[{"publication_status":"published","issue":"4","abstract":[{"lang":"ger","text":"Die Komplexität in der manuellen Montage steigt. In der sog. Mehrprodukt- oder Variantenmontage hat der Beschäftigte permanent zwischen verschiedenen Alternativen auszuwählen. Dies betrifft z.B. zu montierende Teile, Werkzeuge, Fügeverfahren oder Hilfsmittel, die in ganz unterschiedlichen Kombinationen zu verwenden sind. Der Montageprozess wird dadurch aus Sicht des Beschäftigten zu einem kontinuierlichen Auswahlprozess. Dieser stellt zunehmend höhere informatorische und kognitive Anforderungen und steigert die mentale Beanspruchung. Dies hat negative Auswirkungen auf die Arbeitsproduktivität. Informatorische Assistenzsysteme gelten als geeignete Instrumente, moderierenden Einfluss auf diese Entwicklung zu nehmen. Entscheidende Stellgrößen dabei betreffen Fragen, wie komplex die Anforderungen und wie ausgeprägt die subjektiven Ressourcen sowie die mentalen Beanspruchungen sind. Aus diesen Überlegungen werden Empfehlungen zur Gestaltung von informatorischen Assistenzsystemen abgeleitet."},{"text":"Manual assembly increases in complexity. In the so-called multi-product- or mixed-model-assembly, the employee has to constantly make choices between different alternatives. This concerns e. g. parts to be assembled, tools, fixing methods or materials that can be processed in very different combinations. From the perspective of a worker the assembly process becomes a continuous choice process, setting increasingly higher informational and cognitive demands and increasing mental strain. This has a negative impact on labor productivity. Information Assistance Systems are considered appropriate tools to take moderating influence on this development. However, it should be considered how complex demands are as well as how pronounced subjective resources and mental strain are. Based on these considerations, recommendations for the design of information assistance systems are derived.\r\n\r\nPractical Relevance: Manufacturing industry faces the demanding task of producing more and more product variants even in manual assembly. As a result, assembly workers have to process more information and are therefore exposed to greater stress. In order to avoid the resulting loss of labor productivity, assembly systems are increasingly integrating informational assistance systems that, on the one hand, support cognitive processing and, on the other hand, reduce stress. Various design recommendations are given for such informational assistance systems.","lang":"eng"}],"department":[{"_id":"DEP7020"},{"_id":"DEP1305"}],"quality_controlled":"1","publisher":"Springer","type":"journal_article","intvolume":" 72","user_id":"49010","doi":"https://doi.org/10.1007/s41449-018-0123-x","_id":"222","place":"Berlin Heidelberg","title":"Informatorische Assistenzsysteme in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung?","volume":72,"citation":{"ama":"Bornewasser M, Hinrichsen S, Bläsing D. Informatorische Assistenzsysteme in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung? Zeitschrift für Arbeitswissenschaft. 2018;72(4):264-275. doi:https://doi.org/10.1007/s41449-018-0123-x","ieee":"M. Bornewasser, S. Hinrichsen, and D. Bläsing, “Informatorische Assistenzsysteme in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung?,” Zeitschrift für Arbeitswissenschaft, vol. 72, no. 4, pp. 264–275, 2018.","van":"Bornewasser M, Hinrichsen S, Bläsing D. Informatorische Assistenzsysteme in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung? Zeitschrift für Arbeitswissenschaft. 2018;72(4):264–75.","ufg":"Bornewasser, Manfred et. al. (2018): Informatorische Assistenzsysteme in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung?, in: Zeitschrift für Arbeitswissenschaft 72 (4), S. 264–275.","bjps":"Bornewasser M, Hinrichsen S and Bläsing D (2018) Informatorische Assistenzsysteme in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung? Zeitschrift für Arbeitswissenschaft 72, 264–275.","mla":"Bornewasser, Manfred, et al. “Informatorische Assistenzsysteme in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung?” Zeitschrift für Arbeitswissenschaft, vol. 72, no. 4, Springer, 2018, pp. 264–75, doi:https://doi.org/10.1007/s41449-018-0123-x.","havard":"M. Bornewasser, S. Hinrichsen, D. Bläsing, Informatorische Assistenzsysteme in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung?, Zeitschrift für Arbeitswissenschaft. 72 (2018) 264–275.","apa":"Bornewasser, M., Hinrichsen, S., & Bläsing, D. (2018). Informatorische Assistenzsysteme in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung? Zeitschrift für Arbeitswissenschaft, 72(4), 264–275. https://doi.org/10.1007/s41449-018-0123-x","chicago":"Bornewasser, Manfred, Sven Hinrichsen, and Dominic Bläsing. “Informatorische Assistenzsysteme in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung?” Zeitschrift für Arbeitswissenschaft 72, no. 4 (2018): 264–75. https://doi.org/10.1007/s41449-018-0123-x.","short":"M. Bornewasser, S. Hinrichsen, D. Bläsing, Zeitschrift für Arbeitswissenschaft 72 (2018) 264–275.","chicago-de":"Bornewasser, Manfred, Sven Hinrichsen und Dominic Bläsing. 2018. Informatorische Assistenzsysteme in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung? Zeitschrift für Arbeitswissenschaft 72, Nr. 4: 264–275. doi:https://doi.org/10.1007/s41449-018-0123-x, .","din1505-2-1":"Bornewasser, Manfred ; Hinrichsen, Sven ; Bläsing, Dominic: Informatorische Assistenzsysteme in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung? In: Zeitschrift für Arbeitswissenschaft Bd. 72. Berlin Heidelberg, Springer (2018), Nr. 4, S. 264–275"},"author":[{"last_name":"Bornewasser","full_name":"Bornewasser, Manfred","first_name":"Manfred"},{"last_name":"Hinrichsen","full_name":"Hinrichsen, Sven","id":"49010","first_name":"Sven"},{"last_name":"Bläsing","full_name":"Bläsing, Dominic","first_name":"Dominic"}],"year":2018,"main_file_link":[{"url":"https://link.springer.com/article/10.1007%2Fs41449-018-0123-x#Abs2"}],"page":"264-275","status":"public","project":[{"_id":"FBB6D104-44D9-11E9-AA25-B54CDB794CE1","name":"Montexas 4.0"}],"date_created":"2018-11-06T13:25:05Z","publication_identifier":{"issn":["0340-2444"]},"publication":"Zeitschrift für Arbeitswissenschaft","related_material":{"link":[{"url":"https://link.springer.com/article/10.1007%2Fs41449-018-0123-x#Abs2","relation":"contains"}]},"date_updated":"2023-03-15T13:49:39Z","language":[{"iso":"ger"}],"keyword":["Complexity","Mental workload","Objective measurement","Informational assistance systems","Cognitive ergonomics"]},{"title":"A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance","file":[{"access_level":"open_access","success":1,"file_id":"2373","file_size":574858,"content_type":"application/pdf","file_name":"1805.01236v1.pdf","date_created":"2020-05-18T15:08:45Z","creator":"zph-yh1","relation":"main_file","date_updated":"2020-05-18T15:08:45Z"}],"publication_status":"published","citation":{"chicago":"Fliedner, Niels Hendrik, Dimitri Block, and Uwe Meier. “A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance.” ArXiv:1805.01236, 2018.","apa":"Fliedner, N. H., Block, D., & Meier, U. (2018). A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance. ArXiv:1805.01236.","havard":"N.H. Fliedner, D. Block, U. Meier, A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance, ArXiv:1805.01236. (2018).","mla":"Fliedner, Niels Hendrik, et al. “A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance.” ArXiv:1805.01236, 2018.","bjps":"Fliedner NH, Block D and Meier U (2018) A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance. arXiv:1805.01236.","ufg":"Fliedner, Niels Hendrik et. al. (2018): A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance.","van":"Fliedner NH, Block D, Meier U. A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance. arXiv:1805.01236. 2018.","chicago-de":"Fliedner, Niels Hendrik, Dimitri Block und Uwe Meier. 2018. A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance. arXiv:1805.01236.","din1505-2-1":"Fliedner, Niels Hendrik ; Block, Dimitri ; Meier, Uwe: A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance. In: arXiv:1805.01236 (2018)","short":"N.H. Fliedner, D. Block, U. Meier, ArXiv:1805.01236 (2018).","ieee":"N. H. Fliedner, D. Block, and U. Meier, “A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance,” arXiv:1805.01236. 2018.","ama":"Fliedner NH, Block D, Meier U. A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance. arXiv:180501236. 2018."},"abstract":[{"text":"Novel industrial wireless applications require wideband, real-time channel\r\ncharacterization due to complex multipath propagation. Rapid machine motion\r\nleads to fast time variance of the channel's reflective behavior, which must be\r\ncaptured for radio channel characterization. Additionally, inhomogeneous radio\r\nchannels demand highly flexible measurements. Existing approaches for radio\r\nchannel measurements either lack flexibility or wide-band, real-time\r\nperformance with fast time variance. In this paper, we propose a correlative\r\nchannel sounding approach utilizing a software-defined architecture. The\r\napproach enables real-time, wide-band measurements with fast time variance\r\nimmune to active interference. The desired performance is validated with a\r\ndemanding industrial application example.","lang":"eng"}],"main_file_link":[{"open_access":"1","url":"https://arxiv.org/abs/1805.01236"}],"ddc":["620"],"year":2018,"author":[{"first_name":"Niels Hendrik","last_name":"Fliedner","full_name":"Fliedner, Niels Hendrik"},{"last_name":"Block","full_name":"Block, Dimitri","first_name":"Dimitri"},{"full_name":"Meier, Uwe","first_name":"Uwe","last_name":"Meier"}],"page":"6","status":"public","date_created":"2020-05-18T15:07:56Z","type":"preprint","publication":"arXiv:1805.01236","file_date_updated":"2020-05-18T15:08:45Z","date_updated":"2023-03-15T13:49:39Z","user_id":"57956","has_accepted_license":"1","oa":"1","_id":"2372","language":[{"iso":"eng"}],"keyword":["Correlation","Wireless communication","Real-time systems","Logic gates","Frequency measurement","Libraries","Time measurement"]},{"status":"public","quality_controlled":"1","department":[{"_id":"DEP5000"}],"conference":{"location":"Lisbon, Portugal","name":"2018 15th International Symposium on Wireless Communication Systems (ISWCS)","end_date":"2018-08-31","start_date":"2018-08-28"},"year":2018,"author":[{"full_name":"Fliedner, Niels Hendrik","last_name":"Fliedner","first_name":"Niels Hendrik"},{"first_name":"Dimitri","full_name":"Block, Dimitri","last_name":"Block"},{"full_name":"Meier, Uwe","last_name":"Meier","first_name":"Uwe"}],"main_file_link":[{"url":"https://ieeexplore.ieee.org/document/8491207"}],"abstract":[{"lang":"eng","text":"Novel industrial wireless applications require wideband, real-time channel characterization due to complex multipath propagation. Rapid machine motion leads to fast time variance of the channel's reflective behavior, which must be captured for radio channel characterization. Additionally, inhomogeneous radio channels demand highly flexible measurements. Existing approaches for radio channel measurements either lack flexibility or wide-band, real-time performance with fast time variance. In this paper, we propose a correlative channel sounding approach utilizing a software-defined architecture. The approach enables wide-band measurements with fast time variance immune to active interference. Furthermore, its real-time capability allows live processing on demand. The desired performance is validated with a demanding industrial application example."}],"publication_status":"published","citation":{"din1505-2-1":"Fliedner, Niels Hendrik ; Block, Dimitri ; Meier, Uwe: A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance. In: 2018 15th International Symposium on Wireless Communication Systems (ISWCS), 2018","chicago-de":"Fliedner, Niels Hendrik, Dimitri Block und Uwe Meier. 2018. A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance. In: 2018 15th International Symposium on Wireless Communication Systems (ISWCS). doi:10.1109/iswcs.2018.8491207, .","short":"N.H. Fliedner, D. Block, U. Meier, in: 2018 15th International Symposium on Wireless Communication Systems (ISWCS), 2018.","chicago":"Fliedner, Niels Hendrik, Dimitri Block, and Uwe Meier. “A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance.” In 2018 15th International Symposium on Wireless Communication Systems (ISWCS), 2018. https://doi.org/10.1109/iswcs.2018.8491207.","apa":"Fliedner, N. H., Block, D., & Meier, U. (2018). A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance. In 2018 15th International Symposium on Wireless Communication Systems (ISWCS). Lisbon, Portugal. https://doi.org/10.1109/iswcs.2018.8491207","ufg":"Fliedner, Niels Hendrik et. al. (2018): A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance, in: 2018 15th International Symposium on Wireless Communication Systems (ISWCS).","bjps":"Fliedner NH, Block D and Meier U (2018) A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance. 2018 15th International Symposium on Wireless Communication Systems (ISWCS).","mla":"Fliedner, Niels Hendrik, et al. “A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance.” 2018 15th International Symposium on Wireless Communication Systems (ISWCS), 2018, doi:10.1109/iswcs.2018.8491207.","havard":"N.H. Fliedner, D. Block, U. Meier, A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance, in: 2018 15th International Symposium on Wireless Communication Systems (ISWCS), 2018.","van":"Fliedner NH, Block D, Meier U. A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance. In: 2018 15th International Symposium on Wireless Communication Systems (ISWCS). 2018.","ieee":"N. H. Fliedner, D. Block, and U. Meier, “A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance,” in 2018 15th International Symposium on Wireless Communication Systems (ISWCS), Lisbon, Portugal, 2018.","ama":"Fliedner NH, Block D, Meier U. A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance. In: 2018 15th International Symposium on Wireless Communication Systems (ISWCS). ; 2018. doi:10.1109/iswcs.2018.8491207"},"title":"A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance","language":[{"iso":"eng"}],"keyword":["Correlation","Wireless communication","Real-time systems","Logic gates","Frequency measurement","Libraries","Time measurement"],"doi":"10.1109/iswcs.2018.8491207","_id":"2374","date_updated":"2023-03-15T13:49:39Z","user_id":"57956","type":"conference","date_created":"2020-05-18T15:14:53Z","publication":"2018 15th International Symposium on Wireless Communication Systems (ISWCS)","publication_identifier":{"isbn":["9781538650059"]}},{"_id":"2376","doi":"10.1109/etfa.2018.8502494","keyword":["Spatial diversity","Antenna measurements","Real-time systems","Frequency measurement","Couplings","Antennas"],"language":[{"iso":"eng"}],"user_id":"57956","date_updated":"2023-03-15T13:49:39Z","publication_identifier":{"isbn":["9781538671085"]},"publication":"2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA)","date_created":"2020-05-18T15:24:02Z","type":"conference","publisher":"IEEE","quality_controlled":"1","status":"public","abstract":[{"text":"Wireless industrial environments are dominated by multipath propagation and interference. In order to handle spatial diversity, a possible approach is dividing the physical area into many small cells. The spatial diversity is turned into FDMA by utilizing different frequency bands for neighboring cells. A challenging use case with fast vehicles traveling over long distances in a short time is the packaging industry. It would require many fast handoffs for each vehicle. Thus, a small cell FDMA approach is not appropriate. Conversely, employing radiating lines eliminates FDMA-based handoff issues, and reduces multipath delay spread and signal attenuation compared to centralized approaches. Additionally, radiating lines perform well in high-speed, low-power and long-range environments. In this paper, we realize a novel radiating-line-based, high-reliable, real-time transmission system with near-field coupling. This wireless transmission method results in a frequency-flat, time-invariant radio channel for the given requirements. Employing antenna diversity results in significant improvements in the system's performance compared to single antenna solutions.","lang":"eng"}],"author":[{"full_name":"Fliedner, Niels Hendrik","first_name":"Niels Hendrik","last_name":"Fliedner"},{"full_name":"Meier, Uwe","first_name":"Uwe","last_name":"Meier"},{"first_name":"Thomas","full_name":"Neugebauer, Thomas","last_name":"Neugebauer"}],"main_file_link":[{"url":"https://ieeexplore.ieee.org/document/8502494"}],"year":2018,"conference":{"end_date":"2018-09-07","start_date":"2018-09-04","name":"2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA)","location":" Turin, Italy"},"department":[{"_id":"DEP5000"}],"citation":{"ieee":"N. H. Fliedner, U. Meier, and T. Neugebauer, “Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling,” in 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA), Turin, Italy, 2018.","ama":"Fliedner NH, Meier U, Neugebauer T. Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling. In: 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA). IEEE; 2018. doi:10.1109/etfa.2018.8502494","chicago":"Fliedner, Niels Hendrik, Uwe Meier, and Thomas Neugebauer. “Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling.” In 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA). IEEE, 2018. https://doi.org/10.1109/etfa.2018.8502494.","apa":"Fliedner, N. H., Meier, U., & Neugebauer, T. (2018). Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling. In 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA). Turin, Italy: IEEE. https://doi.org/10.1109/etfa.2018.8502494","havard":"N.H. Fliedner, U. Meier, T. Neugebauer, Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling, in: 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA), IEEE, 2018.","bjps":"Fliedner NH, Meier U and Neugebauer T (2018) Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling. 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA). IEEE.","mla":"Fliedner, Niels Hendrik, et al. “Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling.” 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA), IEEE, 2018, doi:10.1109/etfa.2018.8502494.","ufg":"Fliedner, Niels Hendrik et. al. (2018): Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling, in: 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA).","van":"Fliedner NH, Meier U, Neugebauer T. Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling. In: 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA). IEEE; 2018.","din1505-2-1":"Fliedner, Niels Hendrik ; Meier, Uwe ; Neugebauer, Thomas: Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling. In: 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA) : IEEE, 2018","chicago-de":"Fliedner, Niels Hendrik, Uwe Meier und Thomas Neugebauer. 2018. Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling. In: 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA). IEEE. doi:10.1109/etfa.2018.8502494, .","short":"N.H. Fliedner, U. Meier, T. Neugebauer, in: 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA), IEEE, 2018."},"publication_status":"published","title":"Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling"},{"date_updated":"2023-03-15T13:49:51Z","publication_identifier":{"issn":["2227-7080"]},"publication":"Technologies : open access journal ","date_created":"2021-01-08T08:26:15Z","keyword":["digitization","change management","scenarios of digitized work","product engineering","sociotechnical systems"],"language":[{"iso":"eng"}],"oa":"1","volume":6,"citation":{"ieee":"L. Miekus et al., “Development of a Change Management Instrument for the Implementation of Technologies,” Technologies : open access journal , vol. 6, no. 120, 2018.","ama":"Miekus L, Bentler D, Jenderny S, et al. Development of a Change Management Instrument for the Implementation of Technologies. Technologies : open access journal . 2018;6(120). doi:10.3390/technologies6040120","short":"L. Miekus, D. Bentler, S. Jenderny, M. Foullois, L. Wöste, C. Röcker, G.W. Maier, Technologies : Open Access Journal 6 (2018).","din1505-2-1":"Miekus, Lisa ; Bentler, Dominik ; Jenderny, Sascha ; Foullois, Marc ; Wöste, Lars ; Röcker, Carsten ; Maier, Günter W.: Development of a Change Management Instrument for the Implementation of Technologies. In: Technologies : open access journal Bd. 6. Basel, MDPI (2018), Nr. 120","chicago-de":"Miekus, Lisa, Dominik Bentler, Sascha Jenderny, Marc Foullois, Lars Wöste, Carsten Röcker und Günter W. Maier. 2018. Development of a Change Management Instrument for the Implementation of Technologies. Technologies : open access journal 6, Nr. 120. doi:10.3390/technologies6040120, .","apa":"Miekus, L., Bentler, D., Jenderny, S., Foullois, M., Wöste, L., Röcker, C., & Maier, G. W. (2018). Development of a Change Management Instrument for the Implementation of Technologies. Technologies : Open Access Journal , 6(120). https://doi.org/10.3390/technologies6040120","chicago":"Miekus, Lisa, Dominik Bentler, Sascha Jenderny, Marc Foullois, Lars Wöste, Carsten Röcker, and Günter W. Maier. “Development of a Change Management Instrument for the Implementation of Technologies.” Technologies : Open Access Journal 6, no. 120 (2018). https://doi.org/10.3390/technologies6040120.","van":"Miekus L, Bentler D, Jenderny S, Foullois M, Wöste L, Röcker C, et al. Development of a Change Management Instrument for the Implementation of Technologies. Technologies : open access journal . 