---
_id: '13440'
abstract:
- lang: ger
text: "Die vorliegende Arbeit untersucht die Eignung von digitalen 3D Facial Rigging
Systemen, für den Einsatz eines hybriden Stop-Motion Workflows. In diesem Workflow
werden digitale Gesichtsanimationen mit Stop-Motion animierten Körperbewegungen
verbunden. Ziel dieser Arbeit ist es die beiden Systeme, das Joint-Based und das
Blendshape-Based System, systematisch miteinander zu vergleichen.\r\nDie Untersuchung
besteht aus einer Kombination zwischen theoretischer Analyse von bestehenden Workflows
innerhalb des Stop-Motion und CGI Mediums und einer praktischen Umsetzung beider
Rigging Systeme.\r\nDie Bewertung der angewendeten Tests basiert auf einer eigenen
Bewertungsmatrix die aus Kriterien wie der Ausdrucksstärke, Deformationsqualität,
Setup-Aufwand, Bedienbarkeit und Integration in den hybriden Workflow besteht.\r\nAls
funktionale Referenz der Facial Rigging Systeme wird das Facial Action Coding
System verwendet.\r\nDas besser abschneidende System wird in einem Fallbeispiel,
dem Stop-Motion Kurzfilm ENOUGH, eingesetzt, um die finale Gesichtsanimationen
einer Szene zu erstellen. Der Film hat durch seine dialoglose Erzählform eine
hohe Anforderung an die Ausdrucksstärke der Mimik.\r\nDie Ergebnisse der Untersuchungen
zeigen, dass beide Systeme grundlegend für die Nutzung innerhalb eines hybriden
Stop-Motion Workflows geeignet sind. Das Joint-Based System erwies sich jedoch
aufgrund einer höheren Flexibilität und der Möglichkeit subtiler Veränderungen,
als vorteilhafter geeignet für die Anwendung innerhalb des Fallbeispiels. Die
Arbeit verdeutlicht anhand der gewonnenen Ergebnisse, das Potenzial digitaler
Facial Rigging Systeme als eigenständige Methode für finale Gesichtsanimationen
innerhalb hybrider Stop-Motion Produktionen."
author:
- first_name: Jessica
full_name: Benske, Jessica
id: '80263'
last_name: Benske
citation:
ama: 'Benske J. 3D Facial Rigging im hybriden Stop-Motion Film ENOUGH: Ein Vergleich
von Joint- und Blendshape-Systemen. Technische Hochschule Ostwestfalen-Lippe;
2026.'
apa: 'Benske, J. (2026). 3D Facial Rigging im hybriden Stop-Motion Film ENOUGH:
Ein Vergleich von Joint- und Blendshape-Systemen. Technische Hochschule Ostwestfalen-Lippe.'
bjps: 'Benske J (2026) 3D Facial Rigging im hybriden Stop-Motion Film
ENOUGH: Ein Vergleich von Joint- und Blendshape-Systemen. Detmold: Technische
Hochschule Ostwestfalen-Lippe.'
chicago: 'Benske, Jessica. 3D Facial Rigging im hybriden Stop-Motion Film ENOUGH:
Ein Vergleich von Joint- und Blendshape-Systemen. Detmold: Technische Hochschule
Ostwestfalen-Lippe, 2026.'
chicago-de: 'Benske, Jessica. 2026. 3D Facial Rigging im hybriden Stop-Motion
Film ENOUGH: Ein Vergleich von Joint- und Blendshape-Systemen. Detmold: Technische
Hochschule Ostwestfalen-Lippe.'
din1505-2-1: 'Benske, Jessica: 3D
Facial Rigging im hybriden Stop-Motion Film ENOUGH: Ein Vergleich von Joint- und
Blendshape-Systemen. Detmold : Technische Hochschule Ostwestfalen-Lippe, 2026'
havard: 'J. Benske, 3D Facial Rigging im hybriden Stop-Motion Film ENOUGH: Ein Vergleich
von Joint- und Blendshape-Systemen, Technische Hochschule Ostwestfalen-Lippe,
Detmold, 2026.'
ieee: 'J. Benske, 3D Facial Rigging im hybriden Stop-Motion Film ENOUGH: Ein
Vergleich von Joint- und Blendshape-Systemen. Detmold: Technische Hochschule
Ostwestfalen-Lippe, 2026.'
mla: 'Benske, Jessica. 3D Facial Rigging im hybriden Stop-Motion Film ENOUGH:
Ein Vergleich von Joint- und Blendshape-Systemen. Technische Hochschule Ostwestfalen-Lippe,
2026.'
short: 'J. Benske, 3D Facial Rigging im hybriden Stop-Motion Film ENOUGH: Ein Vergleich
von Joint- und Blendshape-Systemen, Technische Hochschule Ostwestfalen-Lippe,
Detmold, 2026.'
ufg: 'Benske, Jessica: 3D Facial Rigging im hybriden Stop-Motion Film ENOUGH:
Ein Vergleich von Joint- und Blendshape-Systemen, Detmold 2026.'
van: 'Benske J. 3D Facial Rigging im hybriden Stop-Motion Film ENOUGH: Ein Vergleich
von Joint- und Blendshape-Systemen. Detmold: Technische Hochschule Ostwestfalen-Lippe;
2026. 68 p.'
date_created: 2026-02-25T12:35:50Z
date_updated: 2026-03-04T13:09:56Z
ddc:
- '770'
department:
- _id: DEP2001
file:
- access_level: open_access
content_type: application/pdf
creator: bc5-xna
date_created: 2026-02-25T12:16:19Z
date_updated: 2026-02-25T12:16:19Z
file_id: '13441'
file_name: 3D Facial Rigging im hybriden Stop-Motion Film ENOUGH - Ein Vergleich
von Joint- und Blendshape-Systemen.pdf
file_size: 2670848
relation: main_file
file_date_updated: 2026-02-25T12:16:19Z
has_accepted_license: '1'
keyword:
- Animation
- Stop-Motion
- CGI
- Rigging
language:
- iso: ger
oa: '1'
page: '68'
place: Detmold
publication_status: published
publisher: Technische Hochschule Ostwestfalen-Lippe
status: public
supervisor:
- first_name: Denis
full_name: Behnke, Denis
id: '88196'
last_name: Behnke
- first_name: Alexander
full_name: Kutter, Alexander
id: '83513'
last_name: Kutter
title: '3D Facial Rigging im hybriden Stop-Motion Film ENOUGH: Ein Vergleich von Joint-
und Blendshape-Systemen'
type: bachelor_thesis
user_id: '83781'
year: '2026'
...
---
_id: '13022'
abstract:
- lang: eng
text: Numerous single-track railway lines are currently disused due to economic
factors. These lines could potentially be reactivated by small vehicles that utilise
only a single rail, enabling bidirectional operation simultaneously. The MONOCAB
is such a compact monorail vehicle, stabilised by a system of control moment gyroscopes
(CMGs) and a laterally movable, controllable trim mass. Despite their potential,
there is currently a lack of comparative references for MONOCABs in relation to
other vehicles. In the context of mechanical design and construction, interdependencies
with roll stabilisation occur. Of particular concern are torsional effects, which
can significantly impact stability. This study investigates the structural dynamics
of monorail vehicles with a focus on the influence of gyroscopes. Gyroscopic systems
play a significant role in the behaviour of such vehicles, affecting stability,
control and response to external disturbances. Through a comprehensive approach
encompassing analytical modelling, numerical simulations, and experimental validation,
the interactions between the vehicle's structure and gyroscopic components are
explored. The analytical considerations are validated via experimentally derived
frequency responses utilising a full-scale monorail vehicle. The results of this
study have implications for various fields, such as transportation, robotics and
aerospace engineering.
