---
_id: '9210'
abstract:
- lang: eng
  text: In order to guarantee long lifetime and high performance of electrical contacts,
    a plating is usually applied on the base material. Silver is a promising plating
    material because of a good balance between performance and costs. The conventional
    silver plating is soft; therefore, a thick silver plating should be used to prevent
    the wear through during the operation. In order to enhance the wear resistance
    and prolong the lifetime of the silver plating, silver platings are modified by
    co-depositing nanoparticles with a core/shell structure into the silver matrix.
    A novel method to prepare the Ag (shell)@Al 2 O 3 (core) nanoparticles by galvanic
    process is introduced in this paper. The influence of fabrication parameters in
    the galvanic process such as the concentration of silver nitrate solution and
    the plating voltage on the silver content in the Ag@Al 2 O 3 nanoparticles is
    investigated. Afterwards, different concentrations of core/shell nanoparticles
    are co-deposited into the silver plating to study the effect of nanoparticles
    on the microhardness, microstructure and the lifetime of the silver plating. As
    a result, the microhardness and the lifetime of the silver plating are significantly
    improved and a favorable nanoparticle concentration exists for the longest lifetime.
    Moreover, the mechanism of the lifetime improvement is determined.
author:
- first_name: Haomiao
  full_name: Yuan, Haomiao
  id: '61860'
  last_name: Yuan
- first_name: Roman
  full_name: Probst, Roman
  id: '69156'
  last_name: Probst
- first_name: Jian
  full_name: Song, Jian
  id: '5297'
  last_name: Song
citation:
  ama: Yuan H, Probst R, Song J. <i>Influence of Core/Shell Nanoparticles on the Fretting
    Behavior of Electrical Contacts</i>. IEEE; 2022:166-173. doi:<a href="https://doi.org/10.1109/HLM54538.2022.9969773">10.1109/HLM54538.2022.9969773</a>
  apa: 'Yuan, H., Probst, R., &#38; Song, J. (2022). Influence of Core/Shell Nanoparticles
    on the Fretting Behavior of Electrical Contacts. In <i>Electrical contacts - 2022 :
    proceedings of the Sixty-Seventh IEEE Holm Conference on Electrical Contacts</i>
    (pp. 166–173). IEEE. <a href="https://doi.org/10.1109/HLM54538.2022.9969773">https://doi.org/10.1109/HLM54538.2022.9969773</a>'
  bjps: '<b>Yuan H, Probst R and Song J</b> (2022) <i>Influence of Core/Shell Nanoparticles
    on the Fretting Behavior of Electrical Contacts</i>. Piscataway, NJ: IEEE.'
  chicago: 'Yuan, Haomiao, Roman Probst, and Jian Song. <i>Influence of Core/Shell
    Nanoparticles on the Fretting Behavior of Electrical Contacts</i>. <i>Electrical
    Contacts - 2022 : Proceedings of the Sixty-Seventh IEEE Holm Conference on Electrical
    Contacts</i>. Piscataway, NJ: IEEE, 2022. <a href="https://doi.org/10.1109/HLM54538.2022.9969773">https://doi.org/10.1109/HLM54538.2022.9969773</a>.'
  chicago-de: 'Yuan, Haomiao, Roman Probst und Jian Song. 2022. <i>Influence of Core/Shell
    Nanoparticles on the Fretting Behavior of Electrical Contacts</i>. <i>Electrical
    contacts - 2022 : proceedings of the Sixty-Seventh IEEE Holm Conference on Electrical
    Contacts</i>. Piscataway, NJ: IEEE. doi:<a href="https://doi.org/10.1109/HLM54538.2022.9969773">10.1109/HLM54538.2022.9969773</a>,
    .'
