---
_id: '12790'
abstract:
- lang: eng
text: n the last years, Additive Manufacturing, thanks to its capability of continuous
improvements in performance and cost-efficiency, was able to partly replace and
redefine well-established manufacturing processes. This research is based on the
idea to achieve great cost and operational benefits especially in the field of
tool making for injection molding by combining traditional and additive manufacturing
in one process chain. Special attention is given to the surface quality in terms
of surface roughness and its optimization directly in the Selective Laser Melting
process. This article presents the possibility for a remelting process of the
SLM parts as a way to optimize the surfaces of the produced parts. The influence
of laser remelting on the surface roughness of the parts is analyzed while varying
machine parameters like laser power and scan settings. Laser remelting with optimized
parameter settings considerably improves the surface quality of SLM parts and
is a great starting point for further post-processing techniques, which require
a low initial value of surface roughness.
author:
- first_name: Filippo
full_name: Simoni, Filippo
last_name: Simoni
- first_name: Andrea
full_name: Huxol, Andrea
id: '43559'
last_name: Huxol
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
id: '14290'
last_name: Villmer
citation:
ama: Simoni F, Huxol A, Villmer FJ. Improving surface quality in selective laser
melting based tool making. Journal of Intelligent Manufacturing. 2021;32(7):1927-1938.
doi:10.1007/s10845-021-01744-9
apa: Simoni, F., Huxol, A., & Villmer, F.-J. (2021). Improving surface quality
in selective laser melting based tool making. Journal of Intelligent Manufacturing,
32(7), 1927–1938. https://doi.org/10.1007/s10845-021-01744-9
bjps: Simoni F, Huxol A and Villmer F-J (2021) Improving Surface Quality
in Selective Laser Melting Based Tool Making. Journal of Intelligent Manufacturing
32, 1927–1938.
chicago: 'Simoni, Filippo, Andrea Huxol, and Franz-Josef Villmer. “Improving Surface
Quality in Selective Laser Melting Based Tool Making.” Journal of Intelligent
Manufacturing 32, no. 7 (2021): 1927–38. https://doi.org/10.1007/s10845-021-01744-9.'
chicago-de: 'Simoni, Filippo, Andrea Huxol und Franz-Josef Villmer. 2021. Improving
surface quality in selective laser melting based tool making. Journal of Intelligent
Manufacturing 32, Nr. 7: 1927–1938. doi:10.1007/s10845-021-01744-9,
.'
din1505-2-1: 'Simoni, Filippo ; Huxol, Andrea ; Villmer,
Franz-Josef: Improving surface quality in selective laser melting based
tool making. In: Journal of Intelligent Manufacturing Bd. 32. Dordrecht
[u.a.], Springer Science and Business Media (2021), Nr. 7, S. 1927–1938'
havard: F. Simoni, A. Huxol, F.-J. Villmer, Improving surface quality in selective
laser melting based tool making, Journal of Intelligent Manufacturing. 32 (2021)
1927–1938.
ieee: 'F. Simoni, A. Huxol, and F.-J. Villmer, “Improving surface quality in selective
laser melting based tool making,” Journal of Intelligent Manufacturing,
vol. 32, no. 7, pp. 1927–1938, 2021, doi: 10.1007/s10845-021-01744-9.'
mla: Simoni, Filippo, et al. “Improving Surface Quality in Selective Laser Melting
Based Tool Making.” Journal of Intelligent Manufacturing, vol. 32, no.
7, 2021, pp. 1927–38, https://doi.org/10.1007/s10845-021-01744-9.
short: F. Simoni, A. Huxol, F.-J. Villmer, Journal of Intelligent Manufacturing
32 (2021) 1927–1938.
ufg: 'Simoni, Filippo/Huxol, Andrea/Villmer, Franz-Josef: Improving surface
quality in selective laser melting based tool making, in: Journal of Intelligent
Manufacturing 32 (2021), H. 7, S. 1927–1938.'
van: Simoni F, Huxol A, Villmer FJ. Improving surface quality in selective laser
melting based tool making. Journal of Intelligent Manufacturing. 2021;32(7):1927–38.
date_created: 2025-04-15T09:17:22Z
date_updated: 2025-06-26T13:41:37Z
department:
- _id: DEP7000
doi: 10.1007/s10845-021-01744-9
external_id:
isi:
- '000636136100001'
intvolume: ' 32'
isi: '1'
issue: '7'
keyword:
- Direct rapid tooling
- Toolmaking
- Additive manufacturing process chain
- Process control
- Production systems
- Selective laser melting
- Surface roughness
- Laser surface remelting
language:
- iso: eng
page: 1927-1938
place: Dordrecht [u.a.]
publication: Journal of Intelligent Manufacturing
publication_identifier:
eissn:
- 1572-8145
issn:
- 0956-5515
publication_status: published
publisher: Springer Science and Business Media
status: public
title: Improving surface quality in selective laser melting based tool making
type: scientific_journal_article
user_id: '83781'
volume: 32
year: '2021'
...
---
_id: '7890'
abstract:
- lang: eng
text: 'The purpose of this paper is to convey a thorough understanding of the governance-related
determinants and financial consequences of carbon performance and disclosure.
Its motivation lies in the increasing global political, social, academic as well
as practical importance of managing and reporting on carbon-related issues. Methodologically,
we employ a systematic literature review. Thus, we identify 73 quantitative peer-reviewed
empirical studies in this field and categorize them according to a legitimacy-theory-based
framework. Our four main contributions offer new insights into this emerging research
field and provide guidance for the development of new research models: First,
we help future researchers to structure this emerging field of research with respect
to the interactions of the phenomenon itself (carbon performance vs. disclosure),
its determinants (country- and firm-related governance), and its financial consequences
(value relevance, information asymmetry, financial performance, and cost of capital).
Second, we provide a comprehensive overview of variables and proxies used in the
studies and list their main statistical effects, which facilitates building novel
models. There are indications that 1) board composition positively influences
both carbon performance and disclosure, 2) carbon performance and carbon disclosure
are positively connected, 3) carbon disclosure reduces information asymmetry,
and 4) carbon performance increases financial performance. Third, we develop a
research agenda with concise suggestions for future studies. Fourth, we argue
that due to the under-theorization of concepts the comparability of included studies
is challenging, this research field may be characterized as a vibrant field for
extensive future research. (C) 2020 Elsevier Ltd. All rights reserved.'
article_number: '120063'
author:
- first_name: Patrick
full_name: Velte, Patrick
last_name: Velte
- first_name: Martin
full_name: Stawinoga, Martin
id: '68681'
last_name: Stawinoga
- first_name: Rainer
full_name: Lueg, Rainer
last_name: Lueg
citation:
ama: 'Velte P, Stawinoga M, Lueg R. Carbon performance and disclosure: A systematic
review of governance-related determinants and financial consequences. Journal
of Cleaner Production. 2020;254. doi:10.1016/j.jclepro.2020.120063'
apa: 'Velte, P., Stawinoga, M., & Lueg, R. (2020). Carbon performance and disclosure:
A systematic review of governance-related determinants and financial consequences.
Journal of Cleaner Production, 254, Article 120063. https://doi.org/10.1016/j.jclepro.2020.120063'
bjps: 'Velte P, Stawinoga M and Lueg R (2020) Carbon Performance and Disclosure:
A Systematic Review of Governance-Related Determinants and Financial Consequences.
Journal of Cleaner Production 254.'
chicago: 'Velte, Patrick, Martin Stawinoga, and Rainer Lueg. “Carbon Performance
and Disclosure: A Systematic Review of Governance-Related Determinants and Financial
Consequences.” Journal of Cleaner Production 254 (2020). https://doi.org/10.1016/j.jclepro.2020.120063.'
chicago-de: 'Velte, Patrick, Martin Stawinoga und Rainer Lueg. 2020. Carbon performance
and disclosure: A systematic review of governance-related determinants and financial
consequences. Journal of Cleaner Production 254. doi:10.1016/j.jclepro.2020.120063,
.'
din1505-2-1: 'Velte, Patrick ; Stawinoga, Martin ; Lueg,
Rainer: Carbon performance and disclosure: A systematic review of governance-related
determinants and financial consequences. In: Journal of Cleaner Production
Bd. 254. Amsterdam [u.a.], Elsevier (2020)'
havard: 'P. Velte, M. Stawinoga, R. Lueg, Carbon performance and disclosure: A systematic
review of governance-related determinants and financial consequences, Journal
of Cleaner Production. 254 (2020).'
ieee: 'P. Velte, M. Stawinoga, and R. Lueg, “Carbon performance and disclosure:
A systematic review of governance-related determinants and financial consequences,”
Journal of Cleaner Production, vol. 254, Art. no. 120063, 2020, doi: 10.1016/j.jclepro.2020.120063.'
mla: 'Velte, Patrick, et al. “Carbon Performance and Disclosure: A Systematic Review
of Governance-Related Determinants and Financial Consequences.” Journal of
Cleaner Production, vol. 254, 120063, 2020, https://doi.org/10.1016/j.jclepro.2020.120063.'
short: P. Velte, M. Stawinoga, R. Lueg, Journal of Cleaner Production 254 (2020).
ufg: 'Velte, Patrick/Stawinoga, Martin/Lueg, Rainer: Carbon performance and
disclosure: A systematic review of governance-related determinants and financial
consequences, in: Journal of Cleaner Production 254 (2020).'
van: 'Velte P, Stawinoga M, Lueg R. Carbon performance and disclosure: A systematic
review of governance-related determinants and financial consequences. Journal
of Cleaner Production. 2020;254.'
date_created: 2022-05-03T06:22:51Z
date_updated: 2025-06-26T13:27:09Z
department:
- _id: DEP1507
doi: 10.1016/j.jclepro.2020.120063
external_id:
isi:
- '000518890800021'
intvolume: ' 254'
isi: '1'
jel:
- M41
keyword:
- Carbon performance
- Carbon disclosure
- Corporate governance
- Management control
- Financial performance
- Legitimacy theory
language:
- iso: eng
place: ' Amsterdam [u.a.]'
publication: Journal of Cleaner Production
publication_identifier:
eissn:
- 1879-1786
issn:
- 0959-6526
publication_status: published
publisher: Elsevier
quality_controlled: '1'
status: public
title: 'Carbon performance and disclosure: A systematic review of governance-related
determinants and financial consequences'
type: scientific_journal_article
user_id: '83781'
volume: 254
year: '2020'
...
---
_id: '4851'
abstract:
- lang: ger
text: "In diesem Open-Access-Tagungsband sind die besten Beiträge des 9. Jahreskolloquiums
\"Kommunikation in der Automation\" (KommA 2018) und des 6. Jahreskolloquiums
\"Bildverarbeitung in der Automation\" (BVAu 2018) enthalten. Die Kolloquien fanden
am 20. und 21. November 2018 in der SmartFactoryOWL, einer gemeinsamen Einrichtung
des Fraunhofer IOSB-INA und der Technischen Hochschule Ostwestfalen-Lippe statt.\r\nDie
vorgestellten neuesten Forschungsergebnisse auf den Gebieten der industriellen
Kommunikationstechnik und Bildverarbeitung erweitern den aktuellen Stand der Forschung
und Technik. Die in den Beiträgen enthaltenen anschaulichen Beispiele aus dem
Bereich der Automation setzen die Ergebnisse in den direkten Anwendungsbezug."
citation:
ama: 'Jasperneite J, Lohweg V, eds. Kommunikation und Bildverarbeitung in der
Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018.
Vol 12. Springer Vieweg; 2020. doi:https://doi.org/10.1007/978-3-662-59895-5'
apa: 'Jasperneite, J., & Lohweg, V. (Eds.). (2020). Kommunikation und Bildverarbeitung
in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018
(Vol. 12). Springer Vieweg. https://doi.org/10.1007/978-3-662-59895-5'
bjps: 'Jasperneite J and Lohweg V (eds) (2020) Kommunikation und Bildverarbeitung
in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018.
Berlin, Heidelberg: Springer Vieweg.'
chicago: 'Jasperneite, Jürgen, and Volker Lohweg, eds. Kommunikation und Bildverarbeitung
in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018.
Vol. 12. Technologien für die intelligente Automation. Berlin, Heidelberg: Springer
Vieweg, 2020. https://doi.org/10.1007/978-3-662-59895-5.'
chicago-de: 'Jasperneite, Jürgen und Volker Lohweg, Hrsg. 2020. Kommunikation
und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien
KommA und BVAu 2018. Bd. 12. Technologien für die intelligente Automation.
Berlin, Heidelberg: Springer Vieweg. doi:https://doi.org/10.1007/978-3-662-59895-5,
.'
din1505-2-1: 'Jasperneite, J. ; Lohweg, V. (Hrsg.): Kommunikation und
Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien
KommA und BVAu 2018, Technologien für die intelligente Automation.
Bd. 12. Berlin, Heidelberg : Springer Vieweg, 2020'
havard: 'J. Jasperneite, V. Lohweg, eds., Kommunikation und Bildverarbeitung in
der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018,
Springer Vieweg, Berlin, Heidelberg, 2020.'
ieee: 'J. Jasperneite and V. Lohweg, Eds., Kommunikation und Bildverarbeitung
in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018,
vol. 12. Berlin, Heidelberg: Springer Vieweg, 2020. doi: https://doi.org/10.1007/978-3-662-59895-5.'
mla: 'Jasperneite, Jürgen, and Volker Lohweg, editors. Kommunikation und Bildverarbeitung
in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018.
