--- _id: '5425' abstract: - lang: eng text: The feasibility of inline classification and characterization of seven fruit juice varieties was investigated by the application of near-infrared spectroscopy (NIRS) combined with chemometrics. The findings are intended to be used to optimize the flash pasteurization of liquid foods. More precise information of the kind of product in real time had to be achieved to enable a more product-specific process. Using the method of partial least squares discriminant analysis, the fruit juice varieties were classified, showing a classification rate of 100% regarding an internal and 69% regarding an external test sets. A characterization by the extract content, pH value, turbidity, and viscosity was made by fitting a partial least squares regression model. The percentage prediction error of the pH value was <3% for internal and external test sets, and for the Brix value prediction errors were about 4% (internal) and 20% (external). The parameters viscosity and turbidity were found to be unsuitable. Despite this, the strategy applied to gain more product-specific information in real time showed to be feasible. By linking the results to a database containing potentially harmful microorganisms for various types of fruit juices, a more product-specific calculation of the necessary heat input can be performed. To demonstrate the practical relevance, a comparison between conventional and product-adapted process control was performed using two fruit varieties as examples in case of Alicyclobacillus acidoterrestris. Thus, with more accurate product information, achieved through the use of NIRS with chemometrics, a more precise calculation of the heat input can be achieved. author: - first_name: Imke full_name: Weishaupt, Imke id: '58425' last_name: Weishaupt - first_name: Peter full_name: Neubauer, Peter last_name: Neubauer - first_name: Jan full_name: Schneider, Jan id: '13209' last_name: Schneider orcid: 0000-0001-6401-8873 citation: ama: Weishaupt I, Neubauer P, Schneider J. Near-infrared spectroscopy for the inline classification and characterization of fruit juices for a product-customized flash pasteurization. Food Science & Nutrition. 2022;10(3):800-812. doi: https://doi.org/10.1002/fsn3.2709 apa: Weishaupt, I., Neubauer, P., & Schneider, J. (2022). Near-infrared spectroscopy for the inline classification and characterization of fruit juices for a product-customized flash pasteurization. Food Science & Nutrition, 10(3), 800–812. https://doi.org/ https://doi.org/10.1002/fsn3.2709 bjps: Weishaupt I, Neubauer P and Schneider J (2022) Near-Infrared Spectroscopy for the Inline Classification and Characterization of Fruit Juices for a Product-Customized Flash Pasteurization. Food Science & Nutrition 10, 800–812. chicago: 'Weishaupt, Imke, Peter Neubauer, and Jan Schneider. “Near-Infrared Spectroscopy for the Inline Classification and Characterization of Fruit Juices for a Product-Customized Flash Pasteurization.” Food Science & Nutrition 10, no. 3 (2022): 800–812. https://doi.org/ https://doi.org/10.1002/fsn3.2709.' chicago-de: 'Weishaupt, Imke, Peter Neubauer und Jan Schneider. 2022. Near-infrared spectroscopy for the inline classification and characterization of fruit juices for a product-customized flash pasteurization. Food Science & Nutrition 10, Nr. 3: 800–812. doi: https://doi.org/10.1002/fsn3.2709, .' din1505-2-1: 'Weishaupt, Imke ; Neubauer, Peter ; Schneider, Jan: Near-infrared spectroscopy for the inline classification and characterization of fruit juices for a product-customized flash pasteurization. In: Food Science & Nutrition Bd. 10, Wiley (2022), Nr. 3, S. 800–812' havard: I. Weishaupt, P. Neubauer, J. Schneider, Near-infrared spectroscopy for the inline classification and characterization of fruit juices for a product-customized flash pasteurization, Food Science & Nutrition. 10 (2022) 800–812. ieee: 'I. Weishaupt, P. Neubauer, and J. Schneider, “Near-infrared spectroscopy for the inline classification and characterization of fruit juices for a product-customized flash pasteurization,” Food Science & Nutrition, vol. 10, no. 3, pp. 800–812, 2022, doi: https://doi.org/10.1002/fsn3.2709.' mla: Weishaupt, Imke, et al. “Near-Infrared Spectroscopy for the Inline Classification and Characterization of Fruit Juices for a Product-Customized Flash Pasteurization.” Food Science & Nutrition, vol. 10, no. 3, 2022, pp. 800–12, https://doi.org/ https://doi.org/10.1002/fsn3.2709. short: I. Weishaupt, P. Neubauer, J. Schneider, Food Science & Nutrition 10 (2022) 800–812. ufg: 'Weishaupt, Imke/Neubauer, Peter/Schneider, Jan: Near-infrared spectroscopy for the inline classification and characterization of fruit juices for a product-customized flash pasteurization, in: Food Science & Nutrition 10 (2022), H. 3,  S. 800–812.' van: Weishaupt I, Neubauer P, Schneider J. Near-infrared spectroscopy for the inline classification and characterization of fruit juices for a product-customized flash pasteurization. Food Science & Nutrition. 2022;10(3):800–12. date_created: 2021-04-08T06:37:30Z date_updated: 2025-06-26T13:32:36Z department: - _id: DEP4000 - _id: DEP1308 doi: ' https://doi.org/10.1002/fsn3.2709' external_id: isi: - '000739093400001' pmid: - '35311170' intvolume: ' 10' isi: '1' issue: '3' keyword: - flash pasteurization - fruit juice characterization and classification - inline near-infrared spectroscopy - multivariate data analysis language: - iso: eng page: 800-812 pmid: '1' publication: Food Science & Nutrition publication_identifier: issn: - 2048-7177 publication_status: published publisher: Wiley status: public title: Near-infrared spectroscopy for the inline classification and characterization of fruit juices for a product-customized flash pasteurization type: journal_article user_id: '83781' volume: 10 year: '2022' ... --- _id: '6898' abstract: - lang: eng text: AbstractA statistical analysis is presented that investigates the dependence of team cities’ geographical distances on the effect of home advantage (HA) for 57 years of the men’s German first soccer division (“Bundesliga”), including 17,376 matches (seasons starting from 1964 to 2020). The data shows that the HA can clearly be evidenced in the past and present (statistical p‑value < 0.01) and that it also exists for negligible distances (p < 0.01). The HA and the influence of distance on the HA both significantly decreased gradually over the last decades (p < 0.01). For the first and only time, the HA reversed into an away advantage (AA) for the season 2019/2020 (p < 0.01). The influence of distance on HA has been significant (p < 0.01) in the past (before about 1990) and contributed roughly by about half, compared to a situation without HA or AA. It increases with distance and saturates at around 100 km. Such saturation behaviour is in line with results from higher divisions of other countries with similar travelling distances such as Italy, Turkey and England. However, the distance-dependent contribution to HA has been approximately halved and reduced to an insignificant amount today. Furthermore, the temporal HA reduction is significantly larger for large distances compared to short distances (p < 0.01). Reporting and quantifying a reduction (p < 0.01) of the distance-dependent contribution to HA over a time span of 57 years is novel. article_type: original author: - first_name: Nils full_name: Beckmann, Nils id: '62068' last_name: Beckmann orcid: 0000-0003-4337-7978 citation: ama: Beckmann N. Statistical influence of travelling distance on home advantage over 57 years in the men’s German first soccer division. German Journal of Exercise and Sport Research. 2021. doi:10.1007/s12662-021-00787-7 apa: Beckmann, N. (2021). Statistical influence of travelling distance on home advantage over 57 years in the men’s German first soccer division. German Journal of Exercise and Sport Research. https://doi.org/10.1007/s12662-021-00787-7 bjps: Beckmann N (2021) Statistical Influence of Travelling Distance on Home Advantage over 57 Years in the Men’s German First Soccer Division. German Journal of Exercise and Sport Research. chicago: Beckmann, Nils. “Statistical Influence of Travelling Distance on Home Advantage over 57 Years in the Men’s German First Soccer Division.” German Journal of Exercise and Sport Research, 2021. https://doi.org/10.1007/s12662-021-00787-7. chicago-de: Beckmann, Nils. 2021. Statistical influence of travelling distance on home advantage over 57 years in the men’s German first soccer division. German Journal of Exercise and Sport Research. doi:10.1007/s12662-021-00787-7, . din1505-2-1: 'Beckmann, Nils: Statistical influence of travelling distance on home advantage over 57 years in the men’s German first soccer division. In: German Journal of Exercise and Sport Research (2021)' havard: N. Beckmann, Statistical influence of travelling distance on home advantage over 57 years in the men’s German first soccer division, German Journal of Exercise and Sport Research. (2021). ieee: N. Beckmann, “Statistical influence of travelling distance on home advantage over 57 years in the men’s German first soccer division,” German Journal of Exercise and Sport Research, 2021. mla: Beckmann, Nils. “Statistical Influence of Travelling Distance on Home Advantage over 57 Years in the Men’s German First Soccer Division.” German Journal of Exercise and Sport Research, 2021, doi:10.1007/s12662-021-00787-7. short: N. Beckmann, German Journal of Exercise and Sport Research (2021). ufg: 'Beckmann, Nils (2021): Statistical influence of travelling distance on home advantage over 57 years in the men’s German first soccer division, in: German Journal of Exercise and Sport Research.' van: Beckmann N. Statistical influence of travelling distance on home advantage over 57 years in the men’s German first soccer division. German Journal of Exercise and Sport Research. 2021; date_created: 2021-12-14T15:46:58Z date_updated: 2023-03-15T13:50:08Z ddc: - '310' doi: 10.1007/s12662-021-00787-7 file: - access_level: open_access content_type: application/pdf creator: det-ysu date_created: 2021-12-14T15:48:41Z date_updated: 2021-12-14T15:48:41Z file_id: '6899' file_name: Beckmann2021_Article_StatisticalInfluenceOfTravelli.pdf file_size: 729989 relation: main_file success: 1 file_date_updated: 2021-12-14T15:48:41Z has_accepted_license: '1' keyword: - Statistical analysis - Historic development - Geographical distance - Team performance - Home and away match results - Home advantage decline language: - iso: eng main_file_link: - open_access: '1' url: https://link.springer.com/article/10.1007%2Fs12662-021-00787-7 oa: '1' publication: German Journal of Exercise and Sport Research publication_identifier: issn: - 2509-3142 - 2509-3150 publication_status: published quality_controlled: '1' status: public title: Statistical influence of travelling distance on home advantage over 57 years in the men’s German first soccer division type: journal_article user_id: '62068' year: 2021 ... --- _id: '8380' abstract: - lang: eng text: Currently, numerous single-track railway lines are disused due to economic reasons. However, they could be reactivated for a bidirectional on-demand service traffic by small vehicles that use only one rail. MonoCabs are such small cabin-like vehicles, stabilized by a system of control moment gyroscopes and a moveable mass. They could make an important contribution to improve the mobility offer especially in rural areas. This paper is focused on the vertical stabilization system of the MonoCab. This system is discussed based on a physical three body model which describes the rolling motion of the vehicle, the lateral motion of the mass and the precession motion of the gyroscope. The model is utilized for a cascaded control concept adjusting the vehicle’s roll angle and gyroscope’s gimbal angle. The proposed stabilization concept is capable of compensating both high dynamic disturbances and stationary disturbances (e. g. unbalanced loads and steady wind flows). The concept is analyzed by simulations and experimental investigations utilizing a small scaled test rig and a rapid control prototyping system. Beside transient command responses also the frequency response of the system is experimentally evaluated and used for a validation of the model and theoretical findings. author: - first_name: Martin full_name: Griese, Martin id: '52308' last_name: Griese - first_name: Fabian full_name: Kottmeier, Fabian id: '55385' last_name: Kottmeier - first_name: Thomas full_name: Schulte, Thomas id: '46242' last_name: Schulte citation: ama: Griese M, Kottmeier F, Schulte T. Vertical Control of a Self-Stabilizing Monorail Vehicle. IEEE; 2021:1-6. doi:10.1109/IECON48115.2021.9589726 apa: 'Griese, M., Kottmeier, F., & Schulte, T. (2021). Vertical control of a self-stabilizing monorail vehicle. IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society (pp. 1–6). Toronto, ON, Canada : IEEE. https://doi.org/10.1109/IECON48115.2021.9589726' bjps: Griese M, Kottmeier F and Schulte T (2021) Vertical Control of a Self-Stabilizing Monorail Vehicle. IEEE. chicago: Griese, Martin, Fabian Kottmeier, and Thomas Schulte. Vertical Control of a Self-Stabilizing Monorail Vehicle. IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society. IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2021. https://doi.org/10.1109/IECON48115.2021.9589726. chicago-de: Griese, Martin, Fabian Kottmeier und Thomas Schulte. 