---
_id: '13701'
abstract:
- lang: eng
  text: 'In times of crisis and conflict, the importance of sustainable and efficiently
    producible emergency shelters, which enable a life in safety and dignity, in-creases.
    The construction of such accommodation must meet the require-ments of various
    areas, including minimum standards of humanitarian organ-ization, structural requirements
    and manufacturing restrictions. The shelter solution presented here, which results
    from these requirements, is intended to be a sustainable alternative to existing
    emergency accommodation, especially tents. In order to actually replace tents
    in some scenarios, the accommoda-tion must be able to be manufactured industrially
    in large series. Various concept studies were carried out for this purpose. The
    principle was: “form follows function & follows production”'
author:
- first_name: Adrian
  full_name: Riegel, Adrian
  id: '14647'
  last_name: Riegel
citation:
  ama: Riegel A. <i>High Volume Semi Automatized On-Site Production of Sustainable
    Refugee Shelters</i>. Vol 26. (Goli G, Sandak J, Schajer G, Zanetti M, Bounamici
    F, Springer Nature, eds.). Springer Verlag GmbH; 2026:186-192.
  apa: 'Riegel, A. (2026). High volume semi automatized on-site production of sustainable
    refugee shelters. In G. Goli, J. Sandak, G. Schajer, M. Zanetti, F. Bounamici,
    &#38; Springer Nature (Eds.), <i>Advances in Wood Machining : Selected Chapters
    from the 26th International Wood Machining Seminar (IWMS26)</i> (Vol. 26, pp.
    186–192). Springer Verlag GmbH.'
  bjps: '<b>Riegel A</b> (2026) <i>High Volume Semi Automatized On-Site Production
    of Sustainable Refugee Shelters</i>, Goli G et al. (eds). Heidelberg: Springer
    Verlag GmbH.'
  chicago: 'Riegel, Adrian. <i>High Volume Semi Automatized On-Site Production of
    Sustainable Refugee Shelters</i>. Edited by Giacomo Goli, Jakub Sandak, Gary Schajer,
    Michaela Zanetti, Francesco Bounamici, and Springer Nature. <i>Advances in Wood
    Machining : Selected Chapters from the 26th International Wood Machining Seminar
    (IWMS26)</i>. Vol. 26. Proceeding International Wood Machining Seminar. Heidelberg:
    Springer Verlag GmbH, 2026.'
  chicago-de: 'Riegel, Adrian. 2026. <i>High volume semi automatized on-site production
    of sustainable refugee shelters</i>. Hg. von Giacomo Goli, Jakub Sandak, Gary
    Schajer, Michaela Zanetti, Francesco Bounamici, und Springer Nature. <i>Advances
    in Wood Machining : Selected Chapters from the 26th International Wood Machining
    Seminar (IWMS26)</i>. Bd. 26. Proceeding International Wood Machining Seminar.
    Heidelberg: Springer Verlag GmbH.'
  din1505-2-1: '<span style="font-variant:small-caps;">Riegel, Adrian</span> ; <span
    style="font-variant:small-caps;">Goli, G.</span> ; <span style="font-variant:small-caps;">Sandak,
    J.</span> ; <span style="font-variant:small-caps;">Schajer, G.</span> ; <span
    style="font-variant:small-caps;">Zanetti, M.</span> ; <span style="font-variant:small-caps;">Bounamici,
    F.</span> ; <span style="font-variant:small-caps;">Springer Nature</span> (Hrsg.):
    <i>High volume semi automatized on-site production of sustainable refugee shelters</i>,
    <i>Proceeding International Wood Machining Seminar</i>. Bd. 26. Heidelberg : Springer
    Verlag GmbH, 2026'
  havard: A. Riegel, High volume semi automatized on-site production of sustainable
    refugee shelters, Springer Verlag GmbH, Heidelberg, 2026.
  ieee: 'A. Riegel, <i>High volume semi automatized on-site production of sustainable
    refugee shelters</i>, vol. 26. Heidelberg: Springer Verlag GmbH, 2026, pp. 186–192.'
  mla: 'Riegel, Adrian. “High Volume Semi Automatized On-Site Production of Sustainable
    Refugee Shelters.” <i>Advances in Wood Machining : Selected Chapters from the
    26th International Wood Machining Seminar (IWMS26)</i>, edited by Giacomo Goli
    et al., vol. 26, Springer Verlag GmbH, 2026, pp. 186–92.'
  short: A. Riegel, High Volume Semi Automatized On-Site Production of Sustainable
    Refugee Shelters, Springer Verlag GmbH, Heidelberg, 2026.
  ufg: '<b>Riegel, Adrian</b>: High volume semi automatized on-site production of
    sustainable refugee shelters, Bd. 26, hg. von Goli, Giacomo u. a., Heidelberg
    2026 (Proceeding International Wood Machining Seminar).'
  van: 'Riegel A. High volume semi automatized on-site production of sustainable refugee
    shelters. Goli G, Sandak J, Schajer G, Zanetti M, Bounamici F, Springer Nature,
    editors. Advances in Wood Machining : Selected Chapters from the 26th International
    Wood Machining Seminar (IWMS26). Heidelberg: Springer Verlag GmbH; 2026. (Proceeding
    International Wood Machining Seminar; vol. 26).'
conference:
  end_date: 2025-04-15
  location: Florenz
  name: 26th International Wood Machining Seminar (IWMS26)
  start_date: 2025-04-14
corporate_editor:
- Springer Nature
date_created: 2026-04-22T10:15:04Z
date_updated: 2026-04-23T06:55:51Z
ddc:
- '670'
department:
- _id: DEP7019
editor:
- first_name: Giacomo
  full_name: Goli, Giacomo
  last_name: Goli
- first_name: Jakub
  full_name: Sandak, Jakub
  last_name: Sandak
- first_name: Gary
  full_name: Schajer, Gary
  last_name: Schajer
- first_name: Michaela
  full_name: Zanetti, Michaela
  last_name: Zanetti
- first_name: Francesco
  full_name: Bounamici, Francesco
  last_name: Bounamici
has_accepted_license: '1'
intvolume: '        26'
jel:
- N63
keyword:
- Refugee Shelter
- Emergency accommodation
- sustainability
- serial produc-tion
- timber frame construction
language:
- iso: eng
main_file_link:
- open_access: '1'
  url: https://www.iufro.org/media/fileadmin/publications/proceedings-archive/50000-50400-50408-iwms26-firenze25-proceedings.pdf
oa: '1'
page: 186-192
place: Heidelberg
publication: 'Advances in Wood Machining : Selected Chapters from the 26th International
  Wood Machining Seminar (IWMS26)'
publication_identifier:
  isbn:
  - 978-3-032-17308-9
publication_status: published
publisher: Springer Verlag GmbH
quality_controlled: '1'
series_title: Proceeding International Wood Machining Seminar
status: public
title: High volume semi automatized on-site production of sustainable refugee shelters
type: conference_editor_article
user_id: '83781'
volume: 26
year: '2026'
...
---
_id: '14036'
abstract:
- lang: eng
  text: "This paper presents a robotic system developed to enhance automation in construction
    workflows through advanced AI\r\nand computer vision technologies. The system
    integrates a robotic arm with a 3D point cloud camera and state-\r\nof-the-art
    2D pre-trained Deep Learning models, such as GroundingDINO and SegmentAnything,
    to detect and segment construction elements in 3D dynamic, unstructured environments.
