---
_id: '9360'
abstract:
- lang: eng
text: "Background: \r\nErrors can have dangerous consequences, resulting in a preventive
strategy in most company-based technical vocational education and training (TVET).
On the contrary, errors provide a useful opportunity for learning due to mismatches
of mental models and reality and especially to improve occupational safety and
health (OSH). \r\nObjective: \r\nThis article presents a didactic concept for
developing a learning system based on learning from errors. Learners shall directly
experience the consequences of erroneous actions through presenting error consequences
in augmented reality to avoid negative, dangerous, or cost-intensive outcomes.
\r\nMethods: \r\nEmpirical data prove errors to be particularly effective in TVET.
A formal description of a work system is systematically adopted to outline a connection
between work, errors concerning OSH, and a didactic concept. A proof-of-concept
systematically performs a use case for the developed learning system. It supports
critical reflections from a technical, safety, and didactical perspective, naming
implications and limitations. \r\nResults: \r\nBy learning from errors, a work-based
didactic concept supports OSH competencies relying on a learning system. The latter
integrates digital twins of the work system to simulate and visualise dangerous
error consequences for identified erroneous actions in a technical proof-of-concept.
Results demonstrate the ability to detect action errors in work processes and
simulations of error consequences in augmented reality. \r\nConclusion: \r\nThe
technical learning system for OSH education extends existing learning approaches
by showcasing virtual consequences. However, capabilities are limited regarding
prepared learning scenarios with predefined critical errors. Future studies should
assess learning effectiveness in an industrial scenario and investigate its usability."
article_type: original
author:
- first_name: Marvin
full_name: Goppold, Marvin
last_name: Goppold
- first_name: Jan-Phillip
full_name: Herrmann, Jan-Phillip
id: '75846'
last_name: Herrmann
- first_name: Sven
full_name: Tackenberg, Sven
id: '71470'
last_name: Tackenberg
- first_name: Christopher
full_name: Brandl, Christopher
last_name: Brandl
- first_name: Verena
full_name: Nitsch , Verena
last_name: 'Nitsch '
citation:
ama: Goppold M, Herrmann JP, Tackenberg S, Brandl C, Nitsch V. An error-based augmented
reality learning system for work-based occupational safety and health education.
Work. 2022;72(4):1563-1575. doi:10.3233/WOR-211243
apa: Goppold, M., Herrmann, J.-P., Tackenberg, S., Brandl, C., & Nitsch , V.
(2022). An error-based augmented reality learning system for work-based occupational
safety and health education. Work, 72(4), 1563–1575. https://doi.org/10.3233/WOR-211243
bjps: Goppold M et al. (2022) An Error-Based Augmented Reality Learning
System for Work-Based Occupational Safety and Health Education. Work 72,
1563–1575.
chicago: 'Goppold, Marvin, Jan-Phillip Herrmann, Sven Tackenberg, Christopher Brandl,
and Verena Nitsch . “An Error-Based Augmented Reality Learning System for Work-Based
Occupational Safety and Health Education.” Work 72, no. 4 (2022): 1563–75.
https://doi.org/10.3233/WOR-211243.'
chicago-de: 'Goppold, Marvin, Jan-Phillip Herrmann, Sven Tackenberg, Christopher
Brandl und Verena Nitsch . 2022. An error-based augmented reality learning system
for work-based occupational safety and health education. Work 72, Nr. 4:
1563–1575. doi:10.3233/WOR-211243,
.'
din1505-2-1: 'Goppold, Marvin ; Herrmann, Jan-Phillip ; Tackenberg,
Sven ; Brandl, Christopher
; Nitsch , Verena: An error-based
augmented reality learning system for work-based occupational safety and health
education. In: Work Bd. 72. Amsterdam, IOS Press (2022), Nr. 4, S. 1563–1575'
havard: M. Goppold, J.-P. Herrmann, S. Tackenberg, C. Brandl, V. Nitsch , An error-based
augmented reality learning system for work-based occupational safety and health
education, Work. 72 (2022) 1563–1575.
ieee: 'M. Goppold, J.-P. Herrmann, S. Tackenberg, C. Brandl, and V. Nitsch , “An
error-based augmented reality learning system for work-based occupational safety
and health education,” Work, vol. 72, no. 4, pp. 1563–1575, 2022, doi:
10.3233/WOR-211243.'
mla: Goppold, Marvin, et al. “An Error-Based Augmented Reality Learning System for
Work-Based Occupational Safety and Health Education.” Work, vol. 72, no.
4, 2022, pp. 1563–75, https://doi.org/10.3233/WOR-211243.
short: M. Goppold, J.-P. Herrmann, S. Tackenberg, C. Brandl, V. Nitsch , Work 72
(2022) 1563–1575.
ufg: 'Goppold, Marvin u. a.: An error-based augmented reality learning system
for work-based occupational safety and health education, in: Work 72 (2022),
H. 4, S. 1563–1575.'
van: Goppold M, Herrmann JP, Tackenberg S, Brandl C, Nitsch V. An error-based augmented
reality learning system for work-based occupational safety and health education.
Work. 2022;72(4):1563–75.
date_created: 2023-01-25T13:37:17Z
date_updated: 2024-08-06T11:53:35Z
department:
- _id: DEP7000
doi: 10.3233/WOR-211243
intvolume: ' 72'
issue: '4'
keyword:
- Vocational education
- digital twin
- work system design
language:
- iso: eng
page: 1563-1575
place: Amsterdam
publication: Work
publication_identifier:
eissn:
- '1875-9270 '
issn:
- 1051-9815
publication_status: published
publisher: IOS Press
quality_controlled: '1'
status: public
title: An error-based augmented reality learning system for work-based occupational
safety and health education
type: scientific_journal_article
user_id: '83781'
volume: 72
year: '2022'
...
---
_id: '9666'
abstract:
- lang: eng
text: In mechanical engineering, individual functional units of a machine are often
assembled by one operator at single workstations or at one-piece flow lines. Based
on the order information, the required parts are taken from flow racks and assembled
step by step to build a functional unit. The existing assembly concepts have two
decisive disadvantages in operational practice. First, a large number of components
to be provided leads to long walking distances at the work station or line. Second,
as the complexity of the assembly task increases, the informational portion of
the work increases, so that paper-based information provision can lead to unnecessary
assembly errors and additional times. For these reasons, a compacted assembly
system has been developed in which, firstly, material is supplied via driven carousels
and, secondly, the necessary information is provided to the operator via a cognitive
assistance system. The article shows that this concept can reduce walking distances
while avoiding assembly errors and additional times.
author:
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Alexander
full_name: Nikolenko, Alexander
id: '42509'
last_name: Nikolenko
- first_name: Nils
full_name: Beckmann, Nils
id: '62068'
last_name: Beckmann
orcid: 0000-0003-4337-7978
- first_name: Frederic
full_name: Meyer, Frederic
id: '70963'
last_name: Meyer
citation:
ama: 'Hinrichsen S, Nikolenko A, Beckmann N, Meyer F. Development of a New Type
of Carousel-based Compacted Work System for Mixed-model Assembly in Mechanical
Engineering. In: IEEE International Conference on Industrial Engineering and Engineering
Management, Institute of Electrical and Electronics Engineers, IEEE Technology
and Engineering Management Society , eds. IEEM2022 : IEEE International Conference
on Industrial Engineering and Engineering Management (IEEM) : Kuala Lumpur, Malaysia,
07-10 December 2022 . IEEE; 2022. doi:10.1109/ieem55944.2022.9989731'
apa: 'Hinrichsen, S., Nikolenko, A., Beckmann, N., & Meyer, F. (2022). Development
of a New Type of Carousel-based Compacted Work System for Mixed-model Assembly
in Mechanical Engineering. In IEEE International Conference on Industrial Engineering
and Engineering Management, Institute of Electrical and Electronics Engineers,
& IEEE Technology and Engineering Management Society (Eds.), IEEM2022 :
IEEE International Conference on Industrial Engineering and Engineering Management
(IEEM) : Kuala Lumpur, Malaysia, 07-10 December 2022 . IEEE. https://doi.org/10.1109/ieem55944.2022.9989731'
bjps: 'Hinrichsen S et al. (2022) Development of a New Type of Carousel-Based
Compacted Work System for Mixed-Model Assembly in Mechanical Engineering. In IEEE
International Conference on Industrial Engineering and Engineering Management,
Institute of Electrical and Electronics Engineers, and IEEE Technology and Engineering
Management Society (eds), IEEM2022 : IEEE International Conference on Industrial
Engineering and Engineering Management (IEEM) : Kuala Lumpur, Malaysia, 07-10
December 2022 . Piscataway, NJ: IEEE.'
chicago: 'Hinrichsen, Sven, Alexander Nikolenko, Nils Beckmann, and Frederic Meyer.
“Development of a New Type of Carousel-Based Compacted Work System for Mixed-Model
Assembly in Mechanical Engineering.” In IEEM2022 : IEEE International Conference
on Industrial Engineering and Engineering Management (IEEM) : Kuala Lumpur, Malaysia,
07-10 December 2022 , edited by IEEE International Conference on Industrial
Engineering and Engineering Management, Institute of Electrical and Electronics
Engineers, and IEEE Technology and Engineering Management Society . Piscataway,
NJ: IEEE, 2022. https://doi.org/10.1109/ieem55944.2022.9989731.'
chicago-de: 'Hinrichsen, Sven, Alexander Nikolenko, Nils Beckmann und Frederic Meyer.
2022. Development of a New Type of Carousel-based Compacted Work System for Mixed-model
Assembly in Mechanical Engineering. In: IEEM2022 : IEEE International Conference
on Industrial Engineering and Engineering Management (IEEM) : Kuala Lumpur, Malaysia,
07-10 December 2022 , hg. von IEEE International Conference on Industrial
Engineering and Engineering Management, Institute of Electrical and Electronics
Engineers, und IEEE Technology and Engineering Management Society . Piscataway,
NJ: IEEE. doi:10.1109/ieem55944.2022.9989731,
.'
din1505-2-1: 'Hinrichsen, Sven ; Nikolenko, Alexander ; Beckmann,
Nils ; Meyer, Frederic: Development
of a New Type of Carousel-based Compacted Work System for Mixed-model Assembly
in Mechanical Engineering. In: IEEE International
Conference on Industrial Engineering and Engineering Management ; Institute of Electrical and Electronics Engineers
; IEEE Technology and Engineering Management
Society (Hrsg.): IEEM2022 : IEEE International Conference on Industrial
Engineering and Engineering Management (IEEM) : Kuala Lumpur, Malaysia, 07-10
December 2022 . Piscataway, NJ : IEEE, 2022'
havard: 'S. Hinrichsen, A. Nikolenko, N. Beckmann, F. Meyer, Development of a New
Type of Carousel-based Compacted Work System for Mixed-model Assembly in Mechanical
Engineering, in: IEEE International Conference on Industrial Engineering and Engineering
Management, Institute of Electrical and Electronics Engineers, IEEE Technology
and Engineering Management Society (Eds.), IEEM2022 : IEEE International Conference
on Industrial Engineering and Engineering Management (IEEM) : Kuala Lumpur, Malaysia,
07-10 December 2022 , IEEE, Piscataway, NJ, 2022.'
ieee: 'S. Hinrichsen, A. Nikolenko, N. Beckmann, and F. Meyer, “Development of a
New Type of Carousel-based Compacted Work System for Mixed-model Assembly in Mechanical
Engineering,” in IEEM2022 : IEEE International Conference on Industrial Engineering
and Engineering Management (IEEM) : Kuala Lumpur, Malaysia, 07-10 December 2022
, Kuala Lumpur, 2022. doi: 10.1109/ieem55944.2022.9989731.'
mla: 'Hinrichsen, Sven, et al. “Development of a New Type of Carousel-Based Compacted
Work System for Mixed-Model Assembly in Mechanical Engineering.” IEEM2022 :
IEEE International Conference on Industrial Engineering and Engineering Management
(IEEM) : Kuala Lumpur, Malaysia, 07-10 December 2022 , edited by IEEE International
Conference on Industrial Engineering and Engineering Management et al., IEEE,
2022, https://doi.org/10.1109/ieem55944.2022.9989731.'
short: 'S. Hinrichsen, A. Nikolenko, N. Beckmann, F. Meyer, in: IEEE International
Conference on Industrial Engineering and Engineering Management, Institute of
Electrical and Electronics Engineers, IEEE Technology and Engineering Management
Society (Eds.), IEEM2022 : IEEE International Conference on Industrial Engineering
and Engineering Management (IEEM) : Kuala Lumpur, Malaysia, 07-10 December 2022
, IEEE, Piscataway, NJ, 2022.'
ufg: 'Hinrichsen, Sven u. a.: Development of a New Type of Carousel-based
Compacted Work System for Mixed-model Assembly in Mechanical Engineering, in:
IEEE International Conference on Industrial Engineering and Engineering Management/Institute
of Electrical and Electronics Engineers, IEEE Technology and Engineering Management
Society (Hgg.): IEEM2022 : IEEE International Conference on Industrial Engineering
and Engineering Management (IEEM) : Kuala Lumpur, Malaysia, 07-10 December 2022
, Piscataway, NJ 2022.'
van: 'Hinrichsen S, Nikolenko A, Beckmann N, Meyer F. Development of a New Type
of Carousel-based Compacted Work System for Mixed-model Assembly in Mechanical
Engineering. In: IEEE International Conference on Industrial Engineering and Engineering
Management, Institute of Electrical and Electronics Engineers, IEEE Technology
and Engineering Management Society , editors. IEEM2022 : IEEE International Conference
on Industrial Engineering and Engineering Management (IEEM) : Kuala Lumpur, Malaysia,
07-10 December 2022 . Piscataway, NJ: IEEE; 2022.'
conference:
end_date: 2022-12-10
location: Kuala Lumpur
name: 'IEEE International Conference on Industrial Engineering and Engineering Management
(IEEM) '
start_date: 2022-12-07
corporate_editor:
- IEEE International Conference on Industrial Engineering and Engineering Management
- Institute of Electrical and Electronics Engineers
- 'IEEE Technology and Engineering Management Society '
date_created: 2023-03-28T06:36:41Z
date_updated: 2024-08-02T14:04:53Z
department:
- _id: DEP7020
- _id: DEP1305
doi: 10.1109/ieem55944.2022.9989731
keyword:
- assembly system
- assistance system
- complexity
language:
- iso: eng
place: Piscataway, NJ
publication: 'IEEM2022 : IEEE International Conference on Industrial Engineering and
Engineering Management (IEEM) : Kuala Lumpur, Malaysia, 07-10 December 2022 '
publication_identifier:
eisbn:
- 978-1-6654-8687-3
isbn:
- 978-1-6654-8688-0
publication_status: published
publisher: IEEE
status: public
title: Development of a New Type of Carousel-based Compacted Work System for Mixed-model
Assembly in Mechanical Engineering
type: conference
user_id: '83781'
year: '2022'
...
---
_id: '11803'
abstract:
- lang: eng
text: Sub-optimal control policies in intersection traffic signal controllers (TSC)
contribute to congestion and lead to negative effects on human health and the
environment. Reinforcement learning (RL) for traffic signal control is a promising
approach to design better control policies and has attracted considerable research
interest in recent years. However, most work done in this area used simplified
simulation environments of traffic scenarios to train RL-based TSC. To deploy
RL in real-world traffic systems, the gap between simplified simulation environments
and real-world applications has to be closed. Therefore, we propose LemgoRL, a
benchmark tool to train RL agents as TSC in a realistic simulation environment
of Lemgo, a medium-sized town in Germany. In addition to the realistic simulation
model, LemgoRL encompasses a traffic signal logic unit that ensures compliance
with all regulatory and safety requirements. LemgoRL offers the same interface
as the well-known OpenAI gym toolkit to enable easy deployment in existing research
work. To demonstrate the functionality and applicability of LemgoRL, we train
a state-of-the-art Deep RL algorithm on a CPU cluster utilizing a framework for
distributed and parallel RL and compare its performance with other methods. Our
benchmark tool drives the development of RL algorithms towards real-world applications.
author:
- first_name: Arthur
full_name: Müller, Arthur
last_name: Müller
- first_name: Vishal
full_name: Rangras, Vishal
id: '76044'
last_name: Rangras
- first_name: Georg
full_name: Schnittker, Georg
last_name: Schnittker
- first_name: Michael
full_name: Waldmann, Michael
last_name: Waldmann
- first_name: Maxim
full_name: Friesen, Maxim
id: '61517'
last_name: Friesen
- first_name: Tobias
full_name: Ferfers, Tobias
last_name: Ferfers
- first_name: Lukas
full_name: Schreckenberg, Lukas
last_name: Schreckenberg
- first_name: Florian
full_name: Hufen, Florian
last_name: Hufen
- first_name: Jürgen
full_name: Jasperneite, Jürgen
id: '1899'
last_name: Jasperneite
- first_name: Marco
full_name: Wiering, Marco
last_name: Wiering
citation:
ama: Müller A, Rangras V, Schnittker G, et al. Towards Real-World Deployment
of Reinforcement Learning for Traffic Signal Control. (Wani MA, IEEE ICMLA, Institute
of Electrical and Electronics Engineers, eds.). IEEE; 2021. doi:10.1109/ICMLA52953.2021.00085
apa: Müller, A., Rangras, V., Schnittker, G., Waldmann, M., Friesen, M., Ferfers,
T., Schreckenberg, L., Hufen, F., Jasperneite, J., & Wiering, M. (2021). Towards
Real-World Deployment of Reinforcement Learning for Traffic Signal Control. In
M. A. Wani, IEEE ICMLA, & Institute of Electrical and Electronics Engineers
(Eds.), 20th IEEE International Conference on Machine Learning and Applications
(ICMLA). IEEE. https://doi.org/10.1109/ICMLA52953.2021.00085
bjps: 'Müller A et al. (2021) Towards Real-World Deployment of
Reinforcement Learning for Traffic Signal Control, Wani MA, IEEE ICMLA,
and Institute of Electrical and Electronics Engineers (eds). Piscataway, NJ:
IEEE.'
chicago: 'Müller, Arthur, Vishal Rangras, Georg Schnittker, Michael Waldmann, Maxim
Friesen, Tobias Ferfers, Lukas Schreckenberg, Florian Hufen, Jürgen Jasperneite,
and Marco Wiering. Towards Real-World Deployment of Reinforcement Learning
for Traffic Signal Control. Edited by M. Arif Wani, IEEE ICMLA, and Institute
of Electrical and Electronics Engineers. 20th IEEE International Conference
on Machine Learning and Applications (ICMLA). Piscataway, NJ: IEEE, 2021.
https://doi.org/10.1109/ICMLA52953.2021.00085.'
chicago-de: 'Müller, Arthur, Vishal Rangras, Georg Schnittker, Michael Waldmann,
Maxim Friesen, Tobias Ferfers, Lukas Schreckenberg, Florian Hufen, Jürgen Jasperneite
und Marco Wiering. 2021. Towards Real-World Deployment of Reinforcement Learning
for Traffic Signal Control. Hg. von M. Arif Wani, IEEE ICMLA, und Institute
of Electrical and Electronics Engineers. 20th IEEE International Conference
on Machine Learning and Applications (ICMLA). Piscataway, NJ: IEEE. doi:10.1109/ICMLA52953.2021.00085,
.'
din1505-2-1: 'Müller,
Arthur ; Rangras, Vishal
; Schnittker, Georg ; Waldmann,
Michael ; Friesen, Maxim
; Ferfers, Tobias ; Schreckenberg,
Lukas ; Hufen, Florian ;
u. a. ; Wani, M. A. ; IEEE ICMLA ;
Institute of Electrical and Electronics Engineers (Hrsg.): Towards Real-World
Deployment of Reinforcement Learning for Traffic Signal Control. Piscataway,
NJ : IEEE, 2021'
havard: A. Müller, V. Rangras, G. Schnittker, M. Waldmann, M. Friesen, T. Ferfers,
L. Schreckenberg, F. Hufen, J. Jasperneite, M. Wiering, Towards Real-World Deployment
of Reinforcement Learning for Traffic Signal Control, IEEE, Piscataway, NJ, 2021.
ieee: 'A. Müller et al., Towards Real-World Deployment of Reinforcement
Learning for Traffic Signal Control. Piscataway, NJ: IEEE, 2021. doi: 10.1109/ICMLA52953.2021.00085.'
mla: Müller, Arthur, et al. “Towards Real-World Deployment of Reinforcement Learning
for Traffic Signal Control.” 20th IEEE International Conference on Machine
Learning and Applications (ICMLA), edited by M. Arif Wani et al., IEEE, 2021,
https://doi.org/10.1109/ICMLA52953.2021.00085.
short: A. Müller, V. Rangras, G. Schnittker, M. Waldmann, M. Friesen, T. Ferfers,
L. Schreckenberg, F. Hufen, J. Jasperneite, M. Wiering, Towards Real-World Deployment
of Reinforcement Learning for Traffic Signal Control, IEEE, Piscataway, NJ, 2021.
ufg: 'Müller, Arthur u. a.: Towards Real-World Deployment of Reinforcement
Learning for Traffic Signal Control, hg. von Wani, M. Arif/ IEEE ICMLA, Institute
of Electrical and Electronics Engineers, Piscataway, NJ 2021.'
van: 'Müller A, Rangras V, Schnittker G, Waldmann M, Friesen M, Ferfers T, et al.
Towards Real-World Deployment of Reinforcement Learning for Traffic Signal Control.
Wani MA, IEEE ICMLA, Institute of Electrical and Electronics Engineers, editors.
20th IEEE International Conference on Machine Learning and Applications (ICMLA).
