---
_id: '11972'
abstract:
- lang: eng
text: As companies increasingly adopt software applications to improve business
efficiency, often digitization gaps arise when legacy systems fail to integrate
with new applications. These gaps often result in redundant task execution across
incompatible systems. Robotic Process Automation (RPA) emerges as a solution by
automating such tasks. However, selecting the right processes that will be subjected
to RPA is crucial to avoid failures and resource waste. Therefore, this paper
introduces a four-stage method to evaluate processes for RPA suitability, grounded
on the Analytic Hierarchy Process (AHP). By systematically analyzing scientific
literature and incorporating weights from RPA experts, this paper sheds light
on the complex nature of process selection criteria for RPA. Tested in a company,
the method facilitates the process selection, indicating its practical applicability.
author:
- first_name: Frederic
full_name: Meyer, Frederic
id: '70963'
last_name: Meyer
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
citation:
ama: Meyer F, Hinrichsen S, Padoano E. A Structured Method for the Selection
of Business Processes Suitable for Robotic Process Automation. Vol 158. (Ahram
T, Karwowski W, Etinger D, Mijač T, eds.). AHFE International; 2024. doi:10.54941/ahfe1005524
apa: 'Meyer, F., Hinrichsen, S., & Padoano, E. (2024). A Structured Method for
the Selection of Business Processes Suitable for Robotic Process Automation. In
T. Ahram, W. Karwowski, D. Etinger, & T. Mijač (Eds.), Human Systems Engineering
and Design (IHSED2024): Future Trends and Applications (Vol. 158). AHFE International.
https://doi.org/10.54941/ahfe1005524'
bjps: 'Meyer F, Hinrichsen S and Padoano E (2024) A Structured Method
for the Selection of Business Processes Suitable for Robotic Process Automation,
Ahram T et al. (eds). New York,NY: AHFE International.'
chicago: 'Meyer, Frederic, Sven Hinrichsen, and Elio Padoano. A Structured Method
for the Selection of Business Processes Suitable for Robotic Process Automation.
Edited by Tareq Ahram, Waldemar Karwowski, Darko Etinger, and Tea Mijač. Human
Systems Engineering and Design (IHSED2024): Future Trends and Applications.
Vol. 158. Applied Human Factors and Ergonomics International . New York,NY: AHFE
International, 2024. https://doi.org/10.54941/ahfe1005524.'
chicago-de: 'Meyer, Frederic, Sven Hinrichsen und Elio Padoano. 2024. A Structured
Method for the Selection of Business Processes Suitable for Robotic Process Automation.
Hg. von Tareq Ahram, Waldemar Karwowski, Darko Etinger, und Tea Mijač. Human
Systems Engineering and Design (IHSED2024): Future Trends and Applications.
Bd. 158. Applied Human Factors and Ergonomics International . New York,NY: AHFE
International. doi:10.54941/ahfe1005524,
.'
din1505-2-1: 'Meyer, Frederic ; Hinrichsen, Sven ; Padoano,
Elio ; Ahram, T. ; Karwowski, W. ; Etinger,
D. ; Mijač, T. (Hrsg.): A
Structured Method for the Selection of Business Processes Suitable for Robotic
Process Automation, Applied Human Factors and Ergonomics International
. Bd. 158. New York,NY : AHFE International, 2024'
havard: F. Meyer, S. Hinrichsen, E. Padoano, A Structured Method for the Selection
of Business Processes Suitable for Robotic Process Automation, AHFE International,
New York,NY, 2024.
ieee: 'F. Meyer, S. Hinrichsen, and E. Padoano, A Structured Method for the Selection
of Business Processes Suitable for Robotic Process Automation, vol. 158. New
York,NY: AHFE International, 2024. doi: 10.54941/ahfe1005524.'
mla: 'Meyer, Frederic, et al. “A Structured Method for the Selection of Business
Processes Suitable for Robotic Process Automation.” Human Systems Engineering
and Design (IHSED2024): Future Trends and Applications, edited by Tareq Ahram
et al., vol. 158, AHFE International, 2024, https://doi.org/10.54941/ahfe1005524.'
short: F. Meyer, S. Hinrichsen, E. Padoano, A Structured Method for the Selection
of Business Processes Suitable for Robotic Process Automation, AHFE International,
New York,NY, 2024.
ufg: 'Meyer, Frederic/Hinrichsen, Sven/Padoano, Elio: A Structured Method
for the Selection of Business Processes Suitable for Robotic Process Automation,
Bd. 158, hg. von Ahram, Tareq u. a., New York,NY 2024 (Applied Human Factors and
Ergonomics International ).'
van: 'Meyer F, Hinrichsen S, Padoano E. A Structured Method for the Selection of
Business Processes Suitable for Robotic Process Automation. Ahram T, Karwowski
W, Etinger D, Mijač T, editors. Human Systems Engineering and Design (IHSED2024):
Future Trends and Applications. New York,NY: AHFE International; 2024. (Applied
Human Factors and Ergonomics International ; vol. 158).'
conference:
end_date: 2024-09-26
location: Split
name: 'Human Systems Engineering and Design (IHSED2024): Future Trends and Applications.'
start_date: 2024-09-24
date_created: 2024-10-01T15:24:03Z
date_updated: 2025-11-10T16:16:08Z
department:
- _id: DEP7020
- _id: DEP1305
doi: 10.54941/ahfe1005524
editor:
- first_name: 'Tareq '
full_name: 'Ahram, Tareq '
last_name: Ahram
- first_name: 'Waldemar '
full_name: 'Karwowski, Waldemar '
last_name: Karwowski
- first_name: 'Darko '
full_name: 'Etinger, Darko '
last_name: Etinger
- first_name: 'Tea '
full_name: 'Mijač, Tea '
last_name: Mijač
intvolume: ' 158'
keyword:
- Analytic Hierarchy Process (AHP)
- Evaluation Method
- MCDM
- Robotic Process Automation (RPA)
- Selection Criteria
- Systematic Literature Review (SLR)
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
place: New York,NY
publication: 'Human Systems Engineering and Design (IHSED2024): Future Trends and
Applications'
publication_identifier:
eissn:
- 2771-0718
isbn:
- 978-1-964867-34-2
publication_status: published
publisher: AHFE International
quality_controlled: '1'
series_title: 'Applied Human Factors and Ergonomics International '
status: public
title: A Structured Method for the Selection of Business Processes Suitable for Robotic
Process Automation
type: conference_editor_article
user_id: '49010'
volume: 158
year: '2024'
...
---
_id: '11402'
abstract:
- lang: eng
text: In diesem Artikel geht es um die Bedeutung von Selbstbildung im Hochschulstudium
und wie Studierende ihre Fähigkeit zur Selbstbildung verbessern können. Der Artikel
diskutiert verschiedene Lehrmethoden und Initiativen, die dazu beitragen können,
die Selbstkompetenzförderung strukturell zu verankern. Es werden auch adaptive,
lernzielorientierte Kurse vorgestellt, die den Einsatz von Algorithmen der künstlichen
Intelligenz nutzen, um Studierenden hochgradig individualisierte Bildungswege
zu ermöglichen. Der Artikel schließt mit einer Diskussion darüber, wie die Hochschuldidaktik
dazu beitragen kann, die Selbstbildungskompetenz der Studierenden zu fördern.
(Autor); This article is about the importance of self-education in higher education
and how students can improve their ability to self-educate. The article discusses
various teaching methods and initiatives that can help to structurally embed self-education.
