--- _id: '12207' abstract: - lang: eng text: Lakes represent a vital source of freshwater, accounting for 87% of the Earth’s accessible surface freshwater resources and providing a range of ecosystem services, including water for human consumption. As climate change continues to unfold, understanding the potential evaporative water losses from lakes becomes crucial for effective water management strategies. Here we investigate the impacts of climate change on the evaporation rates of 23 European lakes and reservoirs of varying size during the warm season (July–September). To assess the evaporation trends, we employ a 12-member ensemble of model projections, utilizing three one-dimensional process-based lake models. These lake models were driven by bias-corrected climate simulations from four General Circulation Models (GCMs), considering both a historical (1970–2005) and future (2006–2099) period. Our findings reveal a consistent projection of increased warm-season evaporation across all lakes this century, though the magnitude varies depending on specific factors. By the end of this century (2070–2099), we estimate a 21%, 30% and 42% average increase in evaporation rates in the studied European lakes under RCP (Representative Concentration Pathway) 2.6, 6.0 and 8.5, respectively. Moreover, future projections of the relationship between precipitation (P) and evaporation (E) in the studied lakes, suggest that P-E will decrease this century, likely leading to a deficit in the availability of surface water. The projected increases in evaporation rates underscore the significance of adapting strategic management approaches for European lakes to cope with the far-reaching consequences of climate change. article_number: '173' author: - first_name: Sofia full_name: La Fuente, Sofia last_name: La Fuente - first_name: Eleanor full_name: Jennings, Eleanor last_name: Jennings - first_name: John D. full_name: Lenters, John D. last_name: Lenters - first_name: Piet full_name: Verburg, Piet last_name: Verburg - first_name: Georgiy full_name: Kirillin, Georgiy last_name: Kirillin - first_name: Tom full_name: Shatwell, Tom id: '86424' last_name: Shatwell orcid: 0000-0002-4520-7916 - first_name: Raoul-Marie full_name: Couture, Raoul-Marie last_name: Couture - first_name: Marianne full_name: Côté, Marianne last_name: Côté - first_name: C. Love Råman full_name: Vinnå, C. Love Råman last_name: Vinnå - first_name: R. Iestyn full_name: Woolway, R. Iestyn last_name: Woolway citation: ama: La Fuente S, Jennings E, Lenters JD, et al. Increasing warm-season evaporation rates across European lakes under climate change. Climatic Change. 2024;177(12). doi:10.1007/s10584-024-03830-2 apa: La Fuente, S., Jennings, E., Lenters, J. D., Verburg, P., Kirillin, G., Shatwell, T., Couture, R.-M., Côté, M., Vinnå, C. L. R., & Woolway, R. I. (2024). Increasing warm-season evaporation rates across European lakes under climate change. Climatic Change, 177(12), Article 173. https://doi.org/10.1007/s10584-024-03830-2 bjps: La Fuente S et al. (2024) Increasing Warm-Season Evaporation Rates across European Lakes under Climate Change. Climatic Change 177. chicago: La Fuente, Sofia, Eleanor Jennings, John D. Lenters, Piet Verburg, Georgiy Kirillin, Tom Shatwell, Raoul-Marie Couture, Marianne Côté, C. Love Råman Vinnå, and R. Iestyn Woolway. “Increasing Warm-Season Evaporation Rates across European Lakes under Climate Change.” Climatic Change 177, no. 12 (2024). https://doi.org/10.1007/s10584-024-03830-2. chicago-de: La Fuente, Sofia, Eleanor Jennings, John D. Lenters, Piet Verburg, Georgiy Kirillin, Tom Shatwell, Raoul-Marie Couture, Marianne Côté, C. Love Råman Vinnå und R. Iestyn Woolway. 2024. Increasing warm-season evaporation rates across European lakes under climate change. Climatic Change 177, Nr. 12. doi:10.1007/s10584-024-03830-2, . din1505-2-1: 'La Fuente, Sofia ; Jennings, Eleanor ; Lenters, John D. ; Verburg, Piet ; Kirillin, Georgiy ; Shatwell, Tom ; Couture, Raoul-Marie ; Côté, Marianne ; u. a.: Increasing warm-season evaporation rates across European lakes under climate change. In: Climatic Change Bd. 177. Dordrecht [u.a.] , Springer (2024), Nr. 12' havard: S. La Fuente, E. Jennings, J.D. Lenters, P. Verburg, G. Kirillin, T. Shatwell, R.-M. Couture, M. Côté, C.L.R. Vinnå, R.I. Woolway, Increasing warm-season evaporation rates across European lakes under climate change, Climatic Change. 177 (2024). ieee: 'S. La Fuente et al., “Increasing warm-season evaporation rates across European lakes under climate change,” Climatic Change, vol. 177, no. 12, Art. no. 173, 2024, doi: 10.1007/s10584-024-03830-2.' mla: La Fuente, Sofia, et al. “Increasing Warm-Season Evaporation Rates across European Lakes under Climate Change.” Climatic Change, vol. 177, no. 12, 173, 2024, https://doi.org/10.1007/s10584-024-03830-2. short: S. La Fuente, E. Jennings, J.D. Lenters, P. Verburg, G. Kirillin, T. Shatwell, R.-M. Couture, M. Côté, C.L.R. Vinnå, R.I. Woolway, Climatic Change 177 (2024). ufg: 'La Fuente, Sofia u. a.: Increasing warm-season evaporation rates across European lakes under climate change, in: Climatic Change 177 (2024), H. 12.' van: La Fuente S, Jennings E, Lenters JD, Verburg P, Kirillin G, Shatwell T, et al. Increasing warm-season evaporation rates across European lakes under climate change. Climatic Change. 2024;177(12). date_created: 2024-12-08T18:51:13Z date_updated: 2025-06-25T13:08:30Z department: - _id: DEP8022 doi: 10.1007/s10584-024-03830-2 external_id: isi: - '001365861900001' intvolume: ' 177' isi: '1' issue: '12' keyword: - Multi-model - Water availability - Europe - Ensemble - Lake evaporation - Latent heat flux language: - iso: eng main_file_link: - open_access: '1' url: https://doi.org/10.1007/s10584-024-03830-2 oa: '1' place: 'Dordrecht [u.a.] ' publication: Climatic Change publication_identifier: eissn: - 1573-1480 issn: - 0165-0009 publication_status: published publisher: Springer quality_controlled: '1' status: public title: Increasing warm-season evaporation rates across European lakes under climate change type: scientific_journal_article user_id: '83781' volume: 177 year: '2024' ... --- _id: '12855' abstract: - lang: eng text: Global warming is shifting the thermal dynamics of lakes, with resulting climatic variability heavily affecting their mixing dynamics. We present a dual ensemble workflow coupling climate models with lake models. We used a large set of simulations across multiple domains, multi‐scenario, and multi GCM‐ RCM combinations from CORDEX data. We forced a set of multiple hydrodynamic lake models by these multiple climate simulations to explore climate change impacts on lakes. We also quantified the contributions from the different models to the overall uncertainty. We employed this workflow to investigate the effects of climate change on Lake Sevan (Armenia). We predicted for the end of the 21st century, under RCP 8.5, a sharp increase in surface temperature and substantial bottom warming , longer stratification periods (+55 days) and disappearance of ice cover leading to a shift in mixing regime. Increased insufficient cooling during warmer winters points to the vulnerability of Lake Sevan to climate change. Our workflow leverages the strengths of multiple models at several levels of the model chain to provide a more robust projection and at the same time a better uncertainty estimate that accounts for the contributions of the different model levels to overall uncertainty. Although for specific variables, for example, summer bottom temperature, single lake models may perform better, the full ensemble provides a robust estimate of thermal dynamics that has a high transferability so that our workflow can be a blueprint for climate impact studies in other systems. author: - first_name: Muhammed full_name: Shikhani, Muhammed last_name: Shikhani - first_name: Johannes full_name: Feldbauer, Johannes last_name: Feldbauer - first_name: Robert full_name: Ladwig, Robert last_name: Ladwig - first_name: Daniel full_name: Mercado‐Bettín, Daniel last_name: Mercado‐Bettín - first_name: Tadhg N. full_name: Moore, Tadhg N. last_name: Moore - first_name: Artur full_name: Gevorgyan, Artur last_name: Gevorgyan - first_name: Amalya full_name: Misakyan, Amalya last_name: Misakyan - first_name: Chenxi full_name: Mi, Chenxi last_name: Mi - first_name: Martin full_name: Schultze, Martin last_name: Schultze - first_name: Bertram full_name: Boehrer, Bertram last_name: Boehrer - first_name: Tom full_name: Shatwell, Tom id: '86424' last_name: Shatwell orcid: 0000-0002-4520-7916 - first_name: Klemens full_name: Barfus, Klemens last_name: Barfus - first_name: Karsten full_name: Rinke, Karsten last_name: Rinke citation: ama: 'Shikhani M, Feldbauer J, Ladwig R, et al. Combining a Multi‐Lake Model Ensemble and a Multi‐Domain CORDEX Climate Data Ensemble for Assessing Climate Change Impacts on Lake Sevan. Water resources research : an AGU journal. 2024;60(11). doi:10.1029/2023wr036511' apa: 'Shikhani, M., Feldbauer, J., Ladwig, R., Mercado‐Bettín, D., Moore, T. N., Gevorgyan, A., Misakyan, A., Mi, C., Schultze, M., Boehrer, B., Shatwell, T., Barfus, K., & Rinke, K. (2024). Combining a Multi‐Lake Model Ensemble and a Multi‐Domain CORDEX Climate Data Ensemble for Assessing Climate Change Impacts on Lake Sevan. Water Resources Research : An AGU Journal, 60(11). https://doi.org/10.1029/2023wr036511' bjps: 'Shikhani M et al. (2024) Combining a Multi‐Lake Model Ensemble and a Multi‐Domain CORDEX Climate Data Ensemble for Assessing Climate Change Impacts on Lake Sevan. Water resources research : an AGU journal 60.' chicago: 'Shikhani, Muhammed, Johannes Feldbauer, Robert Ladwig, Daniel Mercado‐Bettín, Tadhg N. Moore, Artur Gevorgyan, Amalya Misakyan, et al. “Combining a Multi‐Lake Model Ensemble and a Multi‐Domain CORDEX Climate Data Ensemble for Assessing Climate Change Impacts on Lake Sevan.” Water Resources Research : An AGU Journal 60, no. 11 (2024). https://doi.org/10.1029/2023wr036511.' chicago-de: 'Shikhani, Muhammed, Johannes Feldbauer, Robert Ladwig, Daniel Mercado‐Bettín, Tadhg N. Moore, Artur Gevorgyan, Amalya Misakyan, u. a. 2024. Combining a Multi‐Lake Model Ensemble and a Multi‐Domain CORDEX Climate Data Ensemble for Assessing Climate Change Impacts on Lake Sevan. Water resources research : an AGU journal 60, Nr. 11. doi:10.1029/2023wr036511, .' din1505-2-1: 'Shikhani, Muhammed ; Feldbauer, Johannes ; Ladwig, Robert ; Mercado‐Bettín, Daniel ; Moore, Tadhg N. ; Gevorgyan, Artur ; Misakyan, Amalya ; Mi, Chenxi ; u. a.: Combining a Multi‐Lake Model Ensemble and a Multi‐Domain CORDEX Climate Data Ensemble for Assessing Climate Change Impacts on Lake Sevan. In: Water resources research : an AGU journal Bd. 60. New York, NY, American Geophysical Union (AGU) (2024), Nr. 11' havard: 'M. Shikhani, J. Feldbauer, R. Ladwig, D. Mercado‐Bettín, T.N. Moore, A. Gevorgyan, A. Misakyan, C. Mi, M. Schultze, B. Boehrer, T. Shatwell, K. Barfus, K. Rinke, Combining a Multi‐Lake Model Ensemble and a Multi‐Domain CORDEX Climate Data Ensemble for Assessing Climate Change Impacts on Lake Sevan, Water Resources Research : An AGU Journal. 