[{"_id":"7983","publication":"Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing","series_title":"Processes : open access journal ","title":"Considerations of the impacts of cell-specific growth and production rate on clone selection – a simulation study","place":"Basel","citation":{"mla":"Hernández Rodriguez, Tanja, et al. “Considerations of the Impacts of Cell-Specific Growth and Production Rate on Clone Selection – a Simulation Study.” Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing, vol. special issue, MDPI, 2021, pp. 49–74, https://doi.org/10.3390/pr9060964.","apa":"Hernández Rodriguez, T., Morerod, S., Pörtner, R., Wurm, F. M., & Frahm, B. (2021). Considerations of the impacts of cell-specific growth and production rate on clone selection – a simulation study. In Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing: Vol. special issue (pp. 49–74). MDPI. https://doi.org/10.3390/pr9060964","short":"T. Hernández Rodriguez, S. Morerod, R. Pörtner, F.M. Wurm, B. Frahm, in: Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing, MDPI, Basel, 2021, pp. 49–74.","chicago-de":"Hernández Rodriguez, Tanja, Sophie Morerod, Ralf Pörtner, Florian M. Wurm und Björn Frahm. 2021. Considerations of the impacts of cell-specific growth and production rate on clone selection – a simulation study. In: Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing, special issue:49–74. Processes : open access journal . Basel: MDPI. doi:10.3390/pr9060964, .","ufg":"Hernández Rodriguez, Tanja u. a.: Considerations of the impacts of cell-specific growth and production rate on clone selection – a simulation study, in: o. Hg.: Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing, Band special issue, Basel 2021 (Processes : open access journal ), S. 49–74.","havard":"T. Hernández Rodriguez, S. Morerod, R. Pörtner, F.M. Wurm, B. Frahm, Considerations of the impacts of cell-specific growth and production rate on clone selection – a simulation study, in: Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing, MDPI, Basel, 2021: pp. 49–74.","din1505-2-1":"Hernández Rodriguez, Tanja ; Morerod, Sophie ; Pörtner, Ralf ; Wurm, Florian M. ; Frahm, Björn: Considerations of the impacts of cell-specific growth and production rate on clone selection – a simulation study. In: Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing, Processes : open access journal . Bd. special issue. Basel : MDPI, 2021, S. 49–74","bjps":"Hernández Rodriguez T et al. (2021) Considerations of the Impacts of Cell-Specific Growth and Production Rate on Clone Selection – a Simulation Study. Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing, vol. special issue. Basel: MDPI, pp. 49–74.","chicago":"Hernández Rodriguez, Tanja, Sophie Morerod, Ralf Pörtner, Florian M. Wurm, and Björn Frahm. “Considerations of the Impacts of Cell-Specific Growth and Production Rate on Clone Selection – a Simulation Study.” In Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing, special issue:49–74. Processes : Open Access Journal . Basel: MDPI, 2021. https://doi.org/10.3390/pr9060964.","ieee":"T. Hernández Rodriguez, S. Morerod, R. Pörtner, F. M. Wurm, and B. Frahm, “Considerations of the impacts of cell-specific growth and production rate on clone selection – a simulation study,” in Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing, vol. special issue, Basel: MDPI, 2021, pp. 49–74. doi: 10.3390/pr9060964.","van":"Hernández Rodriguez T, Morerod S, Pörtner R, Wurm FM, Frahm B. Considerations of the impacts of cell-specific growth and production rate on clone selection – a simulation study. In: Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing. Basel: MDPI; 2021. p. 49–74. (Processes : open access journal ; vol. special issue).","ama":"Hernández Rodriguez T, Morerod S, Pörtner R, Wurm FM, Frahm B. Considerations of the impacts of cell-specific growth and production rate on clone selection – a simulation study. In: Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing. Vol special issue. Processes : open access journal . MDPI; 2021:49-74. doi:10.3390/pr9060964"},"date_created":"2022-05-05T12:55:52Z","language":[{"iso":"eng"}],"volume":"special issue","publication_status":"published","author":[{"first_name":"Tanja","id":"52466","last_name":"Hernández Rodriguez","full_name":"Hernández Rodriguez, Tanja"},{"last_name":"Morerod","full_name":"Morerod, Sophie","first_name":"Sophie"},{"last_name":"Pörtner","full_name":"Pörtner, Ralf","first_name":"Ralf"},{"first_name":"Florian M.","full_name":"Wurm, Florian M.","last_name":"Wurm"},{"first_name":"Björn","last_name":"Frahm","id":"45666","full_name":"Frahm, Björn"}],"publication_identifier":{"eisbn":["978-3-0365-5209-5"],"isbn":["978-3-0365-5210-1"],"issn":["2227-9717 "]},"abstract":[{"lang":"eng","text":"For the manufacturing of complex biopharmaceuticals using bioreactors with cultivated mammalian cells, high product concentration is an important objective. The phenotype of the cells in a reactor plays an important role. Are clonal cell populations showing high cell-specific growth rates more favorable than cell lines with higher cell-specific productivities or vice versa? Five clonal Chinese hamster ovary cell populations were analyzed based on the data of a 3-month-stability study. We adapted a mechanistic cell culture model to the experimental data of one such clonally derived cell population. Uncertainties and prior knowledge concerning model parameters were considered using Bayesian parameter estimations. This model was used then to define an inoculum train protocol. Based on this, we subsequently simulated the impacts of differences in growth rates (±10%) and production rates (±10% and ±50%) on the overall cultivation time, including making the inoculum train cultures; the final production phase, the volumetric titer in that bioreactor and the ratio of both, defined as overall process productivity. We showed thus unequivocally that growth rates have a higher impact (up to three times) on overall process productivity and for product output per year, whereas cells with higher productivity can potentially generate higher product concentrations in the production vessel."}],"page":"49-74","keyword":["clonal cell population","phenotypic diversity","inoculum train","uncertainty-based","cell culture model","biopharmaceutical manufacturing"],"status":"public","year":"2021","user_id":"83781","department":[{"_id":"DEP4021"}],"date_updated":"2023-08-16T09:17:50Z","doi":"10.3390/pr9060964","quality_controlled":"1","publisher":"MDPI","type":"book_chapter"},{"department":[{"_id":"DEP4021"}],"year":"2021","user_id":"83781","status":"public","keyword":["Biocatalysis","Monte Carlo methods","Fed-batch strategy","Model-assisted design of experiments","Quality by design"],"page":"683-700","abstract":[{"text":"Bioprocess development and optimization are still cost- and time-intensive due to the enormous number of experiments involved. In this study, the recently introduced model-assisted Design of Experiments (mDoE) concept (Möller et al. in Bioproc Biosyst Eng 42(5):867, https://doi.org/10.1007/s00449-019-02089-7, 2019) was extended and implemented into a software (“mDoE-toolbox”) to significantly reduce the number of required cultivations. The application of the toolbox is exemplary shown in two case studies with Saccharomyces cerevisiae. In the first case study, a fed-batch process was optimized with respect to the pH value and linearly rising feeding rates of glucose and nitrogen source. Using the mDoE-toolbox, the biomass concentration was increased by 30% compared to previously performed experiments. The second case study was the whole-cell biocatalysis of ethyl acetoacetate (EAA) to (S)-ethyl-3-hydroxybutyrate (E3HB), for which the feeding rates of glucose, nitrogen source, and EAA were optimized. An increase of 80% compared to a previously performed experiment with similar initial conditions was achieved for the E3HB concentration.","lang":"eng"}],"type":"scientific_journal_article","publisher":"Springer","issue":"4","quality_controlled":"1","doi":"10.1007/s00449-020-02478-3","date_updated":"2023-08-21T07:55:05Z","publication":"Bioprocess and Biosystems Engineering","_id":"7986","publication_identifier":{"isbn":["1615-7591"],"eissn":["1615-7605"]},"author":[{"first_name":"André","full_name":"Moser, André","last_name":"Moser"},{"last_name":"Kuchemüller","full_name":"Kuchemüller, Kim B.","first_name":"Kim B."},{"full_name":"Deppe, Sahar","last_name":"Deppe","first_name":"Sahar"},{"id":"52466","last_name":"Hernández Rodriguez","full_name":"Hernández Rodriguez, Tanja","first_name":"Tanja"},{"full_name":"Frahm, Björn","id":"45666","last_name":"Frahm","first_name":"Björn"},{"first_name":"Ralf","full_name":"Pörtner, Ralf","last_name":"Pörtner"},{"full_name":"Hass, Volker C.","last_name":"Hass","first_name":"Volker C."},{"first_name":"Johannes","last_name":"Möller","full_name":"Möller, Johannes"}],"intvolume":" 44","language":[{"iso":"eng"}],"date_created":"2022-05-05T13:10:11Z","publication_status":"published","volume":44,"place":"Berlin ; Heidelberg [u.a.]","citation":{"havard":"A. Moser, K.B. Kuchemüller, S. Deppe, T. Hernández Rodriguez, B. Frahm, R. Pörtner, V.C. Hass, J. Möller, Model-assisted DoE software: Optimization of growth and biocatalysis in Saccharomyces cerevisiae bioprocesses, Bioprocess and Biosystems Engineering. 44 (2021) 683–700.","chicago-de":"Moser, André, Kim B. Kuchemüller, Sahar Deppe, Tanja Hernández Rodriguez, Björn Frahm, Ralf Pörtner, Volker C. Hass und Johannes Möller. 2021. Model-assisted DoE software: Optimization of growth and biocatalysis in Saccharomyces cerevisiae bioprocesses. Bioprocess and Biosystems Engineering 44, Nr. 4: 683–700. doi:10.1007/s00449-020-02478-3, .","ufg":"Moser, André u. a.: Model-assisted DoE software: Optimization of growth and biocatalysis in Saccharomyces cerevisiae bioprocesses, in: Bioprocess and Biosystems Engineering 44 (2021), H. 4, S. 683–700.","apa":"Moser, A., Kuchemüller, K. B., Deppe, S., Hernández Rodriguez, T., Frahm, B., Pörtner, R., Hass, V. C., & Möller, J. (2021). Model-assisted DoE software: Optimization of growth and biocatalysis in Saccharomyces cerevisiae bioprocesses. Bioprocess and Biosystems Engineering, 44(4), 683–700. https://doi.org/10.1007/s00449-020-02478-3","mla":"Moser, André, et al. “Model-Assisted DoE Software: Optimization of Growth and Biocatalysis in Saccharomyces Cerevisiae Bioprocesses.” Bioprocess and Biosystems Engineering, vol. 44, no. 4, 2021, pp. 683–700, https://doi.org/10.1007/s00449-020-02478-3.","short":"A. Moser, K.B. Kuchemüller, S. Deppe, T. Hernández Rodriguez, B. Frahm, R. Pörtner, V.C. Hass, J. Möller, Bioprocess and Biosystems Engineering 44 (2021) 683–700.","ama":"Moser A, Kuchemüller KB, Deppe S, et al. Model-assisted DoE software: Optimization of growth and biocatalysis in Saccharomyces cerevisiae bioprocesses. Bioprocess and Biosystems Engineering. 2021;44(4):683-700. doi:10.1007/s00449-020-02478-3","van":"Moser A, Kuchemüller KB, Deppe S, Hernández Rodriguez T, Frahm B, Pörtner R, et al. Model-assisted DoE software: Optimization of growth and biocatalysis in Saccharomyces cerevisiae bioprocesses. Bioprocess and Biosystems Engineering. 2021;44(4):683–700.","ieee":"A. Moser et al., “Model-assisted DoE software: Optimization of growth and biocatalysis in Saccharomyces cerevisiae bioprocesses,” Bioprocess and Biosystems Engineering, vol. 44, no. 4, pp. 683–700, 2021, doi: 10.1007/s00449-020-02478-3.","chicago":"Moser, André, Kim B. Kuchemüller, Sahar Deppe, Tanja Hernández Rodriguez, Björn Frahm, Ralf Pörtner, Volker C. Hass, and Johannes Möller. “Model-Assisted DoE Software: Optimization of Growth and Biocatalysis in Saccharomyces Cerevisiae Bioprocesses.” Bioprocess and Biosystems Engineering 44, no. 4 (2021): 683–700. https://doi.org/10.1007/s00449-020-02478-3.","din1505-2-1":"Moser, André ; Kuchemüller, Kim B. ; Deppe, Sahar ; Hernández Rodriguez, Tanja ; Frahm, Björn ; Pörtner, Ralf ; Hass, Volker C. ; Möller, Johannes: Model-assisted DoE software: Optimization of growth and biocatalysis in Saccharomyces cerevisiae bioprocesses. In: Bioprocess and Biosystems Engineering Bd. 44. Berlin ; Heidelberg [u.a.], Springer (2021), Nr. 4, S. 683–700","bjps":"Moser A et al. (2021) Model-Assisted DoE Software: Optimization of Growth and Biocatalysis in Saccharomyces Cerevisiae Bioprocesses. Bioprocess and Biosystems Engineering 44, 683–700."},"title":"Model-assisted DoE software: Optimization of growth and biocatalysis in Saccharomyces cerevisiae bioprocesses"},{"title":"Utilization of the Asset Administration Shell for the Generation of Dynamic Simulation Models","language":[{"iso":"eng"}],"date_created":"2022-06-22T14:14:28Z","publication_status":"published","place":"[Piscataway, NJ]","citation":{"din1505-2-1":"Göllner, D. ; Pawlik, Thomas ; Schulte, Thomas ; IEEE Singapore Section ; IEEE TEMS Singapore Chapter, ; IEEE TEMS Hong Kong Chapter (Hrsg.): Utilization of the Asset Administration Shell for the Generation of Dynamic Simulation Models, IEEE International Conference on Industrial Engineering and Engineering Management . [Piscataway, NJ] : IEEE, 2021","bjps":"Göllner D, Pawlik T and Schulte T (2021) Utilization of the Asset Administration Shell for the Generation of Dynamic Simulation Models, IEEE Singapore Section, IEEE TEMS Singapore Chapter, and IEEE TEMS Hong Kong Chapter (eds). [Piscataway, NJ]: IEEE.","chicago":"Göllner, D., Thomas Pawlik, and Thomas Schulte. Utilization of the Asset Administration Shell for the Generation of Dynamic Simulation Models. Edited by IEEE Singapore Section, IEEE TEMS Singapore Chapter, and IEEE TEMS Hong Kong Chapter. 