    By processing point cloud data from the camera and aligning it with real-world
    coordinates, the system achieves precise object localization, enabling tasks such
    as\r\nelement handling and assembly. Designed to address challenges like clutter,
    occlusion, and variability in construction\r\nsites, this system bridges the gap
    between controlled laboratory conditions and real-world applications. Experimental\r\nevaluations
    highlight its potential to improve efficiency and adaptability in construction
    tasks."
author:
- first_name: Yusuf
  full_name: Aykin, Yusuf
  id: '84542'
  last_name: Aykin
- first_name: Hans
  full_name: Sachs, Hans
  id: '64589'
  last_name: Sachs
- first_name: Nikolai
  full_name: Gerzen, Nikolai
  id: '76704'
  last_name: Gerzen
citation:
  ama: 'Aykin Y, Sachs H, Gerzen N. <i>Enhancing Robotic Vision through Deep Learning
    Techniques: From Detection to Construction</i>. (Zhang J, Chen Q, Lee G, et al.,
    eds.). International Association for Automation and Robotics in Construction (IAARC);
    2025. doi:<a href="https://doi.org/10.22260/isarc2025/0026">10.22260/isarc2025/0026</a>'
  apa: 'Aykin, Y., Sachs, H., &#38; Gerzen, N. (2025). Enhancing Robotic Vision through
    Deep Learning Techniques: From Detection to Construction. In J. Zhang, Q. Chen,
    G. Lee, V. A. Gonzalez, V. Kamat, International Association for Automation and
    Robotics in Construction, &#38; nternational Symposium on Automation and Robotics
    in Construction (Eds.), <i>Proceedings of the 42th International Symposium on
    Automation and Robotics in Construction : Montreal, Canada, July 28-31, 2025</i>.
    International Association for Automation and Robotics in Construction (IAARC).
    <a href="https://doi.org/10.22260/isarc2025/0026">https://doi.org/10.22260/isarc2025/0026</a>'
  bjps: '<b>Aykin Y, Sachs H and Gerzen N</b> (2025) <i>Enhancing Robotic Vision through
    Deep Learning Techniques: From Detection to Construction</i>, Zhang J et al. (eds).
    International Association for Automation and Robotics in Construction (IAARC).'
  chicago: 'Aykin, Yusuf, Hans Sachs, and Nikolai Gerzen. <i>Enhancing Robotic Vision
    through Deep Learning Techniques: From Detection to Construction</i>. Edited by
    Jiansong Zhang, Qian Chen, Gaang Lee, Vicente A. Gonzalez, Vineet Kamat, International
    Association for Automation and Robotics in Construction, and nternational Symposium
    on Automation and Robotics in Construction. <i>Proceedings of the 42th International
    Symposium on Automation and Robotics in Construction : Montreal, Canada, July
    28-31, 2025</i>. International Association for Automation and Robotics in Construction
    (IAARC), 2025. <a href="https://doi.org/10.22260/isarc2025/0026">https://doi.org/10.22260/isarc2025/0026</a>.'
  chicago-de: 'Aykin, Yusuf, Hans Sachs und Nikolai Gerzen. 2025. <i>Enhancing Robotic
    Vision through Deep Learning Techniques: From Detection to Construction</i>. Hg.
    von Jiansong Zhang, Qian Chen, Gaang Lee, Vicente A. Gonzalez, Vineet Kamat, International
    Association for Automation and Robotics in Construction, und nternational Symposium
    on Automation and Robotics in Construction. <i>Proceedings of the 42th International
    Symposium on Automation and Robotics in Construction : Montreal, Canada, July
    28-31, 2025</i>. International Association for Automation and Robotics in Construction
    (IAARC). doi:<a href="https://doi.org/10.22260/isarc2025/0026">10.22260/isarc2025/0026</a>,
    .'
  din1505-2-1: '<span style="font-variant:small-caps;">Aykin, Yusuf</span> ; <span
    style="font-variant:small-caps;">Sachs, Hans</span> ; <span style="font-variant:small-caps;">Gerzen,
    Nikolai</span> ; <span style="font-variant:small-caps;">Zhang, J.</span> ; <span
    style="font-variant:small-caps;">Chen, Q.</span> ; <span style="font-variant:small-caps;">Lee,
    G.</span> ; <span style="font-variant:small-caps;">Gonzalez, V. A.</span> ; <span
    style="font-variant:small-caps;">Kamat, V.</span> ; <span style="font-variant:small-caps;">International
    Association for Automation and Robotics in Construction</span> ; <span style="font-variant:small-caps;">nternational
    Symposium on Automation and Robotics in Construction</span> (Hrsg.): <i>Enhancing
    Robotic Vision through Deep Learning Techniques: From Detection to Construction</i> :
    International Association for Automation and Robotics in Construction (IAARC),
    2025'
  havard: 'Y. Aykin, H. Sachs, N. Gerzen, Enhancing Robotic Vision through Deep Learning
    Techniques: From Detection to Construction, International Association for Automation
    and Robotics in Construction (IAARC), 2025.'
  ieee: 'Y. Aykin, H. Sachs, and N. Gerzen, <i>Enhancing Robotic Vision through Deep
    Learning Techniques: From Detection to Construction</i>. International Association
    for Automation and Robotics in Construction (IAARC), 2025. doi: <a href="https://doi.org/10.22260/isarc2025/0026">10.22260/isarc2025/0026</a>.'
  mla: 'Aykin, Yusuf, et al. “Enhancing Robotic Vision through Deep Learning Techniques:
    From Detection to Construction.” <i>Proceedings of the 42th International Symposium
    on Automation and Robotics in Construction : Montreal, Canada, July 28-31, 2025</i>,
    edited by Jiansong Zhang et al., International Association for Automation and
    Robotics in Construction (IAARC), 2025, <a href="https://doi.org/10.22260/isarc2025/0026">https://doi.org/10.22260/isarc2025/0026</a>.'
  short: 'Y. Aykin, H. Sachs, N. Gerzen, Enhancing Robotic Vision through Deep Learning
    Techniques: From Detection to Construction, International Association for Automation
    and Robotics in Construction (IAARC), 2025.'
  ufg: '<b>Aykin, Yusuf/Sachs, Hans/Gerzen, Nikolai</b>: Enhancing Robotic Vision
    through Deep Learning Techniques: From Detection to Construction, hg. von Zhang,
    Jiansong u. a., o. O. 2025.'
  van: 'Aykin Y, Sachs H, Gerzen N. Enhancing Robotic Vision through Deep Learning
    Techniques: From Detection to Construction. Zhang J, Chen Q, Lee G, Gonzalez VA,
    Kamat V, International Association for Automation and Robotics in Construction,
    et al., editors. Proceedings of the 42th International Symposium on Automation
    and Robotics in Construction : Montreal, Canada, July 28-31, 2025. International
    Association for Automation and Robotics in Construction (IAARC); 2025.'
conference:
  end_date: 2025-07-31
  location: Montreal, Canada
  name: '42th International Symposium on Automation and Robotics in Construction '
  start_date: 2025-07-28
corporate_editor:
- International Association for Automation and Robotics in Construction
- nternational Symposium on Automation and Robotics in Construction
date_created: 2026-09-17T14:27:18Z
date_updated: 2026-09-25T13:05:40Z
ddc:
- '600'
department:
- _id: DEP1055
- _id: DEP1624
doi: 10.22260/isarc2025/0026
editor:
- first_name: Jiansong
  full_name: Zhang, Jiansong
  last_name: Zhang
- first_name: Qian
  full_name: Chen, Qian
  last_name: Chen
- first_name: Gaang
  full_name: Lee, Gaang
  last_name: Lee
- first_name: Vicente A.
  full_name: Gonzalez, Vicente A.
  last_name: Gonzalez
- first_name: Vineet
  full_name: Kamat, Vineet
  last_name: Kamat
has_accepted_license: '1'
keyword:
- Computer Vision
- Architecture
- Building Construction
- Robotics in Construction
language:
- iso: eng
publication: 'Proceedings of the 42th International Symposium on Automation and Robotics
  in Construction : Montreal, Canada, July 28-31, 2025'
publication_identifier:
  eisbn:
  - 978-0-6458322-2-8
  eissn:
  - 2413-5844
publication_status: published
publisher: International Association for Automation and Robotics in Construction (IAARC)
quality_controlled: '1'
status: public
title: 'Enhancing Robotic Vision through Deep Learning Techniques: From Detection
  to Construction'
type: conference_editor_article
user_id: '83781'
year: '2025'
...