2021. Vertical control of a self-stabilizing monorail vehicle. IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society. IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society. IEEE. doi:10.1109/IECON48115.2021.9589726, . din1505-2-1: 'Griese, Martin ; Kottmeier, Fabian ; Schulte, Thomas: Vertical control of a self-stabilizing monorail vehicle, IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society : IEEE, 2021' havard: M. Griese, F. Kottmeier, T. Schulte, Vertical control of a self-stabilizing monorail vehicle, IEEE, 2021. ieee: M. Griese, F. Kottmeier, and T. Schulte, Vertical control of a self-stabilizing monorail vehicle. IEEE, 2021, pp. 1–6. mla: Griese, Martin, et al. “Vertical Control of a Self-Stabilizing Monorail Vehicle.” IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society, IEEE, 2021, pp. 1–6, doi:10.1109/IECON48115.2021.9589726. short: M. Griese, F. Kottmeier, T. Schulte, Vertical Control of a Self-Stabilizing Monorail Vehicle, IEEE, 2021. ufg: 'Griese, Martin et. al. (2021): Vertical control of a self-stabilizing monorail vehicle (=IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society).' van: Griese M, Kottmeier F, Schulte T. Vertical control of a self-stabilizing monorail vehicle. IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society. IEEE; 2021. (IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society). conference: end_date: 2021-10-16 location: 'Toronto, ON, Canada ' name: IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society start_date: 2021-10-13 date_created: 2022-06-22T08:45:19Z date_updated: 2023-03-15T13:50:15Z department: - _id: DEP6020 - _id: DEP5022 doi: 10.1109/IECON48115.2021.9589726 keyword: - Vehicle dynamics - Control moment gyroscope - Control system analysis - Roll stabilization - Monorail vehicles language: - iso: eng page: pp. 1-6 publication: IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society publication_identifier: isbn: - 978-1-6654-3554-3 issn: - '2577-1647 ' publication_status: published publisher: IEEE series_title: IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society status: public title: Vertical control of a self-stabilizing monorail vehicle type: conference_editor_article user_id: '56955' year: 2021 ... --- _id: '8385' abstract: - lang: eng text: Currently, numerous single-track railway lines are disused due to economic reasons. However, they could be reactivated for a bidirectional on-demand service traffic by small vehicles that use only one rail. MonoCabs are such small cabin-like vehicles, stabilized by a system of control moment gyroscopes and a moveable mass. They could make an important contribution to improve the mobility offer especially in rural areas. This paper focuses on the analytical modeling and vertical stabilization system of the MonoCab. A nonlinear dynamic model is obtained using the Lagrangian method and subsequently linearized about its equilibrium point. Which is used for the design of the cascade control system. The dynamic analysis of the system is accomplished by comparing between analytically derived model in simulink environment and same structured model in simscape multibody. This system is discussed based on a physical three body model which describes the rolling motion of the vehicle, the lateral motion of the mass and the precession motion of the gyroscope. The model is utilized for a cascaded control concept adjusting the vehicle’s roll angle and gyroscope’s precession angle. The proposed stabilization concept is capable of compensating both high dynamic disturbances and stationary disturbances (e. g. unbalanced loads and steady wind flows). The concept is analyzed by simulations and experimental investigations. Beside transient command responses also the frequency response of the system is experimentally evaluated and used for a validation of the model and theoretical findings. For the experimental validation, a small scaled test rig is used which consists of mechanical frames and flywheels, inverter-fed drives, rotary encoders, an inertial measurement unit (IMU) and a rapid control prototyping system. author: - first_name: Martin full_name: Griese, Martin id: '52308' last_name: Griese - first_name: Seyed Davood full_name: Mousavi, Seyed Davood id: '79148' last_name: Mousavi - first_name: Thomas full_name: Schulte, Thomas id: '46242' last_name: Schulte citation: ama: Griese M, Mousavi SD, Schulte T. Modeling the Vertical Dynamics of a Self-Stabilizing Monorail Vehicle. IEEE; 2021:205-210. doi:10.1109/ICCMA54375.2021.9646219 apa: 'Griese, M., Mousavi, S. D., & Schulte, T. (2021). Modeling the Vertical Dynamics of a Self-stabilizing Monorail Vehicle. 2021 9th International Conference on Control, Mechatronics and Automation (ICCMA) (pp. 205–210). Belval, Luxembourg : IEEE. https://doi.org/10.1109/ICCMA54375.2021.9646219' bjps: Griese M, Mousavi SD and Schulte T (2021) Modeling the Vertical Dynamics of a Self-Stabilizing Monorail Vehicle. IEEE. chicago: Griese, Martin, Seyed Davood Mousavi, and Thomas Schulte. Modeling the Vertical Dynamics of a Self-Stabilizing Monorail Vehicle. 2021 9th International Conference on Control, Mechatronics and Automation (ICCMA). IEEE, 2021. https://doi.org/10.1109/ICCMA54375.2021.9646219. chicago-de: Griese, Martin, Seyed Davood Mousavi und Thomas Schulte. 2021. Modeling the Vertical Dynamics of a Self-stabilizing Monorail Vehicle. 2021 9th International Conference on Control, Mechatronics and Automation (ICCMA). IEEE. doi:10.1109/ICCMA54375.2021.9646219, . din1505-2-1: 'Griese, Martin ; Mousavi, Seyed Davood ; Schulte, Thomas: Modeling the Vertical Dynamics of a Self-stabilizing Monorail Vehicle : IEEE, 2021' havard: M. Griese, S.D. Mousavi, T. Schulte, Modeling the Vertical Dynamics of a Self-stabilizing Monorail Vehicle, IEEE, 2021. ieee: M. Griese, S. D. Mousavi, and T. Schulte, Modeling the Vertical Dynamics of a Self-stabilizing Monorail Vehicle. IEEE, 2021, pp. 205–210. mla: Griese, Martin, et al. “Modeling the Vertical Dynamics of a Self-Stabilizing Monorail Vehicle.” 2021 9th International Conference on Control, Mechatronics and Automation (ICCMA), IEEE, 2021, pp. 205–10, doi:10.1109/ICCMA54375.2021.9646219. short: M. Griese, S.D. Mousavi, T. Schulte, Modeling the Vertical Dynamics of a Self-Stabilizing Monorail Vehicle, IEEE, 2021. ufg: 'Griese, Martin et. al. (2021): Modeling the Vertical Dynamics of a Self-stabilizing Monorail Vehicle.' van: Griese M, Mousavi SD, Schulte T. Modeling the Vertical Dynamics of a Self-stabilizing Monorail Vehicle. 2021 9th International Conference on Control, Mechatronics and Automation (ICCMA). IEEE; 2021. conference: end_date: 2021-11-14 location: 'Belval, Luxembourg ' name: 2021 9th International Conference on Control, Mechatronics and Automation (ICCMA) start_date: 2021-11-11 date_created: 2022-06-22T14:22:07Z date_updated: 2023-03-15T13:50:15Z department: - _id: DEP6020 - _id: DEP5022 doi: 10.1109/ICCMA54375.2021.9646219 keyword: - Vehicle dynamics - Control moment gyroscope - Control system analysis - Roll stabilization - Monorail vehicles language: - iso: eng page: 205-210 publication: 2021 9th International Conference on Control, Mechatronics and Automation (ICCMA) publication_identifier: eisbn: - 978-1-6654-1073-1 publication_status: published publisher: IEEE status: public title: Modeling the Vertical Dynamics of a Self-stabilizing Monorail Vehicle type: conference_editor_article user_id: '56955' year: 2021 ... --- _id: '1903' abstract: - lang: eng text: Because of the trend towards smaller batch sizes and customer-specific products, employees in assembly have to absorb and process more and more information. With the help of assistance systems, the process of information absorption and processing can be designed in a more economical and human-oriented way. Despite the potentials of such systems, companies pay too little attention to the informational design of assembly systems, resulting in a number of significant deficits in information management. To identify such deficits in operational practice, a questionnaire has been developed. This allows the potential use of informational assistance systems for an assembly system to be estimated. In this article, results from an exploratory factor analysis of the developed instrument will be presented and interpreted as a basis for the further development of the questionnaire. author: - first_name: Sven full_name: Bendzioch, Sven id: '71395' last_name: Bendzioch - first_name: Sven full_name: Hinrichsen, Sven id: '49010' last_name: Hinrichsen - first_name: Benjamin full_name: Adrian, Benjamin id: '42266' last_name: Adrian - first_name: Manfred full_name: Bornewasser, Manfred last_name: Bornewasser citation: ama: 'Bendzioch S, Hinrichsen S, Adrian B, Bornewasser M. Method for Measuring the Application Potential of Assembly Assistance Systems. In: Nunes IL, ed. Advances in Human Factors and Systems Interaction AHFE 2019. Vol 959. Advances in Intelligent Systems and Computing. Cham: Springer; 2020:3-11. doi:https://doi.org/10.1007/978-3-030-20040-4_1' apa: 'Bendzioch, S., Hinrichsen, S., Adrian, B., & Bornewasser, M. (2020). Method for Measuring the Application Potential of Assembly Assistance Systems. In I. L. Nunes (Ed.), Advances in Human Factors and Systems Interaction AHFE 2019 (Vol. 959, pp. 3–11). Cham: Springer. https://doi.org/10.1007/978-3-030-20040-4_1' bjps: 'Bendzioch S et al. (2020) Method for Measuring the Application Potential of Assembly Assistance Systems. In Nunes IL (ed.), Advances in Human Factors and Systems Interaction AHFE 2019, vol. 959. Cham: Springer, pp. 3–11.' chicago: 'Bendzioch, Sven, Sven Hinrichsen, Benjamin Adrian, and Manfred Bornewasser. “Method for Measuring the Application Potential of Assembly Assistance Systems.” In Advances in Human Factors and Systems Interaction AHFE 2019, edited by Isabel L. Nunes, 959:3–11. Advances in Intelligent Systems and Computing. Cham: Springer, 2020. https://doi.org/10.1007/978-3-030-20040-4_1.' chicago-de: 'Bendzioch, Sven, Sven Hinrichsen, Benjamin Adrian und Manfred Bornewasser. 2020. Method for Measuring the Application Potential of Assembly Assistance Systems. In: Advances in Human Factors and Systems Interaction AHFE 2019, hg. von Isabel L. Nunes, 959:3–11. Advances in Intelligent Systems and Computing. Cham: Springer. doi:https://doi.org/10.1007/978-3-030-20040-4_1, .' din1505-2-1: 'Bendzioch, Sven ; Hinrichsen, Sven ; Adrian, Benjamin ; Bornewasser, Manfred: Method for Measuring the Application Potential of Assembly Assistance Systems. In: Nunes, I. L. (Hrsg.): Advances in Human Factors and Systems Interaction AHFE 2019, Advances in Intelligent Systems and Computing. Bd. 959. Cham : Springer, 2020, S. 3–11' havard: 'S. Bendzioch, S. Hinrichsen, B. Adrian, M. Bornewasser, Method for Measuring the Application Potential of Assembly Assistance Systems, in: I.L. Nunes (Ed.), Advances in Human Factors and Systems Interaction AHFE 2019, Springer, Cham, 2020: pp. 3–11.' ieee: S. Bendzioch, S. Hinrichsen, B. Adrian, and M. Bornewasser, “Method for Measuring the Application Potential of Assembly Assistance Systems,” in Advances in Human Factors and Systems Interaction AHFE 2019, Washington D.C., USA, 2020, vol. 959, pp. 3–11. mla: Bendzioch, Sven, et al. “Method for Measuring the Application Potential of Assembly Assistance Systems.” Advances in Human Factors and Systems Interaction AHFE 2019, edited by Isabel L. Nunes, vol. 959, Springer, 2020, pp. 3–11, doi:https://doi.org/10.1007/978-3-030-20040-4_1. short: 'S. Bendzioch, S. Hinrichsen, B. Adrian, M. Bornewasser, in: I.L. Nunes (Ed.), Advances in Human Factors and Systems Interaction AHFE 2019, Springer, Cham, 2020, pp. 3–11.' ufg: 'Bendzioch, Sven et. al. (2020): Method for Measuring the Application Potential of Assembly Assistance Systems, in: Isabel L. Nunes (Hg.): Advances in Human Factors and Systems Interaction AHFE 2019 (=Advances in Intelligent Systems and Computing 959), Cham, S. 3–11.' van: 'Bendzioch S, Hinrichsen S, Adrian B, Bornewasser M. Method for Measuring the Application Potential of Assembly Assistance Systems. In: Nunes IL, editor. Advances in Human Factors and Systems Interaction AHFE 2019. Cham: Springer; 2020. p. 3–11. (Advances in Intelligent Systems and Computing; vol. 959).' conference: end_date: 2019-07-28 location: Washington D.C., USA name: 10th International Conference on Applied Human Factors and Ergonomics 2019 start_date: 2019-07-24 date_created: 2019-09-10T06:38:20Z date_updated: 2023-03-15T13:49:37Z department: - _id: DEP7020 - _id: DEP1305 doi: https://doi.org/10.1007/978-3-030-20040-4_1 editor: - first_name: Isabel L. full_name: Nunes, Isabel L. last_name: Nunes intvolume: ' 959' keyword: - Complexity evaluation - Manual assembly - Questionnaire - Work analysis