---
_id: '238'
abstract:
- lang: eng
text: "In future, advancing digitalization will entail extensive change for businesses.
To date, there are only sporadically implemented examples of Smart Factories and
these are rather technically (specifically information technology) oriented. Phoenix
Contact therefore decided to use a tailor-made approach to implement the digital
transition towards becoming a Smart Factory. With the participation of the senior
management affected, other internal support areas and the works council, an image
of the future for the Smart Factory was developed. Based on the main future processes
the appropriate organizational structure was selected and all participants could
now be trained in the performance of new tasks. In addition, this allows for technological
concepts to be chosen and judiciously incorporated in further stages. In this
paper, the “SmartOrg@Combicon” project will be illustrated as the initial phase
in the course of Smart Factory implementation.\r\n"
author:
- first_name: P.
full_name: Dobrzanski, P.
last_name: Dobrzanski
- first_name: Wilfried
full_name: Jungkind, Wilfried
id: '14059'
last_name: Jungkind
citation:
ama: 'Dobrzanski P, Jungkind W. Human Resources and Organizational Development in
the Context of Industry 4.0. In: Villmer F-J, Padoano E, Department of Production
Engineering and Management, eds. Production Engineering and Management.
Lemgo; 2018:147-158.'
apa: Dobrzanski, P., & Jungkind, W. (2018). Human Resources and Organizational
Development in the Context of Industry 4.0. In F.-J. Villmer, E. Padoano, &
Department of Production Engineering and Management (Eds.), Production engineering
and management (pp. 147–158). Lemgo.
bjps: Dobrzanski P and Jungkind W (2018) Human Resources and Organizational
Development in the Context of Industry 4.0. In Villmer F-J, Padoano E and Department
of Production Engineering and Management (eds), Production Engineering and
Management. Lemgo, pp. 147–158.
chicago: Dobrzanski, P., and Wilfried Jungkind. “Human Resources and Organizational
Development in the Context of Industry 4.0.” In Production Engineering and
Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of
Production Engineering and Management, 147–58. Lemgo, 2018.
chicago-de: 'Dobrzanski, P. und Wilfried Jungkind. 2018. Human Resources and Organizational
Development in the Context of Industry 4.0. In: Production engineering and
management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production
Engineering and Management, 147–158. Lemgo.'
din1505-2-1: 'Dobrzanski, P. ; Jungkind, Wilfried: Human Resources and
Organizational Development in the Context of Industry 4.0. In: Villmer,
F.-J. ; Padoano, E. ; Department of Production Engineering and Management
(Hrsg.): Production engineering and management. Lemgo, 2018, S. 147–158'
havard: 'P. Dobrzanski, W. Jungkind, Human Resources and Organizational Development
in the Context of Industry 4.0, in: F.-J. Villmer, E. Padoano, Department of Production
Engineering and Management (Eds.), Production Engineering and Management, Lemgo,
2018: pp. 147–158.'
ieee: P. Dobrzanski and W. Jungkind, “Human Resources and Organizational Development
in the Context of Industry 4.0,” in Production engineering and management,
Lemgo, 2018, no. 1, pp. 147–158.
mla: Dobrzanski, P., and Wilfried Jungkind. “Human Resources and Organizational
Development in the Context of Industry 4.0.” Production Engineering and Management,
edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 147–58.
short: 'P. Dobrzanski, W. Jungkind, in: F.-J. Villmer, E. Padoano, Department of
Production Engineering and Management (Eds.), Production Engineering and Management,
Lemgo, 2018, pp. 147–158.'
ufg: 'Dobrzanski, P./Jungkind, Wilfried (2018): Human Resources and Organizational
Development in the Context of Industry 4.0, in: Franz-Josef Villmer et. al. (Hgg.):
Production engineering and management, Lemgo, S. 147–158.'
van: 'Dobrzanski P, Jungkind W. Human Resources and Organizational Development in
the Context of Industry 4.0. In: Villmer F-J, Padoano E, Department of Production
Engineering and Management, editors. Production engineering and management. Lemgo;
2018. p. 147–58.'
conference:
end_date: 2018-10-05
location: Lemgo
name: Proceedings 8 th International Conference
start_date: 2018-10-04
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2018-11-16T12:12:37Z
date_updated: 2023-03-15T13:49:39Z
department:
- _id: DEP7020
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
issue: '1'
keyword:
- Industry 4.0
- Smart Factory
- Digital transformation
- Staff and organizational development
language:
- iso: eng
page: 147-158
place: Lemgo
publication: Production engineering and management
publication_identifier:
isbn:
- 978-3-946856-03-0
publication_status: published
status: public
title: Human Resources and Organizational Development in the Context of Industry 4.0
type: conference
user_id: '74004'
year: 2018
...
---
_id: '686'
abstract:
- lang: eng
text: A high level of productivity for current and future services is a critical
success factor for companies. When the productivity of services is unknown or
incorrect, resources are wasted and opportunities are missed. To respond to this
challenge, a simulation modelfor the prospective description of a complex service
provision was developed in order to support companies to create a robust offering
of services.Focusing on the domain of factory planning, we illustrate howan extended
Stochastic Resource-Constrained Project Scheduling Problem(SRCPSP) can be applied
for developing proposals. The presented validation study confirms that the approach
is capable to calculate and optimize the planning objectives when developing a
service for complex engineering projects
author:
- first_name: Sven
full_name: Tackenberg, Sven
id: '71470'
last_name: Tackenberg
- first_name: Sönke
full_name: Duckwitz, Sönke
last_name: Duckwitz
- first_name: Thilo Gerhard
full_name: Gamber, Thilo Gerhard
id: '71451'
last_name: Gamber
citation:
ama: 'Tackenberg S, Duckwitz S, Gamber TG. Robust Planning of the Provision of complex
Services. In: Villmer F-J, Padoano E, Department of Production Engineering and
Management, eds. Production Engineering and Management. Lemgo; 2018:271-281.'
apa: Tackenberg, S., Duckwitz, S., & Gamber, T. G. (2018). Robust Planning of
the Provision of complex Services. In F.-J. Villmer, E. Padoano, & Department
of Production Engineering and Management (Eds.), Production Engineering and
Management (pp. 271–281). Lemgo.
bjps: Tackenberg S, Duckwitz S and Gamber TG (2018) Robust Planning of the
Provision of Complex Services. In Villmer F-J, Padoano E and Department of Production
Engineering and Management (eds), Production Engineering and Management.
Lemgo, pp. 271–281.
chicago: Tackenberg, Sven, Sönke Duckwitz, and Thilo Gerhard Gamber. “Robust Planning
of the Provision of Complex Services.” In Production Engineering and Management,
edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering
and Management, 271–81. Lemgo, 2018.
chicago-de: 'Tackenberg, Sven, Sönke Duckwitz und Thilo Gerhard Gamber. 2018. Robust
Planning of the Provision of complex Services. In: Production Engineering and
Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production
Engineering and Management, 271–281. Lemgo.'
din1505-2-1: 'Tackenberg, Sven ; Duckwitz, Sönke ; Gamber,
Thilo Gerhard: Robust Planning of the Provision of complex Services. In:
Villmer, F.-J. ; Padoano,
E. ; Department of Production Engineering
and Management (Hrsg.): Production Engineering and Management. Lemgo,
2018, S. 271–281'
havard: 'S. Tackenberg, S. Duckwitz, T.G. Gamber, Robust Planning of the Provision
of complex Services, in: F.-J. Villmer, E. Padoano, Department of Production Engineering
and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp.
271–281.'
ieee: S. Tackenberg, S. Duckwitz, and T. G. Gamber, “Robust Planning of the Provision
of complex Services,” in Production Engineering and Management, Lemgo,
2018, no. 1, pp. 271–281.
mla: Tackenberg, Sven, et al. “Robust Planning of the Provision of Complex Services.”
Production Engineering and Management, edited by Franz-Josef Villmer et
al., no. 1, 2018, pp. 271–81.
short: 'S. Tackenberg, S. Duckwitz, T.G. Gamber, in: F.-J. Villmer, E. Padoano,
Department of Production Engineering and Management (Eds.), Production Engineering
and Management, Lemgo, 2018, pp. 271–281.'
ufg: 'Tackenberg, Sven et. al. (2018): Robust Planning of the Provision of
complex Services, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering
and Management, Lemgo, S. 271–281.'
van: 'Tackenberg S, Duckwitz S, Gamber TG. Robust Planning of the Provision of complex
Services. In: Villmer F-J, Padoano E, Department of Production Engineering and
Management, editors. Production Engineering and Management. Lemgo; 2018. p. 271–81.'
conference:
end_date: 2018-10-05
location: Lemgo
name: Proceedings 8th International Conference
start_date: 2018-10-04
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-13T16:11:29Z
date_updated: 2023-03-15T13:50:08Z
department:
- _id: DEP7020
- _id: DEP1305
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
issue: '1'
keyword:
- SRCPSP
- Simulation
- Petri Nets
- Proposal development
language:
- iso: eng
page: 271-281
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-946856-03-0
publication_status: published
status: public
title: Robust Planning of the Provision of complex Services
type: conference
user_id: '74004'
year: 2018
...
