---
_id: '5435'
abstract:
- lang: eng
text: Towards renewable energy systems, the coupling of multiple sectors is important
and incorporates novel technologies where currently no models exist that correctly
represent all transient effects. Therefore, we present a method that incorporates
Hardware-in-the-Loop simulations where virtual components as models are coupled
to real and experimental facilities in real time. By including experimental components,
a higher validity can be obtained and the practical applicability of renewable
energy scenario can be discussed more profoundly. In this paper, the considered
energy system consists of an experimental biocatalytic methanation reactor, a
real photovoltaic park, a regenerative fuel cell and short-term storage units
to supply a residential district. A representative control sequence of the methanator
is obtained by modeling the scenario as an optimal control problem. A first HIL
simulation highlights that modifications of the instrumentation are required for
a grid injection of the generated methane. The scientific approach can be applied
to any energy system where some of the considered components are available as
experimental or real facilities. Non-exisiting components are simply replaced
by models. The presented approach helps to determine which parts or process parameters
are crucial for the planed operation before the overall energy system is realized
on a larger scale. (C) 2019 Elsevier Ltd. All rights reserved.
author:
- first_name: Martin
full_name: Griese, Martin
id: '52308'
last_name: Griese
- first_name: Marc Philippe
full_name: Hoffrath, Marc Philippe
last_name: Hoffrath
- first_name: Timo
full_name: Broeker, Timo
id: '43927'
last_name: Broeker
- first_name: Thomas
full_name: Schulte, Thomas
id: '46242'
last_name: Schulte
- first_name: Jan
full_name: Schneider, Jan
id: '13209'
last_name: Schneider
orcid: 0000-0001-6401-8873
citation:
ama: 'Griese M, Hoffrath MP, Broeker T, Schulte T, Schneider J. Hardware-in-the-Loop
simulation of an optimized energy management incorporating an experimental biocatalytic
methanation reactor. Energy : the international journal. 2019;181:77-90.
doi:10.1016/j.energy.2019.05.092'
apa: 'Griese, M., Hoffrath, M. P., Broeker, T., Schulte, T., & Schneider, J.
(2019). Hardware-in-the-Loop simulation of an optimized energy management incorporating
an experimental biocatalytic methanation reactor. Energy : The International
Journal, 181, 77–90. https://doi.org/10.1016/j.energy.2019.05.092'
bjps: 'Griese M et al. (2019) Hardware-in-the-Loop Simulation of an
Optimized Energy Management Incorporating an Experimental Biocatalytic Methanation
Reactor. Energy : the international journal 181, 77–90.'
chicago: 'Griese, Martin, Marc Philippe Hoffrath, Timo Broeker, Thomas Schulte,
and Jan Schneider. “Hardware-in-the-Loop Simulation of an Optimized Energy Management
Incorporating an Experimental Biocatalytic Methanation Reactor.” Energy : The
International Journal 181 (2019): 77–90. https://doi.org/10.1016/j.energy.2019.05.092.'
chicago-de: 'Griese, Martin, Marc Philippe Hoffrath, Timo Broeker, Thomas Schulte
und Jan Schneider. 2019. Hardware-in-the-Loop simulation of an optimized energy
management incorporating an experimental biocatalytic methanation reactor. Energy :
the international journal 181: 77–90. doi:10.1016/j.energy.2019.05.092,
.'
din1505-2-1: 'Griese, Martin ; Hoffrath, Marc Philippe ; Broeker,
Timo ; Schulte, Thomas ;
Schneider, Jan: Hardware-in-the-Loop
simulation of an optimized energy management incorporating an experimental biocatalytic
methanation reactor. In: Energy : the international journal Bd. 181, Elsevier
(2019), S. 77–90'
havard: 'M. Griese, M.P. Hoffrath, T. Broeker, T. Schulte, J. Schneider, Hardware-in-the-Loop
simulation of an optimized energy management incorporating an experimental biocatalytic
methanation reactor, Energy : The International Journal. 181 (2019) 77–90.'
ieee: 'M. Griese, M. P. Hoffrath, T. Broeker, T. Schulte, and J. Schneider, “Hardware-in-the-Loop
simulation of an optimized energy management incorporating an experimental biocatalytic
methanation reactor,” Energy : the international journal, vol. 181, pp.
77–90, 2019, doi: 10.1016/j.energy.2019.05.092.'
mla: 'Griese, Martin, et al. “Hardware-in-the-Loop Simulation of an Optimized Energy
Management Incorporating an Experimental Biocatalytic Methanation Reactor.” Energy :
The International Journal, vol. 181, 2019, pp. 77–90, https://doi.org/10.1016/j.energy.2019.05.092.'
short: 'M. Griese, M.P. Hoffrath, T. Broeker, T. Schulte, J. Schneider, Energy :
The International Journal 181 (2019) 77–90.'
ufg: 'Griese, Martin u. a.: Hardware-in-the-Loop simulation of an optimized
energy management incorporating an experimental biocatalytic methanation reactor,
in: Energy : the international journal 181 (2019), S. 77–90.'
van: 'Griese M, Hoffrath MP, Broeker T, Schulte T, Schneider J. Hardware-in-the-Loop
simulation of an optimized energy management incorporating an experimental biocatalytic
methanation reactor. Energy : the international journal. 2019;181:77–90.'
conference:
end_date: 2018-06-21
location: Guimaraes, PORTUGAL
name: 31st International Conference on Efficiency, Cost, Optimization, Simulation,
and Environmental Impact of Energy Systems (ECOS)
start_date: 2018-06-17
date_created: 2021-04-08T07:42:48Z
date_updated: 2025-06-25T07:48:53Z
department:
- _id: DEP4023
- _id: DEP4018
doi: 10.1016/j.energy.2019.05.092
external_id:
isi:
- '000476965900009'
intvolume: ' 181'
isi: '1'
keyword:
- Biological methanation
- Energy management
- HIL simulation
- Optimization
- Scalable models
language:
- iso: eng
page: 77 - 90
publication: 'Energy : the international journal'
publication_identifier:
eissn:
- 1873-6785
issn:
- 0360-5442
publication_status: published
publisher: Elsevier
quality_controlled: '1'
status: public
title: Hardware-in-the-Loop simulation of an optimized energy management incorporating
an experimental biocatalytic methanation reactor
type: journal_article
user_id: '83781'
volume: 181
year: '2019'
...
---
_id: '686'
abstract:
- lang: eng
text: A high level of productivity for current and future services is a critical
success factor for companies. When the productivity of services is unknown or
incorrect, resources are wasted and opportunities are missed. To respond to this
challenge, a simulation modelfor the prospective description of a complex service
provision was developed in order to support companies to create a robust offering
of services.Focusing on the domain of factory planning, we illustrate howan extended
Stochastic Resource-Constrained Project Scheduling Problem(SRCPSP) can be applied
for developing proposals. The presented validation study confirms that the approach
is capable to calculate and optimize the planning objectives when developing a
service for complex engineering projects
author:
- first_name: Sven
full_name: Tackenberg, Sven
id: '71470'
last_name: Tackenberg
- first_name: Sönke
full_name: Duckwitz, Sönke
last_name: Duckwitz
- first_name: Thilo Gerhard
full_name: Gamber, Thilo Gerhard
id: '71451'
last_name: Gamber
citation:
ama: 'Tackenberg S, Duckwitz S, Gamber TG. Robust Planning of the Provision of complex
Services. In: Villmer F-J, Padoano E, Department of Production Engineering and
Management, eds. Production Engineering and Management. Lemgo; 2018:271-281.'
apa: Tackenberg, S., Duckwitz, S., & Gamber, T. G. (2018). Robust Planning of
the Provision of complex Services. In F.-J. Villmer, E. Padoano, & Department
of Production Engineering and Management (Eds.), Production Engineering and
Management (pp. 271–281). Lemgo.
bjps: Tackenberg S, Duckwitz S and Gamber TG (2018) Robust Planning of the
Provision of Complex Services. In Villmer F-J, Padoano E and Department of Production
Engineering and Management (eds), Production Engineering and Management.
Lemgo, pp. 271–281.
chicago: Tackenberg, Sven, Sönke Duckwitz, and Thilo Gerhard Gamber. “Robust Planning
of the Provision of Complex Services.” In Production Engineering and Management,
edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering
and Management, 271–81. Lemgo, 2018.
chicago-de: 'Tackenberg, Sven, Sönke Duckwitz und Thilo Gerhard Gamber. 2018. Robust
Planning of the Provision of complex Services. In: Production Engineering and
Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production
Engineering and Management, 271–281. Lemgo.'
din1505-2-1: 'Tackenberg, Sven ; Duckwitz, Sönke ; Gamber,
Thilo Gerhard: Robust Planning of the Provision of complex Services. In:
Villmer, F.-J. ; Padoano,
E. ; Department of Production Engineering
and Management (Hrsg.): Production Engineering and Management. Lemgo,
2018, S. 271–281'
havard: 'S. Tackenberg, S. Duckwitz, T.G. Gamber, Robust Planning of the Provision
of complex Services, in: F.-J. Villmer, E. Padoano, Department of Production Engineering
and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp.
