--- _id: '11330' abstract: - lang: eng text: With the increasing complexity in manual assembly and a demographic decline in skilled workforce, the importance of well-documented processes through assembly instructions has grown. Creating these instructions is a time-consuming and knowledge-intensive task that typically relies on experienced employees. Although various automation solutions have been proposed to assist in generating assembly instructions, they often fall short in providing detailed textual guidance. With the rise of generative artificial intelligence (AI), new potentials arise in this domain. Therefore, this paper explores these potentials by employing various large language models (LLMs), prompting techniques and input data in an experimental setup for generating detailed assembly instructions, including the planning of assembly sequences as well as textual guidance on tools, assembly activities, and quality assurance measures. The findings reveal promising opportunities in leveraging LLMs but also substantial challenges, particularly in assembly sequence planning. To improve the reliability of generating assembly instructions, we propose a multi-agent concept that decomposes the complex task into simpler subtasks, each managed by specialized agents. author: - first_name: Frederic full_name: Meyer, Frederic id: '70963' last_name: Meyer - first_name: Lennart full_name: Freitag, Lennart id: '73431' last_name: Freitag - first_name: Sven full_name: Hinrichsen, Sven id: '49010' last_name: Hinrichsen - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann citation: ama: Meyer F, Freitag L, Hinrichsen S, Niggemann O. Potentials of Large Language Models for Generating Assembly Instructions. Vol 78. (IEEE, ed.). IEEE; 2024. doi:https://doi.org/10.1109/ETFA61755.2024.10710806 apa: Meyer, F., Freitag, L., Hinrichsen, S., & Niggemann, O. (2024). Potentials of Large Language Models for Generating Assembly Instructions. In IEEE (Ed.), 2024 IEEE 29th International Conference on Emerging Technologies and Factory Automation (ETFA) (Vol. 78). IEEE. https://doi.org/10.1109/ETFA61755.2024.10710806 bjps: 'Meyer F et al. (2024) Potentials of Large Language Models for Generating Assembly Instructions, IEEE (ed.). Piscataway, NJ: IEEE.' chicago: 'Meyer, Frederic, Lennart Freitag, Sven Hinrichsen, and Oliver Niggemann. Potentials of Large Language Models for Generating Assembly Instructions. Edited by IEEE. 2024 IEEE 29th International Conference on Emerging Technologies and Factory Automation (ETFA). Vol. 78. Piscataway, NJ: IEEE, 2024. https://doi.org/10.1109/ETFA61755.2024.10710806.' chicago-de: 'Meyer, Frederic, Lennart Freitag, Sven Hinrichsen und Oliver Niggemann. 2024. Potentials of Large Language Models for Generating Assembly Instructions. Hg. von IEEE. 2024 IEEE 29th International Conference on Emerging Technologies and Factory Automation (ETFA). Bd. 78. Piscataway, NJ: IEEE. doi:https://doi.org/10.1109/ETFA61755.2024.10710806, .' din1505-2-1: 'Meyer, Frederic ; Freitag, Lennart ; Hinrichsen, Sven ; Niggemann, Oliver ; IEEE (Hrsg.): Potentials of Large Language Models for Generating Assembly Instructions. Bd. 78. Piscataway, NJ : IEEE, 2024' havard: F. Meyer, L. Freitag, S. Hinrichsen, O. Niggemann, Potentials of Large Language Models for Generating Assembly Instructions, IEEE, Piscataway, NJ, 2024. ieee: 'F. Meyer, L. Freitag, S. Hinrichsen, and O. Niggemann, Potentials of Large Language Models for Generating Assembly Instructions, vol. 78. Piscataway, NJ: IEEE, 2024. doi: https://doi.org/10.1109/ETFA61755.2024.10710806.' mla: Meyer, Frederic, et al. “Potentials of Large Language Models for Generating Assembly Instructions.” 2024 IEEE 29th International Conference on Emerging Technologies and Factory Automation (ETFA), edited by IEEE, vol. 78, IEEE, 2024, https://doi.org/10.1109/ETFA61755.2024.10710806. short: F. Meyer, L. Freitag, S. Hinrichsen, O. Niggemann, Potentials of Large Language Models for Generating Assembly Instructions, IEEE, Piscataway, NJ, 2024. ufg: 'Meyer, Frederic u. a.: Potentials of Large Language Models for Generating Assembly Instructions, Bd. 78, hg. von IEEE, Piscataway, NJ 2024.' van: 'Meyer F, Freitag L, Hinrichsen S, Niggemann O. Potentials of Large Language Models for Generating Assembly Instructions. IEEE, editor. Vol. 78, 2024 IEEE 29th International Conference on Emerging Technologies and Factory Automation (ETFA). Piscataway, NJ: IEEE; 2024.' conference: end_date: 2024-09-13 location: Padova, Italy name: 29th International Conference on Emerging Technologies and Factory Automation (ETFA) start_date: 2024-09-10 corporate_editor: - IEEE date_created: 2024-04-12T07:06:41Z date_updated: 2024-10-22T07:28:35Z department: - _id: DEP7020 - _id: DEP1305 doi: https://doi.org/10.1109/ETFA61755.2024.10710806 intvolume: ' 78' keyword: - assembly instruction - GPT - large language model - LLM - prompt language: - iso: eng place: Piscataway, NJ publication: 2024 IEEE 29th International Conference on Emerging Technologies and Factory Automation (ETFA) publication_identifier: eisbn: - 979-8-3503-6122-3 isbn: - 979-8-3503-6123-0 publication_status: published publisher: IEEE quality_controlled: '1' status: public title: Potentials of Large Language Models for Generating Assembly Instructions type: conference_editor_article user_id: '83781' volume: 78 year: '2024' ... --- _id: '12993' abstract: - lang: eng text: In computer science and related technical fields, researchers, educators, and practitioners are continuously automating recurring tasks for high efficiency in a wide variety of fields. In higher education, such tasks that educators face are the recurring review and assessment process of students' programming coursework. Thus, various attempts exist to automate the assessment and feedback generation for course homework and practicals in higher education. Those approaches for automated programming task assessment often comprise running automated tests to check for limited functional correctness and potentially style checking for various violations (LINTing). Educators familiar with large-scale automated task assessment are likely used to seeing hard-coded solutions specifically or accidentally designed to just pass the required tests, ignoring or misinterpreting the actual task requirements. Detecting such issues in arbitrary code is non-trivial and an ongoing research topic in software engineering. Software engineering research has yielded various semantic analysis frameworks, such as GitHub's CodeQL, which can be adapted for programming task assessment. We present a work-in-progress programming task analysis framework which employs CodeQL's analysis technology to identify the actual use of task-description-mandated syntactic and semantic elements such as loop structures or the use of mandated data blocks in branching conditions. This allows extending existing course work analysis frameworks to include a semantic check of an uploaded program which exceeds the relatively simple set of input-output test cases provided by unit tests. We use a running example of entry level programming tasks and several solution attempts to introduce and explain our proposed control flow and data flow -based analysis method. We discuss the benefits of including semantic analysis as an additional method in the automated programming task assessment toolbox. Our main contribution is the adaptation of an semantic analysis code framework to analyse syntactic and semantic components in students' programming coursework. author: - first_name: Leon full_name: Wehmeier, Leon id: '81257' last_name: Wehmeier - first_name: Sebastian full_name: Eilermann, Sebastian last_name: Eilermann - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Andreas full_name: Deuter, Andreas id: '62088' last_name: Deuter orcid: 0000-0002-6529-6215 citation: ama: Wehmeier L, Eilermann S, Niggemann O, Deuter A. Task-Fidelity Assessment for Programming Tasks Using Semantic Code Analysis. (IEEE ASEE Frontiers in Education Conference, Institute of Electrical and Electronics Engineers, American Society for Engineering Education, eds.). IEEE; 2024. doi:10.1109/fie58773.2023.10342916 apa: 'Wehmeier, L., Eilermann, S., Niggemann, O., & Deuter, A. (2024). Task-fidelity Assessment for Programming Tasks Using Semantic Code Analysis. In IEEE ASEE Frontiers in Education Conference, Institute of Electrical and Electronics Engineers, & American Society for Engineering Education (Eds.), FIE 2023 : College Station, TX, USA, October 18-21, 2023 : conference proceedings  / 2023 IEEE Frontiers in Education Conference (FIE). IEEE. https://doi.org/10.1109/fie58773.2023.10342916' bjps: 'Wehmeier L et al. (2024) Task-Fidelity Assessment for Programming Tasks Using Semantic Code Analysis, IEEE ASEE Frontiers in Education Conference, Institute of Electrical and Electronics Engineers, and American Society for Engineering Education (eds). [Piscataway, NJ]: IEEE.' chicago: 'Wehmeier, Leon, Sebastian Eilermann, Oliver Niggemann, and Andreas Deuter. Task-Fidelity Assessment for Programming Tasks Using Semantic Code Analysis. Edited by IEEE ASEE Frontiers in Education Conference, Institute of Electrical and Electronics Engineers, and American Society for Engineering Education. FIE 2023 : College Station, TX, USA, October 18-21, 2023 : Conference Proceedings  / 2023 IEEE Frontiers in Education Conference (FIE). [Piscataway, NJ]: IEEE, 2024. https://doi.org/10.1109/fie58773.2023.10342916.' chicago-de: 'Wehmeier, Leon, Sebastian Eilermann, Oliver Niggemann und Andreas Deuter. 2024. Task-fidelity Assessment for Programming Tasks Using Semantic Code Analysis. Hg. von IEEE ASEE Frontiers in Education Conference, Institute of Electrical and Electronics Engineers, und American Society for Engineering Education. FIE 2023 : College Station, TX, USA, October 18-21, 2023 : conference proceedings  / 2023 IEEE Frontiers in Education Conference (FIE). [Piscataway, NJ]: IEEE. doi:10.1109/fie58773.2023.10342916, .' din1505-2-1: 'Wehmeier, Leon ; Eilermann, Sebastian ; Niggemann, Oliver ; Deuter, Andreas ; IEEE ASEE Frontiers in Education Conference ; Institute of Electrical and Electronics Engineers ; American Society for Engineering Education (Hrsg.): Task-fidelity Assessment for Programming Tasks Using Semantic Code Analysis. [Piscataway, NJ] : IEEE, 2024' havard: L. Wehmeier, S. Eilermann, O. Niggemann, A. Deuter, Task-fidelity Assessment for Programming Tasks Using Semantic Code Analysis, IEEE, [Piscataway, NJ], 2024. ieee: 'L. Wehmeier, S. Eilermann, O. Niggemann, and A. Deuter, Task-fidelity Assessment for Programming Tasks Using Semantic Code Analysis. [Piscataway, NJ]: IEEE, 2024. doi: 10.1109/fie58773.2023.10342916.' mla: 'Wehmeier, Leon, et al. “Task-Fidelity Assessment for Programming Tasks Using Semantic Code Analysis.” FIE 2023 : College Station, TX, USA, October 18-21, 2023 : Conference Proceedings  / 2023 IEEE Frontiers in Education Conference (FIE), edited by IEEE ASEE Frontiers in Education Conference et al., IEEE, 2024, https://doi.org/10.1109/fie58773.2023.10342916.' short: L. Wehmeier, S. Eilermann, O. Niggemann, A. Deuter, Task-Fidelity Assessment for Programming Tasks Using Semantic Code Analysis, IEEE, [Piscataway, NJ], 2024. ufg: 'Wehmeier, Leon u. a.: Task-fidelity Assessment for Programming Tasks Using Semantic Code Analysis, hg. von IEEE ASEE Frontiers in Education Conference/Institute of Electrical and Electronics Engineers, American Society for Engineering Education, [Piscataway, NJ] 2024.' van: 'Wehmeier L, Eilermann S, Niggemann O, Deuter A. Task-fidelity Assessment for Programming Tasks Using Semantic Code Analysis. IEEE ASEE Frontiers in Education Conference, Institute of Electrical and Electronics Engineers, American Society for Engineering Education, editors. FIE 2023 : College Station, TX, USA, October 18-21, 2023 : conference proceedings  / 2023 IEEE Frontiers in Education Conference (FIE). [Piscataway, NJ]: IEEE; 2024.' conference: end_date: 2023-10-21 location: Texas name: 2023 IEEE Frontiers in Education Conference (FIE) start_date: 2023-10-18 corporate_editor: - IEEE ASEE Frontiers in Education Conference - Institute of Electrical and Electronics Engineers - American Society for Engineering Education date_created: 2025-06-18T13:05:11Z date_updated: 2025-06-18T13:23:56Z department: - _id: DEP7022 - _id: DEP1306 - _id: DEP7001 doi: 10.1109/fie58773.2023.10342916 keyword: - Codes - Electronic learning - Soft sensors - Semantics - Education - Syntactics - Task analysis language: - iso: eng place: '[Piscataway, NJ]' publication: 'FIE 2023 : College Station, TX, USA, October 18-21, 2023 : conference proceedings / 2023 IEEE Frontiers in Education Conference (FIE)' publication_identifier: eisbn: - 979-8-3503-3642-9 isbn: - 979-8-3503-3643-6 publication_status: published publisher: IEEE status: public title: Task-fidelity Assessment for Programming Tasks Using Semantic Code Analysis type: conference_editor_article user_id: '83781' year: '2024' ... --- _id: '11333' author: - first_name: Tobias full_name: Stuke, Tobias id: '79141' last_name: Stuke - first_name: Thomas full_name: Rauschenbach, Thomas last_name: Rauschenbach - first_name: Thomas full_name: Bartsch, Thomas id: '43513' last_name: Bartsch citation: ama: Stuke T, Rauschenbach T, Bartsch T. Development of a Reinforcement Learning Approach for Industrial Bin Picking. Vol 18. 1st ed. (Niggemann O, Beyerer Jürgen , Krantz Maria, Kühnert C, eds.). Springer Verlag; 2023:8. doi:10.1007/978-3-031-47062-2_5 apa: 'Stuke, T., Rauschenbach, T., & Bartsch, T. (2023). Development of a Reinforcement Learning Approach for Industrial Bin Picking. In O. Niggemann, Jürgen Beyerer , Maria Krantz, & C. Kühnert (Eds.), Machine Learning for Cyber-Physical Systems: Selected papers from the International Conference ML4CPS 2023 (1st ed., Vol. 18, p. 8). Springer Verlag. https://doi.org/10.1007/978-3-031-47062-2_5' bjps: 'Stuke T, Rauschenbach T and Bartsch T (2023) Development of a Reinforcement Learning Approach for Industrial Bin Picking, 1st ed., Niggemann O et al. (eds). Heidelberg: Springer Verlag.' chicago: 'Stuke, Tobias, Thomas Rauschenbach, and Thomas Bartsch. Development of a Reinforcement Learning Approach for Industrial Bin Picking. Edited by Oliver Niggemann, Jürgen Beyerer , Maria Krantz, and Christian Kühnert. Machine Learning for Cyber-Physical Systems: Selected Papers from the International Conference ML4CPS 2023 . 1st ed. Vol. 18. Technologien Für Die Intelligente Automation. Heidelberg: Springer Verlag, 2023. https://doi.org/10.1007/978-3-031-47062-2_5.' chicago-de: 'Stuke, Tobias, Thomas Rauschenbach und Thomas Bartsch. 2023. Development of a Reinforcement Learning Approach for Industrial Bin Picking. Hg. von Oliver Niggemann, Jürgen Beyerer , Maria Krantz, und Christian Kühnert. Machine Learning for Cyber-Physical Systems: Selected papers from the International Conference ML4CPS 2023 . 1. Aufl. Bd. 18. Technologien für die intelligente Automation. Heidelberg: Springer Verlag. doi:10.1007/978-3-031-47062-2_5, .' din1505-2-1: 'Stuke, Tobias ; Rauschenbach, Thomas ; Bartsch, Thomas ; Niggemann, O. ; Beyerer , Jürgen ; Krantz, Maria ; Kühnert, C. (Hrsg.): Development of a Reinforcement Learning Approach for Industrial Bin Picking, Technologien für die intelligente Automation. Bd. 18. 1. Aufl. Heidelberg : Springer Verlag, 2023' havard: T. Stuke, T. Rauschenbach, T. Bartsch, Development of a Reinforcement Learning Approach for Industrial Bin Picking, 1st ed., Springer Verlag, Heidelberg, 2023. ieee: 'T. Stuke, T. Rauschenbach, and T. Bartsch, Development of a Reinforcement Learning Approach for Industrial Bin Picking, 1st ed., vol. 18. Heidelberg: Springer Verlag, 2023, p. 8. doi: 10.1007/978-3-031-47062-2_5.' mla: 'Stuke, Tobias, et al. “Development of a Reinforcement Learning Approach for Industrial Bin Picking.” Machine Learning for Cyber-Physical Systems: Selected Papers from the International Conference ML4CPS 2023 , edited by Oliver Niggemann et al., 1st ed., vol. 18, Springer Verlag, 2023, p. 8, https://doi.org/10.1007/978-3-031-47062-2_5.' short: T. Stuke, T. Rauschenbach, T. Bartsch, Development of a Reinforcement Learning Approach for Industrial Bin Picking, 1st ed., Springer Verlag, Heidelberg, 2023. ufg: 'Stuke, Tobias/Rauschenbach, Thomas/Bartsch, Thomas: Development of a Reinforcement Learning Approach for Industrial Bin Picking, Bd. 18, hg. von Niggemann, Oliver u. a., Heidelberg 12023 (Technologien für die intelligente Automation).' van: 'Stuke T, Rauschenbach T, Bartsch T. Development of a Reinforcement Learning Approach for Industrial Bin Picking. 1st ed. Niggemann O, Beyerer Jürgen , Krantz Maria, Kühnert C, editors. Machine Learning for Cyber-Physical Systems: Selected papers from the International Conference ML4CPS 2023 . Heidelberg: Springer Verlag; 2023. (Technologien für die intelligente Automation; vol. 18).' conference: end_date: 2023-03-31 location: Hamburg name: ML4CPS - Machine Learning for Cyber Physical Systems start_date: 2023-03-29 date_created: 2024-04-12T12:18:41Z date_updated: 2024-07-19T09:43:05Z department: - _id: DEP7011 doi: 10.1007/978-3-031-47062-2_5 edition: '1' editor: - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: ' Jürgen ' full_name: 'Beyerer , Jürgen ' last_name: 'Beyerer ' - first_name: ' Maria' full_name: Krantz, Maria last_name: Krantz - first_name: 'Christian ' full_name: 'Kühnert, Christian ' last_name: Kühnert intvolume: ' 18' language: - iso: eng page: '8' place: Heidelberg publication: 'Machine Learning for Cyber-Physical Systems: Selected papers from the International Conference ML4CPS 2023 ' publication_identifier: isbn: - 978-3-031-47061-5 publication_status: published publisher: Springer Verlag series_title: Technologien für die intelligente Automation status: public title: Development of a Reinforcement Learning Approach for Industrial Bin Picking type: conference_editor_article user_id: '83781' volume: 18 year: '2023' ... --- _id: '10782' abstract: - lang: eng text: With the trend towards shorter product lifecycles, smaller batch sizes, and more product variants, the complexity of manual assembly activities is increasing. To support employees in carrying out complex assembly tasks, the use of assembly instructions is indispensable to ensure high process capability and work productivity. However, the creation of assembly instructions is often time-consuming. Thus, the use of automation approaches can be a way to simplify the creation of assembly instructions. Therefore, this paper introduces a promising automation concept for applying robotic process automation (RPA) to generate assembly instructions automatically. Finally, the automation concept is demonstrated in a practical use case that illustrates the associated automation potential of RPA. author: - first_name: Frederic full_name: Meyer, Frederic id: '71656' last_name: Meyer - first_name: Sven full_name: Hinrichsen, Sven id: '49010' last_name: Hinrichsen - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann citation: ama: Meyer F, Hinrichsen S, Niggemann O. How to Generate Assembly Instructions with Robotic Process Automation. Vol 111. AHFE International; 2023:629-638. doi:10.54941/ahfe1004070 apa: 'Meyer, F., Hinrichsen, S., & Niggemann, O. (2023). How to Generate Assembly Instructions with Robotic Process Automation. In Human Interaction & Emerging Technologies (IHIET 2023): Artificial Intelligence & Future Applications (Vol. 111, pp. 629–638). AHFE International. https://doi.org/10.54941/ahfe1004070' bjps: Meyer F, Hinrichsen S and Niggemann O (2023) How to Generate Assembly Instructions with Robotic Process Automation. AHFE International. chicago: 'Meyer, Frederic, Sven Hinrichsen, and Oliver Niggemann. How to Generate Assembly Instructions with Robotic Process Automation. Human Interaction & Emerging Technologies (IHIET 2023): Artificial Intelligence & Future Applications. Vol. 111. Human Interaction and Emerging Technologies (IHIET 2023). AHFE International, 2023. https://doi.org/10.54941/ahfe1004070.' chicago-de: 'Meyer, Frederic, Sven Hinrichsen und Oliver Niggemann. 2023. How to Generate Assembly Instructions with Robotic Process Automation. Human Interaction & Emerging Technologies (IHIET 2023): Artificial Intelligence & Future Applications. Bd. 111. Human Interaction and Emerging Technologies (IHIET 2023). AHFE International. doi:10.54941/ahfe1004070, .' din1505-2-1: 'Meyer, Frederic ; Hinrichsen, Sven ; Niggemann, Oliver: How to Generate Assembly Instructions with Robotic Process Automation, Human Interaction and Emerging Technologies (IHIET 2023). Bd. 111 : AHFE International, 2023' havard: F. Meyer, S. Hinrichsen, O. Niggemann, How to Generate Assembly Instructions with Robotic Process Automation, AHFE International, 2023. ieee: 'F. Meyer, S. Hinrichsen, and O. Niggemann, How to Generate Assembly Instructions with Robotic Process Automation, vol. 111. AHFE International, 2023, pp. 629–638. doi: 10.54941/ahfe1004070.' mla: 'Meyer, Frederic, et al. “How to Generate Assembly Instructions with Robotic Process Automation.” Human Interaction & Emerging Technologies (IHIET 2023): Artificial Intelligence & Future Applications, vol. 111, AHFE International, 2023, pp. 629–38, https://doi.org/10.54941/ahfe1004070.' short: F. Meyer, S. Hinrichsen, O. Niggemann, How to Generate Assembly Instructions with Robotic Process Automation, AHFE International, 2023. ufg: 'Meyer, Frederic/Hinrichsen, Sven/Niggemann, Oliver: How to Generate Assembly Instructions with Robotic Process Automation, Bd. 111, o. O. 2023 (Human Interaction and Emerging Technologies (IHIET 2023)).' van: 'Meyer F, Hinrichsen S, Niggemann O. How to Generate Assembly Instructions with Robotic Process Automation. Human Interaction & Emerging Technologies (IHIET 2023): Artificial Intelligence & Future Applications. AHFE International; 2023. (Human Interaction and Emerging Technologies (IHIET 2023); vol. 111).' conference: end_date: 2023-08-24 location: NIzza name: IHIET 2023 start_date: 2023-08-22 date_created: 2023-11-16T11:57:57Z date_updated: 2023-11-16T11:58:05Z department: - _id: DEP7020 - _id: DEP1305 doi: 10.54941/ahfe1004070 intvolume: ' 111' keyword: - Digital Assembly Instruction - Industrial Engineering - Manual Assembly - Robotic Process Automation - RPA - Work Instruction language: - iso: eng main_file_link: - open_access: '1' oa: '1' page: 629-638 publication: 'Human Interaction & Emerging Technologies (IHIET 2023): Artificial Intelligence & Future Applications' publication_identifier: issn: - 2771-0718 publication_status: published publisher: AHFE International quality_controlled: '1' series_title: Human Interaction and Emerging Technologies (IHIET 2023) status: public title: How to Generate Assembly Instructions with Robotic Process Automation type: conference_editor_article user_id: '83780' volume: 111 year: '2023' ... --- _id: '4786' author: - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Gautam full_name: Biswas, Gautam last_name: Biswas - first_name: John S. full_name: Kinnebrew, John S. last_name: Kinnebrew - first_name: Hamed full_name: Khorasgani, Hamed last_name: Khorasgani - first_name: Nemanja full_name: Hranisavljevic, Nemanja id: '62376' last_name: Hranisavljevic - first_name: Andreas full_name: Bunte, Andreas id: '58885' last_name: Bunte citation: ama: 'Niggemann O, Biswas G, Kinnebrew JS, Khorasgani H, Hranisavljevic N, Bunte A. Konzeptualisierung als Kernfrage des Maschinellen Lernens in der Produktion. In: ten Hompel M, Vogel-Heuser B, Bauernhansl T, eds. Handbuch Industrie 4.0: Produktion, Automatisierung und Logistik. Berlin: Springer; 2020:800.' apa: 'Niggemann, O., Biswas, G., Kinnebrew, J. S., Khorasgani, H., Hranisavljevic, N., & Bunte, A. (2020). Konzeptualisierung als Kernfrage des Maschinellen Lernens in der Produktion. In M. ten Hompel, B. Vogel-Heuser, & T. Bauernhansl (Eds.), Handbuch Industrie 4.0: Produktion, Automatisierung und Logistik (p. 800). Berlin: Springer.' bjps: 'Niggemann O et al. (2020) Konzeptualisierung als Kernfrage des Maschinellen Lernens in der Produktion. In ten Hompel M, Vogel-Heuser B and Bauernhansl T (eds), Handbuch Industrie 4.0: Produktion, Automatisierung und Logistik. Berlin: Springer, p. 800.' chicago: 'Niggemann, Oliver, Gautam Biswas, John S. Kinnebrew, Hamed Khorasgani, Nemanja Hranisavljevic, and Andreas Bunte. “Konzeptualisierung als Kernfrage des Maschinellen Lernens in der Produktion.” In Handbuch Industrie 4.0: Produktion, Automatisierung und Logistik, edited by Michael ten Hompel, Birgit Vogel-Heuser, and Thomas Bauernhansl, 800. Berlin: Springer, 2020.' chicago-de: 'Niggemann, Oliver, Gautam Biswas, John S. Kinnebrew, Hamed Khorasgani, Nemanja Hranisavljevic und Andreas Bunte. 2020. Konzeptualisierung als Kernfrage des Maschinellen Lernens in der Produktion. In: Handbuch Industrie 4.0: Produktion, Automatisierung und Logistik, hg. von Michael ten Hompel, Birgit Vogel-Heuser, und Thomas Bauernhansl, 800. Berlin: Springer.' din1505-2-1: 'Niggemann, Oliver ; Biswas, Gautam ; Kinnebrew, John S. ; Khorasgani, Hamed ; Hranisavljevic, Nemanja ; Bunte, Andreas: Konzeptualisierung als Kernfrage des Maschinellen Lernens in der Produktion. In: ten Hompel, M. ; Vogel-Heuser, B. ; Bauernhansl, T. (Hrsg.): Handbuch Industrie 4.0: Produktion, Automatisierung und Logistik. Berlin : Springer, 2020, S. 800' havard: 'O. Niggemann, G. Biswas, J.S. Kinnebrew, H. Khorasgani, N. Hranisavljevic, A. Bunte, Konzeptualisierung als Kernfrage des Maschinellen Lernens in der Produktion, in: M. ten Hompel, B. Vogel-Heuser, T. Bauernhansl (Eds.), Handbuch Industrie 4.0: Produktion, Automatisierung und Logistik, Springer, Berlin, 2020: p. 800.' ieee: 'O. Niggemann, G. Biswas, J. S. Kinnebrew, H. Khorasgani, N. Hranisavljevic, and A. Bunte, “Konzeptualisierung als Kernfrage des Maschinellen Lernens in der Produktion,” in Handbuch Industrie 4.0: Produktion, Automatisierung und Logistik, M. ten Hompel, B. Vogel-Heuser, and T. Bauernhansl, Eds. Berlin: Springer, 2020, p. 800.' mla: 'Niggemann, Oliver, et al. “Konzeptualisierung als Kernfrage des Maschinellen Lernens in der Produktion.” Handbuch Industrie 4.0: Produktion, Automatisierung und Logistik, edited by Michael ten Hompel et al., Springer, 2020, p. 800.' short: 'O. Niggemann, G. Biswas, J.S. Kinnebrew, H. Khorasgani, N. Hranisavljevic, A. Bunte, in: M. ten Hompel, B. Vogel-Heuser, T. Bauernhansl (Eds.), Handbuch Industrie 4.0: Produktion, Automatisierung und Logistik, Springer, Berlin, 2020, p. 800.' ufg: 'Niggemann, Oliver et. al. (2020): Konzeptualisierung als Kernfrage des Maschinellen Lernens in der Produktion, in: Michael ten Hompel et. al. (Hgg.): Handbuch Industrie 4.0: Produktion, Automatisierung und Logistik, Berlin, S. 800.' van: 'Niggemann O, Biswas G, Kinnebrew JS, Khorasgani H, Hranisavljevic N, Bunte A. Konzeptualisierung als Kernfrage des Maschinellen Lernens in der Produktion. In: ten Hompel M, Vogel-Heuser B, Bauernhansl T, editors. Handbuch Industrie 40: Produktion, Automatisierung und Logistik. Berlin: Springer; 2020. p. 800.' date_created: 2021-02-02T08:38:44Z date_updated: 2023-03-15T13:49:55Z department: - _id: DEP5023 editor: - first_name: Michael full_name: ten Hompel, Michael last_name: ten Hompel - first_name: Birgit full_name: Vogel-Heuser, Birgit last_name: Vogel-Heuser - first_name: Thomas full_name: Bauernhansl, Thomas last_name: Bauernhansl language: - iso: ger page: '800' place: Berlin publication: 'Handbuch Industrie 4.0: Produktion, Automatisierung und Logistik' publication_identifier: isbn: - 978-3-662-45537-1 publication_status: published publisher: Springer status: public title: Konzeptualisierung als Kernfrage des Maschinellen Lernens in der Produktion type: book_chapter user_id: '74004' year: 2020 ... --- _id: '5443' author: - first_name: Fan full_name: Zhang, Fan id: '71479' last_name: Zhang - first_name: K. full_name: Pinkal, K. last_name: Pinkal - first_name: Florian full_name: Conradi, Florian id: '68967' last_name: Conradi - first_name: Patrick full_name: Wefing, Patrick id: '68976' last_name: Wefing - first_name: Jan full_name: Schneider, Jan id: '13209' last_name: Schneider orcid: 0000-0001-6401-8873 - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann citation: ama: 'Zhang F, Pinkal K, Conradi F, Wefing P, Schneider J, Niggemann O. Quality Control of Continuous Wort Production through Production Data Analysis in Latent Space. In: ; 2019.' apa: Zhang, F., Pinkal, K., Conradi, F., Wefing, P., Schneider, J., & Niggemann, O. (2019). Quality Control of Continuous Wort Production through Production Data Analysis in Latent Space. IEEE-ICIT Feb 2019, Melbourne, Australia. bjps: Zhang F et al. (2019) Quality Control of Continuous Wort Production through Production Data Analysis in Latent Space. chicago: Zhang, Fan, K. Pinkal, Florian Conradi, Patrick Wefing, Jan Schneider, and Oliver Niggemann. “Quality Control of Continuous Wort Production through Production Data Analysis in Latent Space,” 2019. chicago-de: 'Zhang, Fan, K. Pinkal, Florian Conradi, Patrick Wefing, Jan Schneider und Oliver Niggemann. 