---
_id: '549'
author:
- first_name: André
full_name: Springer, André
id: '71733'
last_name: Springer
- first_name: Sarah
full_name: Nothdurft, Sarah
last_name: Nothdurft
- first_name: Rabi
full_name: Lahdo, Rabi
last_name: Lahdo
- first_name: Oliver
full_name: Seffer, Oliver
last_name: Seffer
citation:
ama: 'Springer A, Nothdurft S, Lahdo R, Seffer O. Dissimilar Metal Joints - Laser
Based Manufacturing Processes for Components of Tomorrow. Lemgo: Technische
Hochschule Ostwestfalen-Lippe; 2018.'
apa: 'Springer, A., Nothdurft, S., Lahdo, R., & Seffer, O. (2018). Dissimilar
Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow.
8th International Conference on Production Engineering and Management.
Lemgo: Technische Hochschule Ostwestfalen-Lippe.'
bjps: 'Springer A et al. (2018) Dissimilar Metal Joints - Laser
Based Manufacturing Processes for Components of Tomorrow. Lemgo: Technische
Hochschule Ostwestfalen-Lippe.'
chicago: 'Springer, André, Sarah Nothdurft, Rabi Lahdo, and Oliver Seffer. Dissimilar
Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow.
8th International Conference on Production Engineering and Management.
Lemgo: Technische Hochschule Ostwestfalen-Lippe, 2018.'
chicago-de: 'Springer, André, Sarah Nothdurft, Rabi Lahdo und Oliver Seffer. 2018.
Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components
of Tomorrow. 8th International Conference on Production Engineering and
Management. Lemgo: Technische Hochschule Ostwestfalen-Lippe.'
din1505-2-1: 'Springer, André ; Nothdurft, Sarah ; Lahdo,
Rabi ; Seffer, Oliver: Dissimilar
Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow.
Lemgo : Technische Hochschule Ostwestfalen-Lippe, 2018'
havard: A. Springer, S. Nothdurft, R. Lahdo, O. Seffer, Dissimilar Metal Joints
- Laser Based Manufacturing Processes for Components of Tomorrow, Technische Hochschule
Ostwestfalen-Lippe, Lemgo, 2018.
ieee: 'A. Springer, S. Nothdurft, R. Lahdo, and O. Seffer, Dissimilar Metal Joints
- Laser Based Manufacturing Processes for Components of Tomorrow. Lemgo: Technische
Hochschule Ostwestfalen-Lippe, 2018.'
mla: Springer, André, et al. “Dissimilar Metal Joints - Laser Based Manufacturing
Processes for Components of Tomorrow.” 8th International Conference on Production
Engineering and Management, Technische Hochschule Ostwestfalen-Lippe, 2018.
short: A. Springer, S. Nothdurft, R. Lahdo, O. Seffer, Dissimilar Metal Joints -
Laser Based Manufacturing Processes for Components of Tomorrow, Technische Hochschule
Ostwestfalen-Lippe, Lemgo, 2018.
ufg: 'Springer, André et. al. (2018): Dissimilar Metal Joints - Laser Based
Manufacturing Processes for Components of Tomorrow, Lemgo.'
van: 'Springer A, Nothdurft S, Lahdo R, Seffer O. Dissimilar Metal Joints - Laser
Based Manufacturing Processes for Components of Tomorrow. 8th International Conference
on Production Engineering and Management. Lemgo: Technische Hochschule Ostwestfalen-Lippe;
2018.'
conference:
end_date: 2018-10-05
location: Lemgo
name: 8th International Conference
start_date: 2018-10-04
date_created: 2019-02-13T13:42:56Z
date_updated: 2023-03-15T13:49:59Z
department:
- _id: DEP1306
- _id: DEP7037
keyword:
- Dissimilar metal joints
- Laser processes
- Multi-material components
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf
oa: '1'
place: Lemgo
publication: 8th International Conference on Production Engineering and Management
publication_identifier:
isbn:
- 978-3-946856-03-0
publication_status: published
publisher: Technische Hochschule Ostwestfalen-Lippe
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf
status: public
title: Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components
of Tomorrow
type: conference_editor_article
user_id: '79260'
year: 2018
...
---
_id: '550'
abstract:
- lang: eng
text: Additive Manufacturing (AM) technologies are increasingly used for final part
production. Especially technologies for processing of metal, like Selective LaserMelting
(SLM), arefocusedin this area. The shift from prototyping towards final part
production results in enhanced requirements for repeatability and predictability
of the part quality. Machine manufacturers offer process monitoring solutions
for different aspects of the production process, like the powder bed surface,
the melt pool, and the laser energy. Nevertheless, the significance of these systems
is not fully proven and threshold values for the monitored process parameters
have to be determined for each product individually. This impedes the development
of suitable process control systems. The paper gives an overview ofexistingresearch
approaches and available process monitoring systems for SLM and their applicability
for predicting certain part characteristics. The existing solutions are evaluated
based on own research results. Next, AM specific difficulties for the development
of process control tools and possible solutions are discussed.
author:
- first_name: Andrea
full_name: Huxol, Andrea
id: '43559'
last_name: Huxol
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
id: '14290'
last_name: Villmer
citation:
ama: 'Huxol A, Villmer F-J. Process Control for Selective Laser Melting - Opprtunities
and Limitations. In: Villmer F-J, Padoano E, Department of Production Engineering
and Management, eds. Production Engineering and Management. Lemgo; 2018:17-28.'
apa: Huxol, A., & Villmer, F.-J. (2018). Process Control for Selective Laser
Melting - Opprtunities and Limitations. In F.-J. Villmer, E. Padoano, & Department
of Production Engineering and Management (Eds.), Production Engineering and
Management (pp. 17–28). Lemgo.
bjps: Huxol A and Villmer F-J (2018) Process Control for Selective Laser
Melting - Opprtunities and Limitations. In Villmer F-J, Padoano E and Department
of Production Engineering and Management (eds), Production Engineering and
Management. Lemgo, pp. 17–28.
chicago: Huxol, Andrea, and Franz-Josef Villmer. “Process Control for Selective
Laser Melting - Opprtunities and Limitations.” In Production Engineering and
Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of
Production Engineering and Management, 17–28. Lemgo, 2018.
chicago-de: 'Huxol, Andrea und Franz-Josef Villmer. 2018. Process Control for Selective
Laser Melting - Opprtunities and Limitations. In: Production Engineering and
Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production
Engineering and Management, 17–28. Lemgo.'
din1505-2-1: 'Huxol, Andrea ; Villmer, Franz-Josef: Process Control
for Selective Laser Melting - Opprtunities and Limitations. In: Villmer,
F.-J. ; Padoano, E. ; Department of Production Engineering and Management
(Hrsg.): Production Engineering and Management. Lemgo, 2018, S. 17–28'
havard: 'A. Huxol, F.-J. Villmer, Process Control for Selective Laser Melting -
Opprtunities and Limitations, in: F.-J. Villmer, E. Padoano, Department of Production
Engineering and Management (Eds.), Production Engineering and Management, Lemgo,
2018: pp. 17–28.'
ieee: A. Huxol and F.-J. Villmer, “Process Control for Selective Laser Melting -
Opprtunities and Limitations,” in Production Engineering and Management,
Lemgo, 2018, no. 1, pp. 17–28.
mla: Huxol, Andrea, and Franz-Josef Villmer. “Process Control for Selective Laser
Melting - Opprtunities and Limitations.” Production Engineering and Management,
edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 17–28.
short: 'A. Huxol, F.-J. Villmer, in: F.-J. Villmer, E. Padoano, Department of Production
Engineering and Management (Eds.), Production Engineering and Management, Lemgo,
2018, pp. 17–28.'
ufg: 'Huxol, Andrea/Villmer, Franz-Josef (2018): Process Control for Selective
Laser Melting - Opprtunities and Limitations, in: Franz-Josef Villmer et. al.
(Hgg.): Production Engineering and Management, Lemgo, S. 17–28.'
van: 'Huxol A, Villmer F-J. Process Control for Selective Laser Melting - Opprtunities
and Limitations. In: Villmer F-J, Padoano E, Department of Production Engineering
and Management, editors. Production Engineering and Management. Lemgo; 2018. p.
17–28.'
conference:
end_date: 2018-10-05
location: Lemgo
name: Proceedings 8th International Conference
start_date: 2018-10-04
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-13T13:55:29Z
date_updated: 2023-03-15T13:50:00Z
department:
- _id: DEP1306
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
issue: '1'
keyword:
- Additive manufacturing
- Process capability
- Process monitoring
- Quality assurance
- Final part production
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf
oa: '1'
page: 17-28
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-946856-03-0
publication_status: published
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf
status: public
title: Process Control for Selective Laser Melting - Opprtunities and Limitations
type: conference
user_id: '45673'
year: 2018
...
---
_id: '551'
abstract:
- lang: eng
text: Companies that use product lifecycle management (PLM) systems need to configure
them individually. Such configuration is considered as a software development
process. This article demonstrates how the software development process for PLM
configuration can be improved by applying applicationlifecycle management (ALM)
concepts. This paper explains how such a conceptdesigncan be created and implemented.
