---
_id: '13327'
abstract:
- lang: eng
text: 'The aim of this study was to investigate if vibroacoustic methods may be
used for the non-destructive determination of beef during its aging process. The
vibroacoustic method was based on the observation of mechanical changes in the
meat during the aging process and was compared with reference data obtained by
Warner-Bratzler shear force measurement as well as sensory testing of the tenderness
using a ten-part scale. To evaluate the mechanical properties, transfer functions
were used representing the time dependency of the signal and thus the viscoelastic
behaviour. In this study, a total of 31 roastbeef samples from 16 different young
bulls and two older cows were examined from day of slaughter to day 21 of cold
storage with regard to their tenderness. For this purpose, vibroacoustic measurements
were carried out on the unprocessed/raw meat at intervals of 1–3 days. The reference
measurements using sensor technology and Warner-Bratzler shear force measurement
were carried out on the first (day of slaughter) and last (21st day) day on slices
of roast beef cooked with saturated steam. In the results of all three methods,
the shear force measurement, the sensory test and the vibroacoustic method, showed
that roastbeef from the same animal but different halves produced different results.
Basically, it is possible to predict the tenderness of roastbeef by taking measurements
at the beginning of the maturing process for the end of the maturing period using
vibroacoustic methods: Data analysis led to a trend function that roughly reflects
the actual tenderness, which is generally higher than the real tenderness represented
by the shear-force measurement. In order to obtain a better resolution for recording
the mechanical changes during the aging process, the measurements should be carried
out at shorter intervals.'
article_number: '100017'
author:
- first_name: Janna
full_name: Tholen, Janna
id: '80924'
last_name: Tholen
- first_name: Jan
full_name: Gohe, Jan
id: '81432'
last_name: Gohe
- first_name: Helene
full_name: Dörksen, Helene
id: '46416'
last_name: Dörksen
- first_name: Theo
full_name: Kiesel, Theo
id: '71758'
last_name: Kiesel
- first_name: Matthias
full_name: Upmann, Matthias
id: '12666'
last_name: Upmann
citation:
ama: Tholen J, Gohe J, Dörksen H, Kiesel T, Upmann M. Tenderness prediction for
beef using novel data analysis methods based on system dynamic and acoustic signals.
Food Physics. 2024;1(9). doi:10.1016/j.foodp.2024.100017
apa: Tholen, J., Gohe, J., Dörksen, H., Kiesel, T., & Upmann, M. (2024). Tenderness
prediction for beef using novel data analysis methods based on system dynamic
and acoustic signals. Food Physics, 1(9), Article 100017. https://doi.org/10.1016/j.foodp.2024.100017
bjps: Tholen J et al. (2024) Tenderness Prediction for Beef Using
Novel Data Analysis Methods Based on System Dynamic and Acoustic Signals. Food
Physics 1.
chicago: Tholen, Janna, Jan Gohe, Helene Dörksen, Theo Kiesel, and Matthias Upmann.
“Tenderness Prediction for Beef Using Novel Data Analysis Methods Based on System
Dynamic and Acoustic Signals.” Food Physics 1, no. 9 (2024). https://doi.org/10.1016/j.foodp.2024.100017.
chicago-de: Tholen, Janna, Jan Gohe, Helene Dörksen, Theo Kiesel und Matthias Upmann.
2024. Tenderness prediction for beef using novel data analysis methods based on
system dynamic and acoustic signals. Food Physics 1, Nr. 9. doi:10.1016/j.foodp.2024.100017,
.
din1505-2-1: 'Tholen, Janna ; Gohe, Jan ; Dörksen,
Helene ; Kiesel, Theo ; Upmann, Matthias: Tenderness prediction
for beef using novel data analysis methods based on system dynamic and acoustic
signals. In: Food Physics Bd. 1. Amsterdam, Elsevier BV (2024), Nr. 9'
havard: J. Tholen, J. Gohe, H. Dörksen, T. Kiesel, M. Upmann, Tenderness prediction
for beef using novel data analysis methods based on system dynamic and acoustic
signals, Food Physics. 1 (2024).
ieee: 'J. Tholen, J. Gohe, H. Dörksen, T. Kiesel, and M. Upmann, “Tenderness prediction
for beef using novel data analysis methods based on system dynamic and acoustic
signals,” Food Physics, vol. 1, no. 9, Art. no. 100017, 2024, doi: 10.1016/j.foodp.2024.100017.'
mla: Tholen, Janna, et al. “Tenderness Prediction for Beef Using Novel Data Analysis
Methods Based on System Dynamic and Acoustic Signals.” Food Physics, vol.
1, no. 9, 100017, 2024, https://doi.org/10.1016/j.foodp.2024.100017.
short: J. Tholen, J. Gohe, H. Dörksen, T. Kiesel, M. Upmann, Food Physics 1 (2024).
ufg: 'Tholen, Janna u. a.: Tenderness prediction for beef using novel data
analysis methods based on system dynamic and acoustic signals, in: Food Physics
1 (2024), H. 9.'
van: Tholen J, Gohe J, Dörksen H, Kiesel T, Upmann M. Tenderness prediction for
beef using novel data analysis methods based on system dynamic and acoustic signals.
Food Physics. 2024;1(9).
date_created: 2025-12-12T15:03:34Z
date_updated: 2025-12-15T13:08:47Z
department:
- _id: DEP4028
doi: 10.1016/j.foodp.2024.100017
intvolume: ' 1'
issue: '9'
keyword:
- Warner-Bratzler shear force
- Vibroacoustic methods
- Non-destructively measurement
- Viscoelastic meat
language:
- iso: eng
place: Amsterdam
publication: Food Physics
publication_identifier:
eissn:
- 2950-0699
publication_status: published
publisher: Elsevier BV
status: public
title: Tenderness prediction for beef using novel data analysis methods based on system
dynamic and acoustic signals
type: scientific_journal_article
user_id: '83781'
volume: 1
year: '2024'
...
---
_id: '12028'
abstract:
- lang: eng
text: 'Since the early 2000s, forest owners in Central Europe have increasingly
planted Nordmann fir (Abies nordmanniana (STEV.) SPACH) and Noble fir (Abies procera
REHD.) for Christmas trees, intending to convert them into high forests. Climate-related
damage, especially since 2018, has significantly reduced spruce populations, requirering
a shift towards climate-adaptable tree species in future forests. Additionally,
to reduce CO2 emissions from construction, there''s a push for expanding timber
construction, requiring non-spruce species for load-bearing products and applications.
Although Nordmann and Noble fir are potential alternatives to spruce, they are
not yet integrated into European standardization for load-bearing construction.
Therefore, an assessment of German-origin Nordmann and Noble fir for use in glued
laminated building products (GLT and CLT) is underway. Kiln-dried lamellas are
graded visually and by machine using longitudinal vibration, with selected lamellas
tested for tensile strength. Various mechanical properties are determined using
non-destructive and destructive methods to establish input parameters for Finite
Element Analysis (FEA). '
author:
- first_name: Katja
full_name: Frühwald-König, Katja
id: '26232'
last_name: Frühwald-König
- first_name: Martin
full_name: Hackel, Martin
id: '79798'
last_name: Hackel
- first_name: Dennis
full_name: Kipp, Dennis
id: '69573'
last_name: Kipp
- first_name: Karin
full_name: Lüke, Karin
id: '74640'
last_name: Lüke
- first_name: Felix Leonard
full_name: Stracke, Felix Leonard
id: '77282'
last_name: Stracke
- first_name: Noah
full_name: Burghaus, Noah
id: '77259'
last_name: Burghaus
- first_name: Stefanie
full_name: Wieland, Stefanie
last_name: Wieland
citation:
ama: Frühwald-König K, Hackel M, Kipp D, et al. Nordmann and Noble Fir Lamellas
for Structural Purposes – Grading and Determination of Elastomechanical Properties
by Non-Destructive and Destructive Testing. United States Department of Agriculture
(USDA); 2024:192-204.
apa: Frühwald-König, K., Hackel, M., Kipp, D., Lüke, K., Stracke, F. L., Burghaus,
N., & Wieland, S. (2024). Nordmann and Noble fir Lamellas for Structural Purposes
– Grading and Determination of Elastomechanical Properties by Non-Destructive
and Destructive Testing. In Proceedings of the 23rd International Nondestructive
Testing and Evaluation of Wood Symposium (pp. 192–204). United States Department
of Agriculture (USDA).
bjps: Frühwald-König K et al. (2024) Nordmann and Noble Fir Lamellas
for Structural Purposes – Grading and Determination of Elastomechanical Properties
by Non-Destructive and Destructive Testing. United States Department of Agriculture
(USDA).
chicago: Frühwald-König, Katja, Martin Hackel, Dennis Kipp, Karin Lüke, Felix Leonard
Stracke, Noah Burghaus, and Stefanie Wieland. Nordmann and Noble Fir Lamellas
for Structural Purposes – Grading and Determination of Elastomechanical Properties
by Non-Destructive and Destructive Testing. Proceedings of the 23rd International
Nondestructive Testing and Evaluation of Wood Symposium. United States Department
of Agriculture (USDA), 2024.
chicago-de: Frühwald-König, Katja, Martin Hackel, Dennis Kipp, Karin Lüke, Felix
Leonard Stracke, Noah Burghaus und Stefanie Wieland. 2024. Nordmann and Noble
fir Lamellas for Structural Purposes – Grading and Determination of Elastomechanical
Properties by Non-Destructive and Destructive Testing. Proceedings of the
23rd International Nondestructive Testing and Evaluation of Wood Symposium.
United States Department of Agriculture (USDA).
din1505-2-1: 'Frühwald-König, Katja
; Hackel, Martin ; Kipp,
Dennis ; Lüke, Karin ; Stracke, Felix Leonard ; Burghaus,
Noah ; Wieland, Stefanie:
Nordmann and Noble fir Lamellas for Structural Purposes – Grading and Determination
of Elastomechanical Properties by Non-Destructive and Destructive Testing :
United States Department of Agriculture (USDA), 2024'
havard: K. Frühwald-König, M. Hackel, D. Kipp, K. Lüke, F.L. Stracke, N. Burghaus,
S. Wieland, Nordmann and Noble fir Lamellas for Structural Purposes – Grading
and Determination of Elastomechanical Properties by Non-Destructive and Destructive
Testing, United States Department of Agriculture (USDA), 2024.
ieee: K. Frühwald-König et al., Nordmann and Noble fir Lamellas for Structural
Purposes – Grading and Determination of Elastomechanical Properties by Non-Destructive
and Destructive Testing. United States Department of Agriculture (USDA), 2024,
pp. 192–204.
mla: Frühwald-König, Katja, et al. “Nordmann and Noble Fir Lamellas for Structural
Purposes – Grading and Determination of Elastomechanical Properties by Non-Destructive
and Destructive Testing.” Proceedings of the 23rd International Nondestructive
Testing and Evaluation of Wood Symposium, United States Department of Agriculture
(USDA), 2024, pp. 192–204.
short: K. Frühwald-König, M. Hackel, D. Kipp, K. Lüke, F.L. Stracke, N. Burghaus,
S. Wieland, Nordmann and Noble Fir Lamellas for Structural Purposes – Grading
and Determination of Elastomechanical Properties by Non-Destructive and Destructive
Testing, United States Department of Agriculture (USDA), 2024.
ufg: 'Frühwald-König, Katja u. a.: Nordmann and Noble fir Lamellas for Structural
Purposes – Grading and Determination of Elastomechanical Properties by Non-Destructive
and Destructive Testing, o. O. 2024.'
van: Frühwald-König K, Hackel M, Kipp D, Lüke K, Stracke FL, Burghaus N, et al.
Nordmann and Noble fir Lamellas for Structural Purposes – Grading and Determination
of Elastomechanical Properties by Non-Destructive and Destructive Testing. Proceedings
of the 23rd International Nondestructive Testing and Evaluation of Wood Symposium.
United States Department of Agriculture (USDA); 2024.
conference:
end_date: 2024-09-21
location: Campinas, Sao Paulo, Brasil
name: 23rd International Nondestructive Testing and Evaluation of Wood Symposium
start_date: 2024-09-17
date_created: 2024-11-08T09:33:17Z
date_updated: 2024-11-08T14:35:51Z
department:
- _id: DEP7018
- _id: DEP1309
keyword:
- Nordmann fir
- Noble fir
- grading
- elastomechanical properties
- ultrasonic testing
- vibration measurement
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://0cdb47ff-77aa-47e5-934f-02cbc1522dca.usrfiles.com/ugd/0cdb47_0e99942089924b718bd01f1cb897f338.pdf
oa: '1'
page: 192-204
publication: Proceedings of the 23rd International Nondestructive Testing and Evaluation
of Wood Symposium
publication_status: published
publisher: United States Department of Agriculture (USDA)
status: public
title: Nordmann and Noble fir Lamellas for Structural Purposes – Grading and Determination
of Elastomechanical Properties by Non-Destructive and Destructive Testing
type: conference_editor_article
user_id: '83781'
year: '2024'
...
---
_id: '10788'
abstract:
- lang: eng
text: For process monitoring, an adequate data preprocessing is crucial to link
accessible inline process data with offline measured target variables. Literature,
however, does not provide systematic preprocessing strategies. The effects of
five different preprocessing strategies on data from a Dielectric Spectroscopy
system applied to the Viable Cell Density (VCD) of a mammalian cell cultivation
were thus evaluated. Single-frequency measurements are typically used to model
the VCD over the growth phase using linear regression or the Cole-Cole model and
served as a reference. As multi-frequency measurement is promising to model the
VCD beyond the growth phase using Partial Least Squares Regression (PLSR), we
further aimed to determine, whether replacing linear regression by PLSR shows
comparable modeling performance. All five preprocessing strategies led to comparable
results. Exemplary, when using capacitance values at a frequency of 3347 kHz,
linear regression resulted in a R2 of 0.90 and a standard deviation of 0.4 % on
average. Both normalization techniques had the same positive effect on the results
of PLSR. The order of smoothing and normalization was irrelevant for both regression
methods. Comparing the results of linear regression and PLSR, the latter obtained
on average 9 % better results. Therefore, we concluded that PLSR is preferable
over linear regression and is potentially suitable to model the VCD beyond the
growth phase, which is suggested to be investigated based on more data sets.
author:
- first_name: Selina
full_name: Ramm, Selina
id: '68713'
last_name: Ramm
orcid: https://orcid.org/0000-0002-0502-8032
- first_name: Tanja
full_name: Hernández Rodriguez, Tanja
id: '52466'
last_name: Hernández Rodriguez
- first_name: Björn
full_name: Frahm, Björn
id: '45666'
last_name: Frahm
- first_name: Miriam
full_name: Pein-Hackelbusch, Miriam
id: '64952'
last_name: Pein-Hackelbusch
orcid: 0000-0002-7920-0595
citation:
ama: Ramm S, Hernández Rodriguez T, Frahm B, Pein-Hackelbusch M. Systematic Preprocessing
of Dielectric Spectroscopy Data and Estimating Viable Cell Densities. (Jasperneite
J, Wisniewski L, Fung Man K, Institute of Electrical and Electronics Engineers
, eds.). IEEE; 2023:1-6. doi:10.1109/INDIN51400.2023.10218012
apa: Ramm, S., Hernández Rodriguez, T., Frahm, B., & Pein-Hackelbusch, M. (2023).
