---
_id: '265'
abstract:
- lang: eng
text: The maintenance of a tool for injection molding or forming is usually accompanied
by its disassembly and assembly. The duration of the assembly activities is often
a large part of the total activity time for the maintenance of the tool. The degree
of performance of the employees in the execution of these disassembly and assembly
activities is often low. In addition, allowances occur (e.g. searching for work
equipment). At the Industrial Engineering Lab of the Ostwestfalen-Lippe University
of Applied Sciences, a prototype of an assistance system was developed to support
the assembly activities in toolmaking. With the help of this system, the operator
is guided step by step through the assembly process. The economic potential of
the system exists in the reduction of training times, the avoidance of assembly
errors and the increase of labor productivity.
author:
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Daniel
full_name: Riediger, Daniel
id: '52263'
last_name: Riediger
- first_name: Alexander
full_name: Unrau, Alexander
id: '64690'
last_name: Unrau
citation:
ama: 'Hinrichsen S, Riediger D, Unrau A. Development of a Projection-Based Assistance
System for Maintaining Injection Molding Tools. In: IEEE/ IEEM, ed. 2017 IEEE
International Conference on Industrial Engineering and Engineering Management
(IEEM). Danvers; 2017:1571-1575. doi:https://doi.org/10.1109/IEEM.2017.8290157'
apa: Hinrichsen, S., Riediger, D., & Unrau, A. (2017). Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools. In IEEE/ IEEM (Ed.),
2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM) (pp. 1571–1575). Danvers. https://doi.org/10.1109/IEEM.2017.8290157
bjps: Hinrichsen S, Riediger D and Unrau A (2017) Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools. In IEEE/ IEEM (ed.),
2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM). Danvers, pp. 1571–1575.
chicago: Hinrichsen, Sven, Daniel Riediger, and Alexander Unrau. “Development of
a Projection-Based Assistance System for Maintaining Injection Molding Tools.”
In 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM), edited by IEEE/ IEEM, 1571–75. Danvers, 2017. https://doi.org/10.1109/IEEM.2017.8290157.
chicago-de: 'Hinrichsen, Sven, Daniel Riediger und Alexander Unrau. 2017. Development
of a Projection-Based Assistance System for Maintaining Injection Molding Tools.
In: 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM), hg. von IEEE/ IEEM, 1571–1575. Danvers. doi:https://doi.org/10.1109/IEEM.2017.8290157,
.'
din1505-2-1: 'Hinrichsen, Sven ; Riediger, Daniel ; Unrau,
Alexander: Development of a Projection-Based Assistance System for Maintaining
Injection Molding Tools. In: IEEE/ IEEM
(Hrsg.): 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM). Danvers, 2017, S. 1571–1575'
havard: 'S. Hinrichsen, D. Riediger, A. Unrau, Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools, in: IEEE/ IEEM (Ed.),
2017 IEEE International Conference on Industrial Engineering and Engineering Management
(IEEM), Danvers, 2017: pp. 1571–1575.'
ieee: S. Hinrichsen, D. Riediger, and A. Unrau, “Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools,” in 2017 IEEE International
Conference on Industrial Engineering and Engineering Management (IEEM), Singapore,
2017, no. 1, pp. 1571–1575.
mla: Hinrichsen, Sven, et al. “Development of a Projection-Based Assistance System
for Maintaining Injection Molding Tools.” 2017 IEEE International Conference
on Industrial Engineering and Engineering Management (IEEM), edited by IEEE/
IEEM, no. 1, 2017, pp. 1571–75, doi:https://doi.org/10.1109/IEEM.2017.8290157.
short: 'S. Hinrichsen, D. Riediger, A. Unrau, in: IEEE/ IEEM (Ed.), 2017 IEEE International
Conference on Industrial Engineering and Engineering Management (IEEM), Danvers,
2017, pp. 1571–1575.'
ufg: 'Hinrichsen, Sven et. al. (2017): Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools, in: IEEE/ IEEM (Hg.):
2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM), Danvers, S. 1571–1575.'
van: 'Hinrichsen S, Riediger D, Unrau A. Development of a Projection-Based Assistance
System for Maintaining Injection Molding Tools. In: IEEE/ IEEM, editor. 2017 IEEE
International Conference on Industrial Engineering and Engineering Management
(IEEM). Danvers; 2017. p. 1571–5.'