It also presents adaptive learning goal-oriented courses that leverage the use
of artificial intelligence algorithms to provide students with highly individualized
educational pathways. The article concludes with a discussion of how higher education
didactics can help promote students’ self-education skills.
author:
- first_name: Tobias
full_name: Schmohl, Tobias
id: '71782'
last_name: Schmohl
orcid: https://orcid.org/0000-0002-7043-5582
- first_name: Stefanie
full_name: Go, Stefanie
id: '81255'
last_name: Go
citation:
ama: 'Schmohl T, Go S. Selbstbildung als Proprium akademischer Didaktik? Ein kritischer
Zwischenruf. In: Haberer M, Günther D, Köhler J, eds. (Selbst-)Lernkompetenzen
Studierender stärken: Unterstützungsangebote – Beratung – Lernräume. Sammelband
zur Fachtagung “(Selbst-)Lernunterstützung an Hochschulen – wieso noch mal?” am
15. und 16.10.2020 an der Technischen Universität Kaiserslautern. Rheinland-Pfälzische
Technische Universität Kaiserslautern-Landau, Zentrum für Innovation und Digitalisierung
in Studium und Lehre (ZIDiS) ; 2023:35-45. doi:https://doi.org/10.25656/01:27948'
apa: 'Schmohl, T., & Go, S. (2023). Selbstbildung als Proprium akademischer
Didaktik? Ein kritischer Zwischenruf. In M. Haberer, D. Günther, & J. Köhler (Eds.),
(Selbst-)Lernkompetenzen Studierender stärken: Unterstützungsangebote – Beratung
– Lernräume. Sammelband zur Fachtagung “(Selbst-)Lernunterstützung an Hochschulen
– wieso noch mal?” am 15. und 16.10.2020 an der Technischen Universität Kaiserslautern
(pp. 35–45). Rheinland-Pfälzische Technische Universität Kaiserslautern-Landau,
Zentrum für Innovation und Digitalisierung in Studium und Lehre (ZIDiS) . https://doi.org/10.25656/01:27948'
bjps: 'Schmohl T and Go S (2023) Selbstbildung als Proprium akademischer
Didaktik? Ein kritischer Zwischenruf. In Haberer M, Günther D and Köhler J (eds),
(Selbst-)Lernkompetenzen Studierender stärken: Unterstützungsangebote – Beratung
– Lernräume. Sammelband zur Fachtagung ‘(Selbst-)Lernunterstützung an Hochschulen
– wieso noch mal?’ am 15. und 16.10.2020 an der Technischen Universität Kaiserslautern.
Kaiserslautern-Landau: Rheinland-Pfälzische Technische Universität Kaiserslautern-Landau,
Zentrum für Innovation und Digitalisierung in Studium und Lehre (ZIDiS) , pp.
35–45.'
chicago: 'Schmohl, Tobias, and Stefanie Go. “Selbstbildung als Proprium akademischer
Didaktik? Ein kritischer Zwischenruf.” In (Selbst-)Lernkompetenzen Studierender
stärken: Unterstützungsangebote – Beratung – Lernräume. Sammelband zur Fachtagung
“(Selbst-)Lernunterstützung an Hochschulen – wieso noch mal?” am 15. und 16.10.2020
an der Technischen Universität Kaiserslautern, edited by Monika Haberer,
Dorit Günther, and Janina Köhler , 35–45. Kaiserslautern-Landau: Rheinland-Pfälzische
Technische Universität Kaiserslautern-Landau, Zentrum für Innovation und Digitalisierung
in Studium und Lehre (ZIDiS) , 2023. https://doi.org/10.25656/01:27948.'
chicago-de: 'Schmohl, Tobias und Stefanie Go. 2023. Selbstbildung als Proprium akademischer
Didaktik? Ein kritischer Zwischenruf. In: (Selbst-)Lernkompetenzen Studierender
stärken: Unterstützungsangebote – Beratung – Lernräume. Sammelband zur Fachtagung
„(Selbst-)Lernunterstützung an Hochschulen – wieso noch mal?“ am 15. und 16.10.2020
an der Technischen Universität Kaiserslautern, hg. von Monika Haberer, Dorit Günther,
und Janina Köhler , 35–45. Kaiserslautern-Landau: Rheinland-Pfälzische Technische
Universität Kaiserslautern-Landau, Zentrum für Innovation und Digitalisierung
in Studium und Lehre (ZIDiS) . doi:https://doi.org/10.25656/01:27948,
.'
din1505-2-1: 'Schmohl, Tobias ; Go, Stefanie: Selbstbildung als Proprium
akademischer Didaktik? Ein kritischer Zwischenruf. In: Haberer,
M. ; Günther, D. ; Köhler , J. (Hrsg.): (Selbst-)Lernkompetenzen
Studierender stärken: Unterstützungsangebote – Beratung – Lernräume. Sammelband
zur Fachtagung „(Selbst-)Lernunterstützung an Hochschulen – wieso noch mal?“ am
15. und 16.10.2020 an der Technischen Universität Kaiserslautern. Kaiserslautern-Landau :
Rheinland-Pfälzische Technische Universität Kaiserslautern-Landau, Zentrum für
Innovation und Digitalisierung in Studium und Lehre (ZIDiS) , 2023, S. 35–45'
havard: 'T. Schmohl, S. Go, Selbstbildung als Proprium akademischer Didaktik? Ein
kritischer Zwischenruf, in: M. Haberer, D. Günther, J. Köhler (Eds.), (Selbst-)Lernkompetenzen
Studierender stärken: Unterstützungsangebote – Beratung – Lernräume. Sammelband
zur Fachtagung “(Selbst-)Lernunterstützung an Hochschulen – wieso noch mal?” am
15. und 16.10.2020 an der Technischen Universität Kaiserslautern, Rheinland-Pfälzische
Technische Universität Kaiserslautern-Landau, Zentrum für Innovation und Digitalisierung
in Studium und Lehre (ZIDiS) , Kaiserslautern-Landau, 2023: pp. 35–45.'
ieee: 'T. Schmohl and S. Go, “Selbstbildung als Proprium akademischer Didaktik?
Ein kritischer Zwischenruf,” in (Selbst-)Lernkompetenzen Studierender stärken:
Unterstützungsangebote – Beratung – Lernräume. Sammelband zur Fachtagung “(Selbst-)Lernunterstützung
an Hochschulen – wieso noch mal?” am 15. und 16.10.2020 an der Technischen Universität
Kaiserslautern, M. Haberer, D. Günther, and J. Köhler , Eds. Kaiserslautern-Landau:
Rheinland-Pfälzische Technische Universität Kaiserslautern-Landau, Zentrum für
Innovation und Digitalisierung in Studium und Lehre (ZIDiS) , 2023, pp. 35–45.
doi: https://doi.org/10.25656/01:27948.'
mla: 'Schmohl, Tobias, and Stefanie Go. “Selbstbildung als Proprium akademischer
Didaktik? Ein kritischer Zwischenruf.” (Selbst-)Lernkompetenzen Studierender
stärken: Unterstützungsangebote – Beratung – Lernräume. Sammelband zur Fachtagung
“(Selbst-)Lernunterstützung an Hochschulen – wieso noch mal?” am 15. und 16.10.2020
an der Technischen Universität Kaiserslautern, edited by Monika Haberer et
al., Rheinland-Pfälzische Technische Universität Kaiserslautern-Landau, Zentrum
für Innovation und Digitalisierung in Studium und Lehre (ZIDiS) , 2023, pp. 35–45,
https://doi.org/10.25656/01:27948.'
short: 'T. Schmohl, S. Go, in: M. Haberer, D. Günther, J. Köhler (Eds.), (Selbst-)Lernkompetenzen
Studierender stärken: Unterstützungsangebote – Beratung – Lernräume. Sammelband
zur Fachtagung “(Selbst-)Lernunterstützung an Hochschulen – wieso noch mal?” am
15. und 16.10.2020 an der Technischen Universität Kaiserslautern, Rheinland-Pfälzische
Technische Universität Kaiserslautern-Landau, Zentrum für Innovation und Digitalisierung
in Studium und Lehre (ZIDiS) , Kaiserslautern-Landau, 2023, pp. 35–45.'
ufg: 'Schmohl, Tobias/Go, Stefanie: Selbstbildung als Proprium akademischer
Didaktik? Ein kritischer Zwischenruf, in: Haberer, Monika/Günther, Dorit/Köhler
, Janina (Hgg.): (Selbst-)Lernkompetenzen Studierender stärken: Unterstützungsangebote
– Beratung – Lernräume. Sammelband zur Fachtagung „(Selbst-)Lernunterstützung
an Hochschulen – wieso noch mal?“ am 15. und 16.10.2020 an der Technischen Universität
Kaiserslautern, Kaiserslautern-Landau 2023, S. 35–45.'
van: 'Schmohl T, Go S. Selbstbildung als Proprium akademischer Didaktik? Ein kritischer
Zwischenruf. In: Haberer M, Günther D, Köhler J, editors. (Selbst-)Lernkompetenzen
Studierender stärken: Unterstützungsangebote – Beratung – Lernräume Sammelband
zur Fachtagung “(Selbst-)Lernunterstützung an Hochschulen – wieso noch mal?” am
15 und 16102020 an der Technischen Universität Kaiserslautern. Kaiserslautern-Landau:
Rheinland-Pfälzische Technische Universität Kaiserslautern-Landau, Zentrum für
Innovation und Digitalisierung in Studium und Lehre (ZIDiS) ; 2023. p. 35–45.'
