---
_id: '12760'
abstract:
- lang: eng
text: Various degradation mechanisms can diminish the performance of electrical
connectors in automobiles over time. It is crucial to gain an in-depth understanding
of the failure mechanisms and their interactions, as well as to systematically
analyze the failure mechanisms of connectors, assess their state of health, and
predict the probability of failure in the future. This work provides a comprehensive
overview of degradation mechanisms in electrical connectors, including fretting
corrosion, oxidation, delamination, wear through of the protective coating, stress
relaxation and plastic deformation. It focuses on mechanisms that contribute to
increased contact resistance over time and proposes a unified model to explain
their interactions. The study introduces a structured methodology for assessing
connector health by outlining key measurement techniques and presenting an efficient
approach to failure and state analysis that minimizes both testing time and sample
size. This methodology is supported by analyses of connectors from long-term life
tests and field-used, field-tested vehicles. Additionally, the study explores
new aspects of the state analysis for accelerated testing of connectors, supported
by examples from field-tested vehicles and various test methods, to predict connectors
lifetime and evaluate the effectiveness of existing testing approaches.
article_number: '109427'
author:
- first_name: Jian
full_name: Song, Jian
id: '5297'
last_name: Song
- first_name: Dirk
full_name: Hilmert, Dirk
id: '74212'
last_name: Hilmert
- first_name: Frederik
full_name: Kiel, Frederik
id: '87296'
last_name: Kiel
citation:
ama: Song J, Hilmert D, Kiel F. Mechanisms of failure and state analysis of electrical
connectors in automobiles. Engineering Failure Analysis. 2025;173(5). doi:10.1016/j.engfailanal.2025.109427
apa: Song, J., Hilmert, D., & Kiel, F. (2025). Mechanisms of failure and state
analysis of electrical connectors in automobiles. Engineering Failure Analysis,
173(5), Article 109427. https://doi.org/10.1016/j.engfailanal.2025.109427
bjps: Song J, Hilmert D and Kiel F (2025) Mechanisms of Failure and State
Analysis of Electrical Connectors in Automobiles. Engineering Failure Analysis
173.
chicago: Song, Jian, Dirk Hilmert, and Frederik Kiel. “Mechanisms of Failure and
State Analysis of Electrical Connectors in Automobiles.” Engineering Failure
Analysis 173, no. 5 (2025). https://doi.org/10.1016/j.engfailanal.2025.109427.
chicago-de: Song, Jian, Dirk Hilmert und Frederik Kiel. 2025. Mechanisms of failure
and state analysis of electrical connectors in automobiles. Engineering Failure
Analysis 173, Nr. 5. doi:10.1016/j.engfailanal.2025.109427,
.
din1505-2-1: 'Song, Jian ; Hilmert,
Dirk ; Kiel, Frederik: Mechanisms
of failure and state analysis of electrical connectors in automobiles. In: Engineering
Failure Analysis Bd. 173. Amsterdam [u.a.], Elsevier (2025), Nr. 5'
havard: J. Song, D. Hilmert, F. Kiel, Mechanisms of failure and state analysis of
electrical connectors in automobiles, Engineering Failure Analysis. 173 (2025).
ieee: 'J. Song, D. Hilmert, and F. Kiel, “Mechanisms of failure and state analysis
of electrical connectors in automobiles,” Engineering Failure Analysis,
vol. 173, no. 5, Art. no. 109427, 2025, doi: 10.1016/j.engfailanal.2025.109427.'
mla: Song, Jian, et al. “Mechanisms of Failure and State Analysis of Electrical
Connectors in Automobiles.” Engineering Failure Analysis, vol. 173, no.
5, 109427, 2025, https://doi.org/10.1016/j.engfailanal.2025.109427.
short: J. Song, D. Hilmert, F. Kiel, Engineering Failure Analysis 173 (2025).
ufg: 'Song, Jian/Hilmert, Dirk/Kiel, Frederik: Mechanisms of failure and
state analysis of electrical connectors in automobiles, in: Engineering Failure
Analysis 173 (2025), H. 5.'
van: Song J, Hilmert D, Kiel F. Mechanisms of failure and state analysis of electrical
connectors in automobiles. Engineering Failure Analysis. 2025;173(5).
date_created: 2025-04-04T09:17:03Z
date_updated: 2025-06-25T07:08:31Z
department:
- _id: DEP6012
doi: 10.1016/j.engfailanal.2025.109427
external_id:
isi:
- '001431374000001'
intvolume: ' 173'
isi: '1'
issue: '5'
keyword:
- Combined failure mechanisms
- Combination of analytical methods
- Procedure of analysis
language:
- iso: eng
place: Amsterdam [u.a.]
publication: Engineering Failure Analysis
publication_identifier:
eissn:
- 1873-1961
issn:
- 1350-6307
publication_status: published
publisher: Elsevier
quality_controlled: '1'
status: public
title: Mechanisms of failure and state analysis of electrical connectors in automobiles
type: scientific_journal_article
user_id: '83781'
volume: 173
year: '2025'
...
---
_id: '12876'
abstract:
- lang: eng
text: "Carrot juice is valued for its high vitamin and antioxidant content, necessitating
gentle thermal processing\r\nto preserve these nutrients. Its slightly acidic
pH value requires a two-step heating process, warranting\r\noptimization to enhance
product quality and resource efficiency. This study investigated the impact of\r\nvarying
the first heating step between 100 and 130 °C on chemical, sensory, and microbiological
parameters.\r\nWhile other chemical parameters remained stable, lactic acid content
increased significantly from 55 to 1405\r\nmg/L over downtimes, highlighting the
influence of external factors that could not be influenced within the\r\ninvestigations.
Lower heating temperatures compromised microbiological stability, with spore-forming\r\nbacteria
(5 colony forming units per 20 mL) detected at just a 10 °C reduction. Sensory
quality showed\r\nminimal change, with descriptive analysis identifying only 3
respectively 4 significantly different attributes\r\nout of 19 across the factors
experimental parameter setting and technical repetition. The quality of raw\r\nmaterials
had a more pronounced impact on sensory outcomes than the heating temperature.
This study\r\nconcludes that adjusting the first heating temperature has limited
benefits for sensory quality but risks\r\nmicrobiological safety. Emphasis should
therefore be placed on ensuring high-quality raw materials and\r\nconsistent raw
juice properties to maintain product quality."
author:
- first_name: Imke
full_name: Weishaupt, Imke
id: '58425'
last_name: Weishaupt
- first_name: Linda
full_name: Katsch, Linda
id: '71614'
last_name: Katsch
orcid: '0000-0001-6628-3929 '
- first_name: Martina
full_name: Sokolowsky, Martina
id: '76708'
last_name: Sokolowsky
- first_name: Jan
full_name: Schneider, Jan
id: '13209'
last_name: Schneider
orcid: 0000-0001-6401-8873
citation:
ama: 'Weishaupt I, Katsch L, Sokolowsky M, Schneider J. Comparative study on the
effect of mild temperature conditions in fractionated sterilization of carrot
juice on microbiological stability and sensory properties. Brewing science :
the scientific organ of the Weihenstephan Scientific Centre of the TU Munich,
of Versuchs- and Lehranstalt für Brauerei in Berlin (VLB), of the Scientific Station
for Breweries in Munich, of the Veritas laboratory in Zurich, of Doemens wba-Technikum
Gmbh in Graefelfing/Munich = Monatsschrift für Brauwissenschaft. 2025;78(3/4):17-26.
doi:10.23763/BrSc25-04weishaupt'
apa: 'Weishaupt, I., Katsch, L., Sokolowsky, M., & Schneider, J. (2025). Comparative
study on the effect of mild temperature conditions in fractionated sterilization
of carrot juice on microbiological stability and sensory properties. Brewing
Science : The Scientific Organ of the Weihenstephan Scientific Centre of the TU
Munich, of Versuchs- and Lehranstalt Für Brauerei in Berlin (VLB), of the Scientific
Station for Breweries in Munich, of the Veritas Laboratory in Zurich, of Doemens
Wba-Technikum Gmbh in Graefelfing/Munich = Monatsschrift Für Brauwissenschaft,
78(3/4), 17–26. https://doi.org/10.23763/BrSc25-04weishaupt'
bjps: 'Weishaupt I et al. (2025) Comparative Study on the Effect of
Mild Temperature Conditions in Fractionated Sterilization of Carrot Juice on Microbiological
Stability and Sensory Properties. Brewing science : the scientific organ of
the Weihenstephan Scientific Centre of the TU Munich, of Versuchs- and Lehranstalt
für Brauerei in Berlin (VLB), of the Scientific Station for Breweries in Munich,
of the Veritas laboratory in Zurich, of Doemens wba-Technikum Gmbh in Graefelfing/Munich
= Monatsschrift für Brauwissenschaft 78, 17–26.'
chicago: 'Weishaupt, Imke, Linda Katsch, Martina Sokolowsky, and Jan Schneider.
“Comparative Study on the Effect of Mild Temperature Conditions in Fractionated
Sterilization of Carrot Juice on Microbiological Stability and Sensory Properties.”
Brewing Science : The Scientific Organ of the Weihenstephan Scientific Centre
of the TU Munich, of Versuchs- and Lehranstalt Für Brauerei in Berlin (VLB), of
the Scientific Station for Breweries in Munich, of the Veritas Laboratory in Zurich,
of Doemens Wba-Technikum Gmbh in Graefelfing/Munich = Monatsschrift Für Brauwissenschaft
78, no. 3/4 (2025): 17–26. https://doi.org/10.23763/BrSc25-04weishaupt.'
chicago-de: 'Weishaupt, Imke, Linda Katsch, Martina Sokolowsky und Jan Schneider.
2025. Comparative study on the effect of mild temperature conditions in fractionated
sterilization of carrot juice on microbiological stability and sensory properties.
Brewing science : the scientific organ of the Weihenstephan Scientific Centre
of the TU Munich, of Versuchs- and Lehranstalt für Brauerei in Berlin (VLB), of
the Scientific Station for Breweries in Munich, of the Veritas laboratory in Zurich,
of Doemens wba-Technikum Gmbh in Graefelfing/Munich = Monatsschrift für Brauwissenschaft
78, Nr. 3/4: 17–26. doi:10.23763/BrSc25-04weishaupt,
.'
din1505-2-1: 'Weishaupt, Imke ; Katsch, Linda ; Sokolowsky,
Martina ; Schneider, Jan:
Comparative study on the effect of mild temperature conditions in fractionated
sterilization of carrot juice on microbiological stability and sensory properties.
In: Brewing science : the scientific organ of the Weihenstephan Scientific
Centre of the TU Munich, of Versuchs- and Lehranstalt für Brauerei in Berlin (VLB),
of the Scientific Station for Breweries in Munich, of the Veritas laboratory in
Zurich, of Doemens wba-Technikum Gmbh in Graefelfing/Munich = Monatsschrift für
Brauwissenschaft Bd. 78. Nürnberg, Fachverlag Hans Carl GmbH (2025), Nr. 3/4,
S. 17–26'
havard: 'I. Weishaupt, L. Katsch, M. Sokolowsky, J. Schneider, Comparative study
on the effect of mild temperature conditions in fractionated sterilization of
carrot juice on microbiological stability and sensory properties, Brewing Science :
The Scientific Organ of the Weihenstephan Scientific Centre of the TU Munich,
of Versuchs- and Lehranstalt Für Brauerei in Berlin (VLB), of the Scientific Station
for Breweries in Munich, of the Veritas Laboratory in Zurich, of Doemens Wba-Technikum
Gmbh in Graefelfing/Munich = Monatsschrift Für Brauwissenschaft. 78 (2025) 17–26.'
ieee: 'I. Weishaupt, L. Katsch, M. Sokolowsky, and J. Schneider, “Comparative study
on the effect of mild temperature conditions in fractionated sterilization of
carrot juice on microbiological stability and sensory properties,” Brewing
science : the scientific organ of the Weihenstephan Scientific Centre of the TU
Munich, of Versuchs- and Lehranstalt für Brauerei in Berlin (VLB), of the Scientific
Station for Breweries in Munich, of the Veritas laboratory in Zurich, of Doemens
wba-Technikum Gmbh in Graefelfing/Munich = Monatsschrift für Brauwissenschaft,
vol. 78, no. 3/4, pp. 17–26, 2025, doi: 10.23763/BrSc25-04weishaupt.'
mla: 'Weishaupt, Imke, et al. “Comparative Study on the Effect of Mild Temperature
Conditions in Fractionated Sterilization of Carrot Juice on Microbiological Stability
and Sensory Properties.” Brewing Science : The Scientific Organ of the Weihenstephan
Scientific Centre of the TU Munich, of Versuchs- and Lehranstalt Für Brauerei
in Berlin (VLB), of the Scientific Station for Breweries in Munich, of the Veritas
Laboratory in Zurich, of Doemens Wba-Technikum Gmbh in Graefelfing/Munich = Monatsschrift
Für Brauwissenschaft, vol. 78, no. 3/4, 2025, pp. 17–26, https://doi.org/10.23763/BrSc25-04weishaupt.'
short: 'I. Weishaupt, L. Katsch, M. Sokolowsky, J. Schneider, Brewing Science :
The Scientific Organ of the Weihenstephan Scientific Centre of the TU Munich,
of Versuchs- and Lehranstalt Für Brauerei in Berlin (VLB), of the Scientific Station
for Breweries in Munich, of the Veritas Laboratory in Zurich, of Doemens Wba-Technikum
Gmbh in Graefelfing/Munich = Monatsschrift Für Brauwissenschaft 78 (2025) 17–26.'
ufg: 'Weishaupt, Imke u. a.: Comparative study on the effect of mild temperature
conditions in fractionated sterilization of carrot juice on microbiological stability
and sensory properties, in: Brewing science : the scientific organ of the Weihenstephan
Scientific Centre of the TU Munich, of Versuchs- and Lehranstalt für Brauerei
in Berlin (VLB), of the Scientific Station for Breweries in Munich, of the Veritas
laboratory in Zurich, of Doemens wba-Technikum Gmbh in Graefelfing/Munich = Monatsschrift
für Brauwissenschaft 78 (2025), H. 3/4, S. 17–26.'
van: 'Weishaupt I, Katsch L, Sokolowsky M, Schneider J. Comparative study on the
effect of mild temperature conditions in fractionated sterilization of carrot
juice on microbiological stability and sensory properties. Brewing science : the
scientific organ of the Weihenstephan Scientific Centre of the TU Munich, of Versuchs-
and Lehranstalt für Brauerei in Berlin (VLB), of the Scientific Station for Breweries
in Munich, of the Veritas laboratory in Zurich, of Doemens wba-Technikum Gmbh
in Graefelfing/Munich = Monatsschrift für Brauwissenschaft. 2025;78(3/4):17–26.'
date_created: 2025-04-29T13:37:19Z
date_updated: 2025-06-24T12:17:41Z
department:
- _id: DEP4028
doi: 10.23763/BrSc25-04weishaupt
intvolume: ' 78'
issue: 3/4
keyword:
- fractionated sterilization
- carrot juice
- descriptive analysis
- microbiological stability
language:
- iso: eng
main_file_link:
- url: https://doi.org/10.23763/BrSc25-04weishaupt
page: 17-26
place: Nürnberg
publication: 'Brewing science : the scientific organ of the Weihenstephan Scientific
Centre of the TU Munich, of Versuchs- and Lehranstalt für Brauerei in Berlin (VLB),
of the Scientific Station for Breweries in Munich, of the Veritas laboratory in
Zurich, of Doemens wba-Technikum Gmbh in Graefelfing/Munich = Monatsschrift für
Brauwissenschaft'
publication_identifier:
issn:
- '1866-5195 '
publication_status: published
publisher: Fachverlag Hans Carl GmbH
quality_controlled: '1'
status: public
title: Comparative study on the effect of mild temperature conditions in fractionated
sterilization of carrot juice on microbiological stability and sensory properties
type: scientific_journal_article
user_id: '83781'
volume: 78
year: '2025'
...
---
_id: '13022'
abstract:
- lang: eng
text: Numerous single-track railway lines are currently disused due to economic
factors. These lines could potentially be reactivated by small vehicles that utilise
only a single rail, enabling bidirectional operation simultaneously. The MONOCAB
is such a compact monorail vehicle, stabilised by a system of control moment gyroscopes
(CMGs) and a laterally movable, controllable trim mass. Despite their potential,
there is currently a lack of comparative references for MONOCABs in relation to
other vehicles. In the context of mechanical design and construction, interdependencies
with roll stabilisation occur. Of particular concern are torsional effects, which
can significantly impact stability. This study investigates the structural dynamics
of monorail vehicles with a focus on the influence of gyroscopes. Gyroscopic systems
play a significant role in the behaviour of such vehicles, affecting stability,
control and response to external disturbances. Through a comprehensive approach
encompassing analytical modelling, numerical simulations, and experimental validation,
the interactions between the vehicle's structure and gyroscopic components are
explored. The analytical considerations are validated via experimentally derived
frequency responses utilising a full-scale monorail vehicle. The results of this
study have implications for various fields, such as transportation, robotics and
aerospace engineering.
author:
- first_name: Martin
full_name: Griese, Martin
id: '52308'
last_name: Griese
- first_name: Thomas
full_name: Schulte, Thomas
id: '46242'
last_name: Schulte
citation:
ama: 'Griese M, Schulte T. Gyroscopic effects in the structural dynamics of monorail
vehicles. Vehicle system dynamics : international journal of vehicle mechanics
and mobility. 2025;63. doi:10.1080/00423114.2025.2480820'
apa: 'Griese, M., & Schulte, T. (2025). Gyroscopic effects in the structural
dynamics of monorail vehicles. Vehicle System Dynamics : International Journal
of Vehicle Mechanics and Mobility, 63. https://doi.org/10.1080/00423114.2025.2480820'
bjps: 'Griese M and Schulte T (2025) Gyroscopic Effects in the Structural
Dynamics of Monorail Vehicles. Vehicle system dynamics : international journal
of vehicle mechanics and mobility 63.'
chicago: 'Griese, Martin, and Thomas Schulte. “Gyroscopic Effects in the Structural
Dynamics of Monorail Vehicles.” Vehicle System Dynamics : International Journal
of Vehicle Mechanics and Mobility 63 (2025). https://doi.org/10.1080/00423114.2025.2480820.'
chicago-de: 'Griese, Martin und Thomas Schulte. 2025. Gyroscopic effects in the
structural dynamics of monorail vehicles. Vehicle system dynamics : international
journal of vehicle mechanics and mobility 63. doi:10.1080/00423114.2025.2480820,
.'
din1505-2-1: 'Griese, Martin ; Schulte, Thomas: Gyroscopic effects in
the structural dynamics of monorail vehicles. In: Vehicle system dynamics :
international journal of vehicle mechanics and mobility Bd. 63. London [u.a.],
Taylor & Francis (2025)'
havard: 'M. Griese, T. Schulte, Gyroscopic effects in the structural dynamics of
monorail vehicles, Vehicle System Dynamics : International Journal of Vehicle
Mechanics and Mobility. 63 (2025).'
ieee: 'M. Griese and T. Schulte, “Gyroscopic effects in the structural dynamics
of monorail vehicles,” Vehicle system dynamics : international journal of vehicle
mechanics and mobility, vol. 63, 2025, doi: 10.1080/00423114.2025.2480820.'
mla: 'Griese, Martin, and Thomas Schulte. “Gyroscopic Effects in the Structural
Dynamics of Monorail Vehicles.” Vehicle System Dynamics : International Journal
of Vehicle Mechanics and Mobility, vol. 63, 2025, https://doi.org/10.1080/00423114.2025.2480820.'
short: 'M. Griese, T. Schulte, Vehicle System Dynamics : International Journal of
Vehicle Mechanics and Mobility 63 (2025).'
ufg: 'Griese, Martin/Schulte, Thomas: Gyroscopic effects in the structural
dynamics of monorail vehicles, in: Vehicle system dynamics : international
journal of vehicle mechanics and mobility 63 (2025).'
van: 'Griese M, Schulte T. Gyroscopic effects in the structural dynamics of monorail
vehicles. Vehicle system dynamics : international journal of vehicle mechanics
and mobility. 2025;63.'
date_created: 2025-06-25T07:50:04Z
date_updated: 2025-06-25T08:14:58Z
department:
- _id: DEP6020
- _id: DEP5022
doi: 10.1080/00423114.2025.2480820
external_id:
isi:
- '001467951500001'
intvolume: ' 63'
isi: '1'
keyword:
- Vehicle dynamics
- rail vehicle
- control moment gyroscope
- stabilisation control
- motion control
- stability analysis
language:
- iso: eng
place: London [u.a.]
publication: 'Vehicle system dynamics : international journal of vehicle mechanics
and mobility'
publication_identifier:
eissn:
- 1744-5159
issn:
- 0042-3114
publication_status: published
publisher: Taylor & Francis
quality_controlled: '1'
status: public
title: Gyroscopic effects in the structural dynamics of monorail vehicles
type: scientific_journal_article
user_id: '83781'
volume: 63
year: '2025'
...
---
_id: '13084'
abstract:
- lang: eng
text: Thermal preservation is widely used for the stabilization of fruit and vegetable
juices. However, this method can potentially impair product quality and it is
necessary to categorize and quantify these changes in order to optimize the treatment
process. Here, carrot juice was treated with different time temperature combinations
selected to achieve equivalent microbiological lethality. Different temperatures
were selected - low temperature long time (LTLT) with 90 and 95 °C and high temperature
short time (HTST) with 120 and 125 °C. The thermally treated juice exhibited significant
differences in physical, chemical and sensory parameters in contrast to untreated
juice. HTST treatment had less of a negative effect on the juice. A significant
deterioration in odor, appearance and taste was observed after the LTLT treatment
compared to an untreated reference juice. The juice exhibited elevated acid taste,
a shift in olfactory profile from white to red vegetables and diminished homogeneity.
Significant changes in sugar composition, pH, carotenoids and color were also
observed during this treatment. The juice that had been treated with LTLT exhibited
a higher amount of monosaccharides, a lower pH value, a reduced quantity of carotenoids
and a perceptible difference in color in comparison to the untreated and fresh
juice. Therefore, it can be concluded that varying temperatures show different
effects on juice quality, despite the same microbiological lethal effect. This
must be taken into account when designing the pasteurization process.
author:
- first_name: Linda
full_name: Katsch, Linda
id: '71614'
last_name: Katsch
orcid: '0000-0001-6628-3929 '
- first_name: Imke
full_name: Weishaupt, Imke
id: '58425'
last_name: Weishaupt
- first_name: Martina
full_name: Sokolowsky, Martina
id: '76708'
last_name: Sokolowsky
- first_name: Brian R.
full_name: Gibson, Brian R.
last_name: Gibson
- first_name: Jan
full_name: Schneider, Jan
id: '13209'
last_name: Schneider
orcid: 0000-0001-6401-8873
citation:
ama: Katsch L, Weishaupt I, Sokolowsky M, Gibson BR, Schneider J. Impact of equivalent
sterilization processes with different time- temperature combinations on the chemical,
physical and sensory properties of carrot juice. European Food Research and
Technology. 2025;(251):3649-3668. doi:https://doi.org/10.1007/s00217-025-04860-5
apa: Katsch, L., Weishaupt, I., Sokolowsky, M., Gibson, B. R., & Schneider,
J. (2025). Impact of equivalent sterilization processes with different time- temperature
combinations on the chemical, physical and sensory properties of carrot juice.
European Food Research and Technology, 251, 3649–3668. https://doi.org/10.1007/s00217-025-04860-5
bjps: Katsch L et al. (2025) Impact of Equivalent Sterilization Processes
with Different Time- Temperature Combinations on the Chemical, Physical and Sensory
Properties of Carrot Juice. European Food Research and Technology 3649–3668.
chicago: 'Katsch, Linda, Imke Weishaupt, Martina Sokolowsky, Brian R. Gibson, and
Jan Schneider. “Impact of Equivalent Sterilization Processes with Different Time-
Temperature Combinations on the Chemical, Physical and Sensory Properties of Carrot
Juice.” European Food Research and Technology, no. 251 (2025): 3649–68.
https://doi.org/10.1007/s00217-025-04860-5.'
chicago-de: 'Katsch, Linda, Imke Weishaupt, Martina Sokolowsky, Brian R. Gibson
und Jan Schneider. 2025. Impact of equivalent sterilization processes with different
time- temperature combinations on the chemical, physical and sensory properties
of carrot juice. European Food Research and Technology, Nr. 251: 3649–3668.
doi:https://doi.org/10.1007/s00217-025-04860-5,
.'
din1505-2-1: 'Katsch, Linda ; Weishaupt, Imke ; Sokolowsky,
Martina ; Gibson, Brian R.
; Schneider, Jan: Impact of equivalent
sterilization processes with different time- temperature combinations on the chemical,
physical and sensory properties of carrot juice. In: European Food Research
and Technology. Berlin ; Heidelberg, Springer (2025), Nr. 251, S. 3649–3668'
havard: L. Katsch, I. Weishaupt, M. Sokolowsky, B.R. Gibson, J. Schneider, Impact
of equivalent sterilization processes with different time- temperature combinations
on the chemical, physical and sensory properties of carrot juice, European Food
Research and Technology. (2025) 3649–3668.
ieee: 'L. Katsch, I. Weishaupt, M. Sokolowsky, B. R. Gibson, and J. Schneider, “Impact
of equivalent sterilization processes with different time- temperature combinations
on the chemical, physical and sensory properties of carrot juice,” European
Food Research and Technology, no. 251, pp. 3649–3668, 2025, doi: https://doi.org/10.1007/s00217-025-04860-5.'
mla: Katsch, Linda, et al. “Impact of Equivalent Sterilization Processes with Different
Time- Temperature Combinations on the Chemical, Physical and Sensory Properties
of Carrot Juice.” European Food Research and Technology, no. 251, 2025,
pp. 3649–68, https://doi.org/10.1007/s00217-025-04860-5.
short: L. Katsch, I. Weishaupt, M. Sokolowsky, B.R. Gibson, J. Schneider, European
Food Research and Technology (2025) 3649–3668.
ufg: 'Katsch, Linda u. a.: Impact of equivalent sterilization processes with
different time- temperature combinations on the chemical, physical and sensory
properties of carrot juice, in: European Food Research and Technology (2025),
H. 251, S. 3649–3668.'
van: Katsch L, Weishaupt I, Sokolowsky M, Gibson BR, Schneider J. Impact of equivalent
sterilization processes with different time- temperature combinations on the chemical,
physical and sensory properties of carrot juice. European Food Research and Technology.
2025;(251):3649–68.
date_created: 2025-07-25T17:15:07Z
date_updated: 2025-10-29T10:07:41Z
department:
- _id: DEP4023
- _id: DEP4018
doi: https://doi.org/10.1007/s00217-025-04860-5
issue: '251'
keyword:
- Carrot juice
- Sterilization
- Carotenoids
- Descriptive analysis
- PCA
- HTST
language:
- iso: eng
page: 3649-3668
place: Berlin ; Heidelberg
publication: European Food Research and Technology
publication_identifier:
eissn:
- 1438-2385
issn:
- 1438-2377
publication_status: published
publisher: Springer
quality_controlled: '1'
status: public
title: Impact of equivalent sterilization processes with different time- temperature
combinations on the chemical, physical and sensory properties of carrot juice
type: scientific_journal_article
user_id: '83781'
year: '2025'
...
---
_id: '13271'
abstract:
- lang: eng
text: Pasteurization is the prevalent method for stabilizing cloudy apple juice
and prolonging its shelf life, but can also impair quality. Therefore, it is necessary
to investigate and quantify the chemical, physical and sensory effects of this
treatment. In this study, cloudy apple juice was treated at different time-temperature
combinations with equivalent microbial lethality with 161.6 PU. These can be categorized
as low temperature/long time (LTLT with 70°C and 80°C) or high temperature/short
time (HTST with 90°C, 100°C and 105°C) treatments. The results were compared to
those of untreated juice. HTST treatment had significantly less impact on the
juice compared to LTLT treatment. LTLT-treated juices were characterized by different
sensory attributes, such as raisin and caramel odor and bitter taste. In contrast,
the untreated and HTST-treated juices exhibited odors like pear and lemon. There
were also significant differences in turbidity, sugar composition, viscosity and
a heightened 5-(hydroxymethyl)furfural (HMF) content with LTLT treatment. In summary,
HTST-treated juices are more similar to the untreated juices and are rated higher
in terms of quality characteristics. The lowest pasteurization temperature of
70°C results in the greatest deterioration of juice quality. It can be concluded
that different pasteurization conditions showed different effects on juice quality,
despite having the same microbiological lethality of 161.6 PU. Results can be
considered when designing pasteurization processes.
article_number: '101471'
author:
- first_name: Linda
full_name: Katsch, Linda
id: '71614'
last_name: Katsch
orcid: '0000-0001-6628-3929 '
- first_name: Martina
full_name: Sokolowsky, Martina
id: '76708'
last_name: Sokolowsky
- first_name: Brian
full_name: Gibson, Brian
last_name: Gibson
- first_name: Jan
full_name: Schneider, Jan
id: '13209'
last_name: Schneider
orcid: 0000-0001-6401-8873
citation:
ama: Katsch L, Sokolowsky M, Gibson B, Schneider J. Influence of different pasteurization
conditions with equivalent pasteurization units on chemical, physical, and sensory
properties of cloudy apple juice. Applied Food Research. 2025;5(2). doi:10.1016/j.afres.2025.101471
apa: Katsch, L., Sokolowsky, M., Gibson, B., & Schneider, J. (2025). Influence
of different pasteurization conditions with equivalent pasteurization units on
chemical, physical, and sensory properties of cloudy apple juice. Applied Food
Research, 5(2), Article 101471. https://doi.org/10.1016/j.afres.2025.101471
bjps: Katsch L et al. (2025) Influence of Different Pasteurization
Conditions with Equivalent Pasteurization Units on Chemical, Physical, and Sensory
Properties of Cloudy Apple Juice. Applied Food Research 5.
chicago: Katsch, Linda, Martina Sokolowsky, Brian Gibson, and Jan Schneider. “Influence
of Different Pasteurization Conditions with Equivalent Pasteurization Units on
Chemical, Physical, and Sensory Properties of Cloudy Apple Juice.” Applied
Food Research 5, no. 2 (2025). https://doi.org/10.1016/j.afres.2025.101471.
chicago-de: Katsch, Linda, Martina Sokolowsky, Brian Gibson und Jan Schneider. 2025.