  din1505-2-1: '<span style="font-variant:small-caps;">Yuan, Haomiao</span> ; <span
    style="font-variant:small-caps;">Probst, Roman</span> ; <span style="font-variant:small-caps;">Song,
    Jian</span>: <i>Influence of Core/Shell Nanoparticles on the Fretting Behavior
    of Electrical Contacts</i>. Piscataway, NJ : IEEE, 2022'
  havard: H. Yuan, R. Probst, J. Song, Influence of Core/Shell Nanoparticles on the
    Fretting Behavior of Electrical Contacts, IEEE, Piscataway, NJ, 2022.
  ieee: 'H. Yuan, R. Probst, and J. Song, <i>Influence of Core/Shell Nanoparticles
    on the Fretting Behavior of Electrical Contacts</i>. Piscataway, NJ: IEEE, 2022,
    pp. 166–173. doi: <a href="https://doi.org/10.1109/HLM54538.2022.9969773">10.1109/HLM54538.2022.9969773</a>.'
  mla: 'Yuan, Haomiao, et al. “Influence of Core/Shell Nanoparticles on the Fretting
    Behavior of Electrical Contacts.” <i>Electrical Contacts - 2022 : Proceedings
    of the Sixty-Seventh IEEE Holm Conference on Electrical Contacts</i>, IEEE, 2022,
    pp. 166–73, <a href="https://doi.org/10.1109/HLM54538.2022.9969773">https://doi.org/10.1109/HLM54538.2022.9969773</a>.'
  short: H. Yuan, R. Probst, J. Song, Influence of Core/Shell Nanoparticles on the
    Fretting Behavior of Electrical Contacts, IEEE, Piscataway, NJ, 2022.
  ufg: '<b>Yuan, Haomiao/Probst, Roman/Song, Jian</b>: Influence of Core/Shell Nanoparticles
    on the Fretting Behavior of Electrical Contacts, Piscataway, NJ 2022.'
  van: 'Yuan H, Probst R, Song J. Influence of Core/Shell Nanoparticles on the Fretting
    Behavior of Electrical Contacts. Electrical contacts - 2022 : proceedings of the
    Sixty-Seventh IEEE Holm Conference on Electrical Contacts. Piscataway, NJ: IEEE;
    2022.'
conference:
  end_date: 2022-10-26
  location: ' Tampa, FL, USA'
  name: 67th Holm Conference on Electrical Contacts
  start_date: 2022-10-23
date_created: 2022-12-11T13:46:02Z
date_updated: 2024-08-05T08:01:04Z
department:
- _id: DEP6012
doi: 10.1109/HLM54538.2022.9969773
keyword:
- Nanoparticles
- Resistance
- Fabrication
- Silver
- Costs
- Contacts
- Voltage
language:
- iso: eng
page: 166 - 173
place: Piscataway, NJ
publication: 'Electrical contacts - 2022 : proceedings of the Sixty-Seventh IEEE Holm
  Conference on Electrical Contacts'
publication_identifier:
  eissn:
  - 978-1-6654-5965-5
  isbn:
  - 978-1-6654-5966-2
  - 978-1-6654-5967-9
  issn:
  - 2158-9992
publication_status: published
publisher: IEEE
status: public
title: Influence of Core/Shell Nanoparticles on the Fretting Behavior of Electrical
  Contacts
type: conference_editor_article
user_id: '83781'
year: '2022'
...
---
_id: '560'
abstract:
- lang: eng
  text: In warehouse planning and dimensioning, many parameters and conditions have
    to be met and goals must be fulfilled, e.g. labor and investment costs, desired
    throughput and capacity, available material handling technologies and size constraints.
    These factors determine the ultimate choice of a particular alternative from a
    wide range of solution alternatives.On the one hand, the warehouse planning process
    is very complex and takes into account all different aspects of decision-making.
    On the other hand, it is expected that the planning period is shorter and shorter.
