---
_id: '11492'
abstract:
- lang: eng
  text: In this review, we aim to highlight the advantages, challenges, and limitations
    of electronic tongues (e-tongues) in pharmaceutical drug development. The authors,
    therefore, critically evaluated the performance of e-tongues regarding their qualification
    to assess peroral formulations containing bitter active pharmaceutical ingredients.
    A literature search using the keywords ‘electronic’, ‘tongue’, ‘bitter’, and ‘drug’
    in a Web of Science search was therefore initially conducted. Reviewing the publications
    of the past decade, and further literature where necessary, allowed the authors
    to discuss whether and how e-tongues perform as expected and whether they have
    the potential to become a standard tool in drug development. Specifically highlighted
    are the expectations an e-tongue should meet. Further, a brief insight into the
    technologies of the utilized e-tongues is given. Reliable protocols were found
    that enable (i) the qualified performance of e-tongue instruments from an analytical
    perspective, (ii) proper taste-masking assessments, and (iii) under certain circumstances,
    the evaluation of bitterness.
article_type: review
author:
- first_name: Denise
  full_name: Steiner, Denise
  last_name: Steiner
- first_name: Alexander
  full_name: Meyer, Alexander
  id: '58585'
  last_name: Meyer
- first_name: Isabell
  full_name: Immohr, Isabell
  last_name: Immohr
- first_name: Miriam
  full_name: Pein-Hackelbusch, Miriam
  id: '64952'
  last_name: Pein-Hackelbusch
  orcid: 0000-0002-7920-0595
citation:
  ama: Steiner D, Meyer A, Immohr I, Pein-Hackelbusch M. Critical View on the Qualification
    of Electronic Tongues Regarding Their Performance in the Development of Peroral
    Drug Formulations with Bitter Ingredients. <i>Pharmaceutics</i>. 2024;16(5). doi:<a
    href="https://doi.org/10.3390/pharmaceutics16050658">10.3390/pharmaceutics16050658</a>
  apa: Steiner, D., Meyer, A., Immohr, I., &#38; Pein-Hackelbusch, M. (2024). Critical
    View on the Qualification of Electronic Tongues Regarding Their Performance in
    the Development of Peroral Drug Formulations with Bitter Ingredients. <i>Pharmaceutics</i>,
    <i>16</i>(5). <a href="https://doi.org/10.3390/pharmaceutics16050658">https://doi.org/10.3390/pharmaceutics16050658</a>
  bjps: <b>Steiner D <i>et al.</i></b> (2024) Critical View on the Qualification of
    Electronic Tongues Regarding Their Performance in the Development of Peroral Drug
    Formulations with Bitter Ingredients. <i>Pharmaceutics</i> <b>16</b>.
  chicago: Steiner, Denise, Alexander Meyer, Isabell Immohr, and Miriam Pein-Hackelbusch.
    “Critical View on the Qualification of Electronic Tongues Regarding Their Performance
    in the Development of Peroral Drug Formulations with Bitter Ingredients.” <i>Pharmaceutics</i>
    16, no. 5 (2024). <a href="https://doi.org/10.3390/pharmaceutics16050658">https://doi.org/10.3390/pharmaceutics16050658</a>.
  chicago-de: Steiner, Denise, Alexander Meyer, Isabell Immohr und Miriam Pein-Hackelbusch.
    2024. Critical View on the Qualification of Electronic Tongues Regarding Their
    Performance in the Development of Peroral Drug Formulations with Bitter Ingredients.