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE International Conference on Industrial Engineering and Engineering Management . [Piscataway, NJ]: IEEE, 2021. https://doi.org/10.1109/IEEM50564.2021.9673089.","ieee":"D. Göllner, T. Pawlik, and T. Schulte, Utilization of the Asset Administration Shell for the Generation of Dynamic Simulation Models. [Piscataway, NJ]: IEEE, 2021, pp. 808–812. doi: 10.1109/IEEM50564.2021.9673089.","ama":"Göllner D, Pawlik T, Schulte T. Utilization of the Asset Administration Shell for the Generation of Dynamic Simulation Models. (IEEE Singapore Section, IEEE TEMS Singapore Chapter,, IEEE TEMS Hong Kong Chapter, eds.). IEEE; 2021:808-812. doi:10.1109/IEEM50564.2021.9673089","van":"Göllner D, Pawlik T, Schulte T. Utilization of the Asset Administration Shell for the Generation of Dynamic Simulation Models. IEEE Singapore Section, IEEE TEMS Singapore Chapter,, IEEE TEMS Hong Kong Chapter, editors. 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). [Piscataway, NJ]: IEEE; 2021. (IEEE International Conference on Industrial Engineering and Engineering Management ).","mla":"Göllner, D., et al. “Utilization of the Asset Administration Shell for the Generation of Dynamic Simulation Models.” 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), edited by IEEE Singapore Section et al., IEEE, 2021, pp. 808–12, https://doi.org/10.1109/IEEM50564.2021.9673089.","apa":"Göllner, D., Pawlik, T., & Schulte, T. (2021). Utilization of the Asset Administration Shell for the Generation of Dynamic Simulation Models. In IEEE Singapore Section, IEEE TEMS Singapore Chapter, & IEEE TEMS Hong Kong Chapter (Eds.), 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) (pp. 808–812). IEEE. https://doi.org/10.1109/IEEM50564.2021.9673089","short":"D. Göllner, T. Pawlik, T. Schulte, Utilization of the Asset Administration Shell for the Generation of Dynamic Simulation Models, IEEE, [Piscataway, NJ], 2021.","chicago-de":"Göllner, D., Thomas Pawlik und Thomas Schulte. 2021. Utilization of the Asset Administration Shell for the Generation of Dynamic Simulation Models. Hg. von IEEE Singapore Section, IEEE TEMS Singapore Chapter, und IEEE TEMS Hong Kong Chapter. 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE International Conference on Industrial Engineering and Engineering Management . [Piscataway, NJ]: IEEE. doi:10.1109/IEEM50564.2021.9673089, .","ufg":"Göllner, D./Pawlik, Thomas/Schulte, Thomas: Utilization of the Asset Administration Shell for the Generation of Dynamic Simulation Models, hg. von IEEE Singapore Section/IEEE TEMS Singapore Chapter,, IEEE TEMS Hong Kong Chapter, [Piscataway, NJ] 2021 (IEEE International Conference on Industrial Engineering and Engineering Management ).","havard":"D. Göllner, T. Pawlik, T. Schulte, Utilization of the Asset Administration Shell for the Generation of Dynamic Simulation Models, IEEE, [Piscataway, NJ], 2021."},"publication_identifier":{"issn":["2157-3611"],"isbn":["978-1-6654-3772-1 "],"eisbn":["978-1-6654-3771-4"]},"author":[{"full_name":"Göllner, D.","last_name":"Göllner","first_name":"D."},{"id":"58915","last_name":"Pawlik","full_name":"Pawlik, Thomas","first_name":"Thomas"},{"first_name":"Thomas","full_name":"Schulte, Thomas","id":"46242","last_name":"Schulte"}],"_id":"8384","publication":"2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM)","series_title":"IEEE International Conference on Industrial Engineering and Engineering Management ","date_updated":"2025-06-26T13:38:36Z","doi":"10.1109/IEEM50564.2021.9673089","publisher":"IEEE","type":"conference_editor_article","conference":{"location":"Online (Singapore)","start_date":"2021-12-13","end_date":"2021-12-16","name":"2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM)"},"page":"808-812","abstract":[{"lang":"eng","text":"ynamic simulation models are widely utilized to evaluate complex technical components and systems like electric drives or machines. They can support the development process of a production machine by avoiding an inadequate layout of components or an erroneous control design. However, the effort for building them is often too high for this purpose (lot size one). An automated model generation can be utilized to overcome the gap between efforts and advantages of dynamic simulations.\r\n\r\nThis contribution presents an approach for simplifying the dynamic model generation of production machines by using the so-called Asset Administration Shell defined by the initiative Platform Industrie 4.0. The Asset Administration Shell was developed to aggregate all data necessary for maintaining the product across its life cycle. This includes component data and models as well as structural information about a machine. The generation process is performed by using the common FMI standard and a two-step procedure which allows the linkage of different simulation tools. The model generation is demonstrated by an example layout of a machine's internal direct current grid."}],"keyword":["Digital Twin","Asset Administration Shell","Dynamic Simulation Model","Industry 4.0","Automated Model Generation"],"status":"public","department":[{"_id":"DEP6020"},{"_id":"DEP5022"}],"corporate_editor":["IEEE Singapore Section","IEEE TEMS Singapore Chapter,","IEEE TEMS Hong Kong Chapter"],"user_id":"83781","year":"2021"},{"date_updated":"2023-03-15T13:50:08Z","doi":"10.1007/s41449-021-00296-1","title":"Cognitive compatibility in modern manual mixed-model assembly systems","quality_controlled":"1","citation":{"ama":"Bläsing D, Bornewasser M, Hinrichsen S. Cognitive compatibility in modern manual mixed-model assembly systems. Zeitschrift für Arbeitswissenschaft. 2021. doi:10.1007/s41449-021-00296-1","van":"Bläsing D, Bornewasser M, Hinrichsen S. Cognitive compatibility in modern manual mixed-model assembly systems. Zeitschrift für Arbeitswissenschaft. 2021;","havard":"D. Bläsing, M. Bornewasser, S. Hinrichsen, Cognitive compatibility in modern manual mixed-model assembly systems, Zeitschrift Für Arbeitswissenschaft. (2021).","ieee":"D. Bläsing, M. Bornewasser, and S. Hinrichsen, “Cognitive compatibility in modern manual mixed-model assembly systems,” Zeitschrift für Arbeitswissenschaft, 2021.","chicago-de":"Bläsing, Dominic, Manfred Bornewasser und Sven Hinrichsen. 2021. Cognitive compatibility in modern manual mixed-model assembly systems. Zeitschrift für Arbeitswissenschaft. doi:10.1007/s41449-021-00296-1, .","chicago":"Bläsing, Dominic, Manfred Bornewasser, and Sven Hinrichsen. “Cognitive Compatibility in Modern Manual Mixed-Model Assembly Systems.” Zeitschrift Für Arbeitswissenschaft, 2021. https://doi.org/10.1007/s41449-021-00296-1.","ufg":"Bläsing, Dominic et. al. (2021): Cognitive compatibility in modern manual mixed-model assembly systems, in: Zeitschrift für Arbeitswissenschaft.","mla":"Bläsing, Dominic, et al. “Cognitive Compatibility in Modern Manual Mixed-Model Assembly Systems.” Zeitschrift Für Arbeitswissenschaft, Springer, 2021, doi:10.1007/s41449-021-00296-1.","apa":"Bläsing, D., Bornewasser, M., & Hinrichsen, S. (2021). Cognitive compatibility in modern manual mixed-model assembly systems. Zeitschrift Für Arbeitswissenschaft. https://doi.org/10.1007/s41449-021-00296-1","din1505-2-1":"Bläsing, Dominic ; Bornewasser, Manfred ; Hinrichsen, Sven: Cognitive compatibility in modern manual mixed-model assembly systems. In: Zeitschrift für Arbeitswissenschaft, Springer (2021)","bjps":"Bläsing D, Bornewasser M and Hinrichsen S (2021) Cognitive Compatibility in Modern Manual Mixed-Model Assembly Systems. Zeitschrift für Arbeitswissenschaft.","short":"D. Bläsing, M. Bornewasser, S. Hinrichsen, Zeitschrift Für Arbeitswissenschaft (2021)."},"publication_status":"published","publisher":"Springer","language":[{"iso":"eng"}],"date_created":"2021-12-21T17:13:23Z","author":[{"full_name":"Bläsing, Dominic","last_name":"Bläsing","first_name":"Dominic"},{"last_name":"Bornewasser","full_name":"Bornewasser, Manfred","first_name":"Manfred"},{"last_name":"Hinrichsen","id":"49010","full_name":"Hinrichsen, Sven","first_name":"Sven"}],"type":"journal_article","publication_identifier":{"issn":["0340-2444","2366-4681"]},"abstract":[{"text":"The compatibility concept is widely used in psychology and ergonomics. It describes the fit between elements of a sociotechnical system which is a prerequisite to successfully cooperate towards a common goal. For at least three decades, cognitive compatibility is of increasing importance. It describes the fit of externally presented information, information processing, and the required motor action. However, with increasing system complexity, probability for incompatibility increases, too, leading to time losses, errors and overall degraded performance. The elimination of cognitive incompatibilities through ergonomic measures at the workplace requires a lot of creativity and effort. Using practical examples from mixed-model assembly, improved information management and the use of informational assistance systems are discussed as promising ergonomic approaches. The ultimate goal is to avoid cognitive overload, for example in part picking or assembly tools choosing. To find a fit between externally mediated work instructions via displays and the subjectively used internal models and competencies is a challenging task. Only if this fit is given the system is perceived as beneficial. To achieve this, the assistance system should be configurable to fit individual needs as far as possible. Successful system design requires early participation and comprehensive integration of the assistance systems into the existing IT infrastructure.\r\n\r\nPractical relevance: Varied manual assembly requires a high degree of cognitive work. A rise in complexity of the assembly task increases the risk that cognitive incompatibility and thus cognitive overload will occur more frequently. It is shown that such unhealthy conditions can be countered by better information presentation and by the use of individually adaptable informational assistance systems.","lang":"eng"}],"_id":"6925","keyword":["Compatibility","Mental model","Mental workload","Multi-model assembly","Informational assistance systems"],"status":"public","publication":"Zeitschrift für Arbeitswissenschaft","user_id":"49010","year":2021,"department":[{"_id":"DEP7020"},{"_id":"DEP1305"}]},{"status":"public","department":[{"_id":"DEP5023"},{"_id":"DEP5027"}],"user_id":"15514","year":2021,"page":"428-451","abstract":[{"lang":"eng","text":"Assistance is becoming increasingly relevant in carrying out industrial work in the context of cyber-physical production systems (CPPSs) and Industry 4.0. While assistance in a single task via a single interaction modality has been explored previously, crossdevice interaction could improve the quality of assistance, especially given the concurrent and distributed nature of work in CPPSs. In this paper, we present the theoretical foundations and implementation of MiWSICx (Middleware for Work Support in Industrial Contexts), a middleware that showcases how multiple interactive computing devices such as tablets, smartphones, augmented/virtual reality glasses, and wearables could be combined to provide crossdevice industrial assistance. Based on activity theory, MiWSICx models human work as activities combining multiple users, artifacts, and cyber-physical objects. MiWSICx is developed using the actor model for deployment on a variety of hardware alongside a CPPS to provide multiuser, crossdevice, multiactivity assistance."}],"keyword":["human–technology interaction","human–computer interaction","crossdevice interaction","cyber-physical systems","assistance","smart factory","middleware","actor model","information system design","industry 4.0"],"publisher":"Oxford University Press","type":"journal_article","doi":"10.1093/jcde/qwaa088","date_updated":"2023-03-15T13:49:56Z","issue":"1","publication":"Journal of Computational Design and Engineering","_id":"4897","publication_status":"published","volume":8,"language":[{"iso":"eng"}],"date_created":"2021-02-04T15:20:11Z","citation":{"chicago":"Dhiman, Hitesh, and Carsten Röcker. “Middleware for Providing Activity-Driven Assistance in Cyber-Physical Production Systems.” Journal of Computational Design and Engineering 8, no. 1 (2021): 428–51. https://doi.org/10.1093/jcde/qwaa088.","din1505-2-1":"Dhiman, Hitesh ; Röcker, Carsten: Middleware for providing activity-driven assistance in cyber-physical production systems. In: Journal of Computational Design and Engineering Bd. 8. Oxford, Oxford University Press (2021), Nr. 1, S. 428–451","bjps":"Dhiman H and Röcker C (2021) Middleware for Providing Activity-Driven Assistance in Cyber-Physical Production Systems. Journal of Computational Design and Engineering 8, 428–451.","ama":"Dhiman H, Röcker C. Middleware for providing activity-driven assistance in cyber-physical production systems. Journal of Computational Design and Engineering. 2021;8(1):428-451. doi:10.1093/jcde/qwaa088","van":"Dhiman H, Röcker C. Middleware for providing activity-driven assistance in cyber-physical production systems. Journal of Computational Design and Engineering. 2021;8(1):428–51.","ieee":"H. Dhiman and C. Röcker, “Middleware for providing activity-driven assistance in cyber-physical production systems,” Journal of Computational Design and Engineering, vol. 8, no. 1, pp. 428–451, 2021.","chicago-de":"Dhiman, Hitesh und Carsten Röcker. 2021. Middleware for providing activity-driven assistance in cyber-physical production systems. Journal of Computational Design and Engineering 8, Nr. 1: 428–451. doi:10.1093/jcde/qwaa088, .","ufg":"Dhiman, Hitesh/Röcker, Carsten (2021): Middleware for providing activity-driven assistance in cyber-physical production systems, in: Journal of Computational Design and Engineering 8 (1), S. 428–451.","mla":"Dhiman, Hitesh, and Carsten Röcker. “Middleware for Providing Activity-Driven Assistance in Cyber-Physical Production Systems.” Journal of Computational Design and Engineering, vol. 8, no. 1, Oxford University Press, 2021, pp. 428–51, doi:10.1093/jcde/qwaa088.","apa":"Dhiman, H., & Röcker, C. (2021). Middleware for providing activity-driven assistance in cyber-physical production systems. Journal of Computational Design and Engineering, 8(1), 428–451. https://doi.org/10.1093/jcde/qwaa088","short":"H. Dhiman, C. Röcker, Journal of Computational Design and Engineering 8 (2021) 428–451.","havard":"H. Dhiman, C. Röcker, Middleware for providing activity-driven assistance in cyber-physical production systems, Journal of Computational Design and Engineering. 