2019. Quality Control of Continuous Wort Production through Production Data Analysis in Latent Space. In: .' din1505-2-1: 'Zhang, Fan ; Pinkal, K. ; Conradi, Florian ; Wefing, Patrick ; Schneider, Jan ; Niggemann, Oliver: Quality Control of Continuous Wort Production through Production Data Analysis in Latent Space. In: , 2019' havard: 'F. Zhang, K. Pinkal, F. Conradi, P. Wefing, J. Schneider, O. Niggemann, Quality Control of Continuous Wort Production through Production Data Analysis in Latent Space, in: 2019.' ieee: F. Zhang, K. Pinkal, F. Conradi, P. Wefing, J. Schneider, and O. Niggemann, “Quality Control of Continuous Wort Production through Production Data Analysis in Latent Space,” presented at the IEEE-ICIT Feb 2019, Melbourne, Australia, 2019. mla: Zhang, Fan, et al. Quality Control of Continuous Wort Production through Production Data Analysis in Latent Space. 2019. short: 'F. Zhang, K. Pinkal, F. Conradi, P. Wefing, J. Schneider, O. Niggemann, in: 2019.' ufg: 'Zhang, Fan u. a.: Quality Control of Continuous Wort Production through Production Data Analysis in Latent Space, in: o. Hg.: o. O. 2019.' van: Zhang F, Pinkal K, Conradi F, Wefing P, Schneider J, Niggemann O. Quality Control of Continuous Wort Production through Production Data Analysis in Latent Space. In 2019. conference: end_date: 2019-02-15 location: Melbourne, Australia name: IEEE-ICIT Feb 2019 start_date: 2019-02-13 date_created: 2021-04-08T08:44:40Z date_updated: 2024-04-15T07:39:15Z department: - _id: DEP4023 - _id: DEP1308 language: - iso: eng status: public title: Quality Control of Continuous Wort Production through Production Data Analysis in Latent Space type: conference_abstract user_id: '81304' year: '2019' ... --- _id: '4780' author: - first_name: Andreas full_name: Bunte, Andreas id: '58885' last_name: Bunte - first_name: Paul full_name: Wunderlich, Paul id: '52317' last_name: Wunderlich - first_name: Natalia full_name: Moriz, Natalia id: '44238' last_name: Moriz - first_name: Peng full_name: Li, Peng id: '58937' last_name: Li - first_name: Andre full_name: Mankowski, Andre id: '51482' last_name: Mankowski - first_name: Antje full_name: Rogalla, Antje id: '66617' last_name: Rogalla - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann citation: ama: 'Bunte A, Wunderlich P, Moriz N, et al. Why Symbolic AI is a Key Technology for Self-Adaption in the Context of CPPS. In: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Zaragoza, Spain; 2019.' apa: Bunte, A., Wunderlich, P., Moriz, N., Li, P., Mankowski, A., Rogalla, A., & Niggemann, O. (2019). Why Symbolic AI is a Key Technology for Self-Adaption in the Context of CPPS. In 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Zaragoza, Spain. bjps: Bunte A et al. (2019) Why Symbolic AI Is a Key Technology for Self-Adaption in the Context of CPPS. 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Zaragoza, Spain. chicago: Bunte, Andreas, Paul Wunderlich, Natalia Moriz, Peng Li, Andre Mankowski, Antje Rogalla, and Oliver Niggemann. “Why Symbolic AI Is a Key Technology for Self-Adaption in the Context of CPPS.” In 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Zaragoza, Spain, 2019. chicago-de: 'Bunte, Andreas, Paul Wunderlich, Natalia Moriz, Peng Li, Andre Mankowski, Antje Rogalla und Oliver Niggemann. 2019. Why Symbolic AI is a Key Technology for Self-Adaption in the Context of CPPS. In: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Zaragoza, Spain.' din1505-2-1: 'Bunte, Andreas ; Wunderlich, Paul ; Moriz, Natalia ; Li, Peng ; Mankowski, Andre ; Rogalla, Antje ; Niggemann, Oliver: Why Symbolic AI is a Key Technology for Self-Adaption in the Context of CPPS. In: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Zaragoza, Spain, 2019' havard: 'A. Bunte, P. Wunderlich, N. Moriz, P. Li, A. Mankowski, A. Rogalla, O. Niggemann, Why Symbolic AI is a Key Technology for Self-Adaption in the Context of CPPS, in: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Zaragoza, Spain, 2019.' ieee: A. Bunte et al., “Why Symbolic AI is a Key Technology for Self-Adaption in the Context of CPPS,” in 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2019. mla: Bunte, Andreas, et al. “Why Symbolic AI Is a Key Technology for Self-Adaption in the Context of CPPS.” 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2019. short: 'A. Bunte, P. Wunderlich, N. Moriz, P. Li, A. Mankowski, A. Rogalla, O. Niggemann, in: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Zaragoza, Spain, 2019.' ufg: 'Bunte, Andreas et. al. (2019): Why Symbolic AI is a Key Technology for Self-Adaption in the Context of CPPS, in: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Zaragoza, Spain.' van: 'Bunte A, Wunderlich P, Moriz N, Li P, Mankowski A, Rogalla A, et al. Why Symbolic AI is a Key Technology for Self-Adaption in the Context of CPPS. In: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Zaragoza, Spain; 2019.' date_created: 2021-02-02T08:08:34Z date_updated: 2023-03-15T13:49:55Z department: - _id: DEP5023 language: - iso: eng place: Zaragoza, Spain publication: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) status: public title: Why Symbolic AI is a Key Technology for Self-Adaption in the Context of CPPS type: conference user_id: '68554' year: 2019 ... --- _id: '4781' abstract: - lang: eng text: Cyber-physical production systems (CPPS) integrate physical and computational resources due to increasingly available sensors and processing power. This enables the usage of data, to create additional benefit, such as condition monitoring or optimization. These capabilities can lead to cognition, such that the system is able to adapt independently to changing circumstances by learning from additional sensors information. Developing a reference architecture for the design of CPPS and standardization of machines and software interfaces is crucial to enable compatibility of data usage between different machine models and vendors. This paper analysis existing reference architecture regarding their cognitive abilities, based on requirements that are derived from three different use cases. The results from the evaluation of the reference architectures, which include two instances that stem from the field of cognitive science, reveal a gap in the applicability of the architectures regarding the generalizability and the level of abstraction. While reference architectures from the field of automation are suitable to address use case specific requirements, and do not address the general requirements, especially w.r.t. adaptability, the examples from the field of cognitive science are well usable to reach a high level of adaption and cognition. It is desirable to merge advantages of both classes of architectures to address challenges in the field of CPPS in Industrie 4.0. author: - first_name: Andreas full_name: Bunte, Andreas id: '58885' last_name: Bunte - first_name: Andreas full_name: Fischbach, Andreas last_name: Fischbach - first_name: Jan full_name: Strohschein, Jan last_name: Strohschein - first_name: Thomas full_name: Bartz-Beielstein, Thomas last_name: Bartz-Beielstein - first_name: Heide full_name: Faeskorn-Woyke, Heide last_name: Faeskorn-Woyke - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann citation: ama: 'Bunte A, Fischbach A, Strohschein J, Bartz-Beielstein T, Faeskorn-Woyke H, Niggemann O. Evaluation of Cognitive Architectures for Cyber-Physical Production Systems. In: Institute of Electrical and Electronics Engineers, Universidad de Zaragoza , eds. 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). IEEE International Conference on Emerging Technologies and Factory Automation-ETFA. IEEE; 2019:729-736. doi:10.1109/etfa.2019.8869038' apa: Bunte, A., Fischbach, A., Strohschein, J., Bartz-Beielstein, T., Faeskorn-Woyke, H., & Niggemann, O. (2019). Evaluation of Cognitive Architectures for Cyber-Physical Production Systems. In Institute of Electrical and Electronics Engineers & Universidad de Zaragoza (Eds.), 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) (pp. 729–736). IEEE. https://doi.org/10.1109/etfa.2019.8869038 bjps: 'Bunte A et al. (2019) Evaluation of Cognitive Architectures for Cyber-Physical Production Systems. In Institute of Electrical and Electronics Engineers and Universidad de Zaragoza (eds), 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). [Piscataway, NJ]: IEEE, pp. 729–736.' chicago: 'Bunte, Andreas, Andreas Fischbach, Jan Strohschein, Thomas Bartz-Beielstein, Heide Faeskorn-Woyke, and Oliver Niggemann. “Evaluation of Cognitive Architectures for Cyber-Physical Production Systems.” In 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), edited by Institute of Electrical and Electronics Engineers and Universidad de Zaragoza , 729–36. IEEE International Conference on Emerging Technologies and Factory Automation-ETFA. [Piscataway, NJ]: IEEE, 2019. https://doi.org/10.1109/etfa.2019.8869038.' chicago-de: 'Bunte, Andreas, Andreas Fischbach, Jan Strohschein, Thomas Bartz-Beielstein, Heide Faeskorn-Woyke und Oliver Niggemann. 2019. Evaluation of Cognitive Architectures for Cyber-Physical Production Systems. In: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), hg. von Institute of Electrical and Electronics Engineers und Universidad de Zaragoza , 729–736. IEEE International Conference on Emerging Technologies and Factory Automation-ETFA. [Piscataway, NJ]: IEEE. doi:10.1109/etfa.2019.8869038, .' din1505-2-1: 'Bunte, Andreas ; Fischbach, Andreas ; Strohschein, Jan ; Bartz-Beielstein, Thomas ; Faeskorn-Woyke, Heide ; Niggemann, Oliver: Evaluation of Cognitive Architectures for Cyber-Physical Production Systems. In: Institute of Electrical and Electronics Engineers ; Universidad de Zaragoza (Hrsg.): 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), IEEE International Conference on Emerging Technologies and Factory Automation-ETFA. [Piscataway, NJ] : IEEE, 2019, S. 729–736' havard: 'A. Bunte, A. Fischbach, J. Strohschein, T. Bartz-Beielstein, H. Faeskorn-Woyke, O. Niggemann, Evaluation of Cognitive Architectures for Cyber-Physical Production Systems, in: Institute of Electrical and Electronics Engineers, Universidad de Zaragoza (Eds.), 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), IEEE, [Piscataway, NJ], 2019: pp. 729–736.' ieee: 'A. Bunte, A. Fischbach, J. Strohschein, T. Bartz-Beielstein, H. Faeskorn-Woyke, and O. Niggemann, “Evaluation of Cognitive Architectures for Cyber-Physical Production Systems,” in 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Zaragoza, SPAIN, 2019, pp. 729–736. doi: 10.1109/etfa.2019.8869038.' mla: Bunte, Andreas, et al. “Evaluation of Cognitive Architectures for Cyber-Physical Production Systems.” 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), edited by Institute of Electrical and Electronics Engineers and Universidad de Zaragoza , IEEE, 2019, pp. 729–36, https://doi.org/10.1109/etfa.2019.8869038. short: 'A. Bunte, A. Fischbach, J. Strohschein, T. Bartz-Beielstein, H. Faeskorn-Woyke, O. Niggemann, in: Institute of Electrical and Electronics Engineers, Universidad de Zaragoza (Eds.), 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), IEEE, [Piscataway, NJ], 2019, pp. 729–736.' ufg: 'Bunte, Andreas u. a.: Evaluation of Cognitive Architectures for Cyber-Physical Production Systems, in: Institute of Electrical and Electronics Engineers, Universidad de Zaragoza (Hgg.): 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), [Piscataway, NJ] 2019 (IEEE International Conference on Emerging Technologies and Factory Automation-ETFA),  S. 729–736.' van: 'Bunte A, Fischbach A, Strohschein J, Bartz-Beielstein T, Faeskorn-Woyke H, Niggemann O. Evaluation of Cognitive Architectures for Cyber-Physical Production Systems. In: Institute of Electrical and Electronics Engineers, Universidad de Zaragoza , editors. 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). [Piscataway, NJ]: IEEE; 2019. p. 729–36. (IEEE International Conference on Emerging Technologies and Factory Automation-ETFA).' conference: end_date: 2019-09-13 location: Zaragoza, SPAIN name: 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) start_date: 2019-09-10 corporate_editor: - Institute of Electrical and Electronics Engineers - 'Universidad de Zaragoza ' date_created: 2021-02-02T08:10:37Z date_updated: 2025-06-26T13:32:54Z department: - _id: DEP5023 doi: 10.1109/etfa.2019.8869038 keyword: - Reference Architecture - Cognition - Industrie 4.0 language: - iso: eng page: 729-736 place: '[Piscataway, NJ]' publication: 24nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) publication_identifier: eissn: - 1946-0759 isbn: - 978-1-7281-0303-7 issn: - 1946-0740 publication_status: published publisher: IEEE series_title: IEEE International Conference on Emerging Technologies and Factory Automation-ETFA status: public title: Evaluation of Cognitive Architectures for Cyber-Physical Production Systems type: conference user_id: '83781' year: '2019' ... --- _id: '4784' author: - first_name: Andreas full_name: Bunte, Andreas id: '58885' last_name: Bunte - first_name: Andreas full_name: Fischbach, Andreas last_name: Fischbach - first_name: Jan full_name: Strohschein, Jan last_name: Strohschein - first_name: Thomas full_name: Bartz-Beielstein, Thomas last_name: Bartz-Beielstein - first_name: Heide full_name: Faeskorn-Woyke, Heide last_name: Faeskorn-Woyke - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann citation: ama: Bunte A, Fischbach A, Strohschein J, Bartz-Beielstein T, Faeskorn-Woyke H, Niggemann O. Evaluation of Cognitive Architectures for Cyber-Physical ProductionSystems. arXiv e-prints. 2019. apa: Bunte, A., Fischbach, A., Strohschein, J., Bartz-Beielstein, T., Faeskorn-Woyke, H., & Niggemann, O. (2019). Evaluation of Cognitive Architectures for Cyber-Physical ProductionSystems. ArXiv E-Prints. bjps: Bunte A et al. (2019) Evaluation of Cognitive Architectures for Cyber-Physical ProductionSystems. arXiv e-prints. chicago: Bunte, Andreas, Andreas Fischbach, Jan Strohschein, Thomas Bartz-Beielstein, Heide Faeskorn-Woyke, and Oliver Niggemann. “Evaluation of Cognitive Architectures for Cyber-Physical ProductionSystems.” ArXiv E-Prints, 2019. chicago-de: Bunte, Andreas, Andreas Fischbach, Jan Strohschein, Thomas Bartz-Beielstein, Heide Faeskorn-Woyke und Oliver Niggemann. 2019. Evaluation of Cognitive Architectures for Cyber-Physical ProductionSystems. arXiv e-prints. din1505-2-1: 'Bunte, Andreas ; Fischbach, Andreas ; Strohschein, Jan ; Bartz-Beielstein, Thomas ; Faeskorn-Woyke, Heide ; Niggemann, Oliver: Evaluation of Cognitive Architectures for Cyber-Physical ProductionSystems. In: arXiv e-prints (2019)' havard: A. Bunte, A. Fischbach, J. Strohschein, T. Bartz-Beielstein, H. Faeskorn-Woyke, O. Niggemann, Evaluation of Cognitive Architectures for Cyber-Physical ProductionSystems, ArXiv E-Prints. (2019). ieee: A. Bunte, A. Fischbach, J. Strohschein, T. Bartz-Beielstein, H. Faeskorn-Woyke, and O. Niggemann, “Evaluation of Cognitive Architectures for Cyber-Physical ProductionSystems,” arXiv e-prints, 2019. mla: Bunte, Andreas, et al. “Evaluation of Cognitive Architectures for Cyber-Physical ProductionSystems.” ArXiv E-Prints, 2019. short: A. Bunte, A. Fischbach, J. Strohschein, T. Bartz-Beielstein, H. Faeskorn-Woyke, O. Niggemann, ArXiv E-Prints (2019). ufg: 'Bunte, Andreas et. al. (2019): Evaluation of Cognitive Architectures for Cyber-Physical ProductionSystems, in: arXiv e-prints.' van: Bunte A, Fischbach A, Strohschein J, Bartz-Beielstein T, Faeskorn-Woyke H, Niggemann O. Evaluation of Cognitive Architectures for Cyber-Physical ProductionSystems. arXiv e-prints. 2019; date_created: 2021-02-02T08:16:16Z date_updated: 2023-03-15T13:49:55Z department: - _id: DEP5023 language: - iso: eng publication: arXiv e-prints status: public title: Evaluation of Cognitive Architectures for Cyber-Physical ProductionSystems type: journal_article user_id: '68554' year: 2019 ... --- _id: '4785' author: - first_name: Andreas full_name: Bunte, Andreas id: '58885' last_name: Bunte - first_name: Benno full_name: Stein, Benno last_name: Stein - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann citation: ama: 'Bunte A, Stein B, Niggemann O. Model-Based Diagnosis for Cyber-Physical Production Systems Based on Machine Learning and Residual-Based Diagnosis Models. In: Hawaii, USA: Thirty-Third AAAI Conference on Artificial Intelligence (AAAI-19); 2019.' apa: 'Bunte, A., Stein, B., & Niggemann, O. (2019). Model-Based Diagnosis for Cyber-Physical Production Systems Based on Machine Learning and Residual-Based Diagnosis Models. Hawaii, USA: Thirty-Third AAAI Conference on Artificial Intelligence (AAAI-19).' bjps: 'Bunte A, Stein B and Niggemann O (2019) Model-Based Diagnosis for Cyber-Physical Production Systems Based on Machine Learning and Residual-Based Diagnosis Models. Hawaii, USA: Thirty-Third AAAI Conference on Artificial Intelligence (AAAI-19).' chicago: 'Bunte, Andreas, Benno Stein, and Oliver Niggemann. “Model-Based Diagnosis for Cyber-Physical Production Systems Based on Machine Learning and Residual-Based Diagnosis Models.” Hawaii, USA: Thirty-Third AAAI Conference on Artificial Intelligence (AAAI-19), 2019.' chicago-de: 'Bunte, Andreas, Benno Stein und Oliver Niggemann. 2019. Model-Based Diagnosis for Cyber-Physical Production Systems Based on Machine Learning and Residual-Based Diagnosis Models. In: . Hawaii, USA: Thirty-Third AAAI Conference on Artificial Intelligence (AAAI-19).' din1505-2-1: 'Bunte, Andreas ; Stein, Benno ; Niggemann, Oliver: Model-Based Diagnosis for Cyber-Physical Production Systems Based on Machine Learning and Residual-Based Diagnosis Models. In: . Hawaii, USA : Thirty-Third AAAI Conference on Artificial Intelligence (AAAI-19), 2019' havard: 'A. Bunte, B. Stein, O. Niggemann, Model-Based Diagnosis for Cyber-Physical Production Systems Based on Machine Learning and Residual-Based Diagnosis Models, in: Thirty-Third AAAI Conference on Artificial Intelligence (AAAI-19), Hawaii, USA, 2019.' ieee: A. Bunte, B. Stein, and O. Niggemann, “Model-Based Diagnosis for Cyber-Physical Production Systems Based on Machine Learning and Residual-Based Diagnosis Models,” 2019. mla: Bunte, Andreas, et al. Model-Based Diagnosis for Cyber-Physical Production Systems Based on Machine Learning and Residual-Based Diagnosis Models. Thirty-Third AAAI Conference on Artificial Intelligence (AAAI-19), 2019. short: 'A. Bunte, B. Stein, O. Niggemann, in: Thirty-Third AAAI Conference on Artificial Intelligence (AAAI-19), Hawaii, USA, 2019.' ufg: 'Bunte, Andreas et. al. (2019): Model-Based Diagnosis for Cyber-Physical Production Systems Based on Machine Learning and Residual-Based Diagnosis Models, in: , Hawaii, USA.' van: 'Bunte A, Stein B, Niggemann O. Model-Based Diagnosis for Cyber-Physical Production Systems Based on Machine Learning and Residual-Based Diagnosis Models. In Hawaii, USA: Thirty-Third AAAI Conference on Artificial Intelligence (AAAI-19); 2019.' date_created: 2021-02-02T08:18:13Z date_updated: 2023-03-15T13:49:55Z department: - _id: DEP5023 language: - iso: eng place: Hawaii, USA publisher: Thirty-Third AAAI Conference on Artificial Intelligence (AAAI-19) status: public title: Model-Based Diagnosis for Cyber-Physical Production Systems Based on Machine Learning and Residual-Based Diagnosis Models type: conference user_id: '68554' year: 2019 ... --- _id: '12808' abstract: - lang: eng text: Along with the constantly increasing complexity of industrial automation systems, machine learning methods have been widely applied to detecting abnormal states in such systems. Anomaly detection tasks can be treated as one-class classification problems in machine learning. Geometric methods can give an intuitive solution to such problems. In this paper, we propose a new geometric structure, oriented non-convex hulls, to represent decision boundaries used for one-class classification. Based on this geometric structure, a novel boundary based one-class classification algorithm is developed to solve the anomaly detection problem. Compared with traditional boundary-based approaches such as convex hulls based methods and one-class support vector machines, the proposed approach can better reflect the true geometry of target data and needs little effort for parameter tuning. The effectiveness of this approach is evaluated with artificial and real world data sets to solve the anomaly detection problem in Cyber-Physical-Production-Systems (CPPS). The evaluation results also show that the proposed approach has higher generality than the used baseline algorithms. article_number: '103301' author: - first_name: Peng full_name: Li, Peng id: '58937' last_name: Li - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann citation: ama: Li P, Niggemann O. Non-convex hull based anomaly detection in CPPS. Engineering Applications of Artificial Intelligence. 2019;87. doi:10.1016/j.engappai.2019.103301 apa: Li, P., & Niggemann, O. (2019). Non-convex hull based anomaly detection in CPPS. Engineering Applications of Artificial Intelligence, 87, Article 103301. https://doi.org/10.1016/j.engappai.2019.103301 bjps: Li P and Niggemann O (2019) Non-Convex Hull Based Anomaly Detection in CPPS. Engineering Applications of Artificial Intelligence 87. chicago: Li, Peng, and Oliver Niggemann. “Non-Convex Hull Based Anomaly Detection in CPPS.” Engineering Applications of Artificial Intelligence 87 (2019). https://doi.org/10.1016/j.engappai.2019.103301. chicago-de: Li, Peng und Oliver Niggemann. 2019. Non-convex hull based anomaly detection in CPPS. Engineering Applications of Artificial Intelligence 87. doi:10.1016/j.engappai.2019.103301, . din1505-2-1: 'Li, Peng ; Niggemann, Oliver: Non-convex hull based anomaly detection in CPPS. In: Engineering Applications of Artificial Intelligence Bd. 87. Amsterdam [u.a.], Elsevier BV (2019)' havard: P. Li, O. Niggemann, Non-convex hull based anomaly detection in CPPS, Engineering Applications of Artificial Intelligence. 87 (2019). ieee: 'P. Li and O. Niggemann, “Non-convex hull based anomaly detection in CPPS,” Engineering Applications of Artificial Intelligence, vol. 87, Art. no. 103301, 2019, doi: 10.1016/j.engappai.2019.103301.' mla: Li, Peng, and Oliver Niggemann. “Non-Convex Hull Based Anomaly Detection in CPPS.” Engineering Applications of Artificial Intelligence, vol. 87, 103301, 2019, https://doi.org/10.1016/j.engappai.2019.103301. short: P. Li, O. Niggemann, Engineering Applications of Artificial Intelligence 87 (2019). ufg: 'Li, Peng/Niggemann, Oliver: Non-convex hull based anomaly detection in CPPS, in: Engineering Applications of Artificial Intelligence 87 (2019).' van: Li P, Niggemann O. Non-convex hull based anomaly detection in CPPS. Engineering Applications of Artificial Intelligence. 2019;87. date_created: 2025-04-16T09:51:12Z date_updated: 2025-06-26T13:34:10Z department: - _id: DEP5023 doi: 10.1016/j.engappai.2019.103301 external_id: isi: - '000506715100040' intvolume: ' 87' isi: '1' keyword: - One-class classification - n-dimensional oriented non-convex hull - Anomaly detection - CPPS language: - iso: eng place: Amsterdam [u.a.] publication: Engineering Applications of Artificial Intelligence publication_identifier: eissn: - 1873-6769 issn: - 0952-1976 publication_status: published publisher: Elsevier BV status: public title: Non-convex hull based anomaly detection in CPPS type: scientific_journal_article user_id: '83781' volume: 87 year: '2019' ... --- _id: '4327' abstract: - lang: eng text: In ever changing world, the industrial systems become more and more complex. Machine feedback in the form of alarms and notifications, due to its growing volume, becomes overwhelming for the operator. In addition, expectations in relation to system availability are growing as well. Therefore, there exists strong need for new solutions guaranteeing fast troubleshooting of problems that arise during system operation. The approach proposed in this study uses advantages of the Asset Administration Shell, machine learning, and human-machine interaction in order to create the assistance system which holistically addresses the issue of troubleshooting complex industrial systems. author: - first_name: Dorota full_name: Lang, Dorota id: '68941' last_name: Lang - first_name: Paul full_name: Wunderlich, Paul id: '52317' last_name: Wunderlich - first_name: Mario full_name: Heinz, Mario id: '68913' last_name: Heinz - first_name: Lukasz full_name: Wisniewski, Lukasz id: '1710' last_name: Wisniewski - first_name: Jürgen full_name: Jasperneite, Jürgen id: '1899' last_name: Jasperneite - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Carsten full_name: Röcker, Carsten id: '61525' last_name: Röcker citation: ama: 'Lang D, Wunderlich P, Heinz M, et al. Assistance System to Support Troubleshooting of Complex Industrial Systems. In: 14th IEEE International Workshop on Factory Communication Systems (WFCS). Piscataway, NJ: IEEE; 2018. doi:10.1109/WFCS.2018.8402380' apa: 'Lang, D., Wunderlich, P., Heinz, M., Wisniewski, L., Jasperneite, J., Niggemann, O., & Röcker, C. (2018). Assistance System to Support Troubleshooting of Complex Industrial Systems. In 14th IEEE International Workshop on Factory Communication Systems (WFCS). Piscataway, NJ: IEEE. https://doi.org/10.1109/WFCS.2018.8402380' bjps: 'Lang D et al. (2018) Assistance System to Support Troubleshooting of Complex Industrial Systems. 14th IEEE International Workshop on Factory Communication Systems (WFCS). Piscataway, NJ: IEEE.' chicago: 'Lang, Dorota, Paul Wunderlich, Mario Heinz, Lukasz Wisniewski, Jürgen Jasperneite, Oliver Niggemann, and Carsten Röcker. “Assistance System to Support Troubleshooting of Complex Industrial Systems.” In 14th IEEE International Workshop on Factory Communication Systems (WFCS). Piscataway, NJ: IEEE, 2018. https://doi.org/10.1109/WFCS.2018.8402380.' chicago-de: 'Lang, Dorota, Paul Wunderlich, Mario Heinz, Lukasz Wisniewski, Jürgen Jasperneite, Oliver Niggemann und Carsten Röcker. 