---
_id: '13495'
abstract:
- lang: eng
text: The use of additive manufacturing for rapid prototyping of near-infrared and
terahertz components provides seamless and error-free production. This article
discusses the additive manufacturing and post-processing of axicons and their
performance evaluation using attenuation and near-field-measurements based fundamental
techniques. The axicons are manufactured using the materials cyclic olefin copolymer
(TOPAS) and polymethyl methacrylate (PMMA), for their respective use in terahertz
and near-infrared applications. The optical and terahertz components manufactured
using traditional 3D-printing processes, e.g., fused filament fabrication or stereolithography
apparatus exhibit high surface roughness in the range of 15 ± 2.5 µm, resulting
in undesired propagation and scattering in the near infrared wavelengths. This
research work proposes an economical post-processing technique for additively
manufactured terahertz and near-infrared axicons for applications in multispectral
characterization, e.g., bio-sensing. The authors used an enhanced method of dip-coating,
which involves interval dipping and intermittent hardening to achieve better surface
finish. An emphasis is placed on interval dipping and intermittent hardening,
which lead to excellent transparency in case of additively-manufactured near-infrared
axicons. The dip-coated samples exhibit surface roughness below 10 nm. With the
use of heated resin material as the coating layer, due to reduced viscosity, the
resin material distributes uniformly over the surface of the 3D-printed terahertz
and near-infrared axicons. The authors also observed that the DOF length deviation
between unprocessed and enhanced dip-coated axicons remains within the measurement
error estimation from analytical calculations. In addition to the improved surface
finish and transparency, the coatings are also closely matched in refractive index
to the axicon material. Such post-processed axicons pave the way for producing
a wide array of systems in the fields of communication, imaging, and bio-sensing.
article_number: '264'
author:
- first_name: Abhijeet Narendra
full_name: Shrotri, Abhijeet Narendra
id: '74090'
last_name: Shrotri
orcid: 0000-0003-2116-156X
- first_name: Annamarija
full_name: Starsaja, Annamarija
last_name: Starsaja
- first_name: Suraj
full_name: Joshi, Suraj
last_name: Joshi
- first_name: Sascha
full_name: Preu, Sascha
last_name: Preu
- first_name: Oliver
full_name: Stübbe, Oliver
id: '51864'
last_name: Stübbe
orcid: 0000-0001-7293-6893
citation:
ama: Shrotri AN, Starsaja A, Joshi S, Preu S, Stübbe O. Multispectral Characterization
of Additively Manufactured and Dip-Coated Axicons. Photonics. 2026;13(3).
doi:10.3390/photonics13030264
apa: Shrotri, A. N., Starsaja, A., Joshi, S., Preu, S., & Stübbe, O. (2026).
Multispectral Characterization of Additively Manufactured and Dip-Coated Axicons.
Photonics, 13(3), Article 264. https://doi.org/10.3390/photonics13030264
bjps: Shrotri AN et al. (2026) Multispectral Characterization of Additively
Manufactured and Dip-Coated Axicons. Photonics 13.
chicago: Shrotri, Abhijeet Narendra, Annamarija Starsaja, Suraj Joshi, Sascha Preu,
and Oliver Stübbe. “Multispectral Characterization of Additively Manufactured
and Dip-Coated Axicons.” Photonics 13, no. 3 (2026). https://doi.org/10.3390/photonics13030264.
chicago-de: Shrotri, Abhijeet Narendra, Annamarija Starsaja, Suraj Joshi, Sascha
Preu und Oliver Stübbe. 2026. Multispectral Characterization of Additively Manufactured
and Dip-Coated Axicons. Photonics 13, Nr. 3. doi:10.3390/photonics13030264,
.
din1505-2-1: 'Shrotri, Abhijeet Narendra
; Starsaja, Annamarija ; Joshi,
Suraj ; Preu, Sascha ; Stübbe, Oliver: Multispectral Characterization
of Additively Manufactured and Dip-Coated Axicons. In: Photonics Bd. 13.
Basel, MDPI AG (2026), Nr. 3'
havard: A.N. Shrotri, A. Starsaja, S. Joshi, S. Preu, O. Stübbe, Multispectral Characterization
of Additively Manufactured and Dip-Coated Axicons, Photonics. 13 (2026).
ieee: 'A. N. Shrotri, A. Starsaja, S. Joshi, S. Preu, and O. Stübbe, “Multispectral
Characterization of Additively Manufactured and Dip-Coated Axicons,” Photonics,
vol. 13, no. 3, Art. no. 264, 2026, doi: 10.3390/photonics13030264.'
mla: Shrotri, Abhijeet Narendra, et al. “Multispectral Characterization of Additively
Manufactured and Dip-Coated Axicons.” Photonics, vol. 13, no. 3, 264, 2026,
https://doi.org/10.3390/photonics13030264.
short: A.N. Shrotri, A. Starsaja, S. Joshi, S. Preu, O. Stübbe, Photonics 13 (2026).
ufg: 'Shrotri, Abhijeet Narendra u. a.: Multispectral Characterization of
Additively Manufactured and Dip-Coated Axicons, in: Photonics 13 (2026),
H. 3.'
van: Shrotri AN, Starsaja A, Joshi S, Preu S, Stübbe O. Multispectral Characterization
of Additively Manufactured and Dip-Coated Axicons. Photonics. 2026;13(3).
date_created: 2026-03-12T07:07:54Z
date_updated: 2026-03-12T07:12:29Z
department:
- _id: DEP5020
- _id: DEP6020
doi: 10.3390/photonics13030264
intvolume: ' 13'
issue: '3'
keyword:
- additive manufacturing
- stereolithography
- dip-coating
- post-processing
language:
- iso: eng
place: Basel
publication: Photonics
publication_identifier:
issn:
- 2304-6732
publication_status: published
publisher: MDPI AG
status: public
title: Multispectral Characterization of Additively Manufactured and Dip-Coated Axicons
type: scientific_journal_article
user_id: '83781'
volume: 13
year: '2026'
...
---
_id: '13346'
abstract:
- lang: eng
text: This article discusses the additive manufacturing and post-processing of axicons,
and their performance evaluation using attenuation and near-field-measurements
based fundamental techniques. The axicons are manufactured using the materials
cyclic olefin copolymer (TOPAS) and polymethyl methacrylate (PMMA), for their
respective use in terahertz and near-infrared applications. An emphasis is placed
on the dip-coating-based post-processing. Interval dipping and intermittent hardening
lead to excellent surface finish and transparency in case of additively-manufactured
near-infrared axicons. The dip-coated samples exhibit surface roughness of sub
10nm, and a uniformly distributed thin layer coating over the axicon surface.
In addition to the improved surface finish and transparency, the coatings are
also closely matched in refractive index to the axicon material. Such post-processed
axicons pave the way for rapid-prototyping and production.
author:
- first_name: Abhijeet Narendra
full_name: Shrotri, Abhijeet Narendra
id: '74090'
last_name: Shrotri
orcid: 0000-0003-2116-156X
- first_name: Annamarija
full_name: Starsaja, Annamarija
last_name: Starsaja
- first_name: Suraj
full_name: Joshi, Suraj
last_name: Joshi
- first_name: 'Sascha '
full_name: 'Preu, Sascha '
last_name: Preu
- first_name: Oliver
full_name: Stübbe, Oliver
id: '51864'
last_name: Stübbe
orcid: 0000-0001-7293-6893
citation:
ama: Shrotri AN, Starsaja A, Joshi S, Preu S, Stübbe O. Multispectral characterization
of additively manufactured and dip-coated axicons. Optica Open. Published
online 2026. doi:https://doi.org/10.1364/opticaopen.31149016
apa: Shrotri, A. N., Starsaja, A., Joshi, S., Preu, S., & Stübbe, O. (2026).
Multispectral characterization of additively manufactured and dip-coated axicons.
In Optica Open. Optica Publishing Group. https://doi.org/10.1364/opticaopen.31149016
bjps: Shrotri AN et al. (2026) Multispectral Characterization of Additively
Manufactured and Dip-Coated Axicons. Optica Open.
chicago: Shrotri, Abhijeet Narendra, Annamarija Starsaja, Suraj Joshi, Sascha Preu,
and Oliver Stübbe. “Multispectral Characterization of Additively Manufactured
and Dip-Coated Axicons.” Optica Open. Optica Publishing Group, 2026. https://doi.org/10.1364/opticaopen.31149016.
chicago-de: Shrotri, Abhijeet Narendra, Annamarija Starsaja, Suraj Joshi, Sascha Preu
und Oliver Stübbe. 2026. Multispectral characterization of additively manufactured
and dip-coated axicons. Optica Open. Optica Publishing Group. doi:https://doi.org/10.1364/opticaopen.31149016,
.
din1505-2-1: 'Shrotri, Abhijeet Narendra
; Starsaja, Annamarija ; Joshi,
Suraj ; Preu, Sascha ; Stübbe, Oliver: Multispectral characterization
of additively manufactured and dip-coated axicons. In: Optica Open, Optica
Publishing Group (2026)'
havard: A.N. Shrotri, A. Starsaja, S. Joshi, S. Preu, O. Stübbe, Multispectral characterization
of additively manufactured and dip-coated axicons, Optica Open. (2026).
ieee: 'A. N. Shrotri, A. Starsaja, S. Joshi, S. Preu, and O. Stübbe, “Multispectral
characterization of additively manufactured and dip-coated axicons,” Optica
Open. Optica Publishing Group, 2026. doi: https://doi.org/10.1364/opticaopen.31149016.'
mla: Shrotri, Abhijeet Narendra, et al. “Multispectral Characterization of Additively
Manufactured and Dip-Coated Axicons.” Optica Open, Optica Publishing Group,
2026, https://doi.org/10.1364/opticaopen.31149016.
short: A.N. Shrotri, A. Starsaja, S. Joshi, S. Preu, O. Stübbe, Optica Open (2026).
ufg: 'Shrotri, Abhijeet Narendra u. a.: Multispectral characterization of
additively manufactured and dip-coated axicons, in: Optica Openo. O. 2026.'
van: Shrotri AN, Starsaja A, Joshi S, Preu S, Stübbe O. Multispectral characterization
of additively manufactured and dip-coated axicons. Optica Open. Optica Publishing
Group; 2026.
date_created: 2026-01-27T11:53:40Z
date_updated: 2026-02-10T10:16:40Z
department:
- _id: DEP5020
- _id: DEP6020
doi: https://doi.org/10.1364/opticaopen.31149016
keyword:
- additive manufacturing
- stereolithography
- dip-coating
- post-processing
language:
- iso: eng
page: '5'
publication: Optica Open
publication_identifier:
eissn:
- '2334-2536 '
publication_status: published
publisher: Optica Publishing Group
status: public
title: Multispectral characterization of additively manufactured and dip-coated axicons
type: preprint
user_id: '83781'
year: '2026'
...
---
_id: '13363'
abstract:
- lang: eng
text: This article discusses the additive manufacturing and post-processing of axicons,
and their performance evaluation using attenuation and near-field-measurements
based fundamental techniques. The axicons are manufactured using the materials
cyclic olefin copolymer (TOPAS) and polymethyl methacrylate (PMMA), for their
respective use in terahertz and near-infrared applications. An emphasis is placed
on the dip-coating-based post-processing. Interval dipping and intermittent hardening
lead to excellent surface finish and transparency in case of additively-manufactured
near-infrared axicons. The dip-coated samples exhibit surface roughness of sub
10 nm, and a uniformly distributed thin layer coating over the axicon surface.
In addition to the improved surface finish and transparency, the coatings are
also closely matched in refractive index to the axicon material. Such post-processed
axicons pave the way for rapid-prototyping and production.
author:
- first_name: Abhijeet Narendra
full_name: Shrotri, Abhijeet Narendra
id: '74090'
last_name: Shrotri
orcid: 0000-0003-2116-156X
- first_name: Annamarija
full_name: Starsaja, Annamarija
last_name: Starsaja
- first_name: 'Suraj '
full_name: 'Joshi, Suraj '
last_name: Joshi
- first_name: Sascha
full_name: Preu, Sascha
last_name: Preu
- first_name: Oliver
full_name: Stübbe, Oliver
id: '51864'
last_name: Stübbe
orcid: 0000-0001-7293-6893
citation:
ama: 'Shrotri AN, Starsaja A, Joshi S, Preu S, Stübbe O. Multispectral Characterization
of Additively Manufactured and Dip-Coated Axicons. Photonics: Open Access Journal.
Published online 2026. doi:https://doi.org/10.20944/preprints202602.0389.v1'
apa: 'Shrotri, A. N., Starsaja, A., Joshi, S., Preu, S., & Stübbe, O. (2026).
Multispectral Characterization of Additively Manufactured and Dip-Coated Axicons.
In Photonics: Open Access Journal. MDPI . https://doi.org/10.20944/preprints202602.0389.v1'
bjps: 'Shrotri AN et al. (2026) Multispectral Characterization of
Additively Manufactured and Dip-Coated Axicons. Photonics: Open Access Journal.'
chicago: 'Shrotri, Abhijeet Narendra, Annamarija Starsaja, Suraj Joshi, Sascha
Preu, and Oliver Stübbe. “Multispectral Characterization of Additively Manufactured
and Dip-Coated Axicons.” Photonics: Open Access Journal. MDPI , 2026. https://doi.org/10.20944/preprints202602.0389.v1.'
chicago-de: 'Shrotri, Abhijeet Narendra, Annamarija Starsaja, Suraj Joshi, Sascha
Preu und Oliver Stübbe. 2026. Multispectral Characterization of Additively Manufactured
and Dip-Coated Axicons. Photonics: Open Access Journal. MDPI . doi:https://doi.org/10.20944/preprints202602.0389.v1,
.'
din1505-2-1: 'Shrotri, Abhijeet Narendra
; Starsaja, Annamarija ; Joshi,
Suraj ; Preu, Sascha ; Stübbe, Oliver: Multispectral Characterization
of Additively Manufactured and Dip-Coated Axicons. In: Photonics: Open Access
Journal, MDPI (2026)'
havard: 'A.N. Shrotri, A. Starsaja, S. Joshi, S. Preu, O. Stübbe, Multispectral
Characterization of Additively Manufactured and Dip-Coated Axicons, Photonics:
Open Access Journal. (2026).'
ieee: 'A. N. Shrotri, A. Starsaja, S. Joshi, S. Preu, and O. Stübbe, “Multispectral
Characterization of Additively Manufactured and Dip-Coated Axicons,” Photonics:
Open Access Journal. MDPI , 2026. doi: https://doi.org/10.20944/preprints202602.0389.v1.'
mla: 'Shrotri, Abhijeet Narendra, et al. “Multispectral Characterization of Additively
Manufactured and Dip-Coated Axicons.” Photonics: Open Access Journal, MDPI
, 2026, https://doi.org/10.20944/preprints202602.0389.v1.'
short: 'A.N. Shrotri, A. Starsaja, S. Joshi, S. Preu, O. Stübbe, Photonics: Open
Access Journal (2026).'
ufg: 'Shrotri, Abhijeet Narendra u. a.: Multispectral Characterization of
Additively Manufactured and Dip-Coated Axicons, in: Photonics: Open Access
Journalo. O. 2026.'
van: 'Shrotri AN, Starsaja A, Joshi S, Preu S, Stübbe O. Multispectral Characterization
of Additively Manufactured and Dip-Coated Axicons. Photonics: Open Access Journal.
MDPI ; 2026.'
date_created: 2026-02-09T14:25:17Z
date_updated: 2026-02-10T10:12:11Z
department:
- _id: DEP5020
- _id: DEP6020
doi: https://doi.org/10.20944/preprints202602.0389.v1
keyword:
- additive manufacturing
- stereolithography
- dip-coating
- post-processing
language:
- iso: eng
page: '15'
publication: 'Photonics: Open Access Journal'
publication_identifier:
eissn:
- '2304-6732 '
publication_status: published
publisher: 'MDPI '
status: public
title: Multispectral Characterization of Additively Manufactured and Dip-Coated Axicons
type: preprint
user_id: '83781'
year: '2026'
...
---
_id: '12424'
abstract:
- lang: eng
text: Additive manufacturing of optical, electrical, and mechanical components is
a beneficial approach for the rapid prototyping of components and error elimination,
with short turnaround times. However, additively manufactured components usually
have rough surfaces that need post-processing, particularly for optical components,
where the surface roughness must be a small fraction of the wavelength. We demonstrate
an innovative and economical approach by dip-coating with the same resin used
for printing in a simple post-processing step, providing high transparency to
the 3D-printed optical components and reducing surface roughness while achieving
perfect index matching of the coating layer. The surface roughness of the 3D-printed
optical components drops to 5 nm (arithmetic average) after the dip-coating process.
We observed significant performance enhancements after comparing the unprocessed
optical components and the dip-coated optical components, including optical transparency
and a shiny surface finish for previously rough surfaces.
article_number: '210'
author:
- first_name: Abhijeet Narendra
full_name: Shrotri, Abhijeet Narendra
id: '74090'
last_name: Shrotri
orcid: 0000-0003-2116-156X
- first_name: Sascha
full_name: Preu, Sascha
last_name: Preu
- first_name: Oliver
full_name: Stübbe, Oliver
id: '51864'
last_name: Stübbe
orcid: 0000-0001-7293-6893
citation:
ama: 'Shrotri AN, Preu S, Stübbe O. Achieving Transparency and Minimizing Losses
of Rough Additively Manufactured Optical Components by a Dip-Coating Surface Finish.
Coatings : open access journal. 2025;15(2). doi:10.3390/coatings15020210'
apa: 'Shrotri, A. N., Preu, S., & Stübbe, O. (2025). Achieving Transparency
and Minimizing Losses of Rough Additively Manufactured Optical Components by a
Dip-Coating Surface Finish. Coatings : Open Access Journal, 15(2),
Article 210. https://doi.org/10.3390/coatings15020210'
bjps: 'Shrotri AN, Preu S and Stübbe O (2025) Achieving Transparency and
Minimizing Losses of Rough Additively Manufactured Optical Components by a Dip-Coating
Surface Finish. Coatings : open access journal 15.'
chicago: 'Shrotri, Abhijeet Narendra, Sascha Preu, and Oliver Stübbe. “Achieving
Transparency and Minimizing Losses of Rough Additively Manufactured Optical Components
by a Dip-Coating Surface Finish.” Coatings : Open Access Journal 15, no.
