@misc{13701,
  abstract     = {{In times of crisis and conflict, the importance of sustainable and efficiently producible emergency shelters, which enable a life in safety and dignity, in-creases. The construction of such accommodation must meet the require-ments of various areas, including minimum standards of humanitarian organ-ization, structural requirements and manufacturing restrictions. The shelter solution presented here, which results from these requirements, is intended to be a sustainable alternative to existing emergency accommodation, especially tents. In order to actually replace tents in some scenarios, the accommoda-tion must be able to be manufactured industrially in large series. Various concept studies were carried out for this purpose. The principle was: “form follows function & follows production”}},
  author       = {{Riegel, Adrian}},
  booktitle    = {{Advances in Wood Machining : Selected Chapters from the 26th International Wood Machining Seminar (IWMS26)}},
  editor       = {{Goli, Giacomo and Sandak, Jakub and Schajer, Gary and Zanetti, Michaela and Bounamici, Francesco}},
  isbn         = {{978-3-032-17308-9}},
  keywords     = {{Refugee Shelter, Emergency accommodation, sustainability, serial produc-tion, timber frame construction}},
  location     = {{Florenz}},
  pages        = {{186--192}},
  publisher    = {{Springer Verlag GmbH}},
  title        = {{{High volume semi automatized on-site production of sustainable refugee shelters}}},
  volume       = {{26}},
  year         = {{2026}},
}

@misc{14036,
  abstract     = {{This paper presents a robotic system developed to enhance automation in construction workflows through advanced AI
and computer vision technologies. The system integrates a robotic arm with a 3D point cloud camera and state-
of-the-art 2D pre-trained Deep Learning models, such as GroundingDINO and SegmentAnything, to detect and segment construction elements in 3D dynamic, unstructured environments. By processing point cloud data from the camera and aligning it with real-world coordinates, the system achieves precise object localization, enabling tasks such as
element handling and assembly. Designed to address challenges like clutter, occlusion, and variability in construction
sites, this system bridges the gap between controlled laboratory conditions and real-world applications. Experimental
evaluations highlight its potential to improve efficiency and adaptability in construction tasks.}},
  author       = {{Aykin, Yusuf and Sachs, Hans and Gerzen, Nikolai}},
  booktitle    = {{Proceedings of the 42th International Symposium on Automation and Robotics in Construction : Montreal, Canada, July 28-31, 2025}},
  editor       = {{Zhang, Jiansong and Chen, Qian and Lee, Gaang and Gonzalez, Vicente A. and Kamat, Vineet}},
  issn         = {{2413-5844}},
  keywords     = {{Computer Vision, Architecture, Building Construction, Robotics in Construction}},
  location     = {{Montreal, Canada}},
  publisher    = {{International Association for Automation and Robotics in Construction (IAARC)}},
  title        = {{{Enhancing Robotic Vision through Deep Learning Techniques: From Detection to Construction}}},
  doi          = {{10.22260/isarc2025/0026}},
  year         = {{2025}},
}

@inbook{14037,
  abstract     = {{The pressing environmental challenges place significant constraints on resources, triggering the search for efficiency and performance characteristics in sustainable solutions. Mycelium-based composites (MBC) as biodegradable products and their diverse applications have the potential to replace conventional materials. Despite MBCs advantages, they remain not fully exploited in the construction sector due to their limited structural cap abilities. This research focuses on improving the structural performance of MBC by ing Mycelium and Natural Fiber-Reinforced Polymer (NFRP) as a material-efficient hybrid system. For reinforcement, a 2D wicker-lattice system is designed through custom robotic additive manufacturing processes guiding mycelium’s growth, improving its mechanical behavior, and eliminating the need for special formwork. A computationally optimized flow is used to inform material distribution, achieving efficient geometrical and structural formance. A slab panel is realized, showcasing the potential of this hybrid building system and expanding the use of bio-based composite materials in modular architecture applications.}},
  author       = {{Abdelhady, Omar and Schulz, Jens-Uwe and Sachs, Hans and Sardenberg, V.}},
  booktitle    = {{Structures and Architecture - REstructure REmaterialize REthink REuse}},
  editor       = {{Rinke, Mario and Hveijsel, Marie Frier}},
  isbn         = {{978-1-041-11139-9 }},
  keywords     = {{Robotic Architecture, Construction, Wickering, Natural Fibers}},
  location     = {{Antwerp, Belgium}},
  pages        = {{361--368}},
  publisher    = {{CRC Press}},
  title        = {{{Robotic wickering: Fiber-mycelium hybrid modular system}}},
  doi          = {{10.1201/9781003658641-44}},
  year         = {{2025}},
}

