[{"title":"Circular Facade Design: The Importance of end of life scenarios to reduce environmental Impact","citation":{"van":"Badr AWSM, Arztmann D, Starz F, Herrmann C. Circular Facade Design: The Importance of end of life scenarios to reduce environmental Impact. DESIGN STRATEGIES : SPECIAL ISSUE Impulses from teaching and research. 2025;2025(4):39–45.","ufg":"Badr, Abdelrahman Walid Shawky Mahmoud u. a.: Circular Facade Design: The Importance of end of life scenarios to reduce environmental Impact, in: DESIGN STRATEGIES : SPECIAL ISSUE Impulses from teaching and research 2025 (2025), H. 4, S. 39–45.","bjps":"Badr AWSM et al. (2025) Circular Facade Design: The Importance of End of Life Scenarios to Reduce Environmental Impact. DESIGN STRATEGIES : SPECIAL ISSUE Impulses from teaching and research 2025, 39–45.","mla":"Badr, Abdelrahman Walid Shawky Mahmoud, et al. “Circular Facade Design: The Importance of End of Life Scenarios to Reduce Environmental Impact.” DESIGN STRATEGIES : SPECIAL ISSUE Impulses from Teaching and Research, vol. 2025, no. 4, 2025, pp. 39–45.","havard":"A.W.S.M. Badr, D. Arztmann, F. Starz, C. Herrmann, Circular Facade Design: The Importance of end of life scenarios to reduce environmental Impact, DESIGN STRATEGIES : SPECIAL ISSUE Impulses from Teaching and Research. 2025 (2025) 39–45.","apa":"Badr, A. W. S. M., Arztmann, D., Starz, F., & Herrmann, C. (2025). Circular Facade Design: The Importance of end of life scenarios to reduce environmental Impact. DESIGN STRATEGIES : SPECIAL ISSUE Impulses from Teaching and Research, 2025(4), 39–45.","chicago":"Badr, Abdelrahman Walid Shawky Mahmoud, Daniel Arztmann, Florian Starz, and Carmen Herrmann. “Circular Facade Design: The Importance of End of Life Scenarios to Reduce Environmental Impact.” DESIGN STRATEGIES : SPECIAL ISSUE Impulses from Teaching and Research 2025, no. 4 (2025): 39–45.","short":"A.W.S.M. Badr, D. Arztmann, F. Starz, C. Herrmann, DESIGN STRATEGIES : SPECIAL ISSUE Impulses from Teaching and Research 2025 (2025) 39–45.","din1505-2-1":"Badr, Abdelrahman Walid Shawky Mahmoud ; Arztmann, Daniel ; Starz, Florian ; Herrmann, Carmen: Circular Facade Design: The Importance of end of life scenarios to reduce environmental Impact. In: DESIGN STRATEGIES : SPECIAL ISSUE Impulses from teaching and research Bd. 2025. Detmold, Technische Hochschule Ostwestfalen-Lippe (2025), Nr. 4, S. 39–45","chicago-de":"Badr, Abdelrahman Walid Shawky Mahmoud, Daniel Arztmann, Florian Starz und Carmen Herrmann. 2025. Circular Facade Design: The Importance of end of life scenarios to reduce environmental Impact. DESIGN STRATEGIES : SPECIAL ISSUE Impulses from teaching and research 2025, Nr. 4: 39–45.","ama":"Badr AWSM, Arztmann D, Starz F, Herrmann C. Circular Facade Design: The Importance of end of life scenarios to reduce environmental Impact. DESIGN STRATEGIES : SPECIAL ISSUE Impulses from teaching and research. 2025;2025(4):39-45.","ieee":"A. W. S. M. Badr, D. Arztmann, F. Starz, and C. Herrmann, “Circular Facade Design: The Importance of end of life scenarios to reduce environmental Impact,” DESIGN STRATEGIES : SPECIAL ISSUE Impulses from teaching and research, vol. 2025, no. 4, pp. 39–45, 2025."},"volume":2025,"year":"2025","author":[{"id":"81781","first_name":"Abdelrahman Walid Shawky Mahmoud","last_name":"Badr","full_name":"Badr, Abdelrahman Walid Shawky Mahmoud"},{"last_name":"Arztmann","id":"58805","full_name":"Arztmann, Daniel","first_name":"Daniel"},{"first_name":"Florian","last_name":"Starz","full_name":"Starz, Florian"},{"full_name":"Herrmann, Carmen","first_name":"Carmen","last_name":"Herrmann"}],"main_file_link":[{"url":"https://www.yumpu.com/en/document/read/70662685/design-strategies-impulse-sustainable-facades-vol-4/39","open_access":"1"}],"page":"39-45","status":"public","date_created":"2025-10-13T11:07:27Z","publication":"DESIGN STRATEGIES : SPECIAL ISSUE Impulses from teaching and research","publication_identifier":{"eissn":["2943-4467"],"issn":["2943-4459"]},"date_updated":"2026-01-23T09:42:42Z","oa":"1","language":[{"iso":"eng"}],"keyword":["circularity","end of life scenarios","embodied carbon","stick systems"],"publication_status":"published","department":[{"_id":"DEP1034"},{"_id":"DEP1055"}],"ddc":["720"],"abstract":[{"text":"This study explores the transition from a linear to a circular economy in the building and construction industry, focusing on the environmental impacts of façade systems in office buildings. The linear „Take-Make-Dispose“ model contributes significantly to resource consumption, waste generation, and CO2 emissions, with the construction sector responsible for 35% of global waste. The EU‘s Circular Economy Action Plan emphasizes designing products to minimize waste and retain resources, highlighting the importance of end-of-life (EoL) considerations in construction. Life Cycle Assessment (LCA) is employed to evaluate the environmental impacts of design decisions, particularly for stick curtain wall systems, which are widely used in office buildings. The research adopts a mixed methodology, combining literature review and design process analysis, focusing on frame materials (aluminum, steel, wood) and glass options. Three EoL scenarios—reuse, recycling, and demolition—are assessed to determine their impact on embodied carbon. The study is limited to office buildings in Germany, with a case study in Stuttgart, due to the prevalence of stick systems in such structures. Preliminary findings indicate that reuse scenarios generally have the lowest environmental impact, though outcomes vary based on material combinations. By systematically analyzing EoL scenarios, this research provides a framework for optimizing façade designs to enhance sustainability, reduce waste, and promote circularity in real-world construction projects.","lang":"eng"}],"issue":"4","publisher":"Technische Hochschule Ostwestfalen-Lippe","type":"scientific_journal_article","user_id":"83781","intvolume":" 2025","has_accepted_license":"1","place":"Detmold","_id":"13253"},{"date_created":"2025-11-13T17:22:55Z","publication":"International Journal of Human–Computer Interaction","publication_identifier":{"eissn":["1532-7590"],"issn":["1044-7318"]},"date_updated":"2025-11-24T07:58:41Z","language":[{"iso":"eng"}],"keyword":["Gamification","manufacturing","inclusivity : human-centered systems : literature review"],"title":"User-Centered Gamification in Manufacturing: A Systematic Literature Review","volume":41,"citation":{"ama":"Mordaschew V, Latos B, Rubart J, Röcker C. User-Centered Gamification in Manufacturing: A Systematic Literature Review. International Journal of Human–Computer Interaction. 2025;41:1-28. doi:10.1080/10447318.2025.2578390","ieee":"V. Mordaschew, B. Latos, J. Rubart, and C. Röcker, “User-Centered Gamification in Manufacturing: A Systematic Literature Review,” International Journal of Human–Computer Interaction, vol. 41, pp. 1–28, 2025, doi: 10.1080/10447318.2025.2578390.","van":"Mordaschew V, Latos B, Rubart J, Röcker C. User-Centered Gamification in Manufacturing: A Systematic Literature Review. International Journal of Human–Computer Interaction. 2025;41:1–28.","havard":"V. Mordaschew, B. Latos, J. Rubart, C. Röcker, User-Centered Gamification in Manufacturing: A Systematic Literature Review, International Journal of Human–Computer Interaction. 41 (2025) 1–28.","bjps":"Mordaschew V et al. (2025) User-Centered Gamification in Manufacturing: A Systematic Literature Review. International Journal of Human–Computer Interaction 41, 1–28.","mla":"Mordaschew, Viktoria, et al. “User-Centered Gamification in Manufacturing: A Systematic Literature Review.” International Journal of Human–Computer Interaction, vol. 41, 2025, pp. 1–28, https://doi.org/10.1080/10447318.2025.2578390.","ufg":"Mordaschew, Viktoria u. a.: User-Centered Gamification in Manufacturing: A Systematic Literature Review, in: International Journal of Human–Computer Interaction 41 (2025), S. 1–28.","apa":"Mordaschew, V., Latos, B., Rubart, J., & Röcker, C. (2025). User-Centered Gamification in Manufacturing: A Systematic Literature Review. International Journal of Human–Computer Interaction, 41, 1–28. https://doi.org/10.1080/10447318.2025.2578390","chicago":"Mordaschew, Viktoria, Benedikt Latos, Jessica Rubart, and Carsten Röcker. “User-Centered Gamification in Manufacturing: A Systematic Literature Review.” International Journal of Human–Computer Interaction 41 (2025): 1–28. https://doi.org/10.1080/10447318.2025.2578390.","short":"V. Mordaschew, B. Latos, J. Rubart, C. Röcker, International Journal of Human–Computer Interaction 41 (2025) 1–28.","chicago-de":"Mordaschew, Viktoria, Benedikt Latos, Jessica Rubart und Carsten Röcker. 2025. User-Centered Gamification in Manufacturing: A Systematic Literature Review. International Journal of Human–Computer Interaction 41: 1–28. doi:10.1080/10447318.2025.2578390, .","din1505-2-1":"Mordaschew, Viktoria ; Latos, Benedikt ; Rubart, Jessica ; Röcker, Carsten: User-Centered Gamification in Manufacturing: A Systematic Literature Review. In: International Journal of Human–Computer Interaction Bd. 41. New York, NY, Taylor & Francis (2025), S. 1–28"},"year":"2025","author":[{"first_name":"Viktoria","last_name":"Mordaschew","full_name":"Mordaschew, Viktoria","id":"79005"},{"first_name":"Benedikt","last_name":"Latos","id":"84474","full_name":"Latos, Benedikt"},{"id":"45672","first_name":"Jessica","last_name":"Rubart","full_name":"Rubart, Jessica"},{"last_name":"Röcker","first_name":"Carsten","id":"61525","full_name":"Röcker, Carsten"}],"page":"1-28","status":"public","type":"scientific_journal_article","user_id":"83781","intvolume":" 41","place":"New York, NY","doi":"10.1080/10447318.2025.2578390","_id":"13301","publication_status":"published","department":[{"_id":"DEP5023"}],"abstract":[{"lang":"eng","text":"Production environments are characterized by an increasingly diverse workforce caused by demographic change, globalization, and the rising demand for inclusion and equality. To ensure employee satisfaction for such a diverse workforce, gamification is a promising method. However, one-size-fits-all approaches are not sufficient, and more user-adaptive and inclusive gamified systems are needed. Therefore, this systematic literature review aims to answer the question of which user-adaptive gamified systems exist for manufacturing and how they provide inclusivity for individuals in their everyday work. Following PRISMA guidelines, a search of five electronic databases retrieved 22 relevant articles. Analysis of the literature revealed a lack of user-centered and inclusive gamified systems. Further, limited empirical evaluations in real production environments, limited application scenarios, and the need for more diverse research were identified. Based on the results, this study identifies key research gaps and provides recommendations for future research."}],"publisher":"Taylor & Francis"},{"citation":{"chicago":"Klepp, Georg Heinrich. “Solar Stirling for Renewable Energy Multigeneration Systems.” Sustainability 17, no. 3 (2025). https://doi.org/10.3390/su17031257.","apa":"Klepp, G. H. (2025). Solar Stirling for Renewable Energy Multigeneration Systems. Sustainability, 17(3), Article 1257. https://doi.org/10.3390/su17031257","bjps":"Klepp GH (2025) Solar Stirling for Renewable Energy Multigeneration Systems. Sustainability 17.","havard":"G.H. Klepp, Solar Stirling for Renewable Energy Multigeneration Systems, Sustainability. 17 (2025).","mla":"Klepp, Georg Heinrich. “Solar Stirling for Renewable Energy Multigeneration Systems.” Sustainability, vol. 17, no. 3, 1257, 2025, https://doi.org/10.3390/su17031257.","ufg":"Klepp, Georg Heinrich: Solar Stirling for Renewable Energy Multigeneration Systems, in: Sustainability 17 (2025), H. 3.","van":"Klepp GH. Solar Stirling for Renewable Energy Multigeneration Systems. Sustainability. 2025;17(3).","din1505-2-1":"Klepp, Georg Heinrich: Solar Stirling for Renewable Energy Multigeneration Systems. In: Sustainability Bd. 17. Basel, MDPI AG (2025), Nr. 3","chicago-de":"Klepp, Georg Heinrich. 2025. Solar Stirling for Renewable Energy Multigeneration Systems. Sustainability 17, Nr. 3. doi:10.3390/su17031257, .","short":"G.H. Klepp, Sustainability 17 (2025).","ieee":"G. H. Klepp, “Solar Stirling for Renewable Energy Multigeneration Systems,” Sustainability, vol. 17, no. 3, Art. no. 1257, 2025, doi: 10.3390/su17031257.","ama":"Klepp GH. Solar Stirling for Renewable Energy Multigeneration Systems. Sustainability. 2025;17(3). doi:10.3390/su17031257"},"volume":17,"title":"Solar Stirling for Renewable Energy Multigeneration Systems","status":"public","year":"2025","author":[{"first_name":"Georg Heinrich","full_name":"Klepp, Georg Heinrich","id":"49011","last_name":"Klepp"}],"date_updated":"2025-12-11T14:01:17Z","date_created":"2025-12-11T13:57:43Z","publication":"Sustainability","publication_identifier":{"eissn":["2071-1050"]},"language":[{"iso":"eng"}],"keyword":["dish–Stirling system","multigeneration renewable energy systems","cogeneration","solar"],"publication_status":"published","publisher":"MDPI AG","issue":"3","abstract":[{"lang":"eng","text":"This study explores the feasibility and potential of integrating dish–Stirling systems (DSSs) into multigeneration energy systems, focusing on their ability to produce both thermal and electrical energy. By leveraging the concentrated solar power capabilities of DSSs, this research examines their performance relative to alternative solutions such as photovoltaic (PV) systems and solar heating. A 25 kW Stirling Energy Systems (SES) DSS served as the basis for the analysis. Simulations were performed for local 2022 weather conditions in Germany. The study employed a detailed modeling approach using the NREL System Advisor Model (SAM) to quantify the energy outputs and evaluate the system efficiencies. The results indicate that the DSS achieved an electrical efficiency of 25% and a combined efficiency of 78% when accounting for the maximum thermal energy generated. Seasonal analysis highlights the adaptability to fluctuating energy demands, with advantages in winter heating applications. Comparative evaluations revealed DSSs as a viable cogeneration alternative to standalone PV systems and solar heaters, offering reduced environmental impacts and enhanced energy efficiency. Future work will address real-world operational conditions, including thermal storage and multigeneration integration, positioning the DSS as a sustainable solution for renewable energy generation."}],"conference":{"name":"12th European Conference on Renewable Energy Systems","location":"Mallorca / Spain ","end_date":"2024-05-17","start_date":"2024-05-16"},"intvolume":" 17","user_id":"83781","type":"scientific_journal_article","article_number":"1257","doi":"10.3390/su17031257","_id":"13321","place":"Basel"},{"type":"book_chapter","user_id":"83781","place":"Mailand","_id":"12758","publication_status":"published","department":[{"_id":"DEP1000"},{"_id":"DEP1055"}],"abstract":[{"lang":"eng","text":"hapter 6 explores the multifaceted relationship between NBS and human health in urban environments. It begins by discussing the interconnectedness of nature and human well-being, highlighting the potential of NBS in reducing environmental stressors, restoring capacities and inviting for a more (inter-)active lifestyle. The chapter then delves into specific aspects of health addressed by NBS, such as the mitigation of air pollution and the enhancement of thermal comfort. Additionally, it examines the role of allotment gardens in promoting well-being and social cohesion within urban communities. Furthermore, the chapter explores how NBS can encourage healthy behaviour among urban residents, offering insights into understanding behavioural patterns. Concluding with recommendations for practitioners, the chapter underscores the importance of effectively implementing NBS to improve health and well-being in urban settings. "}],"publisher":"Fondazione Giangiacomo Feltrinelli","publication":"Urban Inclusive and Innovative Nature - Fundaments and Practices for the Co-creation of Nature-based Cities","publication_identifier":{"isbn":["978-88-6835-519-7"]},"date_created":"2025-04-04T06:32:08Z","date_updated":"2025-04-08T06:36:12Z","editor":[{"last_name":"Ferreira","first_name":"Isabel","full_name":"Ferreira, Isabel"},{"first_name":"Beatriz","last_name":"Caitana","full_name":"Caitana, Beatriz"},{"first_name":"Nathalie","full_name":"Nunes, Nathalie","last_name":"Nunes"},{"full_name":"Ribal, Eddine","first_name":"Eddine","last_name":"Ribal"}],"oa":"1","keyword":["Nature-based Solutions","Public health","Air pollution","Thermal comfort","Social cohesion","Physical activity"],"language":[{"iso":"eng"}],"title":"How Nature-based Solutions Promote Health & Wellbeing","citation":{"van":"Cardinali M, Bodenan P, Burov A, Chancibault K, Fleury G, Herpin S, et al. How Nature-based Solutions Promote Health & Wellbeing. In: Ferreira I, Caitana B, Nunes N, Ribal E, editors. Urban Inclusive and Innovative Nature - Fundaments and Practices for the Co-creation of Nature-based Cities. Mailand: Fondazione Giangiacomo Feltrinelli; 2024. p. 302–69.","ufg":"Cardinali, Marcel u. a.: How Nature-based Solutions Promote Health & Wellbeing, in: Ferreira, Isabel u. a. (Hgg.): Urban Inclusive and Innovative Nature - Fundaments and Practices for the Co-creation of Nature-based Cities, Mailand 2024, S. 302–369.","bjps":"Cardinali M et al. (2024) How Nature-Based Solutions Promote Health & Wellbeing. In Ferreira I et al. (eds), Urban Inclusive and Innovative Nature - Fundaments and Practices for the Co-Creation of Nature-Based Cities. Mailand: Fondazione Giangiacomo Feltrinelli, pp. 302–369.","havard":"M. Cardinali, P. Bodenan, A. Burov, K. Chancibault, G. Fleury, S. Herpin, J.L. Roy-Lisneuf, A. Sapin, M.T. Petrova, I. Mutafchiiska, How Nature-based Solutions Promote Health & Wellbeing, in: I. Ferreira, B. Caitana, N. Nunes, E. Ribal (Eds.), Urban Inclusive and Innovative Nature - Fundaments and Practices for the Co-Creation of Nature-Based Cities, Fondazione Giangiacomo Feltrinelli, Mailand, 2024: pp. 302–369.","mla":"Cardinali, Marcel, et al. “How Nature-Based Solutions Promote Health & Wellbeing.” Urban Inclusive and Innovative Nature - Fundaments and Practices for the Co-Creation of Nature-Based Cities, edited by Isabel Ferreira et al., Fondazione Giangiacomo Feltrinelli, 2024, pp. 302–69.","apa":"Cardinali, M., Bodenan, P., Burov, A., Chancibault, K., Fleury, G., Herpin, S., Roy-Lisneuf, J. L., Sapin, A., Petrova, M. T., & Mutafchiiska, I. (2024). How Nature-based Solutions Promote Health & Wellbeing. In I. Ferreira, B. Caitana, N. Nunes, & E. Ribal (Eds.), Urban Inclusive and Innovative Nature - Fundaments and Practices for the Co-creation of Nature-based Cities (pp. 302–369). Fondazione Giangiacomo Feltrinelli.","chicago":"Cardinali, Marcel, Philippe Bodenan, Angel Burov, Katia Chancibault, Ghozlane Fleury, Sophie Herpin, Jude Le Roy-Lisneuf, Arnaud Sapin, Milena Tasheva Petrova, and Irina Mutafchiiska. “How Nature-Based Solutions Promote Health & Wellbeing.” In Urban Inclusive and Innovative Nature - Fundaments and Practices for the Co-Creation of Nature-Based Cities, edited by Isabel Ferreira, Beatriz Caitana, Nathalie Nunes, and Eddine Ribal, 302–69. Mailand: Fondazione Giangiacomo Feltrinelli, 2024.","short":"M. Cardinali, P. Bodenan, A. Burov, K. Chancibault, G. Fleury, S. Herpin, J.L. Roy-Lisneuf, A. Sapin, M.T. Petrova, I. Mutafchiiska, in: I. Ferreira, B. Caitana, N. Nunes, E. Ribal (Eds.), Urban Inclusive and Innovative Nature - Fundaments and Practices for the Co-Creation of Nature-Based Cities, Fondazione Giangiacomo Feltrinelli, Mailand, 2024, pp. 302–369.","chicago-de":"Cardinali, Marcel, Philippe Bodenan, Angel Burov, Katia Chancibault, Ghozlane Fleury, Sophie Herpin, Jude Le Roy-Lisneuf, Arnaud Sapin, Milena Tasheva Petrova und Irina Mutafchiiska. 2024. How Nature-based Solutions Promote Health & Wellbeing. In: Urban Inclusive and Innovative Nature - Fundaments and Practices for the Co-creation of Nature-based Cities, hg. von Isabel Ferreira, Beatriz Caitana, Nathalie Nunes, und Eddine Ribal, 302–369. Mailand: Fondazione Giangiacomo Feltrinelli.","din1505-2-1":"Cardinali, Marcel ; Bodenan, Philippe ; Burov, Angel ; Chancibault, Katia ; Fleury, Ghozlane ; Herpin, Sophie ; Roy-Lisneuf, Jude Le ; Sapin, Arnaud ; u. a.: How Nature-based Solutions Promote Health & Wellbeing. In: Ferreira, I. ; Caitana, B. ; Nunes, N. ; Ribal, E. (Hrsg.): Urban Inclusive and Innovative Nature - Fundaments and Practices for the Co-creation of Nature-based Cities. Mailand : Fondazione Giangiacomo Feltrinelli, 2024, S. 302–369","ama":"Cardinali M, Bodenan P, Burov A, et al. How Nature-based Solutions Promote Health & Wellbeing. In: Ferreira I, Caitana B, Nunes N, Ribal E, eds. Urban Inclusive and Innovative Nature - Fundaments and Practices for the Co-Creation of Nature-Based Cities. Fondazione Giangiacomo Feltrinelli; 2024:302-369.","ieee":"M. Cardinali et al., “How Nature-based Solutions Promote Health & Wellbeing,” in Urban Inclusive and Innovative Nature - Fundaments and Practices for the Co-creation of Nature-based Cities, I. Ferreira, B. Caitana, N. Nunes, and E. Ribal, Eds. Mailand: Fondazione Giangiacomo Feltrinelli, 2024, pp. 302–369."},"main_file_link":[{"open_access":"1","url":"https://fondazionefeltrinelli.it/scopri/urban-inclusive-and-innovative-nature/"}],"year":"2024","author":[{"orcid":"0000-0002-8841-9345","first_name":"Marcel","last_name":"Cardinali","id":"58462","full_name":"Cardinali, Marcel"},{"last_name":"Bodenan","full_name":"Bodenan, Philippe","first_name":"Philippe"},{"first_name":"Angel","last_name":"Burov","full_name":"Burov, Angel"},{"full_name":"Chancibault, Katia","first_name":"Katia","last_name":"Chancibault"},{"first_name":"Ghozlane","full_name":"Fleury, Ghozlane","last_name":"Fleury"},{"full_name":"Herpin, Sophie","first_name":"Sophie","last_name":"Herpin"},{"first_name":"Jude Le","full_name":"Roy-Lisneuf, Jude Le","last_name":"Roy-Lisneuf"},{"last_name":"Sapin","full_name":"Sapin, Arnaud","first_name":"Arnaud"},{"first_name":"Milena Tasheva","last_name":"Petrova","full_name":"Petrova, Milena Tasheva"},{"full_name":"Mutafchiiska, Irina","first_name":"Irina","last_name":"Mutafchiiska"}],"status":"public","page":"302–369"},{"date_created":"2025-04-15T08:01:11Z","publication_identifier":{"issn":["1877-0509"]},"publication":"5th International Conference on Industry 4.0 and Smart Manufacturing (ISM)","editor":[{"last_name":"Longo","first_name":"F.","full_name":"Longo, F."},{"last_name":"Shen","first_name":"W.","full_name":"Shen, W."},{"full_name":"Padovano, A.","first_name":"A.","last_name":"Padovano"}],"date_updated":"2025-06-25T12:43:49Z","language":[{"iso":"eng"}],"keyword":["Product Environmental Footprint","Life Cycle Assessment","Sustainability","Cyber-physical Systems"],"title":"The Product Environmental Footprint – A Critical Review","volume":232,"citation":{"ama":"Mordaschew V, Tackenberg S. The Product Environmental Footprint – A Critical Review. Vol 232. (Longo F, Shen W, Padovano A, eds.). Elsevier BV; 2024:493-503. doi:10.1016/j.procs.2024.01.049","van":"Mordaschew V, Tackenberg S. The Product Environmental Footprint – A Critical Review. Longo F, Shen W, Padovano A, editors. 5th International Conference on Industry 4.0 and Smart Manufacturing (ISM). Amsterdam: Elsevier BV; 2024. (Procedia Computer Science; vol. 232).","havard":"V. Mordaschew, S. Tackenberg, The Product Environmental Footprint – A Critical Review, Elsevier BV, Amsterdam, 2024.","bjps":"Mordaschew V and Tackenberg S (2024) The Product Environmental Footprint – A Critical Review, Longo F, Shen W and Padovano A (eds). Amsterdam: Elsevier BV.","mla":"Mordaschew, Viktoria, and Sven Tackenberg. “The Product Environmental Footprint – A Critical Review.” 5th International Conference on Industry 4.0 and Smart Manufacturing (ISM), edited by F. Longo et al., vol. 232, Elsevier BV, 2024, pp. 493–503, https://doi.org/10.1016/j.procs.2024.01.049.","ufg":"Mordaschew, Viktoria/Tackenberg, Sven: The Product Environmental Footprint – A Critical Review, Bd. 232, hg. von Longo, F./Shen, W./Padovano, A., Amsterdam 2024 (Procedia Computer Science).","ieee":"V. Mordaschew and S. Tackenberg, The Product Environmental Footprint – A Critical Review, vol. 232. Amsterdam: Elsevier BV, 2024, pp. 493–503. doi: 10.1016/j.procs.2024.01.049.","apa":"Mordaschew, V., & Tackenberg, S. (2024). The Product Environmental Footprint – A Critical Review. In F. Longo, W. Shen, & A. Padovano (Eds.), 5th International Conference on Industry 4.0 and Smart Manufacturing (ISM) (Vol. 232, pp. 493–503). Elsevier BV. https://doi.org/10.1016/j.procs.2024.01.049","chicago":"Mordaschew, Viktoria, and Sven Tackenberg. The Product Environmental Footprint – A Critical Review. Edited by F. Longo, W. Shen, and A. Padovano. 5th International Conference on Industry 4.0 and Smart Manufacturing (ISM). Vol. 232. Procedia Computer Science. Amsterdam: Elsevier BV, 2024. https://doi.org/10.1016/j.procs.2024.01.049.","short":"V. Mordaschew, S. Tackenberg, The Product Environmental Footprint – A Critical Review, Elsevier BV, Amsterdam, 2024.","chicago-de":"Mordaschew, Viktoria und Sven Tackenberg. 2024. The Product Environmental Footprint – A Critical Review. Hg. von F. Longo, W. Shen, und A. Padovano. 5th International Conference on Industry 4.0 and Smart Manufacturing (ISM). Bd. 232. Procedia Computer Science. Amsterdam: Elsevier BV. doi:10.1016/j.procs.2024.01.049, .","din1505-2-1":"Mordaschew, Viktoria ; Tackenberg, Sven ; Longo, F. ; Shen, W. ; Padovano, A. (Hrsg.): The Product Environmental Footprint – A Critical Review, Procedia Computer Science. Bd. 232. Amsterdam : Elsevier BV, 2024"},"author":[{"full_name":"Mordaschew, Viktoria","last_name":"Mordaschew","first_name":"Viktoria","id":"79005"},{"first_name":"Sven","full_name":"Tackenberg, Sven","id":"71470","last_name":"Tackenberg"}],"year":"2024","page":"493-503","status":"public","type":"conference_editor_article","intvolume":" 232","user_id":"83781","doi":"10.1016/j.procs.2024.01.049","_id":"12788","place":"Amsterdam","series_title":"Procedia Computer Science","publication_status":"published","abstract":[{"lang":"eng","text":"The product environmental footprint (PEF) is one of two life cycle assessment methods from the European Commission. With their published recommendation on environmental footprint methods, the European Commission provides a framework to assess the PEF for every product in a company. Since there is a high probability that the PEF will be mandatory for companies shortly, it is crucial that this recommendation guides companies and mainly technical employees through all phases of the PEF and enables them to execute a PEF study correctly. Therefore, this paper aims to analyze the process of calculating a PEF for a product critically. A PEF study is conducted on a smart luminaire with the software program OpenLCA. The use case concludes that many aspects of the PEF still need to be clarified. Especially the calculation methods behind every impact category need to be more transparent. Further, a comparison of the use case with a provided tutorial from OpenLCA is made. The comparison shows that no information is available on how to model the end-of-life and the use stages, which are mandatory in a PEF study. (c) 2023 The Authors. Published by ELSEVIER B.V."}],"department":[{"_id":"DEP7020"}],"conference":{"name":"5th International Conference on Industry 4.0 and Smart Manufacturing (ISM)","location":"Lisbon, PORTUGAL","end_date":"2023-11-24","start_date":"2023-11-22"},"publisher":"Elsevier BV"},{"intvolume":" 19","user_id":"83781","type":"book_editor","_id":"12908","place":"Berlin, Heidelberg","publication_status":"published","series_title":"Technologien für die intelligente Automation","publisher":"Springer Berlin Heidelberg","abstract":[{"text":"In diesem Open-Access-Tagungsband sind die besten Beiträge des 9. Jahreskolloquiums \"Bildverarbeitung in der Automation\" (BVAu 2024) enthalten. Das Kolloquium fand am 05. November 2024 auf dem Innovation Campus Lemgo statt. Die vorgestellten neuesten Forschungsergebnisse auf den Gebieten der industriellen Bildverarbeitung erweitern den aktuellen Stand der Forschung und Technik. Die in den Beiträgen enthaltenen anschaulichen Anwendungsbeispiele aus dem Bereich der Automation setzen die Ergebnisse in den direkten Anwendungsbezug.","lang":"eng"}],"conference":{"end_date":"2024-11-05","start_date":"2024-11-05","name":"9. Jahreskolloquiums \"Bildverarbeitung in der Automation\" (BVAu 2020)","location":"Lemgo"},"department":[{"_id":"DEP5023"}],"editor":[{"last_name":"Jasperneite","first_name":"Jürgen","id":"1899","full_name":"Jasperneite, Jürgen"},{"full_name":"Lohweg, Volker","first_name":"Volker","last_name":"Lohweg","id":"1804","orcid":"0000-0002-3325-7887"}],"date_updated":"2025-05-12T08:32:07Z","date_created":"2025-05-12T08:32:01Z","publication_identifier":{"eissn":["2522-8587"],"isbn":["978-3-662-70996-2"],"issn":["2522-8579"]},"language":[{"iso":"ger"}],"keyword":["Industrielle Kommunikationstechnik","Industrielle Bildverarbeitung","Network reliability and redundancy methods","Networked Control Systems","Wireless real-time communication","Open Access"],"citation":{"chicago":"Jasperneite, Jürgen, and Volker Lohweg, eds. Bildverarbeitung in der Automation: Ausgewählte Beiträge des Jahreskolloquiums BVAu 2024. Vol. 19. Technologien für die intelligente Automation. Berlin, Heidelberg: Springer Berlin Heidelberg, 2024.","ieee":"J. Jasperneite and V. Lohweg, Eds., Bildverarbeitung in der Automation: Ausgewählte Beiträge des Jahreskolloquiums BVAu 2024, vol. 19. Berlin, Heidelberg: Springer Berlin Heidelberg, 2024.","apa":"Jasperneite, J., & Lohweg, V. (Eds.). (2024). Bildverarbeitung in der Automation: Ausgewählte Beiträge des Jahreskolloquiums BVAu 2024 (Vol. 19). Springer Berlin Heidelberg.","havard":"J. Jasperneite, V. Lohweg, eds., Bildverarbeitung in der Automation: Ausgewählte Beiträge des Jahreskolloquiums BVAu 2024, Springer Berlin Heidelberg, Berlin, Heidelberg, 2024.","bjps":"Jasperneite J and Lohweg V (eds) (2024) Bildverarbeitung in der Automation: Ausgewählte Beiträge des Jahreskolloquiums BVAu 2024. Berlin, Heidelberg: Springer Berlin Heidelberg.","mla":"Jasperneite, Jürgen, and Volker Lohweg, editors. Bildverarbeitung in der Automation: Ausgewählte Beiträge des Jahreskolloquiums BVAu 2024. Springer Berlin Heidelberg, 2024.","ufg":"Jasperneite, Jürgen/Lohweg, Volker: Bildverarbeitung in der Automation: Ausgewählte Beiträge des Jahreskolloquiums BVAu 2024, Bd. 19, Berlin, Heidelberg 2024 (Technologien für die intelligente Automation).","ama":"Jasperneite J, Lohweg V, eds. Bildverarbeitung in der Automation: Ausgewählte Beiträge des Jahreskolloquiums BVAu 2024. Vol 19. Springer Berlin Heidelberg; 2024.","van":"Jasperneite J, Lohweg V, editors. Bildverarbeitung in der Automation: Ausgewählte Beiträge des Jahreskolloquiums BVAu 2024. Berlin, Heidelberg: Springer Berlin Heidelberg; 2024. 63 p. (Technologien für die intelligente Automation; vol. 19).","din1505-2-1":"Jasperneite, J. ; Lohweg, V. (Hrsg.): Bildverarbeitung in der Automation: Ausgewählte Beiträge des Jahreskolloquiums BVAu 2024, Technologien für die intelligente Automation. Bd. 19. Berlin, Heidelberg : Springer Berlin Heidelberg, 2024","chicago-de":"Jasperneite, Jürgen und Volker Lohweg, Hrsg. 2024. Bildverarbeitung in der Automation: Ausgewählte Beiträge des Jahreskolloquiums BVAu 2024. Bd. 19. Technologien für die intelligente Automation. Berlin, Heidelberg: Springer Berlin Heidelberg.","short":"J. Jasperneite, V. Lohweg, eds., Bildverarbeitung in der Automation: Ausgewählte Beiträge des Jahreskolloquiums BVAu 2024, Springer Berlin Heidelberg, Berlin, Heidelberg, 2024."},"volume":19,"title":"Bildverarbeitung in der Automation: Ausgewählte Beiträge des Jahreskolloquiums BVAu 2024","page":"63","status":"public","year":"2024"},{"language":[{"iso":"eng"}],"keyword":["anorexia nervosa","inpatient treatment","physical activity","psychotherapy","restlessness","urge for movement"],"date_updated":"2026-03-27T08:10:14Z","date_created":"2026-03-25T14:39:29Z","publication_identifier":{"issn":["0276-3478","1098-108X"]},"publication":"International Journal of Eating Disorders","page":"2452-2460","status":"public","year":"2024","author":[{"orcid":"0000-0002-9529-2215","first_name":"Georg","full_name":"Halbeisen, Georg","id":"85780","last_name":"Halbeisen"},{"first_name":"Lina","full_name":"Amin, Lina","last_name":"Amin"},{"first_name":"Karsten","full_name":"Braks, Karsten","last_name":"Braks"},{"first_name":"Thomas J.","last_name":"Huber","full_name":"Huber, Thomas J."},{"first_name":"Georgios","full_name":"Paslakis, Georgios","last_name":"Paslakis"}],"volume":57,"citation":{"short":"G. Halbeisen, L. Amin, K. Braks, T.J. Huber, G. Paslakis, International Journal of Eating Disorders 57 (2024) 2452–2460.","chicago-de":"Halbeisen, Georg, Lina Amin, Karsten Braks, Thomas J. Huber und Georgios Paslakis. 2024. Acute Activity Urges Predict Lower Early Weight Gain During Inpatient Treatment for Anorexia Nervosa. International Journal of Eating Disorders 57, Nr. 12: 2452–2460. doi:10.1002/eat.24305, .","din1505-2-1":"Halbeisen, Georg ; Amin, Lina ; Braks, Karsten ; Huber, Thomas J. ; Paslakis, Georgios: Acute Activity Urges Predict Lower Early Weight Gain During Inpatient Treatment for Anorexia Nervosa. In: International Journal of Eating Disorders Bd. 57, Wiley (2024), Nr. 12, S. 2452–2460","van":"Halbeisen G, Amin L, Braks K, Huber TJ, Paslakis G. Acute Activity Urges Predict Lower Early Weight Gain During Inpatient Treatment for Anorexia Nervosa. International Journal of Eating Disorders. 2024;57(12):2452–60.","bjps":"Halbeisen G et al. (2024) Acute Activity Urges Predict Lower Early Weight Gain During Inpatient Treatment for Anorexia Nervosa. International Journal of Eating Disorders 57, 2452–2460.","havard":"G. Halbeisen, L. Amin, K. Braks, T.J. Huber, G. Paslakis, Acute Activity Urges Predict Lower Early Weight Gain During Inpatient Treatment for Anorexia Nervosa, International Journal of Eating Disorders. 57 (2024) 2452–2460.","mla":"Halbeisen, Georg, et al. “Acute Activity Urges Predict Lower Early Weight Gain During Inpatient Treatment for Anorexia Nervosa.” International Journal of Eating Disorders, vol. 57, no. 12, 2024, pp. 2452–60, https://doi.org/10.1002/eat.24305.","ufg":"Halbeisen, Georg u. a.: Acute Activity Urges Predict Lower Early Weight Gain During Inpatient Treatment for Anorexia Nervosa, in: International Journal of Eating Disorders 57 (2024), H. 12, S. 2452–2460.","apa":"Halbeisen, G., Amin, L., Braks, K., Huber, T. J., & Paslakis, G. (2024). Acute Activity Urges Predict Lower Early Weight Gain During Inpatient Treatment for Anorexia Nervosa. International Journal of Eating Disorders, 57(12), 2452–2460. https://doi.org/10.1002/eat.24305","chicago":"Halbeisen, Georg, Lina Amin, Karsten Braks, Thomas J. Huber, and Georgios Paslakis. “Acute Activity Urges Predict Lower Early Weight Gain During Inpatient Treatment for Anorexia Nervosa.” International Journal of Eating Disorders 57, no. 12 (2024): 2452–60. https://doi.org/10.1002/eat.24305.","ama":"Halbeisen G, Amin L, Braks K, Huber TJ, Paslakis G. Acute Activity Urges Predict Lower Early Weight Gain During Inpatient Treatment for Anorexia Nervosa. International Journal of Eating Disorders. 2024;57(12):2452-2460. doi:10.1002/eat.24305","ieee":"G. Halbeisen, L. Amin, K. Braks, T. J. Huber, and G. Paslakis, “Acute Activity Urges Predict Lower Early Weight Gain During Inpatient Treatment for Anorexia Nervosa,” International Journal of Eating Disorders, vol. 57, no. 12, pp. 2452–2460, 2024, doi: 10.1002/eat.24305."},"title":"Acute Activity Urges Predict Lower Early Weight Gain During Inpatient Treatment for Anorexia Nervosa","doi":"10.1002/eat.24305","_id":"13617","intvolume":" 57","user_id":"83781","type":"scientific_journal_article","publisher":"Wiley","abstract":[{"text":"Early weight gain is a primary goal in the treatment of anorexia nervosa (AN) and associated with more favorable discharge weights and clinical outcomes. Activity urges, that is, a motivational state to engage in activity, have been suspected to delay early weight gain, but their prognostic role remains barely explored. Here, we investigated whether acute (state‐like) activity urges at treatment onset would predict within‐person weight gain in patients with AN during the initial 2 weeks of inpatient treatment. Adults with AN from an inpatient unit (N = 53) completed an activity urges measure at treatment onset, and weight changes were monitored for the duration of their treatment. Regression analyses, controlling for admission body mass index and other patient variables (i.e., patient age and AN subtype), found that higher state activity urges were associated with lower initial weight gain. Mediation analyses showed that differences in early weight changes further linked higher activity urges at admission to lower discharge weights. An activity urge cutoff value of 2.76 for distinguishing between cases with optimal and suboptimal initial weight gain is proposed. We discuss potential mechanisms of the link between activity urges and early weight gain and the implications of activity urges as a prognostic factor for improving weight restoration during AN treatment.","lang":"eng"}],"issue":"12","department":[{"_id":"DEP1500"}],"publication_status":"published"},{"title":"Trends of Top IS Research by Region, Outlet, and Emergence: A Semi-Automated Literature Review","volume":14,"citation":{"ufg":"Guhr, Nadine u. a.: Trends of Top IS Research by Region, Outlet, and Emergence: A Semi-Automated Literature Review, in: Information 14 (2023), H. 2, S. 94.","mla":"Guhr, Nadine, et al. “Trends of Top IS Research by Region, Outlet, and Emergence: A Semi-Automated Literature Review.” Information, vol. 14, no. 2, 2023, p. 94, https://doi.org/10.3390/info14020094.","bjps":"Guhr N et al. (2023) Trends of Top IS Research by Region, Outlet, and Emergence: A Semi-Automated Literature Review. Information 14, 94.","havard":"N. Guhr, O. Werth, J. Passlick, M.H. Breitner, Trends of Top IS Research by Region, Outlet, and Emergence: A Semi-Automated Literature Review, Information. 14 (2023) 94.","van":"Guhr N, Werth O, Passlick J, Breitner MH. Trends of Top IS Research by Region, Outlet, and Emergence: A Semi-Automated Literature Review. Information. 2023;14(2):94.","chicago":"Guhr, Nadine, Oliver Werth, Jens Passlick, and Michael H. Breitner. “Trends of Top IS Research by Region, Outlet, and Emergence: A Semi-Automated Literature Review.” Information 14, no. 2 (2023): 94. https://doi.org/10.3390/info14020094.","apa":"Guhr, N., Werth, O., Passlick, J., & Breitner, M. H. (2023). Trends of Top IS Research by Region, Outlet, and Emergence: A Semi-Automated Literature Review. Information, 14(2), 94. https://doi.org/10.3390/info14020094","din1505-2-1":"Guhr, Nadine ; Werth, Oliver ; Passlick, Jens ; Breitner, Michael H.: Trends of Top IS Research by Region, Outlet, and Emergence: A Semi-Automated Literature Review. In: Information Bd. 14. Basel, MDPI (2023), Nr. 2, S. 94","chicago-de":"Guhr, Nadine, Oliver Werth, Jens Passlick und Michael H. Breitner. 2023. Trends of Top IS Research by Region, Outlet, and Emergence: A Semi-Automated Literature Review. Information 14, Nr. 2: 94. doi:10.3390/info14020094, .","short":"N. Guhr, O. Werth, J. Passlick, M.H. Breitner, Information 14 (2023) 94.","ama":"Guhr N, Werth O, Passlick J, Breitner MH. Trends of Top IS Research by Region, Outlet, and Emergence: A Semi-Automated Literature Review. Information. 2023;14(2):94. doi:10.3390/info14020094","ieee":"N. Guhr, O. Werth, J. Passlick, and M. H. Breitner, “Trends of Top IS Research by Region, Outlet, and Emergence: A Semi-Automated Literature Review,” Information, vol. 14, no. 2, p. 94, 2023, doi: 10.3390/info14020094."},"year":"2023","author":[{"first_name":"Nadine","last_name":"Guhr","full_name":"Guhr, Nadine","id":"77748","orcid":"0000-0001-8812-1488"},{"full_name":"Werth, Oliver","last_name":"Werth","first_name":"Oliver"},{"last_name":"Passlick","first_name":"Jens ","full_name":"Passlick, Jens "},{"full_name":"Breitner, Michael H.","last_name":"Breitner","first_name":"Michael H."}],"external_id":{"isi":["000939110600001"]},"page":"94","status":"public","date_created":"2023-02-06T08:00:51Z","publication":"Information","publication_identifier":{"issn":["2078-2489"]},"date_updated":"2025-06-25T13:12:07Z","language":[{"iso":"eng"}],"keyword":["global information systems research","research trends","research field","(semi-) automated literature review","latent semantic indexing"],"isi":"1","publication_status":"published","department":[{"_id":"DEP1523"}],"abstract":[{"lang":"eng","text":"Global trends towards the rapidly increasing use of information systems (IS) apply to the IS research domain and related publications. Nonetheless, investigations of trends in publication behavior and emergence as well as changes in IS research are usually narrowly focused. This article contributes to the growing number of articles published in the IS domain by analyzing the evolution of trends and major research fields as well as the regional distribution of publications in the AIS Senior Scholars' Basket of Eight (AIS Bo8) and the International Conference on Information Systems (ICIS), changes in publication behavior, and the emergence of as well as changes to IS research fields and trends. Our semi-automated literature review integrates scientific methods to support the review and classification of publications. Based on 6692 articles published in the ICIS proceedings and the AIS Bo8 journals in a period of 16 years, we elaborate the key characteristics of research development. Our contribution provides and interprets a contemporaneous account of contextual factors influencing the IS research domain. Thus, our study enhances understanding of the development of the IS research domain."}],"issue":"2","quality_controlled":"1","publisher":"MDPI","type":"scientific_journal_article","user_id":"83781","intvolume":" 14","place":"Basel","doi":"10.3390/info14020094","_id":"9422"},{"date_updated":"2023-06-29T12:45:11Z","date_created":"2023-06-26T11:03:16Z","publication_identifier":{"eissn":[" 2732-527X"]},"publication":"Proceedings of the International Conference on Engineering Design (ICED23)","language":[{"iso":"eng"}],"keyword":["Systems Engineering (SE)","Design methods","Case study","Design process"],"oa":"1","volume":3,"citation":{"ama":"Ammersdörfer T, Inkermann D, Müller J, et al. SUPPORTING SYSTEMS ENGINEERING ACTIVITIES BY ARTIFACT-ORIENTED DESCRIPTION AND SELECTION OF METHODS. Vol 3. Cambridge University Press; 2023:3245-3254. doi:https://doi.org/10.1017/pds.2023.325","ieee":"T. Ammersdörfer et al., SUPPORTING SYSTEMS ENGINEERING ACTIVITIES BY ARTIFACT-ORIENTED DESCRIPTION AND SELECTION OF METHODS, vol. 3. Cambridge University Press, 2023, pp. 3245–3254. doi: https://doi.org/10.1017/pds.2023.325.","din1505-2-1":"Ammersdörfer, Theresa ; Inkermann, David ; Müller, Johannes ; Mandel, Constantin ; Albers, Albert ; Tekaat, Julian ; Schierbaum, Anja ; Anacker, Harald ; u. a.: SUPPORTING SYSTEMS ENGINEERING ACTIVITIES BY ARTIFACT-ORIENTED DESCRIPTION AND SELECTION OF METHODS. Bd. 3 : Cambridge University Press, 2023","chicago-de":"Ammersdörfer, Theresa, David Inkermann, Johannes Müller, Constantin Mandel, Albert Albers, Julian Tekaat, Anja Schierbaum, u. a. 2023. SUPPORTING SYSTEMS ENGINEERING ACTIVITIES BY ARTIFACT-ORIENTED DESCRIPTION AND SELECTION OF METHODS. Proceedings of the International Conference on Engineering Design (ICED23). Bd. 3. Cambridge University Press. doi:https://doi.org/10.1017/pds.2023.325, .","short":"T. Ammersdörfer, D. Inkermann, J. Müller, C. Mandel, A. Albers, J. Tekaat, A. Schierbaum, H. Anacker, M. Bitzer, S. Kleiner, J.-P. Herrmann, P. Krause, SUPPORTING SYSTEMS ENGINEERING ACTIVITIES BY ARTIFACT-ORIENTED DESCRIPTION AND SELECTION OF METHODS, Cambridge University Press, 2023.","ufg":"Ammersdörfer, Theresa u. a.: SUPPORTING SYSTEMS ENGINEERING ACTIVITIES BY ARTIFACT-ORIENTED DESCRIPTION AND SELECTION OF METHODS, Bd. 3, o. O. 2023.","bjps":"Ammersdörfer T et al. (2023) SUPPORTING SYSTEMS ENGINEERING ACTIVITIES BY ARTIFACT-ORIENTED DESCRIPTION AND SELECTION OF METHODS. Cambridge University Press.","havard":"T. Ammersdörfer, D. Inkermann, J. Müller, C. Mandel, A. Albers, J. Tekaat, A. Schierbaum, H. Anacker, M. Bitzer, S. Kleiner, J.-P. Herrmann, P. Krause, SUPPORTING SYSTEMS ENGINEERING ACTIVITIES BY ARTIFACT-ORIENTED DESCRIPTION AND SELECTION OF METHODS, Cambridge University Press, 2023.","mla":"Ammersdörfer, Theresa, et al. “SUPPORTING SYSTEMS ENGINEERING ACTIVITIES BY ARTIFACT-ORIENTED DESCRIPTION AND SELECTION OF METHODS.” Proceedings of the International Conference on Engineering Design (ICED23), vol. 3, Cambridge University Press, 2023, pp. 3245–54, https://doi.org/10.1017/pds.2023.325.","van":"Ammersdörfer T, Inkermann D, Müller J, Mandel C, Albers A, Tekaat J, et al. SUPPORTING SYSTEMS ENGINEERING ACTIVITIES BY ARTIFACT-ORIENTED DESCRIPTION AND SELECTION OF METHODS. Vol. 3, Proceedings of the International Conference on Engineering Design (ICED23). Cambridge University Press; 2023.","chicago":"Ammersdörfer, Theresa, David Inkermann, Johannes Müller, Constantin Mandel, Albert Albers, Julian Tekaat, Anja Schierbaum, et al. SUPPORTING SYSTEMS ENGINEERING ACTIVITIES BY ARTIFACT-ORIENTED DESCRIPTION AND SELECTION OF METHODS. Proceedings of the International Conference on Engineering Design (ICED23). Vol. 3. Cambridge University Press, 2023. https://doi.org/10.1017/pds.2023.325.","apa":"Ammersdörfer, T., Inkermann, D., Müller, J., Mandel, C., Albers, A., Tekaat, J., Schierbaum, A., Anacker, H., Bitzer, M., Kleiner, S., Herrmann, J.-P., & Krause, P. (2023). SUPPORTING SYSTEMS ENGINEERING ACTIVITIES BY ARTIFACT-ORIENTED DESCRIPTION AND SELECTION OF METHODS. In Proceedings of the International Conference on Engineering Design (ICED23) (Vol. 3, pp. 3245–3254). Cambridge University Press. https://doi.org/10.1017/pds.2023.325"},"title":"SUPPORTING SYSTEMS ENGINEERING ACTIVITIES BY ARTIFACT-ORIENTED DESCRIPTION AND SELECTION OF METHODS","page":"3245-3254","status":"public","author":[{"first_name":"Theresa","last_name":"Ammersdörfer","full_name":"Ammersdörfer, Theresa"},{"last_name":"Inkermann","full_name":"Inkermann, David","first_name":"David"},{"first_name":"Johannes","full_name":"Müller, Johannes","last_name":"Müller"},{"last_name":"Mandel","first_name":"Constantin","full_name":"Mandel, Constantin"},{"first_name":"Albert","full_name":"Albers, Albert","last_name":"Albers"},{"last_name":"Tekaat","full_name":"Tekaat, Julian","first_name":"Julian"},{"first_name":"Anja","full_name":"Schierbaum, Anja","last_name":"Schierbaum"},{"last_name":"Anacker","first_name":"Harald","full_name":"Anacker, Harald"},{"first_name":"Michael","last_name":"Bitzer","full_name":"Bitzer, Michael"},{"full_name":"Kleiner, Sven","first_name":"Sven","last_name":"Kleiner"},{"first_name":"Jan-Phillip","last_name":"Herrmann","full_name":"Herrmann, Jan-Phillip","id":"75846"},{"first_name":"Patrik","full_name":"Krause, Patrik","last_name":"Krause"}],"main_file_link":[{"open_access":"1","url":"https://www.cambridge.org/core/journals/proceedings-of-the-design-society/article/supporting-systems-engineering-activities-by-artifactoriented-description-and-selection-of-methods/E80825E7E1B5D70F784E978A6119295D"}],"year":"2023","user_id":"15514","intvolume":" 3","type":"conference_editor_article","doi":"https://doi.org/10.1017/pds.2023.325","_id":"10012","publication_status":"published","quality_controlled":"1","publisher":"Cambridge University Press","conference":{"location":"Bordeaux, Frankreich","name":"24th International Conference on Engineering Design (ICED 2023)","end_date":"2023-07-28","start_date":"2023-07-24"},"department":[{"_id":"DEP7020"}],"abstract":[{"lang":"eng","text":"Systems Engineering (SE) is becoming increasingly relevant in industrial application since more stakeholders are involved in engineering activities. To implement SE, companies have to adapt existing engineering processes and methods. This adaption requires knowledge about new methods as well as their integration into the engineering activities. In order to ensure goal-oriented identification of methods for different SE activities in this contribution an action field profile and the Systems Engineering Method Matrix are proposed. The development of both tools is driven by the assumption that most SE activities and methods can be described based on the artefacts the deliver. In order to get feedback about the proposed tools, semi-structured interviews with two industry partners were conducted, focussing on the tool's usability. These interviews underline the basic usability of the tools and their support to identify SE activities to be supported by (new) methods. Moreover, requirements for further development and adaption are derived from the interviews."