Piscataway, NJ: IEEE; 2021.'
conference:
end_date: 2021-12-16
location: 'Pasadena, CA, USA '
name: 20th IEEE International Conference on Machine Learning and Applications (ICMLA)
start_date: 2021-12-13
corporate_editor:
- ' IEEE ICMLA'
- ' Institute of Electrical and Electronics Engineers'
date_created: 2024-07-30T05:54:40Z
date_updated: 2024-07-30T07:45:47Z
department:
- _id: DEP5000
- _id: DEP5019
- _id: DEP5020
- _id: DEP6020
doi: 10.1109/ICMLA52953.2021.00085
editor:
- first_name: M. Arif
full_name: Wani, M. Arif
last_name: Wani
external_id:
arxiv:
- arXiv:2103.16223
keyword:
- deep reinforcement learning
- traffic signal control
- intelligent transportation system
- traffic simulation
language:
- iso: eng
place: Piscataway, NJ
publication: 20th IEEE International Conference on Machine Learning and Applications
(ICMLA)
publication_identifier:
eisbn:
- '9781665443371'
publication_status: published
publisher: IEEE
status: public
title: Towards Real-World Deployment of Reinforcement Learning for Traffic Signal
Control
type: conference_editor_article
user_id: '83781'
year: '2021'
...
---
_id: '7035'
abstract:
- lang: eng
text: Technological progress, upcoming cyber-physical systems, and limited resources
confront small and medium-sized enterprises (SMEs) with the challenge of complexity
management in product development projects spanning over the entire product lifecycle.
SMEs require a solution for documenting and analyzing the functional relationships
between multiple domains such as products, software, and processes. The German
research project FuPEP “Funktionsorientiertes Komplexitätsmanagement in allen
Phasen der Produktentstehung” aims to address this issue by developing an assistance
system that supports product developers by visualizing functional relationships.
This paper presents the methodology and results of the assistance system’s requirements
elicitation with two SMEs. Conducting the elicitation during a global pandemic,
we discuss its application using specific techniques in light of COVID-19. We
model problems and their effects regarding complexity management in product development
in a system dynamics model. The most important requirements and use cases elicited
are presented, and the requirements elicitation methodology and results are discussed.
Additionally, we present a multilayer software architecture design of the assistance
system. Our case study suggests a relationship between fear of a missing project
focus among project participants and the restriction of requirements elicitation
techniques to those possible via web conferencing tools.
article_number: '149'
author:
- first_name: Jan-Phillip
full_name: Herrmann, Jan-Phillip
id: '75846'
last_name: Herrmann
- first_name: Sebastian
full_name: Imort, Sebastian
id: '74291'
last_name: Imort
- first_name: Christoph
full_name: Trojanowski, Christoph
last_name: Trojanowski
- first_name: Andreas
full_name: Deuter, Andreas
id: '62088'
last_name: Deuter
orcid: 0000-0002-6529-6215
citation:
ama: 'Herrmann JP, Imort S, Trojanowski C, Deuter A. Requirements Elicitation for
an Assistance System for Complexity Management in Product Development of SMEs
during COVID-19: A Case Study. Computers. 2021;10(11). doi:10.3390/computers10110149'
apa: 'Herrmann, J.-P., Imort, S., Trojanowski, C., & Deuter, A. (2021). Requirements
Elicitation for an Assistance System for Complexity Management in Product Development
of SMEs during COVID-19: A Case Study. Computers, 10(11), Article
149. https://doi.org/10.3390/computers10110149'
bjps: 'Herrmann J-P et al. (2021) Requirements Elicitation for an
Assistance System for Complexity Management in Product Development of SMEs during
COVID-19: A Case Study. Computers 10.'
chicago: 'Herrmann, Jan-Phillip, Sebastian Imort, Christoph Trojanowski, and Andreas
Deuter. “Requirements Elicitation for an Assistance System for Complexity Management
in Product Development of SMEs during COVID-19: A Case Study.” Computers
10, no. 11 (2021). https://doi.org/10.3390/computers10110149.'
chicago-de: 'Herrmann, Jan-Phillip, Sebastian Imort, Christoph Trojanowski und Andreas
Deuter. 2021. Requirements Elicitation for an Assistance System for Complexity
Management in Product Development of SMEs during COVID-19: A Case Study. Computers
10, Nr. 11. doi:10.3390/computers10110149,
.'
din1505-2-1: 'Herrmann, Jan-Phillip
; Imort, Sebastian ; Trojanowski,
Christoph ; Deuter, Andreas:
Requirements Elicitation for an Assistance System for Complexity Management in
Product Development of SMEs during COVID-19: A Case Study. In: Computers
Bd. 10 (2021), Nr. 11'
havard: 'J.-P. Herrmann, S. Imort, C. Trojanowski, A. Deuter, Requirements Elicitation
for an Assistance System for Complexity Management in Product Development of SMEs
during COVID-19: A Case Study, Computers. 10 (2021).'
ieee: 'J.-P. Herrmann, S. Imort, C. Trojanowski, and A. Deuter, “Requirements Elicitation
for an Assistance System for Complexity Management in Product Development of SMEs
during COVID-19: A Case Study,” Computers, vol. 10, no. 11, Art. no. 149,
2021, doi: 10.3390/computers10110149.'
mla: 'Herrmann, Jan-Phillip, et al. “Requirements Elicitation for an Assistance
System for Complexity Management in Product Development of SMEs during COVID-19:
A Case Study.” Computers, vol. 10, no. 11, 149, 2021, https://doi.org/10.3390/computers10110149.'
short: J.-P. Herrmann, S. Imort, C. Trojanowski, A. Deuter, Computers 10 (2021).
ufg: 'Herrmann, Jan-Phillip u. a.: Requirements Elicitation for an Assistance
System for Complexity Management in Product Development of SMEs during COVID-19:
A Case Study, in: Computers 10 (2021), H. 11.'
van: 'Herrmann JP, Imort S, Trojanowski C, Deuter A. Requirements Elicitation for
an Assistance System for Complexity Management in Product Development of SMEs
during COVID-19: A Case Study. Computers. 2021;10(11).'
date_created: 2022-02-08T14:48:19Z
date_updated: 2025-06-26T13:37:00Z
department:
- _id: DEP7020
- _id: DEP7022
- _id: DEP1306
doi: 10.3390/computers10110149
external_id:
isi:
- '000727073200001'
intvolume: ' 10'
isi: '1'
issue: '11'
keyword:
- complexity management
- assistance system
- product development
- systems engineering
- design structure matrix
- asset administration shell
language:
- iso: eng
publication: Computers
publication_identifier:
eissn:
- 2073-431X
publication_status: published
status: public
title: 'Requirements Elicitation for an Assistance System for Complexity Management
in Product Development of SMEs during COVID-19: A Case Study'
type: journal_article
user_id: '83781'
volume: 10
year: '2021'
...
---
_id: '4897'
abstract:
- lang: eng
text: Assistance is becoming increasingly relevant in carrying out industrial work
in the context of cyber-physical production systems (CPPSs) and Industry 4.0.
While assistance in a single task via a single interaction modality has been explored
previously, crossdevice interaction could improve the quality of assistance, especially
given the concurrent and distributed nature of work in CPPSs. In this paper, we
present the theoretical foundations and implementation of MiWSICx (Middleware
for Work Support in Industrial Contexts), a middleware that showcases how multiple
interactive computing devices such as tablets, smartphones, augmented/virtual
reality glasses, and wearables could be combined to provide crossdevice industrial
assistance. Based on activity theory, MiWSICx models human work as activities
combining multiple users, artifacts, and cyber-physical objects. MiWSICx is developed
using the actor model for deployment on a variety of hardware alongside a CPPS
to provide multiuser, crossdevice, multiactivity assistance.
author:
- first_name: Hitesh
full_name: Dhiman, Hitesh
id: '71767'
last_name: Dhiman
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: Dhiman H, Röcker C. Middleware for providing activity-driven assistance in
cyber-physical production systems. Journal of Computational Design and Engineering.
2021;8(1):428-451. doi:10.1093/jcde/qwaa088
apa: Dhiman, H., & Röcker, C. (2021). Middleware for providing activity-driven
assistance in cyber-physical production systems. Journal of Computational Design
and Engineering, 8(1), 428–451. https://doi.org/10.1093/jcde/qwaa088
bjps: Dhiman H and Röcker C (2021) Middleware for Providing Activity-Driven
Assistance in Cyber-Physical Production Systems. Journal of Computational Design
and Engineering 8, 428–451.
chicago: 'Dhiman, Hitesh, and Carsten Röcker. “Middleware for Providing Activity-Driven
Assistance in Cyber-Physical Production Systems.” Journal of Computational
Design and Engineering 8, no. 1 (2021): 428–51. https://doi.org/10.1093/jcde/qwaa088.'
chicago-de: 'Dhiman, Hitesh und Carsten Röcker. 2021. Middleware for providing activity-driven
assistance in cyber-physical production systems. Journal of Computational Design
and Engineering 8, Nr. 1: 428–451. doi:10.1093/jcde/qwaa088,
.'
din1505-2-1: 'Dhiman, Hitesh ; Röcker, Carsten: Middleware for providing
activity-driven assistance in cyber-physical production systems. In: Journal
of Computational Design and Engineering Bd. 8. Oxford, Oxford University Press
(2021), Nr. 1, S. 428–451'
havard: H. Dhiman, C. Röcker, Middleware for providing activity-driven assistance
in cyber-physical production systems, Journal of Computational Design and Engineering.
8 (2021) 428–451.
ieee: H. Dhiman and C. Röcker, “Middleware for providing activity-driven assistance
in cyber-physical production systems,” Journal of Computational Design and
Engineering, vol. 8, no. 1, pp. 428–451, 2021.
mla: Dhiman, Hitesh, and Carsten Röcker. “Middleware for Providing Activity-Driven
Assistance in Cyber-Physical Production Systems.” Journal of Computational
Design and Engineering, vol. 8, no. 1, Oxford University Press, 2021, pp.
428–51, doi:10.1093/jcde/qwaa088.
short: H. Dhiman, C. Röcker, Journal of Computational Design and Engineering 8 (2021)
428–451.
ufg: 'Dhiman, Hitesh/Röcker, Carsten (2021): Middleware for providing activity-driven
assistance in cyber-physical production systems, in: Journal of Computational
Design and Engineering 8 (1), S. 428–451.'
van: Dhiman H, Röcker C. Middleware for providing activity-driven assistance in
cyber-physical production systems. Journal of Computational Design and Engineering.
2021;8(1):428–51.
date_created: 2021-02-04T15:20:11Z
date_updated: 2023-03-15T13:49:56Z
department:
- _id: DEP5023
- _id: DEP5027
doi: 10.1093/jcde/qwaa088
intvolume: ' 8'
issue: '1'
keyword:
- human–technology interaction
- human–computer interaction
- crossdevice interaction
- cyber-physical systems
- assistance
- smart factory
- middleware
- actor model
- information system design
- industry 4.0
language:
- iso: eng
page: 428-451
place: Oxford
publication: Journal of Computational Design and Engineering
publication_identifier:
eissn:
- '2288-4300 '
publication_status: published
publisher: Oxford University Press
status: public
title: Middleware for providing activity-driven assistance in cyber-physical production
systems
type: journal_article
user_id: '15514'
volume: 8
year: 2021
...
---
_id: '8326'
abstract:
- lang: eng
text: Gamification is a widely used way of increasing motivation and fun in the
use of systems that are not games. By outlining critical aspects in developing
gamified systems, we adapted the modelling technique event storming in the context
of a special case study where a gamified, collaborative platform was developed.
For this purpose, the relationship of event storming and spatial hypertext has
been worked out and an event storming extension has been introduced based on spatial
hypertext principles. With respect to the case study and further insights in the
academic context, we discuss how the emerging nature of event storming could benefit
from a specialized spatial hypertext tool.
author:
- first_name: Valentin
full_name: Grimm, Valentin
id: '74000'
last_name: Grimm
- first_name: Jessica
full_name: Rubart, Jessica
id: '45672'
last_name: Rubart
citation:
ama: Grimm V, Rubart J. Modelling Gamified Systems with Event Storming Augmented
by Spatial Hypertext. (Rubart J, Atzenbeck C, eds.). ACM Press; 2021:3-10.
doi:10.1145/3468143.3483927
apa: Grimm, V., & Rubart, J. (2021). Modelling Gamified Systems with Event Storming
Augmented by Spatial Hypertext. In J. Rubart & C. Atzenbeck (Eds.), Proceedings
of the 4th international Workshop on Human Factors in Hypertext (HUMAN’21)
(pp. 3–10). ACM Press. https://doi.org/10.1145/3468143.3483927
bjps: Grimm V and Rubart J (2021) Modelling Gamified Systems with Event
Storming Augmented by Spatial Hypertext, Rubart J and Atzenbeck C (eds). ACM
Press.
chicago: Grimm, Valentin, and Jessica Rubart. Modelling Gamified Systems with
Event Storming Augmented by Spatial Hypertext. Edited by Jessica Rubart and
Claus Atzenbeck. Proceedings of the 4th International Workshop on Human Factors
in Hypertext (HUMAN’21). ACM Press, 2021. https://doi.org/10.1145/3468143.3483927.
chicago-de: Grimm, Valentin und Jessica Rubart. 2021. Modelling Gamified Systems
with Event Storming Augmented by Spatial Hypertext. Hg. von Jessica Rubart
und Claus Atzenbeck. Proceedings of the 4th international Workshop on Human
Factors in Hypertext (HUMAN’21). ACM Press. doi:10.1145/3468143.3483927,
.
din1505-2-1: 'Grimm, Valentin ; Rubart, Jessica ; Rubart,
J. ; Atzenbeck, C. (Hrsg.):
Modelling Gamified Systems with Event Storming Augmented by Spatial Hypertext :
ACM Press, 2021'
havard: V. Grimm, J. Rubart, Modelling Gamified Systems with Event Storming Augmented
by Spatial Hypertext, ACM Press, 2021.
ieee: 'V. Grimm and J. Rubart, Modelling Gamified Systems with Event Storming
Augmented by Spatial Hypertext. ACM Press, 2021, pp. 3–10. doi: 10.1145/3468143.3483927.'
mla: Grimm, Valentin, and Jessica Rubart. “Modelling Gamified Systems with Event
Storming Augmented by Spatial Hypertext.” Proceedings of the 4th International
Workshop on Human Factors in Hypertext (HUMAN’21), edited by Jessica Rubart
and Claus Atzenbeck, ACM Press, 2021, pp. 3–10, https://doi.org/10.1145/3468143.3483927.
short: V. Grimm, J. Rubart, Modelling Gamified Systems with Event Storming Augmented
by Spatial Hypertext, ACM Press, 2021.
ufg: 'Grimm, Valentin/Rubart, Jessica: Modelling Gamified Systems with Event
Storming Augmented by Spatial Hypertext, hg. von Rubart, Jessica/Atzenbeck, Claus,
o. O. 2021.'
van: Grimm V, Rubart J. Modelling Gamified Systems with Event Storming Augmented
by Spatial Hypertext. Rubart J, Atzenbeck C, editors. Proceedings of the 4th international
Workshop on Human Factors in Hypertext (HUMAN’21). ACM Press; 2021.
conference:
end_date: 2021-09-02
location: Virtual Event, Ireland
name: 4th Workshop on Human Factors in Hypertext (HUMAN)
start_date: 2021-08-30
date_created: 2022-05-31T09:21:00Z
date_updated: 2025-06-26T13:23:09Z
department:
- _id: DEP8008
- _id: DEP8000
doi: 10.1145/3468143.3483927
editor:
- first_name: Jessica
full_name: Rubart, Jessica
id: '45672'
last_name: Rubart
- first_name: Claus
full_name: Atzenbeck, Claus
last_name: Atzenbeck
external_id:
isi:
- '001345025900002'
isi: '1'
keyword:
- Spatial Hypertext
- Gamification
- Event Storming
- System Modeling
- Collaborative Modeling
- Gamified System
language:
- iso: eng
main_file_link:
- url: https://dl.acm.org/doi/10.1145/3468143.3483927
page: 3-10
publication: Proceedings of the 4th international Workshop on Human Factors in Hypertext
(HUMAN’21)
publication_identifier:
isbn:
- 978-1-4503-8560-2
publication_status: published
publisher: ACM Press
quality_controlled: '1'
status: public
title: Modelling Gamified Systems with Event Storming Augmented by Spatial Hypertext
type: conference_editor_article
user_id: '83781'
year: '2021'
...
---
_id: '8380'
abstract:
- lang: eng
text: Currently, numerous single-track railway lines are disused due to economic
reasons. However, they could be reactivated for a bidirectional on-demand service
traffic by small vehicles that use only one rail. MonoCabs are such small cabin-like
vehicles, stabilized by a system of control moment gyroscopes and a moveable mass.
They could make an important contribution to improve the mobility offer especially
in rural areas. This paper is focused on the vertical stabilization system of
the MonoCab. This system is discussed based on a physical three body model which
describes the rolling motion of the vehicle, the lateral motion of the mass and
the precession motion of the gyroscope. The model is utilized for a cascaded control
concept adjusting the vehicle’s roll angle and gyroscope’s gimbal angle. The proposed
stabilization concept is capable of compensating both high dynamic disturbances
and stationary disturbances (e. g. unbalanced loads and steady wind flows). The
concept is analyzed by simulations and experimental investigations utilizing a
small scaled test rig and a rapid control prototyping system. Beside transient
command responses also the frequency response of the system is experimentally
evaluated and used for a validation of the model and theoretical findings.
author:
- first_name: Martin
full_name: Griese, Martin
id: '52308'
last_name: Griese
- first_name: Fabian
full_name: Kottmeier, Fabian
id: '55385'
last_name: Kottmeier
- first_name: Thomas
full_name: Schulte, Thomas
id: '46242'
last_name: Schulte
citation:
ama: Griese M, Kottmeier F, Schulte T. Vertical Control of a Self-Stabilizing
Monorail Vehicle. IEEE; 2021:1-6. doi:10.1109/IECON48115.2021.9589726
apa: 'Griese, M., Kottmeier, F., & Schulte, T. (2021). Vertical control of
a self-stabilizing monorail vehicle. IECON 2021 – 47th Annual Conference
of the IEEE Industrial Electronics Society (pp. 1–6). Toronto, ON, Canada
: IEEE. https://doi.org/10.1109/IECON48115.2021.9589726'
bjps: Griese M, Kottmeier F and Schulte T (2021) Vertical Control of a
Self-Stabilizing Monorail Vehicle. IEEE.
chicago: Griese, Martin, Fabian Kottmeier, and Thomas Schulte. Vertical Control
of a Self-Stabilizing Monorail Vehicle. IECON 2021 – 47th Annual Conference
of the IEEE Industrial Electronics Society. IECON 2021 – 47th Annual Conference
of the IEEE Industrial Electronics Society. IEEE, 2021. https://doi.org/10.1109/IECON48115.2021.9589726.
chicago-de: Griese, Martin, Fabian Kottmeier und Thomas Schulte. 2021. Vertical
control of a self-stabilizing monorail vehicle. IECON 2021 – 47th Annual
Conference of the IEEE Industrial Electronics Society. IECON 2021 – 47th Annual
Conference of the IEEE Industrial Electronics Society. IEEE. doi:10.1109/IECON48115.2021.9589726,
.
din1505-2-1: 'Griese, Martin ; Kottmeier, Fabian ; Schulte,
Thomas: Vertical control of a self-stabilizing monorail vehicle,
IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society :
IEEE, 2021'
havard: M. Griese, F. Kottmeier, T. Schulte, Vertical control of a self-stabilizing
monorail vehicle, IEEE, 2021.
ieee: M. Griese, F. Kottmeier, and T. Schulte, Vertical control of a self-stabilizing
monorail vehicle. IEEE, 2021, pp. 1–6.
mla: Griese, Martin, et al. “Vertical Control of a Self-Stabilizing Monorail Vehicle.”
IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society,
IEEE, 2021, pp. 1–6, doi:10.1109/IECON48115.2021.9589726.
short: M. Griese, F. Kottmeier, T. Schulte, Vertical Control of a Self-Stabilizing
Monorail Vehicle, IEEE, 2021.
ufg: 'Griese, Martin et. al. (2021): Vertical control of a self-stabilizing
monorail vehicle (=IECON 2021 – 47th Annual Conference of the IEEE Industrial
Electronics Society).'
van: Griese M, Kottmeier F, Schulte T. Vertical control of a self-stabilizing monorail
vehicle. IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics
Society. IEEE; 2021. (IECON 2021 – 47th Annual Conference of the IEEE Industrial
Electronics Society).
conference:
end_date: 2021-10-16
location: 'Toronto, ON, Canada '
name: IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society
start_date: 2021-10-13
date_created: 2022-06-22T08:45:19Z
date_updated: 2023-03-15T13:50:15Z
department:
- _id: DEP6020
- _id: DEP5022
doi: 10.1109/IECON48115.2021.9589726
keyword:
- Vehicle dynamics
- Control moment gyroscope
- Control system analysis
- Roll stabilization
- Monorail vehicles
language:
- iso: eng
page: pp. 1-6
publication: IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics
Society
publication_identifier:
isbn:
- 978-1-6654-3554-3
issn:
- '2577-1647 '
publication_status: published
publisher: IEEE
series_title: IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics
Society
status: public
title: Vertical control of a self-stabilizing monorail vehicle
type: conference_editor_article
user_id: '56955'
year: 2021
...
---
_id: '8385'
abstract:
- lang: eng
text: Currently, numerous single-track railway lines are disused due to economic
reasons. However, they could be reactivated for a bidirectional on-demand service
traffic by small vehicles that use only one rail. MonoCabs are such small cabin-like
vehicles, stabilized by a system of control moment gyroscopes and a moveable mass.
