---
_id: '4303'
abstract:
- lang: eng
text: The increasing demand to customize products affects production workers in
many industries, as assembly tasks become more complex due to higher product variety.
Assistive systems providing instructions at the workplace have been proposed to
overcome increasing cognitive demand during assembly tasks. Commercially available
assistive systems provide spatially registered instructions, either by using in-situ
projections or head-mounted displays (HMDs). As there is little empirical knowledge
about the individual advantages and disadvantages of both approaches, we are interested
in comparing both types of systems. Through a user study at a manual assembly
workplace, we compare both approaches to a paper baseline. Our results reveal
that both in-situ instructions and paper instructions lead to significantly faster
task completion times and significantly fewer errors than HMDs. Using additional
questionnaires and interviews, we are able to identify the shortcomings of HMD-based
instructions and discuss the possibilities of using flexible in-situ instructions
for worker assistance.
author:
- first_name: Sebastian
full_name: Büttner, Sebastian
id: '61868'
last_name: Büttner
- first_name: Markus
full_name: Funk, Markus
last_name: Funk
- first_name: Oliver
full_name: Sand, Oliver
last_name: Sand
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Büttner S, Funk M, Sand O, Röcker C. Using Head-Mounted Displays and In-Situ
Projection for Assistive Systems : A Comparison. In: 9th ACM International
Conference on PErvasive Technologies Related to Assistive Environments (PETRA
’16) . Korfu, Griechenland: ACM; 2016:1-8. doi:10.1145/2910674.2910679'
apa: 'Büttner, S., Funk, M., Sand, O., & Röcker, C. (2016). Using Head-Mounted
Displays and In-Situ Projection for Assistive Systems : A Comparison. In 9th
ACM International Conference on PErvasive Technologies Related to Assistive Environments
(PETRA ’16) (pp. 1–8). Korfu, Griechenland: ACM. https://doi.org/10.1145/2910674.2910679'
bjps: 'Büttner S et al. (2016) Using Head-Mounted Displays and In-Situ
Projection for Assistive Systems : A Comparison. 9th ACM International Conference
on PErvasive Technologies Related to Assistive Environments (PETRA ’16) .
Korfu, Griechenland: ACM, pp. 1–8.'
chicago: 'Büttner, Sebastian, Markus Funk, Oliver Sand, and Carsten Röcker. “Using
Head-Mounted Displays and In-Situ Projection for Assistive Systems : A Comparison.”
In 9th ACM International Conference on PErvasive Technologies Related to Assistive
Environments (PETRA ’16) , 1–8. Korfu, Griechenland: ACM, 2016. https://doi.org/10.1145/2910674.2910679.'
chicago-de: 'Büttner, Sebastian, Markus Funk, Oliver Sand und Carsten Röcker. 2016.
Using Head-Mounted Displays and In-Situ Projection for Assistive Systems : A Comparison.
In: 9th ACM International Conference on PErvasive Technologies Related to Assistive
Environments (PETRA ’16) , 1–8. Korfu, Griechenland: ACM. doi:10.1145/2910674.2910679,
.'
din1505-2-1: 'Büttner, Sebastian ;
Funk, Markus ; Sand,
Oliver ; Röcker, Carsten:
Using Head-Mounted Displays and In-Situ Projection for Assistive Systems : A Comparison.
In: 9th ACM International Conference on PErvasive Technologies Related to Assistive
Environments (PETRA ’16) . Korfu, Griechenland : ACM, 2016, S. 1–8'
havard: 'S. Büttner, M. Funk, O. Sand, C. Röcker, Using Head-Mounted Displays and
In-Situ Projection for Assistive Systems : A Comparison, in: 9th ACM International
Conference on PErvasive Technologies Related to Assistive Environments (PETRA
’16) , ACM, Korfu, Griechenland, 2016: pp. 1–8.'
ieee: 'S. Büttner, M. Funk, O. Sand, and C. Röcker, “Using Head-Mounted Displays
and In-Situ Projection for Assistive Systems : A Comparison,” in 9th ACM International
Conference on PErvasive Technologies Related to Assistive Environments (PETRA
’16) , Corfu; Greece , 2016, pp. 1–8.'
mla: 'Büttner, Sebastian, et al. “Using Head-Mounted Displays and In-Situ Projection
for Assistive Systems : A Comparison.” 9th ACM International Conference on
PErvasive Technologies Related to Assistive Environments (PETRA ’16) , ACM,
2016, pp. 1–8, doi:10.1145/2910674.2910679.'
short: 'S. Büttner, M. Funk, O. Sand, C. Röcker, in: 9th ACM International Conference
on PErvasive Technologies Related to Assistive Environments (PETRA ’16) , ACM,
Korfu, Griechenland, 2016, pp. 1–8.'
ufg: 'Büttner, Sebastian et. al. (2016): Using Head-Mounted Displays and
In-Situ Projection for Assistive Systems : A Comparison, in: 9th ACM International
Conference on PErvasive Technologies Related to Assistive Environments (PETRA
’16) , Korfu, Griechenland, S. 1–8.'
van: 'Büttner S, Funk M, Sand O, Röcker C. Using Head-Mounted Displays and In-Situ
Projection for Assistive Systems : A Comparison. In: 9th ACM International Conference
on PErvasive Technologies Related to Assistive Environments (PETRA ’16) . Korfu,
Griechenland: ACM; 2016. p. 1–8.'
conference:
end_date: 2016-07-01
location: 'Corfu; Greece '
name: 'PETRA ''16: Proceedings of the 9th ACM International Conference on PErvasive
Technologies Related to Assistive Environments'
start_date: 2016-06-29
date_created: 2020-12-22T14:11:07Z
date_updated: 2023-03-15T13:49:51Z
department:
- _id: DEP5023
doi: 10.1145/2910674.2910679
keyword:
- Spatial Augmented Reality
- Industrial Augmented Reality
- Projection-based Augmented Reality
- Head-Mounted Display
- Manufacturing
- Assistive System
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 1-8
place: Korfu, Griechenland
publication: '9th ACM International Conference on PErvasive Technologies Related to
Assistive Environments (PETRA ''16) '
publication_identifier:
isbn:
- 978-1-4503-4337-4
publication_status: published
publisher: ACM
status: public
title: 'Using Head-Mounted Displays and In-Situ Projection for Assistive Systems :
A Comparison'
type: conference
user_id: '15514'
year: 2016
...
---
_id: '11142'
abstract:
- lang: eng
text: This dissertation proposes and investigates an isochronous wireless network
for industrial control applications with guaranteed latencies and jitter. Based
on a requirements analysis of real industrial applications and the characterisation
of the wireless channel, the solution approach is developed. It consists of a
TDMA-based medium access control, a dynamic resource allocation and the provision
of a global time base for the wired and the wireless network. Due to the global
time base, the solution approach allows a seamless and synchronous integration
into existing wired Real-time Ethernet systems.
author:
- first_name: Henning
full_name: Trsek, Henning
last_name: Trsek
citation:
ama: Trsek H. Isochronous Wireless Network for Real-Time Communication in Industrial
Automation. Springer ; 2016. doi:10.1007/978-3-662-49158-4
apa: Trsek, H. (2016). Isochronous Wireless Network for Real-time Communication
in Industrial Automation. Springer . https://doi.org/10.1007/978-3-662-49158-4
bjps: 'Trsek H (2016) Isochronous Wireless Network for Real-Time Communication
in Industrial Automation. Berlin, Heidelberg: Springer .'
chicago: 'Trsek, Henning. Isochronous Wireless Network for Real-Time Communication
in Industrial Automation. Technologien Für Die Intelligente Automation. Berlin,
Heidelberg: Springer , 2016. https://doi.org/10.1007/978-3-662-49158-4.'
chicago-de: 'Trsek, Henning. 2016. Isochronous Wireless Network for Real-time
Communication in Industrial Automation. Technologien für die intelligente
Automation. Berlin, Heidelberg: Springer . doi:10.1007/978-3-662-49158-4,
.'