2018. Assistance System to Support Troubleshooting of Complex Industrial Systems. In: 14th IEEE International Workshop on Factory Communication Systems (WFCS). Piscataway, NJ: IEEE. doi:10.1109/WFCS.2018.8402380, .' din1505-2-1: 'Lang, Dorota ; Wunderlich, Paul ; Heinz, Mario ; Wisniewski, Lukasz ; Jasperneite, Jürgen ; Niggemann, Oliver ; Röcker, Carsten: Assistance System to Support Troubleshooting of Complex Industrial Systems. In: 14th IEEE International Workshop on Factory Communication Systems (WFCS). Piscataway, NJ : IEEE, 2018' havard: 'D. Lang, P. Wunderlich, M. Heinz, L. Wisniewski, J. Jasperneite, O. Niggemann, C. Röcker, Assistance System to Support Troubleshooting of Complex Industrial Systems, in: 14th IEEE International Workshop on Factory Communication Systems (WFCS), IEEE, Piscataway, NJ, 2018.' ieee: D. Lang et al., “Assistance System to Support Troubleshooting of Complex Industrial Systems,” in 14th IEEE International Workshop on Factory Communication Systems (WFCS), Imperia, Italy , 2018. mla: Lang, Dorota, et al. “Assistance System to Support Troubleshooting of Complex Industrial Systems.” 14th IEEE International Workshop on Factory Communication Systems (WFCS), IEEE, 2018, doi:10.1109/WFCS.2018.8402380. short: 'D. Lang, P. Wunderlich, M. Heinz, L. Wisniewski, J. Jasperneite, O. Niggemann, C. Röcker, in: 14th IEEE International Workshop on Factory Communication Systems (WFCS), IEEE, Piscataway, NJ, 2018.' ufg: 'Lang, Dorota et. al. (2018): Assistance System to Support Troubleshooting of Complex Industrial Systems, in: 14th IEEE International Workshop on Factory Communication Systems (WFCS), Piscataway, NJ.' van: 'Lang D, Wunderlich P, Heinz M, Wisniewski L, Jasperneite J, Niggemann O, et al. Assistance System to Support Troubleshooting of Complex Industrial Systems. In: 14th IEEE International Workshop on Factory Communication Systems (WFCS). Piscataway, NJ: IEEE; 2018.' conference: end_date: 2018-06-15 location: 'Imperia, Italy ' name: 14th IEEE International Workshop on Factory Communication Systems (WFCS) start_date: 2018-06-13 date_created: 2021-01-08T08:26:30Z date_updated: 2023-03-15T13:49:52Z department: - _id: DEP5023 - _id: DEP5019 doi: 10.1109/WFCS.2018.8402380 keyword: - Maintenance engineering - Adaptation models - Machine learning - Data models - Standards - Software - Bayes methods language: - iso: eng main_file_link: - open_access: '1' oa: '1' place: Piscataway, NJ publication: 14th IEEE International Workshop on Factory Communication Systems (WFCS) publication_identifier: eisbn: - 978-1-5386-1066-4 publication_status: published publisher: IEEE status: public title: Assistance System to Support Troubleshooting of Complex Industrial Systems type: conference user_id: '45673' year: 2018 ... --- _id: '727' abstract: - lang: ger text: 'Produkte bestehen aus einer zunehmenden Anzahl unterschiedlicher Teile. Dieser Trend hängt mit einer steigenden Variantenanzahl und der Integration zusätzlicher Produktfunktionen zusammen. Dadurch steigen die Anforderungen an Kommissionierprozesse in der Montage. Es stellt sich daher die Frage der optimalen Anordnung der Teile, um unnötige Gehwege beim Kommissionieren zu vermeiden. Im Rahmen des Beitrages wird ein Optimierungsalgorithmus vorgestellt, mit dem Bauteile so klassifiziert werden, dass Gehwege reduziert werden können. ' author: - first_name: Philip full_name: Sehr, Philip id: '71582' last_name: Sehr - first_name: Sven full_name: Bendzioch, Sven id: '71395' last_name: Bendzioch - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann citation: ama: 'Sehr P, Bendzioch S, Niggemann O. Mathematische Optimierung der Teileanordnung in der Kommissionierung. Wissenschaftliche Berichte : wissenschaftliche Zeitschrift der Hochschule Mittweida (FH). 2018;(n.a.):18-21.' apa: 'Sehr, P., Bendzioch, S., & Niggemann, O. (2018). Mathematische Optimierung der Teileanordnung in der Kommissionierung. Wissenschaftliche Berichte : wissenschaftliche Zeitschrift der Hochschule Mittweida (FH), (n.a.), 18–21.' bjps: 'Sehr P, Bendzioch S and Niggemann O (2018) Mathematische Optimierung der Teileanordnung in der Kommissionierung. Wissenschaftliche Berichte : wissenschaftliche Zeitschrift der Hochschule Mittweida (FH) 18–21.' chicago: 'Sehr, Philip, Sven Bendzioch, and Oliver Niggemann. “Mathematische Optimierung der Teileanordnung in der Kommissionierung.” Wissenschaftliche Berichte : wissenschaftliche Zeitschrift der Hochschule Mittweida (FH), no. n.a. (2018): 18–21.' chicago-de: 'Sehr, Philip, Sven Bendzioch und Oliver Niggemann. 2018. Mathematische Optimierung der Teileanordnung in der Kommissionierung. Wissenschaftliche Berichte : wissenschaftliche Zeitschrift der Hochschule Mittweida (FH), Nr. n.a.: 18–21.' din1505-2-1: 'Sehr, Philip ; Bendzioch, Sven ; Niggemann, Oliver: Mathematische Optimierung der Teileanordnung in der Kommissionierung. In: Wissenschaftliche Berichte : wissenschaftliche Zeitschrift der Hochschule Mittweida (FH), Hochschule Mittweida (2018), Nr. n.a., S. 18–21' havard: 'P. Sehr, S. Bendzioch, O. Niggemann, Mathematische Optimierung der Teileanordnung in der Kommissionierung, Wissenschaftliche Berichte : wissenschaftliche Zeitschrift der Hochschule Mittweida (FH). (2018) 18–21.' ieee: 'P. Sehr, S. Bendzioch, and O. Niggemann, “Mathematische Optimierung der Teileanordnung in der Kommissionierung,” Wissenschaftliche Berichte : wissenschaftliche Zeitschrift der Hochschule Mittweida (FH), no. n.a., pp. 18–21, 2018.' mla: 'Sehr, Philip, et al. “Mathematische Optimierung der Teileanordnung in der Kommissionierung.” Wissenschaftliche Berichte : wissenschaftliche Zeitschrift der Hochschule Mittweida (FH), no. n.a., Hochschule Mittweida, 2018, pp. 18–21.' short: 'P. Sehr, S. Bendzioch, O. Niggemann, Wissenschaftliche Berichte : wissenschaftliche Zeitschrift der Hochschule Mittweida (FH) (2018) 18–21.' ufg: 'Sehr, Philip et. al. (2018): Mathematische Optimierung der Teileanordnung in der Kommissionierung, in: Wissenschaftliche Berichte : wissenschaftliche Zeitschrift der Hochschule Mittweida (FH) (n.a.), S. 18–21.' van: 'Sehr P, Bendzioch S, Niggemann O. Mathematische Optimierung der Teileanordnung in der Kommissionierung. Wissenschaftliche Berichte : wissenschaftliche Zeitschrift der Hochschule Mittweida (FH). 2018;(n.a.):18–21.' conference: end_date: 2018-10-25 location: Mittweida name: 25. Interdisziplinäre Wissenschaftliche Konferenz Mittweida start_date: 2018-10-24 date_created: 2019-03-13T09:23:54Z date_updated: 2023-03-15T13:50:09Z issue: n.a. language: - iso: ger page: 18-21 project: - _id: FBB6D104-44D9-11E9-AA25-B54CDB794CE1 name: Montexas 4.0 publication: 'Wissenschaftliche Berichte : wissenschaftliche Zeitschrift der Hochschule Mittweida (FH)' publication_identifier: issn: - 1437-7624 publication_status: published publisher: Hochschule Mittweida status: public title: Mathematische Optimierung der Teileanordnung in der Kommissionierung type: journal_article user_id: '74004' year: 2018 ... --- _id: '5630' author: - first_name: 'F. P. ' full_name: 'Conradi, F. P. ' last_name: Conradi - first_name: Patrick full_name: Wefing, Patrick id: '68976' last_name: Wefing - first_name: K. full_name: Pinkal, K. last_name: Pinkal - first_name: Fan full_name: Zhang, Fan id: '71479' last_name: Zhang - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Jan full_name: Schneider, Jan id: '13209' last_name: Schneider orcid: 0000-0001-6401-8873 citation: ama: 'Conradi FP, Wefing P, Pinkal K, Zhang F, Niggemann O, Schneider J. Inline progress measurement of the ß-amylase rest in the mashing process employing a near infrared transflectance probe. In: ; 2018.' apa: Conradi, F. P., Wefing, P., Pinkal, K., Zhang, F., Niggemann, O., & Schneider, J. (2018). Inline progress measurement of the ß-amylase rest in the mashing process employing a near infrared transflectance probe. 13th Trends in Brewing 2018, Gent. bjps: Conradi FP et al. (2018) Inline Progress Measurement of the SS-Amylase Rest in the Mashing Process Employing a near Infrared Transflectance Probe. chicago: Conradi, F. P. , Patrick Wefing, K. Pinkal, Fan Zhang, Oliver Niggemann, and Jan Schneider. “Inline Progress Measurement of the SS-Amylase Rest in the Mashing Process Employing a near Infrared Transflectance Probe,” 2018. chicago-de: 'Conradi, F. P. , Patrick Wefing, K. Pinkal, Fan Zhang, Oliver Niggemann und Jan Schneider. 2018. Inline progress measurement of the ß-amylase rest in the mashing process employing a near infrared transflectance probe. In: .' din1505-2-1: 'Conradi, F. P. ; Wefing, Patrick ; Pinkal, K. ; Zhang, Fan ; Niggemann, Oliver ; Schneider, Jan: Inline progress measurement of the ß-amylase rest in the mashing process employing a near infrared transflectance probe. In: , 2018' havard: 'F.P. Conradi, P. Wefing, K. Pinkal, F. Zhang, O. Niggemann, J. Schneider, Inline progress measurement of the ß-amylase rest in the mashing process employing a near infrared transflectance probe, in: 2018.' ieee: F. P. Conradi, P. Wefing, K. Pinkal, F. Zhang, O. Niggemann, and J. Schneider, “Inline progress measurement of the ß-amylase rest in the mashing process employing a near infrared transflectance probe,” presented at the 13th Trends in Brewing 2018, Gent, 2018. mla: Conradi, F. P., et al. Inline Progress Measurement of the SS-Amylase Rest in the Mashing Process Employing a near Infrared Transflectance Probe. 2018. short: 'F.P. Conradi, P. Wefing, K. Pinkal, F. Zhang, O. Niggemann, J. Schneider, in: 2018.' ufg: 'Conradi, F.P. u. a.: Inline progress measurement of the ß-amylase rest in the mashing process employing a near infrared transflectance probe, in: o. Hg.: o. O. 2018.' van: Conradi FP, Wefing P, Pinkal K, Zhang F, Niggemann O, Schneider J. Inline progress measurement of the ß-amylase rest in the mashing process employing a near infrared transflectance probe. In 2018. conference: end_date: 2018-04-12 location: Gent name: 13th Trends in Brewing 2018 start_date: 2018-04-08 date_created: 2021-04-20T12:55:03Z date_updated: 2024-05-22T15:32:48Z department: - _id: DEP1308 - _id: DEP4018 language: - iso: eng status: public title: Inline progress measurement of the ß-amylase rest in the mashing process employing a near infrared transflectance probe type: conference_abstract user_id: '83779' year: '2018' ... --- _id: '5631' author: - first_name: Patrick full_name: Wefing, Patrick id: '68976' last_name: Wefing - first_name: 'F. P. ' full_name: 'Conradi, F. P. ' last_name: Conradi - first_name: Lara full_name: Fuchs, Lara id: '63911' last_name: Fuchs - first_name: 'J. W. ' full_name: 'Schoppmeier, J. W. ' last_name: Schoppmeier - first_name: K. full_name: Pinkal, K. last_name: Pinkal - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Jan full_name: Schneider, Jan id: '13209' last_name: Schneider orcid: 0000-0001-6401-8873 citation: ama: 'Wefing P, Conradi FP, Fuchs L, et al. Laboratory plant for a closed loop-controlled continuous (CLCC) mashing. In: ; 2018.' apa: Wefing, P., Conradi, F. P., Fuchs, L., Schoppmeier, J. W., Pinkal, K., Niggemann, O., & Schneider, J. (2018). Laboratory plant for a closed loop-controlled continuous (CLCC) mashing. 13th Trends in Brewing 2018, Gent. bjps: Wefing P et al. (2018) Laboratory Plant for a Closed Loop-Controlled Continuous (CLCC) Mashing. chicago: Wefing, Patrick, F. P. Conradi, Lara Fuchs, J. W. Schoppmeier, K. Pinkal, Oliver Niggemann, and Jan Schneider. “Laboratory Plant for a Closed Loop-Controlled Continuous (CLCC) Mashing,” 2018. chicago-de: 'Wefing, Patrick, F. P. Conradi, Lara Fuchs, J. W. Schoppmeier, K. Pinkal, Oliver Niggemann und Jan Schneider. 2018. Laboratory plant for a closed loop-controlled continuous (CLCC) mashing. In: .' din1505-2-1: 'Wefing, Patrick ; Conradi, F. P. ; Fuchs, Lara ; Schoppmeier, J. W. ; Pinkal, K. ; Niggemann, Oliver ; Schneider, Jan: Laboratory plant for a closed loop-controlled continuous (CLCC) mashing. In: , 2018' havard: 'P. Wefing, F.P. Conradi, L. Fuchs, J.W. Schoppmeier, K. Pinkal, O. Niggemann, J. Schneider, Laboratory plant for a closed loop-controlled continuous (CLCC) mashing, in: 2018.' ieee: P. Wefing et al., “Laboratory plant for a closed loop-controlled continuous (CLCC) mashing,” presented at the 13th Trends in Brewing 2018, Gent, 2018. mla: Wefing, Patrick, et al. Laboratory Plant for a Closed Loop-Controlled Continuous (CLCC) Mashing. 2018. short: 'P. Wefing, F.P. Conradi, L. Fuchs, J.W. Schoppmeier, K. Pinkal, O. Niggemann, J. Schneider, in: 2018.' ufg: 'Wefing, Patrick u. a.: Laboratory plant for a closed loop-controlled continuous (CLCC) mashing, in: o. Hg.: o. O. 2018.' van: Wefing P, Conradi FP, Fuchs L, Schoppmeier JW, Pinkal K, Niggemann O, et al. Laboratory plant for a closed loop-controlled continuous (CLCC) mashing. In 2018. conference: end_date: 2018-04-12 location: Gent name: 13th Trends in Brewing 2018 start_date: 2018-04-08 date_created: 2021-04-20T13:00:06Z date_updated: 2024-05-22T15:33:26Z department: - _id: DEP1308 - _id: DEP4018 language: - iso: eng status: public title: Laboratory plant for a closed loop-controlled continuous (CLCC) mashing type: conference_abstract user_id: '83779' year: '2018' ... --- _id: '5633' author: - first_name: 'F. P. ' full_name: 'Conradi, F. P. ' last_name: Conradi - first_name: Patrick full_name: Wefing, Patrick id: '68976' last_name: Wefing - first_name: K. full_name: Pinkal, K. last_name: Pinkal - first_name: Fan full_name: Zhang, Fan id: '71479' last_name: Zhang - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Jan full_name: Schneider, Jan id: '13209' last_name: Schneider orcid: 0000-0001-6401-8873 citation: ama: 'Conradi FP, Wefing P, Pinkal K, Zhang F, Niggemann O, Schneider J. Inline progress measurement of the ß-amylase rest in the mashing process employing a near infrared transflectance probe. In: ; 2018.' apa: Conradi, F. P., Wefing, P., Pinkal, K., Zhang, F., Niggemann, O., & Schneider, J. (2018). Inline progress measurement of the ß-amylase rest in the mashing process employing a near infrared transflectance probe. 47. Deutscher Lebensmittelchemikertag 2018, Berlin. bjps: Conradi FP et al. (2018) Inline Progress Measurement of the SS-Amylase Rest in the Mashing Process Employing a near Infrared Transflectance Probe. chicago: Conradi, F. P. , Patrick Wefing, K. Pinkal, Fan Zhang, Oliver Niggemann, and Jan Schneider. “Inline Progress Measurement of the SS-Amylase Rest in the Mashing Process Employing a near Infrared Transflectance Probe,” 2018. chicago-de: 'Conradi, F. P. , Patrick Wefing, K. Pinkal, Fan Zhang, Oliver Niggemann und Jan Schneider. 2018. Inline progress measurement of the ß-amylase rest in the mashing process employing a near infrared transflectance probe. In: .' din1505-2-1: 'Conradi, F. P. ; Wefing, Patrick ; Pinkal, K. ; Zhang, Fan ; Niggemann, Oliver ; Schneider, Jan: Inline progress measurement of the ß-amylase rest in the mashing process employing a near infrared transflectance probe. In: , 2018' havard: 'F.P. Conradi, P. Wefing, K. Pinkal, F. Zhang, O. Niggemann, J. Schneider, Inline progress measurement of the ß-amylase rest in the mashing process employing a near infrared transflectance probe, in: 2018.' ieee: F. P. Conradi, P. Wefing, K. Pinkal, F. Zhang, O. Niggemann, and J. Schneider, “Inline progress measurement of the ß-amylase rest in the mashing process employing a near infrared transflectance probe,” presented at the 47. Deutscher Lebensmittelchemikertag 2018, Berlin, 2018. mla: Conradi, F. P., et al. Inline Progress Measurement of the SS-Amylase Rest in the Mashing Process Employing a near Infrared Transflectance Probe. 2018. short: 'F.P. Conradi, P. Wefing, K. Pinkal, F. Zhang, O. Niggemann, J. Schneider, in: 2018.' ufg: 'Conradi, F.P. u. a.: Inline progress measurement of the ß-amylase rest in the mashing process employing a near infrared transflectance probe, in: o. Hg.: o. O. 2018.' van: Conradi FP, Wefing P, Pinkal K, Zhang F, Niggemann O, Schneider J. Inline progress measurement of the ß-amylase rest in the mashing process employing a near infrared transflectance probe. In 2018. conference: end_date: 2018-09-19 location: Berlin name: 47. Deutscher Lebensmittelchemikertag 2018 start_date: 2018-09-17 date_created: 2021-04-20T12:55:03Z date_updated: 2024-05-22T16:08:39Z department: - _id: DEP1308 - _id: DEP4018 language: - iso: eng status: public title: Inline progress measurement of the ß-amylase rest in the mashing process employing a near infrared transflectance probe type: conference_abstract user_id: '83779' year: '2018' ... --- _id: '4787' author: - first_name: Andreas full_name: Bunte, Andreas id: '58885' last_name: Bunte - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Benno full_name: Stein, Benno last_name: Stein citation: ama: 'Bunte A, Niggemann O, Stein B. Integrating OWL Ontologies for Smart Services into AutomationML and OPC UA. In: 23th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). ; 2018.' apa: Bunte, A., Niggemann, O., & Stein, B. (2018). Integrating OWL Ontologies for Smart Services into AutomationML and OPC UA. In 23th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). bjps: Bunte A, Niggemann O and Stein B (2018) Integrating OWL Ontologies for Smart Services into AutomationML and OPC UA. 23th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). chicago: Bunte, Andreas, Oliver Niggemann, and Benno Stein. “Integrating OWL Ontologies for Smart Services into AutomationML and OPC UA.” In 23th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2018. chicago-de: 'Bunte, Andreas, Oliver Niggemann und Benno Stein. 2018. Integrating OWL Ontologies for Smart Services into AutomationML and OPC UA. In: 23th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA).' din1505-2-1: 'Bunte, Andreas ; Niggemann, Oliver ; Stein, Benno: Integrating OWL Ontologies for Smart Services into AutomationML and OPC UA. In: 23th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2018' havard: 'A. Bunte, O. Niggemann, B. Stein, Integrating OWL Ontologies for Smart Services into AutomationML and OPC UA, in: 23th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2018.' ieee: A. Bunte, O. Niggemann, and B. Stein, “Integrating OWL Ontologies for Smart Services into AutomationML and OPC UA,” in 23th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2018. mla: Bunte, Andreas, et al. “Integrating OWL Ontologies for Smart Services into AutomationML and OPC UA.” 23th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2018. short: 'A. Bunte, O. Niggemann, B. Stein, in: 23th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2018.' ufg: 'Bunte, Andreas et. al. (2018): Integrating OWL Ontologies for Smart Services into AutomationML and OPC UA, in: 23th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA).' van: 'Bunte A, Niggemann O, Stein B. Integrating OWL Ontologies for Smart Services into AutomationML and OPC UA. In: 23th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). 2018.' date_created: 2021-02-02T08:22:28Z date_updated: 2023-03-15T13:49:55Z department: - _id: DEP5023 language: - iso: eng publication: 23th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) status: public title: Integrating OWL Ontologies for Smart Services into AutomationML and OPC UA type: conference user_id: '68554' year: 2018 ... --- _id: '4788' author: - first_name: Andreas full_name: Bunte, Andreas id: '58885' last_name: Bunte - first_name: Peng full_name: Li, Peng id: '58937' last_name: Li - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann citation: ama: 'Bunte A, Li P, Niggemann O. Mapping Data Sets to Concepts Using Machine Learning and a Knowledge Based Approach. In: International Conference on Agents and Artificial Intelligence (ICAART). Madeira, Portugal: SCITEPRESS; 2018.' apa: 'Bunte, A., Li, P., & Niggemann, O. (2018). Mapping Data Sets to Concepts Using Machine Learning and a Knowledge Based Approach. In International Conference on Agents and Artificial Intelligence (ICAART). Madeira, Portugal: SCITEPRESS.' bjps: 'Bunte A, Li P and Niggemann O (2018) Mapping Data Sets to Concepts Using Machine Learning and a Knowledge Based Approach. International Conference on Agents and Artificial Intelligence (ICAART). Madeira, Portugal: SCITEPRESS.' chicago: 'Bunte, Andreas, Peng Li, and Oliver Niggemann. “Mapping Data Sets to Concepts Using Machine Learning and a Knowledge Based Approach.” In International Conference on Agents and Artificial Intelligence (ICAART). Madeira, Portugal: SCITEPRESS, 2018.' chicago-de: 'Bunte, Andreas, Peng Li und Oliver Niggemann. 2018. Mapping Data Sets to Concepts Using Machine Learning and a Knowledge Based Approach. In: International Conference on Agents and Artificial Intelligence (ICAART). Madeira, Portugal: SCITEPRESS.' din1505-2-1: 'Bunte, Andreas ; Li, Peng ; Niggemann, Oliver: Mapping Data Sets to Concepts Using Machine Learning and a Knowledge Based Approach. In: International Conference on Agents and Artificial Intelligence (ICAART). Madeira, Portugal : SCITEPRESS, 2018' havard: 'A. Bunte, P. Li, O. Niggemann, Mapping Data Sets to Concepts Using Machine Learning and a Knowledge Based Approach, in: International Conference on Agents and Artificial Intelligence (ICAART), SCITEPRESS, Madeira, Portugal, 2018.' ieee: A. Bunte, P. Li, and O. Niggemann, “Mapping Data Sets to Concepts Using Machine Learning and a Knowledge Based Approach,” in International Conference on Agents and Artificial Intelligence (ICAART), 2018. mla: Bunte, Andreas, et al. “Mapping Data Sets to Concepts Using Machine Learning and a Knowledge Based Approach.” International Conference on Agents and Artificial Intelligence (ICAART), SCITEPRESS, 2018. short: 'A. Bunte, P. Li, O. Niggemann, in: International Conference on Agents and Artificial Intelligence (ICAART), SCITEPRESS, Madeira, Portugal, 2018.' ufg: 'Bunte, Andreas et. al. (2018): Mapping Data Sets to Concepts Using Machine Learning and a Knowledge Based Approach, in: International Conference on Agents and Artificial Intelligence (ICAART), Madeira, Portugal.' van: 'Bunte A, Li P, Niggemann O. Mapping Data Sets to Concepts Using Machine Learning and a Knowledge Based Approach. In: International Conference on Agents and Artificial Intelligence (ICAART). Madeira, Portugal: SCITEPRESS; 2018.' date_created: 2021-02-02T08:23:30Z date_updated: 2023-03-15T13:49:55Z department: - _id: DEP5023 language: - iso: eng place: Madeira, Portugal publication: International Conference on Agents and Artificial Intelligence (ICAART) publisher: SCITEPRESS status: public title: Mapping Data Sets to Concepts Using Machine Learning and a Knowledge Based Approach type: conference user_id: '68554' year: 2018 ... --- _id: '4254' abstract: - lang: eng text: The current trend of integrating machines and factories into cyber-physical systems (CPS) creates an enormous complexity for operators of such systems. Especially the search for the root cause of cascading failures becomes highly time-consuming. Within this paper, we address the question on how to help human users to better and faster understand root causes of such situations. We propose a concept of interactive alarm flood reduction and present the implementation of a first vertical prototype for such a system. We consider this prototype as a first artifact to be discussed by the research community and aim towards an incremental further development of the system in order to support humans in complex error situations. author: - first_name: Sebastian full_name: Büttner, Sebastian id: '61868' last_name: Büttner - first_name: Paul full_name: Wunderlich, Paul id: '52317' last_name: Wunderlich - first_name: Mario full_name: Heinz, Mario id: '68913' last_name: Heinz - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Carsten full_name: Röcker, Carsten id: '61525' last_name: Röcker citation: ama: 'Büttner S, Wunderlich P, Heinz M, Niggemann O, Röcker C. Managing Complexity: Towards Intelligent Error-Handling Assistance Trough Interactive Alarm Flood Reduction. In: Holzinger A, ed. Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings. Vol 10410. Lecture Notes in Computer Science . Cham: Springer; 2017:69-82.' apa: 'Büttner, S., Wunderlich, P., Heinz, M., Niggemann, O., & Röcker, C. (2017). Managing Complexity: Towards Intelligent Error-Handling Assistance Trough Interactive Alarm Flood Reduction. In A. Holzinger (Ed.), Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings (Vol. 10410, pp. 69–82). Cham: Springer.' bjps: 'Büttner S et al. (2017) Managing Complexity: Towards Intelligent Error-Handling Assistance Trough Interactive Alarm Flood Reduction. In Holzinger A (ed.), Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, vol. 10410. Cham: Springer, pp. 69–82.' chicago: 'Büttner, Sebastian, Paul Wunderlich, Mario Heinz, Oliver Niggemann, and Carsten Röcker. “Managing Complexity: Towards Intelligent Error-Handling Assistance Trough Interactive Alarm Flood Reduction.” In Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, edited by Andreas Holzinger, 10410:69–82. Lecture Notes in Computer Science . Cham: Springer, 2017.' chicago-de: 'Büttner, Sebastian, Paul Wunderlich, Mario Heinz, Oliver Niggemann und Carsten Röcker. 2017. Managing Complexity: Towards Intelligent Error-Handling Assistance Trough Interactive Alarm Flood Reduction. In: Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, hg. von Andreas Holzinger, 10410:69–82. Lecture Notes in Computer Science . Cham: Springer.' din1505-2-1: 'Büttner, Sebastian ; Wunderlich, Paul ; Heinz, Mario ; Niggemann, Oliver ; Röcker, Carsten: Managing Complexity: Towards Intelligent Error-Handling Assistance Trough Interactive Alarm Flood Reduction. In: Holzinger, A. (Hrsg.): Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, Lecture Notes in Computer Science . Bd. 10410. Cham : Springer, 2017, S. 69–82' havard: 'S. Büttner, P. Wunderlich, M. Heinz, O. Niggemann, C. Röcker, Managing Complexity: Towards Intelligent Error-Handling Assistance Trough Interactive Alarm Flood Reduction, in: A. Holzinger (Ed.), Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, Springer, Cham, 2017: pp. 69–82.' ieee: 'S. Büttner, P. Wunderlich, M. Heinz, O. Niggemann, and C. Röcker, “Managing Complexity: Towards Intelligent Error-Handling Assistance Trough Interactive Alarm Flood Reduction,” in Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, Reggio, Italy, 2017, vol. 10410, pp. 69–82.' mla: 'Büttner, Sebastian, et al. “Managing Complexity: Towards Intelligent Error-Handling Assistance Trough Interactive Alarm Flood Reduction.” Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, edited by Andreas Holzinger, vol. 10410, Springer, 2017, pp. 69–82.' short: 'S. Büttner, P. Wunderlich, M. Heinz, O. Niggemann, C. Röcker, in: A. Holzinger (Ed.), Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings, Springer, Cham, 2017, pp. 69–82.' ufg: 'Büttner, Sebastian et. al. (2017): Managing Complexity: Towards Intelligent Error-Handling Assistance Trough Interactive Alarm Flood Reduction, in: Andreas Holzinger (Hg.): Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings (=Lecture Notes in Computer Science 10410), Cham, S. 69–82.' van: 'Büttner S, Wunderlich P, Heinz M, Niggemann O, Röcker C. Managing Complexity: Towards Intelligent Error-Handling Assistance Trough Interactive Alarm Flood Reduction. In: Holzinger A, editor. Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 84, 89, 129 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings. Cham: Springer; 2017. p. 69–82. (Lecture Notes in Computer Science ; vol. 10410).' conference: end_date: 2017-09-01 location: Reggio, Italy name: International Cross-Domain Conference, CD-MAKE 2017 start_date: 2017-08-29 date_created: 2020-12-10T13:40:04Z date_updated: 2023-03-15T13:49:51Z department: - _id: DEP5023 editor: - first_name: Andreas full_name: Holzinger, Andreas last_name: Holzinger intvolume: ' 10410' keyword: - Alarm flood reduction - Machine learning - Assistive system language: - iso: eng main_file_link: - open_access: '1' oa: '1' page: 69-82 place: Cham publication: ' Machine Learning and Knowledge Extraction : First IFIP TC 5, WG 8.4, 8.9, 12.9 International Cross-Domain Conference, CD-MAKE 2017, Reggio, Italy, August 29 – September 1, 2017, Proceedings' publication_identifier: eisbn: - '9783319668086 ' isbn: - 978-3-319-66807-9 publication_status: published publisher: Springer series_title: 'Lecture Notes in Computer Science ' status: public title: 'Managing Complexity: Towards Intelligent Error-Handling Assistance Trough Interactive Alarm Flood Reduction' type: conference user_id: '15514' volume: 10410 year: 2017 ... --- _id: '4595' author: - first_name: Florian full_name: Pethig, Florian last_name: Pethig - first_name: Sebastian full_name: Schriegel, Sebastian last_name: Schriegel - first_name: Alexander full_name: Maier, Alexander id: '11158' last_name: Maier - first_name: Jens full_name: Otto, Jens last_name: Otto - first_name: Stefan full_name: Windmann, Stefan id: '58525' last_name: Windmann - first_name: Björn full_name: Böttcher, Björn last_name: Böttcher - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Jürgen full_name: Jasperneite, Jürgen id: '1899' last_name: Jasperneite citation: ama: 'Pethig F, Schriegel S, Maier A, et al. Industrie 4.0 Communication Guideline Based on OPC UA. Frankfurt, Germany: VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V.; 2017.' apa: 'Pethig, F., Schriegel, S., Maier, A., Otto, J., Windmann, S., Böttcher, B., … Jasperneite, J. (2017). Industrie 4.0 Communication Guideline Based on OPC UA. Frankfurt, Germany: VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V.' bjps: 'Pethig F et al. (2017) Industrie 4.0 Communication Guideline Based on OPC UA. Frankfurt, Germany: VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V.' chicago: 'Pethig, Florian, Sebastian Schriegel, Alexander Maier, Jens Otto, Stefan Windmann, Björn Böttcher, Oliver Niggemann, and Jürgen Jasperneite. Industrie 4.0 Communication Guideline Based on OPC UA. Frankfurt, Germany: VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V., 2017.' chicago-de: 'Pethig, Florian, Sebastian Schriegel, Alexander Maier, Jens Otto, Stefan Windmann, Björn Böttcher, Oliver Niggemann und Jürgen Jasperneite. 2017. Industrie 4.0 Communication Guideline Based on OPC UA. Frankfurt, Germany: VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V.' din1505-2-1: 'Pethig, Florian ; Schriegel, Sebastian ; Maier, Alexander ; Otto, Jens ; Windmann, Stefan ; Böttcher, Björn ; Niggemann, Oliver ; Jasperneite, Jürgen: Industrie 4.0 Communication Guideline Based on OPC UA. Frankfurt, Germany : VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V., 2017' havard: 'F. Pethig, S. Schriegel, A. Maier, J. Otto, S. Windmann, B. Böttcher, O. Niggemann, J. Jasperneite, Industrie 4.0 Communication Guideline Based on OPC UA, VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V., Frankfurt, Germany, 2017.' ieee: 'F. Pethig et al., Industrie 4.0 Communication Guideline Based on OPC UA. Frankfurt, Germany: VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V., 2017.' mla: 'Pethig, Florian, et al. Industrie 4.0 Communication Guideline Based on OPC UA. VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V., 2017.' short: 'F. Pethig, S. Schriegel, A. Maier, J. Otto, S. Windmann, B. Böttcher, O. Niggemann, J. Jasperneite, Industrie 4.0 Communication Guideline Based on OPC UA, VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V., Frankfurt, Germany, 2017.' ufg: 'Pethig, Florian et. al. (2017): Industrie 4.0 Communication Guideline Based on OPC UA, Frankfurt, Germany.' van: 'Pethig F, Schriegel S, Maier A, Otto J, Windmann S, Böttcher B, et al. Industrie 4.0 Communication Guideline Based on OPC UA. Frankfurt, Germany: VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V.; 2017.' date_created: 2021-01-28T09:54:58Z date_updated: 2023-03-15T13:49:54Z department: - _id: DEP5023 - _id: DEP5019 language: - iso: eng main_file_link: - open_access: '1' oa: '1' place: Frankfurt, Germany publication_identifier: isbn: - ' 978-3-8163-0709-9' publication_status: published publisher: 'VDMA Guideline, Publisher: VDMA Verlag GmbH, Editor: Verband Deutscher Maschinen- und Anlagenbau e.V.' related_material: link: - relation: other url: https://www.researchgate.net/publication/316432275_Industrie-40-Kommunikation_mit_OPC_UA status: public title: Industrie 4.0 Communication Guideline Based on OPC UA type: book user_id: '15514' year: 2017 ... --- _id: '267' abstract: - lang: ger text: Sich verkürzende Innovations- und Produktlebenszyklen sowie eine zunehmende Variantenvielfalt verbunden mit kleineren Losgrößen bis hin zur kundenindividuellen Produktkonfiguration führen zu veränderten Anforderungen an die Gestaltung von Montagesystemen. Gleichzeitig bieten technologische Entwicklungen auf dem Gebiet der Assistenzsysteme neue Gestaltungsmöglichkeiten, Beschäftigte bei der Ausführung ihrer Arbeitsprozesse zu unterstützten. Der vorliegende Beitrag zeigt anhand eines Fallbeispiels, eines Montagearbeitsplatzes aus der SmartFactoryOWL in Lemgo, wie ein Montagearbeitsplatz über Assistenzfunktionen weiter entwickelt wurde und welche Auswirkungen diese Entwicklungen auf die Arbeit haben. Der Arbeitsplatz wurde im Rahmen eines Kooperationsprojektes des Labors für Industrial Engineering der Hochschule Ostwestfalen-Lippe und der Unternehmen Turck und Brandt Kantentechnik in der SmartFactory-OWL realisiert. Er verfügt über ein Assistenzsystem, welches dem Monteur auftrags- und arbeitsschrittbezogene Informationen bereitstellt. Das System besteht maßgeblich aus einem Pick-to-light System verbunden mit einem Touchscreen zur Visualisierung der Informationen. Der Montageauftrag wird über eine RFID-Applikation angemeldet. Damit lassen sich neue Produktvarianten flexibel hinzufügen und bestehende ändern. Zudem können die über Sensoren erfassten Daten zu Kennzahlen aggregiert und entsprechend der Anforderungen der Nutzer visualisiert werden. Im Rahmen des Beitrages werden die Auswirkungen dieser technologischen Weiterentwicklungen auf die Arbeit erörtert. author: - first_name: Tim full_name: Kleineberg, Tim id: '65024' last_name: Kleineberg - first_name: Sven full_name: Hinrichsen, Sven id: '49010' last_name: Hinrichsen - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann citation: ama: 'Kleineberg T, Hinrichsen S, Niggemann O. Auswirkungen von Assistenzsystemen auf die Arbeit in der manuellen Montage. In: Gesellschaft für Arbeitswissenschaft e.V (GfA), ed. Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V. Dortmund: GfA-Press; 2017.' apa: 'Kleineberg, T., Hinrichsen, S., & Niggemann, O. (2017). Auswirkungen von Assistenzsystemen auf die Arbeit in der manuellen Montage. In Gesellschaft für Arbeitswissenschaft e.V (GfA) (Ed.), Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V. Dortmund: GfA-Press.' bjps: 'Kleineberg T, Hinrichsen S and Niggemann O (2017) Auswirkungen von Assistenzsystemen auf die Arbeit in der manuellen Montage. In Gesellschaft für Arbeitswissenschaft e.V (GfA) (ed.), Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V. Dortmund: GfA-Press.' chicago: 'Kleineberg, Tim, Sven Hinrichsen, and Oliver Niggemann. “Auswirkungen von Assistenzsystemen auf die Arbeit in der manuellen Montage.” In Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V., edited by Gesellschaft für Arbeitswissenschaft e.V (GfA). Dortmund: GfA-Press, 2017.' chicago-de: 'Kleineberg, Tim, Sven Hinrichsen und Oliver Niggemann. 2017. Auswirkungen von Assistenzsystemen auf die Arbeit in der manuellen Montage. In: Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V., hg. von Gesellschaft für Arbeitswissenschaft e.V (GfA). Dortmund: GfA-Press.' din1505-2-1: 'Kleineberg, Tim ; Hinrichsen, Sven ; Niggemann, Oliver: Auswirkungen von Assistenzsystemen auf die Arbeit in der manuellen Montage. In: Gesellschaft für Arbeitswissenschaft e.V (GfA) (Hrsg.): Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V.. Dortmund : GfA-Press, 2017' havard: 'T. Kleineberg, S. Hinrichsen, O. Niggemann, Auswirkungen von Assistenzsystemen auf die Arbeit in der manuellen Montage, in: Gesellschaft für Arbeitswissenschaft e.V (GfA) (Ed.), Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V., GfA-Press, Dortmund, 2017.' ieee: T. Kleineberg, S. Hinrichsen, and O. Niggemann, “Auswirkungen von Assistenzsystemen auf die Arbeit in der manuellen Montage,” in Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V., Brugg-Windisch, 2017, no. 30. mla: Kleineberg, Tim, et al. “Auswirkungen von Assistenzsystemen auf die Arbeit in der manuellen Montage.” Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V., edited by Gesellschaft für Arbeitswissenschaft e.V (GfA), no. 30, GfA-Press, 2017. short: 'T. Kleineberg, S. Hinrichsen, O. Niggemann, in: Gesellschaft für Arbeitswissenschaft e.V (GfA) (Ed.), Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V., GfA-Press, Dortmund, 2017.' ufg: 'Kleineberg, Tim et. al. (2017): Auswirkungen von Assistenzsystemen auf die Arbeit in der manuellen Montage, in: Gesellschaft für Arbeitswissenschaft e.V (GfA) (Hg.): Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V., Dortmund.' van: 'Kleineberg T, Hinrichsen S, Niggemann O. Auswirkungen von Assistenzsystemen auf die Arbeit in der manuellen Montage. In: Gesellschaft für Arbeitswissenschaft e.V (GfA), editor. Bericht zum 63 Frühjahrskongress der Gesellschaft für Arbeitswissenschaft eV. Dortmund: GfA-Press; 2017.' conference: end_date: 2017-02-17 location: Brugg-Windisch name: 'Soziotechnische Gestaltung des digitalen Wandels - Kreativ, Innovativ, Sinnhaft ' start_date: 2017-02-15 corporate_editor: - Gesellschaft für Arbeitswissenschaft e.V (GfA) date_created: 2018-11-26T15:07:37Z date_updated: 2023-03-15T13:49:42Z ddc: - '620' department: - _id: DEP7020 - _id: DEP1305 issue: '30' language: - iso: ger place: Dortmund publication: Bericht zum 63. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V. publication_identifier: isbn: - 978-3-936804-22-5 publication_status: published publisher: GfA-Press status: public title: Auswirkungen von Assistenzsystemen auf die Arbeit in der manuellen Montage type: conference user_id: '49010' year: 2017 ... --- _id: '4789' author: - first_name: Andreas full_name: Bunte, Andreas id: '58885' last_name: Bunte - first_name: Peng full_name: Li, Peng id: '58937' last_name: Li - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann citation: ama: 'Bunte A, Li P, Niggemann O. Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems. In: 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS). ; 2017.' apa: 'Bunte, A., Li, P., & Niggemann, O. (2017). Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems. In 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS).' bjps: 'Bunte A, Li P and Niggemann O (2017) Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems. 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS).' chicago: 'Bunte, Andreas, Peng Li, and Oliver Niggemann. “Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems.” In 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS), 2017.' chicago-de: 'Bunte, Andreas, Peng Li und Oliver Niggemann. 2017. Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems. In: 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS).' din1505-2-1: 'Bunte, Andreas ; Li, Peng ; Niggemann, Oliver: Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems. In: 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS), 2017' havard: 'A. Bunte, P. Li, O. Niggemann, Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems, in: 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS), 2017.' ieee: 'A. Bunte, P. Li, and O. Niggemann, “Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems,” in 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS), 2017.' mla: 'Bunte, Andreas, et al. “Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems.” 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS), 2017.' short: 'A. Bunte, P. Li, O. Niggemann, in: 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS), 2017.' ufg: 'Bunte, Andreas et. al. (2017): Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems, in: 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS).' van: 'Bunte A, Li P, Niggemann O. Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems. In: 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 40 (ML4CPS). 2017.' date_created: 2021-02-02T08:24:27Z date_updated: 2023-03-15T13:49:55Z department: - _id: DEP5023 language: - iso: eng publication: 3rd Conference on Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS) status: public title: 'Learned Abstraction: Knowledge Based Concept Learning for Cyber Physical Systems' type: conference user_id: '68554' year: 2017 ... --- _id: '4782' abstract: - lang: ger text: "Die zunehmende Individualisierung von Produkten stellt neue Anforderun-\r\ngen an Produktionsanlagen, wodurch deren Komplexit¨at steigt. Damit komplexe An-\r\nlagen effizient bedient werden k¨onnen, vor allem im Fall eines Fehlers, sind neue Inter-\r\naktionskonzepte erforderlich. In dieser Arbeit wurde ein Konzept f¨ur die Sprachverar-\r\nbeitung entworfen und prototypisch implementiert. Zus¨atzlich zur Sprachverarbeitung\r\nist eine semantische Schicht notwendig um eine Steuerung ¨uber Sprache zu realisieren" author: - first_name: Andreas full_name: Bunte, Andreas id: '58885' last_name: Bunte - first_name: Alexander full_name: Diedrich, Alexander last_name: Diedrich - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann citation: ama: 'Bunte A, Diedrich A, Niggemann O. Natürlichsprachliche Schnittstelle für Produktionssysteme. In: Tagungsband Des Entwicklerforums “HMI – Komponenten Lösungen.” München: HMI; 2016.' apa: 'Bunte, A., Diedrich, A., & Niggemann, O. (2016). Natürlichsprachliche Schnittstelle für Produktionssysteme. In Tagungsband des Entwicklerforums “HMI – Komponenten Lösungen.” München: HMI.' bjps: 'Bunte A, Diedrich A and Niggemann O (2016) Natürlichsprachliche Schnittstelle Für Produktionssysteme. Tagungsband Des Entwicklerforums ‘HMI – Komponenten Lösungen’. München: HMI.' chicago: 'Bunte, Andreas, Alexander Diedrich, and Oliver Niggemann. “Natürlichsprachliche Schnittstelle Für Produktionssysteme.” In Tagungsband Des Entwicklerforums “HMI – Komponenten Lösungen.” München: HMI, 2016.' chicago-de: 'Bunte, Andreas, Alexander Diedrich und Oliver Niggemann. 2016. Natürlichsprachliche Schnittstelle für Produktionssysteme. In: Tagungsband des Entwicklerforums „HMI – Komponenten Lösungen“. München: HMI.' din1505-2-1: 'Bunte, Andreas ; Diedrich, Alexander ; Niggemann, Oliver: Natürlichsprachliche Schnittstelle für Produktionssysteme. In: Tagungsband des Entwicklerforums „HMI – Komponenten Lösungen“. München : HMI, 2016' havard: 'A. Bunte, A. Diedrich, O. Niggemann, Natürlichsprachliche Schnittstelle für Produktionssysteme, in: Tagungsband Des Entwicklerforums “HMI – Komponenten Lösungen,” HMI, München, 2016.' ieee: A. Bunte, A. Diedrich, and O. Niggemann, “Natürlichsprachliche Schnittstelle für Produktionssysteme,” in Tagungsband des Entwicklerforums “HMI – Komponenten Lösungen,” 2016. mla: Bunte, Andreas, et al. “Natürlichsprachliche Schnittstelle Für Produktionssysteme.” Tagungsband Des Entwicklerforums “HMI – Komponenten Lösungen,” HMI, 2016. short: 'A. Bunte, A. Diedrich, O. Niggemann, in: Tagungsband Des Entwicklerforums “HMI – Komponenten Lösungen,” HMI, München, 2016.' ufg: 'Bunte, Andreas et. al. (2016): Natürlichsprachliche Schnittstelle für Produktionssysteme, in: Tagungsband des Entwicklerforums „HMI – Komponenten Lösungen“, München.' van: 'Bunte A, Diedrich A, Niggemann O. Natürlichsprachliche Schnittstelle für Produktionssysteme. In: Tagungsband des Entwicklerforums “HMI – Komponenten Lösungen.” München: HMI; 2016.' date_created: 2021-02-02T08:11:42Z date_updated: 2023-03-15T13:49:55Z department: - _id: DEP5023 language: - iso: eng main_file_link: - url: https://www.researchgate.net/publication/304525199_Naturlichsprachliche_Schnittstelle_fur_Produktionssysteme place: München publication: Tagungsband des Entwicklerforums "HMI – Komponenten Lösungen" publisher: HMI status: public title: Natürlichsprachliche Schnittstelle für Produktionssysteme type: conference user_id: '68554' year: 2016 ... --- _id: '4790' author: - first_name: Andreas full_name: Bunte, Andreas id: '58885' last_name: Bunte - first_name: Alexander full_name: Diedrich, Alexander last_name: Diedrich - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann citation: ama: 'Bunte A, Diedrich A, Niggemann O. Semantics Enable Standardized User Interfaces for Diagnosis in Modular Production Systems. In: International Workshop on the Principles of Diagnosis (DX). Denver, CO, USA; 2016.' apa: Bunte, A., Diedrich, A., & Niggemann, O. (2016). Semantics Enable Standardized User Interfaces for Diagnosis in Modular Production Systems. In International Workshop on the Principles of Diagnosis (DX). Denver, CO, USA. bjps: Bunte A, Diedrich A and Niggemann O (2016) Semantics Enable Standardized User Interfaces for Diagnosis in Modular Production Systems. International Workshop on the Principles of Diagnosis (DX). Denver, CO, USA. chicago: Bunte, Andreas, Alexander Diedrich, and Oliver Niggemann. “Semantics Enable Standardized User Interfaces for Diagnosis in Modular Production Systems.” In International Workshop on the Principles of Diagnosis (DX). Denver, CO, USA, 2016. chicago-de: 'Bunte, Andreas, Alexander Diedrich und Oliver Niggemann. 2016. Semantics Enable Standardized User Interfaces for Diagnosis in Modular Production Systems. In: International Workshop on the Principles of Diagnosis (DX). Denver, CO, USA.' din1505-2-1: 'Bunte, Andreas ; Diedrich, Alexander ; Niggemann, Oliver: Semantics Enable Standardized User Interfaces for Diagnosis in Modular Production Systems. In: International Workshop on the Principles of Diagnosis (DX). Denver, CO, USA, 2016' havard: 'A. Bunte, A. Diedrich, O. Niggemann, Semantics Enable Standardized User Interfaces for Diagnosis in Modular Production Systems, in: International Workshop on the Principles of Diagnosis (DX), Denver, CO, USA, 2016.' ieee: A. Bunte, A. Diedrich, and O. Niggemann, “Semantics Enable Standardized User Interfaces for Diagnosis in Modular Production Systems,” in International Workshop on the Principles of Diagnosis (DX), 2016. mla: Bunte, Andreas, et al. “Semantics Enable Standardized User Interfaces for Diagnosis in Modular Production Systems.” International Workshop on the Principles of Diagnosis (DX), 2016. short: 'A. Bunte, A. Diedrich, O. Niggemann, in: International Workshop on the Principles of Diagnosis (DX), Denver, CO, USA, 2016.' ufg: 'Bunte, Andreas et. al. (2016): Semantics Enable Standardized User Interfaces for Diagnosis in Modular Production Systems, in: International Workshop on the Principles of Diagnosis (DX), Denver, CO, USA.' van: 'Bunte A, Diedrich A, Niggemann O. Semantics Enable Standardized User Interfaces for Diagnosis in Modular Production Systems. In: International Workshop on the Principles of Diagnosis (DX). Denver, CO, USA; 2016.' date_created: 2021-02-02T08:25:27Z date_updated: 2023-03-15T13:49:55Z department: - _id: DEP5023 language: - iso: eng place: Denver, CO, USA publication: International Workshop on the Principles of Diagnosis (DX) status: public title: Semantics Enable Standardized User Interfaces for Diagnosis in Modular Production Systems type: conference user_id: '68554' year: 2016 ... --- _id: '4791' author: - first_name: Andreas full_name: Bunte, Andreas id: '58885' last_name: Bunte - first_name: Alexander full_name: Diedrich, Alexander last_name: Diedrich - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann citation: ama: 'Bunte A, Diedrich A, Niggemann O. Integrating Semantics for Diagnosis of Manufacturing Systems. In: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Berlin; 2016.' apa: Bunte, A., Diedrich, A., & Niggemann, O. (2016). Integrating Semantics for Diagnosis of Manufacturing Systems. In 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Berlin. bjps: Bunte A, Diedrich A and Niggemann O (2016) Integrating Semantics for Diagnosis of Manufacturing Systems. 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Berlin. chicago: Bunte, Andreas, Alexander Diedrich, and Oliver Niggemann. “Integrating Semantics for Diagnosis of Manufacturing Systems.” In 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Berlin, 2016. chicago-de: 'Bunte, Andreas, Alexander Diedrich und Oliver Niggemann. 2016. Integrating Semantics for Diagnosis of Manufacturing Systems. In: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Berlin.' din1505-2-1: 'Bunte, Andreas ; Diedrich, Alexander ; Niggemann, Oliver: Integrating Semantics for Diagnosis of Manufacturing Systems. In: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Berlin, 2016' havard: 'A. Bunte, A. Diedrich, O. Niggemann, Integrating Semantics for Diagnosis of Manufacturing Systems, in: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Berlin, 2016.' ieee: A. Bunte, A. Diedrich, and O. Niggemann, “Integrating Semantics for Diagnosis of Manufacturing Systems,” in 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2016. mla: Bunte, Andreas, et al. “Integrating Semantics for Diagnosis of Manufacturing Systems.” 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2016. short: 'A. Bunte, A. Diedrich, O. Niggemann, in: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Berlin, 2016.' ufg: 'Bunte, Andreas et. al. (2016): Integrating Semantics for Diagnosis of Manufacturing Systems, in: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Berlin.' van: 'Bunte A, Diedrich A, Niggemann O. Integrating Semantics for Diagnosis of Manufacturing Systems. In: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Berlin; 2016.' date_created: 2021-02-02T08:26:21Z date_updated: 2023-03-15T13:49:55Z department: - _id: DEP5023 language: - iso: eng place: Berlin publication: 21th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) status: public title: Integrating Semantics for Diagnosis of Manufacturing Systems type: conference user_id: '68554' year: 2016 ... --- _id: '4792' author: - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Gautam full_name: Biswas, Gautam last_name: Biswas - first_name: Hamed full_name: Khorasgani, Hamed last_name: Khorasgani - first_name: Sören full_name: Volgmann, Sören last_name: Volgmann - first_name: Andreas full_name: Bunte, Andreas id: '58885' last_name: Bunte citation: ama: 'Niggemann O, Biswas G, Khorasgani H, Volgmann S, Bunte A. Datenanalyse in der intelligenten Fabrik. In: Vogel-Hauser B, Bauernhansl T, ten Hompel M, eds. Handbuch Industrie 4.0 Bd. 2. Berlin, Heidelberg: Springer Berlin Heidelberg; 2016.' apa: 'Niggemann, O., Biswas, G., Khorasgani, H., Volgmann, S., & Bunte, A. (2016). Datenanalyse in der intelligenten Fabrik. In B. Vogel-Hauser, T. Bauernhansl, & M. ten Hompel (Eds.), Handbuch Industrie 4.0 Bd. 2. Berlin, Heidelberg: Springer Berlin Heidelberg.' bjps: 'Niggemann O et al. (2016) Datenanalyse in Der Intelligenten Fabrik. In Vogel-Hauser B, Bauernhansl T and ten Hompel M (eds), Handbuch Industrie 4.0 Bd. 2. Berlin, Heidelberg: Springer Berlin Heidelberg.' chicago: 'Niggemann, Oliver, Gautam Biswas, Hamed Khorasgani, Sören Volgmann, and Andreas Bunte. “Datenanalyse in Der Intelligenten Fabrik.” In Handbuch Industrie 4.0 Bd. 2, edited by Birgit Vogel-Hauser, Thomas Bauernhansl, and Michael ten Hompel. Berlin, Heidelberg: Springer Berlin Heidelberg, 2016.' chicago-de: 'Niggemann, Oliver, Gautam Biswas, Hamed Khorasgani, Sören Volgmann und Andreas Bunte. 2016. Datenanalyse in der intelligenten Fabrik. In: Handbuch Industrie 4.0 Bd. 2, hg. von Birgit Vogel-Hauser, Thomas Bauernhansl, und Michael ten Hompel. Berlin, Heidelberg: Springer Berlin Heidelberg.' din1505-2-1: 'Niggemann, Oliver ; Biswas, Gautam ; Khorasgani, Hamed ; Volgmann, Sören ; Bunte, Andreas: Datenanalyse in der intelligenten Fabrik. In: Vogel-Hauser, B. ; Bauernhansl, T. ; ten Hompel, M. (Hrsg.): Handbuch Industrie 4.0 Bd. 2. Berlin, Heidelberg : Springer Berlin Heidelberg, 2016' havard: 'O. Niggemann, G. Biswas, H. Khorasgani, S. Volgmann, A. Bunte, Datenanalyse in der intelligenten Fabrik, in: B. Vogel-Hauser, T. Bauernhansl, M. ten Hompel (Eds.), Handbuch Industrie 4.0 Bd. 2, Springer Berlin Heidelberg, Berlin, Heidelberg, 2016.' ieee: 'O. Niggemann, G. Biswas, H. Khorasgani, S. Volgmann, and A. Bunte, “Datenanalyse in der intelligenten Fabrik,” in Handbuch Industrie 4.0 Bd. 2, B. Vogel-Hauser, T. Bauernhansl, and M. ten Hompel, Eds. Berlin, Heidelberg: Springer Berlin Heidelberg, 2016.' mla: Niggemann, Oliver, et al. “Datenanalyse in Der Intelligenten Fabrik.” Handbuch Industrie 4.0 Bd. 2, edited by Birgit Vogel-Hauser et al., Springer Berlin Heidelberg, 2016. short: 'O. Niggemann, G. Biswas, H. Khorasgani, S. Volgmann, A. Bunte, in: B. Vogel-Hauser, T. Bauernhansl, M. ten Hompel (Eds.), Handbuch Industrie 4.0 Bd. 2, Springer Berlin Heidelberg, Berlin, Heidelberg, 2016.' ufg: 'Niggemann, Oliver et. al. (2016): Datenanalyse in der intelligenten Fabrik, in: Birgit Vogel-Hauser et. al. (Hgg.): Handbuch Industrie 4.0 Bd. 2, Berlin, Heidelberg.' van: 'Niggemann O, Biswas G, Khorasgani H, Volgmann S, Bunte A. Datenanalyse in der intelligenten Fabrik. In: Vogel-Hauser B, Bauernhansl T, ten Hompel M, editors. Handbuch Industrie 40 Bd 2. Berlin, Heidelberg: Springer Berlin Heidelberg; 2016.' date_created: 2021-02-02T08:28:14Z date_updated: 2023-03-15T13:49:55Z department: - _id: DEP5023 editor: - first_name: Birgit full_name: Vogel-Hauser, Birgit last_name: Vogel-Hauser - first_name: Thomas full_name: Bauernhansl, Thomas last_name: Bauernhansl - first_name: Michael full_name: ten Hompel, Michael last_name: ten Hompel language: - iso: eng main_file_link: - url: https://link.springer.com/chapter/10.1007/978-3-662-53248-5_73 place: Berlin, Heidelberg publication: Handbuch Industrie 4.0 Bd. 2 publisher: Springer Berlin Heidelberg status: public title: Datenanalyse in der intelligenten Fabrik type: book_chapter user_id: '68554' year: 2016 ... --- _id: '4863' author: - first_name: Jürgen full_name: Jasperneite, Jürgen id: '1899' last_name: Jasperneite - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann citation: ama: 'Jasperneite J, Niggemann O. Wie intelligent werden Maschinen? In: Vortrag anlässlich des 50 jährigen Bestehens der Lemgoer Elektrotechnik. Lemgo; 2016.' apa: Jasperneite, J., & Niggemann, O. (2016). Wie intelligent werden Maschinen? In Vortrag anlässlich des 50 jährigen Bestehens der Lemgoer Elektrotechnik. Lemgo. bjps: Jasperneite J and Niggemann O (2016) Wie intelligent werden Maschinen? Vortrag anlässlich des 50 jährigen Bestehens der Lemgoer Elektrotechnik. Lemgo. chicago: Jasperneite, Jürgen, and Oliver Niggemann. “Wie intelligent werden Maschinen?” In Vortrag anlässlich des 50 jährigen Bestehens der Lemgoer Elektrotechnik. Lemgo, 2016. chicago-de: 'Jasperneite, Jürgen und Oliver Niggemann. 