---
_id: '7983'
abstract:
- lang: eng
text: For the manufacturing of complex biopharmaceuticals using bioreactors with
cultivated mammalian cells, high product concentration is an important objective.
The phenotype of the cells in a reactor plays an important role. Are clonal cell
populations showing high cell-specific growth rates more favorable than cell lines
with higher cell-specific productivities or vice versa? Five clonal Chinese hamster
ovary cell populations were analyzed based on the data of a 3-month-stability
study. We adapted a mechanistic cell culture model to the experimental data of
one such clonally derived cell population. Uncertainties and prior knowledge concerning
model parameters were considered using Bayesian parameter estimations. This model
was used then to define an inoculum train protocol. Based on this, we subsequently
simulated the impacts of differences in growth rates (±10%) and production rates
(±10% and ±50%) on the overall cultivation time, including making the inoculum
train cultures; the final production phase, the volumetric titer in that bioreactor
and the ratio of both, defined as overall process productivity. We showed thus
unequivocally that growth rates have a higher impact (up to three times) on overall
process productivity and for product output per year, whereas cells with higher
productivity can potentially generate higher product concentrations in the production
vessel.
author:
- first_name: Tanja
full_name: Hernández Rodriguez, Tanja
id: '52466'
last_name: Hernández Rodriguez
- first_name: Sophie
full_name: Morerod, Sophie
last_name: Morerod
- first_name: Ralf
full_name: Pörtner, Ralf
last_name: Pörtner
- first_name: Florian M.
full_name: Wurm, Florian M.
last_name: Wurm
- first_name: Björn
full_name: Frahm, Björn
id: '45666'
last_name: Frahm
citation:
ama: 'Hernández Rodriguez T, Morerod S, Pörtner R, Wurm FM, Frahm B. Considerations
of the impacts of cell-specific growth and production rate on clone selection
– a simulation study. In: Bioprocess Systems Engineering Applications in Pharmaceutical
Manufacturing. Vol special issue. Processes : open access journal . MDPI;
2021:49-74. doi:10.3390/pr9060964'
apa: 'Hernández Rodriguez, T., Morerod, S., Pörtner, R., Wurm, F. M., & Frahm,
B. (2021). Considerations of the impacts of cell-specific growth and production
rate on clone selection – a simulation study. In Bioprocess Systems Engineering
Applications in Pharmaceutical Manufacturing: Vol. special issue (pp. 49–74).
MDPI. https://doi.org/10.3390/pr9060964'
bjps: 'Hernández Rodriguez T et al. (2021) Considerations of the Impacts
of Cell-Specific Growth and Production Rate on Clone Selection – a Simulation
Study. Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing,
vol. special issue. Basel: MDPI, pp. 49–74.'
chicago: 'Hernández Rodriguez, Tanja, Sophie Morerod, Ralf Pörtner, Florian M. Wurm,
and Björn Frahm. “Considerations of the Impacts of Cell-Specific Growth and Production
Rate on Clone Selection – a Simulation Study.” In Bioprocess Systems Engineering
Applications in Pharmaceutical Manufacturing, special issue:49–74. Processes :
Open Access Journal . Basel: MDPI, 2021. https://doi.org/10.3390/pr9060964.'
chicago-de: 'Hernández Rodriguez, Tanja, Sophie Morerod, Ralf Pörtner, Florian M.
Wurm und Björn Frahm. 2021. Considerations of the impacts of cell-specific growth
and production rate on clone selection – a simulation study. In: Bioprocess
Systems Engineering Applications in Pharmaceutical Manufacturing, special
issue:49–74. Processes : open access journal . Basel: MDPI. doi:10.3390/pr9060964,
.'
din1505-2-1: 'Hernández Rodriguez, Tanja
; Morerod, Sophie ; Pörtner,
Ralf ; Wurm, Florian M. ;
Frahm, Björn: Considerations of
the impacts of cell-specific growth and production rate on clone selection – a
simulation study. In: Bioprocess Systems Engineering Applications in Pharmaceutical
Manufacturing, Processes : open access journal . Bd. special issue.
Basel : MDPI, 2021, S. 49–74'
havard: 'T. Hernández Rodriguez, S. Morerod, R. Pörtner, F.M. Wurm, B. Frahm, Considerations
of the impacts of cell-specific growth and production rate on clone selection
– a simulation study, in: Bioprocess Systems Engineering Applications in Pharmaceutical
Manufacturing, MDPI, Basel, 2021: pp. 49–74.'
ieee: 'T. Hernández Rodriguez, S. Morerod, R. Pörtner, F. M. Wurm, and B. Frahm,
“Considerations of the impacts of cell-specific growth and production rate on
clone selection – a simulation study,” in Bioprocess Systems Engineering Applications
in Pharmaceutical Manufacturing, vol. special issue, Basel: MDPI, 2021, pp.
49–74. doi: 10.3390/pr9060964.'
mla: Hernández Rodriguez, Tanja, et al. “Considerations of the Impacts of Cell-Specific
Growth and Production Rate on Clone Selection – a Simulation Study.” Bioprocess
Systems Engineering Applications in Pharmaceutical Manufacturing, vol. special
issue, MDPI, 2021, pp. 49–74, https://doi.org/10.3390/pr9060964.
short: 'T. Hernández Rodriguez, S. Morerod, R. Pörtner, F.M. Wurm, B. Frahm, in:
Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing, MDPI,
Basel, 2021, pp. 49–74.'
ufg: 'Hernández Rodriguez, Tanja u. a.: Considerations of the impacts of
cell-specific growth and production rate on clone selection – a simulation study,
in: o. Hg.: Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing,
Band special issue, Basel 2021 (Processes : open access journal ), S.
49–74.'
van: 'Hernández Rodriguez T, Morerod S, Pörtner R, Wurm FM, Frahm B. Considerations
of the impacts of cell-specific growth and production rate on clone selection
– a simulation study. In: Bioprocess Systems Engineering Applications in Pharmaceutical
Manufacturing. Basel: MDPI; 2021. p. 49–74. (Processes : open access journal ;
vol. special issue).'
date_created: 2022-05-05T12:55:52Z
date_updated: 2023-08-16T09:17:50Z
department:
- _id: DEP4021
doi: 10.3390/pr9060964
keyword:
- clonal cell population
- phenotypic diversity
- inoculum train
- uncertainty-based
- cell culture model
- biopharmaceutical manufacturing
language:
- iso: eng
page: 49-74
place: Basel
publication: Bioprocess Systems Engineering Applications in Pharmaceutical Manufacturing
publication_identifier:
eisbn:
- 978-3-0365-5209-5
isbn:
- 978-3-0365-5210-1
issn:
- '2227-9717 '
publication_status: published
publisher: MDPI
quality_controlled: '1'
series_title: 'Processes : open access journal '
status: public
title: Considerations of the impacts of cell-specific growth and production rate on
clone selection – a simulation study
type: book_chapter
user_id: '83781'
volume: special issue
year: '2021'
...
---
_id: '6910'
abstract:
- lang: eng
text: "AI is on the rise. Powerful cloud platforms and networked software components
can perform increasingly complex data evaluations and simulations. Recent research
and development projects1 show how great the potential of artificial intelligence
is for urban planning. However, despite the impressive, technical possibilities,
it currently remains unclear how planning stakeholders and the affected population
can be meaningfully involved in the intelligent processes of the \"black box\".
The authors are of the opinion that sustainable urban development planning not
only requires acceptance of the spatial planning result, as has been the case
up to now, but also requires acceptance of the increasingly digitally supported
planning process. For this reason, it must also be possible for laypersons to
understand the digital analysis and evaluation processes and to comprehend their
relevance and spatial interactions. Consequently, simulations must not only run
in the computers of the respective planning or engineering offices, but require
a simple, haptic analog translation that can also be used in participation processes
as already shown in the CityScope projects2. \r\nFor this project, the big revitalization
project of Deutzer Hafen in Cologne to a future district with more than 9.500
daily users is used as a case study in building a decision support system for
urban planning. It is composed of three parts: an agent-based model, a tangible
user interface and a synthetic population. The project enables users to get in
touch with an agent-based model (ABM) without any knowledge in coding or even
interacting with computers. It connects physical objects to digital information.
Based on the theories of Castiglione et.al.3 , Gehl4 , Shannon5 and Jacobs6 this
project shows how to use an artificial and analog simulation model to measure
the urban vitality of the public spaces in the district, based on the activity
and travelling patterns of the population. This is done by testing different scenarios
in which we change interactive parameters of the model: the use of the buildings
and the demographics of the population. We can then determine which scenarios
benefit the most life in the public spaces of the district, by finding areas of
interest or problematic ones. "
author:
- first_name: Amanda
full_name: Barbosa Jardim, Amanda
id: '76917'
last_name: Barbosa Jardim
- first_name: Maximilian
full_name: Müh, Maximilian
id: '74260'
last_name: Müh
- first_name: Axel
full_name: Häusler, Axel
id: '61520'
last_name: Häusler
orcid: 0009-0001-8565-8199
- first_name: Andrea
full_name: Kondziela, Andrea
id: '81431'
last_name: Kondziela
citation:
ama: 'Barbosa Jardim A, Müh M, Häusler A, Kondziela A. Synthetic and Tangible Agents
for an Activity-based Urban Planning Tool. In: Schrenk M, Popovich VV, Zeile P,
et al., eds. REAL CORP 2021: Cities 20.50, Creating Habitats for the 3rd
Millennium, Smart - Sustainable - Climate Neutral : Proceedings of 26th International
Conference on Urban Planning, Regional Development and Information Society.
