--- _id: '11194' abstract: - lang: eng text: Additive Manufacturing (AM) hat die Entwicklung und die Herstellung von Produkten revolutioniert. Durch die Verwendung dieser Technologien ist es möglich kosteneffizient und anforderungsgerecht geringe Stückzahlen herzustellen. Unterschiedliche additive Herstellungstechnologien, wie beispielsweise Fused Layer Modeling (FLM), ermöglichen die Herstellung von Multimaterialkomponenten innerhalb eines Herstellungsschritts. Dies wird erreicht durch die simultane Verwendung von verschiedenen Materialien.Die beim FLM verwendeten Materialien können unterschiedliche Schmelztemperaturen aufweisen. Zudem existieren Materialien, die im Wellenlängenbereich typischer Sensor- und Kommunikationsanwendungen optisch transparent sind. Werden optisch transparente und nicht transparente Materialien mit unterschiedlichen Brechungsindices kombiniert, so ist es möglich lichtführende Strukturen herzustellen. Diese beinhalten alle Vorteile der additiven Herstellungsverfahren.Die lichtführenden Strukturen können in komplexe Komponenten und Systeme wie beispielsweise einem Greifer eines Industrieroboters eingebettet werden. Hier kann der Greifer simultan mit zusätzlicher Sensor- und Kommunikationstechnik gedruckt werden.In diesem Abstrakt werden erste Sensorkomponenten präsentiert. Diese sind mit dem FLM-Verfahren hergestellt worden und es werden Materialien mit unterschiedlichen Transmissionsverhalten verwendet. Zusätzlich werden erste Layout und Herstellungsrichtlinien zur Erstellung von lichtführenden Strukturen mit FLM vorgestellt. author: - first_name: Oliver full_name: Stübbe, Oliver id: '51864' last_name: Stübbe orcid: https://orcid.org/0000-0001-7293-6893 - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol citation: ama: Stübbe O, Villmer FJ, Huxol A. 3D gedruckte eingebettete lichtführende Strukturen für Sensor- und Kommunikationsanwendungen. (Kynast M, Eichmann M, Witt G, eds.). Carl Hanser Verlag GmbH & Co. KG; 2023. doi:10.1007/978-3-446-45812-3_30 apa: 'Stübbe, O., Villmer, F.-J., & Huxol, A. (2023). 3D gedruckte eingebettete lichtführende Strukturen für Sensor- und Kommunikationsanwendungen. In M. Kynast, M. Eichmann, & G. Witt (Eds.), Rapid.Tech + FabCon 3.D – International Trade Show + Conference for Additive Manufacturing : Proceedings of the 15th Rapid.Tech Conference Erfurt, Germany, 5 – 7 June 2018 . Carl Hanser Verlag GmbH & Co. KG. https://doi.org/10.1007/978-3-446-45812-3_30' bjps: 'Stübbe O, Villmer F-J and Huxol A (2023) 3D gedruckte eingebettete lichtführende Strukturen für Sensor- und Kommunikationsanwendungen, Kynast M, Eichmann M and Witt G (eds). München, Germany: Carl Hanser Verlag GmbH & Co. KG.' chicago: 'Stübbe, Oliver, Franz-Josef Villmer, and Andrea Huxol. 3D gedruckte eingebettete lichtführende Strukturen für Sensor- und Kommunikationsanwendungen. Edited by Michael Kynast, Michael Eichmann, and Gerd Witt. Rapid.Tech + FabCon 3.D – International Trade Show + Conference for Additive Manufacturing : Proceedings of the 15th Rapid.Tech Conference Erfurt, Germany, 5 – 7 June 2018 . München, Germany: Carl Hanser Verlag GmbH & Co. KG, 2023. https://doi.org/10.1007/978-3-446-45812-3_30.' chicago-de: 'Stübbe, Oliver, Franz-Josef Villmer und Andrea Huxol. 2023. 3D gedruckte eingebettete lichtführende Strukturen für Sensor- und Kommunikationsanwendungen. Hg. von Michael Kynast, Michael Eichmann, und Gerd Witt. Rapid.Tech + FabCon 3.D – International Trade Show + Conference for Additive Manufacturing : Proceedings of the 15th Rapid.Tech Conference Erfurt, Germany, 5 – 7 June 2018 . München, Germany: Carl Hanser Verlag GmbH & Co. KG. doi:10.1007/978-3-446-45812-3_30, .' din1505-2-1: 'Stübbe, Oliver ; Villmer, Franz-Josef ; Huxol, Andrea ; Kynast, M. ; Eichmann, M. ; Witt, G. (Hrsg.): 3D gedruckte eingebettete lichtführende Strukturen für Sensor- und Kommunikationsanwendungen. München, Germany : Carl Hanser Verlag GmbH & Co. KG, 2023' havard: O. Stübbe, F.-J. Villmer, A. Huxol, 3D gedruckte eingebettete lichtführende Strukturen für Sensor- und Kommunikationsanwendungen, Carl Hanser Verlag GmbH & Co. KG, München, Germany, 2023. ieee: 'O. Stübbe, F.-J. Villmer, and A. Huxol, 3D gedruckte eingebettete lichtführende Strukturen für Sensor- und Kommunikationsanwendungen. München, Germany: Carl Hanser Verlag GmbH & Co. KG, 2023. doi: 10.1007/978-3-446-45812-3_30.' mla: 'Stübbe, Oliver, et al. “3D gedruckte eingebettete lichtführende Strukturen für Sensor- und Kommunikationsanwendungen.” Rapid.Tech + FabCon 3.D – International Trade Show + Conference for Additive Manufacturing : Proceedings of the 15th Rapid.Tech Conference Erfurt, Germany, 5 – 7 June 2018 , edited by Michael Kynast et al., Carl Hanser Verlag GmbH & Co. KG, 2023, https://doi.org/10.1007/978-3-446-45812-3_30.' short: O. Stübbe, F.-J. Villmer, A. Huxol, 3D gedruckte eingebettete lichtführende Strukturen für Sensor- und Kommunikationsanwendungen, Carl Hanser Verlag GmbH & Co. KG, München, Germany, 2023. ufg: 'Stübbe, Oliver/Villmer, Franz-Josef/Huxol, Andrea: 3D gedruckte eingebettete lichtführende Strukturen für Sensor- und Kommunikationsanwendungen, hg. von Kynast, Michael/Eichmann, Michael/Witt, Gerd, München, Germany 2023.' van: 'Stübbe O, Villmer FJ, Huxol A. 3D gedruckte eingebettete lichtführende Strukturen für Sensor- und Kommunikationsanwendungen. Kynast M, Eichmann M, Witt G, editors. Rapid.Tech + FabCon 3.D – International Trade Show + Conference for Additive Manufacturing : Proceedings of the 15th Rapid.Tech Conference Erfurt, Germany, 5 – 7 June 2018 . München, Germany: Carl Hanser Verlag GmbH & Co. KG; 2023.' conference: end_date: 2018-06-07 location: Erfurt name: 15th Rapid.Tech Conference start_date: 2018-06-05 date_created: 2024-03-07T13:41:15Z date_updated: 2024-04-19T11:57:05Z department: - _id: DEP5020 - _id: DEP6020 - _id: DEP5000 doi: 10.1007/978-3-446-45812-3_30 editor: - first_name: 'Michael ' full_name: 'Kynast, Michael ' last_name: Kynast - first_name: 'Michael ' full_name: 'Eichmann, Michael ' last_name: Eichmann - first_name: 'Gerd ' full_name: 'Witt, Gerd ' last_name: Witt language: - iso: ger place: München, Germany publication: 'Rapid.Tech + FabCon 3.D – International Trade Show + Conference for Additive Manufacturing : Proceedings of the 15th Rapid.Tech Conference Erfurt, Germany, 5 – 7 June 2018 ' publication_identifier: eissn: - 978-3-446-45812-3 isbn: - '978-3-446-45811-6 ' publication_status: published publisher: Carl Hanser Verlag GmbH & Co. KG status: public title: 3D gedruckte eingebettete lichtführende Strukturen für Sensor- und Kommunikationsanwendungen type: conference_editor_article user_id: '51864' year: '2023' ... --- _id: '12789' abstract: - lang: eng text: Additive manufacturing is being increasingly focused on the production of end-use parts. Compared to the prototyping application, the production of end-use parts demands a higher level of repeatability and process quality. To achieve this, increased knowledge is required about the influence of various process parameters on the part characteristics and the parameter interrelations. Design of Experiment methods can be applied to gain knowledge on the process behavior, but the applicability of different DoE methods for AM processes has to be validated. This paper describes the application of a definitive screening design for the identification of influencing parameters in Laser Powder Bed Fusion of CoCrW alloy. The impact of various hatch parameters on the part porosity is analyzed. The experimental setup and results are described. The results are validated in an additional test series, comparing the part quality achieved by parameter-sets obtained by different optimization approaches. Furthermore, the correlation of the porosity towards mechanical properties is investigated. Finally, the opportunities and limitations of the method are discussed. author: - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: Huxol A, Villmer FJ. Experimental approach towards parameter evaluation in laser powder bed fusion of metals. International Journal of Computer Integrated Manufacturing. 2021;35(4-5):556-567. doi:10.1080/0951192x.2021.1901313 apa: Huxol, A., & Villmer, F.-J. (2021). Experimental approach towards parameter evaluation in laser powder bed fusion of metals. International Journal of Computer Integrated Manufacturing, 35(4–5), 556–567. https://doi.org/10.1080/0951192x.2021.1901313 bjps: Huxol A and Villmer F-J (2021) Experimental Approach towards Parameter Evaluation in Laser Powder Bed Fusion of Metals. International Journal of Computer Integrated Manufacturing 35, 556–567. chicago: 'Huxol, Andrea, and Franz-Josef Villmer. “Experimental Approach towards Parameter Evaluation in Laser Powder Bed Fusion of Metals.” International Journal of Computer Integrated Manufacturing 35, no. 4–5 (2021): 556–67. https://doi.org/10.1080/0951192x.2021.1901313.' chicago-de: 'Huxol, Andrea und Franz-Josef Villmer. 2021. Experimental approach towards parameter evaluation in laser powder bed fusion of metals. International Journal of Computer Integrated Manufacturing 35, Nr. 4–5: 556–567. doi:10.1080/0951192x.2021.1901313, .' din1505-2-1: 'Huxol, Andrea ; Villmer, Franz-Josef: Experimental approach towards parameter evaluation in laser powder bed fusion of metals. In: International Journal of Computer Integrated Manufacturing Bd. 35. London [u.a.], Taylor & Francis (2021), Nr. 4–5, S. 556–567' havard: A. Huxol, F.-J. Villmer, Experimental approach towards parameter evaluation in laser powder bed fusion of metals, International Journal of Computer Integrated Manufacturing. 35 (2021) 556–567. ieee: 'A. Huxol and F.-J. Villmer, “Experimental approach towards parameter evaluation in laser powder bed fusion of metals,” International Journal of Computer Integrated Manufacturing, vol. 35, no. 4–5, pp. 556–567, 2021, doi: 10.1080/0951192x.2021.1901313.' mla: Huxol, Andrea, and Franz-Josef Villmer. “Experimental Approach towards Parameter Evaluation in Laser Powder Bed Fusion of Metals.” International Journal of Computer Integrated Manufacturing, vol. 35, no. 4–5, 2021, pp. 556–67, https://doi.org/10.1080/0951192x.2021.1901313. short: A. Huxol, F.-J. Villmer, International Journal of Computer Integrated Manufacturing 35 (2021) 556–567. ufg: 'Huxol, Andrea/Villmer, Franz-Josef: Experimental approach towards parameter evaluation in laser powder bed fusion of metals, in: International Journal of Computer Integrated Manufacturing 35 (2021), H. 4–5,  S. 556–567.' van: Huxol A, Villmer FJ. Experimental approach towards parameter evaluation in laser powder bed fusion of metals. International Journal of Computer Integrated Manufacturing. 2021;35(4–5):556–67. date_created: 2025-04-15T08:18:06Z date_updated: 2025-06-26T07:56:42Z department: - _id: DEP7000 doi: 10.1080/0951192x.2021.1901313 external_id: isi: - '000630944800001' intvolume: ' 35' isi: '1' issue: 4-5 keyword: - Additive manufacturing - quality control - process qualification - process control - screening design language: - iso: eng page: 556-567 place: London [u.a.] publication: International Journal of Computer Integrated Manufacturing publication_identifier: eissn: - 1362-3052 issn: - 0951-192X publication_status: published publisher: Taylor & Francis status: public title: Experimental approach towards parameter evaluation in laser powder bed fusion of metals type: scientific_journal_article user_id: '83781' volume: 35 year: '2021' ... --- _id: '12790' abstract: - lang: eng text: n the last years, Additive Manufacturing, thanks to its capability of continuous improvements in performance and cost-efficiency, was able to partly replace and redefine well-established manufacturing processes. This research is based on the idea to achieve great cost and operational benefits especially in the field of tool making for injection molding by combining traditional and additive manufacturing in one process chain. Special attention is given to the surface quality in terms of surface roughness and its optimization directly in the Selective Laser Melting process. This article presents the possibility for a remelting process of the SLM parts as a way to optimize the surfaces of the produced parts. The influence of laser remelting on the surface roughness of the parts is analyzed while varying machine parameters like laser power and scan settings. Laser remelting with optimized parameter settings considerably improves the surface quality of SLM parts and is a great starting point for further post-processing techniques, which require a low initial value of surface roughness. author: - first_name: Filippo full_name: Simoni, Filippo last_name: Simoni - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: Simoni F, Huxol A, Villmer FJ. Improving surface quality in selective laser melting based tool making. Journal of Intelligent Manufacturing. 