--- _id: '13337' abstract: - lang: eng text: In manufacturing systems with a job shop organization, queues between workstations create an intermittent process flow, allowing workers to schedule tasks entering the queue based on their needs and preferences. The resulting scheduling autonomy of individual workers often leads to inefficiencies in the overall production process due to the loss of control. Companies are therefore increasingly using algorithmic scheduling systems to assign task sequences to workers, thereby drastically reducing their autonomy and negatively affecting their job performance and well-being. This paper extends the existing flexible job shop scheduling problem by sequencing preferences (FJSPSP) to incorporate a human-centered perspective by predicting workers’ task sequencing decisions using learning-to-rank (LTR) methods. By learning workers’ individual task sequencing preferences, it becomes possible to predict the processing sequence based on task characteristics. The scheduling algorithm for the FJSPSP presented in the paper incorporates workers’ learned sequencing preferences as constraints. Considering workers’ learned task sequencing decisions, the FJSPSP optimizes only task assignments to maintain workers’ autonomy over task sequences. The contributions of this paper are fourfold, namely, (1) presenting an approach to elicit sequencing decision datasets from workers, (2) demonstrating the successful prediction of humans’ and an actual worker’s task sequencing decisions with LTR, (3) formulating the FJSPSP variant that integrates workers’ sequencing preferences as constraints and proving its effectiveness in a simulation study, and (4) consolidating these steps into an explainable artificial intelligence (XAI)- and LTR-enabled sociotechnical system design framework. The paper closes with a discussion of the overall methodology and future research perspectives. article_type: original author: - first_name: Jan-Phillip full_name: Herrmann, Jan-Phillip id: '86180' last_name: Herrmann - first_name: Sven full_name: Tackenberg, Sven id: '71470' last_name: Tackenberg - first_name: Tharsika Pakeerathan full_name: Srirajan, Tharsika Pakeerathan last_name: Srirajan - first_name: Verena full_name: Nitsch, Verena last_name: Nitsch citation: ama: 'Herrmann JP, Tackenberg S, Srirajan TP, Nitsch V. Incorporating scheduling autonomy of workers into flexible job shop scheduling: Learning and balancing decentralized task sequencing decisions with overall scheduling performance. Journal of Manufacturing Systems. 2026;84(2):541-560. doi:10.1016/j.jmsy.2025.12.020' apa: 'Herrmann, J.-P., Tackenberg, S., Srirajan, T. P., & Nitsch, V. (2026). Incorporating scheduling autonomy of workers into flexible job shop scheduling: Learning and balancing decentralized task sequencing decisions with overall scheduling performance. Journal of Manufacturing Systems, 84(2), 541–560. https://doi.org/10.1016/j.jmsy.2025.12.020' bjps: 'Herrmann J-P et al. (2026) Incorporating Scheduling Autonomy of Workers into Flexible Job Shop Scheduling: Learning and Balancing Decentralized Task Sequencing Decisions with Overall Scheduling Performance. Journal of Manufacturing Systems 84, 541–560.' chicago: 'Herrmann, Jan-Phillip, Sven Tackenberg, Tharsika Pakeerathan Srirajan, and Verena Nitsch. “Incorporating Scheduling Autonomy of Workers into Flexible Job Shop Scheduling: Learning and Balancing Decentralized Task Sequencing Decisions with Overall Scheduling Performance.” Journal of Manufacturing Systems 84, no. 2 (2026): 541–60. https://doi.org/10.1016/j.jmsy.2025.12.020.' chicago-de: 'Herrmann, Jan-Phillip, Sven Tackenberg, Tharsika Pakeerathan Srirajan und Verena Nitsch. 2026. Incorporating scheduling autonomy of workers into flexible job shop scheduling: Learning and balancing decentralized task sequencing decisions with overall scheduling performance. Journal of Manufacturing Systems 84, Nr. 2: 541–560. doi:10.1016/j.jmsy.2025.12.020, .' din1505-2-1: 'Herrmann, Jan-Phillip ; Tackenberg, Sven ; Srirajan, Tharsika Pakeerathan ; Nitsch, Verena: Incorporating scheduling autonomy of workers into flexible job shop scheduling: Learning and balancing decentralized task sequencing decisions with overall scheduling performance. In: Journal of Manufacturing Systems Bd. 84. Amsterdam, Elsevier BV (2026), Nr. 2, S. 541–560' havard: 'J.-P. Herrmann, S. Tackenberg, T.P. Srirajan, V. Nitsch, Incorporating scheduling autonomy of workers into flexible job shop scheduling: Learning and balancing decentralized task sequencing decisions with overall scheduling performance, Journal of Manufacturing Systems. 84 (2026) 541–560.' ieee: 'J.-P. Herrmann, S. Tackenberg, T. P. Srirajan, and V. Nitsch, “Incorporating scheduling autonomy of workers into flexible job shop scheduling: Learning and balancing decentralized task sequencing decisions with overall scheduling performance,” Journal of Manufacturing Systems, vol. 84, no. 2, pp. 541–560, 2026, doi: 10.1016/j.jmsy.2025.12.020.' mla: 'Herrmann, Jan-Phillip, et al. “Incorporating Scheduling Autonomy of Workers into Flexible Job Shop Scheduling: Learning and Balancing Decentralized Task Sequencing Decisions with Overall Scheduling Performance.” Journal of Manufacturing Systems, vol. 84, no. 2, 2026, pp. 541–60, https://doi.org/10.1016/j.jmsy.2025.12.020.' short: J.-P. Herrmann, S. Tackenberg, T.P. Srirajan, V. Nitsch, Journal of Manufacturing Systems 84 (2026) 541–560. ufg: 'Herrmann, Jan-Phillip u. a.: Incorporating scheduling autonomy of workers into flexible job shop scheduling: Learning and balancing decentralized task sequencing decisions with overall scheduling performance, in: Journal of Manufacturing Systems 84 (2026), H. 2,  S. 541–560.' van: 'Herrmann JP, Tackenberg S, Srirajan TP, Nitsch V. Incorporating scheduling autonomy of workers into flexible job shop scheduling: Learning and balancing decentralized task sequencing decisions with overall scheduling performance. Journal of Manufacturing Systems. 2026;84(2):541–60.' date_created: 2026-01-12T08:29:09Z date_updated: 2026-01-12T08:54:27Z department: - _id: DEP7027 doi: 10.1016/j.jmsy.2025.12.020 intvolume: ' 84' issue: '2' keyword: - Human-centered scheduling - Job autonomy - Learning-to-rank - Flexible job shop scheduling - Human decision-making - Explainable artificial intelligence language: - iso: eng page: 541-560 place: Amsterdam publication: Journal of Manufacturing Systems publication_identifier: issn: - 0278-6125 publication_status: published publisher: Elsevier BV quality_controlled: '1' status: public title: 'Incorporating scheduling autonomy of workers into flexible job shop scheduling: Learning and balancing decentralized task sequencing decisions with overall scheduling performance' type: scientific_journal_article user_id: '83781' volume: 84 year: '2026' ... --- _id: '13880' abstract: - lang: eng text: "Objective\r\nEpidemiological evidence on muscle dysmorphia (MD) remains limited, and self-report algorithm-defined estimates may depend on sampling and case definitions. We examined how algorithm-defined MD estimates and exploratory correlates varied across weighting and case-definition scenarios in a gender-balanced German online sample.\r\nMethod\r\nIn this cross-sectional web-based study, 1468 adults from Germany completed self-report measures: 739 (50.3%) men, 706 (48.1%) women, 21 (1.4%) nonbinary/diverse participants, and 2 (0.1%) who preferred not to disclose their gender. Algorithm-defined MD was estimated using a self-report algorithm derived from prior epidemiological work. Estimates were compared across four scenarios combining unweighted versus age- and gender-weighted analyses with global versus gender-specific criterion A cutoffs. Logistic regression models examined correlates across weighted and unweighted analytic specifications.\r\nResults\r\nAlgorithm-defined estimates varied substantially across operationalizations. The unweighted global algorithm yielded an estimate of 6.2% overall and 11.0% in men. The weighted gender-specific scenario yielded 2.6% overall, 3.5% in men, and 1.7% in women. Across regression specifications, lower BMI and higher identity disturbance were the most consistent correlates of algorithm-defined MD. Female gender showed lower odds in pooled models, particularly under the global cutoff, but this finding should be interpreted cautiously.\r\nDiscussion\r\nSelf-report algorithm-defined MD may affect a meaningful minority of adults, but estimates depend strongly on weighting strategy and case definition. These findings highlight the need for transparent reporting of algorithmic operationalizations.\r\n" article_number: eat.70170 author: - first_name: Christopher full_name: Zaiser, Christopher last_name: Zaiser - first_name: Nora M. full_name: Laskowski, Nora M. last_name: Laskowski - first_name: Georg full_name: Halbeisen, Georg id: '85780' last_name: Halbeisen orcid: 0000-0002-9529-2215 - first_name: Marietta full_name: Lieb, Marietta last_name: Lieb - first_name: Georgios full_name: Paslakis, Georgios last_name: Paslakis citation: ama: Zaiser C, Laskowski NM, Halbeisen G, Lieb M, Paslakis G. Algorithm‐Defined Muscle Dysmorphia Estimates Across Weighting and Case‐Definition Strategies in a Gender‐Balanced Adult Online Sample. International Journal of Eating Disorders. Published online 2026. doi:10.1002/eat.70170 apa: Zaiser, C., Laskowski, N. M., Halbeisen, G., Lieb, M., & Paslakis, G. (2026). Algorithm‐Defined Muscle Dysmorphia Estimates Across Weighting and Case‐Definition Strategies in a Gender‐Balanced Adult Online Sample. International Journal of Eating Disorders, Article eat. 70170. https://doi.org/10.1002/eat.70170 bjps: Zaiser C et al. (2026) Algorithm‐Defined Muscle Dysmorphia Estimates Across Weighting and Case‐Definition Strategies in a Gender‐Balanced Adult Online Sample. International Journal of Eating Disorders. chicago: Zaiser, Christopher, Nora M. Laskowski, Georg Halbeisen, Marietta Lieb, and Georgios Paslakis. “Algorithm‐Defined Muscle Dysmorphia Estimates Across Weighting and Case‐Definition Strategies in a Gender‐Balanced Adult Online Sample.” International Journal of Eating Disorders, 2026. https://doi.org/10.1002/eat.70170. chicago-de: Zaiser, Christopher, Nora M. Laskowski, Georg Halbeisen, Marietta Lieb und Georgios Paslakis. 2026. Algorithm‐Defined Muscle Dysmorphia Estimates Across Weighting and Case‐Definition Strategies in a Gender‐Balanced Adult Online Sample. International Journal of Eating Disorders. doi:10.1002/eat.70170, . din1505-2-1: 'Zaiser, Christopher ; Laskowski, Nora M. ; Halbeisen, Georg ; Lieb, Marietta ; Paslakis, Georgios: Algorithm‐Defined Muscle Dysmorphia Estimates Across Weighting and Case‐Definition Strategies in a Gender‐Balanced Adult Online Sample. In: International Journal of Eating Disorders. New York, NY , Wiley (2026)' havard: C. Zaiser, N.M. Laskowski, G. Halbeisen, M. Lieb, G. Paslakis, Algorithm‐Defined Muscle Dysmorphia Estimates Across Weighting and Case‐Definition Strategies in a Gender‐Balanced Adult Online Sample, International Journal of Eating Disorders. (2026). ieee: 'C. Zaiser, N. M. Laskowski, G. Halbeisen, M. Lieb, and G. Paslakis, “Algorithm‐Defined Muscle Dysmorphia Estimates Across Weighting and Case‐Definition Strategies in a Gender‐Balanced Adult Online Sample,” International Journal of Eating Disorders, Art. no. eat. 70170, 2026, doi: 10.1002/eat.70170.' mla: Zaiser, Christopher, et al. “Algorithm‐Defined Muscle Dysmorphia Estimates Across Weighting and Case‐Definition Strategies in a Gender‐Balanced Adult Online Sample.” International Journal of Eating Disorders, eat. 70170, 2026, https://doi.org/10.1002/eat.70170. short: C. Zaiser, N.M. Laskowski, G. Halbeisen, M. Lieb, G. Paslakis, International Journal of Eating Disorders (2026). ufg: 'Zaiser, Christopher u. a.: Algorithm‐Defined Muscle Dysmorphia Estimates Across Weighting and Case‐Definition Strategies in a Gender‐Balanced Adult Online Sample, in: International Journal of Eating Disorders (2026).' van: Zaiser C, Laskowski NM, Halbeisen G, Lieb M, Paslakis G. Algorithm‐Defined Muscle Dysmorphia Estimates Across Weighting and Case‐Definition Strategies in a Gender‐Balanced Adult Online Sample. International Journal of Eating Disorders. 2026; date_created: 2026-07-28T08:39:30Z date_updated: 2026-07-31T08:51:40Z department: - _id: DEP1500 doi: 10.1002/eat.70170 keyword: - body image - case definition - eating disorders - epidemiology - gender differences - muscle dysmorphia - online sample - prevalence - psychometrics - weighting language: - iso: eng place: 'New York, NY ' publication: International Journal of Eating Disorders publication_identifier: eissn: - 1098-108X issn: - 0276-3478 publication_status: published publisher: Wiley quality_controlled: '1' status: public title: Algorithm‐Defined Muscle Dysmorphia Estimates Across Weighting and Case‐Definition Strategies in a Gender‐Balanced Adult Online Sample type: scientific_journal_article user_id: '83781' year: '2026' ... --- _id: '14070' abstract: - lang: eng text: "Deploying digital twins across the broader building stock is constrained by a key bottleneck: high-quality 3D content from LiDAR or photogrammetry remains labor-intensive and difficult to scale. We introduce Generative Twins (GT), a workflow that shifts digital twin creation from explicit geometric reconstruction toward probabilistic 3D synthesis. The pipeline takes a\r\nsingle street-level façade photograph, corrects perspective distortion and removes occlusions, uses an instruction-conditioned multimodal image model to synthesise an isometric view of the building, and passes that view to an image-to-3D reconstruction model that leverages learned shape priors to produce a textured mesh without manual modelling. Three image to-3D platforms (Hitem3D, Hyper3D and Hunyuan3D 3.1) are compared on identical isometric inputs and assessed on architectural boundary clarity. We demonstrate GT through two applied cases: (i) reconstruction of ordinary residential streets in Detmold as stimuli for a virtual-reality study of multi sensory urban perception, and (ii) Green Editor, a design-exploration tool in which façade greenery is added or removed at the image layer before mesh generation.\r\nTogether these cases position Generative Twins as a scalable pathway for the digitization of ordinary building stock, with emphasis on controllability, editability, and iterative design workflows." author: - first_name: Mohamed Khaled full_name: Ashmawy, Mohamed Khaled id: '81286' last_name: Ashmawy - first_name: Buse full_name: Akay, Buse id: '88405' last_name: Akay - first_name: Alvaro full_name: Balderrama, Alvaro id: '74171' last_name: Balderrama orcid: 0000-0002-4118-2838 citation: ama: 'Ashmawy MK, Akay B, Balderrama A. Towards Generative Twins: An AI Based Pipeline from Explicit 3D Reconstruction to Probabilistic Synthesis. Vol 1. eCAADe; 2026. doi:10.52842/conf.ecaade.2026.1.619' apa: 'Ashmawy, M. K., Akay, B., & Balderrama, A. (2026). Towards Generative Twins: An AI Based Pipeline from Explicit 3D Reconstruction to Probabilistic Synthesis. In eCAADe proceedings (Vol. 1). eCAADe. https://doi.org/10.52842/conf.ecaade.2026.1.619' bjps: 'Ashmawy MK, Akay B and Balderrama A (2026) Towards Generative Twins: An AI Based Pipeline from Explicit 3D Reconstruction to Probabilistic Synthesis. eCAADe.' chicago: 'Ashmawy, Mohamed Khaled, Buse Akay, and Alvaro Balderrama. Towards Generative Twins: An AI Based Pipeline from Explicit 3D Reconstruction to Probabilistic Synthesis. ECAADe Proceedings. Vol. 1. eCAADe, 2026. https://doi.org/10.52842/conf.ecaade.2026.1.619.' chicago-de: 'Ashmawy, Mohamed Khaled, Buse Akay und Alvaro Balderrama. 2026. Towards Generative Twins: An AI Based Pipeline from Explicit 3D Reconstruction to Probabilistic Synthesis. eCAADe proceedings. Bd. 1. eCAADe. doi:10.52842/conf.ecaade.2026.1.619, .' din1505-2-1: 'Ashmawy, Mohamed Khaled ; Akay, Buse ; Balderrama, Alvaro: Towards Generative Twins: An AI Based Pipeline from Explicit 3D Reconstruction to Probabilistic Synthesis. Bd. 1 : eCAADe, 2026' havard: 'M.K. Ashmawy, B. Akay, A. Balderrama, Towards Generative Twins: An AI Based Pipeline from Explicit 3D Reconstruction to Probabilistic Synthesis, eCAADe, 2026.' ieee: 'M. K. Ashmawy, B. Akay, and A. Balderrama, Towards Generative Twins: An AI Based Pipeline from Explicit 3D Reconstruction to Probabilistic Synthesis, vol. 1. eCAADe, 2026. doi: 10.52842/conf.ecaade.2026.1.619.' mla: 'Ashmawy, Mohamed Khaled, et al. “Towards Generative Twins: An AI Based Pipeline from Explicit 3D Reconstruction to Probabilistic Synthesis.” ECAADe Proceedings, vol. 1, eCAADe, 2026, https://doi.org/10.52842/conf.ecaade.2026.1.619.' short: 'M.K. Ashmawy, B. Akay, A. Balderrama, Towards Generative Twins: An AI Based Pipeline from Explicit 3D Reconstruction to Probabilistic Synthesis, eCAADe, 2026.' ufg: 'Ashmawy, Mohamed Khaled/Akay, Buse/Balderrama, Alvaro: Towards Generative Twins: An AI Based Pipeline from Explicit 3D Reconstruction to Probabilistic Synthesis, Bd. 1, o. O. 2026.' van: 'Ashmawy MK, Akay B, Balderrama A. Towards Generative Twins: An AI Based Pipeline from Explicit 3D Reconstruction to Probabilistic Synthesis. Vol. 1, eCAADe proceedings. eCAADe; 2026.' conference: end_date: 2026-09-11 location: Lübeck name: 44. eCAADe-Konferenz start_date: 2026-09-07 date_created: 2026-09-30T10:14:15Z date_updated: 2026-10-01T14:28:23Z department: - _id: DEP1634 doi: 10.52842/conf.ecaade.2026.1.619 intvolume: ' 1' keyword: - Digital Twins - Virtual Reality (VR - Artificial Intelligence (AI) - Image-to-3D - Generative Design. language: - iso: eng publication: eCAADe proceedings publication_identifier: issn: - 2684-1843 publication_status: published publisher: eCAADe status: public title: 'Towards Generative Twins: An AI Based Pipeline from Explicit 3D Reconstruction to Probabilistic Synthesis' type: conference_editor_article user_id: '83781' volume: 1 year: '2026' ... --- _id: '12445' author: - first_name: Colin full_name: Behrens, Colin id: '73022' last_name: Behrens citation: ama: 'Behrens C. Splatman : Automatisierte Erstellung von optimierten Datensets aus digitalen Szenen für Gaussian Splatting. Technische Hochschule Ostwestfalen-Lippe' apa: 'Behrens, C. (n.d.). Splatman : Automatisierte Erstellung von optimierten Datensets aus digitalen Szenen für Gaussian Splatting. Technische Hochschule Ostwestfalen-Lippe.' bjps: 'Behrens C (n.d.) Splatman : Automatisierte Erstellung von optimierten Datensets aus digitalen Szenen für Gaussian Splatting. Lemgo: Technische Hochschule Ostwestfalen-Lippe.' chicago: 'Behrens, Colin. Splatman : Automatisierte Erstellung von optimierten Datensets aus digitalen Szenen für Gaussian Splatting. Lemgo: Technische Hochschule Ostwestfalen-Lippe, n.d.' chicago-de: 'Behrens, Colin. Splatman : Automatisierte Erstellung von optimierten Datensets aus digitalen Szenen für Gaussian Splatting. Lemgo: Technische Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Behrens, Colin: Splatman : Automatisierte Erstellung von optimierten Datensets aus digitalen Szenen für Gaussian Splatting. Lemgo : Technische Hochschule Ostwestfalen-Lippe' havard: 'C. Behrens, Splatman : Automatisierte Erstellung von optimierten Datensets aus digitalen Szenen für Gaussian Splatting, Technische Hochschule Ostwestfalen-Lippe, Lemgo, n.d.' ieee: 'C. Behrens, Splatman : Automatisierte Erstellung von optimierten Datensets aus digitalen Szenen für Gaussian Splatting. Lemgo: Technische Hochschule Ostwestfalen-Lippe.' mla: 'Behrens, Colin. Splatman : Automatisierte Erstellung von optimierten Datensets aus digitalen Szenen für Gaussian Splatting. Technische Hochschule Ostwestfalen-Lippe.' short: 'C. Behrens, Splatman : Automatisierte Erstellung von optimierten Datensets aus digitalen Szenen für Gaussian Splatting, Technische Hochschule Ostwestfalen-Lippe, Lemgo, n.d.' ufg: 'Behrens, Colin: Splatman : Automatisierte Erstellung von optimierten Datensets aus digitalen Szenen für Gaussian Splatting, Lemgo o. J.' van: 'Behrens C. Splatman : Automatisierte Erstellung von optimierten Datensets aus digitalen Szenen für Gaussian Splatting. Lemgo: Technische Hochschule Ostwestfalen-Lippe; 69 p.' date_created: 2025-02-17T10:13:31Z date_updated: 2025-02-24T13:00:02Z ddc: - '004' department: - _id: DEP2001 file: - access_level: local content_type: application/pdf creator: mhd-u1u date_created: 2025-02-24T12:08:03Z date_updated: 2025-02-24T13:00:01Z file_id: '12492' file_name: Masterarbeit_Colin_Behrens.pdf file_size: 10558536 relation: main_file file_date_updated: 2025-02-24T13:00:01Z has_accepted_license: '1' keyword: - Gaussian - Splatting - Computergraphics - Scanning - 3D - NeRF - Datensätze language: - iso: ger page: '69' place: Lemgo publication_status: submitted publisher: Technische Hochschule Ostwestfalen-Lippe status: public supervisor: - first_name: Alexander full_name: Kutter, Alexander id: '83513' last_name: Kutter title: 'Splatman : Automatisierte Erstellung von optimierten Datensets aus digitalen Szenen für Gaussian Splatting' type: master_thesis user_id: '83781' year: '2025' ... --- _id: '12646' abstract: - lang: ger text: "Die präzise und kosteneffiziente 3D-Rekonstruktion industrieller Umgebungen gewinnt zu-nehmend an Bedeutung, insbesondere für digitale Zwillinge und automatisierte Inspektions-prozesse. Diese Arbeit untersucht die Entwicklung und Evaluierung eines multisensorischen Kamera-Setups, das mit Gaussian Splatting eine speichereffiziente und schnelle Modellierung von Produktionsumgebungen ermöglicht. Dafür wurde ein mobiles, autonomes System auf Basis eines MiR-Roboters entwickelt, das Bilddaten von verschiedenen USB-Kameras (Lo-gitech Brio, Anker C200), einer DSLR und iPhone Kamera sowie Raspberry Pi Kameras er-fasst und verarbeitet. \r\nDie zentrale Forschungsfrage adressiert die Effizienz, Bildqualität und Wirtschaftlichkeit von Gaussian Splatting im Vergleich zu etablierten Verfahren wie Photogrammetrie und LiDAR. Erste Testläufe mit DSLR-Aufnahmen und einer manuell rekonstruierten Pipeline zeigen, dass Gaussian Splatting hochdetaillierte Punktwolken generieren kann, jedoch mit Herausfor-derungen hinsichtlich Kameraausrichtung, Überlappung der Bilder und automatisierter Missi-onsplanung des Roboters konfrontiert ist. \r\nDie Ergebnisse zeigen, dass das System eine schnelle und speichereffiziente 3D-Rekonstruk-tion ermöglicht, jedoch in seiner aktuellen Form noch Optimierungspotenzial aufweist. Be-sonders die genaue Kalibrierung der Kameras, eine verbesserte Synchronisation der Bilder so-wie eine präzisere Steuerung des Roboters sind entscheidend für die Qualität der Punktwol-ken. Während Gaussian Splatting eine überzeugende Alternative zu klassischen Verfahren darstellt, ist die Systemstabilität derzeit noch abhängig von manuellen Eingriffen und Justie-rungen. \r\nZukünftige Arbeiten sollten sich darauf konzentrieren, die Automatisierung des gesamten Workflows weiter voranzutreiben, insbesondere durch den Einsatz verbesserter Kamera-A-lignment-Algorithmen, Hardware-Trigger für synchrone Bildaufnahme und Machine-Learn-ing-gestützte Bildoptimierung. Zudem könnte eine Erweiterung des Systems um zusätzliche Sensortechnologien wie Time-of-Flight-Sensoren oder LiDAR-Module helfen, die Detailge-nauigkeit weiter zu verbessern und eine robuste Echtzeit-Rekonstruktion zu ermöglichen. " author: - first_name: Sam full_name: Wiemann, Sam id: '78421' last_name: Wiemann citation: ama: Wiemann S. Entwicklung und Evaluierung eines multisensorischen Kamera-Setups zur 3D-Raumrekonstruktion in einer dynamischen Industrieumgebung mittels Gaussian Splatting auf einem autonomen Robotersystem. Technische Hochschule Ostwestfalen-Lippe; 2025. apa: Wiemann, S. (2025). Entwicklung und Evaluierung eines multisensorischen Kamera-Setups zur 3D-Raumrekonstruktion in einer dynamischen Industrieumgebung mittels Gaussian Splatting auf einem autonomen Robotersystem. Technische Hochschule Ostwestfalen-Lippe. bjps: 'Wiemann S (2025) Entwicklung und Evaluierung eines multisensorischen Kamera-Setups zur 3D-Raumrekonstruktion in einer dynamischen Industrieumgebung mittels Gaussian Splatting auf einem autonomen Robotersystem. Detmold: Technische Hochschule Ostwestfalen-Lippe.' chicago: 'Wiemann, Sam. Entwicklung und Evaluierung eines multisensorischen Kamera-Setups zur 3D-Raumrekonstruktion in einer dynamischen Industrieumgebung mittels Gaussian Splatting auf einem autonomen Robotersystem. Detmold: Technische Hochschule Ostwestfalen-Lippe, 2025.' chicago-de: 'Wiemann, Sam. 2025. Entwicklung und Evaluierung eines multisensorischen Kamera-Setups zur 3D-Raumrekonstruktion in einer dynamischen Industrieumgebung mittels Gaussian Splatting auf einem autonomen Robotersystem. Detmold: Technische Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Wiemann, Sam: Entwicklung und Evaluierung eines multisensorischen Kamera-Setups zur 3D-Raumrekonstruktion in einer dynamischen Industrieumgebung mittels Gaussian Splatting auf einem autonomen Robotersystem. Detmold : Technische Hochschule Ostwestfalen-Lippe, 2025' havard: S. Wiemann, Entwicklung und Evaluierung eines multisensorischen Kamera-Setups zur 3D-Raumrekonstruktion in einer dynamischen Industrieumgebung mittels Gaussian Splatting auf einem autonomen Robotersystem, Technische Hochschule Ostwestfalen-Lippe, Detmold, 2025. ieee: 'S. Wiemann, Entwicklung und Evaluierung eines multisensorischen Kamera-Setups zur 3D-Raumrekonstruktion in einer dynamischen Industrieumgebung mittels Gaussian Splatting auf einem autonomen Robotersystem. Detmold: Technische Hochschule Ostwestfalen-Lippe, 2025.' mla: Wiemann, Sam. Entwicklung und Evaluierung eines multisensorischen Kamera-Setups zur 3D-Raumrekonstruktion in einer dynamischen Industrieumgebung mittels Gaussian Splatting auf einem autonomen Robotersystem. Technische Hochschule Ostwestfalen-Lippe, 2025. short: S. Wiemann, Entwicklung und Evaluierung eines multisensorischen Kamera-Setups zur 3D-Raumrekonstruktion in einer dynamischen Industrieumgebung mittels Gaussian Splatting auf einem autonomen Robotersystem, Technische Hochschule Ostwestfalen-Lippe, Detmold, 2025. ufg: 'Wiemann, Sam: Entwicklung und Evaluierung eines multisensorischen Kamera-Setups zur 3D-Raumrekonstruktion in einer dynamischen Industrieumgebung mittels Gaussian Splatting auf einem autonomen Robotersystem, Detmold 2025.' van: 'Wiemann S. Entwicklung und Evaluierung eines multisensorischen Kamera-Setups zur 3D-Raumrekonstruktion in einer dynamischen Industrieumgebung mittels Gaussian Splatting auf einem autonomen Robotersystem. Detmold: Technische Hochschule Ostwestfalen-Lippe; 2025.' date_created: 2025-03-04T09:49:19Z date_updated: 2025-03-04T15:29:49Z ddc: - '000' department: - _id: DEP2001 file: - access_level: open_access content_type: application/pdf creator: sa3-8ag date_created: 2025-03-04T09:48:08Z date_updated: 2025-03-04T09:48:08Z file_id: '12647' file_name: Bachelorarbeit_Sam-Wiemann_15457078_ELSA.pdf file_size: 40444229 relation: main_file success: 1 file_date_updated: 2025-03-04T09:48:08Z has_accepted_license: '1' keyword: - 3D-Rekonstruktion - Gaussian Splatting - Photogrammetrie - LiDAR - autonome Robotik - digitale Zwillinge - Industrie 4.0 language: - iso: ger oa: '1' place: Detmold publication_status: published publisher: Technische Hochschule Ostwestfalen-Lippe status: public supervisor: - first_name: Alexander full_name: Kutter, Alexander id: '83513' last_name: Kutter - first_name: Colin full_name: Behrens, Colin id: '77083' last_name: Behrens title: Entwicklung und Evaluierung eines multisensorischen Kamera-Setups zur 3D-Raumrekonstruktion in einer dynamischen Industrieumgebung mittels Gaussian Splatting auf einem autonomen Robotersystem type: bachelor_thesis user_id: '83781' year: '2025' ... --- _id: '13349' abstract: - lang: eng text: In weakly-structured work processes, workers are free to decide in which sequence to process their tasks. Predicting their decision-making helps plan production more accurately while preserving workers’ autonomy. The factors that influence workers’ decision-making depend on the manufacturing process and person considered, and they must be newly collected for each use case. This paper identifies the factors influencing workers when deciding in which sequence to process manufacturing tasks in a medium-sized hydraulic cylinder manufacturer. Five workers and two lead workers were observed and interviewed during several work shifts about influencing factors. The authors propose a new interview technique called indifference testing to overcome subjects’ difficulty articulating their decision-making process. Collected factors were categorized using inductive category formation and context analysis. The analyses identified 75 influencing factors comprising 37 decision attributes and 38 decision rules. The identified decision attributes indicate that worker preferences are influenced by attributes from the classical scheduling literature and attributes related to worker well-being, circadian rhythms, and ergonomics. The identified decision rules are useful constituents of more complex preference functions. The decision attributes and rules enable the construction of machine learning models to predict workers’ task sequencing decisions in job shops. Potential applications include systematically eliminating or controlling influencing factors through workplace design measures to increase worker well-being and optimality of their decisions. author: - first_name: Jan-Phillip full_name: Herrmann, Jan-Phillip id: '86180' last_name: Herrmann - first_name: Sven full_name: Tackenberg, Sven id: '71470' last_name: Tackenberg - first_name: Florens full_name: Burgert, Florens last_name: Burgert - first_name: Verena full_name: Nitsch, Verena last_name: Nitsch citation: ama: Herrmann JP, Tackenberg S, Burgert F, Nitsch V. Influencing factors on worker task sequencing decisions in a medium-sized hydraulic cylinder manufacturer. Procedia Computer Science. 