---
_id: '12740'
abstract:
- lang: eng
text: "The high-tech architecture of the 1970s–1990s is typically characterized
by the use and exhibition of advanced technologies. In terms of appearance, these
buildings often have innovative façades, supporting structures accentuated in
color, and expressively displayed technology systems. Unfortunately, however,
the rapid obsolescence of technology has often led to the complete replacement
of the very systems that defined the architectural form. In 2023, an international
conference at ETH Zurich in collaboration with Bauhaus-Universität Weimar explored
the question of how best to deal with the structural legacy of technologically
innovative architecture. This book summarizes the results and provides an overview
of the current state of research.\r\n\r\nCurrent state of research on high-tech
architecture and its conservation\r\nOverview of the opportunities and challenges
of high-tech buildings\r\nNew findings on the topic of building within existing
structures\r\nAlso available as a set with the congress volume Denkmal Postmoderne
978-3-0356-2783-1"
author:
- first_name: Uta
full_name: Pottgiesser, Uta
id: '27166'
last_name: Pottgiesser
orcid: 0000-0002-8594-3168
citation:
ama: 'Pottgiesser U. Retracted: Structural Sealant Glazing (SSG): History, Construction,
and Conservation Challenges. In: Brenner M, Langenberg Silke , Angermann Kirsten
, Meier HR, eds. High-Tech Heritage : (Im)Permanence of Innovative Architecture.
Birkhäuser; 2024:109-116. doi:https://doi.org/10.1515/9783035627862-016'
apa: 'Pottgiesser, U. (2024). Retracted: Structural Sealant Glazing (SSG): History,
Construction, and Conservation Challenges. In M. Brenner , Silke Langenberg, Kirsten Angermann
, & H.-R. Meier (Eds.), High-Tech Heritage : (Im)permanence of Innovative
Architecture (pp. 109–116). Birkhäuser. https://doi.org/10.1515/9783035627862-016'
bjps: 'Pottgiesser U (2024) Retracted: Structural Sealant Glazing (SSG):
History, Construction, and Conservation Challenges. In Brenner M et al. (eds),
High-Tech Heritage : (Im)Permanence of Innovative Architecture. Basel:
Birkhäuser, pp. 109–116.'
chicago: 'Pottgiesser, Uta. “Retracted: Structural Sealant Glazing (SSG): History,
Construction, and Conservation Challenges.” In High-Tech Heritage : (Im)Permanence
of Innovative Architecture, edited by Matthias Brenner , Silke Langenberg, Kirsten Angermann
, and Hans-Rudolf Meier, 109–16. Basel: Birkhäuser, 2024. https://doi.org/10.1515/9783035627862-016.'
chicago-de: 'Pottgiesser, Uta. 2024. Retracted: Structural Sealant Glazing (SSG):
History, Construction, and Conservation Challenges. In: High-Tech Heritage :
(Im)permanence of Innovative Architecture, hg. von Matthias Brenner , Silke Langenberg, Kirsten Angermann
, und Hans-Rudolf Meier, 109–116. Basel: Birkhäuser. doi:https://doi.org/10.1515/9783035627862-016,
.'
din1505-2-1: 'Pottgiesser, Uta: Retracted:
Structural Sealant Glazing (SSG): History, Construction, and Conservation Challenges.
In: Brenner , M. ; Langenberg, Silke
; Angermann , Kirsten
; Meier, H.-R. (Hrsg.): High-Tech
Heritage : (Im)permanence of Innovative Architecture. Basel : Birkhäuser,
2024, S. 109–116'
havard: 'U. Pottgiesser, Retracted: Structural Sealant Glazing (SSG): History, Construction,
and Conservation Challenges, in: M. Brenner , Silke Langenberg, Kirsten Angermann
, H.-R. Meier (Eds.), High-Tech Heritage : (Im)Permanence of Innovative Architecture,
Birkhäuser, Basel, 2024: pp. 109–116.'
ieee: 'U. Pottgiesser, “Retracted: Structural Sealant Glazing (SSG): History, Construction,
and Conservation Challenges,” in High-Tech Heritage : (Im)permanence of Innovative
Architecture, M. Brenner , Silke Langenberg, Kirsten Angermann , and H.-R.
Meier, Eds. Basel: Birkhäuser, 2024, pp. 109–116. doi: https://doi.org/10.1515/9783035627862-016.'
mla: 'Pottgiesser, Uta. “Retracted: Structural Sealant Glazing (SSG): History, Construction,
and Conservation Challenges.” High-Tech Heritage : (Im)Permanence of Innovative
Architecture, edited by Matthias Brenner et al., Birkhäuser, 2024, pp. 109–16,
https://doi.org/10.1515/9783035627862-016.'
short: 'U. Pottgiesser, in: M. Brenner , Silke Langenberg, Kirsten Angermann
, H.-R. Meier (Eds.), High-Tech Heritage : (Im)Permanence of Innovative Architecture,
Birkhäuser, Basel, 2024, pp. 109–116.'
ufg: 'Pottgiesser, Uta: Retracted: Structural Sealant Glazing (SSG): History,
Construction, and Conservation Challenges, in: Brenner , Matthias u. a. (Hgg.):
High-Tech Heritage : (Im)permanence of Innovative Architecture, Basel 2024, S.
109–116.'
van: 'Pottgiesser U. Retracted: Structural Sealant Glazing (SSG): History, Construction,
and Conservation Challenges. In: Brenner M, Langenberg Silke , Angermann Kirsten
, Meier HR, editors. High-Tech Heritage : (Im)permanence of Innovative Architecture.