2018;6(120).","mla":"Miekus, Lisa, et al. “Development of a Change Management Instrument for the Implementation of Technologies.” Technologies : Open Access Journal , vol. 6, no. 120, MDPI , 2018, doi:10.3390/technologies6040120.","havard":"L. Miekus, D. Bentler, S. Jenderny, M. Foullois, L. Wöste, C. Röcker, G.W. Maier, Development of a Change Management Instrument for the Implementation of Technologies, Technologies : Open Access Journal . 6 (2018).","bjps":"Miekus L et al. (2018) Development of a Change Management Instrument for the Implementation of Technologies. Technologies : open access journal 6.","ufg":"Miekus, Lisa et. al. (2018): Development of a Change Management Instrument for the Implementation of Technologies, in: Technologies : open access journal 6 (120)."},"title":"Development of a Change Management Instrument for the Implementation of Technologies","status":"public","author":[{"first_name":"Lisa","full_name":"Miekus, Lisa","last_name":"Miekus"},{"first_name":"Dominik","full_name":"Bentler, Dominik","last_name":"Bentler"},{"first_name":"Sascha","full_name":"Jenderny, Sascha","last_name":"Jenderny"},{"first_name":"Marc","last_name":"Foullois","full_name":"Foullois, Marc"},{"full_name":"Wöste, Lars","last_name":"Wöste","first_name":"Lars"},{"full_name":"Röcker, Carsten","last_name":"Röcker","id":"61525","first_name":"Carsten"},{"first_name":"Günter W.","full_name":"Maier, Günter W.","last_name":"Maier"}],"main_file_link":[{"open_access":"1"}],"year":2018,"intvolume":" 6","user_id":"15514","type":"journal_article","_id":"4316","doi":"10.3390/technologies6040120","place":"Basel","publication_status":"published","publisher":"MDPI ","abstract":[{"lang":"eng","text":"The manufacturing industry is increasingly being dominated by information and communication technology, leading to the development of cyber-physical systems. Most existing frameworks on the assessment of such technological advancements see the technology as a solitary system. However, research has shown that other environmental factors like organizational processes or human factors are also affected. Drawing on the sociotechnical systems approach, future technologies could be evaluated using scenarios of digitized work. These scenarios can help classify new technologies and uncover their advantages and constraints in order to provide guidance for the digital development of organizations. We developed an instrument for evaluating scenarios of digitized work on the relevant dimensions ‘technology’, ‘human’ and ‘organization’ and conducted a quantitative study applying this instrument on three different scenarios (N = 24 subject matter experts). Results show that our instrument is capable of measuring technological, human and organizational aspects of technology implementations and detecting differences in the scenarios under investigation. The instrument’s practical value is significant as it enables the user to compare and quantify scenarios and helps companies to decide which technology they should implement."}],"issue":"120","department":[{"_id":"DEP5023"}]},{"editor":[{"last_name":"Holzinger","first_name":"Andreas","full_name":"Holzinger, Andreas"},{"first_name":"Peter","full_name":"Kieseberg, Peter","last_name":"Kieseberg"},{"last_name":"Tjoa","full_name":"Tjoa, A Min","first_name":"A Min"},{"last_name":"Weippl","full_name":"Weippl, Edgar","first_name":"Edgar"}],"date_updated":"2023-03-15T13:49:52Z","publication_identifier":{"eisbn":["978-1-4503-6390-7"],"isbn":["978-3-319-99739-1"]},"publication":"Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018","date_created":"2021-01-08T08:26:18Z","keyword":["Human-machine-interaction","Multimodal feedback","Assistive systems","Augmented-reality","Smart factory"],"language":[{"iso":"eng"}],"oa":"1","volume":11015,"citation":{"chicago-de":"Heinz, Mario, Hitesh Dhiman und Carsten Röcker. 2018. A Multi-Device Assistive System for Industrial Maintenance Operations. In: Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, hg. von Andreas Holzinger, Peter Kieseberg, A Min Tjoa, und Edgar Weippl, 11015:239–247. Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI. Cham: Springer. doi:10.1007/978-3-319-99740-7_16, .","din1505-2-1":"Heinz, Mario ; Dhiman, Hitesh ; Röcker, Carsten: A Multi-Device Assistive System for Industrial Maintenance Operations. In: Holzinger, A. ; Kieseberg, P. ; Tjoa, A. M. ; Weippl, E. (Hrsg.): Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI. Bd. 11015. Cham : Springer, 2018, S. 239–247","short":"M. Heinz, H. Dhiman, C. Röcker, in: A. Holzinger, P. Kieseberg, A.M. Tjoa, E. Weippl (Eds.), Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, Springer, Cham, 2018, pp. 239–247.","chicago":"Heinz, Mario, Hitesh Dhiman, and Carsten Röcker. “A Multi-Device Assistive System for Industrial Maintenance Operations.” In Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, edited by Andreas Holzinger, Peter Kieseberg, A Min Tjoa, and Edgar Weippl, 11015:239–47. Lecture Notes in Computer Science / Information Systems and Applications, Incl. Internet/Web, and HCI. Cham: Springer, 2018. https://doi.org/10.1007/978-3-319-99740-7_16.","apa":"Heinz, M., Dhiman, H., & Röcker, C. (2018). A Multi-Device Assistive System for Industrial Maintenance Operations. In A. Holzinger, P. Kieseberg, A. M. Tjoa, & E. Weippl (Eds.), Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018 (Vol. 11015, pp. 239–247). Cham: Springer. https://doi.org/10.1007/978-3-319-99740-7_16","ufg":"Heinz, Mario et. al. (2018): A Multi-Device Assistive System for Industrial Maintenance Operations, in: Andreas Holzinger et. al. (Hgg.): Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018 (=Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI 11015), Cham, S. 239–247.","bjps":"Heinz M, Dhiman H and Röcker C (2018) A Multi-Device Assistive System for Industrial Maintenance Operations. In Holzinger A et al. (eds), Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, vol. 11015. Cham: Springer, pp. 239–247.","mla":"Heinz, Mario, et al. “A Multi-Device Assistive System for Industrial Maintenance Operations.” Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, edited by Andreas Holzinger et al., vol. 11015, Springer, 2018, pp. 239–47, doi:10.1007/978-3-319-99740-7_16.","havard":"M. Heinz, H. Dhiman, C. Röcker, A Multi-Device Assistive System for Industrial Maintenance Operations, in: A. Holzinger, P. Kieseberg, A.M. Tjoa, E. Weippl (Eds.), Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, Springer, Cham, 2018: pp. 239–247.","van":"Heinz M, Dhiman H, Röcker C. A Multi-Device Assistive System for Industrial Maintenance Operations. In: Holzinger A, Kieseberg P, Tjoa AM, Weippl E, editors. Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 84, 89, TC 12/WG 129 International Cross-Domain Conference, CD-MAKE 2018. Cham: Springer; 2018. p. 239–47. (Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI; vol. 11015).","ieee":"M. Heinz, H. Dhiman, and C. Röcker, “A Multi-Device Assistive System for Industrial Maintenance Operations,” in Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, Hamburg, 2018, vol. 11015, pp. 239–247.","ama":"Heinz M, Dhiman H, Röcker C. A Multi-Device Assistive System for Industrial Maintenance Operations. In: Holzinger A, Kieseberg P, Tjoa AM, Weippl E, eds. Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018. Vol 11015. Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI. Cham: Springer; 2018:239-247. doi:10.1007/978-3-319-99740-7_16"},"title":"A Multi-Device Assistive System for Industrial Maintenance Operations","status":"public","page":"239 - 247","main_file_link":[{"open_access":"1"}],"author":[{"first_name":"Mario","full_name":"Heinz, Mario","id":"68913","last_name":"Heinz"},{"last_name":"Dhiman","first_name":"Hitesh","id":"71767","full_name":"Dhiman, Hitesh"},{"last_name":"Röcker","first_name":"Carsten","id":"61525","full_name":"Röcker, Carsten"}],"year":2018,"intvolume":" 11015","user_id":"15514","type":"conference","_id":"4318","doi":"10.1007/978-3-319-99740-7_16","place":"Cham","publication_status":"published","series_title":"Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI","publisher":"Springer","abstract":[{"lang":"eng","text":"Recent advances in the field of industrial digitization and automation lead to an increasing need for assistance systems to support workers in various fields of activity, such as assembly, logistics and maintenance. Current assistance systems for the maintenance area are usually based on a single visualization technology. However, in our view, this is not practicable in terms of real activities, as these operations involve various subtasks for which different interaction concepts would be advantageous. Therefore, in this paper, we propose a concept for a multi-device assistive system, which combines multiple devices to provide workers with relevant information over different subtasks of a maintenance operation and present our first prototype for such a system."}],"department":[{"_id":"DEP5023"}],"conference":{"name":"International Cross-Domain Conference, CD-MAKE 2018","location":"Hamburg","start_date":"2018-08-27","end_date":"2018-08-30"}},{"date_updated":"2023-03-15T13:49:52Z","editor":[{"full_name":"Holzinger, Andreas","first_name":"Andreas","last_name":"Holzinger"},{"first_name":"Peter","last_name":" Kieseberg","full_name":" Kieseberg, Peter"},{"first_name":"A Min","last_name":"Tjoa","full_name":"Tjoa, A Min"},{"last_name":"Weippl","first_name":"Edgar","full_name":"Weippl, Edgar"}],"date_created":"2021-01-08T08:26:26Z","publication":"Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018","publication_identifier":{"isbn":["978-3-319-99739-1"],"eisbn":["978-3-319-99740-7"]},"language":[{"iso":"eng"}],"keyword":["Human-machine-interaction","Multimodal feedback","Assistive systems","Augmented-reality","Smart factory"],"oa":"1","citation":{"short":"M. Heinz, C. Röcker, in: A. Holzinger, P. Kieseberg, A.M. Tjoa, E. Weippl (Eds.), Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, Springer, Cham, 2018.","chicago-de":"Heinz, Mario und Carsten Röcker. 2018. Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities. In: Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, hg. von Andreas Holzinger, Peter Kieseberg, A Min Tjoa, und Edgar Weippl, 11015:. Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI. Cham: Springer. doi:10.1007/978-3-319-99740-7_17, .","din1505-2-1":"Heinz, Mario ; Röcker, Carsten: Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities. In: Holzinger, A. ; Kieseberg, P. ; Tjoa, A. M. ; Weippl, E. (Hrsg.): Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI. Bd. 11015. Cham : Springer, 2018","apa":"Heinz, M., & Röcker, C. (2018). Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities. In A. Holzinger, P. Kieseberg, A. M. Tjoa, & E. Weippl (Eds.), Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018 (Vol. 11015). Cham: Springer. https://doi.org/10.1007/978-3-319-99740-7_17","chicago":"Heinz, Mario, and Carsten Röcker. “Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities.” In Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, edited by Andreas Holzinger, Peter Kieseberg, A Min Tjoa, and Edgar Weippl, Vol. 11015. Lecture Notes in Computer Science / Information Systems and Applications, Incl. Internet/Web, and HCI. Cham: Springer, 2018. https://doi.org/10.1007/978-3-319-99740-7_17.","van":"Heinz M, Röcker C. Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities. In: Holzinger A, Kieseberg P, Tjoa AM, Weippl E, editors. Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 84, 89, TC 12/WG 129 International Cross-Domain Conference, CD-MAKE 2018. Cham: Springer; 2018. (Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI; vol. 11015).","ufg":"Heinz, Mario/Röcker, Carsten (2018): Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities, in: Andreas Holzinger et. al. (Hgg.): Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018 (=Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI 11015), Cham.","bjps":"Heinz M and Röcker C (2018) Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities. In Holzinger A et al. (eds), Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, vol. 11015. Cham: Springer.","havard":"M. Heinz, C. Röcker, Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities, in: A. Holzinger, P. Kieseberg, A.M. Tjoa, E. Weippl (Eds.), Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, Springer, Cham, 2018.","mla":"Heinz, Mario, and Carsten Röcker. “Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities.” Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, edited by Andreas Holzinger et al., vol. 11015, Springer, 2018, doi:10.1007/978-3-319-99740-7_17.","ieee":"M. Heinz and C. Röcker, “Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities,” in Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, Hamburg, 2018, vol. 11015.","ama":"Heinz M, Röcker C. Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities. In: Holzinger A, Kieseberg P, Tjoa AM, Weippl E, eds. Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018. Vol 11015. Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI. Cham: Springer; 2018. doi:10.1007/978-3-319-99740-7_17"},"volume":11015,"title":"Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities","status":"public","author":[{"id":"68913","full_name":"Heinz, Mario","first_name":"Mario","last_name":"Heinz"},{"first_name":"Carsten","full_name":"Röcker, Carsten","last_name":"Röcker","id":"61525"}],"year":2018,"main_file_link":[{"open_access":"1"}],"user_id":"15514","intvolume":" 11015","type":"conference","place":"Cham","doi":"10.1007/978-3-319-99740-7_17","_id":"4324","publication_status":"published","series_title":"Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI","publisher":"Springer","conference":{"start_date":"2018-08-27","end_date":"2018-08-30","name":" International Cross-Domain Conference, CD-MAKE 2018","location":"Hamburg"},"department":[{"_id":"DEP5023"}],"abstract":[{"text":"On the long term, the current wave of digitization and automation in the industrial environment will result in a progressively higher complexity and heterogeneity in the industrial environment. In this context, a growing need arises for the development of digital assistance systems to support workers in various fields of activities. Current systems are generally limited to visualizations and visual feedback. Therefore, in the scope of this paper, we take a look at the major challenges and opportunities for the integration of multimodal feedback systems in today’s and future industrial environments. It shows that the integration of multimodal feedback is subject to a complex combination of technical, user-cenric and legal aspects.","lang":"eng"}]},{"publisher":"Elsevier BV","abstract":[{"text":"The digitization of the industry requires smart products and services. Smart products are mechatronic products with an increasing amount of software. To get high quality smart products to the market quickly, manufacturers need to reshape their product lifecycle processes. They need to apply system engineering-based methods to enable smooth cross-domain developments with a special focus on the software domain. One significant challenge faced by manufacturers is the harmonization of product lifecycle management (PLM), which addresses the hardware lifecycle, with application lifecycle management (ALM), which addresses the software lifecycle.\r\n\r\nTo support manufacturers in this challenging activity, this paper demonstrates a proven process for developing use cases and requirements associated with a PLM/ALM integration. This process has been elicited during an industrial case study in a manufacturing company. This paper explains this process in detail. A generally applicable approach for developing the requirements of a PLM/ALM integration is extracted by removing the company-specific factors. ","lang":"eng"}],"conference":{"end_date":"20218-06-20","start_date":"2018-06-19","name":"4th International Conference on System-Integrated Intelligence - Intelligent, Flexible and Connected Systems in Products and Production","location":"Hannover"},"department":[{"_id":"DEP7022"},{"_id":"DEP1306"}],"publication_status":"published","series_title":"Procedia Manufacturing","_id":"12798","doi":"10.1016/j.promfg.2018.06.020","place":"Amsterdam [u.a.]","intvolume":" 24","user_id":"83781","type":"conference_editor_article","status":"public","page":"107-113","year":"2018","author":[{"orcid":"0000-0002-6529-6215","first_name":"Andreas","last_name":"Deuter","full_name":"Deuter, Andreas","id":"62088"},{"last_name":"Otte","first_name":"Andreas","full_name":"Otte, Andreas","id":"51466"},{"first_name":"Marcel","full_name":"Ebert, Marcel","last_name":"Ebert"},{"full_name":"Possel-Dölken, Frank","last_name":"Possel-Dölken","first_name":"Frank"}],"volume":24,"citation":{"ieee":"A. Deuter, A. Otte, M. Ebert, and F. Possel-Dölken, Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study, vol. 24. Amsterdam [u.a.]: Elsevier BV, 2018, pp. 107–113. doi: 10.1016/j.promfg.2018.06.020.","ama":"Deuter A, Otte A, Ebert M, Possel-Dölken F. Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study. Vol 24. (Denkena B, Thoben KD, Trachtler A, eds.). Elsevier BV; 2018:107-113. doi:10.1016/j.promfg.2018.06.020","short":"A. Deuter, A. Otte, M. Ebert, F. Possel-Dölken, Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study, Elsevier BV, Amsterdam [u.a.], 2018.","chicago-de":"Deuter, Andreas, Andreas Otte, Marcel Ebert und Frank Possel-Dölken. 2018. Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study. Hg. von B. Denkena, K. D. Thoben, und A. Trachtler. 4th International Conference on System-Integrated Intelligence - Intelligent, Flexible and Connected Systems in Products and Production. Bd. 24. Procedia Manufacturing. Amsterdam [u.a.]: Elsevier BV. doi:10.1016/j.promfg.2018.06.020, .","din1505-2-1":"Deuter, Andreas ; Otte, Andreas ; Ebert, Marcel ; Possel-Dölken, Frank ; Denkena, B. ; Thoben, K. D. ; Trachtler, A. (Hrsg.): Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study, Procedia Manufacturing. Bd. 24. Amsterdam [u.a.] : Elsevier BV, 2018","apa":"Deuter, A., Otte, A., Ebert, M., & Possel-Dölken, F. (2018). Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study. In B. Denkena, K. D. Thoben, & A. Trachtler (Eds.), 4th International Conference on System-Integrated Intelligence - Intelligent, Flexible and Connected Systems in Products and Production (Vol. 24, pp. 107–113). Elsevier BV. https://doi.org/10.1016/j.promfg.2018.06.020","chicago":"Deuter, Andreas, Andreas Otte, Marcel Ebert, and Frank Possel-Dölken. Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study. Edited by B. Denkena, K. D. Thoben, and A. Trachtler. 4th International Conference on System-Integrated Intelligence - Intelligent, Flexible and Connected Systems in Products and Production. Vol. 24. Procedia Manufacturing. Amsterdam [u.a.]: Elsevier BV, 2018. https://doi.org/10.1016/j.promfg.2018.06.020.","van":"Deuter A, Otte A, Ebert M, Possel-Dölken F. Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study. Denkena B, Thoben KD, Trachtler A, editors. 4th International Conference on System-Integrated Intelligence - Intelligent, Flexible and Connected Systems in Products and Production. Amsterdam [u.a.]: Elsevier BV; 2018. (Procedia Manufacturing; vol. 24).","bjps":"Deuter A et al. (2018) Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study, Denkena B, Thoben KD and Trachtler A (eds). Amsterdam [u.a.]: Elsevier BV.","mla":"Deuter, Andreas, et al. “Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study.” 4th International Conference on System-Integrated Intelligence - Intelligent, Flexible and Connected Systems in Products and Production, edited by B. Denkena et al., vol. 24, Elsevier BV, 2018, pp. 107–13, https://doi.org/10.1016/j.promfg.2018.06.020.","havard":"A. Deuter, A. Otte, M. Ebert, F. Possel-Dölken, Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study, Elsevier BV, Amsterdam [u.a.], 2018.","ufg":"Deuter, Andreas u. a.: Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study, Bd. 24, hg. von Denkena, B./Thoben, K.D./Trachtler, A., Amsterdam [u.a.] 2018 (Procedia Manufacturing)."},"title":"Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study","keyword":["Product lifecycle management","Application Lifecycle Management","Smart products","Systems engineering"],"language":[{"iso":"eng"}],"editor":[{"last_name":"Denkena","first_name":"B.","full_name":"Denkena, B."},{"last_name":"Thoben","full_name":"Thoben, K. D. ","first_name":"K. D. "},{"first_name":"A.","last_name":"Trachtler","full_name":"Trachtler, A."