---
_id: '9207'
abstract:
- lang: eng
text: A new acceleration model for the reliability prediction of electrical connectors
has recently been published. This model enables the evaluation of failure rates
gained in highly accelerated life tests (HALT) and considers thermal and vibrational
loading. However, since the initial study only covered a small set of test parameters,
further study of the model is required. Previous studies have sufficiently investigated
the influence of the vibration test mode on the failure rate of electrical connectors.
Therefore, this study now focuses on the influence of the thermal cycling test.
A commonly used automotive connector is chosen and subjected to stresses in HALT
covering various upper temperatures, test durations and thermal cycling frequencies.
Additionally, the principles of determining the coefficient of temperature difference
and the coefficient of the thermal cycling frequency are presented, since these
coefficients are connector specific and required for the acceleration model. Based
on the numbers of failures in test, the influence of the various thermal cycling
tests is discussed, and the coefficients are calculated for the chosen connector.
In conclusion a guideline to select an appropriate upper temperature and test
duration in order to compare the reliability of different electrical connectors
is provided.
article_number: '114633'
author:
- first_name: Kevin
full_name: Krüger, Kevin
id: '76831'
last_name: Krüger
- first_name: Jian
full_name: Song, Jian
id: '5297'
last_name: Song
citation:
ama: 'Krüger K, Song J. The influence of thermal cycling test parameters on the
failure rate of electrical connectors. Microelectronics reliability : an internat
journal & world abstracting service. 2022;138(November 2022). doi:https://doi.org/10.1016/j.microrel.2022.114633'
apa: 'Krüger, K., & Song, J. (2022). The influence of thermal cycling test parameters
on the failure rate of electrical connectors. Microelectronics Reliability :
An Internat. Journal & World Abstracting Service, 138(November
2022), Article 114633. https://doi.org/10.1016/j.microrel.2022.114633'
bjps: 'Krüger K and Song J (2022) The Influence of Thermal Cycling Test Parameters
on the Failure Rate of Electrical Connectors. Microelectronics reliability :
an internat. journal & world abstracting service 138.'
chicago: 'Krüger, Kevin, and Jian Song. “The Influence of Thermal Cycling Test Parameters
on the Failure Rate of Electrical Connectors.” Microelectronics Reliability :
An Internat. Journal & World Abstracting Service 138, no. November 2022
(2022). https://doi.org/10.1016/j.microrel.2022.114633.'
chicago-de: 'Krüger, Kevin und Jian Song. 2022. The influence of thermal cycling
test parameters on the failure rate of electrical connectors. Microelectronics
reliability : an internat. journal & world abstracting service 138, Nr.
November 2022. doi:https://doi.org/10.1016/j.microrel.2022.114633,
.'
din1505-2-1: 'Krüger, Kevin ; Song, Jian: The influence of thermal cycling
test parameters on the failure rate of electrical connectors. In: Microelectronics
reliability : an internat. journal & world abstracting service Bd. 138.
Amsterdam, Elsevier (2022), Nr. November 2022'
havard: 'K. Krüger, J. Song, The influence of thermal cycling test parameters on
the failure rate of electrical connectors, Microelectronics Reliability : An Internat.
Journal & World Abstracting Service. 138 (2022).'
ieee: 'K. Krüger and J. Song, “The influence of thermal cycling test parameters
on the failure rate of electrical connectors,” Microelectronics reliability :
an internat. journal & world abstracting service, vol. 138, no. November
2022, Art. no. 114633, 2022, doi: https://doi.org/10.1016/j.microrel.2022.114633.'
mla: 'Krüger, Kevin, and Jian Song. “The Influence of Thermal Cycling Test Parameters
on the Failure Rate of Electrical Connectors.” Microelectronics Reliability :
An Internat. Journal & World Abstracting Service, vol. 138, no. November
2022, 114633, 2022, https://doi.org/10.1016/j.microrel.2022.114633.'
short: 'K. Krüger, J. Song, Microelectronics Reliability : An Internat. Journal
& World Abstracting Service 138 (2022).'
ufg: 'Krüger, Kevin/Song, Jian: The influence of thermal cycling test parameters
on the failure rate of electrical connectors, in: Microelectronics reliability :
an internat. journal & world abstracting service 138 (2022), H. November
2022.'
van: 'Krüger K, Song J. The influence of thermal cycling test parameters on the
failure rate of electrical connectors. Microelectronics reliability : an internat
journal & world abstracting service. 2022;138(November 2022).'
date_created: 2022-12-11T13:17:29Z
date_updated: 2024-08-05T07:33:56Z
department:
- _id: DEP6012
doi: https://doi.org/10.1016/j.microrel.2022.114633
intvolume: ' 138'
issue: November 2022
keyword:
- Electrical connectors
- Life test
- Thermal cycling
- Upper temperature Duration
- Temperature difference
- Cycling frequency
language:
- iso: eng
place: Amsterdam
publication: 'Microelectronics reliability : an internat. journal & world abstracting
service'
publication_identifier:
issn:
- 0026-2714
publication_status: published
publisher: Elsevier
status: public
title: The influence of thermal cycling test parameters on the failure rate of electrical
connectors
type: scientific_journal_article
user_id: '83781'
volume: 138
year: '2022'
...
---
_id: '12231'
abstract:
- lang: eng
text: In temperate lakes, it is generally assumed that light rather than temperature
constrains phytoplankton growth in winter. Rapid winter warming and increasing
observations of winter blooms warrant more investigation of these controls. We
investigated the mechanisms regulating a massive winter diatom bloom in a temperate
lake. High frequency data and process-based lake modeling demonstrated that phytoplankton
growth in winter was dually controlled by light and temperature, rather than by
light alone. Water temperature played a further indirect role in initiating the
bloom through ice-thaw, which increased light exposure. The bloom was ultimately
terminated by silicon limitation and sedimentation. These mechanisms differ from
those typically responsible for spring diatom blooms and contributed to the high
peak biomass. Our findings show that phytoplankton growth in winter is more sensitive
to temperature, and consequently to climate change, than previously assumed. This
has implications for nutrient cycling and seasonal succession of lake phytoplankton
communities. The present study exemplifies the strength in integrating data analysis
with different temporal resolutions and lake modeling. The new lake ecological
model serves as an effective tool in analyzing and predicting winter phytoplankton
dynamics for temperate lakes.
