[{"date_updated":"2024-07-17T13:02:26Z","doi":"10.1117/12.3016629","type":"conference_editor_article","editor":[{"first_name":"Georg","full_name":"von Freymann, Georg","last_name":"von Freymann"},{"last_name":"Herkommer","full_name":"Herkommer, Alois M.","first_name":"Alois M."},{"full_name":"Flury, Manuel","last_name":"Flury","first_name":"Manuel"}],"publisher":"SPIE","conference":{"location":"Strasbourg","name":"3D Printed Optics and Additive Photonic Manufacturing IV","start_date":"2024-04-08","end_date":"2024-04-09"},"abstract":[{"lang":"eng","text":"The ability to manufacture complex 3D-objects directly from its CAD model is the important reason why additive manufacturing is being widely used to fabricate cost-efficient prototypes and preferred over conventional manufacturing methods. Moreover, it portrays as a bridging technology to connect different scientific and industrial fields, e.g. Engineering, Medicine, etc. Consequently, additive manufacturing finds its applications in the production of patient-specific orthoses. This paper discusses the development of a pressure sensor based on an optical waveguide principle manufactured using stereolithography apparatus process to embed into a below-knee orthosis. For Orthopedic patients, the below-knee orthosis must be adjusted to the lower leg at regular intervals due to anthropometric changes in patient’s body to achieve proper mobility and correct load. Currently, this alteration relies on the patient’s estimation of support load which is only sub-optimal. Hence, the concept of developing an intelligent orthosis with a novel embedded optical system to monitor the exact support load at the neuralgic is proposed."}],"department":[{"_id":"DEP5020"},{"_id":"DEP6020"}],"year":"2024","user_id":"83781","status":"public","title":"Manufacturing of solid core optical waveguide based pressure sensor for 3D-printed below-knee orthosis","publication_identifier":{"isbn":["9781510673083"],"eissn":["1996-756X"],"issn":["0277-786X"],"eisbn":["9781510673090"]},"author":[{"id":"82525","last_name":"Shahane","full_name":"Shahane, Akshay Manoj","first_name":"Akshay Manoj"},{"last_name":"Shrotri","id":"74090","full_name":"Shrotri, Abhijeet Narendra","first_name":"Abhijeet Narendra","orcid":"0000-0003-2116-156X"},{"full_name":"Wittenbröker, Christian","id":"83111","last_name":"Wittenbröker","first_name":"Christian"},{"first_name":"Oliver","last_name":"Stübbe","id":"51864","full_name":"Stübbe, Oliver","orcid":"https://orcid.org/0000-0001-7293-6893"}],"intvolume":"     12995","publication_status":"published","volume":12995,"language":[{"iso":"eng"}],"date_created":"2024-06-24T08:17:52Z","citation":{"ufg":"<b>Shahane, Akshay Manoj u. a.</b>: Manufacturing of solid core optical waveguide based pressure sensor for 3D-printed below-knee orthosis, Bd. 12995, hg. von Freymann, Georg von/Herkommer, Alois M./Flury, Manuel, Bellingham, Washington, USA 2024 (Proceedings of SPIE).","chicago-de":"Shahane, Akshay Manoj, Abhijeet Narendra Shrotri, Christian Wittenbröker und Oliver Stübbe. 2024. <i>Manufacturing of solid core optical waveguide based pressure sensor for 3D-printed below-knee orthosis</i>. Hg. von Georg von Freymann, Alois M. Herkommer, und Manuel Flury. <i>3D Printed Optics and Additive Photonic Manufacturing IV</i>. Bd. 12995. Proceedings of SPIE. Bellingham, Washington, USA: SPIE. doi:<a href=\"https://doi.org/10.1117/12.3016629\">10.1117/12.3016629</a>, .","short":"A.M. Shahane, A.N. Shrotri, C. Wittenbröker, O. Stübbe, Manufacturing of Solid Core Optical Waveguide Based Pressure Sensor for 3D-Printed below-Knee Orthosis, SPIE, Bellingham, Washington, USA, 2024.","apa":"Shahane, A. M., Shrotri, A. N., Wittenbröker, C., &#38; Stübbe, O. (2024). Manufacturing of solid core optical waveguide based pressure sensor for 3D-printed below-knee orthosis. In G. von Freymann, A. M. Herkommer, &#38; M. Flury (Eds.), <i>3D Printed Optics and Additive Photonic Manufacturing IV</i> (Vol. 12995). SPIE. <a href=\"https://doi.org/10.1117/12.3016629\">https://doi.org/10.1117/12.3016629</a>","mla":"Shahane, Akshay Manoj, et al. “Manufacturing of Solid Core Optical Waveguide Based Pressure Sensor for 3D-Printed below-Knee Orthosis.” <i>3D Printed Optics and Additive Photonic Manufacturing IV</i>, edited by Georg von Freymann et al., vol. 12995, SPIE, 2024, <a href=\"https://doi.org/10.1117/12.3016629\">https://doi.org/10.1117/12.3016629</a>.","havard":"A.M. Shahane, A.N. Shrotri, C. Wittenbröker, O. Stübbe, Manufacturing of solid core optical waveguide based pressure sensor for 3D-printed below-knee orthosis, SPIE, Bellingham, Washington, USA, 2024.","chicago":"Shahane, Akshay Manoj, Abhijeet Narendra Shrotri, Christian Wittenbröker, and Oliver Stübbe. <i>Manufacturing of Solid Core Optical Waveguide Based Pressure Sensor for 3D-Printed below-Knee Orthosis</i>. Edited by Georg von Freymann, Alois M. Herkommer, and Manuel Flury. <i>3D Printed Optics and Additive Photonic Manufacturing IV</i>. Vol. 12995. Proceedings of SPIE. Bellingham, Washington, USA: SPIE, 2024. <a href=\"https://doi.org/10.1117/12.3016629\">https://doi.org/10.1117/12.3016629</a>.","bjps":"<b>Shahane AM <i>et al.</i></b> (2024) <i>Manufacturing of Solid Core Optical Waveguide Based Pressure Sensor for 3D-Printed below-Knee Orthosis</i>, von Freymann G, Herkommer AM and Flury M (eds). Bellingham, Washington, USA: SPIE.","din1505-2-1":"<span style=\"font-variant:small-caps;\">Shahane, Akshay Manoj</span> ; <span style=\"font-variant:small-caps;\">Shrotri, Abhijeet Narendra</span> ; <span style=\"font-variant:small-caps;\">Wittenbröker, Christian</span> ; <span style=\"font-variant:small-caps;\">Stübbe, Oliver</span> ; <span style=\"font-variant:small-caps;\">von Freymann, G.</span> ; <span style=\"font-variant:small-caps;\">Herkommer, A. M.</span> ; <span style=\"font-variant:small-caps;\">Flury, M.</span> (Hrsg.): <i>Manufacturing of solid core optical waveguide based pressure sensor for 3D-printed below-knee orthosis</i>, <i>Proceedings of SPIE</i>. Bd. 12995. Bellingham, Washington, USA : SPIE, 2024","van":"Shahane AM, Shrotri AN, Wittenbröker C, Stübbe O. Manufacturing of solid core optical waveguide based pressure sensor for 3D-printed below-knee orthosis. von Freymann G, Herkommer AM, Flury M, editors. 3D Printed Optics and Additive Photonic Manufacturing IV. Bellingham, Washington, USA: SPIE; 2024. (Proceedings of SPIE; vol. 12995).","ama":"Shahane AM, Shrotri AN, Wittenbröker C, Stübbe O. <i>Manufacturing of Solid Core Optical Waveguide Based Pressure Sensor for 3D-Printed below-Knee Orthosis</i>. Vol 12995. (von Freymann G, Herkommer AM, Flury M, eds.). SPIE; 2024. doi:<a href=\"https://doi.org/10.1117/12.3016629\">10.1117/12.3016629</a>","ieee":"A. M. Shahane, A. N. Shrotri, C. Wittenbröker, and O. Stübbe, <i>Manufacturing of solid core optical waveguide based pressure sensor for 3D-printed below-knee orthosis</i>, vol. 12995. Bellingham, Washington, USA: SPIE, 2024. doi: <a href=\"https://doi.org/10.1117/12.3016629\">10.1117/12.3016629</a>."},"place":"Bellingham, Washington, USA","_id":"11595","series_title":"Proceedings of SPIE","publication":"3D Printed Optics and Additive Photonic Manufacturing IV"},{"series_title":"Proceedings of SPIE","publication":"Laser 3D Manufacturing VIII","_id":"7670","publication_identifier":{"isbn":["978-1-5106-4189-1"],"eissn":["1996-756X"],"issn":["0277-786X"],"eisbn":["978-1-5106-4190-7"]},"author":[{"orcid":"0000-0003-2116-156X","first_name":"Abhijeet Narendra","full_name":"Shrotri, Abhijeet Narendra","id":"74090","last_name":"Shrotri"},{"full_name":"Beyer, Micha","last_name":"Beyer","id":"71403","first_name":"Micha"},{"id":"71057","last_name":"Schneider","full_name":"Schneider, Daniel Johann","first_name":"Daniel Johann"},{"last_name":"Stübbe","id":"51864","full_name":"Stübbe, Oliver","first_name":"Oliver","orcid":"https://orcid.org/0000-0001-7293-6893"}],"intvolume":"     11677","language":[{"iso":"eng"}],"date_created":"2022-04-19T10:20:55Z","volume":11677,"publication_status":"published","place":"San Francisco","citation":{"havard":"A.N. Shrotri, M. Beyer, D.J. Schneider, O. Stübbe, Manufacturing of lens array prototypes containing spherical and fresnel lenses for visible light communications using stereolithography apparatus, Society of Photo-Optical Instrumentation Engineers, San Francisco, 2021.","mla":"Shrotri, Abhijeet Narendra, et al. “Manufacturing of Lens Array Prototypes Containing Spherical and Fresnel Lenses for Visible Light Communications Using Stereolithography Apparatus.” <i>Laser 3D Manufacturing VIII</i>, edited by Henry Helvajian et al., vol. 11677, Society of Photo-Optical Instrumentation Engineers, 2021, <a href=\"https://doi.org/10.1117/12.2586907\">https://doi.org/10.1117/12.2586907</a>.","apa":"Shrotri, A. N., Beyer, M., Schneider, D. J., &#38; Stübbe, O. (2021). Manufacturing of lens array prototypes containing spherical and fresnel lenses for visible light communications using stereolithography apparatus. In H. Helvajian, B. Gu, &#38; H. Chen (Eds.), <i>Laser 3D Manufacturing VIII</i> (Vol. 11677). Society of Photo-Optical Instrumentation Engineers. <a href=\"https://doi.org/10.1117/12.2586907\">https://doi.org/10.1117/12.2586907</a>","short":"A.N. Shrotri, M. Beyer, D.J. Schneider, O. Stübbe, Manufacturing of Lens Array Prototypes Containing Spherical and Fresnel Lenses for Visible Light Communications Using Stereolithography Apparatus, Society of Photo-Optical Instrumentation Engineers, San Francisco, 2021.","chicago-de":"Shrotri, Abhijeet Narendra, Micha Beyer, Daniel Johann Schneider und Oliver Stübbe. 