}]},{"citation":{"short":"J. Wörner, H. Dörksen, M. Pein-Hackelbusch, Key Indicators for the Discrimination of Wines by Electronic Noses, 2023.","chicago-de":"Wörner, Julius, Helene Dörksen und Miriam Pein-Hackelbusch. 2023. Key Indicators for the Discrimination of Wines by Electronic Noses. 2023 IEEE 21st International Conference on Industrial Informatics (INDIN). doi:https://doi.org/10.1109/INDIN51400.2023.10217912, .","din1505-2-1":"Wörner, Julius ; Dörksen, Helene ; Pein-Hackelbusch, Miriam: Key Indicators for the Discrimination of Wines by Electronic Noses, 2023","ieee":"J. Wörner, H. Dörksen, and M. Pein-Hackelbusch, Key Indicators for the Discrimination of Wines by Electronic Noses. 2023. doi: https://doi.org/10.1109/INDIN51400.2023.10217912.","apa":"Wörner, J., Dörksen, H., & Pein-Hackelbusch, M. (2023). Key Indicators for the Discrimination of Wines by Electronic Noses. In 2023 IEEE 21st International Conference on Industrial Informatics (INDIN). 21st International Conference on Industrial Informatics (INDIN), Lemgo. https://doi.org/10.1109/INDIN51400.2023.10217912","chicago":"Wörner, Julius, Helene Dörksen, and Miriam Pein-Hackelbusch. Key Indicators for the Discrimination of Wines by Electronic Noses. 2023 IEEE 21st International Conference on Industrial Informatics (INDIN), 2023. https://doi.org/10.1109/INDIN51400.2023.10217912.","ama":"Wörner J, Dörksen H, Pein-Hackelbusch M. Key Indicators for the Discrimination of Wines by Electronic Noses.; 2023. doi:https://doi.org/10.1109/INDIN51400.2023.10217912","van":"Wörner J, Dörksen H, Pein-Hackelbusch M. Key Indicators for the Discrimination of Wines by Electronic Noses. 2023 IEEE 21st International Conference on Industrial Informatics (INDIN). 2023.","havard":"J. Wörner, H. Dörksen, M. Pein-Hackelbusch, Key Indicators for the Discrimination of Wines by Electronic Noses, 2023.","mla":"Wörner, Julius, et al. “Key Indicators for the Discrimination of Wines by Electronic Noses.” 2023 IEEE 21st International Conference on Industrial Informatics (INDIN), 2023, https://doi.org/10.1109/INDIN51400.2023.10217912.","bjps":"Wörner J, Dörksen H and Pein-Hackelbusch M (2023) Key Indicators for the Discrimination of Wines by Electronic Noses. .","ufg":"Wörner, Julius/Dörksen, Helene/Pein-Hackelbusch, Miriam: Key Indicators for the Discrimination of Wines by Electronic Noses, o. O. 2023."},"publication_status":"published","title":"Key Indicators for the Discrimination of Wines by Electronic Noses","status":"public","author":[{"first_name":"Julius","full_name":"Wörner, Julius","id":"79011","last_name":"Wörner"},{"full_name":"Dörksen, Helene","first_name":"Helene","last_name":"Dörksen","id":"46416"},{"last_name":"Pein-Hackelbusch","full_name":"Pein-Hackelbusch, Miriam","id":"64952","first_name":"Miriam","orcid":"0000-0002-7920-0595"}],"year":"2023","main_file_link":[{"open_access":"1","url":"https://ieeexplore.ieee.org/document/10217912"}],"department":[{"_id":"DEP4000"},{"_id":"DEP4028"}],"conference":{"name":"21st International Conference on Industrial Informatics (INDIN)","location":"Lemgo","start_date":"2023-07-18","end_date":"2023-07-20"},"abstract":[{"text":"In the food industry, and especially in wines as products thereof, ethanol and sulfur dioxide play an equally important role. Both substances are important wine quality characteristics as they influence the taste and odor. As both substances comprise volatile matter, electronic noses should be applicable to discriminate the different qualities of wines. Our study investigates the influence of alcohol and sulfur dioxide on the discrimination ability of wines (especially those of the same grape variety) using two different electronic nose systems. One system is equipped with metal oxide sensors and the other with quartz crystal microbalance sensors. Contrary to indications in literature, where the alcohol content is discussed to have a large influence on e-nose results, it was shown that a difference of 1 % ethanol was not sufficient to allow accurate discrimination using Linear Discriminant Analysis by any system. On the positive side, the analyzed concentrations of ethanol (about 12 %) did not superimpose other volatile information. So difference in sulfur dioxide content gave an accuracy for sample discrimination of up to 90.6 % with MOS nose. Thus, we are so far partially able to discriminate wines with electronic noses based on their volatile imprint.","lang":"eng"}],"user_id":"64952","date_updated":"2025-03-13T13:48:05Z","publication":"2023 IEEE 21st International Conference on Industrial Informatics (INDIN)","type":"conference_speech","date_created":"2023-09-14T05:50:47Z","keyword":["Ethanol","Pipelines","Metals","Nose","Electronic noses","Sensor systems","Sensors","Quartz crystals","Linear discriminant analysis","Sulfur"],"language":[{"iso":"eng"}],"_id":"10326","doi":"https://doi.org/10.1109/INDIN51400.2023.10217912","oa":"1"},{"type":"conference_editor_article","user_id":"83781","_id":"10787","doi":"10.1109/INDIN51400.2023.10217913","place":"[Piscataway, NJ]","publication_status":"published","abstract":[{"lang":"eng","text":"Cyber-physical production systems have emerged with the rise of Industry 4.0 in different industrial fields. Especially the food sector, where inhomogeneous input products like beer/yeast suspensions with different qualities and properties have yet slowed down automation, has potential for this evolution. This contribution presents optimization methods for a dynamical cross-flow filtration plant which is driven by an advanced control concept in combination with data driven product monitoring via inline near infrared spectroscopy (NIR) in order to improve energy savings and filtration performance. Using a hierarchical control and optimization structure, the non stationary batch process is steered towards a high production rate with low energy consumption for a variety of different input products."}],"department":[{"_id":"DEP4018"},{"_id":"DEP1308"},{"_id":"DEP4028"}],"conference":{"end_date":"2023-07-20","start_date":"2023-07-17","name":"21st International Conference on Industrial Informatics ; INDIN 2023","location":"Lemgo"},"publisher":"IEEE","publication":"2023 IEEE 21st International Conference on Industrial Informatics (INDIN)","publication_identifier":{"isbn":["978-1-6654-9314-7 "],"eisbn":["978-1-6654-9313-0"],"issn":["1935-4576"]},"date_created":"2023-11-21T08:04:41Z","corporate_editor":["Institute of Electrical and Electronics Engineers "],"editor":[{"first_name":"Jürgen","last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen"},{"id":"1710","full_name":"Wisniewski, Lukasz","first_name":"Lukasz","last_name":"Wisniewski"},{"full_name":"Fung Man, Kim","last_name":"Fung Man","first_name":"Kim"}],"date_updated":"2025-06-26T07:48:22Z","keyword":["Spectroscopy","Production systems","Filtration","Velocity control","Optimization methods","Cyber-physical systems","Nonhomogeneous media"],"language":[{"iso":"eng"}],"title":"Holistic optimization of a dynamic cross-flow filtration process towards a cyber-physical system","citation":{"ieee":"J. Tebbe, T. Pawlik, M. Trilling-Haasler, J. Löbner, M. Lange-Hegermann, and J. Schneider, Holistic optimization of a dynamic cross-flow filtration process towards a cyber-physical system. [Piscataway, NJ]: IEEE, 2023, pp. 1–7. doi: 10.1109/INDIN51400.2023.10217913.","ama":"Tebbe J, Pawlik T, Trilling-Haasler M, Löbner J, Lange-Hegermann M, Schneider J. Holistic Optimization of a Dynamic Cross-Flow Filtration Process towards a Cyber-Physical System. (Jasperneite J, Wisniewski L, Fung Man K, Institute of Electrical and Electronics Engineers , eds.). IEEE; 2023:1-7. doi:10.1109/INDIN51400.2023.10217913","apa":"Tebbe, J., Pawlik, T., Trilling-Haasler, M., Löbner, J., Lange-Hegermann, M., & Schneider, J. (2023). Holistic optimization of a dynamic cross-flow filtration process towards a cyber-physical system. In J. Jasperneite, L. Wisniewski, K. Fung Man, & Institute of Electrical and Electronics Engineers (Eds.), 2023 IEEE 21st International Conference on Industrial Informatics (INDIN) (pp. 1–7). IEEE. https://doi.org/10.1109/INDIN51400.2023.10217913","chicago":"Tebbe, Jörn, Thomas Pawlik, Marc Trilling-Haasler, Jannis Löbner, Markus Lange-Hegermann, and Jan Schneider. Holistic Optimization of a Dynamic Cross-Flow Filtration Process towards a Cyber-Physical System. Edited by Jürgen Jasperneite, Lukasz Wisniewski, Kim Fung Man, and Institute of Electrical and Electronics Engineers . 2023 IEEE 21st International Conference on Industrial Informatics (INDIN). [Piscataway, NJ]: IEEE, 2023. https://doi.org/10.1109/INDIN51400.2023.10217913.","van":"Tebbe J, Pawlik T, Trilling-Haasler M, Löbner J, Lange-Hegermann M, Schneider J. Holistic optimization of a dynamic cross-flow filtration process towards a cyber-physical system. Jasperneite J, Wisniewski L, Fung Man K, Institute of Electrical and Electronics Engineers , editors. 2023 IEEE 21st International Conference on Industrial Informatics (INDIN). [Piscataway, NJ]: IEEE; 2023.","havard":"J. Tebbe, T. Pawlik, M. Trilling-Haasler, J. Löbner, M. Lange-Hegermann, J. Schneider, Holistic optimization of a dynamic cross-flow filtration process towards a cyber-physical system, IEEE, [Piscataway, NJ], 2023.","mla":"Tebbe, Jörn, et al. “Holistic Optimization of a Dynamic Cross-Flow Filtration Process towards a Cyber-Physical System.” 2023 IEEE 21st International Conference on Industrial Informatics (INDIN), edited by Jürgen Jasperneite et al., IEEE, 2023, pp. 1–7, https://doi.org/10.1109/INDIN51400.2023.10217913.","bjps":"Tebbe J et al. (2023) Holistic Optimization of a Dynamic Cross-Flow Filtration Process towards a Cyber-Physical System, Jasperneite J et al. (eds). [Piscataway, NJ]: IEEE.","ufg":"Tebbe, Jörn u. a.: Holistic optimization of a dynamic cross-flow filtration process towards a cyber-physical system, hg. von Jasperneite, Jürgen u. a., [Piscataway, NJ] 2023.","short":"J. Tebbe, T. Pawlik, M. Trilling-Haasler, J. Löbner, M. Lange-Hegermann, J. Schneider, Holistic Optimization of a Dynamic Cross-Flow Filtration Process towards a Cyber-Physical System, IEEE, [Piscataway, NJ], 2023.","din1505-2-1":"Tebbe, Jörn ; Pawlik, Thomas ; Trilling-Haasler, Marc ; Löbner, Jannis ; Lange-Hegermann, Markus ; Schneider, Jan ; Jasperneite, J. ; Wisniewski, L. ; Fung Man, K. ; Institute of Electrical and Electronics Engineers (Hrsg.): Holistic optimization of a dynamic cross-flow filtration process towards a cyber-physical system. [Piscataway, NJ] : IEEE, 2023","chicago-de":"Tebbe, Jörn, Thomas Pawlik, Marc Trilling-Haasler, Jannis Löbner, Markus Lange-Hegermann und Jan Schneider. 2023. Holistic optimization of a dynamic cross-flow filtration process towards a cyber-physical system. Hg. von Jürgen Jasperneite, Lukasz Wisniewski, Kim Fung Man, und Institute of Electrical and Electronics Engineers . 2023 IEEE 21st International Conference on Industrial Informatics (INDIN). [Piscataway, NJ]: IEEE. doi:10.1109/INDIN51400.2023.10217913, ."},"author":[{"first_name":"Jörn","last_name":"Tebbe","id":"79072","full_name":"Tebbe, Jörn"},{"full_name":"Pawlik, Thomas","first_name":"Thomas","id":"58915","last_name":"Pawlik"},{"last_name":"Trilling-Haasler","first_name":"Marc","full_name":"Trilling-Haasler, Marc","id":"81622","orcid":"0000-0002-3685-6383"},{"last_name":"Löbner","id":"74097","full_name":"Löbner, Jannis","first_name":"Jannis"},{"id":"71761","first_name":"Markus","full_name":"Lange-Hegermann, Markus","last_name":"Lange-Hegermann"},{"first_name":"Jan","full_name":"Schneider, Jan","id":"13209","last_name":"Schneider","orcid":"0000-0001-6401-8873"}],"year":"2023","status":"public","page":"1-7"},{"date_created":"2025-04-16T07:27:52Z","publication":" Applied Sciences : open access journal","publication_identifier":{"issn":["2076-3417"]},"date_updated":"2025-06-26T07:50:56Z","language":[{"iso":"eng"}],"keyword":["machine learning","online algorithms","cyber-physical production systems","surrogate-based optimization"],"title":"Online Machine Learning and Surrogate-Model-Based Optimization for Improved Production Processes Using a Cognitive Architecture","citation":{"ieee":"A. Hinterleitner et al., “Online Machine Learning and Surrogate-Model-Based Optimization for Improved Production Processes Using a Cognitive Architecture,” Applied Sciences : open access journal, vol. 13, no. 20, Art. no. 11506, 2023, doi: 10.3390/app132011506.","ama":"Hinterleitner A, Schulz R, Hans L, et al. Online Machine Learning and Surrogate-Model-Based Optimization for Improved Production Processes Using a Cognitive Architecture. Applied Sciences : open access journal. 2023;13(20). doi:10.3390/app132011506","chicago-de":"Hinterleitner, Alexander, Richard Schulz, Lukas Hans, Aleksandr Subbotin, Nils Barthel, Noah Pütz, Martin Rosellen, Thomas Bartz-Beielstein, Christoph Geng und Phillip Priss. 2023. Online Machine Learning and Surrogate-Model-Based Optimization for Improved Production Processes Using a Cognitive Architecture. Applied Sciences : open access journal 13, Nr. 20. doi:10.3390/app132011506, .","din1505-2-1":"Hinterleitner, Alexander ; Schulz, Richard ; Hans, Lukas ; Subbotin, Aleksandr ; Barthel, Nils ; Pütz, Noah ; Rosellen, Martin ; Bartz-Beielstein, Thomas ; u. a.: Online Machine Learning and Surrogate-Model-Based Optimization for Improved Production Processes Using a Cognitive Architecture. In: Applied Sciences : open access journal Bd. 13. Basel, MDPI AG (2023), Nr. 20","short":"A. Hinterleitner, R. Schulz, L. Hans, A. Subbotin, N. Barthel, N. Pütz, M. Rosellen, T. Bartz-Beielstein, C. Geng, P. Priss, Applied Sciences : Open Access Journal 13 (2023).","chicago":"Hinterleitner, Alexander, Richard Schulz, Lukas Hans, Aleksandr Subbotin, Nils Barthel, Noah Pütz, Martin Rosellen, Thomas Bartz-Beielstein, Christoph Geng, and Phillip Priss. “Online Machine Learning and Surrogate-Model-Based Optimization for Improved Production Processes Using a Cognitive Architecture.” Applied Sciences : Open Access Journal 13, no. 20 (2023). https://doi.org/10.3390/app132011506.","apa":"Hinterleitner, A., Schulz, R., Hans, L., Subbotin, A., Barthel, N., Pütz, N., Rosellen, M., Bartz-Beielstein, T., Geng, C., & Priss, P. (2023). Online Machine Learning and Surrogate-Model-Based Optimization for Improved Production Processes Using a Cognitive Architecture. Applied Sciences : Open Access Journal, 13(20), Article 11506. https://doi.org/10.3390/app132011506","mla":"Hinterleitner, Alexander, et al. “Online Machine Learning and Surrogate-Model-Based Optimization for Improved Production Processes Using a Cognitive Architecture.” Applied Sciences : Open Access Journal, vol. 13, no. 20, 11506, 2023, https://doi.org/10.3390/app132011506.","havard":"A. Hinterleitner, R. Schulz, L. Hans, A. Subbotin, N. Barthel, N. Pütz, M. Rosellen, T. Bartz-Beielstein, C. Geng, P. Priss, Online Machine Learning and Surrogate-Model-Based Optimization for Improved Production Processes Using a Cognitive Architecture, Applied Sciences : Open Access Journal. 13 (2023).","bjps":"Hinterleitner A et al. (2023) Online Machine Learning and Surrogate-Model-Based Optimization for Improved Production Processes Using a Cognitive Architecture. Applied Sciences : open access journal 13.","ufg":"Hinterleitner, Alexander u. a.: Online Machine Learning and Surrogate-Model-Based Optimization for Improved Production Processes Using a Cognitive Architecture, in: Applied Sciences : open access journal 13 (2023), H. 20.","van":"Hinterleitner A, Schulz R, Hans L, Subbotin A, Barthel N, Pütz N, et al. Online Machine Learning and Surrogate-Model-Based Optimization for Improved Production Processes Using a Cognitive Architecture. Applied Sciences : open access journal. 2023;13(20)."},"volume":13,"year":"2023","author":[{"last_name":"Hinterleitner","full_name":"Hinterleitner, Alexander","first_name":"Alexander"},{"last_name":"Schulz","full_name":"Schulz, Richard","first_name":"Richard"},{"last_name":"Hans","first_name":"Lukas","full_name":"Hans, Lukas"},{"last_name":"Subbotin","full_name":"Subbotin, Aleksandr","first_name":"Aleksandr"},{"first_name":"Nils","full_name":"Barthel, Nils","last_name":"Barthel"},{"full_name":"Pütz, Noah","last_name":"Pütz","first_name":"Noah"},{"last_name":"Rosellen","full_name":"Rosellen, Martin","first_name":"Martin"},{"first_name":"Thomas","full_name":"Bartz-Beielstein, Thomas","last_name":"Bartz-Beielstein"},{"first_name":"Christoph","last_name":"Geng","full_name":"Geng, Christoph","id":"61408"},{"first_name":"Phillip","full_name":"Priss, Phillip","last_name":"Priss"}],"external_id":{"isi":["001096019200001"]},"status":"public","type":"scientific_journal_article","user_id":"83781","intvolume":" 13","place":"Basel","article_number":"11506","doi":"10.3390/app132011506","_id":"12806","isi":"1","publication_status":"published","department":[{"_id":"DEP5023"}],"issue":"20","abstract":[{"text":"Cyber-Physical Systems (CPS) play an essential role in today’s production processes, leveraging Artificial Intelligence (AI) to enhance operations such as optimization, anomaly detection, and predictive maintenance. This article reviews a cognitive architecture for Artificial Intelligence, which has been developed to establish a standard framework for integrating AI solutions into existing production processes. Given that machines in these processes continuously generate large streams of data, Online Machine Learning (OML) is identified as a crucial extension to the existing architecture. To substantiate this claim, real-world experiments using a slitting machine are conducted, to compare the performance of OML to traditional Batch Machine Learning. The assessment of contemporary OML algorithms using a real production system is a fundamental innovation in this research. The evaluations clearly indicate that OML adds significant value to CPS, and it is strongly recommended as an extension of related architectures, such as the cognitive architecture for AI discussed in this article. Additionally, surrogate-model-based optimization is employed, to determine the optimal hyperparameter settings for the corresponding OML algorithms, aiming to achieve peak performance in their respective tasks.","lang":"eng"}],"publisher":"MDPI AG"},{"author":[{"last_name":"Rubart","first_name":"Jessica","id":"45672","full_name":"Rubart, Jessica"},{"full_name":"Atzenbeck, Claus","last_name":"Atzenbeck","first_name":"Claus"}],"year":"2023","conference":{"end_date":"2023-09-08","start_date":"2023-09-04","name":"34th ACM Conference on Hypertext and Social Media","location":"Rome, Italy"},"department":[{"_id":"DEP8000"}],"abstract":[{"lang":"eng","text":"HUMAN 2023 is the 6th workshop of a series for the ACM Hypertext conferences. The HUMAN workshop has a strong focus on the user and thus is complementary to the strong machine analytics research direction that could be experienced in previous conferences.The user-centric view on hypertext not only includes user interfaces and interaction, but also discussions about hypertext application domains as well as human-centered AI. Furthermore, the workshop raises the question of how original hypertext ideas (e. g., Doug Engelbart’s \"augmenting human intellect\" [7] or Jeff Conklin’s \"hypertext as a computer-based medium for thinking and communication\" [6]) can improve today’s hypertext systems."}],"status":"public","publisher":"ACM","series_title":"HT '23","title":"HUMAN’23: 6th Workshop on Human Factors in Hypertext","citation":{"mla":"Rubart, Jessica, and Claus Atzenbeck. “HUMAN’23: 6th Workshop on Human Factors in Hypertext.” Proceedings of the 34th ACM Conference on Hypertext and Social Media, ACM, 2023, https://doi.org/10.1145/3603163.3610576.","bjps":"Rubart J and Atzenbeck C (2023) HUMAN’23: 6th Workshop on Human Factors in Hypertext. New York, NY, USA: ACM.","havard":"J. Rubart, C. Atzenbeck, HUMAN’23: 6th Workshop on Human Factors in Hypertext, ACM, New York, NY, USA, 2023.","ufg":"Rubart, Jessica/Atzenbeck, Claus: HUMAN’23: 6th Workshop on Human Factors in Hypertext, New York, NY, USA 2023 (HT ’23).","van":"Rubart J, Atzenbeck C. HUMAN’23: 6th Workshop on Human Factors in Hypertext. Proceedings of the 34th ACM Conference on Hypertext and Social Media. New York, NY, USA: ACM; 2023. (HT ’23).","chicago":"Rubart, Jessica, and Claus Atzenbeck. HUMAN’23: 6th Workshop on Human Factors in Hypertext. Proceedings of the 34th ACM Conference on Hypertext and Social Media. HT ’23. New York, NY, USA: ACM, 2023. https://doi.org/10.1145/3603163.3610576.","apa":"Rubart, J., & Atzenbeck, C. (2023). HUMAN’23: 6th Workshop on Human Factors in Hypertext. In Proceedings of the 34th ACM Conference on Hypertext and Social Media. 34th ACM Conference on Hypertext and Social Media, Rome, Italy. ACM. https://doi.org/10.1145/3603163.3610576","din1505-2-1":"Rubart, Jessica ; Atzenbeck, Claus: HUMAN’23: 6th Workshop on Human Factors in Hypertext, HT ’23. New York, NY, USA : ACM, 2023","chicago-de":"Rubart, Jessica und Claus Atzenbeck. 2023. HUMAN’23: 6th Workshop on Human Factors in Hypertext. Proceedings of the 34th ACM Conference on Hypertext and Social Media. HT ’23. New York, NY, USA: ACM. doi:10.1145/3603163.3610576, .","short":"J. Rubart, C. Atzenbeck, HUMAN’23: 6th Workshop on Human Factors in Hypertext, ACM, New York, NY, USA, 2023.","ama":"Rubart J, Atzenbeck C. HUMAN’23: 6th Workshop on Human Factors in Hypertext. ACM; 2023. doi:10.1145/3603163.3610576","ieee":"J. Rubart and C. Atzenbeck, HUMAN’23: 6th Workshop on Human Factors in Hypertext. New York, NY, USA: ACM, 2023. doi: 10.1145/3603163.3610576."},"publication_status":"published","keyword":["user interfaces","information structuring","decision making","human-centered AI","cognitive aspects","scientific community","digital humanities","user interaction","human factors","user-centric","annotation","adaptive hypertext","hypermedia","collaboration","information systems","augmentation","hypertext","communication","intercultural aspects"],"place":"New York, NY, USA","language":[{"iso":"eng"}],"_id":"12994","doi":"10.1145/3603163.3610576","publication_identifier":{"isbn":["979-8-4007-0232-7"]},"publication":"Proceedings of the 34th ACM Conference on Hypertext and Social Media","type":"conference_editor_article","date_created":"2025-06-18T13:24:37Z","user_id":"83781","date_updated":"2025-06-18T13:29:06Z"},{"type":"conference_editor_article","user_id":"83781","doi":"10.1109/indin51400.2023.10218157","_id":"13010","place":"[Piscataway, NJ]","publication_status":"published","abstract":[{"lang":"eng","text":"Especially in highly interdisciplinary fields such as automation engineering, contemporary programming education with tailored assignments and individual feedback is a major challenge for educational institutions due to the increasing number of students per teacher and the ever-increasing demand for computer science professionals. To address this gap, we present ”KIAAA” an AI Assistant for Automation Engineering Teaching, a work-in-progress approach for an integrated, customized, and AI-based learning support system for automation and programming courses based on instructor-defined course objectives. Thereby in the KIAAA system, the individual knowledge level of the students is determined and individually tailored virtual learning scenarios are generated based on the knowledge and learning profile of the students. These are iteratively adapted based on the answers given. To achieve this, KIAAA uses several AI components, a hybrid rule-based scenario generation component, a Help-DKT-based cognitive model, and a solution assessor that uses a combination of traditional code analysis methods and AI-based analyses methods for automated programming task assessment. These components are the main parts of KIAAA to generate customized programming scenarios as well as visualization and simulation based on a modern game and physics engine."}],"conference":{"name":"21st International Conference on Industrial Informatics (INDIN)","location":"Lemgo","start_date":"2023-07-18","end_date":"2023-07-20"},"department":[{"_id":"DEP7022"},{"_id":"DEP1306"},{"_id":"DEP7001"}],"quality_controlled":"1","publisher":"IEEE","date_created":"2025-06-24T09:24:47Z","publication":"2023 IEEE 21st International Conference on Industrial Informatics (INDIN)","publication_identifier":{"eisbn":["978-1-6654-9313-0"],"isbn":["978-1-6654-9314-7"]},"editor":[{"last_name":"Jasperneite","id":"1899","full_name":"Jasperneite, Jürgen","first_name":"Jürgen"}],"corporate_editor":["IEEE International Conference on Industrial Informatics ","Institute of Electrical and Electronics Engineers"],"date_updated":"2025-06-24T09:38:24Z","language":[{"iso":"eng"}],"keyword":["Visualization","Automation","Education","Games","Hybrid power systems","Task analysis","Artificial intelligence"],"title":"KIAAA: An AI Assistant for Teaching Programming in the Field of Automation","citation":{"ama":"Eilermann S, Wehmeier L, Niggemann O, Deuter A. KIAAA: An AI Assistant for Teaching Programming in the Field of Automation. (Jasperneite J, IEEE International Conference on Industrial Informatics , Institute of Electrical and Electronics Engineers, eds.). IEEE; 2023. doi:10.1109/indin51400.2023.10218157","ieee":"S. Eilermann, L. Wehmeier, O. Niggemann, and A. Deuter, KIAAA: An AI Assistant for Teaching Programming in the Field of Automation. [Piscataway, NJ]: IEEE, 2023. doi: 10.1109/indin51400.2023.10218157.","short":"S. Eilermann, L. Wehmeier, O. Niggemann, A. Deuter, KIAAA: An AI Assistant for Teaching Programming in the Field of Automation, IEEE, [Piscataway, NJ], 2023.","din1505-2-1":"Eilermann, Sebastian ; Wehmeier, Leon ; Niggemann, Oliver ; Deuter, Andreas ; Jasperneite, J. ; IEEE International Conference on Industrial Informatics ; Institute of Electrical and Electronics Engineers (Hrsg.): KIAAA: An AI Assistant for Teaching Programming in the Field of Automation. [Piscataway, NJ] : IEEE, 2023","chicago-de":"Eilermann, Sebastian, Leon Wehmeier, Oliver Niggemann und Andreas Deuter. 2023. KIAAA: An AI Assistant for Teaching Programming in the Field of Automation. Hg. von Jürgen Jasperneite, IEEE International Conference on Industrial Informatics , und Institute of Electrical and Electronics Engineers. 2023 IEEE 21st International Conference on Industrial Informatics (INDIN). [Piscataway, NJ]: IEEE. doi:10.1109/indin51400.2023.10218157, .","van":"Eilermann S, Wehmeier L, Niggemann O, Deuter A. KIAAA: An AI Assistant for Teaching Programming in the Field of Automation. Jasperneite J, IEEE International Conference on Industrial Informatics , Institute of Electrical and Electronics Engineers, editors. 2023 IEEE 21st International Conference on Industrial Informatics (INDIN). [Piscataway, NJ]: IEEE; 2023.","ufg":"Eilermann, Sebastian u. a.: KIAAA: An AI Assistant for Teaching Programming in the Field of Automation, hg. von Jasperneite, Jürgen/IEEE International Conference on Industrial Informatics , Institute of Electrical and Electronics Engineers, [Piscataway, NJ] 2023.","mla":"Eilermann, Sebastian, et al. “KIAAA: An AI Assistant for Teaching Programming in the Field of Automation.” 2023 IEEE 21st International Conference on Industrial Informatics (INDIN), edited by Jürgen Jasperneite et al., IEEE, 2023, https://doi.org/10.1109/indin51400.2023.10218157.","havard":"S. Eilermann, L. Wehmeier, O. Niggemann, A. Deuter, KIAAA: An AI Assistant for Teaching Programming in the Field of Automation, IEEE, [Piscataway, NJ], 2023.","bjps":"Eilermann S et al. (2023) KIAAA: An AI Assistant for Teaching Programming in the Field of Automation, Jasperneite J, IEEE International Conference on Industrial Informatics , and Institute of Electrical and Electronics Engineers (eds). [Piscataway, NJ]: IEEE.","apa":"Eilermann, S., Wehmeier, L., Niggemann, O., & Deuter, A. (2023). KIAAA: An AI Assistant for Teaching Programming in the Field of Automation. In J. Jasperneite, IEEE International Conference on Industrial Informatics , & Institute of Electrical and Electronics Engineers (Eds.), 2023 IEEE 21st International Conference on Industrial Informatics (INDIN). IEEE. https://doi.org/10.1109/indin51400.2023.10218157","chicago":"Eilermann, Sebastian, Leon Wehmeier, Oliver Niggemann, and Andreas Deuter. KIAAA: An AI Assistant for Teaching Programming in the Field of Automation. Edited by Jürgen Jasperneite, IEEE International Conference on Industrial Informatics , and Institute of Electrical and Electronics Engineers. 2023 IEEE 21st International Conference on Industrial Informatics (INDIN). [Piscataway, NJ]: IEEE, 2023. https://doi.org/10.1109/indin51400.2023.10218157."},"author":[{"last_name":"Eilermann","full_name":"Eilermann, Sebastian","first_name":"Sebastian"},{"first_name":"Leon","id":"81257","last_name":"Wehmeier","full_name":"Wehmeier, Leon"},{"first_name":"Oliver","full_name":"Niggemann, Oliver","last_name":"Niggemann"},{"full_name":"Deuter, Andreas","id":"62088","first_name":"Andreas","last_name":"Deuter","orcid":"0000-0002-6529-6215"}],"year":"2023","status":"public"},{"status":"public","page":"104-111","year":"2023","author":[{"id":"62068","first_name":"Nils","last_name":"Beckmann","full_name":"Beckmann, Nils","orcid":"0000-0003-4337-7978"}],"volume":46,"citation":{"ieee":"N. Beckmann, “Automatisierte, randomisierte Online-Programmierprüfung mit geringem, kurzzeitigem Datenverkehr,” Informatik Spektrum, vol. 46, no. 2, pp. 104–111, 2023, doi: 10.1007/s00287-023-01534-y.","apa":"Beckmann, N. (2023). Automatisierte, randomisierte Online-Programmierprüfung mit geringem, kurzzeitigem Datenverkehr. Informatik Spektrum, 46(2), 104–111. https://doi.org/10.1007/s00287-023-01534-y","chicago":"Beckmann, Nils. “Automatisierte, randomisierte Online-Programmierprüfung mit geringem, kurzzeitigem Datenverkehr.” Informatik Spektrum 46, no. 2 (2023): 104–11. https://doi.org/10.1007/s00287-023-01534-y.","ama":"Beckmann N. Automatisierte, randomisierte Online-Programmierprüfung mit geringem, kurzzeitigem Datenverkehr. Informatik Spektrum. 2023;46(2):104-111. doi:10.1007/s00287-023-01534-y","van":"Beckmann N. Automatisierte, randomisierte Online-Programmierprüfung mit geringem, kurzzeitigem Datenverkehr. Informatik Spektrum. 2023;46(2):104–11.","mla":"Beckmann, Nils. “Automatisierte, randomisierte Online-Programmierprüfung mit geringem, kurzzeitigem Datenverkehr.” Informatik Spektrum, vol. 46, no. 2, 2023, pp. 104–11, https://doi.org/10.1007/s00287-023-01534-y.","havard":"N. Beckmann, Automatisierte, randomisierte Online-Programmierprüfung mit geringem, kurzzeitigem Datenverkehr, Informatik Spektrum. 46 (2023) 104–111.","bjps":"Beckmann N (2023) Automatisierte, randomisierte Online-Programmierprüfung mit geringem, kurzzeitigem Datenverkehr. Informatik Spektrum 46, 104–111.","ufg":"Beckmann, Nils: Automatisierte, randomisierte Online-Programmierprüfung mit geringem, kurzzeitigem Datenverkehr, in: Informatik Spektrum 46 (2023), H. 2, S. 104–111.","short":"N. Beckmann, Informatik Spektrum 46 (2023) 104–111.","din1505-2-1":"Beckmann, Nils: Automatisierte, randomisierte Online-Programmierprüfung mit geringem, kurzzeitigem Datenverkehr. In: Informatik Spektrum Bd. 46. Berlin, Springer Science and Business Media LLC (2023), Nr. 2, S. 104–111","chicago-de":"Beckmann, Nils. 2023. Automatisierte, randomisierte Online-Programmierprüfung mit geringem, kurzzeitigem Datenverkehr. Informatik Spektrum 46, Nr. 2: 104–111. doi:10.1007/s00287-023-01534-y, ."},"title":"Automatisierte, randomisierte Online-Programmierprüfung mit geringem, kurzzeitigem Datenverkehr","keyword":["Computer Science Applications","Information Systems"],"language":[{"iso":"ger"}],"date_updated":"2025-06-24T13:31:24Z","publication_identifier":{"issn":["1432-122X"],"eissn":["0170-6012"]},"publication":"Informatik Spektrum","date_created":"2025-06-24T13:28:20Z","publisher":"Springer Science and Business Media LLC","abstract":[{"text":"ZusammenfassungDie Möglichkeit zur Teilnahme an Online-Prüfungen ist generell bedingt durch die Stabilität und Geschwindigkeit der Internetverbindung der Prüfungsteilnehmer sowie die Zuverlässigkeit der Computer und Server, über welche die Prüfung bereitgestellt wird. Insbesondere bei großen Teilnehmerzahlen können hohe Serverlasten zu Beginn und Ende der Prüfung auftreten, wenn viele Teilnehmer zur selben Zeit größere Dateien herunter- oder hochladen. Im Folgenden wird eine Prüfungsmethode vorgestellt, die diese beiden Hürden für eine Prüfungsteilnahme reduziert. Hierbei sind die zu übertragenden Datenmengen gering, betragen insgesamt weniger als ein halbes Megabyte je Teilnehmer und müssen nur zu Beginn und Ende der Prüfung einmalig übermittelt werden. Die Prüfungsmethode eignet sich insbesondere für Programmierprüfungen, ist aber auch für andere Fachgebiete anwendbar. Es stehen verschiedene Fragentypen zur Auswahl. Die Aufgaben werden zufällig auf die Teilnehmer verteilt, können lokal bearbeitet sowie anschließend größtenteils automatisiert korrigiert und ausgewertet werden.","lang":"eng"}],"issue":"2","department":[{"_id":"DEP5000"}],"publication_status":"published","_id":"13016","doi":"10.1007/s00287-023-01534-y","place":"Berlin","intvolume":" 46","user_id":"83781","type":"industry_journal_article"},{"abstract":[{"text":"ObjectiveMany people, including patients with eating disorders (EDs), experience an increased urge for physical activity. \"Trait\"-like activity in patients with EDs is assessed by existing questionnaires, but there are few clinically validated assessments of a \"state\" urge to be physically active. Here, we developed and validated the State Urge to be Physically Active-Questionnaire (SUPA-Q). MethodsAfter developing and piloting the items, N = 126 patients with EDs (mostly anorexia nervosa and bulimia nervosa) took part in our mixed-longitudinal validation study with one primary assessment for all patients and a secondary assessment for a subsample of patients. Cronbach's & alpha; and split-half-methods served as measures of consistency and reliability. Correlations with other questionnaires were used to determine convergent and divergent validity, and confirmatory factor analysis was used for investigating factorial validity. We used paired-samples t-tests for repeated assessments to investigate change sensitivity. ResultsWe found the SUPA-Q to be highly consistent, and reliable and to demonstrate convergent, divergent, and factorial validity. The comparison of SUPA-Q scores from repeated assessments within a subsample of patients demonstrated the questionnaire's change sensitivity, Cohen's d = 0.48. Moreover, an increase in SUPA-Q scores was associated with a less positive mood, more anxiety, more body dissatisfaction, more tenseness, less feelings of control, and more stress. DiscussionThe newly developed SUPA-Q may help to accentuate the necessity to evaluate and address the acute urge to engage in physical activity in patients with EDs in clinical practice and ultimately support tailoring treatments to patients' unique symptom patterns. The questionnaire is available at .","lang":"eng"}],"issue":"10","department":[{"_id":"DEP1500"}],"publisher":"Wiley","quality_controlled":"1","isi":"1","publication_status":"published","_id":"13581","article_number":"e3220","doi":"10.1002/brb3.3220","place":"Malden, Mass.","type":"scientific_journal_article","intvolume":" 13","user_id":"83781","external_id":{"pmid":["37559422"],"isi":["001044780200001"]},"author":[{"last_name":"Amin","first_name":"Lina","full_name":"Amin, Lina"},{"orcid":"0000-0002-9529-2215","id":"85780","first_name":"Georg","last_name":"Halbeisen","full_name":"Halbeisen, Georg"},{"first_name":"Karsten","last_name":"Braks","full_name":"Braks, Karsten"},{"last_name":"Huber","full_name":"Huber, Thomas J.J.","first_name":"Thomas J.J."},{"first_name":"Georgios","full_name":"Paslakis, Georgios","last_name":"Paslakis"}],"year":"2023","status":"public","pmid":"1","title":"The State Urge to be Physically Active-Questionnaire (SUPA-Q): Development and validation of a state measure of activity urges in patients with eating disorders","volume":13,"citation":{"ieee":"L. Amin, G. Halbeisen, K. Braks, T. J. J. Huber, and G. Paslakis, “The State Urge to be Physically Active-Questionnaire (SUPA-Q): Development and validation of a state measure of activity urges in patients with eating disorders,” Brain and Behavior, vol. 13, no. 10, Art. no. e3220, 2023, doi: 10.1002/brb3.3220.","ama":"Amin L, Halbeisen G, Braks K, Huber TJJ, Paslakis G. The State Urge to be Physically Active-Questionnaire (SUPA-Q): Development and validation of a state measure of activity urges in patients with eating disorders. Brain and Behavior. 2023;13(10). doi:10.1002/brb3.3220","chicago":"Amin, Lina, Georg Halbeisen, Karsten Braks, Thomas J.J. Huber, and Georgios Paslakis. “The State Urge to Be Physically Active-Questionnaire (SUPA-Q): Development and Validation of a State Measure of Activity Urges in Patients with Eating Disorders.” Brain and Behavior 13, no. 10 (2023). https://doi.org/10.1002/brb3.3220.","apa":"Amin, L., Halbeisen, G., Braks, K., Huber, T. J. J., & Paslakis, G. (2023). The State Urge to be Physically Active-Questionnaire (SUPA-Q): Development and validation of a state measure of activity urges in patients with eating disorders. Brain and Behavior, 13(10), Article e3220. https://doi.org/10.1002/brb3.3220","mla":"Amin, Lina, et al. “The State Urge to Be Physically Active-Questionnaire (SUPA-Q): Development and Validation of a State Measure of Activity Urges in Patients with Eating Disorders.” Brain and Behavior, vol. 13, no. 10, e3220, 2023, https://doi.org/10.1002/brb3.3220.","havard":"L. Amin, G. Halbeisen, K. Braks, T.J.J. Huber, G. Paslakis, The State Urge to be Physically Active-Questionnaire (SUPA-Q): Development and validation of a state measure of activity urges in patients with eating disorders, Brain and Behavior. 13 (2023).","bjps":"Amin L et al. (2023) The State Urge to Be Physically Active-Questionnaire (SUPA-Q): Development and Validation of a State Measure of Activity Urges in Patients with Eating Disorders. Brain and Behavior 13.","ufg":"Amin, Lina u. a.: The State Urge to be Physically Active-Questionnaire (SUPA-Q): Development and validation of a state measure of activity urges in patients with eating disorders, in: Brain and Behavior 13 (2023), H. 10.","van":"Amin L, Halbeisen G, Braks K, Huber TJJ, Paslakis G. The State Urge to be Physically Active-Questionnaire (SUPA-Q): Development and validation of a state measure of activity urges in patients with eating disorders. Brain and Behavior. 2023;13(10).","chicago-de":"Amin, Lina, Georg Halbeisen, Karsten Braks, Thomas J.J. Huber und Georgios Paslakis. 2023. The State Urge to be Physically Active-Questionnaire (SUPA-Q): Development and validation of a state measure of activity urges in patients with eating disorders. Brain and Behavior 13, Nr. 10. doi:10.1002/brb3.3220, .","din1505-2-1":"Amin, Lina ; Halbeisen, Georg ; Braks, Karsten ; Huber, Thomas J.J. ; Paslakis, Georgios: The State Urge to be Physically Active-Questionnaire (SUPA-Q): Development and validation of a state measure of activity urges in patients with eating disorders. In: Brain and Behavior Bd. 13. Malden, Mass., Wiley (2023), Nr. 10","short":"L. Amin, G. Halbeisen, K. Braks, T.J.J. Huber, G. Paslakis, Brain and Behavior 13 (2023)."},"keyword":["eating disorders","physical activity","psychopathology","psychotherapy","symptom assessment"],"language":[{"iso":"eng"}],"publication":"Brain and Behavior","publication_identifier":{"eissn":["2162-3279"]},"date_created":"2026-03-25T13:36:10Z","date_updated":"2026-03-27T14:12:15Z"},{"date_updated":"2024-08-08T06:32:58Z","publication_identifier":{"eissn":["2056-3280 "],"issn":["2056-3272"]},"publication":"International Journal of Energy Production and Management","date_created":"2022-07-19T12:28:26Z","keyword":["electric vehicles","energy management systems","load shifting","renewable energy","smart grids."],"language":[{"iso":"eng"}],"citation":{"short":"M. Schaffer, F.C. Bollhöfer, J. Üpping, International Journal of Energy Production and Management 7 (2022) 101–113.","chicago-de":"Schaffer, Maria, Fynn Christian Bollhöfer und Johannes Üpping. 2022. Load shifting potential of electric vehicles using management systems for increasing renewable energy share in smart grids. International Journal of Energy Production and Management 7, Nr. 2: 101–113. doi:10.2495/EQ-V7-N2-101-113, .","din1505-2-1":"Schaffer, Maria ; Bollhöfer, Fynn Christian ; Üpping, Johannes: Load shifting potential of electric vehicles using management systems for increasing renewable energy share in smart grids. In: International Journal of Energy Production and Management Bd. 7. Southampton , WIT Press (2022), Nr. 2, S. 101–113","apa":"Schaffer, M., Bollhöfer, F. C., & Üpping, J. (2022). Load shifting potential of electric vehicles using management systems for increasing renewable energy share in smart grids. International Journal of Energy Production and Management, 7(2), 101–113. https://doi.org/10.2495/EQ-V7-N2-101-113","chicago":"Schaffer, Maria, Fynn Christian Bollhöfer, and Johannes Üpping. “Load Shifting Potential of Electric Vehicles Using Management Systems for Increasing Renewable Energy Share in Smart Grids.” International Journal of Energy Production and Management 7, no. 2 (2022): 101–13. https://doi.org/10.2495/EQ-V7-N2-101-113.","van":"Schaffer M, Bollhöfer FC, Üpping J. Load shifting potential of electric vehicles using management systems for increasing renewable energy share in smart grids. International Journal of Energy Production and Management. 2022;7(2):101–13.","mla":"Schaffer, Maria, et al. “Load Shifting Potential of Electric Vehicles Using Management Systems for Increasing Renewable Energy Share in Smart Grids.” International Journal of Energy Production and Management, vol. 7, no. 2, 2022, pp. 101–13, https://doi.org/10.2495/EQ-V7-N2-101-113.","bjps":"Schaffer M, Bollhöfer FC and Üpping J (2022) Load Shifting Potential of Electric Vehicles Using Management Systems for Increasing Renewable Energy Share in Smart Grids. International Journal of Energy Production and Management 7, 101–113.","havard":"M. Schaffer, F.C. Bollhöfer, J. Üpping, Load shifting potential of electric vehicles using management systems for increasing renewable energy share in smart grids, International Journal of Energy Production and Management. 7 (2022) 101–113.","ufg":"Schaffer, Maria/Bollhöfer, Fynn Christian/Üpping, Johannes: Load shifting potential of electric vehicles using management systems for increasing renewable energy share in smart grids, in: International Journal of Energy Production and Management 7 (2022), H. 2, S. 101–113.","ieee":"M. Schaffer, F. C. Bollhöfer, and J. Üpping, “Load shifting potential of electric vehicles using management systems for increasing renewable energy share in smart grids,” International Journal of Energy Production and Management, vol. 7, no. 2, pp. 101–113, 2022, doi: 10.2495/EQ-V7-N2-101-113.","ama":"Schaffer M, Bollhöfer FC, Üpping J. Load shifting potential of electric vehicles using management systems for increasing renewable energy share in smart grids. International Journal of Energy Production and Management. 2022;7(2):101-113. doi:10.2495/EQ-V7-N2-101-113"},"volume":7,"title":"Load shifting potential of electric vehicles using management systems for increasing renewable energy share in smart grids","status":"public","page":"101 - 113","year":"2022","author":[{"first_name":"Maria","last_name":"Schaffer","id":"50151","full_name":"Schaffer, Maria"},{"id":"71911","last_name":"Bollhöfer","full_name":"Bollhöfer, Fynn Christian","first_name":"Fynn Christian"},{"id":"64760","last_name":"Üpping","full_name":"Üpping, Johannes","first_name":"Johannes"}],"intvolume":" 7","user_id":"83781","type":"scientific_journal_article","_id":"8467","doi":"10.2495/EQ-V7-N2-101-113","place":"Southampton ","publication_status":"published","publisher":"WIT Press","quality_controlled":"1","issue":"2","abstract":[{"text":"A decarbonisation of the energy system is necessary to reduce greenhouse gas emissions and thus achieve the climate protection goals. For this reason, the renewable energy share in the power grids of many countries is increasing. In order to stabilize the energy system and increase its flexibility, energy management systems are needed. This paper offers a model of energy management system which starts from the network operator and ends at the consumer (an electric vehicle). Firstly, a controllable local system signal, which is sent through a smart meter gateway from the grid operator to the consumer, has been developed. The signal is based on the renewable energy share in the local grid, on the electricity exchange price and on a defined profile. Then, different charging modes, which regulate the energy consumption based on the signal, have been developed and field tested. Finally, the charging modes have been simulated in order to better compare the data. The results show that with smart charging, 90% of the energy demand can be rescheduled. In view of the load shifting, greenhouse gas emissions and energy costs can be reduced.","lang":"eng"}],"department":[{"_id":"DEP6020"},{"_id":"DEP5000"},{"_id":"DEP5012"}]},{"language":[{"iso":"eng"}],"place":"[Piscataway, NJ]","keyword":["adaptivity","assistance systems","survey","human-centred design","interaction design","self-adaptive systems"],"doi":"10.1109/hsi55341.2022.9869509","_id":"12810","date_updated":"2025-06-26T13:33:32Z","user_id":"83781","editor":[{"full_name":"De Silva, Daswin","last_name":"De Silva","first_name":"Daswin"},{"full_name":"Ruminski , Jacek ","last_name":"Ruminski ","first_name":"Jacek "},{"first_name":"Milos ","last_name":"Manic","full_name":"Manic, Milos "}],"corporate_editor":["Institute of Electrical and Electronics Engineers"],"type":"conference_editor_article","date_created":"2025-04-16T12:22:51Z","publication_identifier":{"eissn":["978-1-6654-6823-7"],"eisbn":["978-1-6654-6822-0"],"issn":["2158-2246"]},"publication":"2022 15th International Conference on Human System Interaction (HSI)","status":"public","publisher":"IEEE","conference":{"location":"Melbourne, AUSTRALIA","name":"15th IEEE International Conference on Human System Interaction (HSI)","end_date":"2022-07-31","start_date":"2022-07-28"},"department":[{"_id":"DEP5023"}],"year":"2022","author":[{"last_name":"Heinz-Jakobs","full_name":"Heinz-Jakobs, Mario","id":"85220","first_name":"Mario"},{"last_name":"Oestreich","full_name":"Oestreich, Hendrik","first_name":"Hendrik"},{"first_name":"Sebastian","last_name":"Wrede","full_name":"Wrede, Sebastian"},{"first_name":"Carsten","last_name":"Röcker","full_name":"Röcker, Carsten","id":"61525"}],"abstract":[{"text":"Recent studies on assistance systems show that adaptive support for users is becoming increasingly important, as this is a promising approach to ensure acceptance, learning support, and appropriate assistance in the long term. Developers of assistance systems are therefore faced with the challenge of designing various dimensions of adaptivity in such a way that they are conducive to acceptance and support. In this paper, we consider the different dimensions and options for the adaptation of assembly assistance and present the results of a first survey to investigate users' expectations regarding the adaptability of assembly assistance systems. Our evaluation shows that users have clear preferences concerning the control over adaptation and adaptation goals, while other aspects of adaptation assistance do not indicate a clear tendency. The results of this survey should serve as a decision support in the design phase of adaptive assistance systems to choose between different implementation options and concepts.","lang":"eng"}],"publication_status":"published","citation":{"van":"Heinz-Jakobs M, Oestreich H, Wrede S, Röcker C. User Expectations Regarding Design Dimensions of Adapative Assistance Systems. De Silva D, Ruminski J, Manic M, Institute of Electrical and Electronics Engineers, editors. 2022 15th International Conference on Human System Interaction (HSI). [Piscataway, NJ]: IEEE; 2022.","ama":"Heinz-Jakobs M, Oestreich H, Wrede S, Röcker C. User Expectations Regarding Design Dimensions of Adapative Assistance Systems. (De Silva D, Ruminski J, Manic M, Institute of Electrical and Electronics Engineers, eds.). IEEE; 2022. doi:10.1109/hsi55341.2022.9869509","ufg":"Heinz-Jakobs, Mario u. a.: User Expectations Regarding Design Dimensions of Adapative Assistance Systems, hg. von De Silva, Daswin u. a., [Piscataway, NJ] 2022.","bjps":"Heinz-Jakobs M et al. (2022) User Expectations Regarding Design Dimensions of Adapative Assistance Systems, De Silva D et al. (eds). [Piscataway, NJ]: IEEE.","havard":"M. Heinz-Jakobs, H. Oestreich, S. Wrede, C. Röcker, User Expectations Regarding Design Dimensions of Adapative Assistance Systems, IEEE, [Piscataway, NJ], 2022.","mla":"Heinz-Jakobs, Mario, et al. “User Expectations Regarding Design Dimensions of Adapative Assistance Systems.” 