Influence of different pasteurization conditions with equivalent pasteurization
units on chemical, physical, and sensory properties of cloudy apple juice. Applied
Food Research 5, Nr. 2. doi:10.1016/j.afres.2025.101471,
.
din1505-2-1: 'Katsch, Linda ; Sokolowsky, Martina ; Gibson,
Brian ; Schneider, Jan: Influence
of different pasteurization conditions with equivalent pasteurization units on
chemical, physical, and sensory properties of cloudy apple juice. In: Applied
Food Research Bd. 5. Amsterdam, Elsevier (2025), Nr. 2'
havard: L. Katsch, M. Sokolowsky, B. Gibson, J. Schneider, Influence of different
pasteurization conditions with equivalent pasteurization units on chemical, physical,
and sensory properties of cloudy apple juice, Applied Food Research. 5 (2025).
ieee: 'L. Katsch, M. Sokolowsky, B. Gibson, and J. Schneider, “Influence of different
pasteurization conditions with equivalent pasteurization units on chemical, physical,
and sensory properties of cloudy apple juice,” Applied Food Research, vol.
5, no. 2, Art. no. 101471, 2025, doi: 10.1016/j.afres.2025.101471.'
mla: Katsch, Linda, et al. “Influence of Different Pasteurization Conditions with
Equivalent Pasteurization Units on Chemical, Physical, and Sensory Properties
of Cloudy Apple Juice.” Applied Food Research, vol. 5, no. 2, 101471, 2025,
https://doi.org/10.1016/j.afres.2025.101471.
short: L. Katsch, M. Sokolowsky, B. Gibson, J. Schneider, Applied Food Research
5 (2025).
ufg: 'Katsch, Linda u. a.: Influence of different pasteurization conditions
with equivalent pasteurization units on chemical, physical, and sensory properties
of cloudy apple juice, in: Applied Food Research 5 (2025), H. 2.'
van: Katsch L, Sokolowsky M, Gibson B, Schneider J. Influence of different pasteurization
conditions with equivalent pasteurization units on chemical, physical, and sensory
properties of cloudy apple juice. Applied Food Research. 2025;5(2).
date_created: 2025-10-27T16:10:29Z
date_updated: 2025-11-05T08:17:40Z
department:
- _id: DEP4023
- _id: DEP4018
doi: 10.1016/j.afres.2025.101471
intvolume: ' 5'
issue: '2'
keyword:
- Cloudy apple juice
- HTST
- juice pasteurization
- sensory analysis
- process optimization
- equivalent microbial lethality
language:
- iso: eng
place: Amsterdam
publication: Applied Food Research
publication_identifier:
eissn:
- 2772-5022
publication_status: published
publisher: Elsevier
quality_controlled: '1'
status: public
title: Influence of different pasteurization conditions with equivalent pasteurization
units on chemical, physical, and sensory properties of cloudy apple juice
type: scientific_journal_article
user_id: '83781'
volume: 5
year: '2025'
...
---
_id: '11495'
abstract:
- lang: eng
text: 'To evaluate the suitability of an analytical instrument, essential figures
of merit such as the limit of detection (LOD) and the limit of quantification
(LOQ) can be employed. However, as the definitions k nown in the literature are
mostly applicable to one signal per sample, estimating the LOD for substances
with instruments yielding multidimensional results like electronic noses (eNoses)
is still challenging. In this paper, we will compare and present different approaches
to estimate the LOD for eNoses by employing commonly used multivariate data analysis
and regression techniques, including principal component analysis (PCA), principal
component regression (PCR), as well as partial least squares regression (PLSR).
These methods could subsequently be used to assess the suitability of eNoses to
help control and steer processes where volatiles are key process parameters. As
a use case, we determined the LODs for key compounds involved in beer maturation,
namely acetaldehyde, diacetyl, dimethyl sulfide, ethyl acetate, isobutanol, and
2-phenylethanol, and discussed the suitability of our eNose for that dertermination
process. The results of the methods performed demonstrated differences of up to
a factor of eight. For diacetyl, the LOD and the LOQ were sufficiently low to
suggest potential for monitoring via eNose. '
article_number: '3520'
article_type: original
author:
- first_name: Julia
full_name: Kruse, Julia
id: '82298'
last_name: Kruse
- first_name: Julius
full_name: Wörner, Julius
id: '79011'
last_name: Wörner
- first_name: Jan
full_name: Schneider, Jan
id: '13209'
last_name: Schneider
orcid: 0000-0001-6401-8873
- first_name: Helene
full_name: Dörksen, Helene
id: '46416'
last_name: Dörksen
- first_name: Miriam
full_name: Pein-Hackelbusch, Miriam
id: '64952'
last_name: Pein-Hackelbusch
orcid: 0000-0002-7920-0595
citation:
ama: Kruse J, Wörner J, Schneider J, Dörksen H, Pein-Hackelbusch M. Methods for
Estimating the Detection and Quantification Limits of Key Substances in Beer Maturation
with Electronic Noses . Sensors. 2024;24(11). doi:10.3390/s24113520
apa: Kruse, J., Wörner, J., Schneider, J., Dörksen, H., & Pein-Hackelbusch,
M. (2024). Methods for Estimating the Detection and Quantification Limits of Key
Substances in Beer Maturation with Electronic Noses . Sensors, 24(11),
Article 3520. https://doi.org/10.3390/s24113520
bjps: Kruse J et al. (2024) Methods for Estimating the Detection and
Quantification Limits of Key Substances in Beer Maturation with Electronic Noses
. Sensors 24.
chicago: Kruse, Julia, Julius Wörner, Jan Schneider, Helene Dörksen, and Miriam
Pein-Hackelbusch. “Methods for Estimating the Detection and Quantification Limits
of Key Substances in Beer Maturation with Electronic Noses .” Sensors 24,
no. 11 (2024). https://doi.org/10.3390/s24113520.
chicago-de: Kruse, Julia, Julius Wörner, Jan Schneider, Helene Dörksen und Miriam
Pein-Hackelbusch. 2024. Methods for Estimating the Detection and Quantification
Limits of Key Substances in Beer Maturation with Electronic Noses . Sensors
24, Nr. 11. doi:10.3390/s24113520,
.
din1505-2-1: 'Kruse, Julia ; Wörner, Julius ; Schneider,
Jan ; Dörksen, Helene ; Pein-Hackelbusch, Miriam: Methods for
Estimating the Detection and Quantification Limits of Key Substances in Beer Maturation
with Electronic Noses . In: Sensors Bd. 24, MDPI (2024), Nr. 11'
havard: J. Kruse, J. Wörner, J. Schneider, H. Dörksen, M. Pein-Hackelbusch, Methods
for Estimating the Detection and Quantification Limits of Key Substances in Beer
Maturation with Electronic Noses , Sensors. 24 (2024).
ieee: 'J. Kruse, J. Wörner, J. Schneider, H. Dörksen, and M. Pein-Hackelbusch, “Methods
for Estimating the Detection and Quantification Limits of Key Substances in Beer
Maturation with Electronic Noses ,” Sensors, vol. 24, no. 11, Art. no.
3520, 2024, doi: 10.3390/s24113520.'
mla: Kruse, Julia, et al. “Methods for Estimating the Detection and Quantification
Limits of Key Substances in Beer Maturation with Electronic Noses .” Sensors,
vol. 24, no. 11, 3520, 2024, https://doi.org/10.3390/s24113520.
short: J. Kruse, J. Wörner, J. Schneider, H. Dörksen, M. Pein-Hackelbusch, Sensors
24 (2024).
ufg: 'Kruse, Julia u. a.: Methods for Estimating the Detection and Quantification
Limits of Key Substances in Beer Maturation with Electronic Noses , in: Sensors
24 (2024), H. 11.'
van: Kruse J, Wörner J, Schneider J, Dörksen H, Pein-Hackelbusch M. Methods for
Estimating the Detection and Quantification Limits of Key Substances in Beer Maturation
with Electronic Noses . Sensors. 2024;24(11).
date_created: 2024-06-03T07:43:48Z
date_updated: 2025-06-25T13:00:14Z
department:
- _id: DEP4028
doi: 10.3390/s24113520
external_id:
isi:
- '001245424000001'
pmid:
- '38894312'
intvolume: ' 24'
isi: '1'
issue: '11'
keyword:
- multidimensional sensor arrays
- MOS sensors
- beer fermentation
- process control
- gas analysis
- metal oxide semiconductors
- intentional data analysis
- chemometrics
- PLSR
- PCA
- first-order calibration
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.mdpi.com/1424-8220/24/11/3520
oa: '1'
pmid: '1'
publication: Sensors
publication_identifier:
issn:
- '1424-8220 '
publication_status: published
publisher: MDPI
quality_controlled: '1'
status: public
title: 'Methods for Estimating the Detection and Quantification Limits of Key Substances
in Beer Maturation with Electronic Noses '
type: scientific_journal_article
user_id: '83781'
volume: 24
year: '2024'
...
---
_id: '12022'
author:
- first_name: Mario
full_name: Luttmann, Mario
id: '68637'
last_name: Luttmann
- first_name: André
full_name: Blome, André
id: '62117'
last_name: Blome
- first_name: Jan
full_name: Segermann, Jan
id: '81965'
last_name: Segermann
- first_name: Mario
full_name: Jekle, Mario
last_name: Jekle
- first_name: Björn
full_name: Frahm, Björn
id: '45666'
last_name: Frahm
- first_name: Ulrich
full_name: Müller, Ulrich
id: '12119'
last_name: Müller
citation:
ama: Luttmann M, Blome A, Segermann J, Jekle M, Frahm B, Müller U. Erkenntnisse
zur Nutzung von Photogrammmetrie für die Untersuchung des Bräunungsverhaltens
von Weizenbrötchen.; 2024.
apa: Luttmann, M., Blome, A., Segermann, J., Jekle, M., Frahm, B., & Müller,
U. (2024). Erkenntnisse zur Nutzung von Photogrammmetrie für die Untersuchung
des Bräunungsverhaltens von Weizenbrötchen. 10. GDL Kongress Lebensmitteltechnologie
2024, Lemgo.
bjps: Luttmann M et al. (2024) Erkenntnisse zur Nutzung von Photogrammmetrie
für die Untersuchung des Bräunungsverhaltens von Weizenbrötchen. .
chicago: Luttmann, Mario, André Blome, Jan Segermann, Mario Jekle, Björn Frahm,
and Ulrich Müller. Erkenntnisse zur Nutzung von Photogrammmetrie für die Untersuchung
des Bräunungsverhaltens von Weizenbrötchen, 2024.
chicago-de: Luttmann, Mario, André Blome, Jan Segermann, Mario Jekle, Björn Frahm
und Ulrich Müller. 2024. Erkenntnisse zur Nutzung von Photogrammmetrie für
die Untersuchung des Bräunungsverhaltens von Weizenbrötchen.
din1505-2-1: 'Luttmann, Mario ; Blome, André ; Segermann,
Jan ; Jekle, Mario ; Frahm, Björn ; Müller,
Ulrich: Erkenntnisse zur Nutzung von Photogrammmetrie für die Untersuchung
des Bräunungsverhaltens von Weizenbrötchen, 2024'
havard: M. Luttmann, A. Blome, J. Segermann, M. Jekle, B. Frahm, U. Müller, Erkenntnisse
zur Nutzung von Photogrammmetrie für die Untersuchung des Bräunungsverhaltens
von Weizenbrötchen, 2024.
ieee: M. Luttmann, A. Blome, J. Segermann, M. Jekle, B. Frahm, and U. Müller, Erkenntnisse
zur Nutzung von Photogrammmetrie für die Untersuchung des Bräunungsverhaltens
von Weizenbrötchen. 2024.
mla: Luttmann, Mario, et al. Erkenntnisse zur Nutzung von Photogrammmetrie für
die Untersuchung des Bräunungsverhaltens von Weizenbrötchen. 2024.
short: M. Luttmann, A. Blome, J. Segermann, M. Jekle, B. Frahm, U. Müller, Erkenntnisse
zur Nutzung von Photogrammmetrie für die Untersuchung des Bräunungsverhaltens
von Weizenbrötchen, 2024.
ufg: 'Luttmann, Mario u. a.: Erkenntnisse zur Nutzung von Photogrammmetrie
für die Untersuchung des Bräunungsverhaltens von Weizenbrötchen, o. O. 2024.'
van: Luttmann M, Blome A, Segermann J, Jekle M, Frahm B, Müller U. Erkenntnisse
zur Nutzung von Photogrammmetrie für die Untersuchung des Bräunungsverhaltens
von Weizenbrötchen. 2024.
conference:
end_date: 2024-10-12
location: Lemgo
name: 10. GDL Kongress Lebensmitteltechnologie 2024
start_date: 2024-10-10
date_created: 2024-11-06T17:00:49Z
date_updated: 2025-10-17T18:22:58Z
department:
- _id: DEP4000
- _id: DEP5023
- _id: DEP4028
- _id: DEP1308
keyword:
- colorimetry
- photogrammetry
- wheat rolls
- crust colour
- 3D analysis
language:
- iso: ger
publication_status: published
status: public
title: Erkenntnisse zur Nutzung von Photogrammmetrie für die Untersuchung des Bräunungsverhaltens
von Weizenbrötchen
type: conference_speech
user_id: '81304'
year: '2024'
...
---
_id: '12697'
abstract:
- lang: eng
text: The automotive industry is extremely important in Germany and its OEMs and
suppliers are still globally competitive. However, the shift from combustion engines
to e-mobility drive trains is restructuring the industry. Accordingly, this paper
analyzes the determinants affecting the emergence of e-mobility drive technologies
in the automotive sector. In doing so, we emphasize the role of digital technologies
in the sector’s environmental transformation, drawing from the “twin-transition”
framework, where digital and green shifts mutually influence one another. Methodically,
we use an event-history approach to empirically explore the early appearance of
R&D activities in the form of patent-based or funded-project-based collaboration
events at the regional level over the period 1990 to 2018. Our results indicate
positive and significant relatedness between various digitalization variables
and the early emergence of e-mobility activities in regions. At the same time,
the geographical context appears to be only of marginal importance.
alternative_title:
- Exploring the Initial Appearance of Patent-Based and Funded-Project-Based Collaboration
Events
article_type: original
author:
- first_name: Patrick
full_name: Wolf, Patrick
last_name: Wolf
- first_name: Muhamed
full_name: Kudic, Muhamed
id: '87331'
last_name: Kudic
- first_name: Tobias
full_name: Buchmann, Tobias
last_name: Buchmann
citation:
ama: Wolf P, Kudic M, Buchmann T. Digitalization and the Emergence of E-Mobility
Technology in German Regions. Journal of Innovation Economics & Management.
2024;45(3):95-122. doi:10.3917/jie.pr1.0170
apa: Wolf, P., Kudic, M., & Buchmann, T. (2024). Digitalization and the Emergence
of E-Mobility Technology in German Regions. Journal of Innovation Economics
& Management, 45(3), 95–122. https://doi.org/10.3917/jie.pr1.0170
bjps: Wolf P, Kudic M and Buchmann T (2024) Digitalization and the Emergence
of E-Mobility Technology in German Regions. Journal of Innovation Economics
& Management 45, 95–122.
chicago: 'Wolf, Patrick, Muhamed Kudic, and Tobias Buchmann. “Digitalization and
the Emergence of E-Mobility Technology in German Regions.” Journal of Innovation
Economics & Management 45, no. 3 (2024): 95–122. https://doi.org/10.3917/jie.pr1.0170.'
chicago-de: 'Wolf, Patrick, Muhamed Kudic und Tobias Buchmann. 2024. Digitalization
and the Emergence of E-Mobility Technology in German Regions. Journal of Innovation
Economics & Management 45, Nr. 3: 95–122. doi:10.3917/jie.pr1.0170,
.'
din1505-2-1: 'Wolf, Patrick ; Kudic, Muhamed ; Buchmann,
Tobias: Digitalization and the Emergence of E-Mobility Technology in German
Regions. In: Journal of Innovation Economics & Management Bd. 45. Paris
[u.a.], De Boeck Université (2024), Nr. 3, S. 95–122'
havard: P. Wolf, M. Kudic, T. Buchmann, Digitalization and the Emergence of E-Mobility
Technology in German Regions, Journal of Innovation Economics & Management.
45 (2024) 95–122.
ieee: 'P. Wolf, M. Kudic, and T. Buchmann, “Digitalization and the Emergence of
E-Mobility Technology in German Regions,” Journal of Innovation Economics &
Management, vol. 45, no. 3, pp. 95–122, 2024, doi: 10.3917/jie.pr1.0170.'
mla: Wolf, Patrick, et al. “Digitalization and the Emergence of E-Mobility Technology
in German Regions.” Journal of Innovation Economics & Management, vol.
45, no. 3, 2024, pp. 95–122, https://doi.org/10.3917/jie.pr1.0170.
short: P. Wolf, M. Kudic, T. Buchmann, Journal of Innovation Economics & Management
45 (2024) 95–122.
ufg: 'Wolf, Patrick/Kudic, Muhamed/Buchmann, Tobias: Digitalization and the
Emergence of E-Mobility Technology in German Regions, in: Journal of Innovation
Economics & Management 45 (2024), H. 3, S. 95–122.'
van: Wolf P, Kudic M, Buchmann T. Digitalization and the Emergence of E-Mobility
Technology in German Regions. Journal of Innovation Economics & Management.
2024;45(3):95–122.
date_created: 2025-03-12T07:58:41Z
date_updated: 2025-03-14T07:53:45Z
department:
- _id: DEP5032
- _id: DEP5000
doi: 10.3917/jie.pr1.0170
intvolume: ' 45'
issue: '3'
jel:
- O33
keyword:
- Twin-Transition
- Sustainable Transition
- E-Mobility Regional Transition
- Event History Analysis
- R&D Collaboration
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://shs.cairn.info/journal-of-innovation-economics-2024-3-page-95?lang=en
oa: '1'
page: 95-122
place: Paris [u.a.]
publication: Journal of Innovation Economics & Management
publication_identifier:
issn:
- 2032-5355
publication_status: published
publisher: 'De Boeck Université '
quality_controlled: '1'
status: public
title: Digitalization and the Emergence of E-Mobility Technology in German Regions
type: scientific_journal_article
user_id: '83781'
volume: 45
year: '2024'
...
---
_id: '12851'
abstract:
- lang: eng
text: Currently, numerous single-track railway lines are disused due to economic
reasons. They could be reactivated by small vehicles that use only one rail and
thus can be operated in both directions at the same time. MONOCABs are such small
cabin-like vehicles, stabilized by a system of control moment gyroscopes and a
trim mass. They could make an important contribution to improve the mobility offer
especially in rural areas. Regarding the MONOCAB, there is currently no reference
in comparison with other vehicles. In the context of mechanical design and construction,
interdependencies with vertical stabilization occur. Torsional effects in particular
can critically affect the stability. This paper investigates the influence of
mechanical eigenmodes on the vertical stabilization system. Specific characteristics
of the system (especially due to the gyroscopes) are highlighted by a model-based
analysis. Moreover, a FEM modal analysis is used to examine the supporting frame
of the vehicle. The results are compared to experimentally estimated frequency
responses of a full-scale monorail vehicle.
author:
- first_name: Martin
full_name: Griese, Martin
id: '52308'
last_name: Griese
- first_name: Patrick
full_name: Döding, Patrick
last_name: Döding
- first_name: Thomas
full_name: Schulte, Thomas
id: '46242'
last_name: Schulte
citation:
ama: Griese M, Döding P, Schulte T. Analysis of Mechanical Eigenmodes of a Self-Stabilizing
Monorail Vehicle. (Huang W, Ahmadian M, eds.). Springer Nature Switzerland;
2024:107-116. doi:10.1007/978-3-031-66971-2_12
apa: 'Griese, M., Döding, P., & Schulte, T. (2024). Analysis of Mechanical Eigenmodes
of a Self-stabilizing Monorail Vehicle. In W. Huang & M. Ahmadian (Eds.),
Advances in Dynamics of Vehicles on Roads and Tracks III : Proceedings of the
28th Symposium of the International Association of Vehicle System Dynamics, IAVSD
2023, August 21–25, 2023, Ottawa, Canada - Volume 1: Rail Vehicles (pp. 107–116).
Springer Nature Switzerland. https://doi.org/10.1007/978-3-031-66971-2_12'
bjps: 'Griese M, Döding P and Schulte T (2024) Analysis of Mechanical
Eigenmodes of a Self-Stabilizing Monorail Vehicle, Huang W and Ahmadian M
(eds). Cham: Springer Nature Switzerland.'
chicago: 'Griese, Martin, Patrick Döding, and Thomas Schulte. Analysis of Mechanical
Eigenmodes of a Self-Stabilizing Monorail Vehicle. Edited by Wei Huang and
Mehdi Ahmadian. Advances in Dynamics of Vehicles on Roads and Tracks III :
Proceedings of the 28th Symposium of the International Association of Vehicle
System Dynamics, IAVSD 2023, August 21–25, 2023, Ottawa, Canada - Volume 1: Rail
Vehicles . Lecture Notes in Mechanical Engineering ((LNME)). Cham: Springer
Nature Switzerland, 2024. https://doi.org/10.1007/978-3-031-66971-2_12.'
chicago-de: 'Griese, Martin, Patrick Döding und Thomas Schulte. 2024. Analysis
of Mechanical Eigenmodes of a Self-stabilizing Monorail Vehicle. Hg. von Wei Huang
und Mehdi Ahmadian. Advances in Dynamics of Vehicles on Roads and Tracks III :
Proceedings of the 28th Symposium of the International Association of Vehicle
System Dynamics, IAVSD 2023, August 21–25, 2023, Ottawa, Canada - Volume 1: Rail
Vehicles . Lecture Notes in Mechanical Engineering ((LNME)). Cham: Springer
Nature Switzerland. doi:10.1007/978-3-031-66971-2_12,
.'
din1505-2-1: 'Griese, Martin ; Döding, Patrick ; Schulte,
Thomas ; Huang, W. ; Ahmadian, M. (Hrsg.): Analysis of Mechanical
Eigenmodes of a Self-stabilizing Monorail Vehicle, Lecture Notes in Mechanical
Engineering ((LNME)). Cham : Springer Nature Switzerland, 2024'
havard: M. Griese, P. Döding, T. Schulte, Analysis of Mechanical Eigenmodes of a Self-stabilizing
Monorail Vehicle, Springer Nature Switzerland, Cham, 2024.
ieee: 'M. Griese, P. Döding, and T. Schulte, Analysis of Mechanical Eigenmodes
of a Self-stabilizing Monorail Vehicle. Cham: Springer Nature Switzerland,
2024, pp. 107–116. doi: 10.1007/978-3-031-66971-2_12.'
mla: 'Griese, Martin, et al. “Analysis of Mechanical Eigenmodes of a Self-Stabilizing
Monorail Vehicle.” Advances in Dynamics of Vehicles on Roads and Tracks III :
Proceedings of the 28th Symposium of the International Association of Vehicle
System Dynamics, IAVSD 2023, August 21–25, 2023, Ottawa, Canada - Volume 1: Rail
Vehicles , edited by Wei Huang and Mehdi Ahmadian, Springer Nature Switzerland,
2024, pp. 107–16, https://doi.org/10.1007/978-3-031-66971-2_12.'
short: M. Griese, P. Döding, T. Schulte, Analysis of Mechanical Eigenmodes of a Self-Stabilizing
Monorail Vehicle, Springer Nature Switzerland, Cham, 2024.
ufg: 'Griese, Martin/Döding, Patrick/Schulte, Thomas: Analysis of Mechanical
Eigenmodes of a Self-stabilizing Monorail Vehicle, hg. von Huang, Wei/Ahmadian,
Mehdi, Cham 2024 (Lecture Notes in Mechanical Engineering ((LNME))).'
van: 'Griese M, Döding P, Schulte T. Analysis of Mechanical Eigenmodes of a Self-stabilizing
Monorail Vehicle. Huang W, Ahmadian M, editors. Advances in Dynamics of Vehicles
on Roads and Tracks III : Proceedings of the 28th Symposium of the International
Association of Vehicle System Dynamics, IAVSD 2023, August 21–25, 2023, Ottawa,
Canada - Volume 1: Rail Vehicles . Cham: Springer Nature Switzerland; 2024. (Lecture
Notes in Mechanical Engineering ((LNME))).'
conference:
end_date: 2023-08-25
location: Ottawa, CANADA
name: 28th Symposium of the International Association of Vehicle System Dynamics
start_date: 2023-08-21
date_created: 2025-04-24T06:12:35Z
date_updated: 2025-06-25T07:41:17Z
department:
- _id: DEP5023
doi: 10.1007/978-3-031-66971-2_12
editor:
- first_name: 'Wei '
full_name: 'Huang, Wei '
last_name: Huang
- first_name: 'Mehdi '
full_name: 'Ahmadian, Mehdi '
last_name: Ahmadian
keyword:
- vehicle dynamics
- roll stabilization
- modal analysis
language:
- iso: eng
page: 107-116
place: Cham
publication: 'Advances in Dynamics of Vehicles on Roads and Tracks III : Proceedings
of the 28th Symposium of the International Association of Vehicle System Dynamics,
IAVSD 2023, August 21–25, 2023, Ottawa, Canada - Volume 1: Rail Vehicles '
publication_identifier:
eisbn:
- 978-3-031-66971-2
eissn:
- 2195-4364
isbn:
- 978-3-031-66970-5
issn:
- 2195-4356
publication_status: published
publisher: Springer Nature Switzerland
series_title: Lecture Notes in Mechanical Engineering ((LNME))
status: public
title: Analysis of Mechanical Eigenmodes of a Self-stabilizing Monorail Vehicle
type: conference_editor_article
user_id: '83781'
year: '2024'
...
---
_id: '12993'
abstract:
- lang: eng
text: In computer science and related technical fields, researchers, educators,
and practitioners are continuously automating recurring tasks for high efficiency
in a wide variety of fields. In higher education, such tasks that educators face
are the recurring review and assessment process of students' programming coursework.
Thus, various attempts exist to automate the assessment and feedback generation
for course homework and practicals in higher education. Those approaches for automated
programming task assessment often comprise running automated tests to check for
limited functional correctness and potentially style checking for various violations
(LINTing). Educators familiar with large-scale automated task assessment are likely
used to seeing hard-coded solutions specifically or accidentally designed to just
pass the required tests, ignoring or misinterpreting the actual task requirements.
Detecting such issues in arbitrary code is non-trivial and an ongoing research
topic in software engineering. Software engineering research has yielded various
semantic analysis frameworks, such as GitHub's CodeQL, which can be adapted for
programming task assessment. We present a work-in-progress programming task analysis
framework which employs CodeQL's analysis technology to identify the actual use
of task-description-mandated syntactic and semantic elements such as loop structures
or the use of mandated data blocks in branching conditions. This allows extending
existing course work analysis frameworks to include a semantic check of an uploaded
program which exceeds the relatively simple set of input-output test cases provided
by unit tests. We use a running example of entry level programming tasks and several
solution attempts to introduce and explain our proposed control flow and data
flow -based analysis method. We discuss the benefits of including semantic analysis
as an additional method in the automated programming task assessment toolbox.