2025;253:1820-1829. doi:10.1016/j.procs.2025.01.244 apa: Herrmann, J.-P., Tackenberg, S., Burgert, F., & Nitsch, V. (2025). Influencing factors on worker task sequencing decisions in a medium-sized hydraulic cylinder manufacturer. Procedia Computer Science, 253, 1820–1829. https://doi.org/10.1016/j.procs.2025.01.244 bjps: Herrmann J-P et al. (2025) Influencing Factors on Worker Task Sequencing Decisions in a Medium-Sized Hydraulic Cylinder Manufacturer. Procedia Computer Science 253, 1820–1829. chicago: 'Herrmann, Jan-Phillip, Sven Tackenberg, Florens Burgert, and Verena Nitsch. “Influencing Factors on Worker Task Sequencing Decisions in a Medium-Sized Hydraulic Cylinder Manufacturer.” Procedia Computer Science 253 (2025): 1820–29. https://doi.org/10.1016/j.procs.2025.01.244.' chicago-de: 'Herrmann, Jan-Phillip, Sven Tackenberg, Florens Burgert und Verena Nitsch. 2025. Influencing factors on worker task sequencing decisions in a medium-sized hydraulic cylinder manufacturer. Procedia Computer Science 253: 1820–1829. doi:10.1016/j.procs.2025.01.244, .' din1505-2-1: 'Herrmann, Jan-Phillip ; Tackenberg, Sven ; Burgert, Florens ; Nitsch, Verena: Influencing factors on worker task sequencing decisions in a medium-sized hydraulic cylinder manufacturer. In: Procedia Computer Science Bd. 253. Amsterdam, Elsevier BV (2025), S. 1820–1829' havard: J.-P. Herrmann, S. Tackenberg, F. Burgert, V. Nitsch, Influencing factors on worker task sequencing decisions in a medium-sized hydraulic cylinder manufacturer, Procedia Computer Science. 253 (2025) 1820–1829. ieee: 'J.-P. Herrmann, S. Tackenberg, F. Burgert, and V. Nitsch, “Influencing factors on worker task sequencing decisions in a medium-sized hydraulic cylinder manufacturer,” Procedia Computer Science, vol. 253, pp. 1820–1829, 2025, doi: 10.1016/j.procs.2025.01.244.' mla: Herrmann, Jan-Phillip, et al. “Influencing Factors on Worker Task Sequencing Decisions in a Medium-Sized Hydraulic Cylinder Manufacturer.” Procedia Computer Science, vol. 253, 2025, pp. 1820–29, https://doi.org/10.1016/j.procs.2025.01.244. short: J.-P. Herrmann, S. Tackenberg, F. Burgert, V. Nitsch, Procedia Computer Science 253 (2025) 1820–1829. ufg: 'Herrmann, Jan-Phillip u. a.: Influencing factors on worker task sequencing decisions in a medium-sized hydraulic cylinder manufacturer, in: Procedia Computer Science 253 (2025),  S. 1820–1829.' van: Herrmann JP, Tackenberg S, Burgert F, Nitsch V. Influencing factors on worker task sequencing decisions in a medium-sized hydraulic cylinder manufacturer. Procedia Computer Science. 2025;253:1820–9. date_created: 2026-01-29T10:15:17Z date_updated: 2026-02-10T10:54:05Z department: - _id: DEP7020 doi: 10.1016/j.procs.2025.01.244 intvolume: ' 253' keyword: - Task Sequencing - Manufacturing - Learning To Rank - Scheduling Human Factors - Case Study language: - iso: eng page: 1820-1829 place: Amsterdam publication: Procedia Computer Science publication_identifier: issn: - 1877-0509 publication_status: published publisher: Elsevier BV quality_controlled: '1' status: public title: Influencing factors on worker task sequencing decisions in a medium-sized hydraulic cylinder manufacturer type: scientific_journal_article user_id: '83781' volume: 253 year: '2025' ... --- _id: '13350' abstract: - lang: ger text: In einer humanzentrierten Kleinserien- und Einzelfertigung mit Werkstattorganisation verfügen Fertigungsmitarbeitende häufig über eine hohe Autonomie und Entscheidungsfreiheit. Das Zusammenspiel individueller Planungsstrategien von Mitarbeitenden innerhalb eines Fertigungsprozesses kann sich positiv als auch negativ auf das Erreichen der produktionslogistischen Zielgrößen auswirken. In diesem Beitrag wird eine Variante des Flexible Job Shop Scheduling Problems vorgestellt, welches das Entscheidungsverhalten autonomer Arbeitspersonen bezüglich der Bearbeitungsreihenfolgebildung berücksichtigt. Weiterhin wird die Ableitung arbeitsorganisatorischer Gestaltungsempfehlungen durch die Analyse individueller Planungsstrategien von Arbeitspersonen mittels Methoden der erklärbaren künstlichen Intelligenz demonstriert. Betrachtungsgegenstand der Analyse ist die Entscheidung von Arbeitspersonen, in welcher Reihenfolge sie ihre täglichen Aufgaben abarbeiten. Der Beitrag schließt mit einer Diskussion über die Nutzung der vorgestellten Verfahren zur Ableitung von arbeitsorganisatorischen Gestaltungsempfehlungen. author: - first_name: Jan-Phillip full_name: Herrmann, Jan-Phillip id: '75846' last_name: Herrmann - first_name: Sven full_name: Tackenberg, Sven id: '71470' last_name: Tackenberg - first_name: Verena full_name: Nitsch, Verena last_name: Nitsch citation: ama: Herrmann JP, Tackenberg S, Nitsch V. Analyse Der Entscheidungsfindung von Fertigungsmitarbeitenden Durch Erklärbare Künstliche Intelligenz Zur Ableitung Arbeitsorganisatorischer Gestaltungsempfehlungen. (Gesellschaft für Arbeitswissenschaft e.V. Sankt Augustin, ed.). GfA-Press; 2025:415-420. doi:10.61063/FK2025 apa: 'Herrmann, J.-P., Tackenberg, S., & Nitsch, V. (2025). Analyse der Entscheidungsfindung von Fertigungsmitarbeitenden durch erklärbare künstliche Intelligenz zur Ableitung arbeitsorganisatorischer Gestaltungsempfehlungen. In Gesellschaft für Arbeitswissenschaft e.V. Sankt Augustin (Ed.), Arbeit 5.0: Menschzentrierte Innovationen für die Zukunft der Arbeit (pp. 415–420). GfA-Press. https://doi.org/10.61063/FK2025' bjps: 'Herrmann J-P, Tackenberg S and Nitsch V (2025) Analyse Der Entscheidungsfindung von Fertigungsmitarbeitenden Durch Erklärbare Künstliche Intelligenz Zur Ableitung Arbeitsorganisatorischer Gestaltungsempfehlungen, Gesellschaft für Arbeitswissenschaft e.V. Sankt Augustin (ed.). Sankt Augustin: GfA-Press.' chicago: 'Herrmann, Jan-Phillip, Sven Tackenberg, and Verena Nitsch. Analyse Der Entscheidungsfindung von Fertigungsmitarbeitenden Durch Erklärbare Künstliche Intelligenz Zur Ableitung Arbeitsorganisatorischer Gestaltungsempfehlungen. Edited by Gesellschaft für Arbeitswissenschaft e.V. Sankt Augustin. Arbeit 5.0: Menschzentrierte Innovationen Für Die Zukunft Der Arbeit. Sankt Augustin: GfA-Press, 2025. https://doi.org/10.61063/FK2025.' chicago-de: 'Herrmann, Jan-Phillip, Sven Tackenberg und Verena Nitsch. 2025. Analyse der Entscheidungsfindung von Fertigungsmitarbeitenden durch erklärbare künstliche Intelligenz zur Ableitung arbeitsorganisatorischer Gestaltungsempfehlungen. Hg. von Gesellschaft für Arbeitswissenschaft e.V. Sankt Augustin. Arbeit 5.0: Menschzentrierte Innovationen für die Zukunft der Arbeit. Sankt Augustin: GfA-Press. doi:10.61063/FK2025, .' din1505-2-1: 'Herrmann, Jan-Phillip ; Tackenberg, Sven ; Nitsch, Verena ; Gesellschaft für Arbeitswissenschaft e.V. Sankt Augustin (Hrsg.): Analyse der Entscheidungsfindung von Fertigungsmitarbeitenden durch erklärbare künstliche Intelligenz zur Ableitung arbeitsorganisatorischer Gestaltungsempfehlungen. Sankt Augustin : GfA-Press, 2025' havard: J.-P. Herrmann, S. Tackenberg, V. Nitsch, Analyse der Entscheidungsfindung von Fertigungsmitarbeitenden durch erklärbare künstliche Intelligenz zur Ableitung arbeitsorganisatorischer Gestaltungsempfehlungen, GfA-Press, Sankt Augustin, 2025. ieee: 'J.-P. Herrmann, S. Tackenberg, and V. Nitsch, Analyse der Entscheidungsfindung von Fertigungsmitarbeitenden durch erklärbare künstliche Intelligenz zur Ableitung arbeitsorganisatorischer Gestaltungsempfehlungen. Sankt Augustin: GfA-Press, 2025, pp. 415–420. doi: 10.61063/FK2025.' mla: 'Herrmann, Jan-Phillip, et al. “Analyse Der Entscheidungsfindung von Fertigungsmitarbeitenden Durch Erklärbare Künstliche Intelligenz Zur Ableitung Arbeitsorganisatorischer Gestaltungsempfehlungen.” Arbeit 5.0: Menschzentrierte Innovationen Für Die Zukunft Der Arbeit, edited by Gesellschaft für Arbeitswissenschaft e.V. Sankt Augustin, GfA-Press, 2025, pp. 415–20, https://doi.org/10.61063/FK2025.' short: J.-P. Herrmann, S. Tackenberg, V. Nitsch, Analyse Der Entscheidungsfindung von Fertigungsmitarbeitenden Durch Erklärbare Künstliche Intelligenz Zur Ableitung Arbeitsorganisatorischer Gestaltungsempfehlungen, GfA-Press, Sankt Augustin, 2025. ufg: 'Herrmann, Jan-Phillip/Tackenberg, Sven/Nitsch, Verena: Analyse der Entscheidungsfindung von Fertigungsmitarbeitenden durch erklärbare künstliche Intelligenz zur Ableitung arbeitsorganisatorischer Gestaltungsempfehlungen, hg. von Gesellschaft für Arbeitswissenschaft e.V. Sankt Augustin, Sankt Augustin 2025.' van: 'Herrmann JP, Tackenberg S, Nitsch V. Analyse der Entscheidungsfindung von Fertigungsmitarbeitenden durch erklärbare künstliche Intelligenz zur Ableitung arbeitsorganisatorischer Gestaltungsempfehlungen. Gesellschaft für Arbeitswissenschaft e.V. Sankt Augustin, editor. Arbeit 5.0: Menschzentrierte Innovationen für die Zukunft der Arbeit. Sankt Augustin: GfA-Press; 2025.' conference: end_date: 2025-03-27 location: Aachen name: 71. Kongress der Gesellschaft für Arbeitswissenschaft e.V. start_date: 2025-03-25 corporate_editor: - Gesellschaft für Arbeitswissenschaft e.V. Sankt Augustin date_created: 2026-01-29T10:20:46Z date_updated: 2026-02-10T12:24:29Z department: - _id: DEP7020 doi: 10.61063/FK2025 keyword: - Flexible Job Shop Scheduling - Learning To Rank - Erklärbare Künstliche Intelligenz - Planungsautonomie - Simulation language: - iso: eng main_file_link: - open_access: '1' url: https://www.gesellschaft-fuer-arbeitswissenschaft.de/publikationen_gfa-press-tagungsband.htm oa: '1' page: 415-420 place: Sankt Augustin publication: 'Arbeit 5.0: Menschzentrierte Innovationen für die Zukunft der Arbeit' publication_identifier: eisbn: - 978-3-936804-36-2 publication_status: published publisher: GfA-Press status: public title: Analyse der Entscheidungsfindung von Fertigungsmitarbeitenden durch erklärbare künstliche Intelligenz zur Ableitung arbeitsorganisatorischer Gestaltungsempfehlungen type: conference_editor_article user_id: '83781' year: '2025' ... --- _id: '13651' abstract: - lang: eng text: "Microbial food safety is the master key for reducing illness caused by the consumption of foodstuffs. This demonstration therefore aims to use non-pathogenic surrogates to draw conclusions whether vegan ready-to-eat model food serves as a base for growth of pathogenic Escherichia coli and Listeria monocytogenes in vegan ready-to-eat meat substitute in case of a potential contamination, causing a reduction of food safety.\r\nPackages of ready-to-eat vegan meat substitutes were inoculated with certain level of non-pathogenic L. innocua and E. coli and incubated at varying environmental conditions before they were examined for changes in the physico-chemical properties.\r\nThe observed ability of the microbes to grow in the snacks may cause a reduction in food safety. This demonstration shows that these ready-to-eat-snacks may cause a reduction in food safety if the product studied is contaminated." article_number: '1' article_type: original author: - first_name: Carolin full_name: Müller, Carolin id: '67085' last_name: Müller - first_name: Jarmo full_name: Alarinta, Jarmo last_name: Alarinta - first_name: Björn full_name: Frahm, Björn id: '45666' last_name: Frahm - first_name: Gun full_name: Wirtanen, Gun last_name: Wirtanen citation: ama: Müller C, Alarinta J, Frahm B, Wirtanen G. Demonstration of Listeria innocua and Escherichia coli growth in ready-to-eat vegan foods. SeAMK Journal. 2025;2(1). apa: Müller, C., Alarinta, J., Frahm, B., & Wirtanen, G. (2025). Demonstration of Listeria innocua and Escherichia coli growth in ready-to-eat vegan foods. SeAMK Journal, 2(1), Article 1. bjps: Müller C et al. (2025) Demonstration of Listeria Innocua and Escherichia Coli Growth in Ready-to-Eat Vegan Foods. SeAMK Journal 2. chicago: Müller, Carolin, Jarmo Alarinta, Björn Frahm, and Gun Wirtanen. “Demonstration of Listeria Innocua and Escherichia Coli Growth in Ready-to-Eat Vegan Foods.” SeAMK Journal 2, no. 1 (2025). chicago-de: Müller, Carolin, Jarmo Alarinta, Björn Frahm und Gun Wirtanen. 2025. Demonstration of Listeria innocua and Escherichia coli growth in ready-to-eat vegan foods. SeAMK Journal 2, Nr. 1. din1505-2-1: 'Müller, Carolin ; Alarinta, Jarmo ; Frahm, Björn ; Wirtanen, Gun: Demonstration of Listeria innocua and Escherichia coli growth in ready-to-eat vegan foods. In: SeAMK Journal Bd. 2. SEINÄJOKI, SeAMK (2025), Nr. 1' havard: C. Müller, J. Alarinta, B. Frahm, G. Wirtanen, Demonstration of Listeria innocua and Escherichia coli growth in ready-to-eat vegan foods, SeAMK Journal. 2 (2025). ieee: C. Müller, J. Alarinta, B. Frahm, and G. Wirtanen, “Demonstration of Listeria innocua and Escherichia coli growth in ready-to-eat vegan foods,” SeAMK Journal, vol. 2, no. 1, Art. no. 1, 2025. mla: Müller, Carolin, et al. “Demonstration of Listeria Innocua and Escherichia Coli Growth in Ready-to-Eat Vegan Foods.” SeAMK Journal, vol. 2, no. 1, 1, 2025. short: C. Müller, J. Alarinta, B. Frahm, G. Wirtanen, SeAMK Journal 2 (2025). ufg: 'Müller, Carolin u. a.: Demonstration of Listeria innocua and Escherichia coli growth in ready-to-eat vegan foods, in: SeAMK Journal 2 (2025), H. 1.' van: Müller C, Alarinta J, Frahm B, Wirtanen G. Demonstration of Listeria innocua and Escherichia coli growth in ready-to-eat vegan foods. SeAMK Journal. 2025;2(1). date_created: 2026-03-27T17:29:35Z date_updated: 2026-04-08T13:41:35Z department: - _id: DEP4000 intvolume: ' 2' issue: '1' keyword: - Vegan food - Ready-to-eat food - RTE - Listeria innocua - Escherichia coli - food safety - microbial spoilage - shelf life study language: - iso: eng main_file_link: - open_access: '1' url: https://urn.fi/URN:NBN:fi-fe2025040223221 oa: '1' place: SEINÄJOKI publication: SeAMK Journal publication_identifier: issn: - 2984-1917 publication_status: published publisher: SeAMK quality_controlled: '1' related_material: link: - relation: confirmation url: https://lehti.seamk.fi/journal/demonstration-of-listeria-innocua-and-escherichia-coli-growth-in-ready-to-eat-vegan-foods/ status: public title: Demonstration of Listeria innocua and Escherichia coli growth in ready-to-eat vegan foods type: scientific_journal_article user_id: '83781' volume: 2 year: '2025' ... --- _id: '12212' abstract: - lang: eng text: Water quality and hypoxia in lakes and reservoirs are strongly associated with water renewal. Yet vertical water exchange is still not fully understood and challenging to evaluate in highly dynamic systems. Here, we applied a scaling approach using the vertical timescale, vertical water age (VWA), defined as time since a water parcel last touched the water surface. We established a 3D hydrodynamic-based age model to quantify the vertical water renewal in Xiangxi Bay, a tributary bay of the Three Gorges Dam. The integrated effects of hydrodynamic processes like stratification, intruding density currents from the mainstream, and upstream inflow on the vertical renewal were accounted for. Results indicated that the spatial–temporal distribution of VWA in Xiangxi Bay depended on stratification and forms of intruding density currents. Age was large in spring and summer, and small in autumn and winter, reaching a maximum of 25 days in April. The vertical water renewal was faster during bottom intrusions from the mainstream than during middle and surface intrusions. At times, the epilimnion contained old water due to circulations, and the hypolimnion contained young water due to upstream flushing. In contrast to natural lakes, the bottom water was often younger than overlying intermediate waters. This demonstrated that mixed layer depth was insufficient to fully capture the vertical exchange in riverine systems with significant surface/bottom intrusion. The findings suggested VWA as a quantitative measure of vertical water transport in highly dynamic systems and its usability for environmental water management. article_number: '130701' author: - first_name: Bo full_name: Gai, Bo last_name: Gai - first_name: Bertram full_name: Boehrer, Bertram last_name: Boehrer - first_name: Jian full_name: Sun, Jian last_name: Sun - first_name: Yuanyi full_name: Li, Yuanyi last_name: Li - first_name: Binliang full_name: Lin, Binliang last_name: Lin - first_name: Tom full_name: Shatwell, Tom id: '86424' last_name: Shatwell orcid: 0000-0002-4520-7916 citation: ama: Gai B, Boehrer B, Sun J, Li Y, Lin B, Shatwell T. Vertical water age and water renewal in a large riverine reservoir. Journal of Hydrology. 2024;631(3). doi:10.1016/j.jhydrol.2024.130701 apa: Gai, B., Boehrer, B., Sun, J., Li, Y., Lin, B., & Shatwell, T. (2024). Vertical water age and water renewal in a large riverine reservoir. Journal of Hydrology, 631(3), Article 130701. https://doi.org/10.1016/j.jhydrol.2024.130701 bjps: Gai B et al. (2024) Vertical Water Age and Water Renewal in a Large Riverine Reservoir. Journal of Hydrology 631. chicago: Gai, Bo, Bertram Boehrer, Jian Sun, Yuanyi Li, Binliang Lin, and Tom Shatwell. “Vertical Water Age and Water Renewal in a Large Riverine Reservoir.” Journal of Hydrology 631, no. 3 (2024). https://doi.org/10.1016/j.jhydrol.2024.130701. chicago-de: Gai, Bo, Bertram Boehrer, Jian Sun, Yuanyi Li, Binliang Lin und Tom Shatwell. 2024. Vertical water age and water renewal in a large riverine reservoir. Journal of Hydrology 631, Nr. 3. doi:10.1016/j.jhydrol.2024.130701, . din1505-2-1: 'Gai, Bo ; Boehrer, Bertram ; Sun, Jian ; Li, Yuanyi ; Lin, Binliang ; Shatwell, Tom: Vertical water age and water renewal in a large riverine reservoir. In: Journal of Hydrology Bd. 631. Amsterdam, Elsevier BV (2024), Nr. 3' havard: B. Gai, B. Boehrer, J. Sun, Y. Li, B. Lin, T. Shatwell, Vertical water age and water renewal in a large riverine reservoir, Journal of Hydrology. 631 (2024). ieee: 'B. Gai, B. Boehrer, J. Sun, Y. Li, B. Lin, and T. Shatwell, “Vertical water age and water renewal in a large riverine reservoir,” Journal of Hydrology, vol. 631, no. 3, Art. no. 130701, 2024, doi: 10.1016/j.jhydrol.2024.130701.' mla: Gai, Bo, et al. “Vertical Water Age and Water Renewal in a Large Riverine Reservoir.” Journal of Hydrology, vol. 631, no. 3, 130701, 2024, https://doi.org/10.1016/j.jhydrol.2024.130701. short: B. Gai, B. Boehrer, J. Sun, Y. Li, B. Lin, T. Shatwell, Journal of Hydrology 631 (2024). ufg: 'Gai, Bo u. a.: Vertical water age and water renewal in a large riverine reservoir, in: Journal of Hydrology 631 (2024), H. 3.' van: Gai B, Boehrer B, Sun J, Li Y, Lin B, Shatwell T. Vertical water age and water renewal in a large riverine reservoir. Journal of Hydrology. 2024;631(3). date_created: 2024-12-08T19:37:43Z date_updated: 2024-12-11T14:03:33Z department: - _id: DEP8022 doi: 10.1016/j.jhydrol.2024.130701 extern: '1' intvolume: ' 631' issue: '3' keyword: - Vertical water renewal - Water age - Thermal stratification - Hypoxia - 3D hydrodynamic-based age model - Water environmental management language: - iso: eng place: Amsterdam publication: Journal of Hydrology publication_identifier: eissn: - 1879-2707 issn: - 0022-1694 publication_status: published publisher: Elsevier BV quality_controlled: '1' status: public title: Vertical water age and water renewal in a large riverine reservoir type: scientific_journal_article user_id: '83781' volume: 631 year: '2024' ... --- _id: '12816' abstract: - lang: eng text: Medical images need annotations with high-level semantic descriptors, so that domain experts can search for the desired dataset among an enormous volume of visual media within a Medical Data Integration Center. This article introduces a processing pipeline for storing and annotating DICOM and PNG imaging data by applying Elasticsearch, S3 and Deep Learning technologies. The proposed method processes both DICOM and PNG images to generate annotations. These image annotations are indexed in Elasticsearch with the corresponding raw data paths, where they can be retrieved and analyzed. author: - first_name: Ka Yung full_name: Cheng, Ka Yung last_name: Cheng - first_name: Santiago full_name: Pazmino, Santiago last_name: Pazmino - first_name: Bjoern full_name: Bergh, Bjoern last_name: Bergh - first_name: Markus full_name: Lange-Hegermann, Markus id: '71761' last_name: Lange-Hegermann - first_name: Bjorn full_name: Schreiweis, Bjorn last_name: Schreiweis citation: ama: Cheng KY, Pazmino S, Bergh B, Lange-Hegermann M, Schreiweis B. An Image Retrieval Pipeline in a Medical Data Integration Center. Vol 310. IOS Press, Incorporated; 2024:1388-1389. doi:10.3233/SHTI231208 apa: Cheng, K. Y., Pazmino, S., Bergh, B., Lange-Hegermann, M., & Schreiweis, B. (2024). An Image Retrieval Pipeline in a Medical Data Integration Center. In 19th World Congress on Medical and Health Informatics (MEDINFO) (Vol. 310, pp. 1388–1389). IOS Press, Incorporated. https://doi.org/10.3233/SHTI231208 bjps: Cheng KY et al. (2024) An Image Retrieval Pipeline in a Medical Data Integration Center. IOS Press, Incorporated. chicago: Cheng, Ka Yung, Santiago Pazmino, Bjoern Bergh, Markus Lange-Hegermann, and Bjorn Schreiweis. An Image Retrieval Pipeline in a Medical Data Integration Center. 19th World Congress on Medical and Health Informatics (MEDINFO). Vol. 310. Studies in Health Technology and Informatics. IOS Press, Incorporated, 2024. https://doi.org/10.3233/SHTI231208. chicago-de: Cheng, Ka Yung, Santiago Pazmino, Bjoern Bergh, Markus Lange-Hegermann und Bjorn Schreiweis. 2024. An Image Retrieval Pipeline in a Medical Data Integration Center. 19th World Congress on Medical and Health Informatics (MEDINFO). Bd. 310. Studies in Health Technology and Informatics. IOS Press, Incorporated. doi:10.3233/SHTI231208, . din1505-2-1: 'Cheng, Ka Yung ; Pazmino, Santiago ; Bergh, Bjoern ; Lange-Hegermann, Markus ; Schreiweis, Bjorn: An Image Retrieval Pipeline in a Medical Data Integration Center., Studies in Health Technology and Informatics. Bd. 310 : IOS Press, Incorporated, 2024' havard: K.Y. Cheng, S. Pazmino, B. Bergh, M. Lange-Hegermann, B. Schreiweis, An Image Retrieval Pipeline in a Medical Data Integration Center., IOS Press, Incorporated, 2024. ieee: 'K. Y. Cheng, S. Pazmino, B. Bergh, M. Lange-Hegermann, and B. Schreiweis, An Image Retrieval Pipeline in a Medical Data Integration Center., vol. 310. IOS Press, Incorporated, 2024, pp. 1388–1389. doi: 10.3233/SHTI231208.' mla: Cheng, Ka Yung, et al. “An Image Retrieval Pipeline in a Medical Data Integration Center.” 19th World Congress on Medical and Health Informatics (MEDINFO), vol. 310, IOS Press, Incorporated, 2024, pp. 1388–89, https://doi.org/10.3233/SHTI231208. short: K.Y. Cheng, S. Pazmino, B. Bergh, M. Lange-Hegermann, B. Schreiweis, An Image Retrieval Pipeline in a Medical Data Integration Center., IOS Press, Incorporated, 2024. ufg: 'Cheng, Ka Yung u. a.: An Image Retrieval Pipeline in a Medical Data Integration Center., Bd. 310, o. O. 2024 (Studies in Health Technology and Informatics).' van: Cheng KY, Pazmino S, Bergh B, Lange-Hegermann M, Schreiweis B. An Image Retrieval Pipeline in a Medical Data Integration Center. 19th World Congress on Medical and Health Informatics (MEDINFO). IOS Press, Incorporated; 2024. (Studies in Health Technology and Informatics; vol. 310). conference: end_date: 2023-08-12 location: Sydney, AUSTRALIA name: 19th World Congress on Medical and Health Informatics (MEDINFO) start_date: 2023-08-08 date_created: 2025-04-17T08:25:27Z date_updated: 2025-06-25T13:05:17Z department: - _id: DEP5023 doi: 10.3233/SHTI231208 external_id: pmid: - '38269660' intvolume: ' 310' keyword: - Medical image retrieval - data lake - DICOM - deep learning - elasticsearch language: - iso: eng page: 1388-1389 pmid: '1' publication: 19th World Congress on Medical and Health Informatics (MEDINFO) publication_identifier: eisbn: - 978-1-64368-457-4 eissn: - 1879-8365 isbn: - 978-1-64368-456-7 issn: - 0926-9630 publication_status: published publisher: IOS Press, Incorporated series_title: Studies in Health Technology and Informatics status: public title: An Image Retrieval Pipeline in a Medical Data Integration Center. type: conference_speech user_id: '83781' volume: 310 year: '2024' ... --- _id: '12822' abstract: - lang: eng text: A medical data integration center integrates a large volume of medical images from clinical departments, including X-rays, CT scans, and MRI scans. Ideally, all images should be indexed appropriately with standard clinical terms. However, some images have incorrect or missing annotations, which creates challenges in searching and integrating data centrally. To address this issue, accurate and meaningful descriptors are needed for indexing fields, enabling users to efficiently search for desired images and integrate them with international standards. This paper aims to provide concise annotation for missing or incorrectly indexed fields, incorporating essential instance -level information such as radiology modalities (e.g., X-rays), anatomical regions (e.g., chest), and body orientations (e.g., lateral) using a Deep Learning classification model - ResNet50. To demonstrate the capabilities of our algorithm in generating annotations for indexing fields, we conducted three experiments using two opensource datasets, the ROCO dataset, and the IRMA dataset, along with a custom dataset featuring SNOMED CT labels. While the outcomes of these experiments are satisfactory (Precision of >75%) for less critical tasks and serve as a valuable testing ground for image retrieval, they also underscore the need for further exploration of potential challenges. This essay elaborates on the identified issues and presents well-founded recommendations for refining and advancing our proposed approach. author: - first_name: Ka Yung full_name: Cheng, Ka Yung last_name: Cheng - first_name: Markus full_name: Lange-Hegermann, Markus id: '71761' last_name: Lange-Hegermann - first_name: Jan-Bernd full_name: Hövener, Jan-Bernd last_name: Hövener - first_name: Björn full_name: Schreiweis, Björn last_name: Schreiweis citation: ama: Cheng KY, Lange-Hegermann M, Hövener JB, Schreiweis B. Instance-level medical image classification for text-based retrieval in a medical data integration center. Computational and Structural Biotechnology Journal. 