CORP - Competence Center of Urban and Regional Planning; 2021. doi:10.48494/REALCORP2021.1049'
apa: 'Barbosa Jardim, A., Müh, M., Häusler, A., & Kondziela, A. (2021). Synthetic
and Tangible Agents for an Activity-based Urban Planning Tool. In M. Schrenk,
V. V. Popovich, P. Zeile, P. Elisei, C. Beyer, J. Ryser, G. Stöglehner, &
CORP – Competence Center of Urban and Regional Planning (Eds.), REAL CORP
2021: Cities 20.50, creating habitats for the 3rd millennium, smart - sustainable
- climate neutral : proceedings of 26th International Conference on Urban Planning,
Regional Development and Information Society. CORP - Competence Center of
Urban and Regional Planning. https://doi.org/10.48494/REALCORP2021.1049'
bjps: 'Barbosa Jardim A et al. (2021) Synthetic and Tangible Agents
for an Activity-Based Urban Planning Tool. In Schrenk M et al. (eds), REAL
CORP 2021: Cities 20.50, Creating Habitats for the 3rd Millennium, Smart - Sustainable
- Climate Neutral : Proceedings of 26th International Conference on Urban Planning,
Regional Development and Information Society. Wien: CORP - Competence Center
of Urban and Regional Planning.'
chicago: 'Barbosa Jardim, Amanda, Maximilian Müh, Axel Häusler, and Andrea Kondziela.
“Synthetic and Tangible Agents for an Activity-Based Urban Planning Tool.” In
REAL CORP 2021: Cities 20.50, Creating Habitats for the 3rd Millennium, Smart
- Sustainable - Climate Neutral : Proceedings of 26th International Conference
on Urban Planning, Regional Development and Information Society, edited by
Manfred Schrenk, Vasily V. Popovich, Peter Zeile, Pietro Elisei, Clemens Beyer,
Judith Ryser, Gernot Stöglehner, and CORP – Competence Center of Urban and Regional
Planning. Wien: CORP - Competence Center of Urban and Regional Planning, 2021.
https://doi.org/10.48494/REALCORP2021.1049.'
chicago-de: 'Barbosa Jardim, Amanda, Maximilian Müh, Axel Häusler und Andrea Kondziela.
2021. Synthetic and Tangible Agents for an Activity-based Urban Planning Tool.
In: REAL CORP 2021: Cities 20.50, creating habitats for the 3rd millennium,
smart - sustainable - climate neutral : proceedings of 26th International Conference
on Urban Planning, Regional Development and Information Society, hg. von Manfred
Schrenk, Vasily V. Popovich, Peter Zeile, Pietro Elisei, Clemens Beyer, Judith
Ryser, Gernot Stöglehner, und CORP – Competence Center of Urban and Regional Planning.
Wien: CORP - Competence Center of Urban and Regional Planning. doi:10.48494/REALCORP2021.1049,
.'
din1505-2-1: 'Barbosa Jardim, Amanda
; Müh, Maximilian ; Häusler,
Axel ; Kondziela, Andrea:
Synthetic and Tangible Agents for an Activity-based Urban Planning Tool. In: Schrenk, M. ; Popovich,
V. V. ; Zeile, P. ; Elisei, P. ; Beyer,
C. ; Ryser, J. ; Stöglehner,
G. ; CORP – Competence Center of
Urban and Regional Planning (Hrsg.): REAL CORP 2021: Cities 20.50,
creating habitats for the 3rd millennium, smart - sustainable - climate neutral :
proceedings of 26th International Conference on Urban Planning, Regional Development
and Information Society. Wien : CORP - Competence Center of Urban and Regional
Planning, 2021'
havard: 'A. Barbosa Jardim, M. Müh, A. Häusler, A. Kondziela, Synthetic and Tangible
Agents for an Activity-based Urban Planning Tool, in: M. Schrenk, V.V. Popovich,
P. Zeile, P. Elisei, C. Beyer, J. Ryser, G. Stöglehner, CORP – Competence Center
of Urban and Regional Planning (Eds.), REAL CORP 2021: Cities 20.50, Creating
Habitats for the 3rd Millennium, Smart - Sustainable - Climate Neutral : Proceedings
of 26th International Conference on Urban Planning, Regional Development and Information
Society, CORP - Competence Center of Urban and Regional Planning, Wien, 2021.'
ieee: 'A. Barbosa Jardim, M. Müh, A. Häusler, and A. Kondziela, “Synthetic and Tangible
Agents for an Activity-based Urban Planning Tool,” in REAL CORP 2021: Cities
20.50, creating habitats for the 3rd millennium, smart - sustainable - climate
neutral : proceedings of 26th International Conference on Urban Planning, Regional
Development and Information Society, M. Schrenk, V. V. Popovich, P. Zeile,
P. Elisei, C. Beyer, J. Ryser, G. Stöglehner, and CORP – Competence Center of
Urban and Regional Planning, Eds. Wien: CORP - Competence Center of Urban and
Regional Planning, 2021. doi: 10.48494/REALCORP2021.1049.'
mla: 'Barbosa Jardim, Amanda, et al. “Synthetic and Tangible Agents for an Activity-Based
Urban Planning Tool.” REAL CORP 2021: Cities 20.50, Creating Habitats for
the 3rd Millennium, Smart - Sustainable - Climate Neutral : Proceedings of 26th
International Conference on Urban Planning, Regional Development and Information
Society, edited by Manfred Schrenk et al., CORP - Competence Center of Urban
and Regional Planning, 2021, https://doi.org/10.48494/REALCORP2021.1049.'
short: 'A. Barbosa Jardim, M. Müh, A. Häusler, A. Kondziela, in: M. Schrenk, V.V.
Popovich, P. Zeile, P. Elisei, C. Beyer, J. Ryser, G. Stöglehner, CORP – Competence
Center of Urban and Regional Planning (Eds.), REAL CORP 2021: Cities 20.50,
Creating Habitats for the 3rd Millennium, Smart - Sustainable - Climate Neutral :
Proceedings of 26th International Conference on Urban Planning, Regional Development
and Information Society, CORP - Competence Center of Urban and Regional Planning,
Wien, 2021.'
ufg: 'Barbosa Jardim, Amanda u. a.: Synthetic and Tangible Agents for an
Activity-based Urban Planning Tool, in: Schrenk, Manfred u. a. (Hgg.):
REAL CORP 2021: Cities 20.50, creating habitats for the 3rd millennium, smart
- sustainable - climate neutral : proceedings of 26th International Conference
on Urban Planning, Regional Development and Information Society, Wien 2021.'
van: 'Barbosa Jardim A, Müh M, Häusler A, Kondziela A. Synthetic and Tangible Agents
for an Activity-based Urban Planning Tool. In: Schrenk M, Popovich VV, Zeile P,
Elisei P, Beyer C, Ryser J, et al., editors. REAL CORP 2021: Cities 2050, creating
habitats for the 3rd millennium, smart - sustainable - climate neutral : proceedings
of 26th International Conference on Urban Planning, Regional Development and Information
Society. Wien: CORP - Competence Center of Urban and Regional Planning; 2021.'
conference:
end_date: 2021-10-10
location: Wien
name: 'REAL CORP - International Conference on Urban Planning and Regional Development
in the Information Society '
start_date: 2021-10-07
corporate_editor:
- CORP – Competence Center of Urban and Regional Planning
date_created: 2021-12-16T10:57:54Z
date_updated: 2024-12-04T12:57:10Z
department:
- _id: DEP1055
- _id: DEP1028
doi: 10.48494/REALCORP2021.1049
editor:
- first_name: Manfred
full_name: Schrenk, Manfred
last_name: Schrenk
- first_name: Vasily V.
full_name: Popovich, Vasily V.
last_name: Popovich
- first_name: Peter
full_name: Zeile, Peter
last_name: Zeile
- first_name: Pietro
full_name: Elisei, Pietro
last_name: Elisei
- first_name: Clemens
full_name: Beyer, Clemens
last_name: Beyer
- first_name: Judith
full_name: Ryser, Judith
last_name: Ryser
- first_name: Gernot
full_name: Stöglehner, Gernot
last_name: Stöglehner
keyword:
- mart Cities
- Agent-based modelling
- KI/AI
- Participation
- Tangible Data
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.corp.at/archive/CORP2021_49.pdf
oa: '1'
place: Wien
publication: "\t REAL CORP 2021: Cities 20.50, creating habitats for the 3rd millennium,
smart - sustainable - climate neutral : proceedings of 26th International Conference
on Urban Planning, Regional Development and Information Society"
publication_identifier:
isbn:
- 978-3-9504945-0-1
publication_status: published
publisher: CORP - Competence Center of Urban and Regional Planning
quality_controlled: '1'
related_material:
link:
- relation: original
url: https://www.corp.at/archive/CORP2021_49.pdf
status: public
title: Synthetic and Tangible Agents for an Activity-based Urban Planning Tool
type: book_chapter
user_id: '83781'
year: '2021'
...
---
_id: '3349'
abstract:
- lang: eng
text: "Model-based concepts and simulation techniques in combination with digital
tools emerge as a key to explore the full potential of biopharmaceutical production
processes, which contain several challenging development and process steps. One
of these steps is the time- and cost-intensive cell proliferation process (also
called seed train) to increase cell number from cell thawing up to production
scale. Challenges like complex cell metabolism, batch-to-batch variation, variabilities
in cell behavior, and influences of changes in cultivation conditions necessitate
adequate digital solutions to provide information about the current and near future
process state to derive correct process decisions.\r\nFor this purpose digital
seed train twins have proved to be efficient, which digitally display the time-dependent
behavior of important process variables based on mathematical models, strategies,
and adaption procedures.\r\nThis chapter will outline the needs for digitalization
of seed trains, the construction of a digital seed train twin, the role of parameter
estimation, and different statistical methods within this context, which are applicable
to several problems in the field of bioprocessing. The results of a case study
are presented to illustrate a Bayesian approach for parameter estimation and prediction
of an industrial cell culture seed train for seed train digitalization."
author:
- first_name: Tanja
full_name: Hernández Rodriguez, Tanja
id: '52466'
last_name: Hernández Rodriguez
- first_name: Björn
full_name: Frahm, Björn
id: '45666'
last_name: Frahm
citation:
ama: 'Hernández Rodriguez T, Frahm B. Digital Seed Train Twins and Statistical Methods.
