@misc{12049,
  author       = {{Borcherding, Holger and Springer, André and Müller, Tobias and Ehlert, Patrick}},
  pages        = {{26}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{3D-Metalcore-LDS-Circuit-Board; 3D-Leiterkartenaufbau mittels Polymerbeschichtungen von Metallsubstraten und Laser-Direkt-Strukturierung für kompakte leistungselektronische Applikationen : FHprofUnt 2018 : 3D-MC²B : Schlussbericht : Laufzeit des Vorhabens: 01.08.19 bis 31.10.22}}},
  doi          = {{10.2314/KXP:1881717380}},
  year         = {{2023}},
}

@misc{10545,
  abstract     = {{Additive manufacturing provides a lucrative alternative for manufacturing of functional prototypes. This paper emonstrates the manufacturing and characterization of hollow core waveguide prototypes with circular cross section using suitable metal and polymers for Terahertz sensing applications. These additively manufactured waveguide prototypes are characterized from 0.1 to 1.25 THz to evaluate the attenuation and coupling losses.}},
  author       = {{Shrotri, Abhijeet Narendra and Mukherjee, Amlan kusum and Lohöfener, Sven and Springer, André and Stübbe, Oliver and Preu, Sascha}},
  booktitle    = {{IRMMW-THz 2023 : 48th International Conference on Infrared, Millimeter and Terahertz Waves : 17-22 September 2023, Montreal, Quebec, Canada}},
  editor       = {{Cooke, David G.}},
  isbn         = {{979-8-3503-3660-3}},
  issn         = {{2162-2035 }},
  location     = {{Montreal, Canada}},
  publisher    = {{IEEE}},
  title        = {{{Additive manufacturing and characterization of hollow core metal and topas waveguides for Terahertz sensor systems}}},
  doi          = {{10.1109/IRMMW-THz57677.2023.10299134}},
  year         = {{2023}},
}

@misc{7844,
  abstract     = {{The CMID (Coated Metal Interconnected Device) technology described here has its origins in MID (Moulded Intercon-
nected Device) technology, which in itself is based on laser direct structuring (LDS). CMIDs are metallic base bodies 
coated with LDS-compatiblepowder, allowing conductor paths to be structured and metallised on the coating. The metallic base bodies enable the heat management to be optimised and allow power electronic topologies to be implemented in addition to control electronics. Furthermore, in the context of 3D electronics, miniaturisation can be advanced through the use of unused spaces and housing parts. This is shown by manufacturing techniques and demonstrators of motor integrated inverters.}},
  author       = {{Borcherding, Holger and Springer, André and Müller, Tobias and Ehlert, Patrick and Tolksdorf, Andreas}},
  booktitle    = {{	 ETG-Fb. 165: CIPS 2022 : 12th International Conference on Integrated Power Electronics Systems, Proceedings, March, 15 – 17, 2022, Berlin, Germany}},
  isbn         = {{978-3-8007-5757-2}},
  location     = {{Berlin}},
  pages        = {{500--507}},
  publisher    = {{VDE-Verlag}},
  title        = {{{Integration of power electronic circuits using Coated Metal Interconnect Devices (CMID)}}},
  volume       = {{165}},
  year         = {{2022}},
}

@misc{7841,
  author       = {{Hemmelgarn, Florian and Ehlert, Patrick and Mager, Thomas and Jurgenhake, Christoph and Dumitrescu, Roman and Springer, André}},
  booktitle    = {{14th International Congress Molded Interconnect Devices (MID)}},
  location     = {{Amberg}},
  publisher    = {{IEEE}},
  title        = {{{Evaluation of different additive manufacturing technologies for MIDs in the context of smart sensor systems for retrofit applications}}},
  doi          = {{10.1109/mid50463.2021.9361628}},
  year         = {{2021}},
}

