Villmer"},{"first_name":"Elio","full_name":"Padoano, Elio","last_name":"Padoano"}],"corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"date_updated":"2023-03-15T13:50:08Z","user_id":"74004","type":"conference","date_created":"2019-02-13T16:11:29Z","publication":"Production Engineering and Management","publication_identifier":{"isbn":["978-3-946856-03-0"]},"page":"271-281","status":"public","issue":"1","abstract":[{"text":"A high level of productivity for current and future services is a critical success factor for companies. When the productivity of services is unknown or incorrect, resources are wasted and opportunities are missed. To respond to this challenge, a simulation modelfor the prospective description of a complex service provision was developed in order to support companies to create a robust offering of services.Focusing on the domain of factory planning, we illustrate howan extended Stochastic Resource-Constrained Project Scheduling Problem(SRCPSP) can be applied for developing proposals. The presented validation study confirms that the approach is capable to calculate and optimize the planning objectives when developing a service for complex engineering projects","lang":"eng"}],"department":[{"_id":"DEP7020"},{"_id":"DEP1305"}],"conference":{"start_date":"2018-10-04","end_date":"2018-10-05","location":"Lemgo","name":"Proceedings 8th International Conference"},"year":2018,"author":[{"first_name":"Sven","last_name":"Tackenberg","full_name":"Tackenberg, Sven","id":"71470"},{"first_name":"Sönke","last_name":"Duckwitz","full_name":"Duckwitz, Sönke"},{"full_name":"Gamber, Thilo Gerhard","last_name":"Gamber","id":"71451","first_name":"Thilo Gerhard"}],"publication_status":"published","citation":{"chicago-de":"Tackenberg, Sven, Sönke Duckwitz und Thilo Gerhard Gamber. 2018. Robust Planning of the Provision of complex Services. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 271–281. Lemgo.","din1505-2-1":"Tackenberg, Sven ; Duckwitz, Sönke ; Gamber, Thilo Gerhard: Robust Planning of the Provision of complex Services. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2018, S. 271–281","short":"S. Tackenberg, S. Duckwitz, T.G. Gamber, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018, pp. 271–281.","chicago":"Tackenberg, Sven, Sönke Duckwitz, and Thilo Gerhard Gamber. “Robust Planning of the Provision of Complex Services.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 271–81. Lemgo, 2018.","apa":"Tackenberg, S., Duckwitz, S., & Gamber, T. G. (2018). Robust Planning of the Provision of complex Services. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 271–281). Lemgo.","ieee":"S. Tackenberg, S. Duckwitz, and T. G. Gamber, “Robust Planning of the Provision of complex Services,” in Production Engineering and Management, Lemgo, 2018, no. 1, pp. 271–281.","ufg":"Tackenberg, Sven et. al. (2018): Robust Planning of the Provision of complex Services, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 271–281.","mla":"Tackenberg, Sven, et al. “Robust Planning of the Provision of Complex Services.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 271–81.","havard":"S. Tackenberg, S. Duckwitz, T.G. Gamber, Robust Planning of the Provision of complex Services, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp. 271–281.","bjps":"Tackenberg S, Duckwitz S and Gamber TG (2018) Robust Planning of the Provision of Complex Services. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 271–281.","van":"Tackenberg S, Duckwitz S, Gamber TG. Robust Planning of the Provision of complex Services. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2018. p. 271–81.","ama":"Tackenberg S, Duckwitz S, Gamber TG. Robust Planning of the Provision of complex Services. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2018:271-281."},"title":"Robust Planning of the Provision of complex Services"},{"date_updated":"2023-03-15T13:49:59Z","related_material":{"link":[{"relation":"contains","url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf"}]},"user_id":"79260","type":"conference_editor_article","date_created":"2019-02-13T13:42:56Z","publication_identifier":{"isbn":["978-3-946856-03-0"]},"publication":"8th International Conference on Production Engineering and Management","_id":"549","language":[{"iso":"eng"}],"keyword":["Dissimilar metal joints","Laser processes","Multi-material components"],"place":"Lemgo","oa":"1","publication_status":"published","citation":{"chicago":"Springer, André, Sarah Nothdurft, Rabi Lahdo, and Oliver Seffer. Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. 8th International Conference on Production Engineering and Management. Lemgo: Technische Hochschule Ostwestfalen-Lippe, 2018.","ieee":"A. Springer, S. Nothdurft, R. Lahdo, and O. Seffer, Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. Lemgo: Technische Hochschule Ostwestfalen-Lippe, 2018.","apa":"Springer, A., Nothdurft, S., Lahdo, R., & Seffer, O. (2018). Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. 8th International Conference on Production Engineering and Management. Lemgo: Technische Hochschule Ostwestfalen-Lippe.","mla":"Springer, André, et al. “Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow.” 8th International Conference on Production Engineering and Management, Technische Hochschule Ostwestfalen-Lippe, 2018.","havard":"A. Springer, S. Nothdurft, R. Lahdo, O. Seffer, Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow, Technische Hochschule Ostwestfalen-Lippe, Lemgo, 2018.","bjps":"Springer A et al. (2018) Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. Lemgo: Technische Hochschule Ostwestfalen-Lippe.","ufg":"Springer, André et. al. (2018): Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow, Lemgo.","ama":"Springer A, Nothdurft S, Lahdo R, Seffer O. Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. Lemgo: Technische Hochschule Ostwestfalen-Lippe; 2018.","van":"Springer A, Nothdurft S, Lahdo R, Seffer O. Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. 8th International Conference on Production Engineering and Management. Lemgo: Technische Hochschule Ostwestfalen-Lippe; 2018.","chicago-de":"Springer, André, Sarah Nothdurft, Rabi Lahdo und Oliver Seffer. 2018. Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. 8th International Conference on Production Engineering and Management. Lemgo: Technische Hochschule Ostwestfalen-Lippe.","din1505-2-1":"Springer, André ; Nothdurft, Sarah ; Lahdo, Rabi ; Seffer, Oliver: Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. Lemgo : Technische Hochschule Ostwestfalen-Lippe, 2018","short":"A. Springer, S. Nothdurft, R. Lahdo, O. Seffer, Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow, Technische Hochschule Ostwestfalen-Lippe, Lemgo, 2018."},"title":"Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow","publisher":"Technische Hochschule Ostwestfalen-Lippe","status":"public","conference":{"location":"Lemgo","name":"8th International Conference","start_date":"2018-10-04","end_date":"2018-10-05"},"department":[{"_id":"DEP1306"},{"_id":"DEP7037"}],"author":[{"full_name":"Springer, André","first_name":"André","last_name":"Springer","id":"71733"},{"full_name":"Nothdurft, Sarah","first_name":"Sarah","last_name":"Nothdurft"},{"last_name":"Lahdo","first_name":"Rabi","full_name":"Lahdo, Rabi"},{"full_name":"Seffer, Oliver","last_name":"Seffer","first_name":"Oliver"}],"year":2018,"main_file_link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf","open_access":"1"}]},{"date_created":"2019-02-13T13:55:29Z","publication_identifier":{"isbn":["978-3-946856-03-0"]},"publication":"Production Engineering and Management","editor":[{"first_name":"Franz-Josef","full_name":"Villmer, Franz-Josef","last_name":"Villmer"},{"full_name":"Padoano, Elio","first_name":"Elio","last_name":"Padoano"}],"corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"date_updated":"2023-03-15T13:50:00Z","related_material":{"link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf","relation":"contains"}]},"oa":"1","language":[{"iso":"eng"}],"keyword":["Additive manufacturing","Process capability","Process monitoring","Quality assurance","Final part production"],"title":"Process Control for Selective Laser Melting - Opprtunities and Limitations","citation":{"chicago-de":"Huxol, Andrea und Franz-Josef Villmer. 