2022 15th International Conference on Human System Interaction (HSI), edited by Daswin De Silva et al., IEEE, 2022, https://doi.org/10.1109/hsi55341.2022.9869509.","apa":"Heinz-Jakobs, M., Oestreich, H., Wrede, S., & Röcker, C. (2022). User Expectations Regarding Design Dimensions of Adapative Assistance Systems. In D. De Silva, J. Ruminski , M. Manic, & Institute of Electrical and Electronics Engineers (Eds.), 2022 15th International Conference on Human System Interaction (HSI). IEEE. https://doi.org/10.1109/hsi55341.2022.9869509","ieee":"M. Heinz-Jakobs, H. Oestreich, S. Wrede, and C. Röcker, User Expectations Regarding Design Dimensions of Adapative Assistance Systems. [Piscataway, NJ]: IEEE, 2022. doi: 10.1109/hsi55341.2022.9869509.","chicago":"Heinz-Jakobs, Mario, Hendrik Oestreich, Sebastian Wrede, and Carsten Röcker. User Expectations Regarding Design Dimensions of Adapative Assistance Systems. Edited by Daswin De Silva, Jacek Ruminski , Milos Manic, and Institute of Electrical and Electronics Engineers. 2022 15th International Conference on Human System Interaction (HSI). [Piscataway, NJ]: IEEE, 2022. https://doi.org/10.1109/hsi55341.2022.9869509.","short":"M. Heinz-Jakobs, H. Oestreich, S. Wrede, C. Röcker, User Expectations Regarding Design Dimensions of Adapative Assistance Systems, IEEE, [Piscataway, NJ], 2022.","din1505-2-1":"Heinz-Jakobs, Mario ; Oestreich, Hendrik ; Wrede, Sebastian ; Röcker, Carsten ; De Silva, D. ; Ruminski , J. ; Manic, M. ; Institute of Electrical and Electronics Engineers (Hrsg.): User Expectations Regarding Design Dimensions of Adapative Assistance Systems. [Piscataway, NJ] : IEEE, 2022","chicago-de":"Heinz-Jakobs, Mario, Hendrik Oestreich, Sebastian Wrede und Carsten Röcker. 2022. User Expectations Regarding Design Dimensions of Adapative Assistance Systems. Hg. von Daswin De Silva, Jacek Ruminski , Milos Manic, und Institute of Electrical and Electronics Engineers. 2022 15th International Conference on Human System Interaction (HSI). [Piscataway, NJ]: IEEE. doi:10.1109/hsi55341.2022.9869509, ."},"title":"User Expectations Regarding Design Dimensions of Adapative Assistance Systems"},{"abstract":[{"lang":"eng","text":"In diesem Open Access-Tagungsband sind die besten Beiträge des 11. Jahreskolloquiums \"Kommunikation in der Automation\" (KommA 2020) und des 7. Jahreskolloquiums \"Bildverarbeitung in der Automation\" (BVAu 2020) enthalten. Die Kolloquien fanden am 28. und 29. Oktober 2020 statt und wurden erstmalig als digitale Webveranstaltung auf dem Innovation Campus Lemgo organisiert.\r\nDie vorgestellten neuesten Forschungsergebnisse auf den Gebieten der industriellen Kommunikationstechnik und Bildverarbeitung erweitern den aktuellen Stand der Forschung und Technik. Die in den Beiträgen enthaltenen anschauliche Anwendungsbeispiele aus dem Bereich der Automation setzen die Ergebnisse in den direkten Anwendungsbezug."}],"conference":{"end_date":"2020-10-29","start_date":"2020-10-28","name":"11. Jahreskolloquiums \"Kommunikation in der Automation\" (KommA 2020) / 7. Jahreskolloquiums \"Bildverarbeitung in der Automation\" (BVAu 2020)","location":"Lemgo"},"department":[{"_id":"DEP5023"}],"publisher":"Springer Berlin Heidelberg","series_title":"Technologien für die intelligente Automation","publication_status":"published","doi":"10.1007/978-3-662-64283-2","_id":"12907","place":"Berlin, Heidelberg","type":"book_editor","intvolume":" 14","user_id":"83781","year":"2022","page":"329","status":"public","title":"Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2020","citation":{"chicago-de":"Jasperneite, Jürgen und Volker Lohweg, Hrsg. 2022. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2020. Bd. 14. Technologien für die intelligente Automation. Berlin, Heidelberg: Springer Berlin Heidelberg. doi:10.1007/978-3-662-64283-2, .","din1505-2-1":"Jasperneite, J. ; Lohweg, V. (Hrsg.): Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2020, Technologien für die intelligente Automation. Bd. 14. Berlin, Heidelberg : Springer Berlin Heidelberg, 2022","short":"J. Jasperneite, V. Lohweg, eds., Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2020, Springer Berlin Heidelberg, Berlin, Heidelberg, 2022.","havard":"J. Jasperneite, V. Lohweg, eds., Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2020, Springer Berlin Heidelberg, Berlin, Heidelberg, 2022.","bjps":"Jasperneite J and Lohweg V (eds) (2022) Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2020. Berlin, Heidelberg: Springer Berlin Heidelberg.","mla":"Jasperneite, Jürgen, and Volker Lohweg, editors. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2020. Springer Berlin Heidelberg, 2022, https://doi.org/10.1007/978-3-662-64283-2.","ufg":"Jasperneite, Jürgen/Lohweg, Volker: Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2020, Bd. 14, Berlin, Heidelberg 2022 (Technologien für die intelligente Automation).","van":"Jasperneite J, Lohweg V, editors. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2020. Berlin, Heidelberg: Springer Berlin Heidelberg; 2022. 329 p. (Technologien für die intelligente Automation; vol. 14).","chicago":"Jasperneite, Jürgen, and Volker Lohweg, eds. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2020. Vol. 14. Technologien für die intelligente Automation. Berlin, Heidelberg: Springer Berlin Heidelberg, 2022. https://doi.org/10.1007/978-3-662-64283-2.","apa":"Jasperneite, J., & Lohweg, V. (Eds.). (2022). Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2020 (Vol. 14). Springer Berlin Heidelberg. https://doi.org/10.1007/978-3-662-64283-2","ama":"Jasperneite J, Lohweg V, eds. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2020. Vol 14. Springer Berlin Heidelberg; 2022. doi:10.1007/978-3-662-64283-2","ieee":"J. Jasperneite and V. Lohweg, Eds., Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2020, vol. 14. Berlin, Heidelberg: Springer Berlin Heidelberg, 2022. doi: 10.1007/978-3-662-64283-2."},"volume":14,"language":[{"iso":"ger"}],"keyword":["Industrielle Kommunikationstechnik","Industrielle Bildverarbeitung","Network reliability and redundancy methods","Networked Control Systems","Wireless real-time communication","Open Access"],"date_created":"2025-05-12T08:22:49Z","publication_identifier":{"eisbn":["978-3-662-64283-2"],"issn":["2522-8579"],"isbn":["978-3-662-64282-5"],"eissn":["2522-8587"]},"editor":[{"last_name":"Jasperneite","first_name":"Jürgen","id":"1899","full_name":"Jasperneite, Jürgen"},{"orcid":"0000-0002-3325-7887","last_name":"Lohweg","id":"1804","full_name":"Lohweg, Volker","first_name":"Volker"}],"date_updated":"2025-05-12T08:27:40Z"},{"status":"public","quality_controlled":"1","publisher":"Springer","department":[{"_id":"DEP7020"},{"_id":"DEP1305"}],"year":2021,"author":[{"full_name":"Bläsing, Dominic","last_name":"Bläsing","first_name":"Dominic"},{"first_name":"Manfred","last_name":"Bornewasser","full_name":"Bornewasser, Manfred"},{"last_name":"Hinrichsen","full_name":"Hinrichsen, Sven","id":"49010","first_name":"Sven"}],"abstract":[{"lang":"eng","text":"The compatibility concept is widely used in psychology and ergonomics. It describes the fit between elements of a sociotechnical system which is a prerequisite to successfully cooperate towards a common goal. For at least three decades, cognitive compatibility is of increasing importance. It describes the fit of externally presented information, information processing, and the required motor action. However, with increasing system complexity, probability for incompatibility increases, too, leading to time losses, errors and overall degraded performance. The elimination of cognitive incompatibilities through ergonomic measures at the workplace requires a lot of creativity and effort. Using practical examples from mixed-model assembly, improved information management and the use of informational assistance systems are discussed as promising ergonomic approaches. The ultimate goal is to avoid cognitive overload, for example in part picking or assembly tools choosing. To find a fit between externally mediated work instructions via displays and the subjectively used internal models and competencies is a challenging task. Only if this fit is given the system is perceived as beneficial. To achieve this, the assistance system should be configurable to fit individual needs as far as possible. Successful system design requires early participation and comprehensive integration of the assistance systems into the existing IT infrastructure.\r\n\r\nPractical relevance: Varied manual assembly requires a high degree of cognitive work. A rise in complexity of the assembly task increases the risk that cognitive incompatibility and thus cognitive overload will occur more frequently. It is shown that such unhealthy conditions can be countered by better information presentation and by the use of individually adaptable informational assistance systems."}],"publication_status":"published","citation":{"short":"D. Bläsing, M. Bornewasser, S. Hinrichsen, Zeitschrift Für Arbeitswissenschaft (2021).","din1505-2-1":"Bläsing, Dominic ; Bornewasser, Manfred ; Hinrichsen, Sven: Cognitive compatibility in modern manual mixed-model assembly systems. In: Zeitschrift für Arbeitswissenschaft, Springer (2021)","chicago-de":"Bläsing, Dominic, Manfred Bornewasser und Sven Hinrichsen. 2021. Cognitive compatibility in modern manual mixed-model assembly systems. Zeitschrift für Arbeitswissenschaft. doi:10.1007/s41449-021-00296-1, .","van":"Bläsing D, Bornewasser M, Hinrichsen S. Cognitive compatibility in modern manual mixed-model assembly systems. Zeitschrift für Arbeitswissenschaft. 2021;","mla":"Bläsing, Dominic, et al. “Cognitive Compatibility in Modern Manual Mixed-Model Assembly Systems.” Zeitschrift Für Arbeitswissenschaft, Springer, 2021, doi:10.1007/s41449-021-00296-1.","bjps":"Bläsing D, Bornewasser M and Hinrichsen S (2021) Cognitive Compatibility in Modern Manual Mixed-Model Assembly Systems. Zeitschrift für Arbeitswissenschaft.","havard":"D. Bläsing, M. Bornewasser, S. Hinrichsen, Cognitive compatibility in modern manual mixed-model assembly systems, Zeitschrift Für Arbeitswissenschaft. (2021).","ufg":"Bläsing, Dominic et. al. (2021): Cognitive compatibility in modern manual mixed-model assembly systems, in: Zeitschrift für Arbeitswissenschaft.","apa":"Bläsing, D., Bornewasser, M., & Hinrichsen, S. (2021). Cognitive compatibility in modern manual mixed-model assembly systems. Zeitschrift Für Arbeitswissenschaft. https://doi.org/10.1007/s41449-021-00296-1","chicago":"Bläsing, Dominic, Manfred Bornewasser, and Sven Hinrichsen. “Cognitive Compatibility in Modern Manual Mixed-Model Assembly Systems.” Zeitschrift Für Arbeitswissenschaft, 2021. https://doi.org/10.1007/s41449-021-00296-1.","ama":"Bläsing D, Bornewasser M, Hinrichsen S. Cognitive compatibility in modern manual mixed-model assembly systems. Zeitschrift für Arbeitswissenschaft. 2021. doi:10.1007/s41449-021-00296-1","ieee":"D. Bläsing, M. Bornewasser, and S. Hinrichsen, “Cognitive compatibility in modern manual mixed-model assembly systems,” Zeitschrift für Arbeitswissenschaft, 2021."},"title":"Cognitive compatibility in modern manual mixed-model assembly systems","language":[{"iso":"eng"}],"keyword":["Compatibility","Mental model","Mental workload","Multi-model assembly","Informational assistance systems"],"doi":"10.1007/s41449-021-00296-1","_id":"6925","date_updated":"2023-03-15T13:50:08Z","user_id":"49010","date_created":"2021-12-21T17:13:23Z","type":"journal_article","publication_identifier":{"issn":["0340-2444","2366-4681"]},"publication":"Zeitschrift für Arbeitswissenschaft"},{"department":[{"_id":"DEP7020"},{"_id":"DEP7022"},{"_id":"DEP1306"}],"issue":"11","abstract":[{"text":"Technological progress, upcoming cyber-physical systems, and limited resources confront small and medium-sized enterprises (SMEs) with the challenge of complexity management in product development projects spanning over the entire product lifecycle. SMEs require a solution for documenting and analyzing the functional relationships between multiple domains such as products, software, and processes. The German research project FuPEP “Funktionsorientiertes Komplexitätsmanagement in allen Phasen der Produktentstehung” aims to address this issue by developing an assistance system that supports product developers by visualizing functional relationships. This paper presents the methodology and results of the assistance system’s requirements elicitation with two SMEs. Conducting the elicitation during a global pandemic, we discuss its application using specific techniques in light of COVID-19. We model problems and their effects regarding complexity management in product development in a system dynamics model. The most important requirements and use cases elicited are presented, and the requirements elicitation methodology and results are discussed. Additionally, we present a multilayer software architecture design of the assistance system. Our case study suggests a relationship between fear of a missing project focus among project participants and the restriction of requirements elicitation techniques to those possible via web conferencing tools.","lang":"eng"}],"isi":"1","publication_status":"published","_id":"7035","article_number":"149","doi":"10.3390/computers10110149","type":"journal_article","user_id":"83781","intvolume":" 10","year":"2021","author":[{"id":"75846","first_name":"Jan-Phillip","full_name":"Herrmann, Jan-Phillip","last_name":"Herrmann"},{"first_name":"Sebastian","last_name":"Imort","id":"74291","full_name":"Imort, Sebastian"},{"last_name":"Trojanowski","full_name":"Trojanowski, Christoph","first_name":"Christoph"},{"id":"62088","full_name":"Deuter, Andreas","first_name":"Andreas","last_name":"Deuter","orcid":"0000-0002-6529-6215"}],"external_id":{"isi":["000727073200001"]},"status":"public","title":"Requirements Elicitation for an Assistance System for Complexity Management in Product Development of SMEs during COVID-19: A Case Study","citation":{"ama":"Herrmann JP, Imort S, Trojanowski C, Deuter A. Requirements Elicitation for an Assistance System for Complexity Management in Product Development of SMEs during COVID-19: A Case Study. Computers. 2021;10(11). doi:10.3390/computers10110149","ieee":"J.-P. Herrmann, S. Imort, C. Trojanowski, and A. Deuter, “Requirements Elicitation for an Assistance System for Complexity Management in Product Development of SMEs during COVID-19: A Case Study,” Computers, vol. 10, no. 11, Art. no. 149, 2021, doi: 10.3390/computers10110149.","chicago-de":"Herrmann, Jan-Phillip, Sebastian Imort, Christoph Trojanowski und Andreas Deuter. 2021. Requirements Elicitation for an Assistance System for Complexity Management in Product Development of SMEs during COVID-19: A Case Study. Computers 10, Nr. 11. doi:10.3390/computers10110149, .","din1505-2-1":"Herrmann, Jan-Phillip ; Imort, Sebastian ; Trojanowski, Christoph ; Deuter, Andreas: Requirements Elicitation for an Assistance System for Complexity Management in Product Development of SMEs during COVID-19: A Case Study. In: Computers Bd. 10 (2021), Nr. 11","short":"J.-P. Herrmann, S. Imort, C. Trojanowski, A. Deuter, Computers 10 (2021).","bjps":"Herrmann J-P et al. (2021) Requirements Elicitation for an Assistance System for Complexity Management in Product Development of SMEs during COVID-19: A Case Study. Computers 10.","havard":"J.-P. Herrmann, S. Imort, C. Trojanowski, A. Deuter, Requirements Elicitation for an Assistance System for Complexity Management in Product Development of SMEs during COVID-19: A Case Study, Computers. 10 (2021).","mla":"Herrmann, Jan-Phillip, et al. “Requirements Elicitation for an Assistance System for Complexity Management in Product Development of SMEs during COVID-19: A Case Study.” Computers, vol. 10, no. 11, 149, 2021, https://doi.org/10.3390/computers10110149.","ufg":"Herrmann, Jan-Phillip u. a.: Requirements Elicitation for an Assistance System for Complexity Management in Product Development of SMEs during COVID-19: A Case Study, in: Computers 10 (2021), H. 11.","van":"Herrmann JP, Imort S, Trojanowski C, Deuter A. Requirements Elicitation for an Assistance System for Complexity Management in Product Development of SMEs during COVID-19: A Case Study. Computers. 2021;10(11).","chicago":"Herrmann, Jan-Phillip, Sebastian Imort, Christoph Trojanowski, and Andreas Deuter. “Requirements Elicitation for an Assistance System for Complexity Management in Product Development of SMEs during COVID-19: A Case Study.” Computers 10, no. 11 (2021). https://doi.org/10.3390/computers10110149.","apa":"Herrmann, J.-P., Imort, S., Trojanowski, C., & Deuter, A. (2021). Requirements Elicitation for an Assistance System for Complexity Management in Product Development of SMEs during COVID-19: A Case Study. Computers, 10(11), Article 149. https://doi.org/10.3390/computers10110149"},"volume":10,"keyword":["complexity management","assistance system","product development","systems engineering","design structure matrix","asset administration shell"],"language":[{"iso":"eng"}],"publication_identifier":{"eissn":["2073-431X"]},"publication":"Computers","date_created":"2022-02-08T14:48:19Z","date_updated":"2025-06-26T13:37:00Z"},{"status":"public","page":"27-67","author":[{"last_name":"Dreyer","first_name":"Sonja","full_name":"Dreyer, Sonja"},{"last_name":"Werth","full_name":"Werth, Oliver ","first_name":"Oliver "},{"full_name":"Olivotti, Daniel","last_name":"Olivotti","first_name":"Daniel"},{"orcid":"0000-0001-8812-1488","id":"77748","full_name":"Guhr, Nadine","last_name":"Guhr","first_name":"Nadine"},{"last_name":"Breitner","full_name":"Breitner, Michael H.","first_name":"Michael H."}],"year":"2021","volume":13,"citation":{"short":"S. Dreyer, O. Werth, D. Olivotti, N. Guhr, M.H. Breitner, E-Service Journal 13 (2021) 27–67.","chicago-de":"Dreyer, Sonja, Oliver Werth, Daniel Olivotti, Nadine Guhr und Michael H. Breitner. 2021. Knowledge Management Systems for Smart Services: A Synthesis of Design Principles . e-Service Journal 13, Nr. 2: 27–67. doi:10.2979/eservicej.13.2.02, .","din1505-2-1":"Dreyer, Sonja ; Werth, Oliver ; Olivotti, Daniel ; Guhr, Nadine ; Breitner, Michael H.: Knowledge Management Systems for Smart Services: A Synthesis of Design Principles . In: e-Service Journal Bd. 13. Bloomington, Ind., Indiana University Press (2021), Nr. 2, S. 27–67","apa":"Dreyer, S., Werth, O., Olivotti, D., Guhr, N., & Breitner, M. H. (2021). Knowledge Management Systems for Smart Services: A Synthesis of Design Principles . E-Service Journal, 13(2), 27–67. https://doi.org/10.2979/eservicej.13.2.02","chicago":"Dreyer, Sonja, Oliver Werth, Daniel Olivotti, Nadine Guhr, and Michael H. Breitner. “Knowledge Management Systems for Smart Services: A Synthesis of Design Principles .” E-Service Journal 13, no. 2 (2021): 27–67. https://doi.org/10.2979/eservicej.13.2.02.","van":"Dreyer S, Werth O, Olivotti D, Guhr N, Breitner MH. Knowledge Management Systems for Smart Services: A Synthesis of Design Principles . e-Service Journal. 2021;13(2):27–67.","ufg":"Dreyer, Sonja u. a.: Knowledge Management Systems for Smart Services: A Synthesis of Design Principles , in: e-Service Journal 13 (2021), H. 2, S. 27–67.","mla":"Dreyer, Sonja, et al. “Knowledge Management Systems for Smart Services: A Synthesis of Design Principles .” E-Service Journal, vol. 13, no. 2, 2021, pp. 27–67, https://doi.org/10.2979/eservicej.13.2.02.","bjps":"Dreyer S et al. (2021) Knowledge Management Systems for Smart Services: A Synthesis of Design Principles . e-Service Journal 13, 27–67.","havard":"S. Dreyer, O. Werth, D. Olivotti, N. Guhr, M.H. Breitner, Knowledge Management Systems for Smart Services: A Synthesis of Design Principles , E-Service Journal. 13 (2021) 27–67.","ieee":"S. Dreyer, O. Werth, D. Olivotti, N. Guhr, and M. H. Breitner, “Knowledge Management Systems for Smart Services: A Synthesis of Design Principles ,” e-Service Journal, vol. 13, no. 2, pp. 27–67, 2021, doi: 10.2979/eservicej.13.2.02.","ama":"Dreyer S, Werth O, Olivotti D, Guhr N, Breitner MH. Knowledge Management Systems for Smart Services: A Synthesis of Design Principles . e-Service Journal. 2021;13(2):27-67. doi:10.2979/eservicej.13.2.02"},"title":"Knowledge Management Systems for Smart Services: A Synthesis of Design Principles ","keyword":["Design Principles","Design Science Research","Knowledge Management Systems","Smart Service KMS","Smart Services"],"language":[{"iso":"eng"}],"date_updated":"2024-08-23T06:09:13Z","publication":"e-Service Journal","publication_identifier":{"issn":["1528-8226 "],"eissn":["1528-8234"]},"date_created":"2022-04-06T11:32:53Z","publisher":"Indiana University Press","quality_controlled":"1","department":[{"_id":"DEP1523"}],"issue":"2","abstract":[{"text":"Smart services have become increasingly important in the last few years. The provision of smart services combined with product portfolios is advantageous because individual contexts of customers who use the products are addressed. While various and frequently changing data are collected and analyzed, specific knowledge is necessary to turn data into valuable information. A knowledge management system (KMS) adapted to requirements of provided smart services is necessary to aggregate, maintain, and provide knowledge. With a comprehensive literature review over 157 papers, we extracted requirements for KMS for smart services (Smart Service KMS). We present ten design principles derived from the requirements focusing on how tailored Smart Service KMS can be designed. We contribute to the theory by providing an overview about crucial requirements of Smart Service KMS. Practitioners can use our design principles to develop efficient Smart Service KMS","lang":"eng"}],"article_type":"original","publication_status":"published","place":"Bloomington, Ind.","_id":"7458","doi":"10.2979/eservicej.13.2.02","user_id":"83781","intvolume":" 13","type":"scientific_journal_article"},{"date_created":"2021-02-04T15:20:11Z","publication":"Journal of Computational Design and Engineering","publication_identifier":{"eissn":["2288-4300 "]},"date_updated":"2023-03-15T13:49:56Z","language":[{"iso":"eng"}],"keyword":["human–technology interaction","human–computer interaction","crossdevice interaction","cyber-physical systems","assistance","smart factory","middleware","actor model","information system design","industry 4.0"],"title":"Middleware for providing activity-driven assistance in cyber-physical production systems","volume":8,"citation":{"short":"H. Dhiman, C. Röcker, Journal of Computational Design and Engineering 8 (2021) 428–451.","din1505-2-1":"Dhiman, Hitesh ; Röcker, Carsten: Middleware for providing activity-driven assistance in cyber-physical production systems. In: Journal of Computational Design and Engineering Bd. 8. Oxford, Oxford University Press (2021), Nr. 1, S. 428–451","chicago-de":"Dhiman, Hitesh und Carsten Röcker. 2021. Middleware for providing activity-driven assistance in cyber-physical production systems. Journal of Computational Design and Engineering 8, Nr. 1: 428–451. doi:10.1093/jcde/qwaa088, .","apa":"Dhiman, H., & Röcker, C. (2021). Middleware for providing activity-driven assistance in cyber-physical production systems. Journal of Computational Design and Engineering, 8(1), 428–451. https://doi.org/10.1093/jcde/qwaa088","chicago":"Dhiman, Hitesh, and Carsten Röcker. “Middleware for Providing Activity-Driven Assistance in Cyber-Physical Production Systems.” Journal of Computational Design and Engineering 8, no. 1 (2021): 428–51. https://doi.org/10.1093/jcde/qwaa088.","van":"Dhiman H, Röcker C. Middleware for providing activity-driven assistance in cyber-physical production systems. Journal of Computational Design and Engineering. 2021;8(1):428–51.","mla":"Dhiman, Hitesh, and Carsten Röcker. “Middleware for Providing Activity-Driven Assistance in Cyber-Physical Production Systems.” Journal of Computational Design and Engineering, vol. 8, no. 1, Oxford University Press, 2021, pp. 428–51, doi:10.1093/jcde/qwaa088.","havard":"H. Dhiman, C. Röcker, Middleware for providing activity-driven assistance in cyber-physical production systems, Journal of Computational Design and Engineering. 8 (2021) 428–451.","bjps":"Dhiman H and Röcker C (2021) Middleware for Providing Activity-Driven Assistance in Cyber-Physical Production Systems. Journal of Computational Design and Engineering 8, 428–451.","ufg":"Dhiman, Hitesh/Röcker, Carsten (2021): Middleware for providing activity-driven assistance in cyber-physical production systems, in: Journal of Computational Design and Engineering 8 (1), S. 428–451.","ieee":"H. Dhiman and C. Röcker, “Middleware for providing activity-driven assistance in cyber-physical production systems,” Journal of Computational Design and Engineering, vol. 8, no. 1, pp. 428–451, 2021.","ama":"Dhiman H, Röcker C. Middleware for providing activity-driven assistance in cyber-physical production systems. Journal of Computational Design and Engineering. 2021;8(1):428-451. doi:10.1093/jcde/qwaa088"},"author":[{"last_name":"Dhiman","id":"71767","full_name":"Dhiman, Hitesh","first_name":"Hitesh"},{"first_name":"Carsten","last_name":"Röcker","id":"61525","full_name":"Röcker, Carsten"}],"year":2021,"page":"428-451","status":"public","type":"journal_article","user_id":"15514","intvolume":" 8","place":"Oxford","doi":"10.1093/jcde/qwaa088","_id":"4897","publication_status":"published","department":[{"_id":"DEP5023"},{"_id":"DEP5027"}],"issue":"1","abstract":[{"text":"Assistance is becoming increasingly relevant in carrying out industrial work in the context of cyber-physical production systems (CPPSs) and Industry 4.0. While assistance in a single task via a single interaction modality has been explored previously, crossdevice interaction could improve the quality of assistance, especially given the concurrent and distributed nature of work in CPPSs. In this paper, we present the theoretical foundations and implementation of MiWSICx (Middleware for Work Support in Industrial Contexts), a middleware that showcases how multiple interactive computing devices such as tablets, smartphones, augmented/virtual reality glasses, and wearables could be combined to provide crossdevice industrial assistance. Based on activity theory, MiWSICx models human work as activities combining multiple users, artifacts, and cyber-physical objects. MiWSICx is developed using the actor model for deployment on a variety of hardware alongside a CPPS to provide multiuser, crossdevice, multiactivity assistance.","lang":"eng"}],"publisher":"Oxford University Press"},{"publisher":"Springer Science and Business Media","issue":"7","abstract":[{"text":"n the last years, Additive Manufacturing, thanks to its capability of continuous improvements in performance and cost-efficiency, was able to partly replace and redefine well-established manufacturing processes. This research is based on the idea to achieve great cost and operational benefits especially in the field of tool making for injection molding by combining traditional and additive manufacturing in one process chain. Special attention is given to the surface quality in terms of surface roughness and its optimization directly in the Selective Laser Melting process. This article presents the possibility for a remelting process of the SLM parts as a way to optimize the surfaces of the produced parts. The influence of laser remelting on the surface roughness of the parts is analyzed while varying machine parameters like laser power and scan settings. Laser remelting with optimized parameter settings considerably improves the surface quality of SLM parts and is a great starting point for further post-processing techniques, which require a low initial value of surface roughness.","lang":"eng"}],"department":[{"_id":"DEP7000"}],"publication_status":"published","isi":"1","_id":"12790","doi":"10.1007/s10845-021-01744-9","place":"Dordrecht [u.a.]","intvolume":" 32","user_id":"83781","type":"scientific_journal_article","status":"public","page":"1927-1938","external_id":{"isi":["000636136100001"]},"author":[{"last_name":"Simoni","first_name":"Filippo","full_name":"Simoni, Filippo"},{"id":"43559","first_name":"Andrea","full_name":"Huxol, Andrea","last_name":"Huxol"},{"full_name":"Villmer, Franz-Josef","last_name":"Villmer","first_name":"Franz-Josef","id":"14290"}],"year":"2021","volume":32,"citation":{"ieee":"F. Simoni, A. Huxol, and F.-J. Villmer, “Improving surface quality in selective laser melting based tool making,” Journal of Intelligent Manufacturing, vol. 32, no. 7, pp. 1927–1938, 2021, doi: 10.1007/s10845-021-01744-9.","ama":"Simoni F, Huxol A, Villmer FJ. Improving surface quality in selective laser melting based tool making. Journal of Intelligent Manufacturing. 2021;32(7):1927-1938. doi:10.1007/s10845-021-01744-9","short":"F. Simoni, A. Huxol, F.-J. Villmer, Journal of Intelligent Manufacturing 32 (2021) 1927–1938.","chicago-de":"Simoni, Filippo, Andrea Huxol und Franz-Josef Villmer. 2021. Improving surface quality in selective laser melting based tool making. Journal of Intelligent Manufacturing 32, Nr. 7: 1927–1938. doi:10.1007/s10845-021-01744-9, .","din1505-2-1":"Simoni, Filippo ; Huxol, Andrea ; Villmer, Franz-Josef: Improving surface quality in selective laser melting based tool making. In: Journal of Intelligent Manufacturing Bd. 32. Dordrecht [u.a.], Springer Science and Business Media (2021), Nr. 7, S. 1927–1938","apa":"Simoni, F., Huxol, A., & Villmer, F.-J. (2021). Improving surface quality in selective laser melting based tool making. Journal of Intelligent Manufacturing, 32(7), 1927–1938. https://doi.org/10.1007/s10845-021-01744-9","chicago":"Simoni, Filippo, Andrea Huxol, and Franz-Josef Villmer. “Improving Surface Quality in Selective Laser Melting Based Tool Making.” Journal of Intelligent Manufacturing 32, no. 7 (2021): 1927–38. https://doi.org/10.1007/s10845-021-01744-9.","van":"Simoni F, Huxol A, Villmer FJ. Improving surface quality in selective laser melting based tool making. Journal of Intelligent Manufacturing. 2021;32(7):1927–38.","mla":"Simoni, Filippo, et al. “Improving Surface Quality in Selective Laser Melting Based Tool Making.” Journal of Intelligent Manufacturing, vol. 32, no. 7, 2021, pp. 1927–38, https://doi.org/10.1007/s10845-021-01744-9.","havard":"F. Simoni, A. Huxol, F.-J. Villmer, Improving surface quality in selective laser melting based tool making, Journal of Intelligent Manufacturing. 32 (2021) 1927–1938.","bjps":"Simoni F, Huxol A and Villmer F-J (2021) Improving Surface Quality in Selective Laser Melting Based Tool Making. Journal of Intelligent Manufacturing 32, 1927–1938.","ufg":"Simoni, Filippo/Huxol, Andrea/Villmer, Franz-Josef: Improving surface quality in selective laser melting based tool making, in: Journal of Intelligent Manufacturing 32 (2021), H. 7, S. 1927–1938."},"title":"Improving surface quality in selective laser melting based tool making","keyword":["Direct rapid tooling","Toolmaking","Additive manufacturing process chain","Process control","Production systems","Selective laser melting","Surface roughness","Laser surface remelting"],"language":[{"iso":"eng"}],"date_updated":"2025-06-26T13:41:37Z","publication_identifier":{"issn":["0956-5515"],"eissn":["1572-8145"]},"publication":"Journal of Intelligent Manufacturing","date_created":"2025-04-15T09:17:22Z"},{"series_title":"Advances in Intelligent Systems and Computing","publication_status":"published","department":[{"_id":"DEP7020"},{"_id":"DEP1305"}],"conference":{"name":"Human Interaction, Emerging Technologies and Future Applications II. IHIET 2020"},"abstract":[{"text":"Product variety and short product life cycles are characteristic features of modern assembly systems. When variety gets very high, assembly processes usually become very complex, leading to time losses, human errors, and other negative impacts of system performance. In order to prevent such performance declines different informational assistance systems become part of manual assembly systems, offering additional instructions concerning handling and insertion. Otherwise, such systems can result in additional cognitive load rather than decreasing it. Using mobile physiological measures like heart rate variability (HRV) and eye movements just in time changes of overall cognitive load are detectable. As expected, these data indicate increases of mental workload when task demands are becoming more complex. Practical and theoretical concerns, limitations and chances will be discussed.","lang":"eng"}],"quality_controlled":"1","publisher":"Springer","type":"book_chapter","user_id":"49010","place":"Cham","doi":"10.1007/978-3-030-44267-5_75","_id":"6884","title":"Reduction of Cognitive Load in Complex Assembly Systems","citation":{"van":"Bläsing D, Hinrichsen S, Bornewasser M. Reduction of Cognitive Load in Complex Assembly Systems. In: Ahram T, Taiar R, Gremeaux-Bader V, Aminian K, editors. Advances in Intelligent Systems and Computing. Cham: Springer; 2020. p. 495–500. (Advances in Intelligent Systems and Computing).","ama":"Bläsing D, Hinrichsen S, Bornewasser M. Reduction of Cognitive Load in Complex Assembly Systems. In: Ahram T, Taiar R, Gremeaux-Bader V, Aminian K, eds. Advances in Intelligent Systems and Computing. Advances in Intelligent Systems and Computing. Cham: Springer; 2020:495-500. doi:10.1007/978-3-030-44267-5_75","ufg":"Bläsing, Dominic et. al. (2020): Reduction of Cognitive Load in Complex Assembly Systems, in: T. Ahram et. al. (Hgg.): Advances in Intelligent Systems and Computing (=Advances in Intelligent Systems and Computing), Cham, S. 495–500.","havard":"D. Bläsing, S. Hinrichsen, M. Bornewasser, Reduction of Cognitive Load in Complex Assembly Systems, in: T. Ahram , R. Taiar, V. Gremeaux-Bader , K. Aminian (Eds.), Advances in Intelligent Systems and Computing, Springer, Cham, 2020: pp. 495–500.","bjps":"Bläsing D, Hinrichsen S and Bornewasser M (2020) Reduction of Cognitive Load in Complex Assembly Systems. In Ahram T et al. (eds), Advances in Intelligent Systems and Computing. Cham: Springer, pp. 495–500.","mla":"Bläsing, Dominic, et al. “Reduction of Cognitive Load in Complex Assembly Systems.” Advances in Intelligent Systems and Computing, edited by T. Ahram et al., Springer, 2020, pp. 495–500, doi:10.1007/978-3-030-44267-5_75.","apa":"Bläsing, D., Hinrichsen, S., & Bornewasser, M. (2020). Reduction of Cognitive Load in Complex Assembly Systems. In T. Ahram , R. Taiar, V. Gremeaux-Bader , & K. Aminian (Eds.), Advances in Intelligent Systems and Computing (pp. 495–500). Cham: Springer. https://doi.org/10.1007/978-3-030-44267-5_75","ieee":"D. Bläsing, S. Hinrichsen, and M. Bornewasser, “Reduction of Cognitive Load in Complex Assembly Systems,” in Advances in Intelligent Systems and Computing, T. Ahram , R. Taiar, V. Gremeaux-Bader , and K. Aminian, Eds. Cham: Springer, 2020, pp. 495–500.","chicago":"Bläsing, Dominic, Sven Hinrichsen, and Manfred Bornewasser. “Reduction of Cognitive Load in Complex Assembly Systems.” In Advances in Intelligent Systems and Computing, edited by T. Ahram , R. Taiar, V. Gremeaux-Bader , and K. Aminian, 495–500. Advances in Intelligent Systems and Computing. Cham: Springer, 2020. https://doi.org/10.1007/978-3-030-44267-5_75.","short":"D. Bläsing, S. Hinrichsen, M. Bornewasser, in: T. Ahram , R. Taiar, V. Gremeaux-Bader , K. Aminian (Eds.), Advances in Intelligent Systems and Computing, Springer, Cham, 2020, pp. 495–500.","din1505-2-1":"Bläsing, Dominic ; Hinrichsen, Sven ; Bornewasser, Manfred: Reduction of Cognitive Load in Complex Assembly Systems. In: Ahram , T. ; Taiar, R. ; Gremeaux-Bader , V. ; Aminian, K. (Hrsg.): Advances in Intelligent Systems and Computing, Advances in Intelligent Systems and Computing. Cham : Springer, 2020, S. 495–500","chicago-de":"Bläsing, Dominic, Sven Hinrichsen und Manfred Bornewasser. 2020. Reduction of Cognitive Load in Complex Assembly Systems. In: Advances in Intelligent Systems and Computing, hg. von T. Ahram , R. Taiar, V. Gremeaux-Bader , und K. Aminian, 495–500. Advances in Intelligent Systems and Computing. Cham: Springer. doi:10.1007/978-3-030-44267-5_75, ."},"year":2020,"author":[{"full_name":"Bläsing, Dominic","first_name":"Dominic","last_name":"Bläsing"},{"full_name":"Hinrichsen, Sven","id":"49010","last_name":"Hinrichsen","first_name":"Sven"},{"first_name":"Manfred","last_name":"Bornewasser","full_name":"Bornewasser, Manfred"}],"page":"495 - 500","status":"public","date_created":"2021-12-13T08:40:06Z","publication_identifier":{"issn":["2194-5357","2194-5365"],"isbn":["9783030442668","9783030442675"]},"publication":"Advances in Intelligent Systems and Computing","project":[{"name":"Montexas 4.0","_id":"FBB6D104-44D9-11E9-AA25-B54CDB794CE1"}],"date_updated":"2023-03-15T13:50:08Z","editor":[{"full_name":"Ahram , T.","last_name":"Ahram ","first_name":"T."},{"last_name":"Taiar","first_name":"R.","full_name":"Taiar, R."},{"first_name":"V.","last_name":"Gremeaux-Bader ","full_name":"Gremeaux-Bader , V."},{"full_name":"Aminian, K.","first_name":"K.","last_name":"Aminian"}],"language":[{"iso":"eng"}],"keyword":["Assembly assistance systems","Manual assembly","Cognitive load","Physiological measurement","Heart rate variability"]},{"volume":1207,"citation":{"ufg":"Adrian, Benjamin et. al. (2020): App Development via Low-Code Programming as Part of Modern Industrial Engineering Education, in: I. Nunes (Hg.): Advances in Intelligent Systems and Computing (= 1207), Cham, S. 45–51.","havard":"B. Adrian, S. Hinrichsen, A. Nikolenko, App Development via Low-Code Programming as Part of Modern Industrial Engineering Education, in: I. Nunes (Ed.), Advances in Intelligent Systems and Computing, Springer, Cham, 2020: pp. 45–51.","mla":"Adrian, Benjamin, et al. “App Development via Low-Code Programming as Part of Modern Industrial Engineering Education.” Advances in Intelligent Systems and Computing, edited by I. Nunes, vol. 1207, Springer, 2020, pp. 45–51, doi:10.1007/978-3-030-51369-6_7.","bjps":"Adrian B, Hinrichsen S and Nikolenko A (2020) App Development via Low-Code Programming as Part of Modern Industrial Engineering Education. In Nunes I (ed.), Advances in Intelligent Systems and Computing, vol. 1207. Cham: Springer, pp. 45–51.","van":"Adrian B, Hinrichsen S, Nikolenko A. App Development via Low-Code Programming as Part of Modern Industrial Engineering Education. In: Nunes I, editor. Advances in Intelligent Systems and Computing. Cham: Springer; 2020. p. 45–51.","ama":"Adrian B, Hinrichsen S, Nikolenko A. App Development via Low-Code Programming as Part of Modern Industrial Engineering Education. In: Nunes I, ed. Advances in Intelligent Systems and Computing. Vol 1207. Cham: Springer; 2020:45-51. doi:10.1007/978-3-030-51369-6_7","chicago":"Adrian, Benjamin, Sven Hinrichsen, and Alexander Nikolenko. “App Development via Low-Code Programming as Part of Modern Industrial Engineering Education.” In Advances in Intelligent Systems and Computing, edited by I. Nunes, 1207:45–51. Cham: Springer, 2020. https://doi.org/10.1007/978-3-030-51369-6_7.","apa":"Adrian, B., Hinrichsen, S., & Nikolenko, A. (2020). App Development via Low-Code Programming as Part of Modern Industrial Engineering Education. In I. Nunes (Ed.), Advances in Intelligent Systems and Computing (Vol. 1207, pp. 45–51). Cham: Springer. https://doi.org/10.1007/978-3-030-51369-6_7","ieee":"B. Adrian, S. Hinrichsen, and A. Nikolenko, “App Development via Low-Code Programming as Part of Modern Industrial Engineering Education,” in Advances in Intelligent Systems and Computing, vol. 1207, I. Nunes, Ed. Cham: Springer, 2020, pp. 45–51.","chicago-de":"Adrian, Benjamin, Sven Hinrichsen und Alexander Nikolenko. 2020. App Development via Low-Code Programming as Part of Modern Industrial Engineering Education. In: Advances in Intelligent Systems and Computing, hg. von I. Nunes, 1207:45–51. Cham: Springer. doi:10.1007/978-3-030-51369-6_7, .","din1505-2-1":"Adrian, Benjamin ; Hinrichsen, Sven ; Nikolenko, Alexander: App Development via Low-Code Programming as Part of Modern Industrial Engineering Education. In: Nunes, I. (Hrsg.): Advances in Intelligent Systems and Computing. Bd. 1207. Cham : Springer, 2020, S. 45–51","short":"B. Adrian, S. Hinrichsen, A. Nikolenko, in: I. Nunes (Ed.), Advances in Intelligent Systems and Computing, Springer, Cham, 2020, pp. 45–51."},"title":"App Development via Low-Code Programming as Part of Modern Industrial Engineering Education","status":"public","page":"45-51","year":2020,"author":[{"first_name":"Benjamin","full_name":"Adrian, Benjamin","last_name":"Adrian","id":"42266"},{"full_name":"Hinrichsen, Sven","first_name":"Sven","last_name":"Hinrichsen","id":"49010"},{"id":"71431","full_name":"Nikolenko, Alexander","first_name":"Alexander","last_name":"Nikolenko"}],"date_updated":"2023-03-15T13:50:08Z","editor":[{"first_name":"I.","last_name":"Nunes","full_name":"Nunes, I."}],"publication_identifier":{"issn":["2194-5357","2194-5365"],"isbn":["9783030513689","9783030513696"]},"publication":"Advances in Intelligent Systems and Computing","date_created":"2021-12-21T16:15:56Z","keyword":["Cognitive assistance systems","Low-code programming","Didactics"],"language":[{"iso":"eng"}],"publication_status":"published","publisher":"Springer","quality_controlled":"1","conference":{"name":"Advances in Human Factors and Systems Interaction (AHFE 2020) "},"department":[{"_id":"DEP7020"},{"_id":"DEP1305"}],"abstract":[{"text":"The Industrial Engineering Laboratory at the Ostwestfalen-Lippe University of Applied Sciences and Arts researches the user-centered, customer-oriented and efficient design of work and production systems. Its research focuses on investigating different technologies from the context of digitalization in industrial production. Software used to digitally support work processes must be adapted specifically to work systems. It is difficult to take various user requirements into account in standard software. Therefore, IT experts must continuously adapt software in order to make it suitable for different applications. One possible alternative is for software applications to be designed by industrial engineering or users themselves. In low-code programming, in contrast to classic software development, it is possible to create software applications without extensive programming knowledge. In the laboratory, a teaching unit on app development using a low-code platform was designed. It was integrated into an existing teaching concept for industrial engineers, then evaluated using a questionnaire.","lang":"eng"}],"user_id":"49010","intvolume":" 1207","type":"book_chapter","place":"Cham","_id":"6917","doi":"10.1007/978-3-030-51369-6_7"},{"_id":"6918","doi":"10.1007/978-3-030-51369-6_4","place":"Cham","type":"book_chapter","intvolume":" 1207","user_id":"49010","abstract":[{"text":"Manual assembly is shaped by increasing product complexity with higher scope of work and fluctuating demands. To cope with these changes, employees need to collect and process more information. Companies, therefore, face a wide range of challenges, particularly in terms of information supply. Informational assistance systems provide employees with cognitive support, helping to manage complexity. To evaluate the potentials of such systems a laboratory study is accomplished at the Laboratory for Industrial Engineering of the Ostwestfalen-Lippe University of Applied Sciences and Arts. In this paper, selected results of the laboratory study are presented and recommendations for a configuration of assembly assistance systems are derived from the results.","lang":"eng"}],"conference":{"name":"Advances in Human Factors and Systems Interaction (AHFE 2020)"},"department":[{"_id":"DEP7020"},{"_id":"DEP1305"}],"publisher":"Springer","quality_controlled":"1","publication_status":"published","keyword":["Informational assistance systems","Manual assembly","Human-machine interaction","Laboratory studies"],"language":[{"iso":"eng"}],"project":[{"_id":"FBB6D104-44D9-11E9-AA25-B54CDB794CE1","name":"Montexas 4.0"}],"publication":"Advances in Intelligent Systems and Computing","publication_identifier":{"isbn":["9783030513689","9783030513696"],"issn":["2194-5357","2194-5365"]},"date_created":"2021-12-21T16:38:13Z","editor":[{"first_name":"I.","last_name":"Nunes","full_name":"Nunes, I."}],"date_updated":"2023-03-15T13:50:08Z","year":2020,"author":[{"id":"71395","first_name":"Sven","full_name":"Bendzioch, Sven","last_name":"Bendzioch"},{"full_name":"Hinrichsen, Sven","first_name":"Sven","last_name":"Hinrichsen","id":"49010"}],"status":"public","page":"25-31","title":"How to Configure Assembly Assistance Systems – Results of a Laboratory Study","volume":1207,"citation":{"chicago-de":"Bendzioch, Sven und Sven Hinrichsen. 2020. How to Configure Assembly Assistance Systems – Results of a Laboratory Study. In: Advances in Intelligent Systems and Computing, hg. von I. Nunes, 1207:25–31. Cham: Springer. doi:10.1007/978-3-030-51369-6_4, .","din1505-2-1":"Bendzioch, Sven ; Hinrichsen, Sven: How to Configure Assembly Assistance Systems – Results of a Laboratory Study. In: Nunes, I. (Hrsg.): Advances in Intelligent Systems and Computing. Bd. 1207. Cham : Springer, 2020, S. 25–31","short":"S. Bendzioch, S. Hinrichsen, in: I. Nunes (Ed.), Advances in Intelligent Systems and Computing, Springer, Cham, 2020, pp. 25–31.","bjps":"Bendzioch S and Hinrichsen S (2020) How to Configure Assembly Assistance Systems – Results of a Laboratory Study. In Nunes I (ed.), Advances in Intelligent Systems and Computing, vol. 1207. Cham: Springer, pp. 25–31.","havard":"S. Bendzioch, S. Hinrichsen, How to Configure Assembly Assistance Systems – Results of a Laboratory Study, in: I. Nunes (Ed.), Advances in Intelligent Systems and Computing, Springer, Cham, 2020: pp. 25–31.","mla":"Bendzioch, Sven, and Sven Hinrichsen. “How to Configure Assembly Assistance Systems – Results of a Laboratory Study.” Advances in Intelligent Systems and Computing, edited by I. Nunes, vol. 1207, Springer, 2020, pp. 25–31, doi:10.1007/978-3-030-51369-6_4.","ufg":"Bendzioch, Sven/Hinrichsen, Sven (2020): How to Configure Assembly Assistance Systems – Results of a Laboratory Study, in: I. Nunes (Hg.): Advances in Intelligent Systems and Computing (= 1207), Cham, S. 25–31.","van":"Bendzioch S, Hinrichsen S. How to Configure Assembly Assistance Systems – Results of a Laboratory Study. In: Nunes I, editor. Advances in Intelligent Systems and Computing. Cham: Springer; 2020. p. 25–31.","chicago":"Bendzioch, Sven, and Sven Hinrichsen. “How to Configure Assembly Assistance Systems – Results of a Laboratory Study.” In Advances in Intelligent Systems and Computing, edited by I. Nunes, 1207:25–31. Cham: Springer, 2020. https://doi.org/10.1007/978-3-030-51369-6_4.","apa":"Bendzioch, S., & Hinrichsen, S. (2020). How to Configure Assembly Assistance Systems – Results of a Laboratory Study. In I. Nunes (Ed.), Advances in Intelligent Systems and Computing (Vol. 1207, pp. 25–31). Cham: Springer. https://doi.org/10.1007/978-3-030-51369-6_4","ama":"Bendzioch S, Hinrichsen S. How to Configure Assembly Assistance Systems – Results of a Laboratory Study. In: Nunes I, ed. Advances in Intelligent Systems and Computing. Vol 1207. Cham: Springer; 2020:25-31. doi:10.1007/978-3-030-51369-6_4","ieee":"S. Bendzioch and S. Hinrichsen, “How to Configure Assembly Assistance Systems – Results of a Laboratory Study,” in Advances in Intelligent Systems and Computing, vol. 1207, I. Nunes, Ed. Cham: Springer, 2020, pp. 25–31."}},{"status":"public","page":"3-11","year":2020,"author":[{"id":"71395","last_name":"Bendzioch","full_name":"Bendzioch, Sven","first_name":"Sven"},{"first_name":"Sven","last_name":"Hinrichsen","full_name":"Hinrichsen, Sven","id":"49010"},{"full_name":"Adrian, Benjamin","first_name":"Benjamin","id":"42266","last_name":"Adrian"},{"last_name":"Bornewasser","full_name":"Bornewasser, Manfred","first_name":"Manfred"}],"volume":959,"citation":{"ieee":"S. Bendzioch, S. Hinrichsen, B. Adrian, and M. Bornewasser, “Method for Measuring the Application Potential of Assembly Assistance Systems,” in Advances in Human Factors and Systems Interaction AHFE 2019, Washington D.C., USA, 2020, vol. 959, pp. 3–11.","ama":"Bendzioch S, Hinrichsen S, Adrian B, Bornewasser M. Method for Measuring the Application Potential of Assembly Assistance Systems. In: Nunes IL, ed. Advances in Human Factors and Systems Interaction AHFE 2019. Vol 959. Advances in Intelligent Systems and Computing. Cham: Springer; 2020:3-11. doi:https://doi.org/10.1007/978-3-030-20040-4_1","chicago":"Bendzioch, Sven, Sven Hinrichsen, Benjamin Adrian, and Manfred Bornewasser. “Method for Measuring the Application Potential of Assembly Assistance Systems.” In Advances in Human Factors and Systems Interaction AHFE 2019, edited by Isabel L. Nunes, 959:3–11. Advances in Intelligent Systems and Computing. Cham: Springer, 2020. https://doi.org/10.1007/978-3-030-20040-4_1.","apa":"Bendzioch, S., Hinrichsen, S., Adrian, B., & Bornewasser, M. (2020). Method for Measuring the Application Potential of Assembly Assistance Systems. In I. L. Nunes (Ed.), Advances in Human Factors and Systems Interaction AHFE 2019 (Vol. 959, pp. 3–11). Cham: Springer. https://doi.org/10.1007/978-3-030-20040-4_1","ufg":"Bendzioch, Sven et. al. (2020): Method for Measuring the Application Potential of Assembly Assistance Systems, in: Isabel L. Nunes (Hg.): Advances in Human Factors and Systems Interaction AHFE 2019 (=Advances in Intelligent Systems and Computing 959), Cham, S. 3–11.","havard":"S. Bendzioch, S. Hinrichsen, B. Adrian, M. Bornewasser, Method for Measuring the Application Potential of Assembly Assistance Systems, in: I.L. Nunes (Ed.), Advances in Human Factors and Systems Interaction AHFE 2019, Springer, Cham, 2020: pp. 3–11.","mla":"Bendzioch, Sven, et al. “Method for Measuring the Application Potential of Assembly Assistance Systems.” Advances in Human Factors and Systems Interaction AHFE 2019, edited by Isabel L. Nunes, vol. 959, Springer, 2020, pp. 3–11, doi:https://doi.org/10.1007/978-3-030-20040-4_1.","bjps":"Bendzioch S et al. (2020) Method for Measuring the Application Potential of Assembly Assistance Systems. In Nunes IL (ed.), Advances in Human Factors and Systems Interaction AHFE 2019, vol. 959. Cham: Springer, pp. 3–11.","van":"Bendzioch S, Hinrichsen S, Adrian B, Bornewasser M. Method for Measuring the Application Potential of Assembly Assistance Systems. In: Nunes IL, editor. Advances in Human Factors and Systems Interaction AHFE 2019. Cham: Springer; 2020. p. 3–11. (Advances in Intelligent Systems and Computing; vol. 959).","chicago-de":"Bendzioch, Sven, Sven Hinrichsen, Benjamin Adrian und Manfred Bornewasser. 