Our main contribution is the adaptation of an semantic analysis code framework
to analyse syntactic and semantic components in students' programming coursework.
author:
- first_name: Leon
full_name: Wehmeier, Leon
id: '81257'
last_name: Wehmeier
- first_name: Sebastian
full_name: Eilermann, Sebastian
last_name: Eilermann
- first_name: Oliver
full_name: Niggemann, Oliver
id: '10876'
last_name: Niggemann
- first_name: Andreas
full_name: Deuter, Andreas
id: '62088'
last_name: Deuter
orcid: 0000-0002-6529-6215
citation:
ama: Wehmeier L, Eilermann S, Niggemann O, Deuter A. Task-Fidelity Assessment
for Programming Tasks Using Semantic Code Analysis. (IEEE ASEE Frontiers in
Education Conference, Institute of Electrical and Electronics Engineers, American
Society for Engineering Education, eds.). IEEE; 2024. doi:10.1109/fie58773.2023.10342916
apa: 'Wehmeier, L., Eilermann, S., Niggemann, O., & Deuter, A. (2024). Task-fidelity
Assessment for Programming Tasks Using Semantic Code Analysis. In IEEE ASEE Frontiers
in Education Conference, Institute of Electrical and Electronics Engineers, &
American Society for Engineering Education (Eds.), FIE 2023 : College Station,
TX, USA, October 18-21, 2023 : conference proceedings / 2023 IEEE Frontiers in
Education Conference (FIE). IEEE. https://doi.org/10.1109/fie58773.2023.10342916'
bjps: 'Wehmeier L et al. (2024) Task-Fidelity Assessment for Programming
Tasks Using Semantic Code Analysis, IEEE ASEE Frontiers in Education Conference,
Institute of Electrical and Electronics Engineers, and American Society for Engineering
Education (eds). [Piscataway, NJ]: IEEE.'
chicago: 'Wehmeier, Leon, Sebastian Eilermann, Oliver Niggemann, and Andreas Deuter.
Task-Fidelity Assessment for Programming Tasks Using Semantic Code Analysis.
Edited by IEEE ASEE Frontiers in Education Conference, Institute of Electrical
and Electronics Engineers, and American Society for Engineering Education. FIE
2023 : College Station, TX, USA, October 18-21, 2023 : Conference Proceedings
/ 2023 IEEE Frontiers in Education Conference (FIE). [Piscataway, NJ]: IEEE,
2024. https://doi.org/10.1109/fie58773.2023.10342916.'
chicago-de: 'Wehmeier, Leon, Sebastian Eilermann, Oliver Niggemann und Andreas Deuter.
2024. Task-fidelity Assessment for Programming Tasks Using Semantic Code Analysis.
Hg. von IEEE ASEE Frontiers in Education Conference, Institute of Electrical and
Electronics Engineers, und American Society for Engineering Education. FIE
2023 : College Station, TX, USA, October 18-21, 2023 : conference proceedings
/ 2023 IEEE Frontiers in Education Conference (FIE). [Piscataway, NJ]: IEEE.
doi:10.1109/fie58773.2023.10342916,
.'
din1505-2-1: 'Wehmeier, Leon ; Eilermann, Sebastian ; Niggemann,
Oliver ; Deuter, Andreas
; IEEE ASEE Frontiers in Education Conference
; Institute of Electrical and Electronics
Engineers ; American Society for
Engineering Education (Hrsg.): Task-fidelity Assessment for Programming
Tasks Using Semantic Code Analysis. [Piscataway, NJ] : IEEE, 2024'
havard: L. Wehmeier, S. Eilermann, O. Niggemann, A. Deuter, Task-fidelity Assessment
for Programming Tasks Using Semantic Code Analysis, IEEE, [Piscataway, NJ], 2024.
ieee: 'L. Wehmeier, S. Eilermann, O. Niggemann, and A. Deuter, Task-fidelity
Assessment for Programming Tasks Using Semantic Code Analysis. [Piscataway,
NJ]: IEEE, 2024. doi: 10.1109/fie58773.2023.10342916.'
mla: 'Wehmeier, Leon, et al. “Task-Fidelity Assessment for Programming Tasks Using
Semantic Code Analysis.” FIE 2023 : College Station, TX, USA, October 18-21,
2023 : Conference Proceedings / 2023 IEEE Frontiers in Education Conference (FIE),
edited by IEEE ASEE Frontiers in Education Conference et al., IEEE, 2024, https://doi.org/10.1109/fie58773.2023.10342916.'
short: L. Wehmeier, S. Eilermann, O. Niggemann, A. Deuter, Task-Fidelity Assessment
for Programming Tasks Using Semantic Code Analysis, IEEE, [Piscataway, NJ], 2024.
ufg: 'Wehmeier, Leon u. a.: Task-fidelity Assessment for Programming Tasks
Using Semantic Code Analysis, hg. von IEEE ASEE Frontiers in Education Conference/Institute
of Electrical and Electronics Engineers, American Society for Engineering Education,
[Piscataway, NJ] 2024.'
van: 'Wehmeier L, Eilermann S, Niggemann O, Deuter A. Task-fidelity Assessment for
Programming Tasks Using Semantic Code Analysis. IEEE ASEE Frontiers in Education
Conference, Institute of Electrical and Electronics Engineers, American Society
for Engineering Education, editors. FIE 2023 : College Station, TX, USA, October
18-21, 2023 : conference proceedings / 2023 IEEE Frontiers in Education Conference
(FIE). [Piscataway, NJ]: IEEE; 2024.'
conference:
end_date: 2023-10-21
location: Texas
name: 2023 IEEE Frontiers in Education Conference (FIE)
start_date: 2023-10-18
corporate_editor:
- IEEE ASEE Frontiers in Education Conference
- Institute of Electrical and Electronics Engineers
- American Society for Engineering Education
date_created: 2025-06-18T13:05:11Z
date_updated: 2025-06-18T13:23:56Z
department:
- _id: DEP7022
- _id: DEP1306
- _id: DEP7001
doi: 10.1109/fie58773.2023.10342916
keyword:
- Codes
- Electronic learning
- Soft sensors
- Semantics
- Education
- Syntactics
- Task analysis
language:
- iso: eng
place: '[Piscataway, NJ]'
publication: 'FIE 2023 : College Station, TX, USA, October 18-21, 2023 : conference
proceedings / 2023 IEEE Frontiers in Education Conference (FIE)'
publication_identifier:
eisbn:
- 979-8-3503-3642-9
isbn:
- 979-8-3503-3643-6
publication_status: published
publisher: IEEE
status: public
title: Task-fidelity Assessment for Programming Tasks Using Semantic Code Analysis
type: conference_editor_article
user_id: '83781'
year: '2024'
...
---
_id: '13607'
abstract:
- lang: eng
text: "Background\r\nPrevious investigations on the Eating Disorder Examination-Questionnaire
(EDE-Q) factor structures in men have been restricted to non-clinical settings,
limiting conclusions about the factorial validity in men with eating disorders
(ED). This study aimed to examine the factor structure of the German EDE-Q in
a clinical group of adult men with diagnosed ED.\r\nMethods\r\nED symptoms were
assessed using the validated German version of the EDE-Q. Exploratory factor analysis
(EFA) using principal-axis factoring based on polychoric correlations was conducted
for the full sample (N = 188) using Varimax-Rotation with Kaiser-Normalization.\r\nResults\r\nHorn’s
parallel analysis suggested a five-factor solution with an explained variance
of 68%. The EFA factors were labeled “Restraint” (items 1, 3–6), “Body Dissatisfaction”
(items 25–28), “Weight Concern” (items 10–12, 20), “Preoccupation” (items 7 and
8), and “Importance” (items 22 and 23). Items 2, 9, 19, 21, and 24 were excluded
due to low communalities.\r\nConclusions\r\nFactors associated with body concerns
and body dissatisfaction in adult men with ED are not fully represented in the
EDE-Q. This could be due to differences in body ideals in men, e.g., the underestimation
of the role of concerns about musculature. Consequently, it may be useful to apply
the 17-item five-factor structure of the EDE-Q presented here to adult men with
diagnosed ED."
article_number: '34'
author:
- first_name: Nora M.
full_name: Laskowski, Nora M.
last_name: Laskowski
- first_name: Georg
full_name: Halbeisen, Georg
id: '85780'
last_name: Halbeisen
orcid: 0000-0002-9529-2215
- first_name: Karsten
full_name: Braks, Karsten
last_name: Braks
- first_name: Thomas J.J.
full_name: Huber, Thomas J.J.
last_name: Huber
- first_name: Georgios
full_name: Paslakis, Georgios
last_name: Paslakis
citation:
ama: Laskowski NM, Halbeisen G, Braks K, Huber TJJ, Paslakis G. Factor structure
of the Eating Disorder Examination-Questionnaire (EDE-Q) in adult men with eating
disorders. Journal of Eating Disorders. 2023;11(1). doi:10.1186/s40337-023-00757-4
apa: Laskowski, N. M., Halbeisen, G., Braks, K., Huber, T. J. J., & Paslakis,
G. (2023). Factor structure of the Eating Disorder Examination-Questionnaire (EDE-Q)
in adult men with eating disorders. Journal of Eating Disorders, 11(1),
Article 34. https://doi.org/10.1186/s40337-023-00757-4
bjps: Laskowski NM et al. (2023) Factor Structure of the Eating Disorder
Examination-Questionnaire (EDE-Q) in Adult Men with Eating Disorders. Journal
of Eating Disorders 11.
chicago: Laskowski, Nora M., Georg Halbeisen, Karsten Braks, Thomas J.J. Huber,
and Georgios Paslakis. “Factor Structure of the Eating Disorder Examination-Questionnaire
(EDE-Q) in Adult Men with Eating Disorders.” Journal of Eating Disorders
11, no. 1 (2023). https://doi.org/10.1186/s40337-023-00757-4.
chicago-de: Laskowski, Nora M., Georg Halbeisen, Karsten Braks, Thomas J.J. Huber
und Georgios Paslakis. 2023. Factor structure of the Eating Disorder Examination-Questionnaire
(EDE-Q) in adult men with eating disorders. Journal of Eating Disorders
11, Nr. 1. doi:10.1186/s40337-023-00757-4,
.
din1505-2-1: 'Laskowski, Nora M. ;
Halbeisen, Georg ; Braks,
Karsten ; Huber, Thomas J.J.
; Paslakis, Georgios: Factor structure
of the Eating Disorder Examination-Questionnaire (EDE-Q) in adult men with eating
disorders. In: Journal of Eating Disorders Bd. 11. London, BioMed Central
(2023), Nr. 1'
havard: N.M. Laskowski, G. Halbeisen, K. Braks, T.J.J. Huber, G. Paslakis, Factor
structure of the Eating Disorder Examination-Questionnaire (EDE-Q) in adult men
with eating disorders, Journal of Eating Disorders. 11 (2023).
ieee: 'N. M. Laskowski, G. Halbeisen, K. Braks, T. J. J. Huber, and G. Paslakis,
“Factor structure of the Eating Disorder Examination-Questionnaire (EDE-Q) in
adult men with eating disorders,” Journal of Eating Disorders, vol. 11,
no. 1, Art. no. 34, 2023, doi: 10.1186/s40337-023-00757-4.'
mla: Laskowski, Nora M., et al. “Factor Structure of the Eating Disorder Examination-Questionnaire
(EDE-Q) in Adult Men with Eating Disorders.” Journal of Eating Disorders,
vol. 11, no. 1, 34, 2023, https://doi.org/10.1186/s40337-023-00757-4.
short: N.M. Laskowski, G. Halbeisen, K. Braks, T.J.J. Huber, G. Paslakis, Journal
of Eating Disorders 11 (2023).
ufg: 'Laskowski, Nora M. u. a.: Factor structure of the Eating Disorder Examination-Questionnaire
(EDE-Q) in adult men with eating disorders, in: Journal of Eating Disorders
11 (2023), H. 1.'
van: Laskowski NM, Halbeisen G, Braks K, Huber TJJ, Paslakis G. Factor structure
of the Eating Disorder Examination-Questionnaire (EDE-Q) in adult men with eating
disorders. Journal of Eating Disorders. 2023;11(1).
date_created: 2026-03-25T13:36:30Z
date_updated: 2026-04-08T12:36:59Z
department:
- _id: DEP1500
doi: 10.1186/s40337-023-00757-4
external_id:
isi:
- '000943959600001'
pmid:
- '36879335'
intvolume: ' 11'
isi: '1'
issue: '1'
keyword:
- Eating disorders
- Eating Disorder Examination-Questionnaire
- EDE-Q
- Factor analysis
- Men’s health
- Body dissatisfaction
- Muscularity
language:
- iso: eng
place: London
pmid: '1'
publication: Journal of Eating Disorders
publication_identifier:
eissn:
- 2050-2974
publication_status: published
publisher: BioMed Central
quality_controlled: '1'
status: public
title: Factor structure of the Eating Disorder Examination-Questionnaire (EDE-Q) in
adult men with eating disorders
type: scientific_journal_article
user_id: '83781'
volume: 11
year: '2023'
...
---
_id: '13631'
abstract:
- lang: eng
text: This study examined the dimensional structure of the German Eating Disorder
Examination-Questionnaire (EDE-Q) in clinical groups of women with Anorexia Nervosa
(AN; N = 821), Bulimia Nervosa (BN; N = 573), and Binge-Eating Disorder (BED;
N = 359) using Exploratory Graph Analyses (EGA). The EGA yielded a 12-item-four-dimension
structure for the AN group (subscales “Restraint”, “Body Dissatisfaction”, “Preoccupation”,
“Importance”), a 20-item-five-dimension structure for the BN group (subscales
“Restraint”, “Body Dissatisfaction”, “Eating Concern”, “Preoccupation”, “Importance”),
and a 17-item-four-dimension structure for the BED group (subscales “Restraint”,
“Body Dissatisfaction”, “Concern”, “Importance”). This first investigation of
the EDE-Q's dimensional structure using EGA suggests that the original factor
model may be suboptimal for specific clinical ED samples and that alternative
scoring should be considered when screening specific cohorts or evaluating the
effects of interventions.
author:
- first_name: Nora M.
full_name: Laskowski, Nora M.
last_name: Laskowski
- first_name: Georg
full_name: Halbeisen, Georg
id: '85780'
last_name: Halbeisen
orcid: 0000-0002-9529-2215
- first_name: Karsten
full_name: Braks, Karsten
last_name: Braks
- first_name: Thomas J.
full_name: Huber, Thomas J.
last_name: Huber
- first_name: Georgios
full_name: Paslakis, Georgios
last_name: Paslakis
citation:
ama: Laskowski NM, Halbeisen G, Braks K, Huber TJ, Paslakis G. Exploratory graph
analysis (EGA) of the dimensional structure of the eating disorder examination-questionnaire
(EDE-Q) in women with eating disorders. Journal of Psychiatric Research.
2023;163(7):254-261. doi:10.1016/j.jpsychires.2023.05.063
apa: Laskowski, N. M., Halbeisen, G., Braks, K., Huber, T. J., & Paslakis, G.
(2023). Exploratory graph analysis (EGA) of the dimensional structure of the eating
disorder examination-questionnaire (EDE-Q) in women with eating disorders. Journal
of Psychiatric Research, 163(7), 254–261. https://doi.org/10.1016/j.jpsychires.2023.05.063
bjps: Laskowski NM et al. (2023) Exploratory Graph Analysis (EGA)
of the Dimensional Structure of the Eating Disorder Examination-Questionnaire
(EDE-Q) in Women with Eating Disorders. Journal of Psychiatric Research
163, 254–261.
chicago: 'Laskowski, Nora M., Georg Halbeisen, Karsten Braks, Thomas J. Huber, and
Georgios Paslakis. “Exploratory Graph Analysis (EGA) of the Dimensional Structure
of the Eating Disorder Examination-Questionnaire (EDE-Q) in Women with Eating
Disorders.” Journal of Psychiatric Research 163, no. 7 (2023): 254–61.
https://doi.org/10.1016/j.jpsychires.2023.05.063.'
chicago-de: 'Laskowski, Nora M., Georg Halbeisen, Karsten Braks, Thomas J. Huber
und Georgios Paslakis. 2023. Exploratory graph analysis (EGA) of the dimensional
structure of the eating disorder examination-questionnaire (EDE-Q) in women with
eating disorders. Journal of Psychiatric Research 163, Nr. 7: 254–261.
doi:10.1016/j.jpsychires.2023.05.063,
.'
din1505-2-1: 'Laskowski, Nora M. ;
Halbeisen, Georg ; Braks,
Karsten ; Huber, Thomas J.
; Paslakis, Georgios: Exploratory
graph analysis (EGA) of the dimensional structure of the eating disorder examination-questionnaire
(EDE-Q) in women with eating disorders. In: Journal of Psychiatric Research
Bd. 163. Amsterdam [u.a.], Elsevier BV (2023), Nr. 7, S. 254–261'
havard: N.M. Laskowski, G. Halbeisen, K. Braks, T.J. Huber, G. Paslakis, Exploratory
graph analysis (EGA) of the dimensional structure of the eating disorder examination-questionnaire
(EDE-Q) in women with eating disorders, Journal of Psychiatric Research. 163 (2023)
254–261.
ieee: 'N. M. Laskowski, G. Halbeisen, K. Braks, T. J. Huber, and G. Paslakis, “Exploratory
graph analysis (EGA) of the dimensional structure of the eating disorder examination-questionnaire
(EDE-Q) in women with eating disorders,” Journal of Psychiatric Research,
vol. 163, no. 7, pp. 254–261, 2023, doi: 10.1016/j.jpsychires.2023.05.063.'
mla: Laskowski, Nora M., et al. “Exploratory Graph Analysis (EGA) of the Dimensional
Structure of the Eating Disorder Examination-Questionnaire (EDE-Q) in Women with
Eating Disorders.” Journal of Psychiatric Research, vol. 163, no. 7, 2023,
pp. 254–61, https://doi.org/10.1016/j.jpsychires.2023.05.063.
short: N.M. Laskowski, G. Halbeisen, K. Braks, T.J. Huber, G. Paslakis, Journal
of Psychiatric Research 163 (2023) 254–261.
ufg: 'Laskowski, Nora M. u. a.: Exploratory graph analysis (EGA) of the dimensional
structure of the eating disorder examination-questionnaire (EDE-Q) in women with
eating disorders, in: Journal of Psychiatric Research 163 (2023), H. 7,
S. 254–261.'
van: Laskowski NM, Halbeisen G, Braks K, Huber TJ, Paslakis G. Exploratory graph
analysis (EGA) of the dimensional structure of the eating disorder examination-questionnaire
(EDE-Q) in women with eating disorders. Journal of Psychiatric Research. 2023;163(7):254–61.
date_created: 2026-03-27T09:50:25Z
date_updated: 2026-04-08T13:05:37Z
department:
- _id: DEP1500
doi: 10.1016/j.jpsychires.2023.05.063
extern: '1'
external_id:
isi:
- '001009449300001'
pmid:
- '37244063'
intvolume: ' 163'
isi: '1'
issue: '7'
keyword:
- Exploratory graph analysis
- EGA
- EDE-Q
- Eating disorder examination questionnaire
- Eating disorder
- Psychotherapy
language:
- iso: eng
page: 254-261
place: Amsterdam [u.a.]
pmid: '1'
publication: Journal of Psychiatric Research
publication_identifier:
eissn:
- 0022-3956
issn:
- 1879-1379
publication_status: published
publisher: Elsevier BV
status: public
title: Exploratory graph analysis (EGA) of the dimensional structure of the eating
disorder examination-questionnaire (EDE-Q) in women with eating disorders
type: scientific_journal_article
user_id: '83778'
volume: 163
year: '2023'
...
---
_id: '10326'
abstract:
- lang: eng
text: In the food industry, and especially in wines as products thereof, ethanol
and sulfur dioxide play an equally important role. Both substances are important
wine quality characteristics as they influence the taste and odor. As both substances
comprise volatile matter, electronic noses should be applicable to discriminate
the different qualities of wines. Our study investigates the influence of alcohol
and sulfur dioxide on the discrimination ability of wines (especially those of
the same grape variety) using two different electronic nose systems. One system
is equipped with metal oxide sensors and the other with quartz crystal microbalance
sensors. Contrary to indications in literature, where the alcohol content is discussed
to have a large influence on e-nose results, it was shown that a difference of
1 % ethanol was not sufficient to allow accurate discrimination using Linear Discriminant
Analysis by any system. On the positive side, the analyzed concentrations of ethanol
(about 12 %) did not superimpose other volatile information. So difference in
sulfur dioxide content gave an accuracy for sample discrimination of up to 90.6
% with MOS nose. Thus, we are so far partially able to discriminate wines with
electronic noses based on their volatile imprint.
author:
- first_name: Julius
full_name: Wörner, Julius
id: '79011'
last_name: Wörner
- first_name: Helene
full_name: Dörksen, Helene
id: '46416'
last_name: Dörksen
- first_name: Miriam
full_name: Pein-Hackelbusch, Miriam
id: '64952'
last_name: Pein-Hackelbusch
orcid: 0000-0002-7920-0595
citation:
ama: Wörner J, Dörksen H, Pein-Hackelbusch M. Key Indicators for the Discrimination
of Wines by Electronic Noses.; 2023. doi:https://doi.org/10.1109/INDIN51400.2023.10217912
apa: Wörner, J., Dörksen, H., & Pein-Hackelbusch, M. (2023). Key Indicators
for the Discrimination of Wines by Electronic Noses. In 2023 IEEE 21st International
Conference on Industrial Informatics (INDIN). 21st International Conference
on Industrial Informatics (INDIN), Lemgo. https://doi.org/10.1109/INDIN51400.2023.10217912
bjps: Wörner J, Dörksen H and Pein-Hackelbusch M (2023) Key Indicators
for the Discrimination of Wines by Electronic Noses. .
chicago: Wörner, Julius, Helene Dörksen, and Miriam Pein-Hackelbusch. Key Indicators
for the Discrimination of Wines by Electronic Noses. 2023 IEEE 21st International
Conference on Industrial Informatics (INDIN), 2023. https://doi.org/10.1109/INDIN51400.2023.10217912.
chicago-de: Wörner, Julius, Helene Dörksen und Miriam Pein-Hackelbusch. 2023. Key
Indicators for the Discrimination of Wines by Electronic Noses. 2023 IEEE
21st International Conference on Industrial Informatics (INDIN). doi:https://doi.org/10.1109/INDIN51400.2023.10217912,
.
din1505-2-1: 'Wörner, Julius ; Dörksen, Helene ; Pein-Hackelbusch,
Miriam: Key Indicators for the Discrimination of Wines by Electronic
Noses, 2023'
havard: J. Wörner, H. Dörksen, M. Pein-Hackelbusch, Key Indicators for the Discrimination
of Wines by Electronic Noses, 2023.
ieee: 'J. Wörner, H. Dörksen, and M. Pein-Hackelbusch, Key Indicators for the
Discrimination of Wines by Electronic Noses. 2023. doi: https://doi.org/10.1109/INDIN51400.2023.10217912.'
mla: Wörner, Julius, et al. “Key Indicators for the Discrimination of Wines by Electronic
Noses.” 2023 IEEE 21st International Conference on Industrial Informatics (INDIN),
2023, https://doi.org/10.1109/INDIN51400.2023.10217912.
short: J. Wörner, H. Dörksen, M. Pein-Hackelbusch, Key Indicators for the Discrimination
of Wines by Electronic Noses, 2023.
ufg: 'Wörner, Julius/Dörksen, Helene/Pein-Hackelbusch, Miriam: Key Indicators
for the Discrimination of Wines by Electronic Noses, o. O. 2023.'
van: Wörner J, Dörksen H, Pein-Hackelbusch M. Key Indicators for the Discrimination
of Wines by Electronic Noses. 2023 IEEE 21st International Conference on Industrial
Informatics (INDIN). 2023.
conference:
end_date: 2023-07-20
location: Lemgo
name: 21st International Conference on Industrial Informatics (INDIN)
start_date: 2023-07-18
date_created: 2023-09-14T05:50:47Z
date_updated: 2025-03-13T13:48:05Z
department:
- _id: DEP4000
- _id: DEP4028
doi: https://doi.org/10.1109/INDIN51400.2023.10217912
keyword:
- Ethanol
- Pipelines
- Metals
- Nose
- Electronic noses
- Sensor systems
- Sensors
- Quartz crystals
- Linear discriminant analysis
- Sulfur
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://ieeexplore.ieee.org/document/10217912
oa: '1'
publication: 2023 IEEE 21st International Conference on Industrial Informatics (INDIN)
publication_status: published
status: public
title: Key Indicators for the Discrimination of Wines by Electronic Noses
type: conference_speech
user_id: '64952'
year: '2023'
...
---
_id: '12811'
abstract:
- lang: eng
text: For environmental, sustainable economic and political reasons, recycling processes
are becoming increasingly important, aiming at a much higher use of secondary
raw materials. Currently, for the copper and aluminum industries, no method for
the non-destructive online analysis of heterogeneous materials is available. The
prompt gamma neutron activation analysis (PGNAA) has the potential to overcome
this challenge. A difficulty when using PGNAA for online classification arises
from the small amount of noisy data, due to short-term measurements. In this case,
classical evaluation methods using detailed peak by peak analysis fail. Therefore,
we propose to view spectral data as probability distributions. Then, we can classify
material using maximum log-likelihood with respect to kernel density estimation
and use discrete sampling to optimize hyperparameters. For measurements of pure
aluminum alloys we achieve near-perfect classification of aluminum alloys under
0.25 s.
author:
- first_name: Helmand
full_name: Shayan, Helmand
id: '79365'
last_name: Shayan
- first_name: Kai
full_name: Krycki, Kai
last_name: Krycki
- first_name: Marco
full_name: Doemeland, Marco
last_name: Doemeland
- first_name: Markus
full_name: Lange-Hegermann, Markus
id: '71761'
last_name: Lange-Hegermann
citation:
ama: Shayan H, Krycki K, Doemeland M, Lange-Hegermann M. PGNAA Spectral Classification
of Metal With Density Estimations. IEEE Transactions on Nuclear Science.
2023;70(6):1171-1177. doi:10.1109/tns.2023.3242626
apa: Shayan, H., Krycki, K., Doemeland, M., & Lange-Hegermann, M. (2023). PGNAA
Spectral Classification of Metal With Density Estimations. IEEE Transactions
on Nuclear Science, 70(6), 1171–1177. https://doi.org/10.1109/tns.2023.3242626
bjps: Shayan H et al. (2023) PGNAA Spectral Classification of Metal
With Density Estimations. IEEE Transactions on Nuclear Science 70,
1171–1177.
chicago: 'Shayan, Helmand, Kai Krycki, Marco Doemeland, and Markus Lange-Hegermann.
“PGNAA Spectral Classification of Metal With Density Estimations.” IEEE Transactions
on Nuclear Science 70, no. 6 (2023): 1171–77. https://doi.org/10.1109/tns.2023.3242626.'
chicago-de: 'Shayan, Helmand, Kai Krycki, Marco Doemeland und Markus Lange-Hegermann.
2023. PGNAA Spectral Classification of Metal With Density Estimations. IEEE
Transactions on Nuclear Science 70, Nr. 6: 1171–1177. doi:10.1109/tns.2023.3242626,
.'
din1505-2-1: 'Shayan, Helmand ; Krycki, Kai ; Doemeland,
Marco ; Lange-Hegermann, Markus:
PGNAA Spectral Classification of Metal With Density Estimations. In: IEEE Transactions
on Nuclear Science Bd. 70. New York, NY, IEEE (2023), Nr. 6, S. 1171–1177'
havard: H. Shayan, K. Krycki, M. Doemeland, M. Lange-Hegermann, PGNAA Spectral Classification
of Metal With Density Estimations, IEEE Transactions on Nuclear Science. 70 (2023)
1171–1177.
ieee: 'H. Shayan, K. Krycki, M. Doemeland, and M. Lange-Hegermann, “PGNAA Spectral
Classification of Metal With Density Estimations,” IEEE Transactions on Nuclear
Science, vol. 70, no. 6, pp. 1171–1177, 2023, doi: 10.1109/tns.2023.3242626.'
mla: Shayan, Helmand, et al. “PGNAA Spectral Classification of Metal With Density
Estimations.” IEEE Transactions on Nuclear Science, vol. 70, no. 6, 2023,
pp. 1171–77, https://doi.org/10.1109/tns.2023.3242626.
short: H. Shayan, K. Krycki, M. Doemeland, M. Lange-Hegermann, IEEE Transactions
on Nuclear Science 70 (2023) 1171–1177.
ufg: 'Shayan, Helmand u. a.: PGNAA Spectral Classification of Metal With
Density Estimations, in: IEEE Transactions on Nuclear Science 70 (2023),
H. 6, S. 1171–1177.'
van: Shayan H, Krycki K, Doemeland M, Lange-Hegermann M. PGNAA Spectral Classification
of Metal With Density Estimations. IEEE Transactions on Nuclear Science. 2023;70(6):1171–7.
date_created: 2025-04-16T12:38:21Z
date_updated: 2025-06-26T07:45:59Z
department:
- _id: DEP5023
doi: 10.1109/tns.2023.3242626
external_id:
isi:
- '001012981300044'
intvolume: ' 70'
isi: '1'
issue: '6'
keyword:
- Classification of metal
- kernel density estimation
- maximum log-likelihood
- online classification
- prompt gamma neutron activation analysis (PGNAA) spectral classification
- random sampling
language:
- iso: eng
page: 1171-1177
place: New York, NY
publication: IEEE Transactions on Nuclear Science
publication_identifier:
eissn:
- 1558-1578
issn:
- 0018-9499
publication_status: published
publisher: IEEE
status: public
title: PGNAA Spectral Classification of Metal With Density Estimations
type: scientific_journal_article
user_id: '83781'
volume: 70
year: '2023'
...