Systematic Preprocessing of Dielectric Spectroscopy Data and Estimating Viable
Cell Densities. In J. Jasperneite, L. Wisniewski, K. Fung Man, & Institute
of Electrical and Electronics Engineers (Eds.), 2023 IEEE 21st International
Conference on Industrial Informatics (INDIN) (pp. 1–6). IEEE. https://doi.org/10.1109/INDIN51400.2023.10218012
bjps: 'Ramm S et al. (2023) Systematic Preprocessing of Dielectric
Spectroscopy Data and Estimating Viable Cell Densities, Jasperneite J et al.
(eds). [Piscataway, NJ]: IEEE.'
chicago: 'Ramm, Selina, Tanja Hernández Rodriguez, Björn Frahm, and Miriam Pein-Hackelbusch.
Systematic Preprocessing of Dielectric Spectroscopy Data and Estimating Viable
Cell Densities. Edited by Jürgen Jasperneite, Lukasz Wisniewski, Kim Fung
Man, and Institute of Electrical and Electronics Engineers . 2023 IEEE 21st
International Conference on Industrial Informatics (INDIN). [Piscataway, NJ]:
IEEE, 2023. https://doi.org/10.1109/INDIN51400.2023.10218012.'
chicago-de: 'Ramm, Selina, Tanja Hernández Rodriguez, Björn Frahm und Miriam Pein-Hackelbusch.
2023. Systematic Preprocessing of Dielectric Spectroscopy Data and Estimating
Viable Cell Densities. Hg. von Jürgen Jasperneite, Lukasz Wisniewski, Kim
Fung Man, und Institute of Electrical and Electronics Engineers . 2023 IEEE
21st International Conference on Industrial Informatics (INDIN). [Piscataway,
NJ]: IEEE. doi:10.1109/INDIN51400.2023.10218012,
.'
din1505-2-1: 'Ramm, Selina ; Hernández Rodriguez, Tanja ; Frahm,
Björn ; Pein-Hackelbusch, Miriam
; Jasperneite, J. ; Wisniewski,
L. ; Fung Man, K. ; Institute of Electrical and Electronics Engineers
(Hrsg.): Systematic Preprocessing of Dielectric Spectroscopy Data and
Estimating Viable Cell Densities. [Piscataway, NJ] : IEEE, 2023'
havard: S. Ramm, T. Hernández Rodriguez, B. Frahm, M. Pein-Hackelbusch, Systematic
Preprocessing of Dielectric Spectroscopy Data and Estimating Viable Cell Densities,
IEEE, [Piscataway, NJ], 2023.
ieee: 'S. Ramm, T. Hernández Rodriguez, B. Frahm, and M. Pein-Hackelbusch, Systematic
Preprocessing of Dielectric Spectroscopy Data and Estimating Viable Cell Densities.
[Piscataway, NJ]: IEEE, 2023, pp. 1–6. doi: 10.1109/INDIN51400.2023.10218012.'
mla: Ramm, Selina, et al. “Systematic Preprocessing of Dielectric Spectroscopy Data
and Estimating Viable Cell Densities.” 2023 IEEE 21st International Conference
on Industrial Informatics (INDIN), edited by Jürgen Jasperneite et al., IEEE,
2023, pp. 1–6, https://doi.org/10.1109/INDIN51400.2023.10218012.
short: S. Ramm, T. Hernández Rodriguez, B. Frahm, M. Pein-Hackelbusch, Systematic
Preprocessing of Dielectric Spectroscopy Data and Estimating Viable Cell Densities,
IEEE, [Piscataway, NJ], 2023.
ufg: 'Ramm, Selina u. a.: Systematic Preprocessing of Dielectric Spectroscopy
Data and Estimating Viable Cell Densities, hg. von Jasperneite, Jürgen u. a.,
[Piscataway, NJ] 2023.'
van: 'Ramm S, Hernández Rodriguez T, Frahm B, Pein-Hackelbusch M. Systematic Preprocessing
of Dielectric Spectroscopy Data and Estimating Viable Cell Densities. Jasperneite
J, Wisniewski L, Fung Man K, Institute of Electrical and Electronics Engineers
, editors. 2023 IEEE 21st International Conference on Industrial Informatics (INDIN).
[Piscataway, NJ]: IEEE; 2023.'
conference:
end_date: 2023-07-20
location: Lemgo
name: 21st International Conference on Industrial Informatics (INDIN)
start_date: 2023-07-18
corporate_editor:
- 'Institute of Electrical and Electronics Engineers '
date_created: 2023-11-21T08:17:12Z
date_updated: 2025-04-29T07:38:03Z
department:
- _id: DEP4022
- _id: DEP4028
doi: 10.1109/INDIN51400.2023.10218012
editor:
- first_name: Jürgen
full_name: Jasperneite, Jürgen
id: '1899'
last_name: Jasperneite
- first_name: Lukasz
full_name: Wisniewski, Lukasz
id: '1710'
last_name: Wisniewski
- first_name: Kim
full_name: Fung Man, Kim
last_name: Fung Man
keyword:
- Spectroscopy
- Smoothing methods
- Systematics
- Phase measurement
- Linear regression
- Data models
- Dielectric measurement
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://ieeexplore.ieee.org/document/10218012
oa: '1'
page: 1-6
place: '[Piscataway, NJ]'
publication: 2023 IEEE 21st International Conference on Industrial Informatics (INDIN)
publication_identifier:
eisbn:
- 978-1-6654-9313-0
isbn:
- 978-1-6654-9314-7
issn:
- 1935-4576
publication_status: published
publisher: IEEE
status: public
title: Systematic Preprocessing of Dielectric Spectroscopy Data and Estimating Viable
Cell Densities
type: conference_editor_article
user_id: '83781'
year: '2023'
...
---
_id: '12706'
abstract:
- lang: eng
text: Vaseline, also referred to as petrolatum, is a colloidal dispersion of liquid-crystalline
structures of hydrocarbons derived from petroleum. It has long been recognized
for its versatile applications in the pharmaceutical industry, with its use in
the formulation of various topical medications, wound care products, and drug
delivery systems. For pharmaceutical use, petrolatum has to meet the quality standards
described in its Pharmacopoeia monograph. The comprised test ranges allow for
a broad range of Vaseline qualities on the market, while the tests themselves
only poorly discriminate between grades. The only differentiating properties are
related to the melting behavior, which is tested via drop point analysis, and
the consistency, addressed in the functionality-related characteristics section.
In this study, we propose the hypothesis that Near-infrared spectroscopy (NIRS)
could be a comparably simple method to evaluate the crystalline behavior of Vaseline
qualities. We expect such information to provide additional details for Vaseline
quality discrimination. This discrimination would allow the most suitable petroleum
jelly to be selected for an existing formulation when the previous one needs to
be replaced; for example, due to a manufacturer change. We demonstrate that NIRS
in transmission and reflectance mode obtained by traditional continuous spectra
acquisition and fragmented NIR spectra acquisition through multi-optical, multi-modal
excitation, respectively, can both serve as a basis for detecting Vaseline quality
differences, which we have further proven by thermal analysis and tests with semisolid
formulations. Additionally, we demonstrate that a lower-cost multi-optical spectrometer
in reflectance mode can detect Vaseline quality differences in rotated samples.
author:
- first_name: Niels Hendrik
full_name: Fliedner, Niels Hendrik
last_name: Fliedner
- first_name: Volker
full_name: Lohweg, Volker
last_name: Lohweg
- first_name: Claudia
full_name: Al-Karawi, Claudia
last_name: Al-Karawi
- first_name: Miriam
full_name: Pein-Hackelbusch, Miriam
last_name: Pein-Hackelbusch
citation:
ama: Fliedner NH, Lohweg V, Al-Karawi C, Pein-Hackelbusch M. A Novel Spectroscopic
Approach for Vaseline Quality Discrimination. (Dörksen H, Scanzio S, Jasperneite
J, et al., eds.). IEEE; 2023. doi:10.1109/indin51400.2023.10218318
apa: Fliedner, N. H., Lohweg, V., Al-Karawi, C., & Pein-Hackelbusch, M. (2023).
A Novel Spectroscopic Approach for Vaseline Quality Discrimination. In H. Dörksen,
S. Scanzio, J. Jasperneite, L. Wisniewski, K. F. Man, T. Sauter, L. Seno, H. Trsek,
V. Vyatkin, & Institute of Electrical and Electronics Engineers (Eds.), 2023
IEEE 21st International Conference on Industrial Informatics (INDIN). IEEE.
https://doi.org/10.1109/indin51400.2023.10218318
bjps: 'Fliedner NH et al. (2023) A Novel Spectroscopic Approach
for Vaseline Quality Discrimination, Dörksen H et al. (eds). [Piscataway,
NJ] : IEEE.'
chicago: 'Fliedner, Niels Hendrik, Volker Lohweg, Claudia Al-Karawi, and Miriam
Pein-Hackelbusch. A Novel Spectroscopic Approach for Vaseline Quality Discrimination.
Edited by Helene Dörksen, Stefano Scanzio, Jürgen Jasperneite, Lukasz Wisniewski,
Kim Fung Man, Thilo Sauter, Lucia Seno, Henning Trsek, Valeriy Vyatkin, and
Institute of Electrical and Electronics Engineers . 2023 IEEE 21st International
Conference on Industrial Informatics (INDIN). [Piscataway, NJ] : IEEE, 2023.
https://doi.org/10.1109/indin51400.2023.10218318.'
chicago-de: 'Fliedner, Niels Hendrik, Volker Lohweg, Claudia Al-Karawi und Miriam
Pein-Hackelbusch. 2023. A Novel Spectroscopic Approach for Vaseline Quality
Discrimination. Hg. von Helene Dörksen, Stefano Scanzio, Jürgen Jasperneite,
Lukasz Wisniewski, Kim Fung Man, Thilo Sauter, Lucia Seno, Henning Trsek, Valeriy Vyatkin,
und Institute of Electrical and Electronics Engineers . 2023 IEEE 21st International
Conference on Industrial Informatics (INDIN). [Piscataway, NJ] : IEEE. doi:10.1109/indin51400.2023.10218318,
.'
din1505-2-1: 'Fliedner, Niels Hendrik
; Lohweg, Volker ; Al-Karawi,
Claudia ; Pein-Hackelbusch, Miriam
; Dörksen,
H. ; Scanzio, S. ; Jasperneite, J. ; Wisniewski,
L. ; Man, K. F. ; Sauter,
T. ; Seno, L. ; Trsek,
H. ; u. a. (Hrsg.): A Novel Spectroscopic Approach for Vaseline
Quality Discrimination. [Piscataway, NJ] : IEEE, 2023'
havard: N.H. Fliedner, V. Lohweg, C. Al-Karawi, M. Pein-Hackelbusch, A Novel Spectroscopic
Approach for Vaseline Quality Discrimination, IEEE, [Piscataway, NJ] , 2023.
ieee: 'N. H. Fliedner, V. Lohweg, C. Al-Karawi, and M. Pein-Hackelbusch, A Novel
Spectroscopic Approach for Vaseline Quality Discrimination. [Piscataway, NJ]
: IEEE, 2023. doi: 10.1109/indin51400.2023.10218318.'
mla: Fliedner, Niels Hendrik, et al. “A Novel Spectroscopic Approach for Vaseline
Quality Discrimination.” 2023 IEEE 21st International Conference on Industrial
Informatics (INDIN), edited by Helene Dörksen et al., IEEE, 2023, https://doi.org/10.1109/indin51400.2023.10218318.
short: N.H. Fliedner, V. Lohweg, C. Al-Karawi, M. Pein-Hackelbusch, A Novel Spectroscopic
Approach for Vaseline Quality Discrimination, IEEE, [Piscataway, NJ] , 2023.
ufg: 'Fliedner, Niels Hendrik u. a.: A Novel Spectroscopic Approach for Vaseline
Quality Discrimination, hg. von Dörksen, Helene u. a., [Piscataway, NJ] 2023.'
van: 'Fliedner NH, Lohweg V, Al-Karawi C, Pein-Hackelbusch M. A Novel Spectroscopic
Approach for Vaseline Quality Discrimination. Dörksen H, Scanzio S, Jasperneite
J, Wisniewski L, Man KF, Sauter T, et al., editors. 2023 IEEE 21st International
Conference on Industrial Informatics (INDIN). [Piscataway, NJ] : IEEE; 2023.'
conference:
end_date: 2023-07-20
location: Lemgo
name: 21st International Conference on Industrial Informatics (INDIN 2023)
start_date: 2023-07-18
corporate_editor:
- 'Institute of Electrical and Electronics Engineers '
date_created: 2025-03-13T13:48:58Z
date_updated: 2025-03-13T14:44:34Z
department:
- _id: DEP5019
- _id: DEP5023
doi: 10.1109/indin51400.2023.10218318
editor:
- first_name: Helene
full_name: Dörksen, Helene
id: '46416'
last_name: Dörksen
- first_name: 'Stefano '
full_name: 'Scanzio, Stefano '
last_name: Scanzio
- first_name: Jürgen
full_name: Jasperneite, Jürgen
id: '1899'
last_name: Jasperneite
- first_name: Lukasz
full_name: Wisniewski, Lukasz
id: '1710'
last_name: Wisniewski
- first_name: 'Kim Fung '
full_name: 'Man, Kim Fung '
last_name: Man
- first_name: 'Thilo '
full_name: 'Sauter, Thilo '
last_name: Sauter
- first_name: 'Lucia '
full_name: 'Seno, Lucia '
last_name: Seno
- first_name: Henning
full_name: Trsek, Henning
id: '1486'
last_name: Trsek
orcid: 0000-0002-0133-0656
- first_name: 'Valeriy '
full_name: 'Vyatkin, Valeriy '
last_name: Vyatkin
keyword:
- multimodal sensing
- crystalline materials
- microstructure
- rotation measurement
- PCA
- calorimetry
- pharmaceuticals
- European Pharmacopoeia
language:
- iso: eng
place: '[Piscataway, NJ] '
publication: 2023 IEEE 21st International Conference on Industrial Informatics (INDIN)
publication_identifier:
eisbn:
- 978-1-6654-9313-0
isbn:
- 978-1-6654-9314-7
publication_status: published
publisher: IEEE
quality_controlled: '1'
status: public
title: A Novel Spectroscopic Approach for Vaseline Quality Discrimination
type: conference_editor_article
user_id: '83781'
year: '2023'
...