In: Herwig C, Pörtner R, Möller J, eds. Digital Twins Tools and Concepts for
Smart Biomanufacturing. Vol 176. Advances in Biochemical Engineering/Biotechnology.
Springer; 2021:97-131. doi:https://doi.org/10.1007/10_2020_137'
apa: Hernández Rodriguez, T., & Frahm, B. (2021). Digital Seed Train Twins and
Statistical Methods. In C. Herwig, R. Pörtner, & J. Möller (Eds.), Digital
Twins Tools and Concepts for Smart Biomanufacturing (Vol. 176, pp. 97–131).
Springer. https://doi.org/10.1007/10_2020_137
bjps: 'Hernández Rodriguez T and Frahm B (2021) Digital Seed Train Twins
and Statistical Methods. In Herwig C, Pörtner R and Möller J (eds), Digital
Twins Tools and Concepts for Smart Biomanufacturing, vol. 176. Berlin, Heidelberg:
Springer, pp. 97–131.'
chicago: 'Hernández Rodriguez, Tanja, and Björn Frahm. “Digital Seed Train Twins
and Statistical Methods.” In Digital Twins Tools and Concepts for Smart Biomanufacturing,
edited by Christoph Herwig, Ralf Pörtner, and Johannes Möller, 176:97–131.
Advances in Biochemical Engineering/Biotechnology. Berlin, Heidelberg: Springer,
2021. https://doi.org/10.1007/10_2020_137.'
chicago-de: 'Hernández Rodriguez, Tanja und Björn Frahm. 2021. Digital Seed Train
Twins and Statistical Methods. In: Digital Twins Tools and Concepts for Smart
Biomanufacturing, hg. von Christoph Herwig, Ralf Pörtner, und Johannes Möller,
176:97–131. Advances in Biochemical Engineering/Biotechnology. Berlin, Heidelberg:
Springer. doi:https://doi.org/10.1007/10_2020_137,
.'
din1505-2-1: 'Hernández Rodriguez, Tanja
; Frahm, Björn: Digital Seed Train
Twins and Statistical Methods. In: Herwig,
C. ; Pörtner, R. ; Möller, J. (Hrsg.): Digital Twins Tools
and Concepts for Smart Biomanufacturing, Advances in Biochemical Engineering/Biotechnology.
Bd. 176. Berlin, Heidelberg : Springer, 2021, S. 97–131'
havard: 'T. Hernández Rodriguez, B. Frahm, Digital Seed Train Twins and Statistical
Methods, in: C. Herwig, R. Pörtner, J. Möller (Eds.), Digital Twins Tools and
Concepts for Smart Biomanufacturing, Springer, Berlin, Heidelberg, 2021: pp. 97–131.'
ieee: 'T. Hernández Rodriguez and B. Frahm, “Digital Seed Train Twins and Statistical
Methods,” in Digital Twins Tools and Concepts for Smart Biomanufacturing,
vol. 176, C. Herwig, R. Pörtner, and J. Möller, Eds. Berlin, Heidelberg: Springer,
2021, pp. 97–131. doi: https://doi.org/10.1007/10_2020_137.'
mla: Hernández Rodriguez, Tanja, and Björn Frahm. “Digital Seed Train Twins and
Statistical Methods.” Digital Twins Tools and Concepts for Smart Biomanufacturing,
edited by Christoph Herwig et al., vol. 176, Springer, 2021, pp. 97–131, https://doi.org/10.1007/10_2020_137.
short: 'T. Hernández Rodriguez, B. Frahm, in: C. Herwig, R. Pörtner, J. Möller (Eds.),
Digital Twins Tools and Concepts for Smart Biomanufacturing, Springer, Berlin,
Heidelberg, 2021, pp. 97–131.'
ufg: 'Hernández Rodriguez, Tanja/Frahm, Björn: Digital Seed Train Twins and
Statistical Methods, in: Herwig, Christoph/Pörtner, Ralf/Möller, Johannes (Hgg.):
Digital Twins Tools and Concepts for Smart Biomanufacturing, Bd. 176, Berlin,
Heidelberg 2021 (Advances in Biochemical Engineering/Biotechnology), S. 97–131.'
van: 'Hernández Rodriguez T, Frahm B. Digital Seed Train Twins and Statistical Methods.
In: Herwig C, Pörtner R, Möller J, editors. Digital Twins Tools and Concepts for
Smart Biomanufacturing. Berlin, Heidelberg: Springer; 2021. p. 97–131. (Advances
in Biochemical Engineering/Biotechnology; vol. 176).'
date_created: 2020-08-19T07:14:11Z
date_updated: 2023-08-16T06:48:35Z
department:
- _id: DEP4021
doi: https://doi.org/10.1007/10_2020_137
editor:
- first_name: 'Christoph '
full_name: 'Herwig, Christoph '
last_name: Herwig
- first_name: 'Ralf '
full_name: 'Pörtner, Ralf '
last_name: Pörtner
- first_name: 'Johannes '
full_name: 'Möller, Johannes '
last_name: Möller
intvolume: ' 176'
keyword:
- Bayes
- Digital twin
- Parameter estimation
- Seed train
- Uncertainty
language:
- iso: eng
page: 97–131
place: Berlin, Heidelberg
publication: Digital Twins Tools and Concepts for Smart Biomanufacturing
publication_identifier:
eisbn:
- 978-3-030-71660-8
eissn:
- 1616-8542
isbn:
- 978-3-030-71659-2
issn:
- 0724-6145
publication_status: published
publisher: Springer
quality_controlled: '1'
series_title: Advances in Biochemical Engineering/Biotechnology
status: public
title: Digital Seed Train Twins and Statistical Methods
type: book_chapter
user_id: '83781'
volume: 176
year: '2021'
...
---
_id: '4100'
author:
- first_name: Tobias
full_name: Schmohl, Tobias
id: '71782'
last_name: Schmohl
orcid: https://orcid.org/0000-0002-7043-5582
- first_name: Susanne
full_name: Schwickert, Susanne
id: '27269'
last_name: Schwickert
- first_name: Oliver
full_name: Glahn, Oliver
id: '76018'
last_name: Glahn
citation:
ama: 'Schmohl T, Schwickert S, Glahn O. Conceptual Design of an AI-Based Learning
Assistant . Bologna: Libreriauniversitaria.it; 2020:309-313. doi:10.26352/E618_2384-9509'
apa: 'Schmohl, T., Schwickert, S., & Glahn, O. (2020). Conceptual Design
of an AI-Based Learning Assistant . The Future of Education (pp. 309–313).
Bologna: Libreriauniversitaria.it. https://doi.org/10.26352/E618_2384-9509'
bjps: 'Schmohl T, Schwickert S and Glahn O (2020) Conceptual Design of
an AI-Based Learning Assistant . Bologna: Libreriauniversitaria.it.'
chicago: 'Schmohl, Tobias, Susanne Schwickert, and Oliver Glahn. Conceptual Design
of an AI-Based Learning Assistant . The Future of Education. Bologna:
Libreriauniversitaria.it, 2020. https://doi.org/10.26352/E618_2384-9509.'
chicago-de: 'Schmohl, Tobias, Susanne Schwickert und Oliver Glahn. 2020. Conceptual
Design of an AI-Based Learning Assistant . The Future of Education.
Bologna: Libreriauniversitaria.it. doi:10.26352/E618_2384-9509,
.'
din1505-2-1: 'Schmohl, Tobias ; Schwickert, Susanne ; Glahn,
Oliver: Conceptual Design of an AI-Based Learning Assistant . Bologna :
Libreriauniversitaria.it, 2020'
havard: T. Schmohl, S. Schwickert, O. Glahn, Conceptual Design of an AI-Based Learning
Assistant , Libreriauniversitaria.it, Bologna, 2020.
ieee: 'T. Schmohl, S. Schwickert, and O. Glahn, Conceptual Design of an AI-Based
Learning Assistant . Bologna: Libreriauniversitaria.it, 2020, pp. 309–313.'
mla: Schmohl, Tobias, et al. “Conceptual Design of an AI-Based Learning Assistant
.” The Future of Education, Libreriauniversitaria.it, 2020, pp. 309–13,
doi:10.26352/E618_2384-9509.
short: T. Schmohl, S. Schwickert, O. Glahn, Conceptual Design of an AI-Based Learning
Assistant , Libreriauniversitaria.it, Bologna, 2020.
ufg: 'Schmohl, Tobias et. al. (2020): Conceptual Design of an AI-Based Learning
Assistant , Bologna.'
van: 'Schmohl T, Schwickert S, Glahn O. Conceptual Design of an AI-Based Learning
Assistant . The Future of Education. Bologna: Libreriauniversitaria.it; 2020.'
conference:
end_date: 2020-07-19
location: Florenz
name: ' 10 th International Conference The Future of Education '
start_date: 2020-07-18
date_created: 2020-11-27T08:28:18Z
date_updated: 2023-03-15T13:49:50Z
department:
- _id: DEP1022
- _id: DEP2000
doi: 10.26352/E618_2384-9509
keyword:
- Artificial Intelligence
- intelligent tutoring system
- reflection
- project-based learning
- online-learning
- interactive video
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.academia.edu/43653971/The_Future_of_Education_Conference_Proceedings_2020
oa: '1'
page: 309-313
place: Bologna
publication: The Future of Education
publication_identifier:
eisbn:
- 978-88-85813-87-8
publication_status: published
publisher: Libreriauniversitaria.it
quality_controlled: '1'
status: public
title: 'Conceptual Design of an AI-Based Learning Assistant '
type: conference_editor_article
user_id: '79260'
year: 2020
...