conference:
end_date: 2017-12-13
location: Singapore
name: 'IEEE International Conference on Industrial Engineering and Engineering Management '
start_date: 2017-12-10
corporate_editor:
- IEEE/ IEEM
date_created: 2018-11-26T11:59:27Z
date_updated: 2023-03-15T13:49:41Z
ddc:
- '620'
department:
- _id: DEP7020
- _id: DEP1305
doi: https://doi.org/10.1109/IEEM.2017.8290157
issue: '1'
keyword:
- injection moulding
- machine tools
- maintenance engineering
- productivity
- projection-based assistance system
- injection molding tools
- assembly activities
- assembly process
- assembly errors
- tool maintenance
- disassembly activities
- economic potential
- Industrial Engineering Lab
- Ostwestfalen-Lippe University of Applied Sciences
- toolmaking
- Tools
- Injection molding
- Maintenance engineering
- Usability
- Task analysis
- Workstations
- Morphology
- assembly assistance systems
- assistance systems
- maintenance of injection molding tools
- manual assembly
language:
- iso: eng
page: 1571-1575
place: Danvers
publication: 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM)
publication_identifier:
isbn:
- '978-1-5386-0948-4 '
quality_controlled: '1'
status: public
title: Development of a Projection-Based Assistance System for Maintaining Injection
Molding Tools
type: conference
user_id: '74004'
year: 2017
...
---
_id: '574'
abstract:
- lang: eng
text: The increasing industrial digitization is the driver for the fast emergence
of many industrial smart products. To stay competitive, the manufacturing companies
of these smart products need to optimize their internal lifecycleprocesses. Mainly,
they have to converge the software and hardware lifecycleprocesses. However, even
if this strategic necessity has been recognized, manufacturing companies struggle
to develop and implement a roadmap of such convergence.Starting point for the
realization of harmonized lifecycle processes are processmodels describing process
activities and the underlying data models. This research addresses the latter
one and aims to create a generic lifecycle data model. The research team created
and evaluated such data model referring to development artifacts such as requirements,
parts or test cases and to lifecycle artifacts such as revisions, versions and
baselines. The generic lifecycle management model was evaluated by a practical
development of a smart product. By this, the research provides a valuable result
to maintain and increase the competitiveness of manufacturing companies.
author:
- first_name: Andreas
full_name: Deuter, Andreas
id: '62088'
last_name: Deuter
- first_name: Andreas
full_name: Otte, Andreas
id: '51466'
last_name: Otte
- first_name: Marcel
full_name: Ebert, Marcel
id: '52288'
last_name: Ebert
citation:
ama: 'Deuter A, Otte A, Ebert M. Extending the Sliced V-Model to Smart Product Development.
In: Padoano E, Villmer F-J, Department of Production Engineering and Management,
eds. Production Engineering and Management. Lemgo; 2017:115-125.'
apa: Deuter, A., Otte, A., & Ebert, M. (2017). Extending the Sliced V-Model
to Smart Product Development. In E. Padoano, F.-J. Villmer, & Department of
Production Engineering and Management (Eds.), Production Engineering and Management
(pp. 115–125). Lemgo.
bjps: Deuter A, Otte A and Ebert M (2017) Extending the Sliced V-Model to
Smart Product Development. In Padoano E, Villmer F-J and Department of Production
Engineering and Management (eds), Production Engineering and Management.
Lemgo, pp. 115–125.
chicago: Deuter, Andreas, Andreas Otte, and Marcel Ebert. “Extending the Sliced
V-Model to Smart Product Development.” In Production Engineering and Management,
edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering
and Management, 115–25. Lemgo, 2017.
chicago-de: 'Deuter, Andreas, Andreas Otte und Marcel Ebert. 2017. Extending the
Sliced V-Model to Smart Product Development. In: Production Engineering and
Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production
Engineering and Management, 115–125. Lemgo.'
din1505-2-1: 'Deuter, Andreas ; Otte, Andreas ; Ebert,
Marcel: Extending the Sliced V-Model to Smart Product Development. In:
Padoano, E. ; Villmer,
F.-J. ; Department of Production
Engineering and Management (Hrsg.): Production Engineering and Management.
Lemgo, 2017, S. 115–125'
havard: 'A. Deuter, A. Otte, M. Ebert, Extending the Sliced V-Model to Smart Product
Development, in: E. Padoano, F.-J. Villmer, Department of Production Engineering
and Management (Eds.), Production Engineering and Management, Lemgo, 2017: pp.
115–125.'
ieee: A. Deuter, A. Otte, and M. Ebert, “Extending the Sliced V-Model to Smart Product
Development,” in Production Engineering and Management, Pordenone, Italy,
2017, no. 1, pp. 115–125.
mla: Deuter, Andreas, et al. “Extending the Sliced V-Model to Smart Product Development.”
Production Engineering and Management, edited by Elio Padoano et al., no.
