---
_id: '11997'
abstract:
- lang: eng
text: "In Germany, individuals unable or not yet able to return to the general labor
market due to disabilities are employed in sheltered workshops which are called
WfbM (“Werkstätten für behinderte Menschen”). These organizations are required
to earn the wages for the aforementioned group of people by offering market services.
These services include, in particular, assembly activities. However, WfbM face
the challenge that customer orders tend to become more complex, especially as
a result of an increased number of product variants. This development not only
has an impact on the work in WfbM, but also makes it much more difficult to achieve
the desired inclusion of people with disabilities in the general labor market.
Bearing this in mind, the research question addressed in this article can be stated
as such: How far can the use of an informational assistance system compensate
for performance deficits of people with disabilities in the context of assembly?
The results of the conducted laboratory study show that the implementation of
an assistance system can help to reduce existing barriers and challenges resulting
from the mismatch between requirements of the general labor market and the performance
characteristics of people with cognitive impairments.\r\nPractical Relevance:
For people with disabilities, the use of assistance systems opens up new opportunities
for participation in the general labor market and thus makes an important contribution
to implementing the requirements of the “Bundesteilhabegesetz” (a law to strengthen
participation of people with disabilities in Germany)."
- lang: ger
text: "In Deutschland werden Personen, die aufgrund von Beeinträchtigungen nicht
bzw. noch nicht wieder auf dem allgemeinen Arbeitsmarkt tätig sein können, in
einer „Werkstatt für behinderte Menschen (WfbM)“ beschäftigt. Diese Einrichtungen
müssen die Arbeitsentgelte für den genannten Personenkreis durch am Markt angebotene
Leistungen selbst erwirtschaften. Zu diesen Leistungen zählen vor allem Montagetätigkeiten.
Allerdings stehen WfbM vor der Herausforderung, dass Kundenaufträge insbesondere
infolge einer gestiegenen Variantenvielfalt tendenziell komplexer werden. Diese
Entwicklung wirkt sich nicht nur auf die Arbeit in den Werkstätten aus, sondern
hat auch zur Folge, dass die angestrebte Inklusion von Personen mit Unterstützungsbedarfen
in den allgemeinen Arbeitsmarkt deutlich erschwert wird. Vor diesem Hintergrund
wird in dem Beitrag der Forschungsfrage nachgegangen, inwieweit der Einsatz eines
informatorischen Assistenzsystems Leistungsdefizite von Personen mit Unterstützungsbedarfen
im Kontext der Montage ausgleichen kann. Die Ergebnisse der durchgeführten Laborstudie
zeigen, dass die Einführung eines Assistenzsystems dazu beitragen kann, bestehende
Barrieren, die sich aus der Inkongruenz zwischen den Anforderungen des allgemeinen
Arbeitsmarktes und den Leistungsmerkmalen von Personen mit kognitiven Beeinträchtigungen
ergeben, abzubauen.\r\n\r\nPraktische Relevanz: Der Einsatz von informatorischen
Assistenzsystemen kann Personen mit Unterstützungsbedarfen eine Teilhabe am Arbeitsleben
ermöglichen und leistet damit einen wichtigen Beitrag zur Umsetzung des Bundesteilhabegesetzes."
article_type: review
author:
- first_name: Sven
full_name: Bendzioch, Sven
id: '71395'
last_name: Bendzioch
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
citation:
ama: Bendzioch S, Hinrichsen S. Potentials of an informational assembly assistance
system for persons with cognitive disabilities — Results of a laboratory study.
Zeitschrift für Arbeitswissenschaft (ZfA). 2024;78(2):240-253. doi:10.1007/s41449-024-00414-9
apa: Bendzioch, S., & Hinrichsen, S. (2024). Potentials of an informational
assembly assistance system for persons with cognitive disabilities — Results of
a laboratory study. Zeitschrift Für Arbeitswissenschaft (ZfA), 78(2),
240–253. https://doi.org/10.1007/s41449-024-00414-9
bjps: Bendzioch S and Hinrichsen S (2024) Potentials of an Informational
Assembly Assistance System for Persons with Cognitive Disabilities — Results of
a Laboratory Study. Zeitschrift für Arbeitswissenschaft (ZfA) 78,
240–253.
chicago: 'Bendzioch, Sven, and Sven Hinrichsen. “Potentials of an Informational
Assembly Assistance System for Persons with Cognitive Disabilities — Results of
a Laboratory Study.” Zeitschrift Für Arbeitswissenschaft (ZfA) 78, no.
2 (2024): 240–53. https://doi.org/10.1007/s41449-024-00414-9.'
chicago-de: 'Bendzioch, Sven und Sven Hinrichsen. 2024. Potentials of an informational
assembly assistance system for persons with cognitive disabilities — Results of
a laboratory study. Zeitschrift für Arbeitswissenschaft (ZfA) 78, Nr. 2:
240–253. doi:10.1007/s41449-024-00414-9,
.'
din1505-2-1: 'Bendzioch, Sven ; Hinrichsen, Sven: Potentials of an informational
assembly assistance system for persons with cognitive disabilities — Results of
a laboratory study. In: Zeitschrift für Arbeitswissenschaft (ZfA) Bd. 78.
Heidelberg, Springer-Verlag GmbH (2024), Nr. 2, S. 240–253'
havard: S. Bendzioch, S. Hinrichsen, Potentials of an informational assembly assistance
system for persons with cognitive disabilities — Results of a laboratory study,
Zeitschrift Für Arbeitswissenschaft (ZfA). 78 (2024) 240–253.
ieee: 'S. Bendzioch and S. Hinrichsen, “Potentials of an informational assembly
assistance system for persons with cognitive disabilities — Results of a laboratory
study,” Zeitschrift für Arbeitswissenschaft (ZfA), vol. 78, no. 2, pp.
240–253, 2024, doi: 10.1007/s41449-024-00414-9.'
mla: Bendzioch, Sven, and Sven Hinrichsen. “Potentials of an Informational Assembly
Assistance System for Persons with Cognitive Disabilities — Results of a Laboratory
Study.” Zeitschrift Für Arbeitswissenschaft (ZfA), vol. 78, no. 2, 2024,
pp. 240–53, https://doi.org/10.1007/s41449-024-00414-9.
short: S. Bendzioch, S. Hinrichsen, Zeitschrift Für Arbeitswissenschaft (ZfA) 78
(2024) 240–253.
ufg: 'Bendzioch, Sven/Hinrichsen, Sven: Potentials of an informational assembly
assistance system for persons with cognitive disabilities — Results of a laboratory
study, in: Zeitschrift für Arbeitswissenschaft (ZfA) 78 (2024), H. 2,
S. 240–253.'
van: Bendzioch S, Hinrichsen S. Potentials of an informational assembly assistance
system for persons with cognitive disabilities — Results of a laboratory study.
Zeitschrift für Arbeitswissenschaft (ZfA). 2024;78(2):240–53.
date_created: 2024-10-17T10:43:31Z
date_updated: 2026-01-09T07:39:04Z
department:
- _id: DEP7020
- _id: DEP1305
doi: 10.1007/s41449-024-00414-9
intvolume: ' 78'
issue: '2'
keyword:
- Informational Assistance System
- People with Disabilities
- Manual Assembly
- Image Processing System
- Laboratory Study
language:
- iso: eng
page: 240-253
place: Heidelberg
publication: Zeitschrift für Arbeitswissenschaft (ZfA)
publication_identifier:
eissn:
- 2366-4681
issn:
- 0340-2444
publication_status: published
publisher: 'Springer-Verlag GmbH '
quality_controlled: '1'
status: public
title: Potentials of an informational assembly assistance system for persons with
cognitive disabilities — Results of a laboratory study
type: scientific_journal_article
user_id: '49010'
volume: 78
year: '2024'
...
---
_id: '10782'
abstract:
- lang: eng
text: With the trend towards shorter product lifecycles, smaller batch sizes, and
more product variants, the complexity of manual assembly activities is increasing.
To support employees in carrying out complex assembly tasks, the use of assembly
instructions is indispensable to ensure high process capability and work productivity.
However, the creation of assembly instructions is often time-consuming. Thus,
the use of automation approaches can be a way to simplify the creation of assembly
instructions. Therefore, this paper introduces a promising automation concept
for applying robotic process automation (RPA) to generate assembly instructions
automatically. Finally, the automation concept is demonstrated in a practical
use case that illustrates the associated automation potential of RPA.
author:
- first_name: Frederic
full_name: Meyer, Frederic
id: '71656'
last_name: Meyer
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Oliver
full_name: Niggemann, Oliver
id: '10876'
last_name: Niggemann
citation:
ama: Meyer F, Hinrichsen S, Niggemann O. How to Generate Assembly Instructions
with Robotic Process Automation. Vol 111. AHFE International; 2023:629-638.
doi:10.54941/ahfe1004070
apa: 'Meyer, F., Hinrichsen, S., & Niggemann, O. (2023). How to Generate Assembly
Instructions with Robotic Process Automation. In Human Interaction & Emerging
Technologies (IHIET 2023): Artificial Intelligence & Future Applications
(Vol. 111, pp. 629–638). AHFE International. https://doi.org/10.54941/ahfe1004070'
bjps: Meyer F, Hinrichsen S and Niggemann O (2023) How to Generate Assembly
Instructions with Robotic Process Automation. AHFE International.
chicago: 'Meyer, Frederic, Sven Hinrichsen, and Oliver Niggemann. How to Generate
Assembly Instructions with Robotic Process Automation. Human Interaction
& Emerging Technologies (IHIET 2023): Artificial Intelligence & Future
Applications. Vol. 111. Human Interaction and Emerging Technologies (IHIET
2023). AHFE International, 2023. https://doi.org/10.54941/ahfe1004070.'
chicago-de: 'Meyer, Frederic, Sven Hinrichsen und Oliver Niggemann. 2023. How
to Generate Assembly Instructions with Robotic Process Automation. Human
Interaction & Emerging Technologies (IHIET 2023): Artificial Intelligence
& Future Applications. Bd. 111. Human Interaction and Emerging Technologies
(IHIET 2023). AHFE International. doi:10.54941/ahfe1004070,
.'
din1505-2-1: 'Meyer, Frederic ; Hinrichsen, Sven ; Niggemann,
Oliver: How to Generate Assembly Instructions with Robotic Process Automation,
Human Interaction and Emerging Technologies (IHIET 2023). Bd. 111 : AHFE
International, 2023'
havard: F. Meyer, S. Hinrichsen, O. Niggemann, How to Generate Assembly Instructions
with Robotic Process Automation, AHFE International, 2023.
ieee: 'F. Meyer, S. Hinrichsen, and O. Niggemann, How to Generate Assembly Instructions
with Robotic Process Automation, vol. 111. AHFE International, 2023, pp. 629–638.
doi: 10.54941/ahfe1004070.'
mla: 'Meyer, Frederic, et al. “How to Generate Assembly Instructions with Robotic
Process Automation.” Human Interaction & Emerging Technologies (IHIET 2023):
Artificial Intelligence & Future Applications, vol. 111, AHFE International,
2023, pp. 629–38, https://doi.org/10.54941/ahfe1004070.'
short: F. Meyer, S. Hinrichsen, O. Niggemann, How to Generate Assembly Instructions
with Robotic Process Automation, AHFE International, 2023.
ufg: 'Meyer, Frederic/Hinrichsen, Sven/Niggemann, Oliver: How to Generate
Assembly Instructions with Robotic Process Automation, Bd. 111, o. O. 2023 (Human
Interaction and Emerging Technologies (IHIET 2023)).'
van: 'Meyer F, Hinrichsen S, Niggemann O. How to Generate Assembly Instructions
with Robotic Process Automation. Human Interaction & Emerging Technologies
(IHIET 2023): Artificial Intelligence & Future Applications. AHFE International;
2023. (Human Interaction and Emerging Technologies (IHIET 2023); vol. 111).'
conference:
end_date: 2023-08-24
location: NIzza
name: IHIET 2023
start_date: 2023-08-22
date_created: 2023-11-16T11:57:57Z
date_updated: 2023-11-16T11:58:05Z
department:
- _id: DEP7020
- _id: DEP1305
doi: 10.54941/ahfe1004070
intvolume: ' 111'
keyword:
- Digital Assembly Instruction
- Industrial Engineering
- Manual Assembly
- Robotic Process Automation
- RPA
- Work Instruction
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 629-638
publication: 'Human Interaction & Emerging Technologies (IHIET 2023): Artificial Intelligence
& Future Applications'
publication_identifier:
issn:
- 2771-0718
publication_status: published
publisher: AHFE International
quality_controlled: '1'
series_title: Human Interaction and Emerging Technologies (IHIET 2023)
status: public
title: How to Generate Assembly Instructions with Robotic Process Automation
type: conference_editor_article
user_id: '83780'
volume: 111
year: '2023'
...