2020. Method for Measuring the Application Potential of Assembly Assistance Systems. In: Advances in Human Factors and Systems Interaction AHFE 2019, hg. von Isabel L. Nunes, 959:3–11. Advances in Intelligent Systems and Computing. Cham: Springer. doi:https://doi.org/10.1007/978-3-030-20040-4_1, .","din1505-2-1":"Bendzioch, Sven ; Hinrichsen, Sven ; Adrian, Benjamin ; Bornewasser, Manfred: Method for Measuring the Application Potential of Assembly Assistance Systems. In: Nunes, I. L. (Hrsg.): Advances in Human Factors and Systems Interaction AHFE 2019, Advances in Intelligent Systems and Computing. Bd. 959. Cham : Springer, 2020, S. 3–11","short":"S. Bendzioch, S. Hinrichsen, B. Adrian, M. Bornewasser, in: I.L. Nunes (Ed.), Advances in Human Factors and Systems Interaction AHFE 2019, Springer, Cham, 2020, pp. 3–11."},"title":"Method for Measuring the Application Potential of Assembly Assistance Systems","keyword":["Complexity evaluation","Manual assembly","Questionnaire","Work analysis method","Assistance systems","Exploratory factor analysis"],"language":[{"iso":"eng"}],"editor":[{"first_name":"Isabel L.","last_name":"Nunes","full_name":"Nunes, Isabel L."}],"date_updated":"2023-03-15T13:49:37Z","project":[{"_id":"FBB6D104-44D9-11E9-AA25-B54CDB794CE1","name":"Montexas 4.0"}],"publication_identifier":{"eisbn":["978-3-030-20040-4"],"isbn":["978-3-030-20039-8"]},"publication":"Advances in Human Factors and Systems Interaction AHFE 2019","date_created":"2019-09-10T06:38:20Z","publisher":"Springer","quality_controlled":"1","abstract":[{"lang":"eng","text":"Because of the trend towards smaller batch sizes and customer-specific products, employees in assembly have to absorb and process more and more information. With the help of assistance systems, the process of information absorption and processing can be designed in a more economical and human-oriented way. Despite the potentials of such systems, companies pay too little attention to the informational design of assembly systems, resulting in a number of significant deficits in information management. To identify such deficits in operational practice, a questionnaire has been developed. This allows the potential use of informational assistance systems for an assembly system to be estimated. In this article, results from an exploratory factor analysis of the developed instrument will be presented and interpreted as a basis for the further development of the questionnaire."}],"department":[{"_id":"DEP7020"},{"_id":"DEP1305"}],"conference":{"end_date":"2019-07-28","start_date":"2019-07-24","name":"10th International Conference on Applied Human Factors and Ergonomics 2019","location":"Washington D.C., USA"},"publication_status":"published","series_title":"Advances in Intelligent Systems and Computing","_id":"1903","doi":"https://doi.org/10.1007/978-3-030-20040-4_1","place":"Cham","intvolume":" 959","user_id":"49010","type":"conference"},{"place":"Cham","_id":"1904","doi":"https://doi.org/10.1007/978-3-030-20040-4_3","user_id":"49010","intvolume":" 959","type":"conference","publisher":"Springer","quality_controlled":"1","conference":{"start_date":"2019-07-24","end_date":"2019-07-28","location":"Washington D.C., USA","name":"10th International Conference on Applied Human Factors and Ergonomics 2019"},"department":[{"_id":"DEP7020"},{"_id":"DEP1305"}],"abstract":[{"lang":"eng","text":"As the number of variations increases and batch sizes grow smaller, it can be difficult to fulfill quality and productivity requirements in manual assembly, as employees must record, process and interpret more information, then convert that information into action. Conventional instruction manuals in the form of text, tables or drawings quickly reach their limits. Innovative assistance systems are essential for keeping up with these changes, as they instruct and support employees in line with their specific situations. The goal of this article is to use a case study to illustrate the problems with providing information in manual assembly, and to suggest a potential solution in the form of an informational assistance system. The company considered in the case study stands out for its large production areas where complex, customer-specific truck bodies are mounted manually."}],"publication_status":"published","series_title":"Advances in Human Factors and Systems Interaction","keyword":["Manual assembly","Assembly assistance systems","Industry 4.0","Information delivery"],"language":[{"iso":"eng"}],"date_updated":"2023-03-15T13:49:37Z","editor":[{"last_name":"Nunes","full_name":"Nunes, Isabel L.","first_name":"Isabel L."}],"publication_identifier":{"issn":["2194-5357"],"eisbn":["978-3-030-20040-4"],"isbn":["978-3-030-20039-8"]},"publication":"Advances in Human Factors and Systems Interaction AHFE 2019","date_created":"2019-09-10T06:58:30Z","project":[{"_id":"FBB6D104-44D9-11E9-AA25-B54CDB794CE1","name":"Montexas 4.0"}],"status":"public","page":"24-33","year":2020,"author":[{"first_name":"Alexander","full_name":"Nikolenko, Alexander","id":"71431","last_name":"Nikolenko"},{"first_name":"Philip","last_name":"Sehr","full_name":"Sehr, Philip","id":"71582"},{"full_name":"Hinrichsen, Sven","first_name":"Sven","last_name":"Hinrichsen","id":"49010"},{"id":"71395","first_name":"Sven","last_name":"Bendzioch","full_name":"Bendzioch, Sven"}],"volume":959,"citation":{"chicago-de":"Nikolenko, Alexander, Philip Sehr, Sven Hinrichsen und Sven Bendzioch. 2020. Digital Assembly Assistance Systems – A Case Study. In: Advances in Human Factors and Systems Interaction AHFE 2019, hg. von Isabel L. Nunes, 959:24–33. Advances in Human Factors and Systems Interaction. Cham: Springer. doi:https://doi.org/10.1007/978-3-030-20040-4_3, .","din1505-2-1":"Nikolenko, Alexander ; Sehr, Philip ; Hinrichsen, Sven ; Bendzioch, Sven: Digital Assembly Assistance Systems – A Case Study. In: Nunes, I. L. (Hrsg.): Advances in Human Factors and Systems Interaction AHFE 2019, Advances in Human Factors and Systems Interaction. Bd. 959. Cham : Springer, 2020, S. 24–33","short":"A. Nikolenko, P. Sehr, S. Hinrichsen, S. Bendzioch, in: I.L. Nunes (Ed.), Advances in Human Factors and Systems Interaction AHFE 2019, Springer, Cham, 2020, pp. 24–33.","ufg":"Nikolenko, Alexander et. al. (2020): Digital Assembly Assistance Systems – A Case Study, in: Isabel L. Nunes (Hg.): Advances in Human Factors and Systems Interaction AHFE 2019 (=Advances in Human Factors and Systems Interaction 959), Cham, S. 24–33.","mla":"Nikolenko, Alexander, et al. “Digital Assembly Assistance Systems – A Case Study.” Advances in Human Factors and Systems Interaction AHFE 2019, edited by Isabel L. Nunes, vol. 959, Springer, 2020, pp. 24–33, doi:https://doi.org/10.1007/978-3-030-20040-4_3.","bjps":"Nikolenko A et al. (2020) Digital Assembly Assistance Systems – A Case Study. In Nunes IL (ed.), Advances in Human Factors and Systems Interaction AHFE 2019, vol. 959. Cham: Springer, pp. 24–33.","havard":"A. Nikolenko, P. Sehr, S. Hinrichsen, S. Bendzioch, Digital Assembly Assistance Systems – A Case Study, in: I.L. Nunes (Ed.), Advances in Human Factors and Systems Interaction AHFE 2019, Springer, Cham, 2020: pp. 24–33.","van":"Nikolenko A, Sehr P, Hinrichsen S, Bendzioch S. Digital Assembly Assistance Systems – A Case Study. In: Nunes IL, editor. Advances in Human Factors and Systems Interaction AHFE 2019. Cham: Springer; 2020. p. 24–33. (Advances in Human Factors and Systems Interaction; vol. 959).","chicago":"Nikolenko, Alexander, Philip Sehr, Sven Hinrichsen, and Sven Bendzioch. “Digital Assembly Assistance Systems – A Case Study.” In Advances in Human Factors and Systems Interaction AHFE 2019, edited by Isabel L. Nunes, 959:24–33. Advances in Human Factors and Systems Interaction. Cham: Springer, 2020. https://doi.org/10.1007/978-3-030-20040-4_3.","apa":"Nikolenko, A., Sehr, P., Hinrichsen, S., & Bendzioch, S. (2020). Digital Assembly Assistance Systems – A Case Study. In I. L. Nunes (Ed.), Advances in Human Factors and Systems Interaction AHFE 2019 (Vol. 959, pp. 24–33). Cham: Springer. https://doi.org/10.1007/978-3-030-20040-4_3","ama":"Nikolenko A, Sehr P, Hinrichsen S, Bendzioch S. Digital Assembly Assistance Systems – A Case Study. In: Nunes IL, ed. Advances in Human Factors and Systems Interaction AHFE 2019. Vol 959. Advances in Human Factors and Systems Interaction. Cham: Springer; 2020:24-33. doi:https://doi.org/10.1007/978-3-030-20040-4_3","ieee":"A. Nikolenko, P. Sehr, S. Hinrichsen, and S. Bendzioch, “Digital Assembly Assistance Systems – A Case Study,” in Advances in Human Factors and Systems Interaction AHFE 2019, Washington D.C., USA, 2020, vol. 959, pp. 24–33."},"title":"Digital Assembly Assistance Systems – A Case Study"},{"date_created":"2020-11-26T14:10:03Z","publication_identifier":{"isbn":["978-3-030-50343-7"],"eisbn":["978-3-030-50344-4"]},"publication":"22nd International Conference on Human-Computer Interaction","date_updated":"2025-06-26T08:59:34Z","oa":"1","language":[{"iso":"eng"}],"keyword":["Assistive systems","Eye tracking","Human behavior"],"title":"Exploring Users' Eye Movements When Using Projection-based Assembly Assistive Systems","citation":{"ieee":"M. Heinz, S. Büttner, and C. Röcker, “Exploring Users’ Eye Movements When Using Projection-based Assembly Assistive Systems,” in 22nd International Conference on Human-Computer Interaction, Copenhagen, Denmark, 2020, vol. 12203, pp. 259–272. doi: https://doi.org/10.1007/978-3-030-50344-4_19.","ama":"Heinz M, Büttner S, Röcker C. Exploring Users’ Eye Movements When Using Projection-based Assembly Assistive Systems. In: 22nd International Conference on Human-Computer Interaction. Vol 12203. Lecture Notes in Computer Science. Springer; 2020:259-272. doi:https://doi.org/10.1007/978-3-030-50344-4_19","short":"M. Heinz, S. Büttner, C. Röcker, in: 22nd International Conference on Human-Computer Interaction, Springer, Berlin, 2020, pp. 259–272.","chicago-de":"Heinz, Mario, Sebastian Büttner und Carsten Röcker. 2020. Exploring Users’ Eye Movements When Using Projection-based Assembly Assistive Systems. In: 22nd International Conference on Human-Computer Interaction, 12203:259–272. Lecture Notes in Computer Science. Berlin: Springer. doi:https://doi.org/10.1007/978-3-030-50344-4_19, .","din1505-2-1":"Heinz, Mario ; Büttner, Sebastian ; Röcker, Carsten: Exploring Users’ Eye Movements When Using Projection-based Assembly Assistive Systems. In: 22nd International Conference on Human-Computer Interaction, Lecture Notes in Computer Science. Bd. 12203. Berlin : Springer, 2020, S. 259–272","apa":"Heinz, M., Büttner, S., & Röcker, C. (2020). Exploring Users’ Eye Movements When Using Projection-based Assembly Assistive Systems. 22nd International Conference on Human-Computer Interaction, 12203, 259–272. https://doi.org/10.1007/978-3-030-50344-4_19","chicago":"Heinz, Mario, Sebastian Büttner, and Carsten Röcker. “Exploring Users’ Eye Movements When Using Projection-Based Assembly Assistive Systems.” In 22nd International Conference on Human-Computer Interaction, 12203:259–72. Lecture Notes in Computer Science. Berlin: Springer, 2020. https://doi.org/10.1007/978-3-030-50344-4_19.","van":"Heinz M, Büttner S, Röcker C. Exploring Users’ Eye Movements When Using Projection-based Assembly Assistive Systems. In: 22nd International Conference on Human-Computer Interaction. Berlin: Springer; 2020. p. 259–72. (Lecture Notes in Computer Science; vol. 12203).","havard":"M. Heinz, S. Büttner, C. Röcker, Exploring Users’ Eye Movements When Using Projection-based Assembly Assistive Systems, in: 22nd International Conference on Human-Computer Interaction, Springer, Berlin, 2020: pp. 259–272.","bjps":"Heinz M, Büttner S and Röcker C (2020) Exploring Users’ Eye Movements When Using Projection-Based Assembly Assistive Systems. 22nd International Conference on Human-Computer Interaction, vol. 12203. Berlin: Springer, pp. 259–272.","mla":"Heinz, Mario, et al. “Exploring Users’ Eye Movements When Using Projection-Based Assembly Assistive Systems.” 22nd International Conference on Human-Computer Interaction, vol. 12203, Springer, 2020, pp. 259–72, https://doi.org/10.1007/978-3-030-50344-4_19.","ufg":"Heinz, Mario/Büttner, Sebastian/Röcker, Carsten: Exploring Users’ Eye Movements When Using Projection-based Assembly Assistive Systems, in: o. Hg.: 22nd International Conference on Human-Computer Interaction, Bd. 12203, Berlin 2020 (Lecture Notes in Computer Science), S. 259–272."},"volume":12203,"year":"2020","main_file_link":[{"url":"https://link.springer.com/chapter/10.1007/978-3-030-50344-4_19","open_access":"1"}],"author":[{"full_name":"Heinz, Mario","id":"68913","first_name":"Mario","last_name":"Heinz"},{"id":"61868","last_name":"Büttner","first_name":"Sebastian","full_name":"Büttner, Sebastian"},{"first_name":"Carsten","full_name":"Röcker, Carsten","last_name":"Röcker","id":"61525"}],"page":"259-272","status":"public","type":"conference","intvolume":" 12203","user_id":"83781","doi":"https://doi.org/10.1007/978-3-030-50344-4_19","_id":"4096","place":"Berlin","series_title":"Lecture Notes in Computer Science","publication_status":"published","abstract":[{"lang":"eng","text":"Projection-based assistive systems have shown to be a promising technology to support workers during manual assembly processes in industrial manufacturing by projecting instructions into the working area. While existing studies have investigated various aspects of these systems, little research has been conducted regarding the way in which the user accesses the provided instructions. In this paper we analyze the eye movements of users during the repeated execution of an assembly task at a projection-based assistive system in order to gain insights into the utilization of the presented instructions. For this purpose, we analyzed eye tracking recordings from a user study with 15 participants to investigate the sequences in which the respective instructions are observed by the users. The results show a significantly lower number of nonlinear gaze sequences as well as a significantly higher number of steps without observing the instructions during the repeated use of the assistive system. In addition, there was a significantly lower task completion time during repeated use of the assistive system."}],"department":[{"_id":"DEP5023"}],"conference":{"location":"Copenhagen, Denmark","name":"22nd International Conference on Human-Computer Interaction","end_date":"2020-07-24","start_date":"2020-07-19"},"publisher":"Springer"},{"publication_identifier":{"issn":["2522-8579"],"eisbn":["978-3-662-59895-5"],"eissn":["2522-8587"],"isbn":["978-3-662-59894-8"]},"date_created":"2021-02-02T13:12:47Z","editor":[{"id":"1899","first_name":"Jürgen","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen"},{"orcid":"0000-0002-3325-7887","first_name":"Volker","full_name":"Lohweg, Volker","last_name":"Lohweg","id":"1804"}],"date_updated":"2025-05-12T08:07:26Z","oa":"1","keyword":["Industrielle Kommunikationstechnik Industrielle Bildverarbeitung Network reliability and redundancy methods Networked Control Systems Wireless real-time communication Open Access quality control","reliability","safety and risk"],"language":[{"iso":"ger"}],"title":"Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018","citation":{"ieee":"J. Jasperneite and V. Lohweg, Eds., Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018, vol. 12. Berlin, Heidelberg: Springer Vieweg, 2020. doi: https://doi.org/10.1007/978-3-662-59895-5.","apa":"Jasperneite, J., & Lohweg, V. (Eds.). (2020). Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018 (Vol. 12). Springer Vieweg. https://doi.org/10.1007/978-3-662-59895-5","chicago":"Jasperneite, Jürgen, and Volker Lohweg, eds. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018. Vol. 12. Technologien für die intelligente Automation. Berlin, Heidelberg: Springer Vieweg, 2020. https://doi.org/10.1007/978-3-662-59895-5.","ama":"Jasperneite J, Lohweg V, eds. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018. Vol 12. Springer Vieweg; 2020. doi:https://doi.org/10.1007/978-3-662-59895-5","van":"Jasperneite J, Lohweg V, editors. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018. Berlin, Heidelberg: Springer Vieweg; 2020. 364 p. ( Technologien für die intelligente Automation; vol. 12).","havard":"J. Jasperneite, V. Lohweg, eds., Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018, Springer Vieweg, Berlin, Heidelberg, 2020.","mla":"Jasperneite, Jürgen, and Volker Lohweg, editors. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018. Springer Vieweg, 2020, https://doi.org/10.1007/978-3-662-59895-5.","bjps":"Jasperneite J and Lohweg V (eds) (2020) Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018. Berlin, Heidelberg: Springer Vieweg.","ufg":"Jasperneite, Jürgen/Lohweg, Volker: Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018, Bd. 12, Berlin, Heidelberg 2020 ( Technologien für die intelligente Automation).","short":"J. Jasperneite, V. Lohweg, eds., Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018, Springer Vieweg, Berlin, Heidelberg, 2020.","din1505-2-1":"Jasperneite, J. ; Lohweg, V. (Hrsg.): Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018, Technologien für die intelligente Automation. Bd. 12. Berlin, Heidelberg : Springer Vieweg, 2020","chicago-de":"Jasperneite, Jürgen und Volker Lohweg, Hrsg. 2020. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2018. Bd. 12. Technologien für die intelligente Automation. Berlin, Heidelberg: Springer Vieweg. doi:https://doi.org/10.1007/978-3-662-59895-5, ."},"volume":12,"main_file_link":[{"open_access":"1","url":"https://link.springer.com/book/10.1007/978-3-662-59895-5?page=2#about"}],"year":"2020","status":"public","page":"364","type":"book_editor","intvolume":" 12","user_id":"83781","_id":"4851","doi":"https://doi.org/10.1007/978-3-662-59895-5","place":"Berlin, Heidelberg","series_title":" Technologien für die intelligente Automation","publication_status":"published","abstract":[{"lang":"ger","text":"In diesem Open-Access-Tagungsband sind die besten Beiträge des 9. Jahreskolloquiums \"Kommunikation in der Automation\" (KommA 2018) und des 6. Jahreskolloquiums \"Bildverarbeitung in der Automation\" (BVAu 2018) enthalten. Die Kolloquien fanden am 20. und 21. November 2018 in der SmartFactoryOWL, einer gemeinsamen Einrichtung des Fraunhofer IOSB-INA und der Technischen Hochschule Ostwestfalen-Lippe statt.\r\nDie vorgestellten neuesten Forschungsergebnisse auf den Gebieten der industriellen Kommunikationstechnik und Bildverarbeitung erweitern den aktuellen Stand der Forschung und Technik. Die in den Beiträgen enthaltenen anschaulichen Beispiele aus dem Bereich der Automation setzen die Ergebnisse in den direkten Anwendungsbezug."}],"conference":{"location":"Lemgo","name":"9. Jahreskolloquiums \"Kommunikation in der Automation\" (KommA 2018) / 6. Jahreskolloquiums \"Bildverarbeitung in der Automation\" (BVAu 2018)","start_date":"2018-11-20","end_date":"20218-11-21"},"department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"publisher":"Springer Vieweg"},{"date_created":"2021-02-02T13:29:38Z","publication_identifier":{"isbn":["978-1-7281-5298-1"],"eisbn":["978-1-7281-5297-4","978-1-7281-5296-7 "]},"publication":"16th IEEE International Conference on Factory Communication Systems (WFCS)","date_updated":"2025-06-26T13:24:15Z","editor":[{"last_name":"Almeida","full_name":"Almeida, Lus","first_name":"Lus"},{"first_name":"Ramez","full_name":"Daoud, Ramez","last_name":"Daoud"},{"first_name":"Ahlem","last_name":"Mifdaoui","full_name":"Mifdaoui, Ahlem"},{"full_name":"Golatowski, Frank","first_name":"Frank","last_name":"Golatowski"},{"full_name":"Amer, Hassanein","first_name":"Hassanein","last_name":"Amer"},{"last_name":"Santos","full_name":"Santos, Pedro","first_name":"Pedro"}],"corporate_editor":["Institute of Electrical and Electronics Engineers"],"language":[{"iso":"eng"}],"keyword":["CYBER-PHYSICAL SYSTEMS"],"title":"Controller of Controllers Architecture for Management of Heterogeneous Industrial Networks","citation":{"ieee":"F. Ansah et al., “Controller of Controllers Architecture for Management of Heterogeneous Industrial Networks,” in 16th IEEE International Conference on Factory Communication Systems (WFCS), Porto, PORTUGAL, 2020, pp. 35–42. doi: 10.1109/wfcs47810.2020.9114506.","ama":"Ansah F, Soler Perez Olaya S, Krummacker D, et al. Controller of Controllers Architecture for Management of Heterogeneous Industrial Networks. In: Almeida L, Daoud R, Mifdaoui A, et al., eds. 16th IEEE International Conference on Factory Communication Systems (WFCS). IEEE; 2020:35-42. doi:10.1109/wfcs47810.2020.9114506","chicago":"Ansah, F., S. Soler Perez Olaya, Dennis Krummacker, C. Fischer, A. Winkel, René Guillaume, Lukasz Wisniewski, et al. “Controller of Controllers Architecture for Management of Heterogeneous Industrial Networks.” In 16th IEEE International Conference on Factory Communication Systems (WFCS), edited by Lus Almeida, Ramez Daoud, Ahlem Mifdaoui, Frank Golatowski, Hassanein Amer, Pedro Santos, and Institute of Electrical and Electronics Engineers, 35–42. [Piscataway, NJ]: IEEE, 2020. https://doi.org/10.1109/wfcs47810.2020.9114506.","apa":"Ansah, F., Soler Perez Olaya, S., Krummacker, D., Fischer, C., Winkel, A., Guillaume, R., Wisniewski, L., Ehrlich, M., Mandarawi, W., Trsek, H., de Meer, H., Wollschlaeger, M., Schotten, H. D., & Jasperneite, J. (2020). Controller of Controllers Architecture for Management of Heterogeneous Industrial Networks. In L. Almeida, R. Daoud, A. Mifdaoui, F. Golatowski, H. Amer, P. Santos, & Institute of Electrical and Electronics Engineers (Eds.), 16th IEEE International Conference on Factory Communication Systems (WFCS) (pp. 35–42). IEEE. https://doi.org/10.1109/wfcs47810.2020.9114506","ufg":"Ansah, F. u. a.: Controller of Controllers Architecture for Management of Heterogeneous Industrial Networks, in: Almeida, Lus u. a. (Hgg.): 16th IEEE International Conference on Factory Communication Systems (WFCS), [Piscataway, NJ] 2020, S. 35–42.","havard":"F. Ansah, S. Soler Perez Olaya, D. Krummacker, C. Fischer, A. Winkel, R. Guillaume, L. Wisniewski, M. Ehrlich, W. Mandarawi, H. Trsek, H. de Meer, M. Wollschlaeger, H.D. Schotten, J. Jasperneite, Controller of Controllers Architecture for Management of Heterogeneous Industrial Networks, in: L. Almeida, R. Daoud, A. Mifdaoui, F. Golatowski, H. Amer, P. Santos, Institute of Electrical and Electronics Engineers (Eds.), 16th IEEE International Conference on Factory Communication Systems (WFCS), IEEE, [Piscataway, NJ], 2020: pp. 35–42.","mla":"Ansah, F., et al. “Controller of Controllers Architecture for Management of Heterogeneous Industrial Networks.” 16th IEEE International Conference on Factory Communication Systems (WFCS), edited by Lus Almeida et al., IEEE, 2020, pp. 35–42, https://doi.org/10.1109/wfcs47810.2020.9114506.","bjps":"Ansah F et al. (2020) Controller of Controllers Architecture for Management of Heterogeneous Industrial Networks. In Almeida L et al. (eds), 16th IEEE International Conference on Factory Communication Systems (WFCS). [Piscataway, NJ]: IEEE, pp. 35–42.","van":"Ansah F, Soler Perez Olaya S, Krummacker D, Fischer C, Winkel A, Guillaume R, et al. Controller of Controllers Architecture for Management of Heterogeneous Industrial Networks. In: Almeida L, Daoud R, Mifdaoui A, Golatowski F, Amer H, Santos P, et al., editors. 16th IEEE International Conference on Factory Communication Systems (WFCS). [Piscataway, NJ]: IEEE; 2020. p. 35–42.","din1505-2-1":"Ansah, F. ; Soler Perez Olaya, S. ; Krummacker, Dennis ; Fischer, C. ; Winkel, A. ; Guillaume, René ; Wisniewski, Lukasz ; Ehrlich, Marco ; u. a.: Controller of Controllers Architecture for Management of Heterogeneous Industrial Networks. In: Almeida, L. ; Daoud, R. ; Mifdaoui, A. ; Golatowski, F. ; Amer, H. ; Santos, P. ; Institute of Electrical and Electronics Engineers (Hrsg.): 16th IEEE International Conference on Factory Communication Systems (WFCS). [Piscataway, NJ] : IEEE, 2020, S. 35–42","chicago-de":"Ansah, F., S. Soler Perez Olaya, Dennis Krummacker, C. Fischer, A. Winkel, René Guillaume, Lukasz Wisniewski, u. a. 2020. Controller of Controllers Architecture for Management of Heterogeneous Industrial Networks. In: 16th IEEE International Conference on Factory Communication Systems (WFCS), hg. von Lus Almeida, Ramez Daoud, Ahlem Mifdaoui, Frank Golatowski, Hassanein Amer, Pedro Santos, und Institute of Electrical and Electronics Engineers, 35–42. [Piscataway, NJ]: IEEE. doi:10.1109/wfcs47810.2020.9114506, .","short":"F. Ansah, S. Soler Perez Olaya, D. Krummacker, C. Fischer, A. Winkel, R. Guillaume, L. Wisniewski, M. Ehrlich, W. Mandarawi, H. Trsek, H. de Meer, M. Wollschlaeger, H.D. Schotten, J. Jasperneite, in: L. Almeida, R. Daoud, A. Mifdaoui, F. Golatowski, H. Amer, P. Santos, Institute of Electrical and Electronics Engineers (Eds.), 16th IEEE International Conference on Factory Communication Systems (WFCS), IEEE, [Piscataway, NJ], 2020, pp. 35–42."},"year":"2020","author":[{"first_name":"F.","full_name":"Ansah, F.","last_name":"Ansah"},{"full_name":"Soler Perez Olaya, S.","first_name":"S.","last_name":"Soler Perez Olaya"},{"full_name":"Krummacker, Dennis","last_name":"Krummacker","first_name":"Dennis"},{"full_name":"Fischer, C.","first_name":"C.","last_name":"Fischer"},{"first_name":"A.","last_name":"Winkel","full_name":"Winkel, A."},{"first_name":"René","last_name":"Guillaume","full_name":"Guillaume, René"},{"id":"1710","last_name":"Wisniewski","full_name":"Wisniewski, Lukasz","first_name":"Lukasz"},{"last_name":"Ehrlich","first_name":"Marco","id":"61562","full_name":"Ehrlich, Marco"},{"first_name":"W.","last_name":"Mandarawi","full_name":"Mandarawi, W."},{"id":"1486","full_name":"Trsek, Henning","last_name":"Trsek","first_name":"Henning","orcid":"0000-0002-0133-0656"},{"last_name":"de Meer","full_name":"de Meer, Hermann","first_name":"Hermann"},{"last_name":"Wollschlaeger","first_name":"Martin","full_name":"Wollschlaeger, Martin"},{"full_name":"Schotten, Hans D.","first_name":"Hans D.","last_name":"Schotten"},{"first_name":"Jürgen","id":"1899","last_name":"Jasperneite","full_name":"Jasperneite, Jürgen"}],"page":"35-42","status":"public","type":"conference","user_id":"83781","place":"[Piscataway, NJ]","doi":"10.1109/wfcs47810.2020.9114506","_id":"4857","publication_status":"published","department":[{"_id":"DEP5023"},{"_id":"DEP5019"}],"conference":{"start_date":"2020-04-27","end_date":"2020-04-29","name":"16th IEEE International Conference on Factory Communication Systems (WFCS)","location":"Porto, PORTUGAL"},"abstract":[{"text":"Increasing heterogeneity of industrial network systems is a fact and the chances that in the future one communication standard will be able to fulfill the requirements of all possible applications are utopian. With the increasing number of communication systems, their management, configuration, and maintenance become a significant issue. Additionally, due to the increasing amount of network services and traffic, the management of available network resources and the possibility of delivering certain levels of communication quality of service, especially across different network solutions becomes a big challenge. Therefore, in this paper a Controller of Controllers (CoC) concept for management of heterogeneous industrial networks is proposed. The concept is designed to support still widely spread legacy fieldbus systems, different Ethernet-based industrial solutions, and potentially upcoming network technologies. The goal is achieved by leveraging state-of-the-art architectural concepts such as software-defined networks, which allows for integration of abstract models in network management. The concept is described and discussed by way of a demonstrator concept for a heterogeneous system of fieldbus and Ethernet-based time-sensitive networks.","lang":"eng"}],"publisher":"IEEE"},{"series_title":"Decision Engineering","publication_status":"published","abstract":[{"lang":"eng","text":"The digitization of the industry, the drive towards smart factories as well as the Internet of Production (IoP) require rising smartness of products and services. Smart physical products are often mechatronic products that include increasing amounts of software. The development of software, however, comes along with new challenges for companies specialized in developing mechanical, electrical or electronic products. Some of these challenges address the product lifecycle management (PLM)-related business and work processes. The management of software lifecycles requires a much more rigorous requirements management. Furthermore, special solutions for management of source code in distributed development teams are needed. The build-process and testing activities need to be conducted in a systematic manner. The generation and provision of different licensing models need to be mastered and finally the issue of security needs to be addressed for any product that can be networked---which by the way is a strategic target of nearly any product developing company. Application Lifecycle Management (ALM) covers many of the above-mentioned issues. IT solutions for ALM are comparable to traditional PLM solutions, but focus particularly on software as a product. Thus, these systems have become widely used by software companies in the same manner as PLM solutions belong to the standard enterprise IT environment of companies developing physical products. With software penetrating traditional physical products, product managers, product developers, manufacturing staff etc. need to work with both, PLM and ALM, since neither solution is able to cover both domains sufficiently. However, ALM and PLM solutions feature redundant functionality. Thus, best practices for the systematic integration of ALM and PLM are required."}],"department":[{"_id":"DEP7022"},{"_id":"DEP1306"}],"publisher":"Springer","type":"book_chapter","user_id":"83781","doi":"10.1007/978-3-030-16134-7_11","_id":"7783","place":"Cham, Switzerland","title":"Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study","citation":{"ieee":"A. Deuter, A. Otte, M. Ebert, and F. Possel-Dölken, “Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study,” in Product lifecycle management (Volume 4), J. Stark, Ed. Cham, Switzerland: Springer, 2019, pp. 125–143. doi: 10.1007/978-3-030-16134-7_11.","ama":"Deuter A, Otte A, Ebert M, Possel-Dölken F. Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study. In: Stark J, ed. Product Lifecycle Management (Volume 4). Decision Engineering. Springer; 2019:125-143. doi:10.1007/978-3-030-16134-7_11","apa":"Deuter, A., Otte, A., Ebert, M., & Possel-Dölken, F. (2019). Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study. In J. Stark (Ed.), Product lifecycle management (Volume 4) (pp. 125–143). Springer. https://doi.org/10.1007/978-3-030-16134-7_11","chicago":"Deuter, Andreas, Andreas Otte, Marcel Ebert, and Frank Possel-Dölken. “Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study.” In Product Lifecycle Management (Volume 4), edited by John Stark, 125–43. Decision Engineering. Cham, Switzerland: Springer, 2019. https://doi.org/10.1007/978-3-030-16134-7_11.","van":"Deuter A, Otte A, Ebert M, Possel-Dölken F. Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study. In: Stark J, editor. Product lifecycle management (Volume 4). Cham, Switzerland: Springer; 2019. p. 125–43. (Decision Engineering).","ufg":"Deuter, Andreas u. a.: Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study, in: Stark, John (Hg.): Product lifecycle management (Volume 4), Cham, Switzerland 2019 (Decision Engineering), S. 125–143.","havard":"A. Deuter, A. Otte, M. Ebert, F. Possel-Dölken, Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study, in: J. Stark (Ed.), Product Lifecycle Management (Volume 4), Springer, Cham, Switzerland, 2019: pp. 125–143.","bjps":"Deuter A et al. (2019) Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study. In Stark J (ed.), Product Lifecycle Management (Volume 4). Cham, Switzerland: Springer, pp. 125–143.","mla":"Deuter, Andreas, et al. “Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study.” Product Lifecycle Management (Volume 4), edited by John Stark, Springer, 2019, pp. 125–43, https://doi.org/10.1007/978-3-030-16134-7_11.","short":"A. Deuter, A. Otte, M. Ebert, F. Possel-Dölken, in: J. Stark (Ed.), Product Lifecycle Management (Volume 4), Springer, Cham, Switzerland, 2019, pp. 125–143.","chicago-de":"Deuter, Andreas, Andreas Otte, Marcel Ebert und Frank Possel-Dölken. 2019. Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study. In: Product lifecycle management (Volume 4), hg. von John Stark, 125–143. Decision Engineering. Cham, Switzerland: Springer. doi:10.1007/978-3-030-16134-7_11, .","din1505-2-1":"Deuter, Andreas ; Otte, Andreas ; Ebert, Marcel ; Possel-Dölken, Frank: Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study. In: Stark, J. (Hrsg.): Product lifecycle management (Volume 4), Decision Engineering. Cham, Switzerland : Springer, 2019, S. 125–143"},"author":[{"full_name":"Deuter, Andreas","last_name":"Deuter","id":"62088","first_name":"Andreas","orcid":"0000-0002-6529-6215"},{"id":"51466","first_name":"Andreas","last_name":"Otte","full_name":"Otte, Andreas"},{"first_name":"Marcel","last_name":"Ebert","full_name":"Ebert, Marcel"},{"full_name":"Possel-Dölken, Frank","first_name":"Frank","last_name":"Possel-Dölken"}],"year":"2019","page":"125-143","status":"public","date_created":"2022-04-25T10:46:14Z","publication_identifier":{"eisbn":["978-3-030-16134-7"],"issn":["1619-5736"],"eissn":["2197-6589"],"isbn":["978-3-030-16133-0"]},"publication":"Product lifecycle management (Volume 4)","editor":[{"full_name":"Stark, John","first_name":"John","last_name":"Stark"}],"date_updated":"2025-06-26T13:40:03Z","language":[{"iso":"eng"}],"keyword":["Product lifecycle management","Application Lifecycle Management","Smart products","Systems engineering"]},{"status":"public","page":"795-800","author":[{"first_name":"Alexander","last_name":"Nikolenko","full_name":"Nikolenko, Alexander","id":"71431"},{"first_name":"Sven","full_name":"Hinrichsen, Sven","id":"49010","last_name":"Hinrichsen"}],"year":2019,"volume":1026,"citation":{"ama":"Nikolenko A, Hinrichsen S. Potential of Industrial Image Processing in Manual Assembly. In: Ahram T, Karwowski W, Pickl S, Taiar R, eds. Human Systems Engineering and Design II. IHSED 2019. Advances in Intelligent Systems and Computing. Vol 1026. Advances in Intelligent Systems and Computing. Cham: Springer Nature; 2019:795-800. doi:https://doi.org/10.1007/978-3-030-27928-8_121","ieee":"A. Nikolenko and S. Hinrichsen, “Potential of Industrial Image Processing in Manual Assembly,” in Human Systems Engineering and Design II. IHSED 2019. Advances in Intelligent Systems and Computing, Universität der Bundeswehr, München, 2019, vol. 1026, pp. 795–800.","van":"Nikolenko A, Hinrichsen S. Potential of Industrial Image Processing in Manual Assembly. In: Ahram T, Karwowski W, Pickl S, Taiar R, editors. Human Systems Engineering and Design II IHSED 2019 Advances in Intelligent Systems and Computing. Cham: Springer Nature; 2019. p. 795–800. (Advances in Intelligent Systems and Computing; vol. 1026).","ufg":"Nikolenko, Alexander/Hinrichsen, Sven (2019): Potential of Industrial Image Processing in Manual Assembly, in: T. Ahram et. al. (Hgg.): Human Systems Engineering and Design II. IHSED 2019. Advances in Intelligent Systems and Computing (=Advances in Intelligent Systems and Computing 1026), Cham, S. 795–800.","havard":"A. Nikolenko, S. Hinrichsen, Potential of Industrial Image Processing in Manual Assembly, in: T. Ahram, W. Karwowski, S. Pickl, R. Taiar (Eds.), Human Systems Engineering and Design II. IHSED 2019. Advances in Intelligent Systems and Computing, Springer Nature, Cham, 2019: pp. 795–800.","bjps":"Nikolenko A and Hinrichsen S (2019) Potential of Industrial Image Processing in Manual Assembly. In Ahram T et al. (eds), Human Systems Engineering and Design II. IHSED 2019. Advances in Intelligent Systems and Computing, vol. 1026. Cham: Springer Nature, pp. 795–800.","mla":"Nikolenko, Alexander, and Sven Hinrichsen. “Potential of Industrial Image Processing in Manual Assembly.” Human Systems Engineering and Design II. IHSED 2019. Advances in Intelligent Systems and Computing, edited by T. Ahram et al., vol. 1026, Springer Nature, 2019, pp. 795–800, doi:https://doi.org/10.1007/978-3-030-27928-8_121.","apa":"Nikolenko, A., & Hinrichsen, S. (2019). Potential of Industrial Image Processing in Manual Assembly. In T. Ahram, W. Karwowski, S. Pickl, & R. Taiar (Eds.), Human Systems Engineering and Design II. IHSED 2019. Advances in Intelligent Systems and Computing (Vol. 1026, pp. 795–800). Cham: Springer Nature. https://doi.org/10.1007/978-3-030-27928-8_121","chicago":"Nikolenko, Alexander, and Sven Hinrichsen. “Potential of Industrial Image Processing in Manual Assembly.” In Human Systems Engineering and Design II. IHSED 2019. Advances in Intelligent Systems and Computing, edited by T. Ahram, W. Karwowski, S. Pickl, and R. Taiar, 1026:795–800. Advances in Intelligent Systems and Computing. Cham: Springer Nature, 2019. https://doi.org/10.1007/978-3-030-27928-8_121.","short":"A. Nikolenko, S. Hinrichsen, in: T. Ahram, W. Karwowski, S. Pickl, R. Taiar (Eds.), Human Systems Engineering and Design II. IHSED 2019. Advances in Intelligent Systems and Computing, Springer Nature, Cham, 2019, pp. 795–800.","din1505-2-1":"Nikolenko, Alexander ; Hinrichsen, Sven: Potential of Industrial Image Processing in Manual Assembly. In: Ahram, T. ; Karwowski, W. ; Pickl, S. ; Taiar, R. (Hrsg.): Human Systems Engineering and Design II. IHSED 2019. Advances in Intelligent Systems and Computing, Advances in Intelligent Systems and Computing. Bd. 1026. Cham : Springer Nature, 2019, S. 795–800","chicago-de":"Nikolenko, Alexander und Sven Hinrichsen. 2019. Potential of Industrial Image Processing in Manual Assembly. In: Human Systems Engineering and Design II. IHSED 2019. Advances in Intelligent Systems and Computing, hg. von T. Ahram, W. Karwowski, S. Pickl, und R. Taiar, 1026:795–800. Advances in Intelligent Systems and Computing. Cham: Springer Nature. doi:https://doi.org/10.1007/978-3-030-27928-8_121, ."},"title":"Potential of Industrial Image Processing in Manual Assembly","keyword":["Industrial image processing","Manual assembly","Assistance systems","Machine vision"],"language":[{"iso":"eng"}],"editor":[{"first_name":"T.","full_name":"Ahram, T.","last_name":"Ahram"},{"full_name":"Karwowski, W.","first_name":"W.","last_name":"Karwowski"},{"full_name":"Pickl, S.","first_name":"S.","last_name":"Pickl"},{"last_name":"Taiar","first_name":"R.","full_name":"Taiar, R."}],"date_updated":"2023-03-15T13:49:37Z","publication_identifier":{"isbn":["978-3-030-27927-1"],"eisbn":["978-3-030-27928-8"]},"publication":"Human Systems Engineering and Design II. IHSED 2019. Advances in Intelligent Systems and Computing","date_created":"2019-09-10T05:52:02Z","publisher":"Springer Nature","quality_controlled":"1","abstract":[{"text":"As customers’ options for configuring products to match their requirements increase, the number of assembly variants grows. Due to this large number of variants, assembly processes often cannot be automated in an economical way, and manual assembly remains highly important. Additional support options must be implemented to continue completing manual assembly processes reliably in the future. Image processing systems are one promising approach. The purpose of this paper is to establish the potential offered by industrial image processing in manual assembly, building on fundamental concepts, as well as to identify requirements and provide recommendations for selecting and arranging system components. ","lang":"eng"}],"department":[{"_id":"DEP7020"},{"_id":"DEP1305"}],"conference":{"location":"Universität der Bundeswehr, München","name":"2nd International Conference on Human Systems Engineering and Design (IHSED2019): Future Trends and Applications","start_date":"2019-09-16","end_date":"2019-09-18"},"publication_status":"published","series_title":"Advances in Intelligent Systems and Computing","_id":"1901","doi":"https://doi.org/10.1007/978-3-030-27928-8_121","place":"Cham","intvolume":" 1026","user_id":"74004","type":"conference"},{"user_id":"15514","type":"book_chapter","doi":"10.1109/PERCOMW.2019.8730771","_id":"4311","place":"Piscataway, NJ","publication_status":"published","publisher":"IEEE","abstract":[{"lang":"eng","text":"Recent trends towards digitization in the industrial domain are also driving profound socio-technical changes. On the one hand, these technologies enable shorter product lifecycles and servitization, but on the other hand, the increasing technical complexity of the equipment makes its operation and maintenance a challenge for workers. Assistance systems using pervasive technologies can bridge the gap between the abilities of the workers and the demands of handling technical complexity by enriching workplace activities with relevant, context-dependent information. In this paper, we present an application that replaces a conventional, paper-based maintenance manual with digital, Augmented Reality based instructions that are delivered at the appropriate place and time."}],"department":[{"_id":"DEP5023"}],"conference":{"name":"2019 IEEE International Conference on Pervasive Computing and Communications ","location":"Kyoto, Japan","start_date":"2019-03-11","end_date":"2019-03-15"},"date_updated":"2023-03-15T13:49:51Z","date_created":"2021-01-06T13:59:08Z","publication":"2019 IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops)","publication_identifier":{"isbn":["978-1-5386-9151-9"]},"language":[{"iso":"eng"}],"keyword":["Industry 4.0","Cyber Physical Systems","Augmented Reality","Complexity","Maintenance","HoloLens"],"citation":{"din1505-2-1":"Dhiman, Hitesh ; Röcker, Carsten: Worker Assistance in Smart Production Environments using Pervasive Technologies. In: 2019 IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops). Piscataway, NJ : IEEE, 2019, S. 95–100","chicago-de":"Dhiman, Hitesh und Carsten Röcker. 2019. Worker Assistance in Smart Production Environments using Pervasive Technologies. In: 2019 IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops), 95–100. Piscataway, NJ: IEEE. doi:10.1109/PERCOMW.2019.8730771, .","short":"H. Dhiman, C. Röcker, in: 2019 IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops), IEEE, Piscataway, NJ, 2019, pp. 95–100.","mla":"Dhiman, Hitesh, and Carsten Röcker. “Worker Assistance in Smart Production Environments Using Pervasive Technologies.” 2019 IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops), IEEE, 2019, pp. 95–100, doi:10.1109/PERCOMW.2019.8730771.","bjps":"Dhiman H and Röcker C (2019) Worker Assistance in Smart Production Environments Using Pervasive Technologies. 2019 IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops). Piscataway, NJ: IEEE, pp. 95–100.","havard":"H. Dhiman, C. Röcker, Worker Assistance in Smart Production Environments using Pervasive Technologies, in: 2019 IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops), IEEE, Piscataway, NJ, 2019: pp. 95–100.","ufg":"Dhiman, Hitesh/Röcker, Carsten (2019): Worker Assistance in Smart Production Environments using Pervasive Technologies, in: 2019 IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops), Piscataway, NJ, S. 95–100.","van":"Dhiman H, Röcker C. Worker Assistance in Smart Production Environments using Pervasive Technologies. In: 2019 IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops). Piscataway, NJ: IEEE; 2019. p. 95–100.","chicago":"Dhiman, Hitesh, and Carsten Röcker. “Worker Assistance in Smart Production Environments Using Pervasive Technologies.” In 2019 IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops), 95–100. Piscataway, NJ: IEEE, 2019. https://doi.org/10.1109/PERCOMW.2019.8730771.","apa":"Dhiman, H., & Röcker, C. (2019). Worker Assistance in Smart Production Environments using Pervasive Technologies. In 2019 IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops) (pp. 95–100). Piscataway, NJ: IEEE. https://doi.org/10.1109/PERCOMW.2019.8730771","ama":"Dhiman H, Röcker C. Worker Assistance in Smart Production Environments using Pervasive Technologies. In: 2019 IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops). Piscataway, NJ: IEEE; 2019:95-100. doi:10.1109/PERCOMW.2019.8730771","ieee":"H. Dhiman and C. Röcker, “Worker Assistance in Smart Production Environments using Pervasive Technologies,” in 2019 IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops), Piscataway, NJ: IEEE, 2019, pp. 95–100."},"title":"Worker Assistance in Smart Production Environments using Pervasive Technologies","page":"95 - 100","status":"public","author":[{"last_name":"Dhiman","full_name":"Dhiman, Hitesh","id":"71767","first_name":"Hitesh"},{"first_name":"Carsten","last_name":"Röcker","full_name":"Röcker, Carsten","id":"61525"}],"year":2019},{"publisher":"Springer International Publishing","quality_controlled":"1","abstract":[{"lang":"eng","text":"Empirical research shows that the informational design of manual assembly systems is becoming increasingly important in the light of growing complexity. Assembly assistance systems supply employees with information according to their needs and individual situation. This article aims to present important principles for the design of informational assembly assistance systems. The empirical basis for these principles is formed by projects involving the introduction of informational assistance systems for assembly work. The trends and design recommendations are explained using a model, which illustrates important associations between the complexity of assembly tasks, the demands on the mental capacity of employees, work productivity and the use of assembly assistance systems."}],"conference":{"start_date":"2019-02-07","end_date":"2019-02-10","location":"San Diego, USA","name":"2nd International Conference on Intelligent Human Systems"},"department":[{"_id":"DEP7020"},{"_id":"DEP1305"}],"publication_status":"published","_id":"611","doi":"10.1007/978-3-030-11051-2_44","place":"Cham","user_id":"49010","type":"conference","status":"public","page":"286-292","year":2019,"author":[{"first_name":"Sven","full_name":"Hinrichsen, Sven","last_name":"Hinrichsen","id":"49010"},{"last_name":"Bornewasser","first_name":"Manfred","full_name":"Bornewasser, Manfred"}],"main_file_link":[{"url":"https://link.springer.com/chapter/10.1007/978-3-030-11051-2_44"}],"citation":{"van":"Hinrichsen S, Bornewasser M. How to Design Assembly Assistance Systems. In: Karwowski W, Ahram T, editors. Advances in Intelligent Systems and Computing. Cham: Springer International Publishing; 2019. p. 286–92.","ama":"Hinrichsen S, Bornewasser M. How to Design Assembly Assistance Systems. In: Karwowski W, Ahram T, eds. Advances in Intelligent Systems and Computing. Cham: Springer International Publishing; 2019:286-292. doi:10.1007/978-3-030-11051-2_44","ufg":"Hinrichsen, Sven/Bornewasser, Manfred (2019): How to Design Assembly Assistance Systems, in: Waldemar Karwowski/Tareq Ahram (Hgg.): Advances in Intelligent Systems and Computing, Cham, S. 286–292.","bjps":"Hinrichsen S and Bornewasser M (2019) How to Design Assembly Assistance Systems. In Karwowski W and Ahram T (eds), Advances in Intelligent Systems and Computing. Cham: Springer International Publishing, pp. 286–292.","havard":"S. Hinrichsen, M. Bornewasser, How to Design Assembly Assistance Systems, in: W. Karwowski, T. Ahram (Eds.), Advances in Intelligent Systems and Computing, Springer International Publishing, Cham, 2019: pp. 286–292.","mla":"Hinrichsen, Sven, and Manfred Bornewasser. “How to Design Assembly Assistance Systems.” Advances in Intelligent Systems and Computing, edited by Waldemar Karwowski and Tareq Ahram, Springer International Publishing, 2019, pp. 286–92, doi:10.1007/978-3-030-11051-2_44.","apa":"Hinrichsen, S., & Bornewasser, M. (2019). How to Design Assembly Assistance Systems. In W. Karwowski & T. Ahram (Eds.), Advances in Intelligent Systems and Computing (pp. 286–292). Cham: Springer International Publishing. https://doi.org/10.1007/978-3-030-11051-2_44","ieee":"S. Hinrichsen and M. Bornewasser, “How to Design Assembly Assistance Systems,” in Advances in Intelligent Systems and Computing, San Diego, USA, 2019, pp. 286–292.","chicago":"Hinrichsen, Sven, and Manfred Bornewasser. “How to Design Assembly Assistance Systems.” In Advances in Intelligent Systems and Computing, edited by Waldemar Karwowski and Tareq Ahram, 286–92. Cham: Springer International Publishing, 2019. https://doi.org/10.1007/978-3-030-11051-2_44.","short":"S. Hinrichsen, M. Bornewasser, in: W. Karwowski, T. Ahram (Eds.), Advances in Intelligent Systems and Computing, Springer International Publishing, Cham, 2019, pp. 286–292.","chicago-de":"Hinrichsen, Sven und Manfred Bornewasser. 