date_created: 2024-04-30T18:11:12Z
date_updated: 2024-05-15T12:31:49Z
department:
- _id: DEP2000
doi: https://doi.org/10.25656/01:27948
editor:
- first_name: 'Monika '
full_name: 'Haberer, Monika '
last_name: Haberer
- first_name: 'Dorit '
full_name: 'Günther, Dorit '
last_name: Günther
- first_name: 'Janina '
full_name: 'Köhler , Janina '
last_name: 'Köhler '
keyword:
- Selbstbildung
- Studium
- Selbstkompetenz
- Lehrmethode
- Adaptiver Unterricht
- Künstliche Intelligenz
- Hochschuldidaktik
- Lerngegenstand
- Wissen
- Bildungsbiografie
- Hochschule
- Student
- Self-education
- Academic studies
- Teaching method
- Artificial intelligence
- University didactics
- Knowledge
- School career
- Higher education institute
- Male student
language:
- iso: ger
page: 35-45
place: Kaiserslautern-Landau
publication: '(Selbst-)Lernkompetenzen Studierender stärken: Unterstützungsangebote
– Beratung – Lernräume. Sammelband zur Fachtagung "(Selbst-)Lernunterstützung an
Hochschulen – wieso noch mal?" am 15. und 16.10.2020 an der Technischen Universität
Kaiserslautern'
publication_status: published
publisher: 'Rheinland-Pfälzische Technische Universität Kaiserslautern-Landau, Zentrum
für Innovation und Digitalisierung in Studium und Lehre (ZIDiS) '
quality_controlled: '1'
status: public
title: Selbstbildung als Proprium akademischer Didaktik? Ein kritischer Zwischenruf
type: book_chapter
user_id: '83781'
year: '2023'
...
---
_id: '11656'
abstract:
- lang: eng
text: Natural ventilation in a building is an effective way to achieve acceptable
indoor air quality. Ventilation dilutes contaminants such as bioeffluents generated
by occupants, substances emitted from building materials, and the water vapor
generated by occupants’ activities. In a building that requires heating and cooling,
adequate ventilation is crucial to minimize energy consumption while maintaining
healthy indoor air quality. However, measuring the actual magnitude of the natural
ventilation rate, including infiltration through the building envelope and airflow
through the building openings, is not always feasible. Although international
and national standards suggested the required ventilation rates to maintain acceptable
indoor air quality in buildings, they did not offer action plans to achieve or
evaluate those design ventilation rates in buildings in use. In this study, the
occupant-generated carbon dioxide (CO2) tracer gas decay method was applied to
estimate the ventilation rates in an office room in Seoul, South Korea, from summer
to winter. Using the method, real-time ventilation rates can be calculated by
monitoring indoor and outdoor CO2 concentrations without injecting a tracer gas.
For natural ventilation in the test room, 145 mm-diameter circular openings on
the fixed glass were used. As a result, first, the indoor CO2 concentrations were
used as an indicator to evaluate how much the indoor air quality deteriorated
when all the windows were closed in an occupied office room compared to the international
standards for indoor air quality. Moreover, we found out that the estimated ventilation
rates varied depending on various environmental conditions, even with the same
openings for natural ventilation. Considering the indoor and outdoor temperature
differences and outdoor wind speeds as the main factors influencing the ventilation
rates, we analyzed how they affected the ventilation rates in the different seasons
of South Korea. When the wind speeds were calm, less than 2 m/s, the temperature
difference played as a factor that influenced the estimated ventilation rates.
On the other hand, when the temperature differences were low, less than 3 °C,
the wind speed was the primary factor. This study raises awareness about the risk
of poor indoor air quality in office rooms that could lead to health problems
or unpleasant working environments. This study presents an example of estimating
the ventilation rates in an existing building. By using the presented method,
the ventilation rate in an existing building can be simply estimated while using
the building as usual, and appropriate ventilation strategies for the building
can be determined to maintain the desired indoor air quality.
article_number: '9892'
author:
- first_name: Hyeonji
full_name: Seol, Hyeonji
id: '77436'
last_name: Seol
- first_name: Daniel
full_name: Arztmann, Daniel
id: '58805'
last_name: Arztmann
- first_name: Naree
full_name: Kim, Naree
last_name: Kim
- first_name: Alvaro
full_name: Balderrama, Alvaro
id: '79418'
last_name: Balderrama
citation:
ama: Seol H, Arztmann D, Kim N, Balderrama A. Estimation of Natural Ventilation
Rates in an Office Room with 145 mm-Diameter Circular Openings Using the Occupant-Generated
Tracer-Gas Method. Sustainability. 2023;15(13). doi:10.3390/su15139892
apa: Seol, H., Arztmann, D., Kim, N., & Balderrama, A. (2023). Estimation of
Natural Ventilation Rates in an Office Room with 145 mm-Diameter Circular Openings
Using the Occupant-Generated Tracer-Gas Method. Sustainability, 15(13),
Article 9892. https://doi.org/10.3390/su15139892
bjps: Seol H et al. (2023) Estimation of Natural Ventilation Rates
in an Office Room with 145 Mm-Diameter Circular Openings Using the Occupant-Generated
Tracer-Gas Method. Sustainability 15.
chicago: Seol, Hyeonji, Daniel Arztmann, Naree Kim, and Alvaro Balderrama. “Estimation
of Natural Ventilation Rates in an Office Room with 145 Mm-Diameter Circular Openings
Using the Occupant-Generated Tracer-Gas Method.” Sustainability 15, no.
13 (2023). https://doi.org/10.3390/su15139892.
chicago-de: Seol, Hyeonji, Daniel Arztmann, Naree Kim und Alvaro Balderrama. 2023.
Estimation of Natural Ventilation Rates in an Office Room with 145 mm-Diameter
Circular Openings Using the Occupant-Generated Tracer-Gas Method. Sustainability
15, Nr. 13. doi:10.3390/su15139892,
.
din1505-2-1: 'Seol, Hyeonji ; Arztmann, Daniel ; Kim,
Naree ; Balderrama, Alvaro:
Estimation of Natural Ventilation Rates in an Office Room with 145 mm-Diameter
Circular Openings Using the Occupant-Generated Tracer-Gas Method. In: Sustainability
Bd. 15. Basel, MDPI AG (2023), Nr. 13'
havard: H. Seol, D. Arztmann, N. Kim, A. Balderrama, Estimation of Natural Ventilation
Rates in an Office Room with 145 mm-Diameter Circular Openings Using the Occupant-Generated
Tracer-Gas Method, Sustainability. 15 (2023).
ieee: 'H. Seol, D. Arztmann, N. Kim, and A. Balderrama, “Estimation of Natural Ventilation
Rates in an Office Room with 145 mm-Diameter Circular Openings Using the Occupant-Generated
Tracer-Gas Method,” Sustainability, vol. 15, no. 13, Art. no. 9892, 2023,
doi: 10.3390/su15139892.'
mla: Seol, Hyeonji, et al. “Estimation of Natural Ventilation Rates in an Office
Room with 145 Mm-Diameter Circular Openings Using the Occupant-Generated Tracer-Gas
Method.” Sustainability, vol. 15, no. 13, 9892, 2023, https://doi.org/10.3390/su15139892.
short: H. Seol, D. Arztmann, N. Kim, A. Balderrama, Sustainability 15 (2023).
ufg: 'Seol, Hyeonji u. a.: Estimation of Natural Ventilation Rates in an
Office Room with 145 mm-Diameter Circular Openings Using the Occupant-Generated
Tracer-Gas Method, in: Sustainability 15 (2023), H. 13.'
van: Seol H, Arztmann D, Kim N, Balderrama A. Estimation of Natural Ventilation
Rates in an Office Room with 145 mm-Diameter Circular Openings Using the Occupant-Generated
Tracer-Gas Method. Sustainability. 2023;15(13).
date_created: 2024-07-04T12:21:13Z
date_updated: 2024-07-16T11:38:12Z
department:
- _id: DEP1034
- _id: DEP1055
doi: 10.3390/su15139892
intvolume: ' 15'
issue: '13'
keyword:
- natural ventilation
- occupant-generated CO2 tracer gas method
- ventilation rates
- infiltration rates
language:
- iso: eng
place: Basel
publication: Sustainability
publication_identifier:
issn:
- 2071-1050
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: Estimation of Natural Ventilation Rates in an Office Room with 145 mm-Diameter
Circular Openings Using the Occupant-Generated Tracer-Gas Method
type: scientific_journal_article
user_id: '83781'
volume: 15
year: '2023'
...
