---
_id: '611'
abstract:
- lang: eng
text: Empirical research shows that the informational design of manual assembly
systems is becoming increasingly important in the light of growing complexity.
Assembly assistance systems supply employees with information according to their
needs and individual situation. This article aims to present important principles
for the design of informational assembly assistance systems. The empirical basis
for these principles is formed by projects involving the introduction of informational
assistance systems for assembly work. The trends and design recommendations are
explained using a model, which illustrates important associations between the
complexity of assembly tasks, the demands on the mental capacity of employees,
work productivity and the use of assembly assistance systems.
author:
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Manfred
full_name: Bornewasser, Manfred
last_name: Bornewasser
citation:
ama: 'Hinrichsen S, Bornewasser M. How to Design Assembly Assistance Systems. In:
Karwowski W, Ahram T, eds. Advances in Intelligent Systems and Computing.
Cham: Springer International Publishing; 2019:286-292. doi:10.1007/978-3-030-11051-2_44'
apa: 'Hinrichsen, S., & Bornewasser, M. (2019). How to Design Assembly Assistance
Systems. In W. Karwowski & T. Ahram (Eds.), Advances in Intelligent Systems
and Computing (pp. 286–292). Cham: Springer International Publishing. https://doi.org/10.1007/978-3-030-11051-2_44'
bjps: 'Hinrichsen S and Bornewasser M (2019) How to Design Assembly Assistance
Systems. In Karwowski W and Ahram T (eds), Advances in Intelligent Systems
and Computing. Cham: Springer International Publishing, pp. 286–292.'
chicago: 'Hinrichsen, Sven, and Manfred Bornewasser. “How to Design Assembly Assistance
Systems.” In Advances in Intelligent Systems and Computing, edited by Waldemar Karwowski
and Tareq Ahram, 286–92. Cham: Springer International Publishing, 2019. https://doi.org/10.1007/978-3-030-11051-2_44.'
chicago-de: 'Hinrichsen, Sven und Manfred Bornewasser. 2019. How to Design Assembly
Assistance Systems. In: Advances in Intelligent Systems and Computing,
hg. von Waldemar Karwowski und Tareq Ahram, 286–292. Cham: Springer International
Publishing. doi:10.1007/978-3-030-11051-2_44,
.'
din1505-2-1: 'Hinrichsen, Sven ; Bornewasser, Manfred: How to Design Assembly
Assistance Systems. In: Karwowski, W.
; Ahram, T. (Hrsg.): Advances
in Intelligent Systems and Computing. Cham : Springer International Publishing,
2019, S. 286–292'
havard: 'S. Hinrichsen, M. Bornewasser, How to Design Assembly Assistance Systems,
in: W. Karwowski, T. Ahram (Eds.), Advances in Intelligent Systems and Computing,
Springer International Publishing, Cham, 2019: pp. 286–292.'
ieee: S. Hinrichsen and M. Bornewasser, “How to Design Assembly Assistance Systems,”
in Advances in Intelligent Systems and Computing, San Diego, USA, 2019,
pp. 286–292.
mla: Hinrichsen, Sven, and Manfred Bornewasser. “How to Design Assembly Assistance
Systems.” Advances in Intelligent Systems and Computing, edited by Waldemar Karwowski
and Tareq Ahram, Springer International Publishing, 2019, pp. 286–92, doi:10.1007/978-3-030-11051-2_44.
short: 'S. Hinrichsen, M. Bornewasser, in: W. Karwowski, T. Ahram (Eds.), Advances
in Intelligent Systems and Computing, Springer International Publishing, Cham,
2019, pp. 286–292.'
ufg: 'Hinrichsen, Sven/Bornewasser, Manfred (2019): How to Design Assembly
Assistance Systems, in: Waldemar Karwowski/Tareq Ahram (Hgg.): Advances in
Intelligent Systems and Computing, Cham, S. 286–292.'
van: 'Hinrichsen S, Bornewasser M. How to Design Assembly Assistance Systems. In:
Karwowski W, Ahram T, editors. Advances in Intelligent Systems and Computing.
Cham: Springer International Publishing; 2019. p. 286–92.'
conference:
end_date: 2019-02-10
location: San Diego, USA
name: 2nd International Conference on Intelligent Human Systems
start_date: 2019-02-07
date_created: 2019-02-28T14:29:37Z
date_updated: 2023-03-15T13:50:03Z
department:
- _id: DEP7020
- _id: DEP1305
doi: 10.1007/978-3-030-11051-2_44
editor:
- first_name: 'Waldemar '
full_name: 'Karwowski, Waldemar '
last_name: Karwowski
- first_name: Tareq
full_name: Ahram, Tareq
last_name: Ahram
keyword:
- Assistance systems
- Manual assembly
- Cognitive ergonomics
language:
- iso: eng
main_file_link:
- url: https://link.springer.com/chapter/10.1007/978-3-030-11051-2_44
page: 286-292
place: Cham
publication: Advances in Intelligent Systems and Computing
publication_identifier:
eisbn:
- 978-3-030-11051-2
eissn:
- 2194-5365
isbn:
- 978-3-030-11050-5
issn:
- 2194-5357
publication_status: published
publisher: Springer International Publishing
quality_controlled: '1'
status: public
title: How to Design Assembly Assistance Systems
type: conference
user_id: '49010'
year: 2019
...
---
_id: '222'
abstract:
- lang: ger
text: Die Komplexität in der manuellen Montage steigt. In der sog. Mehrprodukt-
oder Variantenmontage hat der Beschäftigte permanent zwischen verschiedenen Alternativen
auszuwählen. Dies betrifft z.B. zu montierende Teile, Werkzeuge, Fügeverfahren
oder Hilfsmittel, die in ganz unterschiedlichen Kombinationen zu verwenden sind.
Der Montageprozess wird dadurch aus Sicht des Beschäftigten zu einem kontinuierlichen
Auswahlprozess. Dieser stellt zunehmend höhere informatorische und kognitive Anforderungen
und steigert die mentale Beanspruchung. Dies hat negative Auswirkungen auf die
Arbeitsproduktivität. Informatorische Assistenzsysteme gelten als geeignete Instrumente,
moderierenden Einfluss auf diese Entwicklung zu nehmen. Entscheidende Stellgrößen
dabei betreffen Fragen, wie komplex die Anforderungen und wie ausgeprägt die subjektiven
Ressourcen sowie die mentalen Beanspruchungen sind. Aus diesen Überlegungen werden
Empfehlungen zur Gestaltung von informatorischen Assistenzsystemen abgeleitet.