@misc{12389,
  abstract     = {{Ressourcenverbrauch, CO2-Fußabdruck und Abfallaufkommen sind zentrale Themen bei der nachhaltigen Entwicklung der Bauwirtschaft. Besonders mit einem Gebäudeabbruch geht ein enormer Ressourcen- und Energieverlust einher. Diese Arbeit fokussiert den Abbruchprozess am Beispiel einer öffentlichen Verwaltung und analysiert die Möglichkeiten dieser, Kreisläufe von Bauteilen und -materialien in der lokalen Bauwirtschaft zu fördern. 
Zunächst wurde der IST-Prozess für einen Abbruch von Gebäuden am Beispiel des Kreis Lippe aufgenommen und Schwachstellen für die Wiedereinbringung von Bauteilen und -materialien identifiziert. Danach wurden Best Practice Ansätze von öffentlichen Verwaltungen in Deutschland recherchiert und anschließend dies um den europäischen Raum erweitert. Der letzte Teil der Analyse bezieht sich auf das RE-BUILD-OWL Projekt, mit welchem der Kreis Lippe plante eine Vorreiterrolle in zirkulärem Bauen einzunehmen, und wie die Projektergebnisse die Wiedereinbringung von Bauteilen und -materialien im Rückbauprozess positiv beeinflussen können. 
Es hat sich gezeigt, dass sich die Best Practice und die Projektergebnisse positiv auf die Schwachstellen des Abbruchprozesses auswirken können. Konkret wurden für den Kreis Lippe vier Handlungsempfehlungen formuliert. 1. Wissensaufbau: Zwar wurde deutlich, dass bei Einzelpersonen großes Fachwissen beseht, ein Austausch zwischen den Mitarbeitenden bestand jedoch nicht ausreichend. Außerdem besteht auch Bedarf an externen Schulungen geschult/ Sensibilisierung. 2. Digitalisierungsstrategie: Langfristig deutet sich im Bausektor ein Wandel zur Nutzung von Building Information Modeling ab. Es wird empfohlen, diesen Wandel im Kreis Lippe vorzubereiten, um die Mitarbeitenden in dem Wandel mitzunehmen und diese Veränderung proaktiv anzugehen. 3. Aktive lokale Marktgestaltung: Der lokale Markt lässt sich durch die Erhöhung der Nachfrage von verfügbaren Sekundärmaterialien und der Erhöhung des Angebotes von verfügbaren Sekundärmaterialien beeinflussen. Wenn zusätzlich innovative Technologien in der Region gefördert werden, lassen sich langfristig Materialkreisläufe entwickeln. 4. Baustoff- und Materialdistribution: Diese Handlungsempfehlung gilt als Teil der Erhöhung des Sekundärmaterialangebots. Um die Angebotserhöhung der Sekundärbauteile und -materialien zu bewerkstelligen, wurden zwei Optionen vorgeschlagen. Zum einen kann die Fremdleistung der Identifizierung und Distribution eingekauft werden, zum anderen ist eine interne Umsetzung mit Aufbau einer Bauteil- und Materialbörse möglich. Wichtig ist in beiden Schritten, dass vor einem Abbruch ein Audit des Gebäudes und eine Klassifizierung der Bauteile und -materialien auf Wiederverwendbarkeit durchgeführt wird. Eine mögliche Umsetzung der Veränderungen wurden in einer beispielhaften SOLL-Prozess-Darstellung skizziert. 
Die Ergebnisse dieser Arbeit zeigen das Potenzial sowie konkrete Schritte auf, die der Kreis Lippe hat, um Bauteile und -materialien in einem Kreislauf zu behalten. Die Best Practice Analyse ist nicht spezifisch für den Kreis Lippe durchgeführt worden, weshalb die Ergebnisse zusätzlich für einen allgemein übertragbaren Erkenntnisgewinn zur Verfügung stehen. Auch andere öffentliche Verwaltungen können anhand der Ergebnisse dieser Arbeit Handlungsschritte ableiten. }},
  author       = {{Steinkuhl, Anika}},
  keywords     = {{Zirkuläres Bauen, Kreislaufwirtschaft, Bauwirtschaft, Nachhaltiges Bauen, Materialkreisläufe, BIM, Building Information Modeling, construction industry, circular economy, sustainability, sustainable construction, circular construction, material cycles}},
  pages        = {{80}},
  publisher    = {{Hochschule Bielefeld}},
  title        = {{{Entwicklung strategischer Handlungsempfehlungen für die Förderung der Kreislaufwirtschaft beim Rückbau öffentlicher Gebäude}}},
  doi          = {{10.25644/rs7s-yc91}},
  year         = {{2024}},
}