---
_id: '14037'
abstract:
- lang: eng
  text: The pressing environmental challenges place significant constraints on resources,
    triggering the search for efficiency and performance characteristics in sustainable
    solutions. Mycelium-based composites (MBC) as biodegradable products and their
    diverse applications have the potential to replace conventional materials. Despite
    MBCs advantages, they remain not fully exploited in the construction sector due
    to their limited structural cap abilities. This research focuses on improving
    the structural performance of MBC by ing Mycelium and Natural Fiber-Reinforced
    Polymer (NFRP) as a material-efficient hybrid system. For reinforcement, a 2D
    wicker-lattice system is designed through custom robotic additive manufacturing
    processes guiding mycelium’s growth, improving its mechanical behavior, and eliminating
    the need for special formwork. A computationally optimized flow is used to inform
    material distribution, achieving efficient geometrical and structural formance.
    A slab panel is realized, showcasing the potential of this hybrid building system
    and expanding the use of bio-based composite materials in modular architecture
    applications.
author:
- first_name: Omar
  full_name: Abdelhady, Omar
  id: '84481'
  last_name: Abdelhady
- first_name: Jens-Uwe
  full_name: Schulz, Jens-Uwe
  id: '10022'
  last_name: Schulz
- first_name: Hans
  full_name: Sachs, Hans
  id: '64589'
  last_name: Sachs
- first_name: V.
  full_name: Sardenberg, V.
  last_name: Sardenberg
citation:
  ama: 'Abdelhady O, Schulz JU, Sachs H, Sardenberg V. Robotic wickering: Fiber-mycelium
    hybrid modular system. In: Rinke M, Hveijsel MF, eds. <i>Structures and Architecture
    - REstructure REmaterialize REthink REuse</i>. CRC Press; 2025:361-368. doi:<a
    href="https://doi.org/10.1201/9781003658641-44">10.1201/9781003658641-44</a>'
  apa: 'Abdelhady, O., Schulz, J.-U., Sachs, H., &#38; Sardenberg, V. (2025). Robotic
    wickering: Fiber-mycelium hybrid modular system. In M. Rinke &#38; M. F. Hveijsel
    (Eds.), <i>Structures and Architecture - REstructure REmaterialize REthink REuse</i>
    (pp. 361–368). CRC Press. <a href="https://doi.org/10.1201/9781003658641-44">https://doi.org/10.1201/9781003658641-44</a>'
  bjps: '<b>Abdelhady O <i>et al.</i></b> (2025) Robotic Wickering: Fiber-Mycelium
    Hybrid Modular System. In Rinke M and Hveijsel MF (eds), <i>Structures and Architecture
    - REstructure REmaterialize REthink REuse</i>. London: CRC Press, pp. 361–368.'
  chicago: 'Abdelhady, Omar, Jens-Uwe Schulz, Hans Sachs, and V. Sardenberg. “Robotic
    Wickering: Fiber-Mycelium Hybrid Modular System.” In <i>Structures and Architecture
    - REstructure REmaterialize REthink REuse</i>, edited by Mario Rinke and Marie
    Frier Hveijsel, 361–68. London: CRC Press, 2025. <a href="https://doi.org/10.1201/9781003658641-44">https://doi.org/10.1201/9781003658641-44</a>.'
  chicago-de: 'Abdelhady, Omar, Jens-Uwe Schulz, Hans Sachs und V. Sardenberg. 2025.
    Robotic wickering: Fiber-mycelium hybrid modular system. In: <i>Structures and
    Architecture - REstructure REmaterialize REthink REuse</i>, hg. von Mario Rinke
    und Marie Frier Hveijsel, 361–368. London: CRC Press. doi:<a href="https://doi.org/10.1201/9781003658641-44">10.1201/9781003658641-44</a>,
    .'
  din1505-2-1: '<span style="font-variant:small-caps;">Abdelhady, Omar</span> ; <span
    style="font-variant:small-caps;">Schulz, Jens-Uwe</span> ; <span style="font-variant:small-caps;">Sachs,
    Hans</span> ; <span style="font-variant:small-caps;">Sardenberg, V.</span>: Robotic
    wickering: Fiber-mycelium hybrid modular system. In: <span style="font-variant:small-caps;">Rinke,
    M.</span> ; <span style="font-variant:small-caps;">Hveijsel, M. F.</span> (Hrsg.):
    <i>Structures and Architecture - REstructure REmaterialize REthink REuse</i>.
    London : CRC Press, 2025, S. 361–368'
  havard: 'O. Abdelhady, J.-U. Schulz, H. Sachs, V. Sardenberg, Robotic wickering:
    Fiber-mycelium hybrid modular system, in: M. Rinke, M.F. Hveijsel (Eds.), Structures
    and Architecture - REstructure REmaterialize REthink REuse, CRC Press, London,
    2025: pp. 361–368.'
  ieee: 'O. Abdelhady, J.-U. Schulz, H. Sachs, and V. Sardenberg, “Robotic wickering:
    Fiber-mycelium hybrid modular system,” in <i>Structures and Architecture - REstructure
    REmaterialize REthink REuse</i>, M. Rinke and M. F. Hveijsel, Eds. London: CRC
    Press, 2025, pp. 361–368. doi: <a href="https://doi.org/10.1201/9781003658641-44">10.1201/9781003658641-44</a>.'
  mla: 'Abdelhady, Omar, et al. “Robotic Wickering: Fiber-Mycelium Hybrid Modular
    System.” <i>Structures and Architecture - REstructure REmaterialize REthink REuse</i>,
    edited by Mario Rinke and Marie Frier Hveijsel, CRC Press, 2025, pp. 361–68, <a
    href="https://doi.org/10.1201/9781003658641-44">https://doi.org/10.1201/9781003658641-44</a>.'
  short: 'O. Abdelhady, J.-U. Schulz, H. Sachs, V. Sardenberg, in: M. Rinke, M.F.
    Hveijsel (Eds.), Structures and Architecture - REstructure REmaterialize REthink
    REuse, CRC Press, London, 2025, pp. 361–368.'
  ufg: '<b>Abdelhady, Omar u. a.</b>: Robotic wickering: Fiber-mycelium hybrid modular
    system, in: <i>Rinke, Mario/Hveijsel, Marie Frier (Hgg.)</i>: Structures and Architecture
    - REstructure REmaterialize REthink REuse, London 2025,  S. 361–368.'
  van: 'Abdelhady O, Schulz JU, Sachs H, Sardenberg V. Robotic wickering: Fiber-mycelium
    hybrid modular system. In: Rinke M, Hveijsel MF, editors. Structures and Architecture
    - REstructure REmaterialize REthink REuse. London: CRC Press; 2025. p. 361–8.'
conference:
  end_date: 2025-08-11
  location: Antwerp, Belgium
  name: ICSA 2025, Structures and Architecture. REstructure REmaterialize REthink
    REuse
  start_date: 2025-08-07
date_created: 2026-09-17T14:34:26Z
date_updated: 2026-09-25T13:22:16Z
ddc:
- '600'
department:
- _id: DEP1055
doi: 10.1201/9781003658641-44
editor:
- first_name: Mario
  full_name: Rinke, Mario
  last_name: Rinke
- first_name: Marie Frier
  full_name: Hveijsel, Marie Frier
  last_name: Hveijsel
has_accepted_license: '1'
keyword:
- Robotic Architecture
- Construction
- Wickering
- Natural Fibers
language:
- iso: eng
page: 361-368
place: London
publication: Structures and Architecture - REstructure REmaterialize REthink REuse
publication_identifier:
  eisbn:
  - '9781003658641'
  isbn:
  - '978-1-041-11139-9 '
publication_status: published
publisher: CRC Press
quality_controlled: '1'
status: public
title: 'Robotic wickering: Fiber-mycelium hybrid modular system'
type: book_chapter
user_id: '83781'
year: '2025'
...