- lang: eng
text: "Manual assembly increases in complexity. In the so-called multi-product-
or mixed-model-assembly, the employee has to constantly make choices between different
alternatives. This concerns e. g. parts to be assembled, tools, fixing methods
or materials that can be processed in very different combinations. From the perspective
of a worker the assembly process becomes a continuous choice process, setting
increasingly higher informational and cognitive demands and increasing mental
strain. This has a negative impact on labor productivity. Information Assistance
Systems are considered appropriate tools to take moderating influence on this
development. However, it should be considered how complex demands are as well
as how pronounced subjective resources and mental strain are. Based on these considerations,
recommendations for the design of information assistance systems are derived.\r\n\r\nPractical
Relevance: Manufacturing industry faces the demanding task of producing more and
more product variants even in manual assembly. As a result, assembly workers have
to process more information and are therefore exposed to greater stress. In order
to avoid the resulting loss of labor productivity, assembly systems are increasingly
integrating informational assistance systems that, on the one hand, support cognitive
processing and, on the other hand, reduce stress. Various design recommendations
are given for such informational assistance systems."
author:
- first_name: Manfred
full_name: Bornewasser, Manfred
last_name: Bornewasser
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Dominic
full_name: Bläsing, Dominic
last_name: Bläsing
citation:
ama: 'Bornewasser M, Hinrichsen S, Bläsing D. Informatorische Assistenzsysteme in
der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung?
Zeitschrift für Arbeitswissenschaft. 2018;72(4):264-275. doi:https://doi.org/10.1007/s41449-018-0123-x'
apa: 'Bornewasser, M., Hinrichsen, S., & Bläsing, D. (2018). Informatorische
Assistenzsysteme in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion
mentaler Beanspruchung? Zeitschrift für Arbeitswissenschaft, 72(4),
264–275. https://doi.org/10.1007/s41449-018-0123-x'
bjps: 'Bornewasser M, Hinrichsen S and Bläsing D (2018) Informatorische Assistenzsysteme
in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung?
Zeitschrift für Arbeitswissenschaft 72, 264–275.'
chicago: 'Bornewasser, Manfred, Sven Hinrichsen, and Dominic Bläsing. “Informatorische
Assistenzsysteme in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion
mentaler Beanspruchung?” Zeitschrift für Arbeitswissenschaft 72, no. 4
(2018): 264–75. https://doi.org/10.1007/s41449-018-0123-x.'
chicago-de: 'Bornewasser, Manfred, Sven Hinrichsen und Dominic Bläsing. 2018. Informatorische
Assistenzsysteme in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion
mentaler Beanspruchung? Zeitschrift für Arbeitswissenschaft 72, Nr. 4:
264–275. doi:https://doi.org/10.1007/s41449-018-0123-x,
.'
din1505-2-1: 'Bornewasser, Manfred
; Hinrichsen, Sven ; Bläsing,
Dominic: Informatorische Assistenzsysteme in der manuellen Montage: Ein
nützliches Werkzeug zur Reduktion mentaler Beanspruchung? In: Zeitschrift für
Arbeitswissenschaft Bd. 72. Berlin Heidelberg, Springer (2018), Nr. 4, S. 264–275'
havard: 'M. Bornewasser, S. Hinrichsen, D. Bläsing, Informatorische Assistenzsysteme
in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung?,
Zeitschrift für Arbeitswissenschaft. 72 (2018) 264–275.'
ieee: 'M. Bornewasser, S. Hinrichsen, and D. Bläsing, “Informatorische Assistenzsysteme
in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung?,”
Zeitschrift für Arbeitswissenschaft, vol. 72, no. 4, pp. 264–275, 2018.'
mla: 'Bornewasser, Manfred, et al. “Informatorische Assistenzsysteme in der manuellen
Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung?” Zeitschrift
für Arbeitswissenschaft, vol. 72, no. 4, Springer, 2018, pp. 264–75, doi:https://doi.org/10.1007/s41449-018-0123-x.'
short: M. Bornewasser, S. Hinrichsen, D. Bläsing, Zeitschrift für Arbeitswissenschaft
72 (2018) 264–275.
ufg: 'Bornewasser, Manfred et. al. (2018): Informatorische Assistenzsysteme
in der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung?,
in: Zeitschrift für Arbeitswissenschaft 72 (4), S. 264–275.'
van: 'Bornewasser M, Hinrichsen S, Bläsing D. Informatorische Assistenzsysteme in
der manuellen Montage: Ein nützliches Werkzeug zur Reduktion mentaler Beanspruchung?
Zeitschrift für Arbeitswissenschaft. 2018;72(4):264–75.'
date_created: 2018-11-06T13:25:05Z
date_updated: 2023-03-15T13:49:39Z
department:
- _id: DEP7020
- _id: DEP1305
doi: https://doi.org/10.1007/s41449-018-0123-x
intvolume: ' 72'
issue: '4'
keyword:
- Complexity
- Mental workload
- Objective measurement
- Informational assistance systems
- Cognitive ergonomics
language:
- iso: ger
main_file_link:
- url: https://link.springer.com/article/10.1007%2Fs41449-018-0123-x#Abs2
page: 264-275
place: Berlin Heidelberg
project:
- _id: FBB6D104-44D9-11E9-AA25-B54CDB794CE1
name: Montexas 4.0
publication: Zeitschrift für Arbeitswissenschaft
publication_identifier:
issn:
- 0340-2444
publication_status: published
publisher: Springer
quality_controlled: '1'
related_material:
link:
- relation: contains
url: https://link.springer.com/article/10.1007%2Fs41449-018-0123-x#Abs2
status: public
title: 'Informatorische Assistenzsysteme in der manuellen Montage: Ein nützliches
Werkzeug zur Reduktion mentaler Beanspruchung?'
type: journal_article
user_id: '49010'
volume: 72
year: 2018
...
---
_id: '4321'
abstract:
- lang: eng
text: Recent research has shown that computer-based Assistive Technology (AT) has
the potential to support individuals with disabilities in production environments.
At the same time, step-by-step instructions enable workers to be successful in
their performance of industrial tasks that were formerly difficult to accomplish.
We merged these two types of intervention and developed an application running
on a mobile device that can assist disabled workers working more independently.
In an evaluation study, we investigated how our assistive system affects the task
efficiency as well as participants’ subjective evaluation. Results show advantages
when using the assistive prototype with regard to users’ task efficiency and subjective
evaluations.
author:
- first_name: Volkan
full_name: Aksu, Volkan
last_name: Aksu
- first_name: Sascha
full_name: Jenderny, Sascha
last_name: Jenderny
- first_name: Sascha
full_name: Martinez, Sascha
last_name: Martinez
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Aksu V, Jenderny S, Martinez S, Röcker C. Providing Context-Sensitive Mobile
Assistance for People with Disabilities in the Workplace. In: Di Bucchianico G,
ed. Providing Context-Sensitive Mobile Assistance for People with Disabilities
in the Workplace. Vol 776. Advances in Intelligent Systems and Computing.