2021;32(7):1927-1938. doi:10.1007/s10845-021-01744-9 apa: Simoni, F., Huxol, A., & Villmer, F.-J. (2021). Improving surface quality in selective laser melting based tool making. Journal of Intelligent Manufacturing, 32(7), 1927–1938. https://doi.org/10.1007/s10845-021-01744-9 bjps: Simoni F, Huxol A and Villmer F-J (2021) Improving Surface Quality in Selective Laser Melting Based Tool Making. Journal of Intelligent Manufacturing 32, 1927–1938. chicago: 'Simoni, Filippo, Andrea Huxol, and Franz-Josef Villmer. “Improving Surface Quality in Selective Laser Melting Based Tool Making.” Journal of Intelligent Manufacturing 32, no. 7 (2021): 1927–38. https://doi.org/10.1007/s10845-021-01744-9.' chicago-de: 'Simoni, Filippo, Andrea Huxol und Franz-Josef Villmer. 2021. Improving surface quality in selective laser melting based tool making. Journal of Intelligent Manufacturing 32, Nr. 7: 1927–1938. doi:10.1007/s10845-021-01744-9, .' din1505-2-1: 'Simoni, Filippo ; Huxol, Andrea ; Villmer, Franz-Josef: Improving surface quality in selective laser melting based tool making. In: Journal of Intelligent Manufacturing Bd. 32. Dordrecht [u.a.], Springer Science and Business Media (2021), Nr. 7, S. 1927–1938' havard: F. Simoni, A. Huxol, F.-J. Villmer, Improving surface quality in selective laser melting based tool making, Journal of Intelligent Manufacturing. 32 (2021) 1927–1938. ieee: 'F. Simoni, A. Huxol, and F.-J. Villmer, “Improving surface quality in selective laser melting based tool making,” Journal of Intelligent Manufacturing, vol. 32, no. 7, pp. 1927–1938, 2021, doi: 10.1007/s10845-021-01744-9.' mla: Simoni, Filippo, et al. “Improving Surface Quality in Selective Laser Melting Based Tool Making.” Journal of Intelligent Manufacturing, vol. 32, no. 7, 2021, pp. 1927–38, https://doi.org/10.1007/s10845-021-01744-9. short: F. Simoni, A. Huxol, F.-J. Villmer, Journal of Intelligent Manufacturing 32 (2021) 1927–1938. ufg: 'Simoni, Filippo/Huxol, Andrea/Villmer, Franz-Josef: Improving surface quality in selective laser melting based tool making, in: Journal of Intelligent Manufacturing 32 (2021), H. 7,  S. 1927–1938.' van: Simoni F, Huxol A, Villmer FJ. Improving surface quality in selective laser melting based tool making. Journal of Intelligent Manufacturing. 2021;32(7):1927–38. date_created: 2025-04-15T09:17:22Z date_updated: 2025-06-26T13:41:37Z department: - _id: DEP7000 doi: 10.1007/s10845-021-01744-9 external_id: isi: - '000636136100001' intvolume: ' 32' isi: '1' issue: '7' keyword: - Direct rapid tooling - Toolmaking - Additive manufacturing process chain - Process control - Production systems - Selective laser melting - Surface roughness - Laser surface remelting language: - iso: eng page: 1927-1938 place: Dordrecht [u.a.] publication: Journal of Intelligent Manufacturing publication_identifier: eissn: - 1572-8145 issn: - 0956-5515 publication_status: published publisher: Springer Science and Business Media status: public title: Improving surface quality in selective laser melting based tool making type: scientific_journal_article user_id: '83781' volume: 32 year: '2021' ... --- _id: '12791' abstract: - lang: eng text: Additive manufacturing is being increasingly focused on the production of end-use parts. Compared to the prototyping application, the production of end-use parts demands a higher level of repeatability and process quality. To achieve this, increased knowledge is required about the influence of various process parameters on the part characteristics and the parameter interrelations. Design of Experiment methods can be applied to gain knowledge on the process behavior, but the applicability of different DoE methods for AM processes has to be validated. This paper describes the application of a definitive screening design for the identification of influencing parameters in Selective Laser Melting. The experimental setup and results are described and opportunities and limitations of the method are discussed. (C) 2019, IFAC (International Federation of Automatic Control) Hosting by Elsevier Ltd. All rights reserved. author: - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: Huxol A, Villmer FJ. DoE Methods for Parameter Evaluation in Selective Laser Melting. Vol 52. Elsevier BV; 2019:270-275. doi:10.1016/j.ifacol.2019.10.041 apa: Huxol, A., & Villmer, F.-J. (2019). DoE Methods for Parameter Evaluation in Selective Laser Melting. In 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS) (Vol. 52, pp. 270–275). Elsevier BV. https://doi.org/10.1016/j.ifacol.2019.10.041 bjps: 'Huxol A and Villmer F-J (2019) DoE Methods for Parameter Evaluation in Selective Laser Melting. Amsterdam [u.a.]: Elsevier BV.' chicago: 'Huxol, Andrea, and Franz-Josef Villmer. DoE Methods for Parameter Evaluation in Selective Laser Melting. 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS). Vol. 52. IFAC-PapersOnLine. Amsterdam [u.a.]: Elsevier BV, 2019. https://doi.org/10.1016/j.ifacol.2019.10.041.' chicago-de: 'Huxol, Andrea und Franz-Josef Villmer. 2019. DoE Methods for Parameter Evaluation in Selective Laser Melting. 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS). Bd. 52. IFAC-PapersOnLine. Amsterdam [u.a.]: Elsevier BV. doi:10.1016/j.ifacol.2019.10.041, .' din1505-2-1: 'Huxol, Andrea ; Villmer, Franz-Josef: DoE Methods for Parameter Evaluation in Selective Laser Melting, IFAC-PapersOnLine. Bd. 52. Amsterdam [u.a.] : Elsevier BV, 2019' havard: A. Huxol, F.-J. Villmer, DoE Methods for Parameter Evaluation in Selective Laser Melting, Elsevier BV, Amsterdam [u.a.], 2019. ieee: 'A. Huxol and F.-J. Villmer, DoE Methods for Parameter Evaluation in Selective Laser Melting, vol. 52. Amsterdam [u.a.]: Elsevier BV, 2019, pp. 270–275. doi: 10.1016/j.ifacol.2019.10.041.' mla: Huxol, Andrea, and Franz-Josef Villmer. “DoE Methods for Parameter Evaluation in Selective Laser Melting.” 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS), vol. 52, Elsevier BV, 2019, pp. 270–75, https://doi.org/10.1016/j.ifacol.2019.10.041. short: A. Huxol, F.-J. Villmer, DoE Methods for Parameter Evaluation in Selective Laser Melting, Elsevier BV, Amsterdam [u.a.], 2019. ufg: 'Huxol, Andrea/Villmer, Franz-Josef: DoE Methods for Parameter Evaluation in Selective Laser Melting, Bd. 52, Amsterdam [u.a.] 2019 (IFAC-PapersOnLine).' van: 'Huxol A, Villmer FJ. DoE Methods for Parameter Evaluation in Selective Laser Melting. 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS). Amsterdam [u.a.]: Elsevier BV; 2019. (IFAC-PapersOnLine; vol. 52).' conference: end_date: 2019-08-14 location: Oshawa, CANADA name: 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS) start_date: 2019-08-12 date_created: 2025-04-15T09:27:00Z date_updated: 2025-06-26T13:40:48Z department: - _id: DEP7000 doi: 10.1016/j.ifacol.2019.10.041 intvolume: ' 52' keyword: - Additive manufacturing - quality control - process qualification - process control - screening design language: - iso: eng page: 270-275 place: Amsterdam [u.a.] publication: 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS) publication_identifier: issn: - 2405-8963 publication_status: published publisher: Elsevier BV series_title: IFAC-PapersOnLine status: public title: DoE Methods for Parameter Evaluation in Selective Laser Melting type: conference_editor_article user_id: '83781' volume: 52 year: '2019' ... --- _id: '12792' abstract: - lang: eng text: Additive Manufacturing has arisen as a ground-breaking set of technologies that, thanks to their capability of continuous improvements in performance and cost-efficiency, was able in the last years to replace well-established manufacturing processes. Proficiency in the fabrication of highly complex parts forced this astonishing development. This research is based on the idea that through the integration of additive and conventional manufacturing technologies it is possible to achieve great cost and operational benefits especially in the field of tool making for injection molding. Such an integrated manufacturing solution could overcome the limitations of independent additive, subtractive, and post-processing procedures by strengthening their potentialities. The present study highlights the opportunities of a synergy between the above-mentioned manufacturing technologies for the optimized fabrication of injection molds. An additive manufacturing process chain is presented, and special attention is given to the surface quality and its optimization directly in the Selective Laser Melting process. The potentialities of the Laser Surface Re-melting technique are analyzed, and the process optimization leads to a reduction of 45% of the average roughness directly in the SLM process. (C) 2019, IFAC (International Federation of Automatic Control) Hosting by Elsevier Ltd. All rights reserved. author: - first_name: Filippo full_name: Simoni, Filippo last_name: Simoni - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: Simoni F, Huxol A, Villmer FJ. Approach Towards Surface Improvement in Additively Manufactured Tools. Vol 52. Elsevier BV; 2019:254-259. doi:10.1016/j.ifacol.2019.10.032 apa: Simoni, F., Huxol, A., & Villmer, F.-J. (2019). Approach Towards Surface Improvement in Additively Manufactured Tools. In 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS) (Vol. 52, pp. 254–259). Elsevier BV. https://doi.org/10.1016/j.ifacol.2019.10.032 bjps: 'Simoni F, Huxol A and Villmer F-J (2019) Approach Towards Surface Improvement in Additively Manufactured Tools. Amsterdam [u.a.]: Elsevier BV.' chicago: 'Simoni, Filippo, Andrea Huxol, and Franz-Josef Villmer. Approach Towards Surface Improvement in Additively Manufactured Tools. 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS). Vol. 52. IFAC-PapersOnLine. Amsterdam [u.a.]: Elsevier BV, 2019. https://doi.org/10.1016/j.ifacol.2019.10.032.' chicago-de: 'Simoni, Filippo, Andrea Huxol und Franz-Josef Villmer. 2019. Approach Towards Surface Improvement in Additively Manufactured Tools. 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS). Bd. 52. IFAC-PapersOnLine. Amsterdam [u.a.]: Elsevier BV. doi:10.1016/j.ifacol.2019.10.032, .' din1505-2-1: 'Simoni, Filippo ; Huxol, Andrea ; Villmer, Franz-Josef: Approach Towards Surface Improvement in Additively Manufactured Tools, IFAC-PapersOnLine. Bd. 52. Amsterdam [u.a.] : Elsevier BV, 2019' havard: F. Simoni, A. Huxol, F.-J. Villmer, Approach Towards Surface Improvement in Additively Manufactured Tools, Elsevier BV, Amsterdam [u.a.], 2019. ieee: 'F. Simoni, A. Huxol, and F.-J. Villmer, Approach Towards Surface Improvement in Additively Manufactured Tools, vol. 52. Amsterdam [u.a.]: Elsevier BV, 2019, pp. 254–259. doi: 10.1016/j.ifacol.2019.10.032.' mla: Simoni, Filippo, et al. “Approach Towards Surface Improvement in Additively Manufactured Tools.” 