article_number: '116681'
author:
- first_name: Xiangzhen
full_name: Kong, Xiangzhen
last_name: Kong
- first_name: Michael
full_name: Seewald, Michael
last_name: Seewald
- first_name: Tallent
full_name: Dadi, Tallent
last_name: Dadi
- first_name: Kurt
full_name: Friese, Kurt
last_name: Friese
- first_name: Chenxi
full_name: Mi, Chenxi
last_name: Mi
- first_name: Bertram
full_name: Boehrer, Bertram
last_name: Boehrer
- first_name: Martin
full_name: Schultze, Martin
last_name: Schultze
- first_name: Karsten
full_name: Rinke, Karsten
last_name: Rinke
- first_name: Tom
full_name: Shatwell, Tom
id: '86424'
last_name: Shatwell
orcid: 0000-0002-4520-7916
citation:
ama: 'Kong X, Seewald M, Dadi T, et al. Unravelling winter diatom blooms in temperate
lakes using high frequency data and ecological modeling. Water research : a
journal of the International Water Association. 2020;190. doi:10.1016/j.watres.2020.116681'
apa: 'Kong, X., Seewald, M., Dadi, T., Friese, K., Mi, C., Boehrer, B., Schultze,
M., Rinke, K., & Shatwell, T. (2020). Unravelling winter diatom blooms in
temperate lakes using high frequency data and ecological modeling. Water Research :
A Journal of the International Water Association, 190, Article 116681.
https://doi.org/10.1016/j.watres.2020.116681'
bjps: 'Kong X et al. (2020) Unravelling Winter Diatom Blooms in Temperate
Lakes Using High Frequency Data and Ecological Modeling. Water research : a
journal of the International Water Association 190.'
chicago: 'Kong, Xiangzhen, Michael Seewald, Tallent Dadi, Kurt Friese, Chenxi Mi,
Bertram Boehrer, Martin Schultze, Karsten Rinke, and Tom Shatwell. “Unravelling
Winter Diatom Blooms in Temperate Lakes Using High Frequency Data and Ecological
Modeling.” Water Research : A Journal of the International Water Association
190 (2020). https://doi.org/10.1016/j.watres.2020.116681.'
chicago-de: 'Kong, Xiangzhen, Michael Seewald, Tallent Dadi, Kurt Friese, Chenxi
Mi, Bertram Boehrer, Martin Schultze, Karsten Rinke und Tom Shatwell. 2020. Unravelling
winter diatom blooms in temperate lakes using high frequency data and ecological
modeling. Water research : a journal of the International Water Association
190. doi:10.1016/j.watres.2020.116681,
.'
din1505-2-1: 'Kong,
Xiangzhen ; Seewald, Michael
; Dadi, Tallent ; Friese,
Kurt ; Mi, Chenxi ; Boehrer, Bertram ; Schultze,
Martin ; Rinke, Karsten ;
u. a.: Unravelling winter diatom blooms in temperate lakes using high frequency
data and ecological modeling. In: Water research : a journal of the International
Water Association Bd. 190. Amsterdam, Elsevier BV (2020)'
havard: 'X. Kong, M. Seewald, T. Dadi, K. Friese, C. Mi, B. Boehrer, M. Schultze,
K. Rinke, T. Shatwell, Unravelling winter diatom blooms in temperate lakes using
high frequency data and ecological modeling, Water Research : A Journal of the
International Water Association. 190 (2020).'
ieee: 'X. Kong et al., “Unravelling winter diatom blooms in temperate lakes
using high frequency data and ecological modeling,” Water research : a journal
of the International Water Association, vol. 190, Art. no. 116681, 2020, doi:
10.1016/j.watres.2020.116681.'
mla: 'Kong, Xiangzhen, et al. “Unravelling Winter Diatom Blooms in Temperate Lakes
Using High Frequency Data and Ecological Modeling.” Water Research : A Journal
of the International Water Association, vol. 190, 116681, 2020, https://doi.org/10.1016/j.watres.2020.116681.'
short: 'X. Kong, M. Seewald, T. Dadi, K. Friese, C. Mi, B. Boehrer, M. Schultze,
K. Rinke, T. Shatwell, Water Research : A Journal of the International Water Association
190 (2020).'
ufg: 'Kong, Xiangzhen u. a.: Unravelling winter diatom blooms in temperate
lakes using high frequency data and ecological modeling, in: Water research :
a journal of the International Water Association 190 (2020).'
van: 'Kong X, Seewald M, Dadi T, Friese K, Mi C, Boehrer B, et al. Unravelling winter
diatom blooms in temperate lakes using high frequency data and ecological modeling.
Water research : a journal of the International Water Association. 2020;190.'
date_created: 2024-12-08T20:19:54Z
date_updated: 2024-12-09T11:24:12Z
department:
- _id: DEP8022
doi: 10.1016/j.watres.2020.116681
extern: '1'
intvolume: ' 190'
keyword:
- Winter diatom bloom
- High frequency monitoring
- Lake modeling
- Light limitation
- Temperature
language:
- iso: eng
main_file_link:
- url: https://doi.org/10.1016/j.watres.2020.116681
place: Amsterdam
publication: 'Water research : a journal of the International Water Association'
publication_identifier:
eissn:
- 1879-2448
issn:
- 0043-1354
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Unravelling winter diatom blooms in temperate lakes using high frequency data
and ecological modeling
type: scientific_journal_article
user_id: '83781'
volume: 190
year: '2020'
...
---
_id: '2372'
abstract:
- lang: eng
text: "Novel industrial wireless applications require wideband, real-time channel\r\ncharacterization
due to complex multipath propagation. Rapid machine motion\r\nleads to fast time
variance of the channel's reflective behavior, which must be\r\ncaptured for radio
channel characterization. Additionally, inhomogeneous radio\r\nchannels demand
highly flexible measurements. Existing approaches for radio\r\nchannel measurements
either lack flexibility or wide-band, real-time\r\nperformance with fast time
variance. In this paper, we propose a correlative\r\nchannel sounding approach
utilizing a software-defined architecture. The\r\napproach enables real-time,
wide-band measurements with fast time variance\r\nimmune to active interference.
The desired performance is validated with a\r\ndemanding industrial application
example."
author:
- first_name: Niels Hendrik
full_name: Fliedner, Niels Hendrik
last_name: Fliedner
- first_name: Dimitri
full_name: Block, Dimitri
last_name: Block
- first_name: Uwe
full_name: Meier, Uwe
last_name: Meier
citation:
ama: Fliedner NH, Block D, Meier U. A Software-Defined Channel Sounder for Industrial
Environments with Fast Time Variance. arXiv:180501236. 2018.
apa: Fliedner, N. H., Block, D., & Meier, U. (2018). A Software-Defined Channel
Sounder for Industrial Environments with Fast Time Variance. ArXiv:1805.01236.
bjps: Fliedner NH, Block D and Meier U (2018) A Software-Defined Channel
Sounder for Industrial Environments with Fast Time Variance. arXiv:1805.01236.
chicago: Fliedner, Niels Hendrik, Dimitri Block, and Uwe Meier. “A Software-Defined
Channel Sounder for Industrial Environments with Fast Time Variance.” ArXiv:1805.01236,
2018.
chicago-de: Fliedner, Niels Hendrik, Dimitri Block und Uwe Meier. 2018. A Software-Defined
Channel Sounder for Industrial Environments with Fast Time Variance. arXiv:1805.01236.
din1505-2-1: 'Fliedner, Niels Hendrik
; Block, Dimitri ; Meier,
Uwe: A Software-Defined Channel Sounder for Industrial Environments with
Fast Time Variance. In: arXiv:1805.01236 (2018)'
havard: N.H. Fliedner, D. Block, U. Meier, A Software-Defined Channel Sounder for
Industrial Environments with Fast Time Variance, ArXiv:1805.01236. (2018).
ieee: N. H. Fliedner, D. Block, and U. Meier, “A Software-Defined Channel Sounder
for Industrial Environments with Fast Time Variance,” arXiv:1805.01236.