1, 2017, pp. 115–25.
short: 'A. Deuter, A. Otte, M. Ebert, in: E. Padoano, F.-J. Villmer, Department
of Production Engineering and Management (Eds.), Production Engineering and Management,
Lemgo, 2017, pp. 115–125.'
ufg: 'Deuter, Andreas et. al. (2017): Extending the Sliced V-Model to Smart
Product Development, in: Elio Padoano et. al. (Hgg.): Production Engineering
and Management, Lemgo, S. 115–125.'
van: 'Deuter A, Otte A, Ebert M. Extending the Sliced V-Model to Smart Product Development.
In: Padoano E, Villmer F-J, Department of Production Engineering and Management,
editors. Production Engineering and Management. Lemgo; 2017. p. 115–25.'
conference:
end_date: 2017-09-29
location: Pordenone, Italy
name: Proceedings 7th International Conference
start_date: 2017-09-28
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-18T11:34:36Z
date_updated: 2023-03-15T13:50:01Z
department:
- _id: DEP1306
- _id: DEP7022
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
issue: '1'
keyword:
- PLM
- ALM
- Systems Engineering
- VDI guideline 2206
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf
oa: '1'
page: 115-125
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-946856-01-6
publication_status: published
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf
status: public
title: Extending the Sliced V-Model to Smart Product Development
type: conference
user_id: '62088'
year: 2017
...
---
_id: '587'
abstract:
- lang: eng
text: Development engineers are most valued for their excellence in physical product
development, but on the flipside, project managers face problems when trying to
fit them into effectively running development processes. Because of the advantages
of Lean Management in production (Lean Production), process managers often try
to transfer lean principles directly to development processes, not considering
that major differences exist between well-described production processes and new
product development processes which include much more uncertainty and risk. Nevertheless,
several lean principals are applicable in product development. This paper describes
five lean development insights (LDIs) which were found when optimizing an entire
product realization process. Lean principles have been examined and then translated
to collaboration between product development and tool manufacturing at a globally
operating German family-run company. These LDIs are meant to help project and
process managers, consultants and developers to rethink their ways of organizing
product development. The application of these insights will result in increased
transparency, intensified collaboration, improved processes and quality, shortened
lead times, and also eliminate waste.
author:
- first_name: M.
full_name: Riediger, M.
last_name: Riediger
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
id: '14290'
last_name: Villmer
citation:
ama: 'Riediger M, Villmer F-J. Five Insights in Effectively Managing Product Development.
In: Villmer F-J, Padoano E, Department of Production Engineering and Management,
eds. Production Engineering and Management. Lemgo; 2016:111-122.'
apa: Riediger, M., & Villmer, F.-J. (2016). Five Insights in Effectively Managing
Product Development. In F.-J. Villmer, E. Padoano, & Department of Production
Engineering and Management (Eds.), Production Engineering and Management
(pp. 111–122). Lemgo.
bjps: Riediger M and Villmer F-J (2016) Five Insights in Effectively Managing
Product Development. In Villmer F-J, Padoano E and Department of Production Engineering
and Management (eds), Production Engineering and Management. Lemgo, pp.
111–122.
chicago: Riediger, M., and Franz-Josef Villmer. “Five Insights in Effectively Managing
Product Development.” In Production Engineering and Management, edited
by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering
and Management, 111–22. Lemgo, 2016.
chicago-de: 'Riediger, M. und Franz-Josef Villmer. 2016. Five Insights in Effectively
Managing Product Development. In: Production Engineering and Management,
hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering
and Management, 111–122. Lemgo.'
din1505-2-1: 'Riediger, M. ; Villmer, Franz-Josef: Five Insights in
Effectively Managing Product Development. In: Villmer,
F.-J. ; Padoano, E. ; Department of Production Engineering and Management
(Hrsg.): Production Engineering and Management. Lemgo, 2016, S. 111–122'
havard: 'M. Riediger, F.-J. Villmer, Five Insights in Effectively Managing Product
Development, in: F.-J. Villmer, E. Padoano, Department of Production Engineering
and Management (Eds.), Production Engineering and Management, Lemgo, 2016: pp.
111–122.'
ieee: M. Riediger and F.-J. Villmer, “Five Insights in Effectively Managing Product
Development,” in Production Engineering and Management, Lemgo, 2016, no.
1, pp. 111–122.
mla: Riediger, M., and Franz-Josef Villmer. “Five Insights in Effectively Managing
Product Development.” Production Engineering and Management, edited by
Franz-Josef Villmer et al., no. 1, 2016, pp. 111–22.
short: 'M. Riediger, F.-J. Villmer, in: F.-J. Villmer, E. Padoano, Department of
Production Engineering and Management (Eds.), Production Engineering and Management,
Lemgo, 2016, pp. 111–122.'
ufg: 'Riediger, M./Villmer, Franz-Josef (2016): Five Insights in Effectively
Managing Product Development, in: Franz-Josef Villmer et. al. (Hgg.): Production
Engineering and Management, Lemgo, S. 111–122.'
van: 'Riediger M, Villmer F-J. Five Insights in Effectively Managing Product Development.
