---
_id: '12032'
abstract:
- lang: eng
text: As DC grids become more widespread in industry, the demand for DC industry-compliant
power supplies is increasing. This paper describes the design and analysis of
a SiC-based Active-Front-End with a switching frequency of 100 kHz and an output
power of 50 kW. The focus of this Active-Front-End is on the small input inductance
(uk=0,6%), which has been deliberately reduced in order to reduce package size.
For a small inductance a high switching frequency and a fast and precise current
measurement are basic requirements. The increase of the switching frequency reduces
the size of the whole filter.
author:
- first_name: Raphael
full_name: Otte, Raphael
id: '51830'
last_name: Otte
- first_name: Jan-Niklas
full_name: Koch, Jan-Niklas
id: '58889'
last_name: Koch
- first_name: Holger
full_name: Borcherding, Holger
id: '1693'
last_name: Borcherding
- first_name: Tim
full_name: Stuckmann, Tim
id: '64800'
last_name: Stuckmann
citation:
ama: Otte R, Koch JN, Borcherding H, Stuckmann T. Design and Analysis of a 50kW
SiC-Based Active-Front-End with a Very Small Line Choke for DC-Grids. (Mesago
Messe Frankfurt GmbH , ed.). VDE Verlag; 2024:3402.
apa: 'Otte, R., Koch, J.-N., Borcherding, H., & Stuckmann, T. (2024). Design
and Analysis of a 50kW SiC-based Active-Front-End with a very small line choke
for DC-Grids. In Mesago Messe Frankfurt GmbH (Ed.), PCIM Europe : International
Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable
Energy and Energy Management, 11-13 June 2024, Nuremberg (p. 3402). VDE Verlag.'
bjps: 'Otte R et al. (2024) Design and Analysis of a 50kW SiC-Based
Active-Front-End with a Very Small Line Choke for DC-Grids, Mesago Messe Frankfurt
GmbH (ed.). Berlin: VDE Verlag.'
chicago: 'Otte, Raphael, Jan-Niklas Koch, Holger Borcherding, and Tim Stuckmann.
Design and Analysis of a 50kW SiC-Based Active-Front-End with a Very Small
Line Choke for DC-Grids. Edited by Mesago Messe Frankfurt GmbH . PCIM Europe :
International Exhibition and Conference for Power Electronics, Intelligent Motion,
Renewable Energy and Energy Management, 11-13 June 2024, Nuremberg. Berlin:
VDE Verlag, 2024.'
chicago-de: 'Otte, Raphael, Jan-Niklas Koch, Holger Borcherding und Tim Stuckmann.
2024. Design and Analysis of a 50kW SiC-based Active-Front-End with a very
small line choke for DC-Grids. Hg. von Mesago Messe Frankfurt GmbH . PCIM
Europe : International Exhibition and Conference for Power Electronics, Intelligent
Motion, Renewable Energy and Energy Management, 11-13 June 2024, Nuremberg.
Berlin: VDE Verlag.'
din1505-2-1: 'Otte, Raphael ; Koch, Jan-Niklas ; Borcherding,
Holger ; Stuckmann, Tim ;
Mesago Messe Frankfurt GmbH (Hrsg.):
Design and Analysis of a 50kW SiC-based Active-Front-End with a very small
line choke for DC-Grids. Berlin : VDE Verlag, 2024'
havard: R. Otte, J.-N. Koch, H. Borcherding, T. Stuckmann, Design and Analysis of
a 50kW SiC-based Active-Front-End with a very small line choke for DC-Grids, VDE
Verlag, Berlin, 2024.
ieee: 'R. Otte, J.-N. Koch, H. Borcherding, and T. Stuckmann, Design and Analysis
of a 50kW SiC-based Active-Front-End with a very small line choke for DC-Grids.
Berlin: VDE Verlag, 2024, p. 3402.'
mla: 'Otte, Raphael, et al. “Design and Analysis of a 50kW SiC-Based Active-Front-End
with a Very Small Line Choke for DC-Grids.” PCIM Europe : International Exhibition
and Conference for Power Electronics, Intelligent Motion, Renewable Energy and
Energy Management, 11-13 June 2024, Nuremberg, edited by Mesago Messe Frankfurt
GmbH , VDE Verlag, 2024, p. 3402.'
short: R. Otte, J.-N. Koch, H. Borcherding, T. Stuckmann, Design and Analysis of
a 50kW SiC-Based Active-Front-End with a Very Small Line Choke for DC-Grids, VDE
Verlag, Berlin, 2024.
ufg: 'Otte, Raphael u. a.: Design and Analysis of a 50kW SiC-based Active-Front-End
with a very small line choke for DC-Grids, hg. von Mesago Messe Frankfurt GmbH
, Berlin 2024.'
van: 'Otte R, Koch JN, Borcherding H, Stuckmann T. Design and Analysis of a 50kW
SiC-based Active-Front-End with a very small line choke for DC-Grids. Mesago Messe
Frankfurt GmbH , editor. PCIM Europe : International Exhibition and Conference
for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management,
11-13 June 2024, Nuremberg. Berlin: VDE Verlag; 2024.'
conference:
end_date: 2024-06-13
location: Nürnberg
name: PCIM Europe 2024
start_date: 2024-06-11
corporate_editor:
- 'Mesago Messe Frankfurt GmbH '
date_created: 2024-11-11T14:18:44Z
date_updated: 2024-11-14T13:25:03Z
ddc:
- '600'
department:
- _id: DEP6020
has_accepted_license: '1'
keyword:
- DC-Industry
- DC-Grids
- AIC
- AFE
- Active-Infeed-Converter
- Active-Front-End
language:
- iso: eng
main_file_link:
- url: https://www.vde-verlag.de/buecher/566262/pcim-europe-2024.html
page: '3402'
place: Berlin
publication: 'PCIM Europe : International Exhibition and Conference for Power Electronics,
Intelligent Motion, Renewable Energy and Energy Management, 11-13 June 2024, Nuremberg'
publication_identifier:
isbn:
- 978-3-8007-6262-0
publication_status: published
publisher: VDE Verlag
related_material:
link:
- relation: contains
url: https://www.vde-verlag.de/buecher/566262/pcim-europe-2024.html
record:
- id: '12032'
relation: earlier_version
status: public
status: public
title: Design and Analysis of a 50kW SiC-based Active-Front-End with a very small
line choke for DC-Grids
type: conference_editor_article
user_id: '83781'
year: '2024'
...
---
_id: '12389'
abstract:
- lang: ger
text: "Ressourcenverbrauch, CO2-Fußabdruck und Abfallaufkommen sind zentrale Themen
bei der nachhaltigen Entwicklung der Bauwirtschaft. Besonders mit einem Gebäudeabbruch
geht ein enormer Ressourcen- und Energieverlust einher. Diese Arbeit fokussiert
den Abbruchprozess am Beispiel einer öffentlichen Verwaltung und analysiert die
Möglichkeiten dieser, Kreisläufe von Bauteilen und -materialien in der lokalen
Bauwirtschaft zu fördern. \r\nZunächst wurde der IST-Prozess für einen Abbruch
von Gebäuden am Beispiel des Kreis Lippe aufgenommen und Schwachstellen für die
Wiedereinbringung von Bauteilen und -materialien identifiziert. Danach wurden
Best Practice Ansätze von öffentlichen Verwaltungen in Deutschland recherchiert
und anschließend dies um den europäischen Raum erweitert. Der letzte Teil der
Analyse bezieht sich auf das RE-BUILD-OWL Projekt, mit welchem der Kreis Lippe
plante eine Vorreiterrolle in zirkulärem Bauen einzunehmen, und wie die Projektergebnisse
die Wiedereinbringung von Bauteilen und -materialien im Rückbauprozess positiv
beeinflussen können. \r\nEs hat sich gezeigt, dass sich die Best Practice und
die Projektergebnisse positiv auf die Schwachstellen des Abbruchprozesses auswirken
können. Konkret wurden für den Kreis Lippe vier Handlungsempfehlungen formuliert.
1. Wissensaufbau: Zwar wurde deutlich, dass bei Einzelpersonen großes Fachwissen
beseht, ein Austausch zwischen den Mitarbeitenden bestand jedoch nicht ausreichend.
Außerdem besteht auch Bedarf an externen Schulungen geschult/ Sensibilisierung.
2. Digitalisierungsstrategie: Langfristig deutet sich im Bausektor ein Wandel
zur Nutzung von Building Information Modeling ab. Es wird empfohlen, diesen Wandel
im Kreis Lippe vorzubereiten, um die Mitarbeitenden in dem Wandel mitzunehmen
und diese Veränderung proaktiv anzugehen. 3. Aktive lokale Marktgestaltung: Der
lokale Markt lässt sich durch die Erhöhung der Nachfrage von verfügbaren Sekundärmaterialien
und der Erhöhung des Angebotes von verfügbaren Sekundärmaterialien beeinflussen.
Wenn zusätzlich innovative Technologien in der Region gefördert werden, lassen
sich langfristig Materialkreisläufe entwickeln. 4. Baustoff- und Materialdistribution:
Diese Handlungsempfehlung gilt als Teil der Erhöhung des Sekundärmaterialangebots.
Um die Angebotserhöhung der Sekundärbauteile und -materialien zu bewerkstelligen,
wurden zwei Optionen vorgeschlagen. Zum einen kann die Fremdleistung der Identifizierung
und Distribution eingekauft werden, zum anderen ist eine interne Umsetzung mit
Aufbau einer Bauteil- und Materialbörse möglich. Wichtig ist in beiden Schritten,
dass vor einem Abbruch ein Audit des Gebäudes und eine Klassifizierung der Bauteile
und -materialien auf Wiederverwendbarkeit durchgeführt wird. Eine mögliche Umsetzung
der Veränderungen wurden in einer beispielhaften SOLL-Prozess-Darstellung skizziert.
\r\nDie Ergebnisse dieser Arbeit zeigen das Potenzial sowie konkrete Schritte
auf, die der Kreis Lippe hat, um Bauteile und -materialien in einem Kreislauf
zu behalten. Die Best Practice Analyse ist nicht spezifisch für den Kreis Lippe
durchgeführt worden, weshalb die Ergebnisse zusätzlich für einen allgemein übertragbaren
Erkenntnisgewinn zur Verfügung stehen. Auch andere öffentliche Verwaltungen können
anhand der Ergebnisse dieser Arbeit Handlungsschritte ableiten. "
- lang: eng
text: "Resource consumption, carbon footprint and waste generation are key issues
in the sustainable development of the construction industry. Demolition of buildings
in particular is associated with an enormous loss of resources and energy. This
thesis deals with the role of public administrations, in particular with their
demolition process, and analyzes the possibilities of these to promote circular
economy of building components and materials in the local construction industry.\r\nFirst,
the actual process for demolishing buildings was recorded using the example of
the Kreis Lippe and weak points for the reuse of components and materials were
identified. This was followed by research into best practice in public administration
in Germany and then in Europe. Finally, the last part of the analysis refers to
RE-BUILD-OWL, a project with which the Kreis Lippe planned to take a pioneering
role in circular construction, and how the project results can positively influence
the reuse of components and materials in the deconstruction process.\r\nIt was
determined that best practice and the project results can have a positive impact
on the weak points. Specifically, four recommendations for action were formulated
for the Kreis Lippe. 1. building knowledge: Although it became clear that individuals
have a great deal of specialist knowledge, there was not enough exchange between
the employees. In addition, external training should be provided as well. 2. digitalization
strategy: In the long term, there are signs of a shift towards the use of Building
Information Modeling in the construction sector. This change should be prepared
in the Kreis Lippe in order to take employees along with the change and proactively
tackle this change. 3. active local market design: The local market can be influenced
by increasing the demand for available secondary materials and by increasing the
supply of available secondary materials. If innovative technologies are also promoted
in the region, material cycles can be developed in the long term. 4. construction
components and material distribution: This recommendation for action is part of
increasing the supply of secondary materials. There are two options for increasing
the supply of secondary components and materials. On the one hand, the external
service of identification and distribution can be purchased; on the other hand,
internal implementation with the establishment of a component and material exchange
is possible. In both cases, it is important that an audit of the building and
a classification of the components and materials for reusability is carried out
before demolition. A possible implementation of the changes was outlined in an
exemplary target process diagram.\r\nThe results of this work show the potential
and concrete steps that the Kreis Lippe has, to keep components and materials
in a cycle. The best practice analysis was not carried out specifically for the
Kreis Lippe, which is why the results are also available for a generally transferable
gain in knowledge. Other public administrations can also derive action steps from
the results of this work."
author:
- first_name: Anika
full_name: Steinkuhl, Anika
id: '87756'
last_name: Steinkuhl
orcid: 0009-0008-6759-6394
citation:
ama: Steinkuhl A. Entwicklung strategischer Handlungsempfehlungen für die Förderung
der Kreislaufwirtschaft beim Rückbau öffentlicher Gebäude. Hochschule Bielefeld
doi:10.25644/rs7s-yc91
apa: Steinkuhl, A. (n.d.). Entwicklung strategischer Handlungsempfehlungen für
die Förderung der Kreislaufwirtschaft beim Rückbau öffentlicher Gebäude. Hochschule
Bielefeld. https://doi.org/10.25644/rs7s-yc91
bjps: 'Steinkuhl A (n.d.) Entwicklung strategischer Handlungsempfehlungen
für die Förderung der Kreislaufwirtschaft beim Rückbau öffentlicher Gebäude.
Bielefeld: Hochschule Bielefeld.'
chicago: 'Steinkuhl, Anika. Entwicklung strategischer Handlungsempfehlungen für
die Förderung der Kreislaufwirtschaft beim Rückbau öffentlicher Gebäude. Bielefeld:
Hochschule Bielefeld, n.d. https://doi.org/10.25644/rs7s-yc91.'
chicago-de: 'Steinkuhl, Anika. Entwicklung strategischer Handlungsempfehlungen
für die Förderung der Kreislaufwirtschaft beim Rückbau öffentlicher Gebäude.
Bielefeld: Hochschule Bielefeld. doi:10.25644/rs7s-yc91,
.'
din1505-2-1: 'Steinkuhl, Anika: Entwicklung
strategischer Handlungsempfehlungen für die Förderung der Kreislaufwirtschaft
beim Rückbau öffentlicher Gebäude. Bielefeld : Hochschule Bielefeld'
havard: A. Steinkuhl, Entwicklung strategischer Handlungsempfehlungen für die Förderung
der Kreislaufwirtschaft beim Rückbau öffentlicher Gebäude, Hochschule Bielefeld,
Bielefeld, n.d.
ieee: 'A. Steinkuhl, Entwicklung strategischer Handlungsempfehlungen für die
Förderung der Kreislaufwirtschaft beim Rückbau öffentlicher Gebäude. Bielefeld:
Hochschule Bielefeld. doi: 10.25644/rs7s-yc91.'
mla: Steinkuhl, Anika. Entwicklung strategischer Handlungsempfehlungen für die
Förderung der Kreislaufwirtschaft beim Rückbau öffentlicher Gebäude. Hochschule
Bielefeld, https://doi.org/10.25644/rs7s-yc91.
short: A. Steinkuhl, Entwicklung strategischer Handlungsempfehlungen für die Förderung
der Kreislaufwirtschaft beim Rückbau öffentlicher Gebäude, Hochschule Bielefeld,
Bielefeld, n.d.
ufg: 'Steinkuhl, Anika: Entwicklung strategischer Handlungsempfehlungen für
die Förderung der Kreislaufwirtschaft beim Rückbau öffentlicher Gebäude, Bielefeld
o. J.'
van: 'Steinkuhl A. Entwicklung strategischer Handlungsempfehlungen für die Förderung
der Kreislaufwirtschaft beim Rückbau öffentlicher Gebäude. Bielefeld: Hochschule
Bielefeld; 80 p.'
date_created: 2025-01-23T15:21:53Z
date_updated: 2025-12-08T14:06:15Z
ddc:
- '000'
department:
- _id: DEP1622
doi: 10.25644/rs7s-yc91
extern: '1'
file:
- access_level: open_access
content_type: application/pdf
creator: ebs-9xz
date_created: 2025-12-08T13:29:50Z
date_updated: 2025-12-08T13:29:50Z
file_id: '13317'
file_name: Steinkuhl_Entwicklung strategischer Handlungsempfehlungen für die Förderung
der Kreislaufwirtschaft beim Rückbau öffentlicher Gebäude.pdf
file_size: 2396087
relation: main_file
success: 1
file_date_updated: 2025-12-08T13:29:50Z
has_accepted_license: '1'
keyword:
- Zirkuläres Bauen
- Kreislaufwirtschaft
- Bauwirtschaft
- Nachhaltiges Bauen
- Materialkreisläufe
- BIM
- Building Information Modeling
- construction industry
- circular economy
- sustainability
- sustainable construction
- circular construction
- material cycles
language:
- iso: ger
oa: '1'
page: '80'
place: Bielefeld
publication_status: accepted
publisher: Hochschule Bielefeld
status: public
supervisor:
- first_name: Hans
full_name: Brandt-Pook, Hans
last_name: Brandt-Pook
- first_name: Peter
full_name: Hartel, Peter
last_name: Hartel
- first_name: Birgit
full_name: Essling, Birgit
last_name: Essling
- first_name: Lisa
full_name: Pusch, Lisa
id: '85026'
last_name: Pusch
orcid: https://orcid.org/0000-0002-9756-9548
title: Entwicklung strategischer Handlungsempfehlungen für die Förderung der Kreislaufwirtschaft
beim Rückbau öffentlicher Gebäude
type: master_thesis
user_id: '83781'
year: '2024'
...
---
_id: '12795'
abstract:
- lang: eng
text: Including disabled workers in value-creating work processes is a fundamental
and guaranteed human right and is, therefore, an essential goal of society. In
Germany, sheltered workshops create the conditions for this inclusion since they
are essential to companies' value chains. A central challenge is the inclusion
of disabled workers in the value-creation processes, such as in manufacturing
or assembly areas. The skills of disabled workers vary since they have individual
impairments. Therefore, this paper presents a digital human model, a Human Digital
Twin (HDT), for disabled workers. The model maps their skills and supports the
production planning and assembly processes. (C) 2024 The Authors. Published by
Elsevier B.V.
author:
- first_name: Viktoria
full_name: Mordaschew, Viktoria
id: '79005'
last_name: Mordaschew
- first_name: Sönke
full_name: Duckwitz, Sönke
id: '81325'
last_name: Duckwitz
- first_name: Sven
full_name: Tackenberg, Sven
id: '71470'
last_name: Tackenberg
citation:
ama: Mordaschew V, Duckwitz S, Tackenberg S. A Human Digital Twin of Disabled
Workers for Production Planning. Vol 232. (Longo F, Shen W, Padovano A, eds.).
Elsevier BV; 2024:745-751. doi:10.1016/j.procs.2024.01.074
apa: Mordaschew, V., Duckwitz, S., & Tackenberg, S. (2024). A Human Digital
Twin of Disabled Workers for Production Planning. In F. Longo, W. Shen, &
A. Padovano (Eds.), 5th International Conference on Industry 4.0 and Smart
Manufacturing (ISM) (Vol. 232, pp. 745–751). Elsevier BV. https://doi.org/10.1016/j.procs.2024.01.074
bjps: 'Mordaschew V, Duckwitz S and Tackenberg S (2024) A Human Digital
Twin of Disabled Workers for Production Planning, Longo F, Shen W and Padovano
A (eds). Amsterdam [u.a.]: Elsevier BV.'
chicago: 'Mordaschew, Viktoria, Sönke Duckwitz, and Sven Tackenberg. A Human
Digital Twin of Disabled Workers for Production Planning. Edited by F. Longo,
W. Shen, and A. Padovano. 5th International Conference on Industry 4.0 and
Smart Manufacturing (ISM). Vol. 232. Procedia Computer Science. Amsterdam
[u.a.]: Elsevier BV, 2024. https://doi.org/10.1016/j.procs.2024.01.074.'
chicago-de: 'Mordaschew, Viktoria, Sönke Duckwitz und Sven Tackenberg. 2024. A
Human Digital Twin of Disabled Workers for Production Planning. Hg. von F.