The concept was evaluated in a real industrial case study. By this, it provides
valuable insights useablefor any company, facing similar challenges as depicted
in this paper.
author:
- first_name: Martin
full_name: Heister, Martin
id: '68780'
last_name: Heister
- first_name: Andreas
full_name: Deuter, Andreas
id: '62088'
last_name: Deuter
- first_name: B.
full_name: Schrader, B.
last_name: Schrader
citation:
ama: 'Heister M, Deuter A, Schrader B. Design of an ALM-Based Process for Configuring
PLM Systems. In: Villmer F-J, Padoano E, Department of Production Engineering
and Management, eds. Production Engineering and Management. Lemgo; 2018:31-41.'
apa: Heister, M., Deuter, A., & Schrader, B. (2018). Design of an ALM-Based
Process for Configuring PLM Systems. In F.-J. Villmer, E. Padoano, & Department
of Production Engineering and Management (Eds.), Production Engineering and
Management (pp. 31–41). Lemgo.
bjps: Heister M, Deuter A and Schrader B (2018) Design of an ALM-Based Process
for Configuring PLM Systems. In Villmer F-J, Padoano E and Department of Production
Engineering and Management (eds), Production Engineering and Management.
Lemgo, pp. 31–41.
chicago: Heister, Martin, Andreas Deuter, and B. Schrader. “Design of an ALM-Based
Process for Configuring PLM Systems.” In Production Engineering and Management,
edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering
and Management, 31–41. Lemgo, 2018.
chicago-de: 'Heister, Martin, Andreas Deuter und B. Schrader. 2018. Design of an
ALM-Based Process for Configuring PLM Systems. In: Production Engineering and
Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production
Engineering and Management, 31–41. Lemgo.'
din1505-2-1: 'Heister, Martin ; Deuter, Andreas ; Schrader,
B.: Design of an ALM-Based Process for Configuring PLM Systems. In: Villmer, F.-J. ; Padoano,
E. ; Department of Production Engineering
and Management (Hrsg.): Production Engineering and Management. Lemgo,
2018, S. 31–41'
havard: 'M. Heister, A. Deuter, B. Schrader, Design of an ALM-Based Process for
Configuring PLM Systems, in: F.-J. Villmer, E. Padoano, Department of Production
Engineering and Management (Eds.), Production Engineering and Management, Lemgo,
2018: pp. 31–41.'
ieee: M. Heister, A. Deuter, and B. Schrader, “Design of an ALM-Based Process for
Configuring PLM Systems,” in Production Engineering and Management, Lemgo,
2018, no. 1, pp. 31–41.
mla: Heister, Martin, et al. “Design of an ALM-Based Process for Configuring PLM
Systems.” Production Engineering and Management, edited by Franz-Josef
Villmer et al., no. 1, 2018, pp. 31–41.
short: 'M. Heister, A. Deuter, B. Schrader, in: F.-J. Villmer, E. Padoano, Department
of Production Engineering and Management (Eds.), Production Engineering and Management,
Lemgo, 2018, pp. 31–41.'
ufg: 'Heister, Martin et. al. (2018): Design of an ALM-Based Process for
Configuring PLM Systems, in: Franz-Josef Villmer et. al. (Hgg.): Production
Engineering and Management, Lemgo, S. 31–41.'
van: 'Heister M, Deuter A, Schrader B. Design of an ALM-Based Process for Configuring
PLM Systems. In: Villmer F-J, Padoano E, Department of Production Engineering
and Management, editors. Production Engineering and Management. Lemgo; 2018. p.
31–41.'
conference:
end_date: 2018-10-05
location: Lemgo
name: Proceedings 8th International Conference
start_date: 2018-10-04
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-13T14:03:03Z
date_updated: 2023-03-15T13:50:00Z
department:
- _id: DEP1306
- _id: DEP7022
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
issue: '1'
keyword:
- PLM
- ALM
- Software engineering
- V-model
- Scrum
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf
oa: '1'
page: 31-41
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-946856-03-0
publication_status: published
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf
status: public
title: Design of an ALM-Based Process for Configuring PLM Systems
type: conference
user_id: '62088'
year: 2018
...
---
_id: '552'
abstract:
- lang: eng
text: 'Since additive manufacturing (AM) is continuously growing, the influence
of processing conditions and setup parameters on microstructural and mechanical
properties of additively manufacturedcomponents needs to be clarified. The paper
discusses an experimental approach for the identification of influencing parameters
in Selective Laser Melting; this consists of an evaluation of the mechanical and
physical properties of final parts, depending on the chosen process parameters.
The Design of Experiments is used to get valid results from a limited number of
experiments. The research work focuses on the application of a Definitive Screening
Design to identify the most important influencing parameters: Several parameters
of the hatch and the contour exposure are varied, as well as the position and
orientation of the samples in the build chamber. A maraging steel and a CoCr alloy
are used, and the mechanical and physical properties of the samples are evaluated.
The interdependencies between the variation of the factors and the observed properties
are analyzed.'
author:
- first_name: F.
full_name: Simoni, F.
last_name: Simoni
- first_name: Andrea
full_name: Huxol, Andrea
id: '43559'
last_name: Huxol
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
id: '14290'
last_name: Villmer
citation:
ama: 'Simoni F, Huxol A, Villmer F-J. Analysis of Influencing Parameters on Mechanical
and Physical Properties of SLM Parts. In: Villmer F-J, Padoano E, Department of
Production Engineering and Management, eds. Production Engineering and Management.
Lemgo; 2018:43-55.'
apa: Simoni, F., Huxol, A., & Villmer, F.-J. (2018). Analysis of Influencing
Parameters on Mechanical and Physical Properties of SLM Parts. In F.-J. Villmer,
E. Padoano, & Department of Production Engineering and Management (Eds.),
Production Engineering and Management (pp. 43–55). Lemgo.
bjps: Simoni F, Huxol A and Villmer F-J (2018) Analysis of Influencing Parameters
on Mechanical and Physical Properties of SLM Parts. In Villmer F-J, Padoano E
and Department of Production Engineering and Management (eds), Production Engineering
and Management. Lemgo, pp. 43–55.
chicago: Simoni, F., Andrea Huxol, and Franz-Josef Villmer. “Analysis of Influencing
Parameters on Mechanical and Physical Properties of SLM Parts.” In Production
Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and
Department of Production Engineering and Management, 43–55. Lemgo, 2018.
chicago-de: 'Simoni, F., Andrea Huxol und Franz-Josef Villmer. 2018. Analysis of
Influencing Parameters on Mechanical and Physical Properties of SLM Parts. In:
Production Engineering and Management, hg. von Franz-Josef Villmer, Elio
Padoano, und Department of Production Engineering and Management, 43–55. Lemgo.'
din1505-2-1: 'Simoni, F. ; Huxol,
Andrea ; Villmer, Franz-Josef:
Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM
Parts. In: Villmer, F.-J. ; Padoano, E. ; Department
of Production Engineering and Management (Hrsg.): Production Engineering
and Management. Lemgo, 2018, S. 43–55'
havard: 'F. Simoni, A. Huxol, F.-J. Villmer, Analysis of Influencing Parameters
on Mechanical and Physical Properties of SLM Parts, in: F.-J. Villmer, E. Padoano,
Department of Production Engineering and Management (Eds.), Production Engineering
and Management, Lemgo, 2018: pp. 43–55.'
ieee: F. Simoni, A. Huxol, and F.-J. Villmer, “Analysis of Influencing Parameters
on Mechanical and Physical Properties of SLM Parts,” in Production Engineering
and Management, Lemgo, 2018, no. 1, pp. 43–55.
mla: Simoni, F., et al. “Analysis of Influencing Parameters on Mechanical and Physical
Properties of SLM Parts.” Production Engineering and Management, edited
by Franz-Josef Villmer et al., no. 1, 2018, pp. 43–55.
short: 'F. Simoni, A. Huxol, F.-J. Villmer, in: F.-J. Villmer, E. Padoano, Department
of Production Engineering and Management (Eds.), Production Engineering and Management,
Lemgo, 2018, pp. 43–55.'
ufg: 'Simoni, F. et. al. (2018): Analysis of Influencing Parameters on Mechanical
and Physical Properties of SLM Parts, in: Franz-Josef Villmer et. al. (Hgg.):
Production Engineering and Management, Lemgo, S. 43–55.'
van: 'Simoni F, Huxol A, Villmer F-J. Analysis of Influencing Parameters on Mechanical
and Physical Properties of SLM Parts. In: Villmer F-J, Padoano E, Department of
Production Engineering and Management, editors. Production Engineering and Management.
Lemgo; 2018. p. 43–55.'
conference:
end_date: 2018-10-05
location: Lemgo
name: Proceedings 8th International Conference
start_date: 2018-10-04
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-13T14:11:15Z
date_updated: 2023-03-15T13:50:00Z
department:
- _id: DEP1306
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
issue: '1'
keyword:
- Additive manufacturing
- Process parameters
- Design of Experiments
- Density measurement
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf
oa: '1'
page: 43-55
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-946856-03-0
publication_status: published
status: public
title: Analysis of Influencing Parameters on Mechanical and Physical Properties of
SLM Parts
type: conference
user_id: '45673'
year: 2018
...
---
_id: '553'
abstract:
- lang: eng
text: Selective laser melting is a powder bed fusion technology that uses a laser
as an energy source in order to directly build fullydensemetal parts. Optimal
fabrication requires a comprehensiveunderstanding of the main processing,as it
affectsthe part quality. Wherefore, the objective of this paper is to perform
a survey, data checking and collecting ofprovided parameters to compare and contextualize
it versus the respective values used in the processby the research studies. The
work is focused on cobalt-chromium alloys (CoCr) which are widely used in dental
and medical applications. This work focusesonsurfacequality and hardness as built
and after the post-processes. As well, the approaches in bond strength after post-processing
are considered, comparing the results made by different manufacturing techniques.