@misc{7843,
  author       = {{Ehlert, Patrick and Hemmelgarn, Florian and Mager, Thomas and Jürgenhake, Christoph and Wißbrock, Horst and Springer, André}},
  location     = {{Nürnberg}},
  publisher    = {{Forschungsvereinigung Räumliche Elektronische Baugruppen 3-D MID e.V.}},
  title        = {{{Entwicklung maßgeschneiderter Sensorsysteme für Retrofit-Anwendungen}}},
  year         = {{2021}},
}

@misc{7911,
  author       = {{Stosch, Martin and Springer, André and Villmer, Franz-Josef and Meier, Matthias and Kiwitt, Constanze and Plate, Sebastian and Ehlert, Patrick}},
  pages        = {{19}},
  title        = {{{3D-Druck auf Holz. (DE102019113340A1)}}},
  year         = {{2020}},
}

@misc{7845,
  author       = {{Springer, André}},
  location     = {{Lemgo}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Retrofit durch 3D-Druck}}},
  year         = {{2019}},
}

@misc{7847,
  author       = {{Seffer, Oliver and Springer, André and Kaierle, Stefan}},
  booktitle    = {{Journal of Laser Applications}},
  issn         = {{1042-346X}},
  number       = {{3}},
  publisher    = {{Laser Institute of America (LIA)}},
  title        = {{{Investigations on remote laser beam welding of dissimilar joints of austenitic chromium-nickel steel (X5CrNi18-10) and aluminum alloy (AA6082-T6) for battery housings}}},
  doi          = {{10.2351/1.5040638}},
  volume       = {{30}},
  year         = {{2018}},
}

@misc{7848,
  author       = {{Nothdurft, Sarah and Springer, André and Kaierle, Stefan and Ohrdes, Hendrik and Twiefel, Jens and Wallaschek, Jörg and Mildebrath, Maximilian and Maier, Hans Jürgen and Hassel, Thomas and Overmeyer, Ludger}},
  booktitle    = {{Journal of Laser Applications}},
  issn         = {{1042-346X}},
  number       = {{3}},
  publisher    = {{Laser Institute of America (LIA)}},
  title        = {{{Laser welding of dissimilar low-alloyed steel-steel butt joints and the effects of beam position and ultrasound excitation on the microstructure}}},
  doi          = {{10.2351/1.5040607}},
  volume       = {{30}},
  year         = {{2018}},
}

@misc{7849,
  author       = {{Lahdo, Rabi and Springer, André and Meier, Oliver and Kaierle, Stefan and Overmeyer, Ludger}},
  booktitle    = {{Journal of Laser Applications}},
  issn         = {{1042-346X}},
  publisher    = {{Laser Institute of America (LIA)}},
  title        = {{{Investigations on laser welding of dissimilar joints of steel and aluminum using a high-power diode laser}}},
  doi          = {{10.2351/1.5040643}},
  year         = {{2018}},
}

@misc{549,
  author       = {{Springer, André and Nothdurft, Sarah and Lahdo, Rabi and Seffer, Oliver}},
  booktitle    = {{8th International Conference on Production Engineering and Management}},
  isbn         = {{978-3-946856-03-0}},
  keywords     = {{Dissimilar metal joints, Laser processes, Multi-material components}},
  location     = {{Lemgo}},
  publisher    = {{Technische Hochschule Ostwestfalen-Lippe}},
  title        = {{{Dissimilar Metal Joints - Laser Based Manufacturing Processes for Components of Tomorrow}}},
  year         = {{2018}},
}

@misc{7850,
  author       = {{Krämer, Manuel and Müller, Christian W. and Hermann, Maike and Decker, Sebastian and Springer, André and Overmeyer, Ludger and Hurschler, Christof and Pfeifer, Ronny}},
  booktitle    = {{Journal of the Mechanical Behavior of Biomedical Materials}},
  issn         = {{1751-6161}},
  number       = {{November}},
  pages        = {{558--566}},
  publisher    = {{Elsevier}},
  title        = {{{Design considerations for a novel shape-memory-plate osteosynthesis allowing for non-invasive alteration of bending stiffness}}},
  doi          = {{10.1016/j.jmbbm.2017.08.024}},
  volume       = {{75}},
  year         = {{2017}},
}