2018.
mla: Fliedner, Niels Hendrik, et al. “A Software-Defined Channel Sounder for Industrial
Environments with Fast Time Variance.” ArXiv:1805.01236, 2018.
short: N.H. Fliedner, D. Block, U. Meier, ArXiv:1805.01236 (2018).
ufg: 'Fliedner, Niels Hendrik et. al. (2018): A Software-Defined Channel
Sounder for Industrial Environments with Fast Time Variance.'
van: Fliedner NH, Block D, Meier U. A Software-Defined Channel Sounder for Industrial
Environments with Fast Time Variance. arXiv:1805.01236. 2018.
date_created: 2020-05-18T15:07:56Z
date_updated: 2023-03-15T13:49:39Z
ddc:
- '620'
file:
- access_level: open_access
content_type: application/pdf
creator: zph-yh1
date_created: 2020-05-18T15:08:45Z
date_updated: 2020-05-18T15:08:45Z
file_id: '2373'
file_name: 1805.01236v1.pdf
file_size: 574858
relation: main_file
success: 1
file_date_updated: 2020-05-18T15:08:45Z
has_accepted_license: '1'
keyword:
- Correlation
- Wireless communication
- Real-time systems
- Logic gates
- Frequency measurement
- Libraries
- Time measurement
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://arxiv.org/abs/1805.01236
oa: '1'
page: '6'
publication: arXiv:1805.01236
publication_status: published
status: public
title: A Software-Defined Channel Sounder for Industrial Environments with Fast Time
Variance
type: preprint
user_id: '57956'
year: 2018
...
---
_id: '2374'
abstract:
- lang: eng
text: Novel industrial wireless applications require wideband, real-time channel
characterization due to complex multipath propagation. Rapid machine motion leads
to fast time variance of the channel's reflective behavior, which must be captured
for radio channel characterization. Additionally, inhomogeneous radio channels
demand highly flexible measurements. Existing approaches for radio channel measurements
either lack flexibility or wide-band, real-time performance with fast time variance.
In this paper, we propose a correlative channel sounding approach utilizing a
software-defined architecture. The approach enables wide-band measurements with
fast time variance immune to active interference. Furthermore, its real-time capability
allows live processing on demand. The desired performance is validated with a
demanding industrial application example.
author:
- first_name: Niels Hendrik
full_name: Fliedner, Niels Hendrik
last_name: Fliedner
- first_name: Dimitri
full_name: Block, Dimitri
last_name: Block
- first_name: Uwe
full_name: Meier, Uwe
last_name: Meier
citation:
ama: 'Fliedner NH, Block D, Meier U. A Software-Defined Channel Sounder for Industrial
Environments with Fast Time Variance. In: 2018 15th International Symposium
on Wireless Communication Systems (ISWCS). ; 2018. doi:10.1109/iswcs.2018.8491207'
apa: Fliedner, N. H., Block, D., & Meier, U. (2018). A Software-Defined Channel
Sounder for Industrial Environments with Fast Time Variance. In 2018 15th International
Symposium on Wireless Communication Systems (ISWCS). Lisbon, Portugal. https://doi.org/10.1109/iswcs.2018.8491207
bjps: Fliedner NH, Block D and Meier U (2018) A Software-Defined Channel
Sounder for Industrial Environments with Fast Time Variance. 2018 15th International
Symposium on Wireless Communication Systems (ISWCS).
chicago: Fliedner, Niels Hendrik, Dimitri Block, and Uwe Meier. “A Software-Defined
Channel Sounder for Industrial Environments with Fast Time Variance.” In 2018
15th International Symposium on Wireless Communication Systems (ISWCS), 2018.
https://doi.org/10.1109/iswcs.2018.8491207.
chicago-de: 'Fliedner, Niels Hendrik, Dimitri Block und Uwe Meier. 2018. A Software-Defined
Channel Sounder for Industrial Environments with Fast Time Variance. In: 2018
15th International Symposium on Wireless Communication Systems (ISWCS). doi:10.1109/iswcs.2018.8491207,
.'
din1505-2-1: 'Fliedner, Niels Hendrik
; Block, Dimitri ; Meier,
Uwe: A Software-Defined Channel Sounder for Industrial Environments with
Fast Time Variance. In: 2018 15th International Symposium on Wireless Communication
Systems (ISWCS), 2018'
havard: 'N.H. Fliedner, D. Block, U. Meier, A Software-Defined Channel Sounder for
Industrial Environments with Fast Time Variance, in: 2018 15th International Symposium
on Wireless Communication Systems (ISWCS), 2018.'
ieee: N. H. Fliedner, D. Block, and U. Meier, “A Software-Defined Channel Sounder
for Industrial Environments with Fast Time Variance,” in 2018 15th International
Symposium on Wireless Communication Systems (ISWCS), Lisbon, Portugal, 2018.
mla: Fliedner, Niels Hendrik, et al. “A Software-Defined Channel Sounder for Industrial
Environments with Fast Time Variance.” 2018 15th International Symposium on
Wireless Communication Systems (ISWCS), 2018, doi:10.1109/iswcs.2018.8491207.
short: 'N.H. Fliedner, D. Block, U. Meier, in: 2018 15th International Symposium
on Wireless Communication Systems (ISWCS), 2018.'
ufg: 'Fliedner, Niels Hendrik et. al. (2018): A Software-Defined Channel
Sounder for Industrial Environments with Fast Time Variance, in: 2018 15th
International Symposium on Wireless Communication Systems (ISWCS).'
van: 'Fliedner NH, Block D, Meier U. A Software-Defined Channel Sounder for Industrial
Environments with Fast Time Variance. In: 2018 15th International Symposium on
Wireless Communication Systems (ISWCS). 2018.'
conference:
end_date: 2018-08-31
location: Lisbon, Portugal
name: 2018 15th International Symposium on Wireless Communication Systems (ISWCS)
start_date: 2018-08-28
date_created: 2020-05-18T15:14:53Z
date_updated: 2023-03-15T13:49:39Z
department:
- _id: DEP5000
doi: 10.1109/iswcs.2018.8491207
keyword:
- Correlation
- Wireless communication
- Real-time systems
- Logic gates
- Frequency measurement
- Libraries
- Time measurement
language:
- iso: eng
main_file_link:
- url: https://ieeexplore.ieee.org/document/8491207
publication: 2018 15th International Symposium on Wireless Communication Systems (ISWCS)
publication_identifier:
isbn:
- '9781538650059'
publication_status: published
quality_controlled: '1'
status: public
title: A Software-Defined Channel Sounder for Industrial Environments with Fast Time
Variance
type: conference
user_id: '57956'
year: 2018
...