2018. Process Control for Selective Laser Melting - Opprtunities and Limitations. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 17–28. Lemgo.","din1505-2-1":"Huxol, Andrea ; Villmer, Franz-Josef: Process Control for Selective Laser Melting - Opprtunities and Limitations. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2018, S. 17–28","short":"A. Huxol, F.-J. Villmer, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018, pp. 17–28.","chicago":"Huxol, Andrea, and Franz-Josef Villmer. “Process Control for Selective Laser Melting - Opprtunities and Limitations.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 17–28. Lemgo, 2018.","apa":"Huxol, A., & Villmer, F.-J. (2018). Process Control for Selective Laser Melting - Opprtunities and Limitations. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 17–28). Lemgo.","havard":"A. Huxol, F.-J. Villmer, Process Control for Selective Laser Melting - Opprtunities and Limitations, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp. 17–28.","bjps":"Huxol A and Villmer F-J (2018) Process Control for Selective Laser Melting - Opprtunities and Limitations. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 17–28.","mla":"Huxol, Andrea, and Franz-Josef Villmer. “Process Control for Selective Laser Melting - Opprtunities and Limitations.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 17–28.","ufg":"Huxol, Andrea/Villmer, Franz-Josef (2018): Process Control for Selective Laser Melting - Opprtunities and Limitations, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 17–28.","van":"Huxol A, Villmer F-J. Process Control for Selective Laser Melting - Opprtunities and Limitations. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2018. p. 17–28.","ieee":"A. Huxol and F.-J. Villmer, “Process Control for Selective Laser Melting - Opprtunities and Limitations,” in Production Engineering and Management, Lemgo, 2018, no. 1, pp. 17–28.","ama":"Huxol A, Villmer F-J. Process Control for Selective Laser Melting - Opprtunities and Limitations. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2018:17-28."},"year":2018,"author":[{"first_name":"Andrea","id":"43559","last_name":"Huxol","full_name":"Huxol, Andrea"},{"first_name":"Franz-Josef","last_name":"Villmer","id":"14290","full_name":"Villmer, Franz-Josef"}],"main_file_link":[{"open_access":"1","url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf"}],"page":"17-28","status":"public","type":"conference","user_id":"45673","_id":"550","place":"Lemgo","publication_status":"published","abstract":[{"text":"Additive Manufacturing (AM) technologies are increasingly used for final part production. Especially technologies for processing of metal, like Selective LaserMelting (SLM), arefocusedin this area. The shift from prototyping towards final part production results in enhanced requirements for repeatability and predictability of the part quality. Machine manufacturers offer process monitoring solutions for different aspects of the production process, like the powder bed surface, the melt pool, and the laser energy. Nevertheless, the significance of these systems is not fully proven and threshold values for the monitored process parameters have to be determined for each product individually. This impedes the development of suitable process control systems. The paper gives an overview ofexistingresearch approaches and available process monitoring systems for SLM and their applicability for predicting certain part characteristics. The existing solutions are evaluated based on own research results. Next, AM specific difficulties for the development of process control tools and possible solutions are discussed.","lang":"eng"}],"issue":"1","department":[{"_id":"DEP1306"}],"conference":{"end_date":"2018-10-05","start_date":"2018-10-04","name":"Proceedings 8th International Conference","location":"Lemgo"}},{"oa":"1","keyword":["PLM","ALM","Software engineering","V-model","Scrum"],"language":[{"iso":"eng"}],"publication":"Production Engineering and Management","publication_identifier":{"isbn":["978-3-946856-03-0"]},"date_created":"2019-02-13T14:03:03Z","corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"editor":[{"first_name":"Franz-Josef","full_name":"Villmer, Franz-Josef","last_name":"Villmer"},{"first_name":"Elio","full_name":"Padoano, Elio","last_name":"Padoano"}],"date_updated":"2023-03-15T13:50:00Z","related_material":{"link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf","relation":"contains"}]},"year":2018,"main_file_link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf","open_access":"1"}],"author":[{"id":"68780","last_name":"Heister","first_name":"Martin","full_name":"Heister, Martin"},{"first_name":"Andreas","full_name":"Deuter, Andreas","id":"62088","last_name":"Deuter"},{"first_name":"B.","full_name":"Schrader, B.","last_name":"Schrader"}],"status":"public","page":"31-41","title":"Design of an ALM-Based Process for Configuring PLM Systems","citation":{"ieee":"M. Heister, A. Deuter, and B. Schrader, “Design of an ALM-Based Process for Configuring PLM Systems,” in Production Engineering and Management, Lemgo, 2018, no. 1, pp. 31–41.","ama":"Heister M, Deuter A, Schrader B. Design of an ALM-Based Process for Configuring PLM Systems. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2018:31-41.","chicago":"Heister, Martin, Andreas Deuter, and B. Schrader. “Design of an ALM-Based Process for Configuring PLM Systems.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 31–41. Lemgo, 2018.","apa":"Heister, M., Deuter, A., & Schrader, B. (2018). Design of an ALM-Based Process for Configuring PLM Systems. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 31–41). Lemgo.","ufg":"Heister, Martin et. al. (2018): Design of an ALM-Based Process for Configuring PLM Systems, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 31–41.","bjps":"Heister M, Deuter A and Schrader B (2018) Design of an ALM-Based Process for Configuring PLM Systems. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 31–41.","havard":"M. Heister, A. Deuter, B. Schrader, Design of an ALM-Based Process for Configuring PLM Systems, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp. 31–41.","mla":"Heister, Martin, et al. “Design of an ALM-Based Process for Configuring PLM Systems.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 31–41.","van":"Heister M, Deuter A, Schrader B. Design of an ALM-Based Process for Configuring PLM Systems. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2018. p. 31–41.","din1505-2-1":"Heister, Martin ; Deuter, Andreas ; Schrader, B.: Design of an ALM-Based Process for Configuring PLM Systems. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2018, S. 31–41","chicago-de":"Heister, Martin, Andreas Deuter und B. Schrader. 2018. Design of an ALM-Based Process for Configuring PLM Systems. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 31–41. Lemgo.","short":"M. Heister, A. Deuter, B. Schrader, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018, pp. 31–41."},"_id":"551","place":"Lemgo","type":"conference","user_id":"62088","abstract":[{"lang":"eng","text":"Companies that use product lifecycle management (PLM) systems need to configure them individually. Such configuration is considered as a software development process. This article demonstrates how the software development process for PLM configuration can be improved by applying applicationlifecycle management (ALM) concepts. This paper explains how such a conceptdesigncan be created and implemented. The concept was evaluated in a real industrial case study. By this, it provides valuable insights useablefor any company, facing similar challenges as depicted in this paper."