Basel: Birkhäuser; 2024. p. 109–16.'
conference:
end_date: 2023-09-16
location: Zürich
name: 'Conference on "High-Tech Heritage: (Im)permanence of Innovation"'
start_date: 2023-09-14
date_created: 2025-03-27T20:39:04Z
date_updated: 2025-03-28T07:31:52Z
department:
- _id: DEP1620
- _id: DEP1055
doi: https://doi.org/10.1515/9783035627862-016
editor:
- first_name: 'Matthias '
full_name: 'Brenner , Matthias '
last_name: 'Brenner '
- first_name: ' Silke '
full_name: 'Langenberg, Silke '
last_name: Langenberg
- first_name: ' Kirsten '
full_name: 'Angermann , Kirsten '
last_name: 'Angermann '
- first_name: 'Hans-Rudolf '
full_name: 'Meier, Hans-Rudolf '
last_name: Meier
keyword:
- preservation
- maintenance
- conversion
- building culture
- postmodern architecture
- high-tech architecture
- postmodernism
- cultural heritage
- architectural monument
- historical monument
- monument preservation
language:
- iso: eng
page: 109-116
place: Basel
publication: 'High-Tech Heritage : (Im)permanence of Innovative Architecture'
publication_identifier:
eisbn:
- 978-3-0356-2786-2
isbn:
- 978-3-0356-2784-8
publication_status: published
publisher: Birkhäuser
quality_controlled: '1'
related_material:
link:
- relation: original
url: 'https://birkhauser.com/en/book/9783035627862 '
status: public
title: 'Retracted: Structural Sealant Glazing (SSG): History, Construction, and Conservation
Challenges'
type: book_chapter
user_id: '83781'
year: '2024'
...
---
_id: '4311'
abstract:
- lang: eng
text: Recent trends towards digitization in the industrial domain are also driving
profound socio-technical changes. On the one hand, these technologies enable shorter
product lifecycles and servitization, but on the other hand, the increasing technical
complexity of the equipment makes its operation and maintenance a challenge for
workers. Assistance systems using pervasive technologies can bridge the gap between
the abilities of the workers and the demands of handling technical complexity
by enriching workplace activities with relevant, context-dependent information.
In this paper, we present an application that replaces a conventional, paper-based
maintenance manual with digital, Augmented Reality based instructions that are
delivered at the appropriate place and time.
author:
- first_name: Hitesh
full_name: Dhiman, Hitesh
id: '71767'
last_name: Dhiman
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Dhiman H, Röcker C. Worker Assistance in Smart Production Environments using
Pervasive Technologies. In: 2019 IEEE International Conference on Pervasive
Computing and Communications Workshops (PerCom Workshops). Piscataway, NJ:
IEEE; 2019:95-100. doi:10.1109/PERCOMW.2019.8730771'
apa: 'Dhiman, H., & Röcker, C. (2019). Worker Assistance in Smart Production
Environments using Pervasive Technologies. In 2019 IEEE International Conference
on Pervasive Computing and Communications Workshops (PerCom Workshops) (pp.
95–100). Piscataway, NJ: IEEE. https://doi.org/10.1109/PERCOMW.2019.8730771'
bjps: 'Dhiman H and Röcker C (2019) Worker Assistance in Smart Production
Environments Using Pervasive Technologies. 2019 IEEE International Conference
on Pervasive Computing and Communications Workshops (PerCom Workshops). Piscataway,
NJ: IEEE, pp. 95–100.'
chicago: 'Dhiman, Hitesh, and Carsten Röcker. “Worker Assistance in Smart Production
Environments Using Pervasive Technologies.” In 2019 IEEE International Conference
on Pervasive Computing and Communications Workshops (PerCom Workshops), 95–100.
Piscataway, NJ: IEEE, 2019. https://doi.org/10.1109/PERCOMW.2019.8730771.'
chicago-de: 'Dhiman, Hitesh und Carsten Röcker. 2019. Worker Assistance in Smart
Production Environments using Pervasive Technologies. In: 2019 IEEE International
Conference on Pervasive Computing and Communications Workshops (PerCom Workshops),
95–100. Piscataway, NJ: IEEE. doi:10.1109/PERCOMW.2019.8730771,
.'
din1505-2-1: 'Dhiman, Hitesh ; Röcker, Carsten: Worker Assistance in
Smart Production Environments using Pervasive Technologies. In: 2019 IEEE International
Conference on Pervasive Computing and Communications Workshops (PerCom Workshops).
Piscataway, NJ : IEEE, 2019, S. 95–100'
havard: 'H. Dhiman, C. Röcker, Worker Assistance in Smart Production Environments
using Pervasive Technologies, in: 2019 IEEE International Conference on Pervasive
Computing and Communications Workshops (PerCom Workshops), IEEE, Piscataway, NJ,
2019: pp. 95–100.'
ieee: 'H. Dhiman and C. Röcker, “Worker Assistance in Smart Production Environments
using Pervasive Technologies,” in 2019 IEEE International Conference on Pervasive
Computing and Communications Workshops (PerCom Workshops), Piscataway, NJ:
IEEE, 2019, pp. 95–100.'
mla: Dhiman, Hitesh, and Carsten Röcker. “Worker Assistance in Smart Production
Environments Using Pervasive Technologies.” 2019 IEEE International Conference
on Pervasive Computing and Communications Workshops (PerCom Workshops), IEEE,
2019, pp. 95–100, doi:10.1109/PERCOMW.2019.8730771.