---
_id: '12389'
abstract:
- lang: ger
  text: "Ressourcenverbrauch, CO2-Fußabdruck und Abfallaufkommen sind zentrale Themen
    bei der nachhaltigen Entwicklung der Bauwirtschaft. Besonders mit einem Gebäudeabbruch
    geht ein enormer Ressourcen- und Energieverlust einher. Diese Arbeit fokussiert
    den Abbruchprozess am Beispiel einer öffentlichen Verwaltung und analysiert die
    Möglichkeiten dieser, Kreisläufe von Bauteilen und -materialien in der lokalen
    Bauwirtschaft zu fördern. \r\nZunächst wurde der IST-Prozess für einen Abbruch
    von Gebäuden am Beispiel des Kreis Lippe aufgenommen und Schwachstellen für die
    Wiedereinbringung von Bauteilen und -materialien identifiziert. Danach wurden
    Best Practice Ansätze von öffentlichen Verwaltungen in Deutschland recherchiert
    und anschließend dies um den europäischen Raum erweitert. Der letzte Teil der
    Analyse bezieht sich auf das RE-BUILD-OWL Projekt, mit welchem der Kreis Lippe
    plante eine Vorreiterrolle in zirkulärem Bauen einzunehmen, und wie die Projektergebnisse
    die Wiedereinbringung von Bauteilen und -materialien im Rückbauprozess positiv
    beeinflussen können. \r\nEs hat sich gezeigt, dass sich die Best Practice und
    die Projektergebnisse positiv auf die Schwachstellen des Abbruchprozesses auswirken
    können. Konkret wurden für den Kreis Lippe vier Handlungsempfehlungen formuliert.
    1. Wissensaufbau: Zwar wurde deutlich, dass bei Einzelpersonen großes Fachwissen
    beseht, ein Austausch zwischen den Mitarbeitenden bestand jedoch nicht ausreichend.
    Außerdem besteht auch Bedarf an externen Schulungen geschult/ Sensibilisierung.
    2. Digitalisierungsstrategie: Langfristig deutet sich im Bausektor ein Wandel
    zur Nutzung von Building Information Modeling ab. Es wird empfohlen, diesen Wandel
    im Kreis Lippe vorzubereiten, um die Mitarbeitenden in dem Wandel mitzunehmen
    und diese Veränderung proaktiv anzugehen. 3. Aktive lokale Marktgestaltung: Der
    lokale Markt lässt sich durch die Erhöhung der Nachfrage von verfügbaren Sekundärmaterialien
    und der Erhöhung des Angebotes von verfügbaren Sekundärmaterialien beeinflussen.
    Wenn zusätzlich innovative Technologien in der Region gefördert werden, lassen
    sich langfristig Materialkreisläufe entwickeln. 4. Baustoff- und Materialdistribution:
    Diese Handlungsempfehlung gilt als Teil der Erhöhung des Sekundärmaterialangebots.
    Um die Angebotserhöhung der Sekundärbauteile und -materialien zu bewerkstelligen,
    wurden zwei Optionen vorgeschlagen. Zum einen kann die Fremdleistung der Identifizierung
    und Distribution eingekauft werden, zum anderen ist eine interne Umsetzung mit
    Aufbau einer Bauteil- und Materialbörse möglich. Wichtig ist in beiden Schritten,
    dass vor einem Abbruch ein Audit des Gebäudes und eine Klassifizierung der Bauteile
    und -materialien auf Wiederverwendbarkeit durchgeführt wird. Eine mögliche Umsetzung
    der Veränderungen wurden in einer beispielhaften SOLL-Prozess-Darstellung skizziert.
    \r\nDie Ergebnisse dieser Arbeit zeigen das Potenzial sowie konkrete Schritte
    auf, die der Kreis Lippe hat, um Bauteile und -materialien in einem Kreislauf
    zu behalten. Die Best Practice Analyse ist nicht spezifisch für den Kreis Lippe
    durchgeführt worden, weshalb die Ergebnisse zusätzlich für einen allgemein übertragbaren
    Erkenntnisgewinn zur Verfügung stehen. Auch andere öffentliche Verwaltungen können
    anhand der Ergebnisse dieser Arbeit Handlungsschritte ableiten. "
- lang: eng
  text: "Resource consumption, carbon footprint and waste generation are key issues
    in the sustainable development of the construction industry. Demolition of buildings
    in particular is associated with an enormous loss of resources and energy. This
    thesis deals with the role of public administrations, in particular with their
    demolition process, and analyzes the possibilities of these to promote circular
    economy of building components and materials in the local construction industry.\r\nFirst,
    the actual process for demolishing buildings was recorded using the example of
    the Kreis Lippe and weak points for the reuse of components and materials were
    identified. This was followed by research into best practice in public administration
    in Germany and then in Europe. Finally, the last part of the analysis refers to
    RE-BUILD-OWL, a project with which the Kreis Lippe planned to take a pioneering
    role in circular construction, and how the project results can positively influence
    the reuse of components and materials in the deconstruction process.\r\nIt was
    determined that best practice and the project results can have a positive impact
    on the weak points. Specifically, four recommendations for action were formulated
    for the Kreis Lippe.  1. building knowledge: Although it became clear that individuals
    have a great deal of specialist knowledge, there was not enough exchange between
    the employees. In addition, external training should be provided as well. 2. digitalization
    strategy: In the long term, there are signs of a shift towards the use of Building
    Information Modeling in the construction sector. This change should be prepared
    in the Kreis Lippe in order to take employees along with the change and proactively
    tackle this change. 3. active local market design: The local market can be influenced
    by increasing the demand for available secondary materials and by increasing the
    supply of available secondary materials. If innovative technologies are also promoted
    in the region, material cycles can be developed in the long term. 4. construction
    components and material distribution: This recommendation for action is part of
    increasing the supply of secondary materials. There are two options for increasing
    the supply of secondary components and materials. On the one hand, the external
    service of identification and distribution can be purchased; on the other hand,
    internal implementation with the establishment of a component and material exchange
    is possible. In both cases, it is important that an audit of the building and
    a classification of the components and materials for reusability is carried out
    before demolition. A possible implementation of the changes was outlined in an
    exemplary target process diagram.\r\nThe results of this work show the potential
    and concrete steps that the Kreis Lippe has, to keep components and materials
    in a cycle. The best practice analysis was not carried out specifically for the
    Kreis Lippe, which is why the results are also available for a generally transferable
    gain in knowledge. Other public administrations can also derive action steps from
    the results of this work."
author:
- first_name: Anika
  full_name: Steinkuhl, Anika
  id: '87756'
  last_name: Steinkuhl
  orcid: 0009-0008-6759-6394
citation:
  ama: Steinkuhl A. <i>Entwicklung strategischer Handlungsempfehlungen für die Förderung
    der Kreislaufwirtschaft beim Rückbau öffentlicher Gebäude</i>. Hochschule Bielefeld
    doi:<a href="https://doi.org/10.25644/rs7s-yc91">10.25644/rs7s-yc91</a>
  apa: Steinkuhl, A. (n.d.). <i>Entwicklung strategischer Handlungsempfehlungen für
    die Förderung der Kreislaufwirtschaft beim Rückbau öffentlicher Gebäude</i>. Hochschule
    Bielefeld. <a href="https://doi.org/10.25644/rs7s-yc91">https://doi.org/10.25644/rs7s-yc91</a>
  bjps: '<b>Steinkuhl A</b> (n.d.) <i>Entwicklung strategischer Handlungsempfehlungen
    für die Förderung der Kreislaufwirtschaft beim Rückbau öffentlicher Gebäude</i>.
    Bielefeld: Hochschule Bielefeld.'
  chicago: 'Steinkuhl, Anika. <i>Entwicklung strategischer Handlungsempfehlungen für
    die Förderung der Kreislaufwirtschaft beim Rückbau öffentlicher Gebäude</i>. Bielefeld:
    Hochschule Bielefeld, n.d. <a href="https://doi.org/10.25644/rs7s-yc91">https://doi.org/10.25644/rs7s-yc91</a>.'
  chicago-de: 'Steinkuhl, Anika. <i>Entwicklung strategischer Handlungsempfehlungen
    für die Förderung der Kreislaufwirtschaft beim Rückbau öffentlicher Gebäude</i>.