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS), vol. 52, Elsevier BV, 2019, pp. 254–59, https://doi.org/10.1016/j.ifacol.2019.10.032. short: F. Simoni, A. Huxol, F.-J. Villmer, Approach Towards Surface Improvement in Additively Manufactured Tools, Elsevier BV, Amsterdam [u.a.], 2019. ufg: 'Simoni, Filippo/Huxol, Andrea/Villmer, Franz-Josef: Approach Towards Surface Improvement in Additively Manufactured Tools, Bd. 52, Amsterdam [u.a.] 2019 (IFAC-PapersOnLine).' van: 'Simoni F, Huxol A, Villmer FJ. Approach Towards Surface Improvement in Additively Manufactured Tools. 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS). Amsterdam [u.a.]: Elsevier BV; 2019. (IFAC-PapersOnLine; vol. 52).' conference: end_date: 2019-08-14 location: Oshawa, CANADA name: 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS) start_date: 2019-08-12 date_created: 2025-04-15T09:32:02Z date_updated: 2025-06-26T13:40:36Z department: - _id: DEP7000 doi: 10.1016/j.ifacol.2019.10.032 intvolume: ' 52' keyword: - Direct rapid tooling - toolmaking - additive manufacturing process chain - process control - production systems - selective laser melting - surface roughness - laser surface re-melting language: - iso: eng page: 254-259 place: Amsterdam [u.a.] publication: 13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS) publication_identifier: issn: - 2405-8963 publication_status: published publisher: Elsevier BV series_title: IFAC-PapersOnLine status: public title: Approach Towards Surface Improvement in Additively Manufactured Tools type: conference_editor_article user_id: '83781' volume: 52 year: '2019' ... --- _id: '11134' author: - first_name: Oliver full_name: Stübbe, Oliver id: '51864' last_name: Stübbe orcid: https://orcid.org/0000-0001-7293-6893 - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: Stübbe O, Huxol A, Villmer FJ. Applying Fused Layer Modeling Technologies to Print Embedded 3D Optical Waveguide Structures for Communication and Sensor Applications. Vol 10675. (von Freymann G, Herkommer AM, Flury M, eds.). SPIE; 2018. doi:10.1117/12.2306910 apa: Stübbe, O., Huxol, A., & Villmer, F.-J. (2018). Applying fused layer modeling technologies to print embedded 3D optical waveguide structures for communication and sensor applications. In G. von Freymann, A. M. Herkommer, & M. Flury (Eds.), 3D Printed Optics and Additive Photonic Manufacturing (Vol. 10675). SPIE. https://doi.org/10.1117/12.2306910 bjps: Stübbe O, Huxol A and Villmer F-J (2018) Applying Fused Layer Modeling Technologies to Print Embedded 3D Optical Waveguide Structures for Communication and Sensor Applications, von Freymann G, Herkommer AM and Flury M (eds). SPIE. chicago: Stübbe, Oliver, Andrea Huxol, and Franz-Josef Villmer. Applying Fused Layer Modeling Technologies to Print Embedded 3D Optical Waveguide Structures for Communication and Sensor Applications. Edited by Georg von Freymann, Alois M. Herkommer, and Manuel Flury. 3D Printed Optics and Additive Photonic Manufacturing. Vol. 10675. Proceedings of SPIE. SPIE, 2018. https://doi.org/10.1117/12.2306910. chicago-de: Stübbe, Oliver, Andrea Huxol und Franz-Josef Villmer. 2018. Applying fused layer modeling technologies to print embedded 3D optical waveguide structures for communication and sensor applications. Hg. von Georg von Freymann, Alois M. Herkommer, und Manuel Flury. 3D Printed Optics and Additive Photonic Manufacturing. Bd. 10675. Proceedings of SPIE. SPIE. doi:10.1117/12.2306910, . din1505-2-1: 'Stübbe, Oliver ; Huxol, Andrea ; Villmer, Franz-Josef ; von Freymann, G. ; Herkommer, A. M. ; Flury, M. (Hrsg.): Applying fused layer modeling technologies to print embedded 3D optical waveguide structures for communication and sensor applications, Proceedings of SPIE. Bd. 10675 : SPIE, 2018' havard: O. Stübbe, A. Huxol, F.-J. Villmer, Applying fused layer modeling technologies to print embedded 3D optical waveguide structures for communication and sensor applications, SPIE, 2018. ieee: 'O. Stübbe, A. Huxol, and F.-J. Villmer, Applying fused layer modeling technologies to print embedded 3D optical waveguide structures for communication and sensor applications, vol. 10675. SPIE, 2018. doi: 10.1117/12.2306910.' mla: Stübbe, Oliver, et al. “Applying Fused Layer Modeling Technologies to Print Embedded 3D Optical Waveguide Structures for Communication and Sensor Applications.” 3D Printed Optics and Additive Photonic Manufacturing, edited by Georg von Freymann et al., vol. 10675, SPIE, 2018, https://doi.org/10.1117/12.2306910. short: O. Stübbe, A. Huxol, F.-J. Villmer, Applying Fused Layer Modeling Technologies to Print Embedded 3D Optical Waveguide Structures for Communication and Sensor Applications, SPIE, 2018. ufg: 'Stübbe, Oliver/Huxol, Andrea/Villmer, Franz-Josef: Applying fused layer modeling technologies to print embedded 3D optical waveguide structures for communication and sensor applications, Bd. 10675, hg. von Freymann, Georg von/Herkommer, Alois M./Flury, Manuel, o. O. 2018 (Proceedings of SPIE).' van: Stübbe O, Huxol A, Villmer FJ. Applying fused layer modeling technologies to print embedded 3D optical waveguide structures for communication and sensor applications. von Freymann G, Herkommer AM, Flury M, editors. 3D Printed Optics and Additive Photonic Manufacturing. SPIE; 2018. (Proceedings of SPIE; vol. 10675). conference: end_date: 2018-04-26 location: Strasbourg, France name: SPIE Photonics Europe start_date: 2018-04-22 date_created: 2024-02-29T17:21:32Z date_updated: 2024-04-19T11:49:25Z department: - _id: DEP5020 - _id: DEP6020 doi: 10.1117/12.2306910 editor: - first_name: Georg full_name: von Freymann, Georg last_name: von Freymann - first_name: Alois M. full_name: Herkommer, Alois M. last_name: Herkommer - first_name: Manuel full_name: Flury, Manuel last_name: Flury intvolume: ' 10675' language: - iso: eng publication: 3D Printed Optics and Additive Photonic Manufacturing publication_identifier: eisbn: - 978-1-5106-1877-0 eissn: - 1996-756X issn: - 0277-786X unknown: - 978-1-5106-1876-3 publication_status: published publisher: SPIE series_title: Proceedings of SPIE status: public title: Applying fused layer modeling technologies to print embedded 3D optical waveguide structures for communication and sensor applications type: conference_editor_article user_id: '51864' volume: 10675 year: '2018' ... --- _id: '550' abstract: - lang: eng text: Additive Manufacturing (AM) technologies are increasingly used for final part production. Especially technologies for processing of metal, like Selective LaserMelting (SLM), arefocusedin this area. The shift from prototyping towards final part production results in enhanced requirements for repeatability and predictability of the part quality. Machine manufacturers offer process monitoring solutions for different aspects of the production process, like the powder bed surface, the melt pool, and the laser energy. Nevertheless, the significance of these systems is not fully proven and threshold values for the monitored process parameters have to be determined for each product individually. This impedes the development of suitable process control systems. The paper gives an overview ofexistingresearch approaches and available process monitoring systems for SLM and their applicability for predicting certain part characteristics. The existing solutions are evaluated based on own research results. Next, AM specific difficulties for the development of process control tools and possible solutions are discussed. author: - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: 'Huxol A, Villmer F-J. Process Control for Selective Laser Melting - Opprtunities and Limitations. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2018:17-28.' apa: Huxol, A., & Villmer, F.-J. (2018). Process Control for Selective Laser Melting - Opprtunities and Limitations. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 17–28). Lemgo. bjps: Huxol A and Villmer F-J (2018) Process Control for Selective Laser Melting - Opprtunities and Limitations. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 17–28. chicago: Huxol, Andrea, and Franz-Josef Villmer. “Process Control for Selective Laser Melting - Opprtunities and Limitations.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 17–28. Lemgo, 2018. chicago-de: 'Huxol, Andrea und Franz-Josef Villmer. 2018. Process Control for Selective Laser Melting - Opprtunities and Limitations. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 17–28. Lemgo.' din1505-2-1: 'Huxol, Andrea ; Villmer, Franz-Josef: Process Control for Selective Laser Melting - Opprtunities and Limitations. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2018, S. 17–28' havard: 'A. Huxol, F.-J. Villmer, Process Control for Selective Laser Melting - Opprtunities and Limitations, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp. 17–28.' ieee: A. Huxol and F.-J. Villmer, “Process Control for Selective Laser Melting - Opprtunities and Limitations,” in Production Engineering and Management, Lemgo, 2018, no. 1, pp. 17–28. mla: Huxol, Andrea, and Franz-Josef Villmer. “Process Control for Selective Laser Melting - Opprtunities and Limitations.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 17–28. short: 'A. Huxol, F.-J. Villmer, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018, pp. 17–28.' ufg: 'Huxol, Andrea/Villmer, Franz-Josef (2018): Process Control for Selective Laser Melting - Opprtunities and Limitations, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 17–28.' van: 'Huxol A, Villmer F-J. Process Control for Selective Laser Melting - Opprtunities and Limitations. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2018. p. 17–28.' conference: end_date: 2018-10-05 location: Lemgo name: Proceedings 8th International Conference start_date: 2018-10-04 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-13T13:55:29Z date_updated: 2023-03-15T13:50:00Z department: - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Additive manufacturing - Process capability - Process monitoring - Quality assurance - Final part production language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf oa: '1' page: 17-28 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-946856-03-0 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf status: public title: Process Control for Selective Laser Melting - Opprtunities and Limitations type: conference user_id: '45673' year: 2018 ... --- _id: '552' abstract: - lang: eng text: 'Since additive manufacturing (AM) is continuously growing, the influence of processing conditions and setup parameters on microstructural and mechanical properties of additively manufacturedcomponents needs to be clarified. The paper discusses an experimental approach for the identification of influencing parameters in Selective Laser Melting; this consists of an evaluation of the mechanical and physical properties of final parts, depending on the chosen process parameters. The Design of Experiments is used to get valid results from a limited number of experiments. The research work focuses on the application of a Definitive Screening Design to identify the most important influencing parameters: Several parameters of the hatch and the contour exposure are varied, as well as the position and orientation of the samples in the build chamber. A maraging steel and a CoCr alloy are used, and the mechanical and physical properties of the samples are evaluated. The interdependencies between the variation of the factors and the observed properties are analyzed.' author: - first_name: F. full_name: Simoni, F. last_name: Simoni - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: 'Simoni F, Huxol A, Villmer F-J. Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2018:43-55.' apa: Simoni, F., Huxol, A., & Villmer, F.-J. (2018). Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 43–55). Lemgo. bjps: Simoni F, Huxol A and Villmer F-J (2018) Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 43–55. chicago: Simoni, F., Andrea Huxol, and Franz-Josef Villmer. “Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 43–55. Lemgo, 2018. chicago-de: 'Simoni, F., Andrea Huxol und Franz-Josef Villmer. 2018. Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 43–55. Lemgo.' din1505-2-1: 'Simoni, F. ; Huxol, Andrea ; Villmer, Franz-Josef: Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2018, S. 43–55' havard: 'F. Simoni, A. Huxol, F.-J. Villmer, Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp. 43–55.' ieee: F. Simoni, A. Huxol, and F.-J. Villmer, “Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts,” in Production Engineering and Management, Lemgo, 2018, no. 1, pp. 43–55. mla: Simoni, F., et al. “Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 43–55. short: 'F. Simoni, A. Huxol, F.-J. Villmer, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018, pp. 43–55.' ufg: 'Simoni, F. et. al. (2018): Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 43–55.' van: 'Simoni F, Huxol A, Villmer F-J. Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2018. p. 43–55.' conference: end_date: 2018-10-05 location: Lemgo name: Proceedings 8th International Conference start_date: 2018-10-04 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-13T14:11:15Z date_updated: 2023-03-15T13:50:00Z department: - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Additive manufacturing - Process parameters - Design of Experiments - Density measurement language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf oa: '1' page: 43-55 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-946856-03-0 publication_status: published status: public title: Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts type: conference user_id: '45673' year: 2018 ... --- _id: '553' abstract: - lang: eng text: Selective laser melting is a powder bed fusion technology that uses a laser as an energy source in order to directly build fullydensemetal parts. Optimal fabrication requires a comprehensiveunderstanding of the main processing,as it affectsthe part quality. Wherefore, the objective of this paper is to perform a survey, data checking and collecting ofprovided parameters to compare and contextualize it versus the respective values used in the processby the research studies. The work is focused on cobalt-chromium alloys (CoCr) which are widely used in dental and medical applications. This work focusesonsurfacequality and hardness as built and after the post-processes. As well, the approaches in bond strength after post-processing are considered, comparing the results made by different manufacturing techniques. Finally, this work compares results acquired in surface roughness asbuilt, and tensile strength of parts made by selective laser melting versus the traditional technique cast, before and after heat treatment. author: - first_name: Joyce full_name: Silva Gimenes Gandara, Joyce id: '70765' last_name: Silva Gimenes Gandara - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: 'Silva Gimenes Gandara J, Huxol A, Villmer F-J. Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2018:57-69.' apa: 'Silva Gimenes Gandara, J., Huxol, A., & Villmer, F.-J. (2018). Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 57–69). Lemgo.' bjps: 'Silva Gimenes Gandara J, Huxol A and Villmer F-J (2018) Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 57–69.' chicago: 'Silva Gimenes Gandara, Joyce, Andrea Huxol, and Franz-Josef Villmer. “Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 57–69. Lemgo, 2018.' chicago-de: 'Silva Gimenes Gandara, Joyce, Andrea Huxol und Franz-Josef Villmer. 2018. Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 57–69. Lemgo.' din1505-2-1: 'Silva Gimenes Gandara, Joyce ; Huxol, Andrea ; Villmer, Franz-Josef: Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2018, S. 57–69' havard: 'J. Silva Gimenes Gandara, A. Huxol, F.-J. Villmer, Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018: pp. 57–69.' ieee: 'J. Silva Gimenes Gandara, A. Huxol, and F.-J. Villmer, “Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results,” in Production Engineering and Management, 2018, no. 1, pp. 57–69.' mla: 'Silva Gimenes Gandara, Joyce, et al. “Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2018, pp. 57–69.' short: 'J. Silva Gimenes Gandara, A. Huxol, F.-J. Villmer, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2018, pp. 57–69.' ufg: 'Silva Gimenes Gandara, Joyce et. al. (2018): Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 57–69.' van: 'Silva Gimenes Gandara J, Huxol A, Villmer F-J. Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2018. p. 57–69.' conference: end_date: 2018-10-05 name: Proceedings 8th International Conference start_date: 2018-10-04 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-13T14:20:54Z date_updated: 2023-03-15T13:50:00Z department: - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Additive manufacturing - Material properties - Part properties - Process parameters language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf oa: '1' page: 57-69 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-946856-03-0 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM2018_proceedings_web.pdf status: public title: 'Selective Laser Melting - CoCr Approach: Analysis of Manufacturer Parameters Versus Research Results' type: conference user_id: '45673' year: 2018 ... --- _id: '570' abstract: - lang: eng text: Additive manufacturing (AM) has matured rapidly during the last years due to the advancement of AM machines and materials. Nevertheless, the widespread adoption of AM is still challenged by producing parts with reliable quality. The aim of this paper is t o introduce a first approach to apply in-situ monitoring for quality evaluation of produced parts. Based on the monitored data, a model is developed, in order to predict the quality of ready built parts. author: - first_name: Eva full_name: Scheideler, Eva id: '61522' last_name: Scheideler - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: 'Scheideler E, Huxol A, Villmer F-J. Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineeringand Management. Publication series in direct digital manufacturing . Lemgo; 2017:89-100.' apa: Scheideler, E., Huxol, A., & Villmer, F.-J. (2017). Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineeringand Management (pp. 89–100). Lemgo. bjps: Scheideler E, Huxol A and Villmer F-J (2017) Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineeringand Management. Lemgo, pp. 89–100. chicago: Scheideler, Eva, Andrea Huxol, and Franz-Josef Villmer. “Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models.” In Production Engineeringand Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 89–100. Publication Series in Direct Digital Manufacturing . Lemgo, 2017. chicago-de: 'Scheideler, Eva, Andrea Huxol und Franz-Josef Villmer. 2017. Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In: Production Engineeringand Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 89–100. Publication series in direct digital manufacturing . Lemgo.' din1505-2-1: 'Scheideler, Eva ; Huxol, Andrea ; Villmer, Franz-Josef: Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineeringand Management, Publication series in direct digital manufacturing . Lemgo, 2017, S. 89–100' havard: 'E. Scheideler, A. Huxol, F.-J. Villmer, Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineeringand Management, Lemgo, 2017: pp. 89–100.' ieee: E. Scheideler, A. Huxol, and F.-J. Villmer, “Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models,” in Production Engineeringand Management, Pordenone, Italy, 2017, no. 1, pp. 89–100. mla: Scheideler, Eva, et al. “Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models.” Production Engineeringand Management, edited by Elio Padoano et al., no. 1, 2017, pp. 89–100. short: 'E. Scheideler, A. Huxol, F.-J. Villmer, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineeringand Management, Lemgo, 2017, pp. 89–100.' ufg: 'Scheideler, Eva et. al. (2017): Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models, in: Elio Padoano et. al. (Hgg.): Production Engineeringand Management (=Publication series in direct digital manufacturing ), Lemgo, S. 89–100.' van: 'Scheideler E, Huxol A, Villmer F-J. Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineeringand Management. Lemgo; 2017. p. 89–100. (Publication series in direct digital manufacturing ).' conference: end_date: 2017-09-29 location: Pordenone, Italy name: Proceedings7th International Conference start_date: 2017-09-28 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T09:46:43Z date_updated: 2023-03-15T13:50:01Z department: - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer issue: '1' keyword: - Nondestructive quality control - Predictive analytics - Metal model - Additive manufacturing language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf oa: '1' page: 89-100 place: Lemgo publication: Production Engineeringand Management publication_identifier: isbn: - 978-3-946856-01-6 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf series_title: 'Publication series in direct digital manufacturing ' status: public title: Nondestructive Quality Check of Additive Manufactured Parts Using Empirical Models type: conference user_id: '45673' year: 2017 ... --- _id: '577' abstract: - lang: eng text: A rising number of product variants together with decreasing lot sizes are a result of the trend of individualization. Besides the upcoming organizational issues, changes in the production technologies are required. Direct digital manufacturing contributes to solve this problem by enabling the production of parts right from the CAD data.Process capability analysis is applied in several industries to prove the reliable compliance of products with quality requirements. As it is based on statistical methods, new challenges arise in the context of single-part production.The paper describes and compares different approaches for the adoption of process capability analysis for single-part production with special focus on additive manufacturing technologies. The statistical background and the applicability of different capability parameters are discussed. An overview of existing research work is given and supplemented by own approaches for the adoption of statistical methods for single-part production. The aim of the research work is to establish a first approach for the qualification of new technologies in single-part production. author: - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Andrea full_name: Davis, Andrea id: '68611' last_name: Davis - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer - first_name: Eva full_name: Scheideler, Eva id: '61522' last_name: Scheideler citation: ama: 'Huxol A, Davis A, Villmer F-J, Scheideler E. Deployment of Process Capability Analysis for Single-Part Production. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Publication series in direct digital manufacturing . Lemgo; 2017:63-74.' apa: Huxol, A., Davis, A., Villmer, F.-J., & Scheideler, E. (2017). Deployment of Process Capability Analysis for Single-Part Production. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 63–74). Lemgo. bjps: Huxol A et al. (2017) Deployment of Process Capability Analysis for Single-Part Production. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 63–74. chicago: Huxol, Andrea, Andrea Davis, Franz-Josef Villmer, and Eva Scheideler. “Deployment of Process Capability Analysis for Single-Part Production.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 63–74. Publication Series in Direct Digital Manufacturing . Lemgo, 2017. chicago-de: 'Huxol, Andrea, Andrea Davis, Franz-Josef Villmer und Eva Scheideler. 