--- _id: '13339' abstract: - lang: eng text: Additive manufacturing (AM) paves the way for low-cost production of optical and terahertz (THz) components such as waveguides, fibers, and lenses [1]–[3]. This work addresses the fabrication and THz characterization of a 3D-printed waveguide composed of cyclic olefin copolymer (TOPAS). Such a waveguide is a convenient and inexpensive tool in the development of THz interconnects, and in applications such as biomedical sensing. author: - first_name: Suraj full_name: Joshi, Suraj last_name: Joshi - first_name: Annamarija full_name: Starsaja, Annamarija last_name: Starsaja - first_name: Abhijeet Narendra full_name: Shrotri, Abhijeet Narendra id: '74090' last_name: Shrotri orcid: 0000-0003-2116-156X - first_name: Oliver full_name: Stübbe, Oliver id: '51864' last_name: Stübbe orcid: 0000-0001-7293-6893 - first_name: Sascha full_name: Preu, Sascha last_name: Preu citation: ama: Joshi S, Starsaja A, Shrotri AN, Stübbe O, Preu S. Additively-Manufactured Terahertz Waveguides. IEEE; 2026. doi:10.1109/irmmw-thz61557.2025.11320095 apa: Joshi, S., Starsaja, A., Shrotri, A. N., Stübbe, O., & Preu, S. (2026). Additively-Manufactured Terahertz Waveguides. In 2025 50th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz). 50th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz), Helsinki, Finland . IEEE. https://doi.org/10.1109/irmmw-thz61557.2025.11320095 bjps: 'Joshi S et al. (2026) Additively-Manufactured Terahertz Waveguides. Piscataway, NJ: IEEE.' chicago: 'Joshi, Suraj, Annamarija Starsaja, Abhijeet Narendra Shrotri, Oliver Stübbe, and Sascha Preu. Additively-Manufactured Terahertz Waveguides. 2025 50th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz). Piscataway, NJ: IEEE, 2026. https://doi.org/10.1109/irmmw-thz61557.2025.11320095.' chicago-de: 'Joshi, Suraj, Annamarija Starsaja, Abhijeet Narendra Shrotri, Oliver Stübbe und Sascha Preu. 2026. Additively-Manufactured Terahertz Waveguides. 2025 50th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz). Piscataway, NJ: IEEE. doi:10.1109/irmmw-thz61557.2025.11320095, .' din1505-2-1: 'Joshi, Suraj ; Starsaja, Annamarija ; Shrotri, Abhijeet Narendra ; Stübbe, Oliver ; Preu, Sascha: Additively-Manufactured Terahertz Waveguides. Piscataway, NJ : IEEE, 2026' havard: S. Joshi, A. Starsaja, A.N. Shrotri, O. Stübbe, S. Preu, Additively-Manufactured Terahertz Waveguides, IEEE, Piscataway, NJ, 2026. ieee: 'S. Joshi, A. Starsaja, A. N. Shrotri, O. Stübbe, and S. Preu, Additively-Manufactured Terahertz Waveguides. Piscataway, NJ: IEEE, 2026. doi: 10.1109/irmmw-thz61557.2025.11320095.' mla: Joshi, Suraj, et al. “Additively-Manufactured Terahertz Waveguides.” 2025 50th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz), IEEE, 2026, https://doi.org/10.1109/irmmw-thz61557.2025.11320095. short: S. Joshi, A. Starsaja, A.N. Shrotri, O. Stübbe, S. Preu, Additively-Manufactured Terahertz Waveguides, IEEE, Piscataway, NJ, 2026. ufg: 'Joshi, Suraj u. a.: Additively-Manufactured Terahertz Waveguides, Piscataway, NJ 2026.' van: 'Joshi S, Starsaja A, Shrotri AN, Stübbe O, Preu S. Additively-Manufactured Terahertz Waveguides. 2025 50th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz). Piscataway, NJ: IEEE; 2026.' conference: end_date: 2025-08-22 location: 'Helsinki, Finland ' name: 50th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz) start_date: 2025-08-17 date_created: 2026-01-16T14:49:35Z date_updated: 2026-01-21T07:34:28Z department: - _id: DEP5020 - _id: DEP6020 doi: 10.1109/irmmw-thz61557.2025.11320095 keyword: - Optical fibers - Optical fiber sensors - Optical interconnections - Biomedical optical imaging - Optical device fabrication - Production - Optical waveguide components - Three-dimensional printing - Optical waveguides - Lenses language: - iso: eng place: Piscataway, NJ publication: 2025 50th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz) publication_status: published publisher: IEEE status: public title: Additively-Manufactured Terahertz Waveguides type: conference_editor_article user_id: '83781' year: '2026' ... --- _id: '12719' abstract: - lang: eng text: A human digital twin (HDT) is a virtual representation of a worker in cyberspace. Nevertheless, current research focusses mainly on HDTs for motoric work types, such as assembly. To fully integrate an HDT for workers in production, it is necessary that an HDT also displays cognitive processes like memorizing, thinking or reasoning. Such a concept can be used in information-based work, for example monitoring highly automated production systems, and contribute to the planning and control of production. Due to the high proportion of planning and decision-making processes, the efficiency of information-based work is determined in particular by the inner processes of the worker. An HDT can therefore help to describe current and future states of socio-technical work systems. Therefore, this paper presents a systematic literature review to explicitly derive the relevant components of an HDT for information-based work types. The elements of such an HDT and its environment are defined. Further, the current gaps in literature are identified. There are currently no real-world applications of such an HDT. Additionally, the value of multi-HDT systems must be evaluated more extensively. author: - first_name: Viktoria full_name: Mordaschew, Viktoria id: '79005' last_name: Mordaschew - first_name: Benedikt full_name: Latos, Benedikt id: '84474' last_name: Latos - first_name: Sven full_name: Tackenberg, Sven id: '71470' last_name: Tackenberg citation: ama: Mordaschew V, Latos B, Tackenberg S. A Human Digital Twin for Worker-Centric Production. Procedia Computer Science. 2025;253:2137-2146. doi:https://doi.org/10.1016/j.procs.2025.01.274 apa: Mordaschew, V., Latos, B., & Tackenberg, S. (2025). A Human Digital Twin for Worker-Centric Production. Procedia Computer Science, 253, 2137–2146. https://doi.org/10.1016/j.procs.2025.01.274 bjps: Mordaschew V, Latos B and Tackenberg S (2025) A Human Digital Twin for Worker-Centric Production. Procedia Computer Science 253, 2137–2146. chicago: 'Mordaschew, Viktoria, Benedikt Latos, and Sven Tackenberg. “A Human Digital Twin for Worker-Centric Production.” Procedia Computer Science 253 (2025): 2137–46. https://doi.org/10.1016/j.procs.2025.01.274.' chicago-de: 'Mordaschew, Viktoria, Benedikt Latos und Sven Tackenberg. 2025. A Human Digital Twin for Worker-Centric Production. Procedia Computer Science 253: 2137–2146. doi:https://doi.org/10.1016/j.procs.2025.01.274, .' din1505-2-1: 'Mordaschew, Viktoria ; Latos, Benedikt ; Tackenberg, Sven: A Human Digital Twin for Worker-Centric Production. In: Procedia Computer Science Bd. 253. Amsterdam [u.a.] , Elsevier (2025), S. 2137–2146' havard: V. Mordaschew, B. Latos, S. Tackenberg, A Human Digital Twin for Worker-Centric Production, Procedia Computer Science. 253 (2025) 2137–2146. ieee: 'V. Mordaschew, B. Latos, and S. Tackenberg, “A Human Digital Twin for Worker-Centric Production,” Procedia Computer Science, vol. 253, pp. 2137–2146, 2025, doi: https://doi.org/10.1016/j.procs.2025.01.274.' mla: Mordaschew, Viktoria, et al. “A Human Digital Twin for Worker-Centric Production.” Procedia Computer Science, vol. 253, 2025, pp. 2137–46, https://doi.org/10.1016/j.procs.2025.01.274. short: V. Mordaschew, B. Latos, S. Tackenberg, Procedia Computer Science 253 (2025) 2137–2146. ufg: 'Mordaschew, Viktoria/Latos, Benedikt/Tackenberg, Sven: A Human Digital Twin for Worker-Centric Production, in: Procedia Computer Science 253 (2025),  S. 2137–2146.' van: Mordaschew V, Latos B, Tackenberg S. A Human Digital Twin for Worker-Centric Production. Procedia Computer Science. 2025;253:2137–46. date_created: 2025-03-19T15:42:16Z date_updated: 2025-03-20T15:25:28Z department: - _id: DEP1500 doi: https://doi.org/10.1016/j.procs.2025.01.274 intvolume: ' 253' keyword: - Human-centric Production - Digital Twin - Systematic Literature Review language: - iso: eng main_file_link: - open_access: '1' url: https://pdf.sciencedirectassets.com/280203/1-s2.0-S1877050925X0003X/1-s2.0-S1877050925002820/main.pdf?X-Amz-Security-Token=IQoJb3JpZ2luX2VjECAaCXVzLWVhc3QtMSJHMEUCIQCf5kQu9Qr%2FPaWZOMmUyMsrFj8U0OTeGci9WwFRKvOC4gIgBa8ilRkd264I5%2FfOe%2FJMwvNc3cQ1jDt8wJcUIdPTdfEqswUIeBAFGgwwNTkwMDM1NDY4NjUiDKfD4vTsP8l575BscSqQBdaN09lRB973%2Bhd4ufVIhFw27Ohx%2FUPVSwOUefsN5C28R6CqOhF8DiP%2F2uLmz%2FP0AnXXRIOIU9Xo6jGS01m5JEQUa3nNGi8YJ8wTH4vqk0pOjczyIo6CZJWe2zwVPJVIvlfTEV1aBcggnpVmcBINCHhCQ20GVehLrEEaONMkGjoauiuvp%2B5GQRNaa0F%2FJuhCfsJO7KbRcA1OblcOezoMYk83RzISbfAI5FvDKWxZQhWCprKR35b%2F6s7lfY8fb34Ps%2BNsCYmKhTJlDLDQiFVQPPWUwJg9PJaW9CJxjvWWNXlOOpv0tC6JFHyGnTu6VyOsPqs8G%2BD0nTOJtE9C2AwrradO7sVKQu%2B3SubbOofB6RIbb7eP%2FJeCAN3UQ4wBJKDa2QzoZiqrGb1LUVPmuJgEDZmZNgdIiat3mvC3QsCowARjBq%2BX12qexIsGbLoKKwLj0XZyD1geFAULOxEO1prmNT8zdhXcCloLKivRqNRpHc9vXR8mnUPRY4SDQIiFjkwbGfiN7XIfU%2BUL31K5F4L%2FidNQcNNwxiW2JiZLKnd0Cd3YUYFLODxKrXvI3SboFa1aKhiwX4uba2qjCbu0VpSKGIn%2BdkaGfOWxGgEg2L6s6MWXs0%2BnIUYoYswyjYxyksWZTk2xk09FT%2FzZzcbV%2By3LDfI68M6Yl%2BI47d77Gw2Dl3i2QtpSSgE7KidmuP3V5QTNLcwQ6znfvdJ1GCEtg86RCRbhdIjqopU8zl6%2BH%2By%2B9Zsh8exwsS6wehDEsKBgtOsmXMRr3PIMVsVBZBvOsraGPdmR9%2BFF37YCd66MEc2RLxoWr0y2N7vz00YOlcSvpDR4MLZVSb9sFSBLDTcbdljUEJjFWI5lx4fXoYY6D43k1qzBMKG8674GOrEBPhb%2BOxSm119COf1hZVU9Ddv020oO9bIFU0RN%2BgW0Jn5aIEYvqvKyOjBIlgPe%2BsOxmje4KstmmeZdXNT1UYhFmal1oQ%2Fc6dU2N5e6BPyHNN1HFQEDPCg4VmTPqvA6AerHmcIv62dF2mbJmBlB%2FrchNqLbPCrVy61C9FIKZmBRAdEDMKOjdi0IwDgJ4Mci%2FTu%2FYKZthYyoTcZCmkmyk8hVJGTMyZsj0pGsTS79eyd00t6K&X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Date=20250319T153721Z&X-Amz-SignedHeaders=host&X-Amz-Expires=300&X-Amz-Credential=ASIAQ3PHCVTY5KE6SOXB%2F20250319%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Signature=8a9c4609a533337efabc8cf0808d3c276fbf5283eef7c3deb5ab723e49e72788&hash=1c87cbc6d5873de51b1b1ba6cab66fb8a783c2b9af8ef198f4c9b2504f659005&host=68042c943591013ac2b2430a89b270f6af2c76d8dfd086a07176afe7c76c2c61&pii=S1877050925002820&tid=spdf-72598068-bcf7-4dec-b3a9-3bde6d19d9f5&sid=c9f5630d128d5441213b35f764412ad9bb5bgxrqb&type=client&tsoh=d3d3LnNjaWVuY2VkaXJlY3QuY29t&rh=d3d3LnNjaWVuY2VkaXJlY3QuY29t&ua=1e0359535c0b5400015202&rr=922e0cf0ff4e7a5a&cc=de oa: '1' page: 2137-2146 place: 'Amsterdam [u.a.] ' publication: Procedia Computer Science publication_identifier: issn: - 1877-0509 publication_status: published publisher: Elsevier quality_controlled: '1' related_material: link: - relation: other url: 10.1016/j.procs.2025.01.274 status: public title: A Human Digital Twin for Worker-Centric Production type: scientific_journal_article user_id: '83781' volume: 253 year: '2025' ... --- _id: '12795' abstract: - lang: eng text: Including disabled workers in value-creating work processes is a fundamental and guaranteed human right and is, therefore, an essential goal of society. In Germany, sheltered workshops create the conditions for this inclusion since they are essential to companies' value chains. A central challenge is the inclusion of disabled workers in the value-creation processes, such as in manufacturing or assembly areas. The skills of disabled workers vary since they have individual impairments. Therefore, this paper presents a digital human model, a Human Digital Twin (HDT), for disabled workers. The model maps their skills and supports the production planning and assembly processes. (C) 2024 The Authors. Published by Elsevier B.V. author: - first_name: Viktoria full_name: Mordaschew, Viktoria id: '79005' last_name: Mordaschew - first_name: Sönke full_name: Duckwitz, Sönke id: '81325' last_name: Duckwitz - first_name: Sven full_name: Tackenberg, Sven id: '71470' last_name: Tackenberg citation: ama: Mordaschew V, Duckwitz S, Tackenberg S. A Human Digital Twin of Disabled Workers for Production Planning. Vol 232. (Longo F, Shen W, Padovano A, eds.). Elsevier BV; 2024:745-751. doi:10.1016/j.procs.2024.01.074 apa: Mordaschew, V., Duckwitz, S., & Tackenberg, S. (2024). A Human Digital Twin of Disabled Workers for Production Planning. In F. Longo, W. Shen, & A. Padovano (Eds.), 5th International Conference on Industry 4.0 and Smart Manufacturing (ISM) (Vol. 232, pp. 745–751). Elsevier BV. https://doi.org/10.1016/j.procs.2024.01.074 bjps: 'Mordaschew V, Duckwitz S and Tackenberg S (2024) A Human Digital Twin of Disabled Workers for Production Planning, Longo F, Shen W and Padovano A (eds). Amsterdam [u.a.]: Elsevier BV.' chicago: 'Mordaschew, Viktoria, Sönke Duckwitz, and Sven Tackenberg. A Human Digital Twin of Disabled Workers for Production Planning. Edited by F. Longo, W. Shen, and A. Padovano. 5th International Conference on Industry 4.0 and Smart Manufacturing (ISM). Vol. 232. Procedia Computer Science. Amsterdam [u.a.]: Elsevier BV, 2024. https://doi.org/10.1016/j.procs.2024.01.074.' chicago-de: 'Mordaschew, Viktoria, Sönke Duckwitz und Sven Tackenberg. 2024. A Human Digital Twin of Disabled Workers for Production Planning. Hg. von F. Longo, W. Shen, und A. Padovano. 5th International Conference on Industry 4.0 and Smart Manufacturing (ISM). Bd. 232. Procedia Computer Science. Amsterdam [u.a.]: Elsevier BV. doi:10.1016/j.procs.2024.01.074, .' din1505-2-1: 'Mordaschew, Viktoria ; Duckwitz, Sönke ; Tackenberg, Sven ; Longo, F. ; Shen, W. ; Padovano, A. (Hrsg.): A Human Digital Twin of Disabled Workers for Production Planning, Procedia Computer Science. Bd. 232. Amsterdam [u.a.] : Elsevier BV, 2024' havard: V. Mordaschew, S. Duckwitz, S. Tackenberg, A Human Digital Twin of Disabled Workers for Production Planning, Elsevier BV, Amsterdam [u.a.], 2024. ieee: 'V. Mordaschew, S. Duckwitz, and S. Tackenberg, A Human Digital Twin of Disabled Workers for Production Planning, vol. 232. Amsterdam [u.a.]: Elsevier BV, 2024, pp. 745–751. doi: 10.1016/j.procs.2024.01.074.' mla: Mordaschew, Viktoria, et al. “A Human Digital Twin of Disabled Workers for Production Planning.” 5th International Conference on Industry 4.0 and Smart Manufacturing (ISM), edited by F. Longo et al., vol. 232, Elsevier BV, 2024, pp. 745–51, https://doi.org/10.1016/j.procs.2024.01.074. short: V. Mordaschew, S. Duckwitz, S. Tackenberg, A Human Digital Twin of Disabled Workers for Production Planning, Elsevier BV, Amsterdam [u.a.], 2024. ufg: 'Mordaschew, Viktoria/Duckwitz, Sönke/Tackenberg, Sven: A Human Digital Twin of Disabled Workers for Production Planning, Bd. 232, hg. von Longo, F./Shen, W./Padovano, A., Amsterdam [u.a.] 2024 (Procedia Computer Science).' van: 'Mordaschew V, Duckwitz S, Tackenberg S. A Human Digital Twin of Disabled Workers for Production Planning. Longo F, Shen W, Padovano A, editors. 5th International Conference on Industry 4.0 and Smart Manufacturing (ISM). Amsterdam [u.a.]: Elsevier BV; 2024. (Procedia Computer Science; vol. 232).' conference: end_date: 2023-11-24 location: Lisbon, PORTUGAL name: 5th International Conference on Industry 4.0 and Smart Manufacturing (ISM) start_date: 2023-11-22 date_created: 2025-04-15T12:07:15Z date_updated: 2025-06-25T12:44:44Z department: - _id: DEP7020 doi: 10.1016/j.procs.2024.01.074 editor: - first_name: F. full_name: Longo, F. last_name: Longo - first_name: W. full_name: Shen, W. last_name: Shen - first_name: A. full_name: Padovano, A. last_name: Padovano intvolume: ' 232' keyword: - Human Digital Twin - Industry 4.0 - Sheltered Workshops - Production Planning language: - iso: eng page: 745-751 place: Amsterdam [u.a.] publication: 5th International Conference on Industry 4.0 and Smart Manufacturing (ISM) publication_identifier: issn: - 1877-0509 publication_status: published publisher: Elsevier BV series_title: Procedia Computer Science status: public title: A Human Digital Twin of Disabled Workers for Production Planning type: conference_editor_article user_id: '83781' volume: 232 year: '2024' ... --- _id: '10267' abstract: - lang: ger text: "Im Rahmen dieser Bachelorarbeit werden die cineastisch visuelle Gestaltung und die visuelle \r\nNarration in der Game-Engine Unreal untersucht. Das zentrale Ziel ist die Entwicklung einer \r\neigenen Bildsprache und Bildästhetik durch eine umfassende Analyse von Kriegsdramen \r\nund der Anwendung von Filmstock Emulation und Compositing-Methoden. In diesem \r\nKontext wird ein Anti-Kriegskurzfilm erstellt, der die erworbenen Techniken in die Praxis \r\numsetzt und die Möglichkeiten und Limitationen der cineastischen Erzählweise in der \r\nUnreal Engine aufzeigt. Die Arbeit befasst sich zunächst mit der aktuellen Entwicklung in \r\nder Filmindustrie, insbesondere in Bezug auf neue Technologien wie künstlicher Intelligenz \r\nund der fortschreitenden Automatisierung in der Film- und Medienproduktion. Es wird sich \r\ndarauffolgend mit den Herausforderungen von Echtzeitrendering-Engines beschäftigt. \r\nAnschließend erfolgt eine kurze historische Einordnung des Mediums Film, eine \r\ndifferenzierte Betrachtung der Unterschiede zwischen analogem und digitalem Film sowie \r\nder Funktionsweise von Filmkameras. Ein besonderer Fokus wird in diesem Zusammenhang \r\nauf die Nachstellung von Kameralinseneffekten und Filmstock Emulation gelegt. \r\n" alternative_title: - 'Visuelle Erzählung und cineastische Gestaltung in Echtzeitrendering-Umgebung ' author: - first_name: Thilo full_name: Letmathe, Thilo id: '75746' last_name: Letmathe citation: ama: Letmathe T. Die Macht des Bewegtbildes. Technische Hochschule Ostwestfalen-Lippe ; 2023. apa: Letmathe, T. (2023). Die Macht des Bewegtbildes. Technische Hochschule Ostwestfalen-Lippe . bjps: 'Letmathe T (2023) Die Macht des Bewegtbildes. Detmold: Technische Hochschule Ostwestfalen-Lippe .' chicago: 'Letmathe, Thilo. Die Macht des Bewegtbildes. Detmold: Technische Hochschule Ostwestfalen-Lippe , 2023.' chicago-de: 'Letmathe, Thilo. 2023. Die Macht des Bewegtbildes. Detmold: Technische Hochschule Ostwestfalen-Lippe .' din1505-2-1: 'Letmathe, Thilo: Die Macht des Bewegtbildes. Detmold : Technische Hochschule Ostwestfalen-Lippe , 2023' havard: T. Letmathe, Die Macht des Bewegtbildes, Technische Hochschule Ostwestfalen-Lippe , Detmold, 2023. ieee: 'T. Letmathe, Die Macht des Bewegtbildes. Detmold: Technische Hochschule Ostwestfalen-Lippe , 2023.' mla: Letmathe, Thilo. Die Macht des Bewegtbildes. Technische Hochschule Ostwestfalen-Lippe , 2023. short: T. Letmathe, Die Macht des Bewegtbildes, Technische Hochschule Ostwestfalen-Lippe , Detmold, 2023. ufg: 'Letmathe, Thilo: Die Macht des Bewegtbildes, Detmold 2023.' van: 'Letmathe T. Die Macht des Bewegtbildes. Detmold: Technische Hochschule Ostwestfalen-Lippe ; 2023. 124 p.' date_created: 2023-09-01T13:23:49Z date_updated: 2023-09-27T10:40:15Z ddc: - '770' department: - _id: DEP2001 file: - access_level: local content_type: application/pdf creator: zr4-ya6 date_created: 2023-09-26T20:03:25Z date_updated: 2023-09-27T10:40:13Z file_id: '10454' file_name: Bachelorthesis_Die_Macht_des_Bewegtbildes_Thilo_Letmathe_Matrikelnr. 15436053, 25.08.2023.pdf file_size: 5494017 relation: main_file title: 'Die Macht des Bewegtbildes ' file_date_updated: 2023-09-27T10:40:13Z has_accepted_license: '1' keyword: - Unreal Engine - Game Engine - Echtzeitrendering - Prozedural - Automatisierung - Künstliche Intelligenz (KI) - Virtual Film Production (VFP) - Computer-Generated Imagery (CGI) - Visual Effect (VFX) - Filmstock Emulation - DaVinci Resolve - Compositing - Kameralinseneffekte - analoger Film - visuelles Erzählen - Kinematographie - Filmografie - Bildsprache - Bildgestaltung - Artdirecting - Cineastik - Realismus - Environmental design - Krieg - Film - Kurzfilm - Filmanalyse und Filmhistorie language: - iso: ger page: '124' place: Detmold publisher: 'Technische Hochschule Ostwestfalen-Lippe ' status: public supervisor: - first_name: Rico full_name: Dober, Rico id: '76705' last_name: Dober - first_name: Guido full_name: Falkemeier, Guido id: '29084' last_name: Falkemeier title: Die Macht des Bewegtbildes type: bachelor_thesis user_id: '83778' year: '2023' ... --- _id: '10787' abstract: - lang: eng text: Cyber-physical production systems have emerged with the rise of Industry 4.0 in different industrial fields. Especially the food sector, where inhomogeneous input products like beer/yeast suspensions with different qualities and properties have yet slowed down automation, has potential for this evolution. This contribution presents optimization methods for a dynamical cross-flow filtration plant which is driven by an advanced control concept in combination with data driven product monitoring via inline near infrared spectroscopy (NIR) in order to improve energy savings and filtration performance. Using a hierarchical control and optimization structure, the non stationary batch process is steered towards a high production rate with low energy consumption for a variety of different input products. author: - first_name: Jörn full_name: Tebbe, Jörn id: '79072' last_name: Tebbe - first_name: Thomas full_name: Pawlik, Thomas id: '58915' last_name: Pawlik - first_name: Marc full_name: Trilling-Haasler, Marc id: '81622' last_name: Trilling-Haasler orcid: 0000-0002-3685-6383 - first_name: Jannis full_name: Löbner, Jannis id: '74097' last_name: Löbner - first_name: Markus full_name: Lange-Hegermann, Markus id: '71761' last_name: Lange-Hegermann - first_name: Jan full_name: Schneider, Jan id: '13209' last_name: Schneider orcid: 0000-0001-6401-8873 citation: ama: Tebbe J, Pawlik T, Trilling-Haasler M, Löbner J, Lange-Hegermann M, Schneider J. Holistic Optimization of a Dynamic Cross-Flow Filtration Process towards a Cyber-Physical System. (Jasperneite J, Wisniewski L, Fung Man K, Institute of Electrical and Electronics Engineers , eds.). IEEE; 2023:1-7. doi:10.1109/INDIN51400.2023.10217913 apa: Tebbe, J., Pawlik, T., Trilling-Haasler, M., Löbner, J., Lange-Hegermann, M., & Schneider, J. (2023). Holistic optimization of a dynamic cross-flow filtration process towards a cyber-physical system. In J. Jasperneite, L. Wisniewski, K. Fung Man, & Institute of Electrical and Electronics Engineers (Eds.), 2023 IEEE 21st International Conference on Industrial Informatics (INDIN) (pp. 1–7). IEEE. https://doi.org/10.1109/INDIN51400.2023.10217913 bjps: 'Tebbe J et al. (2023) Holistic Optimization of a Dynamic Cross-Flow Filtration Process towards a Cyber-Physical System, Jasperneite J et al. (eds). [Piscataway, NJ]: IEEE.' chicago: 'Tebbe, Jörn, Thomas Pawlik, Marc Trilling-Haasler, Jannis Löbner, Markus Lange-Hegermann, and Jan Schneider. Holistic Optimization of a Dynamic Cross-Flow Filtration Process towards a Cyber-Physical System. Edited by Jürgen Jasperneite, Lukasz Wisniewski, Kim Fung Man, and Institute of Electrical and Electronics Engineers . 