---
_id: '3808'
abstract:
- lang: eng
text: Time and resources are already an important issue in wooden industry and handicraft
tl1at will become more and more important the next years. Components for furniture
production, particularly in the industrial sector, are usually manufactured in
automated process chains. State- of-the-art for drilling is the usage of systems
with bevels, belt drives, angle gears and rigid drilling units. Due to the operating
direction and slow working cycles, drilling processes are the bottleneck of production.
These rigid drilling gears are currently very intensive in maintenance and inflexible
because their spindles are usually mechanically coupled , which leads to unnecessary
and excessive energy consumption. Another problem with systems currently in use
is the huge amount of setup costs. They are required to adjust drilling units
on different components. This leads to an impairment of productivity of the entire
manufacturing process. At this point the question arises how quality and efficiency
of the drilling process can be increased. lt is obvious that the drilling process
must be made more intelligent and more flexible. An approach for an optimized
drilling process is the use of self-optimizing spindles in future. Therefore a
detailed analysis of drilling processes and the development of an eligible feed
control are required. According to these requirements a laboratory machine was
developed and furthermore the theoretical and practical state-of-the-art of drilling
processes were analyzed. To develop a self-optimization for drilling spindles
a research project is currently being realized in cooperation between the Laboratory
for Woodworking Technologies and Machinery (HS-OWL, Germany)), the Laboratory
for Power Electronics and Electrical Drives (HS-OWL, Germany) and the Wittenstein
motion control GmbH (Bad Pyrrnont, Germany).
author:
- first_name: Dennis
full_name: Bursch, Dennis
last_name: Bursch
- first_name: Adrian
full_name: Riegel, Adrian
id: '14647'
last_name: Riegel
- first_name: Holger
full_name: Borcherding, Holger
id: '1693'
last_name: Borcherding
- first_name: Volker
full_name: Akemeier, Volker
id: '52377'
last_name: Akemeier
citation:
ama: 'Bursch D, Riegel A, Borcherding H, Akemeier V. INTELLIGENT DRILLING- DIRECT-DRIVEN,
SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY. In: Padoano
E, Villmer F-J, eds. Production Engineering and Management Proceedings 3rd
International Conference 26th and 27th September 2013 Trieste, Italy. Vol
9. Schriftenreihe Logistik. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich
Produktion und Wirtschaft; 2014:91-102.'
apa: 'Bursch, D., Riegel, A., Borcherding, H., & Akemeier, V. (2014). INTELLIGENT
DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE
INDUSTRY. In E. Padoano & F.-J. Villmer (Eds.), Production engineering
and management proceedings 3rd international conference 26th and 27th September
2013 Trieste, Italy (Vol. 9, pp. 91–102). Lemgo: Hochschule Ostwestfalen-Lippe,
Fachbereich Produktion und Wirtschaft.'
bjps: 'Bursch D et al. (2014) INTELLIGENT DRILLING- DIRECT-DRIVEN,
SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY. In Padoano
E and Villmer F-J (eds), Production Engineering and Management Proceedings
3rd International Conference 26th and 27th September 2013 Trieste, Italy,
vol. 9. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft,
pp. 91–102.'
chicago: 'Bursch, Dennis, Adrian Riegel, Holger Borcherding, and Volker Akemeier.
“INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES
FOR FURNITURE INDUSTRY.” In Production Engineering and Management Proceedings
3rd International Conference 26th and 27th September 2013 Trieste, Italy,
edited by Elio Padoano and Franz-Josef Villmer, 9:91–102. Schriftenreihe Logistik.
Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft, 2014.'
chicago-de: 'Bursch, Dennis, Adrian Riegel, Holger Borcherding und Volker Akemeier.
2014. INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING
SPINDLES FOR FURNITURE INDUSTRY. In: Production engineering and management
proceedings 3rd international conference 26th and 27th September 2013 Trieste,
Italy, hg. von Elio Padoano und Franz-Josef Villmer, 9:91–102. Schriftenreihe
Logistik. Lemgo: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft.'
din1505-2-1: 'Bursch, Dennis ; Riegel, Adrian ; Borcherding,
Holger ; Akemeier, Volker:
INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES
FOR FURNITURE INDUSTRY. In: Padoano, E.