author:
- first_name: Martin
full_name: Griese, Martin
id: '52308'
last_name: Griese
- first_name: Thomas
full_name: Schulte, Thomas
id: '46242'
last_name: Schulte
citation:
ama: 'Griese M, Schulte T. Gyroscopic effects in the structural dynamics of monorail
vehicles. Vehicle system dynamics : international journal of vehicle mechanics
and mobility. 2025;63. doi:10.1080/00423114.2025.2480820'
apa: 'Griese, M., & Schulte, T. (2025). Gyroscopic effects in the structural
dynamics of monorail vehicles. Vehicle System Dynamics : International Journal
of Vehicle Mechanics and Mobility, 63. https://doi.org/10.1080/00423114.2025.2480820'
bjps: 'Griese M and Schulte T (2025) Gyroscopic Effects in the Structural
Dynamics of Monorail Vehicles. Vehicle system dynamics : international journal
of vehicle mechanics and mobility 63.'
chicago: 'Griese, Martin, and Thomas Schulte. “Gyroscopic Effects in the Structural
Dynamics of Monorail Vehicles.” Vehicle System Dynamics : International Journal
of Vehicle Mechanics and Mobility 63 (2025). https://doi.org/10.1080/00423114.2025.2480820.'
chicago-de: 'Griese, Martin und Thomas Schulte. 2025. Gyroscopic effects in the
structural dynamics of monorail vehicles. Vehicle system dynamics : international
journal of vehicle mechanics and mobility 63. doi:10.1080/00423114.2025.2480820,
.'
din1505-2-1: 'Griese, Martin ; Schulte, Thomas: Gyroscopic effects in
the structural dynamics of monorail vehicles. In: Vehicle system dynamics :
international journal of vehicle mechanics and mobility Bd. 63. London [u.a.],
Taylor & Francis (2025)'
havard: 'M. Griese, T. Schulte, Gyroscopic effects in the structural dynamics of
monorail vehicles, Vehicle System Dynamics : International Journal of Vehicle
Mechanics and Mobility. 63 (2025).'
ieee: 'M. Griese and T. Schulte, “Gyroscopic effects in the structural dynamics
of monorail vehicles,” Vehicle system dynamics : international journal of vehicle
mechanics and mobility, vol. 63, 2025, doi: 10.1080/00423114.2025.2480820.'
mla: 'Griese, Martin, and Thomas Schulte. “Gyroscopic Effects in the Structural
Dynamics of Monorail Vehicles.” Vehicle System Dynamics : International Journal
of Vehicle Mechanics and Mobility, vol. 63, 2025, https://doi.org/10.1080/00423114.2025.2480820.'
short: 'M. Griese, T. Schulte, Vehicle System Dynamics : International Journal of
Vehicle Mechanics and Mobility 63 (2025).'
ufg: 'Griese, Martin/Schulte, Thomas: Gyroscopic effects in the structural
dynamics of monorail vehicles, in: Vehicle system dynamics : international
journal of vehicle mechanics and mobility 63 (2025).'
van: 'Griese M, Schulte T. Gyroscopic effects in the structural dynamics of monorail
vehicles. Vehicle system dynamics : international journal of vehicle mechanics
and mobility. 2025;63.'
date_created: 2025-06-25T07:50:04Z
date_updated: 2025-06-25T08:14:58Z
department:
- _id: DEP6020
- _id: DEP5022
doi: 10.1080/00423114.2025.2480820
external_id:
isi:
- '001467951500001'
intvolume: ' 63'
isi: '1'
keyword:
- Vehicle dynamics
- rail vehicle
- control moment gyroscope
- stabilisation control
- motion control
- stability analysis
language:
- iso: eng
place: London [u.a.]
publication: 'Vehicle system dynamics : international journal of vehicle mechanics
and mobility'
publication_identifier:
eissn:
- 1744-5159
issn:
- 0042-3114
publication_status: published
publisher: Taylor & Francis
quality_controlled: '1'
status: public
title: Gyroscopic effects in the structural dynamics of monorail vehicles
type: scientific_journal_article
user_id: '83781'
volume: 63
year: '2025'
...
---
_id: '13124'
abstract:
- lang: ger
text: Der Film basiert auf Interviews mit zwei jungen Frauen mit Migrationshintergrund,
die über ihre Erfahrungen in ihren Mittzwanzigern sprechen. Diese realen Stimmen
bilden die Grundlage für die narrative und visuelle Umsetzung. Dabei wird untersucht,
wie die Quarterlife Crisis speziell in dieser Gruppe wahrgenommen und erlebt wird,
welche Rolle kulturelle und familiäre Erwartungen spielen und welche Strategien
zur Bewältigung gefunden werden.
author:
- first_name: Romana
full_name: Hussain, Romana
id: '84794'
last_name: Hussain
citation:
ama: Hussain R. Tanz – ein Film über die Quarterlife Crisis und Herausforderungen
der Identitätssuche von Frauen mit Migrationshintergrund. Technische Hochschule
Ostwestfalen-Lippe; 2025.
apa: Hussain, R. (2025). Tanz – ein Film über die Quarterlife Crisis und Herausforderungen
der Identitätssuche von Frauen mit Migrationshintergrund. Technische Hochschule
Ostwestfalen-Lippe.
bjps: 'Hussain R (2025) Tanz – ein Film über die Quarterlife Crisis und
Herausforderungen der Identitätssuche von Frauen mit Migrationshintergrund.
Detmold: Technische Hochschule Ostwestfalen-Lippe.'
chicago: 'Hussain, Romana. Tanz – ein Film über die Quarterlife Crisis und Herausforderungen
der Identitätssuche von Frauen mit Migrationshintergrund. Detmold: Technische
Hochschule Ostwestfalen-Lippe, 2025.'
chicago-de: 'Hussain, Romana. 2025. Tanz – ein Film über die Quarterlife Crisis
und Herausforderungen der Identitätssuche von Frauen mit Migrationshintergrund.
Detmold: Technische Hochschule Ostwestfalen-Lippe.'
din1505-2-1: 'Hussain, Romana: Tanz
– ein Film über die Quarterlife Crisis und Herausforderungen der Identitätssuche
von Frauen mit Migrationshintergrund. Detmold : Technische Hochschule Ostwestfalen-Lippe,
2025'
havard: R. Hussain, Tanz – ein Film über die Quarterlife Crisis und Herausforderungen
der Identitätssuche von Frauen mit Migrationshintergrund, Technische Hochschule
Ostwestfalen-Lippe, Detmold, 2025.
ieee: 'R. Hussain, Tanz – ein Film über die Quarterlife Crisis und Herausforderungen
der Identitätssuche von Frauen mit Migrationshintergrund. Detmold: Technische
Hochschule Ostwestfalen-Lippe, 2025.'
mla: Hussain, Romana. Tanz – ein Film über die Quarterlife Crisis und Herausforderungen
der Identitätssuche von Frauen mit Migrationshintergrund. Technische Hochschule
Ostwestfalen-Lippe, 2025.
short: R. Hussain, Tanz – ein Film über die Quarterlife Crisis und Herausforderungen
der Identitätssuche von Frauen mit Migrationshintergrund, Technische Hochschule
Ostwestfalen-Lippe, Detmold, 2025.
ufg: 'Hussain, Romana: Tanz – ein Film über die Quarterlife Crisis und Herausforderungen
der Identitätssuche von Frauen mit Migrationshintergrund, Detmold 2025.'
van: 'Hussain R. Tanz – ein Film über die Quarterlife Crisis und Herausforderungen
der Identitätssuche von Frauen mit Migrationshintergrund. Detmold: Technische
Hochschule Ostwestfalen-Lippe; 2025. 103 p.'
date_created: 2025-08-13T18:45:25Z
date_updated: 2025-10-10T13:07:48Z
ddc:
- '700'
department:
- _id: DEP2001
file:
- access_level: request
content_type: application/pdf
creator: cz2-3xx
date_created: 2025-08-13T19:11:31Z
date_updated: 2025-08-13T19:11:31Z
file_id: '13126'
file_name: MA_Hussain_Tanz.pdf
file_size: 14834348
relation: main_file
file_date_updated: 2025-08-13T19:11:31Z
has_accepted_license: '1'
keyword:
- Animation
- Mixed Media
- Claymation
- Stop-Motion
- Illustration
- After Effects
- Quarterlife Crisis
- Migrationshintergrund
language:
- iso: ger
page: '103'
place: Detmold
publication_status: published
publisher: Technische Hochschule Ostwestfalen-Lippe
status: public
supervisor:
- first_name: Peter
full_name: Kaboth, Peter
id: '11179'
last_name: Kaboth
- first_name: Gabi
full_name: Schwab-Trapp, Gabi
last_name: Schwab-Trapp
title: Tanz – ein Film über die Quarterlife Crisis und Herausforderungen der Identitätssuche
von Frauen mit Migrationshintergrund
type: master_thesis
user_id: '83781'
year: '2025'
...