---
_id: '13010'
abstract:
- lang: eng
text: Especially in highly interdisciplinary fields such as automation engineering,
contemporary programming education with tailored assignments and individual feedback
is a major challenge for educational institutions due to the increasing number
of students per teacher and the ever-increasing demand for computer science professionals.
To address this gap, we present ”KIAAA” an AI Assistant for Automation Engineering
Teaching, a work-in-progress approach for an integrated, customized, and AI-based
learning support system for automation and programming courses based on instructor-defined
course objectives. Thereby in the KIAAA system, the individual knowledge level
of the students is determined and individually tailored virtual learning scenarios
are generated based on the knowledge and learning profile of the students. These
are iteratively adapted based on the answers given. To achieve this, KIAAA uses
several AI components, a hybrid rule-based scenario generation component, a Help-DKT-based
cognitive model, and a solution assessor that uses a combination of traditional
code analysis methods and AI-based analyses methods for automated programming
task assessment. These components are the main parts of KIAAA to generate customized
programming scenarios as well as visualization and simulation based on a modern
game and physics engine.
author:
- first_name: Sebastian
full_name: Eilermann, Sebastian
last_name: Eilermann
- first_name: Leon
full_name: Wehmeier, Leon
id: '81257'
last_name: Wehmeier
- first_name: Oliver
full_name: Niggemann, Oliver
last_name: Niggemann
- first_name: Andreas
full_name: Deuter, Andreas
id: '62088'
last_name: Deuter
orcid: 0000-0002-6529-6215
citation:
ama: 'Eilermann S, Wehmeier L, Niggemann O, Deuter A. KIAAA: An AI Assistant
for Teaching Programming in the Field of Automation. (Jasperneite J, IEEE
International Conference on Industrial Informatics , Institute of Electrical and
Electronics Engineers, eds.). IEEE; 2023. doi:10.1109/indin51400.2023.10218157'
apa: 'Eilermann, S., Wehmeier, L., Niggemann, O., & Deuter, A. (2023). KIAAA:
An AI Assistant for Teaching Programming in the Field of Automation. In J. Jasperneite,
IEEE International Conference on Industrial Informatics , & Institute of Electrical
and Electronics Engineers (Eds.), 2023 IEEE 21st International Conference on
Industrial Informatics (INDIN). IEEE. https://doi.org/10.1109/indin51400.2023.10218157'
bjps: 'Eilermann S et al. (2023) KIAAA: An AI Assistant for Teaching
Programming in the Field of Automation, Jasperneite J, IEEE International
Conference on Industrial Informatics , and Institute of Electrical and Electronics
Engineers (eds). [Piscataway, NJ]: IEEE.'
chicago: 'Eilermann, Sebastian, Leon Wehmeier, Oliver Niggemann, and Andreas Deuter.
KIAAA: An AI Assistant for Teaching Programming in the Field of Automation.
Edited by Jürgen Jasperneite, IEEE International Conference on Industrial Informatics
, and Institute of Electrical and Electronics Engineers. 2023 IEEE 21st International
Conference on Industrial Informatics (INDIN). [Piscataway, NJ]: IEEE, 2023.
https://doi.org/10.1109/indin51400.2023.10218157.'
chicago-de: 'Eilermann, Sebastian, Leon Wehmeier, Oliver Niggemann und Andreas Deuter.
2023. KIAAA: An AI Assistant for Teaching Programming in the Field of Automation.
Hg. von Jürgen Jasperneite, IEEE International Conference on Industrial Informatics
, und Institute of Electrical and Electronics Engineers. 2023 IEEE 21st International
Conference on Industrial Informatics (INDIN). [Piscataway, NJ]: IEEE. doi:10.1109/indin51400.2023.10218157,
.'
din1505-2-1: 'Eilermann, Sebastian
; Wehmeier, Leon ; Niggemann,
Oliver ; Deuter, Andreas
; Jasperneite, J. ; IEEE
International Conference on Industrial Informatics ; Institute
of Electrical and Electronics Engineers (Hrsg.): KIAAA: An AI Assistant
for Teaching Programming in the Field of Automation. [Piscataway, NJ] : IEEE,
2023'
havard: 'S. Eilermann, L. Wehmeier, O. Niggemann, A. Deuter, KIAAA: An AI Assistant
for Teaching Programming in the Field of Automation, IEEE, [Piscataway, NJ], 2023.'
ieee: 'S. Eilermann, L. Wehmeier, O. Niggemann, and A. Deuter, KIAAA: An AI Assistant
for Teaching Programming in the Field of Automation. [Piscataway, NJ]: IEEE,
2023. doi: 10.1109/indin51400.2023.10218157.'
mla: 'Eilermann, Sebastian, et al. “KIAAA: An AI Assistant for Teaching Programming
in the Field of Automation.” 2023 IEEE 21st International Conference on Industrial
Informatics (INDIN), edited by Jürgen Jasperneite et al., IEEE, 2023, https://doi.org/10.1109/indin51400.2023.10218157.'
short: 'S. Eilermann, L. Wehmeier, O. Niggemann, A. Deuter, KIAAA: An AI Assistant
for Teaching Programming in the Field of Automation, IEEE, [Piscataway, NJ], 2023.'
ufg: 'Eilermann, Sebastian u. a.: KIAAA: An AI Assistant for Teaching Programming
in the Field of Automation, hg. von Jasperneite, Jürgen/IEEE International Conference
on Industrial Informatics , Institute of Electrical and Electronics Engineers,
[Piscataway, NJ] 2023.'
van: 'Eilermann S, Wehmeier L, Niggemann O, Deuter A. KIAAA: An AI Assistant for
Teaching Programming in the Field of Automation. Jasperneite J, IEEE International
Conference on Industrial Informatics , Institute of Electrical and Electronics
Engineers, editors. 2023 IEEE 21st International Conference on Industrial Informatics
(INDIN). [Piscataway, NJ]: IEEE; 2023.'
conference:
end_date: 2023-07-20
location: Lemgo
name: 21st International Conference on Industrial Informatics (INDIN)
start_date: 2023-07-18
corporate_editor:
- 'IEEE International Conference on Industrial Informatics '
- Institute of Electrical and Electronics Engineers
date_created: 2025-06-24T09:24:47Z
date_updated: 2025-06-24T09:38:24Z
department:
- _id: DEP7022
- _id: DEP1306
- _id: DEP7001
doi: 10.1109/indin51400.2023.10218157
editor:
- first_name: Jürgen
full_name: Jasperneite, Jürgen
id: '1899'
last_name: Jasperneite
keyword:
- Visualization
- Automation
- Education
- Games
- Hybrid power systems
- Task analysis
- Artificial intelligence
language:
- iso: eng
place: '[Piscataway, NJ]'
publication: 2023 IEEE 21st International Conference on Industrial Informatics (INDIN)
publication_identifier:
eisbn:
- 978-1-6654-9313-0
isbn:
- 978-1-6654-9314-7
publication_status: published
publisher: IEEE
quality_controlled: '1'
status: public
title: 'KIAAA: An AI Assistant for Teaching Programming in the Field of Automation'
type: conference_editor_article
user_id: '83781'
year: '2023'
...
---
_id: '13014'
abstract:
- lang: eng
text: In the interdisciplinary field of green space health research, there is a
demand to reduce the effort to assess green space, especially for non-spatial
disciplines. To address this issue, we developed AID-PRIGSHARE, an open-source
script that automates over 400 QGIS processes to substantially reduces the time-intensive
task of generating green space indicators. AID-PRIGSHARE calculatesgreenness,
green space amount, access to green infrastructure, and green space uses within
distances of 100–1500 m around geolocations. This substantially reduces the effort
for sensitivity analysis and may provide support for research that aims to understand
the impact of green space indicators on health outcomes.
article_number: '100506'
author:
- first_name: Marcel
full_name: Cardinali, Marcel
id: '58462'
last_name: Cardinali
orcid: 0000-0002-8841-9345
- first_name: Mariëlle A.
full_name: Beenackers, Mariëlle A.
last_name: Beenackers
- first_name: Arjan
full_name: van Timmeren, Arjan
last_name: van Timmeren
- first_name: Uta
full_name: Pottgiesser, Uta
id: '27166'
last_name: Pottgiesser
orcid: 0000-0002-8594-3168
citation:
ama: 'Cardinali M, Beenackers MA, van Timmeren A, Pottgiesser U. AID-PRIGSHARE:
Automatization of indicator development in green space health research in QGIS.
Accompanying script to the PRIGSHARE reporting guidelines. Software Impacts.
2023;16. doi:10.1016/j.simpa.2023.100506'
apa: 'Cardinali, M., Beenackers, M. A., van Timmeren, A., & Pottgiesser, U.
(2023). AID-PRIGSHARE: Automatization of indicator development in green space
health research in QGIS. Accompanying script to the PRIGSHARE reporting guidelines.
Software Impacts, 16, Article 100506. https://doi.org/10.1016/j.simpa.2023.100506'
bjps: 'Cardinali M et al. (2023) AID-PRIGSHARE: Automatization of
Indicator Development in Green Space Health Research in QGIS. Accompanying Script
to the PRIGSHARE Reporting Guidelines. Software Impacts 16.'
chicago: 'Cardinali, Marcel, Mariëlle A. Beenackers, Arjan van Timmeren, and Uta
Pottgiesser. “AID-PRIGSHARE: Automatization of Indicator Development in Green
Space Health Research in QGIS. Accompanying Script to the PRIGSHARE Reporting
Guidelines.” Software Impacts 16 (2023). https://doi.org/10.1016/j.simpa.2023.100506.'
chicago-de: 'Cardinali, Marcel, Mariëlle A. Beenackers, Arjan van Timmeren und Uta
Pottgiesser. 2023. AID-PRIGSHARE: Automatization of indicator development in green
space health research in QGIS. Accompanying script to the PRIGSHARE reporting
guidelines. Software Impacts 16. doi:10.1016/j.simpa.2023.100506,
.'
din1505-2-1: 'Cardinali, Marcel ;
Beenackers, Mariëlle A. ; van Timmeren, Arjan ; Pottgiesser,
Uta: AID-PRIGSHARE: Automatization of indicator development in green space
health research in QGIS. Accompanying script to the PRIGSHARE reporting guidelines.
In: Software Impacts Bd. 16. Amsterdam [u.a.], Elsevier BV (2023)'
havard: 'M. Cardinali, M.A. Beenackers, A. van Timmeren, U. Pottgiesser, AID-PRIGSHARE:
Automatization of indicator development in green space health research in QGIS.
Accompanying script to the PRIGSHARE reporting guidelines, Software Impacts. 16
(2023).'
ieee: 'M. Cardinali, M. A. Beenackers, A. van Timmeren, and U. Pottgiesser, “AID-PRIGSHARE:
Automatization of indicator development in green space health research in QGIS.
Accompanying script to the PRIGSHARE reporting guidelines,” Software Impacts,
vol. 16, Art. no. 100506, 2023, doi: 10.1016/j.simpa.2023.100506.'
mla: 'Cardinali, Marcel, et al. “AID-PRIGSHARE: Automatization of Indicator Development
in Green Space Health Research in QGIS. Accompanying Script to the PRIGSHARE Reporting
Guidelines.” Software Impacts, vol. 16, 100506, 2023, https://doi.org/10.1016/j.simpa.2023.100506.'
short: M. Cardinali, M.A. Beenackers, A. van Timmeren, U. Pottgiesser, Software
Impacts 16 (2023).
ufg: 'Cardinali, Marcel u. a.: AID-PRIGSHARE: Automatization of indicator
development in green space health research in QGIS. Accompanying script to the
PRIGSHARE reporting guidelines, in: Software Impacts 16 (2023).'
van: 'Cardinali M, Beenackers MA, van Timmeren A, Pottgiesser U. AID-PRIGSHARE:
Automatization of indicator development in green space health research in QGIS.
Accompanying script to the PRIGSHARE reporting guidelines. Software Impacts. 2023;16.'
date_created: 2025-06-24T13:17:41Z
date_updated: 2025-06-25T13:14:36Z
department:
- _id: DEP1600
- _id: DEP1055
doi: 10.1016/j.simpa.2023.100506
external_id:
isi:
- '001001413900001'
intvolume: ' 16'
isi: '1'
keyword:
- Green space
- Sensitivity analysis
- Indicator
- GIS
- Script
- Automatization
language:
- iso: eng
place: Amsterdam [u.a.]
publication: Software Impacts
publication_identifier:
issn:
- 2665-9638
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: 'AID-PRIGSHARE: Automatization of indicator development in green space health
research in QGIS. Accompanying script to the PRIGSHARE reporting guidelines'
type: scientific_journal_article
user_id: '83781'
volume: 16
year: '2023'
...
---
_id: '9204'
abstract:
- lang: eng
text: The development of autonomous vehicles and the integration of new information
and communication technologies are making the reliability of electrical systems
and components in modern vehicles increasingly important. Electrical connectors
are a crucial component in an electrical on-board system. They are exposed to
a wide variety of influences by the environment and operating conditions. Thus,
the degradation of electrical connectors can occur. Material and surface analysis
methods are the tools used to analyze the degradation mechanisms in connectors
after lifetime tests, as well as in field operations. Within the framework of
this study, a wide variety of methods from the analytical scope are presented
and discussed. The connector surfaces degraded by different failure mechanisms
are analyzed using various material and surface analysis methods. The quality
and the nature of the analyses results obtained from various analysis methods
are compared. Also, this study deals with the benefits and limitations, as well
as the effort and the specific challenges of different material and surface analytical
methods for the evaluation of failure mechanisms from the point of view of a material
and surface analyst.
author:
- first_name: Philipp
full_name: Kolmer, Philipp
last_name: Kolmer
- first_name: Abhay Rammurti
full_name: Shukla, Abhay Rammurti
id: '72757'
last_name: Shukla
- first_name: Jian
full_name: Song, Jian
id: '5297'
last_name: Song
citation:
ama: 'Kolmer P, Shukla AR, Song J. Methods of Material and Surface Analysis for
the Evaluation of Failure Modes for Electrical Connectors. Technologies : open
access journal. 2022;10(6):124. doi:https://doi.org/10.3390/technologies10060124'
apa: 'Kolmer, P., Shukla, A. R., & Song, J. (2022). Methods of Material and
Surface Analysis for the Evaluation of Failure Modes for Electrical Connectors.
Technologies : Open Access Journal, 10(6), 124. https://doi.org/10.3390/technologies10060124'
bjps: 'Kolmer P, Shukla AR and Song J (2022) Methods of Material and Surface
Analysis for the Evaluation of Failure Modes for Electrical Connectors. Technologies :
open access journal 10, 124.'
chicago: 'Kolmer, Philipp, Abhay Rammurti Shukla, and Jian Song. “Methods of Material
and Surface Analysis for the Evaluation of Failure Modes for Electrical Connectors.”
Technologies : Open Access Journal 10, no. 6 (2022): 124. https://doi.org/10.3390/technologies10060124.'
chicago-de: 'Kolmer, Philipp, Abhay Rammurti Shukla und Jian Song. 2022. Methods
of Material and Surface Analysis for the Evaluation of Failure Modes for Electrical
Connectors. Technologies : open access journal 10, Nr. 6: 124. doi:https://doi.org/10.3390/technologies10060124,
.'
din1505-2-1: 'Kolmer, Philipp ; Shukla, Abhay Rammurti ; Song,
Jian: Methods of Material and Surface Analysis for the Evaluation of Failure
Modes for Electrical Connectors. In: Technologies : open access journal
Bd. 10. Basel, MDPI (2022), Nr. 6, S. 124'
havard: 'P. Kolmer, A.R. Shukla, J. Song, Methods of Material and Surface Analysis
for the Evaluation of Failure Modes for Electrical Connectors, Technologies :
Open Access Journal. 10 (2022) 124.'
ieee: 'P. Kolmer, A. R. Shukla, and J. Song, “Methods of Material and Surface Analysis
for the Evaluation of Failure Modes for Electrical Connectors,” Technologies :
open access journal, vol. 10, no. 6, p. 124, 2022, doi: https://doi.org/10.3390/technologies10060124.'
mla: 'Kolmer, Philipp, et al. “Methods of Material and Surface Analysis for the
Evaluation of Failure Modes for Electrical Connectors.” Technologies : Open
Access Journal, vol. 10, no. 6, 2022, p. 124, https://doi.org/10.3390/technologies10060124.'
short: 'P. Kolmer, A.R. Shukla, J. Song, Technologies : Open Access Journal 10 (2022)
124.'
ufg: 'Kolmer, Philipp/Shukla, Abhay Rammurti/Song, Jian: Methods of Material
and Surface Analysis for the Evaluation of Failure Modes for Electrical Connectors,
in: Technologies : open access journal 10 (2022), H. 6, S. 124.'
van: 'Kolmer P, Shukla AR, Song J. Methods of Material and Surface Analysis for
the Evaluation of Failure Modes for Electrical Connectors. Technologies : open
access journal. 2022;10(6):124.'
date_created: 2022-12-11T12:35:54Z
date_updated: 2024-08-05T07:19:56Z
ddc:
- '600'
department:
- _id: DEP6012
doi: https://doi.org/10.3390/technologies10060124
intvolume: ' 10'
issue: '6'
keyword:
- electrical connector
- failure modes
- wear
- fretting corrosion
- analysis
- material
- method
language:
- iso: eng
page: '124'
place: Basel
publication: 'Technologies : open access journal'
publication_identifier:
eissn:
- '2227-7080 '
publication_status: published
publisher: MDPI
status: public
title: Methods of Material and Surface Analysis for the Evaluation of Failure Modes
for Electrical Connectors
type: scientific_journal_article
user_id: '83781'
volume: 10
year: '2022'
...
---
_id: '9211'
abstract:
- lang: eng
text: Lifetime tests of connectors are time consuming and labor intensive. Our study
reveals a strong correlation between the statistical characteristics of contact
resistance development in the early stages of lifetime tests and the final results
of the tests. This correlation enables a further time lapse of lifetime tests
and the prediction of the state of the health of connectors which can be utilized
in the development of diagnostic strategy in sophisticated networks with very
high number of connectors as well as in a quick classification of connectors with
respect to their design features. Methods of statistical evaluation are introduced
and the sensitivity analyses of different characteristics for the state of health
of connectors are conducted.
author:
- first_name: Jian
full_name: Song, Jian
id: '5297'
last_name: Song
- first_name: Abhay Rammurti
full_name: Shukla, Abhay Rammurti
id: '72757'
last_name: Shukla
- first_name: Roman
full_name: Probst, Roman
id: '69156'
last_name: Probst
citation:
ama: Song J, Shukla AR, Probst R. State of Health of Connectors – Early Indicators.
IEEE; 2022:272-278. doi:10.1109/HLM54538.2022.9969839
apa: 'Song, J., Shukla, A. R., & Probst, R. (2022). State of Health of Connectors
– Early Indicators. In Electrical contacts - 2022 : proceedings of the Sixty-Seventh
IEEE Holm Conference on Electrical Contacts (pp. 272–278). IEEE. https://doi.org/10.1109/HLM54538.2022.9969839'
bjps: 'Song J, Shukla AR and Probst R (2022) State of Health of Connectors
– Early Indicators. Piscataway, NJ: IEEE.'
chicago: 'Song, Jian, Abhay Rammurti Shukla, and Roman Probst. State of Health
of Connectors – Early Indicators. Electrical Contacts - 2022 : Proceedings
of the Sixty-Seventh IEEE Holm Conference on Electrical Contacts. Piscataway,
NJ: IEEE, 2022. https://doi.org/10.1109/HLM54538.2022.9969839.'
chicago-de: 'Song, Jian, Abhay Rammurti Shukla und Roman Probst. 2022. State
of Health of Connectors – Early Indicators. Electrical contacts - 2022 :
proceedings of the Sixty-Seventh IEEE Holm Conference on Electrical Contacts.
Piscataway, NJ: IEEE. doi:10.1109/HLM54538.2022.9969839,
.'
din1505-2-1: 'Song, Jian ; Shukla,
Abhay Rammurti ; Probst, Roman:
State of Health of Connectors – Early Indicators. Piscataway, NJ : IEEE,
2022'
havard: J. Song, A.R. Shukla, R. Probst, State of Health of Connectors – Early Indicators,
IEEE, Piscataway, NJ, 2022.
ieee: 'J. Song, A. R. Shukla, and R. Probst, State of Health of Connectors –
Early Indicators. Piscataway, NJ: IEEE, 2022, pp. 272–278. doi: 10.1109/HLM54538.2022.9969839.'
mla: 'Song, Jian, et al. “State of Health of Connectors – Early Indicators.” Electrical
Contacts - 2022 : Proceedings of the Sixty-Seventh IEEE Holm Conference on Electrical
Contacts, IEEE, 2022, pp. 272–78, https://doi.org/10.1109/HLM54538.2022.9969839.'
short: J. Song, A.R. Shukla, R. Probst, State of Health of Connectors – Early Indicators,
IEEE, Piscataway, NJ, 2022.
ufg: 'Song, Jian/Shukla, Abhay Rammurti/Probst, Roman: State of Health of
Connectors – Early Indicators, Piscataway, NJ 2022.'
van: 'Song J, Shukla AR, Probst R. State of Health of Connectors – Early Indicators.
Electrical contacts - 2022 : proceedings of the Sixty-Seventh IEEE Holm Conference
on Electrical Contacts. Piscataway, NJ: IEEE; 2022.'
conference:
end_date: 2022-10-26
location: Tampa, FL, USA
name: 67th Holm Conference on Electrical Contacts
start_date: 2022-10-23
date_created: 2022-12-11T13:50:30Z
date_updated: 2024-08-05T08:01:22Z
department:
- _id: DEP6012
doi: 10.1109/HLM54538.2022.9969839
keyword:
- Connectors
- Correlation
- Sensitivity analysis
- Contact resistance
- Lifetime estimation
- Reliability
- Electrical resistance measurement
language:
- iso: eng
page: 272 - 278
place: Piscataway, NJ
publication: 'Electrical contacts - 2022 : proceedings of the Sixty-Seventh IEEE Holm
Conference on Electrical Contacts'
publication_identifier:
eisbn:
- 978-1-6654-5965-5
isbn:
- 978-1-6654-5966-2
- 978-1-6654-5967-9
issn:
- 2158-9992
publication_status: published
publisher: IEEE
status: public
title: State of Health of Connectors – Early Indicators
type: conference_editor_article
user_id: '83781'
year: '2022'
...
---
_id: '9213'
abstract:
- lang: eng
text: The function and reliability of electrical connectors in automotive applications
is crucial for vehicle safety, especially with regard to E-mobility and autonomous
driving. For this reason, electrical connectors are being developed for long-term
use applications. However, a small amount of function failures are still being
observed in long-term use field vehicles. In this study all electrical connectors
of five long-term driven vehicles from various car manufacturers are disassembled
and analyzed. The same analysis procedure is followed for every vehicle and the
electrical resistance of the connectors is measured to determine electrical failures.
The contacts of failed connectors are further analyzed using optical microscopy,
XRF spectroscopy, EDS and detailed contact resistance mapping. By comparing the
connectors with electrical failures to the same types of connectors with a proper
electrical resistance, failure mechanisms can be detected and analyzed. The frequency
of various failure mechanisms is statistically evaluated. The results of the analysis
provide valuable indications with respect to improvement of the reliability of
connectors.
author:
- first_name: Dirk
full_name: Hilmert, Dirk
id: '74212'
last_name: Hilmert
- first_name: Haomiao
full_name: Yuan, Haomiao
id: '61860'
last_name: Yuan
- first_name: Jian
full_name: Song, Jian
id: '5297'
last_name: Song
citation:
ama: Hilmert D, Yuan H, Song J. The Analysis of Failure Mechanisms of Electrical
Connectors in Long-Term Use Field Vehicles. IEEE; 2022:9-16. doi:10.1109/HLM54538.2022.9969820
apa: 'Hilmert, D., Yuan, H., & Song, J. (2022). The Analysis of Failure Mechanisms
of Electrical Connectors in Long-term Use Field Vehicles. In Electrical contacts
- 2022 : proceedings of the Sixty-Seventh IEEE Holm Conference on Electrical Contacts
(pp. 9–16). IEEE. https://doi.org/10.1109/HLM54538.2022.9969820'
bjps: 'Hilmert D, Yuan H and Song J (2022) The Analysis of Failure Mechanisms
of Electrical Connectors in Long-Term Use Field Vehicles. Piscataway, NJ:
IEEE.'
chicago: 'Hilmert, Dirk, Haomiao Yuan, and Jian Song. The Analysis of Failure
Mechanisms of Electrical Connectors in Long-Term Use Field Vehicles. Electrical
Contacts - 2022 : Proceedings of the Sixty-Seventh IEEE Holm Conference on Electrical
Contacts. Piscataway, NJ: IEEE, 2022. https://doi.org/10.1109/HLM54538.2022.9969820.'
chicago-de: 'Hilmert, Dirk, Haomiao Yuan und Jian Song. 2022. The Analysis of
Failure Mechanisms of Electrical Connectors in Long-term Use Field Vehicles.
Electrical contacts - 2022 : proceedings of the Sixty-Seventh IEEE Holm Conference
on Electrical Contacts. Piscataway, NJ: IEEE. doi:10.1109/HLM54538.2022.9969820,
.'
din1505-2-1: 'Hilmert, Dirk ; Yuan, Haomiao ; Song,
Jian: The Analysis of Failure Mechanisms of Electrical Connectors in
Long-term Use Field Vehicles. Piscataway, NJ : IEEE, 2022'
havard: D. Hilmert, H. Yuan, J. Song, The Analysis of Failure Mechanisms of Electrical
Connectors in Long-term Use Field Vehicles, IEEE, Piscataway, NJ, 2022.
ieee: 'D. Hilmert, H. Yuan, and J. Song, The Analysis of Failure Mechanisms of
Electrical Connectors in Long-term Use Field Vehicles. Piscataway, NJ: IEEE,
2022, pp. 9–16. doi: 10.1109/HLM54538.2022.9969820.'
mla: 'Hilmert, Dirk, et al. “The Analysis of Failure Mechanisms of Electrical Connectors
in Long-Term Use Field Vehicles.” Electrical Contacts - 2022 : Proceedings
of the Sixty-Seventh IEEE Holm Conference on Electrical Contacts, IEEE, 2022,
pp. 9–16, https://doi.org/10.1109/HLM54538.2022.9969820.'
short: D. Hilmert, H. Yuan, J. Song, The Analysis of Failure Mechanisms of Electrical
Connectors in Long-Term Use Field Vehicles, IEEE, Piscataway, NJ, 2022.
ufg: 'Hilmert, Dirk/Yuan, Haomiao/Song, Jian: The Analysis of Failure Mechanisms
of Electrical Connectors in Long-term Use Field Vehicles, Piscataway, NJ 2022.'
van: 'Hilmert D, Yuan H, Song J. The Analysis of Failure Mechanisms of Electrical
Connectors in Long-term Use Field Vehicles. Electrical contacts - 2022 : proceedings
of the Sixty-Seventh IEEE Holm Conference on Electrical Contacts. Piscataway,
NJ: IEEE; 2022.'
conference:
end_date: 2022-10-26
location: Tampa, FL, USA
name: 67th Holm Conference on Electrical Contacts
start_date: 2022-10-23
date_created: 2022-12-11T13:55:18Z
date_updated: 2024-08-05T08:18:13Z
department:
- _id: DEP6012
doi: 10.1109/HLM54538.2022.9969820
keyword:
- Connectors
- Resistance
- Spectroscopy
- Optical microscopy
- Microscopy
- Vehicle safety
- Failure analysis
language:
- iso: eng
page: 9 - 16
place: Piscataway, NJ
publication: 'Electrical contacts - 2022 : proceedings of the Sixty-Seventh IEEE Holm
Conference on Electrical Contacts'
publication_identifier:
eisbn:
- 978-1-6654-5965-5
isbn:
- 978-1-6654-5966-2
- 978-1-6654-5967-9
issn:
- 2158-9992
publication_status: published
publisher: IEEE
status: public
title: The Analysis of Failure Mechanisms of Electrical Connectors in Long-term Use
Field Vehicles
type: conference_editor_article
user_id: '83781'
year: '2022'
...