    <i>Pharmaceutics</i> 16, Nr. 5. doi:<a href="https://doi.org/10.3390/pharmaceutics16050658">10.3390/pharmaceutics16050658</a>,
    .
  din1505-2-1: '<span style="font-variant:small-caps;">Steiner, Denise</span> ; <span
    style="font-variant:small-caps;">Meyer, Alexander</span> ; <span style="font-variant:small-caps;">Immohr,
    Isabell</span> ; <span style="font-variant:small-caps;">Pein-Hackelbusch, Miriam</span>:
    Critical View on the Qualification of Electronic Tongues Regarding Their Performance
    in the Development of Peroral Drug Formulations with Bitter Ingredients. In: <i>Pharmaceutics</i>
    Bd. 16. Basel, MDPI (2024), Nr. 5'
  havard: D. Steiner, A. Meyer, I. Immohr, M. Pein-Hackelbusch, Critical View on the
    Qualification of Electronic Tongues Regarding Their Performance in the Development
    of Peroral Drug Formulations with Bitter Ingredients, Pharmaceutics. 16 (2024).
  ieee: 'D. Steiner, A. Meyer, I. Immohr, and M. Pein-Hackelbusch, “Critical View
    on the Qualification of Electronic Tongues Regarding Their Performance in the
    Development of Peroral Drug Formulations with Bitter Ingredients,” <i>Pharmaceutics</i>,
    vol. 16, no. 5, 2024, doi: <a href="https://doi.org/10.3390/pharmaceutics16050658">10.3390/pharmaceutics16050658</a>.'
  mla: Steiner, Denise, et al. “Critical View on the Qualification of Electronic Tongues
    Regarding Their Performance in the Development of Peroral Drug Formulations with
    Bitter Ingredients.” <i>Pharmaceutics</i>, vol. 16, no. 5, 2024, <a href="https://doi.org/10.3390/pharmaceutics16050658">https://doi.org/10.3390/pharmaceutics16050658</a>.
  short: D. Steiner, A. Meyer, I. Immohr, M. Pein-Hackelbusch, Pharmaceutics 16 (2024).
  ufg: '<b>Steiner, Denise u. a.</b>: Critical View on the Qualification of Electronic
    Tongues Regarding Their Performance in the Development of Peroral Drug Formulations
    with Bitter Ingredients, in: <i>Pharmaceutics</i> 16 (2024), H. 5.'
  van: Steiner D, Meyer A, Immohr I, Pein-Hackelbusch M. Critical View on the Qualification
    of Electronic Tongues Regarding Their Performance in the Development of Peroral
    Drug Formulations with Bitter Ingredients. Pharmaceutics. 2024;16(5).
date_created: 2024-05-29T10:06:47Z
date_updated: 2025-06-24T09:07:27Z
department:
- _id: DEP4028
doi: 10.3390/pharmaceutics16050658
external_id:
  isi:
  - '001231317000001'
  pmid:
  - '38794320'
intvolume: '        16'
isi: '1'
issue: '5'
keyword:
- e-tongues
- performance
- qualification
- taste masking
- bitterness
- dosage forms
- drug formulations
language:
- iso: eng
main_file_link:
- open_access: '1'
  url: https://www.mdpi.com/1999-4923/16/5/658
oa: '1'
place: Basel
pmid: '1'
publication: Pharmaceutics
publication_identifier:
  eissn:
  - '1999-4923 '
publication_status: published
publisher: MDPI
quality_controlled: '1'
status: public
title: Critical View on the Qualification of Electronic Tongues Regarding Their Performance
  in the Development of Peroral Drug Formulations with Bitter Ingredients
type: scientific_journal_article
user_id: '83778'
volume: 16
year: '2024'
...
---
_id: '13019'
abstract:
- lang: eng
  text: The digital transformation of manufacturing companies is a huge driver of
    complexity in organizational structures and processes. Challenges such as an increasing
    number of variants, rapid changes in technology, and a multitude of interfaces
    between IT systems within companies require changed qualifications in the workforce.
