---
_id: '13915'
abstract:
- lang: eng
text: Strategies based on an optimal balance between standardization and individualization
must be implemented to successfully overcome the current low level of automation
in building construction. Project-specific adaptability can be ensured by a combination
of automated machine technology and digital planning tools available today. In
addition to achieving economic advantages, the focus is on improving sustainability
factors, which concern both material consumption and functionality and improved
use of resources and energy for building production and operation. The results
of research into “lightweight aerogel concrete technology” has shown that an innovative
liquid material mixture with insulating properties can be successfully implemented
in an automated production process. An adaptive system for standardized wall,
ceiling, and floor panels was developed, which can adapt to specific functionality
needs and thus address the requirements of individual building tasks while keeping
economic as well as architectural factors in mind. The advanced mono-material
complies with current European regulations for insulated wall structures, considering
the requirements for load-bearing capacity. Due to its homogeneous insulation
effect across the entire element section, the aero lightweight concrete allows
for intelligent detailing and connection principles and prevents the formation
of thermal bridges. The relationship between material composition, material production,
construction method, and building operation is essential for a circular planning
process. Robotization as a multiple fabrication technology may facilitate these
parameters in one cycle. The new technology allows for the crucial transition
from research to an end-to-end construction workflow that maps the entire process
chain, from concept planning to design and joining principles up to fabrication
and assembly.
author:
- first_name: Jutta
full_name: Albus, Jutta
last_name: Albus
- first_name: Kirsten
full_name: Hollmann-Schröter, Kirsten
id: '90080'
last_name: Hollmann-Schröter
orcid: https://orcid.org/0000-0003-2959-0211
citation:
ama: Albus J, Hollmann-Schröter K. Prototypical approach for an individualized standardization
process in the context of intelligent construction and automation. Architecture,
Structures and Construction. 2023;3(2):275-278. doi:https://doi.org/10.1007/s44150-023-00081-0
apa: Albus, J., & Hollmann-Schröter, K. (2023). Prototypical approach for an
individualized standardization process in the context of intelligent construction
and automation. Architecture, Structures and Construction, 3(2),
275–278. https://doi.org/10.1007/s44150-023-00081-0
bjps: Albus J and Hollmann-Schröter K (2023) Prototypical Approach for an
Individualized Standardization Process in the Context of Intelligent Construction
and Automation. Architecture, Structures and Construction 3, 275–278.
chicago: 'Albus, Jutta, and Kirsten Hollmann-Schröter. “Prototypical Approach for
an Individualized Standardization Process in the Context of Intelligent Construction
and Automation.” Architecture, Structures and Construction 3, no. 2 (2023):
275–78. https://doi.org/10.1007/s44150-023-00081-0.'
chicago-de: 'Albus, Jutta und Kirsten Hollmann-Schröter. 2023. Prototypical approach
for an individualized standardization process in the context of intelligent construction
and automation. Architecture, Structures and Construction 3, Nr. 2: 275–278.
doi:https://doi.org/10.1007/s44150-023-00081-0,
.'
din1505-2-1: 'Albus, Jutta ; Hollmann-Schröter, Kirsten: Prototypical
approach for an individualized standardization process in the context of intelligent
construction and automation. In: Architecture, Structures and Construction
Bd. 3. [Cham] , Springer Nature (2023), Nr. 2, S. 275–278'
havard: J. Albus, K. Hollmann-Schröter, Prototypical approach for an individualized
standardization process in the context of intelligent construction and automation,
Architecture, Structures and Construction. 3 (2023) 275–278.
ieee: 'J. Albus and K. Hollmann-Schröter, “Prototypical approach for an individualized
standardization process in the context of intelligent construction and automation,”
Architecture, Structures and Construction, vol. 3, no. 2, pp. 275–278,
2023, doi: https://doi.org/10.1007/s44150-023-00081-0.'
mla: Albus, Jutta, and Kirsten Hollmann-Schröter. “Prototypical Approach for an
Individualized Standardization Process in the Context of Intelligent Construction
and Automation.” Architecture, Structures and Construction, vol. 3, no.