They could make an important contribution to improve the mobility offer especially
in rural areas. This paper focuses on the analytical modeling and vertical stabilization
system of the MonoCab. A nonlinear dynamic model is obtained using the Lagrangian
method and subsequently linearized about its equilibrium point. Which is used
for the design of the cascade control system. The dynamic analysis of the system
is accomplished by comparing between analytically derived model in simulink environment
and same structured model in simscape multibody. This system is discussed based
on a physical three body model which describes the rolling motion of the vehicle,
the lateral motion of the mass and the precession motion of the gyroscope. The
model is utilized for a cascaded control concept adjusting the vehicle’s roll
angle and gyroscope’s precession angle. The proposed stabilization concept is
capable of compensating both high dynamic disturbances and stationary disturbances
(e. g. unbalanced loads and steady wind flows). The concept is analyzed by simulations
and experimental investigations. Beside transient command responses also the frequency
response of the system is experimentally evaluated and used for a validation of
the model and theoretical findings. For the experimental validation, a small scaled
test rig is used which consists of mechanical frames and flywheels, inverter-fed
drives, rotary encoders, an inertial measurement unit (IMU) and a rapid control
prototyping system.
author:
- first_name: Martin
full_name: Griese, Martin
id: '52308'
last_name: Griese
- first_name: Seyed Davood
full_name: Mousavi, Seyed Davood
id: '79148'
last_name: Mousavi
- first_name: Thomas
full_name: Schulte, Thomas
id: '46242'
last_name: Schulte
citation:
ama: Griese M, Mousavi SD, Schulte T. Modeling the Vertical Dynamics of a Self-Stabilizing
Monorail Vehicle. IEEE; 2021:205-210. doi:10.1109/ICCMA54375.2021.9646219
apa: 'Griese, M., Mousavi, S. D., & Schulte, T. (2021). Modeling the Vertical
Dynamics of a Self-stabilizing Monorail Vehicle. 2021 9th International
Conference on Control, Mechatronics and Automation (ICCMA) (pp. 205–210).
Belval, Luxembourg : IEEE. https://doi.org/10.1109/ICCMA54375.2021.9646219'
bjps: Griese M, Mousavi SD and Schulte T (2021) Modeling the Vertical
Dynamics of a Self-Stabilizing Monorail Vehicle. IEEE.
chicago: Griese, Martin, Seyed Davood Mousavi, and Thomas Schulte. Modeling the
Vertical Dynamics of a Self-Stabilizing Monorail Vehicle. 2021 9th International
Conference on Control, Mechatronics and Automation (ICCMA). IEEE, 2021. https://doi.org/10.1109/ICCMA54375.2021.9646219.
chicago-de: Griese, Martin, Seyed Davood Mousavi und Thomas Schulte. 2021. Modeling
the Vertical Dynamics of a Self-stabilizing Monorail Vehicle. 2021 9th
International Conference on Control, Mechatronics and Automation (ICCMA).
IEEE. doi:10.1109/ICCMA54375.2021.9646219,
.
din1505-2-1: 'Griese, Martin ; Mousavi, Seyed Davood ; Schulte,
Thomas: Modeling the Vertical Dynamics of a Self-stabilizing Monorail
Vehicle : IEEE, 2021'
havard: M. Griese, S.D. Mousavi, T. Schulte, Modeling the Vertical Dynamics of a
Self-stabilizing Monorail Vehicle, IEEE, 2021.
ieee: M. Griese, S. D. Mousavi, and T. Schulte, Modeling the Vertical Dynamics
of a Self-stabilizing Monorail Vehicle. IEEE, 2021, pp. 205–210.
mla: Griese, Martin, et al. “Modeling the Vertical Dynamics of a Self-Stabilizing
Monorail Vehicle.” 2021 9th International Conference on Control, Mechatronics
and Automation (ICCMA), IEEE, 2021, pp. 205–10, doi:10.1109/ICCMA54375.2021.9646219.
short: M. Griese, S.D. Mousavi, T. Schulte, Modeling the Vertical Dynamics of a
Self-Stabilizing Monorail Vehicle, IEEE, 2021.
ufg: 'Griese, Martin et. al. (2021): Modeling the Vertical Dynamics of a
Self-stabilizing Monorail Vehicle.'
van: Griese M, Mousavi SD, Schulte T. Modeling the Vertical Dynamics of a Self-stabilizing
Monorail Vehicle. 2021 9th International Conference on Control, Mechatronics and
Automation (ICCMA). IEEE; 2021.
conference:
end_date: 2021-11-14
location: 'Belval, Luxembourg '
name: 2021 9th International Conference on Control, Mechatronics and Automation
(ICCMA)
start_date: 2021-11-11
date_created: 2022-06-22T14:22:07Z
date_updated: 2023-03-15T13:50:15Z
department:
- _id: DEP6020
- _id: DEP5022
doi: 10.1109/ICCMA54375.2021.9646219
keyword:
- Vehicle dynamics
- Control moment gyroscope
- Control system analysis
- Roll stabilization
- Monorail vehicles
language:
- iso: eng
page: 205-210
publication: 2021 9th International Conference on Control, Mechatronics and Automation
(ICCMA)
publication_identifier:
eisbn:
- 978-1-6654-1073-1
publication_status: published
publisher: IEEE
status: public
title: Modeling the Vertical Dynamics of a Self-stabilizing Monorail Vehicle
type: conference_editor_article
user_id: '56955'
year: 2021
...
---
_id: '4094'
abstract:
- lang: eng
text: Projection-based assitive systems that guide users through assembly work are
on their way to industrial application. Previous research work investigated how
people can be supported with such systems. However, there has been little work
on the question on how to generate and author sequential instructions for assitive
systems. In this paper, we present a new concept and a prototypical implementation
of an assitive system that can be taught by demonstrating an assembly process.
By using a combination of RGB and depth cameras, we can generate an assembly instruction
of Lego Duplo bricks based on the demonstration of a user. This generated manual
can later on be used for assisting other users in the assembly process. By our
prototype system, we show the technological feasibility of assistive systems that
can learn from users.
author:
- first_name: Sebastian
full_name: Büttner, Sebastian
id: '61868'
last_name: Büttner
- first_name: Andreas
full_name: Peda, Andreas
id: '51144'
last_name: Peda
- first_name: Mario
full_name: Heinz, Mario
id: '68913'
last_name: Heinz
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Büttner S, Peda A, Heinz M, Röcker C. Teaching by Demonstrating – How Smart
Assistive Systems Can Learn from Users. In: 22nd International Conference on
Human-Computer Interaction. Vol 12203. Lecture Notes in Computer Science.
Springer; 2020:153-163. doi:https://doi.org/10.1007/978-3-030-50344-4_12'
apa: Büttner, S., Peda, A., Heinz, M., & Röcker, C. (2020). Teaching by Demonstrating
– How Smart Assistive Systems Can Learn from Users. 22nd International Conference
on Human-Computer Interaction, 12203, 153–163. https://doi.org/10.1007/978-3-030-50344-4_12
bjps: 'Büttner S et al. (2020) Teaching by Demonstrating – How Smart
Assistive Systems Can Learn from Users. 22nd International Conference on Human-Computer
Interaction, vol. 12203. Berlin: Springer, pp. 153–163.'
chicago: 'Büttner, Sebastian, Andreas Peda, Mario Heinz, and Carsten Röcker. “Teaching
by Demonstrating – How Smart Assistive Systems Can Learn from Users.” In 22nd
International Conference on Human-Computer Interaction, 12203:153–63. Lecture
Notes in Computer Science. Berlin: Springer, 2020. https://doi.org/10.1007/978-3-030-50344-4_12.'
chicago-de: 'Büttner, Sebastian, Andreas Peda, Mario Heinz und Carsten Röcker. 2020.
Teaching by Demonstrating – How Smart Assistive Systems Can Learn from Users.
In: 22nd International Conference on Human-Computer Interaction, 12203:153–163.
Lecture Notes in Computer Science. Berlin: Springer. doi:https://doi.org/10.1007/978-3-030-50344-4_12,
.'
din1505-2-1: 'Büttner, Sebastian ;
Peda, Andreas ; Heinz,
Mario ; Röcker, Carsten:
Teaching by Demonstrating – How Smart Assistive Systems Can Learn from Users.
In: 22nd International Conference on Human-Computer Interaction, Lecture
Notes in Computer Science. Bd. 12203. Berlin : Springer, 2020, S. 153–163'
havard: 'S. Büttner, A. Peda, M. Heinz, C. Röcker, Teaching by Demonstrating – How
Smart Assistive Systems Can Learn from Users, in: 22nd International Conference
on Human-Computer Interaction, Springer, Berlin, 2020: pp. 153–163.'
ieee: 'S. Büttner, A. Peda, M. Heinz, and C. Röcker, “Teaching by Demonstrating
– How Smart Assistive Systems Can Learn from Users,” in 22nd International
Conference on Human-Computer Interaction, Copenhagen, Denmark, 2020, vol.
12203, pp. 153–163. doi: https://doi.org/10.1007/978-3-030-50344-4_12.'
mla: Büttner, Sebastian, et al. “Teaching by Demonstrating – How Smart Assistive
Systems Can Learn from Users.” 22nd International Conference on Human-Computer
Interaction, vol. 12203, Springer, 2020, pp. 153–63, https://doi.org/10.1007/978-3-030-50344-4_12.
short: 'S. Büttner, A. Peda, M. Heinz, C. Röcker, in: 22nd International Conference
on Human-Computer Interaction, Springer, Berlin, 2020, pp. 153–163.'
ufg: 'Büttner, Sebastian u. a.: Teaching by Demonstrating – How Smart Assistive
Systems Can Learn from Users, in: o. Hg.: 22nd International Conference on Human-Computer
Interaction, Bd. 12203, Berlin 2020 (Lecture Notes in Computer Science), S. 153–163.'
van: 'Büttner S, Peda A, Heinz M, Röcker C. Teaching by Demonstrating – How Smart
Assistive Systems Can Learn from Users. In: 22nd International Conference on Human-Computer
Interaction. Berlin: Springer; 2020. p. 153–63. (Lecture Notes in Computer Science;
vol. 12203).'
conference:
end_date: 2020-07-24
location: Copenhagen, Denmark
name: 22nd International Conference on Human-Computer Interaction
start_date: 2020-07-19
date_created: 2020-11-26T14:10:00Z
date_updated: 2025-06-26T08:59:53Z
department:
- _id: DEP5023
doi: https://doi.org/10.1007/978-3-030-50344-4_12
intvolume: ' 12203'
keyword:
- Assitive system
- Authoring
- Instruction generation
- Computer vision
- Teaching by demonstration
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://link.springer.com/chapter/10.1007/978-3-030-50344-4_12
oa: '1'
page: 153-163
place: Berlin
publication: 22nd International Conference on Human-Computer Interaction
publication_identifier:
eisbn:
- 978-3-030-50344-4
isbn:
- 978-3-030-50343-7
publication_status: published
publisher: Springer
series_title: Lecture Notes in Computer Science
status: public
title: Teaching by Demonstrating – How Smart Assistive Systems Can Learn from Users
type: conference
user_id: '83781'
volume: 12203
year: '2020'
...
---
_id: '4100'
author:
- first_name: Tobias
full_name: Schmohl, Tobias
id: '71782'
last_name: Schmohl
orcid: https://orcid.org/0000-0002-7043-5582
- first_name: Susanne
full_name: Schwickert, Susanne
id: '27269'
last_name: Schwickert
- first_name: Oliver
full_name: Glahn, Oliver
id: '76018'
last_name: Glahn
citation:
ama: 'Schmohl T, Schwickert S, Glahn O. Conceptual Design of an AI-Based Learning
Assistant . Bologna: Libreriauniversitaria.it; 2020:309-313. doi:10.26352/E618_2384-9509'
apa: 'Schmohl, T., Schwickert, S., & Glahn, O. (2020). Conceptual Design
of an AI-Based Learning Assistant . The Future of Education (pp. 309–313).
Bologna: Libreriauniversitaria.it. https://doi.org/10.26352/E618_2384-9509'
bjps: 'Schmohl T, Schwickert S and Glahn O (2020) Conceptual Design of
an AI-Based Learning Assistant . Bologna: Libreriauniversitaria.it.'
chicago: 'Schmohl, Tobias, Susanne Schwickert, and Oliver Glahn. Conceptual Design
of an AI-Based Learning Assistant . The Future of Education. Bologna:
Libreriauniversitaria.it, 2020. https://doi.org/10.26352/E618_2384-9509.'
chicago-de: 'Schmohl, Tobias, Susanne Schwickert und Oliver Glahn. 2020. Conceptual
Design of an AI-Based Learning Assistant . The Future of Education.
Bologna: Libreriauniversitaria.it. doi:10.26352/E618_2384-9509,
.'
din1505-2-1: 'Schmohl, Tobias ; Schwickert, Susanne ; Glahn,
Oliver: Conceptual Design of an AI-Based Learning Assistant . Bologna :
Libreriauniversitaria.it, 2020'
havard: T. Schmohl, S. Schwickert, O. Glahn, Conceptual Design of an AI-Based Learning
Assistant , Libreriauniversitaria.it, Bologna, 2020.
ieee: 'T. Schmohl, S. Schwickert, and O. Glahn, Conceptual Design of an AI-Based
Learning Assistant . Bologna: Libreriauniversitaria.it, 2020, pp. 309–313.'
mla: Schmohl, Tobias, et al. “Conceptual Design of an AI-Based Learning Assistant
.” The Future of Education, Libreriauniversitaria.it, 2020, pp. 309–13,
doi:10.26352/E618_2384-9509.
short: T. Schmohl, S. Schwickert, O. Glahn, Conceptual Design of an AI-Based Learning
Assistant , Libreriauniversitaria.it, Bologna, 2020.
ufg: 'Schmohl, Tobias et. al. (2020): Conceptual Design of an AI-Based Learning
Assistant , Bologna.'
van: 'Schmohl T, Schwickert S, Glahn O. Conceptual Design of an AI-Based Learning
Assistant . The Future of Education. Bologna: Libreriauniversitaria.it; 2020.'
conference:
end_date: 2020-07-19
location: Florenz
name: ' 10 th International Conference The Future of Education '
start_date: 2020-07-18
date_created: 2020-11-27T08:28:18Z
date_updated: 2023-03-15T13:49:50Z
department:
- _id: DEP1022
- _id: DEP2000
doi: 10.26352/E618_2384-9509
keyword:
- Artificial Intelligence
- intelligent tutoring system
- reflection
- project-based learning
- online-learning
- interactive video
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.academia.edu/43653971/The_Future_of_Education_Conference_Proceedings_2020
oa: '1'
page: 309-313
place: Bologna
publication: The Future of Education
publication_identifier:
eisbn:
- 978-88-85813-87-8
publication_status: published
publisher: Libreriauniversitaria.it
quality_controlled: '1'
status: public
title: 'Conceptual Design of an AI-Based Learning Assistant '
type: conference_editor_article
user_id: '79260'
year: 2020
...
---
_id: '12717'
abstract:
- lang: ger
text: "Der Anstieg der Komplexität in Produktionssystemen stellt eine der größten
Herausforderungen für produzierende\r\nUnternehmen dar. In der vorliegenden Dissertation
werden mögliche Auswirkungen von Komplexität auf die Performance von Produktionsgruppen
untersucht. Es werden sechs Studien durchgeführt, die inhaltlich und methodisch
aufeinander aufbauen und somit einen vollständigen Forschungsprozess von der initialen
Begriffsbestimmung bis hin zur Ableitung von Gestaltungsempfehlungen für die betriebliche
Praxis beschreiben.\r\nIn der Explorationsphase wird zunächst eine qualitative
Interviewstudie durchgeführt, um konkrete Treiber für das Phänomen der Komplexität
in digitalisierten Arbeitssystemen zu identifizieren. Basierend auf zwei systematischen
Literaturstudien wird der Stand der Forschung zu (1) Komplexitätsmodellen und
(2) Gruppenperformancemodellen im Kontext von Produktionssystemen strukturiert
erarbeitet und das bestehende Forschungsdefizit offengelegt.\r\nAuf der Grundlage
der Vorstudien wird ein hypothetisches Modell zur Erklärung der Performance von
Produktionsgruppen entwickelt, das neben bekannten Einflussgrößen aus der Teamforschung
verschiedene Komplexitätsdimensionen berücksichtigt. Die Operationalisierung der
latenten Variablen erfolgt mit Hilfe einer weiteren qualitativen Interviewstudie.
Das\r\nGruppenperformancemodell wird in einer Fragebogenstudie (n = 455) unter
Anwendung der Methode der Strukturgleichungsmodellierung empirisch evaluiert.
In der statistischen Auswertung wird u. a. festgestellt, dass ein positiver Zusammenhang
zwischen der Aufgabenkomplexität und der Gruppenperformance besteht, der über
die Qualität der Zusammenarbeit vermittelt wird. Dahingegen wird ein negativer
Zusammenhang zwischen der Komplexität des Gruppendesigns und der Gruppenperformance
identifiziert, der ebenfalls über die Qualität der Zusammenarbeit vermittelt wird.
Aus den Ergebnissen werden konkrete Empfehlungen für die komplexitätsbezogene
Gestaltung von Gruppenarbeit in der Produktion abgeleitet.\r\nDarüber hinaus wird
eine Metrik zur Erfassung der Komplexität des Arbeitsprozesses von Produktionsgruppen
entwickelt und in einer Simulationsstudie evaluiert. Die Metrik kann bereits in
Planungsphasen von Produktionssystemen verwendet werden, um alternative arbeitsorganisatorische
Gestaltungsoptionen anhand des resultierenden Komplexitätsniveaus für die Produktionsgruppe
vergleichend zu analysieren. Zudem können die Auswirkungen unterschiedlicher Qualifikationsprofile
auf das Komplexitätsniveau und die Performance einer Produktionsgruppe untersucht
werden."
- lang: eng
text: "The increase in complexity in production systems represents one of the major
challenges for manufacturing companies. In this dissertation, possible effects
of complexity on the performance of production groups are examined. Six studies
are carried out, which build on each other in terms of content and methodology
and thus cover a complete research process from\r\nthe initial definition of key
concepts up to the derivation of design recommendations for operational practice.\r\nWithin
the exploratory phase, a qualitative interview study is conducted in order to
identify drivers of the phenomenon of complexity in digitalized work systems.
Based on two systematic literature studies, the state of research on (1) complexity
models and (2) group performance models in the context of production systems is
examined in a structured way and the existing research deficit is pointed out.\r\nOn
the basis of the preliminary studies, a hypothetical model is developed to explain
the performance of production groups. The model includes different complexity
dimensions in addition to known influencing variables from team research. The
operationalization of the latent variables is carried out with a further qualitative
interview study. The group performance model is\r\nempirically evaluated in a
questionnaire study (n = 455) using the method of structural equation modelling.
On the one hand, the results of the statistical analysis show that there is a
positive relationship between task complexity and group performance, which is
mediated by the quality of teamwork. On the other hand, a negative relationship
is identified between the complexity of group design and group performance, which
is also mediated by the quality of teamwork. The findings are used to derive specific
recommendations for the complexity-related design of group work in production.\r\nIn
addition, a metric to capture the complexity of the work process of production
groups is developed and evaluated in a simulation study. The metric is applicable
in early planning phases of production systems. The resulting complexity level
for the production group can be used for a comparative analysis of organizational
design options. Furthermore, the effects of\r\ndifferent group qualification profiles
on the complexity level or performance of a production group can be assessed."
alternative_title:
- 'Effects of complexity on the performance of production groups '
author:
- first_name: Benedikt
full_name: Latos, Benedikt
id: '84474'
last_name: Latos
citation:
ama: Latos B. Auswirkungen von Komplexität auf die Performance von Produktionsgruppen.
Vol 37. Shaker Verlag; 2020. doi:10.2370/9783844077445
apa: Latos, B. (2020). Auswirkungen von Komplexität auf die Performance von Produktionsgruppen
(Vol. 37). Shaker Verlag. https://doi.org/10.2370/9783844077445
bjps: 'Latos B (2020) Auswirkungen von Komplexität auf die Performance
von Produktionsgruppen. Düren: Shaker Verlag.'
chicago: 'Latos, Benedikt. Auswirkungen von Komplexität auf die Performance von
Produktionsgruppen. Vol. 37. Industrial engineering and ergonomics. Düren:
Shaker Verlag, 2020. https://doi.org/10.2370/9783844077445.'
chicago-de: 'Latos, Benedikt. 2020. Auswirkungen von Komplexität auf die Performance
von Produktionsgruppen. Bd. 37. Industrial engineering and ergonomics. Düren:
Shaker Verlag. doi:10.2370/9783844077445,
.'
din1505-2-1: 'Latos, Benedikt: Auswirkungen
von Komplexität auf die Performance von Produktionsgruppen, Industrial
engineering and ergonomics. Bd. 37. Düren : Shaker Verlag, 2020'
havard: B. Latos, Auswirkungen von Komplexität auf die Performance von Produktionsgruppen,
Shaker Verlag, Düren, 2020.
ieee: 'B. Latos, Auswirkungen von Komplexität auf die Performance von Produktionsgruppen,
vol. 37. Düren: Shaker Verlag, 2020. doi: 10.2370/9783844077445.'
mla: Latos, Benedikt. Auswirkungen von Komplexität auf die Performance von Produktionsgruppen.
Shaker Verlag, 2020, https://doi.org/10.2370/9783844077445.
short: B. Latos, Auswirkungen von Komplexität auf die Performance von Produktionsgruppen,
Shaker Verlag, Düren, 2020.
ufg: 'Latos, Benedikt: Auswirkungen von Komplexität auf die Performance von
Produktionsgruppen, Bd. 37, Düren 2020 (Industrial engineering and ergonomics).'
van: 'Latos B. Auswirkungen von Komplexität auf die Performance von Produktionsgruppen.
Düren: Shaker Verlag; 2020. 324 p. (Industrial engineering and ergonomics; vol.