Springer Vieweg, 2020, https://doi.org/10.1007/978-3-662-59895-5.'
short: 'J. Jasperneite, V. Lohweg, eds., Kommunikation und Bildverarbeitung in der
Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018, Springer
Vieweg, Berlin, Heidelberg, 2020.'
ufg: 'Jasperneite, Jürgen/Lohweg, Volker: Kommunikation und Bildverarbeitung
in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018,
Bd. 12, Berlin, Heidelberg 2020 ( Technologien für die intelligente Automation).'
van: 'Jasperneite J, Lohweg V, editors. Kommunikation und Bildverarbeitung in der
Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018. Berlin,
Heidelberg: Springer Vieweg; 2020. 364 p. ( Technologien für die intelligente
Automation; vol. 12).'
conference:
end_date: 20218-11-21
location: Lemgo
name: 9. Jahreskolloquiums "Kommunikation in der Automation" (KommA 2018) / 6. Jahreskolloquiums
"Bildverarbeitung in der Automation" (BVAu 2018)
start_date: 2018-11-20
date_created: 2021-02-02T13:12:47Z
date_updated: 2025-05-12T08:07:26Z
department:
- _id: DEP5023
- _id: DEP5019
doi: https://doi.org/10.1007/978-3-662-59895-5
editor:
- first_name: Jürgen
full_name: Jasperneite, Jürgen
id: '1899'
last_name: Jasperneite
- first_name: Volker
full_name: Lohweg, Volker
id: '1804'
last_name: Lohweg
orcid: 0000-0002-3325-7887
intvolume: ' 12'
keyword:
- Industrielle Kommunikationstechnik Industrielle Bildverarbeitung Network reliability
and redundancy methods Networked Control Systems Wireless real-time communication
Open Access quality control
- reliability
- safety and risk
language:
- iso: ger
main_file_link:
- open_access: '1'
url: https://link.springer.com/book/10.1007/978-3-662-59895-5?page=2#about
oa: '1'
page: '364'
place: Berlin, Heidelberg
publication_identifier:
eisbn:
- 978-3-662-59895-5
eissn:
- 2522-8587
isbn:
- 978-3-662-59894-8
issn:
- 2522-8579
publication_status: published
publisher: Springer Vieweg
series_title: ' Technologien für die intelligente Automation'
status: public
title: 'Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge
der Jahreskolloquien KommA und BVAu 2018'
type: book_editor
user_id: '83781'
volume: 12
year: '2020'
...
---
_id: '12791'
abstract:
- lang: eng
text: Additive manufacturing is being increasingly focused on the production of
end-use parts. Compared to the prototyping application, the production of end-use
parts demands a higher level of repeatability and process quality. To achieve
this, increased knowledge is required about the influence of various process parameters
on the part characteristics and the parameter interrelations. Design of Experiment
methods can be applied to gain knowledge on the process behavior, but the applicability
of different DoE methods for AM processes has to be validated. This paper describes
the application of a definitive screening design for the identification of influencing
parameters in Selective Laser Melting. The experimental setup and results are
described and opportunities and limitations of the method are discussed. (C) 2019,
IFAC (International Federation of Automatic Control) Hosting by Elsevier Ltd.
All rights reserved.
author:
- first_name: Andrea
full_name: Huxol, Andrea
id: '43559'
last_name: Huxol
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
id: '14290'
last_name: Villmer
citation:
ama: Huxol A, Villmer FJ. DoE Methods for Parameter Evaluation in Selective Laser
Melting. Vol 52. Elsevier BV; 2019:270-275. doi:10.1016/j.ifacol.2019.10.041
apa: Huxol, A., & Villmer, F.-J. (2019). DoE Methods for Parameter Evaluation
in Selective Laser Melting. In 13th International-Federation-of-Automatic-Control
(IFAC) Workshop on Intelligent Manufacturing Systems (IMS) (Vol. 52, pp. 270–275).
Elsevier BV. https://doi.org/10.1016/j.ifacol.2019.10.041
bjps: 'Huxol A and Villmer F-J (2019) DoE Methods for Parameter Evaluation
in Selective Laser Melting. Amsterdam [u.a.]: Elsevier BV.'
chicago: 'Huxol, Andrea, and Franz-Josef Villmer. DoE Methods for Parameter Evaluation
in Selective Laser Melting. 13th International-Federation-of-Automatic-Control
(IFAC) Workshop on Intelligent Manufacturing Systems (IMS). Vol. 52. IFAC-PapersOnLine.
Amsterdam [u.a.]: Elsevier BV, 2019. https://doi.org/10.1016/j.ifacol.2019.10.041.'
chicago-de: 'Huxol, Andrea und Franz-Josef Villmer. 2019. DoE Methods for Parameter
Evaluation in Selective Laser Melting. 13th International-Federation-of-Automatic-Control
(IFAC) Workshop on Intelligent Manufacturing Systems (IMS). Bd. 52. IFAC-PapersOnLine.
Amsterdam [u.a.]: Elsevier BV. doi:10.1016/j.ifacol.2019.10.041,
.'
din1505-2-1: 'Huxol, Andrea ; Villmer, Franz-Josef: DoE Methods for
Parameter Evaluation in Selective Laser Melting, IFAC-PapersOnLine.
Bd. 52. Amsterdam [u.a.] : Elsevier BV, 2019'
havard: A. Huxol, F.-J. Villmer, DoE Methods for Parameter Evaluation in Selective
Laser Melting, Elsevier BV, Amsterdam [u.a.], 2019.
ieee: 'A. Huxol and F.-J. Villmer, DoE Methods for Parameter Evaluation in Selective
Laser Melting, vol. 52. Amsterdam [u.a.]: Elsevier BV, 2019, pp. 270–275.
doi: 10.1016/j.ifacol.2019.10.041.'
mla: Huxol, Andrea, and Franz-Josef Villmer. “DoE Methods for Parameter Evaluation
in Selective Laser Melting.” 13th International-Federation-of-Automatic-Control
(IFAC) Workshop on Intelligent Manufacturing Systems (IMS), vol. 52, Elsevier
BV, 2019, pp. 270–75, https://doi.org/10.1016/j.ifacol.2019.10.041.
short: A. Huxol, F.-J. Villmer, DoE Methods for Parameter Evaluation in Selective
Laser Melting, Elsevier BV, Amsterdam [u.a.], 2019.
ufg: 'Huxol, Andrea/Villmer, Franz-Josef: DoE Methods for Parameter Evaluation
in Selective Laser Melting, Bd. 52, Amsterdam [u.a.] 2019 (IFAC-PapersOnLine).'
van: 'Huxol A, Villmer FJ. DoE Methods for Parameter Evaluation in Selective Laser
Melting. 13th International-Federation-of-Automatic-Control (IFAC) Workshop on
Intelligent Manufacturing Systems (IMS). Amsterdam [u.a.]: Elsevier BV; 2019.
(IFAC-PapersOnLine; vol. 52).'
conference:
end_date: 2019-08-14
location: Oshawa, CANADA
name: 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent
Manufacturing Systems (IMS)
start_date: 2019-08-12
date_created: 2025-04-15T09:27:00Z
date_updated: 2025-06-26T13:40:48Z
department:
- _id: DEP7000
doi: 10.1016/j.ifacol.2019.10.041
intvolume: ' 52'
keyword:
- Additive manufacturing
- quality control
- process qualification
- process control
- screening design
language:
- iso: eng
page: 270-275
place: Amsterdam [u.a.]
publication: 13th International-Federation-of-Automatic-Control (IFAC) Workshop on
Intelligent Manufacturing Systems (IMS)
publication_identifier:
issn:
- 2405-8963
publication_status: published
publisher: Elsevier BV
series_title: IFAC-PapersOnLine
status: public
title: DoE Methods for Parameter Evaluation in Selective Laser Melting
type: conference_editor_article
user_id: '83781'
volume: 52
year: '2019'
...
---
_id: '12792'
abstract:
- lang: eng
text: Additive Manufacturing has arisen as a ground-breaking set of technologies
that, thanks to their capability of continuous improvements in performance and
cost-efficiency, was able in the last years to replace well-established manufacturing
processes. Proficiency in the fabrication of highly complex parts forced this
astonishing development. This research is based on the idea that through the integration
of additive and conventional manufacturing technologies it is possible to achieve
great cost and operational benefits especially in the field of tool making for
injection molding. Such an integrated manufacturing solution could overcome the
limitations of independent additive, subtractive, and post-processing procedures
by strengthening their potentialities. The present study highlights the opportunities
of a synergy between the above-mentioned manufacturing technologies for the optimized
fabrication of injection molds. An additive manufacturing process chain is presented,
and special attention is given to the surface quality and its optimization directly
in the Selective Laser Melting process. The potentialities of the Laser Surface
Re-melting technique are analyzed, and the process optimization leads to a reduction
of 45% of the average roughness directly in the SLM process. (C) 2019, IFAC (International
Federation of Automatic Control) Hosting by Elsevier Ltd. All rights reserved.
author:
- first_name: Filippo
full_name: Simoni, Filippo
last_name: Simoni
- first_name: Andrea
full_name: Huxol, Andrea
id: '43559'
last_name: Huxol
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
id: '14290'
last_name: Villmer
citation:
ama: Simoni F, Huxol A, Villmer FJ. Approach Towards Surface Improvement in Additively
Manufactured Tools. Vol 52. Elsevier BV; 2019:254-259. doi:10.1016/j.ifacol.2019.10.032
apa: Simoni, F., Huxol, A., & Villmer, F.-J. (2019). Approach Towards Surface
Improvement in Additively Manufactured Tools. In 13th International-Federation-of-Automatic-Control
(IFAC) Workshop on Intelligent Manufacturing Systems (IMS) (Vol. 52, pp. 254–259).
Elsevier BV. https://doi.org/10.1016/j.ifacol.2019.10.032
bjps: 'Simoni F, Huxol A and Villmer F-J (2019) Approach Towards Surface
Improvement in Additively Manufactured Tools. Amsterdam [u.a.]: Elsevier BV.'
chicago: 'Simoni, Filippo, Andrea Huxol, and Franz-Josef Villmer. Approach Towards
Surface Improvement in Additively Manufactured Tools. 13th International-Federation-of-Automatic-Control
(IFAC) Workshop on Intelligent Manufacturing Systems (IMS). Vol. 52. IFAC-PapersOnLine.
Amsterdam [u.a.]: Elsevier BV, 2019. https://doi.org/10.1016/j.ifacol.2019.10.032.'
chicago-de: 'Simoni, Filippo, Andrea Huxol und Franz-Josef Villmer. 2019. Approach
Towards Surface Improvement in Additively Manufactured Tools. 13th International-Federation-of-Automatic-Control
(IFAC) Workshop on Intelligent Manufacturing Systems (IMS). Bd. 52. IFAC-PapersOnLine.
Amsterdam [u.a.]: Elsevier BV. doi:10.1016/j.ifacol.2019.10.032,
.'
din1505-2-1: 'Simoni, Filippo ; Huxol, Andrea ; Villmer,
Franz-Josef: Approach Towards Surface Improvement in Additively Manufactured
Tools, IFAC-PapersOnLine. Bd. 52. Amsterdam [u.a.] : Elsevier BV, 2019'
havard: F. Simoni, A. Huxol, F.-J. Villmer, Approach Towards Surface Improvement
in Additively Manufactured Tools, Elsevier BV, Amsterdam [u.a.], 2019.
ieee: 'F. Simoni, A. Huxol, and F.-J. Villmer, Approach Towards Surface Improvement
in Additively Manufactured Tools, vol. 52. Amsterdam [u.a.]: Elsevier BV,
2019, pp. 254–259. doi: 10.1016/j.ifacol.2019.10.032.'
mla: Simoni, Filippo, et al. “Approach Towards Surface Improvement in Additively
Manufactured Tools.” 13th International-Federation-of-Automatic-Control (IFAC)
Workshop on Intelligent Manufacturing Systems (IMS), vol. 52, Elsevier BV,
2019, pp. 254–59, https://doi.org/10.1016/j.ifacol.2019.10.032.
short: F. Simoni, A. Huxol, F.-J. Villmer, Approach Towards Surface Improvement
in Additively Manufactured Tools, Elsevier BV, Amsterdam [u.a.], 2019.
ufg: 'Simoni, Filippo/Huxol, Andrea/Villmer, Franz-Josef: Approach Towards
Surface Improvement in Additively Manufactured Tools, Bd. 52, Amsterdam [u.a.]
2019 (IFAC-PapersOnLine).'
van: 'Simoni F, Huxol A, Villmer FJ. Approach Towards Surface Improvement in Additively
Manufactured Tools. 13th International-Federation-of-Automatic-Control (IFAC)
Workshop on Intelligent Manufacturing Systems (IMS). Amsterdam [u.a.]: Elsevier
BV; 2019. (IFAC-PapersOnLine; vol. 52).'
conference:
end_date: 2019-08-14
location: Oshawa, CANADA
name: 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent
Manufacturing Systems (IMS)
start_date: 2019-08-12
date_created: 2025-04-15T09:32:02Z
date_updated: 2025-06-26T13:40:36Z
department:
- _id: DEP7000
doi: 10.1016/j.ifacol.2019.10.032
intvolume: ' 52'
keyword:
- Direct rapid tooling
- toolmaking
- additive manufacturing process chain
- process control
- production systems
- selective laser melting
- surface roughness
- laser surface re-melting
language:
- iso: eng
page: 254-259
place: Amsterdam [u.a.]
publication: 13th International-Federation-of-Automatic-Control (IFAC) Workshop on
Intelligent Manufacturing Systems (IMS)
publication_identifier:
issn:
- 2405-8963
publication_status: published
publisher: Elsevier BV
series_title: IFAC-PapersOnLine
status: public
title: Approach Towards Surface Improvement in Additively Manufactured Tools
type: conference_editor_article
user_id: '83781'
volume: 52
year: '2019'
...