---
_id: '10783'
abstract:
- lang: eng
text: The development trend in manual assembly towards increasing demands in terms
of quality, variety, and cost pressure makes the transition for people with cognitive
disabilities to the general labor market extremely difficult. Nevertheless, this
employment sector is a central component of many activities in a sheltered workshop.
Therefore, this paper investigates the use of an informational assistance system
for persons with cognitive impairments to close the gap between the characteristics
of this group and the operational requirements. In this way, the transition from
the sheltered workshop to the general labor market will be facilitated and promoted.
author:
- first_name: Sven
full_name: Bendzioch, Sven
id: '71395'
last_name: Bendzioch
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
citation:
ama: Bendzioch S, Hinrichsen S. Informational Assistance System – a Key to Self-Empowerment
of Persons with Cognitive Disabilities in Manual Assembly? Vol 11. AHFE International;
2023:548-556. doi:10.54941/ahfe1004061
apa: 'Bendzioch, S., & Hinrichsen, S. (2023). Informational Assistance System
– a Key to Self-Empowerment of Persons with Cognitive Disabilities in Manual Assembly?
In Human Interaction & Emerging Technologies (IHIET 2023): Artificial Intelligence
& Future Applications (Vol. 11, pp. 548–556). AHFE International. https://doi.org/10.54941/ahfe1004061'
bjps: Bendzioch S and Hinrichsen S (2023) Informational Assistance System
– a Key to Self-Empowerment of Persons with Cognitive Disabilities in Manual Assembly?
AHFE International.
chicago: 'Bendzioch, Sven, and Sven Hinrichsen. Informational Assistance System
– a Key to Self-Empowerment of Persons with Cognitive Disabilities in Manual Assembly?
Human Interaction & Emerging Technologies (IHIET 2023): Artificial Intelligence
& Future Applications. Vol. 11. Human Interaction and Emerging Technologies
(IHIET 2023). AHFE International, 2023. https://doi.org/10.54941/ahfe1004061.'
chicago-de: 'Bendzioch, Sven und Sven Hinrichsen. 2023. Informational Assistance
System – a Key to Self-Empowerment of Persons with Cognitive Disabilities in Manual
Assembly? Human Interaction & Emerging Technologies (IHIET 2023): Artificial
Intelligence & Future Applications. Bd. 11. Human Interaction and Emerging
Technologies (IHIET 2023). AHFE International. doi:10.54941/ahfe1004061,
.'
din1505-2-1: 'Bendzioch, Sven ; Hinrichsen, Sven: Informational Assistance
System – a Key to Self-Empowerment of Persons with Cognitive Disabilities in Manual
Assembly?, Human Interaction and Emerging Technologies (IHIET 2023).
Bd. 11 : AHFE International, 2023'
havard: S. Bendzioch, S. Hinrichsen, Informational Assistance System – a Key to
Self-Empowerment of Persons with Cognitive Disabilities in Manual Assembly?, AHFE
International, 2023.
ieee: 'S. Bendzioch and S. Hinrichsen, Informational Assistance System – a Key
to Self-Empowerment of Persons with Cognitive Disabilities in Manual Assembly?,
vol. 11. AHFE International, 2023, pp. 548–556. doi: 10.54941/ahfe1004061.'
mla: 'Bendzioch, Sven, and Sven Hinrichsen. “Informational Assistance System – a
Key to Self-Empowerment of Persons with Cognitive Disabilities in Manual Assembly?”
Human Interaction & Emerging Technologies (IHIET 2023): Artificial Intelligence
& Future Applications, vol. 11, AHFE International, 2023, pp. 548–56,
https://doi.org/10.54941/ahfe1004061.'
short: S. Bendzioch, S. Hinrichsen, Informational Assistance System – a Key to Self-Empowerment
of Persons with Cognitive Disabilities in Manual Assembly?, AHFE International,
2023.
ufg: 'Bendzioch, Sven/Hinrichsen, Sven: Informational Assistance System –
a Key to Self-Empowerment of Persons with Cognitive Disabilities in Manual Assembly?,
Bd. 11, o. O. 2023 (Human Interaction and Emerging Technologies (IHIET 2023)).'
van: 'Bendzioch S, Hinrichsen S. Informational Assistance System – a Key to Self-Empowerment
of Persons with Cognitive Disabilities in Manual Assembly? Human Interaction &
Emerging Technologies (IHIET 2023): Artificial Intelligence & Future Applications.
AHFE International; 2023. (Human Interaction and Emerging Technologies (IHIET
2023); vol. 11).'
conference:
end_date: 2023-08-24
location: NIzza
name: IHIET 2023
start_date: 2023-08-22
date_created: 2023-11-16T12:05:40Z
date_updated: 2023-11-16T12:05:47Z
department:
- _id: DEP7020
- _id: DEP1305
doi: 10.54941/ahfe1004061
intvolume: ' 11'
keyword:
- Manual Assembly
- Informational Assistance System
- Image Processing System
- People with Disabilities
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 548-556
publication: 'Human Interaction & Emerging Technologies (IHIET 2023): Artificial Intelligence
& Future Applications'
publication_identifier:
issn:
- 2771-0718
publication_status: published
publisher: AHFE International
quality_controlled: '1'
series_title: Human Interaction and Emerging Technologies (IHIET 2023)
status: public
title: Informational Assistance System – a Key to Self-Empowerment of Persons with
Cognitive Disabilities in Manual Assembly?
type: conference_editor_article
user_id: '83780'
volume: 11
year: '2023'
...
---
_id: '7739'
abstract:
- lang: eng
text: Employees in mixed-model assembly perform much informational work by constantly
making decisions about the part to be assembled, the tool to be used or the working
method to be applied. The proportion of informational work in manual assembly
is likely to increase, since more and more products are configured according to
customer demands and additional functions are integrated. Whereas assembly has
so far been understood primarily as energetic work, the informational aspects
of assembly work will have to be considered to a greater extent in the future.
Assembly system design is thus more and more a domain of cognitive ergonomics,
whereas in the past the focus was on biomechanical aspects. Taking this into consideration,
the design of assembly instructions in line with individual requirements is becoming
increasingly important. This article therefore discusses important design principles
of such instructions.
author:
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Dominic
full_name: Bläsing, Dominic
last_name: Bläsing
citation:
ama: Hinrichsen S, Bläsing D. How to Design Assembly Instructions. Vol 23.
(Ahram T, Taiar R, eds.). AHFE Open Access; 2022. doi:10.54941/ahfe100838
apa: 'Hinrichsen, S., & Bläsing, D. (2022). How to Design Assembly Instructions.
In T. Ahram & R. Taiar (Eds.), Human Interaction & Emerging Technologies
(IHIET-AI 2022): Artificial Intelligence & Future Applications (Vol.
23). AHFE Open Access. https://doi.org/10.54941/ahfe100838'
bjps: Hinrichsen S and Bläsing D (2022) How to Design Assembly Instructions,
Ahram T and Taiar R (eds). AHFE Open Access.
chicago: 'Hinrichsen, Sven, and Dominic Bläsing. How to Design Assembly Instructions.
Edited by Tareq Ahram and Redha Taiar. Human Interaction & Emerging Technologies
(IHIET-AI 2022): Artificial Intelligence & Future Applications . Vol.
23. AHFE International. AHFE Open Access, 2022. https://doi.org/10.54941/ahfe100838.'
chicago-de: 'Hinrichsen, Sven und Dominic Bläsing. 2022. How to Design Assembly
Instructions. Hg. von Tareq Ahram und Redha Taiar. Human Interaction
& Emerging Technologies (IHIET-AI 2022): Artificial Intelligence & Future
Applications . Bd. 23. AHFE International. AHFE Open Access. doi:10.54941/ahfe100838,
.'
din1505-2-1: 'Hinrichsen, Sven ; Bläsing, Dominic ; Ahram,
T. ; Taiar, R. (Hrsg.): How
to Design Assembly Instructions, AHFE International. Bd. 23 : AHFE
Open Access, 2022'
havard: S. Hinrichsen, D. Bläsing, How to Design Assembly Instructions, AHFE Open
Access, 2022.
ieee: 'S. Hinrichsen and D. Bläsing, How to Design Assembly Instructions,
vol. 23. AHFE Open Access, 2022. doi: 10.54941/ahfe100838.'
mla: 'Hinrichsen, Sven, and Dominic Bläsing. “How to Design Assembly Instructions.”
Human Interaction & Emerging Technologies (IHIET-AI 2022): Artificial Intelligence
& Future Applications , edited by Tareq Ahram and Redha Taiar, vol.
23, AHFE Open Access, 2022, https://doi.org/10.54941/ahfe100838.'
short: S. Hinrichsen, D. Bläsing, How to Design Assembly Instructions, AHFE Open
Access, 2022.
ufg: 'Hinrichsen, Sven/Bläsing, Dominic: How to Design Assembly Instructions,
Bd. 23, hg. von Ahram, Tareq/Taiar, Redha, o. O. 2022 (AHFE International).'
van: 'Hinrichsen S, Bläsing D. How to Design Assembly Instructions. Ahram T, Taiar
R, editors. Human Interaction & Emerging Technologies (IHIET-AI 2022): Artificial
Intelligence & Future Applications . AHFE Open Access; 2022. (AHFE International;
vol. 23).'
conference:
end_date: 2022-04-23
location: Lausanne
name: '7th International Conference on Human Interaction & Emerging Technologies
(IHIET-AI 2022): Artificial Intelligence & Future Applications'
start_date: 2022-04-21
date_created: 2022-04-22T14:05:18Z
date_updated: 2024-08-08T14:01:39Z
department:
- _id: DEP7020
- _id: DEP1305
doi: 10.54941/ahfe100838
editor:
- first_name: 'Tareq '
full_name: 'Ahram, Tareq '
last_name: Ahram
- first_name: 'Redha '
full_name: 'Taiar, Redha '
last_name: Taiar
intvolume: ' 23'
keyword:
- Assembly Instruction
- Compatibility
- Assistance System Manual Assembly
- Information Management
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
publication: 'Human Interaction & Emerging Technologies (IHIET-AI 2022): Artificial
Intelligence & Future Applications '
publication_identifier:
eisbn:
- 978-1-7923-8989-4
publication_status: published
publisher: AHFE Open Access
quality_controlled: '1'
series_title: AHFE International
status: public
title: How to Design Assembly Instructions
type: conference_editor_article
user_id: '83781'
volume: 23
year: '2022'
...
---
_id: '1903'
abstract:
- lang: eng
text: Because of the trend towards smaller batch sizes and customer-specific products,
employees in assembly have to absorb and process more and more information. With
the help of assistance systems, the process of information absorption and processing
can be designed in a more economical and human-oriented way. Despite the potentials
of such systems, companies pay too little attention to the informational design
of assembly systems, resulting in a number of significant deficits in information
management. To identify such deficits in operational practice, a questionnaire
has been developed. This allows the potential use of informational assistance
systems for an assembly system to be estimated. In this article, results from
an exploratory factor analysis of the developed instrument will be presented and
interpreted as a basis for the further development of the questionnaire.
author:
- first_name: Sven
full_name: Bendzioch, Sven
id: '71395'
last_name: Bendzioch
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Benjamin
full_name: Adrian, Benjamin
id: '42266'
last_name: Adrian
- first_name: Manfred
full_name: Bornewasser, Manfred
last_name: Bornewasser
citation:
ama: 'Bendzioch S, Hinrichsen S, Adrian B, Bornewasser M. Method for Measuring the
Application Potential of Assembly Assistance Systems. In: Nunes IL, ed. Advances
in Human Factors and Systems Interaction AHFE 2019. Vol 959. Advances in Intelligent
Systems and Computing. Cham: Springer; 2020:3-11. doi:https://doi.org/10.1007/978-3-030-20040-4_1'
apa: 'Bendzioch, S., Hinrichsen, S., Adrian, B., & Bornewasser, M. (2020). Method
for Measuring the Application Potential of Assembly Assistance Systems. In I.
L. Nunes (Ed.), Advances in Human Factors and Systems Interaction AHFE 2019
(Vol. 959, pp. 3–11). Cham: Springer. https://doi.org/10.1007/978-3-030-20040-4_1'
bjps: 'Bendzioch S et al. (2020) Method for Measuring the Application
Potential of Assembly Assistance Systems. In Nunes IL (ed.), Advances in Human
Factors and Systems Interaction AHFE 2019, vol. 959. Cham: Springer, pp. 3–11.'
chicago: 'Bendzioch, Sven, Sven Hinrichsen, Benjamin Adrian, and Manfred Bornewasser.
“Method for Measuring the Application Potential of Assembly Assistance Systems.”
In Advances in Human Factors and Systems Interaction AHFE 2019, edited
by Isabel L. Nunes, 959:3–11. Advances in Intelligent Systems and Computing. Cham:
Springer, 2020. https://doi.org/10.1007/978-3-030-20040-4_1.'
chicago-de: 'Bendzioch, Sven, Sven Hinrichsen, Benjamin Adrian und Manfred Bornewasser.