2021. <i>Manufacturing of lens array prototypes containing spherical and fresnel lenses for visible light communications using stereolithography apparatus</i>. Hg. von Henry Helvajian, Bo Gu, und Hongqiang Chen. <i>Laser 3D Manufacturing VIII</i>. Bd. 11677. Proceedings of SPIE. San Francisco: Society of Photo-Optical Instrumentation Engineers. doi:<a href=\"https://doi.org/10.1117/12.2586907\">10.1117/12.2586907</a>, .","ufg":"<b>Shrotri, Abhijeet Narendra u. a.</b>: Manufacturing of lens array prototypes containing spherical and fresnel lenses for visible light communications using stereolithography apparatus, Bd. 11677, hg. von Helvajian, Henry/Gu, Bo/Chen, Hongqiang, San Francisco 2021 (Proceedings of SPIE).","ieee":"A. N. Shrotri, M. Beyer, D. J. Schneider, and O. Stübbe, <i>Manufacturing of lens array prototypes containing spherical and fresnel lenses for visible light communications using stereolithography apparatus</i>, vol. 11677. San Francisco: Society of Photo-Optical Instrumentation Engineers, 2021. doi: <a href=\"https://doi.org/10.1117/12.2586907\">10.1117/12.2586907</a>.","ama":"Shrotri AN, Beyer M, Schneider DJ, Stübbe O. <i>Manufacturing of Lens Array Prototypes Containing Spherical and Fresnel Lenses for Visible Light Communications Using Stereolithography Apparatus</i>. Vol 11677. (Helvajian H, Gu B, Chen H, eds.). Society of Photo-Optical Instrumentation Engineers; 2021. doi:<a href=\"https://doi.org/10.1117/12.2586907\">10.1117/12.2586907</a>","van":"Shrotri AN, Beyer M, Schneider DJ, Stübbe O. Manufacturing of lens array prototypes containing spherical and fresnel lenses for visible light communications using stereolithography apparatus. Helvajian H, Gu B, Chen H, editors. Laser 3D Manufacturing VIII. San Francisco: Society of Photo-Optical Instrumentation Engineers; 2021. (Proceedings of SPIE; vol. 11677).","din1505-2-1":"<span style=\"font-variant:small-caps;\">Shrotri, Abhijeet Narendra</span> ; <span style=\"font-variant:small-caps;\">Beyer, Micha</span> ; <span style=\"font-variant:small-caps;\">Schneider, Daniel Johann</span> ; <span style=\"font-variant:small-caps;\">Stübbe, Oliver</span> ; <span style=\"font-variant:small-caps;\">Helvajian, H.</span> ; <span style=\"font-variant:small-caps;\">Gu, B.</span> ; <span style=\"font-variant:small-caps;\">Chen, H.</span> (Hrsg.): <i>Manufacturing of lens array prototypes containing spherical and fresnel lenses for visible light communications using stereolithography apparatus</i>, <i>Proceedings of SPIE</i>. Bd. 11677. San Francisco : Society of Photo-Optical Instrumentation Engineers, 2021","bjps":"<b>Shrotri AN <i>et al.</i></b> (2021) <i>Manufacturing of Lens Array Prototypes Containing Spherical and Fresnel Lenses for Visible Light Communications Using Stereolithography Apparatus</i>, Helvajian H, Gu B and Chen H (eds). San Francisco: Society of Photo-Optical Instrumentation Engineers.","chicago":"Shrotri, Abhijeet Narendra, Micha Beyer, Daniel Johann Schneider, and Oliver Stübbe. <i>Manufacturing of Lens Array Prototypes Containing Spherical and Fresnel Lenses for Visible Light Communications Using Stereolithography Apparatus</i>. Edited by Henry Helvajian, Bo Gu, and Hongqiang Chen. <i>Laser 3D Manufacturing VIII</i>. Vol. 11677. Proceedings of SPIE. San Francisco: Society of Photo-Optical Instrumentation Engineers, 2021. <a href=\"https://doi.org/10.1117/12.2586907\">https://doi.org/10.1117/12.2586907</a>."},"title":"Manufacturing of lens array prototypes containing spherical and fresnel lenses for visible light communications using stereolithography apparatus","main_file_link":[{"url":"https://doi.org/10.1117/12.2586907"}],"department":[{"_id":"DEP5020"},{"_id":"DEP6020"},{"_id":"DEP5000"}],"user_id":"51864","year":"2021","status":"public","keyword":["Additive manufacturing","3D printing","Stereolithography apparatus","Spherical lenses","Fresnel lenses","Visible light communication"],"conference":{"end_date":"2021-02-02","start_date":"2021-01-28","name":"SPIE Photonics West LASE Proc. SPIE 11677, Laser 3D Manufacturing VIII, 1167717","location":"San Francisco "},"abstract":[{"lang":"eng","text":"Additive manufacturing (AM) and rapid prototyping process (RPP) have revolutionized the production of 3D objects in the last few decades. RPP has considerably increased the rate of production and the possibility of manufacturing prototypes in the fields of electrical, optical, and mechanical engineering. The manufacturing of optical prototypes including spherical, aspheric, and special kinds of lenses and lens arrays has reformed the fabrication of optical components. In this paper, specifically designed lens array prototypes for application in visible light communication (VLC) are introduced. These lens array prototypes are manufactured using the stereolithography apparatus (SLA) process. These lens arrays are designed to achieve optimal transmission of the light beam for VLC systems. One of the prototypes from the lens arrays contains primarily four spherical lenses and one thicker convex lens and the other contains one fresnel lens as a substitute for thicker convex lens. These lens arrays are further post-processed to achieve the required transparency. These lens array prototypes are tested using laser and LEDs. The ON-OFF keying modulated light beam was transmitted through the lens array at the sender side and focused on the photo-receiver using another lens array at the receiver side which is 200 cm apart. After evaluating these lens prototypes, it can be concluded that with appropriate post-processing and high-resolution stereolithography based manufacturing, a low data rate VLC link can be formed."}],"type":"conference_editor_article","publisher":"Society of Photo-Optical Instrumentation Engineers","editor":[{"full_name":"Helvajian, Henry","last_name":"Helvajian","first_name":"Henry"},{"last_name":"Gu","full_name":"Gu, Bo","first_name":"Bo"},{"first_name":"Hongqiang","last_name":"Chen","full_name":"Chen, Hongqiang"}],"doi":"10.1117/12.2586907","date_updated":"2024-04-19T11:54:33Z"},{"abstract":[{"lang":"eng","text":"Visible light communication (VLC) allows the dual use of lighting and wireless communication systems by\r\nmodulation of illumination devices. However, to increase the performance, typically, beam-forming measures are\r\ntaken creating pencil beams, thus contradicting the illumination purpose. In order to optimize the performance\r\ntrade o\u000b between e\u000ecient illumination and communication, the switching capabilities of illumination LEDs are\r\nexamined. Illumination LEDs with standard drivers and without beam-forming show limited applicability for\r\ncommunication purposes as they are not optimized for the necessary switching capability (f \u0019 11 MHz) and\r\ncoherence. Methods to enhance the electrical current by pre-equalisation, biasing, carrier sweeping and current\r\nshaping are examined in respect to the illumination LED's communication performance. A novel driver scheme\r\nis derived which achieves considerably higher switching frequencies (f \u0015 100 MHz) without employing beamforming\r\nat the illumination LED. This driver is able to obtain a data rate of up to 200 Mbit/s at a distance of\r\n3.2 m, using on-o\u000b keying (OOK) modulation technique. Therefore, it is feasible to apply the LED driver by\r\nimplementing standardised illumination devices in VLC systems."}],"conference":{"name":"Integrated Optics: Design, Devices, Systems and Applications ; SPIE Optics + Optoelectronics Digital Forum ","start_date":"2021-04-19","end_date":"2021-04-23","location":"Online (Prag)"},"keyword":["Optical Wireless Communication","Visible Light Communication","VLC","Li-Fi","Illumination","Dual-purpose drivers"],"status":"public","year":"2021","user_id":"51864","department":[{"_id":"DEP5020"},{"_id":"DEP6020"},{"_id":"DEP5000"}],"date_updated":"2024-04-19T12:53:36Z","doi":"10.1117/12.2588923","publisher":"SPIE","editor":[{"first_name":"Pavel","full_name":"Cheben, Pavel","last_name":"Cheben"},{"full_name":"Čtyroký, Jiří","last_name":"Čtyroký","first_name":"Jiří"},{"full_name":"Molina-Fernández, Iñigo","last_name":"Molina-Fernández","first_name":"Iñigo"}],"type":"conference","_id":"7672","publication":"Integrated Optics: Design, Devices, Systems and Applications VI","series_title":"Proceedings of SPIE","title":"Efficient visible light communication drivers using illumination LEDs in industrial environments","place":"Bellingham, Washington, USA","citation":{"bjps":"<b>Schneider D <i>et al.</i></b> (2021) Efficient Visible Light Communication Drivers Using Illumination LEDs in Industrial Environments. In Cheben P, Čtyroký J and Molina-Fernández I (eds), <i>Integrated Optics: Design, Devices, Systems and Applications VI</i>, vol. 11775. Bellingham, Washington, USA: SPIE.","short":"D. Schneider, A.N. Shrotri, H. Flatt, O. Stübbe, R. Lachmayer, in: P. Cheben, J. Čtyroký, I. Molina-Fernández (Eds.), Integrated Optics: Design, Devices, Systems and Applications VI, SPIE, Bellingham, Washington, USA, 2021.","mla":"Schneider, Daniel, et al. “Efficient Visible Light Communication Drivers Using Illumination LEDs in Industrial Environments.” <i>Integrated Optics: Design, Devices, Systems and Applications VI</i>, edited by Pavel Cheben et al., vol. 11775, SPIE, 2021, <a href=\"https://doi.org/10.1117/12.2588923\">https://doi.org/10.1117/12.2588923</a>.","apa":"Schneider, D., Shrotri, A. N., Flatt, H., Stübbe, O., &#38; Lachmayer, R. (2021). Efficient visible light communication drivers using illumination LEDs in industrial environments. In P. Cheben, J. Čtyroký, &#38; I. Molina-Fernández (Eds.), <i>Integrated Optics: Design, Devices, Systems and Applications VI</i> (Vol. 11775). SPIE. <a href=\"https://doi.org/10.1117/12.2588923\">https://doi.org/10.1117/12.2588923</a>","din1505-2-1":"<span style=\"font-variant:small-caps;\">Schneider, Daniel</span> ; <span style=\"font-variant:small-caps;\">Shrotri, Abhijeet Narendra</span> ; <span style=\"font-variant:small-caps;\">Flatt, Holger</span> ; <span style=\"font-variant:small-caps;\">Stübbe, Oliver</span> ; <span style=\"font-variant:small-caps;\">Lachmayer, Roland</span>: Efficient visible light communication drivers using illumination LEDs in industrial environments. In: <span style=\"font-variant:small-caps;\">Cheben, P.