[{"publication_identifier":{"issn":["0026-2714"]},"abstract":[{"text":"A new acceleration model for the reliability prediction of electrical connectors has recently been published. This model enables the evaluation of failure rates gained in highly accelerated life tests (HALT) and considers thermal and vibrational loading. However, since the initial study only covered a small set of test parameters, further study of the model is required. Previous studies have sufficiently investigated the influence of the vibration test mode on the failure rate of electrical connectors. Therefore, this study now focuses on the influence of the thermal cycling test. A commonly used automotive connector is chosen and subjected to stresses in HALT covering various upper temperatures, test durations and thermal cycling frequencies. Additionally, the principles of determining the coefficient of temperature difference and the coefficient of the thermal cycling frequency are presented, since these coefficients are connector specific and required for the acceleration model. Based on the numbers of failures in test, the influence of the various thermal cycling tests is discussed, and the coefficients are calculated for the chosen connector. In conclusion a guideline to select an appropriate upper temperature and test duration in order to compare the reliability of different electrical connectors is provided.","lang":"eng"}],"publisher":"Elsevier","date_updated":"2024-08-05T07:33:56Z","publication":"Microelectronics reliability : an internat. journal & world abstracting service","year":"2022","language":[{"iso":"eng"}],"date_created":"2022-12-11T13:17:29Z","author":[{"id":"76831","full_name":"Krüger, Kevin","first_name":"Kevin","last_name":"Krüger"},{"last_name":"Song","first_name":"Jian","id":"5297","full_name":"Song, Jian"}],"publication_status":"published","keyword":["Electrical connectors","Life test","Thermal cycling","Upper temperature Duration","Temperature difference","Cycling frequency"],"volume":138,"article_number":"114633","_id":"9207","type":"scientific_journal_article","status":"public","intvolume":"       138","department":[{"_id":"DEP6012"}],"place":"Amsterdam","user_id":"83781","issue":"November 2022","title":"The influence of thermal cycling test parameters on the failure rate of electrical connectors","doi":"https://doi.org/10.1016/j.microrel.2022.114633","citation":{"van":"Krüger K, Song J. The influence of thermal cycling test parameters on the failure rate of electrical connectors. Microelectronics reliability : an internat journal &#38; world abstracting service. 2022;138(November 2022).","short":"K. Krüger, J. Song, Microelectronics Reliability : An Internat. Journal &#38; World Abstracting Service 138 (2022).","havard":"K. Krüger, J. Song, The influence of thermal cycling test parameters on the failure rate of electrical connectors, Microelectronics Reliability : An Internat. Journal &#38; World Abstracting Service. 138 (2022).","ufg":"<b>Krüger, Kevin/Song, Jian</b>: The influence of thermal cycling test parameters on the failure rate of electrical connectors, in: <i>Microelectronics reliability : an internat. journal &#38; world abstracting service</i> 138 (2022), H. November 2022.","mla":"Krüger, Kevin, and Jian Song. “The Influence of Thermal Cycling Test Parameters on the Failure Rate of Electrical Connectors.” <i>Microelectronics Reliability : An Internat. Journal &#38; World Abstracting Service</i>, vol. 138, no. November 2022, 114633, 2022, <a href=\"https://doi.org/10.1016/j.microrel.2022.114633\">https://doi.org/10.1016/j.microrel.2022.114633</a>.","din1505-2-1":"<span style=\"font-variant:small-caps;\">Krüger, Kevin</span> ; <span style=\"font-variant:small-caps;\">Song, Jian</span>: The influence of thermal cycling test parameters on the failure rate of electrical connectors. In: <i>Microelectronics reliability : an internat. journal &#38; world abstracting service</i> Bd. 138. Amsterdam, Elsevier (2022), Nr. November 2022","bjps":"<b>Krüger K and Song J</b> (2022) The Influence of Thermal Cycling Test Parameters on the Failure Rate of Electrical Connectors. <i>Microelectronics reliability : an internat. journal &#38; world abstracting service</i> <b>138</b>.","apa":"Krüger, K., &#38; Song, J. (2022). The influence of thermal cycling test parameters on the failure rate of electrical connectors. <i>Microelectronics Reliability : An Internat. Journal &#38; World Abstracting Service</i>, <i>138</i>(November 2022), Article 114633. <a href=\"https://doi.org/10.1016/j.microrel.2022.114633\">https://doi.org/10.1016/j.microrel.2022.114633</a>","ieee":"K. Krüger and J. Song, “The influence of thermal cycling test parameters on the failure rate of electrical connectors,” <i>Microelectronics reliability : an internat. journal &#38; world abstracting service</i>, vol. 138, no. November 2022, Art. no. 114633, 2022, doi: <a href=\"https://doi.org/10.1016/j.microrel.2022.114633\">https://doi.org/10.1016/j.microrel.2022.114633</a>.","chicago":"Krüger, Kevin, and Jian Song. “The Influence of Thermal Cycling Test Parameters on the Failure Rate of Electrical Connectors.” <i>Microelectronics Reliability : An Internat. Journal &#38; World Abstracting Service</i> 138, no. November 2022 (2022). <a href=\"https://doi.org/10.1016/j.microrel.2022.114633\">https://doi.org/10.1016/j.microrel.2022.114633</a>.","chicago-de":"Krüger, Kevin und Jian Song. 2022. The influence of thermal cycling test parameters on the failure rate of electrical connectors. <i>Microelectronics reliability : an internat. journal &#38; world abstracting service</i> 138, Nr. November 2022. doi:<a href=\"https://doi.org/10.1016/j.microrel.2022.114633\">https://doi.org/10.1016/j.microrel.2022.114633</a>, .","ama":"Krüger K, Song J. The influence of thermal cycling test parameters on the failure rate of electrical connectors. <i>Microelectronics reliability : an internat journal &#38; world abstracting service</i>. 2022;138(November 2022). doi:<a href=\"https://doi.org/10.1016/j.microrel.2022.114633\">https://doi.org/10.1016/j.microrel.2022.114633</a>"}},{"publisher":"Elsevier BV","date_updated":"2024-12-09T11:24:12Z","publication":"Water research : a journal of the International Water Association","extern":"1","publication_identifier":{"issn":["0043-1354"],"eissn":["1879-2448"]},"abstract":[{"lang":"eng","text":"In temperate lakes, it is generally assumed that light rather than temperature constrains phytoplankton growth in winter. Rapid winter warming and increasing observations of winter blooms warrant more investigation of these controls. We investigated the mechanisms regulating a massive winter diatom bloom in a temperate lake. High frequency data and process-based lake modeling demonstrated that phytoplankton growth in winter was dually controlled by light and temperature, rather than by light alone. Water temperature played a further indirect role in initiating the bloom through ice-thaw, which increased light exposure. The bloom was ultimately terminated by silicon limitation and sedimentation. These mechanisms differ from those typically responsible for spring diatom blooms and contributed to the high peak biomass. Our findings show that phytoplankton growth in winter is more sensitive to temperature, and consequently to climate change, than previously assumed. This has implications for nutrient cycling and seasonal succession of lake phytoplankton communities. The present study exemplifies the strength in integrating data analysis with different temporal resolutions and lake modeling. The new lake ecological model serves as an effective tool in analyzing and predicting winter phytoplankton dynamics for temperate lakes."