[{"publication_identifier":{"isbn":["978-963-421-864-7"]},"title":"Regenerative Design and Co-commitment as Decisive Factors in Mass Housing Revitalisation","editor":[{"full_name":"Benko, Melinda","first_name":"Melinda","last_name":"Benko"}],"ddc":["720"],"publication":"Doconf 2021: Facing post-socialist urban heritage - Proceedings","oa":"1","status":"public","conference":{"start_date":"2021-10-08","end_date":"2021-10-09","name":"Doconf 2021: Facing post-socialist urban heritage","location":"Budapest"},"language":[{"iso":"eng"}],"user_id":"83781","file":[{"date_updated":"2022-01-03T10:18:46Z","access_level":"open_access","relation":"main_file","file_name":"doconf2021_proceedings_21nov15_AD.pdf","content_type":"application/pdf","creator":"5bw-b6d","file_size":2575375,"success":1,"file_id":"6933","date_created":"2022-01-03T10:18:46Z"}],"place":"Budapest","citation":{"ufg":"Dragutinovic, Anica/Pottgiesser, Uta: Regenerative Design and Co-commitment as Decisive Factors in Mass Housing Revitalisation, in: Benko, Melinda (Hg.): Doconf 2021: Facing post-socialist urban heritage - Proceedings, Budapest 2021, S. 116–125.","van":"Dragutinovic A, Pottgiesser U. Regenerative Design and Co-commitment as Decisive Factors in Mass Housing Revitalisation. In: Benko M, editor. Doconf 2021: Facing post-socialist urban heritage - Proceedings. Budapest: BME Department of Urban Planning and Design; 2021. p. 116–25.","ieee":"A. Dragutinovic and U. Pottgiesser, “Regenerative Design and Co-commitment as Decisive Factors in Mass Housing Revitalisation,” in Doconf 2021: Facing post-socialist urban heritage - Proceedings, Budapest, 2021, pp. 116–125. doi: https://doi.org/10.25644/srfb-k706.","short":"A. Dragutinovic, U. Pottgiesser, in: M. Benko (Ed.), Doconf 2021: Facing Post-Socialist Urban Heritage - Proceedings, BME Department of Urban Planning and Design, Budapest, 2021, pp. 116–125.","havard":"A. Dragutinovic, U. Pottgiesser, Regenerative Design and Co-commitment as Decisive Factors in Mass Housing Revitalisation, in: M. Benko (Ed.), Doconf 2021: Facing Post-Socialist Urban Heritage - Proceedings, BME Department of Urban Planning and Design, Budapest, 2021: pp. 116–125.","bjps":"Dragutinovic A and Pottgiesser U (2021) Regenerative Design and Co-Commitment as Decisive Factors in Mass Housing Revitalisation. In Benko M (ed.), Doconf 2021: Facing Post-Socialist Urban Heritage - Proceedings. Budapest: BME Department of Urban Planning and Design, pp. 116–125.","din1505-2-1":"Dragutinovic, Anica ; Pottgiesser, Uta: Regenerative Design and Co-commitment as Decisive Factors in Mass Housing Revitalisation. In: Benko, M. (Hrsg.): Doconf 2021: Facing post-socialist urban heritage - Proceedings. Budapest : BME Department of Urban Planning and Design, 2021, S. 116–125","mla":"Dragutinovic, Anica, and Uta Pottgiesser. “Regenerative Design and Co-Commitment as Decisive Factors in Mass Housing Revitalisation.” Doconf 2021: Facing Post-Socialist Urban Heritage - Proceedings, edited by Melinda Benko, BME Department of Urban Planning and Design, 2021, pp. 116–25, https://doi.org/10.25644/srfb-k706.","apa":"Dragutinovic, A., & Pottgiesser, U. (2021). Regenerative Design and Co-commitment as Decisive Factors in Mass Housing Revitalisation. In M. Benko (Ed.), Doconf 2021: Facing post-socialist urban heritage - Proceedings (pp. 116–125). BME Department of Urban Planning and Design. https://doi.org/10.25644/srfb-k706","chicago-de":"Dragutinovic, Anica und Uta Pottgiesser. 2021. Regenerative Design and Co-commitment as Decisive Factors in Mass Housing Revitalisation. In: Doconf 2021: Facing post-socialist urban heritage - Proceedings, hg. von Melinda Benko, 116–125. Budapest: BME Department of Urban Planning and Design. doi:https://doi.org/10.25644/srfb-k706, .","ama":"Dragutinovic A, Pottgiesser U. Regenerative Design and Co-commitment as Decisive Factors in Mass Housing Revitalisation. In: Benko M, ed. Doconf 2021: Facing Post-Socialist Urban Heritage - Proceedings. BME Department of Urban Planning and Design; 2021:116-125. doi:https://doi.org/10.25644/srfb-k706","chicago":"Dragutinovic, Anica, and Uta Pottgiesser. “Regenerative Design and Co-Commitment as Decisive Factors in Mass Housing Revitalisation.” In Doconf 2021: Facing Post-Socialist Urban Heritage - Proceedings, edited by Melinda Benko, 116–25. Budapest: BME Department of Urban Planning and Design, 2021. https://doi.org/10.25644/srfb-k706."},"page":"116-125","publication_status":"published","keyword":["co-commitment","mass housing","revitalisation","common spaces"],"department":[{"_id":"DEP1000"},{"_id":"DEP1055"}],"_id":"6752","year":"2021","has_accepted_license":"1","date_created":"2021-11-16T10:13:48Z","type":"conference","author":[{"id":"68875","orcid":"0000-0002-6962-5223","last_name":"Dragutinovic","first_name":"Anica","full_name":"Dragutinovic, Anica"},{"orcid":"0000-0002-8594-3168","id":"27166","full_name":"Pottgiesser, Uta","first_name":"Uta","last_name":"Pottgiesser"}],"abstract":[{"lang":"eng","text":"The paper introduces a participatory method for re-generation of the common spaces in residential neighbourhoods, especially in case of post-war mass housing. The method combines regenerative design and co-commitment that are recognized as decisive factors in mass housing revitalisation. The spatial focus of the research is on New Belgrade Blocks (Serbia) that are part of the larger phenomenon of the post-socialist urban heritage. The neighbourhoods that are part of this larger framework are having common attributes and facing similar issues nowadays. Comprehending and managing change in these neighbourhoods requires community-driven actions that would include all relevant stakeholders in the process through co-commitment. The actions, that would be based on regenerative and biophilic design, would ensure both maintenance of green spaces of the neighbourhoods, as well as integration of new nature-based solutions. The approach is enhancing the role of community and highlighting the important values of common spaces in ensuring vitality of mass housing and co-creating healthy and liveable environments. The paper is contributing to contemporary discussions on resilient cities and communities and promoting participatory and integrated urban renewal."}],"publisher":"BME Department of Urban Planning and Design","doi":"https://doi.org/10.25644/srfb-k706","file_date_updated":"2022-01-03T10:18:46Z","date_updated":"2024-09-20T08:36:01Z"},{"external_id":{"isi":["000659025000010"]},"publication":"The International Journal of Advanced Manufacturing Technology","publication_identifier":{"eissn":["1433-3015"],"issn":["0268-3768"]},"title":"Cognitive capabilities for the CAAI in cyber-physical production systems","status":"public","isi":"1","language":[{"iso":"eng"}],"user_id":"83781","page":"3513-3532","place":"London [u.a.]","citation":{"chicago-de":"Strohschein, Jan, Andreas Fischbach, Andreas Bunte, Heide Faeskorn-Woyke, Natalia Moriz und Thomas Bartz-Beielstein. 2021. Cognitive capabilities for the CAAI in cyber-physical production systems. The International Journal of Advanced Manufacturing Technology 115, Nr. 11–12: 3513–3532. doi:10.1007/s00170-021-07248-3, .","apa":"Strohschein, J., Fischbach, A., Bunte, A., Faeskorn-Woyke, H., Moriz, N., & Bartz-Beielstein, T. (2021). Cognitive capabilities for the CAAI in cyber-physical production systems. The International Journal of Advanced Manufacturing Technology, 115(11–12), 3513–3532. https://doi.org/10.1007/s00170-021-07248-3","mla":"Strohschein, Jan, et al. “Cognitive Capabilities for the CAAI in Cyber-Physical Production Systems.” The International Journal of Advanced Manufacturing Technology, vol. 115, no. 11–12, 2021, pp. 3513–32, https://doi.org/10.1007/s00170-021-07248-3.","bjps":"Strohschein J et al. (2021) Cognitive Capabilities for the CAAI in Cyber-Physical Production Systems. The International Journal of Advanced Manufacturing Technology 115, 3513–3532.","din1505-2-1":"Strohschein, Jan ; Fischbach, Andreas ; Bunte, Andreas ; Faeskorn-Woyke, Heide ; Moriz, Natalia ; Bartz-Beielstein, Thomas: Cognitive capabilities for the CAAI in cyber-physical production systems. In: The International Journal of Advanced Manufacturing Technology Bd. 115. London [u.a.], Springer (2021), Nr. 11–12, S. 3513–3532","ufg":"Strohschein, Jan u. a.: Cognitive capabilities for the CAAI in cyber-physical production systems, in: The International Journal of Advanced Manufacturing Technology 115 (2021), H. 11–12, S. 3513–3532.","havard":"J. Strohschein, A. Fischbach, A. Bunte, H. Faeskorn-Woyke, N. Moriz, T. Bartz-Beielstein, Cognitive capabilities for the CAAI in cyber-physical production systems, The International Journal of Advanced Manufacturing Technology. 115 (2021) 3513–3532.","short":"J. Strohschein, A. Fischbach, A. Bunte, H. Faeskorn-Woyke, N. Moriz, T. Bartz-Beielstein, The International Journal of Advanced Manufacturing Technology 115 (2021) 3513–3532.","van":"Strohschein J, Fischbach A, Bunte A, Faeskorn-Woyke H, Moriz N, Bartz-Beielstein T. Cognitive capabilities for the CAAI in cyber-physical production systems. The International Journal of Advanced Manufacturing Technology. 