</span> ; <span style=\"font-variant:small-caps;\">Čtyroký, J.</span> ; <span style=\"font-variant:small-caps;\">Molina-Fernández, I.</span> (Hrsg.): <i>Integrated Optics: Design, Devices, Systems and Applications VI</i>, <i>Proceedings of SPIE</i>. Bd. 11775. Bellingham, Washington, USA : SPIE, 2021","ufg":"<b>Schneider, Daniel u. a.</b>: Efficient visible light communication drivers using illumination LEDs in industrial environments, in: <i>Cheben, Pavel/Čtyroký, Jiří/Molina-Fernández, Iñigo (Hgg.)</i>: Integrated Optics: Design, Devices, Systems and Applications VI, Bd. 11775, Bellingham, Washington, USA 2021 (Proceedings of SPIE).","chicago-de":"Schneider, Daniel, Abhijeet Narendra Shrotri, Holger Flatt, Oliver Stübbe und Roland Lachmayer. 2021. Efficient visible light communication drivers using illumination LEDs in industrial environments. In: <i>Integrated Optics: Design, Devices, Systems and Applications VI</i>, hg. von Pavel Cheben, Jiří Čtyroký, und Iñigo Molina-Fernández, 11775:. Proceedings of SPIE. Bellingham, Washington, USA: SPIE. doi:<a href=\"https://doi.org/10.1117/12.2588923\">10.1117/12.2588923</a>, .","chicago":"Schneider, Daniel, Abhijeet Narendra Shrotri, Holger Flatt, Oliver Stübbe, and Roland Lachmayer. “Efficient Visible Light Communication Drivers Using Illumination LEDs in Industrial Environments.” In <i>Integrated Optics: Design, Devices, Systems and Applications VI</i>, edited by Pavel Cheben, Jiří Čtyroký, and Iñigo Molina-Fernández, Vol. 11775. Proceedings of SPIE. Bellingham, Washington, USA: SPIE, 2021. <a href=\"https://doi.org/10.1117/12.2588923\">https://doi.org/10.1117/12.2588923</a>.","havard":"D. Schneider, A.N. Shrotri, H. Flatt, O. Stübbe, R. Lachmayer, Efficient visible light communication drivers using illumination LEDs in industrial environments, in: P. Cheben, J. Čtyroký, I. Molina-Fernández (Eds.), Integrated Optics: Design, Devices, Systems and Applications VI, SPIE, Bellingham, Washington, USA, 2021.","ieee":"D. Schneider, A. N. Shrotri, H. Flatt, O. Stübbe, and R. Lachmayer, “Efficient visible light communication drivers using illumination LEDs in industrial environments,” in <i>Integrated Optics: Design, Devices, Systems and Applications VI</i>, Online (Prag), 2021, vol. 11775. doi: <a href=\"https://doi.org/10.1117/12.2588923\">10.1117/12.2588923</a>.","ama":"Schneider D, Shrotri AN, Flatt H, Stübbe O, Lachmayer R. Efficient visible light communication drivers using illumination LEDs in industrial environments. In: Cheben P, Čtyroký J, Molina-Fernández I, eds. <i>Integrated Optics: Design, Devices, Systems and Applications VI</i>. Vol 11775. Proceedings of SPIE. SPIE; 2021. doi:<a href=\"https://doi.org/10.1117/12.2588923\">10.1117/12.2588923</a>","van":"Schneider D, Shrotri AN, Flatt H, Stübbe O, Lachmayer R. Efficient visible light communication drivers using illumination LEDs in industrial environments. In: Cheben P, Čtyroký J, Molina-Fernández I, editors. Integrated Optics: Design, Devices, Systems and Applications VI. Bellingham, Washington, USA: SPIE; 2021. (Proceedings of SPIE; vol. 11775)."},"date_created":"2022-04-19T10:23:26Z","language":[{"iso":"eng"}],"volume":11775,"publication_status":"published","author":[{"full_name":"Schneider, Daniel","id":"82849","last_name":"Schneider","first_name":"Daniel"},{"first_name":"Abhijeet Narendra","id":"74090","last_name":"Shrotri","full_name":"Shrotri, Abhijeet Narendra","orcid":"0000-0003-2116-156X"},{"full_name":"Flatt, Holger","last_name":"Flatt","id":"58494","first_name":"Holger"},{"first_name":"Oliver","id":"51864","last_name":"Stübbe","full_name":"Stübbe, Oliver","orcid":"https://orcid.org/0000-0001-7293-6893"},{"first_name":"Roland","last_name":"Lachmayer","full_name":"Lachmayer, Roland"}],"intvolume":"     11775","publication_identifier":{"eisbn":["978-1-5106-4385-7 "],"eissn":["1996-756X"],"issn":["0277-786X"],"isbn":["978-1-5106-4384-0"]}},{"status":"public","year":"2020","user_id":"51864","department":[{"_id":"DEP5020"},{"_id":"DEP6020"},{"_id":"DEP5000"}],"conference":{"location":"Strasbourg (online)","start_date":"2020-04-06","end_date":"2020-04-10","name":"3D Printed Optics and Additive Photonic Manufacturing ; SPIE Photonics Europe - Digital Forum"},"keyword":["Fresnel lenses","Stereolithography apparatus","3D printing","Photo-polymerization"],"publisher":"SPIE","editor":[{"full_name":"von Freymann, Georg","last_name":"von Freymann","first_name":"Georg"},{"last_name":"Herkommer","full_name":"Herkommer, Alois M.","first_name":"Alois M."},{"full_name":"Flury, Manuel","last_name":"Flury","first_name":"Manuel"}],"type":"conference_editor_article","date_updated":"2024-04-19T12:02:02Z","doi":"10.1117/12.2555367","publication":"3D Printed Optics and Additive Photonic Manufacturing II : 6-10 April 2020, online only, France ","series_title":" Proceedings of SPIE","_id":"7676","place":"Bellingham, Washington, USA","citation":{"ufg":"<b>Shrotri, Abhijeet Narendra/Beyer, Micha/Stübbe, Oliver</b>: Manufacturing and analyzing of cost-efficient fresnel lenses using stereolithography, Bd. 11349, hg. von Freymann, Georg von/Herkommer, Alois M./Flury, Manuel, Bellingham, Washington, USA 2020 ( Proceedings of SPIE).","chicago-de":"Shrotri, Abhijeet Narendra, Micha Beyer und Oliver Stübbe. 2020. <i>Manufacturing and analyzing of cost-efficient fresnel lenses using stereolithography</i>. Hg. von Georg von Freymann, Alois M. Herkommer, und Manuel Flury. <i>3D Printed Optics and Additive Photonic Manufacturing II : 6-10 April 2020, online only, France </i>. Bd. 11349.  Proceedings of SPIE. Bellingham, Washington, USA: SPIE. doi:<a href=\"https://doi.org/10.1117/12.2555367\">10.1117/12.2555367</a>, .","chicago":"Shrotri, Abhijeet Narendra, Micha Beyer, and Oliver Stübbe. <i>Manufacturing and Analyzing of Cost-Efficient Fresnel Lenses Using Stereolithography</i>. Edited by Georg von Freymann, Alois M. Herkommer, and Manuel Flury. <i>3D Printed Optics and Additive Photonic Manufacturing II : 6-10 April 2020, Online Only, France </i>. Vol. 11349.  Proceedings of SPIE. Bellingham, Washington, USA: SPIE, 2020. <a href=\"https://doi.org/10.1117/12.2555367\">https://doi.org/10.1117/12.2555367</a>.","short":"A.N. Shrotri, M. Beyer, O. Stübbe, Manufacturing and Analyzing of Cost-Efficient Fresnel Lenses Using Stereolithography, SPIE, Bellingham, Washington, USA, 2020.","bjps":"<b>Shrotri AN, Beyer M and Stübbe O</b> (2020) <i>Manufacturing and Analyzing of Cost-Efficient Fresnel Lenses Using Stereolithography</i>, von Freymann G, Herkommer AM and Flury M (eds). Bellingham, Washington, USA: SPIE.","mla":"Shrotri, Abhijeet Narendra, et al. “Manufacturing and Analyzing of Cost-Efficient Fresnel Lenses Using Stereolithography.” <i>3D Printed Optics and Additive Photonic Manufacturing II : 6-10 April 2020, Online Only, France </i>, edited by Georg von Freymann et al., vol. 11349, SPIE, 2020, <a href=\"https://doi.org/10.1117/12.2555367\">https://doi.org/10.1117/12.2555367</a>.","apa":"Shrotri, A. N., Beyer, M., &#38; Stübbe, O. (2020). Manufacturing and analyzing of cost-efficient fresnel lenses using stereolithography. In G. von Freymann, A. M. Herkommer, &#38; M. Flury (Eds.), <i>3D Printed Optics and Additive Photonic Manufacturing II : 6-10 April 2020, online only, France </i> (Vol. 11349). SPIE. <a href=\"https://doi.org/10.1117/12.2555367\">https://doi.org/10.1117/12.2555367</a>","din1505-2-1":"<span style=\"font-variant:small-caps;\">Shrotri, Abhijeet Narendra</span> ; <span style=\"font-variant:small-caps;\">Beyer, Micha</span> ; <span style=\"font-variant:small-caps;\">Stübbe, Oliver</span> ; <span style=\"font-variant:small-caps;\">von Freymann, G.</span> ; <span style=\"font-variant:small-caps;\">Herkommer, A. M.</span> ; <span style=\"font-variant:small-caps;\">Flury, M.</span> (Hrsg.): <i>Manufacturing and analyzing of cost-efficient fresnel lenses using stereolithography</i>, <i> Proceedings of SPIE</i>. Bd. 11349. Bellingham, Washington, USA : SPIE, 2020","ama":"Shrotri AN, Beyer M, Stübbe O. <i>Manufacturing and Analyzing of Cost-Efficient Fresnel Lenses Using Stereolithography</i>. Vol 11349. (von Freymann G, Herkommer AM, Flury M, eds.). SPIE; 2020. doi:<a href=\"https://doi.org/10.1117/12.2555367\">10.1117/12.2555367</a>","van":"Shrotri AN, Beyer M, Stübbe O. Manufacturing and analyzing of cost-efficient fresnel lenses using stereolithography. von Freymann G, Herkommer AM, Flury M, editors. 3D Printed Optics and Additive Photonic Manufacturing II : 6-10 April 2020, online only, France . Bellingham, Washington, USA: SPIE; 2020. ( Proceedings of SPIE; vol. 11349).","havard":"A.N. Shrotri, M. Beyer, O. Stübbe, Manufacturing and analyzing of cost-efficient fresnel lenses using stereolithography, SPIE, Bellingham, Washington, USA, 2020.","ieee":"A. N. Shrotri, M. Beyer, and O. Stübbe, <i>Manufacturing and analyzing of cost-efficient fresnel lenses using stereolithography</i>, vol. 11349. Bellingham, Washington, USA: SPIE, 2020. doi: <a href=\"https://doi.org/10.1117/12.2555367\">10.1117/12.2555367</a>."