---
_id: '13671'
abstract:
- lang: eng
  text: The aging of biodiesel proceeds via multiple pathways, with oligomerization
    playing a central role. In this study, we investigated an epoxide-dependent oligomerization
    pathway, which had previously only been postulated. Using methyl oleate (C18:1)
    as a model monounsaturated fatty acid and acetic acid as a representative, reactive
    nucleophile and known biodiesel aging product with a suitable boiling point, oligomeric
    products were identified by size-exclusion chromatography (SEC) coupled with electrospray
    ionization quadrupole time-of-flight mass spectrometry (ESI-QTOF-MS). The concentration
    of 20 wt% was chosen to ensure a measurable kinetic effect while maintaining stable
    reaction conditions. Furthermore, the role of methyl oleate during biodiesel aging
    was addressed. Time-resolved analysis confirmed the proposed sequential order
    of reactions. It was pointed out that elimination reactions may occur. The data
    support the formation of epoxides, despite the isobaric overlap with ketones,
    and show that hydroxyl intermediates undergo esterification and etherification.
    Moreover, experiments with pure C18:1 demonstrated that acetic acid–derived oligomers
    are generated. Under Rancimat conditions, addition of 20 wt% acetic acid resulted
    in an approximately 1.1 – 2.6 increase in product yield. Kinetic analysis revealed
    structure-dependent formation and decay behavior of the aging products, with slightly
    faster epoxidation and shifted product distributions toward higher oligomeric
    species in the presence of acetic acid. Reactive intermediates were consumed more
    rapidly than oligomeric species and all decay processes followed apparent second-order
    kinetics. These findings provide direct experimental evidence for the involvement
    of epoxide-dependent pathways in biodiesel aging.
article_number: '139339'
author:
- first_name: Julian
  full_name: Türck, Julian
  last_name: Türck
- first_name: Carsten
  full_name: Funke, Carsten
  id: '74167'
  last_name: Funke
- first_name: Fabian
  full_name: Schmitt, Fabian
  last_name: Schmitt
- first_name: Jan
  full_name: Schneider, Jan
  id: '13209'
  last_name: Schneider
  orcid: 0000-0001-6401-8873
- first_name: Hans-Jürgen
  full_name: Danneel, Hans-Jürgen
  id: '12231'
  last_name: Danneel
- first_name: Ralf
  full_name: Türck, Ralf
  last_name: Türck
- first_name: Wolfgang
  full_name: Ruck, Wolfgang
  last_name: Ruck
- first_name: Jürgen
  full_name: Krahl, Jürgen
  id: '68870'
  last_name: Krahl
citation:
  ama: 'Türck J, Funke C, Schmitt F, et al. Kinetic study and confirmation of epoxide-dependent
    oligomerization of methyl oleate. <i>Fuel : the science and technology of fuel
    and energy </i>. 2026;424. doi:<a href="https://doi.org/10.1016/j.fuel.2026.139339">10.1016/j.fuel.2026.139339</a>'
  apa: 'Türck, J., Funke, C., Schmitt, F., Schneider, J., Danneel, H.-J., Türck, R.,
    Ruck, W., &#38; Krahl, J. (2026). Kinetic study and confirmation of epoxide-dependent
    oligomerization of methyl oleate. <i>Fuel : The Science and Technology of Fuel
    and Energy </i>, <i>424</i>, Article 139339. <a href="https://doi.org/10.1016/j.fuel.2026.139339">https://doi.org/10.1016/j.fuel.2026.139339</a>'
  bjps: '<b>Türck J <i>et al.</i></b> (2026) Kinetic Study and Confirmation of Epoxide-Dependent
    Oligomerization of Methyl Oleate. <i>Fuel : the science and technology of fuel
    and energy </i> <b>424</b>.'
  chicago: 'Türck, Julian, Carsten Funke, Fabian Schmitt, Jan Schneider, Hans-Jürgen
    Danneel, Ralf Türck, Wolfgang Ruck, and Jürgen Krahl. “Kinetic Study and Confirmation
    of Epoxide-Dependent Oligomerization of Methyl Oleate.” <i>Fuel : The Science
    and Technology of Fuel and Energy </i> 424 (2026). <a href="https://doi.org/10.1016/j.fuel.2026.139339">https://doi.org/10.1016/j.fuel.2026.139339</a>.'
  chicago-de: 'Türck, Julian, Carsten Funke, Fabian Schmitt, Jan Schneider, Hans-Jürgen
    Danneel, Ralf Türck, Wolfgang Ruck und Jürgen Krahl. 2026. Kinetic study and confirmation
    of epoxide-dependent oligomerization of methyl oleate. <i>Fuel : the science and
    technology of fuel and energy </i> 424. doi:<a href="https://doi.org/10.1016/j.fuel.2026.139339">10.1016/j.fuel.2026.139339</a>,
    .'
  din1505-2-1: '<span style="font-variant:small-caps;">Türck, Julian</span> ; <span
    style="font-variant:small-caps;">Funke, Carsten</span> ; <span style="font-variant:small-caps;">Schmitt,
    Fabian</span> ; <span style="font-variant:small-caps;">Schneider, Jan</span> ;
    <span style="font-variant:small-caps;">Danneel, Hans-Jürgen</span> ; <span style="font-variant:small-caps;">Türck,
    Ralf</span> ; <span style="font-variant:small-caps;">Ruck, Wolfgang</span> ; <span
    style="font-variant:small-caps;">Krahl, Jürgen</span>: Kinetic study and confirmation
    of epoxide-dependent oligomerization of methyl oleate. In: <i>Fuel : the science
    and technology of fuel and energy </i> Bd. 424. Amsterdam [u.a.], Elsevier (2026)'
  havard: 'J. Türck, C. Funke, F. Schmitt, J. Schneider, H.-J. Danneel, R. Türck,
    W. Ruck, J. Krahl, Kinetic study and confirmation of epoxide-dependent oligomerization
    of methyl oleate, Fuel : The Science and Technology of Fuel and Energy . 424 (2026).'
  ieee: 'J. Türck <i>et al.</i>, “Kinetic study and confirmation of epoxide-dependent
    oligomerization of methyl oleate,” <i>Fuel : the science and technology of fuel
    and energy </i>, vol. 424, Art. no. 139339, 2026, doi: <a href="https://doi.org/10.1016/j.fuel.2026.139339">10.1016/j.fuel.2026.139339</a>.'
  mla: 'Türck, Julian, et al. “Kinetic Study and Confirmation of Epoxide-Dependent
    Oligomerization of Methyl Oleate.” <i>Fuel : The Science and Technology of Fuel
    and Energy </i>, vol. 424, 139339, 2026, <a href="https://doi.org/10.1016/j.fuel.2026.139339">https://doi.org/10.1016/j.fuel.2026.139339</a>.'
  short: 'J. Türck, C. Funke, F. Schmitt, J. Schneider, H.-J. Danneel, R. Türck, W.
    Ruck, J. Krahl, Fuel : The Science and Technology of Fuel and Energy  424 (2026).'
  ufg: '<b>Türck, Julian u. a.</b>: Kinetic study and confirmation of epoxide-dependent
    oligomerization of methyl oleate, in: <i>Fuel : the science and technology of
    fuel and energy </i> 424 (2026).'
  van: 'Türck J, Funke C, Schmitt F, Schneider J, Danneel HJ, Türck R, et al. Kinetic
    study and confirmation of epoxide-dependent oligomerization of methyl oleate.
    Fuel : the science and technology of fuel and energy . 2026;424.'
date_created: 2026-04-07T12:49:23Z
date_updated: 2026-04-08T12:55:00Z
doi: 10.1016/j.fuel.2026.139339
intvolume: '       424'
keyword:
- Biodiesel aging
- Epoxide-dependent oligomerization
- Acetic acid
- Identification of aging products
- Kinetics of aging products
language:
- iso: eng
place: Amsterdam [u.a.]
publication: 'Fuel : the science and technology of fuel and energy '
publication_identifier:
  eissn:
  - 1873-7153
  issn:
  - 0016-2361
publication_status: published
publisher: Elsevier
quality_controlled: '1'
status: public
title: Kinetic study and confirmation of epoxide-dependent oligomerization of methyl
  oleate
type: scientific_journal_article
user_id: '83781'
volume: 424
year: '2026'
...
---
_id: '12871'
abstract:
- lang: eng
  text: Sustainability in the food chain and the prevention of food losses is an issue
    of increasing importance. There is a large number of processing by-products where
    innovative strategies are helpful for transferring these losses into a consumable
    state. In a step-by-step approach, this current study focused on the sensory properties
    of blends of sunflower press cake and whey, fermented with different consortia
    of microorganisms and intended for being used as a basis for a savory spread.
    In the first part of the work, blends fermented with six co-cultures from lactic
    acid bacteria and yeasts were characterized by free choice profiling and quantitative
    descriptive analysis. The respective results were used to modify the formulation
    and to select the fermentation cultures that were promising from a sensory point
    of view. Subsequent investigations allowed reducing sample dimensionality further,
    and the study was concluded by affective hedonic tests and a check-all-that-apply
    set-up performed by consumers. The final experiment also comprised a just-about-right
    approach performed for specifically evaluating spreadability. The outcome of the
    entire study indicates that it is possible to tailor attractive foods from by-products,
    provided that the need for final optimizations regarding palatability is considered.
article_number: '1489'
author:
- first_name: Harald
  full_name: Rohm, Harald
  last_name: Rohm
- first_name: Sophie
  full_name: Morejón Caraballo, Sophie
  last_name: Morejón Caraballo
- first_name: Ana
  full_name: Salvador, Ana
  last_name: Salvador
- first_name: Sofia
  full_name: Mendo, Sofia
  last_name: Mendo
- first_name: Empar
  full_name: Llorca, Empar
  last_name: Llorca
- first_name: Stefano
  full_name: Cattaneo, Stefano
  last_name: Cattaneo
- first_name: Ivano
  full_name: De Noni, Ivano
  last_name: De Noni
- first_name: Susanne
  full_name: Struck, Susanne
  id: '85030'
  last_name: Struck
  orcid: https://orcid.org/0000-0002-1281-5966
- first_name: Roberto
  full_name: Foschino, Roberto
  last_name: Foschino
- first_name: Isabel
  full_name: Hernando, Isabel
  last_name: Hernando
citation:
  ama: 'Rohm H, Morejón Caraballo S, Salvador A, et al. Sensory Properties of Fermented
    Blends of Sunflower Press Cake and Whey. <i>Foods : open access journal</i>. 2025;14(9).