Finally, this work compares results acquired in surface roughness asbuilt, and
tensile strength of parts made by selective laser melting versus the traditional
technique cast, before and after heat treatment.
author:
- first_name: Joyce
full_name: Silva Gimenes Gandara, Joyce
id: '70765'
last_name: Silva Gimenes Gandara
- first_name: Andrea
full_name: Huxol, Andrea
id: '43559'
last_name: Huxol
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
id: '14290'
last_name: Villmer
citation:
ama: 'Silva Gimenes Gandara J, Huxol A, Villmer F-J. Selective Laser Melting - CoCr
Approach: Analysis of Manufacturer Parameters Versus Research Results. In: Villmer
F-J, Padoano E, Department of Production Engineering and Management, eds. Production
Engineering and Management. Lemgo; 2018:57-69.'
apa: 'Silva Gimenes Gandara, J., Huxol, A., & Villmer, F.-J. (2018). Selective
Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research
Results. In F.-J. Villmer, E. Padoano, & Department of Production Engineering
and Management (Eds.), Production Engineering and Management (pp. 57–69).
Lemgo.'
bjps: 'Silva Gimenes Gandara J, Huxol A and Villmer F-J (2018) Selective
Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research
Results. In Villmer F-J, Padoano E and Department of Production Engineering and
Management (eds), Production Engineering and Management. Lemgo, pp. 57–69.'
chicago: 'Silva Gimenes Gandara, Joyce, Andrea Huxol, and Franz-Josef Villmer. “Selective
Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research
Results.” In Production Engineering and Management, edited by Franz-Josef
Villmer, Elio Padoano, and Department of Production Engineering and Management,
57–69. Lemgo, 2018.'
chicago-de: 'Silva Gimenes Gandara, Joyce, Andrea Huxol und Franz-Josef Villmer.
2018. Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters
Versus Research Results. In: Production Engineering and Management, hg.
von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering
and Management, 57–69. Lemgo.'
din1505-2-1: 'Silva Gimenes Gandara, Joyce
; Huxol, Andrea ; Villmer,
Franz-Josef: Selective Laser Melting - CoCr Approach: Analysis of Manufacturer
Parameters Versus Research Results. In: Villmer,
F.-J. ; Padoano, E. ; Department of Production Engineering and Management
(Hrsg.): Production Engineering and Management. Lemgo, 2018, S. 57–69'
havard: 'J. Silva Gimenes Gandara, A. Huxol, F.-J. Villmer, Selective Laser Melting
- CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results,
in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management
(Eds.), Production Engineering and Management, Lemgo, 2018: pp. 57–69.'
ieee: 'J. Silva Gimenes Gandara, A. Huxol, and F.-J. Villmer, “Selective Laser Melting
- CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results,”
in Production Engineering and Management, 2018, no. 1, pp. 57–69.'
mla: 'Silva Gimenes Gandara, Joyce, et al. “Selective Laser Melting - CoCr Approach:
Analysis of Manufacturer Parameters Versus Research Results.” Production Engineering
and Management, edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 57–69.'
short: 'J. Silva Gimenes Gandara, A. Huxol, F.-J. Villmer, in: F.-J. Villmer, E.
Padoano, Department of Production Engineering and Management (Eds.), Production
Engineering and Management, Lemgo, 2018, pp. 57–69.'
ufg: 'Silva Gimenes Gandara, Joyce et. al. (2018): Selective Laser Melting
- CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results,
in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management,
Lemgo, S. 57–69.'
van: 'Silva Gimenes Gandara J, Huxol A, Villmer F-J. Selective Laser Melting - CoCr
Approach: Analysis of Manufacturer Parameters Versus Research Results. In: Villmer
F-J, Padoano E, Department of Production Engineering and Management, editors.
Production Engineering and Management. Lemgo; 2018. p. 57–69.'
conference:
end_date: 2018-10-05
name: Proceedings 8th International Conference
start_date: 2018-10-04
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-13T14:20:54Z
date_updated: 2023-03-15T13:50:00Z
department:
- _id: DEP1306
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
issue: '1'
keyword:
- Additive manufacturing
- Material properties
- Part properties
- Process parameters
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf
oa: '1'
page: 57-69
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-946856-03-0
publication_status: published
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf
status: public
title: 'Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters
Versus Research Results'
type: conference
user_id: '45673'
year: 2018
...
---
_id: '554'
abstract:
- lang: eng
text: Light guiding structures, like optical waveguides or fibers, take an important
role in several industries, e.g. communication, sensing, illumination or medical
applications. For the latter, it could be very interesting to have the possibility
to manufacture problem-adapted structureswith a mechanicalfunctionality andwith
additional embedded optical or electrical sensor functionalities.Modern additive
manufacturing (AM) technologies like Stereolithography (SLA) or Fused Layer Modeling
(FLM) may provide these opportunities.This paper is aimedto figure out the light
guiding opportunities of both technologies. For this different kind of structures
are built by FLM and SLA. To compare both manufacturing technologies, the layout
of each structure is identical for both technologies. After manufacturing, the
transmission and the attenuation of the guided light of these structures areanalyzed
by measurement.Then the measurement results of the different technologies are
compared with each other.
author:
- first_name: Micha
full_name: Beyer, Micha
id: '71403'
last_name: Beyer
- first_name: Oliver
full_name: Stübbe, Oliver
id: '51864'
last_name: Stübbe
orcid: https://orcid.org/0000-0001-7293-6893
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
id: '14290'
last_name: Villmer
citation:
ama: 'Beyer M, Stübbe O, Villmer FJ. Comparsion of FLM and SLA Processing Technologies
Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications.
In: Villmer FJ, Padoano E, Department of Production Engineering and Management,
Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management :
Proceedings 8th International Conference, October 04 and 05, 2018, Lemgo, Germany.
Publication series in direct digital manufacturing. ; 2018:70-82.'
apa: 'Beyer, M., Stübbe, O., & Villmer, F.-J. (2018). Comparsion of FLM and
SLA Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi
and Sensing Applications. In F.-J. Villmer, E. Padoano, Department of Production
Engineering and Management, & Hochschule Ostwestfalen-Lippe (Eds.), Production
engineering and management : proceedings 8th international conference, October
04 and 05, 2018, Lemgo, Germany (Issue 1, pp. 70–82).'
bjps: 'Beyer M, Stübbe O and Villmer F-J (2018) Comparsion of FLM and SLA
Processing Technologies Towards Manufacturing of Optical Waveguides for Communicationi
and Sensing Applications. In Villmer F-J et al. (eds), Production Engineering
and Management : Proceedings 8th International Conference, October 04 and 05,
2018, Lemgo, Germany. Lemgo, pp. 70–82.'
chicago: 'Beyer, Micha, Oliver Stübbe, and Franz-Josef Villmer. “Comparsion of FLM
and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for
Communicationi and Sensing Applications.” In Production Engineering and Management :
Proceedings 8th International Conference, October 04 and 05, 2018, Lemgo, Germany,
edited by Franz-Josef Villmer, Elio Padoano, Department of Production Engineering
and Management, and Hochschule Ostwestfalen-Lippe, 70–82. Publication Series in
Direct Digital Manufacturing. Lemgo, 2018.'
chicago-de: 'Beyer, Micha, Oliver Stübbe und Franz-Josef Villmer. 2018. Comparsion
of FLM and SLA Processing Technologies Towards Manufacturing of Optical Waveguides
for Communicationi and Sensing Applications. In: Production engineering and
management : proceedings 8th international conference, October 04 and 05, 2018,
Lemgo, Germany, hg. von Franz-Josef Villmer, Elio Padoano, Department of Production
Engineering and Management, und Hochschule Ostwestfalen-Lippe, 70–82. Publication
series in direct digital manufacturing. Lemgo.'
din1505-2-1: 'Beyer, Micha ; Stübbe, Oliver ; Villmer,
Franz-Josef: Comparsion of FLM and SLA Processing Technologies Towards
Manufacturing of Optical Waveguides for Communicationi and Sensing Applications.
In: Villmer, F.-J. ; Padoano,
E. ; Department of Production Engineering
and Management ; Hochschule Ostwestfalen-Lippe
(Hrsg.): Production engineering and management : proceedings 8th international
conference, October 04 and 05, 2018, Lemgo, Germany, Publication series
in direct digital manufacturing. Lemgo, 2018, S. 70–82'
havard: 'M. Beyer, O. Stübbe, F.-J. Villmer, Comparsion of FLM and SLA Processing
Technologies Towards Manufacturing of Optical Waveguides for Communicationi and
Sensing Applications, in: F.-J. Villmer, E. Padoano, Department of Production
Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering
and Management : Proceedings 8th International Conference, October 04 and 05,
2018, Lemgo, Germany, Lemgo, 2018: pp. 70–82.'
ieee: 'M. Beyer, O. Stübbe, and F.-J. Villmer, “Comparsion of FLM and SLA Processing
Technologies Towards Manufacturing of Optical Waveguides for Communicationi and
Sensing Applications,” in Production engineering and management : proceedings
8th international conference, October 04 and 05, 2018, Lemgo, Germany, Lemgo,
2018, no. 1, pp. 70–82.'
mla: 'Beyer, Micha, et al. “Comparsion of FLM and SLA Processing Technologies Towards
Manufacturing of Optical Waveguides for Communicationi and Sensing Applications.”