short: 'H. Dhiman, C. Röcker, in: 2019 IEEE International Conference on Pervasive
Computing and Communications Workshops (PerCom Workshops), IEEE, Piscataway, NJ,
2019, pp. 95–100.'
ufg: 'Dhiman, Hitesh/Röcker, Carsten (2019): Worker Assistance in Smart Production
Environments using Pervasive Technologies, in: 2019 IEEE International Conference
on Pervasive Computing and Communications Workshops (PerCom Workshops), Piscataway,
NJ, S. 95–100.'
van: 'Dhiman H, Röcker C. Worker Assistance in Smart Production Environments using
Pervasive Technologies. In: 2019 IEEE International Conference on Pervasive Computing
and Communications Workshops (PerCom Workshops). Piscataway, NJ: IEEE; 2019. p.
95–100.'
conference:
end_date: 2019-03-15
location: Kyoto, Japan
name: '2019 IEEE International Conference on Pervasive Computing and Communications '
start_date: 2019-03-11
date_created: 2021-01-06T13:59:08Z
date_updated: 2023-03-15T13:49:51Z
department:
- _id: DEP5023
doi: 10.1109/PERCOMW.2019.8730771
keyword:
- Industry 4.0
- Cyber Physical Systems
- Augmented Reality
- Complexity
- Maintenance
- HoloLens
language:
- iso: eng
page: 95 - 100
place: Piscataway, NJ
publication: 2019 IEEE International Conference on Pervasive Computing and Communications
Workshops (PerCom Workshops)
publication_identifier:
isbn:
- 978-1-5386-9151-9
publication_status: published
publisher: IEEE
status: public
title: Worker Assistance in Smart Production Environments using Pervasive Technologies
type: book_chapter
user_id: '15514'
year: 2019
...
---
_id: '4761'
abstract:
- lang: eng
text: Maintenance is an important set of various activities related to preserving
from failure or decline. Improper or lack of maintenance may result in excessive
component wear, production quality deterioration, or even longer downtime. However,
today's production facilities strive to devote the least amount of necessary maintenance
time in order to maximize production time. Therefore, new solutions for deliberate
and efficient maintenance are needed. The solution proposed in this paper benefits
from the newest trends and innovations in industry, namely the Asset Administration
Shell (AAS) which is part of the Industrie 4.0 (I4.0) concept. The AAS shall contain
the maintenance submodel which shall be used for supporting humans during the
maintenance process. The submodel provides a standardized description of required
tools and parts as well as step-by-step instructions which also include safety
concerns and multimedia files, such as pictures and videos. In this way, maintenance
can be carried out more reliably, resulting in reduced downtime. In addition,
feedback from the maintenance process shall be stored in the submodel and fed
through an I4.0-compliant network to other processes from different phases of
the life cycle in order to improve them.
author:
- first_name: Dorota
full_name: Lang, Dorota
id: '68941'
last_name: Lang
- first_name: Sergej
full_name: Grunau, Sergej
id: '62156'
last_name: Grunau
- first_name: Lukasz
full_name: Wisniewski, Lukasz
id: '1710'
last_name: Wisniewski
- first_name: Jürgen
full_name: Jasperneite, Jürgen
id: '1899'
last_name: Jasperneite
citation:
ama: 'Lang D, Grunau S, Wisniewski L, Jasperneite J. Utilization of the Asset Administration
Shell to Support Humans During the Maintenance Process. In: Aalto-Yliopisto, Tampereen
yliopisto , Suomen Automaatioseura , Institute of Electrical and Electronics Engineers
, eds. 17th International Conference on Industrial Informatics (IEEE-INDIN
2019). IEEE International Conference on Industrial Informatics INDIN. IEEE;
2019:768-773. doi:10.1109/indin41052.2019.8972236'
apa: Lang, D., Grunau, S., Wisniewski, L., & Jasperneite, J. (2019). Utilization
of the Asset Administration Shell to Support Humans During the Maintenance Process.
In Aalto-Yliopisto, Tampereen yliopisto , Suomen Automaatioseura , & Institute
of Electrical and Electronics Engineers (Eds.), 17th International Conference
on Industrial Informatics (IEEE-INDIN 2019) (pp. 768–773). IEEE. https://doi.org/10.1109/indin41052.2019.8972236
bjps: 'Lang D et al. (2019) Utilization of the Asset Administration
Shell to Support Humans During the Maintenance Process. In Aalto-Yliopisto et
al. (eds), 17th International Conference on Industrial Informatics (IEEE-INDIN
2019). [Piscataway, NJ]: IEEE, pp. 768–773.'
chicago: 'Lang, Dorota, Sergej Grunau, Lukasz Wisniewski, and Jürgen Jasperneite.
“Utilization of the Asset Administration Shell to Support Humans During the Maintenance
Process.” In 17th International Conference on Industrial Informatics (IEEE-INDIN
2019), edited by Aalto-Yliopisto, Tampereen yliopisto , Suomen Automaatioseura
, and Institute of Electrical and Electronics Engineers , 768–73. IEEE International
Conference on Industrial Informatics INDIN. [Piscataway, NJ]: IEEE, 2019. https://doi.org/10.1109/indin41052.2019.8972236.'
chicago-de: 'Lang, Dorota, Sergej Grunau, Lukasz Wisniewski und Jürgen Jasperneite.