2016. Wie intelligent werden Maschinen? In: Vortrag anlässlich des 50 jährigen Bestehens der Lemgoer Elektrotechnik. Lemgo.' din1505-2-1: 'Jasperneite, Jürgen ; Niggemann, Oliver: Wie intelligent werden Maschinen? In: Vortrag anlässlich des 50 jährigen Bestehens der Lemgoer Elektrotechnik. Lemgo, 2016' havard: 'J. Jasperneite, O. Niggemann, Wie intelligent werden Maschinen?, in: Vortrag anlässlich des 50 jährigen Bestehens der Lemgoer Elektrotechnik, Lemgo, 2016.' ieee: J. Jasperneite and O. Niggemann, “Wie intelligent werden Maschinen?,” in Vortrag anlässlich des 50 jährigen Bestehens der Lemgoer Elektrotechnik, 2016. mla: Jasperneite, Jürgen, and Oliver Niggemann. “Wie intelligent werden Maschinen?” Vortrag anlässlich des 50 jährigen Bestehens der Lemgoer Elektrotechnik, 2016. short: 'J. Jasperneite, O. Niggemann, in: Vortrag anlässlich des 50 jährigen Bestehens der Lemgoer Elektrotechnik, Lemgo, 2016.' ufg: 'Jasperneite, Jürgen/Niggemann, Oliver (2016): Wie intelligent werden Maschinen?, in: Vortrag anlässlich des 50 jährigen Bestehens der Lemgoer Elektrotechnik, Lemgo.' van: 'Jasperneite J, Niggemann O. Wie intelligent werden Maschinen? In: Vortrag anlässlich des 50 jährigen Bestehens der Lemgoer Elektrotechnik. Lemgo; 2016.' date_created: 2021-02-02T13:35:25Z date_updated: 2023-03-15T13:49:56Z department: - _id: DEP5023 language: - iso: ger place: Lemgo publication: Vortrag anlässlich des 50 jährigen Bestehens der Lemgoer Elektrotechnik status: public title: Wie intelligent werden Maschinen? type: conference user_id: '68554' year: 2016 ... --- _id: '428' abstract: - lang: ger text: Der Trend einer zunehmenden Produkt- und Variantenvielfalt macht es notwendig, Betriebsmittel so zu planen, dass diese möglichst für ein breites Produktspektrum einsetzbar oder einfach auf neue Produkte oder Produktvarianten umzurüsten sind. Hierdurch entsteht in vielen Branchen der Bedarf nach wandlungsfähigen Fertigungssystemen. Wandlungsfähigkeit oder Rekonfiguration bedeutet, ein Fertigungssystem mit einfachen Mitteln umbauen zu können, um die Systemfunktionen an veränderte oder neue Anforderungen strukturell anzupassen. Diese Anpassungen sollten möglichst ohne Experten erfolgen können. Dazu kann das an die Computertechnik angelehnte Prinzip des „Plug and Produce“ vorteilhaft genutzt werden. In diesem Beitrag wird dieses Prinzip an zwei Fertigungssystemen der Smart Factory OWL, einer gemeinsamen Initiative der Fraunhofer-Gesellschaft und der Hochschule Ostwestfalen-Lippe in Lemgo, erläutert. article_type: original author: - first_name: Jürgen full_name: Jasperneite, Jürgen id: '1899' last_name: Jasperneite - first_name: Sven full_name: Hinrichsen, Sven id: '49010' last_name: Hinrichsen - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann citation: ama: Jasperneite J, Hinrichsen S, Niggemann O. ,,Plug-and-Produce“ für Fertigungssysteme - Anwendungsfälle und Lösungsansätze. Informatik-Spektrum. 2015;38(3):183-190. apa: Jasperneite, J., Hinrichsen, S., & Niggemann, O. (2015). ,,Plug-and-Produce“ für Fertigungssysteme - Anwendungsfälle und Lösungsansätze. Informatik-Spektrum, 38(3), 183–190. bjps: Jasperneite J, Hinrichsen S and Niggemann O (2015) ,,Plug-and-Produce“ für Fertigungssysteme - Anwendungsfälle und Lösungsansätze. Informatik-Spektrum 38, 183–190. chicago: 'Jasperneite, Jürgen, Sven Hinrichsen, and Oliver Niggemann. “,,Plug-and-Produce“ für Fertigungssysteme - Anwendungsfälle und Lösungsansätze.” Informatik-Spektrum 38, no. 3 (2015): 183–90.' chicago-de: 'Jasperneite, Jürgen, Sven Hinrichsen und Oliver Niggemann. 2015. ,,Plug-and-Produce“ für Fertigungssysteme - Anwendungsfälle und Lösungsansätze. Informatik-Spektrum 38, Nr. 3: 183–190.' din1505-2-1: 'Jasperneite, Jürgen ; Hinrichsen, Sven ; Niggemann, Oliver: ,,Plug-and-Produce“ für Fertigungssysteme - Anwendungsfälle und Lösungsansätze. In: Informatik-Spektrum Bd. 38, Springer-Verlag GmbH (2015), Nr. 3, S. 183–190' havard: J. Jasperneite, S. Hinrichsen, O. Niggemann, ,,Plug-and-Produce“ für Fertigungssysteme - Anwendungsfälle und Lösungsansätze, Informatik-Spektrum. 38 (2015) 183–190. ieee: J. Jasperneite, S. Hinrichsen, and O. Niggemann, “,,Plug-and-Produce“ für Fertigungssysteme - Anwendungsfälle und Lösungsansätze,” Informatik-Spektrum, vol. 38, no. 3, pp. 183–190, 2015. mla: Jasperneite, Jürgen, et al. “,,Plug-and-Produce“ für Fertigungssysteme - Anwendungsfälle und Lösungsansätze.” Informatik-Spektrum, vol. 38, no. 3, Springer-Verlag GmbH, 2015, pp. 183–90. short: J. Jasperneite, S. Hinrichsen, O. Niggemann, Informatik-Spektrum 38 (2015) 183–190. ufg: 'Jasperneite, Jürgen et. al. (2015): ,,Plug-and-Produce“ für Fertigungssysteme - Anwendungsfälle und Lösungsansätze, in: Informatik-Spektrum 38 (3), S. 183–190.' van: Jasperneite J, Hinrichsen S, Niggemann O. ,,Plug-and-Produce“ für Fertigungssysteme - Anwendungsfälle und Lösungsansätze. Informatik-Spektrum. 2015;38(3):183–90. date_created: 2019-01-16T15:44:47Z date_updated: 2023-03-15T13:49:51Z department: - _id: DEP1305 intvolume: ' 38' issue: '3' language: - iso: ger main_file_link: - url: https://link.springer.com/content/pdf/10.1007%2Fs00287-015-0877-x.pdf page: 183-190 publication: Informatik-Spektrum publication_identifier: issn: - 0170-6012 publication_status: published publisher: Springer-Verlag GmbH status: public title: ',,Plug-and-Produce“ für Fertigungssysteme - Anwendungsfälle und Lösungsansätze' type: journal_article user_id: '45673' volume: 38 year: 2015 ... --- _id: '2167' abstract: - lang: eng text: "Cyber-Physical Production Systems (CPPSs) are in the focus of research, industry and politics: By applying new IT and new computer science solutions, production systems will become more adaptable, more resource ef- ficient and more user friendly. The analysis and diagnosis of such systems is a major part of this trend: Plants should detect automatically wear, faults and suboptimal configurations. This paper reflects the current state-of- the-art in diagnosis against the requirements of CPPSs, identifies three main gaps and gives application scenarios to outline first ideas for potential solutions to close these gaps.\r\n" author: - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Volker full_name: Lohweg, Volker id: '1804' last_name: Lohweg orcid: 0000-0002-3325-7887 citation: ama: 'Niggemann O, Lohweg V. On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda. In: Twenty-Ninth Conference on Artificial Intelligence (AAAI-15). Austin, Texas, USA; 2015.' apa: Niggemann, O., & Lohweg, V. (2015). On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda. In Twenty-Ninth Conference on Artificial Intelligence (AAAI-15). Austin, Texas, USA. bjps: Niggemann O and Lohweg V (2015) On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda. Twenty-Ninth Conference on Artificial Intelligence (AAAI-15). Austin, Texas, USA. chicago: Niggemann, Oliver, and Volker Lohweg. “On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda.” In Twenty-Ninth Conference on Artificial Intelligence (AAAI-15). Austin, Texas, USA, 2015. chicago-de: 'Niggemann, Oliver und Volker Lohweg. 2015. On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda. In: Twenty-Ninth Conference on Artificial Intelligence (AAAI-15). Austin, Texas, USA.' din1505-2-1: 'Niggemann, Oliver ; Lohweg, Volker: On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda. In: Twenty-Ninth Conference on Artificial Intelligence (AAAI-15). Austin, Texas, USA, 2015' havard: 'O. Niggemann, V. Lohweg, On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda, in: Twenty-Ninth Conference on Artificial Intelligence (AAAI-15), Austin, Texas, USA, 2015.' ieee: O. Niggemann and V. Lohweg, “On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda,” in Twenty-Ninth Conference on Artificial Intelligence (AAAI-15), 2015. mla: Niggemann, Oliver, and Volker Lohweg. “On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda.” Twenty-Ninth Conference on Artificial Intelligence (AAAI-15), 2015. short: 'O. Niggemann, V. Lohweg, in: Twenty-Ninth Conference on Artificial Intelligence (AAAI-15), Austin, Texas, USA, 2015.' ufg: 'Niggemann, Oliver/Lohweg, Volker (2015): On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda, in: Twenty-Ninth Conference on Artificial Intelligence (AAAI-15), Austin, Texas, USA.' van: 'Niggemann O, Lohweg V. On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda. In: Twenty-Ninth Conference on Artificial Intelligence (AAAI-15). Austin, Texas, USA; 2015.' date_created: 2019-12-04T12:43:12Z date_updated: 2023-03-15T13:49:39Z department: - _id: DEP5023 keyword: - Cyber-Physical Systems - Machine Learning - Diagnosis - Anomaly Detection language: - iso: eng main_file_link: - open_access: '1' url: https://www.aaai.org/ocs/index.php/AAAI/AAAI15/paper/view/9530/9691 oa: '1' place: Austin, Texas, USA publication: Twenty-Ninth Conference on Artificial Intelligence (AAAI-15) status: public title: On the Diagnosis of Cyber-Physical Production Systems - State-of-the-Art and Research Agenda type: conference user_id: '68554' year: 2015 ... --- _id: '4793' author: - first_name: Alexander full_name: Diedrich, Alexander last_name: Diedrich - first_name: Andreas full_name: Bunte, Andreas id: '58885' last_name: Bunte - first_name: Alexander full_name: Maier, Alexander id: '11158' last_name: Maier - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann citation: ama: 'Diedrich A, Bunte A, Maier A, Niggemann O. Kognitive Architektur zum Konzeptlernen in technischen Systemen. In: Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS). Lemgo, Germany; 2015.' apa: Diedrich, A., Bunte, A., Maier, A., & Niggemann, O. (2015). Kognitive Architektur zum Konzeptlernen in technischen Systemen. In Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS). Lemgo, Germany. bjps: Diedrich A et al. (2015) Kognitive Architektur Zum Konzeptlernen in Technischen Systemen. Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS). Lemgo, Germany. chicago: Diedrich, Alexander, Andreas Bunte, Alexander Maier, and Oliver Niggemann. “Kognitive Architektur Zum Konzeptlernen in Technischen Systemen.” In Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS). Lemgo, Germany, 2015. chicago-de: 'Diedrich, Alexander, Andreas Bunte, Alexander Maier und Oliver Niggemann. 2015. Kognitive Architektur zum Konzeptlernen in technischen Systemen. In: Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS). Lemgo, Germany.' din1505-2-1: 'Diedrich, Alexander ; Bunte, Andreas ; Maier, Alexander ; Niggemann, Oliver: Kognitive Architektur zum Konzeptlernen in technischen Systemen. In: Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS). Lemgo, Germany, 2015' havard: 'A. Diedrich, A. Bunte, A. Maier, O. Niggemann, Kognitive Architektur zum Konzeptlernen in technischen Systemen, in: Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS), Lemgo, Germany, 2015.' ieee: A. Diedrich, A. Bunte, A. Maier, and O. Niggemann, “Kognitive Architektur zum Konzeptlernen in technischen Systemen,” in Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS), 2015. mla: Diedrich, Alexander, et al. “Kognitive Architektur Zum Konzeptlernen in Technischen Systemen.” Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS), 2015. short: 'A. Diedrich, A. Bunte, A. Maier, O. Niggemann, in: Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS), Lemgo, Germany, 2015.' ufg: 'Diedrich, Alexander et. al. (2015): Kognitive Architektur zum Konzeptlernen in technischen Systemen, in: Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS), Lemgo, Germany.' van: 'Diedrich A, Bunte A, Maier A, Niggemann O. Kognitive Architektur zum Konzeptlernen in technischen Systemen. In: Machine Learning for Cyber Physical Systems and Industry 40 (ML4CPS). Lemgo, Germany; 2015.' date_created: 2021-02-02T08:36:53Z date_updated: 2023-03-15T13:49:55Z department: - _id: DEP5023 language: - iso: eng place: Lemgo, Germany publication: Machine Learning for Cyber Physical Systems and Industry 4.0 (ML4CPS) status: public title: Kognitive Architektur zum Konzeptlernen in technischen Systemen type: conference user_id: '68554' year: 2015 ... --- _id: '4794' author: - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Gautam full_name: Biswas, Gautam last_name: Biswas - first_name: John S. full_name: Kinnebrew, John S. last_name: Kinnebrew - first_name: Hamed full_name: Khorasgani, Hamed last_name: Khorasgani - first_name: Sören full_name: Volgmann, Sören last_name: Volgmann - first_name: Andreas full_name: Bunte, Andreas id: '58885' last_name: Bunte citation: ama: 'Niggemann O, Biswas G, Kinnebrew JS, Khorasgani H, Volgmann S, Bunte A. Data-Driven Monitoring of Cyber-Physical Systems Leveraging on Big Data and the Internet-of-Things for Diagnosis and Control. In: International Workshop on the Principles of Diagnosis (DX). Paris, France; 2015.' apa: Niggemann, O., Biswas, G., Kinnebrew, J. S., Khorasgani, H., Volgmann, S., & Bunte, A. (2015). Data-Driven Monitoring of Cyber-Physical Systems Leveraging on Big Data and the Internet-of-Things for Diagnosis and Control. In International Workshop on the Principles of Diagnosis (DX). Paris, France. bjps: Niggemann O et al. (2015) Data-Driven Monitoring of Cyber-Physical Systems Leveraging on Big Data and the Internet-of-Things for Diagnosis and Control. International Workshop on the Principles of Diagnosis (DX). Paris, France. chicago: Niggemann, Oliver, Gautam Biswas, John S. Kinnebrew, Hamed Khorasgani, Sören Volgmann, and Andreas Bunte. “Data-Driven Monitoring of Cyber-Physical Systems Leveraging on Big Data and the Internet-of-Things for Diagnosis and Control.” In International Workshop on the Principles of Diagnosis (DX). Paris, France, 2015. chicago-de: 'Niggemann, Oliver, Gautam Biswas, John S. Kinnebrew, Hamed Khorasgani, Sören Volgmann und Andreas Bunte. 2015. Data-Driven Monitoring of Cyber-Physical Systems Leveraging on Big Data and the Internet-of-Things for Diagnosis and Control. In: International Workshop on the Principles of Diagnosis (DX). Paris, France.' din1505-2-1: 'Niggemann, Oliver ; Biswas, Gautam ; Kinnebrew, John S. ; Khorasgani, Hamed ; Volgmann, Sören ; Bunte, Andreas: Data-Driven Monitoring of Cyber-Physical Systems Leveraging on Big Data and the Internet-of-Things for Diagnosis and Control. In: International Workshop on the Principles of Diagnosis (DX). Paris, France, 2015' havard: 'O. Niggemann, G. Biswas, J.S. Kinnebrew, H. Khorasgani, S. Volgmann, A. Bunte, Data-Driven Monitoring of Cyber-Physical Systems Leveraging on Big Data and the Internet-of-Things for Diagnosis and Control, in: International Workshop on the Principles of Diagnosis (DX), Paris, France, 2015.' ieee: O. Niggemann, G. Biswas, J. S. Kinnebrew, H. Khorasgani, S. Volgmann, and A. Bunte, “Data-Driven Monitoring of Cyber-Physical Systems Leveraging on Big Data and the Internet-of-Things for Diagnosis and Control,” in International Workshop on the Principles of Diagnosis (DX), 2015. mla: Niggemann, Oliver, et al. “Data-Driven Monitoring of Cyber-Physical Systems Leveraging on Big Data and the Internet-of-Things for Diagnosis and Control.” International Workshop on the Principles of Diagnosis (DX), 2015. short: 'O. Niggemann, G. Biswas, J.S. Kinnebrew, H. Khorasgani, S. Volgmann, A. Bunte, in: International Workshop on the Principles of Diagnosis (DX), Paris, France, 2015.' ufg: 'Niggemann, Oliver et. al. (2015): Data-Driven Monitoring of Cyber-Physical Systems Leveraging on Big Data and the Internet-of-Things for Diagnosis and Control, in: International Workshop on the Principles of Diagnosis (DX), Paris, France.' van: 'Niggemann O, Biswas G, Kinnebrew JS, Khorasgani H, Volgmann S, Bunte A. Data-Driven Monitoring of Cyber-Physical Systems Leveraging on Big Data and the Internet-of-Things for Diagnosis and Control. In: International Workshop on the Principles of Diagnosis (DX). Paris, France; 2015.' date_created: 2021-02-02T08:37:49Z date_updated: 2023-03-15T13:49:55Z department: - _id: DEP5023 language: - iso: eng place: Paris, France publication: International Workshop on the Principles of Diagnosis (DX) status: public title: Data-Driven Monitoring of Cyber-Physical Systems Leveraging on Big Data and the Internet-of-Things for Diagnosis and Control type: conference user_id: '68554' year: 2015 ... --- _id: '4802' author: - first_name: Björn full_name: Böttcher, Björn last_name: Böttcher - first_name: Natalia full_name: Moriz, Natalia id: '44238' last_name: Moriz - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann citation: ama: 'Böttcher B, Moriz N, Niggemann O. Intelligente Entwurfsassistenz für Automatisierungssysteme - Vorteile deklarativer Paradigmen im Systementwurf. In: Automation 2015. Baden-Baden: VDI-Verlag; 2015.' apa: 'Böttcher, B., Moriz, N., & Niggemann, O. (2015). Intelligente Entwurfsassistenz für Automatisierungssysteme - Vorteile deklarativer Paradigmen im Systementwurf. In Automation 2015. Baden-Baden: VDI-Verlag.' bjps: 'Böttcher B, Moriz N and Niggemann O (2015) Intelligente Entwurfsassistenz für Automatisierungssysteme - Vorteile deklarativer Paradigmen im Systementwurf. Automation 2015. Baden-Baden: VDI-Verlag.' chicago: 'Böttcher, Björn, Natalia Moriz, and Oliver Niggemann. “Intelligente Entwurfsassistenz für Automatisierungssysteme - Vorteile deklarativer Paradigmen im Systementwurf.” In Automation 2015. Baden-Baden: VDI-Verlag, 2015.' chicago-de: 'Böttcher, Björn, Natalia Moriz und Oliver Niggemann. 2015. Intelligente Entwurfsassistenz für Automatisierungssysteme - Vorteile deklarativer Paradigmen im Systementwurf. In: Automation 2015. Baden-Baden: VDI-Verlag.' din1505-2-1: 'Böttcher, Björn ; Moriz, Natalia ; Niggemann, Oliver: Intelligente Entwurfsassistenz für Automatisierungssysteme - Vorteile deklarativer Paradigmen im Systementwurf. In: Automation 2015. Baden-Baden : VDI-Verlag, 2015' havard: 'B. Böttcher, N. Moriz, O. Niggemann, Intelligente Entwurfsassistenz für Automatisierungssysteme - Vorteile deklarativer Paradigmen im Systementwurf, in: Automation 2015, VDI-Verlag, Baden-Baden, 2015.' ieee: B. Böttcher, N. Moriz, and O. Niggemann, “Intelligente Entwurfsassistenz für Automatisierungssysteme - Vorteile deklarativer Paradigmen im Systementwurf,” in Automation 2015, 2015. mla: Böttcher, Björn, et al. “Intelligente Entwurfsassistenz für Automatisierungssysteme - Vorteile deklarativer Paradigmen im Systementwurf.” Automation 2015, VDI-Verlag, 2015. short: 'B. Böttcher, N. Moriz, O. Niggemann, in: Automation 2015, VDI-Verlag, Baden-Baden, 2015.' ufg: 'Böttcher, Björn et. al. (2015): Intelligente Entwurfsassistenz für Automatisierungssysteme - Vorteile deklarativer Paradigmen im Systementwurf, in: Automation 2015, Baden-Baden.' van: 'Böttcher B, Moriz N, Niggemann O. Intelligente Entwurfsassistenz für Automatisierungssysteme - Vorteile deklarativer Paradigmen im Systementwurf. In: Automation 2015. Baden-Baden: VDI-Verlag; 2015.' date_created: 2021-02-02T09:08:09Z date_updated: 2023-03-15T13:49:55Z department: - _id: DEP5023 language: - iso: ger place: Baden-Baden publication: Automation 2015 publisher: VDI-Verlag status: public title: Intelligente Entwurfsassistenz für Automatisierungssysteme - Vorteile deklarativer Paradigmen im Systementwurf type: conference user_id: '68554' year: 2015 ... --- _id: '4552' author: - first_name: Christian full_name: Frey, Christian last_name: Frey - first_name: Michael full_name: Heinzmann, Michael last_name: Heinzmann - first_name: Jürgen full_name: Jasperneite, Jürgen id: '1899' last_name: Jasperneite - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Olaf full_name: Sauer, Olaf last_name: Sauer - first_name: Miriam full_name: Schleipen, Miriam last_name: Schleipen - first_name: Thomas full_name: Usländer, Thomas last_name: Usländer - first_name: Michael full_name: Voit, Michael last_name: Voit citation: ama: Frey C, Heinzmann M, Jasperneite J, et al. IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0. ATP edition - Automatisierungstechnische Praxis. 2014. apa: Frey, C., Heinzmann, M., Jasperneite, J., Niggemann, O., Sauer, O., Schleipen, M., … Voit, M. (2014). IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0. ATP Edition - Automatisierungstechnische Praxis. bjps: Frey C et al. (2014) IKT in Der Fabrik Der Zukunft - Ein Diskussionsbeitrag Zu Industrie 4.0. ATP edition - Automatisierungstechnische Praxis. chicago: Frey, Christian, Michael Heinzmann, Jürgen Jasperneite, Oliver Niggemann, Olaf Sauer, Miriam Schleipen, Thomas Usländer, and Michael Voit. “IKT in Der Fabrik Der Zukunft - Ein Diskussionsbeitrag Zu Industrie 4.0.” ATP Edition - Automatisierungstechnische Praxis, 2014. chicago-de: Frey, Christian, Michael Heinzmann, Jürgen Jasperneite, Oliver Niggemann, Olaf Sauer, Miriam Schleipen, Thomas Usländer und Michael Voit. 2014. IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0. ATP edition - Automatisierungstechnische Praxis. din1505-2-1: 'Frey, Christian ; Heinzmann, Michael ; Jasperneite, Jürgen ; Niggemann, Oliver ; Sauer, Olaf ; Schleipen, Miriam ; Usländer, Thomas ; Voit, Michael: IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0. In: ATP edition - Automatisierungstechnische Praxis (2014)' havard: C. Frey, M. Heinzmann, J. Jasperneite, O. Niggemann, O. Sauer, M. Schleipen, T. Usländer, M. Voit, IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0, ATP Edition - Automatisierungstechnische Praxis. (2014). ieee: C. Frey et al., “IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0,” ATP edition - Automatisierungstechnische Praxis, 2014. mla: Frey, Christian, et al. “IKT in Der Fabrik Der Zukunft - Ein Diskussionsbeitrag Zu Industrie 4.0.” ATP Edition - Automatisierungstechnische Praxis, 2014. short: C. Frey, M. Heinzmann, J. Jasperneite, O. Niggemann, O. Sauer, M. Schleipen, T. Usländer, M. Voit, ATP Edition - Automatisierungstechnische Praxis (2014). ufg: 'Frey, Christian et. al. (2014): IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0, in: ATP edition - Automatisierungstechnische Praxis.' van: Frey C, Heinzmann M, Jasperneite J, Niggemann O, Sauer O, Schleipen M, et al. IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0. ATP edition - Automatisierungstechnische Praxis. 2014; date_created: 2021-01-26T14:27:39Z date_updated: 2023-03-15T13:49:53Z department: - _id: DEP5023 - _id: DEP5019 language: - iso: eng publication: ATP edition - Automatisierungstechnische Praxis status: public title: IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0 type: journal_article user_id: '45673' year: 2014 ... --- _id: '4556' author: - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Jürgen full_name: Jasperneite, Jürgen id: '1899' last_name: Jasperneite citation: ama: 'Niggemann O, Jasperneite J. Konzepte und Anwendungsfälle für die intelligente Fabrik. In: Bauernhansl T, ten Hompel M, Vogel-Heuser B, eds. Industrie 4.0 in Produktion, Automatisierung Und Logistik . Springer-Verlag; 2014.' apa: Niggemann, O., & Jasperneite, J. (2014). Konzepte und Anwendungsfälle für die intelligente Fabrik. In T. Bauernhansl, M. ten Hompel, & B. Vogel-Heuser (Eds.), Industrie 4.0 in Produktion, Automatisierung und Logistik . Springer-Verlag. bjps: Niggemann O and Jasperneite J (2014) Konzepte Und Anwendungsfälle Für Die Intelligente Fabrik. In Bauernhansl T, ten Hompel M and Vogel-Heuser B (eds), Industrie 4.0 in Produktion, Automatisierung Und Logistik . Springer-Verlag. chicago: Niggemann, Oliver, and Jürgen Jasperneite. “Konzepte Und Anwendungsfälle Für Die Intelligente Fabrik.” In Industrie 4.0 in Produktion, Automatisierung Und Logistik , edited by Thomas Bauernhansl, Michael ten Hompel, and Birgit Vogel-Heuser. Springer-Verlag, 2014. chicago-de: 'Niggemann, Oliver und Jürgen Jasperneite. 2014. Konzepte und Anwendungsfälle für die intelligente Fabrik. In: Industrie 4.0 in Produktion, Automatisierung und Logistik , hg. von Thomas Bauernhansl, Michael ten Hompel, und Birgit Vogel-Heuser. Springer-Verlag.' din1505-2-1: 'Niggemann, Oliver ; Jasperneite, Jürgen: Konzepte und Anwendungsfälle für die intelligente Fabrik. In: Bauernhansl, T. ; ten Hompel, M. ; Vogel-Heuser, B. (Hrsg.): Industrie 4.0 in Produktion, Automatisierung und Logistik  : Springer-Verlag, 2014' havard: 'O. Niggemann, J. Jasperneite, Konzepte und Anwendungsfälle für die intelligente Fabrik, in: T. Bauernhansl, M. ten Hompel, B. Vogel-Heuser (Eds.), Industrie 4.0 in Produktion, Automatisierung Und Logistik , Springer-Verlag, 2014.' ieee: O. Niggemann and J. Jasperneite, “Konzepte und Anwendungsfälle für die intelligente Fabrik,” in Industrie 4.0 in Produktion, Automatisierung und Logistik , T. Bauernhansl, M. ten Hompel, and B. Vogel-Heuser, Eds. Springer-Verlag, 2014. mla: Niggemann, Oliver, and Jürgen Jasperneite. “Konzepte Und Anwendungsfälle Für Die Intelligente Fabrik.” Industrie 4.0 in Produktion, Automatisierung Und Logistik , edited by Thomas Bauernhansl et al., Springer-Verlag, 2014. short: 'O. Niggemann, J. Jasperneite, in: T. Bauernhansl, M. ten Hompel, B. Vogel-Heuser (Eds.), Industrie 4.0 in Produktion, Automatisierung Und Logistik , Springer-Verlag, 2014.' ufg: 'Niggemann, Oliver/Jasperneite, Jürgen (2014): Konzepte und Anwendungsfälle für die intelligente Fabrik, in: Thomas Bauernhansl et. al. (Hgg.): Industrie 4.0 in Produktion, Automatisierung und Logistik .' van: 'Niggemann O, Jasperneite J. Konzepte und Anwendungsfälle für die intelligente Fabrik. In: Bauernhansl T, ten Hompel M, Vogel-Heuser B, editors. Industrie 40 in Produktion, Automatisierung und Logistik . Springer-Verlag; 2014.' date_created: 2021-01-26T14:38:32Z date_updated: 2023-03-15T13:49:53Z department: - _id: DEP5023 - _id: DEP5019 editor: - first_name: Thomas full_name: Bauernhansl, Thomas last_name: Bauernhansl - first_name: Michael full_name: ten Hompel, Michael last_name: ten Hompel - first_name: Birgit full_name: Vogel-Heuser, Birgit last_name: Vogel-Heuser language: - iso: eng publication: 'Industrie 4.0 in Produktion, Automatisierung und Logistik ' publisher: Springer-Verlag status: public title: Konzepte und Anwendungsfälle für die intelligente Fabrik type: book_chapter user_id: '45673' year: 2014 ... --- _id: '4561' author: - first_name: Christian full_name: Frey, Christian last_name: Frey - first_name: Michael full_name: Heinzmann, Michael last_name: Heinzmann - first_name: Jürgen full_name: Jasperneite, Jürgen id: '1899' last_name: Jasperneite - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Olaf full_name: Sauer, Olaf last_name: Sauer - first_name: Miriam full_name: Schleipen, Miriam last_name: Schleipen - first_name: Thomas full_name: Usländer, Thomas last_name: Usländer citation: ama: Frey C, Heinzmann M, Jasperneite J, et al. IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0. ATP edition - Automatisierungstechnische Praxis. 2014. apa: Frey, C., Heinzmann, M., Jasperneite, J., Niggemann, O., Sauer, O., Schleipen, M., & Usländer, T. (2014). IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0. ATP Edition - Automatisierungstechnische Praxis. bjps: Frey C et al. (2014) IKT in Der Fabrik Der Zukunft - Ein Diskussionsbeitrag Zu Industrie 4.0. ATP edition - Automatisierungstechnische Praxis. chicago: Frey, Christian, Michael Heinzmann, Jürgen Jasperneite, Oliver Niggemann, Olaf Sauer, Miriam Schleipen, and Thomas Usländer. “IKT in Der Fabrik Der Zukunft - Ein Diskussionsbeitrag Zu Industrie 4.0.” ATP Edition - Automatisierungstechnische Praxis, 2014. chicago-de: Frey, Christian, Michael Heinzmann, Jürgen Jasperneite, Oliver Niggemann, Olaf Sauer, Miriam Schleipen und Thomas Usländer. 2014. IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0. ATP edition - Automatisierungstechnische Praxis. din1505-2-1: 'Frey, Christian ; Heinzmann, Michael ; Jasperneite, Jürgen ; Niggemann, Oliver ; Sauer, Olaf ; Schleipen, Miriam ; Usländer, Thomas: IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0. In: ATP edition - Automatisierungstechnische Praxis. München, DIV Vulkan Verlag (2014)' havard: C. Frey, M. Heinzmann, J. Jasperneite, O. Niggemann, O. Sauer, M. Schleipen, T. Usländer, IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0, ATP Edition - Automatisierungstechnische Praxis. (2014). ieee: C. Frey et al., “IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0,” ATP edition - Automatisierungstechnische Praxis, 2014. mla: Frey, Christian, et al. “IKT in Der Fabrik Der Zukunft - Ein Diskussionsbeitrag Zu Industrie 4.0.” ATP Edition - Automatisierungstechnische Praxis, DIV Vulkan Verlag, 2014. short: C. Frey, M. Heinzmann, J. Jasperneite, O. Niggemann, O. Sauer, M. Schleipen, T. Usländer, ATP Edition - Automatisierungstechnische Praxis (2014). ufg: 'Frey, Christian et. al. (2014): IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0, in: ATP edition - Automatisierungstechnische Praxis.' van: Frey C, Heinzmann M, Jasperneite J, Niggemann O, Sauer O, Schleipen M, et al. IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0. ATP edition - Automatisierungstechnische Praxis. 