    To balance out the competing interests of accuracy and time, it is a promising
    approach to make use of computer-based planning tools. They can be used to find
    the most cost-efficientalternative and to visualize its layout.In addition, at
    the end of the planning process not only technologies and layout dimensions are
    specified, the warehouse layout with the rack configuration, the conveyors and
    the buildings should be visualized in three dimensions.It is a promising approach
    to integrate the detailed layout drawing through computer-aideddesign tools such
    as AutoCAD Inventor into warehouse planning process. Softwareis developed for
    detailed warehouse planning. The core modules of the software can generate a favorable
    warehouse alternative and an AutoCAD-Add-On for the visualization of the outcomes.With
    the planning tool,the planning period can be significantly shortened while simultaneously
    the planning quality, especially during the period of rough planning, increases.To
    balance out the competing interests of accuracy and time, it is a promising approach
    to make use ofcomputer-basedplanning tools. They can be used to find the most
    cost-efficientalternative and to visualize its layout.
author:
- first_name: L.
  full_name: Schulze, L.
  last_name: Schulze
- first_name: Li
  full_name: Li, Li
  id: '58482'
  last_name: Li
citation:
  ama: 'Schulze L, Li L. Digitized Planning with Visualization for Warehouse Layouts.
    In: Villmer F-J, Padoano E, Department of Production Engineering and Management,
    eds. <i>Production Engineering and Management</i>. Lemgo; 2018:233-242.'
  apa: Schulze, L., &#38; Li, L. (2018). Digitized Planning with Visualization for
    Warehouse Layouts. In F.-J. Villmer, E. Padoano, &#38; Department of Production
    Engineering and Management (Eds.), <i>Production Engineering and Management</i>
    (pp. 233–242). Lemgo.
  bjps: <b>Schulze L and Li L</b> (2018) Digitized Planning with Visualization for
    Warehouse Layouts. In Villmer F-J, Padoano E and Department of Production Engineering
    and Management (eds), <i>Production Engineering and Management</i>. Lemgo, pp.
    233–242.
  chicago: Schulze, L., and Li Li. “Digitized Planning with Visualization for Warehouse
    Layouts.” In <i>Production Engineering and Management</i>, edited by Franz-Josef
    Villmer, Elio Padoano, and Department of Production Engineering and Management,
    233–42. Lemgo, 2018.
  chicago-de: 'Schulze, L. und Li Li. 2018. Digitized Planning with Visualization
    for Warehouse Layouts. In: <i>Production Engineering and Management</i>, hg. von
    Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and
    Management, 233–242. Lemgo.'
  din1505-2-1: '<span style="font-variant:small-caps;">Schulze, L.</span> ; <span
    style="font-variant:small-caps;">Li, Li</span>: Digitized Planning with Visualization
    for Warehouse Layouts. In: <span style="font-variant:small-caps;">Villmer, F.-J.</span>
    ; <span style="font-variant:small-caps;">Padoano, E.</span> ; <span style="font-variant:small-caps;">Department
    of Production Engineering and Management</span> (Hrsg.): <i>Production Engineering
    and Management</i>. Lemgo, 2018, S. 233–242'
  havard: 'L. Schulze, L. Li, Digitized Planning with Visualization for Warehouse
    Layouts, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and
    Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp. 233–242.'
  ieee: L. Schulze and L. Li, “Digitized Planning with Visualization for Warehouse
    Layouts,” in <i>Production Engineering and Management</i>, Lemgo, 2018, no. 1,
    pp. 233–242.
  mla: Schulze, L., and Li Li. “Digitized Planning with Visualization for Warehouse
    Layouts.” <i>Production Engineering and Management</i>, edited by Franz-Josef
    Villmer et al., no. 1, 2018, pp. 233–42.
  short: 'L. Schulze, L. Li, in: F.-J. Villmer, E. Padoano, Department of Production
    Engineering and Management (Eds.), Production Engineering and Management, Lemgo,
    2018, pp. 233–242.'
  ufg: '<b>Schulze, L./Li, Li (2018)</b>: Digitized Planning with Visualization for
    Warehouse Layouts, in: Franz-Josef Villmer et. al. (Hgg.): <i>Production Engineering
    and Management</i>, Lemgo, S. 233–242.'
  van: 'Schulze L, Li L. Digitized Planning with Visualization for Warehouse Layouts.