2019. Utilization of the Asset Administration Shell to Support Humans During the
Maintenance Process. In: 17th International Conference on Industrial Informatics
(IEEE-INDIN 2019), hg. von Aalto-Yliopisto, Tampereen yliopisto , Suomen Automaatioseura
, und Institute of Electrical and Electronics Engineers , 768–773. IEEE International
Conference on Industrial Informatics INDIN. [Piscataway, NJ]: IEEE. doi:10.1109/indin41052.2019.8972236,
.'
din1505-2-1: 'Lang, Dorota ; Grunau, Sergej ; Wisniewski,
Lukasz ; Jasperneite, Jürgen:
Utilization of the Asset Administration Shell to Support Humans During the Maintenance
Process. In: Aalto-Yliopisto ; Tampereen yliopisto ; Suomen
Automaatioseura ; Institute of
Electrical and Electronics Engineers (Hrsg.): 17th International Conference
on Industrial Informatics (IEEE-INDIN 2019), IEEE International Conference
on Industrial Informatics INDIN. [Piscataway, NJ] : IEEE, 2019, S. 768–773'
havard: 'D. Lang, S. Grunau, L. Wisniewski, J. Jasperneite, Utilization of the Asset
Administration Shell to Support Humans During the Maintenance Process, in: Aalto-Yliopisto,
Tampereen yliopisto , Suomen Automaatioseura , Institute of Electrical and Electronics
Engineers (Eds.), 17th International Conference on Industrial Informatics (IEEE-INDIN
2019), IEEE, [Piscataway, NJ], 2019: pp. 768–773.'
ieee: 'D. Lang, S. Grunau, L. Wisniewski, and J. Jasperneite, “Utilization of the
Asset Administration Shell to Support Humans During the Maintenance Process,”
in 17th International Conference on Industrial Informatics (IEEE-INDIN 2019),
Helsinki-Espoo, Finland, 2019, pp. 768–773. doi: 10.1109/indin41052.2019.8972236.'
mla: Lang, Dorota, et al. “Utilization of the Asset Administration Shell to Support
Humans During the Maintenance Process.” 17th International Conference on Industrial
Informatics (IEEE-INDIN 2019), edited by Aalto-Yliopisto et al., IEEE, 2019,
pp. 768–73, https://doi.org/10.1109/indin41052.2019.8972236.
short: 'D. Lang, S. Grunau, L. Wisniewski, J. Jasperneite, in: Aalto-Yliopisto,
Tampereen yliopisto , Suomen Automaatioseura , Institute of Electrical and Electronics
Engineers (Eds.), 17th International Conference on Industrial Informatics (IEEE-INDIN
2019), IEEE, [Piscataway, NJ], 2019, pp. 768–773.'
ufg: 'Lang, Dorota u. a.: Utilization of the Asset Administration Shell to
Support Humans During the Maintenance Process, in: Aalto-Yliopisto u. a. (Hgg.):
17th International Conference on Industrial Informatics (IEEE-INDIN 2019), [Piscataway,
NJ] 2019 (IEEE International Conference on Industrial Informatics INDIN), S.
768–773.'
van: 'Lang D, Grunau S, Wisniewski L, Jasperneite J. Utilization of the Asset Administration
Shell to Support Humans During the Maintenance Process. In: Aalto-Yliopisto, Tampereen
yliopisto , Suomen Automaatioseura , Institute of Electrical and Electronics Engineers
, editors. 17th International Conference on Industrial Informatics (IEEE-INDIN
2019). [Piscataway, NJ]: IEEE; 2019. p. 768–73. (IEEE International Conference
on Industrial Informatics INDIN).'
conference:
end_date: 2019-07-25
location: Helsinki-Espoo, Finland
name: 17th IEEE International Conference on Industrial Informatics (INDIN)
start_date: 2019-07-22
corporate_editor:
- Aalto-Yliopisto
- 'Tampereen yliopisto '
- 'Suomen Automaatioseura '
- 'Institute of Electrical and Electronics Engineers '
date_created: 2021-01-28T14:55:44Z
date_updated: 2025-06-26T13:36:42Z
department:
- _id: DEP5023
- _id: DEP5019
doi: 10.1109/indin41052.2019.8972236
keyword:
- maintenance
- Asset Administration Shell
language:
- iso: eng
page: 768-773
place: '[Piscataway, NJ]'
publication: 17th International Conference on Industrial Informatics (IEEE-INDIN 2019)
publication_identifier:
eisbn:
- '978-1-7281-2927-3 '
isbn:
- '978-1-7281-2928-0 '
issn:
- 1935-4576
publication_status: published
publisher: IEEE
series_title: IEEE International Conference on Industrial Informatics INDIN
status: public
title: Utilization of the Asset Administration Shell to Support Humans During the
Maintenance Process
type: conference
user_id: '83781'
year: '2019'
...
---
_id: '4327'
abstract:
- lang: eng
text: In ever changing world, the industrial systems become more and more complex.