2019. How to Design Assembly Assistance Systems. In: Advances in Intelligent Systems and Computing, hg. von Waldemar Karwowski und Tareq Ahram, 286–292. Cham: Springer International Publishing. doi:10.1007/978-3-030-11051-2_44, .","din1505-2-1":"Hinrichsen, Sven ; Bornewasser, Manfred: How to Design Assembly Assistance Systems. In: Karwowski, W. ; Ahram, T. (Hrsg.): Advances in Intelligent Systems and Computing. Cham : Springer International Publishing, 2019, S. 286–292"},"title":"How to Design Assembly Assistance Systems","keyword":["Assistance systems","Manual assembly","Cognitive ergonomics"],"language":[{"iso":"eng"}],"editor":[{"first_name":"Waldemar ","full_name":"Karwowski, Waldemar ","last_name":"Karwowski"},{"full_name":"Ahram, Tareq","last_name":"Ahram","first_name":"Tareq"}],"date_updated":"2023-03-15T13:50:03Z","publication":"Advances in Intelligent Systems and Computing","publication_identifier":{"eisbn":["978-3-030-11051-2"],"issn":["2194-5357"],"eissn":["2194-5365"],"isbn":["978-3-030-11050-5"]},"date_created":"2019-02-28T14:29:37Z"},{"main_file_link":[{"open_access":"1","url":"https://ediss.sub.uni-hamburg.de/handle/ediss/8756 "}],"year":2019,"author":[{"first_name":"Konrad","last_name":"Solbrig","id":"59789","full_name":"Solbrig, Konrad"}],"ddc":["660"],"abstract":[{"text":"AbstractThe industrial production ofwood-based compo-sites (WBCs) features the core processes in theforming and press line,which are characterisedby densification and the curing of resin-blended furnish materialto obtain a panel from a formed mat in a continuous or batch-wise process.Here, the reliable measurement of process parameters and panel properties is indispensablefor moni-toring and controllingproductionand quality.The in-plane area density(𝜌A)of the mat and the raw density(𝜌)of the panel,along withits vertical rawdensity profile (RDP),aretypically determined through nondestructivemeans of radiometric de-vices.X-ray systems for density measurement on WBCsare commonly usedin both industry and research. Theyfollow a similar basic princi-pleof radiation transmissionwith specificsetups depending onthe measuring taskat hand. De-tector signalsare evaluated regarding relative radiation transmission, which is well-knownto followBeer’s law of exponential attenuation.Note here, particular conditions regarding radia-tion (energyand beam geometry) and material properties (consistent and homogeneous) are expected. These conditions, however, cannot be consistently achieved in applied radiometric in-vestigationson WBCs [...]","lang":"eng"},{"lang":"ger","text":"AbstractXVIIprovided by the present thesis. The practicalim-plementation, however,must consequentlybe performed by the device manufactures. The us-ers of such modern X-raysystems are enabledto obtain enhanced quality of their measuring re-sults, which is relevant for both WBC science(wide range of partly new composites) and in-dustry (increasing requirements on reliability and accuracy).Eventually, the properapplication of capable nondestructive evaluation methods by valid and precise measuring systems for moni-toring and controllingquality and processparam-etersin WBC production offersthe possibility ofachievingsavings in raw materials and energy consumption as well as fundamental ap-proaches forimprovingWBC production, thus,to optimise processconditionsand materialprop-ertiesin general.\r\nKurzfassungDie industrielle Produktion von plattenförmigen Holzwerkstoffen (HWS) wirdmaßgeblich durchdie Kernprozessein der Form-und Pressen-straßebestimmt. Die Plattenherstellung ist durch die Verdichtung und Aushärtung von geformten Mattenaus beleimtenHolzpartikelngekenn-zeichnet, was in kontinuierlichen oder taktwei-sen Prozessenerfolgt. Dabei ist diezuverlässige Messung von Prozessparametern und Plattenei-genschaften fürdieÜberwachung und Steue-rung von Produktion und Qualitätunabdingbar. Die Bestimmung des Flächengewichts(Flächen-dichte 𝜌A)der Matte und der Rohdichte(𝜌)der Platte sowie des vertikalen Rohdichteprofils (RDP) erfolgt für gewöhnlich zerstörungsfrei mit-tels radiometrischer Geräte. Heute sind sowohl in der Industrie als auch in der Forschung Rönt-gensysteme zur Dichtemessung (Densitometrie) an Holz und Holzwerkstoffen verbreitet. Deren Grundprinzip zur Durchstrahlung ist ähnlich, wo-hingegen sich der jeweilige Aufbau in Abhängig-keit der Messaufgabeund auch in Bezug auf den Geräteherstellerunterscheidet. Die aus den ge-messenen Detektorsignalen ausgewertete rela-tive Durchstrahlung kann durch das hinlänglich bekannte Beer’scheGesetzfür die exponentielle Schwächungbeschrieben werden. Die Gültigkeit setzt bestimmte Bedingungen in Bezug auf Strahlung (Energie und Strahlgeometrie) und Materialeigenschaften (konsistentund homo-gen) voraus, die bei radiometrischen Untersu-chungen an HWSin der allgemeinen Praxis je-doch nicht angemessen erfüllt werden können [...]"}],"status":"public","page":"453","publisher":"Staats- und Universitätsbibliothek Hamburg Carl von Ossietzky ","urn":"urn:nbn:de:gbv:18-ediss-89270","title":"Applied Investigations on Wood-Based Composites in the Context of X-Ray Densitometry","citation":{"ieee":"K. Solbrig, Applied Investigations on Wood-Based Composites in the Context of X-Ray Densitometry. Hamburg : Staats- und Universitätsbibliothek Hamburg Carl von Ossietzky , 2019.","ama":"Solbrig K. Applied Investigations on Wood-Based Composites in the Context of X-Ray Densitometry. Hamburg : Staats- und Universitätsbibliothek Hamburg Carl von Ossietzky ; 2019.","din1505-2-1":"Solbrig, Konrad: Applied Investigations on Wood-Based Composites in the Context of X-Ray Densitometry. Hamburg : Staats- und Universitätsbibliothek Hamburg Carl von Ossietzky , 2019","chicago-de":"Solbrig, Konrad. 2019. Applied Investigations on Wood-Based Composites in the Context of X-Ray Densitometry. Hamburg : Staats- und Universitätsbibliothek Hamburg Carl von Ossietzky .","short":"K. Solbrig, Applied Investigations on Wood-Based Composites in the Context of X-Ray Densitometry, Staats- und Universitätsbibliothek Hamburg Carl von Ossietzky , Hamburg , 2019.","chicago":"Solbrig, Konrad. Applied Investigations on Wood-Based Composites in the Context of X-Ray Densitometry. Hamburg : Staats- und Universitätsbibliothek Hamburg Carl von Ossietzky , 2019.","apa":"Solbrig, K. (2019). Applied Investigations on Wood-Based Composites in the Context of X-Ray Densitometry. Hamburg : Staats- und Universitätsbibliothek Hamburg Carl von Ossietzky .","bjps":"Solbrig K (2019) Applied Investigations on Wood-Based Composites in the Context of X-Ray Densitometry. Hamburg : Staats- und Universitätsbibliothek Hamburg Carl von Ossietzky .","mla":"Solbrig, Konrad. Applied Investigations on Wood-Based Composites in the Context of X-Ray Densitometry. Staats- und Universitätsbibliothek Hamburg Carl von Ossietzky , 2019.","havard":"K. Solbrig, Applied Investigations on Wood-Based Composites in the Context of X-Ray Densitometry, Staats- und Universitätsbibliothek Hamburg Carl von Ossietzky , Hamburg , 2019.","ufg":"Solbrig, Konrad (2019): Applied Investigations on Wood-Based Composites in the Context of X-Ray Densitometry, Hamburg .","van":"Solbrig K. Applied Investigations on Wood-Based Composites in the Context of X-Ray Densitometry. Hamburg : Staats- und Universitätsbibliothek Hamburg Carl von Ossietzky ; 2019. 453 p."},"publication_status":"published","oa":"1","alternative_title":["Angewandte Untersuchungen an Holzwerkstoffen im Zusammenhang mit der Dichtemessung mittels Röntgenstrahlung"],"place":"Hamburg ","keyword":["density measurement","radiation transmission","porous low-Z composite material","true density","elemental composition and ash content","effective atomic number","mass attenuation coefficient","X-ray energy spectrum","law of attenuation","beam hardening and radiation build-up","radiation-physical interdependencies","Dichtemessung","Durchstrahlung","poröser Verbundwerkstoff","Reindichte","elementare Zusammensetzung und Aschegehalt","effektive Ordnungszahl","Massenschwächungskoeffizient","Röntgenspektrum","Schwächungsgesetz","Strahlaufhärtung und Strahlungsaufbau","strahlungsphysikalische Wechselbeziehungen"],"language":[{"iso":"eng"}],"_id":"4919","date_created":"2021-02-09T09:31:41Z","type":"dissertation","supervisor":[{"full_name":"Ressel, Jörg","first_name":"Jörg","last_name":"Ressel"},{"first_name":"Heiko","full_name":"Thömen, Heiko","last_name":"Thömen"}],"user_id":"68554","date_updated":"2023-03-15T13:49:56Z"},{"citation":{"short":"F. Simoni, A. Huxol, F.-J. Villmer, Approach Towards Surface Improvement in Additively Manufactured Tools, Elsevier BV, Amsterdam [u.a.], 2019.","chicago-de":"Simoni, Filippo, Andrea Huxol und Franz-Josef Villmer. 2019. Approach Towards Surface Improvement in Additively Manufactured Tools. 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS). Bd. 52. IFAC-PapersOnLine. Amsterdam [u.a.]: Elsevier BV. doi:10.1016/j.ifacol.2019.10.032, .","din1505-2-1":"Simoni, Filippo ; Huxol, Andrea ; Villmer, Franz-Josef: Approach Towards Surface Improvement in Additively Manufactured Tools, IFAC-PapersOnLine. Bd. 52. Amsterdam [u.a.] : Elsevier BV, 2019","ama":"Simoni F, Huxol A, Villmer FJ. Approach Towards Surface Improvement in Additively Manufactured Tools. Vol 52. Elsevier BV; 2019:254-259. doi:10.1016/j.ifacol.2019.10.032","van":"Simoni F, Huxol A, Villmer FJ. Approach Towards Surface Improvement in Additively Manufactured Tools. 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS). Amsterdam [u.a.]: Elsevier BV; 2019. (IFAC-PapersOnLine; vol. 52).","havard":"F. Simoni, A. Huxol, F.-J. Villmer, Approach Towards Surface Improvement in Additively Manufactured Tools, Elsevier BV, Amsterdam [u.a.], 2019.","mla":"Simoni, Filippo, et al. “Approach Towards Surface Improvement in Additively Manufactured Tools.” 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS), vol. 52, Elsevier BV, 2019, pp. 254–59, https://doi.org/10.1016/j.ifacol.2019.10.032.","bjps":"Simoni F, Huxol A and Villmer F-J (2019) Approach Towards Surface Improvement in Additively Manufactured Tools. Amsterdam [u.a.]: Elsevier BV.","ufg":"Simoni, Filippo/Huxol, Andrea/Villmer, Franz-Josef: Approach Towards Surface Improvement in Additively Manufactured Tools, Bd. 52, Amsterdam [u.a.] 2019 (IFAC-PapersOnLine).","ieee":"F. Simoni, A. Huxol, and F.-J. Villmer, Approach Towards Surface Improvement in Additively Manufactured Tools, vol. 52. Amsterdam [u.a.]: Elsevier BV, 2019, pp. 254–259. doi: 10.1016/j.ifacol.2019.10.032.","apa":"Simoni, F., Huxol, A., & Villmer, F.-J. (2019). Approach Towards Surface Improvement in Additively Manufactured Tools. In 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS) (Vol. 52, pp. 254–259). Elsevier BV. https://doi.org/10.1016/j.ifacol.2019.10.032","chicago":"Simoni, Filippo, Andrea Huxol, and Franz-Josef Villmer. Approach Towards Surface Improvement in Additively Manufactured Tools. 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS). Vol. 52. IFAC-PapersOnLine. Amsterdam [u.a.]: Elsevier BV, 2019. https://doi.org/10.1016/j.ifacol.2019.10.032."},"volume":52,"title":"Approach Towards Surface Improvement in Additively Manufactured Tools","page":"254-259","status":"public","year":"2019","author":[{"last_name":"Simoni","first_name":"Filippo","full_name":"Simoni, Filippo"},{"id":"43559","last_name":"Huxol","full_name":"Huxol, Andrea","first_name":"Andrea"},{"id":"14290","full_name":"Villmer, Franz-Josef","last_name":"Villmer","first_name":"Franz-Josef"}],"date_updated":"2025-06-26T13:40:36Z","date_created":"2025-04-15T09:32:02Z","publication_identifier":{"issn":["2405-8963"]},"publication":"13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS)","language":[{"iso":"eng"}],"keyword":["Direct rapid tooling","toolmaking","additive manufacturing process chain","process control","production systems","selective laser melting","surface roughness","laser surface re-melting"],"publication_status":"published","series_title":"IFAC-PapersOnLine","publisher":"Elsevier BV","conference":{"start_date":"2019-08-12","end_date":"2019-08-14","location":"Oshawa, CANADA","name":"13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS)"},"department":[{"_id":"DEP7000"}],"abstract":[{"lang":"eng","text":"Additive Manufacturing has arisen as a ground-breaking set of technologies that, thanks to their capability of continuous improvements in performance and cost-efficiency, was able in the last years to replace well-established manufacturing processes. Proficiency in the fabrication of highly complex parts forced this astonishing development. This research is based on the idea that through the integration of additive and conventional manufacturing technologies it is possible to achieve great cost and operational benefits especially in the field of tool making for injection molding. Such an integrated manufacturing solution could overcome the limitations of independent additive, subtractive, and post-processing procedures by strengthening their potentialities. The present study highlights the opportunities of a synergy between the above-mentioned manufacturing technologies for the optimized fabrication of injection molds. An additive manufacturing process chain is presented, and special attention is given to the surface quality and its optimization directly in the Selective Laser Melting process. The potentialities of the Laser Surface Re-melting technique are analyzed, and the process optimization leads to a reduction of 45% of the average roughness directly in the SLM process. (C) 2019, IFAC (International Federation of Automatic Control) Hosting by Elsevier Ltd. All rights reserved."}],"user_id":"83781","intvolume":" 52","type":"conference_editor_article","place":"Amsterdam [u.a.]","doi":"10.1016/j.ifacol.2019.10.032","_id":"12792"},{"doi":"10.1109/tii.2019.2952669","_id":"12834","place":"New York, NY","intvolume":" 16","user_id":"83781","type":"scientific_journal_article","publisher":"Institute of Electrical and Electronics Engineers (IEEE)","issue":"9","abstract":[{"lang":"eng","text":"In the context of Industry 4.0, extensive deployment and application of advanced manufacturing equipment and various sensors is leading to a growing demand for data exchange between different devices. In smart factories, network transmission has multiprotocol features of wired/wireless communication, and different data flows have different real-time requirements. In this article, a heterogeneous network architecture based on software-defined network is proposed for realizing cross-network flexible forwarding of multisource manufacturing data and optimized utilization of network resources. Subsequently, the mechanism of cross-network fusion and scheduling (CNFS) is analyzed from the perspective of high dynamic characteristics and different delay requirements of data flows. Based on this analysis, a route-aware data flow dynamic reconstruction algorithm is proposed. The proposed algorithm improves the efficiency of manufacturing data cross-network fusion, especially for multivariety and small-batch intelligent manufacturing systems. Furthermore, for meeting the bandwidth requirements of different delay flows, a delay-sensitive network bandwidth scheduling algorithm is proposed. Finally, the effectiveness of the proposed CNFS mechanism is verified using a candy packaging intelligent production line prototype platform."}],"department":[{"_id":"DEP5023"}],"publication_status":"published","isi":"1","language":[{"iso":"eng"}],"keyword":["Heterogeneous networks","Real-time systems","Bandwidth","Job shop scheduling","Smart manufacturing","Computer architecture","Cross-network fusion","heterogeneous networks","network resource"],"date_updated":"2025-06-26T13:26:20Z","date_created":"2025-04-23T08:35:16Z","publication":"IEEE Transactions on Industrial Informatics","publication_identifier":{"eissn":["1941-0050"],"issn":["1551-3203"]},"page":"6059-6068","status":"public","external_id":{"isi":["000542966300043"]},"author":[{"first_name":"Jiafu","full_name":"Wan, Jiafu","last_name":"Wan"},{"last_name":"Yang","full_name":"Yang, Jun","first_name":"Jun"},{"first_name":"Shiyong","full_name":"Wang, Shiyong","last_name":"Wang"},{"full_name":"Li, Di","first_name":"Di","last_name":"Li"},{"full_name":"Li, Peng","id":"58937","first_name":"Peng","last_name":"Li"},{"first_name":"Min","last_name":"Xia","full_name":"Xia, Min"}],"year":"2019","volume":16,"citation":{"chicago":"Wan, Jiafu, Jun Yang, Shiyong Wang, Di Li, Peng Li, and Min Xia. “Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory.” IEEE Transactions on Industrial Informatics 16, no. 9 (2019): 6059–68. https://doi.org/10.1109/tii.2019.2952669.","apa":"Wan, J., Yang, J., Wang, S., Li, D., Li, P., & Xia, M. (2019). Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory. IEEE Transactions on Industrial Informatics, 16(9), 6059–6068. https://doi.org/10.1109/tii.2019.2952669","havard":"J. Wan, J. Yang, S. Wang, D. Li, P. Li, M. Xia, Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory, IEEE Transactions on Industrial Informatics. 16 (2019) 6059–6068.","bjps":"Wan J et al. (2019) Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory. IEEE Transactions on Industrial Informatics 16, 6059–6068.","mla":"Wan, Jiafu, et al. “Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory.” IEEE Transactions on Industrial Informatics, vol. 16, no. 9, 2019, pp. 6059–68, https://doi.org/10.1109/tii.2019.2952669.","ufg":"Wan, Jiafu u. a.: Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory, in: IEEE Transactions on Industrial Informatics 16 (2019), H. 9, S. 6059–6068.","van":"Wan J, Yang J, Wang S, Li D, Li P, Xia M. Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory. IEEE Transactions on Industrial Informatics. 2019;16(9):6059–68.","din1505-2-1":"Wan, Jiafu ; Yang, Jun ; Wang, Shiyong ; Li, Di ; Li, Peng ; Xia, Min: Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory. In: IEEE Transactions on Industrial Informatics Bd. 16. New York, NY, Institute of Electrical and Electronics Engineers (IEEE) (2019), Nr. 9, S. 6059–6068","chicago-de":"Wan, Jiafu, Jun Yang, Shiyong Wang, Di Li, Peng Li und Min Xia. 2019. Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory. IEEE Transactions on Industrial Informatics 16, Nr. 9: 6059–6068. doi:10.1109/tii.2019.2952669, .","short":"J. Wan, J. Yang, S. Wang, D. Li, P. Li, M. Xia, IEEE Transactions on Industrial Informatics 16 (2019) 6059–6068.","ieee":"J. Wan, J. Yang, S. Wang, D. Li, P. Li, and M. Xia, “Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory,” IEEE Transactions on Industrial Informatics, vol. 16, no. 9, pp. 6059–6068, 2019, doi: 10.1109/tii.2019.2952669.","ama":"Wan J, Yang J, Wang S, Li D, Li P, Xia M. Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory. IEEE Transactions on Industrial Informatics. 2019;16(9):6059-6068. doi:10.1109/tii.2019.2952669"},"title":"Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory"},{"date_created":"2019-11-25T08:35:47Z","type":"conference","publication":"23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)","date_updated":"2023-03-15T13:49:38Z","user_id":"15514","language":[{"iso":"eng"}],"place":"Torino, Italy","keyword":["Multisensor systems","Temperature measurement","Current measurement","Redundancy","Pollution measurement","Detection algorithms"],"doi":"10.1109/ETFA.2018.8502571","_id":"2007","title":"A Conflict-Based Drift Detection And Adaptation Approach for Multisensor Information Fusion","publication_status":"published","citation":{"ieee":"C.-A. Holst and V. Lohweg, “A Conflict-Based Drift Detection And Adaptation Approach for Multisensor Information Fusion,” in 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Torino, Italy, 2018.","ama":"Holst C-A, Lohweg V. A Conflict-Based Drift Detection And Adaptation Approach for Multisensor Information Fusion. In: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy; 2018. doi:10.1109/ETFA.2018.8502571","chicago-de":"Holst, Christoph-Alexander und Volker Lohweg. 2018. A Conflict-Based Drift Detection And Adaptation Approach for Multisensor Information Fusion. In: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy. doi:10.1109/ETFA.2018.8502571, .","din1505-2-1":"Holst, Christoph-Alexander ; Lohweg, Volker: A Conflict-Based Drift Detection And Adaptation Approach for Multisensor Information Fusion. In: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy, 2018","short":"C.-A. Holst, V. Lohweg, in: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Torino, Italy, 2018.","chicago":"Holst, Christoph-Alexander, and Volker Lohweg. “A Conflict-Based Drift Detection And Adaptation Approach for Multisensor Information Fusion.” In 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy, 2018. https://doi.org/10.1109/ETFA.2018.8502571.","apa":"Holst, C.-A., & Lohweg, V. (2018). A Conflict-Based Drift Detection And Adaptation Approach for Multisensor Information Fusion. In 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy. https://doi.org/10.1109/ETFA.2018.8502571","ufg":"Holst, Christoph-Alexander/Lohweg, Volker (2018): A Conflict-Based Drift Detection And Adaptation Approach for Multisensor Information Fusion, in: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Torino, Italy.","mla":"Holst, Christoph-Alexander, and Volker Lohweg. “A Conflict-Based Drift Detection And Adaptation Approach for Multisensor Information Fusion.” 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2018, doi:10.1109/ETFA.2018.8502571.","bjps":"Holst C-A and Lohweg V (2018) A Conflict-Based Drift Detection And Adaptation Approach for Multisensor Information Fusion. 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy.","havard":"C.-A. Holst, V. Lohweg, A Conflict-Based Drift Detection And Adaptation Approach for Multisensor Information Fusion, in: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Torino, Italy, 2018.","van":"Holst C-A, Lohweg V. A Conflict-Based Drift Detection And Adaptation Approach for Multisensor Information Fusion. In: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy; 2018."},"department":[{"_id":"DEP5023"}],"conference":{"end_date":"2018-09-07","start_date":"2018-09-04","location":"Torino, Italy","name":"IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA) 2018"},"year":2018,"main_file_link":[{"url":"https://ieeexplore.ieee.org/abstract/document/8502571"}],"author":[{"id":"64782","full_name":"Holst, Christoph-Alexander","last_name":"Holst","first_name":"Christoph-Alexander"},{"last_name":"Lohweg","first_name":"Volker","full_name":"Lohweg, Volker","id":"1804","orcid":"0000-0002-3325-7887"}],"abstract":[{"lang":"eng","text":"Multisensor systems are susceptible to sensor ageing effects as well as to environmental changes. Due to these effects, the distribution of sensor measurements may change over time, which is referred to as sensor drift. A multisensor system which adapts to drift by self-monitoring is more durable, requires less manual maintenance, and provides information of higher quality. This contribution proposes an approach for detecting and adapting to sensor drift. The proposed detection algorithm determines the reliability of a sensor based on fuzzy pattern classifiers and a consistency measure. By this means, the inherent redundancy in multisensor systems is exploited to detect drift. Detected drift leads then to a retraining of the classifier on batched data guided by information fusion. The retraining incorporates the estimated magnitude of the drift. The proposed algorithms are evaluated in comparison with state-of-the-art methods in the scope of a publicly available dataset. It is shown that the drift detection algorithm yields results similar to the benchmark algorithm but is less computationally complex. Relearning with the drift-adapted approach results in more robust classifiers with regard to potential future drift."}],"status":"public"},{"user_id":"49010","intvolume":" 72","type":"journal_article","place":"Berlin Heidelberg","doi":"https://doi.org/10.1007/s41449-018-0123-x","_id":"222","publication_status":"published","quality_controlled":"1","publisher":"Springer","department":[{"_id":"DEP7020"},{"_id":"DEP1305"}],"issue":"4","abstract":[{"text":"Die Komplexität in der manuellen Montage steigt. In der sog. Mehrprodukt- oder Variantenmontage hat der Beschäftigte permanent zwischen verschiedenen Alternativen auszuwählen. Dies betrifft z.B. zu montierende Teile, Werkzeuge, Fügeverfahren oder Hilfsmittel, die in ganz unterschiedlichen Kombinationen zu verwenden sind. Der Montageprozess wird dadurch aus Sicht des Beschäftigten zu einem kontinuierlichen Auswahlprozess. Dieser stellt zunehmend höhere informatorische und kognitive Anforderungen und steigert die mentale Beanspruchung. Dies hat negative Auswirkungen auf die Arbeitsproduktivität. Informatorische Assistenzsysteme gelten als geeignete Instrumente, moderierenden Einfluss auf diese Entwicklung zu nehmen. Entscheidende Stellgrößen dabei betreffen Fragen, wie komplex die Anforderungen und wie ausgeprägt die subjektiven Ressourcen sowie die mentalen Beanspruchungen sind. Aus diesen Überlegungen werden Empfehlungen zur Gestaltung von informatorischen Assistenzsystemen abgeleitet.","lang":"ger"},{"lang":"eng","text":"Manual assembly increases in complexity. In the so-called multi-product- or mixed-model-assembly, the employee has to constantly make choices between different alternatives. This concerns e. g. parts to be assembled, tools, fixing methods or materials that can be processed in very different combinations. From the perspective of a worker the assembly process becomes a continuous choice process, setting increasingly higher informational and cognitive demands and increasing mental strain. This has a negative impact on labor productivity. Information Assistance Systems are considered appropriate tools to take moderating influence on this development. However, it should be considered how complex demands are as well as how pronounced subjective resources and mental strain are. Based on these considerations, recommendations for the design of information assistance systems are derived.\r\n\r\nPractical Relevance: Manufacturing industry faces the demanding task of producing more and more product variants even in manual assembly. As a result, assembly workers have to process more information and are therefore exposed to greater stress. In order to avoid the resulting loss of labor productivity, assembly systems are increasingly integrating informational assistance systems that, on the one hand, support cognitive processing and, on the other hand, reduce stress. Various design recommendations are given for such informational assistance systems."}],"date_updated":"2023-03-15T13:49:39Z","related_material":{"link":[{"url":"https://link.springer.com/article/10.1007%2Fs41449-018-0123-x#Abs2","relation":"contains"}]},"date_created":"2018-11-06T13:25:05Z","publication_identifier":{"issn":["0340-2444"]},"publication":"Zeitschrift für Arbeitswissenschaft","project":[{"_id":"FBB6D104-44D9-11E9-AA25-B54CDB794CE1","name":"Montexas 4.0"}],"language":[{"iso":"ger"}],"keyword":["Complexity","Mental workload","Objective measurement","Informational assistance systems","Cognitive ergonomics"],"volume":72,"citation":{"ama":"Bornewasser M, Hinrichsen S, Bläsing D. Informatorische Assistenzsysteme in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung? Zeitschrift für Arbeitswissenschaft. 2018;72(4):264-275. doi:https://doi.org/10.1007/s41449-018-0123-x","ieee":"M. Bornewasser, S. Hinrichsen, and D. Bläsing, “Informatorische Assistenzsysteme in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung?,” Zeitschrift für Arbeitswissenschaft, vol. 72, no. 4, pp. 264–275, 2018.","ufg":"Bornewasser, Manfred et. al. (2018): Informatorische Assistenzsysteme in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung?, in: Zeitschrift für Arbeitswissenschaft 72 (4), S. 264–275.","mla":"Bornewasser, Manfred, et al. “Informatorische Assistenzsysteme in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung?” Zeitschrift für Arbeitswissenschaft, vol. 72, no. 4, Springer, 2018, pp. 264–75, doi:https://doi.org/10.1007/s41449-018-0123-x.","havard":"M. Bornewasser, S. Hinrichsen, D. Bläsing, Informatorische Assistenzsysteme in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung?, Zeitschrift für Arbeitswissenschaft. 72 (2018) 264–275.","bjps":"Bornewasser M, Hinrichsen S and Bläsing D (2018) Informatorische Assistenzsysteme in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung? Zeitschrift für Arbeitswissenschaft 72, 264–275.","van":"Bornewasser M, Hinrichsen S, Bläsing D. Informatorische Assistenzsysteme in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung? Zeitschrift für Arbeitswissenschaft. 2018;72(4):264–75.","chicago":"Bornewasser, Manfred, Sven Hinrichsen, and Dominic Bläsing. “Informatorische Assistenzsysteme in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung?” Zeitschrift für Arbeitswissenschaft 72, no. 4 (2018): 264–75. https://doi.org/10.1007/s41449-018-0123-x.","apa":"Bornewasser, M., Hinrichsen, S., & Bläsing, D. (2018). Informatorische Assistenzsysteme in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung? Zeitschrift für Arbeitswissenschaft, 72(4), 264–275. https://doi.org/10.1007/s41449-018-0123-x","din1505-2-1":"Bornewasser, Manfred ; Hinrichsen, Sven ; Bläsing, Dominic: Informatorische Assistenzsysteme in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung? In: Zeitschrift für Arbeitswissenschaft Bd. 72. Berlin Heidelberg, Springer (2018), Nr. 4, S. 264–275","chicago-de":"Bornewasser, Manfred, Sven Hinrichsen und Dominic Bläsing. 2018. Informatorische Assistenzsysteme in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung? Zeitschrift für Arbeitswissenschaft 72, Nr. 4: 264–275. doi:https://doi.org/10.1007/s41449-018-0123-x, .","short":"M. Bornewasser, S. Hinrichsen, D. Bläsing, Zeitschrift für Arbeitswissenschaft 72 (2018) 264–275."},"title":"Informatorische Assistenzsysteme in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung?","page":"264-275","status":"public","year":2018,"main_file_link":[{"url":"https://link.springer.com/article/10.1007%2Fs41449-018-0123-x#Abs2"}],"author":[{"first_name":"Manfred","last_name":"Bornewasser","full_name":"Bornewasser, Manfred"},{"full_name":"Hinrichsen, Sven","last_name":"Hinrichsen","first_name":"Sven","id":"49010"},{"last_name":"Bläsing","full_name":"Bläsing, Dominic","first_name":"Dominic"}]},{"oa":"1","has_accepted_license":"1","language":[{"iso":"eng"}],"keyword":["Correlation","Wireless communication","Real-time systems","Logic gates","Frequency measurement","Libraries","Time measurement"],"_id":"2372","date_created":"2020-05-18T15:07:56Z","type":"preprint","publication":"arXiv:1805.01236","date_updated":"2023-03-15T13:49:39Z","user_id":"57956","file_date_updated":"2020-05-18T15:08:45Z","main_file_link":[{"open_access":"1","url":"https://arxiv.org/abs/1805.01236"}],"ddc":["620"],"year":2018,"author":[{"first_name":"Niels Hendrik","full_name":"Fliedner, Niels Hendrik","last_name":"Fliedner"},{"full_name":"Block, Dimitri","last_name":"Block","first_name":"Dimitri"},{"full_name":"Meier, Uwe","first_name":"Uwe","last_name":"Meier"}],"abstract":[{"lang":"eng","text":"Novel industrial wireless applications require wideband, real-time channel\r\ncharacterization due to complex multipath propagation. Rapid machine motion\r\nleads to fast time variance of the channel's reflective behavior, which must be\r\ncaptured for radio channel characterization. Additionally, inhomogeneous radio\r\nchannels demand highly flexible measurements. Existing approaches for radio\r\nchannel measurements either lack flexibility or wide-band, real-time\r\nperformance with fast time variance. In this paper, we propose a correlative\r\nchannel sounding approach utilizing a software-defined architecture. The\r\napproach enables real-time, wide-band measurements with fast time variance\r\nimmune to active interference. The desired performance is validated with a\r\ndemanding industrial application example."}],"page":"6","status":"public","title":"A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance","publication_status":"published","file":[{"access_level":"open_access","success":1,"file_id":"2373","file_size":574858,"content_type":"application/pdf","date_created":"2020-05-18T15:08:45Z","file_name":"1805.01236v1.pdf","creator":"zph-yh1","relation":"main_file","date_updated":"2020-05-18T15:08:45Z"}],"citation":{"short":"N.H. Fliedner, D. Block, U. Meier, ArXiv:1805.01236 (2018).","din1505-2-1":"Fliedner, Niels Hendrik ; Block, Dimitri ; Meier, Uwe: A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance. In: arXiv:1805.01236 (2018)","chicago-de":"Fliedner, Niels Hendrik, Dimitri Block und Uwe Meier. 2018. A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance. arXiv:1805.01236.","apa":"Fliedner, N. H., Block, D., & Meier, U. (2018). A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance. ArXiv:1805.01236.","chicago":"Fliedner, Niels Hendrik, Dimitri Block, and Uwe Meier. “A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance.” ArXiv:1805.01236, 2018.","van":"Fliedner NH, Block D, Meier U. A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance. arXiv:1805.01236. 2018.","ufg":"Fliedner, Niels Hendrik et. al. (2018): A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance.","bjps":"Fliedner NH, Block D and Meier U (2018) A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance. arXiv:1805.01236.","havard":"N.H. Fliedner, D. Block, U. Meier, A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance, ArXiv:1805.01236. (2018).","mla":"Fliedner, Niels Hendrik, et al. “A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance.” ArXiv:1805.01236, 2018.","ieee":"N. H. Fliedner, D. Block, and U. Meier, “A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance,” arXiv:1805.01236. 2018.","ama":"Fliedner NH, Block D, Meier U. A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance. arXiv:180501236. 2018."}},{"title":"A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance","citation":{"ieee":"N. H. Fliedner, D. Block, and U. Meier, “A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance,” in 2018 15th International Symposium on Wireless Communication Systems (ISWCS), Lisbon, Portugal, 2018.","ama":"Fliedner NH, Block D, Meier U. A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance. In: 2018 15th International Symposium on Wireless Communication Systems (ISWCS). ; 2018. doi:10.1109/iswcs.2018.8491207","din1505-2-1":"Fliedner, Niels Hendrik ; Block, Dimitri ; Meier, Uwe: A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance. In: 2018 15th International Symposium on Wireless Communication Systems (ISWCS), 2018","chicago-de":"Fliedner, Niels Hendrik, Dimitri Block und Uwe Meier. 2018. A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance. In: 2018 15th International Symposium on Wireless Communication Systems (ISWCS). doi:10.1109/iswcs.2018.8491207, .","short":"N.H. Fliedner, D. Block, U. Meier, in: 2018 15th International Symposium on Wireless Communication Systems (ISWCS), 2018.","chicago":"Fliedner, Niels Hendrik, Dimitri Block, and Uwe Meier. “A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance.” In 2018 15th International Symposium on Wireless Communication Systems (ISWCS), 2018. https://doi.org/10.1109/iswcs.2018.8491207.","apa":"Fliedner, N. H., Block, D., & Meier, U. (2018). A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance. In 2018 15th International Symposium on Wireless Communication Systems (ISWCS). Lisbon, Portugal. https://doi.org/10.1109/iswcs.2018.8491207","bjps":"Fliedner NH, Block D and Meier U (2018) A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance. 2018 15th International Symposium on Wireless Communication Systems (ISWCS).","havard":"N.H. Fliedner, D. Block, U. Meier, A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance, in: 2018 15th International Symposium on Wireless Communication Systems (ISWCS), 2018.","mla":"Fliedner, Niels Hendrik, et al. “A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance.” 2018 15th International Symposium on Wireless Communication Systems (ISWCS), 2018, doi:10.1109/iswcs.2018.8491207.","ufg":"Fliedner, Niels Hendrik et. al. (2018): A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance, in: 2018 15th International Symposium on Wireless Communication Systems (ISWCS).","van":"Fliedner NH, Block D, Meier U. A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance. In: 2018 15th International Symposium on Wireless Communication Systems (ISWCS). 2018."},"publication_status":"published","author":[{"last_name":"Fliedner","full_name":"Fliedner, Niels Hendrik","first_name":"Niels Hendrik"},{"first_name":"Dimitri","full_name":"Block, Dimitri","last_name":"Block"},{"full_name":"Meier, Uwe","last_name":"Meier","first_name":"Uwe"}],"year":2018,"main_file_link":[{"url":"https://ieeexplore.ieee.org/document/8491207"}],"conference":{"end_date":"2018-08-31","start_date":"2018-08-28","name":"2018 15th International Symposium on Wireless Communication Systems (ISWCS)","location":"Lisbon, Portugal"},"department":[{"_id":"DEP5000"}],"abstract":[{"text":"Novel industrial wireless applications require wideband, real-time channel characterization due to complex multipath propagation. Rapid machine motion leads to fast time variance of the channel's reflective behavior, which must be captured for radio channel characterization. Additionally, inhomogeneous radio channels demand highly flexible measurements. Existing approaches for radio channel measurements either lack flexibility or wide-band, real-time performance with fast time variance. In this paper, we propose a correlative channel sounding approach utilizing a software-defined architecture. The approach enables wide-band measurements with fast time variance immune to active interference. Furthermore, its real-time capability allows live processing on demand. The desired performance is validated with a demanding industrial application example.","lang":"eng"}],"status":"public","quality_controlled":"1","publication":"2018 15th International Symposium on Wireless Communication Systems (ISWCS)","publication_identifier":{"isbn":["9781538650059"]},"date_created":"2020-05-18T15:14:53Z","type":"conference","user_id":"57956","date_updated":"2023-03-15T13:49:39Z","keyword":["Correlation","Wireless communication","Real-time systems","Logic gates","Frequency measurement","Libraries","Time measurement"],"language":[{"iso":"eng"}],"_id":"2374","doi":"10.1109/iswcs.2018.8491207"},{"title":"Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling","publication_status":"published","citation":{"short":"N.H. Fliedner, U. Meier, T. Neugebauer, in: 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA), IEEE, 2018.","chicago-de":"Fliedner, Niels Hendrik, Uwe Meier und Thomas Neugebauer. 2018. Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling. In: 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA). IEEE. doi:10.1109/etfa.2018.8502494, .","din1505-2-1":"Fliedner, Niels Hendrik ; Meier, Uwe ; Neugebauer, Thomas: Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling. In: 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA) : IEEE, 2018","van":"Fliedner NH, Meier U, Neugebauer T. Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling. In: 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA). IEEE; 2018.","bjps":"Fliedner NH, Meier U and Neugebauer T (2018) Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling. 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA). IEEE.","havard":"N.H. Fliedner, U. Meier, T. Neugebauer, Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling, in: 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA), IEEE, 2018.","mla":"Fliedner, Niels Hendrik, et al. “Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling.” 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA), IEEE, 2018, doi:10.1109/etfa.2018.8502494.","ufg":"Fliedner, Niels Hendrik et. al. (2018): Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling, in: 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA).","apa":"Fliedner, N. H., Meier, U., & Neugebauer, T. (2018). Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling. In 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA). Turin, Italy: IEEE. https://doi.org/10.1109/etfa.2018.8502494","chicago":"Fliedner, Niels Hendrik, Uwe Meier, and Thomas Neugebauer. “Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling.” In 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA). IEEE, 2018. https://doi.org/10.1109/etfa.2018.8502494.","ama":"Fliedner NH, Meier U, Neugebauer T. Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling. In: 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA). IEEE; 2018. doi:10.1109/etfa.2018.8502494","ieee":"N. H. Fliedner, U. Meier, and T. Neugebauer, “Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling,” in 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA), Turin, Italy, 2018."},"department":[{"_id":"DEP5000"}],"conference":{"location":" Turin, Italy","name":"2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA)","start_date":"2018-09-04","end_date":"2018-09-07"},"main_file_link":[{"url":"https://ieeexplore.ieee.org/document/8502494"}],"author":[{"first_name":"Niels Hendrik","last_name":"Fliedner","full_name":"Fliedner, Niels Hendrik"},{"first_name":"Uwe","full_name":"Meier, Uwe","last_name":"Meier"},{"first_name":"Thomas","last_name":"Neugebauer","full_name":"Neugebauer, Thomas"}],"year":2018,"abstract":[{"lang":"eng","text":"Wireless industrial environments are dominated by multipath propagation and interference. In order to handle spatial diversity, a possible approach is dividing the physical area into many small cells. The spatial diversity is turned into FDMA by utilizing different frequency bands for neighboring cells. A challenging use case with fast vehicles traveling over long distances in a short time is the packaging industry. It would require many fast handoffs for each vehicle. Thus, a small cell FDMA approach is not appropriate. Conversely, employing radiating lines eliminates FDMA-based handoff issues, and reduces multipath delay spread and signal attenuation compared to centralized approaches. Additionally, radiating lines perform well in high-speed, low-power and long-range environments. In this paper, we realize a novel radiating-line-based, high-reliable, real-time transmission system with near-field coupling. This wireless transmission method results in a frequency-flat, time-invariant radio channel for the given requirements. Employing antenna diversity results in significant improvements in the system's performance compared to single antenna solutions."}],"status":"public","quality_controlled":"1","publisher":"IEEE","date_created":"2020-05-18T15:24:02Z","type":"conference","publication_identifier":{"isbn":["9781538671085"]},"publication":"2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA)","date_updated":"2023-03-15T13:49:39Z","user_id":"57956","language":[{"iso":"eng"}],"keyword":["Spatial diversity","Antenna measurements","Real-time systems","Frequency measurement","Couplings","Antennas"],"doi":"10.1109/etfa.2018.8502494","_id":"2376"},{"status":"public","main_file_link":[{"open_access":"1"}],"year":2018,"author":[{"first_name":"Lisa","last_name":"Miekus","full_name":"Miekus, Lisa"},{"last_name":"Bentler","first_name":"Dominik","full_name":"Bentler, Dominik"},{"first_name":"Sascha","last_name":"Jenderny","full_name":"Jenderny, Sascha"},{"last_name":"Foullois","first_name":"Marc","full_name":"Foullois, Marc"},{"last_name":"Wöste","first_name":"Lars","full_name":"Wöste, Lars"},{"last_name":"Röcker","full_name":"Röcker, Carsten","first_name":"Carsten","id":"61525"},{"first_name":"Günter W.","last_name":"Maier","full_name":"Maier, Günter W."}],"citation":{"ieee":"L. Miekus et al., “Development of a Change Management Instrument for the Implementation of Technologies,” Technologies : open access journal , vol. 6, no. 120, 2018.","ama":"Miekus L, Bentler D, Jenderny S, et al. Development of a Change Management Instrument for the Implementation of Technologies. Technologies : open access journal . 2018;6(120). doi:10.3390/technologies6040120","chicago-de":"Miekus, Lisa, Dominik Bentler, Sascha Jenderny, Marc Foullois, Lars Wöste, Carsten Röcker und Günter W. Maier. 2018. Development of a Change Management Instrument for the Implementation of Technologies. Technologies : open access journal 6, Nr. 120. doi:10.3390/technologies6040120, .","din1505-2-1":"Miekus, Lisa ; Bentler, Dominik ; Jenderny, Sascha ; Foullois, Marc ; Wöste, Lars ; Röcker, Carsten ; Maier, Günter W.: Development of a Change Management Instrument for the Implementation of Technologies. In: Technologies : open access journal Bd. 6. Basel, MDPI (2018), Nr. 120","short":"L. Miekus, D. Bentler, S. Jenderny, M. Foullois, L. Wöste, C. Röcker, G.W. Maier, Technologies : Open Access Journal 6 (2018).","chicago":"Miekus, Lisa, Dominik Bentler, Sascha Jenderny, Marc Foullois, Lars Wöste, Carsten Röcker, and Günter W. Maier. “Development of a Change Management Instrument for the Implementation of Technologies.” Technologies : Open Access Journal 6, no. 120 (2018). https://doi.org/10.3390/technologies6040120.","apa":"Miekus, L., Bentler, D., Jenderny, S., Foullois, M., Wöste, L., Röcker, C., & Maier, G. W. (2018). Development of a Change Management Instrument for the Implementation of Technologies. Technologies : Open Access Journal , 6(120). https://doi.org/10.3390/technologies6040120","ufg":"Miekus, Lisa et. al. (2018): Development of a Change Management Instrument for the Implementation of Technologies, in: Technologies : open access journal 6 (120).","bjps":"Miekus L et al. (2018) Development of a Change Management Instrument for the Implementation of Technologies. Technologies : open access journal 6.","mla":"Miekus, Lisa, et al. “Development of a Change Management Instrument for the Implementation of Technologies.” Technologies : Open Access Journal , vol. 6, no. 120, MDPI , 2018, doi:10.3390/technologies6040120.","havard":"L. Miekus, D. Bentler, S. Jenderny, M. Foullois, L. Wöste, C. Röcker, G.W. Maier, Development of a Change Management Instrument for the Implementation of Technologies, Technologies : Open Access Journal . 6 (2018).","van":"Miekus L, Bentler D, Jenderny S, Foullois M, Wöste L, Röcker C, et al. Development of a Change Management Instrument for the Implementation of Technologies. Technologies : open access journal . 2018;6(120)."