---
_id: '4312'
abstract:
- lang: eng
text: Computer-aided assistance systems are entering the world of work and production.
Such systems utilize augmented- and virtual-reality for operator training and
live guidance as well as mobile maintenance and support. This is particularly
important in the modern production reality of ever-changing products and `lot
size one' customization of production.This paper focuses on the application of
machine learning approach to extend the functionality of assistance systems. Machine
learning provides tools to analyse large amounts of data and extract meaningful
information. The goal here is to recognize the movement of an operator which would
enable automatic display of instructions relevant to them.We present the challenges
facing machine learning applications in human-centered assistance systems and
a framework to assess machine learning approaches feasible for this scenario.
The approach is assessed on a historical data set and then deployed in a work
station for live testing. The post-hoc, or historical, analysis yields promising
results. The ad-hoc, or live, analysis is a complex task and the results are affected
by multiple factors, most of which are introduced by the human influence.The contribution
of this paper is an approach to adapt state- of-the-art machine learning to operator
movement recognition with a special focus on approaches to spatial time series
data pre-processing. Presented experiment results validate the approach and show
that it performs well in a real-world scenario.
author:
- first_name: Marta
full_name: Fullen, Marta
last_name: Fullen
- first_name: Alexander
full_name: Maier, Alexander
id: '11158'
last_name: Maier
- first_name: Arthur
full_name: Nazarenko, Arthur
last_name: Nazarenko
- first_name: Sascha
full_name: Jenderny, Sascha
last_name: Jenderny
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Fullen M, Maier A, Nazarenko A, Jenderny S, Röcker C. Machine Learning for
Assistance Systems: Pattern-Based Approach to Online Step Recognition. In: IEEE,
ed. 2019 IEEE 17th International Conference on Industrial Informatics (INDIN).
Piscataway, NJ : IEEE; 2019:296-302. doi:10.1109/INDIN41052.2019.8972122'
apa: 'Fullen, M., Maier, A., Nazarenko, A., Jenderny, S., & Röcker, C. (2019).
Machine Learning for Assistance Systems: Pattern-Based Approach to Online Step
Recognition. In IEEE (Ed.), 2019 IEEE 17th International Conference on Industrial
Informatics (INDIN) (pp. 296–302). Piscataway, NJ : IEEE. https://doi.org/10.1109/INDIN41052.2019.8972122'
bjps: 'Fullen M et al. (2019) Machine Learning for Assistance Systems:
Pattern-Based Approach to Online Step Recognition. In IEEE (ed.), 2019 IEEE
17th International Conference on Industrial Informatics (INDIN). Piscataway,
NJ : IEEE, pp. 296–302.'
chicago: 'Fullen, Marta, Alexander Maier, Arthur Nazarenko, Sascha Jenderny, and
Carsten Röcker. “Machine Learning for Assistance Systems: Pattern-Based Approach
to Online Step Recognition.” In 2019 IEEE 17th International Conference on
Industrial Informatics (INDIN), edited by IEEE, 296–302. Piscataway, NJ :
IEEE, 2019. https://doi.org/10.1109/INDIN41052.2019.8972122.'
chicago-de: 'Fullen, Marta, Alexander Maier, Arthur Nazarenko, Sascha Jenderny und
Carsten Röcker. 2019. Machine Learning for Assistance Systems: Pattern-Based Approach
to Online Step Recognition. In: 2019 IEEE 17th International Conference on
Industrial Informatics (INDIN), hg. von IEEE, 296–302. Piscataway, NJ : IEEE.
doi:10.1109/INDIN41052.2019.8972122,
.'
din1505-2-1: 'Fullen, Marta ; Maier, Alexander ; Nazarenko,
Arthur ; Jenderny, Sascha
; Röcker, Carsten: Machine Learning
for Assistance Systems: Pattern-Based Approach to Online Step Recognition. In:
IEEE (Hrsg.): 2019 IEEE 17th
International Conference on Industrial Informatics (INDIN). Piscataway, NJ
: IEEE, 2019, S. 296–302'
havard: 'M. Fullen, A. Maier, A. Nazarenko, S. Jenderny, C. Röcker, Machine Learning
for Assistance Systems: Pattern-Based Approach to Online Step Recognition, in:
IEEE (Ed.), 2019 IEEE 17th International Conference on Industrial Informatics
(INDIN), IEEE, Piscataway, NJ , 2019: pp. 296–302.'
ieee: 'M. Fullen, A. Maier, A. Nazarenko, S. Jenderny, and C. Röcker, “Machine Learning
for Assistance Systems: Pattern-Based Approach to Online Step Recognition,” in
2019 IEEE 17th International Conference on Industrial Informatics (INDIN),
IEEE, Ed. Piscataway, NJ : IEEE, 2019, pp. 296–302.'
mla: 'Fullen, Marta, et al. “Machine Learning for Assistance Systems: Pattern-Based
Approach to Online Step Recognition.” 2019 IEEE 17th International Conference
on Industrial Informatics (INDIN), edited by IEEE, IEEE, 2019, pp. 296–302,
doi:10.1109/INDIN41052.2019.8972122.'
short: 'M. Fullen, A. Maier, A. Nazarenko, S. Jenderny, C. Röcker, in: IEEE (Ed.),
2019 IEEE 17th International Conference on Industrial Informatics (INDIN), IEEE,
Piscataway, NJ , 2019, pp. 296–302.'
ufg: 'Fullen, Marta et. al. (2019): Machine Learning for Assistance Systems:
Pattern-Based Approach to Online Step Recognition, in: IEEE (Hg.): 2019 IEEE
17th International Conference on Industrial Informatics (INDIN), Piscataway,
NJ , S. 296–302.'
van: 'Fullen M, Maier A, Nazarenko A, Jenderny S, Röcker C. Machine Learning for
Assistance Systems: Pattern-Based Approach to Online Step Recognition. In: IEEE,
editor. 2019 IEEE 17th International Conference on Industrial Informatics (INDIN).
Piscataway, NJ : IEEE; 2019. p. 296–302.'
conference:
end_date: 2019-07-25
location: Helsinki, Finland,
name: 17th International Conference on Industrial Informatics (INDIN)
start_date: 2019-07-22
corporate_editor:
- IEEE
date_created: 2021-01-06T13:59:10Z
date_updated: 2023-03-15T13:49:51Z
department:
- _id: DEP5023
doi: 10.1109/INDIN41052.2019.8972122
keyword:
- augmented reality
- computer based training
- data handling
- industrial training
- learning (artificial intelligence)
- time series
language:
- iso: eng
page: 296 - 302
place: 'Piscataway, NJ '
publication: 2019 IEEE 17th International Conference on Industrial Informatics (INDIN)
publication_identifier:
isbn:
- 978-1-7281-2927-3
issn:
- 2378-363X
publication_status: published
publisher: IEEE
status: public
title: 'Machine Learning for Assistance Systems: Pattern-Based Approach to Online
Step Recognition'
type: book_chapter
user_id: '15514'
year: 2019
...
---
_id: '4313'
abstract:
- lang: eng
text: This paper reports on a study (N = 471) exploring the acceptance of video-based
home monitoring systems as well as criteria influencing their acceptance. While
most participants stated that they would home monitoring solutions under certain
conditions, the majority of participants is rather reluctant to use systems that
transmit visual and acoustical information to remote medical personnel. Besides
age, most user characteristics, which played important roles in technology acceptance
research for many years, do not appear to be decisive factors for the acceptance
of electronic home-monitoring services.
author:
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Röcker C. Exploring the Acceptance of Video-Based Medical Support. In: Karwowski
W, Ahram T, eds. Intelligent Human Systems Integration 2019. Vol 903. Advances
in Intelligent Systems and Computing. Cham: Springer; 2019:551-556. doi:10.1007/978-3-030-11051-2_83'
apa: 'Röcker, C. (2019). Exploring the Acceptance of Video-Based Medical Support.
In W. Karwowski & T. Ahram (Eds.), Intelligent Human Systems Integration
2019 (Vol. 903, pp. 551–556). Cham: Springer. https://doi.org/10.1007/978-3-030-11051-2_83'
bjps: 'Röcker C (2019) Exploring the Acceptance of Video-Based Medical Support.
In Karwowski W and Ahram T (eds), Intelligent Human Systems Integration 2019,
vol. 903. Cham: Springer, pp. 551–556.'
chicago: 'Röcker, Carsten. “Exploring the Acceptance of Video-Based Medical Support.”
In Intelligent Human Systems Integration 2019, edited by Waldemar Karwowski
and Tareq Ahram, 903:551–56. Advances in Intelligent Systems and Computing. Cham:
Springer, 2019. https://doi.org/10.1007/978-3-030-11051-2_83.'
chicago-de: 'Röcker, Carsten. 2019. Exploring the Acceptance of Video-Based Medical
Support. In: Intelligent Human Systems Integration 2019, hg. von Waldemar
Karwowski und Tareq Ahram, 903:551–556. Advances in Intelligent Systems and Computing.