2021;115(11–12):3513–32.","ieee":"J. Strohschein, A. Fischbach, A. Bunte, H. Faeskorn-Woyke, N. Moriz, and T. Bartz-Beielstein, “Cognitive capabilities for the CAAI in cyber-physical production systems,” The International Journal of Advanced Manufacturing Technology, vol. 115, no. 11–12, pp. 3513–3532, 2021, doi: 10.1007/s00170-021-07248-3.","chicago":"Strohschein, Jan, Andreas Fischbach, Andreas Bunte, Heide Faeskorn-Woyke, Natalia Moriz, and Thomas Bartz-Beielstein. “Cognitive Capabilities for the CAAI in Cyber-Physical Production Systems.” The International Journal of Advanced Manufacturing Technology 115, no. 11–12 (2021): 3513–32. https://doi.org/10.1007/s00170-021-07248-3.","ama":"Strohschein J, Fischbach A, Bunte A, Faeskorn-Woyke H, Moriz N, Bartz-Beielstein T. Cognitive capabilities for the CAAI in cyber-physical production systems. The International Journal of Advanced Manufacturing Technology. 2021;115(11-12):3513-3532. doi:10.1007/s00170-021-07248-3"},"volume":115,"publication_status":"published","intvolume":" 115","department":[{"_id":"DEP5023"}],"keyword":["Cognition","Industry 40","Big data platform","Machine learning","CPPS","Optimization","Algorithm selection","Simulation"],"year":"2021","_id":"12800","issue":"11-12","date_created":"2025-04-15T13:05:17Z","type":"scientific_journal_article","author":[{"full_name":"Strohschein, Jan","last_name":"Strohschein","first_name":"Jan"},{"full_name":"Fischbach, Andreas","first_name":"Andreas","last_name":"Fischbach"},{"id":"58885","first_name":"Andreas","last_name":"Bunte","full_name":"Bunte, Andreas"},{"first_name":"Heide","last_name":"Faeskorn-Woyke","full_name":"Faeskorn-Woyke, Heide"},{"id":"44238","last_name":"Moriz","first_name":"Natalia","full_name":"Moriz, Natalia"},{"full_name":"Bartz-Beielstein, Thomas","last_name":"Bartz-Beielstein","first_name":"Thomas"}],"publisher":"Springer ","abstract":[{"text":"his paper presents the cognitive module of the Cognitive Architecture for Artificial Intelligence (CAAI) in cyber-physical production systems (CPPS). The goal of this architecture is to reduce the implementation effort of artificial intelligence (AI) algorithms in CPPS. Declarative user goals and the provided algorithm-knowledge base allow the dynamic pipeline orchestration and configuration. A big data platform (BDP) instantiates the pipelines and monitors the CPPS performance for further evaluation through the cognitive module. Thus, the cognitive module is able to select feasible and robust configurations for process pipelines in varying use cases. Furthermore, it automatically adapts the models and algorithms based on model quality and resource consumption. The cognitive module also instantiates additional pipelines to evaluate algorithms from different classes on test functions. CAAI relies on well-defined interfaces to enable the integration of additional modules and reduce implementation effort. Finally, an implementation based on Docker, Kubernetes, and Kafka for the virtualization and orchestration of the individual modules and as messaging technology for module communication is used to evaluate a real-world use case.","lang":"eng"}],"date_updated":"2025-06-26T13:39:22Z","doi":"10.1007/s00170-021-07248-3"},{"conference":{"end_date":"2018-06-21","start_date":"2018-06-17","name":"31st International Conference on Efficiency, Cost, Optimization, Simulation, and Environmental Impact of Energy Systems (ECOS)","location":"Guimaraes, PORTUGAL"},"language":[{"iso":"eng"}],"title":"Hardware-in-the-Loop simulation of an optimized energy management incorporating an experimental biocatalytic methanation reactor","publication_identifier":{"issn":["0360-5442"],"eissn":["1873-6785"]},"publication":"Energy : the international journal","external_id":{"isi":["000476965900009"]},"isi":"1","status":"public","volume":181,"publication_status":"published","user_id":"83781","citation":{"din1505-2-1":"Griese, Martin ; Hoffrath, Marc Philippe ; Broeker, Timo ; Schulte, Thomas ; Schneider, Jan: Hardware-in-the-Loop simulation of an optimized energy management incorporating an experimental biocatalytic methanation reactor. In: Energy : the international journal Bd. 181, Elsevier (2019), S. 77–90","bjps":"Griese M et al. (2019) Hardware-in-the-Loop Simulation of an Optimized Energy Management Incorporating an Experimental Biocatalytic Methanation Reactor. Energy : the international journal 181, 77–90.","van":"Griese M, Hoffrath MP, Broeker T, Schulte T, Schneider J. Hardware-in-the-Loop simulation of an optimized energy management incorporating an experimental biocatalytic methanation reactor. Energy : the international journal. 2019;181:77–90.","ieee":"M. Griese, M. P. Hoffrath, T. Broeker, T. Schulte, and J. Schneider, “Hardware-in-the-Loop simulation of an optimized energy management incorporating an experimental biocatalytic methanation reactor,” Energy : the international journal, vol. 181, pp. 77–90, 2019, doi: 10.1016/j.energy.2019.05.092.","havard":"M. Griese, M.P. Hoffrath, T. Broeker, T. Schulte, J. Schneider, Hardware-in-the-Loop simulation of an optimized energy management incorporating an experimental biocatalytic methanation reactor, Energy : The International Journal. 181 (2019) 77–90.","short":"M. Griese, M.P. Hoffrath, T. Broeker, T. Schulte, J. Schneider, Energy : The International Journal 181 (2019) 77–90.","ufg":"Griese, Martin u. a.: Hardware-in-the-Loop simulation of an optimized energy management incorporating an experimental biocatalytic methanation reactor, in: Energy : the international journal 181 (2019), S. 77–90.","mla":"Griese, Martin, et al. “Hardware-in-the-Loop Simulation of an Optimized Energy Management Incorporating an Experimental Biocatalytic Methanation Reactor.” Energy : The International Journal, vol. 181, 2019, pp. 77–90, https://doi.org/10.1016/j.energy.2019.05.092.","apa":"Griese, M., Hoffrath, M. P., Broeker, T., Schulte, T., & Schneider, J. (2019). Hardware-in-the-Loop simulation of an optimized energy management incorporating an experimental biocatalytic methanation reactor. Energy : The International Journal, 181, 77–90. https://doi.org/10.1016/j.energy.2019.05.092","chicago-de":"Griese, Martin, Marc Philippe Hoffrath, Timo Broeker, Thomas Schulte und Jan Schneider. 2019. Hardware-in-the-Loop simulation of an optimized energy management incorporating an experimental biocatalytic methanation reactor. Energy : the international journal 181: 77–90. doi:10.1016/j.energy.2019.05.092, .","chicago":"Griese, Martin, Marc Philippe Hoffrath, Timo Broeker, Thomas Schulte, and Jan Schneider. “Hardware-in-the-Loop Simulation of an Optimized Energy Management Incorporating an Experimental Biocatalytic Methanation Reactor.” Energy : The International Journal 181 (2019): 77–90. https://doi.org/10.1016/j.energy.2019.05.092.","ama":"Griese M, Hoffrath MP, Broeker T, Schulte T, Schneider J. Hardware-in-the-Loop simulation of an optimized energy management incorporating an experimental biocatalytic methanation reactor. Energy : the international journal. 2019;181:77-90. doi:10.1016/j.energy.2019.05.092"},"page":"77 - 90","_id":"5435","year":"2019","intvolume":" 181","keyword":["Biological methanation","Energy management","HIL simulation","Optimization","Scalable models"],"department":[{"_id":"DEP4023"},{"_id":"DEP4018"}],"quality_controlled":"1","doi":"10.1016/j.energy.2019.05.092","date_updated":"2025-06-25T07:48:53Z","author":[{"full_name":"Griese, Martin","last_name":"Griese","first_name":"Martin","id":"52308"},{"first_name":"Marc Philippe","last_name":"Hoffrath","full_name":"Hoffrath, Marc Philippe"},{"id":"43927","full_name":"Broeker, Timo","first_name":"Timo","last_name":"Broeker"},{"id":"46242","full_name":"Schulte, Thomas","last_name":"Schulte","first_name":"Thomas"},{"full_name":"Schneider, Jan","first_name":"Jan","last_name":"Schneider","id":"13209","orcid":"0000-0001-6401-8873"}],"date_created":"2021-04-08T07:42:48Z","type":"journal_article","abstract":[{"text":"Towards renewable energy systems, the coupling of multiple sectors is important and incorporates novel technologies where currently no models exist that correctly represent all transient effects. Therefore, we present a method that incorporates Hardware-in-the-Loop simulations where virtual components as models are coupled to real and experimental facilities in real time. By including experimental components, a higher validity can be obtained and the practical applicability of renewable energy scenario can be discussed more profoundly. In this paper, the considered energy system consists of an experimental biocatalytic methanation reactor, a real photovoltaic park, a regenerative fuel cell and short-term storage units to supply a residential district. A representative control sequence of the methanator is obtained by modeling the scenario as an optimal control problem. A first HIL simulation highlights that modifications of the instrumentation are required for a grid injection of the generated methane. The scientific approach can be applied to any energy system where some of the considered components are available as experimental or real facilities. Non-exisiting components are simply replaced by models. The presented approach helps to determine which parts or process parameters are crucial for the planed operation before the overall energy system is realized on a larger scale. (C) 2019 Elsevier Ltd. All rights reserved.","lang":"eng"}],"publisher":"Elsevier"},{"year":2018,"_id":"686","issue":"1","department":[{"_id":"DEP7020"},{"_id":"DEP1305"}],"keyword":["SRCPSP","Simulation","Petri Nets","Proposal