---
_id: '13678'
abstract:
- lang: eng
text: The previous methodology for optimizing CO2 emissions and electricity costs
in industrial applications is extended by integrating dynamic load shifting with
battery energy storage. Building on earlier work that employed Mixed-Integer Linear
Programming (MILP) to manage a stationary battery based on real-time electricity
prices and CO2 intensity signals, two industrial machines and one electric vehicle
(EV) are now incorporated as additional shiftable loads. These new elements introduce
further operational constraints while enhancing energy management flexibility.
The framework employs an adjustable weighting factor λ to balance environmental
impact and cost, and comparative analyses across three scenarios—battery-only,
load-shifting-only, and combined—demonstrate nearly additive CO2 reductions alongside
non-additive cost improvements, underscoring the synergistic potential for environmental
benefits despite diminishing cost returns. Moreover, validation against dynamic
programming confirms the MILP approach’s accuracy and computational efficiency.
author:
- first_name: Seyed Davood
full_name: Mousavi, Seyed Davood
id: '79148'
last_name: Mousavi
- first_name: Thomas
full_name: Schulte, Thomas
id: '46242'
last_name: Schulte
citation:
ama: Mousavi SD, Schulte T. Enhanced Dynamic Optimization for CO2 Reduction and
Cost Savings through Load Shifting in Smart Factories. (University of Buner,
Pakistan; Altinbas University, Türkiye, ICECCE, eds.). IEEE; 2026. doi:10.1109/icecet63943.2025.11472530
apa: Mousavi, S. D., & Schulte, T. (2026). Enhanced Dynamic Optimization for
CO2 Reduction and Cost Savings through Load Shifting in Smart Factories. In University
of Buner, Pakistan; Altinbas University, Türkiye & ICECCE (Eds.), 2025
5th International Conference on Electrical, Computer and Energy Technologies (ICECET).
IEEE. https://doi.org/10.1109/icecet63943.2025.11472530
bjps: 'Mousavi SD and Schulte T (2026) Enhanced Dynamic Optimization for
CO2 Reduction and Cost Savings through Load Shifting in Smart Factories, University
of Buner, Pakistan; Altinbas University, Türkiye and ICECCE (eds). [Piscataway,
NJ]: IEEE.'
chicago: 'Mousavi, Seyed Davood, and Thomas Schulte. Enhanced Dynamic Optimization
for CO2 Reduction and Cost Savings through Load Shifting in Smart Factories.
Edited by University of Buner, Pakistan; Altinbas University, Türkiye and ICECCE.
2025 5th International Conference on Electrical, Computer and Energy Technologies
(ICECET). [Piscataway, NJ]: IEEE, 2026. https://doi.org/10.1109/icecet63943.2025.11472530.'
chicago-de: 'Mousavi, Seyed Davood und Thomas Schulte. 2026. Enhanced Dynamic
Optimization for CO2 Reduction and Cost Savings through Load Shifting in Smart
Factories. Hg. von University of Buner, Pakistan; Altinbas University, Türkiye
und ICECCE. 2025 5th International Conference on Electrical, Computer and Energy
Technologies (ICECET). [Piscataway, NJ]: IEEE. doi:10.1109/icecet63943.2025.11472530,
.'
din1505-2-1: 'Mousavi, Seyed Davood
; Schulte, Thomas ; University
of Buner, Pakistan; Altinbas University, Türkiye ; ICECCE
(Hrsg.): Enhanced Dynamic Optimization for CO2 Reduction and Cost Savings through
Load Shifting in Smart Factories. [Piscataway, NJ] : IEEE, 2026'
havard: S.D. Mousavi, T. Schulte, Enhanced Dynamic Optimization for CO2 Reduction
and Cost Savings through Load Shifting in Smart Factories, IEEE, [Piscataway,
NJ], 2026.
ieee: 'S. D. Mousavi and T. Schulte, Enhanced Dynamic Optimization for CO2 Reduction
and Cost Savings through Load Shifting in Smart Factories. [Piscataway, NJ]:
IEEE, 2026. doi: 10.1109/icecet63943.2025.11472530.'
mla: Mousavi, Seyed Davood, and Thomas Schulte. “Enhanced Dynamic Optimization for
CO2 Reduction and Cost Savings through Load Shifting in Smart Factories.” 2025
5th International Conference on Electrical, Computer and Energy Technologies (ICECET),
edited by University of Buner, Pakistan; Altinbas University, Türkiye and ICECCE,
IEEE, 2026, https://doi.org/10.1109/icecet63943.2025.11472530.
short: S.D. Mousavi, T. Schulte, Enhanced Dynamic Optimization for CO2 Reduction
and Cost Savings through Load Shifting in Smart Factories, IEEE, [Piscataway,
NJ], 2026.
ufg: 'Mousavi, Seyed Davood/Schulte, Thomas: Enhanced Dynamic Optimization
for CO2 Reduction and Cost Savings through Load Shifting in Smart Factories, hg.
von University of Buner, Pakistan; Altinbas University, Türkiye, ICECCE, [Piscataway,
NJ] 2026.'
van: 'Mousavi SD, Schulte T. Enhanced Dynamic Optimization for CO2 Reduction and
Cost Savings through Load Shifting in Smart Factories. University of Buner, Pakistan;
Altinbas University, Türkiye, ICECCE, editors. 2025 5th International Conference
on Electrical, Computer and Energy Technologies (ICECET). [Piscataway, NJ]: IEEE;
2026.'
conference:
end_date: 2025-07-06
location: 'Paris, France '
name: 5th International Conference on Electrical, Computer and Energy Technologies
(ICECET)
start_date: 2025-07-03
corporate_editor:
- University of Buner, Pakistan; Altinbas University, Türkiye
- ICECCE
date_created: 2026-04-10T07:15:51Z
date_updated: 2026-04-13T09:32:58Z
department:
- _id: DEP6020
- _id: DEP5022
doi: 10.1109/icecet63943.2025.11472530
keyword:
- Feeds
- Antennas
- System-on-chip
- Application specific integrated circuits
- Life cycle assessment
- Product lifecycle management
- Radio access networks
- Regional area networks
- Smart devices
- OWL
language:
- iso: eng
place: '[Piscataway, NJ]'
publication: 2025 5th International Conference on Electrical, Computer and Energy
Technologies (ICECET)
publication_identifier:
eisbn:
- 979-8-3315-3559-9
publication_status: published
publisher: IEEE
status: public
title: Enhanced Dynamic Optimization for CO2 Reduction and Cost Savings through Load
Shifting in Smart Factories
type: conference_editor_article
user_id: '83781'
year: '2026'
...
---
_id: '13706'
abstract:
- lang: eng
text: Urban Nature-based Solutions (NBS) are hypothesized to play an important role
in promoting health, but most of the evidence is cross-sectional. This study aims
to examine the effects of an integrated urban intervention with NBS at its core,
implemented in the Nantes Nord district on residents' physical activity, social
activity, environmental quality of life and social network as well as self-rated
health and mental health. Analysing 902 observations from 2 datasets, pre- and
post-intervention, we categorized 802 participants within Nantes Nord as the treatment
group and 100 from other districts as the control group. We used Propensity Score
Matching to adjust for selection bias in the dataset and Difference-in-Differences
analysis to evaluate changes in physical activity, socializing activities, social
networks, environmental quality of life, as well as self-rated health and mental
health outcomes. Our results indicate that the urban tranformation with NBS at
its core was associated with a significant increase in physical activity levels
and to some extent in social ties. However, no immediate improvements were noticeable
in socializing activities, environmental quality of life, or health outcomes,
suggesting a latency in the broader effects of such interventions. This study
underscores the immediate effects of the integrated NBS intervention on physical
activity as a precursor to potentially more significant health benefits, which
should be followed up with a more mid-to-long-term evaluation of such NBS interventions.
Our findings advocate for the integration of connected green space corridors in
urban planning to facilitate active lifestyles as sustainable commitments by local
authorities and stakeholders.
author:
- first_name: Marcel
full_name: Cardinali, Marcel
id: '58462'
last_name: Cardinali
orcid: 0000-0002-8841-9345
- first_name: Ghozlane
full_name: Fleury-Bahi, Ghozlane
last_name: Fleury-Bahi
- first_name: Arnaud
full_name: Sapin, Arnaud
last_name: Sapin
- first_name: Philippe
full_name: Bodénan, Philippe
last_name: Bodénan
- first_name: Beatrice
full_name: Bechet, Beatrice
last_name: Bechet
- first_name: Milena Tasheva
full_name: Petrova, Milena Tasheva
last_name: Petrova
- first_name: Angel
full_name: Burov, Angel
last_name: Burov
- first_name: Guido
full_name: Ferilli, Guido
last_name: Ferilli
citation:
ama: 'Cardinali M, Fleury-Bahi G, Sapin A, et al. Evaluation of an Urban Nature-Based
Solutions Intervention on Health-Related Indicators: A Propensity Score Matching
and Difference-in- Differences Study in Nantes Nord. Quick And Easy Journal
Title. Published online 2026:In Press, Journal Pre-proof. doi:https://doi.org/10.1016/j.ufug.2026.129465'
apa: 'Cardinali, M., Fleury-Bahi, G., Sapin, A., Bodénan, P., Bechet, B., Petrova,
M. T., Burov, A., & Ferilli, G. (2026). Evaluation of an Urban Nature-Based
Solutions Intervention on Health-Related Indicators: A Propensity Score Matching
and Difference-in- Differences Study in Nantes Nord. Quick And Easy Journal
Title, In Press, Journal Pre-proof. https://doi.org/10.1016/j.ufug.2026.129465'
bjps: 'Cardinali M et al. (2026) Evaluation of an Urban Nature-Based
Solutions Intervention on Health-Related Indicators: A Propensity Score Matching
and Difference-in- Differences Study in Nantes Nord. Quick And Easy Journal
Title In Press, Journal Pre-proof.'
chicago: 'Cardinali, Marcel, Ghozlane Fleury-Bahi, Arnaud Sapin, Philippe Bodénan,
Beatrice Bechet, Milena Tasheva Petrova, Angel Burov, and Guido Ferilli. “Evaluation
of an Urban Nature-Based Solutions Intervention on Health-Related Indicators:
A Propensity Score Matching and Difference-in- Differences Study in Nantes Nord.”
Quick And Easy Journal Title, 2026, In Press, Journal Pre-proof. https://doi.org/10.1016/j.ufug.2026.129465.'
chicago-de: 'Cardinali, Marcel, Ghozlane Fleury-Bahi, Arnaud Sapin, Philippe Bodénan,
Beatrice Bechet, Milena Tasheva Petrova, Angel Burov und Guido Ferilli. 2026.
Evaluation of an Urban Nature-Based Solutions Intervention on Health-Related Indicators:
A Propensity Score Matching and Difference-in- Differences Study in Nantes Nord.
Quick And Easy Journal Title: In Press, Journal Pre-proof. doi:https://doi.org/10.1016/j.ufug.2026.129465,
.'
din1505-2-1: 'Cardinali, Marcel ;
Fleury-Bahi, Ghozlane ; Sapin,
Arnaud ; Bodénan, Philippe
; Bechet, Beatrice ; Petrova,
Milena Tasheva ; Burov, Angel
; Ferilli, Guido: Evaluation of
an Urban Nature-Based Solutions Intervention on Health-Related Indicators: A Propensity
Score Matching and Difference-in- Differences Study in Nantes Nord. In: Quick
And Easy Journal Title. [Amsterdam] , Elsevier (2026), S. In Press, Journal
Pre-proof'
havard: 'M. Cardinali, G. Fleury-Bahi, A. Sapin, P. Bodénan, B. Bechet, M.T. Petrova,
A. Burov, G. Ferilli, Evaluation of an Urban Nature-Based Solutions Intervention
on Health-Related Indicators: A Propensity Score Matching and Difference-in- Differences
Study in Nantes Nord, Quick And Easy Journal Title. (2026) In Press, Journal Pre-proof.'
ieee: 'M. Cardinali et al., “Evaluation of an Urban Nature-Based Solutions
Intervention on Health-Related Indicators: A Propensity Score Matching and Difference-in-
Differences Study in Nantes Nord,” Quick And Easy Journal Title, p. In
Press, Journal Pre-proof, 2026, doi: https://doi.org/10.1016/j.ufug.2026.129465.'
mla: 'Cardinali, Marcel, et al. “Evaluation of an Urban Nature-Based Solutions Intervention
on Health-Related Indicators: A Propensity Score Matching and Difference-in- Differences
Study in Nantes Nord.” Quick And Easy Journal Title, 2026, p. In Press,
Journal Pre-proof, https://doi.org/10.1016/j.ufug.2026.129465.'
short: M. Cardinali, G. Fleury-Bahi, A. Sapin, P. Bodénan, B. Bechet, M.T. Petrova,
A. Burov, G. Ferilli, Quick And Easy Journal Title (2026) In Press, Journal Pre-proof.
ufg: 'Cardinali, Marcel u. a.: Evaluation of an Urban Nature-Based Solutions
Intervention on Health-Related Indicators: A Propensity Score Matching and Difference-in-
Differences Study in Nantes Nord, in: Quick And Easy Journal Title (2026),
S. In Press, Journal Pre-proof.'
van: 'Cardinali M, Fleury-Bahi G, Sapin A, Bodénan P, Bechet B, Petrova MT, et al.
Evaluation of an Urban Nature-Based Solutions Intervention on Health-Related Indicators:
A Propensity Score Matching and Difference-in- Differences Study in Nantes Nord.
Quick And Easy Journal Title. 2026;In Press, Journal Pre-proof.'
date_created: 2026-04-24T10:43:03Z
date_updated: 2026-06-03T08:41:43Z
department:
- _id: DEP1055
- _id: DEP1600
doi: https://doi.org/10.1016/j.ufug.2026.129465
has_accepted_license: '1'
keyword:
- NBS
- green space
- Health
- urban transformation
- Impact Assessment
- Propensity
- Score Matching
language:
- iso: eng
page: In Press, Journal Pre-proof
place: '[Amsterdam] '
publication: Quick And Easy Journal Title
publication_status: published
publisher: Elsevier
status: public
title: 'Evaluation of an Urban Nature-Based Solutions Intervention on Health-Related
Indicators: A Propensity Score Matching and Difference-in- Differences Study in
Nantes Nord'
type: industry_journal_article
user_id: '83781'
year: '2026'
...
---
_id: '12733'
abstract:
- lang: eng
text: Occupant satisfaction in office spaces is a critical factor influencing occupant’s
productivity, satisfaction and overall workplace experience. This systematic review
examines the methodologies and approaches used to assess occupant satisfaction
with office space design, identifying key evaluation tools and research trends.
The study explores the extent to which existing methodologies integrate environmental,
spatial and design factors to provide a comprehensive understanding of user experience.
Additionally, it highlights the limitations in current assessment tools, including
the lack of standardised frameworks for capturing occupant feedback at different
stages of the design process. The findings suggest a growing shift towards data-driven
and real-time feedback mechanisms to enhance workplace adaptability. By synthesising
existing research, this review aims to provide insights for designers, facility
managers and policymakers to refine evaluation methods and integrate occupant-centric
strategies into office space planning.
author:
- first_name: María Victoria
full_name: Dávalos Quevedo, María Victoria
last_name: Dávalos Quevedo
- first_name: Alessandra
full_name: Luna-Navarro, Alessandra
last_name: Luna-Navarro
- first_name: Uta
full_name: Pottgiesser, Uta
id: '27166'
last_name: Pottgiesser
orcid: 0000-0002-8594-3168
- first_name: Ulrich
full_name: Blum, Ulrich
last_name: Blum
citation:
ama: 'Dávalos Quevedo MV, Luna-Navarro A, Pottgiesser U, Blum U. Methods and approaches
for evaluating occupant satisfaction with office space design: a systematic review.
Ergonomics. Published online 2025:1-21. doi:10.1080/00140139.2025.2480271'
apa: 'Dávalos Quevedo, M. V., Luna-Navarro, A., Pottgiesser, U., & Blum, U.
(2025). Methods and approaches for evaluating occupant satisfaction with office
space design: a systematic review. Ergonomics, 1–21. https://doi.org/10.1080/00140139.2025.2480271'
bjps: 'Dávalos Quevedo MV et al. (2025) Methods and Approaches for
Evaluating Occupant Satisfaction with Office Space Design: A Systematic Review.
Ergonomics 1–21.'
chicago: 'Dávalos Quevedo, María Victoria, Alessandra Luna-Navarro, Uta Pottgiesser,
and Ulrich Blum. “Methods and Approaches for Evaluating Occupant Satisfaction
with Office Space Design: A Systematic Review.” Ergonomics, 2025, 1–21.
https://doi.org/10.1080/00140139.2025.2480271.'
chicago-de: 'Dávalos Quevedo, María Victoria, Alessandra Luna-Navarro, Uta Pottgiesser
und Ulrich Blum. 2025. Methods and approaches for evaluating occupant satisfaction
with office space design: a systematic review. Ergonomics: 1–21. doi:10.1080/00140139.2025.2480271,
.'
din1505-2-1: 'Dávalos Quevedo, María Victoria
; Luna-Navarro, Alessandra ; Pottgiesser, Uta ; Blum,
Ulrich: Methods and approaches for evaluating occupant satisfaction with
office space design: a systematic review. In: Ergonomics. London [u.a.]
, Taylor & Francis (2025), S. 1–21'
havard: 'M.V. Dávalos Quevedo, A. Luna-Navarro, U. Pottgiesser, U. Blum, Methods
and approaches for evaluating occupant satisfaction with office space design:
a systematic review, Ergonomics. (2025) 1–21.'
ieee: 'M. V. Dávalos Quevedo, A. Luna-Navarro, U. Pottgiesser, and U. Blum, “Methods
and approaches for evaluating occupant satisfaction with office space design:
a systematic review,” Ergonomics, pp. 1–21, 2025, doi: 10.1080/00140139.2025.2480271.'
mla: 'Dávalos Quevedo, María Victoria, et al. “Methods and Approaches for Evaluating
Occupant Satisfaction with Office Space Design: A Systematic Review.” Ergonomics,
2025, pp. 1–21, https://doi.org/10.1080/00140139.2025.2480271.'
short: M.V. Dávalos Quevedo, A. Luna-Navarro, U. Pottgiesser, U. Blum, Ergonomics
(2025) 1–21.
ufg: 'Dávalos Quevedo, María Victoria u. a.: Methods and approaches for evaluating
occupant satisfaction with office space design: a systematic review, in: Ergonomics
(2025), S. 1–21.'
van: 'Dávalos Quevedo MV, Luna-Navarro A, Pottgiesser U, Blum U. Methods and approaches
for evaluating occupant satisfaction with office space design: a systematic review.
Ergonomics. 2025;1–21.'
date_created: 2025-03-27T11:25:34Z
date_updated: 2025-03-28T07:41:27Z
department:
- _id: DEP1055
- _id: DEP1620
doi: 10.1080/00140139.2025.2480271
keyword:
- Occupant satisfaction assessment
- User-centered office design
- Workplace experience
- office environment evaluation
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.tandfonline.com/doi/full/10.1080/00140139.2025.2480271
oa: '1'
page: 1-21
place: 'London [u.a.] '
publication: Ergonomics
publication_identifier:
eissn:
- 1366-5847
issn:
- 0014-0139
publication_status: published
publisher: Taylor & Francis
quality_controlled: '1'
status: public
title: 'Methods and approaches for evaluating occupant satisfaction with office space
design: a systematic review'
type: scientific_journal_article
user_id: '83781'
year: '2025'
...