2023 IEEE 21st International Conference on Industrial Informatics (INDIN). [Piscataway, NJ]: IEEE, 2023. https://doi.org/10.1109/INDIN51400.2023.10217913.' chicago-de: 'Tebbe, Jörn, Thomas Pawlik, Marc Trilling-Haasler, Jannis Löbner, Markus Lange-Hegermann und Jan Schneider. 2023. Holistic optimization of a dynamic cross-flow filtration process towards a cyber-physical system. Hg. von Jürgen Jasperneite, Lukasz Wisniewski, Kim Fung Man, und Institute of Electrical and Electronics Engineers . 2023 IEEE 21st International Conference on Industrial Informatics (INDIN). [Piscataway, NJ]: IEEE. doi:10.1109/INDIN51400.2023.10217913, .' din1505-2-1: 'Tebbe, Jörn ; Pawlik, Thomas ; Trilling-Haasler, Marc ; Löbner, Jannis ; Lange-Hegermann, Markus ; Schneider, Jan ; Jasperneite, J. ; Wisniewski, L. ; Fung Man, K. ; Institute of Electrical and Electronics Engineers (Hrsg.): Holistic optimization of a dynamic cross-flow filtration process towards a cyber-physical system. [Piscataway, NJ] : IEEE, 2023' havard: J. Tebbe, T. Pawlik, M. Trilling-Haasler, J. Löbner, M. Lange-Hegermann, J. Schneider, Holistic optimization of a dynamic cross-flow filtration process towards a cyber-physical system, IEEE, [Piscataway, NJ], 2023. ieee: 'J. Tebbe, T. Pawlik, M. Trilling-Haasler, J. Löbner, M. Lange-Hegermann, and J. Schneider, Holistic optimization of a dynamic cross-flow filtration process towards a cyber-physical system. [Piscataway, NJ]: IEEE, 2023, pp. 1–7. doi: 10.1109/INDIN51400.2023.10217913.' mla: Tebbe, Jörn, et al. “Holistic Optimization of a Dynamic Cross-Flow Filtration Process towards a Cyber-Physical System.” 2023 IEEE 21st International Conference on Industrial Informatics (INDIN), edited by Jürgen Jasperneite et al., IEEE, 2023, pp. 1–7, https://doi.org/10.1109/INDIN51400.2023.10217913. short: J. Tebbe, T. Pawlik, M. Trilling-Haasler, J. Löbner, M. Lange-Hegermann, J. Schneider, Holistic Optimization of a Dynamic Cross-Flow Filtration Process towards a Cyber-Physical System, IEEE, [Piscataway, NJ], 2023. ufg: 'Tebbe, Jörn u. a.: Holistic optimization of a dynamic cross-flow filtration process towards a cyber-physical system, hg. von Jasperneite, Jürgen u. a., [Piscataway, NJ] 2023.' van: 'Tebbe J, Pawlik T, Trilling-Haasler M, Löbner J, Lange-Hegermann M, Schneider J. Holistic optimization of a dynamic cross-flow filtration process towards a cyber-physical system. Jasperneite J, Wisniewski L, Fung Man K, Institute of Electrical and Electronics Engineers , editors. 2023 IEEE 21st International Conference on Industrial Informatics (INDIN). [Piscataway, NJ]: IEEE; 2023.' conference: end_date: 2023-07-20 location: Lemgo name: 21st International Conference on Industrial Informatics ; INDIN 2023 start_date: 2023-07-17 corporate_editor: - 'Institute of Electrical and Electronics Engineers ' date_created: 2023-11-21T08:04:41Z date_updated: 2025-06-26T07:48:22Z department: - _id: DEP4018 - _id: DEP1308 - _id: DEP4028 doi: 10.1109/INDIN51400.2023.10217913 editor: - first_name: Jürgen full_name: Jasperneite, Jürgen id: '1899' last_name: Jasperneite - first_name: Lukasz full_name: Wisniewski, Lukasz id: '1710' last_name: Wisniewski - first_name: Kim full_name: Fung Man, Kim last_name: Fung Man keyword: - Spectroscopy - Production systems - Filtration - Velocity control - Optimization methods - Cyber-physical systems - Nonhomogeneous media language: - iso: eng page: 1-7 place: '[Piscataway, NJ]' publication: 2023 IEEE 21st International Conference on Industrial Informatics (INDIN) publication_identifier: eisbn: - 978-1-6654-9313-0 isbn: - '978-1-6654-9314-7 ' issn: - 1935-4576 publication_status: published publisher: IEEE status: public title: Holistic optimization of a dynamic cross-flow filtration process towards a cyber-physical system type: conference_editor_article user_id: '83781' year: '2023' ... --- _id: '12806' abstract: - lang: eng text: Cyber-Physical Systems (CPS) play an essential role in today’s production processes, leveraging Artificial Intelligence (AI) to enhance operations such as optimization, anomaly detection, and predictive maintenance. This article reviews a cognitive architecture for Artificial Intelligence, which has been developed to establish a standard framework for integrating AI solutions into existing production processes. Given that machines in these processes continuously generate large streams of data, Online Machine Learning (OML) is identified as a crucial extension to the existing architecture. To substantiate this claim, real-world experiments using a slitting machine are conducted, to compare the performance of OML to traditional Batch Machine Learning. The assessment of contemporary OML algorithms using a real production system is a fundamental innovation in this research. The evaluations clearly indicate that OML adds significant value to CPS, and it is strongly recommended as an extension of related architectures, such as the cognitive architecture for AI discussed in this article. Additionally, surrogate-model-based optimization is employed, to determine the optimal hyperparameter settings for the corresponding OML algorithms, aiming to achieve peak performance in their respective tasks. article_number: '11506' author: - first_name: Alexander full_name: Hinterleitner, Alexander last_name: Hinterleitner - first_name: Richard full_name: Schulz, Richard last_name: Schulz - first_name: Lukas full_name: Hans, Lukas last_name: Hans - first_name: Aleksandr full_name: Subbotin, Aleksandr last_name: Subbotin - first_name: Nils full_name: Barthel, Nils last_name: Barthel - first_name: Noah full_name: Pütz, Noah last_name: Pütz - first_name: Martin full_name: Rosellen, Martin last_name: Rosellen - first_name: Thomas full_name: Bartz-Beielstein, Thomas last_name: Bartz-Beielstein - first_name: Christoph full_name: Geng, Christoph id: '61408' last_name: Geng - first_name: Phillip full_name: Priss, Phillip last_name: Priss citation: ama: 'Hinterleitner A, Schulz R, Hans L, et al. Online Machine Learning and Surrogate-Model-Based Optimization for Improved Production Processes Using a Cognitive Architecture.   Applied Sciences : open access journal. 2023;13(20). doi:10.3390/app132011506' apa: 'Hinterleitner, A., Schulz, R., Hans, L., Subbotin, A., Barthel, N., Pütz, N., Rosellen, M., Bartz-Beielstein, T., Geng, C., & Priss, P. (2023). Online Machine Learning and Surrogate-Model-Based Optimization for Improved Production Processes Using a Cognitive Architecture.   Applied Sciences : Open Access Journal, 13(20), Article 11506. https://doi.org/10.3390/app132011506' bjps: 'Hinterleitner A et al. (2023) Online Machine Learning and Surrogate-Model-Based Optimization for Improved Production Processes Using a Cognitive Architecture.   Applied Sciences : open access journal 13.' chicago: 'Hinterleitner, Alexander, Richard Schulz, Lukas Hans, Aleksandr Subbotin, Nils Barthel, Noah Pütz, Martin Rosellen, Thomas Bartz-Beielstein, Christoph Geng, and Phillip Priss. “Online Machine Learning and Surrogate-Model-Based Optimization for Improved Production Processes Using a Cognitive Architecture.”   Applied Sciences : Open Access Journal 13, no. 20 (2023). https://doi.org/10.3390/app132011506.' chicago-de: 'Hinterleitner, Alexander, Richard Schulz, Lukas Hans, Aleksandr Subbotin, Nils Barthel, Noah Pütz, Martin Rosellen, Thomas Bartz-Beielstein, Christoph Geng und Phillip Priss. 2023. Online Machine Learning and Surrogate-Model-Based Optimization for Improved Production Processes Using a Cognitive Architecture.   Applied Sciences : open access journal 13, Nr. 20. doi:10.3390/app132011506, .' din1505-2-1: 'Hinterleitner, Alexander ; Schulz, Richard ; Hans, Lukas ; Subbotin, Aleksandr ; Barthel, Nils ; Pütz, Noah ; Rosellen, Martin ; Bartz-Beielstein, Thomas ; u. a.: Online Machine Learning and Surrogate-Model-Based Optimization for Improved Production Processes Using a Cognitive Architecture. In:   Applied Sciences : open access journal Bd. 13. Basel, MDPI AG (2023), Nr. 20' havard: 'A. Hinterleitner, R. Schulz, L. Hans, A. Subbotin, N. Barthel, N. Pütz, M. Rosellen, T. Bartz-Beielstein, C. Geng, P. Priss, Online Machine Learning and Surrogate-Model-Based Optimization for Improved Production Processes Using a Cognitive Architecture,   Applied Sciences : Open Access Journal. 13 (2023).' ieee: 'A. Hinterleitner et al., “Online Machine Learning and Surrogate-Model-Based Optimization for Improved Production Processes Using a Cognitive Architecture,”   Applied Sciences : open access journal, vol. 13, no. 20, Art. no. 11506, 2023, doi: 10.3390/app132011506.' mla: 'Hinterleitner, Alexander, et al. “Online Machine Learning and Surrogate-Model-Based Optimization for Improved Production Processes Using a Cognitive Architecture.”   Applied Sciences : Open Access Journal, vol. 13, no. 20, 11506, 2023, https://doi.org/10.3390/app132011506.' short: 'A. Hinterleitner, R. Schulz, L. Hans, A. Subbotin, N. Barthel, N. Pütz, M. Rosellen, T. Bartz-Beielstein, C. Geng, P. Priss,   Applied Sciences : Open Access Journal 13 (2023).' ufg: 'Hinterleitner, Alexander u. a.: Online Machine Learning and Surrogate-Model-Based Optimization for Improved Production Processes Using a Cognitive Architecture, in:   Applied Sciences : open access journal 13 (2023), H. 20.' van: 'Hinterleitner A, Schulz R, Hans L, Subbotin A, Barthel N, Pütz N, et al. Online Machine Learning and Surrogate-Model-Based Optimization for Improved Production Processes Using a Cognitive Architecture.   Applied Sciences : open access journal. 2023;13(20).' date_created: 2025-04-16T07:27:52Z date_updated: 2025-06-26T07:50:56Z department: - _id: DEP5023 doi: 10.3390/app132011506 external_id: isi: - '001096019200001' intvolume: ' 13' isi: '1' issue: '20' keyword: - machine learning - online algorithms - cyber-physical production systems - surrogate-based optimization language: - iso: eng place: Basel publication: ' Applied Sciences : open access journal' publication_identifier: issn: - 2076-3417 publication_status: published publisher: MDPI AG status: public title: Online Machine Learning and Surrogate-Model-Based Optimization for Improved Production Processes Using a Cognitive Architecture type: scientific_journal_article user_id: '83781' volume: 13 year: '2023' ... --- _id: '13012' abstract: - lang: eng text: The aim of the study is to provide an up-to date overall evaluation of visual contamination occurring on the slaughter line in order to provide a basis for implementing contamination control measures and to the hygienic quality of the processes. For this purpose, 627 contaminated pig carcasses in an industrial slaughterhouse in north western Germany were examined in 2021 for its distribution of type, areal extent and localization of slaughter contamination. Prior to official meat inspection, two persons visually scanned dorsal and ventral surfaces of the eviscerated but not yet split pig carcasses from cranial to caudal and recorded types, areal extent and localization of the contamination. The main contamination type were intestinal contents, bile, stomach contents, tubular rail fat and “others”, which mostly consisted of a reddish foam from the respiratory tract. 103 out of 627 contaminated animals showed more than one contamination, which leads to a total number of 754 contaminations detected. Intestinal contents accounted for almost half of all contaminations and “others” for 30%. Forelimb, back and ham together counted for 70% of the contaminated regions. The affected area was smaller than that of a one euro coin (diameter about 23 mm) in 86% of the cases. article_number: '109365' author: - first_name: Janna full_name: Tholen, Janna id: '80924' last_name: Tholen - first_name: J. full_name: Grosse-Kleimann, J. last_name: Grosse-Kleimann - first_name: G. full_name: Schulze Althoff, G. last_name: Schulze Althoff - first_name: L. full_name: Kreienbrock, L. last_name: Kreienbrock - first_name: Matthias full_name: Upmann, Matthias id: '12666' last_name: Upmann citation: ama: Tholen J, Grosse-Kleimann J, Schulze Althoff G, Kreienbrock L, Upmann M. Type, areal extent and localization of carcass contaminations during industrial pig slaughter. Meat Science. 2023;208(2). doi:10.1016/j.meatsci.2023.109365 apa: Tholen, J., Grosse-Kleimann, J., Schulze Althoff, G., Kreienbrock, L., & Upmann, M. (2023). Type, areal extent and localization of carcass contaminations during industrial pig slaughter. Meat Science, 208(2), Article 109365. https://doi.org/10.1016/j.meatsci.2023.109365 bjps: Tholen J et al. (2023) Type, Areal Extent and Localization of Carcass Contaminations during Industrial Pig Slaughter. Meat Science 208. chicago: Tholen, Janna, J. Grosse-Kleimann, G. Schulze Althoff, L. Kreienbrock, and Matthias Upmann. “Type, Areal Extent and Localization of Carcass Contaminations during Industrial Pig Slaughter.” Meat Science 208, no. 2 (2023). https://doi.org/10.1016/j.meatsci.2023.109365. chicago-de: Tholen, Janna, J. Grosse-Kleimann, G. Schulze Althoff, L. Kreienbrock und Matthias Upmann. 2023. Type, areal extent and localization of carcass contaminations during industrial pig slaughter. Meat Science 208, Nr. 2. doi:10.1016/j.meatsci.2023.109365, . din1505-2-1: 'Tholen, Janna ; Grosse-Kleimann, J. ; Schulze Althoff, G. ; Kreienbrock, L. ; Upmann, Matthias: Type, areal extent and localization of carcass contaminations during industrial pig slaughter. In: Meat Science Bd. 208. London [u.a.], Elsevier BV (2023), Nr. 2' havard: J. Tholen, J. Grosse-Kleimann, G. Schulze Althoff, L. Kreienbrock, M. Upmann, Type, areal extent and localization of carcass contaminations during industrial pig slaughter, Meat Science. 208 (2023). ieee: 'J. Tholen, J. Grosse-Kleimann, G. Schulze Althoff, L. Kreienbrock, and M. Upmann, “Type, areal extent and localization of carcass contaminations during industrial pig slaughter,” Meat Science, vol. 208, no. 2, Art. no. 109365, 2023, doi: 10.1016/j.meatsci.2023.109365.' mla: Tholen, Janna, et al. “Type, Areal Extent and Localization of Carcass Contaminations during Industrial Pig Slaughter.” Meat Science, vol. 208, no. 2, 109365, 2023, https://doi.org/10.1016/j.meatsci.2023.109365. short: J. Tholen, J. Grosse-Kleimann, G. Schulze Althoff, L. Kreienbrock, M. Upmann, Meat Science 208 (2023). ufg: 'Tholen, Janna u. a.: Type, areal extent and localization of carcass contaminations during industrial pig slaughter, in: Meat Science 208 (2023), H. 2.' van: Tholen J, Grosse-Kleimann J, Schulze Althoff G, Kreienbrock L, Upmann M. Type, areal extent and localization of carcass contaminations during industrial pig slaughter. Meat Science. 2023;208(2). date_created: 2025-06-24T12:08:29Z date_updated: 2025-06-25T12:40:42Z department: - _id: DEP4029 doi: 10.1016/j.meatsci.2023.109365 external_id: isi: - '001111539700001' pmid: - '37939509' intvolume: ' 208' isi: '1' issue: '2' keyword: - Abattoir - Slaughter hygiene - Evisceration - Pork production - Pig carcass contamination - Fecal contamination - Bile contamination - Meat inspection language: - iso: eng place: London [u.a.] pmid: '1' publication: Meat Science publication_identifier: eissn: - 1873-4138 issn: - 0309-1740 publication_status: published publisher: Elsevier BV quality_controlled: '1' status: public title: Type, areal extent and localization of carcass contaminations during industrial pig slaughter type: scientific_journal_article user_id: '83781' volume: 208 year: '2023' ... --- _id: '7147' abstract: - lang: eng text: "Purpose: Industry 4.0 technologies influence how production is planned, scheduled, and controlled. In literature, different classifications of the tasks and functions of production planning and control (PPC) exist, of which one is the German Aachen PPC model. This research aims to identify and classify current Industry 4.0 approaches for planning and controlling production processes and to reveal researched and unexplored areas of the model.\r\n\r\nDesign/methodology/approach: In an exploratory literature review, we review and classify 48 publications on a full-text basis with the Aachen PPC model's tasks and functions. Two cluster analyses reveal researched and unexplored tasks and functions of the Aachen PPC model. Additionally, we give a summary of each reviewed publication.\r\n\r\nFindings: We propose a cyber-physical PPC architecture, which incorporates current Industry 4.0 technologies, current optimization methods, optimization objectives, and disturbances relevant for realizing a PPC system in a smart factory. Current approaches focus on the in-house PPC, particularly on the control using real-time information from the shop floor. We propose future research directions for the unexplored tasks and functions of the Aachen PPC model.\r\n\r\nResearch limitations/implications: The selection of search terms and the texts' interpretation is based on an individual assessment. The revelation of unexplored tasks and functions of the Aachen PPC model might have a different outcome if the search term combination is parameterized differently.\r\n\r\nOriginality/value: Using the Aachen PPC model, which holistically models PPC, the findings give comprehensive insights into the current advances of tools, methods, and challenges relevant to planning and controlling production processes under Industry 4.0." article_number: 4-30 author: - first_name: Jan-Phillip full_name: Herrmann, Jan-Phillip id: '75846' last_name: Herrmann - first_name: Sven full_name: Tackenberg, Sven id: '71470' last_name: Tackenberg - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Thilo full_name: Gamber, Thilo id: '71451' last_name: Gamber citation: ama: 'Herrmann JP, Tackenberg S, Padoano E, Gamber T. Approaches of production planning and control under industry 4.0: A literature review. Journal of Industrial Engineering and Management. 2022;15(1). doi:http://dx.doi.org/10.3926/jiem.3582' apa: 'Herrmann, J.-P., Tackenberg, S., Padoano, E., & Gamber, T. (2022). Approaches of production planning and control under industry 4.0: A literature review. Journal of Industrial Engineering and Management, 15(1), Article 4–30. http://dx.doi.org/10.3926/jiem.3582' bjps: 'Herrmann J-P et al. (2022) Approaches of Production Planning and Control under Industry 4.0: A Literature Review. Journal of Industrial Engineering and Management 15.' chicago: 'Herrmann, Jan-Phillip, Sven Tackenberg, Elio Padoano, and Thilo Gamber. “Approaches of Production Planning and Control under Industry 4.0: A Literature Review.” Journal of Industrial Engineering and Management 15, no. 1 (2022). http://dx.doi.org/10.3926/jiem.3582.' chicago-de: 'Herrmann, Jan-Phillip, Sven Tackenberg, Elio Padoano und Thilo Gamber. 2022. Approaches of production planning and control under industry 4.0: A literature review. Journal of Industrial Engineering and Management 15, Nr. 1. doi:http://dx.doi.org/10.3926/jiem.3582, .' din1505-2-1: 'Herrmann, Jan-Phillip ; Tackenberg, Sven ; Padoano, Elio ; Gamber, Thilo: Approaches of production planning and control under industry 4.0: A literature review. In: Journal of Industrial Engineering and Management Bd. 15. Barcelona‎, OmniaScience (2022), Nr. 1' havard: 'J.-P. Herrmann, S. Tackenberg, E. Padoano, T. Gamber, Approaches of production planning and control under industry 4.0: A literature review, Journal of Industrial Engineering and Management. 15 (2022).' ieee: 'J.-P. Herrmann, S. Tackenberg, E. Padoano, and T. Gamber, “Approaches of production planning and control under industry 4.0: A literature review,” Journal of Industrial Engineering and Management, vol. 15, no. 1, Art. no. 4–30, 2022, doi: http://dx.doi.org/10.3926/jiem.3582.' mla: 'Herrmann, Jan-Phillip, et al. “Approaches of Production Planning and Control under Industry 4.0: A Literature Review.” Journal of Industrial Engineering and Management, vol. 15, no. 1, 4–30, 2022, http://dx.doi.org/10.3926/jiem.3582.' short: J.-P. Herrmann, S. Tackenberg, E. Padoano, T. Gamber, Journal of Industrial Engineering and Management 15 (2022). ufg: 'Herrmann, Jan-Phillip u. a.: Approaches of production planning and control under industry 4.0: A literature review, in: Journal of Industrial Engineering and Management 15 (2022), H. 1.' van: 'Herrmann JP, Tackenberg S, Padoano E, Gamber T. Approaches of production planning and control under industry 4.0: A literature review. Journal of Industrial Engineering and Management. 