development"],"date_updated":"2023-03-15T13:50:08Z","author":[{"id":"71470","full_name":"Tackenberg, Sven","first_name":"Sven","last_name":"Tackenberg"},{"last_name":"Duckwitz","first_name":"Sönke","full_name":"Duckwitz, Sönke"},{"id":"71451","full_name":"Gamber, Thilo Gerhard","first_name":"Thilo Gerhard","last_name":"Gamber"}],"type":"conference","date_created":"2019-02-13T16:11:29Z","corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"abstract":[{"lang":"eng","text":"A high level of productivity for current and future services is a critical success factor for companies. When the productivity of services is unknown or incorrect, resources are wasted and opportunities are missed. To respond to this challenge, a simulation modelfor the prospective description of a complex service provision was developed in order to support companies to create a robust offering of services.Focusing on the domain of factory planning, we illustrate howan extended Stochastic Resource-Constrained Project Scheduling Problem(SRCPSP) can be applied for developing proposals. The presented validation study confirms that the approach is capable to calculate and optimize the planning objectives when developing a service for complex engineering projects"}],"conference":{"location":"Lemgo","name":"Proceedings 8th International Conference","end_date":"2018-10-05","start_date":"2018-10-04"},"language":[{"iso":"eng"}],"publication":"Production Engineering and Management","editor":[{"last_name":"Villmer","first_name":"Franz-Josef","full_name":"Villmer, Franz-Josef"},{"full_name":"Padoano, Elio","last_name":"Padoano","first_name":"Elio"}],"title":"Robust Planning of the Provision of complex Services","publication_identifier":{"isbn":["978-3-946856-03-0"]},"status":"public","publication_status":"published","user_id":"74004","page":"271-281","place":"Lemgo","citation":{"din1505-2-1":"Tackenberg, Sven ; Duckwitz, Sönke ; Gamber, Thilo Gerhard: Robust Planning of the Provision of complex Services. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2018, S. 271–281","bjps":"Tackenberg S, Duckwitz S and Gamber TG (2018) Robust Planning of the Provision of Complex Services. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 271–281.","short":"S. Tackenberg, S. Duckwitz, T.G. Gamber, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018, pp. 271–281.","havard":"S. Tackenberg, S. Duckwitz, T.G. Gamber, Robust Planning of the Provision of complex Services, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp. 271–281.","ieee":"S. Tackenberg, S. Duckwitz, and T. G. Gamber, “Robust Planning of the Provision of complex Services,” in Production Engineering and Management, Lemgo, 2018, no. 1, pp. 271–281.","van":"Tackenberg S, Duckwitz S, Gamber TG. Robust Planning of the Provision of complex Services. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2018. p. 271–81.","ufg":"Tackenberg, Sven et. al. (2018): Robust Planning of the Provision of complex Services, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 271–281.","apa":"Tackenberg, S., Duckwitz, S., & Gamber, T. G. (2018). Robust Planning of the Provision of complex Services. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 271–281). Lemgo.","chicago-de":"Tackenberg, Sven, Sönke Duckwitz und Thilo Gerhard Gamber. 2018. Robust Planning of the Provision of complex Services. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 271–281. Lemgo.","mla":"Tackenberg, Sven, et al. “Robust Planning of the Provision of Complex Services.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 271–81.","chicago":"Tackenberg, Sven, Sönke Duckwitz, and Thilo Gerhard Gamber. “Robust Planning of the Provision of Complex Services.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 271–81. Lemgo, 2018.","ama":"Tackenberg S, Duckwitz S, Gamber TG. Robust Planning of the Provision of complex Services. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2018:271-281."}},{"publication_status":"published","date_updated":"2023-03-15T13:50:06Z","main_file_link":[{"open_access":"1","url":"https://refa.de/blog-industrial-engineering/435-projektionsgestuetzte-assistenzsysteme-in-der-manuellen-montage"}],"publisher":"REFA","citation":{"mla":"Unrau, Alexander, et al. Projektionsgestützte Assistenzsysteme in der manuellen Montage. REFA, 2016.","chicago-de":"Unrau, Alexander, Daniel Riediger und Sven Hinrichsen. 2016. Projektionsgestützte Assistenzsysteme in der manuellen Montage. Dortmund: REFA.","apa":"Unrau, A., Riediger, D., & Hinrichsen, S. (2016). Projektionsgestützte Assistenzsysteme in der manuellen Montage. Dortmund: REFA.","van":"Unrau A, Riediger D, Hinrichsen S. Projektionsgestützte Assistenzsysteme in der manuellen Montage. Dortmund: REFA; 2016.","ieee":"A. Unrau, D. Riediger, and S. Hinrichsen, Projektionsgestützte Assistenzsysteme in der manuellen Montage. Dortmund: REFA, 2016.","short":"A. Unrau, D. Riediger, S. Hinrichsen, Projektionsgestützte Assistenzsysteme in der manuellen Montage, REFA, Dortmund, 2016.","havard":"A. Unrau, D. Riediger, S. Hinrichsen, Projektionsgestützte Assistenzsysteme in der manuellen Montage, REFA, Dortmund, 2016.","ufg":"Unrau, Alexander et. al. (2016): Projektionsgestützte Assistenzsysteme in der manuellen Montage, Dortmund.","din1505-2-1":"Unrau, Alexander ; Riediger, Daniel ; Hinrichsen, Sven: Projektionsgestützte Assistenzsysteme in der manuellen Montage. Dortmund : REFA, 2016","bjps":"Unrau A, Riediger D and Hinrichsen S (2016) Projektionsgestützte Assistenzsysteme in der manuellen Montage. Dortmund: REFA.","ama":"Unrau A, Riediger D, Hinrichsen S. Projektionsgestützte Assistenzsysteme in der manuellen Montage. Dortmund: REFA; 2016.","chicago":"Unrau, Alexander, Daniel Riediger, and Sven Hinrichsen. Projektionsgestützte Assistenzsysteme in der manuellen Montage. Dortmund: REFA, 2016."},"abstract":[{"lang":"ger","text":"Die Anforderungen an die Gestaltung von Montagesystemen verändern sich. Dazu tragen kürzer werdende Innovations- und Produktlebenszyklen sowie eine zunehmende Variantenvielfalt bei, mit der eine Montage von kleinen Losen bis hin zur kundenindividuellen Montage einhergeht."}],"place":"Dortmund","date_created":"2019-03-05T16:26:04Z","type":"report","user_id":"49010","author":[{"id":"64690","last_name":"Unrau","first_name":"Alexander","full_name":"Unrau, Alexander"},{"id":"52263","full_name":"Riediger, Daniel","first_name":"Daniel","last_name":"Riediger"},{"id":"49010","full_name":"Hinrichsen, Sven","last_name":"Hinrichsen","first_name":"Sven"}],"language":[{"iso":"ger"}],"year":2016,"_id":"656","status":"public","oa":"1","department":[{"_id":"DEP7020"}],"keyword":["CAD","PPS","Prozessdaten","Simulation"],"title":"Projektionsgestützte Assistenzsysteme in der manuellen Montage"},{"volume":2016,"publication_status":"published","user_id":"83781","page":"269-280","citation":{"ufg":"Scheideler, Eva/Ahlemeyer-Stubbe, Andrea: Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments, in: Villmer, Franz-Josef u. a. (Hgg.): Production engineering and management : proceedings 6th international conference, September 29 and 30, 2016 Lemgo, Germany , Bd. 2016, Lemgo 2016 ( Publication series in direct digital manufacturing ), S. 269–280.","havard":"E. Scheideler, A. Ahlemeyer-Stubbe, Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management : Proceedings 6th International Conference, September 29 and 30, 2016 Lemgo, Germany , Hochschule Ostwestfalen-Lippe, Lemgo, 2016: pp. 269–280.","short":"E. Scheideler, A. Ahlemeyer-Stubbe, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.), Production Engineering and Management : Proceedings 6th International Conference, September 29 and 30, 2016 Lemgo, Germany , Hochschule Ostwestfalen-Lippe, Lemgo, 2016, pp. 269–280.","ieee":"E. Scheideler and A. Ahlemeyer-Stubbe, “Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments,” in Production engineering and management : proceedings 6th international conference, September 29 and 30, 2016 Lemgo, Germany , Lemgo, 2016, vol. 2016, no. 1, pp. 269–280.","van":"Scheideler E, Ahlemeyer-Stubbe A. Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments. In: Villmer FJ, Padoano E, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, editors. Production engineering and management : proceedings 6th international conference, September 29 and 30, 2016 Lemgo, Germany . Lemgo: Hochschule Ostwestfalen-Lippe; 2016. p. 269–80. ( Publication series in direct digital manufacturing ; vol. 2016).","bjps":"Scheideler E and Ahlemeyer-Stubbe A (2016) Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments. In Villmer F-J et al. (eds), Production Engineering and Management : Proceedings 6th International Conference, September 29 and 30, 2016 Lemgo, Germany , vol. 2016. Lemgo: Hochschule Ostwestfalen-Lippe, pp. 269–280.","din1505-2-1":"Scheideler, Eva ; Ahlemeyer-Stubbe, Andrea: Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management ; Hochschule Ostwestfalen-Lippe (Hrsg.): Production engineering and management : proceedings 6th international conference, September 29 and 30, 2016 Lemgo, Germany , Publication series in direct digital manufacturing . Bd. 2016. Lemgo : Hochschule Ostwestfalen-Lippe, 2016, S. 269–280","apa":"Scheideler, E., & Ahlemeyer-Stubbe, A. (2016). Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments. In F.