2017. Deployment of Process Capability Analysis for Single-Part Production. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 63–74. Publication series in direct digital manufacturing . Lemgo.' din1505-2-1: 'Huxol, Andrea ; Davis, Andrea ; Villmer, Franz-Josef ; Scheideler, Eva: Deployment of Process Capability Analysis for Single-Part Production. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management, Publication series in direct digital manufacturing . Lemgo, 2017, S. 63–74' havard: 'A. Huxol, A. Davis, F.-J. Villmer, E. Scheideler, Deployment of Process Capability Analysis for Single-Part Production, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017: pp. 63–74.' ieee: A. Huxol, A. Davis, F.-J. Villmer, and E. Scheideler, “Deployment of Process Capability Analysis for Single-Part Production,” in Production Engineering and Management, Pordenone, Italy, 2017, no. 1, pp. 63–74. mla: Huxol, Andrea, et al. “Deployment of Process Capability Analysis for Single-Part Production.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2017, pp. 63–74. short: 'A. Huxol, A. Davis, F.-J. Villmer, E. Scheideler, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017, pp. 63–74.' ufg: 'Huxol, Andrea et. al. (2017): Deployment of Process Capability Analysis for Single-Part Production, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management (=Publication series in direct digital manufacturing ), Lemgo, S. 63–74.' van: 'Huxol A, Davis A, Villmer F-J, Scheideler E. Deployment of Process Capability Analysis for Single-Part Production. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2017. p. 63–74. (Publication series in direct digital manufacturing ).' conference: end_date: 2017-09-29 location: Pordenone, Italy name: Proceedings7th International Conference start_date: 2017-09-28 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T11:16:07Z date_updated: 2023-03-15T13:50:01Z department: - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer issue: '1' keyword: - Statistical process control - Process capability analysis - Single-part production - Process optimization language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf oa: '1' page: 63-74 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-946856-01-6 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf series_title: 'Publication series in direct digital manufacturing ' status: public title: Deployment of Process Capability Analysis for Single-Part Production type: conference user_id: '45673' year: 2017 ... --- _id: '579' abstract: - lang: eng text: Selective Laser Melting (SLM) is a powder bed fusion process to produce additively metal parts. From the current point of view, it seems to be one of the most promising additive manufacturing technologies for the production of end use parts. An increasing number of examples prove the successful application of SLM for technical part production. Nevertheless, they also show the enormous effort that is still required to qualify the production process of every single part individually.The present paper gives an overview of the major influencing factors of the SLM process. To get a comprehensive research approach, existing publications on the topic are taken into account as well as own experimental work, evaluating the effects of the process parameters on the relative density of samples made from tool steel. The experimental setup and the results are described and opportunities for the further research work are discussed. author: - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Eva full_name: Scheideler, Eva id: '61522' last_name: Scheideler - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: 'Huxol A, Scheideler E, Villmer F-J. Influencing Factors on Part Quality in Selective Laser Melting. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2017:13-34.' apa: Huxol, A., Scheideler, E., & Villmer, F.-J. (2017). Influencing Factors on Part Quality in Selective Laser Melting. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 13–34). Lemgo. bjps: Huxol A, Scheideler E and Villmer F-J (2017) Influencing Factors on Part Quality in Selective Laser Melting. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 13–34. chicago: Huxol, Andrea, Eva Scheideler, and Franz-Josef Villmer. “Influencing Factors on Part Quality in Selective Laser Melting.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 13–34. Lemgo, 2017. chicago-de: 'Huxol, Andrea, Eva Scheideler und Franz-Josef Villmer. 2017. Influencing Factors on Part Quality in Selective Laser Melting. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 13–34. Lemgo.' din1505-2-1: 'Huxol, Andrea ; Scheideler, Eva ; Villmer, Franz-Josef: Influencing Factors on Part Quality in Selective Laser Melting. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2017, S. 13–34' havard: 'A. Huxol, E. Scheideler, F.-J. Villmer, Influencing Factors on Part Quality in Selective Laser Melting, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017: pp. 13–34.' ieee: A. Huxol, E. Scheideler, and F.-J. Villmer, “Influencing Factors on Part Quality in Selective Laser Melting,” in Production Engineering and Management, Pordenone, Italy, 2017, no. 1, pp. 13–34. mla: Huxol, Andrea, et al. “Influencing Factors on Part Quality in Selective Laser Melting.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2017, pp. 13–34. short: 'A. Huxol, E. Scheideler, F.-J. Villmer, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2017, pp. 13–34.' ufg: 'Huxol, Andrea et. al. (2017): Influencing Factors on Part Quality in Selective Laser Melting, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 13–34.' van: 'Huxol A, Scheideler E, Villmer F-J. Influencing Factors on Part Quality in Selective Laser Melting. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2017. p. 13–34.' conference: end_date: 2017-09-29 location: Pordenone, Italy name: Proceedings 7th International Conference start_date: 2017-09-28 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T11:34:36Z date_updated: 2023-03-15T13:50:02Z department: - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer issue: '1' keyword: - Selective laser melting - Additive manufacturing - Process parameters - Process optimization language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf oa: '1' page: 13-34 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-946856-01-6 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2017_Proceeding_web.pdf status: public title: Influencing Factors on Part Quality in Selective Laser Melting type: conference user_id: '45673' year: 2017 ... --- _id: '473' abstract: - lang: eng text: "Additive Manufacturing (AM) describes a number of technologies that generate three-dimensional objects directly from CAD data by joining volume elements. Dental technology is one sector in which the benefits of AM come into effect, as parts such as frameworks or implants are unique objects often with freeform shapes. These objects are difficult and expensive to produce with subtractive or formative technology.\r\nDuring the last decades, the application of digital technologies in the dental industry has increased. Therefore AM has also evolved to become a standard dental framework manufacturing process. While previously the dental laboratory did the complete manufacturing of dental frameworks, AM parts are usually produced by service providers, thus increasing the number of process participants. Under these circumstances, a reliable high quality production must be ensured. This requires a comprehensive Quality Management (QM) concept for the whole process chain. A first step in the evelopment of this QM concept is the definition of the product requirements, from which process specifications can be determined. These specifications build the basis for evaluating the process capability of the Additive Manufacturing process." author: - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: 'Huxol A, Villmer F-J. Special Requirements for Additive Manufacturing of Dental Frameworks. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, eds. Production Engineering and Management. ; 2016:15-26.' apa: Huxol, A., & Villmer, F.-J. (2016). Special Requirements for Additive Manufacturing of Dental Frameworks. In F.-J. Villmer, E. Padoano, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 15–26). Lemgo. bjps: Huxol A and Villmer F-J (2016) Special Requirements for Additive Manufacturing of Dental Frameworks. In Villmer F-J, Padoano E and Department of Production Engineering and Management (eds), Production Engineering and Management. pp. 15–26. chicago: Huxol, Andrea, and Franz-Josef Villmer. “Special Requirements for Additive Manufacturing of Dental Frameworks.” In Production Engineering and Management, edited by Franz-Josef Villmer, Elio Padoano, and Department of Production Engineering and Management, 15–26, 2016. chicago-de: 'Huxol, Andrea und Franz-Josef Villmer. 2016. Special Requirements for Additive Manufacturing of Dental Frameworks. In: Production Engineering and Management, hg. von Franz-Josef Villmer, Elio Padoano, und Department of Production Engineering and Management, 15–26.' din1505-2-1: 'Huxol, Andrea ; Villmer, Franz-Josef: Special Requirements for Additive Manufacturing of Dental Frameworks. In: Villmer, F.-J. ; Padoano, E. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management, 2016, S. 15–26' havard: 'A. Huxol, F.-J. Villmer, Special Requirements for Additive Manufacturing of Dental Frameworks, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, 2016: pp. 15–26.' ieee: A. Huxol and F.-J. Villmer, “Special Requirements for Additive Manufacturing of Dental Frameworks,” in Production Engineering and Management, Lemgo, 2016, no. 1, pp. 15–26. mla: Huxol, Andrea, and Franz-Josef Villmer. “Special Requirements for Additive Manufacturing of Dental Frameworks.” Production Engineering and Management, edited by Franz-Josef Villmer et al., no. 1, 2016, pp. 15–26. short: 'A. Huxol, F.-J. Villmer, in: F.-J. Villmer, E. Padoano, Department of Production Engineering and Management (Eds.), Production Engineering and Management, 2016, pp. 15–26.' ufg: 'Huxol, Andrea/Villmer, Franz-Josef (2016): Special Requirements for Additive Manufacturing of Dental Frameworks, in: Franz-Josef Villmer et. al. (Hgg.): Production Engineering and Management, S. 15–26.' van: 'Huxol A, Villmer F-J. Special Requirements for Additive Manufacturing of Dental Frameworks. In: Villmer F-J, Padoano E, Department of Production Engineering and Management, editors. Production Engineering and Management. 2016. p. 15–26.' conference: end_date: 2016-09-30 location: Lemgo name: Proceedings 6th International Conference start_date: 2016-09-29 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-01-29T13:37:02Z date_updated: 2023-03-15T13:49:55Z department: - _id: DEP1306 editor: - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer - first_name: Elio full_name: Padoano, Elio last_name: Padoano issue: '1' keyword: - Additive Manufacturing - Dental frameworks - Quality management - Digital manufacturing language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf oa: '1' page: 15-26 publication: Production Engineering and Management publication_identifier: unknown: - 978-3-946856-00-9 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf status: public title: Special Requirements for Additive Manufacturing of Dental Frameworks type: conference user_id: '45673' year: 2016 ... --- _id: '3781' author: - first_name: Kerstin full_name: Dekomien, Kerstin id: '11293' last_name: Dekomien - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Adrian full_name: Riegel, Adrian id: '14647' last_name: Riegel citation: ama: Dekomien K, Huxol A, Riegel A. Sensorische und messtechnische Gütebestimmung von rohen und beschichteten Holz- und Holzwerkstoffoberflächen. Holztechnologie. 