},"date_created":"2022-04-19T10:46:32Z","language":[{"iso":"eng"}],"publication_status":"published","volume":11349,"author":[{"orcid":"0000-0003-2116-156X","first_name":"Abhijeet Narendra","full_name":"Shrotri, Abhijeet Narendra","last_name":"Shrotri","id":"74090"},{"first_name":"Micha","full_name":"Beyer, Micha","last_name":"Beyer","id":"71403"},{"last_name":"Stübbe","id":"51864","full_name":"Stübbe, Oliver","first_name":"Oliver","orcid":"https://orcid.org/0000-0001-7293-6893"}],"intvolume":"     11349","publication_identifier":{"eisbn":[" 978-1-5106-3471-8 "],"eissn":["1996-756X"],"issn":["0277-786X"],"isbn":["978-1-5106-3470-1"]},"title":"Manufacturing and analyzing of cost-efficient fresnel lenses using stereolithography"},{"status":"public","department":[{"_id":"DEP5020"},{"_id":"DEP6020"}],"user_id":"51864","year":"2018","conference":{"end_date":"2018-04-26","start_date":"2018-04-22","name":"SPIE Photonics Europe","location":"Strasbourg, France"},"publisher":"SPIE","editor":[{"last_name":"von Freymann","full_name":"von Freymann, Georg","first_name":"Georg"},{"last_name":"Herkommer","full_name":"Herkommer, Alois M.","first_name":"Alois M."},{"first_name":"Manuel","full_name":"Flury, Manuel","last_name":"Flury"}],"type":"conference_editor_article","doi":"10.1117/12.2306910","date_updated":"2024-04-19T11:49:25Z","publication":"3D Printed Optics and Additive Photonic Manufacturing","series_title":"Proceedings of SPIE","_id":"11134","language":[{"iso":"eng"}],"date_created":"2024-02-29T17:21:32Z","publication_status":"published","volume":10675,"citation":{"ufg":"<b>Stübbe, Oliver/Huxol, Andrea/Villmer, Franz-Josef</b>: Applying fused layer modeling technologies to print embedded 3D optical waveguide structures for communication and sensor applications, Bd. 10675, hg. von Freymann, Georg von/Herkommer, Alois M./Flury, Manuel, o. O. 2018 (Proceedings of SPIE).","chicago-de":"Stübbe, Oliver, Andrea Huxol und Franz-Josef Villmer. 2018. <i>Applying fused layer modeling technologies to print embedded 3D optical waveguide structures for communication and sensor applications</i>. Hg. von Georg von Freymann, Alois M. Herkommer, und Manuel Flury. <i>3D Printed Optics and Additive Photonic Manufacturing</i>. Bd. 10675. Proceedings of SPIE. SPIE. doi:<a href=\"https://doi.org/10.1117/12.2306910\">10.1117/12.2306910</a>, .","short":"O. Stübbe, A. Huxol, F.-J. Villmer, Applying Fused Layer Modeling Technologies to Print Embedded 3D Optical Waveguide Structures for Communication and Sensor Applications, SPIE, 2018.","mla":"Stübbe, Oliver, et al. “Applying Fused Layer Modeling Technologies to Print Embedded 3D Optical Waveguide Structures for Communication and Sensor Applications.” <i>3D Printed Optics and Additive Photonic Manufacturing</i>, edited by Georg von Freymann et al., vol. 10675, SPIE, 2018, <a href=\"https://doi.org/10.1117/12.2306910\">https://doi.org/10.1117/12.2306910</a>.","apa":"Stübbe, O., Huxol, A., &#38; Villmer, F.-J. (2018). Applying fused layer modeling technologies to print embedded 3D optical waveguide structures for communication and sensor applications. In G. von Freymann, A. M. Herkommer, &#38; M. Flury (Eds.), <i>3D Printed Optics and Additive Photonic Manufacturing</i> (Vol. 10675). SPIE. <a href=\"https://doi.org/10.1117/12.2306910\">https://doi.org/10.1117/12.2306910</a>","havard":"O. Stübbe, A. Huxol, F.-J. Villmer, Applying fused layer modeling technologies to print embedded 3D optical waveguide structures for communication and sensor applications, SPIE, 2018.","chicago":"Stübbe, Oliver, Andrea Huxol, and Franz-Josef Villmer. <i>Applying Fused Layer Modeling Technologies to Print Embedded 3D Optical Waveguide Structures for Communication and Sensor Applications</i>. Edited by Georg von Freymann, Alois M. Herkommer, and Manuel Flury. <i>3D Printed Optics and Additive Photonic Manufacturing</i>. Vol. 10675. Proceedings of SPIE. SPIE, 2018. <a href=\"https://doi.org/10.1117/12.2306910\">https://doi.org/10.1117/12.2306910</a>.","bjps":"<b>Stübbe O, Huxol A and Villmer F-J</b> (2018) <i>Applying Fused Layer Modeling Technologies to Print Embedded 3D Optical Waveguide Structures for Communication and Sensor Applications</i>, von Freymann G, Herkommer AM and Flury M (eds). SPIE.","din1505-2-1":"<span style=\"font-variant:small-caps;\">Stübbe, Oliver</span> ; <span style=\"font-variant:small-caps;\">Huxol, Andrea</span> ; <span style=\"font-variant:small-caps;\">Villmer, Franz-Josef</span> ; <span style=\"font-variant:small-caps;\">von Freymann, G.</span> ; <span style=\"font-variant:small-caps;\">Herkommer, A. M.</span> ; <span style=\"font-variant:small-caps;\">Flury, M.</span> (Hrsg.): <i>Applying fused layer modeling technologies to print embedded 3D optical waveguide structures for communication and sensor applications</i>, <i>Proceedings of SPIE</i>. Bd. 10675 : SPIE, 2018","ama":"Stübbe O, Huxol A, Villmer FJ. <i>Applying Fused Layer Modeling Technologies to Print Embedded 3D Optical Waveguide Structures for Communication and Sensor Applications</i>. Vol 10675. (von Freymann G, Herkommer AM, Flury M, eds.). SPIE; 2018. doi:<a href=\"https://doi.org/10.1117/12.2306910\">10.1117/12.2306910</a>","van":"Stübbe O, Huxol A, Villmer FJ. Applying fused layer modeling technologies to print embedded 3D optical waveguide structures for communication and sensor applications. von Freymann G, Herkommer AM, Flury M, editors. 3D Printed Optics and Additive Photonic Manufacturing. SPIE; 2018. (Proceedings of SPIE; vol. 10675).","ieee":"O. Stübbe, A. Huxol, and F.-J. Villmer, <i>Applying fused layer modeling technologies to print embedded 3D optical waveguide structures for communication and sensor applications</i>, vol. 10675. SPIE, 2018. doi: <a href=\"https://doi.org/10.1117/12.2306910\">10.1117/12.2306910</a>."},"publication_identifier":{"eisbn":["978-1-5106-1877-0"],"eissn":["1996-756X"],"unknown":["978-1-5106-1876-3"],"issn":["0277-786X"]},"author":[{"orcid":"https://orcid.org/0000-0001-7293-6893","first_name":"Oliver","full_name":"Stübbe, Oliver","last_name":"Stübbe","id":"51864"},{"first_name":"Andrea","last_name":"Huxol","id":"43559","full_name":"Huxol, Andrea"},{"last_name":"Villmer","id":"14290","full_name":"Villmer, Franz-Josef","first_name":"Franz-Josef"}],"intvolume":"     10675","title":"Applying fused layer modeling technologies to print embedded 3D optical waveguide structures for communication and sensor applications"},{"title":"Modeling, simulation and measurement of a bidirectional optical interconnection system for industrial applications","publication_identifier":{"issn":["0277-786X"]},"author":[{"first_name":"Marc","full_name":"Neu, Marc","last_name":"Neu"},{"full_name":"Grünberg, Olaf","last_name":"Grünberg","first_name":"Olaf"},{"first_name":"Tobias","full_name":"Christophliemke, Tobias","id":"44221","last_name":"Christophliemke"},{"id":"51864","last_name":"Stübbe","full_name":"Stübbe, Oliver","first_name":"Oliver","orcid":"https://orcid.org/0000-0001-7293-6893"}],"intvolume":"     10109","date_created":"2023-08-17T11:24:46Z","language":[{"iso":"eng"}],"volume":10109,"publication_status":"published","place":"Bellingham, Wash.","citation":{"havard":"M. Neu, O. Grünberg, T. Christophliemke, O. Stübbe, Modeling, simulation and measurement of a bidirectional optical interconnection system for industrial applications, in: H. Schröder, R.T. Chen (Eds.), Optical Interconnects XVII, SPIE, Bellingham, Wash., 2017.","chicago-de":"Neu, Marc, Olaf Grünberg, Tobias Christophliemke und Oliver Stübbe. 2017. Modeling, simulation and measurement of a bidirectional optical interconnection system for industrial applications. In: <i>Optical Interconnects XVII</i>, hg. von Henning Schröder und Ray T. Chen, 10109:. Proceedings of SPIE . Bellingham, Wash.: SPIE. doi:<a href=\"https://doi.org/10.1117/12.2251014\">10.1117/12.2251014</a>, .","ufg":"<b>Neu, Marc u. a.</b>: Modeling, simulation and measurement of a bidirectional optical interconnection system for industrial applications, in: <i>Schröder, Henning/Chen, Ray T. (Hgg.)