    In: Villmer F-J, Padoano E, Department of Production Engineering and Management,
    editors. Production Engineering and Management. Lemgo; 2018. p. 233–42.'
conference:
  end_date: 2018-10-05
  location: Lemgo
  name: Proceedings 8th International Conference
  start_date: 2018-10-04
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-13T16:05:34Z
date_updated: 2023-03-15T13:50:00Z
department:
- _id: DEP7000
- _id: DEP1306
editor:
- first_name: Franz-Josef
  full_name: Villmer, Franz-Josef
  last_name: Villmer
- first_name: Elio
  full_name: Padoano, Elio
  last_name: Padoano
issue: '1'
keyword:
- Warehouse planning
- Layout configuration
- Labor and investment costs
language:
- iso: eng
main_file_link:
- open_access: '1'
  url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf
oa: '1'
page: 233-242
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
  isbn:
  - 978-3-946856-03-0
publication_status: published
related_material:
  link:
  - relation: contains
    url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf
status: public
title: Digitized Planning with Visualization for Warehouse Layouts
type: conference
user_id: '45673'
year: 2018
...
---
_id: '590'
abstract:
- lang: eng
  text: Against the background of rising overhead costs in manufacturing companies
    the application of methods of overhead cost management is of increasing importance.
    Within this article existing approaches of cost management are explained in principle.
    Based on these approaches a new complementary approach of managing costs with
    the help of costs elasticity ratios is described by a case study. The method is
    based on the hypothesis that there are no fixed personnel costs, but personnel
    costs with different elasticity with respect to the volume of orders. Personnel
    costs elasticity (ε) is derived from the quotient of the relative change in personnel
    costs (k) and the relative change of the order volume (q) of a billing month (i).
    The method aims to increase the flexibility of overhead costs, but can also be
    applied with respect to so-called direct costs. In this case, the question arises
    as to what extent the direct costs actually develop proportional elastic over
    time.
author:
- first_name: Sven
  full_name: Hinrichsen, Sven
  id: '49010'
  last_name: Hinrichsen
citation:
  ama: 'Hinrichsen S. How Elasticity Indicators Support Cost Management. In: Villmer
    FJ, Padoano E, Department of Production Engineering and Management, Hochschule
    Ostwestfalen-Lippe, eds. <i>Production Engineering and Management</i>. ; 2016:123-131.'
  apa: Hinrichsen, S. (2016). How Elasticity Indicators Support Cost Management. In
    F.-J. Villmer, E. Padoano, Department of Production Engineering and Management,
    &#38; Hochschule Ostwestfalen-Lippe (Eds.), <i>Production Engineering and Management</i>
    (Issue 1, pp. 123–131).
  bjps: <b>Hinrichsen S</b> (2016) How Elasticity Indicators Support Cost Management.
    In Villmer F-J et al. (eds), <i>Production Engineering and Management</i>. Lemgo,
    pp. 123–131.
  chicago: Hinrichsen, Sven. “How Elasticity Indicators Support Cost Management.”
    In <i>Production Engineering and Management</i>, edited by Franz-Josef Villmer,
    Elio Padoano, Department of Production Engineering and Management, and Hochschule
    Ostwestfalen-Lippe, 123–31. Lemgo, 2016.
  chicago-de: 'Hinrichsen, Sven. 2016. How Elasticity Indicators Support Cost Management.