    Employees lack a profound understanding of the added value that digitalization
    can bring to the company and themselves. To address these challenges, simulation
    games are a suitable approach. Simulation games are active learning methods that
    simulate real systems in an artificial environment. The goal is to give employees
    the opportunity to gain experience and make decisions without creating a pressure
    situation or endangering the real production system. This enables them to better
    understand, evaluate and design real systems. In order to make optimal use of
    simulation games in manufacturing companies, they should be customized to the
    company and its employees due to individual processes and structures. This paper
    presents a procedure model for designing a concept of individualized simulation
    games for manufacturing companies in the context of digitalization. It starts
    with the identification of requirements. Subsequently, the requirements of the
    individual elements are combined into a holistic simulation game. The piloting
    of the framework is presented using an example from industrial practice.
author:
- first_name: Fabian
  full_name: Machon, Fabian
  last_name: Machon
- first_name: Stefan
  full_name: Gabriel, Stefan
  last_name: Gabriel
- first_name: Benedikt
  full_name: Latos, Benedikt
  id: '84474'
  last_name: Latos
- first_name: Christoph
  full_name: Holtkötter, Christoph
  last_name: Holtkötter
- first_name: Ben
  full_name: Lütkehoff, Ben
  last_name: Lütkehoff
- first_name: Laban
  full_name: Asmar, Laban
  last_name: Asmar
- first_name: Dr. Arno
  full_name: Kühn, Dr. Arno
  last_name: Kühn
- first_name: Prof. Dr. Roman
  full_name: Dumitrescu, Prof. Dr. Roman
  last_name: Dumitrescu
citation:
  ama: Machon F, Gabriel S, Latos B, et al. Design of individual simulation games
    in manufacturing companies for game-based learning. <i>Procedia CIRP</i>. 2023;119:1017-1022.
    doi:<a href="https://doi.org/10.1016/j.procir.2023.03.145">10.1016/j.procir.2023.03.145</a>
  apa: Machon, F., Gabriel, S., Latos, B., Holtkötter, C., Lütkehoff, B., Asmar, L.,
    Kühn, Dr. A., &#38; Dumitrescu, Prof. Dr. R. (2023). Design of individual simulation
    games in manufacturing companies for game-based learning. <i>Procedia CIRP</i>,
    <i>119</i>, 1017–1022. <a href="https://doi.org/10.1016/j.procir.2023.03.145">https://doi.org/10.1016/j.procir.2023.03.145</a>
  bjps: <b>Machon F <i>et al.</i></b> (2023) Design of Individual Simulation Games
    in Manufacturing Companies for Game-Based Learning. <i>Procedia CIRP</i> <b>119</b>,
    1017–1022.
  chicago: 'Machon, Fabian, Stefan Gabriel, Benedikt Latos, Christoph Holtkötter,
    Ben Lütkehoff, Laban Asmar, Dr. Arno Kühn, and Prof. Dr. Roman Dumitrescu. “Design
    of Individual Simulation Games in Manufacturing Companies for Game-Based Learning.”
    <i>Procedia CIRP</i> 119 (2023): 1017–22. <a href="https://doi.org/10.1016/j.procir.2023.03.145">https://doi.org/10.1016/j.procir.2023.03.145</a>.'
  chicago-de: 'Machon, Fabian, Stefan Gabriel, Benedikt Latos, Christoph Holtkötter,
    Ben Lütkehoff, Laban Asmar, Dr. Arno Kühn und Prof. Dr. Roman Dumitrescu. 2023.
    Design of individual simulation games in manufacturing companies for game-based
    learning. <i>Procedia CIRP</i> 119: 1017–1022. doi:<a href="https://doi.org/10.1016/j.procir.2023.03.145">10.1016/j.procir.2023.03.145</a>,
    .'
  din1505-2-1: '<span style="font-variant:small-caps;">Machon, Fabian</span> ; <span
    style="font-variant:small-caps;">Gabriel, Stefan</span> ; <span style="font-variant:small-caps;">Latos,
    Benedikt</span> ; <span style="font-variant:small-caps;">Holtkötter, Christoph</span>
    ; <span style="font-variant:small-caps;">Lütkehoff, Ben</span> ; <span style="font-variant:small-caps;">Asmar,
    Laban</span> ; <span style="font-variant:small-caps;">Kühn, Dr. Arno</span> ;
    <span style="font-variant:small-caps;">Dumitrescu, Prof. Dr. Roman</span>: Design
    of individual simulation games in manufacturing companies for game-based learning.