    doi:<a href="https://doi.org/10.3390/foods14091489">10.3390/foods14091489</a>'
  apa: 'Rohm, H., Morejón Caraballo, S., Salvador, A., Mendo, S., Llorca, E., Cattaneo,
    S., De Noni, I., Struck, S., Foschino, R., &#38; Hernando, I. (2025). Sensory
    Properties of Fermented Blends of Sunflower Press Cake and Whey. <i>Foods : Open
    Access Journal</i>, <i>14</i>(9), Article 1489. <a href="https://doi.org/10.3390/foods14091489">https://doi.org/10.3390/foods14091489</a>'
  bjps: '<b>Rohm H <i>et al.</i></b> (2025) Sensory Properties of Fermented Blends
    of Sunflower Press Cake and Whey. <i>Foods : open access journal</i> <b>14</b>.'
  chicago: 'Rohm, Harald, Sophie Morejón Caraballo, Ana Salvador, Sofia Mendo, Empar
    Llorca, Stefano Cattaneo, Ivano De Noni, Susanne Struck, Roberto Foschino, and
    Isabel Hernando. “Sensory Properties of Fermented Blends of Sunflower Press Cake
    and Whey.” <i>Foods : Open Access Journal</i> 14, no. 9 (2025). <a href="https://doi.org/10.3390/foods14091489">https://doi.org/10.3390/foods14091489</a>.'
  chicago-de: 'Rohm, Harald, Sophie Morejón Caraballo, Ana Salvador, Sofia Mendo,
    Empar Llorca, Stefano Cattaneo, Ivano De Noni, Susanne Struck, Roberto Foschino
    und Isabel Hernando. 2025. Sensory Properties of Fermented Blends of Sunflower
    Press Cake and Whey. <i>Foods : open access journal</i> 14, Nr. 9. doi:<a href="https://doi.org/10.3390/foods14091489">10.3390/foods14091489</a>,
    .'
  din1505-2-1: '<span style="font-variant:small-caps;"><span style="font-variant:small-caps;">Rohm,
    Harald</span> ; <span style="font-variant:small-caps;">Morejón Caraballo, Sophie</span>
    ; <span style="font-variant:small-caps;">Salvador, Ana</span> ; <span style="font-variant:small-caps;">Mendo,
    Sofia</span> ; <span style="font-variant:small-caps;">Llorca, Empar</span> ; <span
    style="font-variant:small-caps;">Cattaneo, Stefano</span> ; <span style="font-variant:small-caps;">De
    Noni, Ivano</span> ; <span style="font-variant:small-caps;">Struck, Susanne</span>
    ; u. a.</span>: Sensory Properties of Fermented Blends of Sunflower Press Cake
    and Whey. In: <i>Foods : open access journal</i> Bd. 14. Basel, MDPI AG (2025),
    Nr. 9'
  havard: 'H. Rohm, S. Morejón Caraballo, A. Salvador, S. Mendo, E. Llorca, S. Cattaneo,
    I. De Noni, S. Struck, R. Foschino, I. Hernando, Sensory Properties of Fermented
    Blends of Sunflower Press Cake and Whey, Foods : Open Access Journal. 14 (2025).'
  ieee: 'H. Rohm <i>et al.</i>, “Sensory Properties of Fermented Blends of Sunflower
    Press Cake and Whey,” <i>Foods : open access journal</i>, vol. 14, no. 9, Art.
    no. 1489, 2025, doi: <a href="https://doi.org/10.3390/foods14091489">10.3390/foods14091489</a>.'
  mla: 'Rohm, Harald, et al. “Sensory Properties of Fermented Blends of Sunflower
    Press Cake and Whey.” <i>Foods : Open Access Journal</i>, vol. 14, no. 9, 1489,
    2025, <a href="https://doi.org/10.3390/foods14091489">https://doi.org/10.3390/foods14091489</a>.'
  short: 'H. Rohm, S. Morejón Caraballo, A. Salvador, S. Mendo, E. Llorca, S. Cattaneo,
    I. De Noni, S. Struck, R. Foschino, I. Hernando, Foods : Open Access Journal 14
    (2025).'
  ufg: '<b>Rohm, Harald u. a.</b>: Sensory Properties of Fermented Blends of Sunflower
    Press Cake and Whey, in: <i>Foods : open access journal</i> 14 (2025), H. 9.'
  van: 'Rohm H, Morejón Caraballo S, Salvador A, Mendo S, Llorca E, Cattaneo S, et
    al. Sensory Properties of Fermented Blends of Sunflower Press Cake and Whey. Foods :
    open access journal. 2025;14(9).'
date_created: 2025-04-25T12:30:10Z
date_updated: 2025-06-12T08:56:24Z
department:
- _id: DEP4008
- _id: DEP4028
doi: 10.3390/foods14091489
intvolume: '        14'
issue: '9'
keyword:
- food losses
- sustainability
- by-product utilization
- spreadability
language:
- iso: eng
place: Basel
publication: 'Foods : open access journal'
publication_identifier:
  eissn:
  - 2304-8158
publication_status: published
publisher: MDPI AG
status: public
title: Sensory Properties of Fermented Blends of Sunflower Press Cake and Whey
type: scientific_journal_article
user_id: '83781'
volume: 14
year: '2025'
...
---
_id: '11891'
abstract:
- lang: eng
  text: The aim of the present study was to texturise protein from sunflower press
    cake (SPC) for being consumed as dry snack or, in its hydrated state, as a meat
    analogue. In preliminary experiments, feed moisture (15–25 g 100 g−1) and extrusion
    temperature (180 °C–200 °C) were varied when processing commercial sunflower protein
    flour with a protein content of 51.8 g per 100 g dry matter using low moisture
    single-screw extrusion. The extrudates were analysed with regard to specific mechanical
    energy needs, texture properties in dry and hydrated state, colour, expansion
    ratio and water binding capacity. Extrusion parameters for achieving maximum expansion,
    textural force and minimal product moisture were found to be 180 °C and 15 g 100 g−1.
    Consequently, texturised protein was derived from deoiled SPC using these extrusion
    parameters. Initial deoiling of the press cake was necessary as it improved texturisation;
    a higher SME input reached led to increased cross-linking of the protein matrix.
    The light coloured and significantly expanded extrudates with high water binding
    capacity and could serve as basis for further development of snack products or
    meat analogues.
article_type: original
author:
- first_name: Sophie
  full_name: Morejon Caraballo, Sophie
  last_name: Morejon Caraballo
- first_name: Simon Vincent
  full_name: Fischer, Simon Vincent
  last_name: Fischer
- first_name: Klaudia
  full_name: Masztalerz, Klaudia
  last_name: Masztalerz
- first_name: Krzysztof
  full_name: Lech, Krzysztof
  last_name: Lech
- first_name: Harald
  full_name: Rohm, Harald
  last_name: Rohm
- first_name: Susanne
  full_name: Struck, Susanne
  id: '85030'
  last_name: Struck
  orcid: https://orcid.org/0000-0002-1281-5966
citation:
  ama: Morejon Caraballo S, Fischer SV, Masztalerz K, Lech K, Rohm H, Struck S. Low
    moisture texturised protein from sunflower press cake. <i>International journal
    of food science &#38; technology</i>. Published online 2024. doi:<a href="https://doi.org/
    https://doi.org/10.1111/ijfs.17513"> https://doi.org/10.1111/ijfs.17513</a>
  apa: Morejon Caraballo, S., Fischer, S. V., Masztalerz, K., Lech, K., Rohm, H.,
    &#38; Struck, S. (2024). Low moisture texturised protein from sunflower press cake.
    <i>International Journal of Food Science &#38; Technology</i>. <a href="https://doi.org/
    https://doi.org/10.1111/ijfs.17513">https://doi.org/ https://doi.org/10.1111/ijfs.17513</a>
  bjps: <b>Morejon Caraballo S <i>et al.</i></b> (2024) Low Moisture Texturised Protein
    from Sunflower Press Cake. <i>International journal of food science &#38; technology</i>.
  chicago: Morejon Caraballo, Sophie, Simon Vincent Fischer, Klaudia Masztalerz, Krzysztof
    Lech, Harald Rohm, and Susanne Struck. “Low Moisture Texturised Protein from Sunflower
    Press Cake.” <i>International Journal of Food Science &#38; Technology</i>, 2024.
    <a href="https://doi.org/ https://doi.org/10.1111/ijfs.17513">https://doi.org/
    https://doi.org/10.1111/ijfs.17513</a>.
  chicago-de: Morejon Caraballo, Sophie, Simon Vincent Fischer, Klaudia Masztalerz,
    Krzysztof Lech, Harald Rohm und Susanne Struck. 2024. Low moisture texturised
    protein from sunflower press cake. <i>International journal of food science &#38;
    technology</i>. doi:<a href="https://doi.org/ https://doi.org/10.1111/ijfs.17513">
    https://doi.org/10.1111/ijfs.17513</a>, .
  din1505-2-1: '<span style="font-variant:small-caps;">Morejon Caraballo, Sophie</span>
    ; <span style="font-variant:small-caps;">Fischer, Simon Vincent</span> ; <span
    style="font-variant:small-caps;">Masztalerz, Klaudia</span> ; <span style="font-variant:small-caps;">Lech,
    Krzysztof</span> ; <span style="font-variant:small-caps;">Rohm, Harald</span>
    ; <span style="font-variant:small-caps;">Struck, Susanne</span>: Low moisture
    texturised protein from sunflower press cake. In: <i>International journal of food
    science &#38; technology</i>. Oxford, Wiley-Blackwell (2024)'
  havard: S. Morejon Caraballo, S.V. Fischer, K. Masztalerz, K. Lech, H. Rohm, S.