Longo, W. Shen, und A. Padovano. 5th International Conference on Industry 4.0
and Smart Manufacturing (ISM). Bd. 232. Procedia Computer Science. Amsterdam
[u.a.]: Elsevier BV. doi:10.1016/j.procs.2024.01.074,
.'
din1505-2-1: 'Mordaschew, Viktoria
; Duckwitz, Sönke ; Tackenberg,
Sven ; Longo, F. ; Shen, W. ; Padovano,
A. (Hrsg.): A Human Digital Twin of Disabled Workers for Production
Planning, Procedia Computer Science. Bd. 232. Amsterdam [u.a.] : Elsevier
BV, 2024'
havard: V. Mordaschew, S. Duckwitz, S. Tackenberg, A Human Digital Twin of Disabled
Workers for Production Planning, Elsevier BV, Amsterdam [u.a.], 2024.
ieee: 'V. Mordaschew, S. Duckwitz, and S. Tackenberg, A Human Digital Twin of
Disabled Workers for Production Planning, vol. 232. Amsterdam [u.a.]: Elsevier
BV, 2024, pp. 745–751. doi: 10.1016/j.procs.2024.01.074.'
mla: Mordaschew, Viktoria, et al. “A Human Digital Twin of Disabled Workers for
Production Planning.” 5th International Conference on Industry 4.0 and Smart
Manufacturing (ISM), edited by F. Longo et al., vol. 232, Elsevier BV, 2024,
pp. 745–51, https://doi.org/10.1016/j.procs.2024.01.074.
short: V. Mordaschew, S. Duckwitz, S. Tackenberg, A Human Digital Twin of Disabled
Workers for Production Planning, Elsevier BV, Amsterdam [u.a.], 2024.
ufg: 'Mordaschew, Viktoria/Duckwitz, Sönke/Tackenberg, Sven: A Human Digital
Twin of Disabled Workers for Production Planning, Bd. 232, hg. von Longo, F./Shen,
W./Padovano, A., Amsterdam [u.a.] 2024 (Procedia Computer Science).'
van: 'Mordaschew V, Duckwitz S, Tackenberg S. A Human Digital Twin of Disabled Workers
for Production Planning. Longo F, Shen W, Padovano A, editors. 5th International
Conference on Industry 4.0 and Smart Manufacturing (ISM). Amsterdam [u.a.]: Elsevier
BV; 2024. (Procedia Computer Science; vol. 232).'
conference:
end_date: 2023-11-24
location: Lisbon, PORTUGAL
name: 5th International Conference on Industry 4.0 and Smart Manufacturing (ISM)
start_date: 2023-11-22
date_created: 2025-04-15T12:07:15Z
date_updated: 2025-06-25T12:44:44Z
department:
- _id: DEP7020
doi: 10.1016/j.procs.2024.01.074
editor:
- first_name: F.
full_name: Longo, F.
last_name: Longo
- first_name: W.
full_name: Shen, W.
last_name: Shen
- first_name: A.
full_name: Padovano, A.
last_name: Padovano
intvolume: ' 232'
keyword:
- Human Digital Twin
- Industry 4.0
- Sheltered Workshops
- Production Planning
language:
- iso: eng
page: 745-751
place: Amsterdam [u.a.]
publication: 5th International Conference on Industry 4.0 and Smart Manufacturing
(ISM)
publication_identifier:
issn:
- 1877-0509
publication_status: published
publisher: Elsevier BV
series_title: Procedia Computer Science
status: public
title: A Human Digital Twin of Disabled Workers for Production Planning
type: conference_editor_article
user_id: '83781'
volume: 232
year: '2024'
...
---
_id: '12831'
abstract:
- lang: eng
text: The overall Industry 4.0 developments and the highly dynamic threat landscape
enhance the need for continuous security engineering of industrial components,
modules, and systems. Security risk assessments play a major role to ensure a
secure operation of Industrial Automation and Control Systems (IACSs) but are
mostly neglected due to missing resources and a lack of human experts for the
sophisticated manual tasks. Therefore, a method for information and process modelling
regarding the automation of security risk assessments has been previously designed,
but not yet evaluated. This work in progress begins the evaluation of the automated
security risk assessment concept by investigating the related work and identifying
the main deficits. The results include a requirements analysis for the verification
and an outlook towards future evaluation aspects.
author:
- first_name: Marco
full_name: Ehrlich, Marco
id: '61562'
last_name: Ehrlich
- first_name: Georg
full_name: Lukas, Georg
last_name: Lukas
- first_name: Henning
full_name: Trsek, Henning
id: '1486'
last_name: Trsek
orcid: 0000-0002-0133-0656
- first_name: Jürgen
full_name: Jasperneite, Jürgen
id: '1899'
last_name: Jasperneite
- first_name: Wolfgang
full_name: Kastner, Wolfgang
last_name: Kastner
- first_name: Christian
full_name: Diedrich, Christian
last_name: Diedrich
citation:
ama: Ehrlich M, Lukas G, Trsek H, Jasperneite J, Kastner W, Diedrich C. Requirements
Analysis for the Evaluation of Automated Security Risk Assessments. IEEE;
2024:180-183. doi:10.1109/wfcs60972.2024.10540830
apa: Ehrlich, M., Lukas, G., Trsek, H., Jasperneite, J., Kastner, W., & Diedrich,
C. (2024). Requirements Analysis for the Evaluation of Automated Security Risk
Assessments. In 2024 IEEE 20th International Conference on Factory Communication
Systems (WFCS) (pp. 180–183). IEEE. https://doi.org/10.1109/wfcs60972.2024.10540830
bjps: 'Ehrlich M et al. (2024) Requirements Analysis for the Evaluation
of Automated Security Risk Assessments. [Piscataway, NJ]: IEEE.'
chicago: 'Ehrlich, Marco, Georg Lukas, Henning Trsek, Jürgen Jasperneite, Wolfgang
Kastner, and Christian Diedrich. Requirements Analysis for the Evaluation of
Automated Security Risk Assessments. 2024 IEEE 20th International Conference
on Factory Communication Systems (WFCS). IEEE International Workshop on Factory
Communication Systems. [Piscataway, NJ]: IEEE, 2024. https://doi.org/10.1109/wfcs60972.2024.10540830.'
chicago-de: 'Ehrlich, Marco, Georg Lukas, Henning Trsek, Jürgen Jasperneite, Wolfgang
Kastner und Christian Diedrich. 2024. Requirements Analysis for the Evaluation
of Automated Security Risk Assessments. 2024 IEEE 20th International Conference
on Factory Communication Systems (WFCS). IEEE International Workshop on Factory
Communication Systems. [Piscataway, NJ]: IEEE. doi:10.1109/wfcs60972.2024.10540830,
.'
din1505-2-1: 'Ehrlich, Marco ; Lukas, Georg ; Trsek,
Henning ; Jasperneite, Jürgen
; Kastner, Wolfgang ; Diedrich,
Christian: Requirements Analysis for the Evaluation of Automated Security
Risk Assessments, IEEE International Workshop on Factory Communication
Systems. [Piscataway, NJ] : IEEE, 2024'
havard: M. Ehrlich, G. Lukas, H. Trsek, J. Jasperneite, W. Kastner, C. Diedrich,
Requirements Analysis for the Evaluation of Automated Security Risk Assessments,
IEEE, [Piscataway, NJ], 2024.
ieee: 'M. Ehrlich, G. Lukas, H. Trsek, J. Jasperneite, W. Kastner, and C. Diedrich,
Requirements Analysis for the Evaluation of Automated Security Risk Assessments.
[Piscataway, NJ]: IEEE, 2024, pp. 180–183. doi: 10.1109/wfcs60972.2024.10540830.'
mla: Ehrlich, Marco, et al. “Requirements Analysis for the Evaluation of Automated
Security Risk Assessments.” 2024 IEEE 20th International Conference on Factory
Communication Systems (WFCS), IEEE, 2024, pp. 180–83, https://doi.org/10.1109/wfcs60972.2024.10540830.
short: M. Ehrlich, G. Lukas, H. Trsek, J. Jasperneite, W. Kastner, C. Diedrich,
Requirements Analysis for the Evaluation of Automated Security Risk Assessments,
IEEE, [Piscataway, NJ], 2024.
ufg: 'Ehrlich, Marco u. a.: Requirements Analysis for the Evaluation of Automated
Security Risk Assessments, [Piscataway, NJ] 2024 (IEEE International Workshop
on Factory Communication Systems).'
van: 'Ehrlich M, Lukas G, Trsek H, Jasperneite J, Kastner W, Diedrich C. Requirements
Analysis for the Evaluation of Automated Security Risk Assessments. 2024 IEEE
20th International Conference on Factory Communication Systems (WFCS). [Piscataway,
NJ]: IEEE; 2024. (IEEE International Workshop on Factory Communication Systems).'
conference:
end_date: 2024-04-19
location: Toulouse, FRANCE
name: 20th International Conference on Factory Communication Systems (WFCS)
start_date: 2024-04-17
date_created: 2025-04-23T07:50:00Z
date_updated: 2025-06-25T12:59:44Z
department:
- _id: DEP5023
doi: 10.1109/wfcs60972.2024.10540830
keyword:
- Industry 4.0
- Security
- Risk Assessment
- Automation
- Requirements
- Evaluation
- Verification
language:
- iso: eng
page: 180-183
place: '[Piscataway, NJ]'
publication: 2024 IEEE 20th International Conference on Factory Communication Systems
(WFCS)
publication_identifier:
eisbn:
- 979-8-3503-1934-7
isbn:
- 979-8-3503-1935-4
- 979-8-3503-1933-0
issn:
- 2835-8511
publication_status: published
publisher: IEEE
series_title: IEEE International Workshop on Factory Communication Systems
status: public
title: Requirements Analysis for the Evaluation of Automated Security Risk Assessments
type: conference_editor_article
user_id: '83781'
year: '2024'
...
---
_id: '13019'
abstract:
- lang: eng
text: The digital transformation of manufacturing companies is a huge driver of
complexity in organizational structures and processes. Challenges such as an increasing
number of variants, rapid changes in technology, and a multitude of interfaces
between IT systems within companies require changed qualifications in the workforce.
Employees lack a profound understanding of the added value that digitalization
can bring to the company and themselves. To address these challenges, simulation
games are a suitable approach. Simulation games are active learning methods that
simulate real systems in an artificial environment. The goal is to give employees
the opportunity to gain experience and make decisions without creating a pressure
situation or endangering the real production system. This enables them to better
understand, evaluate and design real systems. In order to make optimal use of
simulation games in manufacturing companies, they should be customized to the
company and its employees due to individual processes and structures. This paper
presents a procedure model for designing a concept of individualized simulation
games for manufacturing companies in the context of digitalization. It starts
with the identification of requirements. Subsequently, the requirements of the
individual elements are combined into a holistic simulation game. The piloting
of the framework is presented using an example from industrial practice.
author:
- first_name: Fabian
full_name: Machon, Fabian
last_name: Machon
- first_name: Stefan
full_name: Gabriel, Stefan
last_name: Gabriel
- first_name: Benedikt
full_name: Latos, Benedikt
id: '84474'
last_name: Latos
- first_name: Christoph
full_name: Holtkötter, Christoph
last_name: Holtkötter
- first_name: Ben
full_name: Lütkehoff, Ben
last_name: Lütkehoff
- first_name: Laban
full_name: Asmar, Laban
last_name: Asmar
- first_name: Dr. Arno
full_name: Kühn, Dr. Arno
last_name: Kühn
- first_name: Prof. Dr. Roman
full_name: Dumitrescu, Prof. Dr. Roman
last_name: Dumitrescu
citation:
ama: Machon F, Gabriel S, Latos B, et al. Design of individual simulation games
in manufacturing companies for game-based learning. Procedia CIRP. 2023;119:1017-1022.
doi:10.1016/j.procir.2023.03.145
apa: Machon, F., Gabriel, S., Latos, B., Holtkötter, C., Lütkehoff, B., Asmar, L.,
Kühn, Dr. A., & Dumitrescu, Prof. Dr. R. (2023). Design of individual simulation
games in manufacturing companies for game-based learning. Procedia CIRP,
119, 1017–1022. https://doi.org/10.1016/j.procir.2023.03.145
bjps: Machon F et al. (2023) Design of Individual Simulation Games
in Manufacturing Companies for Game-Based Learning. Procedia CIRP 119,
1017–1022.
chicago: 'Machon, Fabian, Stefan Gabriel, Benedikt Latos, Christoph Holtkötter,
Ben Lütkehoff, Laban Asmar, Dr. Arno Kühn, and Prof. Dr. Roman Dumitrescu. “Design
of Individual Simulation Games in Manufacturing Companies for Game-Based Learning.”
Procedia CIRP 119 (2023): 1017–22. https://doi.org/10.1016/j.procir.2023.03.145.'
chicago-de: 'Machon, Fabian, Stefan Gabriel, Benedikt Latos, Christoph Holtkötter,
Ben Lütkehoff, Laban Asmar, Dr. Arno Kühn und Prof. Dr. Roman Dumitrescu. 2023.
Design of individual simulation games in manufacturing companies for game-based
learning. Procedia CIRP 119: 1017–1022. doi:10.1016/j.procir.2023.03.145,
.'
din1505-2-1: 'Machon, Fabian ; Gabriel, Stefan ; Latos,
Benedikt ; Holtkötter, Christoph
; Lütkehoff, Ben ; Asmar,
Laban ; Kühn, Dr. Arno ;
Dumitrescu, Prof. Dr. Roman: Design
of individual simulation games in manufacturing companies for game-based learning.
In: Procedia CIRP Bd. 119. Amsterdam [u.a.], Elsevier BV (2023), S. 1017–1022'
havard: F. Machon, S. Gabriel, B. Latos, C. Holtkötter, B. Lütkehoff, L. Asmar,
Dr.A. Kühn, Prof.Dr.R. Dumitrescu, Design of individual simulation games in manufacturing
companies for game-based learning, Procedia CIRP. 119 (2023) 1017–1022.
ieee: 'F. Machon et al., “Design of individual simulation games in manufacturing
companies for game-based learning,” Procedia CIRP, vol. 119, pp. 1017–1022,
2023, doi: 10.1016/j.procir.2023.03.145.'
mla: Machon, Fabian, et al. “Design of Individual Simulation Games in Manufacturing
Companies for Game-Based Learning.” Procedia CIRP, vol. 119, 2023, pp.
1017–22, https://doi.org/10.1016/j.procir.2023.03.145.
short: F. Machon, S. Gabriel, B. Latos, C. Holtkötter, B. Lütkehoff, L. Asmar, Dr.A.
Kühn, Prof.Dr.R. Dumitrescu, Procedia CIRP 119 (2023) 1017–1022.
ufg: 'Machon, Fabian u. a.: Design of individual simulation games in manufacturing
companies for game-based learning, in: Procedia CIRP 119 (2023), S. 1017–1022.'
van: Machon F, Gabriel S, Latos B, Holtkötter C, Lütkehoff B, Asmar L, et al. Design
of individual simulation games in manufacturing companies for game-based learning.
Procedia CIRP. 2023;119:1017–22.
date_created: 2025-06-24T13:42:09Z
date_updated: 2025-06-24T13:45:56Z
department:
- _id: DEP1500
doi: 10.1016/j.procir.2023.03.145
intvolume: ' 119'
keyword:
- industry 4.0
- digitalization
- digital transformation
- simulation games
- game-based learning
- education
- employee education
- qualification
language:
- iso: eng
page: 1017-1022
place: Amsterdam [u.a.]
publication: Procedia CIRP
publication_identifier:
issn:
- 2212-8271
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Design of individual simulation games in manufacturing companies for game-based
learning
type: scientific_journal_article
user_id: '83781'
volume: 119
year: '2023'
...
---
_id: '7147'
abstract:
- lang: eng
text: "Purpose: Industry 4.0 technologies influence how production is planned, scheduled,
and controlled. In literature, different classifications of the tasks and functions
of production planning and control (PPC) exist, of which one is the German Aachen
PPC model. This research aims to identify and classify current Industry 4.0 approaches
for planning and controlling production processes and to reveal researched and
unexplored areas of the model.\r\n\r\nDesign/methodology/approach: In an exploratory
literature review, we review and classify 48 publications on a full-text basis
with the Aachen PPC model's tasks and functions. Two cluster analyses reveal researched
and unexplored tasks and functions of the Aachen PPC model. Additionally, we give
a summary of each reviewed publication.\r\n\r\nFindings: We propose a cyber-physical
PPC architecture, which incorporates current Industry 4.0 technologies, current
optimization methods, optimization objectives, and disturbances relevant for realizing
a PPC system in a smart factory. Current approaches focus on the in-house PPC,
particularly on the control using real-time information from the shop floor. We
propose future research directions for the unexplored tasks and functions of the
Aachen PPC model.\r\n\r\nResearch limitations/implications: The selection of search
terms and the texts' interpretation is based on an individual assessment. The
revelation of unexplored tasks and functions of the Aachen PPC model might have
a different outcome if the search term combination is parameterized differently.\r\n\r\nOriginality/value:
Using the Aachen PPC model, which holistically models PPC, the findings give comprehensive
insights into the current advances of tools, methods, and challenges relevant
to planning and controlling production processes under Industry 4.0."
article_number: 4-30
author:
- first_name: Jan-Phillip
full_name: Herrmann, Jan-Phillip
id: '75846'
last_name: Herrmann
- first_name: Sven
full_name: Tackenberg, Sven
id: '71470'
last_name: Tackenberg
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Thilo
full_name: Gamber, Thilo
id: '71451'
last_name: Gamber
citation:
ama: 'Herrmann JP, Tackenberg S, Padoano E, Gamber T. Approaches of production planning
and control under industry 4.0: A literature review. Journal of Industrial
Engineering and Management. 2022;15(1). doi:http://dx.doi.org/10.3926/jiem.3582'
apa: 'Herrmann, J.-P., Tackenberg, S., Padoano, E., & Gamber, T. (2022). Approaches
of production planning and control under industry 4.0: A literature review. Journal
of Industrial Engineering and Management, 15(1), Article 4–30. http://dx.doi.org/10.3926/jiem.3582'
bjps: 'Herrmann J-P et al. (2022) Approaches of Production Planning
and Control under Industry 4.0: A Literature Review. Journal of Industrial
Engineering and Management 15.'
chicago: 'Herrmann, Jan-Phillip, Sven Tackenberg, Elio Padoano, and Thilo Gamber.
“Approaches of Production Planning and Control under Industry 4.0: A Literature
Review.” Journal of Industrial Engineering and Management 15, no. 1 (2022).
http://dx.doi.org/10.3926/jiem.3582.'
chicago-de: 'Herrmann, Jan-Phillip, Sven Tackenberg, Elio Padoano und Thilo Gamber.
2022. Approaches of production planning and control under industry 4.0: A literature
review. Journal of Industrial Engineering and Management 15, Nr. 1. doi:http://dx.doi.org/10.3926/jiem.3582,
.'
din1505-2-1: 'Herrmann, Jan-Phillip
; Tackenberg, Sven ; Padoano,
Elio ; Gamber, Thilo: Approaches
of production planning and control under industry 4.0: A literature review. In:
Journal of Industrial Engineering and Management Bd. 15. Barcelona, OmniaScience
(2022), Nr. 1'
havard: 'J.-P. Herrmann, S. Tackenberg, E. Padoano, T. Gamber, Approaches of production
planning and control under industry 4.0: A literature review, Journal of Industrial
Engineering and Management. 15 (2022).'
ieee: 'J.-P. Herrmann, S. Tackenberg, E. Padoano, and T. Gamber, “Approaches of
production planning and control under industry 4.0: A literature review,” Journal
of Industrial Engineering and Management, vol. 15, no. 1, Art. no. 4–30, 2022,
doi: http://dx.doi.org/10.3926/jiem.3582.'
mla: 'Herrmann, Jan-Phillip, et al. “Approaches of Production Planning and Control
under Industry 4.0: A Literature Review.” Journal of Industrial Engineering
and Management, vol. 15, no. 1, 4–30, 2022, http://dx.doi.org/10.3926/jiem.3582.'
short: J.-P. Herrmann, S. Tackenberg, E. Padoano, T. Gamber, Journal of Industrial
Engineering and Management 15 (2022).
ufg: 'Herrmann, Jan-Phillip u. a.: Approaches of production planning and
control under industry 4.0: A literature review, in: Journal of Industrial
Engineering and Management 15 (2022), H. 1.'
van: 'Herrmann JP, Tackenberg S, Padoano E, Gamber T. Approaches of production planning
and control under industry 4.0: A literature review. Journal of Industrial Engineering
and Management. 2022;15(1).'
date_created: 2022-03-22T10:01:45Z
date_updated: 2024-08-05T08:46:11Z
department:
- _id: DEP7020
- _id: DEP1305
doi: http://dx.doi.org/10.3926/jiem.3582
intvolume: ' 15'
issue: '1'
keyword:
- Production planning and control
- Industry 4.0
- Industrial Internet of Things
- Exploratory literature review
language:
- iso: eng
main_file_link:
- open_access: '1'
url: http://www.jiem.org/index.php/jiem/article/view/3582/996
oa: '1'
place: Barcelona
publication: Journal of Industrial Engineering and Management
publication_identifier:
eissn:
- 2013-0953
issn:
- 2013-8423
publication_status: published
publisher: ' OmniaScience'
quality_controlled: '1'
status: public
title: 'Approaches of production planning and control under industry 4.0: A literature
review'
type: scientific_journal_article
user_id: '83781'
volume: 15
year: '2022'
...