Cham: Springer; 2018:3-14. doi:10.1007/978-3-319-94622-1_1'
apa: 'Aksu, V., Jenderny, S., Martinez, S., & Röcker, C. (2018). Providing Context-Sensitive
Mobile Assistance for People with Disabilities in the Workplace. In G. Di Bucchianico
(Ed.), Providing Context-Sensitive Mobile Assistance for People with Disabilities
in the Workplace (Vol. 776, pp. 3–14). Cham: Springer. https://doi.org/10.1007/978-3-319-94622-1_1'
bjps: 'Aksu V et al. (2018) Providing Context-Sensitive Mobile Assistance
for People with Disabilities in the Workplace. In Di Bucchianico G (ed.), Providing
Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace,
vol. 776. Cham: Springer, pp. 3–14.'
chicago: 'Aksu, Volkan, Sascha Jenderny, Sascha Martinez, and Carsten Röcker. “Providing
Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace.”
In Providing Context-Sensitive Mobile Assistance for People with Disabilities
in the Workplace, edited by Giuseppe Di Bucchianico, 776:3–14. Advances in
Intelligent Systems and Computing. Cham: Springer, 2018. https://doi.org/10.1007/978-3-319-94622-1_1.'
chicago-de: 'Aksu, Volkan, Sascha Jenderny, Sascha Martinez und Carsten Röcker.
2018. Providing Context-Sensitive Mobile Assistance for People with Disabilities
in the Workplace. In: Providing Context-Sensitive Mobile Assistance for People
with Disabilities in the Workplace, hg. von Giuseppe Di Bucchianico, 776:3–14.
Advances in Intelligent Systems and Computing. Cham: Springer. doi:10.1007/978-3-319-94622-1_1,
.'
din1505-2-1: 'Aksu, Volkan ; Jenderny, Sascha ; Martinez,
Sascha ; Röcker, Carsten:
Providing Context-Sensitive Mobile Assistance for People with Disabilities in
the Workplace. In: Di Bucchianico, G.
(Hrsg.): Providing Context-Sensitive Mobile Assistance for People with Disabilities
in the Workplace, Advances in Intelligent Systems and Computing. Bd.
776. Cham : Springer, 2018, S. 3–14'
havard: 'V. Aksu, S. Jenderny, S. Martinez, C. Röcker, Providing Context-Sensitive
Mobile Assistance for People with Disabilities in the Workplace, in: G. Di Bucchianico
(Ed.), Providing Context-Sensitive Mobile Assistance for People with Disabilities
in the Workplace, Springer, Cham, 2018: pp. 3–14.'
ieee: V. Aksu, S. Jenderny, S. Martinez, and C. Röcker, “Providing Context-Sensitive
Mobile Assistance for People with Disabilities in the Workplace,” in Providing
Context-Sensitive Mobile Assistance for People with Disabilities in the Workplace,
Orlando, Florida, USA, 2018, vol. 776, pp. 3–14.
mla: Aksu, Volkan, et al. “Providing Context-Sensitive Mobile Assistance for People
with Disabilities in the Workplace.” Providing Context-Sensitive Mobile Assistance
for People with Disabilities in the Workplace, edited by Giuseppe Di Bucchianico,
vol. 776, Springer, 2018, pp. 3–14, doi:10.1007/978-3-319-94622-1_1.
short: 'V. Aksu, S. Jenderny, S. Martinez, C. Röcker, in: G. Di Bucchianico (Ed.),
Providing Context-Sensitive Mobile Assistance for People with Disabilities in
the Workplace, Springer, Cham, 2018, pp. 3–14.'
ufg: 'Aksu, Volkan et. al. (2018): Providing Context-Sensitive Mobile Assistance
for People with Disabilities in the Workplace, in: Giuseppe Di Bucchianico (Hg.):
Providing Context-Sensitive Mobile Assistance for People with Disabilities
in the Workplace (=Advances in Intelligent Systems and Computing 776),
Cham, S. 3–14.'
van: 'Aksu V, Jenderny S, Martinez S, Röcker C. Providing Context-Sensitive Mobile
Assistance for People with Disabilities in the Workplace. In: Di Bucchianico G,
editor. Providing Context-Sensitive Mobile Assistance for People with Disabilities
in the Workplace. Cham: Springer; 2018. p. 3–14. (Advances in Intelligent Systems
and Computing; vol. 776).'
conference:
end_date: 2018-07-25
location: Orlando, Florida, USA
name: 2018 International Conference on Advanced Production Management and Process
Control ; AHFE 2018
start_date: 201-07-21
date_created: 2021-01-08T08:26:22Z
date_updated: 2023-03-15T13:49:52Z
department:
- _id: DEP5023
doi: 10.1007/978-3-319-94622-1_1
editor:
- first_name: 'Giuseppe '
full_name: 'Di Bucchianico, Giuseppe '
last_name: Di Bucchianico
intvolume: ' 776'
keyword:
- Assistive technology
- 'People with disabilities : Human computer interaction : Industry 4.0'
- Inclusion
- Context-sensitive assistance
- Step-by-step instructions
- Production
- Mobile assistance
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 3-14
place: Cham
publication: Providing Context-Sensitive Mobile Assistance for People with Disabilities
in the Workplace
publication_identifier:
eisbn:
- 978-3-319-94622-1
isbn:
- 978-3-319-94621-4
publication_status: published
publisher: Springer
series_title: Advances in Intelligent Systems and Computing
status: public
title: Providing Context-Sensitive Mobile Assistance for People with Disabilities
in the Workplace
type: conference
user_id: '15514'
volume: 776
year: 2018
...
---
_id: '4323'
abstract:
- lang: eng
text: The latest generation of head-mounted displays such as HoloLens pro- vide
mixed reality capabilities that claim to better integrate the real and virtual
worlds. In this paper, we would like the share our experiences in implementing
a user interface for an assembly assistance system using the HoloLens. We carried
out a preliminary evaluation of the applicability of mixed reality using the per-
spective of developers and expert users in an assembly scenario that allows us
to operate and compare two interfaces - a state-of-the-art projector display system
and the HoloLens. We believe our findings may contribute towards a better un-
derstanding of the effects of new display technologies such as the HoloLens in
developing and using assistance systems in other fields as well. Areas that may
be of future research are also highlighted.
author:
- first_name: Hitesh
full_name: Dhiman, Hitesh
id: '71767'
last_name: Dhiman
- first_name: Sascha
full_name: Martinez, Sascha
last_name: Martinez
- first_name: Volker
full_name: Paelke, Volker
last_name: Paelke
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Dhiman H, Martinez S, Paelke V, Röcker C. Head-Mounted Displays in Industrial
AR-Applications: Ready for Prime Time? In: Fui-Hoon Nah F, Sophia Xiao B, eds.