    Bielefeld: Hochschule Bielefeld. doi:<a href="https://doi.org/10.25644/rs7s-yc91">10.25644/rs7s-yc91</a>,
    .'
  din1505-2-1: '<span style="font-variant:small-caps;">Steinkuhl, Anika</span>: <i>Entwicklung
    strategischer Handlungsempfehlungen für die Förderung der Kreislaufwirtschaft
    beim Rückbau öffentlicher Gebäude</i>. Bielefeld : Hochschule Bielefeld'
  havard: A. Steinkuhl, Entwicklung strategischer Handlungsempfehlungen für die Förderung
    der Kreislaufwirtschaft beim Rückbau öffentlicher Gebäude, Hochschule Bielefeld,
    Bielefeld, n.d.
  ieee: 'A. Steinkuhl, <i>Entwicklung strategischer Handlungsempfehlungen für die
    Förderung der Kreislaufwirtschaft beim Rückbau öffentlicher Gebäude</i>. Bielefeld:
    Hochschule Bielefeld. doi: <a href="https://doi.org/10.25644/rs7s-yc91">10.25644/rs7s-yc91</a>.'
  mla: Steinkuhl, Anika. <i>Entwicklung strategischer Handlungsempfehlungen für die
    Förderung der Kreislaufwirtschaft beim Rückbau öffentlicher Gebäude</i>. Hochschule
    Bielefeld, <a href="https://doi.org/10.25644/rs7s-yc91">https://doi.org/10.25644/rs7s-yc91</a>.
  short: A. Steinkuhl, Entwicklung strategischer Handlungsempfehlungen für die Förderung
    der Kreislaufwirtschaft beim Rückbau öffentlicher Gebäude, Hochschule Bielefeld,
    Bielefeld, n.d.
  ufg: '<b>Steinkuhl, Anika</b>: Entwicklung strategischer Handlungsempfehlungen für
    die Förderung der Kreislaufwirtschaft beim Rückbau öffentlicher Gebäude, Bielefeld
    o. J.'
  van: 'Steinkuhl A. Entwicklung strategischer Handlungsempfehlungen für die Förderung
    der Kreislaufwirtschaft beim Rückbau öffentlicher Gebäude. Bielefeld: Hochschule
    Bielefeld; 80 p.'
date_created: 2025-01-23T15:21:53Z
date_updated: 2025-12-08T14:06:15Z
ddc:
- '000'
department:
- _id: DEP1622
doi: 10.25644/rs7s-yc91
extern: '1'
file:
- access_level: open_access
  content_type: application/pdf
  creator: ebs-9xz
  date_created: 2025-12-08T13:29:50Z
  date_updated: 2025-12-08T13:29:50Z
  file_id: '13317'
  file_name: Steinkuhl_Entwicklung strategischer Handlungsempfehlungen für die Förderung
    der Kreislaufwirtschaft beim Rückbau öffentlicher Gebäude.pdf
  file_size: 2396087
  relation: main_file
  success: 1
file_date_updated: 2025-12-08T13:29:50Z
has_accepted_license: '1'
keyword:
- Zirkuläres Bauen
- Kreislaufwirtschaft
- Bauwirtschaft
- Nachhaltiges Bauen
- Materialkreisläufe
- BIM
- Building Information Modeling
- construction industry
- circular economy
- sustainability
- sustainable construction
- circular construction
- material cycles
language:
- iso: ger
oa: '1'
page: '80'
place: Bielefeld
publication_status: accepted
publisher: Hochschule Bielefeld
status: public
supervisor:
- first_name: Hans
  full_name: Brandt-Pook, Hans
  last_name: Brandt-Pook
- first_name: Peter
  full_name: Hartel, Peter
  last_name: Hartel
- first_name: Birgit
  full_name: Essling, Birgit
  last_name: Essling
- first_name: Lisa
  full_name: Pusch, Lisa
  id: '85026'
  last_name: Pusch
  orcid: https://orcid.org/0000-0002-9756-9548
title: Entwicklung strategischer Handlungsempfehlungen für die Förderung der Kreislaufwirtschaft
  beim Rückbau öffentlicher Gebäude
type: master_thesis
user_id: '83781'
year: '2024'
...
---
_id: '13169'
abstract:
- lang: eng
  text: "KI.BAU is a project being developed and conducted at the Detmold School of
    Design, part of the University of Applied Sciences and Arts Ostwestfalen-Lippe.
    It focuses on researching the application of artificial intelligence (AI) in architectural
    design, modelling, production and management processes, particularly on the communication
    between users, processes and the building itself in various development and life-time
    phases. Hence the research aims to develop new tools and AI-supported process
    chains for the design, production and communication of architecture. This includes
    the training and implementing prototypical machine learning algorithms to autonomously
    evolve and optimize field-specific processes and workflows.\r\nAs mentioned above,
    a critical question KI.BAU explores is how we, as planners, builders and users,
    will communicate with architecture in the future, in its phases of creation and
    use but also beyond. This also involves, besides virtual interfaces, examining
    the physical interaction with a building, its behaviour, responsiveness and adaptation
    to certain conditions. \r\nThe primary goal of the research at KI.BAU is to transform
    architecture into an intelligent, to some degree self-sustaining, self-reflective
    and maybe even evolving ‘ecological system’. This system should be comprehensively
    linked with its creators, users, devices, computers, its (biological) environment
    and networks. Consequently, a building must be viewed as an organism that communicates,
    interacts and adapts to other connected or related organisms and entities.\r\n"
author:
- first_name: Hans
  full_name: Sachs, Hans
  id: '64589'
  last_name: Sachs
citation:
  ama: 'Sachs H. KI.BAU Artificial Intelligence in Architecture. In: Kretzer M, AADR
    – Art Architecture Design Research, eds. <i>Synthetic Realities: New Frontiers
    in AI-Driven Design, Fabrication and Materiality</i>. 1. AADR – Art Architecture
    Design Research; 2024:14.'
  apa: 'Sachs, H. (2024). KI.BAU Artificial Intelligence in Architecture. In M. Kretzer
    &#38; AADR – Art Architecture Design Research (Eds.), <i>Synthetic realities:
    New Frontiers in AI-driven Design, Fabrication and Materiality</i> (1., p. 14).
    AADR – Art Architecture Design Research.'
  bjps: '<b>Sachs H</b> (2024) KI.BAU Artificial Intelligence in Architecture. In
    Kretzer M and AADR – Art Architecture Design Research (eds), <i>Synthetic Realities:
    New Frontiers in AI-Driven Design, Fabrication and Materiality</i>, 1. Baunach:
    AADR – Art Architecture Design Research, p. 14.'
  chicago: 'Sachs, Hans. “KI.BAU Artificial Intelligence in Architecture.” In <i>Synthetic
    Realities: New Frontiers in AI-Driven Design, Fabrication and Materiality</i>,
    edited by Manuel Kretzer and AADR – Art Architecture Design Research, 1., 14.
    Baunach: AADR – Art Architecture Design Research, 2024.'
  chicago-de: 'Sachs, Hans. 2024. KI.BAU Artificial Intelligence in Architecture.
    In: <i>Synthetic realities: New Frontiers in AI-driven Design, Fabrication and
    Materiality</i>, hg. von Manuel Kretzer und AADR – Art Architecture Design Research,
    14. 1. Baunach: AADR – Art Architecture Design Research.'
  din1505-2-1: '<span style="font-variant:small-caps;">Sachs, Hans</span>: KI.BAU
    Artificial Intelligence in Architecture. In: <span style="font-variant:small-caps;">Kretzer,
    M.</span> ; <span style="font-variant:small-caps;">AADR – Art Architecture Design
    Research</span> (Hrsg.): <i>Synthetic realities: New Frontiers in AI-driven Design,
    Fabrication and Materiality</i>. 1. Baunach : AADR – Art Architecture Design Research,
    2024, S. 14'
  havard: 'H. Sachs, KI.BAU Artificial Intelligence in Architecture, in: M. Kretzer,
    AADR – Art Architecture Design Research (Eds.), Synthetic Realities: New Frontiers
    in AI-Driven Design, Fabrication and Materiality, 1., AADR – Art Architecture
    Design Research, Baunach, 2024: p. 14.'
  ieee: 'H. Sachs, “KI.BAU Artificial Intelligence in Architecture,” in <i>Synthetic
    realities: New Frontiers in AI-driven Design, Fabrication and Materiality</i>,
    1., M. Kretzer and AADR – Art Architecture Design Research, Eds. Baunach: AADR
    – Art Architecture Design Research, 2024, p. 14.'