2014; date_created: 2021-01-26T14:48:11Z date_updated: 2023-03-15T13:49:53Z department: - _id: DEP5023 - _id: DEP5019 language: - iso: eng place: München publication: ATP edition - Automatisierungstechnische Praxis publisher: DIV Vulkan Verlag status: public title: IKT in der Fabrik der Zukunft - Ein Diskussionsbeitrag zu Industrie 4.0 type: journal_article user_id: '45673' year: 2014 ... --- _id: '4573' author: - first_name: Sebastian full_name: Schriegel, Sebastian last_name: Schriegel - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Jürgen full_name: Jasperneite, Jürgen id: '1899' last_name: Jasperneite citation: ama: 'Schriegel S, Niggemann O, Jasperneite J. Plug-and-Work für verteilte Echtzeitsysteme mit Zeitsynchronisation. In: ; 2014.' apa: Schriegel, S., Niggemann, O., & Jasperneite, J. (2014). Plug-and-Work für verteilte Echtzeitsysteme mit Zeitsynchronisation. Presented at the Echtzeit 2014 - Industrie 4.0 und Echtzeit GI/VDE/VDI Fachausschuss Echtzeitsysteme, Boppard. bjps: Schriegel S, Niggemann O and Jasperneite J (2014) Plug-and-Work Für Verteilte Echtzeitsysteme Mit Zeitsynchronisation. chicago: Schriegel, Sebastian, Oliver Niggemann, and Jürgen Jasperneite. “Plug-and-Work Für Verteilte Echtzeitsysteme Mit Zeitsynchronisation,” 2014. chicago-de: 'Schriegel, Sebastian, Oliver Niggemann und Jürgen Jasperneite. 2014. Plug-and-Work für verteilte Echtzeitsysteme mit Zeitsynchronisation. In: .' din1505-2-1: 'Schriegel, Sebastian ; Niggemann, Oliver ; Jasperneite, Jürgen: Plug-and-Work für verteilte Echtzeitsysteme mit Zeitsynchronisation. In: , 2014' havard: 'S. Schriegel, O. Niggemann, J. Jasperneite, Plug-and-Work für verteilte Echtzeitsysteme mit Zeitsynchronisation, in: 2014.' ieee: S. Schriegel, O. Niggemann, and J. Jasperneite, “Plug-and-Work für verteilte Echtzeitsysteme mit Zeitsynchronisation,” presented at the Echtzeit 2014 - Industrie 4.0 und Echtzeit GI/VDE/VDI Fachausschuss Echtzeitsysteme, Boppard, 2014. mla: Schriegel, Sebastian, et al. Plug-and-Work Für Verteilte Echtzeitsysteme Mit Zeitsynchronisation. 2014. short: 'S. Schriegel, O. Niggemann, J. Jasperneite, in: 2014.' ufg: 'Schriegel, Sebastian et. al. (2014): Plug-and-Work für verteilte Echtzeitsysteme mit Zeitsynchronisation, in: .' van: Schriegel S, Niggemann O, Jasperneite J. Plug-and-Work für verteilte Echtzeitsysteme mit Zeitsynchronisation. In 2014. conference: location: Boppard name: Echtzeit 2014 - Industrie 4.0 und Echtzeit GI/VDE/VDI Fachausschuss Echtzeitsysteme date_created: 2021-01-27T10:42:27Z date_updated: 2023-03-15T13:49:54Z department: - _id: DEP5023 - _id: DEP5019 language: - iso: eng status: public title: Plug-and-Work für verteilte Echtzeitsysteme mit Zeitsynchronisation type: conference user_id: '45673' year: 2014 ... --- _id: '4795' author: - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Stefan full_name: Windmann, Stefan id: '58525' last_name: Windmann - first_name: Sören full_name: Volgmann, Sören last_name: Volgmann - first_name: Andreas full_name: Bunte, Andreas id: '58885' last_name: Bunte - first_name: Benno full_name: Stein, Benno last_name: Stein citation: ama: 'Niggemann O, Windmann S, Volgmann S, Bunte A, Stein B. Using Learned Models for the Root Cause Analysis of Cyber-Physical Production Systems. In: International Workshop on the Principles of Diagnosis (DX). Graz, Austria; 2014.' apa: Niggemann, O., Windmann, S., Volgmann, S., Bunte, A., & Stein, B. (2014). Using Learned Models for the Root Cause Analysis of Cyber-Physical Production Systems. In International Workshop on the Principles of Diagnosis (DX). Graz, Austria. bjps: Niggemann O et al. (2014) Using Learned Models for the Root Cause Analysis of Cyber-Physical Production Systems. International Workshop on the Principles of Diagnosis (DX). Graz, Austria. chicago: Niggemann, Oliver, Stefan Windmann, Sören Volgmann, Andreas Bunte, and Benno Stein. “Using Learned Models for the Root Cause Analysis of Cyber-Physical Production Systems.” In International Workshop on the Principles of Diagnosis (DX). Graz, Austria, 2014. chicago-de: 'Niggemann, Oliver, Stefan Windmann, Sören Volgmann, Andreas Bunte und Benno Stein. 2014. Using Learned Models for the Root Cause Analysis of Cyber-Physical Production Systems. In: International Workshop on the Principles of Diagnosis (DX). Graz, Austria.' din1505-2-1: 'Niggemann, Oliver ; Windmann, Stefan ; Volgmann, Sören ; Bunte, Andreas ; Stein, Benno: Using Learned Models for the Root Cause Analysis of Cyber-Physical Production Systems. In: International Workshop on the Principles of Diagnosis (DX) : Graz, Austria, 2014' havard: 'O. Niggemann, S. Windmann, S. Volgmann, A. Bunte, B. Stein, Using Learned Models for the Root Cause Analysis of Cyber-Physical Production Systems, in: International Workshop on the Principles of Diagnosis (DX), Graz, Austria, 2014.' ieee: O. Niggemann, S. Windmann, S. Volgmann, A. Bunte, and B. Stein, “Using Learned Models for the Root Cause Analysis of Cyber-Physical Production Systems,” in International Workshop on the Principles of Diagnosis (DX), 2014. mla: Niggemann, Oliver, et al. “Using Learned Models for the Root Cause Analysis of Cyber-Physical Production Systems.” International Workshop on the Principles of Diagnosis (DX), Graz, Austria, 2014. short: 'O. Niggemann, S. Windmann, S. Volgmann, A. Bunte, B. Stein, in: International Workshop on the Principles of Diagnosis (DX), Graz, Austria, 2014.' ufg: 'Niggemann, Oliver et. al. (2014): Using Learned Models for the Root Cause Analysis of Cyber-Physical Production Systems, in: International Workshop on the Principles of Diagnosis (DX).' van: 'Niggemann O, Windmann S, Volgmann S, Bunte A, Stein B. Using Learned Models for the Root Cause Analysis of Cyber-Physical Production Systems. In: International Workshop on the Principles of Diagnosis (DX). Graz, Austria; 2014.' date_created: 2021-02-02T08:38:54Z date_updated: 2023-03-15T13:49:55Z department: - _id: DEP5023 language: - iso: eng publication: International Workshop on the Principles of Diagnosis (DX) publisher: Graz, Austria status: public title: Using Learned Models for the Root Cause Analysis of Cyber-Physical Production Systems type: conference user_id: '68554' year: 2014 ... --- _id: '4803' author: - first_name: Natalia full_name: Moriz, Natalia id: '44238' last_name: Moriz - first_name: Björn full_name: Böttcher, Björn last_name: Böttcher - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Josef full_name: Lackhove, Josef last_name: Lackhove citation: ama: 'Moriz N, Böttcher B, Niggemann O, Lackhove J. Assisted Design for Automation Systems - from Formal Requirements to Final Designs. In: 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Barcelona, Spain; 2014.' apa: Moriz, N., Böttcher, B., Niggemann, O., & Lackhove, J. (2014). Assisted Design for Automation Systems - from Formal Requirements to Final Designs. In 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Barcelona, Spain. bjps: Moriz N et al. (2014) Assisted Design for Automation Systems - from Formal Requirements to Final Designs. 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Barcelona, Spain. chicago: Moriz, Natalia, Björn Böttcher, Oliver Niggemann, and Josef Lackhove. “Assisted Design for Automation Systems - from Formal Requirements to Final Designs.” In 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Barcelona, Spain, 2014. chicago-de: 'Moriz, Natalia, Björn Böttcher, Oliver Niggemann und Josef Lackhove. 2014. Assisted Design for Automation Systems - from Formal Requirements to Final Designs. In: 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Barcelona, Spain.' din1505-2-1: 'Moriz, Natalia ; Böttcher, Björn ; Niggemann, Oliver ; Lackhove, Josef: Assisted Design for Automation Systems - from Formal Requirements to Final Designs. In: 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Barcelona, Spain, 2014' havard: 'N. Moriz, B. Böttcher, O. Niggemann, J. Lackhove, Assisted Design for Automation Systems - from Formal Requirements to Final Designs, in: 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Barcelona, Spain, 2014.' ieee: N. Moriz, B. Böttcher, O. Niggemann, and J. Lackhove, “Assisted Design for Automation Systems - from Formal Requirements to Final Designs,” in 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2014. mla: Moriz, Natalia, et al. “Assisted Design for Automation Systems - from Formal Requirements to Final Designs.” 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2014. short: 'N. Moriz, B. Böttcher, O. Niggemann, J. Lackhove, in: 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Barcelona, Spain, 2014.' ufg: 'Moriz, Natalia et. al. (2014): Assisted Design for Automation Systems - from Formal Requirements to Final Designs, in: 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Barcelona, Spain.' van: 'Moriz N, Böttcher B, Niggemann O, Lackhove J. Assisted Design for Automation Systems - from Formal Requirements to Final Designs. In: 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Barcelona, Spain; 2014.' date_created: 2021-02-02T09:09:47Z date_updated: 2023-03-15T13:49:55Z department: - _id: DEP5023 language: - iso: eng place: Barcelona, Spain publication: 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) status: public title: Assisted Design for Automation Systems - from Formal Requirements to Final Designs type: conference user_id: '68554' year: 2014 ... --- _id: '4804' author: - first_name: Björn full_name: Böttcher, Björn last_name: Böttcher - first_name: Natalia full_name: Moriz, Natalia id: '44238' last_name: Moriz - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann citation: ama: 'Böttcher B, Moriz N, Niggemann O. From Formal Requirements on Technical Systems to Complete Designs - A Holistic Approach. In: Schaub, T., Friedrich, G. O’Sullivan B, ed. 21st European Conference on Artificial Intelligence Frontiers in Artificial Intelligence and Applications, 2014. Prague, Czech Republic: Vol. 263; 2014:977-978.' apa: 'Böttcher, B., Moriz, N., & Niggemann, O. (2014). From Formal Requirements on Technical Systems to Complete Designs - A Holistic Approach. In B. Schaub, T., Friedrich, G. O’Sullivan (Ed.), 21st European Conference on Artificial Intelligence Frontiers in Artificial Intelligence and Applications, 2014 (pp. 977–978). Prague, Czech Republic: Vol. 263.' bjps: 'Böttcher B, Moriz N and Niggemann O (2014) From Formal Requirements on Technical Systems to Complete Designs - A Holistic Approach. In Schaub, T., Friedrich, G. O’Sullivan B (ed.), 21st European Conference on Artificial Intelligence Frontiers in Artificial Intelligence and Applications, 2014. Prague, Czech Republic: Vol. 263, pp. 977–978.' chicago: 'Böttcher, Björn, Natalia Moriz, and Oliver Niggemann. “From Formal Requirements on Technical Systems to Complete Designs - A Holistic Approach.” In 21st European Conference on Artificial Intelligence Frontiers in Artificial Intelligence and Applications, 2014, edited by B. Schaub, T., Friedrich, G. O’Sullivan, 977–78. Prague, Czech Republic: Vol. 263, 2014.' chicago-de: 'Böttcher, Björn, Natalia Moriz und Oliver Niggemann. 2014. From Formal Requirements on Technical Systems to Complete Designs - A Holistic Approach. In: 21st European Conference on Artificial Intelligence Frontiers in Artificial Intelligence and Applications, 2014, hg. von B. Schaub, T., Friedrich, G. O’Sullivan, 977–978. Prague, Czech Republic: Vol. 263.' din1505-2-1: 'Böttcher, Björn ; Moriz, Natalia ; Niggemann, Oliver: From Formal Requirements on Technical Systems to Complete Designs - A Holistic Approach. In: Schaub, T., Friedrich, G. O’Sullivan, B. (Hrsg.): 21st European Conference on Artificial Intelligence Frontiers in Artificial Intelligence and Applications, 2014. Prague, Czech Republic : Vol. 263, 2014, S. 977–978' havard: 'B. Böttcher, N. Moriz, O. Niggemann, From Formal Requirements on Technical Systems to Complete Designs - A Holistic Approach, in: B. Schaub, T., Friedrich, G. O’Sullivan (Ed.), 21st European Conference on Artificial Intelligence Frontiers in Artificial Intelligence and Applications, 2014, Vol. 263, Prague, Czech Republic, 2014: pp. 977–978.' ieee: B. Böttcher, N. Moriz, and O. Niggemann, “From Formal Requirements on Technical Systems to Complete Designs - A Holistic Approach,” in 21st European Conference on Artificial Intelligence Frontiers in Artificial Intelligence and Applications, 2014, 2014, pp. 977–978. mla: Böttcher, Björn, et al. “From Formal Requirements on Technical Systems to Complete Designs - A Holistic Approach.” 21st European Conference on Artificial Intelligence Frontiers in Artificial Intelligence and Applications, 2014, edited by B. Schaub, T., Friedrich, G. O’Sullivan, Vol. 263, 2014, pp. 977–78. short: 'B. Böttcher, N. Moriz, O. Niggemann, in: B. Schaub, T., Friedrich, G. O’Sullivan (Ed.), 21st European Conference on Artificial Intelligence Frontiers in Artificial Intelligence and Applications, 2014, Vol. 263, Prague, Czech Republic, 2014, pp. 977–978.' ufg: 'Böttcher, Björn et. al. (2014): From Formal Requirements on Technical Systems to Complete Designs - A Holistic Approach, in: B. Schaub, T., Friedrich, G. O’Sullivan (Hg.): 21st European Conference on Artificial Intelligence Frontiers in Artificial Intelligence and Applications, 2014, Prague, Czech Republic, S. 977–978.' van: 'Böttcher B, Moriz N, Niggemann O. From Formal Requirements on Technical Systems to Complete Designs - A Holistic Approach. In: Schaub, T., Friedrich, G. O’Sullivan B, editor. 21st European Conference on Artificial Intelligence Frontiers in Artificial Intelligence and Applications, 2014. Prague, Czech Republic: Vol. 263; 2014. p. 977–8.' date_created: 2021-02-02T09:10:58Z date_updated: 2023-03-15T13:49:55Z department: - _id: DEP5023 editor: - first_name: B. full_name: Schaub, T., Friedrich, G. O'Sullivan, B. last_name: Schaub, T., Friedrich, G. O'Sullivan language: - iso: eng page: pp. 977-978 place: Prague, Czech Republic publication: 21st European Conference on Artificial Intelligence Frontiers in Artificial Intelligence and Applications, 2014 publisher: Vol. 263 status: public title: From Formal Requirements on Technical Systems to Complete Designs - A Holistic Approach type: conference user_id: '68554' year: 2014 ... --- _id: '4199' author: - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Holger full_name: Borcherding, Holger id: '1693' last_name: Borcherding - first_name: Markus full_name: Köster, Markus last_name: Köster - first_name: Stefan full_name: Windmann, Stefan id: '58525' last_name: Windmann - first_name: Martin full_name: Ehlich, Martin last_name: Ehlich citation: ama: 'Niggemann O, Borcherding H, Köster M, Windmann S, Ehlich M. Energieeffizienz in der Intralogistik : Elektrische Antriebstechnik - intelligent und nachhaltig. Werkstattstechnik : wt. 2013;(5):416-422.' apa: 'Niggemann, O., Borcherding, H., Köster, M., Windmann, S., & Ehlich, M. (2013). Energieeffizienz in der Intralogistik : Elektrische Antriebstechnik - intelligent und nachhaltig. Werkstattstechnik : wt, (5), 416–422.' bjps: 'Niggemann O et al. (2013) Energieeffizienz in der Intralogistik : Elektrische Antriebstechnik - intelligent und nachhaltig. Werkstattstechnik : wt 416–422.' chicago: 'Niggemann, Oliver, Holger Borcherding, Markus Köster, Stefan Windmann, and Martin Ehlich. “Energieeffizienz in der Intralogistik : Elektrische Antriebstechnik - intelligent und nachhaltig.” Werkstattstechnik : wt, no. 5 (2013): 416–22.' chicago-de: 'Niggemann, Oliver, Holger Borcherding, Markus Köster, Stefan Windmann und Martin Ehlich. 2013. Energieeffizienz in der Intralogistik : Elektrische Antriebstechnik - intelligent und nachhaltig. Werkstattstechnik : wt, Nr. 5: 416–422.' din1505-2-1: 'Niggemann, Oliver ; Borcherding, Holger ; Köster, Markus ; Windmann, Stefan ; Ehlich, Martin: Energieeffizienz in der Intralogistik : Elektrische Antriebstechnik - intelligent und nachhaltig. In: Werkstattstechnik : wt. Berlin, Springer (2013), Nr. 5, S. 416–422' havard: 'O. Niggemann, H. Borcherding, M. Köster, S. Windmann, M. Ehlich, Energieeffizienz in der Intralogistik : Elektrische Antriebstechnik - intelligent und nachhaltig, Werkstattstechnik : wt. (2013) 416–422.' ieee: 'O. Niggemann, H. Borcherding, M. Köster, S. Windmann, and M. Ehlich, “Energieeffizienz in der Intralogistik : Elektrische Antriebstechnik - intelligent und nachhaltig,” Werkstattstechnik : wt, no. 5, pp. 416–422, 2013.' mla: 'Niggemann, Oliver, et al. “Energieeffizienz in der Intralogistik : Elektrische Antriebstechnik - intelligent und nachhaltig.” Werkstattstechnik : wt, no. 5, Springer, 2013, pp. 416–22.' short: 'O. Niggemann, H. Borcherding, M. Köster, S. Windmann, M. Ehlich, Werkstattstechnik : wt (2013) 416–422.' ufg: 'Niggemann, Oliver et. al. (2013): Energieeffizienz in der Intralogistik : Elektrische Antriebstechnik - intelligent und nachhaltig, in: Werkstattstechnik : wt (5), S. 416–422.' van: 'Niggemann O, Borcherding H, Köster M, Windmann S, Ehlich M. Energieeffizienz in der Intralogistik : Elektrische Antriebstechnik - intelligent und nachhaltig. Werkstattstechnik : wt. 2013;(5):416–22.' date_created: 2020-12-08T10:25:59Z date_updated: 2023-03-15T13:49:51Z ddc: - '004' department: - _id: DEP6020 file: - access_level: local content_type: application/pdf creator: czr-e2t date_created: 2020-12-08T10:27:46Z date_updated: 2020-12-08T10:27:46Z file_id: '4200' file_name: document.pdf file_size: 3009760 relation: main_file file_date_updated: 2020-12-08T10:27:46Z has_accepted_license: '1' issue: '5' language: - iso: ger page: 416 - 422 place: Berlin publication: 'Werkstattstechnik : wt' publication_identifier: issn: - 1436-4980 publication_status: published publisher: Springer status: public title: 'Energieeffizienz in der Intralogistik : Elektrische Antriebstechnik - intelligent und nachhaltig' type: journal_article user_id: '74004' year: 2013 ... --- _id: '4276' abstract: - lang: eng text: In the presented work, the detection of anomalous energy consumption in hybrid industrial production systems is investigated. A model-based approach with a timed hybrid automaton as overall system model is employed for anomaly detection. The approach is based on the assumption of several system modes, i.e. phases with continuous system behavior. Transitions between the modes are attributed to discrete control events such as on/off signals. The underlying discrete event system which comprises both system modes and transitions is modeled as finite state machine. The focus of this paper is set on the modeling of the energy consumption in the particular system modes. Sequences of stochastic state space models are employed for this purpose. Model learning and anomaly detection for this approach are considered. The proposed approach is further evaluated in a small model factory. The experimental results show significant improvements compared to existing approaches to anomaly detection in hybrid industrial systems. author: - first_name: Stefan full_name: Windmann, Stefan id: '58525' last_name: Windmann - first_name: Shuo full_name: Jiao, Shuo last_name: Jiao - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Holger full_name: Borcherding, Holger id: '1693' last_name: Borcherding citation: ama: 'Windmann S, Jiao S, Niggemann O, Borcherding H. A Stochastic Method for the Detection of Anomalous Energy Consumption in Hybrid Industrial Systems. In: 11th International IEEE Conference on Industrial Informatics. Bochum: IEEE; 2013:194-199.' apa: 'Windmann, S., Jiao, S., Niggemann, O., & Borcherding, H. (2013). A Stochastic Method for the Detection of Anomalous Energy Consumption in Hybrid Industrial Systems. In 11th International IEEE Conference on Industrial Informatics (pp. 194–199). Bochum: IEEE.' bjps: 'Windmann S et al. (2013) A Stochastic Method for the Detection of Anomalous Energy Consumption in Hybrid Industrial Systems. 11th International IEEE Conference on Industrial Informatics. Bochum: IEEE, pp. 194–199.' chicago: 'Windmann, Stefan, Shuo Jiao, Oliver Niggemann, and Holger Borcherding. “A Stochastic Method for the Detection of Anomalous Energy Consumption in Hybrid Industrial Systems.” In 11th International IEEE Conference on Industrial Informatics, 194–99. Bochum: IEEE, 2013.' chicago-de: 'Windmann, Stefan, Shuo Jiao, Oliver Niggemann und Holger Borcherding. 2013. A Stochastic Method for the Detection of Anomalous Energy Consumption in Hybrid Industrial Systems. In: 11th International IEEE Conference on Industrial Informatics, 194–199. Bochum: IEEE.' din1505-2-1: 'Windmann, Stefan ; Jiao, Shuo ; Niggemann, Oliver ; Borcherding, Holger: A Stochastic Method for the Detection of Anomalous Energy Consumption in Hybrid Industrial Systems. In: 11th International IEEE Conference on Industrial Informatics. Bochum : IEEE, 2013, S. 194–199' havard: 'S. Windmann, S. Jiao, O. Niggemann, H. Borcherding, A Stochastic Method for the Detection of Anomalous Energy Consumption in Hybrid Industrial Systems, in: 11th International IEEE Conference on Industrial Informatics, IEEE, Bochum, 2013: pp. 194–199.' ieee: S. Windmann, S. Jiao, O. Niggemann, and H. Borcherding, “A Stochastic Method for the Detection of Anomalous Energy Consumption in Hybrid Industrial Systems,” in 11th International IEEE Conference on Industrial Informatics, Bochum, 2013, pp. 194–199. mla: Windmann, Stefan, et al. “A Stochastic Method for the Detection of Anomalous Energy Consumption in Hybrid Industrial Systems.” 11th International IEEE Conference on Industrial Informatics, IEEE, 2013, pp. 194–99. short: 'S. Windmann, S. Jiao, O. Niggemann, H. Borcherding, in: 11th International IEEE Conference on Industrial Informatics, IEEE, Bochum, 2013, pp. 194–199.' ufg: 'Windmann, Stefan et. al. (2013): A Stochastic Method for the Detection of Anomalous Energy Consumption in Hybrid Industrial Systems, in: 11th International IEEE Conference on Industrial Informatics, Bochum, S. 194–199.' van: 'Windmann S, Jiao S, Niggemann O, Borcherding H. A Stochastic Method for the Detection of Anomalous Energy Consumption in Hybrid Industrial Systems. In: 11th International IEEE Conference on Industrial Informatics. Bochum: IEEE; 2013. p. 194–9.' conference: end_date: 2013-07-31 location: Bochum name: 11th International IEEE Conference on Industrial Informatics start_date: 20013-07-29 date_created: 2020-12-14T10:38:54Z date_updated: 2023-03-15T13:49:51Z department: - _id: DEP6020 - _id: DEP5018 language: - iso: eng page: 194 - 199 place: Bochum publication: 11th International IEEE Conference on Industrial Informatics publication_identifier: eisbn: - 978-1-4799-0752-6 publication_status: published publisher: IEEE status: public title: A Stochastic Method for the Detection of Anomalous Energy Consumption in Hybrid Industrial Systems type: conference user_id: '74004' year: 2013 ... --- _id: '4805' author: - first_name: Björn full_name: Böttcher, Björn last_name: Böttcher - first_name: Johann full_name: Badinger, Johann last_name: Badinger - first_name: Natalia full_name: Moriz, Natalia id: '44238' last_name: Moriz - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann citation: ama: 'Böttcher B, Badinger J, Moriz N, Niggemann O. Design of Industrial Automation Systems - Formal Requirements in the Engineering Process. In: 18thIEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy; 2013.' apa: Böttcher, B., Badinger, J., Moriz, N., & Niggemann, O. (2013). Design of Industrial Automation Systems - Formal Requirements in the Engineering Process. In 18thIEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy. bjps: Böttcher B et al. (2013) Design of Industrial Automation Systems - Formal Requirements in the Engineering Process. 18thIEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy. chicago: Böttcher, Björn, Johann Badinger, Natalia Moriz, and Oliver Niggemann. “Design of Industrial Automation Systems - Formal Requirements in the Engineering Process.” In 18thIEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy, 2013. chicago-de: 'Böttcher, Björn, Johann Badinger, Natalia Moriz und Oliver Niggemann. 2013. Design of Industrial Automation Systems - Formal Requirements in the Engineering Process. In: 18thIEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy.' din1505-2-1: 'Böttcher, Björn ; Badinger, Johann ; Moriz, Natalia ; Niggemann, Oliver: Design of Industrial Automation Systems - Formal Requirements in the Engineering Process. In: 18thIEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy, 2013' havard: 'B. Böttcher, J. Badinger, N. Moriz, O. Niggemann, Design of Industrial Automation Systems - Formal Requirements in the Engineering Process, in: 18thIEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Cagliari, Italy, 2013.' ieee: B. Böttcher, J. Badinger, N. Moriz, and O. Niggemann, “Design of Industrial Automation Systems - Formal Requirements in the Engineering Process,” in 18thIEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2013. mla: Böttcher, Björn, et al. “Design of Industrial Automation Systems - Formal Requirements in the Engineering Process.” 18thIEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2013. short: 'B. Böttcher, J. Badinger, N. Moriz, O. Niggemann, in: 18thIEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Cagliari, Italy, 2013.' ufg: 'Böttcher, Björn et. al. (2013): Design of Industrial Automation Systems - Formal Requirements in the Engineering Process, in: 18thIEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Cagliari, Italy.' van: 'Böttcher B, Badinger J, Moriz N, Niggemann O. Design of Industrial Automation Systems - Formal Requirements in the Engineering Process. In: 18thIEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Cagliari, Italy; 2013.' date_created: 2021-02-02T09:13:41Z date_updated: 2023-03-15T13:49:55Z department: - _id: DEP5023 language: - iso: eng place: Cagliari, Italy publication: 18thIEEE International Conference on Emerging Technologies and Factory Automation (ETFA) status: public title: Design of Industrial Automation Systems - Formal Requirements in the Engineering Process type: conference user_id: '68554' year: 2013 ... --- _id: '4806' author: - first_name: Nikolai full_name: Schetinin, Nikolai last_name: Schetinin - first_name: Natalia full_name: Moriz, Natalia id: '44238' last_name: Moriz - first_name: Barath full_name: Kumar, Barath last_name: Kumar - first_name: Sebastian full_name: Faltinski, Sebastian last_name: Faltinski - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Alexander full_name: Maier, Alexander id: '11158' last_name: Maier citation: ama: 'Schetinin N, Moriz N, Kumar B, Faltinski S, Niggemann O, Maier A. Why do verification approaches in automation rarely use HIL-test? In: International Conference on Industrial Technology (ICIT) 25.-27. February 2013, Cape Town, South Africa, . ; 2013.' apa: Schetinin, N., Moriz, N., Kumar, B., Faltinski, S., Niggemann, O., & Maier, A. (2013). Why do verification approaches in automation rarely use HIL-test? In International Conference on Industrial Technology (ICIT) 25.-27. February 2013, Cape Town, South Africa, . bjps: Schetinin N et al. (2013) Why Do Verification Approaches in Automation Rarely Use HIL-Test? International Conference on Industrial Technology (ICIT) 25.-27. February 2013, Cape Town, South Africa, . chicago: Schetinin, Nikolai, Natalia Moriz, Barath Kumar, Sebastian Faltinski, Oliver Niggemann, and Alexander Maier. “Why Do Verification Approaches in Automation Rarely Use HIL-Test?” In International Conference on Industrial Technology (ICIT) 25.-27. February 2013, Cape Town, South Africa, , 2013. chicago-de: 'Schetinin, Nikolai, Natalia Moriz, Barath Kumar, Sebastian Faltinski, Oliver Niggemann und Alexander Maier. 