---
_id: '8436'
abstract:
- lang: eng
text: 'Today DC offers far-reaching advantages over AC. Therefore, many devices
have been equipped with an internal DC link for years. In the field of energy
supply, the use of DC technology is also growing and is state of the art e.g.
in offshore, high-voltage, automotive and data center applications. The spread
of industrial open DC grids is currently starting and is completely different
due to the requirements: The DC grid itself and energy flows in an industrial
environment are highly dynamic and bidirectional. Due to the low impedance electrical
connection of the DC links of many devices, stored energies in fault cases as
well as ripple currents during operation place particular requirements on the
devices.'
author:
- first_name: Simon
full_name: Puls, Simon
id: '85051'
last_name: Puls
- first_name: Jan-Niklas
full_name: Koch, Jan-Niklas
id: '58889'
last_name: Koch
- first_name: Martin
full_name: Ehlich, Martin
last_name: Ehlich
- first_name: Holger
full_name: Borcherding, Holger
id: '1693'
last_name: Borcherding
citation:
ama: Puls S, Koch JN, Ehlich M, Borcherding H. Particular Requirements on Drive
Inverters for Safe and Robust Operation on an Open Industrial DC Grid. IEEE;
2022.
apa: Puls, S., Koch, J.-N., Ehlich, M., & Borcherding, H. (2022). Particular
Requirements on Drive Inverters for Safe and Robust Operation on an Open Industrial
DC Grid. In EPE Proceeding 2022. 24th European Conference on Power Electronics
and Applications (EPE’22 ECCE Europe), Hannover. IEEE.
bjps: 'Puls S et al. (2022) Particular Requirements on Drive Inverters
for Safe and Robust Operation on an Open Industrial DC Grid. [Piscataway,
NJ]: IEEE.'
chicago: 'Puls, Simon, Jan-Niklas Koch, Martin Ehlich, and Holger Borcherding. Particular
Requirements on Drive Inverters for Safe and Robust Operation on an Open Industrial
DC Grid. EPE Proceeding 2022. European Conference on Power Electronics
and Applications. [Piscataway, NJ]: IEEE, 2022.'
chicago-de: 'Puls, Simon, Jan-Niklas Koch, Martin Ehlich und Holger Borcherding.
2022. Particular Requirements on Drive Inverters for Safe and Robust Operation
on an Open Industrial DC Grid. EPE Proceeding 2022. European Conference
on Power Electronics and Applications. [Piscataway, NJ]: IEEE.'
din1505-2-1: 'Puls, Simon ; Koch, Jan-Niklas ; Ehlich,
Martin ; Borcherding, Holger:
Particular Requirements on Drive Inverters for Safe and Robust Operation on
an Open Industrial DC Grid, European Conference on Power Electronics and
Applications. [Piscataway, NJ] : IEEE, 2022'
havard: S. Puls, J.-N. Koch, M. Ehlich, H. Borcherding, Particular Requirements
on Drive Inverters for Safe and Robust Operation on an Open Industrial DC Grid,
IEEE, [Piscataway, NJ], 2022.
ieee: 'S. Puls, J.-N. Koch, M. Ehlich, and H. Borcherding, Particular Requirements
on Drive Inverters for Safe and Robust Operation on an Open Industrial DC Grid.
[Piscataway, NJ]: IEEE, 2022.'
mla: Puls, Simon, et al. “Particular Requirements on Drive Inverters for Safe and
Robust Operation on an Open Industrial DC Grid.” EPE Proceeding 2022, IEEE,
2022.
short: S. Puls, J.-N. Koch, M. Ehlich, H. Borcherding, Particular Requirements on
Drive Inverters for Safe and Robust Operation on an Open Industrial DC Grid, IEEE,
[Piscataway, NJ], 2022.
ufg: 'Puls, Simon u. a.: Particular Requirements on Drive Inverters for Safe
and Robust Operation on an Open Industrial DC Grid, [Piscataway, NJ] 2022 (European
Conference on Power Electronics and Applications).'
van: 'Puls S, Koch JN, Ehlich M, Borcherding H. Particular Requirements on Drive
Inverters for Safe and Robust Operation on an Open Industrial DC Grid. EPE Proceeding
2022. [Piscataway, NJ]: IEEE; 2022. (European Conference on Power Electronics
and Applications).'
conference:
end_date: 2022-09-09
location: Hannover
name: 24th European Conference on Power Electronics and Applications (EPE'22 ECCE
Europe)
start_date: 2022-09-05
date_created: 2022-07-05T14:00:56Z
date_updated: 2025-06-26T13:36:25Z
department:
- _id: DEP6020
keyword:
- Industries
- Semiconductor device measurement
- Capacitors
- Europe
- High-voltage techniques
- Inverters
- Circuit faults
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://ieeexplore.ieee.org/document/9907118
oa: '1'
place: '[Piscataway, NJ]'
publication: EPE Proceeding 2022
publication_identifier:
isbn:
- 978-9-0758-1539-9
issn:
- 2325-0313
publication_status: published
publisher: IEEE
series_title: European Conference on Power Electronics and Applications
status: public
title: Particular Requirements on Drive Inverters for Safe and Robust Operation on
an Open Industrial DC Grid
type: conference_editor_article
user_id: '83781'
year: '2022'
...
---
_id: '9211'
abstract:
- lang: eng
text: Lifetime tests of connectors are time consuming and labor intensive. Our study
reveals a strong correlation between the statistical characteristics of contact
resistance development in the early stages of lifetime tests and the final results
of the tests. This correlation enables a further time lapse of lifetime tests
and the prediction of the state of the health of connectors which can be utilized
in the development of diagnostic strategy in sophisticated networks with very
high number of connectors as well as in a quick classification of connectors with
respect to their design features. Methods of statistical evaluation are introduced
and the sensitivity analyses of different characteristics for the state of health
of connectors are conducted.
author:
- first_name: Jian
full_name: Song, Jian
id: '5297'
last_name: Song
- first_name: Abhay Rammurti
full_name: Shukla, Abhay Rammurti
id: '72757'
last_name: Shukla
- first_name: Roman
full_name: Probst, Roman
id: '69156'
last_name: Probst
citation:
ama: Song J, Shukla AR, Probst R. State of Health of Connectors – Early Indicators.
IEEE; 2022:272-278. doi:10.1109/HLM54538.2022.9969839
apa: 'Song, J., Shukla, A. R., & Probst, R. (2022). State of Health of Connectors
– Early Indicators. In Electrical contacts - 2022 : proceedings of the Sixty-Seventh
IEEE Holm Conference on Electrical Contacts (pp. 272–278). IEEE. https://doi.org/10.1109/HLM54538.2022.9969839'
bjps: 'Song J, Shukla AR and Probst R (2022) State of Health of Connectors
– Early Indicators. Piscataway, NJ: IEEE.'
chicago: 'Song, Jian, Abhay Rammurti Shukla, and Roman Probst. State of Health
of Connectors – Early Indicators. Electrical Contacts - 2022 : Proceedings
of the Sixty-Seventh IEEE Holm Conference on Electrical Contacts. Piscataway,
NJ: IEEE, 2022. https://doi.org/10.1109/HLM54538.2022.9969839.'
chicago-de: 'Song, Jian, Abhay Rammurti Shukla und Roman Probst. 2022. State
of Health of Connectors – Early Indicators. Electrical contacts - 2022 :
proceedings of the Sixty-Seventh IEEE Holm Conference on Electrical Contacts.
Piscataway, NJ: IEEE. doi:10.1109/HLM54538.2022.9969839,
.'
din1505-2-1: 'Song, Jian ; Shukla,
Abhay Rammurti ; Probst, Roman:
State of Health of Connectors – Early Indicators. Piscataway, NJ : IEEE,
2022'
havard: J. Song, A.R. Shukla, R. Probst, State of Health of Connectors – Early Indicators,
IEEE, Piscataway, NJ, 2022.
ieee: 'J. Song, A. R. Shukla, and R. Probst, State of Health of Connectors –
Early Indicators. Piscataway, NJ: IEEE, 2022, pp. 272–278. doi: 10.1109/HLM54538.2022.9969839.'
mla: 'Song, Jian, et al. “State of Health of Connectors – Early Indicators.” Electrical
Contacts - 2022 : Proceedings of the Sixty-Seventh IEEE Holm Conference on Electrical
Contacts, IEEE, 2022, pp. 272–78, https://doi.org/10.1109/HLM54538.2022.9969839.'
short: J. Song, A.R. Shukla, R. Probst, State of Health of Connectors – Early Indicators,
IEEE, Piscataway, NJ, 2022.
ufg: 'Song, Jian/Shukla, Abhay Rammurti/Probst, Roman: State of Health of
Connectors – Early Indicators, Piscataway, NJ 2022.'
van: 'Song J, Shukla AR, Probst R. State of Health of Connectors – Early Indicators.
Electrical contacts - 2022 : proceedings of the Sixty-Seventh IEEE Holm Conference
on Electrical Contacts. Piscataway, NJ: IEEE; 2022.'
conference:
end_date: 2022-10-26
location: Tampa, FL, USA
name: 67th Holm Conference on Electrical Contacts
start_date: 2022-10-23
date_created: 2022-12-11T13:50:30Z
date_updated: 2024-08-05T08:01:22Z
department:
- _id: DEP6012
doi: 10.1109/HLM54538.2022.9969839
keyword:
- Connectors
- Correlation
- Sensitivity analysis
- Contact resistance
- Lifetime estimation
- Reliability
- Electrical resistance measurement
language:
- iso: eng
page: 272 - 278
place: Piscataway, NJ
publication: 'Electrical contacts - 2022 : proceedings of the Sixty-Seventh IEEE Holm
Conference on Electrical Contacts'
publication_identifier:
eisbn:
- 978-1-6654-5965-5
isbn:
- 978-1-6654-5966-2
- 978-1-6654-5967-9
issn:
- 2158-9992
publication_status: published
publisher: IEEE
status: public
title: State of Health of Connectors – Early Indicators
type: conference_editor_article
user_id: '83781'
year: '2022'
...
---
_id: '6884'
abstract:
- lang: eng
text: Product variety and short product life cycles are characteristic features
of modern assembly systems. When variety gets very high, assembly processes usually
become very complex, leading to time losses, human errors, and other negative
impacts of system performance. In order to prevent such performance declines different
informational assistance systems become part of manual assembly systems, offering
additional instructions concerning handling and insertion. Otherwise, such systems
can result in additional cognitive load rather than decreasing it. Using mobile
physiological measures like heart rate variability (HRV) and eye movements just
in time changes of overall cognitive load are detectable. As expected, these data
indicate increases of mental workload when task demands are becoming more complex.
Practical and theoretical concerns, limitations and chances will be discussed.
author:
- first_name: Dominic
full_name: Bläsing, Dominic
last_name: Bläsing
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Manfred
full_name: Bornewasser, Manfred
last_name: Bornewasser
citation:
ama: 'Bläsing D, Hinrichsen S, Bornewasser M. Reduction of Cognitive Load in Complex
Assembly Systems. In: Ahram T, Taiar R, Gremeaux-Bader V, Aminian K, eds. Advances
in Intelligent Systems and Computing. Advances in Intelligent Systems and
Computing. Cham: Springer; 2020:495-500. doi:10.1007/978-3-030-44267-5_75'
apa: 'Bläsing, D., Hinrichsen, S., & Bornewasser, M. (2020). Reduction of Cognitive
Load in Complex Assembly Systems. In T. Ahram , R. Taiar, V. Gremeaux-Bader ,
& K. Aminian (Eds.), Advances in Intelligent Systems and Computing
(pp. 495–500). Cham: Springer. https://doi.org/10.1007/978-3-030-44267-5_75'
bjps: 'Bläsing D, Hinrichsen S and Bornewasser M (2020) Reduction of Cognitive
Load in Complex Assembly Systems. In Ahram T et al. (eds), Advances in Intelligent
Systems and Computing. Cham: Springer, pp. 495–500.'
chicago: 'Bläsing, Dominic, Sven Hinrichsen, and Manfred Bornewasser. “Reduction
of Cognitive Load in Complex Assembly Systems.” In Advances in Intelligent
Systems and Computing, edited by T. Ahram , R. Taiar, V. Gremeaux-Bader ,
and K. Aminian, 495–500. Advances in Intelligent Systems and Computing. Cham:
Springer, 2020. https://doi.org/10.1007/978-3-030-44267-5_75.'
chicago-de: 'Bläsing, Dominic, Sven Hinrichsen und Manfred Bornewasser. 2020. Reduction
of Cognitive Load in Complex Assembly Systems. In: Advances in Intelligent
Systems and Computing, hg. von T. Ahram , R. Taiar, V. Gremeaux-Bader , und
K. Aminian, 495–500. Advances in Intelligent Systems and Computing. Cham: Springer.
doi:10.1007/978-3-030-44267-5_75,
.'
din1505-2-1: 'Bläsing, Dominic ; Hinrichsen, Sven ; Bornewasser,
Manfred: Reduction of Cognitive Load in Complex Assembly Systems. In: Ahram , T. ; Taiar,
R. ; Gremeaux-Bader , V.
; Aminian, K. (Hrsg.): Advances
in Intelligent Systems and Computing, Advances in Intelligent Systems and
Computing. Cham : Springer, 2020, S. 495–500'
havard: 'D. Bläsing, S. Hinrichsen, M. Bornewasser, Reduction of Cognitive Load
in Complex Assembly Systems, in: T. Ahram , R. Taiar, V. Gremeaux-Bader , K. Aminian
(Eds.), Advances in Intelligent Systems and Computing, Springer, Cham, 2020: pp.
495–500.'
ieee: 'D. Bläsing, S. Hinrichsen, and M. Bornewasser, “Reduction of Cognitive Load
in Complex Assembly Systems,” in Advances in Intelligent Systems and Computing,
T. Ahram , R. Taiar, V. Gremeaux-Bader , and K. Aminian, Eds. Cham: Springer,
2020, pp. 495–500.'
mla: Bläsing, Dominic, et al. “Reduction of Cognitive Load in Complex Assembly Systems.”
Advances in Intelligent Systems and Computing, edited by T. Ahram et al.,
Springer, 2020, pp. 495–500, doi:10.1007/978-3-030-44267-5_75.
short: 'D. Bläsing, S. Hinrichsen, M. Bornewasser, in: T. Ahram , R. Taiar, V. Gremeaux-Bader
, K. Aminian (Eds.), Advances in Intelligent Systems and Computing, Springer,
Cham, 2020, pp. 495–500.'
ufg: 'Bläsing, Dominic et. al. (2020): Reduction of Cognitive Load in Complex
Assembly Systems, in: T. Ahram et. al. (Hgg.): Advances in Intelligent Systems
and Computing (=Advances in Intelligent Systems and Computing), Cham,
S. 495–500.'
van: 'Bläsing D, Hinrichsen S, Bornewasser M. Reduction of Cognitive Load in Complex
Assembly Systems. In: Ahram T, Taiar R, Gremeaux-Bader V, Aminian K, editors.
Advances in Intelligent Systems and Computing. Cham: Springer; 2020. p. 495–500.
(Advances in Intelligent Systems and Computing).'
conference:
name: Human Interaction, Emerging Technologies and Future Applications II. IHIET
2020
date_created: 2021-12-13T08:40:06Z
date_updated: 2023-03-15T13:50:08Z
department:
- _id: DEP7020
- _id: DEP1305
doi: 10.1007/978-3-030-44267-5_75
editor:
- first_name: T.
full_name: Ahram , T.
last_name: 'Ahram '
- first_name: R.
full_name: Taiar, R.
last_name: Taiar
- first_name: V.
full_name: Gremeaux-Bader , V.
last_name: 'Gremeaux-Bader '
- first_name: K.
full_name: Aminian, K.
last_name: Aminian
keyword:
- Assembly assistance systems
- Manual assembly
- Cognitive load
- Physiological measurement
- Heart rate variability
language:
- iso: eng
page: 495 - 500
place: Cham
project:
- _id: FBB6D104-44D9-11E9-AA25-B54CDB794CE1
name: Montexas 4.0
publication: Advances in Intelligent Systems and Computing
publication_identifier:
isbn:
- '9783030442668'
- '9783030442675'
issn:
- 2194-5357
- 2194-5365
publication_status: published
publisher: Springer
quality_controlled: '1'
series_title: Advances in Intelligent Systems and Computing
status: public
title: Reduction of Cognitive Load in Complex Assembly Systems
type: book_chapter
user_id: '49010'
year: 2020
...