    In: <i>Production Engineering and Management</i>, hg. von Franz-Josef Villmer,
    Elio Padoano, Department of Production Engineering and Management, und Hochschule
    Ostwestfalen-Lippe, 123–131. Lemgo.'
  din1505-2-1: '<span style="font-variant:small-caps;">Hinrichsen, Sven</span>: How
    Elasticity Indicators Support Cost Management. In: <span style="font-variant:small-caps;">Villmer,
    F.-J.</span> ; <span style="font-variant:small-caps;">Padoano, E.</span> ; <span
    style="font-variant:small-caps;">Department of Production Engineering and Management</span>
    ; <span style="font-variant:small-caps;">Hochschule Ostwestfalen-Lippe</span>
    (Hrsg.): <i>Production Engineering and Management</i>. Lemgo, 2016, S. 123–131'
  havard: 'S. Hinrichsen, How Elasticity Indicators Support Cost Management, in: F.-J.
    Villmer, E. Padoano, Department of Production Engineering and Management, Hochschule
    Ostwestfalen-Lippe (Eds.), Production Engineering and Management, Lemgo, 2016:
    pp. 123–131.'
  ieee: S. Hinrichsen, “How Elasticity Indicators Support Cost Management,” in <i>Production
    Engineering and Management</i>, Lemgo, 2016, no. 1, pp. 123–131.
  mla: Hinrichsen, Sven. “How Elasticity Indicators Support Cost Management.” <i>Production
    Engineering and Management</i>, edited by Franz-Josef Villmer et al., no. 1, 2016,
    pp. 123–31.
  short: 'S. Hinrichsen, in: F.-J. Villmer, E. Padoano, Department of Production Engineering
    and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and
    Management, Lemgo, 2016, pp. 123–131.'
  ufg: '<b>Hinrichsen, Sven</b>: How Elasticity Indicators Support Cost Management,
    in: <i>Villmer, Franz-Josef u. a. (Hgg.)</i>: Production Engineering and Management,
    Lemgo 2016,  S. 123–131.'
  van: 'Hinrichsen S. How Elasticity Indicators Support Cost Management. In: Villmer
    FJ, Padoano E, Department of Production Engineering and Management, Hochschule
    Ostwestfalen-Lippe, editors. Production Engineering and Management. Lemgo; 2016.
    p. 123–31.'
conference:
  end_date: 2016-09-30
  location: Lemgo
  name: Proceedings 6th International Conference
  start_date: 2016-09-29
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-18T15:23:42Z
date_updated: 2023-04-14T11:37:27Z
ddc:
- '330'
department:
- _id: DEP1306
- _id: DEP7020
editor:
- first_name: Franz-Josef
  full_name: Villmer, Franz-Josef
  last_name: Villmer
- first_name: Elio
  full_name: Padoano, Elio
  last_name: Padoano
file:
- access_level: open_access
  content_type: application/pdf
  creator: mqc-p4h
  date_created: 2023-04-14T11:36:14Z
  date_updated: 2023-04-14T11:36:14Z
  file_id: '9701'
  file_name: PEM 2016 paper Hinrichsen final.pdf
  file_size: 130007
  relation: main_file
  success: 1
file_date_updated: 2023-04-14T11:36:14Z
has_accepted_license: '1'
issue: '1'
keyword:
- Cost management
- Overhead costs
- Direct costs
- Labor costs
- Elasticity
language:
- iso: eng
oa: '1'
page: 123-131
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
  isbn:
  - 978-3-946856-00-9
publication_status: published
status: public
title: How Elasticity Indicators Support Cost Management
type: conference
user_id: '49010'
year: '2016'
...