2022;15(1).' date_created: 2022-03-22T10:01:45Z date_updated: 2024-08-05T08:46:11Z department: - _id: DEP7020 - _id: DEP1305 doi: http://dx.doi.org/10.3926/jiem.3582 intvolume: ' 15' issue: '1' keyword: - Production planning and control - Industry 4.0 - Industrial Internet of Things - Exploratory literature review language: - iso: eng main_file_link: - open_access: '1' url: http://www.jiem.org/index.php/jiem/article/view/3582/996 oa: '1' place: Barcelona‎ publication: Journal of Industrial Engineering and Management publication_identifier: eissn: - 2013-0953 issn: - 2013-8423 publication_status: published publisher: ' OmniaScience' quality_controlled: '1' status: public title: 'Approaches of production planning and control under industry 4.0: A literature review' type: scientific_journal_article user_id: '83781' volume: 15 year: '2022' ... --- _id: '12833' abstract: - lang: eng text: In Northwestern Europe, Germany, France, the Netherlands, the UK and Belgium constitute the biggest five potato producers, with total potato crop production around 60% of EU-28 production before Brexit. Soil and climate conditions are highly favourable for potato growth in this region. Production is under driving forces of (i) the potato processing industry, particularly in Belgium; (ii) the innovation for fresh potato in the UK, France and Germany; (iii) the leadership of Germany and the Netherlands for starch potato; and (iv) the dominance of the Netherlands for seed production. Based on an industrial agri-food production system, the region has the highest potato yield levels worldwide and developed relevant trade networks for export of seed, fresh and processed potato products in and outside Europe. Conventional and intensive potato production is widespread over the region, whilst organic production started to develop in Germany and France. Whether the coming decades will be as successful as the last ones for sustainable potato production will depend on how the sector and stakeholders of the whole potato value-chain will overcome new issues and challenges. These are mainly soil quality and health conservation, consequences of climate change, increasing bans on the use of plant protection products, tightening environmental standards, food waste reduction and increasing trade tensions hampering the flow of potatoes around the world. After a detailed description of the potato production in the region, this paper contains a SWOT analysis aiming to identify potential solutions to overcome environmental, technical, economic, political and societal issues in the region for sustainable potato production in the coming years and decades. author: - first_name: Jean-Pierre full_name: Goffart, Jean-Pierre last_name: Goffart - first_name: Anton full_name: Haverkort, Anton last_name: Haverkort - first_name: Michael full_name: Storey, Michael last_name: Storey - first_name: Norbert full_name: Haase, Norbert id: '58390' last_name: Haase - first_name: Michel full_name: Martin, Michel last_name: Martin - first_name: Pierre full_name: Lebrun, Pierre last_name: Lebrun - first_name: Daniel full_name: Ryckmans, Daniel last_name: Ryckmans - first_name: Dominique full_name: Florins, Dominique last_name: Florins - first_name: Kürt full_name: Demeulemeester, Kürt last_name: Demeulemeester citation: ama: 'Goffart JP, Haverkort A, Storey M, et al. Potato Production in Northwestern Europe (Germany, France, the Netherlands, United Kingdom, Belgium): Characteristics, Issues, Challenges and Opportunities.   Potato research : journal of the European Association for Potato Research. 2022;65(3):503-547. doi:10.1007/s11540-021-09535-8' apa: 'Goffart, J.-P., Haverkort, A., Storey, M., Haase, N., Martin, M., Lebrun, P., Ryckmans, D., Florins, D., & Demeulemeester, K. (2022). Potato Production in Northwestern Europe (Germany, France, the Netherlands, United Kingdom, Belgium): Characteristics, Issues, Challenges and Opportunities.   Potato Research : Journal of the European Association for Potato Research, 65(3), 503–547. https://doi.org/10.1007/s11540-021-09535-8' bjps: 'Goffart J-P et al. (2022) Potato Production in Northwestern Europe (Germany, France, the Netherlands, United Kingdom, Belgium): Characteristics, Issues, Challenges and Opportunities.   Potato research : journal of the European Association for Potato Research 65, 503–547.' chicago: 'Goffart, Jean-Pierre, Anton Haverkort, Michael Storey, Norbert Haase, Michel Martin, Pierre Lebrun, Daniel Ryckmans, Dominique Florins, and Kürt Demeulemeester. “Potato Production in Northwestern Europe (Germany, France, the Netherlands, United Kingdom, Belgium): Characteristics, Issues, Challenges and Opportunities.”   Potato Research : Journal of the European Association for Potato Research 65, no. 3 (2022): 503–47. https://doi.org/10.1007/s11540-021-09535-8.' chicago-de: 'Goffart, Jean-Pierre, Anton Haverkort, Michael Storey, Norbert Haase, Michel Martin, Pierre Lebrun, Daniel Ryckmans, Dominique Florins und Kürt Demeulemeester. 2022. Potato Production in Northwestern Europe (Germany, France, the Netherlands, United Kingdom, Belgium): Characteristics, Issues, Challenges and Opportunities.   Potato research : journal of the European Association for Potato Research 65, Nr. 3: 503–547. doi:10.1007/s11540-021-09535-8, .' din1505-2-1: 'Goffart, Jean-Pierre ; Haverkort, Anton ; Storey, Michael ; Haase, Norbert ; Martin, Michel ; Lebrun, Pierre ; Ryckmans, Daniel ; Florins, Dominique ; u. a.: Potato Production in Northwestern Europe (Germany, France, the Netherlands, United Kingdom, Belgium): Characteristics, Issues, Challenges and Opportunities. In:   Potato research : journal of the European Association for Potato Research Bd. 65. Dordrecht, Springer (2022), Nr. 3, S. 503–547' havard: 'J.-P. Goffart, A. Haverkort, M. Storey, N. Haase, M. Martin, P. Lebrun, D. Ryckmans, D. Florins, K. Demeulemeester, Potato Production in Northwestern Europe (Germany, France, the Netherlands, United Kingdom, Belgium): Characteristics, Issues, Challenges and Opportunities,   Potato Research : Journal of the European Association for Potato Research. 65 (2022) 503–547.' ieee: 'J.-P. Goffart et al., “Potato Production in Northwestern Europe (Germany, France, the Netherlands, United Kingdom, Belgium): Characteristics, Issues, Challenges and Opportunities,”   Potato research : journal of the European Association for Potato Research, vol. 65, no. 3, pp. 503–547, 2022, doi: 10.1007/s11540-021-09535-8.' mla: 'Goffart, Jean-Pierre, et al. “Potato Production in Northwestern Europe (Germany, France, the Netherlands, United Kingdom, Belgium): Characteristics, Issues, Challenges and Opportunities.”   Potato Research : Journal of the European Association for Potato Research, vol. 65, no. 3, 2022, pp. 503–47, https://doi.org/10.1007/s11540-021-09535-8.' short: 'J.-P. Goffart, A. Haverkort, M. Storey, N. Haase, M. Martin, P. Lebrun, D. Ryckmans, D. Florins, K. Demeulemeester,   Potato Research : Journal of the European Association for Potato Research 65 (2022) 503–547.' ufg: 'Goffart, Jean-Pierre u. a.: Potato Production in Northwestern Europe (Germany, France, the Netherlands, United Kingdom, Belgium): Characteristics, Issues, Challenges and Opportunities, in:   Potato research : journal of the European Association for Potato Research 65 (2022), H. 3,  S. 503–547.' van: 'Goffart JP, Haverkort A, Storey M, Haase N, Martin M, Lebrun P, et al. Potato Production in Northwestern Europe (Germany, France, the Netherlands, United Kingdom, Belgium): Characteristics, Issues, Challenges and Opportunities.   Potato research : journal of the European Association for Potato Research. 2022;65(3):503–47.' date_created: 2025-04-23T08:28:07Z date_updated: 2025-06-26T13:26:42Z department: - _id: DEP4000 - _id: DEP4028 doi: 10.1007/s11540-021-09535-8 external_id: isi: - '000749166300001' pmid: - '35106009' intvolume: ' 65' isi: '1' issue: '3' keyword: - Industrial agri-food production - Production practices - Sustainability - Value-chain language: - iso: eng page: 503-547 place: Dordrecht pmid: '1' publication: ' Potato research : journal of the European Association for Potato Research' publication_identifier: eissn: - 1871-4528 issn: - 0014-3065 publication_status: published publisher: 'Springer ' status: public title: 'Potato Production in Northwestern Europe (Germany, France, the Netherlands, United Kingdom, Belgium): Characteristics, Issues, Challenges and Opportunities' type: scientific_journal_article user_id: '83781' volume: 65 year: '2022' ... --- _id: '7033' abstract: - lang: eng text: Industry 4.0 technologies influence how production is planned, scheduled, and controlled. In literature, different classifications of the tasks and functions of production planning and control (PPC) exist, of which one is the German Aachen PPC model. This paper conducts an exploratory literature review by reviewing 48 publications on a full-text basis. Based on the review, a cyber-physical PPC architecture is proposed, which incorporates current Industry 4.0 technologies, current optimisation methods, optimisation objectives, and disturbances, relevant for the realisation of a PPC system in a smart factory. A classification scheme is developed as a basis for two cluster analyses that reveal researched and unexplored tasks and functions of the Aachen PPC model. Current approaches focus on the in-house PPC, particularly on the control using real-time information from the shop floor. Future research directions are proposed for the unexplored tasks and functions of the Aachen PPC model. author: - first_name: Jan-Phillip full_name: Herrmann, Jan-Phillip id: '75846' last_name: Herrmann - first_name: Sven full_name: Tackenberg, Sven id: '71470' last_name: Tackenberg - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Thilo full_name: Gamber, Thilo id: '71451' last_name: Gamber citation: ama: Herrmann JP, Tackenberg S, Padoano E, Gamber T. A literature review and cluster analysis of the Aachen production planning and control model under Industry 4.0. Procedia Computer Science. 2021;180:208-218. doi:10.1016/j.procs.2021.01.158 apa: Herrmann, J.-P., Tackenberg, S., Padoano, E., & Gamber, T. (2021). A literature review and cluster analysis of the Aachen production planning and control model under Industry 4.0. Procedia Computer Science, 180, 208–218. https://doi.org/10.1016/j.procs.2021.01.158 bjps: Herrmann J-P et al. (2021) A Literature Review and Cluster Analysis of the Aachen Production Planning and Control Model under Industry 4.0. Procedia Computer Science 180, 208–218. chicago: 'Herrmann, Jan-Phillip, Sven Tackenberg, Elio Padoano, and Thilo Gamber. “A Literature Review and Cluster Analysis of the Aachen Production Planning and Control Model under Industry 4.0.” Procedia Computer Science 180 (2021): 208–18. https://doi.org/10.1016/j.procs.2021.01.158.' chicago-de: 'Herrmann, Jan-Phillip, Sven Tackenberg, Elio Padoano und Thilo Gamber. 2021. A literature review and cluster analysis of the Aachen production planning and control model under Industry 4.0. Procedia Computer Science 180: 208–218. doi:10.1016/j.procs.2021.01.158, .' din1505-2-1: 'Herrmann, Jan-Phillip ; Tackenberg, Sven ; Padoano, Elio ; Gamber, Thilo: A literature review and cluster analysis of the Aachen production planning and control model under Industry 4.0. In: Procedia Computer Science Bd. 180, Elsevier (2021), S. 208–218' havard: J.-P. Herrmann, S. Tackenberg, E. Padoano, T. Gamber, A literature review and cluster analysis of the Aachen production planning and control model under Industry 4.0, Procedia Computer Science. 180 (2021) 208–218. ieee: 'J.-P. Herrmann, S. Tackenberg, E. Padoano, and T. Gamber, “A literature review and cluster analysis of the Aachen production planning and control model under Industry 4.0,” Procedia Computer Science, vol. 180, pp. 208–218, 2021, doi: 10.1016/j.procs.2021.01.158.' mla: Herrmann, Jan-Phillip, et al. “A Literature Review and Cluster Analysis of the Aachen Production Planning and Control Model under Industry 4.0.” Procedia Computer Science, vol. 180, 2021, pp. 208–18, https://doi.org/10.1016/j.procs.2021.01.158. short: J.-P. Herrmann, S. Tackenberg, E. Padoano, T. Gamber, Procedia Computer Science 180 (2021) 208–218. ufg: 'Herrmann, Jan-Phillip u. a.: A literature review and cluster analysis of the Aachen production planning and control model under Industry 4.0, in: Procedia Computer Science 180 (2021),  S. 208–218.' van: Herrmann JP, Tackenberg S, Padoano E, Gamber T. A literature review and cluster analysis of the Aachen production planning and control model under Industry 4.0. Procedia Computer Science. 2021;180:208–18. date_created: 2022-02-08T14:43:59Z date_updated: 2024-08-05T08:48:34Z department: - _id: DEP7020 - _id: DEP1305 doi: 10.1016/j.procs.2021.01.158 intvolume: ' 180' keyword: - Production planning - control - Industry 4.0 - Industrial Internet of Things - Exploratory literature review language: - iso: eng page: 208-218 publication: Procedia Computer Science publication_identifier: issn: - 1877-0509 publication_status: published publisher: Elsevier status: public title: A literature review and cluster analysis of the Aachen production planning and control model under Industry 4.0 type: journal_article user_id: '83781' volume: 180 year: '2021' ... --- _id: '12790' abstract: - lang: eng text: n the last years, Additive Manufacturing, thanks to its capability of continuous improvements in performance and cost-efficiency, was able to partly replace and redefine well-established manufacturing processes. This research is based on the idea to achieve great cost and operational benefits especially in the field of tool making for injection molding by combining traditional and additive manufacturing in one process chain. Special attention is given to the surface quality in terms of surface roughness and its optimization directly in the Selective Laser Melting process. This article presents the possibility for a remelting process of the SLM parts as a way to optimize the surfaces of the produced parts. The influence of laser remelting on the surface roughness of the parts is analyzed while varying machine parameters like laser power and scan settings. Laser remelting with optimized parameter settings considerably improves the surface quality of SLM parts and is a great starting point for further post-processing techniques, which require a low initial value of surface roughness. author: - first_name: Filippo full_name: Simoni, Filippo last_name: Simoni - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: Simoni F, Huxol A, Villmer FJ. Improving surface quality in selective laser melting based tool making. Journal of Intelligent Manufacturing. 2021;32(7):1927-1938. doi:10.1007/s10845-021-01744-9 apa: Simoni, F., Huxol, A., & Villmer, F.-J. (2021). Improving surface quality in selective laser melting based tool making. Journal of Intelligent Manufacturing, 32(7), 1927–1938. https://doi.org/10.1007/s10845-021-01744-9 bjps: Simoni F, Huxol A and Villmer F-J (2021) Improving Surface Quality in Selective Laser Melting Based Tool Making. Journal of Intelligent Manufacturing 32, 1927–1938. chicago: 'Simoni, Filippo, Andrea Huxol, and Franz-Josef Villmer. “Improving Surface Quality in Selective Laser Melting Based Tool Making.” Journal of Intelligent Manufacturing 32, no. 7 (2021): 1927–38. https://doi.org/10.1007/s10845-021-01744-9.' chicago-de: 'Simoni, Filippo, Andrea Huxol und Franz-Josef Villmer. 2021. Improving surface quality in selective laser melting based tool making. Journal of Intelligent Manufacturing 32, Nr. 7: 1927–1938. doi:10.1007/s10845-021-01744-9, .' din1505-2-1: 'Simoni, Filippo ; Huxol, Andrea ; Villmer, Franz-Josef: Improving surface quality in selective laser melting based tool making. In: Journal of Intelligent Manufacturing Bd. 32. Dordrecht [u.a.], Springer Science and Business Media (2021), Nr. 7, S. 1927–1938' havard: F. Simoni, A. Huxol, F.-J. Villmer, Improving surface quality in selective laser melting based tool making, Journal of Intelligent Manufacturing. 32 (2021) 1927–1938. ieee: 'F. Simoni, A. Huxol, and F.-J. Villmer, “Improving surface quality in selective laser melting based tool making,” Journal of Intelligent Manufacturing, vol. 32, no. 7, pp. 1927–1938, 2021, doi: 10.1007/s10845-021-01744-9.' mla: Simoni, Filippo, et al. “Improving Surface Quality in Selective Laser Melting Based Tool Making.” Journal of Intelligent Manufacturing, vol. 32, no. 7, 2021, pp. 1927–38, https://doi.org/10.1007/s10845-021-01744-9. short: F. Simoni, A. Huxol, F.-J. Villmer, Journal of Intelligent Manufacturing 32 (2021) 1927–1938. ufg: 'Simoni, Filippo/Huxol, Andrea/Villmer, Franz-Josef: Improving surface quality in selective laser melting based tool making, in: Journal of Intelligent Manufacturing 32 (2021), H. 7,  S. 1927–1938.' van: Simoni F, Huxol A, Villmer FJ. Improving surface quality in selective laser melting based tool making. Journal of Intelligent Manufacturing. 2021;32(7):1927–38. date_created: 2025-04-15T09:17:22Z date_updated: 2025-06-26T13:41:37Z department: - _id: DEP7000 doi: 10.1007/s10845-021-01744-9 external_id: isi: - '000636136100001' intvolume: ' 32' isi: '1' issue: '7' keyword: - Direct rapid tooling - Toolmaking - Additive manufacturing process chain - Process control - Production systems - Selective laser melting - Surface roughness - Laser surface remelting language: - iso: eng page: 1927-1938 place: Dordrecht [u.a.] publication: Journal of Intelligent Manufacturing publication_identifier: eissn: - 1572-8145 issn: - 0956-5515 publication_status: published publisher: Springer Science and Business Media status: public title: Improving surface quality in selective laser melting based tool making type: scientific_journal_article user_id: '83781' volume: 32 year: '2021' ... --- _id: '12792' abstract: - lang: eng text: Additive Manufacturing has arisen as a ground-breaking set of technologies that, thanks to their capability of continuous improvements in performance and cost-efficiency, was able in the last years to replace well-established manufacturing processes. Proficiency in the fabrication of highly complex parts forced this astonishing development. This research is based on the idea that through the integration of additive and conventional manufacturing technologies it is possible to achieve great cost and operational benefits especially in the field of tool making for injection molding. Such an integrated manufacturing solution could overcome the limitations of independent additive, subtractive, and post-processing procedures by strengthening their potentialities. The present study highlights the opportunities of a synergy between the above-mentioned manufacturing technologies for the optimized fabrication of injection molds. An additive manufacturing process chain is presented, and special attention is given to the surface quality and its optimization directly in the Selective Laser Melting process. The potentialities of the Laser Surface Re-melting technique are analyzed, and the process optimization leads to a reduction of 45% of the average roughness directly in the SLM process. (C) 2019, IFAC (International Federation of Automatic Control) Hosting by Elsevier Ltd. All rights reserved. author: - first_name: Filippo full_name: Simoni, Filippo last_name: Simoni - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: Simoni F, Huxol A, Villmer FJ. Approach Towards Surface Improvement in Additively Manufactured Tools. Vol 52. Elsevier BV; 2019:254-259. doi:10.1016/j.ifacol.2019.10.032 apa: Simoni, F., Huxol, A., & Villmer, F.-J. (2019). Approach Towards Surface Improvement in Additively Manufactured Tools. In 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS) (Vol. 52, pp. 254–259). Elsevier BV. https://doi.org/10.1016/j.ifacol.2019.10.032 bjps: 'Simoni F, Huxol A and Villmer F-J (2019) Approach Towards Surface Improvement in Additively Manufactured Tools. Amsterdam [u.a.]: Elsevier BV.' chicago: 'Simoni, Filippo, Andrea Huxol, and Franz-Josef Villmer. Approach Towards Surface Improvement in Additively Manufactured Tools. 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS). Vol. 52. IFAC-PapersOnLine. Amsterdam [u.a.]: Elsevier BV, 2019. https://doi.org/10.1016/j.ifacol.2019.10.032.' chicago-de: 'Simoni, Filippo, Andrea Huxol und Franz-Josef Villmer. 2019. Approach Towards Surface Improvement in Additively Manufactured Tools. 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS). Bd. 52. IFAC-PapersOnLine. Amsterdam [u.a.]: Elsevier BV. doi:10.1016/j.ifacol.2019.10.032, .' din1505-2-1: 'Simoni, Filippo ; Huxol, Andrea ; Villmer, Franz-Josef: Approach Towards Surface Improvement in Additively Manufactured Tools, IFAC-PapersOnLine. Bd. 52. Amsterdam [u.a.] : Elsevier BV, 2019' havard: F. Simoni, A. Huxol, F.-J. Villmer, Approach Towards Surface Improvement in Additively Manufactured Tools, Elsevier BV, Amsterdam [u.a.], 2019. ieee: 'F. Simoni, A. Huxol, and F.-J. Villmer, Approach Towards Surface Improvement in Additively Manufactured Tools, vol. 52. Amsterdam [u.a.]: Elsevier BV, 2019, pp. 254–259. doi: 10.1016/j.ifacol.2019.10.032.' mla: Simoni, Filippo, et al. “Approach Towards Surface Improvement in Additively Manufactured Tools.” 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS), vol. 52, Elsevier BV, 2019, pp. 254–59, https://doi.org/10.1016/j.ifacol.2019.10.032. short: F. Simoni, A. Huxol, F.