In: Villmer F-J, Padoano E, Department of Production Engineering and Management,
editors. Production Engineering and Management. Lemgo; 2016. p. 111–22.'
conference:
end_date: 2016-09-30
location: Lemgo
name: Proceedings 6th International Conference
start_date: 2016-09-29
corporate_editor:
- Department of Production Engineering and Management
- Hochschule Ostwestfalen-Lippe
date_created: 2019-02-18T14:47:41Z
date_updated: 2023-03-15T13:50:02Z
department:
- _id: DEP7000
- _id: DEP1306
editor:
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
issue: '1'
keyword:
- Lean development
- Collaboration
- Agile
- PLM
- Frontloading
- Simultaneous engineering
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf
oa: '1'
page: 111-122
place: Lemgo
publication: Production Engineering and Management
publication_identifier:
isbn:
- 978-3-946856-00-9
publication_status: published
related_material:
link:
- relation: contains
url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf
status: public
title: Five Insights in Effectively Managing Product Development
type: conference
user_id: '45673'
year: 2016
...
---
_id: '4329'
abstract:
- lang: eng
text: The term Industrie 4.0 carries the vision of smart factories, which automatically
adapt to changes and assist the human as much as possible during operation and
maintenance. This includes smart human machine interfaces, which reduce the chances
of errors and help to make the right decisions. This paper presents an approach
to equip the maintenance software running on a tablet PC with augmented reality
functionality to be able to place virtual sticky notes at production modules.
Additionally, these sticky notes are enriched with position information. The central
element of this approach is an ontology-based context-aware framework, which aggregates
and processes data from different sources. As a result, a tablet PC application
was implemented, which allows displaying maintenance information as well as live
plant process data in the form of augmented reality. More than 100 of those sticky
notes can be placed using this system, whereas each note requires a file size
of 12 to 16 kilo bytes. After placing a sticky note, the system recognizes it
even if the camera's position is not exactly the same as during the placing process.
author:
- first_name: Holger
full_name: Flatt, Holger
id: '58494'
last_name: Flatt
- first_name: Nils
full_name: Koch, Nils
last_name: Koch
- first_name: Andrei
full_name: Guenter, Andrei
last_name: Guenter
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
- first_name: Jürgen
full_name: Jasperneite, Jürgen
id: '1899'
last_name: Jasperneite
citation:
ama: 'Flatt H, Koch N, Guenter A, Röcker C, Jasperneite J. A Context-Aware Assistance
System for Maintenance Applications in Smart Factories based on Augmented Reality
and Indoor Localization. In: 2015 IEEE 20th Conference on Emerging Technologies
& Factory Automation (ETFA). New York: IEEE; 2015. doi:10.1109/ETFA.2015.7301586'
apa: 'Flatt, H., Koch, N., Guenter, A., Röcker, C., & Jasperneite, J. (2015).
A Context-Aware Assistance System for Maintenance Applications in Smart Factories
based on Augmented Reality and Indoor Localization. In 2015 IEEE 20th Conference
on Emerging Technologies & Factory Automation (ETFA). New York: IEEE.
https://doi.org/10.1109/ETFA.2015.7301586'
bjps: 'Flatt H et al. (2015) A Context-Aware Assistance System for
Maintenance Applications in Smart Factories Based on Augmented Reality and Indoor
Localization. 2015 IEEE 20th Conference on Emerging Technologies & Factory
Automation (ETFA). New York: IEEE.'
chicago: 'Flatt, Holger, Nils Koch, Andrei Guenter, Carsten Röcker, and Jürgen Jasperneite.
“A Context-Aware Assistance System for Maintenance Applications in Smart Factories
Based on Augmented Reality and Indoor Localization.” In 2015 IEEE 20th Conference
on Emerging Technologies & Factory Automation (ETFA). New York: IEEE,
2015. https://doi.org/10.1109/ETFA.2015.7301586.'
chicago-de: 'Flatt, Holger, Nils Koch, Andrei Guenter, Carsten Röcker und Jürgen
Jasperneite. 2015. A Context-Aware Assistance System for Maintenance Applications
in Smart Factories based on Augmented Reality and Indoor Localization. In:
2015 IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA).
New York: IEEE. doi:10.1109/ETFA.2015.7301586,
.'