---
_id: '10602'
abstract:
- lang: eng
text: The anatomical structure of oil palm wood is only to a limited extent comparable
to common wood species used in construction. Typical for monocotyledons, the material
is composed of high density vascular bundles and a parenchymatous tissue of lower
density. In three experiment sets, the local and global moduli of elasticity (MOE)
and the flexural strength of oil palm wood based GLT are determined using FEM
and various influencing parameters are investigated in a sensitivity analysis.
Furthermore, the application of densified tension lamellas is studied. The results
of the modelling are compared with the results from mechanical tests. Significant
differences, mainly attributed to the specific parameters of the selected material,
are observed. The results of this preliminary study serve as a starting point
for computer-aided optimisation and modelling of other oil palm-based products.
author:
- first_name: Martin
full_name: Hackel, Martin
id: '79798'
last_name: Hackel
citation:
ama: Hackel M. FLEXURAL PROPERTIES OF OIL PALM WOOD BASED GLUE LAMINATED TIMBER
USING FINITE ELEMENT METHOD. (Nyrud AQ, Norges miljø- og biovitenskapelige
universitet , Norges teknisk-naturvitenskapelige universitet , Arkitektur- og
designhøgskolen i Oslo, eds.). Curran Associates, Inc.; 2023. doi:10.52202/069179-0088
apa: 'Hackel, M. (2023). FLEXURAL PROPERTIES OF OIL PALM WOOD BASED GLUE LAMINATED
TIMBER USING FINITE ELEMENT METHOD. In A. Q. Nyrud, Norges miljø- og biovitenskapelige
universitet , Norges teknisk-naturvitenskapelige universitet , & Arkitektur-
og designhøgskolen i Oslo (Eds.), Timber for a livable future : World Conference
on Timber Engineering : WCTE 2023 : 19-22 June 2023, Oslo, Norway . Curran
Associates, Inc. https://doi.org/10.52202/069179-0088'
bjps: 'Hackel M (2023) FLEXURAL PROPERTIES OF OIL PALM WOOD BASED GLUE
LAMINATED TIMBER USING FINITE ELEMENT METHOD, Nyrud AQ et al. (eds). Red Hook,
NY, USA: Curran Associates, Inc.'
chicago: 'Hackel, Martin. FLEXURAL PROPERTIES OF OIL PALM WOOD BASED GLUE LAMINATED
TIMBER USING FINITE ELEMENT METHOD. Edited by Anders Q. Nyrud, Norges miljø-
og biovitenskapelige universitet , Norges teknisk-naturvitenskapelige universitet
, and Arkitektur- og designhøgskolen i Oslo. Timber for a Livable Future :
World Conference on Timber Engineering : WCTE 2023 : 19-22 June 2023, Oslo, Norway
. Red Hook, NY, USA: Curran Associates, Inc., 2023. https://doi.org/10.52202/069179-0088.'
chicago-de: 'Hackel, Martin. 2023. FLEXURAL PROPERTIES OF OIL PALM WOOD BASED
GLUE LAMINATED TIMBER USING FINITE ELEMENT METHOD. Hg. von Anders Q. Nyrud,
Norges miljø- og biovitenskapelige universitet , Norges teknisk-naturvitenskapelige
universitet , und Arkitektur- og designhøgskolen i Oslo. Timber for a livable
future : World Conference on Timber Engineering : WCTE 2023 : 19-22 June 2023,
Oslo, Norway . Red Hook, NY, USA: Curran Associates, Inc. doi:10.52202/069179-0088,
.'
din1505-2-1: 'Hackel, Martin ; Nyrud, A. Q. ; Norges
miljø- og biovitenskapelige universitet ; Norges
teknisk-naturvitenskapelige universitet ; Arkitektur-
og designhøgskolen i Oslo (Hrsg.): FLEXURAL PROPERTIES OF OIL PALM WOOD
BASED GLUE LAMINATED TIMBER USING FINITE ELEMENT METHOD. Red Hook, NY, USA :
Curran Associates, Inc., 2023'
havard: M. Hackel, FLEXURAL PROPERTIES OF OIL PALM WOOD BASED GLUE LAMINATED TIMBER
USING FINITE ELEMENT METHOD, Curran Associates, Inc., Red Hook, NY, USA, 2023.
ieee: 'M. Hackel, FLEXURAL PROPERTIES OF OIL PALM WOOD BASED GLUE LAMINATED TIMBER
USING FINITE ELEMENT METHOD. Red Hook, NY, USA: Curran Associates, Inc., 2023.
doi: 10.52202/069179-0088.'
mla: 'Hackel, Martin. “FLEXURAL PROPERTIES OF OIL PALM WOOD BASED GLUE LAMINATED
TIMBER USING FINITE ELEMENT METHOD.” Timber for a Livable Future : World Conference
on Timber Engineering : WCTE 2023 : 19-22 June 2023, Oslo, Norway , edited
by Anders Q. Nyrud et al., Curran Associates, Inc., 2023, https://doi.org/10.52202/069179-0088.'
short: M. Hackel, FLEXURAL PROPERTIES OF OIL PALM WOOD BASED GLUE LAMINATED TIMBER
USING FINITE ELEMENT METHOD, Curran Associates, Inc., Red Hook, NY, USA, 2023.
ufg: 'Hackel, Martin: FLEXURAL PROPERTIES OF OIL PALM WOOD BASED GLUE LAMINATED
TIMBER USING FINITE ELEMENT METHOD, hg. von Nyrud, Anders Q. u. a., Red Hook,
NY, USA 2023.'
van: 'Hackel M. FLEXURAL PROPERTIES OF OIL PALM WOOD BASED GLUE LAMINATED TIMBER
USING FINITE ELEMENT METHOD. Nyrud AQ, Norges miljø- og biovitenskapelige universitet
, Norges teknisk-naturvitenskapelige universitet , Arkitektur- og designhøgskolen
i Oslo, editors. Timber for a livable future : World Conference on Timber Engineering :
WCTE 2023 : 19-22 June 2023, Oslo, Norway . Red Hook, NY, USA: Curran Associates,
Inc.; 2023.'
conference:
end_date: 2023-06-22
location: Oslo (Norwegen)
name: 13th World Conference on Timber Engineering (WCTE 2023)
start_date: 2023-06-19
corporate_editor:
- 'Norges miljø- og biovitenskapelige universitet '
- 'Norges teknisk-naturvitenskapelige universitet '
- Arkitektur- og designhøgskolen i Oslo
date_created: 2023-10-26T13:59:52Z
date_updated: 2024-06-03T14:10:01Z
department:
- _id: DEP7018
- _id: DEP1309
doi: 10.52202/069179-0088
editor:
- first_name: 'Anders Q. '
full_name: 'Nyrud, Anders Q. '
last_name: Nyrud
keyword:
- Oil palm wood
- finite element method (FEM)
- GLT
- modulus of elasticity
- flexural strength
language:
- iso: eng
place: Red Hook, NY, USA
publication: 'Timber for a livable future : World Conference on Timber Engineering
: WCTE 2023 : 19-22 June 2023, Oslo, Norway '
publication_identifier:
eisbn:
- 978-1-7138-7327-3
isbn:
- 978-1-7138-7329-7
publication_status: published
publisher: Curran Associates, Inc.
status: public
title: FLEXURAL PROPERTIES OF OIL PALM WOOD BASED GLUE LAMINATED TIMBER USING FINITE
ELEMENT METHOD
type: conference_editor_article
user_id: '83781'
year: '2023'
...
---
_id: '10786'
abstract:
- lang: eng
text: "The anatomical structure of oil palm wood is only to a limited extent comparable
to common wood species\r\nused in construction. Typical for monocotyledons, the
material is composed of high density vascular bundles and a\r\nparenchymatous
tissue of lower density. In three experiment sets, the local and global moduli
of elasticity (MOE) and the flexural strength of oil palm wood based GLT are determined
using FEM and various influencing parameters are\r\ninvestigated in a sensitivity
analysis. Furthermore, the application of densified tension lamellas is studied.
The results of the modelling are compared with the results from mechanical tests.