</i>: Optical Interconnects XVII, Bd. 10109, Bellingham, Wash. 2017 (Proceedings of SPIE ).","mla":"Neu, Marc, et al. “Modeling, Simulation and Measurement of a Bidirectional Optical Interconnection System for Industrial Applications.” <i>Optical Interconnects XVII</i>, edited by Henning Schröder and Ray T. Chen, vol. 10109, SPIE, 2017, <a href=\"https://doi.org/10.1117/12.2251014\">https://doi.org/10.1117/12.2251014</a>.","apa":"Neu, M., Grünberg, O., Christophliemke, T., &#38; Stübbe, O. (2017). Modeling, simulation and measurement of a bidirectional optical interconnection system for industrial applications. In H. Schröder &#38; R. T. Chen (Eds.), <i>Optical Interconnects XVII</i> (Vol. 10109). SPIE. <a href=\"https://doi.org/10.1117/12.2251014\">https://doi.org/10.1117/12.2251014</a>","short":"M. Neu, O. Grünberg, T. Christophliemke, O. Stübbe, in: H. Schröder, R.T. Chen (Eds.), Optical Interconnects XVII, SPIE, Bellingham, Wash., 2017.","van":"Neu M, Grünberg O, Christophliemke T, Stübbe O. Modeling, simulation and measurement of a bidirectional optical interconnection system for industrial applications. In: Schröder H, Chen RT, editors. Optical Interconnects XVII. Bellingham, Wash.: SPIE; 2017. (Proceedings of SPIE ; vol. 10109).","ama":"Neu M, Grünberg O, Christophliemke T, Stübbe O. Modeling, simulation and measurement of a bidirectional optical interconnection system for industrial applications. In: Schröder H, Chen RT, eds. <i>Optical Interconnects XVII</i>. Vol 10109. Proceedings of SPIE . SPIE; 2017. doi:<a href=\"https://doi.org/10.1117/12.2251014\">10.1117/12.2251014</a>","ieee":"M. Neu, O. Grünberg, T. Christophliemke, and O. Stübbe, “Modeling, simulation and measurement of a bidirectional optical interconnection system for industrial applications,” in <i>Optical Interconnects XVII</i>, San Francisco, 2017, vol. 10109. doi: <a href=\"https://doi.org/10.1117/12.2251014\">10.1117/12.2251014</a>.","chicago":"Neu, Marc, Olaf Grünberg, Tobias Christophliemke, and Oliver Stübbe. “Modeling, Simulation and Measurement of a Bidirectional Optical Interconnection System for Industrial Applications.” In <i>Optical Interconnects XVII</i>, edited by Henning Schröder and Ray T. Chen, Vol. 10109. Proceedings of SPIE . Bellingham, Wash.: SPIE, 2017. <a href=\"https://doi.org/10.1117/12.2251014\">https://doi.org/10.1117/12.2251014</a>.","din1505-2-1":"<span style=\"font-variant:small-caps;\">Neu, Marc</span> ; <span style=\"font-variant:small-caps;\">Grünberg, Olaf</span> ; <span style=\"font-variant:small-caps;\">Christophliemke, Tobias</span> ; <span style=\"font-variant:small-caps;\">Stübbe, Oliver</span>: Modeling, simulation and measurement of a bidirectional optical interconnection system for industrial applications. In: <span style=\"font-variant:small-caps;\">Schröder, H.</span> ; <span style=\"font-variant:small-caps;\">Chen, R. T.</span> (Hrsg.): <i>Optical Interconnects XVII</i>, <i>Proceedings of SPIE </i>. Bd. 10109. Bellingham, Wash. : SPIE, 2017","bjps":"<b>Neu M <i>et al.</i></b> (2017) Modeling, Simulation and Measurement of a Bidirectional Optical Interconnection System for Industrial Applications. In Schröder H and Chen RT (eds), <i>Optical Interconnects XVII</i>, vol. 10109. Bellingham, Wash.: SPIE."},"_id":"10226","series_title":"Proceedings of SPIE ","publication":"Optical Interconnects XVII","doi":"10.1117/12.2251014","date_updated":"2024-03-21T09:59:33Z","type":"conference","publisher":"SPIE","editor":[{"last_name":"Schröder","full_name":"Schröder, Henning","first_name":"Henning"},{"full_name":"Chen, Ray T.","last_name":"Chen","first_name":"Ray T."}],"conference":{"end_date":"2017-02-01","start_date":"2017-01-30","name":"XVII. Optical Interconnects ","location":"San Francisco"},"abstract":[{"text":"This paper presents a bidirectional optical data transmission system as an enhancement of a contactless power transmission system (CPTS). The latter consists of two separate devices and is able to transmit up to 240W of electrical power using inductive resonant coupling. The optical system consists of two self-developed light-guiding structures and a short-reach free-space optical path. As source and sink of the optical system a light-emitting diode resp. a photodiode with a centroid wavelength of 850nm are used. The optical system is positioned within the CPTS; it transmits the PROFIBUS protocol. Due to the restrictions given by the applications areas of the CPTS, such as air gap up to 5°mm, misalignment up to 2 mm, tilting up to 5 and rotation angle up to 360°, different kinds of light-guiding structures are analyzed by simulation. Based on these results the most promising structures are selected and manufactured. Hereafter the attenuation and the near field characteristic of one light-guiding structure is analyzed. After this, the attenuation based on misalignment, variation of air gap, tilting and rotation between two light-guiding structures are analyzed by measurement. To check whether the requirements of the PROFIBUS has been satisfied by the complete data transmission system, the transient transmission behavior of the system was analyzed by a pseudo-random bit stream. In this paper the most important results of the design, the simulation and the measurement are explained. The presented results demonstrate the ability to design of such systems based on simulations and to evaluate the suitability of various geometries for present and future works.","lang":"eng"}],"department":[{"_id":"DEP5020"}],"year":"2017","user_id":"51864","status":"public"},{"type":"conference_editor_article","author":[{"first_name":"Christian","last_name":"Hennigs","full_name":"Hennigs, Christian"},{"first_name":"Rabi","full_name":"Lahdo, Rabi","last_name":"Lahdo"},{"first_name":"André","full_name":"Springer, André","last_name":"Springer","id":"71733"},{"last_name":"Kaierle","full_name":"Kaierle, Stefan","first_name":"Stefan"},{"first_name":"Michael","full_name":"Hustedt, Michael","last_name":"Hustedt"},{"first_name":"Helmut","last_name":"Brand","full_name":"Brand, Helmut"},{"first_name":"Richard","last_name":"Wloka","full_name":"Wloka, Richard"},{"last_name":"Zobel","full_name":"Zobel, Frank","first_name":"Frank"},{"last_name":"Dültgen","full_name":"Dültgen, Peter","first_name":"Peter"}],"publication_identifier":{"issn":["0277-786X"]},"citation":{"chicago":"Hennigs, Christian, Rabi Lahdo, André Springer, Stefan Kaierle, Michael Hustedt, Helmut Brand, Richard Wloka, Frank Zobel, and Peter Dültgen. <i>Laser-Based Gluing of Diamond-Tipped Saw Blades</i>. Edited by Friedhelm Dorsch and Stefan Kaierle. <i>SPIE Proceedings</i>. Society of Photo-Optical Instrumentation Engineers (SPIE), 2016. <a href=\"https://doi.org/10.1117/12.2212842\">https://doi.org/10.1117/12.2212842</a>.","din1505-2-1":"<span style=\"font-variant:small-caps;\"><span style=\"font-variant:small-caps;\">Hennigs, Christian</span> ; <span style=\"font-variant:small-caps;\">Lahdo, Rabi</span> ; <span style=\"font-variant:small-caps;\">Springer, André</span> ; <span style=\"font-variant:small-caps;\">Kaierle, Stefan</span> ; <span style=\"font-variant:small-caps;\">Hustedt, Michael</span> ; <span style=\"font-variant:small-caps;\">Brand, Helmut</span> ; <span style=\"font-variant:small-caps;\">Wloka, Richard</span> ; <span style=\"font-variant:small-caps;\">Zobel, Frank</span> ; u. a.</span> ; <span style=\"font-variant:small-caps;\">Dorsch, F.</span> ; <span style=\"font-variant:small-caps;\">Kaierle, S.</span> (Hrsg.): <i>Laser-based gluing of diamond-tipped saw blades</i> : Society of Photo-Optical Instrumentation Engineers (SPIE), 2016","bjps":"<b>Hennigs C <i>et al.</i></b> (2016) <i>Laser-Based Gluing of Diamond-Tipped Saw Blades</i>, Dorsch F and Kaierle S (eds). Society of Photo-Optical Instrumentation Engineers (SPIE).","van":"Hennigs C, Lahdo R, Springer A, Kaierle S, Hustedt M, Brand H, et al. Laser-based gluing of diamond-tipped saw blades. Dorsch F, Kaierle S, editors. SPIE Proceedings. Society of Photo-Optical Instrumentation Engineers (SPIE); 2016.","ama":"Hennigs C, Lahdo R, Springer A, et al. <i>Laser-Based Gluing of Diamond-Tipped Saw Blades</i>. (Dorsch F, Kaierle S, eds.). Society of Photo-Optical Instrumentation Engineers (SPIE); 2016. doi:<a href=\"https://doi.org/10.1117/12.2212842\">10.1117/12.2212842</a>","ieee":"C. Hennigs <i>et al.</i>, <i>Laser-based gluing of diamond-tipped saw blades</i>. Society of Photo-Optical Instrumentation Engineers (SPIE), 2016.","chicago-de":"Hennigs, Christian, Rabi Lahdo, André Springer, Stefan Kaierle, Michael Hustedt, Helmut Brand, Richard Wloka, Frank Zobel und Peter Dültgen. 2016. <i>Laser-based gluing of diamond-tipped saw blades</i>. Hg. von Friedhelm Dorsch und Stefan Kaierle. <i>SPIE Proceedings</i>. Society of Photo-Optical Instrumentation Engineers (SPIE). doi:<a href=\"https://doi.org/10.1117/12.2212842,\">10.1117/12.2212842,</a> .","ufg":"<b>Hennigs, Christian et. al. (2016)</b>: Laser-based gluing of diamond-tipped saw blades.","mla":"Hennigs, Christian, et al. “Laser-Based Gluing of Diamond-Tipped Saw Blades.” <i>SPIE Proceedings</i>, edited by Friedhelm Dorsch and Stefan Kaierle, Society of Photo-Optical Instrumentation Engineers (SPIE), 2016, doi:<a href=\"https://doi.org/10.1117/12.2212842\">10.1117/12.2212842</a>.","apa":"Hennigs, C., Lahdo, R., Springer, A., Kaierle, S., Hustedt, M., Brand, H., … Dültgen, P. (2016). <i>Laser-based gluing of diamond-tipped saw blades</i>. (F. Dorsch &#38; S. Kaierle, Eds.), <i>SPIE Proceedings</i>. San Francisco, California, United States: Society of Photo-Optical Instrumentation Engineers (SPIE). <a href=\"https://doi.org/10.1117/12.2212842\">https://doi.org/10.1117/12.2212842</a>","short":"C. Hennigs, R. Lahdo, A. Springer, S. Kaierle, M. Hustedt, H. Brand, R. Wloka, F. Zobel, P. Dültgen, Laser-Based Gluing of Diamond-Tipped Saw Blades, Society of Photo-Optical Instrumentation Engineers (SPIE), 2016.","havard":"C. Hennigs, R. Lahdo, A. Springer, S. Kaierle, M. Hustedt, H. Brand, R. Wloka, F. Zobel, P. Dültgen, Laser-based gluing of diamond-tipped saw blades, Society of Photo-Optical Instrumentation Engineers (SPIE), 2016."},"publication_status":"published","editor":[{"first_name":"Friedhelm","full_name":"Dorsch, Friedhelm","last_name":"Dorsch"},{"first_name":"Stefan","full_name":"Kaierle, Stefan","last_name":"Kaierle"}],"language":[{"iso":"eng"}],"date_created":"2022-04-29T16:13:22Z","publisher":"Society of Photo-Optical Instrumentation Engineers (SPIE)","date_updated":"2023-03-15T13:50:12Z","doi":"10.1117/12.2212842","title":"Laser-based gluing of diamond-tipped saw blades","quality_controlled":"1","user_id":"79260","year":2016,"department":[{"_id":"DEP7037"}],"status":"public","publication":"SPIE Proceedings","_id":"7853","extern":"1","conference":{"name":"SPIE LASE","location":"San Francisco, California, United States"}},{"title":"Semi-analytic ray tracing method for time-efficient computing of transmission behavior of PCB level optical interconnects with varying core cross sections","place":"Bellingham, Wash.","citation":{"bjps":"<b>Stübbe O</b> (2015) Semi-Analytic Ray Tracing Method for Time-Efficient Computing of Transmission Behavior of PCB Level Optical Interconnects with Varying Core Cross Sections. In Schröder H and Chen RT (eds), <i>Optical Interconnects XVII</i>, vol. 9368. Bellingham, Wash.: SPIE.","din1505-2-1":"<span style=\"font-variant:small-caps;\">Stübbe, Oliver</span>: Semi-analytic ray tracing method for time-efficient computing of transmission behavior of PCB level optical interconnects with varying core cross sections. In: <span style=\"font-variant:small-caps;\">Schröder, H.