-J. Villmer, Approach Towards Surface Improvement in Additively Manufactured Tools, Elsevier BV, Amsterdam [u.a.], 2019. ufg: 'Simoni, Filippo/Huxol, Andrea/Villmer, Franz-Josef: Approach Towards Surface Improvement in Additively Manufactured Tools, Bd. 52, Amsterdam [u.a.] 2019 (IFAC-PapersOnLine).' van: 'Simoni F, Huxol A, Villmer FJ. Approach Towards Surface Improvement in Additively Manufactured Tools. 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS). Amsterdam [u.a.]: Elsevier BV; 2019. (IFAC-PapersOnLine; vol. 52).' conference: end_date: 2019-08-14 location: Oshawa, CANADA name: 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS) start_date: 2019-08-12 date_created: 2025-04-15T09:32:02Z date_updated: 2025-06-26T13:40:36Z department: - _id: DEP7000 doi: 10.1016/j.ifacol.2019.10.032 intvolume: ' 52' keyword: - Direct rapid tooling - toolmaking - additive manufacturing process chain - process control - production systems - selective laser melting - surface roughness - laser surface re-melting language: - iso: eng page: 254-259 place: Amsterdam [u.a.] publication: 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS) publication_identifier: issn: - 2405-8963 publication_status: published publisher: Elsevier BV series_title: IFAC-PapersOnLine status: public title: Approach Towards Surface Improvement in Additively Manufactured Tools type: conference_editor_article user_id: '83781' volume: 52 year: '2019' ... --- _id: '12971' abstract: - lang: eng text: The genus Stachybotrys produces a broad diversity of secondary metabolites, including macrocyclic trichothecenes, atranones, and phenylspirodrimanes. Although the class of the phenylspirodrimanes is the major one and consists of a multitude of metabolites bearing various structural modifications, few investigations have been carried out. Thus, the presented study deals with the quantitative determination of several secondary metabolites produced by distinct Stachybotrys species for comparison of their metabolite profiles. For that purpose, 15 of the primarily produced secondary metabolites were isolated from fungal cultures and structurally characterized in order to be used as analytical standards for the development of an LC-MS/MS multimethod. The developed method was applied to the analysis of micro-scale extracts from 5 different Stachybotrys strains, which were cultured on different media. In that process, spontaneous dialdehyde/lactone isomerization was observed for some of the isolated secondary metabolites, and novel stachybotrychromenes were quantitatively investigated for the first time. The metabolite profiles of Stachybotrys species are considerably influenced by time of growth and substrate availability, as well as the individual biosynthetic potential of the respective species. Regarding the reported adverse effects associated with Stachybotrys growth in building environments, combinatory effects of the investigated secondary metabolites should be addressed and the role of the phenylspirodrimanes re-evaluated in future research. article_number: '133' author: - first_name: Annika full_name: Jagels, Annika last_name: Jagels - first_name: Viktoria full_name: Lindemann, Viktoria last_name: Lindemann - first_name: Sebastian full_name: Ulrich, Sebastian id: '85847' last_name: Ulrich orcid: 0000-0002-4511-9537 - first_name: Christoph full_name: Gottschalk, Christoph last_name: Gottschalk - first_name: Benedikt full_name: Cramer, Benedikt last_name: Cramer - first_name: Florian full_name: Hübner, Florian last_name: Hübner - first_name: Manfred full_name: Gareis, Manfred last_name: Gareis - first_name: Hans-Ulrich full_name: Humpf, Hans-Ulrich last_name: Humpf citation: ama: Jagels A, Lindemann V, Ulrich S, et al. Exploring Secondary Metabolite Profiles of Stachybotrys spp. by LC-MS/MS. Toxins. 2019;11(3). doi:10.3390/toxins11030133 apa: Jagels, A., Lindemann, V., Ulrich, S., Gottschalk, C., Cramer, B., Hübner, F., Gareis, M., & Humpf, H.-U. (2019). Exploring Secondary Metabolite Profiles of Stachybotrys spp. by LC-MS/MS. Toxins, 11(3), Article 133. https://doi.org/10.3390/toxins11030133 bjps: Jagels A et al. (2019) Exploring Secondary Metabolite Profiles of Stachybotrys Spp. by LC-MS/MS. Toxins 11. chicago: Jagels, Annika, Viktoria Lindemann, Sebastian Ulrich, Christoph Gottschalk, Benedikt Cramer, Florian Hübner, Manfred Gareis, and Hans-Ulrich Humpf. “Exploring Secondary Metabolite Profiles of Stachybotrys Spp. by LC-MS/MS.” Toxins 11, no. 3 (2019). https://doi.org/10.3390/toxins11030133. chicago-de: Jagels, Annika, Viktoria Lindemann, Sebastian Ulrich, Christoph Gottschalk, Benedikt Cramer, Florian Hübner, Manfred Gareis und Hans-Ulrich Humpf. 2019. Exploring Secondary Metabolite Profiles of Stachybotrys spp. by LC-MS/MS. Toxins 11, Nr. 3. doi:10.3390/toxins11030133, . din1505-2-1: 'Jagels, Annika ; Lindemann, Viktoria ; Ulrich, Sebastian ; Gottschalk, Christoph ; Cramer, Benedikt ; Hübner, Florian ; Gareis, Manfred ; Humpf, Hans-Ulrich: Exploring Secondary Metabolite Profiles of Stachybotrys spp. by LC-MS/MS. In: Toxins Bd. 11. Basel, MDPI (2019), Nr. 3' havard: A. Jagels, V. Lindemann, S. Ulrich, C. Gottschalk, B. Cramer, F. Hübner, M. Gareis, H.-U. Humpf, Exploring Secondary Metabolite Profiles of Stachybotrys spp. by LC-MS/MS, Toxins. 11 (2019). ieee: 'A. Jagels et al., “Exploring Secondary Metabolite Profiles of Stachybotrys spp. by LC-MS/MS,” Toxins, vol. 11, no. 3, Art. no. 133, 2019, doi: 10.3390/toxins11030133.' mla: Jagels, Annika, et al. “Exploring Secondary Metabolite Profiles of Stachybotrys Spp. by LC-MS/MS.” Toxins, vol. 11, no. 3, 133, 2019, https://doi.org/10.3390/toxins11030133. short: A. Jagels, V. Lindemann, S. Ulrich, C. Gottschalk, B. Cramer, F. Hübner, M. Gareis, H.-U. Humpf, Toxins 11 (2019). ufg: 'Jagels, Annika u. a.: Exploring Secondary Metabolite Profiles of Stachybotrys spp. by LC-MS/MS, in: Toxins 11 (2019), H. 3.' van: Jagels A, Lindemann V, Ulrich S, Gottschalk C, Cramer B, Hübner F, et al. Exploring Secondary Metabolite Profiles of Stachybotrys spp. by LC-MS/MS. Toxins. 2019;11(3). date_created: 2025-06-15T10:23:36Z date_updated: 2025-06-17T14:12:55Z department: - _id: DEP4010 doi: 10.3390/toxins11030133 extern: '1' intvolume: ' 11' issue: '3' keyword: - Stachybotrys spp. - metabolite profiles - LC-MS/MS - satratoxins - phenylspirodrimanes - stachybotrychromenes - biosynthetic production language: - iso: eng place: Basel publication: Toxins publication_identifier: eissn: - 2072-6651 publication_status: published publisher: MDPI quality_controlled: '1' status: public title: Exploring Secondary Metabolite Profiles of Stachybotrys spp. by LC-MS/MS type: scientific_journal_article user_id: '83781' volume: 11 year: '2019' ... --- _id: '4320' abstract: - lang: eng text: The use of Assistive Technology (AT) plays a significant role in the advancement of greater independence for individuals with disabilities in their work life. In particular, digital step-by-step support can enable people to perform production tasks that were formerly difficult to accomplish. In this paper, we focused on finding a solution for a specific production process. To this end, we set up a prototype assistive system for performing a cutting task which provides step-by-step support for people with disabilities. In an evaluation study with impaired people, we investigated how our assistive system affects the task efficiency as well as participants’ subjective evaluation of perceived mental effort and system usability. Results show advantages for step-by-step support with regard to users’ task efficiency and subjective evaluation. author: - first_name: Volkan full_name: Aksu, Volkan last_name: Aksu - first_name: Sascha full_name: Jenderny, Sascha last_name: Jenderny - first_name: Sascha full_name: Martinez, Sascha last_name: Martinez - first_name: Carsten full_name: Röcker, Carsten id: '61525' last_name: Röcker citation: ama: 'Aksu V, Jenderny S, Martinez S, Röcker C. A Digital Assistance System Providing Step-by-Step Support for People with Disabilities in Production Tasks. In: Ahram TZ, Falcão C, eds. Advances in Usability, User Experience and Assistive Technology. Vol 794. Advances in Intelligent Systems and Computing. Cham: Springer; 2018:775-785. doi:10.1007/978-3-319-94947-5_76' apa: 'Aksu, V., Jenderny, S., Martinez, S., & Röcker, C. (2018). A Digital Assistance System Providing Step-by-Step Support for People with Disabilities in Production Tasks. In T. Z. Ahram & C. Falcão (Eds.), Advances in Usability, User Experience and Assistive Technology (Vol. 794, pp. 775–785). Cham: Springer. https://doi.org/10.1007/978-3-319-94947-5_76' bjps: 'Aksu V et al. (2018) A Digital Assistance System Providing Step-by-Step Support for People with Disabilities in Production Tasks. In Ahram TZ and Falcão C (eds), Advances in Usability, User Experience and Assistive Technology, vol. 794. Cham: Springer, pp. 775–785.' chicago: 'Aksu, Volkan, Sascha Jenderny, Sascha Martinez, and Carsten Röcker. “A Digital Assistance System Providing Step-by-Step Support for People with Disabilities in Production Tasks.” In Advances in Usability, User Experience and Assistive Technology, edited by Tareq Z. Ahram and Christianne Falcão, 794:775–85. Advances in Intelligent Systems and Computing. Cham: Springer, 2018. https://doi.org/10.1007/978-3-319-94947-5_76.' chicago-de: 'Aksu, Volkan, Sascha Jenderny, Sascha Martinez und Carsten Röcker. 2018. A Digital Assistance System Providing Step-by-Step Support for People with Disabilities in Production Tasks. In: Advances in Usability, User Experience and Assistive Technology, hg. von Tareq Z. Ahram und Christianne Falcão, 794:775–785. Advances in Intelligent Systems and Computing. Cham: Springer. doi:10.1007/978-3-319-94947-5_76, .' din1505-2-1: 'Aksu, Volkan ; Jenderny, Sascha ; Martinez, Sascha ; Röcker, Carsten: A Digital Assistance System Providing Step-by-Step Support for People with Disabilities in Production Tasks. In: Ahram, T. Z. ; Falcão, C. (Hrsg.): Advances in Usability, User Experience and Assistive Technology, Advances in Intelligent Systems and Computing. Bd. 794. Cham : Springer, 2018, S. 775–785' havard: 'V. Aksu, S. Jenderny, S. Martinez, C. Röcker, A Digital Assistance System Providing Step-by-Step Support for People with Disabilities in Production Tasks, in: T.Z. Ahram, C. Falcão (Eds.), Advances in Usability, User Experience and Assistive Technology, Springer, Cham, 2018: pp. 775–785.' ieee: V. Aksu, S. Jenderny, S. Martinez, and C. Röcker, “A Digital Assistance System Providing Step-by-Step Support for People with Disabilities in Production Tasks,” in Advances in Usability, User Experience and Assistive Technology, Orlando, Florida, USA, 2018, vol. 794, pp. 775–785. mla: Aksu, Volkan, et al. “A Digital Assistance System Providing Step-by-Step Support for People with Disabilities in Production Tasks.” Advances in Usability, User Experience and Assistive Technology, edited by Tareq Z. Ahram and Christianne Falcão, vol. 794, Springer, 2018, pp. 775–85, doi:10.1007/978-3-319-94947-5_76. short: 'V. Aksu, S. Jenderny, S. Martinez, C. Röcker, in: T.Z. Ahram, C. Falcão (Eds.), Advances in Usability, User Experience and Assistive Technology, Springer, Cham, 2018, pp. 775–785.' ufg: 'Aksu, Volkan et. al. (2018): A Digital Assistance System Providing Step-by-Step Support for People with Disabilities in Production Tasks, in: Tareq Z. Ahram/Christianne Falcão (Hgg.): Advances in Usability, User Experience and Assistive Technology (=Advances in Intelligent Systems and Computing 794), Cham, S. 775–785.' van: 'Aksu V, Jenderny S, Martinez S, Röcker C. A Digital Assistance System Providing Step-by-Step Support for People with Disabilities in Production Tasks. In: Ahram TZ, Falcão C, editors. Advances in Usability, User Experience and Assistive Technology. Cham: Springer; 2018. p. 775–85. (Advances in Intelligent Systems and Computing; vol. 794).' conference: end_date: 2018-07-25 location: Orlando, Florida, USA name: 2018 International Conferences on Usability & User Experience and Human Factors and Assistive Technology ; AHFE 2018 start_date: 2018-07-21 date_created: 2021-01-08T08:26:20Z date_updated: 2023-03-15T13:49:52Z department: - _id: DEP5023 doi: 10.1007/978-3-319-94947-5_76 editor: - first_name: Tareq Z. full_name: Ahram, Tareq Z. last_name: Ahram - first_name: Christianne full_name: Falcão, Christianne last_name: Falcão intvolume: ' 794' keyword: - Assistive Technology - People with disabilities - User-centered - Design - Human-computer-interaction - Production Step-by-step instructions language: - iso: eng main_file_link: - open_access: '1' oa: '1' page: 775-785 place: Cham publication: Advances in Usability, User Experience and Assistive Technology publication_identifier: eisbn: - 978-3-319-94947-5 isbn: - 978-3-319-94946-8 publication_status: published publisher: Springer series_title: Advances in Intelligent Systems and Computing status: public title: A Digital Assistance System Providing Step-by-Step Support for People with Disabilities in Production Tasks type: conference user_id: '15514' volume: 794 year: 2018 ... --- _id: '4321' abstract: - lang: eng text: Recent research has shown that computer-based Assistive Technology (AT) has the potential to support individuals with disabilities in production environments. At the same time, step-by-step instructions enable workers to be successful in their performance of industrial tasks that were formerly difficult to accomplish. We merged these two types of intervention and developed an application running on a mobile device that can assist disabled workers working more independently. In an evaluation study, we investigated how our assistive system affects the task efficiency as well as participants’ subjective evaluation. Results show advantages when using the assistive prototype with regard to users’ task efficiency and subjective evaluations. author: - first_name: Volkan full_name: Aksu, Volkan last_name: Aksu - first_name: Sascha full_name: Jenderny, Sascha last_name: Jenderny - first_name: Sascha full_name: Martinez, Sascha last_name: Martinez - first_name: Carsten full_name: Röcker, Carsten id: '61525' last_name: Röcker citation: ama: 'Aksu V, Jenderny S, Martinez S, Röcker C. Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace. In: Di Bucchianico G, ed. Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace. Vol 776. Advances in Intelligent Systems and Computing. Cham: Springer; 2018:3-14. doi:10.1007/978-3-319-94622-1_1' apa: 'Aksu, V., Jenderny, S., Martinez, S., & Röcker, C. (2018). Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace. In G. Di Bucchianico (Ed.), Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace (Vol. 776, pp. 3–14). Cham: Springer. https://doi.org/10.1007/978-3-319-94622-1_1' bjps: 'Aksu V et al. (2018) Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace. In Di Bucchianico G (ed.), Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace, vol. 776. Cham: Springer, pp. 3–14.' chicago: 'Aksu, Volkan, Sascha Jenderny, Sascha Martinez, and Carsten Röcker. “Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace.” In Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace, edited by Giuseppe Di Bucchianico, 776:3–14. Advances in Intelligent Systems and Computing. Cham: Springer, 2018. https://doi.org/10.1007/978-3-319-94622-1_1.' chicago-de: 'Aksu, Volkan, Sascha Jenderny, Sascha Martinez und Carsten Röcker. 2018. Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace. In: Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace, hg. von Giuseppe Di Bucchianico, 776:3–14. Advances in Intelligent Systems and Computing. Cham: Springer. doi:10.1007/978-3-319-94622-1_1, .' din1505-2-1: 'Aksu, Volkan ; Jenderny, Sascha ; Martinez, Sascha ; Röcker, Carsten: Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace. In: Di Bucchianico, G. (Hrsg.): Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace, Advances in Intelligent Systems and Computing. Bd. 776. Cham : Springer, 2018, S. 3–14' havard: 'V. Aksu, S. Jenderny, S. Martinez, C. Röcker, Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace, in: G. Di Bucchianico (Ed.), Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace, Springer, Cham, 2018: pp. 3–14.' ieee: V. Aksu, S. Jenderny, S. Martinez, and C. Röcker, “Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace,” in Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace, Orlando, Florida, USA, 2018, vol. 776, pp. 3–14. mla: Aksu, Volkan, et al. “Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace.” Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace, edited by Giuseppe Di Bucchianico, vol. 776, Springer, 2018, pp. 3–14, doi:10.1007/978-3-319-94622-1_1. short: 'V. Aksu, S. Jenderny, S. Martinez, C. Röcker, in: G. Di Bucchianico (Ed.), Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace, Springer, Cham, 2018, pp. 3–14.' ufg: 'Aksu, Volkan et. al. (2018): Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace, in: Giuseppe Di Bucchianico (Hg.): Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace (=Advances in Intelligent Systems and Computing 776), Cham, S. 3–14.' van: 'Aksu V, Jenderny S, Martinez S, Röcker C. Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace. In: Di Bucchianico G, editor. Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace. Cham: Springer; 2018. p. 3–14. (Advances in Intelligent Systems and Computing; vol. 776).' conference: end_date: 2018-07-25 location: Orlando, Florida, USA name: 2018 International Conference on Advanced Production Management and Process Control ; AHFE 2018 start_date: 201-07-21 date_created: 2021-01-08T08:26:22Z date_updated: 2023-03-15T13:49:52Z department: - _id: DEP5023 doi: 10.1007/978-3-319-94622-1_1 editor: - first_name: 'Giuseppe ' full_name: 'Di Bucchianico, Giuseppe ' last_name: Di Bucchianico intvolume: ' 776' keyword: - Assistive technology - 'People with disabilities : Human computer interaction : Industry 4.0' - Inclusion - Context-sensitive assistance - Step-by-step instructions - Production - Mobile assistance language: - iso: eng main_file_link: - open_access: '1' oa: '1' page: 3-14 place: Cham publication: Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace publication_identifier: eisbn: - 978-3-319-94622-1 isbn: - 978-3-319-94621-4 publication_status: published publisher: Springer series_title: Advances in Intelligent Systems and Computing status: public title: Providing Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace type: conference user_id: '15514' volume: 776 year: 2018 ... --- _id: '550' abstract: - lang: eng text: Additive Manufacturing (AM) technologies are increasingly used for final part production. Especially technologies for processing of metal, like Selective LaserMelting (SLM), arefocusedin this area. The shift from prototyping towards final part production results in enhanced requirements for repeatability and predictability of the part quality. Machine manufacturers offer process monitoring solutions for different aspects of the production process, like the powder bed surface, the melt pool, and the laser energy. Nevertheless, the significance of these systems is not fully proven and threshold values for the monitored process parameters have to be determined for each product individually. This impedes the development of suitable process control systems. The paper gives an overview ofexistingresearch approaches and available process monitoring systems for SLM and their applicability for predicting certain part characteristics. The existing solutions are evaluated based on own research results. Next, AM specific difficulties for the development of process control tools and possible solutions are discussed. author: - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: 'Huxol A, Villmer F-J. Process Control for Selective Laser Melting - Opprtunities and Limitations. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2018:17-28.' apa: Huxol, A., & Villmer, F.-J. (2018). Process Control for Selective Laser Melting - Opprtunities and Limitations. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 17–28). Lemgo. bjps: Huxol A and Villmer F-J (2018) Process Control for Selective Laser Melting - Opprtunities and Limitations. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 17–28. chicago: Huxol, Andrea, and Franz-Josef Villmer. “Process Control for Selective Laser Melting - Opprtunities and Limitations.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 17–28. Lemgo, 2018. chicago-de: 'Huxol, Andrea und Franz-Josef Villmer. 2018. Process Control for Selective Laser Melting - Opprtunities and Limitations. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 17–28. Lemgo.' din1505-2-1: 'Huxol, Andrea ; Villmer, Franz-Josef: Process Control for Selective Laser Melting - Opprtunities and Limitations. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2018, S. 17–28' havard: 'A. Huxol, F.-J. Villmer, Process Control for Selective Laser Melting - Opprtunities and Limitations, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp. 17–28.' ieee: A. Huxol and F.-J. Villmer, “Process Control for Selective Laser Melting - Opprtunities and Limitations,” in Production Engineering and Management, Lemgo, 2018, no. 1, pp. 17–28. mla: Huxol, Andrea, and Franz-Josef Villmer. “Process Control for Selective Laser Melting - Opprtunities and Limitations.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 17–28. short: 'A. Huxol, F.