---
_id: '598'
abstract:
- lang: eng
  text: "The aerospace sector is characterized by long product life cycles and a need
    for lightweight design. Additive manufacturing is a technology that produces parts
    layer by layer and thus enables the manufacturing of any complex parts at nearly
    no extra costs. A topology optimization enhances the part’s\r\nperformance for
    their special purpose. The results are often complex bionic structures that cannot
    be produced with conventional manufacturing technologies. The paper analyzes how
    the high potential of this technologycan be applied to aerospace parts. A topology
    optimization will be conducted for an aircraft part explaining the crucial points
    and a life cycle analysis examines the achieved sustainable improvements for the
    aircraft’s life cycle.\r\n"
author:
- first_name: Andrea
  full_name: Huxol, Andrea
  id: '43559'
  last_name: Huxol
- first_name: Franz-Josef
  full_name: Villmer, Franz-Josef
  id: '14290'
  last_name: Villmer
citation:
  ama: 'Huxol A, Villmer F-J. Hybrid Manufacturing Machines: Combining Additive and
    Subtractive Manufacturing Technologies. In: Padoano E, Villmer F-J, Department
    of Production Engineering and Management, eds. <i>Production Engineering and Management</i>.
    Lemgo; 2015:207-218.'
  apa: 'Huxol, A., &#38; Villmer, F.-J. (2015). Hybrid Manufacturing Machines: Combining
    Additive and Subtractive Manufacturing Technologies. In E. Padoano, F.-J. Villmer,
    &#38; Department of Production Engineering and Management (Eds.), <i>Production
    Engineering and Management</i> (pp. 207–218). Lemgo.'
  bjps: '<b>Huxol A and Villmer F-J</b> (2015) Hybrid Manufacturing Machines: Combining
    Additive and Subtractive Manufacturing Technologies. In Padoano E, Villmer F-J
    and Department of Production Engineering and Management (eds), <i>Production Engineering
    and Management</i>. Lemgo, pp. 207–218.'
  chicago: 'Huxol, Andrea, and Franz-Josef Villmer. “Hybrid Manufacturing Machines:
    Combining Additive and Subtractive Manufacturing Technologies.” In <i>Production
    Engineering and Management</i>, edited by Elio Padoano, Franz-Josef Villmer, and
    Department of Production Engineering and Management, 207–18. Lemgo, 2015.'
  chicago-de: 'Huxol, Andrea und Franz-Josef Villmer. 2015. Hybrid Manufacturing Machines:
    Combining Additive and Subtractive Manufacturing Technologies. In: <i>Production
    Engineering and Management</i>, hg. von Elio Padoano, Franz-Josef Villmer, und
    Department of Production Engineering and Management, 207–218. Lemgo.'
  din1505-2-1: '<span style="font-variant:small-caps;">Huxol, Andrea</span> ; <span
    style="font-variant:small-caps;">Villmer, Franz-Josef</span>: Hybrid Manufacturing
    Machines: Combining Additive and Subtractive Manufacturing Technologies. In: <span
    style="font-variant:small-caps;">Padoano, E.</span> ; <span style="font-variant:small-caps;">Villmer,
    F.-J.</span> ; <span style="font-variant:small-caps;">Department of Production
    Engineering and Management</span> (Hrsg.): <i>Production Engineering and Management</i>.
    Lemgo, 2015, S. 207–218'
  havard: 'A. Huxol, F.-J. Villmer, Hybrid Manufacturing Machines: Combining Additive
    and Subtractive Manufacturing Technologies, in: E. Padoano, F.-J. Villmer, Department
    of Production Engineering and Management (Eds.), Production Engineering and Management,
    Lemgo, 2015: pp. 207–218.'
  ieee: 'A. Huxol and F.-J. Villmer, “Hybrid Manufacturing Machines: Combining Additive
    and Subtractive Manufacturing Technologies,” in <i>Production Engineering and
    Management</i>, Trieste, Italy, 2015, no. 1, pp. 207–218.'
  mla: 'Huxol, Andrea, and Franz-Josef Villmer. “Hybrid Manufacturing Machines: Combining
    Additive and Subtractive Manufacturing Technologies.” <i>Production Engineering
    and Management</i>, edited by Elio Padoano et al., no. 1, 2015, pp. 207–18.'