---
_id: '2376'
abstract:
- lang: eng
text: Wireless industrial environments are dominated by multipath propagation and
interference. In order to handle spatial diversity, a possible approach is dividing
the physical area into many small cells. The spatial diversity is turned into
FDMA by utilizing different frequency bands for neighboring cells. A challenging
use case with fast vehicles traveling over long distances in a short time is the
packaging industry. It would require many fast handoffs for each vehicle. Thus,
a small cell FDMA approach is not appropriate. Conversely, employing radiating
lines eliminates FDMA-based handoff issues, and reduces multipath delay spread
and signal attenuation compared to centralized approaches. Additionally, radiating
lines perform well in high-speed, low-power and long-range environments. In this
paper, we realize a novel radiating-line-based, high-reliable, real-time transmission
system with near-field coupling. This wireless transmission method results in
a frequency-flat, time-invariant radio channel for the given requirements. Employing
antenna diversity results in significant improvements in the system's performance
compared to single antenna solutions.
author:
- first_name: Niels Hendrik
full_name: Fliedner, Niels Hendrik
last_name: Fliedner
- first_name: Uwe
full_name: Meier, Uwe
last_name: Meier
- first_name: Thomas
full_name: Neugebauer, Thomas
last_name: Neugebauer
citation:
ama: 'Fliedner NH, Meier U, Neugebauer T. Performance Analysis of a High-Reliable
Real-Time Wireless Transmission System with Near Field Coupling. In: 2018 IEEE
23rd International Conference on Emerging Technologies and Factory Automation
(ETFA). IEEE; 2018. doi:10.1109/etfa.2018.8502494'
apa: 'Fliedner, N. H., Meier, U., & Neugebauer, T. (2018). Performance Analysis
of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling.
In 2018 IEEE 23rd International Conference on Emerging Technologies and Factory
Automation (ETFA). Turin, Italy: IEEE. https://doi.org/10.1109/etfa.2018.8502494'
bjps: Fliedner NH, Meier U and Neugebauer T (2018) Performance Analysis of
a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling.
2018 IEEE 23rd International Conference on Emerging Technologies and Factory
Automation (ETFA). IEEE.
chicago: Fliedner, Niels Hendrik, Uwe Meier, and Thomas Neugebauer. “Performance
Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field
Coupling.” In 2018 IEEE 23rd International Conference on Emerging Technologies
and Factory Automation (ETFA). IEEE, 2018. https://doi.org/10.1109/etfa.2018.8502494.
chicago-de: 'Fliedner, Niels Hendrik, Uwe Meier und Thomas Neugebauer. 2018. Performance
Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field
Coupling. In: 2018 IEEE 23rd International Conference on Emerging Technologies
and Factory Automation (ETFA). IEEE. doi:10.1109/etfa.2018.8502494,
.'
din1505-2-1: 'Fliedner, Niels Hendrik
; Meier, Uwe ; Neugebauer,
Thomas: Performance Analysis of a High-Reliable Real-Time Wireless Transmission
System with Near Field Coupling. In: 2018 IEEE 23rd International Conference
on Emerging Technologies and Factory Automation (ETFA) : IEEE, 2018'
havard: 'N.H. Fliedner, U. Meier, T. Neugebauer, Performance Analysis of a High-Reliable
Real-Time Wireless Transmission System with Near Field Coupling, in: 2018 IEEE
23rd International Conference on Emerging Technologies and Factory Automation
(ETFA), IEEE, 2018.'
ieee: N. H. Fliedner, U. Meier, and T. Neugebauer, “Performance Analysis of a High-Reliable
Real-Time Wireless Transmission System with Near Field Coupling,” in 2018 IEEE
23rd International Conference on Emerging Technologies and Factory Automation
(ETFA), Turin, Italy, 2018.
mla: Fliedner, Niels Hendrik, et al. “Performance Analysis of a High-Reliable Real-Time
Wireless Transmission System with Near Field Coupling.” 2018 IEEE 23rd International
Conference on Emerging Technologies and Factory Automation (ETFA), IEEE, 2018,
doi:10.1109/etfa.2018.8502494.
short: 'N.H. Fliedner, U. Meier, T. Neugebauer, in: 2018 IEEE 23rd International
Conference on Emerging Technologies and Factory Automation (ETFA), IEEE, 2018.'
ufg: 'Fliedner, Niels Hendrik et. al. (2018): Performance Analysis of a High-Reliable
Real-Time Wireless Transmission System with Near Field Coupling, in: 2018 IEEE
23rd International Conference on Emerging Technologies and Factory Automation
(ETFA).'
van: 'Fliedner NH, Meier U, Neugebauer T. Performance Analysis of a High-Reliable
Real-Time Wireless Transmission System with Near Field Coupling. In: 2018 IEEE
23rd International Conference on Emerging Technologies and Factory Automation
(ETFA). IEEE; 2018.'
conference:
end_date: 2018-09-07
location: ' Turin, Italy'
name: 2018 IEEE 23rd International Conference on Emerging Technologies and Factory
Automation (ETFA)
start_date: 2018-09-04
date_created: 2020-05-18T15:24:02Z
date_updated: 2023-03-15T13:49:39Z
department:
- _id: DEP5000
doi: 10.1109/etfa.2018.8502494
keyword:
- Spatial diversity
- Antenna measurements
- Real-time systems
- Frequency measurement
- Couplings
- Antennas
language:
- iso: eng
main_file_link:
- url: https://ieeexplore.ieee.org/document/8502494
publication: 2018 IEEE 23rd International Conference on Emerging Technologies and
Factory Automation (ETFA)
publication_identifier:
isbn:
- '9781538671085'
publication_status: published
publisher: IEEE
quality_controlled: '1'
status: public
title: Performance Analysis of a High-Reliable Real-Time Wireless Transmission System
with Near Field Coupling
type: conference
user_id: '57956'
year: 2018
...
---
_id: '273'
abstract:
- lang: eng
text: This paper introduces an efficient modular solution kit for intralogistic
drives, which reduces the total energy consumption of all drives in an automated
warehouse by more than 15%. The reduction of energy consumption results from the
interaction of optimized components (motors, control techniques and regeneration
units), which are described in detail in this paper. Different motor concepts
like the induction motor, the synchronous reluctance motor and the permanent magnet
synchronous machine are compared according to the special requirements for intralogistics
applications. Different control techniques are presented in order to achieve sensorless
and efficient-optimal operation of these motors. The sensorless control technique
uses signal injection to detect the rotor position sufficiently exact also in
case of speed near standstill. Efficient-optimal operation is achieved by reducing
the motor current with regard to the torque (MTPA-control). Furthermore this paper
introduces a regeneration unit that can be connected between the DC link of frequency
inverters and the mains to feed back regenerative energy. The regeneration unit
consisting of a buck converter, a synchronous inverter and a line-filter can work
in parallel to commonly used uncontrolled rectifiers. Its functioning is shown
with the help of measurement results of a 1kW laboratory prototype. The last section
shows a demonstrator in which a conventional conveyer system (with induction motor
and braking resistor) is compared with an optimized one using the presented components.