; Villmer, F.-J. (Hrsg.): Production
engineering and management proceedings 3rd international conference 26th and 27th
September 2013 Trieste, Italy, Schriftenreihe Logistik. Bd. 9. Lemgo :
Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft, 2014, S. 91–102'
havard: 'D. Bursch, A. Riegel, H. Borcherding, V. Akemeier, INTELLIGENT DRILLING-
DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY,
in: E. Padoano, F.-J. Villmer (Eds.), Production Engineering and Management Proceedings
3rd International Conference 26th and 27th September 2013 Trieste, Italy, Hochschule
Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft, Lemgo, 2014: pp. 91–102.'
ieee: D. Bursch, A. Riegel, H. Borcherding, and V. Akemeier, “INTELLIGENT DRILLING-
DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY,”
in Production engineering and management proceedings 3rd international conference
26th and 27th September 2013 Trieste, Italy, Trieste, Italy, 2014, vol. 9,
no. 3, pp. 91–102.
mla: Bursch, Dennis, et al. “INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING
HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY.” Production Engineering
and Management Proceedings 3rd International Conference 26th and 27th September
2013 Trieste, Italy, edited by Elio Padoano and Franz-Josef Villmer, vol.
9, no. 3, Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft,
2014, pp. 91–102.
short: 'D. Bursch, A. Riegel, H. Borcherding, V. Akemeier, in: E. Padoano, F.-J.
Villmer (Eds.), Production Engineering and Management Proceedings 3rd International
Conference 26th and 27th September 2013 Trieste, Italy, Hochschule Ostwestfalen-Lippe,
Fachbereich Produktion und Wirtschaft, Lemgo, 2014, pp. 91–102.'
ufg: 'Bursch, Dennis et. al. (2014): INTELLIGENT DRILLING- DIRECT-DRIVEN,
SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY, in: Elio Padoano/Franz-Josef
Villmer (Hgg.): Production engineering and management proceedings 3rd international
conference 26th and 27th September 2013 Trieste, Italy (=Schriftenreihe
Logistik 9), Lemgo, S. 91–102.'
van: 'Bursch D, Riegel A, Borcherding H, Akemeier V. INTELLIGENT DRILLING- DIRECT-DRIVEN,
SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY. In: Padoano
E, Villmer F-J, editors. Production engineering and management proceedings 3rd
international conference 26th and 27th September 2013 Trieste, Italy. Lemgo: Hochschule
Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft; 2014. p. 91–102. (Schriftenreihe
Logistik; vol. 9).'
conference:
end_date: 2013-09-27
location: Trieste, Italy
name: Production engineering and management proceedings 3rd international conference
start_date: 2013-09-26
date_created: 2020-11-03T10:24:19Z
date_updated: 2023-03-15T13:49:48Z
ddc:
- '330'
department:
- _id: DEP7019
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
file:
- access_level: local
content_type: application/pdf
creator: czr-e2t
date_created: 2020-11-03T10:26:49Z
date_updated: 2020-11-03T10:26:49Z
file_id: '3809'
file_name: 91.pdf
file_size: 4728605
relation: main_file
file_date_updated: 2020-11-03T10:26:49Z
has_accepted_license: '1'
intvolume: ' 9'
issue: '3'
language:
- iso: eng
page: 91 - 102
place: Lemgo
publication: Production engineering and management proceedings 3rd international conference
26th and 27th September 2013 Trieste, Italy
publication_identifier:
isbn:
- 978-3-941645-09-7
publication_status: published
publisher: Hochschule Ostwestfalen-Lippe, Fachbereich Produktion und Wirtschaft
series_title: Schriftenreihe Logistik
status: public
title: INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES
FOR FURNITURE INDUSTRY
type: conference
user_id: '74004'
volume: 9
year: 2014
...
---
_id: '4203'
author:
- first_name: Dennis
full_name: Bursch, Dennis
last_name: Bursch
- first_name: Adrian
full_name: Riegel, Adrian
id: '14647'
last_name: Riegel
- first_name: Holger
full_name: Borcherding, Holger
id: '1693'
last_name: Borcherding
- first_name: Volker
full_name: Akemeier, Volker
id: '52377'
last_name: Akemeier
citation:
ama: 'Bursch D, Riegel A, Borcherding H, Akemeier V. INTELLIGENT DRILLING- DIRECT-DRIVEN,
SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY. In: Padoano
E, Villmer F-J, eds. Production Engineering and Management Proceedings 3rd
International Conference 26th and 27th September 2013 Trieste, Italy. ; 2013:91-102.'
apa: Bursch, D., Riegel, A., Borcherding, H., & Akemeier, V. (2013). INTELLIGENT
DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE
INDUSTRY. In E. Padoano & F.-J. Villmer (Eds.), Production engineering
and management proceedings 3rd international conference 26th and 27th September
2013 Trieste, Italy (pp. 91–102). Trieste, Italy.
bjps: Bursch D et al. (2013) INTELLIGENT DRILLING- DIRECT-DRIVEN,
SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY. In Padoano
E and Villmer F-J (eds), Production Engineering and Management Proceedings
3rd International Conference 26th and 27th September 2013 Trieste, Italy.
pp. 91–102.
chicago: Bursch, Dennis, Adrian Riegel, Holger Borcherding, and Volker Akemeier.
“INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES
FOR FURNITURE INDUSTRY.” In Production Engineering and Management Proceedings
3rd International Conference 26th and 27th September 2013 Trieste, Italy,
edited by Elio Padoano and Franz-Josef Villmer, 91–102, 2013.
chicago-de: 'Bursch, Dennis, Adrian Riegel, Holger Borcherding und Volker Akemeier.
2013. INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING
SPINDLES FOR FURNITURE INDUSTRY. In: Production engineering and management
proceedings 3rd international conference 26th and 27th September 2013 Trieste,
Italy, hg. von Elio Padoano und Franz-Josef Villmer, 91–102.'
din1505-2-1: 'Bursch, Dennis ; Riegel, Adrian ; Borcherding,
Holger ; Akemeier, Volker:
INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES
FOR FURNITURE INDUSTRY. In: Padoano, E.
; Villmer, F.-J. (Hrsg.): Production
engineering and management proceedings 3rd international conference 26th and 27th
September 2013 Trieste, Italy, 2013, S. 91–102'
havard: 'D. Bursch, A. Riegel, H. Borcherding, V. Akemeier, INTELLIGENT DRILLING-
DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY,
in: E. Padoano, F.-J. Villmer (Eds.), Production Engineering and Management Proceedings
3rd International Conference 26th and 27th September 2013 Trieste, Italy, 2013:
pp. 91–102.'
ieee: D. Bursch, A. Riegel, H. Borcherding, and V. Akemeier, “INTELLIGENT DRILLING-
DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY,”
in Production engineering and management proceedings 3rd international conference
26th and 27th September 2013 Trieste, Italy, Trieste, Italy, 2013, pp. 91–102.
mla: Bursch, Dennis, et al. “INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING
HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY.” Production Engineering
and Management Proceedings 3rd International Conference 26th and 27th September
2013 Trieste, Italy, edited by Elio Padoano and Franz-Josef Villmer, 2013,
pp. 91–102.
short: 'D. Bursch, A. Riegel, H. Borcherding, V. Akemeier, in: E. Padoano, F.-J.
Villmer (Eds.), Production Engineering and Management Proceedings 3rd International
Conference 26th and 27th September 2013 Trieste, Italy, 2013, pp. 91–102.'
ufg: 'Bursch, Dennis et. al. (2013): INTELLIGENT DRILLING- DIRECT-DRIVEN,
SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY, in: Elio Padoano/Franz-Josef
Villmer (Hgg.): Production engineering and management proceedings 3rd international
conference 26th and 27th September 2013 Trieste, Italy, S. 91–102.'
van: 'Bursch D, Riegel A, Borcherding H, Akemeier V. INTELLIGENT DRILLING- DIRECT-DRIVEN,
SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES FOR FURNITURE INDUSTRY. In: Padoano
E, Villmer F-J, editors. Production engineering and management proceedings 3rd
international conference 26th and 27th September 2013 Trieste, Italy. 2013. p.
91–102.'
conference:
end_date: 2013-09-27
location: Trieste, Italy
name: 3rd international conference of Production engineering and management proceedings
start_date: 2013-09-26
date_created: 2020-12-08T10:35:51Z
date_updated: 2023-03-15T13:49:51Z
ddc:
- '330'
department:
- _id: DEP6020
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
file:
- access_level: local
content_type: application/pdf
creator: czr-e2t
date_created: 2020-12-08T10:39:01Z
date_updated: 2020-12-08T10:39:01Z
file_id: '4204'
file_name: 91.pdf
file_size: 4728605
relation: main_file
file_date_updated: 2020-12-08T10:39:01Z
has_accepted_license: '1'
language:
- iso: eng
page: 91 - 102
publication: Production engineering and management proceedings 3rd international conference
26th and 27th September 2013 Trieste, Italy
publication_identifier:
isbn:
- 978-3-941645-09-7
publication_status: published
status: public
title: INTELLIGENT DRILLING- DIRECT-DRIVEN, SELFOPTIMIZING HIGH-SPEED DRILLING SPINDLES
FOR FURNITURE INDUSTRY
type: conference
user_id: '74004'
year: 2013
...