  short: 'A. Huxol, F.-J. Villmer, in: E. Padoano, F.-J. Villmer, Department of Production
    Engineering and Management (Eds.), Production Engineering and Management, Lemgo,
    2015, pp. 207–218.'
  ufg: '<b>Huxol, Andrea/Villmer, Franz-Josef (2015)</b>: Hybrid Manufacturing Machines:
    Combining Additive and Subtractive Manufacturing Technologies, in: Elio Padoano
    et. al. (Hgg.): <i>Production Engineering and Management</i>, Lemgo, S. 207–218.'
  van: 'Huxol A, Villmer F-J. Hybrid Manufacturing Machines: Combining Additive and
    Subtractive Manufacturing Technologies. In: Padoano E, Villmer F-J, Department
    of Production Engineering and Management, editors. Production Engineering and
    Management. Lemgo; 2015. p. 207–18.'
conference:
  end_date: 2015-10-02
  location: Trieste, Italy
  name: Proceedings5th International Conference
  start_date: 2015-10-01
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-19T07:26:35Z
date_updated: 2023-03-15T13:50:03Z
department:
- _id: DEP1306
editor:
- first_name: Elio
  full_name: Padoano, Elio
  last_name: Padoano
- first_name: Franz-Josef
  full_name: Villmer, Franz-Josef
  last_name: Villmer
issue: '1'
keyword:
- Additive manufacturing
- topology optimization
- aerospace
- life cycle costs
language:
- iso: eng
main_file_link:
- open_access: '1'
  url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf
oa: '1'
page: 207-218
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
  isbn:
  - 978-3-941645-11-0
publication_status: published
related_material:
  link:
  - relation: contains
    url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf
status: public
title: 'Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing
  Technologies'
type: conference
user_id: '45673'
year: 2015
...
---
_id: '5932'
abstract:
- lang: eng
  text: Groupage transports are frequently calculated based on freight rates assuming
    a declining rate with respect to volume and to transportation distance. This paper
    investigates the case of feeding many small shipments to customers via a freight
    forwarder network. It is argued that costs for post-carriage transport dominate
    other costs. Based on a theoretical estimate, simulation experiments for the case
    of a uniform distribution of customer locations around the subsidiary with a fixed
    shipment size per drop suggest that the aggregate costs grow progressively with
    increasing customer drop distances from the subsidiary. The resulting implications
    for transport modelling are discussed.
author:
- first_name: Nicholas
  full_name: Boone, Nicholas
  id: '24251'
  last_name: Boone
- first_name: Tim
  full_name: Quisbrock, Tim
  id: '24033'
  last_name: Quisbrock
citation:
  ama: 'Boone N, Quisbrock T. Modelling post-carriage transport costs in groupage
    networks. In: <i>Advanced Manufacturing and Sustainable Logistics : Proceedings
    / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn</i>. Berlin:
    Springer; 2011:332-344. doi:<a href="https://doi.org/doi.org/10.1007/978-3-642-12494-5_30">doi.org/10.1007/978-3-642-12494-5_30</a>'
  apa: 'Boone, N., &#38; Quisbrock, T. (2011). Modelling post-carriage transport costs
    in groupage networks. In <i>Advanced manufacturing and sustainable logistics :
    proceedings / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn</i>
    (pp. 332–344). Berlin: Springer. <a href="https://doi.org/doi.org/10.1007/978-3-642-12494-5_30">https://doi.org/doi.org/10.1007/978-3-642-12494-5_30</a>'
  bjps: '<b>Boone N and Quisbrock T</b> (2011) Modelling Post-Carriage Transport Costs
    in Groupage Networks. <i>Advanced Manufacturing and Sustainable Logistics : Proceedings
    / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn</i>. Berlin:
    Springer, pp. 332–344.'
