---
_id: '265'
abstract:
- lang: eng
text: The maintenance of a tool for injection molding or forming is usually accompanied
by its disassembly and assembly. The duration of the assembly activities is often
a large part of the total activity time for the maintenance of the tool. The degree
of performance of the employees in the execution of these disassembly and assembly
activities is often low. In addition, allowances occur (e.g. searching for work
equipment). At the Industrial Engineering Lab of the Ostwestfalen-Lippe University
of Applied Sciences, a prototype of an assistance system was developed to support
the assembly activities in toolmaking. With the help of this system, the operator
is guided step by step through the assembly process. The economic potential of
the system exists in the reduction of training times, the avoidance of assembly
errors and the increase of labor productivity.
author:
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Daniel
full_name: Riediger, Daniel
id: '52263'
last_name: Riediger
- first_name: Alexander
full_name: Unrau, Alexander
id: '64690'
last_name: Unrau
citation:
ama: 'Hinrichsen S, Riediger D, Unrau A. Development of a Projection-Based Assistance
System for Maintaining Injection Molding Tools. In: IEEE/ IEEM, ed. 2017 IEEE
International Conference on Industrial Engineering and Engineering Management
(IEEM). Danvers; 2017:1571-1575. doi:https://doi.org/10.1109/IEEM.2017.8290157'
apa: Hinrichsen, S., Riediger, D., & Unrau, A. (2017). Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools. In IEEE/ IEEM (Ed.),
2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM) (pp. 1571–1575). Danvers. https://doi.org/10.1109/IEEM.2017.8290157
bjps: Hinrichsen S, Riediger D and Unrau A (2017) Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools. In IEEE/ IEEM (ed.),
2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM). Danvers, pp. 1571–1575.
chicago: Hinrichsen, Sven, Daniel Riediger, and Alexander Unrau. “Development of
a Projection-Based Assistance System for Maintaining Injection Molding Tools.”
In 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM), edited by IEEE/ IEEM, 1571–75. Danvers, 2017. https://doi.org/10.1109/IEEM.2017.8290157.
chicago-de: 'Hinrichsen, Sven, Daniel Riediger und Alexander Unrau. 2017. Development
of a Projection-Based Assistance System for Maintaining Injection Molding Tools.
In: 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM), hg. von IEEE/ IEEM, 1571–1575. Danvers. doi:https://doi.org/10.1109/IEEM.2017.8290157,
.'
din1505-2-1: 'Hinrichsen, Sven ; Riediger, Daniel ; Unrau,
Alexander: Development of a Projection-Based Assistance System for Maintaining
Injection Molding Tools. In: IEEE/ IEEM
(Hrsg.): 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM). Danvers, 2017, S. 1571–1575'
havard: 'S. Hinrichsen, D. Riediger, A. Unrau, Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools, in: IEEE/ IEEM (Ed.),
2017 IEEE International Conference on Industrial Engineering and Engineering Management
(IEEM), Danvers, 2017: pp. 1571–1575.'
ieee: S. Hinrichsen, D. Riediger, and A. Unrau, “Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools,” in 2017 IEEE International
Conference on Industrial Engineering and Engineering Management (IEEM), Singapore,
2017, no. 1, pp. 1571–1575.
mla: Hinrichsen, Sven, et al. “Development of a Projection-Based Assistance System
for Maintaining Injection Molding Tools.” 2017 IEEE International Conference
on Industrial Engineering and Engineering Management (IEEM), edited by IEEE/
IEEM, no. 1, 2017, pp. 1571–75, doi:https://doi.org/10.1109/IEEM.2017.8290157.
short: 'S. Hinrichsen, D. Riediger, A. Unrau, in: IEEE/ IEEM (Ed.), 2017 IEEE International
Conference on Industrial Engineering and Engineering Management (IEEM), Danvers,
2017, pp. 1571–1575.'
ufg: 'Hinrichsen, Sven et. al. (2017): Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools, in: IEEE/ IEEM (Hg.):
2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM), Danvers, S. 1571–1575.'
van: 'Hinrichsen S, Riediger D, Unrau A. Development of a Projection-Based Assistance
System for Maintaining Injection Molding Tools. In: IEEE/ IEEM, editor. 2017 IEEE
International Conference on Industrial Engineering and Engineering Management
(IEEM). Danvers; 2017. p. 1571–5.'
conference:
end_date: 2017-12-13
location: Singapore
name: 'IEEE International Conference on Industrial Engineering and Engineering Management '
start_date: 2017-12-10
corporate_editor:
- IEEE/ IEEM
date_created: 2018-11-26T11:59:27Z
date_updated: 2023-03-15T13:49:41Z
ddc:
- '620'
department:
- _id: DEP7020
- _id: DEP1305
doi: https://doi.org/10.1109/IEEM.2017.8290157
issue: '1'
keyword:
- injection moulding
- machine tools
- maintenance engineering
- productivity
- projection-based assistance system
- injection molding tools
- assembly activities
- assembly process
- assembly errors
- tool maintenance
- disassembly activities
- economic potential
- Industrial Engineering Lab
- Ostwestfalen-Lippe University of Applied Sciences
- toolmaking
- Tools
- Injection molding
- Maintenance engineering
- Usability
- Task analysis
- Workstations
- Morphology
- assembly assistance systems
- assistance systems
- maintenance of injection molding tools
- manual assembly
language:
- iso: eng
page: 1571-1575
place: Danvers
publication: 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM)
publication_identifier:
isbn:
- '978-1-5386-0948-4 '
quality_controlled: '1'
status: public
title: Development of a Projection-Based Assistance System for Maintaining Injection
Molding Tools
type: conference
user_id: '74004'
year: 2017
...