---
_id: '12826'
abstract:
- lang: eng
text: The configuration of current automated production systems is complex and therefore
time consuming while the market demands an easy setup and adaptability due to
smaller batch sizes and volatile markets. While there are different concepts in
research on how to simplify the engineering process by using generic skills or
capabilities of devices, run-time control is still achieved with proprietary communication
protocols and commands. The concept in this paper uses skills not only in the
phase of engineering but also consequently for direct and generic control of field-devices.
An executable skill-metamodel therefore describes the methodological functionality
which is implemented by using OPC UA due to its vendor independence as well as
built-in services and information model. The implementation uses client/server-based
OPC UA and the pub/sub pattern to prepare for a deterministic real-time control
in conjunction with TSN, which is required by industrial automation.
author:
- first_name: Patrick
full_name: Zimmermann, Patrick
last_name: Zimmermann
- first_name: Etienne
full_name: Axmann, Etienne
last_name: Axmann
- first_name: Benjamin
full_name: Brandenbourger, Benjamin
last_name: Brandenbourger
- first_name: Kirill
full_name: Dorofeev, Kirill
last_name: Dorofeev
- first_name: Andre
full_name: Mankowski, Andre
id: '51482'
last_name: Mankowski
- first_name: Paulo
full_name: Zanini, Paulo
last_name: Zanini
citation:
ama: Zimmermann P, Axmann E, Brandenbourger B, Dorofeev K, Mankowski A, Zanini P.
Skill-Based Engineering and Control on Field-Device-Level with OPC UA.
(IEEE International Conference on Emerging Technologies and Factory Automation
, Institute of Electrical and Electronics Engineers, Universidad de Zaragoza ,
IEEE Industrial Electronics Society , eds.). IEEE; 2019:1101-1108. doi:10.1109/etfa.2019.8869473
apa: Zimmermann, P., Axmann, E., Brandenbourger, B., Dorofeev, K., Mankowski, A.,
& Zanini, P. (2019). Skill-based Engineering and Control on Field-Device-Level
with OPC UA. In IEEE International Conference on Emerging Technologies and Factory
Automation , Institute of Electrical and Electronics Engineers, Universidad de
Zaragoza , & IEEE Industrial Electronics Society (Eds.), 24th IEEE International
Conference on Emerging Technologies and Factory Automation (ETFA) (pp. 1101–1108).
IEEE. https://doi.org/10.1109/etfa.2019.8869473
bjps: 'Zimmermann P et al. (2019) Skill-Based Engineering and Control
on Field-Device-Level with OPC UA, IEEE International Conference on Emerging
Technologies and Factory Automation et al. (eds). [Piscataway, NJ]: IEEE.'
chicago: 'Zimmermann, Patrick, Etienne Axmann, Benjamin Brandenbourger, Kirill Dorofeev,
Andre Mankowski, and Paulo Zanini. Skill-Based Engineering and Control on Field-Device-Level
with OPC UA. Edited by IEEE International Conference on Emerging Technologies
and Factory Automation , Institute of Electrical and Electronics Engineers, Universidad
de Zaragoza , and IEEE Industrial Electronics Society . 24th IEEE International
Conference on Emerging Technologies and Factory Automation (ETFA). IEEE International
Conference on Emerging Technologies and Factory Automation-ETFA. [Piscataway,
NJ]: IEEE, 2019. https://doi.org/10.1109/etfa.2019.8869473.'
chicago-de: 'Zimmermann, Patrick, Etienne Axmann, Benjamin Brandenbourger, Kirill
Dorofeev, Andre Mankowski und Paulo Zanini. 2019. Skill-based Engineering and
Control on Field-Device-Level with OPC UA. Hg. von IEEE International Conference
on Emerging Technologies and Factory Automation , Institute of Electrical and
Electronics Engineers, Universidad de Zaragoza , und IEEE Industrial Electronics
Society . 24th IEEE International Conference on Emerging Technologies and Factory
Automation (ETFA). IEEE International Conference on Emerging Technologies
and Factory Automation-ETFA. [Piscataway, NJ]: IEEE. doi:10.1109/etfa.2019.8869473,
.'
din1505-2-1: 'Zimmermann, Patrick
; Axmann, Etienne ; Brandenbourger,
Benjamin ; Dorofeev, Kirill
; Mankowski, Andre ; Zanini,
Paulo ; IEEE International Conference
on Emerging Technologies and Factory Automation ; Institute
of Electrical and Electronics Engineers ; Universidad
de Zaragoza ; IEEE Industrial Electronics
Society (Hrsg.): Skill-based Engineering and Control on Field-Device-Level
with OPC UA, IEEE International Conference on Emerging Technologies and
Factory Automation-ETFA. [Piscataway, NJ] : IEEE, 2019'
havard: P. Zimmermann, E. Axmann, B. Brandenbourger, K. Dorofeev, A. Mankowski,
P. Zanini, Skill-based Engineering and Control on Field-Device-Level with OPC
UA, IEEE, [Piscataway, NJ], 2019.
ieee: 'P. Zimmermann, E. Axmann, B. Brandenbourger, K. Dorofeev, A. Mankowski, and
P. Zanini, Skill-based Engineering and Control on Field-Device-Level with OPC
UA. [Piscataway, NJ]: IEEE, 2019, pp. 1101–1108. doi: 10.1109/etfa.2019.8869473.'
mla: Zimmermann, Patrick, et al. “Skill-Based Engineering and Control on Field-Device-Level
with OPC UA.” 24th IEEE International Conference on Emerging Technologies and
Factory Automation (ETFA), edited by IEEE International Conference on Emerging
Technologies and Factory Automation et al., IEEE, 2019, pp. 1101–08, https://doi.org/10.1109/etfa.2019.8869473.
short: P. Zimmermann, E. Axmann, B. Brandenbourger, K. Dorofeev, A. Mankowski, P.
Zanini, Skill-Based Engineering and Control on Field-Device-Level with OPC UA,
IEEE, [Piscataway, NJ], 2019.
ufg: 'Zimmermann, Patrick u. a.: Skill-based Engineering and Control on Field-Device-Level
with OPC UA, hg. von IEEE International Conference on Emerging Technologies and
Factory Automation u. a., [Piscataway, NJ] 2019 (IEEE International Conference
on Emerging Technologies and Factory Automation-ETFA).'
van: 'Zimmermann P, Axmann E, Brandenbourger B, Dorofeev K, Mankowski A, Zanini
P. Skill-based Engineering and Control on Field-Device-Level with OPC UA. IEEE
International Conference on Emerging Technologies and Factory Automation , Institute
of Electrical and Electronics Engineers, Universidad de Zaragoza , IEEE Industrial
Electronics Society , editors. 24th IEEE International Conference on Emerging
Technologies and Factory Automation (ETFA). [Piscataway, NJ]: IEEE; 2019. (IEEE
International Conference on Emerging Technologies and Factory Automation-ETFA).'
conference:
end_date: 201-09-13
location: Zaragoza, SPAIN
name: 24th IEEE International Conference on Emerging Technologies and Factory Automation
(ETFA)
start_date: 2019-09-10
corporate_editor:
- 'IEEE International Conference on Emerging Technologies and Factory Automation '
- Institute of Electrical and Electronics Engineers
- 'Universidad de Zaragoza '
- 'IEEE Industrial Electronics Society '
date_created: 2025-04-22T13:52:53Z
date_updated: 2025-06-26T13:27:46Z
department:
- _id: DEP5023
doi: 10.1109/etfa.2019.8869473
keyword:
- OPC UA
- Skills
- Capabilities
- Engineering
- Field-Device
- Interoperability
- Control
language:
- iso: eng
page: 1101-1108
place: '[Piscataway, NJ]'
publication: 24th IEEE International Conference on Emerging Technologies and Factory
Automation (ETFA)
publication_identifier:
eisbn:
- 978-1-7281-0302-0
eissn:
- 1946-0759
isbn:
- 978-1-7281-0303-7
issn:
- 1946-0740
publication_status: published
publisher: IEEE
series_title: IEEE International Conference on Emerging Technologies and Factory Automation-ETFA
status: public
title: Skill-based Engineering and Control on Field-Device-Level with OPC UA
type: conference_editor_article
user_id: '83781'
year: '2019'
...
---
_id: '4506'
abstract:
- lang: ger
text: "In diesem Tagungsband sind die besten Beiträge des 7. Jahreskolloquiums \"Kommunikation
in der Automation\" (KommA 2016) und des 5. Jahreskolloquiums \"Bildverarbeitung
in der Automation\" (BVAu 2016) enthalten. Die Kolloquien fanden am 30. November
und 1. Dezember 2016 anlässlich des 10jährigen Jubiläums des inIT - Institut für
industrielle Informationstechnik in der SmartFactoryOWL, einer herstellerunabhängigen
und offenen Industrie 4.0 Forschungs- und Demonstrationsplattform und zugleich
Testfeld für den Mittelstand, in Lemgo statt.\r\nDie vorgestellten neuesten Forschungsergebnisse
auf den Gebieten der industriellen Kommunikationstechnik und Bildverarbeitung
erweitern den aktuellen Stand der Forschung und Technik. Die in den Beiträgen
enthaltenen anschauliche Anwendungsbeispiele aus dem Bereich der Automation setzen
die Ergebnisse in den direkten Anwendungsbezug."
citation:
ama: 'Jasperneite J, Lohweg V, eds. Kommunikation und Bildverarbeitung in der
Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum
10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik.
Vol 7. Springer Vieweg; 2017. doi:10.1007/978-3-662-55232-2'
apa: 'Jasperneite, J., & Lohweg, V. (Eds.). (2017). Kommunikation und Bildverarbeitung
in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016
zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik
(Vol. 7). Springer Vieweg. https://doi.org/10.1007/978-3-662-55232-2'
bjps: 'Jasperneite J and Lohweg V (eds) (2017) Kommunikation und Bildverarbeitung
in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016
zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik.
Berlin: Springer Vieweg.'
chicago: 'Jasperneite, Jürgen, and Volker Lohweg, eds. Kommunikation und Bildverarbeitung
in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016
zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik.
Vol. 7. Technologien für die intelligente Automation . Berlin: Springer Vieweg,
2017. https://doi.org/10.1007/978-3-662-55232-2.'
chicago-de: 'Jasperneite, Jürgen und Volker Lohweg, Hrsg. 2017. Kommunikation
und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien
KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle
Informationstechnik. Bd. 7. Technologien für die intelligente Automation .
Berlin: Springer Vieweg. doi:10.1007/978-3-662-55232-2,
.'
din1505-2-1: 'Jasperneite, J. ; Lohweg, V. (Hrsg.): Kommunikation
und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien
KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle
Informationstechnik, Technologien für die intelligente Automation .
Bd. 7. Berlin : Springer Vieweg, 2017'
havard: 'J. Jasperneite, V. Lohweg, eds., Kommunikation und Bildverarbeitung in
der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016
zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik,
Springer Vieweg, Berlin, 2017.'
ieee: 'J. Jasperneite and V. Lohweg, Eds., Kommunikation und Bildverarbeitung
in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016
zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik,
vol. 7. Berlin: Springer Vieweg, 2017. doi: 10.1007/978-3-662-55232-2.'
mla: 'Jasperneite, Jürgen, and Volker Lohweg, editors. Kommunikation und Bildverarbeitung
in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016
zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik.
Springer Vieweg, 2017, https://doi.org/10.1007/978-3-662-55232-2.'
short: 'J. Jasperneite, V. Lohweg, eds., Kommunikation und Bildverarbeitung in
der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016
zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik,
Springer Vieweg, Berlin, 2017.'
ufg: 'Jasperneite, Jürgen/Lohweg, Volker: Kommunikation und Bildverarbeitung
in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016
zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik,
Bd. 7, Berlin 2017 (Technologien für die intelligente Automation ).'
van: 'Jasperneite J, Lohweg V, editors. Kommunikation und Bildverarbeitung in der
Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum
10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik.
Berlin: Springer Vieweg; 2017. 295 p. (Technologien für die intelligente Automation
; vol. 7).'
conference:
end_date: 2026-12-01
location: Lemgo
name: 7. Jahreskolloquiums "Kommunikation in der Automation" (KommA 2016) / 5.
Jahreskolloquiums "Bildverarbeitung in der Automation" (BVAu 2016)
start_date: 2016-11-30
date_created: 2021-01-22T08:40:04Z
date_updated: 2025-05-12T08:19:51Z
department:
- _id: DEP5023
doi: 10.1007/978-3-662-55232-2
editor:
- first_name: Jürgen
full_name: Jasperneite, Jürgen
id: '1899'
last_name: Jasperneite
- first_name: Volker
full_name: Lohweg, Volker
id: '1804'
last_name: Lohweg
orcid: 0000-0002-3325-7887
intvolume: ' 7'
keyword:
- Industrielle Kommunikationstechnik
- Industrielle Bildverarbeitung
- network reliability and redundancy methods
- Networked Controls Systems
- wireless real-time communication
- quality control
- reliability
- safety and risk
language:
- iso: ger
page: '295'
place: Berlin
publication_identifier:
eisbn:
- '978-3-662-55232-2 '
isbn:
- 978-3-662-55231-5
publication_status: published
publisher: Springer Vieweg
series_title: 'Technologien für die intelligente Automation '
status: public
title: ' Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge
der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut
für industrielle Informationstechnik'
type: book_editor
user_id: '83781'
volume: 7
year: '2017'
...
---
_id: '328'
abstract:
- lang: eng
text: "In this paper, concepts for an extended DC network for the main power
supply of components from various manufacturers in industrial production are presented.