  chicago: 'Boone, Nicholas, and Tim Quisbrock. “Modelling Post-Carriage Transport
    Costs in Groupage Networks.” In <i>Advanced Manufacturing and Sustainable Logistics :
    Proceedings / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn</i>,
    332–44. Berlin: Springer, 2011. <a href="https://doi.org/doi.org/10.1007/978-3-642-12494-5_30">https://doi.org/doi.org/10.1007/978-3-642-12494-5_30</a>.'
  chicago-de: 'Boone, Nicholas und Tim Quisbrock. 2011. Modelling post-carriage transport
    costs in groupage networks. In: <i>Advanced manufacturing and sustainable logistics :
    proceedings / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn</i>,
    332–344. Berlin: Springer. doi:<a href="https://doi.org/doi.org/10.1007/978-3-642-12494-5_30,">doi.org/10.1007/978-3-642-12494-5_30,</a>
    .'
  din1505-2-1: '<span style="font-variant:small-caps;">Boone, Nicholas</span> ; <span
    style="font-variant:small-caps;">Quisbrock, Tim</span>: Modelling post-carriage
    transport costs in groupage networks. In: <i>Advanced manufacturing and sustainable
    logistics : proceedings / 8th International Heinz Nixdorf Symposium, IHNS 2010,
    Paderborn</i>. Berlin : Springer, 2011, S. 332–344'
  havard: 'N. Boone, T. Quisbrock, Modelling post-carriage transport costs in groupage
    networks, in: Advanced Manufacturing and Sustainable Logistics : Proceedings /
    8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn, Springer, Berlin,
    2011: pp. 332–344.'
  ieee: 'N. Boone and T. Quisbrock, “Modelling post-carriage transport costs in groupage
    networks,” in <i>Advanced manufacturing and sustainable logistics : proceedings
    / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn</i>, Berlin:
    Springer, 2011, pp. 332–344.'
  mla: 'Boone, Nicholas, and Tim Quisbrock. “Modelling Post-Carriage Transport Costs
    in Groupage Networks.” <i>Advanced Manufacturing and Sustainable Logistics : Proceedings
    / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn</i>, Springer,
    2011, pp. 332–44, doi:<a href="https://doi.org/doi.org/10.1007/978-3-642-12494-5_30">doi.org/10.1007/978-3-642-12494-5_30</a>.'
  short: 'N. Boone, T. Quisbrock, in: Advanced Manufacturing and Sustainable Logistics :
    Proceedings / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn,
    Springer, Berlin, 2011, pp. 332–344.'
  ufg: '<b>Boone, Nicholas/Quisbrock, Tim (2011)</b>: Modelling post-carriage transport
    costs in groupage networks, in: <i>Advanced manufacturing and sustainable logistics :
    proceedings / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn</i>,
    Berlin, S. 332–344.'
  van: 'Boone N, Quisbrock T. Modelling post-carriage transport costs in groupage
    networks. In: Advanced manufacturing and sustainable logistics : proceedings /
    8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn. Berlin: Springer;
    2011. p. 332–44.'
conference:
  end_date: 2010-04-22
  location: Paderborn
  name: 8th International Heinz Nixdorf Symposium, IHNS 2010
  start_date: 2010-04-21
date_created: 2021-05-19T07:26:49Z
date_updated: 2023-03-15T13:50:03Z
department:
- _id: DEP1520
doi: doi.org/10.1007/978-3-642-12494-5_30
keyword:
- cost-by-cause principle
- freight forwarder
- freight rates
- network
- overhead costs
- pricing
- simulation
- transport
language:
- iso: eng
page: 332-344
place: Berlin
publication: 'Advanced manufacturing and sustainable logistics : proceedings / 8th
  International Heinz Nixdorf Symposium, IHNS 2010, Paderborn'
publication_identifier:
  eisbn:
  - 978-3-642-12494-5
  isbn:
  - 978-3-642-12461-7
publication_status: published
publisher: Springer
status: public
title: Modelling post-carriage transport costs in groupage networks
type: book_chapter
user_id: '15514'
year: 2011
...