271–281.'
ieee: S. Tackenberg, S. Duckwitz, and T. G. Gamber, “Robust Planning of the Provision
of complex Services,” in Production Engineering and Management, Lemgo,
2018, no. 1, pp. 271–281.
mla: Tackenberg, Sven, et al. “Robust Planning of the Provision of Complex Services.”
Production Engineering and Management, edited by Franz-Josef Villmer et
al., no. 1, 2018, pp. 271–81.
short: 'S. Tackenberg, S. Duckwitz, T.G. Gamber, in: F.-J. Villmer, E. Padoano,
Department of Production Engineering and Management (Eds.), Production Engineering
and Management, Lemgo, 2018, pp. 271–281.'
ufg: 'Tackenberg, Sven et. al. (2018): Robust Planning of the Provision of
complex Services, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering
and Management, Lemgo, S. 271–281.'
van: 'Tackenberg S, Duckwitz S, Gamber TG. Robust Planning of the Provision of complex
Services. In: Villmer F-J, Padoano E, Department of Production Engineering and
Management, editors. Production Engineering and Management. Lemgo; 2018. p. 271–81.'
conference:
end_date: 2018-10-05
location: Lemgo
name: Proceedings 8th International Conference
start_date: 2018-10-04
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-13T16:11:29Z
date_updated: 2023-03-15T13:50:08Z
department:
- _id: DEP7020
- _id: DEP1305
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
issue: '1'
keyword:
- SRCPSP
- Simulation
- Petri Nets
- Proposal development
language:
- iso: eng
page: 271-281
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-946856-03-0
publication_status: published
status: public
title: Robust Planning of the Provision of complex Services
type: conference
user_id: '74004'
year: 2018
...
---
_id: '656'
abstract:
- lang: ger
text: Die Anforderungen an die Gestaltung von Montagesystemen verändern sich. Dazu
tragen kürzer werdende Innovations- und Produktlebenszyklen sowie eine zunehmende
Variantenvielfalt bei, mit der eine Montage von kleinen Losen bis hin zur kundenindividuellen
Montage einhergeht.
author:
- first_name: Alexander
full_name: Unrau, Alexander
id: '64690'
last_name: Unrau
- first_name: Daniel
full_name: Riediger, Daniel
id: '52263'
last_name: Riediger
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
citation:
ama: 'Unrau A, Riediger D, Hinrichsen S. Projektionsgestützte Assistenzsysteme
in der manuellen Montage. Dortmund: REFA; 2016.'
apa: 'Unrau, A., Riediger, D., & Hinrichsen, S. (2016). Projektionsgestützte
Assistenzsysteme in der manuellen Montage. Dortmund: REFA.'
bjps: 'Unrau A, Riediger D and Hinrichsen S (2016) Projektionsgestützte
Assistenzsysteme in der manuellen Montage. Dortmund: REFA.'
chicago: 'Unrau, Alexander, Daniel Riediger, and Sven Hinrichsen. Projektionsgestützte
Assistenzsysteme in der manuellen Montage. Dortmund: REFA, 2016.'
chicago-de: 'Unrau, Alexander, Daniel Riediger und Sven Hinrichsen. 2016. Projektionsgestützte
Assistenzsysteme in der manuellen Montage. Dortmund: REFA.'
din1505-2-1: 'Unrau, Alexander ; Riediger, Daniel ; Hinrichsen,
Sven: Projektionsgestützte Assistenzsysteme in der manuellen Montage.
Dortmund : REFA, 2016'
havard: A. Unrau, D. Riediger, S. Hinrichsen, Projektionsgestützte Assistenzsysteme
in der manuellen Montage, REFA, Dortmund, 2016.
ieee: 'A. Unrau, D. Riediger, and S. Hinrichsen, Projektionsgestützte Assistenzsysteme
in der manuellen Montage. Dortmund: REFA, 2016.'
mla: Unrau, Alexander, et al. Projektionsgestützte Assistenzsysteme in der manuellen
Montage. REFA, 2016.
short: A. Unrau, D. Riediger, S. Hinrichsen, Projektionsgestützte Assistenzsysteme
in der manuellen Montage, REFA, Dortmund, 2016.
ufg: 'Unrau, Alexander et. al. (2016): Projektionsgestützte Assistenzsysteme
in der manuellen Montage, Dortmund.'
van: 'Unrau A, Riediger D, Hinrichsen S. Projektionsgestützte Assistenzsysteme in
der manuellen Montage. Dortmund: REFA; 2016.'
date_created: 2019-03-05T16:26:04Z
date_updated: 2023-03-15T13:50:06Z
department:
- _id: DEP7020
keyword:
- CAD
- PPS
- Prozessdaten
- Simulation
language:
- iso: ger
main_file_link:
- open_access: '1'
url: https://refa.de/blog-industrial-engineering/435-projektionsgestuetzte-assistenzsysteme-in-der-manuellen-montage
oa: '1'
place: Dortmund
publication_status: published
publisher: REFA
status: public
title: Projektionsgestützte Assistenzsysteme in der manuellen Montage
type: report
user_id: '49010'
year: 2016
...
---
_id: '472'
abstract:
- lang: eng
text: "In the context of Industrie 4.0 respectively direct digital manufacturing,
seamless process chains are an important factor. The objective is to shorten the
time between quoting for individually designed products and their production and
delivery. Therefore, reliable automated and fast evaluation procedures are needed
to ensure the quality of the individually designed products in terms of product
safety and reliability. This paper aims \r\nto demonstrate how a metamodel, generated
on simulated data, adapts to the type of product and delivers the required quality
and evaluation procedure. The metamodel guarantees the requested characteristics
of the final product without the consultation of human expert knowledge. As proof
of concept, a simple, well-documented task from the field of construction has
been chosen. The estimation from of the metamodel will meet all safety requirements,
is based on the individual input variables and is confirmed without expert interaction.
Fast, reliable prediction models deriving from complex simulation models are indispensable
conditions for direct digital manufacturing. Using metamodels in automation contexts
will be a foundation of manufacturing in future."
author:
- first_name: Eva
full_name: Scheideler, Eva
id: '61522'
last_name: Scheideler
- first_name: Andrea
full_name: Ahlemeyer-Stubbe, Andrea
last_name: Ahlemeyer-Stubbe
citation:
ama: 'Scheideler E, Ahlemeyer-Stubbe A. Expert Knowledge Systems to Ensure Quality
and Reliability in Direct Digital Manufacturing Enviroments. In: Villmer FJ, Padoano
E, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe,
eds. Production Engineering and Management : Proceedings 6th International
Conference, September 29 and 30, 2016 Lemgo, Germany . Vol 2016. Publication
series in direct digital manufacturing . Hochschule Ostwestfalen-Lippe; 2016:269-280.'
apa: 'Scheideler, E., & Ahlemeyer-Stubbe, A. (2016). Expert Knowledge Systems
to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments.
In F.-J. Villmer, E. Padoano, Department of Production Engineering and Management,
& Hochschule Ostwestfalen-Lippe (Eds.), Production engineering and management :
proceedings 6th international conference, September 29 and 30, 2016 Lemgo, Germany
(Vol. 2016, Issue 1, pp. 269–280). Hochschule Ostwestfalen-Lippe.'
bjps: 'Scheideler E and Ahlemeyer-Stubbe A (2016) Expert Knowledge Systems
to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments.
In Villmer F-J et al. (eds), Production Engineering and Management : Proceedings
6th International Conference, September 29 and 30, 2016 Lemgo, Germany , vol.
2016. Lemgo: Hochschule Ostwestfalen-Lippe, pp. 269–280.'
chicago: 'Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Expert Knowledge Systems
to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments.”
In Production Engineering and Management : Proceedings 6th International Conference,
September 29 and 30, 2016 Lemgo, Germany , edited by Franz-Josef Villmer,
Elio Padoano, Department of Production Engineering and Management, and Hochschule
Ostwestfalen-Lippe, 2016:269–80. Publication Series in Direct Digital Manufacturing
. Lemgo: Hochschule Ostwestfalen-Lippe, 2016.'
chicago-de: 'Scheideler, Eva und Andrea Ahlemeyer-Stubbe. 2016. Expert Knowledge
Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments.