2 (2025). https://doi.org/10.3390/coatings15020210.'
chicago-de: 'Shrotri, Abhijeet Narendra, Sascha Preu und Oliver Stübbe. 2025. Achieving
Transparency and Minimizing Losses of Rough Additively Manufactured Optical Components
by a Dip-Coating Surface Finish. Coatings : open access journal 15, Nr.
2. doi:10.3390/coatings15020210,
.'
din1505-2-1: 'Shrotri, Abhijeet Narendra
; Preu, Sascha ; Stübbe,
Oliver: Achieving Transparency and Minimizing Losses of Rough Additively
Manufactured Optical Components by a Dip-Coating Surface Finish. In: Coatings :
open access journal Bd. 15. Basel, MDPI AG (2025), Nr. 2'
havard: 'A.N. Shrotri, S. Preu, O. Stübbe, Achieving Transparency and Minimizing
Losses of Rough Additively Manufactured Optical Components by a Dip-Coating Surface
Finish, Coatings : Open Access Journal. 15 (2025).'
ieee: 'A. N. Shrotri, S. Preu, and O. Stübbe, “Achieving Transparency and Minimizing
Losses of Rough Additively Manufactured Optical Components by a Dip-Coating Surface
Finish,” Coatings : open access journal, vol. 15, no. 2, Art. no. 210,
2025, doi: 10.3390/coatings15020210.'
mla: 'Shrotri, Abhijeet Narendra, et al. “Achieving Transparency and Minimizing
Losses of Rough Additively Manufactured Optical Components by a Dip-Coating Surface
Finish.” Coatings : Open Access Journal, vol. 15, no. 2, 210, 2025, https://doi.org/10.3390/coatings15020210.'
short: 'A.N. Shrotri, S. Preu, O. Stübbe, Coatings : Open Access Journal 15 (2025).'
ufg: 'Shrotri, Abhijeet Narendra/Preu, Sascha/Stübbe, Oliver: Achieving Transparency
and Minimizing Losses of Rough Additively Manufactured Optical Components by a
Dip-Coating Surface Finish, in: Coatings : open access journal 15 (2025),
H. 2.'
van: 'Shrotri AN, Preu S, Stübbe O. Achieving Transparency and Minimizing Losses
of Rough Additively Manufactured Optical Components by a Dip-Coating Surface Finish.
Coatings : open access journal. 2025;15(2).'
date_created: 2025-02-11T11:56:38Z
date_updated: 2025-02-12T08:37:34Z
department:
- _id: DEP5020
- _id: DEP6020
doi: 10.3390/coatings15020210
intvolume: ' 15'
issue: '2'
keyword:
- additive manufacturing
- post-processing
- optics
- dip-coating
language:
- iso: eng
place: Basel
publication: 'Coatings : open access journal'
publication_identifier:
issn:
- 2079-6412
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: Achieving Transparency and Minimizing Losses of Rough Additively Manufactured
Optical Components by a Dip-Coating Surface Finish
type: scientific_journal_article
user_id: '83781'
volume: 15
year: '2025'
...
---
_id: '13029'
abstract:
- lang: eng
text: "Additive manufacturing of optical, electrical and mechanical components is
a beneficial approach for rapid prototyping of components and error elimination
with short turn around times. However, additively manufactured components usually
have rough surfaces which need post-processing, in particular for optical components
where the surface roughness must be a small fraction of the wavelength. We demonstrate
an innovative and economical approach by dip-coating with the same\r\nresin as
used for printing, providing high transparency of the 3D-printed optical components
and reduced surface roughness with perfect index matching of the coating layer
in a simple post processing step. The surface roughness of the 3D-printed optical
components drops to 5 nm (arithmetic average) after the dip-coating process. We
observed significant performance enhancement after comparing the unprocessed optical
components and dip-coated optical components, including achieving optical transparency
and shiny surface finish of previously rough surfaces."
author:
- first_name: Abhijeet Narendra
full_name: Shrotri, Abhijeet Narendra
id: '74090'
last_name: Shrotri
orcid: 0000-0003-2116-156X
- first_name: Sascha
full_name: Preu, Sascha
last_name: Preu
- first_name: Oliver
full_name: Stübbe, Oliver
id: '51864'
last_name: Stübbe
orcid: 0000-0001-7293-6893
citation:
ama: 'Shrotri AN, Preu S, Stübbe O. Achieving Transparency and Minimizing Loss of
Rough Additively Manufactured Optical Components by a Dip-Coating Surface Finish.
Coatings : open access journal. Published online 2025. doi:10.20944/preprints202501.1899.v1'
apa: 'Shrotri, A. N., Preu, S., & Stübbe, O. (2025). Achieving Transparency
and Minimizing Loss of Rough Additively Manufactured Optical Components by a Dip-Coating
Surface Finish. In Coatings : open access journal. MDPI. https://doi.org/10.20944/preprints202501.1899.v1'
bjps: 'Shrotri AN, Preu S and Stübbe O (2025) Achieving Transparency and
Minimizing Loss of Rough Additively Manufactured Optical Components by a Dip-Coating
Surface Finish. Coatings : open access journal.'
chicago: 'Shrotri, Abhijeet Narendra, Sascha Preu, and Oliver Stübbe. “Achieving
Transparency and Minimizing Loss of Rough Additively Manufactured Optical Components
by a Dip-Coating Surface Finish.” Coatings : Open Access Journal. MDPI,
2025. https://doi.org/10.20944/preprints202501.1899.v1.'
chicago-de: 'Shrotri, Abhijeet Narendra, Sascha Preu und Oliver Stübbe. 2025. Achieving
Transparency and Minimizing Loss of Rough Additively Manufactured Optical Components
by a Dip-Coating Surface Finish. Coatings : open access journal. MDPI.
doi:10.20944/preprints202501.1899.v1,
.'
din1505-2-1: 'Shrotri, Abhijeet Narendra
; Preu, Sascha ; Stübbe,
Oliver: Achieving Transparency and Minimizing Loss of Rough Additively
Manufactured Optical Components by a Dip-Coating Surface Finish. In: Coatings :
open access journal, MDPI (2025)'
havard: 'A.N. Shrotri, S. Preu, O. Stübbe, Achieving Transparency and Minimizing
Loss of Rough Additively Manufactured Optical Components by a Dip-Coating Surface
Finish, Coatings : Open Access Journal. (2025).'
ieee: 'A. N. Shrotri, S. Preu, and O. Stübbe, “Achieving Transparency and Minimizing
Loss of Rough Additively Manufactured Optical Components by a Dip-Coating Surface
Finish,” Coatings : open access journal. MDPI, 2025. doi: 10.20944/preprints202501.1899.v1.'
mla: 'Shrotri, Abhijeet Narendra, et al. “Achieving Transparency and Minimizing
Loss of Rough Additively Manufactured Optical Components by a Dip-Coating Surface
Finish.” Coatings : Open Access Journal, MDPI, 2025, https://doi.org/10.20944/preprints202501.1899.v1.'
short: 'A.N. Shrotri, S. Preu, O. Stübbe, Coatings : Open Access Journal (2025).'
ufg: 'Shrotri, Abhijeet Narendra/Preu, Sascha/Stübbe, Oliver: Achieving Transparency
and Minimizing Loss of Rough Additively Manufactured Optical Components by a Dip-Coating
Surface Finish, in: Coatings : open access journalo. O. 2025.'
van: 'Shrotri AN, Preu S, Stübbe O. Achieving Transparency and Minimizing Loss of
Rough Additively Manufactured Optical Components by a Dip-Coating Surface Finish.
Coatings : open access journal. MDPI; 2025.'
date_created: 2025-06-30T07:39:43Z
date_updated: 2025-07-01T06:38:44Z
ddc:
- '620'
department:
- _id: DEP5020
- _id: DEP6020
doi: 10.20944/preprints202501.1899.v1
has_accepted_license: '1'
keyword:
- additive manufacturing
- post-processing
- optics
- dip-coating
language:
- iso: eng
page: '10'
publication: 'Coatings : open access journal'
publication_status: published
publisher: MDPI
status: public
title: Achieving Transparency and Minimizing Loss of Rough Additively Manufactured
Optical Components by a Dip-Coating Surface Finish
type: preprint
user_id: '83781'
year: '2025'
...
---
_id: '11997'
abstract:
- lang: eng
text: "In Germany, individuals unable or not yet able to return to the general labor
market due to disabilities are employed in sheltered workshops which are called
WfbM (“Werkstätten für behinderte Menschen”). These organizations are required
to earn the wages for the aforementioned group of people by offering market services.
These services include, in particular, assembly activities. However, WfbM face
the challenge that customer orders tend to become more complex, especially as
a result of an increased number of product variants. This development not only
has an impact on the work in WfbM, but also makes it much more difficult to achieve
the desired inclusion of people with disabilities in the general labor market.
Bearing this in mind, the research question addressed in this article can be stated
as such: How far can the use of an informational assistance system compensate
for performance deficits of people with disabilities in the context of assembly?
The results of the conducted laboratory study show that the implementation of
an assistance system can help to reduce existing barriers and challenges resulting
from the mismatch between requirements of the general labor market and the performance
characteristics of people with cognitive impairments.\r\nPractical Relevance:
For people with disabilities, the use of assistance systems opens up new opportunities
for participation in the general labor market and thus makes an important contribution
to implementing the requirements of the “Bundesteilhabegesetz” (a law to strengthen
participation of people with disabilities in Germany)."
- lang: ger
text: "In Deutschland werden Personen, die aufgrund von Beeinträchtigungen nicht
bzw. noch nicht wieder auf dem allgemeinen Arbeitsmarkt tätig sein können, in
einer „Werkstatt für behinderte Menschen (WfbM)“ beschäftigt. Diese Einrichtungen
müssen die Arbeitsentgelte für den genannten Personenkreis durch am Markt angebotene
Leistungen selbst erwirtschaften. Zu diesen Leistungen zählen vor allem Montagetätigkeiten.
Allerdings stehen WfbM vor der Herausforderung, dass Kundenaufträge insbesondere
infolge einer gestiegenen Variantenvielfalt tendenziell komplexer werden. Diese
Entwicklung wirkt sich nicht nur auf die Arbeit in den Werkstätten aus, sondern
hat auch zur Folge, dass die angestrebte Inklusion von Personen mit Unterstützungsbedarfen
in den allgemeinen Arbeitsmarkt deutlich erschwert wird. Vor diesem Hintergrund
wird in dem Beitrag der Forschungsfrage nachgegangen, inwieweit der Einsatz eines
informatorischen Assistenzsystems Leistungsdefizite von Personen mit Unterstützungsbedarfen
im Kontext der Montage ausgleichen kann. Die Ergebnisse der durchgeführten Laborstudie
zeigen, dass die Einführung eines Assistenzsystems dazu beitragen kann, bestehende
Barrieren, die sich aus der Inkongruenz zwischen den Anforderungen des allgemeinen
Arbeitsmarktes und den Leistungsmerkmalen von Personen mit kognitiven Beeinträchtigungen
ergeben, abzubauen.\r\n\r\nPraktische Relevanz: Der Einsatz von informatorischen
Assistenzsystemen kann Personen mit Unterstützungsbedarfen eine Teilhabe am Arbeitsleben
ermöglichen und leistet damit einen wichtigen Beitrag zur Umsetzung des Bundesteilhabegesetzes."
article_type: review
author:
- first_name: Sven
full_name: Bendzioch, Sven
id: '71395'
last_name: Bendzioch
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
citation:
ama: Bendzioch S, Hinrichsen S. Potentials of an informational assembly assistance
system for persons with cognitive disabilities — Results of a laboratory study.
Zeitschrift für Arbeitswissenschaft (ZfA). 2024;78(2):240-253. doi:10.1007/s41449-024-00414-9
apa: Bendzioch, S., & Hinrichsen, S. (2024). Potentials of an informational
assembly assistance system for persons with cognitive disabilities — Results of
a laboratory study. Zeitschrift Für Arbeitswissenschaft (ZfA), 78(2),
240–253. https://doi.org/10.1007/s41449-024-00414-9
bjps: Bendzioch S and Hinrichsen S (2024) Potentials of an Informational
Assembly Assistance System for Persons with Cognitive Disabilities — Results of
a Laboratory Study. Zeitschrift für Arbeitswissenschaft (ZfA) 78,
240–253.
chicago: 'Bendzioch, Sven, and Sven Hinrichsen. “Potentials of an Informational
Assembly Assistance System for Persons with Cognitive Disabilities — Results of
a Laboratory Study.” Zeitschrift Für Arbeitswissenschaft (ZfA) 78, no.
2 (2024): 240–53. https://doi.org/10.1007/s41449-024-00414-9.'
chicago-de: 'Bendzioch, Sven und Sven Hinrichsen. 2024. Potentials of an informational
assembly assistance system for persons with cognitive disabilities — Results of
a laboratory study. Zeitschrift für Arbeitswissenschaft (ZfA) 78, Nr. 2:
240–253. doi:10.1007/s41449-024-00414-9,
.'
din1505-2-1: 'Bendzioch, Sven ; Hinrichsen, Sven: Potentials of an informational
assembly assistance system for persons with cognitive disabilities — Results of
a laboratory study. In: Zeitschrift für Arbeitswissenschaft (ZfA) Bd. 78.
Heidelberg, Springer-Verlag GmbH (2024), Nr. 2, S. 240–253'
havard: S. Bendzioch, S. Hinrichsen, Potentials of an informational assembly assistance
system for persons with cognitive disabilities — Results of a laboratory study,
Zeitschrift Für Arbeitswissenschaft (ZfA). 78 (2024) 240–253.
ieee: 'S. Bendzioch and S. Hinrichsen, “Potentials of an informational assembly
assistance system for persons with cognitive disabilities — Results of a laboratory
study,” Zeitschrift für Arbeitswissenschaft (ZfA), vol. 78, no. 2, pp.
240–253, 2024, doi: 10.1007/s41449-024-00414-9.'
mla: Bendzioch, Sven, and Sven Hinrichsen. “Potentials of an Informational Assembly
Assistance System for Persons with Cognitive Disabilities — Results of a Laboratory
Study.” Zeitschrift Für Arbeitswissenschaft (ZfA), vol. 78, no. 2, 2024,
pp. 240–53, https://doi.org/10.1007/s41449-024-00414-9.
short: S. Bendzioch, S. Hinrichsen, Zeitschrift Für Arbeitswissenschaft (ZfA) 78
(2024) 240–253.
ufg: 'Bendzioch, Sven/Hinrichsen, Sven: Potentials of an informational assembly
assistance system for persons with cognitive disabilities — Results of a laboratory
study, in: Zeitschrift für Arbeitswissenschaft (ZfA) 78 (2024), H. 2,
S. 240–253.'
van: Bendzioch S, Hinrichsen S. Potentials of an informational assembly assistance
system for persons with cognitive disabilities — Results of a laboratory study.
Zeitschrift für Arbeitswissenschaft (ZfA). 2024;78(2):240–53.
date_created: 2024-10-17T10:43:31Z
date_updated: 2026-01-09T07:39:04Z
department:
- _id: DEP7020
- _id: DEP1305
doi: 10.1007/s41449-024-00414-9
intvolume: ' 78'
issue: '2'
keyword:
- Informational Assistance System
- People with Disabilities
- Manual Assembly
- Image Processing System
- Laboratory Study
language:
- iso: eng
page: 240-253
place: Heidelberg
publication: Zeitschrift für Arbeitswissenschaft (ZfA)
publication_identifier:
eissn:
- 2366-4681
issn:
- 0340-2444
publication_status: published
publisher: 'Springer-Verlag GmbH '
quality_controlled: '1'
status: public
title: Potentials of an informational assembly assistance system for persons with
cognitive disabilities — Results of a laboratory study
type: scientific_journal_article
user_id: '49010'
volume: 78
year: '2024'
...
---
_id: '10783'
abstract:
- lang: eng
text: The development trend in manual assembly towards increasing demands in terms
of quality, variety, and cost pressure makes the transition for people with cognitive
disabilities to the general labor market extremely difficult. Nevertheless, this
employment sector is a central component of many activities in a sheltered workshop.
Therefore, this paper investigates the use of an informational assistance system
for persons with cognitive impairments to close the gap between the characteristics
of this group and the operational requirements. In this way, the transition from
the sheltered workshop to the general labor market will be facilitated and promoted.
author:
- first_name: Sven
full_name: Bendzioch, Sven
id: '71395'
last_name: Bendzioch
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
citation:
ama: Bendzioch S, Hinrichsen S. Informational Assistance System – a Key to Self-Empowerment
of Persons with Cognitive Disabilities in Manual Assembly? Vol 11. AHFE International;
2023:548-556. doi:10.54941/ahfe1004061
apa: 'Bendzioch, S., & Hinrichsen, S. (2023). Informational Assistance System
– a Key to Self-Empowerment of Persons with Cognitive Disabilities in Manual Assembly?
In Human Interaction & Emerging Technologies (IHIET 2023): Artificial Intelligence
& Future Applications (Vol. 11, pp. 548–556). AHFE International. https://doi.org/10.54941/ahfe1004061'
bjps: Bendzioch S and Hinrichsen S (2023) Informational Assistance System
– a Key to Self-Empowerment of Persons with Cognitive Disabilities in Manual Assembly?
AHFE International.
chicago: 'Bendzioch, Sven, and Sven Hinrichsen. Informational Assistance System
– a Key to Self-Empowerment of Persons with Cognitive Disabilities in Manual Assembly?
Human Interaction & Emerging Technologies (IHIET 2023): Artificial Intelligence
& Future Applications. Vol. 11. Human Interaction and Emerging Technologies
(IHIET 2023). AHFE International, 2023. https://doi.org/10.54941/ahfe1004061.'
chicago-de: 'Bendzioch, Sven und Sven Hinrichsen. 2023. Informational Assistance
System – a Key to Self-Empowerment of Persons with Cognitive Disabilities in Manual
Assembly? Human Interaction & Emerging Technologies (IHIET 2023): Artificial
Intelligence & Future Applications. Bd. 11. Human Interaction and Emerging
Technologies (IHIET 2023). AHFE International. doi:10.54941/ahfe1004061,
.'
din1505-2-1: 'Bendzioch, Sven ; Hinrichsen, Sven: Informational Assistance
System – a Key to Self-Empowerment of Persons with Cognitive Disabilities in Manual
Assembly?, Human Interaction and Emerging Technologies (IHIET 2023).