    Struck, Low moisture texturised protein from sunflower press cake, International
    Journal of Food Science &#38; Technology. (2024).
  ieee: 'S. Morejon Caraballo, S. V. Fischer, K. Masztalerz, K. Lech, H. Rohm, and
    S. Struck, “Low moisture texturised protein from sunflower press cake,” <i>International
    journal of food science &#38; technology</i>, 2024, doi: <a href="https://doi.org/
    https://doi.org/10.1111/ijfs.17513"> https://doi.org/10.1111/ijfs.17513</a>.'
  mla: Morejon Caraballo, Sophie, et al. “Low Moisture Texturised Protein from Sunflower
    Press Cake.” <i>International Journal of Food Science &#38; Technology</i>, 2024,
    <a href="https://doi.org/ https://doi.org/10.1111/ijfs.17513">https://doi.org/
    https://doi.org/10.1111/ijfs.17513</a>.
  short: S. Morejon Caraballo, S.V. Fischer, K. Masztalerz, K. Lech, H. Rohm, S. Struck,
    International Journal of Food Science &#38; Technology (2024).
  ufg: '<b>Morejon Caraballo, Sophie u. a.</b>: Low moisture texturised protein from
    sunflower press cake, in: <i>International journal of food science &#38; technology</i>
    (2024).'
  van: Morejon Caraballo S, Fischer SV, Masztalerz K, Lech K, Rohm H, Struck S. Low
    moisture texturised protein from sunflower press cake. International journal of
    food science &#38; technology. 2024;
date_created: 2024-09-05T12:24:36Z
date_updated: 2024-12-04T13:35:53Z
department:
- _id: DEP4028
- _id: DEP4029
doi: ' https://doi.org/10.1111/ijfs.17513'
keyword:
- By-products
- extrusion
- meat analogue
language:
- iso: eng
main_file_link:
- open_access: '1'
  url: https://ifst.onlinelibrary.wiley.com/doi/epdf/10.1111/ijfs.17513
oa: '1'
place: Oxford
publication: International journal of food science & technology
publication_identifier:
  eissn:
  - 1365-2621
  issn:
  - 0950-5423
publication_status: epub_ahead
publisher: Wiley-Blackwell
quality_controlled: '1'
status: public
title: Low moisture texturised protein from sunflower press cake
type: scientific_journal_article
user_id: '83781'
year: '2024'
...
---
_id: '12836'
abstract:
- lang: eng
  text: The complexity of biodiesel aging has shown that the mechanism needs further
    research. The rate of aging product formation and associated interactions can
    help improve fuel quality. Since biodiesel is a multicomponent system and constant
    changes occur in the chemical environment, which interactions yield which products
    must be shown in more detail. Particularly under observation was the correlation
    between peroxides and epoxides. In addition, it is critical that the influence
    and interactions of new drop-in fuel candidates be investigated. In this work,
    the kinetics of the formation of aging products of methyl oleate (C18:1) are studied.
    The aim was to reduce the complexity in order to be able to make more precise
    and detailed statements about the mechanism. Ketones, acids, peroxide, and epoxide
    values were recorded. A distinction is made between pure methyl oleate and mixtures
    with 3 wt% isopropylidene glycerine (solketal). After solketal decomposed in the
    blends, the aging process showed changes. The influence of solketal resulted in
    a higher number of acids and epoxides over time. It implied that peroxides are
    not necessarily the precursor of epoxides. In summary, correlation and solketal’s
    influence showed that a sequence of aging products could be detected.
article_number: '3253'
author:
- first_name: Julian
  full_name: Türck, Julian
  last_name: Türck
- first_name: Fabian
  full_name: Schmitt, Fabian
  last_name: Schmitt
- first_name: Lukas
  full_name: Anthofer, Lukas
  last_name: Anthofer
- first_name: Anne
  full_name: Lichtinger, Anne
  last_name: Lichtinger
- first_name: Ralf
  full_name: Türck, Ralf
  last_name: Türck
- first_name: Wolfgang
  full_name: Ruck, Wolfgang
  last_name: Ruck
- first_name: Jürgen
  full_name: Krahl, Jürgen
  id: '68870'
  last_name: Krahl
citation:
  ama: 'Türck J, Schmitt F, Anthofer L, et al. Oxidation Kinetics of Neat Methyl Oleate
    and as a Blend with Solketal. <i>Energies : open-access journal of related scientific
    research, technology development and studies in policy and management</i>. 2023;16(7).
    doi:<a href="https://doi.org/10.3390/en16073253">10.3390/en16073253</a>'
  apa: 'Türck, J., Schmitt, F., Anthofer, L., Lichtinger, A., Türck, R., Ruck, W.,
    &#38; Krahl, J. (2023). Oxidation Kinetics of Neat Methyl Oleate and as a Blend
    with Solketal. <i>Energies : Open-Access Journal of Related Scientific Research,
    Technology Development and Studies in Policy and Management</i>, <i>16</i>(7),
    Article 3253. <a href="https://doi.org/10.3390/en16073253">https://doi.org/10.3390/en16073253</a>'
  bjps: '<b>Türck J <i>et al.</i></b> (2023) Oxidation Kinetics of Neat Methyl Oleate
    and as a Blend with Solketal. <i>Energies : open-access journal of related scientific
    research, technology development and studies in policy and management</i> <b>16</b>.'
  chicago: 'Türck, Julian, Fabian Schmitt, Lukas Anthofer, Anne Lichtinger, Ralf Türck,
    Wolfgang Ruck, and Jürgen Krahl. “Oxidation Kinetics of Neat Methyl Oleate and
    as a Blend with Solketal.” <i>Energies : Open-Access Journal of Related Scientific
    Research, Technology Development and Studies in Policy and Management</i> 16,
    no. 7 (2023). <a href="https://doi.org/10.3390/en16073253">https://doi.org/10.3390/en16073253</a>.'
  chicago-de: 'Türck, Julian, Fabian Schmitt, Lukas Anthofer, Anne Lichtinger, Ralf
    Türck, Wolfgang Ruck und Jürgen Krahl. 2023. Oxidation Kinetics of Neat Methyl
    Oleate and as a Blend with Solketal. <i>Energies : open-access journal of related
    scientific research, technology development and studies in policy and management</i>
    16, Nr. 7. doi:<a href="https://doi.org/10.3390/en16073253">10.3390/en16073253</a>,
    .'
  din1505-2-1: '<span style="font-variant:small-caps;">Türck, Julian</span> ; <span
    style="font-variant:small-caps;">Schmitt, Fabian</span> ; <span style="font-variant:small-caps;">Anthofer,
    Lukas</span> ; <span style="font-variant:small-caps;">Lichtinger, Anne</span>
    ; <span style="font-variant:small-caps;">Türck, Ralf</span> ; <span style="font-variant:small-caps;">Ruck,
    Wolfgang</span> ; <span style="font-variant:small-caps;">Krahl, Jürgen</span>:
    Oxidation Kinetics of Neat Methyl Oleate and as a Blend with Solketal. In: <i>Energies :
    open-access journal of related scientific research, technology development and
    studies in policy and management</i> Bd. 16. Basel, MDPI AG (2023), Nr. 7'
  havard: 'J. Türck, F. Schmitt, L. Anthofer, A. Lichtinger, R. Türck, W. Ruck, J.
    Krahl, Oxidation Kinetics of Neat Methyl Oleate and as a Blend with Solketal,
    Energies : Open-Access Journal of Related Scientific Research, Technology Development
    and Studies in Policy and Management. 16 (2023).'
  ieee: 'J. Türck <i>et al.</i>, “Oxidation Kinetics of Neat Methyl Oleate and as
    a Blend with Solketal,” <i>Energies : open-access journal of related scientific
    research, technology development and studies in policy and management</i>, vol.
    16, no. 7, Art. no. 3253, 2023, doi: <a href="https://doi.org/10.3390/en16073253">10.3390/en16073253</a>.'
  mla: 'Türck, Julian, et al. “Oxidation Kinetics of Neat Methyl Oleate and as a Blend
    with Solketal.” <i>Energies : Open-Access Journal of Related Scientific Research,
    Technology Development and Studies in Policy and Management</i>, vol. 16, no.
    7, 3253, 2023, <a href="https://doi.org/10.3390/en16073253">https://doi.org/10.3390/en16073253</a>.'
  short: 'J. Türck, F. Schmitt, L. Anthofer, A. Lichtinger, R. Türck, W. Ruck, J.
    Krahl, Energies : Open-Access Journal of Related Scientific Research, Technology
    Development and Studies in Policy and Management 16 (2023).'
  ufg: '<b>Türck, Julian u. a.</b>: Oxidation Kinetics of Neat Methyl Oleate and as
    a Blend with Solketal, in: <i>Energies : open-access journal of related scientific
    research, technology development and studies in policy and management</i> 16 (2023),
    H. 7.'
  van: 'Türck J, Schmitt F, Anthofer L, Lichtinger A, Türck R, Ruck W, et al. Oxidation
    Kinetics of Neat Methyl Oleate and as a Blend with Solketal. Energies : open-access
    journal of related scientific research, technology development and studies in
    policy and management. 2023;16(7).'
date_created: 2025-04-23T08:48:40Z
date_updated: 2025-06-25T13:13:39Z
department:
- _id: DEP1408
doi: 10.3390/en16073253
external_id:
  isi:
  - '000969447200001'
intvolume: '        16'
isi: '1'
issue: '7'
keyword:
- oxidation kinetics
- biodiesel aging
- methyl oleate
- solketal
- alcohol influence
- sequence of aging products
language:
- iso: eng
place: Basel
publication: 'Energies : open-access journal of related scientific research, technology
  development and studies in policy and management'
publication_identifier:
  eissn:
  - 1996-1073
publication_status: published
publisher: MDPI AG
status: public
title: Oxidation Kinetics of Neat Methyl Oleate and as a Blend with Solketal
type: scientific_journal_article
user_id: '83781'
volume: 16
year: '2023'
...