method - Assistance systems - Exploratory factor analysis language: - iso: eng page: 3-11 place: Cham project: - _id: FBB6D104-44D9-11E9-AA25-B54CDB794CE1 name: Montexas 4.0 publication: Advances in Human Factors and Systems Interaction AHFE 2019 publication_identifier: eisbn: - 978-3-030-20040-4 isbn: - 978-3-030-20039-8 publication_status: published publisher: Springer quality_controlled: '1' series_title: Advances in Intelligent Systems and Computing status: public title: Method for Measuring the Application Potential of Assembly Assistance Systems type: conference user_id: '49010' volume: 959 year: 2020 ... --- _id: '5424' abstract: - lang: eng text: Near infrared spectroscopy in combination with a transflection probe was investigated as inline measurement in a continuous flash pasteurizer system with a sugar-water model solution. Robustness and reproducibility of fluctuations of recorded spectra as well as trueness of the chemometric analysis were compared under different process parameter settings. Variable parameters were the flow rate (from laminar flow at 30 L/h to turbulent flow at 90 L/h), temperature (20 to 100 degrees C) and the path length of the transflection probe (2 and 4 mm) while the pressure was kept constant at 2.5 bar. Temperature and path length were identified as the most affecting parameters, in case of homogenous test medium. In case of particle containing systems, the flow rate could have an impact as well. However, the application of a PLS model, which includes a broad temperature range, and the correction of prediction results by applying a polynomial regression function for prediction errors, was able to compensate these effects. Also, a path length of 2 mm leads to a higher accuracy. The applied strategy shows that by the identification of relevant process parameters and settings as well as the establishment of a compensation strategy, near infrared spectroscopy is a powerful process analytical tool for continuous flash pasteurization systems. author: - first_name: Imke full_name: Weishaupt, Imke id: '58425' last_name: Weishaupt - first_name: Manuel full_name: Zimmer, Manuel id: '71613' last_name: Zimmer orcid: 0000-0002-9974-2543 - first_name: Peter full_name: Neubauer, Peter last_name: Neubauer - first_name: Jan full_name: Schneider, Jan id: '13209' last_name: Schneider orcid: 0000-0001-6401-8873 citation: ama: Weishaupt I, Zimmer M, Neubauer P, Schneider J. Model based optimization of transflection near infrared spectroscopy as a process analytical tool in a continuous flash pasteurizer. Journal of Food Science. 2020;85(7):2020-2031. doi:10.1111/1750-3841.15307 apa: Weishaupt, I., Zimmer, M., Neubauer, P., & Schneider, J. (2020). Model based optimization of transflection near infrared spectroscopy as a process analytical tool in a continuous flash pasteurizer. Journal of Food Science, 85(7), 2020–2031. https://doi.org/10.1111/1750-3841.15307 bjps: Weishaupt I et al. (2020) Model Based Optimization of Transflection near Infrared Spectroscopy as a Process Analytical Tool in a Continuous Flash Pasteurizer. Journal of Food Science 85, 2020–2031. chicago: 'Weishaupt, Imke, Manuel Zimmer, Peter Neubauer, and Jan Schneider. “Model Based Optimization of Transflection near Infrared Spectroscopy as a Process Analytical Tool in a Continuous Flash Pasteurizer.” Journal of Food Science 85, no. 7 (2020): 2020–31. https://doi.org/10.1111/1750-3841.15307.' chicago-de: 'Weishaupt, Imke, Manuel Zimmer, Peter Neubauer und Jan Schneider. 2020. Model based optimization of transflection near infrared spectroscopy as a process analytical tool in a continuous flash pasteurizer. Journal of Food Science 85, Nr. 7: 2020–2031. doi:10.1111/1750-3841.15307, .' din1505-2-1: 'Weishaupt, Imke ; Zimmer, Manuel ; Neubauer, Peter ; Schneider, Jan: Model based optimization of transflection near infrared spectroscopy as a process analytical tool in a continuous flash pasteurizer. In: Journal of Food Science Bd. 85 (2020), Nr. 7, S. 2020–2031' havard: I. Weishaupt, M. Zimmer, P. Neubauer, J. Schneider, Model based optimization of transflection near infrared spectroscopy as a process analytical tool in a continuous flash pasteurizer, Journal of Food Science. 85 (2020) 2020–2031. ieee: 'I. Weishaupt, M. Zimmer, P. Neubauer, and J. Schneider, “Model based optimization of transflection near infrared spectroscopy as a process analytical tool in a continuous flash pasteurizer,” Journal of Food Science, vol. 85, no. 7, pp. 2020–2031, 2020, doi: 10.1111/1750-3841.15307.' mla: Weishaupt, Imke, et al. “Model Based Optimization of Transflection near Infrared Spectroscopy as a Process Analytical Tool in a Continuous Flash Pasteurizer.” Journal of Food Science, vol. 85, no. 7, 2020, pp. 2020–31, https://doi.org/10.1111/1750-3841.15307. short: I. Weishaupt, M. Zimmer, P. Neubauer, J. Schneider, Journal of Food Science 85 (2020) 2020–2031. ufg: 'Weishaupt, Imke u. a.: Model based optimization of transflection near infrared spectroscopy as a process analytical tool in a continuous flash pasteurizer, in: Journal of Food Science 85 (2020), H. 7,  S. 2020–2031.' van: Weishaupt I, Zimmer M, Neubauer P, Schneider J. Model based optimization of transflection near infrared spectroscopy as a process analytical tool in a continuous flash pasteurizer. Journal of Food Science. 2020;85(7):2020–31. date_created: 2021-04-08T06:37:30Z date_updated: 2025-06-26T13:30:26Z department: - _id: DEP1308 - _id: DEP4018 doi: 10.1111/1750-3841.15307 external_id: isi: - '000543977000001' pmid: - '32602154' intvolume: ' 85' isi: '1' issue: '7' keyword: - flash pasteurization - inline near infrared spectroscopy - multivariate data analysis - process condition influences - sugar-water-solution model beverage language: - iso: eng page: 2020 - 2031 pmid: '1' publication: Journal of Food Science publication_identifier: eissn: - 1750-3841 isbn: - 0022-1147 publication_status: published status: public title: Model based optimization of transflection near infrared spectroscopy as a process analytical tool in a continuous flash pasteurizer type: journal_article user_id: '83781' volume: 85 year: '2020' ... --- _id: '12835' abstract: - lang: eng text: Delayed-release dosage forms are mainly manufactured as batch processes and include coated tablets, pellets, or particles with gastric resistant polymers. Authors propose a novel approach using the hot-melt extrusion technique to prepare delayed release dosage forms via a continuous manufacturing process, a new trend in the pharmaceutical industry. A full factorial design was employed to correlate input variables, including stearic acid (SA) content, drug content, and pellet size with drug release properties of the pellets. PLS fit method suitably elaborated the relationship between input and output variables with reasonably good fit and goodness of prediction. All three input factors influenced drug release in enzyme-free simulated gastric fluid (SGF) after 120 min; however, SA content did not significantly affect drug dissolution in the enzyme-free simulated intestinal fluid (SIF). An optimized formulation and design space were determined by overlaying multiple contours established from regression equations. The continuous manufacturing process was successfully monitored using inline near-infrared (NIR) and inline particle size analysis, with drug load and pellet size being well-controlled within the design space. The obtained pellets released less than 5% after 120 min in SGF and more than 85% and 95% after 30 min and 45 min, respectively, after switching to SIF. (C) 2020 American Pharmacists Association (R). Published by Elsevier Inc. All rights reserved. author: - first_name: Anh Q. full_name: Vo, Anh Q. last_name: Vo - first_name: Gerd full_name: Kutz, Gerd id: '12015' last_name: Kutz - first_name: Herman full_name: He, Herman last_name: He - first_name: Sagar full_name: Narala, Sagar last_name: Narala - first_name: Suresh full_name: Bandari, Suresh last_name: Bandari - first_name: Michael A. full_name: Repka, Michael A. last_name: Repka citation: ama: 'Vo AQ, Kutz G, He H, Narala S, Bandari S, Repka MA. Continuous Manufacturing of Ketoprofen Delayed Release Pellets Using Melt Extrusion Technology: Application of QbD Design Space, Inline Near Infrared, and Inline Pellet Size Analysis. Journal of Pharmaceutical Sciences. 2020;109(12):3598-3607. doi:10.1016/j.xphs.2020.09.007' apa: 'Vo, A. Q., Kutz, G., He, H., Narala, S., Bandari, S., & Repka, M. A. (2020). Continuous Manufacturing of Ketoprofen Delayed Release Pellets Using Melt Extrusion Technology: Application of QbD Design Space, Inline Near Infrared, and Inline Pellet Size Analysis. Journal of Pharmaceutical Sciences, 109(12), 3598–3607. https://doi.org/10.1016/j.xphs.2020.09.007' bjps: 'Vo AQ et al. (2020) Continuous Manufacturing of Ketoprofen Delayed Release Pellets Using Melt Extrusion Technology: Application of QbD Design Space, Inline Near Infrared, and Inline Pellet Size Analysis. Journal of Pharmaceutical Sciences 109, 3598–3607.' chicago: 'Vo, Anh Q., Gerd Kutz, Herman He, Sagar Narala, Suresh Bandari, and Michael A. Repka. “Continuous Manufacturing of Ketoprofen Delayed Release Pellets Using Melt Extrusion Technology: Application of QbD Design Space, Inline Near Infrared, and Inline Pellet Size Analysis.” Journal of Pharmaceutical Sciences 109, no. 12 (2020): 3598–3607. https://doi.org/10.1016/j.xphs.2020.09.007.' chicago-de: 'Vo, Anh Q., Gerd Kutz, Herman He, Sagar Narala, Suresh Bandari und Michael A. Repka. 2020. Continuous Manufacturing of Ketoprofen Delayed Release Pellets Using Melt Extrusion Technology: Application of QbD Design Space, Inline Near Infrared, and Inline Pellet Size Analysis. Journal of Pharmaceutical Sciences 109, Nr. 12: 3598–3607. doi:10.1016/j.xphs.2020.09.007, .' din1505-2-1: 'Vo, Anh Q. ; Kutz, Gerd ; He, Herman ; Narala, Sagar ; Bandari, Suresh ; Repka, Michael A.: Continuous Manufacturing of Ketoprofen Delayed Release Pellets Using Melt Extrusion Technology: Application of QbD Design Space, Inline Near Infrared, and Inline Pellet Size Analysis. In: Journal of Pharmaceutical Sciences Bd. 109. Amsterdam [u.a.], Elsevier BV (2020), Nr. 12, S. 3598–3607' havard: 'A.Q. Vo, G. Kutz, H. He, S. Narala, S. Bandari, M.A. Repka, Continuous Manufacturing of Ketoprofen Delayed Release Pellets Using Melt Extrusion Technology: Application of QbD Design Space, Inline Near Infrared, and Inline Pellet Size Analysis, Journal of Pharmaceutical Sciences. 109 (2020) 3598–3607.' ieee: 'A. Q. Vo, G. Kutz, H. He, S. Narala, S. Bandari, and M. A. Repka, “Continuous Manufacturing of Ketoprofen Delayed Release Pellets Using Melt Extrusion Technology: Application of QbD Design Space, Inline Near Infrared, and Inline Pellet Size Analysis,” Journal of Pharmaceutical Sciences, vol. 109, no. 12, pp. 3598–3607, 2020, doi: 10.1016/j.xphs.2020.09.007.' mla: 'Vo, Anh Q., et al. “Continuous Manufacturing of Ketoprofen Delayed Release Pellets Using Melt Extrusion Technology: Application of QbD Design Space, Inline Near Infrared, and Inline Pellet Size Analysis.” Journal of Pharmaceutical Sciences, vol. 109, no. 12, 2020, pp. 3598–607, https://doi.org/10.1016/j.xphs.2020.09.007.' short: A.Q. Vo, G. Kutz, H. He, S. Narala, S. Bandari, M.A. Repka, Journal of Pharmaceutical Sciences 109 (2020) 3598–3607. ufg: 'Vo, Anh Q. u. a.: Continuous Manufacturing of Ketoprofen Delayed Release Pellets Using Melt Extrusion Technology: Application of QbD Design Space, Inline Near Infrared, and Inline Pellet Size Analysis, in: Journal of Pharmaceutical Sciences 109 (2020), H. 12,  S. 3598–3607.' van: 'Vo AQ, Kutz G, He H, Narala S, Bandari S, Repka MA. Continuous Manufacturing of Ketoprofen Delayed Release Pellets Using Melt Extrusion Technology: Application of QbD Design Space, Inline Near Infrared, and Inline Pellet Size Analysis. Journal of Pharmaceutical Sciences. 