[{"type":"scientific_journal_article","user_id":"83781","intvolume":" 63","place":"London [u.a.]","doi":"10.1080/00423114.2025.2480820","_id":"13022","isi":"1","publication_status":"published","department":[{"_id":"DEP6020"},{"_id":"DEP5022"}],"abstract":[{"lang":"eng","text":"Numerous single-track railway lines are currently disused due to economic factors. These lines could potentially be reactivated by small vehicles that utilise only a single rail, enabling bidirectional operation simultaneously. The MONOCAB is such a compact monorail vehicle, stabilised by a system of control moment gyroscopes (CMGs) and a laterally movable, controllable trim mass. Despite their potential, there is currently a lack of comparative references for MONOCABs in relation to other vehicles. In the context of mechanical design and construction, interdependencies with roll stabilisation occur. Of particular concern are torsional effects, which can significantly impact stability. This study investigates the structural dynamics of monorail vehicles with a focus on the influence of gyroscopes. Gyroscopic systems play a significant role in the behaviour of such vehicles, affecting stability, control and response to external disturbances. Through a comprehensive approach encompassing analytical modelling, numerical simulations, and experimental validation, the interactions between the vehicle's structure and gyroscopic components are explored. The analytical considerations are validated via experimentally derived frequency responses utilising a full-scale monorail vehicle. The results of this study have implications for various fields, such as transportation, robotics and aerospace engineering."}],"quality_controlled":"1","publisher":"Taylor & Francis","date_created":"2025-06-25T07:50:04Z","publication_identifier":{"eissn":["1744-5159"],"issn":["0042-3114"]},"publication":"Vehicle system dynamics : international journal of vehicle mechanics and mobility","date_updated":"2025-06-25T08:14:58Z","language":[{"iso":"eng"}],"keyword":["Vehicle dynamics","rail vehicle","control moment gyroscope","stabilisation control","motion control","stability analysis"],"title":"Gyroscopic effects in the structural dynamics of monorail vehicles","volume":63,"citation":{"ama":"Griese M, Schulte T. Gyroscopic effects in the structural dynamics of monorail vehicles. Vehicle system dynamics : international journal of vehicle mechanics and mobility. 2025;63. doi:10.1080/00423114.2025.2480820","ieee":"M. Griese and T. Schulte, “Gyroscopic effects in the structural dynamics of monorail vehicles,” Vehicle system dynamics : international journal of vehicle mechanics and mobility, vol. 63, 2025, doi: 10.1080/00423114.2025.2480820.","short":"M. Griese, T. Schulte, Vehicle System Dynamics : International Journal of Vehicle Mechanics and Mobility 63 (2025).","chicago-de":"Griese, Martin und Thomas Schulte. 2025. Gyroscopic effects in the structural dynamics of monorail vehicles. Vehicle system dynamics : international journal of vehicle mechanics and mobility 63. doi:10.1080/00423114.2025.2480820, .","din1505-2-1":"Griese, Martin ; Schulte, Thomas: Gyroscopic effects in the structural dynamics of monorail vehicles. In: Vehicle system dynamics : international journal of vehicle mechanics and mobility Bd. 63. London [u.a.], Taylor & Francis (2025)","van":"Griese M, Schulte T. Gyroscopic effects in the structural dynamics of monorail vehicles. Vehicle system dynamics : international journal of vehicle mechanics and mobility. 2025;63.","ufg":"Griese, Martin/Schulte, Thomas: Gyroscopic effects in the structural dynamics of monorail vehicles, in: Vehicle system dynamics : international journal of vehicle mechanics and mobility 63 (2025).","havard":"M. Griese, T. Schulte, Gyroscopic effects in the structural dynamics of monorail vehicles, Vehicle System Dynamics : International Journal of Vehicle Mechanics and Mobility. 63 (2025).","mla":"Griese, Martin, and Thomas Schulte. “Gyroscopic Effects in the Structural Dynamics of Monorail Vehicles.” Vehicle System Dynamics : International Journal of Vehicle Mechanics and Mobility, vol. 63, 2025, https://doi.org/10.1080/00423114.2025.2480820.","bjps":"Griese M and Schulte T (2025) Gyroscopic Effects in the Structural Dynamics of Monorail Vehicles. Vehicle system dynamics : international journal of vehicle mechanics and mobility 63.","apa":"Griese, M., & Schulte, T. (2025). Gyroscopic effects in the structural dynamics of monorail vehicles. Vehicle System Dynamics : International Journal of Vehicle Mechanics and Mobility, 63. https://doi.org/10.1080/00423114.2025.2480820","chicago":"Griese, Martin, and Thomas Schulte. “Gyroscopic Effects in the Structural Dynamics of Monorail Vehicles.” Vehicle System Dynamics : International Journal of Vehicle Mechanics and Mobility 63 (2025). https://doi.org/10.1080/00423114.2025.2480820."},"author":[{"first_name":"Martin","last_name":"Griese","full_name":"Griese, Martin","id":"52308"},{"full_name":"Schulte, Thomas","last_name":"Schulte","id":"46242","first_name":"Thomas"}],"year":"2025","external_id":{"isi":["001467951500001"]},"status":"public"},{"date_created":"2024-05-02T09:46:19Z","publication":" Advances in Dynamics of Vehicles on Roads and Tracks III Proceedings of the 28th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2023, August 21–25, 2023, Ottawa, Canada - Volume 1: Rail Vehicles","publication_identifier":{"eisbn":["978-3-031-66971-2"],"issn":["2195-4356"],"eissn":["2195-4364"],"isbn":["978-3-031-66970-5"]},"date_updated":"2025-06-25T12:36:58Z","editor":[{"last_name":"Huang","first_name":"Wei ","full_name":"Huang, Wei "},{"last_name":"Ahmadian","first_name":"Mehdi ","full_name":"Ahmadian, Mehdi "}],"language":[{"iso":"eng"}],"keyword":["field and laboratory testing","autonomous railway vehicles","vehicle control and mechatronics","co-simulation"],"title":"Simulation of a Longitudinal Control System for an Automated Driving Self-Stabilized Monorail Vehicle","citation":{"short":"R. Hanselle, D. Stork, S. Lück, R. Rasche, R. Naumann, S. Witte, Simulation of a Longitudinal Control System for an Automated Driving Self-Stabilized Monorail Vehicle, Springer Nature, 2024.","din1505-2-1":"Hanselle, Raphael ; Stork, Dominic ; Lück, Sönke ; Rasche, Rainer ; Naumann, Rolf ; Witte, Stefan ; Huang, W. ; Ahmadian, M. (Hrsg.): Simulation of a Longitudinal Control System for an Automated Driving Self-Stabilized Monorail Vehicle, Lecture Notes in Mechanical Engineering ((LNME)) : Springer Nature, 2024","chicago-de":"Hanselle, Raphael, Dominic Stork, Sönke Lück, Rainer Rasche, Rolf Naumann und Stefan Witte. 2024. Simulation of a Longitudinal Control System for an Automated Driving Self-Stabilized Monorail Vehicle. Hg. von Wei Huang und Mehdi Ahmadian. Advances in Dynamics of Vehicles on Roads and Tracks III Proceedings of the 28th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2023, August 21–25, 2023, Ottawa, Canada - Volume 1: Rail Vehicles. Lecture Notes in Mechanical Engineering ((LNME)) . Springer Nature. doi:https://doi.org/10.1007/978-3-031-66971-2_54, .","apa":"Hanselle, R., Stork, D., Lück, S., Rasche, R., Naumann, R., & Witte, S. (2024). Simulation of a Longitudinal Control System for an Automated Driving Self-Stabilized Monorail Vehicle. In W. Huang & M. Ahmadian (Eds.), Advances in Dynamics of Vehicles on Roads and Tracks III Proceedings of the 28th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2023, August 21–25, 2023, Ottawa, Canada - Volume 1: Rail Vehicles (pp. 514–523). Springer Nature. https://doi.org/10.1007/978-3-031-66971-2_54","chicago":"Hanselle, Raphael, Dominic Stork, Sönke Lück, Rainer Rasche, Rolf Naumann, and Stefan Witte. Simulation of a Longitudinal Control System for an Automated Driving Self-Stabilized Monorail Vehicle. Edited by Wei Huang and Mehdi Ahmadian. Advances in Dynamics of Vehicles on Roads and Tracks III Proceedings of the 28th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2023, August 21–25, 2023, Ottawa, Canada - Volume 1: Rail Vehicles. Lecture Notes in Mechanical Engineering ((LNME)) . Springer Nature, 2024. https://doi.org/10.1007/978-3-031-66971-2_54.","van":"Hanselle R, Stork D, Lück S, Rasche R, Naumann R, Witte S. Simulation of a Longitudinal Control System for an Automated Driving Self-Stabilized Monorail Vehicle. Huang W, Ahmadian M, editors. Advances in Dynamics of Vehicles on Roads and Tracks III Proceedings of the 28th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2023, August 21–25, 2023, Ottawa, Canada - Volume 1: Rail Vehicles. Springer Nature; 2024. ( Lecture Notes in Mechanical Engineering ((LNME)) ).","havard":"R. Hanselle, D. Stork, S. Lück, R. Rasche, R. Naumann, S. Witte, Simulation of a Longitudinal Control System for an Automated Driving Self-Stabilized Monorail Vehicle, Springer Nature, 2024.","bjps":"Hanselle R et al. (2024) Simulation of a Longitudinal Control System for an Automated Driving Self-Stabilized Monorail Vehicle, Huang W and Ahmadian M (eds). Springer Nature.","mla":"Hanselle, Raphael, et al. “Simulation of a Longitudinal Control System for an Automated Driving Self-Stabilized Monorail Vehicle.” Advances in Dynamics of Vehicles on Roads and Tracks III Proceedings of the 28th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2023, August 21–25, 2023, Ottawa, Canada - Volume 1: Rail Vehicles, edited by Wei Huang and Mehdi Ahmadian, Springer Nature, 2024, pp. 514–23, https://doi.org/10.1007/978-3-031-66971-2_54.","ufg":"Hanselle, Raphael u. a.: Simulation of a Longitudinal Control System for an Automated Driving Self-Stabilized Monorail Vehicle, hg. von Huang, Wei/Ahmadian, Mehdi, o. O. 2024 ( Lecture Notes in Mechanical Engineering ((LNME)) ).","ieee":"R. Hanselle, D. Stork, S. Lück, R. Rasche, R. Naumann, and S. Witte, Simulation of a Longitudinal Control System for an Automated Driving Self-Stabilized Monorail Vehicle. Springer Nature, 2024, pp. 514–523. doi: https://doi.org/10.1007/978-3-031-66971-2_54.","ama":"Hanselle R, Stork D, Lück S, Rasche R, Naumann R, Witte S. Simulation of a Longitudinal Control System for an Automated Driving Self-Stabilized Monorail Vehicle. (Huang W, Ahmadian M, eds.). Springer Nature; 2024:514-523. doi:https://doi.org/10.1007/978-3-031-66971-2_54"},"author":[{"first_name":"Raphael","last_name":"Hanselle","id":"79443","full_name":"Hanselle, Raphael"},{"full_name":"Stork, Dominic","first_name":"Dominic","last_name":"Stork"},{"first_name":"Sönke","full_name":"Lück, Sönke","last_name":"Lück"},{"full_name":"Rasche, Rainer","last_name":"Rasche","first_name":"Rainer","id":"74574"},{"last_name":"Naumann","full_name":"Naumann, Rolf","first_name":"Rolf"},{"first_name":"Stefan","last_name":"Witte","full_name":"Witte, Stefan","id":"1605"}],"year":"2024","page":"514-523","status":"public","type":"conference_editor_article","user_id":"83781","doi":"https://doi.org/10.1007/978-3-031-66971-2_54","_id":"11432","series_title":" Lecture Notes in Mechanical Engineering ((LNME)) ","publication_status":"published","conference":{"location":"Ottawa, Canada","name":"28th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2023","end_date":"2023-08-25","start_date":"2023-08-21"},"department":[{"_id":"DEP5000"}],"abstract":[{"text":"Currently, numerous single track railway lines are disused due to economic reasons. One way they could be reactivated for bidirectional on demand traffic is by small cabin-like vehicles, lateral stabilized by a system of control moment gyroscopes and a moveable mass. Regarding such a vehicle, there is currently no reference in comparison with other vehicles and no experimental experience or the like. To ensure the functionality and safety of the vehicle even before its realization, a model-based design is carried out for development, analysis, optimization and testing. This paper is focused on the co-simulation of such a vehicle that is controlled by a longitudinal control. In order to take into account the complex interaction between the longitudinal dynamics and the running gear, the entire system must be considered here including the wheel/rail interaction. Co-simulations are performed considering both the mechanical model of the vehicle and the control of the longitudinal dynamics of the overall system. The simulation results show that functionality and safe operation can be ensured by the vehicle longitudinal controls. As a result, the simulation and the measurement of the real system show a good match. By means of HIL and co-simulations, function tests could be shifted to earlier development stages, in order to accelerate the overall development.","lang":"eng"}],"quality_controlled":"1","publisher":"Springer Nature"},{"intvolume":" 24","user_id":"83781","type":"scientific_journal_article","doi":"10.3390/s24113520","article_number":"3520","_id":"11495","article_type":"original","publication_status":"published","isi":"1","quality_controlled":"1","publisher":"MDPI","abstract":[{"lang":"eng","text":"To evaluate the suitability of an analytical instrument, essential figures of merit such as the limit of detection (LOD) and the limit of quantification (LOQ) can be employed. However, as the definitions k nown in the literature are mostly applicable to one signal per sample, estimating the LOD for substances with instruments yielding multidimensional results like electronic noses (eNoses) is still challenging. In this paper, we will compare and present different approaches to estimate the LOD for eNoses by employing commonly used multivariate data analysis and regression techniques, including principal component analysis (PCA), principal component regression (PCR), as well as partial least squares regression (PLSR). These methods could subsequently be used to assess the suitability of eNoses to help control and steer processes where volatiles are key process parameters. As a use case, we determined the LODs for key compounds involved in beer maturation, namely acetaldehyde, diacetyl, dimethyl sulfide, ethyl acetate, isobutanol, and 2-phenylethanol, and discussed the suitability of our eNose for that dertermination process. The results of the methods performed demonstrated differences of up to a factor of eight. For diacetyl, the LOD and the LOQ were sufficiently low to suggest potential for monitoring via eNose. "}],"issue":"11","department":[{"_id":"DEP4028"}],"date_updated":"2025-06-25T13:00:14Z","date_created":"2024-06-03T07:43:48Z","publication":"Sensors","publication_identifier":{"issn":["1424-8220 "]},"language":[{"iso":"eng"}],"keyword":["multidimensional sensor arrays","MOS sensors","beer fermentation","process control","gas analysis","metal oxide semiconductors","intentional data analysis","chemometrics","PLSR","PCA","first-order calibration"],"oa":"1","volume":24,"citation":{"ama":"Kruse J, Wörner J, Schneider J, Dörksen H, Pein-Hackelbusch M. Methods for Estimating the Detection and Quantification Limits of Key Substances in Beer Maturation with Electronic Noses . Sensors. 2024;24(11). doi:10.3390/s24113520","ieee":"J. Kruse, J. Wörner, J. Schneider, H. Dörksen, and M. Pein-Hackelbusch, “Methods for Estimating the Detection and Quantification Limits of Key Substances in Beer Maturation with Electronic Noses ,” Sensors, vol. 24, no. 11, Art. no. 3520, 2024, doi: 10.3390/s24113520.","van":"Kruse J, Wörner J, Schneider J, Dörksen H, Pein-Hackelbusch M. Methods for Estimating the Detection and Quantification Limits of Key Substances in Beer Maturation with Electronic Noses . Sensors. 2024;24(11).","ufg":"Kruse, Julia u. a.: Methods for Estimating the Detection and Quantification Limits of Key Substances in Beer Maturation with Electronic Noses , in: Sensors 24 (2024), H. 11.","bjps":"Kruse J et al. (2024) Methods for Estimating the Detection and Quantification Limits of Key Substances in Beer Maturation with Electronic Noses . Sensors 24.","mla":"Kruse, Julia, et al. “Methods for Estimating the Detection and Quantification Limits of Key Substances in Beer Maturation with Electronic Noses .” Sensors, vol. 24, no. 11, 3520, 2024, https://doi.org/10.3390/s24113520.","havard":"J. Kruse, J. Wörner, J. Schneider, H. Dörksen, M. Pein-Hackelbusch, Methods for Estimating the Detection and Quantification Limits of Key Substances in Beer Maturation with Electronic Noses , Sensors. 24 (2024).","apa":"Kruse, J., Wörner, J., Schneider, J., Dörksen, H., & Pein-Hackelbusch, M. (2024). Methods for Estimating the Detection and Quantification Limits of Key Substances in Beer Maturation with Electronic Noses . Sensors, 24(11), Article 3520. https://doi.org/10.3390/s24113520","chicago":"Kruse, Julia, Julius Wörner, Jan Schneider, Helene Dörksen, and Miriam Pein-Hackelbusch. “Methods for Estimating the Detection and Quantification Limits of Key Substances in Beer Maturation with Electronic Noses .” Sensors 24, no. 11 (2024). https://doi.org/10.3390/s24113520.","short":"J. Kruse, J. Wörner, J. Schneider, H. Dörksen, M. Pein-Hackelbusch, Sensors 24 (2024).","din1505-2-1":"Kruse, Julia ; Wörner, Julius ; Schneider, Jan ; Dörksen, Helene ; Pein-Hackelbusch, Miriam: Methods for Estimating the Detection and Quantification Limits of Key Substances in Beer Maturation with Electronic Noses . In: Sensors Bd. 24, MDPI (2024), Nr. 11","chicago-de":"Kruse, Julia, Julius Wörner, Jan Schneider, Helene Dörksen und Miriam Pein-Hackelbusch. 2024. Methods for Estimating the Detection and Quantification Limits of Key Substances in Beer Maturation with Electronic Noses . Sensors 24, Nr. 11. doi:10.3390/s24113520, ."},"title":"Methods for Estimating the Detection and Quantification Limits of Key Substances in Beer Maturation with Electronic Noses ","pmid":"1","status":"public","external_id":{"pmid":["38894312"],"isi":["001245424000001"]},"year":"2024","author":[{"first_name":"Julia","id":"82298","last_name":"Kruse","full_name":"Kruse, Julia"},{"id":"79011","full_name":"Wörner, Julius","last_name":"Wörner","first_name":"Julius"},{"first_name":"Jan","id":"13209","full_name":"Schneider, Jan","last_name":"Schneider","orcid":"0000-0001-6401-8873"},{"full_name":"Dörksen, Helene","id":"46416","last_name":"Dörksen","first_name":"Helene"},{"last_name":"Pein-Hackelbusch","id":"64952","first_name":"Miriam","full_name":"Pein-Hackelbusch, Miriam","orcid":"0000-0002-7920-0595"}],"main_file_link":[{"url":"https://www.mdpi.com/1424-8220/24/11/3520","open_access":"1"}]},{"date_created":"2025-03-09T18:43:48Z","publication_identifier":{"eisbn":["978-3-0356-2835-7"],"isbn":["978-3-0356-2833-3"]},"editor":[{"first_name":"Uta","id":"27166","full_name":"Pottgiesser, Uta","last_name":"Pottgiesser","orcid":"0000-0002-8594-3168"},{"full_name":"Tostoes, Ana","first_name":"Ana","last_name":"Tostoes"},{"full_name":"Uduku, Ola","last_name":"Uduku","first_name":"Ola"}],"corporate_editor":["Docomomo Internatonal "],"date_updated":"2025-03-10T08:37:04Z","oa":"1","language":[{"iso":"eng"}],"keyword":["Modern Movement","Architecture Of Independence","Luanda","Maputo","Addis Ababa","Lagos","Accra","African Modernism","Brutalism","Art Deco","Mid-20th Century Architecture","African Modernist Architecture","Architectural Photography","Postcolonial Architecture","Vernacular Architecture","Postcolonial History","Hospital","School Building","Peatfield & Bodgener Architects","Tropical Modernism","Pancho Guedes","Church","Cathedral","Architectural Heritage","Modernist Design","Modern Design","Thermal Comfort","Climate Control","João Garizo Do Carmo"],"title":"Modernism in Africa The Architecture of Angola, Ghana, Mozambique, Nigeria, Rwanda, South Africa, Sudan, Tanzania, Uganda","citation":{"chicago":"Pottgiesser, Uta, Ana Tostoes, Ola Uduku, and Docomomo Internatonal , eds. Modernism in Africa The Architecture of Angola, Ghana, Mozambique, Nigeria, Rwanda, South Africa, Sudan, Tanzania, Uganda. Berlin: Birkhäuser, 2024. https://doi.org/10.1515/9783035628357.","ieee":"U. Pottgiesser, A. Tostoes, O. Uduku, and Docomomo Internatonal , Eds., Modernism in Africa The Architecture of Angola, Ghana, Mozambique, Nigeria, Rwanda, South Africa, Sudan, Tanzania, Uganda. Berlin: Birkhäuser, 2024. doi: https://doi.org/10.1515/9783035628357.","apa":"Pottgiesser, U., Tostoes, A., Uduku, O., & Docomomo Internatonal (Eds.). (2024). Modernism in Africa The Architecture of Angola, Ghana, Mozambique, Nigeria, Rwanda, South Africa, Sudan, Tanzania, Uganda. Birkhäuser. https://doi.org/10.1515/9783035628357","havard":"U. Pottgiesser, A. Tostoes, O. Uduku, Docomomo Internatonal , eds., Modernism in Africa The Architecture of Angola, Ghana, Mozambique, Nigeria, Rwanda, South Africa, Sudan, Tanzania, Uganda, Birkhäuser, Berlin, 2024.","bjps":"Pottgiesser U et al. (eds) (2024) Modernism in Africa The Architecture of Angola, Ghana, Mozambique, Nigeria, Rwanda, South Africa, Sudan, Tanzania, Uganda. Berlin: Birkhäuser.","mla":"Pottgiesser, Uta, et al., editors. Modernism in Africa The Architecture of Angola, Ghana, Mozambique, Nigeria, Rwanda, South Africa, Sudan, Tanzania, Uganda. Birkhäuser, 2024, https://doi.org/10.1515/9783035628357.","ufg":"Pottgiesser, Uta u. a.: Modernism in Africa The Architecture of Angola, Ghana, Mozambique, Nigeria, Rwanda, South Africa, Sudan, Tanzania, Uganda, Berlin 2024.","ama":"Pottgiesser U, Tostoes A, Uduku O, Docomomo Internatonal , eds. Modernism in Africa The Architecture of Angola, Ghana, Mozambique, Nigeria, Rwanda, South Africa, Sudan, Tanzania, Uganda. Birkhäuser; 2024. doi:https://doi.org/10.1515/9783035628357","van":"Pottgiesser U, Tostoes A, Uduku O, Docomomo Internatonal , editors. Modernism in Africa The Architecture of Angola, Ghana, Mozambique, Nigeria, Rwanda, South Africa, Sudan, Tanzania, Uganda. Berlin: Birkhäuser; 2024.","chicago-de":"Pottgiesser, Uta, Ana Tostoes, Ola Uduku, und Docomomo Internatonal , Hrsg. 2024. Modernism in Africa The Architecture of Angola, Ghana, Mozambique, Nigeria, Rwanda, South Africa, Sudan, Tanzania, Uganda. Berlin: Birkhäuser. doi:https://doi.org/10.1515/9783035628357, .","din1505-2-1":"Pottgiesser, U. ; Tostoes, A. ; Uduku, O. ; Docomomo Internatonal (Hrsg.): Modernism in Africa The Architecture of Angola, Ghana, Mozambique, Nigeria, Rwanda, South Africa, Sudan, Tanzania, Uganda. Berlin : Birkhäuser, 2024","short":"U. Pottgiesser, A. Tostoes, O. Uduku, Docomomo Internatonal , eds., Modernism in Africa The Architecture of Angola, Ghana, Mozambique, Nigeria, Rwanda, South Africa, Sudan, Tanzania, Uganda, Birkhäuser, Berlin, 2024."},"year":"2024","main_file_link":[{"open_access":"1","url":"https://birkhauser.com/books/9783035628357"}],"status":"public","type":"book_editor","user_id":"83781","doi":"https://doi.org/10.1515/9783035628357","_id":"12673","place":"Berlin","publication_status":"published","abstract":[{"lang":"eng","text":"Many African countries are home to extraordinary architecture that is virtually unknown. There are interpretations of Art Deco, International Style, Brutalism as well as of African vernacular architecture. Climate-responsive buildings with a fluidity of interior and exterior spaces play a large role. While many of these 20th century architects were of European origin, they were deeply influenced by their surroundings and found original, site-specific expressions, often in collaboration with African architects. A focus of the construction activities were educational buildings which played an important role for these young nations that mostly gained their independence in the 1960s. While some of the documented buildings have been restored, others are still awaiting reconstruction."}],"department":[{"_id":"DEP1055"},{"_id":"DEP1620"}],"publisher":"Birkhäuser"},{"language":[{"iso":"ger"}],"keyword":["Industrielle Kommunikationstechnik","Industrielle Bildverarbeitung","Network reliability and redundancy methods","Networked Control Systems","Wireless real-time communication","Open Access"],"editor":[{"first_name":"Jürgen","last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen"},{"orcid":"0000-0002-3325-7887","first_name":"Volker","full_name":"Lohweg, Volker","last_name":"Lohweg","id":"1804"}],"date_updated":"2025-05-12T08:32:07Z","date_created":"2025-05-12T08:32:01Z","publication_identifier":{"issn":["2522-8579"],"isbn":["978-3-662-70996-2"],"eissn":["2522-8587"]},"page":"63","status":"public","year":"2024","volume":19,"citation":{"chicago":"Jasperneite, Jürgen, and Volker Lohweg, eds. Bildverarbeitung in der Automation: Ausgewählte Beiträge des Jahreskolloquiums BVAu 2024. Vol. 19. Technologien für die intelligente Automation. Berlin, Heidelberg: Springer Berlin Heidelberg, 2024.","apa":"Jasperneite, J., & Lohweg, V. (Eds.). (2024). Bildverarbeitung in der Automation: Ausgewählte Beiträge des Jahreskolloquiums BVAu 2024 (Vol. 19). Springer Berlin Heidelberg.","ieee":"J. Jasperneite and V. Lohweg, Eds., Bildverarbeitung in der Automation: Ausgewählte Beiträge des Jahreskolloquiums BVAu 2024, vol. 19. Berlin, Heidelberg: Springer Berlin Heidelberg, 2024.","ufg":"Jasperneite, Jürgen/Lohweg, Volker: Bildverarbeitung in der Automation: Ausgewählte Beiträge des Jahreskolloquiums BVAu 2024, Bd. 19, Berlin, Heidelberg 2024 (Technologien für die intelligente Automation).","havard":"J. Jasperneite, V. Lohweg, eds., Bildverarbeitung in der Automation: Ausgewählte Beiträge des Jahreskolloquiums BVAu 2024, Springer Berlin Heidelberg, Berlin, Heidelberg, 2024.","mla":"Jasperneite, Jürgen, and Volker Lohweg, editors. Bildverarbeitung in der Automation: Ausgewählte Beiträge des Jahreskolloquiums BVAu 2024. Springer Berlin Heidelberg, 2024.","bjps":"Jasperneite J and Lohweg V (eds) (2024) Bildverarbeitung in der Automation: Ausgewählte Beiträge des Jahreskolloquiums BVAu 2024. Berlin, Heidelberg: Springer Berlin Heidelberg.","van":"Jasperneite J, Lohweg V, editors. Bildverarbeitung in der Automation: Ausgewählte Beiträge des Jahreskolloquiums BVAu 2024. Berlin, Heidelberg: Springer Berlin Heidelberg; 2024. 63 p. (Technologien für die intelligente Automation; vol. 19).","ama":"Jasperneite J, Lohweg V, eds. Bildverarbeitung in der Automation: Ausgewählte Beiträge des Jahreskolloquiums BVAu 2024. Vol 19. Springer Berlin Heidelberg; 2024.","chicago-de":"Jasperneite, Jürgen und Volker Lohweg, Hrsg. 2024. Bildverarbeitung in der Automation: Ausgewählte Beiträge des Jahreskolloquiums BVAu 2024. Bd. 19. Technologien für die intelligente Automation. Berlin, Heidelberg: Springer Berlin Heidelberg.","din1505-2-1":"Jasperneite, J. ; Lohweg, V. (Hrsg.): Bildverarbeitung in der Automation: Ausgewählte Beiträge des Jahreskolloquiums BVAu 2024, Technologien für die intelligente Automation. Bd. 19. Berlin, Heidelberg : Springer Berlin Heidelberg, 2024","short":"J. Jasperneite, V. Lohweg, eds., Bildverarbeitung in der Automation: Ausgewählte Beiträge des Jahreskolloquiums BVAu 2024, Springer Berlin Heidelberg, Berlin, Heidelberg, 2024."