2020. Method for Measuring the Application Potential of Assembly Assistance Systems.
In: Advances in Human Factors and Systems Interaction AHFE 2019, hg. von
Isabel L. Nunes, 959:3–11. Advances in Intelligent Systems and Computing. Cham:
Springer. doi:https://doi.org/10.1007/978-3-030-20040-4_1,
.'
din1505-2-1: 'Bendzioch, Sven ; Hinrichsen, Sven ; Adrian,
Benjamin ; Bornewasser, Manfred:
Method for Measuring the Application Potential of Assembly Assistance Systems.
In: Nunes, I. L. (Hrsg.): Advances
in Human Factors and Systems Interaction AHFE 2019, Advances in Intelligent
Systems and Computing. Bd. 959. Cham : Springer, 2020, S. 3–11'
havard: 'S. Bendzioch, S. Hinrichsen, B. Adrian, M. Bornewasser, Method for Measuring
the Application Potential of Assembly Assistance Systems, in: I.L. Nunes (Ed.),
Advances in Human Factors and Systems Interaction AHFE 2019, Springer, Cham, 2020:
pp. 3–11.'
ieee: S. Bendzioch, S. Hinrichsen, B. Adrian, and M. Bornewasser, “Method for Measuring
the Application Potential of Assembly Assistance Systems,” in Advances in Human
Factors and Systems Interaction AHFE 2019, Washington D.C., USA, 2020, vol.
959, pp. 3–11.
mla: Bendzioch, Sven, et al. “Method for Measuring the Application Potential of
Assembly Assistance Systems.” Advances in Human Factors and Systems Interaction
AHFE 2019, edited by Isabel L. Nunes, vol. 959, Springer, 2020, pp. 3–11,
doi:https://doi.org/10.1007/978-3-030-20040-4_1.
short: 'S. Bendzioch, S. Hinrichsen, B. Adrian, M. Bornewasser, in: I.L. Nunes (Ed.),
Advances in Human Factors and Systems Interaction AHFE 2019, Springer, Cham, 2020,
pp. 3–11.'
ufg: 'Bendzioch, Sven et. al. (2020): Method for Measuring the Application
Potential of Assembly Assistance Systems, in: Isabel L. Nunes (Hg.): Advances
in Human Factors and Systems Interaction AHFE 2019 (=Advances in Intelligent
Systems and Computing 959), Cham, S. 3–11.'
van: 'Bendzioch S, Hinrichsen S, Adrian B, Bornewasser M. Method for Measuring the
Application Potential of Assembly Assistance Systems. In: Nunes IL, editor. Advances
in Human Factors and Systems Interaction AHFE 2019. Cham: Springer; 2020. p. 3–11.
(Advances in Intelligent Systems and Computing; vol. 959).'
conference:
end_date: 2019-07-28
location: Washington D.C., USA
name: 10th International Conference on Applied Human Factors and Ergonomics 2019
start_date: 2019-07-24
date_created: 2019-09-10T06:38:20Z
date_updated: 2023-03-15T13:49:37Z
department:
- _id: DEP7020
- _id: DEP1305
doi: https://doi.org/10.1007/978-3-030-20040-4_1
editor:
- first_name: Isabel L.
full_name: Nunes, Isabel L.
last_name: Nunes
intvolume: ' 959'
keyword:
- Complexity evaluation
- Manual assembly
- Questionnaire
- Work analysis method
- Assistance systems
- Exploratory factor analysis
language:
- iso: eng
page: 3-11
place: Cham
project:
- _id: FBB6D104-44D9-11E9-AA25-B54CDB794CE1
name: Montexas 4.0
publication: Advances in Human Factors and Systems Interaction AHFE 2019
publication_identifier:
eisbn:
- 978-3-030-20040-4
isbn:
- 978-3-030-20039-8
publication_status: published
publisher: Springer
quality_controlled: '1'
series_title: Advances in Intelligent Systems and Computing
status: public
title: Method for Measuring the Application Potential of Assembly Assistance Systems
type: conference
user_id: '49010'
volume: 959
year: 2020
...
---
_id: '1904'
abstract:
- lang: eng
text: As the number of variations increases and batch sizes grow smaller, it can
be difficult to fulfill quality and productivity requirements in manual assembly,
as employees must record, process and interpret more information, then convert
that information into action. Conventional instruction manuals in the form of
text, tables or drawings quickly reach their limits. Innovative assistance systems
are essential for keeping up with these changes, as they instruct and support
employees in line with their specific situations. The goal of this article is
to use a case study to illustrate the problems with providing information in manual
assembly, and to suggest a potential solution in the form of an informational
assistance system. The company considered in the case study stands out for its
large production areas where complex, customer-specific truck bodies are mounted
manually.
author:
- first_name: Alexander
full_name: Nikolenko, Alexander
id: '71431'
last_name: Nikolenko
- first_name: Philip
full_name: Sehr, Philip
id: '71582'
last_name: Sehr
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Sven
full_name: Bendzioch, Sven
id: '71395'
last_name: Bendzioch
citation:
ama: 'Nikolenko A, Sehr P, Hinrichsen S, Bendzioch S. Digital Assembly Assistance
Systems – A Case Study. In: Nunes IL, ed. Advances in Human Factors and Systems
Interaction AHFE 2019. Vol 959. Advances in Human Factors and Systems Interaction.
Cham: Springer; 2020:24-33. doi:https://doi.org/10.1007/978-3-030-20040-4_3'
apa: 'Nikolenko, A., Sehr, P., Hinrichsen, S., & Bendzioch, S. (2020). Digital
Assembly Assistance Systems – A Case Study. In I. L. Nunes (Ed.), Advances
in Human Factors and Systems Interaction AHFE 2019 (Vol. 959, pp. 24–33).
Cham: Springer. https://doi.org/10.1007/978-3-030-20040-4_3'
bjps: 'Nikolenko A et al. (2020) Digital Assembly Assistance Systems
– A Case Study. In Nunes IL (ed.), Advances in Human Factors and Systems Interaction
AHFE 2019, vol. 959. Cham: Springer, pp. 24–33.'
chicago: 'Nikolenko, Alexander, Philip Sehr, Sven Hinrichsen, and Sven Bendzioch.
“Digital Assembly Assistance Systems – A Case Study.” In Advances in Human
Factors and Systems Interaction AHFE 2019, edited by Isabel L. Nunes, 959:24–33.
Advances in Human Factors and Systems Interaction. Cham: Springer, 2020. https://doi.org/10.1007/978-3-030-20040-4_3.'
chicago-de: 'Nikolenko, Alexander, Philip Sehr, Sven Hinrichsen und Sven Bendzioch.
2020. Digital Assembly Assistance Systems – A Case Study. In: Advances in Human
Factors and Systems Interaction AHFE 2019, hg. von Isabel L. Nunes, 959:24–33.
Advances in Human Factors and Systems Interaction. Cham: Springer. doi:https://doi.org/10.1007/978-3-030-20040-4_3,
.'
din1505-2-1: 'Nikolenko, Alexander
; Sehr, Philip ; Hinrichsen,
Sven ; Bendzioch, Sven: Digital
Assembly Assistance Systems – A Case Study. In: Nunes,
I. L. (Hrsg.): Advances in Human Factors and Systems Interaction AHFE
2019, Advances in Human Factors and Systems Interaction. Bd. 959. Cham :
Springer, 2020, S. 24–33'
havard: 'A. Nikolenko, P. Sehr, S. Hinrichsen, S. Bendzioch, Digital Assembly Assistance
Systems – A Case Study, in: I.L. Nunes (Ed.), Advances in Human Factors and Systems
Interaction AHFE 2019, Springer, Cham, 2020: pp. 24–33.'
ieee: A. Nikolenko, P. Sehr, S. Hinrichsen, and S. Bendzioch, “Digital Assembly
Assistance Systems – A Case Study,” in Advances in Human Factors and Systems
Interaction AHFE 2019, Washington D.C., USA, 2020, vol. 959, pp. 24–33.
mla: Nikolenko, Alexander, et al. “Digital Assembly Assistance Systems – A Case
Study.” Advances in Human Factors and Systems Interaction AHFE 2019, edited
by Isabel L. Nunes, vol. 959, Springer, 2020, pp. 24–33, doi:https://doi.org/10.1007/978-3-030-20040-4_3.
short: 'A. Nikolenko, P. Sehr, S. Hinrichsen, S. Bendzioch, in: I.L. Nunes (Ed.),
Advances in Human Factors and Systems Interaction AHFE 2019, Springer, Cham, 2020,
pp. 24–33.'
ufg: 'Nikolenko, Alexander et. al. (2020): Digital Assembly Assistance Systems
– A Case Study, in: Isabel L. Nunes (Hg.): Advances in Human Factors and Systems
Interaction AHFE 2019 (=Advances in Human Factors and Systems Interaction
959), Cham, S. 24–33.'
van: 'Nikolenko A, Sehr P, Hinrichsen S, Bendzioch S. Digital Assembly Assistance
Systems – A Case Study. In: Nunes IL, editor. Advances in Human Factors and Systems
Interaction AHFE 2019. Cham: Springer; 2020. p. 24–33. (Advances in Human Factors
and Systems Interaction; vol. 959).'
conference:
end_date: 2019-07-28
location: Washington D.C., USA
name: 10th International Conference on Applied Human Factors and Ergonomics 2019
start_date: 2019-07-24
date_created: 2019-09-10T06:58:30Z
date_updated: 2023-03-15T13:49:37Z
department:
- _id: DEP7020
- _id: DEP1305
doi: https://doi.org/10.1007/978-3-030-20040-4_3
editor:
- first_name: Isabel L.
full_name: Nunes, Isabel L.
last_name: Nunes
intvolume: ' 959'
keyword:
- Manual assembly
- Assembly assistance systems
- Industry 4.0
- Information delivery
language:
- iso: eng
page: 24-33
place: Cham
project:
- _id: FBB6D104-44D9-11E9-AA25-B54CDB794CE1
name: Montexas 4.0
publication: Advances in Human Factors and Systems Interaction AHFE 2019
publication_identifier:
eisbn:
- 978-3-030-20040-4
isbn:
- 978-3-030-20039-8
issn:
- 2194-5357
publication_status: published
publisher: Springer
quality_controlled: '1'
series_title: Advances in Human Factors and Systems Interaction
status: public
title: Digital Assembly Assistance Systems – A Case Study
type: conference
user_id: '49010'
volume: 959
year: 2020
...
---
_id: '6884'
abstract:
- lang: eng
text: Product variety and short product life cycles are characteristic features
of modern assembly systems. When variety gets very high, assembly processes usually
become very complex, leading to time losses, human errors, and other negative
impacts of system performance. In order to prevent such performance declines different
informational assistance systems become part of manual assembly systems, offering
additional instructions concerning handling and insertion. Otherwise, such systems
can result in additional cognitive load rather than decreasing it. Using mobile
physiological measures like heart rate variability (HRV) and eye movements just
in time changes of overall cognitive load are detectable. As expected, these data
indicate increases of mental workload when task demands are becoming more complex.
Practical and theoretical concerns, limitations and chances will be discussed.
author:
- first_name: Dominic
full_name: Bläsing, Dominic
last_name: Bläsing
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Manfred
full_name: Bornewasser, Manfred
last_name: Bornewasser
citation:
ama: 'Bläsing D, Hinrichsen S, Bornewasser M. Reduction of Cognitive Load in Complex
Assembly Systems. In: Ahram T, Taiar R, Gremeaux-Bader V, Aminian K, eds. Advances
in Intelligent Systems and Computing. Advances in Intelligent Systems and
Computing. Cham: Springer; 2020:495-500. doi:10.1007/978-3-030-44267-5_75'
apa: 'Bläsing, D., Hinrichsen, S., & Bornewasser, M. (2020). Reduction of Cognitive
Load in Complex Assembly Systems. In T. Ahram , R. Taiar, V. Gremeaux-Bader ,
& K. Aminian (Eds.), Advances in Intelligent Systems and Computing
(pp. 495–500). Cham: Springer. https://doi.org/10.1007/978-3-030-44267-5_75'
bjps: 'Bläsing D, Hinrichsen S and Bornewasser M (2020) Reduction of Cognitive
Load in Complex Assembly Systems. In Ahram T et al. (eds), Advances in Intelligent
Systems and Computing. Cham: Springer, pp. 495–500.'
chicago: 'Bläsing, Dominic, Sven Hinrichsen, and Manfred Bornewasser. “Reduction
of Cognitive Load in Complex Assembly Systems.” In Advances in Intelligent
Systems and Computing, edited by T. Ahram , R. Taiar, V. Gremeaux-Bader ,
and K. Aminian, 495–500. Advances in Intelligent Systems and Computing. Cham:
Springer, 2020. https://doi.org/10.1007/978-3-030-44267-5_75.'
chicago-de: 'Bläsing, Dominic, Sven Hinrichsen und Manfred Bornewasser. 2020. Reduction
of Cognitive Load in Complex Assembly Systems. In: Advances in Intelligent
Systems and Computing, hg. von T. Ahram , R. Taiar, V. Gremeaux-Bader , und
K. Aminian, 495–500. Advances in Intelligent Systems and Computing. Cham: Springer.
doi:10.1007/978-3-030-44267-5_75,
.'
din1505-2-1: 'Bläsing, Dominic ; Hinrichsen, Sven ; Bornewasser,
Manfred: Reduction of Cognitive Load in Complex Assembly Systems. In: Ahram , T. ; Taiar,
R. ; Gremeaux-Bader , V.
; Aminian, K. (Hrsg.): Advances
in Intelligent Systems and Computing, Advances in Intelligent Systems and
Computing. Cham : Springer, 2020, S. 495–500'
havard: 'D. Bläsing, S. Hinrichsen, M. Bornewasser, Reduction of Cognitive Load
in Complex Assembly Systems, in: T. Ahram , R. Taiar, V. Gremeaux-Bader , K. Aminian
(Eds.), Advances in Intelligent Systems and Computing, Springer, Cham, 2020: pp.