---
_id: '8384'
abstract:
- lang: eng
text: "ynamic simulation models are widely utilized to evaluate complex technical
components and systems like electric drives or machines. They can support the
development process of a production machine by avoiding an inadequate layout of
components or an erroneous control design. However, the effort for building them
is often too high for this purpose (lot size one). An automated model generation
can be utilized to overcome the gap between efforts and advantages of dynamic
simulations.\r\n\r\nThis contribution presents an approach for simplifying the
dynamic model generation of production machines by using the so-called Asset Administration
Shell defined by the initiative Platform Industrie 4.0. The Asset Administration
Shell was developed to aggregate all data necessary for maintaining the product
across its life cycle. This includes component data and models as well as structural
information about a machine. The generation process is performed by using the
common FMI standard and a two-step procedure which allows the linkage of different
simulation tools. The model generation is demonstrated by an example layout of
a machine's internal direct current grid."
author:
- first_name: D.
full_name: Göllner, D.
last_name: Göllner
- first_name: Thomas
full_name: Pawlik, Thomas
id: '58915'
last_name: Pawlik
- first_name: Thomas
full_name: Schulte, Thomas
id: '46242'
last_name: Schulte
citation:
ama: Göllner D, Pawlik T, Schulte T. Utilization of the Asset Administration
Shell for the Generation of Dynamic Simulation Models. (IEEE Singapore Section,
IEEE TEMS Singapore Chapter,, IEEE TEMS Hong Kong Chapter, eds.). IEEE; 2021:808-812.
doi:10.1109/IEEM50564.2021.9673089
apa: Göllner, D., Pawlik, T., & Schulte, T. (2021). Utilization of the Asset
Administration Shell for the Generation of Dynamic Simulation Models. In IEEE
Singapore Section, IEEE TEMS Singapore Chapter, & IEEE TEMS Hong Kong Chapter
(Eds.), 2021 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM) (pp. 808–812). IEEE. https://doi.org/10.1109/IEEM50564.2021.9673089
bjps: 'Göllner D, Pawlik T and Schulte T (2021) Utilization of the Asset
Administration Shell for the Generation of Dynamic Simulation Models, IEEE
Singapore Section, IEEE TEMS Singapore Chapter, and IEEE TEMS Hong Kong Chapter
(eds). [Piscataway, NJ]: IEEE.'
chicago: 'Göllner, D., Thomas Pawlik, and Thomas Schulte. Utilization of the
Asset Administration Shell for the Generation of Dynamic Simulation Models.
Edited by IEEE Singapore Section, IEEE TEMS Singapore Chapter, and IEEE TEMS Hong
Kong Chapter. 2021 IEEE International Conference on Industrial Engineering
and Engineering Management (IEEM). IEEE International Conference on Industrial
Engineering and Engineering Management . [Piscataway, NJ]: IEEE, 2021. https://doi.org/10.1109/IEEM50564.2021.9673089.'
chicago-de: 'Göllner, D., Thomas Pawlik und Thomas Schulte. 2021. Utilization
of the Asset Administration Shell for the Generation of Dynamic Simulation Models.
Hg. von IEEE Singapore Section, IEEE TEMS Singapore Chapter, und IEEE TEMS Hong
Kong Chapter. 2021 IEEE International Conference on Industrial Engineering
and Engineering Management (IEEM). IEEE International Conference on Industrial
Engineering and Engineering Management . [Piscataway, NJ]: IEEE. doi:10.1109/IEEM50564.2021.9673089,
.'
din1505-2-1: 'Göllner, D. ; Pawlik, Thomas ; Schulte,
Thomas ; IEEE Singapore Section
; IEEE TEMS Singapore Chapter, ;
IEEE TEMS Hong Kong Chapter (Hrsg.):
Utilization of the Asset Administration Shell for the Generation of Dynamic
Simulation Models, IEEE International Conference on Industrial Engineering
and Engineering Management . [Piscataway, NJ] : IEEE, 2021'
havard: D. Göllner, T. Pawlik, T. Schulte, Utilization of the Asset Administration
Shell for the Generation of Dynamic Simulation Models, IEEE, [Piscataway, NJ],
2021.
ieee: 'D. Göllner, T. Pawlik, and T. Schulte, Utilization of the Asset Administration
Shell for the Generation of Dynamic Simulation Models. [Piscataway, NJ]: IEEE,
2021, pp. 808–812. doi: 10.1109/IEEM50564.2021.9673089.'
mla: Göllner, D., et al. “Utilization of the Asset Administration Shell for the
Generation of Dynamic Simulation Models.” 2021 IEEE International Conference
on Industrial Engineering and Engineering Management (IEEM), edited by IEEE
Singapore Section et al., IEEE, 2021, pp. 808–12, https://doi.org/10.1109/IEEM50564.2021.9673089.
short: D. Göllner, T. Pawlik, T. Schulte, Utilization of the Asset Administration
Shell for the Generation of Dynamic Simulation Models, IEEE, [Piscataway, NJ],
2021.
ufg: 'Göllner, D./Pawlik, Thomas/Schulte, Thomas: Utilization of the Asset
Administration Shell for the Generation of Dynamic Simulation Models, hg. von
IEEE Singapore Section/IEEE TEMS Singapore Chapter,, IEEE TEMS Hong Kong Chapter,
[Piscataway, NJ] 2021 (IEEE International Conference on Industrial Engineering
and Engineering Management ).'
van: 'Göllner D, Pawlik T, Schulte T. Utilization of the Asset Administration Shell
for the Generation of Dynamic Simulation Models. IEEE Singapore Section, IEEE
TEMS Singapore Chapter,, IEEE TEMS Hong Kong Chapter, editors. 2021 IEEE International
Conference on Industrial Engineering and Engineering Management (IEEM). [Piscataway,
NJ]: IEEE; 2021. (IEEE International Conference on Industrial Engineering and
Engineering Management ).'
conference:
end_date: 2021-12-16
location: Online (Singapore)
name: 2021 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM)
start_date: 2021-12-13
corporate_editor:
- IEEE Singapore Section
- IEEE TEMS Singapore Chapter,
- IEEE TEMS Hong Kong Chapter
date_created: 2022-06-22T14:14:28Z
date_updated: 2025-06-26T13:38:36Z
department:
- _id: DEP6020
- _id: DEP5022
doi: 10.1109/IEEM50564.2021.9673089
keyword:
- Digital Twin
- Asset Administration Shell
- Dynamic Simulation Model
- Industry 4.0
- Automated Model Generation
language:
- iso: eng
page: 808-812
place: '[Piscataway, NJ]'
publication: 2021 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM)
publication_identifier:
eisbn:
- 978-1-6654-3771-4
isbn:
- '978-1-6654-3772-1 '
issn:
- 2157-3611
publication_status: published
publisher: IEEE
series_title: 'IEEE International Conference on Industrial Engineering and Engineering
Management '
status: public
title: Utilization of the Asset Administration Shell for the Generation of Dynamic
Simulation Models
type: conference_editor_article
user_id: '83781'
year: '2021'
...
---
_id: '8430'
abstract:
- lang: eng
text: "This article highlights the special electrical properties of an industrial
DC grid and compares it with other typical DC grids. In this article, the extent
of transient overvoltages is presented, which must be assumed to be caused by
grid faults and switching operations. Basic measures for the protection of devices
are listed and evaluated.\r\n\r\nThe article clarifies that basic protection is
necessary for the reliable operation of devices in industrial DC grids, but is
easy to implement."
author:
- first_name: Holger
full_name: Borcherding, Holger
id: '1693'
last_name: Borcherding
- first_name: Johann
full_name: Austermann, Johann
id: '42114'
last_name: Austermann
- first_name: Simon
full_name: Puls, Simon
id: '85051'
last_name: Puls
citation:
ama: Borcherding H, Austermann J, Puls S. Potential Hazards of Transient Overvoltages
in an Industrial DC Grid and Basic Protective Measures. (Institute of Electrical
and Electronics Engineers, ed.). IEEE; 2021:625-630. doi:10.1109/ICIT46573.2021.9453597
apa: Borcherding, H., Austermann, J., & Puls, S. (2021). Potential Hazards of
Transient Overvoltages in an Industrial DC Grid and Basic Protective Measures.
In Institute of Electrical and Electronics Engineers (Ed.), 2021 22nd IEEE
International Conference on Industrial Technology (ICIT) (pp. 625–630). IEEE.
https://doi.org/10.1109/ICIT46573.2021.9453597
bjps: 'Borcherding H, Austermann J and Puls S (2021) Potential Hazards
of Transient Overvoltages in an Industrial DC Grid and Basic Protective Measures,
Institute of Electrical and Electronics Engineers (ed.). [Piscataway, NJ]: IEEE.'
chicago: 'Borcherding, Holger, Johann Austermann, and Simon Puls. Potential Hazards
of Transient Overvoltages in an Industrial DC Grid and Basic Protective Measures.
Edited by Institute of Electrical and Electronics Engineers. 2021 22nd IEEE
International Conference on Industrial Technology (ICIT). IEEE International
Conference on Industrial Technology. [Piscataway, NJ]: IEEE, 2021. https://doi.org/10.1109/ICIT46573.2021.9453597.'
chicago-de: 'Borcherding, Holger, Johann Austermann und Simon Puls. 2021. Potential
Hazards of Transient Overvoltages in an Industrial DC Grid and Basic Protective
Measures. Hg. von Institute of Electrical and Electronics Engineers. 2021
22nd IEEE International Conference on Industrial Technology (ICIT). IEEE International
Conference on Industrial Technology. [Piscataway, NJ]: IEEE. doi:10.1109/ICIT46573.2021.9453597,
.'
din1505-2-1: 'Borcherding, Holger
; Austermann, Johann ; Puls,
Simon ; Institute of Electrical
and Electronics Engineers (Hrsg.): Potential Hazards of Transient Overvoltages
in an Industrial DC Grid and Basic Protective Measures, IEEE International
Conference on Industrial Technology. [Piscataway, NJ] : IEEE, 2021'
havard: H. Borcherding, J. Austermann, S. Puls, Potential Hazards of Transient Overvoltages
in an Industrial DC Grid and Basic Protective Measures, IEEE, [Piscataway, NJ],
2021.
ieee: 'H. Borcherding, J. Austermann, and S. Puls, Potential Hazards of Transient
Overvoltages in an Industrial DC Grid and Basic Protective Measures. [Piscataway,
NJ]: IEEE, 2021, pp. 625–630. doi: 10.1109/ICIT46573.2021.9453597.'
mla: Borcherding, Holger, et al. “Potential Hazards of Transient Overvoltages in
an Industrial DC Grid and Basic Protective Measures.” 2021 22nd IEEE International
Conference on Industrial Technology (ICIT), edited by Institute of Electrical
and Electronics Engineers, IEEE, 2021, pp. 625–30, https://doi.org/10.1109/ICIT46573.2021.9453597.
short: H. Borcherding, J. Austermann, S. Puls, Potential Hazards of Transient Overvoltages
in an Industrial DC Grid and Basic Protective Measures, IEEE, [Piscataway, NJ],
2021.
ufg: 'Borcherding, Holger/Austermann, Johann/Puls, Simon: Potential Hazards
of Transient Overvoltages in an Industrial DC Grid and Basic Protective Measures,
hg. von Institute of Electrical and Electronics Engineers, [Piscataway, NJ] 2021
(IEEE International Conference on Industrial Technology).'
van: 'Borcherding H, Austermann J, Puls S. Potential Hazards of Transient Overvoltages
in an Industrial DC Grid and Basic Protective Measures. Institute of Electrical
and Electronics Engineers, editor. 2021 22nd IEEE International Conference on
Industrial Technology (ICIT). [Piscataway, NJ]: IEEE; 2021. (IEEE International
Conference on Industrial Technology).'
conference:
end_date: 2021-03-12
location: Valencia, Spain; Online
name: 22nd IEEE International Conference on Industrial Technology (ICIT)
start_date: 2021-03-10
corporate_editor:
- Institute of Electrical and Electronics Engineers
date_created: 2022-07-05T13:18:45Z
date_updated: 2025-06-26T13:35:32Z
department:
- _id: DEP6020
- _id: DEP5018
doi: 10.1109/ICIT46573.2021.9453597
keyword:
- drive inverters
- DC grid
- overvoltage protection
- DC grid faults
language:
- iso: eng
page: 625-630
place: '[Piscataway, NJ]'
publication: 2021 22nd IEEE International Conference on Industrial Technology (ICIT)
publication_identifier:
eisbn:
- '978-1-7281-5729-0 '
isbn:
- 978-1-7281-5730-6
issn:
- 2643-2978
publication_status: published
publisher: IEEE
quality_controlled: '1'
series_title: IEEE International Conference on Industrial Technology
status: public
title: Potential Hazards of Transient Overvoltages in an Industrial DC Grid and Basic
Protective Measures
type: conference_editor_article
user_id: '83781'
year: '2021'
...
---
_id: '8434'
abstract:
- lang: eng
text: An open industrial DCgrid for energy supply has many benefits. Also new challenges
arise by coupling the DClink capacitors of all devices, e.g. inverters. This paper
presents the effects of component failures causing short circuit faults in combination
with electrically coupled and charged DClink capacitors. Resulting energy flows
are shown, which arise in the DCgrid in case of faults. In addition, measurements
of short circuit tests and two solutions are shown, which enable the safe and
simple operation of an open industrial DCgrid.
author:
- first_name: Holger
full_name: Borcherding, Holger
id: '1693'
last_name: Borcherding
- first_name: Frederic
full_name: Blank, Frederic
last_name: Blank
- first_name: Olaf
full_name: Grünberg, Olaf
last_name: Grünberg
- first_name: Josef
full_name: Höflsauer, Josef
last_name: Höflsauer
- first_name: Simon
full_name: Puls, Simon
last_name: Puls
citation:
ama: Borcherding H, Blank F, Grünberg O, Höflsauer J, Puls S. EFFECTS OF COMPONENT
FAILURES IN DRIVE INVERTERS DURING PARALLEL OPERATING ON AN OPEN INDUSTRIAL DC
GRID. IEEE; 2021. doi:10.23919/EPE21ECCEEurope50061.2021.9570706
apa: Borcherding, H., Blank, F., Grünberg, O., Höflsauer, J., & Puls, S. (2021).
EFFECTS OF COMPONENT FAILURES IN DRIVE INVERTERS DURING PARALLEL OPERATING ON
AN OPEN INDUSTRIAL DC GRID. In 2021 23rd European Conference on Power Electronics
and Applications (EPE’21 ECCE Europe). 23rd European Conference on Power Electronics
and Applications (EPE ECCE Europe), Virtuell. IEEE. https://doi.org/10.23919/EPE21ECCEEurope50061.2021.9570706
bjps: Borcherding H et al. (2021) EFFECTS OF COMPONENT FAILURES
IN DRIVE INVERTERS DURING PARALLEL OPERATING ON AN OPEN INDUSTRIAL DC GRID.
IEEE.
chicago: Borcherding, Holger, Frederic Blank, Olaf Grünberg, Josef Höflsauer, and
Simon Puls. EFFECTS OF COMPONENT FAILURES IN DRIVE INVERTERS DURING PARALLEL
OPERATING ON AN OPEN INDUSTRIAL DC GRID. 2021 23rd European Conference
on Power Electronics and Applications (EPE’21 ECCE Europe). European Conference
on Power Electronics and Applications. IEEE, 2021. https://doi.org/10.23919/EPE21ECCEEurope50061.2021.9570706.
chicago-de: Borcherding, Holger, Frederic Blank, Olaf Grünberg, Josef Höflsauer
und Simon Puls. 2021. EFFECTS OF COMPONENT FAILURES IN DRIVE INVERTERS DURING
PARALLEL OPERATING ON AN OPEN INDUSTRIAL DC GRID. 2021 23rd European Conference
on Power Electronics and Applications (EPE’21 ECCE Europe). European Conference
on Power Electronics and Applications. IEEE. doi:10.23919/EPE21ECCEEurope50061.2021.9570706,
.
din1505-2-1: 'Borcherding, Holger
; Blank, Frederic ; Grünberg,
Olaf ; Höflsauer, Josef ;
Puls, Simon: EFFECTS OF COMPONENT
FAILURES IN DRIVE INVERTERS DURING PARALLEL OPERATING ON AN OPEN INDUSTRIAL DC
GRID, European Conference on Power Electronics and Applications : IEEE,
2021'
havard: H. Borcherding, F. Blank, O. Grünberg, J. Höflsauer, S. Puls, EFFECTS OF
COMPONENT FAILURES IN DRIVE INVERTERS DURING PARALLEL OPERATING ON AN OPEN INDUSTRIAL
DC GRID, IEEE, 2021.
ieee: 'H. Borcherding, F. Blank, O. Grünberg, J. Höflsauer, and S. Puls, EFFECTS
OF COMPONENT FAILURES IN DRIVE INVERTERS DURING PARALLEL OPERATING ON AN OPEN
INDUSTRIAL DC GRID. IEEE, 2021. doi: 10.23919/EPE21ECCEEurope50061.2021.9570706.'
mla: Borcherding, Holger, et al. “EFFECTS OF COMPONENT FAILURES IN DRIVE INVERTERS
DURING PARALLEL OPERATING ON AN OPEN INDUSTRIAL DC GRID.” 2021 23rd European
Conference on Power Electronics and Applications (EPE’21 ECCE Europe), IEEE,
2021, https://doi.org/10.23919/EPE21ECCEEurope50061.2021.9570706.
short: H. Borcherding, F. Blank, O. Grünberg, J. Höflsauer, S. Puls, EFFECTS OF
COMPONENT FAILURES IN DRIVE INVERTERS DURING PARALLEL OPERATING ON AN OPEN INDUSTRIAL
DC GRID, IEEE, 2021.
ufg: 'Borcherding, Holger u. a.: EFFECTS OF COMPONENT FAILURES IN DRIVE INVERTERS
DURING PARALLEL OPERATING ON AN OPEN INDUSTRIAL DC GRID, o. O. 2021 (European
Conference on Power Electronics and Applications).'
van: Borcherding H, Blank F, Grünberg O, Höflsauer J, Puls S. EFFECTS OF COMPONENT
FAILURES IN DRIVE INVERTERS DURING PARALLEL OPERATING ON AN OPEN INDUSTRIAL DC
GRID. 2021 23rd European Conference on Power Electronics and Applications (EPE’21
ECCE Europe). IEEE; 2021. (European Conference on Power Electronics and Applications).
conference:
end_date: 2021-09-10
location: Virtuell
name: 23rd European Conference on Power Electronics and Applications (EPE ECCE Europe)
start_date: 2021-09-06
date_created: 2022-07-05T13:52:33Z
date_updated: 2025-06-26T13:28:00Z
department:
- _id: DEP6020
- _id: DEP5018
doi: 10.23919/EPE21ECCEEurope50061.2021.9570706
external_id:
isi:
- '000832143902098'
isi: '1'
keyword:
- DC power supply
- Fault handling strategy
- Short circuit
- Grid-connected inverter
- DC machine
language:
- iso: eng
publication: 2021 23rd European Conference on Power Electronics and Applications (EPE’21
ECCE Europe)
publication_identifier:
eisbn:
- '978-90-75815-37-5 '
isbn:
- 978-1-6654-3384-6
issn:
- 2325-0313
publication_status: published
publisher: IEEE
quality_controlled: '1'
series_title: European Conference on Power Electronics and Applications
status: public
title: EFFECTS OF COMPONENT FAILURES IN DRIVE INVERTERS DURING PARALLEL OPERATING
ON AN OPEN INDUSTRIAL DC GRID
type: conference_editor_article
user_id: '83781'
year: '2021'
...
---
_id: '7033'
abstract:
- lang: eng
text: Industry 4.0 technologies influence how production is planned, scheduled,
and controlled. In literature, different classifications of the tasks and functions
of production planning and control (PPC) exist, of which one is the German Aachen
PPC model. This paper conducts an exploratory literature review by reviewing 48
publications on a full-text basis. Based on the review, a cyber-physical PPC architecture
is proposed, which incorporates current Industry 4.0 technologies, current optimisation
methods, optimisation objectives, and disturbances, relevant for the realisation
of a PPC system in a smart factory. A classification scheme is developed as a
basis for two cluster analyses that reveal researched and unexplored tasks and
functions of the Aachen PPC model. Current approaches focus on the in-house PPC,
particularly on the control using real-time information from the shop floor. Future
research directions are proposed for the unexplored tasks and functions of the
Aachen PPC model.
author:
- first_name: Jan-Phillip
full_name: Herrmann, Jan-Phillip
id: '75846'
last_name: Herrmann
- first_name: Sven
full_name: Tackenberg, Sven
id: '71470'
last_name: Tackenberg
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Thilo
full_name: Gamber, Thilo
id: '71451'
last_name: Gamber
citation:
ama: Herrmann JP, Tackenberg S, Padoano E, Gamber T. A literature review and cluster
analysis of the Aachen production planning and control model under Industry 4.0.
Procedia Computer Science. 2021;180:208-218. doi:10.1016/j.procs.2021.01.158
apa: Herrmann, J.-P., Tackenberg, S., Padoano, E., & Gamber, T. (2021). A literature
review and cluster analysis of the Aachen production planning and control model
under Industry 4.0. Procedia Computer Science, 180, 208–218. https://doi.org/10.1016/j.procs.2021.01.158
bjps: Herrmann J-P et al. (2021) A Literature Review and Cluster Analysis
of the Aachen Production Planning and Control Model under Industry 4.0. Procedia
Computer Science 180, 208–218.
chicago: 'Herrmann, Jan-Phillip, Sven Tackenberg, Elio Padoano, and Thilo Gamber.
“A Literature Review and Cluster Analysis of the Aachen Production Planning and
Control Model under Industry 4.0.” Procedia Computer Science 180 (2021):
208–18. https://doi.org/10.1016/j.procs.2021.01.158.'
chicago-de: 'Herrmann, Jan-Phillip, Sven Tackenberg, Elio Padoano und Thilo Gamber.