2024;24:434-450. doi:10.1016/j.csbj.2024.06.006 apa: Cheng, K. Y., Lange-Hegermann, M., Hövener, J.-B., & Schreiweis, B. (2024). Instance-level medical image classification for text-based retrieval in a medical data integration center. Computational and Structural Biotechnology Journal, 24, 434–450. https://doi.org/10.1016/j.csbj.2024.06.006 bjps: Cheng KY et al. (2024) Instance-Level Medical Image Classification for Text-Based Retrieval in a Medical Data Integration Center. Computational and Structural Biotechnology Journal 24, 434–450. chicago: 'Cheng, Ka Yung, Markus Lange-Hegermann, Jan-Bernd Hövener, and Björn Schreiweis. “Instance-Level Medical Image Classification for Text-Based Retrieval in a Medical Data Integration Center.” Computational and Structural Biotechnology Journal 24 (2024): 434–50. https://doi.org/10.1016/j.csbj.2024.06.006.' chicago-de: 'Cheng, Ka Yung, Markus Lange-Hegermann, Jan-Bernd Hövener und Björn Schreiweis. 2024. Instance-level medical image classification for text-based retrieval in a medical data integration center. Computational and Structural Biotechnology Journal 24: 434–450. doi:10.1016/j.csbj.2024.06.006, .' din1505-2-1: 'Cheng, Ka Yung ; Lange-Hegermann, Markus ; Hövener, Jan-Bernd ; Schreiweis, Björn: Instance-level medical image classification for text-based retrieval in a medical data integration center. In: Computational and Structural Biotechnology Journal Bd. 24. Amsterdam [u.a.], Elsevier BV (2024), S. 434–450' havard: K.Y. Cheng, M. Lange-Hegermann, J.-B. Hövener, B. Schreiweis, Instance-level medical image classification for text-based retrieval in a medical data integration center, Computational and Structural Biotechnology Journal. 24 (2024) 434–450. ieee: 'K. Y. Cheng, M. Lange-Hegermann, J.-B. Hövener, and B. Schreiweis, “Instance-level medical image classification for text-based retrieval in a medical data integration center,” Computational and Structural Biotechnology Journal, vol. 24, pp. 434–450, 2024, doi: 10.1016/j.csbj.2024.06.006.' mla: Cheng, Ka Yung, et al. “Instance-Level Medical Image Classification for Text-Based Retrieval in a Medical Data Integration Center.” Computational and Structural Biotechnology Journal, vol. 24, 2024, pp. 434–50, https://doi.org/10.1016/j.csbj.2024.06.006. short: K.Y. Cheng, M. Lange-Hegermann, J.-B. Hövener, B. Schreiweis, Computational and Structural Biotechnology Journal 24 (2024) 434–450. ufg: 'Cheng, Ka Yung u. a.: Instance-level medical image classification for text-based retrieval in a medical data integration center, in: Computational and Structural Biotechnology Journal 24 (2024),  S. 434–450.' van: Cheng KY, Lange-Hegermann M, Hövener JB, Schreiweis B. Instance-level medical image classification for text-based retrieval in a medical data integration center. Computational and Structural Biotechnology Journal. 2024;24:434–50. date_created: 2025-04-22T13:32:38Z date_updated: 2025-06-26T08:58:59Z department: - _id: DEP5023 doi: 10.1016/j.csbj.2024.06.006 external_id: isi: - '001257361300001' pmid: - '38975287' intvolume: ' 24' isi: '1' keyword: - DICOM images - Medical image captioning - Medical image interchange - SNOMED CT body structure language: - iso: eng page: 434-450 place: Amsterdam [u.a.] pmid: '1' publication: Computational and Structural Biotechnology Journal publication_identifier: issn: - 2001-0370 publication_status: published publisher: Elsevier BV status: public title: Instance-level medical image classification for text-based retrieval in a medical data integration center type: scientific_journal_article user_id: '83781' volume: 24 year: '2024' ... --- _id: '10985' abstract: - lang: eng text: This thesis examines the impacts of scene and rendering optimizations techniques aimed for GPU rendering within the realm of animated scene for offline rendering. Focusing on the unique challenges posed by dynamic animations, the research explores how these rendering approaches impact rendering speed, memory efficiency, and the attainment of lifelike visual quality. Using Octane render as ground for analysis, this study aims to uncover how scene optimizations intersect with the demands of animated content. Through meticulous comparison, this thesis endeavours to provide insights that empower rendering practitioners and animators to go through optimization strategies, bridging the gap between efficient resource allocation and the pursuit of captivating visual. author: - first_name: Lucas full_name: De Melo Bernardino, Lucas id: '72490' last_name: De Melo Bernardino citation: ama: 'De Melo Bernardino L. Enhancing GPU Rendering Efficiency through Scene Optimizations: A Case Study Using Octane for Cinema 4D. Technischen Hochschule Ostwestfahlen-Lippe; 2024.' apa: 'De Melo Bernardino, L. (2024). Enhancing GPU Rendering Efficiency through Scene Optimizations: A Case Study using Octane for Cinema 4D. Technischen Hochschule Ostwestfahlen-Lippe.' bjps: 'De Melo Bernardino L (2024) Enhancing GPU Rendering Efficiency through Scene Optimizations: A Case Study Using Octane for Cinema 4D. Detmold: Technischen Hochschule Ostwestfahlen-Lippe.' chicago: 'De Melo Bernardino, Lucas. Enhancing GPU Rendering Efficiency through Scene Optimizations: A Case Study Using Octane for Cinema 4D. Detmold: Technischen Hochschule Ostwestfahlen-Lippe, 2024.' chicago-de: 'De Melo Bernardino, Lucas. 2024. Enhancing GPU Rendering Efficiency through Scene Optimizations: A Case Study using Octane for Cinema 4D. Detmold: Technischen Hochschule Ostwestfahlen-Lippe.' din1505-2-1: 'De Melo Bernardino, Lucas: Enhancing GPU Rendering Efficiency through Scene Optimizations: A Case Study using Octane for Cinema 4D. Detmold : Technischen Hochschule Ostwestfahlen-Lippe, 2024' havard: 'L. De Melo Bernardino, Enhancing GPU Rendering Efficiency through Scene Optimizations: A Case Study using Octane for Cinema 4D, Technischen Hochschule Ostwestfahlen-Lippe, Detmold, 2024.' ieee: 'L. De Melo Bernardino, Enhancing GPU Rendering Efficiency through Scene Optimizations: A Case Study using Octane for Cinema 4D. Detmold: Technischen Hochschule Ostwestfahlen-Lippe, 2024.' mla: 'De Melo Bernardino, Lucas. Enhancing GPU Rendering Efficiency through Scene Optimizations: A Case Study Using Octane for Cinema 4D. Technischen Hochschule Ostwestfahlen-Lippe, 2024.' short: 'L. De Melo Bernardino, Enhancing GPU Rendering Efficiency through Scene Optimizations: A Case Study Using Octane for Cinema 4D, Technischen Hochschule Ostwestfahlen-Lippe, Detmold, 2024.' ufg: 'De Melo Bernardino, Lucas: Enhancing GPU Rendering Efficiency through Scene Optimizations: A Case Study using Octane for Cinema 4D, Detmold 2024.' van: 'De Melo Bernardino L. Enhancing GPU Rendering Efficiency through Scene Optimizations: A Case Study using Octane for Cinema 4D. Detmold: Technischen Hochschule Ostwestfahlen-Lippe; 2024. 55 p.' date_created: 2024-02-01T07:25:50Z date_updated: 2024-02-01T12:56:04Z ddc: - '770' defense_date: 2024-01-29 department: - _id: DEP2001 file: - access_level: open_access content_type: application/pdf creator: adm-hemke date_created: 2024-02-01T12:50:55Z date_updated: 2024-02-01T12:50:55Z file_id: '10990' file_name: EnhancingGPU_RenderingEfficiencyThroughSceneOptimizations.pdf file_size: 54572345 relation: main_file success: 1 file_date_updated: 2024-02-01T12:50:55Z has_accepted_license: '1' keyword: - GPU Rendering - Scene Optimization - 3D Rendering - Cinema 4D - Octane Render language: - iso: eng oa: '1' page: '55' place: Detmold publication_status: published publisher: Technischen Hochschule Ostwestfahlen-Lippe status: public supervisor: - first_name: Rico full_name: Dober, Rico id: '76705' last_name: Dober - first_name: Jennifer full_name: Meier, Jennifer id: '85353' last_name: Meier title: 'Enhancing GPU Rendering Efficiency through Scene Optimizations: A Case Study using Octane for Cinema 4D' type: bachelor_thesis user_id: '83781' year: '2024' ... --- _id: '11113' abstract: - lang: eng text: 'When oil palm lumber is considered for load-bearing products such as glued laminated timber (GLT), defined strength and stiffness values are required. In this investigation, combined GLT from oil palm wood is tested in compression parallel and perpendicular and glulam lamellas in tension parallel to the vascular bundles. Strength and Young´s modulus in compression and tension parallel increase with the density by power law relationship. In contrast to dicotyle­dons, the strength in construction size exceeds that of small, defect-free test specimens (compression strength perpendicular), are in the same range (tensile and bending strength parallel) or only a little below (compression strength parallel). The specimen size does not influence the strength. The ratio of fc,0 : fm : ft,0 is 1.2 : 0.8 … 1.7 … 2.6 : 1 and fc,0 : fc,90 = 2.7 … 13.0 … 32.6 : 1 for ρ = 200 … 400 … 600 kg/m³; the ratio of Ec,0 : Em : Et,0 is 1.2 : 1.3 : 1 for ρ = 400 kg/m³. Ashby´s performance indices for minimum weight design rise with the density; the strength-density performance indices are comparable or only slightly lower than that for structural size softwood, whereas the modulus-density performance indices are much lower. The challenge in use of oil palm wood for load-bearing construction products is the low stiffness.' author: - first_name: Katja full_name: Frühwald-König, Katja id: '26232' last_name: Frühwald-König - first_name: Lena full_name: Heister, Lena id: '71887' last_name: Heister citation: ama: Frühwald-König K, Heister L. Compression properties of glued laminated timber and tensile properties of gluelam lamellas from oil palm wood. Wood material science and engineering. 2024;19(5):1101-1116. doi:10.1080/17480272.2024.2303627 apa: Frühwald-König, K., & Heister, L. (2024). Compression properties of glued laminated timber and tensile properties of gluelam lamellas from oil palm wood. Wood Material Science and Engineering, 19(5), 1101–1116. https://doi.org/10.1080/17480272.2024.2303627 bjps: Frühwald-König K and Heister L (2024) Compression Properties of Glued Laminated Timber and Tensile Properties of Gluelam Lamellas from Oil Palm Wood. Wood material science and engineering 19, 1101–1116. chicago: 'Frühwald-König, Katja, and Lena Heister. “Compression Properties of Glued Laminated Timber and Tensile Properties of Gluelam Lamellas from Oil Palm Wood.” Wood Material Science and Engineering 19, no. 5 (2024): 1101–16. https://doi.org/10.1080/17480272.2024.2303627.' chicago-de: 'Frühwald-König, Katja und Lena Heister. 2024. Compression properties of glued laminated timber and tensile properties of gluelam lamellas from oil palm wood. Wood material science and engineering 19, Nr. 5: 1101–1116. doi:10.1080/17480272.2024.2303627, .' din1505-2-1: 'Frühwald-König, Katja ; Heister, Lena: Compression properties of glued laminated timber and tensile properties of gluelam lamellas from oil palm wood. In: Wood material science and engineering Bd. 19. London, Taylor & Francis (2024), Nr. 5, S. 1101–1116' havard: K. Frühwald-König, L. Heister, Compression properties of glued laminated timber and tensile properties of gluelam lamellas from oil palm wood, Wood Material Science and Engineering. 19 (2024) 1101–1116. ieee: 'K. Frühwald-König and L. Heister, “Compression properties of glued laminated timber and tensile properties of gluelam lamellas from oil palm wood,” Wood material science and engineering, vol. 19, no. 5, pp. 1101–1116, 2024, doi: 10.1080/17480272.2024.2303627.' mla: Frühwald-König, Katja, and Lena Heister. “Compression Properties of Glued Laminated Timber and Tensile Properties of Gluelam Lamellas from Oil Palm Wood.” Wood Material Science and Engineering, vol. 19, no. 5, 2024, pp. 1101–16, https://doi.org/10.1080/17480272.2024.2303627. short: K. Frühwald-König, L. Heister, Wood Material Science and Engineering 19 (2024) 1101–1116. ufg: 'Frühwald-König, Katja/Heister, Lena: Compression properties of glued laminated timber and tensile properties of gluelam lamellas from oil palm wood, in: Wood material science and engineering 19 (2024), H. 5,  S. 1101–1116.' van: Frühwald-König K, Heister L. Compression properties of glued laminated timber and tensile properties of gluelam lamellas from oil palm wood. Wood material science and engineering. 2024;19(5):1101–16. date_created: 2024-02-25T07:30:24Z date_updated: 2025-06-25T12:41:40Z department: - _id: DEP7018 - _id: DEP1309 doi: 10.1080/17480272.2024.2303627 external_id: isi: - '001147069800001' intvolume: ' 19' isi: '1' issue: '5' keyword: - Oil palm wood - compression - tension - strength - young’s modulus - digital image correlation - glued laminated timber language: - iso: eng page: 1101-1116 place: London publication: Wood material science and engineering publication_identifier: eissn: - 1748-0280 issn: - 1748-0272 publication_status: published publisher: Taylor & Francis quality_controlled: '1' status: public title: Compression properties of glued laminated timber and tensile properties of gluelam lamellas from oil palm wood type: scientific_journal_article user_id: '83781' volume: 19 year: '2024' ... --- _id: '11997' abstract: - lang: eng text: "In Germany, individuals unable or not yet able to return to the general labor market due to disabilities are employed in sheltered workshops which are called WfbM (“Werkstätten für behinderte Menschen”). These organizations are required to earn the wages for the aforementioned group of people by offering market services. These services include, in particular, assembly activities. However, WfbM face the challenge that customer orders tend to become more complex, especially as a result of an increased number of product variants. This development not only has an impact on the work in WfbM, but also makes it much more difficult to achieve the desired inclusion of people with disabilities in the general labor market. Bearing this in mind, the research question addressed in this article can be stated as such: How far can the use of an informational assistance system compensate for performance deficits of people with disabilities in the context of assembly? The results of the conducted laboratory study show that the implementation of an assistance system can help to reduce existing barriers and challenges resulting from the mismatch between requirements of the general labor market and the performance characteristics of people with cognitive impairments.\r\nPractical Relevance: For people with disabilities, the use of assistance systems opens up new opportunities for participation in the general labor market and thus makes an important contribution to implementing the requirements of the “Bundesteilhabegesetz” (a law to strengthen participation of people with disabilities in Germany)." - lang: ger text: "In Deutschland werden Personen, die aufgrund von Beeinträchtigungen nicht bzw. noch nicht wieder auf dem allgemeinen Arbeitsmarkt tätig sein können, in einer „Werkstatt für behinderte Menschen (WfbM)“ beschäftigt. Diese Einrichtungen müssen die Arbeitsentgelte für den genannten Personenkreis durch am Markt angebotene Leistungen selbst erwirtschaften. Zu diesen Leistungen zählen vor allem Montagetätigkeiten. Allerdings stehen WfbM vor der Herausforderung, dass Kundenaufträge insbesondere infolge einer gestiegenen Variantenvielfalt tendenziell komplexer werden. Diese Entwicklung wirkt sich nicht nur auf die Arbeit in den Werkstätten aus, sondern hat auch zur Folge, dass die angestrebte Inklusion von Personen mit Unterstützungsbedarfen in den allgemeinen Arbeitsmarkt deutlich erschwert wird. Vor diesem Hintergrund wird in dem Beitrag der Forschungsfrage nachgegangen, inwieweit der Einsatz eines informatorischen Assistenzsystems Leistungsdefizite von Personen mit Unterstützungsbedarfen im Kontext der Montage ausgleichen kann. Die Ergebnisse der durchgeführten Laborstudie zeigen, dass die Einführung eines Assistenzsystems dazu beitragen kann, bestehende Barrieren, die sich aus der Inkongruenz zwischen den Anforderungen des allgemeinen Arbeitsmarktes und den Leistungsmerkmalen von Personen mit kognitiven Beeinträchtigungen ergeben, abzubauen.\r\n\r\nPraktische Relevanz: Der Einsatz von informatorischen Assistenzsystemen kann Personen mit Unterstützungsbedarfen eine Teilhabe am Arbeitsleben ermöglichen und leistet damit einen wichtigen Beitrag zur Umsetzung des Bundesteilhabegesetzes." article_type: review author: - first_name: Sven full_name: Bendzioch, Sven id: '71395' last_name: Bendzioch - first_name: Sven full_name: Hinrichsen, Sven id: '49010' last_name: Hinrichsen citation: ama: Bendzioch S, Hinrichsen S. Potentials of an informational assembly assistance system for persons with cognitive disabilities — Results of a laboratory study. Zeitschrift für Arbeitswissenschaft (ZfA). 2024;78(2):240-253. doi:10.1007/s41449-024-00414-9 apa: Bendzioch, S., & Hinrichsen, S. (2024). Potentials of an informational assembly assistance system for persons with cognitive disabilities — Results of a laboratory study. Zeitschrift Für Arbeitswissenschaft (ZfA), 78(2), 240–253. https://doi.org/10.1007/s41449-024-00414-9 bjps: Bendzioch S and Hinrichsen S (2024) Potentials of an Informational Assembly Assistance System for Persons with Cognitive Disabilities — Results of a Laboratory Study. Zeitschrift für Arbeitswissenschaft (ZfA) 78, 240–253. chicago: 'Bendzioch, Sven, and Sven Hinrichsen. “Potentials of an Informational Assembly Assistance System for Persons with Cognitive Disabilities — Results of a Laboratory Study.” Zeitschrift Für Arbeitswissenschaft (ZfA) 78, no. 2 (2024): 240–53. https://doi.org/10.1007/s41449-024-00414-9.' chicago-de: 'Bendzioch, Sven und Sven Hinrichsen. 2024. Potentials of an informational assembly assistance system for persons with cognitive disabilities — Results of a laboratory study. Zeitschrift für Arbeitswissenschaft (ZfA) 78, Nr. 2: 240–253. doi:10.1007/s41449-024-00414-9, .' din1505-2-1: 'Bendzioch, Sven ; Hinrichsen, Sven: Potentials of an informational assembly assistance system for persons with cognitive disabilities — Results of a laboratory study. In: Zeitschrift für Arbeitswissenschaft (ZfA) Bd. 78. Heidelberg, Springer-Verlag GmbH (2024), Nr. 2, S. 240–253' havard: S. Bendzioch, S. Hinrichsen, Potentials of an informational assembly assistance system for persons with cognitive disabilities — Results of a laboratory study, Zeitschrift Für Arbeitswissenschaft (ZfA). 78 (2024) 240–253. ieee: 'S. Bendzioch and S. Hinrichsen, “Potentials of an informational assembly assistance system for persons with cognitive disabilities — Results of a laboratory study,” Zeitschrift für Arbeitswissenschaft (ZfA), vol. 78, no. 2, pp. 240–253, 2024, doi: 10.1007/s41449-024-00414-9.' mla: Bendzioch, Sven, and Sven Hinrichsen. “Potentials of an Informational Assembly Assistance System for Persons with Cognitive Disabilities — Results of a Laboratory Study.” Zeitschrift Für Arbeitswissenschaft (ZfA), vol. 78, no. 2, 2024, pp. 240–53, https://doi.org/10.1007/s41449-024-00414-9. short: S. Bendzioch, S. Hinrichsen, Zeitschrift Für Arbeitswissenschaft (ZfA) 78 (2024) 240–253. ufg: 'Bendzioch, Sven/Hinrichsen, Sven: Potentials of an informational assembly assistance system for persons with cognitive disabilities — Results of a laboratory study, in: Zeitschrift für Arbeitswissenschaft (ZfA) 78 (2024), H. 2,  S. 240–253.' van: Bendzioch S, Hinrichsen S. Potentials of an informational assembly assistance system for persons with cognitive disabilities — Results of a laboratory study. Zeitschrift für Arbeitswissenschaft (ZfA). 2024;78(2):240–53. date_created: 2024-10-17T10:43:31Z date_updated: 2026-01-09T07:39:04Z department: - _id: DEP7020 - _id: DEP1305 doi: 10.1007/s41449-024-00414-9 intvolume: ' 78' issue: '2' keyword: - Informational Assistance System - People with Disabilities - Manual Assembly - Image Processing System - Laboratory Study language: - iso: eng page: 240-253 place: Heidelberg publication: Zeitschrift für Arbeitswissenschaft (ZfA) publication_identifier: eissn: - 2366-4681 issn: - 0340-2444 publication_status: published publisher: 'Springer-Verlag GmbH ' quality_controlled: '1' status: public title: Potentials of an informational assembly assistance system for persons with cognitive disabilities — Results of a laboratory study type: scientific_journal_article user_id: '49010' volume: 78 year: '2024' ... --- _id: '12022' author: - first_name: Mario full_name: Luttmann, Mario id: '68637' last_name: Luttmann - first_name: André full_name: Blome, André id: '62117' last_name: Blome - first_name: Jan full_name: Segermann, Jan id: '81965' last_name: Segermann - first_name: Mario full_name: Jekle, Mario last_name: Jekle - first_name: Björn full_name: Frahm, Björn id: '45666' last_name: Frahm - first_name: Ulrich full_name: Müller, Ulrich id: '12119' last_name: Müller citation: ama: Luttmann M, Blome A, Segermann J, Jekle M, Frahm B, Müller U. Erkenntnisse zur Nutzung von Photogrammmetrie für die Untersuchung des Bräunungsverhaltens von Weizenbrötchen.; 2024. apa: Luttmann, M., Blome, A., Segermann, J., Jekle, M., Frahm, B., & Müller, U. (2024). Erkenntnisse zur Nutzung von Photogrammmetrie für die Untersuchung des Bräunungsverhaltens von Weizenbrötchen. 10. GDL Kongress Lebensmitteltechnologie 2024, Lemgo. bjps: Luttmann M et al. (2024) Erkenntnisse zur Nutzung von Photogrammmetrie für die Untersuchung des Bräunungsverhaltens von Weizenbrötchen. . chicago: Luttmann, Mario, André Blome, Jan Segermann, Mario Jekle, Björn Frahm, and Ulrich Müller. Erkenntnisse zur Nutzung von Photogrammmetrie für die Untersuchung des Bräunungsverhaltens von Weizenbrötchen, 2024. chicago-de: Luttmann, Mario, André Blome, Jan Segermann, Mario Jekle, Björn Frahm und Ulrich Müller. 2024. Erkenntnisse zur Nutzung von Photogrammmetrie für die Untersuchung des Bräunungsverhaltens von Weizenbrötchen. din1505-2-1: 'Luttmann, Mario ; Blome, André ; Segermann, Jan ; Jekle, Mario ; Frahm, Björn ; Müller, Ulrich: Erkenntnisse zur Nutzung von Photogrammmetrie für die Untersuchung des Bräunungsverhaltens von Weizenbrötchen, 2024' havard: M. Luttmann, A. Blome, J. Segermann, M. Jekle, B. Frahm, U. Müller, Erkenntnisse zur Nutzung von Photogrammmetrie für die Untersuchung des Bräunungsverhaltens von Weizenbrötchen, 2024. ieee: M. Luttmann, A. Blome, J. Segermann, M. Jekle, B. Frahm, and U. Müller, Erkenntnisse zur Nutzung von Photogrammmetrie für die Untersuchung des Bräunungsverhaltens von Weizenbrötchen. 2024. mla: Luttmann, Mario, et al. Erkenntnisse zur Nutzung von Photogrammmetrie für die Untersuchung des Bräunungsverhaltens von Weizenbrötchen. 2024. short: M. Luttmann, A. Blome, J. Segermann, M. Jekle, B. Frahm, U. Müller, Erkenntnisse zur Nutzung von Photogrammmetrie für die Untersuchung des Bräunungsverhaltens von Weizenbrötchen, 2024. ufg: 'Luttmann, Mario u. a.: Erkenntnisse zur Nutzung von Photogrammmetrie für die Untersuchung des Bräunungsverhaltens von Weizenbrötchen, o. O. 2024.' van: Luttmann M, Blome A, Segermann J, Jekle M, Frahm B, Müller U. Erkenntnisse zur Nutzung von Photogrammmetrie für die Untersuchung des Bräunungsverhaltens von Weizenbrötchen. 2024. conference: end_date: 2024-10-12 location: Lemgo name: 10. GDL Kongress Lebensmitteltechnologie 2024 start_date: 2024-10-10 date_created: 2024-11-06T17:00:49Z date_updated: 2025-10-17T18:22:58Z department: - _id: DEP4000 - _id: DEP5023 - _id: DEP4028 - _id: DEP1308 keyword: - colorimetry - photogrammetry - wheat rolls - crust colour - 3D analysis language: - iso: ger publication_status: published status: public title: Erkenntnisse zur Nutzung von Photogrammmetrie für die Untersuchung des Bräunungsverhaltens von Weizenbrötchen type: conference_speech user_id: '81304' year: '2024' ... --- _id: '13576' abstract: - lang: eng text: "Background\r\nMany young women are dissatisfied with their bodies. This study investigated the effect on current body dissatisfaction levels of a newly developed evaluative conditioning procedure that paired self-similar and self-dissimilar images of bodies with positive and neutral affective images, respectively. We hypothesized that learning the contingency that self-similar bodies predict positive affectivity is one process that could aid in explaining how these procedures function.\r\nMethods\r\nAdult women without disordered eating pathology participated in an online experiment with random assignment to an intervention or a control condition. All participants initially rated body images in self-similarity and were subsequently asked to categorize positive and neutral images by valence as quickly and accurately as possible. In the intervention condition, self-similar bodies systematically preceded positive images, and self-dissimilar images preceded neutral images, creating a similar body → positive contingency. Pairings in the control condition were unsystematic such that no contingency was present. We measured categorization latencies and accuracies to infer contingency learning as well as current body dissatisfaction immediately before and after exposure to the pairings. All participants further completed measures of trait body image concerns and disordered eating psychopathology at baseline, which we examined as moderators of an expected relation between condition assignment, contingency learning, and body dissatisfaction improvements.\r\nResults\r\nWe analyzed data from N = 173 women fulfilling the inclusion criteria. Moderated mediation analyses showed that assignment to the intervention (vs. control) condition predicted increased similar body → positive contingency learning, which in turn predicted improved body dissatisfaction post-intervention, but only among women with higher pre-existing trait body image concerns or disordered eating levels.\r\nConclusions\r\nThe findings point toward the relevancy of further exploring the utility of pairing procedures. Similar body → positive contingency learning predicted improved body dissatisfaction in individuals with normatively high body image concerns, which suggests pairing procedures could help inform future research on reducing body dissatisfaction." article_number: '18' author: - first_name: Katharina full_name: Dumstorf, Katharina last_name: Dumstorf - first_name: Georg full_name: Halbeisen, Georg id: '85780' last_name: Halbeisen orcid: 0000-0002-9529-2215 - first_name: Georgios full_name: Paslakis, Georgios last_name: Paslakis citation: ama: 'Dumstorf K, Halbeisen G, Paslakis G. How evaluative pairings improve body dissatisfaction in adult women: evidence from a randomized-controlled online study. Journal of Eating Disorders. 