37).'
date_created: 2025-03-19T15:33:58Z
date_updated: 2025-03-21T08:30:45Z
defense_date: 2020-10-26
department:
- _id: DEP1500
doi: 10.2370/9783844077445
intvolume: ' 37'
keyword:
- Produktionssystem
- Komplexes System
- Teamwork
- Leistungsmessung
language:
- iso: ger
main_file_link:
- url: https://www.shaker.de/Online-Gesamtkatalog-Download/2025.03.19-16.26.58-193.16.112.100-rad4B15C.tmp/978-3-8440-7744-5_INH.PDF
page: '324'
place: Düren
publication_identifier:
isbn:
- 978-3-8440-7744-5
publication_status: published
publisher: Shaker Verlag
series_title: Industrial engineering and ergonomics
status: public
supervisor:
- first_name: Susanne
full_name: Mütze-Niewöhner, Susanne
last_name: Mütze-Niewöhner
- first_name: Verena
full_name: Nitsch, Verena
last_name: Nitsch
title: Auswirkungen von Komplexität auf die Performance von Produktionsgruppen
type: dissertation
user_id: '83781'
volume: 37
year: '2020'
...
---
_id: '1900'
abstract:
- lang: eng
text: More and more complex products are being fitted in small batches in manual
assembly. Because of this, more information needs to be collected from employees
and implemented in appropriate actions. At the same time, the informational design
of assembly systems often shows deficits in operational practice. Manual assembly
processes can be made more economical, reliable, and human-oriented with the help
of informational assistance systems. Testing was carried out in the Laboratory
for Industrial Engineering at the Ostwestfalen-Lippe University of Applied Sciences
and Arts to verify this potential. Initial results on the use of augmented reality
(AR) glasses in comparison to providing information in a paper-based format are
presented.
author:
- first_name: Sven
full_name: Bendzioch, Sven
id: '71395'
last_name: Bendzioch
- first_name: Dominic
full_name: Bläsing, Dominic
last_name: Bläsing
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
citation:
ama: 'Bendzioch S, Bläsing D, Hinrichsen S. Comparison of Different Assembly Assistance
Systems Under Ergonomic and Economic Aspects. In: Ahram T, Karwowski W, Pickl
S, Taiar R, eds. Human Systems Engineering and Design II Proceedings of the
2nd International Conference on Human Systems Engineering and Design (IHSED2019).
Vol 1026. Advances in Intelligent Systems and Computing. Cham: Springer Nature;
2019:20-25. doi:https://doi.org/10.1007/978-3-030-27928-8_4'
apa: 'Bendzioch, S., Bläsing, D., & Hinrichsen, S. (2019). Comparison of Different
Assembly Assistance Systems Under Ergonomic and Economic Aspects. In T. Ahram,
W. Karwowski, S. Pickl, & R. Taiar (Eds.), Human Systems Engineering and
Design II Proceedings of the 2nd International Conference on Human Systems Engineering
and Design (IHSED2019) (Vol. 1026, pp. 20–25). Cham: Springer Nature. https://doi.org/10.1007/978-3-030-27928-8_4'
bjps: 'Bendzioch S, Bläsing D and Hinrichsen S (2019) Comparison of Different
Assembly Assistance Systems Under Ergonomic and Economic Aspects. In Ahram T et
al. (eds), Human Systems Engineering and Design II Proceedings of the 2nd International
Conference on Human Systems Engineering and Design (IHSED2019), vol. 1026.
Cham: Springer Nature, pp. 20–25.'
chicago: 'Bendzioch, Sven, Dominic Bläsing, and Sven Hinrichsen. “Comparison of
Different Assembly Assistance Systems Under Ergonomic and Economic Aspects.” In
Human Systems Engineering and Design II Proceedings of the 2nd International
Conference on Human Systems Engineering and Design (IHSED2019), edited by
T. Ahram, W. Karwowski, S. Pickl, and R. Taiar, 1026:20–25. Advances in Intelligent
Systems and Computing. Cham: Springer Nature, 2019. https://doi.org/10.1007/978-3-030-27928-8_4.'
chicago-de: 'Bendzioch, Sven, Dominic Bläsing und Sven Hinrichsen. 2019. Comparison
of Different Assembly Assistance Systems Under Ergonomic and Economic Aspects.
In: Human Systems Engineering and Design II Proceedings of the 2nd International
Conference on Human Systems Engineering and Design (IHSED2019), hg. von T.
Ahram, W. Karwowski, S. Pickl, und R. Taiar, 1026:20–25. Advances in Intelligent
Systems and Computing. Cham: Springer Nature. doi:https://doi.org/10.1007/978-3-030-27928-8_4,
.'
din1505-2-1: 'Bendzioch, Sven ; Bläsing, Dominic ; Hinrichsen,
Sven: Comparison of Different Assembly Assistance Systems Under Ergonomic
and Economic Aspects. In: Ahram, T.
; Karwowski, W. ; Pickl,
S. ; Taiar, R. (Hrsg.): Human
Systems Engineering and Design II Proceedings of the 2nd International Conference
on Human Systems Engineering and Design (IHSED2019), Advances in Intelligent
Systems and Computing. Bd. 1026. Cham : Springer Nature, 2019, S. 20–25'
havard: 'S. Bendzioch, D. Bläsing, S. Hinrichsen, Comparison of Different Assembly
Assistance Systems Under Ergonomic and Economic Aspects, in: T. Ahram, W. Karwowski,
S. Pickl, R. Taiar (Eds.), Human Systems Engineering and Design II Proceedings
of the 2nd International Conference on Human Systems Engineering and Design (IHSED2019),
Springer Nature, Cham, 2019: pp. 20–25.'
ieee: S. Bendzioch, D. Bläsing, and S. Hinrichsen, “Comparison of Different Assembly
Assistance Systems Under Ergonomic and Economic Aspects,” in Human Systems
Engineering and Design II Proceedings of the 2nd International Conference on Human
Systems Engineering and Design (IHSED2019), Universität der Bundeswehr, München,
2019, vol. 1026, pp. 20–25.
mla: Bendzioch, Sven, et al. “Comparison of Different Assembly Assistance Systems
Under Ergonomic and Economic Aspects.” Human Systems Engineering and Design
II Proceedings of the 2nd International Conference on Human Systems Engineering
and Design (IHSED2019), edited by T. Ahram et al., vol. 1026, Springer Nature,
2019, pp. 20–25, doi:https://doi.org/10.1007/978-3-030-27928-8_4.
short: 'S. Bendzioch, D. Bläsing, S. Hinrichsen, in: T. Ahram, W. Karwowski, S.
Pickl, R. Taiar (Eds.), Human Systems Engineering and Design II Proceedings of
the 2nd International Conference on Human Systems Engineering and Design (IHSED2019),
Springer Nature, Cham, 2019, pp. 20–25.'
ufg: 'Bendzioch, Sven et. al. (2019): Comparison of Different Assembly Assistance
Systems Under Ergonomic and Economic Aspects, in: T. Ahram et. al. (Hgg.): Human
Systems Engineering and Design II Proceedings of the 2nd International Conference
on Human Systems Engineering and Design (IHSED2019) (=Advances in Intelligent
Systems and Computing 1026), Cham, S. 20–25.'
van: 'Bendzioch S, Bläsing D, Hinrichsen S. Comparison of Different Assembly Assistance
Systems Under Ergonomic and Economic Aspects. In: Ahram T, Karwowski W, Pickl
S, Taiar R, editors. Human Systems Engineering and Design II Proceedings of the
2nd International Conference on Human Systems Engineering and Design (IHSED2019).
Cham: Springer Nature; 2019. p. 20–5. (Advances in Intelligent Systems and Computing;
vol. 1026).'
conference:
end_date: 2019-09-18
location: Universität der Bundeswehr, München
name: '2nd International Conference on Human Systems Engineering and Design (IHSED2019):
Future Trends and Applications'
start_date: 2019-09-16
date_created: 2019-09-10T05:43:27Z
date_updated: 2023-03-15T13:49:37Z
department:
- _id: DEP7020
- _id: DEP1305
doi: https://doi.org/10.1007/978-3-030-27928-8_4
editor:
- first_name: T.
full_name: Ahram, T.
last_name: Ahram
- first_name: W.
full_name: Karwowski, W.
last_name: Karwowski
- first_name: S.
full_name: Pickl, S.
last_name: Pickl
- first_name: R.
full_name: Taiar, R.
last_name: Taiar
intvolume: ' 1026'
keyword:
- Worker assistance system
- Manual assembly
- Human-machine interaction
- Informational complexity
language:
- iso: eng
page: 20-25
place: Cham
project:
- _id: FBB6D104-44D9-11E9-AA25-B54CDB794CE1
name: Montexas 4.0
publication: Human Systems Engineering and Design II Proceedings of the 2nd International
Conference on Human Systems Engineering and Design (IHSED2019)
publication_identifier:
eisbn:
- 978-3-030-27928-8
isbn:
- 978-3-030-27927-1
publication_status: published
publisher: Springer Nature
quality_controlled: '1'
series_title: Advances in Intelligent Systems and Computing
status: public
title: Comparison of Different Assembly Assistance Systems Under Ergonomic and Economic
Aspects
type: conference
user_id: '74004'
volume: 1026
year: 2019
...
---
_id: '4323'
abstract:
- lang: eng
text: The latest generation of head-mounted displays such as HoloLens pro- vide
mixed reality capabilities that claim to better integrate the real and virtual
worlds. In this paper, we would like the share our experiences in implementing
a user interface for an assembly assistance system using the HoloLens. We carried
out a preliminary evaluation of the applicability of mixed reality using the per-
spective of developers and expert users in an assembly scenario that allows us
to operate and compare two interfaces - a state-of-the-art projector display system
and the HoloLens. We believe our findings may contribute towards a better un-
derstanding of the effects of new display technologies such as the HoloLens in
developing and using assistance systems in other fields as well. Areas that may
be of future research are also highlighted.
author:
- first_name: Hitesh
full_name: Dhiman, Hitesh
id: '71767'
last_name: Dhiman
- first_name: Sascha
full_name: Martinez, Sascha
last_name: Martinez
- first_name: Volker
full_name: Paelke, Volker
last_name: Paelke
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Dhiman H, Martinez S, Paelke V, Röcker C. Head-Mounted Displays in Industrial
AR-Applications: Ready for Prime Time? In: Fui-Hoon Nah F, Sophia Xiao B, eds.
HCI in Business, Government, and Organizations. Vol 10923. Lecture Notes
in Computer Science ; Information Systems and Applications, incl. Internet/Web,
and HCI . Springer; 2018:67-78. doi:10.1007/978-3-319-91716-0_6'
apa: 'Dhiman, H., Martinez, S., Paelke, V., & Röcker, C. (2018). Head-Mounted
Displays in Industrial AR-Applications: Ready for Prime Time? In F. Fui-Hoon Nah
& B. Sophia Xiao (Eds.), HCI in Business, Government, and Organizations
(Vol. 10923, pp. 67–78). Springer. https://doi.org/10.1007/978-3-319-91716-0_6'
bjps: 'Dhiman H et al. (2018) Head-Mounted Displays in Industrial
AR-Applications: Ready for Prime Time? In Fui-Hoon Nah F and Sophia Xiao B (eds),
HCI in Business, Government, and Organizations, vol. 10923. Cham: Springer,
pp. 67–78.'
chicago: 'Dhiman, Hitesh, Sascha Martinez, Volker Paelke, and Carsten Röcker. “Head-Mounted
Displays in Industrial AR-Applications: Ready for Prime Time?” In HCI in Business,
Government, and Organizations, edited by Fiona Fui-Hoon Nah and Bo Sophia
Xiao, 10923:67–78. Lecture Notes in Computer Science ; Information Systems and
Applications, Incl. Internet/Web, and HCI . Cham: Springer, 2018. https://doi.org/10.1007/978-3-319-91716-0_6.'
chicago-de: 'Dhiman, Hitesh, Sascha Martinez, Volker Paelke und Carsten Röcker.
2018. Head-Mounted Displays in Industrial AR-Applications: Ready for Prime Time?
In: HCI in Business, Government, and Organizations, hg. von Fiona Fui-Hoon
Nah und Bo Sophia Xiao, 10923:67–78. Lecture Notes in Computer Science ; Information
Systems and Applications, incl. Internet/Web, and HCI . Cham: Springer. doi:10.1007/978-3-319-91716-0_6,
.'
din1505-2-1: 'Dhiman, Hitesh ; Martinez, Sascha ; Paelke,
Volker ; Röcker, Carsten:
Head-Mounted Displays in Industrial AR-Applications: Ready for Prime Time? In:
Fui-Hoon Nah, F. ; Sophia
Xiao, B. (Hrsg.): HCI in Business, Government, and Organizations,
Lecture Notes in Computer Science ; Information Systems and Applications,
incl. Internet/Web, and HCI . Bd. 10923. Cham : Springer, 2018, S. 67–78'
havard: 'H. Dhiman, S. Martinez, V. Paelke, C. Röcker, Head-Mounted Displays in
Industrial AR-Applications: Ready for Prime Time?, in: F. Fui-Hoon Nah, B. Sophia
Xiao (Eds.), HCI in Business, Government, and Organizations, Springer, Cham, 2018:
pp. 67–78.'
ieee: 'H. Dhiman, S. Martinez, V. Paelke, and C. Röcker, “Head-Mounted Displays
in Industrial AR-Applications: Ready for Prime Time?,” in HCI in Business,
Government, and Organizations, Las Vegas, NV, USA, 2018, vol. 10923, pp. 67–78.
doi: 10.1007/978-3-319-91716-0_6.'
mla: 'Dhiman, Hitesh, et al. “Head-Mounted Displays in Industrial AR-Applications:
Ready for Prime Time?” HCI in Business, Government, and Organizations,
edited by Fiona Fui-Hoon Nah and Bo Sophia Xiao, vol. 10923, Springer, 2018, pp.
67–78, https://doi.org/10.1007/978-3-319-91716-0_6.'
short: 'H. Dhiman, S. Martinez, V. Paelke, C. Röcker, in: F. Fui-Hoon Nah, B. Sophia
Xiao (Eds.), HCI in Business, Government, and Organizations, Springer, Cham, 2018,
pp. 67–78.'
ufg: 'Dhiman, Hitesh u. a.: Head-Mounted Displays in Industrial AR-Applications:
Ready for Prime Time?, in: Fui-Hoon Nah, Fiona/Sophia Xiao, Bo (Hgg.):
HCI in Business, Government, and Organizations, Bd. 10923, Cham 2018 (Lecture
Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web,
and HCI ), S. 67–78.'
van: 'Dhiman H, Martinez S, Paelke V, Röcker C. Head-Mounted Displays in Industrial
AR-Applications: Ready for Prime Time? In: Fui-Hoon Nah F, Sophia Xiao B, editors.
HCI in Business, Government, and Organizations. Cham: Springer; 2018. p. 67–78.
(Lecture Notes in Computer Science ; Information Systems and Applications, incl.
Internet/Web, and HCI ; vol. 10923).'
conference:
end_date: 2018-07-20
location: Las Vegas, NV, USA
name: 5th International Conference, HCIBGO 2018, Held as Part of HCI International
2018
start_date: 2018-07-15
date_created: 2021-01-08T08:26:24Z
date_updated: 2025-04-11T09:02:30Z
department:
- _id: DEP5023
doi: 10.1007/978-3-319-91716-0_6
editor:
- first_name: Fiona
full_name: Fui-Hoon Nah, Fiona
last_name: Fui-Hoon Nah
- first_name: Bo
full_name: Sophia Xiao, Bo
last_name: Sophia Xiao
intvolume: ' 10923'
keyword:
- Human machine interaction
- Assembly assistance system
- Qualitative study
- HoloLens
language:
- iso: eng
page: 67-78
place: Cham
publication: HCI in Business, Government, and Organizations
publication_identifier:
eisbn:
- 978-3-319-91716-0
isbn:
- 978-3-319-91715-3
publication_status: published
publisher: Springer
series_title: 'Lecture Notes in Computer Science ; Information Systems and Applications,
incl. Internet/Web, and HCI '
status: public
title: 'Head-Mounted Displays in Industrial AR-Applications: Ready for Prime Time?'
type: conference
user_id: '83781'
volume: 10923
year: '2018'
...
---
_id: '559'
abstract:
- lang: eng
text: 'The navigation technique has been always an important issue for guiding an
automated guided vehicle (AGV). With the development of sensor technology, software
engineering, andalgorithms, there is a spectrum of different navigation methods
for AGVs. Inorder to avoid the additional environmental installation,so as to
increase the flexibility of route planning, but to keep the positioning precision,
more sensors, such as light detection and ranging (LIDAR), wheel encoders and
gyroscope are installed on the vehicles to be automated. Some intelligent algorithms
such as simultaneous localization and mapping (SLAM) algorithms and Monte Carlo
localization have been developed for the navigation of vehicles, including position
and orientation. The interesting question, especially for the AGVmanufacturers,
is: which algorithm is more suitable for which kind of applications. The suitabilityof
an algorithm for the navigation of AGVs with facilities of Light Detection and
Ranging(LIDAR), encoders and gyroscope ismainly determined by four properties.
They are the positioning precision, computational costs, execution time and positioning
repeatability. This paper intends to investigate the suitability of an algorithm
or a navigation method for AGVs with LIDAR, wheel encoders,and gyroscope. The
two aspects of positioningaccuracy and repeatability are especially concerned.
A general comparison of different navigation methods and algorithms is given.
An experimental platform with a basic vehicle, controlling system and sensors
is then developed to further evaluate the algorithms. The hardware components
and software components are compatible to robot operating system (ROS). This open-source
robotics middleware provides services and tools for creating robot applications.
As ROS SLAM nodes, open-source SLAM algorithms can be evaluated relatively easily
without any rewriting or modification of the algorithms. As a new research field,
there is not jet a SLAM algorithm, which is predominant absolutely.'
author:
- first_name: Li
full_name: Li, Li
id: '58482'
last_name: Li
- first_name: L.
full_name: Schulze, L.
last_name: Schulze
citation:
ama: 'Li L, Schulze L. Comparison and Evaluation of SLAM Algorithms for AGV Navigation.
In: Villmer F-J, Padoano E, Department of Production Engineering and Management,
eds. Production Engineering and Management. Lemgo; 2018:213-223.'
apa: Li, L., & Schulze, L. (2018). Comparison and Evaluation of SLAM Algorithms
for AGV Navigation. In F.-J. Villmer, E. Padoano, & Department of Production
Engineering and Management (Eds.), Production Engineering and Management
(pp. 213–223). Lemgo.
bjps: Li L and Schulze L (2018) Comparison and Evaluation of SLAM Algorithms
for AGV Navigation. In Villmer F-J, Padoano E and Department of Production Engineering
and Management (eds), Production Engineering and Management. Lemgo, pp.
213–223.
chicago: Li, Li, and L. Schulze. “Comparison and Evaluation of SLAM Algorithms for
AGV Navigation.” In Production Engineering and Management, edited by Franz-Josef
Villmer, Elio Padoano, and Department of Production Engineering and Management,
213–23. Lemgo, 2018.
chicago-de: 'Li, Li und L. Schulze. 2018. Comparison and Evaluation of SLAM Algorithms
for AGV Navigation. In: Production Engineering and Management, hg. von
Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and
Management, 213–223. Lemgo.'
din1505-2-1: 'Li, Li ; Schulze,
L.: Comparison and Evaluation of SLAM Algorithms for AGV Navigation. In:
Villmer, F.-J. ; Padoano,
E. ; Department of Production Engineering
and Management (Hrsg.): Production Engineering and Management. Lemgo,
2018, S. 213–223'
havard: 'L. Li, L. Schulze, Comparison and Evaluation of SLAM Algorithms for AGV
Navigation, in: F.-J. Villmer, E. Padoano, Department of Production Engineering
and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp.
213–223.'
ieee: L. Li and L. Schulze, “Comparison and Evaluation of SLAM Algorithms for AGV
Navigation,” in Production Engineering and Management, Lemgo, 2018, no.
1, pp. 213–223.
mla: Li, Li, and L. Schulze. “Comparison and Evaluation of SLAM Algorithms for AGV
Navigation.” Production Engineering and Management, edited by Franz-Josef
Villmer et al., no. 1, 2018, pp. 213–23.
short: 'L. Li, L. Schulze, in: F.-J. Villmer, E. Padoano, Department of Production
Engineering and Management (Eds.), Production Engineering and Management, Lemgo,
2018, pp. 213–223.'
ufg: 'Li, Li/Schulze, L. (2018): Comparison and Evaluation of SLAM Algorithms
for AGV Navigation, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering
and Management, Lemgo, S. 213–223.'
van: 'Li L, Schulze L. Comparison and Evaluation of SLAM Algorithms for AGV Navigation.
In: Villmer F-J, Padoano E, Department of Production Engineering and Management,
editors. Production Engineering and Management. Lemgo; 2018. p. 213–23.'
conference:
end_date: 2018-10-05
location: Lemgo
name: Proceedings 8th International Conference
start_date: 2018-10-04
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-13T15:56:30Z
date_updated: 2023-03-15T13:50:00Z
department:
- _id: DEP7000
- _id: DEP1306
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
issue: '1'
keyword:
- Automatedguided vehicle
- Simultaneous localization and mapping
- Robot operating system
- Light detection and ranging
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf
oa: '1'
page: 213-223
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-946856-03-0
publication_status: published
status: public
title: Comparison and Evaluation of SLAM Algorithms for AGV Navigation
type: conference
user_id: '45673'
year: 2018
...
