--- _id: '11376' abstract: - lang: eng text: concentration is an important objective. The phenotype of the cells in a reactor plays an important role. Are clonal cell populations showing high cell-specific growth rates more favorable than cell lines with higher cell-specific productivities or vice versa? Five clonal Chinese hamster ovary cell populations were analyzed based on the data of a 3-month-stability study. We adapted a mechanistic cell culture model to the experimental data of one such clonally derived cell population. Uncertainties and prior knowledge concerning model parameters were considered using Bayesian parameter estimations. This model was used then to define an inoculum train protocol. Based on this, we subsequently simulated the impacts of differences in growth rates (±10%) and production rates (±10% and ±50%) on the overall cultivation time, including making the inoculum train cultures; the final production phase, the volumetric titer in that bioreactor and the ratio of both, defined as overall process productivity. We showed thus unequivocally that growth rates have a higher impact (up to three times) on overall process productivity and for product output per year, whereas cells with higher productivity can potentially generate higher product concentrations in the production vessel. article_number: '964' author: - first_name: Tanja full_name: Hernández Rodriguez, Tanja id: '52466' last_name: Hernández Rodriguez - first_name: Sophie full_name: Morerod, Sophie last_name: Morerod - first_name: Ralf full_name: Pörtner, Ralf last_name: Pörtner - first_name: Florian M. full_name: Wurm, Florian M. last_name: Wurm - first_name: Björn full_name: Frahm, Björn id: '45666' last_name: Frahm citation: ama: Hernández Rodriguez T, Morerod S, Pörtner R, Wurm FM, Frahm B. Considerations of the Impacts of Cell-Specific Growth and Production Rate on Clone Selection—A Simulation Study. Processes. 2021;9(6). doi:10.3390/pr9060964 apa: Hernández Rodriguez, T., Morerod, S., Pörtner, R., Wurm, F. M., & Frahm, B. (2021). Considerations of the Impacts of Cell-Specific Growth and Production Rate on Clone Selection—A Simulation Study. Processes, 9(6), Article 964. https://doi.org/10.3390/pr9060964 bjps: Hernández Rodriguez T et al. (2021) Considerations of the Impacts of Cell-Specific Growth and Production Rate on Clone Selection—A Simulation Study. Processes 9. chicago: Hernández Rodriguez, Tanja, Sophie Morerod, Ralf Pörtner, Florian M. Wurm, and Björn Frahm. “Considerations of the Impacts of Cell-Specific Growth and Production Rate on Clone Selection—A Simulation Study.” Processes 9, no. 6 (2021). https://doi.org/10.3390/pr9060964. chicago-de: Hernández Rodriguez, Tanja, Sophie Morerod, Ralf Pörtner, Florian M. Wurm und Björn Frahm. 2021. Considerations of the Impacts of Cell-Specific Growth and Production Rate on Clone Selection—A Simulation Study. Processes 9, Nr. 6. doi:10.3390/pr9060964, . din1505-2-1: 'Hernández Rodriguez, Tanja ; Morerod, Sophie ; Pörtner, Ralf ; Wurm, Florian M. ; Frahm, Björn: Considerations of the Impacts of Cell-Specific Growth and Production Rate on Clone Selection—A Simulation Study. In: Processes Bd. 9. Basel, MDPI AG (2021), Nr. 6' havard: T. Hernández Rodriguez, S. Morerod, R. Pörtner, F.M. Wurm, B. Frahm, Considerations of the Impacts of Cell-Specific Growth and Production Rate on Clone Selection—A Simulation Study, Processes. 9 (2021). ieee: 'T. Hernández Rodriguez, S. Morerod, R. Pörtner, F. M. Wurm, and B. Frahm, “Considerations of the Impacts of Cell-Specific Growth and Production Rate on Clone Selection—A Simulation Study,” Processes, vol. 9, no. 6, Art. no. 964, 2021, doi: 10.3390/pr9060964.' mla: Hernández Rodriguez, Tanja, et al. “Considerations of the Impacts of Cell-Specific Growth and Production Rate on Clone Selection—A Simulation Study.” Processes, vol. 9, no. 6, 964, 2021, https://doi.org/10.3390/pr9060964. short: T. Hernández Rodriguez, S. Morerod, R. Pörtner, F.M. Wurm, B. Frahm, Processes 9 (2021). ufg: 'Hernández Rodriguez, Tanja u. a.: Considerations of the Impacts of Cell-Specific Growth and Production Rate on Clone Selection—A Simulation Study, in: Processes 9 (2021), H. 6.' van: Hernández Rodriguez T, Morerod S, Pörtner R, Wurm FM, Frahm B. Considerations of the Impacts of Cell-Specific Growth and Production Rate on Clone Selection—A Simulation Study. Processes. 2021;9(6). date_created: 2024-04-25T13:34:26Z date_updated: 2024-05-21T09:29:02Z department: - _id: DEP4000 doi: 10.3390/pr9060964 intvolume: ' 9' issue: '6' keyword: - clonal cell population - phenotypic diversity - inoculum train - uncertainty-based - cell culture model - biopharmaceutical manufacturing language: - iso: eng place: Basel publication: Processes publication_identifier: eissn: - 2227-9717 publication_status: published publisher: MDPI AG status: public title: Considerations of the Impacts of Cell-Specific Growth and Production Rate on Clone Selection—A Simulation Study type: scientific_journal_article user_id: '83781' volume: 9 year: '2021' ... --- _id: '6925' abstract: - lang: eng text: "The compatibility concept is widely used in psychology and ergonomics. It describes the fit between elements of a sociotechnical system which is a prerequisite to successfully cooperate towards a common goal. For at least three decades, cognitive compatibility is of increasing importance. It describes the fit of externally presented information, information processing, and the required motor action. However, with increasing system complexity, probability for incompatibility increases, too, leading to time losses, errors and overall degraded performance. The elimination of cognitive incompatibilities through ergonomic measures at the workplace requires a lot of creativity and effort. Using practical examples from mixed-model assembly, improved information management and the use of informational assistance systems are discussed as promising ergonomic approaches. The ultimate goal is to avoid cognitive overload, for example in part picking or assembly tools choosing. To find a fit between externally mediated work instructions via displays and the subjectively used internal models and competencies is a challenging task. Only if this fit is given the system is perceived as beneficial. To achieve this, the assistance system should be configurable to fit individual needs as far as possible. Successful system design requires early participation and comprehensive integration of the assistance systems into the existing IT infrastructure.\r\n\r\nPractical relevance: Varied manual assembly requires a high degree of cognitive work. A rise in complexity of the assembly task increases the risk that cognitive incompatibility and thus cognitive overload will occur more frequently. It is shown that such unhealthy conditions can be countered by better information presentation and by the use of individually adaptable informational assistance systems." author: - first_name: Dominic full_name: Bläsing, Dominic last_name: Bläsing - first_name: Manfred full_name: Bornewasser, Manfred last_name: Bornewasser - first_name: Sven full_name: Hinrichsen, Sven id: '49010' last_name: Hinrichsen citation: ama: Bläsing D, Bornewasser M, Hinrichsen S. Cognitive compatibility in modern manual mixed-model assembly systems. Zeitschrift für Arbeitswissenschaft. 2021. doi:10.1007/s41449-021-00296-1 apa: Bläsing, D., Bornewasser, M., & Hinrichsen, S. (2021). Cognitive compatibility in modern manual mixed-model assembly systems. Zeitschrift Für Arbeitswissenschaft. https://doi.org/10.1007/s41449-021-00296-1 bjps: Bläsing D, Bornewasser M and Hinrichsen S (2021) Cognitive Compatibility in Modern Manual Mixed-Model Assembly Systems. Zeitschrift für Arbeitswissenschaft. chicago: Bläsing, Dominic, Manfred Bornewasser, and Sven Hinrichsen. “Cognitive Compatibility in Modern Manual Mixed-Model Assembly Systems.” Zeitschrift Für Arbeitswissenschaft, 2021. https://doi.org/10.1007/s41449-021-00296-1. chicago-de: Bläsing, Dominic, Manfred Bornewasser und Sven Hinrichsen. 2021. Cognitive compatibility in modern manual mixed-model assembly systems. Zeitschrift für Arbeitswissenschaft. doi:10.1007/s41449-021-00296-1, . din1505-2-1: 'Bläsing, Dominic ; Bornewasser, Manfred ; Hinrichsen, Sven: Cognitive compatibility in modern manual mixed-model assembly systems. In: Zeitschrift für Arbeitswissenschaft, Springer (2021)' havard: D. Bläsing, M. Bornewasser, S. Hinrichsen, Cognitive compatibility in modern manual mixed-model assembly systems, Zeitschrift Für Arbeitswissenschaft. (2021). ieee: D. Bläsing, M. Bornewasser, and S. Hinrichsen, “Cognitive compatibility in modern manual mixed-model assembly systems,” Zeitschrift für Arbeitswissenschaft, 2021. mla: Bläsing, Dominic, et al. “Cognitive Compatibility in Modern Manual Mixed-Model Assembly Systems.” Zeitschrift Für Arbeitswissenschaft, Springer, 2021, doi:10.1007/s41449-021-00296-1. short: D. Bläsing, M. Bornewasser, S. Hinrichsen, Zeitschrift Für Arbeitswissenschaft (2021). ufg: 'Bläsing, Dominic et. al. (2021): Cognitive compatibility in modern manual mixed-model assembly systems, in: Zeitschrift für Arbeitswissenschaft.' van: Bläsing D, Bornewasser M, Hinrichsen S. Cognitive compatibility in modern manual mixed-model assembly systems. Zeitschrift für Arbeitswissenschaft. 2021; date_created: 2021-12-21T17:13:23Z date_updated: 2023-03-15T13:50:08Z department: - _id: DEP7020 - _id: DEP1305 doi: 10.1007/s41449-021-00296-1 keyword: - Compatibility - Mental model - Mental workload - Multi-model assembly - Informational assistance systems language: - iso: eng publication: Zeitschrift für Arbeitswissenschaft publication_identifier: issn: - 0340-2444 - 2366-4681 publication_status: published publisher: Springer quality_controlled: '1' status: public title: Cognitive compatibility in modern manual mixed-model assembly systems type: journal_article user_id: '49010' year: 2021 ... --- _id: '7983' abstract: - lang: eng text: For the manufacturing of complex biopharmaceuticals using bioreactors with cultivated mammalian cells, high product concentration is an important objective. The phenotype of the cells in a reactor plays an important role. Are clonal cell populations showing high cell-specific growth rates more favorable than cell lines with higher cell-specific productivities or vice versa? Five clonal Chinese hamster ovary cell populations were analyzed based on the data of a 3-month-stability study. We adapted a mechanistic cell culture model to the experimental data of one such clonally derived cell population. Uncertainties and prior knowledge concerning model parameters were considered using Bayesian parameter estimations. This model was used then to define an inoculum train protocol. Based on this, we subsequently simulated the impacts of differences in growth rates (±10%) and production rates (±10% and ±50%) on the overall cultivation time, including making the inoculum train cultures; the final production phase, the volumetric titer in that bioreactor and the ratio of both, defined as overall process productivity. We showed thus unequivocally that growth rates have a higher impact (up to three times) on overall process productivity and for product output per year, whereas cells with higher productivity can potentially generate higher product concentrations in the production vessel. author: - first_name: Tanja full_name: Hernández Rodriguez, Tanja id: '52466' last_name: Hernández Rodriguez - first_name: Sophie full_name: Morerod, Sophie last_name: Morerod - first_name: Ralf full_name: Pörtner, Ralf last_name: Pörtner - first_name: Florian M. full_name: Wurm, Florian M. last_name: Wurm - first_name: Björn full_name: Frahm, Björn id: '45666' last_name: Frahm citation: ama: 'Hernández Rodriguez T, Morerod S, Pörtner R, Wurm FM, Frahm B. Considerations of the impacts of cell-specific growth and production rate on clone selection – a simulation study. In: Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing. Vol special issue. Processes : open access journal . MDPI; 2021:49-74. doi:10.3390/pr9060964' apa: 'Hernández Rodriguez, T., Morerod, S., Pörtner, R., Wurm, F. M., & Frahm, B. (2021). Considerations of the impacts of cell-specific growth and production rate on clone selection – a simulation study. In Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing: Vol. special issue (pp. 49–74). MDPI. https://doi.org/10.3390/pr9060964' bjps: 'Hernández Rodriguez T et al. (2021) Considerations of the Impacts of Cell-Specific Growth and Production Rate on Clone Selection – a Simulation Study. Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing, vol. special issue. Basel: MDPI, pp. 49–74.' chicago: 'Hernández Rodriguez, Tanja, Sophie Morerod, Ralf Pörtner, Florian M. Wurm, and Björn Frahm. “Considerations of the Impacts of Cell-Specific Growth and Production Rate on Clone Selection – a Simulation Study.” In Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing, special issue:49–74. Processes : Open Access Journal . Basel: MDPI, 2021. https://doi.org/10.3390/pr9060964.' chicago-de: 'Hernández Rodriguez, Tanja, Sophie Morerod, Ralf Pörtner, Florian M. Wurm und Björn Frahm. 2021. Considerations of the impacts of cell-specific growth and production rate on clone selection – a simulation study. In: Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing, special issue:49–74. Processes : open access journal . Basel: MDPI. doi:10.3390/pr9060964, .' din1505-2-1: 'Hernández Rodriguez, Tanja ; Morerod, Sophie ; Pörtner, Ralf ; Wurm, Florian M. ; Frahm, Björn: Considerations of the impacts of cell-specific growth and production rate on clone selection – a simulation study. In: Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing, Processes : open access journal . Bd. special issue. Basel : MDPI, 2021, S. 49–74' havard: 'T. Hernández Rodriguez, S. Morerod, R. Pörtner, F.M. Wurm, B. Frahm, Considerations of the impacts of cell-specific growth and production rate on clone selection – a simulation study, in: Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing, MDPI, Basel, 2021: pp. 49–74.' ieee: 'T. Hernández Rodriguez, S. Morerod, R. Pörtner, F. M. Wurm, and B. Frahm, “Considerations of the impacts of cell-specific growth and production rate on clone selection – a simulation study,” in Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing, vol. special issue, Basel: MDPI, 2021, pp. 49–74. doi: 10.3390/pr9060964.' mla: Hernández Rodriguez, Tanja, et al. “Considerations of the Impacts of Cell-Specific Growth and Production Rate on Clone Selection – a Simulation Study.” Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing, vol. special issue, MDPI, 2021, pp. 49–74, https://doi.org/10.3390/pr9060964. short: 'T. Hernández Rodriguez, S. Morerod, R. Pörtner, F.M. Wurm, B. Frahm, in: Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing, MDPI, Basel, 2021, pp. 49–74.' ufg: 'Hernández Rodriguez, Tanja u. a.: Considerations of the impacts of cell-specific growth and production rate on clone selection – a simulation study, in: o. Hg.: Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing, Band special issue, Basel 2021 (Processes : open access journal ),  S. 49–74.' van: 'Hernández Rodriguez T, Morerod S, Pörtner R, Wurm FM, Frahm B. Considerations of the impacts of cell-specific growth and production rate on clone selection – a simulation study. In: Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing. Basel: MDPI; 2021. p. 49–74. (Processes : open access journal ; vol. special issue).' date_created: 2022-05-05T12:55:52Z date_updated: 2023-08-16T09:17:50Z department: - _id: DEP4021 doi: 10.3390/pr9060964 keyword: - clonal cell population - phenotypic diversity - inoculum train - uncertainty-based - cell culture model - biopharmaceutical manufacturing language: - iso: eng page: 49-74 place: Basel publication: Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing publication_identifier: eisbn: - 978-3-0365-5209-5 isbn: - 978-3-0365-5210-1 issn: - '2227-9717 ' publication_status: published publisher: MDPI quality_controlled: '1' series_title: 'Processes : open access journal ' status: public title: Considerations of the impacts of cell-specific growth and production rate on clone selection – a simulation study type: book_chapter user_id: '83781' volume: special issue year: '2021' ... --- _id: '7986' abstract: - lang: eng text: Bioprocess development and optimization are still cost- and time-intensive due to the enormous number of experiments involved. In this study, the recently introduced model-assisted Design of Experiments (mDoE) concept (Möller et al. in Bioproc Biosyst Eng 42(5):867, https://doi.org/10.1007/s00449-019-02089-7, 2019) was extended and implemented into a software (“mDoE-toolbox”) to significantly reduce the number of required cultivations. The application of the toolbox is exemplary shown in two case studies with Saccharomyces cerevisiae. In the first case study, a fed-batch process was optimized with respect to the pH value and linearly rising feeding rates of glucose and nitrogen source. Using the mDoE-toolbox, the biomass concentration was increased by 30% compared to previously performed experiments. The second case study was the whole-cell biocatalysis of ethyl acetoacetate (EAA) to (S)-ethyl-3-hydroxybutyrate (E3HB), for which the feeding rates of glucose, nitrogen source, and EAA were optimized. An increase of 80% compared to a previously performed experiment with similar initial conditions was achieved for the E3HB concentration. author: - first_name: André full_name: Moser, André last_name: Moser - first_name: Kim B. full_name: Kuchemüller, Kim B. last_name: Kuchemüller - first_name: Sahar full_name: Deppe, Sahar last_name: Deppe - first_name: Tanja full_name: Hernández Rodriguez, Tanja id: '52466' last_name: Hernández Rodriguez - first_name: Björn full_name: Frahm, Björn id: '45666' last_name: Frahm - first_name: Ralf full_name: Pörtner, Ralf last_name: Pörtner - first_name: Volker C. full_name: Hass, Volker C. last_name: Hass - first_name: Johannes full_name: Möller, Johannes last_name: Möller citation: ama: 'Moser A, Kuchemüller KB, Deppe S, et al. Model-assisted DoE software: Optimization of growth and biocatalysis in Saccharomyces cerevisiae bioprocesses. Bioprocess and Biosystems Engineering. 2021;44(4):683-700. doi:10.1007/s00449-020-02478-3' apa: 'Moser, A., Kuchemüller, K. B., Deppe, S., Hernández Rodriguez, T., Frahm, B., Pörtner, R., Hass, V. C., & Möller, J. (2021). Model-assisted DoE software: Optimization of growth and biocatalysis in Saccharomyces cerevisiae bioprocesses. Bioprocess and Biosystems Engineering, 44(4), 683–700. https://doi.org/10.1007/s00449-020-02478-3' bjps: 'Moser A et al. (2021) Model-Assisted DoE Software: Optimization of Growth and Biocatalysis in Saccharomyces Cerevisiae Bioprocesses. Bioprocess and Biosystems Engineering 44, 683–700.' chicago: 'Moser, André, Kim B. Kuchemüller, Sahar Deppe, Tanja Hernández Rodriguez, Björn Frahm, Ralf Pörtner, Volker C. Hass, and Johannes Möller. “Model-Assisted DoE Software: Optimization of Growth and Biocatalysis in Saccharomyces Cerevisiae Bioprocesses.” Bioprocess and Biosystems Engineering 44, no. 4 (2021): 683–700. https://doi.org/10.1007/s00449-020-02478-3.' chicago-de: 'Moser, André, Kim B. Kuchemüller, Sahar Deppe, Tanja Hernández Rodriguez, Björn Frahm, Ralf Pörtner, Volker C. Hass und Johannes Möller. 