},"volume":6,"title":"Development of a Change Management Instrument for the Implementation of Technologies","keyword":["digitization","change management","scenarios of digitized work","product engineering","sociotechnical systems"],"language":[{"iso":"eng"}],"oa":"1","date_updated":"2023-03-15T13:49:51Z","publication_identifier":{"issn":["2227-7080"]},"publication":"Technologies : open access journal ","date_created":"2021-01-08T08:26:15Z","publisher":"MDPI ","department":[{"_id":"DEP5023"}],"abstract":[{"text":"The manufacturing industry is increasingly being dominated by information and communication technology, leading to the development of cyber-physical systems. Most existing frameworks on the assessment of such technological advancements see the technology as a solitary system. However, research has shown that other environmental factors like organizational processes or human factors are also affected. Drawing on the sociotechnical systems approach, future technologies could be evaluated using scenarios of digitized work. These scenarios can help classify new technologies and uncover their advantages and constraints in order to provide guidance for the digital development of organizations. We developed an instrument for evaluating scenarios of digitized work on the relevant dimensions ‘technology’, ‘human’ and ‘organization’ and conducted a quantitative study applying this instrument on three different scenarios (N = 24 subject matter experts). Results show that our instrument is capable of measuring technological, human and organizational aspects of technology implementations and detecting differences in the scenarios under investigation. The instrument’s practical value is significant as it enables the user to compare and quantify scenarios and helps companies to decide which technology they should implement.","lang":"eng"}],"issue":"120","publication_status":"published","place":"Basel","_id":"4316","doi":"10.3390/technologies6040120","user_id":"15514","intvolume":" 6","type":"journal_article"},{"user_id":"15514","intvolume":" 11015","type":"conference","place":"Cham","_id":"4318","doi":"10.1007/978-3-319-99740-7_16","publication_status":"published","series_title":"Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI","publisher":"Springer","conference":{"name":"International Cross-Domain Conference, CD-MAKE 2018","location":"Hamburg","start_date":"2018-08-27","end_date":"2018-08-30"},"department":[{"_id":"DEP5023"}],"abstract":[{"lang":"eng","text":"Recent advances in the field of industrial digitization and automation lead to an increasing need for assistance systems to support workers in various fields of activity, such as assembly, logistics and maintenance. Current assistance systems for the maintenance area are usually based on a single visualization technology. However, in our view, this is not practicable in terms of real activities, as these operations involve various subtasks for which different interaction concepts would be advantageous. Therefore, in this paper, we propose a concept for a multi-device assistive system, which combines multiple devices to provide workers with relevant information over different subtasks of a maintenance operation and present our first prototype for such a system."}],"date_updated":"2023-03-15T13:49:52Z","editor":[{"first_name":"Andreas","full_name":"Holzinger, Andreas","last_name":"Holzinger"},{"first_name":"Peter","full_name":"Kieseberg, Peter","last_name":"Kieseberg"},{"last_name":"Tjoa","first_name":"A Min","full_name":"Tjoa, A Min"},{"full_name":"Weippl, Edgar","first_name":"Edgar","last_name":"Weippl"}],"publication_identifier":{"isbn":["978-3-319-99739-1"],"eisbn":["978-1-4503-6390-7"]},"publication":"Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018","date_created":"2021-01-08T08:26:18Z","keyword":["Human-machine-interaction","Multimodal feedback","Assistive systems","Augmented-reality","Smart factory"],"language":[{"iso":"eng"}],"oa":"1","citation":{"ama":"Heinz M, Dhiman H, Röcker C. A Multi-Device Assistive System for Industrial Maintenance Operations. In: Holzinger A, Kieseberg P, Tjoa AM, Weippl E, eds. Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018. Vol 11015. Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI. Cham: Springer; 2018:239-247. doi:10.1007/978-3-319-99740-7_16","ieee":"M. Heinz, H. Dhiman, and C. Röcker, “A Multi-Device Assistive System for Industrial Maintenance Operations,” in Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, Hamburg, 2018, vol. 11015, pp. 239–247.","mla":"Heinz, Mario, et al. “A Multi-Device Assistive System for Industrial Maintenance Operations.” Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, edited by Andreas Holzinger et al., vol. 11015, Springer, 2018, pp. 239–47, doi:10.1007/978-3-319-99740-7_16.","bjps":"Heinz M, Dhiman H and Röcker C (2018) A Multi-Device Assistive System for Industrial Maintenance Operations. In Holzinger A et al. (eds), Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, vol. 11015. Cham: Springer, pp. 239–247.","havard":"M. Heinz, H. Dhiman, C. Röcker, A Multi-Device Assistive System for Industrial Maintenance Operations, in: A. Holzinger, P. Kieseberg, A.M. Tjoa, E. Weippl (Eds.), Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, Springer, Cham, 2018: pp. 239–247.","ufg":"Heinz, Mario et. al. (2018): A Multi-Device Assistive System for Industrial Maintenance Operations, in: Andreas Holzinger et. al. (Hgg.): Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018 (=Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI 11015), Cham, S. 239–247.","van":"Heinz M, Dhiman H, Röcker C. A Multi-Device Assistive System for Industrial Maintenance Operations. In: Holzinger A, Kieseberg P, Tjoa AM, Weippl E, editors. Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 84, 89, TC 12/WG 129 International Cross-Domain Conference, CD-MAKE 2018. Cham: Springer; 2018. p. 239–47. (Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI; vol. 11015).","chicago":"Heinz, Mario, Hitesh Dhiman, and Carsten Röcker. “A Multi-Device Assistive System for Industrial Maintenance Operations.” In Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, edited by Andreas Holzinger, Peter Kieseberg, A Min Tjoa, and Edgar Weippl, 11015:239–47. Lecture Notes in Computer Science / Information Systems and Applications, Incl. Internet/Web, and HCI. Cham: Springer, 2018. https://doi.org/10.1007/978-3-319-99740-7_16.","apa":"Heinz, M., Dhiman, H., & Röcker, C. (2018). A Multi-Device Assistive System for Industrial Maintenance Operations. In A. Holzinger, P. Kieseberg, A. M. Tjoa, & E. Weippl (Eds.), Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018 (Vol. 11015, pp. 239–247). Cham: Springer. https://doi.org/10.1007/978-3-319-99740-7_16","chicago-de":"Heinz, Mario, Hitesh Dhiman und Carsten Röcker. 2018. A Multi-Device Assistive System for Industrial Maintenance Operations. In: Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, hg. von Andreas Holzinger, Peter Kieseberg, A Min Tjoa, und Edgar Weippl, 11015:239–247. Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI. Cham: Springer. doi:10.1007/978-3-319-99740-7_16, .","din1505-2-1":"Heinz, Mario ; Dhiman, Hitesh ; Röcker, Carsten: A Multi-Device Assistive System for Industrial Maintenance Operations. In: Holzinger, A. ; Kieseberg, P. ; Tjoa, A. M. ; Weippl, E. (Hrsg.): Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI. Bd. 11015. Cham : Springer, 2018, S. 239–247","short":"M. Heinz, H. Dhiman, C. Röcker, in: A. Holzinger, P. Kieseberg, A.M. Tjoa, E. Weippl (Eds.), Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, Springer, Cham, 2018, pp. 239–247."},"volume":11015,"title":"A Multi-Device Assistive System for Industrial Maintenance Operations","status":"public","page":"239 - 247","author":[{"first_name":"Mario","full_name":"Heinz, Mario","id":"68913","last_name":"Heinz"},{"first_name":"Hitesh","id":"71767","full_name":"Dhiman, Hitesh","last_name":"Dhiman"},{"last_name":"Röcker","first_name":"Carsten","id":"61525","full_name":"Röcker, Carsten"}],"year":2018,"main_file_link":[{"open_access":"1"}]},{"place":"Cham","_id":"4324","doi":"10.1007/978-3-319-99740-7_17","type":"conference","user_id":"15514","intvolume":" 11015","department":[{"_id":"DEP5023"}],"conference":{"start_date":"2018-08-27","end_date":"2018-08-30","name":" International Cross-Domain Conference, CD-MAKE 2018","location":"Hamburg"},"abstract":[{"text":"On the long term, the current wave of digitization and automation in the industrial environment will result in a progressively higher complexity and heterogeneity in the industrial environment. In this context, a growing need arises for the development of digital assistance systems to support workers in various fields of activities. Current systems are generally limited to visualizations and visual feedback. Therefore, in the scope of this paper, we take a look at the major challenges and opportunities for the integration of multimodal feedback systems in today’s and future industrial environments. It shows that the integration of multimodal feedback is subject to a complex combination of technical, user-cenric and legal aspects.","lang":"eng"}],"publisher":"Springer","series_title":"Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI","publication_status":"published","oa":"1","keyword":["Human-machine-interaction","Multimodal feedback","Assistive systems","Augmented-reality","Smart factory"],"language":[{"iso":"eng"}],"publication_identifier":{"isbn":["978-3-319-99739-1"],"eisbn":["978-3-319-99740-7"]},"publication":"Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018","date_created":"2021-01-08T08:26:26Z","date_updated":"2023-03-15T13:49:52Z","editor":[{"first_name":"Andreas","last_name":"Holzinger","full_name":"Holzinger, Andreas"},{"last_name":" Kieseberg","first_name":"Peter","full_name":" Kieseberg, Peter"},{"first_name":"A Min","full_name":"Tjoa, A Min","last_name":"Tjoa"},{"last_name":"Weippl","first_name":"Edgar","full_name":"Weippl, Edgar"}],"year":2018,"author":[{"full_name":"Heinz, Mario","id":"68913","last_name":"Heinz","first_name":"Mario"},{"last_name":"Röcker","first_name":"Carsten","full_name":"Röcker, Carsten","id":"61525"}],"main_file_link":[{"open_access":"1"}],"status":"public","title":"Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities","citation":{"ama":"Heinz M, Röcker C. Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities. In: Holzinger A, Kieseberg P, Tjoa AM, Weippl E, eds. Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018. Vol 11015. Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI. Cham: Springer; 2018. doi:10.1007/978-3-319-99740-7_17","ieee":"M. Heinz and C. Röcker, “Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities,” in Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, Hamburg, 2018, vol. 11015.","short":"M. Heinz, C. Röcker, in: A. Holzinger, P. Kieseberg, A.M. Tjoa, E. Weippl (Eds.), Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, Springer, Cham, 2018.","din1505-2-1":"Heinz, Mario ; Röcker, Carsten: Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities. In: Holzinger, A. ; Kieseberg, P. ; Tjoa, A. M. ; Weippl, E. (Hrsg.): Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI. Bd. 11015. Cham : Springer, 2018","chicago-de":"Heinz, Mario und Carsten Röcker. 2018. Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities. In: Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, hg. von Andreas Holzinger, Peter Kieseberg, A Min Tjoa, und Edgar Weippl, 11015:. Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI. Cham: Springer. doi:10.1007/978-3-319-99740-7_17, .","van":"Heinz M, Röcker C. Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities. In: Holzinger A, Kieseberg P, Tjoa AM, Weippl E, editors. Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 84, 89, TC 12/WG 129 International Cross-Domain Conference, CD-MAKE 2018. Cham: Springer; 2018. (Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI; vol. 11015).","mla":"Heinz, Mario, and Carsten Röcker. “Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities.” Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, edited by Andreas Holzinger et al., vol. 11015, Springer, 2018, doi:10.1007/978-3-319-99740-7_17.","bjps":"Heinz M and Röcker C (2018) Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities. In Holzinger A et al. (eds), Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, vol. 11015. Cham: Springer.","havard":"M. Heinz, C. Röcker, Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities, in: A. Holzinger, P. Kieseberg, A.M. Tjoa, E. Weippl (Eds.), Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, Springer, Cham, 2018.","ufg":"Heinz, Mario/Röcker, Carsten (2018): Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities, in: Andreas Holzinger et. al. (Hgg.): Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018 (=Lecture Notes in Computer Science / Information Systems and Applications, incl. Internet/Web, and HCI 11015), Cham.","apa":"Heinz, M., & Röcker, C. (2018). Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities. In A. Holzinger, P. Kieseberg, A. M. Tjoa, & E. Weippl (Eds.), Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018 (Vol. 11015). Cham: Springer. https://doi.org/10.1007/978-3-319-99740-7_17","chicago":"Heinz, Mario, and Carsten Röcker. “Feedback Presentation for Workers in Industrial Environments–Challenges and Opportunities.” In Machine Learning and Knowledge Extraction :Second IFIP TC 5, TC 8/WG 8.4, 8.9, TC 12/WG 12.9 International Cross-Domain Conference, CD-MAKE 2018, edited by Andreas Holzinger, Peter Kieseberg, A Min Tjoa, and Edgar Weippl, Vol. 11015. Lecture Notes in Computer Science / Information Systems and Applications, Incl. Internet/Web, and HCI. Cham: Springer, 2018. https://doi.org/10.1007/978-3-319-99740-7_17."},"volume":11015},{"series_title":"Procedia Manufacturing","publication_status":"published","conference":{"start_date":"2018-06-19","end_date":"20218-06-20","location":"Hannover","name":"4th International Conference on System-Integrated Intelligence - Intelligent, Flexible and Connected Systems in Products and Production"},"department":[{"_id":"DEP7022"},{"_id":"DEP1306"}],"abstract":[{"text":"The digitization of the industry requires smart products and services. Smart products are mechatronic products with an increasing amount of software. To get high quality smart products to the market quickly, manufacturers need to reshape their product lifecycle processes. They need to apply system engineering-based methods to enable smooth cross-domain developments with a special focus on the software domain. One significant challenge faced by manufacturers is the harmonization of product lifecycle management (PLM), which addresses the hardware lifecycle, with application lifecycle management (ALM), which addresses the software lifecycle.\r\n\r\nTo support manufacturers in this challenging activity, this paper demonstrates a proven process for developing use cases and requirements associated with a PLM/ALM integration. This process has been elicited during an industrial case study in a manufacturing company. This paper explains this process in detail. A generally applicable approach for developing the requirements of a PLM/ALM integration is extracted by removing the company-specific factors. ","lang":"eng"}],"publisher":"Elsevier BV","type":"conference_editor_article","user_id":"83781","intvolume":" 24","place":"Amsterdam [u.a.]","doi":"10.1016/j.promfg.2018.06.020","_id":"12798","title":"Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study","citation":{"ieee":"A. Deuter, A. Otte, M. Ebert, and F. Possel-Dölken, Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study, vol. 24. Amsterdam [u.a.]: Elsevier BV, 2018, pp. 107–113. doi: 10.1016/j.promfg.2018.06.020.","ama":"Deuter A, Otte A, Ebert M, Possel-Dölken F. Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study. Vol 24. (Denkena B, Thoben KD, Trachtler A, eds.). Elsevier BV; 2018:107-113. doi:10.1016/j.promfg.2018.06.020","chicago-de":"Deuter, Andreas, Andreas Otte, Marcel Ebert und Frank Possel-Dölken. 2018. Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study. Hg. von B. Denkena, K. D. Thoben, und A. Trachtler. 4th International Conference on System-Integrated Intelligence - Intelligent, Flexible and Connected Systems in Products and Production. Bd. 24. Procedia Manufacturing. Amsterdam [u.a.]: Elsevier BV. doi:10.1016/j.promfg.2018.06.020, .","din1505-2-1":"Deuter, Andreas ; Otte, Andreas ; Ebert, Marcel ; Possel-Dölken, Frank ; Denkena, B. ; Thoben, K. D. ; Trachtler, A. (Hrsg.): Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study, Procedia Manufacturing. Bd. 24. Amsterdam [u.a.] : Elsevier BV, 2018","short":"A. Deuter, A. Otte, M. Ebert, F. Possel-Dölken, Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study, Elsevier BV, Amsterdam [u.a.], 2018.","chicago":"Deuter, Andreas, Andreas Otte, Marcel Ebert, and Frank Possel-Dölken. Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study. Edited by B. Denkena, K. D. Thoben, and A. Trachtler. 4th International Conference on System-Integrated Intelligence - Intelligent, Flexible and Connected Systems in Products and Production. Vol. 24. Procedia Manufacturing. Amsterdam [u.a.]: Elsevier BV, 2018. https://doi.org/10.1016/j.promfg.2018.06.020.","apa":"Deuter, A., Otte, A., Ebert, M., & Possel-Dölken, F. (2018). Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study. In B. Denkena, K. D. Thoben, & A. Trachtler (Eds.), 4th International Conference on System-Integrated Intelligence - Intelligent, Flexible and Connected Systems in Products and Production (Vol. 24, pp. 107–113). Elsevier BV. https://doi.org/10.1016/j.promfg.2018.06.020","ufg":"Deuter, Andreas u. a.: Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study, Bd. 24, hg. von Denkena, B./Thoben, K.D./Trachtler, A., Amsterdam [u.a.] 2018 (Procedia Manufacturing).","bjps":"Deuter A et al. (2018) Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study, Denkena B, Thoben KD and Trachtler A (eds). Amsterdam [u.a.]: Elsevier BV.","havard":"A. Deuter, A. Otte, M. Ebert, F. Possel-Dölken, Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study, Elsevier BV, Amsterdam [u.a.], 2018.","mla":"Deuter, Andreas, et al. “Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study.” 4th International Conference on System-Integrated Intelligence - Intelligent, Flexible and Connected Systems in Products and Production, edited by B. Denkena et al., vol. 24, Elsevier BV, 2018, pp. 107–13, https://doi.org/10.1016/j.promfg.2018.06.020.","van":"Deuter A, Otte A, Ebert M, Possel-Dölken F. Developing the Requirements of a PLM/ALM Integration: An Industrial Case Study. Denkena B, Thoben KD, Trachtler A, editors. 4th International Conference on System-Integrated Intelligence - Intelligent, Flexible and Connected Systems in Products and Production. Amsterdam [u.a.]: Elsevier BV; 2018. (Procedia Manufacturing; vol. 24)."},"volume":24,"author":[{"orcid":"0000-0002-6529-6215","first_name":"Andreas","last_name":"Deuter","id":"62088","full_name":"Deuter, Andreas"},{"first_name":"Andreas","last_name":"Otte","full_name":"Otte, Andreas","id":"51466"},{"full_name":"Ebert, Marcel","last_name":"Ebert","first_name":"Marcel"},{"last_name":"Possel-Dölken","full_name":"Possel-Dölken, Frank","first_name":"Frank"}],"year":"2018","page":"107-113","status":"public","date_created":"2025-04-15T12:50:25Z","publication_identifier":{"issn":["2351-9789"]},"publication":"4th International Conference on System-Integrated Intelligence - Intelligent, Flexible and Connected Systems in Products and Production","date_updated":"2025-06-26T13:39:42Z","editor":[{"full_name":"Denkena, B.","first_name":"B.","last_name":"Denkena"},{"full_name":"Thoben, K. D. ","last_name":"Thoben","first_name":"K. D. "},{"last_name":"Trachtler","first_name":"A.","full_name":"Trachtler, A."}],"language":[{"iso":"eng"}],"keyword":["Product lifecycle management","Application Lifecycle Management","Smart products","Systems engineering"]},{"type":"journal_article","intvolume":" 245","user_id":"83781","_id":"11576","publication_status":"published","abstract":[{"text":"Data dictionaries provide structural meta-information about data definitions in health information technology (HIT) systems. In this regard, reusing healthcare data for secondary purposes offers several advantages (e.g. reduce documentation times or increased data quality). Prerequisites for data reuse are its quality, availability and identical meaning of data. In diverse projects, research data warehouses serve as core components between heterogeneous clinical databases and various research applications. Given the complexity (high number of data elements) and dynamics (regular updates) of electronic health record (EHR) data structures, we propose a clinical metadata warehouse (CMDW) based on a metadata registry standard. Metadata of two large hospitals were automatically inserted into two CMDWs containing 16,230 forms and 310,519 data elements. Automatic updates of metadata are possible as well as semantic annotations. A CMDW allows metadata discovery, data quality assessment and similarity analyses. Common data models for distributed research networks can be established based on similarity analyses.","lang":"eng"}],"department":[{"_id":"DEP5024"}],"publication_identifier":{"issn":["0926-9630"],"eissn":["1879-8365"]},"publication":"Studies in health technology and informatics","date_created":"2024-06-24T07:36:24Z","date_updated":"2024-07-18T13:42:49Z","keyword":["Information Systems","Metadata","Semantics"],"language":[{"iso":"eng"}],"title":"What Information Does Your EHR Contain? Automatic Generation of a Clinical Metadata Warehouse (CMDW) to Support Identification and Data Access Within Distributed Clinical Research Networks.","extern":"1","volume":245,"citation":{"ama":"Bruland P, Doods J, Storck M, Dugas M. What Information Does Your EHR Contain? Automatic Generation of a Clinical Metadata Warehouse (CMDW) to Support Identification and Data Access Within Distributed Clinical Research Networks. Studies in health technology and informatics. 2017;245:313-317.","van":"Bruland P, Doods J, Storck M, Dugas M. What Information Does Your EHR Contain? Automatic Generation of a Clinical Metadata Warehouse (CMDW) to Support Identification and Data Access Within Distributed Clinical Research Networks. Studies in health technology and informatics. 2017;245:313–7.","havard":"P. Bruland, J. Doods, M. Storck, M. Dugas, What Information Does Your EHR Contain? Automatic Generation of a Clinical Metadata Warehouse (CMDW) to Support Identification and Data Access Within Distributed Clinical Research Networks., Studies in Health Technology and Informatics. 245 (2017) 313–317.","bjps":"Bruland P et al. (2017) What Information Does Your EHR Contain? Automatic Generation of a Clinical Metadata Warehouse (CMDW) to Support Identification and Data Access Within Distributed Clinical Research Networks. Studies in health technology and informatics 245, 313–317.","mla":"Bruland, Philipp, et al. “What Information Does Your EHR Contain? Automatic Generation of a Clinical Metadata Warehouse (CMDW) to Support Identification and Data Access Within Distributed Clinical Research Networks.” Studies in Health Technology and Informatics, vol. 245, 2017, pp. 313–17.","ufg":"Bruland, Philipp u. a.: What Information Does Your EHR Contain? Automatic Generation of a Clinical Metadata Warehouse (CMDW) to Support Identification and Data Access Within Distributed Clinical Research Networks., in: Studies in health technology and informatics 245 (2017), S. 313–317.","ieee":"P. Bruland, J. Doods, M. Storck, and M. Dugas, “What Information Does Your EHR Contain? Automatic Generation of a Clinical Metadata Warehouse (CMDW) to Support Identification and Data Access Within Distributed Clinical Research Networks.,” Studies in health technology and informatics, vol. 245, pp. 313–317, 2017.","apa":"Bruland, P., Doods, J., Storck, M., & Dugas, M. (2017). What Information Does Your EHR Contain? Automatic Generation of a Clinical Metadata Warehouse (CMDW) to Support Identification and Data Access Within Distributed Clinical Research Networks. Studies in Health Technology and Informatics, 245, 313–317.","chicago":"Bruland, Philipp, J Doods, M Storck, and M Dugas. “What Information Does Your EHR Contain? Automatic Generation of a Clinical Metadata Warehouse (CMDW) to Support Identification and Data Access Within Distributed Clinical Research Networks.” Studies in Health Technology and Informatics 245 (2017): 313–17.","short":"P. Bruland, J. Doods, M. Storck, M. Dugas, Studies in Health Technology and Informatics 245 (2017) 313–317.","din1505-2-1":"Bruland, Philipp ; Doods, J ; Storck, M ; Dugas, M: What Information Does Your EHR Contain? Automatic Generation of a Clinical Metadata Warehouse (CMDW) to Support Identification and Data Access Within Distributed Clinical Research Networks. In: Studies in health technology and informatics Bd. 245 (2017), S. 313–317","chicago-de":"Bruland, Philipp, J Doods, M Storck und M Dugas. 2017. What Information Does Your EHR Contain? Automatic Generation of a Clinical Metadata Warehouse (CMDW) to Support Identification and Data Access Within Distributed Clinical Research Networks. Studies in health technology and informatics 245: 313–317."},"external_id":{"pmid":["29295106"]},"author":[{"full_name":"Bruland, Philipp","first_name":"Philipp","id":"75847","last_name":"Bruland","orcid":"0000-0001-6939-7630"},{"full_name":"Doods, J","last_name":"Doods","first_name":"J"},{"first_name":"M","last_name":"Storck","full_name":"Storck, M"},{"first_name":"M","last_name":"Dugas","full_name":"Dugas, M"}],"year":"2017","status":"public","pmid":"1","page":"313-317"},{"user_id":"74004","type":"conference","place":"Danvers","_id":"265","doi":"https://doi.org/10.1109/IEEM.2017.8290157","quality_controlled":"1","ddc":["620"],"conference":{"name":"IEEE International Conference on Industrial Engineering and Engineering Management ","location":"Singapore","start_date":"2017-12-10","end_date":"2017-12-13"},"department":[{"_id":"DEP7020"},{"_id":"DEP1305"}],"issue":"1","abstract":[{"lang":"eng","text":"The maintenance of a tool for injection molding or forming is usually accompanied by its disassembly and assembly. The duration of the assembly activities is often a large part of the total activity time for the maintenance of the tool. The degree of performance of the employees in the execution of these disassembly and assembly activities is often low. In addition, allowances occur (e.g. searching for work equipment). At the Industrial Engineering Lab of the Ostwestfalen-Lippe University of Applied Sciences, a prototype of an assistance system was developed to support the assembly activities in toolmaking. With the help of this system, the operator is guided step by step through the assembly process. The economic potential of the system exists in the reduction of training times, the avoidance of assembly errors and the increase of labor productivity."}],"date_updated":"2023-03-15T13:49:41Z","corporate_editor":["IEEE/ IEEM"],"publication_identifier":{"isbn":["978-1-5386-0948-4 "]},"publication":"2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM)","date_created":"2018-11-26T11:59:27Z","keyword":["injection moulding","machine tools","maintenance engineering","productivity","projection-based assistance system","injection molding tools","assembly activities","assembly process","assembly errors","tool maintenance","disassembly activities","economic potential","Industrial Engineering Lab","Ostwestfalen-Lippe University of Applied Sciences","toolmaking","Tools","Injection molding","Maintenance engineering","Usability","Task analysis","Workstations","Morphology","assembly assistance systems","assistance systems","maintenance of injection molding tools","manual assembly"],"language":[{"iso":"eng"}],"citation":{"ieee":"S. Hinrichsen, D. Riediger, and A. Unrau, “Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools,” in 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Singapore, 2017, no. 1, pp. 1571–1575.","ama":"Hinrichsen S, Riediger D, Unrau A. Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools. In: IEEE/ IEEM, ed. 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). Danvers; 2017:1571-1575. doi:https://doi.org/10.1109/IEEM.2017.8290157","chicago-de":"Hinrichsen, Sven, Daniel Riediger und Alexander Unrau. 2017. Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools. In: 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), hg. von IEEE/ IEEM, 1571–1575. Danvers. doi:https://doi.org/10.1109/IEEM.2017.8290157, .","din1505-2-1":"Hinrichsen, Sven ; Riediger, Daniel ; Unrau, Alexander: Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools. In: IEEE/ IEEM (Hrsg.): 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). Danvers, 2017, S. 1571–1575","short":"S. Hinrichsen, D. Riediger, A. Unrau, in: IEEE/ IEEM (Ed.), 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Danvers, 2017, pp. 1571–1575.","chicago":"Hinrichsen, Sven, Daniel Riediger, and Alexander Unrau. “Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools.” In 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), edited by IEEE/ IEEM, 1571–75. Danvers, 2017. https://doi.org/10.1109/IEEM.2017.8290157.","apa":"Hinrichsen, S., Riediger, D., & Unrau, A. (2017). Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools. In IEEE/ IEEM (Ed.), 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) (pp. 1571–1575). Danvers. https://doi.org/10.1109/IEEM.2017.8290157","mla":"Hinrichsen, Sven, et al. “Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools.” 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), edited by IEEE/ IEEM, no. 1, 2017, pp. 1571–75, doi:https://doi.org/10.1109/IEEM.2017.8290157.","bjps":"Hinrichsen S, Riediger D and Unrau A (2017) Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools. In IEEE/ IEEM (ed.), 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). Danvers, pp. 1571–1575.","havard":"S. Hinrichsen, D. Riediger, A. Unrau, Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools, in: IEEE/ IEEM (Ed.), 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Danvers, 2017: pp. 1571–1575.","ufg":"Hinrichsen, Sven et. al. (2017): Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools, in: IEEE/ IEEM (Hg.): 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Danvers, S. 1571–1575.","van":"Hinrichsen S, Riediger D, Unrau A. Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools. In: IEEE/ IEEM, editor. 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). Danvers; 2017. p. 1571–5."},"title":"Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools","status":"public","page":"1571-1575","year":2017,"author":[{"last_name":"Hinrichsen","full_name":"Hinrichsen, Sven","id":"49010","first_name":"Sven"},{"full_name":"Riediger, Daniel","last_name":"Riediger","first_name":"Daniel","id":"52263"},{"full_name":"Unrau, Alexander","first_name":"Alexander","id":"64690","last_name":"Unrau"}]},{"type":"conference","user_id":"15514","intvolume":" 10410","place":"Cham","doi":"10.1007/978-3-319-66808-6_5","_id":"4255","series_title":"Lecture Notes in Computer Science ","publication_status":"published","conference":{"start_date":"2017-08-29","end_date":"2017-09-01","location":"Reggio, Italy","name":"International Cross-Domain Conference, CD-MAKE 2017"},"department":[{"_id":"DEP5023"}],"abstract":[{"text":"Increasingly, production processes are enabled and controlled by Information Technology (IT), a development being also referred to as “Industry 4.0”. IT thereby contributes to flexible and adaptive production processes, and in this sense factories become “smart factories”. In line with this, IT also more and more supports human workers via various assistance systems. This support aims to both support workers to better execute their tasks and to reduce the effort and time required when working. However, due to the large spectrum of assistance systems, it is hard to acquire an overview and to select an adequate system for a smart factory based on meaningful criteria. We therefore synthesize a set of comparison criteria into a consistent framework and demonstrate the application of our framework by classifying three examples.","lang":"eng"}],"publisher":"Springer","date_created":"2020-12-10T13:40:05Z","publication_identifier":{"eisbn":["9783319668086 "],"isbn":["978-3-319-66807-9"]},"publication":" Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings","date_updated":"2023-03-15T13:49:51Z","editor":[{"first_name":"Andreas","last_name":"Holzinger","full_name":"Holzinger, Andreas"}],"oa":"1","language":[{"iso":"eng"}],"keyword":["Assistance systems","Smart factory","Production processes"],"title":"Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories","citation":{"ieee":"M. Fellmann, S. Robert, S. Büttner, H. Mucha, and C. Röcker, “Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories,” in Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, Reggio, Italy, 2017, vol. 10410, pp. 59–68.","ama":"Fellmann M, Robert S, Büttner S, Mucha H, Röcker C. Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories. In: Holzinger A, ed. Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings. Vol 10410. Lecture Notes in Computer Science . Cham: Springer; 2017:59-68. doi:10.1007/978-3-319-66808-6_5","chicago":"Fellmann, Michael, Sebastian Robert, Sebastian Büttner, Henrik Mucha, and Carsten Röcker. “Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories.” In Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, edited by Andreas Holzinger, 10410:59–68. Lecture Notes in Computer Science . Cham: Springer, 2017. https://doi.org/10.1007/978-3-319-66808-6_5.","apa":"Fellmann, M., Robert, S., Büttner, S., Mucha, H., & Röcker, C. (2017). Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories. In A. Holzinger (Ed.), Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings (Vol. 10410, pp. 59–68). Cham: Springer. https://doi.org/10.1007/978-3-319-66808-6_5","ufg":"Fellmann, Michael et. al. (2017): Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories, in: Andreas Holzinger (Hg.): Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings (=Lecture Notes in Computer Science 10410), Cham, S. 59–68.","havard":"M. Fellmann, S. Robert, S. Büttner, H. Mucha, C. Röcker, Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories, in: A. Holzinger (Ed.), Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, Springer, Cham, 2017: pp. 59–68.","mla":"Fellmann, Michael, et al. “Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories.” Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, edited by Andreas Holzinger, vol. 10410, Springer, 2017, pp. 59–68, doi:10.1007/978-3-319-66808-6_5.","bjps":"Fellmann M et al. (2017) Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories. In Holzinger A (ed.), Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, vol. 10410. Cham: Springer, pp. 59–68.","van":"Fellmann M, Robert S, Büttner S, Mucha H, Röcker C. Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories. In: Holzinger A, editor. Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 84, 89, 129 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings. Cham: Springer; 2017. p. 59–68. (Lecture Notes in Computer Science ; vol. 10410).","din1505-2-1":"Fellmann, Michael ; Robert, Sebastian ; Büttner, Sebastian ; Mucha, Henrik ; Röcker, Carsten: Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories. In: Holzinger, A. (Hrsg.): Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, Lecture Notes in Computer Science . Bd. 10410. Cham : Springer, 2017, S. 59–68","chicago-de":"Fellmann, Michael, Sebastian Robert, Sebastian Büttner, Henrik Mucha und Carsten Röcker. 2017. Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories. In: Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, hg. von Andreas Holzinger, 10410:59–68. Lecture Notes in Computer Science . Cham: Springer. doi:10.1007/978-3-319-66808-6_5, .","short":"M. Fellmann, S. Robert, S. Büttner, H. Mucha, C. Röcker, in: A. Holzinger (Ed.), Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, Springer, Cham, 2017, pp. 59–68."},"volume":10410,"author":[{"full_name":"Fellmann, Michael","first_name":"Michael","last_name":"Fellmann"},{"first_name":"Sebastian","full_name":"Robert, Sebastian","last_name":"Robert"},{"first_name":"Sebastian","last_name":"Büttner","id":"61868","full_name":"Büttner, Sebastian"},{"first_name":"Henrik","last_name":"Mucha","full_name":"Mucha, Henrik","id":"64896"},{"full_name":"Röcker, Carsten","id":"61525","last_name":"Röcker","first_name":"Carsten"}],"year":2017,"main_file_link":[{"open_access":"1"}],"page":"59-68","status":"public"},{"publication_status":"published","series_title":"Technologien für die intelligente Automation ","publisher":"Springer Vieweg","conference":{"location":"Lemgo","name":"7. Jahreskolloquiums \"Kommunikation in der Automation\" (KommA 2016) / 5. Jahreskolloquiums \"Bildverarbeitung in der Automation\" (BVAu 2016)","start_date":"2016-11-30","end_date":"2026-12-01"},"department":[{"_id":"DEP5023"}],"abstract":[{"text":"In diesem Tagungsband sind die besten Beiträge des 7. Jahreskolloquiums \"Kommunikation in der Automation\" (KommA 2016) und des 5. Jahreskolloquiums \"Bildverarbeitung in der Automation\" (BVAu 2016) enthalten. Die Kolloquien fanden am 30. November und 1. Dezember 2016 anlässlich des 10jährigen Jubiläums des inIT - Institut für industrielle Informationstechnik in der SmartFactoryOWL, einer herstellerunabhängigen und offenen Industrie 4.0 Forschungs- und Demonstrationsplattform und zugleich Testfeld für den Mittelstand, in Lemgo statt.\r\nDie vorgestellten neuesten Forschungsergebnisse auf den Gebieten der industriellen Kommunikationstechnik und Bildverarbeitung erweitern den aktuellen Stand der Forschung und Technik. Die in den Beiträgen enthaltenen anschauliche Anwendungsbeispiele aus dem Bereich der Automation setzen die Ergebnisse in den direkten Anwendungsbezug.","lang":"ger"}],"user_id":"83781","intvolume":" 7","type":"book_editor","place":"Berlin","doi":"10.1007/978-3-662-55232-2","_id":"4506","volume":7,"citation":{"van":"Jasperneite J, Lohweg V, editors. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik. Berlin: Springer Vieweg; 2017. 295 p. (Technologien für die intelligente Automation ; vol. 7).","ama":"Jasperneite J, Lohweg V, eds. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik. Vol 7. Springer Vieweg; 2017. doi:10.1007/978-3-662-55232-2","ufg":"Jasperneite, Jürgen/Lohweg, Volker: Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik, Bd. 7, Berlin 2017 (Technologien für die intelligente Automation ).","havard":"J. Jasperneite, V. Lohweg, eds., Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik, Springer Vieweg, Berlin, 2017.","bjps":"Jasperneite J and Lohweg V (eds) (2017) Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik. Berlin: Springer Vieweg.","mla":"Jasperneite, Jürgen, and Volker Lohweg, editors. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik. Springer Vieweg, 2017, https://doi.org/10.1007/978-3-662-55232-2.","apa":"Jasperneite, J., & Lohweg, V. (Eds.). (2017). Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik (Vol. 7). Springer Vieweg. https://doi.org/10.1007/978-3-662-55232-2","ieee":"J. Jasperneite and V. Lohweg, Eds., Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik, vol. 7. Berlin: Springer Vieweg, 2017. doi: 10.1007/978-3-662-55232-2.","chicago":"Jasperneite, Jürgen, and Volker Lohweg, eds. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik. Vol. 7. Technologien für die intelligente Automation . Berlin: Springer Vieweg, 2017. https://doi.org/10.1007/978-3-662-55232-2.","short":"J. Jasperneite, V. Lohweg, eds., Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik, Springer Vieweg, Berlin, 2017.","din1505-2-1":"Jasperneite, J. ; Lohweg, V. (Hrsg.): Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik, Technologien für die intelligente Automation . Bd. 7. Berlin : Springer Vieweg, 2017","chicago-de":"Jasperneite, Jürgen und Volker Lohweg, Hrsg. 2017. Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik. Bd. 7. Technologien für die intelligente Automation . Berlin: Springer Vieweg. doi:10.1007/978-3-662-55232-2, ."},"title":" Kommunikation und Bildverarbeitung in der Automation : Ausgewählte Beiträge der Jahreskolloquien KommA und BVAu 2016 zum 10jährigen Jubiläum des inIT - Institut für industrielle Informationstechnik","page":"295","status":"public","year":"2017","date_updated":"2025-05-12T08:19:51Z","editor":[{"last_name":"Jasperneite","first_name":"Jürgen","id":"1899","full_name":"Jasperneite, Jürgen"},{"orcid":"0000-0002-3325-7887","first_name":"Volker","last_name":"Lohweg","full_name":"Lohweg, Volker","id":"1804"}],"date_created":"2021-01-22T08:40:04Z","publication_identifier":{"eisbn":["978-3-662-55232-2 "],"isbn":["978-3-662-55231-5"]},"language":[{"iso":"ger"}],"keyword":["Industrielle Kommunikationstechnik","Industrielle Bildverarbeitung","network reliability and redundancy methods","Networked Controls Systems","wireless real-time communication","quality control","reliability","safety and risk"]},{"date_updated":"2023-03-15T13:49:46Z","related_material":{"link":[{"relation":"contains","url":"https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8001049"}]},"corporate_editor":["Institute of Electrical and Electronics Engineers (IEEE)"],"publication":"2017 IEEE Second International Conference on DC Microgrids (ICDCM)","date_created":"2018-12-10T15:11:18Z","keyword":["AC-DC power convertors","electromagnetic compatibility","energy conservation","energy management systems","rectifiers","main power supply","industrial production","DC network","AC-DC conversion","rectifier topologies","EMC properties","intelligent energy management","energy efficiency improvement","downtime reduction","Rectifiers","Switches","Voltage control","Topology","Network topology","Production","Grounding","industrial DC grid","SMART Grid"],"language":[{"iso":"eng"}],"citation":{"apa":"Borcherding, H., Austermann, J., Kuhlmann, T., Weis, B., & Leonide, A. (2017). Concepts for a DC Network in Industrial Production. In Institute of Electrical and Electronics Engineers (IEEE) (Ed.), 2017 IEEE Second International Conference on DC Microgrids (ICDCM) (pp. 227–234). Danvers. https://doi.org/10.1109/ICDCM.2017.8001049","chicago":"Borcherding, Holger, Johann Austermann, Timm Kuhlmann, Benno Weis, and Andre Leonide. “Concepts for a DC Network in Industrial Production.” In 2017 IEEE Second International Conference on DC Microgrids (ICDCM), edited by Institute of Electrical and Electronics Engineers (IEEE), 227–34. Danvers, 2017. https://doi.org/10.1109/ICDCM.2017.8001049.","van":"Borcherding H, Austermann J, Kuhlmann T, Weis B, Leonide A. Concepts for a DC Network in Industrial Production. In: Institute of Electrical and Electronics Engineers (IEEE), editor. 2017 IEEE Second International Conference on DC Microgrids (ICDCM). Danvers; 2017. p. 227–34.","ufg":"Borcherding, Holger et. al. (2017): Concepts for a DC Network in Industrial Production, in: Institute of Electrical and Electronics Engineers (IEEE) (Hg.): 2017 IEEE Second International Conference on DC Microgrids (ICDCM), Danvers, S. 227–234.","bjps":"Borcherding H et al. (2017) Concepts for a DC Network in Industrial Production. In Institute of Electrical and Electronics Engineers (IEEE) (ed.), 2017 IEEE Second International Conference on DC Microgrids (ICDCM). Danvers, pp. 227–234.","havard":"H. Borcherding, J. Austermann, T. Kuhlmann, B. Weis, A. Leonide, Concepts for a DC Network in Industrial Production, in: Institute of Electrical and Electronics Engineers (IEEE) (Ed.), 2017 IEEE Second International Conference on DC Microgrids (ICDCM), Danvers, 2017: pp. 227–234.","mla":"Borcherding, Holger, et al. “Concepts for a DC Network in Industrial Production.” 2017 IEEE Second International Conference on DC Microgrids (ICDCM), edited by Institute of Electrical and Electronics Engineers (IEEE), no. 1, 2017, pp. 227–34, doi:10.1109/ICDCM.2017.8001049.","short":"H. Borcherding, J. Austermann, T. Kuhlmann, B. Weis, A. Leonide, in: Institute of Electrical and Electronics Engineers (IEEE) (Ed.), 2017 IEEE Second International Conference on DC Microgrids (ICDCM), Danvers, 2017, pp. 227–234.","din1505-2-1":"Borcherding, Holger ; Austermann, Johann ; Kuhlmann, Timm ; Weis, Benno ; Leonide, Andre: Concepts for a DC Network in Industrial Production. In: Institute of Electrical and Electronics Engineers (IEEE) (Hrsg.): 2017 IEEE Second International Conference on DC Microgrids (ICDCM). Danvers, 2017, S. 227–234","chicago-de":"Borcherding, Holger, Johann Austermann, Timm Kuhlmann, Benno Weis und Andre Leonide. 2017. Concepts for a DC Network in Industrial Production. In: 2017 IEEE Second International Conference on DC Microgrids (ICDCM), hg. von Institute of Electrical and Electronics Engineers (IEEE), 227–234. Danvers. doi:10.1109/ICDCM.2017.8001049, .","ieee":"H. Borcherding, J. Austermann, T. Kuhlmann, B. Weis, and A. Leonide, “Concepts for a DC Network in Industrial Production,” in 2017 IEEE Second International Conference on DC Microgrids (ICDCM), Nürnberg, 2017, no. 1, pp. 227–234.","ama":"Borcherding H, Austermann J, Kuhlmann T, Weis B, Leonide A. Concepts for a DC Network in Industrial Production. In: Institute of Electrical and Electronics Engineers (IEEE), ed. 2017 IEEE Second International Conference on DC Microgrids (ICDCM). Danvers; 2017:227-234. doi:10.1109/ICDCM.2017.8001049"},"title":"Concepts for a DC Network in Industrial Production","status":"public","page":"227-234","author":[{"first_name":"Holger","full_name":"Borcherding, Holger","last_name":"Borcherding","id":"1693"},{"last_name":"Austermann","first_name":"Johann","id":"42114","full_name":"Austermann, Johann"},{"full_name":"Kuhlmann, Timm","last_name":"Kuhlmann","first_name":"Timm"},{"first_name":"Benno","last_name":"Weis","full_name":"Weis, Benno"},{"full_name":"Leonide, Andre","first_name":"Andre","last_name":"Leonide"}],"main_file_link":[{"url":"https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8001049"}],"year":2017,"user_id":"45673","type":"conference","place":"Danvers","_id":"328","doi":"10.1109/ICDCM.2017.8001049","conference":{"end_date":"2017-06-29","start_date":"2017-06-27","location":"Nürnberg","name":"IEEE Second International Conference on DC Microgrids (ICDCM) "},"department":[{"_id":"DEP5018"}],"abstract":[{"text":"In this paper, concepts for an extended DC network for the main power supply of components from various manufacturers in industrial production are presented. In the first part, detailed requirements for such a network are given from the viewpoint of a customer. Based on those, different concepts for AC/DC conversion and energy management are discussed. As far as AC/DC conversion is concerned, the advantages and drawbacks of several rectifier topologies are listed, as they have a significant impact on the system behavior and EMC properties. \r\nAn intelligent energy management can improve the energy efficiency and reduce downtimes of a plant, which are major requirements from a customer’s viewpoint. ","lang":"eng"}],"issue":"1"},{"place":"Lemgo","_id":"573","user_id":"51864","type":"conference","quality_controlled":"1","department":[{"_id":"DEP1306"},{"_id":"DEP5020"},{"_id":"DEP5000"},{"_id":"DEP6020"}],"conference":{"name":"Proceedings7th International Conference","location":"Pordenone, Italy","end_date":"2017-09-29","start_date":"2017-09-28"},"issue":"1","abstract":[{"lang":"eng","text":"Additive manufacturing (AM) technologies have not only revolutionized product development and design by enabling rapid prototyping. They also gained influence on production in general, mainly because of their direct manufacturing capabilities. In the context of Industry 4.0 and the related process automation, innovative and advanced production technologies with completely new approaches are required [1]. AM technologies contribute to this with their advantages like freedom of design, cost efficient product individualization, and functional integration. On the other hand, AM still shows shortcomings in exploiting its full potential. Most current AM technologies are only applicable for manufacturing with singular materials. In particular, opportunities for processing of optically or electrically conductive materials are still missing. This paper contributes to the advancement of additive manufacturing of two different material variants or even two completely different materials. A special focus is laid on producing a part that combines mechanical with optical or electrical functionalities in one process step. The ultimate goal is to integrate sensor functionalities into an AM object, e.g. strain gauges. Extrusion processes, predominantly Fused Layer Modeling (FLM), are preferred in this research due to their mechanically simple machine setup in which additional functional materials can be adapted easily to the build process. In a first step, the general manufacturability has been evaluated. Thereafter, the resulting optical transmission properties have been analyzed. Especially the attenuation has to remain below a threshold value to accomplish a minimum signal-to-noise ratio."}],"publication_status":"published","series_title":"Publication series in direct digital manufacturing ","language":[{"iso":"eng"}],"keyword":["Additive manufacturing","Embedded optical waveguides","Electrical conductors","Embedded systems","FLM technology","Sensors"],"oa":"1","date_updated":"2024-04-19T12:58:56Z","related_material":{"link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf","relation":"contains"}]},"editor":[{"first_name":"Elio","full_name":"Padoano, Elio","last_name":"Padoano"},{"full_name":"Villmer, Franz-Josef","id":"14290","first_name":"Franz-Josef","last_name":"Villmer"}],"corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"date_created":"2019-02-18T11:16:07Z","publication_identifier":{"isbn":["978-3-946856-01-6"]},"publication":"Production Engineering and Management","page":"127-136","status":"public","year":"2017","author":[{"full_name":"Ehlert, Patrick","last_name":"Ehlert","first_name":"Patrick","id":"62091"},{"orcid":"https://orcid.org/0000-0001-7293-6893","first_name":"Oliver","last_name":"Stübbe","id":"51864","full_name":"Stübbe, Oliver"},{"full_name":"Villmer, Franz-Josef","id":"14290","first_name":"Franz-Josef","last_name":"Villmer"}],"main_file_link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf","open_access":"1"}],"citation":{"short":"P. Ehlert, O. Stübbe, F.