---
_id: '4919'
abstract:
- lang: eng
text: "AbstractThe industrial production ofwood-based compo-sites (WBCs) features
the core processes in theforming and press line,which are characterisedby densification
and the curing of resin-blended furnish materialto obtain a panel from a formed
mat in a continuous or batch-wise process.Here, the reliable measurement of process
parameters and panel properties is indispensablefor moni-toring and controllingproductionand
quality.The in-plane area density(\U0001D70CA)of the mat and the raw density(\U0001D70C)of
the panel,along withits vertical rawdensity profile (RDP),aretypically determined
through nondestructivemeans of radiometric de-vices.X-ray systems for density
\ measurement on WBCsare commonly usedin both industry and research. Theyfollow
a similar basic princi-pleof radiation transmissionwith specificsetups depending
\ onthe measuring taskat hand. De-tector signalsare evaluated regarding
relative radiation transmission, which is well-knownto followBeer’s law of
\ exponential attenuation.Note here, particular conditions regarding radia-tion
\ (energyand beam geometry) and material properties (consistent and homogeneous)
\ are expected. These conditions, however, cannot be consistently achieved in
\ applied radiometric in-vestigationson WBCs [...]"
- lang: ger
text: "AbstractXVIIprovided by the present thesis. The practicalim-plementation,
\ however,must consequentlybe performed by the device manufactures. The us-ers
of such modern X-raysystems are enabledto obtain enhanced quality of their measuring
re-sults, which is relevant for both WBC science(wide range of partly
\ new composites) and in-dustry (increasing requirements on reliability and
accuracy).Eventually, the properapplication of capable nondestructive evaluation
\ methods by valid and precise measuring systems for moni-toring and controllingquality
and processparam-etersin WBC production offersthe possibility ofachievingsavings
\ in raw materials and energy consumption as well as fundamental
\ ap-proaches forimprovingWBC production, thus,to optimise processconditionsand
\ materialprop-ertiesin general.\r\nKurzfassungDie industrielle Produktion von
plattenförmigen Holzwerkstoffen (HWS) wirdmaßgeblich durchdie Kernprozessein
der Form-und Pressen-straßebestimmt. Die Plattenherstellung ist durch die Verdichtung
und Aushärtung von geformten Mattenaus beleimtenHolzpartikelngekenn-zeichnet,
was in kontinuierlichen oder taktwei-sen Prozessenerfolgt. Dabei ist diezuverlässige
Messung von Prozessparametern und Plattenei-genschaften fürdieÜberwachung und
\ Steue-rung von Produktion und Qualitätunabdingbar. Die Bestimmung des Flächengewichts(Flächen-dichte
\U0001D70CA)der Matte und der Rohdichte(\U0001D70C)der Platte sowie des
vertikalen Rohdichteprofils (RDP) erfolgt für gewöhnlich zerstörungsfrei mit-tels
\ radiometrischer Geräte. Heute sind sowohl in der Industrie als auch in der
Forschung Rönt-gensysteme zur Dichtemessung (Densitometrie) an Holz und Holzwerkstoffen
verbreitet. Deren Grundprinzip zur Durchstrahlung ist ähnlich, wo-hingegen sich
der jeweilige Aufbau in Abhängig-keit der Messaufgabeund auch in Bezug auf den
Geräteherstellerunterscheidet. Die aus den ge-messenen Detektorsignalen ausgewertete
\ rela-tive Durchstrahlung kann durch das hinlänglich bekannte Beer’scheGesetzfür
die exponentielle Schwächungbeschrieben werden. Die Gültigkeit setzt bestimmte
\ Bedingungen in Bezug auf Strahlung (Energie und Strahlgeometrie) und
Materialeigenschaften (konsistentund homo-gen) voraus, die bei radiometrischen
Untersu-chungen an HWSin der allgemeinen Praxis je-doch nicht angemessen erfüllt
\ werden können [...]"
alternative_title:
- Angewandte Untersuchungen an Holzwerkstoffen im Zusammenhang mit der Dichtemessung
mittels Röntgenstrahlung
author:
- first_name: Konrad
full_name: Solbrig, Konrad
id: '59789'
last_name: Solbrig
citation:
ama: 'Solbrig K. Applied Investigations on Wood-Based Composites in the Context
of X-Ray Densitometry. Hamburg : Staats- und Universitätsbibliothek Hamburg
Carl von Ossietzky ; 2019.'
apa: 'Solbrig, K. (2019). Applied Investigations on Wood-Based Composites in
the Context of X-Ray Densitometry. Hamburg : Staats- und Universitätsbibliothek
Hamburg Carl von Ossietzky .'
bjps: 'Solbrig K (2019) Applied Investigations on Wood-Based Composites
in the Context of X-Ray Densitometry. Hamburg : Staats- und Universitätsbibliothek
Hamburg Carl von Ossietzky .'
chicago: 'Solbrig, Konrad. Applied Investigations on Wood-Based Composites in
the Context of X-Ray Densitometry. Hamburg : Staats- und Universitätsbibliothek
Hamburg Carl von Ossietzky , 2019.'
chicago-de: 'Solbrig, Konrad. 2019. Applied Investigations on Wood-Based Composites
in the Context of X-Ray Densitometry. Hamburg : Staats- und Universitätsbibliothek
Hamburg Carl von Ossietzky .'
din1505-2-1: 'Solbrig, Konrad: Applied
Investigations on Wood-Based Composites in the Context of X-Ray Densitometry.
Hamburg : Staats- und Universitätsbibliothek Hamburg Carl von Ossietzky , 2019'
havard: K. Solbrig, Applied Investigations on Wood-Based Composites in the Context
of X-Ray Densitometry, Staats- und Universitätsbibliothek Hamburg Carl von Ossietzky
, Hamburg , 2019.
ieee: 'K. Solbrig, Applied Investigations on Wood-Based Composites in the Context
of X-Ray Densitometry. Hamburg : Staats- und Universitätsbibliothek Hamburg
Carl von Ossietzky , 2019.'
mla: Solbrig, Konrad. Applied Investigations on Wood-Based Composites in the
Context of X-Ray Densitometry. Staats- und Universitätsbibliothek Hamburg
Carl von Ossietzky , 2019.
short: K. Solbrig, Applied Investigations on Wood-Based Composites in the Context
of X-Ray Densitometry, Staats- und Universitätsbibliothek Hamburg Carl von Ossietzky
, Hamburg , 2019.
ufg: 'Solbrig, Konrad (2019): Applied Investigations on Wood-Based Composites
in the Context of X-Ray Densitometry, Hamburg .'
van: 'Solbrig K. Applied Investigations on Wood-Based Composites in the Context
of X-Ray Densitometry. Hamburg : Staats- und Universitätsbibliothek Hamburg Carl
von Ossietzky ; 2019. 453 p.'
date_created: 2021-02-09T09:31:41Z
date_updated: 2023-03-15T13:49:56Z
ddc:
- '660'
keyword:
- density measurement
- radiation transmission
- porous low-Z composite material
- true density
- elemental composition and ash content
- effective atomic number
- mass attenuation coefficient
- X-ray energy spectrum
- law of attenuation
- beam hardening and radiation build-up
- radiation-physical interdependencies
- Dichtemessung
- Durchstrahlung
- poröser Verbundwerkstoff
- Reindichte
- elementare Zusammensetzung und Aschegehalt
- effektive Ordnungszahl
- Massenschwächungskoeffizient
- Röntgenspektrum
- Schwächungsgesetz
- Strahlaufhärtung und Strahlungsaufbau
- strahlungsphysikalische Wechselbeziehungen
language:
- iso: eng
main_file_link:
- open_access: '1'
url: 'https://ediss.sub.uni-hamburg.de/handle/ediss/8756 '
oa: '1'
page: '453'
place: 'Hamburg '
publication_status: published
publisher: 'Staats- und Universitätsbibliothek Hamburg Carl von Ossietzky '
status: public
supervisor:
- first_name: Jörg
full_name: Ressel, Jörg
last_name: Ressel
- first_name: Heiko
full_name: Thömen, Heiko
last_name: Thömen
title: Applied Investigations on Wood-Based Composites in the Context of X-Ray Densitometry
type: dissertation
urn: urn:nbn:de:gbv:18-ediss-89270
user_id: '68554'
year: 2019
...
---
_id: '2005'
abstract:
- lang: eng
text: We present a method for the fast and robust linear classification of badly
conditioned data. In our considerations, badly conditioned data are such data
which are numerically difficult to handle. Due to, e.g. a large number of features
or a large number of objects representing classes as well as noise, outliers or
incompleteness, the common software computation of the discriminating linear combination
of features between classes fails or is extremely time consuming. The theoretical
foundations of our approach are based on the single feature ranking, which allows
fast calculation of the approximative initial classification boundary. For the
increasing of classification accuracy of this boundary, the refinement is performed
in the lower dimensional space. Our approach is tested on several datasets from
UCI Reposi-tiory. Experimental results indicate high classification accuracy of
the approach. For the modern real industrial applications such a method is especially
suitable in the Cyber-Physical-System environments and provides a part of the
workflow for the automated classifier design
author:
- first_name: Helene
full_name: Dörksen, Helene
id: '46416'
last_name: Dörksen
- first_name: Volker
full_name: Lohweg, Volker
id: '1804'
last_name: Lohweg
orcid: 0000-0002-3325-7887
citation:
ama: 'Dörksen H, Lohweg V. Linear Classification of Badly Conditioned Data. . In:
23rd IEEE International Conference on Emerging Technologies and Factory Automation
(ETFA). Torino, Italy; 2018. doi:10.1109/ETFA.2018.8502485'
apa: Dörksen, H., & Lohweg, V. (2018). Linear Classification of Badly Conditioned
Data. . In 23rd IEEE International Conference on Emerging Technologies and
Factory Automation (ETFA). Torino, Italy. https://doi.org/10.1109/ETFA.2018.8502485
bjps: Dörksen H and Lohweg V (2018) Linear Classification of Badly Conditioned
Data. . 23rd IEEE International Conference on Emerging Technologies and Factory
Automation (ETFA). Torino, Italy.
chicago: Dörksen, Helene, and Volker Lohweg. “Linear Classification of Badly Conditioned
Data. .” In 23rd IEEE International Conference on Emerging Technologies and
Factory Automation (ETFA). Torino, Italy, 2018. https://doi.org/10.1109/ETFA.2018.8502485.
chicago-de: 'Dörksen, Helene und Volker Lohweg. 2018. Linear Classification of Badly
Conditioned Data. . In: 23rd IEEE International Conference on Emerging Technologies
and Factory Automation (ETFA). Torino, Italy. doi:10.1109/ETFA.2018.8502485,
.'
din1505-2-1: 'Dörksen, Helene ; Lohweg, Volker: Linear Classification
of Badly Conditioned Data. . In: 23rd IEEE International Conference on Emerging
Technologies and Factory Automation (ETFA). Torino, Italy, 2018'
havard: 'H. Dörksen, V. Lohweg, Linear Classification of Badly Conditioned Data.
, in: 23rd IEEE International Conference on Emerging Technologies and Factory
Automation (ETFA), Torino, Italy, 2018.'
ieee: H. Dörksen and V. Lohweg, “Linear Classification of Badly Conditioned Data.
,” in 23rd IEEE International Conference on Emerging Technologies and Factory
Automation (ETFA), Turin, Italy , 2018.
mla: Dörksen, Helene, and Volker Lohweg. “Linear Classification of Badly Conditioned
Data. .” 23rd IEEE International Conference on Emerging Technologies and Factory
Automation (ETFA), 2018, doi:10.1109/ETFA.2018.8502485.
short: 'H. Dörksen, V. Lohweg, in: 23rd IEEE International Conference on Emerging
Technologies and Factory Automation (ETFA), Torino, Italy, 2018.'
ufg: 'Dörksen, Helene/Lohweg, Volker (2018): Linear Classification of Badly
Conditioned Data. , in: 23rd IEEE International Conference on Emerging Technologies
and Factory Automation (ETFA), Torino, Italy.'
van: 'Dörksen H, Lohweg V. Linear Classification of Badly Conditioned Data. . In:
23rd IEEE International Conference on Emerging Technologies and Factory Automation
(ETFA). Torino, Italy; 2018.'
conference:
end_date: 2018-09-07
location: ' Turin, Italy '
name: ' IEEE 23rd International Conference on Emerging Technologies and Factory
Automation (ETFA) 2018'
start_date: 2018-09-04
date_created: 2019-11-25T08:35:44Z
date_updated: 2023-03-15T13:49:38Z
department:
- _id: DEP5023
doi: 10.1109/ETFA.2018.8502485
keyword:
- Task analysis
- Software
- Linear discriminant analysis
- Dimensionality reduction
- Mathematical model
- Covariance matrices
- Measurement
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8502485
oa: '1'
place: Torino, Italy
publication: 23rd IEEE International Conference on Emerging Technologies and Factory
Automation (ETFA)
status: public
title: 'Linear Classification of Badly Conditioned Data. '
type: conference
user_id: '15514'
year: 2018
...
---
_id: '2007'
abstract:
- lang: eng
text: Multisensor systems are susceptible to sensor ageing effects as well as to
environmental changes. Due to these effects, the distribution of sensor measurements
may change over time, which is referred to as sensor drift. A multisensor system
which adapts to drift by self-monitoring is more durable, requires less manual
maintenance, and provides information of higher quality. This contribution proposes
an approach for detecting and adapting to sensor drift. The proposed detection
algorithm determines the reliability of a sensor based on fuzzy pattern classifiers
and a consistency measure. By this means, the inherent redundancy in multisensor
systems is exploited to detect drift. Detected drift leads then to a retraining
of the classifier on batched data guided by information fusion. The retraining
incorporates the estimated magnitude of the drift. The proposed algorithms are
evaluated in comparison with state-of-the-art methods in the scope of a publicly
available dataset. It is shown that the drift detection algorithm yields results
similar to the benchmark algorithm but is less computationally complex. Relearning
with the drift-adapted approach results in more robust classifiers with regard
to potential future drift.
author:
- first_name: Christoph-Alexander
full_name: Holst, Christoph-Alexander
id: '64782'
last_name: Holst
- first_name: Volker
full_name: Lohweg, Volker
id: '1804'
last_name: Lohweg
orcid: 0000-0002-3325-7887
citation:
ama: 'Holst C-A, Lohweg V. A Conflict-Based Drift Detection And Adaptation Approach
for Multisensor Information Fusion. In: 23rd IEEE International Conference
on Emerging Technologies and Factory Automation (ETFA). Torino, Italy; 2018.
doi:10.1109/ETFA.2018.8502571'
apa: Holst, C.-A., & Lohweg, V. (2018). A Conflict-Based Drift Detection And
Adaptation Approach for Multisensor Information Fusion. In 23rd IEEE International
Conference on Emerging Technologies and Factory Automation (ETFA). Torino,
Italy. https://doi.org/10.1109/ETFA.2018.8502571
bjps: Holst C-A and Lohweg V (2018) A Conflict-Based Drift Detection And
Adaptation Approach for Multisensor Information Fusion. 23rd IEEE International
Conference on Emerging Technologies and Factory Automation (ETFA). Torino,
Italy.
chicago: Holst, Christoph-Alexander, and Volker Lohweg. “A Conflict-Based Drift
Detection And Adaptation Approach for Multisensor Information Fusion.” In 23rd
IEEE International Conference on Emerging Technologies and Factory Automation
(ETFA). Torino, Italy, 2018. https://doi.org/10.1109/ETFA.2018.8502571.