---
_id: '432'
abstract:
- lang: eng
text: "The trend of increasing technological complexity of machines mainly correlates
with the integration of additional functions in machines. Increasing functionality
\ of the machines leads to an increased number of control \r\nelements,
which limits the clarity of the machine operation and leads to higher cognitive
demands in the machine operation. Due to the growing functional range of production
machines the demand of usability for the operating systems continues to
\ grow. The selection and design of icons for the identification of controls
\ contributes significantly to usability, especially for intuitive operation
of production machines. \r\nThe aim of this study is to investigate the
\ intuitive usability of production machines, to consider its use of graphical
\ elements (icons) and to derive recommendations for a demand-oriented
\ selection and design of icons. To achieve this goal, laboratory studies
at five modern production machines (laser sintering machine, CNC universal
\ lathe, plastic injection molding machine, laser processing machine, woodworking
\ machine) - each with different operating concept - were performed. The results
\ of the study show that the used symbols in the examined machines are
\ only limited self-explanatory and intuitive, and thus have significant
deficits for easy and intuitive operation. Especially the combination of screens
and electronic keys or switches was often criticized and leads to uncertainty
in the operation. As a result, recommendations for the design of icons on production
machines are given. "
author:
- first_name: Daniel
full_name: Riediger, Daniel
id: '52263'
last_name: Riediger
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Alexander
full_name: Schlee, Alexander
id: '48127'
last_name: Schlee
citation:
ama: 'Riediger D, Hinrichsen S, Schlee A. Ergonomic Design of Graphical Control
Elements on Production Machines. In: Villmer F-J, Padoano E, Department of Production
Engineering and Management, eds. Production Engineering and Management.
Lemgo: Hochschule Ostwestfalen-Lippe; 2015:123-130.'
apa: 'Riediger, D., Hinrichsen, S., & Schlee, A. (2015). Ergonomic Design of
Graphical Control Elements on Production Machines. In F.-J. Villmer, E. Padoano,
& Department of Production Engineering and Management, (Eds.), Production
Engineering and Management (pp. 123–130). Lemgo: Hochschule Ostwestfalen-Lippe.'
bjps: 'Riediger D, Hinrichsen S and Schlee A (2015) Ergonomic Design of Graphical
Control Elements on Production Machines. In Villmer F-J, Padoano E and Department
of Production Engineering and Management, (eds), Production Engineering and
Management. Lemgo: Hochschule Ostwestfalen-Lippe, pp. 123–130.'
chicago: 'Riediger, Daniel, Sven Hinrichsen, and Alexander Schlee. “Ergonomic Design
of Graphical Control Elements on Production Machines.” In Production Engineering
and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department
of Production Engineering and Management, 123–30. Lemgo: Hochschule Ostwestfalen-Lippe,
2015.'
chicago-de: 'Riediger, Daniel, Sven Hinrichsen und Alexander Schlee. 2015. Ergonomic
Design of Graphical Control Elements on Production Machines. In: Production
Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und
Department of Production Engineering and Management, 123–130. Lemgo: Hochschule
Ostwestfalen-Lippe.'
din1505-2-1: 'Riediger, Daniel ; Hinrichsen, Sven ; Schlee,
Alexander: Ergonomic Design of Graphical Control Elements on Production
Machines. In: Villmer, F.-J. ; Padoano, E. ; Department
of Production Engineering and Management, (Hrsg.): Production Engineering
and Management. Lemgo : Hochschule Ostwestfalen-Lippe, 2015, S. 123–130'
havard: 'D. Riediger, S. Hinrichsen, A. Schlee, Ergonomic Design of Graphical Control
Elements on Production Machines, in: F.-J. Villmer, E. Padoano, Department of
Production Engineering and Management, (Eds.), Production Engineering and Management,
Hochschule Ostwestfalen-Lippe, Lemgo, 2015: pp. 123–130.'
ieee: D. Riediger, S. Hinrichsen, and A. Schlee, “Ergonomic Design of Graphical
Control Elements on Production Machines,” in Production Engineering and Management,
Trieste, 2015, no. 1, pp. 123–130.
mla: Riediger, Daniel, et al. “Ergonomic Design of Graphical Control Elements on
Production Machines.” Production Engineering and Management, edited by
Franz-Josef Villmer et al., no. 1, Hochschule Ostwestfalen-Lippe, 2015, pp. 123–30.
short: 'D. Riediger, S. Hinrichsen, A. Schlee, in: F.-J. Villmer, E. Padoano, Department
of Production Engineering and Management, (Eds.), Production Engineering and Management,
Hochschule Ostwestfalen-Lippe, Lemgo, 2015, pp. 123–130.'
ufg: 'Riediger, Daniel et. al. (2015): Ergonomic Design of Graphical Control
Elements on Production Machines, in: Franz-Josef Villmer et. al. (Hgg.): Production
Engineering and Management, Lemgo, S. 123–130.'
van: 'Riediger D, Hinrichsen S, Schlee A. Ergonomic Design of Graphical Control
Elements on Production Machines. In: Villmer F-J, Padoano E, Department of Production
Engineering and Management, editors. Production Engineering and Management. Lemgo:
Hochschule Ostwestfalen-Lippe; 2015. p. 123–30.'
conference:
end_date: 2015-10-02
location: Trieste
name: Proceedings 5th international conference
start_date: 2015-10-01
corporate_editor:
- Department of Production Engineering and Management,
- Hochschule Ostwestfalen-Lippe
date_created: 2019-01-16T16:07:56Z
date_updated: 2023-03-15T13:49:52Z
department:
- _id: DEP7020
- _id: DEP1306
- _id: DEP1305
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
issue: '1'
keyword:
- Usability
- production mach ine
- icons
- usability
- hum an-machine compatibility
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fb7/fileadmin/download/labore/industrialengineering/pdf/Veroeffentlichungen/PEM2015_Ergonomic_Design_of_Graphical_Control_Elements_on_Production_Machines.pdf
oa: '1'
page: 123-130
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-941645-11-0
publication_status: published
publisher: Hochschule Ostwestfalen-Lippe
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fb7/fileadmin/download/labore/industrialengineering/pdf/Veroeffentlichungen/PEM2015_Ergonomic_Design_of_Graphical_Control_Elements_on_Production_Machines.pdf
status: public
title: Ergonomic Design of Graphical Control Elements on Production Machines
type: conference
user_id: '45673'
year: 2015
...