@misc{7851,
  abstract     = {{Most of today’s technical parts and components are made of monolithic materials. These mono-material components produced in established production processes reach their limits due to their respective material characteristics. Thus, a significant increase in production quality and efficiency can only be achieved by combining different materials in one part. Bulk forming of previously joined semi-finished products to net shape hybrid components that consist of two different materials is a promising method to produce parts with locally optimized characteristics. This new production process chain offers a number of advantages compared to conventional manufacturing technologies. Examples are the production of specific load-adapted forged parts with a high level of material utilization and an impact on the joining zone caused by the following forming process. This paper describes the production process of serially arranged hybrid steel parts, produced by combining a laser welding process with a subsequent cross wedge rolling process. The presented results are only a first approach in order to get first insights in the forming behaviour of laser welded and cross wedge rolled parts. The investigated material combination is C22 (1.0402) and 20MnCr5 (1.7147). This innovative process chain enables the production of hybrid parts. To evaluate the developed process chain, the weld and the joining zone is analysed before and after cross wedge rolling. Main results are that the joining process using laser welding enables a strong bonding between the two materials with a higher hardness in the joining zone than for the individual materials. After the forming process, the bonding of the joining zone is still present, while the hardness decreased but remains higher than of the materials themselves.}},
  author       = {{Blohm, Thoms and Nothdurft, Sarah and Mildebrath, Maximilian and Ohrdes, Hendrik and Richter, Johannes and Stonis, Malte and Langner, Jan and Springer, André and Kaierle, Stefan and Hassel, Thomas and Wallaschek, Jörg and Overmeyer, Ludger and Behrens, Bernd-Arno}},
  booktitle    = {{ 	 International journal of material forming : official Journal of the European Scientific Association for material FORMing (ESAFORM) }},
  issn         = {{1960-6214}},
  keywords     = {{Process chain, Laser welding, Hybrid parts, Dissimilar joints, Cross wedge rolling}},
  number       = {{11}},
  pages        = {{829--837}},
  publisher    = {{Springer}},
  title        = {{{Investigation of the joining zone of laser welded and cross wedge rolled hybrid parts}}},
  doi          = {{10.1007/s12289-017-1393-0}},
  year         = {{2017}},
}

@misc{7852,
  author       = {{Seffer, Oliver and Springer, André and Kaierle, Stefan}},
  booktitle    = {{Journal of Laser Applications}},
  issn         = {{1042-346X}},
  publisher    = {{Laser Institute of America (LIA)}},
  title        = {{{Investigations on remote laser beam welding of dissimilar joints of aluminum alloys and steel with varying sheet thicknesses for car body construction}}},
  doi          = {{10.2351/1.4983241}},
  volume       = {{29}},
  year         = {{2017}},
}

@inbook{7869,
  author       = {{Nothdurft, Sarah and Springer, André and Kaierle, Stefan}},
  booktitle    = {{Advances in Laser Materials Processing}},
  editor       = {{Lawrence, Jonathan R.}},
  isbn         = {{978-0-08-101252-9}},
  publisher    = {{Woodhead Publishing Ltd}},
  title        = {{{Influencing the weld pool during laser welding}}},
  year         = {{2017}},
}

@misc{7871,
  author       = {{Nothdurft, Sarah and Seffer, Oliver and Pfeifer, Ronny and Springer, André and Kaierle, Stefan}},
  booktitle    = {{Schweißen und Schneiden}},
  issn         = {{0036-7184 }},
  number       = {{9}},
  pages        = {{600 -- 607}},
  publisher    = {{DVS Media}},
  title        = {{{Leichtbau durch laserstrahlgefügte Stahl-Aluminium-Mischverbindungen}}},
  volume       = {{69}},
  year         = {{2017}},
}