In: Production engineering and management : proceedings 6th international conference,
September 29 and 30, 2016 Lemgo, Germany , hg. von Franz-Josef Villmer, Elio
Padoano, Department of Production Engineering and Management, und Hochschule Ostwestfalen-Lippe,
2016:269–280. Publication series in direct digital manufacturing . Lemgo: Hochschule
Ostwestfalen-Lippe.'
din1505-2-1: 'Scheideler, Eva ; Ahlemeyer-Stubbe, Andrea: Expert Knowledge
Systems to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments.
In: Villmer, F.-J. ; Padoano,
E. ; Department of Production Engineering
and Management ; Hochschule Ostwestfalen-Lippe
(Hrsg.): Production engineering and management : proceedings 6th international
conference, September 29 and 30, 2016 Lemgo, Germany , Publication series
in direct digital manufacturing . Bd. 2016. Lemgo : Hochschule Ostwestfalen-Lippe,
2016, S. 269–280'
havard: 'E. Scheideler, A. Ahlemeyer-Stubbe, Expert Knowledge Systems to Ensure
Quality and Reliability in Direct Digital Manufacturing Enviroments, in: F.-J.
Villmer, E. Padoano, Department of Production Engineering and Management, Hochschule
Ostwestfalen-Lippe (Eds.), Production Engineering and Management : Proceedings
6th International Conference, September 29 and 30, 2016 Lemgo, Germany , Hochschule
Ostwestfalen-Lippe, Lemgo, 2016: pp. 269–280.'
ieee: 'E. Scheideler and A. Ahlemeyer-Stubbe, “Expert Knowledge Systems to Ensure
Quality and Reliability in Direct Digital Manufacturing Enviroments,” in Production
engineering and management : proceedings 6th international conference, September
29 and 30, 2016 Lemgo, Germany , Lemgo, 2016, vol. 2016, no. 1, pp. 269–280.'
mla: 'Scheideler, Eva, and Andrea Ahlemeyer-Stubbe. “Expert Knowledge Systems to
Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments.” Production
Engineering and Management : Proceedings 6th International Conference, September
29 and 30, 2016 Lemgo, Germany , edited by Franz-Josef Villmer et al., vol.
2016, no. 1, Hochschule Ostwestfalen-Lippe, 2016, pp. 269–80.'
short: 'E. Scheideler, A. Ahlemeyer-Stubbe, in: F.-J. Villmer, E. Padoano, Department
of Production Engineering and Management, Hochschule Ostwestfalen-Lippe (Eds.),
Production Engineering and Management : Proceedings 6th International Conference,
September 29 and 30, 2016 Lemgo, Germany , Hochschule Ostwestfalen-Lippe, Lemgo,
2016, pp. 269–280.'
ufg: 'Scheideler, Eva/Ahlemeyer-Stubbe, Andrea: Expert Knowledge Systems
to Ensure Quality and Reliability in Direct Digital Manufacturing Enviroments,
in: Villmer, Franz-Josef u. a. (Hgg.): Production engineering and management :
proceedings 6th international conference, September 29 and 30, 2016 Lemgo, Germany
, Bd. 2016, Lemgo 2016 ( Publication series in direct digital manufacturing ),
S. 269–280.'
van: 'Scheideler E, Ahlemeyer-Stubbe A. Expert Knowledge Systems to Ensure Quality
and Reliability in Direct Digital Manufacturing Enviroments. In: Villmer FJ, Padoano
E, Department of Production Engineering and Management, Hochschule Ostwestfalen-Lippe,
editors. Production engineering and management : proceedings 6th international
conference, September 29 and 30, 2016 Lemgo, Germany . Lemgo: Hochschule Ostwestfalen-Lippe;
2016. p. 269–80. ( Publication series in direct digital manufacturing ; vol.
2016).'
conference:
end_date: 2016-09-30
location: Lemgo
name: '6th International Conference on Production Engineering and Management '
start_date: 2016-09-29
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-01-29T13:06:45Z
date_updated: 2024-03-22T13:18:42Z
department:
- _id: DEP1306
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
intvolume: ' 2016'
issue: '1'
keyword:
- Simulation
- Metamodel
- Computer experiment
- Design of experiments
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf
oa: '1'
page: 269-280
place: Lemgo
publication: 'Production engineering and management : proceedings 6th international
conference, September 29 and 30, 2016 Lemgo, Germany '
publication_identifier:
unknown:
- 978-3-946856-00-9
publication_status: published
publisher: Hochschule Ostwestfalen-Lippe
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf
series_title: "\t Publication series in direct digital manufacturing "
status: public
title: Expert Knowledge Systems to Ensure Quality and Reliability in Direct Digital
Manufacturing Enviroments
type: conference
user_id: '83781'
volume: 2016
year: '2016'
...
---
_id: '421'
abstract:
- lang: ger
text: "Es wird ein agentenbasiertes Planungsverfahren vorgestellt, das die Vereinbarkeit
von Berufs- und Privatleben des Personals besser als bisher gewährleisten soll.
Dabei wird durch eine Verbesserung der Einsatzzeitplanung sowohl den individuellen
Präferenzen des Personals als auch einer fairen Berücksichtigung der Arbeitszeitwünsche
Rechnung getragen. Hinsichtlich der betrieblichen Anforderungen und deren Erfüllung
durch die geplanten Einsatzzeiten des Personals erfolgt eine dynamische Bewertung
der Arbeitsabläufe mit Hilfe der personalorientierten Simulation.\r\n\r\nDissertation
am Institut für Arbeitswissenschaft und Betriebsorganisation (Karlsruhe): Forschungsberichte
aus dem Institut für Arbeitswissenschaft und Betriebsorganisation der Universität
Karlsruhe ; Bd. 44"
author:
- first_name: Thilo Gerhard
full_name: Gamber, Thilo Gerhard
id: '71451'
last_name: Gamber
citation:
ama: 'Gamber TG. Entwicklung eines Verfahrens zur agentenbasierten Einsatzzeitgestaltung.
Aachen: Shaker Verlag; 2015.'
apa: 'Gamber, T. G. (2015). Entwicklung eines Verfahrens zur agentenbasierten
Einsatzzeitgestaltung. Aachen: Shaker Verlag.'
bjps: 'Gamber TG (2015) Entwicklung eines Verfahrens zur agentenbasierten
Einsatzzeitgestaltung. Aachen: Shaker Verlag.'
chicago: 'Gamber, Thilo Gerhard. Entwicklung eines Verfahrens zur agentenbasierten
Einsatzzeitgestaltung. Aachen: Shaker Verlag, 2015.'
chicago-de: 'Gamber, Thilo Gerhard. 2015. Entwicklung eines Verfahrens zur agentenbasierten
Einsatzzeitgestaltung. Aachen: Shaker Verlag.'
din1505-2-1: 'Gamber, Thilo Gerhard:
Entwicklung eines Verfahrens zur agentenbasierten Einsatzzeitgestaltung.
Aachen : Shaker Verlag, 2015'
havard: T.G. Gamber, Entwicklung eines Verfahrens zur agentenbasierten Einsatzzeitgestaltung,
Shaker Verlag, Aachen, 2015.
ieee: 'T. G. Gamber, Entwicklung eines Verfahrens zur agentenbasierten Einsatzzeitgestaltung.
Aachen: Shaker Verlag, 2015.'
mla: Gamber, Thilo Gerhard. Entwicklung eines Verfahrens zur agentenbasierten
Einsatzzeitgestaltung. Shaker Verlag, 2015.
short: T.G. Gamber, Entwicklung eines Verfahrens zur agentenbasierten Einsatzzeitgestaltung,
Shaker Verlag, Aachen, 2015.
ufg: 'Gamber, Thilo Gerhard (2015): Entwicklung eines Verfahrens zur agentenbasierten
Einsatzzeitgestaltung, Aachen.'
van: 'Gamber TG. Entwicklung eines Verfahrens zur agentenbasierten Einsatzzeitgestaltung.
Aachen: Shaker Verlag; 2015. 289 p.'
date_created: 2019-01-16T14:53:31Z
date_updated: 2023-03-15T13:49:51Z
ddc:
- '650'
extern: '1'
keyword:
- Arbeitszeitgestaltung
- Personaleinsatz
- Simulation
language:
- iso: ger
page: '289'
place: Aachen
publication_identifier:
isbn:
- 978-3-8440-3518-6
publication_status: published
publisher: Shaker Verlag
related_material:
link:
- relation: table_of_contents
url: http://digitale-objekte.hbz-nrw.de/storage2/2015/08/30/file_18/6393849.pdf
status: public
title: Entwicklung eines Verfahrens zur agentenbasierten Einsatzzeitgestaltung
type: dissertation
user_id: '74004'
year: 2015
...