---
_id: '4330'
abstract:
- lang: eng
text: Catchwords such as “Cyber-Physical-Systems” and “Industry 4.0” describe the
current development of systems with embedded intelligence. These systems can be
characterized by an increasing technical complexity that must be addressed in
the user interface. In this paper we analyze the specific requirements posed by
the interaction with cyber-physical-systems, present a coordinated approach to
these requirements and illustrate our approach with a practical example of an
assistance system for assembly workers in an industrial production environment.
author:
- first_name: Volker
full_name: Paelke, Volker
last_name: Paelke
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Paelke V, Röcker C. User Interfaces for Cyber-Physical Systems: Challenges
and Possible Approaches. . In: Design, User Experience, and Usability: Design
Discourse. Vol 9186. Lecture Notes in Computer Science ; Information Systems
and Applications, incl. Internet/Web, and HCI. Springer; 2015:75-85. doi:10.1007/978-3-319-20886-2_8'
apa: 'Paelke, V., & Röcker, C. (2015). User Interfaces for Cyber-Physical Systems:
Challenges and Possible Approaches. . Design, User Experience, and Usability:
Design Discourse, 9186, 75–85. https://doi.org/10.1007/978-3-319-20886-2_8'
bjps: 'Paelke V and Röcker C (2015) User Interfaces for Cyber-Physical Systems:
Challenges and Possible Approaches. . Design, User Experience, and Usability:
Design Discourse, vol. 9186. Cham: Springer, pp. 75–85.'
chicago: 'Paelke, Volker, and Carsten Röcker. “User Interfaces for Cyber-Physical
Systems: Challenges and Possible Approaches. .” In Design, User Experience,
and Usability: Design Discourse, 9186:75–85. Lecture Notes in Computer Science ;
Information Systems and Applications, Incl. Internet/Web, and HCI. Cham: Springer,
2015. https://doi.org/10.1007/978-3-319-20886-2_8.'
chicago-de: 'Paelke, Volker und Carsten Röcker. 2015. User Interfaces for Cyber-Physical
Systems: Challenges and Possible Approaches. . In: Design, User Experience,
and Usability: Design Discourse, 9186:75–85. Lecture Notes in Computer Science ;
Information Systems and Applications, incl. Internet/Web, and HCI. Cham: Springer.
doi:10.1007/978-3-319-20886-2_8,
.'
din1505-2-1: 'Paelke, Volker ; Röcker, Carsten: User Interfaces for Cyber-Physical
Systems: Challenges and Possible Approaches. . In: Design, User Experience,
and Usability: Design Discourse, Lecture Notes in Computer Science ; Information
Systems and Applications, incl. Internet/Web, and HCI. Bd. 9186. Cham : Springer,
2015, S. 75–85'
havard: 'V. Paelke, C. Röcker, User Interfaces for Cyber-Physical Systems: Challenges
and Possible Approaches. , in: Design, User Experience, and Usability: Design
Discourse, Springer, Cham, 2015: pp. 75–85.'
ieee: 'V. Paelke and C. Röcker, “User Interfaces for Cyber-Physical Systems: Challenges
and Possible Approaches. ,” in Design, User Experience, and Usability: Design
Discourse, Los Angeles, CA, USA, 2015, vol. 9186, pp. 75–85. doi: 10.1007/978-3-319-20886-2_8.'
mla: 'Paelke, Volker, and Carsten Röcker. “User Interfaces for Cyber-Physical Systems:
Challenges and Possible Approaches. .” Design, User Experience, and Usability:
Design Discourse, vol. 9186, Springer, 2015, pp. 75–85, https://doi.org/10.1007/978-3-319-20886-2_8.'
short: 'V. Paelke, C. Röcker, in: Design, User Experience, and Usability: Design
Discourse, Springer, Cham, 2015, pp. 75–85.'
ufg: 'Paelke, Volker/Röcker, Carsten: User Interfaces for Cyber-Physical
Systems: Challenges and Possible Approaches. , in: o. Hg.: Design, User Experience,
and Usability: Design Discourse, Bd. 9186, Cham 2015 (Lecture Notes in Computer
Science ; Information Systems and Applications, incl. Internet/Web, and HCI),
S. 75–85.'
van: 'Paelke V, Röcker C. User Interfaces for Cyber-Physical Systems: Challenges
and Possible Approaches. . In: Design, User Experience, and Usability: Design
Discourse. Cham: Springer; 2015. p. 75–85. (Lecture Notes in Computer Science ;
Information Systems and Applications, incl. Internet/Web, and HCI; vol. 9186).'
conference:
end_date: 2015-08-07
location: Los Angeles, CA, USA
name: 4th International Conference, DUXU 2015, Held as Part of HCI International
2015
start_date: 2015-08-02
date_created: 2021-01-08T12:03:44Z
date_updated: 2025-04-11T09:03:04Z
department:
- _id: DEP5023
doi: 10.1007/978-3-319-20886-2_8
intvolume: ' 9186'
keyword:
- Industrial IT
- User-Centered design
- Usability
- User interfaces
- Cyber-Physical-Systems
- Industry 4.0
- Augmented reality
- Development processes and methods
language:
- iso: eng
page: '75-85 '
place: Cham
publication: 'Design, User Experience, and Usability: Design Discourse'
publication_identifier:
eisbn:
- 978-3-319-20886-2
isbn:
- 978-3-319-20885-5
publication_status: published
publisher: Springer
series_title: Lecture Notes in Computer Science ; Information Systems and Applications,
incl. Internet/Web, and HCI
status: public
title: 'User Interfaces for Cyber-Physical Systems: Challenges and Possible Approaches. '
type: conference
user_id: '83781'
volume: 9186
year: '2015'
...