  mla: 'Sachs, Hans. “KI.BAU Artificial Intelligence in Architecture.” <i>Synthetic
    Realities: New Frontiers in AI-Driven Design, Fabrication and Materiality</i>,
    edited by Manuel Kretzer and AADR – Art Architecture Design Research, 1., AADR
    – Art Architecture Design Research, 2024, p. 14.'
  short: 'H. Sachs, in: M. Kretzer, AADR – Art Architecture Design Research (Eds.),
    Synthetic Realities: New Frontiers in AI-Driven Design, Fabrication and Materiality,
    1., AADR – Art Architecture Design Research, Baunach, 2024, p. 14.'
  ufg: '<b>Sachs, Hans</b>: KI.BAU Artificial Intelligence in Architecture, in: <i>Kretzer,
    Manuel, AADR – Art Architecture Design Research (Hgg.)</i>: Synthetic realities:
    New Frontiers in AI-driven Design, Fabrication and Materiality, <span style="baseline">1.</span>,
    Baunach 2024,  S. 14.'
  van: 'Sachs H. KI.BAU Artificial Intelligence in Architecture. In: Kretzer M, AADR
    – Art Architecture Design Research, editors. Synthetic realities: New Frontiers
    in AI-driven Design, Fabrication and Materiality. 1. Baunach: AADR – Art Architecture
    Design Research; 2024. p. 14.'
corporate_editor:
- AADR – Art Architecture Design Research
date_created: 2025-09-11T10:50:08Z
date_updated: 2025-10-16T20:54:48Z
department:
- _id: DEP1624
- _id: DEP1055
edition: '1.'
editor:
- first_name: Manuel
  full_name: Kretzer, Manuel
  last_name: Kretzer
jel:
- A31
keyword:
- AI
- Artificial Intelligence
- Architecture
- Build Environment
- Building Construction
- Ecology of Architecture
language:
- iso: eng
page: '14'
place: Baunach
popular_science: '1'
publication: 'Synthetic realities: New Frontiers in AI-driven Design, Fabrication
  and Materiality'
publication_identifier:
  isbn:
  - 978-3887781088
publication_status: published
publisher: AADR – Art Architecture Design Research
related_material:
  link:
  - relation: new_edition
    url: https://aadr.info/product/synthetic-realities/
status: public
title: KI.BAU Artificial Intelligence in Architecture
type: book_chapter
user_id: '64589'
year: '2024'
...
---
_id: '11599'
abstract:
- lang: eng
  text: In a search for more sustainable materials, fungi have proven increasingly
    effective as a new building material. Mycelium composites are part of this discussion
    and experimentation. This research discusses the construction of a pavilion in
    a shell shape made of wooden construction elements filled with mycelium-hemp substrate.
    This paper explores how the fungus can work in symbiosis with other biomaterials,
    observing its behavior in two growth phases. The first growth phase took place
    in a temperature and humidity-controlled lab environment. The second phase was
    about testing the further growth behavior in an outdoor environment with a relatively
    wide range of temperature and humidity conditions.
author:
- first_name: Isabella
  full_name: Sanches Previti, Isabella
  id: '81145'
  last_name: Sanches Previti
- first_name: Hans
  full_name: Sachs, Hans
  id: '64589'
  last_name: Sachs
citation:
  ama: 'Sanches Previti I, Sachs H. <i>Mycelion: A Wood-Mycelium Composite-Based,
    Experimental Pavilion with Multiple Growth Phases</i>. (García Amen F, Armagno
    A Ángel, Goñi AL, eds.). CumInCAD; 2023:409-420.'
  apa: 'Sanches Previti, I., &#38; Sachs, H. (2023). Mycelion: A wood-mycelium composite-based,
    experimental pavilion with multiple growth phases. In F. García Amen, A. Armagno
    Ángel, &#38; A. L. Goñi (Eds.), <i>SIGraDi 2023  Accelerated Landscapes XXVII
    International Conference of the Ibero-American Society of Digital Graphics</i>
    (pp. 409–420). CumInCAD.'
  bjps: '<b>Sanches Previti I and Sachs H</b> (2023) <i>Mycelion: A Wood-Mycelium
    Composite-Based, Experimental Pavilion with Multiple Growth Phases</i>, García
    Amen F, Armagno A Ángel and Goñi AL (eds). CumInCAD.'
  chicago: 'Sanches Previti, Isabella, and Hans Sachs. <i>Mycelion: A Wood-Mycelium
    Composite-Based, Experimental Pavilion with Multiple Growth Phases</i>. Edited
    by Fernando  García Amen, Armagno Armagno Ángel, and Ana Laura Goñi. <i>SIGraDi
    2023  Accelerated Landscapes XXVII International Conference of the Ibero-American
    Society of Digital Graphics</i>. CumInCAD, 2023.'
  chicago-de: 'Sanches Previti, Isabella und Hans Sachs. 2023. <i>Mycelion: A wood-mycelium
    composite-based, experimental pavilion with multiple growth phases</i>. Hg. von
    Fernando  García Amen, Armagno Armagno Ángel, und Ana Laura Goñi. <i>SIGraDi 2023 
    Accelerated Landscapes XXVII International Conference of the Ibero-American Society
    of Digital Graphics</i>. CumInCAD.'
  din1505-2-1: '<span style="font-variant:small-caps;">Sanches Previti, Isabella</span>
    ; <span style="font-variant:small-caps;">Sachs, Hans</span> ; <span style="font-variant:small-caps;">García
    Amen, F.</span> ; <span style="font-variant:small-caps;">Armagno, A., Ángel</span>
    ; <span style="font-variant:small-caps;">Goñi, A. L.</span> (Hrsg.): <i>Mycelion:
    A wood-mycelium composite-based, experimental pavilion with multiple growth phases</i> :
    CumInCAD, 2023'
  havard: 'I. Sanches Previti, H. Sachs, Mycelion: A wood-mycelium composite-based,
    experimental pavilion with multiple growth phases, CumInCAD, 2023.'
  ieee: 'I. Sanches Previti and H. Sachs, <i>Mycelion: A wood-mycelium composite-based,
    experimental pavilion with multiple growth phases</i>. CumInCAD, 2023, pp. 409–420.'
  mla: 'Sanches Previti, Isabella, and Hans Sachs. “Mycelion: A Wood-Mycelium Composite-Based,
    Experimental Pavilion with Multiple Growth Phases.” <i>SIGraDi 2023  Accelerated
    Landscapes XXVII International Conference of the Ibero-American Society of Digital
    Graphics</i>, edited by Fernando  García Amen et al., CumInCAD, 2023, pp. 409–20.'
  short: 'I. Sanches Previti, H. Sachs, Mycelion: A Wood-Mycelium Composite-Based,
    Experimental Pavilion with Multiple Growth Phases, CumInCAD, 2023.'
  ufg: '<b>Sanches Previti, Isabella/Sachs, Hans</b>: Mycelion: A wood-mycelium composite-based,
    experimental pavilion with multiple growth phases, hg. von García Amen, Fernando/Armagno,
    Armagno, Ángel/Goñi, Ana Laura, o. O. 2023.'
  van: 'Sanches Previti I, Sachs H. Mycelion: A wood-mycelium composite-based, experimental
    pavilion with multiple growth phases. García Amen F, Armagno A Ángel, Goñi AL,
    editors. SIGraDi 2023  Accelerated Landscapes XXVII International Conference of
    the Ibero-American Society of Digital Graphics. CumInCAD; 2023.'
conference:
  end_date: 2023-12-01
  location: Punta del Este, Maldonado, Uruguay
  name: 'XXVII International Conference of the Ibero-American Society of Digital Graphics
    ; SIGraDi 2023  Accelerated Landscapes '
  start_date: 2023-11-29
date_created: 2024-06-26T16:04:14Z
date_updated: 2024-07-01T08:52:57Z
ddc:
- '690'
department:
- _id: DEP1024
editor:
- first_name: 'Fernando '
  full_name: 'García Amen, Fernando '
  last_name: García Amen
- first_name: Armagno, Ángel
  full_name: Armagno, Armagno, Ángel
  last_name: Armagno
- first_name: Ana Laura
  full_name: Goñi, Ana Laura
  last_name: Goñi
has_accepted_license: '1'
keyword:
- Digital fabrication
- Mycelium-based construction
- Growing phases
- Computational design
- Bioconstruction
language:
- iso: eng
main_file_link:
- open_access: '1'
  url: https://papers.cumincad.org/cgi-bin/works/paper/sigradi2023_84
oa: '1'
page: 409-420
publication: SIGraDi 2023  Accelerated Landscapes XXVII International Conference of
  the Ibero-American Society of Digital Graphics
publication_identifier:
  unknown:
  - 978-9915-9635-0-1
publication_status: published
publisher: CumInCAD
status: public
title: 'Mycelion: A wood-mycelium composite-based, experimental pavilion with multiple
  growth phases'
type: conference_editor_article
user_id: '83781'
year: '2023'
...