Machine feedback in the form of alarms and notifications, due to its growing volume,
becomes overwhelming for the operator. In addition, expectations in relation to
system availability are growing as well. Therefore, there exists strong need for
new solutions guaranteeing fast troubleshooting of problems that arise during
system operation. The approach proposed in this study uses advantages of the Asset
Administration Shell, machine learning, and human-machine interaction in order
to create the assistance system which holistically addresses the issue of troubleshooting
complex industrial systems.
author:
- first_name: Dorota
full_name: Lang, Dorota
id: '68941'
last_name: Lang
- first_name: Paul
full_name: Wunderlich, Paul
id: '52317'
last_name: Wunderlich
- first_name: Mario
full_name: Heinz, Mario
id: '68913'
last_name: Heinz
- first_name: Lukasz
full_name: Wisniewski, Lukasz
id: '1710'
last_name: Wisniewski
- first_name: Jürgen
full_name: Jasperneite, Jürgen
id: '1899'
last_name: Jasperneite
- first_name: Oliver
full_name: Niggemann, Oliver
id: '10876'
last_name: Niggemann
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Lang D, Wunderlich P, Heinz M, et al. Assistance System to Support Troubleshooting
of Complex Industrial Systems. In: 14th IEEE International Workshop on Factory
Communication Systems (WFCS). Piscataway, NJ: IEEE; 2018. doi:10.1109/WFCS.2018.8402380'
apa: 'Lang, D., Wunderlich, P., Heinz, M., Wisniewski, L., Jasperneite, J., Niggemann,
O., & Röcker, C. (2018). Assistance System to Support Troubleshooting of Complex
Industrial Systems. In 14th IEEE International Workshop on Factory Communication
Systems (WFCS). Piscataway, NJ: IEEE. https://doi.org/10.1109/WFCS.2018.8402380'
bjps: 'Lang D et al. (2018) Assistance System to Support Troubleshooting
of Complex Industrial Systems. 14th IEEE International Workshop on Factory
Communication Systems (WFCS). Piscataway, NJ: IEEE.'
chicago: 'Lang, Dorota, Paul Wunderlich, Mario Heinz, Lukasz Wisniewski, Jürgen
Jasperneite, Oliver Niggemann, and Carsten Röcker. “Assistance System to Support
Troubleshooting of Complex Industrial Systems.” In 14th IEEE International
Workshop on Factory Communication Systems (WFCS). Piscataway, NJ: IEEE, 2018.
https://doi.org/10.1109/WFCS.2018.8402380.'
chicago-de: 'Lang, Dorota, Paul Wunderlich, Mario Heinz, Lukasz Wisniewski, Jürgen
Jasperneite, Oliver Niggemann und Carsten Röcker. 2018. Assistance System to Support
Troubleshooting of Complex Industrial Systems. In: 14th IEEE International
Workshop on Factory Communication Systems (WFCS). Piscataway, NJ: IEEE. doi:10.1109/WFCS.2018.8402380,
.'
din1505-2-1: 'Lang, Dorota ; Wunderlich, Paul ; Heinz,
Mario ; Wisniewski, Lukasz
; Jasperneite, Jürgen ; Niggemann,
Oliver ; Röcker, Carsten:
Assistance System to Support Troubleshooting of Complex Industrial Systems. In:
14th IEEE International Workshop on Factory Communication Systems (WFCS).
Piscataway, NJ : IEEE, 2018'
havard: 'D. Lang, P. Wunderlich, M. Heinz, L. Wisniewski, J. Jasperneite, O. Niggemann,
C. Röcker, Assistance System to Support Troubleshooting of Complex Industrial
Systems, in: 14th IEEE International Workshop on Factory Communication Systems
(WFCS), IEEE, Piscataway, NJ, 2018.'
ieee: D. Lang et al., “Assistance System to Support Troubleshooting of Complex
Industrial Systems,” in 14th IEEE International Workshop on Factory Communication
Systems (WFCS), Imperia, Italy , 2018.
mla: Lang, Dorota, et al. “Assistance System to Support Troubleshooting of Complex
Industrial Systems.” 14th IEEE International Workshop on Factory Communication
Systems (WFCS), IEEE, 2018, doi:10.1109/WFCS.2018.8402380.
short: 'D. Lang, P. Wunderlich, M. Heinz, L. Wisniewski, J. Jasperneite, O. Niggemann,
C. Röcker, in: 14th IEEE International Workshop on Factory Communication Systems
(WFCS), IEEE, Piscataway, NJ, 2018.'
ufg: 'Lang, Dorota et. al. (2018): Assistance System to Support Troubleshooting
of Complex Industrial Systems, in: 14th IEEE International Workshop on Factory
Communication Systems (WFCS), Piscataway, NJ.'
van: 'Lang D, Wunderlich P, Heinz M, Wisniewski L, Jasperneite J, Niggemann O, et
al. Assistance System to Support Troubleshooting of Complex Industrial Systems.
In: 14th IEEE International Workshop on Factory Communication Systems (WFCS).
Piscataway, NJ: IEEE; 2018.'
conference:
end_date: 2018-06-15
location: 'Imperia, Italy '
name: 14th IEEE International Workshop on Factory Communication Systems (WFCS)
start_date: 2018-06-13
date_created: 2021-01-08T08:26:30Z
date_updated: 2023-03-15T13:49:52Z
department:
- _id: DEP5023
- _id: DEP5019
doi: 10.1109/WFCS.2018.8402380
keyword:
- Maintenance engineering
- Adaptation models
- Machine learning
- Data models
- Standards
- Software
- Bayes methods
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
place: Piscataway, NJ
publication: 14th IEEE International Workshop on Factory Communication Systems (WFCS)
publication_identifier:
eisbn:
- 978-1-5386-1066-4
publication_status: published
publisher: IEEE
status: public
title: Assistance System to Support Troubleshooting of Complex Industrial Systems
type: conference
user_id: '45673'
year: 2018
...