-J. Villmer, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management, Lemgo, 2017, pp. 127–136.","chicago-de":"Ehlert, Patrick, Oliver Stübbe und Franz-Josef Villmer. 2017. Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, Department of Production Engineering and Management, und Hochschule Ostwestfalen-Lippe, 127–136. Publication series in direct digital manufacturing . Lemgo.","din1505-2-1":"Ehlert, Patrick ; Stübbe, Oliver ; Villmer, Franz-Josef: Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management ; Hochschule Ostwestfalen-Lippe (Hrsg.): Production Engineering and Management, Publication series in direct digital manufacturing . Lemgo, 2017, S. 127–136","apa":"Ehlert, P., Stübbe, O., & Villmer, F.-J. (2017). Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology. In E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management (Issue 1, pp. 127–136).","ieee":"P. Ehlert, O. Stübbe, and F.-J. Villmer, “Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology,” in Production Engineering and Management, Pordenone, Italy, 2017, no. 1, pp. 127–136.","chicago":"Ehlert, Patrick, Oliver Stübbe, and Franz-Josef Villmer. “Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, Department of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, 127–36. Publication Series in Direct Digital Manufacturing . Lemgo, 2017.","van":"Ehlert P, Stübbe O, Villmer FJ. Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology. In: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, editors. Production Engineering and Management. Lemgo; 2017. p. 127–36. (Publication series in direct digital manufacturing ).","ama":"Ehlert P, Stübbe O, Villmer FJ. Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology. In: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management. Publication series in direct digital manufacturing . ; 2017:127-136.","ufg":"Ehlert, Patrick/Stübbe, Oliver/Villmer, Franz-Josef: Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology, in: Padoano, Elio u. a. (Hgg.): Production Engineering and Management, Lemgo 2017 (Publication series in direct digital manufacturing ), S. 127–136.","havard":"P. Ehlert, O. Stübbe, F.-J. Villmer, Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management, Lemgo, 2017: pp. 127–136.","bjps":"Ehlert P, Stübbe O and Villmer F-J (2017) Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology. In Padoano E et al. (eds), Production Engineering and Management. Lemgo, pp. 127–136.","mla":"Ehlert, Patrick, et al. “Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2017, pp. 127–36."},"extern":"1","title":"Investigation on the Direct Manufacturing of Waveguides and Sensors Using FLM Technology"},{"abstract":[{"text":"The increasing industrial digitization is the driver for the fast emergence of many industrial smart products. To stay competitive, the manufacturing companies of these smart products need to optimize their internal lifecycleprocesses. Mainly, they have to converge the software and hardware lifecycleprocesses. However, even if this strategic necessity has been recognized, manufacturing companies struggle to develop and implement a roadmap of such convergence.Starting point for the realization of harmonized lifecycle processes are processmodels describing process activities and the underlying data models. This research addresses the latter one and aims to create a generic lifecycle data model. The research team created and evaluated such data model referring to development artifacts such as requirements, parts or test cases and to lifecycle artifacts such as revisions, versions and baselines. The generic lifecycle management model was evaluated by a practical development of a smart product. By this, the research provides a valuable result to maintain and increase the competitiveness of manufacturing companies.","lang":"eng"}],"issue":"1","conference":{"start_date":"2017-09-28","end_date":"2017-09-29","location":"Pordenone, Italy","name":"Proceedings 7th International Conference"},"department":[{"_id":"DEP1306"},{"_id":"DEP7022"}],"publication_status":"published","_id":"574","place":"Lemgo","type":"conference","user_id":"62088","year":2017,"main_file_link":[{"open_access":"1","url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf"}],"author":[{"id":"62088","first_name":"Andreas","full_name":"Deuter, Andreas","last_name":"Deuter"},{"full_name":"Otte, Andreas","last_name":"Otte","first_name":"Andreas","id":"51466"},{"id":"52288","last_name":"Ebert","full_name":"Ebert, Marcel","first_name":"Marcel"}],"page":"115-125","status":"public","title":"Extending the Sliced V-Model to Smart Product Development","citation":{"apa":"Deuter, A., Otte, A., & Ebert, M. (2017). Extending the Sliced V-Model to Smart Product Development. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 115–125). Lemgo.","chicago":"Deuter, Andreas, Andreas Otte, and Marcel Ebert. “Extending the Sliced V-Model to Smart Product Development.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 115–25. Lemgo, 2017.","van":"Deuter A, Otte A, Ebert M. Extending the Sliced V-Model to Smart Product Development. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2017. p. 115–25.","ufg":"Deuter, Andreas et. al. (2017): Extending the Sliced V-Model to Smart Product Development, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 115–125.","bjps":"Deuter A, Otte A and Ebert M (2017) Extending the Sliced V-Model to Smart Product Development. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 115–125.","havard":"A. Deuter, A. Otte, M. Ebert, Extending the Sliced V-Model to Smart Product Development, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017: pp. 115–125.","mla":"Deuter, Andreas, et al. “Extending the Sliced V-Model to Smart Product Development.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2017, pp. 115–25.","short":"A. Deuter, A. Otte, M. Ebert, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017, pp. 115–125.","din1505-2-1":"Deuter, Andreas ; Otte, Andreas ; Ebert, Marcel: Extending the Sliced V-Model to Smart Product Development. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2017, S. 115–125","chicago-de":"Deuter, Andreas, Andreas Otte und Marcel Ebert. 2017. Extending the Sliced V-Model to Smart Product Development. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 115–125. Lemgo.","ieee":"A. Deuter, A. Otte, and M. Ebert, “Extending the Sliced V-Model to Smart Product Development,” in Production Engineering and Management, Pordenone, Italy, 2017, no. 1, pp. 115–125.","ama":"Deuter A, Otte A, Ebert M. Extending the Sliced V-Model to Smart Product Development. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2017:115-125."},"oa":"1","language":[{"iso":"eng"}],"keyword":["PLM","ALM","Systems Engineering","VDI guideline 2206"],"date_created":"2019-02-18T11:34:36Z","publication":"Production Engineering and Management","publication_identifier":{"isbn":["978-3-946856-01-6"]},"editor":[{"full_name":"Padoano, Elio","last_name":"Padoano","first_name":"Elio"},{"first_name":"Franz-Josef","full_name":"Villmer, Franz-Josef","last_name":"Villmer"}],"corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"date_updated":"2023-03-15T13:50:01Z","related_material":{"link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf","relation":"contains"}]}},{"user_id":"49010","type":"conference","place":"Lemgo","_id":"578","publication_status":"published","quality_controlled":"1","conference":{"end_date":"2017-09-29","start_date":"2017-09-28","name":"Proceedings 7th International Conference","location":"Pordenone, Italy"},"department":[{"_id":"DEP1306"},{"_id":"DEP7020"},{"_id":"DEP1305"}],"abstract":[{"text":"Challenges of companies are presented by an increasing number of product variants or a growing product complexity in combination with a reduction of lot size. Therefore the scope of the work in the field of manual assembly will be more complex. This situation leads to a need of assistance systems. With these systems, the assembly workers will be qualified to execute their work tasks within the requirements. This approach set up on a further implementation of an assistance system at a great device manufacturer. The main focus of this implementation was the technical and functional design of the assistance system, but a successful implementation requires also an active handling of the change process. The purpose of this paper is the presentation of design principles in form of a process model for the implementation of digital assistance systems. The development of the design principles takes place in a participative approach. Executives, work councilsand workers develop the project results together with external project members. Project managers will be able to manage implementation processes with the results and take all the success factors into account.","lang":"eng"}],"issue":"1","date_updated":"2023-03-15T13:50:01Z","editor":[{"full_name":"Padoano, Elio","first_name":"Elio","last_name":"Padoano"},{"first_name":"Franz-Josef","full_name":"Villmer, Franz-Josef","last_name":"Villmer"}],"corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"date_created":"2019-02-18T11:34:36Z","publication_identifier":{"isbn":["978-3-946856-01-6"]},"publication":"Production Engineering and Management","language":[{"iso":"eng"}],"keyword":["Assistance systems","Change management","Success factors","Process model"],"oa":"1","citation":{"ieee":"T. Kleineberg, M. Eichelberg, and S. Hinrichsen, “Participative Development of an Implementation Process for Worker Assistance Systems,” in Production Engineering and Management, Pordenone, Italy, 2017, no. 1, pp. 25–36.","ama":"Kleineberg T, Eichelberg M, Hinrichsen S. Participative Development of an Implementation Process for Worker Assistance Systems. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2017:25-36.","apa":"Kleineberg, T., Eichelberg, M., & Hinrichsen, S. (2017). Participative Development of an Implementation Process for Worker Assistance Systems. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 25–36). Lemgo.","chicago":"Kleineberg, Tim, Matthias Eichelberg, and Sven Hinrichsen. “Participative Development of an Implementation Process for Worker Assistance Systems.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 25–36. Lemgo, 2017.","van":"Kleineberg T, Eichelberg M, Hinrichsen S. Participative Development of an Implementation Process for Worker Assistance Systems. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2017. p. 25–36.","ufg":"Kleineberg, Tim et. al. (2017): Participative Development of an Implementation Process for Worker Assistance Systems, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 25–36.","bjps":"Kleineberg T, Eichelberg M and Hinrichsen S (2017) Participative Development of an Implementation Process for Worker Assistance Systems. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 25–36.","havard":"T. Kleineberg, M. Eichelberg, S. Hinrichsen, Participative Development of an Implementation Process for Worker Assistance Systems, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017: pp. 25–36.","mla":"Kleineberg, Tim, et al. “Participative Development of an Implementation Process for Worker Assistance Systems.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2017, pp. 25–36.","short":"T. Kleineberg, M. Eichelberg, S. Hinrichsen, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017, pp. 25–36.","din1505-2-1":"Kleineberg, Tim ; Eichelberg, Matthias ; Hinrichsen, Sven: Participative Development of an Implementation Process for Worker Assistance Systems. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2017, S. 25–36","chicago-de":"Kleineberg, Tim, Matthias Eichelberg und Sven Hinrichsen. 2017. Participative Development of an Implementation Process for Worker Assistance Systems. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 25–36. Lemgo."},"title":"Participative Development of an Implementation Process for Worker Assistance Systems","page":"25-36","status":"public","author":[{"first_name":"Tim","full_name":"Kleineberg, Tim","last_name":"Kleineberg","id":"65024"},{"first_name":"Matthias","id":"60217","full_name":"Eichelberg, Matthias","last_name":"Eichelberg"},{"id":"49010","last_name":"Hinrichsen","full_name":"Hinrichsen, Sven","first_name":"Sven"}],"main_file_link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf","open_access":"1"}],"year":2017},{"publisher":"TU","department":[{"_id":"DEP5023"}],"conference":{"start_date":"201610-18","end_date":"2016-10-19","name":"Human-Computer Interaction – Perspectives on Industry 4.0. Workshop","location":"Graz, Austria"},"abstract":[{"text":"With the advances of technology, intelligent assistive systems that adapt to individual humans will become feasible. However, application areas of such systems are rarely discussed within the Industry 4.0 community. Most assistive systems that have been presented have been developed for specific task, such as assembly support or warehouse picking, but there might be a huge uncovered design space to be explored. With this work, we want to step back from existing systems and analyze the design opportunities of assistive systems especially for small and medium-size enterprises (SME). To achieve this goal we conducted a study in four SME, consisting of observations and interviews. Here we present our findings about the potential future application areas of human-centered assistive systems.","lang":"eng"}],"publication_status":"published","place":"Graz, Österreich","_id":"4299","user_id":"15514","type":"conference","status":"public","main_file_link":[{"open_access":"1"}],"author":[{"first_name":"Henrik","last_name":"Mucha","id":"64896","full_name":"Mucha, Henrik"},{"last_name":"Büttner","id":"61868","full_name":"Büttner, Sebastian","first_name":"Sebastian"},{"id":"61525","last_name":"Röcker","first_name":"Carsten","full_name":"Röcker, Carsten"}],"year":2016,"citation":{"short":"H. Mucha, S. Büttner, C. Röcker, in: Fraunhofer IGD (Ed.), Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 , TU, Graz, Österreich, 2016.","din1505-2-1":"Mucha, Henrik ; Büttner, Sebastian ; Röcker, Carsten: Application Areas for Human-Centered Assistive Systems. In: Fraunhofer IGD (Hrsg.): Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 . Graz, Österreich : TU, 2016","chicago-de":"Mucha, Henrik, Sebastian Büttner und Carsten Röcker. 2016. Application Areas for Human-Centered Assistive Systems. In: Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 , hg. von Fraunhofer IGD . Graz, Österreich: TU.","apa":"Mucha, H., Büttner, S., & Röcker, C. (2016). Application Areas for Human-Centered Assistive Systems. In Fraunhofer IGD (Ed.), Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 . Graz, Österreich: TU.","chicago":"Mucha, Henrik, Sebastian Büttner, and Carsten Röcker. “Application Areas for Human-Centered Assistive Systems.” In Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 , edited by Fraunhofer IGD . Graz, Österreich: TU, 2016.","van":"Mucha H, Büttner S, Röcker C. Application Areas for Human-Centered Assistive Systems. In: Fraunhofer IGD , editor. Human-Computer Interaction – Perspectives on Industry 40 Workshop at i-KNOW 2016 . Graz, Österreich: TU; 2016.","ufg":"Mucha, Henrik et. al. (2016): Application Areas for Human-Centered Assistive Systems, in: Fraunhofer IGD (Hg.): Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 , Graz, Österreich.","mla":"Mucha, Henrik, et al. “Application Areas for Human-Centered Assistive Systems.” Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 , edited by Fraunhofer IGD , TU, 2016.","havard":"H. Mucha, S. Büttner, C. Röcker, Application Areas for Human-Centered Assistive Systems, in: Fraunhofer IGD (Ed.), Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 , TU, Graz, Österreich, 2016.","bjps":"Mucha H, Büttner S and Röcker C (2016) Application Areas for Human-Centered Assistive Systems. In Fraunhofer IGD (ed.), Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 . Graz, Österreich: TU.","ieee":"H. Mucha, S. Büttner, and C. Röcker, “Application Areas for Human-Centered Assistive Systems,” in Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 , Graz, Austria, 2016.","ama":"Mucha H, Büttner S, Röcker C. Application Areas for Human-Centered Assistive Systems. In: Fraunhofer IGD , ed. Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 . Graz, Österreich: TU; 2016."},"title":"Application Areas for Human-Centered Assistive Systems","language":[{"iso":"eng"}],"keyword":["Industry 4.0","Assistive Systems","Small and Medium-Sized Enterprises","SME","Human-Centered Design","Human-Computer Interaction for Industry"],"oa":"1","related_material":{"link":[{"url":"https://www.th-owl.de/init/uploads/tx_initdb/HCII40_2016_paper_3__7___002_.pdf","relation":"original"}]},"date_updated":"2023-03-15T13:49:51Z","corporate_editor":["Fraunhofer IGD "],"date_created":"2020-12-22T14:11:02Z","publication":"Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 "},{"publication_status":"published","series_title":"Aesthetic intelligence Aesthetics Design methodologies Ambient intelligent systems (AISC)","publisher":"Springer","abstract":[{"text":"This paper discusses the relevance of beauty and aesthetic values for an aesthetically pleasing design of technology-enhanced spaces in the context of ergonomics, usability, and technology acceptance. Under the concept of Aesthetic Intelligence we subsume various aspects, including conceptual scoping, formal design skills and creative methodologies. Our goal is to provide a concept for the exchange of ideas, initiation of collaborations and the development of methodological practices for facilitating effective and pleasurable designs.","lang":"eng"}],"conference":{"location":"Walt Disney World®, Florida, USA","name":"AHFE 2016 International Conference on Affective and Pleasurable Design","end_date":"2016-07-31","start_date":"2016-07-27"},"department":[{"_id":"DEP5023"}],"intvolume":" 483","user_id":"15514","type":"conference","doi":"10.1007/978-3-319-41661-8_37","_id":"4328","place":"Cham","volume":483,"citation":{"short":"D.A. Plewe, C. Röcker, in: W. Chung, C.S. Shin (Eds.), Advances in Affective and Pleasurable Design, Springer, Cham, 2016, pp. 385–390.","chicago-de":"Plewe, Daniela Alina und Carsten Röcker. 2016. Aesthetic Intelligence for Effective and Pleasurable Design. In: Advances in Affective and Pleasurable Design, hg. von WonJoon Chung und Cliff Sungsoo Shin, 483:385–390. Aesthetic intelligence Aesthetics Design methodologies Ambient intelligent systems (AISC). Cham: Springer. doi:10.1007/978-3-319-41661-8_37, .","din1505-2-1":"Plewe, Daniela Alina ; Röcker, Carsten: Aesthetic Intelligence for Effective and Pleasurable Design. In: Chung, W. ; Shin, C. S. (Hrsg.): Advances in Affective and Pleasurable Design, Aesthetic intelligence Aesthetics Design methodologies Ambient intelligent systems (AISC). Bd. 483. Cham : Springer, 2016, S. 385–390","apa":"Plewe, D. A., & Röcker, C. (2016). Aesthetic Intelligence for Effective and Pleasurable Design. In W. Chung & C. S. Shin (Eds.), Advances in Affective and Pleasurable Design (Vol. 483, pp. 385–390). Cham: Springer. https://doi.org/10.1007/978-3-319-41661-8_37","ieee":"D. A. Plewe and C. Röcker, “Aesthetic Intelligence for Effective and Pleasurable Design,” in Advances in Affective and Pleasurable Design, Walt Disney World®, Florida, USA, 2016, vol. 483, pp. 385–390.","chicago":"Plewe, Daniela Alina, and Carsten Röcker. “Aesthetic Intelligence for Effective and Pleasurable Design.” In Advances in Affective and Pleasurable Design, edited by WonJoon Chung and Cliff Sungsoo Shin, 483:385–90. Aesthetic Intelligence Aesthetics Design Methodologies Ambient Intelligent Systems (AISC). Cham: Springer, 2016. https://doi.org/10.1007/978-3-319-41661-8_37.","van":"Plewe DA, Röcker C. Aesthetic Intelligence for Effective and Pleasurable Design. In: Chung W, Shin CS, editors. Advances in Affective and Pleasurable Design. Cham: Springer; 2016. p. 385–90. (Aesthetic intelligence Aesthetics Design methodologies Ambient intelligent systems (AISC); vol. 483).","ama":"Plewe DA, Röcker C. Aesthetic Intelligence for Effective and Pleasurable Design. In: Chung W, Shin CS, eds. Advances in Affective and Pleasurable Design. Vol 483. Aesthetic intelligence Aesthetics Design methodologies Ambient intelligent systems (AISC). Cham: Springer; 2016:385-390. doi:10.1007/978-3-319-41661-8_37","ufg":"Plewe, Daniela Alina/Röcker, Carsten (2016): Aesthetic Intelligence for Effective and Pleasurable Design, in: WonJoon Chung/Cliff Sungsoo Shin (Hgg.): Advances in Affective and Pleasurable Design (=Aesthetic intelligence Aesthetics Design methodologies Ambient intelligent systems (AISC) 483), Cham, S. 385–390.","havard":"D.A. Plewe, C. Röcker, Aesthetic Intelligence for Effective and Pleasurable Design, in: W. Chung, C.S. Shin (Eds.), Advances in Affective and Pleasurable Design, Springer, Cham, 2016: pp. 385–390.","mla":"Plewe, Daniela Alina, and Carsten Röcker. “Aesthetic Intelligence for Effective and Pleasurable Design.” Advances in Affective and Pleasurable Design, edited by WonJoon Chung and Cliff Sungsoo Shin, vol. 483, Springer, 2016, pp. 385–90, doi:10.1007/978-3-319-41661-8_37.","bjps":"Plewe DA and Röcker C (2016) Aesthetic Intelligence for Effective and Pleasurable Design. In Chung W and Shin CS (eds), Advances in Affective and Pleasurable Design, vol. 483. Cham: Springer, pp. 385–390."},"title":"Aesthetic Intelligence for Effective and Pleasurable Design","page":"385-390","status":"public","year":2016,"main_file_link":[{"open_access":"1"}],"author":[{"first_name":"Daniela Alina","full_name":"Plewe, Daniela Alina","last_name":"Plewe"},{"id":"61525","first_name":"Carsten","last_name":"Röcker","full_name":"Röcker, Carsten"}],"editor":[{"full_name":"Chung, WonJoon","first_name":"WonJoon","last_name":"Chung"},{"last_name":"Shin","first_name":"Cliff Sungsoo ","full_name":"Shin, Cliff Sungsoo "}],"date_updated":"2023-03-15T13:49:52Z","date_created":"2021-01-08T11:32:17Z","publication":"Advances in Affective and Pleasurable Design","publication_identifier":{"isbn":["978-3-319-41660-1"],"eisbn":["978-3-319-41661-8"]},"language":[{"iso":"eng"}],"keyword":["Aesthetic intelligence","Aesthetics","Design methodologies","Ambient intelligent systems"],"oa":"1"},{"_id":"584","place":"Lemgo","has_accepted_license":"1","user_id":"49010","type":"conference","quality_controlled":"1","issue":"01","abstract":[{"lang":"eng","text":"Due to the continuing trend towards more complexity of products with an increasing number of variants and smaller lot sizes, the assembly often takes place -despite relatively high labor costs in Western industrialized nations -manually or partially automated. An outsourcing or relocation of assembly function abroad is not suitable in most cases.Therefore, it is increasingly important to reduce process variations and waste in manual assembly processes. Assistance systems have the potential, depending on the situation, to assist the worker in his work, to reduce error rate and to increase productivity. In a first part of the paper an overview will be given to different types of assembly assistance systems. Then a morphological chart is developed, which can provide assistance in selecting or comparing assembly assistance systems. With the help of this chart an assembly assistant system is presented. Finally a quick look is taken at further research being done in this area."}],"department":[{"_id":"DEP7020"},{"_id":"DEP1306"},{"_id":"DEP1305"}],"conference":{"end_date":"2016-09-30","start_date":"2016-09-29","name":"Proceedings 6th International Conference","location":"Lemgo"},"ddc":["620"],"publication_status":"published","file":[{"access_level":"open_access","success":1,"relation":"main_file","creator":"mqc-p4h","date_updated":"2023-04-14T11:26:54Z","file_id":"9700","file_size":462853,"content_type":"application/pdf","date_created":"2023-04-14T11:26:54Z","file_name":"PEM_2016_Hinrichsen Riediger Unrau.pdf"}],"language":[{"iso":"eng"}],"keyword":["Assistance systems","Manual assembly","Morphology"],"oa":"1","editor":[{"first_name":"Franz-Josef","full_name":"Villmer, Franz-Josef","last_name":"Villmer"},{"full_name":"Padoano, Elio","last_name":"Padoano","first_name":"Elio"}],"file_date_updated":"2023-04-14T11:26:54Z","corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"date_updated":"2023-04-14T11:27:48Z","date_created":"2019-02-18T14:30:50Z","publication":"Production Engineering and Management","publication_identifier":{"isbn":["978-3-946856-00-9"]},"page":"3-14","status":"public","year":"2016","author":[{"first_name":"Sven","id":"49010","last_name":"Hinrichsen","full_name":"Hinrichsen, Sven"},{"last_name":"Riediger","first_name":"Daniel","id":"52263","full_name":"Riediger, Daniel"},{"last_name":"Unrau","id":"64690","full_name":"Unrau, Alexander","first_name":"Alexander"}],"citation":{"ieee":"S. Hinrichsen, D. Riediger, and A. Unrau, “Assistance Systems in Manual Assembly,” in Production Engineering and Management, Lemgo, 2016, no. 01, pp. 3–14.","ama":"Hinrichsen S, Riediger D, Unrau A. Assistance Systems in Manual Assembly. In: Villmer FJ, Padoano E, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management. ; 2016:3-14.","din1505-2-1":"Hinrichsen, Sven ; Riediger, Daniel ; Unrau, Alexander: Assistance Systems in Manual Assembly. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management ; Hochschule Ostwestfalen-Lippe (Hrsg.): Production Engineering and Management. Lemgo, 2016, S. 3–14","chicago-de":"Hinrichsen, Sven, Daniel Riediger und Alexander Unrau. 2016. Assistance Systems in Manual Assembly. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, Department of Production Engineering and Management, und Hochschule Ostwestfalen-Lippe, 3–14. Lemgo.","short":"S. Hinrichsen, D. Riediger, A. Unrau, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management, Lemgo, 2016, pp. 3–14.","chicago":"Hinrichsen, Sven, Daniel Riediger, and Alexander Unrau. “Assistance Systems in Manual Assembly.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, Department of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, 3–14. Lemgo, 2016.","apa":"Hinrichsen, S., Riediger, D., & Unrau, A. (2016). Assistance Systems in Manual Assembly. In F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management (Issue 01, pp. 3–14).","ufg":"Hinrichsen, Sven/Riediger, Daniel/Unrau, Alexander: Assistance Systems in Manual Assembly, in: Villmer, Franz-Josef u. a. (Hgg.): Production Engineering and Management, Lemgo 2016, S. 3–14.","havard":"S. Hinrichsen, D. Riediger, A. Unrau, Assistance Systems in Manual Assembly, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management, Lemgo, 2016: pp. 3–14.","bjps":"Hinrichsen S, Riediger D and Unrau A (2016) Assistance Systems in Manual Assembly. In Villmer F-J et al. (eds), Production Engineering and Management. Lemgo, pp. 3–14.","mla":"Hinrichsen, Sven, et al. “Assistance Systems in Manual Assembly.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 01, 2016, pp. 3–14.","van":"Hinrichsen S, Riediger D, Unrau A. Assistance Systems in Manual Assembly. In: Villmer FJ, Padoano E, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, editors. Production Engineering and Management. Lemgo; 2016. p. 3–14."},"title":"Assistance Systems in Manual Assembly"},{"corporate_editor":["Facade Tectonics Institute "],"editor":[{"first_name":"Douglas ","last_name":"Noble","full_name":"Noble, Douglas "},{"full_name":"Kensek, Karen ","last_name":"Kensek","first_name":"Karen "},{"first_name":"Shreya ","last_name":"Das","full_name":"Das, Shreya "}],"date_updated":"2023-03-15T13:50:02Z","publication":"Facade Tectonics : World Congress Los Angeles 2016 Conference Proceedings","publication_identifier":{"isbn":["978-1-882352-43-2 "]},"date_created":"2021-05-07T10:46:56Z","keyword":["Curtain wall","energy efficiency","thermal break","condensation","physical testing","mockups"],"language":[{"iso":"eng"}],"oa":"1","volume":2,"citation":{"chicago":"Arztmann, Daniel. “Shadow Boxes – Re-Engineered.” In Facade Tectonics : World Congress Los Angeles 2016 Conference Proceedings, edited by Douglas Noble, Karen Kensek, Shreya Das, and Facade Tectonics Institute , Vol. 2. Los Angeles : Tectonic Press, 2016.","apa":"Arztmann, D. (2016). Shadow Boxes – Re-Engineered. In D. Noble, K. Kensek, S. Das, & Facade Tectonics Institute (Eds.), Facade Tectonics : World Congress Los Angeles 2016 Conference Proceedings (Vol. 2). Los Angeles : Tectonic Press.","ieee":"D. Arztmann, “Shadow Boxes – Re-Engineered,” in Facade Tectonics : World Congress Los Angeles 2016 Conference Proceedings, Los Angeles, 2016, vol. 2.","ufg":"Arztmann, Daniel (2016): Shadow Boxes – Re-Engineered, in: Douglas Noble et. al. (Hgg.): Facade Tectonics : World Congress Los Angeles 2016 Conference Proceedings (= 2), Los Angeles .","havard":"D. Arztmann, Shadow Boxes – Re-Engineered, in: D. Noble, K. Kensek, S. Das, Facade Tectonics Institute (Eds.), Facade Tectonics : World Congress Los Angeles 2016 Conference Proceedings, Tectonic Press, Los Angeles , 2016.","bjps":"Arztmann D (2016) Shadow Boxes – Re-Engineered. In Noble D et al. (eds), Facade Tectonics : World Congress Los Angeles 2016 Conference Proceedings, vol. 2. Los Angeles : Tectonic Press.","mla":"Arztmann, Daniel. “Shadow Boxes – Re-Engineered.” Facade Tectonics : World Congress Los Angeles 2016 Conference Proceedings, edited by Douglas Noble et al., vol. 2, Tectonic Press, 2016.","van":"Arztmann D. Shadow Boxes – Re-Engineered. In: Noble D, Kensek K, Das S, Facade Tectonics Institute , editors. Facade Tectonics : World Congress Los Angeles 2016 Conference Proceedings. Los Angeles : Tectonic Press; 2016.","ama":"Arztmann D. Shadow Boxes – Re-Engineered. In: Noble D, Kensek K, Das S, Facade Tectonics Institute , eds. Facade Tectonics : World Congress Los Angeles 2016 Conference Proceedings. Vol 2. Los Angeles : Tectonic Press; 2016.","chicago-de":"Arztmann, Daniel. 2016. Shadow Boxes – Re-Engineered. In: Facade Tectonics : World Congress Los Angeles 2016 Conference Proceedings, hg. von Douglas Noble, Karen Kensek, Shreya Das, und Facade Tectonics Institute , 2:. Los Angeles : Tectonic Press.","din1505-2-1":"Arztmann, Daniel: Shadow Boxes – Re-Engineered. In: Noble, D. ; Kensek, K. ; Das, S. ; Facade Tectonics Institute (Hrsg.): Facade Tectonics : World Congress Los Angeles 2016 Conference Proceedings. Bd. 2. Los Angeles : Tectonic Press, 2016","short":"D. Arztmann, in: D. Noble, K. Kensek, S. Das, Facade Tectonics Institute (Eds.), Facade Tectonics : World Congress Los Angeles 2016 Conference Proceedings, Tectonic Press, Los Angeles , 2016."},"title":"Shadow Boxes – Re-Engineered","status":"public","year":2016,"author":[{"last_name":"Arztmann","first_name":"Daniel","id":"58805","full_name":"Arztmann, Daniel"}],"main_file_link":[{"open_access":"1","url":"https://www.facadetectonics.org/index.php?p=actions/protectedlinks/link/get&code=61a806146cc381401fa140fd4efbec7f96313bab"}],"intvolume":" 2","user_id":"15514","type":"conference","_id":"5853","place":"Los Angeles ","publication_status":"published","publisher":"Tectonic Press","abstract":[{"lang":"eng","text":"This paper provides information about an in-house research project for shadow box design. During this research project, several mockups with sensors for heat and relative humidity were produced and tested under two different laboratory conditions: one with artificial sunlight and one in an outdoor temperate climate. \r\nThe outdoor test provided information about temperature changes in the shadow box due to air infiltration and exfiltration. Further, it also provided information about the conservation of solar energy in the air cavity behind the spandrel glass and adjacent materials. Temperature sensors on the interior surfaces of the façade produced data that was used to draw conclusions about the heat flow from inside the shadow box to the interior ambient air via the façade profiles. It was also used to develop a two-dimensional simulation tool to show heat development and heat flow in the shadow box. \r\nThe test under laboratory conditions with artificial sunlight showed that the correct choice of glass type and color of the opaque back layer highly influences heat development in the shadow box cavity. The test results also illustrate that the size of ventilation openings and the depth of the air layer only slightly influence heat built-up in this cavity. \r\nThe shadow box is a very complex system that should be designed and manufactured so as not to have a detrimental effect on the thermal performance of the facade. To maintain precise and consistent reproduction and to improve the thermal performance, a new PVC shadow box profile was developed. PVC is a poor thermal conductor and, therefore, the heat flow from the shadow box construction into the interior becomes interrupted, consequently improving the heat transfer coefficients of the façade and the panel construction. Furthermore, the PVC profile has been designed as a four sided mitered and sealed frame insert to enable easy attachment of the opaque back layer, thus creating a weather tight assembly within the curtain wall day light opening. "}],"department":[{"_id":"DEP1034"}],"conference":{"name":"Facade Tectonics : World Congress Los Angeles 2016 Conference Proceedings","location":"Los Angeles","end_date":"2016","start_date":"2016"}},{"title":"User Interfaces for Cyber-Physical Systems : Expanding the Designer’s Toolbox","citation":{"short":"V. Paelke, C. Röcker, N. Koch, H. Flatt, S. Büttner, At - Automatisierungstechnik 63 (2015) 833–843.","chicago-de":"Paelke, Volker , Carsten Röcker, Nils Koch, Holger Flatt und Sebastian Büttner. 2015. User Interfaces for Cyber-Physical Systems : Expanding the Designer’s Toolbox. at - Automatisierungstechnik 63, Nr. 10: 833–843. doi:10.1515/auto-2015-0016, .","din1505-2-1":"Paelke, Volker ; Röcker, Carsten ; Koch, Nils ; Flatt, Holger ; Büttner, Sebastian: User Interfaces for Cyber-Physical Systems : Expanding the Designer’s Toolbox. In: at - Automatisierungstechnik Bd. 63. Oldenbourg, De Gryter Oldenbourg (2015), Nr. 10, S. 833–843","apa":"Paelke, V., Röcker, C., Koch, N., Flatt, H., & Büttner, S. (2015). User Interfaces for Cyber-Physical Systems : Expanding the Designer’s Toolbox. At - Automatisierungstechnik, 63(10), 833–843. https://doi.org/10.1515/auto-2015-0016","chicago":"Paelke, Volker , Carsten Röcker, Nils Koch, Holger Flatt, and Sebastian Büttner. “User Interfaces for Cyber-Physical Systems : Expanding the Designer’s Toolbox.” At - Automatisierungstechnik 63, no. 10 (2015): 833–43. https://doi.org/10.1515/auto-2015-0016.","van":"Paelke V, Röcker C, Koch N, Flatt H, Büttner S. User Interfaces for Cyber-Physical Systems : Expanding the Designer’s Toolbox. at - Automatisierungstechnik. 2015;63(10):833–43.","ufg":"Paelke, Volker et. al. (2015): User Interfaces for Cyber-Physical Systems : Expanding the Designer’s Toolbox, in: at - Automatisierungstechnik 63 (10), S. 833–843.","mla":"Paelke, Volker, et al. “User Interfaces for Cyber-Physical Systems : Expanding the Designer’s Toolbox.” At - Automatisierungstechnik, vol. 63, no. 10, De Gryter Oldenbourg, 2015, pp. 833–43, doi:10.1515/auto-2015-0016.","bjps":"Paelke V et al. (2015) User Interfaces for Cyber-Physical Systems : Expanding the Designer’s Toolbox. at - Automatisierungstechnik 63, 833–843.","havard":"V. Paelke, C. Röcker, N. Koch, H. Flatt, S. Büttner, User Interfaces for Cyber-Physical Systems : Expanding the Designer’s Toolbox, At - Automatisierungstechnik. 63 (2015) 833–843.","ieee":"V. Paelke, C. Röcker, N. Koch, H. Flatt, and S. Büttner, “User Interfaces for Cyber-Physical Systems : Expanding the Designer’s Toolbox,” at - Automatisierungstechnik, vol. 63, no. 10, pp. 833–843, 2015.","ama":"Paelke V, Röcker C, Koch N, Flatt H, Büttner S. User Interfaces for Cyber-Physical Systems : Expanding the Designer’s Toolbox. at - Automatisierungstechnik. 2015;63(10):833-843. doi:10.1515/auto-2015-0016"},"volume":63,"year":2015,"main_file_link":[{"url":"https://www.degruyter.com/view/j/auto.2015.63.issue-10/auto-2015-0016/auto-2015-0016.xml"}],"author":[{"first_name":"Volker ","full_name":"Paelke, Volker ","last_name":"Paelke"},{"first_name":"Carsten","last_name":"Röcker","id":"61525","full_name":"Röcker, Carsten"},{"last_name":"Koch","full_name":"Koch, Nils","first_name":"Nils"},{"last_name":"Flatt","first_name":"Holger","id":"58494","full_name":"Flatt, Holger"},{"first_name":"Sebastian","full_name":"Büttner, Sebastian","id":"61868","last_name":"Büttner"}],"status":"public","page":"833-843","publication_identifier":{"issn":["2196-677X"]},"publication":"at - Automatisierungstechnik","date_created":"2019-03-07T14:53:12Z","date_updated":"2023-03-15T13:50:08Z","keyword":["User centred design","user interfaces","user expe-rience","cyber-physical systems","smart glasses","wearables"],"language":[{"iso":"eng"}],"publication_status":"published","department":[{"_id":"DEP1305"}],"abstract":[{"text":"In this paper, we analyze the specific requirements of interacting with cyber-physical systems and propose a design approach that is driven by user needs and makes use of an expanded toolbox that contains state-of-the-art interaction technologies including Smart Glasses and Wearables. We present several examples of assistance systems in industrial production that use these interaction technologies and discuss the corresponding usability and implementation aspects. ","lang":"eng"},{"lang":"ger","text":"Dieser Beitrag analysiert die speziellen Herausforderungen in der Interaktion mit Cyber-Physical Systems und stellen ein darauf abgestimmtes Entwurfsvorgehen vor. Der Ansatz kombiniert ein nutzerzentriertes Vorgehen mit einer Sammlung aktueller Interaktionstechnologien wie Smart Glasses und Wearables. An Einsatzbeispielen in der industriellen Produktion werden die mit diesen neuen Interaktionstechnologien verknüpften Implementierungs- und Usabilityaspekte diskutiert. "}],"issue":"10","publisher":"De Gryter Oldenbourg","type":"journal_article","user_id":"45673","intvolume":" 63","alternative_title":["Nutzerschnittstellen für Cyber-Physical Systems : Ein Werkzeugkasten für Designer und Entwickler"],"place":"Oldenbourg","_id":"688","doi":"10.1515/auto-2015-0016"},{"citation":{"short":"U. Mönks, H. Trsek, L. Dürkop, V. Geneiß, V. Lohweg, Mechatronics (2015) 63–71.","chicago-de":"Mönks, Uwe, Henning Trsek, Lars Dürkop, Volker Geneiß und Volker Lohweg. 2015. Towards distributed intelligent sensor and information fusion. Mechatronics, Nr. 34: 63–71. doi:10.1016/j.mechatronics.2015.05.005, .","din1505-2-1":"Mönks, Uwe ; Trsek, Henning ; Dürkop, Lars ; Geneiß, Volker ; Lohweg, Volker: Towards distributed intelligent sensor and information fusion. In: Mechatronics, Elsevier (2015), Nr. 34, S. 63–71","apa":"Mönks, U., Trsek, H., Dürkop, L., Geneiß, V., & Lohweg, V. (2015). Towards distributed intelligent sensor and information fusion. Mechatronics, (34), 63–71. https://doi.org/10.1016/j.mechatronics.2015.05.005","ieee":"U. Mönks, H. Trsek, L. Dürkop, V. Geneiß, and V. Lohweg, “Towards distributed intelligent sensor and information fusion,” Mechatronics, no. 34, pp. 63–71, 2015.","chicago":"Mönks, Uwe, Henning Trsek, Lars Dürkop, Volker Geneiß, and Volker Lohweg. “Towards Distributed Intelligent Sensor and Information Fusion.” Mechatronics, no. 34 (2015): 63–71. https://doi.org/10.1016/j.mechatronics.2015.05.005.","van":"Mönks U, Trsek H, Dürkop L, Geneiß V, Lohweg V. Towards distributed intelligent sensor and information fusion. Mechatronics. 2015;(34):63–71.","ama":"Mönks U, Trsek H, Dürkop L, Geneiß V, Lohweg V. Towards distributed intelligent sensor and information fusion. Mechatronics. 2015;(34):63-71. doi:10.1016/j.mechatronics.2015.05.005","ufg":"Mönks, Uwe et. al. (2015): Towards distributed intelligent sensor and information fusion, in: Mechatronics (34), S. 63–71.","mla":"Mönks, Uwe, et al. “Towards Distributed Intelligent Sensor and Information Fusion.” Mechatronics, no. 34, Elsevier, 2015, pp. 63–71, doi:10.1016/j.mechatronics.2015.05.005.","bjps":"Mönks U et al. (2015) Towards Distributed Intelligent Sensor and Information Fusion. Mechatronics 63–71.","havard":"U. Mönks, H. Trsek, L. Dürkop, V. Geneiß, V. Lohweg, Towards distributed intelligent sensor and information fusion, Mechatronics. (2015) 63–71."},"title":"Towards distributed intelligent sensor and information fusion","publisher":"Elsevier","page":"63-71","status":"public","abstract":[{"text":"Recent industrial applications are implemented in a modular way, resulting in flexibility during the whole life cycle, i.e., setup, operation, and maintenance. This applies especially to larger applications like logistic, production, and printing processes. Their modular character is resulting from the constantly increasing complexity of such installations, which makes their supervision for securing reliable operation a difficult task: the data of hundreds (if not thousands) of signal sources must be acquired, communicated, and evaluated for system diagnosis. In this contribution we summarize the challenges arising in such applications and show that distributed sensor and information fusion for modular self-diagnosis tackles these challenges. Here, we propose an innovative distributed architecture encompassing intelligent sensor nodes, self-configuring real-time communication networks, and a suitable sensor and information fusion system for condition monitoring. New challenges arise in the context of distributed information fusion systems, which are identified and to which an outlook on future solutions is provided. A number of these solutions have already been discovered, implemented, and are evaluated in the context of a demonstrator, which resembles a real-world printing application.","lang":"eng"}],"issue":"34","department":[{"_id":"DEP5023"}],"main_file_link":[{"url":"https://www.sciencedirect.com/science/article/pii/S0957415815000707","open_access":"1"}],"year":2015,"author":[{"full_name":"Mönks, Uwe","first_name":"Uwe","id":"1825","last_name":"Mönks"},{"last_name":"Trsek","id":"1486","full_name":"Trsek, Henning","first_name":"Henning"},{"first_name":"Lars","last_name":"Dürkop","full_name":"Dürkop, Lars"},{"first_name":"Volker","full_name":"Geneiß, Volker","last_name":"Geneiß"},{"orcid":"0000-0002-3325-7887","last_name":"Lohweg","full_name":"Lohweg, Volker","id":"1804","first_name":"Volker"}],"date_updated":"2023-03-15T13:49:39Z","user_id":"68554","date_created":"2019-12-04T09:29:07Z","type":"journal_article","publication_identifier":{"issn":["0957-4158"]},"publication":"Mechatronics","doi":"10.1016/j.mechatronics.2015.05.005","_id":"2140","language":[{"iso":"eng"}],"keyword":["Cyber-physical systems","Information fusion","Fusion system design","Intelligent sensors","Self-configuration","Intelligent networking"],"oa":"1"},{"oa":"1","keyword":["Cyber-Physical Systems","Machine Learning","Diagnosis","Anomaly Detection"],"place":"Austin, Texas, USA","language":[{"iso":"eng"}],"_id":"2167","publication":"Twenty-Ninth Conference on Artificial Intelligence (AAAI-15)","type":"conference","date_created":"2019-12-04T12:43:12Z","user_id":"68554","date_updated":"2023-03-15T13:49:39Z","author":[{"first_name":"Oliver","last_name":"Niggemann","id":"10876","full_name":"Niggemann, Oliver"},{"orcid":"0000-0002-3325-7887","full_name":"Lohweg, Volker","first_name":"Volker","id":"1804","last_name":"Lohweg"}],"year":2015,"main_file_link":[{"open_access":"1","url":"https://www.aaai.org/ocs/index.php/AAAI/AAAI15/paper/view/9530/9691"}],"department":[{"_id":"DEP5023"}],"abstract":[{"lang":"eng","text":"Cyber-Physical Production Systems (CPPSs) are in the focus of research, industry and politics: By applying new IT and new computer science solutions, production systems will become more adaptable, more resource ef- ficient and more user friendly. The analysis and diagnosis of such systems is a major part of this trend: Plants should detect automatically wear, faults and suboptimal configurations. This paper reflects the current state-of- the-art in diagnosis against the requirements of CPPSs, identifies three main gaps and gives application scenarios to outline first ideas for potential solutions to close these gaps.\r\n"}],"status":"public","title":"On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda","citation":{"ama":"Niggemann O, Lohweg V. On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda. In: Twenty-Ninth Conference on Artificial Intelligence (AAAI-15). Austin, Texas, USA; 2015.","ieee":"O. Niggemann and V. Lohweg, “On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda,” in Twenty-Ninth Conference on Artificial Intelligence (AAAI-15), 2015.","chicago-de":"Niggemann, Oliver und Volker Lohweg. 2015. On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda. In: Twenty-Ninth Conference on Artificial Intelligence (AAAI-15). Austin, Texas, USA.","din1505-2-1":"Niggemann, Oliver ; Lohweg, Volker: On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda. In: Twenty-Ninth Conference on Artificial Intelligence (AAAI-15). Austin, Texas, USA, 2015","short":"O. Niggemann, V. Lohweg, in: Twenty-Ninth Conference on Artificial Intelligence (AAAI-15), Austin, Texas, USA, 2015.","ufg":"Niggemann, Oliver/Lohweg, Volker (2015): On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda, in: Twenty-Ninth Conference on Artificial Intelligence (AAAI-15), Austin, Texas, USA.","bjps":"Niggemann O and Lohweg V (2015) On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda. Twenty-Ninth Conference on Artificial Intelligence (AAAI-15). Austin, Texas, USA.","havard":"O. Niggemann, V. Lohweg, On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda, in: Twenty-Ninth Conference on Artificial Intelligence (AAAI-15), Austin, Texas, USA, 2015.","mla":"Niggemann, Oliver, and Volker Lohweg. “On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda.” Twenty-Ninth Conference on Artificial Intelligence (AAAI-15), 2015.","van":"Niggemann O, Lohweg V. On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda. In: Twenty-Ninth Conference on Artificial Intelligence (AAAI-15). Austin, Texas, USA; 2015.","chicago":"Niggemann, Oliver, and Volker Lohweg. “On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda.” In Twenty-Ninth Conference on Artificial Intelligence (AAAI-15). Austin, Texas, USA, 2015.","apa":"Niggemann, O., & Lohweg, V. (2015). On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda. In Twenty-Ninth Conference on Artificial Intelligence (AAAI-15). Austin, Texas, USA."}},{"date_updated":"2025-04-11T09:03:04Z","date_created":"2021-01-08T12:03:44Z","publication_identifier":{"eisbn":["978-3-319-20886-2"],"isbn":["978-3-319-20885-5"]},"publication":"Design, User Experience, and Usability: Design Discourse","language":[{"iso":"eng"}],"keyword":["Industrial IT","User-Centered design","Usability","User interfaces","Cyber-Physical-Systems","Industry 4.0","Augmented reality","Development processes and methods"],"volume":9186,"citation":{"ieee":"V. Paelke and C. Röcker, “User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. ,” in Design, User Experience, and Usability: Design Discourse, Los Angeles, CA, USA, 2015, vol. 9186, pp. 75–85. doi: 10.1007/978-3-319-20886-2_8.","ama":"Paelke V, Röcker C. User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. . In: Design, User Experience, and Usability: Design Discourse. Vol 9186. Lecture Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web, and HCI. Springer; 2015:75-85. doi:10.1007/978-3-319-20886-2_8","chicago":"Paelke, Volker, and Carsten Röcker. “User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. .” In Design, User Experience, and Usability: Design Discourse, 9186:75–85. Lecture Notes in Computer Science ; Information Systems and Applications, Incl. Internet/Web, and HCI. Cham: Springer, 2015. https://doi.org/10.1007/978-3-319-20886-2_8.","apa":"Paelke, V., & Röcker, C. (2015). User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. . Design, User Experience, and Usability: Design Discourse, 9186, 75–85. https://doi.org/10.1007/978-3-319-20886-2_8","bjps":"Paelke V and Röcker C (2015) User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. . Design, User Experience, and Usability: Design Discourse, vol. 9186. Cham: Springer, pp. 75–85.","havard":"V. Paelke, C. Röcker, User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. , in: Design, User Experience, and Usability: Design Discourse, Springer, Cham, 2015: pp. 75–85.","mla":"Paelke, Volker, and Carsten Röcker. “User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. .” Design, User Experience, and Usability: Design Discourse, vol. 9186, Springer, 2015, pp. 75–85, https://doi.org/10.1007/978-3-319-20886-2_8.","ufg":"Paelke, Volker/Röcker, Carsten: User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. , in: o. Hg.: Design, User Experience, and Usability: Design Discourse, Bd. 9186, Cham 2015 (Lecture Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web, and HCI), S. 75–85.","van":"Paelke V, Röcker C. User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. . In: Design, User Experience, and Usability: Design Discourse. Cham: Springer; 2015. p. 75–85. (Lecture Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web, and HCI; vol. 9186).","din1505-2-1":"Paelke, Volker ; Röcker, Carsten: User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. . In: Design, User Experience, and Usability: Design Discourse, Lecture Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web, and HCI. Bd. 9186. Cham : Springer, 2015, S. 75–85","chicago-de":"Paelke, Volker und Carsten Röcker. 