din1505-2-1: 'Trsek, Henning: Isochronous
Wireless Network for Real-time Communication in Industrial Automation, Technologien
für die intelligente Automation. Berlin, Heidelberg : Springer , 2016'
havard: H. Trsek, Isochronous Wireless Network for Real-time Communication in Industrial
Automation, Springer , Berlin, Heidelberg, 2016.
ieee: 'H. Trsek, Isochronous Wireless Network for Real-time Communication in
Industrial Automation. Berlin, Heidelberg: Springer , 2016. doi: 10.1007/978-3-662-49158-4.'
mla: Trsek, Henning. Isochronous Wireless Network for Real-Time Communication
in Industrial Automation. Springer , 2016, https://doi.org/10.1007/978-3-662-49158-4.
short: H. Trsek, Isochronous Wireless Network for Real-Time Communication in Industrial
Automation, Springer , Berlin, Heidelberg, 2016.
ufg: 'Trsek, Henning: Isochronous Wireless Network for Real-time Communication
in Industrial Automation, Berlin, Heidelberg 2016 (Technologien für die intelligente
Automation).'
van: 'Trsek H. Isochronous Wireless Network for Real-time Communication in Industrial
Automation. Berlin, Heidelberg: Springer ; 2016. (Technologien für die intelligente
Automation).'
date_created: 2024-03-01T08:09:01Z
date_updated: 2024-03-05T14:34:59Z
department:
- _id: DEP5023
doi: 10.1007/978-3-662-49158-4
keyword:
- industrial wireless system
- wireless real-time communication
- deterministic medium access control
- isochronous WLAN
- industrial automation
language:
- iso: eng
place: Berlin, Heidelberg
publication_identifier:
eisbn:
- 978-3-662-49158-4
eissn:
- 2522-8587
isbn:
- 978-3-662-49157-7
issn:
- '2522-8579 '
publication_status: published
publisher: 'Springer '
series_title: Technologien für die intelligente Automation
status: public
title: Isochronous Wireless Network for Real-time Communication in Industrial Automation
type: dissertation
user_id: '83781'
year: '2016'
...
---
_id: '2128'
abstract:
- lang: eng
text: We present the concept of a perceptive motor in terms of a cyber-physical
system (CPS). A model application monitoring a knitting process was developed,
where the take-off of the produced fabric is controlled by an electric motor.
The idea is to equip a synchronous motor with a smart camera and appropriate image
processing hard- and software components. Subsequently, the characteristics of
knitted fabric are analysed by machine-learning (ML) methods. Our concept includes
motor-current analysis and image processing. The aim is to implement an assistance
system for the industrial large circular knitting process. An assistance system
will help to shorten the retrofitting process. The concept is based on a low cost
hardware approach for a smart camera, and stems from the recent development of
image processing applications for mobile devices [1–4].
author:
- first_name: Kristijan
full_name: Vukovic, Kristijan
last_name: Vukovic
- first_name: Kristina
full_name: Simonis, Kristina
last_name: Simonis
- first_name: Helene
full_name: Dörksen, Helene
id: '46416'
last_name: Dörksen
- first_name: Volker
full_name: Lohweg, Volker
id: '1804'
last_name: Lohweg
orcid: 0000-0002-3325-7887
citation:
ama: 'Vukovic K, Simonis K, Dörksen H, Lohweg V. Efficient Image Processing System
for an Industrial Machine Learning Task. In: Conference on Machine Learning
for Cyber-Physical Systems (ML4CPS). Fraunhofer Application Centre IOSB-INA,
Lemgo; 2015. doi:10.1007/978-3-662-48838-6_8'
apa: Vukovic, K., Simonis, K., Dörksen, H., & Lohweg, V. (2015). Efficient Image
Processing System for an Industrial Machine Learning Task. In Conference on
Machine Learning for Cyber-Physical Systems (ML4CPS). Fraunhofer Application
Centre IOSB-INA, Lemgo. https://doi.org/10.1007/978-3-662-48838-6_8
bjps: Vukovic K et al. (2015) Efficient Image Processing System for
an Industrial Machine Learning Task. Conference on Machine Learning for Cyber-Physical
Systems (ML4CPS). Fraunhofer Application Centre IOSB-INA, Lemgo.
chicago: Vukovic, Kristijan, Kristina Simonis, Helene Dörksen, and Volker Lohweg.
“Efficient Image Processing System for an Industrial Machine Learning Task.” In
Conference on Machine Learning for Cyber-Physical Systems (ML4CPS). Fraunhofer
Application Centre IOSB-INA, Lemgo, 2015. https://doi.org/10.1007/978-3-662-48838-6_8.
chicago-de: 'Vukovic, Kristijan, Kristina Simonis, Helene Dörksen und Volker Lohweg.
2015. Efficient Image Processing System for an Industrial Machine Learning Task.
In: Conference on Machine Learning for Cyber-Physical Systems (ML4CPS).
Fraunhofer Application Centre IOSB-INA, Lemgo. doi:10.1007/978-3-662-48838-6_8,
.'
din1505-2-1: 'Vukovic, Kristijan ;
Simonis, Kristina ; Dörksen,
Helene ; Lohweg, Volker:
Efficient Image Processing System for an Industrial Machine Learning Task. In:
Conference on Machine Learning for Cyber-Physical Systems (ML4CPS). Fraunhofer
Application Centre IOSB-INA, Lemgo, 2015'
havard: 'K. Vukovic, K. Simonis, H. Dörksen, V. Lohweg, Efficient Image Processing
System for an Industrial Machine Learning Task, in: Conference on Machine Learning
for Cyber-Physical Systems (ML4CPS), Fraunhofer Application Centre IOSB-INA, Lemgo,
2015.'
ieee: K. Vukovic, K. Simonis, H. Dörksen, and V. Lohweg, “Efficient Image Processing
System for an Industrial Machine Learning Task,” in Conference on Machine Learning
for Cyber-Physical Systems (ML4CPS), 2015.
mla: Vukovic, Kristijan, et al. “Efficient Image Processing System for an Industrial
Machine Learning Task.” Conference on Machine Learning for Cyber-Physical Systems
(ML4CPS), 2015, doi:10.1007/978-3-662-48838-6_8.
short: 'K. Vukovic, K. Simonis, H. Dörksen, V. Lohweg, in: Conference on Machine
Learning for Cyber-Physical Systems (ML4CPS), Fraunhofer Application Centre IOSB-INA,
Lemgo, 2015.'
ufg: 'Vukovic, Kristijan et. al. (2015): Efficient Image Processing System
for an Industrial Machine Learning Task, in: Conference on Machine Learning
for Cyber-Physical Systems (ML4CPS), Fraunhofer Application Centre IOSB-INA,
Lemgo.'
van: 'Vukovic K, Simonis K, Dörksen H, Lohweg V. Efficient Image Processing System
for an Industrial Machine Learning Task. In: Conference on Machine Learning for
Cyber-Physical Systems (ML4CPS). Fraunhofer Application Centre IOSB-INA, Lemgo;
2015.'
date_created: 2019-12-04T09:04:50Z
date_updated: 2023-03-15T13:49:38Z
department:
- _id: DEP5023
doi: 10.1007/978-3-662-48838-6_8
keyword:
- Assistance System
- Euler Number
- Synchronous Motor
- Image Processing System
- Image Processing Method
language:
- iso: eng
main_file_link:
- url: https://link.springer.com/chapter/10.1007/978-3-662-48838-6_8
place: Fraunhofer Application Centre IOSB-INA, Lemgo
publication: Conference on Machine Learning for Cyber-Physical Systems (ML4CPS)
status: public
title: Efficient Image Processing System for an Industrial Machine Learning Task
type: conference
user_id: '68554'
year: 2015
...
---
_id: '2140'
abstract:
- lang: eng
text: 'Recent industrial applications are implemented in a modular way, resulting
in flexibility during the whole life cycle, i.e., setup, operation, and maintenance.