495–500.'
ieee: 'D. Bläsing, S. Hinrichsen, and M. Bornewasser, “Reduction of Cognitive Load
in Complex Assembly Systems,” in Advances in Intelligent Systems and Computing,
T. Ahram , R. Taiar, V. Gremeaux-Bader , and K. Aminian, Eds. Cham: Springer,
2020, pp. 495–500.'
mla: Bläsing, Dominic, et al. “Reduction of Cognitive Load in Complex Assembly Systems.”
Advances in Intelligent Systems and Computing, edited by T. Ahram et al.,
Springer, 2020, pp. 495–500, doi:10.1007/978-3-030-44267-5_75.
short: 'D. Bläsing, S. Hinrichsen, M. Bornewasser, in: T. Ahram , R. Taiar, V. Gremeaux-Bader
, K. Aminian (Eds.), Advances in Intelligent Systems and Computing, Springer,
Cham, 2020, pp. 495–500.'
ufg: 'Bläsing, Dominic et. al. (2020): Reduction of Cognitive Load in Complex
Assembly Systems, in: T. Ahram et. al. (Hgg.): Advances in Intelligent Systems
and Computing (=Advances in Intelligent Systems and Computing), Cham,
S. 495–500.'
van: 'Bläsing D, Hinrichsen S, Bornewasser M. Reduction of Cognitive Load in Complex
Assembly Systems. In: Ahram T, Taiar R, Gremeaux-Bader V, Aminian K, editors.
Advances in Intelligent Systems and Computing. Cham: Springer; 2020. p. 495–500.
(Advances in Intelligent Systems and Computing).'
conference:
name: Human Interaction, Emerging Technologies and Future Applications II. IHIET
2020
date_created: 2021-12-13T08:40:06Z
date_updated: 2023-03-15T13:50:08Z
department:
- _id: DEP7020
- _id: DEP1305
doi: 10.1007/978-3-030-44267-5_75
editor:
- first_name: T.
full_name: Ahram , T.
last_name: 'Ahram '
- first_name: R.
full_name: Taiar, R.
last_name: Taiar
- first_name: V.
full_name: Gremeaux-Bader , V.
last_name: 'Gremeaux-Bader '
- first_name: K.
full_name: Aminian, K.
last_name: Aminian
keyword:
- Assembly assistance systems
- Manual assembly
- Cognitive load
- Physiological measurement
- Heart rate variability
language:
- iso: eng
page: 495 - 500
place: Cham
project:
- _id: FBB6D104-44D9-11E9-AA25-B54CDB794CE1
name: Montexas 4.0
publication: Advances in Intelligent Systems and Computing
publication_identifier:
isbn:
- '9783030442668'
- '9783030442675'
issn:
- 2194-5357
- 2194-5365
publication_status: published
publisher: Springer
quality_controlled: '1'
series_title: Advances in Intelligent Systems and Computing
status: public
title: Reduction of Cognitive Load in Complex Assembly Systems
type: book_chapter
user_id: '49010'
year: 2020
...
---
_id: '6916'
author:
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Benjamin
full_name: Adrian, Benjamin
id: '42266'
last_name: Adrian
- first_name: Manfred
full_name: Bornewasser, Manfred
last_name: Bornewasser
citation:
ama: 'Hinrichsen S, Adrian B, Bornewasser M. Information Management Strategies
in Manual Assembly. Vol 1152. (Ahram T, Taiar R, Gremeaux-Bader V, Aminian
K, eds.). Cham: Springer; 2020:520-525. doi:10.1007/978-3-030-44267-5_78'
apa: 'Hinrichsen, S., Adrian, B., & Bornewasser, M. (2020). Information Management
Strategies in Manual Assembly. (T. Ahram, R. Taiar , V. Gremeaux-Bader, &
K. Aminian, Eds.), Human Interaction, Emerging Technologies and Future Applications
II : Proceedings of the 2nd International Conference on Human Interaction and
Emerging Technologies: Future Applications (IHIET – AI 2020) (Vol. 1152, pp.
520–525). Cham: Springer. https://doi.org/10.1007/978-3-030-44267-5_78'
bjps: 'Hinrichsen S, Adrian B and Bornewasser M (2020) Information Management
Strategies in Manual Assembly, Ahram T et al. (eds). Cham: Springer.'
chicago: 'Hinrichsen, Sven, Benjamin Adrian, and Manfred Bornewasser. Information
Management Strategies in Manual Assembly. Edited by T. Ahram, R. Taiar , V.
Gremeaux-Bader, and K. Aminian. Human Interaction, Emerging Technologies and
Future Applications II : Proceedings of the 2nd International Conference on Human
Interaction and Emerging Technologies: Future Applications (IHIET – AI 2020).
Vol. 1152. Advances in Intelligent Systems and Computing. Cham: Springer, 2020.
https://doi.org/10.1007/978-3-030-44267-5_78.'
chicago-de: 'Hinrichsen, Sven, Benjamin Adrian und Manfred Bornewasser. 2020. Information
Management Strategies in Manual Assembly. Hg. von T. Ahram, R. Taiar , V.
Gremeaux-Bader, und K. Aminian. Human Interaction, Emerging Technologies and
Future Applications II : Proceedings of the 2nd International Conference on Human
Interaction and Emerging Technologies: Future Applications (IHIET – AI 2020).
Bd. 1152. Advances in Intelligent Systems and Computing. Cham: Springer. doi:10.1007/978-3-030-44267-5_78,
.'
din1505-2-1: 'Hinrichsen, Sven ; Adrian, Benjamin ; Bornewasser,
Manfred ; Ahram, T. ; Taiar , R. ; Gremeaux-Bader,
V. ; Aminian, K. (Hrsg.):
Information Management Strategies in Manual Assembly, Advances in Intelligent
Systems and Computing. Bd. 1152. Cham : Springer, 2020'
havard: S. Hinrichsen, B. Adrian, M. Bornewasser, Information Management Strategies
in Manual Assembly, Springer, Cham, 2020.
ieee: 'S. Hinrichsen, B. Adrian, and M. Bornewasser, Information Management Strategies
in Manual Assembly, vol. 1152. Cham: Springer, 2020, pp. 520–525.'
mla: 'Hinrichsen, Sven, et al. “Information Management Strategies in Manual Assembly.”
Human Interaction, Emerging Technologies and Future Applications II : Proceedings
of the 2nd International Conference on Human Interaction and Emerging Technologies:
Future Applications (IHIET – AI 2020), edited by T. Ahram et al., vol. 1152,
Springer, 2020, pp. 520–25, doi:10.1007/978-3-030-44267-5_78.'
short: S. Hinrichsen, B. Adrian, M. Bornewasser, Information Management Strategies
in Manual Assembly, Springer, Cham, 2020.
ufg: 'Hinrichsen, Sven et. al. (2020): Information Management Strategies
in Manual Assembly (=Advances in Intelligent Systems and Computing 1152),
Cham.'
van: 'Hinrichsen S, Adrian B, Bornewasser M. Information Management Strategies in
Manual Assembly. Ahram T, Taiar R, Gremeaux-Bader V, Aminian K, editors. Human
Interaction, Emerging Technologies and Future Applications II : Proceedings of
the 2nd International Conference on Human Interaction and Emerging Technologies:
Future Applications (IHIET – AI 2020). Cham: Springer; 2020. (Advances in Intelligent
Systems and Computing; vol. 1152).'
conference:
end_date: 2020-04-25
location: Lausanne, Switzerland
name: '2nd International Conference on Human Interaction and Emerging Technologies:
Future Applications (IHIET – AI 2020)'
start_date: 2020-04-23
date_created: 2021-12-21T15:57:56Z
date_updated: 2023-03-15T13:50:08Z
department:
- _id: DEP7020
- _id: DEP1305
doi: 10.1007/978-3-030-44267-5_78
editor:
- first_name: T.
full_name: Ahram, T.
last_name: Ahram
- first_name: R.
full_name: Taiar , R.
last_name: 'Taiar '
- first_name: V.
full_name: Gremeaux-Bader, V.
last_name: Gremeaux-Bader
- first_name: K.
full_name: Aminian, K.
last_name: Aminian
intvolume: ' 1152'
keyword:
- Manual assembly
- Complexity
- Information management
language:
- iso: eng
page: 520-525
place: Cham
project:
- _id: FBB6D104-44D9-11E9-AA25-B54CDB794CE1
name: Montexas 4.0
publication: 'Human Interaction, Emerging Technologies and Future Applications II
: Proceedings of the 2nd International Conference on Human Interaction and Emerging
Technologies: Future Applications (IHIET – AI 2020)'
publication_identifier:
eisbn:
- 978-3-030-44267-5
eissn:
- 2194-5365
isbn:
- 978-3-030-44266-8
issn:
- 2194-5357
publication_status: published
publisher: Springer
quality_controlled: '1'
series_title: Advances in Intelligent Systems and Computing
status: public
title: Information Management Strategies in Manual Assembly
type: conference_editor_article
user_id: '74004'
volume: 1152
year: 2020
...
---
_id: '6918'
abstract:
- lang: eng
text: Manual assembly is shaped by increasing product complexity with higher scope
of work and fluctuating demands. To cope with these changes, employees need to
collect and process more information. Companies, therefore, face a wide range
of challenges, particularly in terms of information supply. Informational assistance
systems provide employees with cognitive support, helping to manage complexity.
To evaluate the potentials of such systems a laboratory study is accomplished
at the Laboratory for Industrial Engineering of the Ostwestfalen-Lippe University
of Applied Sciences and Arts. In this paper, selected results of the laboratory
study are presented and recommendations for a configuration of assembly assistance
systems are derived from the results.
author:
- first_name: Sven
full_name: Bendzioch, Sven
id: '71395'
last_name: Bendzioch
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
citation:
ama: 'Bendzioch S, Hinrichsen S. How to Configure Assembly Assistance Systems –
Results of a Laboratory Study. In: Nunes I, ed. Advances in Intelligent Systems
and Computing. Vol 1207. Cham: Springer; 2020:25-31. doi:10.1007/978-3-030-51369-6_4'
apa: 'Bendzioch, S., & Hinrichsen, S. (2020). How to Configure Assembly Assistance
Systems – Results of a Laboratory Study. In I. Nunes (Ed.), Advances in Intelligent
Systems and Computing (Vol. 1207, pp. 25–31). Cham: Springer. https://doi.org/10.1007/978-3-030-51369-6_4'
bjps: 'Bendzioch S and Hinrichsen S (2020) How to Configure Assembly Assistance
Systems – Results of a Laboratory Study. In Nunes I (ed.), Advances in Intelligent
Systems and Computing, vol. 1207. Cham: Springer, pp. 25–31.'
chicago: 'Bendzioch, Sven, and Sven Hinrichsen. “How to Configure Assembly Assistance
Systems – Results of a Laboratory Study.” In Advances in Intelligent Systems
and Computing, edited by I. Nunes, 1207:25–31. Cham: Springer, 2020. https://doi.org/10.1007/978-3-030-51369-6_4.'
chicago-de: 'Bendzioch, Sven und Sven Hinrichsen. 2020. How to Configure Assembly
Assistance Systems – Results of a Laboratory Study. In: Advances in Intelligent
Systems and Computing, hg. von I. Nunes, 1207:25–31. Cham: Springer. doi:10.1007/978-3-030-51369-6_4,
.'
din1505-2-1: 'Bendzioch, Sven ; Hinrichsen, Sven: How to Configure Assembly
Assistance Systems – Results of a Laboratory Study. In: Nunes,
I. (Hrsg.): Advances in Intelligent Systems and Computing. Bd. 1207.
Cham : Springer, 2020, S. 25–31'
havard: 'S. Bendzioch, S. Hinrichsen, How to Configure Assembly Assistance Systems
– Results of a Laboratory Study, in: I. Nunes (Ed.), Advances in Intelligent Systems
and Computing, Springer, Cham, 2020: pp. 25–31.'