2015. User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. . In: Design, User Experience, and Usability: Design Discourse, 9186:75–85. Lecture Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web, and HCI. Cham: Springer. doi:10.1007/978-3-319-20886-2_8, .","short":"V. Paelke, C. Röcker, in: Design, User Experience, and Usability: Design Discourse, Springer, Cham, 2015, pp. 75–85."},"title":"User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. ","page":"75-85 ","status":"public","author":[{"full_name":"Paelke, Volker","last_name":"Paelke","first_name":"Volker"},{"first_name":"Carsten","full_name":"Röcker, Carsten","last_name":"Röcker","id":"61525"}],"year":"2015","intvolume":" 9186","user_id":"83781","type":"conference","doi":"10.1007/978-3-319-20886-2_8","_id":"4330","place":"Cham","publication_status":"published","series_title":"Lecture Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web, and HCI","publisher":"Springer","abstract":[{"lang":"eng","text":"Catchwords such as “Cyber-Physical-Systems” and “Industry 4.0” describe the current development of systems with embedded intelligence. These systems can be characterized by an increasing technical complexity that must be addressed in the user interface. In this paper we analyze the specific requirements posed by the interaction with cyber-physical-systems, present a coordinated approach to these requirements and illustrate our approach with a practical example of an assistance system for assembly workers in an industrial production environment."}],"department":[{"_id":"DEP5023"}],"conference":{"name":"4th International Conference, DUXU 2015, Held as Part of HCI International 2015","location":"Los Angeles, CA, USA","start_date":"2015-08-02","end_date":"2015-08-07"}},{"publisher":"Springer","abstract":[{"text":"Our goal is to develop a system for coaching human motions (e.g., for rehabilitation and daily health maintenance). This paper focuses on how to coach a user so that his/her motion gets closer to the good template of a target motion. It is important to efficiently advise the user to emulate the crucial features that define the good template. The proposed system (1) automatically mines the crucial features of any kind of motion from a set of motion features and (2) gives the user feedback about how to modify the motion through an intuitive interface. The crucial features are mined by feature sparsification through binary classification between the samples of good and other motions. An interface for motion coaching is designed to give feedback via different channels (e.g., visually, aurally), depending on the type of error. To use the total system, all the user must do is just move and then get feedback on the motion. Following experimental results, open problems for future work are discussed.","lang":"eng"}],"department":[{"_id":"DEP5023"}],"publication_status":"published","series_title":"Lecture Notes in Computer Science","doi":"10.1007/978-3-319-16226-3_8","_id":"4337","place":"Heidelberg","intvolume":" 8700","user_id":"15514","type":"book_chapter","page":" 189 - 208","status":"public","author":[{"first_name":"Norimichi","last_name":"Ukita","full_name":"Ukita, Norimichi"},{"last_name":"Kaulen","first_name":"Daniel ","full_name":"Kaulen, Daniel "},{"last_name":"Röcker","first_name":"Carsten","full_name":"Röcker, Carsten","id":"61525"}],"main_file_link":[{"open_access":"1"}],"year":2015,"volume":8700,"citation":{"chicago-de":"Ukita, Norimichi, Daniel Kaulen und Carsten Röcker. 2015. A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health. In: Smart Health : Open Problems and Future Challenges, hg. von Andreas Holzinger, Carsten Röcker, und Martina Ziefle, 8700:189–208. Lecture Notes in Computer Science. Heidelberg: Springer. doi:10.1007/978-3-319-16226-3_8, .","din1505-2-1":"Ukita, Norimichi ; Kaulen, Daniel ; Röcker, Carsten: A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health. In: Holzinger, A. ; Röcker, C. ; Ziefle, M. (Hrsg.): Smart Health : Open Problems and Future Challenges, Lecture Notes in Computer Science. Bd. 8700. Heidelberg : Springer, 2015, S. 189–208","short":"N. Ukita, D. Kaulen, C. Röcker, in: A. Holzinger, C. Röcker, M. Ziefle (Eds.), Smart Health : Open Problems and Future Challenges, Springer, Heidelberg, 2015, pp. 189–208.","ufg":"Ukita, Norimichi et. al. (2015): A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health, in: Andreas Holzinger et. al. (Hgg.): Smart Health : Open Problems and Future Challenges (=Lecture Notes in Computer Science 8700), Heidelberg, S. 189–208.","havard":"N. Ukita, D. Kaulen, C. Röcker, A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health, in: A. Holzinger, C. Röcker, M. Ziefle (Eds.), Smart Health : Open Problems and Future Challenges, Springer, Heidelberg, 2015: pp. 189–208.","mla":"Ukita, Norimichi, et al. “A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health.” Smart Health : Open Problems and Future Challenges, edited by Andreas Holzinger et al., vol. 8700, Springer, 2015, pp. 189–208, doi:10.1007/978-3-319-16226-3_8.","bjps":"Ukita N, Kaulen D and Röcker C (2015) A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health. In Holzinger A, Röcker C and Ziefle M (eds), Smart Health : Open Problems and Future Challenges, vol. 8700. Heidelberg: Springer, pp. 189–208.","van":"Ukita N, Kaulen D, Röcker C. A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health. In: Holzinger A, Röcker C, Ziefle M, editors. Smart Health : Open Problems and Future Challenges. Heidelberg: Springer; 2015. p. 189–208. (Lecture Notes in Computer Science; vol. 8700).","ama":"Ukita N, Kaulen D, Röcker C. A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health. In: Holzinger A, Röcker C, Ziefle M, eds. Smart Health : Open Problems and Future Challenges. Vol 8700. Lecture Notes in Computer Science. Heidelberg: Springer; 2015:189-208. doi:10.1007/978-3-319-16226-3_8","chicago":"Ukita, Norimichi, Daniel Kaulen, and Carsten Röcker. “A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health.” In Smart Health : Open Problems and Future Challenges, edited by Andreas Holzinger, Carsten Röcker, and Martina Ziefle, 8700:189–208. Lecture Notes in Computer Science. Heidelberg: Springer, 2015. https://doi.org/10.1007/978-3-319-16226-3_8.","apa":"Ukita, N., Kaulen, D., & Röcker, C. (2015). A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health. In A. Holzinger, C. Röcker, & M. Ziefle (Eds.), Smart Health : Open Problems and Future Challenges (Vol. 8700, pp. 189–208). Heidelberg: Springer. https://doi.org/10.1007/978-3-319-16226-3_8","ieee":"N. Ukita, D. Kaulen, and C. Röcker, “A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health,” in Smart Health : Open Problems and Future Challenges, vol. 8700, A. Holzinger, C. Röcker, and M. Ziefle, Eds. Heidelberg: Springer, 2015, pp. 189–208."},"title":"A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive Health","language":[{"iso":"eng"}],"keyword":["Motion coaching","Error feedback","Physical rehabilitation"],"oa":"1","editor":[{"last_name":"Holzinger","first_name":"Andreas","full_name":"Holzinger, Andreas"},{"full_name":"Röcker, Carsten","id":"61525","last_name":"Röcker","first_name":"Carsten"},{"full_name":"Ziefle, Martina","first_name":"Martina","last_name":"Ziefle"}],"date_updated":"2023-03-15T13:49:52Z","date_created":"2021-01-08T12:03:53Z","publication_identifier":{"eisbn":["978-3-319-16226-3"],"isbn":["978-3-319-16225-6"]},"publication":"Smart Health : Open Problems and Future Challenges"},{"title":"Machine Conditioning by Importance Controlled Information Fusion","publication_status":"published","citation":{"ama":"Mönks U, Lohweg V. Machine Conditioning by Importance Controlled Information Fusion. In: IEEE, ed. 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy; 2013. doi:10.1109/ETFA.2013.6647984","ieee":"U. Mönks and V. Lohweg, “Machine Conditioning by Importance Controlled Information Fusion,” in 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2013.","short":"U. Mönks, V. Lohweg, in: IEEE (Ed.), 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Cagliari, Italy, 2013.","chicago-de":"Mönks, Uwe und Volker Lohweg. 2013. Machine Conditioning by Importance Controlled Information Fusion. In: 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), hg. von IEEE. Cagliari, Italy. doi:10.1109/ETFA.2013.6647984, .","din1505-2-1":"Mönks, Uwe ; Lohweg, Volker: Machine Conditioning by Importance Controlled Information Fusion. In: IEEE (Hrsg.): 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy, 2013","van":"Mönks U, Lohweg V. Machine Conditioning by Importance Controlled Information Fusion. In: IEEE, editor. 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy; 2013.","bjps":"Mönks U and Lohweg V (2013) Machine Conditioning by Importance Controlled Information Fusion. In IEEE (ed.), 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy.","mla":"Mönks, Uwe, and Volker Lohweg. “Machine Conditioning by Importance Controlled Information Fusion.” 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), edited by IEEE, 2013, doi:10.1109/ETFA.2013.6647984.","havard":"U. Mönks, V. Lohweg, Machine Conditioning by Importance Controlled Information Fusion, in: IEEE (Ed.), 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Cagliari, Italy, 2013.","ufg":"Mönks, Uwe/Lohweg, Volker (2013): Machine Conditioning by Importance Controlled Information Fusion, in: IEEE (Hg.): 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Cagliari, Italy.","apa":"Mönks, U., & Lohweg, V. (2013). Machine Conditioning by Importance Controlled Information Fusion. In IEEE (Ed.), 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy. https://doi.org/10.1109/ETFA.2013.6647984","chicago":"Mönks, Uwe, and Volker Lohweg. “Machine Conditioning by Importance Controlled Information Fusion.” In 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), edited by IEEE. Cagliari, Italy, 2013. https://doi.org/10.1109/ETFA.2013.6647984."},"department":[{"_id":"DEP5023"}],"author":[{"full_name":"Mönks, Uwe","first_name":"Uwe","last_name":"Mönks","id":"1825"},{"orcid":"0000-0002-3325-7887","last_name":"Lohweg","id":"1804","full_name":"Lohweg, Volker","first_name":"Volker"}],"year":2013,"abstract":[{"text":"Sensor and information fusion is recently a major topic which becomes important in machine diagnosis and conditioning for complex production machines and process engineering. It is a known fact that distributed automation systems have a major impact on signal processing and pattern recognition for machine diagnosis. Therefore, it is necessary to research and develop smart diagnosis methods which are applicable for distributed systems like resource-limited cyber-physical systems. In this paper we propose an new approach for sensor and information fusion based on Evidence Theory and socio-psychological decision-making. We show that context based condition monitoring is instantiated even in conflict situations, oc-curing in real life scenarios permanently. A simple but effective importance measure is proposed which controls the significance of conditioning propositions in a system.","lang":"eng"}],"status":"public","type":"conference","date_created":"2019-12-04T09:30:15Z","publication":"18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)","publication_identifier":{"eisbn":["978-1-4799-0864-6"],"issn":["1946-0740 "],"isbn":["978-1-4799-0862-2"],"eissn":["1946-0759 "]},"date_updated":"2023-03-15T13:49:39Z","user_id":"45673","corporate_editor":["IEEE"],"language":[{"iso":"eng"}],"place":"Cagliari, Italy","keyword":["Decision making","Robot sensing systems","Reliability","Production","Context","Fuzzy set theory","Data integration"],"doi":"10.1109/ETFA.2013.6647984","_id":"2141"},{"place":"Totowa, NJ","_id":"2394","doi":"10.1007/978-1-62703-733-4_22","type":"book_chapter","user_id":"74004","intvolume":" 1104","department":[{"_id":"DEP4021"}],"abstract":[{"text":"For the production of biopharmaceuticals a seed train is required to generate an adequate number of cells for inoculation of the production bioreactor. This seed train is time- and cost-intensive but offers potential for optimization. A method and a protocol are described for the seed train mapping, directed modeling without major effort, and its optimization regarding selected optimization criteria such as optimal points in time for cell passaging. Furthermore, the method can also be applied for the set-up of a new seed train, for example for a new cell line. Although the chapter is directed towards suspension cell lines, the method is also generally applicable, e.g. for adherent cell lines.","lang":"eng"}],"publisher":"Humana Press","series_title":"Methods in Molecular Biology ","publication_status":"published","keyword":["Seed train Optimization Modeling Prediction Space-Time-Yield (STY) Systems approach Bioinformatics Computational biotechnology Suspension Production"],"language":[{"iso":"eng"}],"publication_identifier":{"isbn":["9781627037327"],"eisbn":["9781627037334"],"issn":["1064-3745","1940-6029"]},"publication":"Animal Cell Biotechnology","date_created":"2020-05-19T14:45:43Z","date_updated":"2023-03-15T13:49:39Z","year":2013,"author":[{"last_name":"Frahm","first_name":"Björn","full_name":"Frahm, Björn"}],"status":"public","page":"355-367","title":"Seed Train Optimization for Cell Culture","volume":1104,"citation":{"van":"Frahm B. Seed Train Optimization for Cell Culture. In: Animal Cell Biotechnology. Totowa, NJ: Humana Press; 2013. p. 355–67. (Methods in Molecular Biology ; vol. 1104).","havard":"B. Frahm, Seed Train Optimization for Cell Culture, in: Animal Cell Biotechnology, Humana Press, Totowa, NJ, 2013: pp. 355–367.","mla":"Frahm, Björn. “Seed Train Optimization for Cell Culture.” Animal Cell Biotechnology, vol. 1104, Humana Press, 2013, pp. 355–67, doi:10.1007/978-1-62703-733-4_22.","bjps":"Frahm B (2013) Seed Train Optimization for Cell Culture. Animal Cell Biotechnology, vol. 1104. Totowa, NJ: Humana Press, pp. 355–367.","ufg":"Frahm, Björn (2013): Seed Train Optimization for Cell Culture, in: Animal Cell Biotechnology (=Methods in Molecular Biology 1104), Totowa, NJ, S. 355–367.","apa":"Frahm, B. (2013). Seed Train Optimization for Cell Culture. In Animal Cell Biotechnology (Vol. 1104, pp. 355–367). Totowa, NJ: Humana Press. https://doi.org/10.1007/978-1-62703-733-4_22","chicago":"Frahm, Björn. “Seed Train Optimization for Cell Culture.” In Animal Cell Biotechnology, 1104:355–67. Methods in Molecular Biology . Totowa, NJ: Humana Press, 2013. https://doi.org/10.1007/978-1-62703-733-4_22.","short":"B. Frahm, in: Animal Cell Biotechnology, Humana Press, Totowa, NJ, 2013, pp. 355–367.","chicago-de":"Frahm, Björn. 2013. Seed Train Optimization for Cell Culture. In: Animal Cell Biotechnology, 1104:355–367. Methods in Molecular Biology . Totowa, NJ: Humana Press. doi:10.1007/978-1-62703-733-4_22, .","din1505-2-1":"Frahm, Björn: Seed Train Optimization for Cell Culture. In: Animal Cell Biotechnology, Methods in Molecular Biology . Bd. 1104. Totowa, NJ : Humana Press, 2013, S. 355–367","ama":"Frahm B. Seed Train Optimization for Cell Culture. In: Animal Cell Biotechnology. Vol 1104. Methods in Molecular Biology . Totowa, NJ: Humana Press; 2013:355-367. doi:10.1007/978-1-62703-733-4_22","ieee":"B. Frahm, “Seed Train Optimization for Cell Culture,” in Animal Cell Biotechnology, vol. 1104, Totowa, NJ: Humana Press, 2013, pp. 355–367."}},{"language":[{"iso":"eng"}],"keyword":["Seed train","Optimization","Modeling","Prediction","Space-Time-Yield (STY)","Systems approach","Bioinformatics","Computational biotechnology","Suspension","Production"],"editor":[{"full_name":"Pörtner, Ralf","last_name":"Pörtner","first_name":"Ralf"}],"date_updated":"2023-08-16T06:41:21Z","edition":"3","date_created":"2023-08-14T17:50:56Z","publication":"Animal Cell Biotechnology - Methods and Protocols","publication_identifier":{"issn":["1064-3745"],"eisbn":["978-1-62703-733-4"],"isbn":["978-1-62703-732-7"],"eissn":["1940-6029"]},"page":"355–367","status":"public","year":"2013","author":[{"full_name":"Frahm, Björn","first_name":"Björn","id":"45666","last_name":"Frahm"}],"volume":1104,"citation":{"ama":"Frahm B. Seed Train Optimization for Cell Culture. In: Pörtner R, ed. Animal Cell Biotechnology - Methods and Protocols. Vol 1104. 3rd ed. Methods in Molecular Biology. Humana Press; 2013:355-367. doi:10.1007/978-1-62703-733-4_22","ieee":"B. Frahm, “Seed Train Optimization for Cell Culture,” in Animal Cell Biotechnology - Methods and Protocols, 3rd ed., vol. 1104, R. Pörtner, Ed. Totowa, NJ: Humana Press, 2013, pp. 355–367. doi: 10.1007/978-1-62703-733-4_22.","din1505-2-1":"Frahm, Björn: Seed Train Optimization for Cell Culture. In: Pörtner, R. (Hrsg.): Animal Cell Biotechnology - Methods and Protocols, Methods in Molecular Biology. Bd. 1104. 3. Aufl. Totowa, NJ : Humana Press, 2013, S. 355–367","chicago-de":"Frahm, Björn. 2013. Seed Train Optimization for Cell Culture. In: Animal Cell Biotechnology - Methods and Protocols, hg. von Ralf Pörtner, 1104:355–367. 3. Aufl. Methods in Molecular Biology. Totowa, NJ: Humana Press. doi:10.1007/978-1-62703-733-4_22, .","short":"B. Frahm, in: R. Pörtner (Ed.), Animal Cell Biotechnology - Methods and Protocols, 3rd ed., Humana Press, Totowa, NJ, 2013, pp. 355–367.","ufg":"Frahm, Björn: Seed Train Optimization for Cell Culture, in: Pörtner, Ralf (Hg.): Animal Cell Biotechnology - Methods and Protocols, Bd. 1104, Totowa, NJ 32013 (Methods in Molecular Biology), S. 355–367.","bjps":"Frahm B (2013) Seed Train Optimization for Cell Culture. In Pörtner R (ed.), Animal Cell Biotechnology - Methods and Protocols, 3rd ed., vol. 1104. Totowa, NJ: Humana Press, pp. 355–367.","mla":"Frahm, Björn. “Seed Train Optimization for Cell Culture.” Animal Cell Biotechnology - Methods and Protocols, edited by Ralf Pörtner, 3rd ed., vol. 1104, Humana Press, 2013, pp. 355–67, https://doi.org/10.1007/978-1-62703-733-4_22.","havard":"B. Frahm, Seed Train Optimization for Cell Culture, in: R. Pörtner (Ed.), Animal Cell Biotechnology - Methods and Protocols, 3rd ed., Humana Press, Totowa, NJ, 2013: pp. 355–367.","van":"Frahm B. Seed Train Optimization for Cell Culture. In: Pörtner R, editor. Animal Cell Biotechnology - Methods and Protocols. 3rd ed. Totowa, NJ: Humana Press; 2013. p. 355–67. (Methods in Molecular Biology; vol. 1104).","chicago":"Frahm, Björn. “Seed Train Optimization for Cell Culture.” In Animal Cell Biotechnology - Methods and Protocols, edited by Ralf Pörtner, 3rd ed., 1104:355–67. Methods in Molecular Biology. Totowa, NJ: Humana Press, 2013. https://doi.org/10.1007/978-1-62703-733-4_22.","apa":"Frahm, B. (2013). Seed Train Optimization for Cell Culture. In R. Pörtner (Ed.), Animal Cell Biotechnology - Methods and Protocols (3rd ed., Vol. 1104, pp. 355–367). Humana Press. https://doi.org/10.1007/978-1-62703-733-4_22"},"title":"Seed Train Optimization for Cell Culture","doi":"10.1007/978-1-62703-733-4_22","_id":"10214","place":"Totowa, NJ","intvolume":" 1104","user_id":"83781","type":"book_chapter","publisher":"Humana Press","abstract":[{"text":"For the production of biopharmaceuticals a seed train is required to generate an adequate number of cells for inoculation of the production bioreactor. This seed train is time- and cost-intensive but offers potential for optimization. A method and a protocol are described for the seed train mapping, directed modeling without major effort, and its optimization regarding selected optimization criteria such as optimal points in time for cell passaging. Furthermore, the method can also be applied for the set-up of a new seed train, for example for a new cell line. Although the chapter is directed towards suspension cell lines, the method is also generally applicable, e.g. for adherent cell lines.","lang":"eng"}],"department":[{"_id":"DEP4000"}],"publication_status":"published","series_title":"Methods in Molecular Biology"},{"citation":{"short":"K. Voth, A. Dicks, V. Lohweg, in: 2011.","din1505-2-1":"Voth, Karl ; Dicks, Alexander ; Lohweg, Volker: Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund. In: , 2011","chicago-de":"Voth, Karl, Alexander Dicks und Volker Lohweg. 2011. Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund. In: .","ieee":"K. Voth, A. Dicks, and V. Lohweg, “Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund,” 2011.","apa":"Voth, K., Dicks, A., & Lohweg, V. (2011). Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund.","chicago":"Voth, Karl, Alexander Dicks, and Volker Lohweg. “Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund,” 2011.","ama":"Voth K, Dicks A, Lohweg V. Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund. In: ; 2011.","van":"Voth K, Dicks A, Lohweg V. Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund. In 2011.","bjps":"Voth K, Dicks A and Lohweg V (2011) Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund.","havard":"K. Voth, A. Dicks, V. Lohweg, Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund, in: 2011.","mla":"Voth, Karl, et al. Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund. 2011.","ufg":"Voth, Karl et. al. (2011): Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund, in: ."},"publication_status":"published","title":"Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund","status":"public","abstract":[{"text":"Die Zustandsüberwachung erfolgt derzeit in der Regel durch Einsatz spezieller Sensorik, bspw. durch Vibrationsmessungen. Außerdem werden die Antriebe lediglich isoliert betrachtet, eine Zusammenführung anfallender Informationen eines räumlich verteilten Antriebsverbunds findet meist nicht statt. Im Folgenden wird ein neuartiges Motor-as-Sensor-Konzept vorgeschlagen und validiert, das eine antizipatorische Zustandsüberwachung ohne Einsatz zusätzlicher Sensorik allein durch Verarbeitung der phasenbezogenen Motorströme ermöglicht. Zusätzlich wird ein Informationsfusionskonzept vorge-stellt, das die Informationen aller im Verbund beteiligten Antriebe zusammenführt, um darüber eine mit weniger Unsicherheiten behaftete Aussage über den Zustand einer Ap-plikation herbeizuführen. Das Hauptaugenmerk liegt hierbei insbesondere auf der Beherrschung der anfallenden riesigen Datenmengen, die zur Verarbeitung in eingebetteten Systemen reduziert werden müssen.","lang":"ger"}],"author":[{"first_name":"Karl","full_name":"Voth, Karl","last_name":"Voth"},{"id":"1853","full_name":"Dicks, Alexander","last_name":"Dicks","first_name":"Alexander"},{"orcid":"0000-0002-3325-7887","full_name":"Lohweg, Volker","first_name":"Volker","id":"1804","last_name":"Lohweg"}],"year":2011,"department":[{"_id":"DEP5023"}],"user_id":"45673","date_updated":"2023-03-15T13:49:38Z","date_created":"2019-12-02T14:32:58Z","type":"conference","_id":"2102","keyword":["Sensor- und Informationsfusion","elektrischer Antrieb","Cyber-Physical System","Industrie 4.0","Big Data"],"language":[{"iso":"ger"}]},{"user_id":"83781","date_updated":"2023-07-28T13:23:19Z","publication":" 2009 6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops","publication_identifier":{"isbn":["978-1-4244-3938-6"]},"date_created":"2022-05-17T14:05:13Z","type":"conference_editor_article","keyword":["Cognitive radio","Quality of service","Space technology","Frequency","Production facilities","Chromium","Manufacturing automation","Intelligent systems","Polarization","Testing"],"place":"Piscataway, NJ","language":[{"iso":"eng"}],"_id":"8274","doi":"10.1109/SAHCNW.2009.5172916","citation":{"din1505-2-1":"Ahmad, Kaleem ; Meier, Uwe ; Pape, Andreas ; Kwasnicka, Halina ; Griese, Bjoern: A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems. Piscataway, NJ : IEEE , 2009","chicago-de":"Ahmad, Kaleem, Uwe Meier, Andreas Pape, Halina Kwasnicka und Bjoern Griese. 2009. A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems. 2009 6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops. Piscataway, NJ: IEEE . doi:10.1109/SAHCNW.2009.5172916, .","short":"K. Ahmad, U. Meier, A. Pape, H. Kwasnicka, B. Griese, A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems, IEEE , Piscataway, NJ, 2009.","chicago":"Ahmad, Kaleem, Uwe Meier, Andreas Pape, Halina Kwasnicka, and Bjoern Griese. A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems. 2009 6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops. Piscataway, NJ: IEEE , 2009. https://doi.org/10.1109/SAHCNW.2009.5172916.","apa":"Ahmad, K., Meier, U., Pape, A., Kwasnicka, H., & Griese, B. (2009). A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems. In 2009 6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops. 6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops, Rome, Italy . IEEE . https://doi.org/10.1109/SAHCNW.2009.5172916","mla":"Ahmad, Kaleem, et al. “A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems.” 2009 6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops, IEEE , 2009, https://doi.org/10.1109/SAHCNW.2009.5172916.","bjps":"Ahmad K et al. (2009) A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems. Piscataway, NJ: IEEE .","havard":"K. Ahmad, U. Meier, A. Pape, H. Kwasnicka, B. Griese, A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems, IEEE , Piscataway, NJ, 2009.","ufg":"Ahmad, Kaleem u. a.: A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems, Piscataway, NJ 2009.","van":"Ahmad K, Meier U, Pape A, Kwasnicka H, Griese B. A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems. 2009 6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops. Piscataway, NJ: IEEE ; 2009.","ieee":"K. Ahmad, U. Meier, A. Pape, H. Kwasnicka, and B. Griese, A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems. Piscataway, NJ: IEEE , 2009. doi: 10.1109/SAHCNW.2009.5172916.","ama":"Ahmad K, Meier U, Pape A, Kwasnicka H, Griese B. A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems. IEEE ; 2009. doi:10.1109/SAHCNW.2009.5172916"},"publication_status":"published","title":"A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems","status":"public","publisher":"IEEE ","author":[{"first_name":"Kaleem","full_name":"Ahmad, Kaleem","last_name":"Ahmad"},{"last_name":"Meier","id":"1143","full_name":"Meier, Uwe","first_name":"Uwe"},{"last_name":"Pape","first_name":"Andreas","full_name":"Pape, Andreas"},{"full_name":"Kwasnicka, Halina","first_name":"Halina","last_name":"Kwasnicka"},{"full_name":"Griese, Bjoern","first_name":"Bjoern","last_name":"Griese"}],"year":"2009","conference":{"name":"6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops","location":"Rome, Italy ","start_date":"2009-06-22","end_date":"2009-06-26"},"department":[{"_id":"DEP5000"},{"_id":"DEP5014"}],"abstract":[{"lang":"eng","text":"The need for multiple radio systems in overlapping regions of a factory plant introduces a coexistence problem. The current research challenge is to design and realize radio systems that should be able to achieve a desired quality of service (QoS) in this coexisting environment. Currently transmission resources of hyperspace are not properly exploited. The cognitive radio (CR), which can adapt to the environmental changes by reconfiguring itself, can be used to implement intelligent radio systems to exploit the orthogonal nature of multiple dimensions of hyperspace to maintain the desired QoS in coexisting factory environments. We present initial results of a coexistence optimized CR which can exploit frequency and power, which are two of several dimensions of hyperspace, to improve its QoS in coexisting environments."}]},{"publication_status":"published","series_title":"Lecture Notes in Computer Science","publisher":"Springer","department":[{"_id":"DEP5023"}],"conference":{"name":"4th International Conference on Universal Access in Human-Computer Interaction, UAHCI 2007, Held as Part of HCI International 2007","location":"Beijing, China","start_date":"2007-07-22","end_date":"2007-07-27"},"abstract":[{"text":"Several evaluations of team awareness systems showed, that interruptions and privacy violations during usage often lead to the rejection of the system by users. Most authors argue that this rejection is due to a fundamental dual trade-off between sending awareness information and privacy, and between receiving awareness information and disruption or resource consumption. While the assumption of a fundamental trade-off is widely accepted in state-of-the-art research, this paper disputes the predominant hypothesis. Instead, it is argued, that the trade-off is not of fundamental nature, but caused by neglecting elementary aspects in the design process. In order to verify this line of argument, a novel interface concept for mediating socio-emotional awareness information is presented. To verify the validity of the conceptual approach, several evaluations were conducted. The evaluations verified the approach of this paper and showed, that a cautious interface design can enhance user privacy in multi-user awareness systems and minimize disruptive effects on primary tasks, without reducing awareness mediation and usability.","lang":"eng"}],"user_id":"83781","intvolume":" 4554","type":"conference","place":"Berlin","_id":"4768","doi":"10.1007/978-3-540-73279-2_31","citation":{"van":"Röcker C, Magerkurth C. Privacy and Interruptions in Team Awareness Systems. In: Stephanidis C, editor. Universal Acess in Human Computer Interaction : Coping with Diversity. Berlin: Springer; 2007. p. 273–83. (Lecture Notes in Computer Science; vol. 4554).","mla":"Röcker, Carsten, and Carsten Magerkurth. “Privacy and Interruptions in Team Awareness Systems.” Universal Acess in Human Computer Interaction : Coping with Diversity, edited by Constantine Stephanidis, vol. 4554, Springer, 2007, pp. 273–83, https://doi.org/10.1007/978-3-540-73279-2_31.","bjps":"Röcker C and Magerkurth C (2007) Privacy and Interruptions in Team Awareness Systems. In Stephanidis C (ed.), Universal Acess in Human Computer Interaction : Coping with Diversity, vol. 4554. Berlin: Springer, pp. 273–283.","havard":"C. Röcker, C. Magerkurth, Privacy and Interruptions in Team Awareness Systems, in: C. Stephanidis (Ed.), Universal Acess in Human Computer Interaction : Coping with Diversity, Springer, Berlin, 2007: pp. 273–283.","ufg":"Röcker, Carsten/Magerkurth, Carsten: Privacy and Interruptions in Team Awareness Systems, in: Stephanidis, Constantine (Hg.): Universal Acess in Human Computer Interaction : Coping with Diversity, Bd. 4554, Berlin 2007 (Lecture Notes in Computer Science), S. 273–283.","apa":"Röcker, C., & Magerkurth, C. (2007). Privacy and Interruptions in Team Awareness Systems. In C. Stephanidis (Ed.), Universal Acess in Human Computer Interaction : Coping with Diversity (Vol. 4554, pp. 273–283). Springer. https://doi.org/10.1007/978-3-540-73279-2_31","chicago":"Röcker, Carsten, and Carsten Magerkurth. “Privacy and Interruptions in Team Awareness Systems.” In Universal Acess in Human Computer Interaction : Coping with Diversity, edited by Constantine Stephanidis, 4554:273–83. Lecture Notes in Computer Science. Berlin: Springer, 2007. https://doi.org/10.1007/978-3-540-73279-2_31.","short":"C. Röcker, C. Magerkurth, in: C. Stephanidis (Ed.), Universal Acess in Human Computer Interaction : Coping with Diversity, Springer, Berlin, 2007, pp. 273–283.","din1505-2-1":"Röcker, Carsten ; Magerkurth, Carsten: Privacy and Interruptions in Team Awareness Systems. In: Stephanidis, C. (Hrsg.): Universal Acess in Human Computer Interaction : Coping with Diversity, Lecture Notes in Computer Science. Bd. 4554. Berlin : Springer, 2007, S. 273–283","chicago-de":"Röcker, Carsten und Carsten Magerkurth. 2007. Privacy and Interruptions in Team Awareness Systems. In: Universal Acess in Human Computer Interaction : Coping with Diversity, hg. von Constantine Stephanidis, 4554:273–283. Lecture Notes in Computer Science. Berlin: Springer. doi:10.1007/978-3-540-73279-2_31, .","ama":"Röcker C, Magerkurth C. Privacy and Interruptions in Team Awareness Systems. In: Stephanidis C, ed. Universal Acess in Human Computer Interaction : Coping with Diversity. Vol 4554. Lecture Notes in Computer Science. Springer; 2007:273-283. doi:10.1007/978-3-540-73279-2_31","ieee":"C. Röcker and C. Magerkurth, “Privacy and Interruptions in Team Awareness Systems,” in Universal Acess in Human Computer Interaction : Coping with Diversity, Beijing, China, 2007, vol. 4554, pp. 273–283. doi: 10.1007/978-3-540-73279-2_31."},"volume":4554,"title":"Privacy and Interruptions in Team Awareness Systems","extern":"1","status":"public","page":"273-283","year":"2007","author":[{"last_name":"Röcker","id":"61525","full_name":"Röcker, Carsten","first_name":"Carsten"},{"first_name":"Carsten","last_name":"Magerkurth","full_name":"Magerkurth, Carsten"}],"date_updated":"2025-04-11T09:00:27Z","editor":[{"first_name":"Constantine","last_name":"Stephanidis","full_name":"Stephanidis, Constantine"}],"publication_identifier":{"isbn":["978-3-540-73278-5"],"eisbn":["978-3-540-73279-2"]},"publication":"Universal Acess in Human Computer Interaction : Coping with Diversity","date_created":"2021-01-29T10:05:33Z","keyword":["Privacy","Interruptions","Team Awareness Systems","Dual Trade-Off : Evaluation"],"language":[{"iso":"eng"}]},{"_id":"2062","doi":"10.1109/ICIF.2006.301779","keyword":["Information security","Inspection","Printing machinery","Optical sensors","Data security","Personnel","Fuzzy systems","Sensor systems","Expert systems","Ink"],"language":[{"iso":"eng"}],"publication_identifier":{"isbn":[" 1-4244-0953-5"]},"publication":" 2006 9th International Conference on Information Fusion","type":"conference","date_created":"2019-11-29T13:35:03Z","user_id":"45673","date_updated":"2023-03-15T13:49:38Z","abstract":[{"text":"Bank note inspection is a complex task. As more and more print techniques and new security features are established, total quality security and bank note printing must be assured. Therefore, this factor necessitates change of a sensorial concept in general. We propose an optical-acoustical inspection method based upon the concepts of information fusion and fuzzy interpretation of data measures. Furthermore, we present a simplified scheme for information fusion for pattern recognition and data classification based on parametrical unimodal potential functions and a Sugeno-type score value analysis. Digital Object Identifier: 10.1109/ICIF.2006.301779
","lang":"eng"}],"main_file_link":[{"url":"https://ieeexplore.ieee.org/document/4086065/keywords#full-text-header"}],"author":[{"first_name":"Walter","full_name":"Dyck, Walter","last_name":"Dyck"},{"last_name":"Schaede","id":"2128","first_name":"Johannes","full_name":"Schaede, Johannes"},{"first_name":"Thomas","full_name":"Türke, Thomas","last_name":"Türke"},{"orcid":"0000-0002-3325-7887","first_name":"Volker","last_name":"Lohweg","id":"1804","full_name":"Lohweg, Volker"}],"year":2006,"department":[{"_id":"DEP5023"}],"publisher":"9th International Conference on Information Fusion, 2006. ICIF '06","status":"public","page":"1-8","title":"Information Fusion Application On Security Printing With Parametrical Fuzzy Classification","citation":{"van":"Dyck W, Schaede J, Türke T, Lohweg V. Information Fusion Application On Security Printing With Parametrical Fuzzy Classification. In: 2006 9th International Conference on Information Fusion. 9th International Conference on Information Fusion, 2006. ICIF ’06; 2006. p. 1–8.","ufg":"Dyck, Walter et. al. (2006): Information Fusion Application On Security Printing With Parametrical Fuzzy Classification, in: 2006 9th International Conference on Information Fusion, S. 1–8.","havard":"W. Dyck, J. Schaede, T. Türke, V. Lohweg, Information Fusion Application On Security Printing With Parametrical Fuzzy Classification, in: 2006 9th International Conference on Information Fusion, 9th International Conference on Information Fusion, 2006. ICIF ’06, 2006: pp. 1–8.","mla":"Dyck, Walter, et al. “Information Fusion Application On Security Printing With Parametrical Fuzzy Classification.” 2006 9th International Conference on Information Fusion, 9th International Conference on Information Fusion, 2006. ICIF ’06, 2006, pp. 1–8, doi:10.1109/ICIF.2006.301779.","bjps":"Dyck W et al. (2006) Information Fusion Application On Security Printing With Parametrical Fuzzy Classification. 2006 9th International Conference on Information Fusion. 9th International Conference on Information Fusion, 2006. ICIF ’06, pp. 1–8.","apa":"Dyck, W., Schaede, J., Türke, T., & Lohweg, V. (2006). Information Fusion Application On Security Printing With Parametrical Fuzzy Classification. In 2006 9th International Conference on Information Fusion (pp. 1–8). 9th International Conference on Information Fusion, 2006. ICIF ’06. https://doi.org/10.1109/ICIF.2006.301779","chicago":"Dyck, Walter, Johannes Schaede, Thomas Türke, and Volker Lohweg. “Information Fusion Application On Security Printing With Parametrical Fuzzy Classification.” In 2006 9th International Conference on Information Fusion, 1–8. 9th International Conference on Information Fusion, 2006. ICIF ’06, 2006. https://doi.org/10.1109/ICIF.2006.301779.","short":"W. Dyck, J. Schaede, T. Türke, V. Lohweg, in: 2006 9th International Conference on Information Fusion, 9th International Conference on Information Fusion, 2006. ICIF ’06, 2006, pp. 1–8.","din1505-2-1":"Dyck, Walter ; Schaede, Johannes ; Türke, Thomas ; Lohweg, Volker: Information Fusion Application On Security Printing With Parametrical Fuzzy Classification. In: 2006 9th International Conference on Information Fusion : 9th International Conference on Information Fusion, 2006. ICIF ’06, 2006, S. 1–8","chicago-de":"Dyck, Walter, Johannes Schaede, Thomas Türke und Volker Lohweg. 2006. Information Fusion Application On Security Printing With Parametrical Fuzzy Classification. In: 2006 9th International Conference on Information Fusion, 1–8. 9th International Conference on Information Fusion, 2006. ICIF ’06. doi:10.1109/ICIF.2006.301779, .","ama":"Dyck W, Schaede J, Türke T, Lohweg V. Information Fusion Application On Security Printing With Parametrical Fuzzy Classification. In: 2006 9th International Conference on Information Fusion. 9th International Conference on Information Fusion, 2006. ICIF ’06; 2006:1-8. doi:10.1109/ICIF.2006.301779","ieee":"W. Dyck, J. Schaede, T. Türke, and V. Lohweg, “Information Fusion Application On Security Printing With Parametrical Fuzzy Classification,” in 2006 9th International Conference on Information Fusion, 2006, pp. 1–8."},"publication_status":"published"},{"user_id":"45673","type":"conference","place":"Genova","_id":"2058","doi":" 10.1109/ICIP.2005.1529759","publication_status":"published","publisher":"IEEE","department":[{"_id":"DEP5023"}],"abstract":[{"lang":"eng","text":"Nonlinear spatial transforms and fuzzy pattern classification with unimodal potential functions are established in signal processing. They have proved to be excellent tools in feature extraction and classification. In this paper we present a hardware accelerated image processing and classification scheme for rotation and translation tolerant two-dimensional pattern recognition, which is based on one-dimensional nonlinear discrete circular transforms. However, the scheme is simple; it is stable and therefore well suited for industrial applications. An implementation on one field programmable gate array (FPGA) is proposed."}],"date_updated":"2023-03-15T13:49:38Z","publication":"IEEE International Conference On Image Processing (ICIP), Proceedings","publication_identifier":{"issn":["1522-4880 "],"eissn":["2381-8549 "],"isbn":["0-7803-9134-9"]},"date_created":"2019-11-29T13:17:49Z","keyword":["Pattern recognition","Field programmable gate arrays","Neural networks","Image processing","Discrete transforms","Signal processing","Image retrieval","Image recognition","Transient analysis","Fuzzy systems"],"language":[{"iso":"eng"}],"citation":{"din1505-2-1":"Henke, Tobias ; Lohweg, Volker: A Simplified Scheme For Hardware-Based Pattern Recognition. In: IEEE International Conference On Image Processing (ICIP), Proceedings. Genova : IEEE, 2005, S. 349–352","chicago-de":"Henke, Tobias und Volker Lohweg. 2005. A Simplified Scheme For Hardware-Based Pattern Recognition. In: IEEE International Conference On Image Processing (ICIP), Proceedings, 349–352. Genova: IEEE. doi: 10.1109/ICIP.2005.1529759, .","short":"T. Henke, V. Lohweg, in: IEEE International Conference On Image Processing (ICIP), Proceedings, IEEE, Genova, 2005, pp. 349–352.","ufg":"Henke, Tobias/Lohweg, Volker (2005): A Simplified Scheme For Hardware-Based Pattern Recognition, in: IEEE International Conference On Image Processing (ICIP), Proceedings, Genova, S. 349–352.","havard":"T. Henke, V. Lohweg, A Simplified Scheme For Hardware-Based Pattern Recognition, in: IEEE International Conference On Image Processing (ICIP), Proceedings, IEEE, Genova, 2005: pp. 349–352.","bjps":"Henke T and Lohweg V (2005) A Simplified Scheme For Hardware-Based Pattern Recognition. IEEE International Conference On Image Processing (ICIP), Proceedings. Genova: IEEE, pp. 349–352.","mla":"Henke, Tobias, and Volker Lohweg. “A Simplified Scheme For Hardware-Based Pattern Recognition.” IEEE International Conference On Image Processing (ICIP), Proceedings, IEEE, 2005, pp. 349–52, doi: 10.1109/ICIP.2005.1529759.","van":"Henke T, Lohweg V. A Simplified Scheme For Hardware-Based Pattern Recognition. In: IEEE International Conference On Image Processing (ICIP), Proceedings. Genova: IEEE; 2005. p. 349–52.","chicago":"Henke, Tobias, and Volker Lohweg. “A Simplified Scheme For Hardware-Based Pattern Recognition.” In IEEE International Conference On Image Processing (ICIP), Proceedings, 349–52. Genova: IEEE, 2005. https://doi.org/ 10.1109/ICIP.2005.1529759.","apa":"Henke, T., & Lohweg, V. (2005). A Simplified Scheme For Hardware-Based Pattern Recognition. In IEEE International Conference On Image Processing (ICIP), Proceedings (pp. 349–352). Genova: IEEE. https://doi.org/ 10.1109/ICIP.2005.1529759","ama":"Henke T, Lohweg V. A Simplified Scheme For Hardware-Based Pattern Recognition. In: IEEE International Conference On Image Processing (ICIP), Proceedings. Genova: IEEE; 2005:349-352. doi: 10.1109/ICIP.2005.1529759","ieee":"T. Henke and V. Lohweg, “A Simplified Scheme For Hardware-Based Pattern Recognition,” in IEEE International Conference On Image Processing (ICIP), Proceedings, 2005, pp. 349–352."},"title":"A Simplified Scheme For Hardware-Based Pattern Recognition","status":"public","page":"349 - 352","main_file_link":[{"url":"https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=1529759"}],"author":[{"first_name":"Tobias","last_name":"Henke","full_name":"Henke, Tobias"},{"full_name":"Lohweg, Volker","last_name":"Lohweg","id":"1804","first_name":"Volker","orcid":"0000-0002-3325-7887"}],"year":2005},{"publication_identifier":{"issn":["0018-9162 "],"eissn":["1558-0814 "]},"publication":"Computer : innovative technology for computer professionals ","date_created":"2021-02-02T10:09:09Z","date_updated":"2023-03-15T13:49:56Z","oa":"1","keyword":["Personal digital assistants","Refrigeration","Portable computers","Control systems","Roads","Availability","Cellular phones","Communications technology","Humans","Smart homes"],"language":[{"iso":"eng"}],"title":"Designing Smart Artifacts for Smart Environments","extern":"1","citation":{"chicago-de":"Streitz, Norbert, Carsten Röcker, Thorsten Prante, Daniel van Alphen, Richard Stenzel und Carsten Magerkurth. 2005. Designing Smart Artifacts for Smart Environments. Computer : innovative technology for computer professionals 38, Nr. 3: 41 – 49. doi:10.1109/MC.2005.92, .","din1505-2-1":"Streitz, Norbert ; Röcker, Carsten ; Prante, Thorsten ; van Alphen, Daniel ; Stenzel, Richard ; Magerkurth, Carsten: Designing Smart Artifacts for Smart Environments. In: Computer : innovative technology for computer professionals Bd. 38. Piscataway, NJ, IEEE (2005), Nr. 3, S. 41 – 49","short":"N. Streitz, C. Röcker, T. Prante, D. van Alphen, R. Stenzel, C. Magerkurth, Computer : Innovative Technology for Computer Professionals 38 (2005) 41 – 49.","havard":"N. Streitz, C. Röcker, T. Prante, D. van Alphen, R. Stenzel, C. Magerkurth, Designing Smart Artifacts for Smart Environments, Computer : Innovative Technology for Computer Professionals . 38 (2005) 41 – 49.","bjps":"Streitz N et al. (2005) Designing Smart Artifacts for Smart Environments. Computer : innovative technology for computer professionals 38, 41 – 49.","mla":"Streitz, Norbert, et al. “Designing Smart Artifacts for Smart Environments.” Computer : Innovative Technology for Computer Professionals , vol. 38, no. 3, IEEE, 2005, pp. 41 – 49, doi:10.1109/MC.2005.92.","ufg":"Streitz, Norbert et. al. (2005): Designing Smart Artifacts for Smart Environments, in: Computer : innovative technology for computer professionals 38 (3), S. 41 – 49.","van":"Streitz N, Röcker C, Prante T, van Alphen D, Stenzel R, Magerkurth C. Designing Smart Artifacts for Smart Environments. Computer : innovative technology for computer professionals . 2005;38(3):41 – 49.","chicago":"Streitz, Norbert, Carsten Röcker, Thorsten Prante, Daniel van Alphen, Richard Stenzel, and Carsten Magerkurth. “Designing Smart Artifacts for Smart Environments.” Computer : Innovative Technology for Computer Professionals 38, no. 3 (2005): 41 – 49. https://doi.org/10.1109/MC.2005.92.","apa":"Streitz, N., Röcker, C., Prante, T., van Alphen, D., Stenzel, R., & Magerkurth, C. (2005). Designing Smart Artifacts for Smart Environments. Computer : Innovative Technology for Computer Professionals , 38(3), 41 – 49. https://doi.org/10.1109/MC.2005.92","ama":"Streitz N, Röcker C, Prante T, van Alphen D, Stenzel R, Magerkurth C. Designing Smart Artifacts for Smart Environments. Computer : innovative technology for computer professionals . 2005;38(3):41 – 49. doi:10.1109/MC.2005.92","ieee":"N. Streitz, C. Röcker, T. Prante, D. van Alphen, R. Stenzel, and C. Magerkurth, “Designing Smart Artifacts for Smart Environments,” Computer : innovative technology for computer professionals , vol. 38, no. 3, pp. 41 – 49, 2005."},"volume":38,"year":2005,"main_file_link":[{"open_access":"1"}],"author":[{"first_name":"Norbert","last_name":"Streitz","full_name":"Streitz, Norbert"},{"full_name":"Röcker, Carsten","id":"61525","first_name":"Carsten","last_name":"Röcker"},{"first_name":"Thorsten","full_name":"Prante, Thorsten","last_name":"Prante"},{"full_name":"van Alphen, Daniel","first_name":"Daniel","last_name":"van Alphen"},{"first_name":"Richard","last_name":"Stenzel","full_name":"Stenzel, Richard"},{"last_name":"Magerkurth","full_name":"Magerkurth, Carsten","first_name":"Carsten"}],"status":"public","page":"41 – 49","type":"journal_article","intvolume":" 38","user_id":"15514","_id":"4824","doi":"10.1109/MC.2005.92","place":"Piscataway, NJ","publication_status":"published","abstract":[{"lang":"eng","text":"The integration of information, communication, and sensing technologies into our everyday objects has created smart environments. Creating the smart artifacts that constitute these environments requires augmenting their standard functionality to support a new quality of interaction and behavior.A system-oriented, importunate smartness approach creates an environment that gives individual smart artifacts or the environment itself certain self-directed actions based on previously collected information. For example, a space can be smart by having and exploiting knowledge about the persons and artifacts currently situated within its borders.In contrast, a people-oriented, empowering smartness approach places the empowering function in the foreground by assuming that smart spaces make people smarter. This approach empowers users to make decisions and take actions as mature and responsible people.Although in some cases it might be more efficient if the system doesnýt ask for a userýs feedback and confirmation at every step in an action chain, the overall design rationale should aim to keep the user in the loop and in control whenever possible."}],"issue":"3","department":[{"_id":"DEP5023"}],"publisher":"IEEE"}]