This applies especially to larger applications like logistic, production, and
printing processes. Their modular character is resulting from the constantly increasing
complexity of such installations, which makes their supervision for securing reliable
operation a difficult task: the data of hundreds (if not thousands) of signal
sources must be acquired, communicated, and evaluated for system diagnosis. In
this contribution we summarize the challenges arising in such applications and
show that distributed sensor and information fusion for modular self-diagnosis
tackles these challenges. Here, we propose an innovative distributed architecture
encompassing intelligent sensor nodes, self-configuring real-time communication
networks, and a suitable sensor and information fusion system for condition monitoring.
New challenges arise in the context of distributed information fusion systems,
which are identified and to which an outlook on future solutions is provided.
A number of these solutions have already been discovered, implemented, and are
evaluated in the context of a demonstrator, which resembles a real-world printing
application.'
author:
- first_name: Uwe
full_name: Mönks, Uwe
id: '1825'
last_name: Mönks
- first_name: Henning
full_name: Trsek, Henning
id: '1486'
last_name: Trsek
- first_name: Lars
full_name: Dürkop, Lars
last_name: Dürkop
- first_name: Volker
full_name: Geneiß, Volker
last_name: Geneiß
- first_name: Volker
full_name: Lohweg, Volker
id: '1804'
last_name: Lohweg
orcid: 0000-0002-3325-7887
citation:
ama: Mönks U, Trsek H, Dürkop L, Geneiß V, Lohweg V. Towards distributed intelligent
sensor and information fusion. Mechatronics. 2015;(34):63-71. doi:10.1016/j.mechatronics.2015.05.005
apa: Mönks, U., Trsek, H., Dürkop, L., Geneiß, V., & Lohweg, V. (2015). Towards
distributed intelligent sensor and information fusion. Mechatronics, (34),
63–71. https://doi.org/10.1016/j.mechatronics.2015.05.005
bjps: Mönks U et al. (2015) Towards Distributed Intelligent Sensor
and Information Fusion. Mechatronics 63–71.
chicago: 'Mönks, Uwe, Henning Trsek, Lars Dürkop, Volker Geneiß, and Volker Lohweg.
“Towards Distributed Intelligent Sensor and Information Fusion.” Mechatronics,
no. 34 (2015): 63–71. https://doi.org/10.1016/j.mechatronics.2015.05.005.'
chicago-de: 'Mönks, Uwe, Henning Trsek, Lars Dürkop, Volker Geneiß und Volker Lohweg.
2015. Towards distributed intelligent sensor and information fusion. Mechatronics,
Nr. 34: 63–71. doi:10.1016/j.mechatronics.2015.05.005,
.'
din1505-2-1: 'Mönks, Uwe ; Trsek,
Henning ; Dürkop, Lars ;
Geneiß, Volker ; Lohweg,
Volker: Towards distributed intelligent sensor and information fusion.
In: Mechatronics, Elsevier (2015), Nr. 34, S. 63–71'
havard: U. Mönks, H. Trsek, L. Dürkop, V. Geneiß, V. Lohweg, Towards distributed
intelligent sensor and information fusion, Mechatronics. (2015) 63–71.
ieee: U. Mönks, H. Trsek, L. Dürkop, V. Geneiß, and V. Lohweg, “Towards distributed
intelligent sensor and information fusion,” Mechatronics, no. 34, pp. 63–71,
2015.
mla: Mönks, Uwe, et al. “Towards Distributed Intelligent Sensor and Information
Fusion.” Mechatronics, no. 34, Elsevier, 2015, pp. 63–71, doi:10.1016/j.mechatronics.2015.05.005.
short: U. Mönks, H. Trsek, L. Dürkop, V. Geneiß, V. Lohweg, Mechatronics (2015)
63–71.
ufg: 'Mönks, Uwe et. al. (2015): Towards distributed intelligent sensor and
information fusion, in: Mechatronics (34), S. 63–71.'
van: Mönks U, Trsek H, Dürkop L, Geneiß V, Lohweg V. Towards distributed intelligent
sensor and information fusion. Mechatronics. 2015;(34):63–71.
date_created: 2019-12-04T09:29:07Z
date_updated: 2023-03-15T13:49:39Z
department:
- _id: DEP5023
doi: 10.1016/j.mechatronics.2015.05.005
issue: '34'
keyword:
- Cyber-physical systems
- Information fusion
- Fusion system design
- Intelligent sensors
- Self-configuration
- Intelligent networking
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.sciencedirect.com/science/article/pii/S0957415815000707
oa: '1'
page: 63-71
publication: Mechatronics
publication_identifier:
issn:
- 0957-4158
publisher: Elsevier
status: public
title: Towards distributed intelligent sensor and information fusion
type: journal_article
user_id: '68554'
year: 2015
...
---
_id: '427'
abstract:
- lang: ger
text: Für Länder mit hohen Lohnkosten eignen sich aus wirtschaftlichen Gründen hauptsächlich
hochautomatisierte Montagekonzepte. Für Niedriglohnländer hybride oder ausschließlich
manuelle Montagesysteme. Ein ideales Montagekonzept ist so gestaltet, dass es
durch wandlungsfähige Eigenschaften beide Ländertypen mit wenig Änderungsaufwand
abdecken kann. Der Beitrag behandelt Möglichkeiten und Ansätze, um solch ein wandlungsfähiges,
hybrides Montagesystem zu gestalten und erläutert die Realisierung ausgewählter
Methoden an einem hybriden Montagesystem der Continental AG.
author:
- first_name: Jan
full_name: Hrdina, Jan
last_name: Hrdina
- first_name: Thilo Gerhard
full_name: Gamber, Thilo Gerhard
id: '71451'
last_name: Gamber
citation:
ama: 'Hrdina J, Gamber TG. Einsatz von Methoden der Wandlungsfähigkeit bei einem
hybriden Montagesystem. In: Gesellschaft für Arbeitswissenschaft e.V., ed.
Verantwortung für die Arbeit der Zukunft, Frühjahrskongress der Gesellschaft für
Arbeitswissenschaft. Dortmund: GfA-Press; 2015.'
apa: 'Hrdina, J., & Gamber, T. G. (2015). Einsatz von Methoden der Wandlungsfähigkeit
bei einem hybriden Montagesystem. In Gesellschaft für Arbeitswissenschaft e.V.
(Ed.), Verantwortung für die Arbeit der Zukunft, Frühjahrskongress der Gesellschaft
für Arbeitswissenschaft. Dortmund: GfA-Press.'
bjps: 'Hrdina J and Gamber TG (2015) Einsatz von Methoden der Wandlungsfähigkeit
bei einem hybriden Montagesystem. In Gesellschaft für Arbeitswissenschaft e.V.
(ed.), Verantwortung für die Arbeit der Zukunft, Frühjahrskongress der Gesellschaft
für Arbeitswissenschaft. Dortmund: GfA-Press.'
chicago: 'Hrdina, Jan, and Thilo Gerhard Gamber. “Einsatz von Methoden der Wandlungsfähigkeit
bei einem hybriden Montagesystem.” In Verantwortung für die Arbeit der Zukunft,
Frühjahrskongress der Gesellschaft für Arbeitswissenschaft, edited by Gesellschaft
für Arbeitswissenschaft e.V. Dortmund: GfA-Press, 2015.'
chicago-de: 'Hrdina, Jan und Thilo Gerhard Gamber. 2015. Einsatz von Methoden der
Wandlungsfähigkeit bei einem hybriden Montagesystem. In: Verantwortung für
die Arbeit der Zukunft, Frühjahrskongress der Gesellschaft für Arbeitswissenschaft,
hg. von Gesellschaft für Arbeitswissenschaft e.V. Dortmund: GfA-Press.'
din1505-2-1: 'Hrdina, Jan ; Gamber, Thilo Gerhard: Einsatz von Methoden
der Wandlungsfähigkeit bei einem hybriden Montagesystem. In: Gesellschaft
für Arbeitswissenschaft e.V. (Hrsg.): Verantwortung für die Arbeit
der Zukunft, Frühjahrskongress der Gesellschaft für Arbeitswissenschaft. Dortmund :
GfA-Press, 2015'
havard: 'J. Hrdina, T.G. Gamber, Einsatz von Methoden der Wandlungsfähigkeit bei
einem hybriden Montagesystem, in: Gesellschaft für Arbeitswissenschaft e.V. (Ed.), Verantwortung
für die Arbeit der Zukunft, Frühjahrskongress der Gesellschaft für Arbeitswissenschaft,
GfA-Press, Dortmund, 2015.'