}],"date_updated":"2025-06-26T13:39:42Z","publication":"4th International Conference on System-Integrated Intelligence - Intelligent, Flexible and Connected Systems in Products and Production","publication_identifier":{"issn":["2351-9789"]},"date_created":"2025-04-15T12:50:25Z"},{"pmid":"1","page":"313-317","status":"public","year":"2017","author":[{"orcid":"0000-0001-6939-7630","full_name":"Bruland, Philipp","last_name":"Bruland","id":"75847","first_name":"Philipp"},{"first_name":"J","last_name":"Doods","full_name":"Doods, J"},{"first_name":"M","full_name":"Storck, M","last_name":"Storck"},{"first_name":"M","full_name":"Dugas, M","last_name":"Dugas"}],"external_id":{"pmid":["29295106"]},"volume":245,"citation":{"short":"P. Bruland, J. Doods, M. Storck, M. Dugas, Studies in Health Technology and Informatics 245 (2017) 313–317.","chicago-de":"Bruland, Philipp, J Doods, M Storck und M Dugas. 2017. What Information Does Your EHR Contain? Automatic Generation of a Clinical Metadata Warehouse (CMDW) to Support Identification and Data Access Within Distributed Clinical Research Networks. Studies in health technology and informatics 245: 313–317.","din1505-2-1":"Bruland, Philipp ; Doods, J ; Storck, M ; Dugas, M: What Information Does Your EHR Contain? Automatic Generation of a Clinical Metadata Warehouse (CMDW) to Support Identification and Data Access Within Distributed Clinical Research Networks. In: Studies in health technology and informatics Bd. 245 (2017), S. 313–317","ama":"Bruland P, Doods J, Storck M, Dugas M. What Information Does Your EHR Contain? Automatic Generation of a Clinical Metadata Warehouse (CMDW) to Support Identification and Data Access Within Distributed Clinical Research Networks. Studies in health technology and informatics. 2017;245:313-317.","van":"Bruland P, Doods J, Storck M, Dugas M. What Information Does Your EHR Contain? Automatic Generation of a Clinical Metadata Warehouse (CMDW) to Support Identification and Data Access Within Distributed Clinical Research Networks. Studies in health technology and informatics. 2017;245:313–7.","havard":"P. Bruland, J. Doods, M. Storck, M. Dugas, What Information Does Your EHR Contain? Automatic Generation of a Clinical Metadata Warehouse (CMDW) to Support Identification and Data Access Within Distributed Clinical Research Networks., Studies in Health Technology and Informatics. 245 (2017) 313–317.","bjps":"Bruland P et al. (2017) What Information Does Your EHR Contain? Automatic Generation of a Clinical Metadata Warehouse (CMDW) to Support Identification and Data Access Within Distributed Clinical Research Networks. Studies in health technology and informatics 245, 313–317.","mla":"Bruland, Philipp, et al. “What Information Does Your EHR Contain? Automatic Generation of a Clinical Metadata Warehouse (CMDW) to Support Identification and Data Access Within Distributed Clinical Research Networks.” Studies in Health Technology and Informatics, vol. 245, 2017, pp. 313–17.","ufg":"Bruland, Philipp u. a.: What Information Does Your EHR Contain? Automatic Generation of a Clinical Metadata Warehouse (CMDW) to Support Identification and Data Access Within Distributed Clinical Research Networks., in: Studies in health technology and informatics 245 (2017), S. 313–317.","ieee":"P. Bruland, J. Doods, M. Storck, and M. Dugas, “What Information Does Your EHR Contain? Automatic Generation of a Clinical Metadata Warehouse (CMDW) to Support Identification and Data Access Within Distributed Clinical Research Networks.,” Studies in health technology and informatics, vol. 245, pp. 313–317, 2017.","apa":"Bruland, P., Doods, J., Storck, M., & Dugas, M. (2017). What Information Does Your EHR Contain? Automatic Generation of a Clinical Metadata Warehouse (CMDW) to Support Identification and Data Access Within Distributed Clinical Research Networks. Studies in Health Technology and Informatics, 245, 313–317.","chicago":"Bruland, Philipp, J Doods, M Storck, and M Dugas. “What Information Does Your EHR Contain? Automatic Generation of a Clinical Metadata Warehouse (CMDW) to Support Identification and Data Access Within Distributed Clinical Research Networks.” Studies in Health Technology and Informatics 245 (2017): 313–17."},"extern":"1","title":"What Information Does Your EHR Contain? Automatic Generation of a Clinical Metadata Warehouse (CMDW) to Support Identification and Data Access Within Distributed Clinical Research Networks.","language":[{"iso":"eng"}],"keyword":["Information Systems","Metadata","Semantics"],"date_updated":"2024-07-18T13:42:49Z","date_created":"2024-06-24T07:36:24Z","publication_identifier":{"eissn":["1879-8365"],"issn":["0926-9630"]},"publication":"Studies in health technology and informatics","department":[{"_id":"DEP5024"}],"abstract":[{"text":"Data dictionaries provide structural meta-information about data definitions in health information technology (HIT) systems. In this regard, reusing healthcare data for secondary purposes offers several advantages (e.g. reduce documentation times or increased data quality). Prerequisites for data reuse are its quality, availability and identical meaning of data. In diverse projects, research data warehouses serve as core components between heterogeneous clinical databases and various research applications. Given the complexity (high number of data elements) and dynamics (regular updates) of electronic health record (EHR) data structures, we propose a clinical metadata warehouse (CMDW) based on a metadata registry standard. Metadata of two large hospitals were automatically inserted into two CMDWs containing 16,230 forms and 310,519 data elements. Automatic updates of metadata are possible as well as semantic annotations. A CMDW allows metadata discovery, data quality assessment and similarity analyses. Common data models for distributed research networks can be established based on similarity analyses.","lang":"eng"}],"publication_status":"published","_id":"11576","user_id":"83781","intvolume":" 245","type":"journal_article"},{"issue":"1","abstract":[{"lang":"eng","text":"The maintenance of a tool for injection molding or forming is usually accompanied by its disassembly and assembly. The duration of the assembly activities is often a large part of the total activity time for the maintenance of the tool. The degree of performance of the employees in the execution of these disassembly and assembly activities is often low. In addition, allowances occur (e.g. searching for work equipment). At the Industrial Engineering Lab of the Ostwestfalen-Lippe University of Applied Sciences, a prototype of an assistance system was developed to support the assembly activities in toolmaking. With the help of this system, the operator is guided step by step through the assembly process. The economic potential of the system exists in the reduction of training times, the avoidance of assembly errors and the increase of labor productivity."}],"ddc":["620"],"department":[{"_id":"DEP7020"},{"_id":"DEP1305"}],"conference":{"start_date":"2017-12-10","end_date":"2017-12-13","name":"IEEE International Conference on Industrial Engineering and Engineering Management ","location":"Singapore"},"quality_controlled":"1","type":"conference","user_id":"74004","_id":"265","doi":"https://doi.org/10.1109/IEEM.2017.8290157","place":"Danvers","title":"Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools","citation":{"short":"S. Hinrichsen, D. Riediger, A. Unrau, in: IEEE/ IEEM (Ed.), 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Danvers, 2017, pp. 1571–1575.","chicago-de":"Hinrichsen, Sven, Daniel Riediger und Alexander Unrau. 2017. Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools. In: 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), hg. von IEEE/ IEEM, 1571–1575. Danvers. doi:https://doi.org/10.1109/IEEM.2017.8290157, .","din1505-2-1":"Hinrichsen, Sven ; Riediger, Daniel ; Unrau, Alexander: Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools. In: IEEE/ IEEM (Hrsg.): 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). Danvers, 2017, S. 1571–1575","apa":"Hinrichsen, S., Riediger, D., & Unrau, A. (2017). Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools. In IEEE/ IEEM (Ed.), 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) (pp. 1571–1575). Danvers. https://doi.org/10.1109/IEEM.2017.8290157","chicago":"Hinrichsen, Sven, Daniel Riediger, and Alexander Unrau. “Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools.” In 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), edited by IEEE/ IEEM, 1571–75. Danvers, 2017. https://doi.org/10.1109/IEEM.2017.8290157.","van":"Hinrichsen S, Riediger D, Unrau A. Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools. In: IEEE/ IEEM, editor. 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). Danvers; 2017. p. 1571–5.","ufg":"Hinrichsen, Sven et. al. (2017): Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools, in: IEEE/ IEEM (Hg.): 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Danvers, S. 1571–1575.","mla":"Hinrichsen, Sven, et al. “Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools.” 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), edited by IEEE/ IEEM, no. 1, 2017, pp. 1571–75, doi:https://doi.org/10.1109/IEEM.2017.8290157.","bjps":"Hinrichsen S, Riediger D and Unrau A (2017) Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools. In IEEE/ IEEM (ed.), 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). Danvers, pp. 1571–1575.","havard":"S. Hinrichsen, D. Riediger, A. Unrau, Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools, in: IEEE/ IEEM (Ed.), 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Danvers, 2017: pp. 1571–1575.","ieee":"S. Hinrichsen, D. Riediger, and A. Unrau, “Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools,” in 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Singapore, 2017, no. 1, pp. 1571–1575.","ama":"Hinrichsen S, Riediger D, Unrau A. Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools. In: IEEE/ IEEM, ed. 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). Danvers; 2017:1571-1575. doi:https://doi.org/10.1109/IEEM.2017.8290157"},"author":[{"last_name":"Hinrichsen","full_name":"Hinrichsen, Sven","id":"49010","first_name":"Sven"},{"first_name":"Daniel","last_name":"Riediger","full_name":"Riediger, Daniel","id":"52263"},{"full_name":"Unrau, Alexander","id":"64690","first_name":"Alexander","last_name":"Unrau"}],"year":2017,"status":"public","page":"1571-1575","publication_identifier":{"isbn":["978-1-5386-0948-4 "]},"publication":"2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM)","date_created":"2018-11-26T11:59:27Z","corporate_editor":["IEEE/ IEEM"],"date_updated":"2023-03-15T13:49:41Z","keyword":["injection moulding","machine tools","maintenance engineering","productivity","projection-based assistance system","injection molding tools","assembly activities","assembly process","assembly errors","tool maintenance","disassembly activities","economic potential","Industrial Engineering Lab","Ostwestfalen-Lippe University of Applied Sciences","toolmaking","Tools","Injection molding","Maintenance engineering","Usability","Task analysis","Workstations","Morphology","assembly assistance systems","assistance systems","maintenance of injection molding tools","manual assembly"],"language":[{"iso":"eng"}]},{"author":[{"full_name":"Fellmann, Michael","first_name":"Michael","last_name":"Fellmann"},{"first_name":"Sebastian","full_name":"Robert, Sebastian","last_name":"Robert"},{"full_name":"Büttner, Sebastian","first_name":"Sebastian","id":"61868","last_name":"Büttner"},{"last_name":"Mucha","first_name":"Henrik","full_name":"Mucha, Henrik","id":"64896"},{"full_name":"Röcker, Carsten","last_name":"Röcker","id":"61525","first_name":"Carsten"}],"year":2017,"main_file_link":[{"open_access":"1"}],"status":"public","page":"59-68","title":"Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories","volume":10410,"citation":{"ama":"Fellmann M, Robert S, Büttner S, Mucha H, Röcker C. Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories. In: Holzinger A, ed. Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings. Vol 10410. Lecture Notes in Computer Science . Cham: Springer; 2017:59-68. doi:10.1007/978-3-319-66808-6_5","ieee":"M. Fellmann, S. Robert, S. Büttner, H. Mucha, and C. Röcker, “Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories,” in Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, Reggio, Italy, 2017, vol. 10410, pp. 59–68.","din1505-2-1":"Fellmann, Michael ; Robert, Sebastian ; Büttner, Sebastian ; Mucha, Henrik ; Röcker, Carsten: Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories. In: Holzinger, A. (Hrsg.): Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, Lecture Notes in Computer Science . Bd. 10410. Cham : Springer, 2017, S. 59–68","chicago-de":"Fellmann, Michael, Sebastian Robert, Sebastian Büttner, Henrik Mucha und Carsten Röcker. 2017. Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories. In: Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, hg. von Andreas Holzinger, 10410:59–68. Lecture Notes in Computer Science . Cham: Springer. doi:10.1007/978-3-319-66808-6_5, .","short":"M. Fellmann, S. Robert, S. Büttner, H. Mucha, C. Röcker, in: A. Holzinger (Ed.), Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, Springer, Cham, 2017, pp. 59–68.","mla":"Fellmann, Michael, et al. “Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories.” Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, edited by Andreas Holzinger, vol. 10410, Springer, 2017, pp. 59–68, doi:10.1007/978-3-319-66808-6_5.","bjps":"Fellmann M et al. (2017) Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories. In Holzinger A (ed.), Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, vol. 10410. Cham: Springer, pp. 59–68.","havard":"M. Fellmann, S. Robert, S. Büttner, H. Mucha, C. Röcker, Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories, in: A. Holzinger (Ed.), Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, Springer, Cham, 2017: pp. 59–68.","ufg":"Fellmann, Michael et. al. (2017): Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories, in: Andreas Holzinger (Hg.): Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings (=Lecture Notes in Computer Science 10410), Cham, S. 59–68.","van":"Fellmann M, Robert S, Büttner S, Mucha H, Röcker C. Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories. In: Holzinger A, editor. Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 84, 89, 129 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings. Cham: Springer; 2017. p. 59–68. (Lecture Notes in Computer Science ; vol. 10410).","chicago":"Fellmann, Michael, Sebastian Robert, Sebastian Büttner, Henrik Mucha, and Carsten Röcker. “Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories.” In Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, edited by Andreas Holzinger, 10410:59–68. Lecture Notes in Computer Science . Cham: Springer, 2017. https://doi.org/10.1007/978-3-319-66808-6_5.","apa":"Fellmann, M., Robert, S., Büttner, S., Mucha, H., & Röcker, C. (2017). Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories. In A. Holzinger (Ed.), Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings (Vol. 10410, pp. 59–68). Cham: Springer. https://doi.org/10.1007/978-3-319-66808-6_5"},"oa":"1","keyword":["Assistance systems","Smart factory","Production processes"],"language":[{"iso":"eng"}],"publication":" Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings","publication_identifier":{"isbn":["978-3-319-66807-9"],"eisbn":["9783319668086 "]},"date_created":"2020-12-10T13:40:05Z","editor":[{"last_name":"Holzinger","full_name":"Holzinger, Andreas","first_name":"Andreas"}],"date_updated":"2023-03-15T13:49:51Z","abstract":[{"lang":"eng","text":"Increasingly, production processes are enabled and controlled by Information Technology (IT), a development being also referred to as “Industry 4.0”. IT thereby contributes to flexible and adaptive production processes, and in this sense factories become “smart factories”. In line with this, IT also more and more supports human workers via various assistance systems. This support aims to both support workers to better execute their tasks and to reduce the effort and time required when working. However, due to the large spectrum of assistance systems, it is hard to acquire an overview and to select an adequate system for a smart factory based on meaningful criteria. We therefore synthesize a set of comparison criteria into a consistent framework and demonstrate the application of our framework by classifying three examples."}],"conference":{"end_date":"2017-09-01","start_date":"2017-08-29","location":"Reggio, Italy","name":"International Cross-Domain Conference, CD-MAKE 2017"},"department":[{"_id":"DEP5023"}],"publisher":"Springer","series_title":"Lecture Notes in Computer Science ","publication_status":"published","_id":"4255","doi":"10.1007/978-3-319-66808-6_5","place":"Cham","type":"conference","intvolume":" 10410","user_id":"15514"},{"_id":"4506","doi":"10.1007/978-3-662-55232-2","place":"Berlin","intvolume":" 7","user_id":"83781","type":"book_editor","publisher":"Springer Vieweg","abstract":[{"lang":"ger","text":"In diesem Tagungsband sind die besten Beiträge des 7. Jahreskolloquiums \"Kommunikation in der Automation\" (KommA 2016) und des 5. Jahreskolloquiums \"Bildverarbeitung in der Automation\" (BVAu 2016) enthalten. Die Kolloquien fanden am 30. November und 1. Dezember 2016 anlässlich des 10jährigen Jubiläums des inIT - Institut für industrielle Informationstechnik in der SmartFactoryOWL, einer herstellerunabhängigen und offenen Industrie 4.0 Forschungs- und Demonstrationsplattform und zugleich Testfeld für den Mittelstand, in Lemgo statt.\r\nDie vorgestellten neuesten Forschungsergebnisse auf den Gebieten der industriellen Kommunikationstechnik und Bildverarbeitung erweitern den aktuellen Stand der Forschung und Technik. Die in den Beiträgen enthaltenen anschauliche Anwendungsbeispiele aus dem Bereich der Automation setzen die Ergebnisse in den direkten Anwendungsbezug."}],"conference":{"end_date":"2026-12-01","start_date":"2016-11-30","location":"Lemgo","name":"7. Jahreskolloquiums \"Kommunikation in der Automation\" (KommA 2016) / 5. Jahreskolloquiums \"Bildverarbeitung in der Automation\" (BVAu 2016)"},"department":[{"_id":"DEP5023"}],"publication_status":"published","series_title":"Technologien für die intelligente Automation ","keyword":["Industrielle Kommunikationstechnik","Industrielle Bildverarbeitung","network reliability and redundancy methods","Networked Controls Systems","wireless real-time communication","quality control","reliability","safety and risk"],"language":[{"iso":"ger"}],"editor":[{"id":"1899","first_name":"Jürgen","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen"},{"first_name":"Volker","id":"1804","last_name":"Lohweg","full_name":"Lohweg, Volker","orcid":"0000-0002-3325-7887"}],"date_updated":"2025-05-12T08:19:51Z","publication_identifier":{"eisbn":["978-3-662-55232-2 "],"isbn":["978-3-662-55231-5"]},"date_created":"2021-01-22T08:40:04Z","status":"public","page":"295","year":"2017","citation":{"ama":"Jasperneite J, Lohweg V, eds. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik. Vol 7. Springer Vieweg; 2017. doi:10.1007/978-3-662-55232-2","van":"Jasperneite J, Lohweg V, editors. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik. Berlin: Springer Vieweg; 2017. 295 p. (Technologien für die intelligente Automation ; vol. 7).","bjps":"Jasperneite J and Lohweg V (eds) (2017) Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik. Berlin: Springer Vieweg.","havard":"J. Jasperneite, V. Lohweg, eds., Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik, Springer Vieweg, Berlin, 2017.","mla":"Jasperneite, Jürgen, and Volker Lohweg, editors. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik. Springer Vieweg, 2017, https://doi.org/10.1007/978-3-662-55232-2.","ufg":"Jasperneite, Jürgen/Lohweg, Volker: Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik, Bd. 7, Berlin 2017 (Technologien für die intelligente Automation ).","ieee":"J. Jasperneite and V. Lohweg, Eds., Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik, vol. 7. Berlin: Springer Vieweg, 2017. doi: 10.1007/978-3-662-55232-2.","apa":"Jasperneite, J., & Lohweg, V. (Eds.). (2017). Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik (Vol. 7). Springer Vieweg. https://doi.org/10.1007/978-3-662-55232-2","chicago":"Jasperneite, Jürgen, and Volker Lohweg, eds. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik. Vol. 7. Technologien für die intelligente Automation . Berlin: Springer Vieweg, 2017. https://doi.org/10.1007/978-3-662-55232-2.","short":"J. Jasperneite, V. Lohweg, eds., Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik, Springer Vieweg, Berlin, 2017.","chicago-de":"Jasperneite, Jürgen und Volker Lohweg, Hrsg. 2017. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik. Bd. 7. Technologien für die intelligente Automation . Berlin: Springer Vieweg. doi:10.1007/978-3-662-55232-2, .","din1505-2-1":"Jasperneite, J. ; Lohweg, V. (Hrsg.): Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik, Technologien für die intelligente Automation . Bd. 7. Berlin : Springer Vieweg, 2017"},"volume":7,"title":" Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik"},{"place":"Danvers","doi":"10.1109/ICDCM.2017.8001049","_id":"328","user_id":"45673","type":"conference","conference":{"name":"IEEE Second International Conference on DC Microgrids (ICDCM) ","location":"Nürnberg","start_date":"2017-06-27","end_date":"2017-06-29"},"department":[{"_id":"DEP5018"}],"abstract":[{"text":"In this paper, concepts for an extended DC network for the main power supply of components from various manufacturers in industrial production are presented. In the first part, detailed requirements for such a network are given from the viewpoint of a customer. Based on those, different concepts for AC/DC conversion and energy management are discussed. As far as AC/DC conversion is concerned, the advantages and drawbacks of several rectifier topologies are listed, as they have a significant impact on the system behavior and EMC properties. \r\nAn intelligent energy management can improve the energy efficiency and reduce downtimes of a plant, which are major requirements from a customer’s viewpoint. ","lang":"eng"}],"issue":"1","language":[{"iso":"eng"}],"keyword":["AC-DC power convertors","electromagnetic compatibility","energy conservation","energy management systems","rectifiers","main power supply","industrial production","DC network","AC-DC conversion","rectifier topologies","EMC properties","intelligent energy management","energy efficiency improvement","downtime reduction","Rectifiers","Switches","Voltage control","Topology","Network topology","Production","Grounding","industrial DC grid","SMART Grid"],"related_material":{"link":[{"relation":"contains","url":"https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8001049"}]},"date_updated":"2023-03-15T13:49:46Z","corporate_editor":["Institute of Electrical and Electronics Engineers (IEEE)"],"date_created":"2018-12-10T15:11:18Z","publication":"2017 IEEE Second International Conference on DC Microgrids (ICDCM)","page":"227-234","status":"public","year":2017,"main_file_link":[{"url":"https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8001049"}],"author":[{"last_name":"Borcherding","first_name":"Holger","id":"1693","full_name":"Borcherding, Holger"},{"first_name":"Johann","last_name":"Austermann","id":"42114","full_name":"Austermann, Johann"},{"first_name":"Timm","full_name":"Kuhlmann, Timm","last_name":"Kuhlmann"},{"last_name":"Weis","first_name":"Benno","full_name":"Weis, Benno"},{"full_name":"Leonide, Andre","last_name":"Leonide","first_name":"Andre"}],"citation":{"van":"Borcherding H, Austermann J, Kuhlmann T, Weis B, Leonide A. Concepts for a DC Network in Industrial Production. In: Institute of Electrical and Electronics Engineers (IEEE), editor. 2017 IEEE Second International Conference on DC Microgrids (ICDCM). Danvers; 2017. p. 227–34.","ufg":"Borcherding, Holger et. al. (2017): Concepts for a DC Network in Industrial Production, in: Institute of Electrical and Electronics Engineers (IEEE) (Hg.): 2017 IEEE Second International Conference on DC Microgrids (ICDCM), Danvers, S. 227–234.","bjps":"Borcherding H et al. (2017) Concepts for a DC Network in Industrial Production. In Institute of Electrical and Electronics Engineers (IEEE) (ed.), 2017 IEEE Second International Conference on DC Microgrids (ICDCM). Danvers, pp. 227–234.","havard":"H. Borcherding, J. Austermann, T. Kuhlmann, B. Weis, A. Leonide, Concepts for a DC Network in Industrial Production, in: Institute of Electrical and Electronics Engineers (IEEE) (Ed.), 2017 IEEE Second International Conference on DC Microgrids (ICDCM), Danvers, 2017: pp. 227–234.","mla":"Borcherding, Holger, et al. “Concepts for a DC Network in Industrial Production.” 2017 IEEE Second International Conference on DC Microgrids (ICDCM), edited by Institute of Electrical and Electronics Engineers (IEEE), no. 1, 2017, pp. 227–34, doi:10.1109/ICDCM.2017.8001049.","apa":"Borcherding, H., Austermann, J., Kuhlmann, T., Weis, B., & Leonide, A. (2017). Concepts for a DC Network in Industrial Production. In Institute of Electrical and Electronics Engineers (IEEE) (Ed.), 2017 IEEE Second International Conference on DC Microgrids (ICDCM) (pp. 227–234). Danvers. https://doi.org/10.1109/ICDCM.2017.8001049","chicago":"Borcherding, Holger, Johann Austermann, Timm Kuhlmann, Benno Weis, and Andre Leonide. “Concepts for a DC Network in Industrial Production.” In 2017 IEEE Second International Conference on DC Microgrids (ICDCM), edited by Institute of Electrical and Electronics Engineers (IEEE), 227–34. Danvers, 2017. https://doi.org/10.1109/ICDCM.2017.8001049.","short":"H. Borcherding, J. Austermann, T. Kuhlmann, B. Weis, A. Leonide, in: Institute of Electrical and Electronics Engineers (IEEE) (Ed.), 2017 IEEE Second International Conference on DC Microgrids (ICDCM), Danvers, 2017, pp. 227–234.","chicago-de":"Borcherding, Holger, Johann Austermann, Timm Kuhlmann, Benno Weis und Andre Leonide. 2017. Concepts for a DC Network in Industrial Production. In: 2017 IEEE Second International Conference on DC Microgrids (ICDCM), hg. von Institute of Electrical and Electronics Engineers (IEEE), 227–234. Danvers. doi:10.1109/ICDCM.2017.8001049, .","din1505-2-1":"Borcherding, Holger ; Austermann, Johann ; Kuhlmann, Timm ; Weis, Benno ; Leonide, Andre: Concepts for a DC Network in Industrial Production. In: Institute of Electrical and Electronics Engineers (IEEE) (Hrsg.): 2017 IEEE Second International Conference on DC Microgrids (ICDCM). Danvers, 2017, S. 227–234","ama":"Borcherding H, Austermann J, Kuhlmann T, Weis B, Leonide A. Concepts for a DC Network in Industrial Production. In: Institute of Electrical and Electronics Engineers (IEEE), ed. 2017 IEEE Second International Conference on DC Microgrids (ICDCM). Danvers; 2017:227-234. doi:10.1109/ICDCM.2017.8001049","ieee":"H. Borcherding, J. Austermann, T. Kuhlmann, B. Weis, and A. Leonide, “Concepts for a DC Network in Industrial Production,” in 2017 IEEE Second International Conference on DC Microgrids (ICDCM), Nürnberg, 2017, no. 1, pp. 227–234."},"title":"Concepts for a DC Network in Industrial Production"},{"date_updated":"2024-04-19T12:58:56Z","related_material":{"link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf","relation":"contains"}]},"editor":[{"first_name":"Elio","full_name":"Padoano, Elio","last_name":"Padoano"},{"full_name":"Villmer, Franz-Josef","id":"14290","first_name":"Franz-Josef","last_name":"Villmer"}],"corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"date_created":"2019-02-18T11:16:07Z","publication":"Production Engineering and Management","publication_identifier":{"isbn":["978-3-946856-01-6"]},"language":[{"iso":"eng"}],"keyword":["Additive manufacturing","Embedded optical waveguides","Electrical conductors","Embedded systems","FLM technology","Sensors"],"oa":"1","citation":{"apa":"Ehlert, P., Stübbe, O., & Villmer, F.-J. (2017). Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology. In E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management (Issue 1, pp. 127–136).","ieee":"P. Ehlert, O. Stübbe, and F.-J. Villmer, “Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology,” in Production Engineering and Management, Pordenone, Italy, 2017, no. 1, pp. 127–136.","chicago":"Ehlert, Patrick, Oliver Stübbe, and Franz-Josef Villmer. “Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, Department of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, 127–36. Publication Series in Direct Digital Manufacturing . Lemgo, 2017.","van":"Ehlert P, Stübbe O, Villmer FJ. Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology. In: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, editors. Production Engineering and Management. Lemgo; 2017. p. 127–36. (Publication series in direct digital manufacturing ).","ama":"Ehlert P, Stübbe O, Villmer FJ. Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology. In: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management. Publication series in direct digital manufacturing . ; 2017:127-136.","ufg":"Ehlert, Patrick/Stübbe, Oliver/Villmer, Franz-Josef: Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology, in: Padoano, Elio u. a. (Hgg.): Production Engineering and Management, Lemgo 2017 (Publication series in direct digital manufacturing ), S. 127–136.","havard":"P. Ehlert, O. Stübbe, F.-J. Villmer, Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management, Lemgo, 2017: pp. 127–136.","mla":"Ehlert, Patrick, et al. “Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2017, pp. 127–36.","bjps":"Ehlert P, Stübbe O and Villmer F-J (2017) Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology. In Padoano E et al. (eds), Production Engineering and Management. Lemgo, pp. 127–136.","short":"P. Ehlert, O. Stübbe, F.-J. Villmer, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management, Lemgo, 2017, pp. 127–136.","chicago-de":"Ehlert, Patrick, Oliver Stübbe und Franz-Josef Villmer. 2017. Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, Department of Production Engineering and Management, und Hochschule Ostwestfalen-Lippe, 127–136. Publication series in direct digital manufacturing . Lemgo.","din1505-2-1":"Ehlert, Patrick ; Stübbe, Oliver ; Villmer, Franz-Josef: Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management ; Hochschule Ostwestfalen-Lippe (Hrsg.): Production Engineering and Management, Publication series in direct digital manufacturing . Lemgo, 2017, S. 127–136"},"extern":"1","title":"Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology","page":"127-136","status":"public","year":"2017","main_file_link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf","open_access":"1"}],"author":[{"first_name":"Patrick","last_name":"Ehlert","full_name":"Ehlert, Patrick","id":"62091"},{"full_name":"Stübbe, Oliver","last_name":"Stübbe","id":"51864","first_name":"Oliver","orcid":"https://orcid.org/0000-0001-7293-6893"},{"last_name":"Villmer","full_name":"Villmer, Franz-Josef","id":"14290","first_name":"Franz-Josef"}],"user_id":"51864","type":"conference","place":"Lemgo","_id":"573","publication_status":"published","series_title":"Publication series in direct digital manufacturing ","quality_controlled":"1","conference":{"name":"Proceedings7th International Conference","location":"Pordenone, Italy","end_date":"2017-09-29","start_date":"2017-09-28"},"department":[{"_id":"DEP1306"},{"_id":"DEP5020"},{"_id":"DEP5000"},{"_id":"DEP6020"}],"abstract":[{"lang":"eng","text":"Additive manufacturing (AM) technologies have not only revolutionized product development and design by enabling rapid prototyping. They also gained influence on production in general, mainly because of their direct manufacturing capabilities. In the context of Industry 4.0 and the related process automation, innovative and advanced production technologies with completely new approaches are required [1]. AM technologies contribute to this with their advantages like freedom of design, cost efficient product individualization, and functional integration. On the other hand, AM still shows shortcomings in exploiting its full potential. Most current AM technologies are only applicable for manufacturing with singular materials. In particular, opportunities for processing of optically or electrically conductive materials are still missing. This paper contributes to the advancement of additive manufacturing of two different material variants or even two completely different materials. A special focus is laid on producing a part that combines mechanical with optical or electrical functionalities in one process step. The ultimate goal is to integrate sensor functionalities into an AM object, e.g. strain gauges. Extrusion processes, predominantly Fused Layer Modeling (FLM), are preferred in this research due to their mechanically simple machine setup in which additional functional materials can be adapted easily to the build process. In a first step, the general manufacturability has been evaluated. Thereafter, the resulting optical transmission properties have been analyzed. Especially the attenuation has to remain below a threshold value to accomplish a minimum signal-to-noise ratio."}],"issue":"1"},{"title":"Extending the Sliced V-Model to Smart Product Development","citation":{"chicago":"Deuter, Andreas, Andreas Otte, and Marcel Ebert. “Extending the Sliced V-Model to Smart Product Development.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 115–25. Lemgo, 2017.","apa":"Deuter, A., Otte, A., & Ebert, M. (2017). Extending the Sliced V-Model to Smart Product Development. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 115–125). Lemgo.","havard":"A. Deuter, A. Otte, M. Ebert, Extending the Sliced V-Model to Smart Product Development, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017: pp. 115–125.","bjps":"Deuter A, Otte A and Ebert M (2017) Extending the Sliced V-Model to Smart Product Development. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 115–125.","mla":"Deuter, Andreas, et al. “Extending the Sliced V-Model to Smart Product Development.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2017, pp. 115–25.","ufg":"Deuter, Andreas et. al. (2017): Extending the Sliced V-Model to Smart Product Development, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 115–125.","van":"Deuter A, Otte A, Ebert M. Extending the Sliced V-Model to Smart Product Development. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2017. p. 115–25.","din1505-2-1":"Deuter, Andreas ; Otte, Andreas ; Ebert, Marcel: Extending the Sliced V-Model to Smart Product Development. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2017, S. 115–125","chicago-de":"Deuter, Andreas, Andreas Otte und Marcel Ebert. 2017. Extending the Sliced V-Model to Smart Product Development. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 115–125. Lemgo.","short":"A. Deuter, A. Otte, M. Ebert, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017, pp. 115–125.","ieee":"A. Deuter, A. Otte, and M. Ebert, “Extending the Sliced V-Model to Smart Product Development,” in Production Engineering and Management, Pordenone, Italy, 2017, no. 1, pp. 115–125.","ama":"Deuter A, Otte A, Ebert M. Extending the Sliced V-Model to Smart Product Development. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2017:115-125."},"year":2017,"main_file_link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf","open_access":"1"}],"author":[{"full_name":"Deuter, Andreas","first_name":"Andreas","id":"62088","last_name":"Deuter"},{"id":"51466","last_name":"Otte","full_name":"Otte, Andreas","first_name":"Andreas"},{"last_name":"Ebert","id":"52288","first_name":"Marcel","full_name":"Ebert, Marcel"}],"status":"public","page":"115-125","publication_identifier":{"isbn":["978-3-946856-01-6"]},"publication":"Production Engineering and Management","date_created":"2019-02-18T11:34:36Z","date_updated":"2023-03-15T13:50:01Z","related_material":{"link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf","relation":"contains"}]},"corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"editor":[{"last_name":"Padoano","full_name":"Padoano, Elio","first_name":"Elio"},{"first_name":"Franz-Josef","full_name":"Villmer, Franz-Josef","last_name":"Villmer"}],"oa":"1","keyword":["PLM","ALM","Systems Engineering","VDI guideline 2206"],"language":[{"iso":"eng"}],"publication_status":"published","conference":{"location":"Pordenone, Italy","name":"Proceedings 7th International Conference","end_date":"2017-09-29","start_date":"2017-09-28"},"department":[{"_id":"DEP1306"},{"_id":"DEP7022"}],"issue":"1","abstract":[{"text":"The increasing industrial digitization is the driver for the fast emergence of many industrial smart products. To stay competitive, the manufacturing companies of these smart products need to optimize their internal lifecycleprocesses. Mainly, they have to converge the software and hardware lifecycleprocesses. However, even if this strategic necessity has been recognized, manufacturing companies struggle to develop and implement a roadmap of such convergence.Starting point for the realization of harmonized lifecycle processes are processmodels describing process activities and the underlying data models. This research addresses the latter one and aims to create a generic lifecycle data model. The research team created and evaluated such data model referring to development artifacts such as requirements, parts or test cases and to lifecycle artifacts such as revisions, versions and baselines. The generic lifecycle management model was evaluated by a practical development of a smart product. By this, the research provides a valuable result to maintain and increase the competitiveness of manufacturing companies.","lang":"eng"}],"type":"conference","user_id":"62088","place":"Lemgo","_id":"574"},{"_id":"578","place":"Lemgo","type":"conference","user_id":"49010","issue":"1","abstract":[{"lang":"eng","text":"Challenges of companies are presented by an increasing number of product variants or a growing product complexity in combination with a reduction of lot size. Therefore the scope of the work in the field of manual assembly will be more complex. This situation leads to a need of assistance systems. With these systems, the assembly workers will be qualified to execute their work tasks within the requirements. This approach set up on a further implementation of an assistance system at a great device manufacturer. The main focus of this implementation was the technical and functional design of the assistance system, but a successful implementation requires also an active handling of the change process. The purpose of this paper is the presentation of design principles in form of a process model for the implementation of digital assistance systems. The development of the design principles takes place in a participative approach. Executives, work councilsand workers develop the project results together with external project members. Project managers will be able to manage implementation processes with the results and take all the success factors into account."}],"conference":{"end_date":"2017-09-29","start_date":"2017-09-28","name":"Proceedings 7th International Conference","location":"Pordenone, Italy"},"department":[{"_id":"DEP1306"},{"_id":"DEP7020"},{"_id":"DEP1305"}],"quality_controlled":"1","publication_status":"published","oa":"1","language":[{"iso":"eng"}],"keyword":["Assistance systems","Change management","Success factors","Process model"],"date_created":"2019-02-18T11:34:36Z","publication":"Production Engineering and Management","publication_identifier":{"isbn":["978-3-946856-01-6"]},"editor":[{"full_name":"Padoano, Elio","first_name":"Elio","last_name":"Padoano"},{"full_name":"Villmer, Franz-Josef","first_name":"Franz-Josef","last_name":"Villmer"}],"corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"date_updated":"2023-03-15T13:50:01Z","year":2017,"author":[{"first_name":"Tim","id":"65024","full_name":"Kleineberg, Tim","last_name":"Kleineberg"},{"id":"60217","first_name":"Matthias","full_name":"Eichelberg, Matthias","last_name":"Eichelberg"},{"last_name":"Hinrichsen","id":"49010","first_name":"Sven","full_name":"Hinrichsen, Sven"}],"main_file_link":[{"open_access":"1","url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf"}],"page":"25-36","status":"public","title":"Participative Development of an Implementation Process for Worker Assistance Systems","citation":{"ama":"Kleineberg T, Eichelberg M, Hinrichsen S. Participative Development of an Implementation Process for Worker Assistance Systems. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2017:25-36.","ieee":"T. Kleineberg, M. Eichelberg, and S. Hinrichsen, “Participative Development of an Implementation Process for Worker Assistance Systems,” in Production Engineering and Management, Pordenone, Italy, 2017, no. 1, pp. 25–36.","short":"T. Kleineberg, M. Eichelberg, S. Hinrichsen, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017, pp. 25–36.","chicago-de":"Kleineberg, Tim, Matthias Eichelberg und Sven Hinrichsen. 2017. Participative Development of an Implementation Process for Worker Assistance Systems. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 25–36. Lemgo.","din1505-2-1":"Kleineberg, Tim ; Eichelberg, Matthias ; Hinrichsen, Sven: Participative Development of an Implementation Process for Worker Assistance Systems. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2017, S. 25–36","van":"Kleineberg T, Eichelberg M, Hinrichsen S. Participative Development of an Implementation Process for Worker Assistance Systems. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2017. p. 25–36.","mla":"Kleineberg, Tim, et al. “Participative Development of an Implementation Process for Worker Assistance Systems.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2017, pp. 25–36.","bjps":"Kleineberg T, Eichelberg M and Hinrichsen S (2017) Participative Development of an Implementation Process for Worker Assistance Systems. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 25–36.","havard":"T. Kleineberg, M. Eichelberg, S. Hinrichsen, Participative Development of an Implementation Process for Worker Assistance Systems, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017: pp. 25–36.","ufg":"Kleineberg, Tim et. al. (2017): Participative Development of an Implementation Process for Worker Assistance Systems, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 25–36.","apa":"Kleineberg, T., Eichelberg, M., & Hinrichsen, S. (2017). Participative Development of an Implementation Process for Worker Assistance Systems. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 25–36). Lemgo.","chicago":"Kleineberg, Tim, Matthias Eichelberg, and Sven Hinrichsen. “Participative Development of an Implementation Process for Worker Assistance Systems.