8 (2021) 428–451."},"place":"Oxford","publication_identifier":{"eissn":["2288-4300 "]},"author":[{"last_name":"Dhiman","id":"71767","full_name":"Dhiman, Hitesh","first_name":"Hitesh"},{"first_name":"Carsten","full_name":"Röcker, Carsten","id":"61525","last_name":"Röcker"}],"intvolume":" 8","title":"Middleware for providing activity-driven assistance in cyber-physical production systems"},{"department":[{"_id":"DEP8012"},{"_id":"DEP8025"}],"user_id":"68554","year":2020,"status":"public","keyword":["Entropy","Ice Cube","Sustainability","Sea Level Rise","Information Density","Probability Statements","Material Flow Model","Dissipation"],"_id":"2184","file":[{"relation":"main_file","file_name":"Eiswürfel und Wahrscheinlichkeitsaussagen.pdf","content_type":"application/pdf","creator":"hka-zn8","access_level":"open_access","date_updated":"2020-01-15T10:13:20Z","date_created":"2020-01-15T10:13:20Z","file_size":153981,"file_id":"2185"}],"oa":"1","abstract":[{"text":"Material flows and energy flows can be correlated with sufficient data, e.g. on production energies, annual production quantities and degrees of dissipation with temperature increases in the atmosphere, volumes of molten ice or sea level increases, as well as with probability statements, information densities and management recommendations. All these quantities can be described by the comprehensive term entropy.\r\nIn order to consider the efficiency of material and energy flows, the difficulty to understand the concept of entropy with its different definitions can be summarized simply and easily in a model related to ice cubes.\r\nThe quality of a model containing percentage probability statements, statements on dissipation in material flow models in connection with statements on information density and its description by the ice cube model is still to be determined in practice in suitable material flow models. Such projects should show the types of mathematical correlations between dissipation degrees, entropy increase, increase of molten ice and sea level rise.\r\n","lang":"eng"}],"ddc":["540"],"type":"working_paper","author":[{"full_name":"Sietz, Manfred","id":"21016","last_name":"Sietz","first_name":"Manfred"},{"full_name":"Wrenger, Burkhard","id":"21024","last_name":"Wrenger","first_name":"Burkhard"}],"date_created":"2020-01-15T10:13:24Z","language":[{"iso":"ger"}],"citation":{"chicago":"Sietz, Manfred, and Burkhard Wrenger. Entropie eines Eiswürfels, Wahrscheinlichkeitsaussagen und Meeresspiegelerhöhung, 2020. https://doi.org/10.25644/76E5-PC61.","din1505-2-1":"Sietz, Manfred ; Wrenger, Burkhard: Entropie eines Eiswürfels, Wahrscheinlichkeitsaussagen und Meeresspiegelerhöhung, 2020","bjps":"Sietz M and Wrenger B (2020) Entropie eines Eiswürfels, Wahrscheinlichkeitsaussagen und Meeresspiegelerhöhung. .","ama":"Sietz M, Wrenger B. Entropie eines Eiswürfels, Wahrscheinlichkeitsaussagen und Meeresspiegelerhöhung.; 2020. doi:10.25644/76E5-PC61","van":"Sietz M, Wrenger B. Entropie eines Eiswürfels, Wahrscheinlichkeitsaussagen und Meeresspiegelerhöhung. 2020.","ieee":"M. Sietz and B. Wrenger, Entropie eines Eiswürfels, Wahrscheinlichkeitsaussagen und Meeresspiegelerhöhung. 2020.","chicago-de":"Sietz, Manfred und Burkhard Wrenger. 2020. Entropie eines Eiswürfels, Wahrscheinlichkeitsaussagen und Meeresspiegelerhöhung. doi:10.25644/76E5-PC61, .","ufg":"Sietz, Manfred/Wrenger, Burkhard (2020): Entropie eines Eiswürfels, Wahrscheinlichkeitsaussagen und Meeresspiegelerhöhung.","mla":"Sietz, Manfred, and Burkhard Wrenger. Entropie eines Eiswürfels, Wahrscheinlichkeitsaussagen und Meeresspiegelerhöhung. 2020, doi:10.25644/76E5-PC61.","apa":"Sietz, M., & Wrenger, B. (2020). Entropie eines Eiswürfels, Wahrscheinlichkeitsaussagen und Meeresspiegelerhöhung. https://doi.org/10.25644/76E5-PC61","short":"M. Sietz, B. Wrenger, Entropie eines Eiswürfels, Wahrscheinlichkeitsaussagen und Meeresspiegelerhöhung, 2020.","havard":"M. Sietz, B. Wrenger, Entropie eines Eiswürfels, Wahrscheinlichkeitsaussagen und Meeresspiegelerhöhung, 2020."},"title":"Entropie eines Eiswürfels, Wahrscheinlichkeitsaussagen und Meeresspiegelerhöhung","has_accepted_license":"1","file_date_updated":"2020-01-15T10:13:20Z","date_updated":"2023-03-15T13:49:39Z","doi":"10.25644/76E5-PC61"},{"volume":85,"publication_status":"published","pmid":"1","date_created":"2021-04-08T06:37:30Z","language":[{"iso":"eng"}],"citation":{"chicago-de":"Weishaupt, Imke, Manuel Zimmer, Peter Neubauer und Jan Schneider. 2020. Model based optimization of transflection near infrared spectroscopy as a process analytical tool in a continuous flash pasteurizer. Journal of Food Science 85, Nr. 7: 2020–2031. doi:10.1111/1750-3841.15307, .","ufg":"Weishaupt, Imke u. a.: Model based optimization of transflection near infrared spectroscopy as a process analytical tool in a continuous flash pasteurizer, in: Journal of Food Science 85 (2020), H. 7, S. 2020–2031.","apa":"Weishaupt, I., Zimmer, M., Neubauer, P., & Schneider, J. (2020). Model based optimization of transflection near infrared spectroscopy as a process analytical tool in a continuous flash pasteurizer. Journal of Food Science, 85(7), 2020–2031. https://doi.org/10.1111/1750-3841.15307","mla":"Weishaupt, Imke, et al. “Model Based Optimization of Transflection near Infrared Spectroscopy as a Process Analytical Tool in a Continuous Flash Pasteurizer.” Journal of Food Science, vol. 85, no. 7, 2020, pp. 2020–31, https://doi.org/10.1111/1750-3841.15307.","short":"I. Weishaupt, M. Zimmer, P. Neubauer, J. Schneider, Journal of Food Science 85 (2020) 2020–2031.","havard":"I. Weishaupt, M. Zimmer, P. Neubauer, J. Schneider, Model based optimization of transflection near infrared spectroscopy as a process analytical tool in a continuous flash pasteurizer, Journal of Food Science. 85 (2020) 2020–2031.","chicago":"Weishaupt, Imke, Manuel Zimmer, Peter Neubauer, and Jan Schneider. “Model Based Optimization of Transflection near Infrared Spectroscopy as a Process Analytical Tool in a Continuous Flash Pasteurizer.” Journal of Food Science 85, no. 7 (2020): 2020–31. https://doi.org/10.1111/1750-3841.15307.","din1505-2-1":"Weishaupt, Imke ; Zimmer, Manuel ; Neubauer, Peter ; Schneider, Jan: Model based optimization of transflection near infrared spectroscopy as a process analytical tool in a continuous flash pasteurizer. In: Journal of Food Science Bd. 85 (2020), Nr. 7, S. 2020–2031","bjps":"Weishaupt I et al. (2020) Model Based Optimization of Transflection near Infrared Spectroscopy as a Process Analytical Tool in a Continuous Flash Pasteurizer. Journal of Food Science 85, 2020–2031.","ama":"Weishaupt I, Zimmer M, Neubauer P, Schneider J. Model based optimization of transflection near infrared spectroscopy as a process analytical tool in a continuous flash pasteurizer. Journal of Food Science. 2020;85(7):2020-2031. doi:10.1111/1750-3841.15307","van":"Weishaupt I, Zimmer M, Neubauer P, Schneider J. Model based optimization of transflection near infrared spectroscopy as a process analytical tool in a continuous flash pasteurizer. Journal of Food Science. 2020;85(7):2020–31.","ieee":"I. Weishaupt, M. Zimmer, P. Neubauer, and J. Schneider, “Model based optimization of transflection near infrared spectroscopy as a process analytical tool in a continuous flash pasteurizer,” Journal of Food Science, vol. 85, no. 7, pp. 2020–2031, 2020, doi: 10.1111/1750-3841.15307."},"publication_identifier":{"eissn":["1750-3841"],"isbn":["0022-1147"]},"author":[{"first_name":"Imke","last_name":"Weishaupt","id":"58425","full_name":"Weishaupt, Imke"},{"first_name":"Manuel","id":"71613","last_name":"Zimmer","full_name":"Zimmer, Manuel","orcid":"0000-0002-9974-2543"},{"first_name":"Peter","full_name":"Neubauer, Peter","last_name":"Neubauer"},{"first_name":"Jan","id":"13209","last_name":"Schneider","full_name":"Schneider, Jan","orcid":"0000-0001-6401-8873"}],"intvolume":" 85","isi":"1","title":"Model based optimization of transflection near infrared spectroscopy as a process analytical tool in a continuous flash pasteurizer","publication":"Journal of Food Science","_id":"5424","type":"journal_article","external_id":{"pmid":["32602154"],"isi":["000543977000001"]},"doi":"10.1111/1750-3841.15307","date_updated":"2025-06-26T13:30:26Z","issue":"7","status":"public","department":[{"_id":"DEP1308"},{"_id":"DEP4018"}],"user_id":"83781","year":"2020","page":"2020 - 2031","abstract":[{"text":"Near infrared spectroscopy in combination with a transflection probe was investigated as inline measurement in a continuous flash pasteurizer system with a sugar-water model solution. Robustness and reproducibility of fluctuations of recorded spectra as well as trueness of the chemometric analysis were compared under different process parameter settings. Variable parameters were the flow rate (from laminar flow at 30 L/h to turbulent flow at 90 L/h), temperature (20 to 100 degrees C) and the path length of the transflection probe (2 and 4 mm) while the pressure was kept constant at 2.5 bar. Temperature and path length were identified as the most affecting parameters, in case of homogenous test medium. In case of particle containing systems, the flow rate could have an impact as well. However, the application of a PLS model, which includes a broad temperature range, and the correction of prediction results by applying a polynomial regression function for prediction errors, was able to compensate these effects. Also, a path length of 2 mm leads to a higher accuracy. The applied strategy shows that by the identification of relevant process parameters and settings as well as the establishment of a compensation strategy, near infrared spectroscopy is a powerful process analytical tool for continuous flash pasteurization systems.","lang":"eng"}],"keyword":["flash pasteurization","inline near infrared spectroscopy","multivariate data analysis","process condition influences","sugar-water-solution model beverage"]},{"title":"Digital Transformation of Companies: Experience gained in the Implementation of an IOT Check","date_updated":"2023-03-15T13:49:37Z","type":"conference","author":[{"last_name":"Tackenberg","id":"71470","full_name":"Tackenberg, Sven","first_name":"Sven"},{"id":"14059","last_name":"Jungkind","full_name":"Jungkind, Wilfried","first_name":"Wilfried"},{"last_name":"Feldmann","full_name":"Feldmann, C.","first_name":"C."},{"first_name":"W.","full_name":"Appelfeller, W.","last_name":"Appelfeller"}],"publication_status":"published","editor":[{"full_name":"Padoano, Elio","last_name":"Padoano","first_name":"Elio"},{"first_name":"Franz-Josef","full_name":"Villmer, Franz-Josef","last_name":"Villmer"}],"language":[{"iso":"eng"}],"date_created":"2019-02-18T11:34:36Z","citation":{"apa":"Tackenberg, S., Jungkind, W., Feldmann, C., & Appelfeller, W. (2019). Digital Transformation of Companies: Experience gained in the Implementation of an IOT Check. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 281–290). Lemgo.","mla":"Tackenberg, Sven, et al. “Digital Transformation of Companies: Experience Gained in the Implementation of an IOT Check.” Production Engineering and Management, edited by Elio Padoano et al., 2019, pp. 281–90.","din1505-2-1":"Tackenberg, Sven ; Jungkind, Wilfried ; Feldmann, C. ; Appelfeller, W.: Digital Transformation of Companies: Experience gained in the Implementation of an IOT Check. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2019, S. 281–290","bjps":"Tackenberg S et al. (2019) Digital Transformation of Companies: Experience Gained in the Implementation of an IOT Check. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 281–290.","short":"S. Tackenberg, W. Jungkind, C. Feldmann, W. Appelfeller, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2019, pp. 281–290.","chicago-de":"Tackenberg, Sven, Wilfried Jungkind, C. Feldmann und W. Appelfeller. 2019. Digital Transformation of Companies: Experience gained in the Implementation of an IOT Check. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 281–290. Lemgo.","chicago":"Tackenberg, Sven, Wilfried Jungkind, C. Feldmann, and W. Appelfeller. “Digital Transformation of Companies: Experience Gained in the Implementation of an IOT Check.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 281–90. Lemgo, 2019.","ufg":"Tackenberg, Sven et. al. (2019): Digital Transformation of Companies: Experience gained in the Implementation of an IOT Check, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 281–290.","havard":"S. Tackenberg, W. Jungkind, C. Feldmann, W. Appelfeller, Digital Transformation of Companies: Experience gained in the Implementation of an IOT Check, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2019: pp. 281–290.","ieee":"S. Tackenberg, W. Jungkind, C. Feldmann, and W. Appelfeller, “Digital Transformation of Companies: Experience gained in the Implementation of an IOT Check,” in Production Engineering and Management, Trieste, Italy, 2019, pp. 281–290.","ama":"Tackenberg S, Jungkind W, Feldmann C, Appelfeller W. Digital Transformation of Companies: Experience gained in the Implementation of an IOT Check. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2019:281-290.","van":"Tackenberg S, Jungkind W, Feldmann C, Appelfeller W. Digital Transformation of Companies: Experience gained in the Implementation of an IOT Check. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2019. p. 281–90."},"place":"Lemgo","keyword":["Digital transformation","Maturity model","Check"],"_id":"1911","conference":{"location":"Trieste, Italy","name":"Proceedings 9th International Conference","end_date":"2019-10-04","start_date":"2019-10-03"},"page":"281-290","abstract":[{"lang":"eng","text":"Reading about small and medium-sized manufacturing companies in newspapers and magazines, one might get the impression that integrating and exploiting new digital technologies is one of the most urgent challenges for managers today. Although many different industry 4.0 and Internet of Things (IoT) tests have been published, a framework to structure the content and the process of digital transformation is missing. Therefore, comprehensive research of available literature has been implemented; the results show that the framework from Appelfeller and Feldmann is the most suitable for application in companies. Due to the fact that the authors present no acquired experience in the application of the framework in practice, an evaluation study was set up in companies. The results of a case study are presented and an overview is given how to implement this specific check in a company."}],"corporate_editor":["Department of Production Engineering and Management","Technische Hochschule Ostwestfalen-Lippe"],"department":[{"_id":"DEP1306"},{"_id":"DEP7020"},{"_id":"DEP1305"}],"user_id":"74004","year":2019,"publication":"Production Engineering and Management","status":"public"},{"publisher":"IEEE","type":"conference_editor_article","doi":"10.1109/indin41052.2019.8972251","date_updated":"2025-06-26T13:38:06Z","status":"public","corporate_editor":["Aalto University, Finland","Tampere University, Finland","Finnish Society of Automation, Finland"],"department":[{"_id":"DEP5023"}],"user_id":"83781","year":"2019","page":"1285-1290","conference":{"name":"17th IEEE International Conference on Industrial Informatics (INDIN)","end_date":"2019-07-25","start_date":"2019-07-22","location":"Helsinki, Finland "},"abstract":[{"text":"The increasing amount of alarms and information for an operator in a modern plant becomes a significant safety risk. Although the notifications are a valuable support, they also lead to the curse of overloading with information for the operator. Due to the huge amount of alarms it is almost impossible to separate the crucial information from the insignificant ones. Therefore, new procedures are required to reduce these alarm floods and support the operator to minimize the safety risk. One approach is based on learning a causal model that represents the relationships between the alarms. This allows alarm sequences that are causally implied to be reduced to the root cause alarm. Fundamental element of this approach is the causal model. Therefore in this work, different probabilistic graphical models are considered and evaluated on the basis of appropriate criteria. A real use case of a bottle filling module serves as a benchmark for how well they are suitable as a causal model for the application in alarm flood reduction.","lang":"eng"}],"keyword":["probabilistic graphical model","causal model","alarm flood reduction","Bayesian network","Markov chain","restricted boltzmann machine","automata"],"publication_status":"published","language":[{"iso":"eng"}],"date_created":"2025-04-16T06:29:04Z","citation":{"short":"P. Wunderlich, N. Hranisavljevic, Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction, IEEE, [Piscataway, NJ], 2019.","apa":"Wunderlich, P., & Hranisavljevic, N. (2019). Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction. In Aalto University, Finland, Tampere University, Finland, & Finnish Society of Automation, Finland (Eds.), 2019 IEEE 17th International Conference on Industrial Informatics (INDIN) (pp. 1285–1290). IEEE. https://doi.org/10.1109/indin41052.2019.8972251","mla":"Wunderlich, Paul, and Nemanja Hranisavljevic. “Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction.” 2019 IEEE 17th International Conference on Industrial Informatics (INDIN), edited by Aalto University, Finland et al., IEEE, 2019, pp. 1285–90, https://doi.org/10.1109/indin41052.2019.8972251.","ufg":"Wunderlich, Paul/Hranisavljevic, Nemanja: Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction, hg. von Aalto University, Finland/Tampere University, Finland, Finnish Society of Automation, Finland, [Piscataway, NJ] 2019.","chicago-de":"Wunderlich, Paul und Nemanja Hranisavljevic. 2019. Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction. Hg. von Aalto University, Finland, Tampere University, Finland, und Finnish Society of Automation, Finland. 2019 IEEE 17th International Conference on Industrial Informatics (INDIN). [Piscataway, NJ]: IEEE. doi:10.1109/indin41052.2019.8972251, .","havard":"P. Wunderlich, N. Hranisavljevic, Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction, IEEE, [Piscataway, NJ], 2019.","bjps":"Wunderlich P and Hranisavljevic N (2019) Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction, Aalto University, Finland, Tampere University, Finland, and Finnish Society of Automation, Finland (eds). [Piscataway, NJ]: IEEE.","din1505-2-1":"Wunderlich, Paul ; Hranisavljevic, Nemanja ; Aalto University, Finland ; Tampere University, Finland ; Finnish Society of Automation, Finland (Hrsg.): Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction. [Piscataway, NJ] : IEEE, 2019","chicago":"Wunderlich, Paul, and Nemanja Hranisavljevic. Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction. Edited by Aalto University, Finland, Tampere University, Finland, and Finnish Society of Automation, Finland. 2019 IEEE 17th International Conference on Industrial Informatics (INDIN). [Piscataway, NJ]: IEEE, 2019. https://doi.org/10.1109/indin41052.2019.8972251.","ieee":"P. Wunderlich and N. Hranisavljevic, Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction. [Piscataway, NJ]: IEEE, 2019, pp. 1285–1290. doi: 10.1109/indin41052.2019.8972251.","van":"Wunderlich P, Hranisavljevic N. Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction. Aalto University, Finland, Tampere University, Finland, Finnish Society of Automation, Finland, editors. 2019 IEEE 17th International Conference on Industrial Informatics (INDIN). [Piscataway, NJ]: IEEE; 2019.","ama":"Wunderlich P, Hranisavljevic N. Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction. (Aalto University, Finland, Tampere University, Finland, Finnish Society of Automation, Finland, eds.). IEEE; 2019:1285-1290. doi:10.1109/indin41052.2019.8972251"},"place":"[Piscataway, NJ]","publication_identifier":{"isbn":["978-1-7281-2928-0"],"eisbn":["978-1-7281-2927-3"]},"author":[{"full_name":"Wunderlich, Paul","last_name":"Wunderlich","id":"52317","first_name":"Paul"},{"first_name":"Nemanja","full_name":"Hranisavljevic, Nemanja","last_name":"Hranisavljevic","id":"62376"}],"title":"Comparison of Different Probabilistic Graphical Models as Causal Models in Alarm Flood Reduction","publication":"2019 IEEE 17th International Conference on Industrial Informatics (INDIN)","_id":"12803"},{"title":"Comparison and transformation between CDISC ODM and EN13606 EHR standards in connecting EHR data with clinical trial research data","intvolume":" 4","author":[{"full_name":"Tapuria, Archana","last_name":"Tapuria","first_name":"Archana"},{"full_name":"Bruland, Philipp","last_name":"Bruland","id":"75847","first_name":"Philipp","orcid":"0000-0001-6939-7630"},{"full_name":"Delaney, Brendan","last_name":"Delaney","first_name":"Brendan"},{"last_name":"Kalra","full_name":"Kalra, Dipak","first_name":"Dipak"},{"first_name":"Vasa","last_name":"Curcin","full_name":"Curcin, Vasa"}],"publication_identifier":{"eissn":["2055-2076"]},"citation":{"chicago-de":"Tapuria, Archana, Philipp Bruland, Brendan Delaney, Dipak Kalra und Vasa Curcin. 2018. Comparison and transformation between CDISC ODM and EN13606 EHR standards in connecting EHR data with clinical trial research data. Digital health 4. doi:10.1177/2055207618777676, .","ufg":"Tapuria, Archana u. a.: Comparison and transformation between CDISC ODM and EN13606 EHR standards in connecting EHR data with clinical trial research data, in: Digital health 4 (2018).","apa":"Tapuria, A., Bruland, P., Delaney, B., Kalra, D., & Curcin, V. (2018). Comparison and transformation between CDISC ODM and EN13606 EHR standards in connecting EHR data with clinical trial research data. Digital Health, 4, Article 205520761877767. https://doi.org/10.1177/2055207618777676","mla":"Tapuria, Archana, et al. “Comparison and Transformation between CDISC ODM and EN13606 EHR Standards in Connecting EHR Data with Clinical Trial Research Data.” Digital Health, vol. 4, 205520761877767, 2018, https://doi.org/10.1177/2055207618777676.","short":"A. Tapuria, P. Bruland, B. Delaney, D. Kalra, V. Curcin, Digital Health 4 (2018).","havard":"A. Tapuria, P. Bruland, B. Delaney, D. Kalra, V. Curcin, Comparison and transformation between CDISC ODM and EN13606 EHR standards in connecting EHR data with clinical trial research data, Digital Health. 4 (2018).","chicago":"Tapuria, Archana, Philipp Bruland, Brendan Delaney, Dipak Kalra, and Vasa Curcin. “Comparison and Transformation between CDISC ODM and EN13606 EHR Standards in Connecting EHR Data with Clinical Trial Research Data.” Digital Health 4 (2018). https://doi.org/10.1177/2055207618777676.","din1505-2-1":"Tapuria, Archana ; Bruland, Philipp ; Delaney, Brendan ; Kalra, Dipak ; Curcin, Vasa: Comparison and transformation between CDISC ODM and EN13606 EHR standards in connecting EHR data with clinical trial research data. In: Digital health Bd. 4. Thousand Oaks, Calif. [u.a.] , SAGE Publications (2018)","bjps":"Tapuria A et al. (2018) Comparison and Transformation between CDISC ODM and EN13606 EHR Standards in Connecting EHR Data with Clinical Trial Research Data. Digital health 4.","ama":"Tapuria A, Bruland P, Delaney B, Kalra D, Curcin V. Comparison and transformation between CDISC ODM and EN13606 EHR standards in connecting EHR data with clinical trial research data. Digital health. 2018;4. doi:10.1177/2055207618777676","van":"Tapuria A, Bruland P, Delaney B, Kalra D, Curcin V. Comparison and transformation between CDISC ODM and EN13606 EHR standards in connecting EHR data with clinical trial research data. Digital health. 2018;4.","ieee":"A. Tapuria, P. Bruland, B. Delaney, D. Kalra, and V. Curcin, “Comparison and transformation between CDISC ODM and EN13606 EHR standards in connecting EHR data with clinical trial research data,” Digital health, vol. 4, Art. no. 205520761877767, 2018, doi: 10.1177/2055207618777676."},"place":"Thousand Oaks, Calif. [u.a.] ","pmid":"1","volume":4,"publication_status":"published","date_created":"2024-07-18T13:34:20Z","language":[{"iso":"eng"}],"_id":"11746","article_number":"205520761877767","publication":"Digital health","doi":"10.1177/2055207618777676","date_updated":"2024-07-18T13:36:34Z","external_id":{"pmid":["29942639"]},"type":"scientific_journal_article","publisher":"SAGE Publications","extern":"1","keyword":["EN13606","Operational data model","clinical archetypes","electronic health records","interoperability."],"abstract":[{"lang":"eng","text":"Objectives: Integrating Electronic Health Record (EHR) systems into the field of clinical trials still contains several challenges and obstacles. Heterogeneous standards and specifications are used to represent healthcare and clinical trial information. Therefore, this work investigates the mapping and data interoperability between healthcare and research standards: EN13606 used for the EHRs and the Clinical Data Interchange Standards Consortium Operational Data Model (CDISC ODM) used for clinical research.\r\n\r\nMethods: Based on the specifications of CDISC ODM 1.3.2 and EN13606, a mapping between the structure and components of both standards has been performed. Archetype Definition Language (ADL) forms built with the EN13606 editor were transformed to ODM XML and reviewed. As a proof of concept, clinical sample data has been transformed into ODM and imported into an electronic data capture system. Reverse transformation from ODM to ADL has also been performed and finally reviewed concerning map-ability.\r\n\r\nResults: The mapping between EN13606 and CDISC ODM shows the similarities and differences between the components and overall record structure of the two standards. An EN13606 archetype corresponds with a group of items within CDISC ODM. Transformations of element names, descriptions, different languages, datatypes, cardinality, optionality, units, value range and terminology codes are possible from EN13606 to CDISC ODM and vice versa.\r\n\r\nConclusion: It is feasible to map data elements between EN13606 and CDISC ODM and transformation of forms between ADL and ODM XML format is possible with only minor limitations. EN13606 can accommodate clinical information in a more structured manner with more constraints, whereas CDISC ODM is more suitable and specific for clinical trials and studies. It is feasible to transform EHR data in the EN13606 form to ODM to transfer it into research database. The attempt to use EN13606 to build a study protocol (that was already built with CDISC ODM) also suggests the possibility of using EN13606 standard in place of CDISC ODM if needed to avoid transformations."