---
_id: '11590'
abstract:
- lang: eng
text: Reading centers provide centralized high-quality diagnostics in ophthalmic
clinical trials. Since ophthalmic images are captured in electronic format at
peripheral clinics, an integrated workflow for image transfer and creation of
structured reports is needed, including quality assurance. The image portal and
the study database are separate components. We assessed whether this integration
is feasible with trial-related IT standards and built a prototype system as a
proof-of-concept. CDISC ODM and OAuth authentication were used to integrate the
image portal with x4T-EDC, facilitating automatic data transfer and single sign-on.
author:
- first_name: Philipp
full_name: Bruland, Philipp
id: '75847'
last_name: Bruland
orcid: 0000-0001-6939-7630
- first_name: Ulrike
full_name: Kathöfer, Ulrike
last_name: Kathöfer
- first_name: Maximilian
full_name: Treder, Maximilian
last_name: Treder
- first_name: Nicole
full_name: Eter, Nicole
last_name: Eter
- first_name: Martin
full_name: Dugas, Martin
last_name: Dugas
citation:
ama: Bruland P, Kathöfer U, Treder M, Eter N, Dugas M. Integrating x4T-EDC into
an Image-Portal to Establish an Ophthalmic Reading Center. Studies in health
technology and informatics. 2017;245:1254.
apa: Bruland, P., Kathöfer, U., Treder, M., Eter, N., & Dugas, M. (2017). Integrating
x4T-EDC into an Image-Portal to Establish an Ophthalmic Reading Center. Studies
in Health Technology and Informatics, 245, 1254.
bjps: Bruland P et al. (2017) Integrating X4T-EDC into an Image-Portal
to Establish an Ophthalmic Reading Center. Studies in health technology and
informatics 245, 1254.
chicago: 'Bruland, Philipp, Ulrike Kathöfer, Maximilian Treder, Nicole Eter, and
Martin Dugas. “Integrating X4T-EDC into an Image-Portal to Establish an Ophthalmic
Reading Center.” Studies in Health Technology and Informatics 245 (2017):
1254.'
chicago-de: 'Bruland, Philipp, Ulrike Kathöfer, Maximilian Treder, Nicole Eter und
Martin Dugas. 2017. Integrating x4T-EDC into an Image-Portal to Establish an Ophthalmic
Reading Center. Studies in health technology and informatics 245: 1254.'
din1505-2-1: 'Bruland, Philipp ; Kathöfer, Ulrike ; Treder,
Maximilian ; Eter, Nicole
; Dugas, Martin: Integrating x4T-EDC
into an Image-Portal to Establish an Ophthalmic Reading Center. In: Studies
in health technology and informatics Bd. 245, IOS Press (2017), S. 1254'
havard: P. Bruland, U. Kathöfer, M. Treder, N. Eter, M. Dugas, Integrating x4T-EDC
into an Image-Portal to Establish an Ophthalmic Reading Center., Studies in Health
Technology and Informatics. 245 (2017) 1254.
ieee: P. Bruland, U. Kathöfer, M. Treder, N. Eter, and M. Dugas, “Integrating x4T-EDC
into an Image-Portal to Establish an Ophthalmic Reading Center.,” Studies in
health technology and informatics, vol. 245, p. 1254, 2017.
mla: Bruland, Philipp, et al. “Integrating X4T-EDC into an Image-Portal to Establish
an Ophthalmic Reading Center.” Studies in Health Technology and Informatics,
vol. 245, 2017, p. 1254.
short: P. Bruland, U. Kathöfer, M. Treder, N. Eter, M. Dugas, Studies in Health
Technology and Informatics 245 (2017) 1254.
ufg: 'Bruland, Philipp u. a.: Integrating x4T-EDC into an Image-Portal to
Establish an Ophthalmic Reading Center., in: Studies in health technology and
informatics 245 (2017), S. 1254.'
van: Bruland P, Kathöfer U, Treder M, Eter N, Dugas M. Integrating x4T-EDC into
an Image-Portal to Establish an Ophthalmic Reading Center. Studies in health technology
and informatics. 2017;245:1254.
date_created: 2024-06-24T07:39:08Z
date_updated: 2024-08-15T12:56:05Z
department:
- _id: DEP5024
external_id:
pmid:
- '29295339'
intvolume: ' 245'
keyword:
- Electronic Data Capture
- Reading Center
- System Integration
language:
- iso: eng
page: '1254'
pmid: '1'
publication: Studies in health technology and informatics
publication_identifier:
eissn:
- 1879-8365
issn:
- 0926-9630
publication_status: published
publisher: IOS Press
status: public
title: Integrating x4T-EDC into an Image-Portal to Establish an Ophthalmic Reading
Center.
type: journal_article
user_id: '83781'
volume: 245
year: '2017'
...
---
_id: '2014'
abstract:
- lang: eng
text: Industrial applications are in transition towards modular and flexible architectures
that are capable of self-configuration and -optimisation. This is due to the demand
of mass customisation and the increasing complexity of industrial systems. The
conversion to modular systems is related to challenges in all disciplines. Consequently,
diverse tasks such as information processing, extensive networking, or system
monitoring using sensor and information fusion systems need to be reconsidered.
The focus of this contribution is on distributed sensor and information fusion
systems for system monitoring, which must reflect the increasing flexibility of
fusion systems. This contribution thus proposes an approach, which relies on a
network of self-descriptive intelligent sensor nodes, for the automatic design
and update of sensor and information fusion systems. This article encompasses
the fusion system configuration and adaptation as well as communication aspects.
Manual interaction with the flexibly changing system is reduced to a minimum.
article_number: '601'
author:
- first_name: Alexander
full_name: Fritze, Alexander
last_name: Fritze
- first_name: Uwe
full_name: Mönks, Uwe
id: '1825'
last_name: Mönks
- first_name: Christoph-Alexander
full_name: Holst, Christoph-Alexander
id: '64782'
last_name: Holst
- first_name: Volker
full_name: Lohweg, Volker
id: '1804'
last_name: Lohweg
orcid: 0000-0002-3325-7887
citation:
ama: Fritze A, Mönks U, Holst C-A, Lohweg V. An Approach to Automated Fusion System
Design and Adaptation. Sensors. 2017;17(3). doi: https://doi.org/10.3390/s17030601
apa: Fritze, A., Mönks, U., Holst, C.-A., & Lohweg, V. (2017). An Approach to
Automated Fusion System Design and Adaptation. Sensors, 17(3). https://doi.org/ https://doi.org/10.3390/s17030601
bjps: Fritze A et al. (2017) An Approach to Automated Fusion System
Design and Adaptation. Sensors 17.
chicago: Fritze, Alexander, Uwe Mönks, Christoph-Alexander Holst, and Volker Lohweg.
“An Approach to Automated Fusion System Design and Adaptation.” Sensors
17, no. 3 (2017). https://doi.org/
https://doi.org/10.3390/s17030601.
chicago-de: Fritze, Alexander, Uwe Mönks, Christoph-Alexander Holst und Volker Lohweg.
2017. An Approach to Automated Fusion System Design and Adaptation. Sensors
17, Nr. 3. doi:
https://doi.org/10.3390/s17030601, .
din1505-2-1: 'Fritze, Alexander ;
Mönks, Uwe ; Holst,
Christoph-Alexander ; Lohweg, Volker:
An Approach to Automated Fusion System Design and Adaptation. In: Sensors
Bd. 17 (2017), Nr. 3'
havard: A. Fritze, U. Mönks, C.-A. Holst, V. Lohweg, An Approach to Automated Fusion
System Design and Adaptation, Sensors. 17 (2017).
ieee: A. Fritze, U. Mönks, C.-A. Holst, and V. Lohweg, “An Approach to Automated
Fusion System Design and Adaptation,” Sensors, vol. 17, no. 3, 2017.
mla: Fritze, Alexander, et al. “An Approach to Automated Fusion System Design and
Adaptation.” Sensors, vol. 17, no. 3, 601, 2017, doi: https://doi.org/10.3390/s17030601.
short: A. Fritze, U. Mönks, C.-A. Holst, V. Lohweg, Sensors 17 (2017).
ufg: 'Fritze, Alexander et. al. (2017): An Approach to Automated Fusion System
Design and Adaptation, in: Sensors 17 (3).'
van: Fritze A, Mönks U, Holst C-A, Lohweg V. An Approach to Automated Fusion System
Design and Adaptation. Sensors. 2017;17(3).
date_created: 2019-11-25T08:52:14Z
date_updated: 2023-03-15T13:49:38Z
department:
- _id: DEP5023
doi: ' https://doi.org/10.3390/s17030601'
intvolume: ' 17'
issue: '3'
keyword:
- information fusion
- intelligent sensor
- knowledge-based system
- self-configuration
- sensor fusion
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.mdpi.com/1424-8220/17/3/601/htm
oa: '1'
publication: Sensors
publication_identifier:
issn:
- 1424-8220
publication_status: published
status: public
title: An Approach to Automated Fusion System Design and Adaptation
type: journal_article
user_id: '15514'
volume: 17
year: 2017
...
---
_id: '265'
abstract:
- lang: eng
text: The maintenance of a tool for injection molding or forming is usually accompanied
by its disassembly and assembly. The duration of the assembly activities is often
a large part of the total activity time for the maintenance of the tool. The degree
of performance of the employees in the execution of these disassembly and assembly
activities is often low. In addition, allowances occur (e.g. searching for work
equipment). At the Industrial Engineering Lab of the Ostwestfalen-Lippe University
of Applied Sciences, a prototype of an assistance system was developed to support
the assembly activities in toolmaking. With the help of this system, the operator
is guided step by step through the assembly process. The economic potential of
the system exists in the reduction of training times, the avoidance of assembly
errors and the increase of labor productivity.
author:
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Daniel
full_name: Riediger, Daniel
id: '52263'
last_name: Riediger
- first_name: Alexander
full_name: Unrau, Alexander
id: '64690'
last_name: Unrau
citation:
ama: 'Hinrichsen S, Riediger D, Unrau A. Development of a Projection-Based Assistance
System for Maintaining Injection Molding Tools. In: IEEE/ IEEM, ed. 2017 IEEE
International Conference on Industrial Engineering and Engineering Management
(IEEM). Danvers; 2017:1571-1575. doi:https://doi.org/10.1109/IEEM.2017.8290157'
apa: Hinrichsen, S., Riediger, D., & Unrau, A. (2017). Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools. In IEEE/ IEEM (Ed.),
2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM) (pp. 1571–1575). Danvers. https://doi.org/10.1109/IEEM.2017.8290157
bjps: Hinrichsen S, Riediger D and Unrau A (2017) Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools. In IEEE/ IEEM (ed.),
2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM). Danvers, pp. 1571–1575.
chicago: Hinrichsen, Sven, Daniel Riediger, and Alexander Unrau. “Development of
a Projection-Based Assistance System for Maintaining Injection Molding Tools.”
In 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM), edited by IEEE/ IEEM, 1571–75. Danvers, 2017. https://doi.org/10.1109/IEEM.2017.8290157.
chicago-de: 'Hinrichsen, Sven, Daniel Riediger und Alexander Unrau. 2017. Development
of a Projection-Based Assistance System for Maintaining Injection Molding Tools.
In: 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM), hg. von IEEE/ IEEM, 1571–1575. Danvers. doi:https://doi.org/10.1109/IEEM.2017.8290157,
.'
din1505-2-1: 'Hinrichsen, Sven ; Riediger, Daniel ; Unrau,
Alexander: Development of a Projection-Based Assistance System for Maintaining
Injection Molding Tools. In: IEEE/ IEEM
(Hrsg.): 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM). Danvers, 2017, S. 1571–1575'
havard: 'S. Hinrichsen, D. Riediger, A. Unrau, Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools, in: IEEE/ IEEM (Ed.),
2017 IEEE International Conference on Industrial Engineering and Engineering Management
(IEEM), Danvers, 2017: pp. 1571–1575.'
ieee: S. Hinrichsen, D. Riediger, and A. Unrau, “Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools,” in 2017 IEEE International
Conference on Industrial Engineering and Engineering Management (IEEM), Singapore,
2017, no. 1, pp. 1571–1575.
mla: Hinrichsen, Sven, et al. “Development of a Projection-Based Assistance System
for Maintaining Injection Molding Tools.” 2017 IEEE International Conference
on Industrial Engineering and Engineering Management (IEEM), edited by IEEE/
IEEM, no. 1, 2017, pp. 1571–75, doi:https://doi.org/10.1109/IEEM.2017.8290157.
short: 'S. Hinrichsen, D. Riediger, A. Unrau, in: IEEE/ IEEM (Ed.), 2017 IEEE International
Conference on Industrial Engineering and Engineering Management (IEEM), Danvers,
2017, pp. 1571–1575.'
ufg: 'Hinrichsen, Sven et. al. (2017): Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools, in: IEEE/ IEEM (Hg.):
2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM), Danvers, S. 1571–1575.'
van: 'Hinrichsen S, Riediger D, Unrau A. Development of a Projection-Based Assistance
System for Maintaining Injection Molding Tools. In: IEEE/ IEEM, editor. 2017 IEEE
International Conference on Industrial Engineering and Engineering Management
(IEEM). Danvers; 2017. p. 1571–5.'
conference:
end_date: 2017-12-13
location: Singapore
name: 'IEEE International Conference on Industrial Engineering and Engineering Management '
start_date: 2017-12-10
corporate_editor:
- IEEE/ IEEM
date_created: 2018-11-26T11:59:27Z
date_updated: 2023-03-15T13:49:41Z
ddc:
- '620'
department:
- _id: DEP7020
- _id: DEP1305
doi: https://doi.org/10.1109/IEEM.2017.8290157
issue: '1'
keyword:
- injection moulding
- machine tools
- maintenance engineering
- productivity
- projection-based assistance system
- injection molding tools
- assembly activities
- assembly process
- assembly errors
- tool maintenance
- disassembly activities
- economic potential
- Industrial Engineering Lab
- Ostwestfalen-Lippe University of Applied Sciences
- toolmaking
- Tools
- Injection molding
- Maintenance engineering
- Usability
- Task analysis
- Workstations
- Morphology
- assembly assistance systems
- assistance systems
- maintenance of injection molding tools
- manual assembly
language:
- iso: eng
page: 1571-1575
place: Danvers
publication: 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM)
publication_identifier:
isbn:
- '978-1-5386-0948-4 '
quality_controlled: '1'
status: public
title: Development of a Projection-Based Assistance System for Maintaining Injection
Molding Tools
type: conference
user_id: '74004'
year: 2017
...
---
_id: '4254'
abstract:
- lang: eng
text: The current trend of integrating machines and factories into cyber-physical
systems (CPS) creates an enormous complexity for operators of such systems. Especially
the search for the root cause of cascading failures becomes highly time-consuming.
Within this paper, we address the question on how to help human users to better
and faster understand root causes of such situations. We propose a concept of
interactive alarm flood reduction and present the implementation of a first vertical
prototype for such a system. We consider this prototype as a first artifact to
be discussed by the research community and aim towards an incremental further
development of the system in order to support humans in complex error situations.
author:
- first_name: Sebastian
full_name: Büttner, Sebastian
id: '61868'
last_name: Büttner
- first_name: Paul
full_name: Wunderlich, Paul
id: '52317'
last_name: Wunderlich
- first_name: Mario
full_name: Heinz, Mario
id: '68913'
last_name: Heinz
- first_name: Oliver
full_name: Niggemann, Oliver
id: '10876'
last_name: Niggemann
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Büttner S, Wunderlich P, Heinz M, Niggemann O, Röcker C. Managing Complexity:
Towards Intelligent Error-Handling Assistance Trough Interactive Alarm Flood Reduction.
In: Holzinger A, ed. Machine Learning and Knowledge Extraction : First IFIP
TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio,
Italy, August 29 – September 1, 2017, Proceedings. Vol 10410. Lecture Notes
in Computer Science . Cham: Springer; 2017:69-82.'
apa: 'Büttner, S., Wunderlich, P., Heinz, M., Niggemann, O., & Röcker, C. (2017).
Managing Complexity: Towards Intelligent Error-Handling Assistance Trough Interactive
Alarm Flood Reduction. In A. Holzinger (Ed.), Machine Learning and Knowledge
Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference,
CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings (Vol.
10410, pp. 69–82). Cham: Springer.'
bjps: 'Büttner S et al. (2017) Managing Complexity: Towards Intelligent
Error-Handling Assistance Trough Interactive Alarm Flood Reduction. In Holzinger
A (ed.), Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4,
8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy,
August 29 – September 1, 2017, Proceedings, vol. 10410. Cham: Springer, pp.
69–82.'
chicago: 'Büttner, Sebastian, Paul Wunderlich, Mario Heinz, Oliver Niggemann, and
Carsten Röcker. “Managing Complexity: Towards Intelligent Error-Handling Assistance
Trough Interactive Alarm Flood Reduction.” In Machine Learning and Knowledge
Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference,
CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, edited
by Andreas Holzinger, 10410:69–82. Lecture Notes in Computer Science . Cham: Springer,
2017.'
chicago-de: 'Büttner, Sebastian, Paul Wunderlich, Mario Heinz, Oliver Niggemann
und Carsten Röcker. 2017. Managing Complexity: Towards Intelligent Error-Handling
Assistance Trough Interactive Alarm Flood Reduction. In: Machine Learning
and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain
Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings,
hg. von Andreas Holzinger, 10410:69–82. Lecture Notes in Computer Science . Cham:
Springer.'
din1505-2-1: 'Büttner, Sebastian ;
Wunderlich, Paul ; Heinz,
Mario ; Niggemann, Oliver
; Röcker, Carsten: Managing Complexity:
Towards Intelligent Error-Handling Assistance Trough Interactive Alarm Flood Reduction.
In: Holzinger, A. (Hrsg.): Machine
Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International
Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1,
2017, Proceedings, Lecture Notes in Computer Science . Bd. 10410. Cham :
Springer, 2017, S. 69–82'
havard: 'S. Büttner, P. Wunderlich, M. Heinz, O. Niggemann, C. Röcker, Managing
Complexity: Towards Intelligent Error-Handling Assistance Trough Interactive Alarm
Flood Reduction, in: A. Holzinger (Ed.), Machine Learning and Knowledge Extraction :
First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE
2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, Springer, Cham,
2017: pp. 69–82.'
ieee: 'S. Büttner, P. Wunderlich, M. Heinz, O. Niggemann, and C. Röcker, “Managing
Complexity: Towards Intelligent Error-Handling Assistance Trough Interactive Alarm
Flood Reduction,” in Machine Learning and Knowledge Extraction : First IFIP
TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio,
Italy, August 29 – September 1, 2017, Proceedings, Reggio, Italy, 2017, vol.
10410, pp. 69–82.'
mla: 'Büttner, Sebastian, et al. “Managing Complexity: Towards Intelligent Error-Handling
Assistance Trough Interactive Alarm Flood Reduction.” Machine Learning and
Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain
Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings,
edited by Andreas Holzinger, vol. 10410, Springer, 2017, pp. 69–82.'
short: 'S. Büttner, P. Wunderlich, M. Heinz, O. Niggemann, C. Röcker, in: A. Holzinger
(Ed.), Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9,
12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August
29 – September 1, 2017, Proceedings, Springer, Cham, 2017, pp. 69–82.'
ufg: 'Büttner, Sebastian et. al. (2017): Managing Complexity: Towards Intelligent
Error-Handling Assistance Trough Interactive Alarm Flood Reduction, in: Andreas
Holzinger (Hg.): Machine Learning and Knowledge Extraction : First IFIP TC
5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio,
Italy, August 29 – September 1, 2017, Proceedings (=Lecture Notes in Computer
Science 10410), Cham, S. 69–82.'
van: 'Büttner S, Wunderlich P, Heinz M, Niggemann O, Röcker C. Managing Complexity:
Towards Intelligent Error-Handling Assistance Trough Interactive Alarm Flood Reduction.
In: Holzinger A, editor. Machine Learning and Knowledge Extraction : First IFIP
TC 5, WG 84, 89, 129 International Cross-Domain Conference, CD-MAKE 2017, Reggio,
Italy, August 29 – September 1, 2017, Proceedings. Cham: Springer; 2017. p. 69–82.
(Lecture Notes in Computer Science ; vol. 10410).'
conference:
end_date: 2017-09-01
location: Reggio, Italy
name: International Cross-Domain Conference, CD-MAKE 2017
start_date: 2017-08-29
date_created: 2020-12-10T13:40:04Z
date_updated: 2023-03-15T13:49:51Z
department:
- _id: DEP5023
editor:
- first_name: Andreas
full_name: Holzinger, Andreas
last_name: Holzinger
intvolume: ' 10410'
keyword:
- Alarm flood reduction
- Machine learning
- Assistive system
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 69-82
place: Cham
publication: ' Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4,
8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August
29 – September 1, 2017, Proceedings'
publication_identifier:
eisbn:
- '9783319668086 '
isbn:
- 978-3-319-66807-9
publication_status: published
publisher: Springer
series_title: 'Lecture Notes in Computer Science '
status: public
title: 'Managing Complexity: Towards Intelligent Error-Handling Assistance Trough
Interactive Alarm Flood Reduction'
type: conference
user_id: '15514'
volume: 10410
year: 2017
...