ieee: 'S. Bendzioch and S. Hinrichsen, “How to Configure Assembly Assistance Systems
– Results of a Laboratory Study,” in Advances in Intelligent Systems and Computing,
vol. 1207, I. Nunes, Ed. Cham: Springer, 2020, pp. 25–31.'
mla: Bendzioch, Sven, and Sven Hinrichsen. “How to Configure Assembly Assistance
Systems – Results of a Laboratory Study.” Advances in Intelligent Systems and
Computing, edited by I. Nunes, vol. 1207, Springer, 2020, pp. 25–31, doi:10.1007/978-3-030-51369-6_4.
short: 'S. Bendzioch, S. Hinrichsen, in: I. Nunes (Ed.), Advances in Intelligent
Systems and Computing, Springer, Cham, 2020, pp. 25–31.'
ufg: 'Bendzioch, Sven/Hinrichsen, Sven (2020): How to Configure Assembly
Assistance Systems – Results of a Laboratory Study, in: I. Nunes (Hg.): Advances
in Intelligent Systems and Computing (= 1207), Cham, S. 25–31.'
van: 'Bendzioch S, Hinrichsen S. How to Configure Assembly Assistance Systems –
Results of a Laboratory Study. In: Nunes I, editor. Advances in Intelligent Systems
and Computing. Cham: Springer; 2020. p. 25–31.'
conference:
name: Advances in Human Factors and Systems Interaction (AHFE 2020)
date_created: 2021-12-21T16:38:13Z
date_updated: 2023-03-15T13:50:08Z
department:
- _id: DEP7020
- _id: DEP1305
doi: 10.1007/978-3-030-51369-6_4
editor:
- first_name: I.
full_name: Nunes, I.
last_name: Nunes
intvolume: ' 1207'
keyword:
- Informational assistance systems
- Manual assembly
- Human-machine interaction
- Laboratory studies
language:
- iso: eng
page: 25-31
place: Cham
project:
- _id: FBB6D104-44D9-11E9-AA25-B54CDB794CE1
name: Montexas 4.0
publication: Advances in Intelligent Systems and Computing
publication_identifier:
isbn:
- '9783030513689'
- '9783030513696'
issn:
- 2194-5357
- 2194-5365
publication_status: published
publisher: Springer
quality_controlled: '1'
status: public
title: How to Configure Assembly Assistance Systems – Results of a Laboratory Study
type: book_chapter
user_id: '49010'
volume: 1207
year: 2020
...
---
_id: '7017'
abstract:
- lang: eng
text: The task of shop floor management is to ensure high effectiveness and efficiency
of a production system. The objective of this paper is to identify potentials
for improvement of shop floor management in the context of digitalization and
to identify fields of action. As a result, the paper shows four categories of
deficits in shop floor management, respectively information management. First,
insufficiently designed business processes lead to additional administrative work
for shop floor managers. Second, shop floor management can be strengthened by
improving e-mail communication. Third, the meeting organization and fourth, the
reporting offer potential for improvement. The creation of reports and the preparation
of key figures, for example, involve routine activities that do not add value
and can be partially automated. Therefore, as part of the project, a shop floor
board was prototypically developed using a low-code development platform in order
to demonstrate the potential of this approach.
author:
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Benjamin
full_name: Adrian, Benjamin
id: '42266'
last_name: Adrian
- first_name: Andreas
full_name: Schulz, Andreas
id: '65032'
last_name: Schulz
citation:
ama: 'Hinrichsen S, Adrian B, Schulz A. Approaches to Improve Shop Floor Management.
In: Ahram T, Taiar R, Langlois K, Choplin A, eds. Human Interaction, Emerging
Technologies and Future Applications III : Advances in Intelligent Systems and
Computing, Vol 1253. Springer; 2020:415-421. doi:https://doi.org/10.1007/978-3-030-55307-4_63'
apa: 'Hinrichsen, S., Adrian, B., & Schulz, A. (2020). Approaches to Improve
Shop Floor Management. In T. Ahram, R. Taiar, K. Langlois, & A. Choplin (Eds.),
Human Interaction, Emerging Technologies and Future Applications III : Advances
in Intelligent Systems and Computing, vol 1253 (pp. 415–421). Springer. https://doi.org/10.1007/978-3-030-55307-4_63'
bjps: 'Hinrichsen S, Adrian B and Schulz A (2020) Approaches to Improve Shop
Floor Management. In Ahram T et al. (eds), Human Interaction, Emerging Technologies
and Future Applications III : Advances in Intelligent Systems and Computing, Vol
1253. Cham: Springer, pp. 415–421.'
chicago: 'Hinrichsen, Sven, Benjamin Adrian, and Andreas Schulz. “Approaches to
Improve Shop Floor Management.” In Human Interaction, Emerging Technologies
and Future Applications III : Advances in Intelligent Systems and Computing, Vol
1253, edited by T. Ahram, R. Taiar, K. Langlois, and A. Choplin, 415–21. Cham:
Springer, 2020. https://doi.org/10.1007/978-3-030-55307-4_63.'
chicago-de: 'Hinrichsen, Sven, Benjamin Adrian und Andreas Schulz. 2020. Approaches
to Improve Shop Floor Management. In: Human Interaction, Emerging Technologies
and Future Applications III : Advances in Intelligent Systems and Computing, vol
1253, hg. von T. Ahram, R. Taiar, K. Langlois, und A. Choplin, 415–421. Cham:
Springer. doi:https://doi.org/10.1007/978-3-030-55307-4_63,
.'
din1505-2-1: 'Hinrichsen, Sven ; Adrian, Benjamin ; Schulz,
Andreas: Approaches to Improve Shop Floor Management. In: Ahram,
T. ; Taiar, R. ; Langlois,
K. ; Choplin, A. (Hrsg.):
Human Interaction, Emerging Technologies and Future Applications III : Advances
in Intelligent Systems and Computing, vol 1253. Cham : Springer, 2020, S. 415–421'
havard: 'S. Hinrichsen, B. Adrian, A. Schulz, Approaches to Improve Shop Floor Management,
in: T. Ahram, R. Taiar, K. Langlois, A. Choplin (Eds.), Human Interaction, Emerging
Technologies and Future Applications III : Advances in Intelligent Systems and
Computing, Vol 1253, Springer, Cham, 2020: pp. 415–421.'
ieee: 'S. Hinrichsen, B. Adrian, and A. Schulz, “Approaches to Improve Shop Floor
Management,” in Human Interaction, Emerging Technologies and Future Applications
III : Advances in Intelligent Systems and Computing, vol 1253, T. Ahram, R.
Taiar, K. Langlois, and A. Choplin, Eds. Cham: Springer, 2020, pp. 415–421. doi:
https://doi.org/10.1007/978-3-030-55307-4_63.'
mla: 'Hinrichsen, Sven, et al. “Approaches to Improve Shop Floor Management.” Human
Interaction, Emerging Technologies and Future Applications III : Advances in Intelligent
Systems and Computing, Vol 1253, edited by T. Ahram et al., Springer, 2020,
pp. 415–21, https://doi.org/10.1007/978-3-030-55307-4_63.'
short: 'S. Hinrichsen, B. Adrian, A. Schulz, in: T. Ahram, R. Taiar, K. Langlois,
A. Choplin (Eds.), Human Interaction, Emerging Technologies and Future Applications
III : Advances in Intelligent Systems and Computing, Vol 1253, Springer, Cham,
2020, pp. 415–421.'
ufg: 'Hinrichsen, Sven/Adrian, Benjamin/Schulz, Andreas: Approaches to Improve
Shop Floor Management, in: Ahram, T. u. a. (Hgg.): Human Interaction, Emerging
Technologies and Future Applications III : Advances in Intelligent Systems and
Computing, vol 1253, Cham 2020, S. 415–421.'
van: 'Hinrichsen S, Adrian B, Schulz A. Approaches to Improve Shop Floor Management.
In: Ahram T, Taiar R, Langlois K, Choplin A, editors. Human Interaction, Emerging
Technologies and Future Applications III : Advances in Intelligent Systems and
Computing, vol 1253. Cham: Springer; 2020. p. 415–21.'
conference:
location: San Diego
name: IHIET 2020
date_created: 2021-12-21T15:57:56Z
date_updated: 2023-09-08T06:54:57Z
department:
- _id: DEP7020
- _id: DEP1305
doi: https://doi.org/10.1007/978-3-030-55307-4_63
editor:
- first_name: T.
full_name: Ahram, T.
last_name: Ahram
- first_name: R.
full_name: Taiar, R.
last_name: Taiar
- first_name: K.
full_name: Langlois, K.
last_name: Langlois
- first_name: A.
full_name: Choplin, A.
last_name: Choplin
keyword:
- Manual assembly
- Complexity
- Information management
language:
- iso: eng
page: 415 - 421
place: Cham
publication: 'Human Interaction, Emerging Technologies and Future Applications III
: Advances in Intelligent Systems and Computing, vol 1253'
publication_status: published
publisher: Springer
quality_controlled: '1'
status: public
title: Approaches to Improve Shop Floor Management
type: book_chapter
user_id: '83778'
year: '2020'
...
---
_id: '1900'
abstract:
- lang: eng
text: More and more complex products are being fitted in small batches in manual
assembly. Because of this, more information needs to be collected from employees
and implemented in appropriate actions. At the same time, the informational design
of assembly systems often shows deficits in operational practice. Manual assembly
processes can be made more economical, reliable, and human-oriented with the help
of informational assistance systems. Testing was carried out in the Laboratory
for Industrial Engineering at the Ostwestfalen-Lippe University of Applied Sciences
and Arts to verify this potential. Initial results on the use of augmented reality
(AR) glasses in comparison to providing information in a paper-based format are
presented.
author:
- first_name: Sven
full_name: Bendzioch, Sven
id: '71395'
last_name: Bendzioch
- first_name: Dominic
full_name: Bläsing, Dominic
last_name: Bläsing
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
citation:
ama: 'Bendzioch S, Bläsing D, Hinrichsen S. Comparison of Different Assembly Assistance
Systems Under Ergonomic and Economic Aspects. In: Ahram T, Karwowski W, Pickl
S, Taiar R, eds. Human Systems Engineering and Design II Proceedings of the
2nd International Conference on Human Systems Engineering and Design (IHSED2019).
Vol 1026. Advances in Intelligent Systems and Computing. Cham: Springer Nature;
2019:20-25. doi:https://doi.org/10.1007/978-3-030-27928-8_4'
apa: 'Bendzioch, S., Bläsing, D., & Hinrichsen, S. (2019). Comparison of Different
Assembly Assistance Systems Under Ergonomic and Economic Aspects. In T. Ahram,
W. Karwowski, S. Pickl, & R. Taiar (Eds.), Human Systems Engineering and
Design II Proceedings of the 2nd International Conference on Human Systems Engineering
and Design (IHSED2019) (Vol. 1026, pp. 20–25). Cham: Springer Nature. https://doi.org/10.1007/978-3-030-27928-8_4'
bjps: 'Bendzioch S, Bläsing D and Hinrichsen S (2019) Comparison of Different
Assembly Assistance Systems Under Ergonomic and Economic Aspects. In Ahram T et
al. (eds), Human Systems Engineering and Design II Proceedings of the 2nd International
Conference on Human Systems Engineering and Design (IHSED2019), vol. 1026.
Cham: Springer Nature, pp. 20–25.'
chicago: 'Bendzioch, Sven, Dominic Bläsing, and Sven Hinrichsen. “Comparison of
Different Assembly Assistance Systems Under Ergonomic and Economic Aspects.” In
Human Systems Engineering and Design II Proceedings of the 2nd International
Conference on Human Systems Engineering and Design (IHSED2019), edited by
T. Ahram, W. Karwowski, S. Pickl, and R. Taiar, 1026:20–25. Advances in Intelligent
Systems and Computing. Cham: Springer Nature, 2019. https://doi.org/10.1007/978-3-030-27928-8_4.'
chicago-de: 'Bendzioch, Sven, Dominic Bläsing und Sven Hinrichsen. 2019. Comparison
of Different Assembly Assistance Systems Under Ergonomic and Economic Aspects.
In: Human Systems Engineering and Design II Proceedings of the 2nd International
Conference on Human Systems Engineering and Design (IHSED2019), hg. von T.
Ahram, W. Karwowski, S. Pickl, und R. Taiar, 1026:20–25. Advances in Intelligent
Systems and Computing. Cham: Springer Nature. doi:https://doi.org/10.1007/978-3-030-27928-8_4,
.'
din1505-2-1: 'Bendzioch, Sven ; Bläsing, Dominic ; Hinrichsen,
Sven: Comparison of Different Assembly Assistance Systems Under Ergonomic
and Economic Aspects. In: Ahram, T.