-J. Villmer, E. Padoano, Department of Production Engineering and Management, & Hochschule Ostwestfalen-Lippe (Eds.), Production engineering and management : proceedings 6th international conference, September 29 and 30, 2016 Lemgo, Germany (Vol. 2016, Issue 1, pp. 269–280). Hochschule Ostwestfalen-Lippe.","chicago-de":"Scheideler, Eva und Andrea Ahlemeyer-Stubbe. 2016. Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments. In: Production engineering and management : proceedings 6th international conference, September 29 and 30, 2016 Lemgo, Germany , hg. von Franz-Josef Villmer, Elio Padoano, Department of Production Engineering and Management, und Hochschule Ostwestfalen-Lippe, 2016:269–280. Publication series in direct digital manufacturing . Lemgo: Hochschule Ostwestfalen-Lippe.","mla":"Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments.” Production Engineering and Management : Proceedings 6th International Conference, September 29 and 30, 2016 Lemgo, Germany , edited by Franz-Josef Villmer et al., vol. 2016, no. 1, Hochschule Ostwestfalen-Lippe, 2016, pp. 269–80.","ama":"Scheideler E, Ahlemeyer-Stubbe A. Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments. In: Villmer FJ, Padoano E, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe, eds. Production Engineering and Management : Proceedings 6th International Conference, September 29 and 30, 2016 Lemgo, Germany . Vol 2016. Publication series in direct digital manufacturing . Hochschule Ostwestfalen-Lippe; 2016:269-280.","chicago":"Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments.” In Production Engineering and Management : Proceedings 6th International Conference, September 29 and 30, 2016 Lemgo, Germany , edited by Franz-Josef Villmer, Elio Padoano, Department of Production Engineering and Management, and Hochschule Ostwestfalen-Lippe, 2016:269–80. Publication Series in Direct Digital Manufacturing . Lemgo: Hochschule Ostwestfalen-Lippe, 2016."},"place":"Lemgo","conference":{"name":"6th International Conference on Production Engineering and Management ","end_date":"2016-09-30","start_date":"2016-09-29","location":"Lemgo"},"language":[{"iso":"eng"}],"publication":"Production engineering and management : proceedings 6th international conference, September 29 and 30, 2016 Lemgo, Germany ","publication_identifier":{"unknown":["978-3-946856-00-9"]},"title":"Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments","editor":[{"full_name":"Villmer, Franz-Josef","last_name":"Villmer","first_name":"Franz-Josef"},{"last_name":"Padoano","first_name":"Elio","full_name":"Padoano, Elio"}],"oa":"1","status":"public","main_file_link":[{"url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf","open_access":"1"}],"date_updated":"2024-03-22T13:18:42Z","date_created":"2019-01-29T13:06:45Z","type":"conference","author":[{"full_name":"Scheideler, Eva","first_name":"Eva","last_name":"Scheideler","id":"61522"},{"full_name":"Ahlemeyer-Stubbe, Andrea","last_name":"Ahlemeyer-Stubbe","first_name":"Andrea"}],"publisher":"Hochschule Ostwestfalen-Lippe","abstract":[{"lang":"eng","text":"In the context of Industrie 4.0 respectively direct digital manufacturing, seamless process chains are an important factor. The objective is to shorten the time between quoting for individually designed products and their production and delivery. Therefore, reliable automated and fast evaluation procedures are needed to ensure the quality of the individually designed products in terms of product safety and reliability. This paper aims \r\nto demonstrate how a metamodel, generated on simulated data, adapts to the type of product and delivers the required quality and evaluation procedure. The metamodel guarantees the requested characteristics of the final product without the consultation of human expert knowledge. As proof of concept, a simple, well-documented task from the field of construction has been chosen. The estimation from of the metamodel will meet all safety requirements, is based on the individual input variables and is confirmed without expert interaction. Fast, reliable prediction models deriving from complex simulation models are indispensable conditions for direct digital manufacturing. Using metamodels in automation contexts will be a foundation of manufacturing in future."}],"corporate_editor":["Department of Production Engineering and Management","Hochschule Ostwestfalen-Lippe"],"series_title":"\t Publication series in direct digital manufacturing ","year":"2016","_id":"472","issue":"1","intvolume":" 2016","related_material":{"link":[{"relation":"contains","url":"https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf"}]},"department":[{"_id":"DEP1306"}],"keyword":["Simulation","Metamodel","Computer experiment","Design of experiments"]},{"language":[{"iso":"ger"}],"_id":"421","year":2015,"keyword":["Arbeitszeitgestaltung","Personaleinsatz","Simulation"],"status":"public","ddc":["650"],"title":"Entwicklung eines Verfahrens zur agentenbasierten Einsatzzeitgestaltung","related_material":{"link":[{"relation":"table_of_contents","url":"http://digitale-objekte.hbz-nrw.de/storage2/2015/08/30/file_18/6393849.pdf"}]},"publication_identifier":{"isbn":["978-3-8440-3518-6"]},"publication_status":"published","date_updated":"2023-03-15T13:49:51Z","extern":"1","abstract":[{"lang":"ger","text":"Es wird ein agentenbasiertes Planungsverfahren vorgestellt, das die Vereinbarkeit von Berufs- und Privatleben des Personals besser als bisher gewährleisten soll. Dabei wird durch eine Verbesserung der Einsatzzeitplanung sowohl den individuellen Präferenzen des Personals als auch einer fairen Berücksichtigung der Arbeitszeitwünsche Rechnung getragen. Hinsichtlich der betrieblichen Anforderungen und deren Erfüllung durch die geplanten Einsatzzeiten des Personals erfolgt eine dynamische Bewertung der Arbeitsabläufe mit Hilfe der personalorientierten Simulation.\r\n\r\nDissertation am Institut für Arbeitswissenschaft und Betriebsorganisation (Karlsruhe): Forschungsberichte aus dem Institut für Arbeitswissenschaft und Betriebsorganisation der Universität Karlsruhe ; Bd. 44"}],"citation":{"ama":"Gamber TG. Entwicklung eines Verfahrens zur agentenbasierten Einsatzzeitgestaltung. Aachen: Shaker Verlag; 2015.","chicago":"Gamber, Thilo Gerhard. Entwicklung eines Verfahrens zur agentenbasierten Einsatzzeitgestaltung. Aachen: Shaker Verlag, 2015.","short":"T.G. Gamber, Entwicklung eines Verfahrens zur agentenbasierten Einsatzzeitgestaltung, Shaker Verlag, Aachen, 2015.","havard":"T.G. Gamber, Entwicklung eines Verfahrens zur agentenbasierten Einsatzzeitgestaltung, Shaker Verlag, Aachen, 2015.","van":"Gamber TG. Entwicklung eines Verfahrens zur agentenbasierten Einsatzzeitgestaltung. Aachen: Shaker Verlag; 2015. 289 p.","ieee":"T. G. Gamber, Entwicklung eines Verfahrens zur agentenbasierten Einsatzzeitgestaltung. Aachen: Shaker Verlag, 2015.","ufg":"Gamber, Thilo Gerhard (2015): Entwicklung eines Verfahrens zur agentenbasierten Einsatzzeitgestaltung, Aachen.","din1505-2-1":"Gamber, Thilo Gerhard: Entwicklung eines Verfahrens zur agentenbasierten Einsatzzeitgestaltung. Aachen : Shaker Verlag, 2015","bjps":"Gamber TG (2015) Entwicklung eines Verfahrens zur agentenbasierten Einsatzzeitgestaltung. Aachen: Shaker Verlag.","apa":"Gamber, T. G. (2015). Entwicklung eines Verfahrens zur agentenbasierten Einsatzzeitgestaltung. Aachen: Shaker Verlag.","chicago-de":"Gamber, Thilo Gerhard. 2015. Entwicklung eines Verfahrens zur agentenbasierten Einsatzzeitgestaltung. Aachen: Shaker Verlag.","mla":"Gamber, Thilo Gerhard. Entwicklung eines Verfahrens zur agentenbasierten Einsatzzeitgestaltung. Shaker Verlag, 2015."},"place":"Aachen","publisher":"Shaker Verlag","page":"289","author":[{"last_name":"Gamber","first_name":"Thilo Gerhard","full_name":"Gamber, Thilo Gerhard","id":"71451"}],"date_created":"2019-01-16T14:53:31Z","user_id":"74004","type":"dissertation"},{"extern":"1","date_updated":"2023-03-15T13:49:51Z","date_created":"2019-01-16T15:07:24Z","type":"conference","author":[{"id":"71451","last_name":"Gamber","first_name":"Thilo Gerhard","full_name":"Gamber, Thilo Gerhard"},{"full_name":"Zülch, Gert","last_name":"Zülch","first_name":"Gert"}],"publisher":"Fraunhofer Verlag","corporate_editor":["Fraunhofer-Institut für materialfluss und Logistik IML"],"year":2015,"_id":"422","related_material":{"link":[{"url":"http://digitale-objekte.hbz-nrw.de/storage2/2015/11/07/file_38/6502557.pdf","relation":"table_of_contents"}]},"keyword":["Produktion","Logistik","Simulation"],"publication_status":"published","user_id":"74004","page":"711-720","citation":{"short":"T.G. Gamber, G. Zülch, in: M. Rabe, U. Clausen, Fraunhofer-Institut für materialfluss und Logistik IML (Eds.), Simulation in production and logistics 2015, Fraunhofer Verlag, Stuttgart, 2015, pp. 711–720.","havard":"T.G. Gamber, G. Zülch, Agentenbasierte Planung und simulationsunterstützte Bewertung praferenzorientierter Einsatzzeiten des Personals , in: M. Rabe, U. Clausen, Fraunhofer-Institut für materialfluss und Logistik IML (Eds.), Simulation in production and logistics 2015, Fraunhofer Verlag, Stuttgart, 2015: pp. 711–720.","van":"Gamber TG, Zülch G. Agentenbasierte Planung und simulationsunterstützte Bewertung praferenzorientierter Einsatzzeiten des Personals . In: Rabe M, Clausen U, Fraunhofer-Institut für materialfluss und Logistik IML, editors. Simulation in production and logistics 2015. Stuttgart: Fraunhofer Verlag; 2015. p. 711–20.","ieee":"T. G. Gamber and G. Zülch, “Agentenbasierte Planung und simulationsunterstützte Bewertung praferenzorientierter Einsatzzeiten des Personals ,” in Simulation in production and logistics 2015, Dortmund, 2015, pp. 711–720.","ufg":"Gamber, Thilo Gerhard/Zülch, Gert (2015): Agentenbasierte Planung und simulationsunterstützte Bewertung praferenzorientierter Einsatzzeiten des Personals , in: Markus Rabe et. al. (Hgg.): Simulation in production and logistics 2015, Stuttgart, S. 711–720.","din1505-2-1":"Gamber, Thilo Gerhard ; Zülch, Gert: Agentenbasierte Planung und simulationsunterstützte Bewertung praferenzorientierter Einsatzzeiten des Personals . In: Rabe, M. ; Clausen, U. ; Fraunhofer-Institut für materialfluss und Logistik IML (Hrsg.): Simulation in production and logistics 2015. Stuttgart : Fraunhofer Verlag, 2015, S. 711–720","bjps":"Gamber TG and Zülch G (2015) Agentenbasierte Planung und simulationsunterstützte Bewertung praferenzorientierter Einsatzzeiten des Personals . In Rabe M, Clausen U and Fraunhofer-Institut für materialfluss und Logistik IML (eds), Simulation in production and logistics 2015. Stuttgart: Fraunhofer Verlag, pp. 711–720.","chicago-de":"Gamber, Thilo Gerhard und Gert Zülch. 