2, 2023, pp. 275–78, https://doi.org/10.1007/s44150-023-00081-0.
short: J. Albus, K. Hollmann-Schröter, Architecture, Structures and Construction
3 (2023) 275–278.
ufg: 'Albus, Jutta/Hollmann-Schröter, Kirsten: Prototypical approach for
an individualized standardization process in the context of intelligent construction
and automation, in: Architecture, Structures and Construction 3 (2023),
H. 2, S. 275–278.'
van: Albus J, Hollmann-Schröter K. Prototypical approach for an individualized standardization
process in the context of intelligent construction and automation. Architecture,
Structures and Construction. 2023;3(2):275–8.
date_created: 2026-08-07T09:25:07Z
date_updated: 2026-08-07T13:17:49Z
department:
- _id: DEP1022
doi: https://doi.org/10.1007/s44150-023-00081-0
extern: '1'
intvolume: ' 3'
issue: '2'
keyword:
- Individualized standardization
- Adaptability
- Lightweight aerogel concrete technology
- Resource optimization
language:
- iso: eng
page: 275-278
place: ' [Cham] '
publication: Architecture, Structures and Construction
publication_identifier:
eissn:
- 2730-9894
publication_status: published
publisher: Springer Nature
quality_controlled: '1'
status: public
title: Prototypical approach for an individualized standardization process in the
context of intelligent construction and automation
type: scientific_journal_article
user_id: '83781'
volume: 3
year: '2023'
...
---
_id: '13909'
abstract:
- lang: eng
text: To drive forward a fundamental change in the construction sector to achieve
environmentally friendly progress in the construction processes, one promising
approach is the synchronous implementation of the three main drivers technology,
construction, and design. The key to this transformation is end-to-end digitalization.
Our approach aims to achieve a new architectural quality by linking digitized
design tools, ecological and environmentally friendly concepts, and serial production
processes. Against this background, two research projects were advanced to enable
adaptive prefabricated systems based on combined additive manufacturing. Two case
studies illustrate the research results. In the first, a digital assessment tool
is being developed to improve planning processes. With the tool, standardized
yet adaptive constructions can be evaluated according to their sustainability
impact in an early design phase. The second approach focuses on delivering a customized
material composition realized with additive manufacturing methods. In an automated
co-extrusion process, the dimensions and building-physical quality of story-high
wall panels (floor-to-ceiling) can be adapted to individual requirements. The
optimum balance of standardization vs individualized building solutions will introduce
a novel flexibility for the architectural design process as well as a higher production
efficiency. This strategy of individualized standardization is based on integrative
collaboration and visionary research.
article_number: '012071'
author:
- first_name: Jutta
full_name: Albus, Jutta
last_name: Albus
- first_name: Kirsten
full_name: Hollmann-Schröter, Kirsten
id: '90080'
last_name: Hollmann-Schröter
orcid: https://orcid.org/0000-0003-2959-0211
citation:
ama: 'Albus J, Hollmann-Schröter K. Individualized standardization as the overarching
principle in the context of planetary boundaries. IOP Conference Series: Earth
and Environmental Science. 2022;1078(1). doi:10.1088/1755-1315/1078/1/012071'
apa: 'Albus, J., & Hollmann-Schröter, K. (2022). Individualized standardization
as the overarching principle in the context of planetary boundaries. IOP Conference
Series: Earth and Environmental Science, 1078(1), Article 012071. https://doi.org/10.1088/1755-1315/1078/1/012071'
bjps: 'Albus J and Hollmann-Schröter K (2022) Individualized Standardization
as the Overarching Principle in the Context of Planetary Boundaries. IOP Conference
Series: Earth and Environmental Science 1078.'
chicago: 'Albus, Jutta, and Kirsten Hollmann-Schröter. “Individualized Standardization
as the Overarching Principle in the Context of Planetary Boundaries.” IOP Conference
Series: Earth and Environmental Science 1078, no. 1 (2022). https://doi.org/10.1088/1755-1315/1078/1/012071.'
chicago-de: 'Albus, Jutta und Kirsten Hollmann-Schröter. 2022. Individualized standardization
as the overarching principle in the context of planetary boundaries. IOP Conference
Series: Earth and Environmental Science 1078, Nr. 1. doi:10.1088/1755-1315/1078/1/012071,
.'
din1505-2-1: 'Albus, Jutta ; Hollmann-Schröter, Kirsten: Individualized
standardization as the overarching principle in the context of planetary boundaries.