2020;109(12):3598–607.' date_created: 2025-04-23T08:40:12Z date_updated: 2025-06-26T13:25:32Z department: - _id: DEP4028 doi: 10.1016/j.xphs.2020.09.007 external_id: isi: - '000590406100010' intvolume: ' 109' isi: '1' issue: '12' keyword: - Continuous manufacturing - Delayed-release - FT-NIR - Inline particle size analysis - Hot melt extrusion language: - iso: eng page: 3598-3607 place: Amsterdam [u.a.] publication: Journal of Pharmaceutical Sciences publication_identifier: eissn: - 1520-6017 issn: - 0022-3549 publication_status: published publisher: Elsevier BV status: public title: 'Continuous Manufacturing of Ketoprofen Delayed Release Pellets Using Melt Extrusion Technology: Application of QbD Design Space, Inline Near Infrared, and Inline Pellet Size Analysis' type: scientific_journal_article user_id: '83781' volume: 109 year: '2020' ... --- _id: '2005' abstract: - lang: eng text: We present a method for the fast and robust linear classification of badly conditioned data. In our considerations, badly conditioned data are such data which are numerically difficult to handle. Due to, e.g. a large number of features or a large number of objects representing classes as well as noise, outliers or incompleteness, the common software computation of the discriminating linear combination of features between classes fails or is extremely time consuming. The theoretical foundations of our approach are based on the single feature ranking, which allows fast calculation of the approximative initial classification boundary. For the increasing of classification accuracy of this boundary, the refinement is performed in the lower dimensional space. Our approach is tested on several datasets from UCI Reposi-tiory. Experimental results indicate high classification accuracy of the approach. For the modern real industrial applications such a method is especially suitable in the Cyber-Physical-System environments and provides a part of the workflow for the automated classifier design author: - first_name: Helene full_name: Dörksen, Helene id: '46416' last_name: Dörksen - first_name: Volker full_name: Lohweg, Volker id: '1804' last_name: Lohweg orcid: 0000-0002-3325-7887 citation: ama: 'Dörksen H, Lohweg V. Linear Classification of Badly Conditioned Data. . In: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy; 2018. doi:10.1109/ETFA.2018.8502485' apa: Dörksen, H., & Lohweg, V. (2018). Linear Classification of Badly Conditioned Data. . In 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy. https://doi.org/10.1109/ETFA.2018.8502485 bjps: Dörksen H and Lohweg V (2018) Linear Classification of Badly Conditioned Data. . 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy. chicago: Dörksen, Helene, and Volker Lohweg. “Linear Classification of Badly Conditioned Data. .” In 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy, 2018. https://doi.org/10.1109/ETFA.2018.8502485. chicago-de: 'Dörksen, Helene und Volker Lohweg. 2018. Linear Classification of Badly Conditioned Data. . In: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy. doi:10.1109/ETFA.2018.8502485, .' din1505-2-1: 'Dörksen, Helene ; Lohweg, Volker: Linear Classification of Badly Conditioned Data. . In: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy, 2018' havard: 'H. Dörksen, V. Lohweg, Linear Classification of Badly Conditioned Data. , in: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Torino, Italy, 2018.' ieee: H. Dörksen and V. Lohweg, “Linear Classification of Badly Conditioned Data. ,” in 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Turin, Italy , 2018. mla: Dörksen, Helene, and Volker Lohweg. “Linear Classification of Badly Conditioned Data. .” 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2018, doi:10.1109/ETFA.2018.8502485. short: 'H. Dörksen, V. Lohweg, in: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Torino, Italy, 2018.' ufg: 'Dörksen, Helene/Lohweg, Volker (2018): Linear Classification of Badly Conditioned Data. , in: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Torino, Italy.' van: 'Dörksen H, Lohweg V. Linear Classification of Badly Conditioned Data. . In: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Torino, Italy; 2018.' conference: end_date: 2018-09-07 location: ' Turin, Italy ' name: ' IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA) 2018' start_date: 2018-09-04 date_created: 2019-11-25T08:35:44Z date_updated: 2023-03-15T13:49:38Z department: - _id: DEP5023 doi: 10.1109/ETFA.2018.8502485 keyword: - Task analysis - Software - Linear discriminant analysis - Dimensionality reduction - Mathematical model - Covariance matrices - Measurement language: - iso: eng main_file_link: - open_access: '1' url: https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8502485 oa: '1' place: Torino, Italy publication: 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) status: public title: 'Linear Classification of Badly Conditioned Data. ' type: conference user_id: '15514' year: 2018 ... --- _id: '2008' abstract: - lang: eng text: "We concentrate our research activities on the multivariate feature selection, which is one important part of many machine learning tasks. In partucular, Linear Discriminant Analysis [1] belongs to the state-of-the-art methods for the multivariate analysis. From the theoretical point of view, it is the well-known fact that LDA is best suitable in the case the features are Gaussian distributed.\r\nIn the theoretical part of the presented paper, we analyse the properties of the multivariate discriminant analysis with respect to the feature selection. In this context, we consider a binary supervised learning task and assume that the features are Gaussian distributed. The discriminant analysis solves the mentioned supervised learning task by maximising of the discriminant value, calculated for the linear combination of the features.\r\nThe initial LDA solution a 2 Rd is considered for all given features from the feature space X \x1A Rd. The corresponding discriminant is calculated by the formula:\r\nd(a; x1, . . . , xd) := (μ+ − μ−)2\r\n\e2+\r\n+ \e2−\r\n,\r\nwhere μ+/− are projected class means and \e2 +/− are projected class variances (with respect to a). We proof several propositions with the aim to find subsets of the features having higher discriminant value as original d(a; x1, . . . , xd). For the suitability in the real world settings, here we are interested in fast searching for such subsets.\r\nThe performance of the mentioned propositions is examined experimentally on datasets from UCI repository [2]. Several application scenarien will be discussed and tested on the datasets. In addition, tests show that the performance can be achieved also in the case the features are not Gaussian distributed." author: - first_name: Helene full_name: Dörksen, Helene id: '46416' last_name: Dörksen - first_name: Volker full_name: Lohweg, Volker id: '1804' last_name: Lohweg orcid: 0000-0002-3325-7887 citation: ama: 'Dörksen H, Lohweg V. Multivariate Gaussian Feature Selection. . In: European Conference on Data Analysis (ECDA2018). Paderborn, Germany; 2018.' apa: Dörksen, H., & Lohweg, V. (2018). Multivariate Gaussian Feature Selection. . In European Conference on Data Analysis (ECDA2018). Paderborn, Germany. bjps: Dörksen H and Lohweg V (2018) Multivariate Gaussian Feature Selection. . European Conference on Data Analysis (ECDA2018). Paderborn, Germany. chicago: Dörksen, Helene, and Volker Lohweg. “Multivariate Gaussian Feature Selection. .” In European Conference on Data Analysis (ECDA2018). Paderborn, Germany, 2018. chicago-de: 'Dörksen, Helene und Volker Lohweg. 2018. Multivariate Gaussian Feature Selection. . In: European Conference on Data Analysis (ECDA2018). Paderborn, Germany.' din1505-2-1: 'Dörksen, Helene ; Lohweg, Volker: Multivariate Gaussian Feature Selection. . In: European Conference on Data Analysis (ECDA2018). Paderborn, Germany, 2018' havard: 'H. Dörksen, V. Lohweg, Multivariate Gaussian Feature Selection. , in: European Conference on Data Analysis (ECDA2018), Paderborn, Germany, 2018.' ieee: H. Dörksen and V. Lohweg, “Multivariate Gaussian Feature Selection. ,” in European Conference on Data Analysis (ECDA2018), Paderborn, 2018. mla: Dörksen, Helene, and Volker Lohweg. “Multivariate Gaussian Feature Selection. .” European Conference on Data Analysis (ECDA2018), 2018. short: 'H. Dörksen, V. Lohweg, in: European Conference on Data Analysis (ECDA2018), Paderborn, Germany, 2018.' ufg: 'Dörksen, Helene/Lohweg, Volker (2018): Multivariate Gaussian Feature Selection. , in: European Conference on Data Analysis (ECDA2018), Paderborn, Germany.' van: 'Dörksen H, Lohweg V. Multivariate Gaussian Feature Selection. . In: European Conference on Data Analysis (ECDA2018). Paderborn, Germany; 2018.' conference: end_date: 2018-07-06 location: Paderborn name: European Conference on Data Analysis start_date: 2018-07-04 date_created: 2019-11-25T08:35:48Z date_updated: 2023-03-15T13:49:38Z department: - _id: DEP5023 keyword: - multivariate feature selection - Gaussian distribution - linear discriminant analysis language: - iso: eng place: Paderborn, Germany publication: European Conference on Data Analysis (ECDA2018) status: public title: 'Multivariate Gaussian Feature Selection. ' type: conference user_id: '15514' year: 2018 ... --- _id: '10668' abstract: - lang: eng text: Digitalization has a significant impact on our working life and it allows whole industries to rethink their value chains. This paper examines how digitalization relates to complexity in work systems with respect to relevant organizational fields of work organization. 23 semi-structured interviews with experts from science and economy were conducted and analyzed. Key findings are that digitalization has far-reaching, interrelated implications for all organizational fields. Moreover, digitalization-related aspects were identified which have the potential to increase complexity in work systems. author: - first_name: Benedikt full_name: Latos, Benedikt id: '84474' last_name: Latos - first_name: Markus full_name: Harlacher, Markus last_name: Harlacher - first_name: Philipp M. full_name: Przybysz, Philipp M. last_name: Przybysz - first_name: Susanne full_name: Mutze-Niewohner, Susanne last_name: Mutze-Niewohner citation: ama: 'Latos B, Harlacher M, Przybysz PM, Mutze-Niewohner S. Transformation of working environments through digitalization: Exploration and systematization of complexity drivers. In: 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE; 2018. doi:10.1109/ieem.2017.8290059' apa: 'Latos, B., Harlacher, M., Przybysz, P. M., & Mutze-Niewohner, S. (2018). Transformation of working environments through digitalization: Exploration and systematization of complexity drivers. 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Singapore. https://doi.org/10.1109/ieem.2017.8290059' bjps: 'Latos B et al. (2018) Transformation of Working Environments through Digitalization: Exploration and Systematization of Complexity Drivers. 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE.' chicago: 'Latos, Benedikt, Markus Harlacher, Philipp M. Przybysz, and Susanne Mutze-Niewohner. “Transformation of Working Environments through Digitalization: Exploration and Systematization of Complexity Drivers.” In 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE, 2018. https://doi.org/10.1109/ieem.2017.8290059.' chicago-de: 'Latos, Benedikt, Markus Harlacher, Philipp M. Przybysz und Susanne Mutze-Niewohner. 2018. Transformation of working environments through digitalization: Exploration and systematization of complexity drivers. In: 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE. doi:10.1109/ieem.2017.8290059, .' din1505-2-1: 'Latos, Benedikt ; Harlacher, Markus ; Przybysz, Philipp M. ; Mutze-Niewohner, Susanne: Transformation of working environments through digitalization: Exploration and systematization of complexity drivers. In: 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) : IEEE, 2018' havard: 'B. Latos, M. Harlacher, P.M. Przybysz, S. Mutze-Niewohner, Transformation of working environments through digitalization: Exploration and systematization of complexity drivers, in: 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), IEEE, 2018.' ieee: 'B. Latos, M. Harlacher, P. M. Przybysz, and S. Mutze-Niewohner, “Transformation of working environments through digitalization: Exploration and systematization of complexity drivers,” presented at the 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Singapore, 2018. doi: 10.1109/ieem.2017.8290059.' mla: 'Latos, Benedikt, et al. “Transformation of Working Environments through Digitalization: Exploration and Systematization of Complexity Drivers.” 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), IEEE, 2018, https://doi.org/10.1109/ieem.2017.8290059.' short: 'B. Latos, M. Harlacher, P.M. Przybysz, S. Mutze-Niewohner, in: 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), IEEE, 2018.' ufg: 'Latos, Benedikt u. a.: Transformation of working environments through digitalization: Exploration and systematization of complexity drivers, in: o. Hg.: 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), o. O. 2018.' van: 'Latos B, Harlacher M, Przybysz PM, Mutze-Niewohner S. Transformation of working environments through digitalization: Exploration and systematization of complexity drivers. In: 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE; 2018.' conference: end_date: 2017-12-13 location: Singapore name: 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) start_date: 2017-12-10 date_created: 2023-10-30T13:02:52Z date_updated: 2023-10-31T11:24:15Z department: - _id: DEP1522 doi: 10.1109/ieem.2017.8290059 extern: '1' keyword: - Complexity theory - Interviews - Organizations - Industries - Task analysis - Acceleration language: - iso: eng publication: 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) publication_identifier: eissn: - 2157-362X publication_status: published publisher: IEEE status: public title: 'Transformation of working environments through digitalization: Exploration and systematization of complexity drivers' type: conference user_id: '83781' year: '2018' ... --- _id: '265' abstract: - lang: eng text: The maintenance of a tool for injection molding or forming is usually accompanied by its disassembly and assembly. The duration of the assembly activities is often a large part of the total activity time for the maintenance of the tool. The degree of performance of the employees in the execution of these disassembly and assembly activities is often low. In addition, allowances occur (e.g. searching for work equipment). At the Industrial Engineering Lab of the Ostwestfalen-Lippe University of Applied Sciences, a prototype of an assistance system was developed to support the assembly activities in toolmaking. With the help of this system, the operator is guided step by step through the assembly process. The economic potential of the system exists in the reduction of training times, the avoidance of assembly errors and the increase of labor productivity. author: - first_name: Sven full_name: Hinrichsen, Sven id: '49010' last_name: Hinrichsen - first_name: Daniel full_name: Riediger, Daniel id: '52263' last_name: Riediger - first_name: Alexander full_name: Unrau, Alexander id: '64690' last_name: Unrau citation: ama: 'Hinrichsen S, Riediger D, Unrau A. Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools. In: IEEE/ IEEM, ed. 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). Danvers; 2017:1571-1575. doi:https://doi.org/10.1109/IEEM.2017.8290157' apa: Hinrichsen, S., Riediger, D., & Unrau, A. (2017). Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools. In IEEE/ IEEM (Ed.), 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) (pp. 1571–1575). Danvers. https://doi.org/10.1109/IEEM.2017.8290157 bjps: Hinrichsen S, Riediger D and Unrau A (2017) Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools. In IEEE/ IEEM (ed.), 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). Danvers, pp. 1571–1575. chicago: Hinrichsen, Sven, Daniel Riediger, and Alexander Unrau. “Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools.” In 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), edited by IEEE/ IEEM, 1571–75. Danvers, 2017. https://doi.org/10.1109/IEEM.2017.8290157. chicago-de: 'Hinrichsen, Sven, Daniel Riediger und Alexander Unrau. 2017. Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools. In: 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), hg. von IEEE/ IEEM, 1571–1575. Danvers. doi:https://doi.org/10.1109/IEEM.2017.8290157, .' din1505-2-1: 'Hinrichsen, Sven ; Riediger, Daniel ; Unrau, Alexander: Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools. In: IEEE/ IEEM (Hrsg.): 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). Danvers, 2017, S. 1571–1575' havard: 'S. Hinrichsen, D. Riediger, A. Unrau, Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools, in: IEEE/ IEEM (Ed.), 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Danvers, 2017: pp. 1571–1575.' ieee: S. Hinrichsen, D. Riediger, and A. Unrau, “Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools,” in 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Singapore, 2017, no. 1, pp. 1571–1575. mla: Hinrichsen, Sven, et al. “Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools.” 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), edited by IEEE/ IEEM, no. 1, 2017, pp. 1571–75, doi:https://doi.org/10.1109/IEEM.2017.8290157. short: 'S. Hinrichsen, D. Riediger, A. Unrau, in: IEEE/ IEEM (Ed.), 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Danvers, 2017, pp. 1571–1575.' ufg: 'Hinrichsen, Sven et. al. (2017): Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools, in: IEEE/ IEEM (Hg.): 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Danvers, S. 1571–1575.' van: 'Hinrichsen S, Riediger D, Unrau A. Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools. In: IEEE/ IEEM, editor. 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). Danvers; 2017. p. 1571–5.' conference: end_date: 2017-12-13 location: Singapore name: 'IEEE International Conference on Industrial Engineering and Engineering Management ' start_date: 2017-12-10 corporate_editor: - IEEE/ IEEM date_created: 2018-11-26T11:59:27Z date_updated: 2023-03-15T13:49:41Z ddc: - '620' department: - _id: DEP7020 - _id: DEP1305 doi: https://doi.org/10.1109/IEEM.2017.8290157 issue: '1' keyword: - injection moulding - machine tools - maintenance engineering - productivity - projection-based assistance system - injection molding tools - assembly activities - assembly process - assembly errors - tool maintenance - disassembly activities - economic potential - Industrial Engineering Lab - Ostwestfalen-Lippe University of Applied Sciences - toolmaking - Tools - Injection molding - Maintenance engineering - Usability - Task analysis - Workstations - Morphology - assembly assistance systems - assistance systems - maintenance of injection molding tools - manual assembly language: - iso: eng page: 1571-1575 place: Danvers publication: 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) publication_identifier: isbn: - '978-1-5386-0948-4 ' quality_controlled: '1' status: public title: Development of a Projection-Based Assistance System for Maintaining Injection Molding Tools type: conference user_id: '74004' year: 2017 ... --- _id: '577' abstract: - lang: eng text: A rising number of product variants together with decreasing lot sizes are a result of the trend of individualization. Besides the upcoming organizational issues, changes in the production technologies are required. Direct digital manufacturing contributes to solve this problem by enabling the production of parts right from the CAD data.Process capability analysis is applied in several industries to prove the reliable compliance of products with quality requirements. As it is based on statistical methods, new challenges arise in the context of single-part production.The paper describes and compares different approaches for the adoption of process capability analysis for single-part production with special focus on additive manufacturing technologies. The statistical background and the applicability of different capability parameters are discussed. An overview of existing research work is given and supplemented by own approaches for the adoption of statistical methods for single-part production. The aim of the research work is to establish a first approach for the qualification of new technologies in single-part production. author: - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Andrea full_name: Davis, Andrea id: '68611' last_name: Davis - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer - first_name: Eva full_name: Scheideler, Eva id: '61522' last_name: Scheideler citation: ama: 'Huxol A, Davis A, Villmer F-J, Scheideler E. Deployment of Process Capability Analysis for Single-Part Production. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Publication series in direct digital manufacturing . Lemgo; 2017:63-74.' apa: Huxol, A., Davis, A., Villmer, F.-J., & Scheideler, E. (2017). Deployment of Process Capability Analysis for Single-Part Production. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 63–74). Lemgo. bjps: Huxol A et al. (2017) Deployment of Process Capability Analysis for Single-Part Production. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 63–74. chicago: Huxol, Andrea, Andrea Davis, Franz-Josef Villmer, and Eva Scheideler. “Deployment of Process Capability Analysis for Single-Part Production.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 63–74. Publication Series in Direct Digital Manufacturing . Lemgo, 2017. chicago-de: 'Huxol, Andrea, Andrea Davis, Franz-Josef Villmer und Eva Scheideler. 2017. Deployment of Process Capability Analysis for Single-Part Production. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 63–74. Publication series in direct digital manufacturing . Lemgo.' din1505-2-1: 'Huxol, Andrea ; Davis, Andrea ; Villmer, Franz-Josef ; Scheideler, Eva: Deployment of Process Capability Analysis for Single-Part Production. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management, Publication series in direct digital manufacturing . Lemgo, 2017, S. 63–74' havard: 'A. Huxol, A. Davis, F.-J. Villmer, E. Scheideler, Deployment of Process Capability Analysis for Single-Part Production, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017: pp. 63–74.' ieee: A. Huxol, A. Davis, F.-J. Villmer, and E. Scheideler, “Deployment of Process Capability Analysis for Single-Part Production,” in Production Engineering and Management, Pordenone, Italy, 2017, no. 1, pp. 63–74. mla: Huxol, Andrea, et al. “Deployment of Process Capability Analysis for Single-Part Production.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2017, pp. 63–74. short: 'A. Huxol, A. Davis, F.-J. Villmer, E. Scheideler, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017, pp. 63–74.' ufg: 'Huxol, Andrea et. al. (2017): Deployment of Process Capability Analysis for Single-Part Production, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management (=Publication series in direct digital manufacturing ), Lemgo, S. 63–74.' van: 'Huxol A, Davis A, Villmer F-J, Scheideler E. Deployment of Process Capability Analysis for Single-Part Production. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2017. p. 63–74. (Publication series in direct digital manufacturing ).' conference: end_date: 2017-09-29 location: Pordenone, Italy name: Proceedings7th International Conference start_date: 2017-09-28 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T11:16:07Z date_updated: 2023-03-15T13:50:01Z department: - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer issue: '1' keyword: - Statistical process control - Process capability analysis - Single-part production - Process optimization language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf oa: '1' page: 63-74 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-946856-01-6 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf series_title: 'Publication series in direct digital manufacturing ' status: public title: Deployment of Process Capability Analysis for Single-Part Production type: conference user_id: '45673' year: 2017 ... --- _id: '2133' abstract: - lang: eng text: Due to the material changes of components from metal to plastic or composite materials, the structural health monitoring finds more and more interest in the industrial fields. The reason is that these materials are more vulnerable to damage or impacts which cannot be optically detected. In this contribution we present a method to analyze the structure of plastic components with piezo-electrical sensors and actuators. The components are stimulated by actuators, and sensors capture the injected vibrations. These signals are decomposed into Intrinsic Mode Functions to compute statistical features. A Fuzzy-Pattern-Classifier is applied to detect structural modifications at the components under test. author: - first_name: Alexander full_name: Dicks, Alexander id: '1853' last_name: Dicks - first_name: Volker full_name: Lohweg, Volker id: '1804' last_name: Lohweg orcid: 0000-0002-3325-7887 - first_name: Henrik full_name: Wittke, Henrik last_name: Wittke - first_name: Stefan full_name: Linke, Stefan last_name: Linke citation: ama: 'Dicks A, Lohweg V, Wittke H, Linke S. Structural Health Monitoring of Plastic Components with Piezoelectric Sensors. In: 20th IEEE International Conference on Emerging Technologies and Factory Automation. Luxembourg; 2015. doi: 10.1109/ETFA.2015.7301595' apa: Dicks, A., Lohweg, V., Wittke, H., & Linke, S. (2015). Structural Health Monitoring of Plastic Components with Piezoelectric Sensors. In 20th IEEE International Conference on Emerging Technologies and Factory Automation. Luxembourg. https://doi.org/ 10.1109/ETFA.2015.7301595 bjps: Dicks A et al. (2015) Structural Health Monitoring of Plastic Components with Piezoelectric Sensors. 20th IEEE International Conference on Emerging Technologies and Factory Automation. Luxembourg. chicago: Dicks, Alexander, Volker Lohweg, Henrik Wittke, and Stefan Linke. “Structural Health Monitoring of Plastic Components with Piezoelectric Sensors.” In 20th IEEE International Conference on Emerging Technologies and Factory Automation. Luxembourg, 2015. https://doi.org/ 10.1109/ETFA.2015.7301595. chicago-de: 'Dicks, Alexander, Volker Lohweg, Henrik Wittke und Stefan Linke. 2015. Structural Health Monitoring of Plastic Components with Piezoelectric Sensors. In: 20th IEEE International Conference on Emerging Technologies and Factory Automation. Luxembourg. doi: 10.1109/ETFA.2015.7301595, .' din1505-2-1: 'Dicks, Alexander ; Lohweg, Volker ; Wittke, Henrik ; Linke, Stefan: Structural Health Monitoring of Plastic Components with Piezoelectric Sensors. In: 20th IEEE International Conference on Emerging Technologies and Factory Automation. Luxembourg, 2015' havard: 'A. Dicks, V. Lohweg, H. Wittke, S. Linke, Structural Health Monitoring of Plastic Components with Piezoelectric Sensors, in: 20th IEEE International Conference on Emerging Technologies and Factory Automation, Luxembourg, 2015.' ieee: A. Dicks, V. Lohweg, H. Wittke, and S. Linke, “Structural Health Monitoring of Plastic Components with Piezoelectric Sensors,” in 20th IEEE International Conference on Emerging Technologies and Factory Automation, 2015. mla: Dicks, Alexander, et al. “Structural Health Monitoring of Plastic Components with Piezoelectric Sensors.” 