2024;12(1). doi:10.1186/s40337-024-00975-4' apa: 'Dumstorf, K., Halbeisen, G., & Paslakis, G. (2024). How evaluative pairings improve body dissatisfaction in adult women: evidence from a randomized-controlled online study. Journal of Eating Disorders, 12(1), Article 18. https://doi.org/10.1186/s40337-024-00975-4' bjps: 'Dumstorf K, Halbeisen G and Paslakis G (2024) How Evaluative Pairings Improve Body Dissatisfaction in Adult Women: Evidence from a Randomized-Controlled Online Study. Journal of Eating Disorders 12.' chicago: 'Dumstorf, Katharina, Georg Halbeisen, and Georgios Paslakis. “How Evaluative Pairings Improve Body Dissatisfaction in Adult Women: Evidence from a Randomized-Controlled Online Study.” Journal of Eating Disorders 12, no. 1 (2024). https://doi.org/10.1186/s40337-024-00975-4.' chicago-de: 'Dumstorf, Katharina, Georg Halbeisen und Georgios Paslakis. 2024. How evaluative pairings improve body dissatisfaction in adult women: evidence from a randomized-controlled online study. Journal of Eating Disorders 12, Nr. 1. doi:10.1186/s40337-024-00975-4, .' din1505-2-1: 'Dumstorf, Katharina ; Halbeisen, Georg ; Paslakis, Georgios: How evaluative pairings improve body dissatisfaction in adult women: evidence from a randomized-controlled online study. In: Journal of Eating Disorders Bd. 12. London, BioMed Central (2024), Nr. 1' havard: 'K. Dumstorf, G. Halbeisen, G. Paslakis, How evaluative pairings improve body dissatisfaction in adult women: evidence from a randomized-controlled online study, Journal of Eating Disorders. 12 (2024).' ieee: 'K. Dumstorf, G. Halbeisen, and G. Paslakis, “How evaluative pairings improve body dissatisfaction in adult women: evidence from a randomized-controlled online study,” Journal of Eating Disorders, vol. 12, no. 1, Art. no. 18, 2024, doi: 10.1186/s40337-024-00975-4.' mla: 'Dumstorf, Katharina, et al. “How Evaluative Pairings Improve Body Dissatisfaction in Adult Women: Evidence from a Randomized-Controlled Online Study.” Journal of Eating Disorders, vol. 12, no. 1, 18, 2024, https://doi.org/10.1186/s40337-024-00975-4.' short: K. Dumstorf, G. Halbeisen, G. Paslakis, Journal of Eating Disorders 12 (2024). ufg: 'Dumstorf, Katharina/Halbeisen, Georg/Paslakis, Georgios: How evaluative pairings improve body dissatisfaction in adult women: evidence from a randomized-controlled online study, in: Journal of Eating Disorders 12 (2024), H. 1.' van: 'Dumstorf K, Halbeisen G, Paslakis G. How evaluative pairings improve body dissatisfaction in adult women: evidence from a randomized-controlled online study. Journal of Eating Disorders. 2024;12(1).' date_created: 2026-03-25T13:36:06Z date_updated: 2026-03-27T08:34:20Z department: - _id: DEP1500 doi: 10.1186/s40337-024-00975-4 external_id: isi: - '001148311200002' pmid: - '38268007' intvolume: ' 12' isi: '1' issue: '1' keyword: - Evaluative conditioning - Body image - Eating disorders - Contingency learning - Psychotherapy - Pairing procedures language: - iso: eng place: London pmid: '1' publication: Journal of Eating Disorders publication_identifier: eissn: - 2050-2974 publication_status: published publisher: BioMed Central quality_controlled: '1' status: public title: 'How evaluative pairings improve body dissatisfaction in adult women: evidence from a randomized-controlled online study' type: scientific_journal_article user_id: '83781' volume: 12 year: '2024' ... --- _id: '13616' abstract: - lang: eng text: "Objective\r\nBody dissatisfaction is an important risk factor for developing eating disorders. This study investigated whether pairing images of normatively “healthy” weight bodies of women with positive stimuli, and images of bodies outside the healthy range (e.g., underweight) with neutral stimuli, could improve body dissatisfaction.\r\nMethods\r\nWe compared behavioral and rating data from 121 adult women who participated in an online study and were randomly assigned to an intervention condition (in which healthy body mass predicted positive stimuli) or a control condition (with no contingency between body mass and stimulus valence).\r\nResults\r\nBehavioral data showed that women in the intervention condition, compared to the control condition, learned to associate healthy bodies with positive valence. Having learned to associate healthy bodies with positive valence, in turn, predicted reductions in body dissatisfaction. The intervention and control conditions were not directly associated with changes in body dissatisfaction.\r\nConclusion\r\nLearning to associate healthy bodies with any positive stimuli could be a relevant mechanism for understanding and predicting improvements in women's body dissatisfaction. Further research is required regarding the impact of contingency learning on the evaluation of other bodies, and the selection of other bodies for body-related social comparison processes." author: - first_name: Elena M. full_name: Tullius, Elena M. last_name: Tullius - first_name: Georg full_name: Halbeisen, Georg id: '85780' last_name: Halbeisen orcid: 0000-0002-9529-2215 - first_name: Georgios full_name: Paslakis, Georgios last_name: Paslakis citation: ama: Tullius EM, Halbeisen G, Paslakis G. Can evaluative pairings of others’ bodies improve body dissatisfaction indirectly? A randomized-controlled online study with adult women. Journal of Psychiatric Research. 2024;180:340-348. doi:10.1016/j.jpsychires.2024.11.012 apa: Tullius, E. M., Halbeisen, G., & Paslakis, G. (2024). Can evaluative pairings of others’ bodies improve body dissatisfaction indirectly? A randomized-controlled online study with adult women. Journal of Psychiatric Research, 180, 340–348. https://doi.org/10.1016/j.jpsychires.2024.11.012 bjps: Tullius EM, Halbeisen G and Paslakis G (2024) Can Evaluative Pairings of Others’ Bodies Improve Body Dissatisfaction Indirectly? A Randomized-Controlled Online Study with Adult Women. Journal of Psychiatric Research 180, 340–348. chicago: 'Tullius, Elena M., Georg Halbeisen, and Georgios Paslakis. “Can Evaluative Pairings of Others’ Bodies Improve Body Dissatisfaction Indirectly? A Randomized-Controlled Online Study with Adult Women.” Journal of Psychiatric Research 180 (2024): 340–48. https://doi.org/10.1016/j.jpsychires.2024.11.012.' chicago-de: 'Tullius, Elena M., Georg Halbeisen und Georgios Paslakis. 2024. Can evaluative pairings of others’ bodies improve body dissatisfaction indirectly? A randomized-controlled online study with adult women. Journal of Psychiatric Research 180: 340–348. doi:10.1016/j.jpsychires.2024.11.012, .' din1505-2-1: 'Tullius, Elena M. ; Halbeisen, Georg ; Paslakis, Georgios: Can evaluative pairings of others’ bodies improve body dissatisfaction indirectly? A randomized-controlled online study with adult women. In: Journal of Psychiatric Research Bd. 180. Amsterdam [u.a.] , Elsevier BV (2024), S. 340–348' havard: E.M. Tullius, G. Halbeisen, G. Paslakis, Can evaluative pairings of others’ bodies improve body dissatisfaction indirectly? A randomized-controlled online study with adult women, Journal of Psychiatric Research. 180 (2024) 340–348. ieee: 'E. M. Tullius, G. Halbeisen, and G. Paslakis, “Can evaluative pairings of others’ bodies improve body dissatisfaction indirectly? A randomized-controlled online study with adult women,” Journal of Psychiatric Research, vol. 180, pp. 340–348, 2024, doi: 10.1016/j.jpsychires.2024.11.012.' mla: Tullius, Elena M., et al. “Can Evaluative Pairings of Others’ Bodies Improve Body Dissatisfaction Indirectly? A Randomized-Controlled Online Study with Adult Women.” Journal of Psychiatric Research, vol. 180, 2024, pp. 340–48, https://doi.org/10.1016/j.jpsychires.2024.11.012. short: E.M. Tullius, G. Halbeisen, G. Paslakis, Journal of Psychiatric Research 180 (2024) 340–348. ufg: 'Tullius, Elena M./Halbeisen, Georg/Paslakis, Georgios: Can evaluative pairings of others’ bodies improve body dissatisfaction indirectly? A randomized-controlled online study with adult women, in: Journal of Psychiatric Research 180 (2024),  S. 340–348.' van: Tullius EM, Halbeisen G, Paslakis G. Can evaluative pairings of others’ bodies improve body dissatisfaction indirectly? A randomized-controlled online study with adult women. Journal of Psychiatric Research. 2024;180:340–8. date_created: 2026-03-25T14:37:24Z date_updated: 2026-03-25T15:16:51Z department: - _id: DEP1500 doi: 10.1016/j.jpsychires.2024.11.012 intvolume: ' 180' keyword: - Evaluative conditioning - Body image - Eating disorders - Contingency learning - Psychotherapy language: - iso: eng page: 340-348 place: 'Amsterdam [u.a.] ' publication: Journal of Psychiatric Research publication_identifier: eissn: - '1879-1379 ' issn: - 0022-3956 publication_status: published publisher: Elsevier BV quality_controlled: '1' status: public title: Can evaluative pairings of others’ bodies improve body dissatisfaction indirectly? A randomized-controlled online study with adult women type: scientific_journal_article user_id: '83781' volume: 180 year: '2024' ... --- _id: '13824' abstract: - lang: eng text: "This dataset provides synthetic training data for the real-world industrial application of terminal strip object detection to investigate the sim-to-real generalization performance of modern object detectors based on state-of-the-art image synthesis methods. It consists of 30.000 randomly generated synthetic images of terminal strips covering 36 different terminal blocks in five colors and additional accessories such as plug-in bridges, test adapters, end covers and markings. Except from the markings and the DIN rail all objects of the terminal strips are labeled with a bounding box and the respective object class for supervised learning. Additionally, 300 real images of terminal strips were taken and manually labeled for the real-world test.\r\n\r\nIf you use this datset for your research, please consider citing this: Investigation of the Impact of Synthetic Training Data in the Industrial Application of Terminal Strip Object Detection\r\n" author: - first_name: Nico full_name: Baumgart, Nico id: '88090' last_name: Baumgart - first_name: Markus full_name: Lange-Hegermann, Markus id: '71761' last_name: Lange-Hegermann - first_name: Mike full_name: Mücke, Mike last_name: Mücke citation: ama: Baumgart N, Lange-Hegermann M, Mücke M. Synthetic Training Dataset for Real-World Terminal Strip Object Detection. Zenodo; 2024. doi:10.5281/ZENODO.16080102 apa: Baumgart, N., Lange-Hegermann, M., & Mücke, M. (2024). Synthetic Training Dataset for Real-World Terminal Strip Object Detection. Zenodo. https://doi.org/10.5281/ZENODO.16080102 bjps: Baumgart N, Lange-Hegermann M and Mücke M (2024) Synthetic Training Dataset for Real-World Terminal Strip Object Detection. Zenodo. chicago: Baumgart, Nico, Markus Lange-Hegermann, and Mike Mücke. Synthetic Training Dataset for Real-World Terminal Strip Object Detection. Zenodo, 2024. https://doi.org/10.5281/ZENODO.16080102. chicago-de: Baumgart, Nico, Markus Lange-Hegermann und Mike Mücke. 2024. Synthetic Training Dataset for Real-World Terminal Strip Object Detection. Zenodo. doi:10.5281/ZENODO.16080102, . din1505-2-1: 'Baumgart, Nico ; Lange-Hegermann, Markus ; Mücke, Mike: Synthetic Training Dataset for Real-World Terminal Strip Object Detection : Zenodo, 2024' havard: N. Baumgart, M. Lange-Hegermann, M. Mücke, Synthetic Training Dataset for Real-World Terminal Strip Object Detection, Zenodo, 2024. ieee: 'N. Baumgart, M. Lange-Hegermann, and M. Mücke, Synthetic Training Dataset for Real-World Terminal Strip Object Detection. Zenodo, 2024. doi: 10.5281/ZENODO.16080102.' mla: Baumgart, Nico, et al. Synthetic Training Dataset for Real-World Terminal Strip Object Detection. Zenodo, 2024, https://doi.org/10.5281/ZENODO.16080102. short: N. Baumgart, M. Lange-Hegermann, M. Mücke, Synthetic Training Dataset for Real-World Terminal Strip Object Detection, Zenodo, 2024. ufg: 'Baumgart, Nico/Lange-Hegermann, Markus/Mücke, Mike: Synthetic Training Dataset for Real-World Terminal Strip Object Detection, o. O. 2024.' van: Baumgart N, Lange-Hegermann M, Mücke M. Synthetic Training Dataset for Real-World Terminal Strip Object Detection. Zenodo; 2024. date_created: 2026-06-16T14:07:26Z date_updated: 2026-07-24T11:34:50Z department: - _id: DEP5015 doi: 10.5281/ZENODO.16080102 keyword: - Object Detection - Image Synthesis - Domain Randomization - Domain Gap - Terminal Strip publisher: Zenodo status: public title: Synthetic Training Dataset for Real-World Terminal Strip Object Detection type: research_data user_id: '83781' year: '2024' ... --- _id: '10783' abstract: - lang: eng text: The development trend in manual assembly towards increasing demands in terms of quality, variety, and cost pressure makes the transition for people with cognitive disabilities to the general labor market extremely difficult. Nevertheless, this employment sector is a central component of many activities in a sheltered workshop. Therefore, this paper investigates the use of an informational assistance system for persons with cognitive impairments to close the gap between the characteristics of this group and the operational requirements. In this way, the transition from the sheltered workshop to the general labor market will be facilitated and promoted. author: - first_name: Sven full_name: Bendzioch, Sven id: '71395' last_name: Bendzioch - first_name: Sven full_name: Hinrichsen, Sven id: '49010' last_name: Hinrichsen citation: ama: Bendzioch S, Hinrichsen S. Informational Assistance System – a Key to Self-Empowerment of Persons with Cognitive Disabilities in Manual Assembly? Vol 11. AHFE International; 2023:548-556. doi:10.54941/ahfe1004061 apa: 'Bendzioch, S., & Hinrichsen, S. (2023). Informational Assistance System – a Key to Self-Empowerment of Persons with Cognitive Disabilities in Manual Assembly? In Human Interaction & Emerging Technologies (IHIET 2023): Artificial Intelligence & Future Applications (Vol. 11, pp. 548–556). AHFE International. https://doi.org/10.54941/ahfe1004061' bjps: Bendzioch S and Hinrichsen S (2023) Informational Assistance System – a Key to Self-Empowerment of Persons with Cognitive Disabilities in Manual Assembly? AHFE International. chicago: 'Bendzioch, Sven, and Sven Hinrichsen. Informational Assistance System – a Key to Self-Empowerment of Persons with Cognitive Disabilities in Manual Assembly? Human Interaction & Emerging Technologies (IHIET 2023): Artificial Intelligence & Future Applications. Vol. 11. Human Interaction and Emerging Technologies (IHIET 2023). AHFE International, 2023. https://doi.org/10.54941/ahfe1004061.' chicago-de: 'Bendzioch, Sven und Sven Hinrichsen. 2023. Informational Assistance System – a Key to Self-Empowerment of Persons with Cognitive Disabilities in Manual Assembly? Human Interaction & Emerging Technologies (IHIET 2023): Artificial Intelligence & Future Applications. Bd. 11. Human Interaction and Emerging Technologies (IHIET 2023). AHFE International. doi:10.54941/ahfe1004061, .' din1505-2-1: 'Bendzioch, Sven ; Hinrichsen, Sven: Informational Assistance System – a Key to Self-Empowerment of Persons with Cognitive Disabilities in Manual Assembly?, Human Interaction and Emerging Technologies (IHIET 2023). Bd. 11 : AHFE International, 2023' havard: S. Bendzioch, S. Hinrichsen, Informational Assistance System – a Key to Self-Empowerment of Persons with Cognitive Disabilities in Manual Assembly?, AHFE International, 2023. ieee: 'S. Bendzioch and S. Hinrichsen, Informational Assistance System – a Key to Self-Empowerment of Persons with Cognitive Disabilities in Manual Assembly?, vol. 11. AHFE International, 2023, pp. 548–556. doi: 10.54941/ahfe1004061.' mla: 'Bendzioch, Sven, and Sven Hinrichsen. “Informational Assistance System – a Key to Self-Empowerment of Persons with Cognitive Disabilities in Manual Assembly?” Human Interaction & Emerging Technologies (IHIET 2023): Artificial Intelligence & Future Applications, vol. 11, AHFE International, 2023, pp. 548–56, https://doi.org/10.54941/ahfe1004061.' short: S. Bendzioch, S. Hinrichsen, Informational Assistance System – a Key to Self-Empowerment of Persons with Cognitive Disabilities in Manual Assembly?, AHFE International, 2023. ufg: 'Bendzioch, Sven/Hinrichsen, Sven: Informational Assistance System – a Key to Self-Empowerment of Persons with Cognitive Disabilities in Manual Assembly?, Bd. 11, o. O. 2023 (Human Interaction and Emerging Technologies (IHIET 2023)).' van: 'Bendzioch S, Hinrichsen S. Informational Assistance System – a Key to Self-Empowerment of Persons with Cognitive Disabilities in Manual Assembly? Human Interaction & Emerging Technologies (IHIET 2023): Artificial Intelligence & Future Applications. AHFE International; 2023. (Human Interaction and Emerging Technologies (IHIET 2023); vol. 11).' conference: end_date: 2023-08-24 location: NIzza name: IHIET 2023 start_date: 2023-08-22 date_created: 2023-11-16T12:05:40Z date_updated: 2023-11-16T12:05:47Z department: - _id: DEP7020 - _id: DEP1305 doi: 10.54941/ahfe1004061 intvolume: ' 11' keyword: - Manual Assembly - Informational Assistance System - Image Processing System - People with Disabilities language: - iso: eng main_file_link: - open_access: '1' oa: '1' page: 548-556 publication: 'Human Interaction & Emerging Technologies (IHIET 2023): Artificial Intelligence & Future Applications' publication_identifier: issn: - 2771-0718 publication_status: published publisher: AHFE International quality_controlled: '1' series_title: Human Interaction and Emerging Technologies (IHIET 2023) status: public title: Informational Assistance System – a Key to Self-Empowerment of Persons with Cognitive Disabilities in Manual Assembly? type: conference_editor_article user_id: '83780' volume: 11 year: '2023' ... --- _id: '13583' abstract: - lang: eng text: Organ transplantation is associated with significant physical and psychological burden for the recipients. Qualitative reports indicate that organ recipients develop donor and donation images (DDI)—conceptions of the donor and/or the organ. A deeper understanding of DDI is needed in the care of transplant recipients. To present the current state of knowledge, we searched for and identified DDI-related publications in PubMed and Scopus. Inclusion criteria were (1) studies addressing transplant recipients, and (2) English or German language. Twenty-one studies of individuals with transplanted hearts, lungs, or kidneys were included in this scoping review. Prevalence for DDI ranged from 6% to 52.3%. DDI occurs both before and after transplantation and includes ideas about the donor as well as whether and how the recipient’s personality may be altered by the transplanted organ. Some transplant recipients did indeed report personality changes following transplantation due to the adoption of assumed donor characteristics. One study showed a positive association between the presence of DDI and anxiety scores and one described a coping effect. DDI is understudied and should be systematically assessed to improve care for the vulnerable group of individuals undergoing organ transplantation. Current research gaps and future directions are discussed. article_number: '952' author: - first_name: 'Nora M. ' full_name: 'Laskowski, Nora M. ' last_name: Laskowski - first_name: Gerrit full_name: Brandt, Gerrit last_name: Brandt - first_name: Katharina full_name: Tigges-Limmer, Katharina last_name: Tigges-Limmer - first_name: Georg full_name: Halbeisen, Georg id: '85780' last_name: Halbeisen orcid: 0000-0002-9529-2215 - first_name: Georgios full_name: Paslakis, Georgios last_name: Paslakis citation: ama: Laskowski NM, Brandt G, Tigges-Limmer K, Halbeisen G, Paslakis G. Donor and Donation Images (DDI)-A Scoping Review of What We Know and What We Don’t. Journal of Clinical Medicine. 2023;12(3). doi:10.3390/jcm12030952 apa: Laskowski, N. M., Brandt, G., Tigges-Limmer, K., Halbeisen, G., & Paslakis, G. (2023). Donor and Donation Images (DDI)-A Scoping Review of What We Know and What We Don’t. Journal of Clinical Medicine, 12(3), Article 952. https://doi.org/10.3390/jcm12030952 bjps: Laskowski NM et al. (2023) Donor and Donation Images (DDI)-A Scoping Review of What We Know and What We Don’t. Journal of Clinical Medicine 12. chicago: Laskowski, Nora M. , Gerrit Brandt, Katharina Tigges-Limmer, Georg Halbeisen, and Georgios Paslakis. “Donor and Donation Images (DDI)-A Scoping Review of What We Know and What We Don’t.” Journal of Clinical Medicine 12, no. 3 (2023). https://doi.org/10.3390/jcm12030952. chicago-de: Laskowski, Nora M. , Gerrit Brandt, Katharina Tigges-Limmer, Georg Halbeisen und Georgios Paslakis. 2023. Donor and Donation Images (DDI)-A Scoping Review of What We Know and What We Don’t. Journal of Clinical Medicine 12, Nr. 3. doi:10.3390/jcm12030952, . din1505-2-1: 'Laskowski, Nora M. ; Brandt, Gerrit ; Tigges-Limmer, Katharina ; Halbeisen, Georg ; Paslakis, Georgios: Donor and Donation Images (DDI)-A Scoping Review of What We Know and What We Don’t. In: Journal of Clinical Medicine Bd. 12. Basel, MDPI (2023), Nr. 3' havard: N.M. Laskowski, G. Brandt, K. Tigges-Limmer, G. Halbeisen, G. Paslakis, Donor and Donation Images (DDI)-A Scoping Review of What We Know and What We Don’t, Journal of Clinical Medicine. 12 (2023). ieee: 'N. M. Laskowski, G. Brandt, K. Tigges-Limmer, G. Halbeisen, and G. Paslakis, “Donor and Donation Images (DDI)-A Scoping Review of What We Know and What We Don’t,” Journal of Clinical Medicine, vol. 12, no. 3, Art. no. 952, 2023, doi: 10.3390/jcm12030952.' mla: Laskowski, Nora M., et al. “Donor and Donation Images (DDI)-A Scoping Review of What We Know and What We Don’t.” Journal of Clinical Medicine, vol. 12, no. 3, 952, 2023, https://doi.org/10.3390/jcm12030952. short: N.M. Laskowski, G. Brandt, K. Tigges-Limmer, G. Halbeisen, G. Paslakis, Journal of Clinical Medicine 12 (2023). ufg: 'Laskowski, Nora M. u. a.: Donor and Donation Images (DDI)-A Scoping Review of What We Know and What We Don’t, in: Journal of Clinical Medicine 12 (2023), H. 3.' van: Laskowski NM, Brandt G, Tigges-Limmer K, Halbeisen G, Paslakis G. Donor and Donation Images (DDI)-A Scoping Review of What We Know and What We Don’t. Journal of Clinical Medicine. 2023;12(3). date_created: 2026-03-25T13:36:11Z date_updated: 2026-03-27T09:54:09Z department: - _id: DEP1500 doi: 10.3390/jcm12030952 external_id: isi: - '000929666500001' pmid: - '36769600' intvolume: ' 12' isi: '1' issue: '3' keyword: - donor image - donation image - organ integration - organ transplantation - heart transplantation - lung transplantation - kidney transplantation - DDI - psychocardiology - scoping review language: - iso: eng place: Basel pmid: '1' publication: Journal of Clinical Medicine publication_identifier: eissn: - 2077-0383 publication_status: published publisher: MDPI quality_controlled: '1' status: public title: Donor and Donation Images (DDI)-A Scoping Review of What We Know and What We Don't type: scientific_journal_article user_id: '85780' volume: 12 year: '2023' ... --- _id: '13786' abstract: - lang: eng text: Due to the superior job performing abilities and increasing computational capabilities, collaborating with artificial-intelligence-based services (AIBS or AI-based services) will be inevitable for employees in the service context. AI-based services in the form of virtual (e.g., chatbot) or physical (e.g., service robot) embodiments, which are characterized by a higher degree of autonomy and are intended to augment the tasks of human employees in a highly collaborative way, will increasingly become an integral part of employee’s work environment. Semi-structured interviews and a focus group discussion have been used to identify constructs driving employees’ perception of AI-based services and their impact on wellbeing. Combined with a thorough literature analysis, relations between the identified constructs have been derived from introducing a conceptual model of employees’ willingness to collaborate (WTC). This study identifies technology characteristics, job demands, resources, and control as constructs, directly influencing employees’ perceived risk of AI-based services. author: - first_name: Stefanie full_name: Paluch, Stefanie last_name: Paluch - first_name: Thomas full_name: Wittkop, Thomas id: '61636' last_name: Wittkop citation: ama: 'Paluch S, Wittkop T. Role of Risk on Employees’ Willingness to Collaborate with Artificial Intelligence and its Impact on Wellbeing. In: Sheth JN, Jain V, Mogaji E, Ambika A, eds. Artificial Intelligence in Customer Service : The Next Frontier for Personalized Engagement . Springer International Publishing AG; 2023:281-302. doi:10.1007/978-3-031-33898-4_12' apa: 'Paluch, S., & Wittkop, T. (2023). Role of Risk on Employees’ Willingness to Collaborate with Artificial Intelligence and its Impact on Wellbeing. In J. N. Sheth, V. Jain, E. Mogaji, & A. Ambika (Eds.), Artificial Intelligence in Customer Service : The Next Frontier for Personalized Engagement (pp. 281–302). Springer International Publishing AG. https://doi.org/10.1007/978-3-031-33898-4_12' bjps: 'Paluch S and Wittkop T (2023) Role of Risk on Employees’ Willingness to Collaborate with Artificial Intelligence and Its Impact on Wellbeing. In Sheth JN et al. (eds), Artificial Intelligence in Customer Service : The Next Frontier for Personalized Engagement . Cham: Springer International Publishing AG, pp. 281–302.' chicago: 'Paluch, Stefanie, and Thomas Wittkop. “Role of Risk on Employees’ Willingness to Collaborate with Artificial Intelligence and Its Impact on Wellbeing.” In Artificial Intelligence in Customer Service : The Next Frontier for Personalized Engagement , edited by Jagdish N. Sheth, Varsha Jain, Emmanuel Mogaji, and Anupama Ambika, 281–302. Cham: Springer International Publishing AG, 2023. https://doi.org/10.1007/978-3-031-33898-4_12.' chicago-de: 'Paluch, Stefanie und Thomas Wittkop. 