---
_id: '422'
author:
- first_name: Thilo Gerhard
full_name: Gamber, Thilo Gerhard
id: '71451'
last_name: Gamber
- first_name: Gert
full_name: Zülch, Gert
last_name: Zülch
citation:
ama: 'Gamber TG, Zülch G. Agentenbasierte Planung und simulationsunterstützte Bewertung
praferenzorientierter Einsatzzeiten des Personals . In: Rabe M, Clausen U, Fraunhofer-Institut
für materialfluss und Logistik IML, eds. Simulation in production and logistics
2015. Stuttgart: Fraunhofer Verlag; 2015:711-720.'
apa: 'Gamber, T. G., & Zülch, G. (2015). Agentenbasierte Planung und simulationsunterstützte
Bewertung praferenzorientierter Einsatzzeiten des Personals . In M. Rabe, U. Clausen,
& Fraunhofer-Institut für materialfluss und Logistik IML (Eds.), Simulation
in production and logistics 2015 (pp. 711–720). Stuttgart: Fraunhofer Verlag.'
bjps: 'Gamber TG and Zülch G (2015) Agentenbasierte Planung und simulationsunterstützte
Bewertung praferenzorientierter Einsatzzeiten des Personals . In Rabe M, Clausen
U and Fraunhofer-Institut für materialfluss und Logistik IML (eds), Simulation
in production and logistics 2015. Stuttgart: Fraunhofer Verlag, pp. 711–720.'
chicago: 'Gamber, Thilo Gerhard, and Gert Zülch. “Agentenbasierte Planung und simulationsunterstützte
Bewertung praferenzorientierter Einsatzzeiten des Personals .” In Simulation
in production and logistics 2015, edited by Markus Rabe, Uwe Clausen, and
Fraunhofer-Institut für materialfluss und Logistik IML, 711–20. Stuttgart: Fraunhofer
Verlag, 2015.'
chicago-de: 'Gamber, Thilo Gerhard und Gert Zülch. 2015. Agentenbasierte Planung
und simulationsunterstützte Bewertung praferenzorientierter Einsatzzeiten des
Personals . In: Simulation in production and logistics 2015, hg. von Markus
Rabe, Uwe Clausen, und Fraunhofer-Institut für materialfluss und Logistik IML,
711–720. Stuttgart: Fraunhofer Verlag.'
din1505-2-1: 'Gamber, Thilo Gerhard
; Zülch, Gert: Agentenbasierte Planung
und simulationsunterstützte Bewertung praferenzorientierter Einsatzzeiten des
Personals . In: Rabe, M. ; Clausen, U. ; Fraunhofer-Institut
für materialfluss und Logistik IML (Hrsg.): Simulation in production
and logistics 2015. Stuttgart : Fraunhofer Verlag, 2015, S. 711–720'
havard: 'T.G. Gamber, G. Zülch, Agentenbasierte Planung und simulationsunterstützte
Bewertung praferenzorientierter Einsatzzeiten des Personals , in: M. Rabe, U.
Clausen, Fraunhofer-Institut für materialfluss und Logistik IML (Eds.), Simulation
in production and logistics 2015, Fraunhofer Verlag, Stuttgart, 2015: pp. 711–720.'
ieee: T. G. Gamber and G. Zülch, “Agentenbasierte Planung und simulationsunterstützte
Bewertung praferenzorientierter Einsatzzeiten des Personals ,” in Simulation
in production and logistics 2015, Dortmund, 2015, pp. 711–720.
mla: Gamber, Thilo Gerhard, and Gert Zülch. “Agentenbasierte Planung und simulationsunterstützte
Bewertung praferenzorientierter Einsatzzeiten des Personals .” Simulation in
production and logistics 2015, edited by Markus Rabe et al., Fraunhofer Verlag,
2015, pp. 711–20.
short: 'T.G. Gamber, G. Zülch, in: M. Rabe, U. Clausen, Fraunhofer-Institut für
materialfluss und Logistik IML (Eds.), Simulation in production and logistics
2015, Fraunhofer Verlag, Stuttgart, 2015, pp. 711–720.'
ufg: 'Gamber, Thilo Gerhard/Zülch, Gert (2015): Agentenbasierte Planung und
simulationsunterstützte Bewertung praferenzorientierter Einsatzzeiten des Personals
, in: Markus Rabe et. al. (Hgg.): Simulation in production and logistics 2015,
Stuttgart, S. 711–720.'
van: 'Gamber TG, Zülch G. Agentenbasierte Planung und simulationsunterstützte Bewertung
praferenzorientierter Einsatzzeiten des Personals . In: Rabe M, Clausen U, Fraunhofer-Institut
für materialfluss und Logistik IML, editors. Simulation in production and logistics
2015. Stuttgart: Fraunhofer Verlag; 2015. p. 711–20.'
conference:
end_date: 2015-09-25
location: Dortmund
name: Proceedings ASIM 2015 Conference "Simulation in Production and Logistics 2015
start_date: 2015-09-23
corporate_editor:
- Fraunhofer-Institut für materialfluss und Logistik IML
date_created: 2019-01-16T15:07:24Z
date_updated: 2023-03-15T13:49:51Z
editor:
- first_name: Markus
full_name: Rabe, Markus
last_name: Rabe
- first_name: Uwe
full_name: Clausen, Uwe
last_name: Clausen
extern: '1'
keyword:
- Produktion
- Logistik
- Simulation
language:
- iso: ger
page: 711-720
place: Stuttgart
publication: Simulation in production and logistics 2015
publication_identifier:
isbn:
- 978-3-8396-0936-1
publication_status: published
publisher: Fraunhofer Verlag
related_material:
link:
- relation: table_of_contents
url: http://digitale-objekte.hbz-nrw.de/storage2/2015/11/07/file_38/6502557.pdf
status: public
title: 'Agentenbasierte Planung und simulationsunterstützte Bewertung praferenzorientierter
Einsatzzeiten des Personals '
type: conference
user_id: '74004'
year: 2015
...
---
_id: '4395'
abstract:
- lang: eng
text: This paper presents the evaluation of a mixed reality communication system
for the home domain, called roomXT. The system uses a wall-sized display that
is seamlessly integrated into a living lab, to create a 'life-like' video communication
experience. In order to demonstrate the potential of this approach, we conducted
a living lab study comparing the developed prototype with a desktop-based system.
A special video communication application, which enables spatially separated users
to have a joint dinner experience, served as a common basis for the different
test conditions. Results of the study show that the overall concept of roomXT
was well eceived by users of a wide age range and that the developed prototype
system seems to be preferred to commercially available video communication solutions
with respect to the tested quality dimensions.
author:
- first_name: Kai
full_name: Kasugai, Kai
last_name: Kasugai
- first_name: Felix
full_name: Heidrich, Felix
last_name: Heidrich
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
- first_name: Peter
full_name: Russell, Peter
last_name: Russell
- first_name: Martina
full_name: Ziefle, Martina
last_name: Ziefle
citation:
ama: 'Kasugai K, Heidrich F, Röcker C, Russell P, Ziefle M. Perspective Views in
Video Communication Systems: An Analysis of Fundamental User Requirements. In:
José R, ed. Proceedings of the 2012 International Symposium on Pervasive Displays.
New York: ACM; 2012:1-6. doi:10.1145/2307798.2307811'
apa: 'Kasugai, K., Heidrich, F., Röcker, C., Russell, P., & Ziefle, M. (2012).
Perspective Views in Video Communication Systems: An Analysis of Fundamental User
Requirements. In R. José (Ed.), Proceedings of the 2012 International Symposium
on Pervasive Displays (pp. 1–6). New York: ACM. https://doi.org/10.1145/2307798.2307811'
bjps: 'Kasugai K et al. (2012) Perspective Views in Video Communication
Systems: An Analysis of Fundamental User Requirements. In José R (ed.), Proceedings
of the 2012 International Symposium on Pervasive Displays. New York: ACM,
pp. 1–6.'
chicago: 'Kasugai, Kai, Felix Heidrich, Carsten Röcker, Peter Russell, and Martina
Ziefle. “Perspective Views in Video Communication Systems: An Analysis of Fundamental
User Requirements.” In Proceedings of the 2012 International Symposium on Pervasive
Displays, edited by Rui José, 1–6. New York: ACM, 2012. https://doi.org/10.1145/2307798.2307811.'
chicago-de: 'Kasugai, Kai, Felix Heidrich, Carsten Röcker, Peter Russell und Martina
Ziefle. 2012. Perspective Views in Video Communication Systems: An Analysis of
Fundamental User Requirements. In: Proceedings of the 2012 International Symposium
on Pervasive Displays, hg. von Rui José, 1–6. New York: ACM. doi:10.1145/2307798.2307811,
.'
din1505-2-1: 'Kasugai, Kai ; Heidrich, Felix ; Röcker,
Carsten ; Russell, Peter
; Ziefle, Martina: Perspective Views
in Video Communication Systems: An Analysis of Fundamental User Requirements.