Cham: Springer. doi:10.1007/978-3-030-11051-2_83,
.'
din1505-2-1: 'Röcker, Carsten: Exploring
the Acceptance of Video-Based Medical Support. In: Karwowski,
W. ; Ahram, T. (Hrsg.): Intelligent
Human Systems Integration 2019, Advances in Intelligent Systems and Computing.
Bd. 903. Cham : Springer, 2019, S. 551–556'
havard: 'C. Röcker, Exploring the Acceptance of Video-Based Medical Support, in:
W. Karwowski, T. Ahram (Eds.), Intelligent Human Systems Integration 2019, Springer,
Cham, 2019: pp. 551–556.'
ieee: 'C. Röcker, “Exploring the Acceptance of Video-Based Medical Support,” in
Intelligent Human Systems Integration 2019, vol. 903, W. Karwowski and
T. Ahram, Eds. Cham: Springer, 2019, pp. 551–556.'
mla: Röcker, Carsten. “Exploring the Acceptance of Video-Based Medical Support.”
Intelligent Human Systems Integration 2019, edited by Waldemar Karwowski
and Tareq Ahram, vol. 903, Springer, 2019, pp. 551–56, doi:10.1007/978-3-030-11051-2_83.
short: 'C. Röcker, in: W. Karwowski, T. Ahram (Eds.), Intelligent Human Systems
Integration 2019, Springer, Cham, 2019, pp. 551–556.'
ufg: 'Röcker, Carsten (2019): Exploring the Acceptance of Video-Based Medical
Support, in: Waldemar Karwowski/Tareq Ahram (Hgg.): Intelligent Human Systems
Integration 2019 (= Advances in Intelligent Systems and Computing 903),
Cham, S. 551–556.'
van: 'Röcker C. Exploring the Acceptance of Video-Based Medical Support. In: Karwowski
W, Ahram T, editors. Intelligent Human Systems Integration 2019. Cham: Springer;
2019. p. 551–6. ( Advances in Intelligent Systems and Computing; vol. 903).'
conference:
end_date: 2019-0210
location: San Diego, California, USA
name: '2nd International Conference on Intelligent Human Systems Integration (IHSI
2019): Integrating People and Intelligent Systems'
start_date: 2019-02-07
date_created: 2021-01-06T13:59:11Z
date_updated: 2023-03-15T13:49:51Z
department:
- _id: DEP5023
doi: 10.1007/978-3-030-11051-2_83
editor:
- first_name: Waldemar
full_name: Karwowski, Waldemar
last_name: Karwowski
- first_name: Tareq
full_name: Ahram, Tareq
last_name: Ahram
intvolume: ' 903'
keyword:
- Active assisted living
- Electronic homecare
- 'e-health : Video-based monitoring'
- Technology acceptance
- User-centered design
- Study
language:
- iso: eng
page: 551 - 556
place: Cham
publication: Intelligent Human Systems Integration 2019
publication_identifier:
eisbn:
- 978-3-030-11051-2
isbn:
- 978-3-030-11050-5
publication_status: published
publisher: Springer
series_title: ' Advances in Intelligent Systems and Computing'
status: public
title: Exploring the Acceptance of Video-Based Medical Support
type: book_chapter
user_id: '15514'
volume: 903
year: 2019
...
---
_id: '5736'
abstract:
- lang: ger
text: "Ein Blick auf Deutschland von oben und in unsere Planungswerkzeuge wie die
BauNVO zeigt, auch Jahrzehnte nach dem Leitbild der Stadt der kurzen Wege abseits
von Innenstädten und so mancher Großstadt, noch das Bild einer sortierten Stadt.
Die Gegenbewegung zur autogerechten Stadt setzte in den 1980er Jahren ein und
verfolgt im Kern ein diametral entgegengesetztes Ziel – die fußläufige Stadt.
Doch auch über 30 Jahre später zeigt sich abseits der Innenstädte in den umliegenden
Stadtteilen und Dörfern noch ein ernüchterndes monofunktionales Bild. Dabei sind
es genau diese räumlichen Einheiten, die in etwa dem fußläufigen Bewegungsradius
seiner Bewohner entsprechen. Hier - von der eigenen Wohnung aus erreichbar - braucht
es Angebote für die Ziele des Alltags. Inzwischen belegen zahlreiche Studien die
Möglichkeiten und Vorteile kompakter nutzungsgemischter Quartiere in ökologischer,
sozialer und ökonomischer Hinsicht. Diese Größeneinheit hat ein prominentes Vorbild:
Die mittelalterliche europäische Stadt. Mit diesem Perspektivwechsel wird die
Stadt von vorgestern zur Vorlage für das Quartier von übermorgen.\r\n\r\nZweitveröffentlichung
bei polis: https://polis-magazin.com/2019/10/quartier-der-kurzen-wege-die-stadt-von-vorgestern-als-quartier-von-uebermorgen/\r\n\r\n"
author:
- first_name: Marcel
full_name: Cardinali, Marcel
id: '58462'
last_name: Cardinali
orcid: 0000-0002-8841-9345
citation:
ama: Cardinali M. Quartier der kurzen Wege - Die Stadt von vorgestern ist das Quartier
von übermorgen. urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung.
2019;(5):26-37.
apa: Cardinali, M. (2019). Quartier der kurzen Wege - Die Stadt von vorgestern ist
das Quartier von übermorgen. urbanLab Magazin - Fachzeitschrift für Stadt-
und Regionalplanung, (5), 26–37.
bjps: Cardinali M (2019) Quartier der kurzen Wege - Die Stadt von vorgestern
ist das Quartier von übermorgen. urbanLab Magazin - Fachzeitschrift für Stadt-
und Regionalplanung 26–37.
chicago: 'Cardinali, Marcel. “Quartier der kurzen Wege - Die Stadt von vorgestern
ist das Quartier von übermorgen.” urbanLab Magazin - Fachzeitschrift für Stadt-
und Regionalplanung, no. 5 (2019): 26–37.'
chicago-de: 'Cardinali, Marcel. 2019. Quartier der kurzen Wege - Die Stadt von vorgestern
ist das Quartier von übermorgen. urbanLab Magazin - Fachzeitschrift für Stadt-
und Regionalplanung, Nr. 5: 26–37.'
din1505-2-1: 'Cardinali, Marcel: Quartier
der kurzen Wege - Die Stadt von vorgestern ist das Quartier von übermorgen. In:
urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung. Detmold,
Technische Hochschule Ostwestfalen-Lippe (2019), Nr. 5, S. 26–37'
havard: M. Cardinali, Quartier der kurzen Wege - Die Stadt von vorgestern ist das
Quartier von übermorgen, urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung.
(2019) 26–37.
ieee: M. Cardinali, “Quartier der kurzen Wege - Die Stadt von vorgestern ist das
Quartier von übermorgen,” urbanLab Magazin - Fachzeitschrift für Stadt- und
Regionalplanung, no. 5, pp. 26–37, 2019.
mla: Cardinali, Marcel. “Quartier der kurzen Wege - Die Stadt von vorgestern ist
das Quartier von übermorgen.” urbanLab Magazin - Fachzeitschrift für Stadt-
und Regionalplanung, no. 5, Technische Hochschule Ostwestfalen-Lippe, 2019,
pp. 26–37.
short: M. Cardinali, urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung
(2019) 26–37.
ufg: 'Cardinali, Marcel (2019): Quartier der kurzen Wege - Die Stadt von
vorgestern ist das Quartier von übermorgen, in: urbanLab Magazin - Fachzeitschrift
für Stadt- und Regionalplanung (5), S. 26–37.'
van: Cardinali M. Quartier der kurzen Wege - Die Stadt von vorgestern ist das Quartier
von übermorgen. urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung.
2019;(5):26–37.
date_created: 2021-04-30T12:41:46Z
date_updated: 2023-03-15T13:50:01Z
ddc:
- '050'
department:
- _id: DEP1303
- _id: DEP1055
file:
- access_level: open_access
content_type: application/pdf
creator: edu-dd0
date_created: 2021-05-02T11:48:35Z
date_updated: 2021-05-02T11:48:35Z
file_id: '5771'
file_name: Quartier der kurzen Wege.pdf
file_size: 8470382
relation: main_file
success: 1
file_date_updated: 2021-05-02T11:48:35Z
has_accepted_license: '1'
issue: '5'
keyword:
- Quartiersentwicklung
- Nachhaltigkeit
- Stadt der kurzen Wege
- Doppelte Innenentwicklung
- Nature-based Solutions
- Lebensqualität
language:
- iso: ger
main_file_link:
- open_access: '1'
url: https://www.yumpu.com/de/document/read/63241976/urbanlab-magazin-2019-stadtlandquartier
oa: '1'
page: 26-37
place: Detmold
popular_science: '1'
publication: urbanLab Magazin - Fachzeitschrift für Stadt- und Regionalplanung
publication_identifier:
issn:
- 2566-8900
publication_status: published
publisher: Technische Hochschule Ostwestfalen-Lippe
status: public
title: Quartier der kurzen Wege - Die Stadt von vorgestern ist das Quartier von übermorgen
type: journal_article
user_id: '45673'
year: 2019
...
---
_id: '2014'
abstract:
- lang: eng
text: Industrial applications are in transition towards modular and flexible architectures
that are capable of self-configuration and -optimisation. This is due to the demand
of mass customisation and the increasing complexity of industrial systems. The
conversion to modular systems is related to challenges in all disciplines. Consequently,
diverse tasks such as information processing, extensive networking, or system
monitoring using sensor and information fusion systems need to be reconsidered.
The focus of this contribution is on distributed sensor and information fusion
systems for system monitoring, which must reflect the increasing flexibility of
fusion systems. This contribution thus proposes an approach, which relies on a
network of self-descriptive intelligent sensor nodes, for the automatic design
and update of sensor and information fusion systems. This article encompasses
the fusion system configuration and adaptation as well as communication aspects.