---
_id: '7986'
abstract:
- lang: eng
  text: Bioprocess development and optimization are still cost- and time-intensive
    due to the enormous number of experiments involved. In this study, the recently
    introduced model-assisted Design of Experiments (mDoE) concept (Möller et al.
    in Bioproc Biosyst Eng 42(5):867, https://doi.org/10.1007/s00449-019-02089-7,
    2019) was extended and implemented into a software (“mDoE-toolbox”) to significantly
    reduce the number of required cultivations. The application of the toolbox is
    exemplary shown in two case studies with Saccharomyces cerevisiae. In the first
    case study, a fed-batch process was optimized with respect to the pH value and
    linearly rising feeding rates of glucose and nitrogen source. Using the mDoE-toolbox,
    the biomass concentration was increased by 30% compared to previously performed
    experiments. The second case study was the whole-cell biocatalysis of ethyl acetoacetate
    (EAA) to (S)-ethyl-3-hydroxybutyrate (E3HB), for which the feeding rates of glucose,
    nitrogen source, and EAA were optimized. An increase of 80% compared to a previously
    performed experiment with similar initial conditions was achieved for the E3HB
    concentration.
author:
- first_name: André
  full_name: Moser, André
  last_name: Moser
- first_name: Kim B.
  full_name: Kuchemüller, Kim B.
  last_name: Kuchemüller
- first_name: Sahar
  full_name: Deppe, Sahar
  last_name: Deppe
- first_name: Tanja
  full_name: Hernández Rodriguez, Tanja
  id: '52466'
  last_name: Hernández Rodriguez
- first_name: Björn
  full_name: Frahm, Björn
  id: '45666'
  last_name: Frahm
- first_name: Ralf
  full_name: Pörtner, Ralf
  last_name: Pörtner
- first_name: Volker C.
  full_name: Hass, Volker C.
  last_name: Hass
- first_name: Johannes
  full_name: Möller, Johannes
  last_name: Möller
citation:
  ama: 'Moser A, Kuchemüller KB, Deppe S, et al. Model-assisted DoE software: Optimization
    of growth and biocatalysis in Saccharomyces cerevisiae bioprocesses. <i>Bioprocess
    and Biosystems Engineering</i>. 2021;44(4):683-700. doi:<a href="https://doi.org/10.1007/s00449-020-02478-3">10.1007/s00449-020-02478-3</a>'
  apa: 'Moser, A., Kuchemüller, K. B., Deppe, S., Hernández Rodriguez, T., Frahm,
    B., Pörtner, R., Hass, V. C., &#38; Möller, J. (2021). Model-assisted DoE software:
    Optimization of growth and biocatalysis in Saccharomyces cerevisiae bioprocesses.
    <i>Bioprocess and Biosystems Engineering</i>, <i>44</i>(4), 683–700. <a href="https://doi.org/10.1007/s00449-020-02478-3">https://doi.org/10.1007/s00449-020-02478-3</a>'
  bjps: '<b>Moser A <i>et al.</i></b> (2021) Model-Assisted DoE Software: Optimization
    of Growth and Biocatalysis in Saccharomyces Cerevisiae Bioprocesses. <i>Bioprocess
    and Biosystems Engineering</i> <b>44</b>, 683–700.'
  chicago: 'Moser, André, Kim B. Kuchemüller, Sahar Deppe, Tanja Hernández Rodriguez,
    Björn Frahm, Ralf Pörtner, Volker C. Hass, and Johannes Möller. “Model-Assisted
    DoE Software: Optimization of Growth and Biocatalysis in Saccharomyces Cerevisiae
    Bioprocesses.” <i>Bioprocess and Biosystems Engineering</i> 44, no. 4 (2021):
    683–700. <a href="https://doi.org/10.1007/s00449-020-02478-3">https://doi.org/10.1007/s00449-020-02478-3</a>.'
  chicago-de: 'Moser, André, Kim B. Kuchemüller, Sahar Deppe, Tanja Hernández Rodriguez,
    Björn Frahm, Ralf Pörtner, Volker C. Hass und Johannes Möller. 2021. Model-assisted
    DoE software: Optimization of growth and biocatalysis in Saccharomyces cerevisiae
    bioprocesses. <i>Bioprocess and Biosystems Engineering</i> 44, Nr. 4: 683–700.
    doi:<a href="https://doi.org/10.1007/s00449-020-02478-3">10.1007/s00449-020-02478-3</a>,
    .'
  din1505-2-1: '<span style="font-variant:small-caps;">Moser, André</span> ; <span
    style="font-variant:small-caps;">Kuchemüller, Kim B.</span> ; <span style="font-variant:small-caps;">Deppe,
    Sahar</span> ; <span style="font-variant:small-caps;">Hernández Rodriguez, Tanja</span>
    ; <span style="font-variant:small-caps;">Frahm, Björn</span> ; <span style="font-variant:small-caps;">Pörtner,
    Ralf</span> ; <span style="font-variant:small-caps;">Hass, Volker C.</span> ;
    <span style="font-variant:small-caps;">Möller, Johannes</span>: Model-assisted
    DoE software: Optimization of growth and biocatalysis in Saccharomyces cerevisiae
    bioprocesses. In: <i>Bioprocess and Biosystems Engineering</i> Bd. 44. Berlin ;
    Heidelberg [u.a.], Springer (2021), Nr. 4, S. 683–700'
  havard: 'A. Moser, K.B. Kuchemüller, S. Deppe, T. Hernández Rodriguez, B. Frahm,
    R. Pörtner, V.C. Hass, J. Möller, Model-assisted DoE software: Optimization of
    growth and biocatalysis in Saccharomyces cerevisiae bioprocesses, Bioprocess and
    Biosystems Engineering. 44 (2021) 683–700.'
  ieee: 'A. Moser <i>et al.</i>, “Model-assisted DoE software: Optimization of growth
    and biocatalysis in Saccharomyces cerevisiae bioprocesses,” <i>Bioprocess and
    Biosystems Engineering</i>, vol. 44, no. 4, pp. 683–700, 2021, doi: <a href="https://doi.org/10.1007/s00449-020-02478-3">10.1007/s00449-020-02478-3</a>.'
  mla: 'Moser, André, et al. “Model-Assisted DoE Software: Optimization of Growth
    and Biocatalysis in Saccharomyces Cerevisiae Bioprocesses.” <i>Bioprocess and
    Biosystems Engineering</i>, vol. 44, no. 4, 2021, pp. 683–700, <a href="https://doi.org/10.1007/s00449-020-02478-3">https://doi.org/10.1007/s00449-020-02478-3</a>.'
  short: A. Moser, K.B. Kuchemüller, S. Deppe, T. Hernández Rodriguez, B. Frahm, R.
    Pörtner, V.C. Hass, J. Möller, Bioprocess and Biosystems Engineering 44 (2021)
    683–700.
  ufg: '<b>Moser, André u. a.</b>: Model-assisted DoE software: Optimization of growth
    and biocatalysis in Saccharomyces cerevisiae bioprocesses, in: <i>Bioprocess and
    Biosystems Engineering</i> 44 (2021), H. 4,  S. 683–700.'
  van: 'Moser A, Kuchemüller KB, Deppe S, Hernández Rodriguez T, Frahm B, Pörtner
    R, et al. Model-assisted DoE software: Optimization of growth and biocatalysis
    in Saccharomyces cerevisiae bioprocesses. Bioprocess and Biosystems Engineering.
    2021;44(4):683–700.'
date_created: 2022-05-05T13:10:11Z
date_updated: 2023-08-21T07:55:05Z
department:
- _id: DEP4021
doi: 10.1007/s00449-020-02478-3
intvolume: '        44'
issue: '4'
keyword:
- Biocatalysis
- Monte Carlo methods
- Fed-batch strategy
- Model-assisted design of experiments
- Quality by design
language:
- iso: eng
page: 683-700
place: Berlin ; Heidelberg [u.a.]
publication: Bioprocess and Biosystems Engineering
publication_identifier:
  eissn:
  - 1615-7605
  isbn:
  - 1615-7591
publication_status: published
publisher: Springer
quality_controlled: '1'
status: public
title: 'Model-assisted DoE software: Optimization of growth and biocatalysis in Saccharomyces
  cerevisiae bioprocesses'
type: scientific_journal_article
user_id: '83781'
volume: 44
year: '2021'
...
---
_id: '4094'
abstract:
- lang: eng
  text: Projection-based assitive systems that guide users through assembly work are
    on their way to industrial application. Previous research work investigated how
    people can be supported with such systems. However, there has been little work
    on the question on how to generate and author sequential instructions for assitive
    systems. In this paper, we present a new concept and a prototypical implementation
    of an assitive system that can be taught by demonstrating an assembly process.
    By using a combination of RGB and depth cameras, we can generate an assembly instruction
    of Lego Duplo bricks based on the demonstration of a user. This generated manual
    can later on be used for assisting other users in the assembly process. By our
    prototype system, we show the technological feasibility of assistive systems that
    can learn from users.
author:
- first_name: Sebastian
  full_name: Büttner, Sebastian
  id: '61868'
  last_name: Büttner
- first_name: Andreas
  full_name: Peda, Andreas
  id: '51144'
  last_name: Peda
- first_name: Mario
  full_name: Heinz, Mario
  id: '68913'
  last_name: Heinz
- first_name: Carsten
  full_name: Röcker, Carsten
  id: '61525'
  last_name: Röcker
citation:
  ama: 'Büttner S, Peda A, Heinz M, Röcker C. Teaching by Demonstrating – How Smart
    Assistive Systems Can Learn from Users. In: <i>22nd International Conference on
    Human-Computer Interaction</i>. Vol 12203. Lecture Notes in Computer Science.
    Springer; 2020:153-163. doi:<a href="https://doi.org/10.1007/978-3-030-50344-4_12">https://doi.org/10.1007/978-3-030-50344-4_12</a>'
  apa: Büttner, S., Peda, A., Heinz, M., &#38; Röcker, C. (2020). Teaching by Demonstrating
    – How Smart Assistive Systems Can Learn from Users. <i>22nd International Conference
    on Human-Computer Interaction</i>, <i>12203</i>, 153–163. <a href="https://doi.org/10.1007/978-3-030-50344-4_12">https://doi.org/10.1007/978-3-030-50344-4_12</a>
  bjps: '<b>Büttner S <i>et al.</i></b> (2020) Teaching by Demonstrating – How Smart
    Assistive Systems Can Learn from Users. <i>22nd International Conference on Human-Computer
    Interaction</i>, vol. 12203. Berlin: Springer, pp. 153–163.'
  chicago: 'Büttner, Sebastian, Andreas Peda, Mario Heinz, and Carsten Röcker. “Teaching
    by Demonstrating – How Smart Assistive Systems Can Learn from Users.” In <i>22nd
    International Conference on Human-Computer Interaction</i>, 12203:153–63. Lecture
    Notes in Computer Science. Berlin: Springer, 2020. <a href="https://doi.org/10.1007/978-3-030-50344-4_12">https://doi.org/10.1007/978-3-030-50344-4_12</a>.'
  chicago-de: 'Büttner, Sebastian, Andreas Peda, Mario Heinz und Carsten Röcker. 2020.
    Teaching by Demonstrating – How Smart Assistive Systems Can Learn from Users.