}],"author":[{"last_name":"Kong","first_name":"Xiangzhen","full_name":"Kong, Xiangzhen"},{"first_name":"Michael","full_name":"Seewald, Michael","last_name":"Seewald"},{"full_name":"Dadi, Tallent","first_name":"Tallent","last_name":"Dadi"},{"full_name":"Friese, Kurt","first_name":"Kurt","last_name":"Friese"},{"first_name":"Chenxi","full_name":"Mi, Chenxi","last_name":"Mi"},{"first_name":"Bertram","full_name":"Boehrer, Bertram","last_name":"Boehrer"},{"last_name":"Schultze","first_name":"Martin","full_name":"Schultze, Martin"},{"full_name":"Rinke, Karsten","first_name":"Karsten","last_name":"Rinke"},{"first_name":"Tom","orcid":"0000-0002-4520-7916","full_name":"Shatwell, Tom","id":"86424","last_name":"Shatwell"}],"date_created":"2024-12-08T20:19:54Z","keyword":["Winter diatom bloom","High frequency monitoring","Lake modeling","Light limitation","Temperature"],"publication_status":"published","volume":190,"year":"2020","quality_controlled":"1","main_file_link":[{"url":"https://doi.org/10.1016/j.watres.2020.116681"}],"language":[{"iso":"eng"}],"_id":"12231","type":"scientific_journal_article","article_number":"116681","title":"Unravelling winter diatom blooms in temperate lakes using high frequency data and ecological modeling","doi":"10.1016/j.watres.2020.116681","citation":{"havard":"X. Kong, M. Seewald, T. Dadi, K. Friese, C. Mi, B. Boehrer, M. Schultze, K. Rinke, T. Shatwell, Unravelling winter diatom blooms in temperate lakes using high frequency data and ecological modeling, Water Research : A Journal of the International Water Association. 190 (2020).","van":"Kong X, Seewald M, Dadi T, Friese K, Mi C, Boehrer B, et al. Unravelling winter diatom blooms in temperate lakes using high frequency data and ecological modeling. Water research : a journal of the International Water Association. 2020;190.","din1505-2-1":"<span style=\"font-variant:small-caps;\"><span style=\"font-variant:small-caps;\">Kong, Xiangzhen</span> ; <span style=\"font-variant:small-caps;\">Seewald, Michael</span> ; <span style=\"font-variant:small-caps;\">Dadi, Tallent</span> ; <span style=\"font-variant:small-caps;\">Friese, Kurt</span> ; <span style=\"font-variant:small-caps;\">Mi, Chenxi</span> ; <span style=\"font-variant:small-caps;\">Boehrer, Bertram</span> ; <span style=\"font-variant:small-caps;\">Schultze, Martin</span> ; <span style=\"font-variant:small-caps;\">Rinke, Karsten</span> ; u. a.</span>: Unravelling winter diatom blooms in temperate lakes using high frequency data and ecological modeling. In: <i>Water research : a journal of the International Water Association</i> Bd. 190. Amsterdam, Elsevier BV (2020)","bjps":"<b>Kong X <i>et al.</i></b> (2020) Unravelling Winter Diatom Blooms in Temperate Lakes Using High Frequency Data and Ecological Modeling. <i>Water research : a journal of the International Water Association</i> <b>190</b>.","chicago-de":"Kong, Xiangzhen, Michael Seewald, Tallent Dadi, Kurt Friese, Chenxi Mi, Bertram Boehrer, Martin Schultze, Karsten Rinke und Tom Shatwell. 2020. Unravelling winter diatom blooms in temperate lakes using high frequency data and ecological modeling. <i>Water research : a journal of the International Water Association</i> 190. doi:<a href=\"https://doi.org/10.1016/j.watres.2020.116681\">10.1016/j.watres.2020.116681</a>, .","chicago":"Kong, Xiangzhen, Michael Seewald, Tallent Dadi, Kurt Friese, Chenxi Mi, Bertram Boehrer, Martin Schultze, Karsten Rinke, and Tom Shatwell. “Unravelling Winter Diatom Blooms in Temperate Lakes Using High Frequency Data and Ecological Modeling.” <i>Water Research : A Journal of the International Water Association</i> 190 (2020). <a href=\"https://doi.org/10.1016/j.watres.2020.116681\">https://doi.org/10.1016/j.watres.2020.116681</a>.","ufg":"<b>Kong, Xiangzhen u. a.</b>: Unravelling winter diatom blooms in temperate lakes using high frequency data and ecological modeling, in: <i>Water research : a journal of the International Water Association</i> 190 (2020).","short":"X. Kong, M. Seewald, T. Dadi, K. Friese, C. Mi, B. Boehrer, M. Schultze, K. Rinke, T. Shatwell, Water Research : A Journal of the International Water Association 190 (2020).","mla":"Kong, Xiangzhen, et al. “Unravelling Winter Diatom Blooms in Temperate Lakes Using High Frequency Data and Ecological Modeling.” <i>Water Research : A Journal of the International Water Association</i>, vol. 190, 116681, 2020, <a href=\"https://doi.org/10.1016/j.watres.2020.116681\">https://doi.org/10.1016/j.watres.2020.116681</a>.","ieee":"X. Kong <i>et al.</i>, “Unravelling winter diatom blooms in temperate lakes using high frequency data and ecological modeling,” <i>Water research : a journal of the International Water Association</i>, vol. 190, Art. no. 116681, 2020, doi: <a href=\"https://doi.org/10.1016/j.watres.2020.116681\">10.1016/j.watres.2020.116681</a>.","apa":"Kong, X., Seewald, M., Dadi, T., Friese, K., Mi, C., Boehrer, B., Schultze, M., Rinke, K., &#38; Shatwell, T. (2020). Unravelling winter diatom blooms in temperate lakes using high frequency data and ecological modeling. <i>Water Research : A Journal of the International Water Association</i>, <i>190</i>, Article 116681. <a href=\"https://doi.org/10.1016/j.watres.2020.116681\">https://doi.org/10.1016/j.watres.2020.116681</a>","ama":"Kong X, Seewald M, Dadi T, et al. Unravelling winter diatom blooms in temperate lakes using high frequency data and ecological modeling. <i>Water research : a journal of the International Water Association</i>. 2020;190. doi:<a href=\"https://doi.org/10.1016/j.watres.2020.116681\">10.1016/j.watres.2020.116681</a>"},"status":"public","intvolume":"       190","department":[{"_id":"DEP8022"}],"user_id":"83781","place":"Amsterdam"},{"publication_status":"published","keyword":["Correlation","Wireless communication","Real-time systems","Logic gates","Frequency measurement","Libraries","Time measurement"],"file":[{"access_level":"open_access","relation":"main_file","file_id":"2373","success":1,"date_updated":"2020-05-18T15:08:45Z","file_name":"1805.01236v1.pdf","creator":"zph-yh1","content_type":"application/pdf","date_created":"2020-05-18T15:08:45Z","file_size":574858}],"date_created":"2020-05-18T15:07:56Z","author":[{"first_name":"Niels Hendrik","full_name":"Fliedner, Niels Hendrik","last_name":"Fliedner"},{"last_name":"Block","full_name":"Block, Dimitri","first_name":"Dimitri"},{"full_name":"Meier, Uwe","first_name":"Uwe","last_name":"Meier"}],"language":[{"iso":"eng"}],"year":2018,"main_file_link":[{"open_access":"1","url":"https://arxiv.org/abs/1805.01236"}],"date_updated":"2023-03-15T13:49:39Z","publication":"arXiv:1805.01236","ddc":["620"],"abstract":[{"text":"Novel industrial wireless applications require wideband, real-time channel\r\ncharacterization due to complex multipath propagation. Rapid machine motion\r\nleads to fast time variance of the channel's reflective