}],"issue":"1","department":[{"_id":"DEP1306"},{"_id":"DEP7022"}],"conference":{"name":"Proceedings 8th International Conference","location":"Lemgo","end_date":"2018-10-05","start_date":"2018-10-04"},"publication_status":"published"},{"oa":"1","keyword":["Additive manufacturing","Process parameters","Design of Experiments","Density measurement"],"language":[{"iso":"eng"}],"publication_identifier":{"isbn":["978-3-946856-03-0"]},"publication":"Production Engineering and Management","date_created":"2019-02-13T14:11:15Z","corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"editor":[{"last_name":"Villmer","first_name":"Franz-Josef","full_name":"Villmer, Franz-Josef"},{"first_name":"Elio","last_name":"Padoano","full_name":"Padoano, Elio"}],"date_updated":"2023-03-15T13:50:00Z","year":2018,"main_file_link":[{"open_access":"1","url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf"}],"author":[{"last_name":"Simoni","full_name":"Simoni, F.","first_name":"F."},{"full_name":"Huxol, Andrea","last_name":"Huxol","id":"43559","first_name":"Andrea"},{"first_name":"Franz-Josef","full_name":"Villmer, Franz-Josef","id":"14290","last_name":"Villmer"}],"status":"public","page":"43-55","title":"Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts","citation":{"van":"Simoni F, Huxol A, Villmer F-J. Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2018. p. 43–55.","ufg":"Simoni, F. et. al. (2018): Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 43–55.","mla":"Simoni, F., et al. “Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 43–55.","havard":"F. Simoni, A. Huxol, F.-J. Villmer, Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp. 43–55.","bjps":"Simoni F, Huxol A and Villmer F-J (2018) Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 43–55.","apa":"Simoni, F., Huxol, A., & Villmer, F.-J. (2018). Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 43–55). Lemgo.","chicago":"Simoni, F., Andrea Huxol, and Franz-Josef Villmer. “Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 43–55. Lemgo, 2018.","short":"F. Simoni, A. Huxol, F.-J. Villmer, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018, pp. 43–55.","chicago-de":"Simoni, F., Andrea Huxol und Franz-Josef Villmer. 2018. Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 43–55. Lemgo.","din1505-2-1":"Simoni, F. ; Huxol, Andrea ; Villmer, Franz-Josef: Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2018, S. 43–55","ama":"Simoni F, Huxol A, Villmer F-J. Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2018:43-55.","ieee":"F. Simoni, A. Huxol, and F.-J. Villmer, “Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts,” in Production Engineering and Management, Lemgo, 2018, no. 1, pp. 43–55."},"_id":"552","place":"Lemgo","type":"conference","user_id":"45673","abstract":[{"text":"Since additive manufacturing (AM) is continuously growing, the influence of processing conditions and setup parameters on microstructural and mechanical properties of additively manufacturedcomponents needs to be clarified. The paper discusses an experimental approach for the identification of influencing parameters in Selective Laser Melting; this consists of an evaluation of the mechanical and physical properties of final parts, depending on the chosen process parameters. The Design of Experiments is used to get valid results from a limited number of experiments. The research work focuses on the application of a Definitive Screening Design to identify the most important influencing parameters: Several parameters of the hatch and the contour exposure are varied, as well as the position and orientation of the samples in the build chamber. A maraging steel and a CoCr alloy are used, and the mechanical and physical properties of the samples are evaluated. The interdependencies between the variation of the factors and the observed properties are analyzed.","lang":"eng"}],"issue":"1","conference":{"name":"Proceedings 8th International Conference","location":"Lemgo","end_date":"2018-10-05","start_date":"2018-10-04"},"department":[{"_id":"DEP1306"}],"publication_status":"published"},{"page":"57-69","status":"public","author":[{"last_name":"Silva Gimenes Gandara","id":"70765","full_name":"Silva Gimenes Gandara, Joyce","first_name":"Joyce"},{"id":"43559","full_name":"Huxol, Andrea","first_name":"Andrea","last_name":"Huxol"},{"full_name":"Villmer, Franz-Josef","id":"14290","first_name":"Franz-Josef","last_name":"Villmer"}],"year":2018,"main_file_link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf","open_access":"1"}],"citation":{"apa":"Silva Gimenes Gandara, J., Huxol, A., & Villmer, F.-J. (2018). Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 57–69). Lemgo.","chicago":"Silva Gimenes Gandara, Joyce, Andrea Huxol, and Franz-Josef Villmer. “Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 57–69. Lemgo, 2018.","van":"Silva Gimenes Gandara J, Huxol A, Villmer F-J. Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2018. p. 57–69.","ufg":"Silva Gimenes Gandara, Joyce et. al. (2018): Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 57–69.","havard":"J. Silva Gimenes Gandara, A. Huxol, F.-J. Villmer, Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp. 57–69.","mla":"Silva Gimenes Gandara, Joyce, et al. “Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 57–69.","bjps":"Silva Gimenes Gandara J, Huxol A and Villmer F-J (2018) Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 57–69.","short":"J. Silva Gimenes Gandara, A. Huxol, F.-J. Villmer, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018, pp. 57–69.","din1505-2-1":"Silva Gimenes Gandara, Joyce ; Huxol, Andrea ; Villmer, Franz-Josef: Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2018, S. 57–69","chicago-de":"Silva Gimenes Gandara, Joyce, Andrea Huxol und Franz-Josef Villmer. 2018. Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 57–69. Lemgo.","ieee":"J. Silva Gimenes Gandara, A. Huxol, and F.-J. Villmer, “Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results,” in Production Engineering and Management, 2018, no. 1, pp. 57–69.","ama":"Silva Gimenes Gandara J, Huxol A, Villmer F-J. Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2018:57-69."},"title":"Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results","language":[{"iso":"eng"}],"keyword":["Additive manufacturing","Material properties","Part properties","Process parameters"],"oa":"1","editor":[{"first_name":"Franz-Josef","full_name":"Villmer, Franz-Josef","last_name":"Villmer"},{"full_name":"Padoano, Elio","first_name":"Elio","last_name":"Padoano"}],"corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"date_updated":"2023-03-15T13:50:00Z","related_material":{"link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf","relation":"contains"}]},"date_created":"2019-02-13T14:20:54Z","publication":"Production Engineering and Management","publication_identifier":{"isbn":["978-3-946856-03-0"]},"abstract":[{"lang":"eng","text":"Selective laser melting is a powder bed fusion technology that uses a laser as an energy source in order to directly build fullydensemetal parts. Optimal fabrication requires a comprehensiveunderstanding of the main processing,as it affectsthe part quality. Wherefore, the objective of this paper is to perform a survey, data checking and collecting ofprovided parameters to compare and contextualize it versus the respective values used in the processby the research studies. The work is focused on cobalt-chromium alloys (CoCr) which are widely used in dental and medical applications. This work focusesonsurfacequality and hardness as built and after the post-processes. As well, the approaches in bond strength after post-processing are considered, comparing the results made by different manufacturing techniques. Finally, this work compares results acquired in surface roughness asbuilt, and tensile strength of parts made by selective laser melting versus the traditional technique cast, before and after heat treatment."