HCI in Business, Government, and Organizations. Vol 10923. Lecture Notes
in Computer Science ; Information Systems and Applications, incl. Internet/Web,
and HCI . Springer; 2018:67-78. doi:10.1007/978-3-319-91716-0_6'
apa: 'Dhiman, H., Martinez, S., Paelke, V., & Röcker, C. (2018). Head-Mounted
Displays in Industrial AR-Applications: Ready for Prime Time? In F. Fui-Hoon Nah
& B. Sophia Xiao (Eds.), HCI in Business, Government, and Organizations
(Vol. 10923, pp. 67–78). Springer. https://doi.org/10.1007/978-3-319-91716-0_6'
bjps: 'Dhiman H et al. (2018) Head-Mounted Displays in Industrial
AR-Applications: Ready for Prime Time? In Fui-Hoon Nah F and Sophia Xiao B (eds),
HCI in Business, Government, and Organizations, vol. 10923. Cham: Springer,
pp. 67–78.'
chicago: 'Dhiman, Hitesh, Sascha Martinez, Volker Paelke, and Carsten Röcker. “Head-Mounted
Displays in Industrial AR-Applications: Ready for Prime Time?” In HCI in Business,
Government, and Organizations, edited by Fiona Fui-Hoon Nah and Bo Sophia
Xiao, 10923:67–78. Lecture Notes in Computer Science ; Information Systems and
Applications, Incl. Internet/Web, and HCI . Cham: Springer, 2018. https://doi.org/10.1007/978-3-319-91716-0_6.'
chicago-de: 'Dhiman, Hitesh, Sascha Martinez, Volker Paelke und Carsten Röcker.
2018. Head-Mounted Displays in Industrial AR-Applications: Ready for Prime Time?
In: HCI in Business, Government, and Organizations, hg. von Fiona Fui-Hoon
Nah und Bo Sophia Xiao, 10923:67–78. Lecture Notes in Computer Science ; Information
Systems and Applications, incl. Internet/Web, and HCI . Cham: Springer. doi:10.1007/978-3-319-91716-0_6,
.'
din1505-2-1: 'Dhiman, Hitesh ; Martinez, Sascha ; Paelke,
Volker ; Röcker, Carsten:
Head-Mounted Displays in Industrial AR-Applications: Ready for Prime Time? In:
Fui-Hoon Nah, F. ; Sophia
Xiao, B. (Hrsg.): HCI in Business, Government, and Organizations,
Lecture Notes in Computer Science ; Information Systems and Applications,
incl. Internet/Web, and HCI . Bd. 10923. Cham : Springer, 2018, S. 67–78'
havard: 'H. Dhiman, S. Martinez, V. Paelke, C. Röcker, Head-Mounted Displays in
Industrial AR-Applications: Ready for Prime Time?, in: F. Fui-Hoon Nah, B. Sophia
Xiao (Eds.), HCI in Business, Government, and Organizations, Springer, Cham, 2018:
pp. 67–78.'
ieee: 'H. Dhiman, S. Martinez, V. Paelke, and C. Röcker, “Head-Mounted Displays
in Industrial AR-Applications: Ready for Prime Time?,” in HCI in Business,
Government, and Organizations, Las Vegas, NV, USA, 2018, vol. 10923, pp. 67–78.
doi: 10.1007/978-3-319-91716-0_6.'
mla: 'Dhiman, Hitesh, et al. “Head-Mounted Displays in Industrial AR-Applications:
Ready for Prime Time?” HCI in Business, Government, and Organizations,
edited by Fiona Fui-Hoon Nah and Bo Sophia Xiao, vol. 10923, Springer, 2018, pp.
67–78, https://doi.org/10.1007/978-3-319-91716-0_6.'
short: 'H. Dhiman, S. Martinez, V. Paelke, C. Röcker, in: F. Fui-Hoon Nah, B. Sophia
Xiao (Eds.), HCI in Business, Government, and Organizations, Springer, Cham, 2018,
pp. 67–78.'
ufg: 'Dhiman, Hitesh u. a.: Head-Mounted Displays in Industrial AR-Applications:
Ready for Prime Time?, in: Fui-Hoon Nah, Fiona/Sophia Xiao, Bo (Hgg.):
HCI in Business, Government, and Organizations, Bd. 10923, Cham 2018 (Lecture
Notes in Computer Science ; Information Systems and Applications, incl. Internet/Web,
and HCI ), S. 67–78.'
van: 'Dhiman H, Martinez S, Paelke V, Röcker C. Head-Mounted Displays in Industrial
AR-Applications: Ready for Prime Time? In: Fui-Hoon Nah F, Sophia Xiao B, editors.
HCI in Business, Government, and Organizations. Cham: Springer; 2018. p. 67–78.
(Lecture Notes in Computer Science ; Information Systems and Applications, incl.
Internet/Web, and HCI ; vol. 10923).'
conference:
end_date: 2018-07-20
location: Las Vegas, NV, USA
name: 5th International Conference, HCIBGO 2018, Held as Part of HCI International
2018
start_date: 2018-07-15
date_created: 2021-01-08T08:26:24Z
date_updated: 2025-04-11T09:02:30Z
department:
- _id: DEP5023
doi: 10.1007/978-3-319-91716-0_6
editor:
- first_name: Fiona
full_name: Fui-Hoon Nah, Fiona
last_name: Fui-Hoon Nah
- first_name: Bo
full_name: Sophia Xiao, Bo
last_name: Sophia Xiao
intvolume: ' 10923'
keyword:
- Human machine interaction
- Assembly assistance system
- Qualitative study
- HoloLens
language:
- iso: eng
page: 67-78
place: Cham
publication: HCI in Business, Government, and Organizations
publication_identifier:
eisbn:
- 978-3-319-91716-0
isbn:
- 978-3-319-91715-3
publication_status: published
publisher: Springer
series_title: 'Lecture Notes in Computer Science ; Information Systems and Applications,
incl. Internet/Web, and HCI '
status: public
title: 'Head-Mounted Displays in Industrial AR-Applications: Ready for Prime Time?'
type: conference
user_id: '83781'
volume: 10923
year: '2018'
...