In: IOP Conference Series: Earth and Environmental Science Bd. 1078. London,
IOP Publishing (2022), Nr. 1'
havard: 'J. Albus, K. Hollmann-Schröter, Individualized standardization as the overarching
principle in the context of planetary boundaries, IOP Conference Series: Earth
and Environmental Science. 1078 (2022).'
ieee: 'J. Albus and K. Hollmann-Schröter, “Individualized standardization as the
overarching principle in the context of planetary boundaries,” IOP Conference
Series: Earth and Environmental Science, vol. 1078, no. 1, Art. no. 012071,
2022, doi: 10.1088/1755-1315/1078/1/012071.'
mla: 'Albus, Jutta, and Kirsten Hollmann-Schröter. “Individualized Standardization
as the Overarching Principle in the Context of Planetary Boundaries.” IOP Conference
Series: Earth and Environmental Science, vol. 1078, no. 1, 012071, 2022, https://doi.org/10.1088/1755-1315/1078/1/012071.'
short: 'J. Albus, K. Hollmann-Schröter, IOP Conference Series: Earth and Environmental
Science 1078 (2022).'
ufg: 'Albus, Jutta/Hollmann-Schröter, Kirsten: Individualized standardization
as the overarching principle in the context of planetary boundaries, in: IOP
Conference Series: Earth and Environmental Science 1078 (2022), H. 1.'
van: 'Albus J, Hollmann-Schröter K. Individualized standardization as the overarching
principle in the context of planetary boundaries. IOP Conference Series: Earth
and Environmental Science. 2022;1078(1).'
date_created: 2026-08-06T16:23:36Z
date_updated: 2026-08-07T09:03:23Z
department:
- _id: DEP1022
doi: 10.1088/1755-1315/1078/1/012071
extern: '1'
intvolume: ' 1078'
issue: '1'
keyword:
- Individualized standardization
- case study
- lightweight aerogel concrete technology
- adaptability
- sustainability assessment
language:
- iso: eng
place: London
publication: 'IOP Conference Series: Earth and Environmental Science'
publication_identifier:
eissn:
- 1755-1315
issn:
- 1755-1307
publication_status: published
publisher: IOP Publishing
status: public
title: Individualized standardization as the overarching principle in the context
of planetary boundaries
type: scientific_journal_article
user_id: '83781'
volume: 1078
year: '2022'
...
---
_id: '12953'
abstract:
- lang: eng
text: Starch gelatinization is a major determinant of carbohydrate digestibility
and varies with diet processing. Laboratory rodent diets are often marketed as
identical, but are sold in different forms, regardless of the markedly higher
starch gelatinization in extruded than in pelleted diets. Our hypothesis was that
this would impact energy and nutrient digestibility in mice fed pellets or extrudate,
respectively. Trial 1 showed that feeding C57BL/6 mice a standard maintenance
diet in extruded form results in a significantly higher digestibility of organic
matter, energy, and carbohydrates than the identical diet in pelleted form. The
replication of the experiment, however, revealed a variation between batches of
the same pelleted diet regarding starch and total dietary fiber contents. Given
the significant differences in diet digestibility and the potential impacts of
digestibility on nutrient utilization, the intestinal microbiome, and intermediary
metabolism, trials performed with differently processed diets are not comparable.
This might partly explain failures to reproduce results, especially in gastrointestinal
or microbiome research. Considering this impact on experimental animals, the degree
of starch gelatinization should be declared in the diet information for laboratory
animal diets. The differences between batches of laboratory animal diets as observed
in the pellets are not acceptable.
article_number: '523'
author:
- first_name: Linda F.
full_name: Böswald, Linda F.
last_name: Böswald
- first_name: Jasmin
full_name: Wenderlein, Jasmin
last_name: Wenderlein
- first_name: Reinhard K.
full_name: Straubinger, Reinhard K.
last_name: Straubinger
- first_name: Sebastian
full_name: Ulrich, Sebastian
id: '85847'
last_name: Ulrich
orcid: 0000-0002-4511-9537
- first_name: Ellen
full_name: Kienzle, Ellen
last_name: Kienzle
citation:
ama: Böswald LF, Wenderlein J, Straubinger RK, Ulrich S, Kienzle E. Processing Matters
in Nutrient-Matched Laboratory Diets for Mice—Energy and Nutrient Digestibility.