2021. Model-assisted DoE software: Optimization of growth and biocatalysis in Saccharomyces cerevisiae bioprocesses. Bioprocess and Biosystems Engineering 44, Nr. 4: 683–700. doi:10.1007/s00449-020-02478-3, .' din1505-2-1: 'Moser, André ; Kuchemüller, Kim B. ; Deppe, Sahar ; Hernández Rodriguez, Tanja ; Frahm, Björn ; Pörtner, Ralf ; Hass, Volker C. ; Möller, Johannes: Model-assisted DoE software: Optimization of growth and biocatalysis in Saccharomyces cerevisiae bioprocesses. In: Bioprocess and Biosystems Engineering Bd. 44. Berlin ; Heidelberg [u.a.], Springer (2021), Nr. 4, S. 683–700' havard: 'A. Moser, K.B. Kuchemüller, S. Deppe, T. Hernández Rodriguez, B. Frahm, R. Pörtner, V.C. Hass, J. Möller, Model-assisted DoE software: Optimization of growth and biocatalysis in Saccharomyces cerevisiae bioprocesses, Bioprocess and Biosystems Engineering. 44 (2021) 683–700.' ieee: 'A. Moser et al., “Model-assisted DoE software: Optimization of growth and biocatalysis in Saccharomyces cerevisiae bioprocesses,” Bioprocess and Biosystems Engineering, vol. 44, no. 4, pp. 683–700, 2021, doi: 10.1007/s00449-020-02478-3.' mla: 'Moser, André, et al. “Model-Assisted DoE Software: Optimization of Growth and Biocatalysis in Saccharomyces Cerevisiae Bioprocesses.” Bioprocess and Biosystems Engineering, vol. 44, no. 4, 2021, pp. 683–700, https://doi.org/10.1007/s00449-020-02478-3.' short: A. Moser, K.B. Kuchemüller, S. Deppe, T. Hernández Rodriguez, B. Frahm, R. Pörtner, V.C. Hass, J. Möller, Bioprocess and Biosystems Engineering 44 (2021) 683–700. ufg: 'Moser, André u. a.: Model-assisted DoE software: Optimization of growth and biocatalysis in Saccharomyces cerevisiae bioprocesses, in: Bioprocess and Biosystems Engineering 44 (2021), H. 4,  S. 683–700.' van: 'Moser A, Kuchemüller KB, Deppe S, Hernández Rodriguez T, Frahm B, Pörtner R, et al. Model-assisted DoE software: Optimization of growth and biocatalysis in Saccharomyces cerevisiae bioprocesses. Bioprocess and Biosystems Engineering. 2021;44(4):683–700.' date_created: 2022-05-05T13:10:11Z date_updated: 2023-08-21T07:55:05Z department: - _id: DEP4021 doi: 10.1007/s00449-020-02478-3 intvolume: ' 44' issue: '4' keyword: - Biocatalysis - Monte Carlo methods - Fed-batch strategy - Model-assisted design of experiments - Quality by design language: - iso: eng page: 683-700 place: Berlin ; Heidelberg [u.a.] publication: Bioprocess and Biosystems Engineering publication_identifier: eissn: - 1615-7605 isbn: - 1615-7591 publication_status: published publisher: Springer quality_controlled: '1' status: public title: 'Model-assisted DoE software: Optimization of growth and biocatalysis in Saccharomyces cerevisiae bioprocesses' type: scientific_journal_article user_id: '83781' volume: 44 year: '2021' ... --- _id: '4897' abstract: - lang: eng text: Assistance is becoming increasingly relevant in carrying out industrial work in the context of cyber-physical production systems (CPPSs) and Industry 4.0. While assistance in a single task via a single interaction modality has been explored previously, crossdevice interaction could improve the quality of assistance, especially given the concurrent and distributed nature of work in CPPSs. In this paper, we present the theoretical foundations and implementation of MiWSICx (Middleware for Work Support in Industrial Contexts), a middleware that showcases how multiple interactive computing devices such as tablets, smartphones, augmented/virtual reality glasses, and wearables could be combined to provide crossdevice industrial assistance. Based on activity theory, MiWSICx models human work as activities combining multiple users, artifacts, and cyber-physical objects. MiWSICx is developed using the actor model for deployment on a variety of hardware alongside a CPPS to provide multiuser, crossdevice, multiactivity assistance. author: - first_name: Hitesh full_name: Dhiman, Hitesh id: '71767' last_name: Dhiman - first_name: Carsten full_name: Röcker, Carsten id: '61525' last_name: Röcker citation: ama: Dhiman H, Röcker C. Middleware for providing activity-driven assistance in cyber-physical production systems. Journal of Computational Design and Engineering. 2021;8(1):428-451. doi:10.1093/jcde/qwaa088 apa: Dhiman, H., & Röcker, C. (2021). Middleware for providing activity-driven assistance in cyber-physical production systems. Journal of Computational Design and Engineering, 8(1), 428–451. https://doi.org/10.1093/jcde/qwaa088 bjps: Dhiman H and Röcker C (2021) Middleware for Providing Activity-Driven Assistance in Cyber-Physical Production Systems. Journal of Computational Design and Engineering 8, 428–451. chicago: 'Dhiman, Hitesh, and Carsten Röcker. “Middleware for Providing Activity-Driven Assistance in Cyber-Physical Production Systems.” Journal of Computational Design and Engineering 8, no. 1 (2021): 428–51. https://doi.org/10.1093/jcde/qwaa088.' chicago-de: 'Dhiman, Hitesh und Carsten Röcker. 2021. Middleware for providing activity-driven assistance in cyber-physical production systems. Journal of Computational Design and Engineering 8, Nr. 1: 428–451. doi:10.1093/jcde/qwaa088, .' din1505-2-1: 'Dhiman, Hitesh ; Röcker, Carsten: Middleware for providing activity-driven assistance in cyber-physical production systems. In: Journal of Computational Design and Engineering Bd. 8. Oxford, Oxford University Press (2021), Nr. 1, S. 428–451' havard: H. Dhiman, C. Röcker, Middleware for providing activity-driven assistance in cyber-physical production systems, Journal of Computational Design and Engineering. 8 (2021) 428–451. ieee: H. Dhiman and C. Röcker, “Middleware for providing activity-driven assistance in cyber-physical production systems,” Journal of Computational Design and Engineering, vol. 8, no. 1, pp. 428–451, 2021. mla: Dhiman, Hitesh, and Carsten Röcker. “Middleware for Providing Activity-Driven Assistance in Cyber-Physical Production Systems.” Journal of Computational Design and Engineering, vol. 8, no. 1, Oxford University Press, 2021, pp. 428–51, doi:10.1093/jcde/qwaa088. short: H. Dhiman, C. Röcker, Journal of Computational Design and Engineering 8 (2021) 428–451. ufg: 'Dhiman, Hitesh/Röcker, Carsten (2021): Middleware for providing activity-driven assistance in cyber-physical production systems, in: Journal of Computational Design and Engineering 8 (1), S. 428–451.' van: Dhiman H, Röcker C. Middleware for providing activity-driven assistance in cyber-physical production systems. Journal of Computational Design and Engineering. 2021;8(1):428–51. date_created: 2021-02-04T15:20:11Z date_updated: 2023-03-15T13:49:56Z department: - _id: DEP5023 - _id: DEP5027 doi: 10.1093/jcde/qwaa088 intvolume: ' 8' issue: '1' keyword: - human–technology interaction - human–computer interaction - crossdevice interaction - cyber-physical systems - assistance - smart factory - middleware - actor model - information system design - industry 4.0 language: - iso: eng page: 428-451 place: Oxford publication: Journal of Computational Design and Engineering publication_identifier: eissn: - '2288-4300 ' publication_status: published publisher: Oxford University Press status: public title: Middleware for providing activity-driven assistance in cyber-physical production systems type: journal_article user_id: '15514' volume: 8 year: 2021 ... --- _id: '12225' abstract: - lang: eng text: 'Lake Sevan is the largest freshwater body in the Caucasus region, situated at an altitude of 1,900 m asl. While it is a major water resource in the whole region, Lake Sevan has received little attention in international limnological literature. Although recent studies pointed to algal blooms and negative impacts of climate change and eutrophication, the physical controls on thermal dynamics have not been characterized and model-based assessments of climate change impacts are lacking. We compiled a decade of historical data for meteorological conditions and temperature dynamics in Lake Sevan and used a one-dimensional hydrodynamic model (GLM 3.1) in order to study thermal structure, the stratification phenology and their meteorological drivers in this large mountain lake. We then evaluated the representativeness of meteorological data products covering almost 4 decades (EWEMBI-dataset: 1979-2016) for driving the model and found that these data are well suited to restore long term thermal dynamics in Lake Sevan. This established model setting allowed us to identify major changes in Lake Sevan’s stratification in response to changing meteorological conditions as expected from ongoing climate change. Our results point to a changing mixing type from dimictic to monomictic as Lake Sevan will experience prolonged summer stratification periods and more stable stratification. These projected changes in stratification must be included in long-term management perspectives as they will intensify water quality deteriorations like surface algal blooms or deep water anoxia.' author: - first_name: Muhammed full_name: Shikhani, Muhammed id: '87725' last_name: Shikhani - first_name: Chenxi full_name: Mi, Chenxi last_name: Mi - first_name: Artur full_name: Gevorgyan, Artur last_name: Gevorgyan - first_name: Gor full_name: Gevorgyan, Gor last_name: Gevorgyan - first_name: Amalya full_name: Misakyan, Amalya last_name: Misakyan - first_name: Levon full_name: Azizyan, Levon last_name: Azizyan - first_name: Klemens full_name: Barfus, Klemens last_name: Barfus - first_name: Martin full_name: Schulze, Martin last_name: Schulze - first_name: Tom full_name: Shatwell, Tom id: '86424' last_name: Shatwell orcid: 0000-0002-4520-7916 - first_name: Karsten full_name: Rinke, Karsten last_name: Rinke citation: ama: 'Shikhani M, Mi C, Gevorgyan A, et al. Simulating thermal dynamics of the largest lake in the Caucasus region: The mountain Lake Sevan. Journal of Limnology. 2021;81(s1). doi:10.4081/jlimnol.2021.2024' apa: 'Shikhani, M., Mi, C., Gevorgyan, A., Gevorgyan, G., Misakyan, A., Azizyan, L., Barfus, K., Schulze, M., Shatwell, T., & Rinke, K. (2021). Simulating thermal dynamics of the largest lake in the Caucasus region: The mountain Lake Sevan. Journal of Limnology, 81(s1). https://doi.org/10.4081/jlimnol.2021.2024' bjps: 'Shikhani M et al. (2021) Simulating Thermal Dynamics of the Largest Lake in the Caucasus Region: The Mountain Lake Sevan. Journal of Limnology 81.' chicago: 'Shikhani, Muhammed, Chenxi Mi, Artur Gevorgyan, Gor Gevorgyan, Amalya Misakyan, Levon Azizyan, Klemens Barfus, Martin Schulze, Tom Shatwell, and Karsten Rinke. “Simulating Thermal Dynamics of the Largest Lake in the Caucasus Region: The Mountain Lake Sevan.” Journal of Limnology 81, no. s1 (2021). https://doi.org/10.4081/jlimnol.2021.2024.' chicago-de: 'Shikhani, Muhammed, Chenxi Mi, Artur Gevorgyan, Gor Gevorgyan, Amalya Misakyan, Levon Azizyan, Klemens Barfus, Martin Schulze, Tom Shatwell und Karsten Rinke. 2021. Simulating thermal dynamics of the largest lake in the Caucasus region: The mountain Lake Sevan. Journal of Limnology 81, Nr. s1. doi:10.4081/jlimnol.2021.2024, .' din1505-2-1: 'Shikhani, Muhammed ; Mi, Chenxi ; Gevorgyan, Artur ; Gevorgyan, Gor ; Misakyan, Amalya ; Azizyan, Levon ; Barfus, Klemens ; Schulze, Martin ; u. a.: Simulating thermal dynamics of the largest lake in the Caucasus region: The mountain Lake Sevan. In: Journal of Limnology Bd. 81. Verbania , Istituto per lo Studio degli Ecosistemi (Verbania) (2021), Nr. s1' havard: 'M. Shikhani, C. Mi, A. Gevorgyan, G. Gevorgyan, A. Misakyan, L. Azizyan, K. Barfus, M. Schulze, T. Shatwell, K. Rinke, Simulating thermal dynamics of the largest lake in the Caucasus region: The mountain Lake Sevan, Journal of Limnology. 81 (2021).' ieee: 'M. Shikhani et al., “Simulating thermal dynamics of the largest lake in the Caucasus region: The mountain Lake Sevan,” Journal of Limnology, vol. 81, no. s1, 2021, doi: 10.4081/jlimnol.2021.2024.' mla: 'Shikhani, Muhammed, et al. “Simulating Thermal Dynamics of the Largest Lake in the Caucasus Region: The Mountain Lake Sevan.” Journal of Limnology, vol. 81, no. s1, 2021, https://doi.org/10.4081/jlimnol.2021.2024.' short: M. Shikhani, C. Mi, A. Gevorgyan, G. Gevorgyan, A. Misakyan, L. Azizyan, K. Barfus, M. Schulze, T. Shatwell, K. Rinke, Journal of Limnology 81 (2021). ufg: 'Shikhani, Muhammed u. a.: Simulating thermal dynamics of the largest lake in the Caucasus region: The mountain Lake Sevan, in: Journal of Limnology 81 (2021), H. s1.' van: 'Shikhani M, Mi C, Gevorgyan A, Gevorgyan G, Misakyan A, Azizyan L, et al. Simulating thermal dynamics of the largest lake in the Caucasus region: The mountain Lake Sevan. Journal of Limnology. 2021;81(s1).' date_created: 2024-12-08T19:55:10Z date_updated: 2024-12-11T13:04:19Z department: - _id: DEP8022 doi: 10.4081/jlimnol.2021.2024 extern: '1' intvolume: ' 81' issue: s1 keyword: - General Lake Model (GLM) - Lake Sevan - temperature stratification - EWEMBI - climate warming language: - iso: eng place: 'Verbania ' publication: Journal of Limnology publication_identifier: eissn: - 1723-8633 issn: - 1129-5767 publication_status: published publisher: 'Istituto per lo Studio degli Ecosistemi (Verbania) ' quality_controlled: '1' status: public title: 'Simulating thermal dynamics of the largest lake in the Caucasus region: The mountain Lake Sevan' type: scientific_journal_article user_id: '83781' volume: 81 year: '2021' ... --- _id: '12230' abstract: - lang: eng text: Model ensembles have several benefits compared to single-model applications but are not frequently used within the lake modelling community. Setting up and running multiple lake models can be challenging and time consuming, despite the many similarities between the existing models (forcing data, hypsograph, etc.). Here we present an R package, LakeEnsemblR, that facilitates running ensembles of five different vertical one-dimensional hydrodynamic lake models (FLake, GLM, GOTM, Simstrat, MyLake). The package requires input in a standardised format and a single configuration file. LakeEnsemblR formats these files to the input required by each model, and provides functions to run and calibrate the models. The outputs of the different models are compiled into a single file, and several post-processing operations are supported. LakeEnsemblR's workflow standardisation can simplify model benchmarking and uncertainty quantification, and improve collaborations between scientists. We showcase the successful application of LakeEnsemblR for two different lakes. article_number: '105101' author: - first_name: Tadhg N. full_name: Moore, Tadhg N. last_name: Moore - first_name: Jorrit P. full_name: Mesman, Jorrit P. last_name: Mesman - first_name: Robert full_name: Ladwig, Robert last_name: Ladwig - first_name: Johannes full_name: Feldbauer, Johannes last_name: Feldbauer - first_name: Freya full_name: Olsson, Freya last_name: Olsson - first_name: Rachel M. full_name: Pilla, Rachel M. last_name: Pilla - first_name: Tom full_name: Shatwell, Tom id: '86424' last_name: Shatwell orcid: 0000-0002-4520-7916 - first_name: Jason J. full_name: Venkiteswaran, Jason J. last_name: Venkiteswaran - first_name: Austin D. full_name: Delany, Austin D. last_name: Delany - first_name: Hilary full_name: Dugan, Hilary last_name: Dugan - first_name: Kevin C. full_name: Rose, Kevin C. last_name: Rose - first_name: Jordan S. full_name: Read, Jordan S. last_name: Read citation: ama: 'Moore TN, Mesman JP, Ladwig R, et al. LakeEnsemblR: An R package that facilitates ensemble modelling of lakes. Environmental modelling & software with environment data news. 2021;143. doi:10.1016/j.envsoft.2021.105101' apa: 'Moore, T. N., Mesman, J. P., Ladwig, R., Feldbauer, J., Olsson, F., Pilla, R. M., Shatwell, T., Venkiteswaran, J. J., Delany, A. D., Dugan, H., Rose, K. C., & Read, J. S. (2021). LakeEnsemblR: An R package that facilitates ensemble modelling of lakes. Environmental Modelling & Software with Environment Data News, 143, Article 105101. https://doi.org/10.1016/j.envsoft.2021.105101' bjps: 'Moore TN et al. (2021) LakeEnsemblR: An R Package That Facilitates Ensemble Modelling of Lakes. Environmental modelling & software with environment data news 143.' chicago: 'Moore, Tadhg N., Jorrit P. Mesman, Robert Ladwig, Johannes Feldbauer, Freya Olsson, Rachel M. Pilla, Tom Shatwell, et al. “LakeEnsemblR: An R Package That Facilitates Ensemble Modelling of Lakes.” Environmental Modelling & Software with Environment Data News 143 (2021). https://doi.org/10.1016/j.envsoft.2021.105101.' chicago-de: 'Moore, Tadhg N., Jorrit P. Mesman, Robert Ladwig, Johannes Feldbauer, Freya Olsson, Rachel M. Pilla, Tom Shatwell, u. a. 2021. LakeEnsemblR: An R package that facilitates ensemble modelling of lakes. Environmental modelling & software with environment data news 143. doi:10.1016/j.envsoft.2021.105101, .' din1505-2-1: 'Moore, Tadhg N. ; Mesman, Jorrit P. ; Ladwig, Robert ; Feldbauer, Johannes ; Olsson, Freya ; Pilla, Rachel M. ; Shatwell, Tom ; Venkiteswaran, Jason J. ; u. a.: LakeEnsemblR: An R package that facilitates ensemble modelling of lakes. In: Environmental modelling & software with environment data news Bd. 143, Elsevier BV (2021)' havard: 'T.N. Moore, J.P. Mesman, R. Ladwig, J. Feldbauer, F. Olsson, R.M. Pilla, T. Shatwell, J.J. Venkiteswaran, A.D. Delany, H. Dugan, K.C. Rose, J.S. Read, LakeEnsemblR: An R package that facilitates ensemble modelling of lakes, Environmental Modelling & Software with Environment Data News. 143 (2021).' ieee: 'T. N. Moore et al., “LakeEnsemblR: An R package that facilitates ensemble modelling of lakes,” Environmental modelling & software with environment data news, vol. 143, Art. no. 105101, 2021, doi: 10.1016/j.envsoft.2021.105101.' mla: 'Moore, Tadhg N., et al. “LakeEnsemblR: An R Package That Facilitates Ensemble Modelling of Lakes.” Environmental Modelling & Software with Environment Data News, vol. 143, 105101, 2021, https://doi.org/10.1016/j.envsoft.2021.105101.' short: T.N. Moore, J.P. Mesman, R. Ladwig, J. Feldbauer, F. Olsson, R.M. Pilla, T. Shatwell, J.J. Venkiteswaran, A.D. Delany, H. Dugan, K.C. Rose, J.S. Read, Environmental Modelling & Software with Environment Data News 143 (2021). ufg: 'Moore, Tadhg N. u. a.: LakeEnsemblR: An R package that facilitates ensemble modelling of lakes, in: Environmental modelling & software with environment data news 143 (2021).' van: 'Moore TN, Mesman JP, Ladwig R, Feldbauer J, Olsson F, Pilla RM, et al. LakeEnsemblR: An R package that facilitates ensemble modelling of lakes. Environmental modelling & software with environment data news. 2021;143.' date_created: 2024-12-08T20:18:32Z date_updated: 2024-12-09T11:27:54Z department: - _id: DEP8022 doi: 10.1016/j.envsoft.2021.105101 extern: '1' intvolume: ' 143' keyword: - Ensemble modeling - Vertical one-dimensional lake model - R package - Calibration - Thermal structure - Hydrodynamics language: - iso: eng main_file_link: - url: https://doi.org/10.1016/j.envsoft.2021.105101 publication: Environmental modelling & software with environment data news publication_identifier: eissn: - 1873-6726 issn: - 1364-8152 publication_status: published publisher: Elsevier BV quality_controlled: '1' status: public title: 'LakeEnsemblR: An R package that facilitates ensemble modelling of lakes' type: scientific_journal_article user_id: '83781' volume: 143 year: '2021' ... --- _id: '8384' abstract: - lang: eng text: "ynamic simulation models are widely utilized to evaluate complex technical components and systems like electric drives or machines. They can support the development process of a production machine by avoiding an inadequate layout of components or an erroneous control design. However, the effort for building them is often too high for this purpose (lot size one). An automated model generation can be utilized to overcome the gap between efforts and advantages of dynamic simulations.