</span> ; <span style=\"font-variant:small-caps;\">Chen, R. T.</span> (Hrsg.): <i>Optical Interconnects XVII</i>, <i>Proceedings of SPIE</i>. Bd. 9368. Bellingham, Wash. : SPIE, 2015","chicago":"Stübbe, Oliver. “Semi-Analytic Ray Tracing Method for Time-Efficient Computing of Transmission Behavior of PCB Level Optical Interconnects with Varying Core Cross Sections.” In <i>Optical Interconnects XVII</i>, edited by Henning Schröder and Ray T. Chen, Vol. 9368. Proceedings of SPIE. Bellingham, Wash.: SPIE, 2015. <a href=\"https://doi.org/10.1117/12.2076931\">https://doi.org/10.1117/12.2076931</a>.","ieee":"O. Stübbe, “Semi-analytic ray tracing method for time-efficient computing of transmission behavior of PCB level optical interconnects with varying core cross sections,” in <i>Optical Interconnects XVII</i>, San Francisco, 2015, vol. 9368. doi: <a href=\"https://doi.org/10.1117/12.2076931\">10.1117/12.2076931</a>.","ama":"Stübbe O. Semi-analytic ray tracing method for time-efficient computing of transmission behavior of PCB level optical interconnects with varying core cross sections. In: Schröder H, Chen RT, eds. <i>Optical Interconnects XVII</i>. Vol 9368. Proceedings of SPIE. SPIE; 2015. doi:<a href=\"https://doi.org/10.1117/12.2076931\">10.1117/12.2076931</a>","van":"Stübbe O. Semi-analytic ray tracing method for time-efficient computing of transmission behavior of PCB level optical interconnects with varying core cross sections. In: Schröder H, Chen RT, editors. Optical Interconnects XVII. Bellingham, Wash.: SPIE; 2015. (Proceedings of SPIE; vol. 9368).","short":"O. Stübbe, in: H. Schröder, R.T. Chen (Eds.), Optical Interconnects XVII, SPIE, Bellingham, Wash., 2015.","mla":"Stübbe, Oliver. “Semi-Analytic Ray Tracing Method for Time-Efficient Computing of Transmission Behavior of PCB Level Optical Interconnects with Varying Core Cross Sections.” <i>Optical Interconnects XVII</i>, edited by Henning Schröder and Ray T. Chen, vol. 9368, 936804, SPIE, 2015, <a href=\"https://doi.org/10.1117/12.2076931\">https://doi.org/10.1117/12.2076931</a>.","apa":"Stübbe, O. (2015). Semi-analytic ray tracing method for time-efficient computing of transmission behavior of PCB level optical interconnects with varying core cross sections. In H. Schröder &#38; R. T. Chen (Eds.), <i>Optical Interconnects XVII</i> (No. 936804; Vol. 9368). SPIE. <a href=\"https://doi.org/10.1117/12.2076931\">https://doi.org/10.1117/12.2076931</a>","ufg":"<b>Stübbe, Oliver</b>: Semi-analytic ray tracing method for time-efficient computing of transmission behavior of PCB level optical interconnects with varying core cross sections, in: <i>Schröder, Henning/Chen, Ray T. (Hgg.)</i>: Optical Interconnects XVII, Bd. 9368, Bellingham, Wash. 2015 (Proceedings of SPIE).","chicago-de":"Stübbe, Oliver. 2015. Semi-analytic ray tracing method for time-efficient computing of transmission behavior of PCB level optical interconnects with varying core cross sections. In: <i>Optical Interconnects XVII</i>, hg. von Henning Schröder und Ray T. Chen, 9368:. Proceedings of SPIE. Bellingham, Wash.: SPIE. doi:<a href=\"https://doi.org/10.1117/12.2076931\">10.1117/12.2076931</a>, .","havard":"O. Stübbe, Semi-analytic ray tracing method for time-efficient computing of transmission behavior of PCB level optical interconnects with varying core cross sections, in: H. Schröder, R.T. Chen (Eds.), Optical Interconnects XVII, SPIE, Bellingham, Wash., 2015."},"language":[{"iso":"eng"}],"date_created":"2023-08-17T11:18:35Z","publication_status":"published","volume":9368,"intvolume":"      9368","author":[{"orcid":"https://orcid.org/0000-0001-7293-6893","full_name":"Stübbe, Oliver","last_name":"Stübbe","id":"51864","first_name":"Oliver"}],"publication_identifier":{"issn":["0277-786X"]},"article_number":"936804","_id":"10224","publication":"Optical Interconnects XVII","series_title":"Proceedings of SPIE","doi":"10.1117/12.2076931","date_updated":"2024-04-19T11:50:14Z","quality_controlled":"1","publisher":"SPIE","editor":[{"full_name":"Schröder, Henning","last_name":"Schröder","first_name":"Henning"},{"full_name":"Chen, Ray T.","last_name":"Chen","first_name":"Ray T."}],"type":"conference","abstract":[{"lang":"eng","text":"Optical interconnects on printed circuit board level are a promising choice to support high bandwidth for short distance interconnects. These interconnects consists of highly multimode step index waveguides with rectangular core cross sections. Therefore ray tracing is an excellent method to determine the optical path parameters, e.g. optical power, ray path lengths and local ray directions. Based on these parameters the step response, the transient transfer function and the coupling behavior can be calculated. Classical ray tracing methods calculates the optical path parameters of each ray by successively computing internal reflections until a termination condition is reached. Therefore the computing time depends on the number of internal reflections. If the optical waveguide consists of cascaded straight and curved segments, e. g. point-to-point interconnects, one can use the analytic ray tracing method to determine the optical path parameters. The whole path parameters of each ray are determined by one analytical computation. The computing time depends on the number of segments. The analytic ray tracing method is unusable to determine ray path parameters of segments with varying core cross sections, e.g. tapers, crossings, splitters and combiners."}],"conference":{"start_date":"2015-02-07","end_date":"2015-02-12","name":" XV. Optical Interconnects","location":"San Francisco"},"status":"public","user_id":"51864","year":"2015","department":[{"_id":"DEP5020"},{"_id":"DEP6020"}]},{"title":"Laser welding of dissimilar materials for lightweight construction and special applications","doi":"10.1117/12.2006335","date_updated":"2023-03-15T13:50:12Z","publication_status":"published","editor":[{"first_name":"Friedhelm","last_name":"Dorsch","full_name":"Dorsch, Friedhelm"}],"language":[{"iso":"eng"}],"publisher":"SPIE","date_created":"2022-04-29T16:17:36Z","citation":{"ieee":"M. Schimek, A. Springer, R. Pfeifer, and S. Kaierle, <i>Laser welding of dissimilar materials for lightweight construction and special applications</i>. SPIE, 2013.","havard":"M. Schimek, A. Springer, R. Pfeifer, S. Kaierle, Laser welding of dissimilar materials for lightweight construction and special applications, SPIE, 2013.","van":"Schimek M, Springer A, Pfeifer R, Kaierle S. Laser welding of dissimilar materials for lightweight construction and special applications. Dorsch F, editor. SPIE Proceedings. SPIE; 2013.","ama":"Schimek M, Springer A, Pfeifer R, Kaierle S. <i>Laser Welding of Dissimilar Materials for Lightweight Construction and Special Applications</i>. (Dorsch F, ed.). SPIE; 2013. doi:<a href=\"https://doi.org/10.1117/12.2006335\">10.1117/12.2006335</a>","din1505-2-1":"<span style=\"font-variant:small-caps;\">Schimek, Mitja</span> ; <span style=\"font-variant:small-caps;\">Springer, André</span> ; <span style=\"font-variant:small-caps;\">Pfeifer, Ronny</span> ; <span style=\"font-variant:small-caps;\">Kaierle, Stefan</span> ; <span style=\"font-variant:small-caps;\">Dorsch, F.</span> (Hrsg.): <i>Laser welding of dissimilar materials for lightweight construction and special applications</i> : SPIE, 2013","mla":"Schimek, Mitja, et al. “Laser Welding of Dissimilar Materials for Lightweight Construction and Special Applications.” <i>SPIE Proceedings</i>, edited by Friedhelm Dorsch, SPIE, 2013, doi:<a href=\"https://doi.org/10.1117/12.2006335\">10.1117/12.2006335</a>.","apa":"Schimek, M., Springer, A., Pfeifer, R., &#38; Kaierle, S. (2013). <i>Laser welding of dissimilar materials for lightweight construction and special applications</i>. (F. Dorsch, Ed.), <i>SPIE Proceedings</i>. San Francisco, California, United States: SPIE. <a href=\"https://doi.org/10.1117/12.2006335\">https://doi.org/10.1117/12.2006335</a>","bjps":"<b>Schimek M <i>et al.</i></b> (2013) <i>Laser Welding of Dissimilar Materials for Lightweight Construction and Special Applications</i>, Dorsch F (ed.). SPIE.","short":"M. Schimek, A. Springer, R. Pfeifer, S. Kaierle, Laser Welding of Dissimilar Materials for Lightweight Construction and Special Applications, SPIE, 2013.","chicago-de":"Schimek, Mitja, André Springer, Ronny Pfeifer und Stefan Kaierle. 2013. <i>Laser welding of dissimilar materials for lightweight construction and special applications</i>. Hg. von Friedhelm Dorsch. <i>SPIE Proceedings</i>. SPIE. doi:<a href=\"https://doi.org/10.1117/12.2006335,\">10.1117/12.2006335,</a> .","chicago":"Schimek, Mitja, André Springer, Ronny Pfeifer, and Stefan Kaierle. <i>Laser Welding of Dissimilar Materials for Lightweight Construction and Special Applications</i>. Edited by Friedhelm Dorsch. <i>SPIE Proceedings</i>. SPIE, 2013. <a href=\"https://doi.org/10.1117/12.2006335\">https://doi.org/10.1117/12.2006335</a>.","ufg":"<b>Schimek, Mitja et. al. (2013)</b>: Laser welding of dissimilar materials for lightweight construction and special applications."