---
_id: '4331'
abstract:
- lang: eng
text: When a user enters a personal identification number (PIN) into an automated
teller machine or a point of sale terminal, there is a risk of some one watching
from behind, trying to guess the PIN code. Such shoulder-surfing is a major security
threat. In order to overcome this problem different PIN entry methods have been
suggested. In this regard, gaze interaction methods are receiving attention in
recent years, owing to the lowering cost of eye tracking technology. In this paper,
we present SafetyPIN - an eye tracking based PIN entry system - which is aimed
at making the PIN entry more secure with the help of an eye tracking device. We
discuss the implementation and the initial evaluation of this system.
author:
- first_name: Mythreya
full_name: Seetharama, Mythreya
last_name: Seetharama
- first_name: Volker
full_name: Paelke, Volker
last_name: Paelke
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Seetharama M, Paelke V, Röcker C. SafetyPIN: Secure PIN Entry through Eye
Tracking. In: Tryfonas T, Askoxylakis I, eds. Human Aspects of Information
Security, Privacy, and Trust. Vol 9190. Lecture Notes in Computer Science ;
Information Systems and Applications, incl. Internet/Web, and HCI. Springer; 2015:426-435.
doi:10.1007/978-3-319-20376-8_38'
apa: 'Seetharama, M., Paelke, V., & Röcker, C. (2015). SafetyPIN: Secure PIN
Entry through Eye Tracking. In T. Tryfonas & I. Askoxylakis (Eds.), Human
Aspects of Information Security, Privacy, and Trust (Vol. 9190, pp. 426–435).
Springer. https://doi.org/10.1007/978-3-319-20376-8_38'
bjps: 'Seetharama M, Paelke V and Röcker C (2015) SafetyPIN: Secure PIN Entry
through Eye Tracking. In Tryfonas T and Askoxylakis I (eds), Human Aspects
of Information Security, Privacy, and Trust, vol. 9190. Cham: Springer, pp.
426–435.'
chicago: 'Seetharama, Mythreya, Volker Paelke, and Carsten Röcker. “SafetyPIN: Secure
PIN Entry through Eye Tracking.” In Human Aspects of Information Security,
Privacy, and Trust, edited by Theo Tryfonas and Ioannis Askoxylakis, 9190:426–35.
Lecture Notes in Computer Science ; Information Systems and Applications, Incl.
Internet/Web, and HCI. Cham: Springer, 2015. https://doi.org/10.1007/978-3-319-20376-8_38.'
chicago-de: 'Seetharama, Mythreya, Volker Paelke und Carsten Röcker. 2015. SafetyPIN:
Secure PIN Entry through Eye Tracking. In: Human Aspects of Information Security,
Privacy, and Trust, hg. von Theo Tryfonas und Ioannis Askoxylakis, 9190:426–435.
Lecture Notes in Computer Science ; Information Systems and Applications, incl.
Internet/Web, and HCI. Cham: Springer. doi:10.1007/978-3-319-20376-8_38,
.'
din1505-2-1: 'Seetharama, Mythreya
; Paelke, Volker ; Röcker,
Carsten: SafetyPIN: Secure PIN Entry through Eye Tracking. In: Tryfonas,
T. ; Askoxylakis, I. (Hrsg.):
Human Aspects of Information Security, Privacy, and Trust, Lecture Notes
in Computer Science ; Information Systems and Applications, incl. Internet/Web,
and HCI. Bd. 9190. Cham : Springer, 2015, S. 426–435'
havard: 'M. Seetharama, V. Paelke, C. Röcker, SafetyPIN: Secure PIN Entry through
Eye Tracking, in: T. Tryfonas, I. Askoxylakis (Eds.), Human Aspects of Information
Security, Privacy, and Trust, Springer, Cham, 2015: pp. 426–435.'
ieee: 'M. Seetharama, V. Paelke, and C. Röcker, “SafetyPIN: Secure PIN Entry through
Eye Tracking,” in Human Aspects of Information Security, Privacy, and Trust,
Los Angeles, CA, USA, 2015, vol. 9190, pp. 426–435. doi: 10.1007/978-3-319-20376-8_38.'
mla: 'Seetharama, Mythreya, et al. “SafetyPIN: Secure PIN Entry through Eye Tracking.”
Human Aspects of Information Security, Privacy, and Trust, edited by Theo
Tryfonas and Ioannis Askoxylakis, vol. 9190, Springer, 2015, pp. 426–35, https://doi.org/10.1007/978-3-319-20376-8_38.'
short: 'M. Seetharama, V. Paelke, C. Röcker, in: T. Tryfonas, I. Askoxylakis (Eds.),
Human Aspects of Information Security, Privacy, and Trust, Springer, Cham, 2015,
pp. 426–435.'
ufg: 'Seetharama, Mythreya/Paelke, Volker/Röcker, Carsten: SafetyPIN: Secure
PIN Entry through Eye Tracking, in: Tryfonas, Theo/Askoxylakis, Ioannis (Hgg.):
Human Aspects of Information Security, Privacy, and Trust, Bd. 9190, Cham 2015
(Lecture Notes in Computer Science ; Information Systems and Applications, incl.