\r\n\r\nThis contribution presents an approach for simplifying the dynamic model generation of production machines by using the so-called Asset Administration Shell defined by the initiative Platform Industrie 4.0. The Asset Administration Shell was developed to aggregate all data necessary for maintaining the product across its life cycle. This includes component data and models as well as structural information about a machine. The generation process is performed by using the common FMI standard and a two-step procedure which allows the linkage of different simulation tools. The model generation is demonstrated by an example layout of a machine's internal direct current grid." author: - first_name: D. full_name: Göllner, D. last_name: Göllner - first_name: Thomas full_name: Pawlik, Thomas id: '58915' last_name: Pawlik - first_name: Thomas full_name: Schulte, Thomas id: '46242' last_name: Schulte citation: ama: Göllner D, Pawlik T, Schulte T. Utilization of the Asset Administration Shell for the Generation of Dynamic Simulation Models. (IEEE Singapore Section, IEEE TEMS Singapore Chapter,, IEEE TEMS Hong Kong Chapter, eds.). IEEE; 2021:808-812. doi:10.1109/IEEM50564.2021.9673089 apa: Göllner, D., Pawlik, T., & Schulte, T. (2021). Utilization of the Asset Administration Shell for the Generation of Dynamic Simulation Models. In IEEE Singapore Section, IEEE TEMS Singapore Chapter, & IEEE TEMS Hong Kong Chapter (Eds.), 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) (pp. 808–812). IEEE. https://doi.org/10.1109/IEEM50564.2021.9673089 bjps: 'Göllner D, Pawlik T and Schulte T (2021) Utilization of the Asset Administration Shell for the Generation of Dynamic Simulation Models, IEEE Singapore Section, IEEE TEMS Singapore Chapter, and IEEE TEMS Hong Kong Chapter (eds). [Piscataway, NJ]: IEEE.' chicago: 'Göllner, D., Thomas Pawlik, and Thomas Schulte. Utilization of the Asset Administration Shell for the Generation of Dynamic Simulation Models. Edited by IEEE Singapore Section, IEEE TEMS Singapore Chapter, and IEEE TEMS Hong Kong Chapter. 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE International Conference on Industrial Engineering and Engineering Management . [Piscataway, NJ]: IEEE, 2021. https://doi.org/10.1109/IEEM50564.2021.9673089.' chicago-de: 'Göllner, D., Thomas Pawlik und Thomas Schulte. 2021. Utilization of the Asset Administration Shell for the Generation of Dynamic Simulation Models. Hg. von IEEE Singapore Section, IEEE TEMS Singapore Chapter, und IEEE TEMS Hong Kong Chapter. 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE International Conference on Industrial Engineering and Engineering Management . [Piscataway, NJ]: IEEE. doi:10.1109/IEEM50564.2021.9673089, .' din1505-2-1: 'Göllner, D. ; Pawlik, Thomas ; Schulte, Thomas ; IEEE Singapore Section ; IEEE TEMS Singapore Chapter, ; IEEE TEMS Hong Kong Chapter (Hrsg.): Utilization of the Asset Administration Shell for the Generation of Dynamic Simulation Models, IEEE International Conference on Industrial Engineering and Engineering Management . [Piscataway, NJ] : IEEE, 2021' havard: D. Göllner, T. Pawlik, T. Schulte, Utilization of the Asset Administration Shell for the Generation of Dynamic Simulation Models, IEEE, [Piscataway, NJ], 2021. ieee: 'D. Göllner, T. Pawlik, and T. Schulte, Utilization of the Asset Administration Shell for the Generation of Dynamic Simulation Models. [Piscataway, NJ]: IEEE, 2021, pp. 808–812. doi: 10.1109/IEEM50564.2021.9673089.' mla: Göllner, D., et al. “Utilization of the Asset Administration Shell for the Generation of Dynamic Simulation Models.” 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), edited by IEEE Singapore Section et al., IEEE, 2021, pp. 808–12, https://doi.org/10.1109/IEEM50564.2021.9673089. short: D. Göllner, T. Pawlik, T. Schulte, Utilization of the Asset Administration Shell for the Generation of Dynamic Simulation Models, IEEE, [Piscataway, NJ], 2021. ufg: 'Göllner, D./Pawlik, Thomas/Schulte, Thomas: Utilization of the Asset Administration Shell for the Generation of Dynamic Simulation Models, hg. von IEEE Singapore Section/IEEE TEMS Singapore Chapter,, IEEE TEMS Hong Kong Chapter, [Piscataway, NJ] 2021 (IEEE International Conference on Industrial Engineering and Engineering Management ).' van: 'Göllner D, Pawlik T, Schulte T. Utilization of the Asset Administration Shell for the Generation of Dynamic Simulation Models. IEEE Singapore Section, IEEE TEMS Singapore Chapter,, IEEE TEMS Hong Kong Chapter, editors. 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). [Piscataway, NJ]: IEEE; 2021. (IEEE International Conference on Industrial Engineering and Engineering Management ).' conference: end_date: 2021-12-16 location: Online (Singapore) name: 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) start_date: 2021-12-13 corporate_editor: - IEEE Singapore Section - IEEE TEMS Singapore Chapter, - IEEE TEMS Hong Kong Chapter date_created: 2022-06-22T14:14:28Z date_updated: 2025-06-26T13:38:36Z department: - _id: DEP6020 - _id: DEP5022 doi: 10.1109/IEEM50564.2021.9673089 keyword: - Digital Twin - Asset Administration Shell - Dynamic Simulation Model - Industry 4.0 - Automated Model Generation language: - iso: eng page: 808-812 place: '[Piscataway, NJ]' publication: 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) publication_identifier: eisbn: - 978-1-6654-3771-4 isbn: - '978-1-6654-3772-1 ' issn: - 2157-3611 publication_status: published publisher: IEEE series_title: 'IEEE International Conference on Industrial Engineering and Engineering Management ' status: public title: Utilization of the Asset Administration Shell for the Generation of Dynamic Simulation Models type: conference_editor_article user_id: '83781' year: '2021' ... --- _id: '2184' abstract: - lang: eng text: "Material flows and energy flows can be correlated with sufficient data, e.g. on production energies, annual production quantities and degrees of dissipation with temperature increases in the atmosphere, volumes of molten ice or sea level increases, as well as with probability statements, information densities and management recommendations. All these quantities can be described by the comprehensive term entropy.\r\nIn order to consider the efficiency of material and energy flows, the difficulty to understand the concept of entropy with its different definitions can be summarized simply and easily in a model related to ice cubes.\r\nThe quality of a model containing percentage probability statements, statements on dissipation in material flow models in connection with statements on information density and its description by the ice cube model is still to be determined in practice in suitable material flow models. Such projects should show the types of mathematical correlations between dissipation degrees, entropy increase, increase of molten ice and sea level rise.\r\n" author: - first_name: Manfred full_name: Sietz, Manfred id: '21016' last_name: Sietz - first_name: Burkhard full_name: Wrenger, Burkhard id: '21024' last_name: Wrenger citation: ama: Sietz M, Wrenger B. Entropie eines Eiswürfels, Wahrscheinlichkeitsaussagen und Meeresspiegelerhöhung.; 2020. doi:10.25644/76E5-PC61 apa: Sietz, M., & Wrenger, B. (2020). Entropie eines Eiswürfels, Wahrscheinlichkeitsaussagen und Meeresspiegelerhöhung. https://doi.org/10.25644/76E5-PC61 bjps: Sietz M and Wrenger B (2020) Entropie eines Eiswürfels, Wahrscheinlichkeitsaussagen und Meeresspiegelerhöhung. . chicago: Sietz, Manfred, and Burkhard Wrenger. Entropie eines Eiswürfels, Wahrscheinlichkeitsaussagen und Meeresspiegelerhöhung, 2020. https://doi.org/10.25644/76E5-PC61. chicago-de: Sietz, Manfred und Burkhard Wrenger. 2020. Entropie eines Eiswürfels, Wahrscheinlichkeitsaussagen und Meeresspiegelerhöhung. doi:10.25644/76E5-PC61, . din1505-2-1: 'Sietz, Manfred ; Wrenger, Burkhard: Entropie eines Eiswürfels, Wahrscheinlichkeitsaussagen und Meeresspiegelerhöhung, 2020' havard: M. Sietz, B. Wrenger, Entropie eines Eiswürfels, Wahrscheinlichkeitsaussagen und Meeresspiegelerhöhung, 2020. ieee: M. Sietz and B. Wrenger, Entropie eines Eiswürfels, Wahrscheinlichkeitsaussagen und Meeresspiegelerhöhung. 2020. mla: Sietz, Manfred, and Burkhard Wrenger. Entropie eines Eiswürfels, Wahrscheinlichkeitsaussagen und Meeresspiegelerhöhung. 2020, doi:10.25644/76E5-PC61. short: M. Sietz, B. Wrenger, Entropie eines Eiswürfels, Wahrscheinlichkeitsaussagen und Meeresspiegelerhöhung, 2020. ufg: 'Sietz, Manfred/Wrenger, Burkhard (2020): Entropie eines Eiswürfels, Wahrscheinlichkeitsaussagen und Meeresspiegelerhöhung.' van: Sietz M, Wrenger B. Entropie eines Eiswürfels, Wahrscheinlichkeitsaussagen und Meeresspiegelerhöhung. 2020. date_created: 2020-01-15T10:13:24Z date_updated: 2023-03-15T13:49:39Z ddc: - '540' department: - _id: DEP8012 - _id: DEP8025 doi: 10.25644/76E5-PC61 file: - access_level: open_access content_type: application/pdf creator: hka-zn8 date_created: 2020-01-15T10:13:20Z date_updated: 2020-01-15T10:13:20Z file_id: '2185' file_name: Eiswürfel und Wahrscheinlichkeitsaussagen.pdf file_size: 153981 relation: main_file file_date_updated: 2020-01-15T10:13:20Z has_accepted_license: '1' keyword: - Entropy - Ice Cube - Sustainability - Sea Level Rise - Information Density - Probability Statements - Material Flow Model - Dissipation language: - iso: ger oa: '1' status: public title: Entropie eines Eiswürfels, Wahrscheinlichkeitsaussagen und Meeresspiegelerhöhung type: working_paper user_id: '68554' year: 2020 ... --- _id: '5424' abstract: - lang: eng text: Near infrared spectroscopy in combination with a transflection probe was investigated as inline measurement in a continuous flash pasteurizer system with a sugar-water model solution. Robustness and reproducibility of fluctuations of recorded spectra as well as trueness of the chemometric analysis were compared under different process parameter settings. Variable parameters were the flow rate (from laminar flow at 30 L/h to turbulent flow at 90 L/h), temperature (20 to 100 degrees C) and the path length of the transflection probe (2 and 4 mm) while the pressure was kept constant at 2.5 bar. Temperature and path length were identified as the most affecting parameters, in case of homogenous test medium. In case of particle containing systems, the flow rate could have an impact as well. However, the application of a PLS model, which includes a broad temperature range, and the correction of prediction results by applying a polynomial regression function for prediction errors, was able to compensate these effects. Also, a path length of 2 mm leads to a higher accuracy. The applied strategy shows that by the identification of relevant process parameters and settings as well as the establishment of a compensation strategy, near infrared spectroscopy is a powerful process analytical tool for continuous flash pasteurization systems. author: - first_name: Imke full_name: Weishaupt, Imke id: '58425' last_name: Weishaupt - first_name: Manuel full_name: Zimmer, Manuel id: '71613' last_name: Zimmer orcid: 0000-0002-9974-2543 - first_name: Peter full_name: Neubauer, Peter last_name: Neubauer - first_name: Jan full_name: Schneider, Jan id: '13209' last_name: Schneider orcid: 0000-0001-6401-8873 citation: ama: Weishaupt I, Zimmer M, Neubauer P, Schneider J. Model based optimization of transflection near infrared spectroscopy as a process analytical tool in a continuous flash pasteurizer. Journal of Food Science. 2020;85(7):2020-2031. doi:10.1111/1750-3841.15307 apa: Weishaupt, I., Zimmer, M., Neubauer, P., & Schneider, J. (2020). Model based optimization of transflection near infrared spectroscopy as a process analytical tool in a continuous flash pasteurizer. Journal of Food Science, 85(7), 2020–2031. https://doi.org/10.1111/1750-3841.15307 bjps: Weishaupt I et al. (2020) Model Based Optimization of Transflection near Infrared Spectroscopy as a Process Analytical Tool in a Continuous Flash Pasteurizer. Journal of Food Science 85, 2020–2031. chicago: 'Weishaupt, Imke, Manuel Zimmer, Peter Neubauer, and Jan Schneider. “Model Based Optimization of Transflection near Infrared Spectroscopy as a Process Analytical Tool in a Continuous Flash Pasteurizer.” Journal of Food Science 85, no. 7 (2020): 2020–31. https://doi.org/10.1111/1750-3841.15307.' chicago-de: 'Weishaupt, Imke, Manuel Zimmer, Peter Neubauer und Jan Schneider. 2020. Model based optimization of transflection near infrared spectroscopy as a process analytical tool in a continuous flash pasteurizer. Journal of Food Science 85, Nr. 7: 2020–2031. doi:10.1111/1750-3841.15307, .' din1505-2-1: 'Weishaupt, Imke ; Zimmer, Manuel ; Neubauer, Peter ; Schneider, Jan: Model based optimization of transflection near infrared spectroscopy as a process analytical tool in a continuous flash pasteurizer. In: Journal of Food Science Bd. 85 (2020), Nr. 7, S. 2020–2031' havard: I. Weishaupt, M. Zimmer, P. Neubauer, J. Schneider, Model based optimization of transflection near infrared spectroscopy as a process analytical tool in a continuous flash pasteurizer, Journal of Food Science. 85 (2020) 2020–2031. ieee: 'I. Weishaupt, M. Zimmer, P. Neubauer, and J. Schneider, “Model based optimization of transflection near infrared spectroscopy as a process analytical tool in a continuous flash pasteurizer,” Journal of Food Science, vol. 85, no. 7, pp. 2020–2031, 2020, doi: 10.1111/1750-3841.15307.' mla: Weishaupt, Imke, et al. “Model Based Optimization of Transflection near Infrared Spectroscopy as a Process Analytical Tool in a Continuous Flash Pasteurizer.” Journal of Food Science, vol. 85, no. 7, 2020, pp. 2020–31, https://doi.org/10.1111/1750-3841.15307. short: I. Weishaupt, M. Zimmer, P. Neubauer, J. Schneider, Journal of Food Science 85 (2020) 2020–2031. ufg: 'Weishaupt, Imke u. a.: Model based optimization of transflection near infrared spectroscopy as a process analytical tool in a continuous flash pasteurizer, in: Journal of Food Science 85 (2020), H. 7,  S. 2020–2031.' van: Weishaupt I, Zimmer M, Neubauer P, Schneider J. Model based optimization of transflection near infrared spectroscopy as a process analytical tool in a continuous flash pasteurizer. Journal of Food Science. 2020;85(7):2020–31. date_created: 2021-04-08T06:37:30Z date_updated: 2025-06-26T13:30:26Z department: - _id: DEP1308 - _id: DEP4018 doi: 10.1111/1750-3841.15307 external_id: isi: - '000543977000001' pmid: - '32602154' intvolume: ' 85' isi: '1' issue: '7' keyword: - flash pasteurization - inline near infrared spectroscopy - multivariate data analysis - process condition influences - sugar-water-solution model beverage language: - iso: eng page: 2020 - 2031 pmid: '1' publication: Journal of Food Science publication_identifier: eissn: - 1750-3841 isbn: - 0022-1147 publication_status: published status: public title: Model based optimization of transflection near infrared spectroscopy as a process analytical tool in a continuous flash pasteurizer type: journal_article user_id: '83781' volume: 85 year: '2020' ... --- _id: '1911' abstract: - lang: eng text: Reading about small and medium-sized manufacturing companies in newspapers and magazines, one might get the impression that integrating and exploiting new digital technologies is one of the most urgent challenges for managers today. Although many different industry 4.0 and Internet of Things (IoT) tests have been published, a framework to structure the content and the process of digital transformation is missing. Therefore, comprehensive research of available literature has been implemented; the results show that the framework from Appelfeller and Feldmann is the most suitable for application in companies. Due to the fact that the authors present no acquired experience in the application of the framework in practice, an evaluation study was set up in companies. The results of a case study are presented and an overview is given how to implement this specific check in a company. author: - first_name: Sven full_name: Tackenberg, Sven id: '71470' last_name: Tackenberg - first_name: Wilfried full_name: Jungkind, Wilfried id: '14059' last_name: Jungkind - first_name: C. full_name: Feldmann, C. last_name: Feldmann - first_name: W. full_name: Appelfeller, W. last_name: Appelfeller citation: ama: 'Tackenberg S, Jungkind W, Feldmann C, Appelfeller W. Digital Transformation of Companies: Experience gained in the Implementation of an IOT Check. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2019:281-290.' apa: 'Tackenberg, S., Jungkind, W., Feldmann, C., & Appelfeller, W. (2019). Digital Transformation of Companies: Experience gained in the Implementation of an IOT Check. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 281–290). Lemgo.' bjps: 'Tackenberg S et al. (2019) Digital Transformation of Companies: Experience Gained in the Implementation of an IOT Check. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 281–290.' chicago: 'Tackenberg, Sven, Wilfried Jungkind, C. Feldmann, and W. Appelfeller. “Digital Transformation of Companies: Experience Gained in the Implementation of an IOT Check.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 281–90. Lemgo, 2019.' chicago-de: 'Tackenberg, Sven, Wilfried Jungkind, C. Feldmann und W. Appelfeller. 2019. Digital Transformation of Companies: Experience gained in the Implementation of an IOT Check. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 281–290. Lemgo.' din1505-2-1: 'Tackenberg, Sven ; Jungkind, Wilfried ; Feldmann, C. ; Appelfeller, W.: Digital Transformation of Companies: Experience gained in the Implementation of an IOT Check. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2019, S. 281–290' havard: 'S. Tackenberg, W. Jungkind, C. Feldmann, W. Appelfeller, Digital Transformation of Companies: Experience gained in the Implementation of an IOT Check, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2019: pp. 281–290.' ieee: 'S. Tackenberg, W. Jungkind, C. Feldmann, and W. Appelfeller, “Digital Transformation of Companies: Experience gained in the Implementation of an IOT Check,” in Production Engineering and Management, Trieste, Italy, 2019, pp. 281–290.' mla: 'Tackenberg, Sven, et al. “Digital Transformation of Companies: Experience Gained in the Implementation of an IOT Check.” Production Engineering and Management, edited by Elio Padoano et al., 2019, pp. 281–90.' short: 'S. Tackenberg, W. Jungkind, C. Feldmann, W. Appelfeller, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2019, pp. 281–290.' ufg: 'Tackenberg, Sven et. al. (2019): Digital Transformation of Companies: Experience gained in the Implementation of an IOT Check, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 281–290.' van: 'Tackenberg S, Jungkind W, Feldmann C, Appelfeller W. Digital Transformation of Companies: Experience gained in the Implementation of an IOT Check. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2019. p. 281–90.' conference: end_date: 2019-10-04 location: Trieste, Italy name: Proceedings 9th International Conference start_date: 2019-10-03 corporate_editor: - Department of Production Engineering and Management - Technische Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T11:34:36Z date_updated: 2023-03-15T13:49:37Z department: - _id: DEP1306 - _id: DEP7020 - _id: DEP1305 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer keyword: - Digital transformation - Maturity model - Check language: - iso: eng page: 281-290 place: Lemgo publication: Production Engineering and Management publication_status: published status: public title: 'Digital Transformation of Companies: Experience gained in the Implementation of an IOT Check' type: conference user_id: '74004' year: 2019 ... --- _id: '6003' abstract: - lang: ger text: In industriellen Szenarien wächst seit Längerem der Bedarf an drahtloser und zuverlässiger Kommunikation. Es gibt hierzu einige aus der IT-Welt adaptierte Standards, welche in vielen Anwendungen im industriellen Umfeld nicht ausreichen. Daher wurde bei der Spezifikation des neuen 5G-Standards explizit die Nutzung im industriellen Umfeld mit berücksichtigt. Diese Arbeit beschäftigt sich mit den Vorteilen der Multi-Connectivity (MC), welche sich durch die Architektur des neuen 5G-NR Standards in der Automatisierungstechnik ergeben können. Hierzu wurden im ersten Schritt Funkkanalmessungen in einer industrienahen Umgebung – der SmartFactoryOWL – durchgeführt, und im weiteren Verlauf die MC in einen Kommunikationsstack integriert und die Zuverlässigkeit (Reliability) (REL) bei verschiedenen MCKonfigurationen ermittelt. Im praktischen Aufbau konnte eine erhöhte REL der drahtlosen Kommunikation im industriellen Kontext unter Einsatz der MC nachgewiesen werden. author: - first_name: Niels Hendrik full_name: Fliedner, Niels Hendrik id: '57956' last_name: Fliedner orcid: 0000-0003-0484-1328 - first_name: Roland full_name: Heß, Roland last_name: Heß - first_name: Stefan full_name: Witte, Stefan id: '1605' last_name: Witte citation: ama: 'Fliedner NH, Heß R, Witte S. Multi-Connectivity in 5G Industrial Environments. In: Jumar U, Jasperneite J, Institut für Automation und Kommunikation e.V., eds. KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium “Kommunikation in der Automation.” Otto-von-Guericke-Universität Magdeburg. R-PÖ; 2019.' apa: 'Fliedner, N. H., Heß, R., & Witte, S. (2019). Multi-Connectivity in 5G Industrial Environments. In U. Jumar, J. Jasperneite, & Institut für Automation und Kommunikation e.V. (Eds.), KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium “Kommunikation in der Automation.” Otto-von-Guericke-Universität Magdeburg. R-PÖ.' bjps: 'Fliedner NH, Heß R and Witte S (2019) Multi-Connectivity in 5G Industrial Environments. In Jumar U, Jasperneite J, and Institut für Automation und Kommunikation e.V. (eds), KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium ‘Kommunikation in der Automation’. Magdeburg: Otto-von-Guericke-Universität Magdeburg. R-PÖ.' chicago: 'Fliedner, Niels Hendrik, Roland Heß, and Stefan Witte. “Multi-Connectivity in 5G Industrial Environments.” In KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium “Kommunikation in der Automation,” edited by Ulrich Jumar, Jürgen Jasperneite, and Institut für Automation und Kommunikation e.V. Magdeburg: Otto-von-Guericke-Universität Magdeburg. R-PÖ, 2019.' chicago-de: 'Fliedner, Niels Hendrik, Roland Heß und Stefan Witte. 2019. Multi-Connectivity in 5G Industrial Environments. In: KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium „Kommunikation in der Automation“, hg. von Ulrich Jumar, Jürgen Jasperneite, und Institut für Automation und Kommunikation e.V. Magdeburg: Otto-von-Guericke-Universität Magdeburg. R-PÖ.' din1505-2-1: 'Fliedner, Niels Hendrik ; Heß, Roland ; Witte, Stefan: Multi-Connectivity in 5G Industrial Environments. In: Jumar, U. ; Jasperneite, J. ; Institut für Automation und Kommunikation e.V. (Hrsg.): KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium „Kommunikation in der Automation“. Magdeburg : Otto-von-Guericke-Universität Magdeburg. R-PÖ, 2019' havard: 'N.H. Fliedner, R. Heß, S. Witte, Multi-Connectivity in 5G Industrial Environments, in: U. Jumar, J. Jasperneite, Institut für Automation und Kommunikation e.V. (Eds.), KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium “Kommunikation in der Automation,” Otto-von-Guericke-Universität Magdeburg. R-PÖ, Magdeburg, 2019.' ieee: 'N. H. Fliedner, R. Heß, and S. Witte, “Multi-Connectivity in 5G Industrial Environments,” in KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium “Kommunikation in der Automation,” Magdeburg, 2019.' mla: 'Fliedner, Niels Hendrik, et al. “Multi-Connectivity in 5G Industrial Environments.” KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium “Kommunikation in der Automation,” edited by Ulrich Jumar et al., Otto-von-Guericke-Universität Magdeburg. R-PÖ, 2019.' short: 'N.H. Fliedner, R. Heß, S. Witte, in: U. Jumar, J. Jasperneite, Institut für Automation und Kommunikation e.V. (Eds.), KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium “Kommunikation in der Automation,” Otto-von-Guericke-Universität Magdeburg. R-PÖ, Magdeburg, 2019.' ufg: 'Fliedner, Niels Hendrik/Heß, Roland/Witte, Stefan: Multi-Connectivity in 5G Industrial Environments, in: Jumar, Ulrich/Jasperneite, Jürgen, Institut für Automation und Kommunikation e.V. (Hgg.): KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium „Kommunikation in der Automation“, Magdeburg 2019.' van: 'Fliedner NH, Heß R, Witte S. Multi-Connectivity in 5G Industrial Environments. In: Jumar U, Jasperneite J, Institut für Automation und Kommunikation e.V., editors. KommA 2019 : Kommunikation in der Automation : 20-21112019 : 10 Jahreskolloquium “Kommunikation in der Automation.” Magdeburg: Otto-von-Guericke-Universität Magdeburg. R-PÖ; 2019.' conference: end_date: 2019-11-21 location: Magdeburg name: 2019 Kommunikation in der Automation (KommA) start_date: 2019-11-20 corporate_editor: - Institut für Automation und Kommunikation e.V. date_created: 2021-06-22T09:34:20Z date_updated: 2023-08-14T13:16:56Z ddc: - '000' department: - _id: DEP5023 - _id: DEP5010 editor: - first_name: Ulrich full_name: Jumar, Ulrich last_name: Jumar - first_name: Jürgen full_name: Jasperneite, Jürgen last_name: Jasperneite extern: '1' keyword: - 5G - Multi-Connectivity - Zuverlässigkeit language: - iso: ger main_file_link: - url: https://tydirium.init.th-owl.de/s/ErCo2mjFdJQDoXN?dir=undefined&path=%2FKommA%202019%2FPaper%2FSession1_Funk&openfile=7286659 place: Magdeburg publication: 'KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium "Kommunikation in der Automation"' publication_identifier: isbn: - 978-3-944722-85-6 publication_status: published publisher: Otto-von-Guericke-Universität Magdeburg. R-PÖ quality_controlled: '1' status: public title: Multi-Connectivity in 5G Industrial Environments type: conference user_id: '83781' year: '2019' ... --- _id: '12803' abstract: - lang: eng text: The increasing amount of alarms and information for an operator in a modern plant becomes a significant safety risk. Although the notifications are a valuable support, they also lead to the curse of overloading with information for the operator. Due to the huge amount of alarms it is almost impossible to separate the crucial information from the insignificant ones. Therefore, new procedures are required to reduce these alarm floods and support the operator to minimize the safety risk. One approach is based on learning a causal model that represents the relationships between the alarms. This allows alarm sequences that are causally implied to be reduced to the root cause alarm. Fundamental element of this approach is the causal model. Therefore in this work, different probabilistic graphical models are considered and evaluated on the basis of appropriate criteria. A real use case of a bottle filling module serves as a benchmark for how well they are suitable as a causal model for the application in alarm flood reduction. author: - first_name: Paul full_name: Wunderlich, Paul id: '52317' last_name: Wunderlich - first_name: Nemanja full_name: Hranisavljevic, Nemanja id: '62376' last_name: Hranisavljevic citation: ama: Wunderlich P, Hranisavljevic N. Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction. (Aalto University, Finland, Tampere University, Finland, Finnish Society of Automation, Finland, eds.). IEEE; 2019:1285-1290. doi:10.1109/indin41052.2019.8972251 apa: Wunderlich, P., & Hranisavljevic, N. (2019). Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction. In Aalto University, Finland, Tampere University, Finland, & Finnish Society of Automation, Finland (Eds.), 2019 IEEE 17th International Conference on Industrial Informatics (INDIN) (pp. 1285–1290). IEEE. https://doi.org/10.1109/indin41052.2019.8972251 bjps: 'Wunderlich P and Hranisavljevic N (2019) Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction, Aalto University, Finland, Tampere University, Finland, and Finnish Society of Automation, Finland (eds). [Piscataway, NJ]: IEEE.' chicago: 'Wunderlich, Paul, and Nemanja Hranisavljevic. Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction. Edited by Aalto University, Finland, Tampere University, Finland, and Finnish Society of Automation, Finland. 2019 IEEE 17th International Conference on Industrial Informatics (INDIN). [Piscataway, NJ]: IEEE, 2019. https://doi.org/10.1109/indin41052.2019.8972251.' chicago-de: 'Wunderlich, Paul und Nemanja Hranisavljevic. 2019. Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction. Hg. von Aalto University, Finland, Tampere University, Finland, und Finnish Society of Automation, Finland. 2019 IEEE 17th International Conference on Industrial Informatics (INDIN). [Piscataway, NJ]: IEEE. doi:10.1109/indin41052.2019.8972251, .' din1505-2-1: 'Wunderlich, Paul ; Hranisavljevic, Nemanja ; Aalto University, Finland ; Tampere University, Finland ; Finnish Society of Automation, Finland (Hrsg.): Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction. [Piscataway, NJ] : IEEE, 2019' havard: P. Wunderlich, N. Hranisavljevic, Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction, IEEE, [Piscataway, NJ], 2019. ieee: 'P. Wunderlich and N. Hranisavljevic, Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction. [Piscataway, NJ]: IEEE, 2019, pp. 1285–1290. doi: 10.1109/indin41052.2019.8972251.' mla: Wunderlich, Paul, and Nemanja Hranisavljevic. “Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction.” 2019 IEEE 17th International Conference on Industrial Informatics (INDIN), edited by Aalto University, Finland et al., IEEE, 2019, pp. 1285–90, https://doi.org/10.1109/indin41052.2019.8972251. short: P. Wunderlich, N. Hranisavljevic, Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction, IEEE, [Piscataway, NJ], 2019. ufg: 'Wunderlich, Paul/Hranisavljevic, Nemanja: Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction, hg. von Aalto University, Finland/Tampere University, Finland, Finnish Society of Automation, Finland, [Piscataway, NJ] 2019.' van: 'Wunderlich P, Hranisavljevic N. Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction. Aalto University, Finland, Tampere University, Finland, Finnish Society of Automation, Finland, editors. 2019 IEEE 17th International Conference on Industrial Informatics (INDIN). [Piscataway, NJ]: IEEE; 2019.' conference: end_date: 2019-07-25 location: 'Helsinki, Finland ' name: 17th IEEE International Conference on Industrial Informatics (INDIN) start_date: 2019-07-22 corporate_editor: - Aalto University, Finland - Tampere University, Finland - Finnish Society of Automation, Finland date_created: 2025-04-16T06:29:04Z date_updated: 2025-06-26T13:38:06Z department: - _id: DEP5023 doi: 10.1109/indin41052.2019.8972251 keyword: - probabilistic graphical model - causal model - alarm flood reduction - Bayesian network - Markov chain - restricted boltzmann machine - automata language: - iso: eng page: 1285-1290 place: '[Piscataway, NJ]' publication: 2019 IEEE 17th International Conference on Industrial Informatics (INDIN) publication_identifier: eisbn: - 978-1-7281-2927-3 isbn: - 978-1-7281-2928-0 publication_status: published publisher: IEEE status: public title: Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction type: conference_editor_article user_id: '83781' year: '2019' ... --- _id: '11746' abstract: - lang: eng text: "Objectives: Integrating Electronic Health Record (EHR) systems into the field of clinical trials still contains several challenges and obstacles. Heterogeneous standards and specifications are used to represent healthcare and clinical trial information. Therefore, this work investigates the mapping and data interoperability between healthcare and research standards: EN13606 used for the EHRs and the Clinical Data Interchange Standards Consortium Operational Data Model (CDISC ODM) used for clinical research.\r\n\r\nMethods: Based on the specifications of CDISC ODM 1.3.2 and EN13606, a mapping between the structure and components of both standards has been performed. Archetype Definition Language (ADL) forms built with the EN13606 editor were transformed to ODM XML and reviewed. As a proof of concept, clinical sample data has been transformed into ODM and imported into an electronic data capture system. Reverse transformation from ODM to ADL has also been performed and finally reviewed concerning map-ability.\r\n\r\nResults: The mapping between EN13606 and CDISC ODM shows the similarities and differences between the components and overall record structure of the two standards. An EN13606 archetype corresponds with a group of items within CDISC ODM. Transformations of element names, descriptions, different languages, datatypes, cardinality, optionality, units, value range and terminology codes are possible from EN13606 to CDISC ODM and vice versa.\r\n\r\nConclusion: It is feasible to map data elements between EN13606 and CDISC ODM and transformation of forms between ADL and ODM XML format is possible with only minor limitations. EN13606 can accommodate clinical information in a more structured manner with more constraints, whereas CDISC ODM is more suitable and specific for clinical trials and studies. It is feasible to transform EHR data in the EN13606 form to ODM to transfer it into research database. The attempt to use EN13606 to build a study protocol (that was already built with CDISC ODM) also suggests the possibility of using EN13606 standard in place of CDISC ODM if needed to avoid transformations." article_number: '205520761877767' author: - first_name: Archana full_name: Tapuria, Archana last_name: Tapuria - first_name: Philipp full_name: Bruland, Philipp id: '75847' last_name: Bruland orcid: 0000-0001-6939-7630 - first_name: Brendan full_name: Delaney, Brendan last_name: Delaney - first_name: Dipak full_name: Kalra, Dipak last_name: Kalra - first_name: Vasa full_name: Curcin, Vasa last_name: Curcin citation: ama: Tapuria A, Bruland P, Delaney B, Kalra D, Curcin V. Comparison and transformation between CDISC ODM and EN13606 EHR standards in connecting EHR data with clinical trial research data. Digital health. 2018;4. doi:10.1177/2055207618777676 apa: Tapuria, A., Bruland, P., Delaney, B., Kalra, D., & Curcin, V. (2018). Comparison and transformation between CDISC ODM and EN13606 EHR standards in connecting EHR data with clinical trial research data. Digital Health, 4, Article 205520761877767. https://doi.org/10.1177/2055207618777676 bjps: Tapuria A et al. (2018) Comparison and Transformation between CDISC ODM and EN13606 EHR Standards in Connecting EHR Data with Clinical Trial Research Data. Digital health 4. chicago: Tapuria, Archana, Philipp Bruland, Brendan Delaney, Dipak Kalra, and Vasa Curcin. “Comparison and Transformation between CDISC ODM and EN13606 EHR Standards in Connecting EHR Data with Clinical Trial Research Data.” Digital Health 4 (2018). https://doi.org/10.1177/2055207618777676. chicago-de: Tapuria, Archana, Philipp Bruland, Brendan Delaney, Dipak Kalra und Vasa Curcin. 2018. Comparison and transformation between CDISC ODM and EN13606 EHR standards in connecting EHR data with clinical trial research data. Digital health 4. doi:10.1177/2055207618777676, . din1505-2-1: 'Tapuria, Archana ; Bruland, Philipp ; Delaney, Brendan ; Kalra, Dipak ; Curcin, Vasa: Comparison and transformation between CDISC ODM and EN13606 EHR standards in connecting EHR data with clinical trial research data. In: Digital health Bd. 4. Thousand Oaks, Calif. [u.a.] , SAGE Publications (2018)' havard: A. Tapuria, P. Bruland, B. Delaney, D. Kalra, V. Curcin, Comparison and transformation between CDISC ODM and EN13606 EHR standards in connecting EHR data with clinical trial research data, Digital Health. 4 (2018). ieee: 'A. Tapuria, P. Bruland, B. Delaney, D. Kalra, and V. Curcin, “Comparison and transformation between CDISC ODM and EN13606 EHR standards in connecting EHR data with clinical trial research data,” Digital health, vol. 4, Art. no. 205520761877767, 2018, doi: 10.1177/2055207618777676.' mla: Tapuria, Archana, et al. “Comparison and Transformation between CDISC ODM and EN13606 EHR Standards in Connecting EHR Data with Clinical Trial Research Data.” Digital Health, vol. 4, 205520761877767, 2018, https://doi.org/10.1177/2055207618777676. short: A. Tapuria, P. Bruland, B. Delaney, D. Kalra, V. Curcin, Digital Health 4 (2018). ufg: 'Tapuria, Archana u. a.: Comparison and transformation between CDISC ODM and EN13606 EHR standards in connecting EHR data with clinical trial research data, in: Digital health 4 (2018).' van: Tapuria A, Bruland P, Delaney B, Kalra D, Curcin V. Comparison and transformation between CDISC ODM and EN13606 EHR standards in connecting EHR data with clinical trial research data. Digital health. 2018;4. date_created: 2024-07-18T13:34:20Z date_updated: 2024-07-18T13:36:34Z department: - _id: DEP5024 doi: 10.1177/2055207618777676 extern: '1' external_id: pmid: - '29942639' intvolume: ' 4' keyword: - EN13606 - Operational data model - clinical archetypes - electronic health records - interoperability. language: - iso: eng place: 'Thousand Oaks, Calif. [u.a.] ' pmid: '1' publication: Digital health publication_identifier: eissn: - 2055-2076 publication_status: published publisher: SAGE Publications status: public title: Comparison and transformation between CDISC ODM and EN13606 EHR standards in connecting EHR data with clinical trial research data type: scientific_journal_article user_id: '83781' volume: 4 year: '2018' ... --- _id: '2005' abstract: - lang: eng text: We present a method for the fast and robust linear classification of badly conditioned data. In our considerations, badly conditioned data are such data which are numerically difficult to handle. Due to, e.g. a large number of features or a large number of objects representing classes as well as noise, outliers or incompleteness, the common software computation of the discriminating linear combination of features between classes fails or is extremely time consuming. The theoretical foundations of our approach are based on the single feature ranking, which allows fast calculation of the approximative initial classification boundary. For the increasing of classification accuracy of this boundary, the refinement is performed in the lower dimensional space. Our approach is tested on several datasets from UCI Reposi-tiory. Experimental results indicate high classification accuracy of the approach. For the modern real industrial applications such a method is especially suitable in the Cyber-Physical-System environments and provides a part of the workflow for the automated classifier design author: - first_name: Helene full_name: Dörksen, Helene id: '46416' last_name: Dörksen - first_name: Volker full_name: Lohweg, Volker id: '1804' last_name: Lohweg orcid: 0000-0002-3325-7887 citation: ama: 'Dörksen H, Lohweg V. Linear Classification of Badly Conditioned Data. . In: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy; 2018. doi:10.1109/ETFA.2018.8502485' apa: Dörksen, H., & Lohweg, V. (2018). Linear Classification of Badly Conditioned Data. . In 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy. https://doi.org/10.1109/ETFA.2018.8502485 bjps: Dörksen H and Lohweg V (2018) Linear Classification of Badly Conditioned Data. . 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy. chicago: Dörksen, Helene, and Volker Lohweg. “Linear Classification of Badly Conditioned Data. .” In 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy, 2018. https://doi.org/10.1109/ETFA.2018.8502485. chicago-de: 'Dörksen, Helene und Volker Lohweg. 