---
_id: '13703'
abstract:
- lang: eng
text: Mostly in the furniture industry the quality approach is anecdotical. A sys-tematic
convergence of specifications for claims of functions and design is missing. A
system has now been drafted or agreed in accordance with the aforementioned German
standards, which follows the Geometrical Product Specification (GPS, ISO 8015)
system and offers new possibilities for coding on technical drawings, as well
as in the downstream chain of standards for measuring, testing and process capability
analysis. DIN 919-2 as a new drafted German standard for technical drawing in
wood industry is opening up the whole tool set of GPS coding elements. DIN 68100
is adding a geomet-rical tolerance system including swelling or shrinkage. DIN68100-2
will pro-pose statistical tolerancing to convolute variances in geometry caused
e.g. by production with distributions in moisture con- tent or shrinkage coefficients.
VDI 3414 is offering specifications and corresponding verifications for at-tributive
quality characteristics of wooden surfaces including a naming and coding system.
Finally VDI 3415-2 is referring to measuring and production capability analysis
esp. for the wood industry and related research. As far as possible the German
standardization activities will be presented in the paper. The selected use case
will be the edge banding and profile wrapping where the new guideline VDI 3412
will assist the practitioners and scientists concern-ing specification, verification
but as well in trouble shooting.
author:
- first_name: Adrian
full_name: Riegel, Adrian
id: '14647'
last_name: Riegel
- first_name: Christian
full_name: Kortüm, Christian
id: '43995'
last_name: Kortüm
- first_name: Frieder
full_name: Scholz, Frieder
last_name: Scholz
- first_name: Karsten
full_name: Binninger, Karsten
last_name: Binninger
citation:
ama: Riegel A, Kortüm C, Scholz F, Binninger K. Systematic and Comprehesive Quality
Specification and Verfication for Furniture Industry - DIN 919, DIN 68100, VDI
3414, VDI 3415. Vol 26. (Goli G, Sandak J, Schajer G, Zanetti M, Bounamici
F, Springer Verlag GmbH, eds.). Springer Verlag GmbH; 2026:100-103.
apa: 'Riegel, A., Kortüm, C., Scholz, F., & Binninger, K. (2026). Systematic
and comprehesive quality specification and verfication for furniture industry
- DIN 919, DIN 68100, VDI 3414, VDI 3415. In G. Goli, J. Sandak, G. Schajer, M.
Zanetti, F. Bounamici, & Springer Verlag GmbH (Eds.), Advances in Wood
Machining : Selected Chapters from the 26th International Wood Machining Seminar
(IWMS26) (Vol. 26, pp. 100–103). Springer Verlag GmbH.'
bjps: 'Riegel A et al. (2026) Systematic and Comprehesive Quality
Specification and Verfication for Furniture Industry - DIN 919, DIN 68100, VDI
3414, VDI 3415, Goli G et al. (eds). Heidelberg: Springer Verlag GmbH.'
chicago: 'Riegel, Adrian, Christian Kortüm, Frieder Scholz, and Karsten Binninger.
Systematic and Comprehesive Quality Specification and Verfication for Furniture
Industry - DIN 919, DIN 68100, VDI 3414, VDI 3415. Edited by Giacomo Goli,
Jakub Sandak, Gary Schajer, Michaela Zanetti, Fransesco Bounamici, and Springer
Verlag GmbH. Advances in Wood Machining : Selected Chapters from the 26th International
Wood Machining Seminar (IWMS26) . Vol. 26. Proceedings International Wood
Machining Seminar. Heidelberg: Springer Verlag GmbH, 2026.'
chicago-de: 'Riegel, Adrian, Christian Kortüm, Frieder Scholz und Karsten Binninger.
2026. Systematic and comprehesive quality specification and verfication for
furniture industry - DIN 919, DIN 68100, VDI 3414, VDI 3415. Hg. von Giacomo
Goli, Jakub Sandak, Gary Schajer, Michaela Zanetti, Fransesco Bounamici, und Springer
Verlag GmbH. Advances in Wood Machining : Selected Chapters from the 26th International
Wood Machining Seminar (IWMS26) . Bd. 26. Proceedings International Wood Machining
Seminar. Heidelberg: Springer Verlag GmbH.'
din1505-2-1: 'Riegel, Adrian ; Kortüm, Christian ; Scholz,
Frieder ; Binninger, Karsten
; Goli, G. ; Sandak,
J. ; Schajer, G. ; Zanetti, M. ; Bounamici,
F. ; Springer Verlag GmbH
(Hrsg.): Systematic and comprehesive quality specification and verfication
for furniture industry - DIN 919, DIN 68100, VDI 3414, VDI 3415, Proceedings
International Wood Machining Seminar. Bd. 26. Heidelberg : Springer Verlag
GmbH, 2026'
havard: A. Riegel, C. Kortüm, F. Scholz, K. Binninger, Systematic and comprehesive
quality specification and verfication for furniture industry - DIN 919, DIN 68100,
VDI 3414, VDI 3415, Springer Verlag GmbH, Heidelberg, 2026.