---
_id: '8023'
abstract:
- lang: eng
text: 'The effect of jet Reynolds number, jet exit angle, the nozzle to surface
distance, jet to jet spacing on the heat transfer, and pressure force performance
from multiple impinging round jets on a moving curved surface have been numerically
evaluated. Two correlations are developed and validated for the average Nu number
and the pressure force coefficient and the agreement between the CFD and correlations
was reasonable. The surface motion effect becomes more pronounced on the Nu number
distribution for low jet Re number, high jet to jet spacing, large jet to surface
distance, and angled jets. The pressure force coefficient is highly dependent
on the jet to surface distance and jet angle but relatively insensitive to jet
Re number and jet to jet spacing. '
article_number: '16'
author:
- first_name: Ali
full_name: Chitsazan, Ali
id: '66488'
last_name: Chitsazan
- first_name: Georg Heinrich
full_name: Klepp, Georg Heinrich
id: '49011'
last_name: Klepp
- first_name: Birgit
full_name: Glasmacher, Birgit
last_name: Glasmacher
citation:
ama: 'Chitsazan A, Klepp GH, Glasmacher B. CORRELATION DEVELOPMENT FOR JET IMPINGEMENT
HEAT TRANSFER AND FORCE ON A MOVING CURVED SURFACE. Frontiers in heat and mass
transfer : FHMT ; an international journal . 2022;18(1). doi:10.5098/hmt.18.16'
apa: 'Chitsazan, A., Klepp, G. H., & Glasmacher, B. (2022). CORRELATION DEVELOPMENT
FOR JET IMPINGEMENT HEAT TRANSFER AND FORCE ON A MOVING CURVED SURFACE. Frontiers
in Heat and Mass Transfer : FHMT ; an International Journal , 18(1),
Article 16. https://doi.org/10.5098/hmt.18.16'
bjps: 'Chitsazan A, Klepp GH and Glasmacher B (2022) CORRELATION DEVELOPMENT
FOR JET IMPINGEMENT HEAT TRANSFER AND FORCE ON A MOVING CURVED SURFACE. Frontiers
in heat and mass transfer : FHMT ; an international journal 18.'
chicago: 'Chitsazan, Ali, Georg Heinrich Klepp, and Birgit Glasmacher. “CORRELATION
DEVELOPMENT FOR JET IMPINGEMENT HEAT TRANSFER AND FORCE ON A MOVING CURVED SURFACE.”
Frontiers in Heat and Mass Transfer : FHMT ; an International Journal
18, no. 1 (2022). https://doi.org/10.5098/hmt.18.16.'
chicago-de: 'Chitsazan, Ali, Georg Heinrich Klepp und Birgit Glasmacher. 2022. CORRELATION
DEVELOPMENT FOR JET IMPINGEMENT HEAT TRANSFER AND FORCE ON A MOVING CURVED SURFACE.
Frontiers in heat and mass transfer : FHMT ; an international journal
18, Nr. 1. doi:10.5098/hmt.18.16,
.'
din1505-2-1: 'Chitsazan, Ali ; Klepp, Georg Heinrich ; Glasmacher,
Birgit: CORRELATION DEVELOPMENT FOR JET IMPINGEMENT HEAT TRANSFER AND FORCE
ON A MOVING CURVED SURFACE. In: Frontiers in heat and mass transfer : FHMT ;
an international journal Bd. 18. Columbia, Mo, Global Digital Centra (2022),
Nr. 1'
havard: 'A. Chitsazan, G.H. Klepp, B. Glasmacher, CORRELATION DEVELOPMENT FOR JET
IMPINGEMENT HEAT TRANSFER AND FORCE ON A MOVING CURVED SURFACE, Frontiers in Heat
and Mass Transfer : FHMT ; an International Journal . 18 (2022).'
ieee: 'A. Chitsazan, G. H. Klepp, and B. Glasmacher, “CORRELATION DEVELOPMENT FOR
JET IMPINGEMENT HEAT TRANSFER AND FORCE ON A MOVING CURVED SURFACE,” Frontiers
in heat and mass transfer : FHMT ; an international journal , vol. 18, no.
1, Art. no. 16, 2022, doi: 10.5098/hmt.18.16.'
mla: 'Chitsazan, Ali, et al. “CORRELATION DEVELOPMENT FOR JET IMPINGEMENT HEAT TRANSFER
AND FORCE ON A MOVING CURVED SURFACE.” Frontiers in Heat and Mass Transfer :
FHMT ; an International Journal , vol. 18, no. 1, 16, 2022, https://doi.org/10.5098/hmt.18.16.'
short: 'A. Chitsazan, G.H. Klepp, B. Glasmacher, Frontiers in Heat and Mass Transfer :
FHMT ; an International Journal 18 (2022).'
ufg: 'Chitsazan, Ali/Klepp, Georg Heinrich/Glasmacher, Birgit: CORRELATION
DEVELOPMENT FOR JET IMPINGEMENT HEAT TRANSFER AND FORCE ON A MOVING CURVED SURFACE,
in: Frontiers in heat and mass transfer : FHMT ; an international journal
18 (2022), H. 1.'
van: 'Chitsazan A, Klepp GH, Glasmacher B. CORRELATION DEVELOPMENT FOR JET IMPINGEMENT
HEAT TRANSFER AND FORCE ON A MOVING CURVED SURFACE. Frontiers in heat and mass
transfer : FHMT ; an international journal . 2022;18(1).'
date_created: 2022-05-08T13:54:24Z
date_updated: 2024-08-08T08:57:02Z
department:
- _id: DEP6017
- _id: DEP6020
doi: 10.5098/hmt.18.16
intvolume: ' 18'
issue: '1'
keyword:
- Angled jets
- Heat transfer
- Pressure force
- Surface motion
- Curvature
- Correlation
language:
- iso: eng
place: Columbia, Mo
publication: 'Frontiers in heat and mass transfer : FHMT ; an international journal '
publication_identifier:
issn:
- 2151-8629
publication_status: published
publisher: Global Digital Centra
quality_controlled: '1'
status: public
title: CORRELATION DEVELOPMENT FOR JET IMPINGEMENT HEAT TRANSFER AND FORCE ON A MOVING
CURVED SURFACE
type: scientific_journal_article
user_id: '83781'
volume: 18
year: '2022'
...
---
_id: '8026'
abstract:
- lang: eng
text: The effect of jet arrangement, jet Re number, jet exit angle (θ), the nozzle-to-surface
distance (H/d), jet-to-jet spacing (S/d) on the heat transfer, and pressure force
performance from multiple impinging round jets on a moving flat surface have been
numerically evaluated. There is a minor difference between in-line and staggered
arrangements on a moving flat surface. The averaged Nusselt number on a moving
flat surface reduces with an increase in the relative velocity (VR). The surface
motion effects become more pronounced on the local Nu distribution at low Re,
small S/d, large H/d, and angled jets for a moving flat surface. The pressure
force coefficient on a moving flat surface is highly dependent on the H/d and
θ but relatively insensitive to the VR, Re, and S/d within the range examined.