---
_id: '9281'
abstract:
- lang: eng
text: The four Futuro case studies (Futuro No. 000, Corfu-Futuro, Donaldson-Futuro,
Munich-Futuro) presented in this journal document conservation approaches to plastic
buildings and elements – in this case, glass-reinforced plastic (GRP) sandwich
panels. They contribute to the definition of general conservation approaches,
and at the same time reveal the knowledge gaps related to their individual histories
and the necessity of a framework for managing interventions that are suited to
GRP sandwich panels. The history and physical fabric of the selected Futuros,
and the interventions done are compared in this article. The comparative analysis
demonstrates how important it is to integrate a framework for adequate research
and documentation into the conservation processes, in order to understand each
building’s significance and plan the interventions accordingly. The arguments
deduced from the analyses demonstrate which factors differentiate the conservation
solutions of the case studies in order to reframe the Futuros’ expected life-span
into a managed life-cycle.
author:
- first_name: Ashal
full_name: Tyurkay, Ashal
last_name: Tyurkay
- first_name: Uta
full_name: Pottgiesser, Uta
id: '27166'
last_name: Pottgiesser
orcid: 0000-0002-8594-3168
citation:
ama: 'Tyurkay A, Pottgiesser U. FROM DETERIORATION TO REVIVAL: Approaches to the
Conservation of Plastic Buildings. Docomomo Journal. 2022;66(1):75-83.'
apa: 'Tyurkay, A., & Pottgiesser, U. (2022). FROM DETERIORATION TO REVIVAL:
Approaches to the Conservation of Plastic Buildings. Docomomo Journal,
66(1), 75–83.'
bjps: 'Tyurkay A and Pottgiesser U (2022) FROM DETERIORATION TO REVIVAL:
Approaches to the Conservation of Plastic Buildings. Docomomo Journal 66,
75–83.'
chicago: 'Tyurkay, Ashal, and Uta Pottgiesser. “FROM DETERIORATION TO REVIVAL: Approaches
to the Conservation of Plastic Buildings.” Docomomo Journal 66, no. 1 (2022):
75–83.'
chicago-de: 'Tyurkay, Ashal und Uta Pottgiesser. 2022. FROM DETERIORATION TO REVIVAL:
Approaches to the Conservation of Plastic Buildings. Docomomo Journal 66,
Nr. 1: 75–83.'
din1505-2-1: 'Tyurkay, Ashal ; Pottgiesser, Uta: FROM DETERIORATION TO
REVIVAL: Approaches to the Conservation of Plastic Buildings. In: Docomomo
Journal Bd. 66. Delft, Docomomo International (2022), Nr. 1, S. 75–83'
havard: 'A. Tyurkay, U. Pottgiesser, FROM DETERIORATION TO REVIVAL: Approaches to
the Conservation of Plastic Buildings., Docomomo Journal. 66 (2022) 75–83.'
ieee: 'A. Tyurkay and U. Pottgiesser, “FROM DETERIORATION TO REVIVAL: Approaches
to the Conservation of Plastic Buildings.,” Docomomo Journal, vol. 66,
no. 1, pp. 75–83, 2022.'
mla: 'Tyurkay, Ashal, and Uta Pottgiesser. “FROM DETERIORATION TO REVIVAL: Approaches
to the Conservation of Plastic Buildings.” Docomomo Journal, vol. 66, no.
1, 2022, pp. 75–83.'
short: A. Tyurkay, U. Pottgiesser, Docomomo Journal 66 (2022) 75–83.
ufg: 'Tyurkay, Ashal/Pottgiesser, Uta: FROM DETERIORATION TO REVIVAL: Approaches
to the Conservation of Plastic Buildings., in: Docomomo Journal 66 (2022),
H. 1, S. 75–83.'
van: 'Tyurkay A, Pottgiesser U. FROM DETERIORATION TO REVIVAL: Approaches to the
Conservation of Plastic Buildings. Docomomo Journal. 2022;66(1):75–83.'
date_created: 2022-12-24T08:42:07Z
date_updated: 2024-08-05T08:26:26Z
department:
- _id: DEP1000
- _id: DEP1020
intvolume: ' 66'
issue: '1'
keyword:
- Futuro
- deterioration
- Conservation Management Plan (CMP)
- comparative analysis
- plastics
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://docomomojournal.com/index.php/journal/article/view/537
oa: '1'
page: 75-83
place: Delft
publication: Docomomo Journal
publication_identifier:
eissn:
- ' 2773-1634'
issn:
- 1380-3204
publication_status: published
publisher: Docomomo International
quality_controlled: '1'
status: public
title: 'FROM DETERIORATION TO REVIVAL: Approaches to the Conservation of Plastic Buildings.'
type: scientific_journal_article
user_id: '83781'
volume: 66
year: '2022'
...
---
_id: '5425'
abstract:
- lang: eng
text: The feasibility of inline classification and characterization of seven fruit
juice varieties was investigated by the application of near-infrared spectroscopy
(NIRS) combined with chemometrics. The findings are intended to be used to optimize
the flash pasteurization of liquid foods. More precise information of the kind
of product in real time had to be achieved to enable a more product-specific process.
Using the method of partial least squares discriminant analysis, the fruit juice
varieties were classified, showing a classification rate of 100% regarding an
internal and 69% regarding an external test sets. A characterization by the extract
content, pH value, turbidity, and viscosity was made by fitting a partial least
squares regression model. The percentage prediction error of the pH value was
<3% for internal and external test sets, and for the Brix value prediction errors
were about 4% (internal) and 20% (external). The parameters viscosity and turbidity
were found to be unsuitable. Despite this, the strategy applied to gain more product-specific
information in real time showed to be feasible. By linking the results to a database
containing potentially harmful microorganisms for various types of fruit juices,
a more product-specific calculation of the necessary heat input can be performed.
To demonstrate the practical relevance, a comparison between conventional and
product-adapted process control was performed using two fruit varieties as examples
in case of Alicyclobacillus acidoterrestris. Thus, with more accurate product
information, achieved through the use of NIRS with chemometrics, a more precise
calculation of the heat input can be achieved.
author:
- first_name: Imke
full_name: Weishaupt, Imke
id: '58425'
last_name: Weishaupt
- first_name: Peter
full_name: Neubauer, Peter
last_name: Neubauer
- first_name: Jan
full_name: Schneider, Jan
id: '13209'
last_name: Schneider
orcid: 0000-0001-6401-8873
citation:
ama: Weishaupt I, Neubauer P, Schneider J. Near-infrared spectroscopy for the inline
classification and characterization of fruit juices for a product-customized flash
pasteurization. Food Science & Nutrition. 2022;10(3):800-812. doi: https://doi.org/10.1002/fsn3.2709
apa: Weishaupt, I., Neubauer, P., & Schneider, J. (2022). Near-infrared spectroscopy
for the inline classification and characterization of fruit juices for a product-customized
flash pasteurization. Food Science & Nutrition, 10(3), 800–812.
https://doi.org/
https://doi.org/10.1002/fsn3.2709
bjps: Weishaupt I, Neubauer P and Schneider J (2022) Near-Infrared Spectroscopy
for the Inline Classification and Characterization of Fruit Juices for a Product-Customized
Flash Pasteurization. Food Science & Nutrition 10, 800–812.
chicago: 'Weishaupt, Imke, Peter Neubauer, and Jan Schneider. “Near-Infrared Spectroscopy
for the Inline Classification and Characterization of Fruit Juices for a Product-Customized
Flash Pasteurization.” Food Science & Nutrition 10, no. 3 (2022): 800–812.
https://doi.org/
https://doi.org/10.1002/fsn3.2709.'
chicago-de: 'Weishaupt, Imke, Peter Neubauer und Jan Schneider. 2022. Near-infrared
spectroscopy for the inline classification and characterization of fruit juices
for a product-customized flash pasteurization. Food Science & Nutrition
10, Nr. 3: 800–812. doi:
https://doi.org/10.1002/fsn3.2709, .'
din1505-2-1: 'Weishaupt, Imke ; Neubauer, Peter ; Schneider,
Jan: Near-infrared spectroscopy for the inline classification and characterization
of fruit juices for a product-customized flash pasteurization. In: Food Science
& Nutrition Bd. 10, Wiley (2022), Nr. 3, S. 800–812'
havard: I. Weishaupt, P. Neubauer, J. Schneider, Near-infrared spectroscopy for
the inline classification and characterization of fruit juices for a product-customized
flash pasteurization, Food Science & Nutrition. 10 (2022) 800–812.
ieee: 'I. Weishaupt, P. Neubauer, and J. Schneider, “Near-infrared spectroscopy
for the inline classification and characterization of fruit juices for a product-customized
flash pasteurization,” Food Science & Nutrition, vol. 10, no. 3, pp.
800–812, 2022, doi:
https://doi.org/10.1002/fsn3.2709.'
mla: Weishaupt, Imke, et al. “Near-Infrared Spectroscopy for the Inline Classification
and Characterization of Fruit Juices for a Product-Customized Flash Pasteurization.”
Food Science & Nutrition, vol. 10, no. 3, 2022, pp. 800–12, https://doi.org/ https://doi.org/10.1002/fsn3.2709.
short: I. Weishaupt, P. Neubauer, J. Schneider, Food Science & Nutrition 10
(2022) 800–812.
ufg: 'Weishaupt, Imke/Neubauer, Peter/Schneider, Jan: Near-infrared spectroscopy
for the inline classification and characterization of fruit juices for a product-customized
flash pasteurization, in: Food Science & Nutrition 10 (2022), H. 3,
S. 800–812.'
van: Weishaupt I, Neubauer P, Schneider J. Near-infrared spectroscopy for the inline
classification and characterization of fruit juices for a product-customized flash
pasteurization. Food Science & Nutrition. 2022;10(3):800–12.
date_created: 2021-04-08T06:37:30Z
date_updated: 2025-06-26T13:32:36Z
department:
- _id: DEP4000
- _id: DEP1308
doi: ' https://doi.org/10.1002/fsn3.2709'
external_id:
isi:
- '000739093400001'
pmid:
- '35311170'
intvolume: ' 10'
isi: '1'
issue: '3'
keyword:
- flash pasteurization
- fruit juice characterization and classification
- inline near-infrared spectroscopy
- multivariate data analysis
language:
- iso: eng
page: 800-812
pmid: '1'
publication: Food Science & Nutrition
publication_identifier:
issn:
- 2048-7177
publication_status: published
publisher: Wiley
status: public
title: Near-infrared spectroscopy for the inline classification and characterization
of fruit juices for a product-customized flash pasteurization
type: journal_article
user_id: '83781'
volume: 10
year: '2022'
...
---
_id: '8380'
abstract:
- lang: eng
text: Currently, numerous single-track railway lines are disused due to economic
reasons. However, they could be reactivated for a bidirectional on-demand service
traffic by small vehicles that use only one rail. MonoCabs are such small cabin-like
vehicles, stabilized by a system of control moment gyroscopes and a moveable mass.
They could make an important contribution to improve the mobility offer especially
in rural areas. This paper is focused on the vertical stabilization system of
the MonoCab. This system is discussed based on a physical three body model which
describes the rolling motion of the vehicle, the lateral motion of the mass and
the precession motion of the gyroscope. The model is utilized for a cascaded control
concept adjusting the vehicle’s roll angle and gyroscope’s gimbal angle. The proposed
stabilization concept is capable of compensating both high dynamic disturbances
and stationary disturbances (e. g. unbalanced loads and steady wind flows). The
concept is analyzed by simulations and experimental investigations utilizing a
small scaled test rig and a rapid control prototyping system. Beside transient
command responses also the frequency response of the system is experimentally
evaluated and used for a validation of the model and theoretical findings.
author:
- first_name: Martin
full_name: Griese, Martin
id: '52308'
last_name: Griese
- first_name: Fabian
full_name: Kottmeier, Fabian
id: '55385'
last_name: Kottmeier
- first_name: Thomas
full_name: Schulte, Thomas
id: '46242'
last_name: Schulte
citation:
ama: Griese M, Kottmeier F, Schulte T. Vertical Control of a Self-Stabilizing
Monorail Vehicle. IEEE; 2021:1-6. doi:10.1109/IECON48115.2021.9589726
apa: 'Griese, M., Kottmeier, F., & Schulte, T. (2021). Vertical control of
a self-stabilizing monorail vehicle. IECON 2021 – 47th Annual Conference
of the IEEE Industrial Electronics Society (pp. 1–6). Toronto, ON, Canada
: IEEE. https://doi.org/10.1109/IECON48115.2021.9589726'
bjps: Griese M, Kottmeier F and Schulte T (2021) Vertical Control of a
Self-Stabilizing Monorail Vehicle. IEEE.
chicago: Griese, Martin, Fabian Kottmeier, and Thomas Schulte. Vertical Control
of a Self-Stabilizing Monorail Vehicle. IECON 2021 – 47th Annual Conference
of the IEEE Industrial Electronics Society. IECON 2021 – 47th Annual Conference
of the IEEE Industrial Electronics Society. IEEE, 2021. https://doi.org/10.1109/IECON48115.2021.9589726.
chicago-de: Griese, Martin, Fabian Kottmeier und Thomas Schulte. 2021. Vertical
control of a self-stabilizing monorail vehicle. IECON 2021 – 47th Annual
Conference of the IEEE Industrial Electronics Society. IECON 2021 – 47th Annual
Conference of the IEEE Industrial Electronics Society. IEEE. doi:10.1109/IECON48115.2021.9589726,
.
din1505-2-1: 'Griese, Martin ; Kottmeier, Fabian ; Schulte,
Thomas: Vertical control of a self-stabilizing monorail vehicle,
IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society :
IEEE, 2021'
havard: M. Griese, F. Kottmeier, T. Schulte, Vertical control of a self-stabilizing
monorail vehicle, IEEE, 2021.
ieee: M. Griese, F. Kottmeier, and T. Schulte, Vertical control of a self-stabilizing
monorail vehicle. IEEE, 2021, pp. 1–6.
mla: Griese, Martin, et al. “Vertical Control of a Self-Stabilizing Monorail Vehicle.”
IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society,
IEEE, 2021, pp. 1–6, doi:10.1109/IECON48115.2021.9589726.
short: M. Griese, F. Kottmeier, T. Schulte, Vertical Control of a Self-Stabilizing
Monorail Vehicle, IEEE, 2021.
ufg: 'Griese, Martin et. al. (2021): Vertical control of a self-stabilizing
monorail vehicle (=IECON 2021 – 47th Annual Conference of the IEEE Industrial
Electronics Society).'
van: Griese M, Kottmeier F, Schulte T. Vertical control of a self-stabilizing monorail
vehicle. IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics
Society. IEEE; 2021. (IECON 2021 – 47th Annual Conference of the IEEE Industrial
Electronics Society).
conference:
end_date: 2021-10-16
location: 'Toronto, ON, Canada '
name: IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society
start_date: 2021-10-13
date_created: 2022-06-22T08:45:19Z
date_updated: 2023-03-15T13:50:15Z
department:
- _id: DEP6020
- _id: DEP5022
doi: 10.1109/IECON48115.2021.9589726
keyword:
- Vehicle dynamics
- Control moment gyroscope
- Control system analysis
- Roll stabilization
- Monorail vehicles
language:
- iso: eng
page: pp. 1-6
publication: IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics
Society
publication_identifier:
isbn:
- 978-1-6654-3554-3
issn:
- '2577-1647 '
publication_status: published
publisher: IEEE
series_title: IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics
Society
status: public
title: Vertical control of a self-stabilizing monorail vehicle
type: conference_editor_article
user_id: '56955'
year: 2021
...
---
_id: '8385'
abstract:
- lang: eng
text: Currently, numerous single-track railway lines are disused due to economic
reasons. However, they could be reactivated for a bidirectional on-demand service
traffic by small vehicles that use only one rail. MonoCabs are such small cabin-like
vehicles, stabilized by a system of control moment gyroscopes and a moveable mass.
They could make an important contribution to improve the mobility offer especially
in rural areas. This paper focuses on the analytical modeling and vertical stabilization
system of the MonoCab. A nonlinear dynamic model is obtained using the Lagrangian
method and subsequently linearized about its equilibrium point. Which is used
for the design of the cascade control system. The dynamic analysis of the system
is accomplished by comparing between analytically derived model in simulink environment
and same structured model in simscape multibody. This system is discussed based
on a physical three body model which describes the rolling motion of the vehicle,
the lateral motion of the mass and the precession motion of the gyroscope. The
model is utilized for a cascaded control concept adjusting the vehicle’s roll
angle and gyroscope’s precession angle. The proposed stabilization concept is
capable of compensating both high dynamic disturbances and stationary disturbances
(e. g. unbalanced loads and steady wind flows). The concept is analyzed by simulations
and experimental investigations. Beside transient command responses also the frequency
response of the system is experimentally evaluated and used for a validation of
the model and theoretical findings. For the experimental validation, a small scaled
test rig is used which consists of mechanical frames and flywheels, inverter-fed
drives, rotary encoders, an inertial measurement unit (IMU) and a rapid control
prototyping system.
author:
- first_name: Martin
full_name: Griese, Martin
id: '52308'
last_name: Griese
- first_name: Seyed Davood
full_name: Mousavi, Seyed Davood
id: '79148'
last_name: Mousavi
- first_name: Thomas
full_name: Schulte, Thomas
id: '46242'
last_name: Schulte
citation:
ama: Griese M, Mousavi SD, Schulte T. Modeling the Vertical Dynamics of a Self-Stabilizing
Monorail Vehicle. IEEE; 2021:205-210. doi:10.1109/ICCMA54375.2021.9646219
apa: 'Griese, M., Mousavi, S. D., & Schulte, T. (2021). Modeling the Vertical
Dynamics of a Self-stabilizing Monorail Vehicle. 2021 9th International
Conference on Control, Mechatronics and Automation (ICCMA) (pp. 205–210).
Belval, Luxembourg : IEEE. https://doi.org/10.1109/ICCMA54375.2021.9646219'
bjps: Griese M, Mousavi SD and Schulte T (2021) Modeling the Vertical
Dynamics of a Self-Stabilizing Monorail Vehicle. IEEE.
chicago: Griese, Martin, Seyed Davood Mousavi, and Thomas Schulte. Modeling the
Vertical Dynamics of a Self-Stabilizing Monorail Vehicle. 2021 9th International
Conference on Control, Mechatronics and Automation (ICCMA). IEEE, 2021. https://doi.org/10.1109/ICCMA54375.2021.9646219.
chicago-de: Griese, Martin, Seyed Davood Mousavi und Thomas Schulte. 2021. Modeling
the Vertical Dynamics of a Self-stabilizing Monorail Vehicle. 2021 9th
International Conference on Control, Mechatronics and Automation (ICCMA).
IEEE. doi:10.1109/ICCMA54375.2021.9646219,
.
din1505-2-1: 'Griese, Martin ; Mousavi, Seyed Davood ; Schulte,
Thomas: Modeling the Vertical Dynamics of a Self-stabilizing Monorail
Vehicle : IEEE, 2021'
havard: M. Griese, S.D. Mousavi, T. Schulte, Modeling the Vertical Dynamics of a
Self-stabilizing Monorail Vehicle, IEEE, 2021.
ieee: M. Griese, S. D. Mousavi, and T. Schulte, Modeling the Vertical Dynamics
of a Self-stabilizing Monorail Vehicle. IEEE, 2021, pp. 205–210.
mla: Griese, Martin, et al. “Modeling the Vertical Dynamics of a Self-Stabilizing
Monorail Vehicle.” 2021 9th International Conference on Control, Mechatronics
and Automation (ICCMA), IEEE, 2021, pp. 205–10, doi:10.1109/ICCMA54375.2021.9646219.
short: M. Griese, S.D. Mousavi, T. Schulte, Modeling the Vertical Dynamics of a
Self-Stabilizing Monorail Vehicle, IEEE, 2021.
ufg: 'Griese, Martin et. al. (2021): Modeling the Vertical Dynamics of a
Self-stabilizing Monorail Vehicle.'
van: Griese M, Mousavi SD, Schulte T. Modeling the Vertical Dynamics of a Self-stabilizing
Monorail Vehicle. 2021 9th International Conference on Control, Mechatronics and
Automation (ICCMA). IEEE; 2021.
conference:
end_date: 2021-11-14
location: 'Belval, Luxembourg '
name: 2021 9th International Conference on Control, Mechatronics and Automation
(ICCMA)
start_date: 2021-11-11
date_created: 2022-06-22T14:22:07Z
date_updated: 2023-03-15T13:50:15Z
department:
- _id: DEP6020
- _id: DEP5022
doi: 10.1109/ICCMA54375.2021.9646219
keyword:
- Vehicle dynamics
- Control moment gyroscope
- Control system analysis
- Roll stabilization
- Monorail vehicles
language:
- iso: eng
page: 205-210
publication: 2021 9th International Conference on Control, Mechatronics and Automation
(ICCMA)
publication_identifier:
eisbn:
- 978-1-6654-1073-1
publication_status: published
publisher: IEEE
status: public
title: Modeling the Vertical Dynamics of a Self-stabilizing Monorail Vehicle
type: conference_editor_article
user_id: '56955'
year: 2021
...
---
_id: '6898'
abstract:
- lang: eng
text: AbstractA statistical analysis is presented
that investigates the dependence of team cities’ geographical distances on the
effect of home advantage (HA) for 57 years of the men’s German first soccer division
(“Bundesliga”), including 17,376 matches (seasons starting from 1964 to 2020).
The data shows that the HA can clearly be evidenced in the past and present (statistical
p‑value < 0.01) and that it also exists for negligible
distances (p < 0.01). The HA and the influence of
distance on the HA both significantly decreased gradually over the last decades
(p < 0.01). For the first and only time, the HA
reversed into an away advantage (AA) for the season 2019/2020 (p < 0.01).
The influence of distance on HA has been significant (p < 0.01)
in the past (before about 1990) and contributed roughly by about half, compared
to a situation without HA or AA. It increases with distance and saturates at around
100 km. Such saturation behaviour is in line with results from higher divisions
of other countries with similar travelling distances such as Italy, Turkey and
England. However, the distance-dependent contribution to HA has been approximately
halved and reduced to an insignificant amount today. Furthermore, the temporal
HA reduction is significantly larger for large distances compared to short distances
(p < 0.01). Reporting and quantifying a reduction
(p < 0.01) of the distance-dependent contribution
to HA over a time span of 57 years is novel.
article_type: original
author:
- first_name: Nils
full_name: Beckmann, Nils
id: '62068'
last_name: Beckmann
orcid: 0000-0003-4337-7978
citation:
ama: Beckmann N. Statistical influence of travelling distance on home advantage
over 57 years in the men’s German first soccer division. German Journal of
Exercise and Sport Research. 2021. doi:10.1007/s12662-021-00787-7
apa: Beckmann, N. (2021). Statistical influence of travelling distance on home advantage
over 57 years in the men’s German first soccer division. German Journal of
Exercise and Sport Research. https://doi.org/10.1007/s12662-021-00787-7
bjps: Beckmann N (2021) Statistical Influence of Travelling Distance on Home
Advantage over 57 Years in the Men’s German First Soccer Division. German Journal
of Exercise and Sport Research.
chicago: Beckmann, Nils. “Statistical Influence of Travelling Distance on Home Advantage
over 57 Years in the Men’s German First Soccer Division.” German Journal of
Exercise and Sport Research, 2021. https://doi.org/10.1007/s12662-021-00787-7.
chicago-de: Beckmann, Nils. 2021. Statistical influence of travelling distance on
home advantage over 57 years in the men’s German first soccer division. German
Journal of Exercise and Sport Research. doi:10.1007/s12662-021-00787-7,
.
din1505-2-1: 'Beckmann, Nils: Statistical
influence of travelling distance on home advantage over 57 years in the men’s
German first soccer division. In: German Journal of Exercise and Sport Research
(2021)'
havard: N. Beckmann, Statistical influence of travelling distance on home advantage
over 57 years in the men’s German first soccer division, German Journal of Exercise
and Sport Research. (2021).
ieee: N. Beckmann, “Statistical influence of travelling distance on home advantage
over 57 years in the men’s German first soccer division,” German Journal of
Exercise and Sport Research, 2021.
mla: Beckmann, Nils. “Statistical Influence of Travelling Distance on Home Advantage
over 57 Years in the Men’s German First Soccer Division.” German Journal of
Exercise and Sport Research, 2021, doi:10.1007/s12662-021-00787-7.
short: N. Beckmann, German Journal of Exercise and Sport Research (2021).
ufg: 'Beckmann, Nils (2021): Statistical influence of travelling distance
on home advantage over 57 years in the men’s German first soccer division, in:
German Journal of Exercise and Sport Research.'
van: Beckmann N. Statistical influence of travelling distance on home advantage
over 57 years in the men’s German first soccer division. German Journal of Exercise
and Sport Research. 2021;
date_created: 2021-12-14T15:46:58Z
date_updated: 2023-03-15T13:50:08Z
ddc:
- '310'
doi: 10.1007/s12662-021-00787-7
file:
- access_level: open_access
content_type: application/pdf
creator: det-ysu
date_created: 2021-12-14T15:48:41Z
date_updated: 2021-12-14T15:48:41Z
file_id: '6899'
file_name: Beckmann2021_Article_StatisticalInfluenceOfTravelli.pdf
file_size: 729989
relation: main_file
success: 1
file_date_updated: 2021-12-14T15:48:41Z
has_accepted_license: '1'
keyword:
- Statistical analysis
- Historic development
- Geographical distance
- Team performance
- Home and away match results
- Home advantage decline
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://link.springer.com/article/10.1007%2Fs12662-021-00787-7
oa: '1'
publication: German Journal of Exercise and Sport Research
publication_identifier:
issn:
- 2509-3142
- 2509-3150
publication_status: published
quality_controlled: '1'
status: public
title: Statistical influence of travelling distance on home advantage over 57 years
in the men’s German first soccer division
type: journal_article
user_id: '62068'
year: 2021
...
---
_id: '1903'
abstract:
- lang: eng
text: Because of the trend towards smaller batch sizes and customer-specific products,
employees in assembly have to absorb and process more and more information. With
the help of assistance systems, the process of information absorption and processing
can be designed in a more economical and human-oriented way. Despite the potentials
of such systems, companies pay too little attention to the informational design
of assembly systems, resulting in a number of significant deficits in information
management. To identify such deficits in operational practice, a questionnaire
has been developed. This allows the potential use of informational assistance
systems for an assembly system to be estimated. In this article, results from
an exploratory factor analysis of the developed instrument will be presented and
interpreted as a basis for the further development of the questionnaire.
author:
- first_name: Sven
full_name: Bendzioch, Sven
id: '71395'
last_name: Bendzioch
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Benjamin
full_name: Adrian, Benjamin
id: '42266'
last_name: Adrian
- first_name: Manfred
full_name: Bornewasser, Manfred
last_name: Bornewasser
citation:
ama: 'Bendzioch S, Hinrichsen S, Adrian B, Bornewasser M. Method for Measuring the
Application Potential of Assembly Assistance Systems. In: Nunes IL, ed. Advances
in Human Factors and Systems Interaction AHFE 2019. Vol 959. Advances in Intelligent
Systems and Computing. Cham: Springer; 2020:3-11. doi:https://doi.org/10.1007/978-3-030-20040-4_1'
apa: 'Bendzioch, S., Hinrichsen, S., Adrian, B., & Bornewasser, M. (2020). Method
for Measuring the Application Potential of Assembly Assistance Systems. In I.
L. Nunes (Ed.), Advances in Human Factors and Systems Interaction AHFE 2019
(Vol. 959, pp. 3–11). Cham: Springer. https://doi.org/10.1007/978-3-030-20040-4_1'
bjps: 'Bendzioch S et al. (2020) Method for Measuring the Application
Potential of Assembly Assistance Systems. In Nunes IL (ed.), Advances in Human
Factors and Systems Interaction AHFE 2019, vol. 959. Cham: Springer, pp. 3–11.'
chicago: 'Bendzioch, Sven, Sven Hinrichsen, Benjamin Adrian, and Manfred Bornewasser.
“Method for Measuring the Application Potential of Assembly Assistance Systems.”
In Advances in Human Factors and Systems Interaction AHFE 2019, edited
by Isabel L. Nunes, 959:3–11. Advances in Intelligent Systems and Computing. Cham:
Springer, 2020. https://doi.org/10.1007/978-3-030-20040-4_1.'
chicago-de: 'Bendzioch, Sven, Sven Hinrichsen, Benjamin Adrian und Manfred Bornewasser.
2020. Method for Measuring the Application Potential of Assembly Assistance Systems.
In: Advances in Human Factors and Systems Interaction AHFE 2019, hg. von
Isabel L. Nunes, 959:3–11. Advances in Intelligent Systems and Computing. Cham:
Springer. doi:https://doi.org/10.1007/978-3-030-20040-4_1,
.'
din1505-2-1: 'Bendzioch, Sven ; Hinrichsen, Sven ; Adrian,
Benjamin ; Bornewasser, Manfred:
Method for Measuring the Application Potential of Assembly Assistance Systems.
In: Nunes, I. L. (Hrsg.): Advances
in Human Factors and Systems Interaction AHFE 2019, Advances in Intelligent
Systems and Computing. Bd. 959. Cham : Springer, 2020, S. 3–11'
havard: 'S. Bendzioch, S. Hinrichsen, B. Adrian, M. Bornewasser, Method for Measuring
the Application Potential of Assembly Assistance Systems, in: I.L. Nunes (Ed.),
Advances in Human Factors and Systems Interaction AHFE 2019, Springer, Cham, 2020:
pp. 3–11.'
ieee: S. Bendzioch, S. Hinrichsen, B. Adrian, and M. Bornewasser, “Method for Measuring
the Application Potential of Assembly Assistance Systems,” in Advances in Human
Factors and Systems Interaction AHFE 2019, Washington D.C., USA, 2020, vol.