---
_id: '13253'
abstract:
- lang: eng
text: This study explores the transition from a linear to a circular economy in
the building and construction industry, focusing on the environmental impacts
of façade systems in office buildings. The linear „Take-Make-Dispose“ model contributes
significantly to resource consumption, waste generation, and CO2 emissions, with
the construction sector responsible for 35% of global waste. The EU‘s Circular
Economy Action Plan emphasizes designing products to minimize waste and retain
resources, highlighting the importance of end-of-life (EoL) considerations in
construction. Life Cycle Assessment (LCA) is employed to evaluate the environmental
impacts of design decisions, particularly for stick curtain wall systems, which
are widely used in office buildings. The research adopts a mixed methodology,
combining literature review and design process analysis, focusing on frame materials
(aluminum, steel, wood) and glass options. Three EoL scenarios—reuse, recycling,
and demolition—are assessed to determine their impact on embodied carbon. The
study is limited to office buildings in Germany, with a case study in Stuttgart,
due to the prevalence of stick systems in such structures. Preliminary findings
indicate that reuse scenarios generally have the lowest environmental impact,
though outcomes vary based on material combinations. By systematically analyzing
EoL scenarios, this research provides a framework for optimizing façade designs
to enhance sustainability, reduce waste, and promote circularity in real-world
construction projects.
author:
- first_name: Abdelrahman Walid Shawky Mahmoud
full_name: Badr, Abdelrahman Walid Shawky Mahmoud
id: '81781'
last_name: Badr
- first_name: Daniel
full_name: Arztmann, Daniel
id: '58805'
last_name: Arztmann
- first_name: Florian
full_name: Starz, Florian
last_name: Starz
- first_name: Carmen
full_name: Herrmann, Carmen
last_name: Herrmann
citation:
ama: 'Badr AWSM, Arztmann D, Starz F, Herrmann C. Circular Facade Design: The Importance
of end of life scenarios to reduce environmental Impact. DESIGN STRATEGIES :
SPECIAL ISSUE Impulses from teaching and research. 2025;2025(4):39-45.'
apa: 'Badr, A. W. S. M., Arztmann, D., Starz, F., & Herrmann, C. (2025). Circular
Facade Design: The Importance of end of life scenarios to reduce environmental
Impact. DESIGN STRATEGIES : SPECIAL ISSUE Impulses from Teaching and Research,
2025(4), 39–45.'
bjps: 'Badr AWSM et al. (2025) Circular Facade Design: The Importance
of End of Life Scenarios to Reduce Environmental Impact. DESIGN STRATEGIES :
SPECIAL ISSUE Impulses from teaching and research 2025, 39–45.'
chicago: 'Badr, Abdelrahman Walid Shawky Mahmoud, Daniel Arztmann, Florian Starz,
and Carmen Herrmann. “Circular Facade Design: The Importance of End of Life Scenarios
to Reduce Environmental Impact.” DESIGN STRATEGIES : SPECIAL ISSUE Impulses
from Teaching and Research 2025, no. 4 (2025): 39–45.'
chicago-de: 'Badr, Abdelrahman Walid Shawky Mahmoud, Daniel Arztmann, Florian Starz
und Carmen Herrmann. 2025. Circular Facade Design: The Importance of end of life
scenarios to reduce environmental Impact. DESIGN STRATEGIES : SPECIAL ISSUE
Impulses from teaching and research 2025, Nr. 4: 39–45.'
din1505-2-1: 'Badr, Abdelrahman Walid Shawky
Mahmoud ; Arztmann, Daniel
; Starz, Florian ; Herrmann,
Carmen: Circular Facade Design: The Importance of end of life scenarios
to reduce environmental Impact. In: DESIGN STRATEGIES : SPECIAL ISSUE Impulses
from teaching and research Bd. 2025. Detmold, Technische Hochschule Ostwestfalen-Lippe
(2025), Nr. 4, S. 39–45'
havard: 'A.W.S.M. Badr, D. Arztmann, F. Starz, C. Herrmann, Circular Facade Design:
The Importance of end of life scenarios to reduce environmental Impact, DESIGN
STRATEGIES : SPECIAL ISSUE Impulses from Teaching and Research. 2025 (2025) 39–45.'
ieee: 'A. W. S. M. Badr, D. Arztmann, F. Starz, and C. Herrmann, “Circular Facade
Design: The Importance of end of life scenarios to reduce environmental Impact,”
DESIGN STRATEGIES : SPECIAL ISSUE Impulses from teaching and research,
vol. 2025, no. 4, pp. 39–45, 2025.'
mla: 'Badr, Abdelrahman Walid Shawky Mahmoud, et al. “Circular Facade Design: The
Importance of End of Life Scenarios to Reduce Environmental Impact.” DESIGN
STRATEGIES : SPECIAL ISSUE Impulses from Teaching and Research, vol. 2025,
no. 4, 2025, pp. 39–45.'
short: 'A.W.S.M. Badr, D. Arztmann, F. Starz, C. Herrmann, DESIGN STRATEGIES : SPECIAL
ISSUE Impulses from Teaching and Research 2025 (2025) 39–45.'
ufg: 'Badr, Abdelrahman Walid Shawky Mahmoud u. a.: Circular Facade Design:
The Importance of end of life scenarios to reduce environmental Impact, in: DESIGN
STRATEGIES : SPECIAL ISSUE Impulses from teaching and research 2025 (2025),
H. 4, S. 39–45.'
van: 'Badr AWSM, Arztmann D, Starz F, Herrmann C. Circular Facade Design: The Importance
of end of life scenarios to reduce environmental Impact. DESIGN STRATEGIES :
SPECIAL ISSUE Impulses from teaching and research. 2025;2025(4):39–45.'
date_created: 2025-10-13T11:07:27Z
date_updated: 2026-01-23T09:42:42Z
ddc:
- '720'
department:
- _id: DEP1034
- _id: DEP1055
has_accepted_license: '1'
intvolume: ' 2025'
issue: '4'
keyword:
- circularity
- end of life scenarios
- embodied carbon
- stick systems
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.yumpu.com/en/document/read/70662685/design-strategies-impulse-sustainable-facades-vol-4/39
oa: '1'
page: 39-45
place: Detmold
publication: 'DESIGN STRATEGIES : SPECIAL ISSUE Impulses from teaching and research'
publication_identifier:
eissn:
- 2943-4467
issn:
- 2943-4459
publication_status: published
publisher: Technische Hochschule Ostwestfalen-Lippe
status: public
title: 'Circular Facade Design: The Importance of end of life scenarios to reduce
environmental Impact'
type: scientific_journal_article
user_id: '83781'
volume: 2025
year: '2025'
...
---
_id: '13651'
abstract:
- lang: eng
text: "Microbial food safety is the master key for reducing illness caused by the
consumption of foodstuffs. This demonstration therefore aims to use non-pathogenic
surrogates to draw conclusions whether vegan ready-to-eat model food serves as
a base for growth of pathogenic Escherichia coli and Listeria monocytogenes in
vegan ready-to-eat meat substitute in case of a potential contamination, causing
a reduction of food safety.\r\nPackages of ready-to-eat vegan meat substitutes
were inoculated with certain level of non-pathogenic L. innocua and E. coli and
incubated at varying environmental conditions before they were examined for changes
in the physico-chemical properties.\r\nThe observed ability of the microbes to
grow in the snacks may cause a reduction in food safety. This demonstration shows
that these ready-to-eat-snacks may cause a reduction in food safety if the product
studied is contaminated."
article_number: '1'
article_type: original
author:
- first_name: Carolin
full_name: Müller, Carolin
id: '67085'
last_name: Müller
- first_name: Jarmo
full_name: Alarinta, Jarmo
last_name: Alarinta
- first_name: Björn
full_name: Frahm, Björn
id: '45666'
last_name: Frahm
- first_name: Gun
full_name: Wirtanen, Gun
last_name: Wirtanen
citation:
ama: Müller C, Alarinta J, Frahm B, Wirtanen G. Demonstration of Listeria innocua
and Escherichia coli growth in ready-to-eat vegan foods. SeAMK Journal.
2025;2(1).
apa: Müller, C., Alarinta, J., Frahm, B., & Wirtanen, G. (2025). Demonstration
of Listeria innocua and Escherichia coli growth in ready-to-eat vegan foods. SeAMK
Journal, 2(1), Article 1.
bjps: Müller C et al. (2025) Demonstration of Listeria Innocua and
Escherichia Coli Growth in Ready-to-Eat Vegan Foods. SeAMK Journal 2.
chicago: Müller, Carolin, Jarmo Alarinta, Björn Frahm, and Gun Wirtanen. “Demonstration
of Listeria Innocua and Escherichia Coli Growth in Ready-to-Eat Vegan Foods.”
SeAMK Journal 2, no. 1 (2025).
chicago-de: Müller, Carolin, Jarmo Alarinta, Björn Frahm und Gun Wirtanen. 2025.
Demonstration of Listeria innocua and Escherichia coli growth in ready-to-eat
vegan foods. SeAMK Journal 2, Nr. 1.
din1505-2-1: 'Müller, Carolin ; Alarinta, Jarmo ; Frahm,
Björn ; Wirtanen, Gun: Demonstration
of Listeria innocua and Escherichia coli growth in ready-to-eat vegan foods. In:
SeAMK Journal Bd. 2. SEINÄJOKI, SeAMK (2025), Nr. 1'
havard: C. Müller, J. Alarinta, B. Frahm, G. Wirtanen, Demonstration of Listeria
innocua and Escherichia coli growth in ready-to-eat vegan foods, SeAMK Journal.
2 (2025).
ieee: C. Müller, J. Alarinta, B. Frahm, and G. Wirtanen, “Demonstration of Listeria
innocua and Escherichia coli growth in ready-to-eat vegan foods,” SeAMK Journal,
vol. 2, no. 1, Art. no. 1, 2025.
mla: Müller, Carolin, et al. “Demonstration of Listeria Innocua and Escherichia
Coli Growth in Ready-to-Eat Vegan Foods.” SeAMK Journal, vol. 2, no. 1,
1, 2025.
short: C. Müller, J. Alarinta, B. Frahm, G. Wirtanen, SeAMK Journal 2 (2025).
ufg: 'Müller, Carolin u. a.: Demonstration of Listeria innocua and Escherichia
coli growth in ready-to-eat vegan foods, in: SeAMK Journal 2 (2025), H.
1.'
van: Müller C, Alarinta J, Frahm B, Wirtanen G. Demonstration of Listeria innocua
and Escherichia coli growth in ready-to-eat vegan foods. SeAMK Journal. 2025;2(1).
date_created: 2026-03-27T17:29:35Z
date_updated: 2026-04-08T13:41:35Z
department:
- _id: DEP4000
intvolume: ' 2'
issue: '1'
keyword:
- Vegan food
- Ready-to-eat food
- RTE
- Listeria innocua
- Escherichia coli
- food safety
- microbial spoilage
- shelf life study
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://urn.fi/URN:NBN:fi-fe2025040223221
oa: '1'
place: SEINÄJOKI
publication: SeAMK Journal
publication_identifier:
issn:
- 2984-1917
publication_status: published
publisher: SeAMK
quality_controlled: '1'
related_material:
link:
- relation: confirmation
url: https://lehti.seamk.fi/journal/demonstration-of-listeria-innocua-and-escherichia-coli-growth-in-ready-to-eat-vegan-foods/
status: public
title: Demonstration of Listeria innocua and Escherichia coli growth in ready-to-eat
vegan foods
type: scientific_journal_article
user_id: '83781'
volume: 2
year: '2025'
...
---
_id: '12274'
abstract:
- lang: eng
text: The Toothed Orchid, Neotinea tridentata, has been elected for Orchid of
the Year 2019 by the steering committees of the German Native Orchids Associations (Arbeitskreise
Heimische Orchideen Deutschlands, AHO) Etymology, characteristics and life cycle
as well as ecology and habitat of the species are specified. The range of the
species is described and a distribution map is presented for Germany. Threats
are discussed and methods of conservation management of the species are pointed
out. Finally possible consequences of climate change for the species are discussed
- lang: fre
text: L’orchis tridenté, Neotinea tridentata, a été élue orchidée de l‘année 2019
par les comités directeurs des associations allemandes d‘orchidées indigènes (Arbeitskreise
Heimische Orchideen Deutschlands, AHO) L‘étymologie, les caractéristiques et
le cycle de vie ainsi que l‘écologie et l‘habitat de cette espèce sont spécifiés.
L‘aire de répartition du taxon est décrite et une carte de répartition est présentée
pour l‘Allemagne. Les menaces sont discutées et les méthodes de gestion de la
conservation de l‘espèce sont soulignées. Enfin, les consé quences possibles du changement climatique
pour l‘espèce sont abordées.
author:
- first_name: Mathias
full_name: Lohr, Mathias
id: '22021'
last_name: Lohr
- first_name: Jutta
full_name: Haas, Jutta
last_name: Haas
citation:
ama: Lohr M, Haas J. L’orchidée tridentée, Neotinea tridentata. . L’Orchidophile.
2024;241:139-148.
apa: Lohr, M., & Haas, J. (2024). L’orchidée tridentée, Neotinea tridentata.
. L’Orchidophile, 241, 139–148.
bjps: Lohr M and Haas J (2024) L’orchidée Tridentée, Neotinea Tridentata.
. L’Orchidophile 241, 139–148.
chicago: 'Lohr, Mathias, and Jutta Haas. “L’orchidée Tridentée, Neotinea Tridentata.
.” L’Orchidophile 241 (2024): 139–48.'
chicago-de: 'Lohr, Mathias und Jutta Haas. 2024. L’orchidée tridentée, Neotinea
tridentata. . L’Orchidophile 241: 139–148.'
din1505-2-1: 'Lohr, Mathias ; Haas, Jutta: L’orchidée tridentée, Neotinea
tridentata. . In: L’Orchidophile Bd. 241, FFO (2024), S. 139–148'
havard: M. Lohr, J. Haas, L’orchidée tridentée, Neotinea tridentata. , L’Orchidophile.
241 (2024) 139–148.
ieee: M. Lohr and J. Haas, “L’orchidée tridentée, Neotinea tridentata. ,” L’Orchidophile,
vol. 241, pp. 139–148, 2024.
mla: Lohr, Mathias, and Jutta Haas. “L’orchidée Tridentée, Neotinea Tridentata.
.” L’Orchidophile, vol. 241, 2024, pp. 139–48.
short: M. Lohr, J. Haas, L’Orchidophile 241 (2024) 139–148.
ufg: 'Lohr, Mathias/Haas, Jutta: L’orchidée tridentée, Neotinea tridentata.
, in: L’Orchidophile 241 (2024), S. 139–148.'
van: Lohr M, Haas J. L’orchidée tridentée, Neotinea tridentata. . L’Orchidophile.
2024;241:139–48.
date_created: 2025-01-02T17:11:53Z
date_updated: 2025-01-07T07:47:04Z
ddc:
- '570'
department:
- _id: DEP1310
has_accepted_license: '1'
intvolume: ' 241'
keyword:
- Orchidaceae
- Neotinea tridentata
- orchidée de l’année 2019
- caractéristiques
- distribution
- cycle de vie
- gestion
- menaces
- conservation
- statut de protection
language:
- iso: eng
page: 139-148
publication: L’Orchidophile
publication_identifier:
issn:
- 2498-3713
- 0750-0386
publication_status: published
publisher: FFO
related_material:
link:
- relation: confirmation
url: https://www.researchgate.net/publication/387485714_L'orchidee_tridentee_Neotinea_tridentata
status: public
title: 'L’orchidée tridentée, Neotinea tridentata. '
type: industry_journal_article
user_id: '83781'
volume: 241
year: '2024'
...
---
_id: '12402'
abstract:
- lang: eng
text: In anaerobic technology, pH values are crucial for targeted volatile fatty
acid production. While pH dynamics can be modeled using the Anaerobic Digestion
Model No. 1 (ADM1), simulation results may be biased. To address this issue, the
pH prediction routine of Visual Water, a specialized water chemistry simulator,
was validated. Unlike ADM1, it accounts for ionic strength and activities while
also providing an automated uncertainty analysis. The analysis revealed Visual Water
simulations to better fit measured pH data from acidic solutions in a miniaturized
stirred-tank reactor.
author:
- first_name: Pascal
full_name: Kosse, Pascal
last_name: Kosse
- first_name: Tanja
full_name: Hernández Rodriguez, Tanja
id: '52466'
last_name: Hernández Rodriguez
- first_name: Björn
full_name: Frahm, Björn
id: '45666'
last_name: Frahm
- first_name: Manfred
full_name: Lübken, Manfred
last_name: Lübken
- first_name: Marc
full_name: Wichern, Marc
last_name: Wichern
citation:
ama: Kosse P, Hernández Rodriguez T, Frahm B, Lübken M, Wichern M. Comparative Analysis
of pH Prediction Routines in ADM1 and a Specialized Water Chemistry Simulator.
Chemie Ingenieur Technik. 2024;96(4):528-534. doi:10.1002/cite.202300188
apa: Kosse, P., Hernández Rodriguez, T., Frahm, B., Lübken, M., & Wichern, M.
(2024). Comparative Analysis of pH Prediction Routines in ADM1 and a Specialized
Water Chemistry Simulator. Chemie Ingenieur Technik, 96(4), 528–534.
https://doi.org/10.1002/cite.202300188
bjps: Kosse P et al. (2024) Comparative Analysis of PH Prediction
Routines in ADM1 and a Specialized Water Chemistry Simulator. Chemie Ingenieur
Technik 96, 528–534.
chicago: 'Kosse, Pascal, Tanja Hernández Rodriguez, Björn Frahm, Manfred Lübken,
and Marc Wichern. “Comparative Analysis of PH Prediction Routines in ADM1 and
a Specialized Water Chemistry Simulator.” Chemie Ingenieur Technik 96,
no. 4 (2024): 528–34. https://doi.org/10.1002/cite.202300188.'
chicago-de: 'Kosse, Pascal, Tanja Hernández Rodriguez, Björn Frahm, Manfred Lübken
und Marc Wichern. 2024. Comparative Analysis of pH Prediction Routines in ADM1
and a Specialized Water Chemistry Simulator. Chemie Ingenieur Technik 96,
Nr. 4: 528–534. doi:10.1002/cite.202300188,
.'
din1505-2-1: 'Kosse, Pascal ; Hernández Rodriguez, Tanja ; Frahm,
Björn ; Lübken, Manfred ;
Wichern, Marc: Comparative Analysis
of pH Prediction Routines in ADM1 and a Specialized Water Chemistry Simulator.