Production Engineering and Management : Proceedings 8th International Conference,
October 04 and 05, 2018, Lemgo, Germany, edited by Franz-Josef Villmer et
al., no. 1, 2018, pp. 70–82.'
short: 'M. Beyer, O. Stübbe, F.-J. Villmer, in: F.-J. Villmer, E. Padoano, Department
of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.),
Production Engineering and Management : Proceedings 8th International Conference,
October 04 and 05, 2018, Lemgo, Germany, Lemgo, 2018, pp. 70–82.'
ufg: 'Beyer, Micha/Stübbe, Oliver/Villmer, Franz-Josef: Comparsion of FLM
and SLA Processing Technologies Towards Manufacturing of Optical Waveguides for
Communicationi and Sensing Applications, in: Villmer, Franz-Josef u. a. (Hgg.):
Production engineering and management : proceedings 8th international conference,
October 04 and 05, 2018, Lemgo, Germany, Lemgo 2018 (Publication series in direct
digital manufacturing), S. 70–82.'
van: 'Beyer M, Stübbe O, Villmer FJ. Comparsion of FLM and SLA Processing Technologies
Towards Manufacturing of Optical Waveguides for Communicationi and Sensing Applications.
In: Villmer FJ, Padoano E, Department of Production Engineering and Management,
Hochschule Ostwestfalen-Lippe, editors. Production engineering and management :
proceedings 8th international conference, October 04 and 05, 2018, Lemgo, Germany.
Lemgo; 2018. p. 70–82. (Publication series in direct digital manufacturing).'
conference:
end_date: 2018-10-05
location: Lemgo
name: Proceedings 8th International Conference
start_date: 2018-10-04
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-13T14:29:45Z
date_updated: 2024-04-19T12:56:30Z
department:
- _id: DEP1306
- _id: DEP5000
- _id: DEP5020
- _id: DEP6020
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
issue: '1'
keyword:
- Additive manufacturing
- Embedded optical waveguides
- Optical sensors
- SLA technology
- FLM technology
language:
- iso: eng
page: 70-82
place: Lemgo
publication: 'Production engineering and management : proceedings 8th international
conference, October 04 and 05, 2018, Lemgo, Germany'
publication_identifier:
isbn:
- 978-3-946856-03-0
publication_status: published
series_title: Publication series in direct digital manufacturing
status: public
title: Comparsion of FLM and SLA Processing Technologies Towards Manufacturing of
Optical Waveguides for Communicationi and Sensing Applications
type: conference
user_id: '51864'
year: '2018'
...
---
_id: '555'
abstract:
- lang: eng
text: Although it is recommended to store goods in a warehouse based on the principle
of first in first out, it is still unavoidable to use block storage of storing,
for example, long andbulky goods. If the major advantage of block storage in area
saving is themost important, the companyhas to accept the removal principle of
last in first out or in other words, first in last out. The last goods to be stocked
are the first goods to be removed and the first stocked goods are the last to
be removed. There are some special observations in the block storage concerned
in this paper. The first one is that the goods in the storage ordered by the customers
can often not be removed directly from the storage without any stock movement.
Theaim is to not only benefit fromthe high-density storage solution but also decrease
the negative influence of block storage, especially when pre-stocked goods must
be removed at first. The second observation is that during one concerned time
period, forexample, one day, there may be several operations of put-away and several
operations of order picking for shipment preparation. The third observation is
that before goods are put away to storage, which goods to be removed are not always
predictable. The preplanned removal dates are quite often unexpected changed.
In this paper, scenarios with different dynamic properties and stochastic probabilities
have been concerned and defined. Strategies for the three main stages of put-away,
i.e. stacking, pre-marshalingand retrieval are defined and examined developed.
Simulations have been conducted to examine the strategies based on different scenarios.
The aimis to select the right strategy which may reduce the overall relocation
operations. It is expected that the sum of blocks movement during put-away i.e.
stacking, pre-marshaling, and block retrieval is optimally minimized.
author:
- first_name: Li
full_name: Li, Li
id: '58482'
last_name: Li
citation:
ama: 'Li L. Put-Away and Retrieval Optimization Strategies towards Reduction of
Blocks Relocations in a Block Storage. In: Villmer F-J, Padoano E, Department
of Production Engineering and Management, eds. Lemgo; 2018:101-112.'
apa: Li, L. (2018). Put-Away and Retrieval Optimization Strategies towards Reduction
of Blocks Relocations in a Block Storage. In F.-J. Villmer, E. Padoano, &
Department of Production Engineering and Management (Eds.) (pp. 101–112). Presented
at the Proceedings 8th International Conference, Lemgo.
bjps: Li L (2018) Put-Away and Retrieval Optimization Strategies towards
Reduction of Blocks Relocations in a Block Storage. In Villmer F-J, Padoano E
and Department of Production Engineering and Management (eds). Lemgo, pp. 101–112.
chicago: Li, Li. “Put-Away and Retrieval Optimization Strategies towards Reduction
of Blocks Relocations in a Block Storage.” edited by Franz-Josef Villmer, Elio
Padoano, and Department of Production Engineering and Management, 101–12. Lemgo,
2018.
chicago-de: 'Li, Li. 2018. Put-Away and Retrieval Optimization Strategies towards
Reduction of Blocks Relocations in a Block Storage. In: , hg. von Franz-Josef
Villmer, Elio Padoano, und Department of Production Engineering and Management,
101–112. Lemgo.'
din1505-2-1: 'Li, Li: Put-Away and
Retrieval Optimization Strategies towards Reduction of Blocks Relocations in a
Block Storage. In: Villmer, F.-J.
; Padoano, E. ; Department
of Production Engineering and Management (Hrsg.): . Lemgo, 2018, S. 101–112'
havard: 'L. Li, Put-Away and Retrieval Optimization Strategies towards Reduction
of Blocks Relocations in a Block Storage, in: F.-J. Villmer, E. Padoano, Department
of Production Engineering and Management (Eds.), Lemgo, 2018: pp. 101–112.'
ieee: L. Li, “Put-Away and Retrieval Optimization Strategies towards Reduction of
Blocks Relocations in a Block Storage,” presented at the Proceedings 8th International
Conference, Lemgo, 2018, no. 1, pp. 101–112.
mla: Li, Li. Put-Away and Retrieval Optimization Strategies towards Reduction
of Blocks Relocations in a Block Storage. Edited by Franz-Josef Villmer et
al., no. 1, 2018, pp. 101–12.
short: 'L. Li, in: F.-J. Villmer, E. Padoano, Department of Production Engineering
and Management (Eds.), Lemgo, 2018, pp. 101–112.'
ufg: 'Li, Li (2018): Put-Away and Retrieval Optimization Strategies towards
Reduction of Blocks Relocations in a Block Storage, in: Franz-Josef Villmer et.
al. (Hgg.): , Lemgo, S. 101–112.'
van: 'Li L. Put-Away and Retrieval Optimization Strategies towards Reduction of
Blocks Relocations in a Block Storage. In: Villmer F-J, Padoano E, Department
of Production Engineering and Management, editors. Lemgo; 2018. p. 101–12.'
conference:
end_date: 2019-10-05
location: Lemgo
name: Proceedings 8th International Conference
start_date: 2019-10-04
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-13T15:12:26Z
date_updated: 2023-03-15T13:50:00Z
department:
- _id: DEP7000
- _id: DEP1306
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
issue: '1'
keyword:
- Block storage
- Put-away
- Blocks relocation
- Block retrieval
- Order picking
- First in last out
- First in first out
- Pre-marshalling
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf
oa: '1'
page: 101-112
place: Lemgo
publication_identifier:
isbn:
- 978-3-946856-03-0
publication_status: published
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf
status: public
title: Put-Away and Retrieval Optimization Strategies towards Reduction of Blocks
Relocations in a Block Storage
type: conference
user_id: '45673'
year: 2018
...