2023. Role of Risk on Employees’ Willingness to Collaborate with Artificial Intelligence and its Impact on Wellbeing. In: Artificial Intelligence in Customer Service : The Next Frontier for Personalized Engagement , hg. von Jagdish N. Sheth, Varsha Jain, Emmanuel Mogaji, und Anupama Ambika, 281–302. Cham: Springer International Publishing AG. doi:10.1007/978-3-031-33898-4_12, .' din1505-2-1: 'Paluch, Stefanie ; Wittkop, Thomas: Role of Risk on Employees’ Willingness to Collaborate with Artificial Intelligence and its Impact on Wellbeing. In: Sheth, J. N. ; Jain, V. ; Mogaji, E. ; Ambika, A. (Hrsg.): Artificial Intelligence in Customer Service : The Next Frontier for Personalized Engagement . Cham : Springer International Publishing AG, 2023, S. 281–302' havard: 'S. Paluch, T. Wittkop, Role of Risk on Employees’ Willingness to Collaborate with Artificial Intelligence and its Impact on Wellbeing, in: J.N. Sheth, V. Jain, E. Mogaji, A. Ambika (Eds.), Artificial Intelligence in Customer Service : The Next Frontier for Personalized Engagement , Springer International Publishing AG, Cham, 2023: pp. 281–302.' ieee: 'S. Paluch and T. Wittkop, “Role of Risk on Employees’ Willingness to Collaborate with Artificial Intelligence and its Impact on Wellbeing,” in Artificial Intelligence in Customer Service : The Next Frontier for Personalized Engagement , J. N. Sheth, V. Jain, E. Mogaji, and A. Ambika, Eds. Cham: Springer International Publishing AG, 2023, pp. 281–302. doi: 10.1007/978-3-031-33898-4_12.' mla: 'Paluch, Stefanie, and Thomas Wittkop. “Role of Risk on Employees’ Willingness to Collaborate with Artificial Intelligence and Its Impact on Wellbeing.” Artificial Intelligence in Customer Service : The Next Frontier for Personalized Engagement , edited by Jagdish N. Sheth et al., Springer International Publishing AG, 2023, pp. 281–302, https://doi.org/10.1007/978-3-031-33898-4_12.' short: 'S. Paluch, T. Wittkop, in: J.N. Sheth, V. Jain, E. Mogaji, A. Ambika (Eds.), Artificial Intelligence in Customer Service : The Next Frontier for Personalized Engagement , Springer International Publishing AG, Cham, 2023, pp. 281–302.' ufg: 'Paluch, Stefanie/Wittkop, Thomas: Role of Risk on Employees’ Willingness to Collaborate with Artificial Intelligence and its Impact on Wellbeing, in: Sheth, Jagdish N. u. a. (Hgg.): Artificial Intelligence in Customer Service : The Next Frontier for Personalized Engagement , Cham 2023,  S. 281–302.' van: 'Paluch S, Wittkop T. Role of Risk on Employees’ Willingness to Collaborate with Artificial Intelligence and its Impact on Wellbeing. In: Sheth JN, Jain V, Mogaji E, Ambika A, editors. Artificial Intelligence in Customer Service : The Next Frontier for Personalized Engagement . Cham: Springer International Publishing AG; 2023. p. 281–302.' date_created: 2026-05-26T17:34:27Z date_updated: 2026-05-27T12:09:44Z department: - _id: DEP3019 doi: 10.1007/978-3-031-33898-4_12 editor: - first_name: Jagdish N. full_name: Sheth, Jagdish N. last_name: Sheth - first_name: 'Varsha ' full_name: 'Jain, Varsha ' last_name: Jain - first_name: 'Emmanuel ' full_name: 'Mogaji, Emmanuel ' last_name: Mogaji - first_name: 'Anupama ' full_name: 'Ambika, Anupama ' last_name: Ambika keyword: - Artificial intelligence - AI-based services - Willingness to collaborate - Employees’ wellbeing language: - iso: eng page: 281–302 place: Cham publication: 'Artificial Intelligence in Customer Service : The Next Frontier for Personalized Engagement ' publication_identifier: eisbn: - '978-3-031-33898-4 ' isbn: - 978-3-031-33897-7 publication_status: published publisher: Springer International Publishing AG status: public title: Role of Risk on Employees’ Willingness to Collaborate with Artificial Intelligence and its Impact on Wellbeing type: book_chapter user_id: '83781' year: '2023' ... --- _id: '7670' abstract: - lang: eng text: Additive manufacturing (AM) and rapid prototyping process (RPP) have revolutionized the production of 3D objects in the last few decades. RPP has considerably increased the rate of production and the possibility of manufacturing prototypes in the fields of electrical, optical, and mechanical engineering. The manufacturing of optical prototypes including spherical, aspheric, and special kinds of lenses and lens arrays has reformed the fabrication of optical components. In this paper, specifically designed lens array prototypes for application in visible light communication (VLC) are introduced. These lens array prototypes are manufactured using the stereolithography apparatus (SLA) process. These lens arrays are designed to achieve optimal transmission of the light beam for VLC systems. One of the prototypes from the lens arrays contains primarily four spherical lenses and one thicker convex lens and the other contains one fresnel lens as a substitute for thicker convex lens. These lens arrays are further post-processed to achieve the required transparency. These lens array prototypes are tested using laser and LEDs. The ON-OFF keying modulated light beam was transmitted through the lens array at the sender side and focused on the photo-receiver using another lens array at the receiver side which is 200 cm apart. After evaluating these lens prototypes, it can be concluded that with appropriate post-processing and high-resolution stereolithography based manufacturing, a low data rate VLC link can be formed. author: - first_name: Abhijeet Narendra full_name: Shrotri, Abhijeet Narendra id: '74090' last_name: Shrotri orcid: 0000-0003-2116-156X - first_name: Micha full_name: Beyer, Micha id: '71403' last_name: Beyer - first_name: Daniel Johann full_name: Schneider, Daniel Johann id: '71057' last_name: Schneider - first_name: Oliver full_name: Stübbe, Oliver id: '51864' last_name: Stübbe orcid: https://orcid.org/0000-0001-7293-6893 citation: ama: Shrotri AN, Beyer M, Schneider DJ, Stübbe O. Manufacturing of Lens Array Prototypes Containing Spherical and Fresnel Lenses for Visible Light Communications Using Stereolithography Apparatus. Vol 11677. (Helvajian H, Gu B, Chen H, eds.). Society of Photo-Optical Instrumentation Engineers; 2021. doi:10.1117/12.2586907 apa: Shrotri, A. N., Beyer, M., Schneider, D. J., & Stübbe, O. (2021). Manufacturing of lens array prototypes containing spherical and fresnel lenses for visible light communications using stereolithography apparatus. In H. Helvajian, B. Gu, & H. Chen (Eds.), Laser 3D Manufacturing VIII (Vol. 11677). Society of Photo-Optical Instrumentation Engineers. https://doi.org/10.1117/12.2586907 bjps: 'Shrotri AN et al. (2021) Manufacturing of Lens Array Prototypes Containing Spherical and Fresnel Lenses for Visible Light Communications Using Stereolithography Apparatus, Helvajian H, Gu B and Chen H (eds). San Francisco: Society of Photo-Optical Instrumentation Engineers.' chicago: 'Shrotri, Abhijeet Narendra, Micha Beyer, Daniel Johann Schneider, and Oliver Stübbe. Manufacturing of Lens Array Prototypes Containing Spherical and Fresnel Lenses for Visible Light Communications Using Stereolithography Apparatus. Edited by Henry Helvajian, Bo Gu, and Hongqiang Chen. Laser 3D Manufacturing VIII. Vol. 11677. Proceedings of SPIE. San Francisco: Society of Photo-Optical Instrumentation Engineers, 2021. https://doi.org/10.1117/12.2586907.' chicago-de: 'Shrotri, Abhijeet Narendra, Micha Beyer, Daniel Johann Schneider und Oliver Stübbe. 2021. Manufacturing of lens array prototypes containing spherical and fresnel lenses for visible light communications using stereolithography apparatus. Hg. von Henry Helvajian, Bo Gu, und Hongqiang Chen. Laser 3D Manufacturing VIII. Bd. 11677. Proceedings of SPIE. San Francisco: Society of Photo-Optical Instrumentation Engineers. doi:10.1117/12.2586907, .' din1505-2-1: 'Shrotri, Abhijeet Narendra ; Beyer, Micha ; Schneider, Daniel Johann ; Stübbe, Oliver ; Helvajian, H. ; Gu, B. ; Chen, H. (Hrsg.): Manufacturing of lens array prototypes containing spherical and fresnel lenses for visible light communications using stereolithography apparatus, Proceedings of SPIE. Bd. 11677. San Francisco : Society of Photo-Optical Instrumentation Engineers, 2021' havard: A.N. Shrotri, M. Beyer, D.J. Schneider, O. Stübbe, Manufacturing of lens array prototypes containing spherical and fresnel lenses for visible light communications using stereolithography apparatus, Society of Photo-Optical Instrumentation Engineers, San Francisco, 2021. ieee: 'A. N. Shrotri, M. Beyer, D. J. Schneider, and O. Stübbe, Manufacturing of lens array prototypes containing spherical and fresnel lenses for visible light communications using stereolithography apparatus, vol. 11677. San Francisco: Society of Photo-Optical Instrumentation Engineers, 2021. doi: 10.1117/12.2586907.' mla: Shrotri, Abhijeet Narendra, et al. “Manufacturing of Lens Array Prototypes Containing Spherical and Fresnel Lenses for Visible Light Communications Using Stereolithography Apparatus.” Laser 3D Manufacturing VIII, edited by Henry Helvajian et al., vol. 11677, Society of Photo-Optical Instrumentation Engineers, 2021, https://doi.org/10.1117/12.2586907. short: A.N. Shrotri, M. Beyer, D.J. Schneider, O. Stübbe, Manufacturing of Lens Array Prototypes Containing Spherical and Fresnel Lenses for Visible Light Communications Using Stereolithography Apparatus, Society of Photo-Optical Instrumentation Engineers, San Francisco, 2021. ufg: 'Shrotri, Abhijeet Narendra u. a.: Manufacturing of lens array prototypes containing spherical and fresnel lenses for visible light communications using stereolithography apparatus, Bd. 11677, hg. von Helvajian, Henry/Gu, Bo/Chen, Hongqiang, San Francisco 2021 (Proceedings of SPIE).' van: 'Shrotri AN, Beyer M, Schneider DJ, Stübbe O. Manufacturing of lens array prototypes containing spherical and fresnel lenses for visible light communications using stereolithography apparatus. Helvajian H, Gu B, Chen H, editors. Laser 3D Manufacturing VIII. San Francisco: Society of Photo-Optical Instrumentation Engineers; 2021. (Proceedings of SPIE; vol. 11677).' conference: end_date: 2021-02-02 location: 'San Francisco ' name: SPIE Photonics West LASE Proc. SPIE 11677, Laser 3D Manufacturing VIII, 1167717 start_date: 2021-01-28 date_created: 2022-04-19T10:20:55Z date_updated: 2024-04-19T11:54:33Z department: - _id: DEP5020 - _id: DEP6020 - _id: DEP5000 doi: 10.1117/12.2586907 editor: - first_name: Henry full_name: Helvajian, Henry last_name: Helvajian - first_name: Bo full_name: Gu, Bo last_name: Gu - first_name: Hongqiang full_name: Chen, Hongqiang last_name: Chen intvolume: ' 11677' keyword: - Additive manufacturing - 3D printing - Stereolithography apparatus - Spherical lenses - Fresnel lenses - Visible light communication language: - iso: eng main_file_link: - url: https://doi.org/10.1117/12.2586907 place: San Francisco publication: Laser 3D Manufacturing VIII publication_identifier: eisbn: - 978-1-5106-4190-7 eissn: - 1996-756X isbn: - 978-1-5106-4189-1 issn: - 0277-786X publication_status: published publisher: Society of Photo-Optical Instrumentation Engineers series_title: Proceedings of SPIE status: public title: Manufacturing of lens array prototypes containing spherical and fresnel lenses for visible light communications using stereolithography apparatus type: conference_editor_article user_id: '51864' volume: 11677 year: '2021' ... --- _id: '7676' author: - first_name: Abhijeet Narendra full_name: Shrotri, Abhijeet Narendra id: '74090' last_name: Shrotri orcid: 0000-0003-2116-156X - first_name: Micha full_name: Beyer, Micha id: '71403' last_name: Beyer - first_name: Oliver full_name: Stübbe, Oliver id: '51864' last_name: Stübbe orcid: https://orcid.org/0000-0001-7293-6893 citation: ama: Shrotri AN, Beyer M, Stübbe O. Manufacturing and Analyzing of Cost-Efficient Fresnel Lenses Using Stereolithography. Vol 11349. (von Freymann G, Herkommer AM, Flury M, eds.). SPIE; 2020. doi:10.1117/12.2555367 apa: 'Shrotri, A. N., Beyer, M., & Stübbe, O. (2020). Manufacturing and analyzing of cost-efficient fresnel lenses using stereolithography. In G. von Freymann, A. M. Herkommer, & M. Flury (Eds.), 3D Printed Optics and Additive Photonic Manufacturing II : 6-10 April 2020, online only, France (Vol. 11349). SPIE. https://doi.org/10.1117/12.2555367' bjps: 'Shrotri AN, Beyer M and Stübbe O (2020) Manufacturing and Analyzing of Cost-Efficient Fresnel Lenses Using Stereolithography, von Freymann G, Herkommer AM and Flury M (eds). Bellingham, Washington, USA: SPIE.' chicago: 'Shrotri, Abhijeet Narendra, Micha Beyer, and Oliver Stübbe. Manufacturing and Analyzing of Cost-Efficient Fresnel Lenses Using Stereolithography. Edited by Georg von Freymann, Alois M. Herkommer, and Manuel Flury. 3D Printed Optics and Additive Photonic Manufacturing II : 6-10 April 2020, Online Only, France . Vol. 11349. Proceedings of SPIE. Bellingham, Washington, USA: SPIE, 2020. https://doi.org/10.1117/12.2555367.' chicago-de: 'Shrotri, Abhijeet Narendra, Micha Beyer und Oliver Stübbe. 2020. Manufacturing and analyzing of cost-efficient fresnel lenses using stereolithography. Hg. von Georg von Freymann, Alois M. Herkommer, und Manuel Flury. 3D Printed Optics and Additive Photonic Manufacturing II : 6-10 April 2020, online only, France . Bd. 11349. Proceedings of SPIE. Bellingham, Washington, USA: SPIE. doi:10.1117/12.2555367, .' din1505-2-1: 'Shrotri, Abhijeet Narendra ; Beyer, Micha ; Stübbe, Oliver ; von Freymann, G. ; Herkommer, A. M. ; Flury, M. (Hrsg.): Manufacturing and analyzing of cost-efficient fresnel lenses using stereolithography, Proceedings of SPIE. Bd. 11349. Bellingham, Washington, USA : SPIE, 2020' havard: A.N. Shrotri, M. Beyer, O. Stübbe, Manufacturing and analyzing of cost-efficient fresnel lenses using stereolithography, SPIE, Bellingham, Washington, USA, 2020. ieee: 'A. N. Shrotri, M. Beyer, and O. Stübbe, Manufacturing and analyzing of cost-efficient fresnel lenses using stereolithography, vol. 11349. Bellingham, Washington, USA: SPIE, 2020. doi: 10.1117/12.2555367.' mla: 'Shrotri, Abhijeet Narendra, et al. “Manufacturing and Analyzing of Cost-Efficient Fresnel Lenses Using Stereolithography.” 3D Printed Optics and Additive Photonic Manufacturing II : 6-10 April 2020, Online Only, France , edited by Georg von Freymann et al., vol. 11349, SPIE, 2020, https://doi.org/10.1117/12.2555367.' short: A.N. Shrotri, M. Beyer, O. Stübbe, Manufacturing and Analyzing of Cost-Efficient Fresnel Lenses Using Stereolithography, SPIE, Bellingham, Washington, USA, 2020. ufg: 'Shrotri, Abhijeet Narendra/Beyer, Micha/Stübbe, Oliver: Manufacturing and analyzing of cost-efficient fresnel lenses using stereolithography, Bd. 11349, hg. von Freymann, Georg von/Herkommer, Alois M./Flury, Manuel, Bellingham, Washington, USA 2020 ( Proceedings of SPIE).' van: 'Shrotri AN, Beyer M, Stübbe O. Manufacturing and analyzing of cost-efficient fresnel lenses using stereolithography. von Freymann G, Herkommer AM, Flury M, editors. 3D Printed Optics and Additive Photonic Manufacturing II : 6-10 April 2020, online only, France . Bellingham, Washington, USA: SPIE; 2020. ( Proceedings of SPIE; vol. 11349).' conference: end_date: 2020-04-10 location: Strasbourg (online) name: 3D Printed Optics and Additive Photonic Manufacturing ; SPIE Photonics Europe - Digital Forum start_date: 2020-04-06 date_created: 2022-04-19T10:46:32Z date_updated: 2024-04-19T12:02:02Z department: - _id: DEP5020 - _id: DEP6020 - _id: DEP5000 doi: 10.1117/12.2555367 editor: - first_name: Georg full_name: von Freymann, Georg last_name: von Freymann - first_name: Alois M. full_name: Herkommer, Alois M. last_name: Herkommer - first_name: Manuel full_name: Flury, Manuel last_name: Flury intvolume: ' 11349' keyword: - Fresnel lenses - Stereolithography apparatus - 3D printing - Photo-polymerization language: - iso: eng place: Bellingham, Washington, USA publication: '3D Printed Optics and Additive Photonic Manufacturing II : 6-10 April 2020, online only, France ' publication_identifier: eisbn: - ' 978-1-5106-3471-8 ' eissn: - 1996-756X isbn: - 978-1-5106-3470-1 issn: - 0277-786X publication_status: published publisher: SPIE series_title: ' Proceedings of SPIE' status: public title: Manufacturing and analyzing of cost-efficient fresnel lenses using stereolithography type: conference_editor_article user_id: '51864' volume: 11349 year: '2020' ... --- _id: '7679' author: - first_name: Abhijeet Narendra full_name: Shrotri, Abhijeet Narendra id: '74090' last_name: Shrotri orcid: 0000-0003-2116-156X - first_name: Micha full_name: Beyer, Micha id: '71403' last_name: Beyer - first_name: Oliver full_name: Stübbe, Oliver id: '51864' last_name: Stübbe orcid: https://orcid.org/0000-0001-7293-6893 citation: ama: Shrotri AN, Beyer M, Stübbe O. Evaluation of Stereolithograghy Processes for the Production of Lens Prototypes. Vol 2019, 01. (Padoano E, Villmer FJ, eds.). Technische Hochschule Ostwestfalen-Lippe; 2019:227-240. apa: 'Shrotri, A. N., Beyer, M., & Stübbe, O. (2019). Evaluation of stereolithograghy processes for the production of lens prototypes. In E. Padoano & F.-J. Villmer (Eds.),   Production engineering and management : proceedings 9th international conference, October 03 and 04, 2019, Trieste, Italy (Vols. 2019, 01, pp. 227–240). Technische Hochschule Ostwestfalen-Lippe.' bjps: 'Shrotri AN, Beyer M and Stübbe O (2019) Evaluation of Stereolithograghy Processes for the Production of Lens Prototypes, Padoano E and Villmer F-J (eds). Lemgo: Technische Hochschule Ostwestfalen-Lippe.' chicago: 'Shrotri, Abhijeet Narendra, Micha Beyer, and Oliver Stübbe. Evaluation of Stereolithograghy Processes for the Production of Lens Prototypes. Edited by Elio Padoano and Franz-Josef Villmer.   Production Engineering and Management : Proceedings 9th International Conference, October 03 and 04, 2019, Trieste, Italy. Vol. 2019, 01. Publication Series in Direct Digital Manufacturing . Lemgo: Technische Hochschule Ostwestfalen-Lippe, 2019.' chicago-de: 'Shrotri, Abhijeet Narendra, Micha Beyer und Oliver Stübbe. 2019. Evaluation of stereolithograghy processes for the production of lens prototypes. Hg. von Elio Padoano und Franz-Josef Villmer.   Production engineering and management : proceedings 9th international conference, October 03 and 04, 2019, Trieste, Italy. Bd. 2019, 01. Publication series in direct digital manufacturing . Lemgo: Technische Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Shrotri, Abhijeet Narendra ; Beyer, Micha ; Stübbe, Oliver ; Padoano, E. ; Villmer, F.-J. (Hrsg.): Evaluation of stereolithograghy processes for the production of lens prototypes, Publication series in direct digital manufacturing . Bd. 2019, 01. Lemgo : Technische Hochschule Ostwestfalen-Lippe, 2019' havard: A.N. Shrotri, M. Beyer, O. Stübbe, Evaluation of stereolithograghy processes for the production of lens prototypes, Technische Hochschule Ostwestfalen-Lippe, Lemgo, 2019. ieee: 'A. N. Shrotri, M. Beyer, and O. Stübbe, Evaluation of stereolithograghy processes for the production of lens prototypes, vol. 2019, 01. Lemgo: Technische Hochschule Ostwestfalen-Lippe, 2019, pp. 227–240.' mla: 'Shrotri, Abhijeet Narendra, et al. “Evaluation of Stereolithograghy Processes for the Production of Lens Prototypes.”   Production Engineering and Management : Proceedings 9th International Conference, October 03 and 04, 2019, Trieste, Italy, edited by Elio Padoano and Franz-Josef Villmer, vol. 2019, 01, Technische Hochschule Ostwestfalen-Lippe, 2019, pp. 227–40.' short: A.N. Shrotri, M. Beyer, O. Stübbe, Evaluation of Stereolithograghy Processes for the Production of Lens Prototypes, Technische Hochschule Ostwestfalen-Lippe, Lemgo, 2019. ufg: 'Shrotri, Abhijeet Narendra/Beyer, Micha/Stübbe, Oliver: Evaluation of stereolithograghy processes for the production of lens prototypes, Bd. 2019, 01, hg. von Padoano, Elio/Villmer, Franz-Josef, Lemgo 2019 (Publication series in direct digital manufacturing ).' van: 'Shrotri AN, Beyer M, Stübbe O. Evaluation of stereolithograghy processes for the production of lens prototypes. Padoano E, Villmer FJ, editors.   Production engineering and management : proceedings 9th international conference, October 03 and 04, 2019, Trieste, Italy. Lemgo: Technische Hochschule Ostwestfalen-Lippe; 2019. (Publication series in direct digital manufacturing ; vols. 2019, 01).' conference: end_date: 2019-10-04 location: Trieste name: 9th International Conference on Production Engineering and Management (PEM) start_date: 2019-10-03 date_created: 2022-04-19T10:59:03Z date_updated: 2024-04-19T12:54:20Z department: - _id: DEP5020 - _id: DEP6020 - _id: DEP5000 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer keyword: - 3D printing - stereolithography - optical lens - light forming structures - convex lenses - concave lenses - refraction of light - focal length language: - iso: eng page: 227-240 place: Lemgo publication: "\t Production engineering and management : proceedings 9th international conference, October 03 and 04, 2019, Trieste, Italy" publication_identifier: isbn: - 978-3-946856-04-7 publication_status: published publisher: Technische Hochschule Ostwestfalen-Lippe series_title: 'Publication series in direct digital manufacturing ' status: public title: Evaluation of stereolithograghy processes for the production of lens prototypes type: conference_editor_article user_id: '51864' volume: 2019, 01 year: '2019' ... --- _id: '1721' abstract: - lang: eng text: In this contribution, the effect of the presence of a presumed inert gas like N2 in the feed gas on the biological methanation of hydrogen and carbon dioxide with Methanothermobacter marburgensis was investigated. N2 can be found as a component besides CO2 in possible feed gases like mine gas, weak gas, or steel mill gas. To determine whether there is an effect on the biological methanation of CO2 and H2 from renewable sources or not, the process was investigated using feed gases containing CO2, H2, and N2 in different ratios, depending on the CO2 content. A possible effect can be a lowered conversion rate of CO2 and H2 to CH4. Feed gases containing up to 47N2 were investigated. The conversion of hydrogen and carbon dioxide was possible with a conversion rate of up to 91 but was limited by the amount of H2 when feeding a stoichiometric ratio of 4:1 and not by adding N2 to the feed gas. article_number: '56' author: - first_name: Marc Philippe full_name: Hoffarth, Marc Philippe id: '42198' last_name: Hoffarth - first_name: Timo full_name: Broeker, Timo id: '43927' last_name: Broeker - first_name: Jan full_name: Schneider, Jan id: '13209' last_name: Schneider orcid: 0000-0001-6401-8873 citation: ama: Hoffarth MP, Broeker T, Schneider J. Effect of N2 on Biological Methanation in a Continuous Stirred-Tank Reactor with Methanothermobacter marburgensis. Fermentation. 2019;5(3). doi:10.3390/fermentation5030056 apa: Hoffarth, M. P., Broeker, T., & Schneider, J. (2019). Effect of N2 on Biological Methanation in a Continuous Stirred-Tank Reactor with Methanothermobacter marburgensis. Fermentation, 5(3), Article 56. https://doi.org/10.3390/fermentation5030056 bjps: Hoffarth MP, Broeker T and Schneider J (2019) Effect of N2 on Biological Methanation in a Continuous Stirred-Tank Reactor with Methanothermobacter Marburgensis. Fermentation 5. chicago: Hoffarth, Marc Philippe, Timo Broeker, and Jan Schneider. “Effect of N2 on Biological Methanation in a Continuous Stirred-Tank Reactor with Methanothermobacter Marburgensis.” Fermentation 5, no. 3 (2019). https://doi.org/10.3390/fermentation5030056. chicago-de: Hoffarth, Marc Philippe, Timo Broeker und Jan Schneider. 2019. Effect of N2 on Biological Methanation in a Continuous Stirred-Tank Reactor with Methanothermobacter marburgensis. Fermentation 5, Nr. 3. doi:10.3390/fermentation5030056, . din1505-2-1: 'Hoffarth, Marc Philippe ; Broeker, Timo ; Schneider, Jan: Effect of N2 on Biological Methanation in a Continuous Stirred-Tank Reactor with Methanothermobacter marburgensis. In: Fermentation Bd. 5, MDPI (2019), Nr. 3' havard: M.P. Hoffarth, T. Broeker, J. Schneider, Effect of N2 on Biological Methanation in a Continuous Stirred-Tank Reactor with Methanothermobacter marburgensis, Fermentation. 5 (2019). ieee: 'M. P. Hoffarth, T. Broeker, and J. Schneider, “Effect of N2 on Biological Methanation in a Continuous Stirred-Tank Reactor with Methanothermobacter marburgensis,” Fermentation, vol. 5, no. 3, Art. no. 56, 2019, doi: 10.3390/fermentation5030056.' mla: Hoffarth, Marc Philippe, et al. “Effect of N2 on Biological Methanation in a Continuous Stirred-Tank Reactor with Methanothermobacter Marburgensis.” Fermentation, vol. 5, no. 3, 56, 2019, https://doi.org/10.3390/fermentation5030056. short: M.P. Hoffarth, T. Broeker, J. Schneider, Fermentation 5 (2019). ufg: 'Hoffarth, Marc Philippe/Broeker, Timo/Schneider, Jan: Effect of N2 on Biological Methanation in a Continuous Stirred-Tank Reactor with Methanothermobacter marburgensis, in: Fermentation 5 (2019), H. 3.' van: Hoffarth MP, Broeker T, Schneider J. Effect of N2 on Biological Methanation in a Continuous Stirred-Tank Reactor with Methanothermobacter marburgensis. Fermentation. 2019;5(3). date_created: 2019-07-30T09:33:08Z date_updated: 2024-05-17T11:23:55Z department: - _id: DEP4018 doi: 10.3390/fermentation5030056 intvolume: ' 5' issue: '3' keyword: - biological methanation - CSTR - Methanothermobacter marburgensis - methane - carbon dioxide - dinitrogen - hydrogen - power-to-gas language: - iso: eng main_file_link: - open_access: '1' url: https://www.mdpi.com/2311-5637/5/3/56 oa: '1' publication: Fermentation publication_identifier: issn: - 2311-5637 publication_status: published publisher: 'MDPI ' status: public title: Effect of N2 on Biological Methanation in a Continuous Stirred-Tank Reactor with Methanothermobacter marburgensis type: journal_article user_id: '83778' volume: 5 year: '2019' ... --- _id: '1901' abstract: - lang: eng text: 'As customers’ options for configuring products to match their requirements increase, the number of assembly variants grows. Due to this large number of variants, assembly processes often cannot be automated in an economical way, and manual assembly remains highly important. Additional support options must be implemented to continue completing manual assembly processes reliably in the future. Image processing systems are one promising approach. The purpose of this paper is to establish the potential offered by industrial image processing in manual assembly, building on fundamental concepts, as well as to identify requirements and provide recommendations for selecting and arranging system components. ' author: - first_name: Alexander full_name: Nikolenko, Alexander id: '71431' last_name: Nikolenko - first_name: Sven full_name: Hinrichsen, Sven id: '49010' last_name: Hinrichsen citation: ama: 'Nikolenko A, Hinrichsen S. Potential of Industrial Image Processing in Manual Assembly. In: Ahram T, Karwowski W, Pickl S, Taiar R, eds. Human Systems Engineering and Design II. IHSED 2019. Advances in Intelligent Systems and Computing. Vol 1026. Advances in Intelligent Systems and Computing. Cham: Springer Nature; 2019:795-800. doi:https://doi.org/10.1007/978-3-030-27928-8_121' apa: 'Nikolenko, A., & Hinrichsen, S. (2019). Potential of Industrial Image Processing in Manual Assembly. In T. Ahram, W. Karwowski, S. Pickl, & R. Taiar (Eds.), Human Systems Engineering and Design II. IHSED 2019. Advances in Intelligent Systems and Computing (Vol. 1026, pp. 795–800). Cham: Springer Nature. https://doi.org/10.1007/978-3-030-27928-8_121' bjps: 'Nikolenko A and Hinrichsen S (2019) Potential of Industrial Image Processing in Manual Assembly. In Ahram T et al. (eds), Human Systems Engineering and Design II. IHSED 2019. Advances in Intelligent Systems and Computing, vol. 1026. Cham: Springer Nature, pp. 795–800.' chicago: 'Nikolenko, Alexander, and Sven Hinrichsen. “Potential of Industrial Image Processing in Manual Assembly.” In Human Systems Engineering and Design II. IHSED 2019. Advances in Intelligent Systems and Computing, edited by T. Ahram, W. Karwowski, S. Pickl, and R. Taiar, 1026:795–800. Advances in Intelligent Systems and Computing. Cham: Springer Nature, 2019. https://doi.org/10.1007/978-3-030-27928-8_121.' chicago-de: 'Nikolenko, Alexander und Sven Hinrichsen. 