Bd. 11 : AHFE International, 2023'
havard: S. Bendzioch, S. Hinrichsen, Informational Assistance System – a Key to
Self-Empowerment of Persons with Cognitive Disabilities in Manual Assembly?, AHFE
International, 2023.
ieee: 'S. Bendzioch and S. Hinrichsen, Informational Assistance System – a Key
to Self-Empowerment of Persons with Cognitive Disabilities in Manual Assembly?,
vol. 11. AHFE International, 2023, pp. 548–556. doi: 10.54941/ahfe1004061.'
mla: 'Bendzioch, Sven, and Sven Hinrichsen. “Informational Assistance System – a
Key to Self-Empowerment of Persons with Cognitive Disabilities in Manual Assembly?”
Human Interaction & Emerging Technologies (IHIET 2023): Artificial Intelligence
& Future Applications, vol. 11, AHFE International, 2023, pp. 548–56,
https://doi.org/10.54941/ahfe1004061.'
short: S. Bendzioch, S. Hinrichsen, Informational Assistance System – a Key to Self-Empowerment
of Persons with Cognitive Disabilities in Manual Assembly?, AHFE International,
2023.
ufg: 'Bendzioch, Sven/Hinrichsen, Sven: Informational Assistance System –
a Key to Self-Empowerment of Persons with Cognitive Disabilities in Manual Assembly?,
Bd. 11, o. O. 2023 (Human Interaction and Emerging Technologies (IHIET 2023)).'
van: 'Bendzioch S, Hinrichsen S. Informational Assistance System – a Key to Self-Empowerment
of Persons with Cognitive Disabilities in Manual Assembly? Human Interaction &
Emerging Technologies (IHIET 2023): Artificial Intelligence & Future Applications.
AHFE International; 2023. (Human Interaction and Emerging Technologies (IHIET
2023); vol. 11).'
conference:
end_date: 2023-08-24
location: NIzza
name: IHIET 2023
start_date: 2023-08-22
date_created: 2023-11-16T12:05:40Z
date_updated: 2023-11-16T12:05:47Z
department:
- _id: DEP7020
- _id: DEP1305
doi: 10.54941/ahfe1004061
intvolume: ' 11'
keyword:
- Manual Assembly
- Informational Assistance System
- Image Processing System
- People with Disabilities
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 548-556
publication: 'Human Interaction & Emerging Technologies (IHIET 2023): Artificial Intelligence
& Future Applications'
publication_identifier:
issn:
- 2771-0718
publication_status: published
publisher: AHFE International
quality_controlled: '1'
series_title: Human Interaction and Emerging Technologies (IHIET 2023)
status: public
title: Informational Assistance System – a Key to Self-Empowerment of Persons with
Cognitive Disabilities in Manual Assembly?
type: conference_editor_article
user_id: '83780'
volume: 11
year: '2023'
...
---
_id: '7470'
abstract:
- lang: eng
text: The concepts of collective management of housing and urban spaces are being
revisited within the contemporary discussions about community-driven approaches
and practices and, in particular, related to the revitalization of residential
neighbourhoods. This research identifies the concepts of self-management and social
ownership of housing in the post-World War II period in Yugoslavia as an important
legacy of Yugoslav urban planning and housing policies. Although they were subsequently
neglected, these concepts can contribute to contemporary global discussions about
housing affordability and the role of community in ensuring spatial and social
equality. New Belgrade mass housing blocks—the main site for testing the new dwelling
concepts, in terms of both policies and modernist design—are the object of this
research. The article is mainly a theoretical analysis of the issues of common
interest and engagement, common good, and common spaces which played a decisive
role in its design. The study applies interpretative and correlational research
methods in re-theorizing these concepts and their underlying narratives. It traces
how the perspectives on the collective practices and spaces evolved over time,
revealing a correlation between changed social practices and the spatial deterioration
of the New Belgrade mass housing blocks. The study highlights the importance of
both collective practices and common spaces for addressing housing issues, emphasizing
their instrumentality, and potentiality for rearticulating the dialogue between
public and private, engaging citizens in interactive and inclusive decision-making
and co-creation of the urban reality.
author:
- first_name: Anica
full_name: Dragutinovic, Anica
id: '68875'
last_name: Dragutinovic
orcid: 0000-0002-6962-5223
- first_name: Uta
full_name: Pottgiesser, Uta
id: '27166'
last_name: Pottgiesser
orcid: 0000-0002-8594-3168
- first_name: Wido
full_name: Quist, Wido
last_name: Quist
citation:
ama: 'Dragutinovic A, Pottgiesser U, Quist W. Self-Management of Housing and Urban
Commons: New Belgrade and Reflections on Commons Today. Urban Planning.
2022;7(1):267-279. doi:10.17645/up.v7i1.4746'
apa: 'Dragutinovic, A., Pottgiesser, U., & Quist, W. (2022). Self-Management
of Housing and Urban Commons: New Belgrade and Reflections on Commons Today. Urban
Planning, 7(1), 267–279. https://doi.org/10.17645/up.v7i1.4746'
bjps: 'Dragutinovic A, Pottgiesser U and Quist W (2022) Self-Management of
Housing and Urban Commons: New Belgrade and Reflections on Commons Today. Urban
Planning 7, 267–279.'
chicago: 'Dragutinovic, Anica, Uta Pottgiesser, and Wido Quist. “Self-Management
of Housing and Urban Commons: New Belgrade and Reflections on Commons Today.”
Urban Planning 7, no. 1 (2022): 267–79. https://doi.org/10.17645/up.v7i1.4746.'
chicago-de: 'Dragutinovic, Anica, Uta Pottgiesser und Wido Quist. 2022. Self-Management
of Housing and Urban Commons: New Belgrade and Reflections on Commons Today. Urban
Planning 7, Nr. 1: 267–279. doi:10.17645/up.v7i1.4746,
.'
din1505-2-1: 'Dragutinovic, Anica
; Pottgiesser, Uta ; Quist,
Wido: Self-Management of Housing and Urban Commons: New Belgrade and Reflections
on Commons Today. In: Urban Planning Bd. 7. Lisbon, Cogitatio (2022),
Nr. 1, S. 267–279'
havard: 'A. Dragutinovic, U. Pottgiesser, W. Quist, Self-Management of Housing and
Urban Commons: New Belgrade and Reflections on Commons Today, Urban Planning.
7 (2022) 267–279.'
ieee: 'A. Dragutinovic, U. Pottgiesser, and W. Quist, “Self-Management of Housing
and Urban Commons: New Belgrade and Reflections on Commons Today,” Urban Planning,
vol. 7, no. 1, pp. 267–279, 2022, doi: 10.17645/up.v7i1.4746.'
mla: 'Dragutinovic, Anica, et al. “Self-Management of Housing and Urban Commons:
New Belgrade and Reflections on Commons Today.” Urban Planning, vol. 7,
no. 1, 2022, pp. 267–79, https://doi.org/10.17645/up.v7i1.4746.'
short: A. Dragutinovic, U. Pottgiesser, W. Quist, Urban Planning 7 (2022) 267–279.
ufg: 'Dragutinovic, Anica/Pottgiesser, Uta/Quist, Wido: Self-Management of
Housing and Urban Commons: New Belgrade and Reflections on Commons Today, in:
Urban Planning 7 (2022), H. 1, S. 267–279.'
van: 'Dragutinovic A, Pottgiesser U, Quist W. Self-Management of Housing and Urban
Commons: New Belgrade and Reflections on Commons Today. Urban Planning. 2022;7(1):267–79.'
date_created: 2022-04-08T13:11:47Z
date_updated: 2025-06-26T13:29:32Z
department:
- _id: DEP1000
- _id: DEP1055
doi: 10.17645/up.v7i1.4746
external_id:
isi:
- '000782643600007'
intvolume: ' 7'
isi: '1'
issue: '1'
keyword:
- common spaces
- community
- dwelling concepts
- New Belgrade
- post-war housing
- self-management
- urban commons
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.cogitatiopress.com/urbanplanning/article/view/4746
oa: '1'
page: 267-279
place: ' Lisbon'
publication: Urban Planning
publication_identifier:
eissn:
- 2183-7635
publication_status: published
publisher: Cogitatio
quality_controlled: '1'
status: public
title: 'Self-Management of Housing and Urban Commons: New Belgrade and Reflections
on Commons Today'
type: scientific_journal_article
user_id: '83781'
volume: 7
year: '2022'
...
---
_id: '8447'
author:
- first_name: Knut
full_name: Schwarzer, Knut
id: '13329'
last_name: Schwarzer
- first_name: Ulrich
full_name: Müller, Ulrich
id: '12119'
last_name: Müller
- first_name: Jan
full_name: Schneider, Jan
id: '13209'
last_name: Schneider
orcid: 0000-0001-6401-8873
citation:
ama: Schwarzer K, Müller U, Schneider J. Rethink Beer Pasteurization – Safety,
Sustainability and Quality.; 2022.
apa: Schwarzer, K., Müller, U., & Schneider, J. (2022). Rethink Beer Pasteurization
– Safety, Sustainability and Quality. 38th European Brewery Convention, Madrid.
bjps: Schwarzer K, Müller U and Schneider J (2022) Rethink Beer Pasteurization
– Safety, Sustainability and Quality. .
chicago: Schwarzer, Knut, Ulrich Müller, and Jan Schneider. Rethink Beer Pasteurization
– Safety, Sustainability and Quality, 2022.
chicago-de: Schwarzer, Knut, Ulrich Müller und Jan Schneider. 2022. Rethink Beer
Pasteurization – Safety, Sustainability and Quality.
din1505-2-1: 'Schwarzer, Knut ; Müller, Ulrich ; Schneider,
Jan: Rethink Beer Pasteurization – Safety, Sustainability and Quality,
2022'
havard: K. Schwarzer, U. Müller, J. Schneider, Rethink Beer Pasteurization – Safety,
Sustainability and Quality, 2022.
ieee: K. Schwarzer, U. Müller, and J. Schneider, Rethink Beer Pasteurization
– Safety, Sustainability and Quality. 2022.
mla: Schwarzer, Knut, et al. Rethink Beer Pasteurization – Safety, Sustainability
and Quality. 2022.
short: K. Schwarzer, U. Müller, J. Schneider, Rethink Beer Pasteurization – Safety,
Sustainability and Quality, 2022.
ufg: 'Schwarzer, Knut/Müller, Ulrich/Schneider, Jan: Rethink Beer Pasteurization
– Safety, Sustainability and Quality, o. O. 2022.'
van: Schwarzer K, Müller U, Schneider J. Rethink Beer Pasteurization – Safety, Sustainability
and Quality. 2022.
conference:
end_date: 2022-06-01
location: Madrid
name: 38th European Brewery Convention
start_date: 2022-05-29
date_created: 2022-07-12T10:28:12Z
date_updated: 2025-01-30T15:42:30Z
ddc:
- '570'
department:
- _id: DEP4009
- _id: DEP4018
- _id: DEP1308
- _id: DEP4028
file:
- access_level: closed
content_type: application/pdf
creator: kschwarz
date_created: 2022-07-12T10:23:37Z
date_updated: 2024-08-06T08:54:06Z
file_id: '8449'
file_name: 2022_05_29_EBC_KSc.pdf
file_size: 568074
relation: main_file
file_date_updated: 2024-08-06T08:54:06Z
has_accepted_license: '1'
keyword:
- Pasteurization
- minimal processing
language:
- iso: eng
publication_status: published
status: public
title: Rethink Beer Pasteurization – Safety, Sustainability and Quality
type: conference_poster
user_id: '83781'
year: '2022'
...
---
_id: '9193'
abstract:
- lang: eng
text: 'The paper studies local community centres (Serbian: centar mesne zajednice
– CMZ) of post–war mass housing neighbourhoods in New Belgrade. Those were designed
and built in 1970s as multifunctional centres with facilities and programmes complementary
to the housing blocks: socio–cultural, commercial (grocery stores), daily services
(post office, bank, crafts, etc.) spaces for socio–political activities and office
spaces for the local community. The local community centres significantly increased
quality of life of the residents, liveability and socialisation in the neighbourhoods.
Furthermore, one of the main aims of these spaces was to enable actual realisation
of the self–management in local communities. This paper reflects on the ideological
and theoretical basis for their conceptualisation, referring to Edvard Kardelj,
one of the main ideologues of self–management and originator of the local community
concept in Yugoslavia. Moreover, the paper investigates: how the local community
centres were planned, designed and programmed, and how they were spatially integrated
in the existing residential blocks; how their organisational and governing role
has been neglected over time, and their main purpose altered; and what are potentials
and socio–spatial capacities for their future reuse. Reaffirmation of local community
centres as utilitarian, governing and social space is recognized as key for promoting
participation and collaborative governance in New Belgrade blocks, as well as
for improving social connections, solidarity and sense of belonging in these neighbourhoods.
As such, the local community centres could be one of the main factors of revitalisation
of the blocks, increasing vitality and improving quality of life of the residents.
Furthermore, the local community centres could have a major role in unlocking
the potential of institutions and individuals towards new effective urban governance
structures, as well as institutionalising citizens{\textquoteright} participation
and bottom-up governance as direct democracy in the city today.'
author:
- first_name: Anica
full_name: Dragutinovic, Anica
id: '68875'
last_name: Dragutinovic
orcid: 0000-0002-6962-5223
- first_name: Uta
full_name: Pottgiesser, Uta
id: '27166'
last_name: Pottgiesser
orcid: 0000-0002-8594-3168
- first_name: Wido
full_name: Quist, Wido
last_name: Quist
citation:
ama: 'Dragutinovic A, Pottgiesser U, Quist W. Local Community Centre as Utilitarian,
Governing and Social Space: The Case of New Belgrade CMZ. In: Jordá Such C, Palomares
Figueres M, Tostões A, Pottgiesser U, eds. Modern Design. Social Commitment
and Quality of Life. Docomomo International, tirant lo blanch; 2022:329-337.'
apa: 'Dragutinovic, A., Pottgiesser, U., & Quist, W. (2022). Local Community
Centre as Utilitarian, Governing and Social Space: The Case of New Belgrade CMZ.
In C. Jordá Such, M. Palomares Figueres, A. Tostões, & U. Pottgiesser (Eds.),
Modern Design. Social Commitment and Quality of Life (pp. 329–337). Docomomo
International, tirant lo blanch.'
bjps: 'Dragutinovic A, Pottgiesser U and Quist W (2022) Local Community Centre
as Utilitarian, Governing and Social Space: The Case of New Belgrade CMZ. In Jordá
Such C et al. (eds), Modern Design. Social Commitment and Quality of Life.
Docomomo International, tirant lo blanch, pp. 329–337.'
chicago: 'Dragutinovic, Anica, Uta Pottgiesser, and Wido Quist. “Local Community
Centre as Utilitarian, Governing and Social Space: The Case of New Belgrade CMZ.”
In Modern Design. Social Commitment and Quality of Life, edited by Carmen
Jordá Such, Maite Palomares Figueres, Ana Tostões, and Uta Pottgiesser, 329–37.
Docomomo International, tirant lo blanch, 2022.'
chicago-de: 'Dragutinovic, Anica, Uta Pottgiesser und Wido Quist. 2022. Local Community
Centre as Utilitarian, Governing and Social Space: The Case of New Belgrade CMZ.
In: Modern Design. Social Commitment and Quality of Life, hg. von Carmen
Jordá Such, Maite Palomares Figueres, Ana Tostões, und Uta Pottgiesser, 329–337.
Docomomo International, tirant lo blanch.'
din1505-2-1: 'Dragutinovic, Anica
; Pottgiesser, Uta ; Quist,
Wido: Local Community Centre as Utilitarian, Governing and Social Space:
The Case of New Belgrade CMZ. In: Jordá
Such, C. ; Palomares Figueres, M.
; Tostões, A. ; Pottgiesser,
U. (Hrsg.): Modern Design. Social Commitment and Quality of Life :
Docomomo International, tirant lo blanch, 2022, S. 329–337'
havard: 'A. Dragutinovic, U. Pottgiesser, W. Quist, Local Community Centre as Utilitarian,
Governing and Social Space: The Case of New Belgrade CMZ, in: C. Jordá Such, M.
Palomares Figueres, A. Tostões, U. Pottgiesser (Eds.), Modern Design. Social Commitment
and Quality of Life, Docomomo International, tirant lo blanch, 2022: pp. 329–337.'
ieee: 'A. Dragutinovic, U. Pottgiesser, and W. Quist, “Local Community Centre as
Utilitarian, Governing and Social Space: The Case of New Belgrade CMZ,” in Modern
Design. Social Commitment and Quality of Life, Valencia, Spain, 2022, pp.
329–337.'
mla: 'Dragutinovic, Anica, et al. “Local Community Centre as Utilitarian, Governing
and Social Space: The Case of New Belgrade CMZ.” Modern Design. Social Commitment
and Quality of Life, edited by Carmen Jordá Such et al., Docomomo International,
tirant lo blanch, 2022, pp. 329–37.'
short: 'A. Dragutinovic, U. Pottgiesser, W. Quist, in: C. Jordá Such, M. Palomares
Figueres, A. Tostões, U. Pottgiesser (Eds.), Modern Design. Social Commitment
and Quality of Life, Docomomo International, tirant lo blanch, 2022, pp. 329–337.'
ufg: 'Dragutinovic, Anica/Pottgiesser, Uta/Quist, Wido: Local Community Centre
as Utilitarian, Governing and Social Space: The Case of New Belgrade CMZ, in:
Jordá Such, Carmen u. a. (Hgg.): Modern Design. Social Commitment and Quality
of Life, o. O. 2022, S. 329–337.'
van: 'Dragutinovic A, Pottgiesser U, Quist W. Local Community Centre as Utilitarian,
Governing and Social Space: The Case of New Belgrade CMZ. In: Jordá Such C, Palomares
Figueres M, Tostões A, Pottgiesser U, editors. Modern Design Social Commitment
and Quality of Life. Docomomo International, tirant lo blanch; 2022. p. 329–37.'
conference:
end_date: 2022-09-09
location: Valencia, Spain
name: 17th International Docomomo Conference
start_date: 2022-09-06
date_created: 2022-12-04T10:15:51Z
date_updated: 2025-01-21T14:09:30Z
department:
- _id: DEP1000
- _id: DEP1055
editor:
- first_name: Carmen
full_name: Jordá Such, Carmen
last_name: Jordá Such
- first_name: Maite
full_name: Palomares Figueres, Maite
last_name: Palomares Figueres
- first_name: Ana
full_name: Tostões, Ana
last_name: Tostões
- first_name: Uta
full_name: Pottgiesser, Uta
id: '27166'
last_name: Pottgiesser
orcid: 0000-0002-8594-3168
keyword:
- local community centre
- neighbourhood
- post-war housing
- neighbourhood histories
- local communities
- New Belgrade
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://docomomo.com/wp-content/uploads/2023/01/014850_ebook.pdf
oa: '1'
page: 329-337
publication: Modern Design. Social Commitment and Quality of Life
publication_identifier:
isbn:
- 978-84-19286-59-8
publication_status: published
publisher: Docomomo International, tirant lo blanch
quality_controlled: '1'
status: public
title: 'Local Community Centre as Utilitarian, Governing and Social Space: The Case
of New Belgrade CMZ'
type: conference
user_id: '83781'
year: '2022'
...