2013. Why do verification approaches in automation rarely use HIL-test? In: International Conference on Industrial Technology (ICIT) 25.-27. February 2013, Cape Town, South Africa, .' din1505-2-1: 'Schetinin, Nikolai ; Moriz, Natalia ; Kumar, Barath ; Faltinski, Sebastian ; Niggemann, Oliver ; Maier, Alexander: Why do verification approaches in automation rarely use HIL-test? In: International Conference on Industrial Technology (ICIT) 25.-27. February 2013, Cape Town, South Africa, , 2013' havard: 'N. Schetinin, N. Moriz, B. Kumar, S. Faltinski, O. Niggemann, A. Maier, Why do verification approaches in automation rarely use HIL-test?, in: International Conference on Industrial Technology (ICIT) 25.-27. February 2013, Cape Town, South Africa, , 2013.' ieee: N. Schetinin, N. Moriz, B. Kumar, S. Faltinski, O. Niggemann, and A. Maier, “Why do verification approaches in automation rarely use HIL-test?,” in International Conference on Industrial Technology (ICIT) 25.-27. February 2013, Cape Town, South Africa, , 2013. mla: Schetinin, Nikolai, et al. “Why Do Verification Approaches in Automation Rarely Use HIL-Test?” International Conference on Industrial Technology (ICIT) 25.-27. February 2013, Cape Town, South Africa, , 2013. short: 'N. Schetinin, N. Moriz, B. Kumar, S. Faltinski, O. Niggemann, A. Maier, in: International Conference on Industrial Technology (ICIT) 25.-27. February 2013, Cape Town, South Africa, , 2013.' ufg: 'Schetinin, Nikolai et. al. (2013): Why do verification approaches in automation rarely use HIL-test?, in: International Conference on Industrial Technology (ICIT) 25.-27. February 2013, Cape Town, South Africa, .' van: 'Schetinin N, Moriz N, Kumar B, Faltinski S, Niggemann O, Maier A. Why do verification approaches in automation rarely use HIL-test? In: International Conference on Industrial Technology (ICIT) 25-27 February 2013, Cape Town, South Africa, . 2013.' date_created: 2021-02-02T09:14:39Z date_updated: 2023-03-15T13:49:55Z department: - _id: DEP5023 language: - iso: eng publication: 'International Conference on Industrial Technology (ICIT) 25.-27. February 2013, Cape Town, South Africa, ' status: public title: Why do verification approaches in automation rarely use HIL-test? type: conference user_id: '68554' year: 2013 ... --- _id: '4527' author: - first_name: Barath full_name: Kumar, Barath last_name: Kumar - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Wilhelm full_name: Schäfer, Wilhelm last_name: Schäfer - first_name: Jürgen full_name: Jasperneite, Jürgen id: '1899' last_name: Jasperneite citation: ama: Kumar B, Niggemann O, Schäfer W, Jasperneite J. Modeling and Testing of Automation Systems. Advances in Intelligent and Soft Computing. 2012;133:1027-1034. apa: Kumar, B., Niggemann, O., Schäfer, W., & Jasperneite, J. (2012). Modeling and Testing of Automation Systems. Advances in Intelligent and Soft Computing, 133, 1027–1034. bjps: Kumar B et al. (2012) Modeling and Testing of Automation Systems. Advances in Intelligent and Soft Computing 133, 1027–1034. chicago: 'Kumar, Barath, Oliver Niggemann, Wilhelm Schäfer, and Jürgen Jasperneite. “Modeling and Testing of Automation Systems.” Advances in Intelligent and Soft Computing 133 (2012): 1027–34.' chicago-de: 'Kumar, Barath, Oliver Niggemann, Wilhelm Schäfer und Jürgen Jasperneite. 2012. Modeling and Testing of Automation Systems. Advances in Intelligent and Soft Computing 133: 1027–1034.' din1505-2-1: 'Kumar, Barath ; Niggemann, Oliver ; Schäfer, Wilhelm ; Jasperneite, Jürgen: Modeling and Testing of Automation Systems. In: Advances in Intelligent and Soft Computing Bd. 133 (2012), S. 1027–1034' havard: B. Kumar, O. Niggemann, W. Schäfer, J. Jasperneite, Modeling and Testing of Automation Systems, Advances in Intelligent and Soft Computing. 133 (2012) 1027–1034. ieee: B. Kumar, O. Niggemann, W. Schäfer, and J. Jasperneite, “Modeling and Testing of Automation Systems,” Advances in Intelligent and Soft Computing, vol. 133, pp. 1027–1034, 2012. mla: Kumar, Barath, et al. “Modeling and Testing of Automation Systems.” Advances in Intelligent and Soft Computing, vol. 133, 2012, pp. 1027–34. short: B. Kumar, O. Niggemann, W. Schäfer, J. Jasperneite, Advances in Intelligent and Soft Computing 133 (2012) 1027–1034. ufg: 'Kumar, Barath et. al. (2012): Modeling and Testing of Automation Systems, in: Advances in Intelligent and Soft Computing 133, S. 1027–1034.' van: Kumar B, Niggemann O, Schäfer W, Jasperneite J. Modeling and Testing of Automation Systems. Advances in Intelligent and Soft Computing. 2012;133:1027–34. date_created: 2021-01-26T12:51:48Z date_updated: 2023-03-15T13:49:53Z department: - _id: DEP5023 - _id: DEP5019 intvolume: ' 133' language: - iso: eng page: 1027-1034 publication: Advances in Intelligent and Soft Computing status: public title: Modeling and Testing of Automation Systems type: journal_article user_id: '45673' volume: 133 year: 2012 ... --- _id: '4535' author: - first_name: Jürgen full_name: Jasperneite, Jürgen id: '1899' last_name: Jasperneite - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann citation: ama: Jasperneite J, Niggemann O. Intelligente Assistenzsysteme zur Beherrschung der Systemkomplexität in der Automation. ATP edition - Automatisierungstechnische Praxis . 2012;(9). apa: Jasperneite, J., & Niggemann, O. (2012). Intelligente Assistenzsysteme zur Beherrschung der Systemkomplexität in der Automation. ATP Edition - Automatisierungstechnische Praxis , (9). bjps: Jasperneite J and Niggemann O (2012) Intelligente Assistenzsysteme Zur Beherrschung Der Systemkomplexität in Der Automation. ATP edition - Automatisierungstechnische Praxis . chicago: Jasperneite, Jürgen, and Oliver Niggemann. “Intelligente Assistenzsysteme Zur Beherrschung Der Systemkomplexität in Der Automation.” ATP Edition - Automatisierungstechnische Praxis , no. 9 (2012). chicago-de: Jasperneite, Jürgen und Oliver Niggemann. 2012. Intelligente Assistenzsysteme zur Beherrschung der Systemkomplexität in der Automation. ATP edition - Automatisierungstechnische Praxis , Nr. 9. din1505-2-1: 'Jasperneite, Jürgen ; Niggemann, Oliver: Intelligente Assistenzsysteme zur Beherrschung der Systemkomplexität in der Automation. In: ATP edition - Automatisierungstechnische Praxis . München, Oldenbourg Verlag (2012), Nr. 9' havard: J. Jasperneite, O. Niggemann, Intelligente Assistenzsysteme zur Beherrschung der Systemkomplexität in der Automation, ATP Edition - Automatisierungstechnische Praxis . (2012). ieee: J. Jasperneite and O. Niggemann, “Intelligente Assistenzsysteme zur Beherrschung der Systemkomplexität in der Automation,” ATP edition - Automatisierungstechnische Praxis , no. 9, 2012. mla: Jasperneite, Jürgen, and Oliver Niggemann. “Intelligente Assistenzsysteme Zur Beherrschung Der Systemkomplexität in Der Automation.” ATP Edition - Automatisierungstechnische Praxis , no. 9, Oldenbourg Verlag, 2012. short: J. Jasperneite, O. Niggemann, ATP Edition - Automatisierungstechnische Praxis (2012). ufg: 'Jasperneite, Jürgen/Niggemann, Oliver (2012): Intelligente Assistenzsysteme zur Beherrschung der Systemkomplexität in der Automation, in: ATP edition - Automatisierungstechnische Praxis (9).' van: Jasperneite J, Niggemann O. Intelligente Assistenzsysteme zur Beherrschung der Systemkomplexität in der Automation. ATP edition - Automatisierungstechnische Praxis . 2012;(9). date_created: 2021-01-26T13:15:38Z date_updated: 2023-03-15T13:49:53Z department: - _id: DEP5023 - _id: DEP5019 issue: '9' language: - iso: eng place: München publication: 'ATP edition - Automatisierungstechnische Praxis ' publisher: Oldenbourg Verlag status: public title: Intelligente Assistenzsysteme zur Beherrschung der Systemkomplexität in der Automation type: journal_article user_id: '45673' year: 2012 ... --- _id: '4540' author: - first_name: Barath full_name: Kumar, Barath last_name: Kumar - first_name: Andreas full_name: Toensfeuerborn, Andreas last_name: Toensfeuerborn - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Wilhelm full_name: Schäfer, Wilhelm last_name: Schäfer - first_name: Jürgen full_name: Jasperneite, Jürgen id: '1899' last_name: Jasperneite citation: ama: 'Kumar B, Toensfeuerborn A, Niggemann O, Schäfer W, Jasperneite J. Experience in deploying MBT for industrial automation. In: ; 2012.' apa: Kumar, B., Toensfeuerborn, A., Niggemann, O., Schäfer, W., & Jasperneite, J. (2012). Experience in deploying MBT for industrial automation. Presented at the ETSI Model Based Testing User Conference (MBTUC), Tallinn, Estonia. bjps: Kumar B et al. (2012) Experience in Deploying MBT for Industrial Automation. chicago: Kumar, Barath, Andreas Toensfeuerborn, Oliver Niggemann, Wilhelm Schäfer, and Jürgen Jasperneite. “Experience in Deploying MBT for Industrial Automation,” 2012. chicago-de: 'Kumar, Barath, Andreas Toensfeuerborn, Oliver Niggemann, Wilhelm Schäfer und Jürgen Jasperneite. 2012. Experience in deploying MBT for industrial automation. In: .' din1505-2-1: 'Kumar, Barath ; Toensfeuerborn, Andreas ; Niggemann, Oliver ; Schäfer, Wilhelm ; Jasperneite, Jürgen: Experience in deploying MBT for industrial automation. In: , 2012' havard: 'B. Kumar, A. Toensfeuerborn, O. Niggemann, W. Schäfer, J. Jasperneite, Experience in deploying MBT for industrial automation, in: 2012.' ieee: B. Kumar, A. Toensfeuerborn, O. Niggemann, W. Schäfer, and J. Jasperneite, “Experience in deploying MBT for industrial automation,” presented at the ETSI Model Based Testing User Conference (MBTUC), Tallinn, Estonia, 2012. mla: Kumar, Barath, et al. Experience in Deploying MBT for Industrial Automation. 2012. short: 'B. Kumar, A. Toensfeuerborn, O. Niggemann, W. Schäfer, J. Jasperneite, in: 2012.' ufg: 'Kumar, Barath et. al. (2012): Experience in deploying MBT for industrial automation, in: .' van: Kumar B, Toensfeuerborn A, Niggemann O, Schäfer W, Jasperneite J. Experience in deploying MBT for industrial automation. In 2012. conference: location: Tallinn, Estonia name: ETSI Model Based Testing User Conference (MBTUC) date_created: 2021-01-26T13:25:04Z date_updated: 2023-03-15T13:49:53Z department: - _id: DEP5023 - _id: DEP5019 language: - iso: eng status: public title: Experience in deploying MBT for industrial automation type: conference user_id: '45673' year: 2012 ... --- _id: '2105' author: - first_name: Alexander full_name: Dicks, Alexander id: '1853' last_name: Dicks - first_name: Martyna full_name: Bator, Martyna id: '46440' last_name: Bator - first_name: Volker full_name: Lohweg, Volker id: '1804' last_name: Lohweg orcid: 0000-0002-3325-7887 - first_name: Sebastian full_name: Faltinski, Sebastian last_name: Faltinski - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann citation: ama: 'Dicks A, Bator M, Lohweg V, Faltinski S, Niggemann O. Cyber-Physical Systems im Maschinen- und Anlagenbau – ein Konzept für die Zukunft? In: Cyber-Physical Systems – Enabling Multi-Nature Systems (CPMNS), Dresden, April 18, . Stuttgart: Fraunhofer-Verlag; 2012:51-56.' apa: 'Dicks, A., Bator, M., Lohweg, V., Faltinski, S., & Niggemann, O. (2012). Cyber-Physical Systems im Maschinen- und Anlagenbau – ein Konzept für die Zukunft? In Cyber-Physical Systems – Enabling Multi-Nature Systems (CPMNS), Dresden, April 18, (pp. 51–56). Stuttgart: Fraunhofer-Verlag.' bjps: 'Dicks A et al. (2012) Cyber-Physical Systems im Maschinen- und Anlagenbau – ein Konzept für die Zukunft? Cyber-Physical Systems – Enabling Multi-Nature Systems (CPMNS), Dresden, April 18, . Stuttgart: Fraunhofer-Verlag, pp. 51–56.' chicago: 'Dicks, Alexander, Martyna Bator, Volker Lohweg, Sebastian Faltinski, and Oliver Niggemann. “Cyber-Physical Systems im Maschinen- und Anlagenbau – ein Konzept für die Zukunft?” In Cyber-Physical Systems – Enabling Multi-Nature Systems (CPMNS), Dresden, April 18, , 51–56. Stuttgart: Fraunhofer-Verlag, 2012.' chicago-de: 'Dicks, Alexander, Martyna Bator, Volker Lohweg, Sebastian Faltinski und Oliver Niggemann. 2012. Cyber-Physical Systems im Maschinen- und Anlagenbau – ein Konzept für die Zukunft? In: Cyber-Physical Systems – Enabling Multi-Nature Systems (CPMNS), Dresden, April 18, , 51–56. Stuttgart: Fraunhofer-Verlag.' din1505-2-1: 'Dicks, Alexander ; Bator, Martyna ; Lohweg, Volker ; Faltinski, Sebastian ; Niggemann, Oliver: Cyber-Physical Systems im Maschinen- und Anlagenbau – ein Konzept für die Zukunft? In: Cyber-Physical Systems – Enabling Multi-Nature Systems (CPMNS), Dresden, April 18, . Stuttgart : Fraunhofer-Verlag, 2012, S. 51–56' havard: 'A. Dicks, M. Bator, V. Lohweg, S. Faltinski, O. Niggemann, Cyber-Physical Systems im Maschinen- und Anlagenbau – ein Konzept für die Zukunft?, in: Cyber-Physical Systems – Enabling Multi-Nature Systems (CPMNS), Dresden, April 18, , Fraunhofer-Verlag, Stuttgart, 2012: pp. 51–56.' ieee: A. Dicks, M. Bator, V. Lohweg, S. Faltinski, and O. Niggemann, “Cyber-Physical Systems im Maschinen- und Anlagenbau – ein Konzept für die Zukunft?,” in Cyber-Physical Systems – Enabling Multi-Nature Systems (CPMNS), Dresden, April 18, , 2012, pp. 51–56. mla: Dicks, Alexander, et al. “Cyber-Physical Systems im Maschinen- und Anlagenbau – ein Konzept für die Zukunft?” Cyber-Physical Systems – Enabling Multi-Nature Systems (CPMNS), Dresden, April 18, , Fraunhofer-Verlag, 2012, pp. 51–56. short: 'A. Dicks, M. Bator, V. Lohweg, S. Faltinski, O. Niggemann, in: Cyber-Physical Systems – Enabling Multi-Nature Systems (CPMNS), Dresden, April 18, , Fraunhofer-Verlag, Stuttgart, 2012, pp. 51–56.' ufg: 'Dicks, Alexander et. al. (2012): Cyber-Physical Systems im Maschinen- und Anlagenbau – ein Konzept für die Zukunft?, in: Cyber-Physical Systems – Enabling Multi-Nature Systems (CPMNS), Dresden, April 18, , Stuttgart, S. 51–56.' van: 'Dicks A, Bator M, Lohweg V, Faltinski S, Niggemann O. Cyber-Physical Systems im Maschinen- und Anlagenbau – ein Konzept für die Zukunft? In: Cyber-Physical Systems – Enabling Multi-Nature Systems (CPMNS), Dresden, April 18, . Stuttgart: Fraunhofer-Verlag; 2012. p. 51–6.' date_created: 2019-12-03T06:37:27Z date_updated: 2023-03-15T13:49:38Z ddc: - '620' department: - _id: DEP5023 file: - access_level: closed content_type: application/pdf creator: 6bl-f5s date_created: 2019-12-03T06:39:10Z date_updated: 2019-12-03T06:39:10Z file_id: '2106' file_name: lohweg_cyber.pdf file_size: 314865 relation: main_file file_date_updated: 2019-12-03T06:39:10Z has_accepted_license: '1' language: - iso: ger page: 51-56 place: Stuttgart publication: 'Cyber-Physical Systems – Enabling Multi-Nature Systems (CPMNS), Dresden, April 18, ' publication_identifier: isbn: - '978-3-8396-0398-7 ' publication_status: published publisher: Fraunhofer-Verlag status: public title: Cyber-Physical Systems im Maschinen- und Anlagenbau – ein Konzept für die Zukunft? type: conference user_id: '45673' year: 2012 ... --- _id: '4807' author: - first_name: Sebastian full_name: Faltinski, Sebastian last_name: Faltinski - first_name: Natalia full_name: Moriz, Natalia id: '44238' last_name: Moriz - first_name: Nikolai full_name: Schetinin, Nikolai last_name: Schetinin - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann citation: ama: 'Faltinski S, Moriz N, Schetinin N, Niggemann O. AutomationML als Grundlage für einen durchgängigen Modellierung-, Simulations- und Integrationsprozess in der Anlageplanung. . In: AUTOMATION 2012. Baden Baden; 2012.' apa: Faltinski, S., Moriz, N., Schetinin, N., & Niggemann, O. (2012). AutomationML als Grundlage für einen durchgängigen Modellierung-, Simulations- und Integrationsprozess in der Anlageplanung. . In AUTOMATION 2012. Baden Baden. bjps: Faltinski S et al. (2012) AutomationML Als Grundlage Für Einen Durchgängigen Modellierung-, Simulations- Und Integrationsprozess in Der Anlageplanung. . AUTOMATION 2012. Baden Baden. chicago: Faltinski, Sebastian, Natalia Moriz, Nikolai Schetinin, and Oliver Niggemann. “AutomationML Als Grundlage Für Einen Durchgängigen Modellierung-, Simulations- Und Integrationsprozess in Der Anlageplanung. .” In AUTOMATION 2012. Baden Baden, 2012. chicago-de: 'Faltinski, Sebastian, Natalia Moriz, Nikolai Schetinin und Oliver Niggemann. 2012. AutomationML als Grundlage für einen durchgängigen Modellierung-, Simulations- und Integrationsprozess in der Anlageplanung. . In: AUTOMATION 2012. Baden Baden.' din1505-2-1: 'Faltinski, Sebastian ; Moriz, Natalia ; Schetinin, Nikolai ; Niggemann, Oliver: AutomationML als Grundlage für einen durchgängigen Modellierung-, Simulations- und Integrationsprozess in der Anlageplanung. . In: AUTOMATION 2012. Baden Baden, 2012' havard: 'S. Faltinski, N. Moriz, N. Schetinin, O. Niggemann, AutomationML als Grundlage für einen durchgängigen Modellierung-, Simulations- und Integrationsprozess in der Anlageplanung. , in: AUTOMATION 2012, Baden Baden, 2012.' ieee: S. Faltinski, N. Moriz, N. Schetinin, and O. Niggemann, “AutomationML als Grundlage für einen durchgängigen Modellierung-, Simulations- und Integrationsprozess in der Anlageplanung. ,” in AUTOMATION 2012, 2012. mla: Faltinski, Sebastian, et al. “AutomationML Als Grundlage Für Einen Durchgängigen Modellierung-, Simulations- Und Integrationsprozess in Der Anlageplanung. .” AUTOMATION 2012, 2012. short: 'S. Faltinski, N. Moriz, N. Schetinin, O. Niggemann, in: AUTOMATION 2012, Baden Baden, 2012.' ufg: 'Faltinski, Sebastian et. al. (2012): AutomationML als Grundlage für einen durchgängigen Modellierung-, Simulations- und Integrationsprozess in der Anlageplanung. , in: AUTOMATION 2012, Baden Baden.' van: 'Faltinski S, Moriz N, Schetinin N, Niggemann O. AutomationML als Grundlage für einen durchgängigen Modellierung-, Simulations- und Integrationsprozess in der Anlageplanung. . In: AUTOMATION 2012. Baden Baden; 2012.' date_created: 2021-02-02T09:15:47Z date_updated: 2023-03-15T13:49:55Z department: - _id: DEP5023 language: - iso: eng place: Baden Baden publication: AUTOMATION 2012 status: public title: 'AutomationML als Grundlage für einen durchgängigen Modellierung-, Simulations- und Integrationsprozess in der Anlageplanung. ' type: conference user_id: '68554' year: 2012 ... --- _id: '4808' author: - first_name: Sebastian full_name: Faltinski, Sebastian last_name: Faltinski - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Natalia full_name: Moriz, Natalia id: '44238' last_name: Moriz - first_name: Andre full_name: Mankowski, Andre id: '51482' last_name: Mankowski citation: ama: 'Faltinski S, Niggemann O, Moriz N, Mankowski A. AutomationML: From Data Exchange to System Planning and Simulation. In: 2012 IEEE International Conference on Industrial Technology (ICIT). Athen, Griechenland; 2012.' apa: 'Faltinski, S., Niggemann, O., Moriz, N., & Mankowski, A. (2012). AutomationML: From Data Exchange to System Planning and Simulation. In 2012 IEEE International Conference on Industrial Technology (ICIT). Athen, Griechenland.' bjps: 'Faltinski S et al. (2012) AutomationML: From Data Exchange to System Planning and Simulation. 2012 IEEE International Conference on Industrial Technology (ICIT). Athen, Griechenland.' chicago: 'Faltinski, Sebastian, Oliver Niggemann, Natalia Moriz, and Andre Mankowski. “AutomationML: From Data Exchange to System Planning and Simulation.” In 2012 IEEE International Conference on Industrial Technology (ICIT). Athen, Griechenland, 2012.' chicago-de: 'Faltinski, Sebastian, Oliver Niggemann, Natalia Moriz und Andre Mankowski. 2012. AutomationML: From Data Exchange to System Planning and Simulation. In: 2012 IEEE International Conference on Industrial Technology (ICIT). Athen, Griechenland.' din1505-2-1: 'Faltinski, Sebastian ; Niggemann, Oliver ; Moriz, Natalia ; Mankowski, Andre: AutomationML: From Data Exchange to System Planning and Simulation. In: 2012 IEEE International Conference on Industrial Technology (ICIT). Athen, Griechenland, 2012' havard: 'S. Faltinski, O. Niggemann, N. Moriz, A. Mankowski, AutomationML: From Data Exchange to System Planning and Simulation, in: 2012 IEEE International Conference on Industrial Technology (ICIT), Athen, Griechenland, 2012.' ieee: 'S. Faltinski, O. Niggemann, N. Moriz, and A. Mankowski, “AutomationML: From Data Exchange to System Planning and Simulation,” in 2012 IEEE International Conference on Industrial Technology (ICIT), 2012.' mla: 'Faltinski, Sebastian, et al. “AutomationML: From Data Exchange to System Planning and Simulation.” 2012 IEEE International Conference on Industrial Technology (ICIT), 2012.' short: 'S. Faltinski, O. Niggemann, N. Moriz, A. Mankowski, in: 2012 IEEE International Conference on Industrial Technology (ICIT), Athen, Griechenland, 2012.' ufg: 'Faltinski, Sebastian et. al. (2012): AutomationML: From Data Exchange to System Planning and Simulation, in: 2012 IEEE International Conference on Industrial Technology (ICIT), Athen, Griechenland.' van: 'Faltinski S, Niggemann O, Moriz N, Mankowski A. AutomationML: From Data Exchange to System Planning and Simulation. In: 2012 IEEE International Conference on Industrial Technology (ICIT). Athen, Griechenland; 2012.' date_created: 2021-02-02T09:16:51Z date_updated: 2023-03-15T13:49:55Z department: - _id: DEP5023 language: - iso: eng place: Athen, Griechenland publication: 2012 IEEE International Conference on Industrial Technology (ICIT) status: public title: 'AutomationML: From Data Exchange to System Planning and Simulation' type: conference user_id: '68554' year: 2012 ... --- _id: '4683' author: - first_name: Sebastian full_name: Faltinski, Sebastian last_name: Faltinski - first_name: Michael full_name: Wienke, Michael last_name: Wienke - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Jürgen full_name: Jasperneite, Jürgen id: '1899' last_name: Jasperneite citation: ama: 'Faltinski S, Wienke M, Niggemann O, Jasperneite J. mINA - Eine echtzeitfähige Middleware für die Industrieautomation zur Realisierung semantikbasierter Wandelbarkeit . In: 2. Jahreskolloquium Kommunikation in Der Automation (KommA 2011). Magdeburg; 2011.' apa: Faltinski, S., Wienke, M., Niggemann, O., & Jasperneite, J. (2011). mINA - Eine echtzeitfähige Middleware für die Industrieautomation zur Realisierung semantikbasierter Wandelbarkeit . In 2. Jahreskolloquium Kommunikation in der Automation (KommA 2011). Magdeburg. bjps: Faltinski S et al. (2011) MINA - Eine Echtzeitfähige Middleware Für Die Industrieautomation Zur Realisierung Semantikbasierter Wandelbarkeit . 2. Jahreskolloquium Kommunikation in Der Automation (KommA 2011). Magdeburg. chicago: Faltinski, Sebastian, Michael Wienke, Oliver Niggemann, and Jürgen Jasperneite. “MINA - Eine Echtzeitfähige Middleware Für Die Industrieautomation Zur Realisierung Semantikbasierter Wandelbarkeit .” In 2. Jahreskolloquium Kommunikation in Der Automation (KommA 2011). Magdeburg, 2011. chicago-de: 'Faltinski, Sebastian, Michael Wienke, Oliver Niggemann und Jürgen Jasperneite. 2011. mINA - Eine echtzeitfähige Middleware für die Industrieautomation zur Realisierung semantikbasierter Wandelbarkeit . In: 2. Jahreskolloquium Kommunikation in der Automation (KommA 2011). Magdeburg.' din1505-2-1: 'Faltinski, Sebastian ; Wienke, Michael ; Niggemann, Oliver ; Jasperneite, Jürgen: mINA - Eine echtzeitfähige Middleware für die Industrieautomation zur Realisierung semantikbasierter Wandelbarkeit . In: 2. Jahreskolloquium Kommunikation in der Automation (KommA 2011). Magdeburg, 2011' havard: 'S. Faltinski, M. Wienke, O. Niggemann, J. Jasperneite, mINA - Eine echtzeitfähige Middleware für die Industrieautomation zur Realisierung semantikbasierter Wandelbarkeit , in: 2. Jahreskolloquium Kommunikation in Der Automation (KommA 2011), Magdeburg, 2011.' ieee: S. Faltinski, M. Wienke, O. Niggemann, and J. Jasperneite, “mINA - Eine echtzeitfähige Middleware für die Industrieautomation zur Realisierung semantikbasierter Wandelbarkeit ,” in 2. Jahreskolloquium Kommunikation in der Automation (KommA 2011), 2011. mla: Faltinski, Sebastian, et al. “MINA - Eine Echtzeitfähige Middleware Für Die Industrieautomation Zur Realisierung Semantikbasierter Wandelbarkeit .” 2. Jahreskolloquium Kommunikation in Der Automation (KommA 2011), 2011. short: 'S. Faltinski, M. Wienke, O. Niggemann, J. Jasperneite, in: 2. Jahreskolloquium Kommunikation in Der Automation (KommA 2011), Magdeburg, 2011.' ufg: 'Faltinski, Sebastian et. al. (2011): mINA - Eine echtzeitfähige Middleware für die Industrieautomation zur Realisierung semantikbasierter Wandelbarkeit , in: 2. Jahreskolloquium Kommunikation in der Automation (KommA 2011), Magdeburg.' van: 'Faltinski S, Wienke M, Niggemann O, Jasperneite J. mINA - Eine echtzeitfähige Middleware für die Industrieautomation zur Realisierung semantikbasierter Wandelbarkeit . In: 2 Jahreskolloquium Kommunikation in der Automation (KommA 2011). Magdeburg; 2011.' date_created: 2021-01-28T12:21:03Z date_updated: 2023-03-15T13:49:54Z department: - _id: DEP5023 - _id: DEP5019 language: - iso: eng place: Magdeburg publication: 2. Jahreskolloquium Kommunikation in der Automation (KommA 2011) status: public title: 'mINA - Eine echtzeitfähige Middleware für die Industrieautomation zur Realisierung semantikbasierter Wandelbarkeit ' type: conference user_id: '74222' year: 2011 ... --- _id: '4688' author: - first_name: Michael full_name: Wienke, Michael last_name: Wienke - first_name: Sebastian full_name: Faltinski, Sebastian last_name: Faltinski - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Jürgen full_name: Jasperneite, Jürgen id: '1899' last_name: Jasperneite citation: ama: 'Wienke M, Faltinski S, Niggemann O, Jasperneite J. mINA-DL: A Novel Description Language Enabling Dynamic Reconfiguration in Industrial Automation. In: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France; 2011.' apa: 'Wienke, M., Faltinski, S., Niggemann, O., & Jasperneite, J. (2011). mINA-DL: A Novel Description Language Enabling Dynamic Reconfiguration in Industrial Automation. In 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France.' bjps: 'Wienke M et al. (2011) MINA-DL: A Novel Description Language Enabling Dynamic Reconfiguration in Industrial Automation. 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France.' chicago: 'Wienke, Michael, Sebastian Faltinski, Oliver Niggemann, and Jürgen Jasperneite. “MINA-DL: A Novel Description Language Enabling Dynamic Reconfiguration in Industrial Automation.” In 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France, 2011.' chicago-de: 'Wienke, Michael, Sebastian Faltinski, Oliver Niggemann und Jürgen Jasperneite. 2011. mINA-DL: A Novel Description Language Enabling Dynamic Reconfiguration in Industrial Automation. In: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France.' din1505-2-1: 'Wienke, Michael ; Faltinski, Sebastian ; Niggemann, Oliver ; Jasperneite, Jürgen: mINA-DL: A Novel Description Language Enabling Dynamic Reconfiguration in Industrial Automation. In: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France, 2011' havard: 'M. Wienke, S. Faltinski, O. Niggemann, J. Jasperneite, mINA-DL: A Novel Description Language Enabling Dynamic Reconfiguration in Industrial Automation, in: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), Toulouse, France, 2011.' ieee: 'M. Wienke, S. Faltinski, O. Niggemann, and J. Jasperneite, “mINA-DL: A Novel Description Language Enabling Dynamic Reconfiguration in Industrial Automation,” in 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), 2011.' mla: 'Wienke, Michael, et al. “MINA-DL: A Novel Description Language Enabling Dynamic Reconfiguration in Industrial Automation.” 