Manual interaction with the flexibly changing system is reduced to a minimum.
article_number: '601'
author:
- first_name: Alexander
full_name: Fritze, Alexander
last_name: Fritze
- first_name: Uwe
full_name: Mönks, Uwe
id: '1825'
last_name: Mönks
- first_name: Christoph-Alexander
full_name: Holst, Christoph-Alexander
id: '64782'
last_name: Holst
- first_name: Volker
full_name: Lohweg, Volker
id: '1804'
last_name: Lohweg
orcid: 0000-0002-3325-7887
citation:
ama: Fritze A, Mönks U, Holst C-A, Lohweg V. An Approach to Automated Fusion System
Design and Adaptation. Sensors. 2017;17(3). doi: https://doi.org/10.3390/s17030601
apa: Fritze, A., Mönks, U., Holst, C.-A., & Lohweg, V. (2017). An Approach to
Automated Fusion System Design and Adaptation. Sensors, 17(3). https://doi.org/ https://doi.org/10.3390/s17030601
bjps: Fritze A et al. (2017) An Approach to Automated Fusion System
Design and Adaptation. Sensors 17.
chicago: Fritze, Alexander, Uwe Mönks, Christoph-Alexander Holst, and Volker Lohweg.
“An Approach to Automated Fusion System Design and Adaptation.” Sensors
17, no. 3 (2017). https://doi.org/
https://doi.org/10.3390/s17030601.
chicago-de: Fritze, Alexander, Uwe Mönks, Christoph-Alexander Holst und Volker Lohweg.
2017. An Approach to Automated Fusion System Design and Adaptation. Sensors
17, Nr. 3. doi:
https://doi.org/10.3390/s17030601, .
din1505-2-1: 'Fritze, Alexander ;
Mönks, Uwe ; Holst,
Christoph-Alexander ; Lohweg, Volker:
An Approach to Automated Fusion System Design and Adaptation. In: Sensors
Bd. 17 (2017), Nr. 3'
havard: A. Fritze, U. Mönks, C.-A. Holst, V. Lohweg, An Approach to Automated Fusion
System Design and Adaptation, Sensors. 17 (2017).
ieee: A. Fritze, U. Mönks, C.-A. Holst, and V. Lohweg, “An Approach to Automated
Fusion System Design and Adaptation,” Sensors, vol. 17, no. 3, 2017.
mla: Fritze, Alexander, et al. “An Approach to Automated Fusion System Design and
Adaptation.” Sensors, vol. 17, no. 3, 601, 2017, doi: https://doi.org/10.3390/s17030601.
short: A. Fritze, U. Mönks, C.-A. Holst, V. Lohweg, Sensors 17 (2017).
ufg: 'Fritze, Alexander et. al. (2017): An Approach to Automated Fusion System
Design and Adaptation, in: Sensors 17 (3).'
van: Fritze A, Mönks U, Holst C-A, Lohweg V. An Approach to Automated Fusion System
Design and Adaptation. Sensors. 2017;17(3).
date_created: 2019-11-25T08:52:14Z
date_updated: 2023-03-15T13:49:38Z
department:
- _id: DEP5023
doi: ' https://doi.org/10.3390/s17030601'
intvolume: ' 17'
issue: '3'
keyword:
- information fusion
- intelligent sensor
- knowledge-based system
- self-configuration
- sensor fusion
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.mdpi.com/1424-8220/17/3/601/htm
oa: '1'
publication: Sensors
publication_identifier:
issn:
- 1424-8220
publication_status: published
status: public
title: An Approach to Automated Fusion System Design and Adaptation
type: journal_article
user_id: '15514'
volume: 17
year: 2017
...
---
_id: '265'
abstract:
- lang: eng
text: The maintenance of a tool for injection molding or forming is usually accompanied
by its disassembly and assembly. The duration of the assembly activities is often
a large part of the total activity time for the maintenance of the tool. The degree
of performance of the employees in the execution of these disassembly and assembly
activities is often low. In addition, allowances occur (e.g. searching for work
equipment). At the Industrial Engineering Lab of the Ostwestfalen-Lippe University
of Applied Sciences, a prototype of an assistance system was developed to support
the assembly activities in toolmaking. With the help of this system, the operator
is guided step by step through the assembly process. The economic potential of
the system exists in the reduction of training times, the avoidance of assembly
errors and the increase of labor productivity.
author:
- first_name: Sven
full_name: Hinrichsen, Sven
id: '49010'
last_name: Hinrichsen
- first_name: Daniel
full_name: Riediger, Daniel
id: '52263'
last_name: Riediger
- first_name: Alexander
full_name: Unrau, Alexander
id: '64690'
last_name: Unrau
citation:
ama: 'Hinrichsen S, Riediger D, Unrau A. Development of a Projection-Based Assistance
System for Maintaining Injection Molding Tools. In: IEEE/ IEEM, ed. 2017 IEEE
International Conference on Industrial Engineering and Engineering Management
(IEEM). Danvers; 2017:1571-1575. doi:https://doi.org/10.1109/IEEM.2017.8290157'
apa: Hinrichsen, S., Riediger, D., & Unrau, A. (2017). Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools. In IEEE/ IEEM (Ed.),
2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM) (pp. 1571–1575). Danvers. https://doi.org/10.1109/IEEM.2017.8290157
bjps: Hinrichsen S, Riediger D and Unrau A (2017) Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools. In IEEE/ IEEM (ed.),
2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM). Danvers, pp. 1571–1575.
chicago: Hinrichsen, Sven, Daniel Riediger, and Alexander Unrau. “Development of
a Projection-Based Assistance System for Maintaining Injection Molding Tools.”
In 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM), edited by IEEE/ IEEM, 1571–75. Danvers, 2017. https://doi.org/10.1109/IEEM.2017.8290157.
chicago-de: 'Hinrichsen, Sven, Daniel Riediger und Alexander Unrau. 2017. Development
of a Projection-Based Assistance System for Maintaining Injection Molding Tools.
In: 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM), hg. von IEEE/ IEEM, 1571–1575. Danvers. doi:https://doi.org/10.1109/IEEM.2017.8290157,
.'
din1505-2-1: 'Hinrichsen, Sven ; Riediger, Daniel ; Unrau,
Alexander: Development of a Projection-Based Assistance System for Maintaining
Injection Molding Tools. In: IEEE/ IEEM
(Hrsg.): 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM). Danvers, 2017, S. 1571–1575'
havard: 'S. Hinrichsen, D. Riediger, A. Unrau, Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools, in: IEEE/ IEEM (Ed.),
2017 IEEE International Conference on Industrial Engineering and Engineering Management
(IEEM), Danvers, 2017: pp. 1571–1575.'
ieee: S. Hinrichsen, D. Riediger, and A. Unrau, “Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools,” in 2017 IEEE International
Conference on Industrial Engineering and Engineering Management (IEEM), Singapore,
2017, no. 1, pp. 1571–1575.
mla: Hinrichsen, Sven, et al. “Development of a Projection-Based Assistance System
for Maintaining Injection Molding Tools.” 2017 IEEE International Conference
on Industrial Engineering and Engineering Management (IEEM), edited by IEEE/
IEEM, no. 1, 2017, pp. 1571–75, doi:https://doi.org/10.1109/IEEM.2017.8290157.
short: 'S. Hinrichsen, D. Riediger, A. Unrau, in: IEEE/ IEEM (Ed.), 2017 IEEE International
Conference on Industrial Engineering and Engineering Management (IEEM), Danvers,
2017, pp. 1571–1575.'
ufg: 'Hinrichsen, Sven et. al. (2017): Development of a Projection-Based
Assistance System for Maintaining Injection Molding Tools, in: IEEE/ IEEM (Hg.):
2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM), Danvers, S. 1571–1575.'
van: 'Hinrichsen S, Riediger D, Unrau A. Development of a Projection-Based Assistance
System for Maintaining Injection Molding Tools. In: IEEE/ IEEM, editor. 2017 IEEE
International Conference on Industrial Engineering and Engineering Management
(IEEM). Danvers; 2017. p. 1571–5.'
conference:
end_date: 2017-12-13
location: Singapore
name: 'IEEE International Conference on Industrial Engineering and Engineering Management '
start_date: 2017-12-10
corporate_editor:
- IEEE/ IEEM
date_created: 2018-11-26T11:59:27Z
date_updated: 2023-03-15T13:49:41Z
ddc:
- '620'
department:
- _id: DEP7020
- _id: DEP1305
doi: https://doi.org/10.1109/IEEM.2017.8290157
issue: '1'
keyword:
- injection moulding
- machine tools
- maintenance engineering
- productivity
- projection-based assistance system
- injection molding tools
- assembly activities
- assembly process
- assembly errors
- tool maintenance
- disassembly activities
- economic potential
- Industrial Engineering Lab
- Ostwestfalen-Lippe University of Applied Sciences
- toolmaking
- Tools
- Injection molding
- Maintenance engineering
- Usability
- Task analysis
- Workstations
- Morphology
- assembly assistance systems
- assistance systems
- maintenance of injection molding tools
- manual assembly
language:
- iso: eng
page: 1571-1575
place: Danvers
publication: 2017 IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM)
publication_identifier:
isbn:
- '978-1-5386-0948-4 '
quality_controlled: '1'
status: public
title: Development of a Projection-Based Assistance System for Maintaining Injection
Molding Tools
type: conference
user_id: '74004'
year: 2017
...
---
_id: '4303'
abstract:
- lang: eng
text: The increasing demand to customize products affects production workers in
many industries, as assembly tasks become more complex due to higher product variety.