},"title":"Bildverarbeitung in der Automation: Ausgewählte Beiträge des Jahreskolloquiums BVAu 2024","_id":"12908","place":"Berlin, Heidelberg","intvolume":" 19","user_id":"83781","type":"book_editor","publisher":"Springer Berlin Heidelberg","abstract":[{"lang":"eng","text":"In diesem Open-Access-Tagungsband sind die besten Beiträge des 9. Jahreskolloquiums \"Bildverarbeitung in der Automation\" (BVAu 2024) enthalten. Das Kolloquium fand am 05. November 2024 auf dem Innovation Campus Lemgo statt. Die vorgestellten neuesten Forschungsergebnisse auf den Gebieten der industriellen Bildverarbeitung erweitern den aktuellen Stand der Forschung und Technik. Die in den Beiträgen enthaltenen anschaulichen Anwendungsbeispiele aus dem Bereich der Automation setzen die Ergebnisse in den direkten Anwendungsbezug."}],"conference":{"name":"9. Jahreskolloquiums \"Bildverarbeitung in der Automation\" (BVAu 2020)","location":"Lemgo","start_date":"2024-11-05","end_date":"2024-11-05"},"department":[{"_id":"DEP5023"}],"publication_status":"published","series_title":"Technologien für die intelligente Automation"},{"place":"Piscataway, NJ","doi":"10.1109/aim46323.2023.10196189","_id":"11306","user_id":"83781","type":"conference_editor_article","publisher":"IEEE","conference":{"start_date":"2023-06-28","end_date":"2023-06-30","location":"Seattle, Wash.","name":"26th International Conference on Advanced Intelligent Mechatronics"},"department":[{"_id":"DEP6020"},{"_id":"DEP5022"}],"abstract":[{"lang":"eng","text":"Currently, numerous single-track railway lines are disused due to economic reasons. However, one way they could be reactivated for a bidirectional on-demand service traffic by small vehicles that use only one rail. MONOCABs are such small cabin-like vehicles, stabilized by a system of control moment gyroscopes and a trim mass. They could make an important contribution to improve the mobility offer especially in rural areas. Regarding the MONOCAB, there is currently no reference in comparison with other vehicles. It is mandatory to gain experience before transferring such a new vehicle concept into commercial operation. Especially the safe and robust commissioning of the stabilization control system is crucial and therefore requires an elaborated procedure. At this step, parameters related to the vertical dynamics have to be determined beforehand. This paper presents a comparative investigation of methods to estimate the moment of inertia and gravitational torque constant. Multiple methods in time-domain and frequency-domain are experimentally evaluated and compared with each other. Experimental tests are carried out with a full-scale monorail vehicle."}],"publication_status":"published","language":[{"iso":"eng"}],"keyword":["Parameter identification","Vehicle dynamics","Control moment gyroscope","Roll stabilization","Monorail vehicles"],"date_updated":"2025-06-26T07:47:48Z","corporate_editor":["Institute of Electrical and Electronics Engineers"],"date_created":"2024-04-02T14:32:35Z","publication":"2023 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM)","publication_identifier":{"isbn":["978-1-6654-7634-8"],"eisbn":["978-1-6654-7633-1"],"issn":["2159-6255"]},"page":"1196-1201","status":"public","author":[{"first_name":"Martin","last_name":"Griese","id":"52308","full_name":"Griese, Martin"},{"last_name":"Mousavi","id":"79148","full_name":"Mousavi, Seyed Davood","first_name":"Seyed Davood"},{"last_name":"Schulte","first_name":"Thomas","id":"46242","full_name":"Schulte, Thomas"}],"year":"2023","citation":{"chicago-de":"Griese, Martin, Seyed Davood Mousavi und Thomas Schulte. 2023. Parameter identification related to vertical dynamic of a self-stabilizing monorail vehicle. Hg. von Institute of Electrical and Electronics Engineers. 2023 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM). Piscataway, NJ: IEEE. doi:10.1109/aim46323.2023.10196189, .","din1505-2-1":"Griese, Martin ; Mousavi, Seyed Davood ; Schulte, Thomas ; Institute of Electrical and Electronics Engineers (Hrsg.): Parameter identification related to vertical dynamic of a self-stabilizing monorail vehicle. Piscataway, NJ : IEEE, 2023","short":"M. Griese, S.D. Mousavi, T. Schulte, Parameter Identification Related to Vertical Dynamic of a Self-Stabilizing Monorail Vehicle, IEEE, Piscataway, NJ, 2023.","ufg":"Griese, Martin/Mousavi, Seyed Davood/Schulte, Thomas: Parameter identification related to vertical dynamic of a self-stabilizing monorail vehicle, hg. von Institute of Electrical and Electronics Engineers, Piscataway, NJ 2023.","mla":"Griese, Martin, et al. “Parameter Identification Related to Vertical Dynamic of a Self-Stabilizing Monorail Vehicle.” 2023 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), edited by Institute of Electrical and Electronics Engineers, IEEE, 2023, pp. 1196–201, https://doi.org/10.1109/aim46323.2023.10196189.","havard":"M. Griese, S.D. Mousavi, T. Schulte, Parameter identification related to vertical dynamic of a self-stabilizing monorail vehicle, IEEE, Piscataway, NJ, 2023.","bjps":"Griese M, Mousavi SD and Schulte T (2023) Parameter Identification Related to Vertical Dynamic of a Self-Stabilizing Monorail Vehicle, Institute of Electrical and Electronics Engineers (ed.). Piscataway, NJ: IEEE.","van":"Griese M, Mousavi SD, Schulte T. Parameter identification related to vertical dynamic of a self-stabilizing monorail vehicle. Institute of Electrical and Electronics Engineers, editor. 2023 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM). Piscataway, NJ: IEEE; 2023.","chicago":"Griese, Martin, Seyed Davood Mousavi, and Thomas Schulte. Parameter Identification Related to Vertical Dynamic of a Self-Stabilizing Monorail Vehicle. Edited by Institute of Electrical and Electronics Engineers. 2023 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM). Piscataway, NJ: IEEE, 2023. https://doi.org/10.1109/aim46323.2023.10196189.","apa":"Griese, M., Mousavi, S. D., & Schulte, T. (2023). Parameter identification related to vertical dynamic of a self-stabilizing monorail vehicle. In Institute of Electrical and Electronics Engineers (Ed.), 2023 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM) (pp. 1196–1201). IEEE. https://doi.org/10.1109/aim46323.2023.10196189","ama":"Griese M, Mousavi SD, Schulte T. Parameter Identification Related to Vertical Dynamic of a Self-Stabilizing Monorail Vehicle. (Institute of Electrical and Electronics Engineers, ed.). IEEE; 2023:1196-1201. doi:10.1109/aim46323.2023.10196189","ieee":"M. Griese, S. D. Mousavi, and T. Schulte, Parameter identification related to vertical dynamic of a self-stabilizing monorail vehicle. Piscataway, NJ: IEEE, 2023, pp. 1196–1201. doi: 10.1109/aim46323.2023.10196189."},"title":"Parameter identification related to vertical dynamic of a self-stabilizing monorail vehicle"},{"date_updated":"2025-06-26T07:48:22Z","editor":[{"id":"1899","last_name":"Jasperneite","first_name":"Jürgen","full_name":"Jasperneite, Jürgen"},{"id":"1710","full_name":"Wisniewski, Lukasz","first_name":"Lukasz","last_name":"Wisniewski"},{"full_name":"Fung Man, Kim","last_name":"Fung Man","first_name":"Kim"}],"corporate_editor":["Institute of Electrical and Electronics Engineers "],"date_created":"2023-11-21T08:04:41Z","publication":"2023 IEEE 21st International Conference on Industrial Informatics (INDIN)","publication_identifier":{"isbn":["978-1-6654-9314-7 "],"issn":["1935-4576"],"eisbn":["978-1-6654-9313-0"]},"language":[{"iso":"eng"}],"keyword":["Spectroscopy","Production systems","Filtration","Velocity control","Optimization methods","Cyber-physical systems","Nonhomogeneous media"],"citation":{"short":"J. Tebbe, T. Pawlik, M. Trilling-Haasler, J. Löbner, M. Lange-Hegermann, J. Schneider, Holistic Optimization of a Dynamic Cross-Flow Filtration Process towards a Cyber-Physical System, IEEE, [Piscataway, NJ], 2023.","din1505-2-1":"Tebbe, Jörn ; Pawlik, Thomas ; Trilling-Haasler, Marc ; Löbner, Jannis ; Lange-Hegermann, Markus ; Schneider, Jan ; Jasperneite, J. ; Wisniewski, L. ; Fung Man, K. ; Institute of Electrical and Electronics Engineers (Hrsg.): Holistic optimization of a dynamic cross-flow filtration process towards a cyber-physical system. [Piscataway, NJ] : IEEE, 2023","chicago-de":"Tebbe, Jörn, Thomas Pawlik, Marc Trilling-Haasler, Jannis Löbner, Markus Lange-Hegermann und Jan Schneider. 2023. Holistic optimization of a dynamic cross-flow filtration process towards a cyber-physical system. Hg. von Jürgen Jasperneite, Lukasz Wisniewski, Kim Fung Man, und Institute of Electrical and Electronics Engineers . 2023 IEEE 21st International Conference on Industrial Informatics (INDIN). [Piscataway, NJ]: IEEE. doi:10.1109/INDIN51400.2023.10217913, .","apa":"Tebbe, J., Pawlik, T., Trilling-Haasler, M., Löbner, J., Lange-Hegermann, M., & Schneider, J. (2023). Holistic optimization of a dynamic cross-flow filtration process towards a cyber-physical system. In J. Jasperneite, L. Wisniewski, K. Fung Man, & Institute of Electrical and Electronics Engineers (Eds.), 2023 IEEE 21st International Conference on Industrial Informatics (INDIN) (pp. 1–7). IEEE. https://doi.org/10.1109/INDIN51400.2023.10217913","chicago":"Tebbe, Jörn, Thomas Pawlik, Marc Trilling-Haasler, Jannis Löbner, Markus Lange-Hegermann, and Jan Schneider. Holistic Optimization of a Dynamic Cross-Flow Filtration Process towards a Cyber-Physical System. Edited by Jürgen Jasperneite, Lukasz Wisniewski, Kim Fung Man, and Institute of Electrical and Electronics Engineers . 2023 IEEE 21st International Conference on Industrial Informatics (INDIN). [Piscataway, NJ]: IEEE, 2023. https://doi.org/10.1109/INDIN51400.2023.10217913.","van":"Tebbe J, Pawlik T, Trilling-Haasler M, Löbner J, Lange-Hegermann M, Schneider J. Holistic optimization of a dynamic cross-flow filtration process towards a cyber-physical system. Jasperneite J, Wisniewski L, Fung Man K, Institute of Electrical and Electronics Engineers , editors. 2023 IEEE 21st International Conference on Industrial Informatics (INDIN). [Piscataway, NJ]: IEEE; 2023.","ufg":"Tebbe, Jörn u. a.: Holistic optimization of a dynamic cross-flow filtration process towards a cyber-physical system, hg. von Jasperneite, Jürgen u. a., [Piscataway, NJ] 2023.","mla":"Tebbe, Jörn, et al. “Holistic Optimization of a Dynamic Cross-Flow Filtration Process towards a Cyber-Physical System.” 2023 IEEE 21st International Conference on Industrial Informatics (INDIN), edited by Jürgen Jasperneite et al., IEEE, 2023, pp. 1–7, https://doi.org/10.1109/INDIN51400.2023.10217913.","havard":"J. Tebbe, T. Pawlik, M. Trilling-Haasler, J. Löbner, M. Lange-Hegermann, J. Schneider, Holistic optimization of a dynamic cross-flow filtration process towards a cyber-physical system, IEEE, [Piscataway, NJ], 2023.","bjps":"Tebbe J et al. (2023) Holistic Optimization of a Dynamic Cross-Flow Filtration Process towards a Cyber-Physical System, Jasperneite J et al. (eds). [Piscataway, NJ]: IEEE.","ieee":"J. Tebbe, T. Pawlik, M. Trilling-Haasler, J. Löbner, M. Lange-Hegermann, and J. Schneider, Holistic optimization of a dynamic cross-flow filtration process towards a cyber-physical system. [Piscataway, NJ]: IEEE, 2023, pp. 1–7. doi: 10.1109/INDIN51400.2023.10217913.","ama":"Tebbe J, Pawlik T, Trilling-Haasler M, Löbner J, Lange-Hegermann M, Schneider J. Holistic Optimization of a Dynamic Cross-Flow Filtration Process towards a Cyber-Physical System. (Jasperneite J, Wisniewski L, Fung Man K, Institute of Electrical and Electronics Engineers , eds.). IEEE; 2023:1-7. doi:10.1109/INDIN51400.2023.10217913"},"title":"Holistic optimization of a dynamic cross-flow filtration process towards a cyber-physical system","page":"1-7","status":"public","author":[{"first_name":"Jörn","id":"79072","last_name":"Tebbe","full_name":"Tebbe, Jörn"},{"full_name":"Pawlik, Thomas","id":"58915","last_name":"Pawlik","first_name":"Thomas"},{"first_name":"Marc","full_name":"Trilling-Haasler, Marc","last_name":"Trilling-Haasler","id":"81622","orcid":"0000-0002-3685-6383"},{"id":"74097","first_name":"Jannis","full_name":"Löbner, Jannis","last_name":"Löbner"},{"first_name":"Markus","id":"71761","full_name":"Lange-Hegermann, Markus","last_name":"Lange-Hegermann"},{"orcid":"0000-0001-6401-8873","last_name":"Schneider","first_name":"Jan","full_name":"Schneider, Jan","id":"13209"}],"year":"2023","user_id":"83781","type":"conference_editor_article","place":"[Piscataway, NJ]","doi":"10.1109/INDIN51400.2023.10217913","_id":"10787","publication_status":"published","publisher":"IEEE","department":[{"_id":"DEP4018"},{"_id":"DEP1308"},{"_id":"DEP4028"}],"conference":{"start_date":"2023-07-17","end_date":"2023-07-20","name":"21st International Conference on Industrial Informatics ; INDIN 2023","location":"Lemgo"},"abstract":[{"text":"Cyber-physical production systems have emerged with the rise of Industry 4.0 in different industrial fields. Especially the food sector, where inhomogeneous input products like beer/yeast suspensions with different qualities and properties have yet slowed down automation, has potential for this evolution. This contribution presents optimization methods for a dynamical cross-flow filtration plant which is driven by an advanced control concept in combination with data driven product monitoring via inline near infrared spectroscopy (NIR) in order to improve energy savings and filtration performance. Using a hierarchical control and optimization structure, the non stationary batch process is steered towards a high production rate with low energy consumption for a variety of different input products.","lang":"eng"}]},{"publisher":" OmniaScience","quality_controlled":"1","department":[{"_id":"DEP7020"},{"_id":"DEP1305"}],"abstract":[{"lang":"eng","text":"Purpose: Industry 4.0 technologies influence how production is planned, scheduled, and controlled. In literature, different classifications of the tasks and functions of production planning and control (PPC) exist, of which one is the German Aachen PPC model. This research aims to identify and classify current Industry 4.0 approaches for planning and controlling production processes and to reveal researched and unexplored areas of the model.\r\n\r\nDesign/methodology/approach: In an exploratory literature review, we review and classify 48 publications on a full-text basis with the Aachen PPC model's tasks and functions. Two cluster analyses reveal researched and unexplored tasks and functions of the Aachen PPC model. Additionally, we give a summary of each reviewed publication.\r\n\r\nFindings: We propose a cyber-physical PPC architecture, which incorporates current Industry 4.0 technologies, current optimization methods, optimization objectives, and disturbances relevant for realizing a PPC system in a smart factory. Current approaches focus on the in-house PPC, particularly on the control using real-time information from the shop floor. We propose future research directions for the unexplored tasks and functions of the Aachen PPC model.\r\n\r\nResearch limitations/implications: The selection of search terms and the texts' interpretation is based on an individual assessment. The revelation of unexplored tasks and functions of the Aachen PPC model might have a different outcome if the search term combination is parameterized differently.\r\n\r\nOriginality/value: Using the Aachen PPC model, which holistically models PPC, the findings give comprehensive insights into the current advances of tools, methods, and challenges relevant to planning and controlling production processes under Industry 4.0."}],"issue":"1","publication_status":"published","place":"Barcelona","_id":"7147","article_number":"4-30","doi":"http://dx.doi.org/10.3926/jiem.3582","user_id":"83781","intvolume":" 15","type":"scientific_journal_article","status":"public","author":[{"first_name":"Jan-Phillip","last_name":"Herrmann","full_name":"Herrmann, Jan-Phillip","id":"75846"},{"first_name":"Sven","last_name":"Tackenberg","full_name":"Tackenberg, Sven","id":"71470"},{"first_name":"Elio","last_name":"Padoano","full_name":"Padoano, Elio"},{"id":"71451","full_name":"Gamber, Thilo","first_name":"Thilo","last_name":"Gamber"}],"year":"2022","main_file_link":[{"open_access":"1","url":"http://www.jiem.org/index.php/jiem/article/view/3582/996"}],"citation":{"ieee":"J.-P. Herrmann, S. Tackenberg, E. Padoano, and T. Gamber, “Approaches of production planning and control under industry 4.0: A literature review,” Journal of Industrial Engineering and Management, vol. 15, no. 1, Art. no. 4–30, 2022, doi: http://dx.doi.org/10.3926/jiem.3582.","ama":"Herrmann JP, Tackenberg S, Padoano E, Gamber T. Approaches of production planning and control under industry 4.0: A literature review. Journal of Industrial Engineering and Management. 2022;15(1). doi:http://dx.doi.org/10.3926/jiem.3582","short":"J.-P. Herrmann, S. Tackenberg, E. Padoano, T. Gamber, Journal of Industrial Engineering and Management 15 (2022).","din1505-2-1":"Herrmann, Jan-Phillip ; Tackenberg, Sven ; Padoano, Elio ; Gamber, Thilo: Approaches of production planning and control under industry 4.0: A literature review. In: Journal of Industrial Engineering and Management Bd. 15. Barcelona, OmniaScience (2022), Nr. 1","chicago-de":"Herrmann, Jan-Phillip, Sven Tackenberg, Elio Padoano und Thilo Gamber. 2022. Approaches of production planning and control under industry 4.0: A literature review. Journal of Industrial Engineering and Management 15, Nr. 1. doi:http://dx.doi.org/10.3926/jiem.3582, .","apa":"Herrmann, J.-P., Tackenberg, S., Padoano, E., & Gamber, T. (2022). Approaches of production planning and control under industry 4.0: A literature review. Journal of Industrial Engineering and Management, 15(1), Article 4–30. http://dx.doi.org/10.3926/jiem.3582","chicago":"Herrmann, Jan-Phillip, Sven Tackenberg, Elio Padoano, and Thilo Gamber. “Approaches of Production Planning and Control under Industry 4.0: A Literature Review.” Journal of Industrial Engineering and Management 15, no. 1 (2022). http://dx.doi.org/10.3926/jiem.3582.","van":"Herrmann JP, Tackenberg S, Padoano E, Gamber T. Approaches of production planning and control under industry 4.0: A literature review. Journal of Industrial Engineering and Management. 2022;15(1).","havard":"J.-P. Herrmann, S. Tackenberg, E. Padoano, T. Gamber, Approaches of production planning and control under industry 4.0: A literature review, Journal of Industrial Engineering and Management. 15 (2022).","bjps":"Herrmann J-P et al. (2022) Approaches of Production Planning and Control under Industry 4.0: A Literature Review. Journal of Industrial Engineering and Management 15.","mla":"Herrmann, Jan-Phillip, et al. “Approaches of Production Planning and Control under Industry 4.0: A Literature Review.” Journal of Industrial Engineering and Management, vol. 15, no. 1, 4–30, 2022, http://dx.doi.org/10.3926/jiem.3582.","ufg":"Herrmann, Jan-Phillip u. a.: Approaches of production planning and control under industry 4.0: A literature review, in: Journal of Industrial Engineering and Management 15 (2022), H. 1."},"volume":15,"title":"Approaches of production planning and control under industry 4.0: A literature review","keyword":["Production planning and control","Industry 4.0","Industrial Internet of Things","Exploratory literature review"],"language":[{"iso":"eng"}],"oa":"1","date_updated":"2024-08-05T08:46:11Z","publication":"Journal of Industrial Engineering and Management","publication_identifier":{"eissn":["2013-0953"],"issn":["2013-8423"]},"date_created":"2022-03-22T10:01:45Z"},{"place":"Piscataway, NJ","keyword":["Renewable energy sources","Power demand","Process control","Voltage","Robustness","Planning","Stakeholders"],"language":[{"iso":"eng"}],"_id":"8437","doi":"10.1109/CEECT53198.2021.9672633","publication_identifier":{"isbn":["978-1-6654-4042-4"],"eisbn":["978-1-6654-4041-7"]},"date_created":"2022-07-06T08:55:01Z","type":"conference_editor","user_id":"83781","date_updated":"2024-08-07T09:37:05Z","editor":[{"last_name":"Schaab","full_name":"Schaab, Darian","first_name":"Darian"},{"id":"43516","first_name":"Patrick","full_name":"Spanier, Patrick","last_name":"Spanier"},{"first_name":"Martin ","last_name":"Ehlich ","full_name":"Ehlich , Martin "},{"full_name":"Fosselmann, Eric ","first_name":"Eric ","last_name":"Fosselmann"}],"year":"2022","department":[{"_id":"DEP6020"},{"_id":"DEP5018"}],"conference":{"end_date":"2021-12-18","start_date":"2021-12-16","name":"3rd International Conference on Electrical Engineering and Control Technologies (CEECT)","location":" Macau, Macao "},"abstract":[{"lang":"eng","text":"Low voltage direct current microgrids (DC-MG) provide a solution for increased efficiency by the reduction of conversion losses, total reuse of recuperation energy and an increased share of local power generation. Especially industrial applications ask for high uptimes and a stable voltage supply, which are both at stake in a power grid dominated by renewable generation. DC-MGs overcome these drawbacks by balancing energy distribution and power demand locally. For the planning and design of these grids a systemic approach is needed, due to the fact that many components are interacting. The task arises of structuring the knowledge available for individual technologies in an overall design framework. For this purpose, current state-of-the-art design processes are discussed in this article. These processes are mapped into the context of the requirements in an industrial environment. The findings are transferred to the design of industrial DC networks. Finally, a complete design process for DC-MGs is derived, which is proposed as a basis for the development of tools."}],"status":"public","publisher":"IEEE","quality_controlled":"1","series_title":"2021 3rd International Conference on Electrical Engineering and Control Technologies (CEECT)","title":"Design Framework for Multiple Infeed DC-Microgrids in Industrial Applications","citation":{"short":"D. Schaab, P. Spanier, M. Ehlich , E. Fosselmann, eds., Design Framework for Multiple Infeed DC-Microgrids in Industrial Applications, IEEE, Piscataway, NJ, 2022.","chicago-de":"Schaab, Darian, Patrick Spanier, Martin Ehlich und Eric Fosselmann, Hrsg. 2022. Design Framework for Multiple Infeed DC-Microgrids in Industrial Applications. 2021 3rd International Conference on Electrical Engineering and Control Technologies (CEECT). Piscataway, NJ: IEEE. doi:10.1109/CEECT53198.2021.9672633, .","din1505-2-1":"Schaab, D. ; Spanier, P. ; Ehlich , M. ; Fosselmann, E. (Hrsg.): Design Framework for Multiple Infeed DC-Microgrids in Industrial Applications, 2021 3rd International Conference on Electrical Engineering and Control Technologies (CEECT). Piscataway, NJ : IEEE, 2022","apa":"Schaab, D., Spanier, P., Ehlich , M., & Fosselmann, E. (Eds.). (2022). Design Framework for Multiple Infeed DC-Microgrids in Industrial Applications. IEEE. https://doi.org/10.1109/CEECT53198.2021.9672633","chicago":"Schaab, Darian, Patrick Spanier, Martin Ehlich , and Eric Fosselmann, eds. Design Framework for Multiple Infeed DC-Microgrids in Industrial Applications. 2021 3rd International Conference on Electrical Engineering and Control Technologies (CEECT). Piscataway, NJ: IEEE, 2022. https://doi.org/10.1109/CEECT53198.2021.9672633.","van":"Schaab D, Spanier P, Ehlich M, Fosselmann E, editors. Design Framework for Multiple Infeed DC-Microgrids in Industrial Applications. Piscataway, NJ: IEEE; 2022. (2021 3rd International Conference on Electrical Engineering and Control Technologies (CEECT)).","bjps":"Schaab D et al. (eds) (2022) Design Framework for Multiple Infeed DC-Microgrids in Industrial Applications. Piscataway, NJ: IEEE.","havard":"D. Schaab, P. Spanier, M. Ehlich , E. Fosselmann, eds., Design Framework for Multiple Infeed DC-Microgrids in Industrial Applications, IEEE, Piscataway, NJ, 2022.","mla":"Schaab, Darian, et al., editors. Design Framework for Multiple Infeed DC-Microgrids in Industrial Applications. IEEE, 2022, https://doi.org/10.1109/CEECT53198.2021.9672633.","ufg":"Schaab, Darian u. a.: Design Framework for Multiple Infeed DC-Microgrids in Industrial Applications, Piscataway, NJ 2022 (2021 3rd International Conference on Electrical Engineering and Control Technologies (CEECT)).","ieee":"D. Schaab, P. Spanier, M. Ehlich , and E. Fosselmann, Eds., Design Framework for Multiple Infeed DC-Microgrids in Industrial Applications. Piscataway, NJ: IEEE, 2022. doi: 10.1109/CEECT53198.2021.9672633.","ama":"Schaab D, Spanier P, Ehlich M, Fosselmann E, eds. Design Framework for Multiple Infeed DC-Microgrids in Industrial Applications. IEEE; 2022. doi:10.1109/CEECT53198.2021.9672633"},"publication_status":"published"},{"page":"1-18","status":"public","author":[{"first_name":"Jessica","last_name":"Rubart","id":"45672","full_name":"Rubart, Jessica"},{"first_name":"Valentin","last_name":"Grimm","full_name":"Grimm, Valentin","id":"74000"},{"last_name":"Potthast","full_name":"Potthast, Jonas","id":"81287","first_name":"Jonas"}],"year":"2022","citation":{"short":"J. Rubart, V. Grimm, J. Potthast, Journal Future Internet 14 (2022) 1–18.","chicago-de":"Rubart, Jessica, Valentin Grimm und Jonas Potthast. 2022. Augmenting Industrial Control Rooms with Multimodal Collaborative Interaction Techniques. Journal Future Internet 14, Nr. 8: 1–18. doi:https://doi.org/10.3390/fi14080224, .","din1505-2-1":"Rubart, Jessica ; Grimm, Valentin ; Potthast, Jonas: Augmenting Industrial Control Rooms with Multimodal Collaborative Interaction Techniques. In: Journal Future Internet Bd. 14. Basel, CH, MDPI (2022), Nr. 8, S. 1–18","van":"Rubart J, Grimm V, Potthast J. Augmenting Industrial Control Rooms with Multimodal Collaborative Interaction Techniques. Journal Future Internet. 2022;14(8):1–18.","ufg":"Rubart, Jessica/Grimm, Valentin/Potthast, Jonas: Augmenting Industrial Control Rooms with Multimodal Collaborative Interaction Techniques, in: Journal Future Internet 14 (2022), H. 8, S. 1–18.","mla":"Rubart, Jessica, et al. “Augmenting Industrial Control Rooms with Multimodal Collaborative Interaction Techniques.” Journal Future Internet, vol. 14, no. 8, 2022, pp. 1–18, https://doi.org/10.3390/fi14080224.","havard":"J. Rubart, V. Grimm, J. Potthast, Augmenting Industrial Control Rooms with Multimodal Collaborative Interaction Techniques, Journal Future Internet. 