Animals. 2021;11(2). doi:10.3390/ani11020523
apa: Böswald, L. F., Wenderlein, J., Straubinger, R. K., Ulrich, S., & Kienzle,
E. (2021). Processing Matters in Nutrient-Matched Laboratory Diets for Mice—Energy
and Nutrient Digestibility. Animals, 11(2), Article 523. https://doi.org/10.3390/ani11020523
bjps: Böswald LF et al. (2021) Processing Matters in Nutrient-Matched
Laboratory Diets for Mice—Energy and Nutrient Digestibility. Animals 11.
chicago: Böswald, Linda F., Jasmin Wenderlein, Reinhard K. Straubinger, Sebastian
Ulrich, and Ellen Kienzle. “Processing Matters in Nutrient-Matched Laboratory
Diets for Mice—Energy and Nutrient Digestibility.” Animals 11, no. 2 (2021).
https://doi.org/10.3390/ani11020523.
chicago-de: Böswald, Linda F., Jasmin Wenderlein, Reinhard K. Straubinger, Sebastian
Ulrich und Ellen Kienzle. 2021. Processing Matters in Nutrient-Matched Laboratory
Diets for Mice—Energy and Nutrient Digestibility. Animals 11, Nr. 2. doi:10.3390/ani11020523, .
din1505-2-1: 'Böswald, Linda F. ;
Wenderlein, Jasmin ; Straubinger,
Reinhard K. ; Ulrich, Sebastian
; Kienzle, Ellen: Processing Matters
in Nutrient-Matched Laboratory Diets for Mice—Energy and Nutrient Digestibility.
In: Animals Bd. 11. Basel, MDPI (2021), Nr. 2'
havard: L.F. Böswald, J. Wenderlein, R.K. Straubinger, S. Ulrich, E. Kienzle, Processing
Matters in Nutrient-Matched Laboratory Diets for Mice—Energy and Nutrient Digestibility,
Animals. 11 (2021).
ieee: 'L. F. Böswald, J. Wenderlein, R. K. Straubinger, S. Ulrich, and E. Kienzle,
“Processing Matters in Nutrient-Matched Laboratory Diets for Mice—Energy and Nutrient
Digestibility,” Animals, vol. 11, no. 2, Art. no. 523, 2021, doi: 10.3390/ani11020523.'
mla: Böswald, Linda F., et al. “Processing Matters in Nutrient-Matched Laboratory
Diets for Mice—Energy and Nutrient Digestibility.” Animals, vol. 11, no.
2, 523, 2021, https://doi.org/10.3390/ani11020523.
short: L.F. Böswald, J. Wenderlein, R.K. Straubinger, S. Ulrich, E. Kienzle, Animals
11 (2021).
ufg: 'Böswald, Linda F. u. a.: Processing Matters in Nutrient-Matched Laboratory
Diets for Mice—Energy and Nutrient Digestibility, in: Animals 11 (2021),
H. 2.'
van: Böswald LF, Wenderlein J, Straubinger RK, Ulrich S, Kienzle E. Processing Matters
in Nutrient-Matched Laboratory Diets for Mice—Energy and Nutrient Digestibility.
Animals. 2021;11(2).
date_created: 2025-06-15T10:00:16Z
date_updated: 2025-06-16T12:27:09Z
department:
- _id: DEP4010
doi: 10.3390/ani11020523
extern: '1'
intvolume: ' 11'
issue: '2'
keyword:
- standardization
- carbohydrate digestibility
- feed processing
- starch gelatinization
- gut
language:
- iso: eng
place: Basel
publication: Animals
publication_identifier:
eissn:
- 2076-2615
publication_status: published
publisher: MDPI
quality_controlled: '1'
status: public
title: Processing Matters in Nutrient-Matched Laboratory Diets for Mice—Energy and
Nutrient Digestibility
type: scientific_journal_article
user_id: '83781'
volume: 11
year: '2021'
...