In the first part, detailed requirements for such a network are given
\ from the viewpoint of a customer. Based on those, different concepts
for AC/DC conversion and energy management are discussed. As far as AC/DC conversion
\ is concerned, the advantages and drawbacks of several rectifier topologies
are listed, as they have a significant impact on the system behavior and
\ EMC properties. \r\nAn intelligent energy management can improve the
\ energy efficiency and reduce downtimes of a plant, which are major
requirements from a customer’s viewpoint. "
author:
- first_name: Holger
full_name: Borcherding, Holger
id: '1693'
last_name: Borcherding
- first_name: Johann
full_name: Austermann, Johann
id: '42114'
last_name: Austermann
- first_name: Timm
full_name: Kuhlmann, Timm
last_name: Kuhlmann
- first_name: Benno
full_name: Weis, Benno
last_name: Weis
- first_name: Andre
full_name: Leonide, Andre
last_name: Leonide
citation:
ama: 'Borcherding H, Austermann J, Kuhlmann T, Weis B, Leonide A. Concepts for a
DC Network in Industrial Production. In: Institute of Electrical and Electronics
Engineers (IEEE), ed. 2017 IEEE Second International Conference on DC Microgrids
(ICDCM). Danvers; 2017:227-234. doi:10.1109/ICDCM.2017.8001049'
apa: Borcherding, H., Austermann, J., Kuhlmann, T., Weis, B., & Leonide, A.
(2017). Concepts for a DC Network in Industrial Production. In Institute of Electrical
and Electronics Engineers (IEEE) (Ed.), 2017 IEEE Second International Conference
on DC Microgrids (ICDCM) (pp. 227–234). Danvers. https://doi.org/10.1109/ICDCM.2017.8001049
bjps: Borcherding H et al. (2017) Concepts for a DC Network in Industrial
Production. In Institute of Electrical and Electronics Engineers (IEEE) (ed.),
2017 IEEE Second International Conference on DC Microgrids (ICDCM). Danvers,
pp. 227–234.
chicago: Borcherding, Holger, Johann Austermann, Timm Kuhlmann, Benno Weis, and
Andre Leonide. “Concepts for a DC Network in Industrial Production.” In 2017
IEEE Second International Conference on DC Microgrids (ICDCM), edited by Institute
of Electrical and Electronics Engineers (IEEE), 227–34. Danvers, 2017. https://doi.org/10.1109/ICDCM.2017.8001049.
chicago-de: 'Borcherding, Holger, Johann Austermann, Timm Kuhlmann, Benno Weis und
Andre Leonide. 2017. Concepts for a DC Network in Industrial Production. In: 2017
IEEE Second International Conference on DC Microgrids (ICDCM), hg. von Institute
of Electrical and Electronics Engineers (IEEE), 227–234. Danvers. doi:10.1109/ICDCM.2017.8001049,
.'
din1505-2-1: 'Borcherding, Holger
; Austermann, Johann ; Kuhlmann,
Timm ; Weis, Benno ; Leonide, Andre: Concepts for a DC Network
in Industrial Production. In: Institute
of Electrical and Electronics Engineers (IEEE) (Hrsg.): 2017 IEEE Second
International Conference on DC Microgrids (ICDCM). Danvers, 2017, S. 227–234'
havard: 'H. Borcherding, J. Austermann, T. Kuhlmann, B. Weis, A. Leonide, Concepts
for a DC Network in Industrial Production, in: Institute of Electrical and Electronics
Engineers (IEEE) (Ed.), 2017 IEEE Second International Conference on DC Microgrids
(ICDCM), Danvers, 2017: pp. 227–234.'
ieee: H. Borcherding, J. Austermann, T. Kuhlmann, B. Weis, and A. Leonide, “Concepts
for a DC Network in Industrial Production,” in 2017 IEEE Second International
Conference on DC Microgrids (ICDCM), Nürnberg, 2017, no. 1, pp. 227–234.
mla: Borcherding, Holger, et al. “Concepts for a DC Network in Industrial Production.”
2017 IEEE Second International Conference on DC Microgrids (ICDCM), edited
by Institute of Electrical and Electronics Engineers (IEEE), no. 1, 2017, pp.
227–34, doi:10.1109/ICDCM.2017.8001049.
short: 'H. Borcherding, J. Austermann, T. Kuhlmann, B. Weis, A. Leonide, in: Institute
of Electrical and Electronics Engineers (IEEE) (Ed.), 2017 IEEE Second International
Conference on DC Microgrids (ICDCM), Danvers, 2017, pp. 227–234.'
ufg: 'Borcherding, Holger et. al. (2017): Concepts for a DC Network in Industrial
Production, in: Institute of Electrical and Electronics Engineers (IEEE) (Hg.):
2017 IEEE Second International Conference on DC Microgrids (ICDCM), Danvers,
S. 227–234.'
van: 'Borcherding H, Austermann J, Kuhlmann T, Weis B, Leonide A. Concepts for a
DC Network in Industrial Production. In: Institute of Electrical and Electronics
Engineers (IEEE), editor. 2017 IEEE Second International Conference on DC Microgrids
(ICDCM). Danvers; 2017. p. 227–34.'
conference:
end_date: 2017-06-29
location: Nürnberg
name: 'IEEE Second International Conference on DC Microgrids (ICDCM) '
start_date: 2017-06-27
corporate_editor:
- Institute of Electrical and Electronics Engineers (IEEE)
date_created: 2018-12-10T15:11:18Z
date_updated: 2023-03-15T13:49:46Z
department:
- _id: DEP5018
doi: 10.1109/ICDCM.2017.8001049
issue: '1'
keyword:
- AC-DC power convertors
- electromagnetic compatibility
- energy conservation
- energy management systems
- rectifiers
- main power supply
- industrial production
- DC network
- AC-DC conversion
- rectifier topologies
- EMC properties
- intelligent energy management
- energy efficiency improvement
- downtime reduction
- Rectifiers
- Switches
- Voltage control
- Topology
- Network topology
- Production
- Grounding
- industrial DC grid
- SMART Grid
language:
- iso: eng
main_file_link:
- url: https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8001049
page: 227-234
place: Danvers
publication: 2017 IEEE Second International Conference on DC Microgrids (ICDCM)
related_material:
link:
- relation: contains
url: https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8001049
status: public
title: Concepts for a DC Network in Industrial Production
type: conference
user_id: '45673'
year: 2017
...
---
_id: '570'
abstract:
- lang: eng
text: Additive manufacturing (AM) has matured rapidly during the last years due
to the advancement of AM machines and materials. Nevertheless, the widespread
adoption of AM is still challenged by producing parts with reliable quality. The
aim of this paper is t o introduce a first approach to apply in-situ monitoring
for quality evaluation of produced parts. Based on the monitored data, a model
is developed, in order to predict the quality of ready built parts.
author:
- first_name: Eva
full_name: Scheideler, Eva
id: '61522'
last_name: Scheideler
- first_name: Andrea
full_name: Huxol, Andrea
id: '43559'
last_name: Huxol
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
id: '14290'
last_name: Villmer
citation:
ama: 'Scheideler E, Huxol A, Villmer F-J. Nondestructive Quality Check of Additive
Manufactured Parts Using Empirical Models. In: Padoano E, Villmer F-J, Department
of Production Engineering and Management, eds. Production Engineeringand Management.
Publication series in direct digital manufacturing . Lemgo; 2017:89-100.'
apa: Scheideler, E., Huxol, A., & Villmer, F.-J. (2017). Nondestructive Quality
Check of Additive Manufactured Parts Using Empirical Models. In E. Padoano, F.-J.
Villmer, & Department of Production Engineering and Management (Eds.), Production
Engineeringand Management (pp. 89–100). Lemgo.
bjps: Scheideler E, Huxol A and Villmer F-J (2017) Nondestructive Quality
Check of Additive Manufactured Parts Using Empirical Models. In Padoano E, Villmer
F-J and Department of Production Engineering and Management (eds), Production
Engineeringand Management. Lemgo, pp. 89–100.
chicago: Scheideler, Eva, Andrea Huxol, and Franz-Josef Villmer. “Nondestructive
Quality Check of Additive Manufactured Parts Using Empirical Models.” In Production
Engineeringand Management, edited by Elio Padoano, Franz-Josef Villmer, and
Department of Production Engineering and Management, 89–100. Publication Series
in Direct Digital Manufacturing . Lemgo, 2017.
chicago-de: 'Scheideler, Eva, Andrea Huxol und Franz-Josef Villmer. 2017. Nondestructive
Quality Check of Additive Manufactured Parts Using Empirical Models. In: Production
Engineeringand Management, hg. von Elio Padoano, Franz-Josef Villmer, und
Department of Production Engineering and Management, 89–100. Publication series
in direct digital manufacturing . Lemgo.'
din1505-2-1: 'Scheideler, Eva ; Huxol, Andrea ; Villmer,
Franz-Josef: Nondestructive Quality Check of Additive Manufactured Parts
Using Empirical Models. In: Padoano, E.
; Villmer, F.-J. ; Department
of Production Engineering and Management (Hrsg.): Production Engineeringand
Management, Publication series in direct digital manufacturing . Lemgo,
2017, S. 89–100'
havard: 'E. Scheideler, A. Huxol, F.-J. Villmer, Nondestructive Quality Check of
Additive Manufactured Parts Using Empirical Models, in: E. Padoano, F.-J. Villmer,
Department of Production Engineering and Management (Eds.), Production Engineeringand
Management, Lemgo, 2017: pp. 89–100.'
ieee: E. Scheideler, A. Huxol, and F.-J. Villmer, “Nondestructive Quality Check
of Additive Manufactured Parts Using Empirical Models,” in Production Engineeringand
Management, Pordenone, Italy, 2017, no. 1, pp. 89–100.
mla: Scheideler, Eva, et al. “Nondestructive Quality Check of Additive Manufactured
Parts Using Empirical Models.” Production Engineeringand Management, edited
by Elio Padoano et al., no. 1, 2017, pp. 89–100.
short: 'E. Scheideler, A. Huxol, F.-J. Villmer, in: E. Padoano, F.-J. Villmer, Department
of Production Engineering and Management (Eds.), Production Engineeringand Management,
Lemgo, 2017, pp. 89–100.'
ufg: 'Scheideler, Eva et. al. (2017): Nondestructive Quality Check of Additive
Manufactured Parts Using Empirical Models, in: Elio Padoano et. al. (Hgg.): Production
Engineeringand Management (=Publication series in direct digital manufacturing
), Lemgo, S. 89–100.'
van: 'Scheideler E, Huxol A, Villmer F-J. Nondestructive Quality Check of Additive
Manufactured Parts Using Empirical Models. In: Padoano E, Villmer F-J, Department
of Production Engineering and Management, editors. Production Engineeringand Management.
Lemgo; 2017. p. 89–100. (Publication series in direct digital manufacturing ).'
conference:
end_date: 2017-09-29
location: Pordenone, Italy
name: Proceedings7th International Conference
start_date: 2017-09-28
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-18T09:46:43Z
date_updated: 2023-03-15T13:50:01Z
department:
- _id: DEP1306
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
issue: '1'
keyword:
- Nondestructive quality control
- Predictive analytics
- Metal model
- Additive manufacturing
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf
oa: '1'
page: 89-100
place: Lemgo
publication: Production Engineeringand Management
publication_identifier:
isbn:
- 978-3-946856-01-6
publication_status: published
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf
series_title: 'Publication series in direct digital manufacturing '
status: public
title: Nondestructive Quality Check of Additive Manufactured Parts Using Empirical
Models
type: conference
user_id: '45673'
year: 2017
...
---
_id: '577'
abstract:
- lang: eng
text: A rising number of product variants together with decreasing lot sizes are
a result of the trend of individualization. Besides the upcoming organizational
issues, changes in the production technologies are required. Direct digital manufacturing
contributes to solve this problem by enabling the production of parts right from
the CAD data.Process capability analysis is applied in several industries to prove
the reliable compliance of products with quality requirements. As it is based
on statistical methods, new challenges arise in the context of single-part production.The
paper describes and compares different approaches for the adoption of process
capability analysis for single-part production with special focus on additive
manufacturing technologies. The statistical background and the applicability of
different capability parameters are discussed. An overview of existing research
work is given and supplemented by own approaches for the adoption of statistical
methods for single-part production. The aim of the research work is to establish
a first approach for the qualification of new technologies in single-part production.
author:
- first_name: Andrea
full_name: Huxol, Andrea
id: '43559'
last_name: Huxol
- first_name: Andrea
full_name: Davis, Andrea
id: '68611'
last_name: Davis
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
id: '14290'
last_name: Villmer
- first_name: Eva
full_name: Scheideler, Eva
id: '61522'
last_name: Scheideler
citation:
ama: 'Huxol A, Davis A, Villmer F-J, Scheideler E. Deployment of Process Capability
Analysis for Single-Part Production. In: Padoano E, Villmer F-J, Department of
Production Engineering and Management, eds. Production Engineering and Management.
Publication series in direct digital manufacturing . Lemgo; 2017:63-74.'
apa: Huxol, A., Davis, A., Villmer, F.-J., & Scheideler, E. (2017). Deployment
of Process Capability Analysis for Single-Part Production. In E. Padoano, F.-J.
Villmer, & Department of Production Engineering and Management (Eds.), Production
Engineering and Management (pp. 63–74). Lemgo.
bjps: Huxol A et al. (2017) Deployment of Process Capability Analysis
for Single-Part Production. In Padoano E, Villmer F-J and Department of Production
Engineering and Management (eds), Production Engineering and Management.
Lemgo, pp. 63–74.
chicago: Huxol, Andrea, Andrea Davis, Franz-Josef Villmer, and Eva Scheideler. “Deployment
of Process Capability Analysis for Single-Part Production.” In Production Engineering
and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department
of Production Engineering and Management, 63–74. Publication Series in Direct
Digital Manufacturing . Lemgo, 2017.
chicago-de: 'Huxol, Andrea, Andrea Davis, Franz-Josef Villmer und Eva Scheideler.