2019. Potential of Industrial Image Processing in Manual Assembly. In: Human Systems Engineering and Design II. IHSED 2019. Advances in Intelligent Systems and Computing, hg. von T. Ahram, W. Karwowski, S. Pickl, und R. Taiar, 1026:795–800. Advances in Intelligent Systems and Computing. Cham: Springer Nature. doi:https://doi.org/10.1007/978-3-030-27928-8_121, .' din1505-2-1: 'Nikolenko, Alexander ; Hinrichsen, Sven: Potential of Industrial Image Processing in Manual Assembly. In: Ahram, T. ; Karwowski, W. ; Pickl, S. ; Taiar, R. (Hrsg.): Human Systems Engineering and Design II. IHSED 2019. Advances in Intelligent Systems and Computing, Advances in Intelligent Systems and Computing. Bd. 1026. Cham : Springer Nature, 2019, S. 795–800' havard: 'A. Nikolenko, S. Hinrichsen, Potential of Industrial Image Processing in Manual Assembly, in: T. Ahram, W. Karwowski, S. Pickl, R. Taiar (Eds.), Human Systems Engineering and Design II. IHSED 2019. Advances in Intelligent Systems and Computing, Springer Nature, Cham, 2019: pp. 795–800.' ieee: A. Nikolenko and S. Hinrichsen, “Potential of Industrial Image Processing in Manual Assembly,” in Human Systems Engineering and Design II. IHSED 2019. Advances in Intelligent Systems and Computing, Universität der Bundeswehr, München, 2019, vol. 1026, pp. 795–800. mla: Nikolenko, Alexander, and Sven Hinrichsen. “Potential of Industrial Image Processing in Manual Assembly.” Human Systems Engineering and Design II. IHSED 2019. Advances in Intelligent Systems and Computing, edited by T. Ahram et al., vol. 1026, Springer Nature, 2019, pp. 795–800, doi:https://doi.org/10.1007/978-3-030-27928-8_121. short: 'A. Nikolenko, S. Hinrichsen, in: T. Ahram, W. Karwowski, S. Pickl, R. Taiar (Eds.), Human Systems Engineering and Design II. IHSED 2019. Advances in Intelligent Systems and Computing, Springer Nature, Cham, 2019, pp. 795–800.' ufg: 'Nikolenko, Alexander/Hinrichsen, Sven (2019): Potential of Industrial Image Processing in Manual Assembly, in: T. Ahram et. al. (Hgg.): Human Systems Engineering and Design II. IHSED 2019. Advances in Intelligent Systems and Computing (=Advances in Intelligent Systems and Computing 1026), Cham, S. 795–800.' van: 'Nikolenko A, Hinrichsen S. Potential of Industrial Image Processing in Manual Assembly. In: Ahram T, Karwowski W, Pickl S, Taiar R, editors. Human Systems Engineering and Design II IHSED 2019 Advances in Intelligent Systems and Computing. Cham: Springer Nature; 2019. p. 795–800. (Advances in Intelligent Systems and Computing; vol. 1026).' conference: end_date: 2019-09-18 location: Universität der Bundeswehr, München name: '2nd International Conference on Human Systems Engineering and Design (IHSED2019): Future Trends and Applications' start_date: 2019-09-16 date_created: 2019-09-10T05:52:02Z date_updated: 2023-03-15T13:49:37Z department: - _id: DEP7020 - _id: DEP1305 doi: https://doi.org/10.1007/978-3-030-27928-8_121 editor: - first_name: T. full_name: Ahram, T. last_name: Ahram - first_name: W. full_name: Karwowski, W. last_name: Karwowski - first_name: S. full_name: Pickl, S. last_name: Pickl - first_name: R. full_name: Taiar, R. last_name: Taiar intvolume: ' 1026' keyword: - Industrial image processing - Manual assembly - Assistance systems - Machine vision language: - iso: eng page: 795-800 place: Cham publication: Human Systems Engineering and Design II. IHSED 2019. Advances in Intelligent Systems and Computing publication_identifier: eisbn: - 978-3-030-27928-8 isbn: - 978-3-030-27927-1 publication_status: published publisher: Springer Nature quality_controlled: '1' series_title: Advances in Intelligent Systems and Computing status: public title: Potential of Industrial Image Processing in Manual Assembly type: conference user_id: '74004' volume: 1026 year: 2019 ... --- _id: '699' author: - first_name: Maximilian full_name: Warwitz, Maximilian id: '60924' last_name: Warwitz citation: ama: 'Warwitz M. Workflow zur Erstellung von 3D-Assets für Computer- und Videospiele. Lemgo: Hochschule Ostwestfalen-Lippe; 2018.' apa: 'Warwitz, M. (2018). Workflow zur Erstellung von 3D-Assets für Computer- und Videospiele. Lemgo: Hochschule Ostwestfalen-Lippe.' bjps: 'Warwitz M (2018) Workflow zur Erstellung von 3D-Assets für Computer- und Videospiele. Lemgo: Hochschule Ostwestfalen-Lippe.' chicago: 'Warwitz, Maximilian. Workflow zur Erstellung von 3D-Assets für Computer- und Videospiele. Lemgo: Hochschule Ostwestfalen-Lippe, 2018.' chicago-de: 'Warwitz, Maximilian. 2018. Workflow zur Erstellung von 3D-Assets für Computer- und Videospiele. Lemgo: Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Warwitz, Maximilian: Workflow zur Erstellung von 3D-Assets für Computer- und Videospiele. Lemgo : Hochschule Ostwestfalen-Lippe, 2018' havard: M. Warwitz, Workflow zur Erstellung von 3D-Assets für Computer- und Videospiele, Hochschule Ostwestfalen-Lippe, Lemgo, 2018. ieee: 'M. Warwitz, Workflow zur Erstellung von 3D-Assets für Computer- und Videospiele. Lemgo: Hochschule Ostwestfalen-Lippe, 2018.' mla: Warwitz, Maximilian. Workflow zur Erstellung von 3D-Assets für Computer- und Videospiele. Hochschule Ostwestfalen-Lippe, 2018. short: M. Warwitz, Workflow zur Erstellung von 3D-Assets für Computer- und Videospiele, Hochschule Ostwestfalen-Lippe, Lemgo, 2018. ufg: 'Warwitz, Maximilian (2018): Workflow zur Erstellung von 3D-Assets für Computer- und Videospiele, Lemgo.' van: 'Warwitz M. Workflow zur Erstellung von 3D-Assets für Computer- und Videospiele. Lemgo: Hochschule Ostwestfalen-Lippe; 2018. 93 p.' date_created: 2019-03-12T11:56:00Z date_updated: 2023-03-15T13:50:08Z ddc: - '600' department: - _id: DEP2001 file: - access_level: closed content_type: application/pdf creator: czr-e2t date_created: 2019-03-12T11:59:33Z date_updated: 2019-03-18T12:51:15Z file_id: '700' file_name: Bachelorarbeit_Maximilian Warwitz_Matr.Nr.15331014.pdf file_size: 21246075 relation: main_file file_date_updated: 2019-03-18T12:51:15Z has_accepted_license: '1' keyword: - Game Design - 3D-Asset - Workflow - Videospiel - Computerspiel language: - iso: ger page: '93' place: Lemgo publication_status: published publisher: Hochschule Ostwestfalen-Lippe status: public supervisor: - first_name: Marietta full_name: Ehret, Marietta id: '1201' last_name: Ehret title: Workflow zur Erstellung von 3D-Assets für Computer- und Videospiele type: bachelor_thesis user_id: '74004' year: 2018 ... --- _id: '705' author: - first_name: Manuela full_name: Schrewe, Manuela id: '55575' last_name: Schrewe citation: ama: 'Schrewe M. IJÓMA – Die Erstellung eines Spielekonzepts in den Produktionsschritten Concept Art | Character Design | Level- \& Gameplay Design 3D Modeling | Umsetzung in Unreal Engine 4. Lemgo: Hochschule Ostwestfalen-Lippe; 2018.' apa: 'Schrewe, M. (2018). IJÓMA – Die Erstellung eines Spielekonzepts in den Produktionsschritten Concept Art | Character Design | Level- \& Gameplay Design 3D Modeling | Umsetzung in Unreal Engine 4. Lemgo: Hochschule Ostwestfalen-Lippe.' bjps: 'Schrewe M (2018) IJÓMA – Die Erstellung eines Spielekonzepts in den Produktionsschritten Concept Art | Character Design | Level- \& Gameplay Design 3D Modeling | Umsetzung in Unreal Engine 4. Lemgo: Hochschule Ostwestfalen-Lippe.' chicago: 'Schrewe, Manuela. IJÓMA – Die Erstellung eines Spielekonzepts in den Produktionsschritten Concept Art | Character Design | Level- \& Gameplay Design 3D Modeling | Umsetzung in Unreal Engine 4. Lemgo: Hochschule Ostwestfalen-Lippe, 2018.' chicago-de: 'Schrewe, Manuela. 2018. IJÓMA – Die Erstellung eines Spielekonzepts in den Produktionsschritten Concept Art | Character Design | Level- \& Gameplay Design 3D Modeling | Umsetzung in Unreal Engine 4. Lemgo: Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Schrewe, Manuela: IJÓMA – Die Erstellung eines Spielekonzepts in den Produktionsschritten Concept Art | Character Design | Level- \& Gameplay Design 3D Modeling | Umsetzung in Unreal Engine 4. Lemgo : Hochschule Ostwestfalen-Lippe, 2018' havard: M. Schrewe, IJÓMA – Die Erstellung eines Spielekonzepts in den Produktionsschritten Concept Art | Character Design | Level- \& Gameplay Design 3D Modeling | Umsetzung in Unreal Engine 4, Hochschule Ostwestfalen-Lippe, Lemgo, 2018. ieee: 'M. Schrewe, IJÓMA – Die Erstellung eines Spielekonzepts in den Produktionsschritten Concept Art | Character Design | Level- \& Gameplay Design 3D Modeling | Umsetzung in Unreal Engine 4. Lemgo: Hochschule Ostwestfalen-Lippe, 2018.' mla: Schrewe, Manuela. IJÓMA – Die Erstellung eines Spielekonzepts in den Produktionsschritten Concept Art | Character Design | Level- \& Gameplay Design 3D Modeling | Umsetzung in Unreal Engine 4. Hochschule Ostwestfalen-Lippe, 2018. short: M. Schrewe, IJÓMA – Die Erstellung eines Spielekonzepts in den Produktionsschritten Concept Art | Character Design | Level- \& Gameplay Design 3D Modeling | Umsetzung in Unreal Engine 4, Hochschule Ostwestfalen-Lippe, Lemgo, 2018. ufg: 'Schrewe, Manuela (2018): IJÓMA – Die Erstellung eines Spielekonzepts in den Produktionsschritten Concept Art | Character Design | Level- \& Gameplay Design 3D Modeling | Umsetzung in Unreal Engine 4, Lemgo.' van: 'Schrewe M. IJÓMA – Die Erstellung eines Spielekonzepts in den Produktionsschritten Concept Art | Character Design | Level- \& Gameplay Design 3D Modeling | Umsetzung in Unreal Engine 4. Lemgo: Hochschule Ostwestfalen-Lippe; 2018. 81 p.' date_created: 2019-03-12T12:15:56Z date_updated: 2023-03-15T13:50:09Z ddc: - '770' department: - _id: DEP2001 file: - access_level: closed content_type: application/pdf creator: czr-e2t date_created: 2019-03-12T12:17:40Z date_updated: 2019-03-18T13:13:11Z file_id: '706' file_name: IJÓMA_BA_Ausarbeitung_Schrewe.pdf file_size: 12589200 relation: main_file file_date_updated: 2019-03-18T13:13:11Z has_accepted_license: '1' keyword: - 3D Modeling - Character Design - Concept Art - Spiel - Unreal Engine 4 language: - iso: ger page: '81' place: Lemgo publication_status: published publisher: Hochschule Ostwestfalen-Lippe status: public supervisor: - first_name: Peter full_name: Kaboth, Peter id: '11179' last_name: Kaboth - first_name: Martin full_name: Engeleit, Martin id: '51995' last_name: Engeleit title: IJÓMA – Die Erstellung eines Spielekonzepts in den Produktionsschritten Concept Art | Character Design | Level- \& Gameplay Design 3D Modeling | Umsetzung in Unreal Engine 4 type: bachelor_thesis user_id: '74004' year: 2018 ... --- _id: '917' author: - first_name: Sonja full_name: Liesen, Sonja id: '56839' last_name: Liesen citation: ama: 'Liesen S. Marketingkonzept und 3D-Visualisierung für Produktinnovationen am Beispiel eines multifunktionalen Taschensystems. Lemgo: Hochschule Ostwestfalen-Lippe; 2018.' apa: 'Liesen, S. (2018). Marketingkonzept und 3D-Visualisierung für Produktinnovationen am Beispiel eines multifunktionalen Taschensystems. Lemgo: Hochschule Ostwestfalen-Lippe.' bjps: 'Liesen S (2018) Marketingkonzept und 3D-Visualisierung für Produktinnovationen am Beispiel eines multifunktionalen Taschensystems. Lemgo: Hochschule Ostwestfalen-Lippe.' chicago: 'Liesen, Sonja. Marketingkonzept und 3D-Visualisierung für Produktinnovationen am Beispiel eines multifunktionalen Taschensystems. Lemgo: Hochschule Ostwestfalen-Lippe, 2018.' chicago-de: 'Liesen, Sonja. 2018. Marketingkonzept und 3D-Visualisierung für Produktinnovationen am Beispiel eines multifunktionalen Taschensystems. Lemgo: Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Liesen, Sonja: Marketingkonzept und 3D-Visualisierung für Produktinnovationen am Beispiel eines multifunktionalen Taschensystems. Lemgo : Hochschule Ostwestfalen-Lippe, 2018' havard: S. Liesen, Marketingkonzept und 3D-Visualisierung für Produktinnovationen am Beispiel eines multifunktionalen Taschensystems, Hochschule Ostwestfalen-Lippe, Lemgo, 2018. ieee: 'S. Liesen, Marketingkonzept und 3D-Visualisierung für Produktinnovationen am Beispiel eines multifunktionalen Taschensystems. Lemgo: Hochschule Ostwestfalen-Lippe, 2018.' mla: Liesen, Sonja. Marketingkonzept und 3D-Visualisierung für Produktinnovationen am Beispiel eines multifunktionalen Taschensystems. Hochschule Ostwestfalen-Lippe, 2018. short: S. Liesen, Marketingkonzept und 3D-Visualisierung für Produktinnovationen am Beispiel eines multifunktionalen Taschensystems, Hochschule Ostwestfalen-Lippe, Lemgo, 2018. ufg: 'Liesen, Sonja (2018): Marketingkonzept und 3D-Visualisierung für Produktinnovationen am Beispiel eines multifunktionalen Taschensystems, Lemgo.' van: 'Liesen S. Marketingkonzept und 3D-Visualisierung für Produktinnovationen am Beispiel eines multifunktionalen Taschensystems. Lemgo: Hochschule Ostwestfalen-Lippe; 2018. 104 p.' date_created: 2019-04-09T10:46:45Z date_updated: 2023-03-15T13:50:17Z ddc: - '770' department: - _id: DEP2001 file: - access_level: closed content_type: application/pdf creator: 6bl-f5s date_created: 2019-04-09T10:46:14Z date_updated: 2019-04-09T10:46:14Z file_id: '918' file_name: Bachelorarbeit-SonjaLiesen.pdf file_size: 22620655 relation: main_file file_date_updated: 2019-04-09T10:46:14Z has_accepted_license: '1' keyword: - 3D-Visualisierung - Marketingkonzept language: - iso: ger page: '104' place: Lemgo publication_status: published publisher: Hochschule Ostwestfalen-Lippe status: public supervisor: - first_name: Peter full_name: Kaboth, Peter id: '11179' last_name: Kaboth - first_name: Martin full_name: Engeleit, Martin id: '51995' last_name: Engeleit title: Marketingkonzept und 3D-Visualisierung für Produktinnovationen am Beispiel eines multifunktionalen Taschensystems type: bachelor_thesis user_id: '45673' year: 2018 ... --- _id: '919' author: - first_name: Marion full_name: Finger, Marion id: '60270' last_name: Finger citation: ama: 'Finger M. Die Wirtschaftlichkeit des 3D-Drucks im Bereich der Backwarenpräsentation. Lemgo: Hochschule Ostwestfalen-Lippe; 2018.' apa: 'Finger, M. (2018). Die Wirtschaftlichkeit des 3D-Drucks im Bereich der Backwarenpräsentation. Lemgo: Hochschule Ostwestfalen-Lippe.' bjps: 'Finger M (2018) Die Wirtschaftlichkeit des 3D-Drucks im Bereich der Backwarenpräsentation. Lemgo: Hochschule Ostwestfalen-Lippe.' chicago: 'Finger, Marion. Die Wirtschaftlichkeit des 3D-Drucks im Bereich der Backwarenpräsentation. Lemgo: Hochschule Ostwestfalen-Lippe, 2018.' chicago-de: 'Finger, Marion. 2018. Die Wirtschaftlichkeit des 3D-Drucks im Bereich der Backwarenpräsentation. Lemgo: Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Finger, Marion: Die Wirtschaftlichkeit des 3D-Drucks im Bereich der Backwarenpräsentation. Lemgo : Hochschule Ostwestfalen-Lippe, 2018' havard: M. Finger, Die Wirtschaftlichkeit des 3D-Drucks im Bereich der Backwarenpräsentation, Hochschule Ostwestfalen-Lippe, Lemgo, 2018. ieee: 'M. Finger, Die Wirtschaftlichkeit des 3D-Drucks im Bereich der Backwarenpräsentation. Lemgo: Hochschule Ostwestfalen-Lippe, 2018.' mla: Finger, Marion. Die Wirtschaftlichkeit des 3D-Drucks im Bereich der Backwarenpräsentation. Hochschule Ostwestfalen-Lippe, 2018. short: M. Finger, Die Wirtschaftlichkeit des 3D-Drucks im Bereich der Backwarenpräsentation, Hochschule Ostwestfalen-Lippe, Lemgo, 2018. ufg: 'Finger, Marion (2018): Die Wirtschaftlichkeit des 3D-Drucks im Bereich der Backwarenpräsentation, Lemgo.' van: 'Finger M. Die Wirtschaftlichkeit des 3D-Drucks im Bereich der Backwarenpräsentation. Lemgo: Hochschule Ostwestfalen-Lippe; 2018. 64 p.' date_created: 2019-04-09T10:50:00Z date_updated: 2023-03-15T13:50:17Z ddc: - '770' department: - _id: DEP2001 file: - access_level: closed content_type: application/pdf creator: 6bl-f5s date_created: 2019-04-09T10:49:28Z date_updated: 2019-04-09T10:49:28Z file_id: '920' file_name: Die Wirtschaftlichkeit des 3D-Drucks im Bereich der Backwarenpräsentation Finale für Opus.pdf file_size: 2761523 relation: main_file file_date_updated: 2019-04-09T10:49:28Z has_accepted_license: '1' keyword: - 3D-Druck - CG Modelling - Computergrafik - Warenpräsentation language: - iso: ger page: '64' place: Lemgo publication_status: published publisher: Hochschule Ostwestfalen-Lippe status: public supervisor: - first_name: Marietta full_name: Ehret, Marietta id: '1201' last_name: Ehret title: Die Wirtschaftlichkeit des 3D-Drucks im Bereich der Backwarenpräsentation type: bachelor_thesis user_id: '45673' year: 2018 ... --- _id: '1009' author: - first_name: Tabea full_name: Beyer, Tabea id: '57458' last_name: Beyer citation: ama: 'Beyer T. Visualisierung chemischer Prozesse - Filmisch erklären 3D-Animationsfilm über das Verfahren der Wasseraufbereitung der Firma Fermanox. Lemgo: Hochschule Ostwestfalen-Lippe; 2018.' apa: 'Beyer, T. (2018). Visualisierung chemischer Prozesse - Filmisch erklären 3D-Animationsfilm über das Verfahren der Wasseraufbereitung der Firma Fermanox. Lemgo: Hochschule Ostwestfalen-Lippe.' bjps: 'Beyer T (2018) Visualisierung chemischer Prozesse - Filmisch erklären 3D-Animationsfilm über das Verfahren der Wasseraufbereitung der Firma Fermanox. Lemgo: Hochschule Ostwestfalen-Lippe.' chicago: 'Beyer, Tabea. Visualisierung chemischer Prozesse - Filmisch erklären 3D-Animationsfilm über das Verfahren der Wasseraufbereitung der Firma Fermanox. Lemgo: Hochschule Ostwestfalen-Lippe, 2018.' chicago-de: 'Beyer, Tabea. 2018. Visualisierung chemischer Prozesse - Filmisch erklären 3D-Animationsfilm über das Verfahren der Wasseraufbereitung der Firma Fermanox. Lemgo: Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Beyer, Tabea: Visualisierung chemischer Prozesse - Filmisch erklären 3D-Animationsfilm über das Verfahren der Wasseraufbereitung der Firma Fermanox. Lemgo : Hochschule Ostwestfalen-Lippe, 2018' havard: T. Beyer, Visualisierung chemischer Prozesse - Filmisch erklären 3D-Animationsfilm über das Verfahren der Wasseraufbereitung der Firma Fermanox, Hochschule Ostwestfalen-Lippe, Lemgo, 2018. ieee: 'T. Beyer, Visualisierung chemischer Prozesse - Filmisch erklären 3D-Animationsfilm über das Verfahren der Wasseraufbereitung der Firma Fermanox. Lemgo: Hochschule Ostwestfalen-Lippe, 2018.' mla: Beyer, Tabea. Visualisierung chemischer Prozesse - Filmisch erklären 3D-Animationsfilm über das Verfahren der Wasseraufbereitung der Firma Fermanox. Hochschule Ostwestfalen-Lippe, 2018. short: T. Beyer, Visualisierung chemischer Prozesse - Filmisch erklären 3D-Animationsfilm über das Verfahren der Wasseraufbereitung der Firma Fermanox, Hochschule Ostwestfalen-Lippe, Lemgo, 2018. ufg: 'Beyer, Tabea (2018): Visualisierung chemischer Prozesse - Filmisch erklären 3D-Animationsfilm über das Verfahren der Wasseraufbereitung der Firma Fermanox, Lemgo.' van: 'Beyer T. Visualisierung chemischer Prozesse - Filmisch erklären 3D-Animationsfilm über das Verfahren der Wasseraufbereitung der Firma Fermanox. Lemgo: Hochschule Ostwestfalen-Lippe; 2018. 36 p.' date_created: 2019-04-15T10:17:40Z date_updated: 2023-03-15T13:49:34Z ddc: - '650' department: - _id: DEP2001 file: - access_level: closed content_type: application/pdf creator: czr-e2t date_created: 2019-04-15T10:20:19Z date_updated: 2019-04-15T10:20:19Z file_id: '1010' file_name: BA_Beyer_Tabea_15318092.pdf file_size: 3507392 relation: main_file file_date_updated: 2019-04-15T10:20:19Z has_accepted_license: '1' keyword: - 3d Animationsfilm - Wasseraufbereitung language: - iso: ger page: '36' place: Lemgo publication_status: published publisher: Hochschule Ostwestfalen-Lippe status: public supervisor: - first_name: Marietta full_name: Ehret, Marietta id: '1201' last_name: Ehret - first_name: Guido full_name: Falkemeier, Guido id: '29084' last_name: Falkemeier title: Visualisierung chemischer Prozesse - Filmisch erklären 3D-Animationsfilm über das Verfahren der Wasseraufbereitung der Firma Fermanox type: bachelor_thesis user_id: '74004' year: 2018 ... --- _id: '796' author: - first_name: Jasper full_name: Kelm, Jasper id: '56859' last_name: Kelm citation: ama: 'Kelm J. 3D-Tracking : Gegenüberstellung verschiedener Implementierungen in Labor- und Praxisanwendung. Lemgo: Hochschule Ostwestfalen-Lippe; 2017.' apa: 'Kelm, J. (2017). 3D-Tracking : Gegenüberstellung verschiedener Implementierungen in Labor- und Praxisanwendung. Lemgo: Hochschule Ostwestfalen-Lippe.' bjps: 'Kelm J (2017) 3D-Tracking : Gegenüberstellung verschiedener Implementierungen in Labor- und Praxisanwendung. Lemgo: Hochschule Ostwestfalen-Lippe.' chicago: 'Kelm, Jasper. 3D-Tracking : Gegenüberstellung verschiedener Implementierungen in Labor- und Praxisanwendung. Lemgo: Hochschule Ostwestfalen-Lippe, 2017.' chicago-de: 'Kelm, Jasper. 2017. 3D-Tracking : Gegenüberstellung verschiedener Implementierungen in Labor- und Praxisanwendung. Lemgo: Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Kelm, Jasper: 3D-Tracking : Gegenüberstellung verschiedener Implementierungen in Labor- und Praxisanwendung. Lemgo : Hochschule Ostwestfalen-Lippe, 2017' havard: 'J. Kelm, 3D-Tracking : Gegenüberstellung verschiedener Implementierungen in Labor- und Praxisanwendung, Hochschule Ostwestfalen-Lippe, Lemgo, 2017.' ieee: 'J. Kelm, 3D-Tracking : Gegenüberstellung verschiedener Implementierungen in Labor- und Praxisanwendung. Lemgo: Hochschule Ostwestfalen-Lippe, 2017.' mla: 'Kelm, Jasper. 3D-Tracking : Gegenüberstellung verschiedener Implementierungen in Labor- und Praxisanwendung. Hochschule Ostwestfalen-Lippe, 2017.' short: 'J. Kelm, 3D-Tracking : Gegenüberstellung verschiedener Implementierungen in Labor- und Praxisanwendung, Hochschule Ostwestfalen-Lippe, Lemgo, 2017.' ufg: 'Kelm, Jasper (2017): 3D-Tracking : Gegenüberstellung verschiedener Implementierungen in Labor- und Praxisanwendung, Lemgo.' van: 'Kelm J. 3D-Tracking : Gegenüberstellung verschiedener Implementierungen in Labor- und Praxisanwendung. Lemgo: Hochschule Ostwestfalen-Lippe; 2017. 89 p.' date_created: 2019-03-21T14:20:11Z date_updated: 2023-03-15T13:50:12Z ddc: - '770' department: - _id: DEP2001 file: - access_level: closed content_type: application/pdf creator: 6bl-f5s date_created: 2019-03-21T14:18:34Z date_updated: 2019-03-25T08:29:15Z file_id: '797' file_name: BA_Kelm_Jasper_3D-Tracking.pdf file_size: 6578368 relation: main_file file_date_updated: 2019-03-25T08:29:15Z has_accepted_license: '1' keyword: - 2D-Tracking - 3D-Tracking - Integration - Kamera - Rekonstruktion language: - iso: ger page: '89' place: Lemgo publication_status: published publisher: Hochschule Ostwestfalen-Lippe status: public supervisor: - first_name: Guido full_name: Falkemeier, Guido id: '29084' last_name: Falkemeier - first_name: Jan full_name: Pieniak, Jan id: '49037' last_name: Pieniak title: '3D-Tracking : Gegenüberstellung verschiedener Implementierungen in Labor- und Praxisanwendung' type: bachelor_thesis user_id: '45673' year: 2017 ... --- _id: '798' author: - first_name: Melina full_name: Führer, Melina id: '54971' last_name: Führer citation: ama: 'Führer M. Methoden und Möglichkeiten fotorealistischer Visualisierung zur Produktpräsentation. Lemgo: Hochschule Ostwestfalen-Lippe; 2017.' apa: 'Führer, M. (2017). Methoden und Möglichkeiten fotorealistischer Visualisierung zur Produktpräsentation. Lemgo: Hochschule Ostwestfalen-Lippe.' bjps: 'Führer M (2017) Methoden und Möglichkeiten fotorealistischer Visualisierung zur Produktpräsentation. Lemgo: Hochschule Ostwestfalen-Lippe.' chicago: 'Führer, Melina. Methoden und Möglichkeiten fotorealistischer Visualisierung zur Produktpräsentation. Lemgo: Hochschule Ostwestfalen-Lippe, 2017.' chicago-de: 'Führer, Melina. 2017. Methoden und Möglichkeiten fotorealistischer Visualisierung zur Produktpräsentation. Lemgo: Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Führer, Melina: Methoden und Möglichkeiten fotorealistischer Visualisierung zur Produktpräsentation. Lemgo : Hochschule Ostwestfalen-Lippe, 2017' havard: M. Führer, Methoden und Möglichkeiten fotorealistischer Visualisierung zur Produktpräsentation, Hochschule Ostwestfalen-Lippe, Lemgo, 2017. ieee: 'M. Führer, Methoden und Möglichkeiten fotorealistischer Visualisierung zur Produktpräsentation. Lemgo: Hochschule Ostwestfalen-Lippe, 2017.' mla: Führer, Melina. Methoden und Möglichkeiten fotorealistischer Visualisierung zur Produktpräsentation. Hochschule Ostwestfalen-Lippe, 2017. short: M. Führer, Methoden und Möglichkeiten fotorealistischer Visualisierung zur Produktpräsentation, Hochschule Ostwestfalen-Lippe, Lemgo, 2017. ufg: 'Führer, Melina (2017): Methoden und Möglichkeiten fotorealistischer Visualisierung zur Produktpräsentation, Lemgo.' van: 'Führer M. Methoden und Möglichkeiten fotorealistischer Visualisierung zur Produktpräsentation. Lemgo: Hochschule Ostwestfalen-Lippe; 2017. 51 p.' date_created: 2019-03-21T14:23:27Z date_updated: 2023-03-15T13:50:13Z ddc: - '770' department: - _id: DEP2001 file: - access_level: closed content_type: application/pdf creator: 6bl-f5s date_created: 2019-03-21T14:22:04Z date_updated: 2019-03-25T08:28:40Z file_id: '799' file_name: Bachelorarbeit_komp.pdf file_size: 3666134 relation: main_file file_date_updated: 2019-03-25T08:28:40Z has_accepted_license: '1' keyword: - 3D language: - iso: ger page: '51' place: Lemgo publication_status: published publisher: Hochschule Ostwestfalen-Lippe status: public supervisor: - first_name: Marietta full_name: Ehret, Marietta id: '1201' last_name: Ehret title: Methoden und Möglichkeiten fotorealistischer Visualisierung zur Produktpräsentation type: bachelor_thesis user_id: '45673' year: 2017 ... --- _id: '834' abstract: - lang: ger text: Erstellung von zwei Designansätzen (abstrakt und realistisch) bezüglich eines menschlichen Gesichtes als 3D-Grafik in Rücksichtnahme auf das "Uncanny Valley". author: - first_name: Leslie full_name: Hunter Blench, Leslie last_name: Hunter Blench citation: ama: 'Hunter Blench L. Uncanny Valley : Die Auswirkung von Abstraktion Und Ikonizität Hinsichtlich Der Glaubwürdigkeit Einer Computergenerierten Person. Lemgo: Hochschule Ostwestfalen-Lippe; 2017.' apa: 'Hunter Blench, L. (2017). Uncanny Valley : Die Auswirkung von Abstraktion und Ikonizität hinsichtlich der Glaubwürdigkeit einer computergenerierten Person. Lemgo: Hochschule Ostwestfalen-Lippe.' bjps: 'Hunter Blench L (2017) Uncanny Valley : Die Auswirkung von Abstraktion Und Ikonizität Hinsichtlich Der Glaubwürdigkeit Einer Computergenerierten Person. Lemgo: Hochschule Ostwestfalen-Lippe.' chicago: 'Hunter Blench, Leslie. Uncanny Valley : Die Auswirkung von Abstraktion Und Ikonizität Hinsichtlich Der Glaubwürdigkeit Einer Computergenerierten Person. Lemgo: Hochschule Ostwestfalen-Lippe, 2017.' chicago-de: 'Hunter Blench, Leslie. 2017. Uncanny Valley : Die Auswirkung von Abstraktion und Ikonizität hinsichtlich der Glaubwürdigkeit einer computergenerierten Person. Lemgo: Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Hunter Blench, Leslie: Uncanny Valley : Die Auswirkung von Abstraktion und Ikonizität hinsichtlich der Glaubwürdigkeit einer computergenerierten Person. Lemgo : Hochschule Ostwestfalen-Lippe, 2017' havard: 'L. Hunter Blench, Uncanny Valley : Die Auswirkung von Abstraktion und Ikonizität hinsichtlich der Glaubwürdigkeit einer computergenerierten Person, Hochschule Ostwestfalen-Lippe, Lemgo, 2017.' ieee: 'L. Hunter Blench, Uncanny Valley : Die Auswirkung von Abstraktion und Ikonizität hinsichtlich der Glaubwürdigkeit einer computergenerierten Person. Lemgo: Hochschule Ostwestfalen-Lippe, 2017.' mla: 'Hunter Blench, Leslie. Uncanny Valley : Die Auswirkung von Abstraktion Und Ikonizität Hinsichtlich Der Glaubwürdigkeit Einer Computergenerierten Person. Hochschule Ostwestfalen-Lippe, 2017.' short: 'L. Hunter Blench, Uncanny Valley : Die Auswirkung von Abstraktion Und Ikonizität Hinsichtlich Der Glaubwürdigkeit Einer Computergenerierten Person, Hochschule Ostwestfalen-Lippe, Lemgo, 2017.' ufg: 'Hunter Blench, Leslie (2017): Uncanny Valley : Die Auswirkung von Abstraktion und Ikonizität hinsichtlich der Glaubwürdigkeit einer computergenerierten Person, Lemgo.' van: 'Hunter Blench L. Uncanny Valley : Die Auswirkung von Abstraktion und Ikonizität hinsichtlich der Glaubwürdigkeit einer computergenerierten Person. Lemgo: Hochschule Ostwestfalen-Lippe; 2017. 