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 25–36. Lemgo, 2017."}},{"corporate_editor":["Fraunhofer IGD "],"related_material":{"link":[{"url":"https://www.th-owl.de/init/uploads/tx_initdb/HCII40_2016_paper_3__7___002_.pdf","relation":"original"}]},"date_updated":"2023-03-15T13:49:51Z","date_created":"2020-12-22T14:11:02Z","publication":"Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 ","language":[{"iso":"eng"}],"keyword":["Industry 4.0","Assistive Systems","Small and Medium-Sized Enterprises","SME","Human-Centered Design","Human-Computer Interaction for Industry"],"oa":"1","citation":{"ama":"Mucha H, Büttner S, Röcker C. Application Areas for Human-Centered Assistive Systems. In: Fraunhofer IGD , ed. Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 . Graz, Österreich: TU; 2016.","ieee":"H. Mucha, S. Büttner, and C. Röcker, “Application Areas for Human-Centered Assistive Systems,” in Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 , Graz, Austria, 2016.","van":"Mucha H, Büttner S, Röcker C. Application Areas for Human-Centered Assistive Systems. In: Fraunhofer IGD , editor. Human-Computer Interaction – Perspectives on Industry 40 Workshop at i-KNOW 2016 . Graz, Österreich: TU; 2016.","bjps":"Mucha H, Büttner S and Röcker C (2016) Application Areas for Human-Centered Assistive Systems. In Fraunhofer IGD (ed.), Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 . Graz, Österreich: TU.","mla":"Mucha, Henrik, et al. “Application Areas for Human-Centered Assistive Systems.” Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 , edited by Fraunhofer IGD , TU, 2016.","havard":"H. Mucha, S. Büttner, C. Röcker, Application Areas for Human-Centered Assistive Systems, in: Fraunhofer IGD (Ed.), Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 , TU, Graz, Österreich, 2016.","ufg":"Mucha, Henrik et. al. (2016): Application Areas for Human-Centered Assistive Systems, in: Fraunhofer IGD (Hg.): Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 , Graz, Österreich.","apa":"Mucha, H., Büttner, S., & Röcker, C. (2016). Application Areas for Human-Centered Assistive Systems. In Fraunhofer IGD (Ed.), Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 . Graz, Österreich: TU.","chicago":"Mucha, Henrik, Sebastian Büttner, and Carsten Röcker. “Application Areas for Human-Centered Assistive Systems.” In Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 , edited by Fraunhofer IGD . Graz, Österreich: TU, 2016.","short":"H. Mucha, S. Büttner, C. Röcker, in: Fraunhofer IGD (Ed.), Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 , TU, Graz, Österreich, 2016.","din1505-2-1":"Mucha, Henrik ; Büttner, Sebastian ; Röcker, Carsten: Application Areas for Human-Centered Assistive Systems. In: Fraunhofer IGD (Hrsg.): Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 . Graz, Österreich : TU, 2016","chicago-de":"Mucha, Henrik, Sebastian Büttner und Carsten Röcker. 2016. Application Areas for Human-Centered Assistive Systems. In: Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 , hg. von Fraunhofer IGD . Graz, Österreich: TU."},"title":"Application Areas for Human-Centered Assistive Systems","status":"public","author":[{"first_name":"Henrik","last_name":"Mucha","id":"64896","full_name":"Mucha, Henrik"},{"last_name":"Büttner","id":"61868","first_name":"Sebastian","full_name":"Büttner, Sebastian"},{"id":"61525","last_name":"Röcker","full_name":"Röcker, Carsten","first_name":"Carsten"}],"year":2016,"main_file_link":[{"open_access":"1"}],"user_id":"15514","type":"conference","_id":"4299","place":"Graz, Österreich","publication_status":"published","publisher":"TU","abstract":[{"text":"With the advances of technology, intelligent assistive systems that adapt to individual humans will become feasible. However, application areas of such systems are rarely discussed within the Industry 4.0 community. Most assistive systems that have been presented have been developed for specific task, such as assembly support or warehouse picking, but there might be a huge uncovered design space to be explored. With this work, we want to step back from existing systems and analyze the design opportunities of assistive systems especially for small and medium-size enterprises (SME). To achieve this goal we conducted a study in four SME, consisting of observations and interviews. Here we present our findings about the potential future application areas of human-centered assistive systems.","lang":"eng"}],"conference":{"name":"Human-Computer Interaction – Perspectives on Industry 4.0. Workshop","location":"Graz, Austria","start_date":"201610-18","end_date":"2016-10-19"},"department":[{"_id":"DEP5023"}]},{"conference":{"start_date":"2016-07-27","end_date":"2016-07-31","location":"Walt Disney World®, Florida, USA","name":"AHFE 2016 International Conference on Affective and Pleasurable Design"},"department":[{"_id":"DEP5023"}],"abstract":[{"lang":"eng","text":"This paper discusses the relevance of beauty and aesthetic values for an aesthetically pleasing design of technology-enhanced spaces in the context of ergonomics, usability, and technology acceptance. Under the concept of Aesthetic Intelligence we subsume various aspects, including conceptual scoping, formal design skills and creative methodologies. Our goal is to provide a concept for the exchange of ideas, initiation of collaborations and the development of methodological practices for facilitating effective and pleasurable designs."}],"publisher":"Springer","series_title":"Aesthetic intelligence Aesthetics Design methodologies Ambient intelligent systems (AISC)","publication_status":"published","place":"Cham","_id":"4328","doi":"10.1007/978-3-319-41661-8_37","type":"conference","user_id":"15514","intvolume":" 483","year":2016,"author":[{"first_name":"Daniela Alina","full_name":"Plewe, Daniela Alina","last_name":"Plewe"},{"last_name":"Röcker","first_name":"Carsten","full_name":"Röcker, Carsten","id":"61525"}],"main_file_link":[{"open_access":"1"}],"status":"public","page":"385-390","title":"Aesthetic Intelligence for Effective and Pleasurable Design","volume":483,"citation":{"short":"D.A. Plewe, C. Röcker, in: W. Chung, C.S. Shin (Eds.), Advances in Affective and Pleasurable Design, Springer, Cham, 2016, pp. 385–390.","chicago-de":"Plewe, Daniela Alina und Carsten Röcker. 2016. Aesthetic Intelligence for Effective and Pleasurable Design. In: Advances in Affective and Pleasurable Design, hg. von WonJoon Chung und Cliff Sungsoo Shin, 483:385–390. Aesthetic intelligence Aesthetics Design methodologies Ambient intelligent systems (AISC). Cham: Springer. doi:10.1007/978-3-319-41661-8_37, .","din1505-2-1":"Plewe, Daniela Alina ; Röcker, Carsten: Aesthetic Intelligence for Effective and Pleasurable Design. In: Chung, W. ; Shin, C. S. (Hrsg.): Advances in Affective and Pleasurable Design, Aesthetic intelligence Aesthetics Design methodologies Ambient intelligent systems (AISC). Bd. 483. Cham : Springer, 2016, S. 385–390","ieee":"D. A. Plewe and C. Röcker, “Aesthetic Intelligence for Effective and Pleasurable Design,” in Advances in Affective and Pleasurable Design, Walt Disney World®, Florida, USA, 2016, vol. 483, pp. 385–390.","apa":"Plewe, D. A., & Röcker, C. (2016). Aesthetic Intelligence for Effective and Pleasurable Design. In W. Chung & C. S. Shin (Eds.), Advances in Affective and Pleasurable Design (Vol. 483, pp. 385–390). Cham: Springer. https://doi.org/10.1007/978-3-319-41661-8_37","chicago":"Plewe, Daniela Alina, and Carsten Röcker. “Aesthetic Intelligence for Effective and Pleasurable Design.” In Advances in Affective and Pleasurable Design, edited by WonJoon Chung and Cliff Sungsoo Shin, 483:385–90. Aesthetic Intelligence Aesthetics Design Methodologies Ambient Intelligent Systems (AISC). Cham: Springer, 2016. https://doi.org/10.1007/978-3-319-41661-8_37.","ama":"Plewe DA, Röcker C. Aesthetic Intelligence for Effective and Pleasurable Design. In: Chung W, Shin CS, eds. Advances in Affective and Pleasurable Design. Vol 483. Aesthetic intelligence Aesthetics Design methodologies Ambient intelligent systems (AISC). Cham: Springer; 2016:385-390. doi:10.1007/978-3-319-41661-8_37","van":"Plewe DA, Röcker C. Aesthetic Intelligence for Effective and Pleasurable Design. In: Chung W, Shin CS, editors. Advances in Affective and Pleasurable Design. Cham: Springer; 2016. p. 385–90. (Aesthetic intelligence Aesthetics Design methodologies Ambient intelligent systems (AISC); vol. 483).","bjps":"Plewe DA and Röcker C (2016) Aesthetic Intelligence for Effective and Pleasurable Design. In Chung W and Shin CS (eds), Advances in Affective and Pleasurable Design, vol. 483. Cham: Springer, pp. 385–390.","mla":"Plewe, Daniela Alina, and Carsten Röcker. “Aesthetic Intelligence for Effective and Pleasurable Design.” Advances in Affective and Pleasurable Design, edited by WonJoon Chung and Cliff Sungsoo Shin, vol. 483, Springer, 2016, pp. 385–90, doi:10.1007/978-3-319-41661-8_37.","havard":"D.A. Plewe, C. Röcker, Aesthetic Intelligence for Effective and Pleasurable Design, in: W. Chung, C.S. Shin (Eds.), Advances in Affective and Pleasurable Design, Springer, Cham, 2016: pp. 385–390.","ufg":"Plewe, Daniela Alina/Röcker, Carsten (2016): Aesthetic Intelligence for Effective and Pleasurable Design, in: WonJoon Chung/Cliff Sungsoo Shin (Hgg.): Advances in Affective and Pleasurable Design (=Aesthetic intelligence Aesthetics Design methodologies Ambient intelligent systems (AISC) 483), Cham, S. 385–390."},"oa":"1","keyword":["Aesthetic intelligence","Aesthetics","Design methodologies","Ambient intelligent systems"],"language":[{"iso":"eng"}],"publication":"Advances in Affective and Pleasurable Design","publication_identifier":{"eisbn":["978-3-319-41661-8"],"isbn":["978-3-319-41660-1"]},"date_created":"2021-01-08T11:32:17Z","date_updated":"2023-03-15T13:49:52Z","editor":[{"last_name":"Chung","first_name":"WonJoon","full_name":"Chung, WonJoon"},{"full_name":"Shin, Cliff Sungsoo ","first_name":"Cliff Sungsoo ","last_name":"Shin"}]},{"has_accepted_license":"1","place":"Lemgo","_id":"584","type":"conference","user_id":"49010","conference":{"start_date":"2016-09-29","end_date":"2016-09-30","name":"Proceedings 6th International Conference","location":"Lemgo"},"department":[{"_id":"DEP7020"},{"_id":"DEP1306"},{"_id":"DEP1305"}],"ddc":["620"],"abstract":[{"lang":"eng","text":"Due to the continuing trend towards more complexity of products with an increasing number of variants and smaller lot sizes, the assembly often takes place -despite relatively high labor costs in Western industrialized nations -manually or partially automated. An outsourcing or relocation of assembly function abroad is not suitable in most cases.Therefore, it is increasingly important to reduce process variations and waste in manual assembly processes. Assistance systems have the potential, depending on the situation, to assist the worker in his work, to reduce error rate and to increase productivity. In a first part of the paper an overview will be given to different types of assembly assistance systems. Then a morphological chart is developed, which can provide assistance in selecting or comparing assembly assistance systems. With the help of this chart an assembly assistant system is presented. Finally a quick look is taken at further research being done in this area."}],"issue":"01","quality_controlled":"1","publication_status":"published","file":[{"relation":"main_file","creator":"mqc-p4h","date_updated":"2023-04-14T11:26:54Z","file_id":"9700","file_size":462853,"file_name":"PEM_2016_Hinrichsen Riediger Unrau.pdf","content_type":"application/pdf","date_created":"2023-04-14T11:26:54Z","access_level":"open_access","success":1}],"oa":"1","language":[{"iso":"eng"}],"keyword":["Assistance systems","Manual assembly","Morphology"],"date_created":"2019-02-18T14:30:50Z","publication":"Production Engineering and Management","publication_identifier":{"isbn":["978-3-946856-00-9"]},"date_updated":"2023-04-14T11:27:48Z","file_date_updated":"2023-04-14T11:26:54Z","editor":[{"last_name":"Villmer","full_name":"Villmer, Franz-Josef","first_name":"Franz-Josef"},{"last_name":"Padoano","first_name":"Elio","full_name":"Padoano, Elio"}],"corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"author":[{"first_name":"Sven","full_name":"Hinrichsen, Sven","last_name":"Hinrichsen","id":"49010"},{"first_name":"Daniel","last_name":"Riediger","id":"52263","full_name":"Riediger, Daniel"},{"last_name":"Unrau","full_name":"Unrau, Alexander","first_name":"Alexander","id":"64690"}],"year":"2016","page":"3-14","status":"public","title":"Assistance Systems in Manual Assembly","citation":{"chicago":"Hinrichsen, Sven, Daniel Riediger, and Alexander Unrau. “Assistance Systems in Manual Assembly.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, Department of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, 3–14. Lemgo, 2016.","apa":"Hinrichsen, S., Riediger, D., & Unrau, A. (2016). Assistance Systems in Manual Assembly. In F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management (Issue 01, pp. 3–14).","ufg":"Hinrichsen, Sven/Riediger, Daniel/Unrau, Alexander: Assistance Systems in Manual Assembly, in: Villmer, Franz-Josef u. a. (Hgg.): Production Engineering and Management, Lemgo 2016, S. 3–14.","bjps":"Hinrichsen S, Riediger D and Unrau A (2016) Assistance Systems in Manual Assembly. In Villmer F-J et al. (eds), Production Engineering and Management. Lemgo, pp. 3–14.","mla":"Hinrichsen, Sven, et al. “Assistance Systems in Manual Assembly.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 01, 2016, pp. 3–14.","havard":"S. Hinrichsen, D. Riediger, A. Unrau, Assistance Systems in Manual Assembly, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management, Lemgo, 2016: pp. 3–14.","van":"Hinrichsen S, Riediger D, Unrau A. Assistance Systems in Manual Assembly. In: Villmer FJ, Padoano E, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, editors. Production Engineering and Management. Lemgo; 2016. p. 3–14.","din1505-2-1":"Hinrichsen, Sven ; Riediger, Daniel ; Unrau, Alexander: Assistance Systems in Manual Assembly. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management ; Hochschule Ostwestfalen-Lippe (Hrsg.): Production Engineering and Management. Lemgo, 2016, S. 3–14","chicago-de":"Hinrichsen, Sven, Daniel Riediger und Alexander Unrau. 2016. Assistance Systems in Manual Assembly. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, Department of Production Engineering and Management, und Hochschule Ostwestfalen-Lippe, 3–14. Lemgo.","short":"S. Hinrichsen, D. Riediger, A. Unrau, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management, Lemgo, 2016, pp. 3–14.","ieee":"S. Hinrichsen, D. Riediger, and A. Unrau, “Assistance Systems in Manual Assembly,” in Production Engineering and Management, Lemgo, 2016, no. 01, pp. 3–14.","ama":"Hinrichsen S, Riediger D, Unrau A. Assistance Systems in Manual Assembly. In: Villmer FJ, Padoano E, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management. ; 2016:3-14."}},{"status":"public","year":2016,"main_file_link":[{"open_access":"1","url":"https://www.facadetectonics.org/index.php?p=actions/protectedlinks/link/get&code=61a806146cc381401fa140fd4efbec7f96313bab"}],"author":[{"first_name":"Daniel","id":"58805","full_name":"Arztmann, Daniel","last_name":"Arztmann"}],"citation":{"chicago-de":"Arztmann, Daniel. 2016. Shadow Boxes – Re-Engineered. In: Facade Tectonics : World Congress Los Angeles 2016 Conference Proceedings, hg. von Douglas Noble, Karen Kensek, Shreya Das, und Facade Tectonics Institute , 2:. Los Angeles : Tectonic Press.","din1505-2-1":"Arztmann, Daniel: Shadow Boxes – Re-Engineered. In: Noble, D. ; Kensek, K. ; Das, S. ; Facade Tectonics Institute (Hrsg.): Facade Tectonics : World Congress Los Angeles 2016 Conference Proceedings. Bd. 2. Los Angeles : Tectonic Press, 2016","short":"D. Arztmann, in: D. Noble, K. Kensek, S. Das, Facade Tectonics Institute (Eds.), Facade Tectonics : World Congress Los Angeles 2016 Conference Proceedings, Tectonic Press, Los Angeles , 2016.","ufg":"Arztmann, Daniel (2016): Shadow Boxes – Re-Engineered, in: Douglas Noble et. al. (Hgg.): Facade Tectonics : World Congress Los Angeles 2016 Conference Proceedings (= 2), Los Angeles .","mla":"Arztmann, Daniel. “Shadow Boxes – Re-Engineered.” Facade Tectonics : World Congress Los Angeles 2016 Conference Proceedings, edited by Douglas Noble et al., vol. 2, Tectonic Press, 2016.","havard":"D. Arztmann, Shadow Boxes – Re-Engineered, in: D. Noble, K. Kensek, S. Das, Facade Tectonics Institute (Eds.), Facade Tectonics : World Congress Los Angeles 2016 Conference Proceedings, Tectonic Press, Los Angeles , 2016.","bjps":"Arztmann D (2016) Shadow Boxes – Re-Engineered. In Noble D et al. (eds), Facade Tectonics : World Congress Los Angeles 2016 Conference Proceedings, vol. 2. Los Angeles : Tectonic Press.","van":"Arztmann D. Shadow Boxes – Re-Engineered. In: Noble D, Kensek K, Das S, Facade Tectonics Institute , editors. Facade Tectonics : World Congress Los Angeles 2016 Conference Proceedings. Los Angeles : Tectonic Press; 2016.","ama":"Arztmann D. Shadow Boxes – Re-Engineered. In: Noble D, Kensek K, Das S, Facade Tectonics Institute , eds. Facade Tectonics : World Congress Los Angeles 2016 Conference Proceedings. Vol 2. Los Angeles : Tectonic Press; 2016.","chicago":"Arztmann, Daniel. “Shadow Boxes – Re-Engineered.” In Facade Tectonics : World Congress Los Angeles 2016 Conference Proceedings, edited by Douglas Noble, Karen Kensek, Shreya Das, and Facade Tectonics Institute , Vol. 2. Los Angeles : Tectonic Press, 2016.","apa":"Arztmann, D. (2016). Shadow Boxes – Re-Engineered. In D. Noble, K. Kensek, S. Das, & Facade Tectonics Institute (Eds.), Facade Tectonics : World Congress Los Angeles 2016 Conference Proceedings (Vol. 2). Los Angeles : Tectonic Press.","ieee":"D. Arztmann, “Shadow Boxes – Re-Engineered,” in Facade Tectonics : World Congress Los Angeles 2016 Conference Proceedings, Los Angeles, 2016, vol. 2."},"volume":2,"title":"Shadow Boxes – Re-Engineered","keyword":["Curtain wall","energy efficiency","thermal break","condensation","physical testing","mockups"],"language":[{"iso":"eng"}],"oa":"1","corporate_editor":["Facade Tectonics Institute "],"editor":[{"first_name":"Douglas ","full_name":"Noble, Douglas ","last_name":"Noble"},{"first_name":"Karen ","last_name":"Kensek","full_name":"Kensek, Karen "},{"first_name":"Shreya ","last_name":"Das","full_name":"Das, Shreya "}],"date_updated":"2023-03-15T13:50:02Z","publication":"Facade Tectonics : World Congress Los Angeles 2016 Conference Proceedings","publication_identifier":{"isbn":["978-1-882352-43-2 "]},"date_created":"2021-05-07T10:46:56Z","publisher":"Tectonic Press","abstract":[{"text":"This paper provides information about an in-house research project for shadow box design. During this research project, several mockups with sensors for heat and relative humidity were produced and tested under two different laboratory conditions: one with artificial sunlight and one in an outdoor temperate climate. \r\nThe outdoor test provided information about temperature changes in the shadow box due to air infiltration and exfiltration. Further, it also provided information about the conservation of solar energy in the air cavity behind the spandrel glass and adjacent materials. Temperature sensors on the interior surfaces of the façade produced data that was used to draw conclusions about the heat flow from inside the shadow box to the interior ambient air via the façade profiles. It was also used to develop a two-dimensional simulation tool to show heat development and heat flow in the shadow box. \r\nThe test under laboratory conditions with artificial sunlight showed that the correct choice of glass type and color of the opaque back layer highly influences heat development in the shadow box cavity. The test results also illustrate that the size of ventilation openings and the depth of the air layer only slightly influence heat built-up in this cavity. \r\nThe shadow box is a very complex system that should be designed and manufactured so as not to have a detrimental effect on the thermal performance of the facade. To maintain precise and consistent reproduction and to improve the thermal performance, a new PVC shadow box profile was developed. PVC is a poor thermal conductor and, therefore, the heat flow from the shadow box construction into the interior becomes interrupted, consequently improving the heat transfer coefficients of the façade and the panel construction. Furthermore, the PVC profile has been designed as a four sided mitered and sealed frame insert to enable easy attachment of the opaque back layer, thus creating a weather tight assembly within the curtain wall day light opening. ","lang":"eng"}],"conference":{"start_date":"2016","end_date":"2016","location":"Los Angeles","name":"Facade Tectonics : World Congress Los Angeles 2016 Conference Proceedings"},"department":[{"_id":"DEP1034"}],"publication_status":"published","_id":"5853","place":"Los Angeles ","intvolume":" 2","user_id":"15514","type":"conference"},{"publisher":"De Gryter Oldenbourg","department":[{"_id":"DEP1305"}],"issue":"10","abstract":[{"lang":"eng","text":"In this paper, we analyze the specific requirements of interacting with cyber-physical systems and propose a design approach that is driven by user needs and makes use of an expanded toolbox that contains state-of-the-art interaction technologies including Smart Glasses and Wearables. We present several examples of assistance systems in industrial production that use these interaction technologies and discuss the corresponding usability and implementation aspects. "},{"lang":"ger","text":"Dieser Beitrag analysiert die speziellen Herausforderungen in der Interaktion mit Cyber-Physical Systems und stellen ein darauf abgestimmtes Entwurfsvorgehen vor. Der Ansatz kombiniert ein nutzerzentriertes Vorgehen mit einer Sammlung aktueller Interaktionstechnologien wie Smart Glasses und Wearables. An Einsatzbeispielen in der industriellen Produktion werden die mit diesen neuen Interaktionstechnologien verknüpften Implementierungs- und Usabilityaspekte diskutiert. "}],"publication_status":"published","place":"Oldenbourg","doi":"10.1515/auto-2015-0016","_id":"688","alternative_title":["Nutzerschnittstellen für Cyber-Physical Systems : Ein Werkzeugkasten für Designer und Entwickler"],"user_id":"45673","intvolume":" 63","type":"journal_article","page":"833-843","status":"public","year":2015,"main_file_link":[{"url":"https://www.degruyter.com/view/j/auto.2015.63.issue-10/auto-2015-0016/auto-2015-0016.xml"}],"author":[{"full_name":"Paelke, Volker ","last_name":"Paelke","first_name":"Volker "},{"last_name":"Röcker","first_name":"Carsten","id":"61525","full_name":"Röcker, Carsten"},{"full_name":"Koch, Nils","last_name":"Koch","first_name":"Nils"},{"full_name":"Flatt, Holger","last_name":"Flatt","id":"58494","first_name":"Holger"},{"first_name":"Sebastian","full_name":"Büttner, Sebastian","last_name":"Büttner","id":"61868"}],"volume":63,"citation":{"ama":"Paelke V, Röcker C, Koch N, Flatt H, Büttner S. User Interfaces for Cyber-Physical Systems : Expanding the Designer’s Toolbox. at - Automatisierungstechnik. 