14 (2022) 1–18.","bjps":"Rubart J, Grimm V and Potthast J (2022) Augmenting Industrial Control Rooms with Multimodal Collaborative Interaction Techniques. Journal Future Internet 14, 1–18.","apa":"Rubart, J., Grimm, V., & Potthast, J. (2022). Augmenting Industrial Control Rooms with Multimodal Collaborative Interaction Techniques. Journal Future Internet, 14(8), 1–18. https://doi.org/10.3390/fi14080224","chicago":"Rubart, Jessica, Valentin Grimm, and Jonas Potthast. “Augmenting Industrial Control Rooms with Multimodal Collaborative Interaction Techniques.” Journal Future Internet 14, no. 8 (2022): 1–18. https://doi.org/10.3390/fi14080224.","ama":"Rubart J, Grimm V, Potthast J. Augmenting Industrial Control Rooms with Multimodal Collaborative Interaction Techniques. Journal Future Internet. 2022;14(8):1-18. doi:https://doi.org/10.3390/fi14080224","ieee":"J. Rubart, V. Grimm, and J. Potthast, “Augmenting Industrial Control Rooms with Multimodal Collaborative Interaction Techniques,” Journal Future Internet, vol. 14, no. 8, pp. 1–18, 2022, doi: https://doi.org/10.3390/fi14080224."},"volume":14,"title":"Augmenting Industrial Control Rooms with Multimodal Collaborative Interaction Techniques","language":[{"iso":"eng"}],"keyword":["control room","multimodel interaction","augmented reality","mixed reality"],"date_updated":"2024-08-02T09:11:24Z","date_created":"2022-11-08T15:57:56Z","publication":"Journal Future Internet","publication_identifier":{"eissn":["1999-5903 "]},"quality_controlled":"1","publisher":"MDPI","department":[{"_id":"DEP8008"},{"_id":"DEP8000"}],"issue":"8","abstract":[{"text":"The German manufacturing industry has been carrying out new developments towards the next industrial revolution, focusing on smart manufacturing environments. Our work emphasizes human-centered control rooms in the context of production plants. Increased automation does not have to come with less human control. Therefore, we report on multimodal collaborative interaction techniques to augment industrial control rooms. In particular, we include mobile workers who use the control room while being in the production hall using tablets or specifically mixed reality glasses. Collaborative annotation dashboards support discussions and a shared understanding among analysts. Manufacturing-related data can be integrated into business analytics environments so that holistic analyses can be performed. Multimodal interaction techniques can support effective interaction with the control room based on the users’ preferences. Immersive experience through mixed reality-based three-dimensional visualizations and interaction possibilities support users in obtaining a clear understanding of the underlying data.","lang":"eng"}],"article_type":"original","publication_status":"published","place":"Basel, CH","doi":"https://doi.org/10.3390/fi14080224","_id":"9162","user_id":"83781","intvolume":" 14","type":"scientific_journal_article"},{"date_updated":"2025-06-26T13:28:21Z","corporate_editor":[" IEEE ICMLA ","Institute of Electrical and Electronics Engineers"],"editor":[{"last_name":"Wani","first_name":"M. Arif ","full_name":"Wani, M. Arif "},{"last_name":"Sethi","first_name":"Ishwar ","full_name":"Sethi, Ishwar "},{"full_name":" Shi, Weisong","first_name":"Weisong","last_name":" Shi"},{"first_name":"Guangzhi ","full_name":"Qu, Guangzhi ","last_name":"Qu"},{"full_name":"Stan Raicu, Daniela ","last_name":"Stan Raicu","first_name":"Daniela "},{"last_name":"Jin","full_name":"Jin, Ruoming ","first_name":"Ruoming "}],"publication_identifier":{"isbn":["978-1-6654-4337-1"]},"publication":"20th IEEE International Conference on Machine Learning and Applications (ICMLA)","date_created":"2025-04-17T08:45:40Z","keyword":["deep reinforcement learning","traffic signal control","intelligent transportation system","traffic simulation"],"language":[{"iso":"eng"}],"citation":{"bjps":"Müller A et al. (2022) Towards Real-World Deployment of Reinforcement Learning for Traffic Signal Control, Wani MA et al. (eds). [Piscataway, NJ]: IEEE.","havard":"A. Müller, V. Rangras, T. Ferfers, F. Hufen, L. Schreckenberg, J. Jasperneite, G. Schnittker, M. Waldmann, M. Friesen, M. Wiering, Towards Real-World Deployment of Reinforcement Learning for Traffic Signal Control, IEEE, [Piscataway, NJ], 2022.","mla":"Müller, Arthur, et al. “Towards Real-World Deployment of Reinforcement Learning for Traffic Signal Control.” 20th IEEE International Conference on Machine Learning and Applications (ICMLA), edited by M. Arif Wani et al., IEEE, 2022, pp. 507–14, https://doi.org/10.1109/icmla52953.2021.00085.","ufg":"Müller, Arthur u. a.: Towards Real-World Deployment of Reinforcement Learning for Traffic Signal Control, hg. von Wani, M. Arif u. a., [Piscataway, NJ] 2022.","van":"Müller A, Rangras V, Ferfers T, Hufen F, Schreckenberg L, Jasperneite J, et al. Towards Real-World Deployment of Reinforcement Learning for Traffic Signal Control. Wani MA, Sethi I, Shi W, Qu G, Stan Raicu D, Jin R, et al., editors. 20th IEEE International Conference on Machine Learning and Applications (ICMLA). [Piscataway, NJ]: IEEE; 2022.","chicago":"Müller, Arthur, Vishal Rangras, Tobias Ferfers, Florian Hufen, Lukas Schreckenberg, Jürgen Jasperneite, Georg Schnittker, Michael Waldmann, Maxim Friesen, and Marco Wiering. Towards Real-World Deployment of Reinforcement Learning for Traffic Signal Control. Edited by M. Arif Wani, Ishwar Sethi, Weisong Shi, Guangzhi Qu, Daniela Stan Raicu, Ruoming Jin, IEEE ICMLA , and Institute of Electrical and Electronics Engineers. 20th IEEE International Conference on Machine Learning and Applications (ICMLA). [Piscataway, NJ]: IEEE, 2022. https://doi.org/10.1109/icmla52953.2021.00085.","apa":"Müller, A., Rangras, V., Ferfers, T., Hufen, F., Schreckenberg, L., Jasperneite, J., Schnittker, G., Waldmann, M., Friesen, M., & Wiering, M. (2022). Towards Real-World Deployment of Reinforcement Learning for Traffic Signal Control. In M. A. Wani, I. Sethi, W. Shi, G. Qu, D. Stan Raicu, R. Jin, IEEE ICMLA , & Institute of Electrical and Electronics Engineers (Eds.), 20th IEEE International Conference on Machine Learning and Applications (ICMLA) (pp. 507–514). IEEE. https://doi.org/10.1109/icmla52953.2021.00085","din1505-2-1":"Müller, Arthur ; Rangras, Vishal ; Ferfers, Tobias ; Hufen, Florian ; Schreckenberg, Lukas ; Jasperneite, Jürgen ; Schnittker, Georg ; Waldmann, Michael ; u. a. ; Wani, M. A. ; Sethi, I. ; Shi, W. ; Qu, G. ; Stan Raicu, D. ; Jin, R. ; IEEE ICMLA ; Institute of Electrical and Electronics Engineers (Hrsg.): Towards Real-World Deployment of Reinforcement Learning for Traffic Signal Control. [Piscataway, NJ] : IEEE, 2022","chicago-de":"Müller, Arthur, Vishal Rangras, Tobias Ferfers, Florian Hufen, Lukas Schreckenberg, Jürgen Jasperneite, Georg Schnittker, Michael Waldmann, Maxim Friesen und Marco Wiering. 2022. Towards Real-World Deployment of Reinforcement Learning for Traffic Signal Control. Hg. von M. Arif Wani, Ishwar Sethi, Weisong Shi, Guangzhi Qu, Daniela Stan Raicu, Ruoming Jin, IEEE ICMLA , und Institute of Electrical and Electronics Engineers. 20th IEEE International Conference on Machine Learning and Applications (ICMLA). [Piscataway, NJ]: IEEE. doi:10.1109/icmla52953.2021.00085, .","short":"A. Müller, V. Rangras, T. Ferfers, F. Hufen, L. Schreckenberg, J. Jasperneite, G. Schnittker, M. Waldmann, M. Friesen, M. Wiering, Towards Real-World Deployment of Reinforcement Learning for Traffic Signal Control, IEEE, [Piscataway, NJ], 2022.","ama":"Müller A, Rangras V, Ferfers T, et al. Towards Real-World Deployment of Reinforcement Learning for Traffic Signal Control. (Wani MA, Sethi I, Shi W, et al., eds.). IEEE; 2022:507-514. doi:10.1109/icmla52953.2021.00085","ieee":"A. Müller et al., Towards Real-World Deployment of Reinforcement Learning for Traffic Signal Control. [Piscataway, NJ]: IEEE, 2022, pp. 507–514. doi: 10.1109/icmla52953.2021.00085."},"title":"Towards Real-World Deployment of Reinforcement Learning for Traffic Signal Control","status":"public","page":"507-514","author":[{"full_name":"Müller, Arthur","last_name":"Müller","first_name":"Arthur"},{"id":"76044","first_name":"Vishal","last_name":"Rangras","full_name":"Rangras, Vishal"},{"last_name":"Ferfers","first_name":"Tobias","full_name":"Ferfers, Tobias"},{"full_name":"Hufen, Florian","last_name":"Hufen","first_name":"Florian"},{"full_name":"Schreckenberg, Lukas","first_name":"Lukas","last_name":"Schreckenberg"},{"first_name":"Jürgen","full_name":"Jasperneite, Jürgen","last_name":"Jasperneite","id":"1899"},{"full_name":"Schnittker, Georg","first_name":"Georg","last_name":"Schnittker"},{"full_name":"Waldmann, Michael","last_name":"Waldmann","first_name":"Michael"},{"full_name":"Friesen, Maxim","id":"61517","first_name":"Maxim","last_name":"Friesen"},{"last_name":"Wiering","full_name":"Wiering, Marco","first_name":"Marco"}],"year":"2022","user_id":"83781","type":"conference_editor_article","place":"[Piscataway, NJ]","_id":"12817","doi":"10.1109/icmla52953.2021.00085","publication_status":"published","publisher":"IEEE","department":[{"_id":"DEP5023"}],"conference":{"location":"Online","name":"20th IEEE International Conference on Machine Learning and Applications (ICMLA)","start_date":"2021-12-13","end_date":"2021-12-16"},"abstract":[{"text":"Sub-optimal control policies in intersection traffic signal controllers (TSC) contribute to congestion and lead to negative effects on human health and the environment. Reinforcement learning (RL) for traffic signal control is a promising approach to design better control policies and has attracted considerable research interest in recent years. However, most work done in this area used simplified simulation environments of traffic scenarios to train RL-based TSC. To deploy RL in real-world traffic systems, the gap between simplified simulation environments and real-world applications has to be closed. Therefore, we propose LemgoRL, a benchmark tool to train RL agents as TSC in a realistic simulation environment of Lemgo, a medium-sized town in Germany. In addition to the realistic simulation model, LemgoRL encompasses a traffic signal logic unit that ensures compliance with all regulatory and safety requirements. LemgoRL offers the same interface as the well-known OpenAI gym toolkit to enable easy deployment in existing research work. To demonstrate the functionality and applicability of LemgoRL, we train a state-of-the-art Deep RL algorithm on a CPU cluster utilizing a framework for distributed and parallel RL and compare its performance with other methods. Our benchmark tool drives the development of RL algorithms towards real-world applications.","lang":"eng"}]},{"keyword":["Industrielle Kommunikationstechnik","Industrielle Bildverarbeitung","Network reliability and redundancy methods","Networked Control Systems","Wireless real-time communication","Open Access"],"language":[{"iso":"ger"}],"publication_identifier":{"issn":["2522-8579"],"eisbn":["978-3-662-64283-2"],"eissn":["2522-8587"],"isbn":["978-3-662-64282-5"]},"date_created":"2025-05-12T08:22:49Z","date_updated":"2025-05-12T08:27:40Z","editor":[{"id":"1899","first_name":"Jürgen","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen"},{"last_name":"Lohweg","id":"1804","full_name":"Lohweg, Volker","first_name":"Volker","orcid":"0000-0002-3325-7887"}],"year":"2022","status":"public","page":"329","title":"Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2020","citation":{"ama":"Jasperneite J, Lohweg V, eds. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2020. Vol 14. Springer Berlin Heidelberg; 2022. doi:10.1007/978-3-662-64283-2","ieee":"J. Jasperneite and V. Lohweg, Eds., Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2020, vol. 14. Berlin, Heidelberg: Springer Berlin Heidelberg, 2022. doi: 10.1007/978-3-662-64283-2.","short":"J. Jasperneite, V. Lohweg, eds., Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2020, Springer Berlin Heidelberg, Berlin, Heidelberg, 2022.","din1505-2-1":"Jasperneite, J. ; Lohweg, V. (Hrsg.): Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2020, Technologien für die intelligente Automation. Bd. 14. Berlin, Heidelberg : Springer Berlin Heidelberg, 2022","chicago-de":"Jasperneite, Jürgen und Volker Lohweg, Hrsg. 2022. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2020. Bd. 14. Technologien für die intelligente Automation. Berlin, Heidelberg: Springer Berlin Heidelberg. doi:10.1007/978-3-662-64283-2, .","van":"Jasperneite J, Lohweg V, editors. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2020. Berlin, Heidelberg: Springer Berlin Heidelberg; 2022. 329 p. (Technologien für die intelligente Automation; vol. 14).","bjps":"Jasperneite J and Lohweg V (eds) (2022) Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2020. Berlin, Heidelberg: Springer Berlin Heidelberg.","mla":"Jasperneite, Jürgen, and Volker Lohweg, editors. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2020. Springer Berlin Heidelberg, 2022, https://doi.org/10.1007/978-3-662-64283-2.","havard":"J. Jasperneite, V. Lohweg, eds., Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2020, Springer Berlin Heidelberg, Berlin, Heidelberg, 2022.","ufg":"Jasperneite, Jürgen/Lohweg, Volker: Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2020, Bd. 14, Berlin, Heidelberg 2022 (Technologien für die intelligente Automation).","apa":"Jasperneite, J., & Lohweg, V. (Eds.). (2022). Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2020 (Vol. 14). Springer Berlin Heidelberg. https://doi.org/10.1007/978-3-662-64283-2","chicago":"Jasperneite, Jürgen, and Volker Lohweg, eds. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2020. Vol. 14. Technologien für die intelligente Automation. Berlin, Heidelberg: Springer Berlin Heidelberg, 2022. https://doi.org/10.1007/978-3-662-64283-2."},"volume":14,"place":"Berlin, Heidelberg","_id":"12907","doi":"10.1007/978-3-662-64283-2","type":"book_editor","user_id":"83781","intvolume":" 14","conference":{"name":"11. Jahreskolloquiums \"Kommunikation in der Automation\" (KommA 2020) / 7. Jahreskolloquiums \"Bildverarbeitung in der Automation\" (BVAu 2020)","location":"Lemgo","end_date":"2020-10-29","start_date":"2020-10-28"},"department":[{"_id":"DEP5023"}],"abstract":[{"text":"In diesem Open Access-Tagungsband sind die besten Beiträge des 11. Jahreskolloquiums \"Kommunikation in der Automation\" (KommA 2020) und des 7. Jahreskolloquiums \"Bildverarbeitung in der Automation\" (BVAu 2020) enthalten. Die Kolloquien fanden am 28. und 29. Oktober 2020 statt und wurden erstmalig als digitale Webveranstaltung auf dem Innovation Campus Lemgo organisiert.\r\nDie vorgestellten neuesten Forschungsergebnisse auf den Gebieten der industriellen Kommunikationstechnik und Bildverarbeitung erweitern den aktuellen Stand der Forschung und Technik. Die in den Beiträgen enthaltenen anschauliche Anwendungsbeispiele aus dem Bereich der Automation setzen die Ergebnisse in den direkten Anwendungsbezug.","lang":"eng"}],"publisher":"Springer Berlin Heidelberg","series_title":"Technologien für die intelligente Automation","publication_status":"published"},{"type":"journal_article","user_id":"83781","intvolume":" 29","_id":"6839","doi":"10.1177/09670335211057233","isi":"1","publication_status":"published","department":[{"_id":"DEP5023"},{"_id":"DEP4028"}],"abstract":[{"text":"Pasteurization is a crucial processing method in the food industry to ensure the safety of consumables. A major part of contemporary pasteurization processes involves using flash pasteurizer systems, where liquids are pumped through a pipe system to heat them for a predefined time. Accurately monitoring the amount of heat treatment applied to a product is challenging. This monitoring helps ensure that the correct heat impact (expressed in pasteurization units) is applied, which is commonly calculated as a product of time and temperature, taking achievability of the inactivation of the microorganisms into account. The state-of-the-art method involves a calculation of the applied pasteurization units using a one-point temperature measurement and the holding time for this temperature. Concerns about accuracy lead to high safety margins, reducing the quality of the pasteurized product. In this study, the applied pasteurization level was estimated using regression models trained with NIR spectroscopy data collected while pasteurizing fruit juices of different types and brands. Several conventional regression models were trained in combination with different preprocessing methods, including a novel prediction outlier detection method. Generalized juice models trained with the concatenated data of all types of juices demonstrated cross-validated scores of RMSECV ∼2.78 ± 0.09 and r2 0.96 ± 0.01, while separate juice models displayed averaged cross-validated scores of RMSECV ∼1.56 ± 0.04 and r2 0.98 ± 0.01. Thus, the model accuracy ±10–30 % is well within the standard safety margins. ","lang":"eng"}],"issue":"6","publisher":"Sage Publishing","publication_identifier":{"eissn":["1751-6552"],"issn":["0967-0335"]},"publication":"Journal of Near Infrared Spectroscopy","date_created":"2021-11-30T12:39:27Z","date_updated":"2025-06-26T13:35:56Z","keyword":["Beverage pasteurization","heat impact control","prediction outlier elimination"],"language":[{"iso":"eng"}],"title":"Heat impact control in flash pasteurization by estimation of applied pasteurization units using near infrared spectroscopy","volume":29,"citation":{"havard":"B.G. Sürmeli, I. Weishaupt, K. Schwarzer, N. Moriz, J. Schneider, Heat impact control in flash pasteurization by estimation of applied pasteurization units using near infrared spectroscopy, Journal of Near Infrared Spectroscopy. 29 (2021) 339–351.","bjps":"Sürmeli BG et al. (2021) Heat Impact Control in Flash Pasteurization by Estimation of Applied Pasteurization Units Using near Infrared Spectroscopy. Journal of Near Infrared Spectroscopy 29, 339–351.","mla":"Sürmeli, Baris Gün, et al. “Heat Impact Control in Flash Pasteurization by Estimation of Applied Pasteurization Units Using near Infrared Spectroscopy.” Journal of Near Infrared Spectroscopy, vol. 29, no. 6, 2021, pp. 339–51, https://doi.org/10.1177/09670335211057233.","ufg":"Sürmeli, Baris Gün u. a.: Heat impact control in flash pasteurization by estimation of applied pasteurization units using near infrared spectroscopy, in: Journal of Near Infrared Spectroscopy 29 (2021), H. 6, S. 339–351.","ama":"Sürmeli BG, Weishaupt I, Schwarzer K, Moriz N, Schneider J. Heat impact control in flash pasteurization by estimation of applied pasteurization units using near infrared spectroscopy. Journal of Near Infrared Spectroscopy. 2021;29(6):339-351. doi:10.1177/09670335211057233","van":"Sürmeli BG, Weishaupt I, Schwarzer K, Moriz N, Schneider J. Heat impact control in flash pasteurization by estimation of applied pasteurization units using near infrared spectroscopy. Journal of Near Infrared Spectroscopy. 2021;29(6):339–51.","chicago":"Sürmeli, Baris Gün, Imke Weishaupt, Knut Schwarzer, Natalia Moriz, and Jan Schneider. “Heat Impact Control in Flash Pasteurization by Estimation of Applied Pasteurization Units Using near Infrared Spectroscopy.” Journal of Near Infrared Spectroscopy 29, no. 6 (2021): 339–51. https://doi.org/10.1177/09670335211057233.","ieee":"B. G. Sürmeli, I. Weishaupt, K. Schwarzer, N. Moriz, and J. Schneider, “Heat impact control in flash pasteurization by estimation of applied pasteurization units using near infrared spectroscopy,” Journal of Near Infrared Spectroscopy, vol. 29, no. 6, pp. 339–351, 2021, doi: 10.1177/09670335211057233.","apa":"Sürmeli, B. G., Weishaupt, I., Schwarzer, K., Moriz, N., & Schneider, J. (2021). Heat impact control in flash pasteurization by estimation of applied pasteurization units using near infrared spectroscopy. Journal of Near Infrared Spectroscopy, 29(6), 339–351. https://doi.org/10.1177/09670335211057233","din1505-2-1":"Sürmeli, Baris Gün ; Weishaupt, Imke ; Schwarzer, Knut ; Moriz, Natalia ; Schneider, Jan: Heat impact control in flash pasteurization by estimation of applied pasteurization units using near infrared spectroscopy. In: Journal of Near Infrared Spectroscopy Bd. 29, Sage Publishing (2021), Nr. 6, S. 339–351","chicago-de":"Sürmeli, Baris Gün, Imke Weishaupt, Knut Schwarzer, Natalia Moriz und Jan Schneider. 2021. Heat impact control in flash pasteurization by estimation of applied pasteurization units using near infrared spectroscopy. Journal of Near Infrared Spectroscopy 29, Nr. 6: 339–351. doi:10.1177/09670335211057233, .","short":"B.G. Sürmeli, I. Weishaupt, K. Schwarzer, N. Moriz, J. Schneider, Journal of Near Infrared Spectroscopy 29 (2021) 339–351."},"year":"2021","author":[{"first_name":"Baris Gün","last_name":"Sürmeli","full_name":"Sürmeli, Baris Gün","id":"73806"},{"full_name":"Weishaupt, Imke","id":"58425","first_name":"Imke","last_name":"Weishaupt"},{"id":"13329","first_name":"Knut","full_name":"Schwarzer, Knut","last_name":"Schwarzer"},{"first_name":"Natalia","id":"44238","full_name":"Moriz, Natalia","last_name":"Moriz"},{"orcid":"0000-0001-6401-8873","last_name":"Schneider","first_name":"Jan","full_name":"Schneider, Jan","id":"13209"}],"external_id":{"isi":["000726007200001"]},"status":"public","page":"339-351"},{"publication_status":"published","abstract":[{"lang":"eng","text":"Industry 4.0 technologies influence how production is planned, scheduled, and controlled. In literature, different classifications of the tasks and functions of production planning and control (PPC) exist, of which one is the German Aachen PPC model. This paper conducts an exploratory literature review by reviewing 48 publications on a full-text basis. Based on the review, a cyber-physical PPC architecture is proposed, which incorporates current Industry 4.0 technologies, current optimisation methods, optimisation objectives, and disturbances, relevant for the realisation of a PPC system in a smart factory. A classification scheme is developed as a basis for two cluster analyses that reveal researched and unexplored tasks and functions of the Aachen PPC model. Current approaches focus on the in-house PPC, particularly on the control using real-time information from the shop floor. Future research directions are proposed for the unexplored tasks and functions of the Aachen PPC model."}],"department":[{"_id":"DEP7020"},{"_id":"DEP1305"}],"publisher":"Elsevier","type":"journal_article","intvolume":" 180","user_id":"83781","_id":"7033","doi":"10.1016/j.procs.2021.01.158","title":"A literature review and cluster analysis of the Aachen production planning and control model under Industry 4.0","volume":180,"citation":{"ama":"Herrmann JP, Tackenberg S, Padoano E, Gamber T. A literature review and cluster analysis of the Aachen production planning and control model under Industry 4.0. Procedia Computer Science. 2021;180:208-218. doi:10.1016/j.procs.2021.01.158","ieee":"J.-P. Herrmann, S. Tackenberg, E. Padoano, and T. Gamber, “A literature review and cluster analysis of the Aachen production planning and control model under Industry 4.0,” Procedia Computer Science, vol. 180, pp. 208–218, 2021, doi: 10.1016/j.procs.2021.01.158.","din1505-2-1":"Herrmann, Jan-Phillip ; Tackenberg, Sven ; Padoano, Elio ; Gamber, Thilo: A literature review and cluster analysis of the Aachen production planning and control model under Industry 4.0. In: Procedia Computer Science Bd. 180, Elsevier (2021), S. 208–218","chicago-de":"Herrmann, Jan-Phillip, Sven Tackenberg, Elio Padoano und Thilo Gamber. 2021. A literature review and cluster analysis of the Aachen production planning and control model under Industry 4.0. Procedia Computer Science 180: 208–218. doi:10.1016/j.procs.2021.01.158, .","short":"J.-P. Herrmann, S. Tackenberg, E. Padoano, T. Gamber, Procedia Computer Science 180 (2021) 208–218.","ufg":"Herrmann, Jan-Phillip u. a.: A literature review and cluster analysis of the Aachen production planning and control model under Industry 4.0, in: Procedia Computer Science 180 (2021), S. 208–218.","havard":"J.-P. Herrmann, S. Tackenberg, E. Padoano, T. Gamber, A literature review and cluster analysis of the Aachen production planning and control model under Industry 4.0, Procedia Computer Science. 180 (2021) 208–218.","mla":"Herrmann, Jan-Phillip, et al. “A Literature Review and Cluster Analysis of the Aachen Production Planning and Control Model under Industry 4.0.” Procedia Computer Science, vol. 180, 2021, pp. 208–18, https://doi.org/10.1016/j.procs.2021.01.158.","bjps":"Herrmann J-P et al. (2021) A Literature Review and Cluster Analysis of the Aachen Production Planning and Control Model under Industry 4.0. Procedia Computer Science 180, 208–218.","van":"Herrmann JP, Tackenberg S, Padoano E, Gamber T. A literature review and cluster analysis of the Aachen production planning and control model under Industry 4.0. Procedia Computer Science. 2021;180:208–18.","chicago":"Herrmann, Jan-Phillip, Sven Tackenberg, Elio Padoano, and Thilo Gamber. “A Literature Review and Cluster Analysis of the Aachen Production Planning and Control Model under Industry 4.0.” Procedia Computer Science 180 (2021): 208–18. https://doi.org/10.1016/j.procs.2021.01.158.","apa":"Herrmann, J.-P., Tackenberg, S., Padoano, E., & Gamber, T. (2021). A literature review and cluster analysis of the Aachen production planning and control model under Industry 4.0. Procedia Computer Science, 180, 208–218. https://doi.org/10.1016/j.procs.2021.01.158"},"year":"2021","author":[{"full_name":"Herrmann, Jan-Phillip","first_name":"Jan-Phillip","last_name":"Herrmann","id":"75846"},{"id":"71470","full_name":"Tackenberg, Sven","last_name":"Tackenberg","first_name":"Sven"},{"first_name":"Elio","full_name":"Padoano, Elio","last_name":"Padoano"},{"id":"71451","last_name":"Gamber","full_name":"Gamber, Thilo","first_name":"Thilo"}],"status":"public","page":"208-218","publication":"Procedia Computer Science","publication_identifier":{"issn":["1877-0509"]},"date_created":"2022-02-08T14:43:59Z","date_updated":"2024-08-05T08:48:34Z","keyword":["Production planning","control","Industry 4.0","Industrial Internet of Things","Exploratory literature review"],"language":[{"iso":"eng"}]},{"date_updated":"2025-06-26T08:58:30Z","publication_identifier":{"eissn":["2624-862X "]},"publication":"Dairy","date_created":"2022-05-05T12:51:45Z","keyword":["bovine colostrum","bacteria","pathogens","probiotic bacteria","cost-effective processing","heat treatment","pasteurization","contamination control","immunoglobulins","enzymes"],"language":[{"iso":"eng"}],"volume":2,"citation":{"apa":"Fasse, S., Alarinta, J., Frahm, B., & Wirtanen, G. (2021). Bovine Colostrum for Human Consumption - Improving Microbial Quality and Maintaining Bioactive Characteristics through Processing. Dairy, 2(4), 556–575. https://doi.org/10.3390/dairy2040044","chicago":"Fasse, Sylvia, Jarmo Alarinta, Björn Frahm, and Gun Wirtanen. “Bovine Colostrum for Human Consumption - Improving Microbial Quality and Maintaining Bioactive Characteristics through Processing.” Dairy 2, no. 4 (2021): 556–75. https://doi.org/10.3390/dairy2040044.","van":"Fasse S, Alarinta J, Frahm B, Wirtanen G. Bovine Colostrum for Human Consumption - Improving Microbial Quality and Maintaining Bioactive Characteristics through Processing. Dairy. 