behavior, which must be\r\ncaptured for radio channel characterization. Additionally, inhomogeneous radio\r\nchannels demand highly flexible measurements. Existing approaches for radio\r\nchannel measurements either lack flexibility or wide-band, real-time\r\nperformance with fast time variance. In this paper, we propose a correlative\r\nchannel sounding approach utilizing a software-defined architecture. The\r\napproach enables real-time, wide-band measurements with fast time variance\r\nimmune to active interference. The desired performance is validated with a\r\ndemanding industrial application example.","lang":"eng"}],"oa":"1","file_date_updated":"2020-05-18T15:08:45Z","title":"A Software-Defined Channel Sounder for Industrial Environments with Fast  Time Variance","citation":{"mla":"Fliedner, Niels Hendrik, et al. “A Software-Defined Channel Sounder for Industrial Environments with Fast  Time Variance.” <i>ArXiv:1805.01236</i>, 2018.","short":"N.H. Fliedner, D. Block, U. Meier, ArXiv:1805.01236 (2018).","ufg":"<b>Fliedner, Niels Hendrik et. al. (2018)</b>: A Software-Defined Channel Sounder for Industrial Environments with Fast  Time Variance.","ama":"Fliedner NH, Block D, Meier U. A Software-Defined Channel Sounder for Industrial Environments with Fast  Time Variance. <i>arXiv:180501236</i>. 2018.","ieee":"N. H. Fliedner, D. Block, and U. Meier, “A Software-Defined Channel Sounder for Industrial Environments with Fast  Time Variance,” <i>arXiv:1805.01236</i>. 2018.","apa":"Fliedner, N. H., Block, D., &#38; Meier, U. (2018). A Software-Defined Channel Sounder for Industrial Environments with Fast  Time Variance. <i>ArXiv:1805.01236</i>.","din1505-2-1":"<span style=\"font-variant:small-caps;\">Fliedner, Niels Hendrik</span> ; <span style=\"font-variant:small-caps;\">Block, Dimitri</span> ; <span style=\"font-variant:small-caps;\">Meier, Uwe</span>: A Software-Defined Channel Sounder for Industrial Environments with Fast  Time Variance. In: <i>arXiv:1805.01236</i> (2018)","havard":"N.H. Fliedner, D. Block, U. Meier, A Software-Defined Channel Sounder for Industrial Environments with Fast  Time Variance, ArXiv:1805.01236. (2018).","van":"Fliedner NH, Block D, Meier U. A Software-Defined Channel Sounder for Industrial Environments with Fast  Time Variance. arXiv:1805.01236. 2018.","chicago-de":"Fliedner, Niels Hendrik, Dimitri Block und Uwe Meier. 2018. A Software-Defined Channel Sounder for Industrial Environments with Fast  Time Variance. <i>arXiv:1805.01236</i>.","chicago":"Fliedner, Niels Hendrik, Dimitri Block, and Uwe Meier. “A Software-Defined Channel Sounder for Industrial Environments with Fast  Time Variance.” <i>ArXiv:1805.01236</i>, 2018.","bjps":"<b>Fliedner NH, Block D and Meier U</b> (2018) A Software-Defined Channel Sounder for Industrial Environments with Fast  Time Variance. <i>arXiv:1805.01236</i>."},"has_accepted_license":"1","user_id":"57956","status":"public","page":"6","_id":"2372","type":"preprint"},{"status":"public","year":2018,"quality_controlled":"1","department":[{"_id":"DEP5000"}],"main_file_link":[{"url":"https://ieeexplore.ieee.org/document/8491207"}],"user_id":"57956","language":[{"iso":"eng"}],"conference":{"location":"Lisbon, Portugal","name":"2018 15th International Symposium on Wireless Communication Systems (ISWCS)","end_date":"2018-08-31","start_date":"2018-08-28"},"author":[{"last_name":"Fliedner","first_name":"Niels Hendrik","full_name":"Fliedner, Niels Hendrik"},{"full_name":"Block, Dimitri","first_name":"Dimitri","last_name":"Block"},{"last_name":"Meier","full_name":"Meier, Uwe","first_name":"Uwe"}],"date_created":"2020-05-18T15:14:53Z","publication_status":"published","title":"A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance","keyword":["Correlation","Wireless communication","Real-time systems","Logic gates","Frequency measurement","Libraries","Time measurement"],"citation":{"ufg":"<b>Fliedner, Niels Hendrik et. al. (2018)</b>: A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance, in: <i>2018 15th International Symposium on Wireless Communication Systems (ISWCS)</i>.","havard":"N.H. Fliedner, D. Block, U. Meier, A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance, in: 2018 15th International Symposium on Wireless Communication Systems (ISWCS), 2018.","van":"Fliedner NH, Block D, Meier U. A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance. In: 2018 15th International Symposium on Wireless Communication Systems (ISWCS). 2018.","short":"N.H. Fliedner, D. Block, U. Meier, in: 2018 15th International Symposium on Wireless Communication Systems (ISWCS), 2018.","din1505-2-1":"<span style=\"font-variant:small-caps;\">Fliedner, Niels Hendrik</span> ; <span style=\"font-variant:small-caps;\">Block, Dimitri</span> ; <span style=\"font-variant:small-caps;\">Meier, Uwe</span>: A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance. In: <i>2018 15th International Symposium on Wireless Communication Systems (ISWCS)</i>, 2018","mla":"Fliedner, Niels Hendrik, et al. “A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance.” <i>2018 15th International Symposium on Wireless Communication Systems (ISWCS)</i>, 2018, doi:<a href=\"https://doi.org/10.1109/iswcs.2018.8491207\">10.1109/iswcs.2018.8491207</a>.","ieee":"N. H. Fliedner, D. Block, and U. Meier, “A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance,” in <i>2018 15th International Symposium on Wireless Communication Systems (ISWCS)</i>, Lisbon, Portugal, 2018.","apa":"Fliedner, N. H., Block, D., &#38; Meier, U. (2018). A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance. In <i>2018 15th International Symposium on Wireless Communication Systems (ISWCS)</i>. Lisbon, Portugal. <a href=\"https://doi.org/10.1109/iswcs.2018.8491207\">https://doi.org/10.1109/iswcs.2018.8491207</a>","bjps":"<b>Fliedner NH, Block D and Meier U</b> (2018) A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance. <i>2018 15th International Symposium on Wireless Communication Systems (ISWCS)</i>.","chicago-de":"Fliedner, Niels Hendrik, Dimitri Block und Uwe Meier. 2018. A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance. In: <i>2018 15th International Symposium on Wireless Communication Systems (ISWCS)</i>. doi:<a href=\"https://doi.org/10.1109/iswcs.2018.8491207,\">10.1109/iswcs.2018.8491207,</a> .","ama":"Fliedner NH, Block D, Meier U. A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance. In: <i>2018 15th International Symposium on Wireless Communication Systems (ISWCS)</i>. ; 2018. doi:<a href=\"https://doi.org/10.1109/iswcs.2018.8491207\">10.1109/iswcs.2018.8491207</a>","chicago":"Fliedner, Niels Hendrik, Dimitri Block, and Uwe Meier. “A Software-Defined Channel Sounder for Industrial Environments with Fast Time Variance.” In <i>2018 15th International Symposium on Wireless Communication Systems (ISWCS)</i>, 2018. <a href=\"https://doi.org/10.1109/iswcs.2018.8491207\">https://doi.org/10.1109/iswcs.2018.8491207</a>."