Power versus time measurements show specific energy savings resulting from the
interaction of the optimized components.
author:
- first_name: Johann
full_name: Austermann, Johann
id: '42114'
last_name: Austermann
- first_name: Holger
full_name: Borcherding, Holger
id: '1693'
last_name: Borcherding
- first_name: H.
full_name: Stichweh, H.
last_name: Stichweh
- first_name: Volker
full_name: Grabs, Volker
id: '58951'
last_name: Grabs
citation:
ama: 'Austermann J, Borcherding H, Stichweh H, Grabs V. High Efficient Modular Drive
System - An Ideal Approach for Green Intralogistics Applications. In: 2016
18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe).
Berlin ; Offenbach: VDE Verlag; 2016:1639-1646. doi:10.1109/EPE.2016.7695687'
apa: 'Austermann, J., Borcherding, H., Stichweh, H., & Grabs, V. (2016). High
Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications.
In 2016 18th European Conference on Power Electronics and Applications (EPE’16
ECCE Europe) (pp. 1639–1646). Berlin ; Offenbach: VDE Verlag. https://doi.org/10.1109/EPE.2016.7695687'
bjps: 'Austermann J et al. (2016) High Efficient Modular Drive System
- An Ideal Approach for Green Intralogistics Applications. 2016 18th European
Conference on Power Electronics and Applications (EPE’16 ECCE Europe). Berlin ;
Offenbach: VDE Verlag, pp. 1639–1646.'
chicago: 'Austermann, Johann, Holger Borcherding, H. Stichweh, and Volker Grabs.
“High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics
Applications.” In 2016 18th European Conference on Power Electronics and Applications
(EPE’16 ECCE Europe), 1639–46. Berlin ; Offenbach: VDE Verlag, 2016. https://doi.org/10.1109/EPE.2016.7695687.'
chicago-de: 'Austermann, Johann, Holger Borcherding, H. Stichweh und Volker Grabs.
2016. High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics
Applications. In: 2016 18th European Conference on Power Electronics and Applications
(EPE’16 ECCE Europe), 1639–1646. Berlin ; Offenbach: VDE Verlag. doi:10.1109/EPE.2016.7695687,
.'
din1505-2-1: 'Austermann, Johann ;
Borcherding, Holger ; Stichweh,
H. ; Grabs, Volker: High
Efficient Modular Drive System - An Ideal Approach for Green Intralogistics Applications.
In: 2016 18th European Conference on Power Electronics and Applications (EPE’16
ECCE Europe). Berlin ; Offenbach : VDE Verlag, 2016, S. 1639–1646'
havard: 'J. Austermann, H. Borcherding, H. Stichweh, V. Grabs, High Efficient Modular
Drive System - An Ideal Approach for Green Intralogistics Applications, in: 2016
18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe),
VDE Verlag, Berlin ; Offenbach, 2016: pp. 1639–1646.'
ieee: J. Austermann, H. Borcherding, H. Stichweh, and V. Grabs, “High Efficient
Modular Drive System - An Ideal Approach for Green Intralogistics Applications,”
in 2016 18th European Conference on Power Electronics and Applications (EPE’16
ECCE Europe), Karlsruhe, 2016, pp. 1639–1646.
mla: Austermann, Johann, et al. “High Efficient Modular Drive System - An Ideal
Approach for Green Intralogistics Applications.” 2016 18th European Conference
on Power Electronics and Applications (EPE’16 ECCE Europe), VDE Verlag, 2016,
pp. 1639–46, doi:10.1109/EPE.2016.7695687.
short: 'J. Austermann, H. Borcherding, H. Stichweh, V. Grabs, in: 2016 18th European
Conference on Power Electronics and Applications (EPE’16 ECCE Europe), VDE Verlag,
Berlin ; Offenbach, 2016, pp. 1639–1646.'
ufg: 'Austermann, Johann et. al. (2016): High Efficient Modular Drive System
- An Ideal Approach for Green Intralogistics Applications, in: 2016 18th European
Conference on Power Electronics and Applications (EPE’16 ECCE Europe), Berlin ;
Offenbach, S. 1639–1646.'
van: 'Austermann J, Borcherding H, Stichweh H, Grabs V. High Efficient Modular Drive
System - An Ideal Approach for Green Intralogistics Applications. In: 2016 18th
European Conference on Power Electronics and Applications (EPE’16 ECCE Europe).
Berlin ; Offenbach: VDE Verlag; 2016. p. 1639–46.'
conference:
end_date: 2016-05-09
location: Karlsruhe
name: 18th European Conference on Power Electronics and Applications
start_date: 2016-09-05
date_created: 2018-11-27T10:16:16Z
date_updated: 2023-03-15T13:49:42Z
ddc:
- '620'
department:
- _id: DEP5018
doi: 10.1109/EPE.2016.7695687
keyword:
- electric current control
- induction motors
- invertors
- permanent magnet motors
- reluctance motors
- sensorless machine control
- torque control
- modular solution kit
- intralogistic drives
- automated warehouse
- energy consumption reduction
- optimized components interaction
- induction motor
- synchronous reluctance motor
- permanent magnet synchronous machine
- sensorless control technique
- signal injection
- rotor position
- motor current
- MTPA-control
- regeneration unit
- DC link
- frequency inverters
- buck converter
- synchronous inverter
- line-filter
- Induction motors
- Reluctance motors
- Permanent magnet motors
- Rotors
- Torque
- Inverters
- intralogistics
- reluctance motor
- sensorless control
- regeneration unit
- braking energy
language:
- iso: eng
page: 1639-1646
place: Berlin ; Offenbach
publication: 2016 18th European Conference on Power Electronics and Applications (EPE'16
ECCE Europe)
publication_identifier:
isbn:
- 978-3-8007-4186-1
publisher: VDE Verlag
related_material:
link:
- relation: contains
url: https://ieeexplore.ieee.org/document/7695687
status: public
title: High Efficient Modular Drive System - An Ideal Approach for Green Intralogistics
Applications
type: conference
user_id: '45673'
year: 2016
...
---
_id: '2375'
abstract:
- lang: eng
text: Industrial wireless communication in license-free spectrum bands such as the
2.4-GHz-ISM band suffer from motion and multipath effects, which cause a high
time- and frequency-variant channel attenuation. Additionally, mutual interference
from heterogeneous wireless technologies limits real-time capabilities of industrial
wireless technologies. Therefore, performance validations of industrial wireless
technologies within appropriate industrial wireless environments are necessary.