ieee: 'A. Riegel, C. Kortüm, F. Scholz, and K. Binninger, Systematic and comprehesive
quality specification and verfication for furniture industry - DIN 919, DIN 68100,
VDI 3414, VDI 3415, vol. 26. Heidelberg: Springer Verlag GmbH, 2026, pp. 100–103.'
mla: 'Riegel, Adrian, et al. “Systematic and Comprehesive Quality Specification
and Verfication for Furniture Industry - DIN 919, DIN 68100, VDI 3414, VDI 3415.”
Advances in Wood Machining : Selected Chapters from the 26th International
Wood Machining Seminar (IWMS26) , edited by Giacomo Goli et al., vol. 26,
Springer Verlag GmbH, 2026, pp. 100–03.'
short: A. Riegel, C. Kortüm, F. Scholz, K. Binninger, Systematic and Comprehesive
Quality Specification and Verfication for Furniture Industry - DIN 919, DIN 68100,
VDI 3414, VDI 3415, Springer Verlag GmbH, Heidelberg, 2026.
ufg: 'Riegel, Adrian u. a.: Systematic and comprehesive quality specification
and verfication for furniture industry - DIN 919, DIN 68100, VDI 3414, VDI 3415,
Bd. 26, hg. von Goli, Giacomo u. a., Heidelberg 2026 (Proceedings International
Wood Machining Seminar).'
van: 'Riegel A, Kortüm C, Scholz F, Binninger K. Systematic and comprehesive quality
specification and verfication for furniture industry - DIN 919, DIN 68100, VDI
3414, VDI 3415. Goli G, Sandak J, Schajer G, Zanetti M, Bounamici F, Springer
Verlag GmbH, editors. Advances in Wood Machining : Selected Chapters from the
26th International Wood Machining Seminar (IWMS26) . Heidelberg: Springer Verlag
GmbH; 2026. (Proceedings International Wood Machining Seminar; vol. 26).'
conference:
end_date: 2025-04-15
location: Florenz
name: 26th International Wood Machining Seminar (IWMS26)
start_date: 2025-04-14
corporate_editor:
- Springer Verlag GmbH
date_created: 2026-04-22T10:22:59Z
date_updated: 2026-04-23T06:51:32Z
ddc:
- '620'
department:
- _id: DEP7019
editor:
- first_name: Giacomo
full_name: Goli, Giacomo
last_name: Goli
- first_name: Jakub
full_name: Sandak, Jakub
last_name: Sandak
- first_name: Gary
full_name: Schajer, Gary
last_name: Schajer
- first_name: Michaela
full_name: Zanetti, Michaela
last_name: Zanetti
- first_name: Fransesco
full_name: Bounamici, Fransesco
last_name: Bounamici
has_accepted_license: '1'
intvolume: ' 26'
jel:
- L64
keyword:
- technical drawing
- geometrical product specification and verifica-tion GPS
- process capability
- standards and guidelines
- edge banding
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.iufro.org/media/fileadmin/publications/proceedings-archive/50000-50400-50408-iwms26-firenze25-proceedings.pdf
oa: '1'
page: 100-103
place: Heidelberg
publication: 'Advances in Wood Machining : Selected Chapters from the 26th International
Wood Machining Seminar (IWMS26) '
publication_identifier:
isbn:
- ' 978-3032173089'
publication_status: published
publisher: Springer Verlag GmbH
quality_controlled: '1'
series_title: Proceedings International Wood Machining Seminar
status: public
title: Systematic and comprehesive quality specification and verfication for furniture
industry - DIN 919, DIN 68100, VDI 3414, VDI 3415
type: conference_editor_article
user_id: '83781'
volume: 26
year: '2026'
...
---
_id: '550'
abstract:
- lang: eng
text: Additive Manufacturing (AM) technologies are increasingly used for final part
production. Especially technologies for processing of metal, like Selective LaserMelting
(SLM), arefocusedin this area. The shift from prototyping towards final part
production results in enhanced requirements for repeatability and predictability
of the part quality. Machine manufacturers offer process monitoring solutions
for different aspects of the production process, like the powder bed surface,
the melt pool, and the laser energy. Nevertheless, the significance of these systems
is not fully proven and threshold values for the monitored process parameters
have to be determined for each product individually. This impedes the development
of suitable process control systems. The paper gives an overview ofexistingresearch
approaches and available process monitoring systems for SLM and their applicability
for predicting certain part characteristics. The existing solutions are evaluated
based on own research results. Next, AM specific difficulties for the development
of process control tools and possible solutions are discussed.