}],"year":"2018","user_id":"83781","department":[{"_id":"DEP5024"}],"status":"public"},{"abstract":[{"lang":"eng","text":"The modelling community has identified challenges for the integration and assessment of lake models due to the diversity of modelling approaches and lakes. In this study, we develop and assess a one-dimensional lake model and apply it to 32 lakes from a global observatory network. The data set included lakes over broad ranges in latitude, climatic zones, size, residence time, mixing regime and trophic level. Model performance was evaluated using several error assessment metrics, and a sensitivity analysis was conducted for nine parameters that governed the surface heat exchange and mixing efficiency. There was low correlation between input data uncertainty and model performance and predictions of temperature were less sensitive to model parameters than prediction of thermocline depth and Schmidt stability. The study provides guidance to where the general model approach and associated assumptions work, and cases where adjustments to model parameterisations and/or structure are required."}],"page":"274-291","extern":"1","keyword":["Lake model","Stratification","GLM","Model assessment","Global observatory data","Network science"],"status":"public","user_id":"83781","year":"2018","department":[{"_id":"DEP8022"}],"doi":"10.1016/j.envsoft.2017.11.016","date_updated":"2024-12-09T10:13:47Z","quality_controlled":"1","issue":"4","publisher":"Elsevier Science","type":"scientific_journal_article","_id":"12239","publication":"Environmental modelling & software with environment data news ","main_file_link":[{"url":"https://doi.org/10.1016/j.envsoft.2017.11.016"}],"title":"A multi-lake comparative analysis of the General Lake Model (GLM): Stress-testing across a global observatory network","citation":{"chicago":"Bruce, Louise C., Marieke A. Frassl, George B. Arhonditsis, Gideon Gal, David P. Hamilton, Paul C. Hanson, Amy L. Hetherington, et al. “A Multi-Lake Comparative Analysis of the General Lake Model (GLM): Stress-Testing across a Global Observatory Network.” Environmental Modelling & Software with Environment Data News 102, no. 4 (2018): 274–91. https://doi.org/10.1016/j.envsoft.2017.11.016.","bjps":"Bruce LC et al. (2018) A Multi-Lake Comparative Analysis of the General Lake Model (GLM): Stress-Testing across a Global Observatory Network. Environmental modelling & software with environment data news 102, 274–291.","din1505-2-1":"Bruce, Louise C. ; Frassl, Marieke A. ; Arhonditsis, George B. ; Gal, Gideon ; Hamilton, David P. ; Hanson, Paul C. ; Hetherington, Amy L. ; Melack, John M. ; u. a.: A multi-lake comparative analysis of the General Lake Model (GLM): Stress-testing across a global observatory network. In: Environmental modelling & software with environment data news Bd. 102. Oxford, Elsevier Science (2018), Nr. 4, S. 274–291","ama":"Bruce LC, Frassl MA, Arhonditsis GB, et al. A multi-lake comparative analysis of the General Lake Model (GLM): Stress-testing across a global observatory network. Environmental modelling & software with environment data news . 2018;102(4):274-291. doi:10.1016/j.envsoft.2017.11.016","van":"Bruce LC, Frassl MA, Arhonditsis GB, Gal G, Hamilton DP, Hanson PC, et al. A multi-lake comparative analysis of the General Lake Model (GLM): Stress-testing across a global observatory network. Environmental modelling & software with environment data news . 2018;102(4):274–91.","ieee":"L. C. Bruce et al., “A multi-lake comparative analysis of the General Lake Model (GLM): Stress-testing across a global observatory network,” Environmental modelling & software with environment data news , vol. 102, no. 4, pp. 274–291, 2018, doi: 10.1016/j.envsoft.2017.11.016.","ufg":"Bruce, Louise C. u. a.: A multi-lake comparative analysis of the General Lake Model (GLM): Stress-testing across a global observatory network, in: Environmental modelling & software with environment data news 102 (2018), H. 4, S. 274–291.","chicago-de":"Bruce, Louise C., Marieke A. Frassl, George B. Arhonditsis, Gideon Gal, David P. Hamilton, Paul C. Hanson, Amy L. Hetherington, u. a. 2018. A multi-lake comparative analysis of the General Lake Model (GLM): Stress-testing across a global observatory network. Environmental modelling & software with environment data news 102, Nr. 4: 274–291. doi:10.1016/j.envsoft.2017.11.016, .","short":"L.C. Bruce, M.A. Frassl, G.B. Arhonditsis, G. Gal, D.P. Hamilton, P.C. Hanson, A.L. Hetherington, J.M. Melack, J.S. Read, K. Rinke, A. Rigosi, D. Trolle, L. Winslow, R. Adrian, A.I. Ayala, S.A. Bocaniov, B. Boehrer, C. Boon, J.D. Brookes, T. Bueche, B.D. Busch, D. Copetti, A. Cortés, E. de Eyto, J.A. Elliott, N. Gallina, Y. Gilboa, N. Guyennon, L. Huang, O. Kerimoglu, J.D. Lenters, S. MacIntyre, V. Makler-Pick, C.G. McBride, S. Moreira, D. Özkundakci, M. Pilotti, F.J. Rueda, J.A. Rusak, N.R. Samal, M. Schmid, T. Shatwell, C. Snorthheim, F. Soulignac, G. Valerio, L. van der Linden, M. Vetter, B. Vinçon-Leite, J. Wang, M. Weber, C. Wickramaratne, R.I. Woolway, H. Yao, M.R. Hipsey, Environmental Modelling & Software with Environment Data News 102 (2018) 274–291.","apa":"Bruce, L. C., Frassl, M. A., Arhonditsis, G. B., Gal, G., Hamilton, D. P., Hanson, P. C., Hetherington, A. L., Melack, J. M., Read, J. S., Rinke, K., Rigosi, A., Trolle, D., Winslow, L., Adrian, R., Ayala, A. I., Bocaniov, S. A., Boehrer, B., Boon, C., Brookes, J. D., … Hipsey, M. R. (2018). A multi-lake comparative analysis of the General Lake Model (GLM): Stress-testing across a global observatory network. Environmental Modelling & Software with Environment Data News , 102(4), 274–291. https://doi.org/10.1016/j.envsoft.2017.11.016","mla":"Bruce, Louise C., et al. “A Multi-Lake Comparative Analysis of the General Lake Model (GLM): Stress-Testing across a Global Observatory Network.” Environmental Modelling & Software with Environment Data News , vol. 102, no. 4, 2018, pp. 274–91, https://doi.org/10.1016/j.envsoft.2017.11.016.","havard":"L.C. Bruce, M.A. Frassl, G.B. Arhonditsis, G. Gal, D.P. Hamilton, P.C. Hanson, A.L. Hetherington, J.M. Melack, J.S. Read, K. Rinke, A. Rigosi, D. Trolle, L. Winslow, R. Adrian, A.I. Ayala, S.A. Bocaniov, B. Boehrer, C. Boon, J.D. Brookes, T. Bueche, B.D. Busch, D. Copetti, A. Cortés, E. de Eyto, J.A. Elliott, N. Gallina, Y. Gilboa, N. Guyennon, L. Huang, O. Kerimoglu, J.D. Lenters, S. MacIntyre, V. Makler-Pick, C.G. McBride, S. Moreira, D. Özkundakci, M. Pilotti, F.J. Rueda, J.A. Rusak, N.R. Samal, M. Schmid, T. Shatwell, C. Snorthheim, F. Soulignac, G. Valerio, L. van der Linden, M. Vetter, B. Vinçon-Leite, J. Wang, M. Weber, C. Wickramaratne, R.I. Woolway, H. Yao, M.R. Hipsey, A multi-lake comparative analysis of the General Lake Model (GLM): Stress-testing across a global observatory network, Environmental Modelling & Software with Environment Data News . 102 (2018) 274–291."},"place":"Oxford","publication_status":"published","volume":102,"language":[{"iso":"eng"}],"date_created":"2024-12-08T20:32:07Z","intvolume":" 102","author":[{"last_name":"Bruce","full_name":"Bruce, Louise C.","first_name":"Louise C."},{"full_name":"Frassl, Marieke A.","last_name":"Frassl","first_name":"Marieke A."},{"first_name":"George B.","last_name":"Arhonditsis","full_name":"Arhonditsis, George B."},{"full_name":"Gal, Gideon","last_name":"Gal","first_name":"Gideon"},{"full_name":"Hamilton, David P.","last_name":"Hamilton","first_name":"David P."},{"last_name":"Hanson","full_name":"Hanson, Paul C.","first_name":"Paul C."},{"last_name":"Hetherington","full_name":"Hetherington, Amy L.","first_name":"Amy L."},{"first_name":"John M.","last_name":"Melack","full_name":"Melack, John M."},{"first_name":"Jordan S.","full_name":"Read, Jordan S.","last_name":"Read"},{"first_name":"Karsten","last_name":"Rinke","full_name":"Rinke, Karsten"},{"first_name":"Anna","last_name":"Rigosi","full_name":"Rigosi, Anna"},{"first_name":"Dennis","full_name":"Trolle, Dennis","last_name":"Trolle"},{"full_name":"Winslow, Luke","last_name":"Winslow","first_name":"Luke"},{"last_name":"Adrian","full_name":"Adrian, Rita","first_name":"Rita"},{"last_name":"Ayala","full_name":"Ayala, Ana I.","first_name":"Ana I."},{"full_name":"Bocaniov, Serghei A.","last_name":"Bocaniov","first_name":"Serghei A."},{"full_name":"Boehrer, Bertram","last_name":"Boehrer","first_name":"Bertram"},{"first_name":"Casper","full_name":"Boon, Casper","last_name":"Boon"},{"first_name":"Justin D.","last_name":"Brookes","full_name":"Brookes, Justin D."},{"last_name":"Bueche","full_name":"Bueche, Thomas","first_name":"Thomas"},{"first_name":"Brendan D.","full_name":"Busch, Brendan D.","last_name":"Busch"},{"full_name":"Copetti, Diego","last_name":"Copetti","first_name":"Diego"},{"last_name":"Cortés","full_name":"Cortés, Alicia","first_name":"Alicia"},{"last_name":"de Eyto","full_name":"de Eyto, Elvira","first_name":"Elvira"},{"first_name":"J. Alex","last_name":"Elliott","full_name":"Elliott, J. Alex"},{"full_name":"Gallina, Nicole","last_name":"Gallina","first_name":"Nicole"},{"first_name":"Yael","full_name":"Gilboa, Yael","last_name":"Gilboa"},{"last_name":"Guyennon","full_name":"Guyennon, Nicolas","first_name":"Nicolas"},{"last_name":"Huang","full_name":"Huang, Lei","first_name":"Lei"},{"full_name":"Kerimoglu, Onur","last_name":"Kerimoglu","first_name":"Onur"},{"full_name":"Lenters, John D.","last_name":"Lenters","first_name":"John D."},{"full_name":"MacIntyre, Sally","last_name":"MacIntyre","first_name":"Sally"},{"first_name":"Vardit","full_name":"Makler-Pick, Vardit","last_name":"Makler-Pick"},{"first_name":"Chris G.","full_name":"McBride, Chris G.","last_name":"McBride"},{"full_name":"Moreira, Santiago","last_name":"Moreira","first_name":"Santiago"},{"full_name":"Özkundakci, Deniz","last_name":"Özkundakci","first_name":"Deniz"},{"full_name":"Pilotti, Marco","last_name":"Pilotti","first_name":"Marco"},{"last_name":"Rueda","full_name":"Rueda, Francisco J.","first_name":"Francisco J."},{"first_name":"James A.","full_name":"Rusak, James A.","last_name":"Rusak"},{"last_name":"Samal","full_name":"Samal, Nihar R.","first_name":"Nihar R."},{"full_name":"Schmid, Martin","last_name":"Schmid","first_name":"Martin"},{"orcid":"0000-0002-4520-7916","first_name":"Tom","id":"86424","last_name":"Shatwell","full_name":"Shatwell, Tom"},{"first_name":"Craig","last_name":"Snorthheim","full_name":"Snorthheim, Craig"},{"full_name":"Soulignac, Frédéric","last_name":"Soulignac","first_name":"Frédéric"},{"last_name":"Valerio","full_name":"Valerio, Giulia","first_name":"Giulia"},{"last_name":"van der Linden","full_name":"van der Linden, Leon","first_name":"Leon"},{"first_name":"Mark","last_name":"Vetter","full_name":"Vetter, Mark"},{"first_name":"Brigitte","full_name":"Vinçon-Leite, Brigitte","last_name":"Vinçon-Leite"},{"full_name":"Wang, Junbo","last_name":"Wang","first_name":"Junbo"},{"first_name":"Michael","last_name":"Weber","full_name":"Weber, Michael"},{"last_name":"Wickramaratne","full_name":"Wickramaratne, Chaturangi","first_name":"Chaturangi"},{"last_name":"Woolway","full_name":"Woolway, R. Iestyn","first_name":"R. Iestyn"},{"first_name":"Huaxia","last_name":"Yao","full_name":"Yao, Huaxia"},{"last_name":"Hipsey","full_name":"Hipsey, Matthew R.","first_name":"Matthew R."}],"publication_identifier":{"issn":["1364-8152"],"eissn":["1873-6726"]}},{"publication":"23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)","status":"public","department":[{"_id":"DEP5023"}],"user_id":"15514","year":2018,"conference":{"name":" IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA) 2018","start_date":"2018-09-04","end_date":"2018-09-07","location":" Turin, Italy "},"abstract":[{"lang":"eng","text":"We present a method for the fast and robust linear classification of badly conditioned data. In our considerations, badly conditioned data are such data which are numerically difficult to handle. Due to, e.g. a large number of features or a large number of objects representing classes as well as noise, outliers or incompleteness, the common software computation of the discriminating linear combination of features between classes fails or is extremely time consuming. The theoretical foundations of our approach are based on the single feature ranking, which allows fast calculation of the approximative initial classification boundary. For the increasing of classification accuracy of this boundary, the refinement is performed in the lower dimensional space. Our approach is tested on several datasets from UCI Reposi-tiory. Experimental results indicate high classification accuracy of the approach. For the modern real industrial applications such a method is especially suitable in the Cyber-Physical-System environments and provides a part of the workflow for the automated classifier design"}],"keyword":["Task analysis","Software","Linear discriminant analysis","Dimensionality reduction","Mathematical model","Covariance matrices","Measurement"],"_id":"2005","oa":"1","language":[{"iso":"eng"}],"date_created":"2019-11-25T08:35:44Z","place":"Torino, Italy","citation":{"din1505-2-1":"Dörksen, Helene ; Lohweg, Volker: Linear Classification of Badly Conditioned Data. . In: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy, 2018","apa":"Dörksen, H., & Lohweg, V. (2018). Linear Classification of Badly Conditioned Data. . In 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy. https://doi.org/10.1109/ETFA.2018.8502485","mla":"Dörksen, Helene, and Volker Lohweg. “Linear Classification of Badly Conditioned Data. .” 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2018, doi:10.1109/ETFA.2018.8502485.","bjps":"Dörksen H and Lohweg V (2018) Linear Classification of Badly Conditioned Data. . 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy.","short":"H. Dörksen, V. Lohweg, in: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Torino, Italy, 2018.","chicago":"Dörksen, Helene, and Volker Lohweg. “Linear Classification of Badly Conditioned Data. .” In 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy, 2018. https://doi.org/10.1109/ETFA.2018.8502485.","chicago-de":"Dörksen, Helene und Volker Lohweg. 