; Karwowski, W. ; Pickl,
S. ; Taiar, R. (Hrsg.): Human
Systems Engineering and Design II Proceedings of the 2nd International Conference
on Human Systems Engineering and Design (IHSED2019), Advances in Intelligent
Systems and Computing. Bd. 1026. Cham : Springer Nature, 2019, S. 20–25'
havard: 'S. Bendzioch, D. Bläsing, S. Hinrichsen, Comparison of Different Assembly
Assistance Systems Under Ergonomic and Economic Aspects, in: T. Ahram, W. Karwowski,
S. Pickl, R. Taiar (Eds.), Human Systems Engineering and Design II Proceedings
of the 2nd International Conference on Human Systems Engineering and Design (IHSED2019),
Springer Nature, Cham, 2019: pp. 20–25.'
ieee: S. Bendzioch, D. Bläsing, and S. Hinrichsen, “Comparison of Different Assembly
Assistance Systems Under Ergonomic and Economic Aspects,” in Human Systems
Engineering and Design II Proceedings of the 2nd International Conference on Human
Systems Engineering and Design (IHSED2019), Universität der Bundeswehr, München,
2019, vol. 1026, pp. 20–25.
mla: Bendzioch, Sven, et al. “Comparison of Different Assembly Assistance Systems
Under Ergonomic and Economic Aspects.” Human Systems Engineering and Design
II Proceedings of the 2nd International Conference on Human Systems Engineering
and Design (IHSED2019), edited by T. Ahram et al., vol. 1026, Springer Nature,
2019, pp. 20–25, doi:https://doi.org/10.1007/978-3-030-27928-8_4.
short: 'S. Bendzioch, D. Bläsing, S. Hinrichsen, in: T. Ahram, W. Karwowski, S.
Pickl, R. Taiar (Eds.), Human Systems Engineering and Design II Proceedings of
the 2nd International Conference on Human Systems Engineering and Design (IHSED2019),
Springer Nature, Cham, 2019, pp. 20–25.'
ufg: 'Bendzioch, Sven et. al. (2019): Comparison of Different Assembly Assistance
Systems Under Ergonomic and Economic Aspects, in: T. Ahram et. al. (Hgg.): Human
Systems Engineering and Design II Proceedings of the 2nd International Conference
on Human Systems Engineering and Design (IHSED2019) (=Advances in Intelligent
Systems and Computing 1026), Cham, S. 20–25.'
van: 'Bendzioch S, Bläsing D, Hinrichsen S. Comparison of Different Assembly Assistance
Systems Under Ergonomic and Economic Aspects. In: Ahram T, Karwowski W, Pickl
S, Taiar R, editors. Human Systems Engineering and Design II Proceedings of the
2nd International Conference on Human Systems Engineering and Design (IHSED2019).
Cham: Springer Nature; 2019. p. 20–5. (Advances in Intelligent Systems and Computing;
vol. 1026).'
conference:
end_date: 2019-09-18
location: Universität der Bundeswehr, München
name: '2nd International Conference on Human Systems Engineering and Design (IHSED2019):
Future Trends and Applications'
start_date: 2019-09-16
date_created: 2019-09-10T05:43:27Z
date_updated: 2023-03-15T13:49:37Z
department:
- _id: DEP7020
- _id: DEP1305
doi: https://doi.org/10.1007/978-3-030-27928-8_4
editor:
- first_name: T.
full_name: Ahram, T.
last_name: Ahram
- first_name: W.
full_name: Karwowski, W.
last_name: Karwowski
- first_name: S.
full_name: Pickl, S.
last_name: Pickl
- first_name: R.
full_name: Taiar, R.
last_name: Taiar
intvolume: ' 1026'
keyword:
- Worker assistance system
- Manual assembly
- Human-machine interaction
- Informational complexity
language:
- iso: eng
page: 20-25
place: Cham
project:
- _id: FBB6D104-44D9-11E9-AA25-B54CDB794CE1
name: Montexas 4.0
publication: Human Systems Engineering and Design II Proceedings of the 2nd International
Conference on Human Systems Engineering and Design (IHSED2019)
publication_identifier:
eisbn:
- 978-3-030-27928-8
isbn:
- 978-3-030-27927-1
publication_status: published
publisher: Springer Nature
quality_controlled: '1'
series_title: Advances in Intelligent Systems and Computing
status: public
title: Comparison of Different Assembly Assistance Systems Under Ergonomic and Economic
Aspects
type: conference
user_id: '74004'
volume: 1026
year: 2019
...
---
_id: '1901'
abstract:
- lang: eng
text: 'As customers’ options for configuring products to match their requirements
increase, the number of assembly variants grows. Due to this large number of variants,
assembly processes often cannot be automated in an economical way, and manual
assembly remains highly important. Additional support options must be implemented
to continue completing manual assembly processes reliably in the future. Image
processing systems are one promising approach. The purpose of this paper is to
establish the potential offered by industrial image processing in manual assembly,
building on fundamental concepts, as well as to identify requirements and provide
recommendations for selecting and arranging system components. '
author:
- first_name: Alexander
full_name: Nikolenko, Alexander
id: '71431'
last_name: Nikolenko
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
citation:
ama: 'Nikolenko A, Hinrichsen S. Potential of Industrial Image Processing in Manual
Assembly. In: Ahram T, Karwowski W, Pickl S, Taiar R, eds. Human Systems Engineering
and Design II. IHSED 2019. Advances in Intelligent Systems and Computing.
Vol 1026. Advances in Intelligent Systems and Computing. Cham: Springer Nature;
2019:795-800. doi:https://doi.org/10.1007/978-3-030-27928-8_121'
apa: 'Nikolenko, A., & Hinrichsen, S. (2019). Potential of Industrial Image
Processing in Manual Assembly. In T. Ahram, W. Karwowski, S. Pickl, & R. Taiar
(Eds.), Human Systems Engineering and Design II. IHSED 2019. Advances in Intelligent
Systems and Computing (Vol. 1026, pp. 795–800). Cham: Springer Nature. https://doi.org/10.1007/978-3-030-27928-8_121'
bjps: 'Nikolenko A and Hinrichsen S (2019) Potential of Industrial Image
Processing in Manual Assembly. In Ahram T et al. (eds), Human Systems Engineering
and Design II. IHSED 2019. Advances in Intelligent Systems and Computing,
vol. 1026. Cham: Springer Nature, pp. 795–800.'
chicago: 'Nikolenko, Alexander, and Sven Hinrichsen. “Potential of Industrial Image
Processing in Manual Assembly.” In Human Systems Engineering and Design II.
IHSED 2019. Advances in Intelligent Systems and Computing, edited by T. Ahram,
W. Karwowski, S. Pickl, and R. Taiar, 1026:795–800. Advances in Intelligent Systems
and Computing. Cham: Springer Nature, 2019. https://doi.org/10.1007/978-3-030-27928-8_121.'
chicago-de: 'Nikolenko, Alexander und Sven Hinrichsen. 2019. Potential of Industrial
Image Processing in Manual Assembly. In: Human Systems Engineering and Design
II. IHSED 2019. Advances in Intelligent Systems and Computing, hg. von T.
Ahram, W. Karwowski, S. Pickl, und R. Taiar, 1026:795–800. Advances in Intelligent
Systems and Computing. Cham: Springer Nature. doi:https://doi.org/10.1007/978-3-030-27928-8_121,
.'
din1505-2-1: 'Nikolenko, Alexander
; Hinrichsen, Sven: Potential of
Industrial Image Processing in Manual Assembly. In: Ahram,
T. ; Karwowski, W. ; Pickl, S. ; Taiar,
R. (Hrsg.): Human Systems Engineering and Design II. IHSED 2019. Advances
in Intelligent Systems and Computing, Advances in Intelligent Systems and
Computing. Bd. 1026. Cham : Springer Nature, 2019, S. 795–800'
havard: 'A. Nikolenko, S. Hinrichsen, Potential of Industrial Image Processing in
Manual Assembly, in: T. Ahram, W. Karwowski, S. Pickl, R. Taiar (Eds.), Human
Systems Engineering and Design II. IHSED 2019. Advances in Intelligent Systems
and Computing, Springer Nature, Cham, 2019: pp. 795–800.'
ieee: A. Nikolenko and S. Hinrichsen, “Potential of Industrial Image Processing
in Manual Assembly,” in Human Systems Engineering and Design II. IHSED 2019.
Advances in Intelligent Systems and Computing, Universität der Bundeswehr,
München, 2019, vol. 1026, pp. 795–800.
mla: Nikolenko, Alexander, and Sven Hinrichsen. “Potential of Industrial Image Processing
in Manual Assembly.” Human Systems Engineering and Design II. IHSED 2019. Advances
in Intelligent Systems and Computing, edited by T. Ahram et al., vol. 1026,
Springer Nature, 2019, pp. 795–800, doi:https://doi.org/10.1007/978-3-030-27928-8_121.
short: 'A. Nikolenko, S. Hinrichsen, in: T. Ahram, W. Karwowski, S. Pickl, R. Taiar
(Eds.), Human Systems Engineering and Design II. IHSED 2019. Advances in Intelligent
Systems and Computing, Springer Nature, Cham, 2019, pp. 795–800.'
ufg: 'Nikolenko, Alexander/Hinrichsen, Sven (2019): Potential of Industrial
Image Processing in Manual Assembly, in: T. Ahram et. al. (Hgg.): Human Systems
Engineering and Design II. IHSED 2019. Advances in Intelligent Systems and Computing
(=Advances in Intelligent Systems and Computing 1026), Cham, S. 795–800.'
van: 'Nikolenko A, Hinrichsen S. Potential of Industrial Image Processing in Manual
Assembly. In: Ahram T, Karwowski W, Pickl S, Taiar R, editors. Human Systems Engineering
and Design II IHSED 2019 Advances in Intelligent Systems and Computing. Cham:
Springer Nature; 2019. p. 795–800. (Advances in Intelligent Systems and Computing;
vol. 1026).'
conference:
end_date: 2019-09-18
location: Universität der Bundeswehr, München
name: '2nd International Conference on Human Systems Engineering and Design (IHSED2019):
Future Trends and Applications'
start_date: 2019-09-16
date_created: 2019-09-10T05:52:02Z
date_updated: 2023-03-15T13:49:37Z
department:
- _id: DEP7020
- _id: DEP1305
doi: https://doi.org/10.1007/978-3-030-27928-8_121
editor:
- first_name: T.
full_name: Ahram, T.
last_name: Ahram
- first_name: W.
full_name: Karwowski, W.
last_name: Karwowski
- first_name: S.
full_name: Pickl, S.
last_name: Pickl
- first_name: R.
full_name: Taiar, R.
last_name: Taiar
intvolume: ' 1026'
keyword:
- Industrial image processing
- Manual assembly
- Assistance systems
- Machine vision
language:
- iso: eng
page: 795-800
place: Cham
publication: Human Systems Engineering and Design II. IHSED 2019. Advances in Intelligent
Systems and Computing
publication_identifier:
eisbn:
- 978-3-030-27928-8
isbn:
- 978-3-030-27927-1
publication_status: published
publisher: Springer Nature
quality_controlled: '1'
series_title: Advances in Intelligent Systems and Computing
status: public
title: Potential of Industrial Image Processing in Manual Assembly
type: conference
user_id: '74004'
volume: 1026
year: 2019
...
---
_id: '611'
abstract:
- lang: eng
text: Empirical research shows that the informational design of manual assembly
systems is becoming increasingly important in the light of growing complexity.
Assembly assistance systems supply employees with information according to their
needs and individual situation. This article aims to present important principles
for the design of informational assembly assistance systems. The empirical basis
for these principles is formed by projects involving the introduction of informational
assistance systems for assembly work. The trends and design recommendations are
explained using a model, which illustrates important associations between the
complexity of assembly tasks, the demands on the mental capacity of employees,
work productivity and the use of assembly assistance systems.
author:
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Manfred
full_name: Bornewasser, Manfred
last_name: Bornewasser
citation:
ama: 'Hinrichsen S, Bornewasser M. How to Design Assembly Assistance Systems. In:
Karwowski W, Ahram T, eds. Advances in Intelligent Systems and Computing.