2021;2(4):556–75.","mla":"Fasse, Sylvia, et al. “Bovine Colostrum for Human Consumption - Improving Microbial Quality and Maintaining Bioactive Characteristics through Processing.” Dairy, vol. 2, no. 4, 2021, pp. 556–75, https://doi.org/10.3390/dairy2040044.","havard":"S. Fasse, J. Alarinta, B. Frahm, G. Wirtanen, Bovine Colostrum for Human Consumption - Improving Microbial Quality and Maintaining Bioactive Characteristics through Processing, Dairy. 2 (2021) 556–575.","bjps":"Fasse S et al. (2021) Bovine Colostrum for Human Consumption - Improving Microbial Quality and Maintaining Bioactive Characteristics through Processing. Dairy 2, 556–575.","ufg":"Fasse, Sylvia u. a.: Bovine Colostrum for Human Consumption - Improving Microbial Quality and Maintaining Bioactive Characteristics through Processing, in: Dairy 2 (2021), H. 4, S. 556–575.","short":"S. Fasse, J. Alarinta, B. Frahm, G. Wirtanen, Dairy 2 (2021) 556–575.","din1505-2-1":"Fasse, Sylvia ; Alarinta, Jarmo ; Frahm, Björn ; Wirtanen, Gun: Bovine Colostrum for Human Consumption - Improving Microbial Quality and Maintaining Bioactive Characteristics through Processing. In: Dairy Bd. 2. Basel, MDPI (2021), Nr. 4, S. 556–575","chicago-de":"Fasse, Sylvia, Jarmo Alarinta, Björn Frahm und Gun Wirtanen. 2021. Bovine Colostrum for Human Consumption - Improving Microbial Quality and Maintaining Bioactive Characteristics through Processing. Dairy 2, Nr. 4: 556–575. doi:10.3390/dairy2040044, .","ieee":"S. Fasse, J. Alarinta, B. Frahm, and G. Wirtanen, “Bovine Colostrum for Human Consumption - Improving Microbial Quality and Maintaining Bioactive Characteristics through Processing,” Dairy, vol. 2, no. 4, pp. 556–575, 2021, doi: 10.3390/dairy2040044.","ama":"Fasse S, Alarinta J, Frahm B, Wirtanen G. Bovine Colostrum for Human Consumption - Improving Microbial Quality and Maintaining Bioactive Characteristics through Processing. Dairy. 2021;2(4):556-575. doi:10.3390/dairy2040044"},"title":"Bovine Colostrum for Human Consumption - Improving Microbial Quality and Maintaining Bioactive Characteristics through Processing","status":"public","page":"556-575","external_id":{"isi":["001178458700001"]},"author":[{"first_name":"Sylvia","full_name":"Fasse, Sylvia","last_name":"Fasse"},{"last_name":"Alarinta","full_name":"Alarinta, Jarmo","first_name":"Jarmo"},{"first_name":"Björn","full_name":"Frahm, Björn","id":"45666","last_name":"Frahm"},{"last_name":"Wirtanen","first_name":"Gun","full_name":"Wirtanen, Gun"}],"year":"2021","intvolume":" 2","user_id":"83781","type":"scientific_journal_article","_id":"7981","doi":"10.3390/dairy2040044","place":"Basel","publication_status":"published","isi":"1","publisher":"MDPI","quality_controlled":"1","abstract":[{"text":"The main purpose of bovine colostrum, being the milk secreted by a cow after giving birth, is to transfer passive immunity to the calf. The calves have an immature immune system as they lack immunoglobulins (Igs). Subsequently, the supply of good quality bovine colostrum is required. The quality of colostrum is classified by low bacterial counts and adequate Ig concentrations. Bacterial contamination can contain a variety of human pathogens or high counts of spoilage bacteria, which has become more challenging with the emerging use of bovine colostrum as food and food supplements. There is also a growing risk for the spread of zoonotic diseases originating from bovines. For this reason, processing based on heat treatment or other feasible techniques is required. This review provides an overview of literature on the microbial quality of bovine colostrum and processing methods to improve its microbial quality and keep its nutritional values as food. The highlights of this review are as follows: high quality colostrum is a valuable raw material in food products and supplements; the microbial safety of bovine colostrum is increased using an appropriate processing-suitable effective heat treatment which does not destroy the high nutrition value of colostrum; the heat treatment processes are cost-effective compared to other methods; and heat treatment can be performed in both small- and large-scale production.","lang":"eng"}],"issue":"4","department":[{"_id":"DEP4021"}]},{"language":[{"iso":"eng"}],"keyword":["deep reinforcement learning","traffic signal control","intelligent transportation system","traffic simulation"],"date_created":"2024-07-30T05:54:40Z","publication":"20th IEEE International Conference on Machine Learning and Applications (ICMLA)","publication_identifier":{"eisbn":["9781665443371"]},"editor":[{"first_name":"M. Arif","full_name":"Wani, M. Arif","last_name":"Wani"}],"corporate_editor":[" IEEE ICMLA"," Institute of Electrical and Electronics Engineers"],"date_updated":"2024-07-30T07:45:47Z","external_id":{"arxiv":["arXiv:2103.16223"]},"author":[{"last_name":"Müller","first_name":"Arthur","full_name":"Müller, Arthur"},{"first_name":"Vishal","full_name":"Rangras, Vishal","id":"76044","last_name":"Rangras"},{"full_name":"Schnittker, Georg","first_name":"Georg","last_name":"Schnittker"},{"first_name":"Michael","last_name":"Waldmann","full_name":"Waldmann, Michael"},{"full_name":"Friesen, Maxim","id":"61517","last_name":"Friesen","first_name":"Maxim"},{"full_name":"Ferfers, Tobias","first_name":"Tobias","last_name":"Ferfers"},{"full_name":"Schreckenberg, Lukas","first_name":"Lukas","last_name":"Schreckenberg"},{"last_name":"Hufen","full_name":"Hufen, Florian","first_name":"Florian"},{"full_name":"Jasperneite, Jürgen","id":"1899","last_name":"Jasperneite","first_name":"Jürgen"},{"full_name":"Wiering, Marco","first_name":"Marco","last_name":"Wiering"}],"year":"2021","status":"public","title":"Towards Real-World Deployment of Reinforcement Learning for Traffic Signal Control","citation":{"din1505-2-1":"Müller, Arthur ; Rangras, Vishal ; Schnittker, Georg ; Waldmann, Michael ; Friesen, Maxim ; Ferfers, Tobias ; Schreckenberg, Lukas ; Hufen, Florian ; u. a. ; Wani, M. A. ; IEEE ICMLA ; Institute of Electrical and Electronics Engineers (Hrsg.): Towards Real-World Deployment of Reinforcement Learning for Traffic Signal Control. Piscataway, NJ : IEEE, 2021","chicago-de":"Müller, Arthur, Vishal Rangras, Georg Schnittker, Michael Waldmann, Maxim Friesen, Tobias Ferfers, Lukas Schreckenberg, Florian Hufen, Jürgen Jasperneite und Marco Wiering. 2021. Towards Real-World Deployment of Reinforcement Learning for Traffic Signal Control. Hg. von M. Arif Wani, IEEE ICMLA, und Institute of Electrical and Electronics Engineers. 20th IEEE International Conference on Machine Learning and Applications (ICMLA). Piscataway, NJ: IEEE. doi:10.1109/ICMLA52953.2021.00085, .","short":"A. Müller, V. Rangras, G. Schnittker, M. Waldmann, M. Friesen, T. Ferfers, L. Schreckenberg, F. Hufen, J. Jasperneite, M. Wiering, Towards Real-World Deployment of Reinforcement Learning for Traffic Signal Control, IEEE, Piscataway, NJ, 2021.","chicago":"Müller, Arthur, Vishal Rangras, Georg Schnittker, Michael Waldmann, Maxim Friesen, Tobias Ferfers, Lukas Schreckenberg, Florian Hufen, Jürgen Jasperneite, and Marco Wiering. Towards Real-World Deployment of Reinforcement Learning for Traffic Signal Control. Edited by M. Arif Wani, IEEE ICMLA, and Institute of Electrical and Electronics Engineers. 20th IEEE International Conference on Machine Learning and Applications (ICMLA). Piscataway, NJ: IEEE, 2021. https://doi.org/10.1109/ICMLA52953.2021.00085.","apa":"Müller, A., Rangras, V., Schnittker, G., Waldmann, M., Friesen, M., Ferfers, T., Schreckenberg, L., Hufen, F., Jasperneite, J., & Wiering, M. (2021). Towards Real-World Deployment of Reinforcement Learning for Traffic Signal Control. In M. A. Wani, IEEE ICMLA, & Institute of Electrical and Electronics Engineers (Eds.), 20th IEEE International Conference on Machine Learning and Applications (ICMLA). IEEE. https://doi.org/10.1109/ICMLA52953.2021.00085","ufg":"Müller, Arthur u. a.: Towards Real-World Deployment of Reinforcement Learning for Traffic Signal Control, hg. von Wani, M. Arif/ IEEE ICMLA, Institute of Electrical and Electronics Engineers, Piscataway, NJ 2021.","bjps":"Müller A et al. (2021) Towards Real-World Deployment of Reinforcement Learning for Traffic Signal Control, Wani MA, IEEE ICMLA, and Institute of Electrical and Electronics Engineers (eds). Piscataway, NJ: IEEE.","havard":"A. Müller, V. Rangras, G. Schnittker, M. Waldmann, M. Friesen, T. Ferfers, L. Schreckenberg, F. Hufen, J. Jasperneite, M. Wiering, Towards Real-World Deployment of Reinforcement Learning for Traffic Signal Control, IEEE, Piscataway, NJ, 2021.","mla":"Müller, Arthur, et al. “Towards Real-World Deployment of Reinforcement Learning for Traffic Signal Control.” 20th IEEE International Conference on Machine Learning and Applications (ICMLA), edited by M. Arif Wani et al., IEEE, 2021, https://doi.org/10.1109/ICMLA52953.2021.00085.","van":"Müller A, Rangras V, Schnittker G, Waldmann M, Friesen M, Ferfers T, et al. Towards Real-World Deployment of Reinforcement Learning for Traffic Signal Control. Wani MA, IEEE ICMLA, Institute of Electrical and Electronics Engineers, editors. 20th IEEE International Conference on Machine Learning and Applications (ICMLA). Piscataway, NJ: IEEE; 2021.","ieee":"A. Müller et al., Towards Real-World Deployment of Reinforcement Learning for Traffic Signal Control. Piscataway, NJ: IEEE, 2021. doi: 10.1109/ICMLA52953.2021.00085.","ama":"Müller A, Rangras V, Schnittker G, et al. Towards Real-World Deployment of Reinforcement Learning for Traffic Signal Control. (Wani MA, IEEE ICMLA, Institute of Electrical and Electronics Engineers, eds.). IEEE; 2021. doi:10.1109/ICMLA52953.2021.00085"},"doi":"10.1109/ICMLA52953.2021.00085","_id":"11803","place":"Piscataway, NJ","type":"conference_editor_article","user_id":"83781","abstract":[{"lang":"eng","text":"Sub-optimal control policies in intersection traffic signal controllers (TSC) contribute to congestion and lead to negative effects on human health and the environment. Reinforcement learning (RL) for traffic signal control is a promising approach to design better control policies and has attracted considerable research interest in recent years. However, most work done in this area used simplified simulation environments of traffic scenarios to train RL-based TSC. To deploy RL in real-world traffic systems, the gap between simplified simulation environments and real-world applications has to be closed. Therefore, we propose LemgoRL, a benchmark tool to train RL agents as TSC in a realistic simulation environment of Lemgo, a medium-sized town in Germany. In addition to the realistic simulation model, LemgoRL encompasses a traffic signal logic unit that ensures compliance with all regulatory and safety requirements. LemgoRL offers the same interface as the well-known OpenAI gym toolkit to enable easy deployment in existing research work. To demonstrate the functionality and applicability of LemgoRL, we train a state-of-the-art Deep RL algorithm on a CPU cluster utilizing a framework for distributed and parallel RL and compare its performance with other methods. Our benchmark tool drives the development of RL algorithms towards real-world applications."}],"department":[{"_id":"DEP5000"},{"_id":"DEP5019"},{"_id":"DEP5020"},{"_id":"DEP6020"}],"conference":{"end_date":"2021-12-16","start_date":"2021-12-13","name":"20th IEEE International Conference on Machine Learning and Applications (ICMLA)","location":"Pasadena, CA, USA "},"publisher":"IEEE","publication_status":"published"},{"keyword":["Vehicle dynamics","Control moment gyroscope","Control system analysis","Roll stabilization","Monorail vehicles"],"language":[{"iso":"eng"}],"_id":"8380","doi":"10.1109/IECON48115.2021.9589726","user_id":"56955","date_updated":"2023-03-15T13:50:15Z","publication_identifier":{"issn":["2577-1647 "],"isbn":["978-1-6654-3554-3"]},"publication":"IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society","type":"conference_editor_article","date_created":"2022-06-22T08:45:19Z","status":"public","page":"pp. 1-6","publisher":"IEEE","author":[{"last_name":"Griese","first_name":"Martin","id":"52308","full_name":"Griese, Martin"},{"full_name":"Kottmeier, Fabian","id":"55385","first_name":"Fabian","last_name":"Kottmeier"},{"id":"46242","last_name":"Schulte","full_name":"Schulte, Thomas","first_name":"Thomas"}],"year":2021,"conference":{"name":"IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society","location":"Toronto, ON, Canada ","end_date":"2021-10-16","start_date":"2021-10-13"},"department":[{"_id":"DEP6020"},{"_id":"DEP5022"}],"abstract":[{"lang":"eng","text":"Currently, numerous single-track railway lines are disused due to economic reasons. However, they could be reactivated for a bidirectional on-demand service traffic by small vehicles that use only one rail. MonoCabs are such small cabin-like vehicles, stabilized by a system of control moment gyroscopes and a moveable mass. They could make an important contribution to improve the mobility offer especially in rural areas. This paper is focused on the vertical stabilization system of the MonoCab. This system is discussed based on a physical three body model which describes the rolling motion of the vehicle, the lateral motion of the mass and the precession motion of the gyroscope. The model is utilized for a cascaded control concept adjusting the vehicle’s roll angle and gyroscope’s gimbal angle. The proposed stabilization concept is capable of compensating both high dynamic disturbances and stationary disturbances (e. g. unbalanced loads and steady wind flows). The concept is analyzed by simulations and experimental investigations utilizing a small scaled test rig and a rapid control prototyping system. Beside transient command responses also the frequency response of the system is experimentally evaluated and used for a validation of the model and theoretical findings."}],"citation":{"short":"M. Griese, F. Kottmeier, T. Schulte, Vertical Control of a Self-Stabilizing Monorail Vehicle, IEEE, 2021.","chicago-de":"Griese, Martin, Fabian Kottmeier und Thomas Schulte. 2021. Vertical control of a self-stabilizing monorail vehicle. IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society. IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society. IEEE. doi:10.1109/IECON48115.2021.9589726, .","din1505-2-1":"Griese, Martin ; Kottmeier, Fabian ; Schulte, Thomas: Vertical control of a self-stabilizing monorail vehicle, IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society : IEEE, 2021","apa":"Griese, M., Kottmeier, F., & Schulte, T. (2021). Vertical control of a self-stabilizing monorail vehicle. IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society (pp. 1–6). Toronto, ON, Canada : IEEE. https://doi.org/10.1109/IECON48115.2021.9589726","ieee":"M. Griese, F. Kottmeier, and T. Schulte, Vertical control of a self-stabilizing monorail vehicle. IEEE, 2021, pp. 1–6.","chicago":"Griese, Martin, Fabian Kottmeier, and Thomas Schulte. Vertical Control of a Self-Stabilizing Monorail Vehicle. IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society. IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2021. https://doi.org/10.1109/IECON48115.2021.9589726.","van":"Griese M, Kottmeier F, Schulte T. Vertical control of a self-stabilizing monorail vehicle. IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society. IEEE; 2021. (IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society).","ama":"Griese M, Kottmeier F, Schulte T. Vertical Control of a Self-Stabilizing Monorail Vehicle. IEEE; 2021:1-6. doi:10.1109/IECON48115.2021.9589726","ufg":"Griese, Martin et. al. (2021): Vertical control of a self-stabilizing monorail vehicle (=IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society).","havard":"M. Griese, F. Kottmeier, T. Schulte, Vertical control of a self-stabilizing monorail vehicle, IEEE, 2021.","bjps":"Griese M, Kottmeier F and Schulte T (2021) Vertical Control of a Self-Stabilizing Monorail Vehicle. IEEE.","mla":"Griese, Martin, et al. “Vertical Control of a Self-Stabilizing Monorail Vehicle.” IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society, IEEE, 2021, pp. 1–6, doi:10.1109/IECON48115.2021.9589726."},"publication_status":"published","series_title":"IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society","title":"Vertical control of a self-stabilizing monorail vehicle"},{"type":"conference_editor_article","date_created":"2022-06-22T14:22:07Z","publication_identifier":{"eisbn":["978-1-6654-1073-1"]},"publication":"2021 9th International Conference on Control, Mechatronics and Automation (ICCMA)","date_updated":"2023-03-15T13:50:15Z","user_id":"56955","doi":"10.1109/ICCMA54375.2021.9646219","_id":"8385","language":[{"iso":"eng"}],"keyword":["Vehicle dynamics","Control moment gyroscope","Control system analysis","Roll stabilization","Monorail vehicles"],"title":"Modeling the Vertical Dynamics of a Self-stabilizing Monorail Vehicle","publication_status":"published","citation":{"chicago-de":"Griese, Martin, Seyed Davood Mousavi und Thomas Schulte. 2021. Modeling the Vertical Dynamics of a Self-stabilizing Monorail Vehicle. 2021 9th International Conference on Control, Mechatronics and Automation (ICCMA). IEEE. doi:10.1109/ICCMA54375.2021.9646219, .","din1505-2-1":"Griese, Martin ; Mousavi, Seyed Davood ; Schulte, Thomas: Modeling the Vertical Dynamics of a Self-stabilizing Monorail Vehicle : IEEE, 2021","short":"M. Griese, S.D. Mousavi, T. Schulte, Modeling the Vertical Dynamics of a Self-Stabilizing Monorail Vehicle, IEEE, 2021.","chicago":"Griese, Martin, Seyed Davood Mousavi, and Thomas Schulte. Modeling the Vertical Dynamics of a Self-Stabilizing Monorail Vehicle. 2021 9th International Conference on Control, Mechatronics and Automation (ICCMA). IEEE, 2021. https://doi.org/10.1109/ICCMA54375.2021.9646219.","apa":"Griese, M., Mousavi, S. D., & Schulte, T. (2021). Modeling the Vertical Dynamics of a Self-stabilizing Monorail Vehicle. 2021 9th International Conference on Control, Mechatronics and Automation (ICCMA) (pp. 205–210). Belval, Luxembourg : IEEE. https://doi.org/10.1109/ICCMA54375.2021.9646219","mla":"Griese, Martin, et al. “Modeling the Vertical Dynamics of a Self-Stabilizing Monorail Vehicle.” 2021 9th International Conference on Control, Mechatronics and Automation (ICCMA), IEEE, 2021, pp. 205–10, doi:10.1109/ICCMA54375.2021.9646219.","bjps":"Griese M, Mousavi SD and Schulte T (2021) Modeling the Vertical Dynamics of a Self-Stabilizing Monorail Vehicle. IEEE.","havard":"M. Griese, S.D. Mousavi, T. Schulte, Modeling the Vertical Dynamics of a Self-stabilizing Monorail Vehicle, IEEE, 2021.","ufg":"Griese, Martin et. al. (2021): Modeling the Vertical Dynamics of a Self-stabilizing Monorail Vehicle.","van":"Griese M, Mousavi SD, Schulte T. Modeling the Vertical Dynamics of a Self-stabilizing Monorail Vehicle. 2021 9th International Conference on Control, Mechatronics and Automation (ICCMA). IEEE; 2021.","ieee":"M. Griese, S. D. Mousavi, and T. Schulte, Modeling the Vertical Dynamics of a Self-stabilizing Monorail Vehicle. IEEE, 2021, pp. 205–210.","ama":"Griese M, Mousavi SD, Schulte T. Modeling the Vertical Dynamics of a Self-Stabilizing Monorail Vehicle. IEEE; 2021:205-210. doi:10.1109/ICCMA54375.2021.9646219"},"abstract":[{"lang":"eng","text":"Currently, numerous single-track railway lines are disused due to economic reasons. However, they could be reactivated for a bidirectional on-demand service traffic by small vehicles that use only one rail. MonoCabs are such small cabin-like vehicles, stabilized by a system of control moment gyroscopes and a moveable mass. They could make an important contribution to improve the mobility offer especially in rural areas. This paper focuses on the analytical modeling and vertical stabilization system of the MonoCab. A nonlinear dynamic model is obtained using the Lagrangian method and subsequently linearized about its equilibrium point. Which is used for the design of the cascade control system. The dynamic analysis of the system is accomplished by comparing between analytically derived model in simulink environment and same structured model in simscape multibody. This system is discussed based on a physical three body model which describes the rolling motion of the vehicle, the lateral motion of the mass and the precession motion of the gyroscope. The model is utilized for a cascaded control concept adjusting the vehicle’s roll angle and gyroscope’s precession angle. The proposed stabilization concept is capable of compensating both high dynamic disturbances and stationary disturbances (e. g. unbalanced loads and steady wind flows). The concept is analyzed by simulations and experimental investigations. Beside transient command responses also the frequency response of the system is experimentally evaluated and used for a validation of the model and theoretical findings. For the experimental validation, a small scaled test rig is used which consists of mechanical frames and flywheels, inverter-fed drives, rotary encoders, an inertial measurement unit (IMU) and a rapid control prototyping system."}],"conference":{"end_date":"2021-11-14","start_date":"2021-11-11","location":"Belval, Luxembourg ","name":"2021 9th International Conference on Control, Mechatronics and Automation (ICCMA)"},"department":[{"_id":"DEP6020"},{"_id":"DEP5022"}],"year":2021,"author":[{"full_name":"Griese, Martin","last_name":"Griese","id":"52308","first_name":"Martin"},{"first_name":"Seyed Davood","last_name":"Mousavi","id":"79148","full_name":"Mousavi, Seyed Davood"},{"id":"46242","last_name":"Schulte","full_name":"Schulte, Thomas","first_name":"Thomas"}],"publisher":"IEEE","page":"205-210","status":"public"},{"_id":"8386","doi":"10.1109/IECON48115.2021.9589449","keyword":["Acceleration feedback","emulation of mechanical loads","motion and servo control","machine and drive testing"],"language":[{"iso":"eng"}],"user_id":"56955","date_updated":"2023-03-15T13:50:15Z","publication_identifier":{"isbn":["978-1-6654-3554-3"],"issn":["2577-1647"]},"publication":"IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society","type":"conference_editor_article","date_created":"2022-06-22T14:29:18Z","publisher":"IEEE","status":"public","page":"1-6","abstract":[{"lang":"eng","text":"The dynamic emulation of mechanical loads is required in a variety of applications to test and validate control algorithms. Typical test setups consist of two mechanically coupled motors, one of which is the Device Under Test (DUT) while the other is used as a load drive for emulation. Existing emulation concepts either rely on the differentiation of velocity feedback or utilize measured quantities of the DUT. The emulation method proposed in this paper uses acceleration feedback to control the torque of the load drive. It does not require any measured quantities of the DUT which allows a simple replacement of the DUT’s motor and/or inverter without the need of any conceptual changes. Based on a physical model, the emulation method is derived analytically and analyzed numerically for the emulation of one-mass-systems. The stability and emulation quality is evaluated considering two controller architectures. Finally, experiments are conducted and compared to numeric simulations to test the correct emulation."}],"author":[{"full_name":"Epp, Michael","last_name":"Epp","first_name":"Michael"},{"full_name":"Griese, Martin","first_name":"Martin","last_name":"Griese","id":"52308"},{"id":"46242","last_name":"Schulte","full_name":"Schulte, Thomas","first_name":"Thomas"}],"year":2021,"department":[{"_id":"DEP6020"},{"_id":"DEP5022"}],"conference":{"start_date":"2021-10-13","end_date":"2021-10-16","location":"Toronto, ON, Canada ","name":"IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society"},"citation":{"ieee":"M. Epp, M. Griese, and T. Schulte, Acceleration Feedback Concepts for Dynamic Emulation of Mechanical Loads. IEEE, 2021, pp. 1–6.","ama":"Epp M, Griese M, Schulte T. Acceleration Feedback Concepts for Dynamic Emulation of Mechanical Loads. IEEE; 2021:1-6. doi:10.1109/IECON48115.2021.9589449","chicago":"Epp, Michael, Martin Griese, and Thomas Schulte. Acceleration Feedback Concepts for Dynamic Emulation of Mechanical Loads. IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2021. https://doi.org/10.1109/IECON48115.2021.9589449.","apa":"Epp, M., Griese, M., & Schulte, T. (2021). Acceleration Feedback Concepts for Dynamic Emulation of Mechanical Loads. IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society (pp. 1–6). Toronto, ON, Canada : IEEE. https://doi.org/10.1109/IECON48115.2021.9589449","havard":"M. Epp, M. Griese, T. Schulte, Acceleration Feedback Concepts for Dynamic Emulation of Mechanical Loads, IEEE, 2021.","mla":"Epp, Michael, et al. “Acceleration Feedback Concepts for Dynamic Emulation of Mechanical Loads.” IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society, IEEE, 2021, pp. 1–6, doi:10.1109/IECON48115.2021.9589449.","bjps":"Epp M, Griese M and Schulte T (2021) Acceleration Feedback Concepts for Dynamic Emulation of Mechanical Loads. IEEE.","ufg":"Epp, Michael et. al. (2021): Acceleration Feedback Concepts for Dynamic Emulation of Mechanical Loads.","van":"Epp M, Griese M, Schulte T. Acceleration Feedback Concepts for Dynamic Emulation of Mechanical Loads. IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society. IEEE; 2021.","chicago-de":"Epp, Michael, Martin Griese und Thomas Schulte. 2021. Acceleration Feedback Concepts for Dynamic Emulation of Mechanical Loads. IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society. IEEE. doi:10.1109/IECON48115.2021.9589449, .","din1505-2-1":"Epp, Michael ; Griese, Martin ; Schulte, Thomas: Acceleration Feedback Concepts for Dynamic Emulation of Mechanical Loads : IEEE, 2021","short":"M. Epp, M. Griese, T. Schulte, Acceleration Feedback Concepts for Dynamic Emulation of Mechanical Loads, IEEE, 2021."