ieee: J. Hrdina and T. G. Gamber, “Einsatz von Methoden der Wandlungsfähigkeit bei
einem hybriden Montagesystem,” in Verantwortung für die Arbeit der Zukunft,
Frühjahrskongress der Gesellschaft für Arbeitswissenschaft, Karlsruhe, 2015.
mla: Hrdina, Jan, and Thilo Gerhard Gamber. “Einsatz von Methoden der Wandlungsfähigkeit
bei einem hybriden Montagesystem.” Verantwortung für die Arbeit der Zukunft,
Frühjahrskongress der Gesellschaft für Arbeitswissenschaft, edited by Gesellschaft
für Arbeitswissenschaft e.V., GfA-Press, 2015.
short: 'J. Hrdina, T.G. Gamber, in: Gesellschaft für Arbeitswissenschaft e.V. (Ed.), Verantwortung
für die Arbeit der Zukunft, Frühjahrskongress der Gesellschaft für Arbeitswissenschaft,
GfA-Press, Dortmund, 2015.'
ufg: 'Hrdina, Jan/Gamber, Thilo Gerhard (2015): Einsatz von Methoden der
Wandlungsfähigkeit bei einem hybriden Montagesystem, in: Gesellschaft für Arbeitswissenschaft
e.V. (Hg.): Verantwortung für die Arbeit der Zukunft, Frühjahrskongress der
Gesellschaft für Arbeitswissenschaft, Dortmund.'
van: 'Hrdina J, Gamber TG. Einsatz von Methoden der Wandlungsfähigkeit bei einem
hybriden Montagesystem. In: Gesellschaft für Arbeitswissenschaft e.V., editor. Verantwortung
für die Arbeit der Zukunft, Frühjahrskongress der Gesellschaft für Arbeitswissenschaft.
Dortmund: GfA-Press; 2015.'
conference:
end_date: 2015-02-27
location: Karlsruhe
name: Verantwortung für die Arbeit der Zukunft, 61. Frühjahrskongress der Gesellschaft
für Arbeitswissenschaft
start_date: 2015-02-25
corporate_editor:
- Gesellschaft für Arbeitswissenschaft e.V.
date_created: 2019-01-16T15:38:34Z
date_updated: 2023-03-15T13:49:51Z
ddc:
- '330'
extern: '1'
keyword:
- hybrides System
- Montagesystem
- Niedriglohnland
- Montagekonzept
- hybrides Montagesystem
language:
- iso: ger
place: Dortmund
publication: ' Verantwortung für die Arbeit der Zukunft, Frühjahrskongress der Gesellschaft
für Arbeitswissenschaft'
publication_identifier:
isbn:
- 978-3-936804-18-8
publication_status: published
publisher: GfA-Press
status: public
title: Einsatz von Methoden der Wandlungsfähigkeit bei einem hybriden Montagesystem
type: conference
user_id: '74004'
year: 2015
...
---
_id: '665'
abstract:
- lang: eng
text: 'The requirements of assembly systems are changing, due to trends such as
shorter innovation and product lifecycles as well as an increase in the number
of product variants and product customization. Certain markets are characterized
by demand volatility and short delivery schedules. As a result of shortened product
and innovation lifecycles and demand volatility, the assembly system design should
be versatile. The aim of this paper is to demonstrate a versatile assembly system
which was jointly developed by the Fraunhofer IOSB-INA and the Ostwestfalen-Lippe
University of Applied Sciences. '
author:
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Jürgen
full_name: Jasperneite, Jürgen
id: '1899'
last_name: Jasperneite
- first_name: Florian
full_name: Schrader, Florian
id: '1937'
last_name: Schrader
- first_name: Benedikt
full_name: Lücke, Benedikt
id: '11178'
last_name: Lücke
citation:
ama: 'Hinrichsen S, Jasperneite J, Schrader F, Lücke B. Versatile Assembly Systems
- Requirements, Design Principles and Examples. In: Villmer F-J, Padoano E, Department
of Production Engineering and Management, eds. Production Engineering and Management.
Lemgo: Hochschule Ostwestfalen-Lippe; 2014:37-45.'
apa: 'Hinrichsen, S., Jasperneite, J., Schrader, F., & Lücke, B. (2014). Versatile
Assembly Systems - Requirements, Design Principles and Examples. In F.-J. Villmer,
E. Padoano, & Department of Production Engineering and Management, (Eds.),
Production Engineering and Management (pp. 37–45). Lemgo: Hochschule Ostwestfalen-Lippe.'
bjps: 'Hinrichsen S et al. (2014) Versatile Assembly Systems - Requirements,
Design Principles and Examples. In Villmer F-J, Padoano E and Department of Production
Engineering and Management, (eds), Production Engineering and Management.
Lemgo: Hochschule Ostwestfalen-Lippe, pp. 37–45.'
chicago: 'Hinrichsen, Sven, Jürgen Jasperneite, Florian Schrader, and Benedikt Lücke.
“Versatile Assembly Systems - Requirements, Design Principles and Examples.” In
Production Engineering and Management, edited by Franz-Josef Villmer, Elio
Padoano, and Department of Production Engineering and Management, 37–45. Lemgo:
Hochschule Ostwestfalen-Lippe, 2014.'
chicago-de: 'Hinrichsen, Sven, Jürgen Jasperneite, Florian Schrader und Benedikt
Lücke. 2014. Versatile Assembly Systems - Requirements, Design Principles and
Examples. In: Production Engineering and Management, hg. von Franz-Josef
Villmer, Elio Padoano, und Department of Production Engineering and Management,
37–45. Lemgo: Hochschule Ostwestfalen-Lippe.'
din1505-2-1: 'Hinrichsen, Sven ; Jasperneite, Jürgen ; Schrader,
Florian ; Lücke, Benedikt:
Versatile Assembly Systems - Requirements, Design Principles and Examples. In:
Villmer, F.-J. ; Padoano,
E. ; Department of Production Engineering
and Management, (Hrsg.): Production Engineering and Management.
Lemgo : Hochschule Ostwestfalen-Lippe, 2014, S. 37–45'
havard: 'S. Hinrichsen, J. Jasperneite, F. Schrader, B. Lücke, Versatile Assembly
Systems - Requirements, Design Principles and Examples, in: F.-J. Villmer, E.
Padoano, Department of Production Engineering and Management, (Eds.), Production
Engineering and Management, Hochschule Ostwestfalen-Lippe, Lemgo, 2014: pp. 37–45.'
ieee: S. Hinrichsen, J. Jasperneite, F. Schrader, and B. Lücke, “Versatile Assembly
Systems - Requirements, Design Principles and Examples,” in Production Engineering
and Management, Lemgo, 2014, no. 10, pp. 37–45.
mla: Hinrichsen, Sven, et al. “Versatile Assembly Systems - Requirements, Design
Principles and Examples.” Production Engineering and Management, edited
by Franz-Josef Villmer et al., no. 10, Hochschule Ostwestfalen-Lippe, 2014, pp.