In: Chemie Ingenieur Technik Bd. 96. Weinheim, Wiley (2024), Nr. 4, S. 528–534'
havard: P. Kosse, T. Hernández Rodriguez, B. Frahm, M. Lübken, M. Wichern, Comparative
Analysis of pH Prediction Routines in ADM1 and a Specialized Water Chemistry Simulator,
Chemie Ingenieur Technik. 96 (2024) 528–534.
ieee: 'P. Kosse, T. Hernández Rodriguez, B. Frahm, M. Lübken, and M. Wichern, “Comparative
Analysis of pH Prediction Routines in ADM1 and a Specialized Water Chemistry Simulator,”
Chemie Ingenieur Technik, vol. 96, no. 4, pp. 528–534, 2024, doi: 10.1002/cite.202300188.'
mla: Kosse, Pascal, et al. “Comparative Analysis of PH Prediction Routines in ADM1
and a Specialized Water Chemistry Simulator.” Chemie Ingenieur Technik,
vol. 96, no. 4, 2024, pp. 528–34, https://doi.org/10.1002/cite.202300188.
short: P. Kosse, T. Hernández Rodriguez, B. Frahm, M. Lübken, M. Wichern, Chemie
Ingenieur Technik 96 (2024) 528–534.
ufg: 'Kosse, Pascal u. a.: Comparative Analysis of pH Prediction Routines
in ADM1 and a Specialized Water Chemistry Simulator, in: Chemie Ingenieur Technik
96 (2024), H. 4, S. 528–534.'
van: Kosse P, Hernández Rodriguez T, Frahm B, Lübken M, Wichern M. Comparative Analysis
of pH Prediction Routines in ADM1 and a Specialized Water Chemistry Simulator.
Chemie Ingenieur Technik. 2024;96(4):528–34.
date_created: 2025-01-29T13:49:16Z
date_updated: 2025-06-25T12:42:09Z
department:
- _id: DEP4000
doi: 10.1002/cite.202300188
external_id:
isi:
- '001169606600001'
intvolume: ' 96'
isi: '1'
issue: '4'
keyword:
- Anaerobic Digestion Model No. 1 (ADM1)
- Anaerobic technology
- pH simulation
- Uncertainty assessment
- Visual Water
language:
- iso: eng
page: 528-534
place: Weinheim
publication: Chemie Ingenieur Technik
publication_identifier:
eissn:
- 1522-2640
issn:
- 0009-286X
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Comparative Analysis of pH Prediction Routines in ADM1 and a Specialized Water
Chemistry Simulator
type: scientific_journal_article
user_id: '83781'
volume: 96
year: '2024'
...
---
_id: '12761'
abstract:
- lang: eng
text: For modern machines, factories and electric and autonomous vehicles, the importance
of vreliable electrical connectors cannot be overstated. With an increasing number
of connectors being used in machines, factories and vehicles, ensuring their reliability
is crucial for comfort and safety alike. One of the key indicators of reliability
is the lifetime of connectors. To evaluate the lifetime of electrical connectors,
a testing method and a model for calculating their lifetime based on the test
data were developed. The results from these tests were compared to failure analysis
data from long-term field operations. The findings indicate that the laboratory
tests can accurately reproduce the main failures observed in the field. However,
such lifetime tests can be time- and labor-intensive. To address this challenge,
a data-driven method is proposed that predicts the lifetime of electrical connectors
using statistical analysis of electrical contact resistance data collected from
short-term tests. The predictions from this method were compared to actual results
obtained from long-term tests. A strong correlation was observed between the contact
resistance development in short-term tests and the number of failures in later
stages of testing. Thus, apart from predicting the lifetime of connectors, this
method can also be applied for failure prognosis in real-time operations.
author:
- first_name: Jian
full_name: Song, Jian
id: '5297'
last_name: Song
- first_name: Abhay Rammurti
full_name: Shukla, Abhay Rammurti
id: '74188'
last_name: Shukla
- first_name: Roman
full_name: Probst, Roman
id: '69156'
last_name: Probst
citation:
ama: Song J, Shukla AR, Probst R. The State of Health of Electrical Connectors.
Machines. 2024;7(12):474. doi:https://doi.org/10.3390/machines12070474
apa: Song, J., Shukla, A. R., & Probst, R. (2024). The State of Health of Electrical
Connectors. Machines, 7(12), 474. https://doi.org/10.3390/machines12070474
bjps: Song J, Shukla AR and Probst R (2024) The State of Health of Electrical
Connectors. Machines 7, 474.
chicago: 'Song, Jian, Abhay Rammurti Shukla, and Roman Probst. “The State of Health
of Electrical Connectors.” Machines 7, no. 12 (2024): 474. https://doi.org/10.3390/machines12070474.'
chicago-de: 'Song, Jian, Abhay Rammurti Shukla und Roman Probst. 2024. The State
of Health of Electrical Connectors. Machines 7, Nr. 12: 474. doi:https://doi.org/10.3390/machines12070474,
.'
din1505-2-1: 'Song, Jian ; Shukla,
Abhay Rammurti ; Probst, Roman:
The State of Health of Electrical Connectors. In: Machines Bd. 7. Basel,
MDPI (2024), Nr. 12, S. 474'
havard: J. Song, A.R. Shukla, R. Probst, The State of Health of Electrical Connectors,
Machines. 7 (2024) 474.
ieee: 'J. Song, A. R. Shukla, and R. Probst, “The State of Health of Electrical
Connectors,” Machines, vol. 7, no. 12, p. 474, 2024, doi: https://doi.org/10.3390/machines12070474.'
mla: Song, Jian, et al. “The State of Health of Electrical Connectors.” Machines,
vol. 7, no. 12, 2024, p. 474, https://doi.org/10.3390/machines12070474.
short: J. Song, A.R. Shukla, R. Probst, Machines 7 (2024) 474.
ufg: 'Song, Jian/Shukla, Abhay Rammurti/Probst, Roman: The State of Health
of Electrical Connectors, in: Machines 7 (2024), H. 12, S. 474.'
van: Song J, Shukla AR, Probst R. The State of Health of Electrical Connectors.
Machines. 2024;7(12):474.
date_created: 2025-04-04T09:23:10Z
date_updated: 2025-06-25T13:03:28Z
department:
- _id: DEP6012
doi: https://doi.org/10.3390/machines12070474
external_id:
isi:
- '001277040200001'
intvolume: ' 7'
isi: '1'
issue: '12'
keyword:
- electrical connectors
- accelerated life testing
- statistical model
- lifetime prognosis
- reliability
- state of health
language:
- iso: eng
page: '474'
place: Basel
publication: Machines
publication_identifier:
eissn:
- '2075-1702 '
publication_status: published
publisher: MDPI
quality_controlled: '1'
status: public
title: The State of Health of Electrical Connectors
type: scientific_journal_article
user_id: '83781'
volume: 7
year: '2024'
...
---
_id: '12788'
abstract:
- lang: eng
text: The product environmental footprint (PEF) is one of two life cycle assessment
methods from the European Commission. With their published recommendation on environmental
footprint methods, the European Commission provides a framework to assess the
PEF for every product in a company. Since there is a high probability that the
PEF will be mandatory for companies shortly, it is crucial that this recommendation
guides companies and mainly technical employees through all phases of the PEF
and enables them to execute a PEF study correctly. Therefore, this paper aims
to analyze the process of calculating a PEF for a product critically. A PEF study
is conducted on a smart luminaire with the software program OpenLCA. The use case
concludes that many aspects of the PEF still need to be clarified. Especially
the calculation methods behind every impact category need to be more transparent.
Further, a comparison of the use case with a provided tutorial from OpenLCA is
made. The comparison shows that no information is available on how to model the
end-of-life and the use stages, which are mandatory in a PEF study. (c) 2023 The
Authors. Published by ELSEVIER B.V.
author:
- first_name: Viktoria
full_name: Mordaschew, Viktoria
id: '79005'
last_name: Mordaschew
- first_name: Sven
full_name: Tackenberg, Sven
id: '71470'
last_name: Tackenberg
citation:
ama: Mordaschew V, Tackenberg S. The Product Environmental Footprint – A Critical
Review. Vol 232. (Longo F, Shen W, Padovano A, eds.). Elsevier BV; 2024:493-503.
doi:10.1016/j.procs.2024.01.049
apa: Mordaschew, V., & Tackenberg, S. (2024). The Product Environmental Footprint
– A Critical Review. In F. Longo, W. Shen, & A. Padovano (Eds.), 5th International
Conference on Industry 4.0 and Smart Manufacturing (ISM) (Vol. 232, pp. 493–503).
Elsevier BV. https://doi.org/10.1016/j.procs.2024.01.049
bjps: 'Mordaschew V and Tackenberg S (2024) The Product Environmental
Footprint – A Critical Review, Longo F, Shen W and Padovano A (eds). Amsterdam:
Elsevier BV.'
chicago: 'Mordaschew, Viktoria, and Sven Tackenberg. The Product Environmental
Footprint – A Critical Review. Edited by F. Longo, W. Shen, and A. Padovano.
5th International Conference on Industry 4.0 and Smart Manufacturing (ISM).
Vol. 232. Procedia Computer Science. Amsterdam: Elsevier BV, 2024. https://doi.org/10.1016/j.procs.2024.01.049.'
chicago-de: 'Mordaschew, Viktoria und Sven Tackenberg. 2024. The Product Environmental
Footprint – A Critical Review. Hg. von F. Longo, W. Shen, und A. Padovano.
5th International Conference on Industry 4.0 and Smart Manufacturing (ISM).
Bd. 232. Procedia Computer Science. Amsterdam: Elsevier BV. doi:10.1016/j.procs.2024.01.049,
.'
din1505-2-1: 'Mordaschew, Viktoria
; Tackenberg, Sven ; Longo,
F. ; Shen, W. ; Padovano,
A. (Hrsg.): The Product Environmental Footprint – A Critical Review,
Procedia Computer Science. Bd. 232. Amsterdam : Elsevier BV, 2024'
havard: V. Mordaschew, S. Tackenberg, The Product Environmental Footprint – A Critical
Review, Elsevier BV, Amsterdam, 2024.
ieee: 'V. Mordaschew and S. Tackenberg, The Product Environmental Footprint –
A Critical Review, vol. 232. Amsterdam: Elsevier BV, 2024, pp. 493–503. doi:
10.1016/j.procs.2024.01.049.'
mla: Mordaschew, Viktoria, and Sven Tackenberg. “The Product Environmental Footprint
– A Critical Review.” 5th International Conference on Industry 4.0 and Smart
Manufacturing (ISM), edited by F. Longo et al., vol. 232, Elsevier BV, 2024,
pp. 493–503, https://doi.org/10.1016/j.procs.2024.01.049.
short: V. Mordaschew, S. Tackenberg, The Product Environmental Footprint – A Critical
Review, Elsevier BV, Amsterdam, 2024.
ufg: 'Mordaschew, Viktoria/Tackenberg, Sven: The Product Environmental Footprint
– A Critical Review, Bd. 232, hg. von Longo, F./Shen, W./Padovano, A., Amsterdam
2024 (Procedia Computer Science).'
van: 'Mordaschew V, Tackenberg S. The Product Environmental Footprint – A Critical
Review. Longo F, Shen W, Padovano A, editors. 5th International Conference on
Industry 4.0 and Smart Manufacturing (ISM). Amsterdam: Elsevier BV; 2024. (Procedia
Computer Science; vol. 232).'
conference:
end_date: 2023-11-24
location: Lisbon, PORTUGAL
name: 5th International Conference on Industry 4.0 and Smart Manufacturing (ISM)
start_date: 2023-11-22
date_created: 2025-04-15T08:01:11Z
date_updated: 2025-06-25T12:43:49Z
department:
- _id: DEP7020
doi: 10.1016/j.procs.2024.01.049
editor:
- first_name: F.
full_name: Longo, F.
last_name: Longo
- first_name: W.
full_name: Shen, W.
last_name: Shen
- first_name: A.
full_name: Padovano, A.
last_name: Padovano
intvolume: ' 232'
keyword:
- Product Environmental Footprint
- Life Cycle Assessment
- Sustainability
- Cyber-physical Systems
language:
- iso: eng
page: 493-503
place: Amsterdam
publication: 5th International Conference on Industry 4.0 and Smart Manufacturing
(ISM)
publication_identifier:
issn:
- 1877-0509
publication_status: published
publisher: Elsevier BV
series_title: Procedia Computer Science
status: public
title: The Product Environmental Footprint – A Critical Review
type: conference_editor_article
user_id: '83781'
volume: 232
year: '2024'
...
---
_id: '12831'
abstract:
- lang: eng
text: The overall Industry 4.0 developments and the highly dynamic threat landscape
enhance the need for continuous security engineering of industrial components,
modules, and systems. Security risk assessments play a major role to ensure a
secure operation of Industrial Automation and Control Systems (IACSs) but are
mostly neglected due to missing resources and a lack of human experts for the
sophisticated manual tasks. Therefore, a method for information and process modelling
regarding the automation of security risk assessments has been previously designed,
but not yet evaluated. This work in progress begins the evaluation of the automated
security risk assessment concept by investigating the related work and identifying
the main deficits. The results include a requirements analysis for the verification
and an outlook towards future evaluation aspects.
author:
- first_name: Marco
full_name: Ehrlich, Marco
id: '61562'
last_name: Ehrlich
- first_name: Georg
full_name: Lukas, Georg
last_name: Lukas
- first_name: Henning
full_name: Trsek, Henning
id: '1486'
last_name: Trsek
orcid: 0000-0002-0133-0656
- first_name: Jürgen
full_name: Jasperneite, Jürgen
id: '1899'
last_name: Jasperneite
- first_name: Wolfgang
full_name: Kastner, Wolfgang
last_name: Kastner
- first_name: Christian
full_name: Diedrich, Christian
last_name: Diedrich
citation:
ama: Ehrlich M, Lukas G, Trsek H, Jasperneite J, Kastner W, Diedrich C. Requirements
Analysis for the Evaluation of Automated Security Risk Assessments. IEEE;
2024:180-183. doi:10.1109/wfcs60972.2024.10540830
apa: Ehrlich, M., Lukas, G., Trsek, H., Jasperneite, J., Kastner, W., & Diedrich,
C. (2024). Requirements Analysis for the Evaluation of Automated Security Risk
Assessments. In 2024 IEEE 20th International Conference on Factory Communication
Systems (WFCS) (pp. 180–183). IEEE. https://doi.org/10.1109/wfcs60972.2024.10540830
bjps: 'Ehrlich M et al. (2024) Requirements Analysis for the Evaluation
of Automated Security Risk Assessments. [Piscataway, NJ]: IEEE.'
chicago: 'Ehrlich, Marco, Georg Lukas, Henning Trsek, Jürgen Jasperneite, Wolfgang
Kastner, and Christian Diedrich. Requirements Analysis for the Evaluation of
Automated Security Risk Assessments. 2024 IEEE 20th International Conference
on Factory Communication Systems (WFCS). IEEE International Workshop on Factory
Communication Systems. [Piscataway, NJ]: IEEE, 2024. https://doi.org/10.1109/wfcs60972.2024.10540830.'
chicago-de: 'Ehrlich, Marco, Georg Lukas, Henning Trsek, Jürgen Jasperneite, Wolfgang
Kastner und Christian Diedrich. 2024. Requirements Analysis for the Evaluation
of Automated Security Risk Assessments. 2024 IEEE 20th International Conference
on Factory Communication Systems (WFCS). IEEE International Workshop on Factory
Communication Systems. [Piscataway, NJ]: IEEE. doi:10.1109/wfcs60972.2024.10540830,
.'
din1505-2-1: 'Ehrlich, Marco ; Lukas, Georg ; Trsek,
Henning ; Jasperneite, Jürgen
; Kastner, Wolfgang ; Diedrich,
Christian: Requirements Analysis for the Evaluation of Automated Security
Risk Assessments, IEEE International Workshop on Factory Communication
Systems. [Piscataway, NJ] : IEEE, 2024'
havard: M. Ehrlich, G. Lukas, H. Trsek, J. Jasperneite, W. Kastner, C. Diedrich,
Requirements Analysis for the Evaluation of Automated Security Risk Assessments,
IEEE, [Piscataway, NJ], 2024.
ieee: 'M. Ehrlich, G. Lukas, H. Trsek, J. Jasperneite, W. Kastner, and C. Diedrich,
Requirements Analysis for the Evaluation of Automated Security Risk Assessments.
[Piscataway, NJ]: IEEE, 2024, pp. 180–183. doi: 10.1109/wfcs60972.2024.10540830.'
mla: Ehrlich, Marco, et al. “Requirements Analysis for the Evaluation of Automated
Security Risk Assessments.” 2024 IEEE 20th International Conference on Factory
Communication Systems (WFCS), IEEE, 2024, pp. 180–83, https://doi.org/10.1109/wfcs60972.2024.10540830.
short: M. Ehrlich, G. Lukas, H. Trsek, J. Jasperneite, W. Kastner, C. Diedrich,
Requirements Analysis for the Evaluation of Automated Security Risk Assessments,
IEEE, [Piscataway, NJ], 2024.
ufg: 'Ehrlich, Marco u. a.: Requirements Analysis for the Evaluation of Automated
Security Risk Assessments, [Piscataway, NJ] 2024 (IEEE International Workshop
on Factory Communication Systems).'
van: 'Ehrlich M, Lukas G, Trsek H, Jasperneite J, Kastner W, Diedrich C. Requirements
Analysis for the Evaluation of Automated Security Risk Assessments. 2024 IEEE
20th International Conference on Factory Communication Systems (WFCS). [Piscataway,
NJ]: IEEE; 2024. (IEEE International Workshop on Factory Communication Systems).'
conference:
end_date: 2024-04-19
location: Toulouse, FRANCE
name: 20th International Conference on Factory Communication Systems (WFCS)
start_date: 2024-04-17
date_created: 2025-04-23T07:50:00Z
date_updated: 2025-06-25T12:59:44Z
department:
- _id: DEP5023
doi: 10.1109/wfcs60972.2024.10540830
keyword:
- Industry 4.0
- Security
- Risk Assessment
- Automation
- Requirements
- Evaluation
- Verification
language:
- iso: eng
page: 180-183
place: '[Piscataway, NJ]'
publication: 2024 IEEE 20th International Conference on Factory Communication Systems
(WFCS)
publication_identifier:
eisbn:
- 979-8-3503-1934-7
isbn:
- 979-8-3503-1935-4
- 979-8-3503-1933-0
issn:
- 2835-8511
publication_status: published
publisher: IEEE
series_title: IEEE International Workshop on Factory Communication Systems
status: public
title: Requirements Analysis for the Evaluation of Automated Security Risk Assessments
type: conference_editor_article
user_id: '83781'
year: '2024'
...
---
_id: '13224'
abstract:
- lang: eng
text: This paper presents a robust methodology for optimizing CO2 emissions and
electricity costs in industrial applications, with the aim of developing a flexible
and dynamic energy management strategy that balances sustainability and cost-efficiency.
Addressing the growing need for sustainable and economically viable energy solutions
amidst the global urgency of climate change mitigation, the proposed approach
is based on dynamic energy management techniques that minimize dependence on grid
electricity, which can fluctuate between energy import and export. A flexible
cost function is developed to simultaneously account for CO2 emissions and electricity
prices, enabling a balance between environmental impact and operational costs.