2015. Agentenbasierte Planung und simulationsunterstützte Bewertung praferenzorientierter Einsatzzeiten des Personals . In: Simulation in production and logistics 2015, hg. von Markus Rabe, Uwe Clausen, und Fraunhofer-Institut für materialfluss und Logistik IML, 711–720. Stuttgart: Fraunhofer Verlag.","apa":"Gamber, T. G., & Zülch, G. (2015). Agentenbasierte Planung und simulationsunterstützte Bewertung praferenzorientierter Einsatzzeiten des Personals . In M. Rabe, U. Clausen, & Fraunhofer-Institut für materialfluss und Logistik IML (Eds.), Simulation in production and logistics 2015 (pp. 711–720). Stuttgart: Fraunhofer Verlag.","mla":"Gamber, Thilo Gerhard, and Gert Zülch. “Agentenbasierte Planung und simulationsunterstützte Bewertung praferenzorientierter Einsatzzeiten des Personals .” Simulation in production and logistics 2015, edited by Markus Rabe et al., Fraunhofer Verlag, 2015, pp. 711–20.","ama":"Gamber TG, Zülch G. Agentenbasierte Planung und simulationsunterstützte Bewertung praferenzorientierter Einsatzzeiten des Personals . In: Rabe M, Clausen U, Fraunhofer-Institut für materialfluss und Logistik IML, eds. Simulation in production and logistics 2015. Stuttgart: Fraunhofer Verlag; 2015:711-720.","chicago":"Gamber, Thilo Gerhard, and Gert Zülch. “Agentenbasierte Planung und simulationsunterstützte Bewertung praferenzorientierter Einsatzzeiten des Personals .” In Simulation in production and logistics 2015, edited by Markus Rabe, Uwe Clausen, and Fraunhofer-Institut für materialfluss und Logistik IML, 711–20. Stuttgart: Fraunhofer Verlag, 2015."},"place":"Stuttgart","conference":{"location":"Dortmund","end_date":"2015-09-25","start_date":"2015-09-23","name":"Proceedings ASIM 2015 Conference \"Simulation in Production and Logistics 2015"},"language":[{"iso":"ger"}],"publication":"Simulation in production and logistics 2015","publication_identifier":{"isbn":["978-3-8396-0936-1"]},"title":"Agentenbasierte Planung und simulationsunterstützte Bewertung praferenzorientierter Einsatzzeiten des Personals ","editor":[{"full_name":"Rabe, Markus","first_name":"Markus","last_name":"Rabe"},{"full_name":"Clausen, Uwe","last_name":"Clausen","first_name":"Uwe"}],"status":"public"},{"language":[{"iso":"eng"}],"conference":{"location":"Porto, Portugal ","end_date":"2012-06","start_date":"2012-06","name":"PerDis 2012: The International Symposium on Pervasive Displays"},"oa":"1","status":"public","editor":[{"full_name":"José, Rui","last_name":"José","first_name":"Rui"}],"title":"Perspective Views in Video Communication Systems: An Analysis of Fundamental User Requirements","publication_identifier":{"isbn":["978-145-031-414-5 "]},"publication":"Proceedings of the 2012 International Symposium on Pervasive Displays","publication_status":"published","place":"New York","citation":{"mla":"Kasugai, Kai, et al. “Perspective Views in Video Communication Systems: An Analysis of Fundamental User Requirements.” Proceedings of the 2012 International Symposium on Pervasive Displays, edited by Rui José, ACM, 2012, pp. 1–6, https://doi.org/10.1145/2307798.2307811.","apa":"Kasugai, K., Heidrich, F., Röcker, C., Russell, P., & Ziefle, M. (2012). Perspective Views in Video Communication Systems: An Analysis of Fundamental User Requirements. In R. José (Ed.), Proceedings of the 2012 International Symposium on Pervasive Displays (pp. 1–6). ACM. https://doi.org/10.1145/2307798.2307811","chicago-de":"Kasugai, Kai, Felix Heidrich, Carsten Röcker, Peter Russell und Martina Ziefle. 2012. Perspective Views in Video Communication Systems: An Analysis of Fundamental User Requirements. In: Proceedings of the 2012 International Symposium on Pervasive Displays, hg. von Rui José, 1–6. New York: ACM. doi:10.1145/2307798.2307811, .","ieee":"K. Kasugai, F. Heidrich, C. Röcker, P. Russell, and M. Ziefle, “Perspective Views in Video Communication Systems: An Analysis of Fundamental User Requirements,” in Proceedings of the 2012 International Symposium on Pervasive Displays, Porto, Portugal , 2012, pp. 1–6. doi: 10.1145/2307798.2307811.","van":"Kasugai K, Heidrich F, Röcker C, Russell P, Ziefle M. Perspective Views in Video Communication Systems: An Analysis of Fundamental User Requirements. In: José R, editor. Proceedings of the 2012 International Symposium on Pervasive Displays. New York: ACM; 2012. p. 1–6.","short":"K. Kasugai, F. Heidrich, C. Röcker, P. Russell, M. Ziefle, in: R. José (Ed.), Proceedings of the 2012 International Symposium on Pervasive Displays, ACM, New York, 2012, pp. 1–6.","havard":"K. Kasugai, F. Heidrich, C. Röcker, P. Russell, M. Ziefle, Perspective Views in Video Communication Systems: An Analysis of Fundamental User Requirements, in: R. José (Ed.), Proceedings of the 2012 International Symposium on Pervasive Displays, ACM, New York, 2012: pp. 1–6.","ufg":"Kasugai, Kai u. a.: Perspective Views in Video Communication Systems: An Analysis of Fundamental User Requirements, in: José, Rui (Hg.): Proceedings of the 2012 International Symposium on Pervasive Displays, New York 2012, S. 1–6.","din1505-2-1":"Kasugai, Kai ; Heidrich, Felix ; Röcker, Carsten ; Russell, Peter ; Ziefle, Martina: Perspective Views in Video Communication Systems: An Analysis of Fundamental User Requirements. In: José, R. (Hrsg.): Proceedings of the 2012 International Symposium on Pervasive Displays. New York : ACM, 2012, S. 1–6","bjps":"Kasugai K et al. (2012) Perspective Views in Video Communication Systems: An Analysis of Fundamental User Requirements. In José R (ed.), Proceedings of the 2012 International Symposium on Pervasive Displays. New York: ACM, pp. 1–6.","ama":"Kasugai K, Heidrich F, Röcker C, Russell P, Ziefle M. Perspective Views in Video Communication Systems: An Analysis of Fundamental User Requirements. In: José R, ed. Proceedings of the 2012 International Symposium on Pervasive Displays. ACM; 2012:1-6. doi:10.1145/2307798.2307811","chicago":"Kasugai, Kai, Felix Heidrich, Carsten Röcker, Peter Russell, and Martina Ziefle. “Perspective Views in Video Communication Systems: An Analysis of Fundamental User Requirements.” In Proceedings of the 2012 International Symposium on Pervasive Displays, edited by Rui José, 1–6. New York: ACM, 2012. https://doi.org/10.1145/2307798.2307811."},"page":"1-6","user_id":"89807","_id":"4395","year":"2012","keyword":["human-computer interaction","mixed-reality","large displays","co-dining","interactive media","family communication","co-presence","architecture"],"department":[{"_id":"DEP5023"},{"_id":"DEP5027"}],"doi":"10.1145/2307798.2307811","date_updated":"2026-07-07T08:40:05Z","main_file_link":[{"open_access":"1"}],"extern":"1","abstract":[{"text":"This paper presents the evaluation of a mixed reality communication system for the home domain, called roomXT. The system uses a wall-sized display that is seamlessly integrated into a living lab, to create a 'life-like' video communication experience. In order to demonstrate the potential of this approach, we conducted a living lab study comparing the developed prototype with a desktop-based system. A special video communication application, which enables spatially separated users to have a joint dinner experience, served as a common basis for the different test conditions. Results of the study show that the overall concept of roomXT was well eceived by users of a wide age range and that the developed prototype system seems to be preferred to commercially available video communication solutions with respect to the tested quality dimensions.","lang":"eng"}],"publisher":"ACM","author":[{"first_name":"Kai","last_name":"Kasugai","full_name":"Kasugai, Kai"},{"first_name":"Felix","last_name":"Heidrich","full_name":"Heidrich, Felix"},{"first_name":"Carsten","last_name":"Röcker","full_name":"Röcker, Carsten","id":"61525"},{"first_name":"Peter","last_name":"Russell","full_name":"Russell, Peter"},{"full_name":"Ziefle, Martina","last_name":"Ziefle","first_name":"Martina"}],"date_created":"2021-01-15T15:20:55Z","type":"conference"},{"corporate_editor":[" American Society of Mechanical Engineers "],"publisher":"American Society of Mechanical Engineers","date_created":"2024-03-17T12:43:27Z","type":"conference_editor_article","author":[{"first_name":"Dominik","last_name":"Düchs","full_name":"Düchs, Dominik"},{"full_name":"Brunklaus, Sabine","last_name":"Brunklaus","first_name":"Sabine"},{"full_name":"Spang, Peter","first_name":"Peter","last_name":"Spang"},{"full_name":"Ritzi-Lehnert, Marion","last_name":"Ritzi-Lehnert","first_name":"Marion"},{"last_name":"Drese","first_name":"Klaus S.","full_name":"Drese, Klaus S."