---
_id: '561'
abstract:
- lang: eng
text: A paradigm shift in the field of maintenance is essential for companies due
to a progressive digitalization of production processes. Therefore, the new paradigm
considersall phases of a system, from procurement, operation through to the recycling
of the machine. Initially, at the start of the cycle manufacturers of machines
and equipment have to focus on design, implementation and quality assurance in
compliance with the requirements for operation and maintenance to minimize lifecycle
cost. During operation,an efficient strategy for maintaining must be defined.
Based on the introduced paradigm a maintenance check is presented, able to provide
orientation to small and middle-sizedenterprises regarding their maintenance situation
and level. The respective level is described on basis of the degree of maturity.
Regarding further steps, it is the fundament for strategic decisions and activities.
author:
- first_name: Thomas
full_name: Glatzel, Thomas
id: '64888'
last_name: Glatzel
- first_name: Sven
full_name: Tackenberg, Sven
id: '71470'
last_name: Tackenberg
citation:
ama: 'Glatzel T, Tackenberg S. Smart Production - A Paradigm-Shift in the Field
of Maintenance. In: Villmer F-J, Padoano E, Department of Production Engineering
and Management, eds. Production Engineering and Management. Lemgo; 2018:245-255.'
apa: Glatzel, T., & Tackenberg, S. (2018). Smart Production - A Paradigm-Shift
in the Field of Maintenance. In F.-J. Villmer, E. Padoano, & Department of
Production Engineering and Management (Eds.), Production Engineering and Management
(pp. 245–255). Lemgo.
bjps: Glatzel T and Tackenberg S (2018) Smart Production - A Paradigm-Shift
in the Field of Maintenance. In Villmer F-J, Padoano E and Department of Production
Engineering and Management (eds), Production Engineering and Management.
Lemgo, pp. 245–255.
chicago: Glatzel, Thomas, and Sven Tackenberg. “Smart Production - A Paradigm-Shift
in the Field of Maintenance.” In Production Engineering and Management,
edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering
and Management, 245–55. Lemgo, 2018.
chicago-de: 'Glatzel, Thomas und Sven Tackenberg. 2018. Smart Production - A Paradigm-Shift
in the Field of Maintenance. In: Production Engineering and Management,
hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering
and Management, 245–255. Lemgo.'
din1505-2-1: 'Glatzel, Thomas ; Tackenberg, Sven: Smart Production - A
Paradigm-Shift in the Field of Maintenance. In: Villmer,
F.-J. ; Padoano, E. ; Department of Production Engineering and Management
(Hrsg.): Production Engineering and Management. Lemgo, 2018, S. 245–255'
havard: 'T. Glatzel, S. Tackenberg, Smart Production - A Paradigm-Shift in the Field
of Maintenance, in: F.-J. Villmer, E. Padoano, Department of Production Engineering
and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp.
245–255.'
ieee: T. Glatzel and S. Tackenberg, “Smart Production - A Paradigm-Shift in the
Field of Maintenance,” in Production Engineering and Management, Lemgo,
2018, no. 1, pp. 245–255.
mla: Glatzel, Thomas, and Sven Tackenberg. “Smart Production - A Paradigm-Shift
in the Field of Maintenance.” Production Engineering and Management, edited
by Franz-Josef Villmer et al., no. 1, 2018, pp. 245–55.
short: 'T. Glatzel, S. Tackenberg, in: F.-J. Villmer, E. Padoano, Department of
Production Engineering and Management (Eds.), Production Engineering and Management,
Lemgo, 2018, pp. 245–255.'
ufg: 'Glatzel, Thomas/Tackenberg, Sven (2018): Smart Production - A Paradigm-Shift
in the Field of Maintenance, in: Franz-Josef Villmer et. al. (Hgg.): Production
Engineering and Management, Lemgo, S. 245–255.'
van: 'Glatzel T, Tackenberg S. Smart Production - A Paradigm-Shift in the Field
of Maintenance. In: Villmer F-J, Padoano E, Department of Production Engineering
and Management, editors. Production Engineering and Management. Lemgo; 2018. p.
245–55.'
conference:
end_date: 2018-10-05
location: Lemgo
name: Proceedings 8th International Conference
start_date: 2018-10-04
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-13T16:11:29Z
date_updated: 2023-03-15T13:50:00Z
department:
- _id: DEP7020
- _id: DEP1305
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
issue: '1'
keyword:
- Maintenance 4.0
- Smart production
- Maintenance check
- Maintenance maturity
language:
- iso: eng
page: 245-255
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-946856-03-0
publication_status: published
status: public
title: Smart Production - A Paradigm-Shift in the Field of Maintenance
type: conference
user_id: '74004'
year: 2018
...
---
_id: '265'
abstract:
- lang: eng
text: The maintenance of a tool for injection molding or forming is usually accompanied
by its disassembly and assembly. The duration of the assembly activities is often
a large part of the total activity time for the maintenance of the tool. The degree
of performance of the employees in the execution of these disassembly and assembly
activities is often low. In addition, allowances occur (e.g. searching for work
equipment). At the Industrial Engineering Lab of the Ostwestfalen-Lippe University
of Applied Sciences, a prototype of an assistance system was developed to support
the assembly activities in toolmaking. With the help of this system, the operator
is guided step by step through the assembly process. The economic potential of
the system exists in the reduction of training times, the avoidance of assembly
errors and the increase of labor productivity.