},"publication_identifier":{"issn":["0277-786X"]},"type":"conference_editor_article","author":[{"full_name":"Schimek, Mitja","last_name":"Schimek","first_name":"Mitja"},{"id":"71733","last_name":"Springer","full_name":"Springer, André","first_name":"André"},{"last_name":"Pfeifer","full_name":"Pfeifer, Ronny","first_name":"Ronny"},{"first_name":"Stefan","last_name":"Kaierle","full_name":"Kaierle, Stefan"}],"conference":{"location":"San Francisco, California, United States","name":"SPIE LASE"},"_id":"7863","extern":"1","publication":"SPIE Proceedings","status":"public","department":[{"_id":"DEP7037"}],"year":2013,"user_id":"79260"},{"_id":"11230","publication":"Optoelectronic Interconnects and Component Integration XI","series_title":"Proceedings of SPIE","title":"Evaluation of graded index glass waveguides for board-level WDM optical chip-to-chip communications","citation":{"short":"J. Schrage, O. Stübbe, L. Brusberg, Y. Soenmez, H. Schroeder, R. Schuhmann, Evaluation of Graded Index Glass Waveguides for Board-Level WDM Optical Chip-to-Chip Communications, SPIE, Piscataway, NJ, 2011.","apa":"Schrage, J., Stübbe, O., Brusberg, L., Soenmez, Y., Schroeder, H., &#38; Schuhmann, R. (2011). Evaluation of graded index glass waveguides for board-level WDM optical chip-to-chip communications. In A. L. Glebov &#38; R. T. Chen (Eds.), <i>Optoelectronic Interconnects and Component Integration XI</i> (Vol. 7944). SPIE. <a href=\"https://doi.org/10.1117/12.876458\">https://doi.org/10.1117/12.876458</a>","mla":"Schrage, J., et al. “Evaluation of Graded Index Glass Waveguides for Board-Level WDM Optical Chip-to-Chip Communications.” <i>Optoelectronic Interconnects and Component Integration XI</i>, edited by Alexei L. Glebov and Ray T. Chen, vol. 7944, SPIE, 2011, <a href=\"https://doi.org/10.1117/12.876458\">https://doi.org/10.1117/12.876458</a>.","ufg":"<b>Schrage, J. u. a.</b>: Evaluation of graded index glass waveguides for board-level WDM optical chip-to-chip communications, Bd. 7944, hg. von Glebov, Alexei L./Chen, Ray T., Piscataway, NJ 2011 (Proceedings of SPIE).","chicago-de":"Schrage, J., Oliver Stübbe, L. Brusberg, Y. Soenmez, H. Schroeder und R. Schuhmann. 2011. <i>Evaluation of graded index glass waveguides for board-level WDM optical chip-to-chip communications</i>. Hg. von Alexei L. Glebov und Ray T. Chen. <i>Optoelectronic Interconnects and Component Integration XI</i>. Bd. 7944. Proceedings of SPIE. Piscataway, NJ: SPIE. doi:<a href=\"https://doi.org/10.1117/12.876458\">10.1117/12.876458</a>, .","havard":"J. Schrage, O. Stübbe, L. Brusberg, Y. Soenmez, H. Schroeder, R. Schuhmann, Evaluation of graded index glass waveguides for board-level WDM optical chip-to-chip communications, SPIE, Piscataway, NJ, 2011.","bjps":"<b>Schrage J <i>et al.</i></b> (2011) <i>Evaluation of Graded Index Glass Waveguides for Board-Level WDM Optical Chip-to-Chip Communications</i>, Glebov AL and Chen RT (eds). Piscataway, NJ: SPIE.","din1505-2-1":"<span style=\"font-variant:small-caps;\">Schrage, J.</span> ; <span style=\"font-variant:small-caps;\">Stübbe, Oliver</span> ; <span style=\"font-variant:small-caps;\">Brusberg, L.</span> ; <span style=\"font-variant:small-caps;\">Soenmez, Y.</span> ; <span style=\"font-variant:small-caps;\">Schroeder, H.</span> ; <span style=\"font-variant:small-caps;\">Schuhmann, R.</span> ; <span style=\"font-variant:small-caps;\">Glebov, A. L.</span> ; <span style=\"font-variant:small-caps;\">Chen, R. T.</span> (Hrsg.): <i>Evaluation of graded index glass waveguides for board-level WDM optical chip-to-chip communications</i>, <i>Proceedings of SPIE</i>. Bd. 7944. Piscataway, NJ : SPIE, 2011","chicago":"Schrage, J., Oliver Stübbe, L. Brusberg, Y. Soenmez, H. Schroeder, and R. Schuhmann. <i>Evaluation of Graded Index Glass Waveguides for Board-Level WDM Optical Chip-to-Chip Communications</i>. Edited by Alexei L. Glebov and Ray T. Chen. <i>Optoelectronic Interconnects and Component Integration XI</i>. Vol. 7944. Proceedings of SPIE. Piscataway, NJ: SPIE, 2011. <a href=\"https://doi.org/10.1117/12.876458\">https://doi.org/10.1117/12.876458</a>.","ieee":"J. Schrage, O. Stübbe, L. Brusberg, Y. Soenmez, H. Schroeder, and R. Schuhmann, <i>Evaluation of graded index glass waveguides for board-level WDM optical chip-to-chip communications</i>, vol. 7944. Piscataway, NJ: SPIE, 2011. doi: <a href=\"https://doi.org/10.1117/12.876458\">10.1117/12.876458</a>.","ama":"Schrage J, Stübbe O, Brusberg L, Soenmez Y, Schroeder H, Schuhmann R. <i>Evaluation of Graded Index Glass Waveguides for Board-Level WDM Optical Chip-to-Chip Communications</i>. Vol 7944. (Glebov AL, Chen RT, eds.). SPIE; 2011. doi:<a href=\"https://doi.org/10.1117/12.876458\">10.1117/12.876458</a>","van":"Schrage J, Stübbe O, Brusberg L, Soenmez Y, Schroeder H, Schuhmann R. Evaluation of graded index glass waveguides for board-level WDM optical chip-to-chip communications. Glebov AL, Chen RT, editors. Optoelectronic Interconnects and Component Integration XI. Piscataway, NJ: SPIE; 2011. (Proceedings of SPIE; vol. 7944)."},"place":"Piscataway, NJ","publication_status":"published","volume":7944,"language":[{"iso":"eng"}],"date_created":"2024-03-17T16:19:34Z","intvolume":"      7944","author":[{"first_name":"J.","full_name":"Schrage, J.","last_name":"Schrage"},{"orcid":"https://orcid.org/0000-0001-7293-6893","last_name":"Stübbe","id":"51864","full_name":"Stübbe, Oliver","first_name":"Oliver"},{"full_name":"Brusberg, L.","last_name":"Brusberg","first_name":"L."},{"last_name":"Soenmez","full_name":"Soenmez, Y.","first_name":"Y."},{"first_name":"H.","last_name":"Schroeder","full_name":"Schroeder, H."},{"full_name":"Schuhmann, R.","last_name":"Schuhmann","first_name":"R."}],"publication_identifier":{"issn":["0277-786X"],"isbn":[" 978-0-8194-8481-9 "]},"abstract":[{"text":"A Proof-of-Concept for a multi-channel WDM board-level optical communications link is under development. This paper is focusing on theoretical and experimental evaluation of thin-glass based nearly single mode graded index optical waveguides with regard to low loss in the 1310nm regime. Results from waveguide characterization will be reported. Waveguide modes are determined theoretically from the measured refractive index profiles. Towards improvement of the robustness of the coupling efficiency against misalignments, investigations on the use of tapered waveguide structures will be presented too.","lang":"eng"}],"conference":{"location":"San Francisco, California, United States","name":"XI Optoelectronic Interconnects and Component Integration Conference","end_date":"2011-01-27","start_date":"2011-01-22"},"status":"public","user_id":"83781","year":"2011","department":[{"_id":"DEP5020"}],"doi":"10.1117/12.876458","date_updated":"2024-03-20T10:56:04Z","editor":[{"first_name":"Alexei L.","full_name":"Glebov, Alexei L.","last_name":"Glebov"},{"full_name":"Chen, Ray T.","last_name":"Chen","first_name":"Ray T."}],"publisher":"SPIE","type":"conference_editor_article"},{"date_updated":"2024-03-22T13:22:39Z","doi":"10.1117/12.505775","publisher":"SPIE","editor":[{"first_name":"Pierre","full_name":"Ambs, Pierre","last_name":"Ambs"},{"full_name":"Beyette, Jr., Fred R.","last_name":"Beyette, Jr.","first_name":"Fred R."}],"type":"conference_editor_article","abstract":[{"lang":"eng","text":"Modal noise is an undesired modulation of the guided light intensity in a multimode waveguide. Applying the frequency correlation function the frequency dependence of this noise as well as the bandwidth of a multimode waveguide can be estimated. In this paper the existing model of the frequency correlation function for a waveguide with smoothed dielectric interfaces is enhanced to analyze the influence of surface roughness on the achievable bandwidth. This surface roughness is caused by the manufacturing process of the waveguides."}],"conference":{"start_date":"2003-08-03","end_date":"2003-08-08","name":"OPTICAL SCIENCE AND TECHNOLOGY, SPIE'S 48TH ANNUAL MEETING ","location":"San Diego, California, United States"},"status":"public","user_id":"83781","year":"2003","department":[{"_id":"DEP5020"}],"title":"Influence of surface roughness on the bandwidth of optical multimode waveguides analyzed by modal noise theory","citation":{"chicago":"Stübbe, Oliver, Thomas Bierhoff, Juergen Schrage, and Gerd Mrozynski. <i>Influence of Surface Roughness on the Bandwidth of Optical Multimode Waveguides Analyzed by Modal Noise Theory</i>. Edited by Pierre Ambs and Fred R. Beyette, Jr. <i>Wave Optics and Photonic Devices for Optical Information Processing II</i>. Vol. 5181. Proceedings of SPIE. SPIE, 2003. <a href=\"https://doi.org/10.1117/12.505775\">https://doi.org/10.1117/12.505775</a>.","din1505-2-1":"<span style=\"font-variant:small-caps;\">Stübbe, Oliver</span> ; <span style=\"font-variant:small-caps;\">Bierhoff, Thomas</span> ; <span style=\"font-variant:small-caps;\">Schrage, Juergen</span> ; <span style=\"font-variant:small-caps;\">Mrozynski, Gerd</span> ; <span style=\"font-variant:small-caps;\">Ambs, P.</span> ; <span style=\"font-variant:small-caps;\">Beyette, Jr., F. R.</span> (Hrsg.): <i>Influence of surface roughness on the bandwidth of optical multimode waveguides analyzed by modal noise theory</i>, <i>Proceedings of SPIE</i>. Bd. 5181 : SPIE, 2003","bjps":"<b>Stübbe O <i>et al.