}],"doi":"10.1115/ICNMM2011-58128","date_updated":"2024-06-26T13:53:37Z","keyword":["CFD-Simulation"],"quality_controlled":"1","related_material":{"link":[{"url":"https://asmedigitalcollection.asme.org/ICNMM/proceedings-abstract/ICNMM2011/44649/151/351366?redirectedFrom=PDF","relation":"confirmation"}]},"intvolume":" 2","_id":"11225","series_title":"Proceedings of the ASME 2011","year":"2011","citation":{"bjps":"Düchs D et al. (2011) Numerical Study of Micromixers for Stopped Flow, American Society of Mechanical Engineers (ed.). New York, NY : American Society of Mechanical Engineers.","din1505-2-1":"Düchs, Dominik ; Brunklaus, Sabine ; Spang, Peter ; Ritzi-Lehnert, Marion ; Drese, Klaus S. ; American Society of Mechanical Engineers (Hrsg.): Numerical study of micromixers for stopped flow, Proceedings of the ASME 2011. Bd. 2. New York, NY : American Society of Mechanical Engineers, 2011","ufg":"Düchs, Dominik u. a.: Numerical study of micromixers for stopped flow, Bd. 2, hg. von American Society of Mechanical Engineers , New York, NY 2011 (Proceedings of the ASME 2011).","short":"D. Düchs, S. Brunklaus, P. Spang, M. Ritzi-Lehnert, K.S. Drese, Numerical Study of Micromixers for Stopped Flow, American Society of Mechanical Engineers, New York, NY , 2011.","havard":"D. Düchs, S. Brunklaus, P. Spang, M. Ritzi-Lehnert, K.S. Drese, Numerical study of micromixers for stopped flow, American Society of Mechanical Engineers, New York, NY , 2011.","ieee":"D. Düchs, S. Brunklaus, P. Spang, M. Ritzi-Lehnert, and K. S. Drese, Numerical study of micromixers for stopped flow, vol. 2. New York, NY : American Society of Mechanical Engineers, 2011, pp. 151–153. doi: 10.1115/ICNMM2011-58128.","van":"Düchs D, Brunklaus S, Spang P, Ritzi-Lehnert M, Drese KS. Numerical study of micromixers for stopped flow. American Society of Mechanical Engineers , editor. Proceedings of the ASME 9th International Conference on Nanochannels, Microchannels and Minichannels - 2011 : presented at 9th International Conference on Nanochannels, Microchannels and Minichannels, June 19 - 22, 2011, Edmonton, Canada. New York, NY : American Society of Mechanical Engineers; 2011. (Proceedings of the ASME 2011; vol. 2).","chicago-de":"Düchs, Dominik, Sabine Brunklaus, Peter Spang, Marion Ritzi-Lehnert und Klaus S. Drese. 2011. Numerical study of micromixers for stopped flow. Hg. von American Society of Mechanical Engineers . Proceedings of the ASME 9th International Conference on Nanochannels, Microchannels and Minichannels - 2011 : presented at 9th International Conference on Nanochannels, Microchannels and Minichannels, June 19 - 22, 2011, Edmonton, Canada. Bd. 2. Proceedings of the ASME 2011. New York, NY : American Society of Mechanical Engineers. doi:10.1115/ICNMM2011-58128, .","apa":"Düchs, D., Brunklaus, S., Spang, P., Ritzi-Lehnert, M., & Drese, K. S. (2011). Numerical study of micromixers for stopped flow. In American Society of Mechanical Engineers (Ed.), Proceedings of the ASME 9th International Conference on Nanochannels, Microchannels and Minichannels - 2011 : presented at 9th International Conference on Nanochannels, Microchannels and Minichannels, June 19 - 22, 2011, Edmonton, Canada (Vol. 2, pp. 151–153). American Society of Mechanical Engineers. https://doi.org/10.1115/ICNMM2011-58128","mla":"Düchs, Dominik, et al. “Numerical Study of Micromixers for Stopped Flow.” Proceedings of the ASME 9th International Conference on Nanochannels, Microchannels and Minichannels - 2011 : Presented at 9th International Conference on Nanochannels, Microchannels and Minichannels, June 19 - 22, 2011, Edmonton, Canada, edited by American Society of Mechanical Engineers , vol. 2, American Society of Mechanical Engineers, 2011, pp. 151–53, https://doi.org/10.1115/ICNMM2011-58128.","chicago":"Düchs, Dominik, Sabine Brunklaus, Peter Spang, Marion Ritzi-Lehnert, and Klaus S. Drese. Numerical Study of Micromixers for Stopped Flow. Edited by American Society of Mechanical Engineers . Proceedings of the ASME 9th International Conference on Nanochannels, Microchannels and Minichannels - 2011 : Presented at 9th International Conference on Nanochannels, Microchannels and Minichannels, June 19 - 22, 2011, Edmonton, Canada. Vol. 2. Proceedings of the ASME 2011. New York, NY : American Society of Mechanical Engineers, 2011. https://doi.org/10.1115/ICNMM2011-58128.","ama":"Düchs D, Brunklaus S, Spang P, Ritzi-Lehnert M, Drese KS. Numerical Study of Micromixers for Stopped Flow. Vol 2. ( American Society of Mechanical Engineers , ed.). American Society of Mechanical Engineers; 2011:151-153. doi:10.1115/ICNMM2011-58128"},"place":" New York, NY ","page":"151-153","user_id":"65129","publication_status":"published","volume":2,"status":"public","publication_identifier":{"isbn":[" 978-0-7918-4464-9 "]},"title":"Numerical study of micromixers for stopped flow","publication":"Proceedings of the ASME 9th International Conference on Nanochannels, Microchannels and Minichannels - 2011 : presented at 9th International Conference on Nanochannels, Microchannels and Minichannels, June 19 - 22, 2011, Edmonton, Canada","language":[{"iso":"eng"}],"conference":{"location":"Edmonton, Alberta, Canada ","name":" 9th International Conference on Nanochannels, Microchannels, and Minichannels ","start_date":"2011-06-19","end_date":"2011-06-22"}},{"year":2011,"_id":"5932","department":[{"_id":"DEP1520"}],"keyword":["cost-by-cause principle","freight forwarder","freight rates","network","overhead costs","pricing","simulation","transport"],"date_updated":"2023-03-15T13:50:03Z","doi":"doi.org/10.1007/978-3-642-12494-5_30","publisher":"Springer","abstract":[{"text":"Groupage transports are frequently calculated based on freight rates assuming a declining rate with respect to volume and to transportation distance. This paper investigates the case of feeding many small shipments to customers via a freight forwarder network. It is argued that costs for post-carriage transport dominate other costs. Based on a theoretical estimate, simulation experiments for the case of a uniform distribution of customer locations around the subsidiary with a fixed shipment size per drop suggest that the aggregate costs grow progressively with increasing customer drop distances from the subsidiary. The resulting implications for transport modelling are discussed.","lang":"eng"}],"author":[{"full_name":"Boone, Nicholas","last_name":"Boone","first_name":"Nicholas","id":"24251"},{"id":"24033","full_name":"Quisbrock, Tim","first_name":"Tim","last_name":"Quisbrock"}],"type":"book_chapter","date_created":"2021-05-19T07:26:49Z","language":[{"iso":"eng"}],"conference":{"start_date":"2010-04-21","end_date":"2010-04-22","name":"8th International Heinz Nixdorf Symposium, IHNS 2010","location":"Paderborn"},"status":"public","publication":"Advanced manufacturing and sustainable logistics : proceedings / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn","title":"Modelling post-carriage transport costs in groupage networks","publication_identifier":{"eisbn":["978-3-642-12494-5"],"isbn":["978-3-642-12461-7"]},"publication_status":"published","page":"332-344","citation":{"mla":"Boone, Nicholas, and Tim Quisbrock. “Modelling Post-Carriage Transport Costs in Groupage Networks.” Advanced Manufacturing and Sustainable Logistics : Proceedings / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn, Springer, 2011, pp. 332–44, doi:doi.org/10.1007/978-3-642-12494-5_30.","chicago-de":"Boone, Nicholas und Tim Quisbrock. 2011. Modelling post-carriage transport costs in groupage networks. In: Advanced manufacturing and sustainable logistics : proceedings / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn, 332–344. Berlin: Springer. doi:doi.org/10.1007/978-3-642-12494-5_30, .","apa":"Boone, N., & Quisbrock, T. (2011). Modelling post-carriage transport costs in groupage networks. In Advanced manufacturing and sustainable logistics : proceedings / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn (pp. 332–344). Berlin: Springer. https://doi.org/doi.org/10.1007/978-3-642-12494-5_30","bjps":"Boone N and Quisbrock T (2011) Modelling Post-Carriage Transport Costs in Groupage Networks. Advanced Manufacturing and Sustainable Logistics : Proceedings / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn. Berlin: Springer, pp. 332–344.","din1505-2-1":"Boone, Nicholas ; Quisbrock, Tim: Modelling post-carriage transport costs in groupage networks. In: Advanced manufacturing and sustainable logistics : proceedings / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn. Berlin : Springer, 2011, S. 332–344","ufg":"Boone, Nicholas/Quisbrock, Tim (2011): Modelling post-carriage transport costs in groupage networks, in: Advanced manufacturing and sustainable logistics : proceedings / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn, Berlin, S. 332–344.","van":"Boone N, Quisbrock T. Modelling post-carriage transport costs in groupage networks. In: Advanced manufacturing and sustainable logistics : proceedings / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn. Berlin: Springer; 2011. p. 332–44.","ieee":"N. Boone and T. Quisbrock, “Modelling