@inbook{13169,
  abstract     = {{KI.BAU is a project being developed and conducted at the Detmold School of Design, part of the University of Applied Sciences and Arts Ostwestfalen-Lippe. It focuses on researching the application of artificial intelligence (AI) in architectural design, modelling, production and management processes, particularly on the communication between users, processes and the building itself in various development and life-time phases. Hence the research aims to develop new tools and AI-supported process chains for the design, production and communication of architecture. This includes the training and implementing prototypical machine learning algorithms to autonomously evolve and optimize field-specific processes and workflows.
As mentioned above, a critical question KI.BAU explores is how we, as planners, builders and users, will communicate with architecture in the future, in its phases of creation and use but also beyond. This also involves, besides virtual interfaces, examining the physical interaction with a building, its behaviour, responsiveness and adaptation to certain conditions. 
The primary goal of the research at KI.BAU is to transform architecture into an intelligent, to some degree self-sustaining, self-reflective and maybe even evolving ‘ecological system’. This system should be comprehensively linked with its creators, users, devices, computers, its (biological) environment and networks. Consequently, a building must be viewed as an organism that communicates, interacts and adapts to other connected or related organisms and entities.
}},
  author       = {{Sachs, Hans}},
  booktitle    = {{Synthetic realities: New Frontiers in AI-driven Design, Fabrication and Materiality}},
  editor       = {{Kretzer, Manuel}},
  isbn         = {{978-3887781088}},
  keywords     = {{AI, Artificial Intelligence, Architecture, Build Environment, Building Construction, Ecology of Architecture}},
  pages        = {{14}},
  publisher    = {{AADR – Art Architecture Design Research}},
  title        = {{{KI.BAU Artificial Intelligence in Architecture}}},
  year         = {{2024}},
}

@misc{11599,
  abstract     = {{In a search for more sustainable materials, fungi have proven increasingly effective as a new building material. Mycelium composites are part of this discussion and experimentation. This research discusses the construction of a pavilion in a shell shape made of wooden construction elements filled with mycelium-hemp substrate. This paper explores how the fungus can work in symbiosis with other biomaterials, observing its behavior in two growth phases. The first growth phase took place in a temperature and humidity-controlled lab environment. The second phase was about testing the further growth behavior in an outdoor environment with a relatively wide range of temperature and humidity conditions.}},
  author       = {{Sanches Previti, Isabella and Sachs, Hans}},
  booktitle    = {{SIGraDi 2023  Accelerated Landscapes XXVII International Conference of the Ibero-American Society of Digital Graphics}},
  editor       = {{García Amen, Fernando  and Armagno, Armagno, Ángel and Goñi, Ana Laura}},
  keywords     = {{Digital fabrication, Mycelium-based construction, Growing phases, Computational design, Bioconstruction}},
  location     = {{Punta del Este, Maldonado, Uruguay}},
  pages        = {{409--420}},
  publisher    = {{CumInCAD}},
  title        = {{{Mycelion: A wood-mycelium composite-based, experimental pavilion with multiple growth phases}}},
  year         = {{2023}},
}

@misc{13021,
  abstract     = {{Natural ventilation in a building is an effective way to achieve acceptable indoor air quality. Ventilation dilutes contaminants such as bioeffluents generated by occupants, substances emitted from building materials, and the water vapor generated by occupants’ activities. In a building that requires heating and cooling, adequate ventilation is crucial to minimize energy consumption while maintaining healthy indoor air quality. However, measuring the actual magnitude of the natural ventilation rate, including infiltration through the building envelope and airflow through the building openings, is not always feasible. Although international and national standards suggested the required ventilation rates to maintain acceptable indoor air quality in buildings, they did not offer action plans to achieve or evaluate those design ventilation rates in buildings in use. In this study, the occupant-generated carbon dioxide (CO2) tracer gas decay method was applied to estimate the ventilation rates in an office room in Seoul, South Korea, from summer to winter. Using the method, real-time ventilation rates can be calculated by monitoring indoor and outdoor CO2 concentrations without injecting a tracer gas. For natural ventilation in the test room, 145 mm-diameter circular openings on the fixed glass were used. As a result, first, the indoor CO2 concentrations were used as an indicator to evaluate how much the indoor air quality deteriorated when all the windows were closed in an occupied office room compared to the international standards for indoor air quality. Moreover, we found out that the estimated ventilation rates varied depending on various environmental conditions, even with the same openings for natural ventilation. Considering the indoor and outdoor temperature differences and outdoor wind speeds as the main factors influencing the ventilation rates, we analyzed how they affected the ventilation rates in the different seasons of South Korea. When the wind speeds were calm, less than 2 m/s, the temperature difference played as a factor that influenced the estimated ventilation rates. On the other hand, when the temperature differences were low, less than 3 °C, the wind speed was the primary factor. This study raises awareness about the risk of poor indoor air quality in office rooms that could lead to health problems or unpleasant working environments. This study presents an example of estimating the ventilation rates in an existing building. By using the presented method, the ventilation rate in an existing building can be simply estimated while using the building as usual, and appropriate ventilation strategies for the building can be determined to maintain the desired indoor air quality.}},
  author       = {{Seol, Hyeonji and Arztmann, Daniel and Kim, Naree and Balderrama, Alvaro}},
  booktitle    = {{Sustainability}},
  issn         = {{2071-1050}},
  keywords     = {{Management, Monitoring, Policy and Law, Renewable Energy, Sustainability and the Environment, Geography, Planning and Development, Building and Construction}},
  number       = {{13}},
  publisher    = {{MDPI}},
  title        = {{{Estimation of Natural Ventilation Rates in an Office Room with 145 mm-Diameter Circular Openings Using the Occupant-Generated Tracer-Gas Method}}},
  doi          = {{10.3390/su15139892}},
  volume       = {{15}},
  year         = {{2023}},
}