    In: <i>22nd International Conference on Human-Computer Interaction</i>, 12203:153–163.
    Lecture Notes in Computer Science. Berlin: Springer. doi:<a href="https://doi.org/10.1007/978-3-030-50344-4_12">https://doi.org/10.1007/978-3-030-50344-4_12</a>,
    .'
  din1505-2-1: '<span style="font-variant:small-caps;">Büttner, Sebastian</span> ;
    <span style="font-variant:small-caps;">Peda, Andreas</span> ; <span style="font-variant:small-caps;">Heinz,
    Mario</span> ; <span style="font-variant:small-caps;">Röcker, Carsten</span>:
    Teaching by Demonstrating – How Smart Assistive Systems Can Learn from Users.
    In: <i>22nd International Conference on Human-Computer Interaction</i>, <i>Lecture
    Notes in Computer Science</i>. Bd. 12203. Berlin : Springer, 2020, S. 153–163'
  havard: 'S. Büttner, A. Peda, M. Heinz, C. Röcker, Teaching by Demonstrating – How
    Smart Assistive Systems Can Learn from Users, in: 22nd International Conference
    on Human-Computer Interaction, Springer, Berlin, 2020: pp. 153–163.'
  ieee: 'S. Büttner, A. Peda, M. Heinz, and C. Röcker, “Teaching by Demonstrating
    – How Smart Assistive Systems Can Learn from Users,” in <i>22nd International
    Conference on Human-Computer Interaction</i>, Copenhagen, Denmark, 2020, vol.
    12203, pp. 153–163. doi: <a href="https://doi.org/10.1007/978-3-030-50344-4_12">https://doi.org/10.1007/978-3-030-50344-4_12</a>.'
  mla: Büttner, Sebastian, et al. “Teaching by Demonstrating – How Smart Assistive
    Systems Can Learn from Users.” <i>22nd International Conference on Human-Computer
    Interaction</i>, vol. 12203, Springer, 2020, pp. 153–63, <a href="https://doi.org/10.1007/978-3-030-50344-4_12">https://doi.org/10.1007/978-3-030-50344-4_12</a>.
  short: 'S. Büttner, A. Peda, M. Heinz, C. Röcker, in: 22nd International Conference
    on Human-Computer Interaction, Springer, Berlin, 2020, pp. 153–163.'
  ufg: '<b>Büttner, Sebastian u. a.</b>: Teaching by Demonstrating – How Smart Assistive
    Systems Can Learn from Users, in: o. Hg.: 22nd International Conference on Human-Computer
    Interaction, Bd. 12203, Berlin 2020 (Lecture Notes in Computer Science),  S. 153–163.'
  van: 'Büttner S, Peda A, Heinz M, Röcker C. Teaching by Demonstrating – How Smart
    Assistive Systems Can Learn from Users. In: 22nd International Conference on Human-Computer
    Interaction. Berlin: Springer; 2020. p. 153–63. (Lecture Notes in Computer Science;
    vol. 12203).'
conference:
  end_date: 2020-07-24
  location: Copenhagen, Denmark
  name: 22nd International Conference on Human-Computer Interaction
  start_date: 2020-07-19
date_created: 2020-11-26T14:10:00Z
date_updated: 2025-06-26T08:59:53Z
department:
- _id: DEP5023
doi: https://doi.org/10.1007/978-3-030-50344-4_12
intvolume: '     12203'
keyword:
- Assitive system
- Authoring
- Instruction generation
- Computer vision
- Teaching by demonstration
language:
- iso: eng
main_file_link:
- open_access: '1'
  url: https://link.springer.com/chapter/10.1007/978-3-030-50344-4_12
oa: '1'
page: 153-163
place: Berlin
publication: 22nd International Conference on Human-Computer Interaction
publication_identifier:
  eisbn:
  - 978-3-030-50344-4
  isbn:
  - 978-3-030-50343-7
publication_status: published
publisher: Springer
series_title: Lecture Notes in Computer Science
status: public
title: Teaching by Demonstrating – How Smart Assistive Systems Can Learn from Users
type: conference
user_id: '83781'
volume: 12203
year: '2020'
...
---
_id: '7783'
abstract:
- lang: eng
  text: The digitization of the industry, the drive towards smart factories as well
    as the Internet of Production (IoP) require rising smartness of products and services.
    Smart physical products are often mechatronic products that include increasing
    amounts of software. The development of software, however, comes along with new
    challenges for companies specialized in developing mechanical, electrical or electronic
    products. Some of these challenges address the product lifecycle management (PLM)-related
    business and work processes. The management of software lifecycles requires a
    much more rigorous requirements management. Furthermore, special solutions for
    management of source code in distributed development teams are needed. The build-process
    and testing activities need to be conducted in a systematic manner. The generation
    and provision of different licensing models need to be mastered and finally the
    issue of security needs to be addressed for any product that can be networked---which
    by the way is a strategic target of nearly any product developing company. Application
    Lifecycle Management (ALM) covers many of the above-mentioned issues. IT solutions
    for ALM are comparable to traditional PLM solutions, but focus particularly on
    software as a product. Thus, these systems have become widely used by software
    companies in the same manner as PLM solutions belong to the standard enterprise
    IT environment of companies developing physical products. With software penetrating
    traditional physical products, product managers, product developers, manufacturing
    staff etc. need to work with both, PLM and ALM, since neither solution is able
    to cover both domains sufficiently. However, ALM and PLM solutions feature redundant
    functionality. Thus, best practices for the systematic integration of ALM and
    PLM are required.
author:
- first_name: Andreas
  full_name: Deuter, Andreas
  id: '62088'
  last_name: Deuter
  orcid: 0000-0002-6529-6215
- first_name: Andreas
  full_name: Otte, Andreas
  id: '51466'
  last_name: Otte
- first_name: Marcel
  full_name: Ebert, Marcel
  last_name: Ebert
- first_name: Frank
  full_name: Possel-Dölken, Frank
  last_name: Possel-Dölken
citation:
  ama: 'Deuter A, Otte A, Ebert M, Possel-Dölken F. Developing the Requirements of
    a PLM/ALM Integration: An Industrial Case Study. In: Stark J, ed. <i>Product Lifecycle
    Management (Volume 4)</i>. Decision Engineering. Springer; 2019:125-143. doi:<a
    href="https://doi.org/10.1007/978-3-030-16134-7_11">10.1007/978-3-030-16134-7_11</a>'
  apa: 'Deuter, A., Otte, A., Ebert, M., &#38; Possel-Dölken, F. (2019). Developing
    the Requirements of a PLM/ALM Integration: An Industrial Case Study. In J. Stark
    (Ed.), <i>Product lifecycle management (Volume 4)</i> (pp. 125–143). Springer.
    <a href="https://doi.org/10.1007/978-3-030-16134-7_11">https://doi.org/10.1007/978-3-030-16134-7_11</a>'
  bjps: '<b>Deuter A <i>et al.</i></b> (2019) Developing the Requirements of a PLM/ALM
    Integration: An Industrial Case Study. In Stark J (ed.), <i>Product Lifecycle
    Management (Volume 4)</i>. Cham, Switzerland: Springer, pp. 125–143.'
  chicago: 'Deuter, Andreas, Andreas Otte, Marcel Ebert, and Frank Possel-Dölken.
    “Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study.”
    In <i>Product Lifecycle Management (Volume 4)</i>, edited by John Stark, 125–43.
    Decision Engineering. Cham, Switzerland: Springer, 2019. <a href="https://doi.org/10.1007/978-3-030-16134-7_11">https://doi.org/10.1007/978-3-030-16134-7_11</a>.'
  chicago-de: 'Deuter, Andreas, Andreas Otte, Marcel Ebert und Frank Possel-Dölken.
    2019. Developing the Requirements of a PLM/ALM Integration: An Industrial Case
    Study. In: <i>Product lifecycle management (Volume 4)</i>, hg. von John Stark,
    125–143. Decision Engineering. Cham, Switzerland: Springer. doi:<a href="https://doi.org/10.1007/978-3-030-16134-7_11">10.1007/978-3-030-16134-7_11</a>,
    .'
  din1505-2-1: '<span style="font-variant:small-caps;">Deuter, Andreas</span> ; <span
    style="font-variant:small-caps;">Otte, Andreas</span> ; <span style="font-variant:small-caps;">Ebert,
    Marcel</span> ; <span style="font-variant:small-caps;">Possel-Dölken, Frank</span>:
    Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study.
    In: <span style="font-variant:small-caps;">Stark, J.</span> (Hrsg.): <i>Product
    lifecycle management (Volume 4)</i>, <i>Decision Engineering</i>. Cham, Switzerland :
    Springer, 2019, S. 125–143'
  havard: 'A. Deuter, A. Otte, M. Ebert, F. Possel-Dölken, Developing the Requirements
    of a PLM/ALM Integration: An Industrial Case Study, in: J. Stark (Ed.), Product
    Lifecycle Management (Volume 4), Springer, Cham, Switzerland, 2019: pp. 125–143.'
  ieee: 'A. Deuter, A. Otte, M. Ebert, and F. Possel-Dölken, “Developing the Requirements
    of a PLM/ALM Integration: An Industrial Case Study,” in <i>Product lifecycle management
    (Volume 4)</i>, J. Stark, Ed. Cham, Switzerland: Springer, 2019, pp. 125–143.
    doi: <a href="https://doi.org/10.1007/978-3-030-16134-7_11">10.1007/978-3-030-16134-7_11</a>.'
  mla: 'Deuter, Andreas, et al. “Developing the Requirements of a PLM/ALM Integration:
    An Industrial Case Study.” <i>Product Lifecycle Management (Volume 4)</i>, edited
    by John Stark, Springer, 2019, pp. 125–43, <a href="https://doi.org/10.1007/978-3-030-16134-7_11">https://doi.org/10.1007/978-3-030-16134-7_11</a>.'
  short: 'A. Deuter, A. Otte, M. Ebert, F. Possel-Dölken, in: J. Stark (Ed.), Product
    Lifecycle Management (Volume 4), Springer, Cham, Switzerland, 2019, pp. 125–143.'
  ufg: '<b>Deuter, Andreas u. a.</b>: Developing the Requirements of a PLM/ALM Integration:
    An Industrial Case Study, in: <i>Stark, John (Hg.)</i>: Product lifecycle management
    (Volume 4), Cham, Switzerland 2019 (Decision Engineering),  S. 125–143.'
  van: 'Deuter A, Otte A, Ebert M, Possel-Dölken F. Developing the Requirements of
    a PLM/ALM Integration: An Industrial Case Study. In: Stark J, editor. Product
    lifecycle management (Volume 4). Cham, Switzerland: Springer; 2019. p. 125–43.