chicago-de: 'Holst, Christoph-Alexander und Volker Lohweg. 2018. A Conflict-Based
Drift Detection And Adaptation Approach for Multisensor Information Fusion. In:
23rd IEEE International Conference on Emerging Technologies and Factory Automation
(ETFA). Torino, Italy. doi:10.1109/ETFA.2018.8502571,
.'
din1505-2-1: 'Holst, Christoph-Alexander
; Lohweg, Volker: A Conflict-Based
Drift Detection And Adaptation Approach for Multisensor Information Fusion. In:
23rd IEEE International Conference on Emerging Technologies and Factory Automation
(ETFA). Torino, Italy, 2018'
havard: 'C.-A. Holst, V. Lohweg, A Conflict-Based Drift Detection And Adaptation
Approach for Multisensor Information Fusion, in: 23rd IEEE International Conference
on Emerging Technologies and Factory Automation (ETFA), Torino, Italy, 2018.'
ieee: C.-A. Holst and V. Lohweg, “A Conflict-Based Drift Detection And Adaptation
Approach for Multisensor Information Fusion,” in 23rd IEEE International Conference
on Emerging Technologies and Factory Automation (ETFA), Torino, Italy, 2018.
mla: Holst, Christoph-Alexander, and Volker Lohweg. “A Conflict-Based Drift Detection
And Adaptation Approach for Multisensor Information Fusion.” 23rd IEEE International
Conference on Emerging Technologies and Factory Automation (ETFA), 2018, doi:10.1109/ETFA.2018.8502571.
short: 'C.-A. Holst, V. Lohweg, in: 23rd IEEE International Conference on Emerging
Technologies and Factory Automation (ETFA), Torino, Italy, 2018.'
ufg: 'Holst, Christoph-Alexander/Lohweg, Volker (2018): A Conflict-Based
Drift Detection And Adaptation Approach for Multisensor Information Fusion, in:
23rd IEEE International Conference on Emerging Technologies and Factory Automation
(ETFA), Torino, Italy.'
van: 'Holst C-A, Lohweg V. A Conflict-Based Drift Detection And Adaptation Approach
for Multisensor Information Fusion. In: 23rd IEEE International Conference on
Emerging Technologies and Factory Automation (ETFA). Torino, Italy; 2018.'
conference:
end_date: 2018-09-07
location: Torino, Italy
name: IEEE 23rd International Conference on Emerging Technologies and Factory Automation
(ETFA) 2018
start_date: 2018-09-04
date_created: 2019-11-25T08:35:47Z
date_updated: 2023-03-15T13:49:38Z
department:
- _id: DEP5023
doi: 10.1109/ETFA.2018.8502571
keyword:
- Multisensor systems
- Temperature measurement
- Current measurement
- Redundancy
- Pollution measurement
- Detection algorithms
language:
- iso: eng
main_file_link:
- url: https://ieeexplore.ieee.org/abstract/document/8502571
place: Torino, Italy
publication: 23rd IEEE International Conference on Emerging Technologies and Factory
Automation (ETFA)
publication_status: published
status: public
title: A Conflict-Based Drift Detection And Adaptation Approach for Multisensor Information
Fusion
type: conference
user_id: '15514'
year: 2018
...
---
_id: '222'
abstract:
- lang: ger
text: Die Komplexität in der manuellen Montage steigt. In der sog. Mehrprodukt-
oder Variantenmontage hat der Beschäftigte permanent zwischen verschiedenen Alternativen
auszuwählen. Dies betrifft z.B. zu montierende Teile, Werkzeuge, Fügeverfahren
oder Hilfsmittel, die in ganz unterschiedlichen Kombinationen zu verwenden sind.
Der Montageprozess wird dadurch aus Sicht des Beschäftigten zu einem kontinuierlichen
Auswahlprozess. Dieser stellt zunehmend höhere informatorische und kognitive Anforderungen
und steigert die mentale Beanspruchung. Dies hat negative Auswirkungen auf die
Arbeitsproduktivität. Informatorische Assistenzsysteme gelten als geeignete Instrumente,
moderierenden Einfluss auf diese Entwicklung zu nehmen. Entscheidende Stellgrößen
dabei betreffen Fragen, wie komplex die Anforderungen und wie ausgeprägt die subjektiven
Ressourcen sowie die mentalen Beanspruchungen sind. Aus diesen Überlegungen werden
Empfehlungen zur Gestaltung von informatorischen Assistenzsystemen abgeleitet.
- lang: eng
text: "Manual assembly increases in complexity. In the so-called multi-product-
or mixed-model-assembly, the employee has to constantly make choices between different
alternatives. This concerns e. g. parts to be assembled, tools, fixing methods
or materials that can be processed in very different combinations. From the perspective
of a worker the assembly process becomes a continuous choice process, setting
increasingly higher informational and cognitive demands and increasing mental
strain. This has a negative impact on labor productivity. Information Assistance
Systems are considered appropriate tools to take moderating influence on this
development. However, it should be considered how complex demands are as well
as how pronounced subjective resources and mental strain are. Based on these considerations,
recommendations for the design of information assistance systems are derived.\r\n\r\nPractical
Relevance: Manufacturing industry faces the demanding task of producing more and
more product variants even in manual assembly. As a result, assembly workers have
to process more information and are therefore exposed to greater stress. In order
to avoid the resulting loss of labor productivity, assembly systems are increasingly
integrating informational assistance systems that, on the one hand, support cognitive
processing and, on the other hand, reduce stress. Various design recommendations
are given for such informational assistance systems."
author:
- first_name: Manfred
full_name: Bornewasser, Manfred
last_name: Bornewasser
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Dominic
full_name: Bläsing, Dominic
last_name: Bläsing
citation:
ama: 'Bornewasser M, Hinrichsen S, Bläsing D. Informatorische Assistenzsysteme in
der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung?
Zeitschrift für Arbeitswissenschaft. 2018;72(4):264-275. doi:https://doi.org/10.1007/s41449-018-0123-x'
apa: 'Bornewasser, M., Hinrichsen, S., & Bläsing, D. (2018). Informatorische
Assistenzsysteme in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion
mentaler Beanspruchung? Zeitschrift für Arbeitswissenschaft, 72(4),
264–275. https://doi.org/10.1007/s41449-018-0123-x'
bjps: 'Bornewasser M, Hinrichsen S and Bläsing D (2018) Informatorische Assistenzsysteme
in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung?
Zeitschrift für Arbeitswissenschaft 72, 264–275.'
chicago: 'Bornewasser, Manfred, Sven Hinrichsen, and Dominic Bläsing. “Informatorische
Assistenzsysteme in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion
mentaler Beanspruchung?” Zeitschrift für Arbeitswissenschaft 72, no. 4
(2018): 264–75. https://doi.org/10.1007/s41449-018-0123-x.'
chicago-de: 'Bornewasser, Manfred, Sven Hinrichsen und Dominic Bläsing. 2018. Informatorische
Assistenzsysteme in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion
mentaler Beanspruchung? Zeitschrift für Arbeitswissenschaft 72, Nr. 4:
264–275. doi:https://doi.org/10.1007/s41449-018-0123-x,
.'
din1505-2-1: 'Bornewasser, Manfred
; Hinrichsen, Sven ; Bläsing,
Dominic: Informatorische Assistenzsysteme in der manuellen Montage: Ein
nützliches Werkzeug zur Reduktion mentaler Beanspruchung? In: Zeitschrift für
Arbeitswissenschaft Bd. 72. Berlin Heidelberg, Springer (2018), Nr. 4, S. 264–275'
havard: 'M. Bornewasser, S. Hinrichsen, D. Bläsing, Informatorische Assistenzsysteme
in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung?,
Zeitschrift für Arbeitswissenschaft. 72 (2018) 264–275.'
ieee: 'M. Bornewasser, S. Hinrichsen, and D. Bläsing, “Informatorische Assistenzsysteme
in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung?,”
Zeitschrift für Arbeitswissenschaft, vol. 72, no. 4, pp. 264–275, 2018.'
mla: 'Bornewasser, Manfred, et al. “Informatorische Assistenzsysteme in der manuellen
Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung?” Zeitschrift
für Arbeitswissenschaft, vol. 72, no. 4, Springer, 2018, pp. 264–75, doi:https://doi.org/10.1007/s41449-018-0123-x.'
short: M. Bornewasser, S. Hinrichsen, D. Bläsing, Zeitschrift für Arbeitswissenschaft
72 (2018) 264–275.
ufg: 'Bornewasser, Manfred et. al. (2018): Informatorische Assistenzsysteme
in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung?,
in: Zeitschrift für Arbeitswissenschaft 72 (4), S. 264–275.'
van: 'Bornewasser M, Hinrichsen S, Bläsing D. Informatorische Assistenzsysteme in
der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung?
Zeitschrift für Arbeitswissenschaft. 2018;72(4):264–75.'
date_created: 2018-11-06T13:25:05Z
date_updated: 2023-03-15T13:49:39Z
department:
- _id: DEP7020
- _id: DEP1305
doi: https://doi.org/10.1007/s41449-018-0123-x
intvolume: ' 72'
issue: '4'
keyword:
- Complexity
- Mental workload
- Objective measurement
- Informational assistance systems
- Cognitive ergonomics
language:
- iso: ger
main_file_link:
- url: https://link.springer.com/article/10.1007%2Fs41449-018-0123-x#Abs2
page: 264-275
place: Berlin Heidelberg
project:
- _id: FBB6D104-44D9-11E9-AA25-B54CDB794CE1
name: Montexas 4.0
publication: Zeitschrift für Arbeitswissenschaft
publication_identifier:
issn:
- 0340-2444
publication_status: published
publisher: Springer
quality_controlled: '1'
related_material:
link:
- relation: contains
url: https://link.springer.com/article/10.1007%2Fs41449-018-0123-x#Abs2
status: public
title: 'Informatorische Assistenzsysteme in der manuellen Montage: Ein nützliches
Werkzeug zur Reduktion mentaler Beanspruchung?'
type: journal_article
user_id: '49010'
volume: 72
year: 2018
...
---
_id: '2372'
abstract:
- lang: eng
text: "Novel industrial wireless applications require wideband, real-time channel\r\ncharacterization
due to complex multipath propagation. Rapid machine motion\r\nleads to fast time
variance of the channel's reflective behavior, which must be\r\ncaptured for radio
channel characterization. Additionally, inhomogeneous radio\r\nchannels demand
highly flexible measurements. Existing approaches for radio\r\nchannel measurements
either lack flexibility or wide-band, real-time\r\nperformance with fast time
variance. In this paper, we propose a correlative\r\nchannel sounding approach
utilizing a software-defined architecture. The\r\napproach enables real-time,
wide-band measurements with fast time variance\r\nimmune to active interference.
The desired performance is validated with a\r\ndemanding industrial application
example."
author:
- first_name: Niels Hendrik
full_name: Fliedner, Niels Hendrik
last_name: Fliedner
- first_name: Dimitri
full_name: Block, Dimitri
last_name: Block
- first_name: Uwe
full_name: Meier, Uwe
last_name: Meier
citation:
ama: Fliedner NH, Block D, Meier U. A Software-Defined Channel Sounder for Industrial
Environments with Fast Time Variance. arXiv:180501236. 2018.
apa: Fliedner, N. H., Block, D., & Meier, U. (2018). A Software-Defined Channel
Sounder for Industrial Environments with Fast Time Variance. ArXiv:1805.01236.
bjps: Fliedner NH, Block D and Meier U (2018) A Software-Defined Channel
Sounder for Industrial Environments with Fast Time Variance. arXiv:1805.01236.
chicago: Fliedner, Niels Hendrik, Dimitri Block, and Uwe Meier. “A Software-Defined
Channel Sounder for Industrial Environments with Fast Time Variance.” ArXiv:1805.01236,
2018.
chicago-de: Fliedner, Niels Hendrik, Dimitri Block und Uwe Meier. 2018. A Software-Defined
Channel Sounder for Industrial Environments with Fast Time Variance. arXiv:1805.01236.
din1505-2-1: 'Fliedner, Niels Hendrik
; Block, Dimitri ; Meier,
Uwe: A Software-Defined Channel Sounder for Industrial Environments with
Fast Time Variance. In: arXiv:1805.01236 (2018)'
havard: N.H. Fliedner, D. Block, U. Meier, A Software-Defined Channel Sounder for
Industrial Environments with Fast Time Variance, ArXiv:1805.01236. (2018).
ieee: N. H. Fliedner, D. Block, and U. Meier, “A Software-Defined Channel Sounder
for Industrial Environments with Fast Time Variance,” arXiv:1805.01236.
2018.
mla: Fliedner, Niels Hendrik, et al. “A Software-Defined Channel Sounder for Industrial
Environments with Fast Time Variance.” ArXiv:1805.01236, 2018.
short: N.H. Fliedner, D. Block, U. Meier, ArXiv:1805.01236 (2018).
ufg: 'Fliedner, Niels Hendrik et. al. (2018): A Software-Defined Channel
Sounder for Industrial Environments with Fast Time Variance.'
van: Fliedner NH, Block D, Meier U. A Software-Defined Channel Sounder for Industrial
Environments with Fast Time Variance. arXiv:1805.01236. 2018.
date_created: 2020-05-18T15:07:56Z
date_updated: 2023-03-15T13:49:39Z
ddc:
- '620'
file:
- access_level: open_access
content_type: application/pdf
creator: zph-yh1
date_created: 2020-05-18T15:08:45Z
date_updated: 2020-05-18T15:08:45Z
file_id: '2373'
file_name: 1805.01236v1.pdf
file_size: 574858
relation: main_file
success: 1
file_date_updated: 2020-05-18T15:08:45Z
has_accepted_license: '1'
keyword:
- Correlation
- Wireless communication
- Real-time systems
- Logic gates
- Frequency measurement
- Libraries
- Time measurement
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://arxiv.org/abs/1805.01236
oa: '1'
page: '6'
publication: arXiv:1805.01236
publication_status: published
status: public
title: A Software-Defined Channel Sounder for Industrial Environments with Fast Time
Variance
type: preprint
user_id: '57956'
year: 2018
...
---
_id: '2374'
abstract:
- lang: eng
text: Novel industrial wireless applications require wideband, real-time channel
characterization due to complex multipath propagation. Rapid machine motion leads
to fast time variance of the channel's reflective behavior, which must be captured
for radio channel characterization. Additionally, inhomogeneous radio channels
demand highly flexible measurements. Existing approaches for radio channel measurements
either lack flexibility or wide-band, real-time performance with fast time variance.