37–45.
short: 'S. Hinrichsen, J. Jasperneite, F. Schrader, B. Lücke, in: F.-J. Villmer,
E. Padoano, Department of Production Engineering and Management, (Eds.), Production
Engineering and Management, Hochschule Ostwestfalen-Lippe, Lemgo, 2014, pp. 37–45.'
ufg: 'Hinrichsen, Sven et. al. (2014): Versatile Assembly Systems - Requirements,
Design Principles and Examples, in: Franz-Josef Villmer et. al. (Hgg.): Production
Engineering and Management, Lemgo, S. 37–45.'
van: 'Hinrichsen S, Jasperneite J, Schrader F, Lücke B. Versatile Assembly Systems
- Requirements, Design Principles and Examples. In: Villmer F-J, Padoano E, Department
of Production Engineering and Management, editors. Production Engineering and
Management. Lemgo: Hochschule Ostwestfalen-Lippe; 2014. p. 37–45.'
conference:
end_date: 2014-09-26
location: Lemgo
name: Proceedings 4th international conference
start_date: 2014-09-25
corporate_editor:
- Department of Production Engineering and Management,
- Hochschule Ostwestfalen-Lippe
date_created: 2019-01-16T16:07:56Z
date_updated: 2023-03-15T13:50:07Z
department:
- _id: DEP7020
- _id: DEP1305
- _id: DEP5023
- _id: DEP5019
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
issue: '10'
keyword:
- Assembly System
- Versatility
- Modularity
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fb7/fileadmin/download/labore/industrialengineering/pdf/Veroeffentlichungen/PEM_2014_Versatile_Assembly_Systems_-_Requirements__Design_Principles_and_Examples.pdf
oa: '1'
page: 37-45
place: Lemgo
publication: Production Engineering and Management
publication_status: published
publisher: Hochschule Ostwestfalen-Lippe
quality_controlled: '1'
status: public
title: Versatile Assembly Systems - Requirements, Design Principles and Examples
type: conference
user_id: '49010'
year: 2014
...
---
_id: '10068'
abstract:
- lang: eng
text: Currently, cities are confronting a multitude of challenges including climate
change, demographic change, urbanization and land subsidence. Resulting flooding,
droughts and other disturbances could lead to water shortages, severe interruptions,
hydraulic problems or underutilization of water infrastructure systems. One way
that cities can become more resilient is by diversifying their water resources
and reducing their dependency on central water infrastructures. Water infrastructure
systems consisting of decentral or semi-central partial systems would be more
resilient because a failure in these systems would only affect a small part of
the urban area. Instead of an incremental improvement of the water infrastructure,
there is a need for system innovations that will allow an adaptive development
to changing conditions and which will ensure that future sustainability challenges
are met. However, moving towards more resilient water technologies is seen as
controversial for built-up areas. To answer the question if a transformation to
a more resilient water infrastructure in built-up areas is feasible (technically
and economically), a balancing and assessment of the corresponding effects have
been done by way of comparing a “transformation” scenario with a reference scenario
“business as usual”. If one takes a long-term period of observation (70 years),
the costs balance of the scenarios “reference” and “transformation” both turn
out to be on a comparative level. By contrast, the consumption of environmental
resources in the scenario “transformation” is almost twice as low as in the “reference”.
author:
- first_name: Engelbert
full_name: Schramm, Engelbert
last_name: Schramm
- first_name: Jörg
full_name: Felmeden, Jörg
id: '81335'
last_name: Felmeden
citation:
ama: 'Schramm E, Felmeden J. Towards More Resilient Water Infrastructures. In: Zimmermann
KO, ed. Resilient Cities 2 : Cities and Adaptation to Climate Change – Proceedings
of the Global Forum 2011 . Vol 2. Local sustainability. Springer Dordrecht;
2012:177-186. doi:https://doi.org/10.1007/978-94-007-4223-9_19'
apa: 'Schramm, E., & Felmeden, J. (2012). Towards More Resilient Water Infrastructures.
In K. O. Zimmermann (Ed.), Resilient Cities 2 : Cities and Adaptation to Climate
Change – Proceedings of the Global Forum 2011 (Vol. 2, pp. 177–186). Springer
Dordrecht. https://doi.org/10.1007/978-94-007-4223-9_19'
bjps: 'Schramm E and Felmeden J (2012) Towards More Resilient Water Infrastructures.
In Zimmermann KO (ed.), Resilient Cities 2 : Cities and Adaptation to Climate
Change – Proceedings of the Global Forum 2011 , vol. 2. Dordrecht: Springer
Dordrecht, pp. 177–186.'
chicago: 'Schramm, Engelbert, and Jörg Felmeden. “Towards More Resilient Water Infrastructures.”
In Resilient Cities 2 : Cities and Adaptation to Climate Change – Proceedings
of the Global Forum 2011 , edited by Karl Otto Zimmermann, 2:177–86. Local
Sustainability. Dordrecht: Springer Dordrecht, 2012. https://doi.org/10.1007/978-94-007-4223-9_19.'
chicago-de: 'Schramm, Engelbert und Jörg Felmeden. 2012. Towards More Resilient
Water Infrastructures. In: Resilient Cities 2 : Cities and Adaptation to Climate
Change – Proceedings of the Global Forum 2011 , hg. von Karl Otto Zimmermann,
2:177–186. Local sustainability. Dordrecht: Springer Dordrecht. doi:https://doi.org/10.1007/978-94-007-4223-9_19,
.'
din1505-2-1: 'Schramm, Engelbert ;
Felmeden, Jörg: Towards More Resilient
Water Infrastructures. In: Zimmermann,
K. O. (Hrsg.): Resilient Cities 2 : Cities and Adaptation to Climate
Change – Proceedings of the Global Forum 2011 , Local sustainability.
Bd. 2. Dordrecht : Springer Dordrecht, 2012, S. 177–186'
havard: 'E. Schramm, J. Felmeden, Towards More Resilient Water Infrastructures,
in: K.O. Zimmermann (Ed.), Resilient Cities 2 : Cities and Adaptation to Climate
Change – Proceedings of the Global Forum 2011 , Springer Dordrecht, Dordrecht,
2012: pp. 177–186.'
ieee: 'E. Schramm and J. Felmeden, “Towards More Resilient Water Infrastructures,”
in Resilient Cities 2 : Cities and Adaptation to Climate Change – Proceedings
of the Global Forum 2011 , vol. 2, K. O. Zimmermann, Ed. Dordrecht: Springer
Dordrecht, 2012, pp. 177–186. doi: https://doi.org/10.1007/978-94-007-4223-9_19.'
mla: 'Schramm, Engelbert, and Jörg Felmeden. “Towards More Resilient Water Infrastructures.”
Resilient Cities 2 : Cities and Adaptation to Climate Change – Proceedings
of the Global Forum 2011 , edited by Karl Otto Zimmermann, vol. 2, Springer
Dordrecht, 2012, pp. 177–86, https://doi.org/10.1007/978-94-007-4223-9_19.'
short: 'E. Schramm, J. Felmeden, in: K.O. Zimmermann (Ed.), Resilient Cities 2 :
Cities and Adaptation to Climate Change – Proceedings of the Global Forum 2011
, Springer Dordrecht, Dordrecht, 2012, pp. 177–186.'
ufg: 'Schramm, Engelbert/Felmeden, Jörg: Towards More Resilient Water Infrastructures,
in: Zimmermann, Karl Otto (Hg.): Resilient Cities 2 : Cities and Adaptation
to Climate Change – Proceedings of the Global Forum 2011 , Bd. 2, Dordrecht 2012
(Local sustainability), S. 177–186.'
van: 'Schramm E, Felmeden J. Towards More Resilient Water Infrastructures. In: Zimmermann
KO, editor. Resilient Cities 2 : Cities and Adaptation to Climate Change – Proceedings
of the Global Forum 2011 . Dordrecht: Springer Dordrecht; 2012. p. 177–86. (Local
sustainability; vol. 2).'
conference:
end_date: 2011-06-05
location: Bonn
name: 'Proceedings of the Global Forum 2011 '
start_date: 2011-06-03
date_created: 2023-06-30T06:30:30Z
date_updated: 2023-07-05T14:53:26Z
department:
- _id: DEP3021
doi: https://doi.org/10.1007/978-94-007-4223-9_19
editor:
- first_name: Karl Otto
full_name: Zimmermann, Karl Otto
last_name: Zimmermann
extern: '1'
intvolume: ' 2'
keyword:
- Climate change
- Eco-efficiency analysis
- System innovations
- Vulnerability
- Water infrastructure
language:
- iso: eng
page: 177–186
place: Dordrecht
publication: 'Resilient Cities 2 : Cities and Adaptation to Climate Change – Proceedings
of the Global Forum 2011 '
publication_identifier:
eisbn:
- '978-94-007-4223-9 '
eissn:
- '2211-2790 '
isbn:
- 978-94-007-9776-5
- 978-94-007-4222-2
issn:
- '2211-2782 '
publication_status: published
publisher: Springer Dordrecht
related_material:
link:
- relation: confirmation
url: https://www.springer.com/us/book/9789400742222
series_title: Local sustainability
status: public
title: Towards More Resilient Water Infrastructures
type: book_chapter
user_id: '83781'
volume: 2
year: '2012'
...