    In: <i>Procedia CIRP</i> Bd. 119. Amsterdam [u.a.], Elsevier BV (2023), S. 1017–1022'
  havard: F. Machon, S. Gabriel, B. Latos, C. Holtkötter, B. Lütkehoff, L. Asmar,
    Dr.A. Kühn, Prof.Dr.R. Dumitrescu, Design of individual simulation games in manufacturing
    companies for game-based learning, Procedia CIRP. 119 (2023) 1017–1022.
  ieee: 'F. Machon <i>et al.</i>, “Design of individual simulation games in manufacturing
    companies for game-based learning,” <i>Procedia CIRP</i>, vol. 119, pp. 1017–1022,
    2023, doi: <a href="https://doi.org/10.1016/j.procir.2023.03.145">10.1016/j.procir.2023.03.145</a>.'
  mla: Machon, Fabian, et al. “Design of Individual Simulation Games in Manufacturing
    Companies for Game-Based Learning.” <i>Procedia CIRP</i>, vol. 119, 2023, pp.
    1017–22, <a href="https://doi.org/10.1016/j.procir.2023.03.145">https://doi.org/10.1016/j.procir.2023.03.145</a>.
  short: F. Machon, S. Gabriel, B. Latos, C. Holtkötter, B. Lütkehoff, L. Asmar, Dr.A.
    Kühn, Prof.Dr.R. Dumitrescu, Procedia CIRP 119 (2023) 1017–1022.
  ufg: '<b>Machon, Fabian u. a.</b>: Design of individual simulation games in manufacturing
    companies for game-based learning, in: <i>Procedia CIRP</i> 119 (2023),  S. 1017–1022.'
  van: Machon F, Gabriel S, Latos B, Holtkötter C, Lütkehoff B, Asmar L, et al. Design
    of individual simulation games in manufacturing companies for game-based learning.
    Procedia CIRP. 2023;119:1017–22.
date_created: 2025-06-24T13:42:09Z
date_updated: 2025-06-24T13:45:56Z
department:
- _id: DEP1500
doi: 10.1016/j.procir.2023.03.145
intvolume: '       119'
keyword:
- industry 4.0
- digitalization
- digital transformation
- simulation games
- game-based learning
- education
- employee education
- qualification
language:
- iso: eng
page: 1017-1022
place: Amsterdam [u.a.]
publication: Procedia CIRP
publication_identifier:
  issn:
  - 2212-8271
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Design of individual simulation games in manufacturing companies for game-based
  learning
type: scientific_journal_article
user_id: '83781'
volume: 119
year: '2023'
...
---
_id: '12789'
abstract:
- lang: eng
  text: Additive manufacturing is being increasingly focused on the production of
    end-use parts. Compared to the prototyping application, the production of end-use
    parts demands a higher level of repeatability and process quality. To achieve
    this, increased knowledge is required about the influence of various process parameters
    on the part characteristics and the parameter interrelations. Design of Experiment
    methods can be applied to gain knowledge on the process behavior, but the applicability
    of different DoE methods for AM processes has to be validated. This paper describes
    the application of a definitive screening design for the identification of influencing
    parameters in Laser Powder Bed Fusion of CoCrW alloy. The impact of various hatch
    parameters on the part porosity is analyzed. The experimental setup and results
    are described. The results are validated in an additional test series, comparing
    the part quality achieved by parameter-sets obtained by different optimization
    approaches. Furthermore, the correlation of the porosity towards mechanical properties
    is investigated. Finally, the opportunities and limitations of the method are
    discussed.