    (Decision Engineering).'
date_created: 2022-04-25T10:46:14Z
date_updated: 2025-06-26T13:40:03Z
department:
- _id: DEP7022
- _id: DEP1306
doi: 10.1007/978-3-030-16134-7_11
editor:
- first_name: John
  full_name: Stark, John
  last_name: Stark
keyword:
- Product lifecycle management
- Application Lifecycle Management
- Smart products
- Systems engineering
language:
- iso: eng
page: 125-143
place: Cham, Switzerland
publication: Product lifecycle management (Volume 4)
publication_identifier:
  eisbn:
  - 978-3-030-16134-7
  eissn:
  - 2197-6589
  isbn:
  - 978-3-030-16133-0
  issn:
  - 1619-5736
publication_status: published
publisher: Springer
series_title: Decision Engineering
status: public
title: 'Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study'
type: book_chapter
user_id: '83781'
year: '2019'
...
---
_id: '4320'
abstract:
- lang: eng
  text: The use of Assistive Technology (AT) plays a significant role in the advancement
    of greater independence for individuals with disabilities in their work life.
    In particular, digital step-by-step support can enable people to perform production
    tasks that were formerly difficult to accomplish. In this paper, we focused on
    finding a solution for a specific production process. To this end, we set up a
    prototype assistive system for performing a cutting task which provides step-by-step
    support for people with disabilities. In an evaluation study with impaired people,
    we investigated how our assistive system affects the task efficiency as well as
    participants’ subjective evaluation of perceived mental effort and system usability.
    Results show advantages for step-by-step support with regard to users’ task efficiency
    and subjective evaluation.
author:
- first_name: Volkan
  full_name: Aksu, Volkan
  last_name: Aksu
- first_name: Sascha
  full_name: Jenderny, Sascha
  last_name: Jenderny
- first_name: Sascha
  full_name: Martinez, Sascha
  last_name: Martinez
- first_name: Carsten
  full_name: Röcker, Carsten
  id: '61525'
  last_name: Röcker
citation:
  ama: 'Aksu V, Jenderny S, Martinez S, Röcker C. A Digital Assistance System Providing
    Step-by-Step Support for People with Disabilities in Production Tasks. In: Ahram
    TZ, Falcão C, eds. <i>Advances in Usability, User Experience and Assistive Technology</i>.
    Vol 794. Advances in Intelligent Systems and Computing. Cham: Springer; 2018:775-785.
    doi:<a href="https://doi.org/10.1007/978-3-319-94947-5_76">10.1007/978-3-319-94947-5_76</a>'
  apa: 'Aksu, V., Jenderny, S., Martinez, S., &#38; Röcker, C. (2018). A Digital Assistance
    System Providing Step-by-Step Support for People with Disabilities in Production
    Tasks. In T. Z. Ahram &#38; C. Falcão (Eds.), <i>Advances in Usability, User Experience
    and Assistive Technology</i> (Vol. 794, pp. 775–785). Cham: Springer. <a href="https://doi.org/10.1007/978-3-319-94947-5_76">https://doi.org/10.1007/978-3-319-94947-5_76</a>'
  bjps: '<b>Aksu V <i>et al.</i></b> (2018) A Digital Assistance System Providing
    Step-by-Step Support for People with Disabilities in Production Tasks. In Ahram
    TZ and Falcão C (eds), <i>Advances in Usability, User Experience and Assistive
    Technology</i>, vol. 794. Cham: Springer, pp. 775–785.'
  chicago: 'Aksu, Volkan, Sascha Jenderny, Sascha Martinez, and Carsten Röcker. “A
    Digital Assistance System Providing Step-by-Step Support for People with Disabilities
    in Production Tasks.” In <i>Advances in Usability, User Experience and Assistive
    Technology</i>, edited by Tareq Z. Ahram and Christianne Falcão, 794:775–85. Advances
    in Intelligent Systems and Computing. Cham: Springer, 2018. <a href="https://doi.org/10.1007/978-3-319-94947-5_76">https://doi.org/10.1007/978-3-319-94947-5_76</a>.'
  chicago-de: 'Aksu, Volkan, Sascha Jenderny, Sascha Martinez und Carsten Röcker.
    2018. A Digital Assistance System Providing Step-by-Step Support for People with
    Disabilities in Production Tasks. In: <i>Advances in Usability, User Experience
    and Assistive Technology</i>, hg. von Tareq Z. Ahram und Christianne Falcão, 794:775–785.
    Advances in Intelligent Systems and Computing. Cham: Springer. doi:<a href="https://doi.org/10.1007/978-3-319-94947-5_76,">10.1007/978-3-319-94947-5_76,</a>
    .'
  din1505-2-1: '<span style="font-variant:small-caps;">Aksu, Volkan</span> ; <span
    style="font-variant:small-caps;">Jenderny, Sascha</span> ; <span style="font-variant:small-caps;">Martinez,
    Sascha</span> ; <span style="font-variant:small-caps;">Röcker, Carsten</span>:
    A Digital Assistance System Providing Step-by-Step Support for People with Disabilities
    in Production Tasks. In: <span style="font-variant:small-caps;">Ahram, T. Z.</span>
    ; <span style="font-variant:small-caps;">Falcão, C.</span> (Hrsg.): <i>Advances
    in Usability, User Experience and Assistive Technology</i>, <i>Advances in Intelligent
    Systems and Computing</i>. Bd. 794. Cham : Springer, 2018, S. 775–785'
  havard: 'V. Aksu, S. Jenderny, S. Martinez, C. Röcker, A Digital Assistance System
    Providing Step-by-Step Support for People with Disabilities in Production Tasks,
    in: T.Z. Ahram, C. Falcão (Eds.), Advances in Usability, User Experience and Assistive
    Technology, Springer, Cham, 2018: pp. 775–785.'
  ieee: V. Aksu, S. Jenderny, S. Martinez, and C. Röcker, “A Digital Assistance System
    Providing Step-by-Step Support for People with Disabilities in Production Tasks,”
    in <i>Advances in Usability, User Experience and Assistive Technology</i>, Orlando,
    Florida, USA, 2018, vol. 794, pp. 775–785.
  mla: Aksu, Volkan, et al. “A Digital Assistance System Providing Step-by-Step Support
    for People with Disabilities in Production Tasks.” <i>Advances in Usability, User
    Experience and Assistive Technology</i>, edited by Tareq Z. Ahram and Christianne
    Falcão, vol. 794, Springer, 2018, pp. 775–85, doi:<a href="https://doi.org/10.1007/978-3-319-94947-5_76">10.1007/978-3-319-94947-5_76</a>.
  short: 'V. Aksu, S. Jenderny, S. Martinez, C. Röcker, in: T.Z. Ahram, C. Falcão
    (Eds.), Advances in Usability, User Experience and Assistive Technology, Springer,
    Cham, 2018, pp. 775–785.'
  ufg: '<b>Aksu, Volkan et. al. (2018)</b>: A Digital Assistance System Providing
    Step-by-Step Support for People with Disabilities in Production Tasks, in: Tareq
    Z. Ahram/Christianne Falcão (Hgg.): <i>Advances in Usability, User Experience
    and Assistive Technology</i> (=<i>Advances in Intelligent Systems and Computing
    794</i>), Cham, S. 775–785.'
  van: 'Aksu V, Jenderny S, Martinez S, Röcker C. A Digital Assistance System Providing
    Step-by-Step Support for People with Disabilities in Production Tasks. In: Ahram
    TZ, Falcão C, editors. Advances in Usability, User Experience and Assistive Technology.
    Cham: Springer; 2018. p. 775–85. (Advances in Intelligent Systems and Computing;
    vol. 794).'
conference:
  end_date: 2018-07-25
  location: Orlando, Florida, USA
  name: 2018 International Conferences on Usability & User Experience and Human Factors
    and Assistive Technology ; AHFE 2018
  start_date: 2018-07-21
date_created: 2021-01-08T08:26:20Z
date_updated: 2023-03-15T13:49:52Z
department:
- _id: DEP5023
doi: 10.1007/978-3-319-94947-5_76
editor:
- first_name: Tareq Z.
  full_name: Ahram, Tareq Z.
  last_name: Ahram
- first_name: Christianne
  full_name: Falcão, Christianne
  last_name: Falcão
intvolume: '       794'
keyword:
- Assistive Technology
- People with disabilities
- User-centered
- Design
- Human-computer-interaction
- Production Step-by-step instructions
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 775-785
place: Cham
publication: Advances in Usability, User Experience and Assistive Technology
publication_identifier:
  eisbn:
  - 978-3-319-94947-5
  isbn:
  - 978-3-319-94946-8
publication_status: published
publisher: Springer
series_title: Advances in Intelligent Systems and Computing
status: public
title: A Digital Assistance System Providing Step-by-Step Support for People with
  Disabilities in Production Tasks
type: conference
user_id: '15514'
volume: 794
year: 2018
...
---
_id: '4321'
abstract:
- lang: eng
  text: Recent research has shown that computer-based Assistive Technology (AT) has
    the potential to support individuals with disabilities in production environments.
    At the same time, step-by-step instructions enable workers to be successful in
    their performance of industrial tasks that were formerly difficult to accomplish.
    We merged these two types of intervention and developed an application running
    on a mobile device that can assist disabled workers working more independently.
    In an evaluation study, we investigated how our assistive system affects the task
    efficiency as well as participants’ subjective evaluation. Results show advantages
    when using the assistive prototype with regard to users’ task efficiency and subjective
    evaluations.
author:
- first_name: Volkan
  full_name: Aksu, Volkan
  last_name: Aksu
- first_name: Sascha
  full_name: Jenderny, Sascha
  last_name: Jenderny
- first_name: Sascha
  full_name: Martinez, Sascha
  last_name: Martinez
- first_name: Carsten
  full_name: Röcker, Carsten
  id: '61525'
  last_name: Röcker
citation:
  ama: 'Aksu V, Jenderny S, Martinez S, Röcker C. Providing Context-Sensitive Mobile
    Assistance for People with Disabilities in the Workplace. In: Di Bucchianico G,
    ed. <i>Providing Context-Sensitive Mobile Assistance for People with Disabilities
    in the Workplace</i>. Vol 776. Advances in Intelligent Systems and Computing.