---
_id: '9420'
abstract:
- lang: eng
text: Larger processing equipment to produce minced meat could affect its structure
due to intensive processing and a high energy intake in the meat mass. To assess
if this would result in alterations in the minced meat quality, finely chopped
meat (FCM) was added in different concentrations (15, 30, 45, 60, 75, 90, and
100%) to minced meat and quality parameters were analyzed. FCM was used to simulate
different intensity of an unintended destruction of meat cells due to various
processes. The amount of non-intact cells (ANIC) was determined histologically
and furthermore, soluble protein content, water holding capacity, mechanical and
sensory texture, and scanning electron and confocal laser scanning microscopy
was applied to analyze the meat structure and quality. ANIC indicated that even
adding 15% FCM was statistically (p < 0.05) distinguishable from 100% minced meat
and 30% FCM had already 50 Vol.-% ANIC. In contrast, the addition of 15% or 30%
FCM did not result in significant differences in drip loss of raw and cooked meat
as well as mechanical and sensory texture analysis. This study showed that intensive
processing might be detectable via ANIC, but that the minced meat quality was
not affected.
article_number: '10590'
author:
- first_name: 'Franziska '
full_name: 'Witte , Franziska '
last_name: 'Witte '
- first_name: 'Erik '
full_name: 'Sawas , Erik '
last_name: 'Sawas '
- first_name: Lisa M.
full_name: Berger , Lisa M.
last_name: 'Berger '
- first_name: 'Monika '
full_name: 'Gibis , Monika '
last_name: 'Gibis '
- first_name: 'Jochen '
full_name: 'Weiss, Jochen '
last_name: Weiss
- first_name: Anja
full_name: Röser, Anja
id: '12158'
last_name: Röser
- first_name: Matthias
full_name: Upmann, Matthias
id: '12666'
last_name: Upmann
- first_name: 'Eike '
full_name: 'Joeres, Eike '
last_name: Joeres
- first_name: 'Andreas '
full_name: 'Juadjur , Andreas '
last_name: 'Juadjur '
- first_name: 'Ute '
full_name: 'Bindrich , Ute '
last_name: 'Bindrich '
- first_name: 'Volker '
full_name: 'Heinz , Volker '
last_name: 'Heinz '
- first_name: Nino
full_name: Terjung, Nino
id: '79388'
last_name: Terjung
citation:
ama: Witte F, Sawas E, Berger LM, et al. Influence of Finely Chopped Meat Addition
on Quality Parameters of Minced Meat. Applied Sciences. 2022;20(12). doi:https://doi.org/10.3390/app122010590
apa: Witte , F., Sawas , E., Berger , L. M., Gibis , M., Weiss, J., Röser, A., Upmann,
M., Joeres, E., Juadjur , A., Bindrich , U., Heinz , V., & Terjung, N. (2022).
Influence of Finely Chopped Meat Addition on Quality Parameters of Minced Meat.
Applied Sciences, 20(12), Article 10590. https://doi.org/10.3390/app122010590
bjps: Witte F et al. (2022) Influence of Finely Chopped Meat Addition
on Quality Parameters of Minced Meat. Applied Sciences 20.
chicago: Witte , Franziska , Erik Sawas , Lisa M. Berger , Monika Gibis , Jochen Weiss,
Anja Röser, Matthias Upmann, et al. “Influence of Finely Chopped Meat Addition
on Quality Parameters of Minced Meat.” Applied Sciences 20, no. 12 (2022).
https://doi.org/10.3390/app122010590.
chicago-de: Witte , Franziska , Erik Sawas , Lisa M. Berger , Monika Gibis , Jochen Weiss,
Anja Röser, Matthias Upmann, u. a. 2022. Influence of Finely Chopped Meat Addition
on Quality Parameters of Minced Meat. Applied Sciences 20, Nr. 12. doi:https://doi.org/10.3390/app122010590,
.
din1505-2-1: 'Witte
, Franziska ; Sawas , Erik
; Berger , Lisa M. ; Gibis
, Monika ; Weiss, Jochen
; Röser, Anja ; Upmann,
Matthias ; Joeres, Eike
; u. a.: Influence of Finely Chopped Meat Addition on Quality Parameters
of Minced Meat. In: Applied Sciences Bd. 20. Basel (CH), MDPI (2022), Nr. 12'
havard: F. Witte , E. Sawas , L.M. Berger , M. Gibis , J. Weiss, A. Röser, M. Upmann,
E. Joeres, A. Juadjur , U. Bindrich , V. Heinz , N. Terjung, Influence of Finely
Chopped Meat Addition on Quality Parameters of Minced Meat, Applied Sciences.
20 (2022).
ieee: 'F. Witte et al., “Influence of Finely Chopped Meat Addition on Quality
Parameters of Minced Meat,” Applied Sciences, vol. 20, no. 12, Art. no.
10590, 2022, doi: https://doi.org/10.3390/app122010590.'
mla: Witte , Franziska, et al. “Influence of Finely Chopped Meat Addition on Quality
Parameters of Minced Meat.” Applied Sciences, vol. 20, no. 12, 10590, 2022,
https://doi.org/10.3390/app122010590.
short: F. Witte , E. Sawas , L.M. Berger , M. Gibis , J. Weiss, A. Röser, M. Upmann,
E. Joeres, A. Juadjur , U. Bindrich , V. Heinz , N. Terjung, Applied Sciences
20 (2022).
ufg: 'Witte , Franziska u. a.: Influence of Finely Chopped Meat Addition
on Quality Parameters of Minced Meat, in: Applied Sciences 20 (2022), H.
12.'
van: Witte F, Sawas E, Berger LM, Gibis M, Weiss J, Röser A, et al. Influence
of Finely Chopped Meat Addition on Quality Parameters of Minced Meat. Applied
Sciences. 2022;20(12).
date_created: 2023-02-05T11:07:26Z
date_updated: 2024-08-06T11:57:47Z
department:
- _id: DEP4013
doi: https://doi.org/10.3390/app122010590
intvolume: ' 20'
issue: '12'
keyword:
- minced pork
- industrial meat processing
- quality characterization
- techno-functional properties of minced pork
- structural modification
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.mdpi.com/2076-3417/12/20/10590
oa: '1'
place: Basel (CH)
publication: Applied Sciences
publication_identifier:
eissn:
- '2076-3417 '
publication_status: published
publisher: MDPI
quality_controlled: '1'
status: public
title: Influence of Finely Chopped Meat Addition on Quality Parameters of Minced Meat
type: scientific_journal_article
user_id: '83781'
volume: 20
year: '2022'
...
---
_id: '12948'
abstract:
- lang: eng
text: Diet processing impacts on starch properties, such as the degree of starch
gelatinization. This affects digestibility, as shown in laboratory mice fed either
a pelleted or an extruded diet. In the present study, the morphology of starch
particles throughout the digestive tract of mice was visualized. Thirty-two female
C57BL/6J mice were used for a feeding trial. They were fed a commercial maintenance
diet for laboratory mice, which was available in pelleted and extruded form, for
seven weeks. The mice were sacrificed after the feeding period, and chyme samples
were collected from five sites (stomach, anterior and posterior small intestine,
caecum, colon). Samples of diets, chyme and faeces were analyzed via stereomicroscopy
(stained with Lugol’s iodine) and scanning electron microscopy (SEM). The starch
granules appeared more compact in the pelleted diet, showing first signs of degradation
only in the small intestine. The caecum content of both diets group was intensively
stained, particles as well as fluid phase, indicating that it contained mainly
starch. The SEM pictures of caecum content showed abundant bacteria near starch
particles. This suggests selective retention of prae-caecally undigested starch
in the murine caecum, likely the site of microbial fermentation.
article_number: '952'
author:
- first_name: Jasmin
full_name: Wenderlein, Jasmin
last_name: Wenderlein
- first_name: Ellen
full_name: Kienzle, Ellen
last_name: Kienzle
- first_name: Reinhard K.
full_name: Straubinger, Reinhard K.
last_name: Straubinger
- first_name: Heidrun
full_name: Schöl, Heidrun
last_name: Schöl
- first_name: Sebastian
full_name: Ulrich, Sebastian
id: '85847'
last_name: Ulrich
orcid: 0000-0002-4511-9537
- first_name: Linda Franziska
full_name: Böswald, Linda Franziska
last_name: Böswald
citation:
ama: Wenderlein J, Kienzle E, Straubinger RK, Schöl H, Ulrich S, Böswald LF. Morphology
of Starch Particles along the Passage through the Gastrointestinal Tract in Laboratory
Mice Fed Extruded and Pelleted Diets. Animals. 2022;12(8). doi:10.3390/ani12080952
apa: Wenderlein, J., Kienzle, E., Straubinger, R. K., Schöl, H., Ulrich, S., &
Böswald, L. F. (2022). Morphology of Starch Particles along the Passage through
the Gastrointestinal Tract in Laboratory Mice Fed Extruded and Pelleted Diets.
Animals, 12(8), Article 952. https://doi.org/10.3390/ani12080952
bjps: Wenderlein J et al. (2022) Morphology of Starch Particles along
the Passage through the Gastrointestinal Tract in Laboratory Mice Fed Extruded
and Pelleted Diets. Animals 12.
chicago: Wenderlein, Jasmin, Ellen Kienzle, Reinhard K. Straubinger, Heidrun Schöl,
Sebastian Ulrich, and Linda Franziska Böswald. “Morphology of Starch Particles
along the Passage through the Gastrointestinal Tract in Laboratory Mice Fed Extruded
and Pelleted Diets.” Animals 12, no. 8 (2022). https://doi.org/10.3390/ani12080952.
chicago-de: Wenderlein, Jasmin, Ellen Kienzle, Reinhard K. Straubinger, Heidrun
Schöl, Sebastian Ulrich und Linda Franziska Böswald. 2022. Morphology of Starch
Particles along the Passage through the Gastrointestinal Tract in Laboratory Mice
Fed Extruded and Pelleted Diets. Animals 12, Nr. 8. doi:10.3390/ani12080952,
.
din1505-2-1: 'Wenderlein, Jasmin ;
Kienzle, Ellen ; Straubinger,
Reinhard K. ; Schöl, Heidrun
; Ulrich, Sebastian ; Böswald,
Linda Franziska: Morphology of Starch Particles along the Passage through
the Gastrointestinal Tract in Laboratory Mice Fed Extruded and Pelleted Diets.
In: Animals Bd. 12. Basel, MDPI AG (2022), Nr. 8'
havard: J. Wenderlein, E. Kienzle, R.K. Straubinger, H. Schöl, S. Ulrich, L.F. Böswald,
Morphology of Starch Particles along the Passage through the Gastrointestinal
Tract in Laboratory Mice Fed Extruded and Pelleted Diets, Animals. 12 (2022).
ieee: 'J. Wenderlein, E. Kienzle, R. K. Straubinger, H. Schöl, S. Ulrich, and L.
F. Böswald, “Morphology of Starch Particles along the Passage through the Gastrointestinal
Tract in Laboratory Mice Fed Extruded and Pelleted Diets,” Animals, vol.
12, no. 8, Art. no. 952, 2022, doi: 10.3390/ani12080952.'
mla: Wenderlein, Jasmin, et al. “Morphology of Starch Particles along the Passage
through the Gastrointestinal Tract in Laboratory Mice Fed Extruded and Pelleted
Diets.” Animals, vol. 12, no. 8, 952, 2022, https://doi.org/10.3390/ani12080952.
short: J. Wenderlein, E. Kienzle, R.K. Straubinger, H. Schöl, S. Ulrich, L.F. Böswald,
Animals 12 (2022).
ufg: 'Wenderlein, Jasmin u. a.: Morphology of Starch Particles along the
Passage through the Gastrointestinal Tract in Laboratory Mice Fed Extruded and
Pelleted Diets, in: Animals 12 (2022), H. 8.'
van: Wenderlein J, Kienzle E, Straubinger RK, Schöl H, Ulrich S, Böswald LF. Morphology
of Starch Particles along the Passage through the Gastrointestinal Tract in Laboratory
Mice Fed Extruded and Pelleted Diets. Animals. 2022;12(8).
date_created: 2025-06-15T09:57:56Z
date_updated: 2025-06-16T12:01:46Z
department:
- _id: DEP4010
doi: 10.3390/ani12080952
extern: '1'
intvolume: ' 12'
issue: '8'
keyword:
- amylase
- carbohydrate metabolism
- processing
- laboratory animal diets
- caecum fermentation
language:
- iso: eng
place: Basel
publication: Animals
publication_identifier:
eissn:
- 2076-2615
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: Morphology of Starch Particles along the Passage through the Gastrointestinal
Tract in Laboratory Mice Fed Extruded and Pelleted Diets
type: scientific_journal_article
user_id: '83781'
volume: 12
year: '2022'
...
---
_id: '7981'
abstract:
- lang: eng
text: 'The main purpose of bovine colostrum, being the milk secreted by a cow after
giving birth, is to transfer passive immunity to the calf. The calves have an
immature immune system as they lack immunoglobulins (Igs). Subsequently, the supply
of good quality bovine colostrum is required. The quality of colostrum is classified
by low bacterial counts and adequate Ig concentrations. Bacterial contamination
can contain a variety of human pathogens or high counts of spoilage bacteria,
which has become more challenging with the emerging use of bovine colostrum as
food and food supplements. There is also a growing risk for the spread of zoonotic
diseases originating from bovines. For this reason, processing based on heat treatment
or other feasible techniques is required. This review provides an overview of
literature on the microbial quality of bovine colostrum and processing methods
to improve its microbial quality and keep its nutritional values as food. The
highlights of this review are as follows: high quality colostrum is a valuable
raw material in food products and supplements; the microbial safety of bovine
colostrum is increased using an appropriate processing-suitable effective heat
treatment which does not destroy the high nutrition value of colostrum; the heat
treatment processes are cost-effective compared to other methods; and heat treatment
can be performed in both small- and large-scale production.'
author:
- first_name: Sylvia
full_name: Fasse, Sylvia
last_name: Fasse
- first_name: Jarmo
full_name: Alarinta, Jarmo
last_name: Alarinta
- first_name: Björn
full_name: Frahm, Björn
id: '45666'
last_name: Frahm
- first_name: Gun
full_name: Wirtanen, Gun
last_name: Wirtanen
citation:
ama: Fasse S, Alarinta J, Frahm B, Wirtanen G. Bovine Colostrum for Human Consumption
- Improving Microbial Quality and Maintaining Bioactive Characteristics through
Processing. Dairy. 2021;2(4):556-575. doi:10.3390/dairy2040044
apa: Fasse, S., Alarinta, J., Frahm, B., & Wirtanen, G. (2021). Bovine Colostrum
for Human Consumption - Improving Microbial Quality and Maintaining Bioactive
Characteristics through Processing. Dairy, 2(4), 556–575. https://doi.org/10.3390/dairy2040044
bjps: Fasse S et al. (2021) Bovine Colostrum for Human Consumption
- Improving Microbial Quality and Maintaining Bioactive Characteristics through
Processing. Dairy 2, 556–575.
chicago: 'Fasse, Sylvia, Jarmo Alarinta, Björn Frahm, and Gun Wirtanen. “Bovine
Colostrum for Human Consumption - Improving Microbial Quality and Maintaining
Bioactive Characteristics through Processing.” Dairy 2, no. 4 (2021): 556–75.
https://doi.org/10.3390/dairy2040044.'
chicago-de: 'Fasse, Sylvia, Jarmo Alarinta, Björn Frahm und Gun Wirtanen. 2021.
Bovine Colostrum for Human Consumption - Improving Microbial Quality and Maintaining
Bioactive Characteristics through Processing. Dairy 2, Nr. 4: 556–575.
doi:10.3390/dairy2040044, .'
din1505-2-1: 'Fasse, Sylvia ; Alarinta, Jarmo ; Frahm,
Björn ; Wirtanen, Gun: Bovine
Colostrum for Human Consumption - Improving Microbial Quality and Maintaining
Bioactive Characteristics through Processing. In: Dairy Bd. 2. Basel, MDPI
(2021), Nr. 4, S. 556–575'
havard: S. Fasse, J. Alarinta, B. Frahm, G. Wirtanen, Bovine Colostrum for Human
Consumption - Improving Microbial Quality and Maintaining Bioactive Characteristics
through Processing, Dairy. 2 (2021) 556–575.
ieee: 'S. Fasse, J. Alarinta, B. Frahm, and G. Wirtanen, “Bovine Colostrum for Human
Consumption - Improving Microbial Quality and Maintaining Bioactive Characteristics
through Processing,” Dairy, vol. 2, no. 4, pp. 556–575, 2021, doi: 10.3390/dairy2040044.'
mla: Fasse, Sylvia, et al. “Bovine Colostrum for Human Consumption - Improving Microbial
Quality and Maintaining Bioactive Characteristics through Processing.” Dairy,
vol. 2, no. 4, 2021, pp. 556–75, https://doi.org/10.3390/dairy2040044.
short: S. Fasse, J. Alarinta, B. Frahm, G. Wirtanen, Dairy 2 (2021) 556–575.
ufg: 'Fasse, Sylvia u. a.: Bovine Colostrum for Human Consumption - Improving
Microbial Quality and Maintaining Bioactive Characteristics through Processing,
in: Dairy 2 (2021), H. 4, S. 556–575.'
van: Fasse S, Alarinta J, Frahm B, Wirtanen G. Bovine Colostrum for Human Consumption
- Improving Microbial Quality and Maintaining Bioactive Characteristics through
Processing. Dairy. 2021;2(4):556–75.
date_created: 2022-05-05T12:51:45Z
date_updated: 2025-06-26T08:58:30Z
department:
- _id: DEP4021
doi: 10.3390/dairy2040044
external_id:
isi:
- '001178458700001'
intvolume: ' 2'
isi: '1'
issue: '4'
keyword:
- bovine colostrum
- bacteria
- pathogens
- probiotic bacteria
- cost-effective processing
- heat treatment
- pasteurization
- contamination control
- immunoglobulins
- enzymes
language:
- iso: eng
page: 556-575
place: Basel
publication: Dairy
publication_identifier:
eissn:
- '2624-862X '
publication_status: published
publisher: MDPI
quality_controlled: '1'
status: public
title: Bovine Colostrum for Human Consumption - Improving Microbial Quality and Maintaining
Bioactive Characteristics through Processing
type: scientific_journal_article
user_id: '83781'
volume: 2
year: '2021'
...