959, pp. 3–11.
mla: Bendzioch, Sven, et al. “Method for Measuring the Application Potential of
Assembly Assistance Systems.” Advances in Human Factors and Systems Interaction
AHFE 2019, edited by Isabel L. Nunes, vol. 959, Springer, 2020, pp. 3–11,
doi:https://doi.org/10.1007/978-3-030-20040-4_1.
short: 'S. Bendzioch, S. Hinrichsen, B. Adrian, M. Bornewasser, in: I.L. Nunes (Ed.),
Advances in Human Factors and Systems Interaction AHFE 2019, Springer, Cham, 2020,
pp. 3–11.'
ufg: 'Bendzioch, Sven et. al. (2020): Method for Measuring the Application
Potential of Assembly Assistance Systems, in: Isabel L. Nunes (Hg.): Advances
in Human Factors and Systems Interaction AHFE 2019 (=Advances in Intelligent
Systems and Computing 959), Cham, S. 3–11.'
van: 'Bendzioch S, Hinrichsen S, Adrian B, Bornewasser M. Method for Measuring the
Application Potential of Assembly Assistance Systems. In: Nunes IL, editor. Advances
in Human Factors and Systems Interaction AHFE 2019. Cham: Springer; 2020. p. 3–11.
(Advances in Intelligent Systems and Computing; vol. 959).'
conference:
end_date: 2019-07-28
location: Washington D.C., USA
name: 10th International Conference on Applied Human Factors and Ergonomics 2019
start_date: 2019-07-24
date_created: 2019-09-10T06:38:20Z
date_updated: 2023-03-15T13:49:37Z
department:
- _id: DEP7020
- _id: DEP1305
doi: https://doi.org/10.1007/978-3-030-20040-4_1
editor:
- first_name: Isabel L.
full_name: Nunes, Isabel L.
last_name: Nunes
intvolume: ' 959'
keyword:
- Complexity evaluation
- Manual assembly
- Questionnaire
- Work analysis method
- Assistance systems
- Exploratory factor analysis
language:
- iso: eng
page: 3-11
place: Cham
project:
- _id: FBB6D104-44D9-11E9-AA25-B54CDB794CE1
name: Montexas 4.0
publication: Advances in Human Factors and Systems Interaction AHFE 2019
publication_identifier:
eisbn:
- 978-3-030-20040-4
isbn:
- 978-3-030-20039-8
publication_status: published
publisher: Springer
quality_controlled: '1'
series_title: Advances in Intelligent Systems and Computing
status: public
title: Method for Measuring the Application Potential of Assembly Assistance Systems
type: conference
user_id: '49010'
volume: 959
year: 2020
...
---
_id: '5424'
abstract:
- lang: eng
text: Near infrared spectroscopy in combination with a transflection probe was investigated
as inline measurement in a continuous flash pasteurizer system with a sugar-water
model solution. Robustness and reproducibility of fluctuations of recorded spectra
as well as trueness of the chemometric analysis were compared under different
process parameter settings. Variable parameters were the flow rate (from laminar
flow at 30 L/h to turbulent flow at 90 L/h), temperature (20 to 100 degrees C)
and the path length of the transflection probe (2 and 4 mm) while the pressure
was kept constant at 2.5 bar. Temperature and path length were identified as the
most affecting parameters, in case of homogenous test medium. In case of particle
containing systems, the flow rate could have an impact as well. However, the application
of a PLS model, which includes a broad temperature range, and the correction of
prediction results by applying a polynomial regression function for prediction
errors, was able to compensate these effects. Also, a path length of 2 mm leads
to a higher accuracy. The applied strategy shows that by the identification of
relevant process parameters and settings as well as the establishment of a compensation
strategy, near infrared spectroscopy is a powerful process analytical tool for
continuous flash pasteurization systems.
author:
- first_name: Imke
full_name: Weishaupt, Imke
id: '58425'
last_name: Weishaupt
- first_name: Manuel
full_name: Zimmer, Manuel
id: '71613'
last_name: Zimmer
orcid: 0000-0002-9974-2543
- first_name: Peter
full_name: Neubauer, Peter
last_name: Neubauer
- first_name: Jan
full_name: Schneider, Jan
id: '13209'
last_name: Schneider
orcid: 0000-0001-6401-8873
citation:
ama: Weishaupt I, Zimmer M, Neubauer P, Schneider J. Model based optimization of
transflection near infrared spectroscopy as a process analytical tool in a continuous
flash pasteurizer. Journal of Food Science. 2020;85(7):2020-2031. doi:10.1111/1750-3841.15307
apa: Weishaupt, I., Zimmer, M., Neubauer, P., & Schneider, J. (2020). Model
based optimization of transflection near infrared spectroscopy as a process analytical
tool in a continuous flash pasteurizer. Journal of Food Science, 85(7),
2020–2031. https://doi.org/10.1111/1750-3841.15307
bjps: Weishaupt I et al. (2020) Model Based Optimization of Transflection
near Infrared Spectroscopy as a Process Analytical Tool in a Continuous Flash
Pasteurizer. Journal of Food Science 85, 2020–2031.
chicago: 'Weishaupt, Imke, Manuel Zimmer, Peter Neubauer, and Jan Schneider. “Model
Based Optimization of Transflection near Infrared Spectroscopy as a Process Analytical
Tool in a Continuous Flash Pasteurizer.” Journal of Food Science 85, no.
7 (2020): 2020–31. https://doi.org/10.1111/1750-3841.15307.'
chicago-de: 'Weishaupt, Imke, Manuel Zimmer, Peter Neubauer und Jan Schneider. 2020.
Model based optimization of transflection near infrared spectroscopy as a process
analytical tool in a continuous flash pasteurizer. Journal of Food Science
85, Nr. 7: 2020–2031. doi:10.1111/1750-3841.15307,
.'
din1505-2-1: 'Weishaupt, Imke ; Zimmer, Manuel ; Neubauer,
Peter ; Schneider, Jan: Model
based optimization of transflection near infrared spectroscopy as a process analytical
tool in a continuous flash pasteurizer. In: Journal of Food Science Bd.
85 (2020), Nr. 7, S. 2020–2031'
havard: I. Weishaupt, M. Zimmer, P. Neubauer, J. Schneider, Model based optimization
of transflection near infrared spectroscopy as a process analytical tool in a
continuous flash pasteurizer, Journal of Food Science. 85 (2020) 2020–2031.
ieee: 'I. Weishaupt, M. Zimmer, P. Neubauer, and J. Schneider, “Model based optimization
of transflection near infrared spectroscopy as a process analytical tool in a
continuous flash pasteurizer,” Journal of Food Science, vol. 85, no. 7,
pp. 2020–2031, 2020, doi: 10.1111/1750-3841.15307.'
mla: Weishaupt, Imke, et al. “Model Based Optimization of Transflection near Infrared
Spectroscopy as a Process Analytical Tool in a Continuous Flash Pasteurizer.”
Journal of Food Science, vol. 85, no. 7, 2020, pp. 2020–31, https://doi.org/10.1111/1750-3841.15307.
short: I. Weishaupt, M. Zimmer, P. Neubauer, J. Schneider, Journal of Food Science
85 (2020) 2020–2031.
ufg: 'Weishaupt, Imke u. a.: Model based optimization of transflection near
infrared spectroscopy as a process analytical tool in a continuous flash pasteurizer,
in: Journal of Food Science 85 (2020), H. 7, S. 2020–2031.'
van: Weishaupt I, Zimmer M, Neubauer P, Schneider J. Model based optimization of
transflection near infrared spectroscopy as a process analytical tool in a continuous
flash pasteurizer. Journal of Food Science. 2020;85(7):2020–31.
date_created: 2021-04-08T06:37:30Z
date_updated: 2025-06-26T13:30:26Z
department:
- _id: DEP1308
- _id: DEP4018
doi: 10.1111/1750-3841.15307
external_id:
isi:
- '000543977000001'
pmid:
- '32602154'
intvolume: ' 85'
isi: '1'
issue: '7'
keyword:
- flash pasteurization
- inline near infrared spectroscopy
- multivariate data analysis
- process condition influences
- sugar-water-solution model beverage
language:
- iso: eng
page: 2020 - 2031
pmid: '1'
publication: Journal of Food Science
publication_identifier:
eissn:
- 1750-3841
isbn:
- 0022-1147
publication_status: published
status: public
title: Model based optimization of transflection near infrared spectroscopy as a process
analytical tool in a continuous flash pasteurizer
type: journal_article
user_id: '83781'
volume: 85
year: '2020'
...
---
_id: '12835'
abstract:
- lang: eng
text: Delayed-release dosage forms are mainly manufactured as batch processes and
include coated tablets, pellets, or particles with gastric resistant polymers.
Authors propose a novel approach using the hot-melt extrusion technique to prepare
delayed release dosage forms via a continuous manufacturing process, a new trend
in the pharmaceutical industry. A full factorial design was employed to correlate
input variables, including stearic acid (SA) content, drug content, and pellet
size with drug release properties of the pellets. PLS fit method suitably elaborated
the relationship between input and output variables with reasonably good fit and
goodness of prediction. All three input factors influenced drug release in enzyme-free
simulated gastric fluid (SGF) after 120 min; however, SA content did not significantly
affect drug dissolution in the enzyme-free simulated intestinal fluid (SIF). An
optimized formulation and design space were determined by overlaying multiple
contours established from regression equations. The continuous manufacturing process
was successfully monitored using inline near-infrared (NIR) and inline particle
size analysis, with drug load and pellet size being well-controlled within the
design space. The obtained pellets released less than 5% after 120 min in SGF
and more than 85% and 95% after 30 min and 45 min, respectively, after switching
to SIF. (C) 2020 American Pharmacists Association (R). Published by Elsevier Inc.
All rights reserved.
author:
- first_name: Anh Q.
full_name: Vo, Anh Q.
last_name: Vo
- first_name: Gerd
full_name: Kutz, Gerd
id: '12015'
last_name: Kutz
- first_name: Herman
full_name: He, Herman
last_name: He
- first_name: Sagar
full_name: Narala, Sagar
last_name: Narala
- first_name: Suresh
full_name: Bandari, Suresh
last_name: Bandari
- first_name: Michael A.
full_name: Repka, Michael A.
last_name: Repka
citation:
ama: 'Vo AQ, Kutz G, He H, Narala S, Bandari S, Repka MA. Continuous Manufacturing
of Ketoprofen Delayed Release Pellets Using Melt Extrusion Technology: Application
of QbD Design Space, Inline Near Infrared, and Inline Pellet Size Analysis. Journal
of Pharmaceutical Sciences. 2020;109(12):3598-3607. doi:10.1016/j.xphs.2020.09.007'
apa: 'Vo, A. Q., Kutz, G., He, H., Narala, S., Bandari, S., & Repka, M. A. (2020).
Continuous Manufacturing of Ketoprofen Delayed Release Pellets Using Melt Extrusion
Technology: Application of QbD Design Space, Inline Near Infrared, and Inline
Pellet Size Analysis. Journal of Pharmaceutical Sciences, 109(12),
3598–3607. https://doi.org/10.1016/j.xphs.2020.09.007'
bjps: 'Vo AQ et al. (2020) Continuous Manufacturing of Ketoprofen
Delayed Release Pellets Using Melt Extrusion Technology: Application of QbD Design
Space, Inline Near Infrared, and Inline Pellet Size Analysis. Journal of Pharmaceutical
Sciences 109, 3598–3607.'
chicago: 'Vo, Anh Q., Gerd Kutz, Herman He, Sagar Narala, Suresh Bandari, and Michael
A. Repka. “Continuous Manufacturing of Ketoprofen Delayed Release Pellets Using
Melt Extrusion Technology: Application of QbD Design Space, Inline Near Infrared,
and Inline Pellet Size Analysis.” Journal of Pharmaceutical Sciences 109,
no. 12 (2020): 3598–3607. https://doi.org/10.1016/j.xphs.2020.09.007.'
chicago-de: 'Vo, Anh Q., Gerd Kutz, Herman He, Sagar Narala, Suresh Bandari und
Michael A. Repka. 2020. Continuous Manufacturing of Ketoprofen Delayed Release
Pellets Using Melt Extrusion Technology: Application of QbD Design Space, Inline
Near Infrared, and Inline Pellet Size Analysis. Journal of Pharmaceutical Sciences
109, Nr. 12: 3598–3607. doi:10.1016/j.xphs.2020.09.007,
.'
din1505-2-1: 'Vo, Anh Q. ; Kutz,
Gerd ; He, Herman ; Narala, Sagar ; Bandari,
Suresh ; Repka, Michael A.:
Continuous Manufacturing of Ketoprofen Delayed Release Pellets Using Melt Extrusion
Technology: Application of QbD Design Space, Inline Near Infrared, and Inline
Pellet Size Analysis. In: Journal of Pharmaceutical Sciences Bd. 109. Amsterdam
[u.a.], Elsevier BV (2020), Nr. 12, S. 3598–3607'
havard: 'A.Q. Vo, G. Kutz, H. He, S. Narala, S. Bandari, M.A. Repka, Continuous
Manufacturing of Ketoprofen Delayed Release Pellets Using Melt Extrusion Technology:
Application of QbD Design Space, Inline Near Infrared, and Inline Pellet Size
Analysis, Journal of Pharmaceutical Sciences. 109 (2020) 3598–3607.'
ieee: 'A. Q. Vo, G. Kutz, H. He, S. Narala, S. Bandari, and M. A. Repka, “Continuous
Manufacturing of Ketoprofen Delayed Release Pellets Using Melt Extrusion Technology:
Application of QbD Design Space, Inline Near Infrared, and Inline Pellet Size
Analysis,” Journal of Pharmaceutical Sciences, vol. 109, no. 12, pp. 3598–3607,
2020, doi: 10.1016/j.xphs.2020.09.007.'
mla: 'Vo, Anh Q., et al. “Continuous Manufacturing of Ketoprofen Delayed Release
Pellets Using Melt Extrusion Technology: Application of QbD Design Space, Inline
Near Infrared, and Inline Pellet Size Analysis.” Journal of Pharmaceutical
Sciences, vol. 109, no. 12, 2020, pp. 3598–607, https://doi.org/10.1016/j.xphs.2020.09.007.'
short: A.Q. Vo, G. Kutz, H. He, S. Narala, S. Bandari, M.A. Repka, Journal of Pharmaceutical
Sciences 109 (2020) 3598–3607.
ufg: 'Vo, Anh Q. u. a.: Continuous Manufacturing of Ketoprofen Delayed Release
Pellets Using Melt Extrusion Technology: Application of QbD Design Space, Inline
Near Infrared, and Inline Pellet Size Analysis, in: Journal of Pharmaceutical
Sciences 109 (2020), H. 12, S. 3598–3607.'
van: 'Vo AQ, Kutz G, He H, Narala S, Bandari S, Repka MA. Continuous Manufacturing
of Ketoprofen Delayed Release Pellets Using Melt Extrusion Technology: Application
of QbD Design Space, Inline Near Infrared, and Inline Pellet Size Analysis. Journal
of Pharmaceutical Sciences. 2020;109(12):3598–607.'
date_created: 2025-04-23T08:40:12Z
date_updated: 2025-06-26T13:25:32Z
department:
- _id: DEP4028
doi: 10.1016/j.xphs.2020.09.007
external_id:
isi:
- '000590406100010'
intvolume: ' 109'
isi: '1'
issue: '12'
keyword:
- Continuous manufacturing
- Delayed-release
- FT-NIR
- Inline particle size analysis
- Hot melt extrusion
language:
- iso: eng
page: 3598-3607
place: Amsterdam [u.a.]
publication: Journal of Pharmaceutical Sciences
publication_identifier:
eissn:
- 1520-6017
issn:
- 0022-3549
publication_status: published
publisher: Elsevier BV
status: public
title: 'Continuous Manufacturing of Ketoprofen Delayed Release Pellets Using Melt
Extrusion Technology: Application of QbD Design Space, Inline Near Infrared, and
Inline Pellet Size Analysis'
type: scientific_journal_article
user_id: '83781'
volume: 109
year: '2020'
...
---
_id: '2005'
abstract:
- lang: eng
text: We present a method for the fast and robust linear classification of badly
conditioned data. In our considerations, badly conditioned data are such data
which are numerically difficult to handle. Due to, e.g. a large number of features
or a large number of objects representing classes as well as noise, outliers or
incompleteness, the common software computation of the discriminating linear combination
of features between classes fails or is extremely time consuming. The theoretical
foundations of our approach are based on the single feature ranking, which allows
fast calculation of the approximative initial classification boundary. For the
increasing of classification accuracy of this boundary, the refinement is performed
in the lower dimensional space. Our approach is tested on several datasets from
UCI Reposi-tiory. Experimental results indicate high classification accuracy of
the approach. For the modern real industrial applications such a method is especially
suitable in the Cyber-Physical-System environments and provides a part of the
workflow for the automated classifier design
author:
- first_name: Helene
full_name: Dörksen, Helene
id: '46416'
last_name: Dörksen
- first_name: Volker
full_name: Lohweg, Volker
id: '1804'
last_name: Lohweg
orcid: 0000-0002-3325-7887
citation:
ama: 'Dörksen H, Lohweg V. Linear Classification of Badly Conditioned Data. . In:
23rd IEEE International Conference on Emerging Technologies and Factory Automation
(ETFA). Torino, Italy; 2018. doi:10.1109/ETFA.2018.8502485'
apa: Dörksen, H., & Lohweg, V. (2018). Linear Classification of Badly Conditioned
Data. . In 23rd IEEE International Conference on Emerging Technologies and
Factory Automation (ETFA). Torino, Italy. https://doi.org/10.1109/ETFA.2018.8502485
bjps: Dörksen H and Lohweg V (2018) Linear Classification of Badly Conditioned
Data. . 23rd IEEE International Conference on Emerging Technologies and Factory
Automation (ETFA). Torino, Italy.
chicago: Dörksen, Helene, and Volker Lohweg. “Linear Classification of Badly Conditioned
Data. .” In 23rd IEEE International Conference on Emerging Technologies and
Factory Automation (ETFA). Torino, Italy, 2018. https://doi.org/10.1109/ETFA.2018.8502485.
chicago-de: 'Dörksen, Helene und Volker Lohweg. 2018. Linear Classification of Badly
Conditioned Data. . In: 23rd IEEE International Conference on Emerging Technologies
and Factory Automation (ETFA). Torino, Italy. doi:10.1109/ETFA.2018.8502485,
.'
din1505-2-1: 'Dörksen, Helene ; Lohweg, Volker: Linear Classification
of Badly Conditioned Data. . In: 23rd IEEE International Conference on Emerging
Technologies and Factory Automation (ETFA). Torino, Italy, 2018'
havard: 'H. Dörksen, V. Lohweg, Linear Classification of Badly Conditioned Data.
, in: 23rd IEEE International Conference on Emerging Technologies and Factory
Automation (ETFA), Torino, Italy, 2018.'
ieee: H. Dörksen and V. Lohweg, “Linear Classification of Badly Conditioned Data.
,” in 23rd IEEE International Conference on Emerging Technologies and Factory
Automation (ETFA), Turin, Italy , 2018.
mla: Dörksen, Helene, and Volker Lohweg. “Linear Classification of Badly Conditioned
Data. .” 23rd IEEE International Conference on Emerging Technologies and Factory
Automation (ETFA), 2018, doi:10.1109/ETFA.2018.8502485.
short: 'H. Dörksen, V. Lohweg, in: 23rd IEEE International Conference on Emerging
Technologies and Factory Automation (ETFA), Torino, Italy, 2018.'
ufg: 'Dörksen, Helene/Lohweg, Volker (2018): Linear Classification of Badly
Conditioned Data. , in: 23rd IEEE International Conference on Emerging Technologies
and Factory Automation (ETFA), Torino, Italy.'
van: 'Dörksen H, Lohweg V. Linear Classification of Badly Conditioned Data. . In:
23rd IEEE International Conference on Emerging Technologies and Factory Automation
(ETFA). Torino, Italy; 2018.'
conference:
end_date: 2018-09-07
location: ' Turin, Italy '
name: ' IEEE 23rd International Conference on Emerging Technologies and Factory
Automation (ETFA) 2018'
start_date: 2018-09-04
date_created: 2019-11-25T08:35:44Z
date_updated: 2023-03-15T13:49:38Z
department:
- _id: DEP5023
doi: 10.1109/ETFA.2018.8502485
keyword:
- Task analysis
- Software
- Linear discriminant analysis
- Dimensionality reduction
- Mathematical model
- Covariance matrices
- Measurement
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8502485
oa: '1'
place: Torino, Italy
publication: 23rd IEEE International Conference on Emerging Technologies and Factory
Automation (ETFA)
status: public
title: 'Linear Classification of Badly Conditioned Data. '
type: conference
user_id: '15514'
year: 2018
...
---
_id: '2008'
abstract:
- lang: eng
text: "We concentrate our research activities on the multivariate feature selection,
which is one important part of many machine learning tasks. In partucular, Linear
Discriminant Analysis [1] belongs to the state-of-the-art methods for the multivariate
analysis. From the theoretical point of view, it is the well-known fact that LDA
is best suitable in the case the features are Gaussian distributed.\r\nIn the
theoretical part of the presented paper, we analyse the properties of the multivariate
discriminant analysis with respect to the feature selection. In this context,
we consider a binary supervised learning task and assume that the features are
Gaussian distributed. The discriminant analysis solves the mentioned supervised
learning task by maximising of the discriminant value, calculated for the linear
combination of the features.\r\nThe initial LDA solution a 2 Rd is considered
for all given features from the feature space X \x1A Rd. The corresponding discriminant
is calculated by the formula:\r\nd(a; x1, . . . , xd) := (μ+ − μ−)2\r\n\e2+\r\n+
\e2−\r\n,\r\nwhere μ+/− are projected class means and \e2 +/− are projected class
variances (with respect to a). We proof several propositions with the aim to find
subsets of the features having higher discriminant value as original d(a; x1,
. . . , xd). For the suitability in the real world settings, here we are interested
in fast searching for such subsets.\r\nThe performance of the mentioned propositions
is examined experimentally on datasets from UCI repository [2]. Several application
scenarien will be discussed and tested on the datasets. In addition, tests show
that the performance can be achieved also in the case the features are not Gaussian
distributed."
author:
- first_name: Helene
full_name: Dörksen, Helene
id: '46416'
last_name: Dörksen
- first_name: Volker
full_name: Lohweg, Volker
id: '1804'
last_name: Lohweg
orcid: 0000-0002-3325-7887
citation:
ama: 'Dörksen H, Lohweg V. Multivariate Gaussian Feature Selection. . In: European
Conference on Data Analysis (ECDA2018). Paderborn, Germany; 2018.'
apa: Dörksen, H., & Lohweg, V. (2018). Multivariate Gaussian Feature Selection.
. In European Conference on Data Analysis (ECDA2018). Paderborn, Germany.
bjps: Dörksen H and Lohweg V (2018) Multivariate Gaussian Feature Selection.
. European Conference on Data Analysis (ECDA2018). Paderborn, Germany.
chicago: Dörksen, Helene, and Volker Lohweg. “Multivariate Gaussian Feature Selection.
.” In European Conference on Data Analysis (ECDA2018). Paderborn, Germany,
2018.
chicago-de: 'Dörksen, Helene und Volker Lohweg. 2018. Multivariate Gaussian Feature
Selection. . In: European Conference on Data Analysis (ECDA2018). Paderborn,
Germany.'
din1505-2-1: 'Dörksen, Helene ; Lohweg, Volker: Multivariate Gaussian
Feature Selection. . In: European Conference on Data Analysis (ECDA2018).
Paderborn, Germany, 2018'
havard: 'H. Dörksen, V. Lohweg, Multivariate Gaussian Feature Selection. , in: European
Conference on Data Analysis (ECDA2018), Paderborn, Germany, 2018.'
ieee: H. Dörksen and V. Lohweg, “Multivariate Gaussian Feature Selection. ,” in
European Conference on Data Analysis (ECDA2018), Paderborn, 2018.
mla: Dörksen, Helene, and Volker Lohweg. “Multivariate Gaussian Feature Selection.
.” European Conference on Data Analysis (ECDA2018), 2018.
short: 'H. Dörksen, V. Lohweg, in: European Conference on Data Analysis (ECDA2018),
Paderborn, Germany, 2018.'
ufg: 'Dörksen, Helene/Lohweg, Volker (2018): Multivariate Gaussian Feature
Selection. , in: European Conference on Data Analysis (ECDA2018), Paderborn,
Germany.'
van: 'Dörksen H, Lohweg V. Multivariate Gaussian Feature Selection. . In: European
Conference on Data Analysis (ECDA2018). Paderborn, Germany; 2018.'
conference:
end_date: 2018-07-06
location: Paderborn
name: European Conference on Data Analysis
start_date: 2018-07-04
date_created: 2019-11-25T08:35:48Z
date_updated: 2023-03-15T13:49:38Z
department:
- _id: DEP5023
keyword:
- multivariate feature selection
- Gaussian distribution
- linear discriminant analysis
language:
- iso: eng
place: Paderborn, Germany
publication: European Conference on Data Analysis (ECDA2018)
status: public
title: 'Multivariate Gaussian Feature Selection. '
type: conference
user_id: '15514'
year: 2018
...
---
_id: '10668'
abstract:
- lang: eng
text: Digitalization has a significant impact on our working life and it allows
whole industries to rethink their value chains. This paper examines how digitalization
relates to complexity in work systems with respect to relevant organizational
fields of work organization. 23 semi-structured interviews with experts from science
and economy were conducted and analyzed. Key findings are that digitalization
has far-reaching, interrelated implications for all organizational fields. Moreover,
digitalization-related aspects were identified which have the potential to increase
complexity in work systems.
author:
- first_name: Benedikt
full_name: Latos, Benedikt
id: '84474'
last_name: Latos
- first_name: Markus
full_name: Harlacher, Markus
last_name: Harlacher
- first_name: Philipp M.
full_name: Przybysz, Philipp M.
last_name: Przybysz
- first_name: Susanne
full_name: Mutze-Niewohner, Susanne
last_name: Mutze-Niewohner
citation:
ama: 'Latos B, Harlacher M, Przybysz PM, Mutze-Niewohner S. Transformation of working
environments through digitalization: Exploration and systematization of complexity
drivers. In: 2017 IEEE International Conference on Industrial Engineering and
Engineering Management (IEEM). IEEE; 2018. doi:10.1109/ieem.2017.8290059'
apa: 'Latos, B., Harlacher, M., Przybysz, P. M., & Mutze-Niewohner, S. (2018).
Transformation of working environments through digitalization: Exploration and
systematization of complexity drivers. 2017 IEEE International Conference on
Industrial Engineering and Engineering Management (IEEM). 2017 IEEE International
Conference on Industrial Engineering and Engineering Management (IEEM), Singapore.
https://doi.org/10.1109/ieem.2017.8290059'
bjps: 'Latos B et al. (2018) Transformation of Working Environments
through Digitalization: Exploration and Systematization of Complexity Drivers.
2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM). IEEE.'
chicago: 'Latos, Benedikt, Markus Harlacher, Philipp M. Przybysz, and Susanne Mutze-Niewohner.
“Transformation of Working Environments through Digitalization: Exploration and
Systematization of Complexity Drivers.” In 2017 IEEE International Conference
on Industrial Engineering and Engineering Management (IEEM). IEEE, 2018. https://doi.org/10.1109/ieem.2017.8290059.'
chicago-de: 'Latos, Benedikt, Markus Harlacher, Philipp M. Przybysz und Susanne
Mutze-Niewohner. 2018. Transformation of working environments through digitalization:
Exploration and systematization of complexity drivers. In: 2017 IEEE International
Conference on Industrial Engineering and Engineering Management (IEEM). IEEE.
doi:10.1109/ieem.2017.8290059,
.'
din1505-2-1: 'Latos, Benedikt ; Harlacher, Markus ; Przybysz,
Philipp M. ; Mutze-Niewohner, Susanne:
Transformation of working environments through digitalization: Exploration and
systematization of complexity drivers. In: 2017 IEEE International Conference
on Industrial Engineering and Engineering Management (IEEM) : IEEE, 2018'
havard: 'B. Latos, M. Harlacher, P.M. Przybysz, S. Mutze-Niewohner, Transformation
of working environments through digitalization: Exploration and systematization
of complexity drivers, in: 2017 IEEE International Conference on Industrial Engineering
and Engineering Management (IEEM), IEEE, 2018.'
ieee: 'B. Latos, M. Harlacher, P. M. Przybysz, and S. Mutze-Niewohner, “Transformation
of working environments through digitalization: Exploration and systematization
of complexity drivers,” presented at the 2017 IEEE International Conference on
Industrial Engineering and Engineering Management (IEEM), Singapore, 2018. doi:
10.1109/ieem.2017.8290059.'
mla: 'Latos, Benedikt, et al. “Transformation of Working Environments through Digitalization:
Exploration and Systematization of Complexity Drivers.” 2017 IEEE International
Conference on Industrial Engineering and Engineering Management (IEEM), IEEE,
2018, https://doi.org/10.1109/ieem.2017.8290059.'
short: 'B. Latos, M. Harlacher, P.M. Przybysz, S. Mutze-Niewohner, in: 2017 IEEE
International Conference on Industrial Engineering and Engineering Management
(IEEM), IEEE, 2018.'
ufg: 'Latos, Benedikt u. a.: Transformation of working environments through
digitalization: Exploration and systematization of complexity drivers, in: o. Hg.:
2017 IEEE International Conference on Industrial Engineering and Engineering Management
(IEEM), o. O. 2018.'
van: 'Latos B, Harlacher M, Przybysz PM, Mutze-Niewohner S. Transformation of working
environments through digitalization: Exploration and systematization of complexity
drivers. In: 2017 IEEE International Conference on Industrial Engineering and
Engineering Management (IEEM). IEEE; 2018.'
conference:
end_date: 2017-12-13
location: Singapore
name: 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM)
start_date: 2017-12-10
date_created: 2023-10-30T13:02:52Z
date_updated: 2023-10-31T11:24:15Z
department:
- _id: DEP1522
doi: 10.1109/ieem.2017.8290059
extern: '1'
keyword:
- Complexity theory
- Interviews
- Organizations
- Industries
- Task analysis
- Acceleration
language:
- iso: eng
publication: 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM)
publication_identifier:
eissn:
- 2157-362X
publication_status: published
publisher: IEEE
status: public
title: 'Transformation of working environments through digitalization: Exploration
and systematization of complexity drivers'
type: conference
user_id: '83781'
year: '2018'
...