2018. Linear Classification of Badly Conditioned Data. . In: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy. doi:10.1109/ETFA.2018.8502485, .","ufg":"Dörksen, Helene/Lohweg, Volker (2018): Linear Classification of Badly Conditioned Data. , in: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Torino, Italy.","ieee":"H. Dörksen and V. Lohweg, “Linear Classification of Badly Conditioned Data. ,” in 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Turin, Italy , 2018.","havard":"H. Dörksen, V. Lohweg, Linear Classification of Badly Conditioned Data. , in: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Torino, Italy, 2018.","van":"Dörksen H, Lohweg V. Linear Classification of Badly Conditioned Data. . In: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy; 2018.","ama":"Dörksen H, Lohweg V. Linear Classification of Badly Conditioned Data. . In: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy; 2018. doi:10.1109/ETFA.2018.8502485"},"author":[{"first_name":"Helene","last_name":"Dörksen","id":"46416","full_name":"Dörksen, Helene"},{"full_name":"Lohweg, Volker","id":"1804","last_name":"Lohweg","first_name":"Volker","orcid":"0000-0002-3325-7887"}],"type":"conference","title":"Linear Classification of Badly Conditioned Data. ","main_file_link":[{"open_access":"1","url":"https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8502485"}],"date_updated":"2023-03-15T13:49:38Z","doi":"10.1109/ETFA.2018.8502485"},{"related_material":{"link":[{"relation":"contains","url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf"}]},"issue":"1","date_updated":"2023-03-15T13:50:00Z","type":"conference","editor":[{"first_name":"Franz-Josef","last_name":"Villmer","full_name":"Villmer, Franz-Josef"},{"full_name":"Padoano, Elio","last_name":"Padoano","first_name":"Elio"}],"keyword":["PLM","ALM","Software engineering","V-model","Scrum"],"abstract":[{"lang":"eng","text":"Companies that use product lifecycle management (PLM) systems need to configure them individually. Such configuration is considered as a software development process. This article demonstrates how the software development process for PLM configuration can be improved by applying applicationlifecycle management (ALM) concepts. This paper explains how such a conceptdesigncan be created and implemented. The concept was evaluated in a real industrial case study. By this, it provides valuable insights useablefor any company, facing similar challenges as depicted in this paper."}],"page":"31-41","conference":{"location":"Lemgo","end_date":"2018-10-05","start_date":"2018-10-04","name":"Proceedings 8th International Conference"},"year":2018,"user_id":"62088","corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"department":[{"_id":"DEP1306"},{"_id":"DEP7022"}],"status":"public","main_file_link":[{"open_access":"1","url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf"}],"title":"Design of an ALM-Based Process for Configuring PLM Systems","author":[{"first_name":"Martin","id":"68780","last_name":"Heister","full_name":"Heister, Martin"},{"first_name":"Andreas","full_name":"Deuter, Andreas","last_name":"Deuter","id":"62088"},{"first_name":"B.","full_name":"Schrader, B.","last_name":"Schrader"}],"publication_identifier":{"isbn":["978-3-946856-03-0"]},"citation":{"havard":"M. Heister, A. Deuter, B. Schrader, Design of an ALM-Based Process for Configuring PLM Systems, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp. 31–41.","ufg":"Heister, Martin et. al. (2018): Design of an ALM-Based Process for Configuring PLM Systems, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 31–41.","chicago-de":"Heister, Martin, Andreas Deuter und B. Schrader. 2018. Design of an ALM-Based Process for Configuring PLM Systems. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 31–41. Lemgo.","short":"M. Heister, A. Deuter, B. Schrader, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018, pp. 31–41.","apa":"Heister, M., Deuter, A., & Schrader, B. (2018). Design of an ALM-Based Process for Configuring PLM Systems. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 31–41). Lemgo.","mla":"Heister, Martin, et al. “Design of an ALM-Based Process for Configuring PLM Systems.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 31–41.","ama":"Heister M, Deuter A, Schrader B. Design of an ALM-Based Process for Configuring PLM Systems. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2018:31-41.","van":"Heister M, Deuter A, Schrader B. Design of an ALM-Based Process for Configuring PLM Systems. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2018. p. 31–41.","ieee":"M. Heister, A. Deuter, and B. Schrader, “Design of an ALM-Based Process for Configuring PLM Systems,” in Production Engineering and Management, Lemgo, 2018, no. 1, pp. 31–41.","chicago":"Heister, Martin, Andreas Deuter, and B. Schrader. “Design of an ALM-Based Process for Configuring PLM Systems.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 31–41. Lemgo, 2018.","bjps":"Heister M, Deuter A and Schrader B (2018) Design of an ALM-Based Process for Configuring PLM Systems. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 31–41.","din1505-2-1":"Heister, Martin ; Deuter, Andreas ; Schrader, B.: Design of an ALM-Based Process for Configuring PLM Systems. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2018, S. 31–41"},"place":"Lemgo","publication_status":"published","date_created":"2019-02-13T14:03:03Z","language":[{"iso":"eng"}],"oa":"1","_id":"551","publication":"Production Engineering and Management"},{"date_updated":"2025-06-26T13:23:32Z","doi":"10.1145/3215611.3215613","type":"conference_editor_article","editor":[{"last_name":"Atzenbeck","full_name":"Atzenbeck, Claus","first_name":"Claus"}],"publisher":"ACM","keyword":["Multimodal interaction","hypermedia structures","hypertext infrastructure","structure model","interaction model","MVC","digital boardroom"],"conference":{"location":"Baltimore, MD","start_date":"2018-07-09","end_date":"2018-07-09","name":"1st Workshop on Human Factors in Hypertext (HUMAN)"},"page":"17-21","abstract":[{"text":"Multimodal interfaces provide users with a number of different ways of interacting with a system. This paper proposes the integration of an explicit interaction model as an extension of the well-known MVC architectural pattern. It builds upon previous extensions regarding explicit structure, user interface (UI), and environmental models. In addition, this paper proposes an explicit UI layer in a service-oriented hypermedia infrastructure to address requirements from multimodal interfaces.","lang":"eng"}],"corporate_editor":["Association for Computing Machinery-Digital Library"],"department":[{"_id":"DEP8000"},{"_id":"DEP8008"}],"user_id":"83781","year":"2018","status":"public","title":"Multimodal Interaction with Hypermedia Structures","publication_identifier":{"isbn":["978-1-4503-5658-9"]},"author":[{"full_name":"Rubart, Jessica","last_name":"Rubart","id":"45672","first_name":"Jessica"}],"publication_status":"published","language":[{"iso":"eng"}],"date_created":"2025-04-24T07:26:58Z","citation":{"ama":"Rubart J. Multimodal Interaction with Hypermedia Structures. (Atzenbeck C, Association for Computing Machinery-Digital Library, eds.). ACM; 2018:17-21. doi:10.1145/3215611.3215613","van":"Rubart J. Multimodal Interaction with Hypermedia Structures. Atzenbeck C, Association for Computing Machinery-Digital Library, editors. Proceedings of the 1st Workshop on Human Factors in Hypertext. ACM; 2018. (ACM Digital Library).","ieee":"J. Rubart, Multimodal Interaction with Hypermedia Structures. ACM, 2018, pp. 17–21. doi: 10.1145/3215611.3215613.","chicago":"Rubart, Jessica. Multimodal Interaction with Hypermedia Structures. Edited by Claus Atzenbeck and Association for Computing Machinery-Digital Library. Proceedings of the 1st Workshop on Human Factors in Hypertext. ACM Digital Library. ACM, 2018. https://doi.org/10.1145/3215611.3215613.","din1505-2-1":"Rubart, Jessica ; Atzenbeck, C. ; Association for Computing Machinery-Digital Library (Hrsg.): Multimodal Interaction with Hypermedia Structures, ACM Digital Library : ACM, 2018","bjps":"Rubart J (2018) Multimodal Interaction with Hypermedia Structures, Atzenbeck C and Association for Computing Machinery-Digital Library (eds). ACM.","havard":"J. Rubart, Multimodal Interaction with Hypermedia Structures, ACM, 2018.","chicago-de":"Rubart, Jessica. 2018. Multimodal Interaction with Hypermedia Structures. Hg. von Claus Atzenbeck und Association for Computing Machinery-Digital Library. Proceedings of the 1st Workshop on Human Factors in Hypertext. ACM Digital Library. ACM. doi:10.1145/3215611.3215613, .","ufg":"Rubart, Jessica: Multimodal Interaction with Hypermedia Structures, hg. von Atzenbeck, Claus, Association for Computing Machinery-Digital Library, o. O. 2018 (ACM Digital Library).","mla":"Rubart, Jessica. “Multimodal Interaction with Hypermedia Structures.” Proceedings of the 1st Workshop on Human Factors in Hypertext, edited by Claus Atzenbeck and Association for Computing Machinery-Digital Library, ACM, 2018, pp. 17–21, https://doi.org/10.1145/3215611.3215613.","apa":"Rubart, J. (2018). Multimodal Interaction with Hypermedia Structures. In C. Atzenbeck & Association for Computing Machinery-Digital Library (Eds.), Proceedings of the 1st Workshop on Human Factors in Hypertext (pp. 17–21). ACM. https://doi.org/10.1145/3215611.3215613","short":"J. Rubart, Multimodal Interaction with Hypermedia Structures, ACM, 2018."},"_id":"12856","series_title":"ACM Digital Library","publication":"Proceedings of the 1st Workshop on Human Factors in Hypertext"},{"citation":{"havard":"E. Scheideler, A. Huxol, F.-J. Villmer, Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineeringand Management, Lemgo, 2017: pp. 89–100.","mla":"Scheideler, Eva, et al. “Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models.” Production Engineeringand Management, edited by Elio Padoano et al., no. 1, 2017, pp. 89–100.","apa":"Scheideler, E., Huxol, A., & Villmer, F.-J. (2017). Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineeringand Management (pp. 89–100). Lemgo.","short":"E. Scheideler, A. Huxol, F.-J. Villmer, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineeringand Management, Lemgo, 2017, pp. 89–100.","chicago-de":"Scheideler, Eva, Andrea Huxol und Franz-Josef Villmer. 2017. Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In: Production Engineeringand Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 89–100. Publication series in direct digital manufacturing . Lemgo.","ufg":"Scheideler, Eva et. al. (2017): Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models, in: Elio Padoano et. al. (Hgg.): Production Engineeringand Management (=Publication series in direct digital manufacturing ), Lemgo, S. 89–100.","ieee":"E. Scheideler, A. Huxol, and F.-J. Villmer, “Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models,” in Production Engineeringand Management, Pordenone, Italy, 2017, no. 1, pp. 89–100.","ama":"Scheideler E, Huxol A, Villmer F-J. Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineeringand Management. Publication series in direct digital manufacturing . Lemgo; 2017:89-100.","van":"Scheideler E, Huxol A, Villmer F-J. Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineeringand Management. Lemgo; 2017. p. 89–100. (Publication series in direct digital manufacturing ).","din1505-2-1":"Scheideler, Eva ; Huxol, Andrea ; Villmer, Franz-Josef: Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineeringand Management, Publication series in direct digital manufacturing . Lemgo, 2017, S. 89–100","bjps":"Scheideler E, Huxol A and Villmer F-J (2017) Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineeringand Management. Lemgo, pp. 89–100.","chicago":"Scheideler, Eva, Andrea Huxol, and Franz-Josef Villmer. “Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models.” In Production Engineeringand Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 89–100. Publication Series in Direct Digital Manufacturing . Lemgo, 2017."},"place":"Lemgo","publication_status":"published","date_created":"2019-02-18T09:46:43Z","language":[{"iso":"eng"}],"author":[{"first_name":"Eva","full_name":"Scheideler, Eva","last_name":"Scheideler","id":"61522"},{"first_name":"Andrea","full_name":"Huxol, Andrea","id":"43559","last_name":"Huxol"},{"first_name":"Franz-Josef","full_name":"Villmer, Franz-Josef","last_name":"Villmer","id":"14290"}],"publication_identifier":{"isbn":["978-3-946856-01-6"]},"main_file_link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf","open_access":"1"}],"title":"Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models","publication":"Production Engineeringand Management","series_title":"Publication series in direct digital manufacturing ","oa":"1","_id":"570","editor":[{"last_name":"Padoano","full_name":"Padoano, Elio","first_name":"Elio"},{"last_name":"Villmer","full_name":"Villmer, Franz-Josef","first_name":"Franz-Josef"}],"type":"conference","date_updated":"2023-03-15T13:50:01Z","related_material":{"link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf","relation":"contains"}]},"issue":"1","status":"public","user_id":"45673","year":2017,"corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"department":[{"_id":"DEP1306"}],"abstract":[{"text":"Additive manufacturing (AM) has matured rapidly during the last years due to the advancement of AM machines and materials. Nevertheless, the widespread adoption of AM is still challenged by producing parts with reliable quality. The aim of this paper is t o introduce a first approach to apply in-situ monitoring for quality evaluation of produced parts. Based on the monitored data, a model is developed, in order to predict the quality of ready built parts.","lang":"eng"}],"conference":{"location":"Pordenone, Italy","name":"Proceedings7th International Conference","end_date":"2017-09-29","start_date":"2017-09-28"},"page":"89-100","keyword":["Nondestructive quality control","Predictive analytics","Metal model","Additive manufacturing"]},{"title":"Participative Development of an Implementation Process for Worker Assistance Systems","main_file_link":[{"open_access":"1","url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf"}],"publication_identifier":{"isbn":["978-3-946856-01-6"]},"author":[{"first_name":"Tim","full_name":"Kleineberg, Tim","last_name":"Kleineberg","id":"65024"},{"full_name":"Eichelberg, Matthias","last_name":"Eichelberg","id":"60217","first_name":"Matthias"},{"full_name":"Hinrichsen, Sven","id":"49010","last_name":"Hinrichsen","first_name":"Sven"}],"publication_status":"published","language":[{"iso":"eng"}],"date_created":"2019-02-18T11:34:36Z","citation":{"ama":"Kleineberg T, Eichelberg M, Hinrichsen S. Participative Development of an Implementation Process for Worker Assistance Systems. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2017:25-36.","van":"Kleineberg T, Eichelberg M, Hinrichsen S. Participative Development of an Implementation Process for Worker Assistance Systems. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2017. p. 25–36.","ieee":"T. Kleineberg, M. Eichelberg, and S. Hinrichsen, “Participative Development of an Implementation Process for Worker Assistance Systems,” in Production Engineering and Management, Pordenone, Italy, 2017, no. 1, pp. 25–36.","chicago":"Kleineberg, Tim, Matthias Eichelberg, and Sven Hinrichsen. “Participative Development of an Implementation Process for Worker Assistance Systems.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 25–36. Lemgo, 2017.","din1505-2-1":"Kleineberg, Tim ; Eichelberg, Matthias ; Hinrichsen, Sven: Participative Development of an Implementation Process for Worker Assistance Systems. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2017, S. 25–36","bjps":"Kleineberg T, Eichelberg M and Hinrichsen S (2017) Participative Development of an Implementation Process for Worker Assistance Systems. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 25–36.","havard":"T. Kleineberg, M. Eichelberg, S. Hinrichsen, Participative Development of an Implementation Process for Worker Assistance Systems, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017: pp. 25–36.","chicago-de":"Kleineberg, Tim, Matthias Eichelberg und Sven Hinrichsen. 2017. Participative Development of an Implementation Process for Worker Assistance Systems. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 25–36. Lemgo.","ufg":"Kleineberg, Tim et. al. (2017): Participative Development of an Implementation Process for Worker Assistance Systems, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 25–36.","apa":"Kleineberg, T., Eichelberg, M., & Hinrichsen, S. (2017). Participative Development of an Implementation Process for Worker Assistance Systems. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 25–36). Lemgo.","mla":"Kleineberg, Tim, et al. “Participative Development of an Implementation Process for Worker Assistance Systems.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2017, pp. 25–36.","short":"T. Kleineberg, M. Eichelberg, S. Hinrichsen, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017, pp. 25–36."},"place":"Lemgo","oa":"1","_id":"578","publication":"Production Engineering and Management","issue":"1","quality_controlled":"1","date_updated":"2023-03-15T13:50:01Z","type":"conference","editor":[{"full_name":"Padoano, Elio","last_name":"Padoano","first_name":"Elio"},{"first_name":"Franz-Josef","last_name":"Villmer","full_name":"Villmer, Franz-Josef"}],"keyword":["Assistance systems","Change management","Success factors","Process model"],"conference":{"location":"Pordenone, Italy","start_date":"2017-09-28","end_date":"2017-09-29","name":"Proceedings 7th International Conference"},"page":"25-36","abstract":[{"lang":"eng","text":"Challenges of companies are presented by an increasing number of product variants or a growing product complexity in combination with a reduction of lot size. Therefore the scope of the work in the field of manual assembly will be more complex. This situation leads to a need of assistance systems. With these systems, the assembly workers will be qualified to execute their work tasks within the requirements. This approach set up on a further implementation of an assistance system at a great device manufacturer. The main focus of this implementation was the technical and functional design of the assistance system, but a successful implementation requires also an active handling of the change process. The purpose of this paper is the presentation of design principles in form of a process model for the implementation of digital assistance systems. The development of the design principles takes place in a participative approach. Executives, work councilsand workers develop the project results together with external project members. Project managers will be able to manage implementation processes with the results and take all the success factors into account."}],"corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"department":[{"_id":"DEP1306"},{"_id":"DEP7020"},{"_id":"DEP1305"}],"user_id":"49010","year":2017,"status":"public"},{"publication_identifier":{"isbn":["978-3-946856-00-9"]},"author":[{"full_name":"Otte, Andreas","last_name":"Otte","id":"51466","first_name":"Andreas"},{"first_name":"Eva","last_name":"Scheideler","id":"61522","full_name":"Scheideler, Eva"},{"first_name":"Franz-Josef","full_name":"Villmer, Franz-Josef","id":"14290","last_name":"Villmer"}],"publication_status":"published","date_created":"2019-02-18T15:41:41Z","language":[{"iso":"eng"}],"citation":{"bjps":"Otte A, Scheideler E and Villmer F-J (2016) Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Department of Production Engineering and Management. Lemgo, pp. 281–292.","din1505-2-1":"Otte, Andreas ; Scheideler, Eva ; Villmer, Franz-Josef: Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Department of Production Engineering and Management. Lemgo, 2016, S. 281–292","chicago":"Otte, Andreas, Eva Scheideler, and Franz-Josef Villmer. “Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage.” In Department of Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 281–92. Lemgo, 2016.","ieee":"A. Otte, E. Scheideler, and F.-J. Villmer, “Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage,” in Department of Production Engineering and Management, Lemgo, 2016, no. 1, pp. 281–292.","ama":"Otte A, Scheideler E, Villmer F-J. Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Department of Production Engineering and Management. Lemgo; 2016:281-292.","van":"Otte A, Scheideler E, Villmer F-J. Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Department of Production Engineering and Management. Lemgo; 2016. p. 281–92.","short":"A. Otte, E. Scheideler, F.-J. Villmer, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Department of Production Engineering and Management, Lemgo, 2016, pp. 281–292.","mla":"Otte, Andreas, et al. “Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage.” Department of Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2016, pp. 281–92.","apa":"Otte, A., Scheideler, E., & Villmer, F.-J. (2016). Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Department of Production Engineering and Management (pp. 281–292). Lemgo.","ufg":"Otte, Andreas et. al. (2016): Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage, in: Franz-Josef Villmer et. al. (Hgg.): Department of Production Engineering and Management, Lemgo, S. 281–292.","chicago-de":"Otte, Andreas, Eva Scheideler und Franz-Josef Villmer. 2016. Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage. In: Department of Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 281–292. Lemgo.","havard":"A. Otte, E. Scheideler, F.-J. Villmer, Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Department of Production Engineering and Management, Lemgo, 2016: pp. 281–292."},"place":"Lemgo","title":"Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at a Very Early Stage","main_file_link":[{"open_access":"1","url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf"}],"publication":"Department of Production Engineering and Management","_id":"594","oa":"1","type":"conference","editor":[{"last_name":"Villmer","full_name":"Villmer, Franz-Josef","first_name":"Franz-Josef"},{"first_name":"Elio","full_name":"Padoano, Elio","last_name":"Padoano"}],"issue":"1","related_material":{"link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf","relation":"contains"}]},"date_updated":"2023-03-15T13:50:03Z","corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"department":[{"_id":"DEP7000"},{"_id":"DEP1306"}],"year":2016,"user_id":"45673","status":"public","keyword":["Cost prediction","Product realization projects","Monte Carlo method","Parametric cost model","Software tool"],"conference":{"location":"Lemgo","name":"Proceedings 6th International Conference","end_date":"2016-09-30","start_date":"2016-09-29"},"page":"281-292","abstract":[{"text":"Due to steadily increased demand for customized products, as well as their enhanced complexity and shorter product lifecycles, companies in all industries require a reliable prediction of the expected product development costs from the very start of product realization. Incorrectly estimated project costs may lead to serious consequences in the course of a development project. For example, offers are most often based on such early cost estimations and consequently, a major safety margin has to be added, which may result in the refusal of an order. A too low estimation of the costs of aproduct development project, on the other hand, may result in a loss for the project.In this paper, a software tool is presented for the prediction of product development costs which offers the user the ability to create a more accurate prediction of project costs on the basis of a minimum of retrograde project information. By combining a parametric cost model and cost result with stochastic character, based on the Monte Carlo method, in one software system, it is possible to significantly improve projectcost estimations.","lang":"eng"}]},{"language":[{"iso":"eng"}],"date_created":"2021-01-14T10:13:27Z","volume":2,"publication_status":"published","place":" Orléans, ON ","citation":{"havard":"O. Sack, C. Röcker, “Like a Family Member Who Takes Care of Me” – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments, International Journal of Virtual Worlds and Human Computer Interaction. 2 (2014) 28–36.","chicago-de":"Sack, Oliver und Carsten Röcker. 2014. “Like a Family Member Who Takes Care of Me” – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments. International Journal of Virtual Worlds and Human Computer Interaction 2, Nr. 1: 28–36. doi:10.11159/vwhci.2014.004, .","ufg":"Sack, Oliver/Röcker, Carsten (2014): “Like a Family Member Who Takes Care of Me” – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments, in: International Journal of Virtual Worlds and Human Computer Interaction 2 (1), S. 28–36.","mla":"Sack, Oliver, and Carsten Röcker. “‘Like a Family Member Who Takes Care of Me’ – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments.” International Journal of Virtual Worlds and Human Computer Interaction, vol. 2, no. 1, Avestia Publishing, International ASET Inc. , 2014, pp. 28–36, doi:10.11159/vwhci.2014.004.","apa":"Sack, O., & Röcker, C. (2014). “Like a Family Member Who Takes Care of Me” – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments. International Journal of Virtual Worlds and Human Computer Interaction, 2(1), 28–36. https://doi.org/10.11159/vwhci.2014.004","short":"O. Sack, C. Röcker, International Journal of Virtual Worlds and Human Computer Interaction 2 (2014) 28–36.","ama":"Sack O, Röcker C. “Like a Family Member Who Takes Care of Me” – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments. International Journal of Virtual Worlds and Human Computer Interaction. 2014;2(1):28-36. doi:10.11159/vwhci.2014.004","van":"Sack O, Röcker C. “Like a Family Member Who Takes Care of Me” – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments. International Journal of Virtual Worlds and Human Computer Interaction. 2014;2(1):28–36.","ieee":"O. Sack and C. Röcker, “‘Like a Family Member Who Takes Care of Me’ – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments,” International Journal of Virtual Worlds and Human Computer Interaction, vol. 2, no. 1, pp. 28–36, 2014.","chicago":"Sack, Oliver, and Carsten Röcker. “‘Like a Family Member Who Takes Care of Me’ – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments.” International Journal of Virtual Worlds and Human Computer Interaction 2, no. 1 (2014): 28–36. https://doi.org/10.11159/vwhci.2014.004.","din1505-2-1":"Sack, Oliver ; Röcker, Carsten: “Like a Family Member Who Takes Care of Me” – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments. In: International Journal of Virtual Worlds and Human Computer Interaction Bd. 2. Orléans, ON , Avestia Publishing, International ASET Inc. (2014), Nr. 1, S. 28–36","bjps":"Sack O and Röcker C (2014) “Like a Family Member Who Takes Care of Me” – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments. International Journal of Virtual Worlds and Human Computer Interaction 2, 28–36."