---
_id: '265'
abstract:
- lang: eng
text: The maintenance of a tool for injection molding or forming is usually accompanied
by its disassembly and assembly. The duration of the assembly activities is often
a large part of the total activity time for the maintenance of the tool. The degree
of performance of the employees in the execution of these disassembly and assembly
activities is often low. In addition, allowances occur (e.g. searching for work
equipment). At the Industrial Engineering Lab of the Ostwestfalen-Lippe University
of Applied Sciences, a prototype of an assistance system was developed to support
the assembly activities in toolmaking. With the help of this system, the operator
is guided step by step through the assembly process. The economic potential of
the system exists in the reduction of training times, the avoidance of assembly
errors and the increase of labor productivity.
author:
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Daniel
full_name: Riediger, Daniel
id: '52263'
last_name: Riediger
- first_name: Alexander
full_name: Unrau, Alexander
id: '64690'
last_name: Unrau
citation:
ama: 'Hinrichsen S, Riediger D, Unrau A. Development of a Projection-Based Assistance
System for Maintaining Injection Molding Tools. In: IEEE/ IEEM, ed. 2017 IEEE
International Conference on Industrial Engineering and Engineering Management
(IEEM). Danvers; 2017:1571-1575. doi:https://doi.org/10.1109/IEEM.2017.8290157'
apa: Hinrichsen, S., Riediger, D., & Unrau, A. (2017). Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools. In IEEE/ IEEM (Ed.),
2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM) (pp. 1571–1575). Danvers. https://doi.org/10.1109/IEEM.2017.8290157
bjps: Hinrichsen S, Riediger D and Unrau A (2017) Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools. In IEEE/ IEEM (ed.),
2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM). Danvers, pp. 1571–1575.
chicago: Hinrichsen, Sven, Daniel Riediger, and Alexander Unrau. “Development of
a Projection-Based Assistance System for Maintaining Injection Molding Tools.”
In 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM), edited by IEEE/ IEEM, 1571–75. Danvers, 2017. https://doi.org/10.1109/IEEM.2017.8290157.
chicago-de: 'Hinrichsen, Sven, Daniel Riediger und Alexander Unrau. 2017. Development
of a Projection-Based Assistance System for Maintaining Injection Molding Tools.
In: 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM), hg. von IEEE/ IEEM, 1571–1575. Danvers. doi:https://doi.org/10.1109/IEEM.2017.8290157,
.'
din1505-2-1: 'Hinrichsen, Sven ; Riediger, Daniel ; Unrau,
Alexander: Development of a Projection-Based Assistance System for Maintaining
Injection Molding Tools. In: IEEE/ IEEM
(Hrsg.): 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM). Danvers, 2017, S. 1571–1575'
havard: 'S. Hinrichsen, D. Riediger, A. Unrau, Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools, in: IEEE/ IEEM (Ed.),
2017 IEEE International Conference on Industrial Engineering and Engineering Management
(IEEM), Danvers, 2017: pp. 1571–1575.'
ieee: S. Hinrichsen, D. Riediger, and A. Unrau, “Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools,” in 2017 IEEE International
Conference on Industrial Engineering and Engineering Management (IEEM), Singapore,
2017, no. 1, pp. 1571–1575.
mla: Hinrichsen, Sven, et al. “Development of a Projection-Based Assistance System
for Maintaining Injection Molding Tools.” 2017 IEEE International Conference
on Industrial Engineering and Engineering Management (IEEM), edited by IEEE/
IEEM, no. 1, 2017, pp. 1571–75, doi:https://doi.org/10.1109/IEEM.2017.8290157.
short: 'S. Hinrichsen, D. Riediger, A. Unrau, in: IEEE/ IEEM (Ed.), 2017 IEEE International
Conference on Industrial Engineering and Engineering Management (IEEM), Danvers,
2017, pp. 1571–1575.'
ufg: 'Hinrichsen, Sven et. al. (2017): Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools, in: IEEE/ IEEM (Hg.):
2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM), Danvers, S. 1571–1575.'
van: 'Hinrichsen S, Riediger D, Unrau A. Development of a Projection-Based Assistance
System for Maintaining Injection Molding Tools. In: IEEE/ IEEM, editor. 2017 IEEE
International Conference on Industrial Engineering and Engineering Management
(IEEM). Danvers; 2017. p. 1571–5.'
conference:
end_date: 2017-12-13
location: Singapore
name: 'IEEE International Conference on Industrial Engineering and Engineering Management '
start_date: 2017-12-10
corporate_editor:
- IEEE/ IEEM
date_created: 2018-11-26T11:59:27Z
date_updated: 2023-03-15T13:49:41Z
ddc:
- '620'
department:
- _id: DEP7020
- _id: DEP1305
doi: https://doi.org/10.1109/IEEM.2017.8290157
issue: '1'
keyword:
- injection moulding
- machine tools
- maintenance engineering
- productivity
- projection-based assistance system
- injection molding tools
- assembly activities
- assembly process
- assembly errors
- tool maintenance
- disassembly activities
- economic potential
- Industrial Engineering Lab
- Ostwestfalen-Lippe University of Applied Sciences
- toolmaking
- Tools
- Injection molding
- Maintenance engineering
- Usability
- Task analysis
- Workstations
- Morphology
- assembly assistance systems
- assistance systems
- maintenance of injection molding tools
- manual assembly
language:
- iso: eng
page: 1571-1575
place: Danvers
publication: 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM)
publication_identifier:
isbn:
- '978-1-5386-0948-4 '
quality_controlled: '1'
status: public
title: Development of a Projection-Based Assistance System for Maintaining Injection
Molding Tools
type: conference
user_id: '74004'
year: 2017
...
---
_id: '4255'
abstract:
- lang: eng
text: Increasingly, production processes are enabled and controlled by Information
Technology (IT), a development being also referred to as “Industry 4.0”. IT thereby
contributes to flexible and adaptive production processes, and in this sense factories
become “smart factories”. In line with this, IT also more and more supports human
workers via various assistance systems. This support aims to both support workers
to better execute their tasks and to reduce the effort and time required when
working. However, due to the large spectrum of assistance systems, it is hard
to acquire an overview and to select an adequate system for a smart factory based
on meaningful criteria. We therefore synthesize a set of comparison criteria into
a consistent framework and demonstrate the application of our framework by classifying
three examples.
author:
- first_name: Michael
full_name: Fellmann, Michael
last_name: Fellmann
- first_name: Sebastian
full_name: Robert, Sebastian
last_name: Robert
- first_name: Sebastian
full_name: Büttner, Sebastian
id: '61868'
last_name: Büttner
- first_name: Henrik
full_name: Mucha, Henrik
id: '64896'
last_name: Mucha
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Fellmann M, Robert S, Büttner S, Mucha H, Röcker C. Towards a Framework for
Assistance Systems to Support Work Processes in Smart Factories. In: Holzinger
A, ed. Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4,
8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy,
August 29 – September 1, 2017, Proceedings. Vol 10410. Lecture Notes in Computer
Science . Cham: Springer; 2017:59-68. doi:10.1007/978-3-319-66808-6_5'
apa: 'Fellmann, M., Robert, S., Büttner, S., Mucha, H., & Röcker, C. (2017).