Cham: Springer International Publishing; 2019:286-292. doi:10.1007/978-3-030-11051-2_44'
apa: 'Hinrichsen, S., & Bornewasser, M. (2019). How to Design Assembly Assistance
Systems. In W. Karwowski & T. Ahram (Eds.), Advances in Intelligent Systems
and Computing (pp. 286–292). Cham: Springer International Publishing. https://doi.org/10.1007/978-3-030-11051-2_44'
bjps: 'Hinrichsen S and Bornewasser M (2019) How to Design Assembly Assistance
Systems. In Karwowski W and Ahram T (eds), Advances in Intelligent Systems
and Computing. Cham: Springer International Publishing, pp. 286–292.'
chicago: 'Hinrichsen, Sven, and Manfred Bornewasser. “How to Design Assembly Assistance
Systems.” In Advances in Intelligent Systems and Computing, edited by Waldemar Karwowski
and Tareq Ahram, 286–92. Cham: Springer International Publishing, 2019. https://doi.org/10.1007/978-3-030-11051-2_44.'
chicago-de: 'Hinrichsen, Sven und Manfred Bornewasser. 2019. How to Design Assembly
Assistance Systems. In: Advances in Intelligent Systems and Computing,
hg. von Waldemar Karwowski und Tareq Ahram, 286–292. Cham: Springer International
Publishing. doi:10.1007/978-3-030-11051-2_44,
.'
din1505-2-1: 'Hinrichsen, Sven ; Bornewasser, Manfred: How to Design Assembly
Assistance Systems. In: Karwowski, W.
; Ahram, T. (Hrsg.): Advances
in Intelligent Systems and Computing. Cham : Springer International Publishing,
2019, S. 286–292'
havard: 'S. Hinrichsen, M. Bornewasser, How to Design Assembly Assistance Systems,
in: W. Karwowski, T. Ahram (Eds.), Advances in Intelligent Systems and Computing,
Springer International Publishing, Cham, 2019: pp. 286–292.'
ieee: S. Hinrichsen and M. Bornewasser, “How to Design Assembly Assistance Systems,”
in Advances in Intelligent Systems and Computing, San Diego, USA, 2019,
pp. 286–292.
mla: Hinrichsen, Sven, and Manfred Bornewasser. “How to Design Assembly Assistance
Systems.” Advances in Intelligent Systems and Computing, edited by Waldemar Karwowski
and Tareq Ahram, Springer International Publishing, 2019, pp. 286–92, doi:10.1007/978-3-030-11051-2_44.
short: 'S. Hinrichsen, M. Bornewasser, in: W. Karwowski, T. Ahram (Eds.), Advances
in Intelligent Systems and Computing, Springer International Publishing, Cham,
2019, pp. 286–292.'
ufg: 'Hinrichsen, Sven/Bornewasser, Manfred (2019): How to Design Assembly
Assistance Systems, in: Waldemar Karwowski/Tareq Ahram (Hgg.): Advances in
Intelligent Systems and Computing, Cham, S. 286–292.'
van: 'Hinrichsen S, Bornewasser M. How to Design Assembly Assistance Systems. In:
Karwowski W, Ahram T, editors. Advances in Intelligent Systems and Computing.
Cham: Springer International Publishing; 2019. p. 286–92.'
conference:
end_date: 2019-02-10
location: San Diego, USA
name: 2nd International Conference on Intelligent Human Systems
start_date: 2019-02-07
date_created: 2019-02-28T14:29:37Z
date_updated: 2023-03-15T13:50:03Z
department:
- _id: DEP7020
- _id: DEP1305
doi: 10.1007/978-3-030-11051-2_44
editor:
- first_name: 'Waldemar '
full_name: 'Karwowski, Waldemar '
last_name: Karwowski
- first_name: Tareq
full_name: Ahram, Tareq
last_name: Ahram
keyword:
- Assistance systems
- Manual assembly
- Cognitive ergonomics
language:
- iso: eng
main_file_link:
- url: https://link.springer.com/chapter/10.1007/978-3-030-11051-2_44
page: 286-292
place: Cham
publication: Advances in Intelligent Systems and Computing
publication_identifier:
eisbn:
- 978-3-030-11051-2
eissn:
- 2194-5365
isbn:
- 978-3-030-11050-5
issn:
- 2194-5357
publication_status: published
publisher: Springer International Publishing
quality_controlled: '1'
status: public
title: How to Design Assembly Assistance Systems
type: conference
user_id: '49010'
year: 2019
...
---
_id: '557'
abstract:
- lang: eng
text: Current processes for designing manual assembly workstations do not consider
the need for employee-appropriate, product-specific and operating resources-specific
factors. A systematic design tool would help to minimize cycle times, increase
productivity and improve ergonomic criteria. Therefore, a literature research
concerning workplace design for manual assembly was conducted. Additionally, a
guided Interview and a questionnaire were developed and approached on the trade
show “Motek” with 14 participants.The study shows evidence for the assumption
that there is no systematic approach todesigning manual assembly workstations.
author:
- first_name: Henning
full_name: Gote, Henning
id: '64558'
last_name: Gote
- first_name: Thomas
full_name: Glatzel, Thomas
id: '64888'
last_name: Glatzel
citation:
ama: 'Gote H, Glatzel T. Empirical Study of Workplace Design of Manual Assembly
Workstations in SME. In: Villmer F-J, Padoano E, Department of Production Engineering
and Management, eds. Production Engineering and Management. Lemgo; 2018:137-148.'
apa: Gote, H., & Glatzel, T. (2018). Empirical Study of Workplace Design of
Manual Assembly Workstations in SME. In F.-J. Villmer, E. Padoano, & Department
of Production Engineering and Management (Eds.), Production Engineering and
Management (pp. 137–148). Lemgo.
bjps: Gote H and Glatzel T (2018) Empirical Study of Workplace Design of
Manual Assembly Workstations in SME. In Villmer F-J, Padoano E and Department
of Production Engineering and Management (eds), Production Engineering and
Management. Lemgo, pp. 137–148.
chicago: Gote, Henning, and Thomas Glatzel. “Empirical Study of Workplace Design
of Manual Assembly Workstations in SME.” In Production Engineering and Management,
edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering
and Management, 137–48. Lemgo, 2018.
chicago-de: 'Gote, Henning und Thomas Glatzel. 2018. Empirical Study of Workplace
Design of Manual Assembly Workstations in SME. In: Production Engineering and
Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production
Engineering and Management, 137–148. Lemgo.'
din1505-2-1: 'Gote, Henning ; Glatzel, Thomas: Empirical Study of Workplace
Design of Manual Assembly Workstations in SME. In: Villmer,
F.-J. ; Padoano, E. ; Department of Production Engineering and Management
(Hrsg.): Production Engineering and Management. Lemgo, 2018, S. 137–148'
havard: 'H. Gote, T. Glatzel, Empirical Study of Workplace Design of Manual Assembly
Workstations in SME, in: F.-J. Villmer, E. Padoano, Department of Production Engineering
and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp.
137–148.'
ieee: H. Gote and T. Glatzel, “Empirical Study of Workplace Design of Manual Assembly
Workstations in SME,” in Production Engineering and Management, Lemgo,
2018, no. 1, pp. 137–148.
mla: Gote, Henning, and Thomas Glatzel. “Empirical Study of Workplace Design of
Manual Assembly Workstations in SME.” Production Engineering and Management,
edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 137–48.
short: 'H. Gote, T. Glatzel, in: F.-J. Villmer, E. Padoano, Department of Production
Engineering and Management (Eds.), Production Engineering and Management, Lemgo,
2018, pp. 137–148.'
ufg: 'Gote, Henning/Glatzel, Thomas (2018): Empirical Study of Workplace
Design of Manual Assembly Workstations in SME, in: Franz-Josef Villmer et. al.
(Hgg.): Production Engineering and Management, Lemgo, S. 137–148.'
van: 'Gote H, Glatzel T. Empirical Study of Workplace Design of Manual Assembly
Workstations in SME. In: Villmer F-J, Padoano E, Department of Production Engineering
and Management, editors. Production Engineering and Management. Lemgo; 2018. p.
137–48.'
conference:
end_date: 2018-10-05
location: Lemgo
name: Proceedings 8th International Conference
start_date: 2018-10-04
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-13T15:28:52Z
date_updated: 2023-03-15T13:50:00Z
department:
- _id: DEP7020
- _id: DEP1306
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
issue: '1'
keyword:
- Manual assembly
- Workplace design
- Ergonomic workstations
- SME
language:
- iso: eng
page: 137-148
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-946856-03-0
publication_status: published
status: public
title: Empirical Study of Workplace Design of Manual Assembly Workstations in SME
type: conference
user_id: '74004'
year: 2018
...
---
_id: '265'
abstract:
- lang: eng
text: The maintenance of a tool for injection molding or forming is usually accompanied
by its disassembly and assembly. The duration of the assembly activities is often
a large part of the total activity time for the maintenance of the tool. The degree
of performance of the employees in the execution of these disassembly and assembly
activities is often low. In addition, allowances occur (e.g. searching for work
equipment). At the Industrial Engineering Lab of the Ostwestfalen-Lippe University
of Applied Sciences, a prototype of an assistance system was developed to support
the assembly activities in toolmaking. With the help of this system, the operator
is guided step by step through the assembly process. The economic potential of
the system exists in the reduction of training times, the avoidance of assembly
errors and the increase of labor productivity.
author:
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Daniel
full_name: Riediger, Daniel
id: '52263'
last_name: Riediger
- first_name: Alexander
full_name: Unrau, Alexander
id: '64690'
last_name: Unrau
citation:
ama: 'Hinrichsen S, Riediger D, Unrau A. Development of a Projection-Based Assistance
System for Maintaining Injection Molding Tools. In: IEEE/ IEEM, ed. 2017 IEEE
International Conference on Industrial Engineering and Engineering Management
(IEEM). Danvers; 2017:1571-1575. doi:https://doi.org/10.1109/IEEM.2017.8290157'
apa: Hinrichsen, S., Riediger, D., & Unrau, A. (2017). Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools. In IEEE/ IEEM (Ed.),
2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM) (pp. 1571–1575). Danvers. https://doi.org/10.1109/IEEM.2017.8290157
bjps: Hinrichsen S, Riediger D and Unrau A (2017) Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools. In IEEE/ IEEM (ed.),
2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM). Danvers, pp. 1571–1575.
chicago: Hinrichsen, Sven, Daniel Riediger, and Alexander Unrau. “Development of
a Projection-Based Assistance System for Maintaining Injection Molding Tools.”
In 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM), edited by IEEE/ IEEM, 1571–75. Danvers, 2017. https://doi.org/10.1109/IEEM.2017.8290157.
chicago-de: 'Hinrichsen, Sven, Daniel Riediger und Alexander Unrau. 2017. Development
of a Projection-Based Assistance System for Maintaining Injection Molding Tools.
In: 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM), hg. von IEEE/ IEEM, 1571–1575. Danvers. doi:https://doi.org/10.1109/IEEM.2017.8290157,
.'
din1505-2-1: 'Hinrichsen, Sven ; Riediger, Daniel ; Unrau,
Alexander: Development of a Projection-Based Assistance System for Maintaining
Injection Molding Tools. In: IEEE/ IEEM
(Hrsg.): 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM). Danvers, 2017, S. 1571–1575'
havard: 'S. Hinrichsen, D. Riediger, A. Unrau, Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools, in: IEEE/ IEEM (Ed.),
2017 IEEE International Conference on Industrial Engineering and Engineering Management
(IEEM), Danvers, 2017: pp. 1571–1575.'
ieee: S. Hinrichsen, D. Riediger, and A. Unrau, “Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools,” in 2017 IEEE International
Conference on Industrial Engineering and Engineering Management (IEEM), Singapore,
2017, no. 1, pp. 1571–1575.
mla: Hinrichsen, Sven, et al. “Development of a Projection-Based Assistance System
for Maintaining Injection Molding Tools.” 2017 IEEE International Conference
on Industrial Engineering and Engineering Management (IEEM), edited by IEEE/
IEEM, no. 1, 2017, pp. 1571–75, doi:https://doi.org/10.1109/IEEM.2017.8290157.
short: 'S. Hinrichsen, D. Riediger, A. Unrau, in: IEEE/ IEEM (Ed.), 2017 IEEE International
Conference on Industrial Engineering and Engineering Management (IEEM), Danvers,
2017, pp. 1571–1575.'
ufg: 'Hinrichsen, Sven et. al. (2017): Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools, in: IEEE/ IEEM (Hg.):
2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM), Danvers, S. 1571–1575.'
van: 'Hinrichsen S, Riediger D, Unrau A. Development of a Projection-Based Assistance
System for Maintaining Injection Molding Tools. In: IEEE/ IEEM, editor. 2017 IEEE
International Conference on Industrial Engineering and Engineering Management
(IEEM). Danvers; 2017. p. 1571–5.'
conference:
end_date: 2017-12-13
location: Singapore
name: 'IEEE International Conference on Industrial Engineering and Engineering Management '
start_date: 2017-12-10
corporate_editor:
- IEEE/ IEEM
date_created: 2018-11-26T11:59:27Z
date_updated: 2023-03-15T13:49:41Z
ddc:
- '620'
department:
- _id: DEP7020
- _id: DEP1305
doi: https://doi.org/10.1109/IEEM.2017.8290157
issue: '1'
keyword:
- injection moulding
- machine tools
- maintenance engineering
- productivity
- projection-based assistance system
- injection molding tools
- assembly activities
- assembly process
- assembly errors
- tool maintenance
- disassembly activities
- economic potential
- Industrial Engineering Lab
- Ostwestfalen-Lippe University of Applied Sciences
- toolmaking
- Tools
- Injection molding
- Maintenance engineering
- Usability
- Task analysis
- Workstations
- Morphology
- assembly assistance systems
- assistance systems
- maintenance of injection molding tools
- manual assembly
language:
- iso: eng
page: 1571-1575
place: Danvers
publication: 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM)
publication_identifier:
isbn:
- '978-1-5386-0948-4 '
quality_controlled: '1'
status: public
title: Development of a Projection-Based Assistance System for Maintaining Injection
Molding Tools
type: conference
user_id: '74004'
year: 2017
...