Significant differences, mainly attributed to the\r\nspecific parameters of the
selected material, are observed. The results of this preliminary study serve as
a starting point for computer-aided optimisation and modelling of other oil palm-based
products."
author:
- first_name: Martin
full_name: Hackel, Martin
id: '79798'
last_name: Hackel
citation:
ama: Hackel M. FLEXURAL PROPERTIES OF OIL PALM WOOD BASED GLUE LAMINATED TIMBER
USING FINITE ELEMENT METHOD. World Conference on Timber Engineering (WCTE
2023); 2023:647-656. doi:10.52202/069179-0088
apa: Hackel, M. (2023). FLEXURAL PROPERTIES OF OIL PALM WOOD BASED GLUE LAMINATED
TIMBER USING FINITE ELEMENT METHOD. In World Conference on Timber Engineering
(WCTE 2023) (pp. 647–656). World Conference on Timber Engineering (WCTE 2023).
https://doi.org/10.52202/069179-0088
bjps: Hackel M (2023) FLEXURAL PROPERTIES OF OIL PALM WOOD BASED GLUE
LAMINATED TIMBER USING FINITE ELEMENT METHOD. World Conference on Timber Engineering
(WCTE 2023).
chicago: Hackel, Martin. FLEXURAL PROPERTIES OF OIL PALM WOOD BASED GLUE LAMINATED
TIMBER USING FINITE ELEMENT METHOD. World Conference on Timber Engineering
(WCTE 2023). World Conference on Timber Engineering (WCTE 2023), 2023. https://doi.org/10.52202/069179-0088.
chicago-de: Hackel, Martin. 2023. FLEXURAL PROPERTIES OF OIL PALM WOOD BASED
GLUE LAMINATED TIMBER USING FINITE ELEMENT METHOD. World Conference on
Timber Engineering (WCTE 2023). World Conference on Timber Engineering (WCTE
2023). doi:10.52202/069179-0088,
.
din1505-2-1: 'Hackel, Martin: FLEXURAL
PROPERTIES OF OIL PALM WOOD BASED GLUE LAMINATED TIMBER USING FINITE ELEMENT METHOD :
World Conference on Timber Engineering (WCTE 2023), 2023'
havard: M. Hackel, FLEXURAL PROPERTIES OF OIL PALM WOOD BASED GLUE LAMINATED TIMBER
USING FINITE ELEMENT METHOD, World Conference on Timber Engineering (WCTE 2023),
2023.
ieee: 'M. Hackel, FLEXURAL PROPERTIES OF OIL PALM WOOD BASED GLUE LAMINATED TIMBER
USING FINITE ELEMENT METHOD. World Conference on Timber Engineering (WCTE
2023), 2023, pp. 647–656. doi: 10.52202/069179-0088.'
mla: Hackel, Martin. “FLEXURAL PROPERTIES OF OIL PALM WOOD BASED GLUE LAMINATED
TIMBER USING FINITE ELEMENT METHOD.” World Conference on Timber Engineering
(WCTE 2023), World Conference on Timber Engineering (WCTE 2023), 2023, pp.
647–56, https://doi.org/10.52202/069179-0088.
short: M. Hackel, FLEXURAL PROPERTIES OF OIL PALM WOOD BASED GLUE LAMINATED TIMBER
USING FINITE ELEMENT METHOD, World Conference on Timber Engineering (WCTE 2023),
2023.
ufg: 'Hackel, Martin: FLEXURAL PROPERTIES OF OIL PALM WOOD BASED GLUE LAMINATED
TIMBER USING FINITE ELEMENT METHOD, o. O. 2023.'
van: Hackel M. FLEXURAL PROPERTIES OF OIL PALM WOOD BASED GLUE LAMINATED TIMBER
USING FINITE ELEMENT METHOD. World Conference on Timber Engineering (WCTE 2023).
World Conference on Timber Engineering (WCTE 2023); 2023.
conference:
end_date: 2023-06-22
location: Oslo (Norwegen)
name: World Conference on Timber Engineering (WCTE 2023)
start_date: 2023-06-19
date_created: 2023-11-21T07:44:35Z
date_updated: 2025-05-24T13:21:52Z
department:
- _id: DEP7018
- _id: DEP1309
doi: 10.52202/069179-0088
keyword:
- Oil palm wood
- finite element method (FEM)
- GLT
- modulus of elasticity
- flexural strength
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.proceedings.com/content/069/069179-0088open.pdf
oa: '1'
page: 647-656
publication: World Conference on Timber Engineering (WCTE 2023)
publication_status: published
publisher: World Conference on Timber Engineering (WCTE 2023)
status: public
title: FLEXURAL PROPERTIES OF OIL PALM WOOD BASED GLUE LAMINATED TIMBER USING FINITE
ELEMENT METHOD
type: conference_editor_article
user_id: '79798'
year: '2023'
...
---
_id: '9204'
abstract:
- lang: eng
text: The development of autonomous vehicles and the integration of new information
and communication technologies are making the reliability of electrical systems
and components in modern vehicles increasingly important. Electrical connectors
are a crucial component in an electrical on-board system. They are exposed to
a wide variety of influences by the environment and operating conditions. Thus,
the degradation of electrical connectors can occur. Material and surface analysis
methods are the tools used to analyze the degradation mechanisms in connectors
after lifetime tests, as well as in field operations. Within the framework of
this study, a wide variety of methods from the analytical scope are presented
and discussed. The connector surfaces degraded by different failure mechanisms
are analyzed using various material and surface analysis methods. The quality
and the nature of the analyses results obtained from various analysis methods
are compared. Also, this study deals with the benefits and limitations, as well
as the effort and the specific challenges of different material and surface analytical
methods for the evaluation of failure mechanisms from the point of view of a material
and surface analyst.
author:
- first_name: Philipp
full_name: Kolmer, Philipp
last_name: Kolmer
- first_name: Abhay Rammurti
full_name: Shukla, Abhay Rammurti
id: '72757'
last_name: Shukla
- first_name: Jian
full_name: Song, Jian
id: '5297'
last_name: Song
citation:
ama: 'Kolmer P, Shukla AR, Song J. Methods of Material and Surface Analysis for
the Evaluation of Failure Modes for Electrical Connectors. Technologies : open
access journal. 2022;10(6):124. doi:https://doi.org/10.3390/technologies10060124'
apa: 'Kolmer, P., Shukla, A. R., & Song, J. (2022). Methods of Material and
Surface Analysis for the Evaluation of Failure Modes for Electrical Connectors.
Technologies : Open Access Journal, 10(6), 124. https://doi.org/10.3390/technologies10060124'
bjps: 'Kolmer P, Shukla AR and Song J (2022) Methods of Material and Surface
Analysis for the Evaluation of Failure Modes for Electrical Connectors. Technologies :
open access journal 10, 124.'
chicago: 'Kolmer, Philipp, Abhay Rammurti Shukla, and Jian Song. “Methods of Material
and Surface Analysis for the Evaluation of Failure Modes for Electrical Connectors.”
Technologies : Open Access Journal 10, no. 6 (2022): 124. https://doi.org/10.3390/technologies10060124.'
chicago-de: 'Kolmer, Philipp, Abhay Rammurti Shukla und Jian Song. 2022. Methods
of Material and Surface Analysis for the Evaluation of Failure Modes for Electrical
Connectors. Technologies : open access journal 10, Nr. 6: 124. doi:https://doi.org/10.3390/technologies10060124,
.'
din1505-2-1: 'Kolmer, Philipp ; Shukla, Abhay Rammurti ; Song,
Jian: Methods of Material and Surface Analysis for the Evaluation of Failure
Modes for Electrical Connectors. In: Technologies : open access journal
Bd. 10. Basel, MDPI (2022), Nr. 6, S. 124'
havard: 'P. Kolmer, A.R. Shukla, J. Song, Methods of Material and Surface Analysis
for the Evaluation of Failure Modes for Electrical Connectors, Technologies :
Open Access Journal. 10 (2022) 124.'
ieee: 'P. Kolmer, A. R. Shukla, and J. Song, “Methods of Material and Surface Analysis
for the Evaluation of Failure Modes for Electrical Connectors,” Technologies :
open access journal, vol. 10, no. 6, p. 124, 2022, doi: https://doi.org/10.3390/technologies10060124.'
mla: 'Kolmer, Philipp, et al. “Methods of Material and Surface Analysis for the
Evaluation of Failure Modes for Electrical Connectors.” Technologies : Open
Access Journal, vol. 10, no. 6, 2022, p. 124, https://doi.org/10.3390/technologies10060124.'
short: 'P. Kolmer, A.R. Shukla, J. Song, Technologies : Open Access Journal 10 (2022)
124.'
ufg: 'Kolmer, Philipp/Shukla, Abhay Rammurti/Song, Jian: Methods of Material
and Surface Analysis for the Evaluation of Failure Modes for Electrical Connectors,
in: Technologies : open access journal 10 (2022), H. 6, S. 124.'
van: 'Kolmer P, Shukla AR, Song J. Methods of Material and Surface Analysis for
the Evaluation of Failure Modes for Electrical Connectors. Technologies : open
access journal. 2022;10(6):124.'
date_created: 2022-12-11T12:35:54Z
date_updated: 2024-08-05T07:19:56Z
ddc:
- '600'
department:
- _id: DEP6012
doi: https://doi.org/10.3390/technologies10060124
intvolume: ' 10'
issue: '6'
keyword:
- electrical connector
- failure modes
- wear
- fretting corrosion
- analysis
- material
- method
language:
- iso: eng
page: '124'
place: Basel
publication: 'Technologies : open access journal'
publication_identifier:
eissn:
- '2227-7080 '
publication_status: published
publisher: MDPI
status: public
title: Methods of Material and Surface Analysis for the Evaluation of Failure Modes
for Electrical Connectors
type: scientific_journal_article
user_id: '83781'
volume: 10
year: '2022'
...