},"publication_status":"published","title":"Acceleration Feedback Concepts for Dynamic Emulation of Mechanical Loads"},{"keyword":["Additive manufacturing","quality control","process qualification","process control","screening design"],"language":[{"iso":"eng"}],"date_updated":"2025-06-26T07:56:42Z","publication":"International Journal of Computer Integrated Manufacturing","publication_identifier":{"eissn":["1362-3052"],"issn":["0951-192X"]},"date_created":"2025-04-15T08:18:06Z","status":"public","page":"556-567","external_id":{"isi":["000630944800001"]},"year":"2021","author":[{"last_name":"Huxol","id":"43559","full_name":"Huxol, Andrea","first_name":"Andrea"},{"last_name":"Villmer","id":"14290","full_name":"Villmer, Franz-Josef","first_name":"Franz-Josef"}],"citation":{"havard":"A. Huxol, F.-J. Villmer, Experimental approach towards parameter evaluation in laser powder bed fusion of metals, International Journal of Computer Integrated Manufacturing. 35 (2021) 556–567.","bjps":"Huxol A and Villmer F-J (2021) Experimental Approach towards Parameter Evaluation in Laser Powder Bed Fusion of Metals. International Journal of Computer Integrated Manufacturing 35, 556–567.","mla":"Huxol, Andrea, and Franz-Josef Villmer. “Experimental Approach towards Parameter Evaluation in Laser Powder Bed Fusion of Metals.” International Journal of Computer Integrated Manufacturing, vol. 35, no. 4–5, 2021, pp. 556–67, https://doi.org/10.1080/0951192x.2021.1901313.","ufg":"Huxol, Andrea/Villmer, Franz-Josef: Experimental approach towards parameter evaluation in laser powder bed fusion of metals, in: International Journal of Computer Integrated Manufacturing 35 (2021), H. 4–5, S. 556–567.","ama":"Huxol A, Villmer FJ. Experimental approach towards parameter evaluation in laser powder bed fusion of metals. International Journal of Computer Integrated Manufacturing. 2021;35(4-5):556-567. doi:10.1080/0951192x.2021.1901313","van":"Huxol A, Villmer FJ. Experimental approach towards parameter evaluation in laser powder bed fusion of metals. International Journal of Computer Integrated Manufacturing. 2021;35(4–5):556–67.","chicago":"Huxol, Andrea, and Franz-Josef Villmer. “Experimental Approach towards Parameter Evaluation in Laser Powder Bed Fusion of Metals.” International Journal of Computer Integrated Manufacturing 35, no. 4–5 (2021): 556–67. https://doi.org/10.1080/0951192x.2021.1901313.","ieee":"A. Huxol and F.-J. Villmer, “Experimental approach towards parameter evaluation in laser powder bed fusion of metals,” International Journal of Computer Integrated Manufacturing, vol. 35, no. 4–5, pp. 556–567, 2021, doi: 10.1080/0951192x.2021.1901313.","apa":"Huxol, A., & Villmer, F.-J. (2021). Experimental approach towards parameter evaluation in laser powder bed fusion of metals. International Journal of Computer Integrated Manufacturing, 35(4–5), 556–567. https://doi.org/10.1080/0951192x.2021.1901313","din1505-2-1":"Huxol, Andrea ; Villmer, Franz-Josef: Experimental approach towards parameter evaluation in laser powder bed fusion of metals. In: International Journal of Computer Integrated Manufacturing Bd. 35. London [u.a.], Taylor & Francis (2021), Nr. 4–5, S. 556–567","chicago-de":"Huxol, Andrea und Franz-Josef Villmer. 2021. Experimental approach towards parameter evaluation in laser powder bed fusion of metals. International Journal of Computer Integrated Manufacturing 35, Nr. 4–5: 556–567. doi:10.1080/0951192x.2021.1901313, .","short":"A. Huxol, F.-J. Villmer, International Journal of Computer Integrated Manufacturing 35 (2021) 556–567."},"volume":35,"title":"Experimental approach towards parameter evaluation in laser powder bed fusion of metals","_id":"12789","doi":"10.1080/0951192x.2021.1901313","place":"London [u.a.]","intvolume":" 35","user_id":"83781","type":"scientific_journal_article","publisher":"Taylor & Francis","abstract":[{"text":"Additive manufacturing is being increasingly focused on the production of end-use parts. Compared to the prototyping application, the production of end-use parts demands a higher level of repeatability and process quality. To achieve this, increased knowledge is required about the influence of various process parameters on the part characteristics and the parameter interrelations. Design of Experiment methods can be applied to gain knowledge on the process behavior, but the applicability of different DoE methods for AM processes has to be validated. This paper describes the application of a definitive screening design for the identification of influencing parameters in Laser Powder Bed Fusion of CoCrW alloy. The impact of various hatch parameters on the part porosity is analyzed. The experimental setup and results are described. The results are validated in an additional test series, comparing the part quality achieved by parameter-sets obtained by different optimization approaches. Furthermore, the correlation of the porosity towards mechanical properties is investigated. Finally, the opportunities and limitations of the method are discussed.","lang":"eng"}],"issue":"4-5","department":[{"_id":"DEP7000"}],"publication_status":"published","isi":"1"},{"page":"1927-1938","status":"public","external_id":{"isi":["000636136100001"]},"year":"2021","author":[{"first_name":"Filippo","last_name":"Simoni","full_name":"Simoni, Filippo"},{"first_name":"Andrea","last_name":"Huxol","full_name":"Huxol, Andrea","id":"43559"},{"last_name":"Villmer","full_name":"Villmer, Franz-Josef","id":"14290","first_name":"Franz-Josef"}],"volume":32,"citation":{"ama":"Simoni F, Huxol A, Villmer FJ. Improving surface quality in selective laser melting based tool making. Journal of Intelligent Manufacturing. 2021;32(7):1927-1938. doi:10.1007/s10845-021-01744-9","ieee":"F. Simoni, A. Huxol, and F.-J. Villmer, “Improving surface quality in selective laser melting based tool making,” Journal of Intelligent Manufacturing, vol. 32, no. 7, pp. 1927–1938, 2021, doi: 10.1007/s10845-021-01744-9.","chicago-de":"Simoni, Filippo, Andrea Huxol und Franz-Josef Villmer. 2021. Improving surface quality in selective laser melting based tool making. Journal of Intelligent Manufacturing 32, Nr. 7: 1927–1938. doi:10.1007/s10845-021-01744-9, .","din1505-2-1":"Simoni, Filippo ; Huxol, Andrea ; Villmer, Franz-Josef: Improving surface quality in selective laser melting based tool making. In: Journal of Intelligent Manufacturing Bd. 32. Dordrecht [u.a.], Springer Science and Business Media (2021), Nr. 7, S. 1927–1938","short":"F. Simoni, A. Huxol, F.-J. Villmer, Journal of Intelligent Manufacturing 32 (2021) 1927–1938.","ufg":"Simoni, Filippo/Huxol, Andrea/Villmer, Franz-Josef: Improving surface quality in selective laser melting based tool making, in: Journal of Intelligent Manufacturing 32 (2021), H. 7, S. 1927–1938.","mla":"Simoni, Filippo, et al. “Improving Surface Quality in Selective Laser Melting Based Tool Making.” Journal of Intelligent Manufacturing, vol. 32, no. 7, 2021, pp. 1927–38, https://doi.org/10.1007/s10845-021-01744-9.","bjps":"Simoni F, Huxol A and Villmer F-J (2021) Improving Surface Quality in Selective Laser Melting Based Tool Making. Journal of Intelligent Manufacturing 32, 1927–1938.","havard":"F. Simoni, A. Huxol, F.-J. Villmer, Improving surface quality in selective laser melting based tool making, Journal of Intelligent Manufacturing. 32 (2021) 1927–1938.","van":"Simoni F, Huxol A, Villmer FJ. Improving surface quality in selective laser melting based tool making. Journal of Intelligent Manufacturing. 2021;32(7):1927–38.","chicago":"Simoni, Filippo, Andrea Huxol, and Franz-Josef Villmer. “Improving Surface Quality in Selective Laser Melting Based Tool Making.” Journal of Intelligent Manufacturing 32, no. 7 (2021): 1927–38. https://doi.org/10.1007/s10845-021-01744-9.","apa":"Simoni, F., Huxol, A., & Villmer, F.-J. (2021). Improving surface quality in selective laser melting based tool making. Journal of Intelligent Manufacturing, 32(7), 1927–1938. https://doi.org/10.1007/s10845-021-01744-9"},"title":"Improving surface quality in selective laser melting based tool making","language":[{"iso":"eng"}],"keyword":["Direct rapid tooling","Toolmaking","Additive manufacturing process chain","Process control","Production systems","Selective laser melting","Surface roughness","Laser surface remelting"],"date_updated":"2025-06-26T13:41:37Z","date_created":"2025-04-15T09:17:22Z","publication":"Journal of Intelligent Manufacturing","publication_identifier":{"eissn":["1572-8145"],"issn":["0956-5515"]},"publisher":"Springer Science and Business Media","issue":"7","abstract":[{"text":"n the last years, Additive Manufacturing, thanks to its capability of continuous improvements in performance and cost-efficiency, was able to partly replace and redefine well-established manufacturing processes. This research is based on the idea to achieve great cost and operational benefits especially in the field of tool making for injection molding by combining traditional and additive manufacturing in one process chain. Special attention is given to the surface quality in terms of surface roughness and its optimization directly in the Selective Laser Melting process. This article presents the possibility for a remelting process of the SLM parts as a way to optimize the surfaces of the produced parts. The influence of laser remelting on the surface roughness of the parts is analyzed while varying machine parameters like laser power and scan settings. Laser remelting with optimized parameter settings considerably improves the surface quality of SLM parts and is a great starting point for further post-processing techniques, which require a low initial value of surface roughness.","lang":"eng"}],"department":[{"_id":"DEP7000"}],"publication_status":"published","isi":"1","doi":"10.1007/s10845-021-01744-9","_id":"12790","place":"Dordrecht [u.a.]","intvolume":" 32","user_id":"83781","type":"scientific_journal_article"},{"volume":254,"citation":{"apa":"Velte, P., Stawinoga, M., & Lueg, R. (2020). Carbon performance and disclosure: A systematic review of governance-related determinants and financial consequences. Journal of Cleaner Production, 254, Article 120063. https://doi.org/10.1016/j.jclepro.2020.120063","chicago":"Velte, Patrick, Martin Stawinoga, and Rainer Lueg. “Carbon Performance and Disclosure: A Systematic Review of Governance-Related Determinants and Financial Consequences.” Journal of Cleaner Production 254 (2020). https://doi.org/10.1016/j.jclepro.2020.120063.","van":"Velte P, Stawinoga M, Lueg R. Carbon performance and disclosure: A systematic review of governance-related determinants and financial consequences. Journal of Cleaner Production. 2020;254.","ufg":"Velte, Patrick/Stawinoga, Martin/Lueg, Rainer: Carbon performance and disclosure: A systematic review of governance-related determinants and financial consequences, in: Journal of Cleaner Production 254 (2020).","bjps":"Velte P, Stawinoga M and Lueg R (2020) Carbon Performance and Disclosure: A Systematic Review of Governance-Related Determinants and Financial Consequences. Journal of Cleaner Production 254.","mla":"Velte, Patrick, et al. “Carbon Performance and Disclosure: A Systematic Review of Governance-Related Determinants and Financial Consequences.” Journal of Cleaner Production, vol. 254, 120063, 2020, https://doi.org/10.1016/j.jclepro.2020.120063.","havard":"P. Velte, M. Stawinoga, R. Lueg, Carbon performance and disclosure: A systematic review of governance-related determinants and financial consequences, Journal of Cleaner Production. 254 (2020).","short":"P. Velte, M. Stawinoga, R. Lueg, Journal of Cleaner Production 254 (2020).","chicago-de":"Velte, Patrick, Martin Stawinoga und Rainer Lueg. 2020. Carbon performance and disclosure: A systematic review of governance-related determinants and financial consequences. Journal of Cleaner Production 254. doi:10.1016/j.jclepro.2020.120063, .","din1505-2-1":"Velte, Patrick ; Stawinoga, Martin ; Lueg, Rainer: Carbon performance and disclosure: A systematic review of governance-related determinants and financial consequences. In: Journal of Cleaner Production Bd. 254. Amsterdam [u.a.], Elsevier (2020)","ieee":"P. Velte, M. Stawinoga, and R. Lueg, “Carbon performance and disclosure: A systematic review of governance-related determinants and financial consequences,” Journal of Cleaner Production, vol. 254, Art. no. 120063, 2020, doi: 10.1016/j.jclepro.2020.120063.","ama":"Velte P, Stawinoga M, Lueg R. Carbon performance and disclosure: A systematic review of governance-related determinants and financial consequences. Journal of Cleaner Production. 2020;254. doi:10.1016/j.jclepro.2020.120063"},"title":"Carbon performance and disclosure: A systematic review of governance-related determinants and financial consequences","status":"public","jel":["M41"],"external_id":{"isi":["000518890800021"]},"year":"2020","author":[{"first_name":"Patrick","full_name":"Velte, Patrick","last_name":"Velte"},{"full_name":"Stawinoga, Martin","id":"68681","last_name":"Stawinoga","first_name":"Martin"},{"full_name":"Lueg, Rainer","last_name":"Lueg","first_name":"Rainer"}],"date_updated":"2025-06-26T13:27:09Z","publication":"Journal of Cleaner Production","publication_identifier":{"issn":["0959-6526"],"eissn":["1879-1786"]},"date_created":"2022-05-03T06:22:51Z","keyword":["Carbon performance","Carbon disclosure","Corporate governance","Management control","Financial performance","Legitimacy theory"],"language":[{"iso":"eng"}],"publication_status":"published","isi":"1","publisher":"Elsevier","quality_controlled":"1","abstract":[{"text":"The purpose of this paper is to convey a thorough understanding of the governance-related determinants and financial consequences of carbon performance and disclosure. Its motivation lies in the increasing global political, social, academic as well as practical importance of managing and reporting on carbon-related issues. Methodologically, we employ a systematic literature review. Thus, we identify 73 quantitative peer-reviewed empirical studies in this field and categorize them according to a legitimacy-theory-based framework. Our four main contributions offer new insights into this emerging research field and provide guidance for the development of new research models: First, we help future researchers to structure this emerging field of research with respect to the interactions of the phenomenon itself (carbon performance vs. disclosure), its determinants (country- and firm-related governance), and its financial consequences (value relevance, information asymmetry, financial performance, and cost of capital). Second, we provide a comprehensive overview of variables and proxies used in the studies and list their main statistical effects, which facilitates building novel models. There are indications that 1) board composition positively influences both carbon performance and disclosure, 2) carbon performance and carbon disclosure are positively connected, 3) carbon disclosure reduces information asymmetry, and 4) carbon performance increases financial performance. Third, we develop a research agenda with concise suggestions for future studies. Fourth, we argue that due to the under-theorization of concepts the comparability of included studies is challenging, this research field may be characterized as a vibrant field for extensive future research. (C) 2020 Elsevier Ltd. All rights reserved.","lang":"eng"}],"department":[{"_id":"DEP1507"}],"intvolume":" 254","user_id":"83781","type":"scientific_journal_article","_id":"7890","article_number":"120063","doi":"10.1016/j.jclepro.2020.120063","place":" Amsterdam [u.a.]"},{"editor":[{"first_name":"Jürgen","last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen"},{"orcid":"0000-0002-3325-7887","full_name":"Lohweg, Volker","first_name":"Volker","last_name":"Lohweg","id":"1804"}],"date_updated":"2025-05-12T08:07:26Z","publication_identifier":{"issn":["2522-8579"],"eisbn":["978-3-662-59895-5"],"eissn":["2522-8587"],"isbn":["978-3-662-59894-8"]},"date_created":"2021-02-02T13:12:47Z","keyword":["Industrielle Kommunikationstechnik Industrielle Bildverarbeitung Network reliability and redundancy methods Networked Control Systems Wireless real-time communication Open Access quality control","reliability","safety and risk"],"language":[{"iso":"ger"}],"oa":"1","volume":12,"citation":{"ieee":"J. Jasperneite and V. Lohweg, Eds., Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018, vol. 12. Berlin, Heidelberg: Springer Vieweg, 2020. doi: https://doi.org/10.1007/978-3-662-59895-5.","apa":"Jasperneite, J., & Lohweg, V. (Eds.). (2020). Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018 (Vol. 12). Springer Vieweg. https://doi.org/10.1007/978-3-662-59895-5","chicago":"Jasperneite, Jürgen, and Volker Lohweg, eds. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018. Vol. 12. Technologien für die intelligente Automation. Berlin, Heidelberg: Springer Vieweg, 2020. https://doi.org/10.1007/978-3-662-59895-5.","ama":"Jasperneite J, Lohweg V, eds. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018. Vol 12. Springer Vieweg; 2020. doi:https://doi.org/10.1007/978-3-662-59895-5","van":"Jasperneite J, Lohweg V, editors. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018. Berlin, Heidelberg: Springer Vieweg; 2020. 364 p. ( Technologien für die intelligente Automation; vol. 12).","havard":"J. Jasperneite, V. Lohweg, eds., Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018, Springer Vieweg, Berlin, Heidelberg, 2020.","mla":"Jasperneite, Jürgen, and Volker Lohweg, editors. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018. Springer Vieweg, 2020, https://doi.org/10.1007/978-3-662-59895-5.","bjps":"Jasperneite J and Lohweg V (eds) (2020) Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018. Berlin, Heidelberg: Springer Vieweg.","ufg":"Jasperneite, Jürgen/Lohweg, Volker: Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018, Bd. 12, Berlin, Heidelberg 2020 ( Technologien für die intelligente Automation).","short":"J. Jasperneite, V. Lohweg, eds., Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018, Springer Vieweg, Berlin, Heidelberg, 2020.","chicago-de":"Jasperneite, Jürgen und Volker Lohweg, Hrsg. 2020. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018. Bd. 12. Technologien für die intelligente Automation. Berlin, Heidelberg: Springer Vieweg. doi:https://doi.org/10.1007/978-3-662-59895-5, .","din1505-2-1":"Jasperneite, J. ; Lohweg, V. (Hrsg.): Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018, Technologien für die intelligente Automation. Bd. 12. Berlin, Heidelberg : Springer Vieweg, 2020"},"title":"Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018","status":"public","page":"364","year":"2020","main_file_link":[{"open_access":"1","url":"https://link.springer.com/book/10.1007/978-3-662-59895-5?page=2#about"}],"intvolume":" 12","user_id":"83781","type":"book_editor","_id":"4851","doi":"https://doi.org/10.1007/978-3-662-59895-5","place":"Berlin, Heidelberg","publication_status":"published","series_title":" Technologien für die intelligente Automation","publisher":"Springer Vieweg","abstract":[{"text":"In diesem Open-Access-Tagungsband sind die besten Beiträge des 9. Jahreskolloquiums \"Kommunikation in der Automation\" (KommA 2018) und des 6. Jahreskolloquiums \"Bildverarbeitung in der Automation\" (BVAu 2018) enthalten. Die Kolloquien fanden am 20. und 21. November 2018 in der SmartFactoryOWL, einer gemeinsamen Einrichtung des Fraunhofer IOSB-INA und der Technischen Hochschule Ostwestfalen-Lippe statt.\r\nDie vorgestellten neuesten Forschungsergebnisse auf den Gebieten der industriellen Kommunikationstechnik und Bildverarbeitung erweitern den aktuellen Stand der Forschung und Technik. Die in den Beiträgen enthaltenen anschaulichen Beispiele aus dem Bereich der Automation setzen die Ergebnisse in den direkten Anwendungsbezug.","lang":"ger"}],"conference":{"name":"9. Jahreskolloquiums \"Kommunikation in der Automation\" (KommA 2018) / 6. Jahreskolloquiums \"Bildverarbeitung in der Automation\" (BVAu 2018)","location":"Lemgo","end_date":"20218-11-21","start_date":"2018-11-20"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}]},{"department":[{"_id":"DEP7000"}],"conference":{"name":"13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS)","location":"Oshawa, CANADA","start_date":"2019-08-12","end_date":"2019-08-14"},"abstract":[{"lang":"eng","text":"Additive manufacturing is being increasingly focused on the production of end-use parts. Compared to the prototyping application, the production of end-use parts demands a higher level of repeatability and process quality. To achieve this, increased knowledge is required about the influence of various process parameters on the part characteristics and the parameter interrelations. Design of Experiment methods can be applied to gain knowledge on the process behavior, but the applicability of different DoE methods for AM processes has to be validated. This paper describes the application of a definitive screening design for the identification of influencing parameters in Selective Laser Melting. The experimental setup and results are described and opportunities and limitations of the method are discussed. (C) 2019, IFAC (International Federation of Automatic Control) Hosting by Elsevier Ltd. All rights reserved."}],"publisher":"Elsevier BV","series_title":"IFAC-PapersOnLine","publication_status":"published","place":"Amsterdam [u.a.]","_id":"12791","doi":"10.1016/j.ifacol.2019.10.041","type":"conference_editor_article","user_id":"83781","intvolume":" 52","year":"2019","author":[{"first_name":"Andrea","id":"43559","full_name":"Huxol, Andrea","last_name":"Huxol"},{"full_name":"Villmer, Franz-Josef","first_name":"Franz-Josef","id":"14290","last_name":"Villmer"}],"status":"public","page":"270-275","title":"DoE Methods for Parameter Evaluation in Selective Laser Melting","citation":{"chicago":"Huxol, Andrea, and Franz-Josef Villmer. DoE Methods for Parameter Evaluation in Selective Laser Melting. 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS). Vol. 52. IFAC-PapersOnLine. Amsterdam [u.a.]: Elsevier BV, 2019. https://doi.org/10.1016/j.ifacol.2019.10.041.","ieee":"A. Huxol and F.-J. Villmer, DoE Methods for Parameter Evaluation in Selective Laser Melting, vol. 52. Amsterdam [u.a.]: Elsevier BV, 2019, pp. 270–275. doi: 10.1016/j.ifacol.2019.10.041.","apa":"Huxol, A., & Villmer, F.-J. (2019). DoE Methods for Parameter Evaluation in Selective Laser Melting. In 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS) (Vol. 52, pp. 270–275). Elsevier BV. https://doi.org/10.1016/j.ifacol.2019.10.041","havard":"A. Huxol, F.-J. Villmer, DoE Methods for Parameter Evaluation in Selective Laser Melting, Elsevier BV, Amsterdam [u.a.], 2019.","bjps":"Huxol A and Villmer F-J (2019) DoE Methods for Parameter Evaluation in Selective Laser Melting. Amsterdam [u.a.]: Elsevier BV.","mla":"Huxol, Andrea, and Franz-Josef Villmer. “DoE Methods for Parameter Evaluation in Selective Laser Melting.” 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS), vol. 52, Elsevier BV, 2019, pp. 270–75, https://doi.org/10.1016/j.ifacol.2019.10.041.","ufg":"Huxol, Andrea/Villmer, Franz-Josef: DoE Methods for Parameter Evaluation in Selective Laser Melting, Bd. 52, Amsterdam [u.a.] 2019 (IFAC-PapersOnLine).","ama":"Huxol A, Villmer FJ. DoE Methods for Parameter Evaluation in Selective Laser Melting. Vol 52. Elsevier BV; 2019:270-275. doi:10.1016/j.ifacol.2019.10.041","van":"Huxol A, Villmer FJ. DoE Methods for Parameter Evaluation in Selective Laser Melting. 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS). Amsterdam [u.a.]: Elsevier BV; 2019. (IFAC-PapersOnLine; vol. 52).","din1505-2-1":"Huxol, Andrea ; Villmer, Franz-Josef: DoE Methods for Parameter Evaluation in Selective Laser Melting, IFAC-PapersOnLine. Bd. 52. Amsterdam [u.a.] : Elsevier BV, 2019","chicago-de":"Huxol, Andrea und Franz-Josef Villmer. 2019. DoE Methods for Parameter Evaluation in Selective Laser Melting. 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS). Bd. 52. IFAC-PapersOnLine. Amsterdam [u.a.]: Elsevier BV. doi:10.1016/j.ifacol.2019.10.041, .","short":"A. Huxol, F.-J. Villmer, DoE Methods for Parameter Evaluation in Selective Laser Melting, Elsevier BV, Amsterdam [u.a.], 2019."},"volume":52,"keyword":["Additive manufacturing","quality control","process qualification","process control","screening design"],"language":[{"iso":"eng"}],"publication_identifier":{"issn":["2405-8963"]},"publication":"13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS)","date_created":"2025-04-15T09:27:00Z","date_updated":"2025-06-26T13:40:48Z"},{"page":"254-259","status":"public","author":[{"last_name":"Simoni","first_name":"Filippo","full_name":"Simoni, Filippo"},{"last_name":"Huxol","id":"43559","first_name":"Andrea","full_name":"Huxol, Andrea"},{"id":"14290","full_name":"Villmer, Franz-Josef","last_name":"Villmer","first_name":"Franz-Josef"}],"year":"2019","citation":{"apa":"Simoni, F., Huxol, A., & Villmer, F.-J. (2019). Approach Towards Surface Improvement in Additively Manufactured Tools. In 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS) (Vol. 52, pp. 254–259). Elsevier BV. https://doi.org/10.1016/j.ifacol.2019.10.032","ieee":"F. Simoni, A. Huxol, and F.-J. Villmer, Approach Towards Surface Improvement in Additively Manufactured Tools, vol. 52. Amsterdam [u.a.]: Elsevier BV, 2019, pp. 254–259. doi: 10.1016/j.ifacol.2019.10.032.","chicago":"Simoni, Filippo, Andrea Huxol, and Franz-Josef Villmer. Approach Towards Surface Improvement in Additively Manufactured Tools. 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS). Vol. 52. IFAC-PapersOnLine. Amsterdam [u.a.]: Elsevier BV, 2019. https://doi.org/10.1016/j.ifacol.2019.10.032.","van":"Simoni F, Huxol A, Villmer FJ. Approach Towards Surface Improvement in Additively Manufactured Tools. 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS). Amsterdam [u.a.]: Elsevier BV; 2019. (IFAC-PapersOnLine; vol. 52).","ama":"Simoni F, Huxol A, Villmer FJ. Approach Towards Surface Improvement in Additively Manufactured Tools. Vol 52. Elsevier BV; 2019:254-259. doi:10.1016/j.ifacol.2019.10.032","ufg":"Simoni, Filippo/Huxol, Andrea/Villmer, Franz-Josef: Approach Towards Surface Improvement in Additively Manufactured Tools, Bd. 52, Amsterdam [u.a.] 2019 (IFAC-PapersOnLine).","havard":"F. Simoni, A. Huxol, F.-J. Villmer, Approach Towards Surface Improvement in Additively Manufactured Tools, Elsevier BV, Amsterdam [u.a.], 2019.","mla":"Simoni, Filippo, et al. “Approach Towards Surface Improvement in Additively Manufactured Tools.” 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS), vol. 52, Elsevier BV, 2019, pp. 254–59, https://doi.org/10.1016/j.ifacol.2019.10.032.","bjps":"Simoni F, Huxol A and Villmer F-J (2019) Approach Towards Surface Improvement in Additively Manufactured Tools. Amsterdam [u.a.]: Elsevier BV.","short":"F. Simoni, A. Huxol, F.