Towards a Framework for Assistance Systems to Support Work Processes in Smart
Factories. In A. Holzinger (Ed.), Machine Learning and Knowledge Extraction :
First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE
2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings (Vol. 10410,
pp. 59–68). Cham: Springer. https://doi.org/10.1007/978-3-319-66808-6_5'
bjps: 'Fellmann M et al. (2017) Towards a Framework for Assistance
Systems to Support Work Processes in Smart Factories. In Holzinger A (ed.),
Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9
International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29
– September 1, 2017, Proceedings, vol. 10410. Cham: Springer, pp. 59–68.'
chicago: 'Fellmann, Michael, Sebastian Robert, Sebastian Büttner, Henrik Mucha,
and Carsten Röcker. “Towards a Framework for Assistance Systems to Support Work
Processes in Smart Factories.” In Machine Learning and Knowledge Extraction :
First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE
2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, edited by
Andreas Holzinger, 10410:59–68. Lecture Notes in Computer Science . Cham: Springer,
2017. https://doi.org/10.1007/978-3-319-66808-6_5.'
chicago-de: 'Fellmann, Michael, Sebastian Robert, Sebastian Büttner, Henrik Mucha
und Carsten Röcker. 2017. Towards a Framework for Assistance Systems to Support
Work Processes in Smart Factories. In: Machine Learning and Knowledge Extraction :
First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE
2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, hg. von Andreas
Holzinger, 10410:59–68. Lecture Notes in Computer Science . Cham: Springer. doi:10.1007/978-3-319-66808-6_5,
.'
din1505-2-1: 'Fellmann, Michael ;
Robert, Sebastian ; Büttner,
Sebastian ; Mucha, Henrik
; Röcker, Carsten: Towards a Framework
for Assistance Systems to Support Work Processes in Smart Factories. In: Holzinger, A. (Hrsg.): Machine Learning
and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain
Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings,
Lecture Notes in Computer Science . Bd. 10410. Cham : Springer, 2017, S. 59–68'
havard: 'M. Fellmann, S. Robert, S. Büttner, H. Mucha, C. Röcker, Towards a Framework
for Assistance Systems to Support Work Processes in Smart Factories, in: A. Holzinger
(Ed.), Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9,
12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August
29 – September 1, 2017, Proceedings, Springer, Cham, 2017: pp. 59–68.'
ieee: 'M. Fellmann, S. Robert, S. Büttner, H. Mucha, and C. Röcker, “Towards a Framework
for Assistance Systems to Support Work Processes in Smart Factories,” in Machine
Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International
Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1,
2017, Proceedings, Reggio, Italy, 2017, vol. 10410, pp. 59–68.'
mla: 'Fellmann, Michael, et al. “Towards a Framework for Assistance Systems to Support
Work Processes in Smart Factories.” Machine Learning and Knowledge Extraction :
First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE
2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, edited by
Andreas Holzinger, vol. 10410, Springer, 2017, pp. 59–68, doi:10.1007/978-3-319-66808-6_5.'
short: 'M. Fellmann, S. Robert, S. Büttner, H. Mucha, C. Röcker, in: A. Holzinger
(Ed.), Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9,
12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August
29 – September 1, 2017, Proceedings, Springer, Cham, 2017, pp. 59–68.'
ufg: 'Fellmann, Michael et. al. (2017): Towards a Framework for Assistance
Systems to Support Work Processes in Smart Factories, in: Andreas Holzinger (Hg.):
Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9,
12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August
29 – September 1, 2017, Proceedings (=Lecture Notes in Computer Science 10410),
Cham, S. 59–68.'
van: 'Fellmann M, Robert S, Büttner S, Mucha H, Röcker C. Towards a Framework for
Assistance Systems to Support Work Processes in Smart Factories. In: Holzinger
A, editor. Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 84,
89, 129 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August
29 – September 1, 2017, Proceedings. Cham: Springer; 2017. p. 59–68. (Lecture
Notes in Computer Science ; vol. 10410).'
conference:
end_date: 2017-09-01
location: Reggio, Italy
name: International Cross-Domain Conference, CD-MAKE 2017
start_date: 2017-08-29
date_created: 2020-12-10T13:40:05Z
date_updated: 2023-03-15T13:49:51Z
department:
- _id: DEP5023
doi: 10.1007/978-3-319-66808-6_5
editor:
- first_name: Andreas
full_name: Holzinger, Andreas
last_name: Holzinger
intvolume: ' 10410'
keyword:
- Assistance systems
- Smart factory
- Production processes
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 59-68
place: Cham
publication: ' Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4,
8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August
29 – September 1, 2017, Proceedings'
publication_identifier:
eisbn:
- '9783319668086 '
isbn:
- 978-3-319-66807-9
publication_status: published
publisher: Springer
series_title: 'Lecture Notes in Computer Science '
status: public
title: Towards a Framework for Assistance Systems to Support Work Processes in Smart
Factories
type: conference
user_id: '15514'
volume: 10410
year: 2017
...
---
_id: '578'
abstract:
- lang: eng
text: Challenges of companies are presented by an increasing number of product variants
or a growing product complexity in combination with a reduction of lot size. Therefore
the scope of the work in the field of manual assembly will be more complex. This
situation leads to a need of assistance systems. With these systems, the assembly
workers will be qualified to execute their work tasks within the requirements.
This approach set up on a further implementation of an assistance system at a
great device manufacturer. The main focus of this implementation was the technical
and functional design of the assistance system, but a successful implementation
requires also an active handling of the change process. The purpose of this paper
is the presentation of design principles in form of a process model for the implementation
of digital assistance systems. The development of the design principles takes
place in a participative approach. Executives, work councilsand workers develop
the project results together with external project members. Project managers will
be able to manage implementation processes with the results and take all the success
factors into account.
author:
- first_name: Tim
full_name: Kleineberg, Tim
id: '65024'
last_name: Kleineberg
- first_name: Matthias
full_name: Eichelberg, Matthias
id: '60217'
last_name: Eichelberg
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
citation:
ama: 'Kleineberg T, Eichelberg M, Hinrichsen S. Participative Development of an
Implementation Process for Worker Assistance Systems. In: Padoano E, Villmer F-J,
Department of Production Engineering and Management, eds. Production Engineering
and Management. Lemgo; 2017:25-36.'
apa: Kleineberg, T., Eichelberg, M., & Hinrichsen, S. (2017). Participative
Development of an Implementation Process for Worker Assistance Systems. In E.
Padoano, F.-J. Villmer, & Department of Production Engineering and Management
(Eds.), Production Engineering and Management (pp. 25–36). Lemgo.
bjps: Kleineberg T, Eichelberg M and Hinrichsen S (2017) Participative Development
of an Implementation Process for Worker Assistance Systems. In Padoano E, Villmer
F-J and Department of Production Engineering and Management (eds), Production
Engineering and Management. Lemgo, pp. 25–36.
chicago: Kleineberg, Tim, Matthias Eichelberg, and Sven Hinrichsen. “Participative
Development of an Implementation Process for Worker Assistance Systems.” In Production
Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and
Department of Production Engineering and Management, 25–36. Lemgo, 2017.
chicago-de: 'Kleineberg, Tim, Matthias Eichelberg und Sven Hinrichsen. 2017. Participative
Development of an Implementation Process for Worker Assistance Systems. In: Production
Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und
Department of Production Engineering and Management, 25–36. Lemgo.'
din1505-2-1: 'Kleineberg, Tim ; Eichelberg, Matthias ; Hinrichsen,
Sven: Participative Development of an Implementation Process for Worker
Assistance Systems. In: Padoano, E.