din1505-2-1: 'Flatt, Holger ; Koch, Nils ; Guenter,
Andrei ; Röcker, Carsten
; Jasperneite, Jürgen: A Context-Aware
Assistance System for Maintenance Applications in Smart Factories based on Augmented
Reality and Indoor Localization. In: 2015 IEEE 20th Conference on Emerging
Technologies & Factory Automation (ETFA). New York : IEEE, 2015'
havard: 'H. Flatt, N. Koch, A. Guenter, C. Röcker, J. Jasperneite, A Context-Aware
Assistance System for Maintenance Applications in Smart Factories based on Augmented
Reality and Indoor Localization, in: 2015 IEEE 20th Conference on Emerging Technologies
& Factory Automation (ETFA), IEEE, New York, 2015.'
ieee: H. Flatt, N. Koch, A. Guenter, C. Röcker, and J. Jasperneite, “A Context-Aware
Assistance System for Maintenance Applications in Smart Factories based on Augmented
Reality and Indoor Localization,” in 2015 IEEE 20th Conference on Emerging
Technologies & Factory Automation (ETFA), Luxembourg, Luxembourg, 2015.
mla: Flatt, Holger, et al. “A Context-Aware Assistance System for Maintenance Applications
in Smart Factories Based on Augmented Reality and Indoor Localization.” 2015
IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA),
IEEE, 2015, doi:10.1109/ETFA.2015.7301586.
short: 'H. Flatt, N. Koch, A. Guenter, C. Röcker, J. Jasperneite, in: 2015 IEEE
20th Conference on Emerging Technologies & Factory Automation (ETFA), IEEE,
New York, 2015.'
ufg: 'Flatt, Holger et. al. (2015): A Context-Aware Assistance System for
Maintenance Applications in Smart Factories based on Augmented Reality and Indoor
Localization, in: 2015 IEEE 20th Conference on Emerging Technologies &
Factory Automation (ETFA), New York.'
van: 'Flatt H, Koch N, Guenter A, Röcker C, Jasperneite J. A Context-Aware Assistance
System for Maintenance Applications in Smart Factories based on Augmented Reality
and Indoor Localization. In: 2015 IEEE 20th Conference on Emerging Technologies
& Factory Automation (ETFA). New York: IEEE; 2015.'
conference:
end_date: 2015-09-11
location: Luxembourg, Luxembourg
name: 20th Conference on Emerging Technologies & Factory Automation (ETFA)
start_date: 2015-09-08
date_created: 2021-01-08T12:03:42Z
date_updated: 2023-03-15T13:49:52Z
department:
- _id: DEP5023
doi: 10.1109/ETFA.2015.7301586
keyword:
- Maintenance engineering
- Augmented reality
- Context
- Context modelin
- Production facilities
- Cameras
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
place: New York
publication: ' 2015 IEEE 20th Conference on Emerging Technologies & Factory Automation
(ETFA)'
publication_status: published
publisher: IEEE
status: public
title: A Context-Aware Assistance System for Maintenance Applications in Smart Factories
based on Augmented Reality and Indoor Localization
type: conference
user_id: '15514'
year: 2015
...
---
_id: '4492'
abstract:
- lang: eng
text: In most countries demographic developments tend towards more and more elderly
people in single households. Improving the quality of life for elderly people
is an emerging issue within our information society. Good user interfaces have
tremendous implications for appropriate accessibility. Though, user interfaces
should not only be easily accessible, they should also be useful, usable and most
of all enjoyable and a benefit for people. Traditionally, Human–Computer Interaction
(HCI) bridges Natural Sciences (Psychology) and Engineering (Informatics/Computer
Science), whilst Usability Engineering (UE) is anchored in Software Technology
and supports the actual implemen-tation. Together, HCI and UE have a powerful
potential to help towards making technology a little bit more accessible, useful,
useable and enjoyable for everybody.
author:
- first_name: Andreas
full_name: Holzinger, Andreas
last_name: Holzinger
- first_name: Martina
full_name: Ziefle, Martina
last_name: Ziefle
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Holzinger A, Ziefle M, Röcker C. Human-Computer Interaction and Usability
Engineering for Elderly (HCI4AGING): Introduction to the Special Thematic Session.
In: Miesenberger K, Klaus J, Zagler W, Karshmer A, eds. Computers Helping
People with Special Needs, Part II. Vol 6180. Lecture Notes in Computer Science.