In this paper, we propose a correlative channel sounding approach utilizing a
software-defined architecture. The approach enables wide-band measurements with
fast time variance immune to active interference. Furthermore, its real-time capability
allows live processing on demand. The desired performance is validated with a
demanding industrial application example.
author:
- first_name: Niels Hendrik
full_name: Fliedner, Niels Hendrik
last_name: Fliedner
- first_name: Dimitri
full_name: Block, Dimitri
last_name: Block
- first_name: Uwe
full_name: Meier, Uwe
last_name: Meier
citation:
ama: 'Fliedner NH, Block D, Meier U. A Software-Defined Channel Sounder for Industrial
Environments with Fast Time Variance. In: 2018 15th International Symposium
on Wireless Communication Systems (ISWCS). ; 2018. doi:10.1109/iswcs.2018.8491207'
apa: Fliedner, N. H., Block, D., & Meier, U. (2018). A Software-Defined Channel
Sounder for Industrial Environments with Fast Time Variance. In 2018 15th International
Symposium on Wireless Communication Systems (ISWCS). Lisbon, Portugal. https://doi.org/10.1109/iswcs.2018.8491207
bjps: Fliedner NH, Block D and Meier U (2018) A Software-Defined Channel
Sounder for Industrial Environments with Fast Time Variance. 2018 15th International
Symposium on Wireless Communication Systems (ISWCS).
chicago: Fliedner, Niels Hendrik, Dimitri Block, and Uwe Meier. “A Software-Defined
Channel Sounder for Industrial Environments with Fast Time Variance.” In 2018
15th International Symposium on Wireless Communication Systems (ISWCS), 2018.
https://doi.org/10.1109/iswcs.2018.8491207.
chicago-de: 'Fliedner, Niels Hendrik, Dimitri Block und Uwe Meier. 2018. A Software-Defined
Channel Sounder for Industrial Environments with Fast Time Variance. In: 2018
15th International Symposium on Wireless Communication Systems (ISWCS). doi:10.1109/iswcs.2018.8491207,
.'
din1505-2-1: 'Fliedner, Niels Hendrik
; Block, Dimitri ; Meier,
Uwe: A Software-Defined Channel Sounder for Industrial Environments with
Fast Time Variance. In: 2018 15th International Symposium on Wireless Communication
Systems (ISWCS), 2018'
havard: 'N.H. Fliedner, D. Block, U. Meier, A Software-Defined Channel Sounder for
Industrial Environments with Fast Time Variance, in: 2018 15th International Symposium
on Wireless Communication Systems (ISWCS), 2018.'
ieee: N. H. Fliedner, D. Block, and U. Meier, “A Software-Defined Channel Sounder
for Industrial Environments with Fast Time Variance,” in 2018 15th International
Symposium on Wireless Communication Systems (ISWCS), Lisbon, Portugal, 2018.
mla: Fliedner, Niels Hendrik, et al. “A Software-Defined Channel Sounder for Industrial
Environments with Fast Time Variance.” 2018 15th International Symposium on
Wireless Communication Systems (ISWCS), 2018, doi:10.1109/iswcs.2018.8491207.
short: 'N.H. Fliedner, D. Block, U. Meier, in: 2018 15th International Symposium
on Wireless Communication Systems (ISWCS), 2018.'
ufg: 'Fliedner, Niels Hendrik et. al. (2018): A Software-Defined Channel
Sounder for Industrial Environments with Fast Time Variance, in: 2018 15th
International Symposium on Wireless Communication Systems (ISWCS).'
van: 'Fliedner NH, Block D, Meier U. A Software-Defined Channel Sounder for Industrial
Environments with Fast Time Variance. In: 2018 15th International Symposium on
Wireless Communication Systems (ISWCS). 2018.'
conference:
end_date: 2018-08-31
location: Lisbon, Portugal
name: 2018 15th International Symposium on Wireless Communication Systems (ISWCS)
start_date: 2018-08-28
date_created: 2020-05-18T15:14:53Z
date_updated: 2023-03-15T13:49:39Z
department:
- _id: DEP5000
doi: 10.1109/iswcs.2018.8491207
keyword:
- Correlation
- Wireless communication
- Real-time systems
- Logic gates
- Frequency measurement
- Libraries
- Time measurement
language:
- iso: eng
main_file_link:
- url: https://ieeexplore.ieee.org/document/8491207
publication: 2018 15th International Symposium on Wireless Communication Systems (ISWCS)
publication_identifier:
isbn:
- '9781538650059'
publication_status: published
quality_controlled: '1'
status: public
title: A Software-Defined Channel Sounder for Industrial Environments with Fast Time
Variance
type: conference
user_id: '57956'
year: 2018
...
---
_id: '2376'
abstract:
- lang: eng
text: Wireless industrial environments are dominated by multipath propagation and
interference. In order to handle spatial diversity, a possible approach is dividing
the physical area into many small cells. The spatial diversity is turned into
FDMA by utilizing different frequency bands for neighboring cells. A challenging
use case with fast vehicles traveling over long distances in a short time is the
packaging industry. It would require many fast handoffs for each vehicle. Thus,
a small cell FDMA approach is not appropriate. Conversely, employing radiating
lines eliminates FDMA-based handoff issues, and reduces multipath delay spread
and signal attenuation compared to centralized approaches. Additionally, radiating
lines perform well in high-speed, low-power and long-range environments. In this
paper, we realize a novel radiating-line-based, high-reliable, real-time transmission
system with near-field coupling. This wireless transmission method results in
a frequency-flat, time-invariant radio channel for the given requirements. Employing
antenna diversity results in significant improvements in the system's performance
compared to single antenna solutions.
author:
- first_name: Niels Hendrik
full_name: Fliedner, Niels Hendrik
last_name: Fliedner
- first_name: Uwe
full_name: Meier, Uwe
last_name: Meier
- first_name: Thomas
full_name: Neugebauer, Thomas
last_name: Neugebauer
citation:
ama: 'Fliedner NH, Meier U, Neugebauer T. Performance Analysis of a High-Reliable
Real-Time Wireless Transmission System with Near Field Coupling. In: 2018 IEEE
23rd International Conference on Emerging Technologies and Factory Automation
(ETFA). IEEE; 2018. doi:10.1109/etfa.2018.8502494'
apa: 'Fliedner, N. H., Meier, U., & Neugebauer, T. (2018). Performance Analysis
of a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling.
In 2018 IEEE 23rd International Conference on Emerging Technologies and Factory
Automation (ETFA). Turin, Italy: IEEE. https://doi.org/10.1109/etfa.2018.8502494'
bjps: Fliedner NH, Meier U and Neugebauer T (2018) Performance Analysis of
a High-Reliable Real-Time Wireless Transmission System with Near Field Coupling.
2018 IEEE 23rd International Conference on Emerging Technologies and Factory
Automation (ETFA). IEEE.
chicago: Fliedner, Niels Hendrik, Uwe Meier, and Thomas Neugebauer. “Performance
Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field
Coupling.” In 2018 IEEE 23rd International Conference on Emerging Technologies
and Factory Automation (ETFA). IEEE, 2018. https://doi.org/10.1109/etfa.2018.8502494.
chicago-de: 'Fliedner, Niels Hendrik, Uwe Meier und Thomas Neugebauer. 2018. Performance
Analysis of a High-Reliable Real-Time Wireless Transmission System with Near Field
Coupling. In: 2018 IEEE 23rd International Conference on Emerging Technologies
and Factory Automation (ETFA). IEEE. doi:10.1109/etfa.2018.8502494,
.'
din1505-2-1: 'Fliedner, Niels Hendrik
; Meier, Uwe ; Neugebauer,
Thomas: Performance Analysis of a High-Reliable Real-Time Wireless Transmission
System with Near Field Coupling. In: 2018 IEEE 23rd International Conference
on Emerging Technologies and Factory Automation (ETFA) : IEEE, 2018'
havard: 'N.H. Fliedner, U. Meier, T. Neugebauer, Performance Analysis of a High-Reliable
Real-Time Wireless Transmission System with Near Field Coupling, in: 2018 IEEE
23rd International Conference on Emerging Technologies and Factory Automation
(ETFA), IEEE, 2018.'
ieee: N. H. Fliedner, U. Meier, and T. Neugebauer, “Performance Analysis of a High-Reliable
Real-Time Wireless Transmission System with Near Field Coupling,” in 2018 IEEE
23rd International Conference on Emerging Technologies and Factory Automation
(ETFA), Turin, Italy, 2018.
mla: Fliedner, Niels Hendrik, et al. “Performance Analysis of a High-Reliable Real-Time
Wireless Transmission System with Near Field Coupling.” 2018 IEEE 23rd International
Conference on Emerging Technologies and Factory Automation (ETFA), IEEE, 2018,
doi:10.1109/etfa.2018.8502494.
short: 'N.H. Fliedner, U. Meier, T. Neugebauer, in: 2018 IEEE 23rd International
Conference on Emerging Technologies and Factory Automation (ETFA), IEEE, 2018.'
ufg: 'Fliedner, Niels Hendrik et. al. (2018): Performance Analysis of a High-Reliable
Real-Time Wireless Transmission System with Near Field Coupling, in: 2018 IEEE
23rd International Conference on Emerging Technologies and Factory Automation
(ETFA).'
van: 'Fliedner NH, Meier U, Neugebauer T. Performance Analysis of a High-Reliable
Real-Time Wireless Transmission System with Near Field Coupling. In: 2018 IEEE
23rd International Conference on Emerging Technologies and Factory Automation
(ETFA). IEEE; 2018.'
conference:
end_date: 2018-09-07
location: ' Turin, Italy'
name: 2018 IEEE 23rd International Conference on Emerging Technologies and Factory
Automation (ETFA)
start_date: 2018-09-04
date_created: 2020-05-18T15:24:02Z
date_updated: 2023-03-15T13:49:39Z
department:
- _id: DEP5000
doi: 10.1109/etfa.2018.8502494
keyword:
- Spatial diversity
- Antenna measurements
- Real-time systems
- Frequency measurement
- Couplings
- Antennas
language:
- iso: eng
main_file_link:
- url: https://ieeexplore.ieee.org/document/8502494
publication: 2018 IEEE 23rd International Conference on Emerging Technologies and
Factory Automation (ETFA)
publication_identifier:
isbn:
- '9781538671085'
publication_status: published
publisher: IEEE
quality_controlled: '1'
status: public
title: Performance Analysis of a High-Reliable Real-Time Wireless Transmission System
with Near Field Coupling
type: conference
user_id: '57956'
year: 2018
...
---
_id: '552'
abstract:
- lang: eng
text: 'Since additive manufacturing (AM) is continuously growing, the influence
of processing conditions and setup parameters on microstructural and mechanical
properties of additively manufacturedcomponents needs to be clarified. The paper
discusses an experimental approach for the identification of influencing parameters
in Selective Laser Melting; this consists of an evaluation of the mechanical and
physical properties of final parts, depending on the chosen process parameters.
The Design of Experiments is used to get valid results from a limited number of
experiments. The research work focuses on the application of a Definitive Screening
Design to identify the most important influencing parameters: Several parameters
of the hatch and the contour exposure are varied, as well as the position and
orientation of the samples in the build chamber. A maraging steel and a CoCr alloy
are used, and the mechanical and physical properties of the samples are evaluated.
The interdependencies between the variation of the factors and the observed properties
are analyzed.'
author:
- first_name: F.
full_name: Simoni, F.
last_name: Simoni
- first_name: Andrea
full_name: Huxol, Andrea
id: '43559'
last_name: Huxol
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
id: '14290'
last_name: Villmer
citation:
ama: 'Simoni F, Huxol A, Villmer F-J. Analysis of Influencing Parameters on Mechanical
and Physical Properties of SLM Parts. In: Villmer F-J, Padoano E, Department of
Production Engineering and Management, eds. Production Engineering and Management.
Lemgo; 2018:43-55.'
apa: Simoni, F., Huxol, A., & Villmer, F.-J. (2018). Analysis of Influencing
Parameters on Mechanical and Physical Properties of SLM Parts. In F.-J. Villmer,
E. Padoano, & Department of Production Engineering and Management (Eds.),
Production Engineering and Management (pp. 43–55). Lemgo.
bjps: Simoni F, Huxol A and Villmer F-J (2018) Analysis of Influencing Parameters
on Mechanical and Physical Properties of SLM Parts. In Villmer F-J, Padoano E
and Department of Production Engineering and Management (eds), Production Engineering
and Management. Lemgo, pp. 43–55.
chicago: Simoni, F., Andrea Huxol, and Franz-Josef Villmer. “Analysis of Influencing
Parameters on Mechanical and Physical Properties of SLM Parts.” In Production
Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and
Department of Production Engineering and Management, 43–55. Lemgo, 2018.
chicago-de: 'Simoni, F., Andrea Huxol und Franz-Josef Villmer. 2018. Analysis of
Influencing Parameters on Mechanical and Physical Properties of SLM Parts. In:
Production Engineering and Management, hg. von Franz-Josef Villmer, Elio
Padoano, und Department of Production Engineering and Management, 43–55. Lemgo.'
din1505-2-1: 'Simoni, F. ; Huxol,
Andrea ; Villmer, Franz-Josef:
Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM
Parts. In: Villmer, F.-J. ; Padoano, E. ; Department
of Production Engineering and Management (Hrsg.): Production Engineering
and Management. Lemgo, 2018, S. 43–55'
havard: 'F. Simoni, A. Huxol, F.-J. Villmer, Analysis of Influencing Parameters
on Mechanical and Physical Properties of SLM Parts, in: F.-J. Villmer, E. Padoano,
Department of Production Engineering and Management (Eds.), Production Engineering
and Management, Lemgo, 2018: pp. 43–55.'
ieee: F. Simoni, A. Huxol, and F.-J. Villmer, “Analysis of Influencing Parameters
on Mechanical and Physical Properties of SLM Parts,” in Production Engineering
and Management, Lemgo, 2018, no. 1, pp. 43–55.
mla: Simoni, F., et al. “Analysis of Influencing Parameters on Mechanical and Physical
Properties of SLM Parts.” Production Engineering and Management, edited
by Franz-Josef Villmer et al., no. 1, 2018, pp. 43–55.
short: 'F. Simoni, A. Huxol, F.-J. Villmer, in: F.-J. Villmer, E. Padoano, Department
of Production Engineering and Management (Eds.), Production Engineering and Management,
Lemgo, 2018, pp. 43–55.'
ufg: 'Simoni, F. et. al. (2018): Analysis of Influencing Parameters on Mechanical
and Physical Properties of SLM Parts, in: Franz-Josef Villmer et. al. (Hgg.):
Production Engineering and Management, Lemgo, S. 43–55.'
van: 'Simoni F, Huxol A, Villmer F-J. Analysis of Influencing Parameters on Mechanical
and Physical Properties of SLM Parts. In: Villmer F-J, Padoano E, Department of
Production Engineering and Management, editors. Production Engineering and Management.
Lemgo; 2018. p. 43–55.'
conference:
end_date: 2018-10-05
location: Lemgo
name: Proceedings 8th International Conference
start_date: 2018-10-04
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-13T14:11:15Z
date_updated: 2023-03-15T13:50:00Z
department:
- _id: DEP1306
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
issue: '1'
keyword:
- Additive manufacturing
- Process parameters
- Design of Experiments
- Density measurement
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf
oa: '1'
page: 43-55
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-946856-03-0
publication_status: published
status: public
title: Analysis of Influencing Parameters on Mechanical and Physical Properties of
SLM Parts
type: conference
user_id: '45673'
year: 2018
...
---
_id: '2375'
abstract:
- lang: eng
text: Industrial wireless communication in license-free spectrum bands such as the
2.4-GHz-ISM band suffer from motion and multipath effects, which cause a high
time- and frequency-variant channel attenuation. Additionally, mutual interference
from heterogeneous wireless technologies limits real-time capabilities of industrial
wireless technologies. Therefore, performance validations of industrial wireless
technologies within appropriate industrial wireless environments are necessary.