The optimization framework employs Mixed-Integer Linear Programming (MILP) to
derive the optimal energy management strategy, showcasing significant potential
for reducing both CO2 emissions and electricity costs. Although the methodology
is demonstrated in a specific industrial setting, its flexible design ensures
applicability across various energy profiles and operational scenarios, making
it relevant for a wide range of industrial applications.
author:
- first_name: Seyed Davood
full_name: Mousavi, Seyed Davood
id: '79148'
last_name: Mousavi
- first_name: Martin
full_name: Griese, Martin
id: '52308'
last_name: Griese
- first_name: Thomas
full_name: Schulte, Thomas
id: '46242'
last_name: Schulte
citation:
ama: Mousavi SD, Griese M, Schulte T. Dynamic Optimization of CO2
Emissions and Electricity Costs in Smart Factories. IEEE; 2024. doi:10.1109/icecer62944.2024.10920418
apa: Mousavi, S. D., Griese, M., & Schulte, T. (2024). Dynamic Optimization
of CO2 Emissions and Electricity Costs in Smart Factories. In 2024
International Conference on Electrical and Computer Engineering Researches (ICECER).
2024 International Conference on Electrical and Computer Engineering Researches
(ICECER), Gaborone, Botswana . IEEE. https://doi.org/10.1109/icecer62944.2024.10920418
bjps: 'Mousavi SD, Griese M and Schulte T (2024) Dynamic Optimization
of CO2 Emissions and Electricity Costs in Smart Factories. [Piscataway,
NJ]: IEEE.'
chicago: 'Mousavi, Seyed Davood, Martin Griese, and Thomas Schulte. Dynamic Optimization
of CO2 Emissions and Electricity Costs in Smart Factories. 2024
International Conference on Electrical and Computer Engineering Researches (ICECER).
[Piscataway, NJ]: IEEE, 2024. https://doi.org/10.1109/icecer62944.2024.10920418.'
chicago-de: 'Mousavi, Seyed Davood, Martin Griese und Thomas Schulte. 2024. Dynamic
Optimization of CO2 Emissions and Electricity Costs in Smart Factories.
2024 International Conference on Electrical and Computer Engineering Researches
(ICECER). [Piscataway, NJ]: IEEE. doi:10.1109/icecer62944.2024.10920418,
.'
din1505-2-1: 'Mousavi, Seyed Davood
; Griese, Martin ; Schulte,
Thomas: Dynamic Optimization of CO2 Emissions and Electricity
Costs in Smart Factories. [Piscataway, NJ] : IEEE, 2024'
havard: S.D. Mousavi, M. Griese, T. Schulte, Dynamic Optimization of CO2
Emissions and Electricity Costs in Smart Factories, IEEE, [Piscataway, NJ], 2024.
ieee: 'S. D. Mousavi, M. Griese, and T. Schulte, Dynamic Optimization of CO2
Emissions and Electricity Costs in Smart Factories. [Piscataway, NJ]: IEEE,
2024. doi: 10.1109/icecer62944.2024.10920418.'
mla: Mousavi, Seyed Davood, et al. “Dynamic Optimization of CO2 Emissions
and Electricity Costs in Smart Factories.” 2024 International Conference on
Electrical and Computer Engineering Researches (ICECER), IEEE, 2024, https://doi.org/10.1109/icecer62944.2024.10920418.
short: S.D. Mousavi, M. Griese, T. Schulte, Dynamic Optimization of CO2
Emissions and Electricity Costs in Smart Factories, IEEE, [Piscataway, NJ], 2024.
ufg: 'Mousavi, Seyed Davood/Griese, Martin/Schulte, Thomas: Dynamic Optimization
of CO2 Emissions and Electricity Costs in Smart Factories, [Piscataway,
NJ] 2024.'
van: 'Mousavi SD, Griese M, Schulte T. Dynamic Optimization of CO2 Emissions
and Electricity Costs in Smart Factories. 2024 International Conference on Electrical
and Computer Engineering Researches (ICECER). [Piscataway, NJ]: IEEE; 2024.'
conference:
end_date: 2024-12-06
location: 'Gaborone, Botswana '
name: 2024 International Conference on Electrical and Computer Engineering Researches
(ICECER)
start_date: 2024-12-04
date_created: 2025-09-29T09:36:25Z
date_updated: 2025-10-06T13:05:59Z
department:
- _id: DEP6020
- _id: DEP5022
doi: 10.1109/icecer62944.2024.10920418
keyword:
- CO2 Reduction
- Electricity Cost Minimization
- Life Cycle Assessment
- MILP
- Smart-E-Factory
- Dynamic Energy Management
language:
- iso: eng
place: '[Piscataway, NJ]'
publication: 2024 International Conference on Electrical and Computer Engineering
Researches (ICECER)
publication_status: published
publisher: IEEE
status: public
title: Dynamic Optimization of CO2 Emissions and Electricity Costs in Smart
Factories
type: conference_editor_article
user_id: '83781'
year: '2024'
...
---
_id: '11360'
abstract:
- lang: eng
text: The state of health and lifetime estimation process of electrical connectors
via lifetime tests is a time and labor intensive process. In our previous work,
a correlation between the contact resistance developments in the early stages
of lifetime tests of electrical connectors with the final results was established
using a data driven statistical process based on probability distribution. Also,
state of health indicators for prognosis of lifetime were introduced. In this
work, the state of health indicators have been optimized. The sensitivity analysis
is performed with regards to the selection of the appropriate amount of test data
based on test duration for the reliable prognosis of the state of health and the
characteristic lifetime. Through this the possibility of further reduction of
test duration required for the reliable prognosis of state of health is investigated.
Based on the results of analysis, a guideline for the determination of the duration
of lifetime tests which lead to a reliable prediction of lifetime of connectors
can be provided. Also, an assessment of the state of art in the prognosis of the
lifetime of electrical connectors has been presented.
author:
- first_name: Jian
full_name: Song, Jian
id: '5297'
last_name: Song
- first_name: Abhay Rammurti
full_name: Shukla, Abhay Rammurti
id: '74188'
last_name: Shukla
- first_name: Roman
full_name: Probst, Roman
id: '69156'
last_name: Probst
citation:
ama: Song J, Shukla AR, Probst R. Advances in Evaluation of State of Health of
Electrical Connectors. IEEE; 2023:200-208. doi:10.1109/holm56075.2023.10352279
apa: Song, J., Shukla, A. R., & Probst, R. (2023). Advances in Evaluation of
State of Health of Electrical Connectors. In 2023 IEEE 68th Holm Conference
on Electrical Contacts (HOLM) (pp. 200–208). IEEE. https://doi.org/10.1109/holm56075.2023.10352279
bjps: 'Song J, Shukla AR and Probst R (2023) Advances in Evaluation of
State of Health of Electrical Connectors. [Piscataway, NJ]: IEEE.'
chicago: 'Song, Jian, Abhay Rammurti Shukla, and Roman Probst. Advances in Evaluation
of State of Health of Electrical Connectors. 2023 IEEE 68th Holm Conference
on Electrical Contacts (HOLM). Electrical Contacts-IEEE Holm Conference on
Electrical Contacts. [Piscataway, NJ]: IEEE, 2023. https://doi.org/10.1109/holm56075.2023.10352279.'
chicago-de: 'Song, Jian, Abhay Rammurti Shukla und Roman Probst. 2023. Advances
in Evaluation of State of Health of Electrical Connectors. 2023 IEEE 68th
Holm Conference on Electrical Contacts (HOLM). Electrical Contacts-IEEE Holm
Conference on Electrical Contacts. [Piscataway, NJ]: IEEE. doi:10.1109/holm56075.2023.10352279,
.'
din1505-2-1: 'Song, Jian ; Shukla,
Abhay Rammurti ; Probst, Roman:
Advances in Evaluation of State of Health of Electrical Connectors, Electrical
Contacts-IEEE Holm Conference on Electrical Contacts. [Piscataway, NJ] : IEEE,
2023'
havard: J. Song, A.R. Shukla, R. Probst, Advances in Evaluation of State of Health
of Electrical Connectors, IEEE, [Piscataway, NJ], 2023.
ieee: 'J. Song, A. R. Shukla, and R. Probst, Advances in Evaluation of State
of Health of Electrical Connectors. [Piscataway, NJ]: IEEE, 2023, pp. 200–208.
doi: 10.1109/holm56075.2023.10352279.'
mla: Song, Jian, et al. “Advances in Evaluation of State of Health of Electrical
Connectors.” 2023 IEEE 68th Holm Conference on Electrical Contacts (HOLM),
IEEE, 2023, pp. 200–08, https://doi.org/10.1109/holm56075.2023.10352279.
short: J. Song, A.R. Shukla, R. Probst, Advances in Evaluation of State of Health
of Electrical Connectors, IEEE, [Piscataway, NJ], 2023.
ufg: 'Song, Jian/Shukla, Abhay Rammurti/Probst, Roman: Advances in Evaluation
of State of Health of Electrical Connectors, [Piscataway, NJ] 2023 (Electrical
Contacts-IEEE Holm Conference on Electrical Contacts).'
van: 'Song J, Shukla AR, Probst R. Advances in Evaluation of State of Health of
Electrical Connectors. 2023 IEEE 68th Holm Conference on Electrical Contacts (HOLM).
[Piscataway, NJ]: IEEE; 2023. (Electrical Contacts-IEEE Holm Conference on Electrical
Contacts).'
conference:
end_date: 2023-10-11
location: Seattle
name: 68th Holm Conference on Electrical Contacts (HOLM)
start_date: 2023-10-04
date_created: 2024-04-18T10:11:50Z
date_updated: 2025-06-26T07:54:50Z
doi: 10.1109/holm56075.2023.10352279
keyword:
- accelerated life testing
- test duration
- contact resistance
- statistical model
- connector reliability
language:
- iso: eng
page: 200-208
place: '[Piscataway, NJ]'
publication: 2023 IEEE 68th Holm Conference on Electrical Contacts (HOLM)
publication_identifier:
eisbn:
- 979‐8‐3503‐4246‐8
- '979‐8‐3503‐4245‐1 '
eissn:
- 2158‐9992
isbn:
- 979‐8‐3503‐4244‐4
issn:
- 2158-9992
publication_status: published
publisher: IEEE
series_title: Electrical Contacts-IEEE Holm Conference on Electrical Contacts
status: public
title: Advances in Evaluation of State of Health of Electrical Connectors
type: conference_editor_article
user_id: '83781'
year: '2023'
...
---
_id: '11385'
abstract:
- lang: eng
text: Accurate pH calculations are essential for scientists across different disciplines
to design optimal reactor solutions, but they can be arduous to calculate for
complex acid-base solutions. Visual Water is a powerful software tool that provides
accurate pH calculations with automated mathematical uncertainty analysis. Its
workflow is presented and validated using acids and bases, showing a deviation
of < 0.2 pH units between measured and calculated pH values. This highlights the
software's reliability, which can help to simplify the work of non-experts in
water chemistry.
author:
- first_name: Pascal
full_name: Kosse, Pascal
last_name: Kosse
- first_name: Tanja
full_name: Hernández Rodriguez, Tanja
id: '52466'
last_name: Hernández Rodriguez
- first_name: Björn
full_name: Frahm, Björn
id: '45666'
last_name: Frahm
- first_name: Manfred
full_name: Lübken, Manfred
last_name: Lübken
- first_name: Marc
full_name: Wichern, Marc
last_name: Wichern
citation:
ama: Kosse P, Hernández Rodriguez T, Frahm B, Lübken M, Wichern M. Validation and
Uncertainty Assessment of a Software‐Integrated Workflow for pH Calculations.
Chemie Ingenieur Technik. 2023;95(12):1960-1969. doi:10.1002/cite.202300082
apa: Kosse, P., Hernández Rodriguez, T., Frahm, B., Lübken, M., & Wichern, M.
(2023). Validation and Uncertainty Assessment of a Software‐Integrated Workflow
for pH Calculations. Chemie Ingenieur Technik, 95(12), 1960–1969.
https://doi.org/10.1002/cite.202300082
bjps: Kosse P et al. (2023) Validation and Uncertainty Assessment
of a Software‐Integrated Workflow for PH Calculations. Chemie Ingenieur Technik
95, 1960–1969.
chicago: 'Kosse, Pascal, Tanja Hernández Rodriguez, Björn Frahm, Manfred Lübken,
and Marc Wichern. “Validation and Uncertainty Assessment of a Software‐Integrated
Workflow for PH Calculations.” Chemie Ingenieur Technik 95, no. 12 (2023):
1960–69. https://doi.org/10.1002/cite.202300082.'
chicago-de: 'Kosse, Pascal, Tanja Hernández Rodriguez, Björn Frahm, Manfred Lübken
und Marc Wichern. 2023. Validation and Uncertainty Assessment of a Software‐Integrated
Workflow for pH Calculations. Chemie Ingenieur Technik 95, Nr. 12: 1960–1969.
doi:10.1002/cite.202300082,
.'
din1505-2-1: 'Kosse, Pascal ; Hernández Rodriguez, Tanja ; Frahm,
Björn ; Lübken, Manfred ;
Wichern, Marc: Validation and Uncertainty
Assessment of a Software‐Integrated Workflow for pH Calculations. In: Chemie
Ingenieur Technik Bd. 95. Weinheim, Wiley (2023), Nr. 12, S. 1960–1969'
havard: P. Kosse, T. Hernández Rodriguez, B. Frahm, M. Lübken, M. Wichern, Validation
and Uncertainty Assessment of a Software‐Integrated Workflow for pH Calculations,
Chemie Ingenieur Technik. 95 (2023) 1960–1969.
ieee: 'P. Kosse, T. Hernández Rodriguez, B. Frahm, M. Lübken, and M. Wichern, “Validation
and Uncertainty Assessment of a Software‐Integrated Workflow for pH Calculations,”
Chemie Ingenieur Technik, vol. 95, no. 12, pp. 1960–1969, 2023, doi: 10.1002/cite.202300082.'
mla: Kosse, Pascal, et al. “Validation and Uncertainty Assessment of a Software‐Integrated
Workflow for PH Calculations.” Chemie Ingenieur Technik, vol. 95, no. 12,
2023, pp. 1960–69, https://doi.org/10.1002/cite.202300082.
short: P. Kosse, T. Hernández Rodriguez, B. Frahm, M. Lübken, M. Wichern, Chemie
Ingenieur Technik 95 (2023) 1960–1969.
ufg: 'Kosse, Pascal u. a.: Validation and Uncertainty Assessment of a Software‐Integrated
Workflow for pH Calculations, in: Chemie Ingenieur Technik 95 (2023), H.
12, S. 1960–1969.'
van: Kosse P, Hernández Rodriguez T, Frahm B, Lübken M, Wichern M. Validation and
Uncertainty Assessment of a Software‐Integrated Workflow for pH Calculations.
Chemie Ingenieur Technik. 2023;95(12):1960–9.
date_created: 2024-04-26T06:52:48Z
date_updated: 2025-06-26T07:50:29Z
department:
- _id: DEP4000
doi: 10.1002/cite.202300082
external_id:
isi:
- '001073579300001'
intvolume: ' 95'
isi: '1'
issue: '12'
keyword:
- Acid-base equilibria
- Carboxylic acids
- Dissociation constants
- pH calculation software
- Uncertainty assessment
language:
- iso: eng
page: 1960-1969
place: Weinheim
publication: Chemie Ingenieur Technik
publication_identifier:
eissn:
- 1522-2640
issn:
- 0009-286X
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Validation and Uncertainty Assessment of a Software‐Integrated Workflow for
pH Calculations
type: scientific_journal_article
user_id: '83781'
volume: 95
year: '2023'
...
---
_id: '11409'
abstract:
- lang: eng
text: The current era, characterized by rapid digitalization, globalization and
environmental issues, poses unique challenges and opportunities for both the educational
sector and professional development. Increasingly, the research community calls
for future-oriented skills as well as attitudes and values as underlying implicit
concepts in order to meet the needs of today’s complex demands. These skills and
implicit concepts include responsibility, inclusiveness, reflexivity, anticipation,
data literacy or digital and interdisciplinary working. Some of them are based
on facts and are therefore teachable, while others seem to be a matter of personal
attitude and socialization and are therefore difficult to convey. In this paper
we suggest educators to change their specialized knowledge-teaching settings into
transdisciplinary learning contexts [1] and thus enabling transformative, situated,
experiential and informal learning. We provide theoretical examples in which these
didactic methodologies seem to be effective in order to impart these skills and
reinforce the underlying implicit concepts. We will dive deeper into these arguments
during the conference, while participants are encouraged to discuss the various
elements that influence the concepts in the context of transdisciplinary learning.
(DIPF/Orig.); Die heutige Zeit, die durch eine rasante Digitalisierung, Globalisierung
und Umweltprobleme gekennzeichnet ist, stellt sowohl den Bildungssektor als auch
die berufliche Entwicklung vor einzigartige Herausforderungen und Chancen. In
der Forschung werden zunehmend zukunftsorientierte Fähigkeiten sowie Einstellungen
und Werte als zugrundeliegende implizite Konzepte gefordert, um den komplexen
Anforderungen von heute gerecht zu werden. Zu diesen Fähigkeiten und impliziten
Konzepten gehören Verantwortungsbewusstsein, Inklusivität, Reflexivität, Antizipation,
Datenkompetenz oder digitales und interdisziplinäres Arbeiten. Einige von ihnen
basieren auf Fakten und sind daher lehrbar, während andere eine Frage der persönlichen
Einstellung und Sozialisation zu sein scheinen und daher schwer zu vermitteln
sind. In diesem Beitrag schlagen wir Pädagogen vor, ihre spezialisierten Wissenslehrsettings
in transdisziplinäre Lernkontexte [1] zu verwandeln und so transformatives, situiertes,
erfahrungsbasiertes und informelles Lernen zu ermöglichen. Wir stellen theoretische
Beispiele vor, in denen diese didaktischen Methoden effektiv zu sein scheinen,
um diese Fähigkeiten zu vermitteln und die zugrunde liegenden impliziten Konzepte
zu stärken. Wir werden diese Argumente während der Konferenz vertiefen, während
die Teilnehmer aufgefordert sind, die verschiedenen Elemente zu diskutieren, die
die Konzepte im Kontext des transdisziplinären Lernens beeinflussen. (Autor)
author:
- first_name: Marie
full_name: Alavi, Marie
id: '83234'
last_name: Alavi
- first_name: Tobias
full_name: Schmohl, Tobias
id: '71782'
last_name: Schmohl
orcid: https://orcid.org/0000-0002-7043-5582
citation:
ama: Alavi M, Schmohl T. Transformative Learning. Methodological and Conceptual
Prerequisites for Future-Oriented Skill-Building. Filodiritto Editore; 2023:5
S. doi:https://doi.org/10.25656/01:27907
apa: Alavi, M., & Schmohl, T. (2023). Transformative learning. Methodological
and conceptual prerequisites for future-oriented skill-building. In Conference
proceedings. 13th international conference “The future of education”. Hybrid edition,
29-30 June 2023 (p. 5 S.). Filodiritto Editore. https://doi.org/10.25656/01:27907
bjps: 'Alavi M and Schmohl T (2023) Transformative Learning. Methodological
and Conceptual Prerequisites for Future-Oriented Skill-Building. Bologna:
Filodiritto Editore.'
chicago: 'Alavi, Marie, and Tobias Schmohl. Transformative Learning. Methodological
and Conceptual Prerequisites for Future-Oriented Skill-Building. Conference
Proceedings. 13th International Conference “The Future of Education”. Hybrid Edition,
29-30 June 2023. Bologna: Filodiritto Editore, 2023. https://doi.org/10.25656/01:27907.'
chicago-de: 'Alavi, Marie und Tobias Schmohl. 2023. Transformative learning.