}],"issue":"1","department":[{"_id":"DEP1306"}],"conference":{"name":"Proceedings 8th International Conference","start_date":"2018-10-04","end_date":"2018-10-05"},"publication_status":"published","_id":"553","place":"Lemgo","user_id":"45673","type":"conference"},{"department":[{"_id":"DEP1306"},{"_id":"DEP5000"},{"_id":"DEP5020"},{"_id":"DEP6020"}],"conference":{"end_date":"2018-10-05","start_date":"2018-10-04","location":"Lemgo","name":"Proceedings 8th International Conference"},"abstract":[{"text":"Light guiding structures, like optical waveguides or fibers, take an important role in several industries, e.g. communication, sensing, illumination or medical applications. For the latter, it could be very interesting to have the possibility to manufacture problem-adapted structureswith a mechanicalfunctionality andwith additional embedded optical or electrical sensor functionalities.Modern additive manufacturing (AM) technologies like Stereolithography (SLA) or Fused Layer Modeling (FLM) may provide these opportunities.This paper is aimedto figure out the light guiding opportunities of both technologies. For this different kind of structures are built by FLM and SLA. To compare both manufacturing technologies, the layout of each structure is identical for both technologies. After manufacturing, the transmission and the attenuation of the guided light of these structures areanalyzed by measurement.Then the measurement results of the different technologies are compared with each other.","lang":"eng"}],"issue":"1","publication_status":"published","series_title":"Publication series in direct digital manufacturing","place":"Lemgo","_id":"554","user_id":"51864","type":"conference","page":"70-82","status":"public","year":"2018","author":[{"last_name":"Beyer","full_name":"Beyer, Micha","first_name":"Micha","id":"71403"},{"full_name":"Stübbe, Oliver","first_name":"Oliver","last_name":"Stübbe","id":"51864","orcid":"https://orcid.org/0000-0001-7293-6893"},{"full_name":"Villmer, Franz-Josef","id":"14290","last_name":"Villmer","first_name":"Franz-Josef"}],"citation":{"din1505-2-1":"Beyer, Micha ; Stübbe, Oliver ; Villmer, Franz-Josef: Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management ; Hochschule Ostwestfalen-Lippe (Hrsg.): Production engineering and management : proceedings 8th international conference, October 04 and 05, 2018, Lemgo, Germany, Publication series in direct digital manufacturing. Lemgo, 2018, S. 70–82","chicago-de":"Beyer, Micha, Oliver Stübbe und Franz-Josef Villmer. 2018. Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications. In: Production engineering and management : proceedings 8th international conference, October 04 and 05, 2018, Lemgo, Germany, hg. von Franz-Josef Villmer, Elio Padoano, Department of Production Engineering and Management, und Hochschule Ostwestfalen-Lippe, 70–82. Publication series in direct digital manufacturing. Lemgo.","short":"M. Beyer, O. Stübbe, F.-J. Villmer, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management : Proceedings 8th International Conference, October 04 and 05, 2018, Lemgo, Germany, Lemgo, 2018, pp. 70–82.","chicago":"Beyer, Micha, Oliver Stübbe, and Franz-Josef Villmer. “Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications.” In Production Engineering and Management : Proceedings 8th International Conference, October 04 and 05, 2018, Lemgo, Germany, edited by Franz-Josef Villmer, Elio Padoano, Department of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, 70–82. Publication Series in Direct Digital Manufacturing. Lemgo, 2018.","apa":"Beyer, M., Stübbe, O., & Villmer, F.-J. (2018). Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications. In F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe (Eds.), Production engineering and management : proceedings 8th international conference, October 04 and 05, 2018, Lemgo, Germany (Issue 1, pp. 70–82).","bjps":"Beyer M, Stübbe O and Villmer F-J (2018) Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications. In Villmer F-J et al. (eds), Production Engineering and Management : Proceedings 8th International Conference, October 04 and 05, 2018, Lemgo, Germany. Lemgo, pp. 70–82.","mla":"Beyer, Micha, et al. “Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications.” Production Engineering and Management : Proceedings 8th International Conference, October 04 and 05, 2018, Lemgo, Germany, edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 70–82.","havard":"M. Beyer, O. Stübbe, F.-J. Villmer, Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management : Proceedings 8th International Conference, October 04 and 05, 2018, Lemgo, Germany, Lemgo, 2018: pp. 70–82.","ufg":"Beyer, Micha/Stübbe, Oliver/Villmer, Franz-Josef: Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications, in: Villmer, Franz-Josef u. a. (Hgg.): Production engineering and management : proceedings 8th international conference, October 04 and 05, 2018, Lemgo, Germany, Lemgo 2018 (Publication series in direct digital manufacturing), S. 70–82.","van":"Beyer M, Stübbe O, Villmer FJ. Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications. In: Villmer FJ, Padoano E, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, editors. Production engineering and management : proceedings 8th international conference, October 04 and 05, 2018, Lemgo, Germany. Lemgo; 2018. p. 70–82. (Publication series in direct digital manufacturing).","ieee":"M. Beyer, O. Stübbe, and F.-J. Villmer, “Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications,” in Production engineering and management : proceedings 8th international conference, October 04 and 05, 2018, Lemgo, Germany, Lemgo, 2018, no. 1, pp. 70–82.","ama":"Beyer M, Stübbe O, Villmer FJ. Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications. In: Villmer FJ, Padoano E, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management : Proceedings 8th International Conference, October 04 and 05, 2018, Lemgo, Germany. Publication series in direct digital manufacturing. ; 2018:70-82."},"title":"Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications","language":[{"iso":"eng"}],"keyword":["Additive manufacturing","Embedded optical waveguides","Optical sensors","SLA technology","FLM technology"],"date_updated":"2024-04-19T12:56:30Z","editor":[{"first_name":"Franz-Josef","last_name":"Villmer","full_name":"Villmer, Franz-Josef"},{"full_name":"Padoano, Elio","first_name":"Elio","last_name":"Padoano"}],"corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"date_created":"2019-02-13T14:29:45Z","publication":"Production engineering and management : proceedings 8th international conference, October 04 and 05, 2018, Lemgo, Germany","publication_identifier":{"isbn":["978-3-946856-03-0"]}},{"keyword":["Block storage","Put-away","Blocks relocation","Block retrieval","Order picking","First in last out","First in first out","Pre-marshalling"],"language":[{"iso":"eng"}],"oa":"1","related_material":{"link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf","relation":"contains"}]},"date_updated":"2023-03-15T13:50:00Z","corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"editor":[{"last_name":"Villmer","first_name":"Franz-Josef","full_name":"Villmer, Franz-Josef"},{"full_name":"Padoano, Elio","first_name":"Elio","last_name":"Padoano"}],"publication_identifier":{"isbn":["978-3-946856-03-0"]},"date_created":"2019-02-13T15:12:26Z","status":"public","page":"101-112","main_file_link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf","open_access":"1"}],"author":[{"last_name":"Li","first_name":"Li","id":"58482","full_name":"Li, Li"}],"year":2018,"citation":{"short":"L. Li, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Lemgo, 2018, pp. 101–112.","chicago-de":"Li, Li. 2018. Put-Away and Retrieval Optimization Strategies towards Reduction of Blocks Relocations in a Block Storage. In: , hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 101–112. Lemgo.","din1505-2-1":"Li, Li: Put-Away and Retrieval Optimization Strategies towards Reduction of Blocks Relocations in a Block Storage. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): . Lemgo, 2018, S. 101–112","van":"Li L. Put-Away and Retrieval Optimization Strategies towards Reduction of Blocks Relocations in a Block Storage. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Lemgo; 2018. p. 101–12.","ama":"Li L. Put-Away and Retrieval Optimization Strategies towards Reduction of Blocks Relocations in a Block Storage. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Lemgo; 2018:101-112.","ufg":"Li, Li (2018): Put-Away and Retrieval Optimization Strategies towards Reduction of Blocks Relocations in a Block Storage, in: Franz-Josef Villmer et. al. (Hgg.): , Lemgo, S. 101–112.","havard":"L. Li, Put-Away and Retrieval Optimization Strategies towards Reduction of Blocks Relocations in a Block Storage, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Lemgo, 2018: pp. 101–112.","mla":"Li, Li. Put-Away and Retrieval Optimization Strategies towards Reduction of Blocks Relocations in a Block Storage. Edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 101–12.","bjps":"Li L (2018) Put-Away and Retrieval Optimization Strategies towards Reduction of Blocks Relocations in a Block Storage. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds). Lemgo, pp. 101–112.","apa":"Li, L. (2018). Put-Away and Retrieval Optimization Strategies towards Reduction of Blocks Relocations in a Block Storage. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.) (pp. 101–112). Presented at the Proceedings 8th International Conference, Lemgo.","ieee":"L. Li, “Put-Away and Retrieval Optimization Strategies towards Reduction of Blocks Relocations in a Block Storage,” presented at the Proceedings 8th International Conference, Lemgo, 2018, no. 1, pp. 101–112.","chicago":"Li, Li. “Put-Away and Retrieval Optimization Strategies towards Reduction of Blocks Relocations in a Block Storage.” edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 101–12. Lemgo, 2018."},"title":"Put-Away and Retrieval Optimization Strategies towards Reduction of Blocks Relocations in a Block Storage","place":"Lemgo","_id":"555","user_id":"45673","type":"conference","department":[{"_id":"DEP7000"},{"_id":"DEP1306"}],"conference":{"name":"Proceedings 8th International Conference","location":"Lemgo","start_date":"2019-10-04","end_date":"2019-10-05"},"issue":"1","abstract":[{"text":"Although it is recommended to store goods in a warehouse based on the principle of first in first out, it is still unavoidable to use block storage of storing, for example, long andbulky goods. If the major advantage of block storage in area saving is themost important, the companyhas to accept the removal principle of last in first out or in other words, first in last out. The last goods to be stocked are the first goods to be removed and the first stocked goods are the last to be removed. There are some special observations in the block storage concerned in this paper. The first one is that the goods in the storage ordered by the customers can often not be removed directly from the storage without any stock movement. Theaim is to not only benefit fromthe high-density storage solution but also decrease the negative influence of block storage, especially when pre-stocked goods must be removed at first. The second observation is that during one concerned time period, forexample, one day, there may be several operations of put-away and several operations of order picking for shipment preparation. The third observation is that before goods are put away to storage, which goods to be removed are not always predictable. The preplanned removal dates are quite often unexpected changed. In this paper, scenarios with different dynamic properties and stochastic probabilities have been concerned and defined. Strategies for the three main stages of put-away, i.e. stacking, pre-marshalingand retrieval are defined and examined developed. Simulations have been conducted to examine the strategies based on different scenarios. The aimis to select the right strategy which may reduce the overall relocation operations. It is expected that the sum of blocks movement during put-away i.e. stacking, pre-marshaling, and block retrieval is optimally minimized.","lang":"eng"}],"publication_status":"published"},{"user_id":"74004","type":"conference","place":"Lemgo","_id":"557","publication_status":"published","conference":{"name":"Proceedings 8th International Conference","location":"Lemgo","start_date":"2018-10-04","end_date":"2018-10-05"},"department":[{"_id":"DEP7020"},{"_id":"DEP1306"}],"abstract":[{"lang":"eng","text":"Current processes for designing manual assembly workstations do not consider the need for employee-appropriate, product-specific and operating resources-specific factors. A systematic design tool would help to minimize cycle times, increase productivity and improve ergonomic criteria. Therefore, a literature research concerning workplace design for manual assembly was conducted. Additionally, a guided Interview and a questionnaire were developed and approached on the trade show “Motek” with 14 participants.The study shows evidence for the assumption that there is no systematic approach todesigning manual assembly workstations."}],"issue":"1","date_updated":"2023-03-15T13:50:00Z","editor":[{"first_name":"Franz-Josef","last_name":"Villmer","full_name":"Villmer, Franz-Josef"},{"first_name":"Elio","last_name":"Padoano","full_name":"Padoano, Elio"}],"corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"date_created":"2019-02-13T15:28:52Z","publication_identifier":{"isbn":["978-3-946856-03-0"]},"publication":"Production Engineering and Management","language":[{"iso":"eng"}],"keyword":["Manual assembly","Workplace design","Ergonomic workstations","SME"],"citation":{"chicago":"Gote, Henning, and Thomas Glatzel. “Empirical Study of Workplace Design of Manual Assembly Workstations in SME.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 137–48. Lemgo, 2018.","apa":"Gote, H., & Glatzel, T. (2018). Empirical Study of Workplace Design of Manual Assembly Workstations in SME. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 137–148). Lemgo.","ufg":"Gote, Henning/Glatzel, Thomas (2018): Empirical Study of Workplace Design of Manual Assembly Workstations in SME, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 137–148.","havard":"H. Gote, T. Glatzel, Empirical Study of Workplace Design of Manual Assembly Workstations in SME, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp. 137–148.","mla":"Gote, Henning, and Thomas Glatzel. “Empirical Study of Workplace Design of Manual Assembly Workstations in SME.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 137–48.","bjps":"Gote H and Glatzel T (2018) Empirical Study of Workplace Design of Manual Assembly Workstations in SME. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 137–148.","van":"Gote H, Glatzel T. Empirical Study of Workplace Design of Manual Assembly Workstations in SME. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2018. p. 137–48.","din1505-2-1":"Gote, Henning ; Glatzel, Thomas: Empirical Study of Workplace Design of Manual Assembly Workstations in SME. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2018, S. 137–148","chicago-de":"Gote, Henning und Thomas Glatzel. 2018. Empirical Study of Workplace Design of Manual Assembly Workstations in SME. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 137–148. Lemgo.","short":"H. Gote, T. Glatzel, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018, pp. 137–148.","ieee":"H. Gote and T. Glatzel, “Empirical Study of Workplace Design of Manual Assembly Workstations in SME,” in Production Engineering and Management, Lemgo, 2018, no. 1, pp. 137–148.","ama":"Gote H, Glatzel T. Empirical Study of Workplace Design of Manual Assembly Workstations in SME. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2018:137-148."