Two correlations are developed and validated for the average Nu and force coefficient
and the agreement between the CFD and correlation is found to be reasonable.
author:
- first_name: Ali
full_name: Chitsazan, Ali
id: '66488'
last_name: Chitsazan
- first_name: Georg Heinrich
full_name: Klepp, Georg Heinrich
id: '49011'
last_name: Klepp
- first_name: Birgit
full_name: Glasmacher, Birgit
last_name: Glasmacher
citation:
ama: Chitsazan A, Klepp GH, Glasmacher B. Effect of Surface Motion on Heat Transfer
and Pressure Force from Multiple Impinging Jets– A Numerical Study. International
Journal of Heat and Technology. 2022;40(1):137-144. doi:10.18280/ijht.400116
apa: Chitsazan, A., Klepp, G. H., & Glasmacher, B. (2022). Effect of Surface
Motion on Heat Transfer and Pressure Force from Multiple Impinging Jets– A Numerical
Study. International Journal of Heat and Technology, 40(1), 137–144.
https://doi.org/10.18280/ijht.400116
bjps: Chitsazan A, Klepp GH and Glasmacher B (2022) Effect of Surface Motion
on Heat Transfer and Pressure Force from Multiple Impinging Jets– A Numerical
Study. International Journal of Heat and Technology 40, 137–144.
chicago: 'Chitsazan, Ali, Georg Heinrich Klepp, and Birgit Glasmacher. “Effect of
Surface Motion on Heat Transfer and Pressure Force from Multiple Impinging Jets–
A Numerical Study.” International Journal of Heat and Technology 40, no.
1 (2022): 137–44. https://doi.org/10.18280/ijht.400116.'
chicago-de: 'Chitsazan, Ali, Georg Heinrich Klepp und Birgit Glasmacher. 2022. Effect
of Surface Motion on Heat Transfer and Pressure Force from Multiple Impinging
Jets– A Numerical Study. International Journal of Heat and Technology 40,
Nr. 1: 137–144. doi:10.18280/ijht.400116,
.'
din1505-2-1: 'Chitsazan, Ali ; Klepp, Georg Heinrich ; Glasmacher,
Birgit: Effect of Surface Motion on Heat Transfer and Pressure Force from
Multiple Impinging Jets– A Numerical Study. In: International Journal of Heat
and Technology Bd. 40. Bologna, Pitagora (2022), Nr. 1, S. 137–144'
havard: A. Chitsazan, G.H. Klepp, B. Glasmacher, Effect of Surface Motion on Heat
Transfer and Pressure Force from Multiple Impinging Jets– A Numerical Study, International
Journal of Heat and Technology. 40 (2022) 137–144.
ieee: 'A. Chitsazan, G. H. Klepp, and B. Glasmacher, “Effect of Surface Motion on
Heat Transfer and Pressure Force from Multiple Impinging Jets– A Numerical Study,”
International Journal of Heat and Technology, vol. 40, no. 1, pp. 137–144,
2022, doi: 10.18280/ijht.400116.'
mla: Chitsazan, Ali, et al. “Effect of Surface Motion on Heat Transfer and Pressure
Force from Multiple Impinging Jets– A Numerical Study.” International Journal
of Heat and Technology, vol. 40, no. 1, 2022, pp. 137–44, https://doi.org/10.18280/ijht.400116.
short: A. Chitsazan, G.H. Klepp, B. Glasmacher, International Journal of Heat and
Technology 40 (2022) 137–144.
ufg: 'Chitsazan, Ali/Klepp, Georg Heinrich/Glasmacher, Birgit: Effect of
Surface Motion on Heat Transfer and Pressure Force from Multiple Impinging Jets–
A Numerical Study, in: International Journal of Heat and Technology 40
(2022), H. 1, S. 137–144.'
van: Chitsazan A, Klepp GH, Glasmacher B. Effect of Surface Motion on Heat Transfer
and Pressure Force from Multiple Impinging Jets– A Numerical Study. International
Journal of Heat and Technology. 2022;40(1):137–44.
date_created: 2022-05-08T13:57:18Z
date_updated: 2024-08-08T12:55:44Z
department:
- _id: DEP6017
doi: 10.18280/ijht.400116
intvolume: ' 40'
issue: '1'
keyword:
- multiple jet
- heat transfer
- pressure force
- surface motion
- angled jet
- jet arrangement
language:
- iso: eng
page: 137-144
place: Bologna
publication: International Journal of Heat and Technology
publication_identifier:
issn:
- 0392-8764
publication_status: published
publisher: Pitagora
quality_controlled: '1'
status: public
title: Effect of Surface Motion on Heat Transfer and Pressure Force from Multiple
Impinging Jets– A Numerical Study
type: scientific_journal_article
user_id: '83781'
volume: 40
year: '2022'
...
---
_id: '8386'
abstract:
- lang: eng
text: The dynamic emulation of mechanical loads is required in a variety of applications
to test and validate control algorithms. Typical test setups consist of two mechanically
coupled motors, one of which is the Device Under Test (DUT) while the other is
used as a load drive for emulation. Existing emulation concepts either rely on
the differentiation of velocity feedback or utilize measured quantities of the
DUT. The emulation method proposed in this paper uses acceleration feedback to
control the torque of the load drive. It does not require any measured quantities
of the DUT which allows a simple replacement of the DUT’s motor and/or inverter
without the need of any conceptual changes. Based on a physical model, the emulation
method is derived analytically and analyzed numerically for the emulation of one-mass-systems.
The stability and emulation quality is evaluated considering two controller architectures.
Finally, experiments are conducted and compared to numeric simulations to test
the correct emulation.
author:
- first_name: Michael
full_name: Epp, Michael
last_name: Epp
- first_name: Martin
full_name: Griese, Martin
id: '52308'
last_name: Griese
- first_name: Thomas
full_name: Schulte, Thomas
id: '46242'
last_name: Schulte
citation:
ama: Epp M, Griese M, Schulte T. Acceleration Feedback Concepts for Dynamic Emulation
of Mechanical Loads. IEEE; 2021:1-6. doi:10.1109/IECON48115.2021.9589449
apa: 'Epp, M., Griese, M., & Schulte, T. (2021). Acceleration Feedback Concepts
for Dynamic Emulation of Mechanical Loads. IECON 2021 – 47th Annual Conference
of the IEEE Industrial Electronics Society (pp. 1–6). Toronto, ON, Canada
: IEEE. https://doi.org/10.1109/IECON48115.2021.9589449'
bjps: Epp M, Griese M and Schulte T (2021) Acceleration Feedback Concepts
for Dynamic Emulation of Mechanical Loads. IEEE.
chicago: Epp, Michael, Martin Griese, and Thomas Schulte. Acceleration Feedback
Concepts for Dynamic Emulation of Mechanical Loads. IECON 2021 – 47th Annual
Conference of the IEEE Industrial Electronics Society. IEEE, 2021. https://doi.org/10.1109/IECON48115.2021.9589449.
chicago-de: Epp, Michael, Martin Griese und Thomas Schulte. 2021. Acceleration
Feedback Concepts for Dynamic Emulation of Mechanical Loads. IECON 2021
– 47th Annual Conference of the IEEE Industrial Electronics Society. IEEE.
doi:10.1109/IECON48115.2021.9589449,
.
din1505-2-1: 'Epp, Michael ; Griese, Martin ; Schulte,
Thomas: Acceleration Feedback Concepts for Dynamic Emulation of Mechanical
Loads : IEEE, 2021'
havard: M. Epp, M. Griese, T. Schulte, Acceleration Feedback Concepts for Dynamic
Emulation of Mechanical Loads, IEEE, 2021.
ieee: M. Epp, M. Griese, and T. Schulte, Acceleration Feedback Concepts for Dynamic
Emulation of Mechanical Loads. IEEE, 2021, pp. 1–6.
mla: Epp, Michael, et al. “Acceleration Feedback Concepts for Dynamic Emulation
of Mechanical Loads.” IECON 2021 – 47th Annual Conference of the IEEE Industrial
Electronics Society, IEEE, 2021, pp. 1–6, doi:10.1109/IECON48115.2021.9589449.
short: M. Epp, M. Griese, T. Schulte, Acceleration Feedback Concepts for Dynamic
Emulation of Mechanical Loads, IEEE, 2021.
ufg: 'Epp, Michael et. al. (2021): Acceleration Feedback Concepts for Dynamic
Emulation of Mechanical Loads.'
van: Epp M, Griese M, Schulte T. Acceleration Feedback Concepts for Dynamic Emulation
of Mechanical Loads. IECON 2021 – 47th Annual Conference of the IEEE Industrial
Electronics Society. IEEE; 2021.
conference:
end_date: 2021-10-16
location: 'Toronto, ON, Canada '
name: IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society
start_date: 2021-10-13
date_created: 2022-06-22T14:29:18Z
date_updated: 2023-03-15T13:50:15Z
department:
- _id: DEP6020
- _id: DEP5022
doi: 10.1109/IECON48115.2021.9589449
keyword:
- Acceleration feedback
- emulation of mechanical loads
- motion and servo control
- machine and drive testing
language:
- iso: eng
page: 1-6
publication: IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics
Society
publication_identifier:
isbn:
- 978-1-6654-3554-3
issn:
- 2577-1647
publication_status: published
publisher: IEEE
status: public
title: Acceleration Feedback Concepts for Dynamic Emulation of Mechanical Loads
type: conference_editor_article
user_id: '56955'
year: 2021
...