In this paper, we present the first raw measurement data set publication of an
industrial wireless environment characterization in a data repository for free
public access to enable transparent industrial wireless technology validation
and to enhance their comparability. We characterize the whole license-free 2.4-GHz-ISM
band with a time resolution of 110 μs and a frequency resolution of 1MHz in a
coexistence scenario with four antennas obstructed by robot arm movements. Additionally,
the frequency and time variance of the measured channel attenuations are analyzed.
author:
- first_name: Dimitri
full_name: Block, Dimitri
last_name: Block
- first_name: Niels Hendrik
full_name: Fliedner, Niels Hendrik
last_name: Fliedner
- first_name: Daniel
full_name: Toews, Daniel
last_name: Toews
- first_name: Uwe
full_name: Meier, Uwe
last_name: Meier
citation:
ama: 'Block D, Fliedner NH, Toews D, Meier U. Wireless channel measurement data
sets for reproducible performance evaluation in industrial environments. In: 2015
IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA).
; 2015. doi:10.1109/etfa.2015.7301599'
apa: Block, D., Fliedner, N. H., Toews, D., & Meier, U. (2015). Wireless channel
measurement data sets for reproducible performance evaluation in industrial environments.
In 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation
(ETFA). Luxembourg, Luxembourg. https://doi.org/10.1109/etfa.2015.7301599
bjps: Block D et al. (2015) Wireless Channel Measurement Data Sets
for Reproducible Performance Evaluation in Industrial Environments. 2015 IEEE
20th Conference on Emerging Technologies & Factory Automation (ETFA).
chicago: Block, Dimitri, Niels Hendrik Fliedner, Daniel Toews, and Uwe Meier. “Wireless
Channel Measurement Data Sets for Reproducible Performance Evaluation in Industrial
Environments.” In 2015 IEEE 20th Conference on Emerging Technologies &
Factory Automation (ETFA), 2015. https://doi.org/10.1109/etfa.2015.7301599.
chicago-de: 'Block, Dimitri, Niels Hendrik Fliedner, Daniel Toews und Uwe Meier.
2015. Wireless channel measurement data sets for reproducible performance evaluation
in industrial environments. In: 2015 IEEE 20th Conference on Emerging Technologies
& Factory Automation (ETFA). doi:10.1109/etfa.2015.7301599,
.'
din1505-2-1: 'Block, Dimitri ; Fliedner, Niels Hendrik ; Toews,
Daniel ; Meier, Uwe: Wireless
channel measurement data sets for reproducible performance evaluation in industrial
environments. In: 2015 IEEE 20th Conference on Emerging Technologies &
Factory Automation (ETFA), 2015'
havard: 'D. Block, N.H. Fliedner, D. Toews, U. Meier, Wireless channel measurement
data sets for reproducible performance evaluation in industrial environments,
in: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation
(ETFA), 2015.'
ieee: D. Block, N. H. Fliedner, D. Toews, and U. Meier, “Wireless channel measurement
data sets for reproducible performance evaluation in industrial environments,”
in 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation
(ETFA), Luxembourg, Luxembourg, 2015.
mla: Block, Dimitri, et al. “Wireless Channel Measurement Data Sets for Reproducible
Performance Evaluation in Industrial Environments.” 2015 IEEE 20th Conference
on Emerging Technologies & Factory Automation (ETFA), 2015, doi:10.1109/etfa.2015.7301599.
short: 'D. Block, N.H. Fliedner, D. Toews, U. Meier, in: 2015 IEEE 20th Conference
on Emerging Technologies & Factory Automation (ETFA), 2015.'
ufg: 'Block, Dimitri et. al. (2015): Wireless channel measurement data sets
for reproducible performance evaluation in industrial environments, in: 2015
IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA).'
van: 'Block D, Fliedner NH, Toews D, Meier U. Wireless channel measurement data
sets for reproducible performance evaluation in industrial environments. In: 2015
IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA).
2015.'
conference:
end_date: 2015-09-11
location: ' Luxembourg, Luxembourg'
name: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA)
start_date: 2015-09-08
date_created: 2020-05-18T15:20:18Z
date_updated: 2023-03-15T13:49:39Z
department:
- _id: DEP5000
doi: 10.1109/etfa.2015.7301599
keyword:
- Wireless communication
- Wireless sensor networks
- Antenna measurements
- Attenuation measurement
- Extraterrestrial measurements
- Time-frequency analysis
language:
- iso: eng
main_file_link:
- url: https://ieeexplore.ieee.org/document/7301599
publication: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation
(ETFA)
publication_identifier:
isbn:
- '9781467379298'
publication_status: published
quality_controlled: '1'
status: public
title: Wireless channel measurement data sets for reproducible performance evaluation
in industrial environments
type: conference
user_id: '57956'
year: 2015
...
---
_id: '4493'
abstract:
- lang: eng
text: 'This paper provides an introduction into the evolution of information and
communication technology and illustrates its usage in the work domain. The paper
is sub-divided into two parts. The first part gives an overview over the different
phases of information processing in the work domain. It starts by charting the
past and present usage of computers in work environments and shows current technological
trends, which are likely to influence future business applications. The second
part starts by briefly describing, how the usage of computers changed business
processes in the past, and presents first Ambient Intelligence applications based
on identification and localization information, which are already used in the
production and retail sector. Based on current systems and prototype applications,
the paper gives an outlook of how Ambient Intelligence technologies could change
business processes in the future. '
author:
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: Röcker C. Chances and Challenges of Intelligent Technologies in the Production
and Retail Sector. International Journal of Information and Communication Engineering.
2010;4(7):1830-1841. doi:10.5281/zenodo.1063024
apa: Röcker, C. (2010). Chances and Challenges of Intelligent Technologies in the
Production and Retail Sector. International Journal of Information and Communication
Engineering, 4(7), 1830–1841. https://doi.org/10.5281/zenodo.1063024
bjps: Röcker C (2010) Chances and Challenges of Intelligent Technologies
in the Production and Retail Sector. International Journal of Information and
Communication Engineering 4, 1830–1841.
chicago: 'Röcker, Carsten. “Chances and Challenges of Intelligent Technologies in
the Production and Retail Sector.” International Journal of Information and
Communication Engineering 4, no. 7 (2010): 1830–41. https://doi.org/10.5281/zenodo.1063024.'
chicago-de: 'Röcker, Carsten. 2010. Chances and Challenges of Intelligent Technologies
in the Production and Retail Sector. International Journal of Information and
Communication Engineering 4, Nr. 7: 1830–1841. doi:10.5281/zenodo.1063024,
.'
din1505-2-1: 'Röcker, Carsten: Chances
and Challenges of Intelligent Technologies in the Production and Retail Sector.