60 (2024).' ieee: 'M. Shikhani et al., “Combining a Multi‐Lake Model Ensemble and a Multi‐Domain CORDEX Climate Data Ensemble for Assessing Climate Change Impacts on Lake Sevan,” Water resources research : an AGU journal, vol. 60, no. 11, 2024, doi: 10.1029/2023wr036511.' mla: 'Shikhani, Muhammed, et al. “Combining a Multi‐Lake Model Ensemble and a Multi‐Domain CORDEX Climate Data Ensemble for Assessing Climate Change Impacts on Lake Sevan.” Water Resources Research : An AGU Journal, vol. 60, no. 11, 2024, https://doi.org/10.1029/2023wr036511.' short: 'M. Shikhani, J. Feldbauer, R. Ladwig, D. Mercado‐Bettín, T.N. Moore, A. Gevorgyan, A. Misakyan, C. Mi, M. Schultze, B. Boehrer, T. Shatwell, K. Barfus, K. Rinke, Water Resources Research : An AGU Journal 60 (2024).' ufg: 'Shikhani, Muhammed u. a.: Combining a Multi‐Lake Model Ensemble and a Multi‐Domain CORDEX Climate Data Ensemble for Assessing Climate Change Impacts on Lake Sevan, in: Water resources research : an AGU journal 60 (2024), H. 11.' van: 'Shikhani M, Feldbauer J, Ladwig R, Mercado‐Bettín D, Moore TN, Gevorgyan A, et al. Combining a Multi‐Lake Model Ensemble and a Multi‐Domain CORDEX Climate Data Ensemble for Assessing Climate Change Impacts on Lake Sevan. Water resources research : an AGU journal. 2024;60(11).' date_created: 2025-04-24T06:41:06Z date_updated: 2025-06-25T13:09:00Z department: - _id: DEP8000 - _id: DEP8022 doi: 10.1029/2023wr036511 external_id: isi: - '001370328800001' pmid: - '39582854' intvolume: ' 60' isi: '1' issue: '11' keyword: - multi model ensemble (MME) - CORDEX - LakeEnsemblR - lake modeling - climate change impacts - variance decomposition language: - iso: eng place: New York, NY pmid: '1' publication: 'Water resources research : an AGU journal' publication_identifier: eissn: - 1944-7973 issn: - 0043-1397 publication_status: published publisher: American Geophysical Union (AGU) quality_controlled: '1' status: public title: Combining a Multi‐Lake Model Ensemble and a Multi‐Domain CORDEX Climate Data Ensemble for Assessing Climate Change Impacts on Lake Sevan type: scientific_journal_article user_id: '83781' volume: 60 year: '2024' ... --- _id: '10015' abstract: - lang: ger text: Die operative Fertigungsplanung für die Produktions¬bereiche von Werkstätten für behinderte Menschen steht vor der Herausforderung, die Kompetenzen und die individuellen Verhaltensweisen der Personen mit Unterstützungsbedarf bei einer gleichzeitigen Erfüllung der wirtschaftlichen Vorgaben angemessen zu berücksichtigen. Der vorliegende Beitrag beschreibt daher einen simulationsgestützten Ansatz zur Entwicklung von Fertigungsplänen. Hierzu erfolgt eine Allokation von Aufgaben zu Personen mit Unterstützungsbedarf unter Berücksichtigung der Funktionen von Assistenzsystemen in der Fertigung sowie einer zu erreichenden Lernwirksamkeit einer Aufgabenbearbeitung. Der realisierte Algorithmus wird anhand eines Planungsproblems für die Zielgrößen Wirtschaftlichkeit und Lernförderlichkeit verifiziert. author: - first_name: Jan-Phillip full_name: Herrmann, Jan-Phillip id: '75846' last_name: Herrmann - first_name: Sven full_name: Tackenberg, Sven id: '71470' last_name: Tackenberg - first_name: Sönke full_name: Duckwitz, Sönke last_name: Duckwitz citation: ama: Herrmann JP, Tackenberg S, Duckwitz S. Konzept für die operative Fertigungsplanung unter Berücksichtigung der Kompetenzen von Personen mit Unterstützungsbedarf in Werkstätten für behinderte Menschen. Vol 40. GfA-Press; 2023. apa: Herrmann, J.-P., Tackenberg, S., & Duckwitz, S. (2023). Konzept für die operative Fertigungsplanung unter Berücksichtigung der Kompetenzen von Personen mit Unterstützungsbedarf in Werkstätten für behinderte Menschen. In Nachhaltig Arbeiten und Lernen - Analyse und Gestaltung lernförderlicher und nachhaltiger Arbeitssysteme und Arbeits und Lernprozesse (Vol. 40). GfA-Press. bjps: Herrmann J-P, Tackenberg S and Duckwitz S (2023) Konzept für die operative Fertigungsplanung unter Berücksichtigung der Kompetenzen von Personen mit Unterstützungsbedarf in Werkstätten für behinderte Menschen. GfA-Press. chicago: Herrmann, Jan-Phillip, Sven Tackenberg, and Sönke Duckwitz. Konzept für die operative Fertigungsplanung unter Berücksichtigung der Kompetenzen von Personen mit Unterstützungsbedarf in Werkstätten für behinderte Menschen. Nachhaltig Arbeiten und Lernen - Analyse und Gestaltung lernförderlicher und nachhaltiger Arbeitssysteme und Arbeits und Lernprozesse. Vol. 40. GfA-Press. GfA-Press, 2023. chicago-de: Herrmann, Jan-Phillip, Sven Tackenberg und Sönke Duckwitz. 2023. Konzept für die operative Fertigungsplanung unter Berücksichtigung der Kompetenzen von Personen mit Unterstützungsbedarf in Werkstätten für behinderte Menschen. Nachhaltig Arbeiten und Lernen - Analyse und Gestaltung lernförderlicher und nachhaltiger Arbeitssysteme und Arbeits und Lernprozesse. Bd. 40. GfA-Press. GfA-Press. din1505-2-1: 'Herrmann, Jan-Phillip ; Tackenberg, Sven ; Duckwitz, Sönke: Konzept für die operative Fertigungsplanung unter Berücksichtigung der Kompetenzen von Personen mit Unterstützungsbedarf in Werkstätten für behinderte Menschen, GfA-Press. Bd. 40 : GfA-Press, 2023' havard: J.-P. Herrmann, S. Tackenberg, S. Duckwitz, Konzept für die operative Fertigungsplanung unter Berücksichtigung der Kompetenzen von Personen mit Unterstützungsbedarf in Werkstätten für behinderte Menschen, GfA-Press, 2023. ieee: J.-P. Herrmann, S. Tackenberg, and S. Duckwitz, Konzept für die operative Fertigungsplanung unter Berücksichtigung der Kompetenzen von Personen mit Unterstützungsbedarf in Werkstätten für behinderte Menschen, vol. 40. GfA-Press, 2023. mla: Herrmann, Jan-Phillip, et al. “Konzept für die operative Fertigungsplanung unter Berücksichtigung der Kompetenzen von Personen mit Unterstützungsbedarf in Werkstätten für behinderte Menschen.” Nachhaltig Arbeiten und Lernen - Analyse und Gestaltung lernförderlicher und nachhaltiger Arbeitssysteme und Arbeits und Lernprozesse, vol. 40, GfA-Press, 2023. short: J.-P. Herrmann, S. Tackenberg, S. Duckwitz, Konzept für die operative Fertigungsplanung unter Berücksichtigung der Kompetenzen von Personen mit Unterstützungsbedarf in Werkstätten für behinderte Menschen, GfA-Press, 2023. ufg: 'Herrmann, Jan-Phillip/Tackenberg, Sven/Duckwitz, Sönke: Konzept für die operative Fertigungsplanung unter Berücksichtigung der Kompetenzen von Personen mit Unterstützungsbedarf in Werkstätten für behinderte Menschen, Bd. 40, o. O. 2023 (GfA-Press).' van: Herrmann JP, Tackenberg S, Duckwitz S. Konzept für die operative Fertigungsplanung unter Berücksichtigung der Kompetenzen von Personen mit Unterstützungsbedarf in Werkstätten für behinderte Menschen. Nachhaltig Arbeiten und Lernen - Analyse und Gestaltung lernförderlicher und nachhaltiger Arbeitssysteme und Arbeits und Lernprozesse. GfA-Press; 2023. (GfA-Press; vol. 40). conference: end_date: 2023-03-03 location: Hannover name: 69. Arbeitswissenschaftlichen Kongresses start_date: 2023-03-01 date_created: 2023-06-26T11:30:06Z date_updated: 2023-06-29T12:25:51Z intvolume: ' 40' keyword: - Werkstätten für behinderte Menschen - Resource- constrained Project Scheduling Problem - Aufgabenauswahl - Simulation language: - iso: ger popular_science: '1' publication: Nachhaltig Arbeiten und Lernen - Analyse und Gestaltung lernförderlicher und nachhaltiger Arbeitssysteme und Arbeits und Lernprozesse publication_identifier: isbn: - 978-3-936804-32-4 publication_status: published publisher: GfA-Press series_title: GfA-Press status: public title: Konzept für die operative Fertigungsplanung unter Berücksichtigung der Kompetenzen von Personen mit Unterstützungsbedarf in Werkstätten für behinderte Menschen type: conference_editor_article user_id: '15514' volume: 40 year: '2023' ... --- _id: '12785' abstract: - lang: eng text: Due to the demographic aging of society, the demand for skilled caregiving is increasing. However, the already existing shortage of professional caregivers will exacerbate in the future. As a result, family caregivers must shoulder a heavier share of the care burden. To ease the burden and promote a better work-life balance, we developed the Digital Case Manager. This tool uses machine learning algorithms to learn the relationship between a care situation and the next care steps and helps family caregivers balance their professional and private lives so that they are able to continue caring for their family members without sacrificing their own jobs and personal ambitions. The data for the machine learning model are generated by means of a questionnaire based on professional assessment instruments. We implemented a proof-of-concept of the Digital Case Manager and initial tests show promising results. It offers a quick and easy-to-use tool for family caregivers in the early stages of a care situation. article_number: '1215' author: - first_name: Paul full_name: Wunderlich, Paul id: '52317' last_name: Wunderlich - first_name: Frauke full_name: Wiegräbe, Frauke id: '76510' last_name: Wiegräbe - first_name: Helene full_name: Dörksen, Helene id: '46416' last_name: Dörksen citation: ama: Wunderlich P, Wiegräbe F, Dörksen H. Digital Case Manager-A Data-Driven Tool to Support Family Caregivers with Initial Guidance. INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH. 2023;20(2). doi:10.3390/ijerph20021215 apa: Wunderlich, P., Wiegräbe, F., & Dörksen, H. (2023). Digital Case Manager-A Data-Driven Tool to Support Family Caregivers with Initial Guidance. INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH, 20(2), Article 1215. https://doi.org/10.3390/ijerph20021215 bjps: Wunderlich P, Wiegräbe F and Dörksen H (2023) Digital Case Manager-A Data-Driven Tool to Support Family Caregivers with Initial Guidance. INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH 20. chicago: Wunderlich, Paul, Frauke Wiegräbe, and Helene Dörksen. “Digital Case Manager-A Data-Driven Tool to Support Family Caregivers with Initial Guidance.” INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH 20, no. 2 (2023). https://doi.org/10.3390/ijerph20021215. chicago-de: Wunderlich, Paul, Frauke Wiegräbe und Helene Dörksen. 2023. Digital Case Manager-A Data-Driven Tool to Support Family Caregivers with Initial Guidance. INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH 20, Nr. 2. doi:10.3390/ijerph20021215, . din1505-2-1: 'Wunderlich, Paul ; Wiegräbe, Frauke ; Dörksen, Helene: Digital Case Manager-A Data-Driven Tool to Support Family Caregivers with Initial Guidance. In: INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH Bd. 20. Basel, MDPI (2023), Nr. 2' havard: P. Wunderlich, F. Wiegräbe, H. Dörksen, Digital Case Manager-A Data-Driven Tool to Support Family Caregivers with Initial Guidance, INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH. 20 (2023). ieee: 'P. Wunderlich, F. Wiegräbe, and H. Dörksen, “Digital Case Manager-A Data-Driven Tool to Support Family Caregivers with Initial Guidance,” INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH, vol. 20, no. 2, Art. no. 1215, 2023, doi: 10.3390/ijerph20021215.' mla: Wunderlich, Paul, et al. “Digital Case Manager-A Data-Driven Tool to Support Family Caregivers with Initial Guidance.” INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH, vol. 20, no. 2, 1215, 2023, https://doi.org/10.3390/ijerph20021215. short: P. Wunderlich, F. Wiegräbe, H. Dörksen, INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH 20 (2023). ufg: 'Wunderlich, Paul/Wiegräbe, Frauke/Dörksen, Helene: Digital Case Manager-A Data-Driven Tool to Support Family Caregivers with Initial Guidance, in: INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH 20 (2023), H. 2.' van: Wunderlich P, Wiegräbe F, Dörksen H. Digital Case Manager-A Data-Driven Tool to Support Family Caregivers with Initial Guidance. INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH. 2023;20(2). date_created: 2025-04-14T13:39:52Z date_updated: 2025-06-25T13:11:41Z department: - _id: DEP5023 - _id: DEP5000 doi: 10.3390/ijerph20021215 external_id: isi: - '000918039900001' pmid: - '36673969' intvolume: ' 20' isi: '1' issue: '2' keyword: - machine learning - healthcare - case management - caring - multi-label classification language: - iso: eng place: Basel pmid: '1' publication: INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH publication_identifier: eissn: - 