Methodological and conceptual prerequisites for future-oriented skill-building.
Conference proceedings. 13th international conference „The future of education“.
Hybrid edition, 29-30 June 2023. Bologna: Filodiritto Editore. doi:https://doi.org/10.25656/01:27907,
.'
din1505-2-1: 'Alavi, Marie ; Schmohl, Tobias: Transformative learning.
Methodological and conceptual prerequisites for future-oriented skill-building.
Bologna : Filodiritto Editore, 2023'
havard: M. Alavi, T. Schmohl, Transformative learning. Methodological and conceptual
prerequisites for future-oriented skill-building, Filodiritto Editore, Bologna,
2023.
ieee: 'M. Alavi and T. Schmohl, Transformative learning. Methodological and conceptual
prerequisites for future-oriented skill-building. Bologna: Filodiritto Editore,
2023, p. 5 S. doi: https://doi.org/10.25656/01:27907.'
mla: Alavi, Marie, and Tobias Schmohl. “Transformative Learning. Methodological
and Conceptual Prerequisites for Future-Oriented Skill-Building.” Conference
Proceedings. 13th International Conference “The Future of Education”. Hybrid Edition,
29-30 June 2023, Filodiritto Editore, 2023, p. 5 S., https://doi.org/10.25656/01:27907.
short: M. Alavi, T. Schmohl, Transformative Learning. Methodological and Conceptual
Prerequisites for Future-Oriented Skill-Building, Filodiritto Editore, Bologna,
2023.
ufg: 'Alavi, Marie/Schmohl, Tobias: Transformative learning. Methodological
and conceptual prerequisites for future-oriented skill-building, Bologna 2023.'
van: 'Alavi M, Schmohl T. Transformative learning. Methodological and conceptual
prerequisites for future-oriented skill-building. Conference proceedings. 13th
international conference “The future of education”. Hybrid edition, 29-30 June
2023. Bologna: Filodiritto Editore; 2023.'
conference:
end_date: 2023-06-30
location: Bologna
name: 13th international conference "The future of education".
start_date: 2023-06-29
date_created: 2024-04-30T18:26:19Z
date_updated: 2024-05-14T14:19:40Z
department:
- _id: DEP2000
doi: https://doi.org/10.25656/01:27907
keyword:
- Transformation
- Lernen
- Methodologie
- Interdisziplinarität
- Informelles Lernen
- Lebenslanges Lernen
- Hochschulbildung
- Zukunftsorientierung
- Kompetenz
- Learning
- Methodology
- Interdisciplinarity
- Informal learning
- Life long learning
- Life-long learning
- Lifelong learning
- Higher education
- University level of education
- Future orientation
- Competency
language:
- iso: eng
page: 5 S.
place: Bologna
publication: Conference proceedings. 13th international conference "The future of
education". Hybrid edition, 29-30 June 2023
publication_identifier:
isbn:
- 979-12-80225-59-7
issn:
- 2384-9509
publication_status: published
publisher: Filodiritto Editore
quality_controlled: '1'
status: public
title: Transformative learning. Methodological and conceptual prerequisites for future-oriented
skill-building
type: conference_editor_article
user_id: '83781'
year: '2023'
...
---
_id: '12875'
abstract:
- lang: eng
text: 'Manufacturing systems based on Industry 4.0 concepts provide a greater availability
of data and have modular characteristics enabling frequent changes. This raises
the need for new security engineering concepts that cover the increasing complexity
and frequency of mandatory security risk assessments. In contrast, the current
standardization landscape used for the assessment of these systems only offers
abstract, static, manual, and resource-intensive procedures. Therefore, this work
proposes a method that further specifies the IEC 62443 aiming to automate the
security risk assessments in such a way that manual efforts can be reduced and
a consistent quality can be achieved. The methodology is presented using network
segmentation as a guiding example and consists of four main steps: Information
collection based on a process analysis, information formalisation with a semi-formal
model, information usage applying first order logic to extract expert knowledge,
and information access using the concept of the digital twin. In addition, the
applicability of the IEC 62443 standard to the risk assessment of modular manufacturing
systems is evaluated.'
alternative_title:
- Process analysis and information model proposal
author:
- first_name: Marco
full_name: Ehrlich, Marco
id: '61562'
last_name: Ehrlich
- first_name: Andre
full_name: Bröring, Andre
id: '65130'
last_name: Bröring
- first_name: Christian
full_name: Diedrich, Christian
last_name: Diedrich
- first_name: Jürgen
full_name: Jasperneite, Jürgen
id: '1899'
last_name: Jasperneite
citation:
ama: 'Ehrlich M, Bröring A, Diedrich C, Jasperneite J. Towards automated risk assessments
for modular manufacturing systems. Automatisierungstechnik : AT . 2023;71(6):453-466.
doi:10.1515/auto-2022-0098'
apa: 'Ehrlich, M., Bröring, A., Diedrich, C., & Jasperneite, J. (2023). Towards
automated risk assessments for modular manufacturing systems. Automatisierungstechnik :
AT , 71(6), 453–466. https://doi.org/10.1515/auto-2022-0098'
bjps: 'Ehrlich M et al. (2023) Towards Automated Risk Assessments
for Modular Manufacturing Systems. Automatisierungstechnik : AT 71,
453–466.'
chicago: 'Ehrlich, Marco, Andre Bröring, Christian Diedrich, and Jürgen Jasperneite.
“Towards Automated Risk Assessments for Modular Manufacturing Systems.” Automatisierungstechnik :
AT 71, no. 6 (2023): 453–66. https://doi.org/10.1515/auto-2022-0098.'
chicago-de: 'Ehrlich, Marco, Andre Bröring, Christian Diedrich und Jürgen Jasperneite.
2023. Towards automated risk assessments for modular manufacturing systems. Automatisierungstechnik :
AT 71, Nr. 6: 453–466. doi:10.1515/auto-2022-0098,
.'
din1505-2-1: 'Ehrlich, Marco ; Bröring, Andre ; Diedrich,
Christian ; Jasperneite, Jürgen:
Towards automated risk assessments for modular manufacturing systems. In: Automatisierungstechnik :
AT Bd. 71. Berlin, Walter de Gruyter GmbH (2023), Nr. 6, S. 453–466'
havard: 'M. Ehrlich, A. Bröring, C. Diedrich, J. Jasperneite, Towards automated
risk assessments for modular manufacturing systems, Automatisierungstechnik :
AT . 71 (2023) 453–466.'
ieee: 'M. Ehrlich, A. Bröring, C. Diedrich, and J. Jasperneite, “Towards automated
risk assessments for modular manufacturing systems,” Automatisierungstechnik :
AT , vol. 71, no. 6, pp. 453–466, 2023, doi: 10.1515/auto-2022-0098.'
mla: 'Ehrlich, Marco, et al. “Towards Automated Risk Assessments for Modular Manufacturing
Systems.” Automatisierungstechnik : AT , vol. 71, no. 6, 2023, pp. 453–66,
https://doi.org/10.1515/auto-2022-0098.'
short: 'M. Ehrlich, A. Bröring, C. Diedrich, J. Jasperneite, Automatisierungstechnik :
AT 71 (2023) 453–466.'
ufg: 'Ehrlich, Marco u. a.: Towards automated risk assessments for modular
manufacturing systems, in: Automatisierungstechnik : AT 71 (2023), H.
6, S. 453–466.'
van: 'Ehrlich M, Bröring A, Diedrich C, Jasperneite J. Towards automated risk assessments
for modular manufacturing systems. Automatisierungstechnik : AT . 2023;71(6):453–66.'
date_created: 2025-04-29T07:17:44Z
date_updated: 2025-06-25T13:14:59Z
department:
- _id: DEP5023
doi: 10.1515/auto-2022-0098
external_id:
isi:
- '001004217900004'
intvolume: ' 71'
isi: '1'
issue: '6'
keyword:
- sasset administration shell
- automation
- information model
- modular manufacturing system
- risk assessment
- security
language:
- iso: eng
page: 453-466
place: Berlin
publication: 'Automatisierungstechnik : AT '
publication_identifier:
eissn:
- 2196-677X
issn:
- 0178-2312
publication_status: published
publisher: Walter de Gruyter GmbH
status: public
title: Towards automated risk assessments for modular manufacturing systems
type: scientific_journal_article
user_id: '83781'
volume: 71
year: '2023'
...
---
_id: '13581'
abstract:
- lang: eng
text: ObjectiveMany people, including patients with eating disorders (EDs), experience
an increased urge for physical activity. "Trait"-like activity in patients with
EDs is assessed by existing questionnaires, but there are few clinically validated
assessments of a "state" urge to be physically active. Here, we developed and
validated the State Urge to be Physically Active-Questionnaire (SUPA-Q). MethodsAfter
developing and piloting the items, N = 126 patients with EDs (mostly anorexia
nervosa and bulimia nervosa) took part in our mixed-longitudinal validation study
with one primary assessment for all patients and a secondary assessment for a
subsample of patients. Cronbach's & alpha; and split-half-methods served as measures
of consistency and reliability. Correlations with other questionnaires were used
to determine convergent and divergent validity, and confirmatory factor analysis
was used for investigating factorial validity. We used paired-samples t-tests
for repeated assessments to investigate change sensitivity. ResultsWe found the
SUPA-Q to be highly consistent, and reliable and to demonstrate convergent, divergent,
and factorial validity. The comparison of SUPA-Q scores from repeated assessments
within a subsample of patients demonstrated the questionnaire's change sensitivity,
Cohen's d = 0.48. Moreover, an increase in SUPA-Q scores was associated with a
less positive mood, more anxiety, more body dissatisfaction, more tenseness, less
feelings of control, and more stress. DiscussionThe newly developed SUPA-Q may
help to accentuate the necessity to evaluate and address the acute urge to engage
in physical activity in patients with EDs in clinical practice and ultimately
support tailoring treatments to patients' unique symptom patterns. The questionnaire
is available at .
article_number: e3220
author:
- first_name: Lina
full_name: Amin, Lina
last_name: Amin
- first_name: Georg
full_name: Halbeisen, Georg
id: '85780'
last_name: Halbeisen
orcid: 0000-0002-9529-2215
- first_name: Karsten
full_name: Braks, Karsten
last_name: Braks
- first_name: Thomas J.J.
full_name: Huber, Thomas J.J.
last_name: Huber
- first_name: Georgios
full_name: Paslakis, Georgios
last_name: Paslakis
citation:
ama: 'Amin L, Halbeisen G, Braks K, Huber TJJ, Paslakis G. The State Urge to be
Physically Active-Questionnaire (SUPA-Q): Development and validation of a state
measure of activity urges in patients with eating disorders. Brain and Behavior.
2023;13(10). doi:10.1002/brb3.3220'
apa: 'Amin, L., Halbeisen, G., Braks, K., Huber, T. J. J., & Paslakis, G. (2023).
The State Urge to be Physically Active-Questionnaire (SUPA-Q): Development and
validation of a state measure of activity urges in patients with eating disorders.
Brain and Behavior, 13(10), Article e3220. https://doi.org/10.1002/brb3.3220'
bjps: 'Amin L et al. (2023) The State Urge to Be Physically Active-Questionnaire
(SUPA-Q): Development and Validation of a State Measure of Activity Urges in Patients
with Eating Disorders. Brain and Behavior 13.'
chicago: 'Amin, Lina, Georg Halbeisen, Karsten Braks, Thomas J.J. Huber, and Georgios
Paslakis. “The State Urge to Be Physically Active-Questionnaire (SUPA-Q): Development
and Validation of a State Measure of Activity Urges in Patients with Eating Disorders.”
Brain and Behavior 13, no. 10 (2023). https://doi.org/10.1002/brb3.3220.'
chicago-de: 'Amin, Lina, Georg Halbeisen, Karsten Braks, Thomas J.J. Huber und Georgios
Paslakis. 2023. The State Urge to be Physically Active-Questionnaire (SUPA-Q):
Development and validation of a state measure of activity urges in patients with
eating disorders. Brain and Behavior 13, Nr. 10. doi:10.1002/brb3.3220,
.'
din1505-2-1: 'Amin, Lina ; Halbeisen,
Georg ; Braks, Karsten ;
Huber, Thomas J.J. ; Paslakis,
Georgios: The State Urge to be Physically Active-Questionnaire (SUPA-Q):
Development and validation of a state measure of activity urges in patients with
eating disorders. In: Brain and Behavior Bd. 13. Malden, Mass., Wiley (2023),
Nr. 10'
havard: 'L. Amin, G. Halbeisen, K. Braks, T.J.J. Huber, G. Paslakis, The State Urge
to be Physically Active-Questionnaire (SUPA-Q): Development and validation of
a state measure of activity urges in patients with eating disorders, Brain and
Behavior. 13 (2023).'
ieee: 'L. Amin, G. Halbeisen, K. Braks, T. J. J. Huber, and G. Paslakis, “The State
Urge to be Physically Active-Questionnaire (SUPA-Q): Development and validation
of a state measure of activity urges in patients with eating disorders,” Brain
and Behavior, vol. 13, no. 10, Art. no. e3220, 2023, doi: 10.1002/brb3.3220.'
mla: 'Amin, Lina, et al. “The State Urge to Be Physically Active-Questionnaire (SUPA-Q):
Development and Validation of a State Measure of Activity Urges in Patients with
Eating Disorders.” Brain and Behavior, vol. 13, no. 10, e3220, 2023, https://doi.org/10.1002/brb3.3220.'
short: L. Amin, G. Halbeisen, K. Braks, T.J.J. Huber, G. Paslakis, Brain and Behavior
13 (2023).
ufg: 'Amin, Lina u. a.: The State Urge to be Physically Active-Questionnaire
(SUPA-Q): Development and validation of a state measure of activity urges in patients
with eating disorders, in: Brain and Behavior 13 (2023), H. 10.'
van: 'Amin L, Halbeisen G, Braks K, Huber TJJ, Paslakis G. The State Urge to be
Physically Active-Questionnaire (SUPA-Q): Development and validation of a state
measure of activity urges in patients with eating disorders. Brain and Behavior.
2023;13(10).'
date_created: 2026-03-25T13:36:10Z
date_updated: 2026-04-08T13:06:01Z
department:
- _id: DEP1500
doi: 10.1002/brb3.3220
extern: '1'
external_id:
isi:
- '001044780200001'
pmid:
- '37559422'
intvolume: ' 13'
isi: '1'
issue: '10'
keyword:
- eating disorders
- physical activity
- psychopathology
- psychotherapy
- symptom assessment
language:
- iso: eng
place: Malden, Mass.
pmid: '1'
publication: Brain and Behavior
publication_identifier:
eissn:
- 2162-3279
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: 'The State Urge to be Physically Active-Questionnaire (SUPA-Q): Development
and validation of a state measure of activity urges in patients with eating disorders'
type: scientific_journal_article
user_id: '83778'
volume: 13
year: '2023'
...
---
_id: '13909'
abstract:
- lang: eng
text: To drive forward a fundamental change in the construction sector to achieve
environmentally friendly progress in the construction processes, one promising
approach is the synchronous implementation of the three main drivers technology,
construction, and design. The key to this transformation is end-to-end digitalization.
Our approach aims to achieve a new architectural quality by linking digitized
design tools, ecological and environmentally friendly concepts, and serial production
processes. Against this background, two research projects were advanced to enable
adaptive prefabricated systems based on combined additive manufacturing. Two case
studies illustrate the research results. In the first, a digital assessment tool
is being developed to improve planning processes. With the tool, standardized
yet adaptive constructions can be evaluated according to their sustainability
impact in an early design phase. The second approach focuses on delivering a customized
material composition realized with additive manufacturing methods. In an automated
co-extrusion process, the dimensions and building-physical quality of story-high
wall panels (floor-to-ceiling) can be adapted to individual requirements. The
optimum balance of standardization vs individualized building solutions will introduce
a novel flexibility for the architectural design process as well as a higher production
efficiency. This strategy of individualized standardization is based on integrative
collaboration and visionary research.
article_number: '012071'
author:
- first_name: Jutta
full_name: Albus, Jutta
last_name: Albus
- first_name: Kirsten
full_name: Hollmann-Schröter, Kirsten
id: '90080'
last_name: Hollmann-Schröter
orcid: https://orcid.org/0000-0003-2959-0211
citation:
ama: 'Albus J, Hollmann-Schröter K. Individualized standardization as the overarching
principle in the context of planetary boundaries. IOP Conference Series: Earth
and Environmental Science. 2022;1078(1). doi:10.1088/1755-1315/1078/1/012071'
apa: 'Albus, J., & Hollmann-Schröter, K. (2022). Individualized standardization
as the overarching principle in the context of planetary boundaries. IOP Conference
Series: Earth and Environmental Science, 1078(1), Article 012071. https://doi.org/10.1088/1755-1315/1078/1/012071'
bjps: 'Albus J and Hollmann-Schröter K (2022) Individualized Standardization
as the Overarching Principle in the Context of Planetary Boundaries. IOP Conference
Series: Earth and Environmental Science 1078.'
chicago: 'Albus, Jutta, and Kirsten Hollmann-Schröter. “Individualized Standardization
as the Overarching Principle in the Context of Planetary Boundaries.” IOP Conference
Series: Earth and Environmental Science 1078, no. 1 (2022). https://doi.org/10.1088/1755-1315/1078/1/012071.'
chicago-de: 'Albus, Jutta und Kirsten Hollmann-Schröter. 2022. Individualized standardization
as the overarching principle in the context of planetary boundaries. IOP Conference
Series: Earth and Environmental Science 1078, Nr. 1. doi:10.1088/1755-1315/1078/1/012071,
.'
din1505-2-1: 'Albus, Jutta ; Hollmann-Schröter, Kirsten: Individualized
standardization as the overarching principle in the context of planetary boundaries.