---
_id: '12950'
abstract:
- lang: eng
text: The composition of the microbiome is subject to the host’s diet. In commercial
laboratory mouse diets, different physical forms of the same diets are available,
containing—according to their labels—identical ingredients and nutrient compositions.
However, variations in nutrient composition and starch gelatinization due to production
processes and their impact on digestibility have been described. In this study,
a total of 48 C57BL/J6 mice were assigned to two equal groups and were fed diets
(produced with different processes—extruded vs. pelleted) for eight weeks in two
biological replicates. At the end of the experiment, samples were collected from
five different gastrointestinal regions, including the stomach, small intestine,
cecum, large intestine, and an extracorporeal region (feces), and the microbiome
was analyzed with 16S rRNA gene amplicon sequencing. The replicates in both experiments
differed significantly in their relative abundances of Muribaculaceae species.
Furthermore, the gastrointestinal content of pellet-fed mice contained larger
numbers of Lactobacillus species. These results indicate that starch gelatinization
and ingredient composition significantly influence microbial makeup. In conclusion,
different feed processing methods may affect fundamental digestive and metabolic
processes, impacting animal experiments and biasing microbiome data.
article_number: '862'
author:
- first_name: Jasmin
full_name: Wenderlein, Jasmin
last_name: Wenderlein
- first_name: Linda F.
full_name: Böswald, Linda F.
last_name: Böswald
- first_name: Sebastian
full_name: Ulrich, Sebastian
id: '85847'
last_name: Ulrich
orcid: 0000-0002-4511-9537
- first_name: Ellen
full_name: Kienzle, Ellen
last_name: Kienzle
- first_name: Klaus
full_name: Neuhaus, Klaus
last_name: Neuhaus
- first_name: Ilias
full_name: Lagkouvardos, Ilias
last_name: Lagkouvardos
- first_name: Christian
full_name: Zenner, Christian
last_name: Zenner
- first_name: Reinhard K.
full_name: Straubinger, Reinhard K.
last_name: Straubinger
citation:
ama: Wenderlein J, Böswald LF, Ulrich S, et al. Processing Matters in Nutrient-Matched
Laboratory Diets for Mice—Microbiome. Animals. 2021;11(3). doi:10.3390/ani11030862
apa: Wenderlein, J., Böswald, L. F., Ulrich, S., Kienzle, E., Neuhaus, K., Lagkouvardos,
I., Zenner, C., & Straubinger, R. K. (2021). Processing Matters in Nutrient-Matched
Laboratory Diets for Mice—Microbiome. Animals, 11(3), Article 862.
https://doi.org/10.3390/ani11030862
bjps: Wenderlein J et al. (2021) Processing Matters in Nutrient-Matched
Laboratory Diets for Mice—Microbiome. Animals 11.
chicago: Wenderlein, Jasmin, Linda F. Böswald, Sebastian Ulrich, Ellen Kienzle,
Klaus Neuhaus, Ilias Lagkouvardos, Christian Zenner, and Reinhard K. Straubinger.
“Processing Matters in Nutrient-Matched Laboratory Diets for Mice—Microbiome.”
Animals 11, no. 3 (2021). https://doi.org/10.3390/ani11030862.
chicago-de: Wenderlein, Jasmin, Linda F. Böswald, Sebastian Ulrich, Ellen Kienzle,
Klaus Neuhaus, Ilias Lagkouvardos, Christian Zenner und Reinhard K. Straubinger.
2021. Processing Matters in Nutrient-Matched Laboratory Diets for Mice—Microbiome.
Animals 11, Nr. 3. doi:10.3390/ani11030862,
.
din1505-2-1: 'Wenderlein, Jasmin ;
Böswald, Linda F. ; Ulrich,
Sebastian ; Kienzle, Ellen
; Neuhaus, Klaus ; Lagkouvardos,
Ilias ; Zenner, Christian
; Straubinger, Reinhard K.: Processing
Matters in Nutrient-Matched Laboratory Diets for Mice—Microbiome. In: Animals
Bd. 11. Basel, MDPI AG (2021), Nr. 3'
havard: J. Wenderlein, L.F. Böswald, S. Ulrich, E. Kienzle, K. Neuhaus, I. Lagkouvardos,
C. Zenner, R.K. Straubinger, Processing Matters in Nutrient-Matched Laboratory
Diets for Mice—Microbiome, Animals. 11 (2021).
ieee: 'J. Wenderlein et al., “Processing Matters in Nutrient-Matched Laboratory
Diets for Mice—Microbiome,” Animals, vol. 11, no. 3, Art. no. 862, 2021,
doi: 10.3390/ani11030862.'
mla: Wenderlein, Jasmin, et al. “Processing Matters in Nutrient-Matched Laboratory
Diets for Mice—Microbiome.” Animals, vol. 11, no. 3, 862, 2021, https://doi.org/10.3390/ani11030862.
short: J. Wenderlein, L.F. Böswald, S. Ulrich, E. Kienzle, K. Neuhaus, I. Lagkouvardos,
C. Zenner, R.K. Straubinger, Animals 11 (2021).
ufg: 'Wenderlein, Jasmin u. a.: Processing Matters in Nutrient-Matched Laboratory
Diets for Mice—Microbiome, in: Animals 11 (2021), H. 3.'
van: Wenderlein J, Böswald LF, Ulrich S, Kienzle E, Neuhaus K, Lagkouvardos I, et
al. Processing Matters in Nutrient-Matched Laboratory Diets for Mice—Microbiome.
Animals. 2021;11(3).
date_created: 2025-06-15T09:58:59Z
date_updated: 2025-06-16T12:07:21Z
department:
- _id: DEP4010
doi: 10.3390/ani11030862
extern: '1'
intvolume: ' 11'
issue: '3'
keyword:
- feed processing
- starch gelatinization
- laboratory mouse
- diet
- intestinal microbiome
language:
- iso: eng
place: Basel
publication: Animals
publication_identifier:
issn:
- 2076-2615
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: Processing Matters in Nutrient-Matched Laboratory Diets for Mice—Microbiome
type: scientific_journal_article
user_id: '83781'
volume: 11
year: '2021'
...
---
_id: '12953'
abstract:
- lang: eng
text: Starch gelatinization is a major determinant of carbohydrate digestibility
and varies with diet processing. Laboratory rodent diets are often marketed as
identical, but are sold in different forms, regardless of the markedly higher
starch gelatinization in extruded than in pelleted diets. Our hypothesis was that
this would impact energy and nutrient digestibility in mice fed pellets or extrudate,
respectively. Trial 1 showed that feeding C57BL/6 mice a standard maintenance
diet in extruded form results in a significantly higher digestibility of organic
matter, energy, and carbohydrates than the identical diet in pelleted form. The
replication of the experiment, however, revealed a variation between batches of
the same pelleted diet regarding starch and total dietary fiber contents. Given
the significant differences in diet digestibility and the potential impacts of
digestibility on nutrient utilization, the intestinal microbiome, and intermediary
metabolism, trials performed with differently processed diets are not comparable.
This might partly explain failures to reproduce results, especially in gastrointestinal
or microbiome research. Considering this impact on experimental animals, the degree
of starch gelatinization should be declared in the diet information for laboratory
animal diets. The differences between batches of laboratory animal diets as observed
in the pellets are not acceptable.
article_number: '523'
author:
- first_name: Linda F.
full_name: Böswald, Linda F.
last_name: Böswald
- first_name: Jasmin
full_name: Wenderlein, Jasmin
last_name: Wenderlein
- first_name: Reinhard K.
full_name: Straubinger, Reinhard K.
last_name: Straubinger
- first_name: Sebastian
full_name: Ulrich, Sebastian
id: '85847'
last_name: Ulrich
orcid: 0000-0002-4511-9537
- first_name: Ellen
full_name: Kienzle, Ellen
last_name: Kienzle
citation:
ama: Böswald LF, Wenderlein J, Straubinger RK, Ulrich S, Kienzle E. Processing Matters
in Nutrient-Matched Laboratory Diets for Mice—Energy and Nutrient Digestibility.
Animals. 2021;11(2). doi:10.3390/ani11020523
apa: Böswald, L. F., Wenderlein, J., Straubinger, R. K., Ulrich, S., & Kienzle,
E. (2021). Processing Matters in Nutrient-Matched Laboratory Diets for Mice—Energy
and Nutrient Digestibility. Animals, 11(2), Article 523. https://doi.org/10.3390/ani11020523
bjps: Böswald LF et al. (2021) Processing Matters in Nutrient-Matched
Laboratory Diets for Mice—Energy and Nutrient Digestibility. Animals 11.
chicago: Böswald, Linda F., Jasmin Wenderlein, Reinhard K. Straubinger, Sebastian
Ulrich, and Ellen Kienzle. “Processing Matters in Nutrient-Matched Laboratory
Diets for Mice—Energy and Nutrient Digestibility.” Animals 11, no. 2 (2021).
https://doi.org/10.3390/ani11020523.
chicago-de: Böswald, Linda F., Jasmin Wenderlein, Reinhard K. Straubinger, Sebastian
Ulrich und Ellen Kienzle. 2021. Processing Matters in Nutrient-Matched Laboratory
Diets for Mice—Energy and Nutrient Digestibility. Animals 11, Nr. 2. doi:10.3390/ani11020523, .
din1505-2-1: 'Böswald, Linda F. ;
Wenderlein, Jasmin ; Straubinger,
Reinhard K. ; Ulrich, Sebastian
; Kienzle, Ellen: Processing Matters
in Nutrient-Matched Laboratory Diets for Mice—Energy and Nutrient Digestibility.
In: Animals Bd. 11. Basel, MDPI (2021), Nr. 2'
havard: L.F. Böswald, J. Wenderlein, R.K. Straubinger, S. Ulrich, E. Kienzle, Processing
Matters in Nutrient-Matched Laboratory Diets for Mice—Energy and Nutrient Digestibility,
Animals. 11 (2021).
ieee: 'L. F. Böswald, J. Wenderlein, R. K. Straubinger, S. Ulrich, and E. Kienzle,
“Processing Matters in Nutrient-Matched Laboratory Diets for Mice—Energy and Nutrient
Digestibility,” Animals, vol. 11, no. 2, Art. no. 523, 2021, doi: 10.3390/ani11020523.'
mla: Böswald, Linda F., et al. “Processing Matters in Nutrient-Matched Laboratory
Diets for Mice—Energy and Nutrient Digestibility.” Animals, vol. 11, no.
2, 523, 2021, https://doi.org/10.3390/ani11020523.
short: L.F. Böswald, J. Wenderlein, R.K. Straubinger, S. Ulrich, E. Kienzle, Animals
11 (2021).
ufg: 'Böswald, Linda F. u. a.: Processing Matters in Nutrient-Matched Laboratory
Diets for Mice—Energy and Nutrient Digestibility, in: Animals 11 (2021),
H. 2.'
van: Böswald LF, Wenderlein J, Straubinger RK, Ulrich S, Kienzle E. Processing Matters
in Nutrient-Matched Laboratory Diets for Mice—Energy and Nutrient Digestibility.
Animals. 2021;11(2).
date_created: 2025-06-15T10:00:16Z
date_updated: 2025-06-16T12:27:09Z
department:
- _id: DEP4010
doi: 10.3390/ani11020523
extern: '1'
intvolume: ' 11'
issue: '2'
keyword:
- standardization
- carbohydrate digestibility
- feed processing
- starch gelatinization
- gut
language:
- iso: eng
place: Basel
publication: Animals
publication_identifier:
eissn:
- 2076-2615
publication_status: published
publisher: MDPI
quality_controlled: '1'
status: public
title: Processing Matters in Nutrient-Matched Laboratory Diets for Mice—Energy and
Nutrient Digestibility
type: scientific_journal_article
user_id: '83781'
volume: 11
year: '2021'
...
---
_id: '1722'
abstract:
- lang: eng
text: Granular activated carbon (GAC) adsorption, as well as ozonation in combination
with biodegradation was investigated in order to remove refractory organics from
biologically pre-treated process waters (PW) produced by the hydrothermal carbonization
(HTC) of spent grains and fine mulch. Kinetic tests revealed that the organics
in spent grains PW had much lower molecular weights than organics in fine mulch
PW. Moreover, isotherms showed that they were more strongly adsorbable. This was
confirmed in GAC column experiments, where the breakthrough curves could be predicted
fairly well by a dynamic adsorption model. On the other hand, ozonation had a
stronger effect on fine mulch PW with respect to an enhancement of the aerobic
degradability. Thus, the type of input material determines the properties of soluble
reaction products from the carbonization process that must be accounted for when
selecting the most suitable post-treatment method for HTC PW. However, adsorption
on granular activated carbon should always be the final stage.
article_number: '730'
author:
- first_name: Joachim Hans Otto
full_name: Fettig, Joachim Hans Otto
id: '21018'
last_name: Fettig
- first_name: Ute
full_name: Austermann-Haun, Ute
id: '40803'
last_name: Austermann-Haun
- first_name: Jan-Felix
full_name: Meier, Jan-Felix
last_name: Meier
- first_name: Anna
full_name: Busch, Anna
id: '58686'
last_name: Busch
- first_name: Eva
full_name: Gilbert, Eva
last_name: Gilbert
citation:
ama: Fettig JHO, Austermann-Haun U, Meier J-F, Busch A, Gilbert E. Options for Removing
Refractory Organic Substances in Pre-Treated Process Water from Hydrothermal Carbonization.
Water. 2019;11(4). doi:10.3390/w11040730
apa: Fettig, J. H. O., Austermann-Haun, U., Meier, J.-F., Busch, A., & Gilbert,
E. (2019). Options for Removing Refractory Organic Substances in Pre-Treated Process
Water from Hydrothermal Carbonization. Water, 11(4). https://doi.org/10.3390/w11040730
bjps: Fettig JHO et al. (2019) Options for Removing Refractory Organic
Substances in Pre-Treated Process Water from Hydrothermal Carbonization. Water
11.
chicago: Fettig, Joachim Hans Otto, Ute Austermann-Haun, Jan-Felix Meier, Anna Busch,
and Eva Gilbert. “Options for Removing Refractory Organic Substances in Pre-Treated
Process Water from Hydrothermal Carbonization.” Water 11, no. 4 (2019).
https://doi.org/10.3390/w11040730.
chicago-de: Fettig, Joachim Hans Otto, Ute Austermann-Haun, Jan-Felix Meier, Anna
Busch und Eva Gilbert. 2019. Options for Removing Refractory Organic Substances
in Pre-Treated Process Water from Hydrothermal Carbonization. Water 11,
Nr. 4. doi:10.3390/w11040730,
.
din1505-2-1: 'Fettig, Joachim Hans Otto
; Austermann-Haun, Ute ; Meier,
Jan-Felix ; Busch, Anna ;
Gilbert, Eva: Options for Removing
Refractory Organic Substances in Pre-Treated Process Water from Hydrothermal Carbonization.
In: Water Bd. 11. Basel, MDPI (2019), Nr. 4'
havard: J.H.O. Fettig, U. Austermann-Haun, J.-F. Meier, A. Busch, E. Gilbert, Options
for Removing Refractory Organic Substances in Pre-Treated Process Water from Hydrothermal
Carbonization, Water. 11 (2019).
ieee: J. H. O. Fettig, U. Austermann-Haun, J.-F. Meier, A. Busch, and E. Gilbert,
“Options for Removing Refractory Organic Substances in Pre-Treated Process Water
from Hydrothermal Carbonization,” Water, vol. 11, no. 4, 2019.
mla: Fettig, Joachim Hans Otto, et al. “Options for Removing Refractory Organic
Substances in Pre-Treated Process Water from Hydrothermal Carbonization.” Water,
vol. 11, no. 4, 730, MDPI, 2019, doi:10.3390/w11040730.
short: J.H.O. Fettig, U. Austermann-Haun, J.-F. Meier, A. Busch, E. Gilbert, Water
11 (2019).
ufg: 'Fettig, Joachim Hans Otto et. al. (2019): Options for Removing Refractory
Organic Substances in Pre-Treated Process Water from Hydrothermal Carbonization,
in: Water 11 (4).'
van: Fettig JHO, Austermann-Haun U, Meier J-F, Busch A, Gilbert E. Options for Removing
Refractory Organic Substances in Pre-Treated Process Water from Hydrothermal Carbonization.
Water. 2019;11(4).
date_created: 2019-07-30T09:44:40Z
date_updated: 2023-03-15T13:49:37Z
department:
- _id: DEP3000
- _id: DEP8020
doi: 10.3390/w11040730
intvolume: ' 11'
issue: '4'
keyword:
- HTC process water
- post-treatment
- refractory organics
- activated carbon adsorption
- ozonation
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.mdpi.com/2073-4441/11/4/730
oa: '1'
place: Basel
publication: Water
publication_identifier:
issn:
- 2073-4441
publication_status: published
publisher: MDPI
status: public
title: Options for Removing Refractory Organic Substances in Pre-Treated Process Water
from Hydrothermal Carbonization
type: journal_article
user_id: '74004'
volume: 11
year: 2019
...
---
_id: '1901'
abstract:
- lang: eng
text: 'As customers’ options for configuring products to match their requirements
increase, the number of assembly variants grows. Due to this large number of variants,
assembly processes often cannot be automated in an economical way, and manual
assembly remains highly important. Additional support options must be implemented
to continue completing manual assembly processes reliably in the future. Image
processing systems are one promising approach. The purpose of this paper is to
establish the potential offered by industrial image processing in manual assembly,
building on fundamental concepts, as well as to identify requirements and provide
recommendations for selecting and arranging system components. '
author:
- first_name: Alexander
full_name: Nikolenko, Alexander
id: '71431'
last_name: Nikolenko
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
citation:
ama: 'Nikolenko A, Hinrichsen S. Potential of Industrial Image Processing in Manual
Assembly. In: Ahram T, Karwowski W, Pickl S, Taiar R, eds. Human Systems Engineering
and Design II. IHSED 2019. Advances in Intelligent Systems and Computing.