2021. A literature review and cluster analysis of the Aachen production planning
and control model under Industry 4.0. Procedia Computer Science 180: 208–218.
doi:10.1016/j.procs.2021.01.158,
.'
din1505-2-1: 'Herrmann, Jan-Phillip
; Tackenberg, Sven ; Padoano,
Elio ; Gamber, Thilo: A literature
review and cluster analysis of the Aachen production planning and control model
under Industry 4.0. In: Procedia Computer Science Bd. 180, Elsevier (2021),
S. 208–218'
havard: J.-P. Herrmann, S. Tackenberg, E. Padoano, T. Gamber, A literature review
and cluster analysis of the Aachen production planning and control model under
Industry 4.0, Procedia Computer Science. 180 (2021) 208–218.
ieee: 'J.-P. Herrmann, S. Tackenberg, E. Padoano, and T. Gamber, “A literature review
and cluster analysis of the Aachen production planning and control model under
Industry 4.0,” Procedia Computer Science, vol. 180, pp. 208–218, 2021,
doi: 10.1016/j.procs.2021.01.158.'
mla: Herrmann, Jan-Phillip, et al. “A Literature Review and Cluster Analysis of
the Aachen Production Planning and Control Model under Industry 4.0.” Procedia
Computer Science, vol. 180, 2021, pp. 208–18, https://doi.org/10.1016/j.procs.2021.01.158.
short: J.-P. Herrmann, S. Tackenberg, E. Padoano, T. Gamber, Procedia Computer Science
180 (2021) 208–218.
ufg: 'Herrmann, Jan-Phillip u. a.: A literature review and cluster analysis
of the Aachen production planning and control model under Industry 4.0, in: Procedia
Computer Science 180 (2021), S. 208–218.'
van: Herrmann JP, Tackenberg S, Padoano E, Gamber T. A literature review and cluster
analysis of the Aachen production planning and control model under Industry 4.0.
Procedia Computer Science. 2021;180:208–18.
date_created: 2022-02-08T14:43:59Z
date_updated: 2024-08-05T08:48:34Z
department:
- _id: DEP7020
- _id: DEP1305
doi: 10.1016/j.procs.2021.01.158
intvolume: ' 180'
keyword:
- Production planning
- control
- Industry 4.0
- Industrial Internet of Things
- Exploratory literature review
language:
- iso: eng
page: 208-218
publication: Procedia Computer Science
publication_identifier:
issn:
- 1877-0509
publication_status: published
publisher: Elsevier
status: public
title: A literature review and cluster analysis of the Aachen production planning
and control model under Industry 4.0
type: journal_article
user_id: '83781'
volume: 180
year: '2021'
...
---
_id: '4897'
abstract:
- lang: eng
text: Assistance is becoming increasingly relevant in carrying out industrial work
in the context of cyber-physical production systems (CPPSs) and Industry 4.0.
While assistance in a single task via a single interaction modality has been explored
previously, crossdevice interaction could improve the quality of assistance, especially
given the concurrent and distributed nature of work in CPPSs. In this paper, we
present the theoretical foundations and implementation of MiWSICx (Middleware
for Work Support in Industrial Contexts), a middleware that showcases how multiple
interactive computing devices such as tablets, smartphones, augmented/virtual
reality glasses, and wearables could be combined to provide crossdevice industrial
assistance. Based on activity theory, MiWSICx models human work as activities
combining multiple users, artifacts, and cyber-physical objects. MiWSICx is developed
using the actor model for deployment on a variety of hardware alongside a CPPS
to provide multiuser, crossdevice, multiactivity assistance.
author:
- first_name: Hitesh
full_name: Dhiman, Hitesh
id: '71767'
last_name: Dhiman
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: Dhiman H, Röcker C. Middleware for providing activity-driven assistance in
cyber-physical production systems. Journal of Computational Design and Engineering.
2021;8(1):428-451. doi:10.1093/jcde/qwaa088
apa: Dhiman, H., & Röcker, C. (2021). Middleware for providing activity-driven
assistance in cyber-physical production systems. Journal of Computational Design
and Engineering, 8(1), 428–451. https://doi.org/10.1093/jcde/qwaa088
bjps: Dhiman H and Röcker C (2021) Middleware for Providing Activity-Driven
Assistance in Cyber-Physical Production Systems. Journal of Computational Design
and Engineering 8, 428–451.
chicago: 'Dhiman, Hitesh, and Carsten Röcker. “Middleware for Providing Activity-Driven
Assistance in Cyber-Physical Production Systems.” Journal of Computational
Design and Engineering 8, no. 1 (2021): 428–51. https://doi.org/10.1093/jcde/qwaa088.'
chicago-de: 'Dhiman, Hitesh und Carsten Röcker. 2021. Middleware for providing activity-driven
assistance in cyber-physical production systems. Journal of Computational Design
and Engineering 8, Nr. 1: 428–451. doi:10.1093/jcde/qwaa088,
.'
din1505-2-1: 'Dhiman, Hitesh ; Röcker, Carsten: Middleware for providing
activity-driven assistance in cyber-physical production systems. In: Journal
of Computational Design and Engineering Bd. 8. Oxford, Oxford University Press
(2021), Nr. 1, S. 428–451'
havard: H. Dhiman, C. Röcker, Middleware for providing activity-driven assistance
in cyber-physical production systems, Journal of Computational Design and Engineering.
8 (2021) 428–451.
ieee: H. Dhiman and C. Röcker, “Middleware for providing activity-driven assistance
in cyber-physical production systems,” Journal of Computational Design and
Engineering, vol. 8, no. 1, pp. 428–451, 2021.
mla: Dhiman, Hitesh, and Carsten Röcker. “Middleware for Providing Activity-Driven
Assistance in Cyber-Physical Production Systems.” Journal of Computational
Design and Engineering, vol. 8, no. 1, Oxford University Press, 2021, pp.
428–51, doi:10.1093/jcde/qwaa088.
short: H. Dhiman, C. Röcker, Journal of Computational Design and Engineering 8 (2021)
428–451.
ufg: 'Dhiman, Hitesh/Röcker, Carsten (2021): Middleware for providing activity-driven
assistance in cyber-physical production systems, in: Journal of Computational
Design and Engineering 8 (1), S. 428–451.'
van: Dhiman H, Röcker C. Middleware for providing activity-driven assistance in
cyber-physical production systems. Journal of Computational Design and Engineering.
2021;8(1):428–51.
date_created: 2021-02-04T15:20:11Z
date_updated: 2023-03-15T13:49:56Z
department:
- _id: DEP5023
- _id: DEP5027
doi: 10.1093/jcde/qwaa088
intvolume: ' 8'
issue: '1'
keyword:
- human–technology interaction
- human–computer interaction
- crossdevice interaction
- cyber-physical systems
- assistance
- smart factory
- middleware
- actor model
- information system design
- industry 4.0
language:
- iso: eng
page: 428-451
place: Oxford
publication: Journal of Computational Design and Engineering
publication_identifier:
eissn:
- '2288-4300 '
publication_status: published
publisher: Oxford University Press
status: public
title: Middleware for providing activity-driven assistance in cyber-physical production
systems
type: journal_article
user_id: '15514'
volume: 8
year: 2021
...
---
_id: '12800'
abstract:
- lang: eng
text: his paper presents the cognitive module of the Cognitive Architecture for
Artificial Intelligence (CAAI) in cyber-physical production systems (CPPS). The
goal of this architecture is to reduce the implementation effort of artificial
intelligence (AI) algorithms in CPPS. Declarative user goals and the provided
algorithm-knowledge base allow the dynamic pipeline orchestration and configuration.
A big data platform (BDP) instantiates the pipelines and monitors the CPPS performance
for further evaluation through the cognitive module. Thus, the cognitive module
is able to select feasible and robust configurations for process pipelines in
varying use cases. Furthermore, it automatically adapts the models and algorithms
based on model quality and resource consumption. The cognitive module also instantiates
additional pipelines to evaluate algorithms from different classes on test functions.
CAAI relies on well-defined interfaces to enable the integration of additional
modules and reduce implementation effort. Finally, an implementation based on
Docker, Kubernetes, and Kafka for the virtualization and orchestration of the
individual modules and as messaging technology for module communication is used
to evaluate a real-world use case.
author:
- first_name: Jan
full_name: Strohschein, Jan
last_name: Strohschein
- first_name: Andreas
full_name: Fischbach, Andreas
last_name: Fischbach
- first_name: Andreas
full_name: Bunte, Andreas
id: '58885'
last_name: Bunte
- first_name: Heide
full_name: Faeskorn-Woyke, Heide
last_name: Faeskorn-Woyke
- first_name: Natalia
full_name: Moriz, Natalia
id: '44238'
last_name: Moriz
- first_name: Thomas
full_name: Bartz-Beielstein, Thomas
last_name: Bartz-Beielstein
citation:
ama: Strohschein J, Fischbach A, Bunte A, Faeskorn-Woyke H, Moriz N, Bartz-Beielstein
T. Cognitive capabilities for the CAAI in cyber-physical production systems. The
International Journal of Advanced Manufacturing Technology. 2021;115(11-12):3513-3532.
doi:10.1007/s00170-021-07248-3
apa: Strohschein, J., Fischbach, A., Bunte, A., Faeskorn-Woyke, H., Moriz, N., &
Bartz-Beielstein, T. (2021). Cognitive capabilities for the CAAI in cyber-physical
production systems. The International Journal of Advanced Manufacturing Technology,
115(11–12), 3513–3532. https://doi.org/10.1007/s00170-021-07248-3
bjps: Strohschein J et al. (2021) Cognitive Capabilities for the CAAI
in Cyber-Physical Production Systems. The International Journal of Advanced
Manufacturing Technology 115, 3513–3532.
chicago: 'Strohschein, Jan, Andreas Fischbach, Andreas Bunte, Heide Faeskorn-Woyke,
Natalia Moriz, and Thomas Bartz-Beielstein. “Cognitive Capabilities for the CAAI
in Cyber-Physical Production Systems.” The International Journal of Advanced
Manufacturing Technology 115, no. 11–12 (2021): 3513–32. https://doi.org/10.1007/s00170-021-07248-3.'
chicago-de: 'Strohschein, Jan, Andreas Fischbach, Andreas Bunte, Heide Faeskorn-Woyke,
Natalia Moriz und Thomas Bartz-Beielstein. 2021. Cognitive capabilities for the
CAAI in cyber-physical production systems. The International Journal of Advanced
Manufacturing Technology 115, Nr. 11–12: 3513–3532. doi:10.1007/s00170-021-07248-3,
.'
din1505-2-1: 'Strohschein, Jan ; Fischbach, Andreas ; Bunte,
Andreas ; Faeskorn-Woyke, Heide
; Moriz, Natalia ; Bartz-Beielstein,
Thomas: Cognitive capabilities for the CAAI in cyber-physical production
systems. In: The International Journal of Advanced Manufacturing Technology
Bd. 115. London [u.a.], Springer (2021), Nr. 11–12, S. 3513–3532'
havard: J. Strohschein, A. Fischbach, A. Bunte, H. Faeskorn-Woyke, N. Moriz, T.
Bartz-Beielstein, Cognitive capabilities for the CAAI in cyber-physical production
systems, The International Journal of Advanced Manufacturing Technology. 115 (2021)
3513–3532.
ieee: 'J. Strohschein, A. Fischbach, A. Bunte, H. Faeskorn-Woyke, N. Moriz, and
T. Bartz-Beielstein, “Cognitive capabilities for the CAAI in cyber-physical production
systems,” The International Journal of Advanced Manufacturing Technology,
vol. 115, no. 11–12, pp. 3513–3532, 2021, doi: 10.1007/s00170-021-07248-3.'
mla: Strohschein, Jan, et al. “Cognitive Capabilities for the CAAI in Cyber-Physical
Production Systems.” The International Journal of Advanced Manufacturing Technology,
vol. 115, no. 11–12, 2021, pp. 3513–32, https://doi.org/10.1007/s00170-021-07248-3.
short: J. Strohschein, A. Fischbach, A. Bunte, H. Faeskorn-Woyke, N. Moriz, T. Bartz-Beielstein,
The International Journal of Advanced Manufacturing Technology 115 (2021) 3513–3532.
ufg: 'Strohschein, Jan u. a.: Cognitive capabilities for the CAAI in cyber-physical
production systems, in: The International Journal of Advanced Manufacturing
Technology 115 (2021), H. 11–12, S. 3513–3532.'
van: Strohschein J, Fischbach A, Bunte A, Faeskorn-Woyke H, Moriz N, Bartz-Beielstein
T. Cognitive capabilities for the CAAI in cyber-physical production systems. The
International Journal of Advanced Manufacturing Technology. 2021;115(11–12):3513–32.
date_created: 2025-04-15T13:05:17Z
date_updated: 2025-06-26T13:39:22Z
department:
- _id: DEP5023
doi: 10.1007/s00170-021-07248-3
external_id:
isi:
- '000659025000010'
intvolume: ' 115'
isi: '1'
issue: 11-12
keyword:
- Cognition
- Industry 40
- Big data platform
- Machine learning
- CPPS
- Optimization
- Algorithm selection
- Simulation
language:
- iso: eng
page: 3513-3532
place: London [u.a.]
publication: The International Journal of Advanced Manufacturing Technology
publication_identifier:
eissn:
- 1433-3015
issn:
- 0268-3768
publication_status: published
publisher: 'Springer '
status: public
title: Cognitive capabilities for the CAAI in cyber-physical production systems
type: scientific_journal_article
user_id: '83781'
volume: 115
year: '2021'
...
---
_id: '4518'
abstract:
- lang: eng
text: This paper introduces CAAI, a novel cognitive architecture for artificial
intelligence in cyber-physical production systems. The goal of the architecture
is to reduce the implementation effort for the usage of artificial intelligence
algorithms. The core of the CAAI is a cognitive module that processes the user's
declarative goals, selects suitable models and algorithms, and creates a configuration
for the execution of a processing pipeline on a big data platform. Constant observation
and evaluation against performance criteria assess the performance of pipelines
for many and different use cases. Based on these evaluations, the pipelines are
automatically adapted if necessary. The modular design with well-defined interfaces
enables the reusability and extensibility of pipeline components. A big data platform
implements this modular design supported by technologies such as Docker, Kubernetes,
and Kafka for virtualization and orchestration of the individual components and
their communication. The implementation of the architecture is evaluated using
a real-world use case. The prototypic implementation is accessible on GitHub and
contains a demonstration.
author:
- first_name: Andreas
full_name: Fischbach, Andreas
last_name: Fischbach
- first_name: Jan
full_name: Strohschein, Jan
last_name: Strohschein
- first_name: Andreas
full_name: Bunte, Andreas
id: '58885'
last_name: Bunte
- first_name: Jörg
full_name: Stork, Jörg
last_name: Stork
- first_name: Heide
full_name: Faeskorn-Woyke, Heide
last_name: Faeskorn-Woyke
- first_name: Natalia
full_name: Moriz, Natalia
id: '44238'
last_name: Moriz
- first_name: Thomas
full_name: Bartz-Beielstein, Thomas
last_name: Bartz-Beielstein
citation:
ama: Fischbach A, Strohschein J, Bunte A, et al. CAAI -- A Cognitive Architecture
to Introduce Artificial Intelligence in Cyber-Physical Production Systems. The
International Journal of Advanced Manufacturing Technology. 2020;111(1/2):609-626.
doi:10.1007/s00170-020-06094-z
apa: Fischbach, A., Strohschein, J., Bunte, A., Stork, J., Faeskorn-Woyke, H., Moriz,
N., & Bartz-Beielstein, T. (2020). CAAI -- A Cognitive Architecture to Introduce
Artificial Intelligence in Cyber-Physical Production Systems. The International
Journal of Advanced Manufacturing Technology, 111(1/2), 609–626. https://doi.org/10.1007/s00170-020-06094-z
bjps: Fischbach A et al. (2020) CAAI -- A Cognitive Architecture to
Introduce Artificial Intelligence in Cyber-Physical Production Systems. The
International Journal of Advanced Manufacturing Technology 111, 609–626.
chicago: 'Fischbach, Andreas, Jan Strohschein, Andreas Bunte, Jörg Stork, Heide
Faeskorn-Woyke, Natalia Moriz, and Thomas Bartz-Beielstein. “CAAI -- A Cognitive
Architecture to Introduce Artificial Intelligence in Cyber-Physical Production
Systems.” The International Journal of Advanced Manufacturing Technology
111, no. 1/2 (2020): 609–26. https://doi.org/10.1007/s00170-020-06094-z.'
chicago-de: 'Fischbach, Andreas, Jan Strohschein, Andreas Bunte, Jörg Stork, Heide
Faeskorn-Woyke, Natalia Moriz und Thomas Bartz-Beielstein. 2020. CAAI -- A Cognitive
Architecture to Introduce Artificial Intelligence in Cyber-Physical Production
Systems. The International Journal of Advanced Manufacturing Technology
111, Nr. 1/2: 609–626. doi:10.1007/s00170-020-06094-z,
.'
din1505-2-1: 'Fischbach, Andreas ;
Strohschein, Jan ; Bunte,
Andreas ; Stork, Jörg ; Faeskorn-Woyke, Heide ; Moriz,
Natalia ; Bartz-Beielstein, Thomas:
CAAI -- A Cognitive Architecture to Introduce Artificial Intelligence in Cyber-Physical
Production Systems. In: The International Journal of Advanced Manufacturing
Technology Bd. 111, Springer (2020), Nr. 1/2, S. 609–626'
havard: A. Fischbach, J. Strohschein, A. Bunte, J. Stork, H. Faeskorn-Woyke, N.
Moriz, T. Bartz-Beielstein, CAAI -- A Cognitive Architecture to Introduce Artificial
Intelligence in Cyber-Physical Production Systems, The International Journal of
Advanced Manufacturing Technology. 111 (2020) 609–626.
ieee: 'A. Fischbach et al., “CAAI -- A Cognitive Architecture to Introduce
Artificial Intelligence in Cyber-Physical Production Systems,” The International
Journal of Advanced Manufacturing Technology, vol. 111, no. 1/2, pp. 609–626,
2020, doi: 10.1007/s00170-020-06094-z.'
mla: Fischbach, Andreas, et al. “CAAI -- A Cognitive Architecture to Introduce Artificial
Intelligence in Cyber-Physical Production Systems.” The International Journal
of Advanced Manufacturing Technology, vol. 111, no. 1/2, 2020, pp. 609–26,
https://doi.org/10.1007/s00170-020-06094-z.
short: A. Fischbach, J. Strohschein, A. Bunte, J. Stork, H. Faeskorn-Woyke, N. Moriz,
T. Bartz-Beielstein, The International Journal of Advanced Manufacturing Technology
111 (2020) 609–626.
ufg: 'Fischbach, Andreas u. a.: CAAI -- A Cognitive Architecture to Introduce
Artificial Intelligence in Cyber-Physical Production Systems, in: The International
Journal of Advanced Manufacturing Technology 111 (2020), H. 1/2, S. 609–626.'
van: Fischbach A, Strohschein J, Bunte A, Stork J, Faeskorn-Woyke H, Moriz N, et
al. CAAI -- A Cognitive Architecture to Introduce Artificial Intelligence in Cyber-Physical
Production Systems. The International Journal of Advanced Manufacturing Technology.
2020;111(1/2):609–26.
date_created: 2021-01-26T12:24:10Z
date_updated: 2025-06-26T13:38:24Z
department:
- _id: DEP5023
doi: 10.1007/s00170-020-06094-z
external_id:
isi:
- '000574389900002'
intvolume: ' 111'
isi: '1'
issue: 1/2
keyword:
- CPPS
- Artificial intelligence
- Industry 40
- Reference architecture
- Optimization
- SMBO
- Cognition
- Big data platform
- Modularization
- AutoML
language:
- iso: eng
page: 609-626
publication: The International Journal of Advanced Manufacturing Technology
publication_identifier:
eissn:
- 1433-3015
issn:
- 0268-3768
publication_status: published
publisher: Springer
status: public
title: CAAI -- A Cognitive Architecture to Introduce Artificial Intelligence in Cyber-Physical
Production Systems
type: journal_article
user_id: '83781'
volume: 111
year: '2020'
...
---
_id: '1904'
abstract:
- lang: eng
text: As the number of variations increases and batch sizes grow smaller, it can
be difficult to fulfill quality and productivity requirements in manual assembly,
as employees must record, process and interpret more information, then convert
that information into action. Conventional instruction manuals in the form of
text, tables or drawings quickly reach their limits. Innovative assistance systems
are essential for keeping up with these changes, as they instruct and support
employees in line with their specific situations. The goal of this article is
to use a case study to illustrate the problems with providing information in manual
assembly, and to suggest a potential solution in the form of an informational
assistance system. The company considered in the case study stands out for its
large production areas where complex, customer-specific truck bodies are mounted
manually.
author:
- first_name: Alexander
full_name: Nikolenko, Alexander
id: '71431'
last_name: Nikolenko
- first_name: Philip
full_name: Sehr, Philip
id: '71582'
last_name: Sehr
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Sven
full_name: Bendzioch, Sven
id: '71395'
last_name: Bendzioch
citation:
ama: 'Nikolenko A, Sehr P, Hinrichsen S, Bendzioch S. Digital Assembly Assistance
Systems – A Case Study. In: Nunes IL, ed. Advances in Human Factors and Systems
Interaction AHFE 2019. Vol 959. Advances in Human Factors and Systems Interaction.
Cham: Springer; 2020:24-33. doi:https://doi.org/10.1007/978-3-030-20040-4_3'
apa: 'Nikolenko, A., Sehr, P., Hinrichsen, S., & Bendzioch, S. (2020). Digital
Assembly Assistance Systems – A Case Study. In I. L. Nunes (Ed.), Advances
in Human Factors and Systems Interaction AHFE 2019 (Vol. 959, pp. 24–33).