@misc{7884,
  author       = {{Behrens, B.-A. and Ross, J. and Langner, J. and Kaierle, S. and Springer, André and Nothdurft, S.}},
  booktitle    = {{Tagungsband TB-044}},
  isbn         = {{978-3-86776-503-9}},
  location     = {{Fellbach}},
  pages        = {{125–132}},
  publisher    = {{37. EFB-Kolloquium Blechverarbeitung}},
  title        = {{{Innenhochdruckumformte laserstrahlgelötete Tailored Hybrid Tubes aus Stahl-Aluminium-Mischverbindungen für den automobilen Leichtbau}}},
  year         = {{2017}},
}

@misc{7885,
  author       = {{Nothdurft, S. and Springer, André and Kaierle, S. and Overmeyer, L. and Mildebrath, M. and Maier, H. J. and Hassel, T. and Ohrdes, H. and Wallaschek, J.}},
  booktitle    = {{Fortschrittsberichte der Materialforschung und Werkstofftechnik Band 4}},
  isbn         = {{978-3-8440-5069-1}},
  location     = {{Clausthal-Zellerfeld}},
  pages        = {{259–268}},
  publisher    = {{Shaker Verlag}},
  title        = {{{Beeinflussung des Schmelzbades von Mischverbindungen im Laserstrahlschweißprozess durch Ultraschall}}},
  year         = {{2017}},
}

@misc{7887,
  author       = {{Seffer, Oliver and Springer, André and Kaierle, Stefan}},
  booktitle    = {{Fortschrittsberichte der Materialforschung und Werkstofftechnik Band 4}},
  isbn         = {{978-3-8440-5069-1}},
  location     = {{Clausthal-Zellerfeld}},
  pages        = {{269–284}},
  publisher    = {{Shaker Verlag}},
  title        = {{{Untersuchungen zum Remote-Laserstrahlschweißen artungleicher Verbindungen an unterschiedlichen Stahl- und Aluminiumwerkstoffen aus dem Karosseriebau}}},
  year         = {{2017}},
}

@book{7888,
  author       = {{Kaierle, Stefan and Nothdurft, Sarah and Springer, André and Behrens, Bernd-Arno and Langner, Jan and Ross, Jonathan and Stonis, Malte}},
  isbn         = {{978-3-86776-511-4}},
  pages        = {{66, XVI}},
  publisher    = {{Europäische Forschungsgesellschaft für Blechverarbeitung e.V. }},
  title        = {{{Innenhochdruckumformen laserstrahlgelöteter Tailored Hybrid Tubes aus Stahl/Aluminium-Mischverbindungen für den automobilen Leichtbau}}},
  volume       = {{461}},
  year         = {{2017}},
}

@misc{7853,
  author       = {{Hennigs, Christian and Lahdo, Rabi and Springer, André and Kaierle, Stefan and Hustedt, Michael and Brand, Helmut and Wloka, Richard and Zobel, Frank and Dültgen, Peter}},
  booktitle    = {{SPIE Proceedings}},
  editor       = {{Dorsch, Friedhelm and Kaierle, Stefan}},
  issn         = {{0277-786X}},
  location     = {{San Francisco, California, United States}},
  publisher    = {{Society of Photo-Optical Instrumentation Engineers (SPIE)}},
  title        = {{{Laser-based gluing of diamond-tipped saw blades}}},
  doi          = {{10.1117/12.2212842}},
  year         = {{2016}},
}

@misc{7854,
  author       = {{Nothdurft, Sarah and Springer, André and Kaierle, Stefan and Ross, Jonathan and Stonis, Malte}},
  booktitle    = {{Journal of Laser Applications}},
  issn         = {{1042-346X}},
  publisher    = {{Laser Institute of America (LIA)}},
  title        = {{{Laser soldering and brazing of steel-aluminum sheets for tailored hybrid tubes}}},
  doi          = {{10.2351/1.4943996}},
  year         = {{2016}},
}