1660-4601 issn: - '1661-7827 ' publication_status: published publisher: MDPI quality_controlled: '1' status: public title: Digital Case Manager-A Data-Driven Tool to Support Family Caregivers with Initial Guidance type: scientific_journal_article user_id: '83781' volume: 20 year: '2023' ... --- _id: '11377' abstract: - lang: eng text: consuming and often performed rather empirically. Efficient optimization of multiple objectives such as process time, viable cell density, number of operating steps & cultivation scales, required medium, amount of product as well as product quality depicts a promising approach. This contribution presents a workflow which couples uncertainty-based upstream simulation and Bayes optimization using Gaussian processes. Its application is demonstrated in a simulation case study for a relevant industrial task in process development, the design of a robust cell culture expansion process (seed train), meaning that despite uncertainties and variabilities concerning cell growth, low variations of viable cell density during the seed train are obtained. Compared to a non-optimized reference seed train, the optimized process showed much lower deviation rates regarding viable cell densities (<10% instead of 41.7%) using five or four shake flask scales and seed train duration could be reduced by 56 h from 576 h to 520 h. Overall, it is shown that applying Bayes optimization allows for optimization of a multi-objective optimization function with several optimizable input variables and under a considerable amount of constraints with a low computational effort. This approach provides the potential to be used in the form of a decision tool, e.g., for the choice of an optimal and robust seed train design or for further optimization tasks within process development. article_number: '883' author: - first_name: Tanja full_name: Hernández Rodriguez, Tanja id: '52466' last_name: Hernández Rodriguez - first_name: Anton full_name: Sekulic, Anton last_name: Sekulic - first_name: Markus full_name: Lange-Hegermann, Markus id: '71761' last_name: Lange-Hegermann - first_name: Björn full_name: Frahm, Björn id: '45666' last_name: Frahm citation: ama: Hernández Rodriguez T, Sekulic A, Lange-Hegermann M, Frahm B. Designing Robust Biotechnological Processes Regarding Variabilities Using Multi-Objective Optimization Applied to a Biopharmaceutical Seed Train Design. Processes. 2022;10(5). doi:10.3390/pr10050883 apa: Hernández Rodriguez, T., Sekulic, A., Lange-Hegermann, M., & Frahm, B. (2022). Designing Robust Biotechnological Processes Regarding Variabilities Using Multi-Objective Optimization Applied to a Biopharmaceutical Seed Train Design. Processes, 10(5), Article 883. https://doi.org/10.3390/pr10050883 bjps: Hernández Rodriguez T et al. (2022) Designing Robust Biotechnological Processes Regarding Variabilities Using Multi-Objective Optimization Applied to a Biopharmaceutical Seed Train Design. Processes 10. chicago: Hernández Rodriguez, Tanja, Anton Sekulic, Markus Lange-Hegermann, and Björn Frahm. “Designing Robust Biotechnological Processes Regarding Variabilities Using Multi-Objective Optimization Applied to a Biopharmaceutical Seed Train Design.” Processes 10, no. 5 (2022). https://doi.org/10.3390/pr10050883. chicago-de: Hernández Rodriguez, Tanja, Anton Sekulic, Markus Lange-Hegermann und Björn Frahm. 2022. Designing Robust Biotechnological Processes Regarding Variabilities Using Multi-Objective Optimization Applied to a Biopharmaceutical Seed Train Design. Processes 10, Nr. 5. doi:10.3390/pr10050883, . din1505-2-1: 'Hernández Rodriguez, Tanja ; Sekulic, Anton ; Lange-Hegermann, Markus ; Frahm, Björn: Designing Robust Biotechnological Processes Regarding Variabilities Using Multi-Objective Optimization Applied to a Biopharmaceutical Seed Train Design. In: Processes Bd. 10. Basel, MDPI AG (2022), Nr. 5' havard: T. Hernández Rodriguez, A. Sekulic, M. Lange-Hegermann, B. Frahm, Designing Robust Biotechnological Processes Regarding Variabilities Using Multi-Objective Optimization Applied to a Biopharmaceutical Seed Train Design, Processes. 10 (2022). ieee: 'T. Hernández Rodriguez, A. Sekulic, M. Lange-Hegermann, and B. Frahm, “Designing Robust Biotechnological Processes Regarding Variabilities Using Multi-Objective Optimization Applied to a Biopharmaceutical Seed Train Design,” Processes, vol. 10, no. 5, Art. no. 883, 2022, doi: 10.3390/pr10050883.' mla: Hernández Rodriguez, Tanja, et al. “Designing Robust Biotechnological Processes Regarding Variabilities Using Multi-Objective Optimization Applied to a Biopharmaceutical Seed Train Design.” Processes, vol. 10, no. 5, 883, 2022, https://doi.org/10.3390/pr10050883. short: T. Hernández Rodriguez, A. Sekulic, M. Lange-Hegermann, B. Frahm, Processes 10 (2022). ufg: 'Hernández Rodriguez, Tanja u. a.: Designing Robust Biotechnological Processes Regarding Variabilities Using Multi-Objective Optimization Applied to a Biopharmaceutical Seed Train Design, in: Processes 10 (2022), H. 5.' van: Hernández Rodriguez T, Sekulic A, Lange-Hegermann M, Frahm B. Designing Robust Biotechnological Processes Regarding Variabilities Using Multi-Objective Optimization Applied to a Biopharmaceutical Seed Train Design. Processes. 2022;10(5). date_created: 2024-04-25T13:35:04Z date_updated: 2024-05-21T09:30:15Z department: - _id: DEP4000 doi: 10.3390/pr10050883 intvolume: ' 10' issue: '5' keyword: - Gaussian processes - Bayes optimization - Pareto optimization - multi-objective - cell culture - seed train language: - iso: eng place: Basel publication: Processes publication_identifier: eissn: - 2227-9717 publication_status: published publisher: MDPI AG status: public title: Designing Robust Biotechnological Processes Regarding Variabilities Using Multi-Objective Optimization Applied to a Biopharmaceutical Seed Train Design type: scientific_journal_article user_id: '83781' volume: 10 year: '2022' ... --- _id: '9356' abstract: - lang: eng text: In today’s manufacturing industry, enterprise-resource-planning (ERP) systems reach their limit when planning and scheduling production subject to multiple objectives and constraints. Advanced planning and scheduling (APS) systems provide these capabilities and are an extension for ERP systems. However, when integrating an APS and ERP system, the ERP data frequently lacks quality, hindering the APS system from working as required. This paper introduces a data quality (DQ) assessment framework that employs a Bayesian Network (BN) to perform quick DQ assessments based on expert interviews and DQ measurements with actual ERP data. We explain the BN’s functionality, design, and validation and show how using the perceived DQ of experts and a semi-supervised learning algorithm improves the BN’s predictions over time. We discuss applying our framework in an APS system implementation project involving an APS system provider and a medium-sized manufacturer of hydraulic cylinders. Despite considering the DQ assessment framework in such a specific context, it is not restricted to a particular domain. We close by discussing the framework’s limits, particularly the BN as a DQ assessment methodology and future works to improve its performance. author: - first_name: Jan-Phillip full_name: Herrmann, Jan-Phillip id: '75846' last_name: Herrmann - first_name: Sven full_name: Tackenberg, Sven id: '71470' last_name: Tackenberg - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Jörg full_name: Hartlief, Jörg last_name: Hartlief - first_name: Jens full_name: ' Rautenstengel, Jens' last_name: ' Rautenstengel' - first_name: Christine full_name: Loeser, Christine last_name: Loeser - first_name: 'Jörg ' full_name: 'Böhme, Jörg ' last_name: Böhme citation: ama: Herrmann JP, Tackenberg S, Padoano E, et al. An ERP Data Quality Assessment Framework for the Implementation of an APS system using Bayesian Networks. Procedia Computer Science. 2022;200:194-204. doi:https://doi.org/10.1016/j.procs.2022.01.218 apa: Herrmann, J.-P., Tackenberg, S., Padoano, E., Hartlief, J., Rautenstengel, J., Loeser, C., & Böhme, J. (2022). An ERP Data Quality Assessment Framework for the Implementation of an APS system using Bayesian Networks. Procedia Computer Science, 200, 194–204. https://doi.org/10.1016/j.procs.2022.01.218 bjps: Herrmann J-P et al. (2022) An ERP Data Quality Assessment Framework for the Implementation of an APS System Using Bayesian Networks. Procedia Computer Science 200, 194–204. chicago: 'Herrmann, Jan-Phillip, Sven Tackenberg, Elio Padoano, Jörg Hartlief, Jens Rautenstengel, Christine Loeser, and Jörg Böhme. “An ERP Data Quality Assessment Framework for the Implementation of an APS System Using Bayesian Networks.” Procedia Computer Science 200 (2022): 194–204. https://doi.org/10.1016/j.procs.2022.01.218.' chicago-de: 'Herrmann, Jan-Phillip, Sven Tackenberg, Elio Padoano, Jörg Hartlief, Jens Rautenstengel, Christine Loeser und Jörg Böhme. 2022. An ERP Data Quality Assessment Framework for the Implementation of an APS system using Bayesian Networks. Procedia Computer Science 200: 194–204. doi:https://doi.org/10.1016/j.procs.2022.01.218, .' din1505-2-1: 'Herrmann, Jan-Phillip ; Tackenberg, Sven ; Padoano, Elio ; Hartlief, Jörg ; Rautenstengel, Jens ; Loeser, Christine ; Böhme, Jörg : An ERP Data Quality Assessment Framework for the Implementation of an APS system using Bayesian Networks. In: Procedia Computer Science Bd. 200, Elsevier (2022), S. 194–204' havard: J.-P. Herrmann, S. Tackenberg, E. Padoano, J. Hartlief, J. Rautenstengel, C. Loeser, J. Böhme, An ERP Data Quality Assessment Framework for the Implementation of an APS system using Bayesian Networks, Procedia Computer Science. 200 (2022) 194–204. ieee: 'J.-P. Herrmann et al., “An ERP Data Quality Assessment Framework for the Implementation of an APS system using Bayesian Networks,” Procedia Computer Science, vol. 200, pp. 194–204, 2022, doi: https://doi.org/10.1016/j.procs.2022.01.218.' mla: Herrmann, Jan-Phillip, et al. “An ERP Data Quality Assessment Framework for the Implementation of an APS System Using Bayesian Networks.” Procedia Computer Science, vol. 200, 2022, pp. 194–204, https://doi.org/10.1016/j.procs.2022.01.218. short: J.-P. Herrmann, S. Tackenberg, E. Padoano, J. Hartlief, J. Rautenstengel, C. Loeser, J. Böhme, Procedia Computer Science 200 (2022) 194–204. ufg: 'Herrmann, Jan-Phillip u. a.: An ERP Data Quality Assessment Framework for the Implementation of an APS system using Bayesian Networks, in: Procedia Computer Science 200 (2022),  S. 194–204.' van: Herrmann JP, Tackenberg S, Padoano E, Hartlief J, Rautenstengel J, Loeser C, et al. An ERP Data Quality Assessment Framework for the Implementation of an APS system using Bayesian Networks. Procedia Computer Science. 