author:
- first_name: Andrea
full_name: Huxol, Andrea
id: '43559'
last_name: Huxol
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
id: '14290'
last_name: Villmer
citation:
ama: 'Huxol A, Villmer F-J. Process Control for Selective Laser Melting - Opprtunities
and Limitations. In: Villmer F-J, Padoano E, Department of Production Engineering
and Management, eds. Production Engineering and Management. Lemgo; 2018:17-28.'
apa: Huxol, A., & Villmer, F.-J. (2018). Process Control for Selective Laser
Melting - Opprtunities and Limitations. In F.-J. Villmer, E. Padoano, & Department
of Production Engineering and Management (Eds.), Production Engineering and
Management (pp. 17–28). Lemgo.
bjps: Huxol A and Villmer F-J (2018) Process Control for Selective Laser
Melting - Opprtunities and Limitations. In Villmer F-J, Padoano E and Department
of Production Engineering and Management (eds), Production Engineering and
Management. Lemgo, pp. 17–28.
chicago: Huxol, Andrea, and Franz-Josef Villmer. “Process Control for Selective
Laser Melting - Opprtunities and Limitations.” In Production Engineering and
Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of
Production Engineering and Management, 17–28. Lemgo, 2018.
chicago-de: 'Huxol, Andrea und Franz-Josef Villmer. 2018. Process Control for Selective
Laser Melting - Opprtunities and Limitations. In: Production Engineering and
Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production
Engineering and Management, 17–28. Lemgo.'
din1505-2-1: 'Huxol, Andrea ; Villmer, Franz-Josef: Process Control
for Selective Laser Melting - Opprtunities and Limitations. In: Villmer,
F.-J. ; Padoano, E. ; Department of Production Engineering and Management
(Hrsg.): Production Engineering and Management. Lemgo, 2018, S. 17–28'
havard: 'A. Huxol, F.-J. Villmer, Process Control for Selective Laser Melting -
Opprtunities and Limitations, in: F.-J. Villmer, E. Padoano, Department of Production
Engineering and Management (Eds.), Production Engineering and Management, Lemgo,
2018: pp. 17–28.'
ieee: A. Huxol and F.-J. Villmer, “Process Control for Selective Laser Melting -
Opprtunities and Limitations,” in Production Engineering and Management,
Lemgo, 2018, no. 1, pp. 17–28.
mla: Huxol, Andrea, and Franz-Josef Villmer. “Process Control for Selective Laser
Melting - Opprtunities and Limitations.” Production Engineering and Management,
edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 17–28.
short: 'A. Huxol, F.-J. Villmer, in: F.-J. Villmer, E. Padoano, Department of Production
Engineering and Management (Eds.), Production Engineering and Management, Lemgo,
2018, pp. 17–28.'
ufg: 'Huxol, Andrea/Villmer, Franz-Josef (2018): Process Control for Selective
Laser Melting - Opprtunities and Limitations, in: Franz-Josef Villmer et. al.
(Hgg.): Production Engineering and Management, Lemgo, S. 17–28.'
van: 'Huxol A, Villmer F-J. Process Control for Selective Laser Melting - Opprtunities
and Limitations. In: Villmer F-J, Padoano E, Department of Production Engineering
and Management, editors. Production Engineering and Management. Lemgo; 2018. p.
17–28.'
conference:
end_date: 2018-10-05
location: Lemgo
name: Proceedings 8th International Conference
start_date: 2018-10-04
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-13T13:55:29Z
date_updated: 2023-03-15T13:50:00Z
department:
- _id: DEP1306
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
issue: '1'
keyword:
- Additive manufacturing
- Process capability
- Process monitoring
- Quality assurance
- Final part production
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf
oa: '1'
page: 17-28
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-946856-03-0
publication_status: published
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf
status: public
title: Process Control for Selective Laser Melting - Opprtunities and Limitations
type: conference
user_id: '45673'
year: 2018
...
---
_id: '577'
abstract:
- lang: eng
text: A rising number of product variants together with decreasing lot sizes are
a result of the trend of individualization. Besides the upcoming organizational
issues, changes in the production technologies are required. Direct digital manufacturing
contributes to solve this problem by enabling the production of parts right from
the CAD data.Process capability analysis is applied in several industries to prove
the reliable compliance of products with quality requirements. As it is based
on statistical methods, new challenges arise in the context of single-part production.The
paper describes and compares different approaches for the adoption of process
capability analysis for single-part production with special focus on additive
manufacturing technologies. The statistical background and the applicability of
different capability parameters are discussed. An overview of existing research
work is given and supplemented by own approaches for the adoption of statistical
methods for single-part production. The aim of the research work is to establish
a first approach for the qualification of new technologies in single-part production.
author:
- first_name: Andrea
full_name: Huxol, Andrea
id: '43559'
last_name: Huxol
- first_name: Andrea
full_name: Davis, Andrea
id: '68611'
last_name: Davis
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
id: '14290'
last_name: Villmer
- first_name: Eva
full_name: Scheideler, Eva
id: '61522'
last_name: Scheideler
citation:
ama: 'Huxol A, Davis A, Villmer F-J, Scheideler E. Deployment of Process Capability
Analysis for Single-Part Production. In: Padoano E, Villmer F-J, Department of
Production Engineering and Management, eds. Production Engineering and Management.