Cham: Springer. https://doi.org/10.1007/978-3-030-20040-4_3'
bjps: 'Nikolenko A et al. (2020) Digital Assembly Assistance Systems
– A Case Study. In Nunes IL (ed.), Advances in Human Factors and Systems Interaction
AHFE 2019, vol. 959. Cham: Springer, pp. 24–33.'
chicago: 'Nikolenko, Alexander, Philip Sehr, Sven Hinrichsen, and Sven Bendzioch.
“Digital Assembly Assistance Systems – A Case Study.” In Advances in Human
Factors and Systems Interaction AHFE 2019, edited by Isabel L. Nunes, 959:24–33.
Advances in Human Factors and Systems Interaction. Cham: Springer, 2020. https://doi.org/10.1007/978-3-030-20040-4_3.'
chicago-de: 'Nikolenko, Alexander, Philip Sehr, Sven Hinrichsen und Sven Bendzioch.
2020. Digital Assembly Assistance Systems – A Case Study. In: Advances in Human
Factors and Systems Interaction AHFE 2019, hg. von Isabel L. Nunes, 959:24–33.
Advances in Human Factors and Systems Interaction. Cham: Springer. doi:https://doi.org/10.1007/978-3-030-20040-4_3,
.'
din1505-2-1: 'Nikolenko, Alexander
; Sehr, Philip ; Hinrichsen,
Sven ; Bendzioch, Sven: Digital
Assembly Assistance Systems – A Case Study. In: Nunes,
I. L. (Hrsg.): Advances in Human Factors and Systems Interaction AHFE
2019, Advances in Human Factors and Systems Interaction. Bd. 959. Cham :
Springer, 2020, S. 24–33'
havard: 'A. Nikolenko, P. Sehr, S. Hinrichsen, S. Bendzioch, Digital Assembly Assistance
Systems – A Case Study, in: I.L. Nunes (Ed.), Advances in Human Factors and Systems
Interaction AHFE 2019, Springer, Cham, 2020: pp. 24–33.'
ieee: A. Nikolenko, P. Sehr, S. Hinrichsen, and S. Bendzioch, “Digital Assembly
Assistance Systems – A Case Study,” in Advances in Human Factors and Systems
Interaction AHFE 2019, Washington D.C., USA, 2020, vol. 959, pp. 24–33.
mla: Nikolenko, Alexander, et al. “Digital Assembly Assistance Systems – A Case
Study.” Advances in Human Factors and Systems Interaction AHFE 2019, edited
by Isabel L. Nunes, vol. 959, Springer, 2020, pp. 24–33, doi:https://doi.org/10.1007/978-3-030-20040-4_3.
short: 'A. Nikolenko, P. Sehr, S. Hinrichsen, S. Bendzioch, in: I.L. Nunes (Ed.),
Advances in Human Factors and Systems Interaction AHFE 2019, Springer, Cham, 2020,
pp. 24–33.'
ufg: 'Nikolenko, Alexander et. al. (2020): Digital Assembly Assistance Systems
– A Case Study, in: Isabel L. Nunes (Hg.): Advances in Human Factors and Systems
Interaction AHFE 2019 (=Advances in Human Factors and Systems Interaction
959), Cham, S. 24–33.'
van: 'Nikolenko A, Sehr P, Hinrichsen S, Bendzioch S. Digital Assembly Assistance
Systems – A Case Study. In: Nunes IL, editor. Advances in Human Factors and Systems
Interaction AHFE 2019. Cham: Springer; 2020. p. 24–33. (Advances in Human Factors
and Systems Interaction; vol. 959).'
conference:
end_date: 2019-07-28
location: Washington D.C., USA
name: 10th International Conference on Applied Human Factors and Ergonomics 2019
start_date: 2019-07-24
date_created: 2019-09-10T06:58:30Z
date_updated: 2023-03-15T13:49:37Z
department:
- _id: DEP7020
- _id: DEP1305
doi: https://doi.org/10.1007/978-3-030-20040-4_3
editor:
- first_name: Isabel L.
full_name: Nunes, Isabel L.
last_name: Nunes
intvolume: ' 959'
keyword:
- Manual assembly
- Assembly assistance systems
- Industry 4.0
- Information delivery
language:
- iso: eng
page: 24-33
place: Cham
project:
- _id: FBB6D104-44D9-11E9-AA25-B54CDB794CE1
name: Montexas 4.0
publication: Advances in Human Factors and Systems Interaction AHFE 2019
publication_identifier:
eisbn:
- 978-3-030-20040-4
isbn:
- 978-3-030-20039-8
issn:
- 2194-5357
publication_status: published
publisher: Springer
quality_controlled: '1'
series_title: Advances in Human Factors and Systems Interaction
status: public
title: Digital Assembly Assistance Systems – A Case Study
type: conference
user_id: '49010'
volume: 959
year: 2020
...
---
_id: '4918'
abstract:
- lang: eng
text: An open industrial DC grid has a lot of advantages. Also new challenges arise
by coupling several DC link capacitors of inverters. This paper presents an approach
and measurements of an active device protection to withstand possible faults that
can occur in the DC grid. In particular, robustness in the event of faults plays
a key role.
author:
- first_name: Simon
full_name: Puls, Simon
id: '85051'
last_name: Puls
- first_name: Urs
full_name: Obernolte, Urs
last_name: Obernolte
- first_name: Holger
full_name: Borcherding, Holger
id: '1693'
last_name: Borcherding
- first_name: Martin
full_name: Ehlich, Martin
last_name: Ehlich
citation:
ama: Puls S, Obernolte U, Borcherding H, Ehlich M. Approach of an Active Device
Protection for Drive Inverters against Short Circuit Faults in an Open Industrial
DC Grid. IEEE; 2020. doi:10.23919/EPE20ECCEEurope43536.2020.9215949
apa: Puls, S., Obernolte, U., Borcherding, H., & Ehlich, M. (2020). Approach
of an Active Device Protection for Drive Inverters against Short Circuit Faults
in an Open Industrial DC Grid. In 2020 22nd European Conference on Power Electronics
and Applications (EPE’20 ECCE Europe VIRTUAL). 22nd European Conference on
Power Electronics and Applications (EPE’20 ECCE Europe VIRTUAL), Lyon, France.
IEEE. https://doi.org/10.23919/EPE20ECCEEurope43536.2020.9215949
bjps: Puls S et al. (2020) Approach of an Active Device Protection
for Drive Inverters against Short Circuit Faults in an Open Industrial DC Grid.
IEEE.
chicago: Puls, Simon, Urs Obernolte, Holger Borcherding, and Martin Ehlich. Approach
of an Active Device Protection for Drive Inverters against Short Circuit Faults
in an Open Industrial DC Grid. 2020 22nd European Conference on Power Electronics
and Applications (EPE’20 ECCE Europe VIRTUAL). IEEE, 2020. https://doi.org/10.23919/EPE20ECCEEurope43536.2020.9215949.
chicago-de: Puls, Simon, Urs Obernolte, Holger Borcherding und Martin Ehlich. 2020.
Approach of an Active Device Protection for Drive Inverters against Short Circuit
Faults in an Open Industrial DC Grid. 2020 22nd European Conference on
Power Electronics and Applications (EPE’20 ECCE Europe VIRTUAL). IEEE. doi:10.23919/EPE20ECCEEurope43536.2020.9215949,
.
din1505-2-1: 'Puls, Simon ; Obernolte, Urs ; Borcherding,
Holger ; Ehlich, Martin:
Approach of an Active Device Protection for Drive Inverters against Short Circuit
Faults in an Open Industrial DC Grid : IEEE, 2020'
havard: S. Puls, U. Obernolte, H. Borcherding, M. Ehlich, Approach of an Active
Device Protection for Drive Inverters against Short Circuit Faults in an Open
Industrial DC Grid, IEEE, 2020.
ieee: 'S. Puls, U. Obernolte, H. Borcherding, and M. Ehlich, Approach of an Active
Device Protection for Drive Inverters against Short Circuit Faults in an Open
Industrial DC Grid. IEEE, 2020. doi: 10.23919/EPE20ECCEEurope43536.2020.9215949.'
mla: Puls, Simon, et al. “Approach of an Active Device Protection for Drive Inverters
against Short Circuit Faults in an Open Industrial DC Grid.” 2020 22nd European
Conference on Power Electronics and Applications (EPE’20 ECCE Europe VIRTUAL),
IEEE, 2020, https://doi.org/10.23919/EPE20ECCEEurope43536.2020.9215949.
short: S. Puls, U. Obernolte, H. Borcherding, M. Ehlich, Approach of an Active Device
Protection for Drive Inverters against Short Circuit Faults in an Open Industrial
DC Grid, IEEE, 2020.
ufg: 'Puls, Simon u. a.: Approach of an Active Device Protection for Drive
Inverters against Short Circuit Faults in an Open Industrial DC Grid, o. O. 2020.'
van: Puls S, Obernolte U, Borcherding H, Ehlich M. Approach of an Active Device
Protection for Drive Inverters against Short Circuit Faults in an Open Industrial
DC Grid. 2020 22nd European Conference on Power Electronics and Applications (EPE’20
ECCE Europe VIRTUAL). IEEE; 2020.
conference:
end_date: 2020-09-11
location: Lyon, France
name: 22nd European Conference on Power Electronics and Applications (EPE'20 ECCE
Europe VIRTUAL)
start_date: 2020-09-07
date_created: 2020-12-14T13:55:20Z
date_updated: 2025-06-26T13:35:13Z
department:
- _id: DEP6020
- _id: DEP5018
doi: 10.23919/EPE20ECCEEurope43536.2020.9215949
keyword:
- DC grid
- fault handling strategy
- DC-power supply
- active protection
- drive inverters
language:
- iso: eng
main_file_link:
- url: https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=7695572
publication: 2020 22nd European Conference on Power Electronics and Applications (EPE'20
ECCE Europe VIRTUAL)
publication_identifier:
eisbn:
- 978-9-0758-1536-8
isbn:
- 978-1-7281-9807-1
issn:
- 2325-0313
publication_status: published
publisher: IEEE
quality_controlled: '1'
status: public
title: Approach of an Active Device Protection for Drive Inverters against Short Circuit
Faults in an Open Industrial DC Grid
type: conference_editor_article
user_id: '83781'
year: '2020'
...
---
_id: '12812'
abstract:
- lang: eng
text: Discerning unexpected from expected data patterns is the key challenge of
anomaly detection. Although a multitude of solutions has been applied to this
modern Industry 4.0 problem, it remains an open research issue to identify the
key characteristics subjacent to an anomaly, sc. generate hypothesis as to why
they appear. In recent years, machine learning models have been regarded as universal
solution for a wide range of problems. While most of them suffer from non-self-explanatory
representations, Gaussian Processes (GPs) deliver interpretable and robust statistical
data models, which are able to cope with unreliable, noisy, or partially missing
data. Thus, we regard them as a suitable solution for detecting and appropriately
representing anomalies and their respective characteristics. In this position
paper, we discuss the problem of automatic and interpretable anomaly detection
by means of GPs. That is, we elaborate on why GPs are well suited for anomaly
detection and what the current challenges are when applying these probabilistic
models to large-scale production data.
author:
- first_name: Fabian
full_name: Berns, Fabian
last_name: Berns
- first_name: Markus
full_name: Lange-Hegermann, Markus
id: '71761'
last_name: Lange-Hegermann
- first_name: Christian
full_name: Beecks, Christian
last_name: Beecks
citation:
ama: Berns F, Lange-Hegermann M, Beecks C. Towards Gaussian Processes for Automatic
and Interpretable Anomaly Detection in Industry 4.0. (Panetto H, Madani K,
Smirnov A, eds.). SCITEPRESS - Science and Technology Publications; 2020:87-92.
doi:10.5220/0010130300870092
apa: Berns, F., Lange-Hegermann, M., & Beecks, C. (2020). Towards Gaussian Processes
for Automatic and Interpretable Anomaly Detection in Industry 4.0. In H. Panetto,
K. Madani, & A. Smirnov (Eds.), Proceedings of the International Conference
on Innovative Intelligent Industrial Production and Logistics IN4PL - Volume 1
(pp. 87–92). SCITEPRESS - Science and Technology Publications. https://doi.org/10.5220/0010130300870092
bjps: Berns F, Lange-Hegermann M and Beecks C (2020) Towards Gaussian
Processes for Automatic and Interpretable Anomaly Detection in Industry 4.0,
Panetto H, Madani K and Smirnov A (eds). SCITEPRESS - Science and Technology Publications.
chicago: Berns, Fabian, Markus Lange-Hegermann, and Christian Beecks. Towards
Gaussian Processes for Automatic and Interpretable Anomaly Detection in Industry
4.0. Edited by H. Panetto, K. Madani, and A. Smirnov. Proceedings of the
International Conference on Innovative Intelligent Industrial Production and Logistics
IN4PL - Volume 1. SCITEPRESS - Science and Technology Publications, 2020.
https://doi.org/10.5220/0010130300870092.
chicago-de: Berns, Fabian, Markus Lange-Hegermann und Christian Beecks. 2020. Towards
Gaussian Processes for Automatic and Interpretable Anomaly Detection in Industry
4.0. Hg. von H. Panetto, K. Madani, und A. Smirnov. Proceedings of the
International Conference on Innovative Intelligent Industrial Production and Logistics
IN4PL - Volume 1. SCITEPRESS - Science and Technology Publications. doi:10.5220/0010130300870092,
.
din1505-2-1: 'Berns, Fabian ; Lange-Hegermann, Markus ; Beecks,
Christian ; Panetto, H. ;
Madani, K. ; Smirnov,
A. (Hrsg.): Towards Gaussian Processes for Automatic and Interpretable
Anomaly Detection in Industry 4.0 : SCITEPRESS - Science and Technology Publications,
2020'
havard: F. Berns, M. Lange-Hegermann, C. Beecks, Towards Gaussian Processes for
Automatic and Interpretable Anomaly Detection in Industry 4.0, SCITEPRESS - Science
and Technology Publications, 2020.
ieee: 'F. Berns, M. Lange-Hegermann, and C. Beecks, Towards Gaussian Processes
for Automatic and Interpretable Anomaly Detection in Industry 4.0. SCITEPRESS
- Science and Technology Publications, 2020, pp. 87–92. doi: 10.5220/0010130300870092.'
mla: Berns, Fabian, et al. “Towards Gaussian Processes for Automatic and Interpretable
Anomaly Detection in Industry 4.0.” Proceedings of the International Conference
on Innovative Intelligent Industrial Production and Logistics IN4PL - Volume 1,
edited by H. Panetto et al., SCITEPRESS - Science and Technology Publications,
2020, pp. 87–92, https://doi.org/10.5220/0010130300870092.
short: F. Berns, M. Lange-Hegermann, C. Beecks, Towards Gaussian Processes for Automatic
and Interpretable Anomaly Detection in Industry 4.0, SCITEPRESS - Science and
Technology Publications, 2020.
ufg: 'Berns, Fabian/Lange-Hegermann, Markus/Beecks, Christian: Towards Gaussian
Processes for Automatic and Interpretable Anomaly Detection in Industry 4.0, hg.
von Panetto, H./Madani, K./Smirnov, A., o. O. 2020.'
van: Berns F, Lange-Hegermann M, Beecks C. Towards Gaussian Processes for Automatic
and Interpretable Anomaly Detection in Industry 4.0. Panetto H, Madani K, Smirnov
A, editors. Proceedings of the International Conference on Innovative Intelligent
Industrial Production and Logistics IN4PL - Volume 1. SCITEPRESS - Science and
Technology Publications; 2020.
conference:
end_date: 2020-11-04
location: Budapest, HUNGARY
name: International Conference on Innovative Intelligent Industrial Production and
Logistics (IN4PL)
start_date: 2020-11-02
date_created: 2025-04-17T06:20:07Z
date_updated: 2025-06-26T13:31:38Z
department:
- _id: DEP5000
doi: 10.5220/0010130300870092
editor:
- first_name: H.
full_name: Panetto, H.
last_name: Panetto
- first_name: K.
full_name: Madani, K.
last_name: Madani
- first_name: A.
full_name: Smirnov, A.
last_name: Smirnov
keyword:
- Anomaly Detection
- Gaussian Processes
- Explainable Machine Learning
- Industry 4.0
language:
- iso: eng
page: 87-92
publication: ' Proceedings of the International Conference on Innovative Intelligent
Industrial Production and Logistics IN4PL - Volume 1'
publication_identifier:
isbn:
- 978-989-758-476-3
publication_status: published
publisher: SCITEPRESS - Science and Technology Publications
status: public
title: Towards Gaussian Processes for Automatic and Interpretable Anomaly Detection
in Industry 4.0
type: conference_editor_article
user_id: '83781'
year: '2020'
...
---
_id: '4311'
abstract:
- lang: eng
text: Recent trends towards digitization in the industrial domain are also driving
profound socio-technical changes. On the one hand, these technologies enable shorter
product lifecycles and servitization, but on the other hand, the increasing technical
complexity of the equipment makes its operation and maintenance a challenge for
workers. Assistance systems using pervasive technologies can bridge the gap between
the abilities of the workers and the demands of handling technical complexity
by enriching workplace activities with relevant, context-dependent information.
In this paper, we present an application that replaces a conventional, paper-based
maintenance manual with digital, Augmented Reality based instructions that are
delivered at the appropriate place and time.
author:
- first_name: Hitesh
full_name: Dhiman, Hitesh
id: '71767'
last_name: Dhiman
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Dhiman H, Röcker C. Worker Assistance in Smart Production Environments using
Pervasive Technologies. In: 2019 IEEE International Conference on Pervasive
Computing and Communications Workshops (PerCom Workshops). Piscataway, NJ:
IEEE; 2019:95-100. doi:10.1109/PERCOMW.2019.8730771'
apa: 'Dhiman, H., & Röcker, C. (2019). Worker Assistance in Smart Production
Environments using Pervasive Technologies. In 2019 IEEE International Conference
on Pervasive Computing and Communications Workshops (PerCom Workshops) (pp.
95–100). Piscataway, NJ: IEEE. https://doi.org/10.1109/PERCOMW.2019.8730771'
bjps: 'Dhiman H and Röcker C (2019) Worker Assistance in Smart Production
Environments Using Pervasive Technologies. 2019 IEEE International Conference
on Pervasive Computing and Communications Workshops (PerCom Workshops). Piscataway,
NJ: IEEE, pp. 95–100.'
chicago: 'Dhiman, Hitesh, and Carsten Röcker. “Worker Assistance in Smart Production
Environments Using Pervasive Technologies.” In 2019 IEEE International Conference
on Pervasive Computing and Communications Workshops (PerCom Workshops), 95–100.
Piscataway, NJ: IEEE, 2019. https://doi.org/10.1109/PERCOMW.2019.8730771.'
chicago-de: 'Dhiman, Hitesh und Carsten Röcker. 2019. Worker Assistance in Smart
Production Environments using Pervasive Technologies. In: 2019 IEEE International
Conference on Pervasive Computing and Communications Workshops (PerCom Workshops),
95–100. Piscataway, NJ: IEEE. doi:10.1109/PERCOMW.2019.8730771,
.'
din1505-2-1: 'Dhiman, Hitesh ; Röcker, Carsten: Worker Assistance in
Smart Production Environments using Pervasive Technologies. In: 2019 IEEE International
Conference on Pervasive Computing and Communications Workshops (PerCom Workshops).
Piscataway, NJ : IEEE, 2019, S. 95–100'
havard: 'H. Dhiman, C. Röcker, Worker Assistance in Smart Production Environments
using Pervasive Technologies, in: 2019 IEEE International Conference on Pervasive
Computing and Communications Workshops (PerCom Workshops), IEEE, Piscataway, NJ,
2019: pp. 95–100.'
ieee: 'H. Dhiman and C. Röcker, “Worker Assistance in Smart Production Environments
using Pervasive Technologies,” in 2019 IEEE International Conference on Pervasive
Computing and Communications Workshops (PerCom Workshops), Piscataway, NJ:
IEEE, 2019, pp. 95–100.'
mla: Dhiman, Hitesh, and Carsten Röcker. “Worker Assistance in Smart Production
Environments Using Pervasive Technologies.” 2019 IEEE International Conference
on Pervasive Computing and Communications Workshops (PerCom Workshops), IEEE,
2019, pp. 95–100, doi:10.1109/PERCOMW.2019.8730771.
short: 'H. Dhiman, C. Röcker, in: 2019 IEEE International Conference on Pervasive
Computing and Communications Workshops (PerCom Workshops), IEEE, Piscataway, NJ,
2019, pp. 95–100.'
ufg: 'Dhiman, Hitesh/Röcker, Carsten (2019): Worker Assistance in Smart Production
Environments using Pervasive Technologies, in: 2019 IEEE International Conference
on Pervasive Computing and Communications Workshops (PerCom Workshops), Piscataway,
NJ, S. 95–100.'
van: 'Dhiman H, Röcker C. Worker Assistance in Smart Production Environments using
Pervasive Technologies. In: 2019 IEEE International Conference on Pervasive Computing
and Communications Workshops (PerCom Workshops). Piscataway, NJ: IEEE; 2019. p.
95–100.'
conference:
end_date: 2019-03-15
location: Kyoto, Japan
name: '2019 IEEE International Conference on Pervasive Computing and Communications '
start_date: 2019-03-11
date_created: 2021-01-06T13:59:08Z
date_updated: 2023-03-15T13:49:51Z
department:
- _id: DEP5023
doi: 10.1109/PERCOMW.2019.8730771
keyword:
- Industry 4.0
- Cyber Physical Systems
- Augmented Reality
- Complexity
- Maintenance
- HoloLens
language:
- iso: eng
page: 95 - 100
place: Piscataway, NJ
publication: 2019 IEEE International Conference on Pervasive Computing and Communications
Workshops (PerCom Workshops)
publication_identifier:
isbn:
- 978-1-5386-9151-9
publication_status: published
publisher: IEEE
status: public
title: Worker Assistance in Smart Production Environments using Pervasive Technologies
type: book_chapter
user_id: '15514'
year: 2019
...