---
_id: '13021'
abstract:
- lang: eng
  text: Natural ventilation in a building is an effective way to achieve acceptable
    indoor air quality. Ventilation dilutes contaminants such as bioeffluents generated
    by occupants, substances emitted from building materials, and the water vapor
    generated by occupants’ activities. In a building that requires heating and cooling,
    adequate ventilation is crucial to minimize energy consumption while maintaining
    healthy indoor air quality. However, measuring the actual magnitude of the natural
    ventilation rate, including infiltration through the building envelope and airflow
    through the building openings, is not always feasible. Although international
    and national standards suggested the required ventilation rates to maintain acceptable
    indoor air quality in buildings, they did not offer action plans to achieve or
    evaluate those design ventilation rates in buildings in use. In this study, the
    occupant-generated carbon dioxide (CO2) tracer gas decay method was applied to
    estimate the ventilation rates in an office room in Seoul, South Korea, from summer
    to winter. Using the method, real-time ventilation rates can be calculated by
    monitoring indoor and outdoor CO2 concentrations without injecting a tracer gas.
    For natural ventilation in the test room, 145 mm-diameter circular openings on
    the fixed glass were used. As a result, first, the indoor CO2 concentrations were
    used as an indicator to evaluate how much the indoor air quality deteriorated
    when all the windows were closed in an occupied office room compared to the international
    standards for indoor air quality. Moreover, we found out that the estimated ventilation
    rates varied depending on various environmental conditions, even with the same
    openings for natural ventilation. Considering the indoor and outdoor temperature
    differences and outdoor wind speeds as the main factors influencing the ventilation
    rates, we analyzed how they affected the ventilation rates in the different seasons
    of South Korea. When the wind speeds were calm, less than 2 m/s, the temperature
    difference played as a factor that influenced the estimated ventilation rates.
    On the other hand, when the temperature differences were low, less than 3 °C,
    the wind speed was the primary factor. This study raises awareness about the risk
    of poor indoor air quality in office rooms that could lead to health problems
    or unpleasant working environments. This study presents an example of estimating
    the ventilation rates in an existing building. By using the presented method,
    the ventilation rate in an existing building can be simply estimated while using
    the building as usual, and appropriate ventilation strategies for the building
    can be determined to maintain the desired indoor air quality.
article_number: '9892'
author:
- first_name: Hyeonji
  full_name: Seol, Hyeonji
  id: '77436'
  last_name: Seol
- first_name: Daniel
  full_name: Arztmann, Daniel
  id: '58805'
  last_name: Arztmann
- first_name: Naree
  full_name: Kim, Naree
  last_name: Kim
- first_name: Alvaro
  full_name: Balderrama, Alvaro
  id: '79418'
  last_name: Balderrama
citation:
  ama: Seol H, Arztmann D, Kim N, Balderrama A. Estimation of Natural Ventilation
    Rates in an Office Room with 145 mm-Diameter Circular Openings Using the Occupant-Generated
    Tracer-Gas Method. <i>Sustainability</i>. 2023;15(13). doi:<a href="https://doi.org/10.3390/su15139892">10.3390/su15139892</a>
  apa: Seol, H., Arztmann, D., Kim, N., &#38; Balderrama, A. (2023). Estimation of
    Natural Ventilation Rates in an Office Room with 145 mm-Diameter Circular Openings
    Using the Occupant-Generated Tracer-Gas Method. <i>Sustainability</i>, <i>15</i>(13),
    Article 9892. <a href="https://doi.org/10.3390/su15139892">https://doi.org/10.3390/su15139892</a>
  bjps: <b>Seol H <i>et al.</i></b> (2023) Estimation of Natural Ventilation Rates
    in an Office Room with 145 Mm-Diameter Circular Openings Using the Occupant-Generated
    Tracer-Gas Method. <i>Sustainability</i> <b>15</b>.
  chicago: Seol, Hyeonji, Daniel Arztmann, Naree Kim, and Alvaro Balderrama. “Estimation
    of Natural Ventilation Rates in an Office Room with 145 Mm-Diameter Circular Openings
    Using the Occupant-Generated Tracer-Gas Method.” <i>Sustainability</i> 15, no.
    13 (2023). <a href="https://doi.org/10.3390/su15139892">https://doi.org/10.3390/su15139892</a>.
  chicago-de: Seol, Hyeonji, Daniel Arztmann, Naree Kim und Alvaro Balderrama. 2023.
    Estimation of Natural Ventilation Rates in an Office Room with 145 mm-Diameter
    Circular Openings Using the Occupant-Generated Tracer-Gas Method. <i>Sustainability</i>
    15, Nr. 13. doi:<a href="https://doi.org/10.3390/su15139892">10.3390/su15139892</a>,
    .
  din1505-2-1: '<span style="font-variant:small-caps;">Seol, Hyeonji</span> ; <span
    style="font-variant:small-caps;">Arztmann, Daniel</span> ; <span style="font-variant:small-caps;">Kim,
    Naree</span> ; <span style="font-variant:small-caps;">Balderrama, Alvaro</span>:
    Estimation of Natural Ventilation Rates in an Office Room with 145 mm-Diameter
    Circular Openings Using the Occupant-Generated Tracer-Gas Method. In: <i>Sustainability</i>
    Bd. 15. Basel, MDPI (2023), Nr. 13'
  havard: H. Seol, D. Arztmann, N. Kim, A. Balderrama, Estimation of Natural Ventilation
    Rates in an Office Room with 145 mm-Diameter Circular Openings Using the Occupant-Generated
    Tracer-Gas Method, Sustainability. 15 (2023).
  ieee: 'H. Seol, D. Arztmann, N. Kim, and A. Balderrama, “Estimation of Natural Ventilation
    Rates in an Office Room with 145 mm-Diameter Circular Openings Using the Occupant-Generated
    Tracer-Gas Method,” <i>Sustainability</i>, vol. 15, no. 13, Art. no. 9892, 2023,
    doi: <a href="https://doi.org/10.3390/su15139892">10.3390/su15139892</a>.'
  mla: Seol, Hyeonji, et al. “Estimation of Natural Ventilation Rates in an Office
    Room with 145 Mm-Diameter Circular Openings Using the Occupant-Generated Tracer-Gas
    Method.” <i>Sustainability</i>, vol. 15, no. 13, 9892, 2023, <a href="https://doi.org/10.3390/su15139892">https://doi.org/10.3390/su15139892</a>.
  short: H. Seol, D. Arztmann, N. Kim, A. Balderrama, Sustainability 15 (2023).
  ufg: '<b>Seol, Hyeonji u. a.</b>: Estimation of Natural Ventilation Rates in an
    Office Room with 145 mm-Diameter Circular Openings Using the Occupant-Generated
    Tracer-Gas Method, in: <i>Sustainability</i> 15 (2023), H. 13.'
  van: Seol H, Arztmann D, Kim N, Balderrama A. Estimation of Natural Ventilation
    Rates in an Office Room with 145 mm-Diameter Circular Openings Using the Occupant-Generated
    Tracer-Gas Method. Sustainability. 2023;15(13).
date_created: 2025-06-24T13:53:29Z
date_updated: 2025-06-24T13:55:57Z
department:
- _id: DEP1600
- _id: DEP1634
doi: 10.3390/su15139892
intvolume: '        15'
issue: '13'
keyword:
- Management
- Monitoring
- Policy and Law
- Renewable Energy
- Sustainability and the Environment
- Geography
- Planning and Development
- Building and Construction
language:
- iso: eng
place: Basel
publication: Sustainability
publication_identifier:
  issn:
  - 2071-1050
publication_status: published
publisher: MDPI
quality_controlled: '1'
status: public
title: Estimation of Natural Ventilation Rates in an Office Room with 145 mm-Diameter
  Circular Openings Using the Occupant-Generated Tracer-Gas Method
type: scientific_journal_article
user_id: '83781'
volume: 15
year: '2023'
...