In: IOP Conference Series: Earth and Environmental Science Bd. 1078. London,
IOP Publishing (2022), Nr. 1'
havard: 'J. Albus, K. Hollmann-Schröter, Individualized standardization as the overarching
principle in the context of planetary boundaries, IOP Conference Series: Earth
and Environmental Science. 1078 (2022).'
ieee: 'J. Albus and K. Hollmann-Schröter, “Individualized standardization as the
overarching principle in the context of planetary boundaries,” IOP Conference
Series: Earth and Environmental Science, vol. 1078, no. 1, Art. no. 012071,
2022, doi: 10.1088/1755-1315/1078/1/012071.'
mla: 'Albus, Jutta, and Kirsten Hollmann-Schröter. “Individualized Standardization
as the Overarching Principle in the Context of Planetary Boundaries.” IOP Conference
Series: Earth and Environmental Science, vol. 1078, no. 1, 012071, 2022, https://doi.org/10.1088/1755-1315/1078/1/012071.'
short: 'J. Albus, K. Hollmann-Schröter, IOP Conference Series: Earth and Environmental
Science 1078 (2022).'
ufg: 'Albus, Jutta/Hollmann-Schröter, Kirsten: Individualized standardization
as the overarching principle in the context of planetary boundaries, in: IOP
Conference Series: Earth and Environmental Science 1078 (2022), H. 1.'
van: 'Albus J, Hollmann-Schröter K. Individualized standardization as the overarching
principle in the context of planetary boundaries. IOP Conference Series: Earth
and Environmental Science. 2022;1078(1).'
date_created: 2026-08-06T16:23:36Z
date_updated: 2026-08-07T09:03:23Z
department:
- _id: DEP1022
doi: 10.1088/1755-1315/1078/1/012071
extern: '1'
intvolume: ' 1078'
issue: '1'
keyword:
- Individualized standardization
- case study
- lightweight aerogel concrete technology
- adaptability
- sustainability assessment
language:
- iso: eng
place: London
publication: 'IOP Conference Series: Earth and Environmental Science'
publication_identifier:
eissn:
- 1755-1315
issn:
- 1755-1307
publication_status: published
publisher: IOP Publishing
status: public
title: Individualized standardization as the overarching principle in the context
of planetary boundaries
type: scientific_journal_article
user_id: '83781'
volume: 1078
year: '2022'
...
---
_id: '10590'
abstract:
- lang: ger
text: Das Kriechende Netzblatt, Goodyera repens, das von den Vorständen der Arbeitskreise
Heimische Orchideen Deutschlands (AHOs) zur Orchidee des Jahres 2021 gewählt wurde,
wird vorgestellt. Namensgebung, morphologische Merkmale und Lebenszyklus sowie
Ökologie und Lebensräume werden charakterisiert. Das Areal der Art wird beschrieben
und die Verbreitung für Deutschland kartographisch dargestellt. Gefährdungsursachen
werden erörtert und Schutzmaßnahmen aufgezeigt. Abschließend werden signifikante
Konsequenzen des Klimawandels für die Art diskutiert und in Beispielen dargelegt.
author:
- first_name: Marco
full_name: Klüber, Marco
last_name: Klüber
- first_name: Mathias
full_name: Lohr, Mathias
id: '22021'
last_name: Lohr
citation:
ama: 'Klüber M, Lohr M. Das Kriechende Netzblatt Goodyera repens (L.) R.Br. – Orchidee
des Jahres 2021 . Journal europäischer Orchideen : Mitteilungsblatt des AHO
Baden-Württemberg . 2022;54(1-2):3-27.'
apa: 'Klüber, M., & Lohr, M. (2022). Das Kriechende Netzblatt Goodyera repens
(L.) R.Br. – Orchidee des Jahres 2021 . Journal europäischer Orchideen : Mitteilungsblatt
des AHO Baden-Württemberg , 54(1–2), 3–27.'
bjps: 'Klüber M and Lohr M (2022) Das Kriechende Netzblatt Goodyera repens
(L.) R.Br. – Orchidee des Jahres 2021 . Journal europäischer Orchideen : Mitteilungsblatt
des AHO Baden-Württemberg 54, 3–27.'
chicago: 'Klüber, Marco, and Mathias Lohr. “Das Kriechende Netzblatt Goodyera repens
(L.) R.Br. – Orchidee des Jahres 2021 .” Journal europäischer Orchideen :
Mitteilungsblatt des AHO Baden-Württemberg 54, no. 1–2 (2022): 3–27.'
chicago-de: 'Klüber, Marco und Mathias Lohr. 2022. Das Kriechende Netzblatt Goodyera
repens (L.) R.Br. – Orchidee des Jahres 2021 . Journal europäischer Orchideen :
Mitteilungsblatt des AHO Baden-Württemberg 54, Nr. 1–2: 3–27.'
din1505-2-1: 'Klüber, Marco ; Lohr, Mathias: Das Kriechende Netzblatt
Goodyera repens (L.) R.Br. – Orchidee des Jahres 2021 . In: Journal europäischer
Orchideen : Mitteilungsblatt des AHO Baden-Württemberg Bd. 54. Stuttgart,
AHO (2022), Nr. 1–2, S. 3–27'
havard: 'M. Klüber, M. Lohr, Das Kriechende Netzblatt Goodyera repens (L.) R.Br.
– Orchidee des Jahres 2021 , Journal europäischer Orchideen : Mitteilungsblatt
des AHO Baden-Württemberg . 54 (2022) 3–27.'
ieee: 'M. Klüber and M. Lohr, “Das Kriechende Netzblatt Goodyera repens (L.) R.Br.
– Orchidee des Jahres 2021 ,” Journal europäischer Orchideen : Mitteilungsblatt
des AHO Baden-Württemberg , vol. 54, no. 1–2, pp. 3–27, 2022.'
mla: 'Klüber, Marco, and Mathias Lohr. “Das Kriechende Netzblatt Goodyera repens
(L.) R.Br. – Orchidee des Jahres 2021 .” Journal europäischer Orchideen :
Mitteilungsblatt des AHO Baden-Württemberg , vol. 54, no. 1–2, 2022, pp. 3–27.'
short: 'M. Klüber, M. Lohr, Journal europäischer Orchideen : Mitteilungsblatt des
AHO Baden-Württemberg 54 (2022) 3–27.'
ufg: 'Klüber, Marco/Lohr, Mathias: Das Kriechende Netzblatt Goodyera repens
(L.) R.Br. – Orchidee des Jahres 2021 , in: Journal europäischer Orchideen :
Mitteilungsblatt des AHO Baden-Württemberg 54 (2022), H. 1–2, S. 3–27.'
van: 'Klüber M, Lohr M. Das Kriechende Netzblatt Goodyera repens (L.) R.Br. – Orchidee
des Jahres 2021 . Journal europäischer Orchideen : Mitteilungsblatt des AHO Baden-Württemberg
. 2022;54(1–2):3–27.'
date_created: 2023-10-25T16:32:42Z
date_updated: 2024-04-02T12:38:21Z
ddc:
- '580'
department:
- _id: DEP9012
- _id: DEP1310
has_accepted_license: '1'
intvolume: ' 54'
issue: 1-2
keyword:
- Orchidaceae
- Goodyera repens
- Orchid of the Year 2021
- characteristics
- distribution
- life history
- monitoring
- threats
- conservation status
- protection
- Germany.
language:
- iso: ger
main_file_link:
- open_access: '1'
url: https://www.researchgate.net/publication/377571933_Das_Kriechende_Netzblatt_Goodyera_repens_L_R_Brown_-_Orchidee_des_Jahres_2021
oa: '1'
page: 3-27
place: Stuttgart
publication: 'Journal europäischer Orchideen : Mitteilungsblatt des AHO Baden-Württemberg '
publication_identifier:
issn:
- 0945-7909
publication_status: published
publisher: AHO
status: public
title: 'Das Kriechende Netzblatt Goodyera repens (L.) R.Br. – Orchidee des Jahres
2021 '
type: industry_journal_article
user_id: '83781'
volume: 54
year: '2022'
...
---
_id: '9207'
abstract:
- lang: eng
text: A new acceleration model for the reliability prediction of electrical connectors
has recently been published. This model enables the evaluation of failure rates
gained in highly accelerated life tests (HALT) and considers thermal and vibrational
loading. However, since the initial study only covered a small set of test parameters,
further study of the model is required. Previous studies have sufficiently investigated
the influence of the vibration test mode on the failure rate of electrical connectors.
Therefore, this study now focuses on the influence of the thermal cycling test.
A commonly used automotive connector is chosen and subjected to stresses in HALT
covering various upper temperatures, test durations and thermal cycling frequencies.
Additionally, the principles of determining the coefficient of temperature difference
and the coefficient of the thermal cycling frequency are presented, since these
coefficients are connector specific and required for the acceleration model. Based
on the numbers of failures in test, the influence of the various thermal cycling
tests is discussed, and the coefficients are calculated for the chosen connector.
In conclusion a guideline to select an appropriate upper temperature and test
duration in order to compare the reliability of different electrical connectors
is provided.
article_number: '114633'
author:
- first_name: Kevin
full_name: Krüger, Kevin
id: '76831'
last_name: Krüger
- first_name: Jian
full_name: Song, Jian
id: '5297'
last_name: Song
citation:
ama: 'Krüger K, Song J. The influence of thermal cycling test parameters on the
failure rate of electrical connectors. Microelectronics reliability : an internat
journal & world abstracting service. 2022;138(November 2022). doi:https://doi.org/10.1016/j.microrel.2022.114633'
apa: 'Krüger, K., & Song, J. (2022). The influence of thermal cycling test parameters
on the failure rate of electrical connectors. Microelectronics Reliability :
An Internat. Journal & World Abstracting Service, 138(November
2022), Article 114633. https://doi.org/10.1016/j.microrel.2022.114633'
bjps: 'Krüger K and Song J (2022) The Influence of Thermal Cycling Test Parameters
on the Failure Rate of Electrical Connectors. Microelectronics reliability :
an internat. journal & world abstracting service 138.'
chicago: 'Krüger, Kevin, and Jian Song. “The Influence of Thermal Cycling Test Parameters
on the Failure Rate of Electrical Connectors.” Microelectronics Reliability :
An Internat. Journal & World Abstracting Service 138, no. November 2022
(2022). https://doi.org/10.1016/j.microrel.2022.114633.'
chicago-de: 'Krüger, Kevin und Jian Song. 2022. The influence of thermal cycling
test parameters on the failure rate of electrical connectors. Microelectronics
reliability : an internat. journal & world abstracting service 138, Nr.
November 2022. doi:https://doi.org/10.1016/j.microrel.2022.114633,
.'
din1505-2-1: 'Krüger, Kevin ; Song, Jian: The influence of thermal cycling
test parameters on the failure rate of electrical connectors. In: Microelectronics
reliability : an internat. journal & world abstracting service Bd. 138.
Amsterdam, Elsevier (2022), Nr. November 2022'
havard: 'K. Krüger, J. Song, The influence of thermal cycling test parameters on
the failure rate of electrical connectors, Microelectronics Reliability : An Internat.
Journal & World Abstracting Service. 138 (2022).'
ieee: 'K. Krüger and J. Song, “The influence of thermal cycling test parameters
on the failure rate of electrical connectors,” Microelectronics reliability :
an internat. journal & world abstracting service, vol. 138, no. November
2022, Art. no. 114633, 2022, doi: https://doi.org/10.1016/j.microrel.2022.114633.'
mla: 'Krüger, Kevin, and Jian Song. “The Influence of Thermal Cycling Test Parameters
on the Failure Rate of Electrical Connectors.” Microelectronics Reliability :
An Internat. Journal & World Abstracting Service, vol. 138, no. November
2022, 114633, 2022, https://doi.org/10.1016/j.microrel.2022.114633.'
short: 'K. Krüger, J. Song, Microelectronics Reliability : An Internat. Journal
& World Abstracting Service 138 (2022).'
ufg: 'Krüger, Kevin/Song, Jian: The influence of thermal cycling test parameters
on the failure rate of electrical connectors, in: Microelectronics reliability :
an internat. journal & world abstracting service 138 (2022), H. November
2022.'
van: 'Krüger K, Song J. The influence of thermal cycling test parameters on the
failure rate of electrical connectors. Microelectronics reliability : an internat
journal & world abstracting service. 2022;138(November 2022).'
date_created: 2022-12-11T13:17:29Z
date_updated: 2024-08-05T07:33:56Z
department:
- _id: DEP6012
doi: https://doi.org/10.1016/j.microrel.2022.114633
intvolume: ' 138'
issue: November 2022
keyword:
- Electrical connectors
- Life test
- Thermal cycling
- Upper temperature Duration
- Temperature difference
- Cycling frequency
language:
- iso: eng
place: Amsterdam
publication: 'Microelectronics reliability : an internat. journal & world abstracting
service'
publication_identifier:
issn:
- 0026-2714
publication_status: published
publisher: Elsevier
status: public
title: The influence of thermal cycling test parameters on the failure rate of electrical
connectors
type: scientific_journal_article
user_id: '83781'
volume: 138
year: '2022'
...
---
_id: '9356'
abstract:
- lang: eng
text: In today’s manufacturing industry, enterprise-resource-planning (ERP) systems
reach their limit when planning and scheduling production subject to multiple
objectives and constraints. Advanced planning and scheduling (APS) systems provide
these capabilities and are an extension for ERP systems. However, when integrating
an APS and ERP system, the ERP data frequently lacks quality, hindering the APS
system from working as required. This paper introduces a data quality (DQ) assessment
framework that employs a Bayesian Network (BN) to perform quick DQ assessments
based on expert interviews and DQ measurements with actual ERP data. We explain
the BN’s functionality, design, and validation and show how using the perceived
DQ of experts and a semi-supervised learning algorithm improves the BN’s predictions
over time. We discuss applying our framework in an APS system implementation project
involving an APS system provider and a medium-sized manufacturer of hydraulic
cylinders. Despite considering the DQ assessment framework in such a specific
context, it is not restricted to a particular domain. We close by discussing the
framework’s limits, particularly the BN as a DQ assessment methodology and future
works to improve its performance.
author:
- first_name: Jan-Phillip
full_name: Herrmann, Jan-Phillip
id: '75846'
last_name: Herrmann
- first_name: Sven
full_name: Tackenberg, Sven
id: '71470'
last_name: Tackenberg
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Jörg
full_name: Hartlief, Jörg
last_name: Hartlief
- first_name: Jens
full_name: ' Rautenstengel, Jens'
last_name: ' Rautenstengel'
- first_name: Christine
full_name: Loeser, Christine
last_name: Loeser
- first_name: 'Jörg '
full_name: 'Böhme, Jörg '
last_name: Böhme
citation:
ama: Herrmann JP, Tackenberg S, Padoano E, et al. An ERP Data Quality Assessment
Framework for the Implementation of an APS system using Bayesian Networks. Procedia
Computer Science. 2022;200:194-204. doi:https://doi.org/10.1016/j.procs.2022.01.218
apa: Herrmann, J.-P., Tackenberg, S., Padoano, E., Hartlief, J., Rautenstengel,
J., Loeser, C., & Böhme, J. (2022). An ERP Data Quality Assessment Framework
for the Implementation of an APS system using Bayesian Networks. Procedia Computer
Science, 200, 194–204. https://doi.org/10.1016/j.procs.2022.01.218
bjps: Herrmann J-P et al. (2022) An ERP Data Quality Assessment Framework
for the Implementation of an APS System Using Bayesian Networks. Procedia Computer
Science 200, 194–204.
chicago: 'Herrmann, Jan-Phillip, Sven Tackenberg, Elio Padoano, Jörg Hartlief, Jens Rautenstengel,
Christine Loeser, and Jörg Böhme. “An ERP Data Quality Assessment Framework for
the Implementation of an APS System Using Bayesian Networks.” Procedia Computer
Science 200 (2022): 194–204. https://doi.org/10.1016/j.procs.2022.01.218.'
chicago-de: 'Herrmann, Jan-Phillip, Sven Tackenberg, Elio Padoano, Jörg Hartlief,
Jens Rautenstengel, Christine Loeser und Jörg Böhme. 2022. An ERP Data Quality
Assessment Framework for the Implementation of an APS system using Bayesian Networks.
Procedia Computer Science 200: 194–204. doi:https://doi.org/10.1016/j.procs.2022.01.218,
.'
din1505-2-1: 'Herrmann, Jan-Phillip
; Tackenberg, Sven ; Padoano,
Elio ; Hartlief, Jörg ; Rautenstengel, Jens ; Loeser,
Christine ; Böhme, Jörg :
An ERP Data Quality Assessment Framework for the Implementation of an APS system
using Bayesian Networks. In: Procedia Computer Science Bd. 200, Elsevier
(2022), S. 194–204'
havard: J.-P. Herrmann, S. Tackenberg, E. Padoano, J. Hartlief, J. Rautenstengel,
C. Loeser, J. Böhme, An ERP Data Quality Assessment Framework for the Implementation
of an APS system using Bayesian Networks, Procedia Computer Science. 200 (2022)
194–204.
ieee: 'J.-P. Herrmann et al., “An ERP Data Quality Assessment Framework for
the Implementation of an APS system using Bayesian Networks,” Procedia Computer
Science, vol. 200, pp. 194–204, 2022, doi: https://doi.org/10.1016/j.procs.2022.01.218.'
mla: Herrmann, Jan-Phillip, et al. “An ERP Data Quality Assessment Framework for
the Implementation of an APS System Using Bayesian Networks.” Procedia Computer
Science, vol. 200, 2022, pp. 194–204, https://doi.org/10.1016/j.procs.2022.01.218.
short: J.-P. Herrmann, S. Tackenberg, E. Padoano, J. Hartlief, J. Rautenstengel,
C. Loeser, J. Böhme, Procedia Computer Science 200 (2022) 194–204.
ufg: 'Herrmann, Jan-Phillip u. a.: An ERP Data Quality Assessment Framework
for the Implementation of an APS system using Bayesian Networks, in: Procedia
Computer Science 200 (2022), S. 194–204.'
van: Herrmann JP, Tackenberg S, Padoano E, Hartlief J, Rautenstengel J, Loeser
C, et al. An ERP Data Quality Assessment Framework for the Implementation of an
APS system using Bayesian Networks. Procedia Computer Science. 2022;200:194–204.
date_created: 2023-01-25T12:00:32Z
date_updated: 2024-08-06T11:45:41Z
department:
- _id: DEP7020
doi: https://doi.org/10.1016/j.procs.2022.01.218
intvolume: ' 200'
keyword:
- Data Quality Assessment
- Advanced Planning
- Scheduling
- Bayesian Network
- Enterprise Resource Planning
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.sciencedirect.com/science/article/pii/S1877050922002277
oa: '1'
page: 194-204
publication: Procedia Computer Science
publication_identifier:
issn:
- '1877-0509 '
publication_status: published
publisher: Elsevier
quality_controlled: '1'
status: public
title: An ERP Data Quality Assessment Framework for the Implementation of an APS system
using Bayesian Networks
type: journal_article
user_id: '83781'
volume: 200
year: '2022'
...