2018. Linear Classification of Badly Conditioned Data. . In: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy. doi:10.1109/ETFA.2018.8502485, .' din1505-2-1: 'Dörksen, Helene ; Lohweg, Volker: Linear Classification of Badly Conditioned Data. . In: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy, 2018' havard: 'H. Dörksen, V. Lohweg, Linear Classification of Badly Conditioned Data. , in: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Torino, Italy, 2018.' ieee: H. Dörksen and V. Lohweg, “Linear Classification of Badly Conditioned Data. ,” in 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Turin, Italy , 2018. mla: Dörksen, Helene, and Volker Lohweg. “Linear Classification of Badly Conditioned Data. .” 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2018, doi:10.1109/ETFA.2018.8502485. short: 'H. Dörksen, V. Lohweg, in: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Torino, Italy, 2018.' ufg: 'Dörksen, Helene/Lohweg, Volker (2018): Linear Classification of Badly Conditioned Data. , in: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Torino, Italy.' van: 'Dörksen H, Lohweg V. Linear Classification of Badly Conditioned Data. . In: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy; 2018.' conference: end_date: 2018-09-07 location: ' Turin, Italy ' name: ' IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA) 2018' start_date: 2018-09-04 date_created: 2019-11-25T08:35:44Z date_updated: 2023-03-15T13:49:38Z department: - _id: DEP5023 doi: 10.1109/ETFA.2018.8502485 keyword: - Task analysis - Software - Linear discriminant analysis - Dimensionality reduction - Mathematical model - Covariance matrices - Measurement language: - iso: eng main_file_link: - open_access: '1' url: https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8502485 oa: '1' place: Torino, Italy publication: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) status: public title: 'Linear Classification of Badly Conditioned Data. ' type: conference user_id: '15514' year: 2018 ... --- _id: '549' author: - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Sarah full_name: Nothdurft, Sarah last_name: Nothdurft - first_name: Rabi full_name: Lahdo, Rabi last_name: Lahdo - first_name: Oliver full_name: Seffer, Oliver last_name: Seffer citation: ama: 'Springer A, Nothdurft S, Lahdo R, Seffer O. Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. Lemgo: Technische Hochschule Ostwestfalen-Lippe; 2018.' apa: 'Springer, A., Nothdurft, S., Lahdo, R., & Seffer, O. (2018). Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. 8th International Conference on Production Engineering and Management. Lemgo: Technische Hochschule Ostwestfalen-Lippe.' bjps: 'Springer A et al. (2018) Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. Lemgo: Technische Hochschule Ostwestfalen-Lippe.' chicago: 'Springer, André, Sarah Nothdurft, Rabi Lahdo, and Oliver Seffer. Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. 8th International Conference on Production Engineering and Management. Lemgo: Technische Hochschule Ostwestfalen-Lippe, 2018.' chicago-de: 'Springer, André, Sarah Nothdurft, Rabi Lahdo und Oliver Seffer. 2018. Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. 8th International Conference on Production Engineering and Management. Lemgo: Technische Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Springer, André ; Nothdurft, Sarah ; Lahdo, Rabi ; Seffer, Oliver: Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. Lemgo : Technische Hochschule Ostwestfalen-Lippe, 2018' havard: A. Springer, S. Nothdurft, R. Lahdo, O. Seffer, Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow, Technische Hochschule Ostwestfalen-Lippe, Lemgo, 2018. ieee: 'A. Springer, S. Nothdurft, R. Lahdo, and O. Seffer, Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. Lemgo: Technische Hochschule Ostwestfalen-Lippe, 2018.' mla: Springer, André, et al. “Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow.” 8th International Conference on Production Engineering and Management, Technische Hochschule Ostwestfalen-Lippe, 2018. short: A. Springer, S. Nothdurft, R. Lahdo, O. Seffer, Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow, Technische Hochschule Ostwestfalen-Lippe, Lemgo, 2018. ufg: 'Springer, André et. al. (2018): Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow, Lemgo.' van: 'Springer A, Nothdurft S, Lahdo R, Seffer O. Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. 8th International Conference on Production Engineering and Management. Lemgo: Technische Hochschule Ostwestfalen-Lippe; 2018.' conference: end_date: 2018-10-05 location: Lemgo name: 8th International Conference start_date: 2018-10-04 date_created: 2019-02-13T13:42:56Z date_updated: 2023-03-15T13:49:59Z department: - _id: DEP1306 - _id: DEP7037 keyword: - Dissimilar metal joints - Laser processes - Multi-material components language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf oa: '1' place: Lemgo publication: 8th International Conference on Production Engineering and Management publication_identifier: isbn: - 978-3-946856-03-0 publication_status: published publisher: Technische Hochschule Ostwestfalen-Lippe related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf status: public title: Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow type: conference_editor_article user_id: '79260' year: 2018 ... --- _id: '551' abstract: - lang: eng text: Companies that use product lifecycle management (PLM) systems need to configure them individually. Such configuration is considered as a software development process. This article demonstrates how the software development process for PLM configuration can be improved by applying applicationlifecycle management (ALM) concepts. This paper explains how such a conceptdesigncan be created and implemented. The concept was evaluated in a real industrial case study. By this, it provides valuable insights useablefor any company, facing similar challenges as depicted in this paper. author: - first_name: Martin full_name: Heister, Martin id: '68780' last_name: Heister - first_name: Andreas full_name: Deuter, Andreas id: '62088' last_name: Deuter - first_name: B. full_name: Schrader, B. last_name: Schrader citation: ama: 'Heister M, Deuter A, Schrader B. Design of an ALM-Based Process for Configuring PLM Systems. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2018:31-41.' apa: Heister, M., Deuter, A., & Schrader, B. (2018). Design of an ALM-Based Process for Configuring PLM Systems. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 31–41). Lemgo. bjps: Heister M, Deuter A and Schrader B (2018) Design of an ALM-Based Process for Configuring PLM Systems. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 31–41. chicago: Heister, Martin, Andreas Deuter, and B. Schrader. “Design of an ALM-Based Process for Configuring PLM Systems.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 31–41. Lemgo, 2018. chicago-de: 'Heister, Martin, Andreas Deuter und B. Schrader. 2018. Design of an ALM-Based Process for Configuring PLM Systems. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 31–41. Lemgo.' din1505-2-1: 'Heister, Martin ; Deuter, Andreas ; Schrader, B.: Design of an ALM-Based Process for Configuring PLM Systems. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2018, S. 31–41' havard: 'M. Heister, A. Deuter, B. Schrader, Design of an ALM-Based Process for Configuring PLM Systems, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp. 31–41.' ieee: M. Heister, A. Deuter, and B. Schrader, “Design of an ALM-Based Process for Configuring PLM Systems,” in Production Engineering and Management, Lemgo, 2018, no. 1, pp. 31–41. mla: Heister, Martin, et al. “Design of an ALM-Based Process for Configuring PLM Systems.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 31–41. short: 'M. Heister, A. Deuter, B. Schrader, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018, pp. 31–41.' ufg: 'Heister, Martin et. al. (2018): Design of an ALM-Based Process for Configuring PLM Systems, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 31–41.' van: 'Heister M, Deuter A, Schrader B. Design of an ALM-Based Process for Configuring PLM Systems. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2018. p. 31–41.' conference: end_date: 2018-10-05 location: Lemgo name: Proceedings 8th International Conference start_date: 2018-10-04 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-13T14:03:03Z date_updated: 2023-03-15T13:50:00Z department: - _id: DEP1306 - _id: DEP7022 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - PLM - ALM - Software engineering - V-model - Scrum language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf oa: '1' page: 31-41 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-946856-03-0 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf status: public title: Design of an ALM-Based Process for Configuring PLM Systems type: conference user_id: '62088' year: 2018 ... --- _id: '12239' abstract: - lang: eng text: The modelling community has identified challenges for the integration and assessment of lake models due to the diversity of modelling approaches and lakes. In this study, we develop and assess a one-dimensional lake model and apply it to 32 lakes from a global observatory network. The data set included lakes over broad ranges in latitude, climatic zones, size, residence time, mixing regime and trophic level. Model performance was evaluated using several error assessment metrics, and a sensitivity analysis was conducted for nine parameters that governed the surface heat exchange and mixing efficiency. There was low correlation between input data uncertainty and model performance and predictions of temperature were less sensitive to model parameters than prediction of thermocline depth and Schmidt stability. The study provides guidance to where the general model approach and associated assumptions work, and cases where adjustments to model parameterisations and/or structure are required. author: - first_name: Louise C. full_name: Bruce, Louise C. last_name: Bruce - first_name: Marieke A. full_name: Frassl, Marieke A. last_name: Frassl - first_name: George B. full_name: Arhonditsis, George B. last_name: Arhonditsis - first_name: Gideon full_name: Gal, Gideon last_name: Gal - first_name: David P. full_name: Hamilton, David P. last_name: Hamilton - first_name: Paul C. full_name: Hanson, Paul C. last_name: Hanson - first_name: Amy L. full_name: Hetherington, Amy L. last_name: Hetherington - first_name: John M. full_name: Melack, John M. last_name: Melack - first_name: Jordan S. full_name: Read, Jordan S. last_name: Read - first_name: Karsten full_name: Rinke, Karsten last_name: Rinke - first_name: Anna full_name: Rigosi, Anna last_name: Rigosi - first_name: Dennis full_name: Trolle, Dennis last_name: Trolle - first_name: Luke full_name: Winslow, Luke last_name: Winslow - first_name: Rita full_name: Adrian, Rita last_name: Adrian - first_name: Ana I. full_name: Ayala, Ana I. last_name: Ayala - first_name: Serghei A. full_name: Bocaniov, Serghei A. last_name: Bocaniov - first_name: Bertram full_name: Boehrer, Bertram last_name: Boehrer - first_name: Casper full_name: Boon, Casper last_name: Boon - first_name: Justin D. full_name: Brookes, Justin D. last_name: Brookes - first_name: Thomas full_name: Bueche, Thomas last_name: Bueche - first_name: Brendan D. full_name: Busch, Brendan D. last_name: Busch - first_name: Diego full_name: Copetti, Diego last_name: Copetti - first_name: Alicia full_name: Cortés, Alicia last_name: Cortés - first_name: Elvira full_name: de Eyto, Elvira last_name: de Eyto - first_name: J. Alex full_name: Elliott, J. Alex last_name: Elliott - first_name: Nicole full_name: Gallina, Nicole last_name: Gallina - first_name: Yael full_name: Gilboa, Yael last_name: Gilboa - first_name: Nicolas full_name: Guyennon, Nicolas last_name: Guyennon - first_name: Lei full_name: Huang, Lei last_name: Huang - first_name: Onur full_name: Kerimoglu, Onur last_name: Kerimoglu - first_name: John D. full_name: Lenters, John D. last_name: Lenters - first_name: Sally full_name: MacIntyre, Sally last_name: MacIntyre - first_name: Vardit full_name: Makler-Pick, Vardit last_name: Makler-Pick - first_name: Chris G. full_name: McBride, Chris G. last_name: McBride - first_name: Santiago full_name: Moreira, Santiago last_name: Moreira - first_name: Deniz full_name: Özkundakci, Deniz last_name: Özkundakci - first_name: Marco full_name: Pilotti, Marco last_name: Pilotti - first_name: Francisco J. full_name: Rueda, Francisco J. last_name: Rueda - first_name: James A. full_name: Rusak, James A. last_name: Rusak - first_name: Nihar R. full_name: Samal, Nihar R. last_name: Samal - first_name: Martin full_name: Schmid, Martin last_name: Schmid - first_name: Tom full_name: Shatwell, Tom id: '86424' last_name: Shatwell orcid: 0000-0002-4520-7916 - first_name: Craig full_name: Snorthheim, Craig last_name: Snorthheim - first_name: Frédéric full_name: Soulignac, Frédéric last_name: Soulignac - first_name: Giulia full_name: Valerio, Giulia last_name: Valerio - first_name: Leon full_name: van der Linden, Leon last_name: van der Linden - first_name: Mark full_name: Vetter, Mark last_name: Vetter - first_name: Brigitte full_name: Vinçon-Leite, Brigitte last_name: Vinçon-Leite - first_name: Junbo full_name: Wang, Junbo last_name: Wang - first_name: Michael full_name: Weber, Michael last_name: Weber - first_name: Chaturangi full_name: Wickramaratne, Chaturangi last_name: Wickramaratne - first_name: R. Iestyn full_name: Woolway, R. Iestyn last_name: Woolway - first_name: Huaxia full_name: Yao, Huaxia last_name: Yao - first_name: Matthew R. full_name: Hipsey, Matthew R. last_name: Hipsey citation: ama: 'Bruce LC, Frassl MA, Arhonditsis GB, et al. A multi-lake comparative analysis of the General Lake Model (GLM): Stress-testing across a global observatory network. Environmental modelling & software with environment data news . 2018;102(4):274-291. doi:10.1016/j.envsoft.2017.11.016' apa: 'Bruce, L. C., Frassl, M. A., Arhonditsis, G. B., Gal, G., Hamilton, D. P., Hanson, P. C., Hetherington, A. L., Melack, J. M., Read, J. S., Rinke, K., Rigosi, A., Trolle, D., Winslow, L., Adrian, R., Ayala, A. I., Bocaniov, S. A., Boehrer, B., Boon, C., Brookes, J. D., … Hipsey, M. R. (2018). A multi-lake comparative analysis of the General Lake Model (GLM): Stress-testing across a global observatory network. Environmental Modelling & Software with Environment Data News , 102(4), 274–291. https://doi.org/10.1016/j.envsoft.2017.11.016' bjps: 'Bruce LC et al. (2018) A Multi-Lake Comparative Analysis of the General Lake Model (GLM): Stress-Testing across a Global Observatory Network. Environmental modelling & software with environment data news 102, 274–291.' chicago: 'Bruce, Louise C., Marieke A. Frassl, George B. Arhonditsis, Gideon Gal, David P. Hamilton, Paul C. Hanson, Amy L. Hetherington, et al. “A Multi-Lake Comparative Analysis of the General Lake Model (GLM): Stress-Testing across a Global Observatory Network.” Environmental Modelling & Software with Environment Data News 102, no. 4 (2018): 274–91. https://doi.org/10.1016/j.envsoft.2017.11.016.' chicago-de: 'Bruce, Louise C., Marieke A. Frassl, George B. Arhonditsis, Gideon Gal, David P. Hamilton, Paul C. Hanson, Amy L. Hetherington, u. a. 2018. A multi-lake comparative analysis of the General Lake Model (GLM): Stress-testing across a global observatory network. Environmental modelling & software with environment data news 102, Nr. 4: 274–291. doi:10.1016/j.envsoft.2017.11.016, .' din1505-2-1: 'Bruce, Louise C. ; Frassl, Marieke A. ; Arhonditsis, George B. ; Gal, Gideon ; Hamilton, David P. ; Hanson, Paul C. ; Hetherington, Amy L. ; Melack, John M. ; u. a.: A multi-lake comparative analysis of the General Lake Model (GLM): Stress-testing across a global observatory network. In: Environmental modelling & software with environment data news Bd. 102. Oxford, Elsevier Science (2018), Nr. 4, S. 274–291' havard: 'L.C. Bruce, M.A. Frassl, G.B. Arhonditsis, G. Gal, D.P. Hamilton, P.C. Hanson, A.L. Hetherington, J.M. Melack, J.S. Read, K. Rinke, A. Rigosi, D. Trolle, L. Winslow, R. Adrian, A.I. Ayala, S.A. Bocaniov, B. Boehrer, C. Boon, J.D. Brookes, T. Bueche, B.D. Busch, D. Copetti, A. Cortés, E. de Eyto, J.A. Elliott, N. Gallina, Y. Gilboa, N. Guyennon, L. Huang, O. Kerimoglu, J.D. Lenters, S. MacIntyre, V. Makler-Pick, C.G. McBride, S. Moreira, D. Özkundakci, M. Pilotti, F.J. Rueda, J.A. Rusak, N.R. Samal, M. Schmid, T. Shatwell, C. Snorthheim, F. Soulignac, G. Valerio, L. van der Linden, M. Vetter, B. Vinçon-Leite, J. Wang, M. Weber, C. Wickramaratne, R.I. Woolway, H. Yao, M.R. Hipsey, A multi-lake comparative analysis of the General Lake Model (GLM): Stress-testing across a global observatory network, Environmental Modelling & Software with Environment Data News . 102 (2018) 274–291.' ieee: 'L. C. Bruce et al., “A multi-lake comparative analysis of the General Lake Model (GLM): Stress-testing across a global observatory network,” Environmental modelling & software with environment data news , vol. 102, no. 4, pp. 274–291, 2018, doi: 10.1016/j.envsoft.2017.11.016.' mla: 'Bruce, Louise C., et al. “A Multi-Lake Comparative Analysis of the General Lake Model (GLM): Stress-Testing across a Global Observatory Network.” Environmental Modelling & Software with Environment Data News , vol. 102, no. 4, 2018, pp. 274–91, https://doi.org/10.1016/j.envsoft.2017.11.016.' short: L.C. Bruce, M.A. Frassl, G.B. Arhonditsis, G. Gal, D.P. Hamilton, P.C. Hanson, A.L. Hetherington, J.M. Melack, J.S. Read, K. Rinke, A. Rigosi, D. Trolle, L. Winslow, R. Adrian, A.I. Ayala, S.A. Bocaniov, B. Boehrer, C. Boon, J.D. Brookes, T. Bueche, B.D. Busch, D. Copetti, A. Cortés, E. de Eyto, J.A. Elliott, N. Gallina, Y. Gilboa, N. Guyennon, L. Huang, O. Kerimoglu, J.D. Lenters, S. MacIntyre, V. Makler-Pick, C.G. McBride, S. Moreira, D. Özkundakci, M. Pilotti, F.J. Rueda, J.A. Rusak, N.R. Samal, M. Schmid, T. Shatwell, C. Snorthheim, F. Soulignac, G. Valerio, L. van der Linden, M. Vetter, B. Vinçon-Leite, J. Wang, M. Weber, C. Wickramaratne, R.I. Woolway, H. Yao, M.R. Hipsey, Environmental Modelling & Software with Environment Data News 102 (2018) 274–291. ufg: 'Bruce, Louise C. u. a.: A multi-lake comparative analysis of the General Lake Model (GLM): Stress-testing across a global observatory network, in: Environmental modelling & software with environment data news 102 (2018), H. 4,  S. 274–291.' van: 'Bruce LC, Frassl MA, Arhonditsis GB, Gal G, Hamilton DP, Hanson PC, et al. A multi-lake comparative analysis of the General Lake Model (GLM): Stress-testing across a global observatory network. Environmental modelling & software with environment data news . 