},"doi":"10.1109/iswcs.2018.8491207","publication_identifier":{"isbn":["9781538650059"]},"abstract":[{"lang":"eng","text":"Novel industrial wireless applications require wideband, real-time channel characterization due to complex multipath propagation. Rapid machine motion leads to fast time variance of the channel's reflective behavior, which must be captured for radio channel characterization. Additionally, inhomogeneous radio channels demand highly flexible measurements. Existing approaches for radio channel measurements either lack flexibility or wide-band, real-time performance with fast time variance. In this paper, we propose a correlative channel sounding approach utilizing a software-defined architecture. The approach enables wide-band measurements with fast time variance immune to active interference. Furthermore, its real-time capability allows live processing on demand. The desired performance is validated with a demanding industrial application example."}],"_id":"2374","type":"conference","publication":"2018 15th International Symposium on Wireless Communication Systems (ISWCS)","date_updated":"2023-03-15T13:49:39Z"},{"publication_identifier":{"isbn":["9781538671085"]},"abstract":[{"lang":"eng","text":"Wireless industrial environments are dominated by multipath propagation and interference. In order to handle spatial diversity, a possible approach is dividing the physical area into many small cells. The spatial diversity is turned into FDMA by utilizing different frequency bands for neighboring cells. A challenging use case with fast vehicles traveling over long distances in a short time is the packaging industry. It would require many fast handoffs for each vehicle. Thus, a small cell FDMA approach is not appropriate. Conversely, employing radiating lines eliminates FDMA-based handoff issues, and reduces multipath delay spread and signal attenuation compared to centralized approaches. Additionally, radiating lines perform well in high-speed, low-power and long-range environments. In this paper, we realize a novel radiating-line-based, high-reliable, real-time transmission system with near-field coupling. This wireless transmission method results in a frequency-flat, time-invariant radio channel for the given requirements. Employing antenna diversity results in significant improvements in the system's performance compared to single antenna solutions."}],"publisher":"IEEE","type":"conference","_id":"2376","publication":"2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA)","date_updated":"2023-03-15T13:49:39Z","quality_controlled":"1","year":2018,"status":"public","department":[{"_id":"DEP5000"}],"main_file_link":[{"url":"https://ieeexplore.ieee.org/document/8502494"}],"language":[{"iso":"eng"}],"user_id":"57956","conference":{"end_date":"2018-09-07","start_date":"2018-09-04","name":"2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA)","location":" Turin, Italy"},"author":[{"first_name":"Niels Hendrik","full_name":"Fliedner, Niels Hendrik","last_name":"Fliedner"},{"last_name":"Meier","first_name":"Uwe","full_name":"Meier, Uwe"},{"last_name":"Neugebauer","first_name":"Thomas","full_name":"Neugebauer, Thomas"}],"date_created":"2020-05-18T15:24:02Z","title":"Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling","keyword":["Spatial diversity","Antenna measurements","Real-time systems","Frequency measurement","Couplings","Antennas"],"publication_status":"published","citation":{"mla":"Fliedner, Niels Hendrik, et al. “Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling.” <i>2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA)</i>, IEEE, 2018, doi:<a href=\"https://doi.org/10.1109/etfa.2018.8502494\">10.1109/etfa.2018.8502494</a>.","ufg":"<b>Fliedner, Niels Hendrik et. al. (2018)</b>: Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling, in: <i>2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA)</i>.","short":"N.H. Fliedner, U. Meier, T. Neugebauer, in: 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA), IEEE, 2018.","ama":"Fliedner NH, Meier U, Neugebauer T. Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling. In: <i>2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA)</i>. IEEE; 2018. doi:<a href=\"https://doi.org/10.1109/etfa.2018.8502494\">10.1109/etfa.2018.8502494</a>","ieee":"N. H. Fliedner, U. Meier, and T. Neugebauer, “Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling,” in <i>2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA)</i>,  Turin, Italy, 2018.","apa":"Fliedner, N. H., Meier, U., &#38; Neugebauer, T. (2018). Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling. In <i>2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA)</i>.  Turin, Italy: IEEE. <a href=\"https://doi.org/10.1109/etfa.2018.8502494\">https://doi.org/10.1109/etfa.2018.8502494</a>","din1505-2-1":"<span style=\"font-variant:small-caps;\">Fliedner, Niels Hendrik</span> ; <span style=\"font-variant:small-caps;\">Meier, Uwe</span> ; <span style=\"font-variant:small-caps;\">Neugebauer, Thomas</span>: Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling. In: <i>2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA)</i> : IEEE, 2018","havard":"N.H. Fliedner, U. Meier, T. Neugebauer, Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling, in: 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA), IEEE, 2018.","van":"Fliedner NH, Meier U, Neugebauer T. Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling. In: 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA). IEEE; 2018.","chicago-de":"Fliedner, Niels Hendrik, Uwe Meier und Thomas Neugebauer. 2018. Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling. In: <i>2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA)</i>. IEEE. doi:<a href=\"https://doi.org/10.1109/etfa.2018.8502494,\">10.1109/etfa.2018.8502494,</a> .","chicago":"Fliedner, Niels Hendrik, Uwe Meier, and Thomas Neugebauer. “Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling.” In <i>2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA)</i>. IEEE, 2018. <a href=\"https://doi.org/10.1109/etfa.2018.8502494\">https://doi.org/10.1109/etfa.2018.8502494</a>.","bjps":"<b>Fliedner NH, Meier U and Neugebauer T</b> (2018) Performance Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling. <i>2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA)</i>. IEEE."},"doi":"10.1109/etfa.2018.8502494"},{"abstract":[{"text":"This paper introduces an efficient modular solution kit for intralogistic drives, which reduces the total energy consumption of all drives in an automated warehouse by more than 15%. The reduction of energy consumption results from the interaction of optimized components (motors, control techniques and regeneration units), which are described in detail in this paper. Different motor concepts like the induction motor, the synchronous reluctance motor and the permanent magnet synchronous machine are compared according to the special requirements for intralogistics applications. Different control techniques are presented in order to achieve sensorless and efficient-optimal operation of these motors. The sensorless control technique uses signal injection to detect the rotor position sufficiently exact also in case of speed near standstill. Efficient-optimal operation is achieved by reducing the motor current with regard to the torque (MTPA-control). Furthermore this paper introduces a regeneration unit that can be connected between the DC link of frequency inverters and the mains to feed back regenerative energy. The regeneration unit consisting of a buck converter, a synchronous inverter and a line-filter can work in parallel