Assistive systems providing instructions at the workplace have been proposed to
overcome increasing cognitive demand during assembly tasks. Commercially available
assistive systems provide spatially registered instructions, either by using in-situ
projections or head-mounted displays (HMDs). As there is little empirical knowledge
about the individual advantages and disadvantages of both approaches, we are interested
in comparing both types of systems. Through a user study at a manual assembly
workplace, we compare both approaches to a paper baseline. Our results reveal
that both in-situ instructions and paper instructions lead to significantly faster
task completion times and significantly fewer errors than HMDs. Using additional
questionnaires and interviews, we are able to identify the shortcomings of HMD-based
instructions and discuss the possibilities of using flexible in-situ instructions
for worker assistance.
author:
- first_name: Sebastian
full_name: Büttner, Sebastian
id: '61868'
last_name: Büttner
- first_name: Markus
full_name: Funk, Markus
last_name: Funk
- first_name: Oliver
full_name: Sand, Oliver
last_name: Sand
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Büttner S, Funk M, Sand O, Röcker C. Using Head-Mounted Displays and In-Situ
Projection for Assistive Systems : A Comparison. In: 9th ACM International
Conference on PErvasive Technologies Related to Assistive Environments (PETRA
’16) . Korfu, Griechenland: ACM; 2016:1-8. doi:10.1145/2910674.2910679'
apa: 'Büttner, S., Funk, M., Sand, O., & Röcker, C. (2016). Using Head-Mounted
Displays and In-Situ Projection for Assistive Systems : A Comparison. In 9th
ACM International Conference on PErvasive Technologies Related to Assistive Environments
(PETRA ’16) (pp. 1–8). Korfu, Griechenland: ACM. https://doi.org/10.1145/2910674.2910679'
bjps: 'Büttner S et al. (2016) Using Head-Mounted Displays and In-Situ
Projection for Assistive Systems : A Comparison. 9th ACM International Conference
on PErvasive Technologies Related to Assistive Environments (PETRA ’16) .
Korfu, Griechenland: ACM, pp. 1–8.'
chicago: 'Büttner, Sebastian, Markus Funk, Oliver Sand, and Carsten Röcker. “Using
Head-Mounted Displays and In-Situ Projection for Assistive Systems : A Comparison.”
In 9th ACM International Conference on PErvasive Technologies Related to Assistive
Environments (PETRA ’16) , 1–8. Korfu, Griechenland: ACM, 2016. https://doi.org/10.1145/2910674.2910679.'
chicago-de: 'Büttner, Sebastian, Markus Funk, Oliver Sand und Carsten Röcker. 2016.
Using Head-Mounted Displays and In-Situ Projection for Assistive Systems : A Comparison.
In: 9th ACM International Conference on PErvasive Technologies Related to Assistive
Environments (PETRA ’16) , 1–8. Korfu, Griechenland: ACM. doi:10.1145/2910674.2910679,
.'
din1505-2-1: 'Büttner, Sebastian ;
Funk, Markus ; Sand,
Oliver ; Röcker, Carsten:
Using Head-Mounted Displays and In-Situ Projection for Assistive Systems : A Comparison.
In: 9th ACM International Conference on PErvasive Technologies Related to Assistive
Environments (PETRA ’16) . Korfu, Griechenland : ACM, 2016, S. 1–8'
havard: 'S. Büttner, M. Funk, O. Sand, C. Röcker, Using Head-Mounted Displays and
In-Situ Projection for Assistive Systems : A Comparison, in: 9th ACM International
Conference on PErvasive Technologies Related to Assistive Environments (PETRA
’16) , ACM, Korfu, Griechenland, 2016: pp. 1–8.'
ieee: 'S. Büttner, M. Funk, O. Sand, and C. Röcker, “Using Head-Mounted Displays
and In-Situ Projection for Assistive Systems : A Comparison,” in 9th ACM International
Conference on PErvasive Technologies Related to Assistive Environments (PETRA
’16) , Corfu; Greece , 2016, pp. 1–8.'
mla: 'Büttner, Sebastian, et al. “Using Head-Mounted Displays and In-Situ Projection
for Assistive Systems : A Comparison.” 9th ACM International Conference on
PErvasive Technologies Related to Assistive Environments (PETRA ’16) , ACM,
2016, pp. 1–8, doi:10.1145/2910674.2910679.'
short: 'S. Büttner, M. Funk, O. Sand, C. Röcker, in: 9th ACM International Conference
on PErvasive Technologies Related to Assistive Environments (PETRA ’16) , ACM,
Korfu, Griechenland, 2016, pp. 1–8.'
ufg: 'Büttner, Sebastian et. al. (2016): Using Head-Mounted Displays and
In-Situ Projection for Assistive Systems : A Comparison, in: 9th ACM International
Conference on PErvasive Technologies Related to Assistive Environments (PETRA
’16) , Korfu, Griechenland, S. 1–8.'
van: 'Büttner S, Funk M, Sand O, Röcker C. Using Head-Mounted Displays and In-Situ
Projection for Assistive Systems : A Comparison. In: 9th ACM International Conference
on PErvasive Technologies Related to Assistive Environments (PETRA ’16) . Korfu,
Griechenland: ACM; 2016. p. 1–8.'
conference:
end_date: 2016-07-01
location: 'Corfu; Greece '
name: 'PETRA ''16: Proceedings of the 9th ACM International Conference on PErvasive
Technologies Related to Assistive Environments'
start_date: 2016-06-29
date_created: 2020-12-22T14:11:07Z
date_updated: 2023-03-15T13:49:51Z
department:
- _id: DEP5023
doi: 10.1145/2910674.2910679
keyword:
- Spatial Augmented Reality
- Industrial Augmented Reality
- Projection-based Augmented Reality
- Head-Mounted Display
- Manufacturing
- Assistive System
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 1-8
place: Korfu, Griechenland
publication: '9th ACM International Conference on PErvasive Technologies Related to
Assistive Environments (PETRA ''16) '
publication_identifier:
isbn:
- 978-1-4503-4337-4
publication_status: published
publisher: ACM
status: public
title: 'Using Head-Mounted Displays and In-Situ Projection for Assistive Systems :
A Comparison'
type: conference
user_id: '15514'
year: 2016
...
---
_id: '4674'
abstract:
- lang: eng
text: More and more knowledge-based enterprises start to integrate Ambient Intelligence
technologies into their business processes. While the usage of such technologies
can lead to considerable benefits in a variety of business areas, the envisioned
applications have to meet fundamental user needs, otherwise the negative side
effects will overshadow the prospective benefits. This paper illustrates the benefits
as well as potential risks of implementing Ambient Intelligence applications in
knowledge-based enterprises and identifies the crucial aspects of successful system
design.
author:
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
citation:
ama: 'Röcker C. Toward Smart Office Environments - Benefits and Drawbacks of Using
Ambient Intelligence Technologies in Knowledge-Based Enterprises. In: Proceedings
of the International Conference on Economics, Business, Management and Marketing
(EBMM’09), October 9 -11, Singapore, Pp. 17 - 21. ; 2009:17-21.'
apa: Röcker, C. (2009). Toward Smart Office Environments - Benefits and Drawbacks
of Using Ambient Intelligence Technologies in Knowledge-Based Enterprises. In
Proceedings of the International Conference on Economics, Business, Management
and Marketing (EBMM’09), October 9 -11, Singapore, pp. 17 - 21 (pp. 17–21).
Signapore.
bjps: Röcker C (2009) Toward Smart Office Environments - Benefits and Drawbacks
of Using Ambient Intelligence Technologies in Knowledge-Based Enterprises. Proceedings
of the International Conference on Economics, Business, Management and Marketing
(EBMM’09), October 9 -11, Singapore, Pp. 17 - 21. pp. 17–21.
chicago: Röcker, Carsten. “Toward Smart Office Environments - Benefits and Drawbacks
of Using Ambient Intelligence Technologies in Knowledge-Based Enterprises.” In
Proceedings of the International Conference on Economics, Business, Management
and Marketing (EBMM’09), October 9 -11, Singapore, Pp. 17 - 21, 17–21, 2009.
chicago-de: 'Röcker, Carsten. 2009. Toward Smart Office Environments - Benefits
and Drawbacks of Using Ambient Intelligence Technologies in Knowledge-Based Enterprises.