},"title":"Empirical Study of Workplace Design of Manual Assembly Workstations in SME","page":"137-148","status":"public","year":2018,"author":[{"id":"64558","last_name":"Gote","full_name":"Gote, Henning","first_name":"Henning"},{"last_name":"Glatzel","full_name":"Glatzel, Thomas","id":"64888","first_name":"Thomas"}]},{"issue":"1","abstract":[{"lang":"eng","text":"The navigation technique has been always an important issue for guiding an automated guided vehicle (AGV). With the development of sensor technology, software engineering, andalgorithms, there is a spectrum of different navigation methods for AGVs. Inorder to avoid the additional environmental installation,so as to increase the flexibility of route planning, but to keep the positioning precision, more sensors, such as light detection and ranging (LIDAR), wheel encoders and gyroscope are installed on the vehicles to be automated. Some intelligent algorithms such as simultaneous localization and mapping (SLAM) algorithms and Monte Carlo localization have been developed for the navigation of vehicles, including position and orientation. The interesting question, especially for the AGVmanufacturers, is: which algorithm is more suitable for which kind of applications. The suitabilityof an algorithm for the navigation of AGVs with facilities of Light Detection and Ranging(LIDAR), encoders and gyroscope ismainly determined by four properties. They are the positioning precision, computational costs, execution time and positioning repeatability. This paper intends to investigate the suitability of an algorithm or a navigation method for AGVs with LIDAR, wheel encoders,and gyroscope. The two aspects of positioningaccuracy and repeatability are especially concerned. A general comparison of different navigation methods and algorithms is given. An experimental platform with a basic vehicle, controlling system and sensors is then developed to further evaluate the algorithms. The hardware components and software components are compatible to robot operating system (ROS). This open-source robotics middleware provides services and tools for creating robot applications. As ROS SLAM nodes, open-source SLAM algorithms can be evaluated relatively easily without any rewriting or modification of the algorithms. As a new research field, there is not jet a SLAM algorithm, which is predominant absolutely."}],"department":[{"_id":"DEP7000"},{"_id":"DEP1306"}],"conference":{"start_date":"2018-10-04","end_date":"2018-10-05","location":"Lemgo","name":"Proceedings 8th International Conference"},"publication_status":"published","_id":"559","place":"Lemgo","type":"conference","user_id":"45673","main_file_link":[{"open_access":"1","url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf"}],"author":[{"full_name":"Li, Li","last_name":"Li","first_name":"Li","id":"58482"},{"full_name":"Schulze, L.","first_name":"L.","last_name":"Schulze"}],"year":2018,"page":"213-223","status":"public","title":"Comparison and Evaluation of SLAM Algorithms for AGV Navigation","citation":{"chicago-de":"Li, Li und L. Schulze. 2018. Comparison and Evaluation of SLAM Algorithms for AGV Navigation. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 213–223. Lemgo.","din1505-2-1":"Li, Li ; Schulze, L.: Comparison and Evaluation of SLAM Algorithms for AGV Navigation. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2018, S. 213–223","short":"L. Li, L. Schulze, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018, pp. 213–223.","bjps":"Li L and Schulze L (2018) Comparison and Evaluation of SLAM Algorithms for AGV Navigation. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 213–223.","mla":"Li, Li, and L. Schulze. “Comparison and Evaluation of SLAM Algorithms for AGV Navigation.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 213–23.","havard":"L. Li, L. Schulze, Comparison and Evaluation of SLAM Algorithms for AGV Navigation, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp. 213–223.","ufg":"Li, Li/Schulze, L. (2018): Comparison and Evaluation of SLAM Algorithms for AGV Navigation, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 213–223.","van":"Li L, Schulze L. Comparison and Evaluation of SLAM Algorithms for AGV Navigation. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2018. p. 213–23.","chicago":"Li, Li, and L. Schulze. “Comparison and Evaluation of SLAM Algorithms for AGV Navigation.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 213–23. Lemgo, 2018.","apa":"Li, L., & Schulze, L. (2018). Comparison and Evaluation of SLAM Algorithms for AGV Navigation. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 213–223). Lemgo.","ama":"Li L, Schulze L. Comparison and Evaluation of SLAM Algorithms for AGV Navigation. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2018:213-223.","ieee":"L. Li and L. Schulze, “Comparison and Evaluation of SLAM Algorithms for AGV Navigation,” in Production Engineering and Management, Lemgo, 2018, no. 1, pp. 213–223."},"oa":"1","language":[{"iso":"eng"}],"keyword":["Automatedguided vehicle","Simultaneous localization and mapping","Robot operating system","Light detection and ranging"],"date_created":"2019-02-13T15:56:30Z","publication_identifier":{"isbn":["978-3-946856-03-0"]},"publication":"Production Engineering and Management","editor":[{"first_name":"Franz-Josef","last_name":"Villmer","full_name":"Villmer, Franz-Josef"},{"full_name":"Padoano, Elio","first_name":"Elio","last_name":"Padoano"}],"corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"date_updated":"2023-03-15T13:50:00Z"},{"type":"conference","user_id":"45673","place":"Lemgo","_id":"560","publication_status":"published","department":[{"_id":"DEP7000"},{"_id":"DEP1306"}],"conference":{"location":"Lemgo","name":"Proceedings 8th International Conference","start_date":"2018-10-04","end_date":"2018-10-05"},"issue":"1","abstract":[{"text":"In warehouse planning and dimensioning, many parameters and conditions have to be met and goals must be fulfilled, e.g. labor and investment costs, desired throughput and capacity, available material handling technologies and size constraints. These factors determine the ultimate choice of a particular alternative from a wide range of solution alternatives.On the one hand, the warehouse planning process is very complex and takes into account all different aspects of decision-making. On the other hand, it is expected that the planning period is shorter and shorter. To balance out the competing interests of accuracy and time, it is a promising approach to make use of computer-based planning tools. They can be used to find the most cost-efficientalternative and to visualize its layout.In addition, at the end of the planning process not only technologies and layout dimensions are specified, the warehouse layout with the rack configuration, the conveyors and the buildings should be visualized in three dimensions.It is a promising approach to integrate the detailed layout drawing through computer-aideddesign tools such as AutoCAD Inventor into warehouse planning process. Softwareis developed for detailed warehouse planning. The core modules of the software can generate a favorable warehouse alternative and an AutoCAD-Add-On for the visualization of the outcomes.With the planning tool,the planning period can be significantly shortened while simultaneously the planning quality, especially during the period of rough planning, increases.To balance out the competing interests of accuracy and time, it is a promising approach to make use ofcomputer-basedplanning tools. They can be used to find the most cost-efficientalternative and to visualize its layout.","lang":"eng"}],"publication_identifier":{"isbn":["978-3-946856-03-0"]},"publication":"Production Engineering and Management","date_created":"2019-02-13T16:05:34Z","date_updated":"2023-03-15T13:50:00Z","related_material":{"link":[{"relation":"contains","url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf"}]},"corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"editor":[{"first_name":"Franz-Josef","last_name":"Villmer","full_name":"Villmer, Franz-Josef"},{"full_name":"Padoano, Elio","first_name":"Elio","last_name":"Padoano"}],"oa":"1","keyword":["Warehouse planning","Layout configuration","Labor and investment costs"],"language":[{"iso":"eng"}],"title":"Digitized Planning with Visualization for Warehouse Layouts","citation":{"short":"L. Schulze, L. Li, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018, pp. 233–242.","chicago-de":"Schulze, L. und Li Li. 2018. Digitized Planning with Visualization for Warehouse Layouts. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 233–242. Lemgo.","din1505-2-1":"Schulze, L. ; Li, Li: Digitized Planning with Visualization for Warehouse Layouts. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2018, S. 233–242","ieee":"L. Schulze and L. Li, “Digitized Planning with Visualization for Warehouse Layouts,” in Production Engineering and Management, Lemgo, 2018, no. 1, pp. 233–242.","apa":"Schulze, L., & Li, L. (2018). Digitized Planning with Visualization for Warehouse Layouts. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 233–242). Lemgo.","chicago":"Schulze, L., and Li Li. “Digitized Planning with Visualization for Warehouse Layouts.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 233–42. Lemgo, 2018.","ama":"Schulze L, Li L. Digitized Planning with Visualization for Warehouse Layouts. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2018:233-242.","van":"Schulze L, Li L. Digitized Planning with Visualization for Warehouse Layouts. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2018. p. 233–42.","havard":"L. Schulze, L. Li, Digitized Planning with Visualization for Warehouse Layouts, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp. 233–242.","bjps":"Schulze L and Li L (2018) Digitized Planning with Visualization for Warehouse Layouts. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 233–242.","mla":"Schulze, L., and Li Li. “Digitized Planning with Visualization for Warehouse Layouts.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 233–42.","ufg":"Schulze, L./Li, Li (2018): Digitized Planning with Visualization for Warehouse Layouts, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 233–242."},"year":2018,"author":[{"full_name":"Schulze, L.","last_name":"Schulze","first_name":"L."},{"first_name":"Li","full_name":"Li, Li","id":"58482","last_name":"Li"}],"main_file_link":[{"open_access":"1","url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf"}],"status":"public","page":"233-242"},{"citation":{"ieee":"T. Glatzel and S. Tackenberg, “Smart Production - A Paradigm-Shift in the Field of Maintenance,” in Production Engineering and Management, Lemgo, 2018, no. 1, pp. 245–255.","ama":"Glatzel T, Tackenberg S. Smart Production - A Paradigm-Shift in the Field of Maintenance. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2018:245-255.","apa":"Glatzel, T., & Tackenberg, S. (2018). Smart Production - A Paradigm-Shift in the Field of Maintenance. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 245–255). Lemgo.","chicago":"Glatzel, Thomas, and Sven Tackenberg. “Smart Production - A Paradigm-Shift in the Field of Maintenance.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 245–55. Lemgo, 2018.","van":"Glatzel T, Tackenberg S. Smart Production - A Paradigm-Shift in the Field of Maintenance. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2018. p. 245–55.","ufg":"Glatzel, Thomas/Tackenberg, Sven (2018): Smart Production - A Paradigm-Shift in the Field of Maintenance, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 245–255.","bjps":"Glatzel T and Tackenberg S (2018) Smart Production - A Paradigm-Shift in the Field of Maintenance. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 245–255.","mla":"Glatzel, Thomas, and Sven Tackenberg. “Smart Production - A Paradigm-Shift in the Field of Maintenance.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 245–55.","havard":"T. Glatzel, S. Tackenberg, Smart Production - A Paradigm-Shift in the Field of Maintenance, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp. 245–255.","short":"T. Glatzel, S. Tackenberg, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018, pp. 245–255.","din1505-2-1":"Glatzel, Thomas ; Tackenberg, Sven: Smart Production - A Paradigm-Shift in the Field of Maintenance. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2018, S. 245–255","chicago-de":"Glatzel, Thomas und Sven Tackenberg. 2018. Smart Production - A Paradigm-Shift in the Field of Maintenance. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 245–255. Lemgo."},"title":"Smart Production - A Paradigm-Shift in the Field of Maintenance","status":"public","page":"245-255","author":[{"first_name":"Thomas","last_name":"Glatzel","id":"64888","full_name":"Glatzel, Thomas"},{"id":"71470","first_name":"Sven","full_name":"Tackenberg, Sven","last_name":"Tackenberg"}],"year":2018,"date_updated":"2023-03-15T13:50:00Z","corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"editor":[{"full_name":"Villmer, Franz-Josef","last_name":"Villmer","first_name":"Franz-Josef"},{"first_name":"Elio","full_name":"Padoano, Elio","last_name":"Padoano"}],"publication":"Production Engineering and Management","publication_identifier":{"isbn":["978-3-946856-03-0"]},"date_created":"2019-02-13T16:11:29Z","keyword":["Maintenance 4.0","Smart production","Maintenance check","Maintenance maturity"],"language":[{"iso":"eng"}],"publication_status":"published","department":[{"_id":"DEP7020"},{"_id":"DEP1305"}],"conference":{"start_date":"2018-10-04","end_date":"2018-10-05","location":"Lemgo","name":"Proceedings 8th International Conference"},"abstract":[{"text":"A paradigm shift in the field of maintenance is essential for companies due to a progressive digitalization of production processes. Therefore, the new paradigm considersall phases of a system, from procurement, operation through to the recycling of the machine. Initially, at the start of the cycle manufacturers of machines and equipment have to focus on design, implementation and quality assurance in compliance with the requirements for operation and maintenance to minimize lifecycle cost. During operation,an efficient strategy for maintaining must be defined. Based on the introduced paradigm a maintenance check is presented, able to provide orientation to small and middle-sizedenterprises regarding their maintenance situation and level. The respective level is described on basis of the degree of maturity. Regarding further steps, it is the fundament for strategic decisions and activities.","lang":"eng"}],"issue":"1","user_id":"74004","type":"conference","place":"Lemgo","_id":"561"},{"file_date_updated":"2018-12-04T15:35:27Z","editor":[{"id":"14290","first_name":"Franz-Josef","full_name":"Villmer, Franz-Josef","last_name":"Villmer"},{"last_name":"Padoano","first_name":"Elio","full_name":"Padoano, Elio"}],"corporate_editor":[" Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"date_updated":"2023-03-15T13:49:44Z","date_created":"2018-12-04T15:44:29Z","publication_identifier":{"isbn":["978-3-946856-03-0"]},"language":[{"iso":"eng"}],"oa":"1","citation":{"short":"F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, eds., Production Engineering and Management, Lemgo, 2018.","chicago-de":"Villmer, Franz-Josef, Elio Padoano und Department of Production Engineering and Management, Hrsg. 2018. Production Engineering and Management. Schriftenreihe Logistik. Lemgo.","din1505-2-1":"Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management, Schriftenreihe Logistik. Lemgo, 2018","apa":"Villmer, F.-J., Padoano, E., & Department of Production Engineering and Management (Eds.). (2018). Production Engineering and Management (p. 306). Presented at the 8th International Conference, Lemgo.","chicago":"Villmer, Franz-Josef, Elio Padoano, and Department of Production Engineering and Management, eds. Production Engineering and Management. Schriftenreihe Logistik. Lemgo, 2018.","van":"Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2018. (Schriftenreihe Logistik).","ufg":"Villmer, Franz-Josef et. al. (Hgg.) (2018): Production Engineering and Management (=Schriftenreihe Logistik), Lemgo.","bjps":"Villmer F-J, Padoano E and Department of Production Engineering and Management (eds) (2018) Production Engineering and Management. Lemgo.","havard":"F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, eds., Production Engineering and Management, Lemgo, 2018.","mla":"Villmer, Franz-Josef, et al., editors. Production Engineering and Management. no. ., 2018, p. 306.","ieee":"F.-J. Villmer, E. Padoano, and Department of Production Engineering and Management, Eds., Production Engineering and Management, no. . Lemgo, 2018, p. 306.","ama":"Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2018:306."