---
_id: '11142'
abstract:
- lang: eng
text: This dissertation proposes and investigates an isochronous wireless network
for industrial control applications with guaranteed latencies and jitter. Based
on a requirements analysis of real industrial applications and the characterisation
of the wireless channel, the solution approach is developed. It consists of a
TDMA-based medium access control, a dynamic resource allocation and the provision
of a global time base for the wired and the wireless network. Due to the global
time base, the solution approach allows a seamless and synchronous integration
into existing wired Real-time Ethernet systems.
author:
- first_name: Henning
full_name: Trsek, Henning
last_name: Trsek
citation:
ama: Trsek H. Isochronous Wireless Network for Real-Time Communication in Industrial
Automation. Springer ; 2016. doi:10.1007/978-3-662-49158-4
apa: Trsek, H. (2016). Isochronous Wireless Network for Real-time Communication
in Industrial Automation. Springer . https://doi.org/10.1007/978-3-662-49158-4
bjps: 'Trsek H (2016) Isochronous Wireless Network for Real-Time Communication
in Industrial Automation. Berlin, Heidelberg: Springer .'
chicago: 'Trsek, Henning. Isochronous Wireless Network for Real-Time Communication
in Industrial Automation. Technologien Für Die Intelligente Automation. Berlin,
Heidelberg: Springer , 2016. https://doi.org/10.1007/978-3-662-49158-4.'
chicago-de: 'Trsek, Henning. 2016. Isochronous Wireless Network for Real-time
Communication in Industrial Automation. Technologien für die intelligente
Automation. Berlin, Heidelberg: Springer . doi:10.1007/978-3-662-49158-4,
.'
din1505-2-1: 'Trsek, Henning: Isochronous
Wireless Network for Real-time Communication in Industrial Automation, Technologien
für die intelligente Automation. Berlin, Heidelberg : Springer , 2016'
havard: H. Trsek, Isochronous Wireless Network for Real-time Communication in Industrial
Automation, Springer , Berlin, Heidelberg, 2016.
ieee: 'H. Trsek, Isochronous Wireless Network for Real-time Communication in
Industrial Automation. Berlin, Heidelberg: Springer , 2016. doi: 10.1007/978-3-662-49158-4.'
mla: Trsek, Henning. Isochronous Wireless Network for Real-Time Communication
in Industrial Automation. Springer , 2016, https://doi.org/10.1007/978-3-662-49158-4.
short: H. Trsek, Isochronous Wireless Network for Real-Time Communication in Industrial
Automation, Springer , Berlin, Heidelberg, 2016.
ufg: 'Trsek, Henning: Isochronous Wireless Network for Real-time Communication
in Industrial Automation, Berlin, Heidelberg 2016 (Technologien für die intelligente
Automation).'
van: 'Trsek H. Isochronous Wireless Network for Real-time Communication in Industrial
Automation. Berlin, Heidelberg: Springer ; 2016. (Technologien für die intelligente
Automation).'
date_created: 2024-03-01T08:09:01Z
date_updated: 2024-03-05T14:34:59Z
department:
- _id: DEP5023
doi: 10.1007/978-3-662-49158-4
keyword:
- industrial wireless system
- wireless real-time communication
- deterministic medium access control
- isochronous WLAN
- industrial automation
language:
- iso: eng
place: Berlin, Heidelberg
publication_identifier:
eisbn:
- 978-3-662-49158-4
eissn:
- 2522-8587
isbn:
- 978-3-662-49157-7
issn:
- '2522-8579 '
publication_status: published
publisher: 'Springer '
series_title: Technologien für die intelligente Automation
status: public
title: Isochronous Wireless Network for Real-time Communication in Industrial Automation
type: dissertation
user_id: '83781'
year: '2016'
...
---
_id: '4303'
abstract:
- lang: eng
text: The increasing demand to customize products affects production workers in
many industries, as assembly tasks become more complex due to higher product variety.
Assistive systems providing instructions at the workplace have been proposed to
overcome increasing cognitive demand during assembly tasks. Commercially available
assistive systems provide spatially registered instructions, either by using in-situ
projections or head-mounted displays (HMDs). As there is little empirical knowledge
about the individual advantages and disadvantages of both approaches, we are interested
in comparing both types of systems. Through a user study at a manual assembly
workplace, we compare both approaches to a paper baseline. Our results reveal
that both in-situ instructions and paper instructions lead to significantly faster
task completion times and significantly fewer errors than HMDs. Using additional
questionnaires and interviews, we are able to identify the shortcomings of HMD-based
instructions and discuss the possibilities of using flexible in-situ instructions
for worker assistance.
author:
- first_name: Sebastian
full_name: Büttner, Sebastian
id: '61868'
last_name: Büttner
- first_name: Markus
full_name: Funk, Markus
last_name: Funk
- first_name: Oliver
full_name: Sand, Oliver
last_name: Sand
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Büttner S, Funk M, Sand O, Röcker C. Using Head-Mounted Displays and In-Situ
Projection for Assistive Systems : A Comparison. In: 9th ACM International
Conference on PErvasive Technologies Related to Assistive Environments (PETRA
’16) . Korfu, Griechenland: ACM; 2016:1-8. doi:10.1145/2910674.2910679'
apa: 'Büttner, S., Funk, M., Sand, O., & Röcker, C. (2016). Using Head-Mounted
Displays and In-Situ Projection for Assistive Systems : A Comparison. In 9th
ACM International Conference on PErvasive Technologies Related to Assistive Environments
(PETRA ’16) (pp. 1–8). Korfu, Griechenland: ACM. https://doi.org/10.1145/2910674.2910679'
bjps: 'Büttner S et al. (2016) Using Head-Mounted Displays and In-Situ
Projection for Assistive Systems : A Comparison. 9th ACM International Conference
on PErvasive Technologies Related to Assistive Environments (PETRA ’16) .
Korfu, Griechenland: ACM, pp. 1–8.'
chicago: 'Büttner, Sebastian, Markus Funk, Oliver Sand, and Carsten Röcker. “Using
Head-Mounted Displays and In-Situ Projection for Assistive Systems : A Comparison.”
In 9th ACM International Conference on PErvasive Technologies Related to Assistive
Environments (PETRA ’16) , 1–8. Korfu, Griechenland: ACM, 2016. https://doi.org/10.1145/2910674.2910679.'
chicago-de: 'Büttner, Sebastian, Markus Funk, Oliver Sand und Carsten Röcker. 2016.
Using Head-Mounted Displays and In-Situ Projection for Assistive Systems : A Comparison.
In: 9th ACM International Conference on PErvasive Technologies Related to Assistive
Environments (PETRA ’16) , 1–8. Korfu, Griechenland: ACM. doi:10.1145/2910674.2910679,
.'
din1505-2-1: 'Büttner, Sebastian ;
Funk, Markus ; Sand,
Oliver ; Röcker, Carsten:
Using Head-Mounted Displays and In-Situ Projection for Assistive Systems : A Comparison.
In: 9th ACM International Conference on PErvasive Technologies Related to Assistive
Environments (PETRA ’16) . Korfu, Griechenland : ACM, 2016, S. 1–8'
havard: 'S. Büttner, M. Funk, O. Sand, C. Röcker, Using Head-Mounted Displays and
In-Situ Projection for Assistive Systems : A Comparison, in: 9th ACM International
Conference on PErvasive Technologies Related to Assistive Environments (PETRA
’16) , ACM, Korfu, Griechenland, 2016: pp. 1–8.'
ieee: 'S. Büttner, M. Funk, O. Sand, and C. Röcker, “Using Head-Mounted Displays
and In-Situ Projection for Assistive Systems : A Comparison,” in 9th ACM International
Conference on PErvasive Technologies Related to Assistive Environments (PETRA
’16) , Corfu; Greece , 2016, pp. 1–8.'
mla: 'Büttner, Sebastian, et al. “Using Head-Mounted Displays and In-Situ Projection
for Assistive Systems : A Comparison.” 9th ACM International Conference on
PErvasive Technologies Related to Assistive Environments (PETRA ’16) , ACM,
2016, pp. 1–8, doi:10.1145/2910674.2910679.'
short: 'S. Büttner, M. Funk, O. Sand, C. Röcker, in: 9th ACM International Conference
on PErvasive Technologies Related to Assistive Environments (PETRA ’16) , ACM,
Korfu, Griechenland, 2016, pp. 1–8.'
ufg: 'Büttner, Sebastian et. al. (2016): Using Head-Mounted Displays and
In-Situ Projection for Assistive Systems : A Comparison, in: 9th ACM International
Conference on PErvasive Technologies Related to Assistive Environments (PETRA
’16) , Korfu, Griechenland, S. 1–8.'
van: 'Büttner S, Funk M, Sand O, Röcker C. Using Head-Mounted Displays and In-Situ
Projection for Assistive Systems : A Comparison. In: 9th ACM International Conference
on PErvasive Technologies Related to Assistive Environments (PETRA ’16) . Korfu,
Griechenland: ACM; 2016. p. 1–8.'
conference:
end_date: 2016-07-01
location: 'Corfu; Greece '
name: 'PETRA ''16: Proceedings of the 9th ACM International Conference on PErvasive
Technologies Related to Assistive Environments'
start_date: 2016-06-29
date_created: 2020-12-22T14:11:07Z
date_updated: 2023-03-15T13:49:51Z
department:
- _id: DEP5023
doi: 10.1145/2910674.2910679
keyword:
- Spatial Augmented Reality
- Industrial Augmented Reality
- Projection-based Augmented Reality
- Head-Mounted Display
- Manufacturing
- Assistive System
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 1-8
place: Korfu, Griechenland
publication: '9th ACM International Conference on PErvasive Technologies Related to
Assistive Environments (PETRA ''16) '
publication_identifier:
isbn:
- 978-1-4503-4337-4
publication_status: published
publisher: ACM
status: public
title: 'Using Head-Mounted Displays and In-Situ Projection for Assistive Systems :
A Comparison'
type: conference
user_id: '15514'
year: 2016
...
---
_id: '593'
abstract:
- lang: eng
text: Due to the increased individualization of customer demands in the last 20
years, the production systems are required to be more flexible and scalable. It
is the samefor the material flow system with automated guided vehicles (AGVs).
To realize the flexibility and scalability, it is recommended to decentralized
control the vehicles. As an attempt, a concept of swarm intelligence with Radio
Frequency Identification (RFID) is proposed and introduced in this article. The
concept is supposed to be used for automated guided vehicle systems in which objects
have to be transported from place to place. Therefore the object has to be self-organized
and has to manage its own transport. In this context the vehicles have to choose
the most optimal transportation. Swarm intelligence is a topic which deserves
a high level of attention as a method to realize high flexibility and scalability.
author:
- first_name: Alisa Maria
full_name: Cantauw, Alisa Maria
id: '56638'
last_name: Cantauw
- first_name: Li
full_name: Li, Li
id: '58482'
last_name: Li
citation:
ama: 'Cantauw AM, Li L. Application of Swarm Intelligence for Automated Guided Vehicle
Systems. In: Villmer F-J, Padoano E, Department of Production Engineering and
Management, eds. Department of Production Engineering and Management. Lemgo;
2016:133-143.'
apa: Cantauw, A. M., & Li, L. (2016). Application of Swarm Intelligence for
Automated Guided Vehicle Systems. In F.-J. Villmer, E. Padoano, & Department
of Production Engineering and Management (Eds.), Department of Production Engineering
and Management (pp. 133–143). Lemgo.
bjps: Cantauw AM and Li L (2016) Application of Swarm Intelligence for Automated
Guided Vehicle Systems. In Villmer F-J, Padoano E and Department of Production
Engineering and Management (eds), Department of Production Engineering and
Management. Lemgo, pp. 133–143.
chicago: Cantauw, Alisa Maria, and Li Li. “Application of Swarm Intelligence for
Automated Guided Vehicle Systems.” In Department of Production Engineering
and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department
of Production Engineering and Management, 133–43. Lemgo, 2016.
chicago-de: 'Cantauw, Alisa Maria und Li Li. 2016. Application of Swarm Intelligence
for Automated Guided Vehicle Systems. In: Department of Production Engineering
and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department
of Production Engineering and Management, 133–143. Lemgo.'
din1505-2-1: 'Cantauw, Alisa Maria
; Li, Li: Application of Swarm Intelligence
for Automated Guided Vehicle Systems. In: Villmer,
F.-J. ; Padoano, E. ; Department of Production Engineering and Management
(Hrsg.): Department of Production Engineering and Management. Lemgo, 2016,
S. 133–143'
havard: 'A.M. Cantauw, L. Li, Application of Swarm Intelligence for Automated Guided
Vehicle Systems, in: F.-J. Villmer, E. Padoano, Department of Production Engineering
and Management (Eds.), Department of Production Engineering and Management, Lemgo,
2016: pp. 133–143.'
ieee: A. M. Cantauw and L. Li, “Application of Swarm Intelligence for Automated
Guided Vehicle Systems,” in Department of Production Engineering and Management,
Lemgo, 2016, no. 1, pp. 133–143.
mla: Cantauw, Alisa Maria, and Li Li. “Application of Swarm Intelligence for Automated
Guided Vehicle Systems.” Department of Production Engineering and Management,
edited by Franz-Josef Villmer et al., no. 1, 2016, pp. 133–43.
short: 'A.M. Cantauw, L. Li, in: F.-J. Villmer, E. Padoano, Department of Production
Engineering and Management (Eds.), Department of Production Engineering and Management,
Lemgo, 2016, pp. 133–143.'
ufg: 'Cantauw, Alisa Maria/Li, Li (2016): Application of Swarm Intelligence
for Automated Guided Vehicle Systems, in: Franz-Josef Villmer et. al. (Hgg.):
Department of Production Engineering and Management, Lemgo, S. 133–143.'
van: 'Cantauw AM, Li L. Application of Swarm Intelligence for Automated Guided Vehicle
Systems. In: Villmer F-J, Padoano E, Department of Production Engineering and
Management, editors. Department of Production Engineering and Management. Lemgo;
2016. p. 133–43.'
conference:
end_date: 2016-09-30
location: Lemgo
name: Proceedings 6th International Conference
start_date: 2016-09-29
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-18T15:32:10Z
date_updated: 2023-03-15T13:50:03Z
department:
- _id: DEP7000
- _id: DEP1306
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
issue: '1'
keyword:
- Swarm intelligence
- Automated guided vehicle system
- RFID
- Internet of things
- Multi-agent system
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf
oa: '1'
page: 133-143
place: Lemgo
publication: Department of Production Engineering and Management
publication_identifier:
isbn:
- 978-3-946856-00-9
publication_status: published
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf
status: public
title: Application of Swarm Intelligence for Automated Guided Vehicle Systems
type: conference
user_id: '45673'
year: 2016
...
---
_id: '2128'
abstract:
- lang: eng
text: We present the concept of a perceptive motor in terms of a cyber-physical
system (CPS). A model application monitoring a knitting process was developed,
where the take-off of the produced fabric is controlled by an electric motor.
The idea is to equip a synchronous motor with a smart camera and appropriate image
processing hard- and software components. Subsequently, the characteristics of
knitted fabric are analysed by machine-learning (ML) methods. Our concept includes
motor-current analysis and image processing. The aim is to implement an assistance
system for the industrial large circular knitting process. An assistance system
will help to shorten the retrofitting process. The concept is based on a low cost
hardware approach for a smart camera, and stems from the recent development of
image processing applications for mobile devices [1–4].
author:
- first_name: Kristijan
full_name: Vukovic, Kristijan
last_name: Vukovic
- first_name: Kristina
full_name: Simonis, Kristina
last_name: Simonis
- first_name: Helene
full_name: Dörksen, Helene
id: '46416'
last_name: Dörksen
- first_name: Volker
full_name: Lohweg, Volker
id: '1804'
last_name: Lohweg
orcid: 0000-0002-3325-7887
citation:
ama: 'Vukovic K, Simonis K, Dörksen H, Lohweg V. Efficient Image Processing System
for an Industrial Machine Learning Task. In: Conference on Machine Learning
for Cyber-Physical Systems (ML4CPS). Fraunhofer Application Centre IOSB-INA,
Lemgo; 2015. doi:10.1007/978-3-662-48838-6_8'
apa: Vukovic, K., Simonis, K., Dörksen, H., & Lohweg, V. (2015). Efficient Image
Processing System for an Industrial Machine Learning Task. In Conference on
Machine Learning for Cyber-Physical Systems (ML4CPS). Fraunhofer Application
Centre IOSB-INA, Lemgo. https://doi.org/10.1007/978-3-662-48838-6_8
bjps: Vukovic K et al. (2015) Efficient Image Processing System for
an Industrial Machine Learning Task. Conference on Machine Learning for Cyber-Physical
Systems (ML4CPS). Fraunhofer Application Centre IOSB-INA, Lemgo.
chicago: Vukovic, Kristijan, Kristina Simonis, Helene Dörksen, and Volker Lohweg.
“Efficient Image Processing System for an Industrial Machine Learning Task.” In
Conference on Machine Learning for Cyber-Physical Systems (ML4CPS). Fraunhofer
Application Centre IOSB-INA, Lemgo, 2015. https://doi.org/10.1007/978-3-662-48838-6_8.
chicago-de: 'Vukovic, Kristijan, Kristina Simonis, Helene Dörksen und Volker Lohweg.
2015. Efficient Image Processing System for an Industrial Machine Learning Task.
In: Conference on Machine Learning for Cyber-Physical Systems (ML4CPS).
Fraunhofer Application Centre IOSB-INA, Lemgo. doi:10.1007/978-3-662-48838-6_8,
.'
din1505-2-1: 'Vukovic, Kristijan ;
Simonis, Kristina ; Dörksen,
Helene ; Lohweg, Volker:
Efficient Image Processing System for an Industrial Machine Learning Task. In:
Conference on Machine Learning for Cyber-Physical Systems (ML4CPS). Fraunhofer
Application Centre IOSB-INA, Lemgo, 2015'
havard: 'K. Vukovic, K. Simonis, H. Dörksen, V. Lohweg, Efficient Image Processing
System for an Industrial Machine Learning Task, in: Conference on Machine Learning
for Cyber-Physical Systems (ML4CPS), Fraunhofer Application Centre IOSB-INA, Lemgo,
2015.'
ieee: K. Vukovic, K. Simonis, H. Dörksen, and V. Lohweg, “Efficient Image Processing
System for an Industrial Machine Learning Task,” in Conference on Machine Learning
for Cyber-Physical Systems (ML4CPS), 2015.
mla: Vukovic, Kristijan, et al. “Efficient Image Processing System for an Industrial
Machine Learning Task.” Conference on Machine Learning for Cyber-Physical Systems
(ML4CPS), 2015, doi:10.1007/978-3-662-48838-6_8.
short: 'K. Vukovic, K. Simonis, H. Dörksen, V. Lohweg, in: Conference on Machine
Learning for Cyber-Physical Systems (ML4CPS), Fraunhofer Application Centre IOSB-INA,
Lemgo, 2015.'
ufg: 'Vukovic, Kristijan et. al. (2015): Efficient Image Processing System
for an Industrial Machine Learning Task, in: Conference on Machine Learning
for Cyber-Physical Systems (ML4CPS), Fraunhofer Application Centre IOSB-INA,
Lemgo.'
van: 'Vukovic K, Simonis K, Dörksen H, Lohweg V. Efficient Image Processing System
for an Industrial Machine Learning Task. In: Conference on Machine Learning for
Cyber-Physical Systems (ML4CPS). Fraunhofer Application Centre IOSB-INA, Lemgo;
2015.'
date_created: 2019-12-04T09:04:50Z
date_updated: 2023-03-15T13:49:38Z
department:
- _id: DEP5023
doi: 10.1007/978-3-662-48838-6_8
keyword:
- Assistance System
- Euler Number
- Synchronous Motor
- Image Processing System
- Image Processing Method
language:
- iso: eng
main_file_link:
- url: https://link.springer.com/chapter/10.1007/978-3-662-48838-6_8
place: Fraunhofer Application Centre IOSB-INA, Lemgo
publication: Conference on Machine Learning for Cyber-Physical Systems (ML4CPS)
status: public
title: Efficient Image Processing System for an Industrial Machine Learning Task
type: conference
user_id: '68554'
year: 2015
...
---
_id: '2140'
abstract:
- lang: eng
text: 'Recent industrial applications are implemented in a modular way, resulting
in flexibility during the whole life cycle, i.e., setup, operation, and maintenance.
This applies especially to larger applications like logistic, production, and
printing processes. Their modular character is resulting from the constantly increasing
complexity of such installations, which makes their supervision for securing reliable
operation a difficult task: the data of hundreds (if not thousands) of signal
sources must be acquired, communicated, and evaluated for system diagnosis. In
this contribution we summarize the challenges arising in such applications and
show that distributed sensor and information fusion for modular self-diagnosis
tackles these challenges. Here, we propose an innovative distributed architecture
encompassing intelligent sensor nodes, self-configuring real-time communication
networks, and a suitable sensor and information fusion system for condition monitoring.
New challenges arise in the context of distributed information fusion systems,
which are identified and to which an outlook on future solutions is provided.
A number of these solutions have already been discovered, implemented, and are
evaluated in the context of a demonstrator, which resembles a real-world printing
application.'
author:
- first_name: Uwe
full_name: Mönks, Uwe
id: '1825'
last_name: Mönks
- first_name: Henning
full_name: Trsek, Henning
id: '1486'
last_name: Trsek
- first_name: Lars
full_name: Dürkop, Lars
last_name: Dürkop
- first_name: Volker
full_name: Geneiß, Volker
last_name: Geneiß
- first_name: Volker
full_name: Lohweg, Volker
id: '1804'
last_name: Lohweg
orcid: 0000-0002-3325-7887
citation:
ama: Mönks U, Trsek H, Dürkop L, Geneiß V, Lohweg V. Towards distributed intelligent
sensor and information fusion. Mechatronics. 2015;(34):63-71. doi:10.1016/j.mechatronics.2015.05.005
apa: Mönks, U., Trsek, H., Dürkop, L., Geneiß, V., & Lohweg, V. (2015). Towards
distributed intelligent sensor and information fusion. Mechatronics, (34),
63–71. https://doi.org/10.1016/j.mechatronics.2015.05.005
bjps: Mönks U et al. (2015) Towards Distributed Intelligent Sensor
and Information Fusion. Mechatronics 63–71.
chicago: 'Mönks, Uwe, Henning Trsek, Lars Dürkop, Volker Geneiß, and Volker Lohweg.
“Towards Distributed Intelligent Sensor and Information Fusion.” Mechatronics,
no. 34 (2015): 63–71. https://doi.org/10.1016/j.mechatronics.2015.05.005.'
chicago-de: 'Mönks, Uwe, Henning Trsek, Lars Dürkop, Volker Geneiß und Volker Lohweg.
2015. Towards distributed intelligent sensor and information fusion. Mechatronics,
Nr. 34: 63–71. doi:10.1016/j.mechatronics.2015.05.005,
.'
din1505-2-1: 'Mönks, Uwe ; Trsek,
Henning ; Dürkop, Lars ;
Geneiß, Volker ; Lohweg,
Volker: Towards distributed intelligent sensor and information fusion.