In this paper, we present the first raw measurement data set publication of an
industrial wireless environment characterization in a data repository for free
public access to enable transparent industrial wireless technology validation
and to enhance their comparability. We characterize the whole license-free 2.4-GHz-ISM
band with a time resolution of 110 μs and a frequency resolution of 1MHz in a
coexistence scenario with four antennas obstructed by robot arm movements. Additionally,
the frequency and time variance of the measured channel attenuations are analyzed.
author:
- first_name: Dimitri
full_name: Block, Dimitri
last_name: Block
- first_name: Niels Hendrik
full_name: Fliedner, Niels Hendrik
last_name: Fliedner
- first_name: Daniel
full_name: Toews, Daniel
last_name: Toews
- first_name: Uwe
full_name: Meier, Uwe
last_name: Meier
citation:
ama: 'Block D, Fliedner NH, Toews D, Meier U. Wireless channel measurement data
sets for reproducible performance evaluation in industrial environments. In: 2015
IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA).
; 2015. doi:10.1109/etfa.2015.7301599'
apa: Block, D., Fliedner, N. H., Toews, D., & Meier, U. (2015). Wireless channel
measurement data sets for reproducible performance evaluation in industrial environments.
In 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation
(ETFA). Luxembourg, Luxembourg. https://doi.org/10.1109/etfa.2015.7301599
bjps: Block D et al. (2015) Wireless Channel Measurement Data Sets
for Reproducible Performance Evaluation in Industrial Environments. 2015 IEEE
20th Conference on Emerging Technologies & Factory Automation (ETFA).
chicago: Block, Dimitri, Niels Hendrik Fliedner, Daniel Toews, and Uwe Meier. “Wireless
Channel Measurement Data Sets for Reproducible Performance Evaluation in Industrial
Environments.” In 2015 IEEE 20th Conference on Emerging Technologies &
Factory Automation (ETFA), 2015. https://doi.org/10.1109/etfa.2015.7301599.
chicago-de: 'Block, Dimitri, Niels Hendrik Fliedner, Daniel Toews und Uwe Meier.
2015. Wireless channel measurement data sets for reproducible performance evaluation
in industrial environments. In: 2015 IEEE 20th Conference on Emerging Technologies
& Factory Automation (ETFA). doi:10.1109/etfa.2015.7301599,
.'
din1505-2-1: 'Block, Dimitri ; Fliedner, Niels Hendrik ; Toews,
Daniel ; Meier, Uwe: Wireless
channel measurement data sets for reproducible performance evaluation in industrial
environments. In: 2015 IEEE 20th Conference on Emerging Technologies &
Factory Automation (ETFA), 2015'
havard: 'D. Block, N.H. Fliedner, D. Toews, U. Meier, Wireless channel measurement
data sets for reproducible performance evaluation in industrial environments,
in: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation
(ETFA), 2015.'
ieee: D. Block, N. H. Fliedner, D. Toews, and U. Meier, “Wireless channel measurement
data sets for reproducible performance evaluation in industrial environments,”
in 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation
(ETFA), Luxembourg, Luxembourg, 2015.
mla: Block, Dimitri, et al. “Wireless Channel Measurement Data Sets for Reproducible
Performance Evaluation in Industrial Environments.” 2015 IEEE 20th Conference
on Emerging Technologies & Factory Automation (ETFA), 2015, doi:10.1109/etfa.2015.7301599.
short: 'D. Block, N.H. Fliedner, D. Toews, U. Meier, in: 2015 IEEE 20th Conference
on Emerging Technologies & Factory Automation (ETFA), 2015.'
ufg: 'Block, Dimitri et. al. (2015): Wireless channel measurement data sets
for reproducible performance evaluation in industrial environments, in: 2015
IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA).'
van: 'Block D, Fliedner NH, Toews D, Meier U. Wireless channel measurement data
sets for reproducible performance evaluation in industrial environments. In: 2015
IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA).
2015.'
conference:
end_date: 2015-09-11
location: ' Luxembourg, Luxembourg'
name: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA)
start_date: 2015-09-08
date_created: 2020-05-18T15:20:18Z
date_updated: 2023-03-15T13:49:39Z
department:
- _id: DEP5000
doi: 10.1109/etfa.2015.7301599
keyword:
- Wireless communication
- Wireless sensor networks
- Antenna measurements
- Attenuation measurement
- Extraterrestrial measurements
- Time-frequency analysis
language:
- iso: eng
main_file_link:
- url: https://ieeexplore.ieee.org/document/7301599
publication: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation
(ETFA)
publication_identifier:
isbn:
- '9781467379298'
publication_status: published
quality_controlled: '1'
status: public
title: Wireless channel measurement data sets for reproducible performance evaluation
in industrial environments
type: conference
user_id: '57956'
year: 2015
...
---
_id: '588'
abstract:
- lang: eng
text: "While common measurement techniques like gloss or color measurement are widely
used in industry for quality assessment of furniture high gloss surfaces, they
indicate only a weak correlation to the quality perceived by the customer. Topography
based approaches achieve higher correlation to human perception but are often
based on linear measurement which cannot be applied for an overall assessment
of larger surfaces. Thus an algorithm was developed to calculate a specific value
based on topographic features, such as orange peel, within the research project
‘Development of a comprehensive quality concept for furniture high gloss surfaces’,
funded by the federal Ministry of Education and Research. For the evaluation of
short waved structures on furniture high gloss surfaces the ratio of hill height
to hill area was chosen. This parameter proves to be applicable for an evaluation
of the extent of a single.\r\n"
author:
- first_name: Andrea
full_name: Huxol, Andrea
id: '43559'
last_name: Huxol
- first_name: Adrian
full_name: Riegel, Adrian
id: '14647'
last_name: Riegel
- first_name: Kerstin
full_name: Dekomien, Kerstin
id: '59843'
last_name: Dekomien
citation:
ama: 'Huxol A, Riegel A, Dekomien K. Development of an Algorithm for Measuring the
Quality of High Gloss Surfaces Correlated to Human Perception. In: Padoano E,
Villmer F-J, Department of Production Engineering and Management, eds. Production
Engineering and Management. Lemgo; 2015:99-110.'
apa: Huxol, A., Riegel, A., & Dekomien, K. (2015). Development of an Algorithm
for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception.
In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management
(Eds.), Production Engineering and Management (pp. 99–110). Lemgo.
bjps: Huxol A, Riegel A and Dekomien K (2015) Development of an Algorithm
for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception.
In Padoano E, Villmer F-J and Department of Production Engineering and Management
(eds), Production Engineering and Management. Lemgo, pp. 99–110.
chicago: Huxol, Andrea, Adrian Riegel, and Kerstin Dekomien. “Development of an
Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human
Perception.” In Production Engineering and Management, edited by Elio Padoano,
Franz-Josef Villmer, and Department of Production Engineering and Management,
99–110. Lemgo, 2015.
chicago-de: 'Huxol, Andrea, Adrian Riegel und Kerstin Dekomien. 2015. Development
of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to
Human Perception. In: Production Engineering and Management, hg. von Elio
Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management,
99–110. Lemgo.'
din1505-2-1: 'Huxol, Andrea ; Riegel, Adrian ; Dekomien,
Kerstin: Development of an Algorithm for Measuring the Quality of High
Gloss Surfaces Correlated to Human Perception. In: Padoano,
E. ; Villmer, F.-J. ; Department of Production Engineering and Management
(Hrsg.): Production Engineering and Management. Lemgo, 2015, S. 99–110'
havard: 'A. Huxol, A. Riegel, K. Dekomien, Development of an Algorithm for Measuring
the Quality of High Gloss Surfaces Correlated to Human Perception, in: E. Padoano,
F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production
Engineering and Management, Lemgo, 2015: pp. 99–110.'
ieee: A. Huxol, A. Riegel, and K. Dekomien, “Development of an Algorithm for Measuring
the Quality of High Gloss Surfaces Correlated to Human Perception,” in Production
Engineering and Management, Trieste, Italy, 2015, no. 1, pp. 99–110.
mla: Huxol, Andrea, et al. “Development of an Algorithm for Measuring the Quality
of High Gloss Surfaces Correlated to Human Perception.” Production Engineering
and Management, edited by Elio Padoano et al., no. 1, 2015, pp. 99–110.
short: 'A. Huxol, A. Riegel, K. Dekomien, in: E. Padoano, F.-J. Villmer, Department
of Production Engineering and Management (Eds.), Production Engineering and Management,
Lemgo, 2015, pp. 99–110.'
ufg: 'Huxol, Andrea et. al. (2015): Development of an Algorithm for Measuring
the Quality of High Gloss Surfaces Correlated to Human Perception, in: Elio Padoano
et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 99–110.'
van: 'Huxol A, Riegel A, Dekomien K. Development of an Algorithm for Measuring the
Quality of High Gloss Surfaces Correlated to Human Perception. In: Padoano E,
Villmer F-J, Department of Production Engineering and Management, editors. Production
Engineering and Management. Lemgo; 2015. p. 99–110.'
conference:
end_date: 2015-10-02
location: Trieste, Italy
name: Proceedings5th International Conference
start_date: 2015-10-01
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-18T15:13:34Z
date_updated: 2023-03-15T13:50:02Z
department:
- _id: DEP1306
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
issue: '1'
keyword:
- High gloss
- surface measurement
- topographic features
- quality assessment
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf
oa: '1'
page: 99-110
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-941645-11-0
publication_status: published
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf
status: public
title: Development of an Algorithm for Measuring the Quality of High Gloss Surfaces
Correlated to Human Perception
type: conference
user_id: '45673'
year: 2015
...
---
_id: '6317'
abstract:
- lang: eng
text: The electrical-thermal behavior of an electrical connector is determined by
heat generation due to Joule heating and heat absorption by conduction, convection
and radiation. Heat flow from the connector to the wire is an important heat absorption
mechanism for most electrical connectors. The temperature difference between the
connector and the wire at infinity is proportional to the axial heat flow induced
into the wire. The purpose of this study is to dimension the electrical resistance
of a connector for power distribution by the heat flow into the wire. The heat
flow is used as a design factor in order to define the maximum power loss for
wires with different cross-section areas. With this approach the maximum acceptable
electrical resistance for connectors with different sizes can be estimated in
the early stages of the design process.
author:
- first_name: Michael
full_name: Blauth, Michael
id: '49095'
last_name: Blauth
- first_name: Frank
full_name: Berger, Frank
last_name: Berger
- first_name: Jian
full_name: Song, Jian
id: '5297'
last_name: Song
citation:
ama: 'Blauth M, Berger F, Song J. Influence of the Electrical Resistance and Wire
Size on the Current Carrying Capacity of Connectors. In: IEEE, ed. 60th IEEE
Holm Conference on Electrical Contacts. IEEE; 2014:192-199. doi:10.1109/HOLM.2014.7031043'
apa: Blauth, M., Berger, F., & Song, J. (2014). Influence of the Electrical
Resistance and Wire Size on the Current Carrying Capacity of Connectors. In IEEE
(Ed.), 60th IEEE Holm Conference on Electrical Contacts (pp. 192–199).
IEEE. https://doi.org/10.1109/HOLM.2014.7031043
bjps: 'Blauth M, Berger F and Song J (2014) Influence of the Electrical Resistance
and Wire Size on the Current Carrying Capacity of Connectors. In IEEE (ed.), 60th
IEEE Holm Conference on Electrical Contacts. Piscataway, NJ: IEEE, pp. 192–199.'
chicago: 'Blauth, Michael, Frank Berger, and Jian Song. “Influence of the Electrical
Resistance and Wire Size on the Current Carrying Capacity of Connectors.” In 60th
IEEE Holm Conference on Electrical Contacts, edited by IEEE, 192–99. Piscataway,
NJ: IEEE, 2014. https://doi.org/10.1109/HOLM.2014.7031043.'
chicago-de: 'Blauth, Michael, Frank Berger und Jian Song. 2014. Influence of the
Electrical Resistance and Wire Size on the Current Carrying Capacity of Connectors.
In: 60th IEEE Holm Conference on Electrical Contacts, hg. von IEEE, 192–199.
Piscataway, NJ: IEEE. doi:10.1109/HOLM.2014.7031043,
.'
din1505-2-1: 'Blauth, Michael ; Berger, Frank ; Song,
Jian: Influence of the Electrical Resistance and Wire Size on the Current
Carrying Capacity of Connectors. In: IEEE
(Hrsg.): 60th IEEE Holm Conference on Electrical Contacts. Piscataway,
NJ : IEEE, 2014, S. 192–199'
havard: 'M. Blauth, F. Berger, J. Song, Influence of the Electrical Resistance and
Wire Size on the Current Carrying Capacity of Connectors, in: IEEE (Ed.), 60th
IEEE Holm Conference on Electrical Contacts, IEEE, Piscataway, NJ, 2014: pp. 192–199.'
ieee: 'M. Blauth, F. Berger, and J. Song, “Influence of the Electrical Resistance
and Wire Size on the Current Carrying Capacity of Connectors,” in 60th IEEE
Holm Conference on Electrical Contacts, New Orleans, LA, USA , 2014, pp. 192–199.
doi: 10.1109/HOLM.2014.7031043.'
mla: Blauth, Michael, et al. “Influence of the Electrical Resistance and Wire Size
on the Current Carrying Capacity of Connectors.” 60th IEEE Holm Conference
on Electrical Contacts, edited by IEEE, IEEE, 2014, pp. 192–99, https://doi.org/10.1109/HOLM.2014.7031043.
short: 'M. Blauth, F. Berger, J. Song, in: IEEE (Ed.), 60th IEEE Holm Conference
on Electrical Contacts, IEEE, Piscataway, NJ, 2014, pp. 192–199.'
ufg: 'Blauth, Michael/Berger, Frank/Song, Jian: Influence of the Electrical
Resistance and Wire Size on the Current Carrying Capacity of Connectors, in: IEEE
(Hg.): 60th IEEE Holm Conference on Electrical Contacts, Piscataway, NJ 2014,
S. 192–199.'
van: 'Blauth M, Berger F, Song J. Influence of the Electrical Resistance and Wire
Size on the Current Carrying Capacity of Connectors. In: IEEE, editor. 60th IEEE
Holm Conference on Electrical Contacts. Piscataway, NJ: IEEE; 2014. p. 192–9.'
conference:
end_date: 2014-10-15
location: 'New Orleans, LA, USA '
name: 60th IEEE Holm Conference on Electrical Contacts
start_date: 2014-10-12
corporate_editor:
- IEEE
date_created: 2021-09-16T08:10:59Z
date_updated: 2026-03-04T14:13:15Z
department:
- _id: DEP6012
doi: 10.1109/HOLM.2014.7031043
keyword:
- Wires
- Connectors
- Temperature measurement
- Resistance
- Heat transfer
- Resistance heating
language:
- iso: eng
page: 192 - 199
place: Piscataway, NJ
publication: 60th IEEE Holm Conference on Electrical Contacts
publication_identifier:
eisbn:
- 978-1-4799-6068-2
isbn:
- '978-1-4799-6069-9 '
publication_status: published
publisher: IEEE
status: public
title: Influence of the Electrical Resistance and Wire Size on the Current Carrying
Capacity of Connectors
type: conference
user_id: '83781'
year: '2014'
...