---
_id: '557'
abstract:
- lang: eng
text: Current processes for designing manual assembly workstations do not consider
the need for employee-appropriate, product-specific and operating resources-specific
factors. A systematic design tool would help to minimize cycle times, increase
productivity and improve ergonomic criteria. Therefore, a literature research
concerning workplace design for manual assembly was conducted. Additionally, a
guided Interview and a questionnaire were developed and approached on the trade
show “Motek” with 14 participants.The study shows evidence for the assumption
that there is no systematic approach todesigning manual assembly workstations.
author:
- first_name: Henning
full_name: Gote, Henning
id: '64558'
last_name: Gote
- first_name: Thomas
full_name: Glatzel, Thomas
id: '64888'
last_name: Glatzel
citation:
ama: 'Gote H, Glatzel T. Empirical Study of Workplace Design of Manual Assembly
Workstations in SME. In: Villmer F-J, Padoano E, Department of Production Engineering
and Management, eds. Production Engineering and Management. Lemgo; 2018:137-148.'
apa: Gote, H., & Glatzel, T. (2018). Empirical Study of Workplace Design of
Manual Assembly Workstations in SME. In F.-J. Villmer, E. Padoano, & Department
of Production Engineering and Management (Eds.), Production Engineering and
Management (pp. 137–148). Lemgo.
bjps: Gote H and Glatzel T (2018) Empirical Study of Workplace Design of
Manual Assembly Workstations in SME. In Villmer F-J, Padoano E and Department
of Production Engineering and Management (eds), Production Engineering and
Management. Lemgo, pp. 137–148.
chicago: Gote, Henning, and Thomas Glatzel. “Empirical Study of Workplace Design
of Manual Assembly Workstations in SME.” In Production Engineering and Management,
edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering
and Management, 137–48. Lemgo, 2018.
chicago-de: 'Gote, Henning und Thomas Glatzel. 2018. Empirical Study of Workplace
Design of Manual Assembly Workstations in SME. In: Production Engineering and
Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production
Engineering and Management, 137–148. Lemgo.'
din1505-2-1: 'Gote, Henning ; Glatzel, Thomas: Empirical Study of Workplace
Design of Manual Assembly Workstations in SME. In: Villmer,
F.-J. ; Padoano, E. ; Department of Production Engineering and Management
(Hrsg.): Production Engineering and Management. Lemgo, 2018, S. 137–148'
havard: 'H. Gote, T. Glatzel, Empirical Study of Workplace Design of Manual Assembly
Workstations in SME, in: F.-J. Villmer, E. Padoano, Department of Production Engineering
and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp.
137–148.'
ieee: H. Gote and T. Glatzel, “Empirical Study of Workplace Design of Manual Assembly
Workstations in SME,” in Production Engineering and Management, Lemgo,
2018, no. 1, pp. 137–148.
mla: Gote, Henning, and Thomas Glatzel. “Empirical Study of Workplace Design of
Manual Assembly Workstations in SME.” Production Engineering and Management,
edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 137–48.
short: 'H. Gote, T. Glatzel, in: F.-J. Villmer, E. Padoano, Department of Production
Engineering and Management (Eds.), Production Engineering and Management, Lemgo,
2018, pp. 137–148.'
ufg: 'Gote, Henning/Glatzel, Thomas (2018): Empirical Study of Workplace
Design of Manual Assembly Workstations in SME, in: Franz-Josef Villmer et. al.
(Hgg.): Production Engineering and Management, Lemgo, S. 137–148.'
van: 'Gote H, Glatzel T. Empirical Study of Workplace Design of Manual Assembly
Workstations in SME. In: Villmer F-J, Padoano E, Department of Production Engineering
and Management, editors. Production Engineering and Management. Lemgo; 2018. p.
137–48.'
conference:
end_date: 2018-10-05
location: Lemgo
name: Proceedings 8th International Conference
start_date: 2018-10-04
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-13T15:28:52Z
date_updated: 2023-03-15T13:50:00Z
department:
- _id: DEP7020
- _id: DEP1306
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
issue: '1'
keyword:
- Manual assembly
- Workplace design
- Ergonomic workstations
- SME
language:
- iso: eng
page: 137-148
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-946856-03-0
publication_status: published
status: public
title: Empirical Study of Workplace Design of Manual Assembly Workstations in SME
type: conference
user_id: '74004'
year: 2018
...
---
_id: '559'
abstract:
- lang: eng
text: 'The navigation technique has been always an important issue for guiding an
automated guided vehicle (AGV). With the development of sensor technology, software
engineering, andalgorithms, there is a spectrum of different navigation methods
for AGVs. Inorder to avoid the additional environmental installation,so as to
increase the flexibility of route planning, but to keep the positioning precision,
more sensors, such as light detection and ranging (LIDAR), wheel encoders and
gyroscope are installed on the vehicles to be automated. Some intelligent algorithms
such as simultaneous localization and mapping (SLAM) algorithms and Monte Carlo
localization have been developed for the navigation of vehicles, including position
and orientation. The interesting question, especially for the AGVmanufacturers,
is: which algorithm is more suitable for which kind of applications. The suitabilityof
an algorithm for the navigation of AGVs with facilities of Light Detection and
Ranging(LIDAR), encoders and gyroscope ismainly determined by four properties.
They are the positioning precision, computational costs, execution time and positioning
repeatability. This paper intends to investigate the suitability of an algorithm
or a navigation method for AGVs with LIDAR, wheel encoders,and gyroscope. The
two aspects of positioningaccuracy and repeatability are especially concerned.
A general comparison of different navigation methods and algorithms is given.
An experimental platform with a basic vehicle, controlling system and sensors
is then developed to further evaluate the algorithms. The hardware components
and software components are compatible to robot operating system (ROS). This open-source
robotics middleware provides services and tools for creating robot applications.
As ROS SLAM nodes, open-source SLAM algorithms can be evaluated relatively easily
without any rewriting or modification of the algorithms. As a new research field,
there is not jet a SLAM algorithm, which is predominant absolutely.'
author:
- first_name: Li
full_name: Li, Li
id: '58482'
last_name: Li
- first_name: L.
full_name: Schulze, L.
last_name: Schulze
citation:
ama: 'Li L, Schulze L. Comparison and Evaluation of SLAM Algorithms for AGV Navigation.
In: Villmer F-J, Padoano E, Department of Production Engineering and Management,
eds. Production Engineering and Management. Lemgo; 2018:213-223.'
apa: Li, L., & Schulze, L. (2018). Comparison and Evaluation of SLAM Algorithms
for AGV Navigation. In F.-J. Villmer, E. Padoano, & Department of Production
Engineering and Management (Eds.), Production Engineering and Management
(pp. 213–223). Lemgo.
bjps: Li L and Schulze L (2018) Comparison and Evaluation of SLAM Algorithms
for AGV Navigation. In Villmer F-J, Padoano E and Department of Production Engineering
and Management (eds), Production Engineering and Management. Lemgo, pp.
213–223.
chicago: Li, Li, and L. Schulze. “Comparison and Evaluation of SLAM Algorithms for
AGV Navigation.” In Production Engineering and Management, edited by Franz-Josef
Villmer, Elio Padoano, and Department of Production Engineering and Management,
213–23. Lemgo, 2018.
chicago-de: 'Li, Li und L. Schulze. 2018. Comparison and Evaluation of SLAM Algorithms
for AGV Navigation. In: Production Engineering and Management, hg. von
Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and
Management, 213–223. Lemgo.'
din1505-2-1: 'Li, Li ; Schulze,
L.: Comparison and Evaluation of SLAM Algorithms for AGV Navigation. In:
Villmer, F.-J. ; Padoano,
E. ; Department of Production Engineering
and Management (Hrsg.): Production Engineering and Management. Lemgo,
2018, S. 213–223'
havard: 'L. Li, L. Schulze, Comparison and Evaluation of SLAM Algorithms for AGV
Navigation, in: F.-J. Villmer, E. Padoano, Department of Production Engineering
and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp.
213–223.'
ieee: L. Li and L. Schulze, “Comparison and Evaluation of SLAM Algorithms for AGV
Navigation,” in Production Engineering and Management, Lemgo, 2018, no.
1, pp. 213–223.
mla: Li, Li, and L. Schulze. “Comparison and Evaluation of SLAM Algorithms for AGV
Navigation.” Production Engineering and Management, edited by Franz-Josef
Villmer et al., no. 1, 2018, pp. 213–23.
short: 'L. Li, L. Schulze, in: F.-J. Villmer, E. Padoano, Department of Production
Engineering and Management (Eds.), Production Engineering and Management, Lemgo,
2018, pp. 213–223.'
ufg: 'Li, Li/Schulze, L. (2018): Comparison and Evaluation of SLAM Algorithms
for AGV Navigation, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering
and Management, Lemgo, S. 213–223.'
van: 'Li L, Schulze L. Comparison and Evaluation of SLAM Algorithms for AGV Navigation.
In: Villmer F-J, Padoano E, Department of Production Engineering and Management,
editors. Production Engineering and Management. Lemgo; 2018. p. 213–23.'
conference:
end_date: 2018-10-05
location: Lemgo
name: Proceedings 8th International Conference
start_date: 2018-10-04
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-13T15:56:30Z
date_updated: 2023-03-15T13:50:00Z
department:
- _id: DEP7000
- _id: DEP1306
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
issue: '1'
keyword:
- Automatedguided vehicle
- Simultaneous localization and mapping
- Robot operating system
- Light detection and ranging
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf
oa: '1'
page: 213-223
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-946856-03-0
publication_status: published
status: public
title: Comparison and Evaluation of SLAM Algorithms for AGV Navigation
type: conference
user_id: '45673'
year: 2018
...
---
_id: '560'
abstract:
- lang: eng
text: In warehouse planning and dimensioning, many parameters and conditions have
to be met and goals must be fulfilled, e.g. labor and investment costs, desired
throughput and capacity, available material handling technologies and size constraints.
These factors determine the ultimate choice of a particular alternative from a
wide range of solution alternatives.On the one hand, the warehouse planning process
is very complex and takes into account all different aspects of decision-making.
On the other hand, it is expected that the planning period is shorter and shorter.