    Cham: Springer; 2018:3-14. doi:<a href="https://doi.org/10.1007/978-3-319-94622-1_1">10.1007/978-3-319-94622-1_1</a>'
  apa: 'Aksu, V., Jenderny, S., Martinez, S., &#38; Röcker, C. (2018). Providing Context-Sensitive
    Mobile Assistance for People with Disabilities in the Workplace. In G. Di Bucchianico
    (Ed.), <i>Providing Context-Sensitive Mobile Assistance for People with Disabilities
    in the Workplace</i> (Vol. 776, pp. 3–14). Cham: Springer. <a href="https://doi.org/10.1007/978-3-319-94622-1_1">https://doi.org/10.1007/978-3-319-94622-1_1</a>'
  bjps: '<b>Aksu V <i>et al.</i></b> (2018) Providing Context-Sensitive Mobile Assistance
    for People with Disabilities in the Workplace. In Di Bucchianico G (ed.), <i>Providing
    Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace</i>,
    vol. 776. Cham: Springer, pp. 3–14.'
  chicago: 'Aksu, Volkan, Sascha Jenderny, Sascha Martinez, and Carsten Röcker. “Providing
    Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace.”
    In <i>Providing Context-Sensitive Mobile Assistance for People with Disabilities
    in the Workplace</i>, edited by Giuseppe  Di Bucchianico, 776:3–14. Advances in
    Intelligent Systems and Computing. Cham: Springer, 2018. <a href="https://doi.org/10.1007/978-3-319-94622-1_1">https://doi.org/10.1007/978-3-319-94622-1_1</a>.'
  chicago-de: 'Aksu, Volkan, Sascha Jenderny, Sascha Martinez und Carsten Röcker.
    2018. Providing Context-Sensitive Mobile Assistance for People with Disabilities
    in the Workplace. In: <i>Providing Context-Sensitive Mobile Assistance for People
    with Disabilities in the Workplace</i>, hg. von Giuseppe  Di Bucchianico, 776:3–14.
    Advances in Intelligent Systems and Computing. Cham: Springer. doi:<a href="https://doi.org/10.1007/978-3-319-94622-1_1,">10.1007/978-3-319-94622-1_1,</a>
    .'
  din1505-2-1: '<span style="font-variant:small-caps;">Aksu, Volkan</span> ; <span
    style="font-variant:small-caps;">Jenderny, Sascha</span> ; <span style="font-variant:small-caps;">Martinez,
    Sascha</span> ; <span style="font-variant:small-caps;">Röcker, Carsten</span>:
    Providing Context-Sensitive Mobile Assistance for People with Disabilities in
    the Workplace. In: <span style="font-variant:small-caps;">Di Bucchianico, G.</span>
    (Hrsg.): <i>Providing Context-Sensitive Mobile Assistance for People with Disabilities
    in the Workplace</i>, <i>Advances in Intelligent Systems and Computing</i>. Bd.
    776. Cham : Springer, 2018, S. 3–14'
  havard: 'V. Aksu, S. Jenderny, S. Martinez, C. Röcker, Providing Context-Sensitive
    Mobile Assistance for People with Disabilities in the Workplace, in: G. Di Bucchianico
    (Ed.), Providing Context-Sensitive Mobile Assistance for People with Disabilities
    in the Workplace, Springer, Cham, 2018: pp. 3–14.'
  ieee: V. Aksu, S. Jenderny, S. Martinez, and C. Röcker, “Providing Context-Sensitive
    Mobile Assistance for People with Disabilities in the Workplace,” in <i>Providing
    Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace</i>,
    Orlando, Florida, USA, 2018, vol. 776, pp. 3–14.
  mla: Aksu, Volkan, et al. “Providing Context-Sensitive Mobile Assistance for People
    with Disabilities in the Workplace.” <i>Providing Context-Sensitive Mobile Assistance
    for People with Disabilities in the Workplace</i>, edited by Giuseppe  Di Bucchianico,
    vol. 776, Springer, 2018, pp. 3–14, doi:<a href="https://doi.org/10.1007/978-3-319-94622-1_1">10.1007/978-3-319-94622-1_1</a>.
  short: 'V. Aksu, S. Jenderny, S. Martinez, C. Röcker, in: G. Di Bucchianico (Ed.),
    Providing Context-Sensitive Mobile Assistance for People with Disabilities in
    the Workplace, Springer, Cham, 2018, pp. 3–14.'
  ufg: '<b>Aksu, Volkan et. al. (2018)</b>: Providing Context-Sensitive Mobile Assistance
    for People with Disabilities in the Workplace, in: Giuseppe  Di Bucchianico (Hg.):
    <i>Providing Context-Sensitive Mobile Assistance for People with Disabilities
    in the Workplace</i> (=<i>Advances in Intelligent Systems and Computing 776</i>),
    Cham, S. 3–14.'
  van: 'Aksu V, Jenderny S, Martinez S, Röcker C. Providing Context-Sensitive Mobile
    Assistance for People with Disabilities in the Workplace. In: Di Bucchianico G,
    editor. Providing Context-Sensitive Mobile Assistance for People with Disabilities
    in the Workplace. Cham: Springer; 2018. p. 3–14. (Advances in Intelligent Systems
    and Computing; vol. 776).'
conference:
  end_date: 2018-07-25
  location: Orlando, Florida, USA
  name: 2018 International Conference on Advanced Production Management and Process
    Control ; AHFE 2018
  start_date: 201-07-21
date_created: 2021-01-08T08:26:22Z
date_updated: 2023-03-15T13:49:52Z
department:
- _id: DEP5023
doi: 10.1007/978-3-319-94622-1_1
editor:
- first_name: 'Giuseppe '
  full_name: 'Di Bucchianico, Giuseppe '
  last_name: Di Bucchianico
intvolume: '       776'
keyword:
- Assistive technology
- 'People with disabilities : Human computer interaction : Industry 4.0'
- Inclusion
- Context-sensitive assistance
- Step-by-step instructions
- Production
- Mobile assistance
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 3-14
place: Cham
publication: Providing Context-Sensitive Mobile Assistance for People with Disabilities
  in the Workplace
publication_identifier:
  eisbn:
  - 978-3-319-94622-1
  isbn:
  - 978-3-319-94621-4
publication_status: published
publisher: Springer
series_title: Advances in Intelligent Systems and Computing
status: public
title: Providing Context-Sensitive Mobile Assistance for People with Disabilities
  in the Workplace
type: conference
user_id: '15514'
volume: 776
year: 2018
...
---
_id: '12798'
abstract:
- lang: eng
  text: "The digitization of the industry requires smart products and services. Smart
    products are mechatronic products with an increasing amount of software. To get
    high quality smart products to the market quickly, manufacturers need to reshape
    their product lifecycle processes. They need to apply system engineering-based
    methods to enable smooth cross-domain developments with a special focus on the
    software domain. One significant challenge faced by manufacturers is the harmonization
    of product lifecycle management (PLM), which addresses the hardware lifecycle,
    with application lifecycle management (ALM), which addresses the software lifecycle.\r\n\r\nTo
    support manufacturers in this challenging activity, this paper demonstrates a
    proven process for developing use cases and requirements associated with a PLM/ALM
    integration. This process has been elicited during an industrial case study in
    a manufacturing company. This paper explains this process in detail. A generally
    applicable approach for developing the requirements of a PLM/ALM integration is
    extracted by removing the company-specific factors. "
author:
- first_name: Andreas
  full_name: Deuter, Andreas
  id: '62088'
  last_name: Deuter
  orcid: 0000-0002-6529-6215
- first_name: Andreas
  full_name: Otte, Andreas
  id: '51466'
  last_name: Otte
- first_name: Marcel
  full_name: Ebert, Marcel
  last_name: Ebert
- first_name: Frank
  full_name: Possel-Dölken, Frank
  last_name: Possel-Dölken
citation:
  ama: 'Deuter A, Otte A, Ebert M, Possel-Dölken F. <i>Developing the Requirements
    of a PLM/ALM Integration: An Industrial Case Study</i>. Vol 24. (Denkena B, Thoben
    KD, Trachtler A, eds.). Elsevier BV; 2018:107-113. doi:<a href="https://doi.org/10.1016/j.promfg.2018.06.020">10.1016/j.promfg.2018.06.020</a>'
  apa: 'Deuter, A., Otte, A., Ebert, M., &#38; Possel-Dölken, F. (2018). Developing
    the Requirements of a PLM/ALM Integration: An Industrial Case Study. In B. Denkena,
    K. D. Thoben, &#38; A. Trachtler (Eds.), <i>4th International Conference on System-Integrated
    Intelligence - Intelligent, Flexible and Connected Systems in Products and Production</i>
    (Vol. 24, pp. 107–113). Elsevier BV. <a href="https://doi.org/10.1016/j.promfg.2018.06.020">https://doi.org/10.1016/j.promfg.2018.06.020</a>'
  bjps: '<b>Deuter A <i>et al.</i></b> (2018) <i>Developing the Requirements of a
    PLM/ALM Integration: An Industrial Case Study</i>, Denkena B, Thoben KD and Trachtler
    A (eds). Amsterdam [u.a.]: Elsevier BV.'
  chicago: 'Deuter, Andreas, Andreas Otte, Marcel Ebert, and Frank Possel-Dölken.
    <i>Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study</i>.
    Edited by B. Denkena, K. D.  Thoben, and A. Trachtler. <i>4th International Conference
    on System-Integrated Intelligence - Intelligent, Flexible and Connected Systems
    in Products and Production</i>. Vol. 24. Procedia Manufacturing. Amsterdam [u.a.]:
    Elsevier BV, 2018. <a href="https://doi.org/10.1016/j.promfg.2018.06.020">https://doi.org/10.1016/j.promfg.2018.06.020</a>.'
  chicago-de: 'Deuter, Andreas, Andreas Otte, Marcel Ebert und Frank Possel-Dölken.