author:
- first_name: Andrea
  full_name: Huxol, Andrea
  id: '43559'
  last_name: Huxol
- first_name: Franz-Josef
  full_name: Villmer, Franz-Josef
  id: '14290'
  last_name: Villmer
citation:
  ama: Huxol A, Villmer FJ. Experimental approach towards parameter evaluation in
    laser powder bed fusion of metals. <i>International Journal of Computer Integrated
    Manufacturing</i>. 2021;35(4-5):556-567. doi:<a href="https://doi.org/10.1080/0951192x.2021.1901313">10.1080/0951192x.2021.1901313</a>
  apa: Huxol, A., &#38; Villmer, F.-J. (2021). Experimental approach towards parameter
    evaluation in laser powder bed fusion of metals. <i>International Journal of Computer
    Integrated Manufacturing</i>, <i>35</i>(4–5), 556–567. <a href="https://doi.org/10.1080/0951192x.2021.1901313">https://doi.org/10.1080/0951192x.2021.1901313</a>
  bjps: <b>Huxol A and Villmer F-J</b> (2021) Experimental Approach towards Parameter
    Evaluation in Laser Powder Bed Fusion of Metals. <i>International Journal of Computer
    Integrated Manufacturing</i> <b>35</b>, 556–567.
  chicago: 'Huxol, Andrea, and Franz-Josef Villmer. “Experimental Approach towards
    Parameter Evaluation in Laser Powder Bed Fusion of Metals.” <i>International Journal
    of Computer Integrated Manufacturing</i> 35, no. 4–5 (2021): 556–67. <a href="https://doi.org/10.1080/0951192x.2021.1901313">https://doi.org/10.1080/0951192x.2021.1901313</a>.'
  chicago-de: 'Huxol, Andrea und Franz-Josef Villmer. 2021. Experimental approach
    towards parameter evaluation in laser powder bed fusion of metals. <i>International
    Journal of Computer Integrated Manufacturing</i> 35, Nr. 4–5: 556–567. doi:<a
    href="https://doi.org/10.1080/0951192x.2021.1901313">10.1080/0951192x.2021.1901313</a>,
    .'
  din1505-2-1: '<span style="font-variant:small-caps;">Huxol, Andrea</span> ; <span
    style="font-variant:small-caps;">Villmer, Franz-Josef</span>: Experimental approach
    towards parameter evaluation in laser powder bed fusion of metals. In: <i>International
    Journal of Computer Integrated Manufacturing</i> Bd. 35. London [u.a.], Taylor
    &#38; Francis (2021), Nr. 4–5, S. 556–567'
  havard: A. Huxol, F.-J. Villmer, Experimental approach towards parameter evaluation
    in laser powder bed fusion of metals, International Journal of Computer Integrated
    Manufacturing. 35 (2021) 556–567.
  ieee: 'A. Huxol and F.-J. Villmer, “Experimental approach towards parameter evaluation
    in laser powder bed fusion of metals,” <i>International Journal of Computer Integrated
    Manufacturing</i>, vol. 35, no. 4–5, pp. 556–567, 2021, doi: <a href="https://doi.org/10.1080/0951192x.2021.1901313">10.1080/0951192x.2021.1901313</a>.'
  mla: Huxol, Andrea, and Franz-Josef Villmer. “Experimental Approach towards Parameter
    Evaluation in Laser Powder Bed Fusion of Metals.” <i>International Journal of
    Computer Integrated Manufacturing</i>, vol. 35, no. 4–5, 2021, pp. 556–67, <a
    href="https://doi.org/10.1080/0951192x.2021.1901313">https://doi.org/10.1080/0951192x.2021.1901313</a>.
  short: A. Huxol, F.-J. Villmer, International Journal of Computer Integrated Manufacturing
    35 (2021) 556–567.