---
_id: '2155'
abstract:
- lang: eng
text: Today, mobile devices (smartphones, tablets, etc.) are widespread and of high
importance for their users. Their performance as well as versatility increases
over time. This leads to the opportunity to use such devices for more specific
tasks like image processing in an industrial context. For the analysis of images
requirements like image quality (blur, illumination, etc.) as well as a defined
relative position of the object to be inspected are crucial. Since mobile devices
are handheld and used in constantly changing environments the challenge is to
fulfill these requirements. We present an approach to overcome the obstacles and
stabilize the image capturing process such that image analysis becomes significantly
improved on mobile devices. Therefore, image processing methods are combined with
sensor fusion concepts. The approach consists of three main parts. First, pose
estimation methods are used to guide a user moving the device to a defined position.
Second, the sensors data and the pose information are combined for relative motion
estimation. Finally, the image capturing process is automated. It is triggered
depending on the alignment of the device and the object as well as the image quality
that can be achieved under consideration of motion and environmental effects.
author:
- first_name: Kai-Fabian
full_name: Henning, Kai-Fabian
id: '44017'
last_name: Henning
- first_name: Alexander
full_name: Fritze, Alexander
last_name: Fritze
- first_name: Eugen
full_name: Gillich, Eugen
id: '1706'
last_name: Gillich
- first_name: Uwe
full_name: Mönks, Uwe
id: '1825'
last_name: Mönks
- first_name: Volker
full_name: Lohweg, Volker
id: '1804'
last_name: Lohweg
orcid: 0000-0002-3325-7887
citation:
ama: 'Henning K-F, Fritze A, Gillich E, Mönks U, Lohweg V. Stable Image Acquisition
for Mobile Image Processing Applications. In: IST/SPIE Electronic Imaging 2015,
Digital Photography and Mobile Imaging XI. San Francisco, CA, USA: SPIE; 2015:1-12.
doi:10.1117/12.2076146'
apa: 'Henning, K.-F., Fritze, A., Gillich, E., Mönks, U., & Lohweg, V. (2015).
Stable Image Acquisition for Mobile Image Processing Applications. In IST/SPIE
Electronic Imaging 2015, Digital Photography and Mobile Imaging XI (pp. 1–12).
San Francisco, CA, USA: SPIE. https://doi.org/10.1117/12.2076146'
bjps: 'Henning K-F et al. (2015) Stable Image Acquisition for Mobile
Image Processing Applications. IST/SPIE Electronic Imaging 2015, Digital Photography
and Mobile Imaging XI. San Francisco, CA, USA: SPIE, pp. 1–12.'
chicago: 'Henning, Kai-Fabian, Alexander Fritze, Eugen Gillich, Uwe Mönks, and Volker
Lohweg. “Stable Image Acquisition for Mobile Image Processing Applications.” In
IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging XI,
1–12. San Francisco, CA, USA: SPIE, 2015. https://doi.org/10.1117/12.2076146.'
chicago-de: 'Henning, Kai-Fabian, Alexander Fritze, Eugen Gillich, Uwe Mönks und
Volker Lohweg. 2015. Stable Image Acquisition for Mobile Image Processing Applications.
In: IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging
XI, 1–12. San Francisco, CA, USA: SPIE. doi:10.1117/12.2076146,
.'
din1505-2-1: 'Henning, Kai-Fabian
; Fritze, Alexander ; Gillich,
Eugen ; Mönks, Uwe ; Lohweg, Volker: Stable Image Acquisition
for Mobile Image Processing Applications. In: IST/SPIE Electronic Imaging 2015,
Digital Photography and Mobile Imaging XI. San Francisco, CA, USA : SPIE,
2015, S. 1–12'
havard: 'K.-F. Henning, A. Fritze, E. Gillich, U. Mönks, V. Lohweg, Stable Image
Acquisition for Mobile Image Processing Applications, in: IST/SPIE Electronic
Imaging 2015, Digital Photography and Mobile Imaging XI, SPIE, San Francisco,
CA, USA, 2015: pp. 1–12.'
ieee: K.-F. Henning, A. Fritze, E. Gillich, U. Mönks, and V. Lohweg, “Stable Image
Acquisition for Mobile Image Processing Applications,” in IST/SPIE Electronic
Imaging 2015, Digital Photography and Mobile Imaging XI, 2015, pp. 1–12.
mla: Henning, Kai-Fabian, et al. “Stable Image Acquisition for Mobile Image Processing
Applications.” IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile
Imaging XI, SPIE, 2015, pp. 1–12, doi:10.1117/12.2076146.
short: 'K.-F. Henning, A. Fritze, E. Gillich, U. Mönks, V. Lohweg, in: IST/SPIE
Electronic Imaging 2015, Digital Photography and Mobile Imaging XI, SPIE, San
Francisco, CA, USA, 2015, pp. 1–12.'
ufg: 'Henning, Kai-Fabian et. al. (2015): Stable Image Acquisition for Mobile
Image Processing Applications, in: IST/SPIE Electronic Imaging 2015, Digital
Photography and Mobile Imaging XI, San Francisco, CA, USA, S. 1–12.'
van: 'Henning K-F, Fritze A, Gillich E, Mönks U, Lohweg V. Stable Image Acquisition
for Mobile Image Processing Applications. In: IST/SPIE Electronic Imaging 2015,
Digital Photography and Mobile Imaging XI. San Francisco, CA, USA: SPIE; 2015.
p. 1–12.'
date_created: 2019-12-04T10:07:01Z
date_updated: 2023-03-15T13:49:39Z
department:
- _id: DEP5023
doi: 10.1117/12.2076146
keyword:
- Image processing
- Image acquisition
- Mobile devices Sensors
- Image fusion
- Motion estimation
- Cameras
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.spiedigitallibrary.org/conference-proceedings-of-spie/9404/94040N/Stable-image-acquisition-for-mobile-image-processing-applications/10.1117/12.2076146.full?SSO=1
oa: '1'
page: 1-12
place: San Francisco, CA, USA
publication: IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging
XI
publisher: SPIE
status: public
title: Stable Image Acquisition for Mobile Image Processing Applications
type: conference
user_id: '68554'
year: 2015
...
---
_id: '4337'
abstract:
- lang: eng
text: Our goal is to develop a system for coaching human motions (e.g., for rehabilitation
and daily health maintenance). This paper focuses on how to coach a user so that
his/her motion gets closer to the good template of a target motion. It is important
to efficiently advise the user to emulate the crucial features that define the
good template. The proposed system (1) automatically mines the crucial features
of any kind of motion from a set of motion features and (2) gives the user feedback
about how to modify the motion through an intuitive interface. The crucial features
are mined by feature sparsification through binary classification between the
samples of good and other motions. An interface for motion coaching is designed
to give feedback via different channels (e.g., visually, aurally), depending on
the type of error. To use the total system, all the user must do is just move
and then get feedback on the motion. Following experimental results, open problems
for future work are discussed.
author:
- first_name: Norimichi
full_name: Ukita, Norimichi
last_name: Ukita
- first_name: 'Daniel '
full_name: 'Kaulen, Daniel '
last_name: Kaulen
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Ukita N, Kaulen D, Röcker C. A User-Centered Design Approach to Physical Motion
Coaching Systems for Pervasive Health. In: Holzinger A, Röcker C, Ziefle M, eds.