20th IEEE International Conference on Emerging Technologies and Factory Automation, 2015, doi: 10.1109/ETFA.2015.7301595. short: 'A. Dicks, V. Lohweg, H. Wittke, S. Linke, in: 20th IEEE International Conference on Emerging Technologies and Factory Automation, Luxembourg, 2015.' ufg: 'Dicks, Alexander et. al. (2015): Structural Health Monitoring of Plastic Components with Piezoelectric Sensors, in: 20th IEEE International Conference on Emerging Technologies and Factory Automation, Luxembourg.' van: 'Dicks A, Lohweg V, Wittke H, Linke S. Structural Health Monitoring of Plastic Components with Piezoelectric Sensors. In: 20th IEEE International Conference on Emerging Technologies and Factory Automation. Luxembourg; 2015.' date_created: 2019-12-04T09:11:17Z date_updated: 2023-03-15T13:49:39Z department: - _id: DEP5023 doi: ' 10.1109/ETFA.2015.7301595' keyword: - Sensors - Actuators - Finite element analysis - Plastics - Modal analysis - Monitoring - Empirical mode decomposition language: - iso: eng place: Luxembourg publication: 20th IEEE International Conference on Emerging Technologies and Factory Automation status: public title: Structural Health Monitoring of Plastic Components with Piezoelectric Sensors type: conference user_id: '68554' year: 2015 ... --- _id: '2312' author: - first_name: Franz-Joseph full_name: Barthold, Franz-Joseph last_name: Barthold - first_name: Daniel full_name: Materna, Daniel id: '61906' last_name: Materna citation: ama: Barthold F-J, Materna D. A modified extended finite element method approach for design sensitivity analysis. International Journal for Numerical Methods in Engineering. 2015;104(3):209-234. doi:10.1002/nme.4930 apa: Barthold, F.-J., & Materna, D. (2015). A modified extended finite element method approach for design sensitivity analysis. International Journal for Numerical Methods in Engineering, 104(3), 209–234. https://doi.org/10.1002/nme.4930 bjps: Barthold F-J and Materna D (2015) A Modified Extended Finite Element Method Approach for Design Sensitivity Analysis. International Journal for Numerical Methods in Engineering 104, 209–234. chicago: 'Barthold, Franz-Joseph, and Daniel Materna. “A Modified Extended Finite Element Method Approach for Design Sensitivity Analysis.” International Journal for Numerical Methods in Engineering 104, no. 3 (2015): 209–34. https://doi.org/10.1002/nme.4930.' chicago-de: 'Barthold, Franz-Joseph und Daniel Materna. 2015. A modified extended finite element method approach for design sensitivity analysis. International Journal for Numerical Methods in Engineering 104, Nr. 3: 209–234. doi:10.1002/nme.4930, .' din1505-2-1: 'Barthold, Franz-Joseph ; Materna, Daniel: A modified extended finite element method approach for design sensitivity analysis. In: International Journal for Numerical Methods in Engineering Bd. 104, Wiley Online Library (2015), Nr. 3, S. 209–234' havard: F.-J. Barthold, D. Materna, A modified extended finite element method approach for design sensitivity analysis, International Journal for Numerical Methods in Engineering. 104 (2015) 209–234. ieee: F.-J. Barthold and D. Materna, “A modified extended finite element method approach for design sensitivity analysis,” International Journal for Numerical Methods in Engineering, vol. 104, no. 3, pp. 209–234, 2015. mla: Barthold, Franz-Joseph, and Daniel Materna. “A Modified Extended Finite Element Method Approach for Design Sensitivity Analysis.” International Journal for Numerical Methods in Engineering, vol. 104, no. 3, Wiley Online Library, 2015, pp. 209–34, doi:10.1002/nme.4930. short: F.-J. Barthold, D. Materna, International Journal for Numerical Methods in Engineering 104 (2015) 209–234. ufg: 'Barthold, Franz-Joseph/Materna, Daniel (2015): A modified extended finite element method approach for design sensitivity analysis, in: International Journal for Numerical Methods in Engineering 104 (3), S. 209–234.' van: Barthold F-J, Materna D. A modified extended finite element method approach for design sensitivity analysis. International Journal for Numerical Methods in Engineering. 2015;104(3):209–34. date_created: 2020-05-15T07:51:45Z date_updated: 2023-03-15T13:49:39Z department: - _id: DEP3020 doi: 10.1002/nme.4930 intvolume: ' 104' issue: '3' keyword: - extended finite element method - structural optimisation - sensitivity analysis language: - iso: eng main_file_link: - url: https://onlinelibrary.wiley.com/doi/full/10.1002/nme.4930 page: 209-234 publication: International Journal for Numerical Methods in Engineering publication_identifier: eissn: - 1097-0207 publication_status: published publisher: Wiley Online Library status: public title: A modified extended finite element method approach for design sensitivity analysis type: journal_article user_id: '74004' volume: 104 year: 2015 ... --- _id: '2375' abstract: - lang: eng text: Industrial wireless communication in license-free spectrum bands such as the 2.4-GHz-ISM band suffer from motion and multipath effects, which cause a high time- and frequency-variant channel attenuation. Additionally, mutual interference from heterogeneous wireless technologies limits real-time capabilities of industrial wireless technologies. Therefore, performance validations of industrial wireless technologies within appropriate industrial wireless environments are necessary. In this paper, we present the first raw measurement data set publication of an industrial wireless environment characterization in a data repository for free public access to enable transparent industrial wireless technology validation and to enhance their comparability. We characterize the whole license-free 2.4-GHz-ISM band with a time resolution of 110 μs and a frequency resolution of 1MHz in a coexistence scenario with four antennas obstructed by robot arm movements. Additionally, the frequency and time variance of the measured channel attenuations are analyzed. author: - first_name: Dimitri full_name: Block, Dimitri last_name: Block - first_name: Niels Hendrik full_name: Fliedner, Niels Hendrik last_name: Fliedner - first_name: Daniel full_name: Toews, Daniel last_name: Toews - first_name: Uwe full_name: Meier, Uwe last_name: Meier citation: ama: 'Block D, Fliedner NH, Toews D, Meier U. Wireless channel measurement data sets for reproducible performance evaluation in industrial environments. In: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA). ; 2015. doi:10.1109/etfa.2015.7301599' apa: Block, D., Fliedner, N. H., Toews, D., & Meier, U. (2015). Wireless channel measurement data sets for reproducible performance evaluation in industrial environments. In 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA). Luxembourg, Luxembourg. https://doi.org/10.1109/etfa.2015.7301599 bjps: Block D et al. (2015) Wireless Channel Measurement Data Sets for Reproducible Performance Evaluation in Industrial Environments. 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA). chicago: Block, Dimitri, Niels Hendrik Fliedner, Daniel Toews, and Uwe Meier. “Wireless Channel Measurement Data Sets for Reproducible Performance Evaluation in Industrial Environments.” In 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA), 2015. https://doi.org/10.1109/etfa.2015.7301599. chicago-de: 'Block, Dimitri, Niels Hendrik Fliedner, Daniel Toews und Uwe Meier. 2015. Wireless channel measurement data sets for reproducible performance evaluation in industrial environments. In: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA). doi:10.1109/etfa.2015.7301599, .' din1505-2-1: 'Block, Dimitri ; Fliedner, Niels Hendrik ; Toews, Daniel ; Meier, Uwe: Wireless channel measurement data sets for reproducible performance evaluation in industrial environments. In: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA), 2015' havard: 'D. Block, N.H. Fliedner, D. Toews, U. Meier, Wireless channel measurement data sets for reproducible performance evaluation in industrial environments, in: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA), 2015.' ieee: D. Block, N. H. Fliedner, D. Toews, and U. Meier, “Wireless channel measurement data sets for reproducible performance evaluation in industrial environments,” in 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA), Luxembourg, Luxembourg, 2015. mla: Block, Dimitri, et al. “Wireless Channel Measurement Data Sets for Reproducible Performance Evaluation in Industrial Environments.” 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA), 2015, doi:10.1109/etfa.2015.7301599. short: 'D. Block, N.H. Fliedner, D. Toews, U. Meier, in: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA), 2015.' ufg: 'Block, Dimitri et. al. (2015): Wireless channel measurement data sets for reproducible performance evaluation in industrial environments, in: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA).' van: 'Block D, Fliedner NH, Toews D, Meier U. Wireless channel measurement data sets for reproducible performance evaluation in industrial environments. In: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA). 2015.' conference: end_date: 2015-09-11 location: ' Luxembourg, Luxembourg' name: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA) start_date: 2015-09-08 date_created: 2020-05-18T15:20:18Z date_updated: 2023-03-15T13:49:39Z department: - _id: DEP5000 doi: 10.1109/etfa.2015.7301599 keyword: - Wireless communication - Wireless sensor networks - Antenna measurements - Attenuation measurement - Extraterrestrial measurements - Time-frequency analysis language: - iso: eng main_file_link: - url: https://ieeexplore.ieee.org/document/7301599 publication: 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA) publication_identifier: isbn: - '9781467379298' publication_status: published quality_controlled: '1' status: public title: Wireless channel measurement data sets for reproducible performance evaluation in industrial environments type: conference user_id: '57956' year: 2015 ... --- _id: '597' abstract: - lang: eng text: "This paper is aimed to discuss current research using data mining techniques and industry statistics in production environments. The general research approach is based on the idea of using data mining processes and techniques of industry statistics to find rare and hidden patterns behind failures of complex components. A case study will be applied to illustrate how the technique is carried out and where the limits of this approach occur. The case study deals with a component supplier of printing machines, which received an increasing number of client complaints, all related to one distinct problem. The observed failures seem to occur only among clients with very high quality standards. The affected component undergoes a very complex production process with several steps in different departments. Every single production unit records data information from multiple process variables and at different points in time. In the beginning there was no understanding of the failure causes in production at all. Therefore a huge amount of production data had to be analyzed to find the pattern that discloses the failure.\r\nThe data mining process starts with a first step in which the given data sets are prepared and then cleaned. Followed up by building a prediction model. The aim is to detect the root causes for failures and to predict potential failures in affected components. This paper shows how to use data mining to get the answer on pressing production failures.\r\n" author: - first_name: Eva full_name: Scheideler, Eva id: '61522' last_name: Scheideler - first_name: Andrea full_name: Ahlemeyer-Stubbe, Andrea last_name: Ahlemeyer-Stubbe citation: ama: 'Scheideler E, Ahlemeyer-Stubbe A. Data Mining: A Potential Detector to Find Failure in Complex Components. In: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy. Hochschule Ostwestfalen-Lippe; 2015:163-174.' apa: 'Scheideler, E., & Ahlemeyer-Stubbe, A. (2015). Data Mining: A Potential Detector to Find Failure in Complex Components. In E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe (Eds.), Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy (Issue 1, pp. 163–174). Hochschule Ostwestfalen-Lippe.' bjps: 'Scheideler E and Ahlemeyer-Stubbe A (2015) Data Mining: A Potential Detector to Find Failure in Complex Components. In Padoano E et al. (eds), Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy. Lemgo: Hochschule Ostwestfalen-Lippe, pp. 163–174.' chicago: 'Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Data Mining: A Potential Detector to Find Failure in Complex Components.” In Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy, edited by Elio Padoano, Franz-Josef Villmer, Department of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, 163–74. Lemgo: Hochschule Ostwestfalen-Lippe, 2015.' chicago-de: 'Scheideler, Eva und Andrea Ahlemeyer-Stubbe. 2015. Data Mining: A Potential Detector to Find Failure in Complex Components. In: Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy, hg. von Elio Padoano, Franz-Josef Villmer, Department of Production Engineering and Management, und Hochschule Ostwestfalen-Lippe, 163–174. Lemgo: Hochschule Ostwestfalen-Lippe.' din1505-2-1: 'Scheideler, Eva ; Ahlemeyer-Stubbe, Andrea: Data Mining: A Potential Detector to Find Failure in Complex Components. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management ; Hochschule Ostwestfalen-Lippe (Hrsg.): Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy. Lemgo : Hochschule Ostwestfalen-Lippe, 2015, S. 163–174' havard: 'E. Scheideler, A. Ahlemeyer-Stubbe, Data Mining: A Potential Detector to Find Failure in Complex Components, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy, Hochschule Ostwestfalen-Lippe, Lemgo, 2015: pp. 163–174.' ieee: 'E. Scheideler and A. Ahlemeyer-Stubbe, “Data Mining: A Potential Detector to Find Failure in Complex Components,” in Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy, Trieste, Italy, 2015, no. 1, pp. 163–174.' mla: 'Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Data Mining: A Potential Detector to Find Failure in Complex Components.” Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy, edited by Elio Padoano et al., no. 1, Hochschule Ostwestfalen-Lippe, 2015, pp. 163–74.' short: 'E. Scheideler, A. Ahlemeyer-Stubbe, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management : Proceedings, 5th International Conference, October 1 and 2, 2015, Trieste, Italy, Hochschule Ostwestfalen-Lippe, Lemgo, 2015, pp. 163–174.' ufg: 'Scheideler, Eva/Ahlemeyer-Stubbe, Andrea: Data Mining: A Potential Detector to Find Failure in Complex Components, in: Padoano, Elio u. a. (Hgg.): Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy, Lemgo 2015,  S. 163–174.' van: 'Scheideler E, Ahlemeyer-Stubbe A. Data Mining: A Potential Detector to Find Failure in Complex Components. In: Padoano E, Villmer FJ, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, editors. Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy. Lemgo: Hochschule Ostwestfalen-Lippe; 2015. p. 163–74.' conference: end_date: 2015-10-02 location: Trieste, Italy name: '5th International Conference "Production Engineering and Management" ' start_date: 2015-10-01 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-19T07:15:57Z date_updated: 2024-03-22T13:12:47Z department: - _id: DEP7000 - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer issue: '1' keyword: - Data mining - production failure - multi-variant analysis - multivariate process control - predictive modelling - case study language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf oa: '1' page: 163-174 place: Lemgo publication: 'Production engineering and management : proceedings, 5th international conference, October 1 and 2, 2015, Trieste, Italy' publication_identifier: isbn: - 978-3-941645-11-0 publication_status: published publisher: Hochschule Ostwestfalen-Lippe related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf status: public title: 'Data Mining: A Potential Detector to Find Failure in Complex Components' type: conference user_id: '83781' year: '2015' ... --- _id: '4373' abstract: - lang: eng text: Today, usability measures for the evaluation of systems and interfaces are mostly assessed in an isolated way. This paper addresses the question whether an integrative multi-dimensional feature evaluation can lead to different and more holistic results. We combined traditional measures (e.g., time to task completion) with advanced measures, like eye tracking, biosignal data logging and assessment of user emotions. For the evaluation of emotions, we used verbal methods (PAD Semantic Scale and a questionnaire) and a nonverbal method with EmoCards. The overall goal was to document and analyze the interaction as completely as possible (including effectiveness, efficiency and user satisfaction), focusing especially on objective measurements. Furthermore, the recording and assessment of emotions, which are part of the user experience, should give insights into user satisfaction. author: - first_name: Verena full_name: Ermes, Verena last_name: Ermes - first_name: Armin full_name: Janß, Armin last_name: Janß - first_name: Klaus full_name: Radermacher, Klaus last_name: Radermacher - first_name: Carsten full_name: Röcker, Carsten id: '61525' last_name: Röcker citation: ama: 'Ermes V, Janß A, Radermacher K, Röcker C. Analyzing the Benefits of Integrative Multi-Dimensional Assessments of Usability Features in Interaction-Centered User Studies. In: Hein A, Association for Computing Machinery-Digital Library, eds. Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare . Brussels, Belgium : ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering); 2014:227-230. doi:10.4108/icst.pervasivehealth.2014.255142#d73284787e1' apa: 'Ermes, V., Janß, A., Radermacher, K., & Röcker, C. (2014). Analyzing the Benefits of Integrative Multi-Dimensional Assessments of Usability Features in Interaction-Centered User Studies. In A. Hein & Association for Computing Machinery-Digital Library (Eds.), Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare (pp. 227–230). Brussels, Belgium : ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering). https://doi.org/10.4108/icst.pervasivehealth.2014.255142#d73284787e1' bjps: 'Ermes V et al. (2014) Analyzing the Benefits of Integrative Multi-Dimensional Assessments of Usability Features in Interaction-Centered User Studies. In Hein A and Association for Computing Machinery-Digital Library (eds), Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare . Brussels, Belgium : ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering), pp. 227–230.' chicago: 'Ermes, Verena, Armin Janß, Klaus Radermacher, and Carsten Röcker. “Analyzing the Benefits of Integrative Multi-Dimensional Assessments of Usability Features in Interaction-Centered User Studies.” In Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare , edited by Andreas Hein and Association for Computing Machinery-Digital Library, 227–30. Brussels, Belgium : ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering), 2014. https://doi.org/10.4108/icst.pervasivehealth.2014.255142#d73284787e1.' chicago-de: 'Ermes, Verena, Armin Janß, Klaus Radermacher und Carsten Röcker. 2014. Analyzing the Benefits of Integrative Multi-Dimensional Assessments of Usability Features in Interaction-Centered User Studies. In: Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare , hg. von Andreas Hein und Association for Computing Machinery-Digital Library, 227–230. Brussels, Belgium : ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering). doi:10.4108/icst.pervasivehealth.2014.255142#d73284787e1, .' din1505-2-1: 'Ermes, Verena ; Janß, Armin ; Radermacher, Klaus ; Röcker, Carsten: Analyzing the Benefits of Integrative Multi-Dimensional Assessments of Usability Features in Interaction-Centered User Studies. In: Hein, A. ; Association for Computing Machinery-Digital Library (Hrsg.): Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare . Brussels, Belgium  : ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering), 2014, S. 227–230' havard: 'V. Ermes, A. Janß, K. Radermacher, C. Röcker, Analyzing the Benefits of Integrative Multi-Dimensional Assessments of Usability Features in Interaction-Centered User Studies, in: A. Hein, Association for Computing Machinery-Digital Library (Eds.), Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare , ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering), Brussels, Belgium , 2014: pp. 227–230.' ieee: V. Ermes, A. Janß, K. Radermacher, and C. Röcker, “Analyzing the Benefits of Integrative Multi-Dimensional Assessments of Usability Features in Interaction-Centered User Studies,” in Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare , Oldenburg, 2014, pp. 227–230. mla: Ermes, Verena, et al. “Analyzing the Benefits of Integrative Multi-Dimensional Assessments of Usability Features in Interaction-Centered User Studies.” Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare , edited by Andreas Hein and Association for Computing Machinery-Digital Library, ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering), 2014, pp. 227–30, doi:10.4108/icst.pervasivehealth.2014.255142#d73284787e1. short: 'V. Ermes, A. Janß, K. Radermacher, C. Röcker, in: A. Hein, Association for Computing Machinery-Digital Library (Eds.), Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare , ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering), Brussels, Belgium , 2014, pp. 227–230.' ufg: 'Ermes, Verena et. al. (2014): Analyzing the Benefits of Integrative Multi-Dimensional Assessments of Usability Features in Interaction-Centered User Studies, in: Andreas Hein/Association for Computing Machinery-Digital Library (Hgg.): Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare , Brussels, Belgium , S. 227–230.' van: 'Ermes V, Janß A, Radermacher K, Röcker C. Analyzing the Benefits of Integrative Multi-Dimensional Assessments of Usability Features in Interaction-Centered User Studies. In: Hein A, Association for Computing Machinery-Digital Library, editors. Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare . Brussels, Belgium : ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering); 2014. p. 227–30.' conference: end_date: 2014-05-23 location: Oldenburg name: 8th International Conference on Pervasive Computing Technologies for Healthcare start_date: 2014-05-20 corporate_editor: - Association for Computing Machinery-Digital Library - ACM Special Interest Group on Computer-Human Interaction date_created: 2021-01-14T10:13:21Z date_updated: 2023-03-15T13:49:52Z department: - _id: DEP5023 doi: 10.4108/icst.pervasivehealth.2014.255142#d73284787e1 editor: - first_name: Andreas full_name: Hein, Andreas last_name: Hein extern: '1' keyword: - Usability Measures - User Experience - Eye Tracking - Biosignal Data Logging - Emotion Evaluation - Risk Analysis - Medical Devices - Integrated Usability Evaluation language: - iso: eng main_file_link: - open_access: '1' oa: '1' page: 227 - 230 place: 'Brussels, Belgium ' publication: 'Proceedings of the 8th International Conference on Pervasive Computing Technologies for Healthcare ' publication_identifier: unknown: - 978-1-63190-011-2 publication_status: published publisher: ' ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering)' related_material: link: - relation: original url: https://doi.org/10.4108/icst.pervasivehealth.2014.255142 status: public title: Analyzing the Benefits of Integrative Multi-Dimensional Assessments of Usability Features in Interaction-Centered User Studies type: conference user_id: '15514' year: 2014 ... --- _id: '10068' abstract: - lang: eng text: Currently, cities are confronting a multitude of challenges including climate change, demographic change, urbanization and land subsidence. Resulting flooding, droughts and other disturbances could lead to water shortages, severe interruptions, hydraulic problems or underutilization of water infrastructure systems. One way that cities can become more resilient is by diversifying their water resources and reducing their dependency on central water infrastructures. Water infrastructure systems consisting of decentral or semi-central partial systems would be more resilient because a failure in these systems would only affect a small part of the urban area. Instead of an incremental improvement of the water infrastructure, there is a need for system innovations that will allow an adaptive development to changing conditions and which will ensure that future sustainability challenges are met. However, moving towards more resilient water technologies is seen as controversial for built-up areas. To answer the question if a transformation to a more resilient water infrastructure in built-up areas is feasible (technically and economically), a balancing and assessment of the corresponding effects have been done by way of comparing a “transformation” scenario with a reference scenario “business as usual”. If one takes a long-term period of observation (70 years), the costs balance of the scenarios “reference” and “transformation” both turn out to be on a comparative level. By contrast, the consumption of environmental resources in the scenario “transformation” is almost twice as low as in the “reference”. author: - first_name: Engelbert full_name: Schramm, Engelbert last_name: Schramm - first_name: Jörg full_name: Felmeden, Jörg id: '81335' last_name: Felmeden citation: ama: 'Schramm E, Felmeden J. Towards More Resilient Water Infrastructures. In: Zimmermann KO, ed. Resilient Cities 2 : Cities and Adaptation to Climate Change – Proceedings of the Global Forum 2011 . Vol 2. Local sustainability. Springer Dordrecht; 2012:177-186. doi:https://doi.org/10.1007/978-94-007-4223-9_19' apa: 'Schramm, E., & Felmeden, J. (2012). Towards More Resilient Water Infrastructures. In K. O. Zimmermann (Ed.), Resilient Cities 2 : Cities and Adaptation to Climate Change – Proceedings of the Global Forum 2011 (Vol. 2, pp. 177–186). Springer Dordrecht. https://doi.org/10.1007/978-94-007-4223-9_19' bjps: 'Schramm E and Felmeden J (2012) Towards More Resilient Water Infrastructures. In Zimmermann KO (ed.), Resilient Cities 2 : Cities and Adaptation to Climate Change – Proceedings of the Global Forum 2011 , vol. 2. Dordrecht: Springer Dordrecht, pp. 177–186.' chicago: 'Schramm, Engelbert, and Jörg Felmeden. “Towards More Resilient Water Infrastructures.” In Resilient Cities 2 : Cities and Adaptation to Climate Change – Proceedings of the Global Forum 2011 , edited by Karl Otto Zimmermann, 2:177–86. Local Sustainability. Dordrecht: Springer Dordrecht, 2012. https://doi.org/10.1007/978-94-007-4223-9_19.' chicago-de: 'Schramm, Engelbert und Jörg Felmeden. 