-J. Villmer, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018, pp. 17–28.' ufg: 'Huxol, Andrea/Villmer, Franz-Josef (2018): Process Control for Selective Laser Melting - Opprtunities and Limitations, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 17–28.' van: 'Huxol A, Villmer F-J. Process Control for Selective Laser Melting - Opprtunities and Limitations. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2018. p. 17–28.' conference: end_date: 2018-10-05 location: Lemgo name: Proceedings 8th International Conference start_date: 2018-10-04 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-13T13:55:29Z date_updated: 2023-03-15T13:50:00Z department: - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Additive manufacturing - Process capability - Process monitoring - Quality assurance - Final part production language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf oa: '1' page: 17-28 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-946856-03-0 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf status: public title: Process Control for Selective Laser Melting - Opprtunities and Limitations type: conference user_id: '45673' year: 2018 ... --- _id: '561' abstract: - lang: eng text: A paradigm shift in the field of maintenance is essential for companies due to a progressive digitalization of production processes. Therefore, the new paradigm considersall phases of a system, from procurement, operation through to the recycling of the machine. Initially, at the start of the cycle manufacturers of machines and equipment have to focus on design, implementation and quality assurance in compliance with the requirements for operation and maintenance to minimize lifecycle cost. During operation,an efficient strategy for maintaining must be defined. Based on the introduced paradigm a maintenance check is presented, able to provide orientation to small and middle-sizedenterprises regarding their maintenance situation and level. The respective level is described on basis of the degree of maturity. Regarding further steps, it is the fundament for strategic decisions and activities. author: - first_name: Thomas full_name: Glatzel, Thomas id: '64888' last_name: Glatzel - first_name: Sven full_name: Tackenberg, Sven id: '71470' last_name: Tackenberg citation: ama: 'Glatzel T, Tackenberg S. Smart Production - A Paradigm-Shift in the Field of Maintenance. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2018:245-255.' apa: Glatzel, T., & Tackenberg, S. (2018). Smart Production - A Paradigm-Shift in the Field of Maintenance. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 245–255). Lemgo. bjps: Glatzel T and Tackenberg S (2018) Smart Production - A Paradigm-Shift in the Field of Maintenance. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 245–255. chicago: Glatzel, Thomas, and Sven Tackenberg. “Smart Production - A Paradigm-Shift in the Field of Maintenance.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 245–55. Lemgo, 2018. chicago-de: 'Glatzel, Thomas und Sven Tackenberg. 2018. Smart Production - A Paradigm-Shift in the Field of Maintenance. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 245–255. Lemgo.' din1505-2-1: 'Glatzel, Thomas ; Tackenberg, Sven: Smart Production - A Paradigm-Shift in the Field of Maintenance. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2018, S. 245–255' havard: 'T. Glatzel, S. Tackenberg, Smart Production - A Paradigm-Shift in the Field of Maintenance, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp. 245–255.' ieee: T. Glatzel and S. Tackenberg, “Smart Production - A Paradigm-Shift in the Field of Maintenance,” in Production Engineering and Management, Lemgo, 2018, no. 1, pp. 245–255. mla: Glatzel, Thomas, and Sven Tackenberg. “Smart Production - A Paradigm-Shift in the Field of Maintenance.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 245–55. short: 'T. Glatzel, S. Tackenberg, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018, pp. 245–255.' ufg: 'Glatzel, Thomas/Tackenberg, Sven (2018): Smart Production - A Paradigm-Shift in the Field of Maintenance, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 245–255.' van: 'Glatzel T, Tackenberg S. Smart Production - A Paradigm-Shift in the Field of Maintenance. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2018. p. 245–55.' conference: end_date: 2018-10-05 location: Lemgo name: Proceedings 8th International Conference start_date: 2018-10-04 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-13T16:11:29Z date_updated: 2023-03-15T13:50:00Z department: - _id: DEP7020 - _id: DEP1305 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Maintenance 4.0 - Smart production - Maintenance check - Maintenance maturity language: - iso: eng page: 245-255 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-946856-03-0 publication_status: published status: public title: Smart Production - A Paradigm-Shift in the Field of Maintenance type: conference user_id: '74004' year: 2018 ... --- _id: '1000' author: - first_name: Lina full_name: Pris, Lina id: '56837' last_name: Pris citation: ama: 'Pris L. Charakterdarstellung durch Production Design. Lemgo: Hochschule Ostwestfalen-Lippe; 2018.' apa: 'Pris, L. (2018). Charakterdarstellung durch Production Design. Lemgo: Hochschule Ostwestfalen-Lippe.' bjps: 'Pris L (2018) Charakterdarstellung durch Production Design. Lemgo: Hochschule Ostwestfalen-Lippe.' chicago: 'Pris, Lina. Charakterdarstellung durch Production Design. Lemgo: Hochschule Ostwestfalen-Lippe, 2018.' chicago-de: 'Pris, Lina. 2018. Charakterdarstellung durch Production Design. Lemgo: Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Pris, Lina: Charakterdarstellung durch Production Design. Lemgo : Hochschule Ostwestfalen-Lippe, 2018' havard: L. Pris, Charakterdarstellung durch Production Design, Hochschule Ostwestfalen-Lippe, Lemgo, 2018. ieee: 'L. Pris, Charakterdarstellung durch Production Design. Lemgo: Hochschule Ostwestfalen-Lippe, 2018.' mla: Pris, Lina. Charakterdarstellung durch Production Design. Hochschule Ostwestfalen-Lippe, 2018. short: L. Pris, Charakterdarstellung durch Production Design, Hochschule Ostwestfalen-Lippe, Lemgo, 2018. ufg: 'Pris, Lina (2018): Charakterdarstellung durch Production Design, Lemgo.' van: 'Pris L. Charakterdarstellung durch Production Design. Lemgo: Hochschule Ostwestfalen-Lippe; 2018. 67 p.' date_created: 2019-04-15T06:55:49Z date_updated: 2023-03-15T13:49:34Z ddc: - '770' department: - _id: DEP2001 file: - access_level: closed content_type: application/pdf creator: czr-e2t date_created: 2019-04-15T06:58:42Z date_updated: 2019-04-15T06:58:42Z file_id: '1001' file_name: Bachelorarbeit-Lina-Pris-15314001-Charakterdarstellung-durch-Production-Design.pdf file_size: 13803180 relation: main_file file_date_updated: 2019-04-15T06:58:42Z has_accepted_license: '1' keyword: - Charakterdarstellung - Film - Szenenbild - Production Design language: - iso: ger page: '67' place: Lemgo publication_status: published publisher: Hochschule Ostwestfalen-Lippe status: public supervisor: - first_name: Heizo full_name: Schulze, Heizo id: '29126' last_name: Schulze - first_name: Guido full_name: Falkemeier, Guido id: '29084' last_name: Falkemeier title: Charakterdarstellung durch Production Design type: bachelor_thesis user_id: '74004' year: 2018 ... --- _id: '4255' abstract: - lang: eng text: Increasingly, production processes are enabled and controlled by Information Technology (IT), a development being also referred to as “Industry 4.0”. IT thereby contributes to flexible and adaptive production processes, and in this sense factories become “smart factories”. In line with this, IT also more and more supports human workers via various assistance systems. This support aims to both support workers to better execute their tasks and to reduce the effort and time required when working. However, due to the large spectrum of assistance systems, it is hard to acquire an overview and to select an adequate system for a smart factory based on meaningful criteria. We therefore synthesize a set of comparison criteria into a consistent framework and demonstrate the application of our framework by classifying three examples. author: - first_name: Michael full_name: Fellmann, Michael last_name: Fellmann - first_name: Sebastian full_name: Robert, Sebastian last_name: Robert - first_name: Sebastian full_name: Büttner, Sebastian id: '61868' last_name: Büttner - first_name: Henrik full_name: Mucha, Henrik id: '64896' last_name: Mucha - first_name: Carsten full_name: Röcker, Carsten id: '61525' last_name: Röcker citation: ama: 'Fellmann M, Robert S, Büttner S, Mucha H, Röcker C. Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories. In: Holzinger A, ed. Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings. Vol 10410. Lecture Notes in Computer Science . Cham: Springer; 2017:59-68. doi:10.1007/978-3-319-66808-6_5' apa: 'Fellmann, M., Robert, S., Büttner, S., Mucha, H., & Röcker, C. (2017). Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories. In A. Holzinger (Ed.), Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings (Vol. 10410, pp. 59–68). Cham: Springer. https://doi.org/10.1007/978-3-319-66808-6_5' bjps: 'Fellmann M et al. (2017) Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories. In Holzinger A (ed.), Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, vol. 10410. Cham: Springer, pp. 59–68.' chicago: 'Fellmann, Michael, Sebastian Robert, Sebastian Büttner, Henrik Mucha, and Carsten Röcker. “Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories.” In Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, edited by Andreas Holzinger, 10410:59–68. Lecture Notes in Computer Science . Cham: Springer, 2017. https://doi.org/10.1007/978-3-319-66808-6_5.' chicago-de: 'Fellmann, Michael, Sebastian Robert, Sebastian Büttner, Henrik Mucha und Carsten Röcker. 2017. Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories. In: Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, hg. von Andreas Holzinger, 10410:59–68. Lecture Notes in Computer Science . Cham: Springer. doi:10.1007/978-3-319-66808-6_5, .' din1505-2-1: 'Fellmann, Michael ; Robert, Sebastian ; Büttner, Sebastian ; Mucha, Henrik ; Röcker, Carsten: Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories. In: Holzinger, A. (Hrsg.): Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, Lecture Notes in Computer Science . Bd. 10410. Cham : Springer, 2017, S. 59–68' havard: 'M. Fellmann, S. Robert, S. Büttner, H. Mucha, C. Röcker, Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories, in: A. Holzinger (Ed.), Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, Springer, Cham, 2017: pp. 59–68.' ieee: 'M. Fellmann, S. Robert, S. Büttner, H. Mucha, and C. Röcker, “Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories,” in Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, Reggio, Italy, 2017, vol. 10410, pp. 59–68.' mla: 'Fellmann, Michael, et al. “Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories.” Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, edited by Andreas Holzinger, vol. 10410, Springer, 2017, pp. 59–68, doi:10.1007/978-3-319-66808-6_5.' short: 'M. Fellmann, S. Robert, S. Büttner, H. Mucha, C. Röcker, in: A. Holzinger (Ed.), Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, Springer, Cham, 2017, pp. 59–68.' ufg: 'Fellmann, Michael et. al. (2017): Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories, in: Andreas Holzinger (Hg.): Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings (=Lecture Notes in Computer Science 10410), Cham, S. 59–68.' van: 'Fellmann M, Robert S, Büttner S, Mucha H, Röcker C. Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories. In: Holzinger A, editor. Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 84, 89, 129 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings. Cham: Springer; 2017. p. 59–68. (Lecture Notes in Computer Science ; vol. 10410).' conference: end_date: 2017-09-01 location: Reggio, Italy name: International Cross-Domain Conference, CD-MAKE 2017 start_date: 2017-08-29 date_created: 2020-12-10T13:40:05Z date_updated: 2023-03-15T13:49:51Z department: - _id: DEP5023 doi: 10.1007/978-3-319-66808-6_5 editor: - first_name: Andreas full_name: Holzinger, Andreas last_name: Holzinger intvolume: ' 10410' keyword: - Assistance systems - Smart factory - Production processes language: - iso: eng main_file_link: - open_access: '1' oa: '1' page: 59-68 place: Cham publication: ' Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings' publication_identifier: eisbn: - '9783319668086 ' isbn: - 978-3-319-66807-9 publication_status: published publisher: Springer series_title: 'Lecture Notes in Computer Science ' status: public title: Towards a Framework for Assistance Systems to Support Work Processes in Smart Factories type: conference user_id: '15514' volume: 10410 year: 2017 ... --- _id: '577' abstract: - lang: eng text: A rising number of product variants together with decreasing lot sizes are a result of the trend of individualization. Besides the upcoming organizational issues, changes in the production technologies are required. Direct digital manufacturing contributes to solve this problem by enabling the production of parts right from the CAD data.Process capability analysis is applied in several industries to prove the reliable compliance of products with quality requirements. As it is based on statistical methods, new challenges arise in the context of single-part production.The paper describes and compares different approaches for the adoption of process capability analysis for single-part production with special focus on additive manufacturing technologies. The statistical background and the applicability of different capability parameters are discussed. An overview of existing research work is given and supplemented by own approaches for the adoption of statistical methods for single-part production. The aim of the research work is to establish a first approach for the qualification of new technologies in single-part production. author: - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Andrea full_name: Davis, Andrea id: '68611' last_name: Davis - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer - first_name: Eva full_name: Scheideler, Eva id: '61522' last_name: Scheideler citation: ama: 'Huxol A, Davis A, Villmer F-J, Scheideler E. Deployment of Process Capability Analysis for Single-Part Production. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Publication series in direct digital manufacturing . Lemgo; 2017:63-74.' apa: Huxol, A., Davis, A., Villmer, F.-J., & Scheideler, E. (2017). Deployment of Process Capability Analysis for Single-Part Production. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 63–74). Lemgo. bjps: Huxol A et al. (2017) Deployment of Process Capability Analysis for Single-Part Production. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 63–74. chicago: Huxol, Andrea, Andrea Davis, Franz-Josef Villmer, and Eva Scheideler. “Deployment of Process Capability Analysis for Single-Part Production.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 63–74. Publication Series in Direct Digital Manufacturing . Lemgo, 2017. chicago-de: 'Huxol, Andrea, Andrea Davis, Franz-Josef Villmer und Eva Scheideler. 2017. Deployment of Process Capability Analysis for Single-Part Production. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 63–74. Publication series in direct digital manufacturing . Lemgo.' din1505-2-1: 'Huxol, Andrea ; Davis, Andrea ; Villmer, Franz-Josef ; Scheideler, Eva: Deployment of Process Capability Analysis for Single-Part Production. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management, Publication series in direct digital manufacturing . Lemgo, 2017, S. 63–74' havard: 'A. Huxol, A. Davis, F.-J. Villmer, E. Scheideler, Deployment of Process Capability Analysis for Single-Part Production, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017: pp. 63–74.' ieee: A. Huxol, A. Davis, F.-J. Villmer, and E. Scheideler, “Deployment of Process Capability Analysis for Single-Part Production,” in Production Engineering and Management, Pordenone, Italy, 2017, no. 1, pp. 63–74. mla: Huxol, Andrea, et al. “Deployment of Process Capability Analysis for Single-Part Production.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2017, pp. 63–74. short: 'A. Huxol, A. Davis, F.-J. Villmer, E. Scheideler, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017, pp. 63–74.' ufg: 'Huxol, Andrea et. al. (2017): Deployment of Process Capability Analysis for Single-Part Production, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management (=Publication series in direct digital manufacturing ), Lemgo, S. 63–74.' van: 'Huxol A, Davis A, Villmer F-J, Scheideler E. Deployment of Process Capability Analysis for Single-Part Production. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2017. p. 63–74. (Publication series in direct digital manufacturing ).' conference: end_date: 2017-09-29 location: Pordenone, Italy name: Proceedings7th International Conference start_date: 2017-09-28 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T11:16:07Z date_updated: 2023-03-15T13:50:01Z department: - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer issue: '1' keyword: - Statistical process control - Process capability analysis - Single-part production - Process optimization language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf oa: '1' page: 63-74 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-946856-01-6 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf series_title: 'Publication series in direct digital manufacturing ' status: public title: Deployment of Process Capability Analysis for Single-Part Production type: conference user_id: '45673' year: 2017 ... --- _id: '328' abstract: - lang: eng text: "In this paper, concepts for an extended DC network for the main power supply of components from various manufacturers in industrial production are presented. In the first part, detailed requirements for such a network are given \ from the viewpoint of a customer. Based on those, different concepts for AC/DC conversion and energy management are discussed. As far as AC/DC conversion \ is concerned, the advantages and drawbacks of several rectifier topologies are listed, as they have a significant impact on the system behavior and \ EMC properties. \r\nAn intelligent energy management can improve the \ energy efficiency and reduce downtimes of a plant, which are major requirements from a customer’s viewpoint. " author: - first_name: Holger full_name: Borcherding, Holger id: '1693' last_name: Borcherding - first_name: Johann full_name: Austermann, Johann id: '42114' last_name: Austermann - first_name: Timm full_name: Kuhlmann, Timm last_name: Kuhlmann - first_name: Benno full_name: Weis, Benno last_name: Weis - first_name: Andre full_name: Leonide, Andre last_name: Leonide citation: ama: 'Borcherding H, Austermann J, Kuhlmann T, Weis B, Leonide A. Concepts for a DC Network in Industrial Production. In: Institute of Electrical and Electronics Engineers (IEEE), ed. 2017 IEEE Second International Conference on DC Microgrids (ICDCM). Danvers; 2017:227-234. doi:10.1109/ICDCM.2017.8001049' apa: Borcherding, H., Austermann, J., Kuhlmann, T., Weis, B., & Leonide, A. (2017). Concepts for a DC Network in Industrial Production. In Institute of Electrical and Electronics Engineers (IEEE) (Ed.), 2017 IEEE Second International Conference on DC Microgrids (ICDCM) (pp. 227–234). Danvers. https://doi.org/10.1109/ICDCM.2017.8001049 bjps: Borcherding H et al. (2017) Concepts for a DC Network in Industrial Production. In Institute of Electrical and Electronics Engineers (IEEE) (ed.), 2017 IEEE Second International Conference on DC Microgrids (ICDCM). Danvers, pp. 227–234. chicago: Borcherding, Holger, Johann Austermann, Timm Kuhlmann, Benno Weis, and Andre Leonide. “Concepts for a DC Network in Industrial Production.” In 2017 IEEE Second International Conference on DC Microgrids (ICDCM), edited by Institute of Electrical and Electronics Engineers (IEEE), 227–34. Danvers, 2017. https://doi.org/10.1109/ICDCM.2017.8001049. chicago-de: 'Borcherding, Holger, Johann Austermann, Timm Kuhlmann, Benno Weis und Andre Leonide. 2017. Concepts for a DC Network in Industrial Production. In: 2017 IEEE Second International Conference on DC Microgrids (ICDCM), hg. von Institute of Electrical and Electronics Engineers (IEEE), 227–234. Danvers. doi:10.1109/ICDCM.2017.8001049, .' din1505-2-1: 'Borcherding, Holger ; Austermann, Johann ; Kuhlmann, Timm ; Weis, Benno ; Leonide, Andre: Concepts for a DC Network in Industrial Production. In: Institute of Electrical and Electronics Engineers (IEEE) (Hrsg.): 2017 IEEE Second International Conference on DC Microgrids (ICDCM). Danvers, 2017, S. 227–234' havard: 'H. Borcherding, J. Austermann, T. Kuhlmann, B. Weis, A. Leonide, Concepts for a DC Network in Industrial Production, in: Institute of Electrical and Electronics Engineers (IEEE) (Ed.), 2017 IEEE Second International Conference on DC Microgrids (ICDCM), Danvers, 2017: pp. 227–234.' ieee: H. Borcherding, J. Austermann, T. Kuhlmann, B. Weis, and A. Leonide, “Concepts for a DC Network in Industrial Production,” in 2017 IEEE Second International Conference on DC Microgrids (ICDCM), Nürnberg, 2017, no. 1, pp. 227–234. mla: Borcherding, Holger, et al. “Concepts for a DC Network in Industrial Production.” 