Smart Health : Open Problems and Future Challenges. Vol 8700. Lecture Notes
in Computer Science. Heidelberg: Springer; 2015:189-208. doi:10.1007/978-3-319-16226-3_8'
apa: 'Ukita, N., Kaulen, D., & Röcker, C. (2015). A User-Centered Design Approach
to Physical Motion Coaching Systems for Pervasive Health. In A. Holzinger, C.
Röcker, & M. Ziefle (Eds.), Smart Health : Open Problems and Future Challenges
(Vol. 8700, pp. 189–208). Heidelberg: Springer. https://doi.org/10.1007/978-3-319-16226-3_8'
bjps: 'Ukita N, Kaulen D and Röcker C (2015) A User-Centered Design Approach
to Physical Motion Coaching Systems for Pervasive Health. In Holzinger A, Röcker
C and Ziefle M (eds), Smart Health : Open Problems and Future Challenges,
vol. 8700. Heidelberg: Springer, pp. 189–208.'
chicago: 'Ukita, Norimichi, Daniel Kaulen, and Carsten Röcker. “A User-Centered
Design Approach to Physical Motion Coaching Systems for Pervasive Health.” In
Smart Health : Open Problems and Future Challenges, edited by Andreas Holzinger,
Carsten Röcker, and Martina Ziefle, 8700:189–208. Lecture Notes in Computer Science.
Heidelberg: Springer, 2015. https://doi.org/10.1007/978-3-319-16226-3_8.'
chicago-de: 'Ukita, Norimichi, Daniel Kaulen und Carsten Röcker. 2015. A User-Centered
Design Approach to Physical Motion Coaching Systems for Pervasive Health. In:
Smart Health : Open Problems and Future Challenges, hg. von Andreas Holzinger,
Carsten Röcker, und Martina Ziefle, 8700:189–208. Lecture Notes in Computer Science.
Heidelberg: Springer. doi:10.1007/978-3-319-16226-3_8,
.'
din1505-2-1: 'Ukita, Norimichi ; Kaulen, Daniel ; Röcker,
Carsten: A User-Centered Design Approach to Physical Motion Coaching Systems
for Pervasive Health. In: Holzinger, A.
; Röcker, C. ; Ziefle,
M. (Hrsg.): Smart Health : Open Problems and Future Challenges,
Lecture Notes in Computer Science. Bd. 8700. Heidelberg : Springer, 2015,
S. 189–208'
havard: 'N. Ukita, D. Kaulen, C. Röcker, A User-Centered Design Approach to Physical
Motion Coaching Systems for Pervasive Health, in: A. Holzinger, C. Röcker, M.
Ziefle (Eds.), Smart Health : Open Problems and Future Challenges, Springer, Heidelberg,
2015: pp. 189–208.'
ieee: 'N. Ukita, D. Kaulen, and C. Röcker, “A User-Centered Design Approach to Physical
Motion Coaching Systems for Pervasive Health,” in Smart Health : Open Problems
and Future Challenges, vol. 8700, A. Holzinger, C. Röcker, and M. Ziefle,
Eds. Heidelberg: Springer, 2015, pp. 189–208.'
mla: 'Ukita, Norimichi, et al. “A User-Centered Design Approach to Physical Motion
Coaching Systems for Pervasive Health.” Smart Health : Open Problems and Future
Challenges, edited by Andreas Holzinger et al., vol. 8700, Springer, 2015,
pp. 189–208, doi:10.1007/978-3-319-16226-3_8.'
short: 'N. Ukita, D. Kaulen, C. Röcker, in: A. Holzinger, C. Röcker, M. Ziefle (Eds.),
Smart Health : Open Problems and Future Challenges, Springer, Heidelberg, 2015,
pp. 189–208.'
ufg: 'Ukita, Norimichi et. al. (2015): A User-Centered Design Approach to
Physical Motion Coaching Systems for Pervasive Health, in: Andreas Holzinger et.
al. (Hgg.): Smart Health : Open Problems and Future Challenges (=Lecture
Notes in Computer Science 8700), Heidelberg, S. 189–208.'
van: 'Ukita N, Kaulen D, Röcker C. A User-Centered Design Approach to Physical Motion
Coaching Systems for Pervasive Health. In: Holzinger A, Röcker C, Ziefle M, editors.
Smart Health : Open Problems and Future Challenges. Heidelberg: Springer; 2015.
p. 189–208. (Lecture Notes in Computer Science; vol. 8700).'
date_created: 2021-01-08T12:03:53Z
date_updated: 2023-03-15T13:49:52Z
department:
- _id: DEP5023
doi: 10.1007/978-3-319-16226-3_8
editor:
- first_name: Andreas
full_name: Holzinger, Andreas
last_name: Holzinger
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
- first_name: Martina
full_name: Ziefle, Martina
last_name: Ziefle
intvolume: ' 8700'
keyword:
- Motion coaching
- Error feedback
- Physical rehabilitation
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: ' 189 - 208'
place: Heidelberg
publication: 'Smart Health : Open Problems and Future Challenges'
publication_identifier:
eisbn:
- 978-3-319-16226-3
isbn:
- 978-3-319-16225-6
publication_status: published
publisher: Springer
series_title: Lecture Notes in Computer Science
status: public
title: A User-Centered Design Approach to Physical Motion Coaching Systems for Pervasive
Health
type: book_chapter
user_id: '15514'
volume: 8700
year: 2015
...
---
_id: '1674'
author:
- first_name: Jennifer
full_name: Seliger, Jennifer
last_name: Seliger
citation:
ama: 'Seliger J. Auf den Spuren von Coraline, die Piraten und Co. - Der Stellenwert
von CGI in der Produktion von Stop-Motion-Filmen. Lemgo: Hochschule Ostwestfalen-Lippe;
2015.'
apa: 'Seliger, J. (2015). Auf den Spuren von Coraline, die Piraten und Co. -
Der Stellenwert von CGI in der Produktion von Stop-Motion-Filmen. Lemgo: Hochschule
Ostwestfalen-Lippe.'
bjps: 'Seliger J (2015) Auf den Spuren von Coraline, die Piraten und Co.
- Der Stellenwert von CGI in der Produktion von Stop-Motion-Filmen. Lemgo:
Hochschule Ostwestfalen-Lippe.'
chicago: 'Seliger, Jennifer. Auf den Spuren von Coraline, die Piraten und Co.
- Der Stellenwert von CGI in der Produktion von Stop-Motion-Filmen. Lemgo:
Hochschule Ostwestfalen-Lippe, 2015.'
chicago-de: 'Seliger, Jennifer. 2015. Auf den Spuren von Coraline, die Piraten
und Co. - Der Stellenwert von CGI in der Produktion von Stop-Motion-Filmen.