---
_id: '4756'
abstract:
- lang: eng
text: Due to the dynamic nature of the Industrie 4.0 developments, future production
systems will be reconfigured more frequently and new system configurations will
be deployed automatically. In order to keep pace with this development, it will
be required to observe and ensure the needed security functionalities and corresponding
certifications in an automated way. This implies an improvement of today's static
procedures and manual efforts as much as possible in favor of a dynamic standard
establishment. Therefore, this paper evaluates the state of the art of the industrial
security standardization landscape and proposes a concept for the automated support
of certification processes with information from industrial communication networks
in order to enhance the usability of the standards establishments and the certifications
within organizations and companies, especially small and medium-sized enterprises.
author:
- first_name: Marco
full_name: Ehrlich, Marco
id: '61562'
last_name: Ehrlich
- first_name: Henning
full_name: Trsek, Henning
id: '1486'
last_name: Trsek
orcid: 0000-0002-0133-0656
- first_name: Lukasz
full_name: Wisniewski, Lukasz
id: '1710'
last_name: Wisniewski
- first_name: Jürgen
full_name: Jasperneite, Jürgen
id: '1899'
last_name: Jasperneite
citation:
ama: 'Ehrlich M, Trsek H, Wisniewski L, Jasperneite J. Survey of Security Standards
for an automated Industrie 4.0 compatible Manufacturing. In: IEEE Industrial
Electronics Society. Annual Conference , IEEE Industrial Electronics Society ,
Universidade Nova de Lisboa , Institute of Electrical and Electronics Engineers,
eds. IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics
Society (IES). IEEE Industrial Electronics Society. IEEE; 2019:2849-2854.'
apa: Ehrlich, M., Trsek, H., Wisniewski, L., & Jasperneite, J. (2019). Survey
of Security Standards for an automated Industrie 4.0 compatible Manufacturing.
In IEEE Industrial Electronics Society. Annual Conference , IEEE Industrial Electronics
Society , Universidade Nova de Lisboa , & Institute of Electrical and Electronics
Engineers (Eds.), IECON 2019 - 45th Annual Conference of the IEEE Industrial
Electronics Society (IES) (pp. 2849–2854). IEEE.
bjps: 'Ehrlich M et al. (2019) Survey of Security Standards for an
Automated Industrie 4.0 Compatible Manufacturing. In IEEE Industrial Electronics
Society. Annual Conference et al. (eds), IECON 2019 - 45th Annual Conference
of the IEEE Industrial Electronics Society (IES). [Piscataway, NJ]: IEEE,
pp. 2849–2854.'
chicago: 'Ehrlich, Marco, Henning Trsek, Lukasz Wisniewski, and Jürgen Jasperneite.
“Survey of Security Standards for an Automated Industrie 4.0 Compatible Manufacturing.”
In IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society
(IES), edited by IEEE Industrial Electronics Society. Annual Conference ,
IEEE Industrial Electronics Society , Universidade Nova de Lisboa , and Institute
of Electrical and Electronics Engineers, 2849–54. IEEE Industrial Electronics
Society. [Piscataway, NJ]: IEEE, 2019.'
chicago-de: 'Ehrlich, Marco, Henning Trsek, Lukasz Wisniewski und Jürgen Jasperneite.
2019. Survey of Security Standards for an automated Industrie 4.0 compatible Manufacturing.
In: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics
Society (IES), hg. von IEEE Industrial Electronics Society. Annual Conference
, IEEE Industrial Electronics Society , Universidade Nova de Lisboa , und Institute
of Electrical and Electronics Engineers, 2849–2854. IEEE Industrial Electronics
Society. [Piscataway, NJ]: IEEE.'
din1505-2-1: 'Ehrlich, Marco ; Trsek, Henning ; Wisniewski,
Lukasz ; Jasperneite, Jürgen:
Survey of Security Standards for an automated Industrie 4.0 compatible Manufacturing.
In: IEEE Industrial Electronics Society.