2016;56(3):28-34. apa: Dekomien, K., Huxol, A., & Riegel, A. (2016). Sensorische und messtechnische Gütebestimmung von rohen und beschichteten Holz- und Holzwerkstoffoberflächen. Holztechnologie, 56(3), 28–34. bjps: Dekomien K, Huxol A and Riegel A (2016) Sensorische und messtechnische Gütebestimmung von rohen und beschichteten Holz- und Holzwerkstoffoberflächen. Holztechnologie 56, 28–34. chicago: 'Dekomien, Kerstin, Andrea Huxol, and Adrian Riegel. “Sensorische und messtechnische Gütebestimmung von rohen und beschichteten Holz- und Holzwerkstoffoberflächen.” Holztechnologie 56, no. 3 (2016): 28–34.' chicago-de: 'Dekomien, Kerstin, Andrea Huxol und Adrian Riegel. 2016. Sensorische und messtechnische Gütebestimmung von rohen und beschichteten Holz- und Holzwerkstoffoberflächen. Holztechnologie 56, Nr. 3: 28–34.' din1505-2-1: 'Dekomien, Kerstin ; Huxol, Andrea ; Riegel, Adrian: Sensorische und messtechnische Gütebestimmung von rohen und beschichteten Holz- und Holzwerkstoffoberflächen. In: Holztechnologie Bd. 56. Dresden, Institut für Holztechnologie (2016), Nr. 3, S. 28–34' havard: K. Dekomien, A. Huxol, A. Riegel, Sensorische und messtechnische Gütebestimmung von rohen und beschichteten Holz- und Holzwerkstoffoberflächen, Holztechnologie. 56 (2016) 28–34. ieee: K. Dekomien, A. Huxol, and A. Riegel, “Sensorische und messtechnische Gütebestimmung von rohen und beschichteten Holz- und Holzwerkstoffoberflächen,” Holztechnologie, vol. 56, no. 3, pp. 28–34, 2016. mla: Dekomien, Kerstin, et al. “Sensorische und messtechnische Gütebestimmung von rohen und beschichteten Holz- und Holzwerkstoffoberflächen.” Holztechnologie, vol. 56, no. 3, Institut für Holztechnologie, 2016, pp. 28–34. short: K. Dekomien, A. Huxol, A. Riegel, Holztechnologie 56 (2016) 28–34. ufg: 'Dekomien, Kerstin et. al. (2016): Sensorische und messtechnische Gütebestimmung von rohen und beschichteten Holz- und Holzwerkstoffoberflächen, in: Holztechnologie 56 (3), S. 28–34.' van: Dekomien K, Huxol A, Riegel A. Sensorische und messtechnische Gütebestimmung von rohen und beschichteten Holz- und Holzwerkstoffoberflächen. Holztechnologie. 2016;56(3):28–34. date_created: 2020-11-03T09:07:22Z date_updated: 2023-03-15T13:49:48Z ddc: - '670' file: - access_level: local content_type: application/pdf creator: czr-e2t date_created: 2020-11-03T09:14:22Z date_updated: 2020-11-03T09:14:22Z file_id: '3782' file_name: riegel_sensorische.pdf file_size: 1595989 relation: main_file file_date_updated: 2020-11-03T09:14:22Z has_accepted_license: '1' intvolume: ' 56' issue: '3' language: - iso: ger page: 28 - 34 place: Dresden publication: Holztechnologie publication_identifier: issn: - 0018-3881 publication_status: published publisher: Institut für Holztechnologie status: public title: Sensorische und messtechnische Gütebestimmung von rohen und beschichteten Holz- und Holzwerkstoffoberflächen type: journal_article user_id: '74004' volume: 56 year: 2016 ... --- _id: '588' abstract: - lang: eng text: "While common measurement techniques like gloss or color measurement are widely used in industry for quality assessment of furniture high gloss surfaces, they indicate only a weak correlation to the quality perceived by the customer. Topography based approaches achieve higher correlation to human perception but are often based on linear measurement which cannot be applied for an overall assessment of larger surfaces. Thus an algorithm was developed to calculate a specific value based on topographic features, such as orange peel, within the research project ‘Development of a comprehensive quality concept for furniture high gloss surfaces’, funded by the federal Ministry of Education and Research. For the evaluation of short waved structures on furniture high gloss surfaces the ratio of hill height to hill area was chosen. This parameter proves to be applicable for an evaluation of the extent of a single.\r\n" author: - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Adrian full_name: Riegel, Adrian id: '14647' last_name: Riegel - first_name: Kerstin full_name: Dekomien, Kerstin id: '59843' last_name: Dekomien citation: ama: 'Huxol A, Riegel A, Dekomien K. Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2015:99-110.' apa: Huxol, A., Riegel, A., & Dekomien, K. (2015). Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 99–110). Lemgo. bjps: Huxol A, Riegel A and Dekomien K (2015) Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 99–110. chicago: Huxol, Andrea, Adrian Riegel, and Kerstin Dekomien. “Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 99–110. Lemgo, 2015. chicago-de: 'Huxol, Andrea, Adrian Riegel und Kerstin Dekomien. 2015. Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 99–110. Lemgo.' din1505-2-1: 'Huxol, Andrea ; Riegel, Adrian ; Dekomien, Kerstin: Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2015, S. 99–110' havard: 'A. Huxol, A. Riegel, K. Dekomien, Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2015: pp. 99–110.' ieee: A. Huxol, A. Riegel, and K. Dekomien, “Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception,” in Production Engineering and Management, Trieste, Italy, 2015, no. 1, pp. 99–110. mla: Huxol, Andrea, et al. “Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2015, pp. 99–110. short: 'A. Huxol, A. Riegel, K. Dekomien, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2015, pp. 99–110.' ufg: 'Huxol, Andrea et. al. (2015): Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 99–110.' van: 'Huxol A, Riegel A, Dekomien K. Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2015. p. 99–110.' conference: end_date: 2015-10-02 location: Trieste, Italy name: Proceedings5th International Conference start_date: 2015-10-01 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-18T15:13:34Z date_updated: 2023-03-15T13:50:02Z department: - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer issue: '1' keyword: - High gloss - surface measurement - topographic features - quality assessment language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf oa: '1' page: 99-110 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-941645-11-0 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf status: public title: Development of an Algorithm for Measuring the Quality of High Gloss Surfaces Correlated to Human Perception type: conference user_id: '45673' year: 2015 ... --- _id: '598' abstract: - lang: eng text: "The aerospace sector is characterized by long product life cycles and a need for lightweight design. Additive manufacturing is a technology that produces parts layer by layer and thus enables the manufacturing of any complex parts at nearly no extra costs. A topology optimization enhances the part’s\r\nperformance for their special purpose. The results are often complex bionic structures that cannot be produced with conventional manufacturing technologies. The paper analyzes how the high potential of this technologycan be applied to aerospace parts. A topology optimization will be conducted for an aircraft part explaining the crucial points and a life cycle analysis examines the achieved sustainable improvements for the aircraft’s life cycle.\r\n" author: - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Franz-Josef full_name: Villmer, Franz-Josef id: '14290' last_name: Villmer citation: ama: 'Huxol A, Villmer F-J. Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, eds. Production Engineering and Management. Lemgo; 2015:207-218.' apa: 'Huxol, A., & Villmer, F.-J. (2015). Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies. In E. Padoano, F.-J. Villmer, & Department of Production Engineering and Management (Eds.), Production Engineering and Management (pp. 207–218). Lemgo.' bjps: 'Huxol A and Villmer F-J (2015) Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies. In Padoano E, Villmer F-J and Department of Production Engineering and Management (eds), Production Engineering and Management. Lemgo, pp. 207–218.' chicago: 'Huxol, Andrea, and Franz-Josef Villmer. “Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies.” In Production Engineering and Management, edited by Elio Padoano, Franz-Josef Villmer, and Department of Production Engineering and Management, 207–18. Lemgo, 2015.' chicago-de: 'Huxol, Andrea und Franz-Josef Villmer. 2015. Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies. In: Production Engineering and Management, hg. von Elio Padoano, Franz-Josef Villmer, und Department of Production Engineering and Management, 207–218. Lemgo.' din1505-2-1: 'Huxol, Andrea ; Villmer, Franz-Josef: Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies. In: Padoano, E. ; Villmer, F.-J. ; Department of Production Engineering and Management (Hrsg.): Production Engineering and Management. Lemgo, 2015, S. 207–218' havard: 'A. Huxol, F.-J. Villmer, Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2015: pp. 207–218.' ieee: 'A. Huxol and F.-J. Villmer, “Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies,” in Production Engineering and Management, Trieste, Italy, 2015, no. 1, pp. 207–218.' mla: 'Huxol, Andrea, and Franz-Josef Villmer. “Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies.” Production Engineering and Management, edited by Elio Padoano et al., no. 1, 2015, pp. 207–18.' short: 'A. Huxol, F.-J. Villmer, in: E. Padoano, F.-J. Villmer, Department of Production Engineering and Management (Eds.), Production Engineering and Management, Lemgo, 2015, pp. 207–218.' ufg: 'Huxol, Andrea/Villmer, Franz-Josef (2015): Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies, in: Elio Padoano et. al. (Hgg.): Production Engineering and Management, Lemgo, S. 207–218.' van: 'Huxol A, Villmer F-J. Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies. In: Padoano E, Villmer F-J, Department of Production Engineering and Management, editors. Production Engineering and Management. Lemgo; 2015. p. 207–18.' conference: end_date: 2015-10-02 location: Trieste, Italy name: Proceedings5th International Conference start_date: 2015-10-01 corporate_editor: - Department of Production Engineering and Management - Hochschule Ostwestfalen-Lippe date_created: 2019-02-19T07:26:35Z date_updated: 2023-03-15T13:50:03Z department: - _id: DEP1306 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer issue: '1' keyword: - Additive manufacturing - topology optimization - aerospace - life cycle costs language: - iso: eng main_file_link: - open_access: '1' url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf oa: '1' page: 207-218 place: Lemgo publication: Production Engineering and Management publication_identifier: isbn: - 978-3-941645-11-0 publication_status: published related_material: link: - relation: contains url: https://www.hs-owl.de/fileadmin/diman/Veroeffentlichungen/PEM_Tagung_zusammen2015.pdf status: public title: 'Hybrid Manufacturing Machines: Combining Additive and Subtractive Manufacturing Technologies' type: conference user_id: '45673' year: 2015 ... --- _id: '3786' author: - first_name: Adrian full_name: Riegel, Adrian id: '14647' last_name: Riegel - first_name: Kerstin full_name: Dekomien, Kerstin id: '11293' last_name: Dekomien - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol citation: ama: 'Riegel A, Dekomien K, Huxol A. Beitrag zur sensorischen Gütebestimmung von rohen und beschichteten Holz- und Holzwerkstoffoberflächen. In: Tagungsband des 16. Holztechnologischen Kolloquiums. Dresden: TU Dresden, Institut für Holz- und Papiertechnik; 2014:76-89.' apa: 'Riegel, A., Dekomien, K., & Huxol, A. (2014). Beitrag zur sensorischen Gütebestimmung von rohen und beschichteten Holz- und Holzwerkstoffoberflächen. In Tagungsband des 16. Holztechnologischen Kolloquiums (pp. 76–89). Dresden: TU Dresden, Institut für Holz- und Papiertechnik.' bjps: 'Riegel A, Dekomien K and Huxol A (2014) Beitrag zur sensorischen Gütebestimmung von rohen und beschichteten Holz- und Holzwerkstoffoberflächen. Tagungsband des 16. Holztechnologischen Kolloquiums. Dresden: TU Dresden, Institut für Holz- und Papiertechnik, pp. 76–89.' chicago: 'Riegel, Adrian, Kerstin Dekomien, and Andrea Huxol. “Beitrag zur sensorischen Gütebestimmung von rohen und beschichteten Holz- und Holzwerkstoffoberflächen.” In Tagungsband des 16. Holztechnologischen Kolloquiums, 76–89. Dresden: TU Dresden, Institut für Holz- und Papiertechnik, 2014.' chicago-de: 'Riegel, Adrian, Kerstin Dekomien und Andrea Huxol. 