2017. Deployment of Process Capability Analysis for Single-Part Production. In:
Production Engineering and Management, hg. von Elio Padoano, Franz-Josef
Villmer, und Department of Production Engineering and Management, 63–74. Publication
series in direct digital manufacturing . Lemgo.'
din1505-2-1: 'Huxol, Andrea ; Davis, Andrea ; Villmer,
Franz-Josef ; Scheideler, Eva:
Deployment of Process Capability Analysis for Single-Part Production. In: Padoano, E. ; Villmer,
F.-J. ; Department of Production
Engineering and Management (Hrsg.): Production Engineering and Management,
Publication series in direct digital manufacturing . Lemgo, 2017, S. 63–74'
havard: 'A. Huxol, A. Davis, F.-J. Villmer, E. Scheideler, Deployment of Process
Capability Analysis for Single-Part Production, in: E. Padoano, F.-J. Villmer,
Department of Production Engineering and Management (Eds.), Production Engineering
and Management, Lemgo, 2017: pp. 63–74.'
ieee: A. Huxol, A. Davis, F.-J. Villmer, and E. Scheideler, “Deployment of Process
Capability Analysis for Single-Part Production,” in Production Engineering
and Management, Pordenone, Italy, 2017, no. 1, pp. 63–74.
mla: Huxol, Andrea, et al. “Deployment of Process Capability Analysis for Single-Part
Production.” Production Engineering and Management, edited by Elio Padoano
et al., no. 1, 2017, pp. 63–74.
short: 'A. Huxol, A. Davis, F.-J. Villmer, E. Scheideler, in: E. Padoano, F.-J.
Villmer, Department of Production Engineering and Management (Eds.), Production
Engineering and Management, Lemgo, 2017, pp. 63–74.'
ufg: 'Huxol, Andrea et. al. (2017): Deployment of Process Capability Analysis
for Single-Part Production, in: Elio Padoano et. al. (Hgg.): Production Engineering
and Management (=Publication series in direct digital manufacturing ),
Lemgo, S. 63–74.'
van: 'Huxol A, Davis A, Villmer F-J, Scheideler E. Deployment of Process Capability
Analysis for Single-Part Production. In: Padoano E, Villmer F-J, Department of
Production Engineering and Management, editors. Production Engineering and Management.
Lemgo; 2017. p. 63–74. (Publication series in direct digital manufacturing ).'
conference:
end_date: 2017-09-29
location: Pordenone, Italy
name: Proceedings7th International Conference
start_date: 2017-09-28
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-18T11:16:07Z
date_updated: 2023-03-15T13:50:01Z
department:
- _id: DEP1306
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
issue: '1'
keyword:
- Statistical process control
- Process capability analysis
- Single-part production
- Process optimization
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf
oa: '1'
page: 63-74
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-946856-01-6
publication_status: published
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf
series_title: 'Publication series in direct digital manufacturing '
status: public
title: Deployment of Process Capability Analysis for Single-Part Production
type: conference
user_id: '45673'
year: 2017
...
---
_id: '580'
abstract:
- lang: eng
text: Additive Manufacturing (AM) is increasingly used to design new products. This
is possible due to the further development of the AM-processes and materials.
The lack of quality assurance of AM built parts is a key technological barrier
that prevents manufacturers from adopting. The quality of an additive manufactured
part is influenced by more than 50 parameters, which make process control difficult.
Current research deals with using real time monitoring of the melt pool as feedback
control for laser power. This paper illustrates challenges and opportunities of
applying statistical predictive modeling and unsupervised learning to control
additive manufacturing. In particular, an approach how to build a feedforward
controller will be discussed.
author:
- first_name: Eva
full_name: Scheideler, Eva
id: '61522'
last_name: Scheideler
- first_name: Andrea
full_name: Ahlemeyer-Stubbe, Andrea
last_name: Ahlemeyer-Stubbe
citation:
ama: 'Scheideler E, Ahlemeyer-Stubbe A. Quality Control of Additive Manufacturing
Using Statistical Prediction Models. In: Padoano E, Villmer FJ, Department of
Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds.
Production Engineering and Management : Proceedings 7th International Conference,
September 28 and 29, 2017, Pordenone, Italy . Vol 2017. Publication series
in direct digital manufacturing . ; 2017:3-12.'
apa: 'Scheideler, E., & Ahlemeyer-Stubbe, A. (2017). Quality Control of Additive
Manufacturing Using Statistical Prediction Models. In E. Padoano, F.-J. Villmer,
Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe
(Eds.), Production engineering and management : proceedings 7th international
conference, September 28 and 29, 2017, Pordenone, Italy (Vol. 2017, Issue
1, pp. 3–12).'
bjps: 'Scheideler E and Ahlemeyer-Stubbe A (2017) Quality Control of Additive
Manufacturing Using Statistical Prediction Models. In Padoano E et al. (eds),
Production Engineering and Management : Proceedings 7th International Conference,
September 28 and 29, 2017, Pordenone, Italy , vol. 2017. Lemgo, pp. 3–12.'
chicago: 'Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Quality Control of Additive
Manufacturing Using Statistical Prediction Models.” In Production Engineering
and Management : Proceedings 7th International Conference, September 28 and 29,
2017, Pordenone, Italy , edited by Elio Padoano, Franz-Josef Villmer, Department
of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, 2017:3–12.
Publication Series in Direct Digital Manufacturing . Lemgo, 2017.'
chicago-de: 'Scheideler, Eva und Andrea Ahlemeyer-Stubbe. 2017. Quality Control
of Additive Manufacturing Using Statistical Prediction Models. In: Production
engineering and management : proceedings 7th international conference, September
28 and 29, 2017, Pordenone, Italy , hg. von Elio Padoano, Franz-Josef Villmer,
Department of Production Engineering and Management, und Hochschule Ostwestfalen-Lippe,
2017:3–12. Publication series in direct digital manufacturing . Lemgo.'
din1505-2-1: 'Scheideler, Eva ; Ahlemeyer-Stubbe, Andrea: Quality Control
of Additive Manufacturing Using Statistical Prediction Models. In: Padoano,
E. ; Villmer, F.-J. ; Department of Production Engineering and Management
; Hochschule Ostwestfalen-Lippe
(Hrsg.): Production engineering and management : proceedings 7th international
conference, September 28 and 29, 2017, Pordenone, Italy , Publication
series in direct digital manufacturing . Bd. 2017. Lemgo, 2017, S. 3–12'
havard: 'E. Scheideler, A. Ahlemeyer-Stubbe, Quality Control of Additive Manufacturing
Using Statistical Prediction Models, in: E. Padoano, F.-J. Villmer, Department
of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.),
Production Engineering and Management : Proceedings 7th International Conference,
September 28 and 29, 2017, Pordenone, Italy , Lemgo, 2017: pp. 3–12.'
ieee: 'E. Scheideler and A. Ahlemeyer-Stubbe, “Quality Control of Additive Manufacturing
Using Statistical Prediction Models,” in Production engineering and management :
proceedings 7th international conference, September 28 and 29, 2017, Pordenone,
Italy , Pordenone, Italy, 2017, vol. 2017, no. 1, pp. 3–12.'
mla: 'Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Quality Control of Additive
Manufacturing Using Statistical Prediction Models.” Production Engineering
and Management : Proceedings 7th International Conference, September 28 and 29,
2017, Pordenone, Italy , edited by Elio Padoano et al., vol. 2017, no. 1,
2017, pp. 3–12.'
short: 'E. Scheideler, A. Ahlemeyer-Stubbe, in: E. Padoano, F.-J. Villmer, Department
of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.),
Production Engineering and Management : Proceedings 7th International Conference,
September 28 and 29, 2017, Pordenone, Italy , Lemgo, 2017, pp. 3–12.'
ufg: 'Scheideler, Eva/Ahlemeyer-Stubbe, Andrea: Quality Control of Additive
Manufacturing Using Statistical Prediction Models, in: Padoano, Elio u. a.
(Hgg.): Production engineering and management : proceedings 7th international
conference, September 28 and 29, 2017, Pordenone, Italy , Bd. 2017, Lemgo 2017
( Publication series in direct digital manufacturing ), S. 3–12.'
van: 'Scheideler E, Ahlemeyer-Stubbe A. Quality Control of Additive Manufacturing
Using Statistical Prediction Models. In: Padoano E, Villmer FJ, Department of
Production Engineering and Management, Hochschule Ostwestfalen-Lippe, editors.
Production engineering and management : proceedings 7th international conference,
September 28 and 29, 2017, Pordenone, Italy . Lemgo; 2017. p. 3–12. ( Publication
series in direct digital manufacturing ; vol. 2017).'
conference:
end_date: 2017-09-29
location: Pordenone, Italy
name: 7th International Conference on Production Engineering and Management
start_date: 2017-09-28
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-18T11:34:36Z
date_updated: 2024-03-22T13:19:02Z
department:
- _id: DEP1306
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
id: '14290'
last_name: Villmer
intvolume: ' 2017'
issue: '1'
keyword:
- Additive manufacturing
- Process control
- Predictive modeling
- Predictive control
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf
oa: '1'
page: 3-12
place: Lemgo
publication: "\t Production engineering and management : proceedings 7th international
conference, September 28 and 29, 2017, Pordenone, Italy "
publication_identifier:
isbn:
- 978-3-946856-01-6
publication_status: published
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf
series_title: "\t Publication series in direct digital manufacturing "
status: public
title: Quality Control of Additive Manufacturing Using Statistical Prediction Models
type: conference
user_id: '83781'
volume: 2017
year: '2017'
...
---
_id: '12975'
abstract:
- lang: eng
text: "Properly handled fish is usually marketed as “fresh fish” until day 10 after
fishing. About 40% of the total fishery that is used for direct human consumption
is marketed in fresh form stored at temperatures up to +2 °C. Currently, there
are no validated methods available for controlling the recommended period of storage.
Apart from being a potential source for food fraud, spoiled fish represents a
major source of foodborne illnesses and intoxications.\r\nIn this study, a rapid
MALDI-TOF mass spectrometry based screening method was developed using the vitreous
fluid of fish eyes as specimen for the examination of different days of storage.
The vitreous fluid was collected from n = 100 freshly fished brown trouts at day
0, 3, 7, 9, and 11 post mortem (n = 20 brown trouts each day of examination).
The samples were immediately measured by MALDI-TOF mass spectrometry in linear
positive mode (mass range m/z 2000–20,000 Da). For quality assurance the experiment
was repeated with a set of brown trouts (n = 100) originating from the same fish
farm and with brown trouts (n = 100) originating from a different fish farm. For
specificity testing rainbow trouts (n = 10) were examined accordingly. All obtained
mass spectra were processed by means of MALDI Biotyper OC 3.1 and ClinProTools
3.0 software.\r\nThe MALDI Biotyper approach showed limited applicability for
the identification of the time of storage. However, it was suitable to reliably
discriminate between the closely related species brown and rainbow trout. Processing
by ClinProTools revealed four crucial mass peaks (m/z 2594 Da, m/z 4857 Da, m/z
4879 Da, m/z 4899 Da) which enabled a reliable differentiation between day 0 and
3, 7, 9, 11 (rate of correct identification > 90%) as well as the differentiation
between day 3 and 7, 9, 11 (rate of correct identification > 72%). However, this
approach showed limited applicability within the end of the tested period of storage
when comparing between day 7, 9, or 11."
author:
- first_name: Sebastian
full_name: Ulrich, Sebastian
id: '85847'
last_name: Ulrich
orcid: 0000-0002-4511-9537
- first_name: Philipp–Michael
full_name: Beindorf, Philipp–Michael
last_name: Beindorf
- first_name: Barbara
full_name: Biermaier, Barbara
last_name: Biermaier
- first_name: Karin
full_name: Schwaiger, Karin
last_name: Schwaiger
- first_name: Manfred
full_name: Gareis, Manfred
last_name: Gareis
- first_name: Christoph
full_name: Gottschalk, Christoph
last_name: Gottschalk
citation:
ama: Ulrich S, Beindorf P, Biermaier B, Schwaiger K, Gareis M, Gottschalk C. A novel
approach for the determination of freshness and identity of trouts by MALDI-TOF
mass spectrometry. Food Control. 2017;80(10):281-289. doi:10.1016/j.foodcont.2017.05.005
apa: Ulrich, S., Beindorf, P., Biermaier, B., Schwaiger, K., Gareis, M., & Gottschalk,
C. (2017). A novel approach for the determination of freshness and identity of
trouts by MALDI-TOF mass spectrometry. Food Control, 80(10), 281–289.
https://doi.org/10.1016/j.foodcont.2017.05.005
bjps: Ulrich S et al. (2017) A Novel Approach for the Determination
of Freshness and Identity of Trouts by MALDI-TOF Mass Spectrometry. Food Control
80, 281–289.
chicago: 'Ulrich, Sebastian, Philipp–Michael Beindorf, Barbara Biermaier, Karin
Schwaiger, Manfred Gareis, and Christoph Gottschalk. “A Novel Approach for the
Determination of Freshness and Identity of Trouts by MALDI-TOF Mass Spectrometry.”
Food Control 80, no. 10 (2017): 281–89. https://doi.org/10.1016/j.foodcont.2017.05.005.'
chicago-de: 'Ulrich, Sebastian, Philipp–Michael Beindorf, Barbara Biermaier, Karin
Schwaiger, Manfred Gareis und Christoph Gottschalk. 2017. A novel approach for
the determination of freshness and identity of trouts by MALDI-TOF mass spectrometry.