Annual Conference ; IEEE Industrial
Electronics Society ; Universidade
Nova de Lisboa ; Institute of Electrical
and Electronics Engineers (Hrsg.): IECON 2019 - 45th Annual Conference
of the IEEE Industrial Electronics Society (IES), IEEE Industrial Electronics
Society. [Piscataway, NJ] : IEEE, 2019, S. 2849–2854'
havard: 'M. Ehrlich, H. Trsek, L. Wisniewski, J. Jasperneite, Survey of Security
Standards for an automated Industrie 4.0 compatible Manufacturing, in: IEEE Industrial
Electronics Society. Annual Conference , IEEE Industrial Electronics Society ,
Universidade Nova de Lisboa , Institute of Electrical and Electronics Engineers
(Eds.), IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics
Society (IES), IEEE, [Piscataway, NJ], 2019: pp. 2849–2854.'
ieee: M. Ehrlich, H. Trsek, L. Wisniewski, and J. Jasperneite, “Survey of Security
Standards for an automated Industrie 4.0 compatible Manufacturing,” in IECON
2019 - 45th Annual Conference of the IEEE Industrial Electronics Society (IES),
Lisbon, PORTUGAL, 2019, pp. 2849–2854.
mla: Ehrlich, Marco, et al. “Survey of Security Standards for an Automated Industrie
4.0 Compatible Manufacturing.” IECON 2019 - 45th Annual Conference of the IEEE
Industrial Electronics Society (IES), edited by IEEE Industrial Electronics
Society. Annual Conference et al., IEEE, 2019, pp. 2849–54.
short: 'M. Ehrlich, H. Trsek, L. Wisniewski, J. Jasperneite, in: IEEE Industrial
Electronics Society. Annual Conference , IEEE Industrial Electronics Society ,
Universidade Nova de Lisboa , Institute of Electrical and Electronics Engineers
(Eds.), IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics
Society (IES), IEEE, [Piscataway, NJ], 2019, pp. 2849–2854.'
ufg: 'Ehrlich, Marco u. a.: Survey of Security Standards for an automated
Industrie 4.0 compatible Manufacturing, in: IEEE Industrial Electronics Society.
Annual Conference u. a. (Hgg.): IECON 2019 - 45th Annual Conference of the
IEEE Industrial Electronics Society (IES), [Piscataway, NJ] 2019 (IEEE Industrial
Electronics Society), S. 2849–2854.'
van: 'Ehrlich M, Trsek H, Wisniewski L, Jasperneite J. Survey of Security Standards
for an automated Industrie 4.0 compatible Manufacturing. In: IEEE Industrial
Electronics Society. Annual Conference , IEEE Industrial Electronics Society ,
Universidade Nova de Lisboa , Institute of Electrical and Electronics Engineers,
editors. IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics
Society (IES). [Piscataway, NJ]: IEEE; 2019. p. 2849–54. (IEEE Industrial Electronics
Society).'
conference:
end_date: 2019-10-19
location: Lisbon, PORTUGAL
name: 45th Annual Conference of the IEEE Industrial Electronics Society (IECON)
start_date: 2019-10-14
corporate_editor:
- ' IEEE Industrial Electronics Society. Annual Conference '
- 'IEEE Industrial Electronics Society '
- 'Universidade Nova de Lisboa '
- Institute of Electrical and Electronics Engineers
date_created: 2021-01-28T14:47:12Z
date_updated: 2025-06-26T13:31:27Z
department:
- _id: DEP5023
- _id: DEP5019
keyword:
- Industrial Automation
- Security
- Toolchain
- Standardization
- Communication Networks
language:
- iso: eng
page: 2849-2854
place: '[Piscataway, NJ]'
publication: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics
Society (IES)
publication_identifier:
eisbn:
- 978-1-7281-4878-6
isbn:
- 978-1-7281-4879-3
issn:
- 1553-572X
publication_status: published
publisher: IEEE
series_title: IEEE Industrial Electronics Society
status: public
title: Survey of Security Standards for an automated Industrie 4.0 compatible Manufacturing
type: conference
user_id: '83781'
year: '2019'
...