---
_id: '2102'
abstract:
- lang: ger
text: Die Zustandsüberwachung erfolgt derzeit in der Regel durch Einsatz spezieller Sensorik,
bspw. durch Vibrationsmessungen. Außerdem werden die Antriebe lediglich isoliert
betrachtet, eine Zusammenführung anfallender Informationen eines räumlich verteilten Antriebsverbunds findet meist
nicht statt. Im Folgenden wird ein neuartiges Motor-as-Sensor-Konzept vorgeschlagen
und validiert, das eine antizipatorische Zustandsüberwachung ohne Einsatz zusätzlicher
Sensorik allein durch Verarbeitung der phasenbezogenen Motorströme ermöglicht. Zusätzlich wird ein Informationsfusionskonzept vorge-stellt,
das die Informationen aller im Verbund beteiligten Antriebe zusammenführt, um
darüber eine mit weniger Unsicherheiten behaftete Aussage über den Zustand einer
Ap-plikation herbeizuführen. Das Hauptaugenmerk liegt hierbei insbesondere auf der Beherrschung der anfallenden riesigen Datenmengen, die zur Verarbeitung in eingebetteten
Systemen reduziert werden müssen.
author:
- first_name: Karl
full_name: Voth, Karl
last_name: Voth
- first_name: Alexander
full_name: Dicks, Alexander
id: '1853'
last_name: Dicks
- first_name: Volker
full_name: Lohweg, Volker
id: '1804'
last_name: Lohweg
orcid: 0000-0002-3325-7887
citation:
ama: 'Voth K, Dicks A, Lohweg V. Konfliktlösende Informationsfusion zur Maschinendiagnose
am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft
Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund.
In: ; 2011.'
apa: Voth, K., Dicks, A., & Lohweg, V. (2011). Konfliktlösende Informationsfusion
zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational
Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30.
November - 02. Dezember 2011, Dortmund.
bjps: Voth K, Dicks A and Lohweg V (2011) Konfliktlösende Informationsfusion
zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational
Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30.
November - 02. Dezember 2011, Dortmund.
chicago: Voth, Karl, Alexander Dicks, and Volker Lohweg. “Konfliktlösende Informationsfusion
zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational
Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30.
November - 02. Dezember 2011, Dortmund,” 2011.
chicago-de: 'Voth, Karl, Alexander Dicks und Volker Lohweg. 2011. Konfliktlösende
Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen, 21.
Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik
(GMA), 30. November - 02. Dezember 2011, Dortmund. In: .'
din1505-2-1: 'Voth, Karl ; Dicks,
Alexander ; Lohweg, Volker:
Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen,
21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik
(GMA), 30. November - 02. Dezember 2011, Dortmund. In: , 2011'
havard: 'K. Voth, A. Dicks, V. Lohweg, Konfliktlösende Informationsfusion zur Maschinendiagnose
am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft
Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund,
in: 2011.'
ieee: K. Voth, A. Dicks, and V. Lohweg, “Konfliktlösende Informationsfusion zur
Maschinendiagnose am Beispiel von Extrusionsanlagen, 21. Workshop Computational
Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA), 30.
November - 02. Dezember 2011, Dortmund,” 2011.
mla: Voth, Karl, et al. Konfliktlösende Informationsfusion zur Maschinendiagnose
am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft
Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund.
2011.
short: 'K. Voth, A. Dicks, V. Lohweg, in: 2011.'
ufg: 'Voth, Karl et. al. (2011): Konfliktlösende Informationsfusion zur Maschinendiagnose
am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft
Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund,
in: .'
van: Voth K, Dicks A, Lohweg V. Konfliktlösende Informationsfusion zur Maschinendiagnose
am Beispiel von Extrusionsanlagen, 21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft
Mess- und Automatisierungstechnik (GMA), 30. November - 02. Dezember 2011, Dortmund.
In 2011.
date_created: 2019-12-02T14:32:58Z
date_updated: 2023-03-15T13:49:38Z
department:
- _id: DEP5023
keyword:
- Sensor- und Informationsfusion
- elektrischer Antrieb
- Cyber-Physical System
- Industrie 4.0
- Big Data
language:
- iso: ger
publication_status: published
status: public
title: Konfliktlösende Informationsfusion zur Maschinendiagnose am Beispiel von Extrusionsanlagen,
21. Workshop Computational Intelligence, VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik
(GMA), 30. November - 02. Dezember 2011, Dortmund
type: conference
user_id: '45673'
year: 2011
...
---
_id: '4489'
abstract:
- lang: eng
text: In this paper we delineate and compare the functional and structural potential
but also shortcomings of two Ambient Assisted Living (AAL) systems, which aim
at providing remote care for elder adults living independently at home. One system,
a personal emergency response system, is already in use, the other system, the
Future Care Lab, presents a holistic tele-medical care setting, which is currently
in its conceptualization and test phase at RWTH Aachen University. By learning
from the experience with a well-established system in both, restrictions and benefits,
implications for a user-centred development for future telemedical systems can
be derived.
author:
- first_name: Shirley
full_name: Beul, Shirley
last_name: Beul
- first_name: Lars
full_name: Klack, Lars
last_name: Klack
- first_name: Kai
full_name: Kasugai, Kai
last_name: Kasugai
- first_name: Christina
full_name: Möllering, Christina
last_name: Möllering
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
- first_name: Wiktoria
full_name: Wilkowska, Wiktoria
last_name: Wilkowska
- first_name: Martina
full_name: Ziefle, Martina
last_name: Ziefle
citation:
ama: 'Beul S, Klack L, Kasugai K, et al. Between Innovation and Daily Practice in
the Development of AAL Systems: Learning from the Experience with Today’s Systems.
In: Szomszor M, Kostkova P, eds. Electronic Healthcare. Vol 69. Lecture
Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications
Engineering. ; 2010:111-118. doi:10.1007/978-3-642-23635-8_14'
apa: 'Beul, S., Klack, L., Kasugai, K., Möllering, C., Röcker, C., Wilkowska, W.,
& Ziefle, M. (2010). Between Innovation and Daily Practice in the Development
of AAL Systems: Learning from the Experience with Today’s Systems. In M. Szomszor
& P. Kostkova (Eds.), Electronic Healthcare (Vol. 69, pp. 111–118).
Casablanca, Morocco. https://doi.org/10.1007/978-3-642-23635-8_14'
bjps: 'Beul S et al. (2010) Between Innovation and Daily Practice
in the Development of AAL Systems: Learning from the Experience with Today’s Systems.
In Szomszor M and Kostkova P (eds), Electronic Healthcare, vol. 69. pp.
111–118.'
chicago: 'Beul, Shirley, Lars Klack, Kai Kasugai, Christina Möllering, Carsten Röcker,
Wiktoria Wilkowska, and Martina Ziefle. “Between Innovation and Daily Practice
in the Development of AAL Systems: Learning from the Experience with Today’s Systems.”