2015;63(10):833-843. doi:10.1515/auto-2015-0016","ieee":"V. Paelke, C. Röcker, N. Koch, H. Flatt, and S. Büttner, “User Interfaces for Cyber-Physical Systems : Expanding the Designer’s Toolbox,” at - Automatisierungstechnik, vol. 63, no. 10, pp. 833–843, 2015.","van":"Paelke V, Röcker C, Koch N, Flatt H, Büttner S. User Interfaces for Cyber-Physical Systems : Expanding the Designer’s Toolbox. at - Automatisierungstechnik. 2015;63(10):833–43.","bjps":"Paelke V et al. (2015) User Interfaces for Cyber-Physical Systems : Expanding the Designer’s Toolbox. at - Automatisierungstechnik 63, 833–843.","mla":"Paelke, Volker, et al. “User Interfaces for Cyber-Physical Systems : Expanding the Designer’s Toolbox.” At - Automatisierungstechnik, vol. 63, no. 10, De Gryter Oldenbourg, 2015, pp. 833–43, doi:10.1515/auto-2015-0016.","havard":"V. Paelke, C. Röcker, N. Koch, H. Flatt, S. Büttner, User Interfaces for Cyber-Physical Systems : Expanding the Designer’s Toolbox, At - Automatisierungstechnik. 63 (2015) 833–843.","ufg":"Paelke, Volker et. al. (2015): User Interfaces for Cyber-Physical Systems : Expanding the Designer’s Toolbox, in: at - Automatisierungstechnik 63 (10), S. 833–843.","apa":"Paelke, V., Röcker, C., Koch, N., Flatt, H., & Büttner, S. (2015). User Interfaces for Cyber-Physical Systems : Expanding the Designer’s Toolbox. At - Automatisierungstechnik, 63(10), 833–843. https://doi.org/10.1515/auto-2015-0016","chicago":"Paelke, Volker , Carsten Röcker, Nils Koch, Holger Flatt, and Sebastian Büttner. “User Interfaces for Cyber-Physical Systems : Expanding the Designer’s Toolbox.” At - Automatisierungstechnik 63, no. 10 (2015): 833–43. https://doi.org/10.1515/auto-2015-0016.","short":"V. Paelke, C. Röcker, N. Koch, H. Flatt, S. Büttner, At - Automatisierungstechnik 63 (2015) 833–843.","chicago-de":"Paelke, Volker , Carsten Röcker, Nils Koch, Holger Flatt und Sebastian Büttner. 2015. User Interfaces for Cyber-Physical Systems : Expanding the Designer’s Toolbox. at - Automatisierungstechnik 63, Nr. 10: 833–843. doi:10.1515/auto-2015-0016, .","din1505-2-1":"Paelke, Volker ; Röcker, Carsten ; Koch, Nils ; Flatt, Holger ; Büttner, Sebastian: User Interfaces for Cyber-Physical Systems : Expanding the Designer’s Toolbox. In: at - Automatisierungstechnik Bd. 63. Oldenbourg, De Gryter Oldenbourg (2015), Nr. 10, S. 833–843"},"title":"User Interfaces for Cyber-Physical Systems : Expanding the Designer’s Toolbox","language":[{"iso":"eng"}],"keyword":["User centred design","user interfaces","user expe-rience","cyber-physical systems","smart glasses","wearables"],"date_updated":"2023-03-15T13:50:08Z","date_created":"2019-03-07T14:53:12Z","publication_identifier":{"issn":["2196-677X"]},"publication":"at - Automatisierungstechnik"},{"title":"Towards distributed intelligent sensor and information fusion","citation":{"ama":"Mönks U, Trsek H, Dürkop L, Geneiß V, Lohweg V. Towards distributed intelligent sensor and information fusion. Mechatronics. 2015;(34):63-71. doi:10.1016/j.mechatronics.2015.05.005","van":"Mönks U, Trsek H, Dürkop L, Geneiß V, Lohweg V. Towards distributed intelligent sensor and information fusion. Mechatronics. 2015;(34):63–71.","havard":"U. Mönks, H. Trsek, L. Dürkop, V. Geneiß, V. Lohweg, Towards distributed intelligent sensor and information fusion, Mechatronics. (2015) 63–71.","mla":"Mönks, Uwe, et al. “Towards Distributed Intelligent Sensor and Information Fusion.” Mechatronics, no. 34, Elsevier, 2015, pp. 63–71, doi:10.1016/j.mechatronics.2015.05.005.","bjps":"Mönks U et al. (2015) Towards Distributed Intelligent Sensor and Information Fusion. Mechatronics 63–71.","ufg":"Mönks, Uwe et. al. (2015): Towards distributed intelligent sensor and information fusion, in: Mechatronics (34), S. 63–71.","ieee":"U. Mönks, H. Trsek, L. Dürkop, V. Geneiß, and V. Lohweg, “Towards distributed intelligent sensor and information fusion,” Mechatronics, no. 34, pp. 63–71, 2015.","apa":"Mönks, U., Trsek, H., Dürkop, L., Geneiß, V., & Lohweg, V. (2015). Towards distributed intelligent sensor and information fusion. Mechatronics, (34), 63–71. https://doi.org/10.1016/j.mechatronics.2015.05.005","chicago":"Mönks, Uwe, Henning Trsek, Lars Dürkop, Volker Geneiß, and Volker Lohweg. “Towards Distributed Intelligent Sensor and Information Fusion.” Mechatronics, no. 34 (2015): 63–71. https://doi.org/10.1016/j.mechatronics.2015.05.005.","short":"U. Mönks, H. Trsek, L. Dürkop, V. Geneiß, V. Lohweg, Mechatronics (2015) 63–71.","din1505-2-1":"Mönks, Uwe ; Trsek, Henning ; Dürkop, Lars ; Geneiß, Volker ; Lohweg, Volker: Towards distributed intelligent sensor and information fusion. In: Mechatronics, Elsevier (2015), Nr. 34, S. 63–71","chicago-de":"Mönks, Uwe, Henning Trsek, Lars Dürkop, Volker Geneiß und Volker Lohweg. 2015. Towards distributed intelligent sensor and information fusion. Mechatronics, Nr. 34: 63–71. doi:10.1016/j.mechatronics.2015.05.005, ."},"issue":"34","abstract":[{"text":"Recent industrial applications are implemented in a modular way, resulting in flexibility during the whole life cycle, i.e., setup, operation, and maintenance. This applies especially to larger applications like logistic, production, and printing processes. Their modular character is resulting from the constantly increasing complexity of such installations, which makes their supervision for securing reliable operation a difficult task: the data of hundreds (if not thousands) of signal sources must be acquired, communicated, and evaluated for system diagnosis. In this contribution we summarize the challenges arising in such applications and show that distributed sensor and information fusion for modular self-diagnosis tackles these challenges. Here, we propose an innovative distributed architecture encompassing intelligent sensor nodes, self-configuring real-time communication networks, and a suitable sensor and information fusion system for condition monitoring. New challenges arise in the context of distributed information fusion systems, which are identified and to which an outlook on future solutions is provided. A number of these solutions have already been discovered, implemented, and are evaluated in the context of a demonstrator, which resembles a real-world printing application.","lang":"eng"}],"department":[{"_id":"DEP5023"}],"year":2015,"author":[{"id":"1825","full_name":"Mönks, Uwe","first_name":"Uwe","last_name":"Mönks"},{"full_name":"Trsek, Henning","id":"1486","last_name":"Trsek","first_name":"Henning"},{"full_name":"Dürkop, Lars","first_name":"Lars","last_name":"Dürkop"},{"last_name":"Geneiß","first_name":"Volker","full_name":"Geneiß, Volker"},{"orcid":"0000-0002-3325-7887","last_name":"Lohweg","id":"1804","full_name":"Lohweg, Volker","first_name":"Volker"}],"main_file_link":[{"url":"https://www.sciencedirect.com/science/article/pii/S0957415815000707","open_access":"1"}],"publisher":"Elsevier","page":"63-71","status":"public","type":"journal_article","date_created":"2019-12-04T09:29:07Z","publication_identifier":{"issn":["0957-4158"]},"publication":"Mechatronics","date_updated":"2023-03-15T13:49:39Z","user_id":"68554","oa":"1","doi":"10.1016/j.mechatronics.2015.05.005","_id":"2140","language":[{"iso":"eng"}],"keyword":["Cyber-physical systems","Information fusion","Fusion system design","Intelligent sensors","Self-configuration","Intelligent networking"]},{"author":[{"last_name":"Niggemann","id":"10876","first_name":"Oliver","full_name":"Niggemann, Oliver"},{"orcid":"0000-0002-3325-7887","first_name":"Volker","full_name":"Lohweg, Volker","id":"1804","last_name":"Lohweg"}],"main_file_link":[{"url":"https://www.aaai.org/ocs/index.php/AAAI/AAAI15/paper/view/9530/9691","open_access":"1"}],"year":2015,"department":[{"_id":"DEP5023"}],"abstract":[{"text":"Cyber-Physical Production Systems (CPPSs) are in the focus of research, industry and politics: By applying new IT and new computer science solutions, production systems will become more adaptable, more resource ef- ficient and more user friendly. The analysis and diagnosis of such systems is a major part of this trend: Plants should detect automatically wear, faults and suboptimal configurations. This paper reflects the current state-of- the-art in diagnosis against the requirements of CPPSs, identifies three main gaps and gives application scenarios to outline first ideas for potential solutions to close these gaps.\r\n","lang":"eng"}],"status":"public","title":"On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda","citation":{"ieee":"O. Niggemann and V. Lohweg, “On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda,” in Twenty-Ninth Conference on Artificial Intelligence (AAAI-15), 2015.","ama":"Niggemann O, Lohweg V. On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda. In: Twenty-Ninth Conference on Artificial Intelligence (AAAI-15). Austin, Texas, USA; 2015.","chicago":"Niggemann, Oliver, and Volker Lohweg. “On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda.” In Twenty-Ninth Conference on Artificial Intelligence (AAAI-15). Austin, Texas, USA, 2015.","apa":"Niggemann, O., & Lohweg, V. (2015). On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda. In Twenty-Ninth Conference on Artificial Intelligence (AAAI-15). Austin, Texas, USA.","havard":"O. Niggemann, V. Lohweg, On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda, in: Twenty-Ninth Conference on Artificial Intelligence (AAAI-15), Austin, Texas, USA, 2015.","bjps":"Niggemann O and Lohweg V (2015) On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda. Twenty-Ninth Conference on Artificial Intelligence (AAAI-15). Austin, Texas, USA.","mla":"Niggemann, Oliver, and Volker Lohweg. “On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda.” Twenty-Ninth Conference on Artificial Intelligence (AAAI-15), 2015.","ufg":"Niggemann, Oliver/Lohweg, Volker (2015): On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda, in: Twenty-Ninth Conference on Artificial Intelligence (AAAI-15), Austin, Texas, USA.","van":"Niggemann O, Lohweg V. On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda. In: Twenty-Ninth Conference on Artificial Intelligence (AAAI-15). Austin, Texas, USA; 2015.","din1505-2-1":"Niggemann, Oliver ; Lohweg, Volker: On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda. In: Twenty-Ninth Conference on Artificial Intelligence (AAAI-15). Austin, Texas, USA, 2015","chicago-de":"Niggemann, Oliver und Volker Lohweg. 2015. On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda. In: Twenty-Ninth Conference on Artificial Intelligence (AAAI-15). Austin, Texas, USA.","short":"O. Niggemann, V. Lohweg, in: Twenty-Ninth Conference on Artificial Intelligence (AAAI-15), Austin, Texas, USA, 2015."},"oa":"1","keyword":["Cyber-Physical Systems","Machine Learning","Diagnosis","Anomaly Detection"],"place":"Austin, Texas, USA","language":[{"iso":"eng"}],"_id":"2167","publication":"Twenty-Ninth Conference on Artificial Intelligence (AAAI-15)","date_created":"2019-12-04T12:43:12Z","type":"conference","user_id":"68554","date_updated":"2023-03-15T13:49:39Z"},{"year":"2015","author":[{"last_name":"Paelke","full_name":"Paelke, Volker","first_name":"Volker"},{"full_name":"Röcker, Carsten","first_name":"Carsten","last_name":"Röcker","id":"61525"}],"status":"public","page":"75-85 ","title":"User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. ","volume":9186,"citation":{"ieee":"V. Paelke and C. Röcker, “User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. ,” in Design, User Experience, and Usability: Design Discourse, Los Angeles, CA, USA, 2015, vol. 9186, pp. 75–85. doi: 10.1007/978-3-319-20886-2_8.","ama":"Paelke V, Röcker C. User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. . In: Design, User Experience, and Usability: Design Discourse. Vol 9186. Lecture Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web, and HCI. Springer; 2015:75-85. doi:10.1007/978-3-319-20886-2_8","chicago-de":"Paelke, Volker und Carsten Röcker. 2015. User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. . In: Design, User Experience, and Usability: Design Discourse, 9186:75–85. Lecture Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web, and HCI. Cham: Springer. doi:10.1007/978-3-319-20886-2_8, .","din1505-2-1":"Paelke, Volker ; Röcker, Carsten: User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. . In: Design, User Experience, and Usability: Design Discourse, Lecture Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web, and HCI. Bd. 9186. Cham : Springer, 2015, S. 75–85","short":"V. Paelke, C. Röcker, in: Design, User Experience, and Usability: Design Discourse, Springer, Cham, 2015, pp. 75–85.","chicago":"Paelke, Volker, and Carsten Röcker. “User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. .” In Design, User Experience, and Usability: Design Discourse, 9186:75–85. Lecture Notes in Computer Science ; Information Systems and Applications, Incl. Internet/Web, and HCI. Cham: Springer, 2015. https://doi.org/10.1007/978-3-319-20886-2_8.","apa":"Paelke, V., & Röcker, C. (2015). User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. . Design, User Experience, and Usability: Design Discourse, 9186, 75–85. https://doi.org/10.1007/978-3-319-20886-2_8","ufg":"Paelke, Volker/Röcker, Carsten: User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. , in: o. Hg.: Design, User Experience, and Usability: Design Discourse, Bd. 9186, Cham 2015 (Lecture Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web, and HCI), S. 75–85.","mla":"Paelke, Volker, and Carsten Röcker. “User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. .” Design, User Experience, and Usability: Design Discourse, vol. 9186, Springer, 2015, pp. 75–85, https://doi.org/10.1007/978-3-319-20886-2_8.","bjps":"Paelke V and Röcker C (2015) User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. . Design, User Experience, and Usability: Design Discourse, vol. 9186. Cham: Springer, pp. 75–85.","havard":"V. Paelke, C. Röcker, User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. , in: Design, User Experience, and Usability: Design Discourse, Springer, Cham, 2015: pp. 75–85.","van":"Paelke V, Röcker C. User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. . In: Design, User Experience, and Usability: Design Discourse. Cham: Springer; 2015. p. 75–85. (Lecture Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web, and HCI; vol. 9186)."},"keyword":["Industrial IT","User-Centered design","Usability","User interfaces","Cyber-Physical-Systems","Industry 4.0","Augmented reality","Development processes and methods"],"language":[{"iso":"eng"}],"publication":"Design, User Experience, and Usability: Design Discourse","publication_identifier":{"eisbn":["978-3-319-20886-2"],"isbn":["978-3-319-20885-5"]},"date_created":"2021-01-08T12:03:44Z","date_updated":"2025-04-11T09:03:04Z","abstract":[{"text":"Catchwords such as “Cyber-Physical-Systems” and “Industry 4.0” describe the current development of systems with embedded intelligence. These systems can be characterized by an increasing technical complexity that must be addressed in the user interface. In this paper we analyze the specific requirements posed by the interaction with cyber-physical-systems, present a coordinated approach to these requirements and illustrate our approach with a practical example of an assistance system for assembly workers in an industrial production environment.","lang":"eng"}],"department":[{"_id":"DEP5023"}],"conference":{"location":"Los Angeles, CA, USA","name":"4th International Conference, DUXU 2015, Held as Part of HCI International 2015","start_date":"2015-08-02","end_date":"2015-08-07"},"publisher":"Springer","series_title":"Lecture Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web, and HCI","publication_status":"published","_id":"4330","doi":"10.1007/978-3-319-20886-2_8","place":"Cham","type":"conference","intvolume":" 9186","user_id":"83781"},{"publication_status":"published","series_title":"Lecture Notes in Computer Science","publisher":"Springer","department":[{"_id":"DEP5023"}],"abstract":[{"lang":"eng","text":"Our goal is to develop a system for coaching human motions (e.g., for rehabilitation and daily health maintenance). This paper focuses on how to coach a user so that his/her motion gets closer to the good template of a target motion. It is important to efficiently advise the user to emulate the crucial features that define the good template. The proposed system (1) automatically mines the crucial features of any kind of motion from a set of motion features and (2) gives the user feedback about how to modify the motion through an intuitive interface. The crucial features are mined by feature sparsification through binary classification between the samples of good and other motions. An interface for motion coaching is designed to give feedback via different channels (e.g., visually, aurally), depending on the type of error. To use the total system, all the user must do is just move and then get feedback on the motion. Following experimental results, open problems for future work are discussed."}],"user_id":"15514","intvolume":" 8700","type":"book_chapter","place":"Heidelberg","doi":"10.1007/978-3-319-16226-3_8","_id":"4337","volume":8700,"citation":{"van":"Ukita N, Kaulen D, Röcker C. A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health. In: Holzinger A, Röcker C, Ziefle M, editors. Smart Health : Open Problems and Future Challenges. Heidelberg: Springer; 2015. p. 189–208. (Lecture Notes in Computer Science; vol. 8700).","ama":"Ukita N, Kaulen D, Röcker C. A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health. In: Holzinger A, Röcker C, Ziefle M, eds. Smart Health : Open Problems and Future Challenges. Vol 8700. Lecture Notes in Computer Science. Heidelberg: Springer; 2015:189-208. doi:10.1007/978-3-319-16226-3_8","ufg":"Ukita, Norimichi et. al. (2015): A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health, in: Andreas Holzinger et. al. (Hgg.): Smart Health : Open Problems and Future Challenges (=Lecture Notes in Computer Science 8700), Heidelberg, S. 189–208.","mla":"Ukita, Norimichi, et al. “A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health.” Smart Health : Open Problems and Future Challenges, edited by Andreas Holzinger et al., vol. 8700, Springer, 2015, pp. 189–208, doi:10.1007/978-3-319-16226-3_8.","havard":"N. Ukita, D. Kaulen, C. Röcker, A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health, in: A. Holzinger, C. Röcker, M. Ziefle (Eds.), Smart Health : Open Problems and Future Challenges, Springer, Heidelberg, 2015: pp. 189–208.","bjps":"Ukita N, Kaulen D and Röcker C (2015) A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health. In Holzinger A, Röcker C and Ziefle M (eds), Smart Health : Open Problems and Future Challenges, vol. 8700. Heidelberg: Springer, pp. 189–208.","apa":"Ukita, N., Kaulen, D., & Röcker, C. (2015). A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health. In A. Holzinger, C. Röcker, & M. Ziefle (Eds.), Smart Health : Open Problems and Future Challenges (Vol. 8700, pp. 189–208). Heidelberg: Springer. https://doi.org/10.1007/978-3-319-16226-3_8","ieee":"N. Ukita, D. Kaulen, and C. Röcker, “A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health,” in Smart Health : Open Problems and Future Challenges, vol. 8700, A. Holzinger, C. Röcker, and M. Ziefle, Eds. Heidelberg: Springer, 2015, pp. 189–208.","chicago":"Ukita, Norimichi, Daniel Kaulen, and Carsten Röcker. “A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health.” In Smart Health : Open Problems and Future Challenges, edited by Andreas Holzinger, Carsten Röcker, and Martina Ziefle, 8700:189–208. Lecture Notes in Computer Science. Heidelberg: Springer, 2015. https://doi.org/10.1007/978-3-319-16226-3_8.","short":"N. Ukita, D. Kaulen, C. Röcker, in: A. Holzinger, C. Röcker, M. Ziefle (Eds.), Smart Health : Open Problems and Future Challenges, Springer, Heidelberg, 2015, pp. 189–208.","chicago-de":"Ukita, Norimichi, Daniel Kaulen und Carsten Röcker. 