Internet/Web, and HCI), S. 426–435.'
van: 'Seetharama M, Paelke V, Röcker C. SafetyPIN: Secure PIN Entry through Eye
Tracking. In: Tryfonas T, Askoxylakis I, editors. Human Aspects of Information
Security, Privacy, and Trust. Cham: Springer; 2015. p. 426–35. (Lecture Notes
in Computer Science ; Information Systems and Applications, incl. Internet/Web,
and HCI; vol. 9190).'
conference:
end_date: 2015-08-07
location: Los Angeles, CA, USA
name: 3. International Conference, HAS 2015, Held as Part of HCI International 2015
start_date: 2015-08-02
date_created: 2021-01-08T12:03:45Z
date_updated: 2025-04-11T09:03:48Z
department:
- _id: DEP5023
doi: 10.1007/978-3-319-20376-8_38
editor:
- first_name: Theo
full_name: Tryfonas, Theo
last_name: Tryfonas
- first_name: Ioannis
full_name: Askoxylakis, Ioannis
last_name: Askoxylakis
intvolume: ' 9190'
keyword:
- PIN entry
- Eye tracking
- Security
- Usability
- Point of sale terminals
language:
- iso: eng
page: 426-435
place: Cham
publication: Human Aspects of Information Security, Privacy, and Trust
publication_identifier:
eisbn:
- 978-3-319-20376-8
isbn:
- 978-3-319-20375-1
publication_status: published
publisher: Springer
series_title: Lecture Notes in Computer Science ; Information Systems and Applications,
incl. Internet/Web, and HCI
status: public
title: 'SafetyPIN: Secure PIN Entry through Eye Tracking'
type: conference
user_id: '83781'
volume: 9190
year: '2015'
...
---
_id: '4373'
abstract:
- lang: eng
text: Today, usability measures for the evaluation of systems and interfaces are
mostly assessed in an isolated way. This paper addresses the question whether
an integrative multi-dimensional feature evaluation can lead to different and
more holistic results. We combined traditional measures (e.g., time to task completion)
with advanced measures, like eye tracking, biosignal data logging and assessment
of user emotions. For the evaluation of emotions, we used verbal methods (PAD
Semantic Scale and a questionnaire) and a nonverbal method with EmoCards. The
overall goal was to document and analyze the interaction as completely as possible
(including effectiveness, efficiency and user satisfaction), focusing especially
on objective measurements. Furthermore, the recording and assessment of emotions,
which are part of the user experience, should give insights into user satisfaction.
author:
- first_name: Verena
full_name: Ermes, Verena
last_name: Ermes
- first_name: Armin
full_name: Janß, Armin
last_name: Janß
- first_name: Klaus
full_name: Radermacher, Klaus
last_name: Radermacher
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Ermes V, Janß A, Radermacher K, Röcker C. Analyzing the Benefits of Integrative
Multi-Dimensional Assessments of Usability Features in Interaction-Centered User
Studies. In: Hein A, Association for Computing Machinery-Digital Library, eds.
Proceedings of the 8th International Conference on Pervasive Computing Technologies
for Healthcare . Brussels, Belgium : ICST (Institute for Computer Sciences,
Social-Informatics and Telecommunications Engineering); 2014:227-230. doi:10.4108/icst.pervasivehealth.2014.255142#d73284787e1'
apa: 'Ermes, V., Janß, A., Radermacher, K., & Röcker, C. (2014). Analyzing the
Benefits of Integrative Multi-Dimensional Assessments of Usability Features in
Interaction-Centered User Studies. In A. Hein & Association for Computing
Machinery-Digital Library (Eds.), Proceedings of the 8th International Conference
on Pervasive Computing Technologies for Healthcare (pp. 227–230). Brussels,
Belgium : ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications
Engineering). https://doi.org/10.4108/icst.pervasivehealth.2014.255142#d73284787e1'
bjps: 'Ermes V et al. (2014) Analyzing the Benefits of Integrative
Multi-Dimensional Assessments of Usability Features in Interaction-Centered User
Studies. In Hein A and Association for Computing Machinery-Digital Library (eds),
Proceedings of the 8th International Conference on Pervasive Computing Technologies
for Healthcare . Brussels, Belgium : ICST (Institute for Computer Sciences,
Social-Informatics and Telecommunications Engineering), pp. 227–230.'
chicago: 'Ermes, Verena, Armin Janß, Klaus Radermacher, and Carsten Röcker. “Analyzing
the Benefits of Integrative Multi-Dimensional Assessments of Usability Features
in Interaction-Centered User Studies.” In Proceedings of the 8th International
Conference on Pervasive Computing Technologies for Healthcare , edited by
Andreas Hein and Association for Computing Machinery-Digital Library, 227–30.
Brussels, Belgium : ICST (Institute for Computer Sciences, Social-Informatics
and Telecommunications Engineering), 2014. https://doi.org/10.4108/icst.pervasivehealth.2014.255142#d73284787e1.'
chicago-de: 'Ermes, Verena, Armin Janß, Klaus Radermacher und Carsten Röcker. 2014.