In Electronic Healthcare, edited by Martin Szomszor and Patty Kostkova,
69:111–18. Lecture Notes of the Institute for Computer Sciences, Social Informatics
and Telecommunications Engineering, 2010. https://doi.org/10.1007/978-3-642-23635-8_14.'
chicago-de: 'Beul, Shirley, Lars Klack, Kai Kasugai, Christina Möllering, Carsten
Röcker, Wiktoria Wilkowska und Martina Ziefle. 2010. Between Innovation and Daily
Practice in the Development of AAL Systems: Learning from the Experience with
Today’s Systems. In: Electronic Healthcare, hg. von Martin Szomszor und
Patty Kostkova, 69:111–118. Lecture Notes of the Institute for Computer Sciences,
Social Informatics and Telecommunications Engineering. doi:10.1007/978-3-642-23635-8_14,
.'
din1505-2-1: 'Beul, Shirley ; Klack, Lars ; Kasugai,
Kai ; Möllering, Christina
; Röcker, Carsten ; Wilkowska,
Wiktoria ; Ziefle, Martina:
Between Innovation and Daily Practice in the Development of AAL Systems: Learning
from the Experience with Today’s Systems. In: Szomszor,
M. ; Kostkova, P. (Hrsg.):
Electronic Healthcare, Lecture Notes of the Institute for Computer
Sciences, Social Informatics and Telecommunications Engineering. Bd. 69, 2010,
S. 111–118'
havard: 'S. Beul, L. Klack, K. Kasugai, C. Möllering, C. Röcker, W. Wilkowska, M.
Ziefle, Between Innovation and Daily Practice in the Development of AAL Systems:
Learning from the Experience with Today’s Systems, in: M. Szomszor, P. Kostkova
(Eds.), Electronic Healthcare, 2010: pp. 111–118.'
ieee: 'S. Beul et al., “Between Innovation and Daily Practice in the Development
of AAL Systems: Learning from the Experience with Today’s Systems,” in Electronic
Healthcare, Casablanca, Morocco, 2010, vol. 69, pp. 111–118.'
mla: 'Beul, Shirley, et al. “Between Innovation and Daily Practice in the Development
of AAL Systems: Learning from the Experience with Today’s Systems.” Electronic
Healthcare, edited by Martin Szomszor and Patty Kostkova, vol. 69, 2010,
pp. 111–18, doi:10.1007/978-3-642-23635-8_14.'
short: 'S. Beul, L. Klack, K. Kasugai, C. Möllering, C. Röcker, W. Wilkowska, M.
Ziefle, in: M. Szomszor, P. Kostkova (Eds.), Electronic Healthcare, 2010, pp.
111–118.'
ufg: 'Beul, Shirley et. al. (2010): Between Innovation and Daily Practice
in the Development of AAL Systems: Learning from the Experience with Today’s Systems,
in: Martin Szomszor/Patty Kostkova (Hgg.): Electronic Healthcare (=
Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications
Engineering 69), S. 111–118.'
van: 'Beul S, Klack L, Kasugai K, Möllering C, Röcker C, Wilkowska W, et al. Between
Innovation and Daily Practice in the Development of AAL Systems: Learning from
the Experience with Today’s Systems. In: Szomszor M, Kostkova P, editors. Electronic
Healthcare. 2010. p. 111–8. ( Lecture Notes of the Institute for Computer Sciences,
Social Informatics and Telecommunications Engineering; vol. 69).'
conference:
end_date: 2010-12-15
location: Casablanca, Morocco
name: Third International Conference, eHealth 2010
start_date: 2010-12-13
date_created: 2021-01-21T09:21:19Z
date_updated: 2023-03-15T13:49:53Z
department:
- _id: DEP5023
doi: 10.1007/978-3-642-23635-8_14
editor:
- first_name: 'Martin '
full_name: 'Szomszor, Martin '
last_name: Szomszor
- first_name: 'Patty '
full_name: 'Kostkova, Patty '
last_name: Kostkova
extern: '1'
intvolume: ' 69'
keyword:
- eHealth
- Ambient Assisted Living Telemonitoring
- Telecare
- Future Care Lab
- Personal Emergency Response System
- PERS
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 111-118
publication: Electronic Healthcare
publication_identifier:
eisbn:
- 978-3-642-23635-8
isbn:
- '978-3-642-23634-1 '
publication_status: published
series_title: ' Lecture Notes of the Institute for Computer Sciences, Social Informatics
and Telecommunications Engineering'
status: public
title: 'Between Innovation and Daily Practice in the Development of AAL Systems: Learning
from the Experience with Today’s Systems'
type: conference
user_id: '15514'
volume: 69
year: 2010
...
---
_id: '486'
abstract:
- lang: eng
text: Growing market demands on enterprises and the resulting challenges for their
organization have been discussed for many years now. The flexibilty and mutability
of an enterprise are thereby considered as a significant factor for success.
author:
- first_name: Gert
full_name: Zülch, Gert
last_name: Zülch
- first_name: Thilo Gerhard
full_name: Gamber, Thilo Gerhard
id: '71451'
last_name: Gamber
- first_name: Patricia
full_name: Stock, Patricia
last_name: Stock
citation:
ama: 'Zülch G, Gamber TG, Stock P. Methodology for the Analysis of Simulation-Based
Decision-Making in the Manufacturing Area. In: Olhager J, Persson F, eds. Advances
in Production Management Systems. New York: Springer; 2007:337-344.'
apa: 'Zülch, G., Gamber, T. G., & Stock, P. (2007). Methodology for the Analysis
of Simulation-Based Decision-Making in the Manufacturing Area. In J. Olhager &
F. Persson (Eds.), Advances in Production Management Systems (pp. 337–344).
New York: Springer.'
bjps: 'Zülch G, Gamber TG and Stock P (2007) Methodology for the Analysis
of Simulation-Based Decision-Making in the Manufacturing Area. In Olhager J and
Persson F (eds), Advances in Production Management Systems. New York: Springer,
pp. 337–344.'
chicago: 'Zülch, Gert, Thilo Gerhard Gamber, and Patricia Stock. “Methodology for
the Analysis of Simulation-Based Decision-Making in the Manufacturing Area.” In
Advances in Production Management Systems, edited by Jan Olhager and Fredrik
Persson, 337–44. New York: Springer, 2007.'
chicago-de: 'Zülch, Gert, Thilo Gerhard Gamber und Patricia Stock. 2007. Methodology
for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area.
In: Advances in Production Management Systems, hg. von Jan Olhager und
Fredrik Persson, 337–344. New York: Springer.'
din1505-2-1: 'Zülch, Gert ; Gamber, Thilo Gerhard ; Stock,
Patricia: Methodology for the Analysis of Simulation-Based Decision-Making
in the Manufacturing Area. In: Olhager,
J. ; Persson, F. (Hrsg.):
Advances in Production Management Systems. New York : Springer, 2007, S. 337–344'
havard: 'G. Zülch, T.G. Gamber, P. Stock, Methodology for the Analysis of Simulation-Based
Decision-Making in the Manufacturing Area, in: J. Olhager, F. Persson (Eds.),
Advances in Production Management Systems, Springer, New York, 2007: pp. 337–344.'
ieee: G. Zülch, T. G. Gamber, and P. Stock, “Methodology for the Analysis of Simulation-Based
Decision-Making in the Manufacturing Area,” in Advances in Production Management
Systems, Linköping, 2007, pp. 337–344.
mla: Zülch, Gert, et al. “Methodology for the Analysis of Simulation-Based Decision-Making
in the Manufacturing Area.” Advances in Production Management Systems,
edited by Jan Olhager and Fredrik Persson, Springer, 2007, pp. 337–44.
short: 'G. Zülch, T.G. Gamber, P. Stock, in: J. Olhager, F. Persson (Eds.), Advances
in Production Management Systems, Springer, New York, 2007, pp. 337–344.'
ufg: 'Zülch, Gert et. al. (2007): Methodology for the Analysis of Simulation-Based
Decision-Making in the Manufacturing Area, in: Jan Olhager/Fredrik Persson (Hgg.):
Advances in Production Management Systems, New York, S. 337–344.'
van: 'Zülch G, Gamber TG, Stock P. Methodology for the Analysis of Simulation-Based
Decision-Making in the Manufacturing Area. In: Olhager J, Persson F, editors.