2018;102(4):274–91.' date_created: 2024-12-08T20:32:07Z date_updated: 2024-12-09T10:13:47Z department: - _id: DEP8022 doi: 10.1016/j.envsoft.2017.11.016 extern: '1' intvolume: ' 102' issue: '4' keyword: - Lake model - Stratification - GLM - Model assessment - Global observatory data - Network science language: - iso: eng main_file_link: - url: https://doi.org/10.1016/j.envsoft.2017.11.016 page: 274-291 place: Oxford publication: 'Environmental modelling & software with environment data news ' publication_identifier: eissn: - 1873-6726 issn: - 1364-8152 publication_status: published publisher: Elsevier Science quality_controlled: '1' status: public title: 'A multi-lake comparative analysis of the General Lake Model (GLM): Stress-testing across a global observatory network' type: scientific_journal_article user_id: '83781' volume: 102 year: '2018' ... --- _id: '12856' abstract: - lang: eng text: Multimodal interfaces provide users with a number of different ways of interacting with a system. This paper proposes the integration of an explicit interaction model as an extension of the well-known MVC architectural pattern. It builds upon previous extensions regarding explicit structure, user interface (UI), and environmental models. In addition, this paper proposes an explicit UI layer in a service-oriented hypermedia infrastructure to address requirements from multimodal interfaces. author: - first_name: Jessica full_name: Rubart, Jessica id: '45672' last_name: Rubart citation: ama: Rubart J. Multimodal Interaction with Hypermedia Structures. (Atzenbeck C, Association for Computing Machinery-Digital Library, eds.). ACM; 2018:17-21. doi:10.1145/3215611.3215613 apa: Rubart, J. (2018). Multimodal Interaction with Hypermedia Structures. In C. Atzenbeck & Association for Computing Machinery-Digital Library (Eds.), Proceedings of the 1st Workshop on Human Factors in Hypertext (pp. 17–21). ACM. https://doi.org/10.1145/3215611.3215613 bjps: Rubart J (2018) Multimodal Interaction with Hypermedia Structures, Atzenbeck C and Association for Computing Machinery-Digital Library (eds). ACM. chicago: Rubart, Jessica. Multimodal Interaction with Hypermedia Structures. Edited by Claus Atzenbeck and Association for Computing Machinery-Digital Library. Proceedings of the 1st Workshop on Human Factors in Hypertext. ACM Digital Library. ACM, 2018. https://doi.org/10.1145/3215611.3215613. chicago-de: Rubart, Jessica. 2018. Multimodal Interaction with Hypermedia Structures. Hg. von Claus Atzenbeck und Association for Computing Machinery-Digital Library. Proceedings of the 1st Workshop on Human Factors in Hypertext. ACM Digital Library. ACM. doi:10.1145/3215611.3215613, . din1505-2-1: 'Rubart, Jessica ; Atzenbeck, C. ; Association for Computing Machinery-Digital Library (Hrsg.): Multimodal Interaction with Hypermedia Structures, ACM Digital Library : ACM, 2018' havard: J. Rubart, Multimodal Interaction with Hypermedia Structures, ACM, 2018. ieee: 'J. Rubart, Multimodal Interaction with Hypermedia Structures. ACM, 2018, pp. 17–21. doi: 10.1145/3215611.3215613.' mla: Rubart, Jessica. “Multimodal Interaction with Hypermedia Structures.” Proceedings of the 1st Workshop on Human Factors in Hypertext, edited by Claus Atzenbeck and Association for Computing Machinery-Digital Library, ACM, 2018, pp. 17–21, https://doi.org/10.1145/3215611.3215613. short: J. Rubart, Multimodal Interaction with Hypermedia Structures, ACM, 2018. ufg: 'Rubart, Jessica: Multimodal Interaction with Hypermedia Structures, hg. von Atzenbeck, Claus, Association for Computing Machinery-Digital Library, o. O. 2018 (ACM Digital Library).' van: Rubart J. Multimodal Interaction with Hypermedia Structures. Atzenbeck C, Association for Computing Machinery-Digital Library, editors. Proceedings of the 1st Workshop on Human Factors in Hypertext. ACM; 2018. (ACM Digital Library). conference: end_date: 2018-07-09 location: Baltimore, MD name: 1st Workshop on Human Factors in Hypertext (HUMAN) start_date: 2018-07-09 corporate_editor: - Association for Computing Machinery-Digital Library date_created: 2025-04-24T07:26:58Z date_updated: 2025-06-26T13:23:32Z department: - _id: DEP8000 - _id: DEP8008 doi: 10.1145/3215611.3215613 editor: - first_name: Claus full_name: Atzenbeck, Claus last_name: Atzenbeck keyword: - Multimodal interaction - hypermedia structures - hypertext infrastructure - structure model - interaction model - MVC - digital boardroom language: - iso: eng page: 17-21 publication: Proceedings of the 1st Workshop on Human Factors in Hypertext publication_identifier: isbn: - 978-1-4503-5658-9 publication_status: published publisher: ACM series_title: ACM Digital Library status: public title: Multimodal Interaction with Hypermedia Structures type: conference_editor_article user_id: '83781' year: '2018' ... --- _id: '570' abstract: - lang: eng text: Additive manufacturing (AM) has matured rapidly during the last years due to the advancement of AM machines and materials. Nevertheless, the widespread adoption of AM is still challenged by producing parts with reliable quality. The aim of this paper is t o introduce a first approach to apply in-situ monitoring for quality evaluation of produced parts. Based on the monitored data, a model is developed, in order to predict the quality of ready built parts. author: - first_name: Eva full_name: Scheideler, Eva id: '61522' last_name: Scheideler - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: 'Scheideler E, Huxol A, Villmer F-J. Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineeringand Management. Publication series in direct digital manufacturing . Lemgo; 2017:89-100.' apa: Scheideler, E., Huxol, A., & Villmer, F.-J. (2017). Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineeringand Management (pp. 89–100). Lemgo. bjps: Scheideler E, Huxol A and Villmer F-J (2017) Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineeringand Management. Lemgo, pp. 89–100. chicago: Scheideler, Eva, Andrea Huxol, and Franz-Josef Villmer. “Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models.” In Production Engineeringand Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 89–100. Publication Series in Direct Digital Manufacturing . Lemgo, 2017. chicago-de: 'Scheideler, Eva, Andrea Huxol und Franz-Josef Villmer. 2017. Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In: Production Engineeringand Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 89–100. Publication series in direct digital manufacturing . Lemgo.' din1505-2-1: 'Scheideler, Eva ; Huxol, Andrea ; Villmer, Franz-Josef: Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineeringand Management, Publication series in direct digital manufacturing . Lemgo, 2017, S. 89–100' havard: 'E. Scheideler, A. Huxol, F.-J. Villmer, Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineeringand Management, Lemgo, 2017: pp. 89–100.' ieee: E. Scheideler, A. Huxol, and F.-J. Villmer, “Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models,” in Production Engineeringand Management, Pordenone, Italy, 2017, no. 1, pp. 89–100. mla: Scheideler, Eva, et al. “Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models.” Production Engineeringand Management, edited by Elio Padoano et al., no. 1, 2017, pp. 89–100. short: 'E. Scheideler, A. Huxol, F.-J. Villmer, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineeringand Management, Lemgo, 2017, pp. 89–100.' ufg: 'Scheideler, Eva et. al. (2017): Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models, in: Elio Padoano et. al. (Hgg.): Production Engineeringand Management (=Publication series in direct digital manufacturing ), Lemgo, S. 89–100.' van: 'Scheideler E, Huxol A, Villmer F-J. Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineeringand Management. Lemgo; 2017. p. 89–100. (Publication series in direct digital manufacturing ).' conference: end_date: 2017-09-29 location: Pordenone, Italy name: Proceedings7th International Conference start_date: 2017-09-28 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T09:46:43Z date_updated: 2023-03-15T13:50:01Z department: - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer issue: '1' keyword: - Nondestructive quality control - Predictive analytics - Metal model - Additive manufacturing language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf oa: '1' page: 89-100 place: Lemgo publication: Production Engineeringand Management publication_identifier: isbn: - 978-3-946856-01-6 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf series_title: 'Publication series in direct digital manufacturing ' status: public title: Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models type: conference user_id: '45673' year: 2017 ... --- _id: '578' abstract: - lang: eng text: Challenges of companies are presented by an increasing number of product variants or a growing product complexity in combination with a reduction of lot size. Therefore the scope of the work in the field of manual assembly will be more complex. This situation leads to a need of assistance systems. With these systems, the assembly workers will be qualified to execute their work tasks within the requirements. This approach set up on a further implementation of an assistance system at a great device manufacturer. The main focus of this implementation was the technical and functional design of the assistance system, but a successful implementation requires also an active handling of the change process. The purpose of this paper is the presentation of design principles in form of a process model for the implementation of digital assistance systems. The development of the design principles takes place in a participative approach. Executives, work councilsand workers develop the project results together with external project members. Project managers will be able to manage implementation processes with the results and take all the success factors into account. author: - first_name: Tim full_name: Kleineberg, Tim id: '65024' last_name: Kleineberg - first_name: Matthias full_name: Eichelberg, Matthias id: '60217' last_name: Eichelberg - first_name: Sven full_name: Hinrichsen, Sven id: '49010' last_name: Hinrichsen citation: ama: 'Kleineberg T, Eichelberg M, Hinrichsen S. Participative Development of an Implementation Process for Worker Assistance Systems. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2017:25-36.' apa: Kleineberg, T., Eichelberg, M., & Hinrichsen, S. (2017). Participative Development of an Implementation Process for Worker Assistance Systems. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 25–36). Lemgo. bjps: Kleineberg T, Eichelberg M and Hinrichsen S (2017) Participative Development of an Implementation Process for Worker Assistance Systems. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 25–36. chicago: Kleineberg, Tim, Matthias Eichelberg, and Sven Hinrichsen. “Participative Development of an Implementation Process for Worker Assistance Systems.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 25–36. Lemgo, 2017. chicago-de: 'Kleineberg, Tim, Matthias Eichelberg und Sven Hinrichsen. 2017. Participative Development of an Implementation Process for Worker Assistance Systems. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 25–36. Lemgo.' din1505-2-1: 'Kleineberg, Tim ; Eichelberg, Matthias ; Hinrichsen, Sven: Participative Development of an Implementation Process for Worker Assistance Systems. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2017, S. 25–36' havard: 'T. Kleineberg, M. Eichelberg, S. Hinrichsen, Participative Development of an Implementation Process for Worker Assistance Systems, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017: pp. 25–36.' ieee: T. Kleineberg, M. Eichelberg, and S. Hinrichsen, “Participative Development of an Implementation Process for Worker Assistance Systems,” in Production Engineering and Management, Pordenone, Italy, 2017, no. 1, pp. 25–36. mla: Kleineberg, Tim, et al. “Participative Development of an Implementation Process for Worker Assistance Systems.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2017, pp. 25–36. short: 'T. Kleineberg, M. Eichelberg, S. Hinrichsen, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017, pp. 25–36.' ufg: 'Kleineberg, Tim et. al. (2017): Participative Development of an Implementation Process for Worker Assistance Systems, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 25–36.' van: 'Kleineberg T, Eichelberg M, Hinrichsen S. Participative Development of an Implementation Process for Worker Assistance Systems. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2017. p. 25–36.' conference: end_date: 2017-09-29 location: Pordenone, Italy name: Proceedings 7th International Conference start_date: 2017-09-28 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T11:34:36Z date_updated: 2023-03-15T13:50:01Z department: - _id: DEP1306 - _id: DEP7020 - _id: DEP1305 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer issue: '1' keyword: - Assistance systems - Change management - Success factors - Process model language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf oa: '1' page: 25-36 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-946856-01-6 publication_status: published quality_controlled: '1' status: public title: Participative Development of an Implementation Process for Worker Assistance Systems type: conference user_id: '49010' year: 2017 ... --- _id: '593' abstract: - lang: eng text: Due to the increased individualization of customer demands in the last 20 years, the production systems are required to be more flexible and scalable. It is the samefor the material flow system with automated guided vehicles (AGVs). To realize the flexibility and scalability, it is recommended to decentralized control the vehicles. As an attempt, a concept of swarm intelligence with Radio Frequency Identification (RFID) is proposed and introduced in this article. The concept is supposed to be used for automated guided vehicle systems in which objects have to be transported from place to place. Therefore the object has to be self-organized and has to manage its own transport. In this context the vehicles have to choose the most optimal transportation. Swarm intelligence is a topic which deserves a high level of attention as a method to realize high flexibility and scalability. author: - first_name: Alisa Maria full_name: Cantauw, Alisa Maria id: '56638' last_name: Cantauw - first_name: Li full_name: Li, Li id: '58482' last_name: Li citation: ama: 'Cantauw AM, Li L. Application of Swarm Intelligence for Automated Guided Vehicle Systems. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Department of Production Engineering and Management. Lemgo; 2016:133-143.' apa: Cantauw, A. M., & Li, L. (2016). Application of Swarm Intelligence for Automated Guided Vehicle Systems. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Department of Production Engineering and Management (pp. 133–143). Lemgo. bjps: Cantauw AM and Li L (2016) Application of Swarm Intelligence for Automated Guided Vehicle Systems. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Department of Production Engineering and Management. Lemgo, pp. 133–143. chicago: Cantauw, Alisa Maria, and Li Li. “Application of Swarm Intelligence for Automated Guided Vehicle Systems.” In Department of Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 133–43. Lemgo, 2016. chicago-de: 'Cantauw, Alisa Maria und Li Li. 2016. Application of Swarm Intelligence for Automated Guided Vehicle Systems. In: Department of Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 133–143. Lemgo.' din1505-2-1: 'Cantauw, Alisa Maria ; Li, Li: Application of Swarm Intelligence for Automated Guided Vehicle Systems. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Department of Production Engineering and Management. Lemgo, 2016, S. 133–143' havard: 'A.M. Cantauw, L. Li, Application of Swarm Intelligence for Automated Guided Vehicle Systems, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Department of Production Engineering and Management, Lemgo, 2016: pp. 133–143.' ieee: A. M. Cantauw and L. Li, “Application of Swarm Intelligence for Automated Guided Vehicle Systems,” in Department of Production Engineering and Management, Lemgo, 2016, no. 1, pp. 133–143. mla: Cantauw, Alisa Maria, and Li Li. “Application of Swarm Intelligence for Automated Guided Vehicle Systems.” Department of Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2016, pp. 133–43. short: 'A.M. Cantauw, L. Li, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Department of Production Engineering and Management, Lemgo, 2016, pp. 133–143.' ufg: 'Cantauw, Alisa Maria/Li, Li (2016): Application of Swarm Intelligence for Automated Guided Vehicle Systems, in: Franz-Josef Villmer et. al. (Hgg.): Department of Production Engineering and Management, Lemgo, S. 133–143.' van: 'Cantauw AM, Li L. Application of Swarm Intelligence for Automated Guided Vehicle Systems. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Department of Production Engineering and Management. Lemgo; 2016. p. 133–43.' conference: end_date: 2016-09-30 location: Lemgo name: Proceedings 6th International Conference start_date: 2016-09-29 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T15:32:10Z date_updated: 2023-03-15T13:50:03Z department: - _id: DEP7000 - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Swarm intelligence - Automated guided vehicle system - RFID - Internet of things - Multi-agent system language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf oa: '1' page: 133-143 place: Lemgo publication: Department of Production Engineering and Management publication_identifier: isbn: - 978-3-946856-00-9 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf status: public title: Application of Swarm Intelligence for Automated Guided Vehicle Systems type: conference user_id: '45673' year: 2016 ... --- _id: '594' abstract: - lang: eng text: Due to steadily increased demand for customized products, as well as their enhanced complexity and shorter product lifecycles, companies in all industries require a reliable prediction of the expected product development costs from the very start of product realization. Incorrectly estimated project costs may lead to serious consequences in the course of a development project. For example, offers are most often based on such early cost estimations and consequently, a major safety margin has to be added, which may result in the refusal of an order. A too low estimation of the costs of aproduct development project, on the other hand, may result in a loss for the project.In this paper, a software tool is presented for the prediction of product development costs which offers the user the ability to create a more accurate prediction of project costs on the basis of a minimum of retrograde project information. By combining a parametric cost model and cost result with stochastic character, based on the Monte Carlo method, in one software system, it is possible to significantly improve projectcost estimations. author: - first_name: Andreas full_name: Otte, Andreas id: '51466' last_name: Otte - first_name: Eva full_name: Scheideler, Eva id: '61522' last_name: Scheideler - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: 'Otte A, Scheideler E, Villmer F-J. Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Department of Production Engineering and Management. Lemgo; 2016:281-292.' apa: Otte, A., Scheideler, E., & Villmer, F.-J. (2016). Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Department of Production Engineering and Management (pp. 281–292). Lemgo. bjps: Otte A, Scheideler E and Villmer F-J (2016) Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Department of Production Engineering and Management. Lemgo, pp. 281–292. chicago: Otte, Andreas, Eva Scheideler, and Franz-Josef Villmer. “Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage.” In Department of Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 281–92. Lemgo, 2016. chicago-de: 'Otte, Andreas, Eva Scheideler und Franz-Josef Villmer. 2016. Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage. In: Department of Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 281–292. Lemgo.' din1505-2-1: 'Otte, Andreas ; Scheideler, Eva ; Villmer, Franz-Josef: Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Department of Production Engineering and Management. Lemgo, 2016, S. 281–292' havard: 'A. Otte, E. Scheideler, F.-J. Villmer, Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Department of Production Engineering and Management, Lemgo, 2016: pp. 281–292.' ieee: A. Otte, E. Scheideler, and F.