36 p.' date_created: 2019-04-08T07:38:33Z date_updated: 2023-03-15T13:50:14Z ddc: - '790' department: - _id: DEP2001 file: - access_level: closed content_type: application/pdf creator: hemke date_created: 2019-04-08T07:44:55Z date_updated: 2019-04-08T08:07:06Z file_id: '839' file_name: 15294084_Blench.pdf file_size: 5006975 relation: main_file file_date_updated: 2019-04-08T08:07:06Z has_accepted_license: '1' keyword: - Uncanny Valley - 3D - Digitales Kino - Effekte - Stereoskopischer Film language: - iso: eng page: '36' place: Lemgo publisher: Hochschule Ostwestfalen-Lippe status: public supervisor: - first_name: Peter full_name: Kaboth, Peter id: '11179' last_name: Kaboth - first_name: Marietta full_name: Ehret, Marietta id: '1201' last_name: Ehret title: 'Uncanny Valley : Die Auswirkung von Abstraktion und Ikonizität hinsichtlich der Glaubwürdigkeit einer computergenerierten Person' type: bachelor_thesis user_id: '15514' year: 2017 ... --- _id: '2022' abstract: - lang: eng text: 'Nowadays, the boost of optical imaging technologies results in more data with a faster rate are being collected. Consequently, data and knowledge discovery science has become an attractive and a fast growing topic in several industry and research area. Motif discovery in image processing aims to tackle the problem of deriving structures or detecting regularities in image databases. Most of the motif discovery methods first convert images into time series and then attempt to find motifs in such data. This might lead to information loss and also the problem of inability to detect shifted and multi-scale image motifs of different size. Here, a method is proposed to find image motifs of different size in image datasets by applying images in original dimension without converting them to time series. Images are inspected by the Complex Quad Tree Wavelet Packet transform which provides broad frequency analysis of an image in various scales. Next, features are extracted from the wavelet coefficients. Finally, image motifs are detected by measuring the similarity of the features. The performance of the proposed method is demonstrated on a dataset with images from diverse applications, such as hand gesture, text recognition, leaf and plant identification, etc. ' author: - first_name: Sahar full_name: Deppe, Sahar id: '52121' last_name: Deppe - first_name: Volker full_name: Lohweg, Volker id: '1804' last_name: Lohweg orcid: 0000-0002-3325-7887 citation: ama: 'Deppe S, Lohweg V. Shift-Invariant Motif Discovery in Image Processing “Best Paper Award.” In: Leister W, ed. PESARO 2017 The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications. PESARO 2017; Venice, Italy  : The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications; Special track MAIS: Machine Learning Algorithms in Image and Signal Processing; 2017:27-32.' apa: 'Deppe, S., & Lohweg, V. (2017). Shift-Invariant Motif Discovery in Image Processing “Best Paper Award.” In W. Leister (Ed.), PESARO 2017 The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications (pp. 27–32). PESARO 2017; Venice, Italy  : The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications; Special track MAIS: Machine Learning Algorithms in Image and Signal Processing.' bjps: 'Deppe S and Lohweg V (2017) Shift-Invariant Motif Discovery in Image Processing ‘Best Paper Award’. In Leister W (ed.), PESARO 2017 The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications. PESARO 2017; Venice, Italy  : The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications; Special track MAIS: Machine Learning Algorithms in Image and Signal Processing, pp. 27–32.' chicago: 'Deppe, Sahar, and Volker Lohweg. “Shift-Invariant Motif Discovery in Image Processing ‘Best Paper Award.’” In PESARO 2017 The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications, edited by Wolfgang Leister, 27–32. PESARO 2017; Venice, Italy  : The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications; Special track MAIS: Machine Learning Algorithms in Image and Signal Processing, 2017.' chicago-de: 'Deppe, Sahar und Volker Lohweg. 2017. Shift-Invariant Motif Discovery in Image Processing „Best Paper Award“. In: PESARO 2017 The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications, hg. von Wolfgang Leister, 27–32. PESARO 2017; Venice, Italy  : The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications; Special track MAIS: Machine Learning Algorithms in Image and Signal Processing.' din1505-2-1: 'Deppe, Sahar ; Lohweg, Volker: Shift-Invariant Motif Discovery in Image Processing „Best Paper Award“. In: Leister, W. (Hrsg.): PESARO 2017 The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications. PESARO 2017; Venice, Italy   : The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications; Special track MAIS: Machine Learning Algorithms in Image and Signal Processing, 2017, S. 27–32' havard: 'S. Deppe, V. Lohweg, Shift-Invariant Motif Discovery in Image Processing “Best Paper Award,” in: W. Leister (Ed.), PESARO 2017 The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications, The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications; Special track MAIS: Machine Learning Algorithms in Image and Signal Processing, PESARO 2017; Venice, Italy  , 2017: pp. 27–32.' ieee: S. Deppe and V. Lohweg, “Shift-Invariant Motif Discovery in Image Processing ‘Best Paper Award,’” in PESARO 2017 The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications, Venice, Italy , 2017, pp. 27–32. mla: 'Deppe, Sahar, and Volker Lohweg. “Shift-Invariant Motif Discovery in Image Processing ‘Best Paper Award.’” PESARO 2017 The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications, edited by Wolfgang Leister, The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications; Special track MAIS: Machine Learning Algorithms in Image and Signal Processing, 2017, pp. 27–32.' short: 'S. Deppe, V. Lohweg, in: W. Leister (Ed.), PESARO 2017 The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications, The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications; Special track MAIS: Machine Learning Algorithms in Image and Signal Processing, PESARO 2017; Venice, Italy  , 2017, pp. 27–32.' ufg: 'Deppe, Sahar/Lohweg, Volker (2017): Shift-Invariant Motif Discovery in Image Processing „Best Paper Award“, in: Wolfgang Leister (Hg.): PESARO 2017 The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications, PESARO 2017; Venice, Italy  , S. 27–32.' van: 'Deppe S, Lohweg V. Shift-Invariant Motif Discovery in Image Processing “Best Paper Award.” In: Leister W, editor. PESARO 2017 The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications. PESARO 2017; Venice, Italy  : The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications; Special track MAIS: Machine Learning Algorithms in Image and Signal Processing; 2017. p. 27–32.' conference: end_date: 2017-04-27 location: 'Venice, Italy ' name: 7. International Conference on Performance (PESARO 2017) start_date: 2017-04-23 date_created: 2019-11-25T09:06:50Z date_updated: 2023-03-15T13:49:38Z department: - _id: DEP5023 editor: - first_name: Wolfgang full_name: Leister, Wolfgang last_name: Leister keyword: - Motif discovery - Image processing - Wavelet transformation language: - iso: eng main_file_link: - open_access: '1' url: http://www.thinkmind.org/index.php?view=instance&instance=PESARO+2017 oa: '1' page: 27-32 place: 'PESARO 2017; Venice, Italy ' publication: PESARO 2017 The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications publication_identifier: eisbn: - 978-1-61208-549-4 eissn: - 2308-3700 publication_status: published publisher: 'The Seventh International Conference on Performance, Safety and Robustness in Complex Systems and Applications; Special track MAIS: Machine Learning Algorithms in Image and Signal Processing' status: public title: Shift-Invariant Motif Discovery in Image Processing 'Best Paper Award' type: conference user_id: '15514' year: 2017 ... --- _id: '585' abstract: - lang: eng text: "Many low-cost 3D printers have been brought to market over the last couple of years. Most of them apply a Fused Layer Manufacturing (FLM) process, and have made 3D printing a great success amongst hobbyists, the maker community and students. One drawback of such inexpensive equipment is a limited build envelope, which prevents this from becoming a significant contributor to industrial production. To overcome these limits, it is not sufficient to simply upscale dimensions, but the overall concept of such machines must be completely re-thought, as well as the concepts behind several building blocks, components and the process software system.\r\nProblems such as shrinkage of build material, support material and machine parts in combination with long printer head travels, temperature distribution and moisture effects all have to be solved. In addition, larger parts need longer process times. Therefore, reduction of process times and an increase in productivity are necessary in order to enable economic production.\r\nSome of these problems can be solved by using more than one printer head for production, by using new materials and inventing new nozzle systems as distinct solutions for big printers. Nevertheless, to solve all these problems, the development of special machines for large parts is necessary: not component-wise but as a whole system. Large parts could then be successfully produced in several industries, using large, inexpensive FLMmachines.\r\n" author: - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer - first_name: Lars full_name: Witte, Lars id: '45920' last_name: Witte citation: ama: 'Villmer F-J, Witte L. Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2015:111-122.' apa: 'Villmer, F.-J., & Witte, L. (2015). Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 111–122). Lemgo.' bjps: 'Villmer F-J and Witte L (2015) Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 111–122.' chicago: 'Villmer, Franz-Josef, and Lars Witte. “Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 111–22. Lemgo, 2015.' chicago-de: 'Villmer, Franz-Josef und Lars Witte. 2015. Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 111–122. Lemgo.' din1505-2-1: 'Villmer, Franz-Josef ; Witte, Lars: Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2015, S. 111–122' havard: 'F.-J. Villmer, L. Witte, Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2015: pp. 111–122.' ieee: 'F.-J. Villmer and L. Witte, “Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself,” in Production Engineering and Management, Trieste, Italy, 2015, no. 1, pp. 111–122.' mla: 'Villmer, Franz-Josef, and Lars Witte. “Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2015, pp. 111–22.' short: 'F.-J. Villmer, L. Witte, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2015, pp. 111–122.' ufg: 'Villmer, Franz-Josef/Witte, Lars (2015): Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 111–122.' van: 'Villmer F-J, Witte L. Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2015. p. 111–22.' conference: end_date: 2015-10-02 location: Trieste, Italy name: Proceedings5th International Conference start_date: 2015-10-01 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T14:42:21Z date_updated: 2023-03-15T13:50:02Z department: - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer issue: '1' keyword: - 3D printing - FLM - build envelope - large-scale - thermoplastic polymers language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf oa: '1' page: 111-122 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-941645-11-0 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf status: public title: 'Large Scale 3D-Printers: The Challenge of Outgrowing Do-It-Yourself' type: conference user_id: '45673' year: 2015 ... --- _id: '599' abstract: - lang: eng text: "Order picking has long been identified as the most labor costly and intensively activity in warehouse management. The orders from the customers need to be fulfilled tightly and timely. In order to keep the required high service level, the warehouse has to increase the picking productivity under the constraints of limited capacity. This paper concerns a man-togoods order picking system, in which the order pickers have to drive with a pallet jack to the storage locations. Considering that the orders are mostly small orders which consist of less lines, it is efficient to combine severalsingle customer orders into one picking order. Under this circumstance, this paper intends to answer the question of how customer orders should be grouped into picking orders with the aim of minimizing the total travel length through the warehouse. Consequently the productivity of the order picking system can be improved. An optimization problem for order batching is introduced. The optimization method of order batching is then proposed. Based on the simulation of different scenarios of incoming orders, it can be concluded that the developed method is effective in improving the productivity of the concerned order picking system.\r\n" author: - first_name: Li full_name: Li, Li id: '58482' last_name: Li - first_name: L. full_name: Schulze, L. last_name: Schulze citation: ama: 'Li L, Schulze L. Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2015:319-326.' apa: Li, L., & Schulze, L. (2015). Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 319–326). Lemgo. bjps: Li L and Schulze L (2015) Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 319–326. chicago: Li, Li, and L. Schulze. “Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 319–26. Lemgo, 2015. chicago-de: 'Li, Li und L. Schulze. 2015. Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 319–326. Lemgo.' din1505-2-1: 'Li, Li ; Schulze, L.: Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2015, S. 319–326' havard: 'L. Li, L. Schulze, Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2015: pp. 319–326.' ieee: L. Li and L. Schulze, “Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching,” in Production Engineering and Management, Trieste, Italy, 2015, no. 1, pp. 319–326. mla: Li, Li, and L. Schulze. “Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2015, pp. 319–26. short: 'L. Li, L. Schulze, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2015, pp. 319–326.' ufg: 'Li, Li/Schulze, L. (2015): Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 319–326.' van: 'Li L, Schulze L. Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2015. p. 319–26.' conference: end_date: 2015-10-02 location: Trieste, Italy name: Proceedings5th International Conference start_date: 2015-10-01 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-19T07:34:56Z date_updated: 2023-03-15T13:50:03Z department: - _id: DEP7000 - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer issue: '1' keyword: - Order picking - man-to-goods - order batching - picking productivity - genetic algorithm language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf oa: '1' page: 319-326 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-941645-11-0 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf status: public title: Improving the Productivity of a Man-to-Goods Order Picking System through Optimization of Order Batching type: conference user_id: '45673' year: 2015 ... --- _id: '1679' author: - first_name: Xenia full_name: Gross, Xenia last_name: Gross citation: ama: 'Gross X. 3D-KURZFILM „THE NIGHT OF SPIDERS AND FOOLS“ . Lemgo: Hochschule Ostwestfalen-Lippe; 2015.' apa: 'Gross, X. (2015). 3D-KURZFILM „THE NIGHT OF SPIDERS AND FOOLS“ . Lemgo: Hochschule Ostwestfalen-Lippe.' bjps: 'Gross X (2015) 3D-KURZFILM „THE NIGHT OF SPIDERS AND FOOLS“ . Lemgo: Hochschule Ostwestfalen-Lippe.' chicago: 'Gross, Xenia. 3D-KURZFILM „THE NIGHT OF SPIDERS AND FOOLS“ . Lemgo: Hochschule Ostwestfalen-Lippe, 2015.' chicago-de: 'Gross, Xenia. 2015. 3D-KURZFILM „THE NIGHT OF SPIDERS AND FOOLS“ . Lemgo: Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Gross, Xenia: 3D-KURZFILM „THE NIGHT OF SPIDERS AND FOOLS“ . Lemgo : Hochschule Ostwestfalen-Lippe, 2015' havard: X. Gross, 3D-KURZFILM „THE NIGHT OF SPIDERS AND FOOLS“ , Hochschule Ostwestfalen-Lippe, Lemgo, 2015. ieee: 'X. Gross, 3D-KURZFILM „THE NIGHT OF SPIDERS AND FOOLS“ . Lemgo: Hochschule Ostwestfalen-Lippe, 2015.' mla: Gross, Xenia. 3D-KURZFILM „THE NIGHT OF SPIDERS AND FOOLS“ . Hochschule Ostwestfalen-Lippe, 2015. short: X. Gross, 3D-KURZFILM „THE NIGHT OF SPIDERS AND FOOLS“ , Hochschule Ostwestfalen-Lippe, Lemgo, 2015. ufg: 'Gross, Xenia (2015): 3D-KURZFILM „THE NIGHT OF SPIDERS AND FOOLS“ , Lemgo.' van: 'Gross X. 3D-KURZFILM „THE NIGHT OF SPIDERS AND FOOLS“ . Lemgo: Hochschule Ostwestfalen-Lippe; 2015. 82 p.' date_created: 2019-07-29T10:20:04Z date_updated: 2023-03-15T13:49:37Z ddc: - '791' department: - _id: DEP2001 file: - access_level: local content_type: application/pdf creator: czr-e2t date_created: 2019-07-29T10:22:00Z date_updated: 2019-08-05T10:29:23Z file_id: '1680' file_name: Bachelor Dokumentation_Xenia Gross.pdf file_size: 10967954 relation: main_file file_date_updated: 2019-08-05T10:29:23Z has_accepted_license: '1' keyword: - 3D - Charakterdesign - Modelling language: - iso: ger page: '82' place: Lemgo publication_status: published publisher: Hochschule Ostwestfalen-Lippe status: public title: '3D-KURZFILM „THE NIGHT OF SPIDERS AND FOOLS“ ' type: bachelor_thesis user_id: '74004' year: 2015 ... --- _id: '1685' author: - first_name: Kristina full_name: Schäfer, Kristina last_name: Schäfer citation: ama: 'Schäfer K. Die Entwicklung und Modellierung eines Characters in 3ds Max. Lemgo: Hochschule Ostwestfalen-Lippe; 2015.' apa: 'Schäfer, K. (2015). Die Entwicklung und Modellierung eines Characters in 3ds Max. Lemgo: Hochschule Ostwestfalen-Lippe.' bjps: 'Schäfer K (2015) Die Entwicklung und Modellierung eines Characters in 3ds Max. Lemgo: Hochschule Ostwestfalen-Lippe.' chicago: 'Schäfer, Kristina. Die Entwicklung und Modellierung eines Characters in 3ds Max. Lemgo: Hochschule Ostwestfalen-Lippe, 2015.' chicago-de: 'Schäfer, Kristina. 2015. Die Entwicklung und Modellierung eines Characters in 3ds Max. Lemgo: Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Schäfer, Kristina: Die Entwicklung und Modellierung eines Characters in 3ds Max. Lemgo : Hochschule Ostwestfalen-Lippe, 2015' havard: K. Schäfer, Die Entwicklung und Modellierung eines Characters in 3ds Max, Hochschule Ostwestfalen-Lippe, Lemgo, 2015. ieee: 'K. Schäfer, Die Entwicklung und Modellierung eines Characters in 3ds Max. Lemgo: Hochschule Ostwestfalen-Lippe, 2015.' mla: Schäfer, Kristina. Die Entwicklung und Modellierung eines Characters in 3ds Max. Hochschule Ostwestfalen-Lippe, 2015. short: K. Schäfer, Die Entwicklung und Modellierung eines Characters in 3ds Max, Hochschule Ostwestfalen-Lippe, Lemgo, 2015. ufg: 'Schäfer, Kristina (2015): Die Entwicklung und Modellierung eines Characters in 3ds Max, Lemgo.' van: 'Schäfer K. Die Entwicklung und Modellierung eines Characters in 3ds Max. Lemgo: Hochschule Ostwestfalen-Lippe; 2015. 162 p.' date_created: 2019-07-29T10:33:34Z date_updated: 2023-03-15T13:49:37Z ddc: - '770' department: - _id: DEP2001 file: - access_level: closed content_type: application/pdf creator: czr-e2t date_created: 2019-07-29T10:36:08Z date_updated: 2019-07-29T10:36:08Z file_id: '1686' file_name: Bachelor_Arbeit_Schäfer_Kristina_15278096.pdf file_size: 15280457 relation: main_file file_date_updated: 2019-07-29T10:36:08Z has_accepted_license: '1' keyword: - 3D - 3ds Max - Modellierung - Modelling - Character language: - iso: ger page: '162' place: Lemgo publication_status: published publisher: Hochschule Ostwestfalen-Lippe status: public supervisor: - first_name: Guido full_name: Falkemeier, Guido id: '29084' last_name: Falkemeier - first_name: Annika full_name: Möser, Annika last_name: Möser title: Die Entwicklung und Modellierung eines Characters in 3ds Max type: bachelor_thesis user_id: '74004' year: 2015 ... --- _id: '1691' author: - first_name: Johannes full_name: Heine, Johannes last_name: Heine citation: ama: 'Heine J. Die 12 Animationsprinzipien von Disney: Entstehung und Bedeutung für heutige Animationsproduktionen. Lemgo: Hochschule Ostwestfalen-Lippe; 2015.' apa: 'Heine, J. (2015). Die 12 Animationsprinzipien von Disney: Entstehung und Bedeutung für heutige Animationsproduktionen. Lemgo: Hochschule Ostwestfalen-Lippe.' bjps: 'Heine J (2015) Die 12 Animationsprinzipien von Disney: Entstehung und Bedeutung für heutige Animationsproduktionen. Lemgo: Hochschule Ostwestfalen-Lippe.' chicago: 'Heine, Johannes. Die 12 Animationsprinzipien von Disney: Entstehung und Bedeutung für heutige Animationsproduktionen. Lemgo: Hochschule Ostwestfalen-Lippe, 2015.' chicago-de: 'Heine, Johannes. 2015. Die 12 Animationsprinzipien von Disney: Entstehung und Bedeutung für heutige Animationsproduktionen. Lemgo: Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Heine, Johannes: Die 12 Animationsprinzipien von Disney: Entstehung und Bedeutung für heutige Animationsproduktionen. Lemgo : Hochschule Ostwestfalen-Lippe, 2015' havard: 'J. Heine, Die 12 Animationsprinzipien von Disney: Entstehung und Bedeutung für heutige Animationsproduktionen, Hochschule Ostwestfalen-Lippe, Lemgo, 2015.' ieee: 'J. Heine, Die 12 Animationsprinzipien von Disney: Entstehung und Bedeutung für heutige Animationsproduktionen. Lemgo: Hochschule Ostwestfalen-Lippe, 2015.' mla: 'Heine, Johannes. Die 12 Animationsprinzipien von Disney: Entstehung und Bedeutung für heutige Animationsproduktionen. Hochschule Ostwestfalen-Lippe, 2015.' short: 'J. Heine, Die 12 Animationsprinzipien von Disney: Entstehung und Bedeutung für heutige Animationsproduktionen, Hochschule Ostwestfalen-Lippe, Lemgo, 2015.' ufg: 'Heine, Johannes (2015): Die 12 Animationsprinzipien von Disney: Entstehung und Bedeutung für heutige Animationsproduktionen, Lemgo.' van: 'Heine J. Die 12 Animationsprinzipien von Disney: Entstehung und Bedeutung für heutige Animationsproduktionen. Lemgo: Hochschule Ostwestfalen-Lippe; 2015. 65 p.' date_created: 2019-07-29T10:52:38Z date_updated: 2023-03-15T13:49:37Z ddc: - '791' department: - _id: DEP2001 file: - access_level: closed content_type: application/pdf creator: czr-e2t date_created: 2019-07-29T10:54:40Z date_updated: 2019-07-29T10:54:40Z file_id: '1692' file_name: BA_Heine_Animation.pdf file_size: 7668809 relation: main_file file_date_updated: 2019-07-29T10:54:40Z has_accepted_license: '1' keyword: - 3D - Animation - Animationsprinzipien - Disney language: - iso: ger page: '65' place: Lemgo publication_status: published publisher: Hochschule Ostwestfalen-Lippe status: public supervisor: - first_name: Peter full_name: Kaboth, Peter id: '11179' last_name: Kaboth - first_name: Bianca full_name: Büter, Bianca id: '43960' last_name: Büter title: 'Die 12 Animationsprinzipien von Disney: Entstehung und Bedeutung für heutige Animationsproduktionen' type: bachelor_thesis user_id: '74004' year: 2015 ... --- _id: '2128' abstract: - lang: eng text: We present the concept of a perceptive motor in terms of a cyber-physical system (CPS). A model application monitoring a knitting process was developed, where the take-off of the produced fabric is controlled by an electric motor. The idea is to equip a synchronous motor with a smart camera and appropriate image processing hard- and software components. Subsequently, the characteristics of knitted fabric are analysed by machine-learning (ML) methods. Our concept includes motor-current analysis and image processing. The aim is to implement an assistance system for the industrial large circular knitting process. An assistance system will help to shorten the retrofitting process. The concept is based on a low cost hardware approach for a smart camera, and stems from the recent development of image processing applications for mobile devices [1–4]. author: - first_name: Kristijan full_name: Vukovic, Kristijan last_name: Vukovic - first_name: Kristina full_name: Simonis, Kristina last_name: Simonis - first_name: Helene full_name: Dörksen, Helene id: '46416' last_name: Dörksen - first_name: Volker full_name: Lohweg, Volker id: '1804' last_name: Lohweg orcid: 0000-0002-3325-7887 citation: ama: 'Vukovic K, Simonis K, Dörksen H, Lohweg V. Efficient Image Processing System for an Industrial Machine Learning Task. In: Conference on Machine Learning for Cyber-Physical Systems (ML4CPS). Fraunhofer Application Centre IOSB-INA, Lemgo; 2015. doi:10.1007/978-3-662-48838-6_8' apa: Vukovic, K., Simonis, K., Dörksen, H., & Lohweg, V. (2015). Efficient Image Processing System for an Industrial Machine Learning Task. In Conference on Machine Learning for Cyber-Physical Systems (ML4CPS). Fraunhofer Application Centre IOSB-INA, Lemgo. https://doi.org/10.1007/978-3-662-48838-6_8 bjps: Vukovic K et al. (2015) Efficient Image Processing System for an Industrial Machine Learning Task. Conference on Machine Learning for Cyber-Physical Systems (ML4CPS). Fraunhofer Application Centre IOSB-INA, Lemgo. chicago: Vukovic, Kristijan, Kristina Simonis, Helene Dörksen, and Volker Lohweg. “Efficient Image Processing System for an Industrial Machine Learning Task.” In Conference on Machine Learning for Cyber-Physical Systems (ML4CPS). Fraunhofer Application Centre IOSB-INA, Lemgo, 2015. https://doi.org/10.1007/978-3-662-48838-6_8. chicago-de: 'Vukovic, Kristijan, Kristina Simonis, Helene Dörksen und Volker Lohweg. 2015. Efficient Image Processing System for an Industrial Machine Learning Task. In: Conference on Machine Learning for Cyber-Physical Systems (ML4CPS). Fraunhofer Application Centre IOSB-INA, Lemgo. doi:10.1007/978-3-662-48838-6_8, .' din1505-2-1: 'Vukovic, Kristijan ; Simonis, Kristina ; Dörksen, Helene ; Lohweg, Volker: Efficient Image Processing System for an Industrial Machine Learning Task. In: Conference on Machine Learning for Cyber-Physical Systems (ML4CPS). Fraunhofer Application Centre IOSB-INA, Lemgo, 2015' havard: 'K. Vukovic, K. Simonis, H. Dörksen, V. Lohweg, Efficient Image Processing System for an Industrial Machine Learning Task, in: Conference on Machine Learning for Cyber-Physical Systems (ML4CPS), Fraunhofer Application Centre IOSB-INA, Lemgo, 2015.' ieee: K. Vukovic, K. Simonis, H. Dörksen, and V. Lohweg, “Efficient Image Processing System for an Industrial Machine Learning Task,” in Conference on Machine Learning for Cyber-Physical Systems (ML4CPS), 2015. mla: Vukovic, Kristijan, et al. “Efficient Image Processing System for an Industrial Machine Learning Task.” Conference on Machine Learning for Cyber-Physical Systems (ML4CPS), 2015, doi:10.1007/978-3-662-48838-6_8. short: 'K. Vukovic, K. Simonis, H. Dörksen, V. Lohweg, in: Conference on Machine Learning for Cyber-Physical Systems (ML4CPS), Fraunhofer Application Centre IOSB-INA, Lemgo, 2015.' ufg: 'Vukovic, Kristijan et. al. (2015): Efficient Image Processing System for an Industrial Machine Learning Task, in: Conference on Machine Learning for Cyber-Physical Systems (ML4CPS), Fraunhofer Application Centre IOSB-INA, Lemgo.' van: 'Vukovic K, Simonis K, Dörksen H, Lohweg V. Efficient Image Processing System for an Industrial Machine Learning Task. In: Conference on Machine Learning for Cyber-Physical Systems (ML4CPS). Fraunhofer Application Centre IOSB-INA, Lemgo; 2015.' date_created: 2019-12-04T09:04:50Z date_updated: 2023-03-15T13:49:38Z department: - _id: DEP5023 doi: 10.1007/978-3-662-48838-6_8 keyword: - Assistance System - Euler Number - Synchronous Motor - Image Processing System - Image Processing Method language: - iso: eng main_file_link: - url: https://link.springer.com/chapter/10.1007/978-3-662-48838-6_8 place: Fraunhofer Application Centre IOSB-INA, Lemgo publication: Conference on Machine Learning for Cyber-Physical Systems (ML4CPS) status: public title: Efficient Image Processing System for an Industrial Machine Learning Task type: conference user_id: '68554' year: 2015 ... --- _id: '2155' abstract: - lang: eng text: Today, mobile devices (smartphones, tablets, etc.) are widespread and of high importance for their users. Their performance as well as versatility increases over time. This leads to the opportunity to use such devices for more specific tasks like image processing in an industrial context. For the analysis of images requirements like image quality (blur, illumination, etc.) as well as a defined relative position of the object to be inspected are crucial. Since mobile devices are handheld and used in constantly changing environments the challenge is to fulfill these requirements. We present an approach to overcome the obstacles and stabilize the image capturing process such that image analysis becomes significantly improved on mobile devices. Therefore, image processing methods are combined with sensor fusion concepts. The approach consists of three main parts. First, pose estimation methods are used to guide a user moving the device to a defined position. Second, the sensors data and the pose information are combined for relative motion estimation. Finally, the image capturing process is automated. It is triggered depending on the alignment of the device and the object as well as the image quality that can be achieved under consideration of motion and environmental effects. author: - first_name: Kai-Fabian full_name: Henning, Kai-Fabian id: '44017' last_name: Henning - first_name: Alexander full_name: Fritze, Alexander last_name: Fritze - first_name: Eugen full_name: Gillich, Eugen id: '1706' last_name: Gillich - first_name: Uwe full_name: Mönks, Uwe id: '1825' last_name: Mönks - first_name: Volker full_name: Lohweg, Volker id: '1804' last_name: Lohweg orcid: 0000-0002-3325-7887 citation: ama: 'Henning K-F, Fritze A, Gillich E, Mönks U, Lohweg V. Stable Image Acquisition for Mobile Image Processing Applications. In: IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging XI. San Francisco, CA, USA: SPIE; 2015:1-12. doi:10.1117/12.2076146' apa: 'Henning, K.