Lemgo: Hochschule Ostwestfalen-Lippe.'
din1505-2-1: 'Seliger, Jennifer: Auf
den Spuren von Coraline, die Piraten und Co. - Der Stellenwert von CGI in der
Produktion von Stop-Motion-Filmen. Lemgo : Hochschule Ostwestfalen-Lippe,
2015'
havard: J. Seliger, Auf den Spuren von Coraline, die Piraten und Co. - Der Stellenwert
von CGI in der Produktion von Stop-Motion-Filmen, Hochschule Ostwestfalen-Lippe,
Lemgo, 2015.
ieee: 'J. Seliger, Auf den Spuren von Coraline, die Piraten und Co. - Der Stellenwert
von CGI in der Produktion von Stop-Motion-Filmen. Lemgo: Hochschule Ostwestfalen-Lippe,
2015.'
mla: Seliger, Jennifer. Auf den Spuren von Coraline, die Piraten und Co. - Der
Stellenwert von CGI in der Produktion von Stop-Motion-Filmen. Hochschule Ostwestfalen-Lippe,
2015.
short: J. Seliger, Auf den Spuren von Coraline, die Piraten und Co. - Der Stellenwert
von CGI in der Produktion von Stop-Motion-Filmen, Hochschule Ostwestfalen-Lippe,
Lemgo, 2015.
ufg: 'Seliger, Jennifer (2015): Auf den Spuren von Coraline, die Piraten
und Co. - Der Stellenwert von CGI in der Produktion von Stop-Motion-Filmen, Lemgo.'
van: 'Seliger J. Auf den Spuren von Coraline, die Piraten und Co. - Der Stellenwert
von CGI in der Produktion von Stop-Motion-Filmen. Lemgo: Hochschule Ostwestfalen-Lippe;
2015. 119 p.'
date_created: 2019-07-29T08:39:36Z
date_updated: 2023-03-15T13:49:37Z
ddc:
- '770'
department:
- _id: DEP2001
file:
- access_level: closed
content_type: application/pdf
creator: czr-e2t
date_created: 2019-07-29T08:41:01Z
date_updated: 2019-07-29T08:41:01Z
file_id: '1675'
file_name: Auf den Spuren von Coraline, die Piraten und Co.pdf
file_size: 39591361
relation: main_file
file_date_updated: 2019-07-29T08:41:01Z
has_accepted_license: '1'
keyword:
- Stop-Motion
language:
- iso: ger
page: '119'
place: Lemgo
publication_status: published
publisher: Hochschule Ostwestfalen-Lippe
status: public
supervisor:
- first_name: Peter
full_name: Kaboth, Peter
id: '11179'
last_name: Kaboth
- first_name: Bianca
full_name: Büter, Bianca
id: '43960'
last_name: Büter
title: Auf den Spuren von Coraline, die Piraten und Co. - Der Stellenwert von CGI
in der Produktion von Stop-Motion-Filmen
type: bachelor_thesis
user_id: '74004'
year: 2015
...
---
_id: '4374'
abstract:
- lang: eng
text: Our goal is to develop a system for coaching human motions (e.g. rehabilitation).
Such a coaching system should have several function such as motion measurement,
evaluation, and feedback. Among all, this paper focuses on how to modify a user’s
motion so that it gets closer to the good template of a target motion. To this
end, it is important to efficiently advise the user to emulate the crucial features
that define the good template. The proposed method automatically mines the crucial
features of any kind of motions from a set of all motion features. The crucial
features are mined based on feature sparsification through binary classification
between the samples of good and other motions.
author:
- first_name: 'Norimichi '
full_name: 'Ukita, Norimichi '
last_name: Ukita
- first_name: Koki
full_name: Eimon, Koki
last_name: Eimon
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Ukita N, Eimon K, Röcker C. Mining Crucial Features for Automatic Rehabilitation
Coaching Systems. In: Hein A, ICST (Institute for Computer Sciences, Social-Informatics
and Telecommunications Engineering) , eds. Proceedings of the 8th International
Conference on Pervasive Computing Technologies for Healthcare . Brussels,
Belgium : ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications
Engineering); 2014:223-226. doi:10.4108/icst.pervasivehealth.2014.255133'
apa: 'Ukita, N., Eimon, K., & Röcker, C. (2014). Mining Crucial Features for
Automatic Rehabilitation Coaching Systems. In A. Hein & ICST (Institute for
Computer Sciences, Social-Informatics and Telecommunications Engineering) (Eds.),
Proceedings of the 8th International Conference on Pervasive Computing Technologies
for Healthcare (pp. 223–226). Brussels, Belgium : ICST (Institute for Computer
Sciences, Social-Informatics and Telecommunications Engineering). https://doi.org/10.4108/icst.pervasivehealth.2014.255133'
bjps: 'Ukita N, Eimon K and Röcker C (2014) Mining Crucial Features for Automatic
Rehabilitation Coaching Systems. In Hein A and ICST (Institute for Computer Sciences,
Social-Informatics and Telecommunications Engineering) (eds), Proceedings
of the 8th International Conference on Pervasive Computing Technologies for Healthcare
. Brussels, Belgium : ICST (Institute for Computer Sciences, Social-Informatics
and Telecommunications Engineering), pp. 223–226.'
chicago: 'Ukita, Norimichi , Koki Eimon, and Carsten Röcker. “Mining Crucial Features
for Automatic Rehabilitation Coaching Systems.” In Proceedings of the 8th International
Conference on Pervasive Computing Technologies for Healthcare , edited by
Andreas Hein and ICST (Institute for Computer Sciences, Social-Informatics and
Telecommunications Engineering) , 223–26. Brussels, Belgium : ICST (Institute
for Computer Sciences, Social-Informatics and Telecommunications Engineering),
2014. https://doi.org/10.4108/icst.pervasivehealth.2014.255133.'
chicago-de: 'Ukita, Norimichi , Koki Eimon und Carsten Röcker. 2014. Mining Crucial
Features for Automatic Rehabilitation Coaching Systems. In: Proceedings of
the 8th International Conference on Pervasive Computing Technologies for Healthcare
, hg. von Andreas Hein und ICST (Institute for Computer Sciences, Social-Informatics
and Telecommunications Engineering) , 223–226. Brussels, Belgium : ICST (Institute
for Computer Sciences, Social-Informatics and Telecommunications Engineering).
doi:10.4108/icst.pervasivehealth.2014.255133,
.'
din1505-2-1: 'Ukita, Norimichi ;
Eimon, Koki ; Röcker,
Carsten: Mining Crucial Features for Automatic Rehabilitation Coaching
Systems. In: Hein, A. ; ICST
(Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering)
(Hrsg.): Proceedings of the 8th International Conference on Pervasive
Computing Technologies for Healthcare . Brussels, Belgium : ICST (Institute
for Computer Sciences, Social-Informatics and Telecommunications Engineering),
2014, S. 223–226'
havard: 'N. Ukita, K. Eimon, C. Röcker, Mining Crucial Features for Automatic Rehabilitation
Coaching Systems, in: A. Hein, ICST (Institute for Computer Sciences, Social-Informatics
and Telecommunications Engineering) (Eds.), Proceedings of the 8th International
Conference on Pervasive Computing Technologies for Healthcare , ICST (Institute
for Computer Sciences, Social-Informatics and Telecommunications Engineering),
Brussels, Belgium , 2014: pp. 223–226.'
ieee: N. Ukita, K. Eimon, and C. Röcker, “Mining Crucial Features for Automatic
Rehabilitation Coaching Systems,” in Proceedings of the 8th International Conference
on Pervasive Computing Technologies for Healthcare , Oldenburg, 2014, pp.
223–226.
mla: Ukita, Norimichi, et al. “Mining Crucial Features for Automatic Rehabilitation
Coaching Systems.” Proceedings of the 8th International Conference on Pervasive
Computing Technologies for Healthcare , edited by Andreas Hein and ICST (Institute
for Computer Sciences, Social-Informatics and Telecommunications Engineering)
, ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications
Engineering), 2014, pp. 223–26, doi:10.4108/icst.pervasivehealth.2014.255133.
short: 'N. Ukita, K. Eimon, C. Röcker, in: A. Hein, ICST (Institute for Computer
Sciences, Social-Informatics and Telecommunications Engineering) (Eds.), Proceedings
of the 8th International Conference on Pervasive Computing Technologies for Healthcare
, ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications
Engineering), Brussels, Belgium , 2014, pp. 223–226.'
ufg: 'Ukita, Norimichi et. al. (2014): Mining Crucial Features for Automatic
Rehabilitation Coaching Systems, in: Andreas Hein/ICST (Institute for Computer
Sciences, Social-Informatics and Telecommunications Engineering) (Hgg.): Proceedings
of the 8th International Conference on Pervasive Computing Technologies for Healthcare
, Brussels, Belgium , S. 223–226.'
van: 'Ukita N, Eimon K, Röcker C. Mining Crucial Features for Automatic Rehabilitation
Coaching Systems. In: Hein A, ICST (Institute for Computer Sciences, Social-Informatics
and Telecommunications Engineering) , editors. Proceedings of the 8th International
Conference on Pervasive Computing Technologies for Healthcare . Brussels, Belgium
: ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications
Engineering); 2014. p. 223–6.'
conference:
end_date: 2014-05-23
location: Oldenburg
name: 8th International Conference on Pervasive Computing Technologies for Healthcare
start_date: 2014-05-20
corporate_editor:
- 'ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications
Engineering) '
date_created: 2021-01-14T10:13:23Z
date_updated: 2023-03-15T13:49:52Z
department:
- _id: DEP5023
doi: 10.4108/icst.pervasivehealth.2014.255133
editor:
- first_name: Andreas
full_name: Hein, Andreas
last_name: Hein
extern: '1'
keyword:
- motion coach
- rehabilitation
- pervasive health
- ambient assisted living
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 223-226
place: 'Brussels, Belgium '
publication: 'Proceedings of the 8th International Conference on Pervasive Computing
Technologies for Healthcare '
publication_identifier:
isbn:
- 978-1-63190-011-2
publication_status: published
publisher: ' ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications
Engineering)'
status: public
title: Mining Crucial Features for Automatic Rehabilitation Coaching Systems
type: conference
user_id: '15514'
year: 2014
...