---
_id: '13372'
abstract:
- lang: eng
  text: "This bachelor thesis explores the adaptive reuse of the former Telekom high-rise
    at Kesselbrink in Bielefeld, a vacant modernist office tower awaiting new purpose.
    The project proposes a mixed-use transformation that reinterprets the building
    as a “city within the city,” inspired by Le Corbusier’s Unité d’Habitation in
    Marseille. The existing structure is strategically reduced to its essential load-bearing
    concrete frame and floor slabs, preserving the structural skeleton while enabling
    radical spatial reconfiguration.\r\nPrefabricated timber modules are inserted
    and cantilevered between the reinforced-concrete columns, extending the usable
    floor area and introducing a warm, contemporary material contrast to the original
    façade. This intervention not only increases density and flexibility but also
    redefines the tower’s appearance, giving it a cosmopolitan and forward-looking
    architectural identity. The ground floor is conceived as an open and publicly
    accessible urban platform, activating the surrounding plaza and strengthening
    social interaction. Upper floors are redesigned as affordable and attractive living
    spaces for young residents, encouraging a diverse and vibrant community within
    the building.\r\nA newly designed park-like rooftop landscape provides recreational
    space and panoramic views over the city, enhancing environmental quality and urban
    connectivity. By combining structural preservation, modular timber construction,
    public programming, and residential reuse, the proposal demonstrates how high-rise
    retrofitting can generate social, ecological, and economic value simultaneously.
    The project positions adaptive reuse as a viable strategy for sustainable urban
    regeneration and architectural longevity."
author:
- first_name: Leon
  full_name: Konschake, Leon
  id: '84541'
  last_name: Konschake
  orcid: https://orcid.org/0009-0000-5181-1573
citation:
  ama: Konschake L. <i>TreeTower</i>. Technische Hochschule Ostwestfalen-Lippe; 2020.
  apa: Konschake, L. (2020). <i>TreeTower</i>. Technische Hochschule Ostwestfalen-Lippe.
  bjps: '<b>Konschake L</b> (2020) <i>TreeTower</i>. Detmolder Schule für Gestaltung:
    Technische Hochschule Ostwestfalen-Lippe.'
  chicago: 'Konschake, Leon. <i>TreeTower</i>. Detmolder Schule für Gestaltung: Technische
    Hochschule Ostwestfalen-Lippe, 2020.'
  chicago-de: 'Konschake, Leon. 2020. <i>TreeTower</i>. Detmolder Schule für Gestaltung:
    Technische Hochschule Ostwestfalen-Lippe.'
  din1505-2-1: '<span style="font-variant:small-caps;">Konschake, Leon</span>: <i>TreeTower</i>.
    Detmolder Schule für Gestaltung : Technische Hochschule Ostwestfalen-Lippe, 2020'
  havard: L. Konschake, TreeTower, Technische Hochschule Ostwestfalen-Lippe, Detmolder
    Schule für Gestaltung, 2020.
  ieee: 'L. Konschake, <i>TreeTower</i>. Detmolder Schule für Gestaltung: Technische
    Hochschule Ostwestfalen-Lippe, 2020.'
  mla: Konschake, Leon. <i>TreeTower</i>. Technische Hochschule Ostwestfalen-Lippe,
    2020.
  short: L. Konschake, TreeTower, Technische Hochschule Ostwestfalen-Lippe, Detmolder
    Schule für Gestaltung, 2020.
  ufg: '<b>Konschake, Leon</b>: TreeTower, Detmolder Schule für Gestaltung 2020.'
  van: 'Konschake L. TreeTower. Detmolder Schule für Gestaltung: Technische Hochschule
    Ostwestfalen-Lippe; 2020.'
date_created: 2026-02-12T11:47:28Z
date_updated: 2026-02-20T07:09:36Z
department:
- _id: DEP1600
extern: '1'
keyword:
- Adaptive Reuse
- Mixed-Use Development
- High-Rise Transformation
- City within the City
- Modular Timber Construction
- Prefabrication
- Structural Preservation
- Concrete Skeleton
- Cantilevered Modules
- Urban Regeneration
- Public Ground Floor
- Youth Housing
- Rooftop Landscape
- Sustainability
- Social Impact
- Ecological Design
- Economic Viability
- Cosmopolitan Architecture
language:
- iso: eng
place: Detmolder Schule für Gestaltung
publication_status: published
publisher: Technische Hochschule Ostwestfalen-Lippe
status: public
supervisor:
- first_name: Hans
  full_name: Sachs, Hans
  id: '64589'
  last_name: Sachs
title: TreeTower
type: bachelor_thesis
user_id: '83781'
year: '2020'
...
---
_id: '457'
abstract:
- lang: eng
  text: "Additive Manufacturing (AM) increasingly enables the realization of structures,
    which have a much greater freedom of design und can therefore better  use  nature
    \ as  a  design  ideal.  Bionic  design  principles  have  already been introduced
    \ into  general  design  approaches,  and  several topology optimization systems
    (TO) are available today to increase structural stiffness and  to  enable  lightweight
    \ design.  AM  and  TO,  used  in  synergy,  promise completely  new  application
    areas. However,  staircase effects resulting from a  layer-by-layer  build  process
    \ and  unavoidable  support  structures  which must be mechanically removed afterwards
    are disadvantageous with respect to surface texture and strength properties.\r\nThe
    present article addresses the question  of how far the notches resulting from
    the staircase effect of Additive Manufacturing and the support structures  removed
    \ decrease  the  strength  of  components.  Most  engineers try  to follow the
    inner flow of forces in a part’s design by smoothening surfaces in notched areas.
    Considering  this,  a  elected component  is investigated  with  finite  element
    \ analysis  (FEA)  with  special  regard  for  the concentration  of  tress arising
    from surface notch effects. An outlook is given as regards how a reduction of
    the notch effect from the taircase effect can be achieved effectively."
author:
- first_name: Eva
  full_name: Scheideler, Eva
  id: '61522'
  last_name: Scheideler
- first_name: Franz-Josef
  full_name: Villmer, Franz-Josef
  id: '14290'
  last_name: Villmer
- first_name: G.
  full_name: Adam, G.
  last_name: Adam
- first_name: Mirco
  full_name: Timmer, Mirco
  id: '69228'
  last_name: Timmer
conference:
  end_date: 2016-09-30
  location: Lemgo
  name: Proceedings 6th International Conference
  start_date: 2016-09-29
corporate_editor:
- Department of Production Engineering and Management  OWL University of Applied Sciences,
  Lemgo (Germany)
- Hochschule Ostwestfalen-Lippe
date_created: 2019-01-22T14:07:32Z
date_updated: 2023-03-15T13:49:54Z
department:
- _id: DEP1306
editor:
- first_name: Franz-Josef
  full_name: Villmer, Franz-Josef
  id: '14290'
  last_name: Villmer
- first_name: Elio
  full_name: Padoano, Elio
  last_name: Padoano
issue: '1'
keyword:
- Additive  Manufacturing
- Topology optimization
- Staircase effect
- Support structures
- Stress concentration
- Lightweight construction
- Design rules
- Notch effect
language:
- iso: eng
main_file_link:
- open_access: '1'
  url: https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf
oa: '1'
page: 39-50
place: Lemgo
publication: Production Engineering and Management Proceedings 6th International Conference
publication_identifier:
  isbn:
  - 978-3-946856-00-9
publication_status: published
status: public
title: Topology Optimization and Additive Manufacturing – A Perfect Symbiosis?
type: conference
user_id: '79260'
year: 2016
...