-J. Villmer, Approach Towards Surface Improvement in Additively Manufactured Tools, Elsevier BV, Amsterdam [u.a.], 2019.","din1505-2-1":"Simoni, Filippo ; Huxol, Andrea ; Villmer, Franz-Josef: Approach Towards Surface Improvement in Additively Manufactured Tools, IFAC-PapersOnLine. Bd. 52. Amsterdam [u.a.] : Elsevier BV, 2019","chicago-de":"Simoni, Filippo, Andrea Huxol und Franz-Josef Villmer. 2019. Approach Towards Surface Improvement in Additively Manufactured Tools. 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS). Bd. 52. IFAC-PapersOnLine. Amsterdam [u.a.]: Elsevier BV. doi:10.1016/j.ifacol.2019.10.032, ."},"volume":52,"title":"Approach Towards Surface Improvement in Additively Manufactured Tools","language":[{"iso":"eng"}],"keyword":["Direct rapid tooling","toolmaking","additive manufacturing process chain","process control","production systems","selective laser melting","surface roughness","laser surface re-melting"],"date_updated":"2025-06-26T13:40:36Z","date_created":"2025-04-15T09:32:02Z","publication_identifier":{"issn":["2405-8963"]},"publication":"13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS)","publisher":"Elsevier BV","department":[{"_id":"DEP7000"}],"conference":{"end_date":"2019-08-14","start_date":"2019-08-12","name":"13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS)","location":"Oshawa, CANADA"},"abstract":[{"lang":"eng","text":"Additive Manufacturing has arisen as a ground-breaking set of technologies that, thanks to their capability of continuous improvements in performance and cost-efficiency, was able in the last years to replace well-established manufacturing processes. Proficiency in the fabrication of highly complex parts forced this astonishing development. This research is based on the idea that through the integration of additive and conventional manufacturing technologies it is possible to achieve great cost and operational benefits especially in the field of tool making for injection molding. Such an integrated manufacturing solution could overcome the limitations of independent additive, subtractive, and post-processing procedures by strengthening their potentialities. The present study highlights the opportunities of a synergy between the above-mentioned manufacturing technologies for the optimized fabrication of injection molds. An additive manufacturing process chain is presented, and special attention is given to the surface quality and its optimization directly in the Selective Laser Melting process. The potentialities of the Laser Surface Re-melting technique are analyzed, and the process optimization leads to a reduction of 45% of the average roughness directly in the SLM process. (C) 2019, IFAC (International Federation of Automatic Control) Hosting by Elsevier Ltd. All rights reserved."}],"publication_status":"published","series_title":"IFAC-PapersOnLine","place":"Amsterdam [u.a.]","doi":"10.1016/j.ifacol.2019.10.032","_id":"12792","user_id":"83781","intvolume":" 52","type":"conference_editor_article"},{"abstract":[{"text":"The configuration of current automated production systems is complex and therefore time consuming while the market demands an easy setup and adaptability due to smaller batch sizes and volatile markets. While there are different concepts in research on how to simplify the engineering process by using generic skills or capabilities of devices, run-time control is still achieved with proprietary communication protocols and commands. The concept in this paper uses skills not only in the phase of engineering but also consequently for direct and generic control of field-devices. An executable skill-metamodel therefore describes the methodological functionality which is implemented by using OPC UA due to its vendor independence as well as built-in services and information model. The implementation uses client/server-based OPC UA and the pub/sub pattern to prepare for a deterministic real-time control in conjunction with TSN, which is required by industrial automation.","lang":"eng"}],"conference":{"location":"Zaragoza, SPAIN","name":"24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)","end_date":"201-09-13","start_date":"2019-09-10"},"department":[{"_id":"DEP5023"}],"publisher":"IEEE","series_title":"IEEE International Conference on Emerging Technologies and Factory Automation-ETFA","publication_status":"published","doi":"10.1109/etfa.2019.8869473","_id":"12826","place":"[Piscataway, NJ]","type":"conference_editor_article","user_id":"83781","author":[{"first_name":"Patrick","full_name":"Zimmermann, Patrick","last_name":"Zimmermann"},{"full_name":"Axmann, Etienne","last_name":"Axmann","first_name":"Etienne"},{"full_name":"Brandenbourger, Benjamin","first_name":"Benjamin","last_name":"Brandenbourger"},{"first_name":"Kirill","full_name":"Dorofeev, Kirill","last_name":"Dorofeev"},{"full_name":"Mankowski, Andre","last_name":"Mankowski","id":"51482","first_name":"Andre"},{"full_name":"Zanini, Paulo","last_name":"Zanini","first_name":"Paulo"}],"year":"2019","page":"1101-1108","status":"public","title":"Skill-based Engineering and Control on Field-Device-Level with OPC UA","citation":{"van":"Zimmermann P, Axmann E, Brandenbourger B, Dorofeev K, Mankowski A, Zanini P. Skill-based Engineering and Control on Field-Device-Level with OPC UA. IEEE International Conference on Emerging Technologies and Factory Automation , Institute of Electrical and Electronics Engineers, Universidad de Zaragoza , IEEE Industrial Electronics Society , editors. 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). [Piscataway, NJ]: IEEE; 2019. (IEEE International Conference on Emerging Technologies and Factory Automation-ETFA).","mla":"Zimmermann, Patrick, et al. “Skill-Based Engineering and Control on Field-Device-Level with OPC UA.” 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), edited by IEEE International Conference on Emerging Technologies and Factory Automation et al., IEEE, 2019, pp. 1101–08, https://doi.org/10.1109/etfa.2019.8869473.","bjps":"Zimmermann P et al. (2019) Skill-Based Engineering and Control on Field-Device-Level with OPC UA, IEEE International Conference on Emerging Technologies and Factory Automation et al. (eds). [Piscataway, NJ]: IEEE.","havard":"P. Zimmermann, E. Axmann, B. Brandenbourger, K. Dorofeev, A. Mankowski, P. Zanini, Skill-based Engineering and Control on Field-Device-Level with OPC UA, IEEE, [Piscataway, NJ], 2019.","ufg":"Zimmermann, Patrick u. a.: Skill-based Engineering and Control on Field-Device-Level with OPC UA, hg. von IEEE International Conference on Emerging Technologies and Factory Automation u. a., [Piscataway, NJ] 2019 (IEEE International Conference on Emerging Technologies and Factory Automation-ETFA).","apa":"Zimmermann, P., Axmann, E., Brandenbourger, B., Dorofeev, K., Mankowski, A., & Zanini, P. (2019). Skill-based Engineering and Control on Field-Device-Level with OPC UA. In IEEE International Conference on Emerging Technologies and Factory Automation , Institute of Electrical and Electronics Engineers, Universidad de Zaragoza , & IEEE Industrial Electronics Society (Eds.), 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) (pp. 1101–1108). IEEE. https://doi.org/10.1109/etfa.2019.8869473","chicago":"Zimmermann, Patrick, Etienne Axmann, Benjamin Brandenbourger, Kirill Dorofeev, Andre Mankowski, and Paulo Zanini. Skill-Based Engineering and Control on Field-Device-Level with OPC UA. Edited by IEEE International Conference on Emerging Technologies and Factory Automation , Institute of Electrical and Electronics Engineers, Universidad de Zaragoza , and IEEE Industrial Electronics Society . 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). IEEE International Conference on Emerging Technologies and Factory Automation-ETFA. [Piscataway, NJ]: IEEE, 2019. https://doi.org/10.1109/etfa.2019.8869473.","short":"P. Zimmermann, E. Axmann, B. Brandenbourger, K. Dorofeev, A. Mankowski, P. Zanini, Skill-Based Engineering and Control on Field-Device-Level with OPC UA, IEEE, [Piscataway, NJ], 2019.","din1505-2-1":"Zimmermann, Patrick ; Axmann, Etienne ; Brandenbourger, Benjamin ; Dorofeev, Kirill ; Mankowski, Andre ; Zanini, Paulo ; IEEE International Conference on Emerging Technologies and Factory Automation ; Institute of Electrical and Electronics Engineers ; Universidad de Zaragoza ; IEEE Industrial Electronics Society (Hrsg.): Skill-based Engineering and Control on Field-Device-Level with OPC UA, IEEE International Conference on Emerging Technologies and Factory Automation-ETFA. [Piscataway, NJ] : IEEE, 2019","chicago-de":"Zimmermann, Patrick, Etienne Axmann, Benjamin Brandenbourger, Kirill Dorofeev, Andre Mankowski und Paulo Zanini. 2019. Skill-based Engineering and Control on Field-Device-Level with OPC UA. Hg. von IEEE International Conference on Emerging Technologies and Factory Automation , Institute of Electrical and Electronics Engineers, Universidad de Zaragoza , und IEEE Industrial Electronics Society . 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). IEEE International Conference on Emerging Technologies and Factory Automation-ETFA. [Piscataway, NJ]: IEEE. doi:10.1109/etfa.2019.8869473, .","ama":"Zimmermann P, Axmann E, Brandenbourger B, Dorofeev K, Mankowski A, Zanini P. Skill-Based Engineering and Control on Field-Device-Level with OPC UA. (IEEE International Conference on Emerging Technologies and Factory Automation , Institute of Electrical and Electronics Engineers, Universidad de Zaragoza , IEEE Industrial Electronics Society , eds.). IEEE; 2019:1101-1108. doi:10.1109/etfa.2019.8869473","ieee":"P. Zimmermann, E. Axmann, B. Brandenbourger, K. Dorofeev, A. Mankowski, and P. Zanini, Skill-based Engineering and Control on Field-Device-Level with OPC UA. [Piscataway, NJ]: IEEE, 2019, pp. 1101–1108. doi: 10.1109/etfa.2019.8869473."},"language":[{"iso":"eng"}],"keyword":["OPC UA","Skills","Capabilities","Engineering","Field-Device","Interoperability","Control"],"date_created":"2025-04-22T13:52:53Z","publication_identifier":{"issn":["1946-0740"],"eisbn":["978-1-7281-0302-0"],"isbn":["978-1-7281-0303-7"],"eissn":["1946-0759"]},"publication":"24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)","corporate_editor":["IEEE International Conference on Emerging Technologies and Factory Automation ","Institute of Electrical and Electronics Engineers","Universidad de Zaragoza ","IEEE Industrial Electronics Society "],"date_updated":"2025-06-26T13:27:46Z"},{"type":"book_editor","intvolume":" 7","user_id":"83781","_id":"4506","doi":"10.1007/978-3-662-55232-2","place":"Berlin","series_title":"Technologien für die intelligente Automation ","publication_status":"published","abstract":[{"text":"In diesem Tagungsband sind die besten Beiträge des 7. Jahreskolloquiums \"Kommunikation in der Automation\" (KommA 2016) und des 5. Jahreskolloquiums \"Bildverarbeitung in der Automation\" (BVAu 2016) enthalten. Die Kolloquien fanden am 30. November und 1. Dezember 2016 anlässlich des 10jährigen Jubiläums des inIT - Institut für industrielle Informationstechnik in der SmartFactoryOWL, einer herstellerunabhängigen und offenen Industrie 4.0 Forschungs- und Demonstrationsplattform und zugleich Testfeld für den Mittelstand, in Lemgo statt.\r\nDie vorgestellten neuesten Forschungsergebnisse auf den Gebieten der industriellen Kommunikationstechnik und Bildverarbeitung erweitern den aktuellen Stand der Forschung und Technik. Die in den Beiträgen enthaltenen anschauliche Anwendungsbeispiele aus dem Bereich der Automation setzen die Ergebnisse in den direkten Anwendungsbezug.","lang":"ger"}],"department":[{"_id":"DEP5023"}],"conference":{"start_date":"2016-11-30","end_date":"2026-12-01","name":"7. Jahreskolloquiums \"Kommunikation in der Automation\" (KommA 2016) / 5. Jahreskolloquiums \"Bildverarbeitung in der Automation\" (BVAu 2016)","location":"Lemgo"},"publisher":"Springer Vieweg","publication_identifier":{"eisbn":["978-3-662-55232-2 "],"isbn":["978-3-662-55231-5"]},"date_created":"2021-01-22T08:40:04Z","editor":[{"first_name":"Jürgen","full_name":"Jasperneite, Jürgen","id":"1899","last_name":"Jasperneite"},{"first_name":"Volker","full_name":"Lohweg, Volker","last_name":"Lohweg","id":"1804","orcid":"0000-0002-3325-7887"}],"date_updated":"2025-05-12T08:19:51Z","keyword":["Industrielle Kommunikationstechnik","Industrielle Bildverarbeitung","network reliability and redundancy methods","Networked Controls Systems","wireless real-time communication","quality control","reliability","safety and risk"],"language":[{"iso":"ger"}],"title":" Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik","citation":{"ieee":"J. Jasperneite and V. Lohweg, Eds., Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik, vol. 7. Berlin: Springer Vieweg, 2017. doi: 10.1007/978-3-662-55232-2.","apa":"Jasperneite, J., & Lohweg, V. (Eds.). (2017). Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik (Vol. 7). Springer Vieweg. https://doi.org/10.1007/978-3-662-55232-2","chicago":"Jasperneite, Jürgen, and Volker Lohweg, eds. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik. Vol. 7. Technologien für die intelligente Automation . Berlin: Springer Vieweg, 2017. https://doi.org/10.1007/978-3-662-55232-2.","ama":"Jasperneite J, Lohweg V, eds. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik. Vol 7. Springer Vieweg; 2017. doi:10.1007/978-3-662-55232-2","van":"Jasperneite J, Lohweg V, editors. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik. Berlin: Springer Vieweg; 2017. 295 p. (Technologien für die intelligente Automation ; vol. 7).","havard":"J. Jasperneite, V. Lohweg, eds., Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik, Springer Vieweg, Berlin, 2017.","bjps":"Jasperneite J and Lohweg V (eds) (2017) Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik. Berlin: Springer Vieweg.","mla":"Jasperneite, Jürgen, and Volker Lohweg, editors. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik. Springer Vieweg, 2017, https://doi.org/10.1007/978-3-662-55232-2.","ufg":"Jasperneite, Jürgen/Lohweg, Volker: Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik, Bd. 7, Berlin 2017 (Technologien für die intelligente Automation ).","short":"J. Jasperneite, V. Lohweg, eds., Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik, Springer Vieweg, Berlin, 2017.","din1505-2-1":"Jasperneite, J. ; Lohweg, V. (Hrsg.): Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik, Technologien für die intelligente Automation . Bd. 7. Berlin : Springer Vieweg, 2017","chicago-de":"Jasperneite, Jürgen und Volker Lohweg, Hrsg. 2017. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik. Bd. 7. Technologien für die intelligente Automation . Berlin: Springer Vieweg. doi:10.1007/978-3-662-55232-2, ."},"volume":7,"year":"2017","status":"public","page":"295"},{"place":"Danvers","doi":"10.1109/ICDCM.2017.8001049","_id":"328","user_id":"45673","type":"conference","conference":{"start_date":"2017-06-27","end_date":"2017-06-29","name":"IEEE Second International Conference on DC Microgrids (ICDCM) ","location":"Nürnberg"},"department":[{"_id":"DEP5018"}],"issue":"1","abstract":[{"text":"In this paper, concepts for an extended DC network for the main power supply of components from various manufacturers in industrial production are presented. In the first part, detailed requirements for such a network are given from the viewpoint of a customer. Based on those, different concepts for AC/DC conversion and energy management are discussed. As far as AC/DC conversion is concerned, the advantages and drawbacks of several rectifier topologies are listed, as they have a significant impact on the system behavior and EMC properties. \r\nAn intelligent energy management can improve the energy efficiency and reduce downtimes of a plant, which are major requirements from a customer’s viewpoint. ","lang":"eng"}],"language":[{"iso":"eng"}],"keyword":["AC-DC power convertors","electromagnetic compatibility","energy conservation","energy management systems","rectifiers","main power supply","industrial production","DC network","AC-DC conversion","rectifier topologies","EMC properties","intelligent energy management","energy efficiency improvement","downtime reduction","Rectifiers","Switches","Voltage control","Topology","Network topology","Production","Grounding","industrial DC grid","SMART Grid"],"date_updated":"2023-03-15T13:49:46Z","related_material":{"link":[{"relation":"contains","url":"https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8001049"}]},"corporate_editor":["Institute of Electrical and Electronics Engineers (IEEE)"],"date_created":"2018-12-10T15:11:18Z","publication":"2017 IEEE Second International Conference on DC Microgrids (ICDCM)","page":"227-234","status":"public","year":2017,"main_file_link":[{"url":"https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8001049"}],"author":[{"first_name":"Holger","full_name":"Borcherding, Holger","last_name":"Borcherding","id":"1693"},{"id":"42114","first_name":"Johann","last_name":"Austermann","full_name":"Austermann, Johann"},{"first_name":"Timm","full_name":"Kuhlmann, Timm","last_name":"Kuhlmann"},{"full_name":"Weis, Benno","first_name":"Benno","last_name":"Weis"},{"last_name":"Leonide","full_name":"Leonide, Andre","first_name":"Andre"}],"citation":{"din1505-2-1":"Borcherding, Holger ; Austermann, Johann ; Kuhlmann, Timm ; Weis, Benno ; Leonide, Andre: Concepts for a DC Network in Industrial Production. In: Institute of Electrical and Electronics Engineers (IEEE) (Hrsg.): 2017 IEEE Second International Conference on DC Microgrids (ICDCM). Danvers, 2017, S. 227–234","chicago-de":"Borcherding, Holger, Johann Austermann, Timm Kuhlmann, Benno Weis und Andre Leonide. 2017. Concepts for a DC Network in Industrial Production. In: 2017 IEEE Second International Conference on DC Microgrids (ICDCM), hg. von Institute of Electrical and Electronics Engineers (IEEE), 227–234. Danvers. doi:10.1109/ICDCM.2017.8001049, .","short":"H. Borcherding, J. Austermann, T. Kuhlmann, B. Weis, A. Leonide, in: Institute of Electrical and Electronics Engineers (IEEE) (Ed.), 2017 IEEE Second International Conference on DC Microgrids (ICDCM), Danvers, 2017, pp. 227–234.","mla":"Borcherding, Holger, et al. “Concepts for a DC Network in Industrial Production.” 2017 IEEE Second International Conference on DC Microgrids (ICDCM), edited by Institute of Electrical and Electronics Engineers (IEEE), no. 1, 2017, pp. 227–34, doi:10.1109/ICDCM.2017.8001049.","havard":"H. Borcherding, J. Austermann, T. Kuhlmann, B. Weis, A. Leonide, Concepts for a DC Network in Industrial Production, in: Institute of Electrical and Electronics Engineers (IEEE) (Ed.), 2017 IEEE Second International Conference on DC Microgrids (ICDCM), Danvers, 2017: pp. 227–234.","bjps":"Borcherding H et al. (2017) Concepts for a DC Network in Industrial Production. In Institute of Electrical and Electronics Engineers (IEEE) (ed.), 2017 IEEE Second International Conference on DC Microgrids (ICDCM). Danvers, pp. 227–234.","ufg":"Borcherding, Holger et. al. (2017): Concepts for a DC Network in Industrial Production, in: Institute of Electrical and Electronics Engineers (IEEE) (Hg.): 2017 IEEE Second International Conference on DC Microgrids (ICDCM), Danvers, S. 227–234.","van":"Borcherding H, Austermann J, Kuhlmann T, Weis B, Leonide A. Concepts for a DC Network in Industrial Production. In: Institute of Electrical and Electronics Engineers (IEEE), editor. 2017 IEEE Second International Conference on DC Microgrids (ICDCM). Danvers; 2017. p. 227–34.","chicago":"Borcherding, Holger, Johann Austermann, Timm Kuhlmann, Benno Weis, and Andre Leonide. “Concepts for a DC Network in Industrial Production.” In 2017 IEEE Second International Conference on DC Microgrids (ICDCM), edited by Institute of Electrical and Electronics Engineers (IEEE), 227–34. Danvers, 2017. https://doi.org/10.1109/ICDCM.2017.8001049.","apa":"Borcherding, H., Austermann, J., Kuhlmann, T., Weis, B., & Leonide, A. (2017). Concepts for a DC Network in Industrial Production. In Institute of Electrical and Electronics Engineers (IEEE) (Ed.), 2017 IEEE Second International Conference on DC Microgrids (ICDCM) (pp. 227–234). Danvers. https://doi.org/10.1109/ICDCM.2017.8001049","ama":"Borcherding H, Austermann J, Kuhlmann T, Weis B, Leonide A. Concepts for a DC Network in Industrial Production. In: Institute of Electrical and Electronics Engineers (IEEE), ed. 2017 IEEE Second International Conference on DC Microgrids (ICDCM). Danvers; 2017:227-234. doi:10.1109/ICDCM.2017.8001049","ieee":"H. Borcherding, J. Austermann, T. Kuhlmann, B. Weis, and A. Leonide, “Concepts for a DC Network in Industrial Production,” in 2017 IEEE Second International Conference on DC Microgrids (ICDCM), Nürnberg, 2017, no. 1, pp. 227–234."},"title":"Concepts for a DC Network in Industrial Production"},{"issue":"1","abstract":[{"text":"Additive manufacturing (AM) has matured rapidly during the last years due to the advancement of AM machines and materials. Nevertheless, the widespread adoption of AM is still challenged by producing parts with reliable quality. The aim of this paper is t o introduce a first approach to apply in-situ monitoring for quality evaluation of produced parts. Based on the monitored data, a model is developed, in order to predict the quality of ready built parts.","lang":"eng"}],"conference":{"name":"Proceedings7th International Conference","location":"Pordenone, Italy","start_date":"2017-09-28","end_date":"2017-09-29"},"department":[{"_id":"DEP1306"}],"series_title":"Publication series in direct digital manufacturing ","publication_status":"published","_id":"570","place":"Lemgo","type":"conference","user_id":"45673","author":[{"last_name":"Scheideler","full_name":"Scheideler, Eva","first_name":"Eva","id":"61522"},{"full_name":"Huxol, Andrea","id":"43559","first_name":"Andrea","last_name":"Huxol"},{"first_name":"Franz-Josef","full_name":"Villmer, Franz-Josef","last_name":"Villmer","id":"14290"}],"main_file_link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf","open_access":"1"}],"year":2017,"page":"89-100","status":"public","title":"Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models","citation":{"ufg":"Scheideler, Eva et. al. (2017): Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models, in: Elio Padoano et. al. (Hgg.): Production Engineeringand Management (=Publication series in direct digital manufacturing ), Lemgo, S. 89–100.","havard":"E. Scheideler, A. Huxol, F.-J. Villmer, Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineeringand Management, Lemgo, 2017: pp. 89–100.","mla":"Scheideler, Eva, et al. “Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models.” Production Engineeringand Management, edited by Elio Padoano et al., no. 1, 2017, pp. 89–100.","bjps":"Scheideler E, Huxol A and Villmer F-J (2017) Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineeringand Management. Lemgo, pp. 89–100.","van":"Scheideler E, Huxol A, Villmer F-J. Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineeringand Management. Lemgo; 2017. p. 89–100. (Publication series in direct digital manufacturing ).","chicago":"Scheideler, Eva, Andrea Huxol, and Franz-Josef Villmer. “Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models.” In Production Engineeringand Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 89–100. Publication Series in Direct Digital Manufacturing . Lemgo, 2017.","apa":"Scheideler, E., Huxol, A., & Villmer, F.-J. (2017). Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineeringand Management (pp. 89–100). Lemgo.","din1505-2-1":"Scheideler, Eva ; Huxol, Andrea ; Villmer, Franz-Josef: Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineeringand Management, Publication series in direct digital manufacturing . Lemgo, 2017, S. 89–100","chicago-de":"Scheideler, Eva, Andrea Huxol und Franz-Josef Villmer. 2017. Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In: Production Engineeringand Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 89–100. Publication series in direct digital manufacturing . Lemgo.","short":"E. Scheideler, A. Huxol, F.-J. Villmer, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineeringand Management, Lemgo, 2017, pp. 89–100.","ama":"Scheideler E, Huxol A, Villmer F-J. Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineeringand Management. Publication series in direct digital manufacturing . Lemgo; 2017:89-100.","ieee":"E. Scheideler, A. Huxol, and F.-J. Villmer, “Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models,” in Production Engineeringand Management, Pordenone, Italy, 2017, no. 1, pp. 89–100."},"oa":"1","language":[{"iso":"eng"}],"keyword":["Nondestructive quality control","Predictive analytics","Metal model","Additive manufacturing"],"date_created":"2019-02-18T09:46:43Z","publication":"Production Engineeringand Management","publication_identifier":{"isbn":["978-3-946856-01-6"]},"editor":[{"full_name":"Padoano, Elio","first_name":"Elio","last_name":"Padoano"},{"last_name":"Villmer","first_name":"Franz-Josef","full_name":"Villmer, Franz-Josef"}],"corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"related_material":{"link":[{"relation":"contains","url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf"}]},"date_updated":"2023-03-15T13:50:01Z"},{"year":2017,"main_file_link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf","open_access":"1"}],"author":[{"full_name":"Huxol, Andrea","id":"43559","last_name":"Huxol","first_name":"Andrea"},{"last_name":"Davis","full_name":"Davis, Andrea","id":"68611","first_name":"Andrea"},{"full_name":"Villmer, Franz-Josef","first_name":"Franz-Josef","id":"14290","last_name":"Villmer"},{"first_name":"Eva","id":"61522","last_name":"Scheideler","full_name":"Scheideler, Eva"}],"page":"63-74","status":"public","title":"Deployment of Process Capability Analysis for Single-Part Production","citation":{"short":"A. Huxol, A. Davis, F.-J. Villmer, E. Scheideler, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017, pp. 63–74.","din1505-2-1":"Huxol, Andrea ; Davis, Andrea ; Villmer, Franz-Josef ; Scheideler, Eva: Deployment of Process Capability Analysis for Single-Part Production. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management, Publication series in direct digital manufacturing . Lemgo, 2017, S. 63–74","chicago-de":"Huxol, Andrea, Andrea Davis, Franz-Josef Villmer und Eva Scheideler. 2017. Deployment of Process Capability Analysis for Single-Part Production. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 63–74. Publication series in direct digital manufacturing . Lemgo.","ieee":"A. Huxol, A. Davis, F.