2022;200:194–204. date_created: 2023-01-25T12:00:32Z date_updated: 2024-08-06T11:45:41Z department: - _id: DEP7020 doi: https://doi.org/10.1016/j.procs.2022.01.218 intvolume: ' 200' keyword: - Data Quality Assessment - Advanced Planning - Scheduling - Bayesian Network - Enterprise Resource Planning language: - iso: eng main_file_link: - open_access: '1' url: https://www.sciencedirect.com/science/article/pii/S1877050922002277 oa: '1' page: 194-204 publication: Procedia Computer Science publication_identifier: issn: - '1877-0509 ' publication_status: published publisher: Elsevier quality_controlled: '1' status: public title: An ERP Data Quality Assessment Framework for the Implementation of an APS system using Bayesian Networks type: journal_article user_id: '83781' volume: 200 year: '2022' ... --- _id: '10193' abstract: - lang: eng text: Development and optimization of biopharmaceutical production processes with cell cultures is cost- and time-consuming and often performed rather empirically. Efficient optimization of multiple objectives such as process time, viable cell density, number of operating steps & cultivation scales, required medium, amount of product as well as product quality depicts a promising approach. This contribution presents a workflow which couples uncertainty-based upstream simulation and Bayes optimization using Gaussian processes. Its application is demonstrated in a simulation case study for a relevant industrial task in process development, the design of a robust cell culture expansion process (seed train), meaning that despite uncertainties and variabilities concerning cell growth, low variations of viable cell density during the seed train are obtained. Compared to a non-optimized reference seed train, the optimized process showed much lower deviation rates regarding viable cell densities (<10% instead of 41.7%) using five or four shake flask scales and seed train duration could be reduced by 56 h from 576 h to 520 h. Overall, it is shown that applying Bayes optimization allows for optimization of a multi-objective optimization function with several optimizable input variables and under a considerable amount of constraints with a low computational effort. This approach provides the potential to be used in the form of a decision tool, e.g., for the choice of an optimal and robust seed train design or for further optimization tasks within process development. author: - first_name: Tanja full_name: Hernández Rodriguez, Tanja id: '52466' last_name: Hernández Rodriguez - first_name: Anton full_name: Sekulic, Anton last_name: Sekulic - first_name: Markus full_name: Lange-Hegermann, Markus id: '71761' last_name: Lange-Hegermann - first_name: Björn full_name: Frahm, Björn id: '45666' last_name: Frahm citation: ama: 'Hernández Rodriguez T, Sekulic A, Lange-Hegermann M, Frahm B. Designing robust biotechnological processes regarding variabilities using multi-objective optimization applied to a biopharmaceutical seed train design. In: Pörtner R, Möller J, eds. Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing. Vol special issue. Processes : open access journal. MDPI; 2022:21-48. doi:https://doi.org/10.3390/pr10050883' apa: 'Hernández Rodriguez, T., Sekulic, A., Lange-Hegermann, M., & Frahm, B. (2022). Designing robust biotechnological processes regarding variabilities using multi-objective optimization applied to a biopharmaceutical seed train design. In R. Pörtner & J. Möller (Eds.), Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing: Vol. special issue (pp. 21–48). MDPI. https://doi.org/10.3390/pr10050883' bjps: 'Hernández Rodriguez T et al. (2022) Designing Robust Biotechnological Processes Regarding Variabilities Using Multi-Objective Optimization Applied to a Biopharmaceutical Seed Train Design. In Pörtner R and Möller J (eds), Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing, vol. special issue. Basel: MDPI, pp. 21–48.' chicago: 'Hernández Rodriguez, Tanja, Anton Sekulic, Markus Lange-Hegermann, and Björn Frahm. “Designing Robust Biotechnological Processes Regarding Variabilities Using Multi-Objective Optimization Applied to a Biopharmaceutical Seed Train Design.” In Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing, edited by Ralf Pörtner and Johannes Möller, special issue:21–48. Processes : Open Access Journal. Basel: MDPI, 2022. https://doi.org/10.3390/pr10050883.' chicago-de: 'Hernández Rodriguez, Tanja, Anton Sekulic, Markus Lange-Hegermann und Björn Frahm. 2022. Designing robust biotechnological processes regarding variabilities using multi-objective optimization applied to a biopharmaceutical seed train design. In: Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing, hg. von Ralf Pörtner und Johannes Möller, special issue:21–48. Processes : open access journal. Basel: MDPI. doi:https://doi.org/10.3390/pr10050883, .' din1505-2-1: 'Hernández Rodriguez, Tanja ; Sekulic, Anton ; Lange-Hegermann, Markus ; Frahm, Björn: Designing robust biotechnological processes regarding variabilities using multi-objective optimization applied to a biopharmaceutical seed train design. In: Pörtner, R. ; Möller, J. (Hrsg.): Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing, Processes : open access journal. Bd. special issue. Basel : MDPI, 2022, S. 21–48' havard: 'T. Hernández Rodriguez, A. Sekulic, M. Lange-Hegermann, B. Frahm, Designing robust biotechnological processes regarding variabilities using multi-objective optimization applied to a biopharmaceutical seed train design, in: R. Pörtner, J. Möller (Eds.), Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing, MDPI, Basel, 2022: pp. 21–48.' ieee: 'T. Hernández Rodriguez, A. Sekulic, M. Lange-Hegermann, and B. Frahm, “Designing robust biotechnological processes regarding variabilities using multi-objective optimization applied to a biopharmaceutical seed train design,” in Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing, vol. special issue, R. Pörtner and J. Möller, Eds. Basel: MDPI, 2022, pp. 21–48. doi: https://doi.org/10.3390/pr10050883.' mla: Hernández Rodriguez, Tanja, et al. “Designing Robust Biotechnological Processes Regarding Variabilities Using Multi-Objective Optimization Applied to a Biopharmaceutical Seed Train Design.” Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing, edited by Ralf Pörtner and Johannes Möller, vol. special issue, MDPI, 2022, pp. 21–48, https://doi.org/10.3390/pr10050883. short: 'T. Hernández Rodriguez, A. Sekulic, M. Lange-Hegermann, B. Frahm, in: R. Pörtner, J. Möller (Eds.), Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing, MDPI, Basel, 2022, pp. 21–48.' ufg: 'Hernández Rodriguez, Tanja u. a.: Designing robust biotechnological processes regarding variabilities using multi-objective optimization applied to a biopharmaceutical seed train design, in: Pörtner, Ralf/Möller, Johannes (Hgg.): Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing, Band special issue, Basel 2022 (Processes : open access journal),  S. 21–48.' van: 'Hernández Rodriguez T, Sekulic A, Lange-Hegermann M, Frahm B. Designing robust biotechnological processes regarding variabilities using multi-objective optimization applied to a biopharmaceutical seed train design. In: Pörtner R, Möller J, editors. Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing. Basel: MDPI; 2022. p. 21–48. (Processes : open access journal; vol. special issue).' date_created: 2023-08-08T12:58:36Z date_updated: 2023-08-16T09:24:16Z department: - _id: DEP4000 doi: https://doi.org/10.3390/pr10050883 editor: - first_name: Ralf full_name: Pörtner, Ralf last_name: Pörtner - first_name: Johannes full_name: Möller, Johannes last_name: Möller keyword: - Gaussian processes - Bayes optimization - Pareto optimization - multi-objective - cell culture - seed train language: - iso: eng page: 21-48 place: Basel publication: Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing publication_identifier: eisbn: - 978-3-0365-5209-5 eissn: - 2227-9717 isbn: - 978-3-0365-5210-1 publication_status: published publisher: MDPI quality_controlled: '1' series_title: 'Processes : open access journal' status: public title: Designing robust biotechnological processes regarding variabilities using multi-objective optimization applied to a biopharmaceutical seed train design type: book_chapter user_id: '83781' volume: special issue year: '2022' ... --- _id: '6925' abstract: - lang: eng text: "The compatibility concept is widely used in psychology and ergonomics. It describes the fit between elements of a sociotechnical system which is a prerequisite to successfully cooperate towards a common goal. For at least three decades, cognitive compatibility is of increasing importance. It describes the fit of externally presented information, information processing, and the required motor action. However, with increasing system complexity, probability for incompatibility increases, too, leading to time losses, errors and overall degraded performance. The elimination of cognitive incompatibilities through ergonomic measures at the workplace requires a lot of creativity and effort. Using practical examples from mixed-model assembly, improved information management and the use of informational assistance systems are discussed as promising ergonomic approaches. The ultimate goal is to avoid cognitive overload, for example in part picking or assembly tools choosing. To find a fit between externally mediated work instructions via displays and the subjectively used internal models and competencies is a challenging task. Only if this fit is given the system is perceived as beneficial. To achieve this, the assistance system should be configurable to fit individual needs as far as possible. Successful system design requires early participation and comprehensive integration of the assistance systems into the existing IT infrastructure.\r\n\r\nPractical relevance: Varied manual assembly requires a high degree of cognitive work. A rise in complexity of the assembly task increases the risk that cognitive incompatibility and thus cognitive overload will occur more frequently. It is shown that such unhealthy conditions can be countered by better information presentation and by the use of individually adaptable informational assistance systems." author: - first_name: Dominic full_name: Bläsing, Dominic last_name: Bläsing - first_name: Manfred full_name: Bornewasser, Manfred last_name: Bornewasser - first_name: Sven full_name: Hinrichsen, Sven id: '49010' last_name: Hinrichsen citation: ama: Bläsing D, Bornewasser M, Hinrichsen S. Cognitive compatibility in modern manual mixed-model assembly systems. Zeitschrift für Arbeitswissenschaft. 2021. doi:10.1007/s41449-021-00296-1 apa: Bläsing, D., Bornewasser, M., & Hinrichsen, S. (2021). Cognitive compatibility in modern manual mixed-model assembly systems. Zeitschrift Für Arbeitswissenschaft. https://doi.org/10.1007/s41449-021-00296-1 bjps: Bläsing D, Bornewasser M and Hinrichsen S (2021) Cognitive Compatibility in Modern Manual Mixed-Model Assembly Systems. Zeitschrift für Arbeitswissenschaft. chicago: Bläsing, Dominic, Manfred Bornewasser, and Sven Hinrichsen. “Cognitive Compatibility in Modern Manual Mixed-Model Assembly Systems.” Zeitschrift Für Arbeitswissenschaft, 2021. https://doi.org/10.1007/s41449-021-00296-1. chicago-de: Bläsing, Dominic, Manfred Bornewasser und Sven Hinrichsen. 2021. Cognitive compatibility in modern manual mixed-model assembly systems. Zeitschrift für Arbeitswissenschaft. doi:10.1007/s41449-021-00296-1, . din1505-2-1: 'Bläsing, Dominic ; Bornewasser, Manfred ; Hinrichsen, Sven: Cognitive compatibility in modern manual mixed-model assembly systems. In: Zeitschrift für Arbeitswissenschaft, Springer (2021)' havard: D. Bläsing, M. Bornewasser, S. Hinrichsen, Cognitive compatibility in modern manual mixed-model assembly systems, Zeitschrift Für Arbeitswissenschaft. (2021). ieee: D. Bläsing, M. Bornewasser, and S. Hinrichsen, “Cognitive compatibility in modern manual mixed-model assembly systems,” Zeitschrift für Arbeitswissenschaft, 2021. mla: Bläsing, Dominic, et al. “Cognitive Compatibility in Modern Manual Mixed-Model Assembly Systems.” Zeitschrift Für Arbeitswissenschaft, Springer, 2021, doi:10.1007/s41449-021-00296-1. short: D. Bläsing, M. Bornewasser, S. Hinrichsen, Zeitschrift Für Arbeitswissenschaft (2021). ufg: 'Bläsing, Dominic et. al. (2021): Cognitive compatibility in modern manual mixed-model assembly systems, in: Zeitschrift für Arbeitswissenschaft.' van: Bläsing D, Bornewasser M, Hinrichsen S. Cognitive compatibility in modern manual mixed-model assembly systems. Zeitschrift für Arbeitswissenschaft. 