Berlin: Springer; 2010:556-559. doi:10.1007/978-3-642-14100-3_83'
apa: 'Holzinger, A., Ziefle, M., & Röcker, C. (2010). Human-Computer Interaction
and Usability Engineering for Elderly (HCI4AGING): Introduction to the Special
Thematic Session. In K. Miesenberger, J. Klaus, W. Zagler, & A. Karshmer
(Eds.), Computers Helping People with Special Needs, Part II (Vol. 6180,
pp. 556–559). Berlin: Springer. https://doi.org/10.1007/978-3-642-14100-3_83'
bjps: 'Holzinger A, Ziefle M and Röcker C (2010) Human-Computer Interaction
and Usability Engineering for Elderly (HCI4AGING): Introduction to the Special
Thematic Session. In Miesenberger K et al. (eds), Computers Helping People
with Special Needs, Part II, vol. 6180. Berlin: Springer, pp. 556–559.'
chicago: 'Holzinger, Andreas, Martina Ziefle, and Carsten Röcker. “Human-Computer
Interaction and Usability Engineering for Elderly (HCI4AGING): Introduction to
the Special Thematic Session.” In Computers Helping People with Special Needs,
Part II, edited by K. Miesenberger, J. Klaus, W. Zagler, and A. Karshmer,
6180:556–59. Lecture Notes in Computer Science. Berlin: Springer, 2010. https://doi.org/10.1007/978-3-642-14100-3_83.'
chicago-de: 'Holzinger, Andreas, Martina Ziefle und Carsten Röcker. 2010. Human-Computer
Interaction and Usability Engineering for Elderly (HCI4AGING): Introduction to
the Special Thematic Session. In: Computers Helping People with Special Needs,
Part II, hg. von K. Miesenberger, J. Klaus, W. Zagler, und A. Karshmer, 6180:556–559.
Lecture Notes in Computer Science. Berlin: Springer. doi:10.1007/978-3-642-14100-3_83,
.'
din1505-2-1: 'Holzinger, Andreas ;
Ziefle, Martina ; Röcker,
Carsten: Human-Computer Interaction and Usability Engineering for Elderly
(HCI4AGING): Introduction to the Special Thematic Session. In:
Miesenberger, K. ; Klaus, J.
; Zagler, W. ; Karshmer,
A. (Hrsg.): Computers Helping People with Special Needs, Part II,
Lecture Notes in Computer Science. Bd. 6180. Berlin : Springer, 2010, S. 556–559'
havard: 'A. Holzinger, M. Ziefle, C. Röcker, Human-Computer Interaction and Usability
Engineering for Elderly (HCI4AGING): Introduction to the Special Thematic Session,
in: K. Miesenberger, J. Klaus, W. Zagler, A. Karshmer (Eds.), Computers Helping
People with Special Needs, Part II, Springer, Berlin, 2010: pp. 556–559.'
ieee: 'A. Holzinger, M. Ziefle, and C. Röcker, “Human-Computer Interaction and Usability
Engineering for Elderly (HCI4AGING): Introduction to the Special Thematic Session,”
in Computers Helping People with Special Needs, Part II, Vienna, Austria,
2010, vol. 6180, pp. 556–559.'
mla: 'Holzinger, Andreas, et al. “Human-Computer Interaction and Usability Engineering
for Elderly (HCI4AGING): Introduction to the Special Thematic Session.” Computers
Helping People with Special Needs, Part II, edited by K. Miesenberger et
al., vol. 6180, Springer, 2010, pp. 556–59, doi:10.1007/978-3-642-14100-3_83.'
short: 'A. Holzinger, M. Ziefle, C. Röcker, in: K. Miesenberger, J. Klaus, W. Zagler,
A. Karshmer (Eds.), Computers Helping People with Special Needs, Part II, Springer,
Berlin, 2010, pp. 556–559.'
ufg: 'Holzinger, Andreas et. al. (2010): Human-Computer Interaction and Usability
Engineering for Elderly (HCI4AGING): Introduction to the Special Thematic Session,
in: K. Miesenberger et. al. (Hgg.): Computers Helping People with Special
Needs, Part II (=Lecture Notes in Computer Science 6180), Berlin, S.
556–559.'
van: 'Holzinger A, Ziefle M, Röcker C. Human-Computer Interaction and Usability
Engineering for Elderly (HCI4AGING): Introduction to the Special Thematic Session.
In: Miesenberger K, Klaus J, Zagler W, Karshmer A, editors. Computers Helping
People with Special Needs, Part II. Berlin: Springer; 2010. p. 556–9. (Lecture
Notes in Computer Science; vol. 6180).'
conference:
end_date: 2010-07-16
location: Vienna, Austria
name: 12th International Conference, ICCHP 2010
start_date: 2010-07-14
date_created: 2021-01-21T09:21:23Z
date_updated: 2023-03-15T13:49:53Z
department:
- _id: DEP5023
doi: 10.1007/978-3-642-14100-3_83
editor:
- first_name: K.
full_name: ' Miesenberger, K.'
last_name: ' Miesenberger'
- first_name: J.
full_name: Klaus, J.
last_name: Klaus
- first_name: W.
full_name: Zagler, W.