In: International Journal of Information and Communication Engineering
Bd. 4. [S.l.], World Academy of Science, Engineering and Technology, WASET (2010),
Nr. 7, S. 1830–1841'
havard: C. Röcker, Chances and Challenges of Intelligent Technologies in the Production
and Retail Sector, International Journal of Information and Communication Engineering.
4 (2010) 1830–1841.
ieee: C. Röcker, “Chances and Challenges of Intelligent Technologies in the Production
and Retail Sector,” International Journal of Information and Communication
Engineering, vol. 4, no. 7, pp. 1830–1841, 2010.
mla: Röcker, Carsten. “Chances and Challenges of Intelligent Technologies in the
Production and Retail Sector.” International Journal of Information and Communication
Engineering, vol. 4, no. 7, World Academy of Science, Engineering and Technology,
WASET , 2010, pp. 1830–41, doi:10.5281/zenodo.1063024.
short: C. Röcker, International Journal of Information and Communication Engineering
4 (2010) 1830–1841.
ufg: 'Röcker, Carsten (2010): Chances and Challenges of Intelligent Technologies
in the Production and Retail Sector, in: International Journal of Information
and Communication Engineering 4 (7), S. 1830–1841.'
van: Röcker C. Chances and Challenges of Intelligent Technologies in the Production
and Retail Sector. International Journal of Information and Communication Engineering.
2010;4(7):1830–41.
date_created: 2021-01-21T09:21:25Z
date_updated: 2023-03-15T13:49:53Z
department:
- _id: DEP5023
doi: 10.5281/zenodo.1063024
extern: '1'
intvolume: ' 4'
issue: '7'
keyword:
- Ubiquitous Computing
- Ambient intelligence
- business applications
- Radio Frequency Identification (RFID)
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 1830 - 1841
place: '[S.l.]'
publication: International Journal of Information and Communication Engineering
publication_identifier:
eissn:
- 1307-6892
issn:
- 2010-4057
publication_status: published
publisher: 'World Academy of Science, Engineering and Technology, WASET '
status: public
title: Chances and Challenges of Intelligent Technologies in the Production and Retail
Sector
type: journal_article
user_id: '15514'
volume: 4
year: 2010
...
---
_id: '8274'
abstract:
- lang: eng
text: The need for multiple radio systems in overlapping regions of a factory plant
introduces a coexistence problem. The current research challenge is to design
and realize radio systems that should be able to achieve a desired quality of
service (QoS) in this coexisting environment. Currently transmission resources
of hyperspace are not properly exploited. The cognitive radio (CR), which can
adapt to the environmental changes by reconfiguring itself, can be used to implement
intelligent radio systems to exploit the orthogonal nature of multiple dimensions
of hyperspace to maintain the desired QoS in coexisting factory environments.
We present initial results of a coexistence optimized CR which can exploit frequency
and power, which are two of several dimensions of hyperspace, to improve its QoS
in coexisting environments.
author:
- first_name: Kaleem
full_name: Ahmad, Kaleem
last_name: Ahmad
- first_name: Uwe
full_name: Meier, Uwe
id: '1143'
last_name: Meier
- first_name: Andreas
full_name: Pape, Andreas
last_name: Pape
- first_name: Halina
full_name: Kwasnicka, Halina
last_name: Kwasnicka
- first_name: Bjoern
full_name: Griese, Bjoern
last_name: Griese
citation:
ama: Ahmad K, Meier U, Pape A, Kwasnicka H, Griese B. A Generic Cognitive Radio
for Evaluating Coexistence Optimized Industrial Automation Systems. IEEE ;
2009. doi:10.1109/SAHCNW.2009.5172916
apa: Ahmad, K., Meier, U., Pape, A., Kwasnicka, H., & Griese, B. (2009). A Generic
Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems.
In 2009 6th IEEE Annual Communications Society Conference on Sensor, Mesh
and Ad Hoc Communications and Networks Workshops. 6th IEEE Annual Communications
Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops,
Rome, Italy . IEEE . https://doi.org/10.1109/SAHCNW.2009.5172916
bjps: 'Ahmad K et al. (2009) A Generic Cognitive Radio for Evaluating
Coexistence Optimized Industrial Automation Systems. Piscataway, NJ: IEEE
.'
chicago: 'Ahmad, Kaleem, Uwe Meier, Andreas Pape, Halina Kwasnicka, and Bjoern Griese.
A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation
Systems. 2009 6th IEEE Annual Communications Society Conference on Sensor,
Mesh and Ad Hoc Communications and Networks Workshops. Piscataway, NJ: IEEE
, 2009. https://doi.org/10.1109/SAHCNW.2009.5172916.'
chicago-de: 'Ahmad, Kaleem, Uwe Meier, Andreas Pape, Halina Kwasnicka und Bjoern
Griese. 2009. A Generic Cognitive Radio for Evaluating Coexistence Optimized
Industrial Automation Systems. 2009 6th IEEE Annual Communications Society
Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops.
Piscataway, NJ: IEEE . doi:10.1109/SAHCNW.2009.5172916,
.'
din1505-2-1: 'Ahmad, Kaleem ; Meier, Uwe ; Pape,
Andreas ; Kwasnicka, Halina
; Griese, Bjoern: A Generic Cognitive
Radio for Evaluating Coexistence Optimized Industrial Automation Systems.
Piscataway, NJ : IEEE , 2009'
havard: K. Ahmad, U. Meier, A. Pape, H. Kwasnicka, B. Griese, A Generic Cognitive
Radio for Evaluating Coexistence Optimized Industrial Automation Systems, IEEE
, Piscataway, NJ, 2009.
ieee: 'K. Ahmad, U. Meier, A. Pape, H. Kwasnicka, and B. Griese, A Generic Cognitive
Radio for Evaluating Coexistence Optimized Industrial Automation Systems.
Piscataway, NJ: IEEE , 2009. doi: 10.1109/SAHCNW.2009.5172916.'
mla: Ahmad, Kaleem, et al. “A Generic Cognitive Radio for Evaluating Coexistence
Optimized Industrial Automation Systems.” 2009 6th IEEE Annual Communications
Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops,
IEEE , 2009, https://doi.org/10.1109/SAHCNW.2009.5172916.
short: K. Ahmad, U. Meier, A. Pape, H. Kwasnicka, B. Griese, A Generic Cognitive
Radio for Evaluating Coexistence Optimized Industrial Automation Systems, IEEE
, Piscataway, NJ, 2009.
ufg: 'Ahmad, Kaleem u. a.: A Generic Cognitive Radio for Evaluating Coexistence
Optimized Industrial Automation Systems, Piscataway, NJ 2009.'
van: 'Ahmad K, Meier U, Pape A, Kwasnicka H, Griese B. A Generic Cognitive Radio
for Evaluating Coexistence Optimized Industrial Automation Systems. 2009 6th
IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications
and Networks Workshops. Piscataway, NJ: IEEE ; 2009.'
conference:
end_date: 2009-06-26
location: 'Rome, Italy '
name: 6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc
Communications and Networks Workshops
start_date: 2009-06-22
date_created: 2022-05-17T14:05:13Z
date_updated: 2023-07-28T13:23:19Z
department:
- _id: DEP5000
- _id: DEP5014
doi: 10.1109/SAHCNW.2009.5172916
keyword:
- Cognitive radio
- Quality of service
- Space technology
- Frequency
- Production facilities
- Chromium
- Manufacturing automation
- Intelligent systems
- Polarization
- Testing
language:
- iso: eng
place: Piscataway, NJ
publication: ' 2009 6th IEEE Annual Communications Society Conference on Sensor, Mesh
and Ad Hoc Communications and Networks Workshops'
publication_identifier:
isbn:
- 978-1-4244-3938-6
publication_status: published
publisher: 'IEEE '
status: public
title: A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation
Systems
type: conference_editor_article
user_id: '83781'
year: '2009'
...