@misc{7855,
  author       = {{Lahdo, Rabi and Springer, André and Pfeifer, Ronny and Kaierle, Stefan and Overmeyer, Ludger}},
  booktitle    = {{Physics Procedia}},
  issn         = {{1875-3892}},
  pages        = {{396--405}},
  publisher    = {{Elsevier}},
  title        = {{{High-power Laser Welding of Thick Steel-aluminum Dissimilar Joints}}},
  doi          = {{10.1016/j.phpro.2016.08.041}},
  year         = {{2016}},
}

@misc{7856,
  author       = {{Hennigs, Christian and Lahdo, Rabi and Springer, André and Hustedt, Michael and Kaierle, Stefan and Brand, Helmut and Zobel, Frank and Wloka, Richard and Dültgen, Peter}},
  booktitle    = {{adhäsion KLEBEN & DICHTEN}},
  issn         = {{1619-1919}},
  pages        = {{22--27}},
  publisher    = {{Springer}},
  title        = {{{Schleifsegmente laserbasiert kleben : Neuer Prozess zum Bestücken von Diamant-Trennschleifscheiben}}},
  doi          = {{10.1007/s35145-015-0607-1}},
  volume       = {{60}},
  year         = {{2016}},
}

@misc{7857,
  author       = {{Seffer, Oliver and Pfeifer, Ronny and Springer, André and Kaierle, Stefan}},
  booktitle    = {{Physics Procedia}},
  issn         = {{1875-3892}},
  pages        = {{383--395}},
  publisher    = {{Elsevier}},
  title        = {{{Investigations on Laser Beam Welding of Different Dissimilar Joints of Steel and Aluminum Alloys for Automotive Lightweight Construction}}},
  doi          = {{10.1016/j.phpro.2016.08.040}},
  volume       = {{83}},
  year         = {{2016}},
}

@misc{7858,
  author       = {{Lahdo, Rabi and Seffer, Oliver and Springer, André and Kaierle, Stefan and Collmann, Mareike and Schaumann, Peter}},
  booktitle    = {{Stahlbau}},
  issn         = {{0038-9145}},
  number       = {{12}},
  pages        = {{1016--1022}},
  publisher    = {{Wiley}},
  title        = {{{Laserstrahl-MSG-Hybridschweißen von Feinkornbaustählen für den Einsatz im Stahlbau}}},
  doi          = {{10.1002/stab.201510344}},
  volume       = {{84}},
  year         = {{2015}},
}

@misc{7859,
  author       = {{Behm, Velten and Hoffmann, Gerd-Albert and Trzebiatowski, Jürgen von and Springer, André and Kaierle, Stefan and Overmeyer, Ludger}},
  booktitle    = {{Journal of Laser Applications}},
  issn         = {{1042-346X}},
  publisher    = {{Laser Institute of America (LIA)}},
  title        = {{{Method for evaluating the behavior of laser welded dissimilar material seams in single overlap configuration under impact loads by the example of twinning induced plasticity steels}}},
  doi          = {{10.2351/1.4906384}},
  year         = {{2015}},
}

@book{7883,
  author       = {{Kracht, Dietmar and Kaierle, Stefan and Springer, André and Seffer, Oliver and Lahdo, Rabi and Nacke, B. and Schülbe, H. and Neumeyer, J. and Schaumann, P and Collmann, M}},
  isbn         = {{978-3-942541-58-9}},
  pages        = {{191}},
  publisher    = {{Verl. und Vertriebsges.}},
  title        = {{{Prozesssicheres und leistungsstarkes Fügen von hochfesten Feinkornbaustählen durch ein Hybridschweißverfahren mit integrierter Vorwärmung}}},
  volume       = {{P 838}},
  year         = {{2015}},
}