author:
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Daniel
full_name: Riediger, Daniel
id: '52263'
last_name: Riediger
- first_name: Alexander
full_name: Unrau, Alexander
id: '64690'
last_name: Unrau
citation:
ama: 'Hinrichsen S, Riediger D, Unrau A. Development of a Projection-Based Assistance
System for Maintaining Injection Molding Tools. In: IEEE/ IEEM, ed. 2017 IEEE
International Conference on Industrial Engineering and Engineering Management
(IEEM). Danvers; 2017:1571-1575. doi:https://doi.org/10.1109/IEEM.2017.8290157'
apa: Hinrichsen, S., Riediger, D., & Unrau, A. (2017). Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools. In IEEE/ IEEM (Ed.),
2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM) (pp. 1571–1575). Danvers. https://doi.org/10.1109/IEEM.2017.8290157
bjps: Hinrichsen S, Riediger D and Unrau A (2017) Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools. In IEEE/ IEEM (ed.),
2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM). Danvers, pp. 1571–1575.
chicago: Hinrichsen, Sven, Daniel Riediger, and Alexander Unrau. “Development of
a Projection-Based Assistance System for Maintaining Injection Molding Tools.”
In 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM), edited by IEEE/ IEEM, 1571–75. Danvers, 2017. https://doi.org/10.1109/IEEM.2017.8290157.
chicago-de: 'Hinrichsen, Sven, Daniel Riediger und Alexander Unrau. 2017. Development
of a Projection-Based Assistance System for Maintaining Injection Molding Tools.
In: 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM), hg. von IEEE/ IEEM, 1571–1575. Danvers. doi:https://doi.org/10.1109/IEEM.2017.8290157,
.'
din1505-2-1: 'Hinrichsen, Sven ; Riediger, Daniel ; Unrau,
Alexander: Development of a Projection-Based Assistance System for Maintaining
Injection Molding Tools. In: IEEE/ IEEM
(Hrsg.): 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM). Danvers, 2017, S. 1571–1575'
havard: 'S. Hinrichsen, D. Riediger, A. Unrau, Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools, in: IEEE/ IEEM (Ed.),
2017 IEEE International Conference on Industrial Engineering and Engineering Management
(IEEM), Danvers, 2017: pp. 1571–1575.'
ieee: S. Hinrichsen, D. Riediger, and A. Unrau, “Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools,” in 2017 IEEE International
Conference on Industrial Engineering and Engineering Management (IEEM), Singapore,
2017, no. 1, pp. 1571–1575.
mla: Hinrichsen, Sven, et al. “Development of a Projection-Based Assistance System
for Maintaining Injection Molding Tools.” 2017 IEEE International Conference
on Industrial Engineering and Engineering Management (IEEM), edited by IEEE/
IEEM, no. 1, 2017, pp. 1571–75, doi:https://doi.org/10.1109/IEEM.2017.8290157.
short: 'S. Hinrichsen, D. Riediger, A. Unrau, in: IEEE/ IEEM (Ed.), 2017 IEEE International
Conference on Industrial Engineering and Engineering Management (IEEM), Danvers,
2017, pp. 1571–1575.'
ufg: 'Hinrichsen, Sven et. al. (2017): Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools, in: IEEE/ IEEM (Hg.):
2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM), Danvers, S. 1571–1575.'
van: 'Hinrichsen S, Riediger D, Unrau A. Development of a Projection-Based Assistance
System for Maintaining Injection Molding Tools. In: IEEE/ IEEM, editor. 2017 IEEE
International Conference on Industrial Engineering and Engineering Management
(IEEM). Danvers; 2017. p. 1571–5.'
conference:
end_date: 2017-12-13
location: Singapore
name: 'IEEE International Conference on Industrial Engineering and Engineering Management '
start_date: 2017-12-10
corporate_editor:
- IEEE/ IEEM
date_created: 2018-11-26T11:59:27Z
date_updated: 2023-03-15T13:49:41Z
ddc:
- '620'
department:
- _id: DEP7020
- _id: DEP1305
doi: https://doi.org/10.1109/IEEM.2017.8290157
issue: '1'
keyword:
- injection moulding
- machine tools
- maintenance engineering
- productivity
- projection-based assistance system
- injection molding tools
- assembly activities
- assembly process
- assembly errors
- tool maintenance
- disassembly activities
- economic potential
- Industrial Engineering Lab
- Ostwestfalen-Lippe University of Applied Sciences
- toolmaking
- Tools
- Injection molding
- Maintenance engineering
- Usability
- Task analysis
- Workstations
- Morphology
- assembly assistance systems
- assistance systems
- maintenance of injection molding tools
- manual assembly
language:
- iso: eng
page: 1571-1575
place: Danvers
publication: 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM)
publication_identifier:
isbn:
- '978-1-5386-0948-4 '
quality_controlled: '1'
status: public
title: Development of a Projection-Based Assistance System for Maintaining Injection
Molding Tools
type: conference
user_id: '74004'
year: 2017
...
---
_id: '4329'
abstract:
- lang: eng
text: The term Industrie 4.0 carries the vision of smart factories, which automatically
adapt to changes and assist the human as much as possible during operation and
maintenance. This includes smart human machine interfaces, which reduce the chances
of errors and help to make the right decisions. This paper presents an approach
to equip the maintenance software running on a tablet PC with augmented reality
functionality to be able to place virtual sticky notes at production modules.