-J. Villmer, “Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage,” in Department of Production Engineering and Management, Lemgo, 2016, no. 1, pp. 281–292. mla: Otte, Andreas, et al. “Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage.” Department of Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2016, pp. 281–92. short: 'A. Otte, E. Scheideler, F.-J. Villmer, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Department of Production Engineering and Management, Lemgo, 2016, pp. 281–292.' ufg: 'Otte, Andreas et. al. (2016): Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage, in: Franz-Josef Villmer et. al. (Hgg.): Department of Production Engineering and Management, Lemgo, S. 281–292.' van: 'Otte A, Scheideler E, Villmer F-J. Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Department of Production Engineering and Management. Lemgo; 2016. p. 281–92.' conference: end_date: 2016-09-30 location: Lemgo name: Proceedings 6th International Conference start_date: 2016-09-29 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T15:41:41Z date_updated: 2023-03-15T13:50:03Z department: - _id: DEP7000 - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Cost prediction - Product realization projects - Monte Carlo method - Parametric cost model - Software tool language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf oa: '1' page: 281-292 place: Lemgo publication: Department of Production Engineering and Management publication_identifier: isbn: - 978-3-946856-00-9 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf status: public title: Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage type: conference user_id: '45673' year: 2016 ... --- _id: '10066' abstract: - lang: eng text: Namibia is the most arid country in Sub-Saharan Africa. The Cuvelai-Etosha Basin (CEB) in central northern Namibia in particular is experiencing various ecological and social-ecological challenges such as high climate variability, saline groundwater, dependence on Angola for freshwater supply, high population growth and density, and increasing urbanisation. These challenges make water supply and management difficult and threaten the livelihood of the local population and the health of the ecosystem. Facing up to these challenges, the German-Namibian research project CuveWaters has developed, adapted and set up different technologies as pilot plant s. The Integrated Water Resources Management (IWRM) concept of CuveWaters is based on a multi-resource-mix in which water is obtained from different sources (rainwater, floodwater, groundwater and wastewater) and used for various purposes. High quality water is used as drinking water; water of a relatively low quality is used for irrigation. In cooperation with the residents of four villages and one small town, the project partners are implementing different technologies to collect and store, produce, treat and reuse water. The implemented technologies are rain- and floodwater harvesting, groundwater desalination, and the combination of sanitation, wastewater treatment and water reuse. The aim is to improve peoples’ livelihood through research on innovative and adapted solutions which contribute to a successful and adapted application of IWRM. To this end, the project integrates science, technology and societal aspects in a transdisciplinary research approach by linking scientific knowledge from natural, engineering and social sciences with the everyday practices and know-how of the stakeholders involved. Thus, the technical aspects are complemented by a wide range of societal and scientific components, such as capacity development, monitoring, participation or knowledge management. These ensure societal embedding of the technologies and knowledge transfer. This paper will illustrate the transdisciplinary approach, implemented technologies and accompanying measures as well as key results. author: - first_name: Stephan full_name: Lier, Stephan last_name: Lier - first_name: Maria full_name: Brenda, Maria last_name: Brenda - first_name: Peter full_name: Cornel, Peter last_name: Cornel - first_name: Juta full_name: Deffner, Juta last_name: Deffner - first_name: Jörg full_name: Felmeden, Jörg id: '81335' last_name: Felmeden - first_name: Alexander full_name: Jokisch, Alexander last_name: Jokisch - first_name: Thomas full_name: Kluge, Thomas last_name: Kluge - first_name: Katherina full_name: Müller, Katherina last_name: Müller - first_name: Julian full_name: Röhrig, Julian last_name: Röhrig - first_name: Vanessa full_name: Stibitz, Vanessa last_name: Stibitz - first_name: Wilhelm full_name: Urban, Wilhelm last_name: Urban citation: ama: 'Lier S, Brenda M, Cornel P, et al. From the Concept to the Tap - Integrated Water Resources Managment in Northern Namibia. In: Borchardt D, ed. Integrated Water Resources Management: Concept, Research and Implementation. Springer ; 2016:683-717. doi:https://doi.org/10.1007/978-3-319-25071-7_26' apa: 'Lier, S., Brenda, M., Cornel, P., Deffner, J., Felmeden, J., Jokisch, A., Kluge, T., Müller, K., Röhrig, J., Stibitz, V., & Urban, W. (2016). From the Concept to the Tap - Integrated Water Resources Managment in Northern Namibia. In D. Borchardt (Ed.), Integrated Water Resources Management: Concept, Research and Implementation (pp. 683–717). Springer . https://doi.org/10.1007/978-3-319-25071-7_26' bjps: 'Lier S et al. (2016) From the Concept to the Tap - Integrated Water Resources Managment in Northern Namibia. In Borchardt D (ed.), Integrated Water Resources Management: Concept, Research and Implementation. Cham: Springer , pp. 683–717.' chicago: 'Lier, Stephan, Maria Brenda, Peter Cornel, Juta Deffner, Jörg Felmeden, Alexander Jokisch, Thomas Kluge, et al. “From the Concept to the Tap - Integrated Water Resources Managment in Northern Namibia.” In Integrated Water Resources Management: Concept, Research and Implementation, edited by Dietrich Borchardt, 683–717. Cham: Springer , 2016. https://doi.org/10.1007/978-3-319-25071-7_26.' chicago-de: 'Lier, Stephan, Maria Brenda, Peter Cornel, Juta Deffner, Jörg Felmeden, Alexander Jokisch, Thomas Kluge, u. a. 2016. From the Concept to the Tap - Integrated Water Resources Managment in Northern Namibia. In: Integrated Water Resources Management: Concept, Research and Implementation, hg. von Dietrich Borchardt, 683–717. Cham: Springer . doi:https://doi.org/10.1007/978-3-319-25071-7_26, .' din1505-2-1: 'Lier, Stephan ; Brenda, Maria ; Cornel, Peter ; Deffner, Juta ; Felmeden, Jörg ; Jokisch, Alexander ; Kluge, Thomas ; Müller, Katherina ; u. a.: From the Concept to the Tap - Integrated Water Resources Managment in Northern Namibia. In: Borchardt, D. (Hrsg.): Integrated Water Resources Management: Concept, Research and Implementation. Cham : Springer , 2016, S. 683–717' havard: 'S. Lier, M. Brenda, P. Cornel, J. Deffner, J. Felmeden, A. Jokisch, T. Kluge, K. Müller, J. Röhrig, V. Stibitz, W. Urban, From the Concept to the Tap - Integrated Water Resources Managment in Northern Namibia, in: D. Borchardt (Ed.), Integrated Water Resources Management: Concept, Research and Implementation, Springer , Cham, 2016: pp. 683–717.' ieee: 'S. Lier et al., “From the Concept to the Tap - Integrated Water Resources Managment in Northern Namibia,” in Integrated Water Resources Management: Concept, Research and Implementation, D. Borchardt, Ed. Cham: Springer , 2016, pp. 683–717. doi: https://doi.org/10.1007/978-3-319-25071-7_26.' mla: 'Lier, Stephan, et al. “From the Concept to the Tap - Integrated Water Resources Managment in Northern Namibia.” Integrated Water Resources Management: Concept, Research and Implementation, edited by Dietrich Borchardt, Springer , 2016, pp. 683–717, https://doi.org/10.1007/978-3-319-25071-7_26.' short: 'S. Lier, M. Brenda, P. Cornel, J. Deffner, J. Felmeden, A. Jokisch, T. Kluge, K. Müller, J. Röhrig, V. Stibitz, W. Urban, in: D. Borchardt (Ed.), Integrated Water Resources Management: Concept, Research and Implementation, Springer , Cham, 2016, pp. 683–717.' ufg: 'Lier, Stephan u. a.: From the Concept to the Tap - Integrated Water Resources Managment in Northern Namibia, in: Borchardt, Dietrich (Hg.): Integrated Water Resources Management: Concept, Research and Implementation, Cham 2016,  S. 683–717.' van: 'Lier S, Brenda M, Cornel P, Deffner J, Felmeden J, Jokisch A, et al. From the Concept to the Tap - Integrated Water Resources Managment in Northern Namibia. In: Borchardt D, editor. Integrated Water Resources Management: Concept, Research and Implementation. Cham: Springer ; 2016. p. 683–717.' date_created: 2023-06-30T06:30:28Z date_updated: 2023-07-12T09:23:15Z department: - _id: DEP3021 doi: https://doi.org/10.1007/978-3-319-25071-7_26 editor: - first_name: Dietrich full_name: Borchardt, Dietrich last_name: Borchardt extern: '1' keyword: - Multi-resource-mix - Rainwater and floodwater harvesting - Solar-coupled groundwater desalination - Sanitation and water reuse - Transdisciplinarity language: - iso: eng page: 683–717 place: Cham publication: 'Integrated Water Resources Management: Concept, Research and Implementation' publication_identifier: eisbn: - 978-3-319-25071-7 isbn: - 978-3-319-79729-8 - 978-3-319-25069-4 publication_status: published publisher: 'Springer ' status: public title: From the Concept to the Tap - Integrated Water Resources Managment in Northern Namibia type: book_chapter user_id: '83781' year: '2016' ... --- _id: '597' abstract: - lang: eng text: "This paper is aimed to discuss current research using data mining techniques and industry statistics in production environments. The general research approach is based on the idea of using data mining processes and techniques of industry statistics to find rare and hidden patterns behind failures of complex components. A case study will be applied to illustrate how the technique is carried out and where the limits of this approach occur. The case study deals with a component supplier of printing machines, which received an increasing number of client complaints, all related to one distinct problem. The observed failures seem to occur only among clients with very high quality standards. The affected component undergoes a very complex production process with several steps in different departments. Every single production unit records data information from multiple process variables and at different points in time. In the beginning there was no understanding of the failure causes in production at all. Therefore a huge amount of production data had to be analyzed to find the pattern that discloses the failure.\r\nThe data mining process starts with a first step in which the given data sets are prepared and then cleaned. Followed up by building a prediction model. The aim is to detect the root causes for failures and to predict potential failures in affected components. This paper shows how to use data mining to get the answer on pressing production failures.\r\n" author: - first_name: Eva full_name: Scheideler, Eva id: '61522' last_name: Scheideler - first_name: Andrea full_name: Ahlemeyer-Stubbe, Andrea last_name: Ahlemeyer-Stubbe citation: ama: 'Scheideler E, Ahlemeyer-Stubbe A. Data Mining: A Potential Detector to Find Failure in Complex Components. In: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy. Hochschule Ostwestfalen-Lippe; 2015:163-174.' apa: 'Scheideler, E., & Ahlemeyer-Stubbe, A. (2015). Data Mining: A Potential Detector to Find Failure in Complex Components. In E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe (Eds.), Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy (Issue 1, pp. 163–174). Hochschule Ostwestfalen-Lippe.' bjps: 'Scheideler E and Ahlemeyer-Stubbe A (2015) Data Mining: A Potential Detector to Find Failure in Complex Components. In Padoano E et al. (eds), Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy. Lemgo: Hochschule Ostwestfalen-Lippe, pp. 163–174.' chicago: 'Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Data Mining: A Potential Detector to Find Failure in Complex Components.” In Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy, edited by Elio Padoano, Franz-Josef Villmer, Department of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, 163–74. Lemgo: Hochschule Ostwestfalen-Lippe, 2015.' chicago-de: 'Scheideler, Eva und Andrea Ahlemeyer-Stubbe. 2015. Data Mining: A Potential Detector to Find Failure in Complex Components. In: Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy, hg. von Elio Padoano, Franz-Josef Villmer, Department of Production Engineering and Management, und Hochschule Ostwestfalen-Lippe, 163–174. Lemgo: Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Scheideler, Eva ; Ahlemeyer-Stubbe, Andrea: Data Mining: A Potential Detector to Find Failure in Complex Components. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management ; Hochschule Ostwestfalen-Lippe (Hrsg.): Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy. Lemgo : Hochschule Ostwestfalen-Lippe, 2015, S. 163–174' havard: 'E. Scheideler, A. Ahlemeyer-Stubbe, Data Mining: A Potential Detector to Find Failure in Complex Components, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy, Hochschule Ostwestfalen-Lippe, Lemgo, 2015: pp. 163–174.' ieee: 'E. Scheideler and A. Ahlemeyer-Stubbe, “Data Mining: A Potential Detector to Find Failure in Complex Components,” in Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy, Trieste, Italy, 2015, no. 1, pp. 163–174.' mla: 'Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Data Mining: A Potential Detector to Find Failure in Complex Components.” Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy, edited by Elio Padoano et al., no. 1, Hochschule Ostwestfalen-Lippe, 2015, pp. 163–74.' short: 'E. Scheideler, A. Ahlemeyer-Stubbe, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy, Hochschule Ostwestfalen-Lippe, Lemgo, 2015, pp. 163–174.' ufg: 'Scheideler, Eva/Ahlemeyer-Stubbe, Andrea: Data Mining: A Potential Detector to Find Failure in Complex Components, in: Padoano, Elio u. a. (Hgg.): Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy, Lemgo 2015,  S. 163–174.' van: 'Scheideler E, Ahlemeyer-Stubbe A. Data Mining: A Potential Detector to Find Failure in Complex Components. In: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, editors. Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy. Lemgo: Hochschule Ostwestfalen-Lippe; 2015. p. 163–74.' conference: end_date: 2015-10-02 location: Trieste, Italy name: '5th International Conference "Production Engineering and Management" ' start_date: 2015-10-01 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-19T07:15:57Z date_updated: 2024-03-22T13:12:47Z department: - _id: DEP7000 - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer issue: '1' keyword: - Data mining - production failure - multi-variant analysis - multivariate process control - predictive modelling - case study language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf oa: '1' page: 163-174 place: Lemgo publication: 'Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy' publication_identifier: isbn: - 978-3-941645-11-0 publication_status: published publisher: Hochschule Ostwestfalen-Lippe related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf status: public title: 'Data Mining: A Potential Detector to Find Failure in Complex Components' type: conference user_id: '83781' year: '2015' ... --- _id: '4371' abstract: - lang: eng text: 'A major challenge in modern data-centric medicine is the increasing amount of time-dependent data, which requires efficient user-friendly solutions for dealing with such data. To create an effective and efficient knowledge discovery process, it is important to support common data manipulation tasks by creating quick, responsive and intuitive interaction methods. In this paper we describe some methods for interactive longitudinal data visualization with focus on the usage of mobile multi-touch devices as interaction medium, based on our design and development experiences. We argue that when it comes to longitudinal data this device category offers remarkable additional interaction benefits compared to standard point-and-click desktop computer devices. An important advantage of multi-touch devices arises when interacting with particularly large longitudinal data sets: Complex, coupled interactions such as zooming into a region and scrolling around almost simultaneously is more easily achieved with the possibilities of a multi-touch device than compared to a regular mouse-based interaction device.' author: - first_name: Andreas full_name: Holzinger, Andreas last_name: Holzinger - first_name: Michael full_name: Schwarz, Michael last_name: Schwarz - first_name: Bernhard full_name: Ofner, Bernhard last_name: Ofner - first_name: Fleur full_name: Jeanquartier, Fleur last_name: Jeanquartier - first_name: Andre full_name: Calero-Valdez, Andre last_name: Calero-Valdez - first_name: Carsten full_name: Röcker, Carsten id: '61525' last_name: Röcker - first_name: Martina full_name: Ziefle, Martina last_name: Ziefle citation: ama: 'Holzinger A, Schwarz M, Ofner B, et al. Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers. In: Teufel S, Min TA, You I, Weippl E, eds. Availability, Reliability, and Security in Information Systems . Vol 8708. Lecture Notes in Computer Science. Cham: Springer; 2014:124-137. doi:10.1007/978-3-319-10975-6_9' apa: 'Holzinger, A., Schwarz, M., Ofner, B., Jeanquartier, F., Calero-Valdez, A., Röcker, C., & Ziefle, M. (2014). Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers. In S. Teufel, T. A. Min, I. You, & E. Weippl (Eds.), Availability, Reliability, and Security in Information Systems (Vol. 8708, pp. 124–137). Cham: Springer. https://doi.org/10.1007/978-3-319-10975-6_9' bjps: 'Holzinger A et al. (2014) Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers. In Teufel S et al. (eds), Availability, Reliability, and Security in Information Systems , vol. 8708. Cham: Springer, pp. 124–137.' chicago: 'Holzinger, Andreas, Michael Schwarz, Bernhard Ofner, Fleur Jeanquartier, Andre Calero-Valdez, Carsten Röcker, and Martina Ziefle. “Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers.” In Availability, Reliability, and Security in Information Systems , edited by Stephanie Teufel, Tjoa A Min, Ilsun You, and Edgar Weippl, 8708:124–37. Lecture Notes in Computer Science. Cham: Springer, 2014. https://doi.org/10.1007/978-3-319-10975-6_9.' chicago-de: 'Holzinger, Andreas, Michael Schwarz, Bernhard Ofner, Fleur Jeanquartier, Andre Calero-Valdez, Carsten Röcker und Martina Ziefle. 2014. Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers. In: Availability, Reliability, and Security in Information Systems , hg. von Stephanie Teufel, Tjoa A Min, Ilsun You, und Edgar Weippl, 8708:124–137. Lecture Notes in Computer Science. Cham: Springer. doi:10.1007/978-3-319-10975-6_9, .' din1505-2-1: 'Holzinger, Andreas ; Schwarz, Michael ; Ofner, Bernhard ; Jeanquartier, Fleur ; Calero-Valdez, Andre ; Röcker, Carsten ; Ziefle, Martina: Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers. In: Teufel, S. ; Min, T. A. ; You, I. ; Weippl, E. (Hrsg.): Availability, Reliability, and Security in Information Systems , Lecture Notes in Computer Science. Bd. 8708. Cham : Springer, 2014, S. 124–137' havard: 'A. Holzinger, M. Schwarz, B. Ofner, F. Jeanquartier, A. Calero-Valdez, C. Röcker, M. Ziefle, Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers, in: S. Teufel, T.A. Min, I. You, E. Weippl (Eds.), Availability, Reliability, and Security in Information Systems , Springer, Cham, 2014: pp. 124–137.' ieee: A. Holzinger et al., “Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers,” in Availability, Reliability, and Security in Information Systems , Fribourg, Switzerland, 2014, vol. 8708, pp. 124–137. mla: Holzinger, Andreas, et al. “Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers.” Availability, Reliability, and Security in Information Systems , edited by Stephanie Teufel et al., vol. 8708, Springer, 2014, pp. 124–37, doi:10.1007/978-3-319-10975-6_9. short: 'A. Holzinger, M. Schwarz, B. Ofner, F. Jeanquartier, A. Calero-Valdez, C. Röcker, M. Ziefle, in: S. Teufel, T.A. Min, I. You, E. Weippl (Eds.), Availability, Reliability, and Security in Information Systems , Springer, Cham, 2014, pp. 124–137.' ufg: 'Holzinger, Andreas et. al. (2014): Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers, in: Stephanie Teufel et. al. (Hgg.): Availability, Reliability, and Security in Information Systems (=Lecture Notes in Computer Science 8708), Cham, S. 124–137.' van: 'Holzinger A, Schwarz M, Ofner B, Jeanquartier F, Calero-Valdez A, Röcker C, et al. Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers. In: Teufel S, Min TA, You I, Weippl E, editors. Availability, Reliability, and Security in Information Systems . Cham: Springer; 2014. p. 124–37. (Lecture Notes in Computer Science; vol. 8708).' conference: end_date: 2014-09-12 location: Fribourg, Switzerland name: 5 International Cross-Domain Conference, CD-ARES 2014 and 4th International Workshop on Security and Cognitive Informatics for Homeland Defense, SeCIHD 2014 start_date: 2014-09-08 date_created: 2021-01-14T10:13:18Z date_updated: 2023-03-15T13:49:52Z department: - _id: DEP5023 doi: 10.1007/978-3-319-10975-6_9 editor: - first_name: 'Stephanie ' full_name: 'Teufel, Stephanie ' last_name: Teufel - first_name: 'Tjoa A ' full_name: 'Min, Tjoa A ' last_name: Min - first_name: 'Ilsun ' full_name: 'You, Ilsun ' last_name: You - first_name: 'Edgar ' full_name: 'Weippl, Edgar ' last_name: Weippl intvolume: ' 8708' keyword: - Data Visualization - Longitudinal Data - Time Series - Multi-Touch - Mobile Computing language: - iso: eng main_file_link: - open_access: '1' oa: '1' page: 124 - 137 place: Cham publication: ' Availability, Reliability, and Security in Information Systems ' publication_identifier: eisbn: - 978-3-319-10975-6 isbn: - 978-3-319-10974-9 publication_status: published publisher: Springer series_title: Lecture Notes in Computer Science status: public title: Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers type: conference user_id: '15514' volume: 8708 year: 2014 ... --- _id: '4377' abstract: - lang: eng text: Within the last years the concept of trust has attracted increased attention in the field of smart home environments. However, little is known about what determines trustworthiness in this context. For this reason the objective was to examine mental models in terms of anthropomorphic perception of smart home environments and its relation to trustworthiness. Two studies (N=36) were carried out in the Future Care Lab, a simulated intelligent home environment. We used the teach-back method to help participants to talk about the smart home environment technology and asked to generate a metaphor of an experienced home-monitoring scenario. Finally, we applied linguistic analysis of responses to detect anthropomorphic characteristics. In general, results demonstrate inspiring metaphors related to the personal assistance system, e.g. "like an airbag…" or "like a family member…", which might be useful for future interface designs and approaches of communication in the context of smart home environments. However, no relation of anthropomorphism and trustworthiness could be found. Therefore, we suggest an anthropomorphic threshold, which should be investigated by using an improved method and trust scale. author: - first_name: Oliver full_name: Sack, Oliver last_name: Sack - first_name: Carsten full_name: Röcker, Carsten id: '61525' last_name: Röcker citation: ama: Sack O, Röcker C. “Like a Family Member Who Takes Care of Me” – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments. International Journal of Virtual Worlds and Human Computer Interaction. 2014;2(1):28-36. doi:10.11159/vwhci.2014.004 apa: Sack, O., & Röcker, C. (2014). “Like a Family Member Who Takes Care of Me” – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments. International Journal of Virtual Worlds and Human Computer Interaction, 2(1), 28–36. https://doi.org/10.11159/vwhci.2014.004 bjps: Sack O and Röcker C (2014) “Like a Family Member Who Takes Care of Me” – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments. International Journal of Virtual Worlds and Human Computer Interaction 2, 28–36. chicago: 'Sack, Oliver, and Carsten Röcker. “‘Like a Family Member Who Takes Care of Me’ – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments.” International Journal of Virtual Worlds and Human Computer Interaction 2, no. 1 (2014): 28–36. https://doi.org/10.11159/vwhci.2014.004.' chicago-de: 'Sack, Oliver und Carsten Röcker. 2014. “Like a Family Member Who Takes Care of Me” – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments. International Journal of Virtual Worlds and Human Computer Interaction 2, Nr. 1: 28–36. doi:10.11159/vwhci.2014.004, .' din1505-2-1: 'Sack, Oliver ; Röcker, Carsten: “Like a Family Member Who Takes Care of Me” – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments. In: International Journal of Virtual Worlds and Human Computer Interaction Bd. 2.   Orléans, ON , Avestia Publishing, International ASET Inc. (2014), Nr. 1, S. 28–36' havard: O. Sack, C. Röcker, “Like a Family Member Who Takes Care of Me” – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments, International Journal of Virtual Worlds and Human Computer Interaction. 2 (2014) 28–36. ieee: O. Sack and C. Röcker, “‘Like a Family Member Who Takes Care of Me’ – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments,” International Journal of Virtual Worlds and Human Computer Interaction, vol. 2, no. 1, pp. 28–36, 2014. mla: Sack, Oliver, and Carsten Röcker. “‘Like a Family Member Who Takes Care of Me’ – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments.” International Journal of Virtual Worlds and Human Computer Interaction, vol. 2, no. 1, Avestia Publishing, International ASET Inc. , 2014, pp. 28–36, doi:10.11159/vwhci.2014.004. short: O. Sack, C. Röcker, International Journal of Virtual Worlds and Human Computer Interaction 2 (2014) 28–36. ufg: 'Sack, Oliver/Röcker, Carsten (2014): “Like a Family Member Who Takes Care of Me” – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments, in: International Journal of Virtual Worlds and Human Computer Interaction 2 (1), S. 28–36.' van: Sack O, Röcker C. “Like a Family Member Who Takes Care of Me” – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments. International Journal of Virtual Worlds and Human Computer Interaction. 2014;2(1):28–36. date_created: 2021-01-14T10:13:27Z date_updated: 2023-03-15T13:49:52Z department: - _id: DEP5023 doi: 10.11159/vwhci.2014.004 extern: '1' intvolume: ' 2' issue: '1' keyword: - Smart environment - e-health - user study - mental model - anthropomorphism - metaphor - technology acceptance - trust - evaluation language: - iso: eng main_file_link: - open_access: '1' oa: '1' page: 28 - 36 place: ' Orléans, ON ' publication: International Journal of Virtual Worlds and Human Computer Interaction publication_identifier: eissn: - 2368-6103 publication_status: published publisher: ' Avestia Publishing, International ASET Inc. ' status: public title: “Like a Family Member Who Takes Care of Me” – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments type: journal_article user_id: '15514' volume: 2 year: 2014 ... --- _id: '4381' abstract: - lang: eng text: This article reports on two user studies exploring the knowledge of end users about technical processes of technology-enhanced home environments, which are often assumed to play an important role for attitudes such as privacy and security. In the first study (n=12 participants between 19-71 years of age), we analyzed user knowledge about technical processes using the teach-back methodology. In the second study, we additionally applied new developed questionnaires and analyzed participants’ data (n=24 participants between 19-76 years of age) regarding relations of user factors, users’ knowledge about technical processes and attitudes such as privacy and security of technology-enhanced environments. In contrast to existing assumptions, the results showed that general structural knowledge about technical processes was not related with attitudes such as privacy and security. Additionally, we found that most participants had only relatively superficial knowledge about technical processes, which was further influenced by age and technology experience. author: - first_name: Oliver full_name: Sack, Oliver last_name: Sack - first_name: Carsten full_name: Röcker, Carsten id: '61525' last_name: Röcker citation: ama: 'Sack O, Röcker C. Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups. Universal Journal of Psychology. 2013;1(2):72-83. doi:10.13189/ujp.2013.010207' apa: 'Sack, O., & Röcker, C. (2013). Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups. Universal Journal of Psychology, 1(2), 72–83. https://doi.org/10.13189/ujp.2013.010207' bjps: 'Sack O and Röcker C (2013) Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups. Universal Journal of Psychology 1, 72–83.' chicago: 'Sack, Oliver, and Carsten Röcker. “Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups.” Universal Journal of Psychology 1, no. 2 (2013): 72–83. https://doi.org/10.13189/ujp.2013.010207.' chicago-de: 'Sack, Oliver und Carsten Röcker. 2013. Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups. Universal Journal of Psychology 1, Nr. 2: 72–83. doi:10.13189/ujp.2013.010207, .' din1505-2-1: 'Sack, Oliver ; Röcker, Carsten: Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups. In: Universal Journal of Psychology Bd. 1.   Alhambra, Calif., Horizion (2013), Nr. 2, S. 72–83' havard: 'O. Sack, C. Röcker, Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups, Universal Journal of Psychology. 1 (2013) 72–83.' ieee: 'O. Sack and C. Röcker, “Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups,” Universal Journal of Psychology, vol. 1, no. 2, pp. 72–83, 2013.' mla: 'Sack, Oliver, and Carsten Röcker. “Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups.” Universal Journal of Psychology, vol. 1, no. 2, Horizion , 2013, pp. 72–83, doi:10.13189/ujp.2013.010207.' short: O. Sack, C. Röcker, Universal Journal of Psychology 1 (2013) 72–83. ufg: 'Sack, Oliver/Röcker, Carsten (2013): Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups, in: Universal Journal of Psychology 1 (2), S. 72–83.' van: 'Sack O, Röcker C. Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups. Universal Journal of Psychology. 2013;1(2):72–83.' date_created: 2021-01-15T10:49:18Z date_updated: 2023-03-15T13:49:52Z department: - _id: DEP5023 doi: 10.13189/ujp.2013.010207 extern: '1' intvolume: ' 1' issue: '2' keyword: - Technology-enhanced Environment - Ambient Assisted Living - Mental Model - Teach Back - Privacy - Security language: - iso: eng main_file_link: - open_access: '1' oa: '1' page: 72 - 83 place: ' Alhambra, Calif.' publication: Universal Journal of Psychology publication_identifier: eissn: - '2332-3485 ' isbn: - 2332-3477 publication_status: published publisher: 'Horizion ' status: public title: 'Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups' type: journal_article user_id: '15514' volume: 1 year: 2013 ... --- _id: '12249' abstract: - lang: eng text: We investigated the combined effects of thermal pollution from a nuclear power plant (NPP) and regional climate warming on the thermal regime of a lake. For this purpose, we used the lake model FLake and analyzed 50 years of temperature data from Lake Stechlin, Germany, which served as the cooling water reservoir for the Rheinsberg NPP from 1966 until 1990. Both modeling and statistical data analysis revealed a strong influence of the NPP cooling water discharge on the lake water temperatures and the vertical stability of the water column. A remarkable effect of thermal pollution consisted of strong vertical mixing in winter produced by the discharge of warm water into the lake when ambient water temperatures were below 4 °C. This effect caused a significant increase in the deep hypolimnion temperatures and a corresponding decrease of the vertical stability in the summer. In turn, climate warming had the opposite effect on the summer stability by increasing lake surface temperatures. Both the thermal pollution and climate change increased the duration of the summer stratification period. Our results suggest that industrial thermal pollution in temperate lakes during winter is stored in the deep water column until the next winter, whereas heat added in the summer dissipates relatively rapidly into the atmosphere. Accordingly, the winter thermal pollution could have a long-lasting effect on the lake ecology by affecting benthic biogeochemical processes. author: - first_name: Georgiy full_name: Kirillin, Georgiy last_name: Kirillin - first_name: Tom full_name: Shatwell, Tom id: '86424' last_name: Shatwell orcid: 0000-0002-4520-7916 - first_name: Peter full_name: Kasprzak, Peter last_name: Kasprzak citation: ama: Kirillin G, Shatwell T, Kasprzak P. Consequences of thermal pollution from a nuclear plant on lake temperature and mixing regime. Journal of Hydrology. 2013;496(7):47-56. doi:10.1016/j.jhydrol.2013.05.023 apa: Kirillin, G., Shatwell, T., & Kasprzak, P. (2013). Consequences of thermal pollution from a nuclear plant on lake temperature and mixing regime. Journal of Hydrology, 496(7), 47–56. https://doi.org/10.1016/j.jhydrol.2013.05.023 bjps: Kirillin G, Shatwell T and Kasprzak P (2013) Consequences of Thermal Pollution from a Nuclear Plant on Lake Temperature and Mixing Regime. Journal of Hydrology 496, 47–56. chicago: 'Kirillin, Georgiy, Tom Shatwell, and Peter Kasprzak. “Consequences of Thermal Pollution from a Nuclear Plant on Lake Temperature and Mixing Regime.” Journal of Hydrology 496, no. 7 (2013): 47–56. https://doi.org/10.1016/j.jhydrol.2013.05.023.' chicago-de: 'Kirillin, Georgiy, Tom Shatwell und Peter Kasprzak. 2013. Consequences of thermal pollution from a nuclear plant on lake temperature and mixing regime. Journal of Hydrology 496, Nr. 7: 47–56. doi:10.1016/j.jhydrol.2013.05.023, .' din1505-2-1: 'Kirillin, Georgiy ; Shatwell, Tom ; Kasprzak, Peter: Consequences of thermal pollution from a nuclear plant on lake temperature and mixing regime. In: Journal of Hydrology Bd. 496. Amsterdam, Elsevier BV (2013), Nr. 7, S. 47–56' havard: G. Kirillin, T. Shatwell, P. Kasprzak, Consequences of thermal pollution from a nuclear plant on lake temperature and mixing regime, Journal of Hydrology. 496 (2013) 47–56. ieee: 'G. Kirillin, T. Shatwell, and P. Kasprzak, “Consequences of thermal pollution from a nuclear plant on lake temperature and mixing regime,” Journal of Hydrology, vol. 496, no. 7, pp. 47–56, 2013, doi: 10.1016/j.jhydrol.2013.05.023.' mla: Kirillin, Georgiy, et al. “Consequences of Thermal Pollution from a Nuclear Plant on Lake Temperature and Mixing Regime.” Journal of Hydrology, vol. 496, no. 7, 2013, pp. 47–56, https://doi.org/10.1016/j.jhydrol.2013.05.023. short: G. Kirillin, T. Shatwell, P. Kasprzak, Journal of Hydrology 496 (2013) 47–56. ufg: 'Kirillin, Georgiy/Shatwell, Tom/Kasprzak, Peter: Consequences of thermal pollution from a nuclear plant on lake temperature and mixing regime, in: Journal of Hydrology 496 (2013), H. 7,  S. 47–56.' van: Kirillin G, Shatwell T, Kasprzak P. Consequences of thermal pollution from a nuclear plant on lake temperature and mixing regime. Journal of Hydrology. 2013;496(7):47–56. date_created: 2024-12-08T20:44:14Z date_updated: 2024-12-09T09:02:37Z department: - _id: DEP8022 doi: 10.1016/j.jhydrol.2013.05.023 extern: '1' intvolume: ' 496' issue: '7' keyword: - Industrial thermal pollution - Global warming - Lake stratification - FLake model language: - iso: eng main_file_link: - url: https://doi.org/10.1016/j.jhydrol.2013.05.023 page: 47-56 place: Amsterdam publication: Journal of Hydrology publication_identifier: eissn: - 1879-2707 issn: - 0022-1694 publication_status: published publisher: Elsevier BV quality_controlled: '1' status: public title: Consequences of thermal pollution from a nuclear plant on lake temperature and mixing regime type: scientific_journal_article user_id: '83781' volume: 496 year: '2013' ... --- _id: '1436' author: - first_name: Fabian full_name: Denninger, Fabian last_name: Denninger citation: ama: 'Denninger F. Konzeption und Entwicklung eines multimedialen Informationssystems auf Basis von Multitouch-Technologie am Beispiel der interaktiven Flash-Anwendung “Ökotouch”. Lemgo: Hochschule Ostwestfalen-Lippe; 2008.' apa: 'Denninger, F. (2008). Konzeption und Entwicklung eines multimedialen Informationssystems auf Basis von Multitouch-Technologie am Beispiel der interaktiven Flash-Anwendung “Ökotouch”. Lemgo: Hochschule Ostwestfalen-Lippe.' bjps: 'Denninger F (2008) Konzeption und Entwicklung eines multimedialen Informationssystems auf Basis von Multitouch-Technologie am Beispiel der interaktiven Flash-Anwendung ‘Ökotouch’. Lemgo: Hochschule Ostwestfalen-Lippe.' chicago: 'Denninger, Fabian. Konzeption und Entwicklung eines multimedialen Informationssystems auf Basis von Multitouch-Technologie am Beispiel der interaktiven Flash-Anwendung “Ökotouch”. Lemgo: Hochschule Ostwestfalen-Lippe, 2008.' chicago-de: 'Denninger, Fabian. 2008. Konzeption und Entwicklung eines multimedialen Informationssystems auf Basis von Multitouch-Technologie am Beispiel der interaktiven Flash-Anwendung „Ökotouch“. Lemgo: Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Denninger, Fabian: Konzeption und Entwicklung eines multimedialen Informationssystems auf Basis von Multitouch-Technologie am Beispiel der interaktiven Flash-Anwendung „Ökotouch“. Lemgo : Hochschule Ostwestfalen-Lippe, 2008' havard: F. Denninger, Konzeption und Entwicklung eines multimedialen Informationssystems auf Basis von Multitouch-Technologie am Beispiel der interaktiven Flash-Anwendung “Ökotouch”., Hochschule Ostwestfalen-Lippe, Lemgo, 2008. ieee: 'F. Denninger, Konzeption und Entwicklung eines multimedialen Informationssystems auf Basis von Multitouch-Technologie am Beispiel der interaktiven Flash-Anwendung “Ökotouch”. Lemgo: Hochschule Ostwestfalen-Lippe, 2008.' mla: Denninger, Fabian. Konzeption und Entwicklung eines multimedialen Informationssystems auf Basis von Multitouch-Technologie am Beispiel der interaktiven Flash-Anwendung “Ökotouch”. Hochschule Ostwestfalen-Lippe, 2008. short: F. Denninger, Konzeption und Entwicklung eines multimedialen Informationssystems auf Basis von Multitouch-Technologie am Beispiel der interaktiven Flash-Anwendung “Ökotouch”., Hochschule Ostwestfalen-Lippe, Lemgo, 2008. ufg: 'Denninger, Fabian (2008): Konzeption und Entwicklung eines multimedialen Informationssystems auf Basis von Multitouch-Technologie am Beispiel der interaktiven Flash-Anwendung „Ökotouch“., Lemgo.' van: 'Denninger F. Konzeption und Entwicklung eines multimedialen Informationssystems auf Basis von Multitouch-Technologie am Beispiel der interaktiven Flash-Anwendung “Ökotouch”. Lemgo: Hochschule Ostwestfalen-Lippe; 2008. 134 p.' date_created: 2019-06-12T09:18:56Z date_updated: 2023-03-15T13:49:36Z ddc: - '004' department: - _id: DEP2001 keyword: - Multi-Touch - Multitouch Multitouch language: - iso: ger page: '134' place: Lemgo publication_status: published publisher: Hochschule Ostwestfalen-Lippe status: public supervisor: - first_name: Guido full_name: Falkemeier, Guido id: '29084' last_name: Falkemeier title: Konzeption und Entwicklung eines multimedialen Informationssystems auf Basis von Multitouch-Technologie am Beispiel der interaktiven Flash-Anwendung "Ökotouch". type: bachelor_thesis user_id: '45673' year: 2008 ...