; Villmer, F.-J. ; Department
of Production Engineering and Management (Hrsg.): Production Engineering
and Management. Lemgo, 2017, S. 25–36'
havard: 'T. Kleineberg, M. Eichelberg, S. Hinrichsen, Participative Development
of an Implementation Process for Worker Assistance Systems, in: E. Padoano, F.-J.
Villmer, Department of Production Engineering and Management (Eds.), Production
Engineering and Management, Lemgo, 2017: pp. 25–36.'
ieee: T. Kleineberg, M. Eichelberg, and S. Hinrichsen, “Participative Development
of an Implementation Process for Worker Assistance Systems,” in Production
Engineering and Management, Pordenone, Italy, 2017, no. 1, pp. 25–36.
mla: Kleineberg, Tim, et al. “Participative Development of an Implementation Process
for Worker Assistance Systems.” Production Engineering and Management,
edited by Elio Padoano et al., no. 1, 2017, pp. 25–36.
short: 'T. Kleineberg, M. Eichelberg, S. Hinrichsen, in: E. Padoano, F.-J. Villmer,
Department of Production Engineering and Management (Eds.), Production Engineering
and Management, Lemgo, 2017, pp. 25–36.'
ufg: 'Kleineberg, Tim et. al. (2017): Participative Development of an Implementation
Process for Worker Assistance Systems, in: Elio Padoano et. al. (Hgg.): Production
Engineering and Management, Lemgo, S. 25–36.'
van: 'Kleineberg T, Eichelberg M, Hinrichsen S. Participative Development of an
Implementation Process for Worker Assistance Systems. In: Padoano E, Villmer F-J,
Department of Production Engineering and Management, editors. Production Engineering
and Management. Lemgo; 2017. p. 25–36.'
conference:
end_date: 2017-09-29
location: Pordenone, Italy
name: Proceedings 7th International Conference
start_date: 2017-09-28
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-18T11:34:36Z
date_updated: 2023-03-15T13:50:01Z
department:
- _id: DEP1306
- _id: DEP7020
- _id: DEP1305
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
issue: '1'
keyword:
- Assistance systems
- Change management
- Success factors
- Process model
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf
oa: '1'
page: 25-36
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-946856-01-6
publication_status: published
quality_controlled: '1'
status: public
title: Participative Development of an Implementation Process for Worker Assistance
Systems
type: conference
user_id: '49010'
year: 2017
...
---
_id: '584'
abstract:
- lang: eng
text: Due to the continuing trend towards more complexity of products with an increasing
number of variants and smaller lot sizes, the assembly often takes place -despite
relatively high labor costs in Western industrialized nations -manually or partially
automated. An outsourcing or relocation of assembly function abroad is not suitable
in most cases.Therefore, it is increasingly important to reduce process variations
and waste in manual assembly processes. Assistance systems have the potential,
depending on the situation, to assist the worker in his work, to reduce error
rate and to increase productivity. In a first part of the paper an overview will
be given to different types of assembly assistance systems. Then a morphological
chart is developed, which can provide assistance in selecting or comparing assembly
assistance systems. With the help of this chart an assembly assistant system is
presented. Finally a quick look is taken at further research being done in this
area.
author:
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Daniel
full_name: Riediger, Daniel
id: '52263'
last_name: Riediger
- first_name: Alexander
full_name: Unrau, Alexander
id: '64690'
last_name: Unrau
citation:
ama: 'Hinrichsen S, Riediger D, Unrau A. Assistance Systems in Manual Assembly.
In: Villmer FJ, Padoano E, Department of Production Engineering and Management,
Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management.
; 2016:3-14.'
apa: Hinrichsen, S., Riediger, D., & Unrau, A. (2016). Assistance Systems in
Manual Assembly. In F.-J. Villmer, E. Padoano, Department of Production Engineering
and Management, & Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering
and Management (Issue 01, pp. 3–14).
bjps: Hinrichsen S, Riediger D and Unrau A (2016) Assistance Systems in Manual
Assembly. In Villmer F-J et al. (eds), Production Engineering and Management.
Lemgo, pp. 3–14.
chicago: Hinrichsen, Sven, Daniel Riediger, and Alexander Unrau. “Assistance Systems
in Manual Assembly.” In Production Engineering and Management, edited by
Franz-Josef Villmer, Elio Padoano, Department of Production Engineering and Management,
and Hochschule Ostwestfalen-Lippe, 3–14. Lemgo, 2016.
chicago-de: 'Hinrichsen, Sven, Daniel Riediger und Alexander Unrau. 2016. Assistance
Systems in Manual Assembly. In: Production Engineering and Management,
hg. von Franz-Josef Villmer, Elio Padoano, Department of Production Engineering
and Management, und Hochschule Ostwestfalen-Lippe, 3–14. Lemgo.'
din1505-2-1: 'Hinrichsen, Sven ; Riediger, Daniel ; Unrau,
Alexander: Assistance Systems in Manual Assembly. In: Villmer,
F.-J. ; Padoano, E. ; Department of Production Engineering and Management
; Hochschule Ostwestfalen-Lippe
(Hrsg.): Production Engineering and Management. Lemgo, 2016, S. 3–14'
havard: 'S. Hinrichsen, D. Riediger, A. Unrau, Assistance Systems in Manual Assembly,
in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management,
Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management, Lemgo,
2016: pp. 3–14.'
ieee: S. Hinrichsen, D. Riediger, and A. Unrau, “Assistance Systems in Manual Assembly,”
in Production Engineering and Management, Lemgo, 2016, no. 01, pp. 3–14.
mla: Hinrichsen, Sven, et al. “Assistance Systems in Manual Assembly.” Production
Engineering and Management, edited by Franz-Josef Villmer et al., no. 01,
2016, pp. 3–14.
short: 'S. Hinrichsen, D. Riediger, A. Unrau, in: F.-J. Villmer, E. Padoano, Department
of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.),
Production Engineering and Management, Lemgo, 2016, pp. 3–14.'
ufg: 'Hinrichsen, Sven/Riediger, Daniel/Unrau, Alexander: Assistance Systems
in Manual Assembly, in: Villmer, Franz-Josef u. a. (Hgg.): Production Engineering
and Management, Lemgo 2016, S. 3–14.'
van: 'Hinrichsen S, Riediger D, Unrau A. Assistance Systems in Manual Assembly.
In: Villmer FJ, Padoano E, Department of Production Engineering and Management,
Hochschule Ostwestfalen-Lippe, editors. Production Engineering and Management.