---
_id: '4678'
abstract:
- lang: eng
text: This paper provides an introduction into the evolution of information and
communication technology and illustrates its usage in the work domain. The paper
is sub-divided into two parts. The first part gives an overview over the different
phases of information processing in the work domain. It starts by charting the
past and present usage of computers in work environments and shows current technological
trends, which are likely to influence future business applications. The second
part starts by briefly describing, how the usage of computers changed business
processes in the past, and presents first Ambient Intelligence applications based
on identification and localization information, which are already used in the
production and retail sector. Based on current systems and prototype applications,
the paper gives an outlook of how Ambient Intelligence technologies could change
business processes in the future.
author:
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Röcker C. Ambient Intelligence in the Production and Retail Sector: Emerging
Opportunities and Potential Pitfalls. In: Proceedings of the International
Conference on Innovation, Management and Technology (ICIMT’09). Vol 3. International
Journal of Information and Communication Engineering. World Academy of Science,
Engineering and Technology; 2009:592-603. doi:10.5281/zenodo.1083085'
apa: 'Röcker, C. (2009). Ambient Intelligence in the Production and Retail Sector:
Emerging Opportunities and Potential Pitfalls. In Proceedings of the International
Conference on Innovation, Management and Technology (ICIMT’09) (Vol. 3, pp.
592–603). Tokyo, Japan: World Academy of Science, Engineering and Technology.
https://doi.org/10.5281/zenodo.1083085'
bjps: 'Röcker C (2009) Ambient Intelligence in the Production and Retail
Sector: Emerging Opportunities and Potential Pitfalls. Proceedings of the International
Conference on Innovation, Management and Technology (ICIMT’09), vol. 3. World
Academy of Science, Engineering and Technology, pp. 592–603.'
chicago: 'Röcker, Carsten. “Ambient Intelligence in the Production and Retail Sector:
Emerging Opportunities and Potential Pitfalls.” In Proceedings of the International
Conference on Innovation, Management and Technology (ICIMT’09), 3:592–603.
International Journal of Information and Communication Engineering. World Academy
of Science, Engineering and Technology, 2009. https://doi.org/10.5281/zenodo.1083085.'
chicago-de: 'Röcker, Carsten. 2009. Ambient Intelligence in the Production and Retail
Sector: Emerging Opportunities and Potential Pitfalls. In: Proceedings of the
International Conference on Innovation, Management and Technology (ICIMT’09),
3:592–603. International Journal of Information and Communication Engineering.
World Academy of Science, Engineering and Technology. doi:10.5281/zenodo.1083085,
.'
din1505-2-1: 'Röcker, Carsten: Ambient
Intelligence in the Production and Retail Sector: Emerging Opportunities and Potential
Pitfalls. In: Proceedings of the International Conference on Innovation, Management
and Technology (ICIMT’09), International Journal of Information and Communication
Engineering. Bd. 3 : World Academy of Science, Engineering and Technology,
2009, S. 592–603'
havard: 'C. Röcker, Ambient Intelligence in the Production and Retail Sector: Emerging
Opportunities and Potential Pitfalls, in: Proceedings of the International Conference
on Innovation, Management and Technology (ICIMT’09), World Academy of Science,
Engineering and Technology, 2009: pp. 592–603.'
ieee: 'C. Röcker, “Ambient Intelligence in the Production and Retail Sector: Emerging
Opportunities and Potential Pitfalls,” in Proceedings of the International
Conference on Innovation, Management and Technology (ICIMT’09), Tokyo, Japan,
2009, vol. 3, no. 5, pp. 592–603.'
mla: 'Röcker, Carsten. “Ambient Intelligence in the Production and Retail Sector:
Emerging Opportunities and Potential Pitfalls.” Proceedings of the International
Conference on Innovation, Management and Technology (ICIMT’09), vol. 3, no.
5, World Academy of Science, Engineering and Technology, 2009, pp. 592–603, doi:10.5281/zenodo.1083085.'
short: 'C. Röcker, in: Proceedings of the International Conference on Innovation,
Management and Technology (ICIMT’09), World Academy of Science, Engineering and
Technology, 2009, pp. 592–603.'
ufg: 'Röcker, Carsten (2009): Ambient Intelligence in the Production and
Retail Sector: Emerging Opportunities and Potential Pitfalls, in: Proceedings
of the International Conference on Innovation, Management and Technology (ICIMT’09)
(=International Journal of Information and Communication Engineering 3),
S. 592–603.'
van: 'Röcker C. Ambient Intelligence in the Production and Retail Sector: Emerging
Opportunities and Potential Pitfalls. In: Proceedings of the International Conference
on Innovation, Management and Technology (ICIMT’09). World Academy of Science,
Engineering and Technology; 2009. p. 592–603. (International Journal of Information
and Communication Engineering; vol. 3).'
conference:
end_date: 200905-29
location: Tokyo, Japan
name: International Conference on Innovation, Management and Technology (ICIMT'09)
start_date: 2009-05-27
date_created: 2021-01-28T11:53:53Z
date_updated: 2023-03-15T13:49:54Z
department:
- _id: DEP5023
doi: 10.5281/zenodo.1083085
extern: '1'
intvolume: ' 3'
issue: '5'
keyword:
- Ambient Intelligence
- Ubiquitous Computing
- Business Applications
- Radio Frequency Identification (RFID).
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 592 - 603
publication: Proceedings of the International Conference on Innovation, Management
and Technology (ICIMT'09)
publication_identifier:
eissn:
- 1307-6892
publication_status: published
publisher: World Academy of Science, Engineering and Technology
related_material:
link:
- relation: original
url: https://publications.waset.org/pdf/14497
series_title: International Journal of Information and Communication Engineering
status: public
title: 'Ambient Intelligence in the Production and Retail Sector: Emerging Opportunities
and Potential Pitfalls'
type: conference
user_id: '15514'
volume: 3
year: 2009
...