2017 IEEE Second International Conference on DC Microgrids (ICDCM), edited by Institute of Electrical and Electronics Engineers (IEEE), no. 1, 2017, pp. 227–34, doi:10.1109/ICDCM.2017.8001049. short: 'H. Borcherding, J. Austermann, T. Kuhlmann, B. Weis, A. Leonide, in: Institute of Electrical and Electronics Engineers (IEEE) (Ed.), 2017 IEEE Second International Conference on DC Microgrids (ICDCM), Danvers, 2017, pp. 227–234.' ufg: 'Borcherding, Holger et. al. (2017): Concepts for a DC Network in Industrial Production, in: Institute of Electrical and Electronics Engineers (IEEE) (Hg.): 2017 IEEE Second International Conference on DC Microgrids (ICDCM), Danvers, S. 227–234.' van: 'Borcherding H, Austermann J, Kuhlmann T, Weis B, Leonide A. Concepts for a DC Network in Industrial Production. In: Institute of Electrical and Electronics Engineers (IEEE), editor. 2017 IEEE Second International Conference on DC Microgrids (ICDCM). Danvers; 2017. p. 227–34.' conference: end_date: 2017-06-29 location: Nürnberg name: 'IEEE Second International Conference on DC Microgrids (ICDCM) ' start_date: 2017-06-27 corporate_editor: - Institute of Electrical and Electronics Engineers (IEEE) date_created: 2018-12-10T15:11:18Z date_updated: 2023-03-15T13:49:46Z department: - _id: DEP5018 doi: 10.1109/ICDCM.2017.8001049 issue: '1' keyword: - AC-DC power convertors - electromagnetic compatibility - energy conservation - energy management systems - rectifiers - main power supply - industrial production - DC network - AC-DC conversion - rectifier topologies - EMC properties - intelligent energy management - energy efficiency improvement - downtime reduction - Rectifiers - Switches - Voltage control - Topology - Network topology - Production - Grounding - industrial DC grid - SMART Grid language: - iso: eng main_file_link: - url: https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8001049 page: 227-234 place: Danvers publication: 2017 IEEE Second International Conference on DC Microgrids (ICDCM) related_material: link: - relation: contains url: https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8001049 status: public title: Concepts for a DC Network in Industrial Production type: conference user_id: '45673' year: 2017 ... --- _id: '586' abstract: - lang: eng text: Under the circumstance of advanced globalization, it is increasingly difficult for production companies to remain competitiveness. Many of them are forced to restrict budget and reduce production costs. In addition, the customization of product increases continuously. This results in extension of product variation and reduction of product life cycle. Therefore, the companies need a high flexibility to respond quickly to changes in the market and to customer requirements. Lean thinking, as a powerful tool, has been implemented by many companies in production and manufacturing. In order to avoid waste in lean manufacturing, it is necessary to manage efficiently the material flow. In this study, for a lean material handling system in the lean manufacturing of a company, an in-plant milk-run distribution system is taken into consideration. The system consistsof vehicles, which move periodically in certain routes. The materials are delivered in short intervals from a central storage area to several points of use in the production. By using milk-run in plant, the material handling processes can be standardized and therefore the waste can be eliminated. One additional aim of the study with milk-run distribution for the material provision is to minimize the handling time, which determines directly the personal costs. In order to realize the aim, the work has beendivided into several steps. At first, the production processes, especially the material provision for the production have been analyzed. Secondly, the technological solutions have been analyzed in order to handle different loading units required by different machines in the production. Thirdly, the milk-run distribution for lean production is formulated as an optimization problem with the object of minimizing the number of vehicles and the distance traveled under the constraints of specific time periods, capacity of vehicle and related stations etc. Fourthly, two optimization methods are developed in order to find the optimal solution for the milk-run problem and the performance of different methods is also compared. author: - first_name: Li full_name: Li, Li id: '58482' last_name: Li - first_name: L. full_name: Schulze, L. last_name: Schulze citation: ama: 'Li L, Schulze L. In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Lemgo; 2016:65-76.' apa: Li, L., & Schulze, L. (2016). In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.) (pp. 65–76). Presented at the Proceedings 6th International Conference, Lemgo. bjps: Li L and Schulze L (2016) In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds). Lemgo, pp. 65–76. chicago: Li, Li, and L. Schulze. “In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production.” edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 65–76. Lemgo, 2016. chicago-de: 'Li, Li und L. Schulze. 2016. In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production. In: , hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 65–76. Lemgo.' din1505-2-1: 'Li, Li ; Schulze, L.: In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): . Lemgo, 2016, S. 65–76' havard: 'L. Li, L. Schulze, In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Lemgo, 2016: pp. 65–76.' ieee: L. Li and L. Schulze, “In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production,” presented at the Proceedings 6th International Conference, Lemgo, 2016, no. 1, pp. 65–76. mla: Li, Li, and L. Schulze. In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production. Edited by Franz-Josef Villmer et al., no. 1, 2016, pp. 65–76. short: 'L. Li, L. Schulze, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Lemgo, 2016, pp. 65–76.' ufg: 'Li, Li/Schulze, L. (2016): In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production, in: Franz-Josef Villmer et. al. (Hgg.): , Lemgo, S. 65–76.' van: 'Li L, Schulze L. In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Lemgo; 2016. p. 65–76.' conference: end_date: 2019-09-30 location: Lemgo name: Proceedings 6th International Conference start_date: 2016-09-29 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T14:39:16Z date_updated: 2023-03-15T13:50:02Z department: - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Milk-Run - Material provision - Lean production - Genetic algorithm language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf oa: '1' page: 65-76 place: Lemgo publication_identifier: isbn: - 978-3-946856-00-9 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf status: public title: In-Plant Milk-Run Distribution for Material Provision Optimization in Lean Production type: conference user_id: '45673' year: 2016 ... --- _id: '432' abstract: - lang: eng text: "The trend of increasing technological complexity of machines mainly correlates with the integration of additional functions in machines. Increasing functionality \ of the machines leads to an increased number of control \r\nelements, which limits the clarity of the machine operation and leads to higher cognitive demands in the machine operation. Due to the growing functional range of production machines the demand of usability for the operating systems continues to \ grow. The selection and design of icons for the identification of controls \ contributes significantly to usability, especially for intuitive operation of production machines. \r\nThe aim of this study is to investigate the \ intuitive usability of production machines, to consider its use of graphical \ elements (icons) and to derive recommendations for a demand-oriented \ selection and design of icons. To achieve this goal, laboratory studies at five modern production machines (laser sintering machine, CNC universal \ lathe, plastic injection molding machine, laser processing machine, woodworking \ machine) - each with different operating concept - were performed. The results \ of the study show that the used symbols in the examined machines are \ only limited self-explanatory and intuitive, and thus have significant deficits for easy and intuitive operation. Especially the combination of screens and electronic keys or switches was often criticized and leads to uncertainty in the operation. As a result, recommendations for the design of icons on production machines are given. " author: - first_name: Daniel full_name: Riediger, Daniel id: '52263' last_name: Riediger - first_name: Sven full_name: Hinrichsen, Sven id: '49010' last_name: Hinrichsen - first_name: Alexander full_name: Schlee, Alexander id: '48127' last_name: Schlee citation: ama: 'Riediger D, Hinrichsen S, Schlee A. Ergonomic Design of Graphical Control Elements on Production Machines. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo: Hochschule Ostwestfalen-Lippe; 2015:123-130.' apa: 'Riediger, D., Hinrichsen, S., & Schlee, A. (2015). Ergonomic Design of Graphical Control Elements on Production Machines. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management, (Eds.), Production Engineering and Management (pp. 123–130). Lemgo: Hochschule Ostwestfalen-Lippe.' bjps: 'Riediger D, Hinrichsen S and Schlee A (2015) Ergonomic Design of Graphical Control Elements on Production Machines. In Villmer F-J, Padoano E and Department of Production Engineering and Management, (eds), Production Engineering and Management. Lemgo: Hochschule Ostwestfalen-Lippe, pp. 123–130.' chicago: 'Riediger, Daniel, Sven Hinrichsen, and Alexander Schlee. “Ergonomic Design of Graphical Control Elements on Production Machines.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 123–30. Lemgo: Hochschule Ostwestfalen-Lippe, 2015.' chicago-de: 'Riediger, Daniel, Sven Hinrichsen und Alexander Schlee. 2015. Ergonomic Design of Graphical Control Elements on Production Machines. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 123–130. Lemgo: Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Riediger, Daniel ; Hinrichsen, Sven ; Schlee, Alexander: Ergonomic Design of Graphical Control Elements on Production Machines. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management, (Hrsg.): Production Engineering and Management. Lemgo : Hochschule Ostwestfalen-Lippe, 2015, S. 123–130' havard: 'D. Riediger, S. Hinrichsen, A. Schlee, Ergonomic Design of Graphical Control Elements on Production Machines, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, (Eds.), Production Engineering and Management, Hochschule Ostwestfalen-Lippe, Lemgo, 2015: pp. 123–130.' ieee: D. Riediger, S. Hinrichsen, and A. Schlee, “Ergonomic Design of Graphical Control Elements on Production Machines,” in Production Engineering and Management, Trieste, 2015, no. 1, pp. 123–130. mla: Riediger, Daniel, et al. “Ergonomic Design of Graphical Control Elements on Production Machines.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, Hochschule Ostwestfalen-Lippe, 2015, pp. 123–30. short: 'D. Riediger, S. Hinrichsen, A. Schlee, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, (Eds.), Production Engineering and Management, Hochschule Ostwestfalen-Lippe, Lemgo, 2015, pp. 123–130.' ufg: 'Riediger, Daniel et. al. (2015): Ergonomic Design of Graphical Control Elements on Production Machines, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 123–130.' van: 'Riediger D, Hinrichsen S, Schlee A. Ergonomic Design of Graphical Control Elements on Production Machines. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo: Hochschule Ostwestfalen-Lippe; 2015. p. 123–30.' conference: end_date: 2015-10-02 location: Trieste name: Proceedings 5th international conference start_date: 2015-10-01 corporate_editor: - Department of Production Engineering and Management, - Hochschule Ostwestfalen-Lippe date_created: 2019-01-16T16:07:56Z date_updated: 2023-03-15T13:49:52Z department: - _id: DEP7020 - _id: DEP1306 - _id: DEP1305 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Usability - production mach ine - icons - usability - hum an-machine compatibility language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fb7/fileadmin/download/labore/industrialengineering/pdf/Veroeffentlichungen/PEM2015_Ergonomic_Design_of_Graphical_Control_Elements_on_Production_Machines.pdf oa: '1' page: 123-130 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-941645-11-0 publication_status: published publisher: Hochschule Ostwestfalen-Lippe related_material: link: - relation: contains url: https://www.hs-owl.de/fb7/fileadmin/download/labore/industrialengineering/pdf/Veroeffentlichungen/PEM2015_Ergonomic_Design_of_Graphical_Control_Elements_on_Production_Machines.pdf status: public title: Ergonomic Design of Graphical Control Elements on Production Machines type: conference user_id: '45673' year: 2015 ... --- _id: '4329' abstract: - lang: eng text: The term Industrie 4.0 carries the vision of smart factories, which automatically adapt to changes and assist the human as much as possible during operation and maintenance. This includes smart human machine interfaces, which reduce the chances of errors and help to make the right decisions. This paper presents an approach to equip the maintenance software running on a tablet PC with augmented reality functionality to be able to place virtual sticky notes at production modules. Additionally, these sticky notes are enriched with position information. The central element of this approach is an ontology-based context-aware framework, which aggregates and processes data from different sources. As a result, a tablet PC application was implemented, which allows displaying maintenance information as well as live plant process data in the form of augmented reality. More than 100 of those sticky notes can be placed using this system, whereas each note requires a file size of 12 to 16 kilo bytes. After placing a sticky note, the system recognizes it even if the camera's position is not exactly the same as during the placing process. author: - first_name: Holger full_name: Flatt, Holger id: '58494' last_name: Flatt - first_name: Nils full_name: Koch, Nils last_name: Koch - first_name: Andrei full_name: Guenter, Andrei last_name: Guenter - first_name: Carsten full_name: Röcker, Carsten id: '61525' last_name: Röcker - first_name: Jürgen full_name: Jasperneite, Jürgen id: '1899' last_name: Jasperneite citation: ama: 'Flatt H, Koch N, Guenter A, Röcker C, Jasperneite J. A Context-Aware Assistance System for Maintenance Applications in Smart Factories based on Augmented Reality and Indoor Localization. In: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA). New York: IEEE; 2015. doi:10.1109/ETFA.2015.7301586' apa: 'Flatt, H., Koch, N., Guenter, A., Röcker, C., & Jasperneite, J. (2015). A Context-Aware Assistance System for Maintenance Applications in Smart Factories based on Augmented Reality and Indoor Localization. In 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA). New York: IEEE. https://doi.org/10.1109/ETFA.2015.7301586' bjps: 'Flatt H et al. (2015) A Context-Aware Assistance System for Maintenance Applications in Smart Factories Based on Augmented Reality and Indoor Localization. 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA). New York: IEEE.' chicago: 'Flatt, Holger, Nils Koch, Andrei Guenter, Carsten Röcker, and Jürgen Jasperneite. “A Context-Aware Assistance System for Maintenance Applications in Smart Factories Based on Augmented Reality and Indoor Localization.” In 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA). New York: IEEE, 2015. https://doi.org/10.1109/ETFA.2015.7301586.' chicago-de: 'Flatt, Holger, Nils Koch, Andrei Guenter, Carsten Röcker und Jürgen Jasperneite. 2015. A Context-Aware Assistance System for Maintenance Applications in Smart Factories based on Augmented Reality and Indoor Localization. In: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA). New York: IEEE. doi:10.1109/ETFA.2015.7301586, .' din1505-2-1: 'Flatt, Holger ; Koch, Nils ; Guenter, Andrei ; Röcker, Carsten ; Jasperneite, Jürgen: A Context-Aware Assistance System for Maintenance Applications in Smart Factories based on Augmented Reality and Indoor Localization. In: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA). New York : IEEE, 2015' havard: 'H. Flatt, N. Koch, A. Guenter, C. Röcker, J. Jasperneite, A Context-Aware Assistance System for Maintenance Applications in Smart Factories based on Augmented Reality and Indoor Localization, in: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA), IEEE, New York, 2015.' ieee: H. Flatt, N. Koch, A. Guenter, C. Röcker, and J. Jasperneite, “A Context-Aware Assistance System for Maintenance Applications in Smart Factories based on Augmented Reality and Indoor Localization,” in 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA), Luxembourg, Luxembourg, 2015. mla: Flatt, Holger, et al. “A Context-Aware Assistance System for Maintenance Applications in Smart Factories Based on Augmented Reality and Indoor Localization.” 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA), IEEE, 2015, doi:10.1109/ETFA.2015.7301586. short: 'H. Flatt, N. Koch, A. Guenter, C. Röcker, J. Jasperneite, in: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA), IEEE, New York, 2015.' ufg: 'Flatt, Holger et. al. (2015): A Context-Aware Assistance System for Maintenance Applications in Smart Factories based on Augmented Reality and Indoor Localization, in: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA), New York.' van: 'Flatt H, Koch N, Guenter A, Röcker C, Jasperneite J. A Context-Aware Assistance System for Maintenance Applications in Smart Factories based on Augmented Reality and Indoor Localization. In: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA). New York: IEEE; 2015.' conference: end_date: 2015-09-11 location: Luxembourg, Luxembourg name: 20th Conference on Emerging Technologies & Factory Automation (ETFA) start_date: 2015-09-08 date_created: 2021-01-08T12:03:42Z date_updated: 2023-03-15T13:49:52Z department: - _id: DEP5023 doi: 10.1109/ETFA.2015.7301586 keyword: - Maintenance engineering - Augmented reality - Context - Context modelin - Production facilities - Cameras language: - iso: eng main_file_link: - open_access: '1' oa: '1' place: New York publication: ' 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA)' publication_status: published publisher: IEEE status: public title: A Context-Aware Assistance System for Maintenance Applications in Smart Factories based on Augmented Reality and Indoor Localization type: conference user_id: '15514' year: 2015 ... --- _id: '597' abstract: - lang: eng text: "This paper is aimed to discuss current research using data mining techniques and industry statistics in production environments. The general research approach is based on the idea of using data mining processes and techniques of industry statistics to find rare and hidden patterns behind failures of complex components. A case study will be applied to illustrate how the technique is carried out and where the limits of this approach occur. The case study deals with a component supplier of printing machines, which received an increasing number of client complaints, all related to one distinct problem. The observed failures seem to occur only among clients with very high quality standards. The affected component undergoes a very complex production process with several steps in different departments. Every single production unit records data information from multiple process variables and at different points in time. In the beginning there was no understanding of the failure causes in production at all. Therefore a huge amount of production data had to be analyzed to find the pattern that discloses the failure.\r\nThe data mining process starts with a first step in which the given data sets are prepared and then cleaned. Followed up by building a prediction model. The aim is to detect the root causes for failures and to predict potential failures in affected components. This paper shows how to use data mining to get the answer on pressing production failures.\r\n" author: - first_name: Eva full_name: Scheideler, Eva id: '61522' last_name: Scheideler - first_name: Andrea full_name: Ahlemeyer-Stubbe, Andrea last_name: Ahlemeyer-Stubbe citation: ama: 'Scheideler E, Ahlemeyer-Stubbe A. Data Mining: A Potential Detector to Find Failure in Complex Components. In: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy. Hochschule Ostwestfalen-Lippe; 2015:163-174.' apa: 'Scheideler, E., & Ahlemeyer-Stubbe, A. (2015). Data Mining: A Potential Detector to Find Failure in Complex Components. In E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe (Eds.), Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy (Issue 1, pp. 163–174). Hochschule Ostwestfalen-Lippe.' bjps: 'Scheideler E and Ahlemeyer-Stubbe A (2015) Data Mining: A Potential Detector to Find Failure in Complex Components. In Padoano E et al. (eds), Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy. Lemgo: Hochschule Ostwestfalen-Lippe, pp. 163–174.' chicago: 'Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Data Mining: A Potential Detector to Find Failure in Complex Components.” In Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy, edited by Elio Padoano, Franz-Josef Villmer, Department of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, 163–74. Lemgo: Hochschule Ostwestfalen-Lippe, 2015.' chicago-de: 'Scheideler, Eva und Andrea Ahlemeyer-Stubbe. 