---
_id: '577'
abstract:
- lang: eng
text: A rising number of product variants together with decreasing lot sizes are
a result of the trend of individualization. Besides the upcoming organizational
issues, changes in the production technologies are required. Direct digital manufacturing
contributes to solve this problem by enabling the production of parts right from
the CAD data.Process capability analysis is applied in several industries to prove
the reliable compliance of products with quality requirements. As it is based
on statistical methods, new challenges arise in the context of single-part production.The
paper describes and compares different approaches for the adoption of process
capability analysis for single-part production with special focus on additive
manufacturing technologies. The statistical background and the applicability of
different capability parameters are discussed. An overview of existing research
work is given and supplemented by own approaches for the adoption of statistical
methods for single-part production. The aim of the research work is to establish
a first approach for the qualification of new technologies in single-part production.
author:
- first_name: Andrea
full_name: Huxol, Andrea
id: '43559'
last_name: Huxol
- first_name: Andrea
full_name: Davis, Andrea
id: '68611'
last_name: Davis
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
id: '14290'
last_name: Villmer
- first_name: Eva
full_name: Scheideler, Eva
id: '61522'
last_name: Scheideler
citation:
ama: 'Huxol A, Davis A, Villmer F-J, Scheideler E. Deployment of Process Capability
Analysis for Single-Part Production. In: Padoano E, Villmer F-J, Department of
Production Engineering and Management, eds. Production Engineering and Management.
Publication series in direct digital manufacturing . Lemgo; 2017:63-74.'
apa: Huxol, A., Davis, A., Villmer, F.-J., & Scheideler, E. (2017). Deployment
of Process Capability Analysis for Single-Part Production. In E. Padoano, F.-J.
Villmer, & Department of Production Engineering and Management (Eds.), Production
Engineering and Management (pp. 63–74). Lemgo.
bjps: Huxol A et al. (2017) Deployment of Process Capability Analysis
for Single-Part Production. In Padoano E, Villmer F-J and Department of Production
Engineering and Management (eds), Production Engineering and Management.
Lemgo, pp. 63–74.
chicago: Huxol, Andrea, Andrea Davis, Franz-Josef Villmer, and Eva Scheideler. “Deployment
of Process Capability Analysis for Single-Part Production.” In Production Engineering
and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department
of Production Engineering and Management, 63–74. Publication Series in Direct
Digital Manufacturing . Lemgo, 2017.
chicago-de: 'Huxol, Andrea, Andrea Davis, Franz-Josef Villmer und Eva Scheideler.
2017. Deployment of Process Capability Analysis for Single-Part Production. In:
Production Engineering and Management, hg. von Elio Padoano, Franz-Josef
Villmer, und Department of Production Engineering and Management, 63–74. Publication
series in direct digital manufacturing . Lemgo.'
din1505-2-1: 'Huxol, Andrea ; Davis, Andrea ; Villmer,
Franz-Josef ; Scheideler, Eva:
Deployment of Process Capability Analysis for Single-Part Production. In: Padoano, E. ; Villmer,
F.-J. ; Department of Production
Engineering and Management (Hrsg.): Production Engineering and Management,
Publication series in direct digital manufacturing . Lemgo, 2017, S. 63–74'
havard: 'A. Huxol, A. Davis, F.-J. Villmer, E. Scheideler, Deployment of Process
Capability Analysis for Single-Part Production, in: E. Padoano, F.-J. Villmer,
Department of Production Engineering and Management (Eds.), Production Engineering
and Management, Lemgo, 2017: pp. 63–74.'
ieee: A. Huxol, A. Davis, F.-J. Villmer, and E. Scheideler, “Deployment of Process
Capability Analysis for Single-Part Production,” in Production Engineering
and Management, Pordenone, Italy, 2017, no. 1, pp. 63–74.
mla: Huxol, Andrea, et al. “Deployment of Process Capability Analysis for Single-Part
Production.” Production Engineering and Management, edited by Elio Padoano
et al., no. 1, 2017, pp. 63–74.
short: 'A. Huxol, A. Davis, F.-J. Villmer, E. Scheideler, in: E. Padoano, F.-J.
Villmer, Department of Production Engineering and Management (Eds.), Production
Engineering and Management, Lemgo, 2017, pp. 63–74.'
ufg: 'Huxol, Andrea et. al. (2017): Deployment of Process Capability Analysis
for Single-Part Production, in: Elio Padoano et. al. (Hgg.): Production Engineering
and Management (=Publication series in direct digital manufacturing ),
Lemgo, S. 63–74.'
van: 'Huxol A, Davis A, Villmer F-J, Scheideler E. Deployment of Process Capability
Analysis for Single-Part Production. In: Padoano E, Villmer F-J, Department of
Production Engineering and Management, editors. Production Engineering and Management.
Lemgo; 2017. p. 63–74. (Publication series in direct digital manufacturing ).'
conference:
end_date: 2017-09-29
location: Pordenone, Italy
name: Proceedings7th International Conference
start_date: 2017-09-28
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-18T11:16:07Z
date_updated: 2023-03-15T13:50:01Z
department:
- _id: DEP1306
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
issue: '1'
keyword:
- Statistical process control
- Process capability analysis
- Single-part production
- Process optimization
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf
oa: '1'
page: 63-74
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-946856-01-6
publication_status: published
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf
series_title: 'Publication series in direct digital manufacturing '
status: public
title: Deployment of Process Capability Analysis for Single-Part Production
type: conference
user_id: '45673'
year: 2017
...
---
_id: '265'
abstract:
- lang: eng
text: The maintenance of a tool for injection molding or forming is usually accompanied
by its disassembly and assembly. The duration of the assembly activities is often
a large part of the total activity time for the maintenance of the tool. The degree
of performance of the employees in the execution of these disassembly and assembly
activities is often low. In addition, allowances occur (e.g. searching for work
equipment). At the Industrial Engineering Lab of the Ostwestfalen-Lippe University
of Applied Sciences, a prototype of an assistance system was developed to support
the assembly activities in toolmaking. With the help of this system, the operator
is guided step by step through the assembly process. The economic potential of
the system exists in the reduction of training times, the avoidance of assembly
errors and the increase of labor productivity.
author:
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Daniel
full_name: Riediger, Daniel
id: '52263'
last_name: Riediger
- first_name: Alexander
full_name: Unrau, Alexander
id: '64690'
last_name: Unrau
citation:
ama: 'Hinrichsen S, Riediger D, Unrau A. Development of a Projection-Based Assistance
System for Maintaining Injection Molding Tools. In: IEEE/ IEEM, ed. 2017 IEEE
International Conference on Industrial Engineering and Engineering Management
(IEEM). Danvers; 2017:1571-1575. doi:https://doi.org/10.1109/IEEM.2017.8290157'
apa: Hinrichsen, S., Riediger, D., & Unrau, A. (2017). Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools. In IEEE/ IEEM (Ed.),
2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM) (pp. 1571–1575). Danvers. https://doi.org/10.1109/IEEM.2017.8290157
bjps: Hinrichsen S, Riediger D and Unrau A (2017) Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools. In IEEE/ IEEM (ed.),
2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM). Danvers, pp. 1571–1575.
chicago: Hinrichsen, Sven, Daniel Riediger, and Alexander Unrau. “Development of
a Projection-Based Assistance System for Maintaining Injection Molding Tools.”
In 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM), edited by IEEE/ IEEM, 1571–75. Danvers, 2017. https://doi.org/10.1109/IEEM.2017.8290157.
chicago-de: 'Hinrichsen, Sven, Daniel Riediger und Alexander Unrau. 2017. Development
of a Projection-Based Assistance System for Maintaining Injection Molding Tools.
In: 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM), hg. von IEEE/ IEEM, 1571–1575. Danvers. doi:https://doi.org/10.1109/IEEM.2017.8290157,
.'
din1505-2-1: 'Hinrichsen, Sven ; Riediger, Daniel ; Unrau,
Alexander: Development of a Projection-Based Assistance System for Maintaining
Injection Molding Tools. In: IEEE/ IEEM
(Hrsg.): 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM). Danvers, 2017, S. 1571–1575'
havard: 'S. Hinrichsen, D. Riediger, A. Unrau, Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools, in: IEEE/ IEEM (Ed.),
2017 IEEE International Conference on Industrial Engineering and Engineering Management
(IEEM), Danvers, 2017: pp. 1571–1575.'
ieee: S. Hinrichsen, D. Riediger, and A. Unrau, “Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools,” in 2017 IEEE International
Conference on Industrial Engineering and Engineering Management (IEEM), Singapore,
2017, no. 1, pp. 1571–1575.
mla: Hinrichsen, Sven, et al. “Development of a Projection-Based Assistance System
for Maintaining Injection Molding Tools.” 2017 IEEE International Conference
on Industrial Engineering and Engineering Management (IEEM), edited by IEEE/
IEEM, no. 1, 2017, pp. 1571–75, doi:https://doi.org/10.1109/IEEM.2017.8290157.
short: 'S. Hinrichsen, D. Riediger, A. Unrau, in: IEEE/ IEEM (Ed.), 2017 IEEE International
Conference on Industrial Engineering and Engineering Management (IEEM), Danvers,
2017, pp. 1571–1575.'
ufg: 'Hinrichsen, Sven et. al. (2017): Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools, in: IEEE/ IEEM (Hg.):
2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM), Danvers, S. 1571–1575.'
van: 'Hinrichsen S, Riediger D, Unrau A. Development of a Projection-Based Assistance
System for Maintaining Injection Molding Tools. In: IEEE/ IEEM, editor. 2017 IEEE
International Conference on Industrial Engineering and Engineering Management
(IEEM). Danvers; 2017. p. 1571–5.'
conference:
end_date: 2017-12-13
location: Singapore
name: 'IEEE International Conference on Industrial Engineering and Engineering Management '
start_date: 2017-12-10
corporate_editor:
- IEEE/ IEEM
date_created: 2018-11-26T11:59:27Z
date_updated: 2023-03-15T13:49:41Z
ddc:
- '620'
department:
- _id: DEP7020
- _id: DEP1305
doi: https://doi.org/10.1109/IEEM.2017.8290157
issue: '1'
keyword:
- injection moulding
- machine tools
- maintenance engineering
- productivity
- projection-based assistance system
- injection molding tools
- assembly activities
- assembly process
- assembly errors
- tool maintenance
- disassembly activities
- economic potential
- Industrial Engineering Lab
- Ostwestfalen-Lippe University of Applied Sciences
- toolmaking
- Tools
- Injection molding
- Maintenance engineering
- Usability
- Task analysis
- Workstations
- Morphology
- assembly assistance systems
- assistance systems
- maintenance of injection molding tools
- manual assembly
language:
- iso: eng
page: 1571-1575
place: Danvers
publication: 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM)
publication_identifier:
isbn:
- '978-1-5386-0948-4 '
quality_controlled: '1'
status: public
title: Development of a Projection-Based Assistance System for Maintaining Injection
Molding Tools
type: conference
user_id: '74004'
year: 2017
...
---
_id: '2133'
abstract:
- lang: eng
text: Due to the material changes of components from metal to plastic or composite
materials, the structural health monitoring finds more and more interest in the
industrial fields. The reason is that these materials are more vulnerable to damage
or impacts which cannot be optically detected. In this contribution we present
a method to analyze the structure of plastic components with piezo-electrical
sensors and actuators. The components are stimulated by actuators, and sensors
capture the injected vibrations. These signals are decomposed into Intrinsic Mode
Functions to compute statistical features. A Fuzzy-Pattern-Classifier is applied
to detect structural modifications at the components under test.
author:
- first_name: Alexander
full_name: Dicks, Alexander
id: '1853'
last_name: Dicks
- first_name: Volker
full_name: Lohweg, Volker
id: '1804'
last_name: Lohweg
orcid: 0000-0002-3325-7887
- first_name: Henrik
full_name: Wittke, Henrik
last_name: Wittke
- first_name: Stefan
full_name: Linke, Stefan
last_name: Linke
citation:
ama: 'Dicks A, Lohweg V, Wittke H, Linke S. Structural Health Monitoring of Plastic
Components with Piezoelectric Sensors. In: 20th IEEE International Conference
on Emerging Technologies and Factory Automation. Luxembourg; 2015. doi: 10.1109/ETFA.2015.7301595'
apa: Dicks, A., Lohweg, V., Wittke, H., & Linke, S. (2015). Structural Health
Monitoring of Plastic Components with Piezoelectric Sensors. In 20th IEEE International
Conference on Emerging Technologies and Factory Automation. Luxembourg. https://doi.org/ 10.1109/ETFA.2015.7301595
bjps: Dicks A et al. (2015) Structural Health Monitoring of Plastic
Components with Piezoelectric Sensors. 20th IEEE International Conference on
Emerging Technologies and Factory Automation. Luxembourg.
chicago: Dicks, Alexander, Volker Lohweg, Henrik Wittke, and Stefan Linke. “Structural
Health Monitoring of Plastic Components with Piezoelectric Sensors.” In 20th
IEEE International Conference on Emerging Technologies and Factory Automation.
Luxembourg, 2015. https://doi.org/
10.1109/ETFA.2015.7301595.
chicago-de: 'Dicks, Alexander, Volker Lohweg, Henrik Wittke und Stefan Linke. 2015.
Structural Health Monitoring of Plastic Components with Piezoelectric Sensors.
In: 20th IEEE International Conference on Emerging Technologies and Factory
Automation. Luxembourg. doi:
10.1109/ETFA.2015.7301595, .'
din1505-2-1: 'Dicks, Alexander ; Lohweg, Volker ; Wittke,
Henrik ; Linke, Stefan: Structural
Health Monitoring of Plastic Components with Piezoelectric Sensors. In: 20th
IEEE International Conference on Emerging Technologies and Factory Automation.
Luxembourg, 2015'
havard: 'A. Dicks, V. Lohweg, H. Wittke, S. Linke, Structural Health Monitoring
of Plastic Components with Piezoelectric Sensors, in: 20th IEEE International
Conference on Emerging Technologies and Factory Automation, Luxembourg, 2015.'
ieee: A. Dicks, V. Lohweg, H. Wittke, and S. Linke, “Structural Health Monitoring
of Plastic Components with Piezoelectric Sensors,” in 20th IEEE International
Conference on Emerging Technologies and Factory Automation, 2015.
mla: Dicks, Alexander, et al. “Structural Health Monitoring of Plastic Components
with Piezoelectric Sensors.” 20th IEEE International Conference on Emerging
Technologies and Factory Automation, 2015, doi:
10.1109/ETFA.2015.7301595.
short: 'A. Dicks, V. Lohweg, H. Wittke, S. Linke, in: 20th IEEE International Conference
on Emerging Technologies and Factory Automation, Luxembourg, 2015.'
ufg: 'Dicks, Alexander et. al. (2015): Structural Health Monitoring of Plastic
Components with Piezoelectric Sensors, in: 20th IEEE International Conference
on Emerging Technologies and Factory Automation, Luxembourg.'
van: 'Dicks A, Lohweg V, Wittke H, Linke S. Structural Health Monitoring of Plastic
Components with Piezoelectric Sensors. In: 20th IEEE International Conference
on Emerging Technologies and Factory Automation. Luxembourg; 2015.'
date_created: 2019-12-04T09:11:17Z
date_updated: 2023-03-15T13:49:39Z
department:
- _id: DEP5023
doi: ' 10.1109/ETFA.2015.7301595'
keyword:
- Sensors
- Actuators
- Finite element analysis
- Plastics
- Modal analysis
- Monitoring
- Empirical mode decomposition
language:
- iso: eng
place: Luxembourg
publication: 20th IEEE International Conference on Emerging Technologies and Factory
Automation
status: public
title: Structural Health Monitoring of Plastic Components with Piezoelectric Sensors
type: conference
user_id: '68554'
year: 2015
...
---
_id: '2312'
author:
- first_name: Franz-Joseph
full_name: Barthold, Franz-Joseph
last_name: Barthold
- first_name: Daniel
full_name: Materna, Daniel
id: '61906'
last_name: Materna
citation:
ama: Barthold F-J, Materna D. A modified extended finite element method approach
for design sensitivity analysis. International Journal for Numerical Methods
in Engineering. 2015;104(3):209-234. doi:10.1002/nme.4930
apa: Barthold, F.-J., & Materna, D. (2015). A modified extended finite element
method approach for design sensitivity analysis. International Journal for
Numerical Methods in Engineering, 104(3), 209–234. https://doi.org/10.1002/nme.4930
bjps: Barthold F-J and Materna D (2015) A Modified Extended Finite Element
Method Approach for Design Sensitivity Analysis. International Journal for
Numerical Methods in Engineering 104, 209–234.
chicago: 'Barthold, Franz-Joseph, and Daniel Materna. “A Modified Extended Finite
Element Method Approach for Design Sensitivity Analysis.” International Journal
for Numerical Methods in Engineering 104, no. 3 (2015): 209–34. https://doi.org/10.1002/nme.4930.'
chicago-de: 'Barthold, Franz-Joseph und Daniel Materna. 2015. A modified extended
finite element method approach for design sensitivity analysis. International
Journal for Numerical Methods in Engineering 104, Nr. 3: 209–234. doi:10.1002/nme.4930,
.'
din1505-2-1: 'Barthold, Franz-Joseph
; Materna, Daniel: A modified extended
finite element method approach for design sensitivity analysis. In: International
Journal for Numerical Methods in Engineering Bd. 104, Wiley Online Library
(2015), Nr. 3, S. 209–234'
havard: F.-J. Barthold, D. Materna, A modified extended finite element method approach
for design sensitivity analysis, International Journal for Numerical Methods in
Engineering. 104 (2015) 209–234.
ieee: F.-J. Barthold and D. Materna, “A modified extended finite element method
approach for design sensitivity analysis,” International Journal for Numerical
Methods in Engineering, vol. 104, no. 3, pp. 209–234, 2015.
mla: Barthold, Franz-Joseph, and Daniel Materna. “A Modified Extended Finite Element
Method Approach for Design Sensitivity Analysis.” International Journal for
Numerical Methods in Engineering, vol. 104, no. 3, Wiley Online Library, 2015,
pp. 209–34, doi:10.1002/nme.4930.
short: F.-J. Barthold, D. Materna, International Journal for Numerical Methods in
Engineering 104 (2015) 209–234.
ufg: 'Barthold, Franz-Joseph/Materna, Daniel (2015): A modified extended
finite element method approach for design sensitivity analysis, in: International
Journal for Numerical Methods in Engineering 104 (3), S. 209–234.'
van: Barthold F-J, Materna D. A modified extended finite element method approach
for design sensitivity analysis. International Journal for Numerical Methods in
Engineering. 2015;104(3):209–34.
date_created: 2020-05-15T07:51:45Z
date_updated: 2023-03-15T13:49:39Z
department:
- _id: DEP3020
doi: 10.1002/nme.4930
intvolume: ' 104'
issue: '3'
keyword:
- extended finite element method
- structural optimisation
- sensitivity analysis
language:
- iso: eng
main_file_link:
- url: https://onlinelibrary.wiley.com/doi/full/10.1002/nme.4930
page: 209-234
publication: International Journal for Numerical Methods in Engineering
publication_identifier:
eissn:
- 1097-0207
publication_status: published
publisher: Wiley Online Library
status: public
title: A modified extended finite element method approach for design sensitivity analysis
type: journal_article
user_id: '74004'
volume: 104
year: 2015
...
---
_id: '2375'
abstract:
- lang: eng
text: Industrial wireless communication in license-free spectrum bands such as the
2.4-GHz-ISM band suffer from motion and multipath effects, which cause a high
time- and frequency-variant channel attenuation. Additionally, mutual interference
from heterogeneous wireless technologies limits real-time capabilities of industrial
wireless technologies. Therefore, performance validations of industrial wireless
technologies within appropriate industrial wireless environments are necessary.
In this paper, we present the first raw measurement data set publication of an
industrial wireless environment characterization in a data repository for free
public access to enable transparent industrial wireless technology validation
and to enhance their comparability. We characterize the whole license-free 2.4-GHz-ISM
band with a time resolution of 110 μs and a frequency resolution of 1MHz in a
coexistence scenario with four antennas obstructed by robot arm movements. Additionally,
the frequency and time variance of the measured channel attenuations are analyzed.
author:
- first_name: Dimitri
full_name: Block, Dimitri
last_name: Block
- first_name: Niels Hendrik
full_name: Fliedner, Niels Hendrik
last_name: Fliedner
- first_name: Daniel
full_name: Toews, Daniel
last_name: Toews
- first_name: Uwe
full_name: Meier, Uwe
last_name: Meier
citation:
ama: 'Block D, Fliedner NH, Toews D, Meier U. Wireless channel measurement data
sets for reproducible performance evaluation in industrial environments. In: 2015
IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA).
; 2015. doi:10.1109/etfa.2015.7301599'
apa: Block, D., Fliedner, N. H., Toews, D., & Meier, U. (2015). Wireless channel
measurement data sets for reproducible performance evaluation in industrial environments.
In 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation
(ETFA). Luxembourg, Luxembourg. https://doi.org/10.1109/etfa.2015.7301599
bjps: Block D et al. (2015) Wireless Channel Measurement Data Sets
for Reproducible Performance Evaluation in Industrial Environments. 2015 IEEE
20th Conference on Emerging Technologies & Factory Automation (ETFA).
chicago: Block, Dimitri, Niels Hendrik Fliedner, Daniel Toews, and Uwe Meier. “Wireless
Channel Measurement Data Sets for Reproducible Performance Evaluation in Industrial
Environments.” In 2015 IEEE 20th Conference on Emerging Technologies &
Factory Automation (ETFA), 2015. https://doi.org/10.1109/etfa.2015.7301599.
chicago-de: 'Block, Dimitri, Niels Hendrik Fliedner, Daniel Toews und Uwe Meier.
2015. Wireless channel measurement data sets for reproducible performance evaluation
in industrial environments. In: 2015 IEEE 20th Conference on Emerging Technologies
& Factory Automation (ETFA). doi:10.1109/etfa.2015.7301599,
.'
din1505-2-1: 'Block, Dimitri ; Fliedner, Niels Hendrik ; Toews,
Daniel ; Meier, Uwe: Wireless
channel measurement data sets for reproducible performance evaluation in industrial
environments. In: 2015 IEEE 20th Conference on Emerging Technologies &
Factory Automation (ETFA), 2015'
havard: 'D. Block, N.H. Fliedner, D. Toews, U. Meier, Wireless channel measurement
data sets for reproducible performance evaluation in industrial environments,
in: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation
(ETFA), 2015.'
ieee: D. Block, N. H. Fliedner, D. Toews, and U. Meier, “Wireless channel measurement
data sets for reproducible performance evaluation in industrial environments,”
in 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation
(ETFA), Luxembourg, Luxembourg, 2015.
mla: Block, Dimitri, et al. “Wireless Channel Measurement Data Sets for Reproducible
Performance Evaluation in Industrial Environments.” 2015 IEEE 20th Conference
on Emerging Technologies & Factory Automation (ETFA), 2015, doi:10.1109/etfa.2015.7301599.
short: 'D. Block, N.H. Fliedner, D. Toews, U. Meier, in: 2015 IEEE 20th Conference
on Emerging Technologies & Factory Automation (ETFA), 2015.'
ufg: 'Block, Dimitri et. al. (2015): Wireless channel measurement data sets
for reproducible performance evaluation in industrial environments, in: 2015
IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA).'
van: 'Block D, Fliedner NH, Toews D, Meier U. Wireless channel measurement data
sets for reproducible performance evaluation in industrial environments. In: 2015
IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA).
2015.'
conference:
end_date: 2015-09-11
location: ' Luxembourg, Luxembourg'
name: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA)
start_date: 2015-09-08
date_created: 2020-05-18T15:20:18Z
date_updated: 2023-03-15T13:49:39Z
department:
- _id: DEP5000
doi: 10.1109/etfa.2015.7301599
keyword:
- Wireless communication
- Wireless sensor networks
- Antenna measurements
- Attenuation measurement
- Extraterrestrial measurements
- Time-frequency analysis
language:
- iso: eng
main_file_link:
- url: https://ieeexplore.ieee.org/document/7301599
publication: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation
(ETFA)
publication_identifier:
isbn:
- '9781467379298'
publication_status: published
quality_controlled: '1'
status: public
title: Wireless channel measurement data sets for reproducible performance evaluation
in industrial environments
type: conference
user_id: '57956'
year: 2015
...
---
_id: '597'
abstract:
- lang: eng
text: "This paper is aimed to discuss current research using data mining techniques
and industry statistics in production environments. The general research approach
is based on the idea of using data mining processes and techniques of industry
statistics to find rare and hidden patterns behind failures of complex components.
A case study will be applied to illustrate how the technique is carried out and
where the limits of this approach occur. The case study deals with a component
supplier of printing machines, which received an increasing number of client complaints,
all related to one distinct problem. The observed failures seem to occur only
among clients with very high quality standards. The affected component undergoes
a very complex production process with several steps in different departments.
Every single production unit records data information from multiple process variables
and at different points in time. In the beginning there was no understanding of
the failure causes in production at all. Therefore a huge amount of production
data had to be analyzed to find the pattern that discloses the failure.\r\nThe
data mining process starts with a first step in which the given data sets are
prepared and then cleaned. Followed up by building a prediction model. The aim
is to detect the root causes for failures and to predict potential failures in
affected components. This paper shows how to use data mining to get the answer
on pressing production failures.\r\n"
author:
- first_name: Eva
full_name: Scheideler, Eva
id: '61522'
last_name: Scheideler
- first_name: Andrea
full_name: Ahlemeyer-Stubbe, Andrea
last_name: Ahlemeyer-Stubbe
citation:
ama: 'Scheideler E, Ahlemeyer-Stubbe A. Data Mining: A Potential Detector to Find
Failure in Complex Components. In: Padoano E, Villmer FJ, Department of Production
Engineering and Management, Hochschule Ostwestfalen-Lippe, eds. Production
Engineering and Management : Proceedings, 5th International Conference, October
1 and 2, 2015, Trieste, Italy. Hochschule Ostwestfalen-Lippe; 2015:163-174.'
apa: 'Scheideler, E., & Ahlemeyer-Stubbe, A. (2015). Data Mining: A Potential
Detector to Find Failure in Complex Components. In E. Padoano, F.-J. Villmer,
Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe
(Eds.), Production engineering and management : proceedings, 5th international
conference, October 1 and 2, 2015, Trieste, Italy (Issue 1, pp. 163–174).
Hochschule Ostwestfalen-Lippe.'
bjps: 'Scheideler E and Ahlemeyer-Stubbe A (2015) Data Mining: A Potential
Detector to Find Failure in Complex Components. In Padoano E et al. (eds), Production
Engineering and Management : Proceedings, 5th International Conference, October
1 and 2, 2015, Trieste, Italy. Lemgo: Hochschule Ostwestfalen-Lippe, pp. 163–174.'
chicago: 'Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Data Mining: A Potential
Detector to Find Failure in Complex Components.” In Production Engineering
and Management : Proceedings, 5th International Conference, October 1 and 2, 2015,
Trieste, Italy, edited by Elio Padoano, Franz-Josef Villmer, Department of
Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, 163–74.