},"title":"Production Engineering and Management","page":"306","status":"public","year":2018,"user_id":"68554","type":"conference_editor","_id":"305","place":"Lemgo","has_accepted_license":"1","file":[{"relation":"main_file","creator":"hka-zn8","date_updated":"2018-12-04T15:35:27Z","file_id":"306","file_size":11343767,"file_name":"PEM2018_proceedings_web.pdf","content_type":"application/pdf","date_created":"2018-12-04T15:35:27Z","access_level":"open_access","success":1}],"publication_status":"published","series_title":"Schriftenreihe Logistik","abstract":[{"text":"It is our pleasure to introduce the 8th edition of the International Conference on Production Engineering and anagement (PEM), an event that is the result of the joint effort of the OWL University of Applied Sciences and the University of Trieste. The conference has been established as an annual meeting under the Double Degree Master Program “Production Engineering and Management” by the two partner universities. This year the conference is hosted at the university campus in Lemgo, Germany. \r\n\r\nThe main goal of the conference is to offer students, researchers and professionals in Germany, Italy and abroad, an opportunity to meet and exchange information, discuss experiences, specific practices and technical solutions for planning, design, and management of manufacturing and service systems and processes. As always, the conference is a platform aimed at presenting research projects, introducing young academics to the tradition of symposiums and promoting the exchange of ideas between the industry and the academy. \r\n\r\nThis year’s special focus is on Supply Chain Design and Management in the context of Industry 4.0, which are currently major topics of discussion among experts and professionals. In fact, the features and problems of Industry 4.0 have been widely discussed in the last editions of the PEM conference, in which sustainability and efficiency also emerged as key factors. With the further study and development of Direct Digital Manufacturing \r\ntechnologies in connection with new Management Practices and Supply Chain Designs, the 8th edition of the PEM conference aims to offer new and interesting scientific contributions.\r\n\r\nThe conference program includes 25 speeches organized in seven sessions. Two are specifically dedicated to “Direct Digital Manufacturing in the context of Industry 4.0”. The other sessions are covering areas of great interest and importance to the participants of the conference, which are related to the main focus: “Supply Chai n Design and Management”, “Industrial Engineering and Lean Management”, “Wood Processing Technologies and Furniture Production”, and “Management Practices and Methodologies”. The proceedings of the conference include the articles submitted and accepted after a careful double-blind refereeing process.","lang":"eng"}],"issue":".","conference":{"name":"8th International Conference","location":"Lemgo","start_date":"2018-10-04","end_date":"2018-10-05"},"department":[{"_id":"DEP1306"}],"ddc":["650"]},{"language":[{"iso":"eng"}],"place":"Lemgo","_id":"3495","date_updated":"2023-03-15T13:49:47Z","user_id":"74004","editor":[{"last_name":"Villmer","first_name":"Franz-Josef","full_name":"Villmer, Franz-Josef"},{"last_name":"Padoano","full_name":"Padoano, Elio","first_name":"Elio"}],"date_created":"2020-09-15T08:40:02Z","type":"conference","publication_identifier":{"isbn":["978-3-946856-03-0"]},"publication":"Production Engineering and Management. Proceedings 8th International Conference","page":"147 - 158","status":"public","publisher":"Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft","conference":{"start_date":"2018-10-04","end_date":"2018-10-05","name":"Production Engineering and Management. Proceedings 8th International Conference","location":"Lemgo"},"department":[{"_id":"DEP7020"}],"year":2018,"author":[{"last_name":"Jungkind","first_name":"Wilfried","id":"14059","full_name":"Jungkind, Wilfried"},{"last_name":"Dobrzanski","first_name":"P.","full_name":"Dobrzanski, P."}],"main_file_link":[{"url":"http://www.th-owl.de/fb7/fileadmin/download/labore/industrialengineering/pdf/Veroeffentlichungen/PEM_2014_Informal_Structures_in_Change_Projects_-_A_Hands-On_Example.pdf"}],"ddc":["330"],"publication_status":"published","citation":{"ieee":"W. Jungkind and P. Dobrzanski, “Human resources and organizational development in the context of industry 4.0.,” in Production Engineering and Management. Proceedings 8th International Conference, Lemgo, 2018, pp. 147–158.","apa":"Jungkind, W., & Dobrzanski, P. (2018). Human resources and organizational development in the context of industry 4.0. In F.-J. Villmer & E. Padoano (Eds.), Production Engineering and Management. Proceedings 8th International Conference (pp. 147–158). Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft.","chicago":"Jungkind, Wilfried, and P. Dobrzanski. “Human Resources and Organizational Development in the Context of Industry 4.0.” In Production Engineering and Management. Proceedings 8th International Conference, edited by Franz-Josef Villmer and Elio Padoano, 147–58. Schriftenreihe Logistik. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft, 2018.","ama":"Jungkind W, Dobrzanski P. Human resources and organizational development in the context of industry 4.0. In: Villmer F-J, Padoano E, eds. Production Engineering and Management. Proceedings 8th International Conference. Schriftenreihe Logistik. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft; 2018:147-158.","van":"Jungkind W, Dobrzanski P. Human resources and organizational development in the context of industry 4.0. In: Villmer F-J, Padoano E, editors. Production Engineering and Management Proceedings 8th International Conference. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft; 2018. p. 147–58. (Schriftenreihe Logistik).","bjps":"Jungkind W and Dobrzanski P (2018) Human Resources and Organizational Development in the Context of Industry 4.0. In Villmer F-J and Padoano E (eds), Production Engineering and Management. Proceedings 8th International Conference. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft, pp. 147–158.","havard":"W. Jungkind, P. Dobrzanski, Human resources and organizational development in the context of industry 4.0., in: F.-J. Villmer, E. Padoano (Eds.), Production Engineering and Management. Proceedings 8th International Conference, Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft, Lemgo, 2018: pp. 147–158.","mla":"Jungkind, Wilfried, and P. Dobrzanski. “Human Resources and Organizational Development in the Context of Industry 4.0.” Production Engineering and Management. Proceedings 8th International Conference, edited by Franz-Josef Villmer and Elio Padoano, Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft, 2018, pp. 147–58.","ufg":"Jungkind, Wilfried/Dobrzanski, P. (2018): Human resources and organizational development in the context of industry 4.0., in: Franz-Josef Villmer/Elio Padoano (Hgg.): Production Engineering and Management. Proceedings 8th International Conference (=Schriftenreihe Logistik), Lemgo, S. 147–158.","short":"W. Jungkind, P. Dobrzanski, in: F.-J. Villmer, E. Padoano (Eds.), Production Engineering and Management. Proceedings 8th International Conference, Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft, Lemgo, 2018, pp. 147–158.","chicago-de":"Jungkind, Wilfried und P. Dobrzanski. 2018. Human resources and organizational development in the context of industry 4.0. In: Production Engineering and Management. Proceedings 8th International Conference, hg. von Franz-Josef Villmer und Elio Padoano, 147–158. Schriftenreihe Logistik. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft.","din1505-2-1":"Jungkind, Wilfried ; Dobrzanski, P.: Human resources and organizational development in the context of industry 4.0. In: Villmer, F.-J. ; Padoano, E. (Hrsg.): Production Engineering and Management. Proceedings 8th International Conference, Schriftenreihe Logistik. Lemgo : Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft, 2018, S. 147–158"},"series_title":"Schriftenreihe Logistik","title":"Human resources and organizational development in the context of industry 4.0."}]