},"publication_identifier":{"eissn":["2368-6103"]},"author":[{"first_name":"Oliver","full_name":"Sack, Oliver","last_name":"Sack"},{"last_name":"Röcker","id":"61525","full_name":"Röcker, Carsten","first_name":"Carsten"}],"intvolume":" 2","title":"“Like a Family Member Who Takes Care of Me” – Users’ Anthropomorphic Representations and Trustworthiness of Smart Home Environments","main_file_link":[{"open_access":"1"}],"publication":"International Journal of Virtual Worlds and Human Computer Interaction","_id":"4377","oa":"1","publisher":" Avestia Publishing, International ASET Inc. ","type":"journal_article","date_updated":"2023-03-15T13:49:52Z","doi":"10.11159/vwhci.2014.004","issue":"1","status":"public","department":[{"_id":"DEP5023"}],"year":2014,"user_id":"15514","page":"28 - 36","abstract":[{"text":"Within the last years the concept of trust has attracted increased attention in the field of smart home environments. However, little is known about what determines trustworthiness in this context. For this reason the objective was to examine mental models in terms of anthropomorphic perception of smart home environments and its relation to trustworthiness. Two studies (N=36) were carried out in the Future Care Lab, a simulated intelligent home environment. We used the teach-back method to help participants to talk about the smart home environment technology and asked to generate a metaphor of an experienced home-monitoring scenario. Finally, we applied linguistic analysis of responses to detect anthropomorphic characteristics. In general, results demonstrate inspiring metaphors related to the personal assistance system, e.g. \"like an airbag…\" or \"like a family member…\", which might be useful for future interface designs and approaches of communication in the context of smart home environments. However, no relation of anthropomorphism and trustworthiness could be found. Therefore, we suggest an anthropomorphic threshold, which should be investigated by using an improved method and trust scale.","lang":"eng"}],"keyword":["Smart environment","e-health","user study","mental model","anthropomorphism","metaphor","technology acceptance","trust","evaluation"],"extern":"1"},{"publication":"Journal of Hydrology","_id":"12249","volume":496,"publication_status":"published","language":[{"iso":"eng"}],"date_created":"2024-12-08T20:44:14Z","citation":{"din1505-2-1":"Kirillin, Georgiy ; Shatwell, Tom ; Kasprzak, Peter: Consequences of thermal pollution from a nuclear plant on lake temperature and mixing regime. In: Journal of Hydrology Bd. 496. Amsterdam, Elsevier BV (2013), Nr. 7, S. 47–56","bjps":"Kirillin G, Shatwell T and Kasprzak P (2013) Consequences of Thermal Pollution from a Nuclear Plant on Lake Temperature and Mixing Regime. Journal of Hydrology 496, 47–56.","chicago":"Kirillin, Georgiy, Tom Shatwell, and Peter Kasprzak. “Consequences of Thermal Pollution from a Nuclear Plant on Lake Temperature and Mixing Regime.” Journal of Hydrology 496, no. 7 (2013): 47–56. https://doi.org/10.1016/j.jhydrol.2013.05.023.","ieee":"G. Kirillin, T. Shatwell, and P. Kasprzak, “Consequences of thermal pollution from a nuclear plant on lake temperature and mixing regime,” Journal of Hydrology, vol. 496, no. 7, pp. 47–56, 2013, doi: 10.1016/j.jhydrol.2013.05.023.","ama":"Kirillin G, Shatwell T, Kasprzak P. Consequences of thermal pollution from a nuclear plant on lake temperature and mixing regime. Journal of Hydrology. 2013;496(7):47-56. doi:10.1016/j.jhydrol.2013.05.023","van":"Kirillin G, Shatwell T, Kasprzak P. Consequences of thermal pollution from a nuclear plant on lake temperature and mixing regime. Journal of Hydrology. 2013;496(7):47–56.","apa":"Kirillin, G., Shatwell, T., & Kasprzak, P. (2013). Consequences of thermal pollution from a nuclear plant on lake temperature and mixing regime. Journal of Hydrology, 496(7), 47–56. https://doi.org/10.1016/j.jhydrol.2013.05.023","mla":"Kirillin, Georgiy, et al. “Consequences of Thermal Pollution from a Nuclear Plant on Lake Temperature and Mixing Regime.” Journal of Hydrology, vol. 496, no. 7, 2013, pp. 47–56, https://doi.org/10.1016/j.jhydrol.2013.05.023.","short":"G. Kirillin, T. Shatwell, P. Kasprzak, Journal of Hydrology 496 (2013) 47–56.","chicago-de":"Kirillin, Georgiy, Tom Shatwell und Peter Kasprzak. 2013. Consequences of thermal pollution from a nuclear plant on lake temperature and mixing regime. Journal of Hydrology 496, Nr. 7: 47–56. doi:10.1016/j.jhydrol.2013.05.023, .","ufg":"Kirillin, Georgiy/Shatwell, Tom/Kasprzak, Peter: Consequences of thermal pollution from a nuclear plant on lake temperature and mixing regime, in: Journal of Hydrology 496 (2013), H. 7, S. 47–56.","havard":"G. Kirillin, T. Shatwell, P. Kasprzak, Consequences of thermal pollution from a nuclear plant on lake temperature and mixing regime, Journal of Hydrology. 496 (2013) 47–56."},"place":"Amsterdam","publication_identifier":{"issn":["0022-1694"],"eissn":["1879-2707"]},"intvolume":" 496","author":[{"full_name":"Kirillin, Georgiy","last_name":"Kirillin","first_name":"Georgiy"},{"orcid":"0000-0002-4520-7916","full_name":"Shatwell, Tom","id":"86424","last_name":"Shatwell","first_name":"Tom"},{"full_name":"Kasprzak, Peter","last_name":"Kasprzak","first_name":"Peter"}],"title":"Consequences of thermal pollution from a nuclear plant on lake temperature and mixing regime","main_file_link":[{"url":"https://doi.org/10.1016/j.jhydrol.2013.05.023"}],"status":"public","department":[{"_id":"DEP8022"}],"year":"2013","user_id":"83781","page":"47-56","abstract":[{"text":"We investigated the combined effects of thermal pollution from a nuclear power plant (NPP) and regional climate warming on the thermal regime of a lake. For this purpose, we used the lake model FLake and analyzed 50 years of temperature data from Lake Stechlin, Germany, which served as the cooling water reservoir for the Rheinsberg NPP from 1966 until 1990. Both modeling and statistical data analysis revealed a strong influence of the NPP cooling water discharge on the lake water temperatures and the vertical stability of the water column. A remarkable effect of thermal pollution consisted of strong vertical mixing in winter produced by the discharge of warm water into the lake when ambient water temperatures were below 4 °C. This effect caused a significant increase in the deep hypolimnion temperatures and a corresponding decrease of the vertical stability in the summer. In turn, climate warming had the opposite effect on the summer stability by increasing lake surface temperatures. Both the thermal pollution and climate change increased the duration of the summer stratification period. Our results suggest that industrial thermal pollution in temperate lakes during winter is stored in the deep water column until the next winter, whereas heat added in the summer dissipates relatively rapidly into the atmosphere. Accordingly, the winter thermal pollution could have a long-lasting effect on the lake ecology by affecting benthic biogeochemical processes.","lang":"eng"}],"keyword":["Industrial thermal pollution","Global warming","Lake stratification","FLake model"],"extern":"1","publisher":"Elsevier BV","type":"scientific_journal_article","quality_controlled":"1","date_updated":"2024-12-09T09:02:37Z","doi":"10.1016/j.jhydrol.2013.05.023","issue":"7"},{"intvolume":" 1","author":[{"first_name":"Oliver","last_name":"Sack","full_name":"Sack, Oliver"},{"first_name":"Carsten","full_name":"Röcker, Carsten","last_name":"Röcker","id":"61525"}],"publication_identifier":{"isbn":["2332-3477"],"eissn":["2332-3485 "]},"place":" Alhambra, Calif.","citation":{"ama":"Sack O, Röcker C. Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups. Universal Journal of Psychology. 2013;1(2):72-83. doi:10.13189/ujp.2013.010207","van":"Sack O, Röcker C. Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups. Universal Journal of Psychology. 2013;1(2):72–83.","havard":"O. Sack, C. Röcker, Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups, Universal Journal of Psychology. 1 (2013) 72–83.","ieee":"O. Sack and C. Röcker, “Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups,” Universal Journal of Psychology, vol. 1, no. 2, pp. 72–83, 2013.","ufg":"Sack, Oliver/Röcker, Carsten (2013): Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups, in: Universal Journal of Psychology 1 (2), S. 72–83.","chicago":"Sack, Oliver, and Carsten Röcker. “Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups.” Universal Journal of Psychology 1, no. 2 (2013): 72–83. https://doi.org/10.13189/ujp.2013.010207.","chicago-de":"Sack, Oliver und Carsten Röcker. 2013. Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups. Universal Journal of Psychology 1, Nr. 2: 72–83. doi:10.13189/ujp.2013.010207, .","short":"O. Sack, C. Röcker, Universal Journal of Psychology 1 (2013) 72–83.","bjps":"Sack O and Röcker C (2013) Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups. Universal Journal of Psychology 1, 72–83.","apa":"Sack, O., & Röcker, C. (2013). Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups. Universal Journal of Psychology, 1(2), 72–83. https://doi.org/10.13189/ujp.2013.010207","mla":"Sack, Oliver, and Carsten Röcker. “Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups.” Universal Journal of Psychology, vol. 1, no. 2, Horizion , 2013, pp. 72–83, doi:10.13189/ujp.2013.010207.","din1505-2-1":"Sack, Oliver ; Röcker, Carsten: Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups. In: Universal Journal of Psychology Bd. 1. Alhambra, Calif., Horizion (2013), Nr. 2, S. 72–83"},"date_created":"2021-01-15T10:49:18Z","language":[{"iso":"eng"}],"volume":1,"publication_status":"published","main_file_link":[{"open_access":"1"}],"title":"Privacy and Security in Technology-Enhanced Environments: Exploring Users’ Knowledge about Technological Processes of Diverse User Groups","publication":"Universal Journal of Psychology","_id":"4381","oa":"1","type":"journal_article","publisher":"Horizion ","issue":"2","date_updated":"2023-03-15T13:49:52Z","doi":"10.13189/ujp.2013.010207","year":2013,"user_id":"15514","department":[{"_id":"DEP5023"}],"status":"public","extern":"1","keyword":["Technology-enhanced Environment","Ambient Assisted Living","Mental Model","Teach Back","Privacy","Security"],"abstract":[{"text":"This article reports on two user studies exploring the knowledge of end users about technical processes of technology-enhanced home environments, which are often assumed to play an important role for attitudes such as privacy and security. In the first study (n=12 participants between 19-71 years of age), we analyzed user knowledge about technical processes using the teach-back methodology. In the second study, we additionally applied new developed questionnaires and analyzed participants’ data (n=24 participants between 19-76 years of age) regarding relations of user factors, users’ knowledge about technical processes and attitudes such as privacy and security of technology-enhanced environments. In contrast to existing assumptions, the results showed that general structural knowledge about technical processes was not related with attitudes such as privacy and security. Additionally, we found that most participants had only relatively superficial knowledge about technical processes, which was further influenced by age and technology experience.","lang":"eng"}],"page":"72 - 83"},{"date_created":"2021-09-17T07:04:45Z","language":[{"iso":"ger"}],"citation":{"ieee":"R. Czwalinna, P. Wilhelm, G. Lehre, and U. Müller, “Vergleich zweier Gefrierverfahren von Stutenmilch hinsichtlich der anschließenden Vakuumgefriertrocknung, Kurzfassung,” presented at the Proceedings zum GDL-Kongress Lebensmitteltechnologie 2001, GDL , Berlin, 2001.","ama":"Czwalinna R, Wilhelm P, Lehre G, Müller U. Vergleich zweier Gefrierverfahren von Stutenmilch hinsichtlich der anschließenden Vakuumgefriertrocknung, Kurzfassung. In: ; 2001.","van":"Czwalinna R, Wilhelm P, Lehre G, Müller U. Vergleich zweier Gefrierverfahren von Stutenmilch hinsichtlich der anschließenden Vakuumgefriertrocknung, Kurzfassung. In 2001.","bjps":"Czwalinna R et al. (2001) Vergleich zweier Gefrierverfahren von Stutenmilch hinsichtlich der anschließenden Vakuumgefriertrocknung, Kurzfassung.","din1505-2-1":"Czwalinna, R. ; Wilhelm, Patrick ; Lehre, Gerhard ; Müller, Ulrich: Vergleich zweier Gefrierverfahren von Stutenmilch hinsichtlich der anschließenden Vakuumgefriertrocknung, Kurzfassung. In: , 2001","chicago":"Czwalinna, R., Patrick Wilhelm, Gerhard Lehre, and Ulrich Müller. “Vergleich zweier Gefrierverfahren von Stutenmilch hinsichtlich der anschließenden Vakuumgefriertrocknung, Kurzfassung,” 2001.","havard":"R. Czwalinna, P. Wilhelm, G. Lehre, U. Müller, Vergleich zweier Gefrierverfahren von Stutenmilch hinsichtlich der anschließenden Vakuumgefriertrocknung, Kurzfassung, in: 2001.","short":"R. Czwalinna, P. Wilhelm, G. Lehre, U. Müller, in: 2001.","mla":"Czwalinna, R., et al. Vergleich zweier Gefrierverfahren von Stutenmilch hinsichtlich der anschließenden Vakuumgefriertrocknung, Kurzfassung. 2001.","apa":"Czwalinna, R., Wilhelm, P., Lehre, G., & Müller, U. (2001). Vergleich zweier Gefrierverfahren von Stutenmilch hinsichtlich der anschließenden Vakuumgefriertrocknung, Kurzfassung. Presented at the Proceedings zum GDL-Kongress Lebensmitteltechnologie 2001, GDL , Berlin.","ufg":"Czwalinna, R. et. al. (2001): Vergleich zweier Gefrierverfahren von Stutenmilch hinsichtlich der anschließenden Vakuumgefriertrocknung, Kurzfassung, in: .","chicago-de":"Czwalinna, R., Patrick Wilhelm, Gerhard Lehre und Ulrich Müller. 2001. Vergleich zweier Gefrierverfahren von Stutenmilch hinsichtlich der anschließenden Vakuumgefriertrocknung, Kurzfassung. In: ."},"author":[{"full_name":"Czwalinna, R.","last_name":"Czwalinna","first_name":"R."},{"first_name":"Patrick","id":"12013","last_name":"Wilhelm","full_name":"Wilhelm, Patrick"},{"first_name":"Gerhard","full_name":"Lehre, Gerhard","last_name":"Lehre","id":"12024"},{"first_name":"Ulrich","id":"12119","last_name":"Müller","full_name":"Müller, Ulrich"}],"type":"conference_abstract","title":"Vergleich zweier Gefrierverfahren von Stutenmilch hinsichtlich der anschließenden Vakuumgefriertrocknung, Kurzfassung","date_updated":"2023-03-15T13:50:05Z","status":"public","department":[{"_id":"DEP4009"}],"year":2001,"user_id":"74222","conference":{"location":"Berlin","name":"Proceedings zum GDL-Kongress Lebensmitteltechnologie 2001, GDL ","end_date":"2001-11-10","start_date":"2001-11-08"},"keyword":["GDL e. V.","Bonn","(ISDN 3-931678-04-0)"],"_id":"6356"}]