to commonly used uncontrolled rectifiers. Its functioning is shown with the help of measurement results of a 1kW laboratory prototype. The last section shows a demonstrator in which a conventional conveyer system (with induction motor and braking resistor) is compared with an optimized one using the presented components. Power versus time measurements show specific energy savings resulting from the interaction of the optimized components.","lang":"eng"}],"ddc":["620"],"publication_identifier":{"isbn":["978-3-8007-4186-1"]},"date_updated":"2023-03-15T13:49:42Z","publication":"2016 18th European Conference on Power Electronics and Applications (EPE'16 ECCE Europe)","publisher":"VDE Verlag","language":[{"iso":"eng"}],"year":2016,"keyword":["electric current control","induction motors","invertors","permanent magnet motors","reluctance motors","sensorless machine control","torque control","modular solution kit","intralogistic drives","automated warehouse","energy consumption reduction","optimized components interaction","induction motor","synchronous reluctance motor","permanent magnet synchronous machine","sensorless control technique","signal injection","rotor position","motor current","MTPA-control","regeneration unit","DC link","frequency inverters","buck converter","synchronous inverter","line-filter","Induction motors","Reluctance motors","Permanent magnet motors","Rotors","Torque","Inverters","intralogistics","reluctance motor","sensorless control","regeneration unit","braking energy"],"date_created":"2018-11-27T10:16:16Z","author":[{"last_name":"Austermann","first_name":"Johann","full_name":"Austermann, Johann","id":"42114"},{"last_name":"Borcherding","first_name":"Holger","id":"1693","full_name":"Borcherding, Holger"},{"last_name":"Stichweh","full_name":"Stichweh, H.","first_name":"H."},{"last_name":"Grabs","first_name":"Volker","full_name":"Grabs, Volker","id":"58951"}],"related_material":{"link":[{"url":"https://ieeexplore.ieee.org/document/7695687","relation":"contains"}]},"type":"conference","_id":"273","place":"Berlin ; Offenbach","user_id":"45673","department":[{"_id":"DEP5018"}],"page":"1639-1646","status":"public","citation":{"bjps":"<b>Austermann J <i>et al.</i></b> (2016) High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications. <i>2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe)</i>. Berlin ; Offenbach: VDE Verlag, pp. 1639–1646.","chicago-de":"Austermann, Johann, Holger Borcherding, H. Stichweh und Volker Grabs. 2016. High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications. In: <i>2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe)</i>, 1639–1646. Berlin ; Offenbach: VDE Verlag. doi:<a href=\"https://doi.org/10.1109/EPE.2016.7695687,\">10.1109/EPE.2016.7695687,</a> .","chicago":"Austermann, Johann, Holger Borcherding, H. Stichweh, and Volker Grabs. “High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications.” In <i>2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe)</i>, 1639–46. Berlin ; Offenbach: VDE Verlag, 2016. <a href=\"https://doi.org/10.1109/EPE.2016.7695687\">https://doi.org/10.1109/EPE.2016.7695687</a>.","havard":"J. Austermann, H. Borcherding, H. Stichweh, V. Grabs, High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications, in: 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe), VDE Verlag, Berlin ; Offenbach, 2016: pp. 1639–1646.","van":"Austermann J, Borcherding H, Stichweh H, Grabs V. High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications. In: 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe). Berlin ; Offenbach: VDE Verlag; 2016. p. 1639–46.","din1505-2-1":"<span style=\"font-variant:small-caps;\">Austermann, Johann</span> ; <span style=\"font-variant:small-caps;\">Borcherding, Holger</span> ; <span style=\"font-variant:small-caps;\">Stichweh, H.</span> ; <span style=\"font-variant:small-caps;\">Grabs, Volker</span>: High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications. In: <i>2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe)</i>. Berlin ; Offenbach : VDE Verlag, 2016, S. 1639–1646","ieee":"J. Austermann, H. Borcherding, H. Stichweh, and V. Grabs, “High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications,” in <i>2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe)</i>, Karlsruhe, 2016, pp. 1639–1646.","apa":"Austermann, J., Borcherding, H., Stichweh, H., &#38; Grabs, V. (2016). High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications. In <i>2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe)</i> (pp. 1639–1646). Berlin ; Offenbach: VDE Verlag. <a href=\"https://doi.org/10.1109/EPE.2016.7695687\">https://doi.org/10.1109/EPE.2016.7695687</a>","ama":"Austermann J, Borcherding H, Stichweh H, Grabs V. High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications. In: <i>2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe)</i>. Berlin ; Offenbach: VDE Verlag; 2016:1639-1646. doi:<a href=\"https://doi.org/10.1109/EPE.2016.7695687\">10.1109/EPE.2016.7695687</a>","ufg":"<b>Austermann, Johann et. al. (2016)</b>: High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications, in: <i>2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe)</i>, Berlin ; Offenbach, S. 1639–1646.","short":"J. Austermann, H. Borcherding, H. Stichweh, V. Grabs, in: 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe), VDE Verlag, Berlin ; Offenbach, 2016, pp. 1639–1646.","mla":"Austermann, Johann, et al. “High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications.” <i>2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe)</i>, VDE Verlag, 2016, pp. 1639–46, doi:<a href=\"https://doi.org/10.1109/EPE.2016.7695687\">10.1109/EPE.2016.7695687</a>."},"doi":"10.1109/EPE.2016.7695687","title":"High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications","conference":{"location":"Karlsruhe","name":"18th European Conference on Power Electronics and Applications","end_date":"2016-05-09","start_date":"2016-09-05"}},{"_id":"2375","type":"conference","publication":"2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA)","date_updated":"2023-03-15T13:49:39Z","publication_identifier":{"isbn":["9781467379298"]},"abstract":[{"lang":"eng","text":"Industrial wireless communication in license-free spectrum bands such as the 2.4-GHz-ISM band suffer from motion and multipath effects, which cause a high time- and frequency-variant channel attenuation. Additionally, mutual interference from heterogeneous wireless technologies limits real-time capabilities of industrial wireless technologies. Therefore, performance validations of industrial wireless technologies within appropriate industrial wireless environments are necessary. In this paper, we present the first raw measurement data set publication of an industrial wireless environment characterization in a data repository for free public access to enable transparent industrial wireless technology validation and to enhance their comparability. We characterize the whole license-free 2.4-GHz-ISM band with a time resolution of 110 μs and a frequency resolution of 1MHz in a coexistence scenario with four antennas obstructed by robot arm movements. Additionally, the frequency and time variance of the measured channel attenuations are analyzed."