</i></b> (2003) <i>Influence of Surface Roughness on the Bandwidth of Optical Multimode Waveguides Analyzed by Modal Noise Theory</i>, Ambs P and Beyette, Jr. FR (eds). SPIE.","ama":"Stübbe O, Bierhoff T, Schrage J, Mrozynski G. <i>Influence of Surface Roughness on the Bandwidth of Optical Multimode Waveguides Analyzed by Modal Noise Theory</i>. Vol 5181. (Ambs P, Beyette, Jr. FR, eds.). SPIE; 2003. doi:<a href=\"https://doi.org/10.1117/12.505775\">10.1117/12.505775</a>","van":"Stübbe O, Bierhoff T, Schrage J, Mrozynski G. Influence of surface roughness on the bandwidth of optical multimode waveguides analyzed by modal noise theory. Ambs P, Beyette, Jr. FR, editors. Wave Optics and Photonic Devices for Optical Information Processing II. SPIE; 2003. (Proceedings of SPIE; vol. 5181).","ieee":"O. Stübbe, T. Bierhoff, J. Schrage, and G. Mrozynski, <i>Influence of surface roughness on the bandwidth of optical multimode waveguides analyzed by modal noise theory</i>, vol. 5181. SPIE, 2003. doi: <a href=\"https://doi.org/10.1117/12.505775\">10.1117/12.505775</a>.","chicago-de":"Stübbe, Oliver, Thomas Bierhoff, Juergen Schrage und Gerd Mrozynski. 2003. <i>Influence of surface roughness on the bandwidth of optical multimode waveguides analyzed by modal noise theory</i>. Hg. von Pierre Ambs und Fred R. Beyette, Jr. <i>Wave Optics and Photonic Devices for Optical Information Processing II</i>. Bd. 5181. Proceedings of SPIE. SPIE. doi:<a href=\"https://doi.org/10.1117/12.505775\">10.1117/12.505775</a>, .","ufg":"<b>Stübbe, Oliver u. a.</b>: Influence of surface roughness on the bandwidth of optical multimode waveguides analyzed by modal noise theory, Bd. 5181, hg. von Ambs, Pierre/Beyette, Jr., Fred R., o. O. 2003 (Proceedings of SPIE).","apa":"Stübbe, O., Bierhoff, T., Schrage, J., &#38; Mrozynski, G. (2003). Influence of surface roughness on the bandwidth of optical multimode waveguides analyzed by modal noise theory. In P. Ambs &#38; F. R. Beyette, Jr. (Eds.), <i>Wave Optics and Photonic Devices for Optical Information Processing II</i> (Vol. 5181). SPIE. <a href=\"https://doi.org/10.1117/12.505775\">https://doi.org/10.1117/12.505775</a>","mla":"Stübbe, Oliver, et al. “Influence of Surface Roughness on the Bandwidth of Optical Multimode Waveguides Analyzed by Modal Noise Theory.” <i>Wave Optics and Photonic Devices for Optical Information Processing II</i>, edited by Pierre Ambs and Fred R. Beyette, Jr., vol. 5181, SPIE, 2003, <a href=\"https://doi.org/10.1117/12.505775\">https://doi.org/10.1117/12.505775</a>.","short":"O. Stübbe, T. Bierhoff, J. Schrage, G. Mrozynski, Influence of Surface Roughness on the Bandwidth of Optical Multimode Waveguides Analyzed by Modal Noise Theory, SPIE, 2003.","havard":"O. Stübbe, T. Bierhoff, J. Schrage, G. Mrozynski, Influence of surface roughness on the bandwidth of optical multimode waveguides analyzed by modal noise theory, SPIE, 2003."},"language":[{"iso":"eng"}],"date_created":"2024-02-29T17:08:24Z","publication_status":"published","volume":5181,"author":[{"first_name":"Oliver","full_name":"Stübbe, Oliver","id":"51864","last_name":"Stübbe","orcid":"https://orcid.org/0000-0001-7293-6893"},{"first_name":"Thomas","last_name":"Bierhoff","full_name":"Bierhoff, Thomas"},{"last_name":"Schrage","full_name":"Schrage, Juergen","first_name":"Juergen"},{"first_name":"Gerd","full_name":"Mrozynski, Gerd","last_name":"Mrozynski"}],"intvolume":"      5181","publication_identifier":{"issn":["0277-786X"]},"_id":"11130","publication":"Wave Optics and Photonic Devices for Optical Information Processing II","series_title":"Proceedings of SPIE"},{"extern":"1","abstract":[{"text":"Modal noise is an undesired modulation of the guided light intensity in a multimode waveguide. Applying the frequency correlation function the frequency dependence of this noise as well as the bandwidth of a multimode waveguide can be estimated. In this paper the existing model of the frequency correlation function for a waveguide with smoothed dielectric interfaces is enhanced to analyze the influence of surface roughness on the achievable bandwidth. This surface roughness is caused by the manufacturing process of the waveguides.","lang":"eng"}],"conference":{"location":"San Diego, California, United States","name":"OPTICAL SCIENCE AND TECHNOLOGY, SPIE'S 48TH ANNUAL MEETING","end_date":"2003-08-08","start_date":"2003-08-03"},"user_id":"51864","year":"2003","department":[{"_id":"DEP5020"}],"status":"public","doi":"10.1117/12.505775","date_updated":"2024-03-21T09:51:22Z","quality_controlled":"1","type":"conference_editor_article","editor":[{"last_name":"Ambs","full_name":"Ambs, Pierre","first_name":"Pierre"},{"first_name":"Fred R.","last_name":"Beyette, Jr.","full_name":"Beyette, Jr., Fred R."}],"publisher":"SPIE","_id":"11201","series_title":"Proceedings of SPIE","publication":"Wave Optics and Photonic Devices for Optical Information Processing II","title":"Influence of surface roughness on the bandwidth of optical multimode waveguides analyzed by modal noise theory","intvolume":"      5181","author":[{"full_name":"Stübbe, Oliver","id":"51864","last_name":"Stübbe","first_name":"Oliver","orcid":"https://orcid.org/0000-0001-7293-6893"},{"first_name":"Thomas","last_name":"Bierhoff","full_name":"Bierhoff, Thomas"},{"first_name":"Juergen","last_name":"Schrage","full_name":"Schrage, Juergen"},{"full_name":"Mrozynski, Gerd","last_name":"Mrozynski","first_name":"Gerd"}],"publication_identifier":{"issn":["0277-786X"],"isbn":["0-8194-5054-5 "]},"citation":{"short":"O. Stübbe, T. Bierhoff, J. Schrage, G. Mrozynski, Influence of Surface Roughness on the Bandwidth of Optical Multimode Waveguides Analyzed by Modal Noise Theory, SPIE, Piscataway, NJ, 2003.","apa":"Stübbe, O., Bierhoff, T., Schrage, J., &#38; Mrozynski, G. (2003). Influence of surface roughness on the bandwidth of optical multimode waveguides analyzed by modal noise theory. In P. Ambs &#38; F. R. Beyette, Jr. (Eds.), <i>Wave Optics and Photonic Devices for Optical Information Processing II</i> (Vol. 5181). SPIE. <a href=\"https://doi.org/10.1117/12.505775\">https://doi.org/10.1117/12.505775</a>","mla":"Stübbe, Oliver, et al. “Influence of Surface Roughness on the Bandwidth of Optical Multimode Waveguides Analyzed by Modal Noise Theory.” <i>Wave Optics and Photonic Devices for Optical Information Processing II</i>, edited by Pierre Ambs and Fred R. Beyette, Jr., vol. 5181, SPIE, 2003, <a href=\"https://doi.org/10.1117/12.505775\">https://doi.org/10.1117/12.505775</a>.","ufg":"<b>Stübbe, Oliver u. a.</b>: Influence of surface roughness on the bandwidth of optical multimode waveguides analyzed by modal noise theory, Bd. 5181, hg. von Ambs, Pierre/Beyette, Jr., Fred R., Piscataway, NJ 2003 (Proceedings of SPIE).","chicago-de":"Stübbe, Oliver, Thomas Bierhoff, Juergen Schrage und Gerd Mrozynski. 2003. <i>Influence of surface roughness on the bandwidth of optical multimode waveguides analyzed by modal noise theory</i>. Hg. von Pierre Ambs und Fred R. Beyette, Jr. <i>Wave Optics and Photonic Devices for Optical Information Processing II</i>. Bd. 5181. Proceedings of SPIE. Piscataway, NJ: SPIE. doi:<a href=\"https://doi.org/10.1117/12.505775\">10.1117/12.505775</a>, .","havard":"O. Stübbe, T. Bierhoff, J. Schrage, G. Mrozynski, Influence of surface roughness on the bandwidth of optical multimode waveguides analyzed by modal noise theory, SPIE, Piscataway, NJ, 2003.","bjps":"<b>Stübbe O <i>et al.</i></b> (2003) <i>Influence of Surface Roughness on the Bandwidth of Optical Multimode Waveguides Analyzed by Modal Noise Theory</i>, Ambs P and Beyette, Jr. FR (eds). Piscataway, NJ: SPIE.","din1505-2-1":"<span style=\"font-variant:small-caps;\">Stübbe, Oliver</span> ; <span style=\"font-variant:small-caps;\">Bierhoff, Thomas</span> ; <span style=\"font-variant:small-caps;\">Schrage, Juergen</span> ; <span style=\"font-variant:small-caps;\">Mrozynski, Gerd</span> ; <span style=\"font-variant:small-caps;\">Ambs, P.</span> ; <span style=\"font-variant:small-caps;\">Beyette, Jr., F. R.</span> (Hrsg.): <i>Influence of surface roughness on the bandwidth of optical multimode waveguides analyzed by modal noise theory</i>, <i>Proceedings of SPIE</i>. Bd. 5181. Piscataway, NJ : SPIE, 2003","chicago":"Stübbe, Oliver, Thomas Bierhoff, Juergen Schrage, and Gerd Mrozynski. <i>Influence of Surface Roughness on the Bandwidth of Optical Multimode Waveguides Analyzed by Modal Noise Theory</i>. Edited by Pierre Ambs and Fred R. Beyette, Jr. <i>Wave Optics and Photonic Devices for Optical Information Processing II</i>. Vol. 5181. Proceedings of SPIE. Piscataway, NJ: SPIE, 2003. <a href=\"https://doi.org/10.1117/12.505775\">https://doi.org/10.1117/12.505775</a>.","ieee":"O. Stübbe, T. Bierhoff, J. Schrage, and G. Mrozynski, <i>Influence of surface roughness on the bandwidth of optical multimode waveguides analyzed by modal noise theory</i>, vol. 5181. Piscataway, NJ: SPIE, 2003. doi: <a href=\"https://doi.org/10.1117/12.505775\">10.1117/12.505775</a>.","ama":"Stübbe O, Bierhoff T, Schrage J, Mrozynski G. <i>Influence of Surface Roughness on the Bandwidth of Optical Multimode Waveguides Analyzed by Modal Noise Theory</i>. Vol 5181. (Ambs P, Beyette, Jr. FR, eds.). SPIE; 2003. doi:<a href=\"https://doi.org/10.1117/12.505775\">10.1117/12.505775</a>","van":"Stübbe O, Bierhoff T, Schrage J, Mrozynski G. Influence of surface roughness on the bandwidth of optical multimode waveguides analyzed by modal noise theory. Ambs P, Beyette, Jr. FR, editors. Wave Optics and Photonic Devices for Optical Information Processing II. Piscataway, NJ: SPIE; 2003. (Proceedings of SPIE; vol. 5181)."},"place":"Piscataway, NJ","volume":5181,"publication_status":"published","date_created":"2024-03-07T14:18:48Z","language":[{"iso":"eng"}]}]