@misc{7889,
  author       = {{Ross, J. and Nothdurft, S. and Stonis, M. and Springer, André and Kaierle, S. and Behrens, B.-A.}},
  booktitle    = {{Tagungsband T 40 - Intermezzo der hybriden Werkstofflösungen: Hat Blech eine Zukunft?}},
  isbn         = {{978-3-86776-452-0}},
  location     = {{Bad Boll}},
  pages        = {{175–184}},
  publisher    = {{EFB}},
  title        = {{{Innenhochdruckumformen laserstrahlgelöteter Tailored Hybrid Tubes aus Stahl-Alu-minium-Mischverbindungen für den automobilen Leichtbau}}},
  year         = {{2015}},
}

@misc{7860,
  author       = {{Behm, Velten and Höfemann, Matthias and Hatscher, Ansgar and Springer, André and Kaierle, Stefan and Hein, David and Otto, Manuel and Overmeyer, Ludger}},
  booktitle    = {{Physics Procedia}},
  issn         = {{1875-3892}},
  pages        = {{610--619}},
  publisher    = {{Elsevier}},
  title        = {{{Investigations on Laser Beam Welding Dissimilar Material Combinations of Austenitic High Manganese (FeMn) and Ferrite Steels}}},
  doi          = {{10.1016/j.phpro.2014.08.049}},
  volume       = {{56}},
  year         = {{2014}},
}

@misc{7861,
  author       = {{Seffer, Oliver and Lahdo, Rabi and Springer, André and Kaierle, Stefan}},
  booktitle    = {{Journal of Laser Applications}},
  issn         = {{1042-346X}},
  publisher    = {{Laser Institute of America (LIA)}},
  title        = {{{Laser-GMA hybrid welding of API 5L X70 with 23 mm plate thickness using 16 kW disk laser and two GMA welding power sources}}},
  doi          = {{10.2351/1.4895638}},
  year         = {{2014}},
}

@misc{7862,
  author       = {{Lahdo, Rabi and Seffer, Oliver and Springer, André and Kaierle, Stefan and Overmeyer, Ludger}},
  booktitle    = {{Physics Procedia}},
  issn         = {{1875-3892}},
  pages        = {{637--645}},
  publisher    = {{Elsevier}},
  title        = {{{GMA-laser Hybrid Welding of High-strength Fine-grain Structural Steel with an Inductive Preheating}}},
  doi          = {{10.1016/j.phpro.2014.08.060}},
  volume       = {{56}},
  year         = {{2014}},
}

@phdthesis{7872,
  author       = {{Springer, André}},
  isbn         = {{978-3-944586-90-8}},
  publisher    = {{PZH Verlag}},
  title        = {{{Laserstrahlschweißen der Mischverbindung Aluminium-Kupfer für thermische Solarabsorber}}},
  volume       = {{Band 05/2014}},
  year         = {{2014}},
}

@misc{7882,
  author       = {{Lahdo, Rabi and Seffer, Oliver and Springer, André and Kaierle, Stefan and Collmann, M. and Schaumann, P. and Neumeyer, J. and Schülbe, H. and Nacke, B.}},
  booktitle    = {{DVS Congress}},
  isbn         = {{978-3-945023-03-7}},
  location     = {{Berlin}},
  pages        = {{203--209}},
  publisher    = {{DVS Media}},
  title        = {{{Induktionsunterstütztes MSG-Laser-Hybridschweißen zur Modifizierung der mechanisch-technologischen Eigenschaften von hochfesten Feinkornbaustählen im Dickblechbereich}}},
  volume       = {{Band 306}},
  year         = {{2014}},
}

@misc{7863,
  author       = {{Schimek, Mitja and Springer, André and Pfeifer, Ronny and Kaierle, Stefan}},
  booktitle    = {{SPIE Proceedings}},
  editor       = {{Dorsch, Friedhelm}},
  issn         = {{0277-786X}},
  location     = {{San Francisco, California, United States}},
  publisher    = {{SPIE}},
  title        = {{{Laser welding of dissimilar materials for lightweight construction and special applications}}},
  doi          = {{10.1117/12.2006335}},
  year         = {{2013}},
}