-J. Villmer, and E. Scheideler, “Deployment of Process Capability Analysis for Single-Part Production,” in Production Engineering and Management, Pordenone, Italy, 2017, no. 1, pp. 63–74.","apa":"Huxol, A., Davis, A., Villmer, F.-J., & Scheideler, E. (2017). Deployment of Process Capability Analysis for Single-Part Production. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 63–74). Lemgo.","chicago":"Huxol, Andrea, Andrea Davis, Franz-Josef Villmer, and Eva Scheideler. “Deployment of Process Capability Analysis for Single-Part Production.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 63–74. Publication Series in Direct Digital Manufacturing . Lemgo, 2017.","ama":"Huxol A, Davis A, Villmer F-J, Scheideler E. Deployment of Process Capability Analysis for Single-Part Production. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Publication series in direct digital manufacturing . Lemgo; 2017:63-74.","van":"Huxol A, Davis A, Villmer F-J, Scheideler E. Deployment of Process Capability Analysis for Single-Part Production. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2017. p. 63–74. (Publication series in direct digital manufacturing ).","bjps":"Huxol A et al. (2017) Deployment of Process Capability Analysis for Single-Part Production. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 63–74.","havard":"A. Huxol, A. Davis, F.-J. Villmer, E. Scheideler, Deployment of Process Capability Analysis for Single-Part Production, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017: pp. 63–74.","mla":"Huxol, Andrea, et al. “Deployment of Process Capability Analysis for Single-Part Production.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2017, pp. 63–74.","ufg":"Huxol, Andrea et. al. (2017): Deployment of Process Capability Analysis for Single-Part Production, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management (=Publication series in direct digital manufacturing ), Lemgo, S. 63–74."},"oa":"1","language":[{"iso":"eng"}],"keyword":["Statistical process control","Process capability analysis","Single-part production","Process optimization"],"date_created":"2019-02-18T11:16:07Z","publication_identifier":{"isbn":["978-3-946856-01-6"]},"publication":"Production Engineering and Management","related_material":{"link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf","relation":"contains"}]},"date_updated":"2023-03-15T13:50:01Z","editor":[{"last_name":"Padoano","full_name":"Padoano, Elio","first_name":"Elio"},{"first_name":"Franz-Josef","full_name":"Villmer, Franz-Josef","last_name":"Villmer"}],"corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"department":[{"_id":"DEP1306"}],"conference":{"end_date":"2017-09-29","start_date":"2017-09-28","name":"Proceedings7th International Conference","location":"Pordenone, Italy"},"abstract":[{"lang":"eng","text":"A rising number of product variants together with decreasing lot sizes are a result of the trend of individualization. Besides the upcoming organizational issues, changes in the production technologies are required. Direct digital manufacturing contributes to solve this problem by enabling the production of parts right from the CAD data.Process capability analysis is applied in several industries to prove the reliable compliance of products with quality requirements. As it is based on statistical methods, new challenges arise in the context of single-part production.The paper describes and compares different approaches for the adoption of process capability analysis for single-part production with special focus on additive manufacturing technologies. The statistical background and the applicability of different capability parameters are discussed. An overview of existing research work is given and supplemented by own approaches for the adoption of statistical methods for single-part production. The aim of the research work is to establish a first approach for the qualification of new technologies in single-part production."}],"issue":"1","series_title":"Publication series in direct digital manufacturing ","publication_status":"published","place":"Lemgo","_id":"577","type":"conference","user_id":"45673"},{"date_updated":"2024-03-22T13:19:02Z","related_material":{"link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf","relation":"contains"}]},"corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"editor":[{"last_name":"Padoano","full_name":"Padoano, Elio","first_name":"Elio"},{"last_name":"Villmer","first_name":"Franz-Josef","full_name":"Villmer, Franz-Josef","id":"14290"}],"publication_identifier":{"isbn":["978-3-946856-01-6"]},"publication":"\t Production engineering and management : proceedings 7th international conference, September 28 and 29, 2017, Pordenone, Italy ","date_created":"2019-02-18T11:34:36Z","keyword":["Additive manufacturing","Process control","Predictive modeling","Predictive control"],"language":[{"iso":"eng"}],"oa":"1","volume":2017,"citation":{"ama":"Scheideler E, Ahlemeyer-Stubbe A. Quality Control of Additive Manufacturing Using Statistical Prediction Models. In: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management : Proceedings 7th International Conference, September 28 and 29, 2017, Pordenone, Italy . Vol 2017. Publication series in direct digital manufacturing . ; 2017:3-12.","van":"Scheideler E, Ahlemeyer-Stubbe A. Quality Control of Additive Manufacturing Using Statistical Prediction Models. In: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, editors. Production engineering and management : proceedings 7th international conference, September 28 and 29, 2017, Pordenone, Italy . Lemgo; 2017. p. 3–12. ( Publication series in direct digital manufacturing ; vol. 2017).","bjps":"Scheideler E and Ahlemeyer-Stubbe A (2017) Quality Control of Additive Manufacturing Using Statistical Prediction Models. In Padoano E et al. (eds), Production Engineering and Management : Proceedings 7th International Conference, September 28 and 29, 2017, Pordenone, Italy , vol. 2017. Lemgo, pp. 3–12.","havard":"E. Scheideler, A. Ahlemeyer-Stubbe, Quality Control of Additive Manufacturing Using Statistical Prediction Models, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management : Proceedings 7th International Conference, September 28 and 29, 2017, Pordenone, Italy , Lemgo, 2017: pp. 3–12.","mla":"Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Quality Control of Additive Manufacturing Using Statistical Prediction Models.” Production Engineering and Management : Proceedings 7th International Conference, September 28 and 29, 2017, Pordenone, Italy , edited by Elio Padoano et al., vol. 2017, no. 1, 2017, pp. 3–12.","ufg":"Scheideler, Eva/Ahlemeyer-Stubbe, Andrea: Quality Control of Additive Manufacturing Using Statistical Prediction Models, in: Padoano, Elio u. a. (Hgg.): Production engineering and management : proceedings 7th international conference, September 28 and 29, 2017, Pordenone, Italy , Bd. 2017, Lemgo 2017 ( Publication series in direct digital manufacturing ), S. 3–12.","ieee":"E. Scheideler and A. Ahlemeyer-Stubbe, “Quality Control of Additive Manufacturing Using Statistical Prediction Models,” in Production engineering and management : proceedings 7th international conference, September 28 and 29, 2017, Pordenone, Italy , Pordenone, Italy, 2017, vol. 2017, no. 1, pp. 3–12.","apa":"Scheideler, E., & Ahlemeyer-Stubbe, A. (2017). Quality Control of Additive Manufacturing Using Statistical Prediction Models. In E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe (Eds.), Production engineering and management : proceedings 7th international conference, September 28 and 29, 2017, Pordenone, Italy (Vol. 2017, Issue 1, pp. 3–12).","chicago":"Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Quality Control of Additive Manufacturing Using Statistical Prediction Models.” In Production Engineering and Management : Proceedings 7th International Conference, September 28 and 29, 2017, Pordenone, Italy , edited by Elio Padoano, Franz-Josef Villmer, Department of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, 2017:3–12. Publication Series in Direct Digital Manufacturing . Lemgo, 2017.","short":"E. Scheideler, A. Ahlemeyer-Stubbe, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management : Proceedings 7th International Conference, September 28 and 29, 2017, Pordenone, Italy , Lemgo, 2017, pp. 3–12.","chicago-de":"Scheideler, Eva und Andrea Ahlemeyer-Stubbe. 2017. Quality Control of Additive Manufacturing Using Statistical Prediction Models. In: Production engineering and management : proceedings 7th international conference, September 28 and 29, 2017, Pordenone, Italy , hg. von Elio Padoano, Franz-Josef Villmer, Department of Production Engineering and Management, und Hochschule Ostwestfalen-Lippe, 2017:3–12. Publication series in direct digital manufacturing . Lemgo.","din1505-2-1":"Scheideler, Eva ; Ahlemeyer-Stubbe, Andrea: Quality Control of Additive Manufacturing Using Statistical Prediction Models. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management ; Hochschule Ostwestfalen-Lippe (Hrsg.): Production engineering and management : proceedings 7th international conference, September 28 and 29, 2017, Pordenone, Italy , Publication series in direct digital manufacturing . Bd. 2017. Lemgo, 2017, S. 3–12"},"title":"Quality Control of Additive Manufacturing Using Statistical Prediction Models","status":"public","page":"3-12","year":"2017","main_file_link":[{"open_access":"1","url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf"}],"author":[{"id":"61522","first_name":"Eva","full_name":"Scheideler, Eva","last_name":"Scheideler"},{"last_name":"Ahlemeyer-Stubbe","full_name":"Ahlemeyer-Stubbe, Andrea","first_name":"Andrea"}],"user_id":"83781","intvolume":" 2017","type":"conference","place":"Lemgo","_id":"580","publication_status":"published","series_title":"\t Publication series in direct digital manufacturing ","conference":{"end_date":"2017-09-29","start_date":"2017-09-28","name":"7th International Conference on Production Engineering and Management","location":"Pordenone, Italy"},"department":[{"_id":"DEP1306"}],"abstract":[{"text":"Additive Manufacturing (AM) is increasingly used to design new products. This is possible due to the further development of the AM-processes and materials. The lack of quality assurance of AM built parts is a key technological barrier that prevents manufacturers from adopting. The quality of an additive manufactured part is influenced by more than 50 parameters, which make process control difficult. Current research deals with using real time monitoring of the melt pool as feedback control for laser power. This paper illustrates challenges and opportunities of applying statistical predictive modeling and unsupervised learning to control additive manufacturing. In particular, an approach how to build a feedforward controller will be discussed.","lang":"eng"}],"issue":"1"},{"type":"scientific_journal_article","intvolume":" 80","user_id":"83781","_id":"12975","doi":"10.1016/j.foodcont.2017.05.005","place":"Amsterdam","publication_status":"published","issue":"10","abstract":[{"lang":"eng","text":"Properly handled fish is usually marketed as “fresh fish” until day 10 after fishing. About 40% of the total fishery that is used for direct human consumption is marketed in fresh form stored at temperatures up to +2 °C. Currently, there are no validated methods available for controlling the recommended period of storage. Apart from being a potential source for food fraud, spoiled fish represents a major source of foodborne illnesses and intoxications.\r\nIn this study, a rapid MALDI-TOF mass spectrometry based screening method was developed using the vitreous fluid of fish eyes as specimen for the examination of different days of storage. The vitreous fluid was collected from n = 100 freshly fished brown trouts at day 0, 3, 7, 9, and 11 post mortem (n = 20 brown trouts each day of examination). The samples were immediately measured by MALDI-TOF mass spectrometry in linear positive mode (mass range m/z 2000–20,000 Da). For quality assurance the experiment was repeated with a set of brown trouts (n = 100) originating from the same fish farm and with brown trouts (n = 100) originating from a different fish farm. For specificity testing rainbow trouts (n = 10) were examined accordingly. All obtained mass spectra were processed by means of MALDI Biotyper OC 3.1 and ClinProTools 3.0 software.\r\nThe MALDI Biotyper approach showed limited applicability for the identification of the time of storage. However, it was suitable to reliably discriminate between the closely related species brown and rainbow trout. Processing by ClinProTools revealed four crucial mass peaks (m/z 2594 Da, m/z 4857 Da, m/z 4879 Da, m/z 4899 Da) which enabled a reliable differentiation between day 0 and 3, 7, 9, 11 (rate of correct identification > 90%) as well as the differentiation between day 3 and 7, 9, 11 (rate of correct identification > 72%). However, this approach showed limited applicability within the end of the tested period of storage when comparing between day 7, 9, or 11."}],"department":[{"_id":"DEP4010"}],"publisher":"Elsevier ","quality_controlled":"1","publication":"Food Control","publication_identifier":{"issn":["0956-7135"]},"date_created":"2025-06-15T10:29:56Z","date_updated":"2025-06-18T12:06:11Z","keyword":["MALDI-TOF","Mass spectrometry","Freshness","Fish","Quality control","Authenticity"],"language":[{"iso":"eng"}],"title":"A novel approach for the determination of freshness and identity of trouts by MALDI-TOF mass spectrometry","extern":"1","volume":80,"citation":{"ama":"Ulrich S, Beindorf P, Biermaier B, Schwaiger K, Gareis M, Gottschalk C. A novel approach for the determination of freshness and identity of trouts by MALDI-TOF mass spectrometry. Food Control. 2017;80(10):281-289. doi:10.1016/j.foodcont.2017.05.005","ieee":"S. Ulrich, P. Beindorf, B. Biermaier, K. Schwaiger, M. Gareis, and C. Gottschalk, “A novel approach for the determination of freshness and identity of trouts by MALDI-TOF mass spectrometry,” Food Control, vol. 80, no. 10, pp. 281–289, 2017, doi: 10.1016/j.foodcont.2017.05.005.","bjps":"Ulrich S et al. (2017) A Novel Approach for the Determination of Freshness and Identity of Trouts by MALDI-TOF Mass Spectrometry. Food Control 80, 281–289.","mla":"Ulrich, Sebastian, et al. “A Novel Approach for the Determination of Freshness and Identity of Trouts by MALDI-TOF Mass Spectrometry.” Food Control, vol. 80, no. 10, 2017, pp. 281–89, https://doi.org/10.1016/j.foodcont.2017.05.005.","havard":"S. Ulrich, P. Beindorf, B. Biermaier, K. Schwaiger, M. Gareis, C. Gottschalk, A novel approach for the determination of freshness and identity of trouts by MALDI-TOF mass spectrometry, Food Control. 80 (2017) 281–289.","ufg":"Ulrich, Sebastian u. a.: A novel approach for the determination of freshness and identity of trouts by MALDI-TOF mass spectrometry, in: Food Control 80 (2017), H. 10, S. 281–289.","van":"Ulrich S, Beindorf P, Biermaier B, Schwaiger K, Gareis M, Gottschalk C. A novel approach for the determination of freshness and identity of trouts by MALDI-TOF mass spectrometry. Food Control. 2017;80(10):281–9.","chicago":"Ulrich, Sebastian, Philipp–Michael Beindorf, Barbara Biermaier, Karin Schwaiger, Manfred Gareis, and Christoph Gottschalk. “A Novel Approach for the Determination of Freshness and Identity of Trouts by MALDI-TOF Mass Spectrometry.” Food Control 80, no. 10 (2017): 281–89. https://doi.org/10.1016/j.foodcont.2017.05.005.","apa":"Ulrich, S., Beindorf, P., Biermaier, B., Schwaiger, K., Gareis, M., & Gottschalk, C. (2017). A novel approach for the determination of freshness and identity of trouts by MALDI-TOF mass spectrometry. Food Control, 80(10), 281–289. https://doi.org/10.1016/j.foodcont.2017.05.005","din1505-2-1":"Ulrich, Sebastian ; Beindorf, Philipp–Michael ; Biermaier, Barbara ; Schwaiger, Karin ; Gareis, Manfred ; Gottschalk, Christoph: A novel approach for the determination of freshness and identity of trouts by MALDI-TOF mass spectrometry. In: Food Control Bd. 80. Amsterdam, Elsevier (2017), Nr. 10, S. 281–289","chicago-de":"Ulrich, Sebastian, Philipp–Michael Beindorf, Barbara Biermaier, Karin Schwaiger, Manfred Gareis und Christoph Gottschalk. 2017. A novel approach for the determination of freshness and identity of trouts by MALDI-TOF mass spectrometry. Food Control 80, Nr. 10: 281–289. doi:10.1016/j.foodcont.2017.05.005, .","short":"S. Ulrich, P. Beindorf, B. Biermaier, K. Schwaiger, M. Gareis, C. Gottschalk, Food Control 80 (2017) 281–289."},"year":"2017","author":[{"orcid":"0000-0002-4511-9537","last_name":"Ulrich","full_name":"Ulrich, Sebastian","first_name":"Sebastian","id":"85847"},{"full_name":"Beindorf, Philipp–Michael","last_name":"Beindorf","first_name":"Philipp–Michael"},{"last_name":"Biermaier","first_name":"Barbara","full_name":"Biermaier, Barbara"},{"last_name":"Schwaiger","first_name":"Karin","full_name":"Schwaiger, Karin"},{"first_name":"Manfred","last_name":"Gareis","full_name":"Gareis, Manfred"},{"full_name":"Gottschalk, Christoph","first_name":"Christoph","last_name":"Gottschalk"}],"status":"public","page":"281-289"},{"publication":"2016 18th European Conference on Power Electronics and Applications (EPE'16 ECCE Europe)","publication_identifier":{"isbn":["978-3-8007-4186-1"]},"date_created":"2018-11-27T10:16:16Z","related_material":{"link":[{"url":"https://ieeexplore.ieee.org/document/7695687","relation":"contains"}]},"date_updated":"2023-03-15T13:49:42Z","keyword":["electric current control","induction motors","invertors","permanent magnet motors","reluctance motors","sensorless machine control","torque control","modular solution kit","intralogistic drives","automated warehouse","energy consumption reduction","optimized components interaction","induction motor","synchronous reluctance motor","permanent magnet synchronous machine","sensorless control technique","signal injection","rotor position","motor current","MTPA-control","regeneration unit","DC link","frequency inverters","buck converter","synchronous inverter","line-filter","Induction motors","Reluctance motors","Permanent magnet motors","Rotors","Torque","Inverters","intralogistics","reluctance motor","sensorless control","regeneration unit","braking energy"],"language":[{"iso":"eng"}],"title":"High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications","citation":{"ieee":"J. Austermann, H. Borcherding, H. Stichweh, and V. Grabs, “High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications,” in 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe), Karlsruhe, 2016, pp. 1639–1646.","apa":"Austermann, J., Borcherding, H., Stichweh, H., & Grabs, V. (2016). High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications. In 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe) (pp. 1639–1646). Berlin ; Offenbach: VDE Verlag. https://doi.org/10.1109/EPE.2016.7695687","chicago":"Austermann, Johann, Holger Borcherding, H. Stichweh, and Volker Grabs. “High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications.” In 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe), 1639–46. Berlin ; Offenbach: VDE Verlag, 2016. https://doi.org/10.1109/EPE.2016.7695687.","ama":"Austermann J, Borcherding H, Stichweh H, Grabs V. High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications. In: 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe). Berlin ; Offenbach: VDE Verlag; 2016:1639-1646. doi:10.1109/EPE.2016.7695687","van":"Austermann J, Borcherding H, Stichweh H, Grabs V. High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications. In: 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe). Berlin ; Offenbach: VDE Verlag; 2016. p. 1639–46.","bjps":"Austermann J et al. (2016) High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications. 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe). Berlin ; Offenbach: VDE Verlag, pp. 1639–1646.","mla":"Austermann, Johann, et al. “High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications.” 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe), VDE Verlag, 2016, pp. 1639–46, doi:10.1109/EPE.2016.7695687.","havard":"J. Austermann, H. Borcherding, H. Stichweh, V. Grabs, High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications, in: 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe), VDE Verlag, Berlin ; Offenbach, 2016: pp. 1639–1646.","ufg":"Austermann, Johann et. al. (2016): High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications, in: 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe), Berlin ; Offenbach, S. 1639–1646.","short":"J. Austermann, H. Borcherding, H. Stichweh, V. Grabs, in: 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe), VDE Verlag, Berlin ; Offenbach, 2016, pp. 1639–1646.","chicago-de":"Austermann, Johann, Holger Borcherding, H. Stichweh und Volker Grabs. 2016. High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications. In: 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe), 1639–1646. Berlin ; Offenbach: VDE Verlag. doi:10.1109/EPE.2016.7695687, .","din1505-2-1":"Austermann, Johann ; Borcherding, Holger ; Stichweh, H. ; Grabs, Volker: High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications. In: 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe). Berlin ; Offenbach : VDE Verlag, 2016, S. 1639–1646"},"author":[{"full_name":"Austermann, Johann","id":"42114","last_name":"Austermann","first_name":"Johann"},{"first_name":"Holger","last_name":"Borcherding","full_name":"Borcherding, Holger","id":"1693"},{"first_name":"H.","last_name":"Stichweh","full_name":"Stichweh, H."},{"first_name":"Volker","id":"58951","full_name":"Grabs, Volker","last_name":"Grabs"}],"year":2016,"status":"public","page":"1639-1646","type":"conference","user_id":"45673","place":"Berlin ; Offenbach","_id":"273","doi":"10.1109/EPE.2016.7695687","ddc":["620"],"conference":{"name":"18th European Conference on Power Electronics and Applications","location":"Karlsruhe","end_date":"2016-05-09","start_date":"2016-09-05"},"department":[{"_id":"DEP5018"}],"abstract":[{"text":"This paper introduces an efficient modular solution kit for intralogistic drives, which reduces the total energy consumption of all drives in an automated warehouse by more than 15%. The reduction of energy consumption results from the interaction of optimized components (motors, control techniques and regeneration units), which are described in detail in this paper. Different motor concepts like the induction motor, the synchronous reluctance motor and the permanent magnet synchronous machine are compared according to the special requirements for intralogistics applications. Different control techniques are presented in order to achieve sensorless and efficient-optimal operation of these motors. The sensorless control technique uses signal injection to detect the rotor position sufficiently exact also in case of speed near standstill. Efficient-optimal operation is achieved by reducing the motor current with regard to the torque (MTPA-control). Furthermore this paper introduces a regeneration unit that can be connected between the DC link of frequency inverters and the mains to feed back regenerative energy. The regeneration unit consisting of a buck converter, a synchronous inverter and a line-filter can work in parallel to commonly used uncontrolled rectifiers. Its functioning is shown with the help of measurement results of a 1kW laboratory prototype. The last section shows a demonstrator in which a conventional conveyer system (with induction motor and braking resistor) is compared with an optimized one using the presented components. Power versus time measurements show specific energy savings resulting from the interaction of the optimized components.","lang":"eng"}],"publisher":"VDE Verlag"},{"_id":"11142","doi":"10.1007/978-3-662-49158-4","keyword":["industrial wireless system","wireless real-time communication","deterministic medium access control","isochronous WLAN","industrial automation"],"place":"Berlin, Heidelberg","language":[{"iso":"eng"}],"user_id":"83781","date_updated":"2024-03-05T14:34:59Z","publication_identifier":{"eisbn":["978-3-662-49158-4"],"issn":["2522-8579 "],"isbn":["978-3-662-49157-7"],"eissn":["2522-8587"]},"type":"dissertation","date_created":"2024-03-01T08:09:01Z","publisher":"Springer ","status":"public","abstract":[{"lang":"eng","text":"This dissertation proposes and investigates an isochronous wireless network for industrial control applications with guaranteed latencies and jitter. Based on a requirements analysis of real industrial applications and the characterisation of the wireless channel, the solution approach is developed. It consists of a TDMA-based medium access control, a dynamic resource allocation and the provision of a global time base for the wired and the wireless network. Due to the global time base, the solution approach allows a seamless and synchronous integration into existing wired Real-time Ethernet systems."}],"author":[{"full_name":"Trsek, Henning","first_name":"Henning","last_name":"Trsek"}],"year":"2016","department":[{"_id":"DEP5023"}],"citation":{"ieee":"H. Trsek, Isochronous Wireless Network for Real-time Communication in Industrial Automation. Berlin, Heidelberg: Springer , 2016. doi: 10.1007/978-3-662-49158-4.","ama":"Trsek H. Isochronous Wireless Network for Real-Time Communication in Industrial Automation. Springer ; 2016. doi:10.1007/978-3-662-49158-4","chicago-de":"Trsek, Henning. 2016. Isochronous Wireless Network for Real-time Communication in Industrial Automation. Technologien für die intelligente Automation. Berlin, Heidelberg: Springer . doi:10.1007/978-3-662-49158-4, .","din1505-2-1":"Trsek, Henning: Isochronous Wireless Network for Real-time Communication in Industrial Automation, Technologien für die intelligente Automation. Berlin, Heidelberg : Springer , 2016","short":"H. Trsek, Isochronous Wireless Network for Real-Time Communication in Industrial Automation, Springer , Berlin, Heidelberg, 2016.","chicago":"Trsek, Henning. Isochronous Wireless Network for Real-Time Communication in Industrial Automation. Technologien Für Die Intelligente Automation. Berlin, Heidelberg: Springer , 2016. https://doi.org/10.1007/978-3-662-49158-4.","apa":"Trsek, H. (2016). Isochronous Wireless Network for Real-time Communication in Industrial Automation. Springer . https://doi.org/10.1007/978-3-662-49158-4","ufg":"Trsek, Henning: Isochronous Wireless Network for Real-time Communication in Industrial Automation, Berlin, Heidelberg 2016 (Technologien für die intelligente Automation).","mla":"Trsek, Henning. Isochronous Wireless Network for Real-Time Communication in Industrial Automation. Springer , 2016, https://doi.org/10.1007/978-3-662-49158-4.","bjps":"Trsek H (2016) Isochronous Wireless Network for Real-Time Communication in Industrial Automation. Berlin, Heidelberg: Springer .","havard":"H. Trsek, Isochronous Wireless Network for Real-time Communication in Industrial Automation, Springer , Berlin, Heidelberg, 2016.","van":"Trsek H. Isochronous Wireless Network for Real-time Communication in Industrial Automation. Berlin, Heidelberg: Springer ; 2016. (Technologien für die intelligente Automation)."