In: José, R. (Hrsg.): Proceedings
of the 2012 International Symposium on Pervasive Displays. New York : ACM,
2012, S. 1–6'
havard: 'K. Kasugai, F. Heidrich, C. Röcker, P. Russell, M. Ziefle, Perspective
Views in Video Communication Systems: An Analysis of Fundamental User Requirements,
in: R. José (Ed.), Proceedings of the 2012 International Symposium on Pervasive
Displays, ACM, New York, 2012: pp. 1–6.'
ieee: 'K. Kasugai, F. Heidrich, C. Röcker, P. Russell, and M. Ziefle, “Perspective
Views in Video Communication Systems: An Analysis of Fundamental User Requirements,”
in Proceedings of the 2012 International Symposium on Pervasive Displays,
Porto, Portugal , 2012, pp. 1–6.'
mla: 'Kasugai, Kai, et al. “Perspective Views in Video Communication Systems: An
Analysis of Fundamental User Requirements.” Proceedings of the 2012 International
Symposium on Pervasive Displays, edited by Rui José, ACM, 2012, pp. 1–6, doi:10.1145/2307798.2307811.'
short: 'K. Kasugai, F. Heidrich, C. Röcker, P. Russell, M. Ziefle, in: R. José (Ed.),
Proceedings of the 2012 International Symposium on Pervasive Displays, ACM, New
York, 2012, pp. 1–6.'
ufg: 'Kasugai, Kai et. al. (2012): Perspective Views in Video Communication
Systems: An Analysis of Fundamental User Requirements, in: Rui José (Hg.): Proceedings
of the 2012 International Symposium on Pervasive Displays, New York, S. 1–6.'
van: 'Kasugai K, Heidrich F, Röcker C, Russell P, Ziefle M. Perspective Views in
Video Communication Systems: An Analysis of Fundamental User Requirements. In:
José R, editor. Proceedings of the 2012 International Symposium on Pervasive Displays.
New York: ACM; 2012. p. 1–6.'
conference:
end_date: 2012-06
location: 'Porto, Portugal '
name: 'PerDis 2012: The International Symposium on Pervasive Displays'
start_date: 2012-06
date_created: 2021-01-15T15:20:55Z
date_updated: 2023-03-15T13:49:52Z
department:
- _id: DEP5023
doi: 10.1145/2307798.2307811
editor:
- first_name: Rui
full_name: José, Rui
last_name: José
extern: '1'
keyword:
- human-computer interaction
- mixed-reality
- large displays
- co-dining
- interactive media
- family communication
- co-presence
- architecture
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 1-6
place: New York
publication: Proceedings of the 2012 International Symposium on Pervasive Displays
publication_identifier:
isbn:
- '978-145-031-414-5 '
publication_status: published
publisher: ACM
status: public
title: 'Perspective Views in Video Communication Systems: An Analysis of Fundamental
User Requirements'
type: conference
user_id: '15514'
year: 2012
...
---
_id: '11225'
author:
- first_name: Dominik
full_name: Düchs, Dominik
last_name: Düchs
- first_name: Sabine
full_name: Brunklaus, Sabine
last_name: Brunklaus
- first_name: Peter
full_name: Spang, Peter
last_name: Spang
- first_name: Marion
full_name: Ritzi-Lehnert, Marion
last_name: Ritzi-Lehnert
- first_name: Klaus S.
full_name: Drese, Klaus S.
last_name: Drese
citation:
ama: Düchs D, Brunklaus S, Spang P, Ritzi-Lehnert M, Drese KS. Numerical Study
of Micromixers for Stopped Flow. Vol 2. ( American Society of Mechanical Engineers
, ed.). American Society of Mechanical Engineers; 2011:151-153. doi:10.1115/ICNMM2011-58128
apa: 'Düchs, D., Brunklaus, S., Spang, P., Ritzi-Lehnert, M., & Drese, K. S.
(2011). Numerical study of micromixers for stopped flow. In American Society
of Mechanical Engineers (Ed.), Proceedings of the ASME 9th International Conference
on Nanochannels, Microchannels and Minichannels - 2011 : presented at 9th International
Conference on Nanochannels, Microchannels and Minichannels, June 19 - 22, 2011,
Edmonton, Canada (Vol. 2, pp. 151–153). American Society of Mechanical Engineers.
https://doi.org/10.1115/ICNMM2011-58128'
bjps: 'Düchs D et al. (2011) Numerical Study of Micromixers for
Stopped Flow, American Society of Mechanical Engineers (ed.). New York,
NY : American Society of Mechanical Engineers.'
chicago: 'Düchs, Dominik, Sabine Brunklaus, Peter Spang, Marion Ritzi-Lehnert, and
Klaus S. Drese. Numerical Study of Micromixers for Stopped Flow. Edited
by American Society of Mechanical Engineers . Proceedings of the ASME 9th
International Conference on Nanochannels, Microchannels and Minichannels - 2011 :
Presented at 9th International Conference on Nanochannels, Microchannels and Minichannels,
June 19 - 22, 2011, Edmonton, Canada. Vol. 2. Proceedings of the ASME 2011. New
York, NY : American Society of Mechanical Engineers, 2011. https://doi.org/10.1115/ICNMM2011-58128.'
chicago-de: 'Düchs, Dominik, Sabine Brunklaus, Peter Spang, Marion Ritzi-Lehnert
und Klaus S. Drese. 2011. Numerical study of micromixers for stopped flow.
Hg. von American Society of Mechanical Engineers . Proceedings of the ASME
9th International Conference on Nanochannels, Microchannels and Minichannels -
2011 : presented at 9th International Conference on Nanochannels, Microchannels
and Minichannels, June 19 - 22, 2011, Edmonton, Canada. Bd. 2. Proceedings
of the ASME 2011. New York, NY : American Society of Mechanical Engineers. doi:10.1115/ICNMM2011-58128, .'
din1505-2-1: 'Düchs, Dominik ; Brunklaus, Sabine ; Spang,
Peter ; Ritzi-Lehnert, Marion
; Drese, Klaus S. ;
American Society of Mechanical Engineers (Hrsg.): Numerical study of
micromixers for stopped flow, Proceedings of the ASME 2011. Bd. 2. New
York, NY : American Society of Mechanical Engineers, 2011'
havard: D. Düchs, S. Brunklaus, P. Spang, M. Ritzi-Lehnert, K.S. Drese, Numerical
study of micromixers for stopped flow, American Society of Mechanical Engineers, New
York, NY , 2011.
ieee: 'D. Düchs, S. Brunklaus, P. Spang, M. Ritzi-Lehnert, and K. S. Drese, Numerical
study of micromixers for stopped flow, vol. 2. New York, NY : American Society
of Mechanical Engineers, 2011, pp. 151–153. doi: 10.1115/ICNMM2011-58128.'
mla: 'Düchs, Dominik, et al. “Numerical Study of Micromixers for Stopped Flow.”
Proceedings of the ASME 9th International Conference on Nanochannels, Microchannels
and Minichannels - 2011 : Presented at 9th International Conference on Nanochannels,
Microchannels and Minichannels, June 19 - 22, 2011, Edmonton, Canada, edited
by American Society of Mechanical Engineers , vol. 2, American Society of Mechanical
Engineers, 2011, pp. 151–53, https://doi.org/10.1115/ICNMM2011-58128.'
short: D. Düchs, S. Brunklaus, P. Spang, M. Ritzi-Lehnert, K.S. Drese, Numerical
Study of Micromixers for Stopped Flow, American Society of Mechanical Engineers, New
York, NY , 2011.
ufg: 'Düchs, Dominik u. a.: Numerical study of micromixers for stopped flow,
Bd. 2, hg. von American Society of Mechanical Engineers , New York, NY 2011
(Proceedings of the ASME 2011).'
van: 'Düchs D, Brunklaus S, Spang P, Ritzi-Lehnert M, Drese KS. Numerical study
of micromixers for stopped flow. American Society of Mechanical Engineers , editor.
Proceedings of the ASME 9th International Conference on Nanochannels, Microchannels
and Minichannels - 2011 : presented at 9th International Conference on Nanochannels,
Microchannels and Minichannels, June 19 - 22, 2011, Edmonton, Canada. New York,
NY : American Society of Mechanical Engineers; 2011. (Proceedings of the ASME
2011; vol. 2).'
conference:
end_date: 2011-06-22
location: 'Edmonton, Alberta, Canada '
name: ' 9th International Conference on Nanochannels, Microchannels, and Minichannels '
start_date: 2011-06-19
corporate_editor:
- ' American Society of Mechanical Engineers '
date_created: 2024-03-17T12:43:27Z
date_updated: 2024-06-26T13:53:37Z
doi: 10.1115/ICNMM2011-58128
intvolume: ' 2'
keyword:
- CFD-Simulation
language:
- iso: eng
page: 151-153
place: ' New York, NY '
publication: 'Proceedings of the ASME 9th International Conference on Nanochannels,
Microchannels and Minichannels - 2011 : presented at 9th International Conference
on Nanochannels, Microchannels and Minichannels, June 19 - 22, 2011, Edmonton, Canada'
publication_identifier:
isbn:
- ' 978-0-7918-4464-9 '
publication_status: published
publisher: American Society of Mechanical Engineers
quality_controlled: '1'
related_material:
link:
- relation: confirmation
url: https://asmedigitalcollection.asme.org/ICNMM/proceedings-abstract/ICNMM2011/44649/151/351366?redirectedFrom=PDF
series_title: Proceedings of the ASME 2011
status: public
title: Numerical study of micromixers for stopped flow
type: conference_editor_article
user_id: '65129'
volume: 2
year: '2011'
...