Analyzing the Benefits of Integrative Multi-Dimensional Assessments of Usability
Features in Interaction-Centered User Studies. In: Proceedings of the 8th International
Conference on Pervasive Computing Technologies for Healthcare , hg. von Andreas
Hein und Association for Computing Machinery-Digital Library, 227–230. Brussels,
Belgium : ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications
Engineering). doi:10.4108/icst.pervasivehealth.2014.255142#d73284787e1,
.'
din1505-2-1: 'Ermes, Verena ; Janß, Armin ; Radermacher,
Klaus ; Röcker, Carsten:
Analyzing the Benefits of Integrative Multi-Dimensional Assessments of Usability
Features in Interaction-Centered User Studies. In: Hein,
A. ; Association for Computing Machinery-Digital
Library (Hrsg.): Proceedings of the 8th International Conference on
Pervasive Computing Technologies for Healthcare . Brussels, Belgium : ICST
(Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering),
2014, S. 227–230'
havard: 'V. Ermes, A. Janß, K. Radermacher, C. Röcker, Analyzing the Benefits of
Integrative Multi-Dimensional Assessments of Usability Features in Interaction-Centered
User Studies, in: A. Hein, Association for Computing Machinery-Digital Library
(Eds.), Proceedings of the 8th International Conference on Pervasive Computing
Technologies for Healthcare , ICST (Institute for Computer Sciences, Social-Informatics
and Telecommunications Engineering), Brussels, Belgium , 2014: pp. 227–230.'
ieee: V. Ermes, A. Janß, K. Radermacher, and C. Röcker, “Analyzing the Benefits
of Integrative Multi-Dimensional Assessments of Usability Features in Interaction-Centered
User Studies,” in Proceedings of the 8th International Conference on Pervasive
Computing Technologies for Healthcare , Oldenburg, 2014, pp. 227–230.
mla: Ermes, Verena, et al. “Analyzing the Benefits of Integrative Multi-Dimensional
Assessments of Usability Features in Interaction-Centered User Studies.” Proceedings
of the 8th International Conference on Pervasive Computing Technologies for Healthcare
, edited by Andreas Hein and Association for Computing Machinery-Digital Library, ICST
(Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering),
2014, pp. 227–30, doi:10.4108/icst.pervasivehealth.2014.255142#d73284787e1.
short: 'V. Ermes, A. Janß, K. Radermacher, C. Röcker, in: A. Hein, Association for
Computing Machinery-Digital Library (Eds.), Proceedings of the 8th International
Conference on Pervasive Computing Technologies for Healthcare , ICST (Institute
for Computer Sciences, Social-Informatics and Telecommunications Engineering),
Brussels, Belgium , 2014, pp. 227–230.'
ufg: 'Ermes, Verena et. al. (2014): Analyzing the Benefits of Integrative
Multi-Dimensional Assessments of Usability Features in Interaction-Centered User
Studies, in: Andreas Hein/Association for Computing Machinery-Digital Library
(Hgg.): Proceedings of the 8th International Conference on Pervasive Computing
Technologies for Healthcare , Brussels, Belgium , S. 227–230.'
van: 'Ermes V, Janß A, Radermacher K, Röcker C. Analyzing the Benefits of Integrative
Multi-Dimensional Assessments of Usability Features in Interaction-Centered User
Studies. In: Hein A, Association for Computing Machinery-Digital Library, editors.
Proceedings of the 8th International Conference on Pervasive Computing Technologies
for Healthcare . Brussels, Belgium : ICST (Institute for Computer Sciences, Social-Informatics
and Telecommunications Engineering); 2014. p. 227–30.'
conference:
end_date: 2014-05-23
location: Oldenburg
name: 8th International Conference on Pervasive Computing Technologies for Healthcare
start_date: 2014-05-20
corporate_editor:
- Association for Computing Machinery-Digital Library
- ACM Special Interest Group on Computer-Human Interaction
date_created: 2021-01-14T10:13:21Z
date_updated: 2023-03-15T13:49:52Z
department:
- _id: DEP5023
doi: 10.4108/icst.pervasivehealth.2014.255142#d73284787e1
editor:
- first_name: Andreas
full_name: Hein, Andreas
last_name: Hein
extern: '1'
keyword:
- Usability Measures
- User Experience
- Eye Tracking
- Biosignal Data Logging
- Emotion Evaluation
- Risk Analysis
- Medical Devices
- Integrated Usability Evaluation
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 227 - 230
place: 'Brussels, Belgium '
publication: 'Proceedings of the 8th International Conference on Pervasive Computing
Technologies for Healthcare '
publication_identifier:
unknown:
- 978-1-63190-011-2
publication_status: published
publisher: ' ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications
Engineering)'
related_material:
link:
- relation: original
url: https://doi.org/10.4108/icst.pervasivehealth.2014.255142
status: public
title: Analyzing the Benefits of Integrative Multi-Dimensional Assessments of Usability
Features in Interaction-Centered User Studies
type: conference
user_id: '15514'
year: 2014
...
---
_id: '671'
abstract:
- lang: eng
text: Additive manufacturing processes such as laser sintering are characterized
by a high rate of innovation, are a standard procedure in rapid prototyping and
are becoming increasingly important in small-series production. Despite the growing
importance of additive manufacturing processes, there are no comprehensive ergonomic
studies about work using additive manufacturing systems. This study therefore
investigates the working processes of laser sintering systems. The method is guided
by the DIN EN ISO 9241-210:2011 standard and helps to record the context of use,
to accomplish usability tests and to develop design recommendations. The outcome
of the study shows that the efficiency of the laser sintering operating process
can be significantly increased by implementing ergonomic recommendations and consequently
further improve the employees’ working conditions.
author:
- first_name: Daniel
full_name: Riediger, Daniel
id: '52263'
last_name: Riediger
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
id: '14290'
last_name: Villmer
citation:
ama: 'Riediger D, Hinrichsen S, Villmer F-J. Ergonomic Design of Laser Sintering
Systems - Results of an Empirical Study. In: Villmer F-J, Padoano E, Department
of Production Engineering and Management, eds. Production Engineering and Management.