@misc{7881,
  author       = {{Seffer, Oliver and Lahdo, Rabi and Schneider, Friedrich and Springer, André and Kaierle, Stefan}},
  booktitle    = {{Proceedings of the 6th International Congress on Laser Advanced Materials Processing (LAMP)}},
  location     = {{Niigata, Japan}},
  publisher    = {{6th International Congress on Laser Advanced Materials Processing (LAMP)}},
  title        = {{{Laser MIG Welding Process Combination for Thick Wall Applications of the Aluminum Alloy EN AW 6082 T6}}},
  year         = {{2013}},
}

@misc{7864,
  author       = {{Schimek, Mitja and Springer, André and Kaierle, Stefan and Kracht, Dietmar and Wesling, Volker}},
  booktitle    = {{Physics Procedia}},
  issn         = {{1875-3892}},
  pages        = {{43--50}},
  publisher    = {{Elsevier}},
  title        = {{{Laser-welded Dissimilar Steel-aluminum Seams for Automotive Lightweight Construction}}},
  doi          = {{10.1016/j.phpro.2012.10.012}},
  volume       = {{39}},
  year         = {{2012}},
}

@misc{7865,
  author       = {{Springer, André and Kallage, Peter and Hustedt, Michael and Barcikowski, Stephan and Wesling, Volker and Haferkamp, Heinz}},
  booktitle    = {{Journal of Laser Applications}},
  issn         = {{1042-346X}},
  publisher    = {{Laser Institute of America (LIA)}},
  title        = {{{Development of new processes for welding of thermal Al–Cu solar absorbers using diode lasers}}},
  doi          = {{10.2351/1.4736588}},
  year         = {{2012}},
}

@misc{7877,
  author       = {{Springer, André and Hustedt, Michael and Wesling, Volker and Haferkamp, Heinz}},
  booktitle    = {{22. Symposium Thermische Solarenergie}},
  editor       = {{Vajen, Klaus}},
  isbn         = {{978-3-941785-89-2}},
  location     = {{Bad Staffelstein}},
  publisher    = {{OTTI}},
  title        = {{{Schweißen von Al-Cu Solarabsorbern mittels Diodenlaserstrahlung}}},
  year         = {{2012}},
}

@misc{7874,
  author       = {{Springer, André and Hustedt, Michael}},
  booktitle    = {{Laser Magazin}},
  issn         = {{0945-8875}},
  number       = {{2}},
  pages        = {{10--12}},
  publisher    = {{Hightech Publications}},
  title        = {{{Schweißen von Solarabsorbern mit Diodenlasern}}},
  volume       = {{28}},
  year         = {{2011}},
}

@misc{7878,
  author       = {{Springer, André and Kallage, Peter and Barcikowski, Stephan and Haferkamp, Heinz}},
  location     = {{Berlin}},
  publisher    = {{1st Solar Thermal Materials, Equipment and Technology Conference (SMEThermal)}},
  title        = {{{Copper-aluminium absorbers: how to weld using diode lasers}}},
  year         = {{2011}},
}

@misc{7866,
  author       = {{Hellmig, Ralph J. and Janecek, Miloš and Hadzima, Branislav and Gendelman, Oleg V. and Shapiro, Michael and Molodova, Xenia and Springer, André and Estrin, Yuri}},
  booktitle    = {{MATERIALS TRANSACTIONS}},
  issn         = {{1345-9678}},
  number       = {{1}},
  pages        = {{31--37}},
  publisher    = {{The Japan Institute of Metals and Materials}},
  title        = {{{A Portrait of Copper Processed by Equal Channel Angular Pressing}}},
  doi          = {{10.2320/matertrans.me200717}},
  volume       = {{49}},
  year         = {{2007}},
}