---
_id: '5932'
abstract:
- lang: eng
text: Groupage transports are frequently calculated based on freight rates assuming
a declining rate with respect to volume and to transportation distance. This paper
investigates the case of feeding many small shipments to customers via a freight
forwarder network. It is argued that costs for post-carriage transport dominate
other costs. Based on a theoretical estimate, simulation experiments for the case
of a uniform distribution of customer locations around the subsidiary with a fixed
shipment size per drop suggest that the aggregate costs grow progressively with
increasing customer drop distances from the subsidiary. The resulting implications
for transport modelling are discussed.
author:
- first_name: Nicholas
full_name: Boone, Nicholas
id: '24251'
last_name: Boone
- first_name: Tim
full_name: Quisbrock, Tim
id: '24033'
last_name: Quisbrock
citation:
ama: 'Boone N, Quisbrock T. Modelling post-carriage transport costs in groupage
networks. In: Advanced Manufacturing and Sustainable Logistics : Proceedings
/ 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn. Berlin:
Springer; 2011:332-344. doi:doi.org/10.1007/978-3-642-12494-5_30'
apa: 'Boone, N., & Quisbrock, T. (2011). Modelling post-carriage transport costs
in groupage networks. In Advanced manufacturing and sustainable logistics :
proceedings / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn
(pp. 332–344). Berlin: Springer. https://doi.org/doi.org/10.1007/978-3-642-12494-5_30'
bjps: 'Boone N and Quisbrock T (2011) Modelling Post-Carriage Transport Costs
in Groupage Networks. Advanced Manufacturing and Sustainable Logistics : Proceedings
/ 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn. Berlin:
Springer, pp. 332–344.'
chicago: 'Boone, Nicholas, and Tim Quisbrock. “Modelling Post-Carriage Transport
Costs in Groupage Networks.” In Advanced Manufacturing and Sustainable Logistics :
Proceedings / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn,
332–44. Berlin: Springer, 2011. https://doi.org/doi.org/10.1007/978-3-642-12494-5_30.'
chicago-de: 'Boone, Nicholas und Tim Quisbrock. 2011. Modelling post-carriage transport
costs in groupage networks. In: Advanced manufacturing and sustainable logistics :
proceedings / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn,
332–344. Berlin: Springer. doi:doi.org/10.1007/978-3-642-12494-5_30,
.'
din1505-2-1: 'Boone, Nicholas ; Quisbrock, Tim: Modelling post-carriage
transport costs in groupage networks. In: Advanced manufacturing and sustainable
logistics : proceedings / 8th International Heinz Nixdorf Symposium, IHNS 2010,
Paderborn. Berlin : Springer, 2011, S. 332–344'
havard: 'N. Boone, T. Quisbrock, Modelling post-carriage transport costs in groupage
networks, in: Advanced Manufacturing and Sustainable Logistics : Proceedings /
8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn, Springer, Berlin,
2011: pp. 332–344.'
ieee: 'N. Boone and T. Quisbrock, “Modelling post-carriage transport costs in groupage
networks,” in Advanced manufacturing and sustainable logistics : proceedings
/ 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn, Berlin:
Springer, 2011, pp. 332–344.'
mla: 'Boone, Nicholas, and Tim Quisbrock. “Modelling Post-Carriage Transport Costs
in Groupage Networks.” Advanced Manufacturing and Sustainable Logistics : Proceedings
/ 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn, Springer,
2011, pp. 332–44, doi:doi.org/10.1007/978-3-642-12494-5_30.'
short: 'N. Boone, T. Quisbrock, in: Advanced Manufacturing and Sustainable Logistics :
Proceedings / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn,
Springer, Berlin, 2011, pp. 332–344.'
ufg: 'Boone, Nicholas/Quisbrock, Tim (2011): Modelling post-carriage transport
costs in groupage networks, in: Advanced manufacturing and sustainable logistics :
proceedings / 8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn,
Berlin, S. 332–344.'
van: 'Boone N, Quisbrock T. Modelling post-carriage transport costs in groupage
networks. In: Advanced manufacturing and sustainable logistics : proceedings /
8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn. Berlin: Springer;
2011. p. 332–44.'
conference:
end_date: 2010-04-22
location: Paderborn
name: 8th International Heinz Nixdorf Symposium, IHNS 2010
start_date: 2010-04-21
date_created: 2021-05-19T07:26:49Z
date_updated: 2023-03-15T13:50:03Z
department:
- _id: DEP1520
doi: doi.org/10.1007/978-3-642-12494-5_30
keyword:
- cost-by-cause principle
- freight forwarder
- freight rates
- network
- overhead costs
- pricing
- simulation
- transport
language:
- iso: eng
page: 332-344
place: Berlin
publication: 'Advanced manufacturing and sustainable logistics : proceedings / 8th
International Heinz Nixdorf Symposium, IHNS 2010, Paderborn'
publication_identifier:
eisbn:
- 978-3-642-12494-5
isbn:
- 978-3-642-12461-7
publication_status: published
publisher: Springer
status: public
title: Modelling post-carriage transport costs in groupage networks
type: book_chapter
user_id: '15514'
year: 2011
...
---
_id: '4494'
abstract:
- lang: eng
text: This paper gives an overview of how the role of architecture, design, and
HCI is to be redefined in a world of ubiquitous computing and the recent advances
in display technology. It describes the future care lab and our take on research
in this field. We elaborate on how wall-sized displays can form an integral part
of an ambient intelligence space that aims to assist the elderly and empower them
to stay longer in their familiar surroundings before moving into nursing homes.
We propose a classification of different concepts that virtually extend a real
environment and describe some possible scenarios.
author:
- first_name: Kai
full_name: Kasugai, Kai
last_name: Kasugai
- first_name: Martina
full_name: Ziefle, Martina
last_name: Ziefle
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
- first_name: Peter
full_name: Russell, Peter
last_name: Russell
citation:
ama: 'Kasugai K, Ziefle M, Röcker C, Russell P. Creating Spatio-Temporal Contiguities
Between Real and Virtual Rooms in an Assistive Living Environment. In: Bonner,
J, O’Neill M, Mival O, eds. Proceedings of Create’10 - Innovative Interactions.
; 2010:40-45. doi:10.14236/ewic/CREATE2010.8'
apa: Kasugai, K., Ziefle, M., Röcker, C., & Russell, P. (2010). Creating Spatio-Temporal
Contiguities Between Real and Virtual Rooms in an Assistive Living Environment.
In J. Bonner, M. O’Neill, & O. Mival (Eds.), Proceedings of Create’10 -
Innovative Interactions (pp. 40–45). Loughborough, UK. https://doi.org/10.14236/ewic/CREATE2010.8
bjps: Kasugai K et al. (2010) Creating Spatio-Temporal Contiguities
Between Real and Virtual Rooms in an Assistive Living Environment. In Bonner,
J, O’Neill M and Mival O (eds), Proceedings of Create’10 - Innovative Interactions.
pp. 40–45.
chicago: Kasugai, Kai, Martina Ziefle, Carsten Röcker, and Peter Russell. “Creating
Spatio-Temporal Contiguities Between Real and Virtual Rooms in an Assistive Living
Environment.” In Proceedings of Create’10 - Innovative Interactions, edited
by J. Bonner, M. O’Neill, and O. Mival, 40–45, 2010. https://doi.org/10.14236/ewic/CREATE2010.8.
chicago-de: 'Kasugai, Kai, Martina Ziefle, Carsten Röcker und Peter Russell. 2010.
Creating Spatio-Temporal Contiguities Between Real and Virtual Rooms in an Assistive
Living Environment. In: Proceedings of Create’10 - Innovative Interactions,
hg. von J. Bonner, M. O’Neill, und O. Mival, 40–45. doi:10.14236/ewic/CREATE2010.8,
.'
din1505-2-1: 'Kasugai, Kai ; Ziefle, Martina ; Röcker,
Carsten ; Russell, Peter:
Creating Spatio-Temporal Contiguities Between Real and Virtual Rooms in an Assistive
Living Environment. In: Bonner, J.