---
_id: '11290'
abstract:
- lang: eng
text: 'This paper aims to demonstrate and discuss how social media data may serve
to elucidate and determine landscape scenic values for planning purposes. Analysing
landscape perception by em-ploying social media data has the potential to be an
efficient and effective way of integrating infor-mation on public landscape perception
into planning practice. The paper presents a GIS-based approach to landscape quality
assessment that includes data harvested from social media. The approach was de-veloped
to be used for planning purposes at a variety of different scales. '
author:
- first_name: Lucas
full_name: Kaußen, Lucas
id: '52183'
last_name: Kaußen
- first_name: Boris
full_name: Stemmer, Boris
id: '64889'
last_name: Stemmer
- first_name: Franziska
full_name: Bernstein, Franziska
last_name: Bernstein
citation:
ama: Kaußen L, Stemmer B, Bernstein F. GIS-Landscape Quality Assessment Using Social
Media Data. Journal of Digital Landscape Architecture. 2021;6:295-305.
doi:10.14627/537705026
apa: Kaußen, L., Stemmer, B., & Bernstein, F. (2021). GIS-Landscape Quality
Assessment Using Social Media Data. Journal of Digital Landscape Architecture,
6, 295–305. https://doi.org/10.14627/537705026
bjps: Kaußen L, Stemmer B and Bernstein F (2021) GIS-Landscape Quality Assessment
Using Social Media Data. Journal of Digital Landscape Architecture 6,
295–305.
chicago: 'Kaußen, Lucas, Boris Stemmer, and Franziska Bernstein. “GIS-Landscape
Quality Assessment Using Social Media Data.” Journal of Digital Landscape Architecture
6 (2021): 295–305. https://doi.org/10.14627/537705026.'
chicago-de: 'Kaußen, Lucas, Boris Stemmer und Franziska Bernstein. 2021. GIS-Landscape
Quality Assessment Using Social Media Data. Journal of Digital Landscape Architecture
6: 295–305. doi:10.14627/537705026,
.'
din1505-2-1: 'Kaußen, Lucas ; Stemmer, Boris ; Bernstein,
Franziska: GIS-Landscape Quality Assessment Using Social Media Data. In:
Journal of Digital Landscape Architecture Bd. 6. Berlin, Wichmann Verlag
(2021), S. 295–305'
havard: L. Kaußen, B. Stemmer, F. Bernstein, GIS-Landscape Quality Assessment Using
Social Media Data, Journal of Digital Landscape Architecture. 6 (2021) 295–305.
ieee: 'L. Kaußen, B. Stemmer, and F. Bernstein, “GIS-Landscape Quality Assessment
Using Social Media Data,” Journal of Digital Landscape Architecture, vol.
6, pp. 295–305, 2021, doi: 10.14627/537705026.'
mla: Kaußen, Lucas, et al. “GIS-Landscape Quality Assessment Using Social Media
Data.” Journal of Digital Landscape Architecture, vol. 6, 2021, pp. 295–305,
https://doi.org/10.14627/537705026.
short: L. Kaußen, B. Stemmer, F. Bernstein, Journal of Digital Landscape Architecture
6 (2021) 295–305.
ufg: 'Kaußen, Lucas/Stemmer, Boris/Bernstein, Franziska: GIS-Landscape Quality
Assessment Using Social Media Data, in: Journal of Digital Landscape Architecture
6 (2021), S. 295–305.'
van: Kaußen L, Stemmer B, Bernstein F. GIS-Landscape Quality Assessment Using Social
Media Data. Journal of Digital Landscape Architecture. 2021;6:295–305.
conference:
end_date: 2021-05-28
location: Dessau; Köthen; Bernburg
name: '22. International Conference on Digital Landscape Architecture '
start_date: 2021-05-26
date_created: 2024-03-25T12:04:20Z
date_updated: 2024-12-04T14:40:56Z
department:
- _id: DEP9013
- _id: DEP1310
doi: 10.14627/537705026
intvolume: ' 6'
keyword:
- Landscape
- assessment
- social-media
- social-media-harvesting
- landscape scenic value
language:
- iso: eng
page: 295-305
place: Berlin
publication: Journal of Digital Landscape Architecture
publication_identifier:
eissn:
- '2511-624X '
isbn:
- 978-3-87907-705-2
issn:
- 2367-4253
publication_status: published
publisher: Wichmann Verlag
status: public
title: GIS-Landscape Quality Assessment Using Social Media Data
type: industry_journal_article
user_id: '83781'
volume: 6
year: '2021'
...
---
_id: '12239'
abstract:
- lang: eng
text: The modelling community has identified challenges for the integration and
assessment of lake models due to the diversity of modelling approaches and lakes.
In this study, we develop and assess a one-dimensional lake model and apply it
to 32 lakes from a global observatory network. The data set included lakes over
broad ranges in latitude, climatic zones, size, residence time, mixing regime
and trophic level. Model performance was evaluated using several error assessment
metrics, and a sensitivity analysis was conducted for nine parameters that governed
the surface heat exchange and mixing efficiency. There was low correlation between
input data uncertainty and model performance and predictions of temperature were
less sensitive to model parameters than prediction of thermocline depth and Schmidt
stability. The study provides guidance to where the general model approach and
associated assumptions work, and cases where adjustments to model parameterisations
and/or structure are required.
author:
- first_name: Louise C.
full_name: Bruce, Louise C.
last_name: Bruce
- first_name: Marieke A.
full_name: Frassl, Marieke A.
last_name: Frassl
- first_name: George B.
full_name: Arhonditsis, George B.
last_name: Arhonditsis
- first_name: Gideon
full_name: Gal, Gideon
last_name: Gal
- first_name: David P.
full_name: Hamilton, David P.
last_name: Hamilton
- first_name: Paul C.
full_name: Hanson, Paul C.
last_name: Hanson
- first_name: Amy L.
full_name: Hetherington, Amy L.
last_name: Hetherington
- first_name: John M.
full_name: Melack, John M.
last_name: Melack
- first_name: Jordan S.
full_name: Read, Jordan S.
last_name: Read
- first_name: Karsten
full_name: Rinke, Karsten
last_name: Rinke
- first_name: Anna
full_name: Rigosi, Anna
last_name: Rigosi
- first_name: Dennis
full_name: Trolle, Dennis
last_name: Trolle
- first_name: Luke
full_name: Winslow, Luke
last_name: Winslow
- first_name: Rita
full_name: Adrian, Rita
last_name: Adrian
- first_name: Ana I.
full_name: Ayala, Ana I.
last_name: Ayala
- first_name: Serghei A.
full_name: Bocaniov, Serghei A.
last_name: Bocaniov
- first_name: Bertram
full_name: Boehrer, Bertram
last_name: Boehrer
- first_name: Casper
full_name: Boon, Casper
last_name: Boon
- first_name: Justin D.
full_name: Brookes, Justin D.
last_name: Brookes
- first_name: Thomas
full_name: Bueche, Thomas
last_name: Bueche
- first_name: Brendan D.
full_name: Busch, Brendan D.
last_name: Busch
- first_name: Diego
full_name: Copetti, Diego
last_name: Copetti
- first_name: Alicia
full_name: Cortés, Alicia
last_name: Cortés
- first_name: Elvira
full_name: de Eyto, Elvira
last_name: de Eyto
- first_name: J. Alex
full_name: Elliott, J. Alex
last_name: Elliott
- first_name: Nicole
full_name: Gallina, Nicole
last_name: Gallina
- first_name: Yael
full_name: Gilboa, Yael
last_name: Gilboa
- first_name: Nicolas
full_name: Guyennon, Nicolas
last_name: Guyennon
- first_name: Lei
full_name: Huang, Lei
last_name: Huang
- first_name: Onur
full_name: Kerimoglu, Onur
last_name: Kerimoglu
- first_name: John D.
full_name: Lenters, John D.
last_name: Lenters
- first_name: Sally
full_name: MacIntyre, Sally
last_name: MacIntyre
- first_name: Vardit
full_name: Makler-Pick, Vardit
last_name: Makler-Pick
- first_name: Chris G.
full_name: McBride, Chris G.
last_name: McBride
- first_name: Santiago
full_name: Moreira, Santiago
last_name: Moreira
- first_name: Deniz
full_name: Özkundakci, Deniz
last_name: Özkundakci
- first_name: Marco
full_name: Pilotti, Marco
last_name: Pilotti
- first_name: Francisco J.
full_name: Rueda, Francisco J.
last_name: Rueda
- first_name: James A.
full_name: Rusak, James A.
last_name: Rusak
- first_name: Nihar R.
full_name: Samal, Nihar R.
last_name: Samal
- first_name: Martin
full_name: Schmid, Martin
last_name: Schmid
- first_name: Tom
full_name: Shatwell, Tom
id: '86424'
last_name: Shatwell
orcid: 0000-0002-4520-7916
- first_name: Craig
full_name: Snorthheim, Craig
last_name: Snorthheim
- first_name: Frédéric
full_name: Soulignac, Frédéric
last_name: Soulignac
- first_name: Giulia
full_name: Valerio, Giulia
last_name: Valerio
- first_name: Leon
full_name: van der Linden, Leon
last_name: van der Linden
- first_name: Mark
full_name: Vetter, Mark
last_name: Vetter
- first_name: Brigitte
full_name: Vinçon-Leite, Brigitte
last_name: Vinçon-Leite
- first_name: Junbo
full_name: Wang, Junbo
last_name: Wang
- first_name: Michael
full_name: Weber, Michael
last_name: Weber
- first_name: Chaturangi
full_name: Wickramaratne, Chaturangi
last_name: Wickramaratne
- first_name: R. Iestyn
full_name: Woolway, R. Iestyn
last_name: Woolway
- first_name: Huaxia
full_name: Yao, Huaxia
last_name: Yao
- first_name: Matthew R.
full_name: Hipsey, Matthew R.
last_name: Hipsey
citation:
ama: 'Bruce LC, Frassl MA, Arhonditsis GB, et al. A multi-lake comparative analysis
of the General Lake Model (GLM): Stress-testing across a global observatory network.
Environmental modelling & software with environment data news . 2018;102(4):274-291.
doi:10.1016/j.envsoft.2017.11.016'
apa: 'Bruce, L. C., Frassl, M. A., Arhonditsis, G. B., Gal, G., Hamilton, D. P.,
Hanson, P. C., Hetherington, A. L., Melack, J. M., Read, J. S., Rinke, K., Rigosi,
A., Trolle, D., Winslow, L., Adrian, R., Ayala, A. I., Bocaniov, S. A., Boehrer,
B., Boon, C., Brookes, J. D., … Hipsey, M. R. (2018). A multi-lake comparative
analysis of the General Lake Model (GLM): Stress-testing across a global observatory
network. Environmental Modelling & Software with Environment Data News
, 102(4), 274–291. https://doi.org/10.1016/j.envsoft.2017.11.016'
bjps: 'Bruce LC et al. (2018) A Multi-Lake Comparative Analysis of
the General Lake Model (GLM): Stress-Testing across a Global Observatory Network.
Environmental modelling & software with environment data news 102,
274–291.'
chicago: 'Bruce, Louise C., Marieke A. Frassl, George B. Arhonditsis, Gideon Gal,
David P. Hamilton, Paul C. Hanson, Amy L. Hetherington, et al. “A Multi-Lake Comparative
Analysis of the General Lake Model (GLM): Stress-Testing across a Global Observatory
Network.” Environmental Modelling & Software with Environment Data News
102, no. 4 (2018): 274–91. https://doi.org/10.1016/j.envsoft.2017.11.016.'
chicago-de: 'Bruce, Louise C., Marieke A. Frassl, George B. Arhonditsis, Gideon
Gal, David P. Hamilton, Paul C. Hanson, Amy L. Hetherington, u. a. 2018. A multi-lake
comparative analysis of the General Lake Model (GLM): Stress-testing across a
global observatory network. Environmental modelling & software with environment
data news 102, Nr. 4: 274–291. doi:10.1016/j.envsoft.2017.11.016,
.'
din1505-2-1: 'Bruce,
Louise C. ; Frassl, Marieke A.
; Arhonditsis, George B. ; Gal, Gideon ; Hamilton,
David P. ; Hanson, Paul C.
; Hetherington, Amy L. ; Melack,
John M. ; u. a.: A multi-lake comparative analysis of the General
Lake Model (GLM): Stress-testing across a global observatory network. In: Environmental
modelling & software with environment data news Bd. 102. Oxford, Elsevier
Science (2018), Nr. 4, S. 274–291'
havard: 'L.C. Bruce, M.A. Frassl, G.B. Arhonditsis, G. Gal, D.P. Hamilton, P.C.
Hanson, A.L. Hetherington, J.M. Melack, J.S. Read, K. Rinke, A. Rigosi, D. Trolle,
L. Winslow, R. Adrian, A.I. Ayala, S.A. Bocaniov, B. Boehrer, C. Boon, J.D. Brookes,
T. Bueche, B.D. Busch, D. Copetti, A. Cortés, E. de Eyto, J.A. Elliott, N. Gallina,
Y. Gilboa, N. Guyennon, L. Huang, O. Kerimoglu, J.D. Lenters, S. MacIntyre, V.
Makler-Pick, C.G. McBride, S. Moreira, D. Özkundakci, M. Pilotti, F.J. Rueda,
J.A. Rusak, N.R. Samal, M. Schmid, T. Shatwell, C. Snorthheim, F. Soulignac, G.
Valerio, L. van der Linden, M. Vetter, B. Vinçon-Leite, J. Wang, M. Weber, C.
Wickramaratne, R.I. Woolway, H. Yao, M.R. Hipsey, A multi-lake comparative analysis
of the General Lake Model (GLM): Stress-testing across a global observatory network,
Environmental Modelling & Software with Environment Data News . 102 (2018)
274–291.'
ieee: 'L. C. Bruce et al., “A multi-lake comparative analysis of the General
Lake Model (GLM): Stress-testing across a global observatory network,” Environmental
modelling & software with environment data news , vol. 102, no. 4, pp.
274–291, 2018, doi: 10.1016/j.envsoft.2017.11.016.'
mla: 'Bruce, Louise C., et al. “A Multi-Lake Comparative Analysis of the General
Lake Model (GLM): Stress-Testing across a Global Observatory Network.” Environmental
Modelling & Software with Environment Data News , vol. 102, no. 4, 2018,
pp. 274–91, https://doi.org/10.1016/j.envsoft.2017.11.016.'
short: L.C. Bruce, M.A. Frassl, G.B. Arhonditsis, G. Gal, D.P. Hamilton, P.C. Hanson,
A.L. Hetherington, J.M. Melack, J.S. Read, K. Rinke, A. Rigosi, D. Trolle, L.
Winslow, R. Adrian, A.I. Ayala, S.A. Bocaniov, B. Boehrer, C. Boon, J.D. Brookes,
T. Bueche, B.D. Busch, D. Copetti, A. Cortés, E. de Eyto, J.A. Elliott, N. Gallina,
Y. Gilboa, N. Guyennon, L. Huang, O. Kerimoglu, J.D. Lenters, S. MacIntyre, V.
Makler-Pick, C.G. McBride, S. Moreira, D. Özkundakci, M. Pilotti, F.J. Rueda,
J.A. Rusak, N.R. Samal, M. Schmid, T. Shatwell, C. Snorthheim, F. Soulignac, G.
Valerio, L. van der Linden, M. Vetter, B. Vinçon-Leite, J. Wang, M. Weber, C.
Wickramaratne, R.I. Woolway, H. Yao, M.R. Hipsey, Environmental Modelling &
Software with Environment Data News 102 (2018) 274–291.
ufg: 'Bruce, Louise C. u. a.: A multi-lake comparative analysis of the General
Lake Model (GLM): Stress-testing across a global observatory network, in: Environmental
modelling & software with environment data news 102 (2018), H. 4, S.
274–291.'
van: 'Bruce LC, Frassl MA, Arhonditsis GB, Gal G, Hamilton DP, Hanson PC, et al.
A multi-lake comparative analysis of the General Lake Model (GLM): Stress-testing
across a global observatory network. Environmental modelling & software with
environment data news . 2018;102(4):274–91.'
date_created: 2024-12-08T20:32:07Z
date_updated: 2024-12-09T10:13:47Z
department:
- _id: DEP8022
doi: 10.1016/j.envsoft.2017.11.016
extern: '1'
intvolume: ' 102'
issue: '4'
keyword:
- Lake model
- Stratification
- GLM
- Model assessment
- Global observatory data
- Network science
language:
- iso: eng
main_file_link:
- url: https://doi.org/10.1016/j.envsoft.2017.11.016
page: 274-291
place: Oxford
publication: 'Environmental modelling & software with environment data news '
publication_identifier:
eissn:
- 1873-6726
issn:
- 1364-8152
publication_status: published
publisher: Elsevier Science
quality_controlled: '1'
status: public
title: 'A multi-lake comparative analysis of the General Lake Model (GLM): Stress-testing
across a global observatory network'
type: scientific_journal_article
user_id: '83781'
volume: 102
year: '2018'
...
---
_id: '588'
abstract:
- lang: eng
text: "While common measurement techniques like gloss or color measurement are widely
used in industry for quality assessment of furniture high gloss surfaces, they
indicate only a weak correlation to the quality perceived by the customer. Topography
based approaches achieve higher correlation to human perception but are often
based on linear measurement which cannot be applied for an overall assessment
of larger surfaces. Thus an algorithm was developed to calculate a specific value
based on topographic features, such as orange peel, within the research project
‘Development of a comprehensive quality concept for furniture high gloss surfaces’,
funded by the federal Ministry of Education and Research. For the evaluation of
short waved structures on furniture high gloss surfaces the ratio of hill height
to hill area was chosen. This parameter proves to be applicable for an evaluation
of the extent of a single.\r\n"
author:
- first_name: Andrea
full_name: Huxol, Andrea
id: '43559'
last_name: Huxol
- first_name: Adrian
full_name: Riegel, Adrian
id: '14647'
last_name: Riegel
- first_name: Kerstin
full_name: Dekomien, Kerstin
id: '59843'
last_name: Dekomien
citation:
ama: 'Huxol A, Riegel A, Dekomien K. Development of an Algorithm for Measuring the
Quality of High Gloss Surfaces Correlated to Human Perception. In: Padoano E,
Villmer F-J, Department of Production Engineering and Management, eds. Production
Engineering and Management. Lemgo; 2015:99-110.'
apa: Huxol, A., Riegel, A., & Dekomien, K. (2015). Development of an Algorithm
for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception.
In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management
(Eds.), Production Engineering and Management (pp. 99–110). Lemgo.
bjps: Huxol A, Riegel A and Dekomien K (2015) Development of an Algorithm
for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception.
In Padoano E, Villmer F-J and Department of Production Engineering and Management
(eds), Production Engineering and Management. Lemgo, pp. 99–110.
chicago: Huxol, Andrea, Adrian Riegel, and Kerstin Dekomien. “Development of an
Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human
Perception.” In Production Engineering and Management, edited by Elio Padoano,
Franz-Josef Villmer, and Department of Production Engineering and Management,
99–110. Lemgo, 2015.
chicago-de: 'Huxol, Andrea, Adrian Riegel und Kerstin Dekomien. 2015. Development
of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to
Human Perception. In: Production Engineering and Management, hg. von Elio
Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management,
99–110. Lemgo.'
din1505-2-1: 'Huxol, Andrea ; Riegel, Adrian ; Dekomien,
Kerstin: Development of an Algorithm for Measuring the Quality of High
Gloss Surfaces Correlated to Human Perception. In: Padoano,
E. ; Villmer, F.-J. ; Department of Production Engineering and Management
(Hrsg.): Production Engineering and Management. Lemgo, 2015, S. 99–110'
havard: 'A. Huxol, A. Riegel, K. Dekomien, Development of an Algorithm for Measuring
the Quality of High Gloss Surfaces Correlated to Human Perception, in: E. Padoano,
F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production
Engineering and Management, Lemgo, 2015: pp. 99–110.'
ieee: A. Huxol, A. Riegel, and K. Dekomien, “Development of an Algorithm for Measuring
the Quality of High Gloss Surfaces Correlated to Human Perception,” in Production
Engineering and Management, Trieste, Italy, 2015, no. 1, pp. 99–110.
mla: Huxol, Andrea, et al. “Development of an Algorithm for Measuring the Quality
of High Gloss Surfaces Correlated to Human Perception.” Production Engineering
and Management, edited by Elio Padoano et al., no. 1, 2015, pp. 99–110.
short: 'A. Huxol, A. Riegel, K. Dekomien, in: E. Padoano, F.-J. Villmer, Department
of Production Engineering and Management (Eds.), Production Engineering and Management,
Lemgo, 2015, pp. 99–110.'
ufg: 'Huxol, Andrea et. al. (2015): Development of an Algorithm for Measuring
the Quality of High Gloss Surfaces Correlated to Human Perception, in: Elio Padoano
et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 99–110.'
van: 'Huxol A, Riegel A, Dekomien K. Development of an Algorithm for Measuring the
Quality of High Gloss Surfaces Correlated to Human Perception. In: Padoano E,
Villmer F-J, Department of Production Engineering and Management, editors. Production
Engineering and Management. Lemgo; 2015. p. 99–110.'
conference:
end_date: 2015-10-02
location: Trieste, Italy
name: Proceedings5th International Conference
start_date: 2015-10-01
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-18T15:13:34Z
date_updated: 2023-03-15T13:50:02Z
department:
- _id: DEP1306
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
issue: '1'
keyword:
- High gloss
- surface measurement
- topographic features
- quality assessment
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf
oa: '1'
page: 99-110
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-941645-11-0
publication_status: published
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf
status: public
title: Development of an Algorithm for Measuring the Quality of High Gloss Surfaces
Correlated to Human Perception
type: conference
user_id: '45673'
year: 2015
...