last_name: Zagler
- first_name: A.
full_name: Karshmer, A.
last_name: Karshmer
extern: '1'
intvolume: ' 6180'
keyword:
- Human–Computer Interaction
- Usability Engineering
- User Interfaces
- Elderly People
- Older Adults
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 556-559
place: Berlin
publication: Computers Helping People with Special Needs, Part II
publication_identifier:
eisbn:
- 978-3-642-14100-3
isbn:
- 978-3-642-14099-0
publication_status: published
publisher: Springer
series_title: Lecture Notes in Computer Science
status: public
title: 'Human-Computer Interaction and Usability Engineering for Elderly (HCI4AGING):
Introduction to the Special Thematic Session'
type: conference
user_id: '15514'
volume: 6180
year: 2010
...
---
_id: '478'
author:
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
citation:
ama: 'Hinrichsen S. Arbeitsrationalisierung mittels Methoden des Industrial Engineering
in Dienstleistungsbetrieben. Vol 2. Aachen: Shaker Verlag; 2007.'
apa: 'Hinrichsen, S. (2007). Arbeitsrationalisierung mittels Methoden des Industrial
Engineering in Dienstleistungsbetrieben (Vol. 2). Aachen: Shaker Verlag.'
bjps: 'Hinrichsen S (2007) Arbeitsrationalisierung mittels Methoden des
Industrial Engineering in Dienstleistungsbetrieben. Aachen: Shaker Verlag.'
chicago: 'Hinrichsen, Sven. Arbeitsrationalisierung mittels Methoden des Industrial
Engineering in Dienstleistungsbetrieben. Vol. 2. Industrial Engineering and
Ergonomics. Aachen: Shaker Verlag, 2007.'
chicago-de: 'Hinrichsen, Sven. 2007. Arbeitsrationalisierung mittels Methoden
des Industrial Engineering in Dienstleistungsbetrieben. Bd. 2. Industrial
Engineering and Ergonomics. Aachen: Shaker Verlag.'
din1505-2-1: 'Hinrichsen, Sven: Arbeitsrationalisierung
mittels Methoden des Industrial Engineering in Dienstleistungsbetrieben, Industrial
Engineering and Ergonomics. Bd. 2. Aachen : Shaker Verlag, 2007'
havard: S. Hinrichsen, Arbeitsrationalisierung mittels Methoden des Industrial Engineering
in Dienstleistungsbetrieben, Shaker Verlag, Aachen, 2007.
ieee: 'S. Hinrichsen, Arbeitsrationalisierung mittels Methoden des Industrial
Engineering in Dienstleistungsbetrieben, vol. 2. Aachen: Shaker Verlag, 2007.'
mla: Hinrichsen, Sven. Arbeitsrationalisierung mittels Methoden des Industrial
Engineering in Dienstleistungsbetrieben. Vol. 2, Shaker Verlag, 2007.
short: S. Hinrichsen, Arbeitsrationalisierung mittels Methoden des Industrial Engineering
in Dienstleistungsbetrieben, Shaker Verlag, Aachen, 2007.
ufg: 'Hinrichsen, Sven (2007): Arbeitsrationalisierung mittels Methoden des
Industrial Engineering in Dienstleistungsbetrieben (=Industrial Engineering
and Ergonomics 2), Aachen.'
van: 'Hinrichsen S. Arbeitsrationalisierung mittels Methoden des Industrial Engineering
in Dienstleistungsbetrieben. Aachen: Shaker Verlag; 2007. IV, 240. (Industrial
Engineering and Ergonomics; vol. 2).'
date_created: 2019-01-29T14:25:57Z
date_updated: 2023-03-15T13:49:55Z
ddc:
- '380'
department:
- _id: DEP7020
extern: '1'
intvolume: ' 2'
keyword:
- Einzelhandelsbetrieb
- Dienstleistungsbetrieb
- Industrial Engineering
language:
- iso: ger
page: IV, 240
place: Aachen
publication_identifier:
isbn:
- '978-3-8322-6636-3 '
publication_status: published
publisher: Shaker Verlag
series_title: Industrial Engineering and Ergonomics
status: public
title: Arbeitsrationalisierung mittels Methoden des Industrial Engineering in Dienstleistungsbetrieben
type: book
user_id: '49010'
volume: 2
year: 2007
...