In: Proceedings of the International Conference on Economics, Business, Management
and Marketing (EBMM’09), October 9 -11, Singapore, pp. 17 - 21, 17–21.'
din1505-2-1: 'Röcker, Carsten: Toward
Smart Office Environments - Benefits and Drawbacks of Using Ambient Intelligence
Technologies in Knowledge-Based Enterprises. In: Proceedings of the International
Conference on Economics, Business, Management and Marketing (EBMM’09), October
9 -11, Singapore, pp. 17 - 21, 2009, S. 17–21'
havard: 'C. Röcker, Toward Smart Office Environments - Benefits and Drawbacks of
Using Ambient Intelligence Technologies in Knowledge-Based Enterprises, in: Proceedings
of the International Conference on Economics, Business, Management and Marketing
(EBMM’09), October 9 -11, Singapore, Pp. 17 - 21, 2009: pp. 17–21.'
ieee: C. Röcker, “Toward Smart Office Environments - Benefits and Drawbacks of Using
Ambient Intelligence Technologies in Knowledge-Based Enterprises,” in Proceedings
of the International Conference on Economics, Business, Management and Marketing
(EBMM’09), October 9 -11, Singapore, pp. 17 - 21, Signapore, 2009, pp. 17–21.
mla: Röcker, Carsten. “Toward Smart Office Environments - Benefits and Drawbacks
of Using Ambient Intelligence Technologies in Knowledge-Based Enterprises.” Proceedings
of the International Conference on Economics, Business, Management and Marketing
(EBMM’09), October 9 -11, Singapore, Pp. 17 - 21, 2009, pp. 17–21.
short: 'C. Röcker, in: Proceedings of the International Conference on Economics,
Business, Management and Marketing (EBMM’09), October 9 -11, Singapore, Pp. 17
- 21, 2009, pp. 17–21.'
ufg: 'Röcker, Carsten (2009): Toward Smart Office Environments - Benefits
and Drawbacks of Using Ambient Intelligence Technologies in Knowledge-Based Enterprises,
in: Proceedings of the International Conference on Economics, Business, Management
and Marketing (EBMM’09), October 9 -11, Singapore, pp. 17 - 21, S. 17–21.'
van: 'Röcker C. Toward Smart Office Environments - Benefits and Drawbacks of Using
Ambient Intelligence Technologies in Knowledge-Based Enterprises. In: Proceedings
of the International Conference on Economics, Business, Management and Marketing
(EBMM’09), October 9 -11, Singapore, pp 17 - 21. 2009. p. 17–21.'
conference:
end_date: 2009-10-11
location: Signapore
name: 'International Conference on Economics, Business, Management and Marketing
: EBMM 2009 '
start_date: 200910-09
date_created: 2021-01-28T11:53:47Z
date_updated: 2023-03-15T13:49:54Z
department:
- _id: DEP5023
extern: '1'
keyword:
- Ambient Intelligence
- Ubiquitous Computing
- Technology-Enhanced Environments
- Smart Spaces
- Intellectual Teamwork
- Knowledge-Based Enterprises
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 17-21
publication: Proceedings of the International Conference on Economics, Business, Management
and Marketing (EBMM'09), October 9 -11, Singapore, pp. 17 - 21
publication_identifier:
isbn:
- '978-9-8108-3816-4 '
publication_status: published
related_material:
link:
- relation: research_paper
url: https://www.researchgate.net/profile/Carsten_Roecker/publication/228732107_Toward_Smart_Office_Environments-Benefits_and_Drawbacks_of_Using_Ambient_Intelligence_Technologies_in_Knowledge-Based_Enterprises/links/0f317535a2476a6c95000000/Toward-Smart-Office-Environments-Benefits-and-Drawbacks-of-Using-Ambient-Intelligence-Technologies-in-Knowledge-Based-Enterprises.pdf
status: public
title: Toward Smart Office Environments - Benefits and Drawbacks of Using Ambient
Intelligence Technologies in Knowledge-Based Enterprises
type: conference
user_id: '15514'
year: 2009
...
---
_id: '4830'
abstract:
- lang: eng
text: We present a ubiquitous computing environment that consists of the Hello.Wall
in combination with ViewPorts. Hello.Wall is a new wall-sized ambient display
[4,2] that emits information via light patterns and is considered informative
art. As an integral part of the physical environment, Hello.Wall constitutes a
seeding element of a social architectural space conveying awareness information
and atmospheres in organizations or at specific places. The display is context-dependent
by reflecting identity and distance of people passing by. Hello.Wall can "borrow"
other artefacts in order to communicate more detailed information. These mobile
devices are called ViewPorts. People can also further interact with the Hello.Wall
using ViewPorts via integrated WaveLAN and RFID technology.
author:
- first_name: Thorsten
full_name: Prante, Thorsten
last_name: Prante
- first_name: Carsten
full_name: Röcker, Carsten
id: '61525'
last_name: Röcker
- first_name: Norbert
full_name: Streitz, Norbert
last_name: Streitz
- first_name: Richard
full_name: Stenzel, Richard
last_name: Stenzel
- first_name: Carsten
full_name: Magerkurth, Carsten
last_name: Magerkurth
- first_name: Daniel
full_name: van Alphen, Daniel
last_name: van Alphen
- first_name: D. A.
full_name: Plewe, D. A.
last_name: Plewe
citation:
ama: 'Prante T, Röcker C, Streitz N, et al. Hello.Wall – Beyond Ambient Displays.
In: Ljungstrand P, Brotherton J, eds. Video Track and Adjunct Proceedings of
the Fifth International Conference on Ubiquitous Computing (UBICOMP’03). ;
2003:277-278.'
apa: Prante, T., Röcker, C., Streitz, N., Stenzel, R., Magerkurth, C., van Alphen,
D., & Plewe, D. A. (2003). Hello.Wall – Beyond Ambient Displays. In P. Ljungstrand
& J. Brotherton (Eds.), Video Track and Adjunct Proceedings of the Fifth
International Conference on Ubiquitous Computing (UBICOMP’03) (pp. 277–278).
Seattle, Washington, USA,.
bjps: Prante T et al. (2003) Hello.Wall – Beyond Ambient Displays.
In Ljungstrand P and Brotherton J (eds), Video Track and Adjunct Proceedings
of the Fifth International Conference on Ubiquitous Computing (UBICOMP’03).
pp. 277–278.
chicago: Prante, Thorsten, Carsten Röcker, Norbert Streitz, Richard Stenzel, Carsten
Magerkurth, Daniel van Alphen, and D. A. Plewe. “Hello.Wall – Beyond Ambient Displays.”
In Video Track and Adjunct Proceedings of the Fifth International Conference
on Ubiquitous Computing (UBICOMP’03), edited by P. Ljungstrand and J. Brotherton,
277–78, 2003.
chicago-de: 'Prante, Thorsten, Carsten Röcker, Norbert Streitz, Richard Stenzel,
Carsten Magerkurth, Daniel van Alphen und D. A. Plewe. 2003. Hello.Wall – Beyond
Ambient Displays. In: Video Track and Adjunct Proceedings of the Fifth International
Conference on Ubiquitous Computing (UBICOMP’03), hg. von P. Ljungstrand und
J. Brotherton, 277–278.'
din1505-2-1: 'Prante, Thorsten ; Röcker, Carsten ; Streitz,
Norbert ; Stenzel, Richard
; Magerkurth, Carsten ; van
Alphen, Daniel ; Plewe, D. A.:
Hello.Wall – Beyond Ambient Displays. In: Ljungstrand,
P. ; Brotherton, J. (Hrsg.):
Video Track and Adjunct Proceedings of the Fifth International Conference on
Ubiquitous Computing (UBICOMP’03), 2003, S. 277–278'
havard: 'T. Prante, C. Röcker, N. Streitz, R. Stenzel, C. Magerkurth, D. van Alphen,
D.A. Plewe, Hello.Wall – Beyond Ambient Displays, in: P. Ljungstrand, J. Brotherton
(Eds.), Video Track and Adjunct Proceedings of the Fifth International Conference
on Ubiquitous Computing (UBICOMP’03), 2003: pp. 277–278.'
ieee: T. Prante et al., “Hello.Wall – Beyond Ambient Displays,” in Video
Track and Adjunct Proceedings of the Fifth International Conference on Ubiquitous
Computing (UBICOMP’03), Seattle, Washington, USA, 2003, pp. 277–278.
mla: Prante, Thorsten, et al. “Hello.Wall – Beyond Ambient Displays.” Video Track
and Adjunct Proceedings of the Fifth International Conference on Ubiquitous Computing
(UBICOMP’03), edited by P. Ljungstrand and J. Brotherton, 2003, pp. 277–78.
short: 'T. Prante, C. Röcker, N. Streitz, R. Stenzel, C. Magerkurth, D. van Alphen,
D.A. Plewe, in: P. Ljungstrand, J. Brotherton (Eds.), Video Track and Adjunct
Proceedings of the Fifth International Conference on Ubiquitous Computing (UBICOMP’03),
2003, pp. 277–278.'
ufg: 'Prante, Thorsten et. al. (2003): Hello.Wall – Beyond Ambient Displays,
in: P. Ljungstrand/J. Brotherton (Hgg.): Video Track and Adjunct Proceedings
of the Fifth International Conference on Ubiquitous Computing (UBICOMP’03),
S. 277–278.'
van: 'Prante T, Röcker C, Streitz N, Stenzel R, Magerkurth C, van Alphen D, et al.
Hello.Wall – Beyond Ambient Displays. In: Ljungstrand P, Brotherton J, editors.
Video Track and Adjunct Proceedings of the Fifth International Conference on Ubiquitous
Computing (UBICOMP’03). 2003. p. 277–8.'
conference:
end_date: 2003-10-15
location: Seattle, Washington, USA,
name: 5th International Conference on Ubiquitous Computing (UBICOMP’03)
start_date: 2003-10-12
date_created: 2021-02-02T10:19:52Z
date_updated: 2023-03-15T13:49:56Z
department:
- _id: DEP5023
editor:
- first_name: P.
full_name: Ljungstrand, P.
last_name: Ljungstrand
- first_name: J.
full_name: Brotherton, J.
last_name: Brotherton
extern: '1'
keyword:
- Ambient display
- informative art
- social architectural space
- context-dependent
- sensor-based interaction
- interactive wall
- interaction design
- mobile devices
- smart artefacts
- ubiquitous computing environment
- calm technology
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 277-278
publication: Video Track and Adjunct Proceedings of the Fifth International Conference
on Ubiquitous Computing (UBICOMP’03)
publication_status: published
related_material:
link:
- relation: research_paper
url: https://www.researchgate.net/profile/Carsten_Magerkurth/publication/2933574_HelloWall_--_Beyond_Ambient_Displays/links/0046352e23037331ba000000/HelloWall--Beyond-Ambient-Displays.pdf
- relation: original
url: http://www.ubicomp.org/ubicomp2003/adjunct_proceedings/proceedings.pdf
status: public
title: Hello.Wall – Beyond Ambient Displays
type: conference
user_id: '15514'
year: 2003
...