; O’Neill, M. ; Mival,
O. (Hrsg.): Proceedings of Create’10 - Innovative Interactions,
2010, S. 40–45'
havard: 'K. Kasugai, M. Ziefle, C. Röcker, P. Russell, Creating Spatio-Temporal
Contiguities Between Real and Virtual Rooms in an Assistive Living Environment,
in: J. Bonner, M. O’Neill, O. Mival (Eds.), Proceedings of Create’10 - Innovative
Interactions, 2010: pp. 40–45.'
ieee: K. Kasugai, M. Ziefle, C. Röcker, and P. Russell, “Creating Spatio-Temporal
Contiguities Between Real and Virtual Rooms in an Assistive Living Environment,”
in Proceedings of Create’10 - Innovative Interactions, Loughborough, UK,
2010, pp. 40–45.
mla: Kasugai, Kai, et al. “Creating Spatio-Temporal Contiguities Between Real and
Virtual Rooms in an Assistive Living Environment.” Proceedings of Create’10
- Innovative Interactions, edited by J. Bonner, et al., 2010, pp. 40–45, doi:10.14236/ewic/CREATE2010.8.
short: 'K. Kasugai, M. Ziefle, C. Röcker, P. Russell, in: J. Bonner, M. O’Neill,
O. Mival (Eds.), Proceedings of Create’10 - Innovative Interactions, 2010, pp.
40–45.'
ufg: 'Kasugai, Kai et. al. (2010): Creating Spatio-Temporal Contiguities
Between Real and Virtual Rooms in an Assistive Living Environment, in: J. Bonner,
et. al. (Hgg.): Proceedings of Create’10 - Innovative Interactions, S.
40–45.'
van: 'Kasugai K, Ziefle M, Röcker C, Russell P. Creating Spatio-Temporal Contiguities
Between Real and Virtual Rooms in an Assistive Living Environment. In: Bonner,
J, O’Neill M, Mival O, editors. Proceedings of Create’10 - Innovative Interactions.
2010. p. 40–5.'
conference:
end_date: 2010-07-02
location: Loughborough, UK
name: 'Proceedings of Create’10 '
start_date: 2010-06-30
date_created: 2021-01-21T09:21:26Z
date_updated: 2023-03-15T13:49:53Z
department:
- _id: DEP5023
doi: 10.14236/ewic/CREATE2010.8
editor:
- first_name: J.
full_name: Bonner,, J.
last_name: Bonner,
- first_name: M.
full_name: O’Neill, M.
last_name: O’Neill
- first_name: O.
full_name: Mival, O.
last_name: Mival
extern: '1'
keyword:
- mixed reality
- immersive co-location
- ambient assisted living
- architecture
- smart spaces
- spatial extension
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 40-45
publication: Proceedings of Create’10 - Innovative Interactions
publication_identifier:
eisbn:
- 978-0-9554-2254-6
publication_status: published
status: public
title: Creating Spatio-Temporal Contiguities Between Real and Virtual Rooms in an
Assistive Living Environment
type: conference
user_id: '15514'
year: 2010
...
---
_id: '617'
abstract:
- lang: eng
text: "The production of high quality, customer-oriented but equally competitive
products should encourage the manufacturers of construction materials to ensure
that the non value-adding activities are continuously reduced within production.
Against\r\nthis background, an approach was developed, based on a combination
of static value stream mapping and dynamic simulation. By means of a pilot study
from a company of the construction materials industry, the developed approach
is presented."
author:
- first_name: Mikko
full_name: Börkircher, Mikko
last_name: Börkircher
- first_name: Thilo Gerhard
full_name: Gamber, Thilo Gerhard
id: '71451'
last_name: Gamber
citation:
ama: 'Börkircher M, Gamber TG. Simulationsunterstütztes Wertstromdesign: Ansatz
zur Steigerung des Wertschöpfungspotenzials in der Baustoffindustrie. In: Zülch
G, Institut für Arbeitswissenschaft und Betriebsorganisation (IFAB), eds. Integrationsaspekte
der Simulation: Technik, Orgnisation und Personal, Karlsruhe, 7. und 8. Oktober
2010 = Integration Aspects of Simulation: Equipment, Organization and Personnell,
Karlsruhe, 7th and 8th October 2010. Karlsruhe: KIT; 2010:405-412. doi: DOI: 10.5445/KSP/1000019635
'
apa: 'Börkircher, M., & Gamber, T. G. (2010). Simulationsunterstütztes Wertstromdesign:
Ansatz zur Steigerung des Wertschöpfungspotenzials in der Baustoffindustrie. In
G. Zülch & Institut für Arbeitswissenschaft und Betriebsorganisation (IFAB)
(Eds.), Integrationsaspekte der Simulation: Technik, Orgnisation und Personal,
Karlsruhe, 7. und 8. Oktober 2010 = Integration Aspects of Simulation: Equipment,
Organization and Personnell, Karlsruhe, 7th and 8th October 2010. (pp. 405–412).
Karlsruhe: KIT. https://doi.org/
DOI: 10.5445/KSP/1000019635 '
bjps: 'Börkircher M and Gamber TG (2010) Simulationsunterstütztes Wertstromdesign:
Ansatz zur Steigerung des Wertschöpfungspotenzials in der Baustoffindustrie. In
Zülch G and Institut für Arbeitswissenschaft und Betriebsorganisation (IFAB) (eds),
Integrationsaspekte der Simulation: Technik, Orgnisation und Personal, Karlsruhe,
7. und 8. Oktober 2010 = Integration Aspects of Simulation: Equipment, Organization
and Personnell, Karlsruhe, 7th and 8th October 2010. Karlsruhe: KIT, pp. 405–412.'
chicago: 'Börkircher, Mikko, and Thilo Gerhard Gamber. “Simulationsunterstütztes
Wertstromdesign: Ansatz zur Steigerung des Wertschöpfungspotenzials in der Baustoffindustrie.”
In Integrationsaspekte der Simulation: Technik, Orgnisation und Personal, Karlsruhe,
7. und 8. Oktober 2010 = Integration Aspects of Simulation: Equipment, Organization
and Personnell, Karlsruhe, 7th and 8th October 2010., edited by G. Zülch and
Institut für Arbeitswissenschaft und Betriebsorganisation (IFAB), 405–12. Karlsruhe:
KIT, 2010. https://doi.org/
DOI: 10.5445/KSP/1000019635 .'
chicago-de: 'Börkircher, Mikko und Thilo Gerhard Gamber. 2010. Simulationsunterstütztes
Wertstromdesign: Ansatz zur Steigerung des Wertschöpfungspotenzials in der Baustoffindustrie.
In: Integrationsaspekte der Simulation: Technik, Orgnisation und Personal,
Karlsruhe, 7. und 8. Oktober 2010 = Integration Aspects of Simulation: Equipment,
Organization and Personnell, Karlsruhe, 7th and 8th October 2010., hg. von
G. Zülch und Institut für Arbeitswissenschaft und Betriebsorganisation (IFAB),
405–412. Karlsruhe: KIT. doi: DOI: 10.5445/KSP/1000019635 , .'
din1505-2-1: 'Börkircher, Mikko ;
Gamber, Thilo Gerhard: Simulationsunterstütztes
Wertstromdesign: Ansatz zur Steigerung des Wertschöpfungspotenzials in der Baustoffindustrie.
In: Zülch, G. ; Institut
für Arbeitswissenschaft und Betriebsorganisation (IFAB) (Hrsg.): Integrationsaspekte
der Simulation: Technik, Orgnisation und Personal, Karlsruhe, 7. und 8. Oktober
2010 = Integration Aspects of Simulation: Equipment, Organization and Personnell,
Karlsruhe, 7th and 8th October 2010.. Karlsruhe : KIT, 2010, S. 405–412'
havard: 'M. Börkircher, T.G. Gamber, Simulationsunterstütztes Wertstromdesign: Ansatz
zur Steigerung des Wertschöpfungspotenzials in der Baustoffindustrie, in: G. Zülch,
Institut für Arbeitswissenschaft und Betriebsorganisation (IFAB) (Eds.), Integrationsaspekte
der Simulation: Technik, Orgnisation und Personal, Karlsruhe, 7. und 8. Oktober
2010 = Integration Aspects of Simulation: Equipment, Organization and Personnell,
Karlsruhe, 7th and 8th October 2010., KIT, Karlsruhe, 2010: pp. 405–412.'
ieee: 'M. Börkircher and T. G. Gamber, “Simulationsunterstütztes Wertstromdesign:
Ansatz zur Steigerung des Wertschöpfungspotenzials in der Baustoffindustrie,”
in Integrationsaspekte der Simulation: Technik, Orgnisation und Personal, Karlsruhe,
7. und 8. Oktober 2010 = Integration Aspects of Simulation: Equipment, Organization
and Personnell, Karlsruhe, 7th and 8th October 2010., Karlsruhe, 2010, no.