---
_id: '1903'
abstract:
- lang: eng
text: Because of the trend towards smaller batch sizes and customer-specific products,
employees in assembly have to absorb and process more and more information. With
the help of assistance systems, the process of information absorption and processing
can be designed in a more economical and human-oriented way. Despite the potentials
of such systems, companies pay too little attention to the informational design
of assembly systems, resulting in a number of significant deficits in information
management. To identify such deficits in operational practice, a questionnaire
has been developed. This allows the potential use of informational assistance
systems for an assembly system to be estimated. In this article, results from
an exploratory factor analysis of the developed instrument will be presented and
interpreted as a basis for the further development of the questionnaire.
author:
- first_name: Sven
full_name: Bendzioch, Sven
id: '71395'
last_name: Bendzioch
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Benjamin
full_name: Adrian, Benjamin
id: '42266'
last_name: Adrian
- first_name: Manfred
full_name: Bornewasser, Manfred
last_name: Bornewasser
citation:
ama: 'Bendzioch S, Hinrichsen S, Adrian B, Bornewasser M. Method for Measuring the
Application Potential of Assembly Assistance Systems. In: Nunes IL, ed. Advances
in Human Factors and Systems Interaction AHFE 2019. Vol 959. Advances in Intelligent
Systems and Computing. Cham: Springer; 2020:3-11. doi:https://doi.org/10.1007/978-3-030-20040-4_1'
apa: 'Bendzioch, S., Hinrichsen, S., Adrian, B., & Bornewasser, M. (2020). Method
for Measuring the Application Potential of Assembly Assistance Systems. In I.
L. Nunes (Ed.), Advances in Human Factors and Systems Interaction AHFE 2019
(Vol. 959, pp. 3–11). Cham: Springer. https://doi.org/10.1007/978-3-030-20040-4_1'
bjps: 'Bendzioch S et al. (2020) Method for Measuring the Application
Potential of Assembly Assistance Systems. In Nunes IL (ed.), Advances in Human
Factors and Systems Interaction AHFE 2019, vol. 959. Cham: Springer, pp. 3–11.'
chicago: 'Bendzioch, Sven, Sven Hinrichsen, Benjamin Adrian, and Manfred Bornewasser.
“Method for Measuring the Application Potential of Assembly Assistance Systems.”
In Advances in Human Factors and Systems Interaction AHFE 2019, edited
by Isabel L. Nunes, 959:3–11. Advances in Intelligent Systems and Computing. Cham:
Springer, 2020. https://doi.org/10.1007/978-3-030-20040-4_1.'
chicago-de: 'Bendzioch, Sven, Sven Hinrichsen, Benjamin Adrian und Manfred Bornewasser.
2020. Method for Measuring the Application Potential of Assembly Assistance Systems.
In: Advances in Human Factors and Systems Interaction AHFE 2019, hg. von
Isabel L. Nunes, 959:3–11. Advances in Intelligent Systems and Computing. Cham:
Springer. doi:https://doi.org/10.1007/978-3-030-20040-4_1,
.'
din1505-2-1: 'Bendzioch, Sven ; Hinrichsen, Sven ; Adrian,
Benjamin ; Bornewasser, Manfred:
Method for Measuring the Application Potential of Assembly Assistance Systems.
In: Nunes, I. L. (Hrsg.): Advances
in Human Factors and Systems Interaction AHFE 2019, Advances in Intelligent
Systems and Computing. Bd. 959. Cham : Springer, 2020, S. 3–11'
havard: 'S. Bendzioch, S. Hinrichsen, B. Adrian, M. Bornewasser, Method for Measuring
the Application Potential of Assembly Assistance Systems, in: I.L. Nunes (Ed.),
Advances in Human Factors and Systems Interaction AHFE 2019, Springer, Cham, 2020:
pp. 3–11.'
ieee: S. Bendzioch, S. Hinrichsen, B. Adrian, and M. Bornewasser, “Method for Measuring
the Application Potential of Assembly Assistance Systems,” in Advances in Human
Factors and Systems Interaction AHFE 2019, Washington D.C., USA, 2020, vol.
959, pp. 3–11.
mla: Bendzioch, Sven, et al. “Method for Measuring the Application Potential of
Assembly Assistance Systems.” Advances in Human Factors and Systems Interaction
AHFE 2019, edited by Isabel L. Nunes, vol. 959, Springer, 2020, pp. 3–11,
doi:https://doi.org/10.1007/978-3-030-20040-4_1.
short: 'S. Bendzioch, S. Hinrichsen, B. Adrian, M. Bornewasser, in: I.L. Nunes (Ed.),
Advances in Human Factors and Systems Interaction AHFE 2019, Springer, Cham, 2020,
pp. 3–11.'
ufg: 'Bendzioch, Sven et. al. (2020): Method for Measuring the Application
Potential of Assembly Assistance Systems, in: Isabel L. Nunes (Hg.): Advances
in Human Factors and Systems Interaction AHFE 2019 (=Advances in Intelligent
Systems and Computing 959), Cham, S. 3–11.'
van: 'Bendzioch S, Hinrichsen S, Adrian B, Bornewasser M. Method for Measuring the
Application Potential of Assembly Assistance Systems. In: Nunes IL, editor. Advances
in Human Factors and Systems Interaction AHFE 2019. Cham: Springer; 2020. p. 3–11.
(Advances in Intelligent Systems and Computing; vol. 959).'
conference:
end_date: 2019-07-28
location: Washington D.C., USA
name: 10th International Conference on Applied Human Factors and Ergonomics 2019
start_date: 2019-07-24
date_created: 2019-09-10T06:38:20Z
date_updated: 2023-03-15T13:49:37Z
department:
- _id: DEP7020
- _id: DEP1305
doi: https://doi.org/10.1007/978-3-030-20040-4_1
editor:
- first_name: Isabel L.
full_name: Nunes, Isabel L.
last_name: Nunes
intvolume: ' 959'
keyword:
- Complexity evaluation
- Manual assembly
- Questionnaire
- Work analysis method
- Assistance systems
- Exploratory factor analysis
language:
- iso: eng
page: 3-11
place: Cham
project:
- _id: FBB6D104-44D9-11E9-AA25-B54CDB794CE1
name: Montexas 4.0
publication: Advances in Human Factors and Systems Interaction AHFE 2019
publication_identifier:
eisbn:
- 978-3-030-20040-4
isbn:
- 978-3-030-20039-8
publication_status: published
publisher: Springer
quality_controlled: '1'
series_title: Advances in Intelligent Systems and Computing
status: public
title: Method for Measuring the Application Potential of Assembly Assistance Systems
type: conference
user_id: '49010'
volume: 959
year: 2020
...