---
_id: '598'
abstract:
- lang: eng
text: "The aerospace sector is characterized by long product life cycles and a need
for lightweight design. Additive manufacturing is a technology that produces parts
layer by layer and thus enables the manufacturing of any complex parts at nearly
no extra costs. A topology optimization enhances the part’s\r\nperformance for
their special purpose. The results are often complex bionic structures that cannot
be produced with conventional manufacturing technologies. The paper analyzes how
the high potential of this technologycan be applied to aerospace parts. A topology
optimization will be conducted for an aircraft part explaining the crucial points
and a life cycle analysis examines the achieved sustainable improvements for the
aircraft’s life cycle.\r\n"
author:
- first_name: Andrea
full_name: Huxol, Andrea
id: '43559'
last_name: Huxol
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
id: '14290'
last_name: Villmer
citation:
ama: 'Huxol A, Villmer F-J. Hybrid Manufacturing Machines: Combining Additive and
Subtractive Manufacturing Technologies. In: Padoano E, Villmer F-J, Department
of Production Engineering and Management, eds. Production Engineering and Management.
Lemgo; 2015:207-218.'
apa: 'Huxol, A., & Villmer, F.-J. (2015). Hybrid Manufacturing Machines: Combining
Additive and Subtractive Manufacturing Technologies. In E. Padoano, F.-J. Villmer,
& Department of Production Engineering and Management (Eds.), Production
Engineering and Management (pp. 207–218). Lemgo.'
bjps: 'Huxol A and Villmer F-J (2015) Hybrid Manufacturing Machines: Combining
Additive and Subtractive Manufacturing Technologies. In Padoano E, Villmer F-J
and Department of Production Engineering and Management (eds), Production Engineering
and Management. Lemgo, pp. 207–218.'
chicago: 'Huxol, Andrea, and Franz-Josef Villmer. “Hybrid Manufacturing Machines:
Combining Additive and Subtractive Manufacturing Technologies.” In Production
Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and
Department of Production Engineering and Management, 207–18. Lemgo, 2015.'
chicago-de: 'Huxol, Andrea und Franz-Josef Villmer. 2015. Hybrid Manufacturing Machines:
Combining Additive and Subtractive Manufacturing Technologies. In: Production
Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und
Department of Production Engineering and Management, 207–218. Lemgo.'
din1505-2-1: 'Huxol, Andrea ; Villmer, Franz-Josef: Hybrid Manufacturing
Machines: Combining Additive and Subtractive Manufacturing Technologies. In: Padoano, E. ; Villmer,
F.-J. ; Department of Production
Engineering and Management (Hrsg.): Production Engineering and Management.
Lemgo, 2015, S. 207–218'
havard: 'A. Huxol, F.-J. Villmer, Hybrid Manufacturing Machines: Combining Additive
and Subtractive Manufacturing Technologies, in: E. Padoano, F.-J. Villmer, Department
of Production Engineering and Management (Eds.), Production Engineering and Management,
Lemgo, 2015: pp. 207–218.'
ieee: 'A. Huxol and F.-J. Villmer, “Hybrid Manufacturing Machines: Combining Additive
and Subtractive Manufacturing Technologies,” in Production Engineering and
Management, Trieste, Italy, 2015, no. 1, pp. 207–218.'
mla: 'Huxol, Andrea, and Franz-Josef Villmer. “Hybrid Manufacturing Machines: Combining
Additive and Subtractive Manufacturing Technologies.” Production Engineering
and Management, edited by Elio Padoano et al., no. 1, 2015, pp. 207–18.'
short: 'A. Huxol, F.-J. Villmer, in: E. Padoano, F.-J. Villmer, Department of Production
Engineering and Management (Eds.), Production Engineering and Management, Lemgo,
2015, pp. 207–218.'
ufg: 'Huxol, Andrea/Villmer, Franz-Josef (2015): Hybrid Manufacturing Machines:
Combining Additive and Subtractive Manufacturing Technologies, in: Elio Padoano
et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 207–218.'
van: 'Huxol A, Villmer F-J. Hybrid Manufacturing Machines: Combining Additive and
Subtractive Manufacturing Technologies. In: Padoano E, Villmer F-J, Department
of Production Engineering and Management, editors. Production Engineering and
Management. Lemgo; 2015. p. 207–18.'
conference:
end_date: 2015-10-02
location: Trieste, Italy
name: Proceedings5th International Conference
start_date: 2015-10-01
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-19T07:26:35Z
date_updated: 2023-03-15T13:50:03Z
department:
- _id: DEP1306
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
issue: '1'
keyword:
- Additive manufacturing
- topology optimization
- aerospace
- life cycle costs
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf
oa: '1'
page: 207-218
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-941645-11-0
publication_status: published
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf
status: public
title: 'Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing
Technologies'
type: conference
user_id: '45673'
year: 2015
...
---
_id: '2505'
abstract:
- lang: eng
text: Das DIW Berlin rechnet für 2010 und 2011 mit einem Wachstum des realen Bruttoinlandsprodukts
von 1,7 und 1,8 Prozent. Damit setzt die deutsche Wirtschaft ihren moderaten Erholungskurs
der vergangenen Quartale fort. Zwar hat die Produktion im Winter überraschenderweise
nur stagniert, dies ist aber auf Sondereffekte etwa im Zusammenhang mit den Konjunkturprogrammen
zurückzuführen. Angesichts des moderaten Wachstumstempos wird die Wirtschaftskraft
am Ende des Prognosezeitraums 2011 nur noch leicht unter dem Vorkrisenniveau liegen.
Getrieben wird die leichte Erholung der Konjunktur 2010 größtenteils von der Auslandsnachfrage;
rund zwei Drittel der Zunahme der Produktion dürften aus der Verbesserung des
Außenbeitrags kommen. 2011 ist dagegen die Binnennachfrage der stärkste Wachstumstreiber.
Während der private Konsum 2010 aufgrund der vorhandenen Arbeitsplatzunsicherheit
und niedriger Lohnabschlüsse noch schwach bleibt, ist 2011 mit einem Zuwachs von
einem Prozent zu rechnen. Der massive Rückgang der Wirtschaftsleistung 2009 hat
sich weit weniger als befürchtet auf die Entwicklung der Beschäftigung ausgewirkt.
Der wichtigste Grund dafür war, dass die Krise weitgehend auf den Exportsektor
begrenzt blieb. Derzeit spricht viel dafür, dass die Talsohle auf dem Arbeitsmarkt
bereits durchschritten ist und sich sogar ein leichter Rückgang der Arbeitslosigkeit
einstellen wird. Mit einem kräftigen Aufschwung bei der Beschäftigung ist allerdings
nicht zu rechnen. Zwar liegt das Wachstum im Prognosezeitraum über der Schwelle,
ab der Beschäftigung aufgebaut wird, der vorherige Absturz der Produktion steht
aber einem deutlichen Zuwachs der Beschäftigung entgegen. Die Lage der öffentlichen
Haushalte bleibt hochgradig angespannt. Tatsächlich ist 2010 und 2011 eher mit
geringeren Steuereinnahmen zu rechnen, als dies noch zur Jahreswende prognostiziert
worden war. Dadurch wird die Konsolidierung der öffentlichen Finanzen nochmals
erschwert, sodass kein Spielraum für Steuersenkungen best
author:
- first_name: Christian
full_name: Dreger, Christian
last_name: Dreger
- first_name: Ansgar
full_name: Belke, Ansgar
last_name: Belke
- first_name: Kerstin
full_name: Bernoth, Kerstin
last_name: Bernoth
- first_name: Korbinian
full_name: von Blanckenburg, Korbinian
id: '58841'
last_name: von Blanckenburg
- first_name: Franziska
full_name: Bremus, Franziska
last_name: Bremus
- first_name: Karl
full_name: Brenke, Karl
last_name: Brenke
- first_name: Roberta
full_name: Colavecchio, Roberta
last_name: Colavecchio
- first_name: Ferdinand
full_name: Fichtner, Ferdinand
last_name: Fichtner
- first_name: Hendrik
full_name: Hagedorn, Hendrik
last_name: Hagedorn
- first_name: Vladimir
full_name: Kuzin, Vladimir
last_name: Kuzin
citation:
ama: Dreger C, Belke A, Bernoth K, et al. Frühjahrsgrundlinien 2010. DIW Wochenbericht.
2010;77(15):2-26.
apa: Dreger, C., Belke, A., Bernoth, K., von Blanckenburg, K., Bremus, F., Brenke,
K., … Kuzin, V. (2010). Frühjahrsgrundlinien 2010. DIW Wochenbericht, 77(15),
2–26.
bjps: Dreger C et al. (2010) Frühjahrsgrundlinien 2010. DIW Wochenbericht
77, 2–26.
chicago: 'Dreger, Christian, Ansgar Belke, Kerstin Bernoth, Korbinian von Blanckenburg,
Franziska Bremus, Karl Brenke, Roberta Colavecchio, Ferdinand Fichtner, Hendrik
Hagedorn, and Vladimir Kuzin. “Frühjahrsgrundlinien 2010.” DIW Wochenbericht
77, no. 15 (2010): 2–26.'
chicago-de: 'Dreger, Christian, Ansgar Belke, Kerstin Bernoth, Korbinian von Blanckenburg,
Franziska Bremus, Karl Brenke, Roberta Colavecchio, Ferdinand Fichtner, Hendrik
Hagedorn und Vladimir Kuzin. 2010. Frühjahrsgrundlinien 2010. DIW Wochenbericht
77, Nr. 15: 2–26.'
din1505-2-1: 'Dreger,
Christian ; Belke, Ansgar
; Bernoth, Kerstin ; von
Blanckenburg, Korbinian ; Bremus,
Franziska ; Brenke, Karl
; Colavecchio, Roberta ; Fichtner,
Ferdinand ; u. a.: Frühjahrsgrundlinien 2010. In: DIW Wochenbericht
Bd. 77. Berlin, Deutsches Institut für Wirtschaftsforschung e.V. (DIW Berlin)
(2010), Nr. 15, S. 2–26'
havard: C. Dreger, A. Belke, K. Bernoth, K. von Blanckenburg, F. Bremus, K. Brenke,
R. Colavecchio, F. Fichtner, H. Hagedorn, V. Kuzin, Frühjahrsgrundlinien 2010,
DIW Wochenbericht. 77 (2010) 2–26.
ieee: C. Dreger et al., “Frühjahrsgrundlinien 2010,” DIW Wochenbericht,
vol. 77, no. 15, pp. 2–26, 2010.
mla: Dreger, Christian, et al. “Frühjahrsgrundlinien 2010.” DIW Wochenbericht,
vol. 77, no. 15, Deutsches Institut für Wirtschaftsforschung e.V. (DIW Berlin),
2010, pp. 2–26.
short: C. Dreger, A. Belke, K. Bernoth, K. von Blanckenburg, F. Bremus, K. Brenke,
R. Colavecchio, F. Fichtner, H. Hagedorn, V. Kuzin, DIW Wochenbericht 77 (2010)
2–26.
ufg: 'Dreger, Christian et. al. (2010): Frühjahrsgrundlinien 2010, in: DIW
Wochenbericht 77 (15), S. 2–26.'
van: Dreger C, Belke A, Bernoth K, von Blanckenburg K, Bremus F, Brenke K, et al.
Frühjahrsgrundlinien 2010. DIW Wochenbericht. 2010;77(15):2–26.
date_created: 2020-05-24T10:15:05Z
date_updated: 2023-03-15T13:49:40Z
department:
- _id: DEP7034
intvolume: ' 77'
issue: '15'
keyword:
- Business Cycle forecast
- Economic Outlook
language:
- iso: ger
main_file_link:
- open_access: '1'
url: https://www.diw.de/de/diw_01.c.454436.de/publikationen/wochenberichte/2010_15_1/fruehjahrsgrundlinien_2010.html
oa: '1'
page: 2-26
place: Berlin
publication: DIW Wochenbericht
publication_identifier:
issn:
- 1860-8787
publication_status: published
publisher: Deutsches Institut für Wirtschaftsforschung e.V. (DIW Berlin)
status: public
title: Frühjahrsgrundlinien 2010
type: journal_article
user_id: '15514'
volume: 77
year: 2010
...
---
_id: '8176'
abstract:
- lang: eng
text: The main aim of this EU demonstration project was to test two new sanitation
concepts to determine if these concepts are more sustainable, compared with the
conventional sanitation system, particularly with regard to nutrient recycling.
Two different sanitation concepts were tested. One concept comprised the use of
gravity separation toilets, the other used vacuum separation toilets. Results
from a life-cycle-assessment investigation show that the new sanitation concepts
are more sustainable. A cost analysis for an existing residential area did not
prove lower costs for the new sanitation concepts in this special case. The experience
from this demonstration project shows that prior to a widespread use of the new
sanitation concepts, several improvements have to be made. One important issue
is the improvement of separation toilets. Since nutrient recycling, water saving
and reuse as well energy reduction become more and more important, further research
should be undertaken in this field.
author:
- first_name: Anton
full_name: Peter-Fröhlich, Anton
last_name: Peter-Fröhlich
- first_name: Ludwig
full_name: Pawlowski, Ludwig
last_name: Pawlowski
- first_name: Andre
full_name: Bonhomme, Andre
last_name: Bonhomme
- first_name: Martin
full_name: Oldenburg, Martin
id: '11354'
last_name: Oldenburg
citation:
ama: 'Peter-Fröhlich A, Pawlowski L, Bonhomme A, Oldenburg M. EU Demonstration project
for separate discharge and treatment of urine, faeces and greywater - Part I:
Results. Water Science & Technology . 2007;56(5):239-249. doi: https://doi.org/10.2166/wst.2007.577'
apa: 'Peter-Fröhlich, A., Pawlowski, L., Bonhomme, A., & Oldenburg, M. (2007).
EU Demonstration project for separate discharge and treatment of urine, faeces
and greywater - Part I: Results. Water Science & Technology , 56(5),
239–249. https://doi.org/
https://doi.org/10.2166/wst.2007.577'
bjps: 'Peter-Fröhlich A et al. (2007) EU Demonstration Project for
Separate Discharge and Treatment of Urine, Faeces and Greywater - Part I: Results.
Water Science & Technology 56, 239–249.'
chicago: 'Peter-Fröhlich, Anton, Ludwig Pawlowski, Andre Bonhomme, and Martin Oldenburg.
“EU Demonstration Project for Separate Discharge and Treatment of Urine, Faeces
and Greywater - Part I: Results.” Water Science & Technology 56, no.
5 (2007): 239–49. https://doi.org/
https://doi.org/10.2166/wst.2007.577.'
chicago-de: 'Peter-Fröhlich, Anton, Ludwig Pawlowski, Andre Bonhomme und Martin
Oldenburg. 2007. EU Demonstration project for separate discharge and treatment
of urine, faeces and greywater - Part I: Results. Water Science & Technology
56, Nr. 5: 239–249. doi:
https://doi.org/10.2166/wst.2007.577, .'
din1505-2-1: 'Peter-Fröhlich, Anton
; Pawlowski, Ludwig ; Bonhomme,
Andre ; Oldenburg, Martin:
EU Demonstration project for separate discharge and treatment of urine, faeces
and greywater - Part I: Results. In: Water Science & Technology Bd.
56. Bristol , IWA (2007), Nr. 5, S. 239–249'
havard: 'A. Peter-Fröhlich, L. Pawlowski, A. Bonhomme, M. Oldenburg, EU Demonstration
project for separate discharge and treatment of urine, faeces and greywater -
Part I: Results, Water Science & Technology . 56 (2007) 239–249.'
ieee: 'A. Peter-Fröhlich, L. Pawlowski, A. Bonhomme, and M. Oldenburg, “EU Demonstration
project for separate discharge and treatment of urine, faeces and greywater -
Part I: Results,” Water Science & Technology , vol. 56, no. 5, pp.
239–249, 2007, doi:
https://doi.org/10.2166/wst.2007.577.'
mla: 'Peter-Fröhlich, Anton, et al. “EU Demonstration Project for Separate Discharge
and Treatment of Urine, Faeces and Greywater - Part I: Results.” Water Science
& Technology , vol. 56, no. 5, 2007, pp. 239–49, https://doi.org/ https://doi.org/10.2166/wst.2007.577.'
short: A. Peter-Fröhlich, L. Pawlowski, A. Bonhomme, M. Oldenburg, Water Science
& Technology 56 (2007) 239–249.
ufg: 'Peter-Fröhlich, Anton u. a.: EU Demonstration project for separate
discharge and treatment of urine, faeces and greywater - Part I: Results, in:
Water Science & Technology 56 (2007), H. 5, S. 239–249.'
van: 'Peter-Fröhlich A, Pawlowski L, Bonhomme A, Oldenburg M. EU Demonstration project
for separate discharge and treatment of urine, faeces and greywater - Part I:
Results. Water Science & Technology . 2007;56(5):239–49.'
date_created: 2022-05-11T20:08:01Z
date_updated: 2026-07-24T12:45:07Z
department:
- _id: DEP8010
doi: ' https://doi.org/10.2166/wst.2007.577'
extern: '1'
intvolume: ' 56'
issue: '5'
keyword:
- Cost calculation
- fertiliser
- gravity separation toilets
- life-cycle-assessment
- thermophile digester
- urine treatment
- vacuum separation toilets
language:
- iso: eng
page: 239-249
place: ' Bristol '
publication: 'Water Science & Technology '
publication_identifier:
eissn:
- 1996-9732
issn:
- 0273-1223
publication_status: published
publisher: IWA
quality_controlled: '1'
status: public
title: 'EU Demonstration project for separate discharge and treatment of urine, faeces
and greywater - Part I: Results'
type: scientific_journal_article
user_id: '83781'
volume: 56
year: '2007'
...