2014. Beitrag zur sensorischen Gütebestimmung von rohen und beschichteten Holz- und Holzwerkstoffoberflächen. In: Tagungsband des 16. Holztechnologischen Kolloquiums, 76–89. Dresden: TU Dresden, Institut für Holz- und Papiertechnik.' din1505-2-1: 'Riegel, Adrian ; Dekomien, Kerstin ; Huxol, Andrea: Beitrag zur sensorischen Gütebestimmung von rohen und beschichteten Holz- und Holzwerkstoffoberflächen. In: Tagungsband des 16. Holztechnologischen Kolloquiums. Dresden : TU Dresden, Institut für Holz- und Papiertechnik, 2014, S. 76–89' havard: 'A. Riegel, K. Dekomien, A. Huxol, Beitrag zur sensorischen Gütebestimmung von rohen und beschichteten Holz- und Holzwerkstoffoberflächen, in: Tagungsband des 16. Holztechnologischen Kolloquiums, TU Dresden, Institut für Holz- und Papiertechnik, Dresden, 2014: pp. 76–89.' ieee: A. Riegel, K. Dekomien, and A. Huxol, “Beitrag zur sensorischen Gütebestimmung von rohen und beschichteten Holz- und Holzwerkstoffoberflächen,” in Tagungsband des 16. Holztechnologischen Kolloquiums, 2014, pp. 76–89. mla: Riegel, Adrian, et al. “Beitrag zur sensorischen Gütebestimmung von rohen und beschichteten Holz- und Holzwerkstoffoberflächen.” Tagungsband des 16. Holztechnologischen Kolloquiums, TU Dresden, Institut für Holz- und Papiertechnik, 2014, pp. 76–89. short: 'A. Riegel, K. Dekomien, A. Huxol, in: Tagungsband des 16. Holztechnologischen Kolloquiums, TU Dresden, Institut für Holz- und Papiertechnik, Dresden, 2014, pp. 76–89.' ufg: 'Riegel, Adrian et. al. (2014): Beitrag zur sensorischen Gütebestimmung von rohen und beschichteten Holz- und Holzwerkstoffoberflächen, in: Tagungsband des 16. Holztechnologischen Kolloquiums, Dresden, S. 76–89.' van: 'Riegel A, Dekomien K, Huxol A. Beitrag zur sensorischen Gütebestimmung von rohen und beschichteten Holz- und Holzwerkstoffoberflächen. In: Tagungsband des 16 Holztechnologischen Kolloquiums. Dresden: TU Dresden, Institut für Holz- und Papiertechnik; 2014. p. 76–89.' date_created: 2020-11-03T09:36:49Z date_updated: 2023-03-15T13:49:48Z ddc: - '620' department: - _id: DEP7019 file: - access_level: local content_type: application/pdf creator: czr-e2t date_created: 2020-11-03T09:40:59Z date_updated: 2020-11-03T09:40:59Z file_id: '3787' file_name: riegelbeitrag.pdf file_size: 7408918 relation: main_file file_date_updated: 2020-11-03T09:40:59Z has_accepted_license: '1' language: - iso: ger page: 76 - 89 place: Dresden publication: Tagungsband des 16. Holztechnologischen Kolloquiums publication_identifier: isbn: - 978-3-86780-385-4 publication_status: published publisher: TU Dresden, Institut für Holz- und Papiertechnik status: public title: Beitrag zur sensorischen Gütebestimmung von rohen und beschichteten Holz- und Holzwerkstoffoberflächen type: conference user_id: '74004' year: 2014 ... --- _id: '3792' author: - first_name: Kerstin full_name: Dekomien, Kerstin id: '11293' last_name: Dekomien - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Sebastian full_name: Schulz, Sebastian last_name: Schulz - first_name: Adrian full_name: Riegel, Adrian id: '14647' last_name: Riegel citation: ama: 'Dekomien K, Huxol A, Schulz S, Riegel A. LEARNING FROM GEOGRAPHY - TOPOGRAPHY AS A BASIS FOR QUALITY ASSESSMENT OF HIGH GLOSS SURFACES. In: Padoano E, Villmer F-J, eds. Production Engineering and Management. Proceedings 4th International Conference. 25.- 26.09.2014 in Lemgo. Vol 10. Schriftenreihe Logistik. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft; 2014:155-166.' apa: 'Dekomien, K., Huxol, A., Schulz, S., & Riegel, A. (2014). LEARNING FROM GEOGRAPHY - TOPOGRAPHY AS A BASIS FOR QUALITY ASSESSMENT OF HIGH GLOSS SURFACES. In E. Padoano & F.-J. Villmer (Eds.), Production Engineering and Management. Proceedings 4th International Conference. 25.- 26.09.2014 in Lemgo (Vol. 10, pp. 155–166). Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft.' bjps: 'Dekomien K et al. (2014) LEARNING FROM GEOGRAPHY - TOPOGRAPHY AS A BASIS FOR QUALITY ASSESSMENT OF HIGH GLOSS SURFACES. In Padoano E and Villmer F-J (eds), Production Engineering and Management. Proceedings 4th International Conference. 25.- 26.09.2014 in Lemgo, vol. 10. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft, pp. 155–166.' chicago: 'Dekomien, Kerstin, Andrea Huxol, Sebastian Schulz, and Adrian Riegel. “LEARNING FROM GEOGRAPHY - TOPOGRAPHY AS A BASIS FOR QUALITY ASSESSMENT OF HIGH GLOSS SURFACES.” In Production Engineering and Management. Proceedings 4th International Conference. 25.- 26.09.2014 in Lemgo, edited by Elio Padoano and Franz-Josef Villmer, 10:155–66. Schriftenreihe Logistik. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft, 2014.' chicago-de: 'Dekomien, Kerstin, Andrea Huxol, Sebastian Schulz und Adrian Riegel. 2014. LEARNING FROM GEOGRAPHY - TOPOGRAPHY AS A BASIS FOR QUALITY ASSESSMENT OF HIGH GLOSS SURFACES. In: Production Engineering and Management. Proceedings 4th International Conference. 25.- 26.09.2014 in Lemgo, hg. von Elio Padoano und Franz-Josef Villmer, 10:155–166. Schriftenreihe Logistik. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft.' din1505-2-1: 'Dekomien, Kerstin ; Huxol, Andrea ; Schulz, Sebastian ; Riegel, Adrian: LEARNING FROM GEOGRAPHY - TOPOGRAPHY AS A BASIS FOR QUALITY ASSESSMENT OF HIGH GLOSS SURFACES. In: Padoano, E. ; Villmer, F.-J. (Hrsg.): Production Engineering and Management. Proceedings 4th International Conference. 25.- 26.09.2014 in Lemgo, Schriftenreihe Logistik. Bd. 10. Lemgo : Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft, 2014, S. 155–166' havard: 'K. Dekomien, A. Huxol, S. Schulz, A. Riegel, LEARNING FROM GEOGRAPHY - TOPOGRAPHY AS A BASIS FOR QUALITY ASSESSMENT OF HIGH GLOSS SURFACES, in: E. Padoano, F.-J. Villmer (Eds.), Production Engineering and Management. Proceedings 4th International Conference. 25.- 26.09.2014 in Lemgo, Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft, Lemgo, 2014: pp. 155–166.' ieee: K. Dekomien, A. Huxol, S. Schulz, and A. Riegel, “LEARNING FROM GEOGRAPHY - TOPOGRAPHY AS A BASIS FOR QUALITY ASSESSMENT OF HIGH GLOSS SURFACES,” in Production Engineering and Management. Proceedings 4th International Conference. 25.- 26.09.2014 in Lemgo, Lemgo, 2014, vol. 10, no. 10, pp. 155–166. mla: Dekomien, Kerstin, et al. “LEARNING FROM GEOGRAPHY - TOPOGRAPHY AS A BASIS FOR QUALITY ASSESSMENT OF HIGH GLOSS SURFACES.” Production Engineering and Management. Proceedings 4th International Conference. 25.- 26.09.2014 in Lemgo, edited by Elio Padoano and Franz-Josef Villmer, vol. 10, no. 10, Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft, 2014, pp. 155–66. short: 'K. Dekomien, A. Huxol, S. Schulz, A. Riegel, in: E. Padoano, F.-J. Villmer (Eds.), Production Engineering and Management. Proceedings 4th International Conference. 25.- 26.09.2014 in Lemgo, Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft, Lemgo, 2014, pp. 155–166.' ufg: 'Dekomien, Kerstin et. al. (2014): LEARNING FROM GEOGRAPHY - TOPOGRAPHY AS A BASIS FOR QUALITY ASSESSMENT OF HIGH GLOSS SURFACES, in: Elio Padoano/Franz-Josef Villmer (Hgg.): Production Engineering and Management. Proceedings 4th International Conference. 25.- 26.09.2014 in Lemgo (=Schriftenreihe Logistik 10), Lemgo, S. 155–166.' van: 'Dekomien K, Huxol A, Schulz S, Riegel A. LEARNING FROM GEOGRAPHY - TOPOGRAPHY AS A BASIS FOR QUALITY ASSESSMENT OF HIGH GLOSS SURFACES. In: Padoano E, Villmer F-J, editors. Production Engineering and Management Proceedings 4th International Conference 25- 26092014 in Lemgo. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft; 2014. p. 155–66. (Schriftenreihe Logistik; vol. 10).' conference: end_date: 2014-09-26 location: Lemgo name: Production Engineering and Management. Proceedings 4th International Conference start_date: 2014-09-25 date_created: 2020-11-03T09:52:32Z date_updated: 2023-03-15T13:49:48Z ddc: - '330' department: - _id: DEP7019 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer file: - access_level: local content_type: application/pdf creator: czr-e2t date_created: 2020-11-03T09:57:59Z date_updated: 2020-11-03T09:57:59Z file_id: '3793' file_name: BA005.pdf file_size: 370461 relation: main_file file_date_updated: 2020-11-03T09:57:59Z has_accepted_license: '1' intvolume: ' 10' issue: '10' language: - iso: eng page: 155 - 166 place: Lemgo publication: Production Engineering and Management. Proceedings 4th International Conference. 25.- 26.09.2014 in Lemgo publication_identifier: isbn: - 978-3-941645-10-3 publication_status: published publisher: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft series_title: Schriftenreihe Logistik status: public title: LEARNING FROM GEOGRAPHY - TOPOGRAPHY AS A BASIS FOR QUALITY ASSESSMENT OF HIGH GLOSS SURFACES type: conference user_id: '74004' volume: 10 year: 2014 ... --- _id: '3796' author: - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Kerstin full_name: Dekomien, Kerstin id: '11293' last_name: Dekomien - first_name: Sebastian full_name: Schulz, Sebastian last_name: Schulz - first_name: Adrian full_name: Riegel, Adrian id: '14647' last_name: Riegel citation: ama: Huxol A, Dekomien K, Schulz S, Riegel A. Beyond the human eye. Developing topographical measurements to assess high gloss surfaces for furniture. European Coatings Journal. 2014;(11):18-22. apa: Huxol, A., Dekomien, K., Schulz, S., & Riegel, A. (2014). Beyond the human eye. Developing topographical measurements to assess high gloss surfaces for furniture. European Coatings Journal, (11), 18–22. bjps: Huxol A et al. (2014) Beyond the Human Eye. Developing Topographical Measurements to Assess High Gloss Surfaces for Furniture. European Coatings Journal 18–22. chicago: 'Huxol, Andrea, Kerstin Dekomien, Sebastian Schulz, and Adrian Riegel. “Beyond the Human Eye. Developing Topographical Measurements to Assess High Gloss Surfaces for Furniture.” European Coatings Journal, no. 11 (2014): 18–22.' chicago-de: 'Huxol, Andrea, Kerstin Dekomien, Sebastian Schulz und Adrian Riegel. 2014. Beyond the human eye. Developing topographical measurements to assess high gloss surfaces for furniture. European Coatings Journal, Nr. 11: 18–22.' din1505-2-1: 'Huxol, Andrea ; Dekomien, Kerstin ; Schulz, Sebastian ; Riegel, Adrian: Beyond the human eye. Developing topographical measurements to assess high gloss surfaces for furniture. In: European Coatings Journal (2014), Nr. 11, S. 18–22' havard: A. Huxol, K. Dekomien, S. Schulz, A. Riegel, Beyond the human eye. Developing topographical measurements to assess high gloss surfaces for furniture., European Coatings Journal. (2014) 18–22. ieee: A. Huxol, K. Dekomien, S. Schulz, and A. Riegel, “Beyond the human eye. Developing topographical measurements to assess high gloss surfaces for furniture.,” European Coatings Journal, no. 11, pp. 18–22, 2014. mla: Huxol, Andrea, et al. “Beyond the Human Eye. Developing Topographical Measurements to Assess High Gloss Surfaces for Furniture.” European Coatings Journal, no. 11, 2014, pp. 18–22. short: A. Huxol, K. Dekomien, S. Schulz, A. Riegel, European Coatings Journal (2014) 18–22. ufg: 'Huxol, Andrea et. al. (2014): Beyond the human eye. Developing topographical measurements to assess high gloss surfaces for furniture., in: European Coatings Journal (11), S. 18–22.' van: Huxol A, Dekomien K, Schulz S, Riegel A. Beyond the human eye. Developing topographical measurements to assess high gloss surfaces for furniture. European Coatings Journal. 