Lemgo: Hochschule Ostwestfalen-Lippe, 2015.'
chicago-de: 'Scheideler, Eva und Andrea Ahlemeyer-Stubbe. 2015. Data Mining: A Potential
Detector to Find Failure in Complex Components. In: Production engineering
and management : proceedings, 5th international conference, October 1 and 2, 2015,
Trieste, Italy, hg. von Elio Padoano, Franz-Josef Villmer, Department of Production
Engineering and Management, und Hochschule Ostwestfalen-Lippe, 163–174. Lemgo:
Hochschule Ostwestfalen-Lippe.'
din1505-2-1: 'Scheideler, Eva ; Ahlemeyer-Stubbe, Andrea: Data Mining:
A Potential Detector to Find Failure in Complex Components. In: Padoano,
E. ; Villmer, F.-J. ; Department of Production Engineering and Management
; Hochschule Ostwestfalen-Lippe
(Hrsg.): Production engineering and management : proceedings, 5th international
conference, October 1 and 2, 2015, Trieste, Italy. Lemgo : Hochschule Ostwestfalen-Lippe,
2015, S. 163–174'
havard: 'E. Scheideler, A. Ahlemeyer-Stubbe, Data Mining: A Potential Detector to
Find Failure in Complex Components, in: E. Padoano, F.-J. Villmer, Department
of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.),
Production Engineering and Management : Proceedings, 5th International Conference,
October 1 and 2, 2015, Trieste, Italy, Hochschule Ostwestfalen-Lippe, Lemgo, 2015:
pp. 163–174.'
ieee: 'E. Scheideler and A. Ahlemeyer-Stubbe, “Data Mining: A Potential Detector
to Find Failure in Complex Components,” in Production engineering and management :
proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy,
Trieste, Italy, 2015, no. 1, pp. 163–174.'
mla: 'Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Data Mining: A Potential Detector
to Find Failure in Complex Components.” Production Engineering and Management :
Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy,
edited by Elio Padoano et al., no. 1, Hochschule Ostwestfalen-Lippe, 2015, pp.
163–74.'
short: 'E. Scheideler, A. Ahlemeyer-Stubbe, in: E. Padoano, F.-J. Villmer, Department
of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.),
Production Engineering and Management : Proceedings, 5th International Conference,
October 1 and 2, 2015, Trieste, Italy, Hochschule Ostwestfalen-Lippe, Lemgo, 2015,
pp. 163–174.'
ufg: 'Scheideler, Eva/Ahlemeyer-Stubbe, Andrea: Data Mining: A Potential
Detector to Find Failure in Complex Components, in: Padoano, Elio u. a. (Hgg.):
Production engineering and management : proceedings, 5th international conference,
October 1 and 2, 2015, Trieste, Italy, Lemgo 2015, S. 163–174.'
van: 'Scheideler E, Ahlemeyer-Stubbe A. Data Mining: A Potential Detector to Find
Failure in Complex Components. In: Padoano E, Villmer FJ, Department of Production
Engineering and Management, Hochschule Ostwestfalen-Lippe, editors. Production
engineering and management : proceedings, 5th international conference, October
1 and 2, 2015, Trieste, Italy. Lemgo: Hochschule Ostwestfalen-Lippe; 2015. p.
163–74.'
conference:
end_date: 2015-10-02
location: Trieste, Italy
name: '5th International Conference "Production Engineering and Management" '
start_date: 2015-10-01
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-19T07:15:57Z
date_updated: 2024-03-22T13:12:47Z
department:
- _id: DEP7000
- _id: DEP1306
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
id: '14290'
last_name: Villmer
issue: '1'
keyword:
- Data mining
- production failure
- multi-variant analysis
- multivariate process control
- predictive modelling
- case study
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf
oa: '1'
page: 163-174
place: Lemgo
publication: 'Production engineering and management : proceedings, 5th international
conference, October 1 and 2, 2015, Trieste, Italy'
publication_identifier:
isbn:
- 978-3-941645-11-0
publication_status: published
publisher: Hochschule Ostwestfalen-Lippe
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf
status: public
title: 'Data Mining: A Potential Detector to Find Failure in Complex Components'
type: conference
user_id: '83781'
year: '2015'
...
---
_id: '4373'
abstract:
- lang: eng
text: Today, usability measures for the evaluation of systems and interfaces are
mostly assessed in an isolated way. This paper addresses the question whether
an integrative multi-dimensional feature evaluation can lead to different and
more holistic results. We combined traditional measures (e.g., time to task completion)
with advanced measures, like eye tracking, biosignal data logging and assessment
of user emotions. For the evaluation of emotions, we used verbal methods (PAD
Semantic Scale and a questionnaire) and a nonverbal method with EmoCards. The
overall goal was to document and analyze the interaction as completely as possible
(including effectiveness, efficiency and user satisfaction), focusing especially
on objective measurements. Furthermore, the recording and assessment of emotions,
which are part of the user experience, should give insights into user satisfaction.
author:
- first_name: Verena
full_name: Ermes, Verena
last_name: Ermes
- first_name: Armin
full_name: Janß, Armin
last_name: Janß
- first_name: Klaus
full_name: Radermacher, Klaus
last_name: Radermacher
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Ermes V, Janß A, Radermacher K, Röcker C. Analyzing the Benefits of Integrative
Multi-Dimensional Assessments of Usability Features in Interaction-Centered User
Studies. In: Hein A, Association for Computing Machinery-Digital Library, eds.
Proceedings of the 8th International Conference on Pervasive Computing Technologies
for Healthcare . Brussels, Belgium : ICST (Institute for Computer Sciences,
Social-Informatics and Telecommunications Engineering); 2014:227-230. doi:10.4108/icst.pervasivehealth.2014.255142#d73284787e1'
apa: 'Ermes, V., Janß, A., Radermacher, K., & Röcker, C. (2014). Analyzing the
Benefits of Integrative Multi-Dimensional Assessments of Usability Features in
Interaction-Centered User Studies. In A. Hein & Association for Computing
Machinery-Digital Library (Eds.), Proceedings of the 8th International Conference
on Pervasive Computing Technologies for Healthcare (pp. 227–230). Brussels,
Belgium : ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications
Engineering). https://doi.org/10.4108/icst.pervasivehealth.2014.255142#d73284787e1'
bjps: 'Ermes V et al. (2014) Analyzing the Benefits of Integrative
Multi-Dimensional Assessments of Usability Features in Interaction-Centered User
Studies. In Hein A and Association for Computing Machinery-Digital Library (eds),
Proceedings of the 8th International Conference on Pervasive Computing Technologies
for Healthcare . Brussels, Belgium : ICST (Institute for Computer Sciences,
Social-Informatics and Telecommunications Engineering), pp. 227–230.'
chicago: 'Ermes, Verena, Armin Janß, Klaus Radermacher, and Carsten Röcker. “Analyzing
the Benefits of Integrative Multi-Dimensional Assessments of Usability Features
in Interaction-Centered User Studies.” In Proceedings of the 8th International
Conference on Pervasive Computing Technologies for Healthcare , edited by
Andreas Hein and Association for Computing Machinery-Digital Library, 227–30.
Brussels, Belgium : ICST (Institute for Computer Sciences, Social-Informatics
and Telecommunications Engineering), 2014. https://doi.org/10.4108/icst.pervasivehealth.2014.255142#d73284787e1.'
chicago-de: 'Ermes, Verena, Armin Janß, Klaus Radermacher und Carsten Röcker. 2014.
Analyzing the Benefits of Integrative Multi-Dimensional Assessments of Usability
Features in Interaction-Centered User Studies. In: Proceedings of the 8th International
Conference on Pervasive Computing Technologies for Healthcare , hg. von Andreas
Hein und Association for Computing Machinery-Digital Library, 227–230. Brussels,
Belgium : ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications
Engineering). doi:10.4108/icst.pervasivehealth.2014.255142#d73284787e1,
.'
din1505-2-1: 'Ermes, Verena ; Janß, Armin ; Radermacher,
Klaus ; Röcker, Carsten:
Analyzing the Benefits of Integrative Multi-Dimensional Assessments of Usability
Features in Interaction-Centered User Studies. In: Hein,
A. ; Association for Computing Machinery-Digital
Library (Hrsg.): Proceedings of the 8th International Conference on
Pervasive Computing Technologies for Healthcare . Brussels, Belgium : ICST
(Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering),
2014, S. 227–230'
havard: 'V. Ermes, A. Janß, K. Radermacher, C. Röcker, Analyzing the Benefits of
Integrative Multi-Dimensional Assessments of Usability Features in Interaction-Centered
User Studies, in: A. Hein, Association for Computing Machinery-Digital Library
(Eds.), Proceedings of the 8th International Conference on Pervasive Computing
Technologies for Healthcare , ICST (Institute for Computer Sciences, Social-Informatics
and Telecommunications Engineering), Brussels, Belgium , 2014: pp. 227–230.'
ieee: V. Ermes, A. Janß, K. Radermacher, and C. Röcker, “Analyzing the Benefits
of Integrative Multi-Dimensional Assessments of Usability Features in Interaction-Centered
User Studies,” in Proceedings of the 8th International Conference on Pervasive
Computing Technologies for Healthcare , Oldenburg, 2014, pp. 227–230.
mla: Ermes, Verena, et al. “Analyzing the Benefits of Integrative Multi-Dimensional
Assessments of Usability Features in Interaction-Centered User Studies.” Proceedings
of the 8th International Conference on Pervasive Computing Technologies for Healthcare
, edited by Andreas Hein and Association for Computing Machinery-Digital Library, ICST
(Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering),
2014, pp. 227–30, doi:10.4108/icst.pervasivehealth.2014.255142#d73284787e1.
short: 'V. Ermes, A. Janß, K. Radermacher, C. Röcker, in: A. Hein, Association for
Computing Machinery-Digital Library (Eds.), Proceedings of the 8th International
Conference on Pervasive Computing Technologies for Healthcare , ICST (Institute
for Computer Sciences, Social-Informatics and Telecommunications Engineering),
Brussels, Belgium , 2014, pp. 227–230.'
ufg: 'Ermes, Verena et. al. (2014): Analyzing the Benefits of Integrative
Multi-Dimensional Assessments of Usability Features in Interaction-Centered User
Studies, in: Andreas Hein/Association for Computing Machinery-Digital Library
(Hgg.): Proceedings of the 8th International Conference on Pervasive Computing
Technologies for Healthcare , Brussels, Belgium , S. 227–230.'
van: 'Ermes V, Janß A, Radermacher K, Röcker C. Analyzing the Benefits of Integrative
Multi-Dimensional Assessments of Usability Features in Interaction-Centered User
Studies. In: Hein A, Association for Computing Machinery-Digital Library, editors.
Proceedings of the 8th International Conference on Pervasive Computing Technologies
for Healthcare . Brussels, Belgium : ICST (Institute for Computer Sciences, Social-Informatics
and Telecommunications Engineering); 2014. p. 227–30.'
conference:
end_date: 2014-05-23
location: Oldenburg
name: 8th International Conference on Pervasive Computing Technologies for Healthcare
start_date: 2014-05-20
corporate_editor:
- Association for Computing Machinery-Digital Library
- ACM Special Interest Group on Computer-Human Interaction
date_created: 2021-01-14T10:13:21Z
date_updated: 2023-03-15T13:49:52Z
department:
- _id: DEP5023
doi: 10.4108/icst.pervasivehealth.2014.255142#d73284787e1
editor:
- first_name: Andreas
full_name: Hein, Andreas
last_name: Hein
extern: '1'
keyword:
- Usability Measures
- User Experience
- Eye Tracking
- Biosignal Data Logging
- Emotion Evaluation
- Risk Analysis
- Medical Devices
- Integrated Usability Evaluation
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 227 - 230
place: 'Brussels, Belgium '
publication: 'Proceedings of the 8th International Conference on Pervasive Computing
Technologies for Healthcare '
publication_identifier:
unknown:
- 978-1-63190-011-2
publication_status: published
publisher: ' ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications
Engineering)'
related_material:
link:
- relation: original
url: https://doi.org/10.4108/icst.pervasivehealth.2014.255142
status: public
title: Analyzing the Benefits of Integrative Multi-Dimensional Assessments of Usability
Features in Interaction-Centered User Studies
type: conference
user_id: '15514'
year: 2014
...
---
_id: '10068'
abstract:
- lang: eng
text: Currently, cities are confronting a multitude of challenges including climate
change, demographic change, urbanization and land subsidence. Resulting flooding,
droughts and other disturbances could lead to water shortages, severe interruptions,
hydraulic problems or underutilization of water infrastructure systems. One way
that cities can become more resilient is by diversifying their water resources
and reducing their dependency on central water infrastructures. Water infrastructure
systems consisting of decentral or semi-central partial systems would be more
resilient because a failure in these systems would only affect a small part of
the urban area. Instead of an incremental improvement of the water infrastructure,
there is a need for system innovations that will allow an adaptive development
to changing conditions and which will ensure that future sustainability challenges
are met. However, moving towards more resilient water technologies is seen as
controversial for built-up areas. To answer the question if a transformation to
a more resilient water infrastructure in built-up areas is feasible (technically
and economically), a balancing and assessment of the corresponding effects have
been done by way of comparing a “transformation” scenario with a reference scenario
“business as usual”. If one takes a long-term period of observation (70 years),
the costs balance of the scenarios “reference” and “transformation” both turn
out to be on a comparative level. By contrast, the consumption of environmental
resources in the scenario “transformation” is almost twice as low as in the “reference”.
author:
- first_name: Engelbert
full_name: Schramm, Engelbert
last_name: Schramm
- first_name: Jörg
full_name: Felmeden, Jörg
id: '81335'
last_name: Felmeden
citation:
ama: 'Schramm E, Felmeden J. Towards More Resilient Water Infrastructures. In: Zimmermann
KO, ed. Resilient Cities 2 : Cities and Adaptation to Climate Change – Proceedings
of the Global Forum 2011 . Vol 2. Local sustainability. Springer Dordrecht;
2012:177-186. doi:https://doi.org/10.1007/978-94-007-4223-9_19'
apa: 'Schramm, E., & Felmeden, J. (2012). Towards More Resilient Water Infrastructures.
In K. O. Zimmermann (Ed.), Resilient Cities 2 : Cities and Adaptation to Climate
Change – Proceedings of the Global Forum 2011 (Vol. 2, pp. 177–186). Springer
Dordrecht. https://doi.org/10.1007/978-94-007-4223-9_19'
bjps: 'Schramm E and Felmeden J (2012) Towards More Resilient Water Infrastructures.
In Zimmermann KO (ed.), Resilient Cities 2 : Cities and Adaptation to Climate
Change – Proceedings of the Global Forum 2011 , vol. 2. Dordrecht: Springer
Dordrecht, pp. 177–186.'
chicago: 'Schramm, Engelbert, and Jörg Felmeden. “Towards More Resilient Water Infrastructures.”
In Resilient Cities 2 : Cities and Adaptation to Climate Change – Proceedings
of the Global Forum 2011 , edited by Karl Otto Zimmermann, 2:177–86. Local
Sustainability. Dordrecht: Springer Dordrecht, 2012. https://doi.org/10.1007/978-94-007-4223-9_19.'
chicago-de: 'Schramm, Engelbert und Jörg Felmeden. 2012. Towards More Resilient
Water Infrastructures. In: Resilient Cities 2 : Cities and Adaptation to Climate
Change – Proceedings of the Global Forum 2011 , hg. von Karl Otto Zimmermann,
2:177–186. Local sustainability. Dordrecht: Springer Dordrecht. doi:https://doi.org/10.1007/978-94-007-4223-9_19,
.'
din1505-2-1: 'Schramm, Engelbert ;
Felmeden, Jörg: Towards More Resilient
Water Infrastructures. In: Zimmermann,
K. O. (Hrsg.): Resilient Cities 2 : Cities and Adaptation to Climate
Change – Proceedings of the Global Forum 2011 , Local sustainability.
Bd. 2. Dordrecht : Springer Dordrecht, 2012, S. 177–186'
havard: 'E. Schramm, J. Felmeden, Towards More Resilient Water Infrastructures,
in: K.O. Zimmermann (Ed.), Resilient Cities 2 : Cities and Adaptation to Climate
Change – Proceedings of the Global Forum 2011 , Springer Dordrecht, Dordrecht,
2012: pp. 177–186.'
ieee: 'E. Schramm and J. Felmeden, “Towards More Resilient Water Infrastructures,”
in Resilient Cities 2 : Cities and Adaptation to Climate Change – Proceedings
of the Global Forum 2011 , vol. 2, K. O. Zimmermann, Ed. Dordrecht: Springer
Dordrecht, 2012, pp. 177–186. doi: https://doi.org/10.1007/978-94-007-4223-9_19.'
mla: 'Schramm, Engelbert, and Jörg Felmeden. “Towards More Resilient Water Infrastructures.”
Resilient Cities 2 : Cities and Adaptation to Climate Change – Proceedings
of the Global Forum 2011 , edited by Karl Otto Zimmermann, vol. 2, Springer
Dordrecht, 2012, pp. 177–86, https://doi.org/10.1007/978-94-007-4223-9_19.'
short: 'E. Schramm, J. Felmeden, in: K.O. Zimmermann (Ed.), Resilient Cities 2 :
Cities and Adaptation to Climate Change – Proceedings of the Global Forum 2011
, Springer Dordrecht, Dordrecht, 2012, pp. 177–186.'
ufg: 'Schramm, Engelbert/Felmeden, Jörg: Towards More Resilient Water Infrastructures,
in: Zimmermann, Karl Otto (Hg.): Resilient Cities 2 : Cities and Adaptation
to Climate Change – Proceedings of the Global Forum 2011 , Bd. 2, Dordrecht 2012
(Local sustainability), S. 177–186.'
van: 'Schramm E, Felmeden J. Towards More Resilient Water Infrastructures. In: Zimmermann
KO, editor. Resilient Cities 2 : Cities and Adaptation to Climate Change – Proceedings
of the Global Forum 2011 . Dordrecht: Springer Dordrecht; 2012. p. 177–86. (Local
sustainability; vol. 2).'
conference:
end_date: 2011-06-05
location: Bonn
name: 'Proceedings of the Global Forum 2011 '
start_date: 2011-06-03
date_created: 2023-06-30T06:30:30Z
date_updated: 2023-07-05T14:53:26Z
department:
- _id: DEP3021
doi: https://doi.org/10.1007/978-94-007-4223-9_19
editor:
- first_name: Karl Otto
full_name: Zimmermann, Karl Otto
last_name: Zimmermann
extern: '1'
intvolume: ' 2'
keyword:
- Climate change
- Eco-efficiency analysis
- System innovations
- Vulnerability
- Water infrastructure
language:
- iso: eng
page: 177–186
place: Dordrecht
publication: 'Resilient Cities 2 : Cities and Adaptation to Climate Change – Proceedings
of the Global Forum 2011 '
publication_identifier:
eisbn:
- '978-94-007-4223-9 '
eissn:
- '2211-2790 '
isbn:
- 978-94-007-9776-5
- 978-94-007-4222-2
issn:
- '2211-2782 '
publication_status: published
publisher: Springer Dordrecht
related_material:
link:
- relation: confirmation
url: https://www.springer.com/us/book/9789400742222
series_title: Local sustainability
status: public
title: Towards More Resilient Water Infrastructures
type: book_chapter
user_id: '83781'
volume: 2
year: '2012'
...
---
_id: '2068'
abstract:
- lang: eng
text: The production of printing goods is laborious. Furthermore, the print quality,
especially in banknotes, must be assured. It is accepted, that print defects are
generated because printing parameters, also machine parameters can change unnoticed.
Therefore, a combined concept for a multi-sensory learning and classification
model based on new adaptive fuzzy-pattern-classifiers for data inspection is proposed.
This inspection concept, which combines optical, acoustical and other machine
information, comes up with a large amount of data, which leads to multivariate
methods for data analysis. Multivariate methods are useful for analysis of large
and complex data sets that consist of many variables measured on large numbers
of physical data.
author:
- first_name: Walter
full_name: Dyck, Walter
last_name: Dyck
- first_name: Thomas
full_name: Türke, Thomas
last_name: Türke
- first_name: Johannes
full_name: Schaede, Johannes
id: '2128'
last_name: Schaede
- first_name: Volker
full_name: Lohweg, Volker
id: '1804'
last_name: Lohweg
orcid: 0000-0002-3325-7887
citation:
ama: 'Dyck W, Türke T, Schaede J, Lohweg V. A Fuzzy-Pattern-Classifier-Based Adaptive
Learning Model for Sensor Fusion. In: Thessaloniki, Greece: MLSP 2007 - International
Workshop on MACHINE LEARNING FOR SIGNAL PROCESSING; 2007:accepted for publication.
doi:10.1109/MLSP.2007.4414320'
apa: 'Dyck, W., Türke, T., Schaede, J., & Lohweg, V. (2007). A Fuzzy-Pattern-Classifier-Based
Adaptive Learning Model for Sensor Fusion (p. accepted for publication). Thessaloniki,
Greece: MLSP 2007 - International Workshop on MACHINE LEARNING FOR SIGNAL PROCESSING.
https://doi.org/10.1109/MLSP.2007.4414320'
bjps: 'Dyck W et al. (2007) A Fuzzy-Pattern-Classifier-Based Adaptive
Learning Model for Sensor Fusion. Thessaloniki, Greece: MLSP 2007 - International
Workshop on MACHINE LEARNING FOR SIGNAL PROCESSING, p. accepted for publication.'
chicago: 'Dyck, Walter, Thomas Türke, Johannes Schaede, and Volker Lohweg. “A Fuzzy-Pattern-Classifier-Based
Adaptive Learning Model for Sensor Fusion,” accepted for publication. Thessaloniki,
Greece: MLSP 2007 - International Workshop on MACHINE LEARNING FOR SIGNAL PROCESSING,
2007. https://doi.org/10.1109/MLSP.2007.4414320.'
chicago-de: 'Dyck, Walter, Thomas Türke, Johannes Schaede und Volker Lohweg. 2007.
A Fuzzy-Pattern-Classifier-Based Adaptive Learning Model for Sensor Fusion. In:
, accepted for publication. Thessaloniki, Greece: MLSP 2007 - International Workshop
on MACHINE LEARNING FOR SIGNAL PROCESSING. doi:10.1109/MLSP.2007.4414320,
.'
din1505-2-1: 'Dyck, Walter ; Türke, Thomas ; Schaede,
Johannes ; Lohweg, Volker:
A Fuzzy-Pattern-Classifier-Based Adaptive Learning Model for Sensor Fusion. In:
. Thessaloniki, Greece : MLSP 2007 - International Workshop on MACHINE LEARNING
FOR SIGNAL PROCESSING, 2007, S. accepted for publication'
havard: 'W. Dyck, T. Türke, J. Schaede, V. Lohweg, A Fuzzy-Pattern-Classifier-Based
Adaptive Learning Model for Sensor Fusion, in: MLSP 2007 - International Workshop
on MACHINE LEARNING FOR SIGNAL PROCESSING, Thessaloniki, Greece, 2007: p. accepted
for publication.'
ieee: W. Dyck, T. Türke, J. Schaede, and V. Lohweg, “A Fuzzy-Pattern-Classifier-Based
Adaptive Learning Model for Sensor Fusion,” 2007, p. accepted for publication.
mla: Dyck, Walter, et al. A Fuzzy-Pattern-Classifier-Based Adaptive Learning
Model for Sensor Fusion. MLSP 2007 - International Workshop on MACHINE LEARNING
FOR SIGNAL PROCESSING, 2007, p. accepted for publication, doi:10.1109/MLSP.2007.4414320.
short: 'W. Dyck, T. Türke, J. Schaede, V. Lohweg, in: MLSP 2007 - International
Workshop on MACHINE LEARNING FOR SIGNAL PROCESSING, Thessaloniki, Greece, 2007,
p. accepted for publication.'
ufg: 'Dyck, Walter et. al. (2007): A Fuzzy-Pattern-Classifier-Based Adaptive
Learning Model for Sensor Fusion, in: , Thessaloniki, Greece, S. accepted for
publication.'
van: 'Dyck W, Türke T, Schaede J, Lohweg V. A Fuzzy-Pattern-Classifier-Based Adaptive
Learning Model for Sensor Fusion. In Thessaloniki, Greece: MLSP 2007 - International
Workshop on MACHINE LEARNING FOR SIGNAL PROCESSING; 2007. p. accepted for publication.'
date_created: 2019-11-29T13:50:28Z
date_updated: 2023-03-15T13:49:38Z
department:
- _id: DEP5023
doi: 10.1109/MLSP.2007.4414320
keyword:
- Sensor fusion
- Inspection
- Optical sensors
- Printing machinery
- Data security
- Data analysis
- Production
- Degradation
- Principal component analysis
- Karhunen-Loeve transforms
language:
- iso: eng
main_file_link:
- url: https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=4414320&tag=1
page: accepted for publication
place: Thessaloniki, Greece
publication_identifier:
eisbn:
- 978-1-4244-1566-3
isbn:
- 978-1-4244-1565-6
issn:
- '1551-2541 '
unknown:
- '2378-928X '
publication_status: published
publisher: MLSP 2007 - International Workshop on MACHINE LEARNING FOR SIGNAL PROCESSING
status: public
title: A Fuzzy-Pattern-Classifier-Based Adaptive Learning Model for Sensor Fusion
type: conference
user_id: '45673'
year: 2007
...
---
_id: '2058'
abstract:
- lang: eng
text: Nonlinear spatial transforms and fuzzy pattern classification with unimodal
potential functions are established in signal processing. They have proved to
be excellent tools in feature extraction and classification. In this paper we
present a hardware accelerated image processing and classification scheme for
rotation and translation tolerant two-dimensional pattern recognition, which is
based on one-dimensional nonlinear discrete circular transforms. However, the
scheme is simple; it is stable and therefore well suited for industrial applications.
An implementation on one field programmable gate array (FPGA) is proposed.
author:
- first_name: Tobias
full_name: Henke, Tobias
last_name: Henke
- first_name: Volker
full_name: Lohweg, Volker
id: '1804'
last_name: Lohweg
orcid: 0000-0002-3325-7887
citation:
ama: 'Henke T, Lohweg V. A Simplified Scheme For Hardware-Based Pattern Recognition.
In: IEEE International Conference On Image Processing (ICIP), Proceedings.
Genova: IEEE; 2005:349-352. doi:
10.1109/ICIP.2005.1529759'
apa: 'Henke, T., & Lohweg, V. (2005). A Simplified Scheme For Hardware-Based
Pattern Recognition. In IEEE International Conference On Image Processing (ICIP),
Proceedings (pp. 349–352). Genova: IEEE. https://doi.org/
10.1109/ICIP.2005.1529759'
bjps: 'Henke T and Lohweg V (2005) A Simplified Scheme For Hardware-Based
Pattern Recognition. IEEE International Conference On Image Processing (ICIP),
Proceedings. Genova: IEEE, pp. 349–352.'
chicago: 'Henke, Tobias, and Volker Lohweg. “A Simplified Scheme For Hardware-Based
Pattern Recognition.” In IEEE International Conference On Image Processing
(ICIP), Proceedings, 349–52. Genova: IEEE, 2005. https://doi.org/ 10.1109/ICIP.2005.1529759.'
chicago-de: 'Henke, Tobias und Volker Lohweg. 2005. A Simplified Scheme For Hardware-Based
Pattern Recognition. In: IEEE International Conference On Image Processing
(ICIP), Proceedings, 349–352. Genova: IEEE. doi: 10.1109/ICIP.2005.1529759, .'
din1505-2-1: 'Henke, Tobias ; Lohweg, Volker: A Simplified Scheme For
Hardware-Based Pattern Recognition. In: IEEE International Conference On Image
Processing (ICIP), Proceedings. Genova : IEEE, 2005, S. 349–352'
havard: 'T. Henke, V. Lohweg, A Simplified Scheme For Hardware-Based Pattern Recognition,
in: IEEE International Conference On Image Processing (ICIP), Proceedings, IEEE,
Genova, 2005: pp. 349–352.'
ieee: T. Henke and V. Lohweg, “A Simplified Scheme For Hardware-Based Pattern Recognition,”
in IEEE International Conference On Image Processing (ICIP), Proceedings,
2005, pp. 349–352.
mla: Henke, Tobias, and Volker Lohweg. “A Simplified Scheme For Hardware-Based Pattern
Recognition.” IEEE International Conference On Image Processing (ICIP), Proceedings,
IEEE, 2005, pp. 349–52, doi:
10.1109/ICIP.2005.1529759.
short: 'T. Henke, V. Lohweg, in: IEEE International Conference On Image Processing
(ICIP), Proceedings, IEEE, Genova, 2005, pp. 349–352.'
ufg: 'Henke, Tobias/Lohweg, Volker (2005): A Simplified Scheme For Hardware-Based
Pattern Recognition, in: IEEE International Conference On Image Processing
(ICIP), Proceedings, Genova, S. 349–352.'
van: 'Henke T, Lohweg V. A Simplified Scheme For Hardware-Based Pattern Recognition.
In: IEEE International Conference On Image Processing (ICIP), Proceedings. Genova:
IEEE; 2005. p. 349–52.'
date_created: 2019-11-29T13:17:49Z
date_updated: 2023-03-15T13:49:38Z
department:
- _id: DEP5023
doi: ' 10.1109/ICIP.2005.1529759'
keyword:
- Pattern recognition
- Field programmable gate arrays
- Neural networks
- Image processing
- Discrete transforms
- Signal processing
- Image retrieval
- Image recognition
- Transient analysis
- Fuzzy systems
language:
- iso: eng
main_file_link:
- url: https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=1529759
page: 349 - 352
place: Genova
publication: IEEE International Conference On Image Processing (ICIP), Proceedings
publication_identifier:
eissn:
- '2381-8549 '
isbn:
- 0-7803-9134-9
issn:
- '1522-4880 '
publication_status: published
publisher: IEEE
status: public
title: A Simplified Scheme For Hardware-Based Pattern Recognition
type: conference
user_id: '45673'
year: 2005
...