}],"conference":{"location":" Luxembourg, Luxembourg","name":"2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA)","start_date":"2015-09-08","end_date":"2015-09-11"},"author":[{"first_name":"Dimitri","full_name":"Block, Dimitri","last_name":"Block"},{"first_name":"Niels Hendrik","full_name":"Fliedner, Niels Hendrik","last_name":"Fliedner"},{"last_name":"Toews","first_name":"Daniel","full_name":"Toews, Daniel"},{"last_name":"Meier","full_name":"Meier, Uwe","first_name":"Uwe"}],"date_created":"2020-05-18T15:20:18Z","publication_status":"published","keyword":["Wireless communication","Wireless sensor networks","Antenna measurements","Attenuation measurement","Extraterrestrial measurements","Time-frequency analysis"],"title":"Wireless channel measurement data sets for reproducible performance evaluation in industrial environments","doi":"10.1109/etfa.2015.7301599","citation":{"din1505-2-1":"<span style=\"font-variant:small-caps;\">Block, Dimitri</span> ; <span style=\"font-variant:small-caps;\">Fliedner, Niels Hendrik</span> ; <span style=\"font-variant:small-caps;\">Toews, Daniel</span> ; <span style=\"font-variant:small-caps;\">Meier, Uwe</span>: Wireless channel measurement data sets for reproducible performance evaluation in industrial environments. In: <i>2015 IEEE 20th Conference on Emerging Technologies &#38; Factory Automation (ETFA)</i>, 2015","van":"Block D, Fliedner NH, Toews D, Meier U. Wireless channel measurement data sets for reproducible performance evaluation in industrial environments. In: 2015 IEEE 20th Conference on Emerging Technologies &#38; Factory Automation (ETFA). 2015.","havard":"D. Block, N.H. Fliedner, D. Toews, U. Meier, Wireless channel measurement data sets for reproducible performance evaluation in industrial environments, in: 2015 IEEE 20th Conference on Emerging Technologies &#38; Factory Automation (ETFA), 2015.","chicago":"Block, Dimitri, Niels Hendrik Fliedner, Daniel Toews, and Uwe Meier. “Wireless Channel Measurement Data Sets for Reproducible Performance Evaluation in Industrial Environments.” In <i>2015 IEEE 20th Conference on Emerging Technologies &#38; Factory Automation (ETFA)</i>, 2015. <a href=\"https://doi.org/10.1109/etfa.2015.7301599\">https://doi.org/10.1109/etfa.2015.7301599</a>.","chicago-de":"Block, Dimitri, Niels Hendrik Fliedner, Daniel Toews und Uwe Meier. 2015. Wireless channel measurement data sets for reproducible performance evaluation in industrial environments. In: <i>2015 IEEE 20th Conference on Emerging Technologies &#38; Factory Automation (ETFA)</i>. doi:<a href=\"https://doi.org/10.1109/etfa.2015.7301599,\">10.1109/etfa.2015.7301599,</a> .","bjps":"<b>Block D <i>et al.</i></b> (2015) Wireless Channel Measurement Data Sets for Reproducible Performance Evaluation in Industrial Environments. <i>2015 IEEE 20th Conference on Emerging Technologies &#38; Factory Automation (ETFA)</i>.","mla":"Block, Dimitri, et al. “Wireless Channel Measurement Data Sets for Reproducible Performance Evaluation in Industrial Environments.” <i>2015 IEEE 20th Conference on Emerging Technologies &#38; Factory Automation (ETFA)</i>, 2015, doi:<a href=\"https://doi.org/10.1109/etfa.2015.7301599\">10.1109/etfa.2015.7301599</a>.","ufg":"<b>Block, Dimitri et. al. (2015)</b>: Wireless channel measurement data sets for reproducible performance evaluation in industrial environments, in: <i>2015 IEEE 20th Conference on Emerging Technologies &#38; Factory Automation (ETFA)</i>.","short":"D. Block, N.H. Fliedner, D. Toews, U. Meier, in: 2015 IEEE 20th Conference on Emerging Technologies &#38; Factory Automation (ETFA), 2015.","ama":"Block D, Fliedner NH, Toews D, Meier U. Wireless channel measurement data sets for reproducible performance evaluation in industrial environments. In: <i>2015 IEEE 20th Conference on Emerging Technologies &#38; Factory Automation (ETFA)</i>. ; 2015. doi:<a href=\"https://doi.org/10.1109/etfa.2015.7301599\">10.1109/etfa.2015.7301599</a>","apa":"Block, D., Fliedner, N. H., Toews, D., &#38; Meier, U. (2015). Wireless channel measurement data sets for reproducible performance evaluation in industrial environments. In <i>2015 IEEE 20th Conference on Emerging Technologies &#38; Factory Automation (ETFA)</i>.  Luxembourg, Luxembourg. <a href=\"https://doi.org/10.1109/etfa.2015.7301599\">https://doi.org/10.1109/etfa.2015.7301599</a>","ieee":"D. Block, N. H. Fliedner, D. Toews, and U. Meier, “Wireless channel measurement data sets for reproducible performance evaluation in industrial environments,” in <i>2015 IEEE 20th Conference on Emerging Technologies &#38; Factory Automation (ETFA)</i>,  Luxembourg, Luxembourg, 2015."},"year":2015,"status":"public","quality_controlled":"1","main_file_link":[{"url":"https://ieeexplore.ieee.org/document/7301599"}],"department":[{"_id":"DEP5000"}],"user_id":"57956","language":[{"iso":"eng"}]},{"publication_identifier":{"issn":["2010-4057"],"eissn":["1307-6892"]},"extern":"1","oa":"1","abstract":[{"text":"This paper provides an introduction into the evolution of information and communication technology and illustrates its usage in the work domain. The paper is sub-divided into two parts. The first part gives an overview over the different phases of information processing in the work domain. It starts by charting the past and present usage of computers in work environments and shows current technological trends, which are likely to influence future business applications. The second part starts by briefly describing, how the usage of computers changed business processes in the past, and presents first Ambient Intelligence applications based on identification and localization information, which are already used in the production and retail sector. Based on current systems and prototype applications, the paper gives an outlook of how Ambient Intelligence technologies could change business processes in the future. ","lang":"eng"}],"publisher":"World Academy of Science, Engineering and Technology, WASET ","publication":"International Journal of Information and Communication Engineering","date_updated":"2023-03-15T13:49:53Z","main_file_link":[{"open_access":"1"}],"year":2010,"language":[{"iso":"eng"}],"date_created":"2021-01-21T09:21:25Z","author":[{"last_name":"Röcker","first_name":"Carsten","id":"61525","full_name":"Röcker, Carsten"}],"volume":4,"publication_status":"published","keyword":["Ubiquitous Computing","Ambient intelligence","business applications","Radio Frequency Identification (RFID)"],"type":"journal_article","_id":"4493","department":[{"_id":"DEP5023"}],"intvolume":"         4","page":"1830 - 1841","status":"public","user_id":"15514","place":"[S.l.]","issue":"7","doi":"10.5281/zenodo.1063024","citation":{"chicago-de":"Röcker, Carsten. 