Advances in Production Management Systems. New York: Springer; 2007. p. 337–44.'
conference:
end_date: 2007-09-19
location: Linköping
name: International IFIP TC 5, WG 5.7 Conference on Advances in Production Management
Systems (APMS 2007)
start_date: 2007-09-17
date_created: 2019-01-30T07:51:48Z
date_updated: 2023-03-15T13:49:56Z
editor:
- first_name: Jan
full_name: Olhager, Jan
last_name: Olhager
- first_name: Fredrik
full_name: Persson, Fredrik
last_name: Persson
extern: '1'
keyword:
- production planning and control
- decision-making system
- personnel-oriented simulation
language:
- iso: eng
page: 337-344
place: New York
publication: Advances in Production Management Systems
publication_identifier:
isbn:
- 978-0-387-74157-4
publication_status: published
publisher: Springer
status: public
title: Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing
Area
type: conference
user_id: '74004'
year: 2007
...
---
_id: '4813'
abstract:
- lang: eng
text: This paper presents a formative multi-method evaluation on future gaming systems.
Following a scenario-driven approach, quantitative and qualitative methods are
employed to elicit feedback from different target user populations. Based on the
results of the different evaluation parts, a set of design requirements for future
home entertainment systems is derived. These requirements are then used to guide
the development process of a ubiquitous computing gaming platform. To demonstrate
the usefulness of the gaming platform, a sample application is discussed, which
is described in the last section of this paper.
author:
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
- first_name: Carsten
full_name: Magerkurth, Carsten
last_name: Magerkurth
- first_name: Maral
full_name: Haar, Maral
last_name: Haar
citation:
ama: 'Röcker C, Magerkurth C, Haar M. User Interfaces for Pervasive Games: Experiences
of a Formative Multi-Method Evaluation and its Implications for System Development.
In: Stephanidis C, Pieper M, eds. Universal Access in Ambient Intelligence
Environments : 9th ERCIM Workshop on User Interfaces for All. Vol 4397. Lecture
Notes in Computer Science. Berlin: Springer; 2006:352-368. doi:10.1007/978-3-540-71025-7_23'
apa: 'Röcker, C., Magerkurth, C., & Haar, M. (2006). User Interfaces for Pervasive
Games: Experiences of a Formative Multi-Method Evaluation and its Implications
for System Development. In C. Stephanidis & M. Pieper (Eds.), Universal
Access in Ambient Intelligence Environments : 9th ERCIM Workshop on User Interfaces
for All (Vol. 4397, pp. 352–368). Berlin: Springer. https://doi.org/10.1007/978-3-540-71025-7_23'
bjps: 'Röcker C, Magerkurth C and Haar M (2006) User Interfaces for Pervasive
Games: Experiences of a Formative Multi-Method Evaluation and Its Implications
for System Development. In Stephanidis C and Pieper M (eds), Universal Access
in Ambient Intelligence Environments : 9th ERCIM Workshop on User Interfaces for
All, vol. 4397. Berlin: Springer, pp. 352–368.'
chicago: 'Röcker, Carsten, Carsten Magerkurth, and Maral Haar. “User Interfaces
for Pervasive Games: Experiences of a Formative Multi-Method Evaluation and Its
Implications for System Development.” In Universal Access in Ambient Intelligence
Environments : 9th ERCIM Workshop on User Interfaces for All, edited by Constantine
Stephanidis and Michael Pieper, 4397:352–68. Lecture Notes in Computer Science.
Berlin: Springer, 2006. https://doi.org/10.1007/978-3-540-71025-7_23.'
chicago-de: 'Röcker, Carsten, Carsten Magerkurth und Maral Haar. 2006. User Interfaces
for Pervasive Games: Experiences of a Formative Multi-Method Evaluation and its
Implications for System Development. In: Universal Access in Ambient Intelligence
Environments : 9th ERCIM Workshop on User Interfaces for All, hg. von Constantine
Stephanidis und Michael Pieper, 4397:352–368. Lecture Notes in Computer Science.
Berlin: Springer. doi:10.1007/978-3-540-71025-7_23,
.'
din1505-2-1: 'Röcker, Carsten ; Magerkurth, Carsten ; Haar,
Maral: User Interfaces for Pervasive Games: Experiences of a Formative
Multi-Method Evaluation and its Implications for System Development. In: Stephanidis, C. ; Pieper,
M. (Hrsg.): Universal Access in Ambient Intelligence Environments :
9th ERCIM Workshop on User Interfaces for All, Lecture Notes in Computer
Science. Bd. 4397. Berlin : Springer, 2006, S. 352–368'
havard: 'C. Röcker, C. Magerkurth, M. Haar, User Interfaces for Pervasive Games:
Experiences of a Formative Multi-Method Evaluation and its Implications for System
Development, in: C. Stephanidis, M. Pieper (Eds.), Universal Access in Ambient
Intelligence Environments : 9th ERCIM Workshop on User Interfaces for All, Springer,
Berlin, 2006: pp. 352–368.'
ieee: 'C. Röcker, C. Magerkurth, and M. Haar, “User Interfaces for Pervasive Games:
Experiences of a Formative Multi-Method Evaluation and its Implications for System
Development,” in Universal Access in Ambient Intelligence Environments : 9th
ERCIM Workshop on User Interfaces for All, Königswinter (Bonn), Germany, 2006,
vol. 4397, pp. 352–368.'
mla: 'Röcker, Carsten, et al. “User Interfaces for Pervasive Games: Experiences
of a Formative Multi-Method Evaluation and Its Implications for System Development.”
Universal Access in Ambient Intelligence Environments : 9th ERCIM Workshop
on User Interfaces for All, edited by Constantine Stephanidis and Michael
Pieper, vol. 4397, Springer, 2006, pp. 352–68, doi:10.1007/978-3-540-71025-7_23.'
short: 'C. Röcker, C. Magerkurth, M. Haar, in: C. Stephanidis, M. Pieper (Eds.),
Universal Access in Ambient Intelligence Environments : 9th ERCIM Workshop on
User Interfaces for All, Springer, Berlin, 2006, pp. 352–368.'
ufg: 'Röcker, Carsten et. al. (2006): User Interfaces for Pervasive Games:
Experiences of a Formative Multi-Method Evaluation and its Implications for System
Development, in: Constantine Stephanidis/Michael Pieper (Hgg.): Universal Access
in Ambient Intelligence Environments : 9th ERCIM Workshop on User Interfaces for
All (=Lecture Notes in Computer Science 4397), Berlin, S. 352–368.'
van: 'Röcker C, Magerkurth C, Haar M. User Interfaces for Pervasive Games: Experiences
of a Formative Multi-Method Evaluation and its Implications for System Development.
In: Stephanidis C, Pieper M, editors. Universal Access in Ambient Intelligence
Environments : 9th ERCIM Workshop on User Interfaces for All. Berlin: Springer;
2006. p. 352–68. (Lecture Notes in Computer Science; vol. 4397).'
conference:
end_date: 2006+09-28
location: Königswinter (Bonn), Germany
name: 9th ERCIM Workshop on User Interfaces for All
start_date: 2006-09-27
date_created: 2021-02-02T09:56:54Z
date_updated: 2023-03-15T13:49:55Z
department:
- _id: DEP5023
doi: 10.1007/978-3-540-71025-7_23
editor:
- first_name: Constantine
full_name: Stephanidis, Constantine
last_name: Stephanidis
- first_name: Michael
full_name: Pieper, Michael
last_name: Pieper
extern: '1'
intvolume: ' 4397'
keyword:
- User Interfaces
- Pervasive Games
- Evaluation
- System Development
- Tangible User Interfaces
- Human Computer Interaction
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 352-368
place: Berlin
publication: 'Universal Access in Ambient Intelligence Environments : 9th ERCIM Workshop
on User Interfaces for All'
publication_identifier:
eisbn:
- 978-3-540-71025-7
isbn:
- 978-3-540-71024-0
publication_status: published
publisher: Springer
series_title: Lecture Notes in Computer Science
status: public
title: 'User Interfaces for Pervasive Games: Experiences of a Formative Multi-Method
Evaluation and its Implications for System Development'
type: conference
user_id: '15514'
volume: 4397
year: 2006
...