Vol 1026. Advances in Intelligent Systems and Computing. Cham: Springer Nature;
2019:795-800. doi:https://doi.org/10.1007/978-3-030-27928-8_121'
apa: 'Nikolenko, A., & Hinrichsen, S. (2019). Potential of Industrial Image
Processing in Manual Assembly. In T. Ahram, W. Karwowski, S. Pickl, & R. Taiar
(Eds.), Human Systems Engineering and Design II. IHSED 2019. Advances in Intelligent
Systems and Computing (Vol. 1026, pp. 795–800). Cham: Springer Nature. https://doi.org/10.1007/978-3-030-27928-8_121'
bjps: 'Nikolenko A and Hinrichsen S (2019) Potential of Industrial Image
Processing in Manual Assembly. In Ahram T et al. (eds), Human Systems Engineering
and Design II. IHSED 2019. Advances in Intelligent Systems and Computing,
vol. 1026. Cham: Springer Nature, pp. 795–800.'
chicago: 'Nikolenko, Alexander, and Sven Hinrichsen. “Potential of Industrial Image
Processing in Manual Assembly.” In Human Systems Engineering and Design II.
IHSED 2019. Advances in Intelligent Systems and Computing, edited by T. Ahram,
W. Karwowski, S. Pickl, and R. Taiar, 1026:795–800. Advances in Intelligent Systems
and Computing. Cham: Springer Nature, 2019. https://doi.org/10.1007/978-3-030-27928-8_121.'
chicago-de: 'Nikolenko, Alexander und Sven Hinrichsen. 2019. Potential of Industrial
Image Processing in Manual Assembly. In: Human Systems Engineering and Design
II. IHSED 2019. Advances in Intelligent Systems and Computing, hg. von T.
Ahram, W. Karwowski, S. Pickl, und R. Taiar, 1026:795–800. Advances in Intelligent
Systems and Computing. Cham: Springer Nature. doi:https://doi.org/10.1007/978-3-030-27928-8_121,
.'
din1505-2-1: 'Nikolenko, Alexander
; Hinrichsen, Sven: Potential of
Industrial Image Processing in Manual Assembly. In: Ahram,
T. ; Karwowski, W. ; Pickl, S. ; Taiar,
R. (Hrsg.): Human Systems Engineering and Design II. IHSED 2019. Advances
in Intelligent Systems and Computing, Advances in Intelligent Systems and
Computing. Bd. 1026. Cham : Springer Nature, 2019, S. 795–800'
havard: 'A. Nikolenko, S. Hinrichsen, Potential of Industrial Image Processing in
Manual Assembly, in: T. Ahram, W. Karwowski, S. Pickl, R. Taiar (Eds.), Human
Systems Engineering and Design II. IHSED 2019. Advances in Intelligent Systems
and Computing, Springer Nature, Cham, 2019: pp. 795–800.'
ieee: A. Nikolenko and S. Hinrichsen, “Potential of Industrial Image Processing
in Manual Assembly,” in Human Systems Engineering and Design II. IHSED 2019.
Advances in Intelligent Systems and Computing, Universität der Bundeswehr,
München, 2019, vol. 1026, pp. 795–800.
mla: Nikolenko, Alexander, and Sven Hinrichsen. “Potential of Industrial Image Processing
in Manual Assembly.” Human Systems Engineering and Design II. IHSED 2019. Advances
in Intelligent Systems and Computing, edited by T. Ahram et al., vol. 1026,
Springer Nature, 2019, pp. 795–800, doi:https://doi.org/10.1007/978-3-030-27928-8_121.
short: 'A. Nikolenko, S. Hinrichsen, in: T. Ahram, W. Karwowski, S. Pickl, R. Taiar
(Eds.), Human Systems Engineering and Design II. IHSED 2019. Advances in Intelligent
Systems and Computing, Springer Nature, Cham, 2019, pp. 795–800.'
ufg: 'Nikolenko, Alexander/Hinrichsen, Sven (2019): Potential of Industrial
Image Processing in Manual Assembly, in: T. Ahram et. al. (Hgg.): Human Systems
Engineering and Design II. IHSED 2019. Advances in Intelligent Systems and Computing
(=Advances in Intelligent Systems and Computing 1026), Cham, S. 795–800.'
van: 'Nikolenko A, Hinrichsen S. Potential of Industrial Image Processing in Manual
Assembly. In: Ahram T, Karwowski W, Pickl S, Taiar R, editors. Human Systems Engineering
and Design II IHSED 2019 Advances in Intelligent Systems and Computing. Cham:
Springer Nature; 2019. p. 795–800. (Advances in Intelligent Systems and Computing;
vol. 1026).'
conference:
end_date: 2019-09-18
location: Universität der Bundeswehr, München
name: '2nd International Conference on Human Systems Engineering and Design (IHSED2019):
Future Trends and Applications'
start_date: 2019-09-16
date_created: 2019-09-10T05:52:02Z
date_updated: 2023-03-15T13:49:37Z
department:
- _id: DEP7020
- _id: DEP1305
doi: https://doi.org/10.1007/978-3-030-27928-8_121
editor:
- first_name: T.
full_name: Ahram, T.
last_name: Ahram
- first_name: W.
full_name: Karwowski, W.
last_name: Karwowski
- first_name: S.
full_name: Pickl, S.
last_name: Pickl
- first_name: R.
full_name: Taiar, R.
last_name: Taiar
intvolume: ' 1026'
keyword:
- Industrial image processing
- Manual assembly
- Assistance systems
- Machine vision
language:
- iso: eng
page: 795-800
place: Cham
publication: Human Systems Engineering and Design II. IHSED 2019. Advances in Intelligent
Systems and Computing
publication_identifier:
eisbn:
- 978-3-030-27928-8
isbn:
- 978-3-030-27927-1
publication_status: published
publisher: Springer Nature
quality_controlled: '1'
series_title: Advances in Intelligent Systems and Computing
status: public
title: Potential of Industrial Image Processing in Manual Assembly
type: conference
user_id: '74004'
volume: 1026
year: 2019
...
---
_id: '2012'
abstract:
- lang: eng
text: "The rapid growth of optical imaging technologies increased the access and
collection of data, which boosts the demand of data and knowledge discovery. This
is a fast growing topic in several industry and research areas. Nowadays, a large
number of images and signals must be analysed in order to gain and learn proper
knowledge. Detecting images with similar contents without specifying an image,
recently attracts the researches in image processing domain. Motif discovery in
image processing aims to tackle the problem of deriving structures or detecting
regularities in image databases. Most of the motif discovery methods solve this
problem by converting images into one dimensional time series in a pre-processing
step and then applying a motif discovery on these one dimensional time series
for image motifs detection. Nevertheless, this conversion might lead to information
loss and also the problem of inability to discover shifted and multi-scale image
motifs of different size. Contrary to other approaches, here, a method is proposed
to find image motifs of different size in image data sets by employing images
in original dimension (2D) without converting them to one dimensional time series.\r\nThe
proposed approach consists of three steps: Mapping or transformation, feature
extraction and measuring similarities. First, images are inspected by the Complex
Quad Tree Wavelet Packet transform, which provides broad frequency analysis of
an image in various scales. Next, statistical features are extracted from the
wavelet coefficients. Finally, image motifs are detected by measuring the similarity
of the features applying various similarity measures. Here, the performance of
six similarity measures are benchmarked in details. Moreover, the efficiency of
the proposed method is demonstrated on a data set with images from diverse applications
such as hand gesture, text recognition, leaf and plant identification, etc. Additionally,
the robustness of this method is examined with the image data overlaying with
distortions such as noise and blur."
author:
- first_name: Sahar
full_name: Deppe, Sahar
id: '52121'
last_name: Deppe
- first_name: Volker
full_name: Lohweg, Volker
id: '1804'
last_name: Lohweg
orcid: 0000-0002-3325-7887
citation:
ama: Deppe S, Lohweg V. Evaluation of Similarity Measures for Shift-Invariant Image
Motif Discovery. International Journal On Advances in Intelligent Systems.
2017;10(3/4):434-446.
apa: Deppe, S., & Lohweg, V. (2017). Evaluation of Similarity Measures for Shift-Invariant
Image Motif Discovery. International Journal On Advances in Intelligent Systems,
10(3/4), 434–446.
bjps: Deppe S and Lohweg V (2017) Evaluation of Similarity Measures for Shift-Invariant
Image Motif Discovery. International Journal On Advances in Intelligent Systems
10, 434–446.
chicago: 'Deppe, Sahar, and Volker Lohweg. “Evaluation of Similarity Measures for
Shift-Invariant Image Motif Discovery.” International Journal On Advances in
Intelligent Systems 10, no. 3/4 (2017): 434–46.'
chicago-de: 'Deppe, Sahar und Volker Lohweg. 2017. Evaluation of Similarity Measures
for Shift-Invariant Image Motif Discovery. International Journal On Advances
in Intelligent Systems 10, Nr. 3/4: 434–446.'
din1505-2-1: 'Deppe, Sahar ; Lohweg, Volker: Evaluation of Similarity
Measures for Shift-Invariant Image Motif Discovery. In: International Journal
On Advances in Intelligent Systems Bd. 10. [S.l.], IARIA Journals (2017),
Nr. 3/4, S. 434–446'
havard: S. Deppe, V. Lohweg, Evaluation of Similarity Measures for Shift-Invariant
Image Motif Discovery, International Journal On Advances in Intelligent Systems.
10 (2017) 434–446.
ieee: S. Deppe and V. Lohweg, “Evaluation of Similarity Measures for Shift-Invariant
Image Motif Discovery,” International Journal On Advances in Intelligent Systems,
vol. 10, no. 3/4, pp. 434–446, 2017.
mla: Deppe, Sahar, and Volker Lohweg. “Evaluation of Similarity Measures for Shift-Invariant
Image Motif Discovery.” International Journal On Advances in Intelligent Systems,
vol. 10, no. 3/4, IARIA Journals, 2017, pp. 434–46.
short: S. Deppe, V. Lohweg, International Journal On Advances in Intelligent Systems
10 (2017) 434–446.
ufg: 'Deppe, Sahar/Lohweg, Volker (2017): Evaluation of Similarity Measures
for Shift-Invariant Image Motif Discovery, in: International Journal On Advances
in Intelligent Systems 10 (3/4), S. 434–446.'
van: Deppe S, Lohweg V. Evaluation of Similarity Measures for Shift-Invariant Image
Motif Discovery. International Journal On Advances in Intelligent Systems. 2017;10(3/4):434–46.
date_created: 2019-11-25T08:35:54Z
date_updated: 2023-03-15T13:49:38Z
department:
- _id: DEP5023
intvolume: ' 10'
issue: 3/4
keyword:
- processing
- Wavelet transformation.
language:
- iso: eng
main_file_link:
- open_access: '1'
url: http://www.iariajournals.org/intelligent_systems/intsys_v10_n34_2017_paged.pdf
oa: '1'
page: 434 - 446
place: ' [S.l.]'
publication: International Journal On Advances in Intelligent Systems
publication_identifier:
issn:
- 1942-2679
publication_status: published
publisher: IARIA Journals
status: public
title: Evaluation of Similarity Measures for Shift-Invariant Image Motif Discovery
type: journal_article
user_id: '45673'
volume: 10
year: 2017
...
---
_id: '2022'
abstract:
- lang: eng
text: 'Nowadays, the boost of optical imaging technologies results in more data
with a faster rate are being collected. Consequently, data and knowledge discovery
science has become an attractive and a fast growing topic in several industry
and research area. Motif discovery in image processing aims to tackle the problem
of deriving structures or detecting regularities in image databases. Most of the
motif discovery methods first convert images into time series and then attempt
to find motifs in such data. This might lead to information loss and also the
problem of inability to detect shifted and multi-scale image motifs of different
size. Here, a method is proposed to find image motifs of different size in image
datasets by applying images in original dimension without converting them to time
series. Images are inspected by the Complex Quad Tree Wavelet Packet transform
which provides broad frequency analysis of an image in various scales. Next, features
are extracted from the wavelet coefficients. Finally, image motifs are detected
by measuring the similarity of the features. The performance of the proposed method
is demonstrated on a dataset with images from diverse applications, such as hand
gesture, text recognition, leaf and plant identification, etc. '
author:
- first_name: Sahar
full_name: Deppe, Sahar
id: '52121'
last_name: Deppe
- first_name: Volker
full_name: Lohweg, Volker
id: '1804'
last_name: Lohweg
orcid: 0000-0002-3325-7887
citation:
ama: 'Deppe S, Lohweg V. Shift-Invariant Motif Discovery in Image Processing “Best
Paper Award.” In: Leister W, ed. PESARO 2017 The Seventh International Conference
on Performance, Safety and Robustness in Complex Systems and Applications.
PESARO 2017; Venice, Italy : The Seventh International Conference on Performance,
Safety and Robustness in Complex Systems and Applications; Special track MAIS:
Machine Learning Algorithms in Image and Signal Processing; 2017:27-32.'
apa: 'Deppe, S., & Lohweg, V. (2017). Shift-Invariant Motif Discovery in Image
Processing “Best Paper Award.” In W. Leister (Ed.), PESARO 2017 The Seventh
International Conference on Performance, Safety and Robustness in Complex Systems
and Applications (pp. 27–32). PESARO 2017; Venice, Italy : The Seventh International
Conference on Performance, Safety and Robustness in Complex Systems and Applications;
Special track MAIS: Machine Learning Algorithms in Image and Signal Processing.'
bjps: 'Deppe S and Lohweg V (2017) Shift-Invariant Motif Discovery in Image
Processing ‘Best Paper Award’. In Leister W (ed.), PESARO 2017 The Seventh
International Conference on Performance, Safety and Robustness in Complex Systems
and Applications. PESARO 2017; Venice, Italy : The Seventh International
Conference on Performance, Safety and Robustness in Complex Systems and Applications;
Special track MAIS: Machine Learning Algorithms in Image and Signal Processing,
pp. 27–32.'
chicago: 'Deppe, Sahar, and Volker Lohweg. “Shift-Invariant Motif Discovery in Image
Processing ‘Best Paper Award.’” In PESARO 2017 The Seventh International Conference
on Performance, Safety and Robustness in Complex Systems and Applications,
edited by Wolfgang Leister, 27–32. PESARO 2017; Venice, Italy : The Seventh International
Conference on Performance, Safety and Robustness in Complex Systems and Applications;
Special track MAIS: Machine Learning Algorithms in Image and Signal Processing,
2017.'
chicago-de: 'Deppe, Sahar und Volker Lohweg. 2017. Shift-Invariant Motif Discovery
in Image Processing „Best Paper Award“. In: PESARO 2017 The Seventh International
Conference on Performance, Safety and Robustness in Complex Systems and Applications,
hg. von Wolfgang Leister, 27–32. PESARO 2017; Venice, Italy : The Seventh International
Conference on Performance, Safety and Robustness in Complex Systems and Applications;
Special track MAIS: Machine Learning Algorithms in Image and Signal Processing.'
din1505-2-1: 'Deppe, Sahar ; Lohweg, Volker: Shift-Invariant Motif
Discovery in Image Processing „Best Paper Award“. In: Leister,
W. (Hrsg.): PESARO 2017 The Seventh International Conference on Performance,
Safety and Robustness in Complex Systems and Applications. PESARO 2017; Venice,
Italy : The Seventh International Conference on Performance, Safety and Robustness
in Complex Systems and Applications; Special track MAIS: Machine Learning Algorithms
in Image and Signal Processing, 2017, S. 27–32'
havard: 'S. Deppe, V. Lohweg, Shift-Invariant Motif Discovery in Image Processing
“Best Paper Award,” in: W. Leister (Ed.), PESARO 2017 The Seventh International
Conference on Performance, Safety and Robustness in Complex Systems and Applications,
The Seventh International Conference on Performance, Safety and Robustness in
Complex Systems and Applications; Special track MAIS: Machine Learning Algorithms
in Image and Signal Processing, PESARO 2017; Venice, Italy , 2017: pp. 27–32.'
ieee: S. Deppe and V. Lohweg, “Shift-Invariant Motif Discovery in Image Processing
‘Best Paper Award,’” in PESARO 2017 The Seventh International Conference on
Performance, Safety and Robustness in Complex Systems and Applications, Venice,
Italy , 2017, pp. 27–32.
mla: 'Deppe, Sahar, and Volker Lohweg. “Shift-Invariant Motif Discovery in Image
Processing ‘Best Paper Award.’” PESARO 2017 The Seventh International Conference
on Performance, Safety and Robustness in Complex Systems and Applications,
edited by Wolfgang Leister, The Seventh International Conference on Performance,
Safety and Robustness in Complex Systems and Applications; Special track MAIS:
Machine Learning Algorithms in Image and Signal Processing, 2017, pp. 27–32.'
short: 'S. Deppe, V. Lohweg, in: W. Leister (Ed.), PESARO 2017 The Seventh International
Conference on Performance, Safety and Robustness in Complex Systems and Applications,
The Seventh International Conference on Performance, Safety and Robustness in
Complex Systems and Applications; Special track MAIS: Machine Learning Algorithms
in Image and Signal Processing, PESARO 2017; Venice, Italy , 2017, pp. 27–32.'
ufg: 'Deppe, Sahar/Lohweg, Volker (2017): Shift-Invariant Motif Discovery
in Image Processing „Best Paper Award“, in: Wolfgang Leister (Hg.): PESARO
2017 The Seventh International Conference on Performance, Safety and Robustness
in Complex Systems and Applications, PESARO 2017; Venice, Italy , S. 27–32.'
van: 'Deppe S, Lohweg V. Shift-Invariant Motif Discovery in Image Processing “Best
Paper Award.” In: Leister W, editor. PESARO 2017 The Seventh International Conference
on Performance, Safety and Robustness in Complex Systems and Applications. PESARO
2017; Venice, Italy : The Seventh International Conference on Performance, Safety
and Robustness in Complex Systems and Applications; Special track MAIS: Machine
Learning Algorithms in Image and Signal Processing; 2017. p. 27–32.'
conference:
end_date: 2017-04-27
location: 'Venice, Italy '
name: 7. International Conference on Performance (PESARO 2017)
start_date: 2017-04-23
date_created: 2019-11-25T09:06:50Z
date_updated: 2023-03-15T13:49:38Z
department:
- _id: DEP5023
editor:
- first_name: Wolfgang
full_name: Leister, Wolfgang
last_name: Leister
keyword:
- Motif discovery
- Image processing
- Wavelet transformation
language:
- iso: eng
main_file_link:
- open_access: '1'
url: http://www.thinkmind.org/index.php?view=instance&instance=PESARO+2017
oa: '1'
page: 27-32
place: 'PESARO 2017; Venice, Italy '
publication: PESARO 2017 The Seventh International Conference on Performance, Safety
and Robustness in Complex Systems and Applications
publication_identifier:
eisbn:
- 978-1-61208-549-4
eissn:
- 2308-3700
publication_status: published
publisher: 'The Seventh International Conference on Performance, Safety and Robustness
in Complex Systems and Applications; Special track MAIS: Machine Learning Algorithms
in Image and Signal Processing'
status: public
title: Shift-Invariant Motif Discovery in Image Processing 'Best Paper Award'
type: conference
user_id: '15514'
year: 2017
...