2010. Chances and Challenges of Intelligent Technologies in the Production and Retail Sector. <i>International Journal of Information and Communication Engineering</i> 4, Nr. 7: 1830–1841. doi:<a href=\"https://doi.org/10.5281/zenodo.1063024,\">10.5281/zenodo.1063024,</a> .","chicago":"Röcker, Carsten. “Chances and Challenges of Intelligent Technologies in the Production and Retail Sector.” <i>International Journal of Information and Communication Engineering</i> 4, no. 7 (2010): 1830–41. <a href=\"https://doi.org/10.5281/zenodo.1063024\">https://doi.org/10.5281/zenodo.1063024</a>.","bjps":"<b>Röcker C</b> (2010) Chances and Challenges of Intelligent Technologies in the Production and Retail Sector. <i>International Journal of Information and Communication Engineering</i> <b>4</b>, 1830–1841.","din1505-2-1":"<span style=\"font-variant:small-caps;\">Röcker, Carsten</span>: Chances and Challenges of Intelligent Technologies in the Production and Retail Sector. In: <i>International Journal of Information and Communication Engineering</i> Bd. 4. [S.l.], World Academy of Science, Engineering and Technology, WASET  (2010), Nr. 7, S. 1830–1841","havard":"C. Röcker, Chances and Challenges of Intelligent Technologies in the Production and Retail Sector, International Journal of Information and Communication Engineering. 4 (2010) 1830–1841.","van":"Röcker C. Chances and Challenges of Intelligent Technologies in the Production and Retail Sector. International Journal of Information and Communication Engineering. 2010;4(7):1830–41.","ama":"Röcker C. Chances and Challenges of Intelligent Technologies in the Production and Retail Sector. <i>International Journal of Information and Communication Engineering</i>. 2010;4(7):1830-1841. doi:<a href=\"https://doi.org/10.5281/zenodo.1063024\">10.5281/zenodo.1063024</a>","ieee":"C. Röcker, “Chances and Challenges of Intelligent Technologies in the Production and Retail Sector,” <i>International Journal of Information and Communication Engineering</i>, vol. 4, no. 7, pp. 1830–1841, 2010.","apa":"Röcker, C. (2010). Chances and Challenges of Intelligent Technologies in the Production and Retail Sector. <i>International Journal of Information and Communication Engineering</i>, <i>4</i>(7), 1830–1841. <a href=\"https://doi.org/10.5281/zenodo.1063024\">https://doi.org/10.5281/zenodo.1063024</a>","mla":"Röcker, Carsten. “Chances and Challenges of Intelligent Technologies in the Production and Retail Sector.” <i>International Journal of Information and Communication Engineering</i>, vol. 4, no. 7, World Academy of Science, Engineering and Technology, WASET , 2010, pp. 1830–41, doi:<a href=\"https://doi.org/10.5281/zenodo.1063024\">10.5281/zenodo.1063024</a>.","ufg":"<b>Röcker, Carsten (2010)</b>: Chances and Challenges of Intelligent Technologies in the Production and Retail Sector, in: <i>International Journal of Information and Communication Engineering</i> <i>4</i> (<i>7</i>), S. 1830–1841.","short":"C. Röcker, International Journal of Information and Communication Engineering 4 (2010) 1830–1841."},"title":"Chances and Challenges of Intelligent Technologies in the Production and Retail Sector"},{"abstract":[{"lang":"eng","text":"The need for multiple radio systems in overlapping regions of a factory plant introduces a coexistence problem. The current research challenge is to design and realize radio systems that should be able to achieve a desired quality of service (QoS) in this coexisting environment. Currently transmission resources of hyperspace are not properly exploited. The cognitive radio (CR), which can adapt to the environmental changes by reconfiguring itself, can be used to implement intelligent radio systems to exploit the orthogonal nature of multiple dimensions of hyperspace to maintain the desired QoS in coexisting factory environments. We present initial results of a coexistence optimized CR which can exploit frequency and power, which are two of several dimensions of hyperspace, to improve its QoS in coexisting environments."}],"publication_identifier":{"isbn":["978-1-4244-3938-6"]},"publication":" 2009 6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops","date_updated":"2023-07-28T13:23:19Z","type":"conference_editor_article","_id":"8274","publisher":"IEEE ","place":"Piscataway, NJ","user_id":"83781","language":[{"iso":"eng"}],"department":[{"_id":"DEP5000"},{"_id":"DEP5014"}],"year":"2009","status":"public","citation":{"din1505-2-1":"<span style=\"font-variant:small-caps;\">Ahmad, Kaleem</span> ; <span style=\"font-variant:small-caps;\">Meier, Uwe</span> ; <span style=\"font-variant:small-caps;\">Pape, Andreas</span> ; <span style=\"font-variant:small-caps;\">Kwasnicka, Halina</span> ; <span style=\"font-variant:small-caps;\">Griese, Bjoern</span>: <i>A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems</i>. Piscataway, NJ : IEEE , 2009","havard":"K. Ahmad, U. Meier, A. Pape, H. Kwasnicka, B. Griese, A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems, IEEE , Piscataway, NJ, 2009.","van":"Ahmad K, Meier U, Pape A, Kwasnicka H, Griese B. A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems.  2009 6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops. Piscataway, NJ: IEEE ; 2009.","chicago-de":"Ahmad, Kaleem, Uwe Meier, Andreas Pape, Halina Kwasnicka und Bjoern Griese. 2009. <i>A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems</i>. <i> 2009 6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops</i>. Piscataway, NJ: IEEE . doi:<a href=\"https://doi.org/10.1109/SAHCNW.2009.5172916\">10.1109/SAHCNW.2009.5172916</a>, .","chicago":"Ahmad, Kaleem, Uwe Meier, Andreas Pape, Halina Kwasnicka, and Bjoern Griese. <i>A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems</i>. <i> 2009 6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops</i>. Piscataway, NJ: IEEE , 2009. <a href=\"https://doi.org/10.1109/SAHCNW.2009.5172916\">https://doi.org/10.1109/SAHCNW.2009.5172916</a>.","bjps":"<b>Ahmad K <i>et al.</i></b> (2009) <i>A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems</i>. Piscataway, NJ: IEEE .","mla":"Ahmad, Kaleem, et al. “A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems.” <i> 2009 6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops</i>, IEEE , 2009, <a href=\"https://doi.org/10.1109/SAHCNW.2009.5172916\">https://doi.org/10.1109/SAHCNW.2009.5172916</a>.","ufg":"<b>Ahmad, Kaleem u. a.</b>: A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems, Piscataway, NJ 2009.","short":"K. Ahmad, U. Meier, A. Pape, H. Kwasnicka, B. Griese, A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems, IEEE , Piscataway, NJ, 2009.","ama":"Ahmad K, Meier U, Pape A, Kwasnicka H, Griese B. <i>A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems</i>. IEEE ; 2009. doi:<a href=\"https://doi.org/10.1109/SAHCNW.2009.5172916\">10.1109/SAHCNW.2009.5172916</a>","ieee":"K. Ahmad, U. Meier, A. Pape, H. Kwasnicka, and B. Griese, <i>A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems</i>. Piscataway, NJ: IEEE , 2009. doi: <a href=\"https://doi.org/10.1109/SAHCNW.2009.5172916\">10.1109/SAHCNW.2009.5172916</a>.","apa":"Ahmad, K., Meier, U., Pape, A., Kwasnicka, H., &#38; Griese, B. (2009). A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems. In <i> 2009 6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops</i>. 