---
_id: '2086'
abstract:
- lang: eng
text: Many of the existing fusion approaches based on Dempster-Shafer Theory (DST)
tend to be unreliable in various scenarios. Therefore, this topic is still in
discussion. In this work a Two-Layer Conflict Solving (TLCS) data fusion scheme
is proposed which is based on Dempster-Shafer Theory and on Fuzzy-Pattern-Classification
(FPC) concepts. The aim is to provide an approach to data fusion which provides
a stable conflict scenario handling. Furthermore, the scheme can easily be extended
to fuzzy classification and is applicable to sensor fusion applications. Therefore,
the suggested approach will contribute as a novel fuzzy fusion method.
author:
- first_name: Volker
full_name: Lohweg, Volker
id: '1804'
last_name: Lohweg
orcid: 0000-0002-3325-7887
- first_name: Uwe
full_name: Mönks, Uwe
id: '1825'
last_name: Mönks
citation:
ama: 'Lohweg V, Mönks U. Sensor Fusion by Two-Layer Conflict Solving. In: The
2nd International Workshop on Cognitive Information Processing. 14-16 June,
2010, Elba Island (Tuscany), Italy; 2010. doi:10.1109/CIP.2010.5604094'
apa: 'Lohweg, V., & Mönks, U. (2010). Sensor Fusion by Two-Layer Conflict Solving.
In The 2nd International Workshop on Cognitive Information Processing.
Elba: 14-16 June, 2010, Elba Island (Tuscany), Italy. https://doi.org/10.1109/CIP.2010.5604094'
bjps: Lohweg V and Mönks U (2010) Sensor Fusion by Two-Layer Conflict Solving.
The 2nd International Workshop on Cognitive Information Processing. 14-16
June, 2010, Elba Island (Tuscany), Italy.
chicago: Lohweg, Volker, and Uwe Mönks. “Sensor Fusion by Two-Layer Conflict Solving.”
In The 2nd International Workshop on Cognitive Information Processing.
14-16 June, 2010, Elba Island (Tuscany), Italy, 2010. https://doi.org/10.1109/CIP.2010.5604094.
chicago-de: 'Lohweg, Volker und Uwe Mönks. 2010. Sensor Fusion by Two-Layer Conflict
Solving. In: The 2nd International Workshop on Cognitive Information Processing.
14-16 June, 2010, Elba Island (Tuscany), Italy. doi:10.1109/CIP.2010.5604094,
.'
din1505-2-1: 'Lohweg, Volker ; Mönks, Uwe: Sensor Fusion by Two-Layer
Conflict Solving. In: The 2nd International Workshop on Cognitive Information
Processing : 14-16 June, 2010, Elba Island (Tuscany), Italy, 2010'
havard: 'V. Lohweg, U. Mönks, Sensor Fusion by Two-Layer Conflict Solving, in: The
2nd International Workshop on Cognitive Information Processing, 14-16 June, 2010,
Elba Island (Tuscany), Italy, 2010.'
ieee: V. Lohweg and U. Mönks, “Sensor Fusion by Two-Layer Conflict Solving,” in
The 2nd International Workshop on Cognitive Information Processing, Elba,
2010.
mla: Lohweg, Volker, and Uwe Mönks. “Sensor Fusion by Two-Layer Conflict Solving.”
The 2nd International Workshop on Cognitive Information Processing, 14-16
June, 2010, Elba Island (Tuscany), Italy, 2010, doi:10.1109/CIP.2010.5604094.
short: 'V. Lohweg, U. Mönks, in: The 2nd International Workshop on Cognitive Information
Processing, 14-16 June, 2010, Elba Island (Tuscany), Italy, 2010.'
ufg: 'Lohweg, Volker/Mönks, Uwe (2010): Sensor Fusion by Two-Layer Conflict
Solving, in: The 2nd International Workshop on Cognitive Information Processing.'
van: 'Lohweg V, Mönks U. Sensor Fusion by Two-Layer Conflict Solving. In: The 2nd
International Workshop on Cognitive Information Processing. 14-16 June, 2010,
Elba Island (Tuscany), Italy; 2010.'
conference:
end_date: 2010-06-16
location: Elba
name: ' 2010 2nd International Workshop on Cognitive Information Processing'
start_date: 2010-06-14
date_created: 2019-12-02T08:04:18Z
date_updated: 2023-03-15T13:49:38Z
department:
- _id: DEP5023
doi: 10.1109/CIP.2010.5604094
keyword:
- Noise measurement
- Fuzzy sets
- Noise
- Sensor fusion
- Logic gates
- Feature extraction
- Fuses
language:
- iso: eng
publication: The 2nd International Workshop on Cognitive Information Processing
publication_identifier:
eisbn:
- 978-1-4244-6459-3
isbn:
- 978-1-4244-6457-9
issn:
- '2327-1671 '
unknown:
- '2327-1698 '
publication_status: published
publisher: 14-16 June, 2010, Elba Island (Tuscany), Italy
status: public
title: Sensor Fusion by Two-Layer Conflict Solving
type: conference
user_id: '45673'
year: 2010
...
---
_id: '10155'
abstract:
- lang: eng
text: This paper describes a method for automatically obtaining the order and position
of contactless connected network participants in a linear physical topology. While
the sequence of network devices can be determined with quite simple methods in
networks with physical interconnections, these methods can not be applied in contactless
networks. This work is based on a linear network topology using a backbone rail,
which includes mechanisms for contactless energy and data transmission. The position
estimation for each attached network device can be performed by determining a
specific physical characteristic, which is altered along the rail extension. The
proposed solution uses a capacitive resonant circuit to achieve a position detection.
author:
- first_name: Derk
full_name: Wesemann, Derk
id: '1273'
last_name: Wesemann
- first_name: Stefan
full_name: Witte, Stefan
id: '1605'
last_name: Witte
- first_name: Jan-Stefan
full_name: Michels, Jan-Stefan
last_name: Michels
citation:
ama: Wesemann D, Witte S, Michels JS. Position Detection in Linear, Proximity
Coupling Networks. (Institute of Electrical and Electronics Engineers, ed.).
IEEE; 2009. doi:10.1109/ELECO.2009.5355273
apa: Wesemann, D., Witte, S., & Michels, J.-S. (2009). Position Detection in
linear, proximity coupling Networks. In Institute of Electrical and Electronics
Engineers (Ed.), 2009 International Conference on Electrical and Electronics
Engineering - ELECO 2009. IEEE. https://doi.org/10.1109/ELECO.2009.5355273
bjps: 'Wesemann D, Witte S and Michels J-S (2009) Position Detection in
Linear, Proximity Coupling Networks, Institute of Electrical and Electronics
Engineers (ed.). Piscataway, NJ: IEEE.'
chicago: 'Wesemann, Derk, Stefan Witte, and Jan-Stefan Michels. Position Detection
in Linear, Proximity Coupling Networks. Edited by Institute of Electrical
and Electronics Engineers. 2009 International Conference on Electrical and
Electronics Engineering - ELECO 2009. Piscataway, NJ: IEEE, 2009. https://doi.org/10.1109/ELECO.2009.5355273.'
chicago-de: 'Wesemann, Derk, Stefan Witte und Jan-Stefan Michels. 2009. Position
Detection in linear, proximity coupling Networks. Hg. von Institute of Electrical
and Electronics Engineers. 2009 International Conference on Electrical and
Electronics Engineering - ELECO 2009. Piscataway, NJ: IEEE. doi:10.1109/ELECO.2009.5355273,
.'
din1505-2-1: 'Wesemann, Derk ; Witte, Stefan ; Michels,
Jan-Stefan ; Institute of Electrical
and Electronics Engineers (Hrsg.): Position Detection in linear, proximity
coupling Networks. Piscataway, NJ : IEEE, 2009'
havard: D. Wesemann, S. Witte, J.-S. Michels, Position Detection in linear, proximity
coupling Networks, IEEE, Piscataway, NJ, 2009.
ieee: 'D. Wesemann, S. Witte, and J.-S. Michels, Position Detection in linear,
proximity coupling Networks. Piscataway, NJ: IEEE, 2009. doi: 10.1109/ELECO.2009.5355273.'
mla: Wesemann, Derk, et al. “Position Detection in Linear, Proximity Coupling Networks.”
2009 International Conference on Electrical and Electronics Engineering - ELECO
2009, edited by Institute of Electrical and Electronics Engineers, IEEE, 2009,
https://doi.org/10.1109/ELECO.2009.5355273.
short: D. Wesemann, S. Witte, J.-S. Michels, Position Detection in Linear, Proximity
Coupling Networks, IEEE, Piscataway, NJ, 2009.
ufg: 'Wesemann, Derk/Witte, Stefan/Michels, Jan-Stefan: Position Detection
in linear, proximity coupling Networks, hg. von Institute of Electrical and Electronics
Engineers, Piscataway, NJ 2009.'
van: 'Wesemann D, Witte S, Michels JS. Position Detection in linear, proximity coupling
Networks. Institute of Electrical and Electronics Engineers, editor. 2009 International
Conference on Electrical and Electronics Engineering - ELECO 2009. Piscataway,
NJ: IEEE; 2009.'
conference:
end_date: 2009-09-08
location: 'Bursa, Turkey '
name: 6th International Conference on Electrical and Electronics Engineering, ELECO
start_date: 2009-09-05
corporate_editor:
- Institute of Electrical and Electronics Engineers
date_created: 2023-07-27T10:06:21Z
date_updated: 2023-08-03T08:05:57Z
department:
- _id: DEP5000
- _id: DEP5023
doi: 10.1109/ELECO.2009.5355273
keyword:
- network topology
- position measurement
- voltage measurement
- wireless sensor networks
language:
- iso: eng
place: Piscataway, NJ
publication: 2009 International Conference on Electrical and Electronics Engineering
- ELECO 2009
publication_identifier:
isbn:
- 978-9944-89-818-8
unknown:
- 978-1424-45-106-7
publication_status: published
publisher: IEEE
status: public
title: Position Detection in linear, proximity coupling Networks
type: conference_editor_article
user_id: '83781'
year: '2009'
...
---
_id: '2340'
article_type: original
author:
- first_name: Björn
full_name: Frahm, Björn
id: '45666'
last_name: Frahm
- first_name: H.-C.
full_name: Blank, H.-C.
last_name: Blank
- first_name: P.
full_name: Cornand, P.
last_name: Cornand
- first_name: W.
full_name: Oelßner, W.
last_name: Oelßner
- first_name: U.
full_name: Guth, U.
last_name: Guth
- first_name: P.
full_name: Lane, P.
last_name: Lane
- first_name: A.
full_name: Munack, A.
last_name: Munack
- first_name: K.
full_name: Johannsen, K.
last_name: Johannsen
- first_name: R.
full_name: Pörtner, R.
last_name: Pörtner
citation:
ama: Frahm B, Blank H-C, Cornand P, et al. Determination of dissolved CO2 concentration
and CO2 production rate of mammalian cell suspension culture based on off-gas
measurement. Journal of Biotechnology. 2002;99(2):133-148. doi:https://doi.org/10.1016/S0168-1656(02)00180-3
apa: Frahm, B., Blank, H.-C., Cornand, P., Oelßner, W., Guth, U., Lane, P., … Pörtner,
R. (2002). Determination of dissolved CO2 concentration and CO2 production rate
of mammalian cell suspension culture based on off-gas measurement. Journal
of Biotechnology, 99(2), 133–148. https://doi.org/10.1016/S0168-1656(02)00180-3
bjps: Frahm B et al. (2002) Determination of Dissolved CO2 Concentration
and CO2 Production Rate of Mammalian Cell Suspension Culture Based on Off-Gas
Measurement. Journal of Biotechnology 99, 133–148.
chicago: 'Frahm, Björn, H.-C. Blank, P. Cornand, W. Oelßner, U. Guth, P. Lane, A.
Munack, K. Johannsen, and R. Pörtner. “Determination of Dissolved CO2 Concentration
and CO2 Production Rate of Mammalian Cell Suspension Culture Based on Off-Gas
Measurement.” Journal of Biotechnology 99, no. 2 (2002): 133–48. https://doi.org/10.1016/S0168-1656(02)00180-3.'
chicago-de: 'Frahm, Björn, H.-C. Blank, P. Cornand, W. Oelßner, U. Guth, P. Lane,
A. Munack, K. Johannsen und R. Pörtner. 2002. Determination of dissolved CO2 concentration
and CO2 production rate of mammalian cell suspension culture based on off-gas
measurement. Journal of Biotechnology 99, Nr. 2: 133–148. doi:https://doi.org/10.1016/S0168-1656(02)00180-3,
.'
din1505-2-1: 'Frahm,
Björn ; Blank, H.-C. ; Cornand, P. ; Oelßner,
W. ; Guth, U. ; Lane,
P. ; Munack, A. ; Johannsen,
K. ; u. a.: Determination of dissolved CO2 concentration and CO2
production rate of mammalian cell suspension culture based on off-gas measurement.
In: Journal of Biotechnology Bd. 99, Elsevier (2002), Nr. 2, S. 133–148'
havard: B. Frahm, H.-C. Blank, P. Cornand, W. Oelßner, U. Guth, P. Lane, A. Munack,
K. Johannsen, R. Pörtner, Determination of dissolved CO2 concentration and CO2
production rate of mammalian cell suspension culture based on off-gas measurement,
Journal of Biotechnology. 99 (2002) 133–148.
ieee: B. Frahm et al., “Determination of dissolved CO2 concentration and
CO2 production rate of mammalian cell suspension culture based on off-gas measurement,”
Journal of Biotechnology, vol. 99, no. 2, pp. 133–148, 2002.
mla: Frahm, Björn, et al. “Determination of Dissolved CO2 Concentration and CO2
Production Rate of Mammalian Cell Suspension Culture Based on Off-Gas Measurement.”
Journal of Biotechnology, vol. 99, no. 2, Elsevier, 2002, pp. 133–48, doi:https://doi.org/10.1016/S0168-1656(02)00180-3.
short: B. Frahm, H.-C. Blank, P. Cornand, W. Oelßner, U. Guth, P. Lane, A. Munack,
K. Johannsen, R. Pörtner, Journal of Biotechnology 99 (2002) 133–148.
ufg: 'Frahm, Björn et. al. (2002): Determination of dissolved CO2 concentration
and CO2 production rate of mammalian cell suspension culture based on off-gas
measurement, in: Journal of Biotechnology 99 (2), S. 133–148.'
van: Frahm B, Blank H-C, Cornand P, Oelßner W, Guth U, Lane P, et al. Determination
of dissolved CO2 concentration and CO2 production rate of mammalian cell suspension
culture based on off-gas measurement. Journal of Biotechnology. 2002;99(2):133–48.
date_created: 2020-05-15T08:49:12Z
date_updated: 2023-03-15T13:49:39Z
department:
- _id: DEP4021
doi: https://doi.org/10.1016/S0168-1656(02)00180-3
extern: '1'
intvolume: ' 99'
issue: '2'
keyword:
- Dissolved carbon dioxide
- Carbon dioxide production rate
- Carbon dioxide transfer rate
- Off-gas measurement
- Mammalian cell suspension culture
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.sciencedirect.com/science/article/pii/S0168165602001803
oa: '1'
page: 133-148
publication: Journal of Biotechnology
publication_identifier:
eissn:
- '1873-4863 '
issn:
- 0168-1656; 1389-0352
publisher: Elsevier
quality_controlled: '1'
status: public
title: Determination of dissolved CO2 concentration and CO2 production rate of mammalian
cell suspension culture based on off-gas measurement
type: scientific_journal_article
user_id: '45666'
volume: 99
year: 2002
...