  ufg: '<b>Huxol, Andrea/Villmer, Franz-Josef</b>: Experimental approach towards parameter
    evaluation in laser powder bed fusion of metals, in: <i>International Journal
    of Computer Integrated Manufacturing</i> 35 (2021), H. 4–5,  S. 556–567.'
  van: Huxol A, Villmer FJ. Experimental approach towards parameter evaluation in
    laser powder bed fusion of metals. International Journal of Computer Integrated
    Manufacturing. 2021;35(4–5):556–67.
date_created: 2025-04-15T08:18:06Z
date_updated: 2025-06-26T07:56:42Z
department:
- _id: DEP7000
doi: 10.1080/0951192x.2021.1901313
external_id:
  isi:
  - '000630944800001'
intvolume: '        35'
isi: '1'
issue: 4-5
keyword:
- Additive manufacturing
- quality control
- process qualification
- process control
- screening design
language:
- iso: eng
page: 556-567
place: London [u.a.]
publication: International Journal of Computer Integrated Manufacturing
publication_identifier:
  eissn:
  - 1362-3052
  issn:
  - 0951-192X
publication_status: published
publisher: Taylor & Francis
status: public
title: Experimental approach towards parameter evaluation in laser powder bed fusion
  of metals
type: scientific_journal_article
user_id: '83781'
volume: 35
year: '2021'
...
---
_id: '12791'
abstract:
- lang: eng
  text: Additive manufacturing is being increasingly focused on the production of
    end-use parts. Compared to the prototyping application, the production of end-use
    parts demands a higher level of repeatability and process quality. To achieve
    this, increased knowledge is required about the influence of various process parameters
    on the part characteristics and the parameter interrelations. Design of Experiment
    methods can be applied to gain knowledge on the process behavior, but the applicability
    of different DoE methods for AM processes has to be validated. This paper describes
    the application of a definitive screening design for the identification of influencing
    parameters in Selective Laser Melting. The experimental setup and results are
    described and opportunities and limitations of the method are discussed. (C) 2019,
    IFAC (International Federation of Automatic Control) Hosting by Elsevier Ltd.
    All rights reserved.
author:
- first_name: Andrea
  full_name: Huxol, Andrea
  id: '43559'
  last_name: Huxol
- first_name: Franz-Josef
  full_name: Villmer, Franz-Josef
  id: '14290'
  last_name: Villmer
citation:
  ama: Huxol A, Villmer FJ. <i>DoE Methods for Parameter Evaluation in Selective Laser
    Melting</i>. Vol 52. Elsevier BV; 2019:270-275. doi:<a href="https://doi.org/10.1016/j.ifacol.2019.10.041">10.1016/j.ifacol.2019.10.041</a>
  apa: Huxol, A., &#38; Villmer, F.-J. (2019). DoE Methods for Parameter Evaluation
    in Selective Laser Melting. In <i>13th International-Federation-of-Automatic-Control
    (IFAC) Workshop on Intelligent Manufacturing Systems (IMS)</i> (Vol. 52, pp. 270–275).
    Elsevier BV. <a href="https://doi.org/10.1016/j.ifacol.2019.10.041">https://doi.org/10.1016/j.ifacol.2019.10.041</a>
  bjps: '<b>Huxol A and Villmer F-J</b> (2019) <i>DoE Methods for Parameter Evaluation
    in Selective Laser Melting</i>. Amsterdam [u.a.]: Elsevier BV.'
  chicago: 'Huxol, Andrea, and Franz-Josef Villmer. <i>DoE Methods for Parameter Evaluation
    in Selective Laser Melting</i>. <i>13th International-Federation-of-Automatic-Control
    (IFAC) Workshop on Intelligent Manufacturing Systems (IMS)</i>. Vol. 52. IFAC-PapersOnLine.