},"publication_status":"published","title":"Isochronous Wireless Network for Real-time Communication in Industrial Automation","series_title":"Technologien für die intelligente Automation"},{"publication_status":"published","issue":"1","abstract":[{"lang":"eng","text":"This paper is aimed to discuss current research using data mining techniques and industry statistics in production environments. The general research approach is based on the idea of using data mining processes and techniques of industry statistics to find rare and hidden patterns behind failures of complex components. A case study will be applied to illustrate how the technique is carried out and where the limits of this approach occur. The case study deals with a component supplier of printing machines, which received an increasing number of client complaints, all related to one distinct problem. The observed failures seem to occur only among clients with very high quality standards. The affected component undergoes a very complex production process with several steps in different departments. Every single production unit records data information from multiple process variables and at different points in time. In the beginning there was no understanding of the failure causes in production at all. Therefore a huge amount of production data had to be analyzed to find the pattern that discloses the failure.\r\nThe data mining process starts with a first step in which the given data sets are prepared and then cleaned. Followed up by building a prediction model. The aim is to detect the root causes for failures and to predict potential failures in affected components. This paper shows how to use data mining to get the answer on pressing production failures.\r\n"}],"conference":{"name":"5th International Conference \"Production Engineering and Management\" ","location":"Trieste, Italy","end_date":"2015-10-02","start_date":"2015-10-01"},"department":[{"_id":"DEP7000"},{"_id":"DEP1306"}],"publisher":"Hochschule Ostwestfalen-Lippe","type":"conference","user_id":"83781","_id":"597","place":"Lemgo","title":"Data Mining: A Potential Detector to Find Failure in Complex Components","citation":{"ieee":"E. Scheideler and A. Ahlemeyer-Stubbe, “Data Mining: A Potential Detector to Find Failure in Complex Components,” in Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy, Trieste, Italy, 2015, no. 1, pp. 163–174.","ama":"Scheideler E, Ahlemeyer-Stubbe A. Data Mining: A Potential Detector to Find Failure in Complex Components. In: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy. Hochschule Ostwestfalen-Lippe; 2015:163-174.","chicago":"Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Data Mining: A Potential Detector to Find Failure in Complex Components.” In Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy, edited by Elio Padoano, Franz-Josef Villmer, Department of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, 163–74. Lemgo: Hochschule Ostwestfalen-Lippe, 2015.","apa":"Scheideler, E., & Ahlemeyer-Stubbe, A. (2015). Data Mining: A Potential Detector to Find Failure in Complex Components. In E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe (Eds.), Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy (Issue 1, pp. 163–174). Hochschule Ostwestfalen-Lippe.","bjps":"Scheideler E and Ahlemeyer-Stubbe A (2015) Data Mining: A Potential Detector to Find Failure in Complex Components. In Padoano E et al. (eds), Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy. Lemgo: Hochschule Ostwestfalen-Lippe, pp. 163–174.","mla":"Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Data Mining: A Potential Detector to Find Failure in Complex Components.” Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy, edited by Elio Padoano et al., no. 1, Hochschule Ostwestfalen-Lippe, 2015, pp. 163–74.","havard":"E. Scheideler, A. Ahlemeyer-Stubbe, Data Mining: A Potential Detector to Find Failure in Complex Components, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy, Hochschule Ostwestfalen-Lippe, Lemgo, 2015: pp. 163–174.","ufg":"Scheideler, Eva/Ahlemeyer-Stubbe, Andrea: Data Mining: A Potential Detector to Find Failure in Complex Components, in: Padoano, Elio u. a. (Hgg.): Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy, Lemgo 2015, S. 163–174.","van":"Scheideler E, Ahlemeyer-Stubbe A. Data Mining: A Potential Detector to Find Failure in Complex Components. In: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, editors. Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy. Lemgo: Hochschule Ostwestfalen-Lippe; 2015. p. 163–74.","chicago-de":"Scheideler, Eva und Andrea Ahlemeyer-Stubbe. 2015. Data Mining: A Potential Detector to Find Failure in Complex Components. In: Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy, hg. von Elio Padoano, Franz-Josef Villmer, Department of Production Engineering and Management, und Hochschule Ostwestfalen-Lippe, 163–174. Lemgo: Hochschule Ostwestfalen-Lippe.","din1505-2-1":"Scheideler, Eva ; Ahlemeyer-Stubbe, Andrea: Data Mining: A Potential Detector to Find Failure in Complex Components. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management ; Hochschule Ostwestfalen-Lippe (Hrsg.): Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy. Lemgo : Hochschule Ostwestfalen-Lippe, 2015, S. 163–174","short":"E. Scheideler, A. Ahlemeyer-Stubbe, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy, Hochschule Ostwestfalen-Lippe, Lemgo, 2015, pp. 163–174."},"year":"2015","main_file_link":[{"open_access":"1","url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf"}],"author":[{"last_name":"Scheideler","id":"61522","full_name":"Scheideler, Eva","first_name":"Eva"},{"last_name":"Ahlemeyer-Stubbe","full_name":"Ahlemeyer-Stubbe, Andrea","first_name":"Andrea"}],"status":"public","page":"163-174","publication":"Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy","publication_identifier":{"isbn":["978-3-941645-11-0"]},"date_created":"2019-02-19T07:15:57Z","corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"editor":[{"first_name":"Elio","full_name":"Padoano, Elio","last_name":"Padoano"},{"last_name":"Villmer","full_name":"Villmer, Franz-Josef","first_name":"Franz-Josef","id":"14290"}],"related_material":{"link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf","relation":"contains"}]},"date_updated":"2024-03-22T13:12:47Z","oa":"1","keyword":["Data mining","production failure","multi-variant analysis","multivariate process control","predictive modelling","case study"],"language":[{"iso":"eng"}]},{"page":"337-344","status":"public","publisher":"Springer","conference":{"start_date":"2007-09-17","end_date":"2007-09-19","location":"Linköping","name":"International IFIP TC 5, WG 5.7 Conference on Advances in Production Management Systems (APMS 2007)"},"year":2007,"author":[{"first_name":"Gert","full_name":"Zülch, Gert","last_name":"Zülch"},{"id":"71451","full_name":"Gamber, Thilo Gerhard","first_name":"Thilo Gerhard","last_name":"Gamber"},{"last_name":"Stock","first_name":"Patricia","full_name":"Stock, Patricia"}],"abstract":[{"lang":"eng","text":"Growing market demands on enterprises and the resulting challenges for their organization have been discussed for many years now. The flexibilty and mutability of an enterprise are thereby considered as a significant factor for success."}],"publication_status":"published","citation":{"ufg":"Zülch, Gert et. al. (2007): Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area, in: Jan Olhager/Fredrik Persson (Hgg.): Advances in Production Management Systems, New York, S. 337–344.","mla":"Zülch, Gert, et al. “Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area.” Advances in Production Management Systems, edited by Jan Olhager and Fredrik Persson, Springer, 2007, pp. 337–44.","bjps":"Zülch G, Gamber TG and Stock P (2007) Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area. In Olhager J and Persson F (eds), Advances in Production Management Systems. New York: Springer, pp. 337–344.","havard":"G. Zülch, T.G. Gamber, P. Stock, Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area, in: J. Olhager, F. Persson (Eds.), Advances in Production Management Systems, Springer, New York, 2007: pp. 337–344.","van":"Zülch G, Gamber TG, Stock P. Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area. In: Olhager J, Persson F, editors. Advances in Production Management Systems. New York: Springer; 2007. p. 337–44.","chicago":"Zülch, Gert, Thilo Gerhard Gamber, and Patricia Stock. “Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area.” In Advances in Production Management Systems, edited by Jan Olhager and Fredrik Persson, 337–44. New York: Springer, 2007.","apa":"Zülch, G., Gamber, T. G., & Stock, P. (2007). Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area. In J. Olhager & F. Persson (Eds.), Advances in Production Management Systems (pp. 337–344). New York: Springer.","chicago-de":"Zülch, Gert, Thilo Gerhard Gamber und Patricia Stock. 2007. Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area. In: Advances in Production Management Systems, hg. von Jan Olhager und Fredrik Persson, 337–344. New York: Springer.","din1505-2-1":"Zülch, Gert ; Gamber, Thilo Gerhard ; Stock, Patricia: Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area. In: Olhager, J. ; Persson, F. (Hrsg.): Advances in Production Management Systems. New York : Springer, 2007, S. 337–344","short":"G. Zülch, T.G. Gamber, P. Stock, in: J. Olhager, F. Persson (Eds.), Advances in Production Management Systems, Springer, New York, 2007, pp. 337–344.","ama":"Zülch G, Gamber TG, Stock P. Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area. In: Olhager J, Persson F, eds. Advances in Production Management Systems. New York: Springer; 2007:337-344.","ieee":"G. Zülch, T. G. Gamber, and P. Stock, “Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area,” in Advances in Production Management Systems, Linköping, 2007, pp. 337–344."},"extern":"1","title":"Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area","language":[{"iso":"eng"}],"place":"New York","keyword":["production planning and control","decision-making system","personnel-oriented simulation"],"_id":"486","date_updated":"2023-03-15T13:49:56Z","user_id":"74004","editor":[{"full_name":"Olhager, Jan","last_name":"Olhager","first_name":"Jan"},{"last_name":"Persson","first_name":"Fredrik","full_name":"Persson, Fredrik"}],"date_created":"2019-01-30T07:51:48Z","type":"conference","publication_identifier":{"isbn":["978-0-387-74157-4"]},"publication":"Advances in Production Management Systems"},{"abstract":[{"lang":"eng","text":"In this paper, we present the Smart Dice Cup, a novel interaction device aimed at gaming applications in smart home environments. The Smart Dice Cup is used in a similar way as a traditional leather dice cup to generate random numbers. Integrated accelerometers relate the shaking of the device to the resulting rolls of the dice. In addition to an autonomous stand-alone mode, where the Smart Dice Cup serves as self-sustained gaming system, the device is also capable of communicating with its surrounding environment serving as an input device for other pervasive gaming applications."}],"department":[{"_id":"DEP5023"}],"conference":{"location":"Cambridge, UK","name":"5th International Conference - ICEC 2006","end_date":"2006-09-22","start_date":"2006-09-20"},"publisher":"Springer","series_title":"Lecture Notes in Computer Science","publication_status":"published","_id":"4814","doi":"10.1007/11872320_25","place":"Berlin","type":"conference","user_id":"15514","main_file_link":[{"open_access":"1"}],"author":[{"first_name":"Carsten","last_name":"Magerkurth","full_name":"Magerkurth, Carsten"},{"last_name":"Engelke","first_name":"Timo","id":"75196","full_name":"Engelke, Timo"},{"last_name":"Röcker","id":"61525","full_name":"Röcker, Carsten","first_name":"Carsten"}],"year":2006,"status":"public","page":"211-216","title":"The Smart Dice Cup: A Radio Controlled Sentient Interaction Device","extern":"1","citation":{"van":"Magerkurth C, Engelke T, Röcker C. The Smart Dice Cup: A Radio Controlled Sentient Interaction Device. In: Harper R, Rauterberg M, Combetto M, editors. Entertainment Computing - ICEC 2006. Berlin: Springer; 2006. p. 211–6. (Lecture Notes in Computer Science).","ufg":"Magerkurth, Carsten et. al. (2006): The Smart Dice Cup: A Radio Controlled Sentient Interaction Device, in: Richard Harper et. al. (Hgg.): Entertainment Computing - ICEC 2006 (=Lecture Notes in Computer Science), Berlin, S. 211–216.","mla":"Magerkurth, Carsten, et al. “The Smart Dice Cup: A Radio Controlled Sentient Interaction Device.” Entertainment Computing - ICEC 2006, edited by Richard Harper et al., Springer, 2006, pp. 211–16, doi:10.1007/11872320_25.","havard":"C. Magerkurth, T. Engelke, C. Röcker, The Smart Dice Cup: A Radio Controlled Sentient Interaction Device, in: R. Harper, M. Rauterberg, M. Combetto (Eds.), Entertainment Computing - ICEC 2006, Springer, Berlin, 2006: pp. 211–216.","bjps":"Magerkurth C, Engelke T and Röcker C (2006) The Smart Dice Cup: A Radio Controlled Sentient Interaction Device. In Harper R, Rauterberg M and Combetto M (eds), Entertainment Computing - ICEC 2006. Berlin: Springer, pp. 211–216.","apa":"Magerkurth, C., Engelke, T., & Röcker, C. (2006). The Smart Dice Cup: A Radio Controlled Sentient Interaction Device. In R. Harper, M. Rauterberg, & M. Combetto (Eds.), Entertainment Computing - ICEC 2006 (pp. 211–216). Berlin: Springer. https://doi.org/10.1007/11872320_25","chicago":"Magerkurth, Carsten, Timo Engelke, and Carsten Röcker. “The Smart Dice Cup: A Radio Controlled Sentient Interaction Device.” In Entertainment Computing - ICEC 2006, edited by Richard Harper, Matthias Rauterberg, and Marco Combetto, 211–16. Lecture Notes in Computer Science. Berlin: Springer, 2006. https://doi.org/10.1007/11872320_25.","short":"C. Magerkurth, T. Engelke, C. Röcker, in: R. Harper, M. Rauterberg, M. Combetto (Eds.), Entertainment Computing - ICEC 2006, Springer, Berlin, 2006, pp. 211–216.","chicago-de":"Magerkurth, Carsten, Timo Engelke und Carsten Röcker. 2006. The Smart Dice Cup: A Radio Controlled Sentient Interaction Device. In: Entertainment Computing - ICEC 2006, hg. von Richard Harper, Matthias Rauterberg, und Marco Combetto, 211–216. Lecture Notes in Computer Science. Berlin: Springer. doi:10.1007/11872320_25, .","din1505-2-1":"Magerkurth, Carsten ; Engelke, Timo ; Röcker, Carsten: The Smart Dice Cup: A Radio Controlled Sentient Interaction Device. In: Harper, R. ; Rauterberg, M. ; Combetto, M. (Hrsg.): Entertainment Computing - ICEC 2006, Lecture Notes in Computer Science. Berlin : Springer, 2006, S. 211–216","ama":"Magerkurth C, Engelke T, Röcker C. The Smart Dice Cup: A Radio Controlled Sentient Interaction Device. In: Harper R, Rauterberg M, Combetto M, eds. Entertainment Computing - ICEC 2006. Lecture Notes in Computer Science. Berlin: Springer; 2006:211-216. doi:10.1007/11872320_25","ieee":"C. Magerkurth, T. Engelke, and C. Röcker, “The Smart Dice Cup: A Radio Controlled Sentient Interaction Device,” in Entertainment Computing - ICEC 2006, Cambridge, UK, 2006, pp. 211–216."},"oa":"1","keyword":["Interaction Device","Smart Home Environment","Pervasive Game","Remote Control Mode","Ambient Intelligence Environment"],"language":[{"iso":"eng"}],"publication":"Entertainment Computing - ICEC 2006","publication_identifier":{"isbn":["978-3-540-45259-1"]},"date_created":"2021-02-02T09:58:10Z","editor":[{"full_name":"Harper, Richard","first_name":"Richard","last_name":"Harper"},{"first_name":"Matthias ","last_name":"Rauterberg","full_name":"Rauterberg, Matthias "},{"last_name":"Combetto","first_name":"Marco ","full_name":"Combetto, Marco "}],"date_updated":"2023-03-15T13:49:55Z"},{"type":"conference","user_id":"15514","_id":"4815","doi":"10.1049/cp:20060623","place":"London","publication_status":"published","abstract":[{"text":"In this paper a concept is presented, that supports awareness and emotional communication between family members, distributed over multiple intelligent home environments. A technical communication infrastructure is presented, which allows connecting different types of input and output devices. This platform is extended by several examples of emotional user interfaces, which address the individual needs of different user groups","lang":"eng"}],"department":[{"_id":"DEP5023"}],"conference":{"name":"2nd IET International Conference on Intelligent Environments (IE 06)","location":"Athens, Greece","start_date":"2006-05-07","end_date":"2006-07-06"},"publisher":"IET","publication":"Proceedings of the Second International Conference on Intelligent Environments (IE’06)","publication_identifier":{"isbn":["978-0-86341-663-7"],"issn":["0537-9989"]},"date_created":"2021-02-02T09:59:30Z","date_updated":"2023-03-15T13:49:55Z","related_material":{"link":[{"relation":"research_paper","url":"https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwifnf-rhM7uAhWNO-wKHVa-BTAQFjAAegQIBRAC&url=http%3A%2F%2Fciteseerx.ist.psu.edu%2Fviewdoc%2Fdownload%3Fdoi%3D10.1.1.906.2354%26rep%3Drep1%26type%3Dpdf&usg=AOvVaw1oXsq3u2JITo6fIzezp0sI"}]},"oa":"1","keyword":["User interfaces","Home computing","Automated buildings","Control engineering computing"],"language":[{"iso":"eng"}],"title":"Supporting Emotional Communication between Multiple Users in Intelligent Home Environments","extern":"1","citation":{"ieee":"R. Etter, C. Röcker, and D. Gilgen, “Supporting Emotional Communication between Multiple Users in Intelligent Home Environments,” in Proceedings of the Second International Conference on Intelligent Environments (IE’06), Athens, Greece, 2006, pp. 41–50.","ama":"Etter R, Röcker C, Gilgen D. Supporting Emotional Communication between Multiple Users in Intelligent Home Environments. In: Proceedings of the Second International Conference on Intelligent Environments (IE’06). London: IET; 2006:41-50. doi:10.1049/cp:20060623","chicago-de":"Etter, Richard, Carsten Röcker und Daniel Gilgen. 2006. Supporting Emotional Communication between Multiple Users in Intelligent Home Environments. In: Proceedings of the Second International Conference on Intelligent Environments (IE’06), 41–50. London: IET. doi:10.1049/cp:20060623, .","din1505-2-1":"Etter, Richard ; Röcker, Carsten ; Gilgen, Daniel: Supporting Emotional Communication between Multiple Users in Intelligent Home Environments. In: Proceedings of the Second International Conference on Intelligent Environments (IE’06). London : IET, 2006, S. 41–50","short":"R. Etter, C. Röcker, D. Gilgen, in: Proceedings of the Second International Conference on Intelligent Environments (IE’06), IET, London, 2006, pp. 41–50.","chicago":"Etter, Richard, Carsten Röcker, and Daniel Gilgen. “Supporting Emotional Communication between Multiple Users in Intelligent Home Environments.” In Proceedings of the Second International Conference on Intelligent Environments (IE’06), 41–50. London: IET, 2006. https://doi.org/10.1049/cp:20060623.","apa":"Etter, R., Röcker, C., & Gilgen, D. (2006). Supporting Emotional Communication between Multiple Users in Intelligent Home Environments. In Proceedings of the Second International Conference on Intelligent Environments (IE’06) (pp. 41–50). London: IET. https://doi.org/10.1049/cp:20060623","havard":"R. Etter, C. Röcker, D. Gilgen, Supporting Emotional Communication between Multiple Users in Intelligent Home Environments, in: Proceedings of the Second International Conference on Intelligent Environments (IE’06), IET, London, 2006: pp. 41–50.","bjps":"Etter R, Röcker C and Gilgen D (2006) Supporting Emotional Communication between Multiple Users in Intelligent Home Environments. Proceedings of the Second International Conference on Intelligent Environments (IE’06). London: IET, pp. 41–50.","mla":"Etter, Richard, et al. “Supporting Emotional Communication between Multiple Users in Intelligent Home Environments.” Proceedings of the Second International Conference on Intelligent Environments (IE’06), IET, 2006, pp. 41–50, doi:10.1049/cp:20060623.","ufg":"Etter, Richard et. al. (2006): Supporting Emotional Communication between Multiple Users in Intelligent Home Environments, in: Proceedings of the Second International Conference on Intelligent Environments (IE’06), London, S. 41–50.","van":"Etter R, Röcker C, Gilgen D. Supporting Emotional Communication between Multiple Users in Intelligent Home Environments. In: Proceedings of the Second International Conference on Intelligent Environments (IE’06). London: IET; 2006. p. 41–50."},"year":2006,"main_file_link":[{"open_access":"1"}],"author":[{"last_name":"Etter","first_name":"Richard","full_name":"Etter, Richard"},{"last_name":"Röcker","first_name":"Carsten","full_name":"Röcker, Carsten","id":"61525"},{"last_name":"Gilgen","full_name":"Gilgen, Daniel","first_name":"Daniel"}],"status":"public","page":"41-50"},{"volume":38,"citation":{"bjps":"Streitz N et al. (2005) Designing Smart Artifacts for Smart Environments. Computer : innovative technology for computer professionals 38, 41 – 49.","havard":"N. Streitz, C. Röcker, T. Prante, D. van Alphen, R. Stenzel, C. Magerkurth, Designing Smart Artifacts for Smart Environments, Computer : Innovative Technology for Computer Professionals . 38 (2005) 41 – 49.","mla":"Streitz, Norbert, et al. “Designing Smart Artifacts for Smart Environments.” Computer : Innovative Technology for Computer Professionals , vol. 38, no. 3, IEEE, 2005, pp. 41 – 49, doi:10.1109/MC.2005.92.","ufg":"Streitz, Norbert et. al. (2005): Designing Smart Artifacts for Smart Environments, in: Computer : innovative technology for computer professionals 38 (3), S. 41 – 49.","van":"Streitz N, Röcker C, Prante T, van Alphen D, Stenzel R, Magerkurth C. Designing Smart Artifacts for Smart Environments. Computer : innovative technology for computer professionals . 2005;38(3):41 – 49.","chicago":"Streitz, Norbert, Carsten Röcker, Thorsten Prante, Daniel van Alphen, Richard Stenzel, and Carsten Magerkurth. “Designing Smart Artifacts for Smart Environments.” Computer : Innovative Technology for Computer Professionals 38, no. 3 (2005): 41 – 49. https://doi.org/10.1109/MC.2005.92.","apa":"Streitz, N., Röcker, C., Prante, T., van Alphen, D., Stenzel, R., & Magerkurth, C. (2005). Designing Smart Artifacts for Smart Environments. Computer : Innovative Technology for Computer Professionals , 38(3), 41 – 49. https://doi.org/10.1109/MC.2005.92","chicago-de":"Streitz, Norbert, Carsten Röcker, Thorsten Prante, Daniel van Alphen, Richard Stenzel und Carsten Magerkurth. 2005. Designing Smart Artifacts for Smart Environments. Computer : innovative technology for computer professionals 38, Nr. 3: 41 – 49. doi:10.1109/MC.2005.92, .","din1505-2-1":"Streitz, Norbert ; Röcker, Carsten ; Prante, Thorsten ; van Alphen, Daniel ; Stenzel, Richard ; Magerkurth, Carsten: Designing Smart Artifacts for Smart Environments. In: Computer : innovative technology for computer professionals Bd. 38. Piscataway, NJ, IEEE (2005), Nr. 3, S. 41 – 49","short":"N. Streitz, C. Röcker, T. Prante, D. van Alphen, R. Stenzel, C. Magerkurth, Computer : Innovative Technology for Computer Professionals 38 (2005) 41 – 49.","ama":"Streitz N, Röcker C, Prante T, van Alphen D, Stenzel R, Magerkurth C. Designing Smart Artifacts for Smart Environments. Computer : innovative technology for computer professionals . 2005;38(3):41 – 49. doi:10.1109/MC.2005.92","ieee":"N. Streitz, C. Röcker, T. Prante, D. van Alphen, R. Stenzel, and C. Magerkurth, “Designing Smart Artifacts for Smart Environments,” Computer : innovative technology for computer professionals , vol. 38, no. 3, pp. 41 – 49, 2005."},"title":"Designing Smart Artifacts for Smart Environments","extern":"1","status":"public","page":"41 – 49","author":[{"last_name":"Streitz","full_name":"Streitz, Norbert","first_name":"Norbert"},{"id":"61525","full_name":"Röcker, Carsten","first_name":"Carsten","last_name":"Röcker"},{"full_name":"Prante, Thorsten","first_name":"Thorsten","last_name":"Prante"},{"first_name":"Daniel","full_name":"van Alphen, Daniel","last_name":"van Alphen"},{"first_name":"Richard","full_name":"Stenzel, Richard","last_name":"Stenzel"},{"first_name":"Carsten","last_name":"Magerkurth","full_name":"Magerkurth, Carsten"}],"main_file_link":[{"open_access":"1"}],"year":2005,"date_updated":"2023-03-15T13:49:56Z","publication":"Computer : innovative technology for computer professionals ","publication_identifier":{"issn":["0018-9162 "],"eissn":["1558-0814 "]},"date_created":"2021-02-02T10:09:09Z","keyword":["Personal digital assistants","Refrigeration","Portable computers","Control systems","Roads","Availability","Cellular phones","Communications technology","Humans","Smart homes"],"language":[{"iso":"eng"}],"oa":"1","publication_status":"published","publisher":"IEEE","department":[{"_id":"DEP5023"}],"abstract":[{"text":"The integration of information, communication, and sensing technologies into our everyday objects has created smart environments. Creating the smart artifacts that constitute these environments requires augmenting their standard functionality to support a new quality of interaction and behavior.A system-oriented, importunate smartness approach creates an environment that gives individual smart artifacts or the environment itself certain self-directed actions based on previously collected information. For example, a space can be smart by having and exploiting knowledge about the persons and artifacts currently situated within its borders.In contrast, a people-oriented, empowering smartness approach places the empowering function in the foreground by assuming that smart spaces make people smarter. This approach empowers users to make decisions and take actions as mature and responsible people.Although in some cases it might be more efficient if the system doesnýt ask for a userýs feedback and confirmation at every step in an action chain, the overall design rationale should aim to keep the user in the loop and in control whenever possible.","lang":"eng"}],"issue":"3","user_id":"15514","intvolume":" 38","type":"journal_article","place":"Piscataway, NJ","_id":"4824","doi":"10.1109/MC.2005.92"}]