---
_id: '575'
abstract:
- lang: eng
text: Additive manufacturing technologies can provide cost and time advantages in
mold making, compared to traditional approaches. Nevertheless, their applicability
is not yet completely proven, especially in terms of surface finishing. The aim
of this research work is to create perfect mold inserts by Selective Laser Melting
(SLM) and to optimize surface quality. Therefore a process is developed to reduce
the effort of surface quality optimization including a high flexibility in design.
The tested process shows that simple and affordable methods can lead to usable
molds with only minor restrictions in terms of appearance. Due to the initial
reduction of layer thicknesses and distinct settings of laser melting parameters,
the surface smoothness is significantly enhanced during the SLM building process.
Subsequently blasting, manual grinding, as well as polishing operations, enable
a selective smoothening of the surface up to a polished finish. As a result, the
built tool parts can be used instantly for injection molding.
author:
- first_name: O.
full_name: Elstermeyer, O.
last_name: Elstermeyer
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
id: '14290'
last_name: Villmer
citation:
ama: 'Elstermeyer O, Villmer F-J. SLM Based Tooling for Injection Molding - Focus
on Reduced Effort in Surface Quality Optimization. In: Padoano E, Villmer F-J,
Department of Production Engineering and Management, eds. Production Engineering
and Management. Publication series in direct digital manufacturing . Lemgo;
2017:101-113.'
apa: Elstermeyer, O., & Villmer, F.-J. (2017). SLM Based Tooling for Injection
Molding - Focus on Reduced Effort in Surface Quality Optimization. In E. Padoano,
F.-J. Villmer, & Department of Production Engineering and Management (Eds.),
Production Engineering and Management (pp. 101–113). Lemgo.
bjps: Elstermeyer O and Villmer F-J (2017) SLM Based Tooling for Injection
Molding - Focus on Reduced Effort in Surface Quality Optimization. In Padoano
E, Villmer F-J and Department of Production Engineering and Management (eds),
Production Engineering and Management. Lemgo, pp. 101–113.
chicago: Elstermeyer, O., and Franz-Josef Villmer. “SLM Based Tooling for Injection
Molding - Focus on Reduced Effort in Surface Quality Optimization.” In Production
Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and
Department of Production Engineering and Management, 101–13. Publication Series
in Direct Digital Manufacturing . Lemgo, 2017.
chicago-de: 'Elstermeyer, O. und Franz-Josef Villmer. 2017. SLM Based Tooling for
Injection Molding - Focus on Reduced Effort in Surface Quality Optimization. In:
Production Engineering and Management, hg. von Elio Padoano, Franz-Josef
Villmer, und Department of Production Engineering and Management, 101–113. Publication
series in direct digital manufacturing . Lemgo.'
din1505-2-1: 'Elstermeyer, O. ; Villmer, Franz-Josef: SLM Based Tooling
for Injection Molding - Focus on Reduced Effort in Surface Quality Optimization.
In: Padoano, E. ; Villmer,
F.-J. ; Department of Production
Engineering and Management (Hrsg.): Production Engineering and Management,
Publication series in direct digital manufacturing . Lemgo, 2017, S. 101–113'
havard: 'O. Elstermeyer, F.-J. Villmer, SLM Based Tooling for Injection Molding
- Focus on Reduced Effort in Surface Quality Optimization, in: E. Padoano, F.-J.
Villmer, Department of Production Engineering and Management (Eds.), Production
Engineering and Management, Lemgo, 2017: pp. 101–113.'
ieee: O. Elstermeyer and F.-J. Villmer, “SLM Based Tooling for Injection Molding
- Focus on Reduced Effort in Surface Quality Optimization,” in Production Engineering
and Management, Pordenone, Italy, 2017, no. 1, pp. 101–113.
mla: Elstermeyer, O., and Franz-Josef Villmer. “SLM Based Tooling for Injection
Molding - Focus on Reduced Effort in Surface Quality Optimization.” Production
Engineering and Management, edited by Elio Padoano et al., no. 1, 2017, pp.
101–13.
short: 'O. Elstermeyer, F.-J. Villmer, in: E. Padoano, F.-J. Villmer, Department
of Production Engineering and Management (Eds.), Production Engineering and Management,
Lemgo, 2017, pp. 101–113.'
ufg: 'Elstermeyer, O./Villmer, Franz-Josef (2017): SLM Based Tooling for
Injection Molding - Focus on Reduced Effort in Surface Quality Optimization, in:
Elio Padoano et. al. (Hgg.): Production Engineering and Management (=Publication
series in direct digital manufacturing ), Lemgo, S. 101–113.'
van: 'Elstermeyer O, Villmer F-J. SLM Based Tooling for Injection Molding - Focus
on Reduced Effort in Surface Quality Optimization. In: Padoano E, Villmer F-J,
Department of Production Engineering and Management, editors. Production Engineering
and Management. Lemgo; 2017. p. 101–13. (Publication series in direct digital
manufacturing ).'
conference:
end_date: 2017-09-29
location: Pordenone, Italy
name: Proceedings7th International Conference
start_date: 2017-09-28
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-18T11:16:07Z
date_updated: 2023-03-15T13:50:01Z
department:
- _id: DEP1306
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
issue: '1'
keyword:
- Tool making
- Direct rapid tooling
- Additively manufactured molds
- Selective laser melting
- Additive manufacturing process chain
- Post-processing
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf
oa: '1'
page: 101-113
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-946856-01-6
publication_status: published
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf
series_title: 'Publication series in direct digital manufacturing '
status: public
title: SLM Based Tooling for Injection Molding - Focus on Reduced Effort in Surface
Quality Optimization
type: conference
user_id: '45673'
year: 2017
...
---
_id: '2128'
abstract:
- lang: eng
text: We present the concept of a perceptive motor in terms of a cyber-physical
system (CPS). A model application monitoring a knitting process was developed,
where the take-off of the produced fabric is controlled by an electric motor.
The idea is to equip a synchronous motor with a smart camera and appropriate image
processing hard- and software components. Subsequently, the characteristics of
knitted fabric are analysed by machine-learning (ML) methods. Our concept includes
motor-current analysis and image processing. The aim is to implement an assistance
system for the industrial large circular knitting process. An assistance system
will help to shorten the retrofitting process. The concept is based on a low cost
hardware approach for a smart camera, and stems from the recent development of
image processing applications for mobile devices [1–4].
author:
- first_name: Kristijan
full_name: Vukovic, Kristijan
last_name: Vukovic
- first_name: Kristina
full_name: Simonis, Kristina
last_name: Simonis
- first_name: Helene
full_name: Dörksen, Helene
id: '46416'
last_name: Dörksen
- first_name: Volker
full_name: Lohweg, Volker
id: '1804'
last_name: Lohweg
orcid: 0000-0002-3325-7887
citation:
ama: 'Vukovic K, Simonis K, Dörksen H, Lohweg V. Efficient Image Processing System
for an Industrial Machine Learning Task. In: Conference on Machine Learning
for Cyber-Physical Systems (ML4CPS). Fraunhofer Application Centre IOSB-INA,
Lemgo; 2015. doi:10.1007/978-3-662-48838-6_8'
apa: Vukovic, K., Simonis, K., Dörksen, H., & Lohweg, V. (2015). Efficient Image
Processing System for an Industrial Machine Learning Task. In Conference on
Machine Learning for Cyber-Physical Systems (ML4CPS). Fraunhofer Application
Centre IOSB-INA, Lemgo. https://doi.org/10.1007/978-3-662-48838-6_8
bjps: Vukovic K et al. (2015) Efficient Image Processing System for
an Industrial Machine Learning Task. Conference on Machine Learning for Cyber-Physical
Systems (ML4CPS). Fraunhofer Application Centre IOSB-INA, Lemgo.
chicago: Vukovic, Kristijan, Kristina Simonis, Helene Dörksen, and Volker Lohweg.
“Efficient Image Processing System for an Industrial Machine Learning Task.” In
Conference on Machine Learning for Cyber-Physical Systems (ML4CPS). Fraunhofer
Application Centre IOSB-INA, Lemgo, 2015. https://doi.org/10.1007/978-3-662-48838-6_8.
chicago-de: 'Vukovic, Kristijan, Kristina Simonis, Helene Dörksen und Volker Lohweg.
2015. Efficient Image Processing System for an Industrial Machine Learning Task.
In: Conference on Machine Learning for Cyber-Physical Systems (ML4CPS).
Fraunhofer Application Centre IOSB-INA, Lemgo. doi:10.1007/978-3-662-48838-6_8,
.'
din1505-2-1: 'Vukovic, Kristijan ;
Simonis, Kristina ; Dörksen,
Helene ; Lohweg, Volker:
Efficient Image Processing System for an Industrial Machine Learning Task. In:
Conference on Machine Learning for Cyber-Physical Systems (ML4CPS). Fraunhofer
Application Centre IOSB-INA, Lemgo, 2015'
havard: 'K. Vukovic, K. Simonis, H. Dörksen, V. Lohweg, Efficient Image Processing
System for an Industrial Machine Learning Task, in: Conference on Machine Learning
for Cyber-Physical Systems (ML4CPS), Fraunhofer Application Centre IOSB-INA, Lemgo,
2015.'
ieee: K. Vukovic, K. Simonis, H. Dörksen, and V. Lohweg, “Efficient Image Processing
System for an Industrial Machine Learning Task,” in Conference on Machine Learning
for Cyber-Physical Systems (ML4CPS), 2015.
mla: Vukovic, Kristijan, et al. “Efficient Image Processing System for an Industrial
Machine Learning Task.” Conference on Machine Learning for Cyber-Physical Systems
(ML4CPS), 2015, doi:10.1007/978-3-662-48838-6_8.
short: 'K. Vukovic, K. Simonis, H. Dörksen, V. Lohweg, in: Conference on Machine
Learning for Cyber-Physical Systems (ML4CPS), Fraunhofer Application Centre IOSB-INA,
Lemgo, 2015.'
ufg: 'Vukovic, Kristijan et. al. (2015): Efficient Image Processing System
for an Industrial Machine Learning Task, in: Conference on Machine Learning
for Cyber-Physical Systems (ML4CPS), Fraunhofer Application Centre IOSB-INA,
Lemgo.'
van: 'Vukovic K, Simonis K, Dörksen H, Lohweg V. Efficient Image Processing System
for an Industrial Machine Learning Task. In: Conference on Machine Learning for
Cyber-Physical Systems (ML4CPS). Fraunhofer Application Centre IOSB-INA, Lemgo;
2015.'
date_created: 2019-12-04T09:04:50Z
date_updated: 2023-03-15T13:49:38Z
department:
- _id: DEP5023
doi: 10.1007/978-3-662-48838-6_8
keyword:
- Assistance System
- Euler Number
- Synchronous Motor
- Image Processing System
- Image Processing Method
language:
- iso: eng
main_file_link:
- url: https://link.springer.com/chapter/10.1007/978-3-662-48838-6_8
place: Fraunhofer Application Centre IOSB-INA, Lemgo
publication: Conference on Machine Learning for Cyber-Physical Systems (ML4CPS)
status: public
title: Efficient Image Processing System for an Industrial Machine Learning Task
type: conference
user_id: '68554'
year: 2015
...
---
_id: '2155'
abstract:
- lang: eng
text: Today, mobile devices (smartphones, tablets, etc.) are widespread and of high
importance for their users. Their performance as well as versatility increases
over time. This leads to the opportunity to use such devices for more specific
tasks like image processing in an industrial context. For the analysis of images
requirements like image quality (blur, illumination, etc.) as well as a defined
relative position of the object to be inspected are crucial. Since mobile devices
are handheld and used in constantly changing environments the challenge is to
fulfill these requirements. We present an approach to overcome the obstacles and
stabilize the image capturing process such that image analysis becomes significantly
improved on mobile devices. Therefore, image processing methods are combined with
sensor fusion concepts. The approach consists of three main parts. First, pose
estimation methods are used to guide a user moving the device to a defined position.
Second, the sensors data and the pose information are combined for relative motion
estimation. Finally, the image capturing process is automated. It is triggered
depending on the alignment of the device and the object as well as the image quality
that can be achieved under consideration of motion and environmental effects.
author:
- first_name: Kai-Fabian
full_name: Henning, Kai-Fabian
id: '44017'
last_name: Henning
- first_name: Alexander
full_name: Fritze, Alexander
last_name: Fritze
- first_name: Eugen
full_name: Gillich, Eugen
id: '1706'
last_name: Gillich
- first_name: Uwe
full_name: Mönks, Uwe
id: '1825'
last_name: Mönks
- first_name: Volker
full_name: Lohweg, Volker
id: '1804'
last_name: Lohweg
orcid: 0000-0002-3325-7887
citation:
ama: 'Henning K-F, Fritze A, Gillich E, Mönks U, Lohweg V. Stable Image Acquisition
for Mobile Image Processing Applications. In: IST/SPIE Electronic Imaging 2015,
Digital Photography and Mobile Imaging XI. San Francisco, CA, USA: SPIE; 2015:1-12.
doi:10.1117/12.2076146'
apa: 'Henning, K.-F., Fritze, A., Gillich, E., Mönks, U., & Lohweg, V. (2015).
Stable Image Acquisition for Mobile Image Processing Applications. In IST/SPIE
Electronic Imaging 2015, Digital Photography and Mobile Imaging XI (pp. 1–12).
San Francisco, CA, USA: SPIE. https://doi.org/10.1117/12.2076146'
bjps: 'Henning K-F et al. (2015) Stable Image Acquisition for Mobile
Image Processing Applications. IST/SPIE Electronic Imaging 2015, Digital Photography
and Mobile Imaging XI. San Francisco, CA, USA: SPIE, pp. 1–12.'
chicago: 'Henning, Kai-Fabian, Alexander Fritze, Eugen Gillich, Uwe Mönks, and Volker
Lohweg. “Stable Image Acquisition for Mobile Image Processing Applications.” In
IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging XI,
1–12. San Francisco, CA, USA: SPIE, 2015. https://doi.org/10.1117/12.2076146.'
chicago-de: 'Henning, Kai-Fabian, Alexander Fritze, Eugen Gillich, Uwe Mönks und
Volker Lohweg. 2015. Stable Image Acquisition for Mobile Image Processing Applications.
In: IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging
XI, 1–12. San Francisco, CA, USA: SPIE. doi:10.1117/12.2076146,
.'
din1505-2-1: 'Henning, Kai-Fabian
; Fritze, Alexander ; Gillich,
Eugen ; Mönks, Uwe ; Lohweg, Volker: Stable Image Acquisition
for Mobile Image Processing Applications. In: IST/SPIE Electronic Imaging 2015,
Digital Photography and Mobile Imaging XI. San Francisco, CA, USA : SPIE,
2015, S. 1–12'
havard: 'K.-F. Henning, A. Fritze, E. Gillich, U. Mönks, V. Lohweg, Stable Image
Acquisition for Mobile Image Processing Applications, in: IST/SPIE Electronic
Imaging 2015, Digital Photography and Mobile Imaging XI, SPIE, San Francisco,
CA, USA, 2015: pp. 1–12.'
ieee: K.-F. Henning, A. Fritze, E. Gillich, U. Mönks, and V. Lohweg, “Stable Image
Acquisition for Mobile Image Processing Applications,” in IST/SPIE Electronic
Imaging 2015, Digital Photography and Mobile Imaging XI, 2015, pp. 1–12.
mla: Henning, Kai-Fabian, et al. “Stable Image Acquisition for Mobile Image Processing
Applications.” IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile
Imaging XI, SPIE, 2015, pp. 1–12, doi:10.1117/12.2076146.
short: 'K.-F. Henning, A. Fritze, E. Gillich, U. Mönks, V. Lohweg, in: IST/SPIE
Electronic Imaging 2015, Digital Photography and Mobile Imaging XI, SPIE, San
Francisco, CA, USA, 2015, pp. 1–12.'
ufg: 'Henning, Kai-Fabian et. al. (2015): Stable Image Acquisition for Mobile
Image Processing Applications, in: IST/SPIE Electronic Imaging 2015, Digital
Photography and Mobile Imaging XI, San Francisco, CA, USA, S. 1–12.'
van: 'Henning K-F, Fritze A, Gillich E, Mönks U, Lohweg V. Stable Image Acquisition
for Mobile Image Processing Applications. In: IST/SPIE Electronic Imaging 2015,
Digital Photography and Mobile Imaging XI. San Francisco, CA, USA: SPIE; 2015.
p. 1–12.'
date_created: 2019-12-04T10:07:01Z
date_updated: 2023-03-15T13:49:39Z
department:
- _id: DEP5023
doi: 10.1117/12.2076146
keyword:
- Image processing
- Image acquisition
- Mobile devices Sensors
- Image fusion
- Motion estimation
- Cameras
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.spiedigitallibrary.org/conference-proceedings-of-spie/9404/94040N/Stable-image-acquisition-for-mobile-image-processing-applications/10.1117/12.2076146.full?SSO=1
oa: '1'
page: 1-12
place: San Francisco, CA, USA
publication: IST/SPIE Electronic Imaging 2015, Digital Photography and Mobile Imaging
XI
publisher: SPIE
status: public
title: Stable Image Acquisition for Mobile Image Processing Applications
type: conference
user_id: '68554'
year: 2015
...
---
_id: '4336'
abstract:
- lang: eng
text: "Prolonged life expectancy along with the increasing complexity of medicine
and health services raises health costs worldwide dramatically. Whilst the smart
health concept has much potential to support the concept of the emerging P4-medicine
(preventive, participatory, predictive, and personalized), such high-tech medicine
produces large amounts of high-dimensional, weakly-structured data sets and massive
amounts of unstructured information. All these technological approaches along
with “big data” are turning the medical sciences into a data-intensive science.