2012. Towards More Resilient Water Infrastructures. In: Resilient Cities 2 : Cities and Adaptation to Climate Change – Proceedings of the Global Forum 2011 , hg. von Karl Otto Zimmermann, 2:177–186. Local sustainability. Dordrecht: Springer Dordrecht. doi:https://doi.org/10.1007/978-94-007-4223-9_19, .' din1505-2-1: 'Schramm, Engelbert ; Felmeden, Jörg: Towards More Resilient Water Infrastructures. In: Zimmermann, K. O. (Hrsg.): Resilient Cities 2 : Cities and Adaptation to Climate Change – Proceedings of the Global Forum 2011 , Local sustainability. Bd. 2. Dordrecht : Springer Dordrecht, 2012, S. 177–186' havard: 'E. Schramm, J. Felmeden, Towards More Resilient Water Infrastructures, in: K.O. Zimmermann (Ed.), Resilient Cities 2 : Cities and Adaptation to Climate Change – Proceedings of the Global Forum 2011 , Springer Dordrecht, Dordrecht, 2012: pp. 177–186.' ieee: 'E. Schramm and J. Felmeden, “Towards More Resilient Water Infrastructures,” in Resilient Cities 2 : Cities and Adaptation to Climate Change – Proceedings of the Global Forum 2011 , vol. 2, K. O. Zimmermann, Ed. Dordrecht: Springer Dordrecht, 2012, pp. 177–186. doi: https://doi.org/10.1007/978-94-007-4223-9_19.' mla: 'Schramm, Engelbert, and Jörg Felmeden. “Towards More Resilient Water Infrastructures.” Resilient Cities 2 : Cities and Adaptation to Climate Change – Proceedings of the Global Forum 2011 , edited by Karl Otto Zimmermann, vol. 2, Springer Dordrecht, 2012, pp. 177–86, https://doi.org/10.1007/978-94-007-4223-9_19.' short: 'E. Schramm, J. Felmeden, in: K.O. Zimmermann (Ed.), Resilient Cities 2 : Cities and Adaptation to Climate Change – Proceedings of the Global Forum 2011 , Springer Dordrecht, Dordrecht, 2012, pp. 177–186.' ufg: 'Schramm, Engelbert/Felmeden, Jörg: Towards More Resilient Water Infrastructures, in: Zimmermann, Karl Otto (Hg.): Resilient Cities 2 : Cities and Adaptation to Climate Change – Proceedings of the Global Forum 2011 , Bd. 2, Dordrecht 2012 (Local sustainability),  S. 177–186.' van: 'Schramm E, Felmeden J. Towards More Resilient Water Infrastructures. In: Zimmermann KO, editor. Resilient Cities 2 : Cities and Adaptation to Climate Change – Proceedings of the Global Forum 2011 . Dordrecht: Springer Dordrecht; 2012. p. 177–86. (Local sustainability; vol. 2).' conference: end_date: 2011-06-05 location: Bonn name: 'Proceedings of the Global Forum 2011 ' start_date: 2011-06-03 date_created: 2023-06-30T06:30:30Z date_updated: 2023-07-05T14:53:26Z department: - _id: DEP3021 doi: https://doi.org/10.1007/978-94-007-4223-9_19 editor: - first_name: Karl Otto full_name: Zimmermann, Karl Otto last_name: Zimmermann extern: '1' intvolume: ' 2' keyword: - Climate change - Eco-efficiency analysis - System innovations - Vulnerability - Water infrastructure language: - iso: eng page: 177–186 place: Dordrecht publication: 'Resilient Cities 2 : Cities and Adaptation to Climate Change – Proceedings of the Global Forum 2011 ' publication_identifier: eisbn: - '978-94-007-4223-9 ' eissn: - '2211-2790 ' isbn: - 978-94-007-9776-5 - 978-94-007-4222-2 issn: - '2211-2782 ' publication_status: published publisher: Springer Dordrecht related_material: link: - relation: confirmation url: https://www.springer.com/us/book/9789400742222 series_title: Local sustainability status: public title: Towards More Resilient Water Infrastructures type: book_chapter user_id: '83781' volume: 2 year: '2012' ... --- _id: '2068' abstract: - lang: eng text: The production of printing goods is laborious. Furthermore, the print quality, especially in banknotes, must be assured. It is accepted, that print defects are generated because printing parameters, also machine parameters can change unnoticed. Therefore, a combined concept for a multi-sensory learning and classification model based on new adaptive fuzzy-pattern-classifiers for data inspection is proposed. This inspection concept, which combines optical, acoustical and other machine information, comes up with a large amount of data, which leads to multivariate methods for data analysis. Multivariate methods are useful for analysis of large and complex data sets that consist of many variables measured on large numbers of physical data. author: - first_name: Walter full_name: Dyck, Walter last_name: Dyck - first_name: Thomas full_name: Türke, Thomas last_name: Türke - first_name: Johannes full_name: Schaede, Johannes id: '2128' last_name: Schaede - first_name: Volker full_name: Lohweg, Volker id: '1804' last_name: Lohweg orcid: 0000-0002-3325-7887 citation: ama: 'Dyck W, Türke T, Schaede J, Lohweg V. A Fuzzy-Pattern-Classifier-Based Adaptive Learning Model for Sensor Fusion. In: Thessaloniki, Greece: MLSP 2007 - International Workshop on MACHINE LEARNING FOR SIGNAL PROCESSING; 2007:accepted for publication. doi:10.1109/MLSP.2007.4414320' apa: 'Dyck, W., Türke, T., Schaede, J., & Lohweg, V. (2007). A Fuzzy-Pattern-Classifier-Based Adaptive Learning Model for Sensor Fusion (p. accepted for publication). Thessaloniki, Greece: MLSP 2007 - International Workshop on MACHINE LEARNING FOR SIGNAL PROCESSING. https://doi.org/10.1109/MLSP.2007.4414320' bjps: 'Dyck W et al. (2007) A Fuzzy-Pattern-Classifier-Based Adaptive Learning Model for Sensor Fusion. Thessaloniki, Greece: MLSP 2007 - International Workshop on MACHINE LEARNING FOR SIGNAL PROCESSING, p. accepted for publication.' chicago: 'Dyck, Walter, Thomas Türke, Johannes Schaede, and Volker Lohweg. “A Fuzzy-Pattern-Classifier-Based Adaptive Learning Model for Sensor Fusion,” accepted for publication. Thessaloniki, Greece: MLSP 2007 - International Workshop on MACHINE LEARNING FOR SIGNAL PROCESSING, 2007. https://doi.org/10.1109/MLSP.2007.4414320.' chicago-de: 'Dyck, Walter, Thomas Türke, Johannes Schaede und Volker Lohweg. 2007. A Fuzzy-Pattern-Classifier-Based Adaptive Learning Model for Sensor Fusion. In: , accepted for publication. Thessaloniki, Greece: MLSP 2007 - International Workshop on MACHINE LEARNING FOR SIGNAL PROCESSING. doi:10.1109/MLSP.2007.4414320, .' din1505-2-1: 'Dyck, Walter ; Türke, Thomas ; Schaede, Johannes ; Lohweg, Volker: A Fuzzy-Pattern-Classifier-Based Adaptive Learning Model for Sensor Fusion. In: . Thessaloniki, Greece : MLSP 2007 - International Workshop on MACHINE LEARNING FOR SIGNAL PROCESSING, 2007, S. accepted for publication' havard: 'W. Dyck, T. Türke, J. Schaede, V. Lohweg, A Fuzzy-Pattern-Classifier-Based Adaptive Learning Model for Sensor Fusion, in: MLSP 2007 - International Workshop on MACHINE LEARNING FOR SIGNAL PROCESSING, Thessaloniki, Greece, 2007: p. accepted for publication.' ieee: W. Dyck, T. Türke, J. Schaede, and V. Lohweg, “A Fuzzy-Pattern-Classifier-Based Adaptive Learning Model for Sensor Fusion,” 2007, p. accepted for publication. mla: Dyck, Walter, et al. A Fuzzy-Pattern-Classifier-Based Adaptive Learning Model for Sensor Fusion. MLSP 2007 - International Workshop on MACHINE LEARNING FOR SIGNAL PROCESSING, 2007, p. accepted for publication, doi:10.1109/MLSP.2007.4414320. short: 'W. Dyck, T. Türke, J. Schaede, V. Lohweg, in: MLSP 2007 - International Workshop on MACHINE LEARNING FOR SIGNAL PROCESSING, Thessaloniki, Greece, 2007, p. accepted for publication.' ufg: 'Dyck, Walter et. al. (2007): A Fuzzy-Pattern-Classifier-Based Adaptive Learning Model for Sensor Fusion, in: , Thessaloniki, Greece, S. accepted for publication.' van: 'Dyck W, Türke T, Schaede J, Lohweg V. A Fuzzy-Pattern-Classifier-Based Adaptive Learning Model for Sensor Fusion. In Thessaloniki, Greece: MLSP 2007 - International Workshop on MACHINE LEARNING FOR SIGNAL PROCESSING; 2007. p. accepted for publication.' date_created: 2019-11-29T13:50:28Z date_updated: 2023-03-15T13:49:38Z department: - _id: DEP5023 doi: 10.1109/MLSP.2007.4414320 keyword: - Sensor fusion - Inspection - Optical sensors - Printing machinery - Data security - Data analysis - Production - Degradation - Principal component analysis - Karhunen-Loeve transforms language: - iso: eng main_file_link: - url: https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=4414320&tag=1 page: accepted for publication place: Thessaloniki, Greece publication_identifier: eisbn: - 978-1-4244-1566-3 isbn: - 978-1-4244-1565-6 issn: - '1551-2541 ' unknown: - '2378-928X ' publication_status: published publisher: MLSP 2007 - International Workshop on MACHINE LEARNING FOR SIGNAL PROCESSING status: public title: A Fuzzy-Pattern-Classifier-Based Adaptive Learning Model for Sensor Fusion type: conference user_id: '45673' year: 2007 ... --- _id: '2058' abstract: - lang: eng text: Nonlinear spatial transforms and fuzzy pattern classification with unimodal potential functions are established in signal processing. They have proved to be excellent tools in feature extraction and classification. In this paper we present a hardware accelerated image processing and classification scheme for rotation and translation tolerant two-dimensional pattern recognition, which is based on one-dimensional nonlinear discrete circular transforms. However, the scheme is simple; it is stable and therefore well suited for industrial applications. An implementation on one field programmable gate array (FPGA) is proposed. author: - first_name: Tobias full_name: Henke, Tobias last_name: Henke - first_name: Volker full_name: Lohweg, Volker id: '1804' last_name: Lohweg orcid: 0000-0002-3325-7887 citation: ama: 'Henke T, Lohweg V. A Simplified Scheme For Hardware-Based Pattern Recognition. In: IEEE International Conference On Image Processing (ICIP), Proceedings. Genova: IEEE; 2005:349-352. doi: 10.1109/ICIP.2005.1529759' apa: 'Henke, T., & Lohweg, V. (2005). A Simplified Scheme For Hardware-Based Pattern Recognition. In IEEE International Conference On Image Processing (ICIP), Proceedings (pp. 349–352). Genova: IEEE. https://doi.org/ 10.1109/ICIP.2005.1529759' bjps: 'Henke T and Lohweg V (2005) A Simplified Scheme For Hardware-Based Pattern Recognition. IEEE International Conference On Image Processing (ICIP), Proceedings. Genova: IEEE, pp. 349–352.' chicago: 'Henke, Tobias, and Volker Lohweg. “A Simplified Scheme For Hardware-Based Pattern Recognition.” In IEEE International Conference On Image Processing (ICIP), Proceedings, 349–52. Genova: IEEE, 2005. https://doi.org/ 10.1109/ICIP.2005.1529759.' chicago-de: 'Henke, Tobias und Volker Lohweg. 2005. A Simplified Scheme For Hardware-Based Pattern Recognition. In: IEEE International Conference On Image Processing (ICIP), Proceedings, 349–352. Genova: IEEE. doi: 10.1109/ICIP.2005.1529759, .' din1505-2-1: 'Henke, Tobias ; Lohweg, Volker: A Simplified Scheme For Hardware-Based Pattern Recognition. In: IEEE International Conference On Image Processing (ICIP), Proceedings. Genova : IEEE, 2005, S. 349–352' havard: 'T. Henke, V. Lohweg, A Simplified Scheme For Hardware-Based Pattern Recognition, in: IEEE International Conference On Image Processing (ICIP), Proceedings, IEEE, Genova, 2005: pp. 349–352.' ieee: T. Henke and V. Lohweg, “A Simplified Scheme For Hardware-Based Pattern Recognition,” in IEEE International Conference On Image Processing (ICIP), Proceedings, 2005, pp. 349–352. mla: Henke, Tobias, and Volker Lohweg. “A Simplified Scheme For Hardware-Based Pattern Recognition.” IEEE International Conference On Image Processing (ICIP), Proceedings, IEEE, 2005, pp. 349–52, doi: 10.1109/ICIP.2005.1529759. short: 'T. Henke, V. Lohweg, in: IEEE International Conference On Image Processing (ICIP), Proceedings, IEEE, Genova, 2005, pp. 349–352.' ufg: 'Henke, Tobias/Lohweg, Volker (2005): A Simplified Scheme For Hardware-Based Pattern Recognition, in: IEEE International Conference On Image Processing (ICIP), Proceedings, Genova, S. 349–352.' van: 'Henke T, Lohweg V. A Simplified Scheme For Hardware-Based Pattern Recognition. In: IEEE International Conference On Image Processing (ICIP), Proceedings. Genova: IEEE; 2005. p. 349–52.' date_created: 2019-11-29T13:17:49Z date_updated: 2023-03-15T13:49:38Z department: - _id: DEP5023 doi: ' 10.1109/ICIP.2005.1529759' keyword: - Pattern recognition - Field programmable gate arrays - Neural networks - Image processing - Discrete transforms - Signal processing - Image retrieval - Image recognition - Transient analysis - Fuzzy systems language: - iso: eng main_file_link: - url: https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=1529759 page: 349 - 352 place: Genova publication: IEEE International Conference On Image Processing (ICIP), Proceedings publication_identifier: eissn: - '2381-8549 ' isbn: - 0-7803-9134-9 issn: - '1522-4880 ' publication_status: published publisher: IEEE status: public title: A Simplified Scheme For Hardware-Based Pattern Recognition type: conference user_id: '45673' year: 2005 ...