2014;(11):18–22. date_created: 2020-11-03T10:04:14Z date_updated: 2023-03-15T13:49:48Z ddc: - '330' department: - _id: DEP7019 file: - access_level: local content_type: application/pdf creator: czr-e2t date_created: 2020-11-03T10:05:38Z date_updated: 2020-11-03T10:05:38Z file_id: '3797' file_name: BA003(1).pdf file_size: 1130791 relation: main_file file_date_updated: 2020-11-03T10:05:38Z has_accepted_license: '1' issue: '11' language: - iso: eng page: 18 - 22 publication: European Coatings Journal publication_identifier: issn: - 0930-3847 publication_status: published status: public title: Beyond the human eye. Developing topographical measurements to assess high gloss surfaces for furniture. type: journal_article user_id: '74004' year: 2014 ... --- _id: '3798' author: - first_name: Adrian full_name: Riegel, Adrian id: '14647' last_name: Riegel - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Kerstin full_name: Dekomien, Kerstin id: '11293' last_name: Dekomien - first_name: Sebastian full_name: Schulz, Sebastian last_name: Schulz citation: ama: Riegel A, Huxol A, Dekomien K, Schulz S. Subjektiv wahrnehmen - objektiv messen. Hochglanzbeschichtungen - Qualitätsprüfung der Anmutungsleistung von Hochglanzoberflächen. Farbe und Lack. 2014;120(8):44-51. apa: Riegel, A., Huxol, A., Dekomien, K., & Schulz, S. (2014). Subjektiv wahrnehmen - objektiv messen. Hochglanzbeschichtungen - Qualitätsprüfung der Anmutungsleistung von Hochglanzoberflächen. Farbe und Lack, 120(8), 44–51. bjps: Riegel A et al. (2014) Subjektiv wahrnehmen - objektiv messen. Hochglanzbeschichtungen - Qualitätsprüfung der Anmutungsleistung von Hochglanzoberflächen. Farbe und Lack 120, 44–51. chicago: 'Riegel, Adrian, Andrea Huxol, Kerstin Dekomien, and Sebastian Schulz. “Subjektiv wahrnehmen - objektiv messen. Hochglanzbeschichtungen - Qualitätsprüfung der Anmutungsleistung von Hochglanzoberflächen.” Farbe und Lack 120, no. 8 (2014): 44–51.' chicago-de: 'Riegel, Adrian, Andrea Huxol, Kerstin Dekomien und Sebastian Schulz. 2014. Subjektiv wahrnehmen - objektiv messen. Hochglanzbeschichtungen - Qualitätsprüfung der Anmutungsleistung von Hochglanzoberflächen. Farbe und Lack 120, Nr. 8: 44–51.' din1505-2-1: 'Riegel, Adrian ; Huxol, Andrea ; Dekomien, Kerstin ; Schulz, Sebastian: Subjektiv wahrnehmen - objektiv messen. Hochglanzbeschichtungen - Qualitätsprüfung der Anmutungsleistung von Hochglanzoberflächen. In: Farbe und Lack Bd. 120. Hannover, Vincentz (2014), Nr. 8, S. 44–51' havard: A. Riegel, A. Huxol, K. Dekomien, S. Schulz, Subjektiv wahrnehmen - objektiv messen. Hochglanzbeschichtungen - Qualitätsprüfung der Anmutungsleistung von Hochglanzoberflächen, Farbe und Lack. 120 (2014) 44–51. ieee: A. Riegel, A. Huxol, K. Dekomien, and S. Schulz, “Subjektiv wahrnehmen - objektiv messen. Hochglanzbeschichtungen - Qualitätsprüfung der Anmutungsleistung von Hochglanzoberflächen,” Farbe und Lack, vol. 120, no. 8, pp. 44–51, 2014. mla: Riegel, Adrian, et al. “Subjektiv wahrnehmen - objektiv messen. Hochglanzbeschichtungen - Qualitätsprüfung der Anmutungsleistung von Hochglanzoberflächen.” Farbe und Lack, vol. 120, no. 8, Vincentz, 2014, pp. 44–51. short: A. Riegel, A. Huxol, K. Dekomien, S. Schulz, Farbe und Lack 120 (2014) 44–51. ufg: 'Riegel, Adrian et. al. (2014): Subjektiv wahrnehmen - objektiv messen. Hochglanzbeschichtungen - Qualitätsprüfung der Anmutungsleistung von Hochglanzoberflächen, in: Farbe und Lack 120 (8), S. 44–51.' van: Riegel A, Huxol A, Dekomien K, Schulz S. Subjektiv wahrnehmen - objektiv messen. Hochglanzbeschichtungen - Qualitätsprüfung der Anmutungsleistung von Hochglanzoberflächen. Farbe und Lack. 2014;120(8):44–51. date_created: 2020-11-03T10:06:54Z date_updated: 2023-03-15T13:49:48Z ddc: - '330' department: - _id: DEP7019 file: - access_level: local content_type: application/pdf creator: czr-e2t date_created: 2020-11-03T10:08:52Z date_updated: 2020-11-03T10:08:52Z file_id: '3800' file_name: BA002.pdf file_size: 898270 relation: main_file file_date_updated: 2020-11-03T10:08:52Z has_accepted_license: '1' intvolume: ' 120' issue: '8' language: - iso: ger page: 44 - 51 place: Hannover publication: Farbe und Lack publication_identifier: issn: - 0014-7699 publication_status: published publisher: Vincentz status: public title: Subjektiv wahrnehmen - objektiv messen. Hochglanzbeschichtungen - Qualitätsprüfung der Anmutungsleistung von Hochglanzoberflächen type: journal_article user_id: '74004' volume: 120 year: 2014 ... --- _id: '3810' abstract: - lang: eng text: The quality sensation regarding to high gloss surfaces is mainly influenced by the optical impression. For the evaluation of this multifactorial property currently no standard methodical procedure is defined. Present some measurement as well as sensory evaluations are used for the quality assessment of high gloss surfaces. Regarding to Six Sigma, for proper customer satisfaction the voice of the customer needs to be transferred into specific product criteria which are measurable. Associated to the research project "Development of a global quality concept for furniture high gloss surfaces" at the University of Applied Science Ostwestfalen-Lippe possible customers were asked to rank some high gloss samples according to their quality perception. In addition these high gloss surfaces were gauged by common measurements. Building up the basis for a comprehensive quality scale by the analysis of correlations between the measured values and the quality impression of the customers is the subject matter. The waviness of a high gloss surface seems to be an appropriate indicator for perceive quality. For end users brilliance an even surface and the absence of errors are attributes of an upmarket high gloss surface. Whatever the suface is not the tangible criterion for the purchase decision of furniture in general, design, production quality and price, which are directly affected by surface properties, are more clinches. author: - first_name: Katharina full_name: Herzberg, Katharina last_name: Herzberg - first_name: Kerstin full_name: Dekomien, Kerstin id: '11293' last_name: Dekomien - first_name: Andrea full_name: Huxol, Andrea id: '43559' last_name: Huxol - first_name: Adrian full_name: Riegel, Adrian id: '14647' last_name: Riegel citation: ama: 'Herzberg K, Dekomien K, Huxol A, Riegel A. HIGH GLOSS SURFACES: VALID QUALITY EVALUATION. In: Padoano E, Villmer F-J, eds. Production Engineering and Management Proceedings 3rd International Conference 26th and 27th September 2013 Trieste, Italy. Vol 9. Schriftenreihe Logistik. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft; 2014:207-218.' apa: 'Herzberg, K., Dekomien, K., Huxol, A., & Riegel, A. (2014). HIGH GLOSS SURFACES: VALID QUALITY EVALUATION. In E. Padoano & F.-J. Villmer (Eds.), Production engineering and management proceedings 3rd international conference 26th and 27th September 2013 Trieste, Italy (Vol. 9, pp. 207–218). Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft.' bjps: 'Herzberg K et al. (2014) HIGH GLOSS SURFACES: VALID QUALITY EVALUATION. In Padoano E and Villmer F-J (eds), Production Engineering and Management Proceedings 3rd International Conference 26th and 27th September 2013 Trieste, Italy, vol. 9. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft, pp. 207–218.' chicago: 'Herzberg, Katharina, Kerstin Dekomien, Andrea Huxol, and Adrian Riegel. “HIGH GLOSS SURFACES: VALID QUALITY EVALUATION.” In Production Engineering and Management Proceedings 3rd International Conference 26th and 27th September 2013 Trieste, Italy, edited by Elio Padoano and Franz-Josef Villmer, 9:207–18. Schriftenreihe Logistik. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft, 2014.' chicago-de: 'Herzberg, Katharina, Kerstin Dekomien, Andrea Huxol und Adrian Riegel. 2014. HIGH GLOSS SURFACES: VALID QUALITY EVALUATION. In: Production engineering and management proceedings 3rd international conference 26th and 27th September 2013 Trieste, Italy, hg. von Elio Padoano und Franz-Josef Villmer, 9:207–218. Schriftenreihe Logistik. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft.' din1505-2-1: 'Herzberg, Katharina ; Dekomien, Kerstin ; Huxol, Andrea ; Riegel, Adrian: HIGH GLOSS SURFACES: VALID QUALITY EVALUATION. In: Padoano, E. ; Villmer, F.-J. (Hrsg.): Production engineering and management proceedings 3rd international conference 26th and 27th September 2013 Trieste, Italy, Schriftenreihe Logistik. Bd. 9. Lemgo : Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft, 2014, S. 207–218' havard: 'K. Herzberg, K. Dekomien, A. Huxol, A. Riegel, HIGH GLOSS SURFACES: VALID QUALITY EVALUATION, in: E. Padoano, F.-J. Villmer (Eds.), Production Engineering and Management Proceedings 3rd International Conference 26th and 27th September 2013 Trieste, Italy, Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft, Lemgo, 2014: pp. 207–218.' ieee: 'K. Herzberg, K. Dekomien, A. Huxol, and A. Riegel, “HIGH GLOSS SURFACES: VALID QUALITY EVALUATION,” in Production engineering and management proceedings 3rd international conference 26th and 27th September 2013 Trieste, Italy, Trieste, Italy, 2014, vol. 9, no. 7, pp. 207–218.' mla: 'Herzberg, Katharina, et al. “HIGH GLOSS SURFACES: VALID QUALITY EVALUATION.” Production Engineering and Management Proceedings 3rd International Conference 26th and 27th September 2013 Trieste, Italy, edited by Elio Padoano and Franz-Josef Villmer, vol. 9, no. 7, Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft, 2014, pp. 207–18.' short: 'K. Herzberg, K. Dekomien, A. Huxol, A. Riegel, in: E. Padoano, F.-J. Villmer (Eds.), Production Engineering and Management Proceedings 3rd International Conference 26th and 27th September 2013 Trieste, Italy, Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft, Lemgo, 2014, pp. 207–218.' ufg: 'Herzberg, Katharina et. al. (2014): HIGH GLOSS SURFACES: VALID QUALITY EVALUATION, in: Elio Padoano/Franz-Josef Villmer (Hgg.): Production engineering and management proceedings 3rd international conference 26th and 27th September 2013 Trieste, Italy (=Schriftenreihe Logistik 9), Lemgo, S. 207–218.' van: 'Herzberg K, Dekomien K, Huxol A, Riegel A. HIGH GLOSS SURFACES: VALID QUALITY EVALUATION. In: Padoano E, Villmer F-J, editors. Production engineering and management proceedings 3rd international conference 26th and 27th September 2013 Trieste, Italy. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft; 2014. p. 207–18. (Schriftenreihe Logistik; vol. 9).' conference: end_date: 2013-09-27 location: Trieste, Italy name: Production engineering and management proceedings 3rd international conference start_date: 2013-09-26 date_created: 2020-11-03T10:28:47Z date_updated: 2023-03-15T13:49:49Z ddc: - '330' department: - _id: DEP7019 editor: - first_name: Elio full_name: Padoano, Elio last_name: Padoano - first_name: Franz-Josef full_name: Villmer, Franz-Josef last_name: Villmer file: - access_level: local content_type: application/pdf creator: czr-e2t date_created: 2020-11-03T10:30:55Z date_updated: 2020-11-03T10:30:55Z file_id: '3811' file_name: 207.pdf file_size: 4836100 relation: main_file file_date_updated: 2020-11-03T10:30:55Z has_accepted_license: '1' intvolume: ' 9' issue: '7' language: - iso: eng page: 207 - 218 place: Lemgo publication: Production engineering and management proceedings 3rd international conference 26th and 27th September 2013 Trieste, Italy publication_identifier: isbn: - 978-3-941645-09-7 publication_status: published publisher: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft series_title: Schriftenreihe Logistik status: public title: 'HIGH GLOSS SURFACES: VALID QUALITY EVALUATION' type: conference user_id: '74004' volume: 9 year: 2014 ...