Publication series in direct digital manufacturing . Lemgo; 2017:63-74.'
apa: Huxol, A., Davis, A., Villmer, F.-J., & Scheideler, E. (2017). Deployment
of Process Capability Analysis for Single-Part Production. In E. Padoano, F.-J.
Villmer, & Department of Production Engineering and Management (Eds.), Production
Engineering and Management (pp. 63–74). Lemgo.
bjps: Huxol A et al. (2017) Deployment of Process Capability Analysis
for Single-Part Production. In Padoano E, Villmer F-J and Department of Production
Engineering and Management (eds), Production Engineering and Management.
Lemgo, pp. 63–74.
chicago: Huxol, Andrea, Andrea Davis, Franz-Josef Villmer, and Eva Scheideler. “Deployment
of Process Capability Analysis for Single-Part Production.” In Production Engineering
and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department
of Production Engineering and Management, 63–74. Publication Series in Direct
Digital Manufacturing . Lemgo, 2017.
chicago-de: 'Huxol, Andrea, Andrea Davis, Franz-Josef Villmer und Eva Scheideler.
2017. Deployment of Process Capability Analysis for Single-Part Production. In:
Production Engineering and Management, hg. von Elio Padoano, Franz-Josef
Villmer, und Department of Production Engineering and Management, 63–74. Publication
series in direct digital manufacturing . Lemgo.'
din1505-2-1: 'Huxol, Andrea ; Davis, Andrea ; Villmer,
Franz-Josef ; Scheideler, Eva:
Deployment of Process Capability Analysis for Single-Part Production. In: Padoano, E. ; Villmer,
F.-J. ; Department of Production
Engineering and Management (Hrsg.): Production Engineering and Management,
Publication series in direct digital manufacturing . Lemgo, 2017, S. 63–74'
havard: 'A. Huxol, A. Davis, F.-J. Villmer, E. Scheideler, Deployment of Process
Capability Analysis for Single-Part Production, in: E. Padoano, F.-J. Villmer,
Department of Production Engineering and Management (Eds.), Production Engineering
and Management, Lemgo, 2017: pp. 63–74.'
ieee: A. Huxol, A. Davis, F.-J. Villmer, and E. Scheideler, “Deployment of Process
Capability Analysis for Single-Part Production,” in Production Engineering
and Management, Pordenone, Italy, 2017, no. 1, pp. 63–74.
mla: Huxol, Andrea, et al. “Deployment of Process Capability Analysis for Single-Part
Production.” Production Engineering and Management, edited by Elio Padoano
et al., no. 1, 2017, pp. 63–74.
short: 'A. Huxol, A. Davis, F.-J. Villmer, E. Scheideler, in: E. Padoano, F.-J.
Villmer, Department of Production Engineering and Management (Eds.), Production
Engineering and Management, Lemgo, 2017, pp. 63–74.'
ufg: 'Huxol, Andrea et. al. (2017): Deployment of Process Capability Analysis
for Single-Part Production, in: Elio Padoano et. al. (Hgg.): Production Engineering
and Management (=Publication series in direct digital manufacturing ),
Lemgo, S. 63–74.'
van: 'Huxol A, Davis A, Villmer F-J, Scheideler E. Deployment of Process Capability
Analysis for Single-Part Production. In: Padoano E, Villmer F-J, Department of
Production Engineering and Management, editors. Production Engineering and Management.
Lemgo; 2017. p. 63–74. (Publication series in direct digital manufacturing ).'
conference:
end_date: 2017-09-29
location: Pordenone, Italy
name: Proceedings7th International Conference
start_date: 2017-09-28
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-18T11:16:07Z
date_updated: 2023-03-15T13:50:01Z
department:
- _id: DEP1306
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
issue: '1'
keyword:
- Statistical process control
- Process capability analysis
- Single-part production
- Process optimization
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf
oa: '1'
page: 63-74
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-946856-01-6
publication_status: published
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf
series_title: 'Publication series in direct digital manufacturing '
status: public
title: Deployment of Process Capability Analysis for Single-Part Production
type: conference
user_id: '45673'
year: 2017
...