@misc{13372,
  abstract     = {{This bachelor thesis explores the adaptive reuse of the former Telekom high-rise at Kesselbrink in Bielefeld, a vacant modernist office tower awaiting new purpose. The project proposes a mixed-use transformation that reinterprets the building as a “city within the city,” inspired by Le Corbusier’s Unité d’Habitation in Marseille. The existing structure is strategically reduced to its essential load-bearing concrete frame and floor slabs, preserving the structural skeleton while enabling radical spatial reconfiguration.
Prefabricated timber modules are inserted and cantilevered between the reinforced-concrete columns, extending the usable floor area and introducing a warm, contemporary material contrast to the original façade. This intervention not only increases density and flexibility but also redefines the tower’s appearance, giving it a cosmopolitan and forward-looking architectural identity. The ground floor is conceived as an open and publicly accessible urban platform, activating the surrounding plaza and strengthening social interaction. Upper floors are redesigned as affordable and attractive living spaces for young residents, encouraging a diverse and vibrant community within the building.
A newly designed park-like rooftop landscape provides recreational space and panoramic views over the city, enhancing environmental quality and urban connectivity. By combining structural preservation, modular timber construction, public programming, and residential reuse, the proposal demonstrates how high-rise retrofitting can generate social, ecological, and economic value simultaneously. The project positions adaptive reuse as a viable strategy for sustainable urban regeneration and architectural longevity.}},
  author       = {{Konschake, Leon}},
  keywords     = {{Adaptive Reuse, Mixed-Use Development, High-Rise Transformation, City within the City, Modular Timber Construction, Prefabrication, Structural Preservation, Concrete Skeleton, Cantilevered Modules, Urban Regeneration, Public Ground Floor, Youth Housing, Rooftop Landscape, Sustainability, Social Impact, Ecological Design, Economic Viability, Cosmopolitan Architecture}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{TreeTower}}},
  year         = {{2020}},
}

@inproceedings{457,
  abstract     = {{Additive Manufacturing (AM) increasingly enables the realization of structures, which have a much greater freedom of design und can therefore better  use  nature  as  a  design  ideal.  Bionic  design  principles  have  already been introduced  into  general  design  approaches,  and  several topology optimization systems (TO) are available today to increase structural stiffness and  to  enable  lightweight  design.  AM  and  TO,  used  in  synergy,  promise completely  new  application areas. However,  staircase effects resulting from a  layer-by-layer  build  process  and  unavoidable  support  structures  which must be mechanically removed afterwards are disadvantageous with respect to surface texture and strength properties.
The present article addresses the question  of how far the notches resulting from the staircase effect of Additive Manufacturing and the support structures  removed  decrease  the  strength  of  components.  Most  engineers try  to follow the inner flow of forces in a part’s design by smoothening surfaces in notched areas. Considering  this,  a  elected component  is investigated  with  finite  element  analysis  (FEA)  with  special  regard  for  the concentration  of  tress arising from surface notch effects. An outlook is given as regards how a reduction of the notch effect from the taircase effect can be achieved effectively.}},
  author       = {{Scheideler, Eva and Villmer, Franz-Josef and Adam, G. and Timmer, Mirco}},
  booktitle    = {{Production Engineering and Management Proceedings 6th International Conference}},
  editor       = {{Villmer, Franz-Josef and Padoano, Elio}},
  isbn         = {{978-3-946856-00-9}},
  keywords     = {{Additive  Manufacturing, Topology optimization, Staircase effect, Support structures, Stress concentration, Lightweight construction, Design rules, Notch effect}},
  location     = {{Lemgo}},
  number       = {{1}},
  pages        = {{39--50}},
  title        = {{{Topology Optimization and Additive Manufacturing – A Perfect Symbiosis?}}},
  year         = {{2016}},
}