To balance out the competing interests of accuracy and time, it is a promising
approach to make use of computer-based planning tools. They can be used to find
the most cost-efficientalternative and to visualize its layout.In addition, at
the end of the planning process not only technologies and layout dimensions are
specified, the warehouse layout with the rack configuration, the conveyors and
the buildings should be visualized in three dimensions.It is a promising approach
to integrate the detailed layout drawing through computer-aideddesign tools such
as AutoCAD Inventor into warehouse planning process. Softwareis developed for
detailed warehouse planning. The core modules of the software can generate a favorable
warehouse alternative and an AutoCAD-Add-On for the visualization of the outcomes.With
the planning tool,the planning period can be significantly shortened while simultaneously
the planning quality, especially during the period of rough planning, increases.To
balance out the competing interests of accuracy and time, it is a promising approach
to make use ofcomputer-basedplanning tools. They can be used to find the most
cost-efficientalternative and to visualize its layout.
author:
- first_name: L.
full_name: Schulze, L.
last_name: Schulze
- first_name: Li
full_name: Li, Li
id: '58482'
last_name: Li
citation:
ama: 'Schulze L, Li L. Digitized Planning with Visualization for Warehouse Layouts.
In: Villmer F-J, Padoano E, Department of Production Engineering and Management,
eds. Production Engineering and Management. Lemgo; 2018:233-242.'
apa: Schulze, L., & Li, L. (2018). Digitized Planning with Visualization for
Warehouse Layouts. In F.-J. Villmer, E. Padoano, & Department of Production
Engineering and Management (Eds.), Production Engineering and Management
(pp. 233–242). Lemgo.
bjps: Schulze L and Li L (2018) Digitized Planning with Visualization for
Warehouse Layouts. In Villmer F-J, Padoano E and Department of Production Engineering
and Management (eds), Production Engineering and Management. Lemgo, pp.
233–242.
chicago: Schulze, L., and Li Li. “Digitized Planning with Visualization for Warehouse
Layouts.” In Production Engineering and Management, edited by Franz-Josef
Villmer, Elio Padoano, and Department of Production Engineering and Management,
233–42. Lemgo, 2018.
chicago-de: 'Schulze, L. und Li Li. 2018. Digitized Planning with Visualization
for Warehouse Layouts. In: Production Engineering and Management, hg. von
Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and
Management, 233–242. Lemgo.'
din1505-2-1: 'Schulze, L. ; Li, Li: Digitized Planning with Visualization
for Warehouse Layouts. In: Villmer, F.-J.
; Padoano, E. ; Department
of Production Engineering and Management (Hrsg.): Production Engineering
and Management. Lemgo, 2018, S. 233–242'
havard: 'L. Schulze, L. Li, Digitized Planning with Visualization for Warehouse
Layouts, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and
Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp. 233–242.'
ieee: L. Schulze and L. Li, “Digitized Planning with Visualization for Warehouse
Layouts,” in Production Engineering and Management, Lemgo, 2018, no. 1,
pp. 233–242.
mla: Schulze, L., and Li Li. “Digitized Planning with Visualization for Warehouse
Layouts.” Production Engineering and Management, edited by Franz-Josef
Villmer et al., no. 1, 2018, pp. 233–42.
short: 'L. Schulze, L. Li, in: F.-J. Villmer, E. Padoano, Department of Production
Engineering and Management (Eds.), Production Engineering and Management, Lemgo,
2018, pp. 233–242.'
ufg: 'Schulze, L./Li, Li (2018): Digitized Planning with Visualization for
Warehouse Layouts, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering
and Management, Lemgo, S. 233–242.'
van: 'Schulze L, Li L. Digitized Planning with Visualization for Warehouse Layouts.
In: Villmer F-J, Padoano E, Department of Production Engineering and Management,
editors. Production Engineering and Management. Lemgo; 2018. p. 233–42.'
conference:
end_date: 2018-10-05
location: Lemgo
name: Proceedings 8th International Conference
start_date: 2018-10-04
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-13T16:05:34Z
date_updated: 2023-03-15T13:50:00Z
department:
- _id: DEP7000
- _id: DEP1306
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
issue: '1'
keyword:
- Warehouse planning
- Layout configuration
- Labor and investment costs
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf
oa: '1'
page: 233-242
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-946856-03-0
publication_status: published
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf
status: public
title: Digitized Planning with Visualization for Warehouse Layouts
type: conference
user_id: '45673'
year: 2018
...
---
_id: '561'
abstract:
- lang: eng
text: A paradigm shift in the field of maintenance is essential for companies due
to a progressive digitalization of production processes. Therefore, the new paradigm
considersall phases of a system, from procurement, operation through to the recycling
of the machine. Initially, at the start of the cycle manufacturers of machines
and equipment have to focus on design, implementation and quality assurance in
compliance with the requirements for operation and maintenance to minimize lifecycle
cost. During operation,an efficient strategy for maintaining must be defined.
Based on the introduced paradigm a maintenance check is presented, able to provide
orientation to small and middle-sizedenterprises regarding their maintenance situation
and level. The respective level is described on basis of the degree of maturity.
Regarding further steps, it is the fundament for strategic decisions and activities.
author:
- first_name: Thomas
full_name: Glatzel, Thomas
id: '64888'
last_name: Glatzel
- first_name: Sven
full_name: Tackenberg, Sven
id: '71470'
last_name: Tackenberg
citation:
ama: 'Glatzel T, Tackenberg S. Smart Production - A Paradigm-Shift in the Field
of Maintenance. In: Villmer F-J, Padoano E, Department of Production Engineering
and Management, eds. Production Engineering and Management. Lemgo; 2018:245-255.'
apa: Glatzel, T., & Tackenberg, S. (2018). Smart Production - A Paradigm-Shift
in the Field of Maintenance. In F.-J. Villmer, E. Padoano, & Department of
Production Engineering and Management (Eds.), Production Engineering and Management
(pp. 245–255). Lemgo.
bjps: Glatzel T and Tackenberg S (2018) Smart Production - A Paradigm-Shift
in the Field of Maintenance. In Villmer F-J, Padoano E and Department of Production
Engineering and Management (eds), Production Engineering and Management.
Lemgo, pp. 245–255.
chicago: Glatzel, Thomas, and Sven Tackenberg. “Smart Production - A Paradigm-Shift
in the Field of Maintenance.” In Production Engineering and Management,
edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering
and Management, 245–55. Lemgo, 2018.
chicago-de: 'Glatzel, Thomas und Sven Tackenberg. 2018. Smart Production - A Paradigm-Shift
in the Field of Maintenance. In: Production Engineering and Management,
hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering
and Management, 245–255. Lemgo.'
din1505-2-1: 'Glatzel, Thomas ; Tackenberg, Sven: Smart Production - A
Paradigm-Shift in the Field of Maintenance. In: Villmer,
F.-J. ; Padoano, E. ; Department of Production Engineering and Management
(Hrsg.): Production Engineering and Management. Lemgo, 2018, S. 245–255'
havard: 'T. Glatzel, S. Tackenberg, Smart Production - A Paradigm-Shift in the Field
of Maintenance, in: F.-J. Villmer, E. Padoano, Department of Production Engineering
and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp.
245–255.'
ieee: T. Glatzel and S. Tackenberg, “Smart Production - A Paradigm-Shift in the
Field of Maintenance,” in Production Engineering and Management, Lemgo,
2018, no. 1, pp. 245–255.
mla: Glatzel, Thomas, and Sven Tackenberg. “Smart Production - A Paradigm-Shift
in the Field of Maintenance.” Production Engineering and Management, edited
by Franz-Josef Villmer et al., no. 1, 2018, pp. 245–55.
short: 'T. Glatzel, S. Tackenberg, in: F.-J. Villmer, E. Padoano, Department of
Production Engineering and Management (Eds.), Production Engineering and Management,
Lemgo, 2018, pp. 245–255.'
ufg: 'Glatzel, Thomas/Tackenberg, Sven (2018): Smart Production - A Paradigm-Shift
in the Field of Maintenance, in: Franz-Josef Villmer et. al. (Hgg.): Production
Engineering and Management, Lemgo, S. 245–255.'
van: 'Glatzel T, Tackenberg S. Smart Production - A Paradigm-Shift in the Field
of Maintenance. In: Villmer F-J, Padoano E, Department of Production Engineering
and Management, editors. Production Engineering and Management. Lemgo; 2018. p.
245–55.'
conference:
end_date: 2018-10-05
location: Lemgo
name: Proceedings 8th International Conference
start_date: 2018-10-04
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-13T16:11:29Z
date_updated: 2023-03-15T13:50:00Z
department:
- _id: DEP7020
- _id: DEP1305
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
issue: '1'
keyword:
- Maintenance 4.0
- Smart production
- Maintenance check
- Maintenance maturity
language:
- iso: eng
page: 245-255
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-946856-03-0
publication_status: published
status: public
title: Smart Production - A Paradigm-Shift in the Field of Maintenance
type: conference
user_id: '74004'
year: 2018
...
---
_id: '305'
abstract:
- lang: eng
text: "It is our pleasure to introduce the 8th edition of the International Conference
on Production Engineering and anagement (PEM), an event that is the result of
the joint effort of the OWL University of Applied Sciences and the University
of Trieste. The conference has been established as an annual meeting under the
Double Degree Master Program “Production Engineering and Management” by the two
partner universities. This year the conference is hosted at the university campus
in Lemgo, Germany. \r\n\r\nThe main goal of the conference is to offer students,
researchers and professionals in Germany, Italy and abroad, an opportunity to
meet and exchange information, discuss experiences, specific practices and technical
solutions for planning, design, and management of manufacturing and service systems
and processes. As always, the conference is a platform aimed at presenting research
projects, introducing young academics to the tradition of symposiums and promoting
the exchange of ideas between the industry and the academy. \r\n\r\nThis year’s
special focus is on Supply Chain Design and Management in the context of Industry
4.0, which are currently major topics of discussion among experts and professionals.