2015. Data Mining: A Potential Detector to Find Failure in Complex Components. In: Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy, hg. von Elio Padoano, Franz-Josef Villmer, Department of Production Engineering and Management, und Hochschule Ostwestfalen-Lippe, 163–174. Lemgo: Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Scheideler, Eva ; Ahlemeyer-Stubbe, Andrea: Data Mining: A Potential Detector to Find Failure in Complex Components. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management ; Hochschule Ostwestfalen-Lippe (Hrsg.): Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy. Lemgo : Hochschule Ostwestfalen-Lippe, 2015, S. 163–174' havard: 'E. Scheideler, A. Ahlemeyer-Stubbe, Data Mining: A Potential Detector to Find Failure in Complex Components, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy, Hochschule Ostwestfalen-Lippe, Lemgo, 2015: pp. 163–174.' ieee: 'E. Scheideler and A. Ahlemeyer-Stubbe, “Data Mining: A Potential Detector to Find Failure in Complex Components,” in Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy, Trieste, Italy, 2015, no. 1, pp. 163–174.' mla: 'Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Data Mining: A Potential Detector to Find Failure in Complex Components.” Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy, edited by Elio Padoano et al., no. 1, Hochschule Ostwestfalen-Lippe, 2015, pp. 163–74.' short: 'E. Scheideler, A. Ahlemeyer-Stubbe, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy, Hochschule Ostwestfalen-Lippe, Lemgo, 2015, pp. 163–174.' ufg: 'Scheideler, Eva/Ahlemeyer-Stubbe, Andrea: Data Mining: A Potential Detector to Find Failure in Complex Components, in: Padoano, Elio u. a. (Hgg.): Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy, Lemgo 2015,  S. 163–174.' van: 'Scheideler E, Ahlemeyer-Stubbe A. Data Mining: A Potential Detector to Find Failure in Complex Components. In: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, editors. Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy. Lemgo: Hochschule Ostwestfalen-Lippe; 2015. p. 163–74.' conference: end_date: 2015-10-02 location: Trieste, Italy name: '5th International Conference "Production Engineering and Management" ' start_date: 2015-10-01 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-19T07:15:57Z date_updated: 2024-03-22T13:12:47Z department: - _id: DEP7000 - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer issue: '1' keyword: - Data mining - production failure - multi-variant analysis - multivariate process control - predictive modelling - case study language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf oa: '1' page: 163-174 place: Lemgo publication: 'Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy' publication_identifier: isbn: - 978-3-941645-11-0 publication_status: published publisher: Hochschule Ostwestfalen-Lippe related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf status: public title: 'Data Mining: A Potential Detector to Find Failure in Complex Components' type: conference user_id: '83781' year: '2015' ... --- _id: '2141' abstract: - lang: eng text: Sensor and information fusion is recently a major topic which becomes important in machine diagnosis and conditioning for complex production machines and process engineering. It is a known fact that distributed automation systems have a major impact on signal processing and pattern recognition for machine diagnosis. Therefore, it is necessary to research and develop smart diagnosis methods which are applicable for distributed systems like resource-limited cyber-physical systems. In this paper we propose an new approach for sensor and information fusion based on Evidence Theory and socio-psychological decision-making. We show that context based condition monitoring is instantiated even in conflict situations, oc-curing in real life scenarios permanently. A simple but effective importance measure is proposed which controls the significance of conditioning propositions in a system. author: - first_name: Uwe full_name: Mönks, Uwe id: '1825' last_name: Mönks - first_name: Volker full_name: Lohweg, Volker id: '1804' last_name: Lohweg orcid: 0000-0002-3325-7887 citation: ama: 'Mönks U, Lohweg V. Machine Conditioning by Importance Controlled Information Fusion. In: IEEE, ed. 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy; 2013. doi:10.1109/ETFA.2013.6647984' apa: Mönks, U., & Lohweg, V. (2013). Machine Conditioning by Importance Controlled Information Fusion. In IEEE (Ed.), 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy. https://doi.org/10.1109/ETFA.2013.6647984 bjps: Mönks U and Lohweg V (2013) Machine Conditioning by Importance Controlled Information Fusion. In IEEE (ed.), 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy. chicago: Mönks, Uwe, and Volker Lohweg. “Machine Conditioning by Importance Controlled Information Fusion.” In 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), edited by IEEE. Cagliari, Italy, 2013. https://doi.org/10.1109/ETFA.2013.6647984. chicago-de: 'Mönks, Uwe und Volker Lohweg. 2013. Machine Conditioning by Importance Controlled Information Fusion. In: 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), hg. von IEEE. Cagliari, Italy. doi:10.1109/ETFA.2013.6647984, .' din1505-2-1: 'Mönks, Uwe ; Lohweg, Volker: Machine Conditioning by Importance Controlled Information Fusion. In: IEEE (Hrsg.): 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy, 2013' havard: 'U. Mönks, V. Lohweg, Machine Conditioning by Importance Controlled Information Fusion, in: IEEE (Ed.), 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Cagliari, Italy, 2013.' ieee: U. Mönks and V. Lohweg, “Machine Conditioning by Importance Controlled Information Fusion,” in 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2013. mla: Mönks, Uwe, and Volker Lohweg. “Machine Conditioning by Importance Controlled Information Fusion.” 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), edited by IEEE, 2013, doi:10.1109/ETFA.2013.6647984. short: 'U. Mönks, V. Lohweg, in: IEEE (Ed.), 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Cagliari, Italy, 2013.' ufg: 'Mönks, Uwe/Lohweg, Volker (2013): Machine Conditioning by Importance Controlled Information Fusion, in: IEEE (Hg.): 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Cagliari, Italy.' van: 'Mönks U, Lohweg V. Machine Conditioning by Importance Controlled Information Fusion. In: IEEE, editor. 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy; 2013.' corporate_editor: - IEEE date_created: 2019-12-04T09:30:15Z date_updated: 2023-03-15T13:49:39Z department: - _id: DEP5023 doi: 10.1109/ETFA.2013.6647984 keyword: - Decision making - Robot sensing systems - Reliability - Production - Context - Fuzzy set theory - Data integration language: - iso: eng place: Cagliari, Italy publication: 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) publication_identifier: eisbn: - 978-1-4799-0864-6 eissn: - '1946-0759 ' isbn: - 978-1-4799-0862-2 issn: - '1946-0740 ' publication_status: published status: public title: Machine Conditioning by Importance Controlled Information Fusion type: conference user_id: '45673' year: 2013 ... --- _id: '2394' abstract: - lang: eng text: For the production of biopharmaceuticals a seed train is required to generate an adequate number of cells for inoculation of the production bioreactor. This seed train is time- and cost-intensive but offers potential for optimization. A method and a protocol are described for the seed train mapping, directed modeling without major effort, and its optimization regarding selected optimization criteria such as optimal points in time for cell passaging. Furthermore, the method can also be applied for the set-up of a new seed train, for example for a new cell line. Although the chapter is directed towards suspension cell lines, the method is also generally applicable, e.g. for adherent cell lines. author: - first_name: Björn full_name: Frahm, Björn last_name: Frahm citation: ama: 'Frahm B. Seed Train Optimization for Cell Culture. In: Animal Cell Biotechnology. Vol 1104. Methods in Molecular Biology . Totowa, NJ: Humana Press; 2013:355-367. doi:10.1007/978-1-62703-733-4_22' apa: 'Frahm, B. (2013). Seed Train Optimization for Cell Culture. In Animal Cell Biotechnology (Vol. 1104, pp. 355–367). Totowa, NJ: Humana Press. https://doi.org/10.1007/978-1-62703-733-4_22' bjps: 'Frahm B (2013) Seed Train Optimization for Cell Culture. Animal Cell Biotechnology, vol. 1104. Totowa, NJ: Humana Press, pp. 355–367.' chicago: 'Frahm, Björn. “Seed Train Optimization for Cell Culture.” In Animal Cell Biotechnology, 1104:355–67. Methods in Molecular Biology . Totowa, NJ: Humana Press, 2013. https://doi.org/10.1007/978-1-62703-733-4_22.' chicago-de: 'Frahm, Björn. 2013. Seed Train Optimization for Cell Culture. In: Animal Cell Biotechnology, 1104:355–367. Methods in Molecular Biology . Totowa, NJ: Humana Press. doi:10.1007/978-1-62703-733-4_22, .' din1505-2-1: 'Frahm, Björn: Seed Train Optimization for Cell Culture. In: Animal Cell Biotechnology, Methods in Molecular Biology . Bd. 1104. Totowa, NJ : Humana Press, 2013, S. 355–367' havard: 'B. Frahm, Seed Train Optimization for Cell Culture, in: Animal Cell Biotechnology, Humana Press, Totowa, NJ, 2013: pp. 355–367.' ieee: 'B. Frahm, “Seed Train Optimization for Cell Culture,” in Animal Cell Biotechnology, vol. 1104, Totowa, NJ: Humana Press, 2013, pp. 355–367.' mla: Frahm, Björn. “Seed Train Optimization for Cell Culture.” Animal Cell Biotechnology, vol. 1104, Humana Press, 2013, pp. 355–67, doi:10.1007/978-1-62703-733-4_22. short: 'B. Frahm, in: Animal Cell Biotechnology, Humana Press, Totowa, NJ, 2013, pp. 355–367.' ufg: 'Frahm, Björn (2013): Seed Train Optimization for Cell Culture, in: Animal Cell Biotechnology (=Methods in Molecular Biology 1104), Totowa, NJ, S. 355–367.' van: 'Frahm B. Seed Train Optimization for Cell Culture. In: Animal Cell Biotechnology. Totowa, NJ: Humana Press; 2013. p. 355–67. (Methods in Molecular Biology ; vol. 1104).' date_created: 2020-05-19T14:45:43Z date_updated: 2023-03-15T13:49:39Z department: - _id: DEP4021 doi: 10.1007/978-1-62703-733-4_22 intvolume: ' 1104' keyword: - Seed train Optimization Modeling Prediction Space-Time-Yield (STY) Systems approach Bioinformatics Computational biotechnology Suspension Production language: - iso: eng page: 355-367 place: Totowa, NJ publication: Animal Cell Biotechnology publication_identifier: eisbn: - '9781627037334' isbn: - '9781627037327' issn: - 1064-3745 - 1940-6029 publication_status: published publisher: Humana Press series_title: 'Methods in Molecular Biology ' status: public title: Seed Train Optimization for Cell Culture type: book_chapter user_id: '74004' volume: 1104 year: 2013 ... --- _id: '10214' abstract: - lang: eng text: For the production of biopharmaceuticals a seed train is required to generate an adequate number of cells for inoculation of the production bioreactor. This seed train is time- and cost-intensive but offers potential for optimization. A method and a protocol are described for the seed train mapping, directed modeling without major effort, and its optimization regarding selected optimization criteria such as optimal points in time for cell passaging. Furthermore, the method can also be applied for the set-up of a new seed train, for example for a new cell line. Although the chapter is directed towards suspension cell lines, the method is also generally applicable, e.g. for adherent cell lines. author: - first_name: Björn full_name: Frahm, Björn id: '45666' last_name: Frahm citation: ama: 'Frahm B. Seed Train Optimization for Cell Culture. In: Pörtner R, ed. Animal Cell Biotechnology - Methods and Protocols. Vol 1104. 3rd ed. Methods in Molecular Biology. Humana Press; 2013:355-367. doi:10.1007/978-1-62703-733-4_22' apa: Frahm, B. (2013). Seed Train Optimization for Cell Culture. In R. Pörtner (Ed.), Animal Cell Biotechnology - Methods and Protocols (3rd ed., Vol. 1104, pp. 355–367). Humana Press. https://doi.org/10.1007/978-1-62703-733-4_22 bjps: 'Frahm B (2013) Seed Train Optimization for Cell Culture. In Pörtner R (ed.), Animal Cell Biotechnology - Methods and Protocols, 3rd ed., vol. 1104. Totowa, NJ: Humana Press, pp. 355–367.' chicago: 'Frahm, Björn. “Seed Train Optimization for Cell Culture.” In Animal Cell Biotechnology - Methods and Protocols, edited by Ralf Pörtner, 3rd ed., 1104:355–67. Methods in Molecular Biology. Totowa, NJ: Humana Press, 2013. https://doi.org/10.1007/978-1-62703-733-4_22.' chicago-de: 'Frahm, Björn. 2013. Seed Train Optimization for Cell Culture. In: Animal Cell Biotechnology - Methods and Protocols, hg. von Ralf Pörtner, 1104:355–367. 3. Aufl. Methods in Molecular Biology. Totowa, NJ: Humana Press. doi:10.1007/978-1-62703-733-4_22, .' din1505-2-1: 'Frahm, Björn: Seed Train Optimization for Cell Culture. In: Pörtner, R. (Hrsg.): Animal Cell Biotechnology - Methods and Protocols, Methods in Molecular Biology. Bd. 1104. 3. Aufl. Totowa, NJ : Humana Press, 2013, S. 355–367' havard: 'B. Frahm, Seed Train Optimization for Cell Culture, in: R. Pörtner (Ed.), Animal Cell Biotechnology - Methods and Protocols, 3rd ed., Humana Press, Totowa, NJ, 2013: pp. 355–367.' ieee: 'B. Frahm, “Seed Train Optimization for Cell Culture,” in Animal Cell Biotechnology - Methods and Protocols, 3rd ed., vol. 1104, R. Pörtner, Ed. Totowa, NJ: Humana Press, 2013, pp. 355–367. doi: 10.1007/978-1-62703-733-4_22.' mla: Frahm, Björn. “Seed Train Optimization for Cell Culture.” Animal Cell Biotechnology - Methods and Protocols, edited by Ralf Pörtner, 3rd ed., vol. 1104, Humana Press, 2013, pp. 355–67, https://doi.org/10.1007/978-1-62703-733-4_22. short: 'B. Frahm, in: R. Pörtner (Ed.), Animal Cell Biotechnology - Methods and Protocols, 3rd ed., Humana Press, Totowa, NJ, 2013, pp. 355–367.' ufg: 'Frahm, Björn: Seed Train Optimization for Cell Culture, in: Pörtner, Ralf (Hg.): Animal Cell Biotechnology - Methods and Protocols, Bd. 1104, Totowa, NJ 32013 (Methods in Molecular Biology),  S. 355–367.' van: 'Frahm B. Seed Train Optimization for Cell Culture. In: Pörtner R, editor. Animal Cell Biotechnology - Methods and Protocols. 3rd ed. Totowa, NJ: Humana Press; 2013. p. 355–67. (Methods in Molecular Biology; vol. 1104).' date_created: 2023-08-14T17:50:56Z date_updated: 2023-08-16T06:41:21Z department: - _id: DEP4000 doi: 10.1007/978-1-62703-733-4_22 edition: '3' editor: - first_name: Ralf full_name: Pörtner, Ralf last_name: Pörtner intvolume: ' 1104' keyword: - Seed train - Optimization - Modeling - Prediction - Space-Time-Yield (STY) - Systems approach - Bioinformatics - Computational biotechnology - Suspension - Production language: - iso: eng page: 355–367 place: Totowa, NJ publication: Animal Cell Biotechnology - Methods and Protocols publication_identifier: eisbn: - 978-1-62703-733-4 eissn: - 1940-6029 isbn: - 978-1-62703-732-7 issn: - 1064-3745 publication_status: published publisher: Humana Press series_title: Methods in Molecular Biology status: public title: Seed Train Optimization for Cell Culture type: book_chapter user_id: '83781' volume: 1104 year: '2013' ... --- _id: '2107' abstract: - lang: eng text: In this paper we propose a novel, extended perspective on evidential aggregation rules in machine condition monitoring. First, aspects regarding the interconnections between Dempster-Shafer, Fuzzy Set, and Possibility Theory are shown. Subsequently, a novel approach for direct determination of basic probability assignments using Fuzzy membership functions is proposed. Finally, it is applied to a pipe extrusion line's condition monitoring system, considering and reducing pairwise conflicts. author: - first_name: Uwe full_name: Mönks, Uwe id: '1825' last_name: Mönks - first_name: Karl full_name: Voth, Karl last_name: Voth - first_name: Volker full_name: Lohweg, Volker id: '1804' last_name: Lohweg orcid: 0000-0002-3325-7887 citation: ama: 'Mönks U, Voth K, Lohweg V. An Extended Perspective on Evidential Aggregation Rules in Machine Conditioning. In: IEEE CIP 2012, Third International Workshop on Cognitive Information Processing, May 28-30 2012, Parador de Baiona, Spain. ; 2012. doi:10.1109/CIP.2012.6232905' apa: Mönks, U., Voth, K., & Lohweg, V. (2012). An Extended Perspective on Evidential Aggregation Rules in Machine Conditioning. In IEEE CIP 2012, Third International Workshop on Cognitive Information Processing, May 28-30 2012, Parador de Baiona, Spain. https://doi.org/10.1109/CIP.2012.6232905 bjps: Mönks U, Voth K and Lohweg V (2012) An Extended Perspective on Evidential Aggregation Rules in Machine Conditioning. IEEE CIP 2012, Third International Workshop on Cognitive Information Processing, May 28-30 2012, Parador de Baiona, Spain. chicago: Mönks, Uwe, Karl Voth, and Volker Lohweg. “An Extended Perspective on Evidential Aggregation Rules in Machine Conditioning.” In IEEE CIP 2012, Third International Workshop on Cognitive Information Processing, May 28-30 2012, Parador de Baiona, Spain, 2012. https://doi.org/10.1109/CIP.2012.6232905. chicago-de: 'Mönks, Uwe, Karl Voth und Volker Lohweg. 2012. An Extended Perspective on Evidential Aggregation Rules in Machine Conditioning. In: IEEE CIP 2012, Third International Workshop on Cognitive Information Processing, May 28-30 2012, Parador de Baiona, Spain. doi:10.1109/CIP.2012.6232905, .' din1505-2-1: 'Mönks, Uwe ; Voth, Karl ; Lohweg, Volker: An Extended Perspective on Evidential Aggregation Rules in Machine Conditioning. In: IEEE CIP 2012, Third International Workshop on Cognitive Information Processing, May 28-30 2012, Parador de Baiona, Spain, 2012' havard: 'U. Mönks, K. Voth, V. Lohweg, An Extended Perspective on Evidential Aggregation Rules in Machine Conditioning, in: IEEE CIP 2012, Third International Workshop on Cognitive Information Processing, May 28-30 2012, Parador de Baiona, Spain, 2012.' ieee: U. Mönks, K. Voth, and V. Lohweg, “An Extended Perspective on Evidential Aggregation Rules in Machine Conditioning,” in IEEE CIP 2012, Third International Workshop on Cognitive Information Processing, May 28-30 2012, Parador de Baiona, Spain, 2012. mla: Mönks, Uwe, et al. “An Extended Perspective on Evidential Aggregation Rules in Machine Conditioning.” IEEE CIP 2012, Third International Workshop on Cognitive Information Processing, May 28-30 2012, Parador de Baiona, Spain, 2012, doi:10.1109/CIP.2012.6232905. short: 'U. Mönks, K. Voth, V. Lohweg, in: IEEE CIP 2012, Third International Workshop on Cognitive Information Processing, May 28-30 2012, Parador de Baiona, Spain, 2012.' ufg: 'Mönks, Uwe et. al. (2012): An Extended Perspective on Evidential Aggregation Rules in Machine Conditioning, in: IEEE CIP 2012, Third International Workshop on Cognitive Information Processing, May 28-30 2012, Parador de Baiona, Spain.' van: 'Mönks U, Voth K, Lohweg V. An Extended Perspective on Evidential Aggregation Rules in Machine Conditioning. In: IEEE CIP 2012, Third International Workshop on Cognitive Information Processing, May 28-30 2012, Parador de Baiona, Spain. 2012.' date_created: 2019-12-03T06:40:20Z date_updated: 2023-03-15T13:49:38Z department: - _id: DEP5023 doi: 10.1109/CIP.2012.6232905 keyword: - Sensor phenomena and characterization - Production - Sensor fusion - Fuzzy set theory - Conferences - Possibility theory language: - iso: eng main_file_link: - url: https://ieeexplore.ieee.org/abstract/document/6232905/keywords#keywords publication: IEEE CIP 2012, Third International Workshop on Cognitive Information Processing, May 28-30 2012, Parador de Baiona, Spain publication_identifier: eisbn: - 978-1-4673-1878-5 eissn: - '2327-1698 ' isbn: - 978-1-4673-1877-8 issn: - '2327-1671 ' publication_status: published status: public title: An Extended Perspective on Evidential Aggregation Rules in Machine Conditioning type: conference user_id: '45673' year: 2012 ... --- _id: '1045' abstract: - lang: eng text: In the context of the increasing use of new portable evices, the potential of binaural recording techniques is being reconsidered. This kind of recording technique simulates human hearing and provides a 3D recording space, bringing in new mixing possibilities. For this paper, a song has been produced using inaural recording techniques and tested on a group of average listeners. The results suggest great potential for this technique for music production due to the 3D space that it brings but also significant limitation for commercial broadcasting. author: - first_name: Angela-Nicoleta full_name: Seserman, Angela-Nicoleta last_name: Seserman citation: ama: 'Seserman A-N. Binaural Recording Techniques in a Popular Music Production. Lemgo: Hochschule Ostwestfalen-Lippe; 2012.' apa: 'Seserman, A.-N. (2012). Binaural recording techniques in a popular music production. Lemgo: Hochschule Ostwestfalen-Lippe.' bjps: 'Seserman A-N (2012) Binaural Recording Techniques in a Popular Music Production. Lemgo: Hochschule Ostwestfalen-Lippe.' chicago: 'Seserman, Angela-Nicoleta. Binaural Recording Techniques in a Popular Music Production. Lemgo: Hochschule Ostwestfalen-Lippe, 2012.' chicago-de: 'Seserman, Angela-Nicoleta. 2012. Binaural recording techniques in a popular music production. Lemgo: Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Seserman, Angela-Nicoleta: Binaural recording techniques in a popular music production. Lemgo : Hochschule Ostwestfalen-Lippe, 2012' havard: A.-N. Seserman, Binaural recording techniques in a popular music production, Hochschule Ostwestfalen-Lippe, Lemgo, 2012. ieee: 'A.