---
_id: '4815'
abstract:
- lang: eng
text: In this paper a concept is presented, that supports awareness and emotional
communication between family members, distributed over multiple intelligent home
environments. A technical communication infrastructure is presented, which allows
connecting different types of input and output devices. This platform is extended
by several examples of emotional user interfaces, which address the individual
needs of different user groups
author:
- first_name: Richard
full_name: Etter, Richard
last_name: Etter
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
- first_name: Daniel
full_name: Gilgen, Daniel
last_name: Gilgen
citation:
ama: 'Etter R, Röcker C, Gilgen D. Supporting Emotional Communication between Multiple
Users in Intelligent Home Environments. In: Proceedings of the Second International
Conference on Intelligent Environments (IE’06). London: IET; 2006:41-50. doi:10.1049/cp:20060623'
apa: 'Etter, R., Röcker, C., & Gilgen, D. (2006). Supporting Emotional Communication
between Multiple Users in Intelligent Home Environments. In Proceedings of
the Second International Conference on Intelligent Environments (IE’06) (pp.
41–50). London: IET. https://doi.org/10.1049/cp:20060623'
bjps: 'Etter R, Röcker C and Gilgen D (2006) Supporting Emotional Communication
between Multiple Users in Intelligent Home Environments. Proceedings of the
Second International Conference on Intelligent Environments (IE’06). London:
IET, pp. 41–50.'
chicago: 'Etter, Richard, Carsten Röcker, and Daniel Gilgen. “Supporting Emotional
Communication between Multiple Users in Intelligent Home Environments.” In Proceedings
of the Second International Conference on Intelligent Environments (IE’06),
41–50. London: IET, 2006. https://doi.org/10.1049/cp:20060623.'
chicago-de: 'Etter, Richard, Carsten Röcker und Daniel Gilgen. 2006. Supporting
Emotional Communication between Multiple Users in Intelligent Home Environments.
In: Proceedings of the Second International Conference on Intelligent Environments
(IE’06), 41–50. London: IET. doi:10.1049/cp:20060623,
.'
din1505-2-1: 'Etter, Richard ; Röcker, Carsten ; Gilgen,
Daniel: Supporting Emotional Communication between Multiple Users in Intelligent
Home Environments. In: Proceedings of the Second International Conference on
Intelligent Environments (IE’06). London : IET, 2006, S. 41–50'
havard: 'R. Etter, C. Röcker, D. Gilgen, Supporting Emotional Communication between
Multiple Users in Intelligent Home Environments, in: Proceedings of the Second
International Conference on Intelligent Environments (IE’06), IET, London, 2006:
pp. 41–50.'
ieee: R. Etter, C. Röcker, and D. Gilgen, “Supporting Emotional Communication between
Multiple Users in Intelligent Home Environments,” in Proceedings of the Second
International Conference on Intelligent Environments (IE’06), Athens, Greece,
2006, pp. 41–50.
mla: Etter, Richard, et al. “Supporting Emotional Communication between Multiple
Users in Intelligent Home Environments.” Proceedings of the Second International
Conference on Intelligent Environments (IE’06), IET, 2006, pp. 41–50, doi:10.1049/cp:20060623.
short: 'R. Etter, C. Röcker, D. Gilgen, in: Proceedings of the Second International
Conference on Intelligent Environments (IE’06), IET, London, 2006, pp. 41–50.'
ufg: 'Etter, Richard et. al. (2006): Supporting Emotional Communication between
Multiple Users in Intelligent Home Environments, in: Proceedings of the Second
International Conference on Intelligent Environments (IE’06), London, S. 41–50.'
van: 'Etter R, Röcker C, Gilgen D. Supporting Emotional Communication between Multiple
Users in Intelligent Home Environments. In: Proceedings of the Second International
Conference on Intelligent Environments (IE’06). London: IET; 2006. p. 41–50.'
conference:
end_date: 2006-07-06
location: Athens, Greece
name: 2nd IET International Conference on Intelligent Environments (IE 06)
start_date: 2006-05-07
date_created: 2021-02-02T09:59:30Z
date_updated: 2023-03-15T13:49:55Z
department:
- _id: DEP5023
doi: 10.1049/cp:20060623
extern: '1'
keyword:
- User interfaces
- Home computing
- Automated buildings
- Control engineering computing
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 41-50
place: London
publication: Proceedings of the Second International Conference on Intelligent Environments
(IE’06)
publication_identifier:
isbn:
- 978-0-86341-663-7
issn:
- 0537-9989
publication_status: published
publisher: IET
related_material:
link:
- relation: research_paper
url: https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwifnf-rhM7uAhWNO-wKHVa-BTAQFjAAegQIBRAC&url=http%3A%2F%2Fciteseerx.ist.psu.edu%2Fviewdoc%2Fdownload%3Fdoi%3D10.1.1.906.2354%26rep%3Drep1%26type%3Dpdf&usg=AOvVaw1oXsq3u2JITo6fIzezp0sI
status: public
title: Supporting Emotional Communication between Multiple Users in Intelligent Home
Environments
type: conference
user_id: '15514'
year: 2006
...