---
_id: '4378'
abstract:
- lang: eng
text: The development of a widely applicable automatic motion coaching system requires
one to address a lot of issues including motion capturing, motion analysis and
comparison, error detection as well as error feedback. In order to cope with this
complexity, most existing approaches focus on a specific motion sequence or exercise.
As a first step towards the development of a more generic system, this paper systematically
analyzes different error and feedback types. A prototype of a feedback system
that addresses multiple modalities is presented. The system allows to evaluate
the applicability of the proposed feedback techniques for arbitrary types of motions
in a next step.
author:
- first_name: Norimichi
full_name: Ukita, Norimichi
last_name: Ukita
- first_name: Daniel
full_name: Kaulen, Daniel
last_name: Kaulen
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Ukita N, Kaulen D, Röcker C. Towards an Automatic Motion Coaching System:
Feedback Techniques for Different Types of Motion Errors. In: Holzinger A, Institute
for Systems and Technologies of Information, Control and Communication, eds. Proceedings
of the International Conference on Physiological Computing Systems (PhyCS’14).
Vol 1. [S.l.] : SCITEPRESS ; 2014:167-172. doi:10.5220/0004884901670172'
apa: 'Ukita, N., Kaulen, D., & Röcker, C. (2014). Towards an Automatic Motion
Coaching System: Feedback Techniques for Different Types of Motion Errors. In
A. Holzinger & Institute for Systems and Technologies of Information, Control
and Communication (Eds.), Proceedings of the International Conference on Physiological
Computing Systems (PhyCS’14) (Vol. 1, pp. 167–172). [S.l.] : SCITEPRESS
. https://doi.org/10.5220/0004884901670172'
bjps: 'Ukita N, Kaulen D and Röcker C (2014) Towards an Automatic Motion
Coaching System: Feedback Techniques for Different Types of Motion Errors. In
Holzinger A and Institute for Systems and Technologies of Information, Control
and Communication (eds), Proceedings of the International Conference on Physiological
Computing Systems (PhyCS’14), vol. 1. [S.l.] : SCITEPRESS , pp. 167–172.'
chicago: 'Ukita, Norimichi, Daniel Kaulen, and Carsten Röcker. “Towards an Automatic
Motion Coaching System: Feedback Techniques for Different Types of Motion Errors.”
In Proceedings of the International Conference on Physiological Computing Systems
(PhyCS’14), edited by Andreas Holzinger and Institute for Systems and Technologies
of Information, Control and Communication, 1:167–72. [S.l.] : SCITEPRESS , 2014.
https://doi.org/10.5220/0004884901670172.'
chicago-de: 'Ukita, Norimichi, Daniel Kaulen und Carsten Röcker. 2014. Towards an
Automatic Motion Coaching System: Feedback Techniques for Different Types of Motion
Errors. In: Proceedings of the International Conference on Physiological Computing
Systems (PhyCS’14), hg. von Andreas Holzinger und Institute for Systems and
Technologies of Information, Control and Communication, 1:167–172. [S.l.] : SCITEPRESS
. doi:10.5220/0004884901670172,
.'
din1505-2-1: 'Ukita, Norimichi ; Kaulen, Daniel ; Röcker,
Carsten: Towards an Automatic Motion Coaching System: Feedback Techniques
for Different Types of Motion Errors. In: Holzinger,
A. ; Institute for Systems and
Technologies of Information, Control and Communication (Hrsg.): Proceedings
of the International Conference on Physiological Computing Systems (PhyCS’14).
Bd. 1. [S.l.] : SCITEPRESS , 2014, S. 167–172'
havard: 'N. Ukita, D. Kaulen, C. Röcker, Towards an Automatic Motion Coaching System:
Feedback Techniques for Different Types of Motion Errors, in: A. Holzinger, Institute
for Systems and Technologies of Information, Control and Communication (Eds.),
Proceedings of the International Conference on Physiological Computing Systems
(PhyCS’14), SCITEPRESS , [S.l.] , 2014: pp. 167–172.'
ieee: 'N. Ukita, D. Kaulen, and C. Röcker, “Towards an Automatic Motion Coaching
System: Feedback Techniques for Different Types of Motion Errors,” in Proceedings
of the International Conference on Physiological Computing Systems (PhyCS’14),
Lisbon, Portugal, 2014, vol. 1, no. PhyCS, pp. 167–172.'
mla: 'Ukita, Norimichi, et al. “Towards an Automatic Motion Coaching System: Feedback
Techniques for Different Types of Motion Errors.” Proceedings of the International
Conference on Physiological Computing Systems (PhyCS’14), edited by Andreas
Holzinger and Institute for Systems and Technologies of Information, Control
and Communication, vol. 1, no. PhyCS, SCITEPRESS , 2014, pp. 167–72, doi:10.5220/0004884901670172.'
short: 'N. Ukita, D. Kaulen, C. Röcker, in: A. Holzinger, Institute for Systems
and Technologies of Information, Control and Communication (Eds.), Proceedings
of the International Conference on Physiological Computing Systems (PhyCS’14), SCITEPRESS
, [S.l.] , 2014, pp. 167–172.'
ufg: 'Ukita, Norimichi et. al. (2014): Towards an Automatic Motion Coaching
System: Feedback Techniques for Different Types of Motion Errors, in: Andreas
Holzinger/ Institute for Systems and Technologies of Information, Control and
Communication (Hgg.): Proceedings of the International Conference on Physiological
Computing Systems (PhyCS’14) (= 1), [S.l.] , S. 167–172.'
van: 'Ukita N, Kaulen D, Röcker C. Towards an Automatic Motion Coaching System:
Feedback Techniques for Different Types of Motion Errors. In: Holzinger A, Institute
for Systems and Technologies of Information, Control and Communication, editors.
Proceedings of the International Conference on Physiological Computing Systems
(PhyCS’14). [S.l.] : SCITEPRESS ; 2014. p. 167–72.'
conference:
end_date: 20014-01-09
location: Lisbon, Portugal
name: International Conference on Physiological Computing Systems (PhyCS'14)
start_date: 2014-01-07
corporate_editor:
- ' Institute for Systems and Technologies of Information, Control and Communication'
date_created: 2021-01-14T10:13:28Z
date_updated: 2023-03-15T13:49:52Z
department:
- _id: DEP5023
doi: 10.5220/0004884901670172
editor:
- first_name: Andreas
full_name: Holzinger, Andreas
last_name: Holzinger
extern: '1'
intvolume: ' 1'
issue: PhyCS
keyword:
- Motion Coaching
- Motion Error Feedback
- Prototyping
- Error Visualization
- Error Audiolization.
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 167 - 172
place: ' [S.l.] '
publication: Proceedings of the International Conference on Physiological Computing
Systems (PhyCS'14)
publication_identifier:
unknown:
- 978-989-758-006-2
publication_status: published
publisher: ' SCITEPRESS '
status: public
title: 'Towards an Automatic Motion Coaching System: Feedback Techniques for Different
Types of Motion Errors'
type: conference
user_id: '15514'
volume: 1
year: 2014
...