---
_id: '4321'
abstract:
- lang: eng
text: Recent research has shown that computer-based Assistive Technology (AT) has
the potential to support individuals with disabilities in production environments.
At the same time, step-by-step instructions enable workers to be successful in
their performance of industrial tasks that were formerly difficult to accomplish.
We merged these two types of intervention and developed an application running
on a mobile device that can assist disabled workers working more independently.
In an evaluation study, we investigated how our assistive system affects the task
efficiency as well as participants’ subjective evaluation. Results show advantages
when using the assistive prototype with regard to users’ task efficiency and subjective
evaluations.
author:
- first_name: Volkan
full_name: Aksu, Volkan
last_name: Aksu
- first_name: Sascha
full_name: Jenderny, Sascha
last_name: Jenderny
- first_name: Sascha
full_name: Martinez, Sascha
last_name: Martinez
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Aksu V, Jenderny S, Martinez S, Röcker C. Providing Context-Sensitive Mobile
Assistance for People with Disabilities in the Workplace. In: Di Bucchianico G,
ed. Providing Context-Sensitive Mobile Assistance for People with Disabilities
in the Workplace. Vol 776. Advances in Intelligent Systems and Computing.
Cham: Springer; 2018:3-14. doi:10.1007/978-3-319-94622-1_1'
apa: 'Aksu, V., Jenderny, S., Martinez, S., & Röcker, C. (2018). Providing Context-Sensitive
Mobile Assistance for People with Disabilities in the Workplace. In G. Di Bucchianico
(Ed.), Providing Context-Sensitive Mobile Assistance for People with Disabilities
in the Workplace (Vol. 776, pp. 3–14). Cham: Springer. https://doi.org/10.1007/978-3-319-94622-1_1'
bjps: 'Aksu V et al. (2018) Providing Context-Sensitive Mobile Assistance
for People with Disabilities in the Workplace. In Di Bucchianico G (ed.), Providing
Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace,
vol. 776. Cham: Springer, pp. 3–14.'
chicago: 'Aksu, Volkan, Sascha Jenderny, Sascha Martinez, and Carsten Röcker. “Providing
Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace.”
In Providing Context-Sensitive Mobile Assistance for People with Disabilities
in the Workplace, edited by Giuseppe Di Bucchianico, 776:3–14. Advances in
Intelligent Systems and Computing. Cham: Springer, 2018. https://doi.org/10.1007/978-3-319-94622-1_1.'
chicago-de: 'Aksu, Volkan, Sascha Jenderny, Sascha Martinez und Carsten Röcker.
2018. Providing Context-Sensitive Mobile Assistance for People with Disabilities
in the Workplace. In: Providing Context-Sensitive Mobile Assistance for People
with Disabilities in the Workplace, hg. von Giuseppe Di Bucchianico, 776:3–14.
Advances in Intelligent Systems and Computing. Cham: Springer. doi:10.1007/978-3-319-94622-1_1,
.'
din1505-2-1: 'Aksu, Volkan ; Jenderny, Sascha ; Martinez,
Sascha ; Röcker, Carsten:
Providing Context-Sensitive Mobile Assistance for People with Disabilities in
the Workplace. In: Di Bucchianico, G.
(Hrsg.): Providing Context-Sensitive Mobile Assistance for People with Disabilities
in the Workplace, Advances in Intelligent Systems and Computing. Bd.
776. Cham : Springer, 2018, S. 3–14'
havard: 'V. Aksu, S. Jenderny, S. Martinez, C. Röcker, Providing Context-Sensitive
Mobile Assistance for People with Disabilities in the Workplace, in: G. Di Bucchianico
(Ed.), Providing Context-Sensitive Mobile Assistance for People with Disabilities
in the Workplace, Springer, Cham, 2018: pp. 3–14.'
ieee: V. Aksu, S. Jenderny, S. Martinez, and C. Röcker, “Providing Context-Sensitive
Mobile Assistance for People with Disabilities in the Workplace,” in Providing
Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace,
Orlando, Florida, USA, 2018, vol. 776, pp. 3–14.
mla: Aksu, Volkan, et al. “Providing Context-Sensitive Mobile Assistance for People
with Disabilities in the Workplace.” Providing Context-Sensitive Mobile Assistance
for People with Disabilities in the Workplace, edited by Giuseppe Di Bucchianico,
vol. 776, Springer, 2018, pp. 3–14, doi:10.1007/978-3-319-94622-1_1.
short: 'V. Aksu, S. Jenderny, S. Martinez, C. Röcker, in: G. Di Bucchianico (Ed.),
Providing Context-Sensitive Mobile Assistance for People with Disabilities in
the Workplace, Springer, Cham, 2018, pp. 3–14.'
ufg: 'Aksu, Volkan et. al. (2018): Providing Context-Sensitive Mobile Assistance
for People with Disabilities in the Workplace, in: Giuseppe Di Bucchianico (Hg.):
Providing Context-Sensitive Mobile Assistance for People with Disabilities
in the Workplace (=Advances in Intelligent Systems and Computing 776),
Cham, S. 3–14.'
van: 'Aksu V, Jenderny S, Martinez S, Röcker C. Providing Context-Sensitive Mobile
Assistance for People with Disabilities in the Workplace. In: Di Bucchianico G,
editor. Providing Context-Sensitive Mobile Assistance for People with Disabilities
in the Workplace. Cham: Springer; 2018. p. 3–14. (Advances in Intelligent Systems
and Computing; vol. 776).'
conference:
end_date: 2018-07-25
location: Orlando, Florida, USA
name: 2018 International Conference on Advanced Production Management and Process
Control ; AHFE 2018
start_date: 201-07-21
date_created: 2021-01-08T08:26:22Z
date_updated: 2023-03-15T13:49:52Z
department:
- _id: DEP5023
doi: 10.1007/978-3-319-94622-1_1
editor:
- first_name: 'Giuseppe '
full_name: 'Di Bucchianico, Giuseppe '
last_name: Di Bucchianico
intvolume: ' 776'
keyword:
- Assistive technology
- 'People with disabilities : Human computer interaction : Industry 4.0'
- Inclusion
- Context-sensitive assistance
- Step-by-step instructions
- Production
- Mobile assistance
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 3-14
place: Cham
publication: Providing Context-Sensitive Mobile Assistance for People with Disabilities
in the Workplace
publication_identifier:
eisbn:
- 978-3-319-94622-1
isbn:
- 978-3-319-94621-4
publication_status: published
publisher: Springer
series_title: Advances in Intelligent Systems and Computing
status: public
title: Providing Context-Sensitive Mobile Assistance for People with Disabilities
in the Workplace
type: conference
user_id: '15514'
volume: 776
year: 2018
...
---
_id: '238'
abstract:
- lang: eng
text: "In future, advancing digitalization will entail extensive change for businesses.
To date, there are only sporadically implemented examples of Smart Factories and
these are rather technically (specifically information technology) oriented. Phoenix
Contact therefore decided to use a tailor-made approach to implement the digital
transition towards becoming a Smart Factory. With the participation of the senior
management affected, other internal support areas and the works council, an image
of the future for the Smart Factory was developed. Based on the main future processes
the appropriate organizational structure was selected and all participants could
now be trained in the performance of new tasks. In addition, this allows for technological
concepts to be chosen and judiciously incorporated in further stages. In this
paper, the “SmartOrg@Combicon” project will be illustrated as the initial phase
in the course of Smart Factory implementation.\r\n"
author:
- first_name: P.
full_name: Dobrzanski, P.
last_name: Dobrzanski
- first_name: Wilfried
full_name: Jungkind, Wilfried
id: '14059'
last_name: Jungkind
citation:
ama: 'Dobrzanski P, Jungkind W. Human Resources and Organizational Development in
the Context of Industry 4.0. In: Villmer F-J, Padoano E, Department of Production
Engineering and Management, eds. Production Engineering and Management.
Lemgo; 2018:147-158.'
apa: Dobrzanski, P., & Jungkind, W. (2018). Human Resources and Organizational
Development in the Context of Industry 4.0. In F.-J. Villmer, E. Padoano, &
Department of Production Engineering and Management (Eds.), Production engineering
and management (pp. 147–158). Lemgo.
bjps: Dobrzanski P and Jungkind W (2018) Human Resources and Organizational
Development in the Context of Industry 4.0. In Villmer F-J, Padoano E and Department
of Production Engineering and Management (eds), Production Engineering and
Management. Lemgo, pp. 147–158.
chicago: Dobrzanski, P., and Wilfried Jungkind. “Human Resources and Organizational
Development in the Context of Industry 4.0.” In Production Engineering and
Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of
Production Engineering and Management, 147–58. Lemgo, 2018.
chicago-de: 'Dobrzanski, P. und Wilfried Jungkind. 2018. Human Resources and Organizational
Development in the Context of Industry 4.0. In: Production engineering and
management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production
Engineering and Management, 147–158. Lemgo.'
din1505-2-1: 'Dobrzanski, P. ; Jungkind, Wilfried: Human Resources and
Organizational Development in the Context of Industry 4.0. In: Villmer,
F.-J. ; Padoano, E. ; Department of Production Engineering and Management
(Hrsg.): Production engineering and management. Lemgo, 2018, S. 147–158'
havard: 'P. Dobrzanski, W. Jungkind, Human Resources and Organizational Development
in the Context of Industry 4.0, in: F.-J. Villmer, E. Padoano, Department of Production
Engineering and Management (Eds.), Production Engineering and Management, Lemgo,
2018: pp. 147–158.'
ieee: P. Dobrzanski and W. Jungkind, “Human Resources and Organizational Development
in the Context of Industry 4.0,” in Production engineering and management,
Lemgo, 2018, no. 1, pp. 147–158.
mla: Dobrzanski, P., and Wilfried Jungkind. “Human Resources and Organizational
Development in the Context of Industry 4.0.” Production Engineering and Management,
edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 147–58.
short: 'P. Dobrzanski, W. Jungkind, in: F.-J. Villmer, E. Padoano, Department of
Production Engineering and Management (Eds.), Production Engineering and Management,
Lemgo, 2018, pp. 147–158.'
ufg: 'Dobrzanski, P./Jungkind, Wilfried (2018): Human Resources and Organizational
Development in the Context of Industry 4.0, in: Franz-Josef Villmer et. al. (Hgg.):
Production engineering and management, Lemgo, S. 147–158.'
van: 'Dobrzanski P, Jungkind W. Human Resources and Organizational Development in
the Context of Industry 4.0. In: Villmer F-J, Padoano E, Department of Production
Engineering and Management, editors. Production engineering and management. Lemgo;
2018. p. 147–58.'
conference:
end_date: 2018-10-05
location: Lemgo
name: Proceedings 8 th International Conference
start_date: 2018-10-04
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2018-11-16T12:12:37Z
date_updated: 2023-03-15T13:49:39Z
department:
- _id: DEP7020
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
issue: '1'
keyword:
- Industry 4.0
- Smart Factory
- Digital transformation
- Staff and organizational development
language:
- iso: eng
page: 147-158
place: Lemgo
publication: Production engineering and management
publication_identifier:
isbn:
- 978-3-946856-03-0
publication_status: published
status: public
title: Human Resources and Organizational Development in the Context of Industry 4.0
type: conference
user_id: '74004'
year: 2018
...
---
_id: '4259'
abstract:
- lang: eng
text: This paper presents a prototype of an intelligent assistive system for workers
in stationary manual assembly using projection-based augmented reality (AR) and
intelligent hand tracking. By using depth cameras, the system can track the hands
of the user and makes the user aware of wrong picking actions or errors in the
assembly process. The system automatically adapts the digital projection-based
overlay according to the current work situation. The main research contribution
of our work is the presentation of a novel hand-tracking algorithm. In addition,
we present the results of an user study of the system that shows the challenges
and opportunities of our system and the hand-tracking algorithm in particular.
We assume that our results will inform the future design of assistive systems
in manual assembly.
author:
- first_name: Sebastian
full_name: Büttner, Sebastian
id: '61868'
last_name: Büttner
- first_name: Oliver
full_name: Sand, Oliver
last_name: Sand
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Büttner S, Sand O, Röcker C. Exploring Design Opportunities for Intelligent
Worker Assistance: A New Approach Using Projetion-Based AR and a Novel Hand-Tracking
Algorithm. In: European Conference on Ambient Intelligence. Vol 10217. Lecture
Notes in Computer Science . Cham: Springer; 2017:33-45. doi:10.1007/978-3-319-56997-0_3'
apa: 'Büttner, S., Sand, O., & Röcker, C. (2017). Exploring Design Opportunities
for Intelligent Worker Assistance: A New Approach Using Projetion-Based AR and
a Novel Hand-Tracking Algorithm. In European Conference on Ambient Intelligence
(Vol. 10217, pp. 33–45). Cham: Springer. https://doi.org/10.1007/978-3-319-56997-0_3'
bjps: 'Büttner S, Sand O and Röcker C (2017) Exploring Design Opportunities
for Intelligent Worker Assistance: A New Approach Using Projetion-Based AR and
a Novel Hand-Tracking Algorithm. European Conference on Ambient Intelligence,
vol. 10217. Cham: Springer, pp. 33–45.'
chicago: 'Büttner, Sebastian, Oliver Sand, and Carsten Röcker. “Exploring Design
Opportunities for Intelligent Worker Assistance: A New Approach Using Projetion-Based
AR and a Novel Hand-Tracking Algorithm.” In European Conference on Ambient
Intelligence, 10217:33–45. Lecture Notes in Computer Science . Cham: Springer,
2017. https://doi.org/10.1007/978-3-319-56997-0_3.'
chicago-de: 'Büttner, Sebastian, Oliver Sand und Carsten Röcker. 2017. Exploring
Design Opportunities for Intelligent Worker Assistance: A New Approach Using Projetion-Based
AR and a Novel Hand-Tracking Algorithm. In: European Conference on Ambient
Intelligence, 10217:33–45. Lecture Notes in Computer Science . Cham: Springer.
doi:10.1007/978-3-319-56997-0_3,
.'
din1505-2-1: 'Büttner, Sebastian ;
Sand, Oliver ; Röcker,
Carsten: Exploring Design Opportunities for Intelligent Worker Assistance:
A New Approach Using Projetion-Based AR and a Novel Hand-Tracking Algorithm. In:
European Conference on Ambient Intelligence, Lecture Notes in Computer
Science . Bd. 10217. Cham : Springer, 2017, S. 33–45'
havard: 'S. Büttner, O. Sand, C. Röcker, Exploring Design Opportunities for Intelligent
Worker Assistance: A New Approach Using Projetion-Based AR and a Novel Hand-Tracking
Algorithm, in: European Conference on Ambient Intelligence, Springer, Cham, 2017:
pp. 33–45.'
ieee: 'S. Büttner, O. Sand, and C. Röcker, “Exploring Design Opportunities for Intelligent
Worker Assistance: A New Approach Using Projetion-Based AR and a Novel Hand-Tracking
Algorithm,” in European Conference on Ambient Intelligence, Malaga, Spain,
2017, vol. 10217, pp. 33–45.'
mla: 'Büttner, Sebastian, et al. “Exploring Design Opportunities for Intelligent
Worker Assistance: A New Approach Using Projetion-Based AR and a Novel Hand-Tracking
Algorithm.” European Conference on Ambient Intelligence, vol. 10217, Springer,
2017, pp. 33–45, doi:10.1007/978-3-319-56997-0_3.'
short: 'S. Büttner, O. Sand, C. Röcker, in: European Conference on Ambient Intelligence,
Springer, Cham, 2017, pp. 33–45.'
ufg: 'Büttner, Sebastian et. al. (2017): Exploring Design Opportunities for
Intelligent Worker Assistance: A New Approach Using Projetion-Based AR and a Novel
Hand-Tracking Algorithm, in: European Conference on Ambient Intelligence
(= Lecture Notes in Computer Science 10217), Cham, S. 33–45.'
van: 'Büttner S, Sand O, Röcker C. Exploring Design Opportunities for Intelligent
Worker Assistance: A New Approach Using Projetion-Based AR and a Novel Hand-Tracking
Algorithm. In: European Conference on Ambient Intelligence. Cham: Springer; 2017.
p. 33–45. ( Lecture Notes in Computer Science ; vol. 10217).'
conference:
end_date: 2017-04-28
location: ' Malaga, Spain'
name: 13. European Conference on Ambient Intelligence
start_date: 2017-04-26
date_created: 2020-12-10T13:40:11Z
date_updated: 2023-03-15T13:49:51Z
department:
- _id: DEP5023
doi: 10.1007/978-3-319-56997-0_3
intvolume: ' 10217'
keyword:
- Augmented reality
- Mobile projection
- Hand tracking
- Manufacturing
- Industry 4.0
language:
- iso: eng
page: 33-45
place: Cham
publication: European Conference on Ambient Intelligence
publication_identifier:
eisbn:
- 978-3-319-56997-0
isbn:
- 978-3-319-56996-3
publication_status: published
publisher: Springer
series_title: ' Lecture Notes in Computer Science '
status: public
title: 'Exploring Design Opportunities for Intelligent Worker Assistance: A New Approach
Using Projetion-Based AR and a Novel Hand-Tracking Algorithm'
type: conference
user_id: '15514'
volume: 10217
year: 2017
...
---
_id: '576'
abstract:
- lang: eng
text: Due to a high level of competition in automotive industry, it is essentially
important for automotive companies to develop innovative strategies and technologies
in production and logistics. Postponement of production difference, i.e., customer
individualized demand has been considered as an innovative strategy and more or
less implemented in the production process, mostly before and during the final
assembly. This paper proposed the concept of postponing the individualization
of some components after the assembly. The idea is to use the idle times especially
during the distribution process when vehicles are accumulated to generate big
transportation batches or the follow-up transport does not start immediately.
The individualization is carried out in specially realized workshops. Objectives
of the approach are to reduce variations in the manufacturing, to shorten delivery
times and to give consumers the ability to reorder individual components shortly
before delivery. This kind of postponement of individualization induces the requirement
of redesigning the logistics network, which means the selection of workshop locations
and the new selection of the suppliers for the individualized components. To reach
this aim, a software tool has been developed. In the tool, the data required in
the logistics network such as suppliers and workshop potential locations are managed
in a MySQL database and the optimization of the network is achieved by the especiallydeveloped
non-dominated sorting genetic algorithm-II (NSGA-II). The design and development
of the solution individuals and the fitness functions, which are the most important
elements of a genetic algorithm, are based on the mathematical model of the logistics
network design with product late individualization. Different scenarios are considered
and generated to examine the applicability of the methodology in automotive practice.
The optimization model and the heuristics of genetic algorithm are validated through
the Pareto solutions for different scenarios.
author:
- first_name: Li
full_name: Li, Li
id: '58482'
last_name: Li
citation:
ama: 'Li L. Optimization of Automotive Logistics Network with Late Product Individualization.
In: Padoano E, Villmer F-J, Department of Production Engineering and Management,
eds. Production Engineering and Management. Publication series in direct
digital manufacturing . Lemgo; 2017:139-150.'
apa: Li, L. (2017). Optimization of Automotive Logistics Network with Late Product
Individualization. In E. Padoano, F.-J. Villmer, & Department of Production
Engineering and Management (Eds.), Production Engineering and Management
(pp. 139–150). Lemgo.
bjps: Li L (2017) Optimization of Automotive Logistics Network with Late
Product Individualization. In Padoano E, Villmer F-J and Department of Production
Engineering and Management (eds), Production Engineering and Management.
Lemgo, pp. 139–150.
chicago: Li, Li. “Optimization of Automotive Logistics Network with Late Product
Individualization.” In Production Engineering and Management, edited by
Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and
Management, 139–50. Publication Series in Direct Digital Manufacturing . Lemgo,
2017.
chicago-de: 'Li, Li. 2017. Optimization of Automotive Logistics Network with Late
Product Individualization. In: Production Engineering and Management, hg.
von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering
and Management, 139–150. Publication series in direct digital manufacturing .
Lemgo.'
din1505-2-1: 'Li, Li: Optimization
of Automotive Logistics Network with Late Product Individualization. In: Padoano, E. ; Villmer,
F.-J. ; Department of Production
Engineering and Management (Hrsg.): Production Engineering and Management,
Publication series in direct digital manufacturing . Lemgo, 2017, S. 139–150'
havard: 'L. Li, Optimization of Automotive Logistics Network with Late Product Individualization,
in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management
(Eds.), Production Engineering and Management, Lemgo, 2017: pp. 139–150.'
ieee: L. Li, “Optimization of Automotive Logistics Network with Late Product Individualization,”
in Production Engineering and Management, Pordenone, Italy, 2017, no. 1,
pp. 139–150.
mla: Li, Li. “Optimization of Automotive Logistics Network with Late Product Individualization.”
Production Engineering and Management, edited by Elio Padoano et al., no.
1, 2017, pp. 139–50.
short: 'L. Li, in: E. Padoano, F.-J. Villmer, Department of Production Engineering
and Management (Eds.), Production Engineering and Management, Lemgo, 2017, pp.