Food Control 80, Nr. 10: 281–289. doi:10.1016/j.foodcont.2017.05.005,
.'
din1505-2-1: 'Ulrich, Sebastian ;
Beindorf, Philipp–Michael ; Biermaier, Barbara ; Schwaiger,
Karin ; Gareis, Manfred ;
Gottschalk, Christoph: A novel approach
for the determination of freshness and identity of trouts by MALDI-TOF mass spectrometry.
In: Food Control Bd. 80. Amsterdam, Elsevier (2017), Nr. 10, S. 281–289'
havard: S. Ulrich, P. Beindorf, B. Biermaier, K. Schwaiger, M. Gareis, C. Gottschalk,
A novel approach for the determination of freshness and identity of trouts by
MALDI-TOF mass spectrometry, Food Control. 80 (2017) 281–289.
ieee: 'S. Ulrich, P. Beindorf, B. Biermaier, K. Schwaiger, M. Gareis, and C. Gottschalk,
“A novel approach for the determination of freshness and identity of trouts by
MALDI-TOF mass spectrometry,” Food Control, vol. 80, no. 10, pp. 281–289,
2017, doi: 10.1016/j.foodcont.2017.05.005.'
mla: Ulrich, Sebastian, et al. “A Novel Approach for the Determination of Freshness
and Identity of Trouts by MALDI-TOF Mass Spectrometry.” Food Control, vol.
80, no. 10, 2017, pp. 281–89, https://doi.org/10.1016/j.foodcont.2017.05.005.
short: S. Ulrich, P. Beindorf, B. Biermaier, K. Schwaiger, M. Gareis, C. Gottschalk,
Food Control 80 (2017) 281–289.
ufg: 'Ulrich, Sebastian u. a.: A novel approach for the determination of
freshness and identity of trouts by MALDI-TOF mass spectrometry, in: Food Control
80 (2017), H. 10, S. 281–289.'
van: Ulrich S, Beindorf P, Biermaier B, Schwaiger K, Gareis M, Gottschalk C. A novel
approach for the determination of freshness and identity of trouts by MALDI-TOF
mass spectrometry. Food Control. 2017;80(10):281–9.
date_created: 2025-06-15T10:29:56Z
date_updated: 2025-06-18T12:06:11Z
department:
- _id: DEP4010
doi: 10.1016/j.foodcont.2017.05.005
extern: '1'
intvolume: ' 80'
issue: '10'
keyword:
- MALDI-TOF
- Mass spectrometry
- Freshness
- Fish
- Quality control
- Authenticity
language:
- iso: eng
page: 281-289
place: Amsterdam
publication: Food Control
publication_identifier:
issn:
- 0956-7135
publication_status: published
publisher: 'Elsevier '
quality_controlled: '1'
status: public
title: A novel approach for the determination of freshness and identity of trouts
by MALDI-TOF mass spectrometry
type: scientific_journal_article
user_id: '83781'
volume: 80
year: '2017'
...
---
_id: '273'
abstract:
- lang: eng
text: This paper introduces an efficient modular solution kit for intralogistic
drives, which reduces the total energy consumption of all drives in an automated
warehouse by more than 15%. The reduction of energy consumption results from the
interaction of optimized components (motors, control techniques and regeneration
units), which are described in detail in this paper. Different motor concepts
like the induction motor, the synchronous reluctance motor and the permanent magnet
synchronous machine are compared according to the special requirements for intralogistics
applications. Different control techniques are presented in order to achieve sensorless
and efficient-optimal operation of these motors. The sensorless control technique
uses signal injection to detect the rotor position sufficiently exact also in
case of speed near standstill. Efficient-optimal operation is achieved by reducing
the motor current with regard to the torque (MTPA-control). Furthermore this paper
introduces a regeneration unit that can be connected between the DC link of frequency
inverters and the mains to feed back regenerative energy. The regeneration unit
consisting of a buck converter, a synchronous inverter and a line-filter can work
in parallel to commonly used uncontrolled rectifiers. Its functioning is shown
with the help of measurement results of a 1kW laboratory prototype. The last section
shows a demonstrator in which a conventional conveyer system (with induction motor
and braking resistor) is compared with an optimized one using the presented components.
Power versus time measurements show specific energy savings resulting from the
interaction of the optimized components.
author:
- first_name: Johann
full_name: Austermann, Johann
id: '42114'
last_name: Austermann
- first_name: Holger
full_name: Borcherding, Holger
id: '1693'
last_name: Borcherding
- first_name: H.
full_name: Stichweh, H.
last_name: Stichweh
- first_name: Volker
full_name: Grabs, Volker
id: '58951'
last_name: Grabs
citation:
ama: 'Austermann J, Borcherding H, Stichweh H, Grabs V. High Efficient Modular Drive
System - An Ideal Approach for Green Intralogistics Applications. In: 2016
18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe).
Berlin ; Offenbach: VDE Verlag; 2016:1639-1646. doi:10.1109/EPE.2016.7695687'
apa: 'Austermann, J., Borcherding, H., Stichweh, H., & Grabs, V. (2016). High
Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications.
In 2016 18th European Conference on Power Electronics and Applications (EPE’16
ECCE Europe) (pp. 1639–1646). Berlin ; Offenbach: VDE Verlag. https://doi.org/10.1109/EPE.2016.7695687'
bjps: 'Austermann J et al. (2016) High Efficient Modular Drive System
- An Ideal Approach for Green Intralogistics Applications. 2016 18th European
Conference on Power Electronics and Applications (EPE’16 ECCE Europe). Berlin ;
Offenbach: VDE Verlag, pp. 1639–1646.'
chicago: 'Austermann, Johann, Holger Borcherding, H. Stichweh, and Volker Grabs.
“High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics
Applications.” In 2016 18th European Conference on Power Electronics and Applications
(EPE’16 ECCE Europe), 1639–46. Berlin ; Offenbach: VDE Verlag, 2016. https://doi.org/10.1109/EPE.2016.7695687.'
chicago-de: 'Austermann, Johann, Holger Borcherding, H. Stichweh und Volker Grabs.
2016. High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics
Applications. In: 2016 18th European Conference on Power Electronics and Applications
(EPE’16 ECCE Europe), 1639–1646. Berlin ; Offenbach: VDE Verlag. doi:10.1109/EPE.2016.7695687,
.'
din1505-2-1: 'Austermann, Johann ;
Borcherding, Holger ; Stichweh,
H. ; Grabs, Volker: High
Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications.
In: 2016 18th European Conference on Power Electronics and Applications (EPE’16
ECCE Europe). Berlin ; Offenbach : VDE Verlag, 2016, S. 1639–1646'
havard: 'J. Austermann, H. Borcherding, H. Stichweh, V. Grabs, High Efficient Modular
Drive System - An Ideal Approach for Green Intralogistics Applications, in: 2016
18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe),
VDE Verlag, Berlin ; Offenbach, 2016: pp. 1639–1646.'
ieee: J. Austermann, H. Borcherding, H. Stichweh, and V. Grabs, “High Efficient
Modular Drive System - An Ideal Approach for Green Intralogistics Applications,”
in 2016 18th European Conference on Power Electronics and Applications (EPE’16
ECCE Europe), Karlsruhe, 2016, pp. 1639–1646.
mla: Austermann, Johann, et al. “High Efficient Modular Drive System - An Ideal
Approach for Green Intralogistics Applications.” 2016 18th European Conference
on Power Electronics and Applications (EPE’16 ECCE Europe), VDE Verlag, 2016,
pp. 1639–46, doi:10.1109/EPE.2016.7695687.
short: 'J. Austermann, H. Borcherding, H. Stichweh, V. Grabs, in: 2016 18th European
Conference on Power Electronics and Applications (EPE’16 ECCE Europe), VDE Verlag,
Berlin ; Offenbach, 2016, pp. 1639–1646.'
ufg: 'Austermann, Johann et. al. (2016): High Efficient Modular Drive System
- An Ideal Approach for Green Intralogistics Applications, in: 2016 18th European
Conference on Power Electronics and Applications (EPE’16 ECCE Europe), Berlin ;
Offenbach, S. 1639–1646.'
van: 'Austermann J, Borcherding H, Stichweh H, Grabs V. High Efficient Modular Drive
System - An Ideal Approach for Green Intralogistics Applications. In: 2016 18th
European Conference on Power Electronics and Applications (EPE’16 ECCE Europe).
Berlin ; Offenbach: VDE Verlag; 2016. p. 1639–46.'
conference:
end_date: 2016-05-09
location: Karlsruhe
name: 18th European Conference on Power Electronics and Applications
start_date: 2016-09-05
date_created: 2018-11-27T10:16:16Z
date_updated: 2023-03-15T13:49:42Z
ddc:
- '620'
department:
- _id: DEP5018
doi: 10.1109/EPE.2016.7695687
keyword:
- electric current control
- induction motors
- invertors
- permanent magnet motors
- reluctance motors
- sensorless machine control
- torque control
- modular solution kit
- intralogistic drives
- automated warehouse
- energy consumption reduction
- optimized components interaction
- induction motor
- synchronous reluctance motor
- permanent magnet synchronous machine
- sensorless control technique
- signal injection
- rotor position
- motor current
- MTPA-control
- regeneration unit
- DC link
- frequency inverters
- buck converter
- synchronous inverter
- line-filter
- Induction motors
- Reluctance motors
- Permanent magnet motors
- Rotors
- Torque
- Inverters
- intralogistics
- reluctance motor
- sensorless control
- regeneration unit
- braking energy
language:
- iso: eng
page: 1639-1646
place: Berlin ; Offenbach
publication: 2016 18th European Conference on Power Electronics and Applications (EPE'16
ECCE Europe)
publication_identifier:
isbn:
- 978-3-8007-4186-1
publisher: VDE Verlag
related_material:
link:
- relation: contains
url: https://ieeexplore.ieee.org/document/7695687
status: public
title: High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics
Applications
type: conference
user_id: '45673'
year: 2016
...
---
_id: '11142'
abstract:
- lang: eng
text: This dissertation proposes and investigates an isochronous wireless network
for industrial control applications with guaranteed latencies and jitter. Based
on a requirements analysis of real industrial applications and the characterisation
of the wireless channel, the solution approach is developed. It consists of a
TDMA-based medium access control, a dynamic resource allocation and the provision
of a global time base for the wired and the wireless network. Due to the global
time base, the solution approach allows a seamless and synchronous integration
into existing wired Real-time Ethernet systems.
author:
- first_name: Henning
full_name: Trsek, Henning
last_name: Trsek
citation:
ama: Trsek H. Isochronous Wireless Network for Real-Time Communication in Industrial
Automation. Springer ; 2016. doi:10.1007/978-3-662-49158-4
apa: Trsek, H. (2016). Isochronous Wireless Network for Real-time Communication
in Industrial Automation. Springer . https://doi.org/10.1007/978-3-662-49158-4
bjps: 'Trsek H (2016) Isochronous Wireless Network for Real-Time Communication
in Industrial Automation. Berlin, Heidelberg: Springer .'
chicago: 'Trsek, Henning. Isochronous Wireless Network for Real-Time Communication
in Industrial Automation. Technologien Für Die Intelligente Automation. Berlin,
Heidelberg: Springer , 2016. https://doi.org/10.1007/978-3-662-49158-4.'
chicago-de: 'Trsek, Henning. 2016. Isochronous Wireless Network for Real-time
Communication in Industrial Automation. Technologien für die intelligente
Automation. Berlin, Heidelberg: Springer . doi:10.1007/978-3-662-49158-4,
.'
din1505-2-1: 'Trsek, Henning: Isochronous
Wireless Network for Real-time Communication in Industrial Automation, Technologien
für die intelligente Automation. Berlin, Heidelberg : Springer , 2016'
havard: H. Trsek, Isochronous Wireless Network for Real-time Communication in Industrial
Automation, Springer , Berlin, Heidelberg, 2016.
ieee: 'H. Trsek, Isochronous Wireless Network for Real-time Communication in
Industrial Automation. Berlin, Heidelberg: Springer , 2016. doi: 10.1007/978-3-662-49158-4.'
mla: Trsek, Henning. Isochronous Wireless Network for Real-Time Communication
in Industrial Automation. Springer , 2016, https://doi.org/10.1007/978-3-662-49158-4.
short: H. Trsek, Isochronous Wireless Network for Real-Time Communication in Industrial
Automation, Springer , Berlin, Heidelberg, 2016.
ufg: 'Trsek, Henning: Isochronous Wireless Network for Real-time Communication
in Industrial Automation, Berlin, Heidelberg 2016 (Technologien für die intelligente
Automation).'
van: 'Trsek H. Isochronous Wireless Network for Real-time Communication in Industrial
Automation. Berlin, Heidelberg: Springer ; 2016. (Technologien für die intelligente
Automation).'
date_created: 2024-03-01T08:09:01Z
date_updated: 2024-03-05T14:34:59Z
department:
- _id: DEP5023
doi: 10.1007/978-3-662-49158-4
keyword:
- industrial wireless system
- wireless real-time communication
- deterministic medium access control
- isochronous WLAN
- industrial automation
language:
- iso: eng
place: Berlin, Heidelberg
publication_identifier:
eisbn:
- 978-3-662-49158-4
eissn:
- 2522-8587
isbn:
- 978-3-662-49157-7
issn:
- '2522-8579 '
publication_status: published
publisher: 'Springer '
series_title: Technologien für die intelligente Automation
status: public
title: Isochronous Wireless Network for Real-time Communication in Industrial Automation
type: dissertation
user_id: '83781'
year: '2016'
...
---
_id: '597'
abstract:
- lang: eng
text: "This paper is aimed to discuss current research using data mining techniques
and industry statistics in production environments. The general research approach
is based on the idea of using data mining processes and techniques of industry
statistics to find rare and hidden patterns behind failures of complex components.