2015. A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health. In: Smart Health : Open Problems and Future Challenges, hg. von Andreas Holzinger, Carsten Röcker, und Martina Ziefle, 8700:189–208. Lecture Notes in Computer Science. Heidelberg: Springer. doi:10.1007/978-3-319-16226-3_8, .","din1505-2-1":"Ukita, Norimichi ; Kaulen, Daniel ; Röcker, Carsten: A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health. In: Holzinger, A. ; Röcker, C. ; Ziefle, M. (Hrsg.): Smart Health : Open Problems and Future Challenges, Lecture Notes in Computer Science. Bd. 8700. Heidelberg : Springer, 2015, S. 189–208"},"title":"A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health","page":" 189 - 208","status":"public","year":2015,"main_file_link":[{"open_access":"1"}],"author":[{"last_name":"Ukita","full_name":"Ukita, Norimichi","first_name":"Norimichi"},{"first_name":"Daniel ","last_name":"Kaulen","full_name":"Kaulen, Daniel "},{"first_name":"Carsten","full_name":"Röcker, Carsten","id":"61525","last_name":"Röcker"}],"date_updated":"2023-03-15T13:49:52Z","editor":[{"full_name":"Holzinger, Andreas","first_name":"Andreas","last_name":"Holzinger"},{"full_name":"Röcker, Carsten","id":"61525","last_name":"Röcker","first_name":"Carsten"},{"full_name":"Ziefle, Martina","first_name":"Martina","last_name":"Ziefle"}],"date_created":"2021-01-08T12:03:53Z","publication":"Smart Health : Open Problems and Future Challenges","publication_identifier":{"eisbn":["978-3-319-16226-3"],"isbn":["978-3-319-16225-6"]},"language":[{"iso":"eng"}],"keyword":["Motion coaching","Error feedback","Physical rehabilitation"],"oa":"1"},{"date_created":"2019-12-04T09:30:15Z","type":"conference","publication":"18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)","publication_identifier":{"isbn":["978-1-4799-0862-2"],"eissn":["1946-0759 "],"eisbn":["978-1-4799-0864-6"],"issn":["1946-0740 "]},"date_updated":"2023-03-15T13:49:39Z","user_id":"45673","corporate_editor":["IEEE"],"language":[{"iso":"eng"}],"keyword":["Decision making","Robot sensing systems","Reliability","Production","Context","Fuzzy set theory","Data integration"],"place":"Cagliari, Italy","doi":"10.1109/ETFA.2013.6647984","_id":"2141","title":"Machine Conditioning by Importance Controlled Information Fusion","publication_status":"published","citation":{"din1505-2-1":"Mönks, Uwe ; Lohweg, Volker: Machine Conditioning by Importance Controlled Information Fusion. In: IEEE (Hrsg.): 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy, 2013","chicago-de":"Mönks, Uwe und Volker Lohweg. 2013. Machine Conditioning by Importance Controlled Information Fusion. In: 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), hg. von IEEE. Cagliari, Italy. doi:10.1109/ETFA.2013.6647984, .","short":"U. Mönks, V. Lohweg, in: IEEE (Ed.), 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Cagliari, Italy, 2013.","chicago":"Mönks, Uwe, and Volker Lohweg. “Machine Conditioning by Importance Controlled Information Fusion.” In 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), edited by IEEE. Cagliari, Italy, 2013. https://doi.org/10.1109/ETFA.2013.6647984.","apa":"Mönks, U., & Lohweg, V. (2013). Machine Conditioning by Importance Controlled Information Fusion. In IEEE (Ed.), 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy. https://doi.org/10.1109/ETFA.2013.6647984","ufg":"Mönks, Uwe/Lohweg, Volker (2013): Machine Conditioning by Importance Controlled Information Fusion, in: IEEE (Hg.): 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Cagliari, Italy.","mla":"Mönks, Uwe, and Volker Lohweg. “Machine Conditioning by Importance Controlled Information Fusion.” 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), edited by IEEE, 2013, doi:10.1109/ETFA.2013.6647984.","bjps":"Mönks U and Lohweg V (2013) Machine Conditioning by Importance Controlled Information Fusion. In IEEE (ed.), 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy.","havard":"U. Mönks, V. Lohweg, Machine Conditioning by Importance Controlled Information Fusion, in: IEEE (Ed.), 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Cagliari, Italy, 2013.","van":"Mönks U, Lohweg V. Machine Conditioning by Importance Controlled Information Fusion. In: IEEE, editor. 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy; 2013.","ieee":"U. Mönks and V. Lohweg, “Machine Conditioning by Importance Controlled Information Fusion,” in 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2013.","ama":"Mönks U, Lohweg V. Machine Conditioning by Importance Controlled Information Fusion. In: IEEE, ed. 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy; 2013. doi:10.1109/ETFA.2013.6647984"},"department":[{"_id":"DEP5023"}],"year":2013,"author":[{"first_name":"Uwe","id":"1825","last_name":"Mönks","full_name":"Mönks, Uwe"},{"orcid":"0000-0002-3325-7887","full_name":"Lohweg, Volker","id":"1804","first_name":"Volker","last_name":"Lohweg"}],"abstract":[{"lang":"eng","text":"Sensor and information fusion is recently a major topic which becomes important in machine diagnosis and conditioning for complex production machines and process engineering. It is a known fact that distributed automation systems have a major impact on signal processing and pattern recognition for machine diagnosis. Therefore, it is necessary to research and develop smart diagnosis methods which are applicable for distributed systems like resource-limited cyber-physical systems. In this paper we propose an new approach for sensor and information fusion based on Evidence Theory and socio-psychological decision-making. We show that context based condition monitoring is instantiated even in conflict situations, oc-curing in real life scenarios permanently. A simple but effective importance measure is proposed which controls the significance of conditioning propositions in a system."}],"status":"public"},{"place":"Totowa, NJ","_id":"2394","doi":"10.1007/978-1-62703-733-4_22","user_id":"74004","intvolume":" 1104","type":"book_chapter","publisher":"Humana Press","department":[{"_id":"DEP4021"}],"abstract":[{"lang":"eng","text":"For the production of biopharmaceuticals a seed train is required to generate an adequate number of cells for inoculation of the production bioreactor. This seed train is time- and cost-intensive but offers potential for optimization. A method and a protocol are described for the seed train mapping, directed modeling without major effort, and its optimization regarding selected optimization criteria such as optimal points in time for cell passaging. Furthermore, the method can also be applied for the set-up of a new seed train, for example for a new cell line. Although the chapter is directed towards suspension cell lines, the method is also generally applicable, e.g. for adherent cell lines."}],"publication_status":"published","series_title":"Methods in Molecular Biology ","keyword":["Seed train Optimization Modeling Prediction Space-Time-Yield (STY) Systems approach Bioinformatics Computational biotechnology Suspension Production"],"language":[{"iso":"eng"}],"date_updated":"2023-03-15T13:49:39Z","publication":"Animal Cell Biotechnology","publication_identifier":{"isbn":["9781627037327"],"eisbn":["9781627037334"],"issn":["1064-3745","1940-6029"]},"date_created":"2020-05-19T14:45:43Z","status":"public","page":"355-367","year":2013,"author":[{"full_name":"Frahm, Björn","first_name":"Björn","last_name":"Frahm"}],"citation":{"ama":"Frahm B. Seed Train Optimization for Cell Culture. In: Animal Cell Biotechnology. Vol 1104. Methods in Molecular Biology . Totowa, NJ: Humana Press; 2013:355-367. doi:10.1007/978-1-62703-733-4_22","ieee":"B. Frahm, “Seed Train Optimization for Cell Culture,” in Animal Cell Biotechnology, vol. 1104, Totowa, NJ: Humana Press, 2013, pp. 355–367.","short":"B. Frahm, in: Animal Cell Biotechnology, Humana Press, Totowa, NJ, 2013, pp. 355–367.","chicago-de":"Frahm, Björn. 2013. Seed Train Optimization for Cell Culture. In: Animal Cell Biotechnology, 1104:355–367. Methods in Molecular Biology . Totowa, NJ: Humana Press. doi:10.1007/978-1-62703-733-4_22, .","din1505-2-1":"Frahm, Björn: Seed Train Optimization for Cell Culture. In: Animal Cell Biotechnology, Methods in Molecular Biology . Bd. 1104. Totowa, NJ : Humana Press, 2013, S. 355–367","van":"Frahm B. Seed Train Optimization for Cell Culture. In: Animal Cell Biotechnology. Totowa, NJ: Humana Press; 2013. p. 355–67. (Methods in Molecular Biology ; vol. 1104).","mla":"Frahm, Björn. “Seed Train Optimization for Cell Culture.” Animal Cell Biotechnology, vol. 1104, Humana Press, 2013, pp. 355–67, doi:10.1007/978-1-62703-733-4_22.","bjps":"Frahm B (2013) Seed Train Optimization for Cell Culture. Animal Cell Biotechnology, vol. 1104. Totowa, NJ: Humana Press, pp. 355–367.","havard":"B. Frahm, Seed Train Optimization for Cell Culture, in: Animal Cell Biotechnology, Humana Press, Totowa, NJ, 2013: pp. 355–367.","ufg":"Frahm, Björn (2013): Seed Train Optimization for Cell Culture, in: Animal Cell Biotechnology (=Methods in Molecular Biology 1104), Totowa, NJ, S. 355–367.","apa":"Frahm, B. (2013). Seed Train Optimization for Cell Culture. In Animal Cell Biotechnology (Vol. 1104, pp. 355–367). Totowa, NJ: Humana Press. https://doi.org/10.1007/978-1-62703-733-4_22","chicago":"Frahm, Björn. “Seed Train Optimization for Cell Culture.” In Animal Cell Biotechnology, 1104:355–67. Methods in Molecular Biology . Totowa, NJ: Humana Press, 2013. https://doi.org/10.1007/978-1-62703-733-4_22."},"volume":1104,"title":"Seed Train Optimization for Cell Culture"},{"publisher":"Humana Press","abstract":[{"text":"For the production of biopharmaceuticals a seed train is required to generate an adequate number of cells for inoculation of the production bioreactor. This seed train is time- and cost-intensive but offers potential for optimization. A method and a protocol are described for the seed train mapping, directed modeling without major effort, and its optimization regarding selected optimization criteria such as optimal points in time for cell passaging. Furthermore, the method can also be applied for the set-up of a new seed train, for example for a new cell line. Although the chapter is directed towards suspension cell lines, the method is also generally applicable, e.g. for adherent cell lines.","lang":"eng"}],"department":[{"_id":"DEP4000"}],"publication_status":"published","series_title":"Methods in Molecular Biology","doi":"10.1007/978-1-62703-733-4_22","_id":"10214","place":"Totowa, NJ","intvolume":" 1104","user_id":"83781","type":"book_chapter","page":"355–367","status":"public","year":"2013","author":[{"full_name":"Frahm, Björn","first_name":"Björn","id":"45666","last_name":"Frahm"}],"citation":{"bjps":"Frahm B (2013) Seed Train Optimization for Cell Culture. In Pörtner R (ed.), Animal Cell Biotechnology - Methods and Protocols, 3rd ed., vol. 1104. Totowa, NJ: Humana Press, pp. 355–367.","havard":"B. Frahm, Seed Train Optimization for Cell Culture, in: R. Pörtner (Ed.), Animal Cell Biotechnology - Methods and Protocols, 3rd ed., Humana Press, Totowa, NJ, 2013: pp. 355–367.","mla":"Frahm, Björn. “Seed Train Optimization for Cell Culture.” Animal Cell Biotechnology - Methods and Protocols, edited by Ralf Pörtner, 3rd ed., vol. 1104, Humana Press, 2013, pp. 355–67, https://doi.org/10.1007/978-1-62703-733-4_22.","ufg":"Frahm, Björn: Seed Train Optimization for Cell Culture, in: Pörtner, Ralf (Hg.): Animal Cell Biotechnology - Methods and Protocols, Bd. 1104, Totowa, NJ 32013 (Methods in Molecular Biology), S. 355–367.","van":"Frahm B. Seed Train Optimization for Cell Culture. In: Pörtner R, editor. Animal Cell Biotechnology - Methods and Protocols. 3rd ed. Totowa, NJ: Humana Press; 2013. p. 355–67. (Methods in Molecular Biology; vol. 1104).","chicago":"Frahm, Björn. “Seed Train Optimization for Cell Culture.” In Animal Cell Biotechnology - Methods and Protocols, edited by Ralf Pörtner, 3rd ed., 1104:355–67. Methods in Molecular Biology. Totowa, NJ: Humana Press, 2013. https://doi.org/10.1007/978-1-62703-733-4_22.","apa":"Frahm, B. (2013). Seed Train Optimization for Cell Culture. In R. Pörtner (Ed.), Animal Cell Biotechnology - Methods and Protocols (3rd ed., Vol. 1104, pp. 355–367). Humana Press. https://doi.org/10.1007/978-1-62703-733-4_22","din1505-2-1":"Frahm, Björn: Seed Train Optimization for Cell Culture. In: Pörtner, R. (Hrsg.): Animal Cell Biotechnology - Methods and Protocols, Methods in Molecular Biology. Bd. 1104. 3. Aufl. Totowa, NJ : Humana Press, 2013, S. 355–367","chicago-de":"Frahm, Björn. 2013. Seed Train Optimization for Cell Culture. In: Animal Cell Biotechnology - Methods and Protocols, hg. von Ralf Pörtner, 1104:355–367. 3. Aufl. Methods in Molecular Biology. Totowa, NJ: Humana Press. doi:10.1007/978-1-62703-733-4_22, .","short":"B. Frahm, in: R. Pörtner (Ed.), Animal Cell Biotechnology - Methods and Protocols, 3rd ed., Humana Press, Totowa, NJ, 2013, pp. 355–367.","ama":"Frahm B. Seed Train Optimization for Cell Culture. In: Pörtner R, ed. Animal Cell Biotechnology - Methods and Protocols. Vol 1104. 3rd ed. Methods in Molecular Biology. Humana Press; 2013:355-367. doi:10.1007/978-1-62703-733-4_22","ieee":"B. Frahm, “Seed Train Optimization for Cell Culture,” in Animal Cell Biotechnology - Methods and Protocols, 3rd ed., vol. 1104, R. Pörtner, Ed. Totowa, NJ: Humana Press, 2013, pp. 355–367. doi: 10.1007/978-1-62703-733-4_22."},"volume":1104,"title":"Seed Train Optimization for Cell Culture","language":[{"iso":"eng"}],"keyword":["Seed train","Optimization","Modeling","Prediction","Space-Time-Yield (STY)","Systems approach","Bioinformatics","Computational biotechnology","Suspension","Production"],"editor":[{"full_name":"Pörtner, Ralf","last_name":"Pörtner","first_name":"Ralf"}],"date_updated":"2023-08-16T06:41:21Z","edition":"3","date_created":"2023-08-14T17:50:56Z","publication":"Animal Cell Biotechnology - Methods and Protocols","publication_identifier":{"isbn":["978-1-62703-732-7"],"eissn":["1940-6029"],"issn":["1064-3745"],"eisbn":["978-1-62703-733-4"]}},{"_id":"2102","keyword":["Sensor- und Informationsfusion","elektrischer Antrieb","Cyber-Physical System","Industrie 4.0","Big Data"],"language":[{"iso":"ger"}],"type":"conference","date_created":"2019-12-02T14:32:58Z","user_id":"45673","date_updated":"2023-03-15T13:49:38Z","abstract":[{"lang":"ger","text":"Die Zustandsüberwachung erfolgt derzeit in der Regel durch Einsatz spezieller Sensorik, bspw. durch Vibrationsmessungen. Außerdem werden die Antriebe lediglich isoliert betrachtet, eine Zusammenführung anfallender Informationen eines räumlich verteilten Antriebsverbunds findet meist nicht statt. Im Folgenden wird ein neuartiges Motor-as-Sensor-Konzept vorgeschlagen und validiert, das eine antizipatorische Zustandsüberwachung ohne Einsatz zusätzlicher Sensorik allein durch Verarbeitung der phasenbezogenen Motorströme ermöglicht. Zusätzlich wird ein Informationsfusionskonzept vorge-stellt, das die Informationen aller im Verbund beteiligten Antriebe zusammenführt, um darüber eine mit weniger Unsicherheiten behaftete Aussage über den Zustand einer Ap-plikation herbeizuführen. Das Hauptaugenmerk liegt hierbei insbesondere auf der Beherrschung der anfallenden riesigen Datenmengen, die zur Verarbeitung in eingebetteten Systemen reduziert werden müssen."}],"year":2011,"author":[{"first_name":"Karl","last_name":"Voth","full_name":"Voth, Karl"},{"id":"1853","full_name":"Dicks, Alexander","last_name":"Dicks","first_name":"Alexander"},{"first_name":"Volker","id":"1804","last_name":"Lohweg","full_name":"Lohweg, Volker","orcid":"0000-0002-3325-7887"}],"department":[{"_id":"DEP5023"}],"status":"public","title":"Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund","citation":{"havard":"K. Voth, A. Dicks, V. Lohweg, Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund, in: 2011.","mla":"Voth, Karl, et al. Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund. 2011.","bjps":"Voth K, Dicks A and Lohweg V (2011) Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund.","ufg":"Voth, Karl et. al. (2011): Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund, in: .","ama":"Voth K, Dicks A, Lohweg V. Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund. In: ; 2011.","van":"Voth K, Dicks A, Lohweg V. Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund. In 2011.","chicago":"Voth, Karl, Alexander Dicks, and Volker Lohweg. “Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund,” 2011.","ieee":"K. Voth, A. Dicks, and V. Lohweg, “Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund,” 2011.","apa":"Voth, K., Dicks, A., & Lohweg, V. (2011). Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund.","din1505-2-1":"Voth, Karl ; Dicks, Alexander ; Lohweg, Volker: Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund. In: , 2011","chicago-de":"Voth, Karl, Alexander Dicks und Volker Lohweg. 2011. Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund. In: .","short":"K. Voth, A. Dicks, V. Lohweg, in: 2011."},"publication_status":"published"},{"date_updated":"2023-07-28T13:23:19Z","user_id":"83781","type":"conference_editor_article","date_created":"2022-05-17T14:05:13Z","publication":" 2009 6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops","publication_identifier":{"isbn":["978-1-4244-3938-6"]},"doi":"10.1109/SAHCNW.2009.5172916","_id":"8274","language":[{"iso":"eng"}],"keyword":["Cognitive radio","Quality of service","Space technology","Frequency","Production facilities","Chromium","Manufacturing automation","Intelligent systems","Polarization","Testing"],"place":"Piscataway, NJ","publication_status":"published","citation":{"short":"K. Ahmad, U. Meier, A. Pape, H. Kwasnicka, B. Griese, A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems, IEEE , Piscataway, NJ, 2009.","chicago-de":"Ahmad, Kaleem, Uwe Meier, Andreas Pape, Halina Kwasnicka und Bjoern Griese. 2009. A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems. 2009 6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops. Piscataway, NJ: IEEE . doi:10.1109/SAHCNW.2009.5172916, .","din1505-2-1":"Ahmad, Kaleem ; Meier, Uwe ; Pape, Andreas ; Kwasnicka, Halina ; Griese, Bjoern: A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems. Piscataway, NJ : IEEE , 2009","apa":"Ahmad, K., Meier, U., Pape, A., Kwasnicka, H., & Griese, B. (2009). A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems. In 2009 6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops. 6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops, Rome, Italy . IEEE . https://doi.org/10.1109/SAHCNW.2009.5172916","chicago":"Ahmad, Kaleem, Uwe Meier, Andreas Pape, Halina Kwasnicka, and Bjoern Griese. A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems. 2009 6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops. Piscataway, NJ: IEEE , 2009. https://doi.org/10.1109/SAHCNW.2009.5172916.","van":"Ahmad K, Meier U, Pape A, Kwasnicka H, Griese B. A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems. 2009 6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops. Piscataway, NJ: IEEE ; 2009.","ufg":"Ahmad, Kaleem u. a.: A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems, Piscataway, NJ 2009.","bjps":"Ahmad K et al. (2009) A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems. Piscataway, NJ: IEEE .","mla":"Ahmad, Kaleem, et al. “A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems.” 2009 6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops, IEEE , 2009, https://doi.org/10.1109/SAHCNW.2009.5172916.","havard":"K. Ahmad, U. Meier, A. Pape, H. Kwasnicka, B. Griese, A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems, IEEE , Piscataway, NJ, 2009.","ieee":"K. Ahmad, U. Meier, A. Pape, H. Kwasnicka, and B. Griese, A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems. Piscataway, NJ: IEEE , 2009. doi: 10.1109/SAHCNW.2009.5172916.","ama":"Ahmad K, Meier U, Pape A, Kwasnicka H, Griese B. A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems. IEEE ; 2009. doi:10.1109/SAHCNW.2009.5172916"},"title":"A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems","publisher":"IEEE ","status":"public","abstract":[{"text":"The need for multiple radio systems in overlapping regions of a factory plant introduces a coexistence problem. The current research challenge is to design and realize radio systems that should be able to achieve a desired quality of service (QoS) in this coexisting environment. Currently transmission resources of hyperspace are not properly exploited. The cognitive radio (CR), which can adapt to the environmental changes by reconfiguring itself, can be used to implement intelligent radio systems to exploit the orthogonal nature of multiple dimensions of hyperspace to maintain the desired QoS in coexisting factory environments. We present initial results of a coexistence optimized CR which can exploit frequency and power, which are two of several dimensions of hyperspace, to improve its QoS in coexisting environments.","lang":"eng"}],"department":[{"_id":"DEP5000"},{"_id":"DEP5014"}],"conference":{"end_date":"2009-06-26","start_date":"2009-06-22","name":"6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops","location":"Rome, Italy "},"year":"2009","author":[{"full_name":"Ahmad, Kaleem","first_name":"Kaleem","last_name":"Ahmad"},{"full_name":"Meier, Uwe","id":"1143","first_name":"Uwe","last_name":"Meier"},{"last_name":"Pape","first_name":"Andreas","full_name":"Pape, Andreas"},{"first_name":"Halina","full_name":"Kwasnicka, Halina","last_name":"Kwasnicka"},{"first_name":"Bjoern","full_name":"Griese, Bjoern","last_name":"Griese"}]},{"date_created":"2021-01-29T10:05:33Z","publication_identifier":{"isbn":["978-3-540-73278-5"],"eisbn":["978-3-540-73279-2"]},"publication":"Universal Acess in Human Computer Interaction : Coping with Diversity","editor":[{"first_name":"Constantine","last_name":"Stephanidis","full_name":"Stephanidis, Constantine"}],"date_updated":"2025-04-11T09:00:27Z","language":[{"iso":"eng"}],"keyword":["Privacy","Interruptions","Team Awareness Systems","Dual Trade-Off : Evaluation"],"extern":"1","title":"Privacy and Interruptions in Team Awareness Systems","citation":{"short":"C. Röcker, C. Magerkurth, in: C. Stephanidis (Ed.), Universal Acess in Human Computer Interaction : Coping with Diversity, Springer, Berlin, 2007, pp. 273–283.","din1505-2-1":"Röcker, Carsten ; Magerkurth, Carsten: Privacy and Interruptions in Team Awareness Systems. In: Stephanidis, C. (Hrsg.): Universal Acess in Human Computer Interaction : Coping with Diversity, Lecture Notes in Computer Science. Bd. 4554. Berlin : Springer, 2007, S. 273–283","chicago-de":"Röcker, Carsten und Carsten Magerkurth. 