---
_id: '4302'
abstract:
- lang: eng
text: In this paper we present smARt.assembly – a projection-based augmented reality
(AR) assembly assistance system for industrial applications. Our system projects
digital guidance information in terms of picking information and assembly data
into the physical workspace of a user. By using projections, we eliminate the
use of smart glasses that have drawbacks such as a limited field of view or low
wearing comfort. With smARt.assembly, users are able to assemble products without
previous knowledge and without any other assistance.
author:
- first_name: Oliver
full_name: Sand, Oliver
last_name: Sand
- first_name: Sebastian
full_name: Büttner, Sebastian
id: '61868'
last_name: Büttner
- first_name: Volker
full_name: Paelke, Volker
last_name: Paelke
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Sand O, Büttner S, Paelke V, Röcker C. smARt.Assembly: Projection-Based Augmented
Reality for Supporting Assembly Workers. In: Lackey S, Shumaker R, eds. 18th
International Conference on Human-Computer Interaction (HCII ’16). Vol 9740.
Lecture Notes in Computer Science / Information Systems and Applications, incl.
Internet/Web, and HCI. Springer; 2016:643-652. doi:10.1007/978-3-319-39907-2_61'
apa: 'Sand, O., Büttner, S., Paelke, V., & Röcker, C. (2016). smARt.Assembly:
Projection-Based Augmented Reality for Supporting Assembly Workers. In S. Lackey
& R. Shumaker (Eds.), 18th International Conference on Human-Computer Interaction
(HCII ’16) (Vol. 9740, pp. 643–652). Springer. https://doi.org/10.1007/978-3-319-39907-2_61'
bjps: 'Sand O et al. (2016) SmARt.Assembly: Projection-Based Augmented
Reality for Supporting Assembly Workers. In Lackey S and Shumaker R (eds), 18th
International Conference on Human-Computer Interaction (HCII ’16), vol. 9740.
Cham: Springer, pp. 643–652.'
chicago: 'Sand, Oliver, Sebastian Büttner, Volker Paelke, and Carsten Röcker. “SmARt.Assembly:
Projection-Based Augmented Reality for Supporting Assembly Workers.” In 18th
International Conference on Human-Computer Interaction (HCII ’16), edited
by Stefanie Lackey and Randall Shumaker, 9740:643–52. Lecture Notes in Computer
Science / Information Systems and Applications, Incl. Internet/Web, and HCI.
Cham: Springer, 2016. https://doi.org/10.1007/978-3-319-39907-2_61.'
chicago-de: 'Sand, Oliver, Sebastian Büttner, Volker Paelke und Carsten Röcker.
2016. smARt.Assembly: Projection-Based Augmented Reality for Supporting Assembly
Workers. In: 18th International Conference on Human-Computer Interaction (HCII
’16), hg. von Stefanie Lackey und Randall Shumaker, 9740:643–652. Lecture
Notes in Computer Science / Information Systems and Applications, incl. Internet/Web,
and HCI. Cham: Springer. doi:10.1007/978-3-319-39907-2_61,
.'
din1505-2-1: 'Sand, Oliver ; Büttner, Sebastian ; Paelke,
Volker ; Röcker, Carsten:
smARt.Assembly: Projection-Based Augmented Reality for Supporting Assembly Workers.
In: Lackey, S. ; Shumaker,
R. (Hrsg.): 18th International Conference on Human-Computer Interaction
(HCII ’16), Lecture Notes in Computer Science / Information Systems and
Applications, incl. Internet/Web, and HCI. Bd. 9740. Cham : Springer, 2016,
S. 643–652'
havard: 'O. Sand, S. Büttner, V. Paelke, C. Röcker, smARt.Assembly: Projection-Based
Augmented Reality for Supporting Assembly Workers, in: S. Lackey, R. Shumaker
(Eds.), 18th International Conference on Human-Computer Interaction (HCII ’16),
Springer, Cham, 2016: pp. 643–652.'
ieee: 'O. Sand, S. Büttner, V. Paelke, and C. Röcker, “smARt.Assembly: Projection-Based
Augmented Reality for Supporting Assembly Workers,” in 18th International Conference
on Human-Computer Interaction (HCII ’16), vol. 9740, S. Lackey and R. Shumaker,
Eds. Cham: Springer, 2016, pp. 643–652. doi: 10.1007/978-3-319-39907-2_61.'
mla: 'Sand, Oliver, et al. “SmARt.Assembly: Projection-Based Augmented Reality for
Supporting Assembly Workers.” 18th International Conference on Human-Computer
Interaction (HCII ’16), edited by Stefanie Lackey and Randall Shumaker, vol.
9740, Springer, 2016, pp. 643–52, https://doi.org/10.1007/978-3-319-39907-2_61.'
short: 'O. Sand, S. Büttner, V. Paelke, C. Röcker, in: S. Lackey, R. Shumaker (Eds.),
18th International Conference on Human-Computer Interaction (HCII ’16), Springer,
Cham, 2016, pp. 643–652.'
ufg: 'Sand, Oliver u. a.: smARt.Assembly: Projection-Based Augmented Reality
for Supporting Assembly Workers, in: Lackey, Stefanie/Shumaker, Randall (Hgg.):
18th International Conference on Human-Computer Interaction (HCII ’16), Bd. 9740,
Cham 2016 (Lecture Notes in Computer Science / Information Systems and Applications,
incl. Internet/Web, and HCI), S. 643–652.'
van: 'Sand O, Büttner S, Paelke V, Röcker C. smARt.Assembly: Projection-Based Augmented
Reality for Supporting Assembly Workers. In: Lackey S, Shumaker R, editors. 18th
International Conference on Human-Computer Interaction (HCII ’16). Cham: Springer;
2016. p. 643–52. (Lecture Notes in Computer Science / Information Systems and
Applications, incl. Internet/Web, and HCI; vol. 9740).'
conference:
end_date: 2016-07-22
location: Toronto, Canada
name: '8th International Conference, VAMR 2016, Held as Part of HCI International
2016, '
start_date: 2016-07-17
date_created: 2020-12-22T14:11:06Z
date_updated: 2025-04-11T09:06:01Z
department:
- _id: DEP5023
doi: 10.1007/978-3-319-39907-2_61
editor:
- first_name: Stefanie
full_name: Lackey, Stefanie
last_name: Lackey
- first_name: Randall
full_name: Shumaker, Randall
last_name: Shumaker
intvolume: ' 9740'
keyword:
- Augmented reality
- Projection
- Assembly work
- Manual assembly
language:
- iso: eng
page: 643-652
place: Cham
publication: 18th International Conference on Human-Computer Interaction (HCII '16)
publication_identifier:
isbn:
- 978-3-319-39906-5
unknown:
- 978-3-319-39907-2
publication_status: published
publisher: Springer
series_title: Lecture Notes in Computer Science / Information Systems and Applications,
incl. Internet/Web, and HCI
status: public
title: 'smARt.Assembly: Projection-Based Augmented Reality for Supporting Assembly
Workers'
type: book_chapter
user_id: '83781'
volume: 9740
year: '2016'
...
---
_id: '584'
abstract:
- lang: eng
text: Due to the continuing trend towards more complexity of products with an increasing
number of variants and smaller lot sizes, the assembly often takes place -despite
relatively high labor costs in Western industrialized nations -manually or partially
automated. An outsourcing or relocation of assembly function abroad is not suitable
in most cases.Therefore, it is increasingly important to reduce process variations
and waste in manual assembly processes. Assistance systems have the potential,
depending on the situation, to assist the worker in his work, to reduce error
rate and to increase productivity. In a first part of the paper an overview will
be given to different types of assembly assistance systems. Then a morphological
chart is developed, which can provide assistance in selecting or comparing assembly
assistance systems. With the help of this chart an assembly assistant system is
presented. Finally a quick look is taken at further research being done in this
area.
author:
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Daniel
full_name: Riediger, Daniel
id: '52263'
last_name: Riediger
- first_name: Alexander
full_name: Unrau, Alexander
id: '64690'
last_name: Unrau
citation:
ama: 'Hinrichsen S, Riediger D, Unrau A. Assistance Systems in Manual Assembly.
In: Villmer FJ, Padoano E, Department of Production Engineering and Management,
Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management.
; 2016:3-14.'
apa: Hinrichsen, S., Riediger, D., & Unrau, A. (2016). Assistance Systems in
Manual Assembly. In F.-J. Villmer, E. Padoano, Department of Production Engineering
and Management, & Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering
and Management (Issue 01, pp. 3–14).
bjps: Hinrichsen S, Riediger D and Unrau A (2016) Assistance Systems in Manual
Assembly. In Villmer F-J et al. (eds), Production Engineering and Management.
Lemgo, pp. 3–14.
chicago: Hinrichsen, Sven, Daniel Riediger, and Alexander Unrau. “Assistance Systems
in Manual Assembly.” In Production Engineering and Management, edited by
Franz-Josef Villmer, Elio Padoano, Department of Production Engineering and Management,
and Hochschule Ostwestfalen-Lippe, 3–14. Lemgo, 2016.
chicago-de: 'Hinrichsen, Sven, Daniel Riediger und Alexander Unrau. 2016. Assistance
Systems in Manual Assembly. In: Production Engineering and Management,
hg. von Franz-Josef Villmer, Elio Padoano, Department of Production Engineering
and Management, und Hochschule Ostwestfalen-Lippe, 3–14. Lemgo.'
din1505-2-1: 'Hinrichsen, Sven ; Riediger, Daniel ; Unrau,
Alexander: Assistance Systems in Manual Assembly. In: Villmer,
F.-J. ; Padoano, E. ; Department of Production Engineering and Management
; Hochschule Ostwestfalen-Lippe
(Hrsg.): Production Engineering and Management. Lemgo, 2016, S. 3–14'
havard: 'S. Hinrichsen, D. Riediger, A. Unrau, Assistance Systems in Manual Assembly,
in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management,
Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management, Lemgo,
2016: pp. 3–14.'
ieee: S. Hinrichsen, D. Riediger, and A. Unrau, “Assistance Systems in Manual Assembly,”
in Production Engineering and Management, Lemgo, 2016, no. 01, pp. 3–14.
mla: Hinrichsen, Sven, et al. “Assistance Systems in Manual Assembly.” Production
Engineering and Management, edited by Franz-Josef Villmer et al., no. 01,
2016, pp. 3–14.
short: 'S. Hinrichsen, D. Riediger, A. Unrau, in: F.-J. Villmer, E. Padoano, Department
of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.),
Production Engineering and Management, Lemgo, 2016, pp. 3–14.'
ufg: 'Hinrichsen, Sven/Riediger, Daniel/Unrau, Alexander: Assistance Systems
in Manual Assembly, in: Villmer, Franz-Josef u. a. (Hgg.): Production Engineering
and Management, Lemgo 2016, S. 3–14.'
van: 'Hinrichsen S, Riediger D, Unrau A. Assistance Systems in Manual Assembly.
In: Villmer FJ, Padoano E, Department of Production Engineering and Management,
Hochschule Ostwestfalen-Lippe, editors. Production Engineering and Management.
Lemgo; 2016. p. 3–14.'
conference:
end_date: 2016-09-30
location: Lemgo
name: Proceedings 6th International Conference
start_date: 2016-09-29
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-18T14:30:50Z
date_updated: 2023-04-14T11:27:48Z
ddc:
- '620'
department:
- _id: DEP7020
- _id: DEP1306
- _id: DEP1305
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
file:
- access_level: open_access
content_type: application/pdf
creator: mqc-p4h
date_created: 2023-04-14T11:26:54Z
date_updated: 2023-04-14T11:26:54Z
file_id: '9700'
file_name: PEM_2016_Hinrichsen Riediger Unrau.pdf
file_size: 462853
relation: main_file
success: 1
file_date_updated: 2023-04-14T11:26:54Z
has_accepted_license: '1'
issue: '01'
keyword:
- Assistance systems
- Manual assembly
- Morphology
language:
- iso: eng
oa: '1'
page: 3-14
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-946856-00-9
publication_status: published
quality_controlled: '1'
status: public
title: Assistance Systems in Manual Assembly
type: conference
user_id: '49010'
year: '2016'
...