post-carriage transport costs in groupage networks,” in Advanced manufacturing and sustainable logistics : proceedings / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn, Berlin: Springer, 2011, pp. 332–344.","havard":"N. Boone, T. Quisbrock, Modelling post-carriage transport costs in groupage networks, in: Advanced Manufacturing and Sustainable Logistics : Proceedings / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn, Springer, Berlin, 2011: pp. 332–344.","short":"N. Boone, T. Quisbrock, in: Advanced Manufacturing and Sustainable Logistics : Proceedings / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn, Springer, Berlin, 2011, pp. 332–344.","chicago":"Boone, Nicholas, and Tim Quisbrock. “Modelling Post-Carriage Transport Costs in Groupage Networks.” In Advanced Manufacturing and Sustainable Logistics : Proceedings / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn, 332–44. Berlin: Springer, 2011. https://doi.org/doi.org/10.1007/978-3-642-12494-5_30.","ama":"Boone N, Quisbrock T. Modelling post-carriage transport costs in groupage networks. In: Advanced Manufacturing and Sustainable Logistics : Proceedings / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn. Berlin: Springer; 2011:332-344. doi:doi.org/10.1007/978-3-642-12494-5_30"},"place":"Berlin","user_id":"15514"},{"issue":"1","_id":"617","year":2010,"keyword":["Simulation","Automobilindustrie","Digitale Fabrik","Logistiksysteme","Bauindustrie"],"doi":" DOI: 10.5445/KSP/1000019635 ","main_file_link":[{"url":"https://publikationen.bibliothek.kit.edu/1000019635","open_access":"1"}],"date_updated":"2023-03-15T13:50:04Z","extern":"1","abstract":[{"text":"The production of high quality, customer-oriented but equally competitive products should encourage the manufacturers of construction materials to ensure that the non value-adding activities are continuously reduced within production. Against\r\nthis background, an approach was developed, based on a combination of static value stream mapping and dynamic simulation. By means of a pilot study from a company of the construction materials industry, the developed approach is presented.","lang":"eng"}],"corporate_editor":["Institut für Arbeitswissenschaft und Betriebsorganisation (IFAB)"],"publisher":"KIT","author":[{"full_name":"Börkircher, Mikko","last_name":"Börkircher","first_name":"Mikko"},{"full_name":"Gamber, Thilo Gerhard","last_name":"Gamber","first_name":"Thilo Gerhard","id":"71451"}],"type":"conference","date_created":"2019-03-04T12:48:22Z","language":[{"iso":"ger"}],"conference":{"name":"Integrationsaspekte der Simulation: Technik, Orgnisation und Personal","end_date":"2010-10-08","start_date":"2010-10-07","location":"Karlsruhe"},"oa":"1","status":"public","editor":[{"last_name":"Zülch","first_name":"G.","full_name":"Zülch, G."}],"publication_identifier":{"isbn":["978-3-86644-558-1"]},"title":"Simulationsunterstütztes Wertstromdesign: Ansatz zur Steigerung des Wertschöpfungspotenzials in der Baustoffindustrie","publication":"Integrationsaspekte der Simulation: Technik, Orgnisation und Personal, Karlsruhe, 7. und 8. Oktober 2010 = Integration Aspects of Simulation: Equipment, Organization and Personnell, Karlsruhe, 7th and 8th October 2010.","publication_status":"published","citation":{"ieee":"M. Börkircher and T. G. Gamber, “Simulationsunterstütztes Wertstromdesign: Ansatz zur Steigerung des Wertschöpfungspotenzials in der Baustoffindustrie,” in Integrationsaspekte der Simulation: Technik, Orgnisation und Personal, Karlsruhe, 7. und 8. Oktober 2010 = Integration Aspects of Simulation: Equipment, Organization and Personnell, Karlsruhe, 7th and 8th October 2010., Karlsruhe, 2010, no. 1, pp. 405–412.","van":"Börkircher M, Gamber TG. Simulationsunterstütztes Wertstromdesign: Ansatz zur Steigerung des Wertschöpfungspotenzials in der Baustoffindustrie. In: Zülch G, Institut für Arbeitswissenschaft und Betriebsorganisation (IFAB), editors. Integrationsaspekte der Simulation: Technik, Orgnisation und Personal, Karlsruhe, 7 und 8 Oktober 2010 = Integration Aspects of Simulation: Equipment, Organization and Personnell, Karlsruhe, 7th and 8th October 2010. Karlsruhe: KIT; 2010. p. 405–12.","short":"M. Börkircher, T.G. Gamber, in: G. Zülch, Institut für Arbeitswissenschaft und Betriebsorganisation (IFAB) (Eds.), Integrationsaspekte der Simulation: Technik, Orgnisation und Personal, Karlsruhe, 7. und 8. Oktober 2010 = Integration Aspects of Simulation: Equipment, Organization and Personnell, Karlsruhe, 7th and 8th October 2010., KIT, Karlsruhe, 2010, pp. 405–412.","havard":"M. Börkircher, T.G. Gamber, Simulationsunterstütztes Wertstromdesign: Ansatz zur Steigerung des Wertschöpfungspotenzials in der Baustoffindustrie, in: G. Zülch, Institut für Arbeitswissenschaft und Betriebsorganisation (IFAB) (Eds.), Integrationsaspekte der Simulation: Technik, Orgnisation und Personal, Karlsruhe, 7. und 8. Oktober 2010 = Integration Aspects of Simulation: Equipment, Organization and Personnell, Karlsruhe, 7th and 8th October 2010., KIT, Karlsruhe, 2010: pp. 405–412.","ufg":"Börkircher, Mikko/Gamber, Thilo Gerhard (2010): Simulationsunterstütztes Wertstromdesign: Ansatz zur Steigerung des Wertschöpfungspotenzials in der Baustoffindustrie, in: G. Zülch/Institut für Arbeitswissenschaft und Betriebsorganisation (IFAB) (Hgg.): Integrationsaspekte der Simulation: Technik, Orgnisation und Personal, Karlsruhe, 7. und 8. Oktober 2010 = Integration Aspects of Simulation: Equipment, Organization and Personnell, Karlsruhe, 7th and 8th October 2010., Karlsruhe, S. 405–412.","din1505-2-1":"Börkircher, Mikko ; Gamber, Thilo Gerhard: Simulationsunterstütztes Wertstromdesign: Ansatz zur Steigerung des Wertschöpfungspotenzials in der Baustoffindustrie. In: Zülch, G. ; Institut für Arbeitswissenschaft und Betriebsorganisation (IFAB) (Hrsg.): Integrationsaspekte der Simulation: Technik, Orgnisation und Personal, Karlsruhe, 7. und 8. Oktober 2010 = Integration Aspects of Simulation: Equipment, Organization and Personnell, Karlsruhe, 7th and 8th October 2010.. Karlsruhe : KIT, 2010, S. 405–412","bjps":"Börkircher M and Gamber TG (2010) Simulationsunterstütztes Wertstromdesign: Ansatz zur Steigerung des Wertschöpfungspotenzials in der Baustoffindustrie. In Zülch G and Institut für Arbeitswissenschaft und Betriebsorganisation (IFAB) (eds), Integrationsaspekte der Simulation: Technik, Orgnisation und Personal, Karlsruhe, 7. und 8. Oktober 2010 = Integration Aspects of Simulation: Equipment, Organization and Personnell, Karlsruhe, 7th and 8th October 2010. Karlsruhe: KIT, pp. 405–412.","mla":"Börkircher, Mikko, and Thilo Gerhard Gamber. “Simulationsunterstütztes Wertstromdesign: Ansatz zur Steigerung des Wertschöpfungspotenzials in der Baustoffindustrie.” Integrationsaspekte der Simulation: Technik, Orgnisation und Personal, Karlsruhe, 7. und 8. Oktober 2010 = Integration Aspects of Simulation: Equipment, Organization and Personnell, Karlsruhe, 7th and 8th October 2010., edited by G. Zülch and Institut für Arbeitswissenschaft und Betriebsorganisation (IFAB), no. 1, KIT, 2010, pp. 405–12, doi: DOI: 10.5445/KSP/1000019635 .","apa":"Börkircher, M., & Gamber, T. G. (2010). Simulationsunterstütztes Wertstromdesign: Ansatz zur Steigerung des Wertschöpfungspotenzials in der Baustoffindustrie. In G. Zülch & Institut für Arbeitswissenschaft und Betriebsorganisation (IFAB) (Eds.), Integrationsaspekte der Simulation: Technik, Orgnisation und Personal, Karlsruhe, 7. und 8. Oktober 2010 = Integration Aspects of Simulation: Equipment, Organization and Personnell, Karlsruhe, 7th and 8th October 2010. (pp. 405–412). Karlsruhe: KIT. https://doi.org/ DOI: 10.5445/KSP/1000019635 ","chicago-de":"Börkircher, Mikko und Thilo Gerhard Gamber. 2010. Simulationsunterstütztes Wertstromdesign: Ansatz zur Steigerung des Wertschöpfungspotenzials in der Baustoffindustrie. In: Integrationsaspekte der Simulation: Technik, Orgnisation und Personal, Karlsruhe, 7. und 8. Oktober 2010 = Integration Aspects of Simulation: Equipment, Organization and Personnell, Karlsruhe, 7th and 8th October 2010., hg. von G. Zülch und Institut für Arbeitswissenschaft und Betriebsorganisation (IFAB), 405–412. Karlsruhe: KIT. doi: DOI: 10.5445/KSP/1000019635 , .","ama":"Börkircher M, Gamber TG. Simulationsunterstütztes Wertstromdesign: Ansatz zur Steigerung des Wertschöpfungspotenzials in der Baustoffindustrie. In: Zülch G, Institut für Arbeitswissenschaft und Betriebsorganisation (IFAB), eds. Integrationsaspekte der Simulation: Technik, Orgnisation und Personal, Karlsruhe, 7. und 8. Oktober 2010 = Integration Aspects of Simulation: Equipment, Organization and Personnell, Karlsruhe, 7th and 8th October 2010. Karlsruhe: KIT; 2010:405-412. doi: DOI: 10.5445/KSP/1000019635 ","chicago":"Börkircher, Mikko, and Thilo Gerhard Gamber. “Simulationsunterstütztes Wertstromdesign: Ansatz zur Steigerung des Wertschöpfungspotenzials in der Baustoffindustrie.” In Integrationsaspekte der Simulation: Technik, Orgnisation und Personal, Karlsruhe, 7. und 8. Oktober 2010 = Integration Aspects of Simulation: Equipment, Organization and Personnell, Karlsruhe, 7th and 8th October 2010., edited by G. Zülch and Institut für Arbeitswissenschaft und Betriebsorganisation (IFAB), 405–12. Karlsruhe: KIT, 2010. https://doi.org/ DOI: 10.5445/KSP/1000019635 ."