In fact, the features and problems of Industry 4.0 have been widely discussed
in the last editions of the PEM conference, in which sustainability and efficiency
also emerged as key factors. With the further study and development of Direct
Digital Manufacturing \r\ntechnologies in connection with new Management Practices
and Supply Chain Designs, the 8th edition of the PEM conference aims to offer
new and interesting scientific contributions.\r\n\r\nThe conference program includes
25 speeches organized in seven sessions. Two are specifically dedicated to “Direct
Digital Manufacturing in the context of Industry 4.0”. The other sessions are
covering areas of great interest and importance to the participants of the conference,
which are related to the main focus: “Supply Chai n Design and Management”, “Industrial
Engineering and Lean Management”, “Wood Processing Technologies and Furniture
Production”, and “Management Practices and Methodologies”. The proceedings of
the conference include the articles submitted and accepted after a careful double-blind
refereeing process."
citation:
ama: Villmer F-J, Padoano E, Department of Production Engineering and Management,
eds. Production Engineering and Management. Lemgo; 2018:306.
apa: Villmer, F.-J., Padoano, E., & Department of Production Engineering and
Management (Eds.). (2018). Production Engineering and Management (p. 306).
Presented at the 8th International Conference, Lemgo.
bjps: Villmer F-J, Padoano E and Department of Production Engineering and Management
(eds) (2018) Production Engineering and Management. Lemgo.
chicago: Villmer, Franz-Josef, Elio Padoano, and Department of Production Engineering
and Management, eds. Production Engineering and Management. Schriftenreihe
Logistik. Lemgo, 2018.
chicago-de: Villmer, Franz-Josef, Elio Padoano und Department of Production Engineering
and Management, Hrsg. 2018. Production Engineering and Management. Schriftenreihe
Logistik. Lemgo.
din1505-2-1: 'Villmer, F.-J. ; Padoano, E. ;
Department of Production Engineering and Management (Hrsg.): Production
Engineering and Management, Schriftenreihe Logistik. Lemgo, 2018'
havard: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management,
eds., Production Engineering and Management, Lemgo, 2018.
ieee: F.-J. Villmer, E. Padoano, and Department of Production Engineering and Management,
Eds., Production Engineering and Management, no. . Lemgo, 2018, p. 306.
mla: Villmer, Franz-Josef, et al., editors. Production Engineering and Management.
no. ., 2018, p. 306.
short: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management,
eds., Production Engineering and Management, Lemgo, 2018.
ufg: 'Villmer, Franz-Josef et. al. (Hgg.) (2018): Production Engineering
and Management (=Schriftenreihe Logistik), Lemgo.'
van: Villmer F-J, Padoano E, Department of Production Engineering and Management,
editors. Production Engineering and Management. Lemgo; 2018. (Schriftenreihe Logistik).
conference:
end_date: 2018-10-05
location: Lemgo
name: 8th International Conference
start_date: 2018-10-04
corporate_editor:
- ' Department of Production Engineering and Management'
- Hochschule Ostwestfalen-Lippe
date_created: 2018-12-04T15:44:29Z
date_updated: 2023-03-15T13:49:44Z
ddc:
- '650'
department:
- _id: DEP1306
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
id: '14290'
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
file:
- access_level: open_access
content_type: application/pdf
creator: hka-zn8
date_created: 2018-12-04T15:35:27Z
date_updated: 2018-12-04T15:35:27Z
file_id: '306'
file_name: PEM2018_proceedings_web.pdf
file_size: 11343767
relation: main_file
success: 1
file_date_updated: 2018-12-04T15:35:27Z
has_accepted_license: '1'
issue: .
language:
- iso: eng
oa: '1'
page: '306'
place: Lemgo
publication_identifier:
isbn:
- 978-3-946856-03-0
publication_status: published
series_title: Schriftenreihe Logistik
status: public
title: Production Engineering and Management
type: conference_editor
user_id: '68554'
year: 2018
...
---
_id: '3495'
author:
- first_name: Wilfried
full_name: Jungkind, Wilfried
id: '14059'
last_name: Jungkind
- first_name: P.
full_name: Dobrzanski, P.
last_name: Dobrzanski
citation:
ama: 'Jungkind W, Dobrzanski P. Human resources and organizational development in
the context of industry 4.0. In: Villmer F-J, Padoano E, eds. Production Engineering
and Management. Proceedings 8th International Conference. Schriftenreihe Logistik.
Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft; 2018:147-158.'
apa: 'Jungkind, W., & Dobrzanski, P. (2018). Human resources and organizational
development in the context of industry 4.0. In F.-J. Villmer & E. Padoano
(Eds.), Production Engineering and Management. Proceedings 8th International
Conference (pp. 147–158). Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich
Produktion und Wirtschaft.'
bjps: 'Jungkind W and Dobrzanski P (2018) Human Resources and Organizational
Development in the Context of Industry 4.0. In Villmer F-J and Padoano E (eds),
Production Engineering and Management. Proceedings 8th International Conference.
Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft, pp.
147–158.'
chicago: 'Jungkind, Wilfried, and P. Dobrzanski. “Human Resources and Organizational
Development in the Context of Industry 4.0.” In Production Engineering and
Management. Proceedings 8th International Conference, edited by Franz-Josef
Villmer and Elio Padoano, 147–58. Schriftenreihe Logistik. Lemgo: Hochschule Ostwestfalen-Lippe,
Fachbereich Produktion und Wirtschaft, 2018.'
chicago-de: 'Jungkind, Wilfried und P. Dobrzanski. 2018. Human resources and organizational
development in the context of industry 4.0. In: Production Engineering and
Management. Proceedings 8th International Conference, hg. von Franz-Josef
Villmer und Elio Padoano, 147–158. Schriftenreihe Logistik. Lemgo: Hochschule
Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft.'
din1505-2-1: 'Jungkind, Wilfried ;
Dobrzanski, P.: Human resources
and organizational development in the context of industry 4.0. In: Villmer,
F.-J. ; Padoano, E. (Hrsg.):
Production Engineering and Management. Proceedings 8th International Conference,
Schriftenreihe Logistik. Lemgo : Hochschule Ostwestfalen-Lippe, Fachbereich
Produktion und Wirtschaft, 2018, S. 147–158'
havard: 'W. Jungkind, P. Dobrzanski, Human resources and organizational development
in the context of industry 4.0., in: F.-J. Villmer, E. Padoano (Eds.), Production
Engineering and Management. Proceedings 8th International Conference, Hochschule
Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft, Lemgo, 2018: pp. 147–158.'
ieee: W. Jungkind and P. Dobrzanski, “Human resources and organizational development
in the context of industry 4.0.,” in Production Engineering and Management.
Proceedings 8th International Conference, Lemgo, 2018, pp. 147–158.
mla: Jungkind, Wilfried, and P. Dobrzanski. “Human Resources and Organizational
Development in the Context of Industry 4.0.” Production Engineering and Management.
Proceedings 8th International Conference, edited by Franz-Josef Villmer and
Elio Padoano, Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft,
2018, pp. 147–58.
short: 'W. Jungkind, P. Dobrzanski, in: F.-J. Villmer, E. Padoano (Eds.), Production
Engineering and Management. Proceedings 8th International Conference, Hochschule
Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft, Lemgo, 2018, pp. 147–158.'
ufg: 'Jungkind, Wilfried/Dobrzanski, P. (2018): Human resources and organizational
development in the context of industry 4.0., in: Franz-Josef Villmer/Elio Padoano
(Hgg.): Production Engineering and Management. Proceedings 8th International
Conference (=Schriftenreihe Logistik), Lemgo, S. 147–158.'
van: 'Jungkind W, Dobrzanski P. Human resources and organizational development in
the context of industry 4.0. In: Villmer F-J, Padoano E, editors. Production Engineering
and Management Proceedings 8th International Conference. Lemgo: Hochschule Ostwestfalen-Lippe,
Fachbereich Produktion und Wirtschaft; 2018. p. 147–58. (Schriftenreihe Logistik).'
conference:
end_date: 2018-10-05
location: Lemgo
name: Production Engineering and Management. Proceedings 8th International Conference
start_date: 2018-10-04
date_created: 2020-09-15T08:40:02Z
date_updated: 2023-03-15T13:49:47Z
ddc:
- '330'
department:
- _id: DEP7020
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
language:
- iso: eng
main_file_link:
- url: http://www.th-owl.de/fb7/fileadmin/download/labore/industrialengineering/pdf/Veroeffentlichungen/PEM_2014_Informal_Structures_in_Change_Projects_-_A_Hands-On_Example.pdf
page: 147 - 158
place: Lemgo
publication: Production Engineering and Management. Proceedings 8th International
Conference
publication_identifier:
isbn:
- 978-3-946856-03-0
publication_status: published
publisher: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft
series_title: Schriftenreihe Logistik
status: public
title: Human resources and organizational development in the context of industry 4.0.
type: conference
user_id: '74004'
year: 2018
...