---
_id: '594'
abstract:
- lang: eng
text: Due to steadily increased demand for customized products, as well as their
enhanced complexity and shorter product lifecycles, companies in all industries
require a reliable prediction of the expected product development costs from the
very start of product realization. Incorrectly estimated project costs may lead
to serious consequences in the course of a development project. For example, offers
are most often based on such early cost estimations and consequently, a major
safety margin has to be added, which may result in the refusal of an order. A
too low estimation of the costs of aproduct development project, on the other
hand, may result in a loss for the project.In this paper, a software tool is presented
for the prediction of product development costs which offers the user the ability
to create a more accurate prediction of project costs on the basis of a minimum
of retrograde project information. By combining a parametric cost model and cost
result with stochastic character, based on the Monte Carlo method, in one software
system, it is possible to significantly improve projectcost estimations.
author:
- first_name: Andreas
full_name: Otte, Andreas
id: '51466'
last_name: Otte
- first_name: Eva
full_name: Scheideler, Eva
id: '61522'
last_name: Scheideler
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
id: '14290'
last_name: Villmer
citation:
ama: 'Otte A, Scheideler E, Villmer F-J. Project Cost Estimator - A Parameter-Based
Tool to Predict Product Realization Costs at a Very Early Stage. In: Villmer F-J,
Padoano E, Department of Production Engineering and Management, eds. Department
of Production Engineering and Management. Lemgo; 2016:281-292.'
apa: Otte, A., Scheideler, E., & Villmer, F.-J. (2016). Project Cost Estimator
- A Parameter-Based Tool to Predict Product Realization Costs at a Very Early
Stage. In F.-J. Villmer, E. Padoano, & Department of Production Engineering
and Management (Eds.), Department of Production Engineering and Management
(pp. 281–292). Lemgo.
bjps: Otte A, Scheideler E and Villmer F-J (2016) Project Cost Estimator
- A Parameter-Based Tool to Predict Product Realization Costs at a Very Early
Stage. In Villmer F-J, Padoano E and Department of Production Engineering and
Management (eds), Department of Production Engineering and Management.
Lemgo, pp. 281–292.
chicago: Otte, Andreas, Eva Scheideler, and Franz-Josef Villmer. “Project Cost Estimator
- A Parameter-Based Tool to Predict Product Realization Costs at a Very Early
Stage.” In Department of Production Engineering and Management, edited
by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering
and Management, 281–92. Lemgo, 2016.
chicago-de: 'Otte, Andreas, Eva Scheideler und Franz-Josef Villmer. 2016. Project
Cost Estimator - A Parameter-Based Tool to Predict Product Realization Costs at
a Very Early Stage. In: Department of Production Engineering and Management,
hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering
and Management, 281–292. Lemgo.'
din1505-2-1: 'Otte, Andreas ; Scheideler, Eva ; Villmer,
Franz-Josef: Project Cost Estimator - A Parameter-Based Tool to Predict
Product Realization Costs at a Very Early Stage. In: Villmer,
F.-J. ; Padoano, E. ; Department of Production Engineering and Management
(Hrsg.): Department of Production Engineering and Management. Lemgo, 2016,
S. 281–292'
havard: 'A. Otte, E. Scheideler, F.-J. Villmer, Project Cost Estimator - A Parameter-Based
Tool to Predict Product Realization Costs at a Very Early Stage, in: F.-J. Villmer,
E. Padoano, Department of Production Engineering and Management (Eds.), Department
of Production Engineering and Management, Lemgo, 2016: pp. 281–292.'
ieee: A. Otte, E. Scheideler, and F.-J. Villmer, “Project Cost Estimator - A Parameter-Based
Tool to Predict Product Realization Costs at a Very Early Stage,” in Department
of Production Engineering and Management, Lemgo, 2016, no. 1, pp. 281–292.
mla: Otte, Andreas, et al. “Project Cost Estimator - A Parameter-Based Tool to Predict
Product Realization Costs at a Very Early Stage.” Department of Production
Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2016,
pp. 281–92.
short: 'A. Otte, E. Scheideler, F.-J. Villmer, in: F.-J. Villmer, E. Padoano, Department
of Production Engineering and Management (Eds.), Department of Production Engineering
and Management, Lemgo, 2016, pp. 281–292.'
ufg: 'Otte, Andreas et. al. (2016): Project Cost Estimator - A Parameter-Based
Tool to Predict Product Realization Costs at a Very Early Stage, in: Franz-Josef
Villmer et. al. (Hgg.): Department of Production Engineering and Management,
Lemgo, S. 281–292.'
van: 'Otte A, Scheideler E, Villmer F-J. Project Cost Estimator - A Parameter-Based
Tool to Predict Product Realization Costs at a Very Early Stage. In: Villmer F-J,
Padoano E, Department of Production Engineering and Management, editors. Department
of Production Engineering and Management. Lemgo; 2016. p. 281–92.'
conference:
end_date: 2016-09-30
location: Lemgo
name: Proceedings 6th International Conference
start_date: 2016-09-29
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-18T15:41:41Z
date_updated: 2023-03-15T13:50:03Z
department:
- _id: DEP7000
- _id: DEP1306
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
issue: '1'
keyword:
- Cost prediction
- Product realization projects
- Monte Carlo method
- Parametric cost model
- Software tool
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf
oa: '1'
page: 281-292
place: Lemgo
publication: Department of Production Engineering and Management
publication_identifier:
isbn:
- 978-3-946856-00-9
publication_status: published
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf
status: public
title: Project Cost Estimator - A Parameter-Based Tool to Predict Product Realization
Costs at a Very Early Stage
type: conference
user_id: '45673'
year: 2016
...
---
_id: '2128'
abstract:
- lang: eng
text: We present the concept of a perceptive motor in terms of a cyber-physical
system (CPS). A model application monitoring a knitting process was developed,
where the take-off of the produced fabric is controlled by an electric motor.
The idea is to equip a synchronous motor with a smart camera and appropriate image
processing hard- and software components. Subsequently, the characteristics of
knitted fabric are analysed by machine-learning (ML) methods. Our concept includes
motor-current analysis and image processing. The aim is to implement an assistance
system for the industrial large circular knitting process. An assistance system
will help to shorten the retrofitting process. The concept is based on a low cost
hardware approach for a smart camera, and stems from the recent development of
image processing applications for mobile devices [1–4].
author:
- first_name: Kristijan
full_name: Vukovic, Kristijan
last_name: Vukovic
- first_name: Kristina
full_name: Simonis, Kristina
last_name: Simonis
- first_name: Helene
full_name: Dörksen, Helene
id: '46416'
last_name: Dörksen
- first_name: Volker
full_name: Lohweg, Volker
id: '1804'
last_name: Lohweg
orcid: 0000-0002-3325-7887
citation:
ama: 'Vukovic K, Simonis K, Dörksen H, Lohweg V. Efficient Image Processing System
for an Industrial Machine Learning Task. In: Conference on Machine Learning
for Cyber-Physical Systems (ML4CPS). Fraunhofer Application Centre IOSB-INA,
Lemgo; 2015. doi:10.1007/978-3-662-48838-6_8'
apa: Vukovic, K., Simonis, K., Dörksen, H., & Lohweg, V. (2015). Efficient Image
Processing System for an Industrial Machine Learning Task. In Conference on
Machine Learning for Cyber-Physical Systems (ML4CPS). Fraunhofer Application
Centre IOSB-INA, Lemgo. https://doi.org/10.1007/978-3-662-48838-6_8
bjps: Vukovic K et al. (2015) Efficient Image Processing System for
an Industrial Machine Learning Task. Conference on Machine Learning for Cyber-Physical
Systems (ML4CPS). Fraunhofer Application Centre IOSB-INA, Lemgo.
chicago: Vukovic, Kristijan, Kristina Simonis, Helene Dörksen, and Volker Lohweg.
“Efficient Image Processing System for an Industrial Machine Learning Task.” In
Conference on Machine Learning for Cyber-Physical Systems (ML4CPS). Fraunhofer
Application Centre IOSB-INA, Lemgo, 2015. https://doi.org/10.1007/978-3-662-48838-6_8.
chicago-de: 'Vukovic, Kristijan, Kristina Simonis, Helene Dörksen und Volker Lohweg.
2015. Efficient Image Processing System for an Industrial Machine Learning Task.
In: Conference on Machine Learning for Cyber-Physical Systems (ML4CPS).