To keep pace with the growing amounts of complex data, smart hospital approaches
are a commandment of the future, necessitating context aware computing along with
advanced interaction paradigms in new physical-digital ecosystems.\r\n\r\nThe
very successful synergistic combination of methodologies and approaches from Human-Computer
Interaction (HCI) and Knowledge Discovery and Data Mining (KDD) offers ideal conditions
for the vision to support human intelligence with machine learning.\r\n\r\nThe
papers selected for this volume focus on hot topics in smart health; they discuss
open problems and future challenges in order to provide a research agenda to stimulate
further research and progress."
citation:
ama: 'Holzinger A, Röcker C, Ziefle M, eds. Smart Health: Open Problems and Future
Challenges. Vol 8700. Heidelberg: Springer; 2015. doi:10.1007/978-3-319-16226-3'
apa: 'Holzinger, A., Röcker, C., & Ziefle, M. (Eds.). (2015). Smart Health:
Open Problems and Future Challenges (Vol. 8700). Heidelberg: Springer. https://doi.org/10.1007/978-3-319-16226-3'
bjps: 'Holzinger A, Röcker C and Ziefle M (eds) (2015) Smart Health: Open
Problems and Future Challenges. Heidelberg: Springer.'
chicago: 'Holzinger, Andreas, Carsten Röcker, and Martina Ziefle, eds. Smart
Health: Open Problems and Future Challenges. Vol. 8700. Lecture Notes in Computer
Science / Information Systems and Applications, Incl. Internet/Web, and HCI.
Heidelberg: Springer, 2015. https://doi.org/10.1007/978-3-319-16226-3.'
chicago-de: 'Holzinger, Andreas, Carsten Röcker und Martina Ziefle, Hrsg. 2015.
Smart Health: Open Problems and Future Challenges. Bd. 8700. Lecture Notes
in Computer Science / Information Systems and Applications, incl. Internet/Web,
and HCI. Heidelberg: Springer. doi:10.1007/978-3-319-16226-3,
.'
din1505-2-1: 'Holzinger, A. ; Röcker, C. ; Ziefle,
M. (Hrsg.): Smart Health: Open Problems and Future Challenges, Lecture
Notes in Computer Science / Information Systems and Applications, incl. Internet/Web,
and HCI. Bd. 8700. Heidelberg : Springer, 2015'
havard: 'A. Holzinger, C. Röcker, M. Ziefle, eds., Smart Health: Open Problems and
Future Challenges, Springer, Heidelberg, 2015.'
ieee: 'A. Holzinger, C. Röcker, and M. Ziefle, Eds., Smart Health: Open Problems
and Future Challenges, vol. 8700. Heidelberg: Springer, 2015.'
mla: 'Holzinger, Andreas, et al., editors. Smart Health: Open Problems and Future
Challenges. Vol. 8700, Springer, 2015, doi:10.1007/978-3-319-16226-3.'
short: 'A. Holzinger, C. Röcker, M. Ziefle, eds., Smart Health: Open Problems and
Future Challenges, Springer, Heidelberg, 2015.'
ufg: 'Holzinger, Andreas et. al. (Hgg.) (2015): Smart Health: Open Problems
and Future Challenges (=Lecture Notes in Computer Science / Information Systems
and Applications, incl. Internet/Web, and HCI 8700), Heidelberg.'
van: 'Holzinger A, Röcker C, Ziefle M, editors. Smart Health: Open Problems and
Future Challenges. Heidelberg: Springer; 2015. 275 p. (Lecture Notes in Computer
Science / Information Systems and Applications, incl. Internet/Web, and HCI;
vol. 8700).'
date_created: 2021-01-08T12:03:52Z
date_updated: 2023-03-15T13:49:52Z
department:
- _id: DEP5023
doi: 10.1007/978-3-319-16226-3
editor:
- first_name: Andreas
full_name: Holzinger, Andreas
last_name: Holzinger
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
- first_name: Martina
full_name: Ziefle, Martina
last_name: Ziefle
intvolume: ' 8700'
keyword:
- HCI
- ambient assisted living
- big data
- computational intelligence
- context awareness
- data centric medicine
- decision support
- interactive data mining
- keyword detection
- knoweldge bases
- knoweldge discovery
- machine learning
- medical decision support
- medical informatics
- natural language processing
- pervasive health
- smart home
- ubiquitous computing
- visualization
- wearable sensors
language:
- iso: eng
main_file_link:
- open_access: '1'
url: 'http://www.springerlink.com/content/978-3-319-16226-3 '
oa: '1'
page: '275'
place: Heidelberg
publication_identifier:
eisbn:
- 978-3-319-16226-3
eissn:
- 1611-3349
isbn:
- 978-3-319-16225-6
issn:
- 0302-9743
publication_status: published
publisher: Springer
series_title: Lecture Notes in Computer Science / Information Systems and Applications,
incl. Internet/Web, and HCI
status: public
title: 'Smart Health: Open Problems and Future Challenges'
type: book_editor
user_id: '15514'
volume: 8700
year: 2015
...
---
_id: '1158'
abstract:
- lang: eng
text: This thesis is a concept how to build up a media archive for the department
of media production of University of Applied Science in Lemgo. It serves two purposes,
the perma-nent storage of media data and forms a base to allow the creation of
high quality presen-tation material. It contains an analysis of the current situation
concerning collecting, storing and processing media data as well as ideas to alter
the system. Furthermore guidelines are developed for diverse areas, e.g. data
management, data storage and or-ganisation. The aim of this project is to improve
public relations and therefore the image and exterior view of the department.
author:
- first_name: Stefan
full_name: Bandeck, Stefan
last_name: Bandeck
citation:
ama: 'Bandeck S. Media Archive (MIA) 2011. Lemgo: Hochschule Ostwestfalen-Lippe;
2011.'
apa: 'Bandeck, S. (2011). Media Archive (MIA) 2011. Lemgo: Hochschule Ostwestfalen-Lippe.'
bjps: 'Bandeck S (2011) Media Archive (MIA) 2011. Lemgo: Hochschule
Ostwestfalen-Lippe.'
chicago: 'Bandeck, Stefan. Media Archive (MIA) 2011. Lemgo: Hochschule Ostwestfalen-Lippe,
2011.'
chicago-de: 'Bandeck, Stefan. 2011. Media Archive (MIA) 2011. Lemgo: Hochschule
Ostwestfalen-Lippe.'
din1505-2-1: 'Bandeck, Stefan: Media
Archive (MIA) 2011. Lemgo : Hochschule Ostwestfalen-Lippe, 2011'
havard: S. Bandeck, Media Archive (MIA) 2011, Hochschule Ostwestfalen-Lippe, Lemgo,
2011.
ieee: 'S. Bandeck, Media Archive (MIA) 2011. Lemgo: Hochschule Ostwestfalen-Lippe,
2011.'
mla: Bandeck, Stefan. Media Archive (MIA) 2011. Hochschule Ostwestfalen-Lippe,
2011.
short: S. Bandeck, Media Archive (MIA) 2011, Hochschule Ostwestfalen-Lippe, Lemgo,
2011.
ufg: 'Bandeck, Stefan (2011): Media Archive (MIA) 2011, Lemgo.'
van: 'Bandeck S. Media Archive (MIA) 2011. Lemgo: Hochschule Ostwestfalen-Lippe;
2011. 76 p.'
date_created: 2019-05-13T12:17:31Z
date_updated: 2023-03-15T13:49:35Z
ddc:
- '650'
department:
- _id: DEP2001
file:
- access_level: local
content_type: application/pdf
creator: hemke
date_created: 2019-05-13T12:22:29Z
date_updated: 2019-05-13T12:22:29Z
file_id: '1159'
file_name: stb_ma11.pdf
file_size: 1687539
relation: main_file
file_date_updated: 2019-05-13T12:22:29Z
has_accepted_license: '1'
keyword:
- Media archive
- MIA
- public relations
- data management
- data storage
- data processing
language:
- iso: ger
page: '76'
place: Lemgo
publication_status: published
publisher: Hochschule Ostwestfalen-Lippe
status: public
title: Media Archive (MIA) 2011
type: bachelor_thesis
user_id: '15514'
year: 2011
...
---
_id: '2058'
abstract:
- lang: eng
text: Nonlinear spatial transforms and fuzzy pattern classification with unimodal
potential functions are established in signal processing. They have proved to
be excellent tools in feature extraction and classification. In this paper we
present a hardware accelerated image processing and classification scheme for
rotation and translation tolerant two-dimensional pattern recognition, which is
based on one-dimensional nonlinear discrete circular transforms. However, the
scheme is simple; it is stable and therefore well suited for industrial applications.
An implementation on one field programmable gate array (FPGA) is proposed.
author:
- first_name: Tobias
full_name: Henke, Tobias
last_name: Henke
- first_name: Volker
full_name: Lohweg, Volker
id: '1804'
last_name: Lohweg
orcid: 0000-0002-3325-7887
citation:
ama: 'Henke T, Lohweg V. A Simplified Scheme For Hardware-Based Pattern Recognition.
In: IEEE International Conference On Image Processing (ICIP), Proceedings.
Genova: IEEE; 2005:349-352. doi:
10.1109/ICIP.2005.1529759'
apa: 'Henke, T., & Lohweg, V. (2005). A Simplified Scheme For Hardware-Based
Pattern Recognition. In IEEE International Conference On Image Processing (ICIP),
Proceedings (pp. 349–352). Genova: IEEE. https://doi.org/
10.1109/ICIP.2005.1529759'
bjps: 'Henke T and Lohweg V (2005) A Simplified Scheme For Hardware-Based
Pattern Recognition. IEEE International Conference On Image Processing (ICIP),
Proceedings. Genova: IEEE, pp. 349–352.'
chicago: 'Henke, Tobias, and Volker Lohweg. “A Simplified Scheme For Hardware-Based
Pattern Recognition.” In IEEE International Conference On Image Processing
(ICIP), Proceedings, 349–52. Genova: IEEE, 2005. https://doi.org/ 10.1109/ICIP.2005.1529759.'
chicago-de: 'Henke, Tobias und Volker Lohweg. 2005. A Simplified Scheme For Hardware-Based
Pattern Recognition. In: IEEE International Conference On Image Processing
(ICIP), Proceedings, 349–352. Genova: IEEE. doi: 10.1109/ICIP.2005.1529759, .'
din1505-2-1: 'Henke, Tobias ; Lohweg, Volker: A Simplified Scheme For
Hardware-Based Pattern Recognition. In: IEEE International Conference On Image
Processing (ICIP), Proceedings. Genova : IEEE, 2005, S. 349–352'
havard: 'T. Henke, V. Lohweg, A Simplified Scheme For Hardware-Based Pattern Recognition,
in: IEEE International Conference On Image Processing (ICIP), Proceedings, IEEE,
Genova, 2005: pp. 349–352.'
ieee: T. Henke and V. Lohweg, “A Simplified Scheme For Hardware-Based Pattern Recognition,”
in IEEE International Conference On Image Processing (ICIP), Proceedings,
2005, pp. 349–352.
mla: Henke, Tobias, and Volker Lohweg. “A Simplified Scheme For Hardware-Based Pattern
Recognition.” IEEE International Conference On Image Processing (ICIP), Proceedings,
IEEE, 2005, pp. 349–52, doi:
10.1109/ICIP.2005.1529759.
short: 'T. Henke, V. Lohweg, in: IEEE International Conference On Image Processing
(ICIP), Proceedings, IEEE, Genova, 2005, pp. 349–352.'
ufg: 'Henke, Tobias/Lohweg, Volker (2005): A Simplified Scheme For Hardware-Based
Pattern Recognition, in: IEEE International Conference On Image Processing
(ICIP), Proceedings, Genova, S. 349–352.'
van: 'Henke T, Lohweg V. A Simplified Scheme For Hardware-Based Pattern Recognition.
In: IEEE International Conference On Image Processing (ICIP), Proceedings. Genova:
IEEE; 2005. p. 349–52.'
date_created: 2019-11-29T13:17:49Z
date_updated: 2023-03-15T13:49:38Z
department:
- _id: DEP5023
doi: ' 10.1109/ICIP.2005.1529759'
keyword:
- Pattern recognition
- Field programmable gate arrays
- Neural networks
- Image processing
- Discrete transforms
- Signal processing
- Image retrieval
- Image recognition
- Transient analysis
- Fuzzy systems
language:
- iso: eng
main_file_link:
- url: https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=1529759
page: 349 - 352
place: Genova
publication: IEEE International Conference On Image Processing (ICIP), Proceedings
publication_identifier:
eissn:
- '2381-8549 '
isbn:
- 0-7803-9134-9
issn:
- '1522-4880 '
publication_status: published
publisher: IEEE
status: public
title: A Simplified Scheme For Hardware-Based Pattern Recognition
type: conference
user_id: '45673'
year: 2005
...
---
_id: '2056'
abstract:
- lang: eng
text: Nonlinear spatial transforms and fuzzy pattern classification with unimodal
potential functions are established in signal processing. They have proved to
be excellent tools in feature extraction and classification. In this paper, we
will present a hardware-accelerated image processing and classification system
which is implemented on one field-programmable gate array (FPGA). Nonlinear discrete
circular transforms generate a feature vector. The features are analyzed by a
fuzzy classifier. This principle can be used for feature extraction, pattern recognition,
and classification tasks. Implementation in radix-2 structures is possible, allowing
fast calculations with a computational complexity of up to. Furthermore, the pattern
separability properties of these transforms are better than those achieved with
the well-known method based on the power spectrum of the Fourier Transform, or
on several other transforms. Using different signal flow structures, the transforms
can be adapted to different image and signal processing applications.
author:
- first_name: Volker
full_name: Lohweg, Volker
id: '1804'
last_name: Lohweg
orcid: 0000-0002-3325-7887
- first_name: Carsten
full_name: Diederichs, Carsten
id: '44209'
last_name: Diederichs
- first_name: Dietmar
full_name: Müller, Dietmar
last_name: Müller
citation:
ama: 'Lohweg V, Diederichs C, Müller D. Algorithms for Hardware-Based Pattern Recognition.
EURASIP journal on applied signal processing : a publication of the European
Association for Speech, Signal, and Image Processing . 2004;12(1):1912-1920.
doi:https://doi.org/10.1155/S1110865704404247'
apa: 'Lohweg, V., Diederichs, C., & Müller, D. (2004). Algorithms for Hardware-Based
Pattern Recognition. EURASIP Journal on Applied Signal Processing : A Publication
of the European Association for Speech, Signal, and Image Processing , 12(1),
1912–1920. https://doi.org/10.1155/S1110865704404247'
bjps: 'Lohweg V, Diederichs C and Müller D (2004) Algorithms for Hardware-Based
Pattern Recognition. EURASIP journal on applied signal processing : a publication
of the European Association for Speech, Signal, and Image Processing 12,
1912–1920.'
chicago: 'Lohweg, Volker, Carsten Diederichs, and Dietmar Müller. “Algorithms for
Hardware-Based Pattern Recognition.” EURASIP Journal on Applied Signal Processing :
A Publication of the European Association for Speech, Signal, and Image Processing
12, no. 1 (2004): 1912–20. https://doi.org/10.1155/S1110865704404247.'
chicago-de: 'Lohweg, Volker, Carsten Diederichs und Dietmar Müller. 2004. Algorithms
for Hardware-Based Pattern Recognition. EURASIP journal on applied signal processing :
a publication of the European Association for Speech, Signal, and Image Processing
12, Nr. 1: 1912–1920. doi:https://doi.org/10.1155/S1110865704404247,
.'
din1505-2-1: 'Lohweg, Volker ; Diederichs, Carsten ; Müller,
Dietmar: Algorithms for Hardware-Based Pattern Recognition. In: EURASIP
journal on applied signal processing : a publication of the European Association
for Speech, Signal, and Image Processing Bd. 12. Akron, Ohio, Hindawi Publ.
(2004), Nr. 1, S. 1912–1920'
havard: 'V. Lohweg, C. Diederichs, D. Müller, Algorithms for Hardware-Based Pattern
Recognition, EURASIP Journal on Applied Signal Processing : A Publication of the
European Association for Speech, Signal, and Image Processing . 12 (2004) 1912–1920.'
ieee: 'V. Lohweg, C. Diederichs, and D. Müller, “Algorithms for Hardware-Based Pattern
Recognition,” EURASIP journal on applied signal processing : a publication
of the European Association for Speech, Signal, and Image Processing , vol.
12, no. 1, pp. 1912–1920, 2004.'
mla: 'Lohweg, Volker, et al. “Algorithms for Hardware-Based Pattern Recognition.”
EURASIP Journal on Applied Signal Processing : A Publication of the European
Association for Speech, Signal, and Image Processing , vol. 12, no. 1, Hindawi
Publ., 2004, pp. 1912–20, doi:https://doi.org/10.1155/S1110865704404247.'
short: 'V. Lohweg, C. Diederichs, D. Müller, EURASIP Journal on Applied Signal Processing :
A Publication of the European Association for Speech, Signal, and Image Processing 12
(2004) 1912–1920.'
ufg: 'Lohweg, Volker et. al. (2004): Algorithms for Hardware-Based Pattern
Recognition, in: EURASIP journal on applied signal processing : a publication
of the European Association for Speech, Signal, and Image Processing 12
(1), S. 1912–1920.'
van: 'Lohweg V, Diederichs C, Müller D. Algorithms for Hardware-Based Pattern Recognition.
EURASIP journal on applied signal processing : a publication of the European Association
for Speech, Signal, and Image Processing . 2004;12(1):1912–20.'
date_created: 2019-11-29T13:09:05Z
date_updated: 2023-03-15T13:49:38Z
department:
- _id: DEP5023
doi: https://doi.org/10.1155/S1110865704404247
intvolume: ' 12'
issue: '1'
keyword:
- image processing
- nonlinear circular transforms
- feature extraction
- fuzzy pattern recognition
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://asp-eurasipjournals.springeropen.com/track/pdf/10.1155/S1110865704404247
oa: '1'
page: 1912-1920
place: Akron, Ohio
publication: 'EURASIP journal on applied signal processing : a publication of the
European Association for Speech, Signal, and Image Processing '
publication_identifier:
issn:
- '1110-8657 '
publication_status: published
publisher: Hindawi Publ.
status: public
title: Algorithms for Hardware-Based Pattern Recognition
type: journal_article
user_id: '15514'
volume: 12
year: 2004
...