In: Mechatronics, Elsevier (2015), Nr. 34, S. 63–71'
havard: U. Mönks, H. Trsek, L. Dürkop, V. Geneiß, V. Lohweg, Towards distributed
intelligent sensor and information fusion, Mechatronics. (2015) 63–71.
ieee: U. Mönks, H. Trsek, L. Dürkop, V. Geneiß, and V. Lohweg, “Towards distributed
intelligent sensor and information fusion,” Mechatronics, no. 34, pp. 63–71,
2015.
mla: Mönks, Uwe, et al. “Towards Distributed Intelligent Sensor and Information
Fusion.” Mechatronics, no. 34, Elsevier, 2015, pp. 63–71, doi:10.1016/j.mechatronics.2015.05.005.
short: U. Mönks, H. Trsek, L. Dürkop, V. Geneiß, V. Lohweg, Mechatronics (2015)
63–71.
ufg: 'Mönks, Uwe et. al. (2015): Towards distributed intelligent sensor and
information fusion, in: Mechatronics (34), S. 63–71.'
van: Mönks U, Trsek H, Dürkop L, Geneiß V, Lohweg V. Towards distributed intelligent
sensor and information fusion. Mechatronics. 2015;(34):63–71.
date_created: 2019-12-04T09:29:07Z
date_updated: 2023-03-15T13:49:39Z
department:
- _id: DEP5023
doi: 10.1016/j.mechatronics.2015.05.005
issue: '34'
keyword:
- Cyber-physical systems
- Information fusion
- Fusion system design
- Intelligent sensors
- Self-configuration
- Intelligent networking
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.sciencedirect.com/science/article/pii/S0957415815000707
oa: '1'
page: 63-71
publication: Mechatronics
publication_identifier:
issn:
- 0957-4158
publisher: Elsevier
status: public
title: Towards distributed intelligent sensor and information fusion
type: journal_article
user_id: '68554'
year: 2015
...
---
_id: '427'
abstract:
- lang: ger
text: Für Länder mit hohen Lohnkosten eignen sich aus wirtschaftlichen Gründen hauptsächlich
hochautomatisierte Montagekonzepte. Für Niedriglohnländer hybride oder ausschließlich
manuelle Montagesysteme. Ein ideales Montagekonzept ist so gestaltet, dass es
durch wandlungsfähige Eigenschaften beide Ländertypen mit wenig Änderungsaufwand
abdecken kann. Der Beitrag behandelt Möglichkeiten und Ansätze, um solch ein wandlungsfähiges,
hybrides Montagesystem zu gestalten und erläutert die Realisierung ausgewählter
Methoden an einem hybriden Montagesystem der Continental AG.
author:
- first_name: Jan
full_name: Hrdina, Jan
last_name: Hrdina
- first_name: Thilo Gerhard
full_name: Gamber, Thilo Gerhard
id: '71451'
last_name: Gamber
citation:
ama: 'Hrdina J, Gamber TG. Einsatz von Methoden der Wandlungsfähigkeit bei einem
hybriden Montagesystem. In: Gesellschaft für Arbeitswissenschaft e.V., ed.
Verantwortung für die Arbeit der Zukunft, Frühjahrskongress der Gesellschaft für
Arbeitswissenschaft. Dortmund: GfA-Press; 2015.'
apa: 'Hrdina, J., & Gamber, T. G. (2015). Einsatz von Methoden der Wandlungsfähigkeit
bei einem hybriden Montagesystem. In Gesellschaft für Arbeitswissenschaft e.V.
(Ed.), Verantwortung für die Arbeit der Zukunft, Frühjahrskongress der Gesellschaft
für Arbeitswissenschaft. Dortmund: GfA-Press.'
bjps: 'Hrdina J and Gamber TG (2015) Einsatz von Methoden der Wandlungsfähigkeit
bei einem hybriden Montagesystem. In Gesellschaft für Arbeitswissenschaft e.V.
(ed.), Verantwortung für die Arbeit der Zukunft, Frühjahrskongress der Gesellschaft
für Arbeitswissenschaft. Dortmund: GfA-Press.'
chicago: 'Hrdina, Jan, and Thilo Gerhard Gamber. “Einsatz von Methoden der Wandlungsfähigkeit
bei einem hybriden Montagesystem.” In Verantwortung für die Arbeit der Zukunft,
Frühjahrskongress der Gesellschaft für Arbeitswissenschaft, edited by Gesellschaft
für Arbeitswissenschaft e.V. Dortmund: GfA-Press, 2015.'
chicago-de: 'Hrdina, Jan und Thilo Gerhard Gamber. 2015. Einsatz von Methoden der
Wandlungsfähigkeit bei einem hybriden Montagesystem. In: Verantwortung für
die Arbeit der Zukunft, Frühjahrskongress der Gesellschaft für Arbeitswissenschaft,
hg. von Gesellschaft für Arbeitswissenschaft e.V. Dortmund: GfA-Press.'
din1505-2-1: 'Hrdina, Jan ; Gamber, Thilo Gerhard: Einsatz von Methoden
der Wandlungsfähigkeit bei einem hybriden Montagesystem. In: Gesellschaft
für Arbeitswissenschaft e.V. (Hrsg.): Verantwortung für die Arbeit
der Zukunft, Frühjahrskongress der Gesellschaft für Arbeitswissenschaft. Dortmund :
GfA-Press, 2015'
havard: 'J. Hrdina, T.G. Gamber, Einsatz von Methoden der Wandlungsfähigkeit bei
einem hybriden Montagesystem, in: Gesellschaft für Arbeitswissenschaft e.V. (Ed.), Verantwortung
für die Arbeit der Zukunft, Frühjahrskongress der Gesellschaft für Arbeitswissenschaft,
GfA-Press, Dortmund, 2015.'
ieee: J. Hrdina and T. G. Gamber, “Einsatz von Methoden der Wandlungsfähigkeit bei
einem hybriden Montagesystem,” in Verantwortung für die Arbeit der Zukunft,
Frühjahrskongress der Gesellschaft für Arbeitswissenschaft, Karlsruhe, 2015.
mla: Hrdina, Jan, and Thilo Gerhard Gamber. “Einsatz von Methoden der Wandlungsfähigkeit
bei einem hybriden Montagesystem.” Verantwortung für die Arbeit der Zukunft,
Frühjahrskongress der Gesellschaft für Arbeitswissenschaft, edited by Gesellschaft
für Arbeitswissenschaft e.V., GfA-Press, 2015.
short: 'J. Hrdina, T.G. Gamber, in: Gesellschaft für Arbeitswissenschaft e.V. (Ed.), Verantwortung
für die Arbeit der Zukunft, Frühjahrskongress der Gesellschaft für Arbeitswissenschaft,
GfA-Press, Dortmund, 2015.'
ufg: 'Hrdina, Jan/Gamber, Thilo Gerhard (2015): Einsatz von Methoden der
Wandlungsfähigkeit bei einem hybriden Montagesystem, in: Gesellschaft für Arbeitswissenschaft
e.V. (Hg.): Verantwortung für die Arbeit der Zukunft, Frühjahrskongress der
Gesellschaft für Arbeitswissenschaft, Dortmund.'
van: 'Hrdina J, Gamber TG. Einsatz von Methoden der Wandlungsfähigkeit bei einem
hybriden Montagesystem. In: Gesellschaft für Arbeitswissenschaft e.V., editor. Verantwortung
für die Arbeit der Zukunft, Frühjahrskongress der Gesellschaft für Arbeitswissenschaft.
Dortmund: GfA-Press; 2015.'
conference:
end_date: 2015-02-27
location: Karlsruhe
name: Verantwortung für die Arbeit der Zukunft, 61. Frühjahrskongress der Gesellschaft
für Arbeitswissenschaft
start_date: 2015-02-25
corporate_editor:
- Gesellschaft für Arbeitswissenschaft e.V.
date_created: 2019-01-16T15:38:34Z
date_updated: 2023-03-15T13:49:51Z
ddc:
- '330'
extern: '1'
keyword:
- hybrides System
- Montagesystem
- Niedriglohnland
- Montagekonzept
- hybrides Montagesystem
language:
- iso: ger
place: Dortmund
publication: ' Verantwortung für die Arbeit der Zukunft, Frühjahrskongress der Gesellschaft
für Arbeitswissenschaft'
publication_identifier:
isbn:
- 978-3-936804-18-8
publication_status: published
publisher: GfA-Press
status: public
title: Einsatz von Methoden der Wandlungsfähigkeit bei einem hybriden Montagesystem
type: conference
user_id: '74004'
year: 2015
...
---
_id: '665'
abstract:
- lang: eng
text: 'The requirements of assembly systems are changing, due to trends such as
shorter innovation and product lifecycles as well as an increase in the number
of product variants and product customization. Certain markets are characterized
by demand volatility and short delivery schedules. As a result of shortened product
and innovation lifecycles and demand volatility, the assembly system design should
be versatile. The aim of this paper is to demonstrate a versatile assembly system
which was jointly developed by the Fraunhofer IOSB-INA and the Ostwestfalen-Lippe
University of Applied Sciences. '
author:
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Jürgen
full_name: Jasperneite, Jürgen
id: '1899'
last_name: Jasperneite
- first_name: Florian
full_name: Schrader, Florian
id: '1937'
last_name: Schrader
- first_name: Benedikt
full_name: Lücke, Benedikt
id: '11178'
last_name: Lücke
citation:
ama: 'Hinrichsen S, Jasperneite J, Schrader F, Lücke B. Versatile Assembly Systems
- Requirements, Design Principles and Examples. In: Villmer F-J, Padoano E, Department
of Production Engineering and Management, eds. Production Engineering and Management.
Lemgo: Hochschule Ostwestfalen-Lippe; 2014:37-45.'
apa: 'Hinrichsen, S., Jasperneite, J., Schrader, F., & Lücke, B. (2014). Versatile
Assembly Systems - Requirements, Design Principles and Examples. In F.-J. Villmer,
E. Padoano, & Department of Production Engineering and Management, (Eds.),
Production Engineering and Management (pp. 37–45). Lemgo: Hochschule Ostwestfalen-Lippe.'
bjps: 'Hinrichsen S et al. (2014) Versatile Assembly Systems - Requirements,
Design Principles and Examples. In Villmer F-J, Padoano E and Department of Production
Engineering and Management, (eds), Production Engineering and Management.
Lemgo: Hochschule Ostwestfalen-Lippe, pp. 37–45.'
chicago: 'Hinrichsen, Sven, Jürgen Jasperneite, Florian Schrader, and Benedikt Lücke.
“Versatile Assembly Systems - Requirements, Design Principles and Examples.” In
Production Engineering and Management, edited by Franz-Josef Villmer, Elio
Padoano, and Department of Production Engineering and Management, 37–45. Lemgo:
Hochschule Ostwestfalen-Lippe, 2014.'
chicago-de: 'Hinrichsen, Sven, Jürgen Jasperneite, Florian Schrader und Benedikt
Lücke. 2014. Versatile Assembly Systems - Requirements, Design Principles and
Examples. In: Production Engineering and Management, hg. von Franz-Josef
Villmer, Elio Padoano, und Department of Production Engineering and Management,
37–45. Lemgo: Hochschule Ostwestfalen-Lippe.'
din1505-2-1: 'Hinrichsen, Sven ; Jasperneite, Jürgen ; Schrader,
Florian ; Lücke, Benedikt:
Versatile Assembly Systems - Requirements, Design Principles and Examples. In:
Villmer, F.-J. ; Padoano,
E. ; Department of Production Engineering
and Management, (Hrsg.): Production Engineering and Management.
Lemgo : Hochschule Ostwestfalen-Lippe, 2014, S. 37–45'
havard: 'S. Hinrichsen, J. Jasperneite, F. Schrader, B. Lücke, Versatile Assembly
Systems - Requirements, Design Principles and Examples, in: F.-J. Villmer, E.
Padoano, Department of Production Engineering and Management, (Eds.), Production
Engineering and Management, Hochschule Ostwestfalen-Lippe, Lemgo, 2014: pp. 37–45.'
ieee: S. Hinrichsen, J. Jasperneite, F. Schrader, and B. Lücke, “Versatile Assembly
Systems - Requirements, Design Principles and Examples,” in Production Engineering
and Management, Lemgo, 2014, no. 10, pp. 37–45.
mla: Hinrichsen, Sven, et al. “Versatile Assembly Systems - Requirements, Design
Principles and Examples.” Production Engineering and Management, edited
by Franz-Josef Villmer et al., no. 10, Hochschule Ostwestfalen-Lippe, 2014, pp.
37–45.
short: 'S. Hinrichsen, J. Jasperneite, F. Schrader, B. Lücke, in: F.-J. Villmer,
E. Padoano, Department of Production Engineering and Management, (Eds.), Production
Engineering and Management, Hochschule Ostwestfalen-Lippe, Lemgo, 2014, pp. 37–45.'
ufg: 'Hinrichsen, Sven et. al. (2014): Versatile Assembly Systems - Requirements,
Design Principles and Examples, in: Franz-Josef Villmer et. al. (Hgg.): Production
Engineering and Management, Lemgo, S. 37–45.'
van: 'Hinrichsen S, Jasperneite J, Schrader F, Lücke B. Versatile Assembly Systems
- Requirements, Design Principles and Examples. In: Villmer F-J, Padoano E, Department
of Production Engineering and Management, editors. Production Engineering and
Management. Lemgo: Hochschule Ostwestfalen-Lippe; 2014. p. 37–45.'
conference:
end_date: 2014-09-26
location: Lemgo
name: Proceedings 4th international conference
start_date: 2014-09-25
corporate_editor:
- Department of Production Engineering and Management,
- Hochschule Ostwestfalen-Lippe
date_created: 2019-01-16T16:07:56Z
date_updated: 2023-03-15T13:50:07Z
department:
- _id: DEP7020
- _id: DEP1305
- _id: DEP5023
- _id: DEP5019
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
issue: '10'
keyword:
- Assembly System
- Versatility
- Modularity
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fb7/fileadmin/download/labore/industrialengineering/pdf/Veroeffentlichungen/PEM_2014_Versatile_Assembly_Systems_-_Requirements__Design_Principles_and_Examples.pdf
oa: '1'
page: 37-45
place: Lemgo
publication: Production Engineering and Management
publication_status: published
publisher: Hochschule Ostwestfalen-Lippe
quality_controlled: '1'
status: public
title: Versatile Assembly Systems - Requirements, Design Principles and Examples
type: conference
user_id: '49010'
year: 2014
...
---
_id: '10068'
abstract:
- lang: eng
text: Currently, cities are confronting a multitude of challenges including climate
change, demographic change, urbanization and land subsidence. Resulting flooding,
droughts and other disturbances could lead to water shortages, severe interruptions,
hydraulic problems or underutilization of water infrastructure systems. One way
that cities can become more resilient is by diversifying their water resources
and reducing their dependency on central water infrastructures. Water infrastructure
systems consisting of decentral or semi-central partial systems would be more
resilient because a failure in these systems would only affect a small part of
the urban area. Instead of an incremental improvement of the water infrastructure,
there is a need for system innovations that will allow an adaptive development
to changing conditions and which will ensure that future sustainability challenges
are met. However, moving towards more resilient water technologies is seen as
controversial for built-up areas. To answer the question if a transformation to
a more resilient water infrastructure in built-up areas is feasible (technically
and economically), a balancing and assessment of the corresponding effects have
been done by way of comparing a “transformation” scenario with a reference scenario
“business as usual”. If one takes a long-term period of observation (70 years),
the costs balance of the scenarios “reference” and “transformation” both turn
out to be on a comparative level. By contrast, the consumption of environmental
resources in the scenario “transformation” is almost twice as low as in the “reference”.
author:
- first_name: Engelbert
full_name: Schramm, Engelbert
last_name: Schramm
- first_name: Jörg
full_name: Felmeden, Jörg
id: '81335'
last_name: Felmeden
citation:
ama: 'Schramm E, Felmeden J. Towards More Resilient Water Infrastructures. In: Zimmermann
KO, ed. Resilient Cities 2 : Cities and Adaptation to Climate Change – Proceedings
of the Global Forum 2011 . Vol 2. Local sustainability. Springer Dordrecht;
2012:177-186. doi:https://doi.org/10.1007/978-94-007-4223-9_19'
apa: 'Schramm, E., & Felmeden, J. (2012). Towards More Resilient Water Infrastructures.
In K. O. Zimmermann (Ed.), Resilient Cities 2 : Cities and Adaptation to Climate
Change – Proceedings of the Global Forum 2011 (Vol. 2, pp. 177–186). Springer
Dordrecht. https://doi.org/10.1007/978-94-007-4223-9_19'
bjps: 'Schramm E and Felmeden J (2012) Towards More Resilient Water Infrastructures.
In Zimmermann KO (ed.), Resilient Cities 2 : Cities and Adaptation to Climate
Change – Proceedings of the Global Forum 2011 , vol. 2. Dordrecht: Springer
Dordrecht, pp. 177–186.'
chicago: 'Schramm, Engelbert, and Jörg Felmeden. “Towards More Resilient Water Infrastructures.”
In Resilient Cities 2 : Cities and Adaptation to Climate Change – Proceedings
of the Global Forum 2011 , edited by Karl Otto Zimmermann, 2:177–86. Local
Sustainability. Dordrecht: Springer Dordrecht, 2012. https://doi.org/10.1007/978-94-007-4223-9_19.'
chicago-de: 'Schramm, Engelbert und Jörg Felmeden. 2012. Towards More Resilient
Water Infrastructures. In: Resilient Cities 2 : Cities and Adaptation to Climate
Change – Proceedings of the Global Forum 2011 , hg. von Karl Otto Zimmermann,
2:177–186. Local sustainability. Dordrecht: Springer Dordrecht. doi:https://doi.org/10.1007/978-94-007-4223-9_19,
.'
din1505-2-1: 'Schramm, Engelbert ;
Felmeden, Jörg: Towards More Resilient
Water Infrastructures. In: Zimmermann,
K. O. (Hrsg.): Resilient Cities 2 : Cities and Adaptation to Climate
Change – Proceedings of the Global Forum 2011 , Local sustainability.
Bd. 2. Dordrecht : Springer Dordrecht, 2012, S. 177–186'
havard: 'E. Schramm, J. Felmeden, Towards More Resilient Water Infrastructures,
in: K.O. Zimmermann (Ed.), Resilient Cities 2 : Cities and Adaptation to Climate
Change – Proceedings of the Global Forum 2011 , Springer Dordrecht, Dordrecht,
2012: pp. 177–186.'
ieee: 'E. Schramm and J. Felmeden, “Towards More Resilient Water Infrastructures,”
in Resilient Cities 2 : Cities and Adaptation to Climate Change – Proceedings
of the Global Forum 2011 , vol. 2, K. O. Zimmermann, Ed. Dordrecht: Springer
Dordrecht, 2012, pp. 177–186. doi: https://doi.org/10.1007/978-94-007-4223-9_19.'
mla: 'Schramm, Engelbert, and Jörg Felmeden. “Towards More Resilient Water Infrastructures.”
Resilient Cities 2 : Cities and Adaptation to Climate Change – Proceedings
of the Global Forum 2011 , edited by Karl Otto Zimmermann, vol. 2, Springer
Dordrecht, 2012, pp. 177–86, https://doi.org/10.1007/978-94-007-4223-9_19.'
short: 'E. Schramm, J. Felmeden, in: K.O. Zimmermann (Ed.), Resilient Cities 2 :
Cities and Adaptation to Climate Change – Proceedings of the Global Forum 2011
, Springer Dordrecht, Dordrecht, 2012, pp. 177–186.'
ufg: 'Schramm, Engelbert/Felmeden, Jörg: Towards More Resilient Water Infrastructures,
in: Zimmermann, Karl Otto (Hg.): Resilient Cities 2 : Cities and Adaptation
to Climate Change – Proceedings of the Global Forum 2011 , Bd. 2, Dordrecht 2012
(Local sustainability), S. 177–186.'
van: 'Schramm E, Felmeden J. Towards More Resilient Water Infrastructures. In: Zimmermann
KO, editor. Resilient Cities 2 : Cities and Adaptation to Climate Change – Proceedings
of the Global Forum 2011 . Dordrecht: Springer Dordrecht; 2012. p. 177–86. (Local
sustainability; vol. 2).'
conference:
end_date: 2011-06-05
location: Bonn
name: 'Proceedings of the Global Forum 2011 '
start_date: 2011-06-03
date_created: 2023-06-30T06:30:30Z
date_updated: 2023-07-05T14:53:26Z
department:
- _id: DEP3021
doi: https://doi.org/10.1007/978-94-007-4223-9_19
editor:
- first_name: Karl Otto
full_name: Zimmermann, Karl Otto
last_name: Zimmermann
extern: '1'
intvolume: ' 2'
keyword:
- Climate change
- Eco-efficiency analysis
- System innovations
- Vulnerability
- Water infrastructure
language:
- iso: eng
page: 177–186
place: Dordrecht
publication: 'Resilient Cities 2 : Cities and Adaptation to Climate Change – Proceedings
of the Global Forum 2011 '
publication_identifier:
eisbn:
- '978-94-007-4223-9 '
eissn:
- '2211-2790 '
isbn:
- 978-94-007-9776-5
- 978-94-007-4222-2
issn:
- '2211-2782 '
publication_status: published
publisher: Springer Dordrecht
related_material:
link:
- relation: confirmation
url: https://www.springer.com/us/book/9789400742222
series_title: Local sustainability
status: public
title: Towards More Resilient Water Infrastructures
type: book_chapter
user_id: '83781'
volume: 2
year: '2012'
...