Additionally, these sticky notes are enriched with position information. The central
element of this approach is an ontology-based context-aware framework, which aggregates
and processes data from different sources. As a result, a tablet PC application
was implemented, which allows displaying maintenance information as well as live
plant process data in the form of augmented reality. More than 100 of those sticky
notes can be placed using this system, whereas each note requires a file size
of 12 to 16 kilo bytes. After placing a sticky note, the system recognizes it
even if the camera's position is not exactly the same as during the placing process.
author:
- first_name: Holger
full_name: Flatt, Holger
id: '58494'
last_name: Flatt
- first_name: Nils
full_name: Koch, Nils
last_name: Koch
- first_name: Andrei
full_name: Guenter, Andrei
last_name: Guenter
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
- first_name: Jürgen
full_name: Jasperneite, Jürgen
id: '1899'
last_name: Jasperneite
citation:
ama: 'Flatt H, Koch N, Guenter A, Röcker C, Jasperneite J. A Context-Aware Assistance
System for Maintenance Applications in Smart Factories based on Augmented Reality
and Indoor Localization. In: 2015 IEEE 20th Conference on Emerging Technologies
& Factory Automation (ETFA). New York: IEEE; 2015. doi:10.1109/ETFA.2015.7301586'
apa: 'Flatt, H., Koch, N., Guenter, A., Röcker, C., & Jasperneite, J. (2015).
A Context-Aware Assistance System for Maintenance Applications in Smart Factories
based on Augmented Reality and Indoor Localization. In 2015 IEEE 20th Conference
on Emerging Technologies & Factory Automation (ETFA). New York: IEEE.
https://doi.org/10.1109/ETFA.2015.7301586'
bjps: 'Flatt H et al. (2015) A Context-Aware Assistance System for
Maintenance Applications in Smart Factories Based on Augmented Reality and Indoor
Localization. 2015 IEEE 20th Conference on Emerging Technologies & Factory
Automation (ETFA). New York: IEEE.'
chicago: 'Flatt, Holger, Nils Koch, Andrei Guenter, Carsten Röcker, and Jürgen Jasperneite.
“A Context-Aware Assistance System for Maintenance Applications in Smart Factories
Based on Augmented Reality and Indoor Localization.” In 2015 IEEE 20th Conference
on Emerging Technologies & Factory Automation (ETFA). New York: IEEE,
2015. https://doi.org/10.1109/ETFA.2015.7301586.'
chicago-de: 'Flatt, Holger, Nils Koch, Andrei Guenter, Carsten Röcker und Jürgen
Jasperneite. 2015. A Context-Aware Assistance System for Maintenance Applications
in Smart Factories based on Augmented Reality and Indoor Localization. In:
2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA).
New York: IEEE. doi:10.1109/ETFA.2015.7301586,
.'
din1505-2-1: 'Flatt, Holger ; Koch, Nils ; Guenter,
Andrei ; Röcker, Carsten
; Jasperneite, Jürgen: A Context-Aware
Assistance System for Maintenance Applications in Smart Factories based on Augmented
Reality and Indoor Localization. In: 2015 IEEE 20th Conference on Emerging
Technologies & Factory Automation (ETFA). New York : IEEE, 2015'
havard: 'H. Flatt, N. Koch, A. Guenter, C. Röcker, J. Jasperneite, A Context-Aware
Assistance System for Maintenance Applications in Smart Factories based on Augmented
Reality and Indoor Localization, in: 2015 IEEE 20th Conference on Emerging Technologies
& Factory Automation (ETFA), IEEE, New York, 2015.'
ieee: H. Flatt, N. Koch, A. Guenter, C. Röcker, and J. Jasperneite, “A Context-Aware
Assistance System for Maintenance Applications in Smart Factories based on Augmented
Reality and Indoor Localization,” in 2015 IEEE 20th Conference on Emerging
Technologies & Factory Automation (ETFA), Luxembourg, Luxembourg, 2015.
mla: Flatt, Holger, et al. “A Context-Aware Assistance System for Maintenance Applications
in Smart Factories Based on Augmented Reality and Indoor Localization.” 2015
IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA),
IEEE, 2015, doi:10.1109/ETFA.2015.7301586.
short: 'H. Flatt, N. Koch, A. Guenter, C. Röcker, J. Jasperneite, in: 2015 IEEE
20th Conference on Emerging Technologies & Factory Automation (ETFA), IEEE,
New York, 2015.'
ufg: 'Flatt, Holger et. al. (2015): A Context-Aware Assistance System for
Maintenance Applications in Smart Factories based on Augmented Reality and Indoor
Localization, in: 2015 IEEE 20th Conference on Emerging Technologies &
Factory Automation (ETFA), New York.'
van: 'Flatt H, Koch N, Guenter A, Röcker C, Jasperneite J. A Context-Aware Assistance
System for Maintenance Applications in Smart Factories based on Augmented Reality
and Indoor Localization. In: 2015 IEEE 20th Conference on Emerging Technologies
& Factory Automation (ETFA). New York: IEEE; 2015.'
conference:
end_date: 2015-09-11
location: Luxembourg, Luxembourg
name: 20th Conference on Emerging Technologies & Factory Automation (ETFA)
start_date: 2015-09-08
date_created: 2021-01-08T12:03:42Z
date_updated: 2023-03-15T13:49:52Z
department:
- _id: DEP5023
doi: 10.1109/ETFA.2015.7301586
keyword:
- Maintenance engineering
- Augmented reality
- Context
- Context modelin
- Production facilities
- Cameras
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
place: New York
publication: ' 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation
(ETFA)'
publication_status: published
publisher: IEEE
status: public
title: A Context-Aware Assistance System for Maintenance Applications in Smart Factories
based on Augmented Reality and Indoor Localization
type: conference
user_id: '15514'
year: 2015
...