1, pp. 405–412.'
mla: 'Börkircher, Mikko, and Thilo Gerhard Gamber. “Simulationsunterstütztes Wertstromdesign:
Ansatz zur Steigerung des Wertschöpfungspotenzials in der Baustoffindustrie.”
Integrationsaspekte der Simulation: Technik, Orgnisation und Personal, Karlsruhe,
7. und 8. Oktober 2010 = Integration Aspects of Simulation: Equipment, Organization
and Personnell, Karlsruhe, 7th and 8th October 2010., edited by G. Zülch and
Institut für Arbeitswissenschaft und Betriebsorganisation (IFAB), no. 1, KIT,
2010, pp. 405–12, doi:
DOI: 10.5445/KSP/1000019635 .'
short: 'M. Börkircher, T.G. Gamber, in: G. Zülch, Institut für Arbeitswissenschaft
und Betriebsorganisation (IFAB) (Eds.), Integrationsaspekte der Simulation: Technik,
Orgnisation und Personal, Karlsruhe, 7. und 8. Oktober 2010 = Integration Aspects
of Simulation: Equipment, Organization and Personnell, Karlsruhe, 7th and 8th
October 2010., KIT, Karlsruhe, 2010, pp. 405–412.'
ufg: 'Börkircher, Mikko/Gamber, Thilo Gerhard (2010): Simulationsunterstütztes
Wertstromdesign: Ansatz zur Steigerung des Wertschöpfungspotenzials in der Baustoffindustrie,
in: G. Zülch/Institut für Arbeitswissenschaft und Betriebsorganisation (IFAB)
(Hgg.): Integrationsaspekte der Simulation: Technik, Orgnisation und Personal,
Karlsruhe, 7. und 8. Oktober 2010 = Integration Aspects of Simulation: Equipment,
Organization and Personnell, Karlsruhe, 7th and 8th October 2010., Karlsruhe,
S. 405–412.'
van: 'Börkircher M, Gamber TG. Simulationsunterstütztes Wertstromdesign: Ansatz
zur Steigerung des Wertschöpfungspotenzials in der Baustoffindustrie. In: Zülch
G, Institut für Arbeitswissenschaft und Betriebsorganisation (IFAB), editors.
Integrationsaspekte der Simulation: Technik, Orgnisation und Personal, Karlsruhe,
7 und 8 Oktober 2010 = Integration Aspects of Simulation: Equipment, Organization
and Personnell, Karlsruhe, 7th and 8th October 2010. Karlsruhe: KIT; 2010. p.
405–12.'
conference:
end_date: 2010-10-08
location: Karlsruhe
name: 'Integrationsaspekte der Simulation: Technik, Orgnisation und Personal'
start_date: 2010-10-07
corporate_editor:
- Institut für Arbeitswissenschaft und Betriebsorganisation (IFAB)
date_created: 2019-03-04T12:48:22Z
date_updated: 2023-03-15T13:50:04Z
doi: ' DOI: 10.5445/KSP/1000019635 '
editor:
- first_name: G.
full_name: Zülch, G.
last_name: Zülch
extern: '1'
issue: '1'
keyword:
- Simulation
- Automobilindustrie
- Digitale Fabrik
- Logistiksysteme
- Bauindustrie
language:
- iso: ger
main_file_link:
- open_access: '1'
url: https://publikationen.bibliothek.kit.edu/1000019635
oa: '1'
page: 405-412
place: Karlsruhe
publication: 'Integrationsaspekte der Simulation: Technik, Orgnisation und Personal,
Karlsruhe, 7. und 8. Oktober 2010 = Integration Aspects of Simulation: Equipment,
Organization and Personnell, Karlsruhe, 7th and 8th October 2010.'
publication_identifier:
isbn:
- 978-3-86644-558-1
publication_status: published
publisher: KIT
status: public
title: 'Simulationsunterstütztes Wertstromdesign: Ansatz zur Steigerung des Wertschöpfungspotenzials
in der Baustoffindustrie'
type: conference
user_id: '74004'
year: 2010
...
---
_id: '486'
abstract:
- lang: eng
text: Growing market demands on enterprises and the resulting challenges for their
organization have been discussed for many years now. The flexibilty and mutability
of an enterprise are thereby considered as a significant factor for success.
author:
- first_name: Gert
full_name: Zülch, Gert
last_name: Zülch
- first_name: Thilo Gerhard
full_name: Gamber, Thilo Gerhard
id: '71451'
last_name: Gamber
- first_name: Patricia
full_name: Stock, Patricia
last_name: Stock
citation:
ama: 'Zülch G, Gamber TG, Stock P. Methodology for the Analysis of Simulation-Based
Decision-Making in the Manufacturing Area. In: Olhager J, Persson F, eds. Advances
in Production Management Systems. New York: Springer; 2007:337-344.'
apa: 'Zülch, G., Gamber, T. G., & Stock, P. (2007). Methodology for the Analysis
of Simulation-Based Decision-Making in the Manufacturing Area. In J. Olhager &
F. Persson (Eds.), Advances in Production Management Systems (pp. 337–344).
New York: Springer.'
bjps: 'Zülch G, Gamber TG and Stock P (2007) Methodology for the Analysis
of Simulation-Based Decision-Making in the Manufacturing Area. In Olhager J and
Persson F (eds), Advances in Production Management Systems. New York: Springer,
pp. 337–344.'
chicago: 'Zülch, Gert, Thilo Gerhard Gamber, and Patricia Stock. “Methodology for
the Analysis of Simulation-Based Decision-Making in the Manufacturing Area.” In
Advances in Production Management Systems, edited by Jan Olhager and Fredrik
Persson, 337–44. New York: Springer, 2007.'
chicago-de: 'Zülch, Gert, Thilo Gerhard Gamber und Patricia Stock. 2007. Methodology
for the Analysis of Simulation-Based Decision-Making in the Manufacturing Area.
In: Advances in Production Management Systems, hg. von Jan Olhager und
Fredrik Persson, 337–344. New York: Springer.'
din1505-2-1: 'Zülch, Gert ; Gamber, Thilo Gerhard ; Stock,
Patricia: Methodology for the Analysis of Simulation-Based Decision-Making
in the Manufacturing Area. In: Olhager,
J. ; Persson, F. (Hrsg.):
Advances in Production Management Systems. New York : Springer, 2007, S. 337–344'
havard: 'G. Zülch, T.G. Gamber, P. Stock, Methodology for the Analysis of Simulation-Based
Decision-Making in the Manufacturing Area, in: J. Olhager, F. Persson (Eds.),
Advances in Production Management Systems, Springer, New York, 2007: pp. 337–344.'
ieee: G. Zülch, T. G. Gamber, and P. Stock, “Methodology for the Analysis of Simulation-Based
Decision-Making in the Manufacturing Area,” in Advances in Production Management
Systems, Linköping, 2007, pp. 337–344.
mla: Zülch, Gert, et al. “Methodology for the Analysis of Simulation-Based Decision-Making
in the Manufacturing Area.” Advances in Production Management Systems,
edited by Jan Olhager and Fredrik Persson, Springer, 2007, pp. 337–44.
short: 'G. Zülch, T.G. Gamber, P. Stock, in: J. Olhager, F. Persson (Eds.), Advances
in Production Management Systems, Springer, New York, 2007, pp. 337–344.'
ufg: 'Zülch, Gert et. al. (2007): Methodology for the Analysis of Simulation-Based
Decision-Making in the Manufacturing Area, in: Jan Olhager/Fredrik Persson (Hgg.):
Advances in Production Management Systems, New York, S. 337–344.'
van: 'Zülch G, Gamber TG, Stock P. Methodology for the Analysis of Simulation-Based
Decision-Making in the Manufacturing Area. In: Olhager J, Persson F, editors.
Advances in Production Management Systems. New York: Springer; 2007. p. 337–44.'
conference:
end_date: 2007-09-19
location: Linköping
name: International IFIP TC 5, WG 5.7 Conference on Advances in Production Management
Systems (APMS 2007)
start_date: 2007-09-17
date_created: 2019-01-30T07:51:48Z
date_updated: 2023-03-15T13:49:56Z
editor:
- first_name: Jan
full_name: Olhager, Jan
last_name: Olhager
- first_name: Fredrik
full_name: Persson, Fredrik
last_name: Persson
extern: '1'
keyword:
- production planning and control
- decision-making system
- personnel-oriented simulation
language:
- iso: eng
page: 337-344
place: New York
publication: Advances in Production Management Systems
publication_identifier:
isbn:
- 978-0-387-74157-4
publication_status: published
publisher: Springer
status: public
title: Methodology for the Analysis of Simulation-Based Decision-Making in the Manufacturing
Area
type: conference
user_id: '74004'
year: 2007
...