6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops, Rome, Italy . IEEE . <a href=\"https://doi.org/10.1109/SAHCNW.2009.5172916\">https://doi.org/10.1109/SAHCNW.2009.5172916</a>"},"doi":"10.1109/SAHCNW.2009.5172916","keyword":["Cognitive radio","Quality of service","Space technology","Frequency","Production facilities","Chromium","Manufacturing automation","Intelligent systems","Polarization","Testing"],"title":"A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems","publication_status":"published","date_created":"2022-05-17T14:05:13Z","author":[{"last_name":"Ahmad","full_name":"Ahmad, Kaleem","first_name":"Kaleem"},{"last_name":"Meier","first_name":"Uwe","id":"1143","full_name":"Meier, Uwe"},{"first_name":"Andreas","full_name":"Pape, Andreas","last_name":"Pape"},{"last_name":"Kwasnicka","full_name":"Kwasnicka, Halina","first_name":"Halina"},{"last_name":"Griese","full_name":"Griese, Bjoern","first_name":"Bjoern"}],"conference":{"location":"Rome, Italy ","name":"6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops","start_date":"2009-06-22","end_date":"2009-06-26"}},{"related_material":{"link":[{"relation":"original","url":"https://publications.waset.org/pdf/14497"}]},"type":"conference","_id":"4678","series_title":"International Journal of Information and Communication Engineering","issue":"5","conference":{"start_date":"2009-05-27","end_date":"200905-29","location":"Tokyo, Japan","name":"International Conference on Innovation, Management and Technology (ICIMT'09)"},"citation":{"havard":"C. Röcker, Ambient Intelligence in the Production and Retail Sector: Emerging Opportunities and Potential Pitfalls, in: Proceedings of the International Conference on Innovation, Management and Technology (ICIMT’09), World Academy of Science, Engineering and Technology, 2009: pp. 592–603.","van":"Röcker C. Ambient Intelligence in the Production and Retail Sector: Emerging Opportunities and Potential Pitfalls. In: Proceedings of the International Conference on Innovation, Management and Technology (ICIMT’09). World Academy of Science, Engineering and Technology; 2009. p. 592–603. (International Journal of Information and Communication Engineering; vol. 3).","din1505-2-1":"<span style=\"font-variant:small-caps;\">Röcker, Carsten</span>: Ambient Intelligence in the Production and Retail Sector: Emerging Opportunities and Potential Pitfalls. In: <i>Proceedings of the International Conference on Innovation, Management and Technology (ICIMT’09)</i>, <i>International Journal of Information and Communication Engineering</i>. Bd. 3 : World Academy of Science, Engineering and Technology, 2009, S. 592–603","bjps":"<b>Röcker C</b> (2009) Ambient Intelligence in the Production and Retail Sector: Emerging Opportunities and Potential Pitfalls. <i>Proceedings of the International Conference on Innovation, Management and Technology (ICIMT’09)</i>, vol. 3. World Academy of Science, Engineering and Technology, pp. 592–603.","chicago-de":"Röcker, Carsten. 2009. Ambient Intelligence in the Production and Retail Sector: Emerging Opportunities and Potential Pitfalls. In: <i>Proceedings of the International Conference on Innovation, Management and Technology (ICIMT’09)</i>, 3:592–603. International Journal of Information and Communication Engineering. World Academy of Science, Engineering and Technology. doi:<a href=\"https://doi.org/10.5281/zenodo.1083085,\">10.5281/zenodo.1083085,</a> .","chicago":"Röcker, Carsten. “Ambient Intelligence in the Production and Retail Sector: Emerging Opportunities and Potential Pitfalls.” In <i>Proceedings of the International Conference on Innovation, Management and Technology (ICIMT’09)</i>, 3:592–603. International Journal of Information and Communication Engineering. World Academy of Science, Engineering and Technology, 2009. <a href=\"https://doi.org/10.5281/zenodo.1083085\">https://doi.org/10.5281/zenodo.1083085</a>.","short":"C. Röcker, in: Proceedings of the International Conference on Innovation, Management and Technology (ICIMT’09), World Academy of Science, Engineering and Technology, 2009, pp. 592–603.","ufg":"<b>Röcker, Carsten (2009)</b>: Ambient Intelligence in the Production and Retail Sector: Emerging Opportunities and Potential Pitfalls, in: <i>Proceedings of the International Conference on Innovation, Management and Technology (ICIMT’09)</i> (=<i>International Journal of Information and Communication Engineering 3</i>), S. 592–603.","mla":"Röcker, Carsten. “Ambient Intelligence in the Production and Retail Sector: Emerging Opportunities and Potential Pitfalls.” <i>Proceedings of the International Conference on Innovation, Management and Technology (ICIMT’09)</i>, vol. 3, no. 5, World Academy of Science, Engineering and Technology, 2009, pp. 592–603, doi:<a href=\"https://doi.org/10.5281/zenodo.1083085\">10.5281/zenodo.1083085</a>.","ieee":"C. Röcker, “Ambient Intelligence in the Production and Retail Sector: Emerging Opportunities and Potential Pitfalls,” in <i>Proceedings of the International Conference on Innovation, Management and Technology (ICIMT’09)</i>, Tokyo, Japan, 2009, vol. 3, no. 5, pp. 592–603.","apa":"Röcker, C. (2009). Ambient Intelligence in the Production and Retail Sector: Emerging Opportunities and Potential Pitfalls. In <i>Proceedings of the International Conference on Innovation, Management and Technology (ICIMT’09)</i> (Vol. 3, pp. 592–603). Tokyo, Japan: World Academy of Science, Engineering and Technology. <a href=\"https://doi.org/10.5281/zenodo.1083085\">https://doi.org/10.5281/zenodo.1083085</a>","ama":"Röcker C. Ambient Intelligence in the Production and Retail Sector: Emerging Opportunities and Potential Pitfalls. In: <i>Proceedings of the International Conference on Innovation, Management and Technology (ICIMT’09)</i>. Vol 3. International Journal of Information and Communication Engineering. World Academy of Science, Engineering and Technology; 2009:592-603. doi:<a href=\"https://doi.org/10.5281/zenodo.1083085\">10.5281/zenodo.1083085</a>"},"doi":"10.5281/zenodo.1083085","title":"Ambient Intelligence in the Production and Retail Sector: Emerging Opportunities and Potential Pitfalls","department":[{"_id":"DEP5023"}],"intvolume":"         3","page":"592 - 603","status":"public","user_id":"15514","publisher":"World Academy of Science, Engineering and Technology","date_updated":"2023-03-15T13:49:54Z","publication":"Proceedings of the International Conference on Innovation, Management and Technology (ICIMT'09)","publication_identifier":{"eissn":["1307-6892"]},"oa":"1","extern":"1","abstract":[{"text":"This paper provides an introduction into the evolution of information and communication technology and illustrates its usage in the work domain. The paper is sub-divided into two parts. The first part gives an overview over the different phases of information processing in the work domain. It starts by charting the past and present usage of computers in work environments and shows current technological trends, which are likely to influence future business applications. The second part starts by briefly describing, how the usage of computers changed business processes in the past, and presents first Ambient Intelligence applications based on identification and localization information, which are already used in the production and retail sector. Based on current systems and prototype applications, the paper gives an outlook of how Ambient Intelligence technologies could change business processes in the future.","lang":"eng"}],"date_created":"2021-01-28T11:53:53Z","author":[{"last_name":"Röcker","id":"61525","full_name":"Röcker, Carsten","first_name":"Carsten"}],"volume":3,"publication_status":"published","keyword":["Ambient Intelligence","Ubiquitous Computing","Business Applications","Radio Frequency Identification (RFID)."],"main_file_link":[{"open_access":"1"}],"year":2009,"language":[{"iso":"eng"}]}]