---
_id: '2102'
abstract:
- lang: ger
text: Die Zustandsüberwachung erfolgt derzeit in der Regel durch Einsatz spezieller Sensorik,
bspw. durch Vibrationsmessungen. Außerdem werden die Antriebe lediglich isoliert
betrachtet, eine Zusammenführung anfallender Informationen eines räumlich verteilten Antriebsverbunds findet meist
nicht statt. Im Folgenden wird ein neuartiges Motor-as-Sensor-Konzept vorgeschlagen
und validiert, das eine antizipatorische Zustandsüberwachung ohne Einsatz zusätzlicher
Sensorik allein durch Verarbeitung der phasenbezogenen Motorströme ermöglicht. Zusätzlich wird ein Informationsfusionskonzept vorge-stellt,
das die Informationen aller im Verbund beteiligten Antriebe zusammenführt, um
darüber eine mit weniger Unsicherheiten behaftete Aussage über den Zustand einer
Ap-plikation herbeizuführen. Das Hauptaugenmerk liegt hierbei insbesondere auf der Beherrschung der anfallenden riesigen Datenmengen, die zur Verarbeitung in eingebetteten
Systemen reduziert werden müssen.
author:
- first_name: Karl
full_name: Voth, Karl
last_name: Voth
- first_name: Alexander
full_name: Dicks, Alexander
id: '1853'
last_name: Dicks
- first_name: Volker
full_name: Lohweg, Volker
id: '1804'
last_name: Lohweg
orcid: 0000-0002-3325-7887
citation:
ama: 'Voth K, Dicks A, Lohweg V. Konfliktlösende Informationsfusion zur Maschinendiagnose
am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft
Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund.
In: ; 2011.'
apa: Voth, K., Dicks, A., & Lohweg, V. (2011). Konfliktlösende Informationsfusion
zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational
Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30.
November - 02. Dezember 2011, Dortmund.
bjps: Voth K, Dicks A and Lohweg V (2011) Konfliktlösende Informationsfusion
zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational
Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30.
November - 02. Dezember 2011, Dortmund.
chicago: Voth, Karl, Alexander Dicks, and Volker Lohweg. “Konfliktlösende Informationsfusion
zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational
Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30.
November - 02. Dezember 2011, Dortmund,” 2011.
chicago-de: 'Voth, Karl, Alexander Dicks und Volker Lohweg. 2011. Konfliktlösende
Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21.
Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik
(GMA), 30. November - 02. Dezember 2011, Dortmund. In: .'
din1505-2-1: 'Voth, Karl ; Dicks,
Alexander ; Lohweg, Volker:
Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen,
21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik
(GMA), 30. November - 02. Dezember 2011, Dortmund. In: , 2011'
havard: 'K. Voth, A. Dicks, V. Lohweg, Konfliktlösende Informationsfusion zur Maschinendiagnose
am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft
Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund,
in: 2011.'
ieee: K. Voth, A. Dicks, and V. Lohweg, “Konfliktlösende Informationsfusion zur
Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational
Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30.
November - 02. Dezember 2011, Dortmund,” 2011.
mla: Voth, Karl, et al. Konfliktlösende Informationsfusion zur Maschinendiagnose
am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft
Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund.
2011.
short: 'K. Voth, A. Dicks, V. Lohweg, in: 2011.'
ufg: 'Voth, Karl et. al. (2011): Konfliktlösende Informationsfusion zur Maschinendiagnose
am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft
Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund,
in: .'
van: Voth K, Dicks A, Lohweg V. Konfliktlösende Informationsfusion zur Maschinendiagnose
am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft
Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund.
In 2011.
date_created: 2019-12-02T14:32:58Z
date_updated: 2023-03-15T13:49:38Z
department:
- _id: DEP5023
keyword:
- Sensor- und Informationsfusion
- elektrischer Antrieb
- Cyber-Physical System
- Industrie 4.0
- Big Data
language:
- iso: ger
publication_status: published
status: public
title: Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen,
21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik
(GMA), 30. November - 02. Dezember 2011, Dortmund
type: conference
user_id: '45673'
year: 2011
...
---
_id: '4489'
abstract:
- lang: eng
text: In this paper we delineate and compare the functional and structural potential
but also shortcomings of two Ambient Assisted Living (AAL) systems, which aim
at providing remote care for elder adults living independently at home. One system,
a personal emergency response system, is already in use, the other system, the
Future Care Lab, presents a holistic tele-medical care setting, which is currently
in its conceptualization and test phase at RWTH Aachen University. By learning
from the experience with a well-established system in both, restrictions and benefits,
implications for a user-centred development for future telemedical systems can
be derived.
author:
- first_name: Shirley
full_name: Beul, Shirley
last_name: Beul
- first_name: Lars
full_name: Klack, Lars
last_name: Klack
- first_name: Kai
full_name: Kasugai, Kai
last_name: Kasugai
- first_name: Christina
full_name: Möllering, Christina
last_name: Möllering
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
- first_name: Wiktoria
full_name: Wilkowska, Wiktoria
last_name: Wilkowska
- first_name: Martina
full_name: Ziefle, Martina
last_name: Ziefle
citation:
ama: 'Beul S, Klack L, Kasugai K, et al. Between Innovation and Daily Practice in
the Development of AAL Systems: Learning from the Experience with Today’s Systems.
In: Szomszor M, Kostkova P, eds. Electronic Healthcare. Vol 69. Lecture
Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications
Engineering. ; 2010:111-118. doi:10.1007/978-3-642-23635-8_14'
apa: 'Beul, S., Klack, L., Kasugai, K., Möllering, C., Röcker, C., Wilkowska, W.,
& Ziefle, M. (2010). Between Innovation and Daily Practice in the Development
of AAL Systems: Learning from the Experience with Today’s Systems. In M. Szomszor
& P. Kostkova (Eds.), Electronic Healthcare (Vol. 69, pp. 111–118).
Casablanca, Morocco. https://doi.org/10.1007/978-3-642-23635-8_14'
bjps: 'Beul S et al. (2010) Between Innovation and Daily Practice
in the Development of AAL Systems: Learning from the Experience with Today’s Systems.
In Szomszor M and Kostkova P (eds), Electronic Healthcare, vol. 69. pp.
111–118.'
chicago: 'Beul, Shirley, Lars Klack, Kai Kasugai, Christina Möllering, Carsten Röcker,
Wiktoria Wilkowska, and Martina Ziefle. “Between Innovation and Daily Practice
in the Development of AAL Systems: Learning from the Experience with Today’s Systems.”
In Electronic Healthcare, edited by Martin Szomszor and Patty Kostkova,
69:111–18. Lecture Notes of the Institute for Computer Sciences, Social Informatics
and Telecommunications Engineering, 2010. https://doi.org/10.1007/978-3-642-23635-8_14.'
chicago-de: 'Beul, Shirley, Lars Klack, Kai Kasugai, Christina Möllering, Carsten
Röcker, Wiktoria Wilkowska und Martina Ziefle. 2010. Between Innovation and Daily
Practice in the Development of AAL Systems: Learning from the Experience with
Today’s Systems. In: Electronic Healthcare, hg. von Martin Szomszor und
Patty Kostkova, 69:111–118. Lecture Notes of the Institute for Computer Sciences,
Social Informatics and Telecommunications Engineering. doi:10.1007/978-3-642-23635-8_14,
.'
din1505-2-1: 'Beul, Shirley ; Klack, Lars ; Kasugai,
Kai ; Möllering, Christina
; Röcker, Carsten ; Wilkowska,
Wiktoria ; Ziefle, Martina:
Between Innovation and Daily Practice in the Development of AAL Systems: Learning
from the Experience with Today’s Systems. In: Szomszor,
M. ; Kostkova, P. (Hrsg.):
Electronic Healthcare, Lecture Notes of the Institute for Computer
Sciences, Social Informatics and Telecommunications Engineering. Bd. 69, 2010,
S. 111–118'
havard: 'S. Beul, L. Klack, K. Kasugai, C. Möllering, C. Röcker, W. Wilkowska, M.
Ziefle, Between Innovation and Daily Practice in the Development of AAL Systems:
Learning from the Experience with Today’s Systems, in: M. Szomszor, P. Kostkova
(Eds.), Electronic Healthcare, 2010: pp. 111–118.'
ieee: 'S. Beul et al., “Between Innovation and Daily Practice in the Development
of AAL Systems: Learning from the Experience with Today’s Systems,” in Electronic
Healthcare, Casablanca, Morocco, 2010, vol. 69, pp. 111–118.'
mla: 'Beul, Shirley, et al. “Between Innovation and Daily Practice in the Development
of AAL Systems: Learning from the Experience with Today’s Systems.” Electronic
Healthcare, edited by Martin Szomszor and Patty Kostkova, vol. 69, 2010,
pp. 111–18, doi:10.1007/978-3-642-23635-8_14.'
short: 'S. Beul, L. Klack, K. Kasugai, C. Möllering, C. Röcker, W. Wilkowska, M.
Ziefle, in: M. Szomszor, P. Kostkova (Eds.), Electronic Healthcare, 2010, pp.
111–118.'
ufg: 'Beul, Shirley et. al. (2010): Between Innovation and Daily Practice
in the Development of AAL Systems: Learning from the Experience with Today’s Systems,
in: Martin Szomszor/Patty Kostkova (Hgg.): Electronic Healthcare (=
Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications
Engineering 69), S. 111–118.'
van: 'Beul S, Klack L, Kasugai K, Möllering C, Röcker C, Wilkowska W, et al. Between
Innovation and Daily Practice in the Development of AAL Systems: Learning from
the Experience with Today’s Systems. In: Szomszor M, Kostkova P, editors. Electronic
Healthcare. 2010. p. 111–8. ( Lecture Notes of the Institute for Computer Sciences,
Social Informatics and Telecommunications Engineering; vol. 69).'
conference:
end_date: 2010-12-15
location: Casablanca, Morocco
name: Third International Conference, eHealth 2010
start_date: 2010-12-13
date_created: 2021-01-21T09:21:19Z
date_updated: 2023-03-15T13:49:53Z
department:
- _id: DEP5023
doi: 10.1007/978-3-642-23635-8_14
editor:
- first_name: 'Martin '
full_name: 'Szomszor, Martin '
last_name: Szomszor
- first_name: 'Patty '
full_name: 'Kostkova, Patty '
last_name: Kostkova
extern: '1'
intvolume: ' 69'
keyword:
- eHealth
- Ambient Assisted Living Telemonitoring
- Telecare
- Future Care Lab
- Personal Emergency Response System
- PERS
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 111-118
publication: Electronic Healthcare
publication_identifier:
eisbn:
- 978-3-642-23635-8
isbn:
- '978-3-642-23634-1 '
publication_status: published
series_title: ' Lecture Notes of the Institute for Computer Sciences, Social Informatics
and Telecommunications Engineering'
status: public
title: 'Between Innovation and Daily Practice in the Development of AAL Systems: Learning
from the Experience with Today’s Systems'
type: conference
user_id: '15514'
volume: 69
year: 2010
...
---
_id: '486'
abstract:
- lang: eng
text: Growing market demands on enterprises and the resulting challenges for their
organization have been discussed for many years now. The flexibilty and mutability
of an enterprise are thereby considered as a significant factor for success.
author:
- first_name: Gert
full_name: Zülch, Gert
last_name: Zülch
- first_name: Thilo Gerhard
full_name: Gamber, Thilo Gerhard
id: '71451'
last_name: Gamber
- first_name: Patricia
full_name: Stock, Patricia
last_name: Stock
citation:
ama: 'Zülch G, Gamber TG, Stock P. Methodology for the Analysis of Simulation-Based
Decision-Making in the Manufacturing Area. In: Olhager J, Persson F, eds. Advances
in Production Management Systems. New York: Springer; 2007:337-344.'
apa: 'Zülch, G., Gamber, T. G., & Stock, P. (2007). Methodology for the Analysis
of Simulation-Based Decision-Making in the Manufacturing Area. In J. Olhager &
F. Persson (Eds.), Advances in Production Management Systems (pp. 337–344).
New York: Springer.'
bjps: 'Zülch G, Gamber TG and Stock P (2007) Methodology for the Analysis
of Simulation-Based Decision-Making in the Manufacturing Area. In Olhager J and
Persson F (eds), Advances in Production Management Systems. New York: Springer,
pp. 337–344.'
chicago: 'Zülch, Gert, Thilo Gerhard Gamber, and Patricia Stock. “Methodology for
the Analysis of Simulation-Based Decision-Making in the Manufacturing Area.” In
Advances in Production Management Systems, edited by Jan Olhager and Fredrik
Persson, 337–44. New York: Springer, 2007.'
chicago-de: 'Zülch, Gert, Thilo Gerhard Gamber und Patricia Stock. 2007. Methodology
for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area.
In: Advances in Production Management Systems, hg. von Jan Olhager und
Fredrik Persson, 337–344. New York: Springer.'
din1505-2-1: 'Zülch, Gert ; Gamber, Thilo Gerhard ; Stock,
Patricia: Methodology for the Analysis of Simulation-Based Decision-Making
in the Manufacturing Area. In: Olhager,
J. ; Persson, F. (Hrsg.):
Advances in Production Management Systems. New York : Springer, 2007, S. 337–344'
havard: 'G. Zülch, T.G. Gamber, P. Stock, Methodology for the Analysis of Simulation-Based
Decision-Making in the Manufacturing Area, in: J. Olhager, F. Persson (Eds.),
Advances in Production Management Systems, Springer, New York, 2007: pp. 337–344.'
ieee: G. Zülch, T. G. Gamber, and P. Stock, “Methodology for the Analysis of Simulation-Based
Decision-Making in the Manufacturing Area,” in Advances in Production Management
Systems, Linköping, 2007, pp. 337–344.
mla: Zülch, Gert, et al. “Methodology for the Analysis of Simulation-Based Decision-Making
in the Manufacturing Area.” Advances in Production Management Systems,
edited by Jan Olhager and Fredrik Persson, Springer, 2007, pp. 337–44.
short: 'G. Zülch, T.G. Gamber, P. Stock, in: J. Olhager, F. Persson (Eds.), Advances
in Production Management Systems, Springer, New York, 2007, pp. 337–344.'
ufg: 'Zülch, Gert et. al. (2007): Methodology for the Analysis of Simulation-Based
Decision-Making in the Manufacturing Area, in: Jan Olhager/Fredrik Persson (Hgg.):
Advances in Production Management Systems, New York, S. 337–344.'
van: 'Zülch G, Gamber TG, Stock P. Methodology for the Analysis of Simulation-Based
Decision-Making in the Manufacturing Area. In: Olhager J, Persson F, editors.
Advances in Production Management Systems. New York: Springer; 2007. p. 337–44.'
conference:
end_date: 2007-09-19
location: Linköping
name: International IFIP TC 5, WG 5.7 Conference on Advances in Production Management
Systems (APMS 2007)
start_date: 2007-09-17
date_created: 2019-01-30T07:51:48Z
date_updated: 2023-03-15T13:49:56Z
editor:
- first_name: Jan
full_name: Olhager, Jan
last_name: Olhager
- first_name: Fredrik
full_name: Persson, Fredrik
last_name: Persson
extern: '1'
keyword:
- production planning and control
- decision-making system
- personnel-oriented simulation
language:
- iso: eng
page: 337-344
place: New York
publication: Advances in Production Management Systems
publication_identifier:
isbn:
- 978-0-387-74157-4
publication_status: published
publisher: Springer
status: public
title: Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing
Area
type: conference
user_id: '74004'
year: 2007
...
---
_id: '4813'
abstract:
- lang: eng
text: This paper presents a formative multi-method evaluation on future gaming systems.
Following a scenario-driven approach, quantitative and qualitative methods are
employed to elicit feedback from different target user populations. Based on the
results of the different evaluation parts, a set of design requirements for future
home entertainment systems is derived. These requirements are then used to guide
the development process of a ubiquitous computing gaming platform. To demonstrate
the usefulness of the gaming platform, a sample application is discussed, which
is described in the last section of this paper.
author:
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
- first_name: Carsten
full_name: Magerkurth, Carsten
last_name: Magerkurth
- first_name: Maral
full_name: Haar, Maral
last_name: Haar
citation:
ama: 'Röcker C, Magerkurth C, Haar M. User Interfaces for Pervasive Games: Experiences
of a Formative Multi-Method Evaluation and its Implications for System Development.
In: Stephanidis C, Pieper M, eds. Universal Access in Ambient Intelligence
Environments : 9th ERCIM Workshop on User Interfaces for All. Vol 4397. Lecture
Notes in Computer Science. Berlin: Springer; 2006:352-368. doi:10.1007/978-3-540-71025-7_23'
apa: 'Röcker, C., Magerkurth, C., & Haar, M. (2006). User Interfaces for Pervasive
Games: Experiences of a Formative Multi-Method Evaluation and its Implications
for System Development. In C. Stephanidis & M. Pieper (Eds.), Universal
Access in Ambient Intelligence Environments : 9th ERCIM Workshop on User Interfaces
for All (Vol. 4397, pp. 352–368). Berlin: Springer. https://doi.org/10.1007/978-3-540-71025-7_23'
bjps: 'Röcker C, Magerkurth C and Haar M (2006) User Interfaces for Pervasive
Games: Experiences of a Formative Multi-Method Evaluation and Its Implications
for System Development. In Stephanidis C and Pieper M (eds), Universal Access
in Ambient Intelligence Environments : 9th ERCIM Workshop on User Interfaces for
All, vol. 4397. Berlin: Springer, pp. 352–368.'
chicago: 'Röcker, Carsten, Carsten Magerkurth, and Maral Haar. “User Interfaces
for Pervasive Games: Experiences of a Formative Multi-Method Evaluation and Its
Implications for System Development.” In Universal Access in Ambient Intelligence
Environments : 9th ERCIM Workshop on User Interfaces for All, edited by Constantine
Stephanidis and Michael Pieper, 4397:352–68. Lecture Notes in Computer Science.
Berlin: Springer, 2006. https://doi.org/10.1007/978-3-540-71025-7_23.'
chicago-de: 'Röcker, Carsten, Carsten Magerkurth und Maral Haar. 2006. User Interfaces
for Pervasive Games: Experiences of a Formative Multi-Method Evaluation and its
Implications for System Development. In: Universal Access in Ambient Intelligence
Environments : 9th ERCIM Workshop on User Interfaces for All, hg. von Constantine
Stephanidis und Michael Pieper, 4397:352–368. Lecture Notes in Computer Science.
Berlin: Springer. doi:10.1007/978-3-540-71025-7_23,
.'
din1505-2-1: 'Röcker, Carsten ; Magerkurth, Carsten ; Haar,
Maral: User Interfaces for Pervasive Games: Experiences of a Formative
Multi-Method Evaluation and its Implications for System Development. In: Stephanidis, C. ; Pieper,
M. (Hrsg.): Universal Access in Ambient Intelligence Environments :
9th ERCIM Workshop on User Interfaces for All, Lecture Notes in Computer
Science. Bd. 4397. Berlin : Springer, 2006, S. 352–368'
havard: 'C. Röcker, C. Magerkurth, M. Haar, User Interfaces for Pervasive Games:
Experiences of a Formative Multi-Method Evaluation and its Implications for System
Development, in: C. Stephanidis, M. Pieper (Eds.), Universal Access in Ambient
Intelligence Environments : 9th ERCIM Workshop on User Interfaces for All, Springer,
Berlin, 2006: pp. 352–368.'
ieee: 'C. Röcker, C. Magerkurth, and M. Haar, “User Interfaces for Pervasive Games:
Experiences of a Formative Multi-Method Evaluation and its Implications for System
Development,” in Universal Access in Ambient Intelligence Environments : 9th
ERCIM Workshop on User Interfaces for All, Königswinter (Bonn), Germany, 2006,
vol. 4397, pp. 352–368.'
mla: 'Röcker, Carsten, et al. “User Interfaces for Pervasive Games: Experiences
of a Formative Multi-Method Evaluation and Its Implications for System Development.”
Universal Access in Ambient Intelligence Environments : 9th ERCIM Workshop
on User Interfaces for All, edited by Constantine Stephanidis and Michael
Pieper, vol. 4397, Springer, 2006, pp. 352–68, doi:10.1007/978-3-540-71025-7_23.'
short: 'C. Röcker, C. Magerkurth, M. Haar, in: C. Stephanidis, M. Pieper (Eds.),
Universal Access in Ambient Intelligence Environments : 9th ERCIM Workshop on
User Interfaces for All, Springer, Berlin, 2006, pp. 352–368.'
ufg: 'Röcker, Carsten et. al. (2006): User Interfaces for Pervasive Games:
Experiences of a Formative Multi-Method Evaluation and its Implications for System
Development, in: Constantine Stephanidis/Michael Pieper (Hgg.): Universal Access
in Ambient Intelligence Environments : 9th ERCIM Workshop on User Interfaces for
All (=Lecture Notes in Computer Science 4397), Berlin, S. 352–368.'
van: 'Röcker C, Magerkurth C, Haar M. User Interfaces for Pervasive Games: Experiences
of a Formative Multi-Method Evaluation and its Implications for System Development.
In: Stephanidis C, Pieper M, editors. Universal Access in Ambient Intelligence
Environments : 9th ERCIM Workshop on User Interfaces for All. Berlin: Springer;
2006. p. 352–68. (Lecture Notes in Computer Science; vol. 4397).'
conference:
end_date: 2006+09-28
location: Königswinter (Bonn), Germany
name: 9th ERCIM Workshop on User Interfaces for All
start_date: 2006-09-27
date_created: 2021-02-02T09:56:54Z
date_updated: 2023-03-15T13:49:55Z
department:
- _id: DEP5023
doi: 10.1007/978-3-540-71025-7_23
editor:
- first_name: Constantine
full_name: Stephanidis, Constantine
last_name: Stephanidis
- first_name: Michael
full_name: Pieper, Michael
last_name: Pieper
extern: '1'
intvolume: ' 4397'
keyword:
- User Interfaces
- Pervasive Games
- Evaluation
- System Development
- Tangible User Interfaces
- Human Computer Interaction
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 352-368
place: Berlin
publication: 'Universal Access in Ambient Intelligence Environments : 9th ERCIM Workshop
on User Interfaces for All'
publication_identifier:
eisbn:
- 978-3-540-71025-7
isbn:
- 978-3-540-71024-0
publication_status: published
publisher: Springer
series_title: Lecture Notes in Computer Science
status: public
title: 'User Interfaces for Pervasive Games: Experiences of a Formative Multi-Method
Evaluation and its Implications for System Development'
type: conference
user_id: '15514'
volume: 4397
year: 2006
...