2021; date_created: 2021-12-21T17:13:23Z date_updated: 2023-03-15T13:50:08Z department: - _id: DEP7020 - _id: DEP1305 doi: 10.1007/s41449-021-00296-1 keyword: - Compatibility - Mental model - Mental workload - Multi-model assembly - Informational assistance systems language: - iso: eng publication: Zeitschrift für Arbeitswissenschaft publication_identifier: issn: - 0340-2444 - 2366-4681 publication_status: published publisher: Springer quality_controlled: '1' status: public title: Cognitive compatibility in modern manual mixed-model assembly systems type: journal_article user_id: '49010' year: 2021 ... --- _id: '6003' abstract: - lang: ger text: In industriellen Szenarien wächst seit Längerem der Bedarf an drahtloser und zuverlässiger Kommunikation. Es gibt hierzu einige aus der IT-Welt adaptierte Standards, welche in vielen Anwendungen im industriellen Umfeld nicht ausreichen. Daher wurde bei der Spezifikation des neuen 5G-Standards explizit die Nutzung im industriellen Umfeld mit berücksichtigt. Diese Arbeit beschäftigt sich mit den Vorteilen der Multi-Connectivity (MC), welche sich durch die Architektur des neuen 5G-NR Standards in der Automatisierungstechnik ergeben können. Hierzu wurden im ersten Schritt Funkkanalmessungen in einer industrienahen Umgebung – der SmartFactoryOWL – durchgeführt, und im weiteren Verlauf die MC in einen Kommunikationsstack integriert und die Zuverlässigkeit (Reliability) (REL) bei verschiedenen MCKonfigurationen ermittelt. Im praktischen Aufbau konnte eine erhöhte REL der drahtlosen Kommunikation im industriellen Kontext unter Einsatz der MC nachgewiesen werden. author: - first_name: Niels Hendrik full_name: Fliedner, Niels Hendrik id: '57956' last_name: Fliedner orcid: 0000-0003-0484-1328 - first_name: Roland full_name: Heß, Roland last_name: Heß - first_name: Stefan full_name: Witte, Stefan id: '1605' last_name: Witte citation: ama: 'Fliedner NH, Heß R, Witte S. Multi-Connectivity in 5G Industrial Environments. In: Jumar U, Jasperneite J, Institut für Automation und Kommunikation e.V., eds. KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium “Kommunikation in der Automation.” Otto-von-Guericke-Universität Magdeburg. R-PÖ; 2019.' apa: 'Fliedner, N. H., Heß, R., & Witte, S. (2019). Multi-Connectivity in 5G Industrial Environments. In U. Jumar, J. Jasperneite, & Institut für Automation und Kommunikation e.V. (Eds.), KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium “Kommunikation in der Automation.” Otto-von-Guericke-Universität Magdeburg. R-PÖ.' bjps: 'Fliedner NH, Heß R and Witte S (2019) Multi-Connectivity in 5G Industrial Environments. In Jumar U, Jasperneite J, and Institut für Automation und Kommunikation e.V. (eds), KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium ‘Kommunikation in der Automation’. Magdeburg: Otto-von-Guericke-Universität Magdeburg. R-PÖ.' chicago: 'Fliedner, Niels Hendrik, Roland Heß, and Stefan Witte. “Multi-Connectivity in 5G Industrial Environments.” In KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium “Kommunikation in der Automation,” edited by Ulrich Jumar, Jürgen Jasperneite, and Institut für Automation und Kommunikation e.V. Magdeburg: Otto-von-Guericke-Universität Magdeburg. R-PÖ, 2019.' chicago-de: 'Fliedner, Niels Hendrik, Roland Heß und Stefan Witte. 2019. Multi-Connectivity in 5G Industrial Environments. In: KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium „Kommunikation in der Automation“, hg. von Ulrich Jumar, Jürgen Jasperneite, und Institut für Automation und Kommunikation e.V. Magdeburg: Otto-von-Guericke-Universität Magdeburg. R-PÖ.' din1505-2-1: 'Fliedner, Niels Hendrik ; Heß, Roland ; Witte, Stefan: Multi-Connectivity in 5G Industrial Environments. In: Jumar, U. ; Jasperneite, J. ; Institut für Automation und Kommunikation e.V. (Hrsg.): KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium „Kommunikation in der Automation“. Magdeburg : Otto-von-Guericke-Universität Magdeburg. R-PÖ, 2019' havard: 'N.H. Fliedner, R. Heß, S. Witte, Multi-Connectivity in 5G Industrial Environments, in: U. Jumar, J. Jasperneite, Institut für Automation und Kommunikation e.V. (Eds.), KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium “Kommunikation in der Automation,” Otto-von-Guericke-Universität Magdeburg. R-PÖ, Magdeburg, 2019.' ieee: 'N. H. Fliedner, R. Heß, and S. Witte, “Multi-Connectivity in 5G Industrial Environments,” in KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium “Kommunikation in der Automation,” Magdeburg, 2019.' mla: 'Fliedner, Niels Hendrik, et al. “Multi-Connectivity in 5G Industrial Environments.” KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium “Kommunikation in der Automation,” edited by Ulrich Jumar et al., Otto-von-Guericke-Universität Magdeburg. R-PÖ, 2019.' short: 'N.H. Fliedner, R. Heß, S. Witte, in: U. Jumar, J. Jasperneite, Institut für Automation und Kommunikation e.V. (Eds.), KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium “Kommunikation in der Automation,” Otto-von-Guericke-Universität Magdeburg. R-PÖ, Magdeburg, 2019.' ufg: 'Fliedner, Niels Hendrik/Heß, Roland/Witte, Stefan: Multi-Connectivity in 5G Industrial Environments, in: Jumar, Ulrich/Jasperneite, Jürgen, Institut für Automation und Kommunikation e.V. (Hgg.): KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium „Kommunikation in der Automation“, Magdeburg 2019.' van: 'Fliedner NH, Heß R, Witte S. Multi-Connectivity in 5G Industrial Environments. In: Jumar U, Jasperneite J, Institut für Automation und Kommunikation e.V., editors. KommA 2019 : Kommunikation in der Automation : 20-21112019 : 10 Jahreskolloquium “Kommunikation in der Automation.” Magdeburg: Otto-von-Guericke-Universität Magdeburg. R-PÖ; 2019.' conference: end_date: 2019-11-21 location: Magdeburg name: 2019 Kommunikation in der Automation (KommA) start_date: 2019-11-20 corporate_editor: - Institut für Automation und Kommunikation e.V. date_created: 2021-06-22T09:34:20Z date_updated: 2023-08-14T13:16:56Z ddc: - '000' department: - _id: DEP5023 - _id: DEP5010 editor: - first_name: Ulrich full_name: Jumar, Ulrich last_name: Jumar - first_name: Jürgen full_name: Jasperneite, Jürgen last_name: Jasperneite extern: '1' keyword: - 5G - Multi-Connectivity - Zuverlässigkeit language: - iso: ger main_file_link: - url: https://tydirium.init.th-owl.de/s/ErCo2mjFdJQDoXN?dir=undefined&path=%2FKommA%202019%2FPaper%2FSession1_Funk&openfile=7286659 place: Magdeburg publication: 'KommA 2019 : Kommunikation in der Automation : 20.-21.11.2019 : 10. Jahreskolloquium "Kommunikation in der Automation"' publication_identifier: isbn: - 978-3-944722-85-6 publication_status: published publisher: Otto-von-Guericke-Universität Magdeburg. R-PÖ quality_controlled: '1' status: public title: Multi-Connectivity in 5G Industrial Environments type: conference user_id: '83781' year: '2019' ... --- _id: '12834' abstract: - lang: eng text: In the context of Industry 4.0, extensive deployment and application of advanced manufacturing equipment and various sensors is leading to a growing demand for data exchange between different devices. In smart factories, network transmission has multiprotocol features of wired/wireless communication, and different data flows have different real-time requirements. In this article, a heterogeneous network architecture based on software-defined network is proposed for realizing cross-network flexible forwarding of multisource manufacturing data and optimized utilization of network resources. Subsequently, the mechanism of cross-network fusion and scheduling (CNFS) is analyzed from the perspective of high dynamic characteristics and different delay requirements of data flows. Based on this analysis, a route-aware data flow dynamic reconstruction algorithm is proposed. The proposed algorithm improves the efficiency of manufacturing data cross-network fusion, especially for multivariety and small-batch intelligent manufacturing systems. Furthermore, for meeting the bandwidth requirements of different delay flows, a delay-sensitive network bandwidth scheduling algorithm is proposed. Finally, the effectiveness of the proposed CNFS mechanism is verified using a candy packaging intelligent production line prototype platform. author: - first_name: Jiafu full_name: Wan, Jiafu last_name: Wan - first_name: Jun full_name: Yang, Jun last_name: Yang - first_name: Shiyong full_name: Wang, Shiyong last_name: Wang - first_name: Di full_name: Li, Di last_name: Li - first_name: Peng full_name: Li, Peng id: '58937' last_name: Li - first_name: Min full_name: Xia, Min last_name: Xia citation: ama: Wan J, Yang J, Wang S, Li D, Li P, Xia M. Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory. IEEE Transactions on Industrial Informatics. 2019;16(9):6059-6068. doi:10.1109/tii.2019.2952669 apa: Wan, J., Yang, J., Wang, S., Li, D., Li, P., & Xia, M. (2019). Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory. IEEE Transactions on Industrial Informatics, 16(9), 6059–6068. https://doi.org/10.1109/tii.2019.2952669 bjps: Wan J et al. (2019) Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory. IEEE Transactions on Industrial Informatics 16, 6059–6068. chicago: 'Wan, Jiafu, Jun Yang, Shiyong Wang, Di Li, Peng Li, and Min Xia. “Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory.” IEEE Transactions on Industrial Informatics 16, no. 9 (2019): 6059–68. https://doi.org/10.1109/tii.2019.2952669.' chicago-de: 'Wan, Jiafu, Jun Yang, Shiyong Wang, Di Li, Peng Li und Min Xia. 2019. Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory. IEEE Transactions on Industrial Informatics 16, Nr. 9: 6059–6068. doi:10.1109/tii.2019.2952669, .' din1505-2-1: 'Wan, Jiafu ; Yang, Jun ; Wang, Shiyong ; Li, Di ; Li, Peng ; Xia, Min: Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory. In: IEEE Transactions on Industrial Informatics Bd. 16. New York, NY, Institute of Electrical and Electronics Engineers (IEEE) (2019), Nr. 9, S. 6059–6068' havard: J. Wan, J. Yang, S. Wang, D. Li, P. Li, M. Xia, Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory, IEEE Transactions on Industrial Informatics. 16 (2019) 6059–6068. ieee: 'J. Wan, J. Yang, S. Wang, D. Li, P. Li, and M. Xia, “Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory,” IEEE Transactions on Industrial Informatics, vol. 16, no. 9, pp. 6059–6068, 2019, doi: 10.1109/tii.2019.2952669.' mla: Wan, Jiafu, et al. “Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory.” IEEE Transactions on Industrial Informatics, vol. 16, no. 9, 2019, pp. 6059–68, https://doi.org/10.1109/tii.2019.2952669. short: J. Wan, J. Yang, S. Wang, D. Li, P. Li, M. Xia, IEEE Transactions on Industrial Informatics 16 (2019) 6059–6068. ufg: 'Wan, Jiafu u. a.: Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory, in: IEEE Transactions on Industrial Informatics 16 (2019), H. 9,  S. 6059–6068.' van: Wan J, Yang J, Wang S, Li D, Li P, Xia M. Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory. IEEE Transactions on Industrial Informatics. 2019;16(9):6059–68. date_created: 2025-04-23T08:35:16Z date_updated: 2025-06-26T13:26:20Z department: - _id: DEP5023 doi: 10.1109/tii.2019.2952669 external_id: isi: - '000542966300043' intvolume: ' 16' isi: '1' issue: '9' keyword: - Heterogeneous networks - Real-time systems - Bandwidth - Job shop scheduling - Smart manufacturing - Computer architecture - Cross-network fusion - heterogeneous networks - network resource language: - iso: eng page: 6059-6068 place: New York, NY publication: IEEE Transactions on Industrial Informatics publication_identifier: eissn: - 1941-0050 issn: - 1551-3203 publication_status: published publisher: Institute of Electrical and Electronics Engineers (IEEE) status: public title: Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory type: scientific_journal_article user_id: '83781' volume: 16 year: '2019' ... --- _id: '549' author: - first_name: André full_name: Springer, André id: '71733' last_name: Springer - first_name: Sarah full_name: Nothdurft, Sarah last_name: Nothdurft - first_name: Rabi full_name: Lahdo, Rabi last_name: Lahdo - first_name: Oliver full_name: Seffer, Oliver last_name: Seffer citation: ama: 'Springer A, Nothdurft S, Lahdo R, Seffer O. Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. Lemgo: Technische Hochschule Ostwestfalen-Lippe; 2018.' apa: 'Springer, A., Nothdurft, S., Lahdo, R., & Seffer, O. (2018). Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. 8th International Conference on Production Engineering and Management. Lemgo: Technische Hochschule Ostwestfalen-Lippe.' bjps: 'Springer A et al. (2018) Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. Lemgo: Technische Hochschule Ostwestfalen-Lippe.' chicago: 'Springer, André, Sarah Nothdurft, Rabi Lahdo, and Oliver Seffer. Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. 8th International Conference on Production Engineering and Management. Lemgo: Technische Hochschule Ostwestfalen-Lippe, 2018.' chicago-de: 'Springer, André, Sarah Nothdurft, Rabi Lahdo und Oliver Seffer. 2018. Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. 8th International Conference on Production Engineering and Management. Lemgo: Technische Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Springer, André ; Nothdurft, Sarah ; Lahdo, Rabi ; Seffer, Oliver: Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. Lemgo : Technische Hochschule Ostwestfalen-Lippe, 2018' havard: A. Springer, S. Nothdurft, R. Lahdo, O. Seffer, Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow, Technische Hochschule Ostwestfalen-Lippe, Lemgo, 2018. ieee: 'A. Springer, S. Nothdurft, R. Lahdo, and O. Seffer, Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. Lemgo: Technische Hochschule Ostwestfalen-Lippe, 2018.' mla: Springer, André, et al. “Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow.” 8th International Conference on Production Engineering and Management, Technische Hochschule Ostwestfalen-Lippe, 2018. short: A. Springer, S. Nothdurft, R. Lahdo, O. Seffer, Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow, Technische Hochschule Ostwestfalen-Lippe, Lemgo, 2018. ufg: 'Springer, André et. al. (2018): Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow, Lemgo.' van: 'Springer A, Nothdurft S, Lahdo R, Seffer O. Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow. 8th International Conference on Production Engineering and Management. Lemgo: Technische Hochschule Ostwestfalen-Lippe; 2018.' conference: end_date: 2018-10-05 location: Lemgo name: 8th International Conference start_date: 2018-10-04 date_created: 2019-02-13T13:42:56Z date_updated: 2023-03-15T13:49:59Z department: - _id: DEP1306 - _id: DEP7037 keyword: - Dissimilar metal joints - Laser processes - Multi-material components language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf oa: '1' place: Lemgo publication: 8th International Conference on Production Engineering and Management publication_identifier: isbn: - 978-3-946856-03-0 publication_status: published publisher: Technische Hochschule Ostwestfalen-Lippe related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf status: public title: Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow type: conference_editor_article user_id: '79260' year: 2018 ... --- _id: '7896' author: - first_name: Patrick full_name: Velte, Patrick last_name: Velte - first_name: Martin full_name: Stawinoga, Martin id: '68681' last_name: Stawinoga citation: ama: 'Velte P, Stawinoga M. Integrated reporting: The current state of empirical research, limitations and future research implications. Journal of Management Control. 2017;28:275-320. doi:10.1007/s00187-016-0235-4' apa: 'Velte, P., & Stawinoga, M. (2017). Integrated reporting: The current state of empirical research, limitations and future research implications. Journal of Management Control, 28, 275–320. https://doi.org/10.1007/s00187-016-0235-4' bjps: 'Velte P and Stawinoga M (2017) Integrated Reporting: The Current State of Empirical Research, Limitations and Future Research Implications. Journal of Management Control 28, 275–320.' chicago: 'Velte, Patrick, and Martin Stawinoga. “Integrated Reporting: The Current State of Empirical Research, Limitations and Future Research Implications.” Journal of Management Control 28 (2017): 275–320. https://doi.org/10.1007/s00187-016-0235-4.' chicago-de: 'Velte, Patrick und Martin Stawinoga. 2017. Integrated reporting: The current state of empirical research, limitations and future research implications. Journal of Management Control 28: 275–320. doi:10.1007/s00187-016-0235-4, .' din1505-2-1: 'Velte, Patrick ; Stawinoga, Martin: Integrated reporting: The current state of empirical research, limitations and future research implications. In: Journal of Management Control Bd. 28. Heidelberg, Springer (2017), S. 275–320' havard: 'P. Velte, M. Stawinoga, Integrated reporting: The current state of empirical research, limitations and future research implications, Journal of Management Control. 28 (2017) 275–320.' ieee: 'P. Velte and M. Stawinoga, “Integrated reporting: The current state of empirical research, limitations and future research implications,” Journal of Management Control, vol. 28, pp. 275–320, 2017.' mla: 'Velte, Patrick, and Martin Stawinoga. “Integrated Reporting: The Current State of Empirical Research, Limitations and Future Research Implications.” Journal of Management Control, vol. 28, Springer, 2017, pp. 275–320, doi:10.1007/s00187-016-0235-4.' short: P. Velte, M. Stawinoga, Journal of Management Control 28 (2017) 275–320. ufg: 'Velte, Patrick/Stawinoga, Martin (2017): Integrated reporting: The current state of empirical research, limitations and future research implications, in: Journal of Management Control 28, S. 275–320.' van: 'Velte P, Stawinoga M. Integrated reporting: The current state of empirical research, limitations and future research implications. Journal of Management Control. 2017;28:275–320.' date_created: 2022-05-03T07:05:39Z date_updated: 2023-03-15T13:50:12Z department: - _id: DEP1507 doi: 10.1007/s00187-016-0235-4 extern: '1' intvolume: ' 28' jel: - M41 keyword: - Integrated reporting Legitimization theory Institutional theory Behavioural decision theory Resource dependency theory Empirical research language: - iso: eng page: 275-320 place: Heidelberg publication: Journal of Management Control publication_identifier: issn: - 2191-4761 - 2191-477X publication_status: published publisher: Springer quality_controlled: '1' status: public title: 'Integrated reporting: The current state of empirical research, limitations and future research implications' type: scientific_journal_article user_id: '68681' volume: 28 year: 2017 ... --- _id: '593' abstract: - lang: eng text: Due to the increased individualization of customer demands in the last 20 years, the production systems are required to be more flexible and scalable. It is the samefor the material flow system with automated guided vehicles (AGVs). To realize the flexibility and scalability, it is recommended to decentralized control the vehicles. As an attempt, a concept of swarm intelligence with Radio Frequency Identification (RFID) is proposed and introduced in this article. The concept is supposed to be used for automated guided vehicle systems in which objects have to be transported from place to place. Therefore the object has to be self-organized and has to manage its own transport. In this context the vehicles have to choose the most optimal transportation. Swarm intelligence is a topic which deserves a high level of attention as a method to realize high flexibility and scalability. author: - first_name: Alisa Maria full_name: Cantauw, Alisa Maria id: '56638' last_name: Cantauw - first_name: Li full_name: Li, Li id: '58482' last_name: Li citation: ama: 'Cantauw AM, Li L. Application of Swarm Intelligence for Automated Guided Vehicle Systems. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Department of Production Engineering and Management. Lemgo; 2016:133-143.' apa: Cantauw, A. M., & Li, L. (2016). Application of Swarm Intelligence for Automated Guided Vehicle Systems. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Department of Production Engineering and Management (pp. 133–143). Lemgo. bjps: Cantauw AM and Li L (2016) Application of Swarm Intelligence for Automated Guided Vehicle Systems. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Department of Production Engineering and Management. Lemgo, pp. 133–143. chicago: Cantauw, Alisa Maria, and Li Li. “Application of Swarm Intelligence for Automated Guided Vehicle Systems.” In Department of Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 133–43. Lemgo, 2016. chicago-de: 'Cantauw, Alisa Maria und Li Li. 2016. Application of Swarm Intelligence for Automated Guided Vehicle Systems. In: Department of Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 133–143. Lemgo.' din1505-2-1: 'Cantauw, Alisa Maria ; Li, Li: Application of Swarm Intelligence for Automated Guided Vehicle Systems. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Department of Production Engineering and Management. Lemgo, 2016, S. 133–143' havard: 'A.M. Cantauw, L. Li, Application of Swarm Intelligence for Automated Guided Vehicle Systems, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Department of Production Engineering and Management, Lemgo, 2016: pp. 133–143.' ieee: A. M. Cantauw and L. Li, “Application of Swarm Intelligence for Automated Guided Vehicle Systems,” in Department of Production Engineering and Management, Lemgo, 2016, no. 1, pp. 133–143. mla: Cantauw, Alisa Maria, and Li Li. “Application of Swarm Intelligence for Automated Guided Vehicle Systems.” Department of Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2016, pp. 133–43. short: 'A.M. Cantauw, L. Li, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Department of Production Engineering and Management, Lemgo, 2016, pp. 133–143.' ufg: 'Cantauw, Alisa Maria/Li, Li (2016): Application of Swarm Intelligence for Automated Guided Vehicle Systems, in: Franz-Josef Villmer et. al. (Hgg.): Department of Production Engineering and Management, Lemgo, S. 133–143.' van: 'Cantauw AM, Li L. Application of Swarm Intelligence for Automated Guided Vehicle Systems. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Department of Production Engineering and Management. Lemgo; 2016. p. 133–43.' conference: end_date: 2016-09-30 location: Lemgo name: Proceedings 6th International Conference start_date: 2016-09-29 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T15:32:10Z date_updated: 2023-03-15T13:50:03Z department: - _id: DEP7000 - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Swarm intelligence - Automated guided vehicle system - RFID - Internet of things - Multi-agent system language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf oa: '1' page: 133-143 place: Lemgo publication: Department of Production Engineering and Management publication_identifier: isbn: - 978-3-946856-00-9 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf status: public title: Application of Swarm Intelligence for Automated Guided Vehicle Systems type: conference user_id: '45673' year: 2016 ... --- _id: '10066' abstract: - lang: eng text: Namibia is the most arid country in Sub-Saharan Africa. The Cuvelai-Etosha Basin (CEB) in central northern Namibia in particular is experiencing various ecological and social-ecological challenges such as high climate variability, saline groundwater, dependence on Angola for freshwater supply, high population growth and density, and increasing urbanisation. These challenges make water supply and management difficult and threaten the livelihood of the local population and the health of the ecosystem. Facing up to these challenges, the German-Namibian research project CuveWaters has developed, adapted and set up different technologies as pilot plant s. The Integrated Water Resources Management (IWRM) concept of CuveWaters is based on a multi-resource-mix in which water is obtained from different sources (rainwater, floodwater, groundwater and wastewater) and used for various purposes. High quality water is used as drinking water; water of a relatively low quality is used for irrigation. In cooperation with the residents of four villages and one small town, the project partners are implementing different technologies to collect and store, produce, treat and reuse water. The implemented technologies are rain- and floodwater harvesting, groundwater desalination, and the combination of sanitation, wastewater treatment and water reuse. The aim is to improve peoples’ livelihood through research on innovative and adapted solutions which contribute to a successful and adapted application of IWRM. To this end, the project integrates science, technology and societal aspects in a transdisciplinary research approach by linking scientific knowledge from natural, engineering and social sciences with the everyday practices and know-how of the stakeholders involved. Thus, the technical aspects are complemented by a wide range of societal and scientific components, such as capacity development, monitoring, participation or knowledge management. These ensure societal embedding of the technologies and knowledge transfer. This paper will illustrate the transdisciplinary approach, implemented technologies and accompanying measures as well as key results. author: - first_name: Stephan full_name: Lier, Stephan last_name: Lier - first_name: Maria full_name: Brenda, Maria last_name: Brenda - first_name: Peter full_name: Cornel, Peter last_name: Cornel - first_name: Juta full_name: Deffner, Juta last_name: Deffner - first_name: Jörg full_name: Felmeden, Jörg id: '81335' last_name: Felmeden - first_name: Alexander full_name: Jokisch, Alexander last_name: Jokisch - first_name: Thomas full_name: Kluge, Thomas last_name: Kluge - first_name: Katherina full_name: Müller, Katherina last_name: Müller - first_name: Julian full_name: Röhrig, Julian last_name: Röhrig - first_name: Vanessa full_name: Stibitz, Vanessa last_name: Stibitz - first_name: Wilhelm full_name: Urban, Wilhelm last_name: Urban citation: ama: 'Lier S, Brenda M, Cornel P, et al. From the Concept to the Tap - Integrated Water Resources Managment in Northern Namibia. In: Borchardt D, ed. Integrated Water Resources Management: Concept, Research and Implementation. Springer ; 2016:683-717. doi:https://doi.org/10.1007/978-3-319-25071-7_26' apa: 'Lier, S., Brenda, M., Cornel, P., Deffner, J., Felmeden, J., Jokisch, A., Kluge, T., Müller, K., Röhrig, J., Stibitz, V., & Urban, W. (2016). From the Concept to the Tap - Integrated Water Resources Managment in Northern Namibia. In D. Borchardt (Ed.), Integrated Water Resources Management: Concept, Research and Implementation (pp. 683–717). Springer . https://doi.org/10.1007/978-3-319-25071-7_26' bjps: 'Lier S et al. (2016) From the Concept to the Tap - Integrated Water Resources Managment in Northern Namibia. In Borchardt D (ed.), Integrated Water Resources Management: Concept, Research and Implementation. Cham: Springer , pp. 683–717.' chicago: 'Lier, Stephan, Maria Brenda, Peter Cornel, Juta Deffner, Jörg Felmeden, Alexander Jokisch, Thomas Kluge, et al. “From the Concept to the Tap - Integrated Water Resources Managment in Northern Namibia.” In Integrated Water Resources Management: Concept, Research and Implementation, edited by Dietrich Borchardt, 683–717. Cham: Springer , 2016. https://doi.org/10.1007/978-3-319-25071-7_26.' chicago-de: 'Lier, Stephan, Maria Brenda, Peter Cornel, Juta Deffner, Jörg Felmeden, Alexander Jokisch, Thomas Kluge, u. a. 2016. From the Concept to the Tap - Integrated Water Resources Managment in Northern Namibia. In: Integrated Water Resources Management: Concept, Research and Implementation, hg. von Dietrich Borchardt, 683–717. Cham: Springer . doi:https://doi.org/10.1007/978-3-319-25071-7_26, .' din1505-2-1: 'Lier, Stephan ; Brenda, Maria ; Cornel, Peter ; Deffner, Juta ; Felmeden, Jörg ; Jokisch, Alexander ; Kluge, Thomas ; Müller, Katherina ; u. a.: From the Concept to the Tap - Integrated Water Resources Managment in Northern Namibia. In: Borchardt, D. (Hrsg.): Integrated Water Resources Management: Concept, Research and Implementation. Cham : Springer , 2016, S. 683–717' havard: 'S. Lier, M. Brenda, P. Cornel, J. Deffner, J. Felmeden, A. Jokisch, T. Kluge, K. Müller, J. Röhrig, V. Stibitz, W. Urban, From the Concept to the Tap - Integrated Water Resources Managment in Northern Namibia, in: D. Borchardt (Ed.), Integrated Water Resources Management: Concept, Research and Implementation, Springer , Cham, 2016: pp. 683–717.' ieee: 'S. Lier et al., “From the Concept to the Tap - Integrated Water Resources Managment in Northern Namibia,” in Integrated Water Resources Management: Concept, Research and Implementation, D. Borchardt, Ed. Cham: Springer , 2016, pp. 683–717. doi: https://doi.org/10.1007/978-3-319-25071-7_26.' mla: 'Lier, Stephan, et al. “From the Concept to the Tap - Integrated Water Resources Managment in Northern Namibia.” Integrated Water Resources Management: Concept, Research and Implementation, edited by Dietrich Borchardt, Springer , 2016, pp. 683–717, https://doi.org/10.1007/978-3-319-25071-7_26.' short: 'S. Lier, M. Brenda, P. Cornel, J. Deffner, J. Felmeden, A. Jokisch, T. Kluge, K. Müller, J. Röhrig, V. Stibitz, W. Urban, in: D. Borchardt (Ed.), Integrated Water Resources Management: Concept, Research and Implementation, Springer , Cham, 2016, pp. 683–717.' ufg: 'Lier, Stephan u. a.: From the Concept to the Tap - Integrated Water Resources Managment in Northern Namibia, in: Borchardt, Dietrich (Hg.): Integrated Water Resources Management: Concept, Research and Implementation, Cham 2016,  S. 683–717.' van: 'Lier S, Brenda M, Cornel P, Deffner J, Felmeden J, Jokisch A, et al. From the Concept to the Tap - Integrated Water Resources Managment in Northern Namibia. In: Borchardt D, editor. Integrated Water Resources Management: Concept, Research and Implementation. Cham: Springer ; 2016. p. 683–717.' date_created: 2023-06-30T06:30:28Z date_updated: 2023-07-12T09:23:15Z department: - _id: DEP3021 doi: https://doi.org/10.1007/978-3-319-25071-7_26 editor: - first_name: Dietrich full_name: Borchardt, Dietrich last_name: Borchardt extern: '1' keyword: - Multi-resource-mix - Rainwater and floodwater harvesting - Solar-coupled groundwater desalination - Sanitation and water reuse - Transdisciplinarity language: - iso: eng page: 683–717 place: Cham publication: 'Integrated Water Resources Management: Concept, Research and Implementation' publication_identifier: eisbn: - 978-3-319-25071-7 isbn: - 978-3-319-79729-8 - 978-3-319-25069-4 publication_status: published publisher: 'Springer ' status: public title: From the Concept to the Tap - Integrated Water Resources Managment in Northern Namibia type: book_chapter user_id: '83781' year: '2016' ... --- _id: '597' abstract: - lang: eng text: "This paper is aimed to discuss current research using data mining techniques and industry statistics in production environments. The general research approach is based on the idea of using data mining processes and techniques of industry statistics to find rare and hidden patterns behind failures of complex components. A case study will be applied to illustrate how the technique is carried out and where the limits of this approach occur. The case study deals with a component supplier of printing machines, which received an increasing number of client complaints, all related to one distinct problem. The observed failures seem to occur only among clients with very high quality standards. The affected component undergoes a very complex production process with several steps in different departments. Every single production unit records data information from multiple process variables and at different points in time. In the beginning there was no understanding of the failure causes in production at all. Therefore a huge amount of production data had to be analyzed to find the pattern that discloses the failure.\r\nThe data mining process starts with a first step in which the given data sets are prepared and then cleaned. Followed up by building a prediction model. The aim is to detect the root causes for failures and to predict potential failures in affected components. This paper shows how to use data mining to get the answer on pressing production failures.\r\n" author: - first_name: Eva full_name: Scheideler, Eva id: '61522' last_name: Scheideler - first_name: Andrea full_name: Ahlemeyer-Stubbe, Andrea last_name: Ahlemeyer-Stubbe citation: ama: 'Scheideler E, Ahlemeyer-Stubbe A. Data Mining: A Potential Detector to Find Failure in Complex Components. In: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy. Hochschule Ostwestfalen-Lippe; 2015:163-174.' apa: 'Scheideler, E., & Ahlemeyer-Stubbe, A. (2015). Data Mining: A Potential Detector to Find Failure in Complex Components. In E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe (Eds.), Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy (Issue 1, pp. 163–174). Hochschule Ostwestfalen-Lippe.' bjps: 'Scheideler E and Ahlemeyer-Stubbe A (2015) Data Mining: A Potential Detector to Find Failure in Complex Components. In Padoano E et al. (eds), Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy. Lemgo: Hochschule Ostwestfalen-Lippe, pp. 163–174.' chicago: 'Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Data Mining: A Potential Detector to Find Failure in Complex Components.” In Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy, edited by Elio Padoano, Franz-Josef Villmer, Department of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, 163–74. Lemgo: Hochschule Ostwestfalen-Lippe, 2015.' chicago-de: 'Scheideler, Eva und Andrea Ahlemeyer-Stubbe. 2015. Data Mining: A Potential Detector to Find Failure in Complex Components. In: Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy, hg. von Elio Padoano, Franz-Josef Villmer, Department of Production Engineering and Management, und Hochschule Ostwestfalen-Lippe, 163–174. Lemgo: Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Scheideler, Eva ; Ahlemeyer-Stubbe, Andrea: Data Mining: A Potential Detector to Find Failure in Complex Components. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management ; Hochschule Ostwestfalen-Lippe (Hrsg.): Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy. Lemgo : Hochschule Ostwestfalen-Lippe, 2015, S. 163–174' havard: 'E. Scheideler, A. Ahlemeyer-Stubbe, Data Mining: A Potential Detector to Find Failure in Complex Components, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy, Hochschule Ostwestfalen-Lippe, Lemgo, 2015: pp. 163–174.' ieee: 'E. Scheideler and A. Ahlemeyer-Stubbe, “Data Mining: A Potential Detector to Find Failure in Complex Components,” in Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy, Trieste, Italy, 2015, no. 1, pp. 163–174.' mla: 'Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Data Mining: A Potential Detector to Find Failure in Complex Components.” Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy, edited by Elio Padoano et al., no. 1, Hochschule Ostwestfalen-Lippe, 2015, pp. 163–74.' short: 'E. Scheideler, A. Ahlemeyer-Stubbe, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy, Hochschule Ostwestfalen-Lippe, Lemgo, 2015, pp. 163–174.' ufg: 'Scheideler, Eva/Ahlemeyer-Stubbe, Andrea: Data Mining: A Potential Detector to Find Failure in Complex Components, in: Padoano, Elio u. a. (Hgg.): Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy, Lemgo 2015,  S. 163–174.' van: 'Scheideler E, Ahlemeyer-Stubbe A. Data Mining: A Potential Detector to Find Failure in Complex Components. In: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, editors. Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy. Lemgo: Hochschule Ostwestfalen-Lippe; 2015. p. 163–74.' conference: end_date: 2015-10-02 location: Trieste, Italy name: '5th International Conference "Production Engineering and Management" ' start_date: 2015-10-01 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-19T07:15:57Z date_updated: 2024-03-22T13:12:47Z department: - _id: DEP7000 - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer issue: '1' keyword: - Data mining - production failure - multi-variant analysis - multivariate process control - predictive modelling - case study language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf oa: '1' page: 163-174 place: Lemgo publication: 'Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy' publication_identifier: isbn: - 978-3-941645-11-0 publication_status: published publisher: Hochschule Ostwestfalen-Lippe related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf status: public title: 'Data Mining: A Potential Detector to Find Failure in Complex Components' type: conference user_id: '83781' year: '2015' ... --- _id: '4371' abstract: - lang: eng text: 'A major challenge in modern data-centric medicine is the increasing amount of time-dependent data, which requires efficient user-friendly solutions for dealing with such data. To create an effective and efficient knowledge discovery process, it is important to support common data manipulation tasks by creating quick, responsive and intuitive interaction methods. In this paper we describe some methods for interactive longitudinal data visualization with focus on the usage of mobile multi-touch devices as interaction medium, based on our design and development experiences. We argue that when it comes to longitudinal data this device category offers remarkable additional interaction benefits compared to standard point-and-click desktop computer devices. An important advantage of multi-touch devices arises when interacting with particularly large longitudinal data sets: Complex, coupled interactions such as zooming into a region and scrolling around almost simultaneously is more easily achieved with the possibilities of a multi-touch device than compared to a regular mouse-based interaction device.' author: - first_name: Andreas full_name: Holzinger, Andreas last_name: Holzinger - first_name: Michael full_name: Schwarz, Michael last_name: Schwarz - first_name: Bernhard full_name: Ofner, Bernhard last_name: Ofner - first_name: Fleur full_name: Jeanquartier, Fleur last_name: Jeanquartier - first_name: Andre full_name: Calero-Valdez, Andre last_name: Calero-Valdez - first_name: Carsten full_name: Röcker, Carsten id: '61525' last_name: Röcker - first_name: Martina full_name: Ziefle, Martina last_name: Ziefle citation: ama: 'Holzinger A, Schwarz M, Ofner B, et al. Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers. In: Teufel S, Min TA, You I, Weippl E, eds. Availability, Reliability, and Security in Information Systems . Vol 8708. Lecture Notes in Computer Science. Cham: Springer; 2014:124-137. doi:10.1007/978-3-319-10975-6_9' apa: 'Holzinger, A., Schwarz, M., Ofner, B., Jeanquartier, F., Calero-Valdez, A., Röcker, C., & Ziefle, M. (2014). Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers. In S. Teufel, T. A. Min, I. You, & E. Weippl (Eds.), Availability, Reliability, and Security in Information Systems (Vol. 8708, pp. 124–137). Cham: Springer. https://doi.org/10.1007/978-3-319-10975-6_9' bjps: 'Holzinger A et al. (2014) Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers. In Teufel S et al. (eds), Availability, Reliability, and Security in Information Systems , vol. 8708. Cham: Springer, pp. 124–137.' chicago: 'Holzinger, Andreas, Michael Schwarz, Bernhard Ofner, Fleur Jeanquartier, Andre Calero-Valdez, Carsten Röcker, and Martina Ziefle. “Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers.” In Availability, Reliability, and Security in Information Systems , edited by Stephanie Teufel, Tjoa A Min, Ilsun You, and Edgar Weippl, 8708:124–37. Lecture Notes in Computer Science. Cham: Springer, 2014. https://doi.org/10.1007/978-3-319-10975-6_9.' chicago-de: 'Holzinger, Andreas, Michael Schwarz, Bernhard Ofner, Fleur Jeanquartier, Andre Calero-Valdez, Carsten Röcker und Martina Ziefle. 2014. Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers. In: Availability, Reliability, and Security in Information Systems , hg. von Stephanie Teufel, Tjoa A Min, Ilsun You, und Edgar Weippl, 8708:124–137. Lecture Notes in Computer Science. Cham: Springer. doi:10.1007/978-3-319-10975-6_9, .' din1505-2-1: 'Holzinger, Andreas ; Schwarz, Michael ; Ofner, Bernhard ; Jeanquartier, Fleur ; Calero-Valdez, Andre ; Röcker, Carsten ; Ziefle, Martina: Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers. In: Teufel, S. ; Min, T. A. ; You, I. ; Weippl, E. (Hrsg.): Availability, Reliability, and Security in Information Systems , Lecture Notes in Computer Science. Bd. 8708. Cham : Springer, 2014, S. 124–137' havard: 'A. Holzinger, M. Schwarz, B. Ofner, F. Jeanquartier, A. Calero-Valdez, C. Röcker, M. Ziefle, Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers, in: S. Teufel, T.A. Min, I. You, E. Weippl (Eds.), Availability, Reliability, and Security in Information Systems , Springer, Cham, 2014: pp. 124–137.' ieee: A. Holzinger et al., “Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers,” in Availability, Reliability, and Security in Information Systems , Fribourg, Switzerland, 2014, vol. 8708, pp. 124–137. mla: Holzinger, Andreas, et al. “Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers.” Availability, Reliability, and Security in Information Systems , edited by Stephanie Teufel et al., vol. 8708, Springer, 2014, pp. 124–37, doi:10.1007/978-3-319-10975-6_9. short: 'A. Holzinger, M. Schwarz, B. Ofner, F. Jeanquartier, A. Calero-Valdez, C. Röcker, M. Ziefle, in: S. Teufel, T.A. Min, I. You, E. Weippl (Eds.), Availability, Reliability, and Security in Information Systems , Springer, Cham, 2014, pp. 124–137.' ufg: 'Holzinger, Andreas et. al. (2014): Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers, in: Stephanie Teufel et. al. (Hgg.): Availability, Reliability, and Security in Information Systems (=Lecture Notes in Computer Science 8708), Cham, S. 124–137.' van: 'Holzinger A, Schwarz M, Ofner B, Jeanquartier F, Calero-Valdez A, Röcker C, et al. Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers. In: Teufel S, Min TA, You I, Weippl E, editors. Availability, Reliability, and Security in Information Systems . Cham: Springer; 2014. p. 124–37. (Lecture Notes in Computer Science; vol. 8708).' conference: end_date: 2014-09-12 location: Fribourg, Switzerland name: 5 International Cross-Domain Conference, CD-ARES 2014 and 4th International Workshop on Security and Cognitive Informatics for Homeland Defense, SeCIHD 2014 start_date: 2014-09-08 date_created: 2021-01-14T10:13:18Z date_updated: 2023-03-15T13:49:52Z department: - _id: DEP5023 doi: 10.1007/978-3-319-10975-6_9 editor: - first_name: 'Stephanie ' full_name: 'Teufel, Stephanie ' last_name: Teufel - first_name: 'Tjoa A ' full_name: 'Min, Tjoa A ' last_name: Min - first_name: 'Ilsun ' full_name: 'You, Ilsun ' last_name: You - first_name: 'Edgar ' full_name: 'Weippl, Edgar ' last_name: Weippl intvolume: ' 8708' keyword: - Data Visualization - Longitudinal Data - Time Series - Multi-Touch - Mobile Computing language: - iso: eng main_file_link: - open_access: '1' oa: '1' page: 124 - 137 place: Cham publication: ' Availability, Reliability, and Security in Information Systems ' publication_identifier: eisbn: - 978-3-319-10975-6 isbn: - 978-3-319-10974-9 publication_status: published publisher: Springer series_title: Lecture Notes in Computer Science status: public title: Towards Interactive Visualization of Longitudinal Data to Support Knowledge Discovery on Multi-Touch Tablet Computers type: conference user_id: '15514' volume: 8708 year: 2014 ... --- _id: '1436' author: - first_name: Fabian full_name: Denninger, Fabian last_name: Denninger citation: ama: 'Denninger F. Konzeption und Entwicklung eines multimedialen Informationssystems auf Basis von Multitouch-Technologie am Beispiel der interaktiven Flash-Anwendung “Ökotouch”. Lemgo: Hochschule Ostwestfalen-Lippe; 2008.' apa: 'Denninger, F. (2008). Konzeption und Entwicklung eines multimedialen Informationssystems auf Basis von Multitouch-Technologie am Beispiel der interaktiven Flash-Anwendung “Ökotouch”. Lemgo: Hochschule Ostwestfalen-Lippe.' bjps: 'Denninger F (2008) Konzeption und Entwicklung eines multimedialen Informationssystems auf Basis von Multitouch-Technologie am Beispiel der interaktiven Flash-Anwendung ‘Ökotouch’. Lemgo: Hochschule Ostwestfalen-Lippe.' chicago: 'Denninger, Fabian. Konzeption und Entwicklung eines multimedialen Informationssystems auf Basis von Multitouch-Technologie am Beispiel der interaktiven Flash-Anwendung “Ökotouch”. Lemgo: Hochschule Ostwestfalen-Lippe, 2008.' chicago-de: 'Denninger, Fabian. 2008. Konzeption und Entwicklung eines multimedialen Informationssystems auf Basis von Multitouch-Technologie am Beispiel der interaktiven Flash-Anwendung „Ökotouch“. Lemgo: Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Denninger, Fabian: Konzeption und Entwicklung eines multimedialen Informationssystems auf Basis von Multitouch-Technologie am Beispiel der interaktiven Flash-Anwendung „Ökotouch“. Lemgo : Hochschule Ostwestfalen-Lippe, 2008' havard: F. Denninger, Konzeption und Entwicklung eines multimedialen Informationssystems auf Basis von Multitouch-Technologie am Beispiel der interaktiven Flash-Anwendung “Ökotouch”., Hochschule Ostwestfalen-Lippe, Lemgo, 2008. ieee: 'F. Denninger, Konzeption und Entwicklung eines multimedialen Informationssystems auf Basis von Multitouch-Technologie am Beispiel der interaktiven Flash-Anwendung “Ökotouch”. Lemgo: Hochschule Ostwestfalen-Lippe, 2008.' mla: Denninger, Fabian. Konzeption und Entwicklung eines multimedialen Informationssystems auf Basis von Multitouch-Technologie am Beispiel der interaktiven Flash-Anwendung “Ökotouch”. Hochschule Ostwestfalen-Lippe, 2008. short: F. Denninger, Konzeption und Entwicklung eines multimedialen Informationssystems auf Basis von Multitouch-Technologie am Beispiel der interaktiven Flash-Anwendung “Ökotouch”., Hochschule Ostwestfalen-Lippe, Lemgo, 2008. ufg: 'Denninger, Fabian (2008): Konzeption und Entwicklung eines multimedialen Informationssystems auf Basis von Multitouch-Technologie am Beispiel der interaktiven Flash-Anwendung „Ökotouch“., Lemgo.' van: 'Denninger F. Konzeption und Entwicklung eines multimedialen Informationssystems auf Basis von Multitouch-Technologie am Beispiel der interaktiven Flash-Anwendung “Ökotouch”. Lemgo: Hochschule Ostwestfalen-Lippe; 2008. 134 p.' date_created: 2019-06-12T09:18:56Z date_updated: 2023-03-15T13:49:36Z ddc: - '004' department: - _id: DEP2001 keyword: - Multi-Touch - Multitouch Multitouch language: - iso: ger page: '134' place: Lemgo publication_status: published publisher: Hochschule Ostwestfalen-Lippe status: public supervisor: - first_name: Guido full_name: Falkemeier, Guido id: '29084' last_name: Falkemeier title: Konzeption und Entwicklung eines multimedialen Informationssystems auf Basis von Multitouch-Technologie am Beispiel der interaktiven Flash-Anwendung "Ökotouch". type: bachelor_thesis user_id: '45673' year: 2008 ...