    Amsterdam [u.a.]: Elsevier BV, 2019. <a href="https://doi.org/10.1016/j.ifacol.2019.10.041">https://doi.org/10.1016/j.ifacol.2019.10.041</a>.'
  chicago-de: 'Huxol, Andrea und Franz-Josef Villmer. 2019. <i>DoE Methods for Parameter
    Evaluation in Selective Laser Melting</i>. <i>13th International-Federation-of-Automatic-Control
    (IFAC) Workshop on Intelligent Manufacturing Systems (IMS)</i>. Bd. 52. IFAC-PapersOnLine.
    Amsterdam [u.a.]: Elsevier BV. doi:<a href="https://doi.org/10.1016/j.ifacol.2019.10.041">10.1016/j.ifacol.2019.10.041</a>,
    .'
  din1505-2-1: '<span style="font-variant:small-caps;">Huxol, Andrea</span> ; <span
    style="font-variant:small-caps;">Villmer, Franz-Josef</span>: <i>DoE Methods for
    Parameter Evaluation in Selective Laser Melting</i>, <i>IFAC-PapersOnLine</i>.
    Bd. 52. Amsterdam [u.a.] : Elsevier BV, 2019'
  havard: A. Huxol, F.-J. Villmer, DoE Methods for Parameter Evaluation in Selective
    Laser Melting, Elsevier BV, Amsterdam [u.a.], 2019.
  ieee: 'A. Huxol and F.-J. Villmer, <i>DoE Methods for Parameter Evaluation in Selective
    Laser Melting</i>, vol. 52. Amsterdam [u.a.]: Elsevier BV, 2019, pp. 270–275.
    doi: <a href="https://doi.org/10.1016/j.ifacol.2019.10.041">10.1016/j.ifacol.2019.10.041</a>.'
  mla: Huxol, Andrea, and Franz-Josef Villmer. “DoE Methods for Parameter Evaluation
    in Selective Laser Melting.” <i>13th International-Federation-of-Automatic-Control
    (IFAC) Workshop on Intelligent Manufacturing Systems (IMS)</i>, vol. 52, Elsevier
    BV, 2019, pp. 270–75, <a href="https://doi.org/10.1016/j.ifacol.2019.10.041">https://doi.org/10.1016/j.ifacol.2019.10.041</a>.
  short: A. Huxol, F.-J. Villmer, DoE Methods for Parameter Evaluation in Selective
    Laser Melting, Elsevier BV, Amsterdam [u.a.], 2019.
  ufg: '<b>Huxol, Andrea/Villmer, Franz-Josef</b>: DoE Methods for Parameter Evaluation
    in Selective Laser Melting, Bd. 52, Amsterdam [u.a.] 2019 (IFAC-PapersOnLine).'
  van: 'Huxol A, Villmer FJ. DoE Methods for Parameter Evaluation in Selective Laser
    Melting. 13th International-Federation-of-Automatic-Control (IFAC) Workshop on
    Intelligent Manufacturing Systems (IMS). Amsterdam [u.a.]: Elsevier BV; 2019.
    (IFAC-PapersOnLine; vol. 52).'
conference:
  end_date: 2019-08-14
  location: Oshawa, CANADA
  name: 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent
    Manufacturing Systems (IMS)
  start_date: 2019-08-12
date_created: 2025-04-15T09:27:00Z
date_updated: 2025-06-26T13:40:48Z
department:
- _id: DEP7000
doi: 10.1016/j.ifacol.2019.10.041
intvolume: '        52'
keyword:
- Additive manufacturing
- quality control
- process qualification
- process control
- screening design
language:
- iso: eng
page: 270-275
place: Amsterdam [u.a.]
publication: 13th International-Federation-of-Automatic-Control (IFAC) Workshop on
  Intelligent Manufacturing Systems (IMS)
publication_identifier:
  issn:
  - 2405-8963
publication_status: published
publisher: Elsevier BV
series_title: IFAC-PapersOnLine
status: public
title: DoE Methods for Parameter Evaluation in Selective Laser Melting
type: conference_editor_article
user_id: '83781'
volume: 52
year: '2019'
...