2007. Privacy and Interruptions in Team Awareness Systems. In: Universal Acess in Human Computer Interaction : Coping with Diversity, hg. von Constantine Stephanidis, 4554:273–283. Lecture Notes in Computer Science. Berlin: Springer. doi:10.1007/978-3-540-73279-2_31, .","apa":"Röcker, C., & Magerkurth, C. (2007). Privacy and Interruptions in Team Awareness Systems. In C. Stephanidis (Ed.), Universal Acess in Human Computer Interaction : Coping with Diversity (Vol. 4554, pp. 273–283). Springer. https://doi.org/10.1007/978-3-540-73279-2_31","chicago":"Röcker, Carsten, and Carsten Magerkurth. “Privacy and Interruptions in Team Awareness Systems.” In Universal Acess in Human Computer Interaction : Coping with Diversity, edited by Constantine Stephanidis, 4554:273–83. Lecture Notes in Computer Science. Berlin: Springer, 2007. https://doi.org/10.1007/978-3-540-73279-2_31.","van":"Röcker C, Magerkurth C. Privacy and Interruptions in Team Awareness Systems. In: Stephanidis C, editor. Universal Acess in Human Computer Interaction : Coping with Diversity. Berlin: Springer; 2007. p. 273–83. (Lecture Notes in Computer Science; vol. 4554).","ufg":"Röcker, Carsten/Magerkurth, Carsten: Privacy and Interruptions in Team Awareness Systems, in: Stephanidis, Constantine (Hg.): Universal Acess in Human Computer Interaction : Coping with Diversity, Bd. 4554, Berlin 2007 (Lecture Notes in Computer Science), S. 273–283.","bjps":"Röcker C and Magerkurth C (2007) Privacy and Interruptions in Team Awareness Systems. In Stephanidis C (ed.), Universal Acess in Human Computer Interaction : Coping with Diversity, vol. 4554. Berlin: Springer, pp. 273–283.","havard":"C. Röcker, C. Magerkurth, Privacy and Interruptions in Team Awareness Systems, in: C. Stephanidis (Ed.), Universal Acess in Human Computer Interaction : Coping with Diversity, Springer, Berlin, 2007: pp. 273–283.","mla":"Röcker, Carsten, and Carsten Magerkurth. “Privacy and Interruptions in Team Awareness Systems.” Universal Acess in Human Computer Interaction : Coping with Diversity, edited by Constantine Stephanidis, vol. 4554, Springer, 2007, pp. 273–83, https://doi.org/10.1007/978-3-540-73279-2_31.","ieee":"C. Röcker and C. Magerkurth, “Privacy and Interruptions in Team Awareness Systems,” in Universal Acess in Human Computer Interaction : Coping with Diversity, Beijing, China, 2007, vol. 4554, pp. 273–283. doi: 10.1007/978-3-540-73279-2_31.","ama":"Röcker C, Magerkurth C. Privacy and Interruptions in Team Awareness Systems. In: Stephanidis C, ed. Universal Acess in Human Computer Interaction : Coping with Diversity. Vol 4554. Lecture Notes in Computer Science. Springer; 2007:273-283. doi:10.1007/978-3-540-73279-2_31"},"volume":4554,"year":"2007","author":[{"id":"61525","last_name":"Röcker","full_name":"Röcker, Carsten","first_name":"Carsten"},{"first_name":"Carsten","full_name":"Magerkurth, Carsten","last_name":"Magerkurth"}],"page":"273-283","status":"public","type":"conference","intvolume":" 4554","user_id":"83781","doi":"10.1007/978-3-540-73279-2_31","_id":"4768","place":"Berlin","series_title":"Lecture Notes in Computer Science","publication_status":"published","abstract":[{"lang":"eng","text":"Several evaluations of team awareness systems showed, that interruptions and privacy violations during usage often lead to the rejection of the system by users. Most authors argue that this rejection is due to a fundamental dual trade-off between sending awareness information and privacy, and between receiving awareness information and disruption or resource consumption. While the assumption of a fundamental trade-off is widely accepted in state-of-the-art research, this paper disputes the predominant hypothesis. Instead, it is argued, that the trade-off is not of fundamental nature, but caused by neglecting elementary aspects in the design process. In order to verify this line of argument, a novel interface concept for mediating socio-emotional awareness information is presented. To verify the validity of the conceptual approach, several evaluations were conducted. The evaluations verified the approach of this paper and showed, that a cautious interface design can enhance user privacy in multi-user awareness systems and minimize disruptive effects on primary tasks, without reducing awareness mediation and usability."}],"conference":{"name":"4th International Conference on Universal Access in Human-Computer Interaction, UAHCI 2007, Held as Part of HCI International 2007","location":"Beijing, China","end_date":"2007-07-27","start_date":"2007-07-22"},"department":[{"_id":"DEP5023"}],"publisher":"Springer"},{"language":[{"iso":"eng"}],"keyword":["Information security","Inspection","Printing machinery","Optical sensors","Data security","Personnel","Fuzzy systems","Sensor systems","Expert systems","Ink"],"doi":"10.1109/ICIF.2006.301779","_id":"2062","date_updated":"2023-03-15T13:49:38Z","user_id":"45673","date_created":"2019-11-29T13:35:03Z","type":"conference","publication_identifier":{"isbn":[" 1-4244-0953-5"]},"publication":" 2006 9th International Conference on Information Fusion","page":"1-8","status":"public","publisher":"9th International Conference on Information Fusion, 2006. ICIF '06","department":[{"_id":"DEP5023"}],"main_file_link":[{"url":"https://ieeexplore.ieee.org/document/4086065/keywords#full-text-header"}],"author":[{"first_name":"Walter","full_name":"Dyck, Walter","last_name":"Dyck"},{"id":"2128","last_name":"Schaede","full_name":"Schaede, Johannes","first_name":"Johannes"},{"first_name":"Thomas","full_name":"Türke, Thomas","last_name":"Türke"},{"orcid":"0000-0002-3325-7887","first_name":"Volker","id":"1804","last_name":"Lohweg","full_name":"Lohweg, Volker"}],"year":2006,"abstract":[{"lang":"eng","text":"Bank note inspection is a complex task. As more and more print techniques and new security features are established, total quality security and bank note printing must be assured. Therefore, this factor necessitates change of a sensorial concept in general. We propose an optical-acoustical inspection method based upon the concepts of information fusion and fuzzy interpretation of data measures. Furthermore, we present a simplified scheme for information fusion for pattern recognition and data classification based on parametrical unimodal potential functions and a Sugeno-type score value analysis. Digital Object Identifier: 10.1109/ICIF.2006.301779
"}],"publication_status":"published","citation":{"chicago":"Dyck, Walter, Johannes Schaede, Thomas Türke, and Volker Lohweg. “Information Fusion Application On Security Printing With Parametrical Fuzzy Classification.” In 2006 9th International Conference on Information Fusion, 1–8. 9th International Conference on Information Fusion, 2006. ICIF ’06, 2006. https://doi.org/10.1109/ICIF.2006.301779.","apa":"Dyck, W., Schaede, J., Türke, T., & Lohweg, V. (2006). Information Fusion Application On Security Printing With Parametrical Fuzzy Classification. In 2006 9th International Conference on Information Fusion (pp. 1–8). 9th International Conference on Information Fusion, 2006. ICIF ’06. https://doi.org/10.1109/ICIF.2006.301779","havard":"W. Dyck, J. Schaede, T. Türke, V. Lohweg, Information Fusion Application On Security Printing With Parametrical Fuzzy Classification, in: 2006 9th International Conference on Information Fusion, 9th International Conference on Information Fusion, 2006. ICIF ’06, 2006: pp. 1–8.","mla":"Dyck, Walter, et al. “Information Fusion Application On Security Printing With Parametrical Fuzzy Classification.” 2006 9th International Conference on Information Fusion, 9th International Conference on Information Fusion, 2006. ICIF ’06, 2006, pp. 1–8, doi:10.1109/ICIF.2006.301779.","bjps":"Dyck W et al. (2006) Information Fusion Application On Security Printing With Parametrical Fuzzy Classification. 2006 9th International Conference on Information Fusion. 9th International Conference on Information Fusion, 2006. ICIF ’06, pp. 1–8.","ufg":"Dyck, Walter et. al. (2006): Information Fusion Application On Security Printing With Parametrical Fuzzy Classification, in: 2006 9th International Conference on Information Fusion, S. 1–8.","van":"Dyck W, Schaede J, Türke T, Lohweg V. Information Fusion Application On Security Printing With Parametrical Fuzzy Classification. In: 2006 9th International Conference on Information Fusion. 9th International Conference on Information Fusion, 2006. ICIF ’06; 2006. p. 1–8.","chicago-de":"Dyck, Walter, Johannes Schaede, Thomas Türke und Volker Lohweg. 2006. Information Fusion Application On Security Printing With Parametrical Fuzzy Classification. In: 2006 9th International Conference on Information Fusion, 1–8. 9th International Conference on Information Fusion, 2006. ICIF ’06. doi:10.1109/ICIF.2006.301779, .","din1505-2-1":"Dyck, Walter ; Schaede, Johannes ; Türke, Thomas ; Lohweg, Volker: Information Fusion Application On Security Printing With Parametrical Fuzzy Classification. In: 2006 9th International Conference on Information Fusion : 9th International Conference on Information Fusion, 2006. ICIF ’06, 2006, S. 1–8","short":"W. Dyck, J. Schaede, T. Türke, V. Lohweg, in: 2006 9th International Conference on Information Fusion, 9th International Conference on Information Fusion, 2006. ICIF ’06, 2006, pp. 1–8.","ieee":"W. Dyck, J. Schaede, T. Türke, and V. Lohweg, “Information Fusion Application On Security Printing With Parametrical Fuzzy Classification,” in 2006 9th International Conference on Information Fusion, 2006, pp. 1–8.","ama":"Dyck W, Schaede J, Türke T, Lohweg V. Information Fusion Application On Security Printing With Parametrical Fuzzy Classification. In: 2006 9th International Conference on Information Fusion. 9th International Conference on Information Fusion, 2006. ICIF ’06; 2006:1-8. doi:10.1109/ICIF.2006.301779"},"title":"Information Fusion Application On Security Printing With Parametrical Fuzzy Classification"},{"user_id":"45673","type":"conference","place":"Genova","_id":"2058","doi":" 10.1109/ICIP.2005.1529759","publication_status":"published","publisher":"IEEE","department":[{"_id":"DEP5023"}],"abstract":[{"text":"Nonlinear spatial transforms and fuzzy pattern classification with unimodal potential functions are established in signal processing. They have proved to be excellent tools in feature extraction and classification. In this paper we present a hardware accelerated image processing and classification scheme for rotation and translation tolerant two-dimensional pattern recognition, which is based on one-dimensional nonlinear discrete circular transforms. However, the scheme is simple; it is stable and therefore well suited for industrial applications. An implementation on one field programmable gate array (FPGA) is proposed.","lang":"eng"}],"date_updated":"2023-03-15T13:49:38Z","publication":"IEEE International Conference On Image Processing (ICIP), Proceedings","publication_identifier":{"issn":["1522-4880 "],"isbn":["0-7803-9134-9"],"eissn":["2381-8549 "]},"date_created":"2019-11-29T13:17:49Z","keyword":["Pattern recognition","Field programmable gate arrays","Neural networks","Image processing","Discrete transforms","Signal processing","Image retrieval","Image recognition","Transient analysis","Fuzzy systems"],"language":[{"iso":"eng"}],"citation":{"havard":"T. Henke, V. Lohweg, A Simplified Scheme For Hardware-Based Pattern Recognition, in: IEEE International Conference On Image Processing (ICIP), Proceedings, IEEE, Genova, 2005: pp. 349–352.","bjps":"Henke T and Lohweg V (2005) A Simplified Scheme For Hardware-Based Pattern Recognition. IEEE International Conference On Image Processing (ICIP), Proceedings. Genova: IEEE, pp. 349–352.","mla":"Henke, Tobias, and Volker Lohweg. “A Simplified Scheme For Hardware-Based Pattern Recognition.” IEEE International Conference On Image Processing (ICIP), Proceedings, IEEE, 2005, pp. 349–52, doi: 10.1109/ICIP.2005.1529759.","ufg":"Henke, Tobias/Lohweg, Volker (2005): A Simplified Scheme For Hardware-Based Pattern Recognition, in: IEEE International Conference On Image Processing (ICIP), Proceedings, Genova, S. 349–352.","van":"Henke T, Lohweg V. A Simplified Scheme For Hardware-Based Pattern Recognition. In: IEEE International Conference On Image Processing (ICIP), Proceedings. Genova: IEEE; 2005. p. 349–52.","chicago":"Henke, Tobias, and Volker Lohweg. “A Simplified Scheme For Hardware-Based Pattern Recognition.” In IEEE International Conference On Image Processing (ICIP), Proceedings, 349–52. Genova: IEEE, 2005. https://doi.org/ 10.1109/ICIP.2005.1529759.","apa":"Henke, T., & Lohweg, V. (2005). A Simplified Scheme For Hardware-Based Pattern Recognition. In IEEE International Conference On Image Processing (ICIP), Proceedings (pp. 349–352). Genova: IEEE. https://doi.org/ 10.1109/ICIP.2005.1529759","din1505-2-1":"Henke, Tobias ; Lohweg, Volker: A Simplified Scheme For Hardware-Based Pattern Recognition. In: IEEE International Conference On Image Processing (ICIP), Proceedings. Genova : IEEE, 2005, S. 349–352","chicago-de":"Henke, Tobias und Volker Lohweg. 2005. A Simplified Scheme For Hardware-Based Pattern Recognition. In: IEEE International Conference On Image Processing (ICIP), Proceedings, 349–352. Genova: IEEE. doi: 10.1109/ICIP.2005.1529759, .","short":"T. Henke, V. Lohweg, in: IEEE International Conference On Image Processing (ICIP), Proceedings, IEEE, Genova, 2005, pp. 349–352.","ama":"Henke T, Lohweg V. A Simplified Scheme For Hardware-Based Pattern Recognition. In: IEEE International Conference On Image Processing (ICIP), Proceedings. Genova: IEEE; 2005:349-352. doi: 10.1109/ICIP.2005.1529759","ieee":"T. Henke and V. Lohweg, “A Simplified Scheme For Hardware-Based Pattern Recognition,” in IEEE International Conference On Image Processing (ICIP), Proceedings, 2005, pp. 349–352."},"title":"A Simplified Scheme For Hardware-Based Pattern Recognition","status":"public","page":"349 - 352","author":[{"first_name":"Tobias","last_name":"Henke","full_name":"Henke, Tobias"},{"orcid":"0000-0002-3325-7887","last_name":"Lohweg","id":"1804","full_name":"Lohweg, Volker","first_name":"Volker"}],"main_file_link":[{"url":"https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=1529759"}],"year":2005},{"date_created":"2021-02-02T10:09:09Z","publication_identifier":{"eissn":["1558-0814 "],"issn":["0018-9162 "]},"publication":"Computer : innovative technology for computer professionals ","date_updated":"2023-03-15T13:49:56Z","oa":"1","language":[{"iso":"eng"}],"keyword":["Personal digital assistants","Refrigeration","Portable computers","Control systems","Roads","Availability","Cellular phones","Communications technology","Humans","Smart homes"],"extern":"1","title":"Designing Smart Artifacts for Smart Environments","volume":38,"citation":{"ama":"Streitz N, Röcker C, Prante T, van Alphen D, Stenzel R, Magerkurth C. Designing Smart Artifacts for Smart Environments. Computer : innovative technology for computer professionals . 2005;38(3):41 – 49. doi:10.1109/MC.2005.92","ieee":"N. Streitz, C. Röcker, T. Prante, D. van Alphen, R. Stenzel, and C. Magerkurth, “Designing Smart Artifacts for Smart Environments,” Computer : innovative technology for computer professionals , vol. 38, no. 3, pp. 41 – 49, 2005.","short":"N. Streitz, C. Röcker, T. Prante, D. van Alphen, R. Stenzel, C. Magerkurth, Computer : Innovative Technology for Computer Professionals 38 (2005) 41 – 49.","chicago-de":"Streitz, Norbert, Carsten Röcker, Thorsten Prante, Daniel van Alphen, Richard Stenzel und Carsten Magerkurth. 2005. Designing Smart Artifacts for Smart Environments. Computer : innovative technology for computer professionals 38, Nr. 3: 41 – 49. doi:10.1109/MC.2005.92, .","din1505-2-1":"Streitz, Norbert ; Röcker, Carsten ; Prante, Thorsten ; van Alphen, Daniel ; Stenzel, Richard ; Magerkurth, Carsten: Designing Smart Artifacts for Smart Environments. In: Computer : innovative technology for computer professionals Bd. 38. Piscataway, NJ, IEEE (2005), Nr. 3, S. 41 – 49","van":"Streitz N, Röcker C, Prante T, van Alphen D, Stenzel R, Magerkurth C. Designing Smart Artifacts for Smart Environments. Computer : innovative technology for computer professionals . 2005;38(3):41 – 49.","ufg":"Streitz, Norbert et. al. (2005): Designing Smart Artifacts for Smart Environments, in: Computer : innovative technology for computer professionals 38 (3), S. 41 – 49.","bjps":"Streitz N et al. (2005) Designing Smart Artifacts for Smart Environments. Computer : innovative technology for computer professionals 38, 41 – 49.","havard":"N. Streitz, C. Röcker, T. Prante, D. van Alphen, R. Stenzel, C. Magerkurth, Designing Smart Artifacts for Smart Environments, Computer : Innovative Technology for Computer Professionals . 38 (2005) 41 – 49.","mla":"Streitz, Norbert, et al. “Designing Smart Artifacts for Smart Environments.” Computer : Innovative Technology for Computer Professionals , vol. 38, no. 3, IEEE, 2005, pp. 41 – 49, doi:10.1109/MC.2005.92.","apa":"Streitz, N., Röcker, C., Prante, T., van Alphen, D., Stenzel, R., & Magerkurth, C. (2005). Designing Smart Artifacts for Smart Environments. Computer : Innovative Technology for Computer Professionals , 38(3), 41 – 49. https://doi.org/10.1109/MC.2005.92","chicago":"Streitz, Norbert, Carsten Röcker, Thorsten Prante, Daniel van Alphen, Richard Stenzel, and Carsten Magerkurth. “Designing Smart Artifacts for Smart Environments.” Computer : Innovative Technology for Computer Professionals 38, no. 3 (2005): 41 – 49. https://doi.org/10.1109/MC.2005.92."},"author":[{"last_name":"Streitz","full_name":"Streitz, Norbert","first_name":"Norbert"},{"full_name":"Röcker, Carsten","last_name":"Röcker","id":"61525","first_name":"Carsten"},{"last_name":"Prante","full_name":"Prante, Thorsten","first_name":"Thorsten"},{"last_name":"van Alphen","first_name":"Daniel","full_name":"van Alphen, Daniel"},{"first_name":"Richard","full_name":"Stenzel, Richard","last_name":"Stenzel"},{"first_name":"Carsten","last_name":"Magerkurth","full_name":"Magerkurth, Carsten"}],"main_file_link":[{"open_access":"1"}],"year":2005,"page":"41 – 49","status":"public","type":"journal_article","user_id":"15514","intvolume":" 38","place":"Piscataway, NJ","doi":"10.1109/MC.2005.92","_id":"4824","publication_status":"published","department":[{"_id":"DEP5023"}],"abstract":[{"text":"The integration of information, communication, and sensing technologies into our everyday objects has created smart environments. Creating the smart artifacts that constitute these environments requires augmenting their standard functionality to support a new quality of interaction and behavior.A system-oriented, importunate smartness approach creates an environment that gives individual smart artifacts or the environment itself certain self-directed actions based on previously collected information. For example, a space can be smart by having and exploiting knowledge about the persons and artifacts currently situated within its borders.In contrast, a people-oriented, empowering smartness approach places the empowering function in the foreground by assuming that smart spaces make people smarter. This approach empowers users to make decisions and take actions as mature and responsible people.Although in some cases it might be more efficient if the system doesnýt ask for a userýs feedback and confirmation at every step in an action chain, the overall design rationale should aim to keep the user in the loop and in control whenever possible.","lang":"eng"}],"issue":"3","publisher":"IEEE"}]