Lemgo: Hochschule Ostwestfalen-Lippe; 2014:61-68.'
apa: 'Riediger, D., Hinrichsen, S., & Villmer, F.-J. (2014). Ergonomic Design
of Laser Sintering Systems - Results of an Empirical Study. In F.-J. Villmer,
E. Padoano, & Department of Production Engineering and Management, (Eds.),
Production Engineering and Management (pp. 61–68). Lemgo: Hochschule Ostwestfalen-Lippe.'
bjps: 'Riediger D, Hinrichsen S and Villmer F-J (2014) Ergonomic Design of
Laser Sintering Systems - Results of an Empirical Study. In Villmer F-J, Padoano
E and Department of Production Engineering and Management, (eds), Production
Engineering and Management. Lemgo: Hochschule Ostwestfalen-Lippe, pp. 61–68.'
chicago: 'Riediger, Daniel, Sven Hinrichsen, and Franz-Josef Villmer. “Ergonomic
Design of Laser Sintering Systems - Results of an Empirical Study.” In Production
Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and
Department of Production Engineering and Management, 61–68. Lemgo: Hochschule
Ostwestfalen-Lippe, 2014.'
chicago-de: 'Riediger, Daniel, Sven Hinrichsen und Franz-Josef Villmer. 2014. Ergonomic
Design of Laser Sintering Systems - Results of an Empirical Study. In: Production
Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und
Department of Production Engineering and Management, 61–68. Lemgo: Hochschule
Ostwestfalen-Lippe.'
din1505-2-1: 'Riediger, Daniel ; Hinrichsen, Sven ; Villmer,
Franz-Josef: Ergonomic Design of Laser Sintering Systems - Results of an
Empirical Study. In: Villmer, F.-J.
; Padoano, E. ; Department
of Production Engineering and Management, (Hrsg.): Production Engineering
and Management. Lemgo : Hochschule Ostwestfalen-Lippe, 2014, S. 61–68'
havard: 'D. Riediger, S. Hinrichsen, F.-J. Villmer, Ergonomic Design of Laser Sintering
Systems - Results of an Empirical Study, in: F.-J. Villmer, E. Padoano, Department
of Production Engineering and Management, (Eds.), Production Engineering and Management,
Hochschule Ostwestfalen-Lippe, Lemgo, 2014: pp. 61–68.'
ieee: D. Riediger, S. Hinrichsen, and F.-J. Villmer, “Ergonomic Design of Laser
Sintering Systems - Results of an Empirical Study,” in Production Engineering
and Management, Lemgo, 2014, no. 10, pp. 61–68.
mla: Riediger, Daniel, et al. “Ergonomic Design of Laser Sintering Systems - Results
of an Empirical Study.” Production Engineering and Management, edited by
Franz-Josef Villmer et al., no. 10, Hochschule Ostwestfalen-Lippe, 2014, pp. 61–68.
short: 'D. Riediger, S. Hinrichsen, F.-J. Villmer, in: F.-J. Villmer, E. Padoano,
Department of Production Engineering and Management, (Eds.), Production Engineering
and Management, Hochschule Ostwestfalen-Lippe, Lemgo, 2014, pp. 61–68.'
ufg: 'Riediger, Daniel et. al. (2014): Ergonomic Design of Laser Sintering
Systems - Results of an Empirical Study, in: Franz-Josef Villmer et. al. (Hgg.):
Production Engineering and Management, Lemgo, S. 61–68.'
van: 'Riediger D, Hinrichsen S, Villmer F-J. Ergonomic Design of Laser Sintering
Systems - Results of an Empirical Study. In: Villmer F-J, Padoano E, Department
of Production Engineering and Management, editors. Production Engineering and
Management. Lemgo: Hochschule Ostwestfalen-Lippe; 2014. p. 61–8.'
conference:
end_date: 2014-09-26
location: Lemgo
name: Proceedings 4th International Conference of Production Engineering and Management
start_date: 2014-09-25
corporate_editor:
- Department of Production Engineering and Management,
- Hochschule Ostwestfalen-Lippe
date_created: 2019-01-16T16:07:56Z
date_updated: 2023-03-15T13:50:07Z
department:
- _id: DEP7020
- _id: DEP1305
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
issue: '10'
keyword:
- ergonomic design
- additive manufacturing
- laser sintering
- usability
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fb7/fileadmin/download/labore/industrialengineering/pdf/Veroeffentlichungen/PEM_2014_Ergonomic_Design_of_Laser_Sintering_Systems_-_Results_of_an_empirical_study.pdf
oa: '1'
page: 61-68
place: Lemgo
publication: Production Engineering and Management
publication_status: published
publisher: Hochschule Ostwestfalen-Lippe
quality_controlled: '1'
status: public
title: Ergonomic Design of Laser Sintering Systems - Results of an Empirical Study
type: conference
user_id: '49010'
year: 2014
...
---
_id: '4492'
abstract:
- lang: eng
text: In most countries demographic developments tend towards more and more elderly
people in single households. Improving the quality of life for elderly people
is an emerging issue within our information society. Good user interfaces have
tremendous implications for appropriate accessibility. Though, user interfaces
should not only be easily accessible, they should also be useful, usable and most
of all enjoyable and a benefit for people. Traditionally, Human–Computer Interaction
(HCI) bridges Natural Sciences (Psychology) and Engineering (Informatics/Computer
Science), whilst Usability Engineering (UE) is anchored in Software Technology
and supports the actual implemen-tation. Together, HCI and UE have a powerful
potential to help towards making technology a little bit more accessible, useful,
useable and enjoyable for everybody.
author:
- first_name: Andreas
full_name: Holzinger, Andreas
last_name: Holzinger
- first_name: Martina
full_name: Ziefle, Martina
last_name: Ziefle
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Holzinger A, Ziefle M, Röcker C. Human-Computer Interaction and Usability
Engineering for Elderly (HCI4AGING): Introduction to the Special Thematic Session.
In: Miesenberger K, Klaus J, Zagler W, Karshmer A, eds. Computers Helping
People with Special Needs, Part II. Vol 6180. Lecture Notes in Computer Science.