A case study will be applied to illustrate how the technique is carried out and
where the limits of this approach occur. The case study deals with a component
supplier of printing machines, which received an increasing number of client complaints,
all related to one distinct problem. The observed failures seem to occur only
among clients with very high quality standards. The affected component undergoes
a very complex production process with several steps in different departments.
Every single production unit records data information from multiple process variables
and at different points in time. In the beginning there was no understanding of
the failure causes in production at all. Therefore a huge amount of production
data had to be analyzed to find the pattern that discloses the failure.\r\nThe
data mining process starts with a first step in which the given data sets are
prepared and then cleaned. Followed up by building a prediction model. The aim
is to detect the root causes for failures and to predict potential failures in
affected components. This paper shows how to use data mining to get the answer
on pressing production failures.\r\n"
author:
- first_name: Eva
full_name: Scheideler, Eva
id: '61522'
last_name: Scheideler
- first_name: Andrea
full_name: Ahlemeyer-Stubbe, Andrea
last_name: Ahlemeyer-Stubbe
citation:
ama: 'Scheideler E, Ahlemeyer-Stubbe A. Data Mining: A Potential Detector to Find
Failure in Complex Components. In: Padoano E, Villmer FJ, Department of Production
Engineering and Management, Hochschule Ostwestfalen-Lippe, eds. Production
Engineering and Management : Proceedings, 5th International Conference, October
1 and 2, 2015, Trieste, Italy. Hochschule Ostwestfalen-Lippe; 2015:163-174.'
apa: 'Scheideler, E., & Ahlemeyer-Stubbe, A. (2015). Data Mining: A Potential
Detector to Find Failure in Complex Components. In E. Padoano, F.-J. Villmer,
Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe
(Eds.), Production engineering and management : proceedings, 5th international
conference, October 1 and 2, 2015, Trieste, Italy (Issue 1, pp. 163–174).
Hochschule Ostwestfalen-Lippe.'
bjps: 'Scheideler E and Ahlemeyer-Stubbe A (2015) Data Mining: A Potential
Detector to Find Failure in Complex Components. In Padoano E et al. (eds), Production
Engineering and Management : Proceedings, 5th International Conference, October
1 and 2, 2015, Trieste, Italy. Lemgo: Hochschule Ostwestfalen-Lippe, pp. 163–174.'
chicago: 'Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Data Mining: A Potential
Detector to Find Failure in Complex Components.” In Production Engineering
and Management : Proceedings, 5th International Conference, October 1 and 2, 2015,
Trieste, Italy, edited by Elio Padoano, Franz-Josef Villmer, Department of
Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, 163–74.
Lemgo: Hochschule Ostwestfalen-Lippe, 2015.'
chicago-de: 'Scheideler, Eva und Andrea Ahlemeyer-Stubbe. 2015. Data Mining: A Potential
Detector to Find Failure in Complex Components. In: Production engineering
and management : proceedings, 5th international conference, October 1 and 2, 2015,
Trieste, Italy, hg. von Elio Padoano, Franz-Josef Villmer, Department of Production
Engineering and Management, und Hochschule Ostwestfalen-Lippe, 163–174. Lemgo:
Hochschule Ostwestfalen-Lippe.'
din1505-2-1: 'Scheideler, Eva ; Ahlemeyer-Stubbe, Andrea: Data Mining:
A Potential Detector to Find Failure in Complex Components. In: Padoano,
E. ; Villmer, F.-J. ; Department of Production Engineering and Management
; Hochschule Ostwestfalen-Lippe
(Hrsg.): Production engineering and management : proceedings, 5th international
conference, October 1 and 2, 2015, Trieste, Italy. Lemgo : Hochschule Ostwestfalen-Lippe,
2015, S. 163–174'
havard: 'E. Scheideler, A. Ahlemeyer-Stubbe, Data Mining: A Potential Detector to
Find Failure in Complex Components, in: E. Padoano, F.-J. Villmer, Department
of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.),
Production Engineering and Management : Proceedings, 5th International Conference,
October 1 and 2, 2015, Trieste, Italy, Hochschule Ostwestfalen-Lippe, Lemgo, 2015:
pp. 163–174.'
ieee: 'E. Scheideler and A. Ahlemeyer-Stubbe, “Data Mining: A Potential Detector
to Find Failure in Complex Components,” in Production engineering and management :
proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy,
Trieste, Italy, 2015, no. 1, pp. 163–174.'
mla: 'Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Data Mining: A Potential Detector
to Find Failure in Complex Components.” Production Engineering and Management :
Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy,
edited by Elio Padoano et al., no. 1, Hochschule Ostwestfalen-Lippe, 2015, pp.
163–74.'
short: 'E. Scheideler, A. Ahlemeyer-Stubbe, in: E. Padoano, F.-J. Villmer, Department
of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.),
Production Engineering and Management : Proceedings, 5th International Conference,
October 1 and 2, 2015, Trieste, Italy, Hochschule Ostwestfalen-Lippe, Lemgo, 2015,
pp. 163–174.'
ufg: 'Scheideler, Eva/Ahlemeyer-Stubbe, Andrea: Data Mining: A Potential
Detector to Find Failure in Complex Components, in: Padoano, Elio u. a. (Hgg.):
Production engineering and management : proceedings, 5th international conference,
October 1 and 2, 2015, Trieste, Italy, Lemgo 2015, S. 163–174.'
van: 'Scheideler E, Ahlemeyer-Stubbe A. Data Mining: A Potential Detector to Find
Failure in Complex Components. In: Padoano E, Villmer FJ, Department of Production
Engineering and Management, Hochschule Ostwestfalen-Lippe, editors. Production
engineering and management : proceedings, 5th international conference, October
1 and 2, 2015, Trieste, Italy. Lemgo: Hochschule Ostwestfalen-Lippe; 2015. p.
163–74.'
conference:
end_date: 2015-10-02
location: Trieste, Italy
name: '5th International Conference "Production Engineering and Management" '
start_date: 2015-10-01
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-19T07:15:57Z
date_updated: 2024-03-22T13:12:47Z
department:
- _id: DEP7000
- _id: DEP1306
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
id: '14290'
last_name: Villmer
issue: '1'
keyword:
- Data mining
- production failure
- multi-variant analysis
- multivariate process control
- predictive modelling
- case study
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf
oa: '1'
page: 163-174
place: Lemgo
publication: 'Production engineering and management : proceedings, 5th international
conference, October 1 and 2, 2015, Trieste, Italy'
publication_identifier:
isbn:
- 978-3-941645-11-0
publication_status: published
publisher: Hochschule Ostwestfalen-Lippe
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf
status: public
title: 'Data Mining: A Potential Detector to Find Failure in Complex Components'
type: conference
user_id: '83781'
year: '2015'
...
---
_id: '486'
abstract:
- lang: eng
text: Growing market demands on enterprises and the resulting challenges for their
organization have been discussed for many years now. The flexibilty and mutability
of an enterprise are thereby considered as a significant factor for success.
author:
- first_name: Gert
full_name: Zülch, Gert
last_name: Zülch
- first_name: Thilo Gerhard
full_name: Gamber, Thilo Gerhard
id: '71451'
last_name: Gamber
- first_name: Patricia
full_name: Stock, Patricia
last_name: Stock
citation:
ama: 'Zülch G, Gamber TG, Stock P. Methodology for the Analysis of Simulation-Based
Decision-Making in the Manufacturing Area. In: Olhager J, Persson F, eds. Advances
in Production Management Systems. New York: Springer; 2007:337-344.'
apa: 'Zülch, G., Gamber, T. G., & Stock, P. (2007). Methodology for the Analysis
of Simulation-Based Decision-Making in the Manufacturing Area. In J. Olhager &
F. Persson (Eds.), Advances in Production Management Systems (pp. 337–344).
New York: Springer.'
bjps: 'Zülch G, Gamber TG and Stock P (2007) Methodology for the Analysis
of Simulation-Based Decision-Making in the Manufacturing Area. In Olhager J and
Persson F (eds), Advances in Production Management Systems. New York: Springer,
pp. 337–344.'
chicago: 'Zülch, Gert, Thilo Gerhard Gamber, and Patricia Stock. “Methodology for
the Analysis of Simulation-Based Decision-Making in the Manufacturing Area.” In
Advances in Production Management Systems, edited by Jan Olhager and Fredrik
Persson, 337–44. New York: Springer, 2007.'
chicago-de: 'Zülch, Gert, Thilo Gerhard Gamber und Patricia Stock. 2007. Methodology
for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area.
In: Advances in Production Management Systems, hg. von Jan Olhager und
Fredrik Persson, 337–344. New York: Springer.'
din1505-2-1: 'Zülch, Gert ; Gamber, Thilo Gerhard ; Stock,
Patricia: Methodology for the Analysis of Simulation-Based Decision-Making
in the Manufacturing Area. In: Olhager,
J. ; Persson, F. (Hrsg.):
Advances in Production Management Systems. New York : Springer, 2007, S. 337–344'
havard: 'G. Zülch, T.G. Gamber, P. Stock, Methodology for the Analysis of Simulation-Based
Decision-Making in the Manufacturing Area, in: J. Olhager, F. Persson (Eds.),
Advances in Production Management Systems, Springer, New York, 2007: pp. 337–344.'
ieee: G. Zülch, T. G. Gamber, and P. Stock, “Methodology for the Analysis of Simulation-Based
Decision-Making in the Manufacturing Area,” in Advances in Production Management
Systems, Linköping, 2007, pp. 337–344.
mla: Zülch, Gert, et al. “Methodology for the Analysis of Simulation-Based Decision-Making
in the Manufacturing Area.” Advances in Production Management Systems,
edited by Jan Olhager and Fredrik Persson, Springer, 2007, pp. 337–44.
short: 'G. Zülch, T.G. Gamber, P. Stock, in: J. Olhager, F. Persson (Eds.), Advances
in Production Management Systems, Springer, New York, 2007, pp. 337–344.'
ufg: 'Zülch, Gert et. al. (2007): Methodology for the Analysis of Simulation-Based
Decision-Making in the Manufacturing Area, in: Jan Olhager/Fredrik Persson (Hgg.):
Advances in Production Management Systems, New York, S. 337–344.'
van: 'Zülch G, Gamber TG, Stock P. Methodology for the Analysis of Simulation-Based
Decision-Making in the Manufacturing Area. In: Olhager J, Persson F, editors.
Advances in Production Management Systems. New York: Springer; 2007. p. 337–44.'
conference:
end_date: 2007-09-19
location: Linköping
name: International IFIP TC 5, WG 5.7 Conference on Advances in Production Management
Systems (APMS 2007)
start_date: 2007-09-17
date_created: 2019-01-30T07:51:48Z
date_updated: 2023-03-15T13:49:56Z
editor:
- first_name: Jan
full_name: Olhager, Jan
last_name: Olhager
- first_name: Fredrik
full_name: Persson, Fredrik
last_name: Persson
extern: '1'
keyword:
- production planning and control
- decision-making system
- personnel-oriented simulation
language:
- iso: eng
page: 337-344
place: New York
publication: Advances in Production Management Systems
publication_identifier:
isbn:
- 978-0-387-74157-4
publication_status: published
publisher: Springer
status: public
title: Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing
Area
type: conference
user_id: '74004'
year: 2007
...
---
_id: '4814'
abstract:
- lang: eng
text: In this paper, we present the Smart Dice Cup, a novel interaction device aimed
at gaming applications in smart home environments. The Smart Dice Cup is used
in a similar way as a traditional leather dice cup to generate random numbers.
Integrated accelerometers relate the shaking of the device to the resulting rolls
of the dice. In addition to an autonomous stand-alone mode, where the Smart Dice
Cup serves as self-sustained gaming system, the device is also capable of communicating
with its surrounding environment serving as an input device for other pervasive
gaming applications.
author:
- first_name: Carsten
full_name: Magerkurth, Carsten
last_name: Magerkurth
- first_name: Timo
full_name: Engelke, Timo
id: '75196'
last_name: Engelke
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Magerkurth C, Engelke T, Röcker C. The Smart Dice Cup: A Radio Controlled
Sentient Interaction Device. In: Harper R, Rauterberg M, Combetto M, eds. Entertainment
Computing - ICEC 2006. Lecture Notes in Computer Science. Berlin: Springer;
2006:211-216. doi:10.1007/11872320_25'
apa: 'Magerkurth, C., Engelke, T., & Röcker, C. (2006). The Smart Dice Cup:
A Radio Controlled Sentient Interaction Device. In R. Harper, M. Rauterberg, &
M. Combetto (Eds.), Entertainment Computing - ICEC 2006 (pp. 211–216).
Berlin: Springer. https://doi.org/10.1007/11872320_25'
bjps: 'Magerkurth C, Engelke T and Röcker C (2006) The Smart Dice Cup: A
Radio Controlled Sentient Interaction Device. In Harper R, Rauterberg M and Combetto
M (eds), Entertainment Computing - ICEC 2006. Berlin: Springer, pp. 211–216.'
chicago: 'Magerkurth, Carsten, Timo Engelke, and Carsten Röcker. “The Smart Dice
Cup: A Radio Controlled Sentient Interaction Device.” In Entertainment Computing
- ICEC 2006, edited by Richard Harper, Matthias Rauterberg, and Marco Combetto,
211–16. Lecture Notes in Computer Science. Berlin: Springer, 2006. https://doi.org/10.1007/11872320_25.'
chicago-de: 'Magerkurth, Carsten, Timo Engelke und Carsten Röcker. 2006. The Smart
Dice Cup: A Radio Controlled Sentient Interaction Device. In: Entertainment
Computing - ICEC 2006, hg. von Richard Harper, Matthias Rauterberg, und Marco Combetto,
211–216. Lecture Notes in Computer Science. Berlin: Springer. doi:10.1007/11872320_25,
.'
din1505-2-1: 'Magerkurth, Carsten
; Engelke, Timo ; Röcker,
Carsten: The Smart Dice Cup: A Radio Controlled Sentient Interaction Device.