-N. Seserman, Binaural recording techniques in a popular music production. Lemgo: Hochschule Ostwestfalen-Lippe, 2012.' mla: Seserman, Angela-Nicoleta. Binaural Recording Techniques in a Popular Music Production. Hochschule Ostwestfalen-Lippe, 2012. short: A.-N. Seserman, Binaural Recording Techniques in a Popular Music Production, Hochschule Ostwestfalen-Lippe, Lemgo, 2012. ufg: 'Seserman, Angela-Nicoleta (2012): Binaural recording techniques in a popular music production, Lemgo.' van: 'Seserman A-N. Binaural recording techniques in a popular music production. Lemgo: Hochschule Ostwestfalen-Lippe; 2012. 46 p.' date_created: 2019-04-16T09:14:29Z date_updated: 2023-03-15T13:49:34Z ddc: - '770' department: - _id: DEP2001 file: - access_level: local content_type: application/pdf creator: hemke date_created: 2019-04-16T09:17:52Z date_updated: 2019-04-16T09:17:52Z file_id: '1046' file_name: Binaural_Recording_Techniques_in_a_Popular_Music_Production_Angela_Seserman_Master_Thesis.pdf file_size: 3865227 relation: main_file file_date_updated: 2019-04-16T09:17:52Z has_accepted_license: '1' keyword: - binaural recording - 3D sound - music production - Musikproduktion - Sound language: - iso: eng page: '46' place: Lemgo publisher: Hochschule Ostwestfalen-Lippe status: public supervisor: - first_name: Frank full_name: Lechtenberg, Frank id: '10784' last_name: Lechtenberg - first_name: Malte full_name: Kob, Malte last_name: Kob title: Binaural recording techniques in a popular music production type: master_thesis user_id: '15514' year: 2012 ... --- _id: '8274' abstract: - lang: eng text: The need for multiple radio systems in overlapping regions of a factory plant introduces a coexistence problem. The current research challenge is to design and realize radio systems that should be able to achieve a desired quality of service (QoS) in this coexisting environment. Currently transmission resources of hyperspace are not properly exploited. The cognitive radio (CR), which can adapt to the environmental changes by reconfiguring itself, can be used to implement intelligent radio systems to exploit the orthogonal nature of multiple dimensions of hyperspace to maintain the desired QoS in coexisting factory environments. We present initial results of a coexistence optimized CR which can exploit frequency and power, which are two of several dimensions of hyperspace, to improve its QoS in coexisting environments. author: - first_name: Kaleem full_name: Ahmad, Kaleem last_name: Ahmad - first_name: Uwe full_name: Meier, Uwe id: '1143' last_name: Meier - first_name: Andreas full_name: Pape, Andreas last_name: Pape - first_name: Halina full_name: Kwasnicka, Halina last_name: Kwasnicka - first_name: Bjoern full_name: Griese, Bjoern last_name: Griese citation: ama: Ahmad K, Meier U, Pape A, Kwasnicka H, Griese B. A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems. IEEE ; 2009. doi:10.1109/SAHCNW.2009.5172916 apa: Ahmad, K., Meier, U., Pape, A., Kwasnicka, H., & Griese, B. (2009). A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems. In 2009 6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops. 6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops, Rome, Italy . IEEE . https://doi.org/10.1109/SAHCNW.2009.5172916 bjps: 'Ahmad K et al. (2009) A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems. Piscataway, NJ: IEEE .' chicago: 'Ahmad, Kaleem, Uwe Meier, Andreas Pape, Halina Kwasnicka, and Bjoern Griese. A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems. 2009 6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops. Piscataway, NJ: IEEE , 2009. https://doi.org/10.1109/SAHCNW.2009.5172916.' chicago-de: 'Ahmad, Kaleem, Uwe Meier, Andreas Pape, Halina Kwasnicka und Bjoern Griese. 2009. A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems. 2009 6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops. Piscataway, NJ: IEEE . doi:10.1109/SAHCNW.2009.5172916, .' din1505-2-1: 'Ahmad, Kaleem ; Meier, Uwe ; Pape, Andreas ; Kwasnicka, Halina ; Griese, Bjoern: A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems. Piscataway, NJ : IEEE , 2009' havard: K. Ahmad, U. Meier, A. Pape, H. Kwasnicka, B. Griese, A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems, IEEE , Piscataway, NJ, 2009. ieee: 'K. Ahmad, U. Meier, A. Pape, H. Kwasnicka, and B. Griese, A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems. Piscataway, NJ: IEEE , 2009. doi: 10.1109/SAHCNW.2009.5172916.' mla: Ahmad, Kaleem, et al. “A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems.” 2009 6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops, IEEE , 2009, https://doi.org/10.1109/SAHCNW.2009.5172916. short: K. Ahmad, U. Meier, A. Pape, H. Kwasnicka, B. Griese, A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems, IEEE , Piscataway, NJ, 2009. ufg: 'Ahmad, Kaleem u. a.: A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems, Piscataway, NJ 2009.' van: 'Ahmad K, Meier U, Pape A, Kwasnicka H, Griese B. A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems. 2009 6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops. Piscataway, NJ: IEEE ; 2009.' conference: end_date: 2009-06-26 location: 'Rome, Italy ' name: 6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops start_date: 2009-06-22 date_created: 2022-05-17T14:05:13Z date_updated: 2023-07-28T13:23:19Z department: - _id: DEP5000 - _id: DEP5014 doi: 10.1109/SAHCNW.2009.5172916 keyword: - Cognitive radio - Quality of service - Space technology - Frequency - Production facilities - Chromium - Manufacturing automation - Intelligent systems - Polarization - Testing language: - iso: eng place: Piscataway, NJ publication: ' 2009 6th IEEE Annual Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks Workshops' publication_identifier: isbn: - 978-1-4244-3938-6 publication_status: published publisher: 'IEEE ' status: public title: A Generic Cognitive Radio for Evaluating Coexistence Optimized Industrial Automation Systems type: conference_editor_article user_id: '83781' year: '2009' ... --- _id: '1371' author: - first_name: Bianca full_name: Büter, Bianca id: '43960' last_name: Büter citation: ama: 'Büter B. Zerbochen (AT). Lemgo: Hochschule Ostwestfalen-Lippe; 2009.' apa: 'Büter, B. (2009). Zerbochen (AT). Lemgo: Hochschule Ostwestfalen-Lippe.' bjps: 'Büter B (2009) Zerbochen (AT). Lemgo: Hochschule Ostwestfalen-Lippe.' chicago: 'Büter, Bianca. Zerbochen (AT). Lemgo: Hochschule Ostwestfalen-Lippe, 2009.' chicago-de: 'Büter, Bianca. 2009. Zerbochen (AT). Lemgo: Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Büter, Bianca: Zerbochen (AT). Lemgo : Hochschule Ostwestfalen-Lippe, 2009' havard: B. Büter, Zerbochen (AT), Hochschule Ostwestfalen-Lippe, Lemgo, 2009. ieee: 'B. Büter, Zerbochen (AT). Lemgo: Hochschule Ostwestfalen-Lippe, 2009.' mla: Büter, Bianca. Zerbochen (AT). Hochschule Ostwestfalen-Lippe, 2009. short: B. Büter, Zerbochen (AT), Hochschule Ostwestfalen-Lippe, Lemgo, 2009. ufg: 'Büter, Bianca (2009): Zerbochen (AT), Lemgo.' van: 'Büter B. Zerbochen (AT). Lemgo: Hochschule Ostwestfalen-Lippe; 2009. 154 p.' date_created: 2019-06-07T07:50:50Z date_updated: 2023-03-15T13:49:35Z ddc: - '791' department: - _id: DEP2001 file: - access_level: closed content_type: application/pdf creator: 6bl-f5s date_created: 2019-06-07T07:49:56Z date_updated: 2019-06-07T07:49:56Z file_id: '1372' file_name: Doku_BA_Bianca_Bueter.pdf file_size: 7180663 relation: main_file title: 'Zerbochen ' file_date_updated: 2019-06-07T07:49:56Z has_accepted_license: '1' keyword: - Filmproduktion - Producer - film production - producer language: - iso: ger page: '154' place: Lemgo publication_status: published publisher: Hochschule Ostwestfalen-Lippe status: public supervisor: - first_name: Kathrin full_name: Lemme, Kathrin id: '29189' last_name: Lemme title: Zerbochen (AT) type: bachelor_thesis user_id: '45673' year: 2009 ... --- _id: '2068' abstract: - lang: eng text: The production of printing goods is laborious. Furthermore, the print quality, especially in banknotes, must be assured. It is accepted, that print defects are generated because printing parameters, also machine parameters can change unnoticed. Therefore, a combined concept for a multi-sensory learning and classification model based on new adaptive fuzzy-pattern-classifiers for data inspection is proposed. This inspection concept, which combines optical, acoustical and other machine information, comes up with a large amount of data, which leads to multivariate methods for data analysis. Multivariate methods are useful for analysis of large and complex data sets that consist of many variables measured on large numbers of physical data. author: - first_name: Walter full_name: Dyck, Walter last_name: Dyck - first_name: Thomas full_name: Türke, Thomas last_name: Türke - first_name: Johannes full_name: Schaede, Johannes id: '2128' last_name: Schaede - first_name: Volker full_name: Lohweg, Volker id: '1804' last_name: Lohweg orcid: 0000-0002-3325-7887 citation: ama: 'Dyck W, Türke T, Schaede J, Lohweg V. A Fuzzy-Pattern-Classifier-Based Adaptive Learning Model for Sensor Fusion. In: Thessaloniki, Greece: MLSP 2007 - International Workshop on MACHINE LEARNING FOR SIGNAL PROCESSING; 2007:accepted for publication. doi:10.1109/MLSP.2007.4414320' apa: 'Dyck, W., Türke, T., Schaede, J., & Lohweg, V. (2007). A Fuzzy-Pattern-Classifier-Based Adaptive Learning Model for Sensor Fusion (p. accepted for publication). Thessaloniki, Greece: MLSP 2007 - International Workshop on MACHINE LEARNING FOR SIGNAL PROCESSING. https://doi.org/10.1109/MLSP.2007.4414320' bjps: 'Dyck W et al. (2007) A Fuzzy-Pattern-Classifier-Based Adaptive Learning Model for Sensor Fusion. Thessaloniki, Greece: MLSP 2007 - International Workshop on MACHINE LEARNING FOR SIGNAL PROCESSING, p. accepted for publication.' chicago: 'Dyck, Walter, Thomas Türke, Johannes Schaede, and Volker Lohweg. “A Fuzzy-Pattern-Classifier-Based Adaptive Learning Model for Sensor Fusion,” accepted for publication. Thessaloniki, Greece: MLSP 2007 - International Workshop on MACHINE LEARNING FOR SIGNAL PROCESSING, 2007. https://doi.org/10.1109/MLSP.2007.4414320.' chicago-de: 'Dyck, Walter, Thomas Türke, Johannes Schaede und Volker Lohweg. 2007. A Fuzzy-Pattern-Classifier-Based Adaptive Learning Model for Sensor Fusion. In: , accepted for publication. Thessaloniki, Greece: MLSP 2007 - International Workshop on MACHINE LEARNING FOR SIGNAL PROCESSING. doi:10.1109/MLSP.2007.4414320, .' din1505-2-1: 'Dyck, Walter ; Türke, Thomas ; Schaede, Johannes ; Lohweg, Volker: A Fuzzy-Pattern-Classifier-Based Adaptive Learning Model for Sensor Fusion. In: . Thessaloniki, Greece : MLSP 2007 - International Workshop on MACHINE LEARNING FOR SIGNAL PROCESSING, 2007, S. accepted for publication' havard: 'W. Dyck, T. Türke, J. Schaede, V. Lohweg, A Fuzzy-Pattern-Classifier-Based Adaptive Learning Model for Sensor Fusion, in: MLSP 2007 - International Workshop on MACHINE LEARNING FOR SIGNAL PROCESSING, Thessaloniki, Greece, 2007: p. accepted for publication.' ieee: W. Dyck, T. Türke, J. Schaede, and V. Lohweg, “A Fuzzy-Pattern-Classifier-Based Adaptive Learning Model for Sensor Fusion,” 2007, p. accepted for publication. mla: Dyck, Walter, et al. A Fuzzy-Pattern-Classifier-Based Adaptive Learning Model for Sensor Fusion. MLSP 2007 - International Workshop on MACHINE LEARNING FOR SIGNAL PROCESSING, 2007, p. accepted for publication, doi:10.1109/MLSP.2007.4414320. short: 'W. Dyck, T. Türke, J. Schaede, V. Lohweg, in: MLSP 2007 - International Workshop on MACHINE LEARNING FOR SIGNAL PROCESSING, Thessaloniki, Greece, 2007, p. accepted for publication.' ufg: 'Dyck, Walter et. al. (2007): A Fuzzy-Pattern-Classifier-Based Adaptive Learning Model for Sensor Fusion, in: , Thessaloniki, Greece, S. accepted for publication.' van: 'Dyck W, Türke T, Schaede J, Lohweg V. A Fuzzy-Pattern-Classifier-Based Adaptive Learning Model for Sensor Fusion. In Thessaloniki, Greece: MLSP 2007 - International Workshop on MACHINE LEARNING FOR SIGNAL PROCESSING; 2007. p. accepted for publication.' date_created: 2019-11-29T13:50:28Z date_updated: 2023-03-15T13:49:38Z department: - _id: DEP5023 doi: 10.1109/MLSP.2007.4414320 keyword: - Sensor fusion - Inspection - Optical sensors - Printing machinery - Data security - Data analysis - Production - Degradation - Principal component analysis - Karhunen-Loeve transforms language: - iso: eng main_file_link: - url: https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=4414320&tag=1 page: accepted for publication place: Thessaloniki, Greece publication_identifier: eisbn: - 978-1-4244-1566-3 isbn: - 978-1-4244-1565-6 issn: - '1551-2541 ' unknown: - '2378-928X ' publication_status: published publisher: MLSP 2007 - International Workshop on MACHINE LEARNING FOR SIGNAL PROCESSING status: public title: A Fuzzy-Pattern-Classifier-Based Adaptive Learning Model for Sensor Fusion type: conference user_id: '45673' year: 2007 ... --- _id: '486' abstract: - lang: eng text: Growing market demands on enterprises and the resulting challenges for their organization have been discussed for many years now. The flexibilty and mutability of an enterprise are thereby considered as a significant factor for success. author: - first_name: Gert full_name: Zülch, Gert last_name: Zülch - first_name: Thilo Gerhard full_name: Gamber, Thilo Gerhard id: '71451' last_name: Gamber - first_name: Patricia full_name: Stock, Patricia last_name: Stock citation: ama: 'Zülch G, Gamber TG, Stock P. Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area. In: Olhager J, Persson F, eds. Advances in Production Management Systems. New York: Springer; 2007:337-344.' apa: 'Zülch, G., Gamber, T. G., & Stock, P. (2007). Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area. In J. Olhager & F. Persson (Eds.), Advances in Production Management Systems (pp. 337–344). New York: Springer.' bjps: 'Zülch G, Gamber TG and Stock P (2007) Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area. In Olhager J and Persson F (eds), Advances in Production Management Systems. New York: Springer, pp. 337–344.' chicago: 'Zülch, Gert, Thilo Gerhard Gamber, and Patricia Stock. “Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area.” In Advances in Production Management Systems, edited by Jan Olhager and Fredrik Persson, 337–44. New York: Springer, 2007.' chicago-de: 'Zülch, Gert, Thilo Gerhard Gamber und Patricia Stock. 2007. Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area. In: Advances in Production Management Systems, hg. von Jan Olhager und Fredrik Persson, 337–344. New York: Springer.' din1505-2-1: 'Zülch, Gert ; Gamber, Thilo Gerhard ; Stock, Patricia: Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area. In: Olhager, J. ; Persson, F. (Hrsg.): Advances in Production Management Systems. New York : Springer, 2007, S. 337–344' havard: 'G. Zülch, T.G. Gamber, P. Stock, Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area, in: J. Olhager, F. Persson (Eds.), Advances in Production Management Systems, Springer, New York, 2007: pp. 337–344.' ieee: G. Zülch, T. G. Gamber, and P. Stock, “Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area,” in Advances in Production Management Systems, Linköping, 2007, pp. 337–344. mla: Zülch, Gert, et al. “Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area.” Advances in Production Management Systems, edited by Jan Olhager and Fredrik Persson, Springer, 2007, pp. 337–44. short: 'G. Zülch, T.G. Gamber, P. Stock, in: J. Olhager, F. Persson (Eds.), Advances in Production Management Systems, Springer, New York, 2007, pp. 337–344.' ufg: 'Zülch, Gert et. al. (2007): Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area, in: Jan Olhager/Fredrik Persson (Hgg.): Advances in Production Management Systems, New York, S. 337–344.' van: 'Zülch G, Gamber TG, Stock P. Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area. In: Olhager J, Persson F, editors. Advances in Production Management Systems. New York: Springer; 2007. p. 337–44.' conference: end_date: 2007-09-19 location: Linköping name: International IFIP TC 5, WG 5.7 Conference on Advances in Production Management Systems (APMS 2007) start_date: 2007-09-17 date_created: 2019-01-30T07:51:48Z date_updated: 2023-03-15T13:49:56Z editor: - first_name: Jan full_name: Olhager, Jan last_name: Olhager - first_name: Fredrik full_name: Persson, Fredrik last_name: Persson extern: '1' keyword: - production planning and control - decision-making system - personnel-oriented simulation language: - iso: eng page: 337-344 place: New York publication: Advances in Production Management Systems publication_identifier: isbn: - 978-0-387-74157-4 publication_status: published publisher: Springer status: public title: Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area type: conference user_id: '74004' year: 2007 ... --- _id: '2340' article_type: original author: - first_name: Björn full_name: Frahm, Björn id: '45666' last_name: Frahm - first_name: H.-C. full_name: Blank, H.-C. last_name: Blank - first_name: P. full_name: Cornand, P. last_name: Cornand - first_name: W. full_name: Oelßner, W. last_name: Oelßner - first_name: U. full_name: Guth, U. last_name: Guth - first_name: P. full_name: Lane, P. last_name: Lane - first_name: A. full_name: Munack, A. last_name: Munack - first_name: K. full_name: Johannsen, K. last_name: Johannsen - first_name: R. full_name: Pörtner, R. last_name: Pörtner citation: ama: Frahm B, Blank H-C, Cornand P, et al. Determination of dissolved CO2 concentration and CO2 production rate of mammalian cell suspension culture based on off-gas measurement. Journal of Biotechnology. 2002;99(2):133-148. doi:https://doi.org/10.1016/S0168-1656(02)00180-3 apa: Frahm, B., Blank, H.-C., Cornand, P., Oelßner, W., Guth, U., Lane, P., … Pörtner, R. (2002). Determination of dissolved CO2 concentration and CO2 production rate of mammalian cell suspension culture based on off-gas measurement. Journal of Biotechnology, 99(2), 133–148. https://doi.org/10.1016/S0168-1656(02)00180-3 bjps: Frahm B et al. (2002) Determination of Dissolved CO2 Concentration and CO2 Production Rate of Mammalian Cell Suspension Culture Based on Off-Gas Measurement. Journal of Biotechnology 99, 133–148. chicago: 'Frahm, Björn, H.-C. Blank, P. Cornand, W. Oelßner, U. Guth, P. Lane, A. Munack, K. Johannsen, and R. Pörtner. “Determination of Dissolved CO2 Concentration and CO2 Production Rate of Mammalian Cell Suspension Culture Based on Off-Gas Measurement.” Journal of Biotechnology 99, no. 2 (2002): 133–48. https://doi.org/10.1016/S0168-1656(02)00180-3.' chicago-de: 'Frahm, Björn, H.-C. Blank, P. Cornand, W. Oelßner, U. Guth, P. Lane, A. Munack, K. Johannsen und R. Pörtner. 2002. Determination of dissolved CO2 concentration and CO2 production rate of mammalian cell suspension culture based on off-gas measurement. Journal of Biotechnology 99, Nr. 2: 133–148. doi:https://doi.org/10.1016/S0168-1656(02)00180-3, .' din1505-2-1: 'Frahm, Björn ; Blank, H.-C. ; Cornand, P. ; Oelßner, W. ; Guth, U. ; Lane, P. ; Munack, A. ; Johannsen, K. ; u. a.: Determination of dissolved CO2 concentration and CO2 production rate of mammalian cell suspension culture based on off-gas measurement. In: Journal of Biotechnology Bd. 99, Elsevier (2002), Nr. 2, S. 133–148' havard: B. Frahm, H.-C. Blank, P. Cornand, W. Oelßner, U. Guth, P. Lane, A. Munack, K. Johannsen, R. Pörtner, Determination of dissolved CO2 concentration and CO2 production rate of mammalian cell suspension culture based on off-gas measurement, Journal of Biotechnology. 99 (2002) 133–148. ieee: B. Frahm et al., “Determination of dissolved CO2 concentration and CO2 production rate of mammalian cell suspension culture based on off-gas measurement,” Journal of Biotechnology, vol. 99, no. 2, pp. 133–148, 2002. mla: Frahm, Björn, et al. “Determination of Dissolved CO2 Concentration and CO2 Production Rate of Mammalian Cell Suspension Culture Based on Off-Gas Measurement.” Journal of Biotechnology, vol. 99, no. 2, Elsevier, 2002, pp. 133–48, doi:https://doi.org/10.1016/S0168-1656(02)00180-3. short: B. Frahm, H.-C. Blank, P. Cornand, W. Oelßner, U. Guth, P. Lane, A. Munack, K. Johannsen, R. Pörtner, Journal of Biotechnology 99 (2002) 133–148. ufg: 'Frahm, Björn et. al. (2002): Determination of dissolved CO2 concentration and CO2 production rate of mammalian cell suspension culture based on off-gas measurement, in: Journal of Biotechnology 99 (2), S. 133–148.' van: Frahm B, Blank H-C, Cornand P, Oelßner W, Guth U, Lane P, et al. Determination of dissolved CO2 concentration and CO2 production rate of mammalian cell suspension culture based on off-gas measurement. Journal of Biotechnology. 2002;99(2):133–48. date_created: 2020-05-15T08:49:12Z date_updated: 2023-03-15T13:49:39Z department: - _id: DEP4021 doi: https://doi.org/10.1016/S0168-1656(02)00180-3 extern: '1' intvolume: ' 99' issue: '2' keyword: - Dissolved carbon dioxide - Carbon dioxide production rate - Carbon dioxide transfer rate - Off-gas measurement - Mammalian cell suspension culture language: - iso: eng main_file_link: - open_access: '1' url: https://www.sciencedirect.com/science/article/pii/S0168165602001803 oa: '1' page: 133-148 publication: Journal of Biotechnology publication_identifier: eissn: - '1873-4863 ' issn: - 0168-1656; 1389-0352 publisher: Elsevier quality_controlled: '1' status: public title: Determination of dissolved CO2 concentration and CO2 production rate of mammalian cell suspension culture based on off-gas measurement type: scientific_journal_article user_id: '45666' volume: 99 year: 2002 ...