    2018. <i>Developing the Requirements of a PLM/ALM Integration: An Industrial Case
    Study</i>. Hg. von B. Denkena, K. D.  Thoben, und A. Trachtler. <i>4th International
    Conference on System-Integrated Intelligence - Intelligent, Flexible and Connected
    Systems in Products and Production</i>. Bd. 24. Procedia Manufacturing. Amsterdam
    [u.a.]: Elsevier BV. doi:<a href="https://doi.org/10.1016/j.promfg.2018.06.020">10.1016/j.promfg.2018.06.020</a>,
    .'
  din1505-2-1: '<span style="font-variant:small-caps;">Deuter, Andreas</span> ; <span
    style="font-variant:small-caps;">Otte, Andreas</span> ; <span style="font-variant:small-caps;">Ebert,
    Marcel</span> ; <span style="font-variant:small-caps;">Possel-Dölken, Frank</span>
    ; <span style="font-variant:small-caps;">Denkena, B.</span> ; <span style="font-variant:small-caps;">Thoben,
    K. D.</span> ; <span style="font-variant:small-caps;">Trachtler, A.</span> (Hrsg.):
    <i>Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study</i>,
    <i>Procedia Manufacturing</i>. Bd. 24. Amsterdam [u.a.] : Elsevier BV, 2018'
  havard: 'A. Deuter, A. Otte, M. Ebert, F. Possel-Dölken, Developing the Requirements
    of a PLM/ALM Integration: An Industrial Case Study, Elsevier BV, Amsterdam [u.a.],
    2018.'
  ieee: 'A. Deuter, A. Otte, M. Ebert, and F. Possel-Dölken, <i>Developing the Requirements
    of a PLM/ALM Integration: An Industrial Case Study</i>, vol. 24. Amsterdam [u.a.]:
    Elsevier BV, 2018, pp. 107–113. doi: <a href="https://doi.org/10.1016/j.promfg.2018.06.020">10.1016/j.promfg.2018.06.020</a>.'
  mla: 'Deuter, Andreas, et al. “Developing the Requirements of a PLM/ALM Integration:
    An Industrial Case Study.” <i>4th International Conference on System-Integrated
    Intelligence - Intelligent, Flexible and Connected Systems in Products and Production</i>,
    edited by B. Denkena et al., vol. 24, Elsevier BV, 2018, pp. 107–13, <a href="https://doi.org/10.1016/j.promfg.2018.06.020">https://doi.org/10.1016/j.promfg.2018.06.020</a>.'
  short: 'A. Deuter, A. Otte, M. Ebert, F. Possel-Dölken, Developing the Requirements
    of a PLM/ALM Integration: An Industrial Case Study, Elsevier BV, Amsterdam [u.a.],
    2018.'
  ufg: '<b>Deuter, Andreas u. a.</b>: Developing the Requirements of a PLM/ALM Integration:
    An Industrial Case Study, Bd. 24, hg. von Denkena, B./Thoben, K.D./Trachtler,
    A., Amsterdam [u.a.] 2018 (Procedia Manufacturing).'
  van: 'Deuter A, Otte A, Ebert M, Possel-Dölken F. Developing the Requirements of
    a PLM/ALM Integration: An Industrial Case Study. Denkena B, Thoben KD, Trachtler
    A, editors. 4th International Conference on System-Integrated Intelligence - Intelligent,
    Flexible and Connected Systems in Products and Production. Amsterdam [u.a.]: Elsevier
    BV; 2018. (Procedia Manufacturing; vol. 24).'
conference:
  end_date: 20218-06-20
  location: Hannover
  name: 4th International Conference on System-Integrated Intelligence - Intelligent,
    Flexible and Connected Systems in Products and Production
  start_date: 2018-06-19
date_created: 2025-04-15T12:50:25Z
date_updated: 2025-06-26T13:39:42Z
department:
- _id: DEP7022
- _id: DEP1306
doi: 10.1016/j.promfg.2018.06.020
editor:
- first_name: B.
  full_name: Denkena, B.
  last_name: Denkena
- first_name: 'K. D. '
  full_name: 'Thoben, K. D. '
  last_name: Thoben
- first_name: A.
  full_name: Trachtler, A.
  last_name: Trachtler
intvolume: '        24'
keyword:
- Product lifecycle management
- Application Lifecycle Management
- Smart products
- Systems engineering
language:
- iso: eng
page: 107-113
place: Amsterdam [u.a.]
publication: 4th International Conference on System-Integrated Intelligence - Intelligent,
  Flexible and Connected Systems in Products and Production
publication_identifier:
  issn:
  - 2351-9789
publication_status: published
publisher: Elsevier BV
series_title: Procedia Manufacturing
status: public
title: 'Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study'
type: conference_editor_article
user_id: '83781'
volume: 24
year: '2018'
...
---
_id: '5932'
abstract:
- lang: eng
  text: Groupage transports are frequently calculated based on freight rates assuming
    a declining rate with respect to volume and to transportation distance. This paper
    investigates the case of feeding many small shipments to customers via a freight
    forwarder network. It is argued that costs for post-carriage transport dominate
    other costs. Based on a theoretical estimate, simulation experiments for the case
    of a uniform distribution of customer locations around the subsidiary with a fixed
    shipment size per drop suggest that the aggregate costs grow progressively with
    increasing customer drop distances from the subsidiary. The resulting implications
    for transport modelling are discussed.
author:
- first_name: Nicholas
  full_name: Boone, Nicholas
  id: '24251'
  last_name: Boone
- first_name: Tim
  full_name: Quisbrock, Tim
  id: '24033'
  last_name: Quisbrock
citation:
  ama: 'Boone N, Quisbrock T. Modelling post-carriage transport costs in groupage
    networks. In: <i>Advanced Manufacturing and Sustainable Logistics : Proceedings
    / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn</i>. Berlin:
    Springer; 2011:332-344. doi:<a href="https://doi.org/doi.org/10.1007/978-3-642-12494-5_30">doi.org/10.1007/978-3-642-12494-5_30</a>'
  apa: 'Boone, N., &#38; Quisbrock, T. (2011). Modelling post-carriage transport costs
    in groupage networks. In <i>Advanced manufacturing and sustainable logistics :
    proceedings / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn</i>
    (pp. 332–344). Berlin: Springer. <a href="https://doi.org/doi.org/10.1007/978-3-642-12494-5_30">https://doi.org/doi.org/10.1007/978-3-642-12494-5_30</a>'
  bjps: '<b>Boone N and Quisbrock T</b> (2011) Modelling Post-Carriage Transport Costs
    in Groupage Networks. <i>Advanced Manufacturing and Sustainable Logistics : Proceedings
    / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn</i>. Berlin:
    Springer, pp. 332–344.'
  chicago: 'Boone, Nicholas, and Tim Quisbrock. “Modelling Post-Carriage Transport
    Costs in Groupage Networks.” In <i>Advanced Manufacturing and Sustainable Logistics :
    Proceedings / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn</i>,
    332–44. Berlin: Springer, 2011. <a href="https://doi.org/doi.org/10.1007/978-3-642-12494-5_30">https://doi.org/doi.org/10.1007/978-3-642-12494-5_30</a>.'
  chicago-de: 'Boone, Nicholas und Tim Quisbrock. 2011. Modelling post-carriage transport
    costs in groupage networks. In: <i>Advanced manufacturing and sustainable logistics :
    proceedings / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn</i>,
    332–344. Berlin: Springer. doi:<a href="https://doi.org/doi.org/10.1007/978-3-642-12494-5_30,">doi.org/10.1007/978-3-642-12494-5_30,</a>
    .'
  din1505-2-1: '<span style="font-variant:small-caps;">Boone, Nicholas</span> ; <span
    style="font-variant:small-caps;">Quisbrock, Tim</span>: Modelling post-carriage
    transport costs in groupage networks. In: <i>Advanced manufacturing and sustainable
    logistics : proceedings / 8th International Heinz Nixdorf Symposium, IHNS 2010,
    Paderborn</i>. Berlin : Springer, 2011, S. 332–344'
  havard: 'N. Boone, T. Quisbrock, Modelling post-carriage transport costs in groupage
    networks, in: Advanced Manufacturing and Sustainable Logistics : Proceedings /
    8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn, Springer, Berlin,
    2011: pp. 332–344.'
  ieee: 'N. Boone and T. Quisbrock, “Modelling post-carriage transport costs in groupage
    networks,” in <i>Advanced manufacturing and sustainable logistics : proceedings
    / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn</i>, Berlin:
    Springer, 2011, pp. 332–344.'
  mla: 'Boone, Nicholas, and Tim Quisbrock. “Modelling Post-Carriage Transport Costs
    in Groupage Networks.” <i>Advanced Manufacturing and Sustainable Logistics : Proceedings
    / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn</i>, Springer,
    2011, pp. 332–44, doi:<a href="https://doi.org/doi.org/10.1007/978-3-642-12494-5_30">doi.org/10.1007/978-3-642-12494-5_30</a>.'
  short: 'N. Boone, T. Quisbrock, in: Advanced Manufacturing and Sustainable Logistics :
    Proceedings / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn,
    Springer, Berlin, 2011, pp. 332–344.'
  ufg: '<b>Boone, Nicholas/Quisbrock, Tim (2011)</b>: Modelling post-carriage transport
    costs in groupage networks, in: <i>Advanced manufacturing and sustainable logistics :
    proceedings / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn</i>,
    Berlin, S. 332–344.'
  van: 'Boone N, Quisbrock T. Modelling post-carriage transport costs in groupage
    networks. In: Advanced manufacturing and sustainable logistics : proceedings /
    8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn. Berlin: Springer;
    2011. p. 332–44.'
conference:
  end_date: 2010-04-22
  location: Paderborn
  name: 8th International Heinz Nixdorf Symposium, IHNS 2010
  start_date: 2010-04-21
date_created: 2021-05-19T07:26:49Z
date_updated: 2023-03-15T13:50:03Z
department:
- _id: DEP1520
doi: doi.org/10.1007/978-3-642-12494-5_30
keyword:
- cost-by-cause principle
- freight forwarder
- freight rates
- network
- overhead costs
- pricing
- simulation
- transport
language:
- iso: eng
page: 332-344
place: Berlin
publication: 'Advanced manufacturing and sustainable logistics : proceedings / 8th
  International Heinz Nixdorf Symposium, IHNS 2010, Paderborn'
publication_identifier:
  eisbn:
  - 978-3-642-12494-5
  isbn:
  - 978-3-642-12461-7
publication_status: published
publisher: Springer
status: public
title: Modelling post-carriage transport costs in groupage networks
type: book_chapter
user_id: '15514'
year: 2011
...