Lemgo; 2016. p. 3–14.'
conference:
end_date: 2016-09-30
location: Lemgo
name: Proceedings 6th International Conference
start_date: 2016-09-29
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-18T14:30:50Z
date_updated: 2023-04-14T11:27:48Z
ddc:
- '620'
department:
- _id: DEP7020
- _id: DEP1306
- _id: DEP1305
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
file:
- access_level: open_access
content_type: application/pdf
creator: mqc-p4h
date_created: 2023-04-14T11:26:54Z
date_updated: 2023-04-14T11:26:54Z
file_id: '9700'
file_name: PEM_2016_Hinrichsen Riediger Unrau.pdf
file_size: 462853
relation: main_file
success: 1
file_date_updated: 2023-04-14T11:26:54Z
has_accepted_license: '1'
issue: '01'
keyword:
- Assistance systems
- Manual assembly
- Morphology
language:
- iso: eng
oa: '1'
page: 3-14
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-946856-00-9
publication_status: published
quality_controlled: '1'
status: public
title: Assistance Systems in Manual Assembly
type: conference
user_id: '49010'
year: '2016'
...
---
_id: '2128'
abstract:
- lang: eng
text: We present the concept of a perceptive motor in terms of a cyber-physical
system (CPS). A model application monitoring a knitting process was developed,
where the take-off of the produced fabric is controlled by an electric motor.
The idea is to equip a synchronous motor with a smart camera and appropriate image
processing hard- and software components. Subsequently, the characteristics of
knitted fabric are analysed by machine-learning (ML) methods. Our concept includes
motor-current analysis and image processing. The aim is to implement an assistance
system for the industrial large circular knitting process. An assistance system
will help to shorten the retrofitting process. The concept is based on a low cost
hardware approach for a smart camera, and stems from the recent development of
image processing applications for mobile devices [1–4].
author:
- first_name: Kristijan
full_name: Vukovic, Kristijan
last_name: Vukovic
- first_name: Kristina
full_name: Simonis, Kristina
last_name: Simonis
- first_name: Helene
full_name: Dörksen, Helene
id: '46416'
last_name: Dörksen
- first_name: Volker
full_name: Lohweg, Volker
id: '1804'
last_name: Lohweg
orcid: 0000-0002-3325-7887
citation:
ama: 'Vukovic K, Simonis K, Dörksen H, Lohweg V. Efficient Image Processing System
for an Industrial Machine Learning Task. In: Conference on Machine Learning
for Cyber-Physical Systems (ML4CPS). Fraunhofer Application Centre IOSB-INA,
Lemgo; 2015. doi:10.1007/978-3-662-48838-6_8'
apa: Vukovic, K., Simonis, K., Dörksen, H., & Lohweg, V. (2015). Efficient Image
Processing System for an Industrial Machine Learning Task. In Conference on
Machine Learning for Cyber-Physical Systems (ML4CPS). Fraunhofer Application
Centre IOSB-INA, Lemgo. https://doi.org/10.1007/978-3-662-48838-6_8
bjps: Vukovic K et al. (2015) Efficient Image Processing System for
an Industrial Machine Learning Task. Conference on Machine Learning for Cyber-Physical
Systems (ML4CPS). Fraunhofer Application Centre IOSB-INA, Lemgo.
chicago: Vukovic, Kristijan, Kristina Simonis, Helene Dörksen, and Volker Lohweg.
“Efficient Image Processing System for an Industrial Machine Learning Task.” In
Conference on Machine Learning for Cyber-Physical Systems (ML4CPS). Fraunhofer
Application Centre IOSB-INA, Lemgo, 2015. https://doi.org/10.1007/978-3-662-48838-6_8.
chicago-de: 'Vukovic, Kristijan, Kristina Simonis, Helene Dörksen und Volker Lohweg.
2015. Efficient Image Processing System for an Industrial Machine Learning Task.
In: Conference on Machine Learning for Cyber-Physical Systems (ML4CPS).
Fraunhofer Application Centre IOSB-INA, Lemgo. doi:10.1007/978-3-662-48838-6_8,
.'
din1505-2-1: 'Vukovic, Kristijan ;
Simonis, Kristina ; Dörksen,
Helene ; Lohweg, Volker:
Efficient Image Processing System for an Industrial Machine Learning Task. In:
Conference on Machine Learning for Cyber-Physical Systems (ML4CPS). Fraunhofer
Application Centre IOSB-INA, Lemgo, 2015'
havard: 'K. Vukovic, K. Simonis, H. Dörksen, V. Lohweg, Efficient Image Processing
System for an Industrial Machine Learning Task, in: Conference on Machine Learning
for Cyber-Physical Systems (ML4CPS), Fraunhofer Application Centre IOSB-INA, Lemgo,
2015.'
ieee: K. Vukovic, K. Simonis, H. Dörksen, and V. Lohweg, “Efficient Image Processing
System for an Industrial Machine Learning Task,” in Conference on Machine Learning
for Cyber-Physical Systems (ML4CPS), 2015.
mla: Vukovic, Kristijan, et al. “Efficient Image Processing System for an Industrial
Machine Learning Task.” Conference on Machine Learning for Cyber-Physical Systems
(ML4CPS), 2015, doi:10.1007/978-3-662-48838-6_8.
short: 'K. Vukovic, K. Simonis, H. Dörksen, V. Lohweg, in: Conference on Machine
Learning for Cyber-Physical Systems (ML4CPS), Fraunhofer Application Centre IOSB-INA,
Lemgo, 2015.'
ufg: 'Vukovic, Kristijan et. al. (2015): Efficient Image Processing System
for an Industrial Machine Learning Task, in: Conference on Machine Learning
for Cyber-Physical Systems (ML4CPS), Fraunhofer Application Centre IOSB-INA,
Lemgo.'
van: 'Vukovic K, Simonis K, Dörksen H, Lohweg V. Efficient Image Processing System
for an Industrial Machine Learning Task. In: Conference on Machine Learning for
Cyber-Physical Systems (ML4CPS). Fraunhofer Application Centre IOSB-INA, Lemgo;
2015.'
date_created: 2019-12-04T09:04:50Z
date_updated: 2023-03-15T13:49:38Z
department:
- _id: DEP5023
doi: 10.1007/978-3-662-48838-6_8
keyword:
- Assistance System
- Euler Number
- Synchronous Motor
- Image Processing System
- Image Processing Method
language:
- iso: eng
main_file_link:
- url: https://link.springer.com/chapter/10.1007/978-3-662-48838-6_8
place: Fraunhofer Application Centre IOSB-INA, Lemgo
publication: Conference on Machine Learning for Cyber-Physical Systems (ML4CPS)
status: public
title: Efficient Image Processing System for an Industrial Machine Learning Task
type: conference
user_id: '68554'
year: 2015
...