Berlin: Springer; 2010:556-559. doi:10.1007/978-3-642-14100-3_83'
apa: 'Holzinger, A., Ziefle, M., & Röcker, C. (2010). Human-Computer Interaction
and Usability Engineering for Elderly (HCI4AGING): Introduction to the Special
Thematic Session. In K. Miesenberger, J. Klaus, W. Zagler, & A. Karshmer
(Eds.), Computers Helping People with Special Needs, Part II (Vol. 6180,
pp. 556–559). Berlin: Springer. https://doi.org/10.1007/978-3-642-14100-3_83'
bjps: 'Holzinger A, Ziefle M and Röcker C (2010) Human-Computer Interaction
and Usability Engineering for Elderly (HCI4AGING): Introduction to the Special
Thematic Session. In Miesenberger K et al. (eds), Computers Helping People
with Special Needs, Part II, vol. 6180. Berlin: Springer, pp. 556–559.'
chicago: 'Holzinger, Andreas, Martina Ziefle, and Carsten Röcker. “Human-Computer
Interaction and Usability Engineering for Elderly (HCI4AGING): Introduction to
the Special Thematic Session.” In Computers Helping People with Special Needs,
Part II, edited by K. Miesenberger, J. Klaus, W. Zagler, and A. Karshmer,
6180:556–59. Lecture Notes in Computer Science. Berlin: Springer, 2010. https://doi.org/10.1007/978-3-642-14100-3_83.'
chicago-de: 'Holzinger, Andreas, Martina Ziefle und Carsten Röcker. 2010. Human-Computer
Interaction and Usability Engineering for Elderly (HCI4AGING): Introduction to
the Special Thematic Session. In: Computers Helping People with Special Needs,
Part II, hg. von K. Miesenberger, J. Klaus, W. Zagler, und A. Karshmer, 6180:556–559.
Lecture Notes in Computer Science. Berlin: Springer. doi:10.1007/978-3-642-14100-3_83,
.'
din1505-2-1: 'Holzinger, Andreas ;
Ziefle, Martina ; Röcker,
Carsten: Human-Computer Interaction and Usability Engineering for Elderly
(HCI4AGING): Introduction to the Special Thematic Session. In:
Miesenberger, K. ; Klaus, J.
; Zagler, W. ; Karshmer,
A. (Hrsg.): Computers Helping People with Special Needs, Part II,
Lecture Notes in Computer Science. Bd. 6180. Berlin : Springer, 2010, S. 556–559'
havard: 'A. Holzinger, M. Ziefle, C. Röcker, Human-Computer Interaction and Usability
Engineering for Elderly (HCI4AGING): Introduction to the Special Thematic Session,
in: K. Miesenberger, J. Klaus, W. Zagler, A. Karshmer (Eds.), Computers Helping
People with Special Needs, Part II, Springer, Berlin, 2010: pp. 556–559.'
ieee: 'A. Holzinger, M. Ziefle, and C. Röcker, “Human-Computer Interaction and Usability
Engineering for Elderly (HCI4AGING): Introduction to the Special Thematic Session,”
in Computers Helping People with Special Needs, Part II, Vienna, Austria,
2010, vol. 6180, pp. 556–559.'
mla: 'Holzinger, Andreas, et al. “Human-Computer Interaction and Usability Engineering
for Elderly (HCI4AGING): Introduction to the Special Thematic Session.” Computers
Helping People with Special Needs, Part II, edited by K. Miesenberger et
al., vol. 6180, Springer, 2010, pp. 556–59, doi:10.1007/978-3-642-14100-3_83.'
short: 'A. Holzinger, M. Ziefle, C. Röcker, in: K. Miesenberger, J. Klaus, W. Zagler,
A. Karshmer (Eds.), Computers Helping People with Special Needs, Part II, Springer,
Berlin, 2010, pp. 556–559.'
ufg: 'Holzinger, Andreas et. al. (2010): Human-Computer Interaction and Usability
Engineering for Elderly (HCI4AGING): Introduction to the Special Thematic Session,
in: K. Miesenberger et. al. (Hgg.): Computers Helping People with Special
Needs, Part II (=Lecture Notes in Computer Science 6180), Berlin, S.
556–559.'
van: 'Holzinger A, Ziefle M, Röcker C. Human-Computer Interaction and Usability
Engineering for Elderly (HCI4AGING): Introduction to the Special Thematic Session.
In: Miesenberger K, Klaus J, Zagler W, Karshmer A, editors. Computers Helping
People with Special Needs, Part II. Berlin: Springer; 2010. p. 556–9. (Lecture
Notes in Computer Science; vol. 6180).'
conference:
end_date: 2010-07-16
location: Vienna, Austria
name: 12th International Conference, ICCHP 2010
start_date: 2010-07-14
date_created: 2021-01-21T09:21:23Z
date_updated: 2023-03-15T13:49:53Z
department:
- _id: DEP5023
doi: 10.1007/978-3-642-14100-3_83
editor:
- first_name: K.
full_name: ' Miesenberger, K.'
last_name: ' Miesenberger'
- first_name: J.
full_name: Klaus, J.
last_name: Klaus
- first_name: W.
full_name: Zagler, W.
last_name: Zagler
- first_name: A.
full_name: Karshmer, A.
last_name: Karshmer
extern: '1'
intvolume: ' 6180'
keyword:
- Human–Computer Interaction
- Usability Engineering
- User Interfaces
- Elderly People
- Older Adults
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 556-559
place: Berlin
publication: Computers Helping People with Special Needs, Part II
publication_identifier:
eisbn:
- 978-3-642-14100-3
isbn:
- 978-3-642-14099-0
publication_status: published
publisher: Springer
series_title: Lecture Notes in Computer Science
status: public
title: 'Human-Computer Interaction and Usability Engineering for Elderly (HCI4AGING):
Introduction to the Special Thematic Session'
type: conference
user_id: '15514'
volume: 6180
year: 2010
...