In: Harper, R. ; Rauterberg,
M. ; Combetto, M. (Hrsg.):
Entertainment Computing - ICEC 2006, Lecture Notes in Computer Science.
Berlin : Springer, 2006, S. 211–216'
havard: 'C. Magerkurth, T. Engelke, C. Röcker, The Smart Dice Cup: A Radio Controlled
Sentient Interaction Device, in: R. Harper, M. Rauterberg, M. Combetto (Eds.),
Entertainment Computing - ICEC 2006, Springer, Berlin, 2006: pp. 211–216.'
ieee: 'C. Magerkurth, T. Engelke, and C. Röcker, “The Smart Dice Cup: A Radio Controlled
Sentient Interaction Device,” in Entertainment Computing - ICEC 2006, Cambridge,
UK, 2006, pp. 211–216.'
mla: 'Magerkurth, Carsten, et al. “The Smart Dice Cup: A Radio Controlled Sentient
Interaction Device.” Entertainment Computing - ICEC 2006, edited by Richard
Harper et al., Springer, 2006, pp. 211–16, doi:10.1007/11872320_25.'
short: 'C. Magerkurth, T. Engelke, C. Röcker, in: R. Harper, M. Rauterberg, M. Combetto
(Eds.), Entertainment Computing - ICEC 2006, Springer, Berlin, 2006, pp. 211–216.'
ufg: 'Magerkurth, Carsten et. al. (2006): The Smart Dice Cup: A Radio Controlled
Sentient Interaction Device, in: Richard Harper et. al. (Hgg.): Entertainment
Computing - ICEC 2006 (=Lecture Notes in Computer Science), Berlin,
S. 211–216.'
van: 'Magerkurth C, Engelke T, Röcker C. The Smart Dice Cup: A Radio Controlled
Sentient Interaction Device. In: Harper R, Rauterberg M, Combetto M, editors.
Entertainment Computing - ICEC 2006. Berlin: Springer; 2006. p. 211–6. (Lecture
Notes in Computer Science).'
conference:
end_date: 2006-09-22
location: Cambridge, UK
name: 5th International Conference - ICEC 2006
start_date: 2006-09-20
date_created: 2021-02-02T09:58:10Z
date_updated: 2023-03-15T13:49:55Z
department:
- _id: DEP5023
doi: 10.1007/11872320_25
editor:
- first_name: Richard
full_name: Harper, Richard
last_name: Harper
- first_name: 'Matthias '
full_name: 'Rauterberg, Matthias '
last_name: Rauterberg
- first_name: 'Marco '
full_name: 'Combetto, Marco '
last_name: Combetto
extern: '1'
keyword:
- Interaction Device
- Smart Home Environment
- Pervasive Game
- Remote Control Mode
- Ambient Intelligence Environment
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 211-216
place: Berlin
publication: Entertainment Computing - ICEC 2006
publication_identifier:
isbn:
- 978-3-540-45259-1
publication_status: published
publisher: Springer
series_title: Lecture Notes in Computer Science
status: public
title: 'The Smart Dice Cup: A Radio Controlled Sentient Interaction Device'
type: conference
user_id: '15514'
year: 2006
...
---
_id: '4815'
abstract:
- lang: eng
text: In this paper a concept is presented, that supports awareness and emotional
communication between family members, distributed over multiple intelligent home
environments. A technical communication infrastructure is presented, which allows
connecting different types of input and output devices. This platform is extended
by several examples of emotional user interfaces, which address the individual
needs of different user groups
author:
- first_name: Richard
full_name: Etter, Richard
last_name: Etter
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
- first_name: Daniel
full_name: Gilgen, Daniel
last_name: Gilgen
citation:
ama: 'Etter R, Röcker C, Gilgen D. Supporting Emotional Communication between Multiple
Users in Intelligent Home Environments. In: Proceedings of the Second International
Conference on Intelligent Environments (IE’06). London: IET; 2006:41-50. doi:10.1049/cp:20060623'
apa: 'Etter, R., Röcker, C., & Gilgen, D. (2006). Supporting Emotional Communication
between Multiple Users in Intelligent Home Environments. In Proceedings of
the Second International Conference on Intelligent Environments (IE’06) (pp.
41–50). London: IET. https://doi.org/10.1049/cp:20060623'
bjps: 'Etter R, Röcker C and Gilgen D (2006) Supporting Emotional Communication
between Multiple Users in Intelligent Home Environments. Proceedings of the
Second International Conference on Intelligent Environments (IE’06). London:
IET, pp. 41–50.'
chicago: 'Etter, Richard, Carsten Röcker, and Daniel Gilgen. “Supporting Emotional
Communication between Multiple Users in Intelligent Home Environments.” In Proceedings
of the Second International Conference on Intelligent Environments (IE’06),
41–50. London: IET, 2006. https://doi.org/10.1049/cp:20060623.'
chicago-de: 'Etter, Richard, Carsten Röcker und Daniel Gilgen. 2006. Supporting
Emotional Communication between Multiple Users in Intelligent Home Environments.
In: Proceedings of the Second International Conference on Intelligent Environments
(IE’06), 41–50. London: IET. doi:10.1049/cp:20060623,
.'
din1505-2-1: 'Etter, Richard ; Röcker, Carsten ; Gilgen,
Daniel: Supporting Emotional Communication between Multiple Users in Intelligent
Home Environments. In: Proceedings of the Second International Conference on
Intelligent Environments (IE’06). London : IET, 2006, S. 41–50'
havard: 'R. Etter, C. Röcker, D. Gilgen, Supporting Emotional Communication between
Multiple Users in Intelligent Home Environments, in: Proceedings of the Second
International Conference on Intelligent Environments (IE’06), IET, London, 2006:
pp. 41–50.'
ieee: R. Etter, C. Röcker, and D. Gilgen, “Supporting Emotional Communication between
Multiple Users in Intelligent Home Environments,” in Proceedings of the Second
International Conference on Intelligent Environments (IE’06), Athens, Greece,
2006, pp. 41–50.
mla: Etter, Richard, et al. “Supporting Emotional Communication between Multiple
Users in Intelligent Home Environments.” Proceedings of the Second International
Conference on Intelligent Environments (IE’06), IET, 2006, pp. 41–50, doi:10.1049/cp:20060623.
short: 'R. Etter, C. Röcker, D. Gilgen, in: Proceedings of the Second International
Conference on Intelligent Environments (IE’06), IET, London, 2006, pp. 41–50.'
ufg: 'Etter, Richard et. al. (2006): Supporting Emotional Communication between
Multiple Users in Intelligent Home Environments, in: Proceedings of the Second
International Conference on Intelligent Environments (IE’06), London, S. 41–50.'
van: 'Etter R, Röcker C, Gilgen D. Supporting Emotional Communication between Multiple
Users in Intelligent Home Environments. In: Proceedings of the Second International
Conference on Intelligent Environments (IE’06). London: IET; 2006. p. 41–50.'
conference:
end_date: 2006-07-06
location: Athens, Greece
name: 2nd IET International Conference on Intelligent Environments (IE 06)
start_date: 2006-05-07
date_created: 2021-02-02T09:59:30Z
date_updated: 2023-03-15T13:49:55Z
department:
- _id: DEP5023
doi: 10.1049/cp:20060623
extern: '1'
keyword:
- User interfaces
- Home computing
- Automated buildings
- Control engineering computing
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 41-50
place: London
publication: Proceedings of the Second International Conference on Intelligent Environments
(IE’06)
publication_identifier:
isbn:
- 978-0-86341-663-7
issn:
- 0537-9989
publication_status: published
publisher: IET
related_material:
link:
- relation: research_paper
url: https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwifnf-rhM7uAhWNO-wKHVa-BTAQFjAAegQIBRAC&url=http%3A%2F%2Fciteseerx.ist.psu.edu%2Fviewdoc%2Fdownload%3Fdoi%3D10.1.1.906.2354%26rep%3Drep1%26type%3Dpdf&usg=AOvVaw1oXsq3u2JITo6fIzezp0sI
status: public
title: Supporting Emotional Communication between Multiple Users in Intelligent Home
Environments
type: conference
user_id: '15514'
year: 2006
...
---
_id: '4824'
abstract:
- lang: eng
text: The integration of information, communication, and sensing technologies into
our everyday objects has created smart environments. Creating the smart artifacts
that constitute these environments requires augmenting their standard functionality
to support a new quality of interaction and behavior.A system-oriented, importunate
smartness approach creates an environment that gives individual smart artifacts
or the environment itself certain self-directed actions based on previously collected
information. For example, a space can be smart by having and exploiting knowledge
about the persons and artifacts currently situated within its borders.In contrast,
a people-oriented, empowering smartness approach places the empowering function
in the foreground by assuming that smart spaces make people smarter. This approach
empowers users to make decisions and take actions as mature and responsible people.Although
in some cases it might be more efficient if the system doesnýt ask for a userýs
feedback and confirmation at every step in an action chain, the overall design
rationale should aim to keep the user in the loop and in control whenever possible.
author:
- first_name: Norbert
full_name: Streitz, Norbert
last_name: Streitz
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
- first_name: Thorsten
full_name: Prante, Thorsten
last_name: Prante
- first_name: Daniel
full_name: van Alphen, Daniel
last_name: van Alphen
- first_name: Richard
full_name: Stenzel, Richard
last_name: Stenzel
- first_name: Carsten
full_name: Magerkurth, Carsten
last_name: Magerkurth
citation:
ama: 'Streitz N, Röcker C, Prante T, van Alphen D, Stenzel R, Magerkurth C. Designing
Smart Artifacts for Smart Environments. Computer : innovative technology for
computer professionals . 2005;38(3):41 – 49. doi:10.1109/MC.2005.92'
apa: 'Streitz, N., Röcker, C., Prante, T., van Alphen, D., Stenzel, R., & Magerkurth,
C. (2005). Designing Smart Artifacts for Smart Environments. Computer : Innovative
Technology for Computer Professionals , 38(3), 41 – 49. https://doi.org/10.1109/MC.2005.92'
bjps: 'Streitz N et al. (2005) Designing Smart Artifacts for Smart
Environments. Computer : innovative technology for computer professionals
38, 41 – 49.'
chicago: 'Streitz, Norbert, Carsten Röcker, Thorsten Prante, Daniel van Alphen,
Richard Stenzel, and Carsten Magerkurth. “Designing Smart Artifacts for Smart
Environments.” Computer : Innovative Technology for Computer Professionals
38, no. 3 (2005): 41 – 49. https://doi.org/10.1109/MC.2005.92.'
chicago-de: 'Streitz, Norbert, Carsten Röcker, Thorsten Prante, Daniel van Alphen,
Richard Stenzel und Carsten Magerkurth. 2005. Designing Smart Artifacts for Smart
Environments. Computer : innovative technology for computer professionals
38, Nr. 3: 41 – 49. doi:10.1109/MC.2005.92,
.'
din1505-2-1: 'Streitz, Norbert ; Röcker, Carsten ; Prante,
Thorsten ; van Alphen, Daniel
; Stenzel, Richard ; Magerkurth,
Carsten: Designing Smart Artifacts for Smart Environments. In: Computer :
innovative technology for computer professionals Bd. 38. Piscataway, NJ,
IEEE (2005), Nr. 3, S. 41 – 49'
havard: 'N. Streitz, C. Röcker, T. Prante, D. van Alphen, R. Stenzel, C. Magerkurth,
Designing Smart Artifacts for Smart Environments, Computer : Innovative Technology
for Computer Professionals . 38 (2005) 41 – 49.'
ieee: 'N. Streitz, C. Röcker, T. Prante, D. van Alphen, R. Stenzel, and C. Magerkurth,
“Designing Smart Artifacts for Smart Environments,” Computer : innovative technology
for computer professionals , vol. 38, no. 3, pp. 41 – 49, 2005.'
mla: 'Streitz, Norbert, et al. “Designing Smart Artifacts for Smart Environments.”
Computer : Innovative Technology for Computer Professionals , vol. 38,
no. 3, IEEE, 2005, pp. 41 – 49, doi:10.1109/MC.2005.92.'
short: 'N. Streitz, C. Röcker, T. Prante, D. van Alphen, R. Stenzel, C. Magerkurth,
Computer : Innovative Technology for Computer Professionals 38 (2005) 41 – 49.'
ufg: 'Streitz, Norbert et. al. (2005): Designing Smart Artifacts for Smart
Environments, in: Computer : innovative technology for computer professionals
38 (3), S. 41 – 49.'
van: 'Streitz N, Röcker C, Prante T, van Alphen D, Stenzel R, Magerkurth C. Designing
Smart Artifacts for Smart Environments. Computer : innovative technology for computer
professionals . 2005;38(3):41 – 49.'
date_created: 2021-02-02T10:09:09Z
date_updated: 2023-03-15T13:49:56Z
department:
- _id: DEP5023
doi: 10.1109/MC.2005.92
extern: '1'
intvolume: ' 38'
issue: '3'
keyword:
- Personal digital assistants
- Refrigeration
- Portable computers
- Control systems
- Roads
- Availability
- Cellular phones
- Communications technology
- Humans
- Smart homes
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 41 – 49
place: Piscataway, NJ
publication: 'Computer : innovative technology for computer professionals '
publication_identifier:
eissn:
- '1558-0814 '
issn:
- '0018-9162 '
publication_status: published
publisher: IEEE
status: public
title: Designing Smart Artifacts for Smart Environments
type: journal_article
user_id: '15514'
volume: 38
year: 2005
...