-F., Fritze, A., Gillich, E., Mönks, U., & Lohweg, V. (2015). Stable Image Acquisition for Mobile Image Processing Applications. In IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging XI (pp. 1–12). San Francisco, CA, USA: SPIE. https://doi.org/10.1117/12.2076146' bjps: 'Henning K-F et al. (2015) Stable Image Acquisition for Mobile Image Processing Applications. IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging XI. San Francisco, CA, USA: SPIE, pp. 1–12.' chicago: 'Henning, Kai-Fabian, Alexander Fritze, Eugen Gillich, Uwe Mönks, and Volker Lohweg. “Stable Image Acquisition for Mobile Image Processing Applications.” In IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging XI, 1–12. San Francisco, CA, USA: SPIE, 2015. https://doi.org/10.1117/12.2076146.' chicago-de: 'Henning, Kai-Fabian, Alexander Fritze, Eugen Gillich, Uwe Mönks und Volker Lohweg. 2015. Stable Image Acquisition for Mobile Image Processing Applications. In: IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging XI, 1–12. San Francisco, CA, USA: SPIE. doi:10.1117/12.2076146, .' din1505-2-1: 'Henning, Kai-Fabian ; Fritze, Alexander ; Gillich, Eugen ; Mönks, Uwe ; Lohweg, Volker: Stable Image Acquisition for Mobile Image Processing Applications. In: IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging XI. San Francisco, CA, USA : SPIE, 2015, S. 1–12' havard: 'K.-F. Henning, A. Fritze, E. Gillich, U. Mönks, V. Lohweg, Stable Image Acquisition for Mobile Image Processing Applications, in: IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging XI, SPIE, San Francisco, CA, USA, 2015: pp. 1–12.' ieee: K.-F. Henning, A. Fritze, E. Gillich, U. Mönks, and V. Lohweg, “Stable Image Acquisition for Mobile Image Processing Applications,” in IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging XI, 2015, pp. 1–12. mla: Henning, Kai-Fabian, et al. “Stable Image Acquisition for Mobile Image Processing Applications.” IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging XI, SPIE, 2015, pp. 1–12, doi:10.1117/12.2076146. short: 'K.-F. Henning, A. Fritze, E. Gillich, U. Mönks, V. Lohweg, in: IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging XI, SPIE, San Francisco, CA, USA, 2015, pp. 1–12.' ufg: 'Henning, Kai-Fabian et. al. (2015): Stable Image Acquisition for Mobile Image Processing Applications, in: IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging XI, San Francisco, CA, USA, S. 1–12.' van: 'Henning K-F, Fritze A, Gillich E, Mönks U, Lohweg V. Stable Image Acquisition for Mobile Image Processing Applications. In: IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging XI. San Francisco, CA, USA: SPIE; 2015. p. 1–12.' date_created: 2019-12-04T10:07:01Z date_updated: 2023-03-15T13:49:39Z department: - _id: DEP5023 doi: 10.1117/12.2076146 keyword: - Image processing - Image acquisition - Mobile devices Sensors - Image fusion - Motion estimation - Cameras language: - iso: eng main_file_link: - open_access: '1' url: https://www.spiedigitallibrary.org/conference-proceedings-of-spie/9404/94040N/Stable-image-acquisition-for-mobile-image-processing-applications/10.1117/12.2076146.full?SSO=1 oa: '1' page: 1-12 place: San Francisco, CA, USA publication: IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging XI publisher: SPIE status: public title: Stable Image Acquisition for Mobile Image Processing Applications type: conference user_id: '68554' year: 2015 ... --- _id: '1026' author: - first_name: Daniel full_name: Ruthmann, Daniel last_name: Ruthmann citation: ama: 'Ruthmann D. Archipelago House . Lemgo: Hochschule Ostwestfalen-Lippe; 2012.' apa: 'Ruthmann, D. (2012). Archipelago House . Lemgo: Hochschule Ostwestfalen-Lippe.' bjps: 'Ruthmann D (2012) Archipelago House . Lemgo: Hochschule Ostwestfalen-Lippe.' chicago: 'Ruthmann, Daniel. Archipelago House . Lemgo: Hochschule Ostwestfalen-Lippe, 2012.' chicago-de: 'Ruthmann, Daniel. 2012. Archipelago House . Lemgo: Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Ruthmann, Daniel: Archipelago House . Lemgo : Hochschule Ostwestfalen-Lippe, 2012' havard: D. Ruthmann, Archipelago House , Hochschule Ostwestfalen-Lippe, Lemgo, 2012. ieee: 'D. Ruthmann, Archipelago House . Lemgo: Hochschule Ostwestfalen-Lippe, 2012.' mla: Ruthmann, Daniel. Archipelago House . Hochschule Ostwestfalen-Lippe, 2012. short: D. Ruthmann, Archipelago House , Hochschule Ostwestfalen-Lippe, Lemgo, 2012. ufg: 'Ruthmann, Daniel (2012): Archipelago House , Lemgo.' van: 'Ruthmann D. Archipelago House . Lemgo: Hochschule Ostwestfalen-Lippe; 2012. 45 p.' date_created: 2019-04-16T07:35:02Z date_updated: 2023-03-15T13:49:34Z ddc: - '004' department: - _id: DEP2001 file: - access_level: local content_type: application/pdf creator: hemke date_created: 2019-04-16T07:38:11Z date_updated: 2019-04-16T07:38:11Z file_id: '1027' file_name: Daniel_Ruthmann_Dokumentation_BA.pdf file_size: 17071040 relation: main_file file_date_updated: 2019-04-16T07:38:11Z has_accepted_license: '1' keyword: - 3D - Architekturvisualisierung - CG language: - iso: ger page: '45' place: Lemgo publisher: Hochschule Ostwestfalen-Lippe status: public supervisor: - first_name: Peter full_name: Kaboth, Peter id: '11179' last_name: Kaboth - first_name: Steffen full_name: Bock, Steffen id: '1164' last_name: Bock title: 'Archipelago House ' type: bachelor_thesis user_id: '15514' year: 2012 ... --- _id: '1037' abstract: - lang: eng text: This master thesis focuses on the problems that can occur at 3D stereoscopic productions with a student budget. It provides the reader with the basic knowledge about the human eye. Further the human perception of 3D stereoscopic content is described. The reader will learn about the basic techniques and the technical appliances used in the production and the presentation of 3D stereoscopic movies. The special focus of this work is the comparison of a low budget student spot that was produced in stereoscopic 3D to other well known blockbuster movies regarding the subjects of ghosting/crosstalk, disparity and asynchronous frames. The reader will know how he or she can prepare a 3D life action shooting with a low budget avoiding these three failure sources. author: - first_name: Marcel full_name: Mompour, Marcel last_name: Mompour citation: ama: 'Mompour M. Comparison of 3D Stereoscopic Blockbuster Movies with a 3D Stereoscopic Spot Realised with a Student Budget Regarding Ghosting/Crosstalk, Bad Disparity and Asynchronous Frames. Lemgo: Hochschule Ostwestfalen-Lippe; 2012.' apa: 'Mompour, M. (2012). Comparison of 3D stereoscopic blockbuster movies with a 3D stereoscopic spot realised with a student budget regarding ghosting/crosstalk, bad disparity and asynchronous frames. Lemgo: Hochschule Ostwestfalen-Lippe.' bjps: 'Mompour M (2012) Comparison of 3D Stereoscopic Blockbuster Movies with a 3D Stereoscopic Spot Realised with a Student Budget Regarding Ghosting/Crosstalk, Bad Disparity and Asynchronous Frames. Lemgo: Hochschule Ostwestfalen-Lippe.' chicago: 'Mompour, Marcel. Comparison of 3D Stereoscopic Blockbuster Movies with a 3D Stereoscopic Spot Realised with a Student Budget Regarding Ghosting/Crosstalk, Bad Disparity and Asynchronous Frames. Lemgo: Hochschule Ostwestfalen-Lippe, 2012.' chicago-de: 'Mompour, Marcel. 2012. Comparison of 3D stereoscopic blockbuster movies with a 3D stereoscopic spot realised with a student budget regarding ghosting/crosstalk, bad disparity and asynchronous frames. Lemgo: Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Mompour, Marcel: Comparison of 3D stereoscopic blockbuster movies with a 3D stereoscopic spot realised with a student budget regarding ghosting/crosstalk, bad disparity and asynchronous frames. Lemgo : Hochschule Ostwestfalen-Lippe, 2012' havard: M. Mompour, Comparison of 3D stereoscopic blockbuster movies with a 3D stereoscopic spot realised with a student budget regarding ghosting/crosstalk, bad disparity and asynchronous frames, Hochschule Ostwestfalen-Lippe, Lemgo, 2012. ieee: 'M. Mompour, Comparison of 3D stereoscopic blockbuster movies with a 3D stereoscopic spot realised with a student budget regarding ghosting/crosstalk, bad disparity and asynchronous frames. Lemgo: Hochschule Ostwestfalen-Lippe, 2012.' mla: Mompour, Marcel. Comparison of 3D Stereoscopic Blockbuster Movies with a 3D Stereoscopic Spot Realised with a Student Budget Regarding Ghosting/Crosstalk, Bad Disparity and Asynchronous Frames. Hochschule Ostwestfalen-Lippe, 2012. short: M. Mompour, Comparison of 3D Stereoscopic Blockbuster Movies with a 3D Stereoscopic Spot Realised with a Student Budget Regarding Ghosting/Crosstalk, Bad Disparity and Asynchronous Frames, Hochschule Ostwestfalen-Lippe, Lemgo, 2012. ufg: 'Mompour, Marcel (2012): Comparison of 3D stereoscopic blockbuster movies with a 3D stereoscopic spot realised with a student budget regarding ghosting/crosstalk, bad disparity and asynchronous frames, Lemgo.' van: 'Mompour M. Comparison of 3D stereoscopic blockbuster movies with a 3D stereoscopic spot realised with a student budget regarding ghosting/crosstalk, bad disparity and asynchronous frames. Lemgo: Hochschule Ostwestfalen-Lippe; 2012. 63 p.' date_created: 2019-04-16T08:02:13Z date_updated: 2023-03-15T13:49:34Z ddc: - '770' department: - _id: DEP2001 file: - access_level: local content_type: application/pdf creator: hemke date_created: 2019-04-16T08:05:15Z date_updated: 2019-04-16T08:05:15Z file_id: '1038' file_name: Mompour_Master_Medienproduktion.pdf file_size: 1594563 relation: main_file file_date_updated: 2019-04-16T08:05:15Z has_accepted_license: '1' keyword: - 3D stereoscopic - ghosting - crosstalk - bad synchronisation - disparity - low budget - Stereoskopischer Film - Synchronisierung language: - iso: eng page: '63' place: Lemgo publisher: Hochschule Ostwestfalen-Lippe status: public supervisor: - first_name: Peter full_name: Kaboth, Peter id: '11179' last_name: Kaboth - first_name: Jan full_name: Pieniak, Jan id: '49037' last_name: Pieniak title: Comparison of 3D stereoscopic blockbuster movies with a 3D stereoscopic spot realised with a student budget regarding ghosting/crosstalk, bad disparity and asynchronous frames type: master_thesis user_id: '15514' year: 2012 ... --- _id: '1045' abstract: - lang: eng text: In the context of the increasing use of new portable evices, the potential of binaural recording techniques is being reconsidered. This kind of recording technique simulates human hearing and provides a 3D recording space, bringing in new mixing possibilities. For this paper, a song has been produced using inaural recording techniques and tested on a group of average listeners. The results suggest great potential for this technique for music production due to the 3D space that it brings but also significant limitation for commercial broadcasting. author: - first_name: Angela-Nicoleta full_name: Seserman, Angela-Nicoleta last_name: Seserman citation: ama: 'Seserman A-N. Binaural Recording Techniques in a Popular Music Production. Lemgo: Hochschule Ostwestfalen-Lippe; 2012.' apa: 'Seserman, A.-N. (2012). Binaural recording techniques in a popular music production. Lemgo: Hochschule Ostwestfalen-Lippe.' bjps: 'Seserman A-N (2012) Binaural Recording Techniques in a Popular Music Production. Lemgo: Hochschule Ostwestfalen-Lippe.' chicago: 'Seserman, Angela-Nicoleta. Binaural Recording Techniques in a Popular Music Production. Lemgo: Hochschule Ostwestfalen-Lippe, 2012.' chicago-de: 'Seserman, Angela-Nicoleta. 2012. Binaural recording techniques in a popular music production. Lemgo: Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Seserman, Angela-Nicoleta: Binaural recording techniques in a popular music production. Lemgo : Hochschule Ostwestfalen-Lippe, 2012' havard: A.-N. Seserman, Binaural recording techniques in a popular music production, Hochschule Ostwestfalen-Lippe, Lemgo, 2012. ieee: 'A.-N. Seserman, Binaural recording techniques in a popular music production. Lemgo: Hochschule Ostwestfalen-Lippe, 2012.' mla: Seserman, Angela-Nicoleta. Binaural Recording Techniques in a Popular Music Production. Hochschule Ostwestfalen-Lippe, 2012. short: A.-N. Seserman, Binaural Recording Techniques in a Popular Music Production, Hochschule Ostwestfalen-Lippe, Lemgo, 2012. ufg: 'Seserman, Angela-Nicoleta (2012): Binaural recording techniques in a popular music production, Lemgo.' van: 'Seserman A-N. Binaural recording techniques in a popular music production. Lemgo: Hochschule Ostwestfalen-Lippe; 2012. 46 p.' date_created: 2019-04-16T09:14:29Z date_updated: 2023-03-15T13:49:34Z ddc: - '770' department: - _id: DEP2001 file: - access_level: local content_type: application/pdf creator: hemke date_created: 2019-04-16T09:17:52Z date_updated: 2019-04-16T09:17:52Z file_id: '1046' file_name: Binaural_Recording_Techniques_in_a_Popular_Music_Production_Angela_Seserman_Master_Thesis.pdf file_size: 3865227 relation: main_file file_date_updated: 2019-04-16T09:17:52Z has_accepted_license: '1' keyword: - binaural recording - 3D sound - music production - Musikproduktion - Sound language: - iso: eng page: '46' place: Lemgo publisher: Hochschule Ostwestfalen-Lippe status: public supervisor: - first_name: Frank full_name: Lechtenberg, Frank id: '10784' last_name: Lechtenberg - first_name: Malte full_name: Kob, Malte last_name: Kob title: Binaural recording techniques in a popular music production type: master_thesis user_id: '15514' year: 2012 ... --- _id: '1117' abstract: - lang: eng text: In dem Kurzfilm HAPPYSAD geht es um einen namentlich unbekannten Hauptdarsteller. Optisch ist er im Alter zwischen 50 und 70 einzuordnen, allerdings spielt auch das Alter dabei keine Primäre Rolle. Der Character an sich erhält keine genauere Einführung und verstärkt damit den Eindruck der Austauschbarkeit und damit Anonymität. [...] Erdrückt von der Einsamkeit und der pausenlos verinnenden Zeit, gehen die Blicke immer wieder hektisch zum offen stehenden Fenster. Der Darsteller fasst den Entschluss [...], sich das Leben zu nehmen. Auf dem Fenstrebrett stehend zögert er kurz, springt dann aber in die Tiefe. Sichtlich benommen kommt er in einer für ihn unbekannten Welt wieder zu sich. [...]Doch überraschend schnell wird er wieder in die Realität zurück befördert und stellt fest, dass es sich bei all dem Erlebten (glücklicherweise) nur um einen Traum gehandelt hat. author: - first_name: Jan full_name: Wiechmann, Jan last_name: Wiechmann citation: ama: 'Wiechmann J. Happy Sad : Ein animierter Kurzfilm. Lemgo: Hochschule Ostwestfalen-Lippe; 2011.' apa: 'Wiechmann, J. (2011). Happy Sad : Ein animierter Kurzfilm. Lemgo: Hochschule Ostwestfalen-Lippe.' bjps: 'Wiechmann J (2011) Happy Sad : Ein animierter Kurzfilm. Lemgo: Hochschule Ostwestfalen-Lippe.' chicago: 'Wiechmann, Jan. Happy Sad : Ein animierter Kurzfilm. Lemgo: Hochschule Ostwestfalen-Lippe, 2011.' chicago-de: 'Wiechmann, Jan. 2011. Happy Sad : Ein animierter Kurzfilm. Lemgo: Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Wiechmann, Jan: Happy Sad : Ein animierter Kurzfilm. Lemgo : Hochschule Ostwestfalen-Lippe, 2011' havard: 'J. Wiechmann, Happy Sad : Ein animierter Kurzfilm, Hochschule Ostwestfalen-Lippe, Lemgo, 2011.' ieee: 'J. Wiechmann, Happy Sad : Ein animierter Kurzfilm. Lemgo: Hochschule Ostwestfalen-Lippe, 2011.' mla: 'Wiechmann, Jan. Happy Sad : Ein animierter Kurzfilm. Hochschule Ostwestfalen-Lippe, 2011.' short: 'J. Wiechmann, Happy Sad : Ein animierter Kurzfilm, Hochschule Ostwestfalen-Lippe, Lemgo, 2011.' ufg: 'Wiechmann, Jan (2011): Happy Sad : Ein animierter Kurzfilm, Lemgo.' van: 'Wiechmann J. Happy Sad : Ein animierter Kurzfilm. Lemgo: Hochschule Ostwestfalen-Lippe; 2011. 21 p.' date_created: 2019-05-13T08:28:24Z date_updated: 2023-03-15T13:49:35Z department: - _id: DEP2001 keyword: - 3D-Grafik-Software - Kurzfilm language: - iso: ger page: '21' place: Lemgo publication_status: published publisher: Hochschule Ostwestfalen-Lippe status: public supervisor: - first_name: Guido full_name: Falkemeier, Guido id: '29084' last_name: Falkemeier - first_name: Peter full_name: Kaboth, Peter id: '11179' last_name: Kaboth title: 'Happy Sad : Ein animierter Kurzfilm' type: bachelor_thesis user_id: '15514' year: 2011 ... --- _id: '2058' abstract: - lang: eng text: Nonlinear spatial transforms and fuzzy pattern classification with unimodal potential functions are established in signal processing. They have proved to be excellent tools in feature extraction and classification. In this paper we present a hardware accelerated image processing and classification scheme for rotation and translation tolerant two-dimensional pattern recognition, which is based on one-dimensional nonlinear discrete circular transforms. However, the scheme is simple; it is stable and therefore well suited for industrial applications. An implementation on one field programmable gate array (FPGA) is proposed. author: - first_name: Tobias full_name: Henke, Tobias last_name: Henke - first_name: Volker full_name: Lohweg, Volker id: '1804' last_name: Lohweg orcid: 0000-0002-3325-7887 citation: ama: 'Henke T, Lohweg V. A Simplified Scheme For Hardware-Based Pattern Recognition. In: IEEE International Conference On Image Processing (ICIP), Proceedings. Genova: IEEE; 2005:349-352. doi: 10.1109/ICIP.2005.1529759' apa: 'Henke, T., & Lohweg, V. (2005). A Simplified Scheme For Hardware-Based Pattern Recognition. In IEEE International Conference On Image Processing (ICIP), Proceedings (pp. 349–352). Genova: IEEE. https://doi.org/ 10.1109/ICIP.2005.1529759' bjps: 'Henke T and Lohweg V (2005) A Simplified Scheme For Hardware-Based Pattern Recognition. IEEE International Conference On Image Processing (ICIP), Proceedings. Genova: IEEE, pp. 349–352.' chicago: 'Henke, Tobias, and Volker Lohweg. “A Simplified Scheme For Hardware-Based Pattern Recognition.” In IEEE International Conference On Image Processing (ICIP), Proceedings, 349–52. Genova: IEEE, 2005. https://doi.org/ 10.1109/ICIP.2005.1529759.' chicago-de: 'Henke, Tobias und Volker Lohweg. 2005. A Simplified Scheme For Hardware-Based Pattern Recognition. In: IEEE International Conference On Image Processing (ICIP), Proceedings, 349–352. Genova: IEEE. doi: 10.1109/ICIP.2005.1529759, .' din1505-2-1: 'Henke, Tobias ; Lohweg, Volker: A Simplified Scheme For Hardware-Based Pattern Recognition. In: IEEE International Conference On Image Processing (ICIP), Proceedings. Genova : IEEE, 2005, S. 349–352' havard: 'T. Henke, V. Lohweg, A Simplified Scheme For Hardware-Based Pattern Recognition, in: IEEE International Conference On Image Processing (ICIP), Proceedings, IEEE, Genova, 2005: pp. 349–352.' ieee: T. Henke and V. Lohweg, “A Simplified Scheme For Hardware-Based Pattern Recognition,” in IEEE International Conference On Image Processing (ICIP), Proceedings, 2005, pp. 349–352. mla: Henke, Tobias, and Volker Lohweg. “A Simplified Scheme For Hardware-Based Pattern Recognition.” IEEE International Conference On Image Processing (ICIP), Proceedings, IEEE, 2005, pp. 349–52, doi: 10.1109/ICIP.2005.1529759. short: 'T. Henke, V. Lohweg, in: IEEE International Conference On Image Processing (ICIP), Proceedings, IEEE, Genova, 2005, pp. 349–352.' ufg: 'Henke, Tobias/Lohweg, Volker (2005): A Simplified Scheme For Hardware-Based Pattern Recognition, in: IEEE International Conference On Image Processing (ICIP), Proceedings, Genova, S. 349–352.' van: 'Henke T, Lohweg V. A Simplified Scheme For Hardware-Based Pattern Recognition. In: IEEE International Conference On Image Processing (ICIP), Proceedings. Genova: IEEE; 2005. p. 349–52.' date_created: 2019-11-29T13:17:49Z date_updated: 2023-03-15T13:49:38Z department: - _id: DEP5023 doi: ' 10.1109/ICIP.2005.1529759' keyword: - Pattern recognition - Field programmable gate arrays - Neural networks - Image processing - Discrete transforms - Signal processing - Image retrieval - Image recognition - Transient analysis - Fuzzy systems language: - iso: eng main_file_link: - url: https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=1529759 page: 349 - 352 place: Genova publication: IEEE International Conference On Image Processing (ICIP), Proceedings publication_identifier: eissn: - '2381-8549 ' isbn: - 0-7803-9134-9 issn: - '1522-4880 ' publication_status: published publisher: IEEE status: public title: A Simplified Scheme For Hardware-Based Pattern Recognition type: conference user_id: '45673' year: 2005 ... --- _id: '2056' abstract: - lang: eng text: Nonlinear spatial transforms and fuzzy pattern classification with unimodal potential functions are established in signal processing. They have proved to be excellent tools in feature extraction and classification. In this paper, we will present a hardware-accelerated image processing and classification system which is implemented on one field-programmable gate array (FPGA). Nonlinear discrete circular transforms generate a feature vector. The features are analyzed by a fuzzy classifier. This principle can be used for feature extraction, pattern recognition, and classification tasks. Implementation in radix-2 structures is possible, allowing fast calculations with a computational complexity of up to. Furthermore, the pattern separability properties of these transforms are better than those achieved with the well-known method based on the power spectrum of the Fourier Transform, or on several other transforms. Using different signal flow structures, the transforms can be adapted to different image and signal processing applications. author: - first_name: Volker full_name: Lohweg, Volker id: '1804' last_name: Lohweg orcid: 0000-0002-3325-7887 - first_name: Carsten full_name: Diederichs, Carsten id: '44209' last_name: Diederichs - first_name: Dietmar full_name: Müller, Dietmar last_name: Müller citation: ama: 'Lohweg V, Diederichs C, Müller D. Algorithms for Hardware-Based Pattern Recognition. EURASIP journal on applied signal processing : a publication of the European Association for Speech, Signal, and Image Processing . 2004;12(1):1912-1920. doi:https://doi.org/10.1155/S1110865704404247' apa: 'Lohweg, V., Diederichs, C., & Müller, D. (2004). Algorithms for Hardware-Based Pattern Recognition. EURASIP Journal on Applied Signal Processing : A Publication of the European Association for Speech, Signal, and Image Processing , 12(1), 1912–1920. https://doi.org/10.1155/S1110865704404247' bjps: 'Lohweg V, Diederichs C and Müller D (2004) Algorithms for Hardware-Based Pattern Recognition. EURASIP journal on applied signal processing : a publication of the European Association for Speech, Signal, and Image Processing 12, 1912–1920.' chicago: 'Lohweg, Volker, Carsten Diederichs, and Dietmar Müller. “Algorithms for Hardware-Based Pattern Recognition.” EURASIP Journal on Applied Signal Processing : A Publication of the European Association for Speech, Signal, and Image Processing 12, no. 1 (2004): 1912–20. https://doi.org/10.1155/S1110865704404247.' chicago-de: 'Lohweg, Volker, Carsten Diederichs und Dietmar Müller. 2004. Algorithms for Hardware-Based Pattern Recognition. EURASIP journal on applied signal processing : a publication of the European Association for Speech, Signal, and Image Processing 12, Nr. 1: 1912–1920. doi:https://doi.org/10.1155/S1110865704404247, .' din1505-2-1: 'Lohweg, Volker ; Diederichs, Carsten ; Müller, Dietmar: Algorithms for Hardware-Based Pattern Recognition. In: EURASIP journal on applied signal processing : a publication of the European Association for Speech, Signal, and Image Processing Bd. 12. Akron, Ohio, Hindawi Publ. (2004), Nr. 1, S. 1912–1920' havard: 'V. Lohweg, C. Diederichs, D. Müller, Algorithms for Hardware-Based Pattern Recognition, EURASIP Journal on Applied Signal Processing : A Publication of the European Association for Speech, Signal, and Image Processing . 12 (2004) 1912–1920.' ieee: 'V. Lohweg, C. Diederichs, and D. Müller, “Algorithms for Hardware-Based Pattern Recognition,” EURASIP journal on applied signal processing : a publication of the European Association for Speech, Signal, and Image Processing , vol. 12, no. 1, pp. 1912–1920, 2004.' mla: 'Lohweg, Volker, et al. “Algorithms for Hardware-Based Pattern Recognition.” EURASIP Journal on Applied Signal Processing : A Publication of the European Association for Speech, Signal, and Image Processing , vol. 12, no. 1, Hindawi Publ., 2004, pp. 1912–20, doi:https://doi.org/10.1155/S1110865704404247.' short: 'V. Lohweg, C. Diederichs, D. Müller, EURASIP Journal on Applied Signal Processing : A Publication of the European Association for Speech, Signal, and Image Processing 12 (2004) 1912–1920.' ufg: 'Lohweg, Volker et. al. (2004): Algorithms for Hardware-Based Pattern Recognition, in: EURASIP journal on applied signal processing : a publication of the European Association for Speech, Signal, and Image Processing 12 (1), S. 1912–1920.' van: 'Lohweg V, Diederichs C, Müller D. Algorithms for Hardware-Based Pattern Recognition. EURASIP journal on applied signal processing : a publication of the European Association for Speech, Signal, and Image Processing . 2004;12(1):1912–20.' date_created: 2019-11-29T13:09:05Z date_updated: 2023-03-15T13:49:38Z department: - _id: DEP5023 doi: https://doi.org/10.1155/S1110865704404247 intvolume: ' 12' issue: '1' keyword: - image processing - nonlinear circular transforms - feature extraction - fuzzy pattern recognition language: - iso: eng main_file_link: - open_access: '1' url: https://asp-eurasipjournals.springeropen.com/track/pdf/10.1155/S1110865704404247 oa: '1' page: 1912-1920 place: Akron, Ohio publication: 'EURASIP journal on applied signal processing : a publication of the European Association for Speech, Signal, and Image Processing ' publication_identifier: issn: - '1110-8657 ' publication_status: published publisher: Hindawi Publ. status: public title: Algorithms for Hardware-Based Pattern Recognition type: journal_article user_id: '15514' volume: 12 year: 2004 ...