},"place":"Karlsruhe","page":"405-412","user_id":"74004"},{"date_created":"2021-01-21T09:21:26Z","type":"conference","author":[{"full_name":"Kasugai, Kai","last_name":"Kasugai","first_name":"Kai"},{"first_name":"Martina","last_name":"Ziefle","full_name":"Ziefle, Martina"},{"id":"61525","last_name":"Röcker","first_name":"Carsten","full_name":"Röcker, Carsten"},{"last_name":"Russell","first_name":"Peter","full_name":"Russell, Peter"}],"abstract":[{"lang":"eng","text":"This paper gives an overview of how the role of architecture, design, and HCI is to be redefined in a world of ubiquitous computing and the recent advances in display technology. It describes the future care lab and our take on research in this field. We elaborate on how wall-sized displays can form an integral part of an ambient intelligence space that aims to assist the elderly and empower them to stay longer in their familiar surroundings before moving into nursing homes. We propose a classification of different concepts that virtually extend a real environment and describe some possible scenarios."}],"extern":"1","main_file_link":[{"open_access":"1"}],"date_updated":"2026-07-07T07:15:26Z","doi":"10.14236/ewic/CREATE2010.8","department":[{"_id":"DEP5023"},{"_id":"DEP5027"}],"keyword":["mixed reality","immersive co-location","ambient assisted living","architecture","smart spaces","spatial extension"],"year":"2010","_id":"4494","user_id":"89807","page":"40-45","citation":{"chicago":"Kasugai, Kai, Martina Ziefle, Carsten Röcker, and Peter Russell. “Creating Spatio-Temporal Contiguities Between Real and Virtual Rooms in an Assistive Living Environment.” In Proceedings of Create’10 - Innovative Interactions, edited by J. Bonner, M. O’Neill, and O. Mival, 40–45, 2010. https://doi.org/10.14236/ewic/CREATE2010.8.","ama":"Kasugai K, Ziefle M, Röcker C, Russell P. Creating Spatio-Temporal Contiguities Between Real and Virtual Rooms in an Assistive Living Environment. In: Bonner, J, O’Neill M, Mival O, eds. Proceedings of Create’10 - Innovative Interactions. ; 2010:40-45. doi:10.14236/ewic/CREATE2010.8","bjps":"Kasugai K et al. (2010) Creating Spatio-Temporal Contiguities Between Real and Virtual Rooms in an Assistive Living Environment. In Bonner, J, O’Neill M and Mival O (eds), Proceedings of Create’10 - Innovative Interactions. pp. 40–45.","din1505-2-1":"Kasugai, Kai ; Ziefle, Martina ; Röcker, Carsten ; Russell, Peter: Creating Spatio-Temporal Contiguities Between Real and Virtual Rooms in an Assistive Living Environment. In: Bonner, J. ; O’Neill, M. ; Mival, O. (Hrsg.): Proceedings of Create’10 - Innovative Interactions, 2010, S. 40–45","ufg":"Kasugai, Kai u. a.: Creating Spatio-Temporal Contiguities Between Real and Virtual Rooms in an Assistive Living Environment, in: Bonner, J./O’Neill, M./Mival, O. (Hgg.): Proceedings of Create’10 - Innovative Interactions, o. O. 2010, S. 40–45.","short":"K. Kasugai, M. Ziefle, C. Röcker, P. Russell, in: J. Bonner, M. O’Neill, O. Mival (Eds.), Proceedings of Create’10 - Innovative Interactions, 2010, pp. 40–45.","havard":"K. Kasugai, M. Ziefle, C. Röcker, P. Russell, Creating Spatio-Temporal Contiguities Between Real and Virtual Rooms in an Assistive Living Environment, in: J. Bonner, M. O’Neill, O. Mival (Eds.), Proceedings of Create’10 - Innovative Interactions, 2010: pp. 40–45.","van":"Kasugai K, Ziefle M, Röcker C, Russell P. Creating Spatio-Temporal Contiguities Between Real and Virtual Rooms in an Assistive Living Environment. In: Bonner, J, O’Neill M, Mival O, editors. Proceedings of Create’10 - Innovative Interactions. 2010. p. 40–5.","ieee":"K. Kasugai, M. Ziefle, C. Röcker, and P. Russell, “Creating Spatio-Temporal Contiguities Between Real and Virtual Rooms in an Assistive Living Environment,” in Proceedings of Create’10 - Innovative Interactions, Loughborough, UK, 2010, pp. 40–45. doi: 10.14236/ewic/CREATE2010.8.","chicago-de":"Kasugai, Kai, Martina Ziefle, Carsten Röcker und Peter Russell. 2010. Creating Spatio-Temporal Contiguities Between Real and Virtual Rooms in an Assistive Living Environment. In: Proceedings of Create’10 - Innovative Interactions, hg. von J. Bonner, M. O’Neill, und O. Mival, 40–45. doi:10.14236/ewic/CREATE2010.8, .","apa":"Kasugai, K., Ziefle, M., Röcker, C., & Russell, P. (2010). Creating Spatio-Temporal Contiguities Between Real and Virtual Rooms in an Assistive Living Environment. In J. Bonner, M. O’Neill, & O. Mival (Eds.), Proceedings of Create’10 - Innovative Interactions (pp. 40–45). https://doi.org/10.14236/ewic/CREATE2010.8","mla":"Kasugai, Kai, et al. “Creating Spatio-Temporal Contiguities Between Real and Virtual Rooms in an Assistive Living Environment.” Proceedings of Create’10 - Innovative Interactions, edited by J. Bonner, et al., 2010, pp. 40–45, https://doi.org/10.14236/ewic/CREATE2010.8."},"publication_status":"published","publication":"Proceedings of Create’10 - Innovative Interactions","publication_identifier":{"eisbn":["978-0-9554-2254-6"]},"title":"Creating Spatio-Temporal Contiguities Between Real and Virtual Rooms in an Assistive Living Environment","editor":[{"last_name":"Bonner,","first_name":"J.","full_name":"Bonner,, J."},{"last_name":"O’Neill","first_name":"M.","full_name":"O’Neill, M."},{"first_name":"O.","last_name":"Mival","full_name":"Mival, O."}],"oa":"1","status":"public","conference":{"location":"Loughborough, UK","end_date":"2010-07-02","start_date":"2010-06-30","name":"Proceedings of Create’10 "},"language":[{"iso":"eng"}]},{"_id":"486","conference":{"start_date":"2007-09-17","end_date":"2007-09-19","name":"International IFIP TC 5, WG 5.7 Conference on Advances in Production Management Systems (APMS 2007)","location":"Linköping"},"year":2007,"language":[{"iso":"eng"}],"publication_identifier":{"isbn":["978-0-387-74157-4"]},"title":"Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area","editor":[{"full_name":"Olhager, Jan","first_name":"Jan","last_name":"Olhager"},{"full_name":"Persson, Fredrik","first_name":"Fredrik","last_name":"Persson"}],"publication":"Advances in Production Management Systems","keyword":["production planning and control","decision-making system","personnel-oriented simulation"],"status":"public","extern":"1","date_updated":"2023-03-15T13:49:56Z","publication_status":"published","type":"conference","date_created":"2019-01-30T07:51:48Z","user_id":"74004","author":[{"full_name":"Zülch, Gert","first_name":"Gert","last_name":"Zülch"},{"id":"71451","last_name":"Gamber","first_name":"Thilo Gerhard","full_name":"Gamber, Thilo Gerhard"},{"full_name":"Stock, Patricia","last_name":"Stock","first_name":"Patricia"}],"abstract":[{"text":"Growing market demands on enterprises and the resulting challenges for their organization have been discussed for many years now. The flexibilty and mutability of an enterprise are thereby considered as a significant factor for success.","lang":"eng"}],"place":"New York","citation":{"ama":"Zülch G, Gamber TG, Stock P. Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area. In: Olhager J, Persson F, eds. Advances in Production Management Systems. New York: Springer; 2007:337-344.","chicago":"Zülch, Gert, Thilo Gerhard Gamber, and Patricia Stock. “Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area.” In Advances in Production Management Systems, edited by Jan Olhager and Fredrik Persson, 337–44. New York: Springer, 2007.","short":"G. Zülch, T.G. Gamber, P. Stock, in: J. Olhager, F. Persson (Eds.), Advances in Production Management Systems, Springer, New York, 2007, pp. 337–344.","havard":"G. Zülch, T.G. Gamber, P. Stock, Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area, in: J. Olhager, F. Persson (Eds.), Advances in Production Management Systems, Springer, New York, 2007: pp. 337–344.","van":"Zülch G, Gamber TG, Stock P. Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area. In: Olhager J, Persson F, editors. Advances in Production Management Systems. New York: Springer; 2007. p. 337–44.","ieee":"G. Zülch, T. G. Gamber, and P. Stock, “Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area,” in Advances in Production Management Systems, Linköping, 2007, pp. 337–344.","ufg":"Zülch, Gert et. al. (2007): Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area, in: Jan Olhager/Fredrik Persson (Hgg.): Advances in Production Management Systems, New York, S. 337–344.","din1505-2-1":"Zülch, Gert ; Gamber, Thilo Gerhard ; Stock, Patricia: Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area. In: Olhager, J. ; Persson, F. (Hrsg.): Advances in Production Management Systems. New York : Springer, 2007, S. 337–344","bjps":"Zülch G, Gamber TG and Stock P (2007) Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area. In Olhager J and Persson F (eds), Advances in Production Management Systems. New York: Springer, pp. 337–344.","chicago-de":"Zülch, Gert, Thilo Gerhard Gamber und Patricia Stock. 2007. Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area. In: Advances in Production Management Systems, hg. von Jan Olhager und Fredrik Persson, 337–344. New York: Springer.","apa":"Zülch, G., Gamber, T. G., & Stock, P. (2007). Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area. In J. Olhager & F. Persson (Eds.), Advances in Production Management Systems (pp. 337–344). New York: Springer.","mla":"Zülch, Gert, et al. “Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area.” Advances in Production Management Systems, edited by Jan Olhager and Fredrik Persson, Springer, 2007, pp. 337–44."},"page":"337-344","publisher":"Springer"}]