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), 2011.' short: 'M. Wienke, S. Faltinski, O. Niggemann, J. Jasperneite, in: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), Toulouse, France, 2011.' ufg: 'Wienke, Michael et. al. (2011): mINA-DL: A Novel Description Language Enabling Dynamic Reconfiguration in Industrial Automation, in: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), Toulouse, France.' van: 'Wienke M, Faltinski S, Niggemann O, Jasperneite J. mINA-DL: A Novel Description Language Enabling Dynamic Reconfiguration in Industrial Automation. In: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011). Toulouse, France; 2011.' date_created: 2021-01-28T12:26:31Z date_updated: 2023-03-15T13:49:55Z department: - _id: DEP5023 - _id: DEP5019 language: - iso: eng place: Toulouse, France publication: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011) status: public title: 'mINA-DL: A Novel Description Language Enabling Dynamic Reconfiguration in Industrial Automation' type: conference user_id: '74222' year: 2011 ... --- _id: '4703' author: - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Jürgen full_name: Jasperneite, Jürgen id: '1899' last_name: Jasperneite citation: ama: 'Niggemann O, Jasperneite J. Systemmodelle für wandelbare Automatisierungssysteme. In: 8. Symposium Informationstechnologien Für Entwicklung Und Produktion in Der Verfahrenstechnik Dechema. Frankfurt; 2011.' apa: Niggemann, O., & Jasperneite, J. (2011). Systemmodelle für wandelbare Automatisierungssysteme. In 8. Symposium Informationstechnologien für Entwicklung und Produktion in der Verfahrenstechnik Dechema. Frankfurt. bjps: Niggemann O and Jasperneite J (2011) Systemmodelle Für Wandelbare Automatisierungssysteme. 8. Symposium Informationstechnologien Für Entwicklung Und Produktion in Der Verfahrenstechnik Dechema. Frankfurt. chicago: Niggemann, Oliver, and Jürgen Jasperneite. “Systemmodelle Für Wandelbare Automatisierungssysteme.” In 8. Symposium Informationstechnologien Für Entwicklung Und Produktion in Der Verfahrenstechnik Dechema. Frankfurt, 2011. chicago-de: 'Niggemann, Oliver und Jürgen Jasperneite. 2011. Systemmodelle für wandelbare Automatisierungssysteme. In: 8. Symposium Informationstechnologien für Entwicklung und Produktion in der Verfahrenstechnik Dechema. Frankfurt.' din1505-2-1: 'Niggemann, Oliver ; Jasperneite, Jürgen: Systemmodelle für wandelbare Automatisierungssysteme. In: 8. Symposium Informationstechnologien für Entwicklung und Produktion in der Verfahrenstechnik Dechema : Frankfurt, 2011' havard: 'O. Niggemann, J. Jasperneite, Systemmodelle für wandelbare Automatisierungssysteme, in: 8. Symposium Informationstechnologien Für Entwicklung Und Produktion in Der Verfahrenstechnik Dechema, Frankfurt, 2011.' ieee: O. Niggemann and J. Jasperneite, “Systemmodelle für wandelbare Automatisierungssysteme,” in 8. Symposium Informationstechnologien für Entwicklung und Produktion in der Verfahrenstechnik Dechema, 2011. mla: Niggemann, Oliver, and Jürgen Jasperneite. “Systemmodelle Für Wandelbare Automatisierungssysteme.” 8. Symposium Informationstechnologien Für Entwicklung Und Produktion in Der Verfahrenstechnik Dechema, Frankfurt, 2011. short: 'O. Niggemann, J. Jasperneite, in: 8. Symposium Informationstechnologien Für Entwicklung Und Produktion in Der Verfahrenstechnik Dechema, Frankfurt, 2011.' ufg: 'Niggemann, Oliver/Jasperneite, Jürgen (2011): Systemmodelle für wandelbare Automatisierungssysteme, in: 8. Symposium Informationstechnologien für Entwicklung und Produktion in der Verfahrenstechnik Dechema.' van: 'Niggemann O, Jasperneite J. Systemmodelle für wandelbare Automatisierungssysteme. In: 8 Symposium Informationstechnologien für Entwicklung und Produktion in der Verfahrenstechnik Dechema. Frankfurt; 2011.' date_created: 2021-01-28T13:08:01Z date_updated: 2023-03-15T13:49:55Z department: - _id: DEP5023 - _id: DEP5019 language: - iso: eng publication: 8. Symposium Informationstechnologien für Entwicklung und Produktion in der Verfahrenstechnik Dechema publisher: Frankfurt status: public title: Systemmodelle für wandelbare Automatisierungssysteme type: conference user_id: '74222' year: 2011 ... --- _id: '4809' author: - first_name: Olaf full_name: Gräser, Olaf last_name: Gräser - first_name: Barath full_name: Kumar, Barath last_name: Kumar - first_name: Natalia full_name: Moriz, Natalia id: '44238' last_name: Moriz - first_name: Alexander full_name: Maier, Alexander id: '11158' last_name: Maier - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann citation: ama: 'Gräser O, Kumar B, Moriz N, Maier A, Niggemann O. AutomationML as a Basis for Offline- and Realtime-Simulation. In: ; 2011.' apa: Gräser, O., Kumar, B., Moriz, N., Maier, A., & Niggemann, O. (2011). AutomationML as a Basis for Offline- and Realtime-Simulation. bjps: Gräser O et al. (2011) AutomationML as a Basis for Offline- and Realtime-Simulation. chicago: Gräser, Olaf, Barath Kumar, Natalia Moriz, Alexander Maier, and Oliver Niggemann. “AutomationML as a Basis for Offline- and Realtime-Simulation,” 2011. chicago-de: 'Gräser, Olaf, Barath Kumar, Natalia Moriz, Alexander Maier und Oliver Niggemann. 2011. AutomationML as a Basis for Offline- and Realtime-Simulation. In: .' din1505-2-1: 'Gräser, Olaf ; Kumar, Barath ; Moriz, Natalia ; Maier, Alexander ; Niggemann, Oliver: AutomationML as a Basis for Offline- and Realtime-Simulation. In: , 2011' havard: 'O. Gräser, B. Kumar, N. Moriz, A. Maier, O. Niggemann, AutomationML as a Basis for Offline- and Realtime-Simulation, in: 2011.' ieee: O. Gräser, B. Kumar, N. Moriz, A. Maier, and O. Niggemann, “AutomationML as a Basis for Offline- and Realtime-Simulation,” 2011. mla: Gräser, Olaf, et al. AutomationML as a Basis for Offline- and Realtime-Simulation. 2011. short: 'O. Gräser, B. Kumar, N. Moriz, A. Maier, O. Niggemann, in: 2011.' ufg: 'Gräser, Olaf et. al. (2011): AutomationML as a Basis for Offline- and Realtime-Simulation, in: .' van: Gräser O, Kumar B, Moriz N, Maier A, Niggemann O. AutomationML as a Basis for Offline- and Realtime-Simulation. In 2011. date_created: 2021-02-02T09:18:06Z date_updated: 2023-03-15T13:49:55Z department: - _id: DEP5023 language: - iso: eng status: public title: AutomationML as a Basis for Offline- and Realtime-Simulation type: conference user_id: '68554' year: 2011 ... --- _id: '4810' author: - first_name: Natalia full_name: Moriz, Natalia id: '44238' last_name: Moriz - first_name: Sebastian full_name: Faltinski, Sebastian last_name: Faltinski - first_name: Olaf full_name: Gräser, Olaf last_name: Gräser - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Mike full_name: Barth, Mike last_name: Barth - first_name: Alexander full_name: Fay, Alexander last_name: Fay citation: ama: 'Moriz N, Faltinski S, Gräser O, Niggemann O, Barth M, Fay A. Integration und Anwendung von objektorientierten Simulationsmodellen in AutomationML. In: VDI Kongress AUTOMATION 2011 . Baden Baden; 2011.' apa: Moriz, N., Faltinski, S., Gräser, O., Niggemann, O., Barth, M., & Fay, A. (2011). Integration und Anwendung von objektorientierten Simulationsmodellen in AutomationML. In VDI Kongress AUTOMATION 2011 . Baden Baden. bjps: Moriz N et al. (2011) Integration Und Anwendung von Objektorientierten Simulationsmodellen in AutomationML. VDI Kongress AUTOMATION 2011 . Baden Baden. chicago: Moriz, Natalia, Sebastian Faltinski, Olaf Gräser, Oliver Niggemann, Mike Barth, and Alexander Fay. “Integration Und Anwendung von Objektorientierten Simulationsmodellen in AutomationML.” In VDI Kongress AUTOMATION 2011 . Baden Baden, 2011. chicago-de: 'Moriz, Natalia, Sebastian Faltinski, Olaf Gräser, Oliver Niggemann, Mike Barth und Alexander Fay. 2011. Integration und Anwendung von objektorientierten Simulationsmodellen in AutomationML. In: VDI Kongress AUTOMATION 2011 . Baden Baden.' din1505-2-1: 'Moriz, Natalia ; Faltinski, Sebastian ; Gräser, Olaf ; Niggemann, Oliver ; Barth, Mike ; Fay, Alexander: Integration und Anwendung von objektorientierten Simulationsmodellen in AutomationML. In: VDI Kongress AUTOMATION 2011  : Baden Baden, 2011' havard: 'N. Moriz, S. Faltinski, O. Gräser, O. Niggemann, M. Barth, A. Fay, Integration und Anwendung von objektorientierten Simulationsmodellen in AutomationML, in: VDI Kongress AUTOMATION 2011 , Baden Baden, 2011.' ieee: N. Moriz, S. Faltinski, O. Gräser, O. Niggemann, M. Barth, and A. Fay, “Integration und Anwendung von objektorientierten Simulationsmodellen in AutomationML,” in VDI Kongress AUTOMATION 2011 , 2011. mla: Moriz, Natalia, et al. “Integration Und Anwendung von Objektorientierten Simulationsmodellen in AutomationML.” VDI Kongress AUTOMATION 2011 , Baden Baden, 2011. short: 'N. Moriz, S. Faltinski, O. Gräser, O. Niggemann, M. Barth, A. Fay, in: VDI Kongress AUTOMATION 2011 , Baden Baden, 2011.' ufg: 'Moriz, Natalia et. al. (2011): Integration und Anwendung von objektorientierten Simulationsmodellen in AutomationML, in: VDI Kongress AUTOMATION 2011 .' van: 'Moriz N, Faltinski S, Gräser O, Niggemann O, Barth M, Fay A. Integration und Anwendung von objektorientierten Simulationsmodellen in AutomationML. In: VDI Kongress AUTOMATION 2011 . Baden Baden; 2011.' date_created: 2021-02-02T09:19:23Z date_updated: 2023-03-15T13:49:55Z department: - _id: DEP5023 language: - iso: eng publication: 'VDI Kongress AUTOMATION 2011 ' publisher: Baden Baden status: public title: Integration und Anwendung von objektorientierten Simulationsmodellen in AutomationML type: conference user_id: '68554' year: 2011 ... --- _id: '4454' author: - first_name: Barath full_name: Kumar, Barath last_name: Kumar - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Jürgen full_name: Jasperneite, Jürgen id: '1899' last_name: Jasperneite citation: ama: 'Kumar B, Niggemann O, Jasperneite J. Statistical Models of Network Traffic. In: ; 2010.' apa: Kumar, B., Niggemann, O., & Jasperneite, J. (2010). Statistical Models of Network Traffic. Presented at the International Conference on Computer, Electrical and Systems Science, Cape Town, South Africa. bjps: Kumar B, Niggemann O and Jasperneite J (2010) Statistical Models of Network Traffic. chicago: Kumar, Barath, Oliver Niggemann, and Jürgen Jasperneite. “Statistical Models of Network Traffic,” 2010. chicago-de: 'Kumar, Barath, Oliver Niggemann und Jürgen Jasperneite. 2010. Statistical Models of Network Traffic. In: .' din1505-2-1: 'Kumar, Barath ; Niggemann, Oliver ; Jasperneite, Jürgen: Statistical Models of Network Traffic. In: , 2010' havard: 'B. Kumar, O. Niggemann, J. Jasperneite, Statistical Models of Network Traffic, in: 2010.' ieee: B. Kumar, O. Niggemann, and J. Jasperneite, “Statistical Models of Network Traffic,” presented at the International Conference on Computer, Electrical and Systems Science, Cape Town, South Africa, 2010. mla: Kumar, Barath, et al. Statistical Models of Network Traffic. 2010. short: 'B. Kumar, O. Niggemann, J. Jasperneite, in: 2010.' ufg: 'Kumar, Barath et. al. (2010): Statistical Models of Network Traffic, in: .' van: Kumar B, Niggemann O, Jasperneite J. Statistical Models of Network Traffic. In 2010. conference: location: Cape Town, South Africa name: International Conference on Computer, Electrical and Systems Science date_created: 2021-01-20T08:12:07Z date_updated: 2023-03-15T13:49:53Z department: - _id: DEP5019 - _id: DEP5023 language: - iso: eng status: public title: Statistical Models of Network Traffic type: conference user_id: '45673' year: 2010 ... --- _id: '4455' author: - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Alexander full_name: Maier, Alexander id: '11158' last_name: Maier - first_name: Jürgen full_name: Jasperneite, Jürgen id: '1899' last_name: Jasperneite citation: ama: 'Niggemann O, Maier A, Jasperneite J. Model-based Development of Automation Systems. In: ; 2010.' apa: 'Niggemann, O., Maier, A., & Jasperneite, J. (2010). Model-based Development of Automation Systems. Presented at the 6. Dagstuhl-Workshop MBEES 2010: Modellbasierte Entwicklung eingebetteter Systeme.' bjps: Niggemann O, Maier A and Jasperneite J (2010) Model-Based Development of Automation Systems. chicago: Niggemann, Oliver, Alexander Maier, and Jürgen Jasperneite. “Model-Based Development of Automation Systems,” 2010. chicago-de: 'Niggemann, Oliver, Alexander Maier und Jürgen Jasperneite. 2010. Model-based Development of Automation Systems. In: .' din1505-2-1: 'Niggemann, Oliver ; Maier, Alexander ; Jasperneite, Jürgen: Model-based Development of Automation Systems. In: , 2010' havard: 'O. Niggemann, A. Maier, J. Jasperneite, Model-based Development of Automation Systems, in: 2010.' ieee: 'O. Niggemann, A. Maier, and J. Jasperneite, “Model-based Development of Automation Systems,” presented at the 6. Dagstuhl-Workshop MBEES 2010: Modellbasierte Entwicklung eingebetteter Systeme, 2010.' mla: Niggemann, Oliver, et al. Model-Based Development of Automation Systems. 2010. short: 'O. Niggemann, A. Maier, J. Jasperneite, in: 2010.' ufg: 'Niggemann, Oliver et. al. (2010): Model-based Development of Automation Systems, in: .' van: Niggemann O, Maier A, Jasperneite J. Model-based Development of Automation Systems. In 2010. conference: name: '6. Dagstuhl-Workshop MBEES 2010: Modellbasierte Entwicklung eingebetteter Systeme' date_created: 2021-01-20T08:16:41Z date_updated: 2023-03-15T13:49:53Z department: - _id: DEP5023 - _id: DEP5019 language: - iso: eng status: public title: Model-based Development of Automation Systems type: conference user_id: '45673' year: 2010 ... --- _id: '4464' author: - first_name: Barath full_name: Kumar, Barath last_name: Kumar - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Jürgen full_name: Jasperneite, Jürgen id: '1899' last_name: Jasperneite citation: ama: 'Kumar B, Niggemann O, Jasperneite J. Test Generation for Hybrid, Probabilistic Control Models. In: ; 2010.' apa: Kumar, B., Niggemann, O., & Jasperneite, J. (2010). Test Generation for Hybrid, Probabilistic Control Models. Presented at the Entwurf komplexer Automatisierungssysteme (EKA 2010) , Magdeburg, Germany. bjps: Kumar B, Niggemann O and Jasperneite J (2010) Test Generation for Hybrid, Probabilistic Control Models. chicago: Kumar, Barath, Oliver Niggemann, and Jürgen Jasperneite. “Test Generation for Hybrid, Probabilistic Control Models,” 2010. chicago-de: 'Kumar, Barath, Oliver Niggemann und Jürgen Jasperneite. 2010. Test Generation for Hybrid, Probabilistic Control Models. In: .' din1505-2-1: 'Kumar, Barath ; Niggemann, Oliver ; Jasperneite, Jürgen: Test Generation for Hybrid, Probabilistic Control Models. In: , 2010' havard: 'B. Kumar, O. Niggemann, J. Jasperneite, Test Generation for Hybrid, Probabilistic Control Models, in: 2010.' ieee: B. Kumar, O. Niggemann, and J. Jasperneite, “Test Generation for Hybrid, Probabilistic Control Models,” presented at the Entwurf komplexer Automatisierungssysteme (EKA 2010) , Magdeburg, Germany, 2010. mla: Kumar, Barath, et al. Test Generation for Hybrid, Probabilistic Control Models. 2010. short: 'B. Kumar, O. Niggemann, J. Jasperneite, in: 2010.' ufg: 'Kumar, Barath et. al. (2010): Test Generation for Hybrid, Probabilistic Control Models, in: .' van: Kumar B, Niggemann O, Jasperneite J. Test Generation for Hybrid, Probabilistic Control Models. In 2010. conference: location: Magdeburg, Germany name: 'Entwurf komplexer Automatisierungssysteme (EKA 2010) ' date_created: 2021-01-20T08:37:58Z date_updated: 2023-03-15T13:49:53Z department: - _id: DEP5023 - _id: DEP5019 language: - iso: eng status: public title: Test Generation for Hybrid, Probabilistic Control Models type: conference user_id: '45673' year: 2010 ... --- _id: '2088' abstract: - lang: eng text: "Clustering remains a major topic in machine learning; it is used e.g. for document categorization, for data mining, and for image analysis. In all these application areas, clustering algorithms try to identify groups of related data in large data sets.\r\n\r\nIn this paper, the established clustering algorithm MajorClust ([12]) is improved; making it applicable to data sets with few structure on the local scale—so called near-homogeneous graphs. This new algorithm MCProb is verified empirically using the problem of image clustering. Furthermore, MCProb is analyzed theoretically. For the applications examined so-far, MCProb outperforms other established clustering techniques." author: - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Volker full_name: Lohweg, Volker id: '1804' last_name: Lohweg orcid: 0000-0002-3325-7887 - first_name: Tim full_name: Tack, Tim last_name: Tack citation: ama: 'Niggemann O, Lohweg V, Tack T. A Probabilistic MajorClust Variant for the Clustering of Near-Homogeneous Graphs. In: 33rd Annual German Conference on Artificial Intelligence (KI 2010). Vol 6359. Lecture Notes in Computer Science. Berlin: Springer; 2010:184-194. doi:https://doi.org/10.1007/978-3-642-16111-7_21' apa: 'Niggemann, O., Lohweg, V., & Tack, T. (2010). A Probabilistic MajorClust Variant for the Clustering of Near-Homogeneous Graphs. In 33rd Annual German Conference on Artificial Intelligence (KI 2010) (Vol. 6359, pp. 184–194). Berlin: Springer. https://doi.org/10.1007/978-3-642-16111-7_21' bjps: 'Niggemann O, Lohweg V and Tack T (2010) A Probabilistic MajorClust Variant for the Clustering of Near-Homogeneous Graphs. 33rd Annual German Conference on Artificial Intelligence (KI 2010), vol. 6359. Berlin: Springer, pp. 184–194.' chicago: 'Niggemann, Oliver, Volker Lohweg, and Tim Tack. “A Probabilistic MajorClust Variant for the Clustering of Near-Homogeneous Graphs.” In 33rd Annual German Conference on Artificial Intelligence (KI 2010), 6359:184–94. Lecture Notes in Computer Science. Berlin: Springer, 2010. https://doi.org/10.1007/978-3-642-16111-7_21.' chicago-de: 'Niggemann, Oliver, Volker Lohweg und Tim Tack. 2010. A Probabilistic MajorClust Variant for the Clustering of Near-Homogeneous Graphs. In: 33rd Annual German Conference on Artificial Intelligence (KI 2010), 6359:184–194. Lecture Notes in Computer Science. Berlin: Springer. doi:https://doi.org/10.1007/978-3-642-16111-7_21, .' din1505-2-1: 'Niggemann, Oliver ; Lohweg, Volker ; Tack, Tim: A Probabilistic MajorClust Variant for the Clustering of Near-Homogeneous Graphs. In: 33rd Annual German Conference on Artificial Intelligence (KI 2010), Lecture Notes in Computer Science. Bd. 6359. Berlin : Springer, 2010, S. 184–194' havard: 'O. Niggemann, V. Lohweg, T. Tack, A Probabilistic MajorClust Variant for the Clustering of Near-Homogeneous Graphs, in: 33rd Annual German Conference on Artificial Intelligence (KI 2010), Springer, Berlin, 2010: pp. 184–194.' ieee: O. Niggemann, V. Lohweg, and T. Tack, “A Probabilistic MajorClust Variant for the Clustering of Near-Homogeneous Graphs,” in 33rd Annual German Conference on Artificial Intelligence (KI 2010), 2010, vol. 6359, pp. 184–194. mla: Niggemann, Oliver, et al. “A Probabilistic MajorClust Variant for the Clustering of Near-Homogeneous Graphs.” 33rd Annual German Conference on Artificial Intelligence (KI 2010), vol. 6359, Springer, 2010, pp. 184–94, doi:https://doi.org/10.1007/978-3-642-16111-7_21. short: 'O. Niggemann, V. Lohweg, T. Tack, in: 33rd Annual German Conference on Artificial Intelligence (KI 2010), Springer, Berlin, 2010, pp. 184–194.' ufg: 'Niggemann, Oliver et. al. (2010): A Probabilistic MajorClust Variant for the Clustering of Near-Homogeneous Graphs, in: 33rd Annual German Conference on Artificial Intelligence (KI 2010) (=Lecture Notes in Computer Science 6359), Berlin, S. 184–194.' van: 'Niggemann O, Lohweg V, Tack T. A Probabilistic MajorClust Variant for the Clustering of Near-Homogeneous Graphs. In: 33rd Annual German Conference on Artificial Intelligence (KI 2010). Berlin: Springer; 2010. p. 184–94. (Lecture Notes in Computer Science; vol. 6359).' date_created: 2019-12-02T08:21:26Z date_updated: 2023-03-15T13:49:38Z department: - _id: DEP5023 doi: https://doi.org/10.1007/978-3-642-16111-7_21 intvolume: ' 6359' keyword: - Markov Chain - Cluster Algorithm - Edge Weight - Spectral Cluster - Stable Distribution language: - iso: eng main_file_link: - url: https://link.springer.com/chapter/10.1007/978-3-642-16111-7_21 page: 184-194 place: Berlin publication: 33rd Annual German Conference on Artificial Intelligence (KI 2010) publication_identifier: eisbn: - 978-3-642-16111-7 isbn: - 978-3-642-16110-0 publication_status: published publisher: Springer series_title: Lecture Notes in Computer Science status: public title: A Probabilistic MajorClust Variant for the Clustering of Near-Homogeneous Graphs type: conference user_id: '45673' volume: 6359 year: 2010 ... --- _id: '2083' author: - first_name: Volker full_name: Lohweg, Volker id: '1804' last_name: Lohweg orcid: 0000-0002-3325-7887 - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann citation: ama: 'Lohweg V, Niggemann O. Machine Learning in Real-time Applications (MLRTA09 - KI 2009 Workshop). In: Lemgoer Schriften Zur Industriellen Informationstechnik (Lemgo Series on Industrial Information Technology), Vol. 3, ISSN 1869-2087, Lemgo 2009. ; 2009.' apa: Lohweg, V., & Niggemann, O. (2009). Machine Learning in Real-time Applications (MLRTA09 - KI 2009 Workshop). In Lemgoer Schriften zur industriellen Informationstechnik (Lemgo Series on Industrial Information Technology), Vol. 3, ISSN 1869-2087, Lemgo 2009. bjps: Lohweg V and Niggemann O (2009) Machine Learning in Real-Time Applications (MLRTA09 - KI 2009 Workshop). Lemgoer Schriften Zur Industriellen Informationstechnik (Lemgo Series on Industrial Information Technology), Vol. 3, ISSN 1869-2087, Lemgo 2009. chicago: Lohweg, Volker, and Oliver Niggemann. “Machine Learning in Real-Time Applications (MLRTA09 - KI 2009 Workshop).” In Lemgoer Schriften Zur Industriellen Informationstechnik (Lemgo Series on Industrial Information Technology), Vol. 3, ISSN 1869-2087, Lemgo 2009, 2009. chicago-de: 'Lohweg, Volker und Oliver Niggemann. 2009. Machine Learning in Real-time Applications (MLRTA09 - KI 2009 Workshop). In: Lemgoer Schriften zur industriellen Informationstechnik (Lemgo Series on Industrial Information Technology), Vol. 3, ISSN 1869-2087, Lemgo 2009.' din1505-2-1: 'Lohweg, Volker ; Niggemann, Oliver: Machine Learning in Real-time Applications (MLRTA09 - KI 2009 Workshop). In: Lemgoer Schriften zur industriellen Informationstechnik (Lemgo Series on Industrial Information Technology), Vol. 3, ISSN 1869-2087, Lemgo 2009, 2009' havard: 'V. Lohweg, O. Niggemann, Machine Learning in Real-time Applications (MLRTA09 - KI 2009 Workshop), in: Lemgoer Schriften Zur Industriellen Informationstechnik (Lemgo Series on Industrial Information Technology), Vol. 3, ISSN 1869-2087, Lemgo 2009, 2009.' ieee: V. Lohweg and O. Niggemann, “Machine Learning in Real-time Applications (MLRTA09 - KI 2009 Workshop),” in Lemgoer Schriften zur industriellen Informationstechnik (Lemgo Series on Industrial Information Technology), Vol. 3, ISSN 1869-2087, Lemgo 2009, 2009. mla: Lohweg, Volker, and Oliver Niggemann. “Machine Learning in Real-Time Applications (MLRTA09 - KI 2009 Workshop).” Lemgoer Schriften Zur Industriellen Informationstechnik (Lemgo Series on Industrial Information Technology), Vol. 3, ISSN 1869-2087, Lemgo 2009, 2009. short: 'V. Lohweg, O. Niggemann, in: Lemgoer Schriften Zur Industriellen Informationstechnik (Lemgo Series on Industrial Information Technology), Vol. 3, ISSN 1869-2087, Lemgo 2009, 2009.' ufg: 'Lohweg, Volker/Niggemann, Oliver (2009): Machine Learning in Real-time Applications (MLRTA09 - KI 2009 Workshop), in: Lemgoer Schriften zur industriellen Informationstechnik (Lemgo Series on Industrial Information Technology), Vol. 3, ISSN 1869-2087, Lemgo 2009.' van: 'Lohweg V, Niggemann O. Machine Learning in Real-time Applications (MLRTA09 - KI 2009 Workshop). In: Lemgoer Schriften zur industriellen Informationstechnik (Lemgo Series on Industrial Information Technology), Vol 3, ISSN 1869-2087, Lemgo 2009. 2009.' date_created: 2019-11-29T14:59:42Z date_updated: 2023-03-15T13:49:38Z department: - _id: DEP5023 language: - iso: eng publication: Lemgoer Schriften zur industriellen Informationstechnik (Lemgo Series on Industrial Information Technology), Vol. 3, ISSN 1869-2087, Lemgo 2009 status: public title: Machine Learning in Real-time Applications (MLRTA09 - KI 2009 Workshop) type: conference user_id: '45673' year: 2009 ... --- _id: '4715' author: - first_name: Barath full_name: Kumar, Barath last_name: Kumar - first_name: Oliver full_name: Niggemann, Oliver id: '10876' last_name: Niggemann - first_name: Jürgen full_name: Jasperneite, Jürgen id: '1899' last_name: Jasperneite citation: ama: 'Kumar B, Niggemann O, Jasperneite J. Timed Automata for Modeling Network Traffic. In: Machine Learning in Real-Time Applications (MLRTA 09) (in Conjunction with 32nd Annual Conference on Artificial Intelligence (KI 2009)). Paderborn, Germany; 2009.' apa: Kumar, B., Niggemann, O., & Jasperneite, J. (2009). Timed Automata for Modeling Network Traffic. In Machine Learning in Real-Time Applications (MLRTA 09) (in conjunction with 32nd Annual Conference on Artificial Intelligence (KI 2009)). Paderborn, Germany. bjps: Kumar B, Niggemann O and Jasperneite J (2009) Timed Automata for Modeling Network Traffic. Machine Learning in Real-Time Applications (MLRTA 09) (in Conjunction with 32nd Annual Conference on Artificial Intelligence (KI 2009)). Paderborn, Germany. chicago: Kumar, Barath, Oliver Niggemann, and Jürgen Jasperneite. “Timed Automata for Modeling Network Traffic.” In Machine Learning in Real-Time Applications (MLRTA 09) (in Conjunction with 32nd Annual Conference on Artificial Intelligence (KI 2009)). Paderborn, Germany, 2009. chicago-de: 'Kumar, Barath, Oliver Niggemann und Jürgen Jasperneite. 2009. Timed Automata for Modeling Network Traffic. In: Machine Learning in Real-Time Applications (MLRTA 09) (in conjunction with 32nd Annual Conference on Artificial Intelligence (KI 2009)). Paderborn, Germany.' din1505-2-1: 'Kumar, Barath ; Niggemann, Oliver ; Jasperneite, Jürgen: Timed Automata for Modeling Network Traffic. In: Machine Learning in Real-Time Applications (MLRTA 09) (in conjunction with 32nd Annual Conference on Artificial Intelligence (KI 2009)). Paderborn, Germany, 2009' havard: 'B. Kumar, O. Niggemann, J. Jasperneite, Timed Automata for Modeling Network Traffic, in: Machine Learning in Real-Time Applications (MLRTA 09) (in Conjunction with 32nd Annual Conference on Artificial Intelligence (KI 2009)), Paderborn, Germany, 2009.' ieee: B. Kumar, O. Niggemann, and J. Jasperneite, “Timed Automata for Modeling Network Traffic,” in Machine Learning in Real-Time Applications (MLRTA 09) (in conjunction with 32nd Annual Conference on Artificial Intelligence (KI 2009)), 2009. mla: Kumar, Barath, et al. “Timed Automata for Modeling Network Traffic.” Machine Learning in Real-Time Applications (MLRTA 09) (in Conjunction with 32nd Annual Conference on Artificial Intelligence (KI 2009)), 2009. short: 'B. Kumar, O. Niggemann, J. Jasperneite, in: Machine Learning in Real-Time Applications (MLRTA 09) (in Conjunction with 32nd Annual Conference on Artificial Intelligence (KI 2009)), Paderborn, Germany, 2009.' ufg: 'Kumar, Barath et. al. (2009): Timed Automata for Modeling Network Traffic, in: Machine Learning in Real-Time Applications (MLRTA 09) (in conjunction with 32nd Annual Conference on Artificial Intelligence (KI 2009)), Paderborn, Germany.' van: 'Kumar B, Niggemann O, Jasperneite J. Timed Automata for Modeling Network Traffic. In: Machine Learning in Real-Time Applications (MLRTA 09) (in conjunction with 32nd Annual Conference on Artificial Intelligence (KI 2009)). Paderborn, Germany; 2009.' date_created: 2021-01-28T13:42:53Z date_updated: 2023-03-15T13:49:55Z department: - _id: DEP5023 - _id: DEP5019 language: - iso: eng place: Paderborn, Germany publication: Machine Learning in Real-Time Applications (MLRTA 09) (in conjunction with 32nd Annual Conference on Artificial Intelligence (KI 2009)) status: public title: Timed Automata for Modeling Network Traffic type: conference user_id: '74222' year: 2009 ...