139–150.'
ufg: 'Li, Li (2017): Optimization of Automotive Logistics Network with Late
Product Individualization, in: Elio Padoano et. al. (Hgg.): Production Engineering
and Management (=Publication series in direct digital manufacturing ),
Lemgo, S. 139–150.'
van: 'Li L. Optimization of Automotive Logistics Network with Late Product Individualization.
In: Padoano E, Villmer F-J, Department of Production Engineering and Management,
editors. Production Engineering and Management. Lemgo; 2017. p. 139–50. (Publication
series in direct digital manufacturing ).'
conference:
end_date: 2017-09-29
location: Pordenone, Italy
name: Proceedings7th International Conference
start_date: 2017-09-28
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-18T11:16:07Z
date_updated: 2023-03-15T13:50:01Z
department:
- _id: DEP7000
- _id: DEP1306
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
issue: '1'
keyword:
- Automotive industry
- Logistics network configuration
- Late product individualization
- Postponement
- NSGGA
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf
oa: '1'
page: 139-150
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-946856-01-6
publication_status: published
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf
series_title: 'Publication series in direct digital manufacturing '
status: public
title: Optimization of Automotive Logistics Network with Late Product Individualization
type: conference
user_id: '45673'
year: 2017
...
---
_id: '328'
abstract:
- lang: eng
text: "In this paper, concepts for an extended DC network for the main power
supply of components from various manufacturers in industrial production are presented.
In the first part, detailed requirements for such a network are given
\ from the viewpoint of a customer. Based on those, different concepts
for AC/DC conversion and energy management are discussed. As far as AC/DC conversion
\ is concerned, the advantages and drawbacks of several rectifier topologies
are listed, as they have a significant impact on the system behavior and
\ EMC properties. \r\nAn intelligent energy management can improve the
\ energy efficiency and reduce downtimes of a plant, which are major
requirements from a customer’s viewpoint. "
author:
- first_name: Holger
full_name: Borcherding, Holger
id: '1693'
last_name: Borcherding
- first_name: Johann
full_name: Austermann, Johann
id: '42114'
last_name: Austermann
- first_name: Timm
full_name: Kuhlmann, Timm
last_name: Kuhlmann
- first_name: Benno
full_name: Weis, Benno
last_name: Weis
- first_name: Andre
full_name: Leonide, Andre
last_name: Leonide
citation:
ama: 'Borcherding H, Austermann J, Kuhlmann T, Weis B, Leonide A. Concepts for a
DC Network in Industrial Production. In: Institute of Electrical and Electronics
Engineers (IEEE), ed. 2017 IEEE Second International Conference on DC Microgrids
(ICDCM). Danvers; 2017:227-234. doi:10.1109/ICDCM.2017.8001049'
apa: Borcherding, H., Austermann, J., Kuhlmann, T., Weis, B., & Leonide, A.
(2017). Concepts for a DC Network in Industrial Production. In Institute of Electrical
and Electronics Engineers (IEEE) (Ed.), 2017 IEEE Second International Conference
on DC Microgrids (ICDCM) (pp. 227–234). Danvers. https://doi.org/10.1109/ICDCM.2017.8001049
bjps: Borcherding H et al. (2017) Concepts for a DC Network in Industrial
Production. In Institute of Electrical and Electronics Engineers (IEEE) (ed.),
2017 IEEE Second International Conference on DC Microgrids (ICDCM). Danvers,
pp. 227–234.
chicago: Borcherding, Holger, Johann Austermann, Timm Kuhlmann, Benno Weis, and
Andre Leonide. “Concepts for a DC Network in Industrial Production.” In 2017
IEEE Second International Conference on DC Microgrids (ICDCM), edited by Institute
of Electrical and Electronics Engineers (IEEE), 227–34. Danvers, 2017. https://doi.org/10.1109/ICDCM.2017.8001049.
chicago-de: 'Borcherding, Holger, Johann Austermann, Timm Kuhlmann, Benno Weis und
Andre Leonide. 2017. Concepts for a DC Network in Industrial Production. In: 2017
IEEE Second International Conference on DC Microgrids (ICDCM), hg. von Institute
of Electrical and Electronics Engineers (IEEE), 227–234. Danvers. doi:10.1109/ICDCM.2017.8001049,
.'
din1505-2-1: 'Borcherding, Holger
; Austermann, Johann ; Kuhlmann,
Timm ; Weis, Benno ; Leonide, Andre: Concepts for a DC Network
in Industrial Production. In: Institute
of Electrical and Electronics Engineers (IEEE) (Hrsg.): 2017 IEEE Second
International Conference on DC Microgrids (ICDCM). Danvers, 2017, S. 227–234'
havard: 'H. Borcherding, J. Austermann, T. Kuhlmann, B. Weis, A. Leonide, Concepts
for a DC Network in Industrial Production, in: Institute of Electrical and Electronics
Engineers (IEEE) (Ed.), 2017 IEEE Second International Conference on DC Microgrids
(ICDCM), Danvers, 2017: pp. 227–234.'
ieee: H. Borcherding, J. Austermann, T. Kuhlmann, B. Weis, and A. Leonide, “Concepts
for a DC Network in Industrial Production,” in 2017 IEEE Second International
Conference on DC Microgrids (ICDCM), Nürnberg, 2017, no. 1, pp. 227–234.
mla: Borcherding, Holger, et al. “Concepts for a DC Network in Industrial Production.”
2017 IEEE Second International Conference on DC Microgrids (ICDCM), edited
by Institute of Electrical and Electronics Engineers (IEEE), no. 1, 2017, pp.
227–34, doi:10.1109/ICDCM.2017.8001049.
short: 'H. Borcherding, J. Austermann, T. Kuhlmann, B. Weis, A. Leonide, in: Institute
of Electrical and Electronics Engineers (IEEE) (Ed.), 2017 IEEE Second International
Conference on DC Microgrids (ICDCM), Danvers, 2017, pp. 227–234.'
ufg: 'Borcherding, Holger et. al. (2017): Concepts for a DC Network in Industrial
Production, in: Institute of Electrical and Electronics Engineers (IEEE) (Hg.):
2017 IEEE Second International Conference on DC Microgrids (ICDCM), Danvers,
S. 227–234.'
van: 'Borcherding H, Austermann J, Kuhlmann T, Weis B, Leonide A. Concepts for a
DC Network in Industrial Production. In: Institute of Electrical and Electronics
Engineers (IEEE), editor. 2017 IEEE Second International Conference on DC Microgrids
(ICDCM). Danvers; 2017. p. 227–34.'
conference:
end_date: 2017-06-29
location: Nürnberg
name: 'IEEE Second International Conference on DC Microgrids (ICDCM) '
start_date: 2017-06-27
corporate_editor:
- Institute of Electrical and Electronics Engineers (IEEE)
date_created: 2018-12-10T15:11:18Z
date_updated: 2023-03-15T13:49:46Z
department:
- _id: DEP5018
doi: 10.1109/ICDCM.2017.8001049
issue: '1'
keyword:
- AC-DC power convertors
- electromagnetic compatibility
- energy conservation
- energy management systems
- rectifiers
- main power supply
- industrial production
- DC network
- AC-DC conversion
- rectifier topologies
- EMC properties
- intelligent energy management
- energy efficiency improvement
- downtime reduction
- Rectifiers
- Switches
- Voltage control
- Topology
- Network topology
- Production
- Grounding
- industrial DC grid
- SMART Grid
language:
- iso: eng
main_file_link:
- url: https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8001049
page: 227-234
place: Danvers
publication: 2017 IEEE Second International Conference on DC Microgrids (ICDCM)
related_material:
link:
- relation: contains
url: https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8001049
status: public
title: Concepts for a DC Network in Industrial Production
type: conference
user_id: '45673'
year: 2017
...
---
_id: '4299'
abstract:
- lang: eng
text: With the advances of technology, intelligent assistive systems that adapt
to individual humans will become feasible. However, application areas of such
systems are rarely discussed within the Industry 4.0 community. Most assistive
systems that have been presented have been developed for specific task, such as
assembly support or warehouse picking, but there might be a huge uncovered design
space to be explored. With this work, we want to step back from existing systems
and analyze the design opportunities of assistive systems especially for small
and medium-size enterprises (SME). To achieve this goal we conducted a study in
four SME, consisting of observations and interviews. Here we present our findings
about the potential future application areas of human-centered assistive systems.
author:
- first_name: Henrik
full_name: Mucha, Henrik
id: '64896'
last_name: Mucha
- first_name: Sebastian
full_name: Büttner, Sebastian
id: '61868'
last_name: Büttner
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Mucha H, Büttner S, Röcker C. Application Areas for Human-Centered Assistive
Systems. In: Fraunhofer IGD , ed. Human-Computer Interaction – Perspectives
on Industry 4.0. Workshop at i-KNOW 2016 . Graz, Österreich: TU; 2016.'
apa: 'Mucha, H., Büttner, S., & Röcker, C. (2016). Application Areas for Human-Centered
Assistive Systems. In Fraunhofer IGD (Ed.), Human-Computer Interaction – Perspectives
on Industry 4.0. Workshop at i-KNOW 2016 . Graz, Österreich: TU.'
bjps: 'Mucha H, Büttner S and Röcker C (2016) Application Areas for Human-Centered
Assistive Systems. In Fraunhofer IGD (ed.), Human-Computer Interaction – Perspectives
on Industry 4.0. Workshop at i-KNOW 2016 . Graz, Österreich: TU.'
chicago: 'Mucha, Henrik, Sebastian Büttner, and Carsten Röcker. “Application Areas
for Human-Centered Assistive Systems.” In Human-Computer Interaction – Perspectives
on Industry 4.0. Workshop at i-KNOW 2016 , edited by Fraunhofer IGD . Graz,
Österreich: TU, 2016.'
chicago-de: 'Mucha, Henrik, Sebastian Büttner und Carsten Röcker. 2016. Application
Areas for Human-Centered Assistive Systems. In: Human-Computer Interaction
– Perspectives on Industry 4.0. Workshop at i-KNOW 2016 , hg. von Fraunhofer
IGD . Graz, Österreich: TU.'
din1505-2-1: 'Mucha, Henrik ; Büttner, Sebastian ; Röcker,
Carsten: Application Areas for Human-Centered Assistive Systems. In: Fraunhofer IGD (Hrsg.): Human-Computer
Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 . Graz,
Österreich : TU, 2016'
havard: 'H. Mucha, S. Büttner, C. Röcker, Application Areas for Human-Centered Assistive
Systems, in: Fraunhofer IGD (Ed.), Human-Computer Interaction – Perspectives
on Industry 4.0. Workshop at i-KNOW 2016 , TU, Graz, Österreich, 2016.'
ieee: H. Mucha, S. Büttner, and C. Röcker, “Application Areas for Human-Centered
Assistive Systems,” in Human-Computer Interaction – Perspectives on Industry
4.0. Workshop at i-KNOW 2016 , Graz, Austria, 2016.
mla: Mucha, Henrik, et al. “Application Areas for Human-Centered Assistive Systems.”
Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW
2016 , edited by Fraunhofer IGD , TU, 2016.
short: 'H. Mucha, S. Büttner, C. Röcker, in: Fraunhofer IGD (Ed.), Human-Computer
Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016 , TU, Graz,
Österreich, 2016.'
ufg: 'Mucha, Henrik et. al. (2016): Application Areas for Human-Centered
Assistive Systems, in: Fraunhofer IGD (Hg.): Human-Computer Interaction –
Perspectives on Industry 4.0. Workshop at i-KNOW 2016 , Graz, Österreich.'
van: 'Mucha H, Büttner S, Röcker C. Application Areas for Human-Centered Assistive
Systems. In: Fraunhofer IGD , editor. Human-Computer Interaction – Perspectives
on Industry 40 Workshop at i-KNOW 2016 . Graz, Österreich: TU; 2016.'
conference:
end_date: 2016-10-19
location: Graz, Austria
name: Human-Computer Interaction – Perspectives on Industry 4.0. Workshop
start_date: 201610-18
corporate_editor:
- 'Fraunhofer IGD '
date_created: 2020-12-22T14:11:02Z
date_updated: 2023-03-15T13:49:51Z
department:
- _id: DEP5023
keyword:
- Industry 4.0
- Assistive Systems
- Small and Medium-Sized Enterprises
- SME
- Human-Centered Design
- Human-Computer Interaction for Industry
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
place: Graz, Österreich
publication: 'Human-Computer Interaction – Perspectives on Industry 4.0. Workshop
at i-KNOW 2016 '
publication_status: published
publisher: TU
related_material:
link:
- relation: original
url: https://www.th-owl.de/init/uploads/tx_initdb/HCII40_2016_paper_3__7___002_.pdf
status: public
title: Application Areas for Human-Centered Assistive Systems
type: conference
user_id: '15514'
year: 2016
...
---
_id: '4300'
abstract:
- lang: eng
text: 'Human-centered design methods are nowadays widely used in the design of consumer
products. These methods aim at designing products with a high usability and a
positive user experience (UX). However, in the domain of the design of industrial
machines, design is often driven by functional requirements mostly neglecting
the usability and user experience of products. Together with a medium-sized manufacturer
of industrial laundry machines we applied the human-centered design process in
an industrial context. In this field report, we describe the human-centered design
methods applied in the project, the adaptations we had to make in the process
and the challenges and opportunities for applying human-centered design in an
industrial environment in general. '
author:
- first_name: Sebastian
full_name: Büttner, Sebastian
id: '61868'
last_name: Büttner
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Büttner S, Röcker C. Applying Human-Centered Design Methods in Industry –
a Field Report. In: Fraunhofer IGD , ed. Human-Computer Interaction – Perspectives
on Industry 4.0. Workshop at i-KNOW 2016. Graz, Österreich: TU; 2016.'
apa: 'Büttner, S., & Röcker, C. (2016). Applying Human-Centered Design Methods
in Industry – a Field Report. In Fraunhofer IGD (Ed.), Human-Computer Interaction
– Perspectives on Industry 4.0. Workshop at i-KNOW 2016. Graz, Österreich:
TU.'
bjps: 'Büttner S and Röcker C (2016) Applying Human-Centered Design Methods
in Industry – a Field Report. In Fraunhofer IGD (ed.), Human-Computer Interaction
– Perspectives on Industry 4.0. Workshop at i-KNOW 2016. Graz, Österreich:
TU.'
chicago: 'Büttner, Sebastian, and Carsten Röcker. “Applying Human-Centered Design
Methods in Industry – a Field Report.” In Human-Computer Interaction – Perspectives
on Industry 4.0. Workshop at i-KNOW 2016, edited by Fraunhofer IGD . Graz,
Österreich: TU, 2016.'
chicago-de: 'Büttner, Sebastian und Carsten Röcker. 2016. Applying Human-Centered
Design Methods in Industry – a Field Report. In: Human-Computer Interaction
– Perspectives on Industry 4.0. Workshop at i-KNOW 2016, hg. von Fraunhofer
IGD . Graz, Österreich: TU.'
din1505-2-1: 'Büttner, Sebastian ;
Röcker, Carsten: Applying Human-Centered
Design Methods in Industry – a Field Report. In: Fraunhofer
IGD (Hrsg.): Human-Computer Interaction – Perspectives on Industry
4.0. Workshop at i-KNOW 2016. Graz, Österreich : TU, 2016'
havard: 'S. Büttner, C. Röcker, Applying Human-Centered Design Methods in Industry
– a Field Report, in: Fraunhofer IGD (Ed.), Human-Computer Interaction – Perspectives
on Industry 4.0. Workshop at i-KNOW 2016, TU, Graz, Österreich, 2016.'
ieee: S. Büttner and C. Röcker, “Applying Human-Centered Design Methods in Industry
– a Field Report,” in Human-Computer Interaction – Perspectives on Industry
4.0. Workshop at i-KNOW 2016, Graz, Austria, 2016.
mla: Büttner, Sebastian, and Carsten Röcker. “Applying Human-Centered Design Methods
in Industry – a Field Report.” Human-Computer Interaction – Perspectives on
Industry 4.0. Workshop at i-KNOW 2016, edited by Fraunhofer IGD , TU, 2016.
short: 'S. Büttner, C. Röcker, in: Fraunhofer IGD (Ed.), Human-Computer Interaction
– Perspectives on Industry 4.0. Workshop at i-KNOW 2016, TU, Graz, Österreich,
2016.'
ufg: 'Büttner, Sebastian/Röcker, Carsten (2016): Applying Human-Centered
Design Methods in Industry – a Field Report, in: Fraunhofer IGD (Hg.): Human-Computer
Interaction – Perspectives on Industry 4.0. Workshop at i-KNOW 2016, Graz,
Österreich.'
van: 'Büttner S, Röcker C. Applying Human-Centered Design Methods in Industry –
a Field Report. In: Fraunhofer IGD , editor. Human-Computer Interaction – Perspectives
on Industry 40 Workshop at i-KNOW 2016. Graz, Österreich: TU; 2016.'
conference:
end_date: 2016-10-19
location: Graz, Austria
name: Human-Computer Interaction – Perspectives on Industry 4.0. Workshop
start_date: 201610-18
corporate_editor:
- 'Fraunhofer IGD '
date_created: 2020-12-22T14:11:03Z
date_updated: 2023-03-15T13:49:51Z
department:
- _id: DEP5023
keyword:
- Design Methods
- Human-Centered Design
- Industrial Human-Computer Interaction
- Industry 4.0
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
place: Graz, Österreich
publication: Human-Computer Interaction – Perspectives on Industry 4.0. Workshop at
i-KNOW 2016
publication_status: published
publisher: TU
related_material:
link:
- relation: original
url: https://www.th-owl.de/init/uploads/tx_initdb/HCII40_2016_paper_3__7___002_.pdf
status: public
title: Applying Human-Centered Design Methods in Industry – a Field Report
type: conference
user_id: '15514'
year: 2016
...
---
_id: '10169'
abstract:
- lang: eng
text: The reduction of wires and connections is a fundamental necessity for upcoming
industrial 4.0 solutions, requiring a large amount of reconfigurability and flexibility.
Our research focuses on recent ways of combining energy and data transmission
in single contactless transducers, enabling easy installation, maintenance and
possible fulfilment of high protection classes. While this approach can typically
be solved by combining Wifi and inductive energy transfer, the Wifi aspect is
often limited by the available media access and channel occupation. Another issue
is the real time capability of Wifi or other wireless transmission protocols like
IEEE 802.15.4. While creating a new wireless or contactless standard is beyond
the focus of this work, we concentrate on combining existing technologies and
their interoperability. This includes powerline communication systems, near field
data transmission and inductive energy transfer mechanisms.
author:
- first_name: Derk
full_name: Wesemann, Derk
id: '1273'
last_name: Wesemann
- first_name: Stefan
full_name: Witte, Stefan
id: '1605'
last_name: Witte
- first_name: Andreas
full_name: Schmelter, Andreas
id: '10982'
last_name: Schmelter
- first_name: Roland
full_name: Heß, Roland
last_name: Heß
citation:
ama: 'Wesemann D, Witte S, Schmelter A, Heß R. Flexible Factory Automation: Potentials
of Contactless Transmission Systems, Combining State-of-the-Art Technologies.
IEEE; 2016. doi:10.1109/WFCS.2016.7496533'
apa: 'Wesemann, D., Witte, S., Schmelter, A., & Heß, R. (2016). Flexible factory
automation: Potentials of contactless transmission systems, combining state-of-the-art
technologies. In Communication in automation : 2016 IEEE World Conference on
Factory Communication Systems (WFCS)$dMay 3-6, 2016, Aveiro, Portugal. IEEE
World Conference on Factory Communication Systems (WFCS), Aveiro, Portugal. IEEE.
https://doi.org/10.1109/WFCS.2016.7496533'
bjps: 'Wesemann D et al. (2016) Flexible Factory Automation: Potentials
of Contactless Transmission Systems, Combining State-of-the-Art Technologies.
Piscataway, NJ : IEEE.'
chicago: 'Wesemann, Derk, Stefan Witte, Andreas Schmelter, and Roland Heß. Flexible
Factory Automation: Potentials of Contactless Transmission Systems, Combining
State-of-the-Art Technologies. Communication in Automation : 2016 IEEE
World Conference on Factory Communication Systems (WFCS)$dMay 3-6, 2016, Aveiro,
Portugal. Piscataway, NJ : IEEE, 2016. https://doi.org/10.1109/WFCS.2016.7496533.'
chicago-de: 'Wesemann, Derk, Stefan Witte, Andreas Schmelter und Roland Heß. 2016.
Flexible factory automation: Potentials of contactless transmission systems,
combining state-of-the-art technologies. Communication in automation :
2016 IEEE World Conference on Factory Communication Systems (WFCS)$dMay 3-6, 2016,
Aveiro, Portugal. Piscataway, NJ : IEEE. doi:10.1109/WFCS.2016.7496533,
.'
din1505-2-1: 'Wesemann, Derk ; Witte, Stefan ; Schmelter,
Andreas ; Heß, Roland: Flexible
factory automation: Potentials of contactless transmission systems, combining
state-of-the-art technologies. Piscataway, NJ : IEEE, 2016'
havard: 'D. Wesemann, S. Witte, A. Schmelter, R. Heß, Flexible factory automation:
Potentials of contactless transmission systems, combining state-of-the-art technologies,
IEEE, Piscataway, NJ , 2016.'
ieee: 'D. Wesemann, S. Witte, A. Schmelter, and R. Heß, Flexible factory automation:
Potentials of contactless transmission systems, combining state-of-the-art technologies.