Fraunhofer Application Centre IOSB-INA, Lemgo. doi:10.1007/978-3-662-48838-6_8,
.'
din1505-2-1: 'Vukovic, Kristijan ;
Simonis, Kristina ; Dörksen,
Helene ; Lohweg, Volker:
Efficient Image Processing System for an Industrial Machine Learning Task. In:
Conference on Machine Learning for Cyber-Physical Systems (ML4CPS). Fraunhofer
Application Centre IOSB-INA, Lemgo, 2015'
havard: 'K. Vukovic, K. Simonis, H. Dörksen, V. Lohweg, Efficient Image Processing
System for an Industrial Machine Learning Task, in: Conference on Machine Learning
for Cyber-Physical Systems (ML4CPS), Fraunhofer Application Centre IOSB-INA, Lemgo,
2015.'
ieee: K. Vukovic, K. Simonis, H. Dörksen, and V. Lohweg, “Efficient Image Processing
System for an Industrial Machine Learning Task,” in Conference on Machine Learning
for Cyber-Physical Systems (ML4CPS), 2015.
mla: Vukovic, Kristijan, et al. “Efficient Image Processing System for an Industrial
Machine Learning Task.” Conference on Machine Learning for Cyber-Physical Systems
(ML4CPS), 2015, doi:10.1007/978-3-662-48838-6_8.
short: 'K. Vukovic, K. Simonis, H. Dörksen, V. Lohweg, in: Conference on Machine
Learning for Cyber-Physical Systems (ML4CPS), Fraunhofer Application Centre IOSB-INA,
Lemgo, 2015.'
ufg: 'Vukovic, Kristijan et. al. (2015): Efficient Image Processing System
for an Industrial Machine Learning Task, in: Conference on Machine Learning
for Cyber-Physical Systems (ML4CPS), Fraunhofer Application Centre IOSB-INA,
Lemgo.'
van: 'Vukovic K, Simonis K, Dörksen H, Lohweg V. Efficient Image Processing System
for an Industrial Machine Learning Task. In: Conference on Machine Learning for
Cyber-Physical Systems (ML4CPS). Fraunhofer Application Centre IOSB-INA, Lemgo;
2015.'
date_created: 2019-12-04T09:04:50Z
date_updated: 2023-03-15T13:49:38Z
department:
- _id: DEP5023
doi: 10.1007/978-3-662-48838-6_8
keyword:
- Assistance System
- Euler Number
- Synchronous Motor
- Image Processing System
- Image Processing Method
language:
- iso: eng
main_file_link:
- url: https://link.springer.com/chapter/10.1007/978-3-662-48838-6_8
place: Fraunhofer Application Centre IOSB-INA, Lemgo
publication: Conference on Machine Learning for Cyber-Physical Systems (ML4CPS)
status: public
title: Efficient Image Processing System for an Industrial Machine Learning Task
type: conference
user_id: '68554'
year: 2015
...
---
_id: '2312'
author:
- first_name: Franz-Joseph
full_name: Barthold, Franz-Joseph
last_name: Barthold
- first_name: Daniel
full_name: Materna, Daniel
id: '61906'
last_name: Materna
citation:
ama: Barthold F-J, Materna D. A modified extended finite element method approach
for design sensitivity analysis. International Journal for Numerical Methods
in Engineering. 2015;104(3):209-234. doi:10.1002/nme.4930
apa: Barthold, F.-J., & Materna, D. (2015). A modified extended finite element
method approach for design sensitivity analysis. International Journal for
Numerical Methods in Engineering, 104(3), 209–234. https://doi.org/10.1002/nme.4930
bjps: Barthold F-J and Materna D (2015) A Modified Extended Finite Element
Method Approach for Design Sensitivity Analysis. International Journal for
Numerical Methods in Engineering 104, 209–234.
chicago: 'Barthold, Franz-Joseph, and Daniel Materna. “A Modified Extended Finite
Element Method Approach for Design Sensitivity Analysis.” International Journal
for Numerical Methods in Engineering 104, no. 3 (2015): 209–34. https://doi.org/10.1002/nme.4930.'
chicago-de: 'Barthold, Franz-Joseph und Daniel Materna. 2015. A modified extended
finite element method approach for design sensitivity analysis. International
Journal for Numerical Methods in Engineering 104, Nr. 3: 209–234. doi:10.1002/nme.4930,
.'
din1505-2-1: 'Barthold, Franz-Joseph
; Materna, Daniel: A modified extended
finite element method approach for design sensitivity analysis. In: International
Journal for Numerical Methods in Engineering Bd. 104, Wiley Online Library
(2015), Nr. 3, S. 209–234'
havard: F.-J. Barthold, D. Materna, A modified extended finite element method approach
for design sensitivity analysis, International Journal for Numerical Methods in
Engineering. 104 (2015) 209–234.
ieee: F.-J. Barthold and D. Materna, “A modified extended finite element method
approach for design sensitivity analysis,” International Journal for Numerical
Methods in Engineering, vol. 104, no. 3, pp. 209–234, 2015.
mla: Barthold, Franz-Joseph, and Daniel Materna. “A Modified Extended Finite Element
Method Approach for Design Sensitivity Analysis.” International Journal for
Numerical Methods in Engineering, vol. 104, no. 3, Wiley Online Library, 2015,
pp. 209–34, doi:10.1002/nme.4930.
short: F.-J. Barthold, D. Materna, International Journal for Numerical Methods in
Engineering 104 (2015) 209–234.
ufg: 'Barthold, Franz-Joseph/Materna, Daniel (2015): A modified extended
finite element method approach for design sensitivity analysis, in: International
Journal for Numerical Methods in Engineering 104 (3), S. 209–234.'
van: Barthold F-J, Materna D. A modified extended finite element method approach
for design sensitivity analysis. International Journal for Numerical Methods in
Engineering. 2015;104(3):209–34.
date_created: 2020-05-15T07:51:45Z
date_updated: 2023-03-15T13:49:39Z
department:
- _id: DEP3020
doi: 10.1002/nme.4930
intvolume: ' 104'
issue: '3'
keyword:
- extended finite element method
- structural optimisation
- sensitivity analysis
language:
- iso: eng
main_file_link:
- url: https://onlinelibrary.wiley.com/doi/full/10.1002/nme.4930
page: 209-234
publication: International Journal for Numerical Methods in Engineering
publication_identifier:
eissn:
- 1097-0207
publication_status: published
publisher: Wiley Online Library
status: public
title: A modified extended finite element method approach for design sensitivity analysis
type: journal_article
user_id: '74004'
volume: 104
year: 2015
...
---
_id: '2070'
abstract:
- lang: eng
text: 'A Two-Layer Conflict Solving data fusion approach is proposed in this work,
with an aim to provide another approach to data fusion community. Since the evidence
of Dempster-Shafer Theory, algorithms for combining pieces of evidence have drawn
a considerable attention from data fusion researchers, along with many alternatives
invented. However, none of these approaches receive an agreement for being able
to perform very successfully in all scenarios and hence this topic is still in
hot discussion. Therefore, the suggested approach in this work will contribute
as a novel method and present its own merits. '
author:
- first_name: Rui
full_name: Li, Rui
id: '2000'
last_name: Li
- first_name: Volker
full_name: Lohweg, Volker
id: '1804'
last_name: Lohweg
orcid: 0000-0002-3325-7887
citation:
ama: 'Li R, Lohweg V. A Novel Data Fusion Approach using Two-Layer Conflict Solving.
In: ; 2008.'
apa: Li, R., & Lohweg, V. (2008). A Novel Data Fusion Approach using Two-Layer
Conflict Solving.
bjps: Li R and Lohweg V (2008) A Novel Data Fusion Approach Using Two-Layer
Conflict Solving.
chicago: Li, Rui, and Volker Lohweg. “A Novel Data Fusion Approach Using Two-Layer
Conflict Solving,” 2008.
chicago-de: 'Li, Rui und Volker Lohweg. 2008. A Novel Data Fusion Approach using
Two-Layer Conflict Solving. In: .'
din1505-2-1: 'Li, Rui ; Lohweg,
Volker: A Novel Data Fusion Approach using Two-Layer Conflict Solving.
In: , 2008'
havard: 'R. Li, V. Lohweg, A Novel Data Fusion Approach using Two-Layer Conflict
Solving, in: 2008.'
ieee: R. Li and V. Lohweg, “A Novel Data Fusion Approach using Two-Layer Conflict
Solving,” 2008.
mla: Li, Rui, and Volker Lohweg. A Novel Data Fusion Approach Using Two-Layer
Conflict Solving. 2008.
short: 'R. Li, V. Lohweg, in: 2008.'
ufg: 'Li, Rui/Lohweg, Volker (2008): A Novel Data Fusion Approach using Two-Layer
Conflict Solving, in: .'
van: Li R, Lohweg V. A Novel Data Fusion Approach using Two-Layer Conflict Solving.
In 2008.
date_created: 2019-11-29T14:05:44Z
date_updated: 2023-03-15T13:49:38Z
department:
- _id: DEP5023
keyword:
- fusion community
- data fusion researcher
- dempster-shafer theory
- many alternative
- novel method
- considerable attention
- hot discussion
- suggested approach
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.eurasip.org/Proceedings/Ext/CIP2008/papers/1569094849.pdf
oa: '1'
publication_status: published
status: public
title: A Novel Data Fusion Approach using Two-Layer Conflict Solving
type: conference
user_id: '45673'
year: 2008
...