Piscataway, NJ : IEEE, 2016. doi: 10.1109/WFCS.2016.7496533.'
mla: 'Wesemann, Derk, et al. “Flexible Factory Automation: Potentials of Contactless
Transmission Systems, Combining State-of-the-Art Technologies.” Communication
in Automation : 2016 IEEE World Conference on Factory Communication Systems (WFCS)$dMay
3-6, 2016, Aveiro, Portugal, IEEE, 2016, https://doi.org/10.1109/WFCS.2016.7496533.'
short: 'D. Wesemann, S. Witte, A. Schmelter, R. Heß, Flexible Factory Automation:
Potentials of Contactless Transmission Systems, Combining State-of-the-Art Technologies,
IEEE, Piscataway, NJ , 2016.'
ufg: 'Wesemann, Derk u. a.: Flexible factory automation: Potentials of contactless
transmission systems, combining state-of-the-art technologies, Piscataway, NJ 2016.'
van: 'Wesemann D, Witte S, Schmelter A, Heß R. Flexible factory automation: Potentials
of contactless transmission systems, combining state-of-the-art technologies.
Communication in automation : 2016 IEEE World Conference on Factory Communication
Systems (WFCS)$dMay 3-6, 2016, Aveiro, Portugal. Piscataway, NJ : IEEE; 2016.'
conference:
end_date: 2016-05-06
location: Aveiro, Portugal
name: IEEE World Conference on Factory Communication Systems (WFCS)
start_date: 2016-05-03
date_created: 2023-07-27T11:13:52Z
date_updated: 2023-07-28T12:28:27Z
department:
- _id: DEP5000
- _id: DEP5023
doi: 10.1109/WFCS.2016.7496533
keyword:
- Automation
- Industry 4.0
- Contactless Data Transmission
- Contactless Energy Transmission
- Wireless Communication
language:
- iso: eng
place: 'Piscataway, NJ '
publication: 'Communication in automation : 2016 IEEE World Conference on Factory
Communication Systems (WFCS)$dMay 3-6, 2016, Aveiro, Portugal'
publication_identifier:
isbn:
- ' 978-1-5090-2339-4 '
publication_status: published
publisher: IEEE
status: public
title: 'Flexible factory automation: Potentials of contactless transmission systems,
combining state-of-the-art technologies'
type: conference_editor_article
user_id: '83781'
year: '2016'
...
---
_id: '273'
abstract:
- lang: eng
text: This paper introduces an efficient modular solution kit for intralogistic
drives, which reduces the total energy consumption of all drives in an automated
warehouse by more than 15%. The reduction of energy consumption results from the
interaction of optimized components (motors, control techniques and regeneration
units), which are described in detail in this paper. Different motor concepts
like the induction motor, the synchronous reluctance motor and the permanent magnet
synchronous machine are compared according to the special requirements for intralogistics
applications. Different control techniques are presented in order to achieve sensorless
and efficient-optimal operation of these motors. The sensorless control technique
uses signal injection to detect the rotor position sufficiently exact also in
case of speed near standstill. Efficient-optimal operation is achieved by reducing
the motor current with regard to the torque (MTPA-control). Furthermore this paper
introduces a regeneration unit that can be connected between the DC link of frequency
inverters and the mains to feed back regenerative energy. The regeneration unit
consisting of a buck converter, a synchronous inverter and a line-filter can work
in parallel to commonly used uncontrolled rectifiers. Its functioning is shown
with the help of measurement results of a 1kW laboratory prototype. The last section
shows a demonstrator in which a conventional conveyer system (with induction motor
and braking resistor) is compared with an optimized one using the presented components.
Power versus time measurements show specific energy savings resulting from the
interaction of the optimized components.
author:
- first_name: Johann
full_name: Austermann, Johann
id: '42114'
last_name: Austermann
- first_name: Holger
full_name: Borcherding, Holger
id: '1693'
last_name: Borcherding
- first_name: H.
full_name: Stichweh, H.
last_name: Stichweh
- first_name: Volker
full_name: Grabs, Volker
id: '58951'
last_name: Grabs
citation:
ama: 'Austermann J, Borcherding H, Stichweh H, Grabs V. High Efficient Modular Drive
System - An Ideal Approach for Green Intralogistics Applications. In: 2016
18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe).
Berlin ; Offenbach: VDE Verlag; 2016:1639-1646. doi:10.1109/EPE.2016.7695687'
apa: 'Austermann, J., Borcherding, H., Stichweh, H., & Grabs, V. (2016). High
Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications.
In 2016 18th European Conference on Power Electronics and Applications (EPE’16
ECCE Europe) (pp. 1639–1646). Berlin ; Offenbach: VDE Verlag. https://doi.org/10.1109/EPE.2016.7695687'
bjps: 'Austermann J et al. (2016) High Efficient Modular Drive System
- An Ideal Approach for Green Intralogistics Applications. 2016 18th European
Conference on Power Electronics and Applications (EPE’16 ECCE Europe). Berlin ;
Offenbach: VDE Verlag, pp. 1639–1646.'
chicago: 'Austermann, Johann, Holger Borcherding, H. Stichweh, and Volker Grabs.
“High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics
Applications.” In 2016 18th European Conference on Power Electronics and Applications
(EPE’16 ECCE Europe), 1639–46. Berlin ; Offenbach: VDE Verlag, 2016. https://doi.org/10.1109/EPE.2016.7695687.'
chicago-de: 'Austermann, Johann, Holger Borcherding, H. Stichweh und Volker Grabs.
2016. High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics
Applications. In: 2016 18th European Conference on Power Electronics and Applications
(EPE’16 ECCE Europe), 1639–1646. Berlin ; Offenbach: VDE Verlag. doi:10.1109/EPE.2016.7695687,
.'
din1505-2-1: 'Austermann, Johann ;
Borcherding, Holger ; Stichweh,
H. ; Grabs, Volker: High
Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications.
In: 2016 18th European Conference on Power Electronics and Applications (EPE’16
ECCE Europe). Berlin ; Offenbach : VDE Verlag, 2016, S. 1639–1646'
havard: 'J. Austermann, H. Borcherding, H. Stichweh, V. Grabs, High Efficient Modular
Drive System - An Ideal Approach for Green Intralogistics Applications, in: 2016
18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe),
VDE Verlag, Berlin ; Offenbach, 2016: pp. 1639–1646.'
ieee: J. Austermann, H. Borcherding, H. Stichweh, and V. Grabs, “High Efficient
Modular Drive System - An Ideal Approach for Green Intralogistics Applications,”
in 2016 18th European Conference on Power Electronics and Applications (EPE’16
ECCE Europe), Karlsruhe, 2016, pp. 1639–1646.
mla: Austermann, Johann, et al. “High Efficient Modular Drive System - An Ideal
Approach for Green Intralogistics Applications.” 2016 18th European Conference
on Power Electronics and Applications (EPE’16 ECCE Europe), VDE Verlag, 2016,
pp. 1639–46, doi:10.1109/EPE.2016.7695687.
short: 'J. Austermann, H. Borcherding, H. Stichweh, V. Grabs, in: 2016 18th European
Conference on Power Electronics and Applications (EPE’16 ECCE Europe), VDE Verlag,
Berlin ; Offenbach, 2016, pp. 1639–1646.'
ufg: 'Austermann, Johann et. al. (2016): High Efficient Modular Drive System
- An Ideal Approach for Green Intralogistics Applications, in: 2016 18th European
Conference on Power Electronics and Applications (EPE’16 ECCE Europe), Berlin ;
Offenbach, S. 1639–1646.'
van: 'Austermann J, Borcherding H, Stichweh H, Grabs V. High Efficient Modular Drive
System - An Ideal Approach for Green Intralogistics Applications. In: 2016 18th
European Conference on Power Electronics and Applications (EPE’16 ECCE Europe).
Berlin ; Offenbach: VDE Verlag; 2016. p. 1639–46.'
conference:
end_date: 2016-05-09
location: Karlsruhe
name: 18th European Conference on Power Electronics and Applications
start_date: 2016-09-05
date_created: 2018-11-27T10:16:16Z
date_updated: 2023-03-15T13:49:42Z
ddc:
- '620'
department:
- _id: DEP5018
doi: 10.1109/EPE.2016.7695687
keyword:
- electric current control
- induction motors
- invertors
- permanent magnet motors
- reluctance motors
- sensorless machine control
- torque control
- modular solution kit
- intralogistic drives
- automated warehouse
- energy consumption reduction
- optimized components interaction
- induction motor
- synchronous reluctance motor
- permanent magnet synchronous machine
- sensorless control technique
- signal injection
- rotor position
- motor current
- MTPA-control
- regeneration unit
- DC link
- frequency inverters
- buck converter
- synchronous inverter
- line-filter
- Induction motors
- Reluctance motors
- Permanent magnet motors
- Rotors
- Torque
- Inverters
- intralogistics
- reluctance motor
- sensorless control
- regeneration unit
- braking energy
language:
- iso: eng
page: 1639-1646
place: Berlin ; Offenbach
publication: 2016 18th European Conference on Power Electronics and Applications (EPE'16
ECCE Europe)
publication_identifier:
isbn:
- 978-3-8007-4186-1
publisher: VDE Verlag
related_material:
link:
- relation: contains
url: https://ieeexplore.ieee.org/document/7695687
status: public
title: High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics
Applications
type: conference
user_id: '45673'
year: 2016
...
---
_id: '4330'
abstract:
- lang: eng
text: Catchwords such as “Cyber-Physical-Systems” and “Industry 4.0” describe the
current development of systems with embedded intelligence. These systems can be
characterized by an increasing technical complexity that must be addressed in
the user interface. In this paper we analyze the specific requirements posed by
the interaction with cyber-physical-systems, present a coordinated approach to
these requirements and illustrate our approach with a practical example of an
assistance system for assembly workers in an industrial production environment.
author:
- first_name: Volker
full_name: Paelke, Volker
last_name: Paelke
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Paelke V, Röcker C. User Interfaces for Cyber-Physical Systems: Challenges
and Possible Approaches. . In: Design, User Experience, and Usability: Design
Discourse. Vol 9186. Lecture Notes in Computer Science ; Information Systems
and Applications, incl. Internet/Web, and HCI. Springer; 2015:75-85. doi:10.1007/978-3-319-20886-2_8'
apa: 'Paelke, V., & Röcker, C. (2015). User Interfaces for Cyber-Physical Systems:
Challenges and Possible Approaches. . Design, User Experience, and Usability:
Design Discourse, 9186, 75–85. https://doi.org/10.1007/978-3-319-20886-2_8'
bjps: 'Paelke V and Röcker C (2015) User Interfaces for Cyber-Physical Systems:
Challenges and Possible Approaches. . Design, User Experience, and Usability:
Design Discourse, vol. 9186. Cham: Springer, pp. 75–85.'
chicago: 'Paelke, Volker, and Carsten Röcker. “User Interfaces for Cyber-Physical
Systems: Challenges and Possible Approaches. .” In Design, User Experience,
and Usability: Design Discourse, 9186:75–85. Lecture Notes in Computer Science ;
Information Systems and Applications, Incl. Internet/Web, and HCI. Cham: Springer,
2015. https://doi.org/10.1007/978-3-319-20886-2_8.'
chicago-de: 'Paelke, Volker und Carsten Röcker. 2015. User Interfaces for Cyber-Physical
Systems: Challenges and Possible Approaches. . In: Design, User Experience,
and Usability: Design Discourse, 9186:75–85. Lecture Notes in Computer Science ;
Information Systems and Applications, incl. Internet/Web, and HCI. Cham: Springer.
doi:10.1007/978-3-319-20886-2_8,
.'
din1505-2-1: 'Paelke, Volker ; Röcker, Carsten: User Interfaces for Cyber-Physical
Systems: Challenges and Possible Approaches. . In: Design, User Experience,
and Usability: Design Discourse, Lecture Notes in Computer Science ; Information
Systems and Applications, incl. Internet/Web, and HCI. Bd. 9186. Cham : Springer,
2015, S. 75–85'
havard: 'V. Paelke, C. Röcker, User Interfaces for Cyber-Physical Systems: Challenges
and Possible Approaches. , in: Design, User Experience, and Usability: Design
Discourse, Springer, Cham, 2015: pp. 75–85.'
ieee: 'V. Paelke and C. Röcker, “User Interfaces for Cyber-Physical Systems: Challenges
and Possible Approaches. ,” in Design, User Experience, and Usability: Design
Discourse, Los Angeles, CA, USA, 2015, vol. 9186, pp. 75–85. doi: 10.1007/978-3-319-20886-2_8.'
mla: 'Paelke, Volker, and Carsten Röcker. “User Interfaces for Cyber-Physical Systems:
Challenges and Possible Approaches. .” Design, User Experience, and Usability:
Design Discourse, vol. 9186, Springer, 2015, pp. 75–85, https://doi.org/10.1007/978-3-319-20886-2_8.'
short: 'V. Paelke, C. Röcker, in: Design, User Experience, and Usability: Design
Discourse, Springer, Cham, 2015, pp. 75–85.'
ufg: 'Paelke, Volker/Röcker, Carsten: User Interfaces for Cyber-Physical
Systems: Challenges and Possible Approaches. , in: o. Hg.: Design, User Experience,
and Usability: Design Discourse, Bd. 9186, Cham 2015 (Lecture Notes in Computer
Science ; Information Systems and Applications, incl. Internet/Web, and HCI),
S. 75–85.'
van: 'Paelke V, Röcker C. User Interfaces for Cyber-Physical Systems: Challenges
and Possible Approaches. . In: Design, User Experience, and Usability: Design
Discourse. Cham: Springer; 2015. p. 75–85. (Lecture Notes in Computer Science ;
Information Systems and Applications, incl. Internet/Web, and HCI; vol. 9186).'
conference:
end_date: 2015-08-07
location: Los Angeles, CA, USA
name: 4th International Conference, DUXU 2015, Held as Part of HCI International
2015
start_date: 2015-08-02
date_created: 2021-01-08T12:03:44Z
date_updated: 2025-04-11T09:03:04Z
department:
- _id: DEP5023
doi: 10.1007/978-3-319-20886-2_8
intvolume: ' 9186'
keyword:
- Industrial IT
- User-Centered design
- Usability
- User interfaces
- Cyber-Physical-Systems
- Industry 4.0
- Augmented reality
- Development processes and methods
language:
- iso: eng
page: '75-85 '
place: Cham
publication: 'Design, User Experience, and Usability: Design Discourse'
publication_identifier:
eisbn:
- 978-3-319-20886-2
isbn:
- 978-3-319-20885-5
publication_status: published
publisher: Springer
series_title: Lecture Notes in Computer Science ; Information Systems and Applications,
incl. Internet/Web, and HCI
status: public
title: 'User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. '
type: conference
user_id: '83781'
volume: 9186
year: '2015'
...
---
_id: '2271'
article_type: original
author:
- first_name: Korbinian
full_name: von Blanckenburg, Korbinian
id: '58841'
last_name: von Blanckenburg
- first_name: Alexander
full_name: Geist, Alexander
last_name: Geist
citation:
ama: 'von Blanckenburg K, Geist A. Detecting illegal activities: the case of cartels.
European Journal of Law and Economics. 2010;32(8):15-33. doi:10.1007/s10657-010-9167-x'
apa: 'von Blanckenburg, K., & Geist, A. (2010). Detecting illegal activities:
the case of cartels. European Journal of Law and Economics, 32(8),
15–33. https://doi.org/10.1007/s10657-010-9167-x'
bjps: 'von Blanckenburg K and Geist A (2010) Detecting Illegal Activities:
The Case of Cartels. European Journal of Law and Economics 32, 15–33.'
chicago: 'Blanckenburg, Korbinian von, and Alexander Geist. “Detecting Illegal Activities:
The Case of Cartels.” European Journal of Law and Economics 32, no. 8 (2010):
15–33. https://doi.org/10.1007/s10657-010-9167-x.'
chicago-de: 'von Blanckenburg, Korbinian und Alexander Geist. 2010. Detecting illegal
activities: the case of cartels. European Journal of Law and Economics
32, Nr. 8: 15–33. doi:10.1007/s10657-010-9167-x,
.'
din1505-2-1: 'von Blanckenburg, Korbinian
; Geist, Alexander: Detecting illegal
activities: the case of cartels. In: European Journal of Law and Economics
Bd. 32. New York, NY , Springer Science + Business Media (2010), Nr. 8, S. 15–33'
havard: 'K. von Blanckenburg, A. Geist, Detecting illegal activities: the case of
cartels, European Journal of Law and Economics. 32 (2010) 15–33.'
ieee: 'K. von Blanckenburg and A. Geist, “Detecting illegal activities: the case
of cartels,” European Journal of Law and Economics, vol. 32, no. 8, pp.
15–33, 2010.'
mla: 'von Blanckenburg, Korbinian, and Alexander Geist. “Detecting Illegal Activities:
The Case of Cartels.” European Journal of Law and Economics, vol. 32, no.
8, Springer Science + Business Media, 2010, pp. 15–33, doi:10.1007/s10657-010-9167-x.'
short: K. von Blanckenburg, A. Geist, European Journal of Law and Economics 32 (2010)
15–33.
ufg: 'von Blanckenburg, Korbinian/Geist, Alexander (2010): Detecting illegal
activities: the case of cartels, in: European Journal of Law and Economics
32 (8), S. 15–33.'
van: 'von Blanckenburg K, Geist A. Detecting illegal activities: the case of cartels.
European Journal of Law and Economics. 2010;32(8):15–33.'
date_created: 2020-05-04T09:14:40Z
date_updated: 2023-03-15T13:49:39Z
department:
- _id: DEP7034
doi: 10.1007/s10657-010-9167-x
intvolume: ' 32'
issue: '8'
keyword:
- Competition policy
- Workability of markets
- Industry studies
- Cartel detection
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://link.springer.com/article/10.1007%2Fs10657-010-9167-x
oa: '1'
page: 15-33
place: 'New York, NY '
publication: European Journal of Law and Economics
publication_identifier:
issn:
- 0929-1261
- 1572-9990
publication_status: published
publisher: Springer Science + Business Media
status: public
title: 'Detecting illegal activities: the case of cartels'
type: journal_article
user_id: '15514'
volume: 32
year: 2010
...
---
_id: '6760'
author:
- first_name: Korbinian
full_name: von Blanckenburg, Korbinian
id: '58841'
last_name: von Blanckenburg
- first_name: Alexander
full_name: Geist, Alexander
last_name: Geist
citation:
ama: von Blanckenburg K, Geist A. How Can a Cartel Be Detected? International
Advances in Economic Research. 2009;15(9):421-436. doi:10.1007/s11294-009-9235-6
apa: von Blanckenburg, K., & Geist, A. (2009). How Can a Cartel Be Detected?
International Advances in Economic Research, 15(9), 421–436. https://doi.org/10.1007/s11294-009-9235-6
bjps: von Blanckenburg K and Geist A (2009) How Can a Cartel Be Detected?
International Advances in Economic Research 15, 421–436.
chicago: 'Blanckenburg, Korbinian von, and Alexander Geist. “How Can a Cartel Be
Detected?” International Advances in Economic Research 15, no. 9 (2009):
421–36. https://doi.org/10.1007/s11294-009-9235-6.'
chicago-de: 'von Blanckenburg, Korbinian und Alexander Geist. 2009. How Can a Cartel
Be Detected? International Advances in Economic Research 15, Nr. 9: 421–436.
doi:10.1007/s11294-009-9235-6,
.'
din1505-2-1: 'von Blanckenburg, Korbinian
; Geist, Alexander: How Can a Cartel
Be Detected? In: International Advances in Economic Research Bd. 15. Dordrecht
, Springer (2009), Nr. 9, S. 421–436'
havard: K. von Blanckenburg, A. Geist, How Can a Cartel Be Detected?, International
Advances in Economic Research. 15 (2009) 421–436.
ieee: K. von Blanckenburg and A. Geist, “How Can a Cartel Be Detected?,” International
Advances in Economic Research, vol. 15, no. 9, pp. 421–436, 2009.
mla: von Blanckenburg, Korbinian, and Alexander Geist. “How Can a Cartel Be Detected?”
International Advances in Economic Research, vol. 15, no. 9, Springer,
2009, pp. 421–36, doi:10.1007/s11294-009-9235-6.
short: K. von Blanckenburg, A. Geist, International Advances in Economic Research
15 (2009) 421–436.
ufg: 'von Blanckenburg, Korbinian/Geist, Alexander (2009): How Can a Cartel
Be Detected?, in: International Advances in Economic Research 15
(9), S. 421–436.'
van: von Blanckenburg K, Geist A. How Can a Cartel Be Detected? International Advances
in Economic Research. 2009;15(9):421–36.
date_created: 2021-11-18T14:50:00Z
date_updated: 2023-03-15T13:50:07Z
doi: 10.1007/s11294-009-9235-6
intvolume: ' 15'
issue: '9'
keyword:
- Competition policy
- Workability of markets
- Industry studies
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://link.springer.com/article/10.1007%2Fs11294-009-9235-6
oa: '1'
page: 421-436
place: 'Dordrecht